3682 files changed, 200846 insertions, 136361 deletions

diff --git a/src/3rdparty/android/extract.h b/src/3rdparty/android/extract.h
new file mode 100644
index 0000000000..938ef9abfd
--- /dev/null
+++ b/src/3rdparty/android/extract.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2005 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef EXTRACT_H
+#define EXTRACT_H
+
+#include <cstdint>
+#include <cstring>
+// shamelessly stolen from ResourceTypes.h Android's sources
+/**
+ * This chunk specifies how to split an image into segments for
+ * scaling.
+ *
+ * There are J horizontal and K vertical segments.  These segments divide
+ * the image into J*K regions as follows (where J=4 and K=3):
+ *
+ *      F0   S0    F1     S1
+ *   +-----+----+------+-------+
+ * S2|  0  |  1 |  2   |   3   |
+ *   +-----+----+------+-------+
+ *   |     |    |      |       |
+ *   |     |    |      |       |
+ * F2|  4  |  5 |  6   |   7   |
+ *   |     |    |      |       |
+ *   |     |    |      |       |
+ *   +-----+----+------+-------+
+ * S3|  8  |  9 |  10  |   11  |
+ *   +-----+----+------+-------+
+ *
+ * Each horizontal and vertical segment is considered to by either
+ * stretchable (marked by the Sx labels) or fixed (marked by the Fy
+ * labels), in the horizontal or vertical axis, respectively. In the
+ * above example, the first is horizontal segment (F0) is fixed, the
+ * next is stretchable and then they continue to alternate. Note that
+ * the segment list for each axis can begin or end with a stretchable
+ * or fixed segment.
+ *
+ * The relative sizes of the stretchy segments indicates the relative
+ * amount of stretchiness of the regions bordered by the segments.  For
+ * example, regions 3, 7 and 11 above will take up more horizontal space
+ * than regions 1, 5 and 9 since the horizontal segment associated with
+ * the first set of regions is larger than the other set of regions.  The
+ * ratios of the amount of horizontal (or vertical) space taken by any
+ * two stretchable slices is exactly the ratio of their corresponding
+ * segment lengths.
+ *
+ * xDivs and yDivs point to arrays of horizontal and vertical pixel
+ * indices.  The first pair of Divs (in either array) indicate the
+ * starting and ending points of the first stretchable segment in that
+ * axis. The next pair specifies the next stretchable segment, etc. So
+ * in the above example xDiv[0] and xDiv[1] specify the horizontal
+ * coordinates for the regions labeled 1, 5 and 9.  xDiv[2] and
+ * xDiv[3] specify the coordinates for regions 3, 7 and 11. Note that
+ * the leftmost slices always start at x=0 and the rightmost slices
+ * always end at the end of the image. So, for example, the regions 0,
+ * 4 and 8 (which are fixed along the X axis) start at x value 0 and
+ * go to xDiv[0] and slices 2, 6 and 10 start at xDiv[1] and end at
+ * xDiv[2].
+ *
+ * The array pointed to by the colors field lists contains hints for
+ * each of the regions.  They are ordered according left-to-right and
+ * top-to-bottom as indicated above. For each segment that is a solid
+ * color the array entry will contain that color value; otherwise it
+ * will contain NO_COLOR.  Segments that are completely transparent
+ * will always have the value TRANSPARENT_COLOR.
+ *
+ * The PNG chunk type is "npTc".
+ */
+struct Res_png_9patch
+{
+    Res_png_9patch() : wasDeserialized(false), xDivs(NULL),
+                       yDivs(NULL), colors(NULL) { }
+
+    int8_t wasDeserialized;
+    int8_t numXDivs;
+    int8_t numYDivs;
+    int8_t numColors;
+
+    // These tell where the next section of a patch starts.
+    // For example, the first patch includes the pixels from
+    // 0 to xDivs[0]-1 and the second patch includes the pixels
+    // from xDivs[0] to xDivs[1]-1.
+    // Note: allocation/free of these pointers is left to the caller.
+    int32_t* xDivs;
+    int32_t* yDivs;
+
+    int32_t paddingLeft, paddingRight;
+    int32_t paddingTop, paddingBottom;
+
+    enum {
+        // The 9 patch segment is not a solid color.
+        NO_COLOR = 0x00000001,
+
+        // The 9 patch segment is completely transparent.
+        TRANSPARENT_COLOR = 0x00000000
+    };
+    // Note: allocation/free of this pointer is left to the caller.
+    uint32_t* colors;
+
+    // Deserialize/Unmarshall the patch data
+    static Res_png_9patch* deserialize(const void* data);
+};
+
+struct Res_png_9patch20
+{
+    Res_png_9patch20() : wasDeserialized(false), numXDivs(0), numYDivs(0), numColors(0), xDivsOffset(0),
+                       yDivsOffset(0),paddingLeft(0), paddingRight(0), paddingTop(0), paddingBottom(0),
+                       colorsOffset(0) { }
+
+    int8_t wasDeserialized;
+    int8_t numXDivs;
+    int8_t numYDivs;
+    int8_t numColors;
+
+    // The offset (from the start of this structure) to the xDivs & yDivs
+    // array for this 9patch. To get a pointer to this array, call
+    // getXDivs or getYDivs. Note that the serialized form for 9patches places
+    // the xDivs, yDivs and colors arrays immediately after the location
+    // of the Res_png_9patch struct.
+    uint32_t xDivsOffset;
+    uint32_t yDivsOffset;
+
+    int32_t paddingLeft, paddingRight;
+    int32_t paddingTop, paddingBottom;
+
+    enum {
+        // The 9 patch segment is not a solid color.
+        NO_COLOR = 0x00000001,
+
+        // The 9 patch segment is completely transparent.
+        TRANSPARENT_COLOR = 0x00000000
+    };
+
+    // The offset (from the start of this structure) to the colors array
+    // for this 9patch.
+    uint32_t colorsOffset;
+
+    // Deserialize/Unmarshall the patch data
+    static Res_png_9patch20* deserialize(void* data);
+
+    // These tell where the next section of a patch starts.
+    // For example, the first patch includes the pixels from
+    // 0 to xDivs[0]-1 and the second patch includes the pixels
+    // from xDivs[0] to xDivs[1]-1.
+    inline int32_t* getXDivs() const {
+        return reinterpret_cast<int32_t*>(reinterpret_cast<uintptr_t>(this) + xDivsOffset);
+    }
+    inline int32_t* getYDivs() const {
+        return reinterpret_cast<int32_t*>(reinterpret_cast<uintptr_t>(this) + yDivsOffset);
+    }
+    inline uint32_t* getColors() const {
+        return reinterpret_cast<uint32_t*>(reinterpret_cast<uintptr_t>(this) + colorsOffset);
+    }
+
+} __attribute__((packed));
+
+#endif
diff --git a/src/3rdparty/angle/.gitignore b/src/3rdparty/angle/.gitignore
index b108d54d93..cbb7e6a5af 100644
--- a/src/3rdparty/angle/.gitignore
+++ b/src/3rdparty/angle/.gitignore
@@ -16,28 +16,17 @@ DEPS
 *.gypi
 *.sh
 *.bat
+*.patch
+*.py
 codereview.settings
 
 # Generated by flex/bison
 src/compiler/preprocessor/Tokenizer.cpp
 src/compiler/preprocessor/ExpressionParser.cpp
-src/compiler/glslang_lex.cpp
-src/compiler/glslang_tab.cpp
-src/compiler/glslang_tab.h
+src/compiler/translator/glslang_lex.cpp
+src/compiler/translator/glslang_tab.cpp
+src/compiler/translator/glslang_tab.h
 
 # Generated by FXC
-src/libGLESv2/renderer/shaders/compiled/standardvs.h
-src/libGLESv2/renderer/shaders/compiled/flipyvs.h
-src/libGLESv2/renderer/shaders/compiled/luminanceps.h
-src/libGLESv2/renderer/shaders/compiled/componentmaskps.h
-src/libGLESv2/renderer/shaders/compiled/passthroughps.h
-src/libGLESv2/renderer/shaders/compiled/PassthroughRGBA11ps.h
-src/libGLESv2/renderer/shaders/compiled/PassthroughRGB11ps.h
-src/libGLESv2/renderer/shaders/compiled/PassthroughLumAlpha11ps.h
-src/libGLESv2/renderer/shaders/compiled/PassthroughLum11ps.h
-src/libGLESv2/renderer/shaders/compiled/Passthrough11vs.h
-src/libGLESv2/renderer/shaders/compiled/clear11vs.h
-src/libGLESv2/renderer/shaders/compiled/clearmultiple11ps.h
-src/libGLESv2/renderer/shaders/compiled/clearsingle11ps.h
-
-
+src/libGLESv2/renderer/d3d/d3d9/shaders/compiled/*.h
+src/libGLESv2/renderer/d3d/d3d11/shaders/compiled/*.h
diff --git a/src/3rdparty/angle/AUTHORS b/src/3rdparty/angle/AUTHORS
index 0bdb65ee9a..b79bb5d161 100644
--- a/src/3rdparty/angle/AUTHORS
+++ b/src/3rdparty/angle/AUTHORS
@@ -20,6 +20,7 @@ Intel Corporation
 Mozilla Corporation
 Turbulenz
 Klarälvdalens Datakonsult AB
+Microsoft Open Technologies, Inc.
 
 Jacek Caban
 Mark Callow
diff --git a/src/3rdparty/angle/CONTRIBUTORS b/src/3rdparty/angle/CONTRIBUTORS
index fcb6315234..0cae10a0f6 100644
--- a/src/3rdparty/angle/CONTRIBUTORS
+++ b/src/3rdparty/angle/CONTRIBUTORS
@@ -52,10 +52,14 @@ Autodesk, Inc.
 Cloud Party, Inc.
  Conor Dickinson
 
+Digia Plc
+ Andrew Knight
+
 Intel Corporation
  Jin Yang
  Andy Chen
  Josh Triplett
+ Sudarsana Nagineni
 
 Klarälvdalens Datakonsult AB
  Milian Wolff
@@ -75,3 +79,6 @@ Ulrik Persson (ddefrostt)
 Mark Banner (standard8mbp)
 David Kilzer
 
+Microsoft Open Technologies, Inc.
+Cooper Partin
+Austin Kinross
diff --git a/src/3rdparty/angle/include/EGL/egl.h b/src/3rdparty/angle/include/EGL/egl.h
index 99ea342a47..ab2f0cdfbe 100644
--- a/src/3rdparty/angle/include/EGL/egl.h
+++ b/src/3rdparty/angle/include/EGL/egl.h
@@ -1,11 +1,12 @@
-/* -*- mode: c; tab-width: 8; -*- */
-/* vi: set sw=4 ts=8: */
-/* Reference version of egl.h for EGL 1.4.
- * $Revision: 9356 $ on $Date: 2009-10-21 02:52:25 -0700 (Wed, 21 Oct 2009) $
- */
+#ifndef __egl_h_
+#define __egl_h_ 1
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 /*
-** Copyright (c) 2007-2009 The Khronos Group Inc.
+** Copyright (c) 2013-2014 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -26,304 +27,272 @@
 ** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 ** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
 */
+/*
+** This header is generated from the Khronos OpenGL / OpenGL ES XML
+** API Registry. The current version of the Registry, generator scripts
+** used to make the header, and the header can be found at
+**   http://www.opengl.org/registry/
+**
+** Khronos $Revision: 27018 $ on $Date: 2014-06-10 08:06:12 -0700 (Tue, 10 Jun 2014) $
+*/
 
-#ifndef __egl_h_
-#define __egl_h_
-
-/* All platform-dependent types and macro boilerplate (such as EGLAPI
- * and EGLAPIENTRY) should go in eglplatform.h.
- */
 #include <EGL/eglplatform.h>
 
-#ifdef __cplusplus
-extern "C" {
-#endif
+/* Generated on date 20140610 */
+
+/* Generated C header for:
+ * API: egl
+ * Versions considered: .*
+ * Versions emitted: .*
+ * Default extensions included: None
+ * Additional extensions included: _nomatch_^
+ * Extensions removed: _nomatch_^
+ */
 
-/* EGL Types */
-/* EGLint is defined in eglplatform.h */
+#ifndef EGL_VERSION_1_0
+#define EGL_VERSION_1_0 1
 typedef unsigned int EGLBoolean;
-typedef unsigned int EGLenum;
-typedef void *EGLConfig;
-typedef void *EGLContext;
 typedef void *EGLDisplay;
+#include <KHR/khrplatform.h>
+#include <EGL/eglplatform.h>
+typedef void *EGLConfig;
 typedef void *EGLSurface;
-typedef void *EGLClientBuffer;
-
-/* EGL Versioning */
-#define EGL_VERSION_1_0			1
-#define EGL_VERSION_1_1			1
-#define EGL_VERSION_1_2			1
-#define EGL_VERSION_1_3			1
-#define EGL_VERSION_1_4			1
-
-/* EGL Enumerants. Bitmasks and other exceptional cases aside, most
- * enums are assigned unique values starting at 0x3000.
- */
-
-/* EGL aliases */
-#define EGL_FALSE			0
-#define EGL_TRUE			1
-
-/* Out-of-band handle values */
-#define EGL_DEFAULT_DISPLAY		((EGLNativeDisplayType)0)
-#define EGL_NO_CONTEXT			((EGLContext)0)
-#define EGL_NO_DISPLAY			((EGLDisplay)0)
-#define EGL_NO_SURFACE			((EGLSurface)0)
-
-/* Out-of-band attribute value */
-#define EGL_DONT_CARE			((EGLint)-1)
-
-/* Errors / GetError return values */
-#define EGL_SUCCESS			0x3000
-#define EGL_NOT_INITIALIZED		0x3001
-#define EGL_BAD_ACCESS			0x3002
-#define EGL_BAD_ALLOC			0x3003
-#define EGL_BAD_ATTRIBUTE		0x3004
-#define EGL_BAD_CONFIG			0x3005
-#define EGL_BAD_CONTEXT			0x3006
-#define EGL_BAD_CURRENT_SURFACE		0x3007
-#define EGL_BAD_DISPLAY			0x3008
-#define EGL_BAD_MATCH			0x3009
-#define EGL_BAD_NATIVE_PIXMAP		0x300A
-#define EGL_BAD_NATIVE_WINDOW		0x300B
-#define EGL_BAD_PARAMETER		0x300C
-#define EGL_BAD_SURFACE			0x300D
-#define EGL_CONTEXT_LOST		0x300E	/* EGL 1.1 - IMG_power_management */
-
-/* Reserved 0x300F-0x301F for additional errors */
-
-/* Config attributes */
-#define EGL_BUFFER_SIZE			0x3020
-#define EGL_ALPHA_SIZE			0x3021
-#define EGL_BLUE_SIZE			0x3022
-#define EGL_GREEN_SIZE			0x3023
-#define EGL_RED_SIZE			0x3024
-#define EGL_DEPTH_SIZE			0x3025
-#define EGL_STENCIL_SIZE		0x3026
-#define EGL_CONFIG_CAVEAT		0x3027
-#define EGL_CONFIG_ID			0x3028
-#define EGL_LEVEL			0x3029
-#define EGL_MAX_PBUFFER_HEIGHT		0x302A
-#define EGL_MAX_PBUFFER_PIXELS		0x302B
-#define EGL_MAX_PBUFFER_WIDTH		0x302C
-#define EGL_NATIVE_RENDERABLE		0x302D
-#define EGL_NATIVE_VISUAL_ID		0x302E
-#define EGL_NATIVE_VISUAL_TYPE		0x302F
-#define EGL_SAMPLES			0x3031
-#define EGL_SAMPLE_BUFFERS		0x3032
-#define EGL_SURFACE_TYPE		0x3033
-#define EGL_TRANSPARENT_TYPE		0x3034
-#define EGL_TRANSPARENT_BLUE_VALUE	0x3035
-#define EGL_TRANSPARENT_GREEN_VALUE	0x3036
-#define EGL_TRANSPARENT_RED_VALUE	0x3037
-#define EGL_NONE			0x3038	/* Attrib list terminator */
-#define EGL_BIND_TO_TEXTURE_RGB		0x3039
-#define EGL_BIND_TO_TEXTURE_RGBA	0x303A
-#define EGL_MIN_SWAP_INTERVAL		0x303B
-#define EGL_MAX_SWAP_INTERVAL		0x303C
-#define EGL_LUMINANCE_SIZE		0x303D
-#define EGL_ALPHA_MASK_SIZE		0x303E
-#define EGL_COLOR_BUFFER_TYPE		0x303F
-#define EGL_RENDERABLE_TYPE		0x3040
-#define EGL_MATCH_NATIVE_PIXMAP		0x3041	/* Pseudo-attribute (not queryable) */
-#define EGL_CONFORMANT			0x3042
-
-/* Reserved 0x3041-0x304F for additional config attributes */
-
-/* Config attribute values */
-#define EGL_SLOW_CONFIG			0x3050	/* EGL_CONFIG_CAVEAT value */
-#define EGL_NON_CONFORMANT_CONFIG	0x3051	/* EGL_CONFIG_CAVEAT value */
-#define EGL_TRANSPARENT_RGB		0x3052	/* EGL_TRANSPARENT_TYPE value */
-#define EGL_RGB_BUFFER			0x308E	/* EGL_COLOR_BUFFER_TYPE value */
-#define EGL_LUMINANCE_BUFFER		0x308F	/* EGL_COLOR_BUFFER_TYPE value */
-
-/* More config attribute values, for EGL_TEXTURE_FORMAT */
-#define EGL_NO_TEXTURE			0x305C
-#define EGL_TEXTURE_RGB			0x305D
-#define EGL_TEXTURE_RGBA		0x305E
-#define EGL_TEXTURE_2D			0x305F
-
-/* Config attribute mask bits */
-#define EGL_PBUFFER_BIT			0x0001	/* EGL_SURFACE_TYPE mask bits */
-#define EGL_PIXMAP_BIT			0x0002	/* EGL_SURFACE_TYPE mask bits */
-#define EGL_WINDOW_BIT			0x0004	/* EGL_SURFACE_TYPE mask bits */
-#define EGL_VG_COLORSPACE_LINEAR_BIT	0x0020	/* EGL_SURFACE_TYPE mask bits */
-#define EGL_VG_ALPHA_FORMAT_PRE_BIT	0x0040	/* EGL_SURFACE_TYPE mask bits */
-#define EGL_MULTISAMPLE_RESOLVE_BOX_BIT 0x0200	/* EGL_SURFACE_TYPE mask bits */
-#define EGL_SWAP_BEHAVIOR_PRESERVED_BIT 0x0400	/* EGL_SURFACE_TYPE mask bits */
-
-#define EGL_OPENGL_ES_BIT		0x0001	/* EGL_RENDERABLE_TYPE mask bits */
-#define EGL_OPENVG_BIT			0x0002	/* EGL_RENDERABLE_TYPE mask bits */
-#define EGL_OPENGL_ES2_BIT		0x0004	/* EGL_RENDERABLE_TYPE mask bits */
-#define EGL_OPENGL_BIT			0x0008	/* EGL_RENDERABLE_TYPE mask bits */
-
-/* QueryString targets */
-#define EGL_VENDOR			0x3053
-#define EGL_VERSION			0x3054
-#define EGL_EXTENSIONS			0x3055
-#define EGL_CLIENT_APIS			0x308D
-
-/* QuerySurface / SurfaceAttrib / CreatePbufferSurface targets */
-#define EGL_HEIGHT			0x3056
-#define EGL_WIDTH			0x3057
-#define EGL_LARGEST_PBUFFER		0x3058
-#define EGL_TEXTURE_FORMAT		0x3080
-#define EGL_TEXTURE_TARGET		0x3081
-#define EGL_MIPMAP_TEXTURE		0x3082
-#define EGL_MIPMAP_LEVEL		0x3083
-#define EGL_RENDER_BUFFER		0x3086
-#define EGL_VG_COLORSPACE		0x3087
-#define EGL_VG_ALPHA_FORMAT		0x3088
-#define EGL_HORIZONTAL_RESOLUTION	0x3090
-#define EGL_VERTICAL_RESOLUTION		0x3091
-#define EGL_PIXEL_ASPECT_RATIO		0x3092
-#define EGL_SWAP_BEHAVIOR		0x3093
-#define EGL_MULTISAMPLE_RESOLVE		0x3099
-
-/* EGL_RENDER_BUFFER values / BindTexImage / ReleaseTexImage buffer targets */
-#define EGL_BACK_BUFFER			0x3084
-#define EGL_SINGLE_BUFFER		0x3085
-
-/* OpenVG color spaces */
-#define EGL_VG_COLORSPACE_sRGB		0x3089	/* EGL_VG_COLORSPACE value */
-#define EGL_VG_COLORSPACE_LINEAR	0x308A	/* EGL_VG_COLORSPACE value */
-
-/* OpenVG alpha formats */
-#define EGL_VG_ALPHA_FORMAT_NONPRE	0x308B	/* EGL_ALPHA_FORMAT value */
-#define EGL_VG_ALPHA_FORMAT_PRE		0x308C	/* EGL_ALPHA_FORMAT value */
-
-/* Constant scale factor by which fractional display resolutions &
- * aspect ratio are scaled when queried as integer values.
- */
-#define EGL_DISPLAY_SCALING		10000
-
-/* Unknown display resolution/aspect ratio */
-#define EGL_UNKNOWN			((EGLint)-1)
-
-/* Back buffer swap behaviors */
-#define EGL_BUFFER_PRESERVED		0x3094	/* EGL_SWAP_BEHAVIOR value */
-#define EGL_BUFFER_DESTROYED		0x3095	/* EGL_SWAP_BEHAVIOR value */
-
-/* CreatePbufferFromClientBuffer buffer types */
-#define EGL_OPENVG_IMAGE		0x3096
-
-/* QueryContext targets */
-#define EGL_CONTEXT_CLIENT_TYPE		0x3097
-
-/* CreateContext attributes */
-#define EGL_CONTEXT_CLIENT_VERSION	0x3098
-
-/* Multisample resolution behaviors */
-#define EGL_MULTISAMPLE_RESOLVE_DEFAULT 0x309A	/* EGL_MULTISAMPLE_RESOLVE value */
-#define EGL_MULTISAMPLE_RESOLVE_BOX	0x309B	/* EGL_MULTISAMPLE_RESOLVE value */
-
-/* BindAPI/QueryAPI targets */
-#define EGL_OPENGL_ES_API		0x30A0
-#define EGL_OPENVG_API			0x30A1
-#define EGL_OPENGL_API			0x30A2
-
-/* GetCurrentSurface targets */
-#define EGL_DRAW			0x3059
-#define EGL_READ			0x305A
-
-/* WaitNative engines */
-#define EGL_CORE_NATIVE_ENGINE		0x305B
-
-/* EGL 1.2 tokens renamed for consistency in EGL 1.3 */
-#define EGL_COLORSPACE			EGL_VG_COLORSPACE
-#define EGL_ALPHA_FORMAT		EGL_VG_ALPHA_FORMAT
-#define EGL_COLORSPACE_sRGB		EGL_VG_COLORSPACE_sRGB
-#define EGL_COLORSPACE_LINEAR		EGL_VG_COLORSPACE_LINEAR
-#define EGL_ALPHA_FORMAT_NONPRE		EGL_VG_ALPHA_FORMAT_NONPRE
-#define EGL_ALPHA_FORMAT_PRE		EGL_VG_ALPHA_FORMAT_PRE
-
-/* EGL extensions must request enum blocks from the Khronos
- * API Registrar, who maintains the enumerant registry. Submit
- * a bug in Khronos Bugzilla against task "Registry".
- */
-
-
-
-/* EGL Functions */
-
-EGLAPI EGLint EGLAPIENTRY eglGetError(void);
-
-EGLAPI EGLDisplay EGLAPIENTRY eglGetDisplay(EGLNativeDisplayType display_id);
-EGLAPI EGLBoolean EGLAPIENTRY eglInitialize(EGLDisplay dpy, EGLint *major, EGLint *minor);
-EGLAPI EGLBoolean EGLAPIENTRY eglTerminate(EGLDisplay dpy);
-
-EGLAPI const char * EGLAPIENTRY eglQueryString(EGLDisplay dpy, EGLint name);
-
-EGLAPI EGLBoolean EGLAPIENTRY eglGetConfigs(EGLDisplay dpy, EGLConfig *configs,
-			 EGLint config_size, EGLint *num_config);
-EGLAPI EGLBoolean EGLAPIENTRY eglChooseConfig(EGLDisplay dpy, const EGLint *attrib_list,
-			   EGLConfig *configs, EGLint config_size,
-			   EGLint *num_config);
-EGLAPI EGLBoolean EGLAPIENTRY eglGetConfigAttrib(EGLDisplay dpy, EGLConfig config,
-			      EGLint attribute, EGLint *value);
-
-EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
-				  EGLNativeWindowType win,
-				  const EGLint *attrib_list);
-EGLAPI EGLSurface EGLAPIENTRY eglCreatePbufferSurface(EGLDisplay dpy, EGLConfig config,
-				   const EGLint *attrib_list);
-EGLAPI EGLSurface EGLAPIENTRY eglCreatePixmapSurface(EGLDisplay dpy, EGLConfig config,
-				  EGLNativePixmapType pixmap,
-				  const EGLint *attrib_list);
-EGLAPI EGLBoolean EGLAPIENTRY eglDestroySurface(EGLDisplay dpy, EGLSurface surface);
-EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurface(EGLDisplay dpy, EGLSurface surface,
-			   EGLint attribute, EGLint *value);
-
-EGLAPI EGLBoolean EGLAPIENTRY eglBindAPI(EGLenum api);
-EGLAPI EGLenum EGLAPIENTRY eglQueryAPI(void);
-
-EGLAPI EGLBoolean EGLAPIENTRY eglWaitClient(void);
-
-EGLAPI EGLBoolean EGLAPIENTRY eglReleaseThread(void);
-
-EGLAPI EGLSurface EGLAPIENTRY eglCreatePbufferFromClientBuffer(
-	      EGLDisplay dpy, EGLenum buftype, EGLClientBuffer buffer,
-	      EGLConfig config, const EGLint *attrib_list);
-
-EGLAPI EGLBoolean EGLAPIENTRY eglSurfaceAttrib(EGLDisplay dpy, EGLSurface surface,
-			    EGLint attribute, EGLint value);
-EGLAPI EGLBoolean EGLAPIENTRY eglBindTexImage(EGLDisplay dpy, EGLSurface surface, EGLint buffer);
-EGLAPI EGLBoolean EGLAPIENTRY eglReleaseTexImage(EGLDisplay dpy, EGLSurface surface, EGLint buffer);
-
-
-EGLAPI EGLBoolean EGLAPIENTRY eglSwapInterval(EGLDisplay dpy, EGLint interval);
-
-
-EGLAPI EGLContext EGLAPIENTRY eglCreateContext(EGLDisplay dpy, EGLConfig config,
-			    EGLContext share_context,
-			    const EGLint *attrib_list);
-EGLAPI EGLBoolean EGLAPIENTRY eglDestroyContext(EGLDisplay dpy, EGLContext ctx);
-EGLAPI EGLBoolean EGLAPIENTRY eglMakeCurrent(EGLDisplay dpy, EGLSurface draw,
-			  EGLSurface read, EGLContext ctx);
-
-EGLAPI EGLContext EGLAPIENTRY eglGetCurrentContext(void);
-EGLAPI EGLSurface EGLAPIENTRY eglGetCurrentSurface(EGLint readdraw);
-EGLAPI EGLDisplay EGLAPIENTRY eglGetCurrentDisplay(void);
-EGLAPI EGLBoolean EGLAPIENTRY eglQueryContext(EGLDisplay dpy, EGLContext ctx,
-			   EGLint attribute, EGLint *value);
-
-EGLAPI EGLBoolean EGLAPIENTRY eglWaitGL(void);
-EGLAPI EGLBoolean EGLAPIENTRY eglWaitNative(EGLint engine);
-EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers(EGLDisplay dpy, EGLSurface surface);
-EGLAPI EGLBoolean EGLAPIENTRY eglCopyBuffers(EGLDisplay dpy, EGLSurface surface,
-			  EGLNativePixmapType target);
-
-/* This is a generic function pointer type, whose name indicates it must
- * be cast to the proper type *and calling convention* before use.
- */
+typedef void *EGLContext;
 typedef void (*__eglMustCastToProperFunctionPointerType)(void);
-
-/* Now, define eglGetProcAddress using the generic function ptr. type */
-EGLAPI __eglMustCastToProperFunctionPointerType EGLAPIENTRY
-       eglGetProcAddress(const char *procname);
+#define EGL_ALPHA_SIZE                    0x3021
+#define EGL_BAD_ACCESS                    0x3002
+#define EGL_BAD_ALLOC                     0x3003
+#define EGL_BAD_ATTRIBUTE                 0x3004
+#define EGL_BAD_CONFIG                    0x3005
+#define EGL_BAD_CONTEXT                   0x3006
+#define EGL_BAD_CURRENT_SURFACE           0x3007
+#define EGL_BAD_DISPLAY                   0x3008
+#define EGL_BAD_MATCH                     0x3009
+#define EGL_BAD_NATIVE_PIXMAP             0x300A
+#define EGL_BAD_NATIVE_WINDOW             0x300B
+#define EGL_BAD_PARAMETER                 0x300C
+#define EGL_BAD_SURFACE                   0x300D
+#define EGL_BLUE_SIZE                     0x3022
+#define EGL_BUFFER_SIZE                   0x3020
+#define EGL_CONFIG_CAVEAT                 0x3027
+#define EGL_CONFIG_ID                     0x3028
+#define EGL_CORE_NATIVE_ENGINE            0x305B
+#define EGL_DEPTH_SIZE                    0x3025
+#define EGL_DONT_CARE                     ((EGLint)-1)
+#define EGL_DRAW                          0x3059
+#define EGL_EXTENSIONS                    0x3055
+#define EGL_FALSE                         0
+#define EGL_GREEN_SIZE                    0x3023
+#define EGL_HEIGHT                        0x3056
+#define EGL_LARGEST_PBUFFER               0x3058
+#define EGL_LEVEL                         0x3029
+#define EGL_MAX_PBUFFER_HEIGHT            0x302A
+#define EGL_MAX_PBUFFER_PIXELS            0x302B
+#define EGL_MAX_PBUFFER_WIDTH             0x302C
+#define EGL_NATIVE_RENDERABLE             0x302D
+#define EGL_NATIVE_VISUAL_ID              0x302E
+#define EGL_NATIVE_VISUAL_TYPE            0x302F
+#define EGL_NONE                          0x3038
+#define EGL_NON_CONFORMANT_CONFIG         0x3051
+#define EGL_NOT_INITIALIZED               0x3001
+#define EGL_NO_CONTEXT                    ((EGLContext)0)
+#define EGL_NO_DISPLAY                    ((EGLDisplay)0)
+#define EGL_NO_SURFACE                    ((EGLSurface)0)
+#define EGL_PBUFFER_BIT                   0x0001
+#define EGL_PIXMAP_BIT                    0x0002
+#define EGL_READ                          0x305A
+#define EGL_RED_SIZE                      0x3024
+#define EGL_SAMPLES                       0x3031
+#define EGL_SAMPLE_BUFFERS                0x3032
+#define EGL_SLOW_CONFIG                   0x3050
+#define EGL_STENCIL_SIZE                  0x3026
+#define EGL_SUCCESS                       0x3000
+#define EGL_SURFACE_TYPE                  0x3033
+#define EGL_TRANSPARENT_BLUE_VALUE        0x3035
+#define EGL_TRANSPARENT_GREEN_VALUE       0x3036
+#define EGL_TRANSPARENT_RED_VALUE         0x3037
+#define EGL_TRANSPARENT_RGB               0x3052
+#define EGL_TRANSPARENT_TYPE              0x3034
+#define EGL_TRUE                          1
+#define EGL_VENDOR                        0x3053
+#define EGL_VERSION                       0x3054
+#define EGL_WIDTH                         0x3057
+#define EGL_WINDOW_BIT                    0x0004
+EGLAPI EGLBoolean EGLAPIENTRY eglChooseConfig (EGLDisplay dpy, const EGLint *attrib_list, EGLConfig *configs, EGLint config_size, EGLint *num_config);
+EGLAPI EGLBoolean EGLAPIENTRY eglCopyBuffers (EGLDisplay dpy, EGLSurface surface, EGLNativePixmapType target);
+EGLAPI EGLContext EGLAPIENTRY eglCreateContext (EGLDisplay dpy, EGLConfig config, EGLContext share_context, const EGLint *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePbufferSurface (EGLDisplay dpy, EGLConfig config, const EGLint *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePixmapSurface (EGLDisplay dpy, EGLConfig config, EGLNativePixmapType pixmap, const EGLint *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface (EGLDisplay dpy, EGLConfig config, EGLNativeWindowType win, const EGLint *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglDestroyContext (EGLDisplay dpy, EGLContext ctx);
+EGLAPI EGLBoolean EGLAPIENTRY eglDestroySurface (EGLDisplay dpy, EGLSurface surface);
+EGLAPI EGLBoolean EGLAPIENTRY eglGetConfigAttrib (EGLDisplay dpy, EGLConfig config, EGLint attribute, EGLint *value);
+EGLAPI EGLBoolean EGLAPIENTRY eglGetConfigs (EGLDisplay dpy, EGLConfig *configs, EGLint config_size, EGLint *num_config);
+EGLAPI EGLDisplay EGLAPIENTRY eglGetCurrentDisplay (void);
+EGLAPI EGLSurface EGLAPIENTRY eglGetCurrentSurface (EGLint readdraw);
+EGLAPI EGLDisplay EGLAPIENTRY eglGetDisplay (EGLNativeDisplayType display_id);
+EGLAPI EGLint EGLAPIENTRY eglGetError (void);
+EGLAPI __eglMustCastToProperFunctionPointerType EGLAPIENTRY eglGetProcAddress (const char *procname);
+EGLAPI EGLBoolean EGLAPIENTRY eglInitialize (EGLDisplay dpy, EGLint *major, EGLint *minor);
+EGLAPI EGLBoolean EGLAPIENTRY eglMakeCurrent (EGLDisplay dpy, EGLSurface draw, EGLSurface read, EGLContext ctx);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryContext (EGLDisplay dpy, EGLContext ctx, EGLint attribute, EGLint *value);
+EGLAPI const char *EGLAPIENTRY eglQueryString (EGLDisplay dpy, EGLint name);
+EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurface (EGLDisplay dpy, EGLSurface surface, EGLint attribute, EGLint *value);
+EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers (EGLDisplay dpy, EGLSurface surface);
+EGLAPI EGLBoolean EGLAPIENTRY eglTerminate (EGLDisplay dpy);
+EGLAPI EGLBoolean EGLAPIENTRY eglWaitGL (void);
+EGLAPI EGLBoolean EGLAPIENTRY eglWaitNative (EGLint engine);
+#endif /* EGL_VERSION_1_0 */
+
+#ifndef EGL_VERSION_1_1
+#define EGL_VERSION_1_1 1
+#define EGL_BACK_BUFFER                   0x3084
+#define EGL_BIND_TO_TEXTURE_RGB           0x3039
+#define EGL_BIND_TO_TEXTURE_RGBA          0x303A
+#define EGL_CONTEXT_LOST                  0x300E
+#define EGL_MIN_SWAP_INTERVAL             0x303B
+#define EGL_MAX_SWAP_INTERVAL             0x303C
+#define EGL_MIPMAP_TEXTURE                0x3082
+#define EGL_MIPMAP_LEVEL                  0x3083
+#define EGL_NO_TEXTURE                    0x305C
+#define EGL_TEXTURE_2D                    0x305F
+#define EGL_TEXTURE_FORMAT                0x3080
+#define EGL_TEXTURE_RGB                   0x305D
+#define EGL_TEXTURE_RGBA                  0x305E
+#define EGL_TEXTURE_TARGET                0x3081
+EGLAPI EGLBoolean EGLAPIENTRY eglBindTexImage (EGLDisplay dpy, EGLSurface surface, EGLint buffer);
+EGLAPI EGLBoolean EGLAPIENTRY eglReleaseTexImage (EGLDisplay dpy, EGLSurface surface, EGLint buffer);
+EGLAPI EGLBoolean EGLAPIENTRY eglSurfaceAttrib (EGLDisplay dpy, EGLSurface surface, EGLint attribute, EGLint value);
+EGLAPI EGLBoolean EGLAPIENTRY eglSwapInterval (EGLDisplay dpy, EGLint interval);
+#endif /* EGL_VERSION_1_1 */
+
+#ifndef EGL_VERSION_1_2
+#define EGL_VERSION_1_2 1
+typedef unsigned int EGLenum;
+typedef void *EGLClientBuffer;
+#define EGL_ALPHA_FORMAT                  0x3088
+#define EGL_ALPHA_FORMAT_NONPRE           0x308B
+#define EGL_ALPHA_FORMAT_PRE              0x308C
+#define EGL_ALPHA_MASK_SIZE               0x303E
+#define EGL_BUFFER_PRESERVED              0x3094
+#define EGL_BUFFER_DESTROYED              0x3095
+#define EGL_CLIENT_APIS                   0x308D
+#define EGL_COLORSPACE                    0x3087
+#define EGL_COLORSPACE_sRGB               0x3089
+#define EGL_COLORSPACE_LINEAR             0x308A
+#define EGL_COLOR_BUFFER_TYPE             0x303F
+#define EGL_CONTEXT_CLIENT_TYPE           0x3097
+#define EGL_DISPLAY_SCALING               10000
+#define EGL_HORIZONTAL_RESOLUTION         0x3090
+#define EGL_LUMINANCE_BUFFER              0x308F
+#define EGL_LUMINANCE_SIZE                0x303D
+#define EGL_OPENGL_ES_BIT                 0x0001
+#define EGL_OPENVG_BIT                    0x0002
+#define EGL_OPENGL_ES_API                 0x30A0
+#define EGL_OPENVG_API                    0x30A1
+#define EGL_OPENVG_IMAGE                  0x3096
+#define EGL_PIXEL_ASPECT_RATIO            0x3092
+#define EGL_RENDERABLE_TYPE               0x3040
+#define EGL_RENDER_BUFFER                 0x3086
+#define EGL_RGB_BUFFER                    0x308E
+#define EGL_SINGLE_BUFFER                 0x3085
+#define EGL_SWAP_BEHAVIOR                 0x3093
+#define EGL_UNKNOWN                       ((EGLint)-1)
+#define EGL_VERTICAL_RESOLUTION           0x3091
+EGLAPI EGLBoolean EGLAPIENTRY eglBindAPI (EGLenum api);
+EGLAPI EGLenum EGLAPIENTRY eglQueryAPI (void);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePbufferFromClientBuffer (EGLDisplay dpy, EGLenum buftype, EGLClientBuffer buffer, EGLConfig config, const EGLint *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglReleaseThread (void);
+EGLAPI EGLBoolean EGLAPIENTRY eglWaitClient (void);
+#endif /* EGL_VERSION_1_2 */
+
+#ifndef EGL_VERSION_1_3
+#define EGL_VERSION_1_3 1
+#define EGL_CONFORMANT                    0x3042
+#define EGL_CONTEXT_CLIENT_VERSION        0x3098
+#define EGL_MATCH_NATIVE_PIXMAP           0x3041
+#define EGL_OPENGL_ES2_BIT                0x0004
+#define EGL_VG_ALPHA_FORMAT               0x3088
+#define EGL_VG_ALPHA_FORMAT_NONPRE        0x308B
+#define EGL_VG_ALPHA_FORMAT_PRE           0x308C
+#define EGL_VG_ALPHA_FORMAT_PRE_BIT       0x0040
+#define EGL_VG_COLORSPACE                 0x3087
+#define EGL_VG_COLORSPACE_sRGB            0x3089
+#define EGL_VG_COLORSPACE_LINEAR          0x308A
+#define EGL_VG_COLORSPACE_LINEAR_BIT      0x0020
+#endif /* EGL_VERSION_1_3 */
+
+#ifndef EGL_VERSION_1_4
+#define EGL_VERSION_1_4 1
+#define EGL_DEFAULT_DISPLAY               ((EGLNativeDisplayType)0)
+#define EGL_MULTISAMPLE_RESOLVE_BOX_BIT   0x0200
+#define EGL_MULTISAMPLE_RESOLVE           0x3099
+#define EGL_MULTISAMPLE_RESOLVE_DEFAULT   0x309A
+#define EGL_MULTISAMPLE_RESOLVE_BOX       0x309B
+#define EGL_OPENGL_API                    0x30A2
+#define EGL_OPENGL_BIT                    0x0008
+#define EGL_SWAP_BEHAVIOR_PRESERVED_BIT   0x0400
+EGLAPI EGLContext EGLAPIENTRY eglGetCurrentContext (void);
+#endif /* EGL_VERSION_1_4 */
+
+#ifndef EGL_VERSION_1_5
+#define EGL_VERSION_1_5 1
+typedef void *EGLSync;
+typedef khronos_intptr_t EGLAttrib;
+typedef khronos_utime_nanoseconds_t EGLTime;
+#define EGL_CONTEXT_MAJOR_VERSION         0x3098
+#define EGL_CONTEXT_MINOR_VERSION         0x30FB
+#define EGL_CONTEXT_OPENGL_PROFILE_MASK   0x30FD
+#define EGL_CONTEXT_OPENGL_RESET_NOTIFICATION_STRATEGY 0x31BD
+#define EGL_NO_RESET_NOTIFICATION         0x31BE
+#define EGL_LOSE_CONTEXT_ON_RESET         0x31BF
+#define EGL_CONTEXT_OPENGL_CORE_PROFILE_BIT 0x00000001
+#define EGL_CONTEXT_OPENGL_COMPATIBILITY_PROFILE_BIT 0x00000002
+#define EGL_CONTEXT_OPENGL_DEBUG          0x31B0
+#define EGL_CONTEXT_OPENGL_FORWARD_COMPATIBLE 0x31B1
+#define EGL_CONTEXT_OPENGL_ROBUST_ACCESS  0x31B2
+#define EGL_OPENGL_ES3_BIT                0x00000040
+#define EGL_CL_EVENT_HANDLE               0x309C
+#define EGL_SYNC_CL_EVENT                 0x30FE
+#define EGL_SYNC_CL_EVENT_COMPLETE        0x30FF
+#define EGL_SYNC_PRIOR_COMMANDS_COMPLETE  0x30F0
+#define EGL_SYNC_TYPE                     0x30F7
+#define EGL_SYNC_STATUS                   0x30F1
+#define EGL_SYNC_CONDITION                0x30F8
+#define EGL_SIGNALED                      0x30F2
+#define EGL_UNSIGNALED                    0x30F3
+#define EGL_SYNC_FLUSH_COMMANDS_BIT       0x0001
+#define EGL_FOREVER                       0xFFFFFFFFFFFFFFFFull
+#define EGL_TIMEOUT_EXPIRED               0x30F5
+#define EGL_CONDITION_SATISFIED           0x30F6
+#define EGL_NO_SYNC                       ((EGLSync)0)
+#define EGL_SYNC_FENCE                    0x30F9
+#define EGL_GL_COLORSPACE                 0x309D
+#define EGL_GL_COLORSPACE_SRGB            0x3089
+#define EGL_GL_COLORSPACE_LINEAR          0x308A
+#define EGL_GL_RENDERBUFFER               0x30B9
+#define EGL_GL_TEXTURE_2D                 0x30B1
+#define EGL_GL_TEXTURE_LEVEL              0x30BC
+#define EGL_GL_TEXTURE_3D                 0x30B2
+#define EGL_GL_TEXTURE_ZOFFSET            0x30BD
+#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_X 0x30B3
+#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_X 0x30B4
+#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Y 0x30B5
+#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Y 0x30B6
+#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Z 0x30B7
+#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Z 0x30B8
+EGLAPI EGLSync EGLAPIENTRY eglCreateSync (EGLDisplay dpy, EGLenum type, const EGLAttrib *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglDestroySync (EGLDisplay dpy, EGLSync sync);
+EGLAPI EGLint EGLAPIENTRY eglClientWaitSync (EGLDisplay dpy, EGLSync sync, EGLint flags, EGLTime timeout);
+EGLAPI EGLBoolean EGLAPIENTRY eglGetSyncAttrib (EGLDisplay dpy, EGLSync sync, EGLint attribute, EGLAttrib *value);
+EGLAPI EGLDisplay EGLAPIENTRY eglGetPlatformDisplay (EGLenum platform, void *native_display, const EGLAttrib *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePlatformWindowSurface (EGLDisplay dpy, EGLConfig config, void *native_window, const EGLAttrib *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePlatformPixmapSurface (EGLDisplay dpy, EGLConfig config, void *native_pixmap, const EGLAttrib *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglWaitSync (EGLDisplay dpy, EGLSync sync, EGLint flags);
+#endif /* EGL_VERSION_1_5 */
 
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* __egl_h_ */
+#endif
diff --git a/src/3rdparty/angle/include/EGL/eglext.h b/src/3rdparty/angle/include/EGL/eglext.h
index c06d4c0850..989359b026 100644
--- a/src/3rdparty/angle/include/EGL/eglext.h
+++ b/src/3rdparty/angle/include/EGL/eglext.h
@@ -1,12 +1,12 @@
 #ifndef __eglext_h_
-#define __eglext_h_
+#define __eglext_h_ 1
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 /*
-** Copyright (c) 2007-2012 The Khronos Group Inc.
+** Copyright (c) 2013-2014 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -27,325 +27,729 @@ extern "C" {
 ** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 ** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
 */
+/*
+** This header is generated from the Khronos OpenGL / OpenGL ES XML
+** API Registry. The current version of the Registry, generator scripts
+** used to make the header, and the header can be found at
+**   http://www.opengl.org/registry/
+**
+** Khronos $Revision: 27018 $ on $Date: 2014-06-10 08:06:12 -0700 (Tue, 10 Jun 2014) $
+*/
 
 #include <EGL/eglplatform.h>
 
-/*************************************************************/
+#define EGL_EGLEXT_VERSION 20140610
 
-/* Header file version number */
-/* Current version at http://www.khronos.org/registry/egl/ */
-/* $Revision: 16473 $ on $Date: 2012-01-04 02:20:48 -0800 (Wed, 04 Jan 2012) $ */
-#define EGL_EGLEXT_VERSION 11
+/* Generated C header for:
+ * API: egl
+ * Versions considered: .*
+ * Versions emitted: _nomatch_^
+ * Default extensions included: egl
+ * Additional extensions included: _nomatch_^
+ * Extensions removed: _nomatch_^
+ */
+
+#ifndef EGL_KHR_cl_event
+#define EGL_KHR_cl_event 1
+#define EGL_CL_EVENT_HANDLE_KHR           0x309C
+#define EGL_SYNC_CL_EVENT_KHR             0x30FE
+#define EGL_SYNC_CL_EVENT_COMPLETE_KHR    0x30FF
+#endif /* EGL_KHR_cl_event */
+
+#ifndef EGL_KHR_cl_event2
+#define EGL_KHR_cl_event2 1
+typedef void *EGLSyncKHR;
+typedef khronos_intptr_t EGLAttribKHR;
+typedef EGLSyncKHR (EGLAPIENTRYP PFNEGLCREATESYNC64KHRPROC) (EGLDisplay dpy, EGLenum type, const EGLAttribKHR *attrib_list);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLSyncKHR EGLAPIENTRY eglCreateSync64KHR (EGLDisplay dpy, EGLenum type, const EGLAttribKHR *attrib_list);
+#endif
+#endif /* EGL_KHR_cl_event2 */
+
+#ifndef EGL_KHR_client_get_all_proc_addresses
+#define EGL_KHR_client_get_all_proc_addresses 1
+#endif /* EGL_KHR_client_get_all_proc_addresses */
 
 #ifndef EGL_KHR_config_attribs
 #define EGL_KHR_config_attribs 1
-#define EGL_CONFORMANT_KHR			0x3042	/* EGLConfig attribute */
-#define EGL_VG_COLORSPACE_LINEAR_BIT_KHR	0x0020	/* EGL_SURFACE_TYPE bitfield */
-#define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR		0x0040	/* EGL_SURFACE_TYPE bitfield */
-#endif
+#define EGL_CONFORMANT_KHR                0x3042
+#define EGL_VG_COLORSPACE_LINEAR_BIT_KHR  0x0020
+#define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR   0x0040
+#endif /* EGL_KHR_config_attribs */
+
+#ifndef EGL_KHR_create_context
+#define EGL_KHR_create_context 1
+#define EGL_CONTEXT_MAJOR_VERSION_KHR     0x3098
+#define EGL_CONTEXT_MINOR_VERSION_KHR     0x30FB
+#define EGL_CONTEXT_FLAGS_KHR             0x30FC
+#define EGL_CONTEXT_OPENGL_PROFILE_MASK_KHR 0x30FD
+#define EGL_CONTEXT_OPENGL_RESET_NOTIFICATION_STRATEGY_KHR 0x31BD
+#define EGL_NO_RESET_NOTIFICATION_KHR     0x31BE
+#define EGL_LOSE_CONTEXT_ON_RESET_KHR     0x31BF
+#define EGL_CONTEXT_OPENGL_DEBUG_BIT_KHR  0x00000001
+#define EGL_CONTEXT_OPENGL_FORWARD_COMPATIBLE_BIT_KHR 0x00000002
+#define EGL_CONTEXT_OPENGL_ROBUST_ACCESS_BIT_KHR 0x00000004
+#define EGL_CONTEXT_OPENGL_CORE_PROFILE_BIT_KHR 0x00000001
+#define EGL_CONTEXT_OPENGL_COMPATIBILITY_PROFILE_BIT_KHR 0x00000002
+#define EGL_OPENGL_ES3_BIT_KHR            0x00000040
+#endif /* EGL_KHR_create_context */
 
-#ifndef EGL_KHR_lock_surface
-#define EGL_KHR_lock_surface 1
-#define EGL_READ_SURFACE_BIT_KHR		0x0001	/* EGL_LOCK_USAGE_HINT_KHR bitfield */
-#define EGL_WRITE_SURFACE_BIT_KHR		0x0002	/* EGL_LOCK_USAGE_HINT_KHR bitfield */
-#define EGL_LOCK_SURFACE_BIT_KHR		0x0080	/* EGL_SURFACE_TYPE bitfield */
-#define EGL_OPTIMAL_FORMAT_BIT_KHR		0x0100	/* EGL_SURFACE_TYPE bitfield */
-#define EGL_MATCH_FORMAT_KHR			0x3043	/* EGLConfig attribute */
-#define EGL_FORMAT_RGB_565_EXACT_KHR		0x30C0	/* EGL_MATCH_FORMAT_KHR value */
-#define EGL_FORMAT_RGB_565_KHR			0x30C1	/* EGL_MATCH_FORMAT_KHR value */
-#define EGL_FORMAT_RGBA_8888_EXACT_KHR		0x30C2	/* EGL_MATCH_FORMAT_KHR value */
-#define EGL_FORMAT_RGBA_8888_KHR		0x30C3	/* EGL_MATCH_FORMAT_KHR value */
-#define EGL_MAP_PRESERVE_PIXELS_KHR		0x30C4	/* eglLockSurfaceKHR attribute */
-#define EGL_LOCK_USAGE_HINT_KHR			0x30C5	/* eglLockSurfaceKHR attribute */
-#define EGL_BITMAP_POINTER_KHR			0x30C6	/* eglQuerySurface attribute */
-#define EGL_BITMAP_PITCH_KHR			0x30C7	/* eglQuerySurface attribute */
-#define EGL_BITMAP_ORIGIN_KHR			0x30C8	/* eglQuerySurface attribute */
-#define EGL_BITMAP_PIXEL_RED_OFFSET_KHR		0x30C9	/* eglQuerySurface attribute */
-#define EGL_BITMAP_PIXEL_GREEN_OFFSET_KHR	0x30CA	/* eglQuerySurface attribute */
-#define EGL_BITMAP_PIXEL_BLUE_OFFSET_KHR	0x30CB	/* eglQuerySurface attribute */
-#define EGL_BITMAP_PIXEL_ALPHA_OFFSET_KHR	0x30CC	/* eglQuerySurface attribute */
-#define EGL_BITMAP_PIXEL_LUMINANCE_OFFSET_KHR	0x30CD	/* eglQuerySurface attribute */
-#define EGL_LOWER_LEFT_KHR			0x30CE	/* EGL_BITMAP_ORIGIN_KHR value */
-#define EGL_UPPER_LEFT_KHR			0x30CF	/* EGL_BITMAP_ORIGIN_KHR value */
-#ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLBoolean EGLAPIENTRY eglLockSurfaceKHR (EGLDisplay display, EGLSurface surface, const EGLint *attrib_list);
-EGLAPI EGLBoolean EGLAPIENTRY eglUnlockSurfaceKHR (EGLDisplay display, EGLSurface surface);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLLOCKSURFACEKHRPROC) (EGLDisplay display, EGLSurface surface, const EGLint *attrib_list);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLUNLOCKSURFACEKHRPROC) (EGLDisplay display, EGLSurface surface);
-#endif
+#ifndef EGL_KHR_fence_sync
+#define EGL_KHR_fence_sync 1
+#ifdef KHRONOS_SUPPORT_INT64
+#define EGL_SYNC_PRIOR_COMMANDS_COMPLETE_KHR 0x30F0
+#define EGL_SYNC_CONDITION_KHR            0x30F8
+#define EGL_SYNC_FENCE_KHR                0x30F9
+#endif /* KHRONOS_SUPPORT_INT64 */
+#endif /* EGL_KHR_fence_sync */
+
+#ifndef EGL_KHR_get_all_proc_addresses
+#define EGL_KHR_get_all_proc_addresses 1
+#endif /* EGL_KHR_get_all_proc_addresses */
+
+#ifndef EGL_KHR_gl_colorspace
+#define EGL_KHR_gl_colorspace 1
+#define EGL_GL_COLORSPACE_KHR             0x309D
+#define EGL_GL_COLORSPACE_SRGB_KHR        0x3089
+#define EGL_GL_COLORSPACE_LINEAR_KHR      0x308A
+#endif /* EGL_KHR_gl_colorspace */
+
+#ifndef EGL_KHR_gl_renderbuffer_image
+#define EGL_KHR_gl_renderbuffer_image 1
+#define EGL_GL_RENDERBUFFER_KHR           0x30B9
+#endif /* EGL_KHR_gl_renderbuffer_image */
+
+#ifndef EGL_KHR_gl_texture_2D_image
+#define EGL_KHR_gl_texture_2D_image 1
+#define EGL_GL_TEXTURE_2D_KHR             0x30B1
+#define EGL_GL_TEXTURE_LEVEL_KHR          0x30BC
+#endif /* EGL_KHR_gl_texture_2D_image */
+
+#ifndef EGL_KHR_gl_texture_3D_image
+#define EGL_KHR_gl_texture_3D_image 1
+#define EGL_GL_TEXTURE_3D_KHR             0x30B2
+#define EGL_GL_TEXTURE_ZOFFSET_KHR        0x30BD
+#endif /* EGL_KHR_gl_texture_3D_image */
+
+#ifndef EGL_KHR_gl_texture_cubemap_image
+#define EGL_KHR_gl_texture_cubemap_image 1
+#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_X_KHR 0x30B3
+#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_X_KHR 0x30B4
+#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Y_KHR 0x30B5
+#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_KHR 0x30B6
+#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Z_KHR 0x30B7
+#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_KHR 0x30B8
+#endif /* EGL_KHR_gl_texture_cubemap_image */
 
 #ifndef EGL_KHR_image
 #define EGL_KHR_image 1
-#define EGL_NATIVE_PIXMAP_KHR			0x30B0	/* eglCreateImageKHR target */
 typedef void *EGLImageKHR;
-#define EGL_NO_IMAGE_KHR			((EGLImageKHR)0)
+#define EGL_NATIVE_PIXMAP_KHR             0x30B0
+#define EGL_NO_IMAGE_KHR                  ((EGLImageKHR)0)
+typedef EGLImageKHR (EGLAPIENTRYP PFNEGLCREATEIMAGEKHRPROC) (EGLDisplay dpy, EGLContext ctx, EGLenum target, EGLClientBuffer buffer, const EGLint *attrib_list);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYIMAGEKHRPROC) (EGLDisplay dpy, EGLImageKHR image);
 #ifdef EGL_EGLEXT_PROTOTYPES
 EGLAPI EGLImageKHR EGLAPIENTRY eglCreateImageKHR (EGLDisplay dpy, EGLContext ctx, EGLenum target, EGLClientBuffer buffer, const EGLint *attrib_list);
 EGLAPI EGLBoolean EGLAPIENTRY eglDestroyImageKHR (EGLDisplay dpy, EGLImageKHR image);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLImageKHR (EGLAPIENTRYP PFNEGLCREATEIMAGEKHRPROC) (EGLDisplay dpy, EGLContext ctx, EGLenum target, EGLClientBuffer buffer, const EGLint *attrib_list);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYIMAGEKHRPROC) (EGLDisplay dpy, EGLImageKHR image);
 #endif
+#endif /* EGL_KHR_image */
 
-#ifndef EGL_KHR_vg_parent_image
-#define EGL_KHR_vg_parent_image 1
-#define EGL_VG_PARENT_IMAGE_KHR			0x30BA	/* eglCreateImageKHR target */
-#endif
+#ifndef EGL_KHR_image_base
+#define EGL_KHR_image_base 1
+#define EGL_IMAGE_PRESERVED_KHR           0x30D2
+#endif /* EGL_KHR_image_base */
 
-#ifndef EGL_KHR_gl_texture_2D_image
-#define EGL_KHR_gl_texture_2D_image 1
-#define EGL_GL_TEXTURE_2D_KHR			0x30B1	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_LEVEL_KHR		0x30BC	/* eglCreateImageKHR attribute */
-#endif
+#ifndef EGL_KHR_image_pixmap
+#define EGL_KHR_image_pixmap 1
+#endif /* EGL_KHR_image_pixmap */
 
-#ifndef EGL_KHR_gl_texture_cubemap_image
-#define EGL_KHR_gl_texture_cubemap_image 1
-#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_X_KHR	0x30B3	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_X_KHR	0x30B4	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Y_KHR	0x30B5	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_KHR	0x30B6	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Z_KHR	0x30B7	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_KHR	0x30B8	/* eglCreateImageKHR target */
+#ifndef EGL_KHR_lock_surface
+#define EGL_KHR_lock_surface 1
+#define EGL_READ_SURFACE_BIT_KHR          0x0001
+#define EGL_WRITE_SURFACE_BIT_KHR         0x0002
+#define EGL_LOCK_SURFACE_BIT_KHR          0x0080
+#define EGL_OPTIMAL_FORMAT_BIT_KHR        0x0100
+#define EGL_MATCH_FORMAT_KHR              0x3043
+#define EGL_FORMAT_RGB_565_EXACT_KHR      0x30C0
+#define EGL_FORMAT_RGB_565_KHR            0x30C1
+#define EGL_FORMAT_RGBA_8888_EXACT_KHR    0x30C2
+#define EGL_FORMAT_RGBA_8888_KHR          0x30C3
+#define EGL_MAP_PRESERVE_PIXELS_KHR       0x30C4
+#define EGL_LOCK_USAGE_HINT_KHR           0x30C5
+#define EGL_BITMAP_POINTER_KHR            0x30C6
+#define EGL_BITMAP_PITCH_KHR              0x30C7
+#define EGL_BITMAP_ORIGIN_KHR             0x30C8
+#define EGL_BITMAP_PIXEL_RED_OFFSET_KHR   0x30C9
+#define EGL_BITMAP_PIXEL_GREEN_OFFSET_KHR 0x30CA
+#define EGL_BITMAP_PIXEL_BLUE_OFFSET_KHR  0x30CB
+#define EGL_BITMAP_PIXEL_ALPHA_OFFSET_KHR 0x30CC
+#define EGL_BITMAP_PIXEL_LUMINANCE_OFFSET_KHR 0x30CD
+#define EGL_LOWER_LEFT_KHR                0x30CE
+#define EGL_UPPER_LEFT_KHR                0x30CF
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLLOCKSURFACEKHRPROC) (EGLDisplay dpy, EGLSurface surface, const EGLint *attrib_list);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLUNLOCKSURFACEKHRPROC) (EGLDisplay dpy, EGLSurface surface);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglLockSurfaceKHR (EGLDisplay dpy, EGLSurface surface, const EGLint *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglUnlockSurfaceKHR (EGLDisplay dpy, EGLSurface surface);
 #endif
+#endif /* EGL_KHR_lock_surface */
 
-#ifndef EGL_KHR_gl_texture_3D_image
-#define EGL_KHR_gl_texture_3D_image 1
-#define EGL_GL_TEXTURE_3D_KHR			0x30B2	/* eglCreateImageKHR target */
-#define EGL_GL_TEXTURE_ZOFFSET_KHR		0x30BD	/* eglCreateImageKHR attribute */
-#endif
+#ifndef EGL_KHR_lock_surface2
+#define EGL_KHR_lock_surface2 1
+#define EGL_BITMAP_PIXEL_SIZE_KHR         0x3110
+#endif /* EGL_KHR_lock_surface2 */
 
-#ifndef EGL_KHR_gl_renderbuffer_image
-#define EGL_KHR_gl_renderbuffer_image 1
-#define EGL_GL_RENDERBUFFER_KHR			0x30B9	/* eglCreateImageKHR target */
+#ifndef EGL_KHR_lock_surface3
+#define EGL_KHR_lock_surface3 1
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSURFACE64KHRPROC) (EGLDisplay dpy, EGLSurface surface, EGLint attribute, EGLAttribKHR *value);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurface64KHR (EGLDisplay dpy, EGLSurface surface, EGLint attribute, EGLAttribKHR *value);
 #endif
+#endif /* EGL_KHR_lock_surface3 */
+
+#ifndef EGL_KHR_platform_android
+#define EGL_KHR_platform_android 1
+#define EGL_PLATFORM_ANDROID_KHR          0x3141
+#endif /* EGL_KHR_platform_android */
+
+#ifndef EGL_KHR_platform_gbm
+#define EGL_KHR_platform_gbm 1
+#define EGL_PLATFORM_GBM_KHR              0x31D7
+#endif /* EGL_KHR_platform_gbm */
+
+#ifndef EGL_KHR_platform_wayland
+#define EGL_KHR_platform_wayland 1
+#define EGL_PLATFORM_WAYLAND_KHR          0x31D8
+#endif /* EGL_KHR_platform_wayland */
+
+#ifndef EGL_KHR_platform_x11
+#define EGL_KHR_platform_x11 1
+#define EGL_PLATFORM_X11_KHR              0x31D5
+#define EGL_PLATFORM_X11_SCREEN_KHR       0x31D6
+#endif /* EGL_KHR_platform_x11 */
 
-#if KHRONOS_SUPPORT_INT64   /* EGLTimeKHR requires 64-bit uint support */
 #ifndef EGL_KHR_reusable_sync
 #define EGL_KHR_reusable_sync 1
-
-typedef void* EGLSyncKHR;
 typedef khronos_utime_nanoseconds_t EGLTimeKHR;
-
-#define EGL_SYNC_STATUS_KHR			0x30F1
-#define EGL_SIGNALED_KHR			0x30F2
-#define EGL_UNSIGNALED_KHR			0x30F3
-#define EGL_TIMEOUT_EXPIRED_KHR			0x30F5
-#define EGL_CONDITION_SATISFIED_KHR		0x30F6
-#define EGL_SYNC_TYPE_KHR			0x30F7
-#define EGL_SYNC_REUSABLE_KHR			0x30FA
-#define EGL_SYNC_FLUSH_COMMANDS_BIT_KHR		0x0001	/* eglClientWaitSyncKHR <flags> bitfield */
-#define EGL_FOREVER_KHR				0xFFFFFFFFFFFFFFFFull
-#define EGL_NO_SYNC_KHR				((EGLSyncKHR)0)
-#ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLSyncKHR EGLAPIENTRY eglCreateSyncKHR(EGLDisplay dpy, EGLenum type, const EGLint *attrib_list);
-EGLAPI EGLBoolean EGLAPIENTRY eglDestroySyncKHR(EGLDisplay dpy, EGLSyncKHR sync);
-EGLAPI EGLint EGLAPIENTRY eglClientWaitSyncKHR(EGLDisplay dpy, EGLSyncKHR sync, EGLint flags, EGLTimeKHR timeout);
-EGLAPI EGLBoolean EGLAPIENTRY eglSignalSyncKHR(EGLDisplay dpy, EGLSyncKHR sync, EGLenum mode);
-EGLAPI EGLBoolean EGLAPIENTRY eglGetSyncAttribKHR(EGLDisplay dpy, EGLSyncKHR sync, EGLint attribute, EGLint *value);
-#endif /* EGL_EGLEXT_PROTOTYPES */
+#ifdef KHRONOS_SUPPORT_INT64
+#define EGL_SYNC_STATUS_KHR               0x30F1
+#define EGL_SIGNALED_KHR                  0x30F2
+#define EGL_UNSIGNALED_KHR                0x30F3
+#define EGL_TIMEOUT_EXPIRED_KHR           0x30F5
+#define EGL_CONDITION_SATISFIED_KHR       0x30F6
+#define EGL_SYNC_TYPE_KHR                 0x30F7
+#define EGL_SYNC_REUSABLE_KHR             0x30FA
+#define EGL_SYNC_FLUSH_COMMANDS_BIT_KHR   0x0001
+#define EGL_FOREVER_KHR                   0xFFFFFFFFFFFFFFFFull
+#define EGL_NO_SYNC_KHR                   ((EGLSyncKHR)0)
 typedef EGLSyncKHR (EGLAPIENTRYP PFNEGLCREATESYNCKHRPROC) (EGLDisplay dpy, EGLenum type, const EGLint *attrib_list);
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYSYNCKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync);
 typedef EGLint (EGLAPIENTRYP PFNEGLCLIENTWAITSYNCKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync, EGLint flags, EGLTimeKHR timeout);
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLSIGNALSYNCKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync, EGLenum mode);
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLGETSYNCATTRIBKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync, EGLint attribute, EGLint *value);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLSyncKHR EGLAPIENTRY eglCreateSyncKHR (EGLDisplay dpy, EGLenum type, const EGLint *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglDestroySyncKHR (EGLDisplay dpy, EGLSyncKHR sync);
+EGLAPI EGLint EGLAPIENTRY eglClientWaitSyncKHR (EGLDisplay dpy, EGLSyncKHR sync, EGLint flags, EGLTimeKHR timeout);
+EGLAPI EGLBoolean EGLAPIENTRY eglSignalSyncKHR (EGLDisplay dpy, EGLSyncKHR sync, EGLenum mode);
+EGLAPI EGLBoolean EGLAPIENTRY eglGetSyncAttribKHR (EGLDisplay dpy, EGLSyncKHR sync, EGLint attribute, EGLint *value);
+#endif
+#endif /* KHRONOS_SUPPORT_INT64 */
+#endif /* EGL_KHR_reusable_sync */
+
+#ifndef EGL_KHR_stream
+#define EGL_KHR_stream 1
+typedef void *EGLStreamKHR;
+typedef khronos_uint64_t EGLuint64KHR;
+#ifdef KHRONOS_SUPPORT_INT64
+#define EGL_NO_STREAM_KHR                 ((EGLStreamKHR)0)
+#define EGL_CONSUMER_LATENCY_USEC_KHR     0x3210
+#define EGL_PRODUCER_FRAME_KHR            0x3212
+#define EGL_CONSUMER_FRAME_KHR            0x3213
+#define EGL_STREAM_STATE_KHR              0x3214
+#define EGL_STREAM_STATE_CREATED_KHR      0x3215
+#define EGL_STREAM_STATE_CONNECTING_KHR   0x3216
+#define EGL_STREAM_STATE_EMPTY_KHR        0x3217
+#define EGL_STREAM_STATE_NEW_FRAME_AVAILABLE_KHR 0x3218
+#define EGL_STREAM_STATE_OLD_FRAME_AVAILABLE_KHR 0x3219
+#define EGL_STREAM_STATE_DISCONNECTED_KHR 0x321A
+#define EGL_BAD_STREAM_KHR                0x321B
+#define EGL_BAD_STATE_KHR                 0x321C
+typedef EGLStreamKHR (EGLAPIENTRYP PFNEGLCREATESTREAMKHRPROC) (EGLDisplay dpy, const EGLint *attrib_list);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYSTREAMKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSTREAMATTRIBKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLint value);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSTREAMKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLint *value);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSTREAMU64KHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLuint64KHR *value);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLStreamKHR EGLAPIENTRY eglCreateStreamKHR (EGLDisplay dpy, const EGLint *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglDestroyStreamKHR (EGLDisplay dpy, EGLStreamKHR stream);
+EGLAPI EGLBoolean EGLAPIENTRY eglStreamAttribKHR (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLint value);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryStreamKHR (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLint *value);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryStreamu64KHR (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLuint64KHR *value);
+#endif
+#endif /* KHRONOS_SUPPORT_INT64 */
+#endif /* EGL_KHR_stream */
+
+#ifndef EGL_KHR_stream_consumer_gltexture
+#define EGL_KHR_stream_consumer_gltexture 1
+#ifdef EGL_KHR_stream
+#define EGL_CONSUMER_ACQUIRE_TIMEOUT_USEC_KHR 0x321E
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSTREAMCONSUMERGLTEXTUREEXTERNALKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSTREAMCONSUMERACQUIREKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSTREAMCONSUMERRELEASEKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerGLTextureExternalKHR (EGLDisplay dpy, EGLStreamKHR stream);
+EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerAcquireKHR (EGLDisplay dpy, EGLStreamKHR stream);
+EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerReleaseKHR (EGLDisplay dpy, EGLStreamKHR stream);
+#endif
+#endif /* EGL_KHR_stream */
+#endif /* EGL_KHR_stream_consumer_gltexture */
+
+#ifndef EGL_KHR_stream_cross_process_fd
+#define EGL_KHR_stream_cross_process_fd 1
+typedef int EGLNativeFileDescriptorKHR;
+#ifdef EGL_KHR_stream
+#define EGL_NO_FILE_DESCRIPTOR_KHR        ((EGLNativeFileDescriptorKHR)(-1))
+typedef EGLNativeFileDescriptorKHR (EGLAPIENTRYP PFNEGLGETSTREAMFILEDESCRIPTORKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream);
+typedef EGLStreamKHR (EGLAPIENTRYP PFNEGLCREATESTREAMFROMFILEDESCRIPTORKHRPROC) (EGLDisplay dpy, EGLNativeFileDescriptorKHR file_descriptor);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLNativeFileDescriptorKHR EGLAPIENTRY eglGetStreamFileDescriptorKHR (EGLDisplay dpy, EGLStreamKHR stream);
+EGLAPI EGLStreamKHR EGLAPIENTRY eglCreateStreamFromFileDescriptorKHR (EGLDisplay dpy, EGLNativeFileDescriptorKHR file_descriptor);
+#endif
+#endif /* EGL_KHR_stream */
+#endif /* EGL_KHR_stream_cross_process_fd */
+
+#ifndef EGL_KHR_stream_fifo
+#define EGL_KHR_stream_fifo 1
+#ifdef EGL_KHR_stream
+#define EGL_STREAM_FIFO_LENGTH_KHR        0x31FC
+#define EGL_STREAM_TIME_NOW_KHR           0x31FD
+#define EGL_STREAM_TIME_CONSUMER_KHR      0x31FE
+#define EGL_STREAM_TIME_PRODUCER_KHR      0x31FF
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSTREAMTIMEKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLTimeKHR *value);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryStreamTimeKHR (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLTimeKHR *value);
+#endif
+#endif /* EGL_KHR_stream */
+#endif /* EGL_KHR_stream_fifo */
+
+#ifndef EGL_KHR_stream_producer_aldatalocator
+#define EGL_KHR_stream_producer_aldatalocator 1
+#ifdef EGL_KHR_stream
+#endif /* EGL_KHR_stream */
+#endif /* EGL_KHR_stream_producer_aldatalocator */
+
+#ifndef EGL_KHR_stream_producer_eglsurface
+#define EGL_KHR_stream_producer_eglsurface 1
+#ifdef EGL_KHR_stream
+#define EGL_STREAM_BIT_KHR                0x0800
+typedef EGLSurface (EGLAPIENTRYP PFNEGLCREATESTREAMPRODUCERSURFACEKHRPROC) (EGLDisplay dpy, EGLConfig config, EGLStreamKHR stream, const EGLint *attrib_list);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLSurface EGLAPIENTRY eglCreateStreamProducerSurfaceKHR (EGLDisplay dpy, EGLConfig config, EGLStreamKHR stream, const EGLint *attrib_list);
 #endif
-#endif
+#endif /* EGL_KHR_stream */
+#endif /* EGL_KHR_stream_producer_eglsurface */
 
-#ifndef EGL_KHR_image_base
-#define EGL_KHR_image_base 1
-/* Most interfaces defined by EGL_KHR_image_pixmap above */
-#define EGL_IMAGE_PRESERVED_KHR			0x30D2	/* eglCreateImageKHR attribute */
-#endif
+#ifndef EGL_KHR_surfaceless_context
+#define EGL_KHR_surfaceless_context 1
+#endif /* EGL_KHR_surfaceless_context */
 
-#ifndef EGL_KHR_image_pixmap
-#define EGL_KHR_image_pixmap 1
-/* Interfaces defined by EGL_KHR_image above */
-#endif
+#ifndef EGL_KHR_vg_parent_image
+#define EGL_KHR_vg_parent_image 1
+#define EGL_VG_PARENT_IMAGE_KHR           0x30BA
+#endif /* EGL_KHR_vg_parent_image */
 
-#ifndef EGL_IMG_context_priority
-#define EGL_IMG_context_priority 1
-#define EGL_CONTEXT_PRIORITY_LEVEL_IMG		0x3100
-#define EGL_CONTEXT_PRIORITY_HIGH_IMG		0x3101
-#define EGL_CONTEXT_PRIORITY_MEDIUM_IMG		0x3102
-#define EGL_CONTEXT_PRIORITY_LOW_IMG		0x3103
+#ifndef EGL_KHR_wait_sync
+#define EGL_KHR_wait_sync 1
+typedef EGLint (EGLAPIENTRYP PFNEGLWAITSYNCKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync, EGLint flags);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLint EGLAPIENTRY eglWaitSyncKHR (EGLDisplay dpy, EGLSyncKHR sync, EGLint flags);
 #endif
+#endif /* EGL_KHR_wait_sync */
 
-#ifndef EGL_KHR_lock_surface2
-#define EGL_KHR_lock_surface2 1
-#define EGL_BITMAP_PIXEL_SIZE_KHR		0x3110
+#ifndef EGL_ANDROID_blob_cache
+#define EGL_ANDROID_blob_cache 1
+typedef khronos_ssize_t EGLsizeiANDROID;
+typedef void (*EGLSetBlobFuncANDROID) (const void *key, EGLsizeiANDROID keySize, const void *value, EGLsizeiANDROID valueSize);
+typedef EGLsizeiANDROID (*EGLGetBlobFuncANDROID) (const void *key, EGLsizeiANDROID keySize, void *value, EGLsizeiANDROID valueSize);
+typedef void (EGLAPIENTRYP PFNEGLSETBLOBCACHEFUNCSANDROIDPROC) (EGLDisplay dpy, EGLSetBlobFuncANDROID set, EGLGetBlobFuncANDROID get);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI void EGLAPIENTRY eglSetBlobCacheFuncsANDROID (EGLDisplay dpy, EGLSetBlobFuncANDROID set, EGLGetBlobFuncANDROID get);
+#endif
+#endif /* EGL_ANDROID_blob_cache */
+
+#ifndef EGL_ANDROID_framebuffer_target
+#define EGL_ANDROID_framebuffer_target 1
+#define EGL_FRAMEBUFFER_TARGET_ANDROID    0x3147
+#endif /* EGL_ANDROID_framebuffer_target */
+
+#ifndef EGL_ANDROID_image_native_buffer
+#define EGL_ANDROID_image_native_buffer 1
+#define EGL_NATIVE_BUFFER_ANDROID         0x3140
+#endif /* EGL_ANDROID_image_native_buffer */
+
+#ifndef EGL_ANDROID_native_fence_sync
+#define EGL_ANDROID_native_fence_sync 1
+#define EGL_SYNC_NATIVE_FENCE_ANDROID     0x3144
+#define EGL_SYNC_NATIVE_FENCE_FD_ANDROID  0x3145
+#define EGL_SYNC_NATIVE_FENCE_SIGNALED_ANDROID 0x3146
+#define EGL_NO_NATIVE_FENCE_FD_ANDROID    -1
+typedef EGLint (EGLAPIENTRYP PFNEGLDUPNATIVEFENCEFDANDROIDPROC) (EGLDisplay dpy, EGLSyncKHR sync);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLint EGLAPIENTRY eglDupNativeFenceFDANDROID (EGLDisplay dpy, EGLSyncKHR sync);
 #endif
+#endif /* EGL_ANDROID_native_fence_sync */
 
-#ifndef EGL_NV_coverage_sample
-#define EGL_NV_coverage_sample 1
-#define EGL_COVERAGE_BUFFERS_NV			0x30E0
-#define EGL_COVERAGE_SAMPLES_NV			0x30E1
-#endif
+#ifndef EGL_ANDROID_recordable
+#define EGL_ANDROID_recordable 1
+#define EGL_RECORDABLE_ANDROID            0x3142
+#endif /* EGL_ANDROID_recordable */
 
-#ifndef EGL_NV_depth_nonlinear
-#define EGL_NV_depth_nonlinear 1
-#define EGL_DEPTH_ENCODING_NV			0x30E2
-#define EGL_DEPTH_ENCODING_NONE_NV 0
-#define EGL_DEPTH_ENCODING_NONLINEAR_NV		0x30E3
-#endif
+#ifndef EGL_ANGLE_d3d_share_handle_client_buffer
+#define EGL_ANGLE_d3d_share_handle_client_buffer 1
+#define EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE 0x3200
+#endif /* EGL_ANGLE_d3d_share_handle_client_buffer */
 
-#if KHRONOS_SUPPORT_INT64   /* EGLTimeNV requires 64-bit uint support */
-#ifndef EGL_NV_sync
-#define EGL_NV_sync 1
-#define EGL_SYNC_PRIOR_COMMANDS_COMPLETE_NV	0x30E6
-#define EGL_SYNC_STATUS_NV			0x30E7
-#define EGL_SIGNALED_NV				0x30E8
-#define EGL_UNSIGNALED_NV			0x30E9
-#define EGL_SYNC_FLUSH_COMMANDS_BIT_NV		0x0001
-#define EGL_FOREVER_NV				0xFFFFFFFFFFFFFFFFull
-#define EGL_ALREADY_SIGNALED_NV			0x30EA
-#define EGL_TIMEOUT_EXPIRED_NV			0x30EB
-#define EGL_CONDITION_SATISFIED_NV		0x30EC
-#define EGL_SYNC_TYPE_NV			0x30ED
-#define EGL_SYNC_CONDITION_NV			0x30EE
-#define EGL_SYNC_FENCE_NV			0x30EF
-#define EGL_NO_SYNC_NV				((EGLSyncNV)0)
-typedef void* EGLSyncNV;
-typedef khronos_utime_nanoseconds_t EGLTimeNV;
+#ifndef EGL_ANGLE_window_fixed_size
+#define EGL_ANGLE_window_fixed_size 1
+#define EGL_FIXED_SIZE_ANGLE        0x3201
+#endif /* EGL_ANGLE_window_fixed_size */
+
+#ifndef EGL_ANGLE_query_surface_pointer
+#define EGL_ANGLE_query_surface_pointer 1
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSURFACEPOINTERANGLEPROC) (EGLDisplay dpy, EGLSurface surface, EGLint attribute, void **value);
 #ifdef EGL_EGLEXT_PROTOTYPES
-EGLSyncNV eglCreateFenceSyncNV (EGLDisplay dpy, EGLenum condition, const EGLint *attrib_list);
-EGLBoolean eglDestroySyncNV (EGLSyncNV sync);
-EGLBoolean eglFenceNV (EGLSyncNV sync);
-EGLint eglClientWaitSyncNV (EGLSyncNV sync, EGLint flags, EGLTimeNV timeout);
-EGLBoolean eglSignalSyncNV (EGLSyncNV sync, EGLenum mode);
-EGLBoolean eglGetSyncAttribNV (EGLSyncNV sync, EGLint attribute, EGLint *value);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLSyncNV (EGLAPIENTRYP PFNEGLCREATEFENCESYNCNVPROC) (EGLDisplay dpy, EGLenum condition, const EGLint *attrib_list);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYSYNCNVPROC) (EGLSyncNV sync);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLFENCENVPROC) (EGLSyncNV sync);
-typedef EGLint (EGLAPIENTRYP PFNEGLCLIENTWAITSYNCNVPROC) (EGLSyncNV sync, EGLint flags, EGLTimeNV timeout);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLSIGNALSYNCNVPROC) (EGLSyncNV sync, EGLenum mode);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLGETSYNCATTRIBNVPROC) (EGLSyncNV sync, EGLint attribute, EGLint *value);
-#endif
+EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurfacePointerANGLE (EGLDisplay dpy, EGLSurface surface, EGLint attribute, void **value);
 #endif
+#endif /* EGL_ANGLE_query_surface_pointer */
 
-#if KHRONOS_SUPPORT_INT64   /* Dependent on EGL_KHR_reusable_sync which requires 64-bit uint support */
-#ifndef EGL_KHR_fence_sync
-#define EGL_KHR_fence_sync 1
-/* Reuses most tokens and entry points from EGL_KHR_reusable_sync */
-#define EGL_SYNC_PRIOR_COMMANDS_COMPLETE_KHR	0x30F0
-#define EGL_SYNC_CONDITION_KHR			0x30F8
-#define EGL_SYNC_FENCE_KHR			0x30F9
-#endif
+#ifndef EGL_ANGLE_software_display
+#define EGL_ANGLE_software_display 1
+#define EGL_SOFTWARE_DISPLAY_ANGLE ((EGLNativeDisplayType)-1)
+#endif /* EGL_ANGLE_software_display */
+
+#ifndef EGL_ANGLE_direct3d_display
+#define EGL_ANGLE_direct3d_display 1
+#define EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ((EGLNativeDisplayType)-2)
+#define EGL_D3D11_ONLY_DISPLAY_ANGLE ((EGLNativeDisplayType)-3)
+#endif /* EGL_ANGLE_direct3d_display */
+
+#ifndef EGL_ANGLE_surface_d3d_texture_2d_share_handle
+#define EGL_ANGLE_surface_d3d_texture_2d_share_handle 1
+#endif /* EGL_ANGLE_surface_d3d_texture_2d_share_handle */
+
+#ifndef EGL_ANGLE_platform_angle
+#define EGL_ANGLE_platform_angle 1
+#define EGL_PLATFORM_ANGLE_ANGLE          0x3201
+#define EGL_PLATFORM_ANGLE_TYPE_ANGLE     0x3202
+#define EGL_PLATFORM_ANGLE_TYPE_DEFAULT_ANGLE 0x3203
+#endif /* EGL_ANGLE_platform_angle */
+
+#ifndef EGL_ANGLE_platform_angle_d3d
+#define EGL_ANGLE_platform_angle_d3d 1
+#define EGL_PLATFORM_ANGLE_TYPE_D3D9_ANGLE 0x3204
+#define EGL_PLATFORM_ANGLE_TYPE_D3D11_ANGLE 0x3205
+#define EGL_PLATFORM_ANGLE_TYPE_D3D11_WARP_ANGLE 0x3206
+#endif /* EGL_ANGLE_platform_angle_d3d */
+
+#ifndef EGL_ANGLE_platform_angle_opengl
+#define EGL_ANGLE_platform_angle_opengl 1
+#define EGL_PLATFORM_ANGLE_TYPE_OPENGL_ANGLE 0x3207
+#define EGL_PLATFORM_ANGLE_TYPE_OPENGLES_ANGLE 0x3208
+#endif /* EGL_ANGLE_platform_angle_opengl */
+
+#ifndef EGL_ARM_pixmap_multisample_discard
+#define EGL_ARM_pixmap_multisample_discard 1
+#define EGL_DISCARD_SAMPLES_ARM           0x3286
+#endif /* EGL_ARM_pixmap_multisample_discard */
+
+#ifndef EGL_EXT_buffer_age
+#define EGL_EXT_buffer_age 1
+#define EGL_BUFFER_AGE_EXT                0x313D
+#endif /* EGL_EXT_buffer_age */
+
+#ifndef EGL_EXT_client_extensions
+#define EGL_EXT_client_extensions 1
+#endif /* EGL_EXT_client_extensions */
+
+#ifndef EGL_EXT_create_context_robustness
+#define EGL_EXT_create_context_robustness 1
+#define EGL_CONTEXT_OPENGL_ROBUST_ACCESS_EXT 0x30BF
+#define EGL_CONTEXT_OPENGL_RESET_NOTIFICATION_STRATEGY_EXT 0x3138
+#define EGL_NO_RESET_NOTIFICATION_EXT     0x31BE
+#define EGL_LOSE_CONTEXT_ON_RESET_EXT     0x31BF
+#endif /* EGL_EXT_create_context_robustness */
+
+#ifndef EGL_EXT_device_base
+#define EGL_EXT_device_base 1
+typedef void *EGLDeviceEXT;
+#define EGL_NO_DEVICE_EXT                 ((EGLDeviceEXT)(0))
+#define EGL_BAD_DEVICE_EXT                0x322B
+#define EGL_DEVICE_EXT                    0x322C
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYDEVICEATTRIBEXTPROC) (EGLDeviceEXT device, EGLint attribute, EGLAttrib *value);
+typedef const char *(EGLAPIENTRYP PFNEGLQUERYDEVICESTRINGEXTPROC) (EGLDeviceEXT device, EGLint name);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYDEVICESEXTPROC) (EGLint max_devices, EGLDeviceEXT *devices, EGLint *num_devices);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYDISPLAYATTRIBEXTPROC) (EGLDisplay dpy, EGLint attribute, EGLAttrib *value);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryDeviceAttribEXT (EGLDeviceEXT device, EGLint attribute, EGLAttrib *value);
+EGLAPI const char *EGLAPIENTRY eglQueryDeviceStringEXT (EGLDeviceEXT device, EGLint name);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryDevicesEXT (EGLint max_devices, EGLDeviceEXT *devices, EGLint *num_devices);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryDisplayAttribEXT (EGLDisplay dpy, EGLint attribute, EGLAttrib *value);
+#endif
+#endif /* EGL_EXT_device_base */
+
+#ifndef EGL_EXT_image_dma_buf_import
+#define EGL_EXT_image_dma_buf_import 1
+#define EGL_LINUX_DMA_BUF_EXT             0x3270
+#define EGL_LINUX_DRM_FOURCC_EXT          0x3271
+#define EGL_DMA_BUF_PLANE0_FD_EXT         0x3272
+#define EGL_DMA_BUF_PLANE0_OFFSET_EXT     0x3273
+#define EGL_DMA_BUF_PLANE0_PITCH_EXT      0x3274
+#define EGL_DMA_BUF_PLANE1_FD_EXT         0x3275
+#define EGL_DMA_BUF_PLANE1_OFFSET_EXT     0x3276
+#define EGL_DMA_BUF_PLANE1_PITCH_EXT      0x3277
+#define EGL_DMA_BUF_PLANE2_FD_EXT         0x3278
+#define EGL_DMA_BUF_PLANE2_OFFSET_EXT     0x3279
+#define EGL_DMA_BUF_PLANE2_PITCH_EXT      0x327A
+#define EGL_YUV_COLOR_SPACE_HINT_EXT      0x327B
+#define EGL_SAMPLE_RANGE_HINT_EXT         0x327C
+#define EGL_YUV_CHROMA_HORIZONTAL_SITING_HINT_EXT 0x327D
+#define EGL_YUV_CHROMA_VERTICAL_SITING_HINT_EXT 0x327E
+#define EGL_ITU_REC601_EXT                0x327F
+#define EGL_ITU_REC709_EXT                0x3280
+#define EGL_ITU_REC2020_EXT               0x3281
+#define EGL_YUV_FULL_RANGE_EXT            0x3282
+#define EGL_YUV_NARROW_RANGE_EXT          0x3283
+#define EGL_YUV_CHROMA_SITING_0_EXT       0x3284
+#define EGL_YUV_CHROMA_SITING_0_5_EXT     0x3285
+#endif /* EGL_EXT_image_dma_buf_import */
+
+#ifndef EGL_EXT_multiview_window
+#define EGL_EXT_multiview_window 1
+#define EGL_MULTIVIEW_VIEW_COUNT_EXT      0x3134
+#endif /* EGL_EXT_multiview_window */
+
+#ifndef EGL_EXT_platform_base
+#define EGL_EXT_platform_base 1
+typedef EGLDisplay (EGLAPIENTRYP PFNEGLGETPLATFORMDISPLAYEXTPROC) (EGLenum platform, void *native_display, const EGLint *attrib_list);
+typedef EGLSurface (EGLAPIENTRYP PFNEGLCREATEPLATFORMWINDOWSURFACEEXTPROC) (EGLDisplay dpy, EGLConfig config, void *native_window, const EGLint *attrib_list);
+typedef EGLSurface (EGLAPIENTRYP PFNEGLCREATEPLATFORMPIXMAPSURFACEEXTPROC) (EGLDisplay dpy, EGLConfig config, void *native_pixmap, const EGLint *attrib_list);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLDisplay EGLAPIENTRY eglGetPlatformDisplayEXT (EGLenum platform, void *native_display, const EGLint *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePlatformWindowSurfaceEXT (EGLDisplay dpy, EGLConfig config, void *native_window, const EGLint *attrib_list);
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePlatformPixmapSurfaceEXT (EGLDisplay dpy, EGLConfig config, void *native_pixmap, const EGLint *attrib_list);
+#endif
+#endif /* EGL_EXT_platform_base */
+
+#ifndef EGL_EXT_platform_device
+#define EGL_EXT_platform_device 1
+#define EGL_PLATFORM_DEVICE_EXT           0x313F
+#endif /* EGL_EXT_platform_device */
+
+#ifndef EGL_EXT_platform_wayland
+#define EGL_EXT_platform_wayland 1
+#define EGL_PLATFORM_WAYLAND_EXT          0x31D8
+#endif /* EGL_EXT_platform_wayland */
+
+#ifndef EGL_EXT_platform_x11
+#define EGL_EXT_platform_x11 1
+#define EGL_PLATFORM_X11_EXT              0x31D5
+#define EGL_PLATFORM_X11_SCREEN_EXT       0x31D6
+#endif /* EGL_EXT_platform_x11 */
+
+#ifndef EGL_EXT_protected_surface
+#define EGL_EXT_protected_surface 1
+#define EGL_PROTECTED_CONTENT_EXT         0x32C0
+#endif /* EGL_EXT_protected_surface */
+
+#ifndef EGL_EXT_swap_buffers_with_damage
+#define EGL_EXT_swap_buffers_with_damage 1
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSWAPBUFFERSWITHDAMAGEEXTPROC) (EGLDisplay dpy, EGLSurface surface, EGLint *rects, EGLint n_rects);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffersWithDamageEXT (EGLDisplay dpy, EGLSurface surface, EGLint *rects, EGLint n_rects);
 #endif
+#endif /* EGL_EXT_swap_buffers_with_damage */
 
 #ifndef EGL_HI_clientpixmap
 #define EGL_HI_clientpixmap 1
-
-/* Surface Attribute */
-#define EGL_CLIENT_PIXMAP_POINTER_HI		0x8F74
-/*
- * Structure representing a client pixmap
- * (pixmap's data is in client-space memory).
- */
-struct EGLClientPixmapHI
-{
-	void*		pData;
-	EGLint		iWidth;
-	EGLint		iHeight;
-	EGLint		iStride;
+struct EGLClientPixmapHI {
+    void  *pData;
+    EGLint iWidth;
+    EGLint iHeight;
+    EGLint iStride;
 };
-
+#define EGL_CLIENT_PIXMAP_POINTER_HI      0x8F74
+typedef EGLSurface (EGLAPIENTRYP PFNEGLCREATEPIXMAPSURFACEHIPROC) (EGLDisplay dpy, EGLConfig config, struct EGLClientPixmapHI *pixmap);
 #ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLSurface EGLAPIENTRY eglCreatePixmapSurfaceHI(EGLDisplay dpy, EGLConfig config, struct EGLClientPixmapHI* pixmap);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLSurface (EGLAPIENTRYP PFNEGLCREATEPIXMAPSURFACEHIPROC) (EGLDisplay dpy, EGLConfig config, struct EGLClientPixmapHI* pixmap);
-#endif	/* EGL_HI_clientpixmap */
+EGLAPI EGLSurface EGLAPIENTRY eglCreatePixmapSurfaceHI (EGLDisplay dpy, EGLConfig config, struct EGLClientPixmapHI *pixmap);
+#endif
+#endif /* EGL_HI_clientpixmap */
 
 #ifndef EGL_HI_colorformats
 #define EGL_HI_colorformats 1
-/* Config Attribute */
-#define EGL_COLOR_FORMAT_HI			0x8F70
-/* Color Formats */
-#define EGL_COLOR_RGB_HI			0x8F71
-#define EGL_COLOR_RGBA_HI			0x8F72
-#define EGL_COLOR_ARGB_HI			0x8F73
+#define EGL_COLOR_FORMAT_HI               0x8F70
+#define EGL_COLOR_RGB_HI                  0x8F71
+#define EGL_COLOR_RGBA_HI                 0x8F72
+#define EGL_COLOR_ARGB_HI                 0x8F73
 #endif /* EGL_HI_colorformats */
 
+#ifndef EGL_IMG_context_priority
+#define EGL_IMG_context_priority 1
+#define EGL_CONTEXT_PRIORITY_LEVEL_IMG    0x3100
+#define EGL_CONTEXT_PRIORITY_HIGH_IMG     0x3101
+#define EGL_CONTEXT_PRIORITY_MEDIUM_IMG   0x3102
+#define EGL_CONTEXT_PRIORITY_LOW_IMG      0x3103
+#endif /* EGL_IMG_context_priority */
+
 #ifndef EGL_MESA_drm_image
 #define EGL_MESA_drm_image 1
-#define EGL_DRM_BUFFER_FORMAT_MESA		0x31D0	    /* CreateDRMImageMESA attribute */
-#define EGL_DRM_BUFFER_USE_MESA			0x31D1	    /* CreateDRMImageMESA attribute */
-#define EGL_DRM_BUFFER_FORMAT_ARGB32_MESA	0x31D2	    /* EGL_IMAGE_FORMAT_MESA attribute value */
-#define EGL_DRM_BUFFER_MESA			0x31D3	    /* eglCreateImageKHR target */
-#define EGL_DRM_BUFFER_STRIDE_MESA		0x31D4
-#define EGL_DRM_BUFFER_USE_SCANOUT_MESA		0x00000001  /* EGL_DRM_BUFFER_USE_MESA bits */
-#define EGL_DRM_BUFFER_USE_SHARE_MESA		0x00000002  /* EGL_DRM_BUFFER_USE_MESA bits */
+#define EGL_DRM_BUFFER_FORMAT_MESA        0x31D0
+#define EGL_DRM_BUFFER_USE_MESA           0x31D1
+#define EGL_DRM_BUFFER_FORMAT_ARGB32_MESA 0x31D2
+#define EGL_DRM_BUFFER_MESA               0x31D3
+#define EGL_DRM_BUFFER_STRIDE_MESA        0x31D4
+#define EGL_DRM_BUFFER_USE_SCANOUT_MESA   0x00000001
+#define EGL_DRM_BUFFER_USE_SHARE_MESA     0x00000002
+typedef EGLImageKHR (EGLAPIENTRYP PFNEGLCREATEDRMIMAGEMESAPROC) (EGLDisplay dpy, const EGLint *attrib_list);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLEXPORTDRMIMAGEMESAPROC) (EGLDisplay dpy, EGLImageKHR image, EGLint *name, EGLint *handle, EGLint *stride);
 #ifdef EGL_EGLEXT_PROTOTYPES
 EGLAPI EGLImageKHR EGLAPIENTRY eglCreateDRMImageMESA (EGLDisplay dpy, const EGLint *attrib_list);
 EGLAPI EGLBoolean EGLAPIENTRY eglExportDRMImageMESA (EGLDisplay dpy, EGLImageKHR image, EGLint *name, EGLint *handle, EGLint *stride);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLImageKHR (EGLAPIENTRYP PFNEGLCREATEDRMIMAGEMESAPROC) (EGLDisplay dpy, const EGLint *attrib_list);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLEXPORTDRMIMAGEMESAPROC) (EGLDisplay dpy, EGLImageKHR image, EGLint *name, EGLint *handle, EGLint *stride);
 #endif
+#endif /* EGL_MESA_drm_image */
 
-#ifndef EGL_NV_post_sub_buffer
-#define EGL_NV_post_sub_buffer 1
-#define EGL_POST_SUB_BUFFER_SUPPORTED_NV	0x30BE
+#ifndef EGL_MESA_platform_gbm
+#define EGL_MESA_platform_gbm 1
+#define EGL_PLATFORM_GBM_MESA             0x31D7
+#endif /* EGL_MESA_platform_gbm */
+
+#ifndef EGL_NOK_swap_region
+#define EGL_NOK_swap_region 1
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSWAPBUFFERSREGIONNOKPROC) (EGLDisplay dpy, EGLSurface surface, EGLint numRects, const EGLint *rects);
 #ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLBoolean EGLAPIENTRY eglPostSubBufferNV (EGLDisplay dpy, EGLSurface surface, EGLint x, EGLint y, EGLint width, EGLint height);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLPOSTSUBBUFFERNVPROC) (EGLDisplay dpy, EGLSurface surface, EGLint x, EGLint y, EGLint width, EGLint height);
+EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffersRegionNOK (EGLDisplay dpy, EGLSurface surface, EGLint numRects, const EGLint *rects);
 #endif
+#endif /* EGL_NOK_swap_region */
 
-#ifndef EGL_ANGLE_query_surface_pointer
-#define EGL_ANGLE_query_surface_pointer 1
+#ifndef EGL_NOK_swap_region2
+#define EGL_NOK_swap_region2 1
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSWAPBUFFERSREGION2NOKPROC) (EGLDisplay dpy, EGLSurface surface, EGLint numRects, const EGLint *rects);
 #ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLBoolean eglQuerySurfacePointerANGLE(EGLDisplay dpy, EGLSurface surface, EGLint attribute, void **value);
-#endif
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSURFACEPOINTERANGLEPROC) (EGLDisplay dpy, EGLSurface surface, EGLint attribute, void **value);
+EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffersRegion2NOK (EGLDisplay dpy, EGLSurface surface, EGLint numRects, const EGLint *rects);
 #endif
+#endif /* EGL_NOK_swap_region2 */
 
-#ifndef EGL_ANGLE_software_display
-#define EGL_ANGLE_software_display 1
-#define EGL_SOFTWARE_DISPLAY_ANGLE ((EGLNativeDisplayType)-1)
-#endif
+#ifndef EGL_NOK_texture_from_pixmap
+#define EGL_NOK_texture_from_pixmap 1
+#define EGL_Y_INVERTED_NOK                0x307F
+#endif /* EGL_NOK_texture_from_pixmap */
 
-#ifndef EGL_ANGLE_direct3d_display
-#define EGL_ANGLE_direct3d_display 1
-#define EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ((EGLNativeDisplayType)-2)
-#define EGL_D3D11_ONLY_DISPLAY_ANGLE ((EGLNativeDisplayType)-3)
-#endif
+#ifndef EGL_NV_3dvision_surface
+#define EGL_NV_3dvision_surface 1
+#define EGL_AUTO_STEREO_NV                0x3136
+#endif /* EGL_NV_3dvision_surface */
 
-#ifndef EGL_ANGLE_surface_d3d_texture_2d_share_handle
-#define EGL_ANGLE_surface_d3d_texture_2d_share_handle 1
-#define EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE	0x3200
-#endif
+#ifndef EGL_NV_coverage_sample
+#define EGL_NV_coverage_sample 1
+#define EGL_COVERAGE_BUFFERS_NV           0x30E0
+#define EGL_COVERAGE_SAMPLES_NV           0x30E1
+#endif /* EGL_NV_coverage_sample */
 
 #ifndef EGL_NV_coverage_sample_resolve
 #define EGL_NV_coverage_sample_resolve 1
-#define EGL_COVERAGE_SAMPLE_RESOLVE_NV		0x3131
-#define EGL_COVERAGE_SAMPLE_RESOLVE_DEFAULT_NV	0x3132
-#define EGL_COVERAGE_SAMPLE_RESOLVE_NONE_NV	0x3133
+#define EGL_COVERAGE_SAMPLE_RESOLVE_NV    0x3131
+#define EGL_COVERAGE_SAMPLE_RESOLVE_DEFAULT_NV 0x3132
+#define EGL_COVERAGE_SAMPLE_RESOLVE_NONE_NV 0x3133
+#endif /* EGL_NV_coverage_sample_resolve */
+
+#ifndef EGL_NV_depth_nonlinear
+#define EGL_NV_depth_nonlinear 1
+#define EGL_DEPTH_ENCODING_NV             0x30E2
+#define EGL_DEPTH_ENCODING_NONE_NV        0
+#define EGL_DEPTH_ENCODING_NONLINEAR_NV   0x30E3
+#endif /* EGL_NV_depth_nonlinear */
+
+#ifndef EGL_NV_native_query
+#define EGL_NV_native_query 1
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYNATIVEDISPLAYNVPROC) (EGLDisplay dpy, EGLNativeDisplayType *display_id);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYNATIVEWINDOWNVPROC) (EGLDisplay dpy, EGLSurface surf, EGLNativeWindowType *window);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYNATIVEPIXMAPNVPROC) (EGLDisplay dpy, EGLSurface surf, EGLNativePixmapType *pixmap);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryNativeDisplayNV (EGLDisplay dpy, EGLNativeDisplayType *display_id);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryNativeWindowNV (EGLDisplay dpy, EGLSurface surf, EGLNativeWindowType *window);
+EGLAPI EGLBoolean EGLAPIENTRY eglQueryNativePixmapNV (EGLDisplay dpy, EGLSurface surf, EGLNativePixmapType *pixmap);
 #endif
+#endif /* EGL_NV_native_query */
 
-#if KHRONOS_SUPPORT_INT64   /* EGLTimeKHR requires 64-bit uint support */
-#ifndef EGL_NV_system_time
-#define EGL_NV_system_time 1
+#ifndef EGL_NV_post_convert_rounding
+#define EGL_NV_post_convert_rounding 1
+#endif /* EGL_NV_post_convert_rounding */
 
-typedef khronos_utime_nanoseconds_t EGLuint64NV;
+#ifndef EGL_NV_post_sub_buffer
+#define EGL_NV_post_sub_buffer 1
+#define EGL_POST_SUB_BUFFER_SUPPORTED_NV  0x30BE
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLPOSTSUBBUFFERNVPROC) (EGLDisplay dpy, EGLSurface surface, EGLint x, EGLint y, EGLint width, EGLint height);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLBoolean EGLAPIENTRY eglPostSubBufferNV (EGLDisplay dpy, EGLSurface surface, EGLint x, EGLint y, EGLint width, EGLint height);
+#endif
+#endif /* EGL_NV_post_sub_buffer */
 
+#ifndef EGL_NV_stream_sync
+#define EGL_NV_stream_sync 1
+#define EGL_SYNC_NEW_FRAME_NV             0x321F
+typedef EGLSyncKHR (EGLAPIENTRYP PFNEGLCREATESTREAMSYNCNVPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum type, const EGLint *attrib_list);
 #ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLuint64NV EGLAPIENTRY eglGetSystemTimeFrequencyNV(void);
-EGLAPI EGLuint64NV EGLAPIENTRY eglGetSystemTimeNV(void);
-#endif /* EGL_EGLEXT_PROTOTYPES */
-typedef EGLuint64NV (EGLAPIENTRYP PFNEGLGETSYSTEMTIMEFREQUENCYNVPROC) (void);
-typedef EGLuint64NV (EGLAPIENTRYP PFNEGLGETSYSTEMTIMENVPROC) (void);
+EGLAPI EGLSyncKHR EGLAPIENTRY eglCreateStreamSyncNV (EGLDisplay dpy, EGLStreamKHR stream, EGLenum type, const EGLint *attrib_list);
 #endif
+#endif /* EGL_NV_stream_sync */
+
+#ifndef EGL_NV_sync
+#define EGL_NV_sync 1
+typedef void *EGLSyncNV;
+typedef khronos_utime_nanoseconds_t EGLTimeNV;
+#ifdef KHRONOS_SUPPORT_INT64
+#define EGL_SYNC_PRIOR_COMMANDS_COMPLETE_NV 0x30E6
+#define EGL_SYNC_STATUS_NV                0x30E7
+#define EGL_SIGNALED_NV                   0x30E8
+#define EGL_UNSIGNALED_NV                 0x30E9
+#define EGL_SYNC_FLUSH_COMMANDS_BIT_NV    0x0001
+#define EGL_FOREVER_NV                    0xFFFFFFFFFFFFFFFFull
+#define EGL_ALREADY_SIGNALED_NV           0x30EA
+#define EGL_TIMEOUT_EXPIRED_NV            0x30EB
+#define EGL_CONDITION_SATISFIED_NV        0x30EC
+#define EGL_SYNC_TYPE_NV                  0x30ED
+#define EGL_SYNC_CONDITION_NV             0x30EE
+#define EGL_SYNC_FENCE_NV                 0x30EF
+#define EGL_NO_SYNC_NV                    ((EGLSyncNV)0)
+typedef EGLSyncNV (EGLAPIENTRYP PFNEGLCREATEFENCESYNCNVPROC) (EGLDisplay dpy, EGLenum condition, const EGLint *attrib_list);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYSYNCNVPROC) (EGLSyncNV sync);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLFENCENVPROC) (EGLSyncNV sync);
+typedef EGLint (EGLAPIENTRYP PFNEGLCLIENTWAITSYNCNVPROC) (EGLSyncNV sync, EGLint flags, EGLTimeNV timeout);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLSIGNALSYNCNVPROC) (EGLSyncNV sync, EGLenum mode);
+typedef EGLBoolean (EGLAPIENTRYP PFNEGLGETSYNCATTRIBNVPROC) (EGLSyncNV sync, EGLint attribute, EGLint *value);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLSyncNV EGLAPIENTRY eglCreateFenceSyncNV (EGLDisplay dpy, EGLenum condition, const EGLint *attrib_list);
+EGLAPI EGLBoolean EGLAPIENTRY eglDestroySyncNV (EGLSyncNV sync);
+EGLAPI EGLBoolean EGLAPIENTRY eglFenceNV (EGLSyncNV sync);
+EGLAPI EGLint EGLAPIENTRY eglClientWaitSyncNV (EGLSyncNV sync, EGLint flags, EGLTimeNV timeout);
+EGLAPI EGLBoolean EGLAPIENTRY eglSignalSyncNV (EGLSyncNV sync, EGLenum mode);
+EGLAPI EGLBoolean EGLAPIENTRY eglGetSyncAttribNV (EGLSyncNV sync, EGLint attribute, EGLint *value);
 #endif
+#endif /* KHRONOS_SUPPORT_INT64 */
+#endif /* EGL_NV_sync */
 
-#ifndef EGL_EXT_create_context_robustness
-#define EGL_EXT_create_context_robustness 1
-#define EGL_CONTEXT_OPENGL_ROBUST_ACCESS_EXT	0x30BF
-#define EGL_CONTEXT_OPENGL_RESET_NOTIFICATION_STRATEGY_EXT 0x3138
-#define EGL_NO_RESET_NOTIFICATION_EXT		0x31BE
-#define EGL_LOSE_CONTEXT_ON_RESET_EXT		0x31BF
+#ifndef EGL_NV_system_time
+#define EGL_NV_system_time 1
+typedef khronos_utime_nanoseconds_t EGLuint64NV;
+#ifdef KHRONOS_SUPPORT_INT64
+typedef EGLuint64NV (EGLAPIENTRYP PFNEGLGETSYSTEMTIMEFREQUENCYNVPROC) (void);
+typedef EGLuint64NV (EGLAPIENTRYP PFNEGLGETSYSTEMTIMENVPROC) (void);
+#ifdef EGL_EGLEXT_PROTOTYPES
+EGLAPI EGLuint64NV EGLAPIENTRY eglGetSystemTimeFrequencyNV (void);
+EGLAPI EGLuint64NV EGLAPIENTRY eglGetSystemTimeNV (void);
 #endif
+#endif /* KHRONOS_SUPPORT_INT64 */
+#endif /* EGL_NV_system_time */
 
 #ifdef __cplusplus
 }
diff --git a/src/3rdparty/angle/include/EGL/eglplatform.h b/src/3rdparty/angle/include/EGL/eglplatform.h
index eb15ae569d..ea9f5778ee 100644
--- a/src/3rdparty/angle/include/EGL/eglplatform.h
+++ b/src/3rdparty/angle/include/EGL/eglplatform.h
@@ -2,7 +2,7 @@
 #define __eglplatform_h_
 
 /*
-** Copyright (c) 2007-2009 The Khronos Group Inc.
+** Copyright (c) 2007-2013 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -25,7 +25,7 @@
 */
 
 /* Platform-specific types and definitions for egl.h
- * $Revision: 12306 $ on $Date: 2010-08-25 09:51:28 -0700 (Wed, 25 Aug 2010) $
+ * $Revision: 23432 $ on $Date: 2013-10-09 00:57:24 -0700 (Wed, 09 Oct 2013) $
  *
  * Adopters may modify khrplatform.h and this file to suit their platform.
  * You are encouraged to submit all modifications to the Khronos group so that
@@ -67,11 +67,11 @@
  * implementations.
  */
 
-#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP) /* Windows Runtime */
+#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_PC_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP) /* Windows Runtime */
 
 struct IUnknown;
 
-typedef int       EGLNativeDisplayType;
+typedef IUnknown *EGLNativeDisplayType;
 typedef void     *EGLNativePixmapType;
 typedef IUnknown *EGLNativeWindowType;
 
@@ -91,13 +91,17 @@ typedef int   EGLNativeDisplayType;
 typedef void *EGLNativeWindowType;
 typedef void *EGLNativePixmapType;
 
-#elif defined(WL_EGL_PLATFORM)
+#elif defined(__ANDROID__) || defined(ANDROID)
 
-typedef struct wl_display     *EGLNativeDisplayType;
-typedef struct wl_egl_pixmap  *EGLNativePixmapType;
-typedef struct wl_egl_window  *EGLNativeWindowType;
+#include <android/native_window.h>
 
-#elif defined(__unix__) && !defined(ANDROID)
+struct egl_native_pixmap_t;
+
+typedef struct ANativeWindow*           EGLNativeWindowType;
+typedef struct egl_native_pixmap_t*     EGLNativePixmapType;
+typedef void*                           EGLNativeDisplayType;
+
+#elif defined(__unix__)
 
 /* X11 (tentative)  */
 #include <X11/Xlib.h>
@@ -107,14 +111,6 @@ typedef Display *EGLNativeDisplayType;
 typedef Pixmap   EGLNativePixmapType;
 typedef Window   EGLNativeWindowType;
 
-#elif defined(ANDROID)
-
-struct egl_native_pixmap_t;
-
-typedef struct ANativeWindow*           EGLNativeWindowType;
-typedef struct egl_native_pixmap_t*     EGLNativePixmapType;
-typedef void*                           EGLNativeDisplayType;
-
 #else
 #error "Platform not recognized"
 #endif
diff --git a/src/3rdparty/angle/include/GLES2/gl2.h b/src/3rdparty/angle/include/GLES2/gl2.h
index e1d3b87cc5..c2d8357268 100644
--- a/src/3rdparty/angle/include/GLES2/gl2.h
+++ b/src/3rdparty/angle/include/GLES2/gl2.h
@@ -1,7 +1,7 @@
 #ifndef __gl2_h_
 #define __gl2_h_
 
-/* $Revision: 10602 $ on $Date:: 2010-03-04 22:35:34 -0800 #$ */
+/* $Revision: 20555 $ on $Date:: 2013-02-12 14:32:47 -0800 #$ */
 
 #include <GLES2/gl2platform.h>
 
@@ -431,7 +431,6 @@ typedef khronos_ssize_t  GLsizeiptr;
 #define GL_RGB5_A1                        0x8057
 #define GL_RGB565                         0x8D62
 #define GL_DEPTH_COMPONENT16              0x81A5
-#define GL_STENCIL_INDEX                  0x1901
 #define GL_STENCIL_INDEX8                 0x8D48
 
 #define GL_RENDERBUFFER_WIDTH             0x8D42
@@ -528,7 +527,7 @@ GL_APICALL void         GL_APIENTRY glGenTextures (GLsizei n, GLuint* textures);
 GL_APICALL void         GL_APIENTRY glGetActiveAttrib (GLuint program, GLuint index, GLsizei bufsize, GLsizei* length, GLint* size, GLenum* type, GLchar* name);
 GL_APICALL void         GL_APIENTRY glGetActiveUniform (GLuint program, GLuint index, GLsizei bufsize, GLsizei* length, GLint* size, GLenum* type, GLchar* name);
 GL_APICALL void         GL_APIENTRY glGetAttachedShaders (GLuint program, GLsizei maxcount, GLsizei* count, GLuint* shaders);
-GL_APICALL int          GL_APIENTRY glGetAttribLocation (GLuint program, const GLchar* name);
+GL_APICALL GLint        GL_APIENTRY glGetAttribLocation (GLuint program, const GLchar* name);
 GL_APICALL void         GL_APIENTRY glGetBooleanv (GLenum pname, GLboolean* params);
 GL_APICALL void         GL_APIENTRY glGetBufferParameteriv (GLenum target, GLenum pname, GLint* params);
 GL_APICALL GLenum       GL_APIENTRY glGetError (void);
@@ -547,7 +546,7 @@ GL_APICALL void         GL_APIENTRY glGetTexParameterfv (GLenum target, GLenum p
 GL_APICALL void         GL_APIENTRY glGetTexParameteriv (GLenum target, GLenum pname, GLint* params);
 GL_APICALL void         GL_APIENTRY glGetUniformfv (GLuint program, GLint location, GLfloat* params);
 GL_APICALL void         GL_APIENTRY glGetUniformiv (GLuint program, GLint location, GLint* params);
-GL_APICALL int          GL_APIENTRY glGetUniformLocation (GLuint program, const GLchar* name);
+GL_APICALL GLint        GL_APIENTRY glGetUniformLocation (GLuint program, const GLchar* name);
 GL_APICALL void         GL_APIENTRY glGetVertexAttribfv (GLuint index, GLenum pname, GLfloat* params);
 GL_APICALL void         GL_APIENTRY glGetVertexAttribiv (GLuint index, GLenum pname, GLint* params);
 GL_APICALL void         GL_APIENTRY glGetVertexAttribPointerv (GLuint index, GLenum pname, GLvoid** pointer);
@@ -569,7 +568,7 @@ GL_APICALL void         GL_APIENTRY glRenderbufferStorage (GLenum target, GLenum
 GL_APICALL void         GL_APIENTRY glSampleCoverage (GLclampf value, GLboolean invert);
 GL_APICALL void         GL_APIENTRY glScissor (GLint x, GLint y, GLsizei width, GLsizei height);
 GL_APICALL void         GL_APIENTRY glShaderBinary (GLsizei n, const GLuint* shaders, GLenum binaryformat, const GLvoid* binary, GLsizei length);
-GL_APICALL void         GL_APIENTRY glShaderSource (GLuint shader, GLsizei count, const GLchar** string, const GLint* length);
+GL_APICALL void         GL_APIENTRY glShaderSource (GLuint shader, GLsizei count, const GLchar* const* string, const GLint* length);
 GL_APICALL void         GL_APIENTRY glStencilFunc (GLenum func, GLint ref, GLuint mask);
 GL_APICALL void         GL_APIENTRY glStencilFuncSeparate (GLenum face, GLenum func, GLint ref, GLuint mask);
 GL_APICALL void         GL_APIENTRY glStencilMask (GLuint mask);
diff --git a/src/3rdparty/angle/include/GLES2/gl2ext.h b/src/3rdparty/angle/include/GLES2/gl2ext.h
index bad50f9ccb..d77fdbaebc 100644
--- a/src/3rdparty/angle/include/GLES2/gl2ext.h
+++ b/src/3rdparty/angle/include/GLES2/gl2ext.h
@@ -1,7 +1,7 @@
 #ifndef __gl2ext_h_
 #define __gl2ext_h_
 
-/* $Revision: 16482 $ on $Date:: 2012-01-04 13:44:55 -0500 #$ */
+/* $Revision: 20795 $ on $Date:: 2013-03-07 01:01:58 -0800 #$ */
 
 #ifdef __cplusplus
 extern "C" {
@@ -93,6 +93,25 @@ typedef void* GLeglImageOES;
 #define GL_DEPTH24_STENCIL8_OES                                 0x88F0
 #endif
 
+/* GL_OES_required_internalformat */
+#ifndef GL_OES_required_internalformat 
+#define GL_ALPHA8_OES                                           0x803C
+#define GL_DEPTH_COMPONENT16_OES                                0x81A5
+/* reuse GL_DEPTH_COMPONENT24_OES */                            
+/* reuse GL_DEPTH24_STENCIL8_OES */                             
+/* reuse GL_DEPTH_COMPONENT32_OES */                            
+#define GL_LUMINANCE4_ALPHA4_OES                                0x8043
+#define GL_LUMINANCE8_ALPHA8_OES                                0x8045
+#define GL_LUMINANCE8_OES                                       0x8040
+#define GL_RGBA4_OES                                            0x8056
+#define GL_RGB5_A1_OES                                          0x8057
+#define GL_RGB565_OES                                           0x8D62
+/* reuse GL_RGB8_OES */                              
+/* reuse GL_RGBA8_OES */  
+/* reuse GL_RGB10_EXT */
+/* reuse GL_RGB10_A2_EXT */
+#endif 
+
 /* GL_OES_rgb8_rgba8 */
 #ifndef GL_OES_rgb8_rgba8
 #define GL_RGB8_OES                                             0x8051
@@ -114,6 +133,10 @@ typedef void* GLeglImageOES;
 #define GL_STENCIL_INDEX4_OES                                   0x8D47
 #endif
 
+#ifndef GL_OES_surfaceless_context
+#define GL_FRAMEBUFFER_UNDEFINED_OES                            0x8219
+#endif
+
 /* GL_OES_texture_3D */
 #ifndef GL_OES_texture_3D
 #define GL_TEXTURE_WRAP_R_OES                                   0x8072
@@ -156,6 +179,85 @@ typedef void* GLeglImageOES;
 #endif
 
 /*------------------------------------------------------------------------*
+ * KHR extension tokens
+ *------------------------------------------------------------------------*/
+
+#ifndef GL_KHR_debug
+typedef void (GL_APIENTRYP GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
+#define GL_DEBUG_OUTPUT_SYNCHRONOUS                             0x8242
+#define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH                     0x8243
+#define GL_DEBUG_CALLBACK_FUNCTION                              0x8244
+#define GL_DEBUG_CALLBACK_USER_PARAM                            0x8245
+#define GL_DEBUG_SOURCE_API                                     0x8246
+#define GL_DEBUG_SOURCE_WINDOW_SYSTEM                           0x8247
+#define GL_DEBUG_SOURCE_SHADER_COMPILER                         0x8248
+#define GL_DEBUG_SOURCE_THIRD_PARTY                             0x8249
+#define GL_DEBUG_SOURCE_APPLICATION                             0x824A
+#define GL_DEBUG_SOURCE_OTHER                                   0x824B
+#define GL_DEBUG_TYPE_ERROR                                     0x824C
+#define GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR                       0x824D
+#define GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR                        0x824E
+#define GL_DEBUG_TYPE_PORTABILITY                               0x824F
+#define GL_DEBUG_TYPE_PERFORMANCE                               0x8250
+#define GL_DEBUG_TYPE_OTHER                                     0x8251
+#define GL_DEBUG_TYPE_MARKER                                    0x8268
+#define GL_DEBUG_TYPE_PUSH_GROUP                                0x8269
+#define GL_DEBUG_TYPE_POP_GROUP                                 0x826A
+#define GL_DEBUG_SEVERITY_NOTIFICATION                          0x826B
+#define GL_MAX_DEBUG_GROUP_STACK_DEPTH                          0x826C
+#define GL_DEBUG_GROUP_STACK_DEPTH                              0x826D
+#define GL_BUFFER                                               0x82E0
+#define GL_SHADER                                               0x82E1
+#define GL_PROGRAM                                              0x82E2
+#define GL_QUERY                                                0x82E3
+/* PROGRAM_PIPELINE only in GL */                               
+#define GL_SAMPLER                                              0x82E6
+/* DISPLAY_LIST only in GL */                                   
+#define GL_MAX_LABEL_LENGTH                                     0x82E8
+#define GL_MAX_DEBUG_MESSAGE_LENGTH                             0x9143
+#define GL_MAX_DEBUG_LOGGED_MESSAGES                            0x9144
+#define GL_DEBUG_LOGGED_MESSAGES                                0x9145
+#define GL_DEBUG_SEVERITY_HIGH                                  0x9146
+#define GL_DEBUG_SEVERITY_MEDIUM                                0x9147
+#define GL_DEBUG_SEVERITY_LOW                                   0x9148
+#define GL_DEBUG_OUTPUT                                         0x92E0
+#define GL_CONTEXT_FLAG_DEBUG_BIT                               0x00000002
+#define GL_STACK_OVERFLOW                                       0x0503
+#define GL_STACK_UNDERFLOW                                      0x0504
+#endif
+
+#ifndef GL_KHR_texture_compression_astc_ldr
+#define GL_COMPRESSED_RGBA_ASTC_4x4_KHR                         0x93B0
+#define GL_COMPRESSED_RGBA_ASTC_5x4_KHR                         0x93B1
+#define GL_COMPRESSED_RGBA_ASTC_5x5_KHR                         0x93B2
+#define GL_COMPRESSED_RGBA_ASTC_6x5_KHR                         0x93B3
+#define GL_COMPRESSED_RGBA_ASTC_6x6_KHR                         0x93B4
+#define GL_COMPRESSED_RGBA_ASTC_8x5_KHR                         0x93B5
+#define GL_COMPRESSED_RGBA_ASTC_8x6_KHR                         0x93B6
+#define GL_COMPRESSED_RGBA_ASTC_8x8_KHR                         0x93B7
+#define GL_COMPRESSED_RGBA_ASTC_10x5_KHR                        0x93B8
+#define GL_COMPRESSED_RGBA_ASTC_10x6_KHR                        0x93B9
+#define GL_COMPRESSED_RGBA_ASTC_10x8_KHR                        0x93BA
+#define GL_COMPRESSED_RGBA_ASTC_10x10_KHR                       0x93BB
+#define GL_COMPRESSED_RGBA_ASTC_12x10_KHR                       0x93BC
+#define GL_COMPRESSED_RGBA_ASTC_12x12_KHR                       0x93BD
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4_KHR                 0x93D0
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x4_KHR                 0x93D1
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5_KHR                 0x93D2
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x5_KHR                 0x93D3
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6_KHR                 0x93D4
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x5_KHR                 0x93D5
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x6_KHR                 0x93D6
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x8_KHR                 0x93D7
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x5_KHR                0x93D8
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x6_KHR                0x93D9
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x8_KHR                0x93DA
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x10_KHR               0x93DB
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x10_KHR               0x93DC
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x12_KHR               0x93DD
+#endif
+
+/*------------------------------------------------------------------------*
  * AMD extension tokens
  *------------------------------------------------------------------------*/
 
@@ -192,6 +294,18 @@ typedef void* GLeglImageOES;
  * ANGLE extension tokens
  *------------------------------------------------------------------------*/
 
+/* GL_ANGLE_depth_texture */
+#ifndef GL_ANGLE_depth_texture
+#define GL_DEPTH_COMPONENT                                      0x1902
+#define GL_DEPTH_STENCIL_OES                                    0x84F9
+#define GL_UNSIGNED_SHORT                                       0x1403
+#define GL_UNSIGNED_INT                                         0x1405
+#define GL_UNSIGNED_INT_24_8_OES                                0x84FA
+#define GL_DEPTH_COMPONENT16                                    0x81A5
+#define GL_DEPTH_COMPONENT32_OES                                0x81A7
+#define GL_DEPTH24_STENCIL8_OES                                 0x88F0
+#endif
+
 /* GL_ANGLE_framebuffer_blit */
 #ifndef GL_ANGLE_framebuffer_blit
 #define GL_READ_FRAMEBUFFER_ANGLE                               0x8CA8
@@ -207,53 +321,49 @@ typedef void* GLeglImageOES;
 #define GL_MAX_SAMPLES_ANGLE                                    0x8D57
 #endif
 
+/* GL_ANGLE_instanced_arrays */
+#ifndef GL_ANGLE_instanced_arrays 
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE                    0x88FE
+#endif
+
 /* GL_ANGLE_pack_reverse_row_order */
-#ifndef GL_ANGLE_pack_reverse_row_order
+#ifndef GL_ANGLE_pack_reverse_row_order 
 #define GL_PACK_REVERSE_ROW_ORDER_ANGLE                         0x93A4
 #endif
 
+/* GL_ANGLE_program_binary */
+#ifndef GL_ANGLE_program_binary
+#define GL_PROGRAM_BINARY_ANGLE                                 0x93A6
+#endif
+
 /* GL_ANGLE_texture_compression_dxt3 */
-#ifndef GL_ANGLE_texture_compression_dxt3
+#ifndef GL_ANGLE_texture_compression_dxt3 
 #define GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE                      0x83F2
 #endif
 
 /* GL_ANGLE_texture_compression_dxt5 */
-#ifndef GL_ANGLE_texture_compression_dxt5
+#ifndef GL_ANGLE_texture_compression_dxt5 
 #define GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE                      0x83F3
 #endif
 
-/* GL_ANGLE_translated_shader_source */
-#ifndef GL_ANGLE_translated_shader_source
-#define GL_TRANSLATED_SHADER_SOURCE_LENGTH_ANGLE                0x93A0
-#endif
-
 /* GL_ANGLE_texture_usage */
-#ifndef GL_ANGLE_texture_usage
+#ifndef GL_ANGLE_texture_usage 
 #define GL_TEXTURE_USAGE_ANGLE                                  0x93A2
 #define GL_FRAMEBUFFER_ATTACHMENT_ANGLE                         0x93A3
 #endif
 
-/* GL_ANGLE_instanced_arrays */
-#ifndef GL_ANGLE_instanced_arrays
-#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE                    0x88FE
-#endif
-
-/* GL_ANGLE_program_binary */
-#ifndef GL_ANGLE_program_binary
-#define GL_PROGRAM_BINARY_ANGLE                                 0x93A6
+/* GL_ANGLE_translated_shader_source */
+#ifndef GL_ANGLE_translated_shader_source 
+#define GL_TRANSLATED_SHADER_SOURCE_LENGTH_ANGLE                0x93A0
 #endif
 
 /*------------------------------------------------------------------------*
  * APPLE extension tokens
  *------------------------------------------------------------------------*/
 
-/* GL_APPLE_rgb_422 */
-#ifndef GL_APPLE_rgb_422
-#define GL_RGB_422_APPLE                                        0x8A1F
-#define GL_UNSIGNED_SHORT_8_8_APPLE                             0x85BA
-#define GL_UNSIGNED_SHORT_8_8_REV_APPLE                         0x85BB
-#endif
-
+/* GL_APPLE_copy_texture_levels */
+/* No new tokens introduced by this extension. */
+    
 /* GL_APPLE_framebuffer_multisample */
 #ifndef GL_APPLE_framebuffer_multisample
 #define GL_RENDERBUFFER_SAMPLES_APPLE                           0x8CAB
@@ -265,6 +375,47 @@ typedef void* GLeglImageOES;
 #define GL_READ_FRAMEBUFFER_BINDING_APPLE                       0x8CAA
 #endif
 
+/* GL_APPLE_rgb_422 */
+#ifndef GL_APPLE_rgb_422
+#define GL_RGB_422_APPLE                                        0x8A1F
+#define GL_UNSIGNED_SHORT_8_8_APPLE                             0x85BA
+#define GL_UNSIGNED_SHORT_8_8_REV_APPLE                         0x85BB
+#endif
+
+/* GL_APPLE_sync */
+#ifndef GL_APPLE_sync
+
+#ifndef __gl3_h_
+/* These types are defined with reference to <inttypes.h>
+ * in the Apple extension spec, but here we use the Khronos
+ * portable types in khrplatform.h, and assume those types 
+ * are always defined.
+ * If any other extensions using these types are defined, 
+ * the typedefs must move out of this block and be shared.
+ */
+typedef khronos_int64_t GLint64;
+typedef khronos_uint64_t GLuint64;
+typedef struct __GLsync *GLsync;
+#endif
+
+#define GL_SYNC_OBJECT_APPLE                                    0x8A53
+#define GL_MAX_SERVER_WAIT_TIMEOUT_APPLE                        0x9111
+#define GL_OBJECT_TYPE_APPLE                                    0x9112
+#define GL_SYNC_CONDITION_APPLE                                 0x9113
+#define GL_SYNC_STATUS_APPLE                                    0x9114
+#define GL_SYNC_FLAGS_APPLE                                     0x9115
+#define GL_SYNC_FENCE_APPLE                                     0x9116
+#define GL_SYNC_GPU_COMMANDS_COMPLETE_APPLE                     0x9117
+#define GL_UNSIGNALED_APPLE                                     0x9118
+#define GL_SIGNALED_APPLE                                       0x9119
+#define GL_ALREADY_SIGNALED_APPLE                               0x911A
+#define GL_TIMEOUT_EXPIRED_APPLE                                0x911B
+#define GL_CONDITION_SATISFIED_APPLE                            0x911C
+#define GL_WAIT_FAILED_APPLE                                    0x911D
+#define GL_SYNC_FLUSH_COMMANDS_BIT_APPLE                        0x00000001
+#define GL_TIMEOUT_IGNORED_APPLE                                0xFFFFFFFFFFFFFFFFull
+#endif
+
 /* GL_APPLE_texture_format_BGRA8888 */
 #ifndef GL_APPLE_texture_format_BGRA8888
 #define GL_BGRA_EXT                                             0x80E1
@@ -279,6 +430,11 @@ typedef void* GLeglImageOES;
  * ARM extension tokens
  *------------------------------------------------------------------------*/
 
+/* GL_ARM_mali_program_binary */
+#ifndef GL_ARM_mali_program_binary
+#define GL_MALI_PROGRAM_BINARY_ARM                              0x8F61
+#endif
+
 /* GL_ARM_mali_shader_binary */
 #ifndef GL_ARM_mali_shader_binary
 #define GL_MALI_SHADER_BINARY_ARM                               0x8F60
@@ -327,12 +483,32 @@ typedef void* GLeglImageOES;
 #define GL_STENCIL_EXT                                          0x1802
 #endif
 
+/* GL_EXT_map_buffer_range */
+#ifndef GL_EXT_map_buffer_range
+#define GL_MAP_READ_BIT_EXT                                     0x0001
+#define GL_MAP_WRITE_BIT_EXT                                    0x0002
+#define GL_MAP_INVALIDATE_RANGE_BIT_EXT                         0x0004
+#define GL_MAP_INVALIDATE_BUFFER_BIT_EXT                        0x0008
+#define GL_MAP_FLUSH_EXPLICIT_BIT_EXT                           0x0010
+#define GL_MAP_UNSYNCHRONIZED_BIT_EXT                           0x0020
+#endif
+
 /* GL_EXT_multisampled_render_to_texture */
 #ifndef GL_EXT_multisampled_render_to_texture
 #define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_SAMPLES_EXT           0x8D6C
-#define GL_RENDERBUFFER_SAMPLES_EXT                             0x9133
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT               0x9134
-#define GL_MAX_SAMPLES_EXT                                      0x9135
+/* reuse values from GL_EXT_framebuffer_multisample (desktop extension) */ 
+#define GL_RENDERBUFFER_SAMPLES_EXT                             0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT               0x8D56
+#define GL_MAX_SAMPLES_EXT                                      0x8D57
+#endif
+
+/* GL_EXT_multiview_draw_buffers */
+#ifndef GL_EXT_multiview_draw_buffers
+#define GL_COLOR_ATTACHMENT_EXT                                 0x90F0
+#define GL_MULTIVIEW_EXT                                        0x90F1
+#define GL_DRAW_BUFFER_EXT                                      0x0C01
+#define GL_READ_BUFFER_EXT                                      0x0C02
+#define GL_MAX_MULTIVIEW_BUFFERS_EXT                            0x90F2
 #endif
 
 /* GL_EXT_multi_draw_arrays */
@@ -376,6 +552,11 @@ typedef void* GLeglImageOES;
 #define GL_PROGRAM_PIPELINE_BINDING_EXT                         0x825A
 #endif
 
+/* GL_EXT_shader_framebuffer_fetch */
+#ifndef GL_EXT_shader_framebuffer_fetch
+#define GL_FRAGMENT_SHADER_DISCARDS_SAMPLES_EXT                 0x8A52
+#endif
+
 /* GL_EXT_shader_texture_lod */
 /* No new tokens introduced by this extension. */
 
@@ -384,6 +565,7 @@ typedef void* GLeglImageOES;
 #define GL_TEXTURE_COMPARE_MODE_EXT                             0x884C
 #define GL_TEXTURE_COMPARE_FUNC_EXT                             0x884D
 #define GL_COMPARE_REF_TO_TEXTURE_EXT                           0x884E
+#define GL_SAMPLER_2D_SHADOW_EXT                                0x8B62
 #endif
 
 /* GL_EXT_sRGB */
@@ -431,13 +613,19 @@ typedef void* GLeglImageOES;
 #define GL_LUMINANCE32F_EXT                                     0x8818
 #define GL_LUMINANCE_ALPHA32F_EXT                               0x8819
 /* reuse GL_RGBA16F_EXT */
-#define GL_RGB16F_EXT                                           0x881B
+/* reuse GL_RGB16F_EXT */
 #define GL_ALPHA16F_EXT                                         0x881C
 #define GL_LUMINANCE16F_EXT                                     0x881E
 #define GL_LUMINANCE_ALPHA16F_EXT                               0x881F
 #define GL_RGB10_A2_EXT                                         0x8059  
 #define GL_RGB10_EXT                                            0x8052
 #define GL_BGRA8_EXT                                            0x93A1
+#define GL_R8_EXT                                               0x8229
+#define GL_RG8_EXT                                              0x822B
+#define GL_R32F_EXT                                             0x822E  
+#define GL_RG32F_EXT                                            0x8230
+#define GL_R16F_EXT                                             0x822D
+#define GL_RG16F_EXT                                            0x822F
 #endif
 
 /* GL_EXT_texture_type_2_10_10_10_REV */
@@ -447,9 +635,9 @@ typedef void* GLeglImageOES;
 
 /* GL_EXT_unpack_subimage */
 #ifndef GL_EXT_unpack_subimage
-#define GL_UNPACK_ROW_LENGTH                                    0x0CF2
-#define GL_UNPACK_SKIP_ROWS                                     0x0CF3
-#define GL_UNPACK_SKIP_PIXELS                                   0x0CF4
+#define GL_UNPACK_ROW_LENGTH_EXT                                0x0CF2
+#define GL_UNPACK_SKIP_ROWS_EXT                                 0x0CF3
+#define GL_UNPACK_SKIP_PIXELS_EXT                               0x0CF4
 #endif
 
 /*------------------------------------------------------------------------*
@@ -462,6 +650,15 @@ typedef void* GLeglImageOES;
 #endif
 
 /*------------------------------------------------------------------------*
+ * FJ extension tokens
+ *------------------------------------------------------------------------*/
+
+/* GL_FJ_shader_binary_GCCSO */
+#ifndef GL_FJ_shader_binary_GCCSO
+#define GL_GCCSO_SHADER_BINARY_F                                0x9260
+#endif
+
+/*------------------------------------------------------------------------*
  * IMG extension tokens
  *------------------------------------------------------------------------*/
 
@@ -489,6 +686,12 @@ typedef void* GLeglImageOES;
 #define GL_COMPRESSED_RGBA_PVRTC_2BPPV1_IMG                     0x8C03
 #endif
 
+/* GL_IMG_texture_compression_pvrtc2 */
+#ifndef GL_IMG_texture_compression_pvrtc2
+#define GL_COMPRESSED_RGBA_PVRTC_2BPPV2_IMG                     0x9137
+#define GL_COMPRESSED_RGBA_PVRTC_4BPPV2_IMG                     0x9138
+#endif
+
 /* GL_IMG_multisampled_render_to_texture */
 #ifndef GL_IMG_multisampled_render_to_texture
 #define GL_RENDERBUFFER_SAMPLES_IMG                             0x9133
@@ -594,6 +797,9 @@ typedef void* GLeglImageOES;
 #define GL_MAX_COLOR_ATTACHMENTS_EXT                             0x8CDF
 #endif
 
+/* GL_NV_draw_instanced */
+/* No new tokens introduced by this extension. */
+
 /* GL_NV_fbo_color_attachments */
 #ifndef GL_NV_fbo_color_attachments
 #define GL_MAX_COLOR_ATTACHMENTS_NV                             0x8CDF
@@ -607,6 +813,29 @@ typedef void* GLeglImageOES;
 #define GL_FENCE_CONDITION_NV                                   0x84F4
 #endif
 
+/* GL_NV_framebuffer_blit */
+#ifndef GL_NV_framebuffer_blit
+#define GL_READ_FRAMEBUFFER_NV                                  0x8CA8
+#define GL_DRAW_FRAMEBUFFER_NV                                  0x8CA9
+#define GL_DRAW_FRAMEBUFFER_BINDING_NV                          0x8CA6 
+#define GL_READ_FRAMEBUFFER_BINDING_NV                          0x8CAA
+#endif
+
+/* GL_NV_framebuffer_multisample */
+#ifndef GL_NV_framebuffer_multisample
+#define GL_RENDERBUFFER_SAMPLES_NV                              0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_NV                0x8D56
+#define GL_MAX_SAMPLES_NV                                       0x8D57
+#endif
+
+/* GL_NV_generate_mipmap_sRGB */
+/* No new tokens introduced by this extension. */
+
+/* GL_NV_instanced_arrays */
+#ifndef GL_NV_instanced_arrays
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_NV                       0x88FE
+#endif
+
 /* GL_NV_read_buffer */
 #ifndef GL_NV_read_buffer
 #define GL_READ_BUFFER_NV                                       0x0C02
@@ -624,6 +853,36 @@ typedef void* GLeglImageOES;
 /* GL_NV_read_stencil */
 /* No new tokens introduced by this extension. */
 
+/* GL_NV_shadow_samplers_array */
+#ifndef GL_NV_shadow_samplers_array
+#define GL_SAMPLER_2D_ARRAY_SHADOW_NV                           0x8DC4
+#endif                                             
+                                                   
+/* GL_NV_shadow_samplers_cube */
+#ifndef GL_NV_shadow_samplers_cube                 
+#define GL_SAMPLER_CUBE_SHADOW_NV                               0x8DC5
+#endif
+
+/* GL_NV_sRGB_formats */
+#ifndef GL_NV_sRGB_formats
+#define GL_SLUMINANCE_NV                                        0x8C46
+#define GL_SLUMINANCE_ALPHA_NV                                  0x8C44
+#define GL_SRGB8_NV                                             0x8C41
+#define GL_SLUMINANCE8_NV                                       0x8C47
+#define GL_SLUMINANCE8_ALPHA8_NV                                0x8C45
+#define GL_COMPRESSED_SRGB_S3TC_DXT1_NV                         0x8C4C
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT1_NV                   0x8C4D
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT3_NV                   0x8C4E
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT5_NV                   0x8C4F
+#define GL_ETC1_SRGB8_NV                                        0x88EE
+#endif
+
+/* GL_NV_texture_border_clamp */
+#ifndef GL_NV_texture_border_clamp
+#define GL_TEXTURE_BORDER_COLOR_NV                              0x1004
+#define GL_CLAMP_TO_BORDER_NV                                   0x812D
+#endif
+
 /* GL_NV_texture_compression_s3tc_update */
 /* No new tokens introduced by this extension. */
 
@@ -641,6 +900,14 @@ typedef void* GLeglImageOES;
 #define GL_ALPHA_TEST_REF_QCOM                                  0x0BC2
 #endif
 
+/* GL_QCOM_binning_control */
+#ifndef GL_QCOM_binning_control
+#define GL_BINNING_CONTROL_HINT_QCOM                            0x8FB0
+#define GL_CPU_OPTIMIZED_QCOM                                   0x8FB1
+#define GL_GPU_OPTIMIZED_QCOM                                   0x8FB2
+#define GL_RENDER_DIRECT_TO_FRAMEBUFFER_QCOM                    0x8FB3
+#endif
+
 /* GL_QCOM_driver_control */
 /* No new tokens introduced by this extension. */
 
@@ -811,6 +1078,11 @@ typedef void (GL_APIENTRYP PFNGLGETBUFFERPOINTERVOESPROC) (GLenum target, GLenum
 #define GL_OES_packed_depth_stencil 1
 #endif
 
+/* GL_OES_required_internalformat */
+#ifndef GL_OES_required_internalformat
+#define GL_OES_required_internalformat 1
+#endif
+
 /* GL_OES_rgb8_rgba8 */
 #ifndef GL_OES_rgb8_rgba8
 #define GL_OES_rgb8_rgba8 1
@@ -831,6 +1103,10 @@ typedef void (GL_APIENTRYP PFNGLGETBUFFERPOINTERVOESPROC) (GLenum target, GLenum
 #define GL_OES_stencil4 1
 #endif
 
+#ifndef GL_OES_surfaceless_context
+#define GL_OES_surfaceless_context 1
+#endif
+
 /* GL_OES_texture_3D */
 #ifndef GL_OES_texture_3D
 #define GL_OES_texture_3D 1
@@ -901,6 +1177,43 @@ typedef GLboolean (GL_APIENTRYP PFNGLISVERTEXARRAYOESPROC) (GLuint array);
 #endif
 
 /*------------------------------------------------------------------------*
+ * KHR extension functions
+ *------------------------------------------------------------------------*/
+
+#ifndef GL_KHR_debug
+#define GL_KHR_debug 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDebugMessageControl (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+GL_APICALL void GL_APIENTRY glDebugMessageInsert (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+GL_APICALL void GL_APIENTRY glDebugMessageCallback (GLDEBUGPROC callback, const void *userParam);
+GL_APICALL GLuint GL_APIENTRY glGetDebugMessageLog (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+GL_APICALL void GL_APIENTRY glPushDebugGroup (GLenum source, GLuint id, GLsizei length, const GLchar *message);
+GL_APICALL void GL_APIENTRY glPopDebugGroup (void);
+GL_APICALL void GL_APIENTRY glObjectLabel (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
+GL_APICALL void GL_APIENTRY glGetObjectLabel (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
+GL_APICALL void GL_APIENTRY glObjectPtrLabel (const void *ptr, GLsizei length, const GLchar *label);
+GL_APICALL void GL_APIENTRY glGetObjectPtrLabel (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
+GL_APICALL void GL_APIENTRY glGetPointerv (GLenum pname, void **params);
+#endif 
+typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGECONTROLPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGEINSERTPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGECALLBACKPROC) (GLDEBUGPROC callback, const void *userParam);
+typedef GLuint (GL_APIENTRYP PFNGLGETDEBUGMESSAGELOGPROC) (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+typedef void (GL_APIENTRYP PFNGLPUSHDEBUGGROUPPROC) (GLenum source, GLuint id, GLsizei length, const GLchar *message);
+typedef void (GL_APIENTRYP PFNGLPOPDEBUGGROUPPROC) (void);
+typedef void (GL_APIENTRYP PFNGLOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
+typedef void (GL_APIENTRYP PFNGLOBJECTPTRLABELPROC) (const void *ptr, GLsizei length, const GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETOBJECTPTRLABELPROC) (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETPOINTERVPROC) (GLenum pname, void **params);
+#endif
+
+#ifndef GL_KHR_texture_compression_astc_ldr
+#define GL_KHR_texture_compression_astc_ldr 1
+#endif
+
+
+/*------------------------------------------------------------------------*
  * AMD extension functions
  *------------------------------------------------------------------------*/
 
@@ -952,6 +1265,11 @@ typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERDATAAMDPROC) (GLuint monito
  * ANGLE extension functions
  *------------------------------------------------------------------------*/
 
+/* GL_ANGLE_depth_texture */
+#ifndef GL_ANGLE_depth_texture
+#define GL_ANGLE_depth_texture 1
+#endif
+
 /* GL_ANGLE_framebuffer_blit */
 #ifndef GL_ANGLE_framebuffer_blit
 #define GL_ANGLE_framebuffer_blit 1
@@ -970,55 +1288,62 @@ GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleANGLE (GLenum target
 typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEANGLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 #endif
 
+#ifndef GL_ANGLE_instanced_arrays 
+#define GL_ANGLE_instanced_arrays 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDrawArraysInstancedANGLE (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glDrawElementsInstancedANGLE (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glVertexAttribDivisorANGLE (GLuint index, GLuint divisor);
+#endif
+typedef void (GL_APIENTRYP PFNGLDRAWARRAYSINSTANCEDANGLEPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLDRAWELEMENTSINSTANCEDANGLEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLVERTEXATTRIBDIVISORANGLEPROC) (GLuint index, GLuint divisor);
+#endif
+
 /* GL_ANGLE_pack_reverse_row_order */
-#ifndef GL_ANGLE_pack_reverse_row_order
+#ifndef GL_ANGLE_pack_reverse_row_order 
 #define GL_ANGLE_pack_reverse_row_order 1
 #endif
 
+/* GL_ANGLE_program_binary */
+#ifndef GL_ANGLE_program_binary
+#define GL_ANGLE_program_binary 1
+#endif
+
 /* GL_ANGLE_texture_compression_dxt3 */
-#ifndef GL_ANGLE_texture_compression_dxt3
+#ifndef GL_ANGLE_texture_compression_dxt3 
 #define GL_ANGLE_texture_compression_dxt3 1
 #endif
 
 /* GL_ANGLE_texture_compression_dxt5 */
-#ifndef GL_ANGLE_texture_compression_dxt5
+#ifndef GL_ANGLE_texture_compression_dxt5 
 #define GL_ANGLE_texture_compression_dxt5 1
 #endif
 
-/* GL_ANGLE_translated_shader_source */
-#ifndef GL_ANGLE_translated_shader_source
-#define GL_ANGLE_translated_shader_source 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glGetTranslatedShaderSourceANGLE (GLuint shader, GLsizei bufsize, GLsizei* length, GLchar* source);
-#endif
-typedef void (GL_APIENTRYP PFNGLGETTRANSLATEDSHADERSOURCEANGLEPROC) (GLuint shader, GLsizei bufsize, GLsizei* length, GLchar* source);
-#endif
-
 /* GL_ANGLE_texture_usage */
-#ifndef GL_ANGLE_texture_usage
+#ifndef GL_ANGLE_texture_usage 
 #define GL_ANGLE_texture_usage 1
 #endif
 
-/* GL_ANGLE_instanced_arrays */
-#ifndef GL_ANGLE_instanced_arrays
-#define GL_ANGLE_instanced_arrays 1
+#ifndef GL_ANGLE_translated_shader_source 
+#define GL_ANGLE_translated_shader_source 1
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glVertexAttribDivisorANGLE(GLuint index, GLuint divisor);
-GL_APICALL void GL_APIENTRY glDrawArraysInstancedANGLE(GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-GL_APICALL void GL_APIENTRY glDrawElementsInstancedANGLE(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glGetTranslatedShaderSourceANGLE (GLuint shader, GLsizei bufsize, GLsizei *length, GLchar *source);
 #endif
-typedef void (GL_APIENTRYP PFNGLVERTEXATTRIBDIVISORANGLEPROC) (GLuint index, GLuint divisor);
-typedef void (GL_APIENTRYP PFNGLDRAWARRAYSINSTANCEDANGLEPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-typedef void (GL_APIENTRYP PFNGLDRAWELEMENTSINSTANCEDANGLEPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLGETTRANSLATEDSHADERSOURCEANGLEPROC) (GLuint shader, GLsizei bufsize, GLsizei *length, GLchar *source);
 #endif
 
 /*------------------------------------------------------------------------*
  * APPLE extension functions
  *------------------------------------------------------------------------*/
 
-/* GL_APPLE_rgb_422 */
-#ifndef GL_APPLE_rgb_422
-#define GL_APPLE_rgb_422 1
+/* GL_APPLE_copy_texture_levels */
+#ifndef GL_APPLE_copy_texture_levels
+#define GL_APPLE_copy_texture_levels 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glCopyTextureLevelsAPPLE (GLuint destinationTexture, GLuint sourceTexture, GLint sourceBaseLevel, GLsizei sourceLevelCount);
+#endif
+typedef void (GL_APIENTRYP PFNGLCOPYTEXTURELEVELSAPPLEPROC) (GLuint destinationTexture, GLuint sourceTexture, GLint sourceBaseLevel, GLsizei sourceLevelCount);
 #endif
 
 /* GL_APPLE_framebuffer_multisample */
@@ -1032,6 +1357,32 @@ typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEAPPLEPROC) (GLenum
 typedef void (GL_APIENTRYP PFNGLRESOLVEMULTISAMPLEFRAMEBUFFERAPPLEPROC) (void);
 #endif
 
+/* GL_APPLE_rgb_422 */
+#ifndef GL_APPLE_rgb_422
+#define GL_APPLE_rgb_422 1
+#endif
+
+/* GL_APPLE_sync */
+#ifndef GL_APPLE_sync
+#define GL_APPLE_sync 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL GLsync GL_APIENTRY glFenceSyncAPPLE (GLenum condition, GLbitfield flags);
+GL_APICALL GLboolean GL_APIENTRY glIsSyncAPPLE (GLsync sync);
+GL_APICALL void GL_APIENTRY glDeleteSyncAPPLE (GLsync sync);
+GL_APICALL GLenum GL_APIENTRY glClientWaitSyncAPPLE (GLsync sync, GLbitfield flags, GLuint64 timeout);
+GL_APICALL void GL_APIENTRY glWaitSyncAPPLE (GLsync sync, GLbitfield flags, GLuint64 timeout);
+GL_APICALL void GL_APIENTRY glGetInteger64vAPPLE (GLenum pname, GLint64 *params);
+GL_APICALL void GL_APIENTRY glGetSyncivAPPLE (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
+#endif
+typedef GLsync (GL_APIENTRYP PFNGLFENCESYNCAPPLEPROC) (GLenum condition, GLbitfield flags);
+typedef GLboolean (GL_APIENTRYP PFNGLISSYNCAPPLEPROC) (GLsync sync);
+typedef void (GL_APIENTRYP PFNGLDELETESYNCAPPLEPROC) (GLsync sync);
+typedef GLenum (GL_APIENTRYP PFNGLCLIENTWAITSYNCAPPLEPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
+typedef void (GL_APIENTRYP PFNGLWAITSYNCAPPLEPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
+typedef void (GL_APIENTRYP PFNGLGETINTEGER64VAPPLEPROC) (GLenum pname, GLint64 *params);
+typedef void (GL_APIENTRYP PFNGLGETSYNCIVAPPLEPROC) (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
+#endif
+
 /* GL_APPLE_texture_format_BGRA8888 */
 #ifndef GL_APPLE_texture_format_BGRA8888
 #define GL_APPLE_texture_format_BGRA8888 1
@@ -1046,6 +1397,11 @@ typedef void (GL_APIENTRYP PFNGLRESOLVEMULTISAMPLEFRAMEBUFFERAPPLEPROC) (void);
  * ARM extension functions
  *------------------------------------------------------------------------*/
 
+/* GL_ARM_mali_program_binary */
+#ifndef GL_ARM_mali_program_binary
+#define GL_ARM_mali_program_binary 1
+#endif
+
 /* GL_ARM_mali_shader_binary */
 #ifndef GL_ARM_mali_shader_binary
 #define GL_ARM_mali_shader_binary 1
@@ -1103,6 +1459,17 @@ GL_APICALL void GL_APIENTRY glDiscardFramebufferEXT (GLenum target, GLsizei numA
 typedef void (GL_APIENTRYP PFNGLDISCARDFRAMEBUFFEREXTPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments);
 #endif
 
+/* GL_EXT_map_buffer_range */
+#ifndef GL_EXT_map_buffer_range
+#define GL_EXT_map_buffer_range 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void* GL_APIENTRY glMapBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+GL_APICALL void GL_APIENTRY glFlushMappedBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length);
+#endif
+typedef void* (GL_APIENTRYP PFNGLMAPBUFFERRANGEEXTPROC) (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+typedef void (GL_APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEEXTPROC) (GLenum target, GLintptr offset, GLsizeiptr length);
+#endif
+
 /* GL_EXT_multisampled_render_to_texture */
 #ifndef GL_EXT_multisampled_render_to_texture
 #define GL_EXT_multisampled_render_to_texture 1
@@ -1114,10 +1481,23 @@ typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLenum t
 typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DMULTISAMPLEEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
 #endif
 
+/* GL_EXT_multiview_draw_buffers */
+#ifndef GL_EXT_multiview_draw_buffers
+#define GL_EXT_multiview_draw_buffers 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glReadBufferIndexedEXT (GLenum src, GLint index);
+GL_APICALL void GL_APIENTRY glDrawBuffersIndexedEXT (GLint n, const GLenum *location, const GLint *indices);
+GL_APICALL void GL_APIENTRY glGetIntegeri_vEXT (GLenum target, GLuint index, GLint *data);
+#endif
+typedef void (GL_APIENTRYP PFNGLREADBUFFERINDEXEDEXTPROC) (GLenum src, GLint index);
+typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSINDEXEDEXTPROC) (GLint n, const GLenum *location, const GLint *indices);
+typedef void (GL_APIENTRYP PFNGLGETINTEGERI_VEXTPROC) (GLenum target, GLuint index, GLint *data);
+#endif
+
 #ifndef GL_EXT_multi_draw_arrays
 #define GL_EXT_multi_draw_arrays 1
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glMultiDrawArraysEXT (GLenum, GLint *, GLsizei *, GLsizei);
+GL_APICALL void GL_APIENTRY glMultiDrawArraysEXT (GLenum, const GLint *, const GLsizei *, GLsizei);
 GL_APICALL void GL_APIENTRY glMultiDrawElementsEXT (GLenum, const GLsizei *, GLenum, const GLvoid* *, GLsizei);
 #endif /* GL_GLEXT_PROTOTYPES */
 typedef void (GL_APIENTRYP PFNGLMULTIDRAWARRAYSEXTPROC) (GLenum mode, GLint *first, GLsizei *count, GLsizei primcount);
@@ -1232,6 +1612,11 @@ typedef void (GL_APIENTRYP PFNGLVALIDATEPROGRAMPIPELINEEXTPROC) (GLuint pipeline
 typedef void (GL_APIENTRYP PFNGLGETPROGRAMPIPELINEINFOLOGEXTPROC) (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
 #endif
 
+/* GL_EXT_shader_framebuffer_fetch */
+#ifndef GL_EXT_shader_framebuffer_fetch
+#define GL_EXT_shader_framebuffer_fetch 1
+#endif
+
 /* GL_EXT_shader_texture_lod */
 #ifndef GL_EXT_shader_texture_lod
 #define GL_EXT_shader_texture_lod 1
@@ -1306,6 +1691,15 @@ typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum
 #endif
 
 /*------------------------------------------------------------------------*
+ * FJ extension functions
+ *------------------------------------------------------------------------*/
+
+/* GL_FJ_shader_binary_GCCSO */
+#ifndef GL_FJ_shader_binary_GCCSO
+#define GL_FJ_shader_binary_GCCSO 1
+#endif
+
+/*------------------------------------------------------------------------*
  * IMG extension functions
  *------------------------------------------------------------------------*/
 
@@ -1329,6 +1723,11 @@ typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum
 #define GL_IMG_texture_compression_pvrtc 1
 #endif
 
+/* GL_IMG_texture_compression_pvrtc2 */
+#ifndef GL_IMG_texture_compression_pvrtc2
+#define GL_IMG_texture_compression_pvrtc2 1
+#endif
+
 /* GL_IMG_multisampled_render_to_texture */
 #ifndef GL_IMG_multisampled_render_to_texture
 #define GL_IMG_multisampled_render_to_texture 1
@@ -1336,8 +1735,8 @@ typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum
 GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleIMG (GLenum, GLsizei, GLenum, GLsizei, GLsizei);
 GL_APICALL void GL_APIENTRY glFramebufferTexture2DMultisampleIMG (GLenum, GLenum, GLenum, GLuint, GLint, GLsizei);
 #endif
-typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEIMG) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DMULTISAMPLEIMG) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
+typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEIMGPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DMULTISAMPLEIMGPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
 #endif
 
 /*------------------------------------------------------------------------*
@@ -1369,6 +1768,7 @@ GL_APICALL void GL_APIENTRY glDrawBuffersNV (GLsizei n, const GLenum *bufs);
 typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSNVPROC) (GLsizei n, const GLenum *bufs);
 #endif
 
+/* GL_EXT_draw_buffers */
 #ifndef GL_EXT_draw_buffers
 #define GL_EXT_draw_buffers 1
 #ifdef GL_GLEXT_PROTOTYPES
@@ -1377,6 +1777,17 @@ GL_APICALL void GL_APIENTRY glDrawBuffersEXT (GLsizei n, const GLenum *bufs);
 typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSEXTPROC) (GLsizei n, const GLenum *bufs);
 #endif
 
+/* GL_NV_draw_instanced */
+#ifndef GL_NV_draw_instanced
+#define GL_NV_draw_instanced 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDrawArraysInstancedNV (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glDrawElementsInstancedNV (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
+#endif
+typedef void (GL_APIENTRYP PFNDRAWARRAYSINSTANCEDNVPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNDRAWELEMENTSINSTANCEDNVPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
+#endif
+
 /* GL_NV_fbo_color_attachments */
 #ifndef GL_NV_fbo_color_attachments
 #define GL_NV_fbo_color_attachments 1
@@ -1403,6 +1814,38 @@ typedef void (GL_APIENTRYP PFNGLFINISHFENCENVPROC) (GLuint fence);
 typedef void (GL_APIENTRYP PFNGLSETFENCENVPROC) (GLuint fence, GLenum condition);
 #endif
 
+/* GL_NV_framebuffer_blit */
+#ifndef GL_NV_framebuffer_blit
+#define GL_NV_framebuffer_blit 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glBlitFramebufferNV (int srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+#endif
+typedef void (GL_APIENTRYP PFNBLITFRAMEBUFFERNVPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+#endif
+
+/* GL_NV_framebuffer_multisample */
+#ifndef GL_NV_framebuffer_multisample
+#define GL_NV_framebuffer_multisample 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleNV ( GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+#endif
+typedef void (GL_APIENTRYP PFNRENDERBUFFERSTORAGEMULTISAMPLENVPROC) ( GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+#endif
+
+/* GL_NV_generate_mipmap_sRGB */
+#ifndef GL_NV_generate_mipmap_sRGB
+#define GL_NV_generate_mipmap_sRGB 1
+#endif
+
+/* GL_NV_instanced_arrays */
+#ifndef GL_NV_instanced_arrays
+#define GL_NV_instanced_arrays 1
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glVertexAttribDivisorNV (GLuint index, GLuint divisor);
+#endif
+typedef void (GL_APIENTRYP PFNVERTEXATTRIBDIVISORNVPROC) (GLuint index, GLuint divisor);
+#endif
+
 /* GL_NV_read_buffer */
 #ifndef GL_NV_read_buffer
 #define GL_NV_read_buffer 1
@@ -1432,6 +1875,26 @@ typedef void (GL_APIENTRYP PFNGLREADBUFFERNVPROC) (GLenum mode);
 #define GL_NV_read_stencil 1
 #endif
 
+/* GL_NV_shadow_samplers_array */
+#ifndef GL_NV_shadow_samplers_array
+#define GL_NV_shadow_samplers_array 1
+#endif
+
+/* GL_NV_shadow_samplers_cube */
+#ifndef GL_NV_shadow_samplers_cube
+#define GL_NV_shadow_samplers_cube 1
+#endif
+
+/* GL_NV_sRGB_formats */
+#ifndef GL_NV_sRGB_formats
+#define GL_NV_sRGB_formats 1
+#endif
+
+/* GL_NV_texture_border_clamp */
+#ifndef GL_NV_texture_border_clamp
+#define GL_NV_texture_border_clamp 1
+#endif
+
 /* GL_NV_texture_compression_s3tc_update */
 #ifndef GL_NV_texture_compression_s3tc_update
 #define GL_NV_texture_compression_s3tc_update 1
@@ -1455,6 +1918,11 @@ GL_APICALL void GL_APIENTRY glAlphaFuncQCOM (GLenum func, GLclampf ref);
 typedef void (GL_APIENTRYP PFNGLALPHAFUNCQCOMPROC) (GLenum func, GLclampf ref);
 #endif
 
+/* GL_QCOM_binning_control */
+#ifndef GL_QCOM_binning_control
+#define GL_QCOM_binning_control 1
+#endif
+
 /* GL_QCOM_driver_control */
 #ifndef GL_QCOM_driver_control
 #define GL_QCOM_driver_control 1
@@ -1538,11 +2006,6 @@ typedef void (GL_APIENTRYP PFNGLENDTILINGQCOMPROC) (GLbitfield preserveMask);
 #define GL_VIV_shader_binary 1
 #endif
 
-/* GL_ANGLE_program_binary */
-#ifndef GL_ANGLE_program_binary
-#define GL_ANGLE_program_binary 1
-#endif
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/src/3rdparty/angle/include/GLES3/gl3.h b/src/3rdparty/angle/include/GLES3/gl3.h
new file mode 100644
index 0000000000..9c79862c0d
--- /dev/null
+++ b/src/3rdparty/angle/include/GLES3/gl3.h
@@ -0,0 +1,1061 @@
+#ifndef __gl3_h_
+#define __gl3_h_
+
+/* 
+ * gl3.h last updated on $Date: 2013-02-12 14:37:24 -0800 (Tue, 12 Feb 2013) $
+ */
+
+#include <GLES3/gl3platform.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+** Copyright (c) 2007-2013 The Khronos Group Inc.
+**
+** Permission is hereby granted, free of charge, to any person obtaining a
+** copy of this software and/or associated documentation files (the
+** "Materials"), to deal in the Materials without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Materials, and to
+** permit persons to whom the Materials are furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Materials.
+**
+** THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
+*/
+
+/*-------------------------------------------------------------------------
+ * Data type definitions
+ *-----------------------------------------------------------------------*/
+
+/* OpenGL ES 2.0 */
+
+typedef void             GLvoid;
+typedef char             GLchar;
+typedef unsigned int     GLenum;
+typedef unsigned char    GLboolean;
+typedef unsigned int     GLbitfield;
+typedef khronos_int8_t   GLbyte;
+typedef short            GLshort;
+typedef int              GLint;
+typedef int              GLsizei;
+typedef khronos_uint8_t  GLubyte;
+typedef unsigned short   GLushort;
+typedef unsigned int     GLuint;
+typedef khronos_float_t  GLfloat;
+typedef khronos_float_t  GLclampf;
+typedef khronos_int32_t  GLfixed;
+typedef khronos_intptr_t GLintptr;
+typedef khronos_ssize_t  GLsizeiptr;
+
+/* OpenGL ES 3.0 */
+
+typedef unsigned short   GLhalf;
+typedef khronos_int64_t  GLint64;
+typedef khronos_uint64_t GLuint64;
+typedef struct __GLsync *GLsync;
+
+/*-------------------------------------------------------------------------
+ * Token definitions
+ *-----------------------------------------------------------------------*/
+
+/* OpenGL ES core versions */
+#define GL_ES_VERSION_3_0                                1
+#define GL_ES_VERSION_2_0                                1
+
+/* OpenGL ES 2.0 */
+
+/* ClearBufferMask */
+#define GL_DEPTH_BUFFER_BIT                              0x00000100
+#define GL_STENCIL_BUFFER_BIT                            0x00000400
+#define GL_COLOR_BUFFER_BIT                              0x00004000
+
+/* Boolean */
+#define GL_FALSE                                         0
+#define GL_TRUE                                          1
+
+/* BeginMode */
+#define GL_POINTS                                        0x0000
+#define GL_LINES                                         0x0001
+#define GL_LINE_LOOP                                     0x0002
+#define GL_LINE_STRIP                                    0x0003
+#define GL_TRIANGLES                                     0x0004
+#define GL_TRIANGLE_STRIP                                0x0005
+#define GL_TRIANGLE_FAN                                  0x0006
+
+/* BlendingFactorDest */
+#define GL_ZERO                                          0
+#define GL_ONE                                           1
+#define GL_SRC_COLOR                                     0x0300
+#define GL_ONE_MINUS_SRC_COLOR                           0x0301
+#define GL_SRC_ALPHA                                     0x0302
+#define GL_ONE_MINUS_SRC_ALPHA                           0x0303
+#define GL_DST_ALPHA                                     0x0304
+#define GL_ONE_MINUS_DST_ALPHA                           0x0305
+
+/* BlendingFactorSrc */
+/*      GL_ZERO */
+/*      GL_ONE */
+#define GL_DST_COLOR                                     0x0306
+#define GL_ONE_MINUS_DST_COLOR                           0x0307
+#define GL_SRC_ALPHA_SATURATE                            0x0308
+/*      GL_SRC_ALPHA */
+/*      GL_ONE_MINUS_SRC_ALPHA */
+/*      GL_DST_ALPHA */
+/*      GL_ONE_MINUS_DST_ALPHA */
+
+/* BlendEquationSeparate */
+#define GL_FUNC_ADD                                      0x8006
+#define GL_BLEND_EQUATION                                0x8009
+#define GL_BLEND_EQUATION_RGB                            0x8009    /* same as BLEND_EQUATION */
+#define GL_BLEND_EQUATION_ALPHA                          0x883D
+
+/* BlendSubtract */
+#define GL_FUNC_SUBTRACT                                 0x800A
+#define GL_FUNC_REVERSE_SUBTRACT                         0x800B
+
+/* Separate Blend Functions */
+#define GL_BLEND_DST_RGB                                 0x80C8
+#define GL_BLEND_SRC_RGB                                 0x80C9
+#define GL_BLEND_DST_ALPHA                               0x80CA
+#define GL_BLEND_SRC_ALPHA                               0x80CB
+#define GL_CONSTANT_COLOR                                0x8001
+#define GL_ONE_MINUS_CONSTANT_COLOR                      0x8002
+#define GL_CONSTANT_ALPHA                                0x8003
+#define GL_ONE_MINUS_CONSTANT_ALPHA                      0x8004
+#define GL_BLEND_COLOR                                   0x8005
+
+/* Buffer Objects */
+#define GL_ARRAY_BUFFER                                  0x8892
+#define GL_ELEMENT_ARRAY_BUFFER                          0x8893
+#define GL_ARRAY_BUFFER_BINDING                          0x8894
+#define GL_ELEMENT_ARRAY_BUFFER_BINDING                  0x8895
+
+#define GL_STREAM_DRAW                                   0x88E0
+#define GL_STATIC_DRAW                                   0x88E4
+#define GL_DYNAMIC_DRAW                                  0x88E8
+
+#define GL_BUFFER_SIZE                                   0x8764
+#define GL_BUFFER_USAGE                                  0x8765
+
+#define GL_CURRENT_VERTEX_ATTRIB                         0x8626
+
+/* CullFaceMode */
+#define GL_FRONT                                         0x0404
+#define GL_BACK                                          0x0405
+#define GL_FRONT_AND_BACK                                0x0408
+
+/* DepthFunction */
+/*      GL_NEVER */
+/*      GL_LESS */
+/*      GL_EQUAL */
+/*      GL_LEQUAL */
+/*      GL_GREATER */
+/*      GL_NOTEQUAL */
+/*      GL_GEQUAL */
+/*      GL_ALWAYS */
+
+/* EnableCap */
+#define GL_TEXTURE_2D                                    0x0DE1
+#define GL_CULL_FACE                                     0x0B44
+#define GL_BLEND                                         0x0BE2
+#define GL_DITHER                                        0x0BD0
+#define GL_STENCIL_TEST                                  0x0B90
+#define GL_DEPTH_TEST                                    0x0B71
+#define GL_SCISSOR_TEST                                  0x0C11
+#define GL_POLYGON_OFFSET_FILL                           0x8037
+#define GL_SAMPLE_ALPHA_TO_COVERAGE                      0x809E
+#define GL_SAMPLE_COVERAGE                               0x80A0
+
+/* ErrorCode */
+#define GL_NO_ERROR                                      0
+#define GL_INVALID_ENUM                                  0x0500
+#define GL_INVALID_VALUE                                 0x0501
+#define GL_INVALID_OPERATION                             0x0502
+#define GL_OUT_OF_MEMORY                                 0x0505
+
+/* FrontFaceDirection */
+#define GL_CW                                            0x0900
+#define GL_CCW                                           0x0901
+
+/* GetPName */
+#define GL_LINE_WIDTH                                    0x0B21
+#define GL_ALIASED_POINT_SIZE_RANGE                      0x846D
+#define GL_ALIASED_LINE_WIDTH_RANGE                      0x846E
+#define GL_CULL_FACE_MODE                                0x0B45
+#define GL_FRONT_FACE                                    0x0B46
+#define GL_DEPTH_RANGE                                   0x0B70
+#define GL_DEPTH_WRITEMASK                               0x0B72
+#define GL_DEPTH_CLEAR_VALUE                             0x0B73
+#define GL_DEPTH_FUNC                                    0x0B74
+#define GL_STENCIL_CLEAR_VALUE                           0x0B91
+#define GL_STENCIL_FUNC                                  0x0B92
+#define GL_STENCIL_FAIL                                  0x0B94
+#define GL_STENCIL_PASS_DEPTH_FAIL                       0x0B95
+#define GL_STENCIL_PASS_DEPTH_PASS                       0x0B96
+#define GL_STENCIL_REF                                   0x0B97
+#define GL_STENCIL_VALUE_MASK                            0x0B93
+#define GL_STENCIL_WRITEMASK                             0x0B98
+#define GL_STENCIL_BACK_FUNC                             0x8800
+#define GL_STENCIL_BACK_FAIL                             0x8801
+#define GL_STENCIL_BACK_PASS_DEPTH_FAIL                  0x8802
+#define GL_STENCIL_BACK_PASS_DEPTH_PASS                  0x8803
+#define GL_STENCIL_BACK_REF                              0x8CA3
+#define GL_STENCIL_BACK_VALUE_MASK                       0x8CA4
+#define GL_STENCIL_BACK_WRITEMASK                        0x8CA5
+#define GL_VIEWPORT                                      0x0BA2
+#define GL_SCISSOR_BOX                                   0x0C10
+/*      GL_SCISSOR_TEST */
+#define GL_COLOR_CLEAR_VALUE                             0x0C22
+#define GL_COLOR_WRITEMASK                               0x0C23
+#define GL_UNPACK_ALIGNMENT                              0x0CF5
+#define GL_PACK_ALIGNMENT                                0x0D05
+#define GL_MAX_TEXTURE_SIZE                              0x0D33
+#define GL_MAX_VIEWPORT_DIMS                             0x0D3A
+#define GL_SUBPIXEL_BITS                                 0x0D50
+#define GL_RED_BITS                                      0x0D52
+#define GL_GREEN_BITS                                    0x0D53
+#define GL_BLUE_BITS                                     0x0D54
+#define GL_ALPHA_BITS                                    0x0D55
+#define GL_DEPTH_BITS                                    0x0D56
+#define GL_STENCIL_BITS                                  0x0D57
+#define GL_POLYGON_OFFSET_UNITS                          0x2A00
+/*      GL_POLYGON_OFFSET_FILL */
+#define GL_POLYGON_OFFSET_FACTOR                         0x8038
+#define GL_TEXTURE_BINDING_2D                            0x8069
+#define GL_SAMPLE_BUFFERS                                0x80A8
+#define GL_SAMPLES                                       0x80A9
+#define GL_SAMPLE_COVERAGE_VALUE                         0x80AA
+#define GL_SAMPLE_COVERAGE_INVERT                        0x80AB
+
+/* GetTextureParameter */
+/*      GL_TEXTURE_MAG_FILTER */
+/*      GL_TEXTURE_MIN_FILTER */
+/*      GL_TEXTURE_WRAP_S */
+/*      GL_TEXTURE_WRAP_T */
+
+#define GL_NUM_COMPRESSED_TEXTURE_FORMATS                0x86A2
+#define GL_COMPRESSED_TEXTURE_FORMATS                    0x86A3
+
+/* HintMode */
+#define GL_DONT_CARE                                     0x1100
+#define GL_FASTEST                                       0x1101
+#define GL_NICEST                                        0x1102
+
+/* HintTarget */
+#define GL_GENERATE_MIPMAP_HINT                          0x8192
+
+/* DataType */
+#define GL_BYTE                                          0x1400
+#define GL_UNSIGNED_BYTE                                 0x1401
+#define GL_SHORT                                         0x1402
+#define GL_UNSIGNED_SHORT                                0x1403
+#define GL_INT                                           0x1404
+#define GL_UNSIGNED_INT                                  0x1405
+#define GL_FLOAT                                         0x1406
+#define GL_FIXED                                         0x140C
+
+/* PixelFormat */
+#define GL_DEPTH_COMPONENT                               0x1902
+#define GL_ALPHA                                         0x1906
+#define GL_RGB                                           0x1907
+#define GL_RGBA                                          0x1908
+#define GL_LUMINANCE                                     0x1909
+#define GL_LUMINANCE_ALPHA                               0x190A
+
+/* PixelType */
+/*      GL_UNSIGNED_BYTE */
+#define GL_UNSIGNED_SHORT_4_4_4_4                        0x8033
+#define GL_UNSIGNED_SHORT_5_5_5_1                        0x8034
+#define GL_UNSIGNED_SHORT_5_6_5                          0x8363
+
+/* Shaders */
+#define GL_FRAGMENT_SHADER                               0x8B30
+#define GL_VERTEX_SHADER                                 0x8B31
+#define GL_MAX_VERTEX_ATTRIBS                            0x8869
+#define GL_MAX_VERTEX_UNIFORM_VECTORS                    0x8DFB
+#define GL_MAX_VARYING_VECTORS                           0x8DFC
+#define GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS              0x8B4D
+#define GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS                0x8B4C
+#define GL_MAX_TEXTURE_IMAGE_UNITS                       0x8872
+#define GL_MAX_FRAGMENT_UNIFORM_VECTORS                  0x8DFD
+#define GL_SHADER_TYPE                                   0x8B4F
+#define GL_DELETE_STATUS                                 0x8B80
+#define GL_LINK_STATUS                                   0x8B82
+#define GL_VALIDATE_STATUS                               0x8B83
+#define GL_ATTACHED_SHADERS                              0x8B85
+#define GL_ACTIVE_UNIFORMS                               0x8B86
+#define GL_ACTIVE_UNIFORM_MAX_LENGTH                     0x8B87
+#define GL_ACTIVE_ATTRIBUTES                             0x8B89
+#define GL_ACTIVE_ATTRIBUTE_MAX_LENGTH                   0x8B8A
+#define GL_SHADING_LANGUAGE_VERSION                      0x8B8C
+#define GL_CURRENT_PROGRAM                               0x8B8D
+
+/* StencilFunction */
+#define GL_NEVER                                         0x0200
+#define GL_LESS                                          0x0201
+#define GL_EQUAL                                         0x0202
+#define GL_LEQUAL                                        0x0203
+#define GL_GREATER                                       0x0204
+#define GL_NOTEQUAL                                      0x0205
+#define GL_GEQUAL                                        0x0206
+#define GL_ALWAYS                                        0x0207
+
+/* StencilOp */
+/*      GL_ZERO */
+#define GL_KEEP                                          0x1E00
+#define GL_REPLACE                                       0x1E01
+#define GL_INCR                                          0x1E02
+#define GL_DECR                                          0x1E03
+#define GL_INVERT                                        0x150A
+#define GL_INCR_WRAP                                     0x8507
+#define GL_DECR_WRAP                                     0x8508
+
+/* StringName */
+#define GL_VENDOR                                        0x1F00
+#define GL_RENDERER                                      0x1F01
+#define GL_VERSION                                       0x1F02
+#define GL_EXTENSIONS                                    0x1F03
+
+/* TextureMagFilter */
+#define GL_NEAREST                                       0x2600
+#define GL_LINEAR                                        0x2601
+
+/* TextureMinFilter */
+/*      GL_NEAREST */
+/*      GL_LINEAR */
+#define GL_NEAREST_MIPMAP_NEAREST                        0x2700
+#define GL_LINEAR_MIPMAP_NEAREST                         0x2701
+#define GL_NEAREST_MIPMAP_LINEAR                         0x2702
+#define GL_LINEAR_MIPMAP_LINEAR                          0x2703
+
+/* TextureParameterName */
+#define GL_TEXTURE_MAG_FILTER                            0x2800
+#define GL_TEXTURE_MIN_FILTER                            0x2801
+#define GL_TEXTURE_WRAP_S                                0x2802
+#define GL_TEXTURE_WRAP_T                                0x2803
+
+/* TextureTarget */
+/*      GL_TEXTURE_2D */
+#define GL_TEXTURE                                       0x1702
+
+#define GL_TEXTURE_CUBE_MAP                              0x8513
+#define GL_TEXTURE_BINDING_CUBE_MAP                      0x8514
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_X                   0x8515
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X                   0x8516
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y                   0x8517
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y                   0x8518
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z                   0x8519
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z                   0x851A
+#define GL_MAX_CUBE_MAP_TEXTURE_SIZE                     0x851C
+
+/* TextureUnit */
+#define GL_TEXTURE0                                      0x84C0
+#define GL_TEXTURE1                                      0x84C1
+#define GL_TEXTURE2                                      0x84C2
+#define GL_TEXTURE3                                      0x84C3
+#define GL_TEXTURE4                                      0x84C4
+#define GL_TEXTURE5                                      0x84C5
+#define GL_TEXTURE6                                      0x84C6
+#define GL_TEXTURE7                                      0x84C7
+#define GL_TEXTURE8                                      0x84C8
+#define GL_TEXTURE9                                      0x84C9
+#define GL_TEXTURE10                                     0x84CA
+#define GL_TEXTURE11                                     0x84CB
+#define GL_TEXTURE12                                     0x84CC
+#define GL_TEXTURE13                                     0x84CD
+#define GL_TEXTURE14                                     0x84CE
+#define GL_TEXTURE15                                     0x84CF
+#define GL_TEXTURE16                                     0x84D0
+#define GL_TEXTURE17                                     0x84D1
+#define GL_TEXTURE18                                     0x84D2
+#define GL_TEXTURE19                                     0x84D3
+#define GL_TEXTURE20                                     0x84D4
+#define GL_TEXTURE21                                     0x84D5
+#define GL_TEXTURE22                                     0x84D6
+#define GL_TEXTURE23                                     0x84D7
+#define GL_TEXTURE24                                     0x84D8
+#define GL_TEXTURE25                                     0x84D9
+#define GL_TEXTURE26                                     0x84DA
+#define GL_TEXTURE27                                     0x84DB
+#define GL_TEXTURE28                                     0x84DC
+#define GL_TEXTURE29                                     0x84DD
+#define GL_TEXTURE30                                     0x84DE
+#define GL_TEXTURE31                                     0x84DF
+#define GL_ACTIVE_TEXTURE                                0x84E0
+
+/* TextureWrapMode */
+#define GL_REPEAT                                        0x2901
+#define GL_CLAMP_TO_EDGE                                 0x812F
+#define GL_MIRRORED_REPEAT                               0x8370
+
+/* Uniform Types */
+#define GL_FLOAT_VEC2                                    0x8B50
+#define GL_FLOAT_VEC3                                    0x8B51
+#define GL_FLOAT_VEC4                                    0x8B52
+#define GL_INT_VEC2                                      0x8B53
+#define GL_INT_VEC3                                      0x8B54
+#define GL_INT_VEC4                                      0x8B55
+#define GL_BOOL                                          0x8B56
+#define GL_BOOL_VEC2                                     0x8B57
+#define GL_BOOL_VEC3                                     0x8B58
+#define GL_BOOL_VEC4                                     0x8B59
+#define GL_FLOAT_MAT2                                    0x8B5A
+#define GL_FLOAT_MAT3                                    0x8B5B
+#define GL_FLOAT_MAT4                                    0x8B5C
+#define GL_SAMPLER_2D                                    0x8B5E
+#define GL_SAMPLER_CUBE                                  0x8B60
+
+/* Vertex Arrays */
+#define GL_VERTEX_ATTRIB_ARRAY_ENABLED                   0x8622
+#define GL_VERTEX_ATTRIB_ARRAY_SIZE                      0x8623
+#define GL_VERTEX_ATTRIB_ARRAY_STRIDE                    0x8624
+#define GL_VERTEX_ATTRIB_ARRAY_TYPE                      0x8625
+#define GL_VERTEX_ATTRIB_ARRAY_NORMALIZED                0x886A
+#define GL_VERTEX_ATTRIB_ARRAY_POINTER                   0x8645
+#define GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING            0x889F
+
+/* Read Format */
+#define GL_IMPLEMENTATION_COLOR_READ_TYPE                0x8B9A
+#define GL_IMPLEMENTATION_COLOR_READ_FORMAT              0x8B9B
+
+/* Shader Source */
+#define GL_COMPILE_STATUS                                0x8B81
+#define GL_INFO_LOG_LENGTH                               0x8B84
+#define GL_SHADER_SOURCE_LENGTH                          0x8B88
+#define GL_SHADER_COMPILER                               0x8DFA
+
+/* Shader Binary */
+#define GL_SHADER_BINARY_FORMATS                         0x8DF8
+#define GL_NUM_SHADER_BINARY_FORMATS                     0x8DF9
+
+/* Shader Precision-Specified Types */
+#define GL_LOW_FLOAT                                     0x8DF0
+#define GL_MEDIUM_FLOAT                                  0x8DF1
+#define GL_HIGH_FLOAT                                    0x8DF2
+#define GL_LOW_INT                                       0x8DF3
+#define GL_MEDIUM_INT                                    0x8DF4
+#define GL_HIGH_INT                                      0x8DF5
+
+/* Framebuffer Object. */
+#define GL_FRAMEBUFFER                                   0x8D40
+#define GL_RENDERBUFFER                                  0x8D41
+
+#define GL_RGBA4                                         0x8056
+#define GL_RGB5_A1                                       0x8057
+#define GL_RGB565                                        0x8D62
+#define GL_DEPTH_COMPONENT16                             0x81A5
+#define GL_STENCIL_INDEX8                                0x8D48
+
+#define GL_RENDERBUFFER_WIDTH                            0x8D42
+#define GL_RENDERBUFFER_HEIGHT                           0x8D43
+#define GL_RENDERBUFFER_INTERNAL_FORMAT                  0x8D44
+#define GL_RENDERBUFFER_RED_SIZE                         0x8D50
+#define GL_RENDERBUFFER_GREEN_SIZE                       0x8D51
+#define GL_RENDERBUFFER_BLUE_SIZE                        0x8D52
+#define GL_RENDERBUFFER_ALPHA_SIZE                       0x8D53
+#define GL_RENDERBUFFER_DEPTH_SIZE                       0x8D54
+#define GL_RENDERBUFFER_STENCIL_SIZE                     0x8D55
+
+#define GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE            0x8CD0
+#define GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME            0x8CD1
+#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL          0x8CD2
+#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE  0x8CD3
+
+#define GL_COLOR_ATTACHMENT0                             0x8CE0
+#define GL_DEPTH_ATTACHMENT                              0x8D00
+#define GL_STENCIL_ATTACHMENT                            0x8D20
+
+#define GL_NONE                                          0
+
+#define GL_FRAMEBUFFER_COMPLETE                          0x8CD5
+#define GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT             0x8CD6
+#define GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT     0x8CD7
+#define GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS             0x8CD9
+#define GL_FRAMEBUFFER_UNSUPPORTED                       0x8CDD
+
+#define GL_FRAMEBUFFER_BINDING                           0x8CA6
+#define GL_RENDERBUFFER_BINDING                          0x8CA7
+#define GL_MAX_RENDERBUFFER_SIZE                         0x84E8
+
+#define GL_INVALID_FRAMEBUFFER_OPERATION                 0x0506
+
+/* OpenGL ES 3.0 */
+
+#define GL_READ_BUFFER                                   0x0C02
+#define GL_UNPACK_ROW_LENGTH                             0x0CF2
+#define GL_UNPACK_SKIP_ROWS                              0x0CF3
+#define GL_UNPACK_SKIP_PIXELS                            0x0CF4
+#define GL_PACK_ROW_LENGTH                               0x0D02
+#define GL_PACK_SKIP_ROWS                                0x0D03
+#define GL_PACK_SKIP_PIXELS                              0x0D04
+#define GL_COLOR                                         0x1800
+#define GL_DEPTH                                         0x1801
+#define GL_STENCIL                                       0x1802
+#define GL_RED                                           0x1903
+#define GL_RGB8                                          0x8051
+#define GL_RGBA8                                         0x8058
+#define GL_RGB10_A2                                      0x8059
+#define GL_TEXTURE_BINDING_3D                            0x806A
+#define GL_UNPACK_SKIP_IMAGES                            0x806D
+#define GL_UNPACK_IMAGE_HEIGHT                           0x806E
+#define GL_TEXTURE_3D                                    0x806F
+#define GL_TEXTURE_WRAP_R                                0x8072
+#define GL_MAX_3D_TEXTURE_SIZE                           0x8073
+#define GL_UNSIGNED_INT_2_10_10_10_REV                   0x8368
+#define GL_MAX_ELEMENTS_VERTICES                         0x80E8
+#define GL_MAX_ELEMENTS_INDICES                          0x80E9
+#define GL_TEXTURE_MIN_LOD                               0x813A
+#define GL_TEXTURE_MAX_LOD                               0x813B
+#define GL_TEXTURE_BASE_LEVEL                            0x813C
+#define GL_TEXTURE_MAX_LEVEL                             0x813D
+#define GL_MIN                                           0x8007
+#define GL_MAX                                           0x8008
+#define GL_DEPTH_COMPONENT24                             0x81A6
+#define GL_MAX_TEXTURE_LOD_BIAS                          0x84FD
+#define GL_TEXTURE_COMPARE_MODE                          0x884C
+#define GL_TEXTURE_COMPARE_FUNC                          0x884D
+#define GL_CURRENT_QUERY                                 0x8865
+#define GL_QUERY_RESULT                                  0x8866
+#define GL_QUERY_RESULT_AVAILABLE                        0x8867
+#define GL_BUFFER_MAPPED                                 0x88BC
+#define GL_BUFFER_MAP_POINTER                            0x88BD
+#define GL_STREAM_READ                                   0x88E1
+#define GL_STREAM_COPY                                   0x88E2
+#define GL_STATIC_READ                                   0x88E5
+#define GL_STATIC_COPY                                   0x88E6
+#define GL_DYNAMIC_READ                                  0x88E9
+#define GL_DYNAMIC_COPY                                  0x88EA
+#define GL_MAX_DRAW_BUFFERS                              0x8824
+#define GL_DRAW_BUFFER0                                  0x8825
+#define GL_DRAW_BUFFER1                                  0x8826
+#define GL_DRAW_BUFFER2                                  0x8827
+#define GL_DRAW_BUFFER3                                  0x8828
+#define GL_DRAW_BUFFER4                                  0x8829
+#define GL_DRAW_BUFFER5                                  0x882A
+#define GL_DRAW_BUFFER6                                  0x882B
+#define GL_DRAW_BUFFER7                                  0x882C
+#define GL_DRAW_BUFFER8                                  0x882D
+#define GL_DRAW_BUFFER9                                  0x882E
+#define GL_DRAW_BUFFER10                                 0x882F
+#define GL_DRAW_BUFFER11                                 0x8830
+#define GL_DRAW_BUFFER12                                 0x8831
+#define GL_DRAW_BUFFER13                                 0x8832
+#define GL_DRAW_BUFFER14                                 0x8833
+#define GL_DRAW_BUFFER15                                 0x8834
+#define GL_MAX_FRAGMENT_UNIFORM_COMPONENTS               0x8B49
+#define GL_MAX_VERTEX_UNIFORM_COMPONENTS                 0x8B4A
+#define GL_SAMPLER_3D                                    0x8B5F
+#define GL_SAMPLER_2D_SHADOW                             0x8B62
+#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT               0x8B8B
+#define GL_PIXEL_PACK_BUFFER                             0x88EB
+#define GL_PIXEL_UNPACK_BUFFER                           0x88EC
+#define GL_PIXEL_PACK_BUFFER_BINDING                     0x88ED
+#define GL_PIXEL_UNPACK_BUFFER_BINDING                   0x88EF
+#define GL_FLOAT_MAT2x3                                  0x8B65
+#define GL_FLOAT_MAT2x4                                  0x8B66
+#define GL_FLOAT_MAT3x2                                  0x8B67
+#define GL_FLOAT_MAT3x4                                  0x8B68
+#define GL_FLOAT_MAT4x2                                  0x8B69
+#define GL_FLOAT_MAT4x3                                  0x8B6A
+#define GL_SRGB                                          0x8C40
+#define GL_SRGB8                                         0x8C41
+#define GL_SRGB8_ALPHA8                                  0x8C43
+#define GL_COMPARE_REF_TO_TEXTURE                        0x884E
+#define GL_MAJOR_VERSION                                 0x821B
+#define GL_MINOR_VERSION                                 0x821C
+#define GL_NUM_EXTENSIONS                                0x821D
+#define GL_RGBA32F                                       0x8814
+#define GL_RGB32F                                        0x8815
+#define GL_RGBA16F                                       0x881A
+#define GL_RGB16F                                        0x881B
+#define GL_VERTEX_ATTRIB_ARRAY_INTEGER                   0x88FD
+#define GL_MAX_ARRAY_TEXTURE_LAYERS                      0x88FF
+#define GL_MIN_PROGRAM_TEXEL_OFFSET                      0x8904
+#define GL_MAX_PROGRAM_TEXEL_OFFSET                      0x8905
+#define GL_MAX_VARYING_COMPONENTS                        0x8B4B
+#define GL_TEXTURE_2D_ARRAY                              0x8C1A
+#define GL_TEXTURE_BINDING_2D_ARRAY                      0x8C1D
+#define GL_R11F_G11F_B10F                                0x8C3A
+#define GL_UNSIGNED_INT_10F_11F_11F_REV                  0x8C3B
+#define GL_RGB9_E5                                       0x8C3D
+#define GL_UNSIGNED_INT_5_9_9_9_REV                      0x8C3E
+#define GL_TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH         0x8C76
+#define GL_TRANSFORM_FEEDBACK_BUFFER_MODE                0x8C7F
+#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS    0x8C80
+#define GL_TRANSFORM_FEEDBACK_VARYINGS                   0x8C83
+#define GL_TRANSFORM_FEEDBACK_BUFFER_START               0x8C84
+#define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE                0x8C85
+#define GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN         0x8C88
+#define GL_RASTERIZER_DISCARD                            0x8C89
+#define GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS 0x8C8A
+#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS       0x8C8B
+#define GL_INTERLEAVED_ATTRIBS                           0x8C8C
+#define GL_SEPARATE_ATTRIBS                              0x8C8D
+#define GL_TRANSFORM_FEEDBACK_BUFFER                     0x8C8E
+#define GL_TRANSFORM_FEEDBACK_BUFFER_BINDING             0x8C8F
+#define GL_RGBA32UI                                      0x8D70
+#define GL_RGB32UI                                       0x8D71
+#define GL_RGBA16UI                                      0x8D76
+#define GL_RGB16UI                                       0x8D77
+#define GL_RGBA8UI                                       0x8D7C
+#define GL_RGB8UI                                        0x8D7D
+#define GL_RGBA32I                                       0x8D82
+#define GL_RGB32I                                        0x8D83
+#define GL_RGBA16I                                       0x8D88
+#define GL_RGB16I                                        0x8D89
+#define GL_RGBA8I                                        0x8D8E
+#define GL_RGB8I                                         0x8D8F
+#define GL_RED_INTEGER                                   0x8D94
+#define GL_RGB_INTEGER                                   0x8D98
+#define GL_RGBA_INTEGER                                  0x8D99
+#define GL_SAMPLER_2D_ARRAY                              0x8DC1
+#define GL_SAMPLER_2D_ARRAY_SHADOW                       0x8DC4
+#define GL_SAMPLER_CUBE_SHADOW                           0x8DC5
+#define GL_UNSIGNED_INT_VEC2                             0x8DC6
+#define GL_UNSIGNED_INT_VEC3                             0x8DC7
+#define GL_UNSIGNED_INT_VEC4                             0x8DC8
+#define GL_INT_SAMPLER_2D                                0x8DCA
+#define GL_INT_SAMPLER_3D                                0x8DCB
+#define GL_INT_SAMPLER_CUBE                              0x8DCC
+#define GL_INT_SAMPLER_2D_ARRAY                          0x8DCF
+#define GL_UNSIGNED_INT_SAMPLER_2D                       0x8DD2
+#define GL_UNSIGNED_INT_SAMPLER_3D                       0x8DD3
+#define GL_UNSIGNED_INT_SAMPLER_CUBE                     0x8DD4
+#define GL_UNSIGNED_INT_SAMPLER_2D_ARRAY                 0x8DD7
+#define GL_BUFFER_ACCESS_FLAGS                           0x911F
+#define GL_BUFFER_MAP_LENGTH                             0x9120
+#define GL_BUFFER_MAP_OFFSET                             0x9121
+#define GL_DEPTH_COMPONENT32F                            0x8CAC
+#define GL_DEPTH32F_STENCIL8                             0x8CAD
+#define GL_FLOAT_32_UNSIGNED_INT_24_8_REV                0x8DAD
+#define GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING         0x8210
+#define GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE         0x8211
+#define GL_FRAMEBUFFER_ATTACHMENT_RED_SIZE               0x8212
+#define GL_FRAMEBUFFER_ATTACHMENT_GREEN_SIZE             0x8213
+#define GL_FRAMEBUFFER_ATTACHMENT_BLUE_SIZE              0x8214
+#define GL_FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE             0x8215
+#define GL_FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE             0x8216
+#define GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE           0x8217
+#define GL_FRAMEBUFFER_DEFAULT                           0x8218
+#define GL_FRAMEBUFFER_UNDEFINED                         0x8219
+#define GL_DEPTH_STENCIL_ATTACHMENT                      0x821A
+#define GL_DEPTH_STENCIL                                 0x84F9
+#define GL_UNSIGNED_INT_24_8                             0x84FA
+#define GL_DEPTH24_STENCIL8                              0x88F0
+#define GL_UNSIGNED_NORMALIZED                           0x8C17
+#define GL_DRAW_FRAMEBUFFER_BINDING                      GL_FRAMEBUFFER_BINDING
+#define GL_READ_FRAMEBUFFER                              0x8CA8
+#define GL_DRAW_FRAMEBUFFER                              0x8CA9
+#define GL_READ_FRAMEBUFFER_BINDING                      0x8CAA
+#define GL_RENDERBUFFER_SAMPLES                          0x8CAB
+#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER          0x8CD4
+#define GL_MAX_COLOR_ATTACHMENTS                         0x8CDF
+#define GL_COLOR_ATTACHMENT1                             0x8CE1
+#define GL_COLOR_ATTACHMENT2                             0x8CE2
+#define GL_COLOR_ATTACHMENT3                             0x8CE3
+#define GL_COLOR_ATTACHMENT4                             0x8CE4
+#define GL_COLOR_ATTACHMENT5                             0x8CE5
+#define GL_COLOR_ATTACHMENT6                             0x8CE6
+#define GL_COLOR_ATTACHMENT7                             0x8CE7
+#define GL_COLOR_ATTACHMENT8                             0x8CE8
+#define GL_COLOR_ATTACHMENT9                             0x8CE9
+#define GL_COLOR_ATTACHMENT10                            0x8CEA
+#define GL_COLOR_ATTACHMENT11                            0x8CEB
+#define GL_COLOR_ATTACHMENT12                            0x8CEC
+#define GL_COLOR_ATTACHMENT13                            0x8CED
+#define GL_COLOR_ATTACHMENT14                            0x8CEE
+#define GL_COLOR_ATTACHMENT15                            0x8CEF
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE            0x8D56
+#define GL_MAX_SAMPLES                                   0x8D57
+#define GL_HALF_FLOAT                                    0x140B
+#define GL_MAP_READ_BIT                                  0x0001
+#define GL_MAP_WRITE_BIT                                 0x0002
+#define GL_MAP_INVALIDATE_RANGE_BIT                      0x0004
+#define GL_MAP_INVALIDATE_BUFFER_BIT                     0x0008
+#define GL_MAP_FLUSH_EXPLICIT_BIT                        0x0010
+#define GL_MAP_UNSYNCHRONIZED_BIT                        0x0020
+#define GL_RG                                            0x8227
+#define GL_RG_INTEGER                                    0x8228
+#define GL_R8                                            0x8229
+#define GL_RG8                                           0x822B
+#define GL_R16F                                          0x822D
+#define GL_R32F                                          0x822E
+#define GL_RG16F                                         0x822F
+#define GL_RG32F                                         0x8230
+#define GL_R8I                                           0x8231
+#define GL_R8UI                                          0x8232
+#define GL_R16I                                          0x8233
+#define GL_R16UI                                         0x8234
+#define GL_R32I                                          0x8235
+#define GL_R32UI                                         0x8236
+#define GL_RG8I                                          0x8237
+#define GL_RG8UI                                         0x8238
+#define GL_RG16I                                         0x8239
+#define GL_RG16UI                                        0x823A
+#define GL_RG32I                                         0x823B
+#define GL_RG32UI                                        0x823C
+#define GL_VERTEX_ARRAY_BINDING                          0x85B5
+#define GL_R8_SNORM                                      0x8F94
+#define GL_RG8_SNORM                                     0x8F95
+#define GL_RGB8_SNORM                                    0x8F96
+#define GL_RGBA8_SNORM                                   0x8F97
+#define GL_SIGNED_NORMALIZED                             0x8F9C
+#define GL_PRIMITIVE_RESTART_FIXED_INDEX                 0x8D69
+#define GL_COPY_READ_BUFFER                              0x8F36
+#define GL_COPY_WRITE_BUFFER                             0x8F37
+#define GL_COPY_READ_BUFFER_BINDING                      GL_COPY_READ_BUFFER
+#define GL_COPY_WRITE_BUFFER_BINDING                     GL_COPY_WRITE_BUFFER
+#define GL_UNIFORM_BUFFER                                0x8A11
+#define GL_UNIFORM_BUFFER_BINDING                        0x8A28
+#define GL_UNIFORM_BUFFER_START                          0x8A29
+#define GL_UNIFORM_BUFFER_SIZE                           0x8A2A
+#define GL_MAX_VERTEX_UNIFORM_BLOCKS                     0x8A2B
+#define GL_MAX_FRAGMENT_UNIFORM_BLOCKS                   0x8A2D
+#define GL_MAX_COMBINED_UNIFORM_BLOCKS                   0x8A2E
+#define GL_MAX_UNIFORM_BUFFER_BINDINGS                   0x8A2F
+#define GL_MAX_UNIFORM_BLOCK_SIZE                        0x8A30
+#define GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS        0x8A31
+#define GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS      0x8A33
+#define GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT               0x8A34
+#define GL_ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH          0x8A35
+#define GL_ACTIVE_UNIFORM_BLOCKS                         0x8A36
+#define GL_UNIFORM_TYPE                                  0x8A37
+#define GL_UNIFORM_SIZE                                  0x8A38
+#define GL_UNIFORM_NAME_LENGTH                           0x8A39
+#define GL_UNIFORM_BLOCK_INDEX                           0x8A3A
+#define GL_UNIFORM_OFFSET                                0x8A3B
+#define GL_UNIFORM_ARRAY_STRIDE                          0x8A3C
+#define GL_UNIFORM_MATRIX_STRIDE                         0x8A3D
+#define GL_UNIFORM_IS_ROW_MAJOR                          0x8A3E
+#define GL_UNIFORM_BLOCK_BINDING                         0x8A3F
+#define GL_UNIFORM_BLOCK_DATA_SIZE                       0x8A40
+#define GL_UNIFORM_BLOCK_NAME_LENGTH                     0x8A41
+#define GL_UNIFORM_BLOCK_ACTIVE_UNIFORMS                 0x8A42
+#define GL_UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES          0x8A43
+#define GL_UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER     0x8A44
+#define GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER   0x8A46
+#define GL_INVALID_INDEX                                 0xFFFFFFFFu
+#define GL_MAX_VERTEX_OUTPUT_COMPONENTS                  0x9122
+#define GL_MAX_FRAGMENT_INPUT_COMPONENTS                 0x9125
+#define GL_MAX_SERVER_WAIT_TIMEOUT                       0x9111
+#define GL_OBJECT_TYPE                                   0x9112
+#define GL_SYNC_CONDITION                                0x9113
+#define GL_SYNC_STATUS                                   0x9114
+#define GL_SYNC_FLAGS                                    0x9115
+#define GL_SYNC_FENCE                                    0x9116
+#define GL_SYNC_GPU_COMMANDS_COMPLETE                    0x9117
+#define GL_UNSIGNALED                                    0x9118
+#define GL_SIGNALED                                      0x9119
+#define GL_ALREADY_SIGNALED                              0x911A
+#define GL_TIMEOUT_EXPIRED                               0x911B
+#define GL_CONDITION_SATISFIED                           0x911C
+#define GL_WAIT_FAILED                                   0x911D
+#define GL_SYNC_FLUSH_COMMANDS_BIT                       0x00000001
+#define GL_TIMEOUT_IGNORED                               0xFFFFFFFFFFFFFFFFull
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR                   0x88FE
+#define GL_ANY_SAMPLES_PASSED                            0x8C2F
+#define GL_ANY_SAMPLES_PASSED_CONSERVATIVE               0x8D6A
+#define GL_SAMPLER_BINDING                               0x8919
+#define GL_RGB10_A2UI                                    0x906F
+#define GL_TEXTURE_SWIZZLE_R                             0x8E42
+#define GL_TEXTURE_SWIZZLE_G                             0x8E43
+#define GL_TEXTURE_SWIZZLE_B                             0x8E44
+#define GL_TEXTURE_SWIZZLE_A                             0x8E45
+#define GL_GREEN                                         0x1904
+#define GL_BLUE                                          0x1905
+#define GL_INT_2_10_10_10_REV                            0x8D9F
+#define GL_TRANSFORM_FEEDBACK                            0x8E22
+#define GL_TRANSFORM_FEEDBACK_PAUSED                     0x8E23
+#define GL_TRANSFORM_FEEDBACK_ACTIVE                     0x8E24
+#define GL_TRANSFORM_FEEDBACK_BINDING                    0x8E25
+#define GL_PROGRAM_BINARY_RETRIEVABLE_HINT               0x8257
+#define GL_PROGRAM_BINARY_LENGTH                         0x8741
+#define GL_NUM_PROGRAM_BINARY_FORMATS                    0x87FE
+#define GL_PROGRAM_BINARY_FORMATS                        0x87FF
+#define GL_COMPRESSED_R11_EAC                            0x9270
+#define GL_COMPRESSED_SIGNED_R11_EAC                     0x9271
+#define GL_COMPRESSED_RG11_EAC                           0x9272
+#define GL_COMPRESSED_SIGNED_RG11_EAC                    0x9273
+#define GL_COMPRESSED_RGB8_ETC2                          0x9274
+#define GL_COMPRESSED_SRGB8_ETC2                         0x9275
+#define GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2      0x9276
+#define GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2     0x9277
+#define GL_COMPRESSED_RGBA8_ETC2_EAC                     0x9278
+#define GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC              0x9279
+#define GL_TEXTURE_IMMUTABLE_FORMAT                      0x912F
+#define GL_MAX_ELEMENT_INDEX                             0x8D6B
+#define GL_NUM_SAMPLE_COUNTS                             0x9380
+#define GL_TEXTURE_IMMUTABLE_LEVELS                      0x82DF
+
+/*-------------------------------------------------------------------------
+ * Entrypoint definitions
+ *-----------------------------------------------------------------------*/
+
+/* OpenGL ES 2.0 */
+
+GL_APICALL void           GL_APIENTRY glActiveTexture (GLenum texture);
+GL_APICALL void           GL_APIENTRY glAttachShader (GLuint program, GLuint shader);
+GL_APICALL void           GL_APIENTRY glBindAttribLocation (GLuint program, GLuint index, const GLchar* name);
+GL_APICALL void           GL_APIENTRY glBindBuffer (GLenum target, GLuint buffer);
+GL_APICALL void           GL_APIENTRY glBindFramebuffer (GLenum target, GLuint framebuffer);
+GL_APICALL void           GL_APIENTRY glBindRenderbuffer (GLenum target, GLuint renderbuffer);
+GL_APICALL void           GL_APIENTRY glBindTexture (GLenum target, GLuint texture);
+GL_APICALL void           GL_APIENTRY glBlendColor (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
+GL_APICALL void           GL_APIENTRY glBlendEquation (GLenum mode);
+GL_APICALL void           GL_APIENTRY glBlendEquationSeparate (GLenum modeRGB, GLenum modeAlpha);
+GL_APICALL void           GL_APIENTRY glBlendFunc (GLenum sfactor, GLenum dfactor);
+GL_APICALL void           GL_APIENTRY glBlendFuncSeparate (GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+GL_APICALL void           GL_APIENTRY glBufferData (GLenum target, GLsizeiptr size, const GLvoid* data, GLenum usage);
+GL_APICALL void           GL_APIENTRY glBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, const GLvoid* data);
+GL_APICALL GLenum         GL_APIENTRY glCheckFramebufferStatus (GLenum target);
+GL_APICALL void           GL_APIENTRY glClear (GLbitfield mask);
+GL_APICALL void           GL_APIENTRY glClearColor (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
+GL_APICALL void           GL_APIENTRY glClearDepthf (GLfloat depth);
+GL_APICALL void           GL_APIENTRY glClearStencil (GLint s);
+GL_APICALL void           GL_APIENTRY glColorMask (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
+GL_APICALL void           GL_APIENTRY glCompileShader (GLuint shader);
+GL_APICALL void           GL_APIENTRY glCompressedTexImage2D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid* data);
+GL_APICALL void           GL_APIENTRY glCompressedTexSubImage2D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid* data);
+GL_APICALL void           GL_APIENTRY glCopyTexImage2D (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+GL_APICALL void           GL_APIENTRY glCopyTexSubImage2D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GL_APICALL GLuint         GL_APIENTRY glCreateProgram (void);
+GL_APICALL GLuint         GL_APIENTRY glCreateShader (GLenum type);
+GL_APICALL void           GL_APIENTRY glCullFace (GLenum mode);
+GL_APICALL void           GL_APIENTRY glDeleteBuffers (GLsizei n, const GLuint* buffers);
+GL_APICALL void           GL_APIENTRY glDeleteFramebuffers (GLsizei n, const GLuint* framebuffers);
+GL_APICALL void           GL_APIENTRY glDeleteProgram (GLuint program);
+GL_APICALL void           GL_APIENTRY glDeleteRenderbuffers (GLsizei n, const GLuint* renderbuffers);
+GL_APICALL void           GL_APIENTRY glDeleteShader (GLuint shader);
+GL_APICALL void           GL_APIENTRY glDeleteTextures (GLsizei n, const GLuint* textures);
+GL_APICALL void           GL_APIENTRY glDepthFunc (GLenum func);
+GL_APICALL void           GL_APIENTRY glDepthMask (GLboolean flag);
+GL_APICALL void           GL_APIENTRY glDepthRangef (GLfloat n, GLfloat f);
+GL_APICALL void           GL_APIENTRY glDetachShader (GLuint program, GLuint shader);
+GL_APICALL void           GL_APIENTRY glDisable (GLenum cap);
+GL_APICALL void           GL_APIENTRY glDisableVertexAttribArray (GLuint index);
+GL_APICALL void           GL_APIENTRY glDrawArrays (GLenum mode, GLint first, GLsizei count);
+GL_APICALL void           GL_APIENTRY glDrawElements (GLenum mode, GLsizei count, GLenum type, const GLvoid* indices);
+GL_APICALL void           GL_APIENTRY glEnable (GLenum cap);
+GL_APICALL void           GL_APIENTRY glEnableVertexAttribArray (GLuint index);
+GL_APICALL void           GL_APIENTRY glFinish (void);
+GL_APICALL void           GL_APIENTRY glFlush (void);
+GL_APICALL void           GL_APIENTRY glFramebufferRenderbuffer (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+GL_APICALL void           GL_APIENTRY glFramebufferTexture2D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GL_APICALL void           GL_APIENTRY glFrontFace (GLenum mode);
+GL_APICALL void           GL_APIENTRY glGenBuffers (GLsizei n, GLuint* buffers);
+GL_APICALL void           GL_APIENTRY glGenerateMipmap (GLenum target);
+GL_APICALL void           GL_APIENTRY glGenFramebuffers (GLsizei n, GLuint* framebuffers);
+GL_APICALL void           GL_APIENTRY glGenRenderbuffers (GLsizei n, GLuint* renderbuffers);
+GL_APICALL void           GL_APIENTRY glGenTextures (GLsizei n, GLuint* textures);
+GL_APICALL void           GL_APIENTRY glGetActiveAttrib (GLuint program, GLuint index, GLsizei bufsize, GLsizei* length, GLint* size, GLenum* type, GLchar* name);
+GL_APICALL void           GL_APIENTRY glGetActiveUniform (GLuint program, GLuint index, GLsizei bufsize, GLsizei* length, GLint* size, GLenum* type, GLchar* name);
+GL_APICALL void           GL_APIENTRY glGetAttachedShaders (GLuint program, GLsizei maxcount, GLsizei* count, GLuint* shaders);
+GL_APICALL GLint          GL_APIENTRY glGetAttribLocation (GLuint program, const GLchar* name);
+GL_APICALL void           GL_APIENTRY glGetBooleanv (GLenum pname, GLboolean* params);
+GL_APICALL void           GL_APIENTRY glGetBufferParameteriv (GLenum target, GLenum pname, GLint* params);
+GL_APICALL GLenum         GL_APIENTRY glGetError (void);
+GL_APICALL void           GL_APIENTRY glGetFloatv (GLenum pname, GLfloat* params);
+GL_APICALL void           GL_APIENTRY glGetFramebufferAttachmentParameteriv (GLenum target, GLenum attachment, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetIntegerv (GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetProgramiv (GLuint program, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetProgramInfoLog (GLuint program, GLsizei bufsize, GLsizei* length, GLchar* infolog);
+GL_APICALL void           GL_APIENTRY glGetRenderbufferParameteriv (GLenum target, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetShaderiv (GLuint shader, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetShaderInfoLog (GLuint shader, GLsizei bufsize, GLsizei* length, GLchar* infolog);
+GL_APICALL void           GL_APIENTRY glGetShaderPrecisionFormat (GLenum shadertype, GLenum precisiontype, GLint* range, GLint* precision);
+GL_APICALL void           GL_APIENTRY glGetShaderSource (GLuint shader, GLsizei bufsize, GLsizei* length, GLchar* source);
+GL_APICALL const GLubyte* GL_APIENTRY glGetString (GLenum name);
+GL_APICALL void           GL_APIENTRY glGetTexParameterfv (GLenum target, GLenum pname, GLfloat* params);
+GL_APICALL void           GL_APIENTRY glGetTexParameteriv (GLenum target, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetUniformfv (GLuint program, GLint location, GLfloat* params);
+GL_APICALL void           GL_APIENTRY glGetUniformiv (GLuint program, GLint location, GLint* params);
+GL_APICALL GLint          GL_APIENTRY glGetUniformLocation (GLuint program, const GLchar* name);
+GL_APICALL void           GL_APIENTRY glGetVertexAttribfv (GLuint index, GLenum pname, GLfloat* params);
+GL_APICALL void           GL_APIENTRY glGetVertexAttribiv (GLuint index, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetVertexAttribPointerv (GLuint index, GLenum pname, GLvoid** pointer);
+GL_APICALL void           GL_APIENTRY glHint (GLenum target, GLenum mode);
+GL_APICALL GLboolean      GL_APIENTRY glIsBuffer (GLuint buffer);
+GL_APICALL GLboolean      GL_APIENTRY glIsEnabled (GLenum cap);
+GL_APICALL GLboolean      GL_APIENTRY glIsFramebuffer (GLuint framebuffer);
+GL_APICALL GLboolean      GL_APIENTRY glIsProgram (GLuint program);
+GL_APICALL GLboolean      GL_APIENTRY glIsRenderbuffer (GLuint renderbuffer);
+GL_APICALL GLboolean      GL_APIENTRY glIsShader (GLuint shader);
+GL_APICALL GLboolean      GL_APIENTRY glIsTexture (GLuint texture);
+GL_APICALL void           GL_APIENTRY glLineWidth (GLfloat width);
+GL_APICALL void           GL_APIENTRY glLinkProgram (GLuint program);
+GL_APICALL void           GL_APIENTRY glPixelStorei (GLenum pname, GLint param);
+GL_APICALL void           GL_APIENTRY glPolygonOffset (GLfloat factor, GLfloat units);
+GL_APICALL void           GL_APIENTRY glReadPixels (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLvoid* pixels);
+GL_APICALL void           GL_APIENTRY glReleaseShaderCompiler (void);
+GL_APICALL void           GL_APIENTRY glRenderbufferStorage (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void           GL_APIENTRY glSampleCoverage (GLfloat value, GLboolean invert);
+GL_APICALL void           GL_APIENTRY glScissor (GLint x, GLint y, GLsizei width, GLsizei height);
+GL_APICALL void           GL_APIENTRY glShaderBinary (GLsizei n, const GLuint* shaders, GLenum binaryformat, const GLvoid* binary, GLsizei length);
+GL_APICALL void           GL_APIENTRY glShaderSource (GLuint shader, GLsizei count, const GLchar* const* string, const GLint* length);
+GL_APICALL void           GL_APIENTRY glStencilFunc (GLenum func, GLint ref, GLuint mask);
+GL_APICALL void           GL_APIENTRY glStencilFuncSeparate (GLenum face, GLenum func, GLint ref, GLuint mask);
+GL_APICALL void           GL_APIENTRY glStencilMask (GLuint mask);
+GL_APICALL void           GL_APIENTRY glStencilMaskSeparate (GLenum face, GLuint mask);
+GL_APICALL void           GL_APIENTRY glStencilOp (GLenum fail, GLenum zfail, GLenum zpass);
+GL_APICALL void           GL_APIENTRY glStencilOpSeparate (GLenum face, GLenum fail, GLenum zfail, GLenum zpass);
+GL_APICALL void           GL_APIENTRY glTexImage2D (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid* pixels);
+GL_APICALL void           GL_APIENTRY glTexParameterf (GLenum target, GLenum pname, GLfloat param);
+GL_APICALL void           GL_APIENTRY glTexParameterfv (GLenum target, GLenum pname, const GLfloat* params);
+GL_APICALL void           GL_APIENTRY glTexParameteri (GLenum target, GLenum pname, GLint param);
+GL_APICALL void           GL_APIENTRY glTexParameteriv (GLenum target, GLenum pname, const GLint* params);
+GL_APICALL void           GL_APIENTRY glTexSubImage2D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid* pixels);
+GL_APICALL void           GL_APIENTRY glUniform1f (GLint location, GLfloat x);
+GL_APICALL void           GL_APIENTRY glUniform1fv (GLint location, GLsizei count, const GLfloat* v);
+GL_APICALL void           GL_APIENTRY glUniform1i (GLint location, GLint x);
+GL_APICALL void           GL_APIENTRY glUniform1iv (GLint location, GLsizei count, const GLint* v);
+GL_APICALL void           GL_APIENTRY glUniform2f (GLint location, GLfloat x, GLfloat y);
+GL_APICALL void           GL_APIENTRY glUniform2fv (GLint location, GLsizei count, const GLfloat* v);
+GL_APICALL void           GL_APIENTRY glUniform2i (GLint location, GLint x, GLint y);
+GL_APICALL void           GL_APIENTRY glUniform2iv (GLint location, GLsizei count, const GLint* v);
+GL_APICALL void           GL_APIENTRY glUniform3f (GLint location, GLfloat x, GLfloat y, GLfloat z);
+GL_APICALL void           GL_APIENTRY glUniform3fv (GLint location, GLsizei count, const GLfloat* v);
+GL_APICALL void           GL_APIENTRY glUniform3i (GLint location, GLint x, GLint y, GLint z);
+GL_APICALL void           GL_APIENTRY glUniform3iv (GLint location, GLsizei count, const GLint* v);
+GL_APICALL void           GL_APIENTRY glUniform4f (GLint location, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GL_APICALL void           GL_APIENTRY glUniform4fv (GLint location, GLsizei count, const GLfloat* v);
+GL_APICALL void           GL_APIENTRY glUniform4i (GLint location, GLint x, GLint y, GLint z, GLint w);
+GL_APICALL void           GL_APIENTRY glUniform4iv (GLint location, GLsizei count, const GLint* v);
+GL_APICALL void           GL_APIENTRY glUniformMatrix2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUseProgram (GLuint program);
+GL_APICALL void           GL_APIENTRY glValidateProgram (GLuint program);
+GL_APICALL void           GL_APIENTRY glVertexAttrib1f (GLuint indx, GLfloat x);
+GL_APICALL void           GL_APIENTRY glVertexAttrib1fv (GLuint indx, const GLfloat* values);
+GL_APICALL void           GL_APIENTRY glVertexAttrib2f (GLuint indx, GLfloat x, GLfloat y);
+GL_APICALL void           GL_APIENTRY glVertexAttrib2fv (GLuint indx, const GLfloat* values);
+GL_APICALL void           GL_APIENTRY glVertexAttrib3f (GLuint indx, GLfloat x, GLfloat y, GLfloat z);
+GL_APICALL void           GL_APIENTRY glVertexAttrib3fv (GLuint indx, const GLfloat* values);
+GL_APICALL void           GL_APIENTRY glVertexAttrib4f (GLuint indx, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GL_APICALL void           GL_APIENTRY glVertexAttrib4fv (GLuint indx, const GLfloat* values);
+GL_APICALL void           GL_APIENTRY glVertexAttribPointer (GLuint indx, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid* ptr);
+GL_APICALL void           GL_APIENTRY glViewport (GLint x, GLint y, GLsizei width, GLsizei height);
+
+/* OpenGL ES 3.0 */
+
+GL_APICALL void           GL_APIENTRY glReadBuffer (GLenum mode);
+GL_APICALL void           GL_APIENTRY glDrawRangeElements (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid* indices);
+GL_APICALL void           GL_APIENTRY glTexImage3D (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid* pixels);
+GL_APICALL void           GL_APIENTRY glTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid* pixels);
+GL_APICALL void           GL_APIENTRY glCopyTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GL_APICALL void           GL_APIENTRY glCompressedTexImage3D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid* data);
+GL_APICALL void           GL_APIENTRY glCompressedTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid* data);
+GL_APICALL void           GL_APIENTRY glGenQueries (GLsizei n, GLuint* ids);
+GL_APICALL void           GL_APIENTRY glDeleteQueries (GLsizei n, const GLuint* ids);
+GL_APICALL GLboolean      GL_APIENTRY glIsQuery (GLuint id);
+GL_APICALL void           GL_APIENTRY glBeginQuery (GLenum target, GLuint id);
+GL_APICALL void           GL_APIENTRY glEndQuery (GLenum target);
+GL_APICALL void           GL_APIENTRY glGetQueryiv (GLenum target, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetQueryObjectuiv (GLuint id, GLenum pname, GLuint* params);
+GL_APICALL GLboolean      GL_APIENTRY glUnmapBuffer (GLenum target);
+GL_APICALL void           GL_APIENTRY glGetBufferPointerv (GLenum target, GLenum pname, GLvoid** params);
+GL_APICALL void           GL_APIENTRY glDrawBuffers (GLsizei n, const GLenum* bufs);
+GL_APICALL void           GL_APIENTRY glUniformMatrix2x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix3x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix2x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix4x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix3x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glUniformMatrix4x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glBlitFramebuffer (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+GL_APICALL void           GL_APIENTRY glRenderbufferStorageMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void           GL_APIENTRY glFramebufferTextureLayer (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
+GL_APICALL GLvoid*        GL_APIENTRY glMapBufferRange (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+GL_APICALL void           GL_APIENTRY glFlushMappedBufferRange (GLenum target, GLintptr offset, GLsizeiptr length);
+GL_APICALL void           GL_APIENTRY glBindVertexArray (GLuint array);
+GL_APICALL void           GL_APIENTRY glDeleteVertexArrays (GLsizei n, const GLuint* arrays);
+GL_APICALL void           GL_APIENTRY glGenVertexArrays (GLsizei n, GLuint* arrays);
+GL_APICALL GLboolean      GL_APIENTRY glIsVertexArray (GLuint array);
+GL_APICALL void           GL_APIENTRY glGetIntegeri_v (GLenum target, GLuint index, GLint* data);
+GL_APICALL void           GL_APIENTRY glBeginTransformFeedback (GLenum primitiveMode);
+GL_APICALL void           GL_APIENTRY glEndTransformFeedback (void);
+GL_APICALL void           GL_APIENTRY glBindBufferRange (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+GL_APICALL void           GL_APIENTRY glBindBufferBase (GLenum target, GLuint index, GLuint buffer);
+GL_APICALL void           GL_APIENTRY glTransformFeedbackVaryings (GLuint program, GLsizei count, const GLchar* const* varyings, GLenum bufferMode);
+GL_APICALL void           GL_APIENTRY glGetTransformFeedbackVarying (GLuint program, GLuint index, GLsizei bufSize, GLsizei* length, GLsizei* size, GLenum* type, GLchar* name);
+GL_APICALL void           GL_APIENTRY glVertexAttribIPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid* pointer);
+GL_APICALL void           GL_APIENTRY glGetVertexAttribIiv (GLuint index, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetVertexAttribIuiv (GLuint index, GLenum pname, GLuint* params);
+GL_APICALL void           GL_APIENTRY glVertexAttribI4i (GLuint index, GLint x, GLint y, GLint z, GLint w);
+GL_APICALL void           GL_APIENTRY glVertexAttribI4ui (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+GL_APICALL void           GL_APIENTRY glVertexAttribI4iv (GLuint index, const GLint* v);
+GL_APICALL void           GL_APIENTRY glVertexAttribI4uiv (GLuint index, const GLuint* v);
+GL_APICALL void           GL_APIENTRY glGetUniformuiv (GLuint program, GLint location, GLuint* params);
+GL_APICALL GLint          GL_APIENTRY glGetFragDataLocation (GLuint program, const GLchar *name);
+GL_APICALL void           GL_APIENTRY glUniform1ui (GLint location, GLuint v0);
+GL_APICALL void           GL_APIENTRY glUniform2ui (GLint location, GLuint v0, GLuint v1);
+GL_APICALL void           GL_APIENTRY glUniform3ui (GLint location, GLuint v0, GLuint v1, GLuint v2);
+GL_APICALL void           GL_APIENTRY glUniform4ui (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+GL_APICALL void           GL_APIENTRY glUniform1uiv (GLint location, GLsizei count, const GLuint* value);
+GL_APICALL void           GL_APIENTRY glUniform2uiv (GLint location, GLsizei count, const GLuint* value);
+GL_APICALL void           GL_APIENTRY glUniform3uiv (GLint location, GLsizei count, const GLuint* value);
+GL_APICALL void           GL_APIENTRY glUniform4uiv (GLint location, GLsizei count, const GLuint* value);
+GL_APICALL void           GL_APIENTRY glClearBufferiv (GLenum buffer, GLint drawbuffer, const GLint* value);
+GL_APICALL void           GL_APIENTRY glClearBufferuiv (GLenum buffer, GLint drawbuffer, const GLuint* value);
+GL_APICALL void           GL_APIENTRY glClearBufferfv (GLenum buffer, GLint drawbuffer, const GLfloat* value);
+GL_APICALL void           GL_APIENTRY glClearBufferfi (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil);
+GL_APICALL const GLubyte* GL_APIENTRY glGetStringi (GLenum name, GLuint index);
+GL_APICALL void           GL_APIENTRY glCopyBufferSubData (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
+GL_APICALL void           GL_APIENTRY glGetUniformIndices (GLuint program, GLsizei uniformCount, const GLchar* const* uniformNames, GLuint* uniformIndices);
+GL_APICALL void           GL_APIENTRY glGetActiveUniformsiv (GLuint program, GLsizei uniformCount, const GLuint* uniformIndices, GLenum pname, GLint* params);
+GL_APICALL GLuint         GL_APIENTRY glGetUniformBlockIndex (GLuint program, const GLchar* uniformBlockName);
+GL_APICALL void           GL_APIENTRY glGetActiveUniformBlockiv (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetActiveUniformBlockName (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei* length, GLchar* uniformBlockName);
+GL_APICALL void           GL_APIENTRY glUniformBlockBinding (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding);
+GL_APICALL void           GL_APIENTRY glDrawArraysInstanced (GLenum mode, GLint first, GLsizei count, GLsizei instanceCount);
+GL_APICALL void           GL_APIENTRY glDrawElementsInstanced (GLenum mode, GLsizei count, GLenum type, const GLvoid* indices, GLsizei instanceCount);
+GL_APICALL GLsync         GL_APIENTRY glFenceSync (GLenum condition, GLbitfield flags);
+GL_APICALL GLboolean      GL_APIENTRY glIsSync (GLsync sync);
+GL_APICALL void           GL_APIENTRY glDeleteSync (GLsync sync);
+GL_APICALL GLenum         GL_APIENTRY glClientWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout);
+GL_APICALL void           GL_APIENTRY glWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout);
+GL_APICALL void           GL_APIENTRY glGetInteger64v (GLenum pname, GLint64* params);
+GL_APICALL void           GL_APIENTRY glGetSynciv (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei* length, GLint* values);
+GL_APICALL void           GL_APIENTRY glGetInteger64i_v (GLenum target, GLuint index, GLint64* data);
+GL_APICALL void           GL_APIENTRY glGetBufferParameteri64v (GLenum target, GLenum pname, GLint64* params);
+GL_APICALL void           GL_APIENTRY glGenSamplers (GLsizei count, GLuint* samplers);
+GL_APICALL void           GL_APIENTRY glDeleteSamplers (GLsizei count, const GLuint* samplers);
+GL_APICALL GLboolean      GL_APIENTRY glIsSampler (GLuint sampler);
+GL_APICALL void           GL_APIENTRY glBindSampler (GLuint unit, GLuint sampler);
+GL_APICALL void           GL_APIENTRY glSamplerParameteri (GLuint sampler, GLenum pname, GLint param);
+GL_APICALL void           GL_APIENTRY glSamplerParameteriv (GLuint sampler, GLenum pname, const GLint* param);
+GL_APICALL void           GL_APIENTRY glSamplerParameterf (GLuint sampler, GLenum pname, GLfloat param);
+GL_APICALL void           GL_APIENTRY glSamplerParameterfv (GLuint sampler, GLenum pname, const GLfloat* param);
+GL_APICALL void           GL_APIENTRY glGetSamplerParameteriv (GLuint sampler, GLenum pname, GLint* params);
+GL_APICALL void           GL_APIENTRY glGetSamplerParameterfv (GLuint sampler, GLenum pname, GLfloat* params);
+GL_APICALL void           GL_APIENTRY glVertexAttribDivisor (GLuint index, GLuint divisor);
+GL_APICALL void           GL_APIENTRY glBindTransformFeedback (GLenum target, GLuint id);
+GL_APICALL void           GL_APIENTRY glDeleteTransformFeedbacks (GLsizei n, const GLuint* ids);
+GL_APICALL void           GL_APIENTRY glGenTransformFeedbacks (GLsizei n, GLuint* ids);
+GL_APICALL GLboolean      GL_APIENTRY glIsTransformFeedback (GLuint id);
+GL_APICALL void           GL_APIENTRY glPauseTransformFeedback (void);
+GL_APICALL void           GL_APIENTRY glResumeTransformFeedback (void);
+GL_APICALL void           GL_APIENTRY glGetProgramBinary (GLuint program, GLsizei bufSize, GLsizei* length, GLenum* binaryFormat, GLvoid* binary);
+GL_APICALL void           GL_APIENTRY glProgramBinary (GLuint program, GLenum binaryFormat, const GLvoid* binary, GLsizei length);
+GL_APICALL void           GL_APIENTRY glProgramParameteri (GLuint program, GLenum pname, GLint value);
+GL_APICALL void           GL_APIENTRY glInvalidateFramebuffer (GLenum target, GLsizei numAttachments, const GLenum* attachments);
+GL_APICALL void           GL_APIENTRY glInvalidateSubFramebuffer (GLenum target, GLsizei numAttachments, const GLenum* attachments, GLint x, GLint y, GLsizei width, GLsizei height);
+GL_APICALL void           GL_APIENTRY glTexStorage2D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void           GL_APIENTRY glTexStorage3D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+GL_APICALL void           GL_APIENTRY glGetInternalformativ (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint* params);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/src/3rdparty/angle/include/GLES3/gl3ext.h b/src/3rdparty/angle/include/GLES3/gl3ext.h
new file mode 100644
index 0000000000..4d4ea96c4d
--- /dev/null
+++ b/src/3rdparty/angle/include/GLES3/gl3ext.h
@@ -0,0 +1,24 @@
+#ifndef __gl3ext_h_
+#define __gl3ext_h_
+
+/* $Revision: 17809 $ on $Date:: 2012-05-14 08:03:36 -0700 #$ */
+
+/*
+ * This document is licensed under the SGI Free Software B License Version
+ * 2.0. For details, see http://oss.sgi.com/projects/FreeB/ .
+ */
+
+/* OpenGL ES 3 Extensions
+ *
+ * After an OES extension's interactions with OpenGl ES 3.0 have been documented,
+ * its tokens and function definitions should be added to this file in a manner
+ * that does not conflict with gl2ext.h or gl3.h.
+ *
+ * Tokens and function definitions for extensions that have become standard
+ * features in OpenGL ES 3.0 will not be added to this file.
+ *
+ * Applications using OpenGL-ES-2-only extensions should include gl2ext.h
+ */
+
+#endif /* __gl3ext_h_ */
+
diff --git a/src/3rdparty/angle/include/GLES3/gl3platform.h b/src/3rdparty/angle/include/GLES3/gl3platform.h
new file mode 100644
index 0000000000..1bd1a850fa
--- /dev/null
+++ b/src/3rdparty/angle/include/GLES3/gl3platform.h
@@ -0,0 +1,30 @@
+#ifndef __gl3platform_h_
+#define __gl3platform_h_
+
+/* $Revision: 18437 $ on $Date:: 2012-07-08 23:31:39 -0700 #$ */
+
+/*
+ * This document is licensed under the SGI Free Software B License Version
+ * 2.0. For details, see http://oss.sgi.com/projects/FreeB/ .
+ */
+
+/* Platform-specific types and definitions for OpenGL ES 3.X  gl3.h
+ *
+ * Adopters may modify khrplatform.h and this file to suit their platform.
+ * You are encouraged to submit all modifications to the Khronos group so that
+ * they can be included in future versions of this file.  Please submit changes
+ * by sending them to the public Khronos Bugzilla (http://khronos.org/bugzilla)
+ * by filing a bug against product "OpenGL-ES" component "Registry".
+ */
+
+#include <KHR/khrplatform.h>
+
+#ifndef GL_APICALL
+#define GL_APICALL  KHRONOS_APICALL
+#endif
+
+#ifndef GL_APIENTRY
+#define GL_APIENTRY KHRONOS_APIENTRY
+#endif
+
+#endif /* __gl3platform_h_ */
diff --git a/src/3rdparty/angle/include/GLSLANG/ShaderLang.h b/src/3rdparty/angle/include/GLSLANG/ShaderLang.h
index 9912939b95..b7989f5f7e 100644
--- a/src/3rdparty/angle/include/GLSLANG/ShaderLang.h
+++ b/src/3rdparty/angle/include/GLSLANG/ShaderLang.h
@@ -23,32 +23,32 @@
 #define COMPILER_EXPORT
 #endif
 
-#include "KHR/khrplatform.h"
 #include <stddef.h>
 
+#include "KHR/khrplatform.h"
+
 //
 // This is the platform independent interface between an OGL driver
 // and the shading language compiler.
 //
 
+namespace sh
+{
+// GLenum alias
+typedef unsigned int GLenum;
+}
+
+// Must be included after GLenum proxy typedef
+// Note: make sure to increment ANGLE_SH_VERSION when changing ShaderVars.h
+#include "ShaderVars.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 // Version number for shader translation API.
-// It is incremented everytime the API changes.
-#define ANGLE_SH_VERSION 112
-
-//
-// The names of the following enums have been derived by replacing GL prefix
-// with SH. For example, SH_INFO_LOG_LENGTH is equivalent to GL_INFO_LOG_LENGTH.
-// The enum values are also equal to the values of their GL counterpart. This
-// is done to make it easier for applications to use the shader library.
-//
-typedef enum {
-  SH_FRAGMENT_SHADER = 0x8B30,
-  SH_VERTEX_SHADER   = 0x8B31
-} ShShaderType;
+// It is incremented every time the API changes.
+#define ANGLE_SH_VERSION 130
 
 typedef enum {
   SH_GLES2_SPEC = 0x8B40,
@@ -86,29 +86,6 @@ typedef enum {
 } ShShaderOutput;
 
 typedef enum {
-  SH_NONE           = 0,
-  SH_INT            = 0x1404,
-  SH_FLOAT          = 0x1406,
-  SH_FLOAT_VEC2     = 0x8B50,
-  SH_FLOAT_VEC3     = 0x8B51,
-  SH_FLOAT_VEC4     = 0x8B52,
-  SH_INT_VEC2       = 0x8B53,
-  SH_INT_VEC3       = 0x8B54,
-  SH_INT_VEC4       = 0x8B55,
-  SH_BOOL           = 0x8B56,
-  SH_BOOL_VEC2      = 0x8B57,
-  SH_BOOL_VEC3      = 0x8B58,
-  SH_BOOL_VEC4      = 0x8B59,
-  SH_FLOAT_MAT2     = 0x8B5A,
-  SH_FLOAT_MAT3     = 0x8B5B,
-  SH_FLOAT_MAT4     = 0x8B5C,
-  SH_SAMPLER_2D     = 0x8B5E,
-  SH_SAMPLER_CUBE   = 0x8B60,
-  SH_SAMPLER_2D_RECT_ARB = 0x8B63,
-  SH_SAMPLER_EXTERNAL_OES = 0x8D66
-} ShDataType;
-
-typedef enum {
   SH_PRECISION_HIGHP     = 0x5001,
   SH_PRECISION_MEDIUMP   = 0x5002,
   SH_PRECISION_LOWP      = 0x5003,
@@ -116,19 +93,21 @@ typedef enum {
 } ShPrecisionType;
 
 typedef enum {
-  SH_INFO_LOG_LENGTH             =  0x8B84,
-  SH_OBJECT_CODE_LENGTH          =  0x8B88,  // GL_SHADER_SOURCE_LENGTH
-  SH_ACTIVE_UNIFORMS             =  0x8B86,
-  SH_ACTIVE_UNIFORM_MAX_LENGTH   =  0x8B87,
-  SH_ACTIVE_ATTRIBUTES           =  0x8B89,
-  SH_ACTIVE_ATTRIBUTE_MAX_LENGTH =  0x8B8A,
-  SH_VARYINGS                    =  0x8BBB,
-  SH_VARYING_MAX_LENGTH          =  0x8BBC,
-  SH_MAPPED_NAME_MAX_LENGTH      =  0x6000,
-  SH_NAME_MAX_LENGTH             =  0x6001,
-  SH_HASHED_NAME_MAX_LENGTH      =  0x6002,
-  SH_HASHED_NAMES_COUNT          =  0x6003,
-  SH_ACTIVE_UNIFORMS_ARRAY       =  0x6004
+  SH_INFO_LOG_LENGTH                = 0x8B84,
+  SH_OBJECT_CODE_LENGTH             = 0x8B88,  // GL_SHADER_SOURCE_LENGTH
+  SH_ACTIVE_UNIFORMS                = 0x8B86,
+  SH_ACTIVE_UNIFORM_MAX_LENGTH      = 0x8B87,
+  SH_ACTIVE_ATTRIBUTES              = 0x8B89,
+  SH_ACTIVE_ATTRIBUTE_MAX_LENGTH    = 0x8B8A,
+  SH_VARYINGS                       = 0x8BBB,
+  SH_VARYING_MAX_LENGTH             = 0x8BBC,
+  SH_MAPPED_NAME_MAX_LENGTH         = 0x6000,
+  SH_NAME_MAX_LENGTH                = 0x6001,
+  SH_HASHED_NAME_MAX_LENGTH         = 0x6002,
+  SH_HASHED_NAMES_COUNT             = 0x6003,
+  SH_SHADER_VERSION                 = 0x6004,
+  SH_RESOURCES_STRING_LENGTH        = 0x6005,
+  SH_OUTPUT_TYPE                    = 0x6006
 } ShShaderInfo;
 
 // Compile options.
@@ -140,13 +119,17 @@ typedef enum {
   SH_VARIABLES               = 0x0008,
   SH_LINE_DIRECTIVES         = 0x0010,
   SH_SOURCE_PATH             = 0x0020,
-  SH_MAP_LONG_VARIABLE_NAMES = 0x0040,
-  SH_UNROLL_FOR_LOOP_WITH_INTEGER_INDEX = 0x0080,
+  SH_UNROLL_FOR_LOOP_WITH_INTEGER_INDEX = 0x0040,
+  // If a sampler array index happens to be a loop index,
+  //   1) if its type is integer, unroll the loop.
+  //   2) if its type is float, fail the shader compile.
+  // This is to work around a mac driver bug.
+  SH_UNROLL_FOR_LOOP_WITH_SAMPLER_ARRAY_INDEX = 0x0080,
 
   // This is needed only as a workaround for certain OpenGL driver bugs.
   SH_EMULATE_BUILT_IN_FUNCTIONS = 0x0100,
 
-  // This is an experimental flag to enforce restrictions that aim to prevent
+  // This is an experimental flag to enforce restrictions that aim to prevent 
   // timing attacks.
   // It generates compilation errors for shaders that could expose sensitive
   // texture information via the timing channel.
@@ -159,7 +142,7 @@ typedef enum {
   // This flag only has an effect if all of the following are true:
   // - The shader spec is SH_WEBGL_SPEC.
   // - The compile options contain the SH_TIMING_RESTRICTIONS flag.
-  // - The shader type is SH_FRAGMENT_SHADER.
+  // - The shader type is GL_FRAGMENT_SHADER.
   SH_DEPENDENCY_GRAPH = 0x0400,
 
   // Enforce the GLSL 1.017 Appendix A section 7 packing restrictions.
@@ -202,6 +185,15 @@ typedef enum {
   // It is intended as a workaround for drivers which incorrectly optimize
   // out such varyings and cause a link failure.
   SH_INIT_VARYINGS_WITHOUT_STATIC_USE = 0x20000,
+
+  // This flag scalarizes vec/ivec/bvec/mat constructor args.
+  // It is intended as a workaround for Linux/Mac driver bugs.
+  SH_SCALARIZE_VEC_AND_MAT_CONSTRUCTOR_ARGS = 0x40000,
+
+  // This flag overwrites a struct name with a unique prefix.
+  // It is intended as a workaround for drivers that do not handle
+  // struct scopes correctly, including all Mac drivers and Linux AMD.
+  SH_REGENERATE_STRUCT_NAMES = 0x80000,
 } ShCompileOptions;
 
 // Defines alternate strategies for implementing array index clamping.
@@ -252,11 +244,18 @@ typedef struct
     int ARB_texture_rectangle;
     int EXT_draw_buffers;
     int EXT_frag_depth;
+    int EXT_shader_texture_lod;
 
     // Set to 1 if highp precision is supported in the fragment language.
     // Default is 0.
     int FragmentPrecisionHigh;
 
+    // GLSL ES 3.0 constants.
+    int MaxVertexOutputVectors;
+    int MaxFragmentInputVectors;
+    int MinProgramTexelOffset;
+    int MaxProgramTexelOffset;
+
     // Name Hashing.
     // Set a 64 bit hash function to enable user-defined name hashing.
     // Default is NULL.
@@ -280,7 +279,7 @@ COMPILER_EXPORT void ShInitBuiltInResources(ShBuiltInResources* resources);
 
 //
 // ShHandle held by but opaque to the driver.  It is allocated,
-// managed, and de-allocated by the compiler. It's contents
+// managed, and de-allocated by the compiler. Its contents
 // are defined by and used by the compiler.
 //
 // If handle creation fails, 0 will be returned.
@@ -288,19 +287,30 @@ COMPILER_EXPORT void ShInitBuiltInResources(ShBuiltInResources* resources);
 typedef void* ShHandle;
 
 //
+// Returns the a concatenated list of the items in ShBuiltInResources as a string.
+// This function must be updated whenever ShBuiltInResources is changed.
+// Parameters:
+// handle: Specifies the handle of the compiler to be used.
+// outStringLen: Specifies the size of the buffer, in number of characters. The size
+//               of the buffer required to store the resources string can be obtained
+//               by calling ShGetInfo with SH_RESOURCES_STRING_LENGTH.
+// outStr: Returns a null-terminated string representing all the built-in resources.
+COMPILER_EXPORT void ShGetBuiltInResourcesString(const ShHandle handle, size_t outStringLen, char *outStr);
+
+//
 // Driver calls these to create and destroy compiler objects.
 //
 // Returns the handle of constructed compiler, null if the requested compiler is
 // not supported.
 // Parameters:
-// type: Specifies the type of shader - SH_FRAGMENT_SHADER or SH_VERTEX_SHADER.
+// type: Specifies the type of shader - GL_FRAGMENT_SHADER or GL_VERTEX_SHADER.
 // spec: Specifies the language spec the compiler must conform to -
 //       SH_GLES2_SPEC or SH_WEBGL_SPEC.
 // output: Specifies the output code type - SH_ESSL_OUTPUT, SH_GLSL_OUTPUT,
 //         SH_HLSL9_OUTPUT or SH_HLSL11_OUTPUT.
 // resources: Specifies the built-in resources.
 COMPILER_EXPORT ShHandle ShConstructCompiler(
-    ShShaderType type,
+    sh::GLenum type,
     ShShaderSpec spec,
     ShShaderOutput output,
     const ShBuiltInResources* resources);
@@ -364,6 +374,8 @@ COMPILER_EXPORT int ShCompile(
 // SH_HASHED_NAME_MAX_LENGTH: the max length of a hashed name including the
 //                            null termination character.
 // SH_HASHED_NAMES_COUNT: the number of hashed names from the latest compile.
+// SH_SHADER_VERSION: the version of the shader language
+// SH_OUTPUT_TYPE: the currently set language output type
 //
 // params: Requested parameter
 COMPILER_EXPORT void ShGetInfo(const ShHandle handle,
@@ -422,7 +434,7 @@ COMPILER_EXPORT void ShGetVariableInfo(const ShHandle handle,
                                        int index,
                                        size_t* length,
                                        int* size,
-                                       ShDataType* type,
+                                       sh::GLenum* type,
                                        ShPrecisionType* precision,
                                        int* staticUse,
                                        char* name,
@@ -446,21 +458,21 @@ COMPILER_EXPORT void ShGetNameHashingEntry(const ShHandle handle,
                                            char* name,
                                            char* hashedName);
 
-// Returns a parameter from a compiled shader.
+// Shader variable inspection.
+// Returns a pointer to a list of variables of the designated type.
+// (See ShaderVars.h for type definitions, included above)
+// Returns NULL on failure.
 // Parameters:
 // handle: Specifies the compiler
-// pname: Specifies the parameter to query.
-// The following parameters are defined:
-// SH_ACTIVE_UNIFORMS_ARRAY: an STL vector of active uniforms. Valid only for
-//                           HLSL output.
-// params: Requested parameter
-COMPILER_EXPORT void ShGetInfoPointer(const ShHandle handle,
-                                      ShShaderInfo pname,
-                                      void** params);
+COMPILER_EXPORT const std::vector<sh::Uniform> *ShGetUniforms(const ShHandle handle);
+COMPILER_EXPORT const std::vector<sh::Varying> *ShGetVaryings(const ShHandle handle);
+COMPILER_EXPORT const std::vector<sh::Attribute> *ShGetAttributes(const ShHandle handle);
+COMPILER_EXPORT const std::vector<sh::Attribute> *ShGetOutputVariables(const ShHandle handle);
+COMPILER_EXPORT const std::vector<sh::InterfaceBlock> *ShGetInterfaceBlocks(const ShHandle handle);
 
 typedef struct
 {
-    ShDataType type;
+    sh::GLenum type;
     int size;
 } ShVariableInfo;
 
@@ -477,6 +489,29 @@ COMPILER_EXPORT int ShCheckVariablesWithinPackingLimits(
     ShVariableInfo* varInfoArray,
     size_t varInfoArraySize);
 
+// Gives the compiler-assigned register for an interface block.
+// The method writes the value to the output variable "indexOut".
+// Returns true if it found a valid interface block, false otherwise.
+// Parameters:
+// handle: Specifies the compiler
+// interfaceBlockName: Specifies the interface block
+// indexOut: output variable that stores the assigned register
+COMPILER_EXPORT bool ShGetInterfaceBlockRegister(const ShHandle handle,
+                                                 const char *interfaceBlockName,
+                                                 unsigned int *indexOut);
+
+// Gives the compiler-assigned register for uniforms in the default
+// interface block.
+// The method writes the value to the output variable "indexOut".
+// Returns true if it found a valid default uniform, false otherwise.
+// Parameters:
+// handle: Specifies the compiler
+// interfaceBlockName: Specifies the uniform
+// indexOut: output variable that stores the assigned register
+COMPILER_EXPORT bool ShGetUniformRegister(const ShHandle handle,
+                                          const char *uniformName,
+                                          unsigned int *indexOut);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/src/3rdparty/angle/include/GLSLANG/ShaderVars.h b/src/3rdparty/angle/include/GLSLANG/ShaderVars.h
new file mode 100644
index 0000000000..9c38647dda
--- /dev/null
+++ b/src/3rdparty/angle/include/GLSLANG/ShaderVars.h
@@ -0,0 +1,123 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// ShaderVars.h:
+//  Types to represent GL variables (varyings, uniforms, etc)
+//
+
+#ifndef _COMPILER_INTERFACE_VARIABLES_
+#define _COMPILER_INTERFACE_VARIABLES_
+
+#include <string>
+#include <vector>
+#include <algorithm>
+
+// Assume ShaderLang.h is included before ShaderVars.h, for sh::GLenum
+// Note: make sure to increment ANGLE_SH_VERSION when changing ShaderVars.h
+
+namespace sh
+{
+
+// Varying interpolation qualifier, see section 4.3.9 of the ESSL 3.00.4 spec
+enum InterpolationType
+{
+    INTERPOLATION_SMOOTH,
+    INTERPOLATION_CENTROID,
+    INTERPOLATION_FLAT
+};
+
+// Uniform block layout qualifier, see section 4.3.8.3 of the ESSL 3.00.4 spec
+enum BlockLayoutType
+{
+    BLOCKLAYOUT_STANDARD,
+    BLOCKLAYOUT_PACKED,
+    BLOCKLAYOUT_SHARED
+};
+
+// Base class for all variables defined in shaders, including Varyings, Uniforms, etc
+// Note: we must override the copy constructor and assignment operator so we can
+// work around excessive GCC binary bloating:
+// See https://code.google.com/p/angleproject/issues/detail?id=697
+struct COMPILER_EXPORT ShaderVariable
+{
+    ShaderVariable();
+    ShaderVariable(GLenum typeIn, unsigned int arraySizeIn);
+    ~ShaderVariable();
+    ShaderVariable(const ShaderVariable &other);
+    ShaderVariable &operator=(const ShaderVariable &other);
+
+    bool isArray() const { return arraySize > 0; }
+    unsigned int elementCount() const { return std::max(1u, arraySize); }
+    bool isStruct() const { return !fields.empty(); }
+
+    GLenum type;
+    GLenum precision;
+    std::string name;
+    std::string mappedName;
+    unsigned int arraySize;
+    bool staticUse;
+    std::vector<ShaderVariable> fields;
+    std::string structName;
+};
+
+struct COMPILER_EXPORT Uniform : public ShaderVariable
+{
+    Uniform();
+    ~Uniform();
+    Uniform(const Uniform &other);
+    Uniform &operator=(const Uniform &other);
+};
+
+struct COMPILER_EXPORT Attribute : public ShaderVariable
+{
+    Attribute();
+    ~Attribute();
+    Attribute(const Attribute &other);
+    Attribute &operator=(const Attribute &other);
+
+    int location;
+};
+
+struct COMPILER_EXPORT InterfaceBlockField : public ShaderVariable
+{
+    InterfaceBlockField();
+    ~InterfaceBlockField();
+    InterfaceBlockField(const InterfaceBlockField &other);
+    InterfaceBlockField &operator=(const InterfaceBlockField &other);
+
+    bool isRowMajorLayout;
+};
+
+struct COMPILER_EXPORT Varying : public ShaderVariable
+{
+    Varying();
+    ~Varying();
+    Varying(const Varying &other);
+    Varying &operator=(const Varying &other);
+
+    InterpolationType interpolation;
+    bool isInvariant;
+};
+
+struct COMPILER_EXPORT InterfaceBlock
+{
+    InterfaceBlock();
+    ~InterfaceBlock();
+    InterfaceBlock(const InterfaceBlock &other);
+    InterfaceBlock &operator=(const InterfaceBlock &other);
+
+    std::string name;
+    std::string mappedName;
+    std::string instanceName;
+    unsigned int arraySize;
+    BlockLayoutType layout;
+    bool isRowMajorLayout;
+    bool staticUse;
+    std::vector<InterfaceBlockField> fields;
+};
+
+}
+
+#endif // _COMPILER_INTERFACE_VARIABLES_
diff --git a/src/3rdparty/angle/include/angle_gl.h b/src/3rdparty/angle/include/angle_gl.h
new file mode 100644
index 0000000000..d093f75ee2
--- /dev/null
+++ b/src/3rdparty/angle/include/angle_gl.h
@@ -0,0 +1,23 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// angle_gl.h:
+//   Includes all necessary GL headers and definitions for ANGLE.
+//
+
+#ifndef ANGLE_GL_H_
+#define ANGLE_GL_H_
+
+#include "GLES2/gl2.h"
+#include "GLES2/gl2ext.h"
+#include "GLES3/gl3.h"
+#include "GLES3/gl3ext.h"
+
+// The following enum is used in ANGLE, but is from desktop GL
+#ifndef GL_SAMPLER_2D_RECT_ARB
+#define GL_SAMPLER_2D_RECT_ARB 0x8B63
+#endif
+
+#endif // ANGLE_GL_H_
diff --git a/src/3rdparty/angle/src/commit.h b/src/3rdparty/angle/src/commit.h
index f4a36a3cfe..a2e761b131 100644
--- a/src/3rdparty/angle/src/commit.h
+++ b/src/3rdparty/angle/src/commit.h
@@ -1,2 +1,12 @@
-#define ANGLE_COMMIT_HASH "5bb7ec572d0a"
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// commit.h:
+//   This is a default commit hash header, when git is not available.
+//
+
+#define ANGLE_COMMIT_HASH "abce76206141"
 #define ANGLE_COMMIT_HASH_SIZE 12
+#define ANGLE_COMMIT_DATE "2014-09-23 19:37:05 +0000"
diff --git a/src/3rdparty/angle/src/common/RefCountObject.h b/src/3rdparty/angle/src/common/RefCountObject.h
index 727c71c362..6eeaee1928 100644
--- a/src/3rdparty/angle/src/common/RefCountObject.h
+++ b/src/3rdparty/angle/src/common/RefCountObject.h
@@ -12,12 +12,11 @@
 #ifndef COMMON_REFCOUNTOBJECT_H_
 #define COMMON_REFCOUNTOBJECT_H_
 
-#include <cstddef>
+#include "common/debug.h"
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
+#include "angle_gl.h"
 
-#include "common/debug.h"
+#include <cstddef>
 
 class RefCountObject
 {
@@ -47,7 +46,7 @@ class RefCountObjectBindingPointer
 
   public:
     GLuint id() const { return (mObject != NULL) ? mObject->id() : 0; }
-    bool operator ! () const { return (get() == NULL); }
+    bool operator!() const { return (get() == NULL); }
 
   private:
     RefCountObject *mObject;
@@ -59,7 +58,38 @@ class BindingPointer : public RefCountObjectBindingPointer
   public:
     void set(ObjectType *newObject) { RefCountObjectBindingPointer::set(newObject); }
     ObjectType *get() const { return static_cast<ObjectType*>(RefCountObjectBindingPointer::get()); }
-    ObjectType *operator -> () const { return get(); }
+    ObjectType *operator->() const { return get(); }
+};
+
+template <class ObjectType>
+class OffsetBindingPointer : public RefCountObjectBindingPointer
+{
+  public:
+    OffsetBindingPointer() : mOffset(0), mSize(0) { }
+
+    void set(ObjectType *newObject)
+    {
+        RefCountObjectBindingPointer::set(newObject);
+        mOffset = 0;
+        mSize = 0;
+    }
+
+    void set(ObjectType *newObject, GLintptr offset, GLsizeiptr size)
+    {
+        RefCountObjectBindingPointer::set(newObject);
+        mOffset = offset;
+        mSize = size;
+    }
+
+    GLintptr getOffset() const { return mOffset; }
+    GLsizeiptr getSize() const { return mSize; }
+
+    ObjectType *get() const { return static_cast<ObjectType*>(RefCountObjectBindingPointer::get()); }
+    ObjectType *operator->() const { return get(); }
+
+  private:
+    GLintptr mOffset;
+    GLsizeiptr mSize;
 };
 
 #endif   // COMMON_REFCOUNTOBJECT_H_
diff --git a/src/3rdparty/angle/src/common/angleutils.cpp b/src/3rdparty/angle/src/common/angleutils.cpp
new file mode 100644
index 0000000000..2673abf30a
--- /dev/null
+++ b/src/3rdparty/angle/src/common/angleutils.cpp
@@ -0,0 +1,37 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "common/angleutils.h"
+
+#include <vector>
+
+std::string FormatString(const char *fmt, va_list vararg)
+{
+    static std::vector<char> buffer(512);
+
+    // Attempt to just print to the current buffer
+    int len = vsnprintf(&buffer[0], buffer.size(), fmt, vararg);
+    if (len < 0 || static_cast<size_t>(len) >= buffer.size())
+    {
+        // Buffer was not large enough, calculate the required size and resize the buffer
+        len = vsnprintf(NULL, 0, fmt, vararg);
+        buffer.resize(len + 1);
+
+        // Print again
+        vsnprintf(&buffer[0], buffer.size(), fmt, vararg);
+    }
+
+    return std::string(buffer.data(), len);
+}
+
+std::string FormatString(const char *fmt, ...)
+{
+    va_list vararg;
+    va_start(vararg, fmt);
+    std::string result = FormatString(fmt, vararg);
+    va_end(vararg);
+    return result;
+}
diff --git a/src/3rdparty/angle/src/common/angleutils.h b/src/3rdparty/angle/src/common/angleutils.h
index 7723f0fb72..ddbbd5f501 100644
--- a/src/3rdparty/angle/src/common/angleutils.h
+++ b/src/3rdparty/angle/src/common/angleutils.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -9,7 +9,14 @@
 #ifndef COMMON_ANGLEUTILS_H_
 #define COMMON_ANGLEUTILS_H_
 
+#include "common/platform.h"
+
 #include <stddef.h>
+#include <limits.h>
+#include <string>
+#include <set>
+#include <sstream>
+#include <cstdarg>
 
 // A macro to disallow the copy constructor and operator= functions
 // This must be used in the private: declarations for a class
@@ -17,8 +24,8 @@
   TypeName(const TypeName&);               \
   void operator=(const TypeName&)
 
-template <typename T, unsigned int N>
-inline unsigned int ArraySize(T(&)[N])
+template <typename T, size_t N>
+inline size_t ArraySize(T(&)[N])
 {
     return N;
 }
@@ -50,13 +57,85 @@ void SafeDelete(T*& resource)
 }
 
 template <typename T>
+void SafeDeleteContainer(T& resource)
+{
+    for (typename T::iterator i = resource.begin(); i != resource.end(); i++)
+    {
+        SafeDelete(*i);
+    }
+    resource.clear();
+}
+
+template <typename T>
 void SafeDeleteArray(T*& resource)
 {
     delete[] resource;
     resource = NULL;
 }
 
-#if defined(_MSC_VER)
+// Provide a less-than function for comparing structs
+// Note: struct memory must be initialized to zero, because of packing gaps
+template <typename T>
+inline bool StructLessThan(const T &a, const T &b)
+{
+    return (memcmp(&a, &b, sizeof(T)) < 0);
+}
+
+// Provide a less-than function for comparing structs
+// Note: struct memory must be initialized to zero, because of packing gaps
+template <typename T>
+inline bool StructEquals(const T &a, const T &b)
+{
+    return (memcmp(&a, &b, sizeof(T)) == 0);
+}
+
+template <typename T>
+inline void StructZero(T *obj)
+{
+    memset(obj, 0, sizeof(T));
+}
+
+inline const char* MakeStaticString(const std::string &str)
+{
+    static std::set<std::string> strings;
+    std::set<std::string>::iterator it = strings.find(str);
+    if (it != strings.end())
+    {
+        return it->c_str();
+    }
+
+    return strings.insert(str).first->c_str();
+}
+
+inline std::string ArrayString(unsigned int i)
+{
+    // We assume UINT_MAX and GL_INVALID_INDEX are equal
+    // See DynamicHLSL.cpp
+    if (i == UINT_MAX)
+    {
+        return "";
+    }
+
+    std::stringstream strstr;
+
+    strstr << "[";
+    strstr << i;
+    strstr << "]";
+
+    return strstr.str();
+}
+
+inline std::string Str(int i)
+{
+    std::stringstream strstr;
+    strstr << i;
+    return strstr.str();
+}
+
+std::string FormatString(const char *fmt, va_list vararg);
+std::string FormatString(const char *fmt, ...);
+
+#if defined(_MSC_VER) && _MSC_VER < 1900
 #define snprintf _snprintf
 #endif
 
@@ -66,5 +145,7 @@ void SafeDeleteArray(T*& resource)
 
 #define GL_BGRA4_ANGLEX 0x6ABC
 #define GL_BGR5_A1_ANGLEX 0x6ABD
+#define GL_INT_64_ANGLEX 0x6ABE
+#define GL_STRUCT_ANGLEX 0x6ABF
 
 #endif // COMMON_ANGLEUTILS_H_
diff --git a/src/3rdparty/angle/src/common/blocklayout.cpp b/src/3rdparty/angle/src/common/blocklayout.cpp
new file mode 100644
index 0000000000..e3b2d43566
--- /dev/null
+++ b/src/3rdparty/angle/src/common/blocklayout.cpp
@@ -0,0 +1,251 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// blocklayout.cpp:
+//   Implementation for block layout classes and methods.
+//
+
+#include "common/blocklayout.h"
+#include "common/mathutil.h"
+#include "common/utilities.h"
+
+namespace sh
+{
+
+BlockLayoutEncoder::BlockLayoutEncoder()
+    : mCurrentOffset(0)
+{
+}
+
+BlockMemberInfo BlockLayoutEncoder::encodeType(GLenum type, unsigned int arraySize, bool isRowMajorMatrix)
+{
+    int arrayStride;
+    int matrixStride;
+
+    getBlockLayoutInfo(type, arraySize, isRowMajorMatrix, &arrayStride, &matrixStride);
+
+    const BlockMemberInfo memberInfo(mCurrentOffset * BytesPerComponent, arrayStride * BytesPerComponent, matrixStride * BytesPerComponent, isRowMajorMatrix);
+
+    advanceOffset(type, arraySize, isRowMajorMatrix, arrayStride, matrixStride);
+
+    return memberInfo;
+}
+
+void BlockLayoutEncoder::nextRegister()
+{
+    mCurrentOffset = rx::roundUp<size_t>(mCurrentOffset, ComponentsPerRegister);
+}
+
+Std140BlockEncoder::Std140BlockEncoder()
+{
+}
+
+void Std140BlockEncoder::enterAggregateType()
+{
+    nextRegister();
+}
+
+void Std140BlockEncoder::exitAggregateType()
+{
+    nextRegister();
+}
+
+void Std140BlockEncoder::getBlockLayoutInfo(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int *arrayStrideOut, int *matrixStrideOut)
+{
+    // We assume we are only dealing with 4 byte components (no doubles or half-words currently)
+    ASSERT(gl::VariableComponentSize(gl::VariableComponentType(type)) == BytesPerComponent);
+
+    size_t baseAlignment = 0;
+    int matrixStride = 0;
+    int arrayStride = 0;
+
+    if (gl::IsMatrixType(type))
+    {
+        baseAlignment = ComponentsPerRegister;
+        matrixStride = ComponentsPerRegister;
+
+        if (arraySize > 0)
+        {
+            const int numRegisters = gl::MatrixRegisterCount(type, isRowMajorMatrix);
+            arrayStride = ComponentsPerRegister * numRegisters;
+        }
+    }
+    else if (arraySize > 0)
+    {
+        baseAlignment = ComponentsPerRegister;
+        arrayStride = ComponentsPerRegister;
+    }
+    else
+    {
+        const int numComponents = gl::VariableComponentCount(type);
+        baseAlignment = (numComponents == 3 ? 4u : static_cast<size_t>(numComponents));
+    }
+
+    mCurrentOffset = rx::roundUp(mCurrentOffset, baseAlignment);
+
+    *matrixStrideOut = matrixStride;
+    *arrayStrideOut = arrayStride;
+}
+
+void Std140BlockEncoder::advanceOffset(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int arrayStride, int matrixStride)
+{
+    if (arraySize > 0)
+    {
+        mCurrentOffset += arrayStride * arraySize;
+    }
+    else if (gl::IsMatrixType(type))
+    {
+        ASSERT(matrixStride == ComponentsPerRegister);
+        const int numRegisters = gl::MatrixRegisterCount(type, isRowMajorMatrix);
+        mCurrentOffset += ComponentsPerRegister * numRegisters;
+    }
+    else
+    {
+        mCurrentOffset += gl::VariableComponentCount(type);
+    }
+}
+
+HLSLBlockEncoder::HLSLBlockEncoder(HLSLBlockEncoderStrategy strategy)
+    : mEncoderStrategy(strategy)
+{
+}
+
+void HLSLBlockEncoder::enterAggregateType()
+{
+    nextRegister();
+}
+
+void HLSLBlockEncoder::exitAggregateType()
+{
+}
+
+void HLSLBlockEncoder::getBlockLayoutInfo(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int *arrayStrideOut, int *matrixStrideOut)
+{
+    // We assume we are only dealing with 4 byte components (no doubles or half-words currently)
+    ASSERT(gl::VariableComponentSize(gl::VariableComponentType(type)) == BytesPerComponent);
+
+    int matrixStride = 0;
+    int arrayStride = 0;
+
+    // if variables are not to be packed, or we're about to
+    // pack a matrix or array, skip to the start of the next
+    // register
+    if (!isPacked() ||
+        gl::IsMatrixType(type) ||
+        arraySize > 0)
+    {
+        nextRegister();
+    }
+
+    if (gl::IsMatrixType(type))
+    {
+        matrixStride = ComponentsPerRegister;
+
+        if (arraySize > 0)
+        {
+            const int numRegisters = gl::MatrixRegisterCount(type, isRowMajorMatrix);
+            arrayStride = ComponentsPerRegister * numRegisters;
+        }
+    }
+    else if (arraySize > 0)
+    {
+        arrayStride = ComponentsPerRegister;
+    }
+    else if (isPacked())
+    {
+        int numComponents = gl::VariableComponentCount(type);
+        if ((numComponents + (mCurrentOffset % ComponentsPerRegister)) > ComponentsPerRegister)
+        {
+            nextRegister();
+        }
+    }
+
+    *matrixStrideOut = matrixStride;
+    *arrayStrideOut = arrayStride;
+}
+
+void HLSLBlockEncoder::advanceOffset(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int arrayStride, int matrixStride)
+{
+    if (arraySize > 0)
+    {
+        mCurrentOffset += arrayStride * (arraySize - 1);
+    }
+
+    if (gl::IsMatrixType(type))
+    {
+        ASSERT(matrixStride == ComponentsPerRegister);
+        const int numRegisters = gl::MatrixRegisterCount(type, isRowMajorMatrix);
+        const int numComponents = gl::MatrixComponentCount(type, isRowMajorMatrix);
+        mCurrentOffset += ComponentsPerRegister * (numRegisters - 1);
+        mCurrentOffset += numComponents;
+    }
+    else if (isPacked())
+    {
+        mCurrentOffset += gl::VariableComponentCount(type);
+    }
+    else
+    {
+        mCurrentOffset += ComponentsPerRegister;
+    }
+}
+
+void HLSLBlockEncoder::skipRegisters(unsigned int numRegisters)
+{
+    mCurrentOffset += (numRegisters * ComponentsPerRegister);
+}
+
+HLSLBlockEncoder::HLSLBlockEncoderStrategy HLSLBlockEncoder::GetStrategyFor(ShShaderOutput outputType)
+{
+    switch (outputType)
+    {
+      case SH_HLSL9_OUTPUT: return ENCODE_LOOSE;
+      case SH_HLSL11_OUTPUT: return ENCODE_PACKED;
+      default: UNREACHABLE(); return ENCODE_PACKED;
+    }
+}
+
+template <class ShaderVarType>
+void HLSLVariableRegisterCount(const ShaderVarType &variable, HLSLBlockEncoder *encoder)
+{
+    if (variable.isStruct())
+    {
+        for (size_t arrayElement = 0; arrayElement < variable.elementCount(); arrayElement++)
+        {
+            encoder->enterAggregateType();
+
+            for (size_t fieldIndex = 0; fieldIndex < variable.fields.size(); fieldIndex++)
+            {
+                HLSLVariableRegisterCount(variable.fields[fieldIndex], encoder);
+            }
+
+            encoder->exitAggregateType();
+        }
+    }
+    else
+    {
+        // We operate only on varyings and uniforms, which do not have matrix layout qualifiers
+        encoder->encodeType(variable.type, variable.arraySize, false);
+    }
+}
+
+unsigned int HLSLVariableRegisterCount(const Varying &variable)
+{
+    HLSLBlockEncoder encoder(HLSLBlockEncoder::ENCODE_PACKED);
+    HLSLVariableRegisterCount(variable, &encoder);
+
+    const size_t registerBytes = (encoder.BytesPerComponent * encoder.ComponentsPerRegister);
+    return static_cast<unsigned int>(rx::roundUp<size_t>(encoder.getBlockSize(), registerBytes) / registerBytes);
+}
+
+unsigned int HLSLVariableRegisterCount(const Uniform &variable, ShShaderOutput outputType)
+{
+    HLSLBlockEncoder encoder(HLSLBlockEncoder::GetStrategyFor(outputType));
+    HLSLVariableRegisterCount(variable, &encoder);
+
+    const size_t registerBytes = (encoder.BytesPerComponent * encoder.ComponentsPerRegister);
+    return static_cast<unsigned int>(rx::roundUp<size_t>(encoder.getBlockSize(), registerBytes) / registerBytes);
+}
+
+}
diff --git a/src/3rdparty/angle/src/common/blocklayout.h b/src/3rdparty/angle/src/common/blocklayout.h
new file mode 100644
index 0000000000..d46ac6e547
--- /dev/null
+++ b/src/3rdparty/angle/src/common/blocklayout.h
@@ -0,0 +1,127 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// blocklayout.h:
+//   Methods and classes related to uniform layout and packing in GLSL and HLSL.
+//
+
+#ifndef COMMON_BLOCKLAYOUT_H_
+#define COMMON_BLOCKLAYOUT_H_
+
+#include <cstddef>
+#include <vector>
+
+#include "angle_gl.h"
+#include <GLSLANG/ShaderLang.h>
+
+namespace sh
+{
+struct ShaderVariable;
+struct InterfaceBlockField;
+struct Uniform;
+struct Varying;
+struct InterfaceBlock;
+
+struct BlockMemberInfo
+{
+    BlockMemberInfo(int offset, int arrayStride, int matrixStride, bool isRowMajorMatrix)
+        : offset(offset),
+          arrayStride(arrayStride),
+          matrixStride(matrixStride),
+          isRowMajorMatrix(isRowMajorMatrix)
+    {}
+
+    static BlockMemberInfo getDefaultBlockInfo()
+    {
+        return BlockMemberInfo(-1, -1, -1, false);
+    }
+
+    int offset;
+    int arrayStride;
+    int matrixStride;
+    bool isRowMajorMatrix;
+};
+
+class BlockLayoutEncoder
+{
+  public:
+    BlockLayoutEncoder();
+
+    BlockMemberInfo encodeType(GLenum type, unsigned int arraySize, bool isRowMajorMatrix);
+
+    size_t getBlockSize() const { return mCurrentOffset * BytesPerComponent; }
+    size_t getCurrentRegister() const { return mCurrentOffset / ComponentsPerRegister; }
+    size_t getCurrentElement() const { return mCurrentOffset % ComponentsPerRegister; }
+
+    virtual void enterAggregateType() = 0;
+    virtual void exitAggregateType() = 0;
+
+    static const size_t BytesPerComponent = 4u;
+    static const unsigned int ComponentsPerRegister = 4u;
+
+  protected:
+    size_t mCurrentOffset;
+
+    void nextRegister();
+
+    virtual void getBlockLayoutInfo(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int *arrayStrideOut, int *matrixStrideOut) = 0;
+    virtual void advanceOffset(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int arrayStride, int matrixStride) = 0;
+};
+
+// Block layout according to the std140 block layout
+// See "Standard Uniform Block Layout" in Section 2.11.6 of the OpenGL ES 3.0 specification
+
+class Std140BlockEncoder : public BlockLayoutEncoder
+{
+  public:
+    Std140BlockEncoder();
+
+    virtual void enterAggregateType();
+    virtual void exitAggregateType();
+
+  protected:
+    virtual void getBlockLayoutInfo(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int *arrayStrideOut, int *matrixStrideOut);
+    virtual void advanceOffset(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int arrayStride, int matrixStride);
+};
+
+// Block layout packed according to the D3D9 or default D3D10+ register packing rules
+// See http://msdn.microsoft.com/en-us/library/windows/desktop/bb509632(v=vs.85).aspx
+// The strategy should be ENCODE_LOOSE for D3D9 constant blocks, and ENCODE_PACKED
+// for everything else (D3D10+ constant blocks and all attributes/varyings).
+
+class HLSLBlockEncoder : public BlockLayoutEncoder
+{
+  public:
+    enum HLSLBlockEncoderStrategy
+    {
+        ENCODE_PACKED,
+        ENCODE_LOOSE
+    };
+
+    HLSLBlockEncoder(HLSLBlockEncoderStrategy strategy);
+
+    virtual void enterAggregateType();
+    virtual void exitAggregateType();
+    void skipRegisters(unsigned int numRegisters);
+
+    bool isPacked() const { return mEncoderStrategy == ENCODE_PACKED; }
+
+    static HLSLBlockEncoderStrategy GetStrategyFor(ShShaderOutput outputType);
+
+  protected:
+    virtual void getBlockLayoutInfo(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int *arrayStrideOut, int *matrixStrideOut);
+    virtual void advanceOffset(GLenum type, unsigned int arraySize, bool isRowMajorMatrix, int arrayStride, int matrixStride);
+
+    HLSLBlockEncoderStrategy mEncoderStrategy;
+};
+
+// This method returns the number of used registers for a ShaderVariable. It is dependent on the HLSLBlockEncoder
+// class to count the number of used registers in a struct (which are individually packed according to the same rules).
+unsigned int HLSLVariableRegisterCount(const Varying &variable);
+unsigned int HLSLVariableRegisterCount(const Uniform &variable, ShShaderOutput outputType);
+
+}
+
+#endif // COMMON_BLOCKLAYOUT_H_
diff --git a/src/3rdparty/angle/src/common/debug.cpp b/src/3rdparty/angle/src/common/debug.cpp
index 05d3dc62ad..dcad327564 100644
--- a/src/3rdparty/angle/src/common/debug.cpp
+++ b/src/3rdparty/angle/src/common/debug.cpp
@@ -7,11 +7,13 @@
 // debug.cpp: Debugging utilities.
 
 #include "common/debug.h"
-#include <stdarg.h>
+#include "common/platform.h"
+#include "common/angleutils.h"
 
-#if defined(ANGLE_ENABLE_PERF)
-#include <d3d9.h>
-#endif
+#include <stdarg.h>
+#include <vector>
+#include <fstream>
+#include <cstdio>
 
 namespace gl
 {
@@ -23,25 +25,23 @@ typedef void (*PerfOutputFunction)(unsigned int, const wchar_t*);
 
 static void output(bool traceFileDebugOnly, PerfOutputFunction perfFunc, const char *format, va_list vararg)
 {
+#if defined(ANGLE_ENABLE_PERF) || defined(ANGLE_ENABLE_TRACE)
+    std::string formattedMessage = FormatString(format, vararg);
+#endif
+
 #if defined(ANGLE_ENABLE_PERF)
     if (perfActive())
     {
-        char message[32768];
-        int len = vsprintf_s(message, format, vararg);
-        if (len < 0)
+        // The perf function only accepts wide strings, widen the ascii message
+        static std::wstring wideMessage;
+        if (wideMessage.capacity() < formattedMessage.length())
         {
-            return;
+            wideMessage.reserve(formattedMessage.size());
         }
 
-        // There are no ASCII variants of these D3DPERF functions.
-        wchar_t wideMessage[32768];
-        for (int i = 0; i < len; ++i)
-        {
-            wideMessage[i] = message[i];
-        }
-        wideMessage[len] = 0;
+        wideMessage.assign(formattedMessage.begin(), formattedMessage.end());
 
-        perfFunc(0, wideMessage);
+        perfFunc(0, wideMessage.c_str());
     }
 #endif // ANGLE_ENABLE_PERF
 
@@ -53,12 +53,13 @@ static void output(bool traceFileDebugOnly, PerfOutputFunction perfFunc, const c
     }
 #endif // NDEBUG
 
-    FILE* file = fopen(TRACE_OUTPUT_FILE, "a");
+    static std::ofstream file(TRACE_OUTPUT_FILE, std::ofstream::app);
     if (file)
     {
-        vfprintf(file, format, vararg);
-        fclose(file);
+        file.write(formattedMessage.c_str(), formattedMessage.length());
+        file.flush();
     }
+
 #endif // ANGLE_ENABLE_TRACE
 }
 
diff --git a/src/3rdparty/angle/src/common/debug.h b/src/3rdparty/angle/src/common/debug.h
index 793843895c..bf2bca8f24 100644
--- a/src/3rdparty/angle/src/common/debug.h
+++ b/src/3rdparty/angle/src/common/debug.h
@@ -62,7 +62,7 @@ namespace gl
 // A macro to log a performance event around a scope.
 #if defined(ANGLE_ENABLE_TRACE) || defined(ANGLE_ENABLE_PERF)
 #if defined(_MSC_VER)
-#define EVENT(message, ...) gl::ScopedPerfEventHelper scopedPerfEventHelper ## __LINE__(__FUNCTION__ message "\n", __VA_ARGS__);
+#define EVENT(message, ...) gl::ScopedPerfEventHelper scopedPerfEventHelper ## __LINE__("%s" message "\n", __FUNCTION__, __VA_ARGS__);
 #else
 #define EVENT(message, ...) gl::ScopedPerfEventHelper scopedPerfEventHelper(message "\n", ##__VA_ARGS__);
 #endif // _MSC_VER
@@ -77,15 +77,34 @@ namespace gl
         ERR("\t! Assert failed in %s(%d): "#expression"\n", __FUNCTION__, __LINE__); \
         assert(expression); \
     } while(0)
+#define UNUSED_ASSERTION_VARIABLE(variable)
 #else
 #define ASSERT(expression) (void(0))
+#define UNUSED_ASSERTION_VARIABLE(variable) ((void)variable)
+#endif
+
+#ifndef ANGLE_ENABLE_TRACE
+#define UNUSED_TRACE_VARIABLE(variable) ((void)variable)
+#else
+#define UNUSED_TRACE_VARIABLE(variable)
 #endif
 
 // A macro to indicate unimplemented functionality
+
+#if defined (ANGLE_TEST_CONFIG)
+#define NOASSERT_UNIMPLEMENTED 1
+#endif
+
+// Define NOASSERT_UNIMPLEMENTED to non zero to skip the assert fail in the unimplemented checks
+// This will allow us to test with some automated test suites (eg dEQP) without crashing
+#ifndef NOASSERT_UNIMPLEMENTED
+#define NOASSERT_UNIMPLEMENTED 0
+#endif
+
 #if !defined(NDEBUG)
 #define UNIMPLEMENTED() do { \
     FIXME("\t! Unimplemented: %s(%d)\n", __FUNCTION__, __LINE__); \
-    assert(false); \
+    assert(NOASSERT_UNIMPLEMENTED); \
     } while(0)
 #else
     #define UNIMPLEMENTED() FIXME("\t! Unimplemented: %s(%d)\n", __FUNCTION__, __LINE__)
@@ -101,9 +120,7 @@ namespace gl
     #define UNREACHABLE() ERR("\t! Unreachable reached: %s(%d)\n", __FUNCTION__, __LINE__)
 #endif
 
-// A macro that determines whether an object has a given runtime type. MSVC uses _CPPRTTI.
-// GCC uses __GXX_RTTI, but the macro was introduced in version 4.3, so we assume that all older
-// versions support RTTI.
+// A macro that determines whether an object has a given runtime type.
 #if !defined(NDEBUG) && (!defined(_MSC_VER) || defined(_CPPRTTI)) && (!defined(__GNUC__) || __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || defined(__GXX_RTTI))
 #define HAS_DYNAMIC_TYPE(type, obj) (dynamic_cast<type >(obj) != NULL)
 #else
@@ -111,6 +128,13 @@ namespace gl
 #endif
 
 // A macro functioning as a compile-time assert to validate constant conditions
-#define META_ASSERT(condition) typedef int COMPILE_TIME_ASSERT_##__LINE__[static_cast<bool>(condition)?1:-1]
+#if defined(_MSC_VER) && _MSC_VER >= 1600
+#define META_ASSERT_MSG(condition, msg) static_assert(condition, msg)
+#else
+#define META_ASSERT_CONCAT(a, b) a ## b
+#define META_ASSERT_CONCAT2(a, b) META_ASSERT_CONCAT(a, b)
+#define META_ASSERT_MSG(condition, msg) typedef int META_ASSERT_CONCAT2(COMPILE_TIME_ASSERT_, __LINE__)[static_cast<bool>(condition)?1:-1]
+#endif
+#define META_ASSERT(condition) META_ASSERT_MSG(condition, "compile time assertion failed.")
 
 #endif   // COMMON_DEBUG_H_
diff --git a/src/3rdparty/angle/src/common/event_tracer.cpp b/src/3rdparty/angle/src/common/event_tracer.cpp
deleted file mode 100644
index 142373d13f..0000000000
--- a/src/3rdparty/angle/src/common/event_tracer.cpp
+++ /dev/null
@@ -1,49 +0,0 @@
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-#include "common/event_tracer.h"
-
-namespace gl
-{
-
-GetCategoryEnabledFlagFunc g_getCategoryEnabledFlag;
-AddTraceEventFunc g_addTraceEvent;
-
-}  // namespace gl
-
-extern "C" {
-
-void TRACE_ENTRY SetTraceFunctionPointers(GetCategoryEnabledFlagFunc getCategoryEnabledFlag,
-                                        AddTraceEventFunc addTraceEvent)
-{
-    gl::g_getCategoryEnabledFlag = getCategoryEnabledFlag;
-    gl::g_addTraceEvent = addTraceEvent;
-}
-
-}  // extern "C"
-
-namespace gl
-{
-
-const unsigned char* TraceGetTraceCategoryEnabledFlag(const char* name)
-{
-    if (g_getCategoryEnabledFlag)
-    {
-        return g_getCategoryEnabledFlag(name);
-    }
-    static unsigned char disabled = 0;
-    return &disabled;
-}
-
-void TraceAddTraceEvent(char phase, const unsigned char* categoryGroupEnabled, const char* name, unsigned long long id,
-                        int numArgs, const char** argNames, const unsigned char* argTypes,
-                        const unsigned long long* argValues, unsigned char flags)
-{
-    if (g_addTraceEvent)
-    {
-        g_addTraceEvent(phase, categoryGroupEnabled, name, id, numArgs, argNames, argTypes, argValues, flags);
-    }
-}
-
-}  // namespace gl
diff --git a/src/3rdparty/angle/src/common/event_tracer.h b/src/3rdparty/angle/src/common/event_tracer.h
deleted file mode 100644
index 14b7b298fd..0000000000
--- a/src/3rdparty/angle/src/common/event_tracer.h
+++ /dev/null
@@ -1,41 +0,0 @@
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-#ifndef COMMON_EVENT_TRACER_H_
-#define COMMON_EVENT_TRACER_H_
-
-#if !defined(TRACE_ENTRY)
-#if defined(_WIN32)
-#define TRACE_ENTRY __stdcall
-#else
-#define TRACE_ENTRY
-#endif // // _WIN32
-#endif //TRACE_ENTRY
-
-extern "C" {
-
-typedef const unsigned char* (*GetCategoryEnabledFlagFunc)(const char* name);
-typedef void (*AddTraceEventFunc)(char phase, const unsigned char* categoryGroupEnabled, const char* name,
-                                  unsigned long long id, int numArgs, const char** argNames,
-                                  const unsigned char* argTypes, const unsigned long long* argValues,
-                                  unsigned char flags);
-
-// extern "C" so that it has a reasonable name for GetProcAddress.
-void TRACE_ENTRY SetTraceFunctionPointers(GetCategoryEnabledFlagFunc get_category_enabled_flag,
-                                          AddTraceEventFunc add_trace_event_func);
-
-}
-
-namespace gl
-{
-
-const unsigned char* TraceGetTraceCategoryEnabledFlag(const char* name);
-
-void TraceAddTraceEvent(char phase, const unsigned char* categoryGroupEnabled, const char* name, unsigned long long id,
-                        int numArgs, const char** argNames, const unsigned char* argTypes,
-                        const unsigned long long* argValues, unsigned char flags);
-
-}
-
-#endif  // COMMON_EVENT_TRACER_H_
diff --git a/src/3rdparty/angle/src/common/mathutil.cpp b/src/3rdparty/angle/src/common/mathutil.cpp
new file mode 100644
index 0000000000..496633632b
--- /dev/null
+++ b/src/3rdparty/angle/src/common/mathutil.cpp
@@ -0,0 +1,67 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// mathutil.cpp: Math and bit manipulation functions.
+
+#include "common/mathutil.h"
+
+#include <algorithm>
+#include <math.h>
+
+namespace gl
+{
+
+struct RGB9E5Data
+{
+    unsigned int R : 9;
+    unsigned int G : 9;
+    unsigned int B : 9;
+    unsigned int E : 5;
+};
+
+// B is the exponent bias (15)
+static const int g_sharedexp_bias = 15;
+
+// N is the number of mantissa bits per component (9)
+static const int g_sharedexp_mantissabits = 9;
+
+// Emax is the maximum allowed biased exponent value (31)
+static const int g_sharedexp_maxexponent = 31;
+
+static const float g_sharedexp_max = ((pow(2.0f, g_sharedexp_mantissabits) - 1) /
+                                       pow(2.0f, g_sharedexp_mantissabits)) *
+                                     pow(2.0f, g_sharedexp_maxexponent - g_sharedexp_bias);
+
+unsigned int convertRGBFloatsTo999E5(float red, float green, float blue)
+{
+    const float red_c = std::max<float>(0, std::min(g_sharedexp_max, red));
+    const float green_c = std::max<float>(0, std::min(g_sharedexp_max, green));
+    const float blue_c = std::max<float>(0, std::min(g_sharedexp_max, blue));
+
+    const float max_c = std::max<float>(std::max<float>(red_c, green_c), blue_c);
+    const float exp_p = std::max<float>(-g_sharedexp_bias - 1, floor(log(max_c))) + 1 + g_sharedexp_bias;
+    const int max_s = floor((max_c / (pow(2.0f, exp_p - g_sharedexp_bias - g_sharedexp_mantissabits))) + 0.5f);
+    const int exp_s = (max_s < pow(2.0f, g_sharedexp_mantissabits)) ? exp_p : exp_p + 1;
+
+    RGB9E5Data output;
+    output.R = floor((red_c / (pow(2.0f, exp_s - g_sharedexp_bias - g_sharedexp_mantissabits))) + 0.5f);
+    output.G = floor((green_c / (pow(2.0f, exp_s - g_sharedexp_bias - g_sharedexp_mantissabits))) + 0.5f);
+    output.B = floor((blue_c / (pow(2.0f, exp_s - g_sharedexp_bias - g_sharedexp_mantissabits))) + 0.5f);
+    output.E = exp_s;
+
+    return *reinterpret_cast<unsigned int*>(&output);
+}
+
+void convert999E5toRGBFloats(unsigned int input, float *red, float *green, float *blue)
+{
+    const RGB9E5Data *inputData = reinterpret_cast<const RGB9E5Data*>(&input);
+
+    *red = inputData->R * pow(2.0f, (int)inputData->E - g_sharedexp_bias - g_sharedexp_mantissabits);
+    *green = inputData->G * pow(2.0f, (int)inputData->E - g_sharedexp_bias - g_sharedexp_mantissabits);
+    *blue = inputData->B * pow(2.0f, (int)inputData->E - g_sharedexp_bias - g_sharedexp_mantissabits);
+}
+
+}
diff --git a/src/3rdparty/angle/src/common/mathutil.h b/src/3rdparty/angle/src/common/mathutil.h
new file mode 100644
index 0000000000..52f2bc1c0e
--- /dev/null
+++ b/src/3rdparty/angle/src/common/mathutil.h
@@ -0,0 +1,557 @@
+//
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// mathutil.h: Math and bit manipulation functions.
+
+#ifndef LIBGLESV2_MATHUTIL_H_
+#define LIBGLESV2_MATHUTIL_H_
+
+#include "common/debug.h"
+#include "common/platform.h"
+
+#include <limits>
+#include <algorithm>
+#include <string.h>
+
+namespace gl
+{
+
+const unsigned int Float32One = 0x3F800000;
+const unsigned short Float16One = 0x3C00;
+
+struct Vector4
+{
+    Vector4() {}
+    Vector4(float x, float y, float z, float w) : x(x), y(y), z(z), w(w) {}
+
+    float x;
+    float y;
+    float z;
+    float w;
+};
+
+inline bool isPow2(int x)
+{
+    return (x & (x - 1)) == 0 && (x != 0);
+}
+
+inline int log2(int x)
+{
+    int r = 0;
+    while ((x >> r) > 1) r++;
+    return r;
+}
+
+inline unsigned int ceilPow2(unsigned int x)
+{
+    if (x != 0) x--;
+    x |= x >> 1;
+    x |= x >> 2;
+    x |= x >> 4;
+    x |= x >> 8;
+    x |= x >> 16;
+    x++;
+
+    return x;
+}
+
+inline int clampToInt(unsigned int x)
+{
+    return static_cast<int>(std::min(x, static_cast<unsigned int>(std::numeric_limits<int>::max())));
+}
+
+template <typename DestT, typename SrcT>
+inline DestT clampCast(SrcT value)
+{
+    // This assumes SrcT can properly represent DestT::min/max
+    // Unfortunately we can't use META_ASSERT without C++11 constexpr support
+    ASSERT(static_cast<DestT>(static_cast<SrcT>(std::numeric_limits<DestT>::min())) == std::numeric_limits<DestT>::min());
+    ASSERT(static_cast<DestT>(static_cast<SrcT>(std::numeric_limits<DestT>::max())) == std::numeric_limits<DestT>::max());
+
+    SrcT lo = static_cast<SrcT>(std::numeric_limits<DestT>::min());
+    SrcT hi = static_cast<SrcT>(std::numeric_limits<DestT>::max());
+    return static_cast<DestT>(value > lo ? (value > hi ? hi : value) : lo);
+}
+
+template<typename T, typename MIN, typename MAX>
+inline T clamp(T x, MIN min, MAX max)
+{
+    // Since NaNs fail all comparison tests, a NaN value will default to min
+    return x > min ? (x > max ? max : x) : min;
+}
+
+inline float clamp01(float x)
+{
+    return clamp(x, 0.0f, 1.0f);
+}
+
+template<const int n>
+inline unsigned int unorm(float x)
+{
+    const unsigned int max = 0xFFFFFFFF >> (32 - n);
+
+    if (x > 1)
+    {
+        return max;
+    }
+    else if (x < 0)
+    {
+        return 0;
+    }
+    else
+    {
+        return (unsigned int)(max * x + 0.5f);
+    }
+}
+
+inline bool supportsSSE2()
+{
+#ifdef ANGLE_PLATFORM_WINDOWS
+    static bool checked = false;
+    static bool supports = false;
+
+    if (checked)
+    {
+        return supports;
+    }
+
+#if defined(_M_IX86) || defined(_M_AMD64) // ARM doesn't provide __cpuid()
+    int info[4];
+    __cpuid(info, 0);
+
+    if (info[0] >= 1)
+    {
+        __cpuid(info, 1);
+
+        supports = (info[3] >> 26) & 1;
+    }
+#endif
+
+    checked = true;
+
+    return supports;
+#else
+    UNIMPLEMENTED();
+    return false;
+#endif
+}
+
+template <typename destType, typename sourceType>
+destType bitCast(const sourceType &source)
+{
+    size_t copySize = std::min(sizeof(destType), sizeof(sourceType));
+    destType output;
+    memcpy(&output, &source, copySize);
+    return output;
+}
+
+inline unsigned short float32ToFloat16(float fp32)
+{
+    unsigned int fp32i = (unsigned int&)fp32;
+    unsigned int sign = (fp32i & 0x80000000) >> 16;
+    unsigned int abs = fp32i & 0x7FFFFFFF;
+
+    if(abs > 0x47FFEFFF)   // Infinity
+    {
+        return sign | 0x7FFF;
+    }
+    else if(abs < 0x38800000)   // Denormal
+    {
+        unsigned int mantissa = (abs & 0x007FFFFF) | 0x00800000;
+        int e = 113 - (abs >> 23);
+
+        if(e < 24)
+        {
+            abs = mantissa >> e;
+        }
+        else
+        {
+            abs = 0;
+        }
+
+        return sign | (abs + 0x00000FFF + ((abs >> 13) & 1)) >> 13;
+    }
+    else
+    {
+        return sign | (abs + 0xC8000000 + 0x00000FFF + ((abs >> 13) & 1)) >> 13;
+    }
+}
+
+float float16ToFloat32(unsigned short h);
+
+unsigned int convertRGBFloatsTo999E5(float red, float green, float blue);
+void convert999E5toRGBFloats(unsigned int input, float *red, float *green, float *blue);
+
+inline unsigned short float32ToFloat11(float fp32)
+{
+    const unsigned int float32MantissaMask = 0x7FFFFF;
+    const unsigned int float32ExponentMask = 0x7F800000;
+    const unsigned int float32SignMask = 0x80000000;
+    const unsigned int float32ValueMask = ~float32SignMask;
+    const unsigned int float32ExponentFirstBit = 23;
+    const unsigned int float32ExponentBias = 127;
+
+    const unsigned short float11Max = 0x7BF;
+    const unsigned short float11MantissaMask = 0x3F;
+    const unsigned short float11ExponentMask = 0x7C0;
+    const unsigned short float11BitMask = 0x7FF;
+    const unsigned int float11ExponentBias = 14;
+
+    const unsigned int float32Maxfloat11 = 0x477E0000;
+    const unsigned int float32Minfloat11 = 0x38800000;
+
+    const unsigned int float32Bits = bitCast<unsigned int>(fp32);
+    const bool float32Sign = (float32Bits & float32SignMask) == float32SignMask;
+
+    unsigned int float32Val = float32Bits & float32ValueMask;
+
+    if ((float32Val & float32ExponentMask) == float32ExponentMask)
+    {
+        // INF or NAN
+        if ((float32Val & float32MantissaMask) != 0)
+        {
+            return float11ExponentMask | (((float32Val >> 17) | (float32Val >> 11) | (float32Val >> 6) | (float32Val)) & float11MantissaMask);
+        }
+        else if (float32Sign)
+        {
+            // -INF is clamped to 0 since float11 is positive only
+            return 0;
+        }
+        else
+        {
+            return float11ExponentMask;
+        }
+    }
+    else if (float32Sign)
+    {
+        // float11 is positive only, so clamp to zero
+        return 0;
+    }
+    else if (float32Val > float32Maxfloat11)
+    {
+        // The number is too large to be represented as a float11, set to max
+        return float11Max;
+    }
+    else
+    {
+        if (float32Val < float32Minfloat11)
+        {
+            // The number is too small to be represented as a normalized float11
+            // Convert it to a denormalized value.
+            const unsigned int shift = (float32ExponentBias - float11ExponentBias) - (float32Val >> float32ExponentFirstBit);
+            float32Val = ((1 << float32ExponentFirstBit) | (float32Val & float32MantissaMask)) >> shift;
+        }
+        else
+        {
+            // Rebias the exponent to represent the value as a normalized float11
+            float32Val += 0xC8000000;
+        }
+
+        return ((float32Val + 0xFFFF + ((float32Val >> 17) & 1)) >> 17) & float11BitMask;
+    }
+}
+
+inline unsigned short float32ToFloat10(float fp32)
+{
+    const unsigned int float32MantissaMask = 0x7FFFFF;
+    const unsigned int float32ExponentMask = 0x7F800000;
+    const unsigned int float32SignMask = 0x80000000;
+    const unsigned int float32ValueMask = ~float32SignMask;
+    const unsigned int float32ExponentFirstBit = 23;
+    const unsigned int float32ExponentBias = 127;
+
+    const unsigned short float10Max = 0x3DF;
+    const unsigned short float10MantissaMask = 0x1F;
+    const unsigned short float10ExponentMask = 0x3E0;
+    const unsigned short float10BitMask = 0x3FF;
+    const unsigned int float10ExponentBias = 14;
+
+    const unsigned int float32Maxfloat10 = 0x477C0000;
+    const unsigned int float32Minfloat10 = 0x38800000;
+
+    const unsigned int float32Bits = bitCast<unsigned int>(fp32);
+    const bool float32Sign = (float32Bits & float32SignMask) == float32SignMask;
+
+    unsigned int float32Val = float32Bits & float32ValueMask;
+
+    if ((float32Val & float32ExponentMask) == float32ExponentMask)
+    {
+        // INF or NAN
+        if ((float32Val & float32MantissaMask) != 0)
+        {
+            return float10ExponentMask | (((float32Val >> 18) | (float32Val >> 13) | (float32Val >> 3) | (float32Val)) & float10MantissaMask);
+        }
+        else if (float32Sign)
+        {
+            // -INF is clamped to 0 since float11 is positive only
+            return 0;
+        }
+        else
+        {
+            return float10ExponentMask;
+        }
+    }
+    else if (float32Sign)
+    {
+        // float10 is positive only, so clamp to zero
+        return 0;
+    }
+    else if (float32Val > float32Maxfloat10)
+    {
+        // The number is too large to be represented as a float11, set to max
+        return float10Max;
+    }
+    else
+    {
+        if (float32Val < float32Minfloat10)
+        {
+            // The number is too small to be represented as a normalized float11
+            // Convert it to a denormalized value.
+            const unsigned int shift = (float32ExponentBias - float10ExponentBias) - (float32Val >> float32ExponentFirstBit);
+            float32Val = ((1 << float32ExponentFirstBit) | (float32Val & float32MantissaMask)) >> shift;
+        }
+        else
+        {
+            // Rebias the exponent to represent the value as a normalized float11
+            float32Val += 0xC8000000;
+        }
+
+        return ((float32Val + 0x1FFFF + ((float32Val >> 18) & 1)) >> 18) & float10BitMask;
+    }
+}
+
+inline float float11ToFloat32(unsigned short fp11)
+{
+    unsigned short exponent = (fp11 >> 6) & 0x1F;
+    unsigned short mantissa = fp11 & 0x3F;
+
+    if (exponent == 0x1F)
+    {
+        // INF or NAN
+        return bitCast<float>(0x7f800000 | (mantissa << 17));
+    }
+    else
+    {
+        if (exponent != 0)
+        {
+            // normalized
+        }
+        else if (mantissa != 0)
+        {
+            // The value is denormalized
+            exponent = 1;
+
+            do
+            {
+                exponent--;
+                mantissa <<= 1;
+            }
+            while ((mantissa & 0x40) == 0);
+
+            mantissa = mantissa & 0x3F;
+        }
+        else // The value is zero
+        {
+            exponent = -112;
+        }
+
+        return bitCast<float>(((exponent + 112) << 23) | (mantissa << 17));
+    }
+}
+
+inline float float10ToFloat32(unsigned short fp11)
+{
+    unsigned short exponent = (fp11 >> 5) & 0x1F;
+    unsigned short mantissa = fp11 & 0x1F;
+
+    if (exponent == 0x1F)
+    {
+        // INF or NAN
+        return bitCast<float>(0x7f800000 | (mantissa << 17));
+    }
+    else
+    {
+        if (exponent != 0)
+        {
+            // normalized
+        }
+        else if (mantissa != 0)
+        {
+            // The value is denormalized
+            exponent = 1;
+
+            do
+            {
+                exponent--;
+                mantissa <<= 1;
+            }
+            while ((mantissa & 0x20) == 0);
+
+            mantissa = mantissa & 0x1F;
+        }
+        else // The value is zero
+        {
+            exponent = -112;
+        }
+
+        return bitCast<float>(((exponent + 112) << 23) | (mantissa << 18));
+    }
+}
+
+template <typename T>
+inline float normalizedToFloat(T input)
+{
+    META_ASSERT(std::numeric_limits<T>::is_integer);
+
+    const float inverseMax = 1.0f / std::numeric_limits<T>::max();
+    return input * inverseMax;
+}
+
+template <unsigned int inputBitCount, typename T>
+inline float normalizedToFloat(T input)
+{
+    META_ASSERT(std::numeric_limits<T>::is_integer);
+    META_ASSERT(inputBitCount < (sizeof(T) * 8));
+
+    const float inverseMax = 1.0f / ((1 << inputBitCount) - 1);
+    return input * inverseMax;
+}
+
+template <typename T>
+inline T floatToNormalized(float input)
+{
+    return std::numeric_limits<T>::max() * input + 0.5f;
+}
+
+template <unsigned int outputBitCount, typename T>
+inline T floatToNormalized(float input)
+{
+    META_ASSERT(outputBitCount < (sizeof(T) * 8));
+    return ((1 << outputBitCount) - 1) * input + 0.5f;
+}
+
+template <unsigned int inputBitCount, unsigned int inputBitStart, typename T>
+inline T getShiftedData(T input)
+{
+    META_ASSERT(inputBitCount + inputBitStart <= (sizeof(T) * 8));
+    const T mask = (1 << inputBitCount) - 1;
+    return (input >> inputBitStart) & mask;
+}
+
+template <unsigned int inputBitCount, unsigned int inputBitStart, typename T>
+inline T shiftData(T input)
+{
+    META_ASSERT(inputBitCount + inputBitStart <= (sizeof(T) * 8));
+    const T mask = (1 << inputBitCount) - 1;
+    return (input & mask) << inputBitStart;
+}
+
+
+inline unsigned char average(unsigned char a, unsigned char b)
+{
+    return ((a ^ b) >> 1) + (a & b);
+}
+
+inline signed char average(signed char a, signed char b)
+{
+    return ((short)a + (short)b) / 2;
+}
+
+inline unsigned short average(unsigned short a, unsigned short b)
+{
+    return ((a ^ b) >> 1) + (a & b);
+}
+
+inline signed short average(signed short a, signed short b)
+{
+    return ((int)a + (int)b) / 2;
+}
+
+inline unsigned int average(unsigned int a, unsigned int b)
+{
+    return ((a ^ b) >> 1) + (a & b);
+}
+
+inline signed int average(signed int a, signed int b)
+{
+    return ((long long)a + (long long)b) / 2;
+}
+
+inline float average(float a, float b)
+{
+    return (a + b) * 0.5f;
+}
+
+inline unsigned short averageHalfFloat(unsigned short a, unsigned short b)
+{
+    return float32ToFloat16((float16ToFloat32(a) + float16ToFloat32(b)) * 0.5f);
+}
+
+inline unsigned int averageFloat11(unsigned int a, unsigned int b)
+{
+    return float32ToFloat11((float11ToFloat32(a) + float11ToFloat32(b)) * 0.5f);
+}
+
+inline unsigned int averageFloat10(unsigned int a, unsigned int b)
+{
+    return float32ToFloat10((float10ToFloat32(a) + float10ToFloat32(b)) * 0.5f);
+}
+
+}
+
+namespace rx
+{
+
+template <typename T>
+struct Range
+{
+    Range() {}
+    Range(T lo, T hi) : start(lo), end(hi) { ASSERT(lo <= hi); }
+
+    T start;
+    T end;
+
+    T length() const { return end - start; }
+};
+
+typedef Range<int> RangeI;
+typedef Range<unsigned int> RangeUI;
+
+template <typename T>
+T roundUp(const T value, const T alignment)
+{
+    return value + alignment - 1 - (value - 1) % alignment;
+}
+
+inline unsigned int UnsignedCeilDivide(unsigned int value, unsigned int divisor)
+{
+    unsigned int divided = value / divisor;
+    return (divided + ((value % divisor == 0) ? 0 : 1));
+}
+
+template <class T>
+inline bool IsUnsignedAdditionSafe(T lhs, T rhs)
+{
+    META_ASSERT(!std::numeric_limits<T>::is_signed);
+    return (rhs <= std::numeric_limits<T>::max() - lhs);
+}
+
+template <class T>
+inline bool IsUnsignedMultiplicationSafe(T lhs, T rhs)
+{
+    META_ASSERT(!std::numeric_limits<T>::is_signed);
+    return (lhs == T(0) || rhs == T(0) || (rhs <= std::numeric_limits<T>::max() / lhs));
+}
+
+template <class SmallIntT, class BigIntT>
+inline bool IsIntegerCastSafe(BigIntT bigValue)
+{
+    return (static_cast<BigIntT>(static_cast<SmallIntT>(bigValue)) == bigValue);
+}
+
+}
+
+#endif   // LIBGLESV2_MATHUTIL_H_
diff --git a/src/3rdparty/angle/src/common/platform.h b/src/3rdparty/angle/src/common/platform.h
new file mode 100644
index 0000000000..b53394f337
--- /dev/null
+++ b/src/3rdparty/angle/src/common/platform.h
@@ -0,0 +1,88 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// platform.h: Operating system specific includes and defines.
+
+#ifndef COMMON_PLATFORM_H_
+#define COMMON_PLATFORM_H_
+
+#if defined(_WIN32) || defined(_WIN64)
+#   define ANGLE_PLATFORM_WINDOWS 1
+#   if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_PC_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
+#      define ANGLE_PLATFORM_WINRT 1
+#   endif
+#elif defined(__APPLE__)
+#   define ANGLE_PLATFORM_APPLE 1
+#   define ANGLE_PLATFORM_POSIX 1
+#elif defined(__linux__)
+#   define ANGLE_PLATFORM_LINUX 1
+#   define ANGLE_PLATFORM_POSIX 1
+#elif defined(ANDROID)
+#   define ANGLE_PLATFORM_ANDROID 1
+#   define ANGLE_PLATFORM_POSIX 1
+#elif defined(__FreeBSD__) || \
+      defined(__OpenBSD__) || \
+      defined(__NetBSD__) || \
+      defined(__DragonFly__) || \
+      defined(__sun) || \
+      defined(__GLIBC__) || \
+      defined(__GNU__) || \
+      defined(__QNX__)
+#   define ANGLE_PLATFORM_POSIX 1
+#else
+#   error Unsupported platform.
+#endif
+
+#ifdef ANGLE_PLATFORM_WINDOWS
+#   ifndef STRICT
+#       define STRICT 1
+#   endif
+#   ifndef WIN32_LEAN_AND_MEAN
+#       define WIN32_LEAN_AND_MEAN 1
+#   endif
+#   ifndef NOMINMAX
+#       define NOMINMAX 1
+#   endif
+
+#   include <windows.h>
+#   include <intrin.h>
+
+#   if defined(ANGLE_ENABLE_D3D9) || defined(ANGLE_ENABLE_PERF)
+#       include <d3d9.h>
+#      if !defined(COMPILER_IMPLEMENTATION)
+#       include <d3dcompiler.h>
+#      endif
+#   endif
+
+#   if defined(ANGLE_ENABLE_D3D11)
+#       include <d3d10_1.h>
+#       include <d3d10.h>
+#       include <d3d11.h>
+#       include <dxgi.h>
+#      if _MSC_VER >= 1700
+#       include <dxgi1_2.h>
+#      endif
+#      if !defined(COMPILER_IMPLEMENTATION)
+#       include <d3dcompiler.h>
+#      endif
+#      if defined(__MINGW32__)
+typedef enum D3D11_MAP_FLAG
+{
+    D3D11_MAP_FLAG_DO_NOT_WAIT = 0x100000L
+} D3D11_MAP_FLAG;
+typedef struct D3D11_QUERY_DATA_SO_STATISTICS
+{
+    UINT64 NumPrimitivesWritten;
+    UINT64 PrimitivesStorageNeeded;
+} D3D11_QUERY_DATA_SO_STATISTICS;
+#      endif
+#   endif
+
+#   undef near
+#   undef far
+#endif
+
+#endif // COMMON_PLATFORM_H_
diff --git a/src/3rdparty/angle/src/common/tls.cpp b/src/3rdparty/angle/src/common/tls.cpp
new file mode 100644
index 0000000000..c46fab5303
--- /dev/null
+++ b/src/3rdparty/angle/src/common/tls.cpp
@@ -0,0 +1,103 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// tls.cpp: Simple cross-platform interface for thread local storage.
+
+#include "common/tls.h"
+
+#include <assert.h>
+
+#if defined(ANGLE_PLATFORM_WINRT)
+#include <vector>
+std::vector<void *> *tls = nullptr;
+std::vector<TLSIndex> *freeIndices = nullptr;
+#endif
+
+TLSIndex CreateTLSIndex()
+{
+    TLSIndex index;
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (!tls)
+        tls = new std::vector<void *>;
+    if (freeIndices && !freeIndices->empty()) {
+        index = freeIndices->back();
+        freeIndices->pop_back();
+        return index;
+    } else {
+        tls->push_back(nullptr);
+        return tls->size() - 1;
+    }
+#elif defined(ANGLE_PLATFORM_WINDOWS)
+    index = TlsAlloc();
+#elif defined(ANGLE_PLATFORM_POSIX)
+    // Create global pool key
+    if ((pthread_key_create(&index, NULL)) != 0)
+    {
+        index = TLS_INVALID_INDEX;
+    }
+#endif
+
+    assert(index != TLS_INVALID_INDEX && "CreateTLSIndex(): Unable to allocate Thread Local Storage");
+    return index;
+}
+
+bool DestroyTLSIndex(TLSIndex index)
+{
+    assert(index != TLS_INVALID_INDEX && "DestroyTLSIndex(): Invalid TLS Index");
+    if (index == TLS_INVALID_INDEX)
+    {
+        return false;
+    }
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (!freeIndices)
+        freeIndices = new std::vector<TLSIndex>;
+    freeIndices->push_back(index);
+    return true;
+#elif ANGLE_PLATFORM_WINDOWS
+    return (TlsFree(index) == TRUE);
+#elif defined(ANGLE_PLATFORM_POSIX)
+    return (pthread_key_delete(index) == 0);
+#endif
+}
+
+bool SetTLSValue(TLSIndex index, void *value)
+{
+    assert(index != TLS_INVALID_INDEX && "SetTLSValue(): Invalid TLS Index");
+    if (index == TLS_INVALID_INDEX)
+    {
+        return false;
+    }
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    tls->at(index) = value;
+    return true;
+#elif defined(ANGLE_PLATFORM_WINDOWS)
+    return (TlsSetValue(index, value) == TRUE);
+#elif defined(ANGLE_PLATFORM_POSIX)
+    return (pthread_setspecific(index, value) == 0);
+#endif
+}
+
+void *GetTLSValue(TLSIndex index)
+{
+#if !defined(ANGLE_PLATFORM_WINRT) // Valid on WinRT, as Alloc handles the index creation
+    assert(index != TLS_INVALID_INDEX && "GetTLSValue(): Invalid TLS Index");
+#endif
+    if (index == TLS_INVALID_INDEX)
+    {
+        return NULL;
+    }
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    return tls->at(index);
+#elif defined(ANGLE_PLATFORM_WINDOWS)
+    return TlsGetValue(index);
+#elif defined(ANGLE_PLATFORM_POSIX)
+    return pthread_getspecific(index);
+#endif
+}
diff --git a/src/3rdparty/angle/src/common/tls.h b/src/3rdparty/angle/src/common/tls.h
new file mode 100644
index 0000000000..c40ae1a061
--- /dev/null
+++ b/src/3rdparty/angle/src/common/tls.h
@@ -0,0 +1,37 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// tls.h: Simple cross-platform interface for thread local storage.
+
+#ifndef COMMON_TLS_H_
+#define COMMON_TLS_H_
+
+#include "common/platform.h"
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    typedef size_t TLSIndex;
+#   define TLS_OUT_OF_INDEXES (static_cast<TLSIndex>(-1))
+#   define TLS_INVALID_INDEX TLS_OUT_OF_INDEXES
+#elif defined(ANGLE_PLATFORM_WINDOWS)
+    typedef DWORD TLSIndex;
+#   define TLS_INVALID_INDEX (TLS_OUT_OF_INDEXES)
+#elif defined(ANGLE_PLATFORM_POSIX)
+#   include <pthread.h>
+#   include <semaphore.h>
+#   include <errno.h>
+    typedef pthread_key_t TLSIndex;
+#   define TLS_INVALID_INDEX (static_cast<TLSIndex>(-1))
+#else
+#   error Unsupported platform.
+#endif
+
+TLSIndex CreateTLSIndex();
+bool DestroyTLSIndex(TLSIndex index);
+
+bool SetTLSValue(TLSIndex index, void *value);
+void *GetTLSValue(TLSIndex index);
+
+#endif // COMMON_TLS_H_
diff --git a/src/3rdparty/angle/src/common/utilities.cpp b/src/3rdparty/angle/src/common/utilities.cpp
new file mode 100644
index 0000000000..4b8e325d22
--- /dev/null
+++ b/src/3rdparty/angle/src/common/utilities.cpp
@@ -0,0 +1,527 @@
+//
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// utilities.cpp: Conversion functions and other utility routines.
+
+#include "common/utilities.h"
+#include "common/mathutil.h"
+#include "common/platform.h"
+#if defined(ANGLE_PLATFORM_WINRT)
+#  include <locale>
+#  include <codecvt>
+#  include <wrl.h>
+#  include <windows.storage.h>
+   using namespace Microsoft::WRL;
+   using namespace ABI::Windows::Storage;
+#endif
+
+#include <set>
+
+namespace gl
+{
+
+int VariableComponentCount(GLenum type)
+{
+    return VariableRowCount(type) * VariableColumnCount(type);
+}
+
+GLenum VariableComponentType(GLenum type)
+{
+    switch(type)
+    {
+      case GL_BOOL:
+      case GL_BOOL_VEC2:
+      case GL_BOOL_VEC3:
+      case GL_BOOL_VEC4:
+        return GL_BOOL;
+      case GL_FLOAT:
+      case GL_FLOAT_VEC2:
+      case GL_FLOAT_VEC3:
+      case GL_FLOAT_VEC4:
+      case GL_FLOAT_MAT2:
+      case GL_FLOAT_MAT3:
+      case GL_FLOAT_MAT4:
+      case GL_FLOAT_MAT2x3:
+      case GL_FLOAT_MAT3x2:
+      case GL_FLOAT_MAT2x4:
+      case GL_FLOAT_MAT4x2:
+      case GL_FLOAT_MAT3x4:
+      case GL_FLOAT_MAT4x3:
+        return GL_FLOAT;
+      case GL_INT:
+      case GL_SAMPLER_2D:
+      case GL_SAMPLER_3D:
+      case GL_SAMPLER_CUBE:
+      case GL_SAMPLER_2D_ARRAY:
+      case GL_INT_SAMPLER_2D:
+      case GL_INT_SAMPLER_3D:
+      case GL_INT_SAMPLER_CUBE:
+      case GL_INT_SAMPLER_2D_ARRAY:
+      case GL_UNSIGNED_INT_SAMPLER_2D:
+      case GL_UNSIGNED_INT_SAMPLER_3D:
+      case GL_UNSIGNED_INT_SAMPLER_CUBE:
+      case GL_UNSIGNED_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_2D_SHADOW:
+      case GL_SAMPLER_CUBE_SHADOW:
+      case GL_SAMPLER_2D_ARRAY_SHADOW:
+      case GL_INT_VEC2:
+      case GL_INT_VEC3:
+      case GL_INT_VEC4:
+        return GL_INT;
+      case GL_UNSIGNED_INT:
+      case GL_UNSIGNED_INT_VEC2:
+      case GL_UNSIGNED_INT_VEC3:
+      case GL_UNSIGNED_INT_VEC4:
+        return GL_UNSIGNED_INT;
+      default:
+        UNREACHABLE();
+    }
+
+    return GL_NONE;
+}
+
+size_t VariableComponentSize(GLenum type)
+{
+    switch(type)
+    {
+      case GL_BOOL:         return sizeof(GLint);
+      case GL_FLOAT:        return sizeof(GLfloat);
+      case GL_INT:          return sizeof(GLint);
+      case GL_UNSIGNED_INT: return sizeof(GLuint);
+      default:       UNREACHABLE();
+    }
+
+    return 0;
+}
+
+size_t VariableInternalSize(GLenum type)
+{
+    // Expanded to 4-element vectors
+    return VariableComponentSize(VariableComponentType(type)) * VariableRowCount(type) * 4;
+}
+
+size_t VariableExternalSize(GLenum type)
+{
+    return VariableComponentSize(VariableComponentType(type)) * VariableComponentCount(type);
+}
+
+GLenum VariableBoolVectorType(GLenum type)
+{
+    switch (type)
+    {
+      case GL_FLOAT:
+      case GL_INT:
+      case GL_UNSIGNED_INT:
+        return GL_BOOL;
+      case GL_FLOAT_VEC2:
+      case GL_INT_VEC2:
+      case GL_UNSIGNED_INT_VEC2:
+        return GL_BOOL_VEC2;
+      case GL_FLOAT_VEC3:
+      case GL_INT_VEC3:
+      case GL_UNSIGNED_INT_VEC3:
+        return GL_BOOL_VEC3;
+      case GL_FLOAT_VEC4:
+      case GL_INT_VEC4:
+      case GL_UNSIGNED_INT_VEC4:
+        return GL_BOOL_VEC4;
+
+      default:
+        UNREACHABLE();
+        return GL_NONE;
+    }
+}
+
+int VariableRowCount(GLenum type)
+{
+    switch (type)
+    {
+      case GL_NONE:
+      case GL_STRUCT_ANGLEX:
+        return 0;
+      case GL_BOOL:
+      case GL_FLOAT:
+      case GL_INT:
+      case GL_UNSIGNED_INT:
+      case GL_BOOL_VEC2:
+      case GL_FLOAT_VEC2:
+      case GL_INT_VEC2:
+      case GL_UNSIGNED_INT_VEC2:
+      case GL_BOOL_VEC3:
+      case GL_FLOAT_VEC3:
+      case GL_INT_VEC3:
+      case GL_UNSIGNED_INT_VEC3:
+      case GL_BOOL_VEC4:
+      case GL_FLOAT_VEC4:
+      case GL_INT_VEC4:
+      case GL_UNSIGNED_INT_VEC4:
+      case GL_SAMPLER_2D:
+      case GL_SAMPLER_3D:
+      case GL_SAMPLER_CUBE:
+      case GL_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_EXTERNAL_OES:
+      case GL_SAMPLER_2D_RECT_ARB:
+      case GL_INT_SAMPLER_2D:
+      case GL_INT_SAMPLER_3D:
+      case GL_INT_SAMPLER_CUBE:
+      case GL_INT_SAMPLER_2D_ARRAY:
+      case GL_UNSIGNED_INT_SAMPLER_2D:
+      case GL_UNSIGNED_INT_SAMPLER_3D:
+      case GL_UNSIGNED_INT_SAMPLER_CUBE:
+      case GL_UNSIGNED_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_2D_SHADOW:
+      case GL_SAMPLER_CUBE_SHADOW:
+      case GL_SAMPLER_2D_ARRAY_SHADOW:
+        return 1;
+      case GL_FLOAT_MAT2:
+      case GL_FLOAT_MAT3x2:
+      case GL_FLOAT_MAT4x2:
+        return 2;
+      case GL_FLOAT_MAT3:
+      case GL_FLOAT_MAT2x3:
+      case GL_FLOAT_MAT4x3:
+        return 3;
+      case GL_FLOAT_MAT4:
+      case GL_FLOAT_MAT2x4:
+      case GL_FLOAT_MAT3x4:
+        return 4;
+      default:
+        UNREACHABLE();
+    }
+
+    return 0;
+}
+
+int VariableColumnCount(GLenum type)
+{
+    switch (type)
+    {
+      case GL_NONE:
+      case GL_STRUCT_ANGLEX:
+        return 0;
+      case GL_BOOL:
+      case GL_FLOAT:
+      case GL_INT:
+      case GL_UNSIGNED_INT:
+      case GL_SAMPLER_2D:
+      case GL_SAMPLER_3D:
+      case GL_SAMPLER_CUBE:
+      case GL_SAMPLER_2D_ARRAY:
+      case GL_INT_SAMPLER_2D:
+      case GL_INT_SAMPLER_3D:
+      case GL_INT_SAMPLER_CUBE:
+      case GL_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_EXTERNAL_OES:
+      case GL_SAMPLER_2D_RECT_ARB:
+      case GL_UNSIGNED_INT_SAMPLER_2D:
+      case GL_UNSIGNED_INT_SAMPLER_3D:
+      case GL_UNSIGNED_INT_SAMPLER_CUBE:
+      case GL_UNSIGNED_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_2D_SHADOW:
+      case GL_SAMPLER_CUBE_SHADOW:
+      case GL_SAMPLER_2D_ARRAY_SHADOW:
+        return 1;
+      case GL_BOOL_VEC2:
+      case GL_FLOAT_VEC2:
+      case GL_INT_VEC2:
+      case GL_UNSIGNED_INT_VEC2:
+      case GL_FLOAT_MAT2:
+      case GL_FLOAT_MAT2x3:
+      case GL_FLOAT_MAT2x4:
+        return 2;
+      case GL_BOOL_VEC3:
+      case GL_FLOAT_VEC3:
+      case GL_INT_VEC3:
+      case GL_UNSIGNED_INT_VEC3:
+      case GL_FLOAT_MAT3:
+      case GL_FLOAT_MAT3x2:
+      case GL_FLOAT_MAT3x4:
+        return 3;
+      case GL_BOOL_VEC4:
+      case GL_FLOAT_VEC4:
+      case GL_INT_VEC4:
+      case GL_UNSIGNED_INT_VEC4:
+      case GL_FLOAT_MAT4:
+      case GL_FLOAT_MAT4x2:
+      case GL_FLOAT_MAT4x3:
+        return 4;
+      default:
+        UNREACHABLE();
+    }
+
+    return 0;
+}
+
+bool IsSampler(GLenum type)
+{
+    switch (type)
+    {
+      case GL_SAMPLER_2D:
+      case GL_SAMPLER_3D:
+      case GL_SAMPLER_CUBE:
+      case GL_SAMPLER_2D_ARRAY:
+      case GL_INT_SAMPLER_2D:
+      case GL_INT_SAMPLER_3D:
+      case GL_INT_SAMPLER_CUBE:
+      case GL_INT_SAMPLER_2D_ARRAY:
+      case GL_UNSIGNED_INT_SAMPLER_2D:
+      case GL_UNSIGNED_INT_SAMPLER_3D:
+      case GL_UNSIGNED_INT_SAMPLER_CUBE:
+      case GL_UNSIGNED_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_2D_SHADOW:
+      case GL_SAMPLER_CUBE_SHADOW:
+      case GL_SAMPLER_2D_ARRAY_SHADOW:
+        return true;
+    }
+
+    return false;
+}
+
+bool IsMatrixType(GLenum type)
+{
+    return VariableRowCount(type) > 1;
+}
+
+GLenum TransposeMatrixType(GLenum type)
+{
+    if (!IsMatrixType(type))
+    {
+        return type;
+    }
+
+    switch (type)
+    {
+      case GL_FLOAT_MAT2:   return GL_FLOAT_MAT2;
+      case GL_FLOAT_MAT3:   return GL_FLOAT_MAT3;
+      case GL_FLOAT_MAT4:   return GL_FLOAT_MAT4;
+      case GL_FLOAT_MAT2x3: return GL_FLOAT_MAT3x2;
+      case GL_FLOAT_MAT3x2: return GL_FLOAT_MAT2x3;
+      case GL_FLOAT_MAT2x4: return GL_FLOAT_MAT4x2;
+      case GL_FLOAT_MAT4x2: return GL_FLOAT_MAT2x4;
+      case GL_FLOAT_MAT3x4: return GL_FLOAT_MAT4x3;
+      case GL_FLOAT_MAT4x3: return GL_FLOAT_MAT3x4;
+      default: UNREACHABLE(); return GL_NONE;
+    }
+}
+
+int MatrixRegisterCount(GLenum type, bool isRowMajorMatrix)
+{
+    ASSERT(IsMatrixType(type));
+    return isRowMajorMatrix ? VariableRowCount(type) : VariableColumnCount(type);
+}
+
+int MatrixComponentCount(GLenum type, bool isRowMajorMatrix)
+{
+    ASSERT(IsMatrixType(type));
+    return isRowMajorMatrix ? VariableColumnCount(type) : VariableRowCount(type);
+}
+
+int VariableRegisterCount(GLenum type)
+{
+    return IsMatrixType(type) ? VariableColumnCount(type) : 1;
+}
+
+int AllocateFirstFreeBits(unsigned int *bits, unsigned int allocationSize, unsigned int bitsSize)
+{
+    ASSERT(allocationSize <= bitsSize);
+
+    unsigned int mask = std::numeric_limits<unsigned int>::max() >> (std::numeric_limits<unsigned int>::digits - allocationSize);
+
+    for (unsigned int i = 0; i < bitsSize - allocationSize + 1; i++)
+    {
+        if ((*bits & mask) == 0)
+        {
+            *bits |= mask;
+            return i;
+        }
+
+        mask <<= 1;
+    }
+
+    return -1;
+}
+
+bool IsCubemapTextureTarget(GLenum target)
+{
+    return (target >= GL_TEXTURE_CUBE_MAP_POSITIVE_X && target <= GL_TEXTURE_CUBE_MAP_NEGATIVE_Z);
+}
+
+bool IsTriangleMode(GLenum drawMode)
+{
+    switch (drawMode)
+    {
+      case GL_TRIANGLES:
+      case GL_TRIANGLE_FAN:
+      case GL_TRIANGLE_STRIP:
+        return true;
+      case GL_POINTS:
+      case GL_LINES:
+      case GL_LINE_LOOP:
+      case GL_LINE_STRIP:
+        return false;
+      default: UNREACHABLE();
+    }
+
+    return false;
+}
+
+// [OpenGL ES SL 3.00.4] Section 11 p. 120
+// Vertex Outs/Fragment Ins packing priorities
+int VariableSortOrder(GLenum type)
+{
+    switch (type)
+    {
+      // 1. Arrays of mat4 and mat4
+      // Non-square matrices of type matCxR consume the same space as a square
+      // matrix of type matN where N is the greater of C and R
+      case GL_FLOAT_MAT4:
+      case GL_FLOAT_MAT2x4:
+      case GL_FLOAT_MAT3x4:
+      case GL_FLOAT_MAT4x2:
+      case GL_FLOAT_MAT4x3:
+        return 0;
+
+      // 2. Arrays of mat2 and mat2 (since they occupy full rows)
+      case GL_FLOAT_MAT2:
+        return 1;
+
+      // 3. Arrays of vec4 and vec4
+      case GL_FLOAT_VEC4:
+      case GL_INT_VEC4:
+      case GL_BOOL_VEC4:
+      case GL_UNSIGNED_INT_VEC4:
+        return 2;
+
+      // 4. Arrays of mat3 and mat3
+      case GL_FLOAT_MAT3:
+      case GL_FLOAT_MAT2x3:
+      case GL_FLOAT_MAT3x2:
+        return 3;
+
+      // 5. Arrays of vec3 and vec3
+      case GL_FLOAT_VEC3:
+      case GL_INT_VEC3:
+      case GL_BOOL_VEC3:
+      case GL_UNSIGNED_INT_VEC3:
+        return 4;
+
+      // 6. Arrays of vec2 and vec2
+      case GL_FLOAT_VEC2:
+      case GL_INT_VEC2:
+      case GL_BOOL_VEC2:
+      case GL_UNSIGNED_INT_VEC2:
+        return 5;
+
+      // 7. Single component types
+      case GL_FLOAT:
+      case GL_INT:
+      case GL_BOOL:
+      case GL_UNSIGNED_INT:
+      case GL_SAMPLER_2D:
+      case GL_SAMPLER_CUBE:
+      case GL_SAMPLER_EXTERNAL_OES:
+      case GL_SAMPLER_2D_RECT_ARB:
+      case GL_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_3D:
+      case GL_INT_SAMPLER_2D:
+      case GL_INT_SAMPLER_3D:
+      case GL_INT_SAMPLER_CUBE:
+      case GL_INT_SAMPLER_2D_ARRAY:
+      case GL_UNSIGNED_INT_SAMPLER_2D:
+      case GL_UNSIGNED_INT_SAMPLER_3D:
+      case GL_UNSIGNED_INT_SAMPLER_CUBE:
+      case GL_UNSIGNED_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_2D_SHADOW:
+      case GL_SAMPLER_2D_ARRAY_SHADOW:
+      case GL_SAMPLER_CUBE_SHADOW:
+        return 6;
+
+      default:
+        UNREACHABLE();
+        return 0;
+    }
+}
+
+}
+
+std::string getTempPath()
+{
+#if defined(ANGLE_PLATFORM_WINRT)
+    static std::string path;
+
+    while (path.empty())
+    {
+        ComPtr<IApplicationDataStatics> factory;
+        Wrappers::HStringReference classId(RuntimeClass_Windows_Storage_ApplicationData);
+        HRESULT result = RoGetActivationFactory(classId.Get(), IID_PPV_ARGS(&factory));
+        if (FAILED(result))
+            break;
+
+        ComPtr<IApplicationData> applicationData;
+        result = factory->get_Current(&applicationData);
+        if (FAILED(result))
+            break;
+
+        ComPtr<IStorageFolder> storageFolder;
+        result = applicationData->get_LocalFolder(&storageFolder);
+        if (FAILED(result))
+            break;
+
+        ComPtr<IStorageItem> localFolder;
+        result = storageFolder.As(&localFolder);
+        if (FAILED(result))
+            break;
+
+        HSTRING localFolderPath;
+        result = localFolder->get_Path(&localFolderPath);
+        if (FAILED(result))
+            break;
+
+        std::wstring_convert< std::codecvt_utf8<wchar_t> > converter;
+        path = converter.to_bytes(WindowsGetStringRawBuffer(localFolderPath, NULL));
+        if (path.empty())
+        {
+            UNREACHABLE();
+            break;
+        }
+    }
+
+    return path;
+#elif defined(ANGLE_PLATFORM_WINDOWS)
+    char path[MAX_PATH];
+    DWORD pathLen = GetTempPathA(sizeof(path) / sizeof(path[0]), path);
+    if (pathLen == 0)
+    {
+        UNREACHABLE();
+        return std::string();
+    }
+
+    UINT unique = GetTempFileNameA(path, "sh", 0, path);
+    if (unique == 0)
+    {
+        UNREACHABLE();
+        return std::string();
+    }
+
+    return path;
+#else
+    UNIMPLEMENTED();
+    return "";
+#endif
+}
+
+void writeFile(const char* path, const void* content, size_t size)
+{
+    FILE* file = fopen(path, "w");
+    if (!file)
+    {
+        UNREACHABLE();
+        return;
+    }
+
+    fwrite(content, sizeof(char), size, file);
+    fclose(file);
+}
diff --git a/src/3rdparty/angle/src/common/utilities.h b/src/3rdparty/angle/src/common/utilities.h
new file mode 100644
index 0000000000..a823184ecd
--- /dev/null
+++ b/src/3rdparty/angle/src/common/utilities.h
@@ -0,0 +1,52 @@
+//
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// utilities.h: Conversion functions and other utility routines.
+
+#ifndef LIBGLESV2_UTILITIES_H
+#define LIBGLESV2_UTILITIES_H
+
+#include "angle_gl.h"
+#include <string>
+#include <math.h>
+
+namespace gl
+{
+
+int VariableComponentCount(GLenum type);
+GLenum VariableComponentType(GLenum type);
+size_t VariableComponentSize(GLenum type);
+size_t VariableInternalSize(GLenum type);
+size_t VariableExternalSize(GLenum type);
+GLenum VariableBoolVectorType(GLenum type);
+int VariableRowCount(GLenum type);
+int VariableColumnCount(GLenum type);
+bool IsSampler(GLenum type);
+bool IsMatrixType(GLenum type);
+GLenum TransposeMatrixType(GLenum type);
+int VariableRegisterCount(GLenum type);
+int MatrixRegisterCount(GLenum type, bool isRowMajorMatrix);
+int MatrixComponentCount(GLenum type, bool isRowMajorMatrix);
+int VariableSortOrder(GLenum type);
+
+int AllocateFirstFreeBits(unsigned int *bits, unsigned int allocationSize, unsigned int bitsSize);
+
+bool IsCubemapTextureTarget(GLenum target);
+
+bool IsTriangleMode(GLenum drawMode);
+
+// [OpenGL ES 3.0.2] Section 2.3.1 page 14
+// Data Conversion For State-Setting Commands
+// Floating-point values are rounded to the nearest integer, instead of truncated, as done by static_cast.
+template <typename outT> outT iround(GLfloat value) { return static_cast<outT>(value > 0.0f ? floor(value + 0.5f) : ceil(value - 0.5f)); }
+template <typename outT> outT uiround(GLfloat value) { return static_cast<outT>(value + 0.5f); }
+
+}
+
+std::string getTempPath();
+void writeFile(const char* path, const void* data, size_t size);
+
+#endif  // LIBGLESV2_UTILITIES_H
diff --git a/src/3rdparty/angle/src/common/version.h b/src/3rdparty/angle/src/common/version.h
index f6ae19f541..f01e0242cb 100644
--- a/src/3rdparty/angle/src/common/version.h
+++ b/src/3rdparty/angle/src/common/version.h
@@ -1,7 +1,7 @@
-#include "commit.h"
+#include "../commit.h"
 
-#define ANGLE_MAJOR_VERSION 1
-#define ANGLE_MINOR_VERSION 3
+#define ANGLE_MAJOR_VERSION 2
+#define ANGLE_MINOR_VERSION 1
 
 #define ANGLE_STRINGIFY(x)       #x
 #define ANGLE_MACRO_STRINGIFY(x) ANGLE_STRINGIFY(x)
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.cpp b/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.cpp
index a7ce862bcb..cf60bc2349 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.cpp
@@ -16,8 +16,8 @@ Diagnostics::~Diagnostics()
 }
 
 void Diagnostics::report(ID id,
-                         const SourceLocation& loc,
-                         const std::string& text)
+                         const SourceLocation &loc,
+                         const std::string &text)
 {
     // TODO(alokp): Keep a count of errors and warnings.
     print(id, loc, text);
@@ -41,86 +41,86 @@ std::string Diagnostics::message(ID id)
     {
       // Errors begin.
       case PP_INTERNAL_ERROR:
-          return "internal error";
+        return "internal error";
       case PP_OUT_OF_MEMORY:
-          return "out of memory";
+        return "out of memory";
       case PP_INVALID_CHARACTER:
-          return "invalid character";
+        return "invalid character";
       case PP_INVALID_NUMBER:
-          return "invalid number";
+        return "invalid number";
       case PP_INTEGER_OVERFLOW:
-          return "integer overflow";
+        return "integer overflow";
       case PP_FLOAT_OVERFLOW:
-          return "float overflow";
+        return "float overflow";
       case PP_TOKEN_TOO_LONG:
-          return "token too long";
+        return "token too long";
       case PP_INVALID_EXPRESSION:
-          return "invalid expression";
+        return "invalid expression";
       case PP_DIVISION_BY_ZERO:
-          return "division by zero";
+        return "division by zero";
       case PP_EOF_IN_COMMENT:
-          return "unexpected end of file found in comment";
+        return "unexpected end of file found in comment";
       case PP_UNEXPECTED_TOKEN:
-          return "unexpected token";
+        return "unexpected token";
       case PP_DIRECTIVE_INVALID_NAME:
-          return "invalid directive name";
+        return "invalid directive name";
       case PP_MACRO_NAME_RESERVED:
-          return "macro name is reserved";
+        return "macro name is reserved";
       case PP_MACRO_REDEFINED:
-          return "macro redefined";
+        return "macro redefined";
       case PP_MACRO_PREDEFINED_REDEFINED:
-          return "predefined macro redefined";
+        return "predefined macro redefined";
       case PP_MACRO_PREDEFINED_UNDEFINED:
-          return "predefined macro undefined";
+        return "predefined macro undefined";
       case PP_MACRO_UNTERMINATED_INVOCATION:
-          return "unterminated macro invocation";
+        return "unterminated macro invocation";
       case PP_MACRO_TOO_FEW_ARGS:
-          return "Not enough arguments for macro";
+        return "Not enough arguments for macro";
       case PP_MACRO_TOO_MANY_ARGS:
-          return "Too many arguments for macro";
+        return "Too many arguments for macro";
       case PP_CONDITIONAL_ENDIF_WITHOUT_IF:
-          return "unexpected #endif found without a matching #if";
+        return "unexpected #endif found without a matching #if";
       case PP_CONDITIONAL_ELSE_WITHOUT_IF:
-          return "unexpected #else found without a matching #if";
+        return "unexpected #else found without a matching #if";
       case PP_CONDITIONAL_ELSE_AFTER_ELSE:
-          return "unexpected #else found after another #else";
+        return "unexpected #else found after another #else";
       case PP_CONDITIONAL_ELIF_WITHOUT_IF:
-          return "unexpected #elif found without a matching #if";
+        return "unexpected #elif found without a matching #if";
       case PP_CONDITIONAL_ELIF_AFTER_ELSE:
-          return "unexpected #elif found after #else";
+        return "unexpected #elif found after #else";
       case PP_CONDITIONAL_UNTERMINATED:
-          return "unexpected end of file found in conditional block";
+        return "unexpected end of file found in conditional block";
       case PP_INVALID_EXTENSION_NAME:
-          return "invalid extension name";
+        return "invalid extension name";
       case PP_INVALID_EXTENSION_BEHAVIOR:
-          return "invalid extension behavior";
+        return "invalid extension behavior";
       case PP_INVALID_EXTENSION_DIRECTIVE:
-          return "invalid extension directive";
+        return "invalid extension directive";
       case PP_INVALID_VERSION_NUMBER:
-          return "invalid version number";
+        return "invalid version number";
       case PP_INVALID_VERSION_DIRECTIVE:
-          return "invalid version directive";
+        return "invalid version directive";
       case PP_VERSION_NOT_FIRST_STATEMENT:
         return "#version directive must occur before anything else, "
                "except for comments and white space";
       case PP_INVALID_LINE_NUMBER:
-          return "invalid line number";
+        return "invalid line number";
       case PP_INVALID_FILE_NUMBER:
-          return "invalid file number";
+        return "invalid file number";
       case PP_INVALID_LINE_DIRECTIVE:
-          return "invalid line directive";
+        return "invalid line directive";
       // Errors end.
       // Warnings begin.
       case PP_EOF_IN_DIRECTIVE:
-          return "unexpected end of file found in directive";
+        return "unexpected end of file found in directive";
       case PP_CONDITIONAL_UNEXPECTED_TOKEN:
-          return "unexpected token after conditional expression";
+        return "unexpected token after conditional expression";
       case PP_UNRECOGNIZED_PRAGMA:
-          return "unrecognized pragma";
+        return "unrecognized pragma";
       // Warnings end.
       default:
-          assert(false);
-          return "";
+        assert(false);
+        return "";
     }
 }
 
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.h b/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.h
index 2c8c539137..a7587ed657 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/DiagnosticsBase.h
@@ -72,15 +72,15 @@ class Diagnostics
 
     virtual ~Diagnostics();
 
-    void report(ID id, const SourceLocation& loc, const std::string& text);
+    void report(ID id, const SourceLocation &loc, const std::string &text);
 
   protected:
     Severity severity(ID id);
     std::string message(ID id);
 
     virtual void print(ID id,
-                       const SourceLocation& loc,
-                       const std::string& text) = 0;
+                       const SourceLocation &loc,
+                       const std::string &text) = 0;
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/DirectiveHandlerBase.h b/src/3rdparty/angle/src/compiler/preprocessor/DirectiveHandlerBase.h
index 2aaeec2818..040b25c6a2 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/DirectiveHandlerBase.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/DirectiveHandlerBase.h
@@ -23,19 +23,19 @@ class DirectiveHandler
   public:
     virtual ~DirectiveHandler();
 
-    virtual void handleError(const SourceLocation& loc,
-                             const std::string& msg) = 0;
+    virtual void handleError(const SourceLocation &loc,
+                             const std::string &msg) = 0;
 
     // Handle pragma of form: #pragma name[(value)]
-    virtual void handlePragma(const SourceLocation& loc,
-                              const std::string& name,
-                              const std::string& value) = 0;
+    virtual void handlePragma(const SourceLocation &loc,
+                              const std::string &name,
+                              const std::string &value) = 0;
 
-    virtual void handleExtension(const SourceLocation& loc,
-                                 const std::string& name,
-                                 const std::string& behavior) = 0;
+    virtual void handleExtension(const SourceLocation &loc,
+                                 const std::string &name,
+                                 const std::string &behavior) = 0;
 
-    virtual void handleVersion(const SourceLocation& loc,
+    virtual void handleVersion(const SourceLocation &loc,
                                int version) = 0;
 };
 
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.cpp b/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.cpp
index ebec79804d..6434d5cb5c 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2011-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -35,9 +35,8 @@ enum DirectiveType
     DIRECTIVE_VERSION,
     DIRECTIVE_LINE
 };
-}  // namespace
 
-static DirectiveType getDirective(const pp::Token* token)
+DirectiveType getDirective(const pp::Token *token)
 {
     static const std::string kDirectiveDefine("define");
     static const std::string kDirectiveUndef("undef");
@@ -58,35 +57,35 @@ static DirectiveType getDirective(const pp::Token* token)
 
     if (token->text == kDirectiveDefine)
         return DIRECTIVE_DEFINE;
-    else if (token->text == kDirectiveUndef)
+    if (token->text == kDirectiveUndef)
         return DIRECTIVE_UNDEF;
-    else if (token->text == kDirectiveIf)
+    if (token->text == kDirectiveIf)
         return DIRECTIVE_IF;
-    else if (token->text == kDirectiveIfdef)
+    if (token->text == kDirectiveIfdef)
         return DIRECTIVE_IFDEF;
-    else if (token->text == kDirectiveIfndef)
+    if (token->text == kDirectiveIfndef)
         return DIRECTIVE_IFNDEF;
-    else if (token->text == kDirectiveElse)
+    if (token->text == kDirectiveElse)
         return DIRECTIVE_ELSE;
-    else if (token->text == kDirectiveElif)
+    if (token->text == kDirectiveElif)
         return DIRECTIVE_ELIF;
-    else if (token->text == kDirectiveEndif)
+    if (token->text == kDirectiveEndif)
         return DIRECTIVE_ENDIF;
-    else if (token->text == kDirectiveError)
+    if (token->text == kDirectiveError)
         return DIRECTIVE_ERROR;
-    else if (token->text == kDirectivePragma)
+    if (token->text == kDirectivePragma)
         return DIRECTIVE_PRAGMA;
-    else if (token->text == kDirectiveExtension)
+    if (token->text == kDirectiveExtension)
         return DIRECTIVE_EXTENSION;
-    else if (token->text == kDirectiveVersion)
+    if (token->text == kDirectiveVersion)
         return DIRECTIVE_VERSION;
-    else if (token->text == kDirectiveLine)
+    if (token->text == kDirectiveLine)
         return DIRECTIVE_LINE;
 
     return DIRECTIVE_NONE;
 }
 
-static bool isConditionalDirective(DirectiveType directive)
+bool isConditionalDirective(DirectiveType directive)
 {
     switch (directive)
     {
@@ -103,12 +102,12 @@ static bool isConditionalDirective(DirectiveType directive)
 }
 
 // Returns true if the token represents End Of Directive.
-static bool isEOD(const pp::Token* token)
+bool isEOD(const pp::Token *token)
 {
     return (token->type == '\n') || (token->type == pp::Token::LAST);
 }
 
-static void skipUntilEOD(pp::Lexer* lexer, pp::Token* token)
+void skipUntilEOD(pp::Lexer *lexer, pp::Token *token)
 {
     while(!isEOD(token))
     {
@@ -116,7 +115,7 @@ static void skipUntilEOD(pp::Lexer* lexer, pp::Token* token)
     }
 }
 
-static bool isMacroNameReserved(const std::string& name)
+bool isMacroNameReserved(const std::string &name)
 {
     // Names prefixed with "GL_" are reserved.
     if (name.substr(0, 3) == "GL_")
@@ -129,30 +128,32 @@ static bool isMacroNameReserved(const std::string& name)
     return false;
 }
 
-static bool isMacroPredefined(const std::string& name,
-                              const pp::MacroSet& macroSet)
+bool isMacroPredefined(const std::string &name,
+                       const pp::MacroSet &macroSet)
 {
     pp::MacroSet::const_iterator iter = macroSet.find(name);
     return iter != macroSet.end() ? iter->second.predefined : false;
 }
 
+}  // namespace anonymous
+
 namespace pp
 {
 
 class DefinedParser : public Lexer
 {
   public:
-    DefinedParser(Lexer* lexer,
-                  const MacroSet* macroSet,
-                  Diagnostics* diagnostics) :
-        mLexer(lexer),
-        mMacroSet(macroSet),
-        mDiagnostics(diagnostics)
+    DefinedParser(Lexer *lexer,
+                  const MacroSet *macroSet,
+                  Diagnostics *diagnostics)
+        : mLexer(lexer),
+          mMacroSet(macroSet),
+          mDiagnostics(diagnostics)
     {
     }
 
   protected:
-    virtual void lex(Token* token)
+    virtual void lex(Token *token)
     {
         static const std::string kDefined("defined");
 
@@ -199,24 +200,24 @@ class DefinedParser : public Lexer
     }
 
   private:
-    Lexer* mLexer;
-    const MacroSet* mMacroSet;
-    Diagnostics* mDiagnostics;
+    Lexer *mLexer;
+    const MacroSet *mMacroSet;
+    Diagnostics *mDiagnostics;
 };
 
-DirectiveParser::DirectiveParser(Tokenizer* tokenizer,
-                                 MacroSet* macroSet,
-                                 Diagnostics* diagnostics,
-                                 DirectiveHandler* directiveHandler) :
-    mPastFirstStatement(false),
-    mTokenizer(tokenizer),
-    mMacroSet(macroSet),
-    mDiagnostics(diagnostics),
-    mDirectiveHandler(directiveHandler)
+DirectiveParser::DirectiveParser(Tokenizer *tokenizer,
+                                 MacroSet *macroSet,
+                                 Diagnostics *diagnostics,
+                                 DirectiveHandler *directiveHandler)
+    : mPastFirstStatement(false),
+      mTokenizer(tokenizer),
+      mMacroSet(macroSet),
+      mDiagnostics(diagnostics),
+      mDirectiveHandler(directiveHandler)
 {
 }
 
-void DirectiveParser::lex(Token* token)
+void DirectiveParser::lex(Token *token)
 {
     do
     {
@@ -232,19 +233,20 @@ void DirectiveParser::lex(Token* token)
         {
             if (!mConditionalStack.empty())
             {
-                const ConditionalBlock& block = mConditionalStack.back();
+                const ConditionalBlock &block = mConditionalStack.back();
                 mDiagnostics->report(Diagnostics::PP_CONDITIONAL_UNTERMINATED,
                                      block.location, block.type);
             }
             break;
         }
 
-    } while (skipping() || (token->type == '\n'));
+    }
+    while (skipping() || (token->type == '\n'));
 
     mPastFirstStatement = true;
 }
 
-void DirectiveParser::parseDirective(Token* token)
+void DirectiveParser::parseDirective(Token *token)
 {
     assert(token->type == Token::PP_HASH);
 
@@ -324,7 +326,7 @@ void DirectiveParser::parseDirective(Token* token)
     }
 }
 
-void DirectiveParser::parseDefine(Token* token)
+void DirectiveParser::parseDefine(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_DEFINE);
 
@@ -357,14 +359,16 @@ void DirectiveParser::parseDefine(Token* token)
     {
         // Function-like macro. Collect arguments.
         macro.type = Macro::kTypeFunc;
-        do {
+        do
+        {
             mTokenizer->lex(token);
             if (token->type != Token::IDENTIFIER)
                 break;
             macro.parameters.push_back(token->text);
 
             mTokenizer->lex(token);  // Get ','.
-        } while (token->type == ',');
+        }
+        while (token->type == ',');
 
         if (token->type != ')')
         {
@@ -404,7 +408,7 @@ void DirectiveParser::parseDefine(Token* token)
     mMacroSet->insert(std::make_pair(macro.name, macro));
 }
 
-void DirectiveParser::parseUndef(Token* token)
+void DirectiveParser::parseUndef(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_UNDEF);
 
@@ -433,25 +437,25 @@ void DirectiveParser::parseUndef(Token* token)
     mTokenizer->lex(token);
 }
 
-void DirectiveParser::parseIf(Token* token)
+void DirectiveParser::parseIf(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_IF);
     parseConditionalIf(token);
 }
 
-void DirectiveParser::parseIfdef(Token* token)
+void DirectiveParser::parseIfdef(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_IFDEF);
     parseConditionalIf(token);
 }
 
-void DirectiveParser::parseIfndef(Token* token)
+void DirectiveParser::parseIfndef(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_IFNDEF);
     parseConditionalIf(token);
 }
 
-void DirectiveParser::parseElse(Token* token)
+void DirectiveParser::parseElse(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_ELSE);
 
@@ -463,7 +467,7 @@ void DirectiveParser::parseElse(Token* token)
         return;
     }
 
-    ConditionalBlock& block = mConditionalStack.back();
+    ConditionalBlock &block = mConditionalStack.back();
     if (block.skipBlock)
     {
         // No diagnostics. Just skip the whole line.
@@ -492,7 +496,7 @@ void DirectiveParser::parseElse(Token* token)
     }
 }
 
-void DirectiveParser::parseElif(Token* token)
+void DirectiveParser::parseElif(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_ELIF);
 
@@ -504,7 +508,7 @@ void DirectiveParser::parseElif(Token* token)
         return;
     }
 
-    ConditionalBlock& block = mConditionalStack.back();
+    ConditionalBlock &block = mConditionalStack.back();
     if (block.skipBlock)
     {
         // No diagnostics. Just skip the whole line.
@@ -532,7 +536,7 @@ void DirectiveParser::parseElif(Token* token)
     block.foundValidGroup = expression != 0;
 }
 
-void DirectiveParser::parseEndif(Token* token)
+void DirectiveParser::parseEndif(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_ENDIF);
 
@@ -556,7 +560,7 @@ void DirectiveParser::parseEndif(Token* token)
     }
 }
 
-void DirectiveParser::parseError(Token* token)
+void DirectiveParser::parseError(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_ERROR);
 
@@ -571,7 +575,7 @@ void DirectiveParser::parseError(Token* token)
 }
 
 // Parses pragma of form: #pragma name[(value)].
-void DirectiveParser::parsePragma(Token* token)
+void DirectiveParser::parsePragma(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_PRAGMA);
 
@@ -627,7 +631,7 @@ void DirectiveParser::parsePragma(Token* token)
     }
 }
 
-void DirectiveParser::parseExtension(Token* token)
+void DirectiveParser::parseExtension(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_EXTENSION);
 
@@ -694,7 +698,7 @@ void DirectiveParser::parseExtension(Token* token)
         mDirectiveHandler->handleExtension(token->location, name, behavior);
 }
 
-void DirectiveParser::parseVersion(Token* token)
+void DirectiveParser::parseVersion(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_VERSION);
 
@@ -708,7 +712,9 @@ void DirectiveParser::parseVersion(Token* token)
 
     enum State
     {
-        VERSION_NUMBER
+        VERSION_NUMBER,
+        VERSION_PROFILE,
+        VERSION_ENDLINE
     };
 
     bool valid = true;
@@ -716,12 +722,12 @@ void DirectiveParser::parseVersion(Token* token)
     int state = VERSION_NUMBER;
 
     mTokenizer->lex(token);
-    while ((token->type != '\n') && (token->type != Token::LAST))
+    while (valid && (token->type != '\n') && (token->type != Token::LAST))
     {
-        switch (state++)
+        switch (state)
         {
           case VERSION_NUMBER:
-            if (valid && (token->type != Token::CONST_INT))
+            if (token->type != Token::CONST_INT)
             {
                 mDiagnostics->report(Diagnostics::PP_INVALID_VERSION_NUMBER,
                                      token->location, token->text);
@@ -733,29 +739,44 @@ void DirectiveParser::parseVersion(Token* token)
                                      token->location, token->text);
                 valid = false;
             }
-            break;
-          default:
             if (valid)
             {
-                mDiagnostics->report(Diagnostics::PP_UNEXPECTED_TOKEN,
+                state = (version < 300) ? VERSION_ENDLINE : VERSION_PROFILE;
+            }
+            break;
+          case VERSION_PROFILE:
+            if (token->type != Token::IDENTIFIER || token->text != "es")
+            {
+                mDiagnostics->report(Diagnostics::PP_INVALID_VERSION_DIRECTIVE,
                                      token->location, token->text);
                 valid = false;
             }
+            state = VERSION_ENDLINE;
+            break;
+          default:
+            mDiagnostics->report(Diagnostics::PP_UNEXPECTED_TOKEN,
+                                 token->location, token->text);
+            valid = false;
             break;
         }
+
         mTokenizer->lex(token);
     }
-    if (valid && (state != VERSION_NUMBER + 1))
+
+    if (valid && (state != VERSION_ENDLINE))
     {
         mDiagnostics->report(Diagnostics::PP_INVALID_VERSION_DIRECTIVE,
                              token->location, token->text);
         valid = false;
     }
+
     if (valid)
+    {
         mDirectiveHandler->handleVersion(token->location, version);
+    }
 }
 
-void DirectiveParser::parseLine(Token* token)
+void DirectiveParser::parseLine(Token *token)
 {
     assert(getDirective(token) == DIRECTIVE_LINE);
 
@@ -824,19 +845,21 @@ void DirectiveParser::parseLine(Token* token)
     if (valid)
     {
         mTokenizer->setLineNumber(line);
-        if (state == FILE_NUMBER + 1) mTokenizer->setFileNumber(file);
+        if (state == FILE_NUMBER + 1)
+            mTokenizer->setFileNumber(file);
     }
 }
 
 bool DirectiveParser::skipping() const
 {
-    if (mConditionalStack.empty()) return false;
+    if (mConditionalStack.empty())
+        return false;
 
     const ConditionalBlock& block = mConditionalStack.back();
     return block.skipBlock || block.skipGroup;
 }
 
-void DirectiveParser::parseConditionalIf(Token* token)
+void DirectiveParser::parseConditionalIf(Token *token)
 {
     ConditionalBlock block;
     block.type = token->text;
@@ -877,7 +900,7 @@ void DirectiveParser::parseConditionalIf(Token* token)
     mConditionalStack.push_back(block);
 }
 
-int DirectiveParser::parseExpressionIf(Token* token)
+int DirectiveParser::parseExpressionIf(Token *token)
 {
     assert((getDirective(token) == DIRECTIVE_IF) ||
            (getDirective(token) == DIRECTIVE_ELIF));
@@ -901,7 +924,7 @@ int DirectiveParser::parseExpressionIf(Token* token)
     return expression;
 }
 
-int DirectiveParser::parseExpressionIfdef(Token* token)
+int DirectiveParser::parseExpressionIfdef(Token *token)
 {
     assert((getDirective(token) == DIRECTIVE_IFDEF) ||
            (getDirective(token) == DIRECTIVE_IFNDEF));
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.h b/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.h
index 8a7f0072ba..335091781c 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/DirectiveParser.h
@@ -22,35 +22,35 @@ class Tokenizer;
 class DirectiveParser : public Lexer
 {
   public:
-    DirectiveParser(Tokenizer* tokenizer,
-                    MacroSet* macroSet,
-                    Diagnostics* diagnostics,
-                    DirectiveHandler* directiveHandler);
+    DirectiveParser(Tokenizer *tokenizer,
+                    MacroSet *macroSet,
+                    Diagnostics *diagnostics,
+                    DirectiveHandler *directiveHandler);
 
-    virtual void lex(Token* token);
+    virtual void lex(Token *token);
 
   private:
     PP_DISALLOW_COPY_AND_ASSIGN(DirectiveParser);
 
-    void parseDirective(Token* token);
-    void parseDefine(Token* token);
-    void parseUndef(Token* token);
-    void parseIf(Token* token);
-    void parseIfdef(Token* token);
-    void parseIfndef(Token* token);
-    void parseElse(Token* token);
-    void parseElif(Token* token);
-    void parseEndif(Token* token);
-    void parseError(Token* token);
-    void parsePragma(Token* token);
-    void parseExtension(Token* token);
-    void parseVersion(Token* token);
-    void parseLine(Token* token);
+    void parseDirective(Token *token);
+    void parseDefine(Token *token);
+    void parseUndef(Token *token);
+    void parseIf(Token *token);
+    void parseIfdef(Token *token);
+    void parseIfndef(Token *token);
+    void parseElse(Token *token);
+    void parseElif(Token *token);
+    void parseEndif(Token *token);
+    void parseError(Token *token);
+    void parsePragma(Token *token);
+    void parseExtension(Token *token);
+    void parseVersion(Token *token);
+    void parseLine(Token *token);
 
     bool skipping() const;
-    void parseConditionalIf(Token* token);
-    int parseExpressionIf(Token* token);
-    int parseExpressionIfdef(Token* token);
+    void parseConditionalIf(Token *token);
+    int parseExpressionIf(Token *token);
+    int parseExpressionIfdef(Token *token);
 
     struct ConditionalBlock
     {
@@ -61,20 +61,20 @@ class DirectiveParser : public Lexer
         bool foundValidGroup;
         bool foundElseGroup;
 
-        ConditionalBlock() :
-            skipBlock(false),
-            skipGroup(false),
-            foundValidGroup(false),
-            foundElseGroup(false)
+        ConditionalBlock()
+            : skipBlock(false),
+              skipGroup(false),
+              foundValidGroup(false),
+              foundElseGroup(false)
         {
         }
     };
     bool mPastFirstStatement;
     std::vector<ConditionalBlock> mConditionalStack;
-    Tokenizer* mTokenizer;
-    MacroSet* mMacroSet;
-    Diagnostics* mDiagnostics;
-    DirectiveHandler* mDirectiveHandler;
+    Tokenizer *mTokenizer;
+    MacroSet *mMacroSet;
+    Diagnostics *mDiagnostics;
+    DirectiveHandler *mDirectiveHandler;
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.h b/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.h
index 092d059413..f040cb01fa 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.h
@@ -19,15 +19,15 @@ struct Token;
 class ExpressionParser
 {
   public:
-    ExpressionParser(Lexer* lexer, Diagnostics* diagnostics);
+    ExpressionParser(Lexer *lexer, Diagnostics *diagnostics);
 
-    bool parse(Token* token, int* result);
+    bool parse(Token *token, int *result);
 
   private:
     PP_DISALLOW_COPY_AND_ASSIGN(ExpressionParser);
 
-    Lexer* mLexer;
-    Diagnostics* mDiagnostics;
+    Lexer *mLexer;
+    Diagnostics *mDiagnostics;
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.y b/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.y
index 9fa0f0bf80..662a31b650 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.y
+++ b/src/3rdparty/angle/src/compiler/preprocessor/ExpressionParser.y
@@ -195,15 +195,14 @@ expression
 
 %%
 
-int yylex(YYSTYPE* lvalp, Context* context)
+int yylex(YYSTYPE *lvalp, Context *context)
 {
     int type = 0;
 
-    pp::Token* token = context->token;
+    pp::Token *token = context->token;
     switch (token->type)
     {
-      case pp::Token::CONST_INT:
-      {
+      case pp::Token::CONST_INT: {
         unsigned int val = 0;
         if (!token->uValue(&val))
         {
@@ -214,39 +213,59 @@ int yylex(YYSTYPE* lvalp, Context* context)
         type = TOK_CONST_INT;
         break;
       }
-      case pp::Token::OP_OR: type = TOK_OP_OR; break;
-      case pp::Token::OP_AND: type = TOK_OP_AND; break;
-      case pp::Token::OP_NE: type = TOK_OP_NE; break;
-      case pp::Token::OP_EQ: type = TOK_OP_EQ; break;
-      case pp::Token::OP_GE: type = TOK_OP_GE; break;
-      case pp::Token::OP_LE: type = TOK_OP_LE; break;
-      case pp::Token::OP_RIGHT: type = TOK_OP_RIGHT; break;
-      case pp::Token::OP_LEFT: type = TOK_OP_LEFT; break;
-      case '|': type = '|'; break;
-      case '^': type = '^'; break;
-      case '&': type = '&'; break;
-      case '>': type = '>'; break;
-      case '<': type = '<'; break;
-      case '-': type = '-'; break;
-      case '+': type = '+'; break;
-      case '%': type = '%'; break;
-      case '/': type = '/'; break;
-      case '*': type = '*'; break;
-      case '!': type = '!'; break;
-      case '~': type = '~'; break;
-      case '(': type = '('; break;
-      case ')': type = ')'; break;
+      case pp::Token::OP_OR:
+        type = TOK_OP_OR;
+        break;
+      case pp::Token::OP_AND:
+        type = TOK_OP_AND;
+        break;
+      case pp::Token::OP_NE:
+        type = TOK_OP_NE;
+        break;
+      case pp::Token::OP_EQ:
+        type = TOK_OP_EQ;
+        break;
+      case pp::Token::OP_GE:
+        type = TOK_OP_GE;
+        break;
+      case pp::Token::OP_LE:
+        type = TOK_OP_LE;
+        break;
+      case pp::Token::OP_RIGHT:
+        type = TOK_OP_RIGHT;
+        break;
+      case pp::Token::OP_LEFT:
+        type = TOK_OP_LEFT;
+        break;
+      case '|':
+      case '^':
+      case '&':
+      case '>':
+      case '<':
+      case '-':
+      case '+':
+      case '%':
+      case '/':
+      case '*':
+      case '!':
+      case '~':
+      case '(':
+      case ')':
+        type = token->type;
+        break;
 
-      default: break;
+      default:
+        break;
     }
 
     // Advance to the next token if the current one is valid.
-    if (type != 0) context->lexer->lex(token);
+    if (type != 0)
+        context->lexer->lex(token);
 
     return type;
 }
 
-void yyerror(Context* context, const char* reason)
+void yyerror(Context *context, const char *reason)
 {
     context->diagnostics->report(pp::Diagnostics::PP_INVALID_EXPRESSION,
                                  context->token->location,
@@ -255,13 +274,13 @@ void yyerror(Context* context, const char* reason)
 
 namespace pp {
 
-ExpressionParser::ExpressionParser(Lexer* lexer, Diagnostics* diagnostics) :
-    mLexer(lexer),
-    mDiagnostics(diagnostics)
+ExpressionParser::ExpressionParser(Lexer *lexer, Diagnostics *diagnostics)
+    : mLexer(lexer),
+      mDiagnostics(diagnostics)
 {
 }
 
-bool ExpressionParser::parse(Token* token, int* result)
+bool ExpressionParser::parse(Token *token, int *result)
 {
     Context context;
     context.diagnostics = mDiagnostics;
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Input.cpp b/src/3rdparty/angle/src/compiler/preprocessor/Input.cpp
index b4d970a97d..f9910a6cc3 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Input.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Input.cpp
@@ -17,7 +17,7 @@ Input::Input() : mCount(0), mString(0)
 {
 }
 
-Input::Input(size_t count, const char* const string[], const int length[]) :
+Input::Input(size_t count, const char *const string[], const int length[]) :
     mCount(count),
     mString(string)
 {
@@ -29,7 +29,7 @@ Input::Input(size_t count, const char* const string[], const int length[]) :
     }
 }
 
-size_t Input::read(char* buf, size_t maxSize)
+size_t Input::read(char *buf, size_t maxSize)
 {
     size_t nRead = 0;
     while ((nRead < maxSize) && (mReadLoc.sIndex < mCount))
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Input.h b/src/3rdparty/angle/src/compiler/preprocessor/Input.h
index 14b7597cb4..2ac4f0c170 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Input.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Input.h
@@ -18,27 +18,40 @@ class Input
 {
   public:
     Input();
-    Input(size_t count, const char* const string[], const int length[]);
+    Input(size_t count, const char *const string[], const int length[]);
 
-    size_t count() const { return mCount; }
-    const char* string(size_t index) const { return mString[index]; }
-    size_t length(size_t index) const { return mLength[index]; }
+    size_t count() const
+    {
+        return mCount;
+    }
+    const char *string(size_t index) const
+    {
+        return mString[index];
+    }
+    size_t length(size_t index) const
+    {
+        return mLength[index];
+    }
 
-    size_t read(char* buf, size_t maxSize);
+    size_t read(char *buf, size_t maxSize);
 
     struct Location
     {
         size_t sIndex;  // String index;
         size_t cIndex;  // Char index.
 
-        Location() : sIndex(0), cIndex(0) { }
+        Location()
+            : sIndex(0),
+              cIndex(0)
+        {
+        }
     };
-    const Location& readLoc() const { return mReadLoc; }
+    const Location &readLoc() const { return mReadLoc; }
 
   private:
     // Input.
     size_t mCount;
-    const char* const* mString;
+    const char * const *mString;
     std::vector<size_t> mLength;
 
     Location mReadLoc;
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Lexer.h b/src/3rdparty/angle/src/compiler/preprocessor/Lexer.h
index eb85cea873..d42d3db7e0 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Lexer.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Lexer.h
@@ -17,7 +17,7 @@ class Lexer
   public:
     virtual ~Lexer();
 
-    virtual void lex(Token* token) = 0;
+    virtual void lex(Token *token) = 0;
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Macro.cpp b/src/3rdparty/angle/src/compiler/preprocessor/Macro.cpp
index b2e3088e32..13cb14e3dc 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Macro.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Macro.cpp
@@ -11,7 +11,7 @@
 namespace pp
 {
 
-bool Macro::equals(const Macro& other) const
+bool Macro::equals(const Macro &other) const
 {
     return (type == other.type) &&
            (name == other.name) &&
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Macro.h b/src/3rdparty/angle/src/compiler/preprocessor/Macro.h
index 7ec0149116..b77e7bc15c 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Macro.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Macro.h
@@ -26,8 +26,13 @@ struct Macro
     typedef std::vector<std::string> Parameters;
     typedef std::vector<Token> Replacements;
 
-    Macro() : predefined(false), disabled(false), type(kTypeObj) { }
-    bool equals(const Macro& other) const;
+    Macro()
+        : predefined(false),
+          disabled(false),
+          type(kTypeObj)
+    {
+    }
+    bool equals(const Macro &other) const;
 
     bool predefined;
     mutable bool disabled;
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.cpp b/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.cpp
index b789260af9..d7e0c83465 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.cpp
@@ -20,13 +20,13 @@ class TokenLexer : public Lexer
  public:
     typedef std::vector<Token> TokenVector;
 
-    TokenLexer(TokenVector* tokens)
+    TokenLexer(TokenVector *tokens)
     {
         tokens->swap(mTokens);
         mIter = mTokens.begin();
     }
 
-    virtual void lex(Token* token)
+    virtual void lex(Token *token)
     {
         if (mIter == mTokens.end())
         {
@@ -46,12 +46,12 @@ class TokenLexer : public Lexer
     TokenVector::const_iterator mIter;
 };
 
-MacroExpander::MacroExpander(Lexer* lexer,
-                             MacroSet* macroSet,
-                             Diagnostics* diagnostics) :
-    mLexer(lexer),
-    mMacroSet(macroSet),
-    mDiagnostics(diagnostics)
+MacroExpander::MacroExpander(Lexer *lexer,
+                             MacroSet *macroSet,
+                             Diagnostics *diagnostics)
+    : mLexer(lexer),
+      mMacroSet(macroSet),
+      mDiagnostics(diagnostics)
 {
 }
 
@@ -63,7 +63,7 @@ MacroExpander::~MacroExpander()
     }
 }
 
-void MacroExpander::lex(Token* token)
+void MacroExpander::lex(Token *token)
 {
     while (true)
     {
@@ -97,7 +97,7 @@ void MacroExpander::lex(Token* token)
     }
 }
 
-void MacroExpander::getToken(Token* token)
+void MacroExpander::getToken(Token *token)
 {
     if (mReserveToken.get())
     {
@@ -122,11 +122,11 @@ void MacroExpander::getToken(Token* token)
     }
 }
 
-void MacroExpander::ungetToken(const Token& token)
+void MacroExpander::ungetToken(const Token &token)
 {
     if (!mContextStack.empty())
     {
-        MacroContext* context = mContextStack.back();
+        MacroContext *context = mContextStack.back();
         context->unget();
         assert(context->replacements[context->index] == token);
     }
@@ -148,7 +148,7 @@ bool MacroExpander::isNextTokenLeftParen()
     return lparen;
 }
 
-bool MacroExpander::pushMacro(const Macro& macro, const Token& identifier)
+bool MacroExpander::pushMacro(const Macro &macro, const Token &identifier)
 {
     assert(!macro.disabled);
     assert(!identifier.expansionDisabled());
@@ -162,7 +162,7 @@ bool MacroExpander::pushMacro(const Macro& macro, const Token& identifier)
     // Macro is disabled for expansion until it is popped off the stack.
     macro.disabled = true;
 
-    MacroContext* context = new MacroContext;
+    MacroContext *context = new MacroContext;
     context->macro = &macro;
     context->replacements.swap(replacements);
     mContextStack.push_back(context);
@@ -173,7 +173,7 @@ void MacroExpander::popMacro()
 {
     assert(!mContextStack.empty());
 
-    MacroContext* context = mContextStack.back();
+    MacroContext *context = mContextStack.back();
     mContextStack.pop_back();
 
     assert(context->empty());
@@ -182,9 +182,9 @@ void MacroExpander::popMacro()
     delete context;
 }
 
-bool MacroExpander::expandMacro(const Macro& macro,
-                                const Token& identifier,
-                                std::vector<Token>* replacements)
+bool MacroExpander::expandMacro(const Macro &macro,
+                                const Token &identifier,
+                                std::vector<Token> *replacements)
 {
     replacements->clear();
     if (macro.type == Macro::kTypeObj)
@@ -239,9 +239,9 @@ bool MacroExpander::expandMacro(const Macro& macro,
     return true;
 }
 
-bool MacroExpander::collectMacroArgs(const Macro& macro,
-                                     const Token& identifier,
-                                     std::vector<MacroArg>* args)
+bool MacroExpander::collectMacroArgs(const Macro &macro,
+                                     const Token &identifier,
+                                     std::vector<MacroArg> *args)
 {
     Token token;
     getToken(&token);
@@ -276,7 +276,8 @@ bool MacroExpander::collectMacroArgs(const Macro& macro,
             // The individual arguments are separated by comma tokens, but
             // the comma tokens between matching inner parentheses do not
             // seperate arguments.
-            if (openParens == 1) args->push_back(MacroArg());
+            if (openParens == 1)
+                args->push_back(MacroArg());
             isArg = openParens != 1;
             break;
           default:
@@ -285,14 +286,15 @@ bool MacroExpander::collectMacroArgs(const Macro& macro,
         }
         if (isArg)
         {
-            MacroArg& arg = args->back();
+            MacroArg &arg = args->back();
             // Initial whitespace is not part of the argument.
-            if (arg.empty()) token.setHasLeadingSpace(false);
+            if (arg.empty())
+                token.setHasLeadingSpace(false);
             arg.push_back(token);
         }
     }
 
-    const Macro::Parameters& params = macro.parameters;
+    const Macro::Parameters &params = macro.parameters;
     // If there is only one empty argument, it is equivalent to no argument.
     if (params.empty() && (args->size() == 1) && args->front().empty())
     {
@@ -313,7 +315,7 @@ bool MacroExpander::collectMacroArgs(const Macro& macro,
     // inserted into the macro body.
     for (std::size_t i = 0; i < args->size(); ++i)
     {
-        MacroArg& arg = args->at(i);
+        MacroArg &arg = args->at(i);
         TokenLexer lexer(&arg);
         MacroExpander expander(&lexer, mMacroSet, mDiagnostics);
 
@@ -328,13 +330,13 @@ bool MacroExpander::collectMacroArgs(const Macro& macro,
     return true;
 }
 
-void MacroExpander::replaceMacroParams(const Macro& macro,
-                                       const std::vector<MacroArg>& args,
-                                       std::vector<Token>* replacements)
+void MacroExpander::replaceMacroParams(const Macro &macro,
+                                       const std::vector<MacroArg> &args,
+                                       std::vector<Token> *replacements)
 {
     for (std::size_t i = 0; i < macro.replacements.size(); ++i)
     {
-        const Token& repl = macro.replacements[i];
+        const Token &repl = macro.replacements[i];
         if (repl.type != Token::IDENTIFIER)
         {
             replacements->push_back(repl);
@@ -353,7 +355,7 @@ void MacroExpander::replaceMacroParams(const Macro& macro,
         }
 
         std::size_t iArg = std::distance(macro.parameters.begin(), iter);
-        const MacroArg& arg = args[iArg];
+        const MacroArg &arg = args[iArg];
         if (arg.empty())
         {
             continue;
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.h b/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.h
index 21b67571f1..d4fd091786 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/MacroExpander.h
@@ -23,51 +23,65 @@ class Diagnostics;
 class MacroExpander : public Lexer
 {
   public:
-    MacroExpander(Lexer* lexer, MacroSet* macroSet, Diagnostics* diagnostics);
+    MacroExpander(Lexer *lexer, MacroSet *macroSet, Diagnostics *diagnostics);
     virtual ~MacroExpander();
 
-    virtual void lex(Token* token);
+    virtual void lex(Token *token);
 
   private:
     PP_DISALLOW_COPY_AND_ASSIGN(MacroExpander);
 
-    void getToken(Token* token);
-    void ungetToken(const Token& token);
+    void getToken(Token *token);
+    void ungetToken(const Token &token);
     bool isNextTokenLeftParen();
 
-    bool pushMacro(const Macro& macro, const Token& identifier);
+    bool pushMacro(const Macro &macro, const Token &identifier);
     void popMacro();
 
-    bool expandMacro(const Macro& macro,
-                     const Token& identifier,
-                     std::vector<Token>* replacements);
+    bool expandMacro(const Macro &macro,
+                     const Token &identifier,
+                     std::vector<Token> *replacements);
 
     typedef std::vector<Token> MacroArg;
-    bool collectMacroArgs(const Macro& macro,
-                          const Token& identifier,
-                          std::vector<MacroArg>* args);
-    void replaceMacroParams(const Macro& macro,
-                            const std::vector<MacroArg>& args,
-                            std::vector<Token>* replacements);
+    bool collectMacroArgs(const Macro &macro,
+                          const Token &identifier,
+                          std::vector<MacroArg> *args);
+    void replaceMacroParams(const Macro &macro,
+                            const std::vector<MacroArg> &args,
+                            std::vector<Token> *replacements);
 
     struct MacroContext
     {
-        const Macro* macro;
+        const Macro *macro;
         std::size_t index;
         std::vector<Token> replacements;
 
-        MacroContext() : macro(0), index(0) { }
-        bool empty() const { return index == replacements.size(); }
-        const Token& get() { return replacements[index++]; }
-        void unget() { assert(index > 0); --index; }
+        MacroContext()
+            : macro(0),
+              index(0)
+        {
+        }
+        bool empty() const
+        {
+            return index == replacements.size();
+        }
+        const Token &get()
+        {
+            return replacements[index++];
+        }
+        void unget()
+        {
+            assert(index > 0);
+            --index;
+        }
     };
 
-    Lexer* mLexer;
-    MacroSet* mMacroSet;
-    Diagnostics* mDiagnostics;
+    Lexer *mLexer;
+    MacroSet *mMacroSet;
+    Diagnostics *mDiagnostics;
 
     std::auto_ptr<Token> mReserveToken;
-    std::vector<MacroContext*> mContextStack;
+    std::vector<MacroContext *> mContextStack;
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.cpp b/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.cpp
index 580ffba459..3522fa1abb 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.cpp
@@ -21,24 +21,24 @@ namespace pp
 
 struct PreprocessorImpl
 {
-    Diagnostics* diagnostics;
+    Diagnostics *diagnostics;
     MacroSet macroSet;
     Tokenizer tokenizer;
     DirectiveParser directiveParser;
     MacroExpander macroExpander;
 
-    PreprocessorImpl(Diagnostics* diag,
-                     DirectiveHandler* directiveHandler) :
-        diagnostics(diag),
-        tokenizer(diag),
-        directiveParser(&tokenizer, &macroSet, diag, directiveHandler),
-        macroExpander(&directiveParser, &macroSet, diag)
+    PreprocessorImpl(Diagnostics *diag,
+                     DirectiveHandler *directiveHandler)
+        : diagnostics(diag),
+          tokenizer(diag),
+          directiveParser(&tokenizer, &macroSet, diag, directiveHandler),
+          macroExpander(&directiveParser, &macroSet, diag)
     {
     }
 };
 
-Preprocessor::Preprocessor(Diagnostics* diagnostics,
-                           DirectiveHandler* directiveHandler)
+Preprocessor::Preprocessor(Diagnostics *diagnostics,
+                           DirectiveHandler *directiveHandler)
 {
     mImpl = new PreprocessorImpl(diagnostics, directiveHandler);
 }
@@ -49,7 +49,7 @@ Preprocessor::~Preprocessor()
 }
 
 bool Preprocessor::init(size_t count,
-                        const char* const string[],
+                        const char * const string[],
                         const int length[])
 {
     static const int kGLSLVersion = 100;
@@ -63,7 +63,7 @@ bool Preprocessor::init(size_t count,
     return mImpl->tokenizer.init(count, string, length);
 }
 
-void Preprocessor::predefineMacro(const char* name, int value)
+void Preprocessor::predefineMacro(const char *name, int value)
 {
     std::ostringstream stream;
     stream << value;
@@ -81,12 +81,7 @@ void Preprocessor::predefineMacro(const char* name, int value)
     mImpl->macroSet[name] = macro;
 }
 
-void Preprocessor::setMaxTokenLength(size_t maxLength)
-{
-    mImpl->tokenizer.setMaxTokenLength(maxLength);
-}
-
-void Preprocessor::lex(Token* token)
+void Preprocessor::lex(Token *token)
 {
     bool validToken = false;
     while (!validToken)
@@ -115,5 +110,9 @@ void Preprocessor::lex(Token* token)
     }
 }
 
-}  // namespace pp
+void Preprocessor::setMaxTokenSize(size_t maxTokenSize)
+{
+    mImpl->tokenizer.setMaxTokenSize(maxTokenSize);
+}
 
+}  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.h b/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.h
index 9a90d79a1a..0a55f1c9c1 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Preprocessor.h
@@ -22,7 +22,7 @@ struct Token;
 class Preprocessor
 {
   public:
-    Preprocessor(Diagnostics* diagnostics, DirectiveHandler* directiveHandler);
+    Preprocessor(Diagnostics *diagnostics, DirectiveHandler *directiveHandler);
     ~Preprocessor();
 
     // count: specifies the number of elements in the string and length arrays.
@@ -34,22 +34,19 @@ class Preprocessor
     // Each element in the length array may contain the length of the
     // corresponding string or a value less than 0 to indicate that the string
     // is null terminated.
-    bool init(size_t count, const char* const string[], const int length[]);
+    bool init(size_t count, const char * const string[], const int length[]);
     // Adds a pre-defined macro.
-    void predefineMacro(const char* name, int value);
-    // Sets maximum allowed token length.
-    // If token length exceeds this limit,
-    // the token text will be truncated to the given maximum length, and
-    // TOKEN_TOO_LONG diagnostic will be generated.
-    // The maximum length defaults to 256.
-    void setMaxTokenLength(size_t maxLength);
+    void predefineMacro(const char *name, int value);
 
-    void lex(Token* token);
+    void lex(Token *token);
+
+    // Set maximum preprocessor token size
+    void setMaxTokenSize(size_t maxTokenSize);
 
   private:
     PP_DISALLOW_COPY_AND_ASSIGN(Preprocessor);
 
-    PreprocessorImpl* mImpl;
+    PreprocessorImpl *mImpl;
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/SourceLocation.h b/src/3rdparty/angle/src/compiler/preprocessor/SourceLocation.h
index 6982613ac7..d4c1a5e178 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/SourceLocation.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/SourceLocation.h
@@ -12,10 +12,18 @@ namespace pp
 
 struct SourceLocation
 {
-    SourceLocation() : file(0), line(0) { }
-    SourceLocation(int f, int l) : file(f), line(l) { }
+    SourceLocation()
+        : file(0),
+          line(0)
+    {
+    }
+    SourceLocation(int f, int l)
+        : file(f),
+          line(l)
+    {
+    }
 
-    bool equals(const SourceLocation& other) const
+    bool equals(const SourceLocation &other) const
     {
         return (file == other.file) && (line == other.line);
     }
@@ -24,12 +32,12 @@ struct SourceLocation
     int line;
 };
 
-inline bool operator==(const SourceLocation& lhs, const SourceLocation& rhs)
+inline bool operator==(const SourceLocation &lhs, const SourceLocation &rhs)
 {
     return lhs.equals(rhs);
 }
 
-inline bool operator!=(const SourceLocation& lhs, const SourceLocation& rhs)
+inline bool operator!=(const SourceLocation &lhs, const SourceLocation &rhs)
 {
     return !lhs.equals(rhs);
 }
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Token.cpp b/src/3rdparty/angle/src/compiler/preprocessor/Token.cpp
index 67f50aa32c..d102654747 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Token.cpp
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Token.cpp
@@ -21,7 +21,7 @@ void Token::reset()
     text.clear();
 }
 
-bool Token::equals(const Token& other) const
+bool Token::equals(const Token &other) const
 {
     return (type == other.type) &&
            (flags == other.flags) &&
@@ -53,25 +53,25 @@ void Token::setExpansionDisabled(bool disable)
         flags &= ~EXPANSION_DISABLED;
 }
 
-bool Token::iValue(int* value) const
+bool Token::iValue(int *value) const
 {
     assert(type == CONST_INT);
     return numeric_lex_int(text, value);
 }
 
-bool Token::uValue(unsigned int* value) const
+bool Token::uValue(unsigned int *value) const
 {
     assert(type == CONST_INT);
     return numeric_lex_int(text, value);
 }
 
-bool Token::fValue(float* value) const
+bool Token::fValue(float *value) const
 {
     assert(type == CONST_FLOAT);
     return numeric_lex_float(text, value);
 }
 
-std::ostream& operator<<(std::ostream& out, const Token& token)
+std::ostream &operator<<(std::ostream &out, const Token &token)
 {
     if (token.hasLeadingSpace())
         out << " ";
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Token.h b/src/3rdparty/angle/src/compiler/preprocessor/Token.h
index 8b553aecb6..8832e279c7 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Token.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Token.h
@@ -62,27 +62,40 @@ struct Token
         EXPANSION_DISABLED = 1 << 2
     };
 
-    Token() : type(0), flags(0) { }
+    Token()
+        : type(0),
+          flags(0)
+    {
+    }
 
     void reset();
-    bool equals(const Token& other) const;
+    bool equals(const Token &other) const;
 
     // Returns true if this is the first token on line.
     // It disregards any leading whitespace.
-    bool atStartOfLine() const { return (flags & AT_START_OF_LINE) != 0; }
+    bool atStartOfLine() const
+    {
+        return (flags & AT_START_OF_LINE) != 0;
+    }
     void setAtStartOfLine(bool start);
 
-    bool hasLeadingSpace() const { return (flags & HAS_LEADING_SPACE) != 0; }
+    bool hasLeadingSpace() const
+    {
+        return (flags & HAS_LEADING_SPACE) != 0;
+    }
     void setHasLeadingSpace(bool space);
 
-    bool expansionDisabled() const { return (flags & EXPANSION_DISABLED) != 0; }
+    bool expansionDisabled() const
+    {
+        return (flags & EXPANSION_DISABLED) != 0;
+    }
     void setExpansionDisabled(bool disable);
 
     // Converts text into numeric value for CONST_INT and CONST_FLOAT token.
     // Returns false if the parsed value cannot fit into an int or float.
-    bool iValue(int* value) const;
-    bool uValue(unsigned int* value) const;
-    bool fValue(float* value) const;
+    bool iValue(int *value) const;
+    bool uValue(unsigned int *value) const;
+    bool fValue(float *value) const;
 
     int type;
     unsigned int flags;
@@ -90,17 +103,17 @@ struct Token
     std::string text;
 };
 
-inline bool operator==(const Token& lhs, const Token& rhs)
+inline bool operator==(const Token &lhs, const Token &rhs)
 {
     return lhs.equals(rhs);
 }
 
-inline bool operator!=(const Token& lhs, const Token& rhs)
+inline bool operator!=(const Token &lhs, const Token &rhs)
 {
     return !lhs.equals(rhs);
 }
 
-extern std::ostream& operator<<(std::ostream& out, const Token& token);
+extern std::ostream &operator<<(std::ostream &out, const Token &token);
 
 }  // namepsace pp
 #endif  // COMPILER_PREPROCESSOR_TOKEN_H_
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.h b/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.h
index 9d131f865a..07ad93da05 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -21,7 +21,7 @@ class Tokenizer : public Lexer
   public:
     struct Context
     {
-        Diagnostics* diagnostics;
+        Diagnostics *diagnostics;
 
         Input input;
         // The location where yytext points to. Token location should track
@@ -33,25 +33,25 @@ class Tokenizer : public Lexer
         bool lineStart;
     };
 
-    Tokenizer(Diagnostics* diagnostics);
+    Tokenizer(Diagnostics *diagnostics);
     ~Tokenizer();
 
-    bool init(size_t count, const char* const string[], const int length[]);
+    bool init(size_t count, const char * const string[], const int length[]);
 
-    void setMaxTokenLength(size_t maxLength) { mMaxTokenLength = maxLength; }
     void setFileNumber(int file);
     void setLineNumber(int line);
+    void setMaxTokenSize(size_t maxTokenSize);
 
-    virtual void lex(Token* token);
+    virtual void lex(Token *token);
 
   private:
     PP_DISALLOW_COPY_AND_ASSIGN(Tokenizer);
     bool initScanner();
     void destroyScanner();
 
-    void* mHandle;  // Scanner handle.
+    void *mHandle;  // Scanner handle.
     Context mContext;  // Scanner extra.
-    size_t mMaxTokenLength;
+    size_t mMaxTokenSize; // Maximum token size
 };
 
 }  // namespace pp
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.l b/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.l
index f1380b26b7..2a77b905a4 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.l
+++ b/src/3rdparty/angle/src/compiler/preprocessor/Tokenizer.l
@@ -1,6 +1,6 @@
 /*
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -14,7 +14,7 @@ IF YOU MODIFY THIS FILE YOU ALSO NEED TO RUN generate_parser.sh.
 
 %top{
 //
-// Copyright (c) 2011-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2011-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -78,9 +78,9 @@ NEWLINE     \n|\r|\r\n
 IDENTIFIER  [_a-zA-Z][_a-zA-Z0-9]*
 PUNCTUATOR  [][<>(){}.+-/*%^|&~=!:;,?]
 
-DECIMAL_CONSTANT      [1-9][0-9]*
-OCTAL_CONSTANT        0[0-7]*
-HEXADECIMAL_CONSTANT  0[xX][0-9a-fA-F]+
+DECIMAL_CONSTANT      [1-9][0-9]*[uU]?
+OCTAL_CONSTANT        0[0-7]*[uU]?
+HEXADECIMAL_CONSTANT  0[xX][0-9a-fA-F]+[uU]?
 
 DIGIT                [0-9]
 EXPONENT_PART        [eE][+-]?{DIGIT}+
@@ -114,12 +114,12 @@ FRACTIONAL_CONSTANT  ({DIGIT}*"."{DIGIT}+)|({DIGIT}+".")
     return pp::Token::IDENTIFIER;
 }
 
-{DECIMAL_CONSTANT}|{OCTAL_CONSTANT}|{HEXADECIMAL_CONSTANT} {
+({DECIMAL_CONSTANT}[uU]?)|({OCTAL_CONSTANT}[uU]?)|({HEXADECIMAL_CONSTANT}[uU]?) {
     yylval->assign(yytext, yyleng);
     return pp::Token::CONST_INT;
 }
 
-({DIGIT}+{EXPONENT_PART})|({FRACTIONAL_CONSTANT}{EXPONENT_PART}?) {
+({DIGIT}+{EXPONENT_PART}[fF]?)|({FRACTIONAL_CONSTANT}{EXPONENT_PART}?[fF]?) {
     yylval->assign(yytext, yyleng);
     return pp::Token::CONST_FLOAT;
 }
@@ -267,9 +267,7 @@ FRACTIONAL_CONSTANT  ({DIGIT}*"."{DIGIT}+)|({DIGIT}+".")
 
 namespace pp {
 
-Tokenizer::Tokenizer(Diagnostics* diagnostics)
-    : mHandle(0),
-      mMaxTokenLength(256)
+Tokenizer::Tokenizer(Diagnostics *diagnostics) : mHandle(0)
 {
     mContext.diagnostics = diagnostics;
 }
@@ -279,9 +277,10 @@ Tokenizer::~Tokenizer()
     destroyScanner();
 }
 
-bool Tokenizer::init(size_t count, const char* const string[], const int length[])
+bool Tokenizer::init(size_t count, const char * const string[], const int length[])
 {
-    if ((count > 0) && (string == 0)) return false;
+    if ((count > 0) && (string == 0))
+        return false;
 
     mContext.input = Input(count, string, length);
     return initScanner();
@@ -299,14 +298,19 @@ void Tokenizer::setLineNumber(int line)
     yyset_lineno(line, mHandle);
 }
 
-void Tokenizer::lex(Token* token)
+void Tokenizer::setMaxTokenSize(size_t maxTokenSize)
+{
+    mMaxTokenSize = maxTokenSize;
+}
+
+void Tokenizer::lex(Token *token)
 {
     token->type = yylex(&token->text, &token->location, mHandle);
-    if (token->text.size() > mMaxTokenLength)
+    if (token->text.size() > mMaxTokenSize)
     {
         mContext.diagnostics->report(Diagnostics::PP_TOKEN_TOO_LONG,
                                      token->location, token->text);
-        token->text.erase(mMaxTokenLength);
+        token->text.erase(mMaxTokenSize);
     }
 
     token->flags = 0;
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/numeric_lex.h b/src/3rdparty/angle/src/compiler/preprocessor/numeric_lex.h
index b04125d230..8a24540696 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/numeric_lex.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/numeric_lex.h
@@ -13,7 +13,7 @@
 
 namespace pp {
 
-inline std::ios::fmtflags numeric_base_int(const std::string& str)
+inline std::ios::fmtflags numeric_base_int(const std::string &str)
 {
     if ((str.size() >= 2) &&
         (str[0] == '0') &&
@@ -21,7 +21,7 @@ inline std::ios::fmtflags numeric_base_int(const std::string& str)
     {
         return std::ios::hex;
     }
-    else if ((str.size() >= 1) && (str[0] == '0'))
+    if ((str.size() >= 1) && (str[0] == '0'))
     {
         return std::ios::oct;
     }
@@ -34,7 +34,7 @@ inline std::ios::fmtflags numeric_base_int(const std::string& str)
 // in which case false is returned.
 
 template<typename IntType>
-bool numeric_lex_int(const std::string& str, IntType* value)
+bool numeric_lex_int(const std::string &str, IntType *value)
 {
     std::istringstream stream(str);
     // This should not be necessary, but MSVS has a buggy implementation.
@@ -46,7 +46,7 @@ bool numeric_lex_int(const std::string& str, IntType* value)
 }
 
 template<typename FloatType>
-bool numeric_lex_float(const std::string& str, FloatType* value)
+bool numeric_lex_float(const std::string &str, FloatType *value)
 {
     std::istringstream stream(str);
     // Force "C" locale so that decimal character is always '.', and
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/pp_utils.h b/src/3rdparty/angle/src/compiler/preprocessor/pp_utils.h
index 17164ea8b0..9fba9385c5 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/pp_utils.h
+++ b/src/3rdparty/angle/src/compiler/preprocessor/pp_utils.h
@@ -12,7 +12,7 @@
 // A macro to disallow the copy constructor and operator= functions
 // This must be used in the private: declarations for a class.
 #define PP_DISALLOW_COPY_AND_ASSIGN(TypeName) \
-  TypeName(const TypeName&);               \
-  void operator=(const TypeName&)
+  TypeName(const TypeName &);               \
+  void operator=(const TypeName &)
 
 #endif // COMPILER_PREPROCESSOR_PPUTILS_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/BaseTypes.h b/src/3rdparty/angle/src/compiler/translator/BaseTypes.h
index 7bdaf14983..324b0669f4 100644
--- a/src/3rdparty/angle/src/compiler/translator/BaseTypes.h
+++ b/src/3rdparty/angle/src/compiler/translator/BaseTypes.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -7,6 +7,8 @@
 #ifndef _BASICTYPES_INCLUDED_
 #define _BASICTYPES_INCLUDED_
 
+#include <assert.h>
+
 //
 // Precision qualifiers
 //
@@ -38,38 +40,227 @@ enum TBasicType
     EbtVoid,
     EbtFloat,
     EbtInt,
+    EbtUInt,
     EbtBool,
-    EbtGuardSamplerBegin,  // non type:  see implementation of IsSampler()
+    EbtGVec4,              // non type: represents vec4, ivec4 and uvec4
+    EbtGuardSamplerBegin,  // non type: see implementation of IsSampler()
     EbtSampler2D,
+    EbtSampler3D,
     EbtSamplerCube,
+    EbtSampler2DArray,
     EbtSamplerExternalOES,  // Only valid if OES_EGL_image_external exists.
     EbtSampler2DRect,       // Only valid if GL_ARB_texture_rectangle exists.
-    EbtGuardSamplerEnd,    // non type:  see implementation of IsSampler()
+    EbtISampler2D,
+    EbtISampler3D,
+    EbtISamplerCube,
+    EbtISampler2DArray,
+    EbtUSampler2D,
+    EbtUSampler3D,
+    EbtUSamplerCube,
+    EbtUSampler2DArray,
+    EbtSampler2DShadow,
+    EbtSamplerCubeShadow,
+    EbtSampler2DArrayShadow,
+    EbtGuardSamplerEnd,    // non type: see implementation of IsSampler()
+    EbtGSampler2D,         // non type: represents sampler2D, isampler2D and usampler2D
+    EbtGSampler3D,         // non type: represents sampler3D, isampler3D and usampler3D
+    EbtGSamplerCube,       // non type: represents samplerCube, isamplerCube and usamplerCube
+    EbtGSampler2DArray,    // non type: represents sampler2DArray, isampler2DArray and usampler2DArray
     EbtStruct,
+    EbtInterfaceBlock,
     EbtAddress,            // should be deprecated??
-    EbtInvariant          // used as a type when qualifying a previously declared variable as being invariant
 };
 
-inline const char* getBasicString(TBasicType t)
+const char* getBasicString(TBasicType t);
+
+inline bool IsSampler(TBasicType type)
+{
+    return type > EbtGuardSamplerBegin && type < EbtGuardSamplerEnd;
+}
+
+inline bool IsIntegerSampler(TBasicType type)
 {
-    switch (t)
+    switch (type)
     {
-    case EbtVoid:              return "void";              break;
-    case EbtFloat:             return "float";             break;
-    case EbtInt:               return "int";               break;
-    case EbtBool:              return "bool";              break;
-    case EbtSampler2D:         return "sampler2D";         break;
-    case EbtSamplerCube:       return "samplerCube";       break;
-    case EbtSamplerExternalOES: return "samplerExternalOES"; break;
-    case EbtSampler2DRect:     return "sampler2DRect";     break;
-    case EbtStruct:            return "structure";         break;
-    default:                   return "unknown type";
+      case EbtISampler2D:
+      case EbtISampler3D:
+      case EbtISamplerCube:
+      case EbtISampler2DArray:
+      case EbtUSampler2D:
+      case EbtUSampler3D:
+      case EbtUSamplerCube:
+      case EbtUSampler2DArray:
+        return true;
+      case EbtSampler2D:
+      case EbtSampler3D:
+      case EbtSamplerCube:
+      case EbtSamplerExternalOES:
+      case EbtSampler2DRect:
+      case EbtSampler2DArray:
+      case EbtSampler2DShadow:
+      case EbtSamplerCubeShadow:
+      case EbtSampler2DArrayShadow:
+        return false;
+      default:
+        assert(!IsSampler(type));
     }
+
+    return false;
 }
 
-inline bool IsSampler(TBasicType type)
+inline bool IsSampler2D(TBasicType type)
 {
-    return type > EbtGuardSamplerBegin && type < EbtGuardSamplerEnd;
+    switch (type)
+    {
+      case EbtSampler2D:
+      case EbtISampler2D:
+      case EbtUSampler2D:
+      case EbtSampler2DArray:
+      case EbtISampler2DArray:
+      case EbtUSampler2DArray:
+      case EbtSampler2DRect:
+      case EbtSamplerExternalOES:
+      case EbtSampler2DShadow:
+      case EbtSampler2DArrayShadow:
+        return true;
+      case EbtSampler3D:
+      case EbtISampler3D:
+      case EbtUSampler3D:
+      case EbtISamplerCube:
+      case EbtUSamplerCube:
+      case EbtSamplerCube:
+      case EbtSamplerCubeShadow:
+        return false;
+      default:
+        assert(!IsSampler(type));
+    }
+
+    return false;
+}
+
+inline bool IsSamplerCube(TBasicType type)
+{
+    switch (type)
+    {
+      case EbtSamplerCube:
+      case EbtISamplerCube:
+      case EbtUSamplerCube:
+      case EbtSamplerCubeShadow:
+        return true;
+      case EbtSampler2D:
+      case EbtSampler3D:
+      case EbtSamplerExternalOES:
+      case EbtSampler2DRect:
+      case EbtSampler2DArray:
+      case EbtISampler2D:
+      case EbtISampler3D:
+      case EbtISampler2DArray:
+      case EbtUSampler2D:
+      case EbtUSampler3D:
+      case EbtUSampler2DArray:
+      case EbtSampler2DShadow:
+      case EbtSampler2DArrayShadow:
+        return false;
+      default:
+        assert(!IsSampler(type));
+    }
+
+    return false;
+}
+
+inline bool IsSampler3D(TBasicType type)
+{
+    switch (type)
+    {
+      case EbtSampler3D:
+      case EbtISampler3D:
+      case EbtUSampler3D:
+        return true;
+      case EbtSampler2D:
+      case EbtSamplerCube:
+      case EbtSamplerExternalOES:
+      case EbtSampler2DRect:
+      case EbtSampler2DArray:
+      case EbtISampler2D:
+      case EbtISamplerCube:
+      case EbtISampler2DArray:
+      case EbtUSampler2D:
+      case EbtUSamplerCube:
+      case EbtUSampler2DArray:
+      case EbtSampler2DShadow:
+      case EbtSamplerCubeShadow:
+      case EbtSampler2DArrayShadow:
+        return false;
+      default:
+        assert(!IsSampler(type));
+    }
+
+    return false;
+}
+
+inline bool IsSamplerArray(TBasicType type)
+{
+    switch (type)
+    {
+      case EbtSampler2DArray:
+      case EbtISampler2DArray:
+      case EbtUSampler2DArray:
+      case EbtSampler2DArrayShadow:
+        return true;
+      case EbtSampler2D:
+      case EbtISampler2D:
+      case EbtUSampler2D:
+      case EbtSampler2DRect:
+      case EbtSamplerExternalOES:
+      case EbtSampler3D:
+      case EbtISampler3D:
+      case EbtUSampler3D:
+      case EbtISamplerCube:
+      case EbtUSamplerCube:
+      case EbtSamplerCube:
+      case EbtSampler2DShadow:
+      case EbtSamplerCubeShadow:
+        return false;
+      default:
+        assert(!IsSampler(type));
+    }
+
+    return false;
+}
+
+inline bool IsShadowSampler(TBasicType type)
+{
+    switch (type)
+    {
+      case EbtSampler2DShadow:
+      case EbtSamplerCubeShadow:
+      case EbtSampler2DArrayShadow:
+        return true;
+      case EbtISampler2D:
+      case EbtISampler3D:
+      case EbtISamplerCube:
+      case EbtISampler2DArray:
+      case EbtUSampler2D:
+      case EbtUSampler3D:
+      case EbtUSamplerCube:
+      case EbtUSampler2DArray:
+      case EbtSampler2D:
+      case EbtSampler3D:
+      case EbtSamplerCube:
+      case EbtSamplerExternalOES:
+      case EbtSampler2DRect:
+      case EbtSampler2DArray:
+        return false;
+      default:
+        assert(!IsSampler(type));
+    }
+
+    return false;
+}
+
+inline bool SupportsPrecision(TBasicType type)
+{
+    return type == EbtFloat || type == EbtInt || type == EbtUInt || IsSampler(type);
 }
 
 //
@@ -91,6 +282,11 @@ enum TQualifier
     EvqInvariantVaryingOut,    // vertex shaders only  read/write
     EvqUniform,       // Readonly, vertex and fragment
 
+    EvqVertexIn,      // Vertex shader input
+    EvqFragmentOut,   // Fragment shader output
+    EvqVertexOut,     // Vertex shader output
+    EvqFragmentIn,    // Fragment shader input
+
     // parameters
     EvqIn,
     EvqOut,
@@ -111,10 +307,58 @@ enum TQualifier
     EvqFragData,
     EvqFragDepth,
 
+    // GLSL ES 3.0 vertex output and fragment input
+    EvqSmooth,        // Incomplete qualifier, smooth is the default
+    EvqFlat,          // Incomplete qualifier
+    EvqSmoothOut = EvqSmooth,
+    EvqFlatOut = EvqFlat,
+    EvqCentroidOut,   // Implies smooth
+    EvqSmoothIn,
+    EvqFlatIn,
+    EvqCentroidIn,    // Implies smooth
+
     // end of list
     EvqLast
 };
 
+enum TLayoutMatrixPacking
+{
+    EmpUnspecified,
+    EmpRowMajor,
+    EmpColumnMajor
+};
+
+enum TLayoutBlockStorage
+{
+    EbsUnspecified,
+    EbsShared,
+    EbsPacked,
+    EbsStd140
+};
+
+struct TLayoutQualifier
+{
+    int location;
+    TLayoutMatrixPacking matrixPacking;
+    TLayoutBlockStorage blockStorage;
+
+    static TLayoutQualifier create()
+    {
+        TLayoutQualifier layoutQualifier;
+
+        layoutQualifier.location = -1;
+        layoutQualifier.matrixPacking = EmpUnspecified;
+        layoutQualifier.blockStorage = EbsUnspecified;
+
+        return layoutQualifier;
+    }
+
+    bool isEmpty() const
+    {
+        return location == -1 && matrixPacking == EmpUnspecified && blockStorage == EbsUnspecified;
+    }
+};
+
 //
 // This is just for debug print out, carried along with the definitions above.
 //
@@ -132,6 +376,10 @@ inline const char* getQualifierString(TQualifier q)
     case EvqInvariantVaryingIn: return "invariant varying";	break;
     case EvqInvariantVaryingOut:return "invariant varying";	break;
     case EvqUniform:        return "uniform";        break;
+    case EvqVertexIn:       return "in";             break;
+    case EvqFragmentOut:    return "out";            break;
+    case EvqVertexOut:      return "out";            break;
+    case EvqFragmentIn:     return "in";             break;
     case EvqIn:             return "in";             break;
     case EvqOut:            return "out";            break;
     case EvqInOut:          return "inout";          break;
@@ -140,10 +388,53 @@ inline const char* getQualifierString(TQualifier q)
     case EvqFragCoord:      return "FragCoord";      break;
     case EvqFrontFacing:    return "FrontFacing";    break;
     case EvqFragColor:      return "FragColor";      break;
-    case EvqFragData:       return "FragData";      break;
-    case EvqFragDepth:      return "FragDepth";     break;
+    case EvqFragData:       return "FragData";       break;
+    case EvqFragDepth:      return "FragDepth";      break;
+    case EvqSmoothOut:      return "smooth out";     break;
+    case EvqCentroidOut:    return "centroid out";   break;
+    case EvqFlatOut:        return "flat out";       break;
+    case EvqSmoothIn:       return "smooth in";      break;
+    case EvqCentroidIn:     return "centroid in";    break;
+    case EvqFlatIn:         return "flat in";        break;
     default:                return "unknown qualifier";
     }
 }
 
+inline const char* getMatrixPackingString(TLayoutMatrixPacking mpq)
+{
+    switch (mpq)
+    {
+    case EmpUnspecified:    return "mp_unspecified";
+    case EmpRowMajor:       return "row_major";
+    case EmpColumnMajor:    return "column_major";
+    default:                return "unknown matrix packing";
+    }
+}
+
+inline const char* getBlockStorageString(TLayoutBlockStorage bsq)
+{
+    switch (bsq)
+    {
+    case EbsUnspecified:    return "bs_unspecified";
+    case EbsShared:         return "shared";
+    case EbsPacked:         return "packed";
+    case EbsStd140:         return "std140";
+    default:                return "unknown block storage";
+    }
+}
+
+inline const char* getInterpolationString(TQualifier q)
+{
+    switch(q)
+    {
+    case EvqSmoothOut:      return "smooth";   break;
+    case EvqCentroidOut:    return "centroid"; break;
+    case EvqFlatOut:        return "flat";     break;
+    case EvqSmoothIn:       return "smooth";   break;
+    case EvqCentroidIn:     return "centroid"; break;
+    case EvqFlatIn:         return "flat";     break;
+    default:                return "unknown interpolation";
+    }
+}
+
 #endif // _BASICTYPES_INCLUDED_
diff --git a/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.cpp b/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.cpp
index 92b71c6bdb..0e8239cc1e 100644
--- a/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.cpp
@@ -4,8 +4,8 @@
 // found in the LICENSE file.
 //
 
+#include "angle_gl.h"
 #include "compiler/translator/BuiltInFunctionEmulator.h"
-
 #include "compiler/translator/SymbolTable.h"
 
 namespace {
@@ -243,7 +243,7 @@ public:
                 default:
                     return true;
             };
-            const TIntermSequence& sequence = node->getSequence();
+            const TIntermSequence& sequence = *(node->getSequence());
             // Right now we only handle built-in functions with two parameters.
             if (sequence.size() != 2)
                 return true;
@@ -265,9 +265,9 @@ private:
 
 }  // anonymous namepsace
 
-BuiltInFunctionEmulator::BuiltInFunctionEmulator(ShShaderType shaderType)
+BuiltInFunctionEmulator::BuiltInFunctionEmulator(sh::GLenum shaderType)
 {
-    if (shaderType == SH_FRAGMENT_SHADER) {
+    if (shaderType == GL_FRAGMENT_SHADER) {
         mFunctionMask = kFunctionEmulationFragmentMask;
         mFunctionSource = kFunctionEmulationFragmentSource;
     } else {
@@ -327,7 +327,7 @@ BuiltInFunctionEmulator::TBuiltInFunction
 BuiltInFunctionEmulator::IdentifyFunction(
     TOperator op, const TType& param)
 {
-    if (param.getNominalSize() > 4)
+    if (param.getNominalSize() > 4 || param.getSecondarySize() > 4)
         return TFunctionUnknown;
     unsigned int function = TFunctionUnknown;
     switch (op) {
@@ -356,9 +356,9 @@ BuiltInFunctionEmulator::IdentifyFunction(
 {
     // Right now for all the emulated functions with two parameters, the two
     // parameters have the same type.
-    if (param1.isVector() != param2.isVector() ||
-        param1.getNominalSize() != param2.getNominalSize() ||
-        param1.getNominalSize() > 4)
+    if (param1.getNominalSize()     != param2.getNominalSize()   ||
+        param1.getSecondarySize()   != param2.getSecondarySize() ||
+        param1.getNominalSize() > 4 || param1.getSecondarySize() > 4)
         return TFunctionUnknown;
 
     unsigned int function = TFunctionUnknown;
diff --git a/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.h b/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.h
index cfb71a803a..c6bf77c386 100644
--- a/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.h
+++ b/src/3rdparty/angle/src/compiler/translator/BuiltInFunctionEmulator.h
@@ -7,10 +7,8 @@
 #ifndef COMPILIER_BUILT_IN_FUNCTION_EMULATOR_H_
 #define COMPILIER_BUILT_IN_FUNCTION_EMULATOR_H_
 
-#include "GLSLANG/ShaderLang.h"
-
 #include "compiler/translator/InfoSink.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 //
 // This class decides which built-in functions need to be replaced with the
@@ -19,7 +17,7 @@
 //
 class BuiltInFunctionEmulator {
 public:
-    BuiltInFunctionEmulator(ShShaderType shaderType);
+    BuiltInFunctionEmulator(sh::GLenum shaderType);
     // Records that a function is called by the shader and might needs to be
     // emulated.  If the function's group is not in mFunctionGroupFilter, this
     // becomes an no-op.
diff --git a/src/3rdparty/angle/src/compiler/translator/CodeGen.cpp b/src/3rdparty/angle/src/compiler/translator/CodeGen.cpp
index 8f5d129104..71056f4297 100644
--- a/src/3rdparty/angle/src/compiler/translator/CodeGen.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/CodeGen.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -14,17 +14,17 @@
 // a subclass of TCompiler.
 //
 TCompiler* ConstructCompiler(
-    ShShaderType type, ShShaderSpec spec, ShShaderOutput output)
+    sh::GLenum type, ShShaderSpec spec, ShShaderOutput output)
 {
     switch (output) {
-      case SH_ESSL_OUTPUT:
+    case SH_ESSL_OUTPUT:
         return new TranslatorESSL(type, spec);
-      case SH_GLSL_OUTPUT:
+    case SH_GLSL_OUTPUT:
         return new TranslatorGLSL(type, spec);
-      case SH_HLSL9_OUTPUT:
-      case SH_HLSL11_OUTPUT:
+    case SH_HLSL9_OUTPUT:
+    case SH_HLSL11_OUTPUT:
         return new TranslatorHLSL(type, spec, output);
-      default:
+    default:
         return NULL;
     }
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/Compiler.cpp b/src/3rdparty/angle/src/compiler/translator/Compiler.cpp
index eb7465e35c..368cd2ae4a 100644
--- a/src/3rdparty/angle/src/compiler/translator/Compiler.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/Compiler.cpp
@@ -1,33 +1,51 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 #include "compiler/translator/BuiltInFunctionEmulator.h"
+#include "compiler/translator/Compiler.h"
 #include "compiler/translator/DetectCallDepth.h"
 #include "compiler/translator/ForLoopUnroll.h"
 #include "compiler/translator/Initialize.h"
 #include "compiler/translator/InitializeParseContext.h"
 #include "compiler/translator/InitializeVariables.h"
-#include "compiler/translator/MapLongVariableNames.h"
 #include "compiler/translator/ParseContext.h"
+#include "compiler/translator/RegenerateStructNames.h"
 #include "compiler/translator/RenameFunction.h"
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/ScalarizeVecAndMatConstructorArgs.h"
 #include "compiler/translator/UnfoldShortCircuitAST.h"
 #include "compiler/translator/ValidateLimitations.h"
+#include "compiler/translator/ValidateOutputs.h"
 #include "compiler/translator/VariablePacker.h"
 #include "compiler/translator/depgraph/DependencyGraph.h"
 #include "compiler/translator/depgraph/DependencyGraphOutput.h"
 #include "compiler/translator/timing/RestrictFragmentShaderTiming.h"
 #include "compiler/translator/timing/RestrictVertexShaderTiming.h"
 #include "third_party/compiler/ArrayBoundsClamper.h"
+#include "angle_gl.h"
+#include "common/utilities.h"
 
-bool isWebGLBasedSpec(ShShaderSpec spec)
+bool IsWebGLBasedSpec(ShShaderSpec spec)
 {
      return spec == SH_WEBGL_SPEC || spec == SH_CSS_SHADERS_SPEC;
 }
 
+size_t GetGlobalMaxTokenSize(ShShaderSpec spec)
+{
+    // WebGL defines a max token legnth of 256, while ES2 leaves max token
+    // size undefined. ES3 defines a max size of 1024 characters.
+    if (IsWebGLBasedSpec(spec))
+    {
+        return 256;
+    }
+    else
+    {
+        return 1024;
+    }
+}
+
 namespace {
 class TScopedPoolAllocator
 {
@@ -78,9 +96,10 @@ TShHandleBase::~TShHandleBase()
     allocator.popAll();
 }
 
-TCompiler::TCompiler(ShShaderType type, ShShaderSpec spec)
+TCompiler::TCompiler(sh::GLenum type, ShShaderSpec spec, ShShaderOutput output)
     : shaderType(type),
       shaderSpec(spec),
+      outputType(output),
       maxUniformVectors(0),
       maxExpressionComplexity(0),
       maxCallStackDepth(0),
@@ -88,18 +107,16 @@ TCompiler::TCompiler(ShShaderType type, ShShaderSpec spec)
       clampingStrategy(SH_CLAMP_WITH_CLAMP_INTRINSIC),
       builtInFunctionEmulator(type)
 {
-    longNameMap = LongNameMap::GetInstance();
 }
 
 TCompiler::~TCompiler()
 {
-    ASSERT(longNameMap);
-    longNameMap->Release();
 }
 
 bool TCompiler::Init(const ShBuiltInResources& resources)
 {
-    maxUniformVectors = (shaderType == SH_VERTEX_SHADER) ?
+    shaderVersion = 100;
+    maxUniformVectors = (shaderType == GL_VERTEX_SHADER) ?
         resources.MaxVertexUniformVectors :
         resources.MaxFragmentUniformVectors;
     maxExpressionComplexity = resources.MaxExpressionComplexity;
@@ -132,7 +149,7 @@ bool TCompiler::compile(const char* const shaderStrings[],
         return true;
 
     // If compiling for WebGL, validate loop and indexing as well.
-    if (isWebGLBasedSpec(shaderSpec))
+    if (IsWebGLBasedSpec(shaderSpec))
         compileOptions |= SH_VALIDATE_LOOP_INDEXING;
 
     // First string is path of source file if flag is set. The actual source follows.
@@ -159,14 +176,24 @@ bool TCompiler::compile(const char* const shaderStrings[],
     bool success =
         (PaParseStrings(numStrings - firstSource, &shaderStrings[firstSource], NULL, &parseContext) == 0) &&
         (parseContext.treeRoot != NULL);
+
+    shaderVersion = parseContext.getShaderVersion();
+
     if (success)
     {
         TIntermNode* root = parseContext.treeRoot;
         success = intermediate.postProcess(root);
 
+        // Disallow expressions deemed too complex.
+        if (success && (compileOptions & SH_LIMIT_EXPRESSION_COMPLEXITY))
+            success = limitExpressionComplexity(root);
+
         if (success)
             success = detectCallDepth(root, infoSink, (compileOptions & SH_LIMIT_CALL_STACK_DEPTH) != 0);
 
+        if (success && shaderVersion == 300 && shaderType == GL_FRAGMENT_SHADER)
+            success = validateOutputs(root);
+
         if (success && (compileOptions & SH_VALIDATE_LOOP_INDEXING))
             success = validateLimitations(root);
 
@@ -178,7 +205,21 @@ bool TCompiler::compile(const char* const shaderStrings[],
 
         // Unroll for-loop markup needs to happen after validateLimitations pass.
         if (success && (compileOptions & SH_UNROLL_FOR_LOOP_WITH_INTEGER_INDEX))
-            ForLoopUnroll::MarkForLoopsWithIntegerIndicesForUnrolling(root);
+        {
+            ForLoopUnrollMarker marker(ForLoopUnrollMarker::kIntegerIndex);
+            root->traverse(&marker);
+        }
+        if (success && (compileOptions & SH_UNROLL_FOR_LOOP_WITH_SAMPLER_ARRAY_INDEX))
+        {
+            ForLoopUnrollMarker marker(ForLoopUnrollMarker::kSamplerArrayIndex);
+            root->traverse(&marker);
+            if (marker.samplerArrayIndexIsFloatLoopIndex())
+            {
+                infoSink.info.prefix(EPrefixError);
+                infoSink.info << "sampler array index is float loop index";
+                success = false;
+            }
+        }
 
         // Built-in function emulation needs to happen after validateLimitations pass.
         if (success && (compileOptions & SH_EMULATE_BUILT_IN_FUNCTIONS))
@@ -188,18 +229,7 @@ bool TCompiler::compile(const char* const shaderStrings[],
         if (success && (compileOptions & SH_CLAMP_INDIRECT_ARRAY_BOUNDS))
             arrayBoundsClamper.MarkIndirectArrayBoundsForClamping(root);
 
-        // Disallow expressions deemed too complex.
-        if (success && (compileOptions & SH_LIMIT_EXPRESSION_COMPLEXITY))
-            success = limitExpressionComplexity(root);
-
-        // Call mapLongVariableNames() before collectAttribsUniforms() so in
-        // collectAttribsUniforms() we already have the mapped symbol names and
-        // we could composite mapped and original variable names.
-        // Also, if we hash all the names, then no need to do this for long names.
-        if (success && (compileOptions & SH_MAP_LONG_VARIABLE_NAMES) && hashFunction == NULL)
-            mapLongVariableNames(root);
-
-        if (success && shaderType == SH_VERTEX_SHADER && (compileOptions & SH_INIT_GL_POSITION))
+        if (success && shaderType == GL_VERTEX_SHADER && (compileOptions & SH_INIT_GL_POSITION))
             initializeGLPosition(root);
 
         if (success && (compileOptions & SH_UNFOLD_SHORT_CIRCUIT))
@@ -221,11 +251,24 @@ bool TCompiler::compile(const char* const shaderStrings[],
                     infoSink.info << "too many uniforms";
                 }
             }
-            if (success && shaderType == SH_VERTEX_SHADER &&
+            if (success && shaderType == GL_VERTEX_SHADER &&
                 (compileOptions & SH_INIT_VARYINGS_WITHOUT_STATIC_USE))
                 initializeVaryingsWithoutStaticUse(root);
         }
 
+        if (success && (compileOptions & SH_SCALARIZE_VEC_AND_MAT_CONSTRUCTOR_ARGS))
+        {
+            ScalarizeVecAndMatConstructorArgs scalarizer(
+                shaderType, fragmentPrecisionHigh);
+            root->traverse(&scalarizer);
+        }
+
+        if (success && (compileOptions & SH_REGENERATE_STRUCT_NAMES))
+        {
+            RegenerateStructNames gen(symbolTable, shaderVersion);
+            root->traverse(&gen);
+        }
+
         if (success && (compileOptions & SH_INTERMEDIATE_TREE))
             intermediate.outputTree(root);
 
@@ -235,40 +278,43 @@ bool TCompiler::compile(const char* const shaderStrings[],
 
     // Cleanup memory.
     intermediate.remove(parseContext.treeRoot);
-
+    SetGlobalParseContext(NULL);
     return success;
 }
 
 bool TCompiler::InitBuiltInSymbolTable(const ShBuiltInResources &resources)
 {
     compileResources = resources;
+    setResourceString();
 
     assert(symbolTable.isEmpty());
-    symbolTable.push();
+    symbolTable.push();   // COMMON_BUILTINS
+    symbolTable.push();   // ESSL1_BUILTINS
+    symbolTable.push();   // ESSL3_BUILTINS
 
     TPublicType integer;
     integer.type = EbtInt;
-    integer.size = 1;
-    integer.matrix = false;
+    integer.primarySize = 1;
+    integer.secondarySize = 1;
     integer.array = false;
 
     TPublicType floatingPoint;
     floatingPoint.type = EbtFloat;
-    floatingPoint.size = 1;
-    floatingPoint.matrix = false;
+    floatingPoint.primarySize = 1;
+    floatingPoint.secondarySize = 1;
     floatingPoint.array = false;
 
     TPublicType sampler;
-    sampler.size = 1;
-    sampler.matrix = false;
+    sampler.primarySize = 1;
+    sampler.secondarySize = 1;
     sampler.array = false;
 
     switch(shaderType)
     {
-      case SH_FRAGMENT_SHADER:
+      case GL_FRAGMENT_SHADER:
         symbolTable.setDefaultPrecision(integer, EbpMedium);
         break;
-      case SH_VERTEX_SHADER:
+      case GL_VERTEX_SHADER:
         symbolTable.setDefaultPrecision(integer, EbpHigh);
         symbolTable.setDefaultPrecision(floatingPoint, EbpHigh);
         break;
@@ -291,6 +337,34 @@ bool TCompiler::InitBuiltInSymbolTable(const ShBuiltInResources &resources)
     return true;
 }
 
+void TCompiler::setResourceString()
+{
+    std::ostringstream strstream;
+    strstream << ":MaxVertexAttribs:" << compileResources.MaxVertexAttribs
+              << ":MaxVertexUniformVectors:" << compileResources.MaxVertexUniformVectors
+              << ":MaxVaryingVectors:" << compileResources.MaxVaryingVectors
+              << ":MaxVertexTextureImageUnits:" << compileResources.MaxVertexTextureImageUnits
+              << ":MaxCombinedTextureImageUnits:" << compileResources.MaxCombinedTextureImageUnits
+              << ":MaxTextureImageUnits:" << compileResources.MaxTextureImageUnits
+              << ":MaxFragmentUniformVectors:" << compileResources.MaxFragmentUniformVectors
+              << ":MaxDrawBuffers:" << compileResources.MaxDrawBuffers
+              << ":OES_standard_derivatives:" << compileResources.OES_standard_derivatives
+              << ":OES_EGL_image_external:" << compileResources.OES_EGL_image_external
+              << ":ARB_texture_rectangle:" << compileResources.ARB_texture_rectangle
+              << ":EXT_draw_buffers:" << compileResources.EXT_draw_buffers
+              << ":FragmentPrecisionHigh:" << compileResources.FragmentPrecisionHigh
+              << ":MaxExpressionComplexity:" << compileResources.MaxExpressionComplexity
+              << ":MaxCallStackDepth:" << compileResources.MaxCallStackDepth
+              << ":EXT_frag_depth:" << compileResources.EXT_frag_depth
+              << ":EXT_shader_texture_lod:" << compileResources.EXT_shader_texture_lod
+              << ":MaxVertexOutputVectors:" << compileResources.MaxVertexOutputVectors
+              << ":MaxFragmentInputVectors:" << compileResources.MaxFragmentInputVectors
+              << ":MinProgramTexelOffset:" << compileResources.MinProgramTexelOffset
+              << ":MaxProgramTexelOffset:" << compileResources.MaxProgramTexelOffset;
+
+    builtInResourcesString = strstream.str();
+}
+
 void TCompiler::clearResults()
 {
     arrayBoundsClamper.Cleanup();
@@ -298,9 +372,13 @@ void TCompiler::clearResults()
     infoSink.obj.erase();
     infoSink.debug.erase();
 
-    attribs.clear();
+    attributes.clear();
+    outputVariables.clear();
     uniforms.clear();
+    expandedUniforms.clear();
     varyings.clear();
+    expandedVaryings.clear();
+    interfaceBlocks.clear();
 
     builtInFunctionEmulator.Cleanup();
 
@@ -333,6 +411,13 @@ bool TCompiler::detectCallDepth(TIntermNode* root, TInfoSink& infoSink, bool lim
     }
 }
 
+bool TCompiler::validateOutputs(TIntermNode* root)
+{
+    ValidateOutputs validateOutputs(infoSink.info, compileResources.MaxDrawBuffers);
+    root->traverse(&validateOutputs);
+    return (validateOutputs.numErrors() == 0);
+}
+
 void TCompiler::rewriteCSSShader(TIntermNode* root)
 {
     RenameFunction renamer("main(", "css_main(");
@@ -354,20 +439,20 @@ bool TCompiler::enforceTimingRestrictions(TIntermNode* root, bool outputGraph)
         return false;
     }
 
-    if (shaderType == SH_FRAGMENT_SHADER)
+    if (shaderType == GL_FRAGMENT_SHADER)
     {
         TDependencyGraph graph(root);
 
         // Output any errors first.
         bool success = enforceFragmentShaderTimingRestrictions(graph);
-        
+
         // Then, output the dependency graph.
         if (outputGraph)
         {
             TDependencyGraphOutput output(infoSink.info);
             output.outputAllSpanningTrees(graph);
         }
-        
+
         return success;
     }
     else
@@ -378,8 +463,15 @@ bool TCompiler::enforceTimingRestrictions(TIntermNode* root, bool outputGraph)
 
 bool TCompiler::limitExpressionComplexity(TIntermNode* root)
 {
-    TIntermTraverser traverser;
+    TMaxDepthTraverser traverser(maxExpressionComplexity+1);
     root->traverse(&traverser);
+
+    if (traverser.getMaxDepth() > maxExpressionComplexity)
+    {
+        infoSink.info << "Expression too complex.";
+        return false;
+    }
+
     TDependencyGraph graph(root);
 
     for (TFunctionCallVector::const_iterator iter = graph.beginUserDefinedFunctionCalls();
@@ -391,11 +483,6 @@ bool TCompiler::limitExpressionComplexity(TIntermNode* root)
         samplerSymbol->traverse(&graphTraverser);
     }
 
-    if (traverser.getMaxDepth() > maxExpressionComplexity)
-    {
-        infoSink.info << "Expression too complex.";
-        return false;
-    }
     return true;
 }
 
@@ -415,14 +502,24 @@ bool TCompiler::enforceVertexShaderTimingRestrictions(TIntermNode* root)
 
 void TCompiler::collectVariables(TIntermNode* root)
 {
-    CollectVariables collect(attribs, uniforms, varyings, hashFunction);
+    sh::CollectVariables collect(&attributes,
+                                 &outputVariables,
+                                 &uniforms,
+                                 &varyings,
+                                 &interfaceBlocks,
+                                 hashFunction);
     root->traverse(&collect);
+
+    // For backwards compatiblity with ShGetVariableInfo, expand struct
+    // uniforms and varyings into separate variables for each field.
+    sh::ExpandVariables(uniforms, &expandedUniforms);
+    sh::ExpandVariables(varyings, &expandedVaryings);
 }
 
 bool TCompiler::enforcePackingRestrictions()
 {
     VariablePacker packer;
-    return packer.CheckVariablesWithinPackingLimits(maxUniformVectors, uniforms);
+    return packer.CheckVariablesWithinPackingLimits(maxUniformVectors, expandedUniforms);
 }
 
 void TCompiler::initializeGLPosition(TIntermNode* root)
@@ -440,45 +537,16 @@ void TCompiler::initializeVaryingsWithoutStaticUse(TIntermNode* root)
     InitializeVariables::InitVariableInfoList variables;
     for (size_t ii = 0; ii < varyings.size(); ++ii)
     {
-        const TVariableInfo& varying = varyings[ii];
+        const sh::Varying& varying = varyings[ii];
         if (varying.staticUse)
             continue;
-        unsigned char size = 0;
-        bool matrix = false;
-        switch (varying.type)
-        {
-          case SH_FLOAT:
-            size = 1;
-            break;
-          case SH_FLOAT_VEC2:
-            size = 2;
-            break;
-          case SH_FLOAT_VEC3:
-            size = 3;
-            break;
-          case SH_FLOAT_VEC4:
-            size = 4;
-            break;
-          case SH_FLOAT_MAT2:
-            size = 2;
-            matrix = true;
-            break;
-          case SH_FLOAT_MAT3:
-            size = 3;
-            matrix = true;
-            break;
-          case SH_FLOAT_MAT4:
-            size = 4;
-            matrix = true;
-            break;
-          default:
-            ASSERT(false);
-        }
-        TType type(EbtFloat, EbpUndefined, EvqVaryingOut, size, matrix, varying.isArray);
+        unsigned char primarySize = static_cast<unsigned char>(gl::VariableColumnCount(varying.type));
+        unsigned char secondarySize = static_cast<unsigned char>(gl::VariableRowCount(varying.type));
+        TType type(EbtFloat, EbpUndefined, EvqVaryingOut, primarySize, secondarySize, varying.isArray());
         TString name = varying.name.c_str();
-        if (varying.isArray)
+        if (varying.isArray())
         {
-            type.setArraySize(varying.size);
+            type.setArraySize(varying.arraySize);
             name = name.substr(0, name.find_first_of('['));
         }
 
@@ -489,18 +557,6 @@ void TCompiler::initializeVaryingsWithoutStaticUse(TIntermNode* root)
     root->traverse(&initializer);
 }
 
-void TCompiler::mapLongVariableNames(TIntermNode* root)
-{
-    ASSERT(longNameMap);
-    MapLongVariableNames map(longNameMap);
-    root->traverse(&map);
-}
-
-int TCompiler::getMappedNameMaxLength() const
-{
-    return MAX_SHORTENED_IDENTIFIER_SIZE + 1;
-}
-
 const TExtensionBehavior& TCompiler::getExtensionBehavior() const
 {
     return extensionBehavior;
diff --git a/src/3rdparty/angle/src/compiler/translator/ShHandle.h b/src/3rdparty/angle/src/compiler/translator/Compiler.h
index 54ae27852d..ca0c157884 100644
--- a/src/3rdparty/angle/src/compiler/translator/ShHandle.h
+++ b/src/3rdparty/angle/src/compiler/translator/Compiler.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -14,8 +14,6 @@
 // This should not be included by driver code.
 //
 
-#include "GLSLANG/ShaderLang.h"
-
 #include "compiler/translator/BuiltInFunctionEmulator.h"
 #include "compiler/translator/ExtensionBehavior.h"
 #include "compiler/translator/HashNames.h"
@@ -24,7 +22,6 @@
 #include "compiler/translator/VariableInfo.h"
 #include "third_party/compiler/ArrayBoundsClamper.h"
 
-class LongNameMap;
 class TCompiler;
 class TDependencyGraph;
 class TranslatorHLSL;
@@ -33,7 +30,7 @@ class TranslatorHLSL;
 // Helper function to identify specs that are based on the WebGL spec,
 // like the CSS Shaders spec.
 //
-bool isWebGLBasedSpec(ShShaderSpec spec);
+bool IsWebGLBasedSpec(ShShaderSpec spec);
 
 //
 // The base class used to back handles returned to the driver.
@@ -55,9 +52,10 @@ protected:
 // The base class for the machine dependent compiler to derive from
 // for managing object code from the compile.
 //
-class TCompiler : public TShHandleBase {
-public:
-    TCompiler(ShShaderType type, ShShaderSpec spec);
+class TCompiler : public TShHandleBase
+{
+  public:
+    TCompiler(sh::GLenum type, ShShaderSpec spec, ShShaderOutput output);
     virtual ~TCompiler();
     virtual TCompiler* getAsCompiler() { return this; }
 
@@ -67,25 +65,39 @@ public:
                  int compileOptions);
 
     // Get results of the last compilation.
+    int getShaderVersion() const { return shaderVersion; }
     TInfoSink& getInfoSink() { return infoSink; }
-    const TVariableInfoList& getAttribs() const { return attribs; }
-    const TVariableInfoList& getUniforms() const { return uniforms; }
-    const TVariableInfoList& getVaryings() const { return varyings; }
-    int getMappedNameMaxLength() const;
+
+    const std::vector<sh::Attribute> &getAttributes() const { return attributes; }
+    const std::vector<sh::Attribute> &getOutputVariables() const { return outputVariables; }
+    const std::vector<sh::Uniform> &getUniforms() const { return uniforms; }
+    const std::vector<sh::ShaderVariable> &getExpandedUniforms() const { return expandedUniforms; }
+    const std::vector<sh::Varying> &getVaryings() const { return varyings; }
+    const std::vector<sh::ShaderVariable> &getExpandedVaryings() const { return expandedVaryings; }
+    const std::vector<sh::InterfaceBlock> &getInterfaceBlocks() const { return interfaceBlocks; }
 
     ShHashFunction64 getHashFunction() const { return hashFunction; }
     NameMap& getNameMap() { return nameMap; }
     TSymbolTable& getSymbolTable() { return symbolTable; }
-
-protected:
-    ShShaderType getShaderType() const { return shaderType; }
     ShShaderSpec getShaderSpec() const { return shaderSpec; }
+    ShShaderOutput getOutputType() const { return outputType; }
+    std::string getBuiltInResourcesString() const { return builtInResourcesString; }
+
+    // Get the resources set by InitBuiltInSymbolTable
+    const ShBuiltInResources& getResources() const;
+
+  protected:
+    sh::GLenum getShaderType() const { return shaderType; }
     // Initialize symbol-table with built-in symbols.
     bool InitBuiltInSymbolTable(const ShBuiltInResources& resources);
+    // Compute the string representation of the built-in resources
+    void setResourceString();
     // Clears the results from the previous compilation.
     void clearResults();
     // Return true if function recursion is detected or call depth exceeded.
     bool detectCallDepth(TIntermNode* root, TInfoSink& infoSink, bool limitCallStackDepth);
+    // Returns true if a program has no conflicting or missing fragment outputs
+    bool validateOutputs(TIntermNode* root);
     // Rewrites a shader's intermediate tree according to the CSS Shaders spec.
     void rewriteCSSShader(TIntermNode* root);
     // Returns true if the given shader does not exceed the minimum
@@ -93,8 +105,6 @@ protected:
     bool validateLimitations(TIntermNode* root);
     // Collect info for all attribs, uniforms, varyings.
     void collectVariables(TIntermNode* root);
-    // Map long variable names into shorter ones.
-    void mapLongVariableNames(TIntermNode* root);
     // Translate to object code.
     virtual void translate(TIntermNode* root) = 0;
     // Returns true if, after applying the packing rules in the GLSL 1.017 spec
@@ -114,29 +124,37 @@ protected:
     bool enforceTimingRestrictions(TIntermNode* root, bool outputGraph);
     // Returns true if the shader does not use samplers.
     bool enforceVertexShaderTimingRestrictions(TIntermNode* root);
-    // Returns true if the shader does not use sampler dependent values to affect control 
+    // Returns true if the shader does not use sampler dependent values to affect control
     // flow or in operations whose time can depend on the input values.
     bool enforceFragmentShaderTimingRestrictions(const TDependencyGraph& graph);
-    // Return true if the maximum expression complexity below the limit.
+    // Return true if the maximum expression complexity is below the limit.
     bool limitExpressionComplexity(TIntermNode* root);
     // Get built-in extensions with default behavior.
     const TExtensionBehavior& getExtensionBehavior() const;
-    // Get the resources set by InitBuiltInSymbolTable
-    const ShBuiltInResources& getResources() const;
 
     const ArrayBoundsClamper& getArrayBoundsClamper() const;
     ShArrayIndexClampingStrategy getArrayIndexClampingStrategy() const;
     const BuiltInFunctionEmulator& getBuiltInFunctionEmulator() const;
 
-private:
-    ShShaderType shaderType;
+    std::vector<sh::Attribute> attributes;
+    std::vector<sh::Attribute> outputVariables;
+    std::vector<sh::Uniform> uniforms;
+    std::vector<sh::ShaderVariable> expandedUniforms;
+    std::vector<sh::Varying> varyings;
+    std::vector<sh::ShaderVariable> expandedVaryings;
+    std::vector<sh::InterfaceBlock> interfaceBlocks;
+
+  private:
+    sh::GLenum shaderType;
     ShShaderSpec shaderSpec;
+    ShShaderOutput outputType;
 
     int maxUniformVectors;
     int maxExpressionComplexity;
     int maxCallStackDepth;
 
     ShBuiltInResources compileResources;
+    std::string builtInResourcesString;
 
     // Built-in symbol table for the given language, spec, and resources.
     // It is preserved from compile-to-compile.
@@ -150,13 +168,8 @@ private:
     BuiltInFunctionEmulator builtInFunctionEmulator;
 
     // Results of compilation.
+    int shaderVersion;
     TInfoSink infoSink;  // Output sink.
-    TVariableInfoList attribs;  // Active attributes in the compiled shader.
-    TVariableInfoList uniforms;  // Active uniforms in the compiled shader.
-    TVariableInfoList varyings;  // Varyings in the compiled shader.
-
-    // Cached copy of the ref-counted singleton.
-    LongNameMap* longNameMap;
 
     // name hashing.
     ShHashFunction64 hashFunction;
@@ -168,12 +181,12 @@ private:
 // and the machine dependent code.
 //
 // The machine dependent code should derive from the classes
-// above. Then Construct*() and Delete*() will create and 
+// above. Then Construct*() and Delete*() will create and
 // destroy the machine dependent objects, which contain the
 // above machine independent information.
 //
 TCompiler* ConstructCompiler(
-    ShShaderType type, ShShaderSpec spec, ShShaderOutput output);
+    sh::GLenum type, ShShaderSpec spec, ShShaderOutput output);
 void DeleteCompiler(TCompiler*);
 
 #endif // _SHHANDLE_INCLUDED_
diff --git a/src/3rdparty/angle/src/compiler/translator/ConstantUnion.h b/src/3rdparty/angle/src/compiler/translator/ConstantUnion.h
index b1e37885f9..5e86c64805 100644
--- a/src/3rdparty/angle/src/compiler/translator/ConstantUnion.h
+++ b/src/3rdparty/angle/src/compiler/translator/ConstantUnion.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -18,14 +18,74 @@ public:
         type = EbtVoid;
     }
 
+    bool cast(TBasicType newType, const ConstantUnion &constant)
+    {
+        switch (newType)
+        {
+          case EbtFloat:
+            switch (constant.type)
+            {
+              case EbtInt:   setFConst(static_cast<float>(constant.getIConst())); break;
+              case EbtUInt:  setFConst(static_cast<float>(constant.getUConst())); break;
+              case EbtBool:  setFConst(static_cast<float>(constant.getBConst())); break;
+              case EbtFloat: setFConst(static_cast<float>(constant.getFConst())); break;
+              default:       return false;
+            }
+            break;
+          case EbtInt:
+            switch (constant.type)
+            {
+              case EbtInt:   setIConst(static_cast<int>(constant.getIConst())); break;
+              case EbtUInt:  setIConst(static_cast<int>(constant.getUConst())); break;
+              case EbtBool:  setIConst(static_cast<int>(constant.getBConst())); break;
+              case EbtFloat: setIConst(static_cast<int>(constant.getFConst())); break;
+              default:       return false;
+            }
+            break;
+          case EbtUInt:
+            switch (constant.type)
+            {
+              case EbtInt:   setUConst(static_cast<unsigned int>(constant.getIConst())); break;
+              case EbtUInt:  setUConst(static_cast<unsigned int>(constant.getUConst())); break;
+              case EbtBool:  setUConst(static_cast<unsigned int>(constant.getBConst())); break;
+              case EbtFloat: setUConst(static_cast<unsigned int>(constant.getFConst())); break;
+              default:       return false;
+            }
+            break;
+          case EbtBool:
+            switch (constant.type)
+            {
+              case EbtInt:   setBConst(constant.getIConst() != 0);    break;
+              case EbtUInt:  setBConst(constant.getUConst() != 0);    break;
+              case EbtBool:  setBConst(constant.getBConst());         break;
+              case EbtFloat: setBConst(constant.getFConst() != 0.0f); break;
+              default:       return false;
+            }
+            break;
+          case EbtStruct:    // Struct fields don't get cast
+            switch (constant.type)
+            {
+              case EbtInt:   setIConst(constant.getIConst()); break;
+              case EbtUInt:  setUConst(constant.getUConst()); break;
+              case EbtBool:  setBConst(constant.getBConst()); break;
+              case EbtFloat: setFConst(constant.getFConst()); break;
+              default:       return false;
+            }
+            break;
+          default:
+            return false;
+        }
+
+        return true;
+    }
+
     void setIConst(int i) {iConst = i; type = EbtInt; }
+    void setUConst(unsigned int u) { uConst = u; type = EbtUInt; }
     void setFConst(float f) {fConst = f; type = EbtFloat; }
     void setBConst(bool b) {bConst = b; type = EbtBool; }
 
-    int getIConst() { return iConst; }
-    float getFConst() { return fConst; }
-    bool getBConst() { return bConst; }
     int getIConst() const { return iConst; }
+    unsigned int getUConst() const { return uConst; }
     float getFConst() const { return fConst; }
     bool getBConst() const { return bConst; }
 
@@ -34,6 +94,11 @@ public:
         return i == iConst;
     }
 
+    bool operator==(const unsigned int u) const
+    {
+        return u == uConst;
+    }
+
     bool operator==(const float f) const
     {
         return f == fConst;
@@ -52,6 +117,8 @@ public:
         switch (type) {
         case EbtInt:
             return constant.iConst == iConst;
+        case EbtUInt:
+            return constant.uConst == uConst;
         case EbtFloat:
             return constant.fConst == fConst;
         case EbtBool:
@@ -66,6 +133,11 @@ public:
         return !operator==(i);
     }
 
+    bool operator!=(const unsigned int u) const
+    {
+        return !operator==(u);
+    }
+
     bool operator!=(const float f) const
     {
         return !operator==(f);
@@ -87,6 +159,8 @@ public:
         switch (type) {
         case EbtInt:
             return iConst > constant.iConst;
+        case EbtUInt:
+            return uConst > constant.uConst;
         case EbtFloat:
             return fConst > constant.fConst;
         default:
@@ -100,6 +174,8 @@ public:
         switch (type) {
         case EbtInt:
             return iConst < constant.iConst;
+        case EbtUInt:
+            return uConst < constant.uConst;
         case EbtFloat:
             return fConst < constant.fConst;
         default:
@@ -113,6 +189,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt: returnValue.setIConst(iConst + constant.iConst); break;
+        case EbtUInt: returnValue.setUConst(uConst + constant.uConst); break;
         case EbtFloat: returnValue.setFConst(fConst + constant.fConst); break;
         default: assert(false && "Default missing");
         }
@@ -126,6 +203,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt: returnValue.setIConst(iConst - constant.iConst); break;
+        case EbtUInt: returnValue.setUConst(uConst - constant.uConst); break;
         case EbtFloat: returnValue.setFConst(fConst - constant.fConst); break;
         default: assert(false && "Default missing");
         }
@@ -139,6 +217,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt: returnValue.setIConst(iConst * constant.iConst); break;
+        case EbtUInt: returnValue.setUConst(uConst * constant.uConst); break;
         case EbtFloat: returnValue.setFConst(fConst * constant.fConst); break; 
         default: assert(false && "Default missing");
         }
@@ -152,6 +231,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt: returnValue.setIConst(iConst % constant.iConst); break;
+        case EbtUInt: returnValue.setUConst(uConst % constant.uConst); break;
         default:     assert(false && "Default missing");
         }
 
@@ -164,6 +244,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt: returnValue.setIConst(iConst >> constant.iConst); break;
+        case EbtUInt: returnValue.setUConst(uConst >> constant.uConst); break;
         default:     assert(false && "Default missing");
         }
 
@@ -176,6 +257,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt: returnValue.setIConst(iConst << constant.iConst); break;
+        case EbtUInt: returnValue.setUConst(uConst << constant.uConst); break;
         default:     assert(false && "Default missing");
         }
 
@@ -188,6 +270,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt:  returnValue.setIConst(iConst & constant.iConst); break;
+        case EbtUInt:  returnValue.setUConst(uConst & constant.uConst); break;
         default:     assert(false && "Default missing");
         }
 
@@ -200,6 +283,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt:  returnValue.setIConst(iConst | constant.iConst); break;
+        case EbtUInt:  returnValue.setUConst(uConst | constant.uConst); break;
         default:     assert(false && "Default missing");
         }
 
@@ -212,6 +296,7 @@ public:
         assert(type == constant.type);
         switch (type) {
         case EbtInt:  returnValue.setIConst(iConst ^ constant.iConst); break;
+        case EbtUInt:  returnValue.setUConst(uConst ^ constant.uConst); break;
         default:     assert(false && "Default missing");
         }
 
@@ -247,6 +332,7 @@ private:
 
     union  {
         int iConst;  // used for ivec, scalar ints
+        unsigned int uConst; // used for uvec, scalar uints
         bool bConst; // used for bvec, scalar bools
         float fConst;   // used for vec, mat, scalar floats
     } ;
diff --git a/src/3rdparty/angle/src/compiler/translator/DetectCallDepth.h b/src/3rdparty/angle/src/compiler/translator/DetectCallDepth.h
index 5e7f23d15f..86810650dc 100644
--- a/src/3rdparty/angle/src/compiler/translator/DetectCallDepth.h
+++ b/src/3rdparty/angle/src/compiler/translator/DetectCallDepth.h
@@ -7,10 +7,8 @@
 #ifndef COMPILER_DETECT_RECURSION_H_
 #define COMPILER_DETECT_RECURSION_H_
 
-#include "GLSLANG/ShaderLang.h"
-
 #include <limits.h>
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/VariableInfo.h"
 
 class TInfoSink;
diff --git a/src/3rdparty/angle/src/compiler/translator/DetectDiscontinuity.h b/src/3rdparty/angle/src/compiler/translator/DetectDiscontinuity.h
index 1dd8be9233..35d66cbc2e 100644
--- a/src/3rdparty/angle/src/compiler/translator/DetectDiscontinuity.h
+++ b/src/3rdparty/angle/src/compiler/translator/DetectDiscontinuity.h
@@ -11,7 +11,7 @@
 #ifndef COMPILER_DETECTDISCONTINUITY_H_
 #define COMPILER_DETECTDISCONTINUITY_H_
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 namespace sh
 {
diff --git a/src/3rdparty/angle/src/compiler/translator/Diagnostics.cpp b/src/3rdparty/angle/src/compiler/translator/Diagnostics.cpp
index 99506c0849..92db3e55cf 100644
--- a/src/3rdparty/angle/src/compiler/translator/Diagnostics.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/Diagnostics.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
diff --git a/src/3rdparty/angle/src/compiler/translator/Diagnostics.h b/src/3rdparty/angle/src/compiler/translator/Diagnostics.h
index cb71bb1204..664da7803b 100644
--- a/src/3rdparty/angle/src/compiler/translator/Diagnostics.h
+++ b/src/3rdparty/angle/src/compiler/translator/Diagnostics.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
diff --git a/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.cpp b/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.cpp
index 662c8ae624..59d2835f7b 100644
--- a/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -26,9 +26,11 @@ static TBehavior getBehavior(const std::string& str)
 }
 
 TDirectiveHandler::TDirectiveHandler(TExtensionBehavior& extBehavior,
-                                     TDiagnostics& diagnostics)
+                                     TDiagnostics& diagnostics,
+                                     int& shaderVersion)
     : mExtensionBehavior(extBehavior),
-      mDiagnostics(diagnostics)
+      mDiagnostics(diagnostics),
+      mShaderVersion(shaderVersion)
 {
 }
 
@@ -148,9 +150,12 @@ void TDirectiveHandler::handleExtension(const pp::SourceLocation& loc,
 void TDirectiveHandler::handleVersion(const pp::SourceLocation& loc,
                                       int version)
 {
-    static const int kVersion = 100;
-
-    if (version != kVersion)
+    if (version == 100 ||
+        version == 300)
+    {
+        mShaderVersion = version;
+    }
+    else
     {
         std::stringstream stream;
         stream << version;
diff --git a/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.h b/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.h
index eb5f055494..69418c277a 100644
--- a/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.h
+++ b/src/3rdparty/angle/src/compiler/translator/DirectiveHandler.h
@@ -17,7 +17,8 @@ class TDirectiveHandler : public pp::DirectiveHandler
 {
   public:
     TDirectiveHandler(TExtensionBehavior& extBehavior,
-                      TDiagnostics& diagnostics);
+                      TDiagnostics& diagnostics,
+                      int& shaderVersion);
     virtual ~TDirectiveHandler();
 
     const TPragma& pragma() const { return mPragma; }
@@ -41,6 +42,7 @@ class TDirectiveHandler : public pp::DirectiveHandler
     TPragma mPragma;
     TExtensionBehavior& mExtensionBehavior;
     TDiagnostics& mDiagnostics;
+    int& mShaderVersion;
 };
 
 #endif  // COMPILER_DIRECTIVE_HANDLER_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/FlagStd140Structs.cpp b/src/3rdparty/angle/src/compiler/translator/FlagStd140Structs.cpp
new file mode 100644
index 0000000000..a751b768b7
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/FlagStd140Structs.cpp
@@ -0,0 +1,77 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "compiler/translator/FlagStd140Structs.h"
+
+namespace sh
+{
+
+bool FlagStd140Structs::visitBinary(Visit visit, TIntermBinary *binaryNode)
+{
+    if (binaryNode->getRight()->getBasicType() == EbtStruct)
+    {
+        switch (binaryNode->getOp())
+        {
+          case EOpIndexDirectInterfaceBlock:
+          case EOpIndexDirectStruct:
+            if (isInStd140InterfaceBlock(binaryNode->getLeft()))
+            {
+                mFlaggedNodes.push_back(binaryNode);
+            }
+            break;
+
+          default: break;
+        }
+        return false;
+    }
+
+    if (binaryNode->getOp() == EOpIndexDirectStruct)
+    {
+        return false;
+    }
+
+    return visit == PreVisit;
+}
+
+void FlagStd140Structs::visitSymbol(TIntermSymbol *symbol)
+{
+    if (isInStd140InterfaceBlock(symbol) && symbol->getBasicType() == EbtStruct)
+    {
+        mFlaggedNodes.push_back(symbol);
+    }
+}
+
+bool FlagStd140Structs::isInStd140InterfaceBlock(TIntermTyped *node) const
+{
+    TIntermBinary *binaryNode = node->getAsBinaryNode();
+
+    if (binaryNode)
+    {
+        return isInStd140InterfaceBlock(binaryNode->getLeft());
+    }
+
+    const TType &type = node->getType();
+
+    // determine if we are in the standard layout
+    const TInterfaceBlock *interfaceBlock = type.getInterfaceBlock();
+    if (interfaceBlock)
+    {
+        return (interfaceBlock->blockStorage() == EbsStd140);
+    }
+
+    return false;
+}
+
+std::vector<TIntermTyped *> FlagStd140ValueStructs(TIntermNode *node)
+{
+    FlagStd140Structs flaggingTraversal;
+
+    node->traverse(&flaggingTraversal);
+
+    return flaggingTraversal.getFlaggedNodes();
+}
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/FlagStd140Structs.h b/src/3rdparty/angle/src/compiler/translator/FlagStd140Structs.h
new file mode 100644
index 0000000000..c93a6f808e
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/FlagStd140Structs.h
@@ -0,0 +1,37 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#ifndef COMPILER_FLAGSTD140STRUCTS_H_
+#define COMPILER_FLAGSTD140STRUCTS_H_
+
+#include "compiler/translator/IntermNode.h"
+
+namespace sh
+{
+
+// This class finds references to nested structs of std140 blocks that access
+// the nested struct "by value", where the padding added in the translator
+// conflicts with the "natural" unpadded type.
+class FlagStd140Structs : public TIntermTraverser
+{
+  public:
+    const std::vector<TIntermTyped *> getFlaggedNodes() const { return mFlaggedNodes; }
+
+  protected:
+    virtual bool visitBinary(Visit visit, TIntermBinary *binaryNode);
+    virtual void visitSymbol(TIntermSymbol *symbol);
+
+  private:
+    bool isInStd140InterfaceBlock(TIntermTyped *node) const;
+
+    std::vector<TIntermTyped *> mFlaggedNodes;
+};
+
+std::vector<TIntermTyped *> FlagStd140ValueStructs(TIntermNode *node);
+
+}
+
+#endif // COMPILER_FLAGSTD140STRUCTS_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.cpp b/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.cpp
index 89e6f1a62b..f3be20d978 100644
--- a/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.cpp
@@ -6,210 +6,77 @@
 
 #include "compiler/translator/ForLoopUnroll.h"
 
-namespace {
-
-class IntegerForLoopUnrollMarker : public TIntermTraverser {
-public:
-
-    virtual bool visitLoop(Visit, TIntermLoop* node)
-    {
-        // This is called after ValidateLimitations pass, so all the ASSERT
-        // should never fail.
-        // See ValidateLimitations::validateForLoopInit().
-        ASSERT(node);
-        ASSERT(node->getType() == ELoopFor);
-        ASSERT(node->getInit());
-        TIntermAggregate* decl = node->getInit()->getAsAggregate();
-        ASSERT(decl && decl->getOp() == EOpDeclaration);
-        TIntermSequence& declSeq = decl->getSequence();
-        ASSERT(declSeq.size() == 1);
-        TIntermBinary* declInit = declSeq[0]->getAsBinaryNode();
-        ASSERT(declInit && declInit->getOp() == EOpInitialize);
-        ASSERT(declInit->getLeft());
-        TIntermSymbol* symbol = declInit->getLeft()->getAsSymbolNode();
-        ASSERT(symbol);
-        TBasicType type = symbol->getBasicType();
-        ASSERT(type == EbtInt || type == EbtFloat);
-        if (type == EbtInt)
-            node->setUnrollFlag(true);
-        return true;
-    }
-
-};
-
-}  // anonymous namepsace
-
-void ForLoopUnroll::FillLoopIndexInfo(TIntermLoop* node, TLoopIndexInfo& info)
+bool ForLoopUnrollMarker::visitBinary(Visit, TIntermBinary *node)
 {
-    ASSERT(node->getType() == ELoopFor);
-    ASSERT(node->getUnrollFlag());
-
-    TIntermNode* init = node->getInit();
-    ASSERT(init != NULL);
-    TIntermAggregate* decl = init->getAsAggregate();
-    ASSERT((decl != NULL) && (decl->getOp() == EOpDeclaration));
-    TIntermSequence& declSeq = decl->getSequence();
-    ASSERT(declSeq.size() == 1);
-    TIntermBinary* declInit = declSeq[0]->getAsBinaryNode();
-    ASSERT((declInit != NULL) && (declInit->getOp() == EOpInitialize));
-    TIntermSymbol* symbol = declInit->getLeft()->getAsSymbolNode();
-    ASSERT(symbol != NULL);
-    ASSERT(symbol->getBasicType() == EbtInt);
-
-    info.id = symbol->getId();
-
-    ASSERT(declInit->getRight() != NULL);
-    TIntermConstantUnion* initNode = declInit->getRight()->getAsConstantUnion();
-    ASSERT(initNode != NULL);
-
-    info.initValue = evaluateIntConstant(initNode);
-    info.currentValue = info.initValue;
-
-    TIntermNode* cond = node->getCondition();
-    ASSERT(cond != NULL);
-    TIntermBinary* binOp = cond->getAsBinaryNode();
-    ASSERT(binOp != NULL);
-    ASSERT(binOp->getRight() != NULL);
-    ASSERT(binOp->getRight()->getAsConstantUnion() != NULL);
-
-    info.incrementValue = getLoopIncrement(node);
-    info.stopValue = evaluateIntConstant(
-        binOp->getRight()->getAsConstantUnion());
-    info.op = binOp->getOp();
-}
-
-void ForLoopUnroll::Step()
-{
-    ASSERT(mLoopIndexStack.size() > 0);
-    TLoopIndexInfo& info = mLoopIndexStack[mLoopIndexStack.size() - 1];
-    info.currentValue += info.incrementValue;
-}
+    if (mUnrollCondition != kSamplerArrayIndex)
+        return true;
 
-bool ForLoopUnroll::SatisfiesLoopCondition()
-{
-    ASSERT(mLoopIndexStack.size() > 0);
-    TLoopIndexInfo& info = mLoopIndexStack[mLoopIndexStack.size() - 1];
-    // Relational operator is one of: > >= < <= == or !=.
-    switch (info.op) {
-      case EOpEqual:
-        return (info.currentValue == info.stopValue);
-      case EOpNotEqual:
-        return (info.currentValue != info.stopValue);
-      case EOpLessThan:
-        return (info.currentValue < info.stopValue);
-      case EOpGreaterThan:
-        return (info.currentValue > info.stopValue);
-      case EOpLessThanEqual:
-        return (info.currentValue <= info.stopValue);
-      case EOpGreaterThanEqual:
-        return (info.currentValue >= info.stopValue);
+    // If a sampler array index is also the loop index,
+    //   1) if the index type is integer, mark the loop for unrolling;
+    //   2) if the index type if float, set a flag to later fail compile.
+    switch (node->getOp())
+    {
+      case EOpIndexIndirect:
+        if (node->getLeft() != NULL && node->getRight() != NULL && node->getLeft()->getAsSymbolNode())
+        {
+            TIntermSymbol *symbol = node->getLeft()->getAsSymbolNode();
+            if (IsSampler(symbol->getBasicType()) && symbol->isArray() && !mLoopStack.empty())
+            {
+                mVisitSamplerArrayIndexNodeInsideLoop = true;
+                node->getRight()->traverse(this);
+                mVisitSamplerArrayIndexNodeInsideLoop = false;
+                // We have already visited all the children.
+                return false;
+            }
+        }
+        break;
       default:
-        UNREACHABLE();
+        break;
     }
-    return false;
+    return true;
 }
 
-bool ForLoopUnroll::NeedsToReplaceSymbolWithValue(TIntermSymbol* symbol)
+bool ForLoopUnrollMarker::visitLoop(Visit, TIntermLoop *node)
 {
-    for (TVector<TLoopIndexInfo>::iterator i = mLoopIndexStack.begin();
-         i != mLoopIndexStack.end();
-         ++i) {
-        if (i->id == symbol->getId())
-            return true;
+    if (mUnrollCondition == kIntegerIndex)
+    {
+        // Check if loop index type is integer.
+        // This is called after ValidateLimitations pass, so all the calls
+        // should be valid. See ValidateLimitations::validateForLoopInit().
+        TIntermSequence *declSeq = node->getInit()->getAsAggregate()->getSequence();
+        TIntermSymbol *symbol = (*declSeq)[0]->getAsBinaryNode()->getLeft()->getAsSymbolNode();
+        if (symbol->getBasicType() == EbtInt)
+            node->setUnrollFlag(true);
     }
-    return false;
-}
 
-int ForLoopUnroll::GetLoopIndexValue(TIntermSymbol* symbol)
-{
-    for (TVector<TLoopIndexInfo>::iterator i = mLoopIndexStack.begin();
-         i != mLoopIndexStack.end();
-         ++i) {
-        if (i->id == symbol->getId())
-            return i->currentValue;
+    TIntermNode *body = node->getBody();
+    if (body != NULL)
+    {
+        mLoopStack.push(node);
+        body->traverse(this);
+        mLoopStack.pop();
     }
-    UNREACHABLE();
+    // The loop is fully processed - no need to visit children.
     return false;
 }
 
-void ForLoopUnroll::Push(TLoopIndexInfo& info)
-{
-    mLoopIndexStack.push_back(info);
-}
-
-void ForLoopUnroll::Pop()
+void ForLoopUnrollMarker::visitSymbol(TIntermSymbol* symbol)
 {
-    mLoopIndexStack.pop_back();
-}
-
-// static
-void ForLoopUnroll::MarkForLoopsWithIntegerIndicesForUnrolling(
-    TIntermNode* root)
-{
-    ASSERT(root);
-
-    IntegerForLoopUnrollMarker marker;
-    root->traverse(&marker);
-}
-
-int ForLoopUnroll::getLoopIncrement(TIntermLoop* node)
-{
-    TIntermNode* expr = node->getExpression();
-    ASSERT(expr != NULL);
-    // for expression has one of the following forms:
-    //     loop_index++
-    //     loop_index--
-    //     loop_index += constant_expression
-    //     loop_index -= constant_expression
-    //     ++loop_index
-    //     --loop_index
-    // The last two forms are not specified in the spec, but I am assuming
-    // its an oversight.
-    TIntermUnary* unOp = expr->getAsUnaryNode();
-    TIntermBinary* binOp = unOp ? NULL : expr->getAsBinaryNode();
-
-    TOperator op = EOpNull;
-    TIntermConstantUnion* incrementNode = NULL;
-    if (unOp != NULL) {
-        op = unOp->getOp();
-    } else if (binOp != NULL) {
-        op = binOp->getOp();
-        ASSERT(binOp->getRight() != NULL);
-        incrementNode = binOp->getRight()->getAsConstantUnion();
-        ASSERT(incrementNode != NULL);
-    }
-
-    int increment = 0;
-    // The operator is one of: ++ -- += -=.
-    switch (op) {
-        case EOpPostIncrement:
-        case EOpPreIncrement:
-            ASSERT((unOp != NULL) && (binOp == NULL));
-            increment = 1;
-            break;
-        case EOpPostDecrement:
-        case EOpPreDecrement:
-            ASSERT((unOp != NULL) && (binOp == NULL));
-            increment = -1;
-            break;
-        case EOpAddAssign:
-            ASSERT((unOp == NULL) && (binOp != NULL));
-            increment = evaluateIntConstant(incrementNode);
+    if (!mVisitSamplerArrayIndexNodeInsideLoop)
+        return;
+    TIntermLoop *loop = mLoopStack.findLoop(symbol);
+    if (loop)
+    {
+        switch (symbol->getBasicType())
+        {
+          case EbtFloat:
+            mSamplerArrayIndexIsFloatLoopIndex = true;
             break;
-        case EOpSubAssign:
-            ASSERT((unOp == NULL) && (binOp != NULL));
-            increment = - evaluateIntConstant(incrementNode);
+          case EbtInt:
+            loop->setUnrollFlag(true);
             break;
-        default:
-            ASSERT(false);
+          default:
+            UNREACHABLE();
+        }
     }
-
-    return increment;
-}
-
-int ForLoopUnroll::evaluateIntConstant(TIntermConstantUnion* node)
-{
-    ASSERT((node != NULL) && (node->getUnionArrayPointer() != NULL));
-    return node->getIConst(0);
 }
-
diff --git a/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.h b/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.h
index afd70d1fd2..a820d2a20d 100644
--- a/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.h
+++ b/src/3rdparty/angle/src/compiler/translator/ForLoopUnroll.h
@@ -7,46 +7,44 @@
 #ifndef COMPILER_FORLOOPUNROLL_H_
 #define COMPILER_FORLOOPUNROLL_H_
 
-#include "compiler/translator/intermediate.h"
-
-struct TLoopIndexInfo {
-    int id;
-    int initValue;
-    int stopValue;
-    int incrementValue;
-    TOperator op;
-    int currentValue;
-};
-
-class ForLoopUnroll {
-public:
-    ForLoopUnroll() { }
-
-    void FillLoopIndexInfo(TIntermLoop* node, TLoopIndexInfo& info);
-
-    // Update the info.currentValue for the next loop iteration.
-    void Step();
-
-    // Return false if loop condition is no longer satisfied.
-    bool SatisfiesLoopCondition();
-
-    // Check if the symbol is the index of a loop that's unrolled.
-    bool NeedsToReplaceSymbolWithValue(TIntermSymbol* symbol);
-
-    // Return the current value of a given loop index symbol.
-    int GetLoopIndexValue(TIntermSymbol* symbol);
-
-    void Push(TLoopIndexInfo& info);
-    void Pop();
-
-    static void MarkForLoopsWithIntegerIndicesForUnrolling(TIntermNode* root);
-
-private:
-    int getLoopIncrement(TIntermLoop* node);
-
-    int evaluateIntConstant(TIntermConstantUnion* node);
-
-    TVector<TLoopIndexInfo> mLoopIndexStack;
+#include "compiler/translator/LoopInfo.h"
+
+// This class detects for-loops that needs to be unrolled.
+// Currently we support two unroll conditions:
+//   1) kForLoopWithIntegerIndex: unroll if the index type is integer.
+//   2) kForLoopWithSamplerArrayIndex: unroll where a sampler array index
+//      is also the loop integer index, and reject and fail a compile
+//      where a sampler array index is also the loop float index.
+class ForLoopUnrollMarker : public TIntermTraverser
+{
+  public:
+    enum UnrollCondition
+    {
+        kIntegerIndex,
+        kSamplerArrayIndex
+    };
+
+    ForLoopUnrollMarker(UnrollCondition condition)
+        : mUnrollCondition(condition),
+          mSamplerArrayIndexIsFloatLoopIndex(false),
+          mVisitSamplerArrayIndexNodeInsideLoop(false)
+    {
+    }
+
+    virtual bool visitBinary(Visit, TIntermBinary *node);
+    virtual bool visitLoop(Visit, TIntermLoop *node);
+    virtual void visitSymbol(TIntermSymbol *node);
+
+    bool samplerArrayIndexIsFloatLoopIndex() const
+    {
+        return mSamplerArrayIndexIsFloatLoopIndex;
+    }
+
+  private:
+    UnrollCondition mUnrollCondition;
+    TLoopStack mLoopStack;
+    bool mSamplerArrayIndexIsFloatLoopIndex;
+    bool mVisitSamplerArrayIndexNodeInsideLoop;
 };
 
 #endif
diff --git a/src/3rdparty/angle/src/compiler/translator/HashNames.h b/src/3rdparty/angle/src/compiler/translator/HashNames.h
index 751265b759..26546a3e7b 100644
--- a/src/3rdparty/angle/src/compiler/translator/HashNames.h
+++ b/src/3rdparty/angle/src/compiler/translator/HashNames.h
@@ -9,8 +9,7 @@
 
 #include <map>
 
-#include "compiler/translator/intermediate.h"
-#include "GLSLANG/ShaderLang.h"
+#include "compiler/translator/IntermNode.h"
 
 #define HASHED_NAME_PREFIX "webgl_"
 
diff --git a/src/3rdparty/angle/src/compiler/translator/Initialize.cpp b/src/3rdparty/angle/src/compiler/translator/Initialize.cpp
index db728b2129..10b21e6d28 100644
--- a/src/3rdparty/angle/src/compiler/translator/Initialize.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/Initialize.cpp
@@ -1,424 +1,601 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 //
-// Create strings that declare built-in definitions, add built-ins that
+// Create symbols that declare built-in definitions, add built-ins that
 // cannot be expressed in the files, and establish mappings between 
 // built-in functions and operators.
 //
 
 #include "compiler/translator/Initialize.h"
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
+#include "angle_gl.h"
 
-void InsertBuiltInFunctions(ShShaderType type, ShShaderSpec spec, const ShBuiltInResources &resources, TSymbolTable &symbolTable)
+void InsertBuiltInFunctions(sh::GLenum type, ShShaderSpec spec, const ShBuiltInResources &resources, TSymbolTable &symbolTable)
 {
-    TType *float1 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 1);
-    TType *float2 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 2);
-    TType *float3 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 3);
-    TType *float4 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 4);
+    TType *float1 = new TType(EbtFloat);
+    TType *float2 = new TType(EbtFloat, 2);
+    TType *float3 = new TType(EbtFloat, 3);
+    TType *float4 = new TType(EbtFloat, 4);
 
-    TType *int2 = new TType(EbtInt, EbpUndefined, EvqGlobal, 2);
-    TType *int3 = new TType(EbtInt, EbpUndefined, EvqGlobal, 3);
-    TType *int4 = new TType(EbtInt, EbpUndefined, EvqGlobal, 4);
+    TType *int1 = new TType(EbtInt);
+    TType *int2 = new TType(EbtInt, 2);
+    TType *int3 = new TType(EbtInt, 3);
+    TType *int4 = new TType(EbtInt, 4);
 
     //
     // Angle and Trigonometric Functions.
     //
-    symbolTable.insertBuiltIn(float1, "radians", float1);
-    symbolTable.insertBuiltIn(float2, "radians", float2);
-    symbolTable.insertBuiltIn(float3, "radians", float3);
-    symbolTable.insertBuiltIn(float4, "radians", float4);
-
-    symbolTable.insertBuiltIn(float1, "degrees", float1);
-    symbolTable.insertBuiltIn(float2, "degrees", float2);
-    symbolTable.insertBuiltIn(float3, "degrees", float3);
-    symbolTable.insertBuiltIn(float4, "degrees", float4);
-
-    symbolTable.insertBuiltIn(float1, "sin", float1);
-    symbolTable.insertBuiltIn(float2, "sin", float2);
-    symbolTable.insertBuiltIn(float3, "sin", float3);
-    symbolTable.insertBuiltIn(float4, "sin", float4);
-
-    symbolTable.insertBuiltIn(float1, "cos", float1);
-    symbolTable.insertBuiltIn(float2, "cos", float2);
-    symbolTable.insertBuiltIn(float3, "cos", float3);
-    symbolTable.insertBuiltIn(float4, "cos", float4);
-
-    symbolTable.insertBuiltIn(float1, "tan", float1);
-    symbolTable.insertBuiltIn(float2, "tan", float2);
-    symbolTable.insertBuiltIn(float3, "tan", float3);
-    symbolTable.insertBuiltIn(float4, "tan", float4);
-
-    symbolTable.insertBuiltIn(float1, "asin", float1);
-    symbolTable.insertBuiltIn(float2, "asin", float2);
-    symbolTable.insertBuiltIn(float3, "asin", float3);
-    symbolTable.insertBuiltIn(float4, "asin", float4);
-
-    symbolTable.insertBuiltIn(float1, "acos", float1);
-    symbolTable.insertBuiltIn(float2, "acos", float2);
-    symbolTable.insertBuiltIn(float3, "acos", float3);
-    symbolTable.insertBuiltIn(float4, "acos", float4);
-
-    symbolTable.insertBuiltIn(float1, "atan", float1, float1);
-    symbolTable.insertBuiltIn(float2, "atan", float2, float2);
-    symbolTable.insertBuiltIn(float3, "atan", float3, float3);
-    symbolTable.insertBuiltIn(float4, "atan", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "atan", float1);
-    symbolTable.insertBuiltIn(float2, "atan", float2);
-    symbolTable.insertBuiltIn(float3, "atan", float3);
-    symbolTable.insertBuiltIn(float4, "atan", float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "radians", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "radians", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "radians", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "radians", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "degrees", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "degrees", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "degrees", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "degrees", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "sin", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "sin", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "sin", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "sin", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "cos", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "cos", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "cos", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "cos", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "tan", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "tan", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "tan", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "tan", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "asin", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "asin", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "asin", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "asin", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "acos", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "acos", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "acos", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "acos", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "atan", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "atan", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "atan", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "atan", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "atan", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "atan", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "atan", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "atan", float4);
 
     //
     // Exponential Functions.
     //
-    symbolTable.insertBuiltIn(float1, "pow", float1, float1);
-    symbolTable.insertBuiltIn(float2, "pow", float2, float2);
-    symbolTable.insertBuiltIn(float3, "pow", float3, float3);
-    symbolTable.insertBuiltIn(float4, "pow", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "exp", float1);
-    symbolTable.insertBuiltIn(float2, "exp", float2);
-    symbolTable.insertBuiltIn(float3, "exp", float3);
-    symbolTable.insertBuiltIn(float4, "exp", float4);
-
-    symbolTable.insertBuiltIn(float1, "log", float1);
-    symbolTable.insertBuiltIn(float2, "log", float2);
-    symbolTable.insertBuiltIn(float3, "log", float3);
-    symbolTable.insertBuiltIn(float4, "log", float4);
-
-    symbolTable.insertBuiltIn(float1, "exp2", float1);
-    symbolTable.insertBuiltIn(float2, "exp2", float2);
-    symbolTable.insertBuiltIn(float3, "exp2", float3);
-    symbolTable.insertBuiltIn(float4, "exp2", float4);
-
-    symbolTable.insertBuiltIn(float1, "log2", float1);
-    symbolTable.insertBuiltIn(float2, "log2", float2);
-    symbolTable.insertBuiltIn(float3, "log2", float3);
-    symbolTable.insertBuiltIn(float4, "log2", float4);
-
-    symbolTable.insertBuiltIn(float1, "sqrt", float1);
-    symbolTable.insertBuiltIn(float2, "sqrt", float2);
-    symbolTable.insertBuiltIn(float3, "sqrt", float3);
-    symbolTable.insertBuiltIn(float4, "sqrt", float4);
-
-    symbolTable.insertBuiltIn(float1, "inversesqrt", float1);
-    symbolTable.insertBuiltIn(float2, "inversesqrt", float2);
-    symbolTable.insertBuiltIn(float3, "inversesqrt", float3);
-    symbolTable.insertBuiltIn(float4, "inversesqrt", float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "pow", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "pow", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "pow", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "pow", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "exp", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "exp", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "exp", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "exp", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "log", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "log", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "log", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "log", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "exp2", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "exp2", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "exp2", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "exp2", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "log2", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "log2", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "log2", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "log2", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "sqrt", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "sqrt", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "sqrt", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "sqrt", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "inversesqrt", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "inversesqrt", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "inversesqrt", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "inversesqrt", float4);
 
     //
     // Common Functions.
     //
-    symbolTable.insertBuiltIn(float1, "abs", float1);
-    symbolTable.insertBuiltIn(float2, "abs", float2);
-    symbolTable.insertBuiltIn(float3, "abs", float3);
-    symbolTable.insertBuiltIn(float4, "abs", float4);
-
-    symbolTable.insertBuiltIn(float1, "sign", float1);
-    symbolTable.insertBuiltIn(float2, "sign", float2);
-    symbolTable.insertBuiltIn(float3, "sign", float3);
-    symbolTable.insertBuiltIn(float4, "sign", float4);
-
-    symbolTable.insertBuiltIn(float1, "floor", float1);
-    symbolTable.insertBuiltIn(float2, "floor", float2);
-    symbolTable.insertBuiltIn(float3, "floor", float3);
-    symbolTable.insertBuiltIn(float4, "floor", float4);
-
-    symbolTable.insertBuiltIn(float1, "ceil", float1);
-    symbolTable.insertBuiltIn(float2, "ceil", float2);
-    symbolTable.insertBuiltIn(float3, "ceil", float3);
-    symbolTable.insertBuiltIn(float4, "ceil", float4);
-
-    symbolTable.insertBuiltIn(float1, "fract", float1);
-    symbolTable.insertBuiltIn(float2, "fract", float2);
-    symbolTable.insertBuiltIn(float3, "fract", float3);
-    symbolTable.insertBuiltIn(float4, "fract", float4);
-
-    symbolTable.insertBuiltIn(float1, "mod", float1, float1);
-    symbolTable.insertBuiltIn(float2, "mod", float2, float1);
-    symbolTable.insertBuiltIn(float3, "mod", float3, float1);
-    symbolTable.insertBuiltIn(float4, "mod", float4, float1);
-    symbolTable.insertBuiltIn(float2, "mod", float2, float2);
-    symbolTable.insertBuiltIn(float3, "mod", float3, float3);
-    symbolTable.insertBuiltIn(float4, "mod", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "min", float1, float1);
-    symbolTable.insertBuiltIn(float2, "min", float2, float1);
-    symbolTable.insertBuiltIn(float3, "min", float3, float1);
-    symbolTable.insertBuiltIn(float4, "min", float4, float1);
-    symbolTable.insertBuiltIn(float2, "min", float2, float2);
-    symbolTable.insertBuiltIn(float3, "min", float3, float3);
-    symbolTable.insertBuiltIn(float4, "min", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "max", float1, float1);
-    symbolTable.insertBuiltIn(float2, "max", float2, float1);
-    symbolTable.insertBuiltIn(float3, "max", float3, float1);
-    symbolTable.insertBuiltIn(float4, "max", float4, float1);
-    symbolTable.insertBuiltIn(float2, "max", float2, float2);
-    symbolTable.insertBuiltIn(float3, "max", float3, float3);
-    symbolTable.insertBuiltIn(float4, "max", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "clamp", float1, float1, float1);
-    symbolTable.insertBuiltIn(float2, "clamp", float2, float1, float1);
-    symbolTable.insertBuiltIn(float3, "clamp", float3, float1, float1);
-    symbolTable.insertBuiltIn(float4, "clamp", float4, float1, float1);
-    symbolTable.insertBuiltIn(float2, "clamp", float2, float2, float2);
-    symbolTable.insertBuiltIn(float3, "clamp", float3, float3, float3);
-    symbolTable.insertBuiltIn(float4, "clamp", float4, float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "mix", float1, float1, float1);
-    symbolTable.insertBuiltIn(float2, "mix", float2, float2, float1);
-    symbolTable.insertBuiltIn(float3, "mix", float3, float3, float1);
-    symbolTable.insertBuiltIn(float4, "mix", float4, float4, float1);
-    symbolTable.insertBuiltIn(float2, "mix", float2, float2, float2);
-    symbolTable.insertBuiltIn(float3, "mix", float3, float3, float3);
-    symbolTable.insertBuiltIn(float4, "mix", float4, float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "step", float1, float1);
-    symbolTable.insertBuiltIn(float2, "step", float2, float2);
-    symbolTable.insertBuiltIn(float3, "step", float3, float3);
-    symbolTable.insertBuiltIn(float4, "step", float4, float4);
-    symbolTable.insertBuiltIn(float2, "step", float1, float2);
-    symbolTable.insertBuiltIn(float3, "step", float1, float3);
-    symbolTable.insertBuiltIn(float4, "step", float1, float4);
-
-    symbolTable.insertBuiltIn(float1, "smoothstep", float1, float1, float1);
-    symbolTable.insertBuiltIn(float2, "smoothstep", float2, float2, float2);
-    symbolTable.insertBuiltIn(float3, "smoothstep", float3, float3, float3);
-    symbolTable.insertBuiltIn(float4, "smoothstep", float4, float4, float4);
-    symbolTable.insertBuiltIn(float2, "smoothstep", float1, float1, float2);
-    symbolTable.insertBuiltIn(float3, "smoothstep", float1, float1, float3);
-    symbolTable.insertBuiltIn(float4, "smoothstep", float1, float1, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "abs", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "abs", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "abs", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "abs", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "sign", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "sign", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "sign", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "sign", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "floor", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "floor", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "floor", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "floor", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "ceil", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "ceil", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "ceil", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "ceil", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "fract", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "fract", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "fract", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "fract", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "mod", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "mod", float2, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "mod", float3, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "mod", float4, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "mod", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "mod", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "mod", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "min", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "min", float2, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "min", float3, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "min", float4, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "min", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "min", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "min", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "max", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "max", float2, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "max", float3, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "max", float4, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "max", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "max", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "max", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "clamp", float1, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "clamp", float2, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "clamp", float3, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "clamp", float4, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "clamp", float2, float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "clamp", float3, float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "clamp", float4, float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "mix", float1, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "mix", float2, float2, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "mix", float3, float3, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "mix", float4, float4, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "mix", float2, float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "mix", float3, float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "mix", float4, float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "step", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "step", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "step", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "step", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "step", float1, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "step", float1, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "step", float1, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "smoothstep", float1, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "smoothstep", float2, float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "smoothstep", float3, float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "smoothstep", float4, float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "smoothstep", float1, float1, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "smoothstep", float1, float1, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "smoothstep", float1, float1, float4);
 
     //
     // Geometric Functions.
     //
-    symbolTable.insertBuiltIn(float1, "length", float1);
-    symbolTable.insertBuiltIn(float1, "length", float2);
-    symbolTable.insertBuiltIn(float1, "length", float3);
-    symbolTable.insertBuiltIn(float1, "length", float4);
-
-    symbolTable.insertBuiltIn(float1, "distance", float1, float1);
-    symbolTable.insertBuiltIn(float1, "distance", float2, float2);
-    symbolTable.insertBuiltIn(float1, "distance", float3, float3);
-    symbolTable.insertBuiltIn(float1, "distance", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "dot", float1, float1);
-    symbolTable.insertBuiltIn(float1, "dot", float2, float2);
-    symbolTable.insertBuiltIn(float1, "dot", float3, float3);
-    symbolTable.insertBuiltIn(float1, "dot", float4, float4);
-
-    symbolTable.insertBuiltIn(float3, "cross", float3, float3);
-    symbolTable.insertBuiltIn(float1, "normalize", float1);
-    symbolTable.insertBuiltIn(float2, "normalize", float2);
-    symbolTable.insertBuiltIn(float3, "normalize", float3);
-    symbolTable.insertBuiltIn(float4, "normalize", float4);
-
-    symbolTable.insertBuiltIn(float1, "faceforward", float1, float1, float1);
-    symbolTable.insertBuiltIn(float2, "faceforward", float2, float2, float2);
-    symbolTable.insertBuiltIn(float3, "faceforward", float3, float3, float3);
-    symbolTable.insertBuiltIn(float4, "faceforward", float4, float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "reflect", float1, float1);
-    symbolTable.insertBuiltIn(float2, "reflect", float2, float2);
-    symbolTable.insertBuiltIn(float3, "reflect", float3, float3);
-    symbolTable.insertBuiltIn(float4, "reflect", float4, float4);
-
-    symbolTable.insertBuiltIn(float1, "refract", float1, float1, float1);
-    symbolTable.insertBuiltIn(float2, "refract", float2, float2, float1);
-    symbolTable.insertBuiltIn(float3, "refract", float3, float3, float1);
-    symbolTable.insertBuiltIn(float4, "refract", float4, float4, float1);
-
-    TType *mat2 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 2, true);
-    TType *mat3 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 3, true);
-    TType *mat4 = new TType(EbtFloat, EbpUndefined, EvqGlobal, 4, true);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "length", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "length", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "length", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "length", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "distance", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "distance", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "distance", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "distance", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "dot", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "dot", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "dot", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "dot", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "cross", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "normalize", float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "normalize", float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "normalize", float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "normalize", float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "faceforward", float1, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "faceforward", float2, float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "faceforward", float3, float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "faceforward", float4, float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "reflect", float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "reflect", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "reflect", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "reflect", float4, float4);
+
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float1, "refract", float1, float1, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float2, "refract", float2, float2, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float3, "refract", float3, float3, float1);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, float4, "refract", float4, float4, float1);
+
+    TType *mat2 = new TType(EbtFloat, 2, 2);
+    TType *mat3 = new TType(EbtFloat, 3, 3);
+    TType *mat4 = new TType(EbtFloat, 4, 4);
 
     //
     // Matrix Functions.
     //
-    symbolTable.insertBuiltIn(mat2, "matrixCompMult", mat2, mat2);
-    symbolTable.insertBuiltIn(mat3, "matrixCompMult", mat3, mat3);
-    symbolTable.insertBuiltIn(mat4, "matrixCompMult", mat4, mat4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, mat2, "matrixCompMult", mat2, mat2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, mat3, "matrixCompMult", mat3, mat3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, mat4, "matrixCompMult", mat4, mat4);
 
-    TType *bool1 = new TType(EbtBool, EbpUndefined, EvqGlobal, 1);
-    TType *bool2 = new TType(EbtBool, EbpUndefined, EvqGlobal, 2);
-    TType *bool3 = new TType(EbtBool, EbpUndefined, EvqGlobal, 3);
-    TType *bool4 = new TType(EbtBool, EbpUndefined, EvqGlobal, 4);
+    TType *bool1 = new TType(EbtBool);
+    TType *bool2 = new TType(EbtBool, 2);
+    TType *bool3 = new TType(EbtBool, 3);
+    TType *bool4 = new TType(EbtBool, 4);
 
     //
     // Vector relational functions.
     //
-    symbolTable.insertBuiltIn(bool2, "lessThan", float2, float2);
-    symbolTable.insertBuiltIn(bool3, "lessThan", float3, float3);
-    symbolTable.insertBuiltIn(bool4, "lessThan", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "lessThan", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "lessThan", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "lessThan", float4, float4);
 
-    symbolTable.insertBuiltIn(bool2, "lessThan", int2, int2);
-    symbolTable.insertBuiltIn(bool3, "lessThan", int3, int3);
-    symbolTable.insertBuiltIn(bool4, "lessThan", int4, int4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "lessThan", int2, int2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "lessThan", int3, int3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "lessThan", int4, int4);
 
-    symbolTable.insertBuiltIn(bool2, "lessThanEqual", float2, float2);
-    symbolTable.insertBuiltIn(bool3, "lessThanEqual", float3, float3);
-    symbolTable.insertBuiltIn(bool4, "lessThanEqual", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "lessThanEqual", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "lessThanEqual", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "lessThanEqual", float4, float4);
 
-    symbolTable.insertBuiltIn(bool2, "lessThanEqual", int2, int2);
-    symbolTable.insertBuiltIn(bool3, "lessThanEqual", int3, int3);
-    symbolTable.insertBuiltIn(bool4, "lessThanEqual", int4, int4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "lessThanEqual", int2, int2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "lessThanEqual", int3, int3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "lessThanEqual", int4, int4);
 
-    symbolTable.insertBuiltIn(bool2, "greaterThan", float2, float2);
-    symbolTable.insertBuiltIn(bool3, "greaterThan", float3, float3);
-    symbolTable.insertBuiltIn(bool4, "greaterThan", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "greaterThan", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "greaterThan", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "greaterThan", float4, float4);
 
-    symbolTable.insertBuiltIn(bool2, "greaterThan", int2, int2);
-    symbolTable.insertBuiltIn(bool3, "greaterThan", int3, int3);
-    symbolTable.insertBuiltIn(bool4, "greaterThan", int4, int4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "greaterThan", int2, int2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "greaterThan", int3, int3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "greaterThan", int4, int4);
 
-    symbolTable.insertBuiltIn(bool2, "greaterThanEqual", float2, float2);
-    symbolTable.insertBuiltIn(bool3, "greaterThanEqual", float3, float3);
-    symbolTable.insertBuiltIn(bool4, "greaterThanEqual", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "greaterThanEqual", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "greaterThanEqual", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "greaterThanEqual", float4, float4);
 
-    symbolTable.insertBuiltIn(bool2, "greaterThanEqual", int2, int2);
-    symbolTable.insertBuiltIn(bool3, "greaterThanEqual", int3, int3);
-    symbolTable.insertBuiltIn(bool4, "greaterThanEqual", int4, int4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "greaterThanEqual", int2, int2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "greaterThanEqual", int3, int3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "greaterThanEqual", int4, int4);
 
-    symbolTable.insertBuiltIn(bool2, "equal", float2, float2);
-    symbolTable.insertBuiltIn(bool3, "equal", float3, float3);
-    symbolTable.insertBuiltIn(bool4, "equal", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "equal", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "equal", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "equal", float4, float4);
 
-    symbolTable.insertBuiltIn(bool2, "equal", int2, int2);
-    symbolTable.insertBuiltIn(bool3, "equal", int3, int3);
-    symbolTable.insertBuiltIn(bool4, "equal", int4, int4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "equal", int2, int2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "equal", int3, int3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "equal", int4, int4);
 
-    symbolTable.insertBuiltIn(bool2, "equal", bool2, bool2);
-    symbolTable.insertBuiltIn(bool3, "equal", bool3, bool3);
-    symbolTable.insertBuiltIn(bool4, "equal", bool4, bool4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "equal", bool2, bool2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "equal", bool3, bool3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "equal", bool4, bool4);
 
-    symbolTable.insertBuiltIn(bool2, "notEqual", float2, float2);
-    symbolTable.insertBuiltIn(bool3, "notEqual", float3, float3);
-    symbolTable.insertBuiltIn(bool4, "notEqual", float4, float4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "notEqual", float2, float2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "notEqual", float3, float3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "notEqual", float4, float4);
 
-    symbolTable.insertBuiltIn(bool2, "notEqual", int2, int2);
-    symbolTable.insertBuiltIn(bool3, "notEqual", int3, int3);
-    symbolTable.insertBuiltIn(bool4, "notEqual", int4, int4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "notEqual", int2, int2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "notEqual", int3, int3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "notEqual", int4, int4);
 
-    symbolTable.insertBuiltIn(bool2, "notEqual", bool2, bool2);
-    symbolTable.insertBuiltIn(bool3, "notEqual", bool3, bool3);
-    symbolTable.insertBuiltIn(bool4, "notEqual", bool4, bool4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "notEqual", bool2, bool2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "notEqual", bool3, bool3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "notEqual", bool4, bool4);
 
-    symbolTable.insertBuiltIn(bool1, "any", bool2);
-    symbolTable.insertBuiltIn(bool1, "any", bool3);
-    symbolTable.insertBuiltIn(bool1, "any", bool4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool1, "any", bool2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool1, "any", bool3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool1, "any", bool4);
 
-    symbolTable.insertBuiltIn(bool1, "all", bool2);
-    symbolTable.insertBuiltIn(bool1, "all", bool3);
-    symbolTable.insertBuiltIn(bool1, "all", bool4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool1, "all", bool2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool1, "all", bool3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool1, "all", bool4);
 
-    symbolTable.insertBuiltIn(bool2, "not", bool2);
-    symbolTable.insertBuiltIn(bool3, "not", bool3);
-    symbolTable.insertBuiltIn(bool4, "not", bool4);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool2, "not", bool2);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool3, "not", bool3);
+    symbolTable.insertBuiltIn(COMMON_BUILTINS, bool4, "not", bool4);
 
-    TType *sampler2D = new TType(EbtSampler2D, EbpUndefined, EvqGlobal, 1);
-    TType *samplerCube = new TType(EbtSamplerCube, EbpUndefined, EvqGlobal, 1);
+    TType *sampler2D = new TType(EbtSampler2D);
+    TType *samplerCube = new TType(EbtSamplerCube);
 
     //
     // Texture Functions for GLSL ES 1.0
     //
-    symbolTable.insertBuiltIn(float4, "texture2D", sampler2D, float2);
-    symbolTable.insertBuiltIn(float4, "texture2DProj", sampler2D, float3);
-    symbolTable.insertBuiltIn(float4, "texture2DProj", sampler2D, float4);
-    symbolTable.insertBuiltIn(float4, "textureCube", samplerCube, float3);
+    symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2D", sampler2D, float2);
+    symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProj", sampler2D, float3);
+    symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProj", sampler2D, float4);
+    symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "textureCube", samplerCube, float3);
 
     if (resources.OES_EGL_image_external)
     {
-        TType *samplerExternalOES = new TType(EbtSamplerExternalOES, EbpUndefined, EvqGlobal, 1);
+        TType *samplerExternalOES = new TType(EbtSamplerExternalOES);
 
-        symbolTable.insertBuiltIn(float4, "texture2D", samplerExternalOES, float2);
-        symbolTable.insertBuiltIn(float4, "texture2DProj", samplerExternalOES, float3);
-        symbolTable.insertBuiltIn(float4, "texture2DProj", samplerExternalOES, float4);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2D", samplerExternalOES, float2);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProj", samplerExternalOES, float3);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProj", samplerExternalOES, float4);
     }
 
     if (resources.ARB_texture_rectangle)
     {
-        TType *sampler2DRect = new TType(EbtSampler2DRect, EbpUndefined, EvqGlobal, 1);
+        TType *sampler2DRect = new TType(EbtSampler2DRect);
 
-        symbolTable.insertBuiltIn(float4, "texture2DRect", sampler2DRect, float2);
-        symbolTable.insertBuiltIn(float4, "texture2DRectProj", sampler2DRect, float3);
-        symbolTable.insertBuiltIn(float4, "texture2DRectProj", sampler2DRect, float4);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DRect", sampler2DRect, float2);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DRectProj", sampler2DRect, float3);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DRectProj", sampler2DRect, float4);
     }
 
-    if (type == SH_FRAGMENT_SHADER)
+    if (resources.EXT_shader_texture_lod)
     {
-        symbolTable.insertBuiltIn(float4, "texture2D", sampler2D, float2, float1);
-        symbolTable.insertBuiltIn(float4, "texture2DProj", sampler2D, float3, float1);
-        symbolTable.insertBuiltIn(float4, "texture2DProj", sampler2D, float4, float1);
-        symbolTable.insertBuiltIn(float4, "textureCube", samplerCube, float3, float1);
+        /* The *Grad* variants are new to both vertex and fragment shaders; the fragment
+         * shader specific pieces are added separately below.
+         */
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DGradEXT", sampler2D, float2, float2, float2);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProjGradEXT", sampler2D, float3, float2, float2);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProjGradEXT", sampler2D, float4, float2, float2);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "textureCubeGradEXT", samplerCube, float3, float3, float3);
+    }
+
+    if (type == GL_FRAGMENT_SHADER)
+    {
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2D", sampler2D, float2, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProj", sampler2D, float3, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProj", sampler2D, float4, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "textureCube", samplerCube, float3, float1);
 
         if (resources.OES_standard_derivatives)
         {
-            symbolTable.insertBuiltIn(float1, "dFdx", float1);
-            symbolTable.insertBuiltIn(float2, "dFdx", float2);
-            symbolTable.insertBuiltIn(float3, "dFdx", float3);
-            symbolTable.insertBuiltIn(float4, "dFdx", float4);
-            
-            symbolTable.insertBuiltIn(float1, "dFdy", float1);
-            symbolTable.insertBuiltIn(float2, "dFdy", float2);
-            symbolTable.insertBuiltIn(float3, "dFdy", float3);
-            symbolTable.insertBuiltIn(float4, "dFdy", float4);
-
-            symbolTable.insertBuiltIn(float1, "fwidth", float1);
-            symbolTable.insertBuiltIn(float2, "fwidth", float2);
-            symbolTable.insertBuiltIn(float3, "fwidth", float3);
-            symbolTable.insertBuiltIn(float4, "fwidth", float4);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float1, "dFdx", float1);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float2, "dFdx", float2);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float3, "dFdx", float3);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "dFdx", float4);
+
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float1, "dFdy", float1);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float2, "dFdy", float2);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float3, "dFdy", float3);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "dFdy", float4);
+
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float1, "fwidth", float1);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float2, "fwidth", float2);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float3, "fwidth", float3);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "fwidth", float4);
+        }
+
+        if (resources.EXT_shader_texture_lod)
+        {
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DLodEXT", sampler2D, float2, float1);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProjLodEXT", sampler2D, float3, float1);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProjLodEXT", sampler2D, float4, float1);
+            symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "textureCubeLodEXT", samplerCube, float3, float1);
         }
     }
 
-    if(type == SH_VERTEX_SHADER)
+    if(type == GL_VERTEX_SHADER)
     {
-        symbolTable.insertBuiltIn(float4, "texture2DLod", sampler2D, float2, float1);
-        symbolTable.insertBuiltIn(float4, "texture2DProjLod", sampler2D, float3, float1);
-        symbolTable.insertBuiltIn(float4, "texture2DProjLod", sampler2D, float4, float1);
-        symbolTable.insertBuiltIn(float4, "textureCubeLod", samplerCube, float3, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DLod", sampler2D, float2, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProjLod", sampler2D, float3, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "texture2DProjLod", sampler2D, float4, float1);
+        symbolTable.insertBuiltIn(ESSL1_BUILTINS, float4, "textureCubeLod", samplerCube, float3, float1);
     }
 
+    TType *gvec4 = new TType(EbtGVec4);
+
+    TType *gsampler2D = new TType(EbtGSampler2D);
+    TType *gsamplerCube = new TType(EbtGSamplerCube);
+    TType *gsampler3D = new TType(EbtGSampler3D);
+    TType *gsampler2DArray = new TType(EbtGSampler2DArray);
+
+    //
+    // Texture Functions for GLSL ES 3.0
+    //
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsampler2D, float2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsampler3D, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsamplerCube, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsampler2DArray, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProj", gsampler2D, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProj", gsampler2D, float4);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProj", gsampler3D, float4);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLod", gsampler2D, float2, float1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLod", gsampler3D, float3, float1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLod", gsamplerCube, float3, float1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLod", gsampler2DArray, float3, float1);
+
+    if (type == GL_FRAGMENT_SHADER)
+    {
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsampler2D, float2, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsampler3D, float3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsamplerCube, float3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texture", gsampler2DArray, float3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProj", gsampler2D, float3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProj", gsampler2D, float4, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProj", gsampler3D, float4, float1);
+    }
+
+    TType *sampler2DShadow = new TType(EbtSampler2DShadow);
+    TType *samplerCubeShadow = new TType(EbtSamplerCubeShadow);
+    TType *sampler2DArrayShadow = new TType(EbtSampler2DArrayShadow);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "texture", sampler2DShadow, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "texture", samplerCubeShadow, float4);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "texture", sampler2DArrayShadow, float4);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProj", sampler2DShadow, float4);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureLod", sampler2DShadow, float3, float1);
+
+    if (type == GL_FRAGMENT_SHADER)
+    {
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "texture", sampler2DShadow, float3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "texture", samplerCubeShadow, float4, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProj", sampler2DShadow, float4, float1);
+    }
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int2, "textureSize", gsampler2D, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int3, "textureSize", gsampler3D, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int2, "textureSize", gsamplerCube, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int3, "textureSize", gsampler2DArray, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int2, "textureSize", sampler2DShadow, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int2, "textureSize", samplerCubeShadow, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, int3, "textureSize", sampler2DArrayShadow, int1);
+
+    if(type == GL_FRAGMENT_SHADER)
+    {
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "dFdx", float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float2, "dFdx", float2);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float3, "dFdx", float3);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float4, "dFdx", float4);
+            
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "dFdy", float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float2, "dFdy", float2);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float3, "dFdy", float3);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float4, "dFdy", float4);
+
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "fwidth", float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float2, "fwidth", float2);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float3, "fwidth", float3);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float4, "fwidth", float4);
+    }
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureOffset", gsampler2D, float2, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureOffset", gsampler3D, float3, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureOffset", sampler2DShadow, float3, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureOffset", gsampler2DArray, float3, int2);
+
+    if(type == GL_FRAGMENT_SHADER)
+    {
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureOffset", gsampler2D, float2, int2, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureOffset", gsampler3D, float3, int3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureOffset", sampler2DShadow, float3, int2, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureOffset", gsampler2DArray, float3, int2, float1);
+    }
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjOffset", gsampler2D, float3, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjOffset", gsampler2D, float4, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjOffset", gsampler3D, float4, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProjOffset", sampler2DShadow, float4, int2);
+
+    if(type == GL_FRAGMENT_SHADER)
+    {
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjOffset", gsampler2D, float3, int2, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjOffset", gsampler2D, float4, int2, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjOffset", gsampler3D, float4, int3, float1);
+        symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProjOffset", sampler2DShadow, float4, int2, float1);
+    }
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLodOffset", gsampler2D, float2, float1, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLodOffset", gsampler3D, float3, float1, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureLodOffset", sampler2DShadow, float3, float1, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureLodOffset", gsampler2DArray, float3, float1, int2);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjLod", gsampler2D, float3, float1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjLod", gsampler2D, float4, float1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjLod", gsampler3D, float4, float1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProjLod", sampler2DShadow, float4, float1);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjLodOffset", gsampler2D, float3, float1, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjLodOffset", gsampler2D, float4, float1, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjLodOffset", gsampler3D, float4, float1, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProjLodOffset", sampler2DShadow, float4, float1, int2);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texelFetch", gsampler2D, int2, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texelFetch", gsampler3D, int3, int1);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texelFetch", gsampler2DArray, int3, int1);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texelFetchOffset", gsampler2D, int2, int1, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texelFetchOffset", gsampler3D, int3, int1, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "texelFetchOffset", gsampler2DArray, int3, int1, int2);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGrad", gsampler2D, float2, float2, float2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGrad", gsampler3D, float3, float3, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGrad", gsamplerCube, float3, float3, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureGrad", sampler2DShadow, float3, float2, float2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureGrad", samplerCubeShadow, float4, float3, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGrad", gsampler2DArray, float3, float2, float2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureGrad", sampler2DArrayShadow, float4, float2, float2);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGradOffset", gsampler2D, float2, float2, float2, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGradOffset", gsampler3D, float3, float3, float3, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureGradOffset", sampler2DShadow, float3, float2, float2, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureGradOffset", gsampler2DArray, float3, float2, float2, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureGradOffset", sampler2DArrayShadow, float4, float2, float2, int2);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjGrad", gsampler2D, float3, float2, float2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjGrad", gsampler2D, float4, float2, float2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjGrad", gsampler3D, float4, float3, float3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProjGrad", sampler2DShadow, float4, float2, float2);
+
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjGradOffset", gsampler2D, float3, float2, float2, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjGradOffset", gsampler2D, float4, float2, float2, int2);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, gvec4, "textureProjGradOffset", gsampler3D, float4, float3, float3, int3);
+    symbolTable.insertBuiltIn(ESSL3_BUILTINS, float1, "textureProjGradOffset", sampler2DShadow, float4, float2, float2, int2);
+
     //
     // Depth range in window coordinates
     //
     TFieldList *fields = NewPoolTFieldList();
-    TField *near = new TField(new TType(EbtFloat, EbpHigh, EvqGlobal, 1), NewPoolTString("near"));
-    TField *far = new TField(new TType(EbtFloat, EbpHigh, EvqGlobal, 1), NewPoolTString("far"));
-    TField *diff = new TField(new TType(EbtFloat, EbpHigh, EvqGlobal, 1), NewPoolTString("diff"));
+    TSourceLoc zeroSourceLoc = {0, 0, 0, 0};
+    TField *near = new TField(new TType(EbtFloat, EbpHigh, EvqGlobal, 1), NewPoolTString("near"), zeroSourceLoc);
+    TField *far = new TField(new TType(EbtFloat, EbpHigh, EvqGlobal, 1), NewPoolTString("far"), zeroSourceLoc);
+    TField *diff = new TField(new TType(EbtFloat, EbpHigh, EvqGlobal, 1), NewPoolTString("diff"), zeroSourceLoc);
     fields->push_back(near);
     fields->push_back(far);
     fields->push_back(diff);
     TStructure *depthRangeStruct = new TStructure(NewPoolTString("gl_DepthRangeParameters"), fields);
     TVariable *depthRangeParameters = new TVariable(&depthRangeStruct->name(), depthRangeStruct, true);
-    symbolTable.insert(*depthRangeParameters);
+    symbolTable.insert(COMMON_BUILTINS, depthRangeParameters);
     TVariable *depthRange = new TVariable(NewPoolTString("gl_DepthRange"), TType(depthRangeStruct));
     depthRange->setQualifier(EvqUniform);
-    symbolTable.insert(*depthRange);
+    symbolTable.insert(COMMON_BUILTINS, depthRange);
 
     //
     // Implementation dependent built-in constants.
     //
-    symbolTable.insertConstInt("gl_MaxVertexAttribs", resources.MaxVertexAttribs);
-    symbolTable.insertConstInt("gl_MaxVertexUniformVectors", resources.MaxVertexUniformVectors);
-    symbolTable.insertConstInt("gl_MaxVaryingVectors", resources.MaxVaryingVectors);
-    symbolTable.insertConstInt("gl_MaxVertexTextureImageUnits", resources.MaxVertexTextureImageUnits);
-    symbolTable.insertConstInt("gl_MaxCombinedTextureImageUnits", resources.MaxCombinedTextureImageUnits);
-    symbolTable.insertConstInt("gl_MaxTextureImageUnits", resources.MaxTextureImageUnits);
-    symbolTable.insertConstInt("gl_MaxFragmentUniformVectors", resources.MaxFragmentUniformVectors);
+    symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxVertexAttribs", resources.MaxVertexAttribs);
+    symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxVertexUniformVectors", resources.MaxVertexUniformVectors);
+    symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxVertexTextureImageUnits", resources.MaxVertexTextureImageUnits);
+    symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxCombinedTextureImageUnits", resources.MaxCombinedTextureImageUnits);
+    symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxTextureImageUnits", resources.MaxTextureImageUnits);
+    symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxFragmentUniformVectors", resources.MaxFragmentUniformVectors);
+
+    symbolTable.insertConstInt(ESSL1_BUILTINS, "gl_MaxVaryingVectors", resources.MaxVaryingVectors);
 
     if (spec != SH_CSS_SHADERS_SPEC)
     {
-        symbolTable.insertConstInt("gl_MaxDrawBuffers", resources.MaxDrawBuffers);
+        symbolTable.insertConstInt(COMMON_BUILTINS, "gl_MaxDrawBuffers", resources.MaxDrawBuffers);
     }
+
+    symbolTable.insertConstInt(ESSL3_BUILTINS, "gl_MaxVertexOutputVectors", resources.MaxVertexOutputVectors);
+    symbolTable.insertConstInt(ESSL3_BUILTINS, "gl_MaxFragmentInputVectors", resources.MaxFragmentInputVectors);
+    symbolTable.insertConstInt(ESSL3_BUILTINS, "gl_MinProgramTexelOffset", resources.MinProgramTexelOffset);
+    symbolTable.insertConstInt(ESSL3_BUILTINS, "gl_MaxProgramTexelOffset", resources.MaxProgramTexelOffset);
 }
 
-void IdentifyBuiltIns(ShShaderType type, ShShaderSpec spec,
+void IdentifyBuiltIns(sh::GLenum type, ShShaderSpec spec,
                       const ShBuiltInResources &resources,
                       TSymbolTable &symbolTable)
 {
@@ -427,32 +604,32 @@ void IdentifyBuiltIns(ShShaderType type, ShShaderSpec spec,
     // the built-in header files.
     //
     switch(type) {
-    case SH_FRAGMENT_SHADER:
-        symbolTable.insert(*new TVariable(NewPoolTString("gl_FragCoord"),                       TType(EbtFloat, EbpMedium, EvqFragCoord,   4)));
-        symbolTable.insert(*new TVariable(NewPoolTString("gl_FrontFacing"),                     TType(EbtBool,  EbpUndefined, EvqFrontFacing, 1)));
-        symbolTable.insert(*new TVariable(NewPoolTString("gl_PointCoord"),                      TType(EbtFloat, EbpMedium, EvqPointCoord,  2)));
+    case GL_FRAGMENT_SHADER:
+        symbolTable.insert(COMMON_BUILTINS, new TVariable(NewPoolTString("gl_FragCoord"), TType(EbtFloat, EbpMedium, EvqFragCoord,   4)));
+        symbolTable.insert(COMMON_BUILTINS, new TVariable(NewPoolTString("gl_FrontFacing"), TType(EbtBool,  EbpUndefined, EvqFrontFacing, 1)));
+        symbolTable.insert(COMMON_BUILTINS, new TVariable(NewPoolTString("gl_PointCoord"), TType(EbtFloat, EbpMedium, EvqPointCoord,  2)));
 
         //
         // In CSS Shaders, gl_FragColor, gl_FragData, and gl_MaxDrawBuffers are not available.
         // Instead, css_MixColor and css_ColorMatrix are available.
         //
         if (spec != SH_CSS_SHADERS_SPEC) {
-            symbolTable.insert(*new TVariable(NewPoolTString("gl_FragColor"),                   TType(EbtFloat, EbpMedium, EvqFragColor,   4)));
-            symbolTable.insert(*new TVariable(NewPoolTString("gl_FragData[gl_MaxDrawBuffers]"), TType(EbtFloat, EbpMedium, EvqFragData,    4)));
+            symbolTable.insert(ESSL1_BUILTINS, new TVariable(NewPoolTString("gl_FragColor"), TType(EbtFloat, EbpMedium, EvqFragColor,   4)));
+            symbolTable.insert(ESSL1_BUILTINS, new TVariable(NewPoolTString("gl_FragData[gl_MaxDrawBuffers]"), TType(EbtFloat, EbpMedium, EvqFragData,    4)));
             if (resources.EXT_frag_depth) {
-                symbolTable.insert(*new TVariable(NewPoolTString("gl_FragDepthEXT"),            TType(EbtFloat, resources.FragmentPrecisionHigh ? EbpHigh : EbpMedium, EvqFragDepth, 1)));
-                symbolTable.relateToExtension("gl_FragDepthEXT", "GL_EXT_frag_depth");
+                symbolTable.insert(ESSL1_BUILTINS, new TVariable(NewPoolTString("gl_FragDepthEXT"), TType(EbtFloat, resources.FragmentPrecisionHigh ? EbpHigh : EbpMedium, EvqFragDepth, 1)));
+                symbolTable.relateToExtension(ESSL1_BUILTINS, "gl_FragDepthEXT", "GL_EXT_frag_depth");
             }
         } else {
-            symbolTable.insert(*new TVariable(NewPoolTString("css_MixColor"),                   TType(EbtFloat, EbpMedium, EvqGlobal,      4)));
-            symbolTable.insert(*new TVariable(NewPoolTString("css_ColorMatrix"),                TType(EbtFloat, EbpMedium, EvqGlobal,      4, true)));
+            symbolTable.insert(ESSL1_BUILTINS, new TVariable(NewPoolTString("css_MixColor"), TType(EbtFloat, EbpMedium, EvqGlobal,      4)));
+            symbolTable.insert(ESSL1_BUILTINS, new TVariable(NewPoolTString("css_ColorMatrix"), TType(EbtFloat, EbpMedium, EvqGlobal,      4, 4)));
         }
 
         break;
 
-    case SH_VERTEX_SHADER:
-        symbolTable.insert(*new TVariable(NewPoolTString("gl_Position"),    TType(EbtFloat, EbpHigh, EvqPosition,    4)));
-        symbolTable.insert(*new TVariable(NewPoolTString("gl_PointSize"),   TType(EbtFloat, EbpMedium, EvqPointSize,   1)));
+    case GL_VERTEX_SHADER:
+        symbolTable.insert(COMMON_BUILTINS, new TVariable(NewPoolTString("gl_Position"), TType(EbtFloat, EbpHigh, EvqPosition,    4)));
+        symbolTable.insert(COMMON_BUILTINS, new TVariable(NewPoolTString("gl_PointSize"), TType(EbtFloat, EbpMedium, EvqPointSize,   1)));
         break;
 
     default: assert(false && "Language not supported");
@@ -464,84 +641,102 @@ void IdentifyBuiltIns(ShShaderType type, ShShaderSpec spec,
     // expected to be resolved through a library of functions, versus as
     // operations.
     //
-    symbolTable.relateToOperator("matrixCompMult",   EOpMul);
-
-    symbolTable.relateToOperator("equal",            EOpVectorEqual);
-    symbolTable.relateToOperator("notEqual",         EOpVectorNotEqual);
-    symbolTable.relateToOperator("lessThan",         EOpLessThan);
-    symbolTable.relateToOperator("greaterThan",      EOpGreaterThan);
-    symbolTable.relateToOperator("lessThanEqual",    EOpLessThanEqual);
-    symbolTable.relateToOperator("greaterThanEqual", EOpGreaterThanEqual);
-    
-    symbolTable.relateToOperator("radians",      EOpRadians);
-    symbolTable.relateToOperator("degrees",      EOpDegrees);
-    symbolTable.relateToOperator("sin",          EOpSin);
-    symbolTable.relateToOperator("cos",          EOpCos);
-    symbolTable.relateToOperator("tan",          EOpTan);
-    symbolTable.relateToOperator("asin",         EOpAsin);
-    symbolTable.relateToOperator("acos",         EOpAcos);
-    symbolTable.relateToOperator("atan",         EOpAtan);
-
-    symbolTable.relateToOperator("pow",          EOpPow);
-    symbolTable.relateToOperator("exp2",         EOpExp2);
-    symbolTable.relateToOperator("log",          EOpLog);
-    symbolTable.relateToOperator("exp",          EOpExp);
-    symbolTable.relateToOperator("log2",         EOpLog2);
-    symbolTable.relateToOperator("sqrt",         EOpSqrt);
-    symbolTable.relateToOperator("inversesqrt",  EOpInverseSqrt);
-
-    symbolTable.relateToOperator("abs",          EOpAbs);
-    symbolTable.relateToOperator("sign",         EOpSign);
-    symbolTable.relateToOperator("floor",        EOpFloor);
-    symbolTable.relateToOperator("ceil",         EOpCeil);
-    symbolTable.relateToOperator("fract",        EOpFract);
-    symbolTable.relateToOperator("mod",          EOpMod);
-    symbolTable.relateToOperator("min",          EOpMin);
-    symbolTable.relateToOperator("max",          EOpMax);
-    symbolTable.relateToOperator("clamp",        EOpClamp);
-    symbolTable.relateToOperator("mix",          EOpMix);
-    symbolTable.relateToOperator("step",         EOpStep);
-    symbolTable.relateToOperator("smoothstep",   EOpSmoothStep);
-
-    symbolTable.relateToOperator("length",       EOpLength);
-    symbolTable.relateToOperator("distance",     EOpDistance);
-    symbolTable.relateToOperator("dot",          EOpDot);
-    symbolTable.relateToOperator("cross",        EOpCross);
-    symbolTable.relateToOperator("normalize",    EOpNormalize);
-    symbolTable.relateToOperator("faceforward",  EOpFaceForward);
-    symbolTable.relateToOperator("reflect",      EOpReflect);
-    symbolTable.relateToOperator("refract",      EOpRefract);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "matrixCompMult",   EOpMul);
+
+    symbolTable.relateToOperator(COMMON_BUILTINS, "equal",            EOpVectorEqual);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "notEqual",         EOpVectorNotEqual);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "lessThan",         EOpLessThan);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "greaterThan",      EOpGreaterThan);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "lessThanEqual",    EOpLessThanEqual);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "greaterThanEqual", EOpGreaterThanEqual);
     
-    symbolTable.relateToOperator("any",          EOpAny);
-    symbolTable.relateToOperator("all",          EOpAll);
-    symbolTable.relateToOperator("not",          EOpVectorLogicalNot);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "radians",      EOpRadians);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "degrees",      EOpDegrees);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "sin",          EOpSin);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "cos",          EOpCos);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "tan",          EOpTan);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "asin",         EOpAsin);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "acos",         EOpAcos);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "atan",         EOpAtan);
+
+    symbolTable.relateToOperator(COMMON_BUILTINS, "pow",          EOpPow);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "exp2",         EOpExp2);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "log",          EOpLog);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "exp",          EOpExp);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "log2",         EOpLog2);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "sqrt",         EOpSqrt);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "inversesqrt",  EOpInverseSqrt);
+
+    symbolTable.relateToOperator(COMMON_BUILTINS, "abs",          EOpAbs);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "sign",         EOpSign);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "floor",        EOpFloor);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "ceil",         EOpCeil);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "fract",        EOpFract);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "mod",          EOpMod);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "min",          EOpMin);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "max",          EOpMax);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "clamp",        EOpClamp);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "mix",          EOpMix);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "step",         EOpStep);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "smoothstep",   EOpSmoothStep);
+
+    symbolTable.relateToOperator(COMMON_BUILTINS, "length",       EOpLength);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "distance",     EOpDistance);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "dot",          EOpDot);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "cross",        EOpCross);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "normalize",    EOpNormalize);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "faceforward",  EOpFaceForward);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "reflect",      EOpReflect);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "refract",      EOpRefract);
+
+    symbolTable.relateToOperator(COMMON_BUILTINS, "any",          EOpAny);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "all",          EOpAll);
+    symbolTable.relateToOperator(COMMON_BUILTINS, "not",          EOpVectorLogicalNot);
 
     // Map language-specific operators.
     switch(type) {
-    case SH_VERTEX_SHADER:
+    case GL_VERTEX_SHADER:
         break;
-    case SH_FRAGMENT_SHADER:
-        if (resources.OES_standard_derivatives) {
-            symbolTable.relateToOperator("dFdx",   EOpDFdx);
-            symbolTable.relateToOperator("dFdy",   EOpDFdy);
-            symbolTable.relateToOperator("fwidth", EOpFwidth);
-
-            symbolTable.relateToExtension("dFdx", "GL_OES_standard_derivatives");
-            symbolTable.relateToExtension("dFdy", "GL_OES_standard_derivatives");
-            symbolTable.relateToExtension("fwidth", "GL_OES_standard_derivatives");
+    case GL_FRAGMENT_SHADER:
+        if (resources.OES_standard_derivatives)
+        {
+            symbolTable.relateToOperator(ESSL1_BUILTINS, "dFdx",   EOpDFdx);
+            symbolTable.relateToOperator(ESSL1_BUILTINS, "dFdy",   EOpDFdy);
+            symbolTable.relateToOperator(ESSL1_BUILTINS, "fwidth", EOpFwidth);
+
+            symbolTable.relateToExtension(ESSL1_BUILTINS, "dFdx", "GL_OES_standard_derivatives");
+            symbolTable.relateToExtension(ESSL1_BUILTINS, "dFdy", "GL_OES_standard_derivatives");
+            symbolTable.relateToExtension(ESSL1_BUILTINS, "fwidth", "GL_OES_standard_derivatives");
+        }
+        if (resources.EXT_shader_texture_lod)
+        {
+            symbolTable.relateToExtension(ESSL1_BUILTINS, "texture2DLodEXT", "GL_EXT_shader_texture_lod");
+            symbolTable.relateToExtension(ESSL1_BUILTINS, "texture2DProjLodEXT", "GL_EXT_shader_texture_lod");
+            symbolTable.relateToExtension(ESSL1_BUILTINS, "textureCubeLodEXT", "GL_EXT_shader_texture_lod");
         }
         break;
     default: break;
     }
 
+    symbolTable.relateToOperator(ESSL3_BUILTINS, "dFdx",   EOpDFdx);
+    symbolTable.relateToOperator(ESSL3_BUILTINS, "dFdy",   EOpDFdy);
+    symbolTable.relateToOperator(ESSL3_BUILTINS, "fwidth", EOpFwidth);
+
+    if (resources.EXT_shader_texture_lod)
+    {
+        symbolTable.relateToExtension(ESSL1_BUILTINS, "texture2DGradEXT", "GL_EXT_shader_texture_lod");
+        symbolTable.relateToExtension(ESSL1_BUILTINS, "texture2DProjGradEXT", "GL_EXT_shader_texture_lod");
+        symbolTable.relateToExtension(ESSL1_BUILTINS, "textureCubeGradEXT", "GL_EXT_shader_texture_lod");
+    }
+
     // Finally add resource-specific variables.
     switch(type) {
-    case SH_FRAGMENT_SHADER:
+    case GL_FRAGMENT_SHADER:
         if (spec != SH_CSS_SHADERS_SPEC) {
             // Set up gl_FragData.  The array size.
-            TType fragData(EbtFloat, EbpMedium, EvqFragData, 4, false, true);
+            TType fragData(EbtFloat, EbpMedium, EvqFragData, 4, 1, true);
             fragData.setArraySize(resources.MaxDrawBuffers);
-            symbolTable.insert(*new TVariable(NewPoolTString("gl_FragData"),    fragData));
+            symbolTable.insert(ESSL1_BUILTINS, new TVariable(NewPoolTString("gl_FragData"), fragData));
         }
         break;
     default: break;
@@ -561,4 +756,6 @@ void InitExtensionBehavior(const ShBuiltInResources& resources,
         extBehavior["GL_EXT_draw_buffers"] = EBhUndefined;
     if (resources.EXT_frag_depth)
         extBehavior["GL_EXT_frag_depth"] = EBhUndefined;
+    if (resources.EXT_shader_texture_lod)
+        extBehavior["GL_EXT_shader_texture_lod"] = EBhUndefined;
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/Initialize.h b/src/3rdparty/angle/src/compiler/translator/Initialize.h
index b5642869aa..cc1862c90e 100644
--- a/src/3rdparty/angle/src/compiler/translator/Initialize.h
+++ b/src/3rdparty/angle/src/compiler/translator/Initialize.h
@@ -8,12 +8,12 @@
 #define _INITIALIZE_INCLUDED_
 
 #include "compiler/translator/Common.h"
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/Compiler.h"
 #include "compiler/translator/SymbolTable.h"
 
-void InsertBuiltInFunctions(ShShaderType type, ShShaderSpec spec, const ShBuiltInResources &resources, TSymbolTable &table);
+void InsertBuiltInFunctions(sh::GLenum type, ShShaderSpec spec, const ShBuiltInResources &resources, TSymbolTable &table);
 
-void IdentifyBuiltIns(ShShaderType type, ShShaderSpec spec,
+void IdentifyBuiltIns(sh::GLenum type, ShShaderSpec spec,
                       const ShBuiltInResources& resources,
                       TSymbolTable& symbolTable);
 
diff --git a/src/3rdparty/angle/src/compiler/translator/InitializeDll.cpp b/src/3rdparty/angle/src/compiler/translator/InitializeDll.cpp
index 43f81784d0..c98430662a 100644
--- a/src/3rdparty/angle/src/compiler/translator/InitializeDll.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/InitializeDll.cpp
@@ -5,10 +5,12 @@
 //
 
 #include "compiler/translator/InitializeDll.h"
-
 #include "compiler/translator/InitializeGlobals.h"
 #include "compiler/translator/InitializeParseContext.h"
-#include "compiler/translator/osinclude.h"
+
+#include "common/platform.h"
+
+#include <assert.h>
 
 bool InitProcess()
 {
diff --git a/src/3rdparty/angle/src/compiler/translator/InitializeParseContext.cpp b/src/3rdparty/angle/src/compiler/translator/InitializeParseContext.cpp
index b4defae569..c35cedb348 100644
--- a/src/3rdparty/angle/src/compiler/translator/InitializeParseContext.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/InitializeParseContext.cpp
@@ -6,35 +6,37 @@
 
 #include "compiler/translator/InitializeParseContext.h"
 
-#include "compiler/translator/osinclude.h"
+#include "common/tls.h"
 
-OS_TLSIndex GlobalParseContextIndex = OS_INVALID_TLS_INDEX;
+#include <assert.h>
+
+TLSIndex GlobalParseContextIndex = TLS_INVALID_INDEX;
 
 bool InitializeParseContextIndex()
 {
-    assert(GlobalParseContextIndex == OS_INVALID_TLS_INDEX);
+    assert(GlobalParseContextIndex == TLS_INVALID_INDEX);
 
-    GlobalParseContextIndex = OS_AllocTLSIndex();
-    return GlobalParseContextIndex != OS_INVALID_TLS_INDEX;
+    GlobalParseContextIndex = CreateTLSIndex();
+    return GlobalParseContextIndex != TLS_INVALID_INDEX;
 }
 
 void FreeParseContextIndex()
 {
-    assert(GlobalParseContextIndex != OS_INVALID_TLS_INDEX);
+    assert(GlobalParseContextIndex != TLS_INVALID_INDEX);
 
-    OS_FreeTLSIndex(GlobalParseContextIndex);
-    GlobalParseContextIndex = OS_INVALID_TLS_INDEX;
+    DestroyTLSIndex(GlobalParseContextIndex);
+    GlobalParseContextIndex = TLS_INVALID_INDEX;
 }
 
 void SetGlobalParseContext(TParseContext* context)
 {
-    assert(GlobalParseContextIndex != OS_INVALID_TLS_INDEX);
-    OS_SetTLSValue(GlobalParseContextIndex, context);
+    assert(GlobalParseContextIndex != TLS_INVALID_INDEX);
+    SetTLSValue(GlobalParseContextIndex, context);
 }
 
 TParseContext* GetGlobalParseContext()
 {
-    assert(GlobalParseContextIndex != OS_INVALID_TLS_INDEX);
-    return static_cast<TParseContext*>(OS_GetTLSValue(GlobalParseContextIndex));
+    assert(GlobalParseContextIndex != TLS_INVALID_INDEX);
+    return static_cast<TParseContext*>(GetTLSValue(GlobalParseContextIndex));
 }
 
diff --git a/src/3rdparty/angle/src/compiler/translator/InitializeVariables.cpp b/src/3rdparty/angle/src/compiler/translator/InitializeVariables.cpp
index 115c561c77..0e3e2ebe55 100644
--- a/src/3rdparty/angle/src/compiler/translator/InitializeVariables.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/InitializeVariables.cpp
@@ -10,7 +10,7 @@
 namespace
 {
 
-TIntermConstantUnion* constructFloatConstUnionNode(const TType& type)
+TIntermConstantUnion *constructFloatConstUnionNode(const TType &type)
 {
     TType myType = type;
     unsigned char size = myType.getNominalSize();
@@ -26,7 +26,7 @@ TIntermConstantUnion* constructFloatConstUnionNode(const TType& type)
     return node;
 }
 
-TIntermConstantUnion* constructIndexNode(int index)
+TIntermConstantUnion *constructIndexNode(int index)
 {
     ConstantUnion *u = new ConstantUnion[1];
     u[0].setIConst(index);
@@ -38,7 +38,7 @@ TIntermConstantUnion* constructIndexNode(int index)
 
 }  // namespace anonymous
 
-bool InitializeVariables::visitAggregate(Visit visit, TIntermAggregate* node)
+bool InitializeVariables::visitAggregate(Visit visit, TIntermAggregate *node)
 {
     bool visitChildren = !mCodeInserted;
     switch (node->getOp())
@@ -51,17 +51,17 @@ bool InitializeVariables::visitAggregate(Visit visit, TIntermAggregate* node)
         ASSERT(visit == PreVisit);
         if (node->getName() == "main(")
         {
-            TIntermSequence &sequence = node->getSequence();
-            ASSERT((sequence.size() == 1) || (sequence.size() == 2));
+            TIntermSequence *sequence = node->getSequence();
+            ASSERT((sequence->size() == 1) || (sequence->size() == 2));
             TIntermAggregate *body = NULL;
-            if (sequence.size() == 1)
+            if (sequence->size() == 1)
             {
                 body = new TIntermAggregate(EOpSequence);
-                sequence.push_back(body);
+                sequence->push_back(body);
             }
             else
             {
-                body = sequence[1]->getAsAggregate();
+                body = (*sequence)[1]->getAsAggregate();
             }
             ASSERT(body);
             insertInitCode(body->getSequence());
@@ -76,18 +76,18 @@ bool InitializeVariables::visitAggregate(Visit visit, TIntermAggregate* node)
     return visitChildren;
 }
 
-void InitializeVariables::insertInitCode(TIntermSequence& sequence)
+void InitializeVariables::insertInitCode(TIntermSequence *sequence)
 {
     for (size_t ii = 0; ii < mVariables.size(); ++ii)
     {
-        const InitVariableInfo& varInfo = mVariables[ii];
+        const InitVariableInfo &varInfo = mVariables[ii];
 
         if (varInfo.type.isArray())
         {
             for (int index = varInfo.type.getArraySize() - 1; index >= 0; --index)
             {
                 TIntermBinary *assign = new TIntermBinary(EOpAssign);
-                sequence.insert(sequence.begin(), assign);
+                sequence->insert(sequence->begin(), assign);
 
                 TIntermBinary *indexDirect = new TIntermBinary(EOpIndexDirect);
                 TIntermSymbol *symbol = new TIntermSymbol(0, varInfo.name, varInfo.type);
@@ -104,7 +104,7 @@ void InitializeVariables::insertInitCode(TIntermSequence& sequence)
         else
         {
             TIntermBinary *assign = new TIntermBinary(EOpAssign);
-            sequence.insert(sequence.begin(), assign);
+            sequence->insert(sequence->begin(), assign);
             TIntermSymbol *symbol = new TIntermSymbol(0, varInfo.name, varInfo.type);
             assign->setLeft(symbol);
             TIntermConstantUnion *zeroConst = constructFloatConstUnionNode(varInfo.type);
diff --git a/src/3rdparty/angle/src/compiler/translator/InitializeVariables.h b/src/3rdparty/angle/src/compiler/translator/InitializeVariables.h
index 1cd6d7e1b5..59c3ea0a39 100644
--- a/src/3rdparty/angle/src/compiler/translator/InitializeVariables.h
+++ b/src/3rdparty/angle/src/compiler/translator/InitializeVariables.h
@@ -7,7 +7,7 @@
 #ifndef COMPILER_INITIALIZE_VARIABLES_H_
 #define COMPILER_INITIALIZE_VARIABLES_H_
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 class InitializeVariables : public TIntermTraverser
 {
@@ -17,7 +17,7 @@ class InitializeVariables : public TIntermTraverser
         TString name;
         TType type;
 
-        InitVariableInfo(const TString& _name, const TType& _type)
+        InitVariableInfo(const TString &_name, const TType &_type)
             : name(_name),
               type(_type)
         {
@@ -25,23 +25,23 @@ class InitializeVariables : public TIntermTraverser
     };
     typedef TVector<InitVariableInfo> InitVariableInfoList;
 
-    InitializeVariables(const InitVariableInfoList& vars)
+    InitializeVariables(const InitVariableInfoList &vars)
         : mCodeInserted(false),
           mVariables(vars)
     {
     }
 
   protected:
-    virtual bool visitBinary(Visit visit, TIntermBinary* node) { return false; }
-    virtual bool visitUnary(Visit visit, TIntermUnary* node) { return false; }
-    virtual bool visitSelection(Visit visit, TIntermSelection* node) { return false; }
-    virtual bool visitLoop(Visit visit, TIntermLoop* node) { return false; }
-    virtual bool visitBranch(Visit visit, TIntermBranch* node) { return false; }
+    virtual bool visitBinary(Visit, TIntermBinary *node) { return false; }
+    virtual bool visitUnary(Visit, TIntermUnary *node) { return false; }
+    virtual bool visitSelection(Visit, TIntermSelection *node) { return false; }
+    virtual bool visitLoop(Visit, TIntermLoop *node) { return false; }
+    virtual bool visitBranch(Visit, TIntermBranch *node) { return false; }
 
     virtual bool visitAggregate(Visit visit, TIntermAggregate* node);
 
   private:
-    void insertInitCode(TIntermSequence& sequence);
+    void insertInitCode(TIntermSequence *sequence);
 
     InitVariableInfoList mVariables;
     bool mCodeInserted;
diff --git a/src/3rdparty/angle/src/compiler/translator/IntermNode.cpp b/src/3rdparty/angle/src/compiler/translator/IntermNode.cpp
new file mode 100644
index 0000000000..b155545ad2
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/IntermNode.cpp
@@ -0,0 +1,1107 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+//
+// Build the intermediate representation.
+//
+
+#include <float.h>
+#include <limits.h>
+#include <algorithm>
+
+#include "compiler/translator/HashNames.h"
+#include "compiler/translator/IntermNode.h"
+#include "compiler/translator/SymbolTable.h"
+
+namespace
+{
+
+TPrecision GetHigherPrecision(TPrecision left, TPrecision right)
+{
+    return left > right ? left : right;
+}
+
+bool ValidateMultiplication(TOperator op, const TType &left, const TType &right)
+{
+    switch (op)
+    {
+      case EOpMul:
+      case EOpMulAssign:
+        return left.getNominalSize() == right.getNominalSize() &&
+               left.getSecondarySize() == right.getSecondarySize();
+      case EOpVectorTimesScalar:
+      case EOpVectorTimesScalarAssign:
+        return true;
+      case EOpVectorTimesMatrix:
+        return left.getNominalSize() == right.getRows();
+      case EOpVectorTimesMatrixAssign:
+        return left.getNominalSize() == right.getRows() &&
+               left.getNominalSize() == right.getCols();
+      case EOpMatrixTimesVector:
+        return left.getCols() == right.getNominalSize();
+      case EOpMatrixTimesScalar:
+      case EOpMatrixTimesScalarAssign:
+        return true;
+      case EOpMatrixTimesMatrix:
+        return left.getCols() == right.getRows();
+      case EOpMatrixTimesMatrixAssign:
+        return left.getCols() == right.getCols() &&
+               left.getRows() == right.getRows();
+
+      default:
+        UNREACHABLE();
+        return false;
+    }
+}
+
+bool CompareStructure(const TType& leftNodeType,
+                      ConstantUnion *rightUnionArray,
+                      ConstantUnion *leftUnionArray);
+
+bool CompareStruct(const TType &leftNodeType,
+                   ConstantUnion *rightUnionArray,
+                   ConstantUnion *leftUnionArray)
+{
+    const TFieldList &fields = leftNodeType.getStruct()->fields();
+
+    size_t structSize = fields.size();
+    size_t index = 0;
+
+    for (size_t j = 0; j < structSize; j++)
+    {
+        size_t size = fields[j]->type()->getObjectSize();
+        for (size_t i = 0; i < size; i++)
+        {
+            if (fields[j]->type()->getBasicType() == EbtStruct)
+            {
+                if (!CompareStructure(*fields[j]->type(),
+                                      &rightUnionArray[index],
+                                      &leftUnionArray[index]))
+                {
+                    return false;
+                }
+            }
+            else
+            {
+                if (leftUnionArray[index] != rightUnionArray[index])
+                    return false;
+                index++;
+            }
+        }
+    }
+    return true;
+}
+
+bool CompareStructure(const TType &leftNodeType,
+                      ConstantUnion *rightUnionArray,
+                      ConstantUnion *leftUnionArray)
+{
+    if (leftNodeType.isArray())
+    {
+        TType typeWithoutArrayness = leftNodeType;
+        typeWithoutArrayness.clearArrayness();
+
+        size_t arraySize = leftNodeType.getArraySize();
+
+        for (size_t i = 0; i < arraySize; ++i)
+        {
+            size_t offset = typeWithoutArrayness.getObjectSize() * i;
+            if (!CompareStruct(typeWithoutArrayness,
+                               &rightUnionArray[offset],
+                               &leftUnionArray[offset]))
+            {
+                return false;
+            }
+        }
+    }
+    else
+    {
+        return CompareStruct(leftNodeType, rightUnionArray, leftUnionArray);
+    }
+    return true;
+}
+
+}  // namespace anonymous
+
+
+////////////////////////////////////////////////////////////////
+//
+// Member functions of the nodes used for building the tree.
+//
+////////////////////////////////////////////////////////////////
+
+#define REPLACE_IF_IS(node, type, original, replacement) \
+    if (node == original) { \
+        node = static_cast<type *>(replacement); \
+        return true; \
+    }
+
+bool TIntermLoop::replaceChildNode(
+    TIntermNode *original, TIntermNode *replacement)
+{
+    REPLACE_IF_IS(mInit, TIntermNode, original, replacement);
+    REPLACE_IF_IS(mCond, TIntermTyped, original, replacement);
+    REPLACE_IF_IS(mExpr, TIntermTyped, original, replacement);
+    REPLACE_IF_IS(mBody, TIntermNode, original, replacement);
+    return false;
+}
+
+void TIntermLoop::enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const
+{
+    if (mInit)
+    {
+        nodeQueue->push(mInit);
+    }
+    if (mCond)
+    {
+        nodeQueue->push(mCond);
+    }
+    if (mExpr)
+    {
+        nodeQueue->push(mExpr);
+    }
+    if (mBody)
+    {
+        nodeQueue->push(mBody);
+    }
+}
+
+bool TIntermBranch::replaceChildNode(
+    TIntermNode *original, TIntermNode *replacement)
+{
+    REPLACE_IF_IS(mExpression, TIntermTyped, original, replacement);
+    return false;
+}
+
+void TIntermBranch::enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const
+{
+    if (mExpression)
+    {
+        nodeQueue->push(mExpression);
+    }
+}
+
+bool TIntermBinary::replaceChildNode(
+    TIntermNode *original, TIntermNode *replacement)
+{
+    REPLACE_IF_IS(mLeft, TIntermTyped, original, replacement);
+    REPLACE_IF_IS(mRight, TIntermTyped, original, replacement);
+    return false;
+}
+
+void TIntermBinary::enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const
+{
+    if (mLeft)
+    {
+        nodeQueue->push(mLeft);
+    }
+    if (mRight)
+    {
+        nodeQueue->push(mRight);
+    }
+}
+
+bool TIntermUnary::replaceChildNode(
+    TIntermNode *original, TIntermNode *replacement)
+{
+    REPLACE_IF_IS(mOperand, TIntermTyped, original, replacement);
+    return false;
+}
+
+void TIntermUnary::enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const
+{
+    if (mOperand)
+    {
+        nodeQueue->push(mOperand);
+    }
+}
+
+bool TIntermAggregate::replaceChildNode(
+    TIntermNode *original, TIntermNode *replacement)
+{
+    for (size_t ii = 0; ii < mSequence.size(); ++ii)
+    {
+        REPLACE_IF_IS(mSequence[ii], TIntermNode, original, replacement);
+    }
+    return false;
+}
+
+void TIntermAggregate::enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const
+{
+    for (size_t childIndex = 0; childIndex < mSequence.size(); childIndex++)
+    {
+        nodeQueue->push(mSequence[childIndex]);
+    }
+}
+
+bool TIntermSelection::replaceChildNode(
+    TIntermNode *original, TIntermNode *replacement)
+{
+    REPLACE_IF_IS(mCondition, TIntermTyped, original, replacement);
+    REPLACE_IF_IS(mTrueBlock, TIntermNode, original, replacement);
+    REPLACE_IF_IS(mFalseBlock, TIntermNode, original, replacement);
+    return false;
+}
+
+void TIntermSelection::enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const
+{
+    if (mCondition)
+    {
+        nodeQueue->push(mCondition);
+    }
+    if (mTrueBlock)
+    {
+        nodeQueue->push(mTrueBlock);
+    }
+    if (mFalseBlock)
+    {
+        nodeQueue->push(mFalseBlock);
+    }
+}
+
+//
+// Say whether or not an operation node changes the value of a variable.
+//
+bool TIntermOperator::isAssignment() const
+{
+    switch (mOp)
+    {
+      case EOpPostIncrement:
+      case EOpPostDecrement:
+      case EOpPreIncrement:
+      case EOpPreDecrement:
+      case EOpAssign:
+      case EOpAddAssign:
+      case EOpSubAssign:
+      case EOpMulAssign:
+      case EOpVectorTimesMatrixAssign:
+      case EOpVectorTimesScalarAssign:
+      case EOpMatrixTimesScalarAssign:
+      case EOpMatrixTimesMatrixAssign:
+      case EOpDivAssign:
+        return true;
+      default:
+        return false;
+    }
+}
+
+//
+// returns true if the operator is for one of the constructors
+//
+bool TIntermOperator::isConstructor() const
+{
+    switch (mOp)
+    {
+      case EOpConstructVec2:
+      case EOpConstructVec3:
+      case EOpConstructVec4:
+      case EOpConstructMat2:
+      case EOpConstructMat3:
+      case EOpConstructMat4:
+      case EOpConstructFloat:
+      case EOpConstructIVec2:
+      case EOpConstructIVec3:
+      case EOpConstructIVec4:
+      case EOpConstructInt:
+      case EOpConstructUVec2:
+      case EOpConstructUVec3:
+      case EOpConstructUVec4:
+      case EOpConstructUInt:
+      case EOpConstructBVec2:
+      case EOpConstructBVec3:
+      case EOpConstructBVec4:
+      case EOpConstructBool:
+      case EOpConstructStruct:
+        return true;
+      default:
+        return false;
+    }
+}
+
+//
+// Make sure the type of a unary operator is appropriate for its
+// combination of operation and operand type.
+//
+// Returns false in nothing makes sense.
+//
+bool TIntermUnary::promote(TInfoSink &)
+{
+    switch (mOp)
+    {
+      case EOpLogicalNot:
+        if (mOperand->getBasicType() != EbtBool)
+            return false;
+        break;
+      case EOpNegative:
+      case EOpPostIncrement:
+      case EOpPostDecrement:
+      case EOpPreIncrement:
+      case EOpPreDecrement:
+        if (mOperand->getBasicType() == EbtBool)
+            return false;
+        break;
+
+      // operators for built-ins are already type checked against their prototype
+      case EOpAny:
+      case EOpAll:
+      case EOpVectorLogicalNot:
+        return true;
+
+      default:
+        if (mOperand->getBasicType() != EbtFloat)
+            return false;
+    }
+
+    setType(mOperand->getType());
+    mType.setQualifier(EvqTemporary);
+
+    return true;
+}
+
+//
+// Establishes the type of the resultant operation, as well as
+// makes the operator the correct one for the operands.
+//
+// Returns false if operator can't work on operands.
+//
+bool TIntermBinary::promote(TInfoSink &infoSink)
+{
+    // This function only handles scalars, vectors, and matrices.
+    if (mLeft->isArray() || mRight->isArray())
+    {
+        infoSink.info.message(EPrefixInternalError, getLine(),
+                              "Invalid operation for arrays");
+        return false;
+    }
+
+    // GLSL ES 2.0 does not support implicit type casting.
+    // So the basic type should always match.
+    if (mLeft->getBasicType() != mRight->getBasicType())
+    {
+        return false;
+    }
+
+    //
+    // Base assumption:  just make the type the same as the left
+    // operand.  Then only deviations from this need be coded.
+    //
+    setType(mLeft->getType());
+
+    // The result gets promoted to the highest precision.
+    TPrecision higherPrecision = GetHigherPrecision(
+        mLeft->getPrecision(), mRight->getPrecision());
+    getTypePointer()->setPrecision(higherPrecision);
+
+    // Binary operations results in temporary variables unless both
+    // operands are const.
+    if (mLeft->getQualifier() != EvqConst || mRight->getQualifier() != EvqConst)
+    {
+        getTypePointer()->setQualifier(EvqTemporary);
+    }
+
+    const int nominalSize =
+        std::max(mLeft->getNominalSize(), mRight->getNominalSize());
+
+    //
+    // All scalars or structs. Code after this test assumes this case is removed!
+    //
+    if (nominalSize == 1)
+    {
+        switch (mOp)
+        {
+          //
+          // Promote to conditional
+          //
+          case EOpEqual:
+          case EOpNotEqual:
+          case EOpLessThan:
+          case EOpGreaterThan:
+          case EOpLessThanEqual:
+          case EOpGreaterThanEqual:
+            setType(TType(EbtBool, EbpUndefined));
+            break;
+
+          //
+          // And and Or operate on conditionals
+          //
+          case EOpLogicalAnd:
+          case EOpLogicalOr:
+            // Both operands must be of type bool.
+            if (mLeft->getBasicType() != EbtBool || mRight->getBasicType() != EbtBool)
+            {
+                return false;
+            }
+            setType(TType(EbtBool, EbpUndefined));
+            break;
+
+          default:
+            break;
+        }
+        return true;
+    }
+
+    // If we reach here, at least one of the operands is vector or matrix.
+    // The other operand could be a scalar, vector, or matrix.
+    // Can these two operands be combined?
+    //
+    TBasicType basicType = mLeft->getBasicType();
+    switch (mOp)
+    {
+      case EOpMul:
+        if (!mLeft->isMatrix() && mRight->isMatrix())
+        {
+            if (mLeft->isVector())
+            {
+                mOp = EOpVectorTimesMatrix;
+                setType(TType(basicType, higherPrecision, EvqTemporary,
+                              mRight->getCols(), 1));
+            }
+            else
+            {
+                mOp = EOpMatrixTimesScalar;
+                setType(TType(basicType, higherPrecision, EvqTemporary,
+                              mRight->getCols(), mRight->getRows()));
+            }
+        }
+        else if (mLeft->isMatrix() && !mRight->isMatrix())
+        {
+            if (mRight->isVector())
+            {
+                mOp = EOpMatrixTimesVector;
+                setType(TType(basicType, higherPrecision, EvqTemporary,
+                              mLeft->getRows(), 1));
+            }
+            else
+            {
+                mOp = EOpMatrixTimesScalar;
+            }
+        }
+        else if (mLeft->isMatrix() && mRight->isMatrix())
+        {
+            mOp = EOpMatrixTimesMatrix;
+            setType(TType(basicType, higherPrecision, EvqTemporary,
+                          mRight->getCols(), mLeft->getRows()));
+        }
+        else if (!mLeft->isMatrix() && !mRight->isMatrix())
+        {
+            if (mLeft->isVector() && mRight->isVector())
+            {
+                // leave as component product
+            }
+            else if (mLeft->isVector() || mRight->isVector())
+            {
+                mOp = EOpVectorTimesScalar;
+                setType(TType(basicType, higherPrecision, EvqTemporary,
+                              nominalSize, 1));
+            }
+        }
+        else
+        {
+            infoSink.info.message(EPrefixInternalError, getLine(),
+                                  "Missing elses");
+            return false;
+        }
+
+        if (!ValidateMultiplication(mOp, mLeft->getType(), mRight->getType()))
+        {
+            return false;
+        }
+        break;
+
+      case EOpMulAssign:
+        if (!mLeft->isMatrix() && mRight->isMatrix())
+        {
+            if (mLeft->isVector())
+            {
+                mOp = EOpVectorTimesMatrixAssign;
+            }
+            else
+            {
+                return false;
+            }
+        }
+        else if (mLeft->isMatrix() && !mRight->isMatrix())
+        {
+            if (mRight->isVector())
+            {
+                return false;
+            }
+            else
+            {
+                mOp = EOpMatrixTimesScalarAssign;
+            }
+        }
+        else if (mLeft->isMatrix() && mRight->isMatrix())
+        {
+            mOp = EOpMatrixTimesMatrixAssign;
+            setType(TType(basicType, higherPrecision, EvqTemporary,
+                          mRight->getCols(), mLeft->getRows()));
+        }
+        else if (!mLeft->isMatrix() && !mRight->isMatrix())
+        {
+            if (mLeft->isVector() && mRight->isVector())
+            {
+                // leave as component product
+            }
+            else if (mLeft->isVector() || mRight->isVector())
+            {
+                if (!mLeft->isVector())
+                    return false;
+                mOp = EOpVectorTimesScalarAssign;
+                setType(TType(basicType, higherPrecision, EvqTemporary,
+                              mLeft->getNominalSize(), 1));
+            }
+        }
+        else
+        {
+            infoSink.info.message(EPrefixInternalError, getLine(),
+                                  "Missing elses");
+            return false;
+        }
+
+        if (!ValidateMultiplication(mOp, mLeft->getType(), mRight->getType()))
+        {
+            return false;
+        }
+        break;
+
+      case EOpAssign:
+      case EOpInitialize:
+      case EOpAdd:
+      case EOpSub:
+      case EOpDiv:
+      case EOpAddAssign:
+      case EOpSubAssign:
+      case EOpDivAssign:
+        if ((mLeft->isMatrix() && mRight->isVector()) ||
+            (mLeft->isVector() && mRight->isMatrix()))
+        {
+            return false;
+        }
+
+        // Are the sizes compatible?
+        if (mLeft->getNominalSize() != mRight->getNominalSize() ||
+            mLeft->getSecondarySize() != mRight->getSecondarySize())
+        {
+            // If the nominal size of operands do not match:
+            // One of them must be scalar.
+            if (!mLeft->isScalar() && !mRight->isScalar())
+                return false;
+
+            // Operator cannot be of type pure assignment.
+            if (mOp == EOpAssign || mOp == EOpInitialize)
+                return false;
+        }
+
+        {
+            const int secondarySize = std::max(
+                mLeft->getSecondarySize(), mRight->getSecondarySize());
+            setType(TType(basicType, higherPrecision, EvqTemporary,
+                          nominalSize, secondarySize));
+        }
+        break;
+
+      case EOpEqual:
+      case EOpNotEqual:
+      case EOpLessThan:
+      case EOpGreaterThan:
+      case EOpLessThanEqual:
+      case EOpGreaterThanEqual:
+        if ((mLeft->getNominalSize() != mRight->getNominalSize()) ||
+            (mLeft->getSecondarySize() != mRight->getSecondarySize()))
+        {
+            return false;
+        }
+        setType(TType(EbtBool, EbpUndefined));
+        break;
+
+      default:
+        return false;
+    }
+    return true;
+}
+
+//
+// The fold functions see if an operation on a constant can be done in place,
+// without generating run-time code.
+//
+// Returns the node to keep using, which may or may not be the node passed in.
+//
+TIntermTyped *TIntermConstantUnion::fold(
+    TOperator op, TIntermTyped *constantNode, TInfoSink &infoSink)
+{
+    ConstantUnion *unionArray = getUnionArrayPointer();
+
+    if (!unionArray)
+        return NULL;
+
+    size_t objectSize = getType().getObjectSize();
+
+    if (constantNode)
+    {
+        // binary operations
+        TIntermConstantUnion *node = constantNode->getAsConstantUnion();
+        ConstantUnion *rightUnionArray = node->getUnionArrayPointer();
+        TType returnType = getType();
+
+        if (!rightUnionArray)
+            return NULL;
+
+        // for a case like float f = 1.2 + vec4(2,3,4,5);
+        if (constantNode->getType().getObjectSize() == 1 && objectSize > 1)
+        {
+            rightUnionArray = new ConstantUnion[objectSize];
+            for (size_t i = 0; i < objectSize; ++i)
+            {
+                rightUnionArray[i] = *node->getUnionArrayPointer();
+            }
+            returnType = getType();
+        }
+        else if (constantNode->getType().getObjectSize() > 1 && objectSize == 1)
+        {
+            // for a case like float f = vec4(2,3,4,5) + 1.2;
+            unionArray = new ConstantUnion[constantNode->getType().getObjectSize()];
+            for (size_t i = 0; i < constantNode->getType().getObjectSize(); ++i)
+            {
+                unionArray[i] = *getUnionArrayPointer();
+            }
+            returnType = node->getType();
+            objectSize = constantNode->getType().getObjectSize();
+        }
+
+        ConstantUnion *tempConstArray = NULL;
+        TIntermConstantUnion *tempNode;
+
+        bool boolNodeFlag = false;
+        switch(op)
+        {
+          case EOpAdd:
+            tempConstArray = new ConstantUnion[objectSize];
+            for (size_t i = 0; i < objectSize; i++)
+                tempConstArray[i] = unionArray[i] + rightUnionArray[i];
+            break;
+          case EOpSub:
+            tempConstArray = new ConstantUnion[objectSize];
+            for (size_t i = 0; i < objectSize; i++)
+                tempConstArray[i] = unionArray[i] - rightUnionArray[i];
+            break;
+
+          case EOpMul:
+          case EOpVectorTimesScalar:
+          case EOpMatrixTimesScalar:
+            tempConstArray = new ConstantUnion[objectSize];
+            for (size_t i = 0; i < objectSize; i++)
+                tempConstArray[i] = unionArray[i] * rightUnionArray[i];
+            break;
+
+          case EOpMatrixTimesMatrix:
+            {
+                if (getType().getBasicType() != EbtFloat ||
+                    node->getBasicType() != EbtFloat)
+                {
+                    infoSink.info.message(
+                        EPrefixInternalError, getLine(),
+                        "Constant Folding cannot be done for matrix multiply");
+                    return NULL;
+                }
+
+                const int leftCols = getCols();
+                const int leftRows = getRows();
+                const int rightCols = constantNode->getType().getCols();
+                const int rightRows = constantNode->getType().getRows();
+                const int resultCols = rightCols;
+                const int resultRows = leftRows;
+
+                tempConstArray = new ConstantUnion[resultCols*resultRows];
+                for (int row = 0; row < resultRows; row++)
+                {
+                    for (int column = 0; column < resultCols; column++)
+                    {
+                        tempConstArray[resultRows * column + row].setFConst(0.0f);
+                        for (int i = 0; i < leftCols; i++)
+                        {
+                            tempConstArray[resultRows * column + row].setFConst(
+                                tempConstArray[resultRows * column + row].getFConst() +
+                                unionArray[i * leftRows + row].getFConst() *
+                                rightUnionArray[column * rightRows + i].getFConst());
+                        }
+                    }
+                }
+
+                // update return type for matrix product
+                returnType.setPrimarySize(resultCols);
+                returnType.setSecondarySize(resultRows);
+            }
+            break;
+
+          case EOpDiv:
+            {
+                tempConstArray = new ConstantUnion[objectSize];
+                for (size_t i = 0; i < objectSize; i++)
+                {
+                    switch (getType().getBasicType())
+                    {
+                      case EbtFloat:
+                        if (rightUnionArray[i] == 0.0f)
+                        {
+                            infoSink.info.message(
+                                EPrefixWarning, getLine(),
+                                "Divide by zero error during constant folding");
+                            tempConstArray[i].setFConst(
+                                unionArray[i].getFConst() < 0 ? -FLT_MAX : FLT_MAX);
+                        }
+                        else
+                        {
+                            tempConstArray[i].setFConst(
+                                unionArray[i].getFConst() /
+                                rightUnionArray[i].getFConst());
+                        }
+                        break;
+
+                      case EbtInt:
+                        if (rightUnionArray[i] == 0)
+                        {
+                            infoSink.info.message(
+                                EPrefixWarning, getLine(),
+                                "Divide by zero error during constant folding");
+                            tempConstArray[i].setIConst(INT_MAX);
+                        }
+                        else
+                        {
+                            tempConstArray[i].setIConst(
+                                unionArray[i].getIConst() /
+                                rightUnionArray[i].getIConst());
+                        }
+                        break;
+
+                      case EbtUInt:
+                        if (rightUnionArray[i] == 0)
+                        {
+                            infoSink.info.message(
+                                EPrefixWarning, getLine(),
+                                "Divide by zero error during constant folding");
+                            tempConstArray[i].setUConst(UINT_MAX);
+                        }
+                        else
+                        {
+                            tempConstArray[i].setUConst(
+                                unionArray[i].getUConst() /
+                                rightUnionArray[i].getUConst());
+                        }
+                        break;
+
+                      default:
+                        infoSink.info.message(
+                            EPrefixInternalError, getLine(),
+                            "Constant folding cannot be done for \"/\"");
+                        return NULL;
+                    }
+                }
+            }
+            break;
+
+          case EOpMatrixTimesVector:
+            {
+                if (node->getBasicType() != EbtFloat)
+                {
+                    infoSink.info.message(
+                        EPrefixInternalError, getLine(),
+                        "Constant Folding cannot be done for matrix times vector");
+                    return NULL;
+                }
+
+                const int matrixCols = getCols();
+                const int matrixRows = getRows();
+
+                tempConstArray = new ConstantUnion[matrixRows];
+
+                for (int matrixRow = 0; matrixRow < matrixRows; matrixRow++)
+                {
+                    tempConstArray[matrixRow].setFConst(0.0f);
+                    for (int col = 0; col < matrixCols; col++)
+                    {
+                        tempConstArray[matrixRow].setFConst(
+                            tempConstArray[matrixRow].getFConst() +
+                            unionArray[col * matrixRows + matrixRow].getFConst() *
+                            rightUnionArray[col].getFConst());
+                    }
+                }
+
+                returnType = node->getType();
+                returnType.setPrimarySize(matrixRows);
+
+                tempNode = new TIntermConstantUnion(tempConstArray, returnType);
+                tempNode->setLine(getLine());
+
+                return tempNode;
+            }
+
+          case EOpVectorTimesMatrix:
+            {
+                if (getType().getBasicType() != EbtFloat)
+                {
+                    infoSink.info.message(
+                        EPrefixInternalError, getLine(),
+                        "Constant Folding cannot be done for vector times matrix");
+                    return NULL;
+                }
+
+                const int matrixCols = constantNode->getType().getCols();
+                const int matrixRows = constantNode->getType().getRows();
+
+                tempConstArray = new ConstantUnion[matrixCols];
+
+                for (int matrixCol = 0; matrixCol < matrixCols; matrixCol++)
+                {
+                    tempConstArray[matrixCol].setFConst(0.0f);
+                    for (int matrixRow = 0; matrixRow < matrixRows; matrixRow++)
+                    {
+                        tempConstArray[matrixCol].setFConst(
+                            tempConstArray[matrixCol].getFConst() +
+                            unionArray[matrixRow].getFConst() *
+                            rightUnionArray[matrixCol * matrixRows + matrixRow].getFConst());
+                    }
+                }
+
+                returnType.setPrimarySize(matrixCols);
+            }
+            break;
+
+          case EOpLogicalAnd:
+            // this code is written for possible future use,
+            // will not get executed currently
+            {
+                tempConstArray = new ConstantUnion[objectSize];
+                for (size_t i = 0; i < objectSize; i++)
+                {
+                    tempConstArray[i] = unionArray[i] && rightUnionArray[i];
+                }
+            }
+            break;
+
+          case EOpLogicalOr:
+            // this code is written for possible future use,
+            // will not get executed currently
+            {
+                tempConstArray = new ConstantUnion[objectSize];
+                for (size_t i = 0; i < objectSize; i++)
+                {
+                    tempConstArray[i] = unionArray[i] || rightUnionArray[i];
+                }
+            }
+            break;
+
+          case EOpLogicalXor:
+            {
+                tempConstArray = new ConstantUnion[objectSize];
+                for (size_t i = 0; i < objectSize; i++)
+                {
+                    switch (getType().getBasicType())
+                    {
+                      case EbtBool:
+                        tempConstArray[i].setBConst(
+                            unionArray[i] == rightUnionArray[i] ? false : true);
+                        break;
+                      default:
+                        UNREACHABLE();
+                        break;
+                    }
+                }
+            }
+            break;
+
+          case EOpLessThan:
+            ASSERT(objectSize == 1);
+            tempConstArray = new ConstantUnion[1];
+            tempConstArray->setBConst(*unionArray < *rightUnionArray);
+            returnType = TType(EbtBool, EbpUndefined, EvqConst);
+            break;
+
+          case EOpGreaterThan:
+            ASSERT(objectSize == 1);
+            tempConstArray = new ConstantUnion[1];
+            tempConstArray->setBConst(*unionArray > *rightUnionArray);
+            returnType = TType(EbtBool, EbpUndefined, EvqConst);
+            break;
+
+          case EOpLessThanEqual:
+            {
+                ASSERT(objectSize == 1);
+                ConstantUnion constant;
+                constant.setBConst(*unionArray > *rightUnionArray);
+                tempConstArray = new ConstantUnion[1];
+                tempConstArray->setBConst(!constant.getBConst());
+                returnType = TType(EbtBool, EbpUndefined, EvqConst);
+                break;
+            }
+
+          case EOpGreaterThanEqual:
+            {
+                ASSERT(objectSize == 1);
+                ConstantUnion constant;
+                constant.setBConst(*unionArray < *rightUnionArray);
+                tempConstArray = new ConstantUnion[1];
+                tempConstArray->setBConst(!constant.getBConst());
+                returnType = TType(EbtBool, EbpUndefined, EvqConst);
+                break;
+            }
+
+          case EOpEqual:
+            if (getType().getBasicType() == EbtStruct)
+            {
+                if (!CompareStructure(node->getType(),
+                                      node->getUnionArrayPointer(),
+                                      unionArray))
+                {
+                    boolNodeFlag = true;
+                }
+            }
+            else
+            {
+                for (size_t i = 0; i < objectSize; i++)
+                {
+                    if (unionArray[i] != rightUnionArray[i])
+                    {
+                        boolNodeFlag = true;
+                        break;  // break out of for loop
+                    }
+                }
+            }
+
+            tempConstArray = new ConstantUnion[1];
+            if (!boolNodeFlag)
+            {
+                tempConstArray->setBConst(true);
+            }
+            else
+            {
+                tempConstArray->setBConst(false);
+            }
+
+            tempNode = new TIntermConstantUnion(
+                tempConstArray, TType(EbtBool, EbpUndefined, EvqConst));
+            tempNode->setLine(getLine());
+
+            return tempNode;
+
+          case EOpNotEqual:
+            if (getType().getBasicType() == EbtStruct)
+            {
+                if (CompareStructure(node->getType(),
+                                     node->getUnionArrayPointer(),
+                                     unionArray))
+                {
+                    boolNodeFlag = true;
+                }
+            }
+            else
+            {
+                for (size_t i = 0; i < objectSize; i++)
+                {
+                    if (unionArray[i] == rightUnionArray[i])
+                    {
+                        boolNodeFlag = true;
+                        break;  // break out of for loop
+                    }
+                }
+            }
+
+            tempConstArray = new ConstantUnion[1];
+            if (!boolNodeFlag)
+            {
+                tempConstArray->setBConst(true);
+            }
+            else
+            {
+                tempConstArray->setBConst(false);
+            }
+
+            tempNode = new TIntermConstantUnion(
+                tempConstArray, TType(EbtBool, EbpUndefined, EvqConst));
+            tempNode->setLine(getLine());
+
+            return tempNode;
+
+          default:
+            infoSink.info.message(
+                EPrefixInternalError, getLine(),
+                "Invalid operator for constant folding");
+            return NULL;
+        }
+        tempNode = new TIntermConstantUnion(tempConstArray, returnType);
+        tempNode->setLine(getLine());
+
+        return tempNode;
+    }
+    else
+    {
+        //
+        // Do unary operations
+        //
+        TIntermConstantUnion *newNode = 0;
+        ConstantUnion* tempConstArray = new ConstantUnion[objectSize];
+        for (size_t i = 0; i < objectSize; i++)
+        {
+            switch(op)
+            {
+              case EOpNegative:
+                switch (getType().getBasicType())
+                {
+                  case EbtFloat:
+                    tempConstArray[i].setFConst(-unionArray[i].getFConst());
+                    break;
+                  case EbtInt:
+                    tempConstArray[i].setIConst(-unionArray[i].getIConst());
+                    break;
+                  case EbtUInt:
+                    tempConstArray[i].setUConst(static_cast<unsigned int>(
+                        -static_cast<int>(unionArray[i].getUConst())));
+                    break;
+                  default:
+                    infoSink.info.message(
+                        EPrefixInternalError, getLine(),
+                        "Unary operation not folded into constant");
+                    return NULL;
+                }
+                break;
+
+              case EOpLogicalNot:
+                // this code is written for possible future use,
+                // will not get executed currently
+                switch (getType().getBasicType())
+                {
+                  case EbtBool:
+                    tempConstArray[i].setBConst(!unionArray[i].getBConst());
+                    break;
+                  default:
+                    infoSink.info.message(
+                        EPrefixInternalError, getLine(),
+                        "Unary operation not folded into constant");
+                    return NULL;
+                }
+                break;
+
+              default:
+                return NULL;
+            }
+        }
+        newNode = new TIntermConstantUnion(tempConstArray, getType());
+        newNode->setLine(getLine());
+        return newNode;
+    }
+}
+
+// static
+TString TIntermTraverser::hash(const TString &name, ShHashFunction64 hashFunction)
+{
+    if (hashFunction == NULL || name.empty())
+        return name;
+    khronos_uint64_t number = (*hashFunction)(name.c_str(), name.length());
+    TStringStream stream;
+    stream << HASHED_NAME_PREFIX << std::hex << number;
+    TString hashedName = stream.str();
+    return hashedName;
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/IntermNode.h b/src/3rdparty/angle/src/compiler/translator/IntermNode.h
new file mode 100644
index 0000000000..ec440da010
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/IntermNode.h
@@ -0,0 +1,772 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+//
+// Definition of the in-memory high-level intermediate representation
+// of shaders.  This is a tree that parser creates.
+//
+// Nodes in the tree are defined as a hierarchy of classes derived from
+// TIntermNode. Each is a node in a tree.  There is no preset branching factor;
+// each node can have it's own type of list of children.
+//
+
+#ifndef COMPILER_TRANSLATOR_INTERMEDIATE_H_
+#define COMPILER_TRANSLATOR_INTERMEDIATE_H_
+
+#include "GLSLANG/ShaderLang.h"
+
+#include <algorithm>
+#include <queue>
+
+#include "compiler/translator/Common.h"
+#include "compiler/translator/Types.h"
+#include "compiler/translator/ConstantUnion.h"
+
+//
+// Operators used by the high-level (parse tree) representation.
+//
+enum TOperator
+{
+    EOpNull,            // if in a node, should only mean a node is still being built
+    EOpSequence,        // denotes a list of statements, or parameters, etc.
+    EOpFunctionCall,
+    EOpFunction,        // For function definition
+    EOpParameters,      // an aggregate listing the parameters to a function
+
+    EOpDeclaration,
+    EOpInvariantDeclaration, // Specialized declarations for attributing invariance
+    EOpPrototype,
+
+    //
+    // Unary operators
+    //
+
+    EOpNegative,
+    EOpLogicalNot,
+    EOpVectorLogicalNot,
+
+    EOpPostIncrement,
+    EOpPostDecrement,
+    EOpPreIncrement,
+    EOpPreDecrement,
+
+    //
+    // binary operations
+    //
+
+    EOpAdd,
+    EOpSub,
+    EOpMul,
+    EOpDiv,
+    EOpEqual,
+    EOpNotEqual,
+    EOpVectorEqual,
+    EOpVectorNotEqual,
+    EOpLessThan,
+    EOpGreaterThan,
+    EOpLessThanEqual,
+    EOpGreaterThanEqual,
+    EOpComma,
+
+    EOpVectorTimesScalar,
+    EOpVectorTimesMatrix,
+    EOpMatrixTimesVector,
+    EOpMatrixTimesScalar,
+
+    EOpLogicalOr,
+    EOpLogicalXor,
+    EOpLogicalAnd,
+
+    EOpIndexDirect,
+    EOpIndexIndirect,
+    EOpIndexDirectStruct,
+    EOpIndexDirectInterfaceBlock,
+
+    EOpVectorSwizzle,
+
+    //
+    // Built-in functions potentially mapped to operators
+    //
+
+    EOpRadians,
+    EOpDegrees,
+    EOpSin,
+    EOpCos,
+    EOpTan,
+    EOpAsin,
+    EOpAcos,
+    EOpAtan,
+
+    EOpPow,
+    EOpExp,
+    EOpLog,
+    EOpExp2,
+    EOpLog2,
+    EOpSqrt,
+    EOpInverseSqrt,
+
+    EOpAbs,
+    EOpSign,
+    EOpFloor,
+    EOpCeil,
+    EOpFract,
+    EOpMod,
+    EOpMin,
+    EOpMax,
+    EOpClamp,
+    EOpMix,
+    EOpStep,
+    EOpSmoothStep,
+
+    EOpLength,
+    EOpDistance,
+    EOpDot,
+    EOpCross,
+    EOpNormalize,
+    EOpFaceForward,
+    EOpReflect,
+    EOpRefract,
+
+    EOpDFdx,            // Fragment only, OES_standard_derivatives extension
+    EOpDFdy,            // Fragment only, OES_standard_derivatives extension
+    EOpFwidth,          // Fragment only, OES_standard_derivatives extension
+
+    EOpMatrixTimesMatrix,
+
+    EOpAny,
+    EOpAll,
+
+    //
+    // Branch
+    //
+
+    EOpKill,            // Fragment only
+    EOpReturn,
+    EOpBreak,
+    EOpContinue,
+
+    //
+    // Constructors
+    //
+
+    EOpConstructInt,
+    EOpConstructUInt,
+    EOpConstructBool,
+    EOpConstructFloat,
+    EOpConstructVec2,
+    EOpConstructVec3,
+    EOpConstructVec4,
+    EOpConstructBVec2,
+    EOpConstructBVec3,
+    EOpConstructBVec4,
+    EOpConstructIVec2,
+    EOpConstructIVec3,
+    EOpConstructIVec4,
+    EOpConstructUVec2,
+    EOpConstructUVec3,
+    EOpConstructUVec4,
+    EOpConstructMat2,
+    EOpConstructMat3,
+    EOpConstructMat4,
+    EOpConstructStruct,
+
+    //
+    // moves
+    //
+
+    EOpAssign,
+    EOpInitialize,
+    EOpAddAssign,
+    EOpSubAssign,
+    EOpMulAssign,
+    EOpVectorTimesMatrixAssign,
+    EOpVectorTimesScalarAssign,
+    EOpMatrixTimesScalarAssign,
+    EOpMatrixTimesMatrixAssign,
+    EOpDivAssign
+};
+
+class TIntermTraverser;
+class TIntermAggregate;
+class TIntermBinary;
+class TIntermUnary;
+class TIntermConstantUnion;
+class TIntermSelection;
+class TIntermTyped;
+class TIntermSymbol;
+class TIntermLoop;
+class TInfoSink;
+class TIntermRaw;
+
+//
+// Base class for the tree nodes
+//
+class TIntermNode
+{
+  public:
+    POOL_ALLOCATOR_NEW_DELETE();
+    TIntermNode()
+    {
+        // TODO: Move this to TSourceLoc constructor
+        // after getting rid of TPublicType.
+        mLine.first_file = mLine.last_file = 0;
+        mLine.first_line = mLine.last_line = 0;
+    }
+    virtual ~TIntermNode() { }
+
+    const TSourceLoc &getLine() const { return mLine; }
+    void setLine(const TSourceLoc &l) { mLine = l; }
+
+    virtual void traverse(TIntermTraverser *) = 0;
+    virtual TIntermTyped *getAsTyped() { return 0; }
+    virtual TIntermConstantUnion *getAsConstantUnion() { return 0; }
+    virtual TIntermAggregate *getAsAggregate() { return 0; }
+    virtual TIntermBinary *getAsBinaryNode() { return 0; }
+    virtual TIntermUnary *getAsUnaryNode() { return 0; }
+    virtual TIntermSelection *getAsSelectionNode() { return 0; }
+    virtual TIntermSymbol *getAsSymbolNode() { return 0; }
+    virtual TIntermLoop *getAsLoopNode() { return 0; }
+    virtual TIntermRaw *getAsRawNode() { return 0; }
+
+    // Replace a child node. Return true if |original| is a child
+    // node and it is replaced; otherwise, return false.
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement) = 0;
+
+    // For traversing a tree in no particular order, but using
+    // heap memory.
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const = 0;
+
+  protected:
+    TSourceLoc mLine;
+};
+
+//
+// This is just to help yacc.
+//
+struct TIntermNodePair
+{
+    TIntermNode *node1;
+    TIntermNode *node2;
+};
+
+//
+// Intermediate class for nodes that have a type.
+//
+class TIntermTyped : public TIntermNode
+{
+  public:
+    TIntermTyped(const TType &t) : mType(t)  { }
+    virtual TIntermTyped *getAsTyped() { return this; }
+
+    virtual bool hasSideEffects() const = 0;
+
+    void setType(const TType &t) { mType = t; }
+    const TType &getType() const { return mType; }
+    TType *getTypePointer() { return &mType; }
+
+    TBasicType getBasicType() const { return mType.getBasicType(); }
+    TQualifier getQualifier() const { return mType.getQualifier(); }
+    TPrecision getPrecision() const { return mType.getPrecision(); }
+    int getCols() const { return mType.getCols(); }
+    int getRows() const { return mType.getRows(); }
+    int getNominalSize() const { return mType.getNominalSize(); }
+    int getSecondarySize() const { return mType.getSecondarySize(); }
+
+    bool isInterfaceBlock() const { return mType.isInterfaceBlock(); }
+    bool isMatrix() const { return mType.isMatrix(); }
+    bool isArray()  const { return mType.isArray(); }
+    bool isVector() const { return mType.isVector(); }
+    bool isScalar() const { return mType.isScalar(); }
+    bool isScalarInt() const { return mType.isScalarInt(); }
+    const char *getBasicString() const { return mType.getBasicString(); }
+    const char *getQualifierString() const { return mType.getQualifierString(); }
+    TString getCompleteString() const { return mType.getCompleteString(); }
+
+    int getArraySize() const { return mType.getArraySize(); }
+
+  protected:
+    TType mType;
+};
+
+//
+// Handle for, do-while, and while loops.
+//
+enum TLoopType
+{
+    ELoopFor,
+    ELoopWhile,
+    ELoopDoWhile
+};
+
+class TIntermLoop : public TIntermNode
+{
+  public:
+    TIntermLoop(TLoopType type,
+                TIntermNode *init, TIntermTyped *cond, TIntermTyped *expr,
+                TIntermNode *body)
+        : mType(type),
+          mInit(init),
+          mCond(cond),
+          mExpr(expr),
+          mBody(body),
+          mUnrollFlag(false) { }
+
+    virtual TIntermLoop *getAsLoopNode() { return this; }
+    virtual void traverse(TIntermTraverser *);
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement);
+
+    TLoopType getType() const { return mType; }
+    TIntermNode *getInit() { return mInit; }
+    TIntermTyped *getCondition() { return mCond; }
+    TIntermTyped *getExpression() { return mExpr; }
+    TIntermNode *getBody() { return mBody; }
+
+    void setUnrollFlag(bool flag) { mUnrollFlag = flag; }
+    bool getUnrollFlag() const { return mUnrollFlag; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const;
+
+  protected:
+    TLoopType mType;
+    TIntermNode *mInit;  // for-loop initialization
+    TIntermTyped *mCond; // loop exit condition
+    TIntermTyped *mExpr; // for-loop expression
+    TIntermNode *mBody;  // loop body
+
+    bool mUnrollFlag; // Whether the loop should be unrolled or not.
+};
+
+//
+// Handle break, continue, return, and kill.
+//
+class TIntermBranch : public TIntermNode
+{
+  public:
+    TIntermBranch(TOperator op, TIntermTyped *e)
+        : mFlowOp(op),
+          mExpression(e) { }
+
+    virtual void traverse(TIntermTraverser *);
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement);
+
+    TOperator getFlowOp() { return mFlowOp; }
+    TIntermTyped* getExpression() { return mExpression; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const;
+
+protected:
+    TOperator mFlowOp;
+    TIntermTyped *mExpression;  // non-zero except for "return exp;" statements
+};
+
+//
+// Nodes that correspond to symbols or constants in the source code.
+//
+class TIntermSymbol : public TIntermTyped
+{
+  public:
+    // if symbol is initialized as symbol(sym), the memory comes from the poolallocator of sym.
+    // If sym comes from per process globalpoolallocator, then it causes increased memory usage
+    // per compile it is essential to use "symbol = sym" to assign to symbol
+    TIntermSymbol(int id, const TString &symbol, const TType &type)
+        : TIntermTyped(type),
+          mId(id)
+    {
+        mSymbol = symbol;
+    }
+
+    virtual bool hasSideEffects() const { return false; }
+
+    int getId() const { return mId; }
+    const TString &getSymbol() const { return mSymbol; }
+
+    void setId(int newId) { mId = newId; }
+
+    virtual void traverse(TIntermTraverser *);
+    virtual TIntermSymbol *getAsSymbolNode() { return this; }
+    virtual bool replaceChildNode(TIntermNode *, TIntermNode *) { return false; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const {}
+
+  protected:
+    int mId;
+    TString mSymbol;
+};
+
+// A Raw node stores raw code, that the translator will insert verbatim
+// into the output stream. Useful for transformation operations that make
+// complex code that might not fit naturally into the GLSL model.
+class TIntermRaw : public TIntermTyped
+{
+  public:
+    TIntermRaw(const TType &type, const TString &rawText)
+        : TIntermTyped(type),
+          mRawText(rawText) { }
+
+    virtual bool hasSideEffects() const { return false; }
+
+    TString getRawText() const { return mRawText; }
+
+    virtual void traverse(TIntermTraverser *);
+
+    virtual TIntermRaw *getAsRawNode() { return this; }
+    virtual bool replaceChildNode(TIntermNode *, TIntermNode *) { return false; }
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const {}
+
+  protected:
+    TString mRawText;
+};
+
+class TIntermConstantUnion : public TIntermTyped
+{
+  public:
+    TIntermConstantUnion(ConstantUnion *unionPointer, const TType &type)
+        : TIntermTyped(type),
+          mUnionArrayPointer(unionPointer) { }
+
+    virtual bool hasSideEffects() const { return false; }
+
+    ConstantUnion *getUnionArrayPointer() const { return mUnionArrayPointer; }
+
+    int getIConst(size_t index) const
+    {
+        return mUnionArrayPointer ? mUnionArrayPointer[index].getIConst() : 0;
+    }
+    unsigned int getUConst(size_t index) const
+    {
+        return mUnionArrayPointer ? mUnionArrayPointer[index].getUConst() : 0;
+    }
+    float getFConst(size_t index) const
+    {
+        return mUnionArrayPointer ? mUnionArrayPointer[index].getFConst() : 0.0f;
+    }
+    bool getBConst(size_t index) const
+    {
+        return mUnionArrayPointer ? mUnionArrayPointer[index].getBConst() : false;
+    }
+
+    virtual TIntermConstantUnion *getAsConstantUnion()  { return this; }
+    virtual void traverse(TIntermTraverser *);
+    virtual bool replaceChildNode(TIntermNode *, TIntermNode *) { return false; }
+
+    TIntermTyped *fold(TOperator, TIntermTyped *, TInfoSink &);
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const {}
+
+  protected:
+    ConstantUnion *mUnionArrayPointer;
+};
+
+//
+// Intermediate class for node types that hold operators.
+//
+class TIntermOperator : public TIntermTyped
+{
+  public:
+    TOperator getOp() const { return mOp; }
+    void setOp(TOperator op) { mOp = op; }
+
+    bool isAssignment() const;
+    bool isConstructor() const;
+
+    virtual bool hasSideEffects() const { return isAssignment(); }
+
+  protected:
+    TIntermOperator(TOperator op)
+        : TIntermTyped(TType(EbtFloat, EbpUndefined)),
+          mOp(op) {}
+    TIntermOperator(TOperator op, const TType &type)
+        : TIntermTyped(type),
+          mOp(op) {}
+
+    TOperator mOp;
+};
+
+//
+// Nodes for all the basic binary math operators.
+//
+class TIntermBinary : public TIntermOperator
+{
+  public:
+    TIntermBinary(TOperator op)
+        : TIntermOperator(op),
+          mAddIndexClamp(false) {}
+
+    virtual TIntermBinary *getAsBinaryNode() { return this; }
+    virtual void traverse(TIntermTraverser *);
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement);
+
+    virtual bool hasSideEffects() const
+    {
+        return isAssignment() || mLeft->hasSideEffects() || mRight->hasSideEffects();
+    }
+
+    void setLeft(TIntermTyped *node) { mLeft = node; }
+    void setRight(TIntermTyped *node) { mRight = node; }
+    TIntermTyped *getLeft() const { return mLeft; }
+    TIntermTyped *getRight() const { return mRight; }
+    bool promote(TInfoSink &);
+
+    void setAddIndexClamp() { mAddIndexClamp = true; }
+    bool getAddIndexClamp() { return mAddIndexClamp; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const;
+
+  protected:
+    TIntermTyped* mLeft;
+    TIntermTyped* mRight;
+
+    // If set to true, wrap any EOpIndexIndirect with a clamp to bounds.
+    bool mAddIndexClamp;
+};
+
+//
+// Nodes for unary math operators.
+//
+class TIntermUnary : public TIntermOperator
+{
+  public:
+    TIntermUnary(TOperator op, const TType &type)
+        : TIntermOperator(op, type),
+          mOperand(NULL),
+          mUseEmulatedFunction(false) {}
+    TIntermUnary(TOperator op)
+        : TIntermOperator(op),
+          mOperand(NULL),
+          mUseEmulatedFunction(false) {}
+
+    virtual void traverse(TIntermTraverser *);
+    virtual TIntermUnary *getAsUnaryNode() { return this; }
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement);
+
+    virtual bool hasSideEffects() const
+    {
+        return isAssignment() || mOperand->hasSideEffects();
+    }
+
+    void setOperand(TIntermTyped *operand) { mOperand = operand; }
+    TIntermTyped *getOperand() { return mOperand; }
+    bool promote(TInfoSink &);
+
+    void setUseEmulatedFunction() { mUseEmulatedFunction = true; }
+    bool getUseEmulatedFunction() { return mUseEmulatedFunction; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const;
+
+  protected:
+    TIntermTyped *mOperand;
+
+    // If set to true, replace the built-in function call with an emulated one
+    // to work around driver bugs.
+    bool mUseEmulatedFunction;
+};
+
+typedef TVector<TIntermNode *> TIntermSequence;
+typedef TVector<int> TQualifierList;
+
+//
+// Nodes that operate on an arbitrary sized set of children.
+//
+class TIntermAggregate : public TIntermOperator
+{
+  public:
+    TIntermAggregate()
+        : TIntermOperator(EOpNull),
+          mUserDefined(false),
+          mUseEmulatedFunction(false) { }
+    TIntermAggregate(TOperator op)
+        : TIntermOperator(op),
+          mUseEmulatedFunction(false) { }
+    ~TIntermAggregate() { }
+
+    virtual TIntermAggregate *getAsAggregate() { return this; }
+    virtual void traverse(TIntermTraverser *);
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement);
+
+    // Conservatively assume function calls and other aggregate operators have side-effects
+    virtual bool hasSideEffects() const { return true; }
+
+    TIntermSequence *getSequence() { return &mSequence; }
+
+    void setName(const TString &name) { mName = name; }
+    const TString &getName() const { return mName; }
+
+    void setUserDefined() { mUserDefined = true; }
+    bool isUserDefined() const { return mUserDefined; }
+
+    void setOptimize(bool optimize) { mOptimize = optimize; }
+    bool getOptimize() const { return mOptimize; }
+    void setDebug(bool debug) { mDebug = debug; }
+    bool getDebug() const { return mDebug; }
+
+    void setUseEmulatedFunction() { mUseEmulatedFunction = true; }
+    bool getUseEmulatedFunction() { return mUseEmulatedFunction; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const;
+
+  protected:
+    TIntermAggregate(const TIntermAggregate &); // disallow copy constructor
+    TIntermAggregate &operator=(const TIntermAggregate &); // disallow assignment operator
+    TIntermSequence mSequence;
+    TString mName;
+    bool mUserDefined; // used for user defined function names
+
+    bool mOptimize;
+    bool mDebug;
+
+    // If set to true, replace the built-in function call with an emulated one
+    // to work around driver bugs.
+    bool mUseEmulatedFunction;
+};
+
+//
+// For if tests.  Simplified since there is no switch statement.
+//
+class TIntermSelection : public TIntermTyped
+{
+  public:
+    TIntermSelection(TIntermTyped *cond, TIntermNode *trueB, TIntermNode *falseB)
+        : TIntermTyped(TType(EbtVoid, EbpUndefined)),
+          mCondition(cond),
+          mTrueBlock(trueB),
+          mFalseBlock(falseB) {}
+    TIntermSelection(TIntermTyped *cond, TIntermNode *trueB, TIntermNode *falseB,
+                     const TType &type)
+        : TIntermTyped(type),
+          mCondition(cond),
+          mTrueBlock(trueB),
+          mFalseBlock(falseB) {}
+
+    virtual void traverse(TIntermTraverser *);
+    virtual bool replaceChildNode(
+        TIntermNode *original, TIntermNode *replacement);
+
+    // Conservatively assume selections have side-effects
+    virtual bool hasSideEffects() const { return true; }
+
+    bool usesTernaryOperator() const { return getBasicType() != EbtVoid; }
+    TIntermNode *getCondition() const { return mCondition; }
+    TIntermNode *getTrueBlock() const { return mTrueBlock; }
+    TIntermNode *getFalseBlock() const { return mFalseBlock; }
+    TIntermSelection *getAsSelectionNode() { return this; }
+
+    virtual void enqueueChildren(std::queue<TIntermNode *> *nodeQueue) const;
+
+protected:
+    TIntermTyped *mCondition;
+    TIntermNode *mTrueBlock;
+    TIntermNode *mFalseBlock;
+};
+
+enum Visit
+{
+    PreVisit,
+    InVisit,
+    PostVisit
+};
+
+//
+// For traversing the tree.  User should derive from this,
+// put their traversal specific data in it, and then pass
+// it to a Traverse method.
+//
+// When using this, just fill in the methods for nodes you want visited.
+// Return false from a pre-visit to skip visiting that node's subtree.
+//
+class TIntermTraverser
+{
+  public:
+    POOL_ALLOCATOR_NEW_DELETE();
+    // TODO(zmo): remove default values.
+    TIntermTraverser(bool preVisit = true, bool inVisit = false, bool postVisit = false,
+                     bool rightToLeft = false)
+        : preVisit(preVisit),
+          inVisit(inVisit),
+          postVisit(postVisit),
+          rightToLeft(rightToLeft),
+          mDepth(0),
+          mMaxDepth(0) {}
+    virtual ~TIntermTraverser() {}
+
+    virtual void visitSymbol(TIntermSymbol *) {}
+    virtual void visitRaw(TIntermRaw *) {}
+    virtual void visitConstantUnion(TIntermConstantUnion *) {}
+    virtual bool visitBinary(Visit, TIntermBinary *) { return true; }
+    virtual bool visitUnary(Visit, TIntermUnary *) { return true; }
+    virtual bool visitSelection(Visit, TIntermSelection *) { return true; }
+    virtual bool visitAggregate(Visit, TIntermAggregate *) { return true; }
+    virtual bool visitLoop(Visit, TIntermLoop *) { return true; }
+    virtual bool visitBranch(Visit, TIntermBranch *) { return true; }
+
+    int getMaxDepth() const { return mMaxDepth; }
+
+    void incrementDepth(TIntermNode *current)
+    {
+        mDepth++;
+        mMaxDepth = std::max(mMaxDepth, mDepth);
+        mPath.push_back(current);
+    }
+
+    void decrementDepth()
+    {
+        mDepth--;
+        mPath.pop_back();
+    }
+
+    TIntermNode *getParentNode()
+    {
+        return mPath.size() == 0 ? NULL : mPath.back();
+    }
+
+    // Return the original name if hash function pointer is NULL;
+    // otherwise return the hashed name.
+    static TString hash(const TString& name, ShHashFunction64 hashFunction);
+
+    const bool preVisit;
+    const bool inVisit;
+    const bool postVisit;
+    const bool rightToLeft;
+
+  protected:
+    int mDepth;
+    int mMaxDepth;
+
+    // All the nodes from root to the current node's parent during traversing.
+    TVector<TIntermNode *> mPath;
+};
+
+//
+// For traversing the tree, and computing max depth.
+// Takes a maximum depth limit to prevent stack overflow.
+//
+class TMaxDepthTraverser : public TIntermTraverser
+{
+  public:
+    POOL_ALLOCATOR_NEW_DELETE();
+    TMaxDepthTraverser(int depthLimit)
+        : TIntermTraverser(true, true, false, false),
+          mDepthLimit(depthLimit) { }
+
+    virtual bool visitBinary(Visit, TIntermBinary *) { return depthCheck(); }
+    virtual bool visitUnary(Visit, TIntermUnary *) { return depthCheck(); }
+    virtual bool visitSelection(Visit, TIntermSelection *) { return depthCheck(); }
+    virtual bool visitAggregate(Visit, TIntermAggregate *) { return depthCheck(); }
+    virtual bool visitLoop(Visit, TIntermLoop *) { return depthCheck(); }
+    virtual bool visitBranch(Visit, TIntermBranch *) { return depthCheck(); }
+
+protected:
+    bool depthCheck() const { return mMaxDepth < mDepthLimit; }
+
+    int mDepthLimit;
+};
+
+#endif  // COMPILER_TRANSLATOR_INTERMEDIATE_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/IntermTraverse.cpp b/src/3rdparty/angle/src/compiler/translator/IntermTraverse.cpp
index 554b83409a..72b2033fb3 100644
--- a/src/3rdparty/angle/src/compiler/translator/IntermTraverse.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/IntermTraverse.cpp
@@ -4,7 +4,7 @@
 // found in the LICENSE file.
 //
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 //
 // Traverse the intermediate representation tree, and
@@ -45,7 +45,7 @@ void TIntermBinary::traverse(TIntermTraverser *it)
     //
     if (it->preVisit)
         visit = it->visitBinary(PreVisit, this);
-    
+
     //
     // Visit the children, in the right order.
     //
@@ -53,27 +53,27 @@ void TIntermBinary::traverse(TIntermTraverser *it)
     {
         it->incrementDepth(this);
 
-        if (it->rightToLeft) 
+        if (it->rightToLeft)
         {
-            if (right)
-                right->traverse(it);
-            
+            if (mRight)
+                mRight->traverse(it);
+
             if (it->inVisit)
                 visit = it->visitBinary(InVisit, this);
 
-            if (visit && left)
-                left->traverse(it);
+            if (visit && mLeft)
+                mLeft->traverse(it);
         }
         else
         {
-            if (left)
-                left->traverse(it);
-            
+            if (mLeft)
+                mLeft->traverse(it);
+
             if (it->inVisit)
                 visit = it->visitBinary(InVisit, this);
 
-            if (visit && right)
-                right->traverse(it);
+            if (visit && mRight)
+                mRight->traverse(it);
         }
 
         it->decrementDepth();
@@ -99,10 +99,10 @@ void TIntermUnary::traverse(TIntermTraverser *it)
 
     if (visit) {
         it->incrementDepth(this);
-        operand->traverse(it);
+        mOperand->traverse(it);
         it->decrementDepth();
     }
-    
+
     if (visit && it->postVisit)
         it->visitUnary(PostVisit, this);
 }
@@ -113,41 +113,43 @@ void TIntermUnary::traverse(TIntermTraverser *it)
 void TIntermAggregate::traverse(TIntermTraverser *it)
 {
     bool visit = true;
-    
+
     if (it->preVisit)
         visit = it->visitAggregate(PreVisit, this);
-    
+
     if (visit)
     {
         it->incrementDepth(this);
 
         if (it->rightToLeft)
         {
-            for (TIntermSequence::reverse_iterator sit = sequence.rbegin(); sit != sequence.rend(); sit++)
+            for (TIntermSequence::reverse_iterator sit = mSequence.rbegin();
+                 sit != mSequence.rend(); sit++)
             {
                 (*sit)->traverse(it);
 
                 if (visit && it->inVisit)
                 {
-                    if (*sit != sequence.front())
+                    if (*sit != mSequence.front())
                         visit = it->visitAggregate(InVisit, this);
                 }
             }
         }
         else
         {
-            for (TIntermSequence::iterator sit = sequence.begin(); sit != sequence.end(); sit++)
+            for (TIntermSequence::iterator sit = mSequence.begin();
+                 sit != mSequence.end(); sit++)
             {
                 (*sit)->traverse(it);
 
                 if (visit && it->inVisit)
                 {
-                    if (*sit != sequence.back())
+                    if (*sit != mSequence.back())
                         visit = it->visitAggregate(InVisit, this);
                 }
             }
         }
-        
+
         it->decrementDepth();
     }
 
@@ -164,21 +166,25 @@ void TIntermSelection::traverse(TIntermTraverser *it)
 
     if (it->preVisit)
         visit = it->visitSelection(PreVisit, this);
-    
-    if (visit) {
+
+    if (visit)
+    {
         it->incrementDepth(this);
-        if (it->rightToLeft) {
-            if (falseBlock)
-                falseBlock->traverse(it);
-            if (trueBlock)
-                trueBlock->traverse(it);
-            condition->traverse(it);
-        } else {
-            condition->traverse(it);
-            if (trueBlock)
-                trueBlock->traverse(it);
-            if (falseBlock)
-                falseBlock->traverse(it);
+        if (it->rightToLeft)
+        {
+            if (mFalseBlock)
+                mFalseBlock->traverse(it);
+            if (mTrueBlock)
+                mTrueBlock->traverse(it);
+            mCondition->traverse(it);
+        }
+        else
+        {
+            mCondition->traverse(it);
+            if (mTrueBlock)
+                mTrueBlock->traverse(it);
+            if (mFalseBlock)
+                mFalseBlock->traverse(it);
         }
         it->decrementDepth();
     }
@@ -196,38 +202,38 @@ void TIntermLoop::traverse(TIntermTraverser *it)
 
     if (it->preVisit)
         visit = it->visitLoop(PreVisit, this);
-    
+
     if (visit)
     {
         it->incrementDepth(this);
 
         if (it->rightToLeft)
         {
-            if (expr)
-                expr->traverse(it);
+            if (mExpr)
+                mExpr->traverse(it);
 
-            if (body)
-                body->traverse(it);
+            if (mBody)
+                mBody->traverse(it);
 
-            if (cond)
-                cond->traverse(it);
+            if (mCond)
+                mCond->traverse(it);
 
-            if (init)
-                init->traverse(it);
+            if (mInit)
+                mInit->traverse(it);
         }
         else
         {
-            if (init)
-                init->traverse(it);
+            if (mInit)
+                mInit->traverse(it);
 
-            if (cond)
-                cond->traverse(it);
+            if (mCond)
+                mCond->traverse(it);
 
-            if (body)
-                body->traverse(it);
+            if (mBody)
+                mBody->traverse(it);
 
-            if (expr)
-                expr->traverse(it);
+            if (mExpr)
+                mExpr->traverse(it);
         }
 
         it->decrementDepth();
@@ -246,10 +252,10 @@ void TIntermBranch::traverse(TIntermTraverser *it)
 
     if (it->preVisit)
         visit = it->visitBranch(PreVisit, this);
-    
-    if (visit && expression) {
+
+    if (visit && mExpression) {
         it->incrementDepth(this);
-        expression->traverse(it);
+        mExpression->traverse(it);
         it->decrementDepth();
     }
 
@@ -257,3 +263,7 @@ void TIntermBranch::traverse(TIntermTraverser *it)
         it->visitBranch(PostVisit, this);
 }
 
+void TIntermRaw::traverse(TIntermTraverser *it)
+{
+    it->visitRaw(this);
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/Intermediate.cpp b/src/3rdparty/angle/src/compiler/translator/Intermediate.cpp
index 777cab5458..ef4f83307c 100644
--- a/src/3rdparty/angle/src/compiler/translator/Intermediate.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/Intermediate.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -12,113 +12,9 @@
 #include <limits.h>
 #include <algorithm>
 
-#include "compiler/translator/HashNames.h"
-#include "compiler/translator/localintermediate.h"
-#include "compiler/translator/QualifierAlive.h"
+#include "compiler/translator/Intermediate.h"
 #include "compiler/translator/RemoveTree.h"
-
-bool CompareStructure(const TType& leftNodeType, ConstantUnion* rightUnionArray, ConstantUnion* leftUnionArray);
-
-static TPrecision GetHigherPrecision(TPrecision left, TPrecision right)
-{
-    return left > right ? left : right;
-}
-
-const char* getOperatorString(TOperator op)
-{
-    switch (op) {
-      case EOpInitialize: return "=";
-      case EOpAssign: return "=";
-      case EOpAddAssign: return "+=";
-      case EOpSubAssign: return "-=";
-      case EOpDivAssign: return "/=";
-
-      // Fall-through.
-      case EOpMulAssign: 
-      case EOpVectorTimesMatrixAssign:
-      case EOpVectorTimesScalarAssign:
-      case EOpMatrixTimesScalarAssign:
-      case EOpMatrixTimesMatrixAssign: return "*=";
-
-      // Fall-through.
-      case EOpIndexDirect:
-      case EOpIndexIndirect: return "[]";
-
-      case EOpIndexDirectStruct: return ".";
-      case EOpVectorSwizzle: return ".";
-      case EOpAdd: return "+";
-      case EOpSub: return "-";
-      case EOpMul: return "*";
-      case EOpDiv: return "/";
-      case EOpMod: UNIMPLEMENTED(); break;
-      case EOpEqual: return "==";
-      case EOpNotEqual: return "!=";
-      case EOpLessThan: return "<";
-      case EOpGreaterThan: return ">";
-      case EOpLessThanEqual: return "<=";
-      case EOpGreaterThanEqual: return ">=";
-
-      // Fall-through.
-      case EOpVectorTimesScalar:
-      case EOpVectorTimesMatrix:
-      case EOpMatrixTimesVector:
-      case EOpMatrixTimesScalar:
-      case EOpMatrixTimesMatrix: return "*";
-
-      case EOpLogicalOr: return "||";
-      case EOpLogicalXor: return "^^";
-      case EOpLogicalAnd: return "&&";
-      case EOpNegative: return "-";
-      case EOpVectorLogicalNot: return "not";
-      case EOpLogicalNot: return "!";
-      case EOpPostIncrement: return "++";
-      case EOpPostDecrement: return "--";
-      case EOpPreIncrement: return "++";
-      case EOpPreDecrement: return "--";
-
-      // Fall-through.
-      case EOpConvIntToBool:
-      case EOpConvFloatToBool: return "bool";
- 
-      // Fall-through.
-      case EOpConvBoolToFloat:
-      case EOpConvIntToFloat: return "float";
- 
-      // Fall-through.
-      case EOpConvFloatToInt:
-      case EOpConvBoolToInt: return "int";
-
-      case EOpRadians: return "radians";
-      case EOpDegrees: return "degrees";
-      case EOpSin: return "sin";
-      case EOpCos: return "cos";
-      case EOpTan: return "tan";
-      case EOpAsin: return "asin";
-      case EOpAcos: return "acos";
-      case EOpAtan: return "atan";
-      case EOpExp: return "exp";
-      case EOpLog: return "log";
-      case EOpExp2: return "exp2";
-      case EOpLog2: return "log2";
-      case EOpSqrt: return "sqrt";
-      case EOpInverseSqrt: return "inversesqrt";
-      case EOpAbs: return "abs";
-      case EOpSign: return "sign";
-      case EOpFloor: return "floor";
-      case EOpCeil: return "ceil";
-      case EOpFract: return "fract";
-      case EOpLength: return "length";
-      case EOpNormalize: return "normalize";
-      case EOpDFdx: return "dFdx";
-      case EOpDFdy: return "dFdy";
-      case EOpFwidth: return "fwidth";
-      case EOpAny: return "any";
-      case EOpAll: return "all";
-
-      default: break;
-    }
-    return "";
-}
+#include "compiler/translator/SymbolTable.h"
 
 ////////////////////////////////////////////////////////////////////////////
 //
@@ -133,9 +29,10 @@ const char* getOperatorString(TOperator op)
 //
 // Returns the added node.
 //
-TIntermSymbol* TIntermediate::addSymbol(int id, const TString& name, const TType& type, const TSourceLoc& line)
+TIntermSymbol *TIntermediate::addSymbol(
+    int id, const TString &name, const TType &type, const TSourceLoc &line)
 {
-    TIntermSymbol* node = new TIntermSymbol(id, name, type);
+    TIntermSymbol *node = new TIntermSymbol(id, name, type);
     node->setLine(line);
 
     return node;
@@ -146,77 +43,71 @@ TIntermSymbol* TIntermediate::addSymbol(int id, const TString& name, const TType
 //
 // Returns the added node.
 //
-TIntermTyped* TIntermediate::addBinaryMath(TOperator op, TIntermTyped* left, TIntermTyped* right, const TSourceLoc& line, TSymbolTable& symbolTable)
+TIntermTyped *TIntermediate::addBinaryMath(
+    TOperator op, TIntermTyped *left, TIntermTyped *right, const TSourceLoc &line)
 {
-    switch (op) {
-        case EOpEqual:
-        case EOpNotEqual:
-            if (left->isArray())
-                return 0;
-            break;
-        case EOpLessThan:
-        case EOpGreaterThan:
-        case EOpLessThanEqual:
-        case EOpGreaterThanEqual:
-            if (left->isMatrix() || left->isArray() || left->isVector() || left->getBasicType() == EbtStruct) {
-                return 0;
-            }
-            break;
-        case EOpLogicalOr:
-        case EOpLogicalXor:
-        case EOpLogicalAnd:
-            if (left->getBasicType() != EbtBool || left->isMatrix() || left->isArray() || left->isVector()) {
-                return 0;
-            }
-            break;
-        case EOpAdd:
-        case EOpSub:
-        case EOpDiv:
-        case EOpMul:
-            if (left->getBasicType() == EbtStruct || left->getBasicType() == EbtBool)
-                return 0;
-        default: break;
+    switch (op)
+    {
+      case EOpEqual:
+      case EOpNotEqual:
+        if (left->isArray())
+            return NULL;
+        break;
+      case EOpLessThan:
+      case EOpGreaterThan:
+      case EOpLessThanEqual:
+      case EOpGreaterThanEqual:
+        if (left->isMatrix() || left->isArray() || left->isVector() ||
+            left->getBasicType() == EbtStruct)
+        {
+            return NULL;
+        }
+        break;
+      case EOpLogicalOr:
+      case EOpLogicalXor:
+      case EOpLogicalAnd:
+        if (left->getBasicType() != EbtBool ||
+            left->isMatrix() || left->isArray() || left->isVector())
+        {
+            return NULL;
+        }
+        break;
+      case EOpAdd:
+      case EOpSub:
+      case EOpDiv:
+      case EOpMul:
+        if (left->getBasicType() == EbtStruct || left->getBasicType() == EbtBool)
+            return NULL;
+      default:
+        break;
     }
 
-    //
-    // First try converting the children to compatible types.
-    //
-    if (left->getType().getStruct() && right->getType().getStruct()) {
-        if (left->getType() != right->getType())
-            return 0;
-    } else {
-        TIntermTyped* child = addConversion(op, left->getType(), right);
-        if (child)
-            right = child;
-        else {
-            child = addConversion(op, right->getType(), left);
-            if (child)
-                left = child;
-            else
-                return 0;
-        }
+    if (left->getBasicType() != right->getBasicType())
+    {
+        return NULL;
     }
 
     //
     // Need a new node holding things together then.  Make
     // one and promote it to the right type.
     //
-    TIntermBinary* node = new TIntermBinary(op);
+    TIntermBinary *node = new TIntermBinary(op);
     node->setLine(line);
 
     node->setLeft(left);
     node->setRight(right);
-    if (!node->promote(infoSink))
-        return 0;
+    if (!node->promote(mInfoSink))
+        return NULL;
 
     //
     // See if we can fold constants.
     //
-    TIntermTyped* typedReturnNode = 0;
     TIntermConstantUnion *leftTempConstant = left->getAsConstantUnion();
     TIntermConstantUnion *rightTempConstant = right->getAsConstantUnion();
-    if (leftTempConstant && rightTempConstant) {
-        typedReturnNode = leftTempConstant->fold(node->getOp(), rightTempConstant, infoSink);
+    if (leftTempConstant && rightTempConstant)
+    {
+        TIntermTyped *typedReturnNode =
+            leftTempConstant->fold(node->getOp(), rightTempConstant, mInfoSink);
 
         if (typedReturnNode)
             return typedReturnNode;
@@ -230,23 +121,24 @@ TIntermTyped* TIntermediate::addBinaryMath(TOperator op, TIntermTyped* left, TIn
 //
 // Returns the added node.
 //
-TIntermTyped* TIntermediate::addAssign(TOperator op, TIntermTyped* left, TIntermTyped* right, const TSourceLoc& line)
+TIntermTyped *TIntermediate::addAssign(
+    TOperator op, TIntermTyped *left, TIntermTyped *right, const TSourceLoc &line)
 {
-    //
-    // Like adding binary math, except the conversion can only go
-    // from right to left.
-    //
-    TIntermBinary* node = new TIntermBinary(op);
-    node->setLine(line);
+    if (left->getType().getStruct() || right->getType().getStruct())
+    {
+        if (left->getType() != right->getType())
+        {
+            return NULL;
+        }
+    }
 
-    TIntermTyped* child = addConversion(op, left->getType(), right);
-    if (child == 0)
-        return 0;
+    TIntermBinary *node = new TIntermBinary(op);
+    node->setLine(line);
 
     node->setLeft(left);
-    node->setRight(child);
-    if (! node->promote(infoSink))
-        return 0;
+    node->setRight(right);
+    if (!node->promote(mInfoSink))
+        return NULL;
 
     return node;
 }
@@ -258,9 +150,10 @@ TIntermTyped* TIntermediate::addAssign(TOperator op, TIntermTyped* left, TInterm
 // Returns the added node.
 // The caller should set the type of the returned node.
 //
-TIntermTyped* TIntermediate::addIndex(TOperator op, TIntermTyped* base, TIntermTyped* index, const TSourceLoc& line)
+TIntermTyped *TIntermediate::addIndex(
+    TOperator op, TIntermTyped *base, TIntermTyped *index, const TSourceLoc &line)
 {
-    TIntermBinary* node = new TIntermBinary(op);
+    TIntermBinary *node = new TIntermBinary(op);
     node->setLine(line);
     node->setLeft(base);
     node->setRight(index);
@@ -275,65 +168,43 @@ TIntermTyped* TIntermediate::addIndex(TOperator op, TIntermTyped* base, TIntermT
 //
 // Returns the added node.
 //
-TIntermTyped* TIntermediate::addUnaryMath(TOperator op, TIntermNode* childNode, const TSourceLoc& line, TSymbolTable& symbolTable)
+TIntermTyped *TIntermediate::addUnaryMath(
+    TOperator op, TIntermNode *childNode, const TSourceLoc &line)
 {
-    TIntermUnary* node;
-    TIntermTyped* child = childNode->getAsTyped();
-
-    if (child == 0) {
-        infoSink.info.message(EPrefixInternalError, line, "Bad type in AddUnaryMath");
-        return 0;
-    }
-
-    switch (op) {
-        case EOpLogicalNot:
-            if (child->getType().getBasicType() != EbtBool || child->getType().isMatrix() || child->getType().isArray() || child->getType().isVector()) {
-                return 0;
-            }
-            break;
-
-        case EOpPostIncrement:
-        case EOpPreIncrement:
-        case EOpPostDecrement:
-        case EOpPreDecrement:
-        case EOpNegative:
-            if (child->getType().getBasicType() == EbtStruct || child->getType().isArray())
-                return 0;
-        default: break;
-    }
+    TIntermUnary *node;
+    TIntermTyped *child = childNode->getAsTyped();
 
-    //
-    // Do we need to promote the operand?
-    //
-    // Note: Implicit promotions were removed from the language.
-    //
-    TBasicType newType = EbtVoid;
-    switch (op) {
-        case EOpConstructInt:   newType = EbtInt;   break;
-        case EOpConstructBool:  newType = EbtBool;  break;
-        case EOpConstructFloat: newType = EbtFloat; break;
-        default: break;
-    }
-
-    if (newType != EbtVoid) {
-        child = addConversion(op, TType(newType, child->getPrecision(), EvqTemporary,
-            child->getNominalSize(),
-            child->isMatrix(),
-            child->isArray()),
-            child);
-        if (child == 0)
-            return 0;
+    if (child == NULL)
+    {
+        mInfoSink.info.message(EPrefixInternalError, line,
+                               "Bad type in AddUnaryMath");
+        return NULL;
     }
 
-    //
-    // For constructors, we are now done, it's all in the conversion.
-    //
-    switch (op) {
-        case EOpConstructInt:
-        case EOpConstructBool:
-        case EOpConstructFloat:
-            return child;
-        default: break;
+    switch (op)
+    {
+      case EOpLogicalNot:
+        if (child->getType().getBasicType() != EbtBool ||
+            child->getType().isMatrix() ||
+            child->getType().isArray() ||
+            child->getType().isVector())
+        {
+            return NULL;
+        }
+        break;
+
+      case EOpPostIncrement:
+      case EOpPreIncrement:
+      case EOpPostDecrement:
+      case EOpPreDecrement:
+      case EOpNegative:
+        if (child->getType().getBasicType() == EbtStruct ||
+            child->getType().isArray())
+        {
+            return NULL;
+        }
+      default:
+        break;
     }
 
     TIntermConstantUnion *childTempConstant = 0;
@@ -347,11 +218,12 @@ TIntermTyped* TIntermediate::addUnaryMath(TOperator op, TIntermNode* childNode,
     node->setLine(line);
     node->setOperand(child);
 
-    if (! node->promote(infoSink))
+    if (!node->promote(mInfoSink))
         return 0;
 
-    if (childTempConstant)  {
-        TIntermTyped* newChild = childTempConstant->fold(op, 0, infoSink);
+    if (childTempConstant)
+    {
+        TIntermTyped *newChild = childTempConstant->fold(op, 0, mInfoSink);
 
         if (newChild)
             return newChild;
@@ -370,24 +242,30 @@ TIntermTyped* TIntermediate::addUnaryMath(TOperator op, TIntermNode* childNode,
 // Returns an aggregate node, which could be the one passed in if
 // it was already an aggregate but no operator was set.
 //
-TIntermAggregate* TIntermediate::setAggregateOperator(TIntermNode* node, TOperator op, const TSourceLoc& line)
+TIntermAggregate *TIntermediate::setAggregateOperator(
+    TIntermNode *node, TOperator op, const TSourceLoc &line)
 {
-    TIntermAggregate* aggNode;
+    TIntermAggregate *aggNode;
 
     //
     // Make sure we have an aggregate.  If not turn it into one.
     //
-    if (node) {
+    if (node)
+    {
         aggNode = node->getAsAggregate();
-        if (aggNode == 0 || aggNode->getOp() != EOpNull) {
+        if (aggNode == NULL || aggNode->getOp() != EOpNull)
+        {
             //
             // Make an aggregate containing this node.
             //
             aggNode = new TIntermAggregate();
-            aggNode->getSequence().push_back(node);
+            aggNode->getSequence()->push_back(node);
         }
-    } else
+    }
+    else
+    {
         aggNode = new TIntermAggregate();
+    }
 
     //
     // Set the operator.
@@ -399,148 +277,30 @@ TIntermAggregate* TIntermediate::setAggregateOperator(TIntermNode* node, TOperat
 }
 
 //
-// Convert one type to another.
-//
-// Returns the node representing the conversion, which could be the same
-// node passed in if no conversion was needed.
-//
-// Return 0 if a conversion can't be done.
-//
-TIntermTyped* TIntermediate::addConversion(TOperator op, const TType& type, TIntermTyped* node)
-{
-    //
-    // Does the base type allow operation?
-    //
-    switch (node->getBasicType()) {
-        case EbtVoid:
-        case EbtSampler2D:
-        case EbtSamplerCube:
-            return 0;
-        default: break;
-    }
-
-    //
-    // Otherwise, if types are identical, no problem
-    //
-    if (type == node->getType())
-        return node;
-
-    //
-    // If one's a structure, then no conversions.
-    //
-    if (type.getStruct() || node->getType().getStruct())
-        return 0;
-
-    //
-    // If one's an array, then no conversions.
-    //
-    if (type.isArray() || node->getType().isArray())
-        return 0;
-
-    TBasicType promoteTo;
-
-    switch (op) {
-        //
-        // Explicit conversions
-        //
-        case EOpConstructBool:
-            promoteTo = EbtBool;
-            break;
-        case EOpConstructFloat:
-            promoteTo = EbtFloat;
-            break;
-        case EOpConstructInt:
-            promoteTo = EbtInt;
-            break;
-        default:
-            //
-            // implicit conversions were removed from the language.
-            //
-            if (type.getBasicType() != node->getType().getBasicType())
-                return 0;
-            //
-            // Size and structure could still differ, but that's
-            // handled by operator promotion.
-            //
-            return node;
-    }
-
-    if (node->getAsConstantUnion()) {
-
-        return (promoteConstantUnion(promoteTo, node->getAsConstantUnion()));
-    } else {
-
-        //
-        // Add a new newNode for the conversion.
-        //
-        TIntermUnary* newNode = 0;
-
-        TOperator newOp = EOpNull;
-        switch (promoteTo) {
-            case EbtFloat:
-                switch (node->getBasicType()) {
-                    case EbtInt:   newOp = EOpConvIntToFloat;  break;
-                    case EbtBool:  newOp = EOpConvBoolToFloat; break;
-                    default:
-                        infoSink.info.message(EPrefixInternalError, node->getLine(), "Bad promotion node");
-                        return 0;
-                }
-                break;
-            case EbtBool:
-                switch (node->getBasicType()) {
-                    case EbtInt:   newOp = EOpConvIntToBool;   break;
-                    case EbtFloat: newOp = EOpConvFloatToBool; break;
-                    default:
-                        infoSink.info.message(EPrefixInternalError, node->getLine(), "Bad promotion node");
-                        return 0;
-                }
-                break;
-            case EbtInt:
-                switch (node->getBasicType()) {
-                    case EbtBool:   newOp = EOpConvBoolToInt;  break;
-                    case EbtFloat:  newOp = EOpConvFloatToInt; break;
-                    default:
-                        infoSink.info.message(EPrefixInternalError, node->getLine(), "Bad promotion node");
-                        return 0;
-                }
-                break;
-            default:
-                infoSink.info.message(EPrefixInternalError, node->getLine(), "Bad promotion type");
-                return 0;
-        }
-
-        TType type(promoteTo, node->getPrecision(), EvqTemporary, node->getNominalSize(), node->isMatrix(), node->isArray());
-        newNode = new TIntermUnary(newOp, type);
-        newNode->setLine(node->getLine());
-        newNode->setOperand(node);
-
-        return newNode;
-    }
-}
-
-//
 // Safe way to combine two nodes into an aggregate.  Works with null pointers,
 // a node that's not a aggregate yet, etc.
 //
 // Returns the resulting aggregate, unless 0 was passed in for
 // both existing nodes.
 //
-TIntermAggregate* TIntermediate::growAggregate(TIntermNode* left, TIntermNode* right, const TSourceLoc& line)
+TIntermAggregate *TIntermediate::growAggregate(
+    TIntermNode *left, TIntermNode *right, const TSourceLoc &line)
 {
-    if (left == 0 && right == 0)
-        return 0;
+    if (left == NULL && right == NULL)
+        return NULL;
 
-    TIntermAggregate* aggNode = 0;
+    TIntermAggregate *aggNode = NULL;
     if (left)
         aggNode = left->getAsAggregate();
-    if (!aggNode || aggNode->getOp() != EOpNull) {
+    if (!aggNode || aggNode->getOp() != EOpNull)
+    {
         aggNode = new TIntermAggregate;
         if (left)
-            aggNode->getSequence().push_back(left);
+            aggNode->getSequence()->push_back(left);
     }
 
     if (right)
-        aggNode->getSequence().push_back(right);
+        aggNode->getSequence()->push_back(right);
 
     aggNode->setLine(line);
 
@@ -550,15 +310,17 @@ TIntermAggregate* TIntermediate::growAggregate(TIntermNode* left, TIntermNode* r
 //
 // Turn an existing node into an aggregate.
 //
-// Returns an aggregate, unless 0 was passed in for the existing node.
+// Returns an aggregate, unless NULL was passed in for the existing node.
 //
-TIntermAggregate* TIntermediate::makeAggregate(TIntermNode* node, const TSourceLoc& line)
+TIntermAggregate *TIntermediate::makeAggregate(
+    TIntermNode *node, const TSourceLoc &line)
 {
-    if (node == 0)
-        return 0;
+    if (node == NULL)
+        return NULL;
+
+    TIntermAggregate *aggNode = new TIntermAggregate;
+    aggNode->getSequence()->push_back(node);
 
-    TIntermAggregate* aggNode = new TIntermAggregate;
-    aggNode->getSequence().push_back(node);
     aggNode->setLine(line);
 
     return aggNode;
@@ -571,32 +333,45 @@ TIntermAggregate* TIntermediate::makeAggregate(TIntermNode* node, const TSourceL
 //
 // Returns the selection node created.
 //
-TIntermNode* TIntermediate::addSelection(TIntermTyped* cond, TIntermNodePair nodePair, const TSourceLoc& line)
+TIntermNode *TIntermediate::addSelection(
+    TIntermTyped *cond, TIntermNodePair nodePair, const TSourceLoc &line)
 {
     //
     // For compile time constant selections, prune the code and
     // test now.
     //
 
-    if (cond->getAsTyped() && cond->getAsTyped()->getAsConstantUnion()) {
+    if (cond->getAsTyped() && cond->getAsTyped()->getAsConstantUnion())
+    {
         if (cond->getAsConstantUnion()->getBConst(0) == true)
-            return nodePair.node1 ? setAggregateOperator(nodePair.node1, EOpSequence, nodePair.node1->getLine()) : NULL;
+        {
+            return nodePair.node1 ? setAggregateOperator(
+                nodePair.node1, EOpSequence, nodePair.node1->getLine()) : NULL;
+        }
         else
-            return nodePair.node2 ? setAggregateOperator(nodePair.node2, EOpSequence, nodePair.node2->getLine()) : NULL;
+        {
+            return nodePair.node2 ? setAggregateOperator(
+                nodePair.node2, EOpSequence, nodePair.node2->getLine()) : NULL;
+        }
     }
 
-    TIntermSelection* node = new TIntermSelection(cond, nodePair.node1, nodePair.node2);
+    TIntermSelection *node = new TIntermSelection(
+        cond, nodePair.node1, nodePair.node2);
     node->setLine(line);
 
     return node;
 }
 
-
-TIntermTyped* TIntermediate::addComma(TIntermTyped* left, TIntermTyped* right, const TSourceLoc& line)
+TIntermTyped *TIntermediate::addComma(
+    TIntermTyped *left, TIntermTyped *right, const TSourceLoc &line)
 {
-    if (left->getType().getQualifier() == EvqConst && right->getType().getQualifier() == EvqConst) {
+    if (left->getType().getQualifier() == EvqConst &&
+        right->getType().getQualifier() == EvqConst)
+    {
         return right;
-    } else {
+    }
+    else
+    {
         TIntermTyped *commaAggregate = growAggregate(left, right, line);
         commaAggregate->getAsAggregate()->setOp(EOpComma);
         commaAggregate->setType(right->getType());
@@ -612,27 +387,24 @@ TIntermTyped* TIntermediate::addComma(TIntermTyped* left, TIntermTyped* right, c
 //
 // Returns the selection node created, or 0 if one could not be.
 //
-TIntermTyped* TIntermediate::addSelection(TIntermTyped* cond, TIntermTyped* trueBlock, TIntermTyped* falseBlock, const TSourceLoc& line)
+TIntermTyped *TIntermediate::addSelection(
+    TIntermTyped *cond, TIntermTyped *trueBlock, TIntermTyped *falseBlock,
+    const TSourceLoc &line)
 {
-    //
-    // Get compatible types.
-    //
-    TIntermTyped* child = addConversion(EOpSequence, trueBlock->getType(), falseBlock);
-    if (child)
-        falseBlock = child;
-    else {
-        child = addConversion(EOpSequence, falseBlock->getType(), trueBlock);
-        if (child)
-            trueBlock = child;
-        else
-            return 0;
+    if (!cond || !trueBlock || !falseBlock ||
+        trueBlock->getType() != falseBlock->getType())
+    {
+        return NULL;
     }
 
     //
     // See if all the operands are constant, then fold it otherwise not.
     //
 
-    if (cond->getAsConstantUnion() && trueBlock->getAsConstantUnion() && falseBlock->getAsConstantUnion()) {
+    if (cond->getAsConstantUnion() &&
+        trueBlock->getAsConstantUnion() &&
+        falseBlock->getAsConstantUnion())
+    {
         if (cond->getAsConstantUnion()->getBConst(0))
             return trueBlock;
         else
@@ -642,7 +414,8 @@ TIntermTyped* TIntermediate::addSelection(TIntermTyped* cond, TIntermTyped* true
     //
     // Make a selection node.
     //
-    TIntermSelection* node = new TIntermSelection(cond, trueBlock, falseBlock, trueBlock->getType());
+    TIntermSelection *node = new TIntermSelection(
+        cond, trueBlock, falseBlock, trueBlock->getType());
     node->getTypePointer()->setQualifier(EvqTemporary);
     node->setLine(line);
 
@@ -655,29 +428,33 @@ TIntermTyped* TIntermediate::addSelection(TIntermTyped* cond, TIntermTyped* true
 // Returns the constant union node created.
 //
 
-TIntermConstantUnion* TIntermediate::addConstantUnion(ConstantUnion* unionArrayPointer, const TType& t, const TSourceLoc& line)
+TIntermConstantUnion *TIntermediate::addConstantUnion(
+    ConstantUnion *unionArrayPointer, const TType &t, const TSourceLoc &line)
 {
-    TIntermConstantUnion* node = new TIntermConstantUnion(unionArrayPointer, t);
+    TIntermConstantUnion *node = new TIntermConstantUnion(unionArrayPointer, t);
     node->setLine(line);
 
     return node;
 }
 
-TIntermTyped* TIntermediate::addSwizzle(TVectorFields& fields, const TSourceLoc& line)
+TIntermTyped *TIntermediate::addSwizzle(
+    TVectorFields &fields, const TSourceLoc &line)
 {
 
-    TIntermAggregate* node = new TIntermAggregate(EOpSequence);
+    TIntermAggregate *node = new TIntermAggregate(EOpSequence);
 
     node->setLine(line);
-    TIntermConstantUnion* constIntNode;
-    TIntermSequence &sequenceVector = node->getSequence();
-    ConstantUnion* unionArray;
+    TIntermConstantUnion *constIntNode;
+    TIntermSequence *sequenceVector = node->getSequence();
+    ConstantUnion *unionArray;
 
-    for (int i = 0; i < fields.num; i++) {
+    for (int i = 0; i < fields.num; i++)
+    {
         unionArray = new ConstantUnion[1];
         unionArray->setIConst(fields.offsets[i]);
-        constIntNode = addConstantUnion(unionArray, TType(EbtInt, EbpUndefined, EvqConst), line);
-        sequenceVector.push_back(constIntNode);
+        constIntNode = addConstantUnion(
+            unionArray, TType(EbtInt, EbpUndefined, EvqConst), line);
+        sequenceVector->push_back(constIntNode);
     }
 
     return node;
@@ -686,9 +463,11 @@ TIntermTyped* TIntermediate::addSwizzle(TVectorFields& fields, const TSourceLoc&
 //
 // Create loop nodes.
 //
-TIntermNode* TIntermediate::addLoop(TLoopType type, TIntermNode* init, TIntermTyped* cond, TIntermTyped* expr, TIntermNode* body, const TSourceLoc& line)
+TIntermNode *TIntermediate::addLoop(
+    TLoopType type, TIntermNode *init, TIntermTyped *cond, TIntermTyped *expr,
+    TIntermNode *body, const TSourceLoc &line)
 {
-    TIntermNode* node = new TIntermLoop(type, init, cond, expr, body);
+    TIntermNode *node = new TIntermLoop(type, init, cond, expr, body);
     node->setLine(line);
 
     return node;
@@ -697,14 +476,16 @@ TIntermNode* TIntermediate::addLoop(TLoopType type, TIntermNode* init, TIntermTy
 //
 // Add branches.
 //
-TIntermBranch* TIntermediate::addBranch(TOperator branchOp, const TSourceLoc& line)
+TIntermBranch* TIntermediate::addBranch(
+    TOperator branchOp, const TSourceLoc &line)
 {
     return addBranch(branchOp, 0, line);
 }
 
-TIntermBranch* TIntermediate::addBranch(TOperator branchOp, TIntermTyped* expression, const TSourceLoc& line)
+TIntermBranch* TIntermediate::addBranch(
+    TOperator branchOp, TIntermTyped *expression, const TSourceLoc &line)
 {
-    TIntermBranch* node = new TIntermBranch(branchOp, expression);
+    TIntermBranch *node = new TIntermBranch(branchOp, expression);
     node->setLine(line);
 
     return node;
@@ -714,15 +495,15 @@ TIntermBranch* TIntermediate::addBranch(TOperator branchOp, TIntermTyped* expres
 // This is to be executed once the final root is put on top by the parsing
 // process.
 //
-bool TIntermediate::postProcess(TIntermNode* root)
+bool TIntermediate::postProcess(TIntermNode *root)
 {
-    if (root == 0)
+    if (root == NULL)
         return true;
 
     //
     // First, finish off the top level sequence, if any
     //
-    TIntermAggregate* aggRoot = root->getAsAggregate();
+    TIntermAggregate *aggRoot = root->getAsAggregate();
     if (aggRoot && aggRoot->getOp() == EOpNull)
         aggRoot->setOp(EOpSequence);
 
@@ -732,769 +513,8 @@ bool TIntermediate::postProcess(TIntermNode* root)
 //
 // This deletes the tree.
 //
-void TIntermediate::remove(TIntermNode* root)
+void TIntermediate::remove(TIntermNode *root)
 {
     if (root)
         RemoveAllTreeNodes(root);
 }
-
-////////////////////////////////////////////////////////////////
-//
-// Member functions of the nodes used for building the tree.
-//
-////////////////////////////////////////////////////////////////
-
-#define REPLACE_IF_IS(node, type, original, replacement) \
-    if (node == original) { \
-        node = static_cast<type *>(replacement); \
-        return true; \
-    }
-
-bool TIntermLoop::replaceChildNode(
-    TIntermNode *original, TIntermNode *replacement)
-{
-    REPLACE_IF_IS(init, TIntermNode, original, replacement);
-    REPLACE_IF_IS(cond, TIntermTyped, original, replacement);
-    REPLACE_IF_IS(expr, TIntermTyped, original, replacement);
-    REPLACE_IF_IS(body, TIntermNode, original, replacement);
-    return false;
-}
-
-bool TIntermBranch::replaceChildNode(
-    TIntermNode *original, TIntermNode *replacement)
-{
-    REPLACE_IF_IS(expression, TIntermTyped, original, replacement);
-    return false;
-}
-
-bool TIntermBinary::replaceChildNode(
-    TIntermNode *original, TIntermNode *replacement)
-{
-    REPLACE_IF_IS(left, TIntermTyped, original, replacement);
-    REPLACE_IF_IS(right, TIntermTyped, original, replacement);
-    return false;
-}
-
-bool TIntermUnary::replaceChildNode(
-    TIntermNode *original, TIntermNode *replacement)
-{
-    REPLACE_IF_IS(operand, TIntermTyped, original, replacement);
-    return false;
-}
-
-bool TIntermAggregate::replaceChildNode(
-    TIntermNode *original, TIntermNode *replacement)
-{
-    for (size_t ii = 0; ii < sequence.size(); ++ii)
-    {
-        REPLACE_IF_IS(sequence[ii], TIntermNode, original, replacement);
-    }
-    return false;
-}
-
-bool TIntermSelection::replaceChildNode(
-    TIntermNode *original, TIntermNode *replacement)
-{
-    REPLACE_IF_IS(condition, TIntermTyped, original, replacement);
-    REPLACE_IF_IS(trueBlock, TIntermNode, original, replacement);
-    REPLACE_IF_IS(falseBlock, TIntermNode, original, replacement);
-    return false;
-}
-
-//
-// Say whether or not an operation node changes the value of a variable.
-//
-bool TIntermOperator::isAssignment() const
-{
-    switch (op) {
-        case EOpPostIncrement:
-        case EOpPostDecrement:
-        case EOpPreIncrement:
-        case EOpPreDecrement:
-        case EOpAssign:
-        case EOpAddAssign:
-        case EOpSubAssign:
-        case EOpMulAssign:
-        case EOpVectorTimesMatrixAssign:
-        case EOpVectorTimesScalarAssign:
-        case EOpMatrixTimesScalarAssign:
-        case EOpMatrixTimesMatrixAssign:
-        case EOpDivAssign:
-            return true;
-        default:
-            return false;
-    }
-}
-
-//
-// returns true if the operator is for one of the constructors
-//
-bool TIntermOperator::isConstructor() const
-{
-    switch (op) {
-        case EOpConstructVec2:
-        case EOpConstructVec3:
-        case EOpConstructVec4:
-        case EOpConstructMat2:
-        case EOpConstructMat3:
-        case EOpConstructMat4:
-        case EOpConstructFloat:
-        case EOpConstructIVec2:
-        case EOpConstructIVec3:
-        case EOpConstructIVec4:
-        case EOpConstructInt:
-        case EOpConstructBVec2:
-        case EOpConstructBVec3:
-        case EOpConstructBVec4:
-        case EOpConstructBool:
-        case EOpConstructStruct:
-            return true;
-        default:
-            return false;
-    }
-}
-
-//
-// Make sure the type of a unary operator is appropriate for its
-// combination of operation and operand type.
-//
-// Returns false in nothing makes sense.
-//
-bool TIntermUnary::promote(TInfoSink&)
-{
-    switch (op) {
-        case EOpLogicalNot:
-            if (operand->getBasicType() != EbtBool)
-                return false;
-            break;
-        case EOpNegative:
-        case EOpPostIncrement:
-        case EOpPostDecrement:
-        case EOpPreIncrement:
-        case EOpPreDecrement:
-            if (operand->getBasicType() == EbtBool)
-                return false;
-            break;
-
-            // operators for built-ins are already type checked against their prototype
-        case EOpAny:
-        case EOpAll:
-        case EOpVectorLogicalNot:
-            return true;
-
-        default:
-            if (operand->getBasicType() != EbtFloat)
-                return false;
-    }
-
-    setType(operand->getType());
-    type.setQualifier(EvqTemporary);
-
-    return true;
-}
-
-//
-// Establishes the type of the resultant operation, as well as
-// makes the operator the correct one for the operands.
-//
-// Returns false if operator can't work on operands.
-//
-bool TIntermBinary::promote(TInfoSink& infoSink)
-{
-    // This function only handles scalars, vectors, and matrices.
-    if (left->isArray() || right->isArray()) {
-        infoSink.info.message(EPrefixInternalError, getLine(), "Invalid operation for arrays");
-        return false;
-    }
-
-    // GLSL ES 2.0 does not support implicit type casting.
-    // So the basic type should always match.
-    if (left->getBasicType() != right->getBasicType())
-        return false;
-
-    //
-    // Base assumption:  just make the type the same as the left
-    // operand.  Then only deviations from this need be coded.
-    //
-    setType(left->getType());
-
-    // The result gets promoted to the highest precision.
-    TPrecision higherPrecision = GetHigherPrecision(left->getPrecision(), right->getPrecision());
-    getTypePointer()->setPrecision(higherPrecision);
-
-    // Binary operations results in temporary variables unless both
-    // operands are const.
-    if (left->getQualifier() != EvqConst || right->getQualifier() != EvqConst) {
-        getTypePointer()->setQualifier(EvqTemporary);
-    }
-
-    int size = std::max(left->getNominalSize(), right->getNominalSize());
-
-    //
-    // All scalars. Code after this test assumes this case is removed!
-    //
-    if (size == 1) {
-        switch (op) {
-            //
-            // Promote to conditional
-            //
-            case EOpEqual:
-            case EOpNotEqual:
-            case EOpLessThan:
-            case EOpGreaterThan:
-            case EOpLessThanEqual:
-            case EOpGreaterThanEqual:
-                setType(TType(EbtBool, EbpUndefined));
-                break;
-
-            //
-            // And and Or operate on conditionals
-            //
-            case EOpLogicalAnd:
-            case EOpLogicalOr:
-                // Both operands must be of type bool.
-                if (left->getBasicType() != EbtBool || right->getBasicType() != EbtBool)
-                    return false;
-                setType(TType(EbtBool, EbpUndefined));
-                break;
-
-            default:
-                break;
-        }
-        return true;
-    }
-
-    // If we reach here, at least one of the operands is vector or matrix.
-    // The other operand could be a scalar, vector, or matrix.
-    // Are the sizes compatible?
-    //
-    if (left->getNominalSize() != right->getNominalSize()) {
-        // If the nominal size of operands do not match:
-        // One of them must be scalar.
-        if (left->getNominalSize() != 1 && right->getNominalSize() != 1)
-            return false;
-        // Operator cannot be of type pure assignment.
-        if (op == EOpAssign || op == EOpInitialize)
-            return false;
-    }
-
-    //
-    // Can these two operands be combined?
-    //
-    TBasicType basicType = left->getBasicType();
-    switch (op) {
-        case EOpMul:
-            if (!left->isMatrix() && right->isMatrix()) {
-                if (left->isVector())
-                    op = EOpVectorTimesMatrix;
-                else {
-                    op = EOpMatrixTimesScalar;
-                    setType(TType(basicType, higherPrecision, EvqTemporary, size, true));
-                }
-            } else if (left->isMatrix() && !right->isMatrix()) {
-                if (right->isVector()) {
-                    op = EOpMatrixTimesVector;
-                    setType(TType(basicType, higherPrecision, EvqTemporary, size, false));
-                } else {
-                    op = EOpMatrixTimesScalar;
-                }
-            } else if (left->isMatrix() && right->isMatrix()) {
-                op = EOpMatrixTimesMatrix;
-            } else if (!left->isMatrix() && !right->isMatrix()) {
-                if (left->isVector() && right->isVector()) {
-                    // leave as component product
-                } else if (left->isVector() || right->isVector()) {
-                    op = EOpVectorTimesScalar;
-                    setType(TType(basicType, higherPrecision, EvqTemporary, size, false));
-                }
-            } else {
-                infoSink.info.message(EPrefixInternalError, getLine(), "Missing elses");
-                return false;
-            }
-            break;
-        case EOpMulAssign:
-            if (!left->isMatrix() && right->isMatrix()) {
-                if (left->isVector())
-                    op = EOpVectorTimesMatrixAssign;
-                else {
-                    return false;
-                }
-            } else if (left->isMatrix() && !right->isMatrix()) {
-                if (right->isVector()) {
-                    return false;
-                } else {
-                    op = EOpMatrixTimesScalarAssign;
-                }
-            } else if (left->isMatrix() && right->isMatrix()) {
-                op = EOpMatrixTimesMatrixAssign;
-            } else if (!left->isMatrix() && !right->isMatrix()) {
-                if (left->isVector() && right->isVector()) {
-                    // leave as component product
-                } else if (left->isVector() || right->isVector()) {
-                    if (! left->isVector())
-                        return false;
-                    op = EOpVectorTimesScalarAssign;
-                    setType(TType(basicType, higherPrecision, EvqTemporary, size, false));
-                }
-            } else {
-                infoSink.info.message(EPrefixInternalError, getLine(), "Missing elses");
-                return false;
-            }
-            break;
-
-        case EOpAssign:
-        case EOpInitialize:
-        case EOpAdd:
-        case EOpSub:
-        case EOpDiv:
-        case EOpAddAssign:
-        case EOpSubAssign:
-        case EOpDivAssign:
-            if ((left->isMatrix() && right->isVector()) ||
-                (left->isVector() && right->isMatrix()))
-                return false;
-            setType(TType(basicType, higherPrecision, EvqTemporary, size, left->isMatrix() || right->isMatrix()));
-            break;
-
-        case EOpEqual:
-        case EOpNotEqual:
-        case EOpLessThan:
-        case EOpGreaterThan:
-        case EOpLessThanEqual:
-        case EOpGreaterThanEqual:
-            if ((left->isMatrix() && right->isVector()) ||
-                (left->isVector() && right->isMatrix()))
-                return false;
-            setType(TType(EbtBool, EbpUndefined));
-            break;
-
-        default:
-            return false;
-    }
-    
-    return true;
-}
-
-bool CompareStruct(const TType& leftNodeType, ConstantUnion* rightUnionArray, ConstantUnion* leftUnionArray)
-{
-    const TFieldList& fields = leftNodeType.getStruct()->fields();
-
-    size_t structSize = fields.size();
-    size_t index = 0;
-
-    for (size_t j = 0; j < structSize; j++) {
-        size_t size = fields[j]->type()->getObjectSize();
-        for (size_t i = 0; i < size; i++) {
-            if (fields[j]->type()->getBasicType() == EbtStruct) {
-                if (!CompareStructure(*(fields[j]->type()), &rightUnionArray[index], &leftUnionArray[index]))
-                    return false;
-            } else {
-                if (leftUnionArray[index] != rightUnionArray[index])
-                    return false;
-                index++;
-            }
-        }
-    }
-    return true;
-}
-
-bool CompareStructure(const TType& leftNodeType, ConstantUnion* rightUnionArray, ConstantUnion* leftUnionArray)
-{
-    if (leftNodeType.isArray()) {
-        TType typeWithoutArrayness = leftNodeType;
-        typeWithoutArrayness.clearArrayness();
-
-        size_t arraySize = leftNodeType.getArraySize();
-
-        for (size_t i = 0; i < arraySize; ++i) {
-            size_t offset = typeWithoutArrayness.getObjectSize() * i;
-            if (!CompareStruct(typeWithoutArrayness, &rightUnionArray[offset], &leftUnionArray[offset]))
-                return false;
-        }
-    } else
-        return CompareStruct(leftNodeType, rightUnionArray, leftUnionArray);
-
-    return true;
-}
-
-//
-// The fold functions see if an operation on a constant can be done in place,
-// without generating run-time code.
-//
-// Returns the node to keep using, which may or may not be the node passed in.
-//
-
-TIntermTyped* TIntermConstantUnion::fold(TOperator op, TIntermTyped* constantNode, TInfoSink& infoSink)
-{
-    ConstantUnion *unionArray = getUnionArrayPointer();
-    size_t objectSize = getType().getObjectSize();
-
-    if (constantNode) {  // binary operations
-        TIntermConstantUnion *node = constantNode->getAsConstantUnion();
-        ConstantUnion *rightUnionArray = node->getUnionArrayPointer();
-        TType returnType = getType();
-
-        // for a case like float f = 1.2 + vec4(2,3,4,5);
-        if (constantNode->getType().getObjectSize() == 1 && objectSize > 1) {
-            rightUnionArray = new ConstantUnion[objectSize];
-            for (size_t i = 0; i < objectSize; ++i)
-                rightUnionArray[i] = *node->getUnionArrayPointer();
-            returnType = getType();
-        } else if (constantNode->getType().getObjectSize() > 1 && objectSize == 1) {
-            // for a case like float f = vec4(2,3,4,5) + 1.2;
-            unionArray = new ConstantUnion[constantNode->getType().getObjectSize()];
-            for (size_t i = 0; i < constantNode->getType().getObjectSize(); ++i)
-                unionArray[i] = *getUnionArrayPointer();
-            returnType = node->getType();
-            objectSize = constantNode->getType().getObjectSize();
-        }
-
-        ConstantUnion* tempConstArray = 0;
-        TIntermConstantUnion *tempNode;
-
-        bool boolNodeFlag = false;
-        switch(op) {
-            case EOpAdd:
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++)
-                        tempConstArray[i] = unionArray[i] + rightUnionArray[i];
-                }
-                break;
-            case EOpSub:
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++)
-                        tempConstArray[i] = unionArray[i] - rightUnionArray[i];
-                }
-                break;
-
-            case EOpMul:
-            case EOpVectorTimesScalar:
-            case EOpMatrixTimesScalar:
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++)
-                        tempConstArray[i] = unionArray[i] * rightUnionArray[i];
-                }
-                break;
-            case EOpMatrixTimesMatrix:
-                if (getType().getBasicType() != EbtFloat || node->getBasicType() != EbtFloat) {
-                    infoSink.info.message(EPrefixInternalError, getLine(), "Constant Folding cannot be done for matrix multiply");
-                    return 0;
-                }
-                {// support MSVC++6.0
-                    int size = getNominalSize();
-                    tempConstArray = new ConstantUnion[size*size];
-                    for (int row = 0; row < size; row++) {
-                        for (int column = 0; column < size; column++) {
-                            tempConstArray[size * column + row].setFConst(0.0f);
-                            for (int i = 0; i < size; i++) {
-                                tempConstArray[size * column + row].setFConst(tempConstArray[size * column + row].getFConst() + unionArray[i * size + row].getFConst() * (rightUnionArray[column * size + i].getFConst()));
-                            }
-                        }
-                    }
-                }
-                break;
-            case EOpDiv:
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++) {
-                        switch (getType().getBasicType()) {
-            case EbtFloat:
-                if (rightUnionArray[i] == 0.0f) {
-                    infoSink.info.message(EPrefixWarning, getLine(), "Divide by zero error during constant folding");
-                    tempConstArray[i].setFConst(unionArray[i].getFConst() < 0 ? -FLT_MAX : FLT_MAX);
-                } else
-                    tempConstArray[i].setFConst(unionArray[i].getFConst() / rightUnionArray[i].getFConst());
-                break;
-
-            case EbtInt:
-                if (rightUnionArray[i] == 0) {
-                    infoSink.info.message(EPrefixWarning, getLine(), "Divide by zero error during constant folding");
-                    tempConstArray[i].setIConst(INT_MAX);
-                } else
-                    tempConstArray[i].setIConst(unionArray[i].getIConst() / rightUnionArray[i].getIConst());
-                break;
-            default:
-                infoSink.info.message(EPrefixInternalError, getLine(), "Constant folding cannot be done for \"/\"");
-                return 0;
-                        }
-                    }
-                }
-                break;
-
-            case EOpMatrixTimesVector:
-                if (node->getBasicType() != EbtFloat) {
-                    infoSink.info.message(EPrefixInternalError, getLine(), "Constant Folding cannot be done for matrix times vector");
-                    return 0;
-                }
-                tempConstArray = new ConstantUnion[getNominalSize()];
-
-                {// support MSVC++6.0
-                    for (int size = getNominalSize(), i = 0; i < size; i++) {
-                        tempConstArray[i].setFConst(0.0f);
-                        for (int j = 0; j < size; j++) {
-                            tempConstArray[i].setFConst(tempConstArray[i].getFConst() + ((unionArray[j*size + i].getFConst()) * rightUnionArray[j].getFConst()));
-                        }
-                    }
-                }
-
-                tempNode = new TIntermConstantUnion(tempConstArray, node->getType());
-                tempNode->setLine(getLine());
-
-                return tempNode;
-
-            case EOpVectorTimesMatrix:
-                if (getType().getBasicType() != EbtFloat) {
-                    infoSink.info.message(EPrefixInternalError, getLine(), "Constant Folding cannot be done for vector times matrix");
-                    return 0;
-                }
-
-                tempConstArray = new ConstantUnion[getNominalSize()];
-                {// support MSVC++6.0
-                    for (int size = getNominalSize(), i = 0; i < size; i++) {
-                        tempConstArray[i].setFConst(0.0f);
-                        for (int j = 0; j < size; j++) {
-                            tempConstArray[i].setFConst(tempConstArray[i].getFConst() + ((unionArray[j].getFConst()) * rightUnionArray[i*size + j].getFConst()));
-                        }
-                    }
-                }
-                break;
-
-            case EOpLogicalAnd: // this code is written for possible future use, will not get executed currently
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++)
-                        tempConstArray[i] = unionArray[i] && rightUnionArray[i];
-                }
-                break;
-
-            case EOpLogicalOr: // this code is written for possible future use, will not get executed currently
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++)
-                        tempConstArray[i] = unionArray[i] || rightUnionArray[i];
-                }
-                break;
-
-            case EOpLogicalXor:
-                tempConstArray = new ConstantUnion[objectSize];
-                {// support MSVC++6.0
-                    for (size_t i = 0; i < objectSize; i++)
-                        switch (getType().getBasicType()) {
-            case EbtBool: tempConstArray[i].setBConst((unionArray[i] == rightUnionArray[i]) ? false : true); break;
-            default: assert(false && "Default missing");
-                    }
-                }
-                break;
-
-            case EOpLessThan:
-                assert(objectSize == 1);
-                tempConstArray = new ConstantUnion[1];
-                tempConstArray->setBConst(*unionArray < *rightUnionArray);
-                returnType = TType(EbtBool, EbpUndefined, EvqConst);
-                break;
-            case EOpGreaterThan:
-                assert(objectSize == 1);
-                tempConstArray = new ConstantUnion[1];
-                tempConstArray->setBConst(*unionArray > *rightUnionArray);
-                returnType = TType(EbtBool, EbpUndefined, EvqConst);
-                break;
-            case EOpLessThanEqual:
-                {
-                    assert(objectSize == 1);
-                    ConstantUnion constant;
-                    constant.setBConst(*unionArray > *rightUnionArray);
-                    tempConstArray = new ConstantUnion[1];
-                    tempConstArray->setBConst(!constant.getBConst());
-                    returnType = TType(EbtBool, EbpUndefined, EvqConst);
-                    break;
-                }
-            case EOpGreaterThanEqual:
-                {
-                    assert(objectSize == 1);
-                    ConstantUnion constant;
-                    constant.setBConst(*unionArray < *rightUnionArray);
-                    tempConstArray = new ConstantUnion[1];
-                    tempConstArray->setBConst(!constant.getBConst());
-                    returnType = TType(EbtBool, EbpUndefined, EvqConst);
-                    break;
-                }
-
-            case EOpEqual:
-                if (getType().getBasicType() == EbtStruct) {
-                    if (!CompareStructure(node->getType(), node->getUnionArrayPointer(), unionArray))
-                        boolNodeFlag = true;
-                } else {
-                    for (size_t i = 0; i < objectSize; i++) {
-                        if (unionArray[i] != rightUnionArray[i]) {
-                            boolNodeFlag = true;
-                            break;  // break out of for loop
-                        }
-                    }
-                }
-
-                tempConstArray = new ConstantUnion[1];
-                if (!boolNodeFlag) {
-                    tempConstArray->setBConst(true);
-                }
-                else {
-                    tempConstArray->setBConst(false);
-                }
-
-                tempNode = new TIntermConstantUnion(tempConstArray, TType(EbtBool, EbpUndefined, EvqConst));
-                tempNode->setLine(getLine());
-
-                return tempNode;
-
-            case EOpNotEqual:
-                if (getType().getBasicType() == EbtStruct) {
-                    if (CompareStructure(node->getType(), node->getUnionArrayPointer(), unionArray))
-                        boolNodeFlag = true;
-                } else {
-                    for (size_t i = 0; i < objectSize; i++) {
-                        if (unionArray[i] == rightUnionArray[i]) {
-                            boolNodeFlag = true;
-                            break;  // break out of for loop
-                        }
-                    }
-                }
-
-                tempConstArray = new ConstantUnion[1];
-                if (!boolNodeFlag) {
-                    tempConstArray->setBConst(true);
-                }
-                else {
-                    tempConstArray->setBConst(false);
-                }
-
-                tempNode = new TIntermConstantUnion(tempConstArray, TType(EbtBool, EbpUndefined, EvqConst));
-                tempNode->setLine(getLine());
-
-                return tempNode;
-
-            default:
-                infoSink.info.message(EPrefixInternalError, getLine(), "Invalid operator for constant folding");
-                return 0;
-        }
-        tempNode = new TIntermConstantUnion(tempConstArray, returnType);
-        tempNode->setLine(getLine());
-
-        return tempNode;
-    } else {
-        //
-        // Do unary operations
-        //
-        TIntermConstantUnion *newNode = 0;
-        ConstantUnion* tempConstArray = new ConstantUnion[objectSize];
-        for (size_t i = 0; i < objectSize; i++) {
-            switch(op) {
-                case EOpNegative:
-                    switch (getType().getBasicType()) {
-                        case EbtFloat: tempConstArray[i].setFConst(-unionArray[i].getFConst()); break;
-                        case EbtInt:   tempConstArray[i].setIConst(-unionArray[i].getIConst()); break;
-                        default:
-                            infoSink.info.message(EPrefixInternalError, getLine(), "Unary operation not folded into constant");
-                            return 0;
-                    }
-                    break;
-                case EOpLogicalNot: // this code is written for possible future use, will not get executed currently
-                    switch (getType().getBasicType()) {
-                        case EbtBool:  tempConstArray[i].setBConst(!unionArray[i].getBConst()); break;
-                        default:
-                            infoSink.info.message(EPrefixInternalError, getLine(), "Unary operation not folded into constant");
-                            return 0;
-                    }
-                    break;
-                default:
-                    return 0;
-            }
-        }
-        newNode = new TIntermConstantUnion(tempConstArray, getType());
-        newNode->setLine(getLine());
-        return newNode;
-    }
-}
-
-TIntermTyped* TIntermediate::promoteConstantUnion(TBasicType promoteTo, TIntermConstantUnion* node)
-{
-    size_t size = node->getType().getObjectSize();
-
-    ConstantUnion *leftUnionArray = new ConstantUnion[size];
-
-    for (size_t i = 0; i < size; i++) {
-
-        switch (promoteTo) {
-            case EbtFloat:
-                switch (node->getType().getBasicType()) {
-                    case EbtInt:
-                        leftUnionArray[i].setFConst(static_cast<float>(node->getIConst(i)));
-                        break;
-                    case EbtBool:
-                        leftUnionArray[i].setFConst(static_cast<float>(node->getBConst(i)));
-                        break;
-                    case EbtFloat:
-                        leftUnionArray[i].setFConst(static_cast<float>(node->getFConst(i)));
-                        break;
-                    default:
-                        infoSink.info.message(EPrefixInternalError, node->getLine(), "Cannot promote");
-                        return 0;
-                }
-                break;
-            case EbtInt:
-                switch (node->getType().getBasicType()) {
-                    case EbtInt:
-                        leftUnionArray[i].setIConst(static_cast<int>(node->getIConst(i)));
-                        break;
-                    case EbtBool:
-                        leftUnionArray[i].setIConst(static_cast<int>(node->getBConst(i)));
-                        break;
-                    case EbtFloat:
-                        leftUnionArray[i].setIConst(static_cast<int>(node->getFConst(i)));
-                        break;
-                    default:
-                        infoSink.info.message(EPrefixInternalError, node->getLine(), "Cannot promote");
-                        return 0;
-                }
-                break;
-            case EbtBool:
-                switch (node->getType().getBasicType()) {
-                    case EbtInt:
-                        leftUnionArray[i].setBConst(node->getIConst(i) != 0);
-                        break;
-                    case EbtBool:
-                        leftUnionArray[i].setBConst(node->getBConst(i));
-                        break;
-                    case EbtFloat:
-                        leftUnionArray[i].setBConst(node->getFConst(i) != 0.0f);
-                        break;
-                    default:
-                        infoSink.info.message(EPrefixInternalError, node->getLine(), "Cannot promote");
-                        return 0;
-                }
-
-                break;
-            default:
-                infoSink.info.message(EPrefixInternalError, node->getLine(), "Incorrect data type found");
-                return 0;
-        }
-
-    }
-
-    const TType& t = node->getType();
-
-    return addConstantUnion(leftUnionArray, TType(promoteTo, t.getPrecision(), t.getQualifier(), t.getNominalSize(), t.isMatrix(), t.isArray()), node->getLine());
-}
-
-// static
-TString TIntermTraverser::hash(const TString& name, ShHashFunction64 hashFunction)
-{
-    if (hashFunction == NULL || name.empty())
-        return name;
-    khronos_uint64_t number = (*hashFunction)(name.c_str(), name.length());
-    TStringStream stream;
-    stream << HASHED_NAME_PREFIX << std::hex << number;
-    TString hashedName = stream.str();
-    return hashedName;
-}
diff --git a/src/3rdparty/angle/src/compiler/translator/LoopInfo.cpp b/src/3rdparty/angle/src/compiler/translator/LoopInfo.cpp
new file mode 100644
index 0000000000..d931a18a23
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/LoopInfo.cpp
@@ -0,0 +1,211 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "compiler/translator/LoopInfo.h"
+
+namespace
+{
+
+int EvaluateIntConstant(TIntermConstantUnion *node)
+{
+    ASSERT(node && node->getUnionArrayPointer());
+    return node->getIConst(0);
+}
+
+int GetLoopIntIncrement(TIntermLoop *node)
+{
+    TIntermNode *expr = node->getExpression();
+    // for expression has one of the following forms:
+    //     loop_index++
+    //     loop_index--
+    //     loop_index += constant_expression
+    //     loop_index -= constant_expression
+    //     ++loop_index
+    //     --loop_index
+    // The last two forms are not specified in the spec, but I am assuming
+    // its an oversight.
+    TIntermUnary *unOp = expr->getAsUnaryNode();
+    TIntermBinary *binOp = unOp ? NULL : expr->getAsBinaryNode();
+
+    TOperator op = EOpNull;
+    TIntermConstantUnion *incrementNode = NULL;
+    if (unOp)
+    {
+        op = unOp->getOp();
+    }
+    else if (binOp)
+    {
+        op = binOp->getOp();
+        ASSERT(binOp->getRight());
+        incrementNode = binOp->getRight()->getAsConstantUnion();
+        ASSERT(incrementNode);
+    }
+
+    int increment = 0;
+    // The operator is one of: ++ -- += -=.
+    switch (op)
+    {
+      case EOpPostIncrement:
+      case EOpPreIncrement:
+        ASSERT(unOp && !binOp);
+        increment = 1;
+        break;
+      case EOpPostDecrement:
+      case EOpPreDecrement:
+        ASSERT(unOp && !binOp);
+        increment = -1;
+        break;
+      case EOpAddAssign:
+        ASSERT(!unOp && binOp);
+        increment = EvaluateIntConstant(incrementNode);
+        break;
+      case EOpSubAssign:
+        ASSERT(!unOp && binOp);
+        increment = - EvaluateIntConstant(incrementNode);
+        break;
+      default:
+        UNREACHABLE();
+    }
+
+    return increment;
+}
+
+}  // namespace anonymous
+
+TLoopIndexInfo::TLoopIndexInfo()
+    : mId(-1),
+      mType(EbtVoid),
+      mInitValue(0),
+      mStopValue(0),
+      mIncrementValue(0),
+      mOp(EOpNull),
+      mCurrentValue(0)
+{
+}
+
+void TLoopIndexInfo::fillInfo(TIntermLoop *node)
+{
+    if (node == NULL)
+        return;
+
+    // Here we assume all the operations are valid, because the loop node is
+    // already validated in ValidateLimitations.
+    TIntermSequence *declSeq =
+        node->getInit()->getAsAggregate()->getSequence();
+    TIntermBinary *declInit = (*declSeq)[0]->getAsBinaryNode();
+    TIntermSymbol *symbol = declInit->getLeft()->getAsSymbolNode();
+
+    mId = symbol->getId();
+    mType = symbol->getBasicType();
+
+    if (mType == EbtInt)
+    {
+        TIntermConstantUnion* initNode = declInit->getRight()->getAsConstantUnion();
+        mInitValue = EvaluateIntConstant(initNode);
+        mCurrentValue = mInitValue;
+        mIncrementValue = GetLoopIntIncrement(node);
+
+        TIntermBinary* binOp = node->getCondition()->getAsBinaryNode();
+        mStopValue = EvaluateIntConstant(
+            binOp->getRight()->getAsConstantUnion());
+        mOp = binOp->getOp();
+    }
+}
+
+bool TLoopIndexInfo::satisfiesLoopCondition() const
+{
+    // Relational operator is one of: > >= < <= == or !=.
+    switch (mOp)
+    {
+      case EOpEqual:
+        return (mCurrentValue == mStopValue);
+      case EOpNotEqual:
+        return (mCurrentValue != mStopValue);
+      case EOpLessThan:
+        return (mCurrentValue < mStopValue);
+      case EOpGreaterThan:
+        return (mCurrentValue > mStopValue);
+      case EOpLessThanEqual:
+        return (mCurrentValue <= mStopValue);
+      case EOpGreaterThanEqual:
+        return (mCurrentValue >= mStopValue);
+      default:
+        UNREACHABLE();
+        return false;
+    }
+}
+
+TLoopInfo::TLoopInfo()
+    : loop(NULL)
+{
+}
+
+TLoopInfo::TLoopInfo(TIntermLoop *node)
+    : loop(node)
+{
+    index.fillInfo(node);
+}
+
+TIntermLoop *TLoopStack::findLoop(TIntermSymbol *symbol)
+{
+    if (!symbol)
+        return NULL;
+    for (iterator iter = begin(); iter != end(); ++iter)
+    {
+        if (iter->index.getId() == symbol->getId())
+            return iter->loop;
+    }
+    return NULL;
+}
+
+TLoopIndexInfo *TLoopStack::getIndexInfo(TIntermSymbol *symbol)
+{
+    if (!symbol)
+        return NULL;
+    for (iterator iter = begin(); iter != end(); ++iter)
+    {
+        if (iter->index.getId() == symbol->getId())
+            return &(iter->index);
+    }
+    return NULL;
+}
+
+void TLoopStack::step()
+{
+    ASSERT(!empty());
+    rbegin()->index.step();
+}
+
+bool TLoopStack::satisfiesLoopCondition()
+{
+    ASSERT(!empty());
+    return rbegin()->index.satisfiesLoopCondition();
+}
+
+bool TLoopStack::needsToReplaceSymbolWithValue(TIntermSymbol *symbol)
+{
+    TIntermLoop *loop = findLoop(symbol);
+    return loop && loop->getUnrollFlag();
+}
+
+int TLoopStack::getLoopIndexValue(TIntermSymbol *symbol)
+{
+    TLoopIndexInfo *info = getIndexInfo(symbol);
+    ASSERT(info);
+    return info->getCurrentValue();
+}
+
+void TLoopStack::push(TIntermLoop *loop)
+{
+    TLoopInfo info(loop);
+    push_back(info);
+}
+
+void TLoopStack::pop()
+{
+    pop_back();
+}
+
diff --git a/src/3rdparty/angle/src/compiler/translator/LoopInfo.h b/src/3rdparty/angle/src/compiler/translator/LoopInfo.h
new file mode 100644
index 0000000000..5f72a6e944
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/LoopInfo.h
@@ -0,0 +1,80 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#ifndef COMPILER_TRANSLATOR_LOOP_INFO_H_
+#define COMPILER_TRANSLATOR_LOOP_INFO_H_
+
+#include "compiler/translator/IntermNode.h"
+
+class TLoopIndexInfo
+{
+  public:
+    TLoopIndexInfo();
+
+    // If type is EbtInt, fill all fields of the structure with info
+    // extracted from a loop node.
+    // If type is not EbtInt, only fill id and type.
+    void fillInfo(TIntermLoop *node);
+
+    int getId() const { return mId; }
+    void setId(int id) { mId = id; }
+    TBasicType getType() const { return mType; }
+    void setType(TBasicType type) { mType = type; }
+    int getCurrentValue() const { return mCurrentValue; }
+
+    void step() { mCurrentValue += mIncrementValue; }
+
+    // Check if the current value satisfies the loop condition.
+    bool satisfiesLoopCondition() const;
+
+  private:
+    int mId;
+    TBasicType mType;  // Either EbtInt or EbtFloat
+
+    // Below fields are only valid if the index's type is int.
+    int mInitValue;
+    int mStopValue;
+    int mIncrementValue;
+    TOperator mOp;
+    int mCurrentValue;
+};
+
+struct TLoopInfo
+{
+    TLoopIndexInfo index;
+    TIntermLoop *loop;
+
+    TLoopInfo();
+    TLoopInfo(TIntermLoop *node);
+};
+
+class TLoopStack : public TVector<TLoopInfo>
+{
+  public:
+    // Search loop stack for a loop whose index matches the input symbol.
+    TIntermLoop *findLoop(TIntermSymbol *symbol);
+
+    // Find the loop index info in the loop stack by the input symbol.
+    TLoopIndexInfo *getIndexInfo(TIntermSymbol *symbol);
+
+    // Update the currentValue for the next loop iteration.
+    void step();
+
+    // Return false if loop condition is no longer satisfied.
+    bool satisfiesLoopCondition();
+
+    // Check if the symbol is the index of a loop that's unrolled.
+    bool needsToReplaceSymbolWithValue(TIntermSymbol *symbol);
+
+    // Return the current value of a given loop index symbol.
+    int getLoopIndexValue(TIntermSymbol *symbol);
+
+    void push(TIntermLoop *info);
+    void pop();
+};
+
+#endif // COMPILER_TRANSLATOR_LOOP_INDEX_H_
+
diff --git a/src/3rdparty/angle/src/compiler/translator/MapLongVariableNames.cpp b/src/3rdparty/angle/src/compiler/translator/MapLongVariableNames.cpp
deleted file mode 100644
index ef629c26b1..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/MapLongVariableNames.cpp
+++ /dev/null
@@ -1,115 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#include "compiler/translator/MapLongVariableNames.h"
-
-namespace {
-
-TString mapLongName(size_t id, const TString& name, bool isGlobal)
-{
-    ASSERT(name.size() > MAX_SHORTENED_IDENTIFIER_SIZE);
-    TStringStream stream;
-    stream << "webgl_";
-    if (isGlobal)
-        stream << "g";
-    stream << id;
-    if (name[0] != '_')
-        stream << "_";
-    stream << name.substr(0, MAX_SHORTENED_IDENTIFIER_SIZE - stream.str().size());
-    return stream.str();
-}
-
-LongNameMap* gLongNameMapInstance = NULL;
-
-}  // anonymous namespace
-
-LongNameMap::LongNameMap()
-    : refCount(0)
-{
-}
-
-LongNameMap::~LongNameMap()
-{
-}
-
-// static
-LongNameMap* LongNameMap::GetInstance()
-{
-    if (gLongNameMapInstance == NULL)
-        gLongNameMapInstance = new LongNameMap;
-    gLongNameMapInstance->refCount++;
-    return gLongNameMapInstance;
-}
-
-void LongNameMap::Release()
-{
-    ASSERT(gLongNameMapInstance == this);
-    ASSERT(refCount > 0);
-    refCount--;
-    if (refCount == 0) {
-        delete gLongNameMapInstance;
-        gLongNameMapInstance = NULL;
-    }
-}
-
-const char* LongNameMap::Find(const char* originalName) const
-{
-    std::map<std::string, std::string>::const_iterator it = mLongNameMap.find(
-        originalName);
-    if (it != mLongNameMap.end())
-        return (*it).second.c_str();
-    return NULL;
-}
-
-void LongNameMap::Insert(const char* originalName, const char* mappedName)
-{
-    mLongNameMap.insert(std::map<std::string, std::string>::value_type(
-        originalName, mappedName));
-}
-
-size_t LongNameMap::Size() const
-{
-    return mLongNameMap.size();
-}
-
-MapLongVariableNames::MapLongVariableNames(LongNameMap* globalMap)
-{
-    ASSERT(globalMap);
-    mGlobalMap = globalMap;
-}
-
-void MapLongVariableNames::visitSymbol(TIntermSymbol* symbol)
-{
-    ASSERT(symbol != NULL);
-    if (symbol->getSymbol().size() > MAX_SHORTENED_IDENTIFIER_SIZE) {
-        switch (symbol->getQualifier()) {
-          case EvqVaryingIn:
-          case EvqVaryingOut:
-          case EvqInvariantVaryingIn:
-          case EvqInvariantVaryingOut:
-          case EvqUniform:
-            symbol->setSymbol(
-                mapGlobalLongName(symbol->getSymbol()));
-            break;
-          default:
-            symbol->setSymbol(
-                mapLongName(symbol->getId(), symbol->getSymbol(), false));
-            break;
-        };
-    }
-}
-
-TString MapLongVariableNames::mapGlobalLongName(const TString& name)
-{
-    ASSERT(mGlobalMap);
-    const char* mappedName = mGlobalMap->Find(name.c_str());
-    if (mappedName != NULL)
-        return mappedName;
-    size_t id = mGlobalMap->Size();
-    TString rt = mapLongName(id, name, true);
-    mGlobalMap->Insert(name.c_str(), rt.c_str());
-    return rt;
-}
diff --git a/src/3rdparty/angle/src/compiler/translator/MapLongVariableNames.h b/src/3rdparty/angle/src/compiler/translator/MapLongVariableNames.h
deleted file mode 100644
index 3b085a3687..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/MapLongVariableNames.h
+++ /dev/null
@@ -1,58 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#ifndef COMPILER_MAP_LONG_VARIABLE_NAMES_H_
-#define COMPILER_MAP_LONG_VARIABLE_NAMES_H_
-
-#include "GLSLANG/ShaderLang.h"
-
-#include "compiler/translator/intermediate.h"
-#include "compiler/translator/VariableInfo.h"
-
-// This size does not include '\0' in the end.
-#define MAX_SHORTENED_IDENTIFIER_SIZE 32
-
-// This is a ref-counted singleton. GetInstance() returns a pointer to the
-// singleton, and after use, call Release(). GetInstance() and Release() should
-// be paired.
-class LongNameMap {
-public:
-    static LongNameMap* GetInstance();
-    void Release();
-
-    // Return the mapped name if <originalName, mappedName> is in the map;
-    // otherwise, return NULL.
-    const char* Find(const char* originalName) const;
-
-    // Insert a pair into the map.
-    void Insert(const char* originalName, const char* mappedName);
-
-    // Return the number of entries in the map.
-    size_t Size() const;
-
-private:
-    LongNameMap();
-    ~LongNameMap();
-
-    size_t refCount;
-    std::map<std::string, std::string> mLongNameMap;
-};
-
-// Traverses intermediate tree to map attributes and uniforms names that are
-// longer than MAX_SHORTENED_IDENTIFIER_SIZE to MAX_SHORTENED_IDENTIFIER_SIZE.
-class MapLongVariableNames : public TIntermTraverser {
-public:
-    MapLongVariableNames(LongNameMap* globalMap);
-
-    virtual void visitSymbol(TIntermSymbol*);
-
-private:
-    TString mapGlobalLongName(const TString& name);
-
-    LongNameMap* mGlobalMap;
-};
-
-#endif  // COMPILER_MAP_LONG_VARIABLE_NAMES_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/NodeSearch.h b/src/3rdparty/angle/src/compiler/translator/NodeSearch.h
index b58c7ec689..60070c9d33 100644
--- a/src/3rdparty/angle/src/compiler/translator/NodeSearch.h
+++ b/src/3rdparty/angle/src/compiler/translator/NodeSearch.h
@@ -9,7 +9,7 @@
 #ifndef TRANSLATOR_NODESEARCH_H_
 #define TRANSLATOR_NODESEARCH_H_
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 namespace sh
 {
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputESSL.cpp b/src/3rdparty/angle/src/compiler/translator/OutputESSL.cpp
index 8367412462..65635af1ff 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputESSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/OutputESSL.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,8 +10,9 @@ TOutputESSL::TOutputESSL(TInfoSinkBase& objSink,
                          ShArrayIndexClampingStrategy clampingStrategy,
                          ShHashFunction64 hashFunction,
                          NameMap& nameMap,
-                         TSymbolTable& symbolTable)
-    : TOutputGLSLBase(objSink, clampingStrategy, hashFunction, nameMap, symbolTable)
+                         TSymbolTable& symbolTable,
+                         int shaderVersion)
+    : TOutputGLSLBase(objSink, clampingStrategy, hashFunction, nameMap, symbolTable, shaderVersion)
 {
 }
 
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputESSL.h b/src/3rdparty/angle/src/compiler/translator/OutputESSL.h
index 2f02979a05..8a567fb8aa 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputESSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/OutputESSL.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -16,7 +16,8 @@ public:
                 ShArrayIndexClampingStrategy clampingStrategy,
                 ShHashFunction64 hashFunction,
                 NameMap& nameMap,
-                TSymbolTable& symbolTable);
+                TSymbolTable& symbolTable,
+                int shaderVersion);
 
 protected:
     virtual bool writeVariablePrecision(TPrecision precision);
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputGLSL.cpp b/src/3rdparty/angle/src/compiler/translator/OutputGLSL.cpp
index 5589560682..eb7cbb4ae8 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputGLSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/OutputGLSL.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,8 +10,9 @@ TOutputGLSL::TOutputGLSL(TInfoSinkBase& objSink,
                          ShArrayIndexClampingStrategy clampingStrategy,
                          ShHashFunction64 hashFunction,
                          NameMap& nameMap,
-                         TSymbolTable& symbolTable)
-    : TOutputGLSLBase(objSink, clampingStrategy, hashFunction, nameMap, symbolTable)
+                         TSymbolTable& symbolTable,
+                         int shaderVersion)
+    : TOutputGLSLBase(objSink, clampingStrategy, hashFunction, nameMap, symbolTable, shaderVersion)
 {
 }
 
@@ -33,3 +34,24 @@ void TOutputGLSL::visitSymbol(TIntermSymbol* node)
         TOutputGLSLBase::visitSymbol(node);
     }
 }
+
+TString TOutputGLSL::translateTextureFunction(TString& name)
+{
+    static const char *simpleRename[] = {
+        "texture2DLodEXT", "texture2DLod",
+        "texture2DProjLodEXT", "texture2DProjLod",
+        "textureCubeLodEXT", "textureCubeLod",
+        "texture2DGradEXT", "texture2DGradARB",
+        "texture2DProjGradEXT", "texture2DProjGradARB",
+        "textureCubeGradEXT", "textureCubeGradARB",
+        NULL, NULL
+    };
+
+    for (int i = 0; simpleRename[i] != NULL; i += 2) {
+        if (name == simpleRename[i]) {
+            return simpleRename[i+1];
+        }
+    }
+
+    return name;
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputGLSL.h b/src/3rdparty/angle/src/compiler/translator/OutputGLSL.h
index e1f114d347..bceebe397d 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputGLSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/OutputGLSL.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -16,11 +16,13 @@ public:
                 ShArrayIndexClampingStrategy clampingStrategy,
                 ShHashFunction64 hashFunction,
                 NameMap& nameMap,
-                TSymbolTable& symbolTable);
+                TSymbolTable& symbolTable,
+                int shaderVersion);
 
 protected:
     virtual bool writeVariablePrecision(TPrecision);
     virtual void visitSymbol(TIntermSymbol* node);
+    virtual TString translateTextureFunction(TString& name);
 };
 
 #endif  // CROSSCOMPILERGLSL_OUTPUTGLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.cpp b/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.cpp
index f2f0a3d6be..6d07cccc04 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,7 +11,7 @@
 
 namespace
 {
-TString arrayBrackets(const TType& type)
+TString arrayBrackets(const TType &type)
 {
     ASSERT(type.isArray());
     TInfoSinkBase out;
@@ -19,13 +19,14 @@ TString arrayBrackets(const TType& type)
     return TString(out.c_str());
 }
 
-bool isSingleStatement(TIntermNode* node) {
-    if (const TIntermAggregate* aggregate = node->getAsAggregate())
+bool isSingleStatement(TIntermNode *node)
+{
+    if (const TIntermAggregate *aggregate = node->getAsAggregate())
     {
         return (aggregate->getOp() != EOpFunction) &&
                (aggregate->getOp() != EOpSequence);
     }
-    else if (const TIntermSelection* selection = node->getAsSelectionNode())
+    else if (const TIntermSelection *selection = node->getAsSelectionNode())
     {
         // Ternary operators are usually part of an assignment operator.
         // This handles those rare cases in which they are all by themselves.
@@ -39,49 +40,62 @@ bool isSingleStatement(TIntermNode* node) {
 }
 }  // namespace
 
-TOutputGLSLBase::TOutputGLSLBase(TInfoSinkBase& objSink,
+TOutputGLSLBase::TOutputGLSLBase(TInfoSinkBase &objSink,
                                  ShArrayIndexClampingStrategy clampingStrategy,
                                  ShHashFunction64 hashFunction,
-                                 NameMap& nameMap,
-                                 TSymbolTable& symbolTable)
+                                 NameMap &nameMap,
+                                 TSymbolTable &symbolTable,
+                                 int shaderVersion)
     : TIntermTraverser(true, true, true),
       mObjSink(objSink),
       mDeclaringVariables(false),
       mClampingStrategy(clampingStrategy),
       mHashFunction(hashFunction),
       mNameMap(nameMap),
-      mSymbolTable(symbolTable)
+      mSymbolTable(symbolTable),
+      mShaderVersion(shaderVersion)
 {
 }
 
-void TOutputGLSLBase::writeTriplet(Visit visit, const char* preStr, const char* inStr, const char* postStr)
+void TOutputGLSLBase::writeTriplet(
+    Visit visit, const char *preStr, const char *inStr, const char *postStr)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
     if (visit == PreVisit && preStr)
-    {
         out << preStr;
-    }
     else if (visit == InVisit && inStr)
-    {
         out << inStr;
-    }
     else if (visit == PostVisit && postStr)
-    {
         out << postStr;
-    }
 }
 
-void TOutputGLSLBase::writeVariableType(const TType& type)
+void TOutputGLSLBase::writeBuiltInFunctionTriplet(
+    Visit visit, const char *preStr, bool useEmulatedFunction)
+{
+    TString preString = useEmulatedFunction ?
+        BuiltInFunctionEmulator::GetEmulatedFunctionName(preStr) : preStr;
+    writeTriplet(visit, preString.c_str(), ", ", ")");
+}
+
+void TOutputGLSLBase::writeVariableType(const TType &type)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
     TQualifier qualifier = type.getQualifier();
-    // TODO(alokp): Validate qualifier for variable declarations.
-    if ((qualifier != EvqTemporary) && (qualifier != EvqGlobal))
+    if (qualifier != EvqTemporary && qualifier != EvqGlobal)
+    {
         out << type.getQualifierString() << " ";
+    }
     // Declare the struct if we have not done so already.
-    if ((type.getBasicType() == EbtStruct) && !structDeclared(type.getStruct()))
+    if (type.getBasicType() == EbtStruct && !structDeclared(type.getStruct()))
     {
-        declareStruct(type.getStruct());
+        TStructure *structure = type.getStruct();
+
+        declareStruct(structure);
+
+        if (!structure->name().empty())
+        {
+            mDeclaredStructs.insert(structure->uniqueId());
+        }
     }
     else
     {
@@ -91,19 +105,19 @@ void TOutputGLSLBase::writeVariableType(const TType& type)
     }
 }
 
-void TOutputGLSLBase::writeFunctionParameters(const TIntermSequence& args)
+void TOutputGLSLBase::writeFunctionParameters(const TIntermSequence &args)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
     for (TIntermSequence::const_iterator iter = args.begin();
          iter != args.end(); ++iter)
     {
-        const TIntermSymbol* arg = (*iter)->getAsSymbolNode();
+        const TIntermSymbol *arg = (*iter)->getAsSymbolNode();
         ASSERT(arg != NULL);
 
-        const TType& type = arg->getType();
+        const TType &type = arg->getType();
         writeVariableType(type);
 
-        const TString& name = arg->getSymbol();
+        const TString &name = arg->getSymbol();
         if (!name.empty())
             out << " " << hashName(name);
         if (type.isArray())
@@ -115,23 +129,24 @@ void TOutputGLSLBase::writeFunctionParameters(const TIntermSequence& args)
     }
 }
 
-const ConstantUnion* TOutputGLSLBase::writeConstantUnion(const TType& type,
-                                                         const ConstantUnion* pConstUnion)
+const ConstantUnion *TOutputGLSLBase::writeConstantUnion(
+    const TType &type, const ConstantUnion *pConstUnion)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
 
     if (type.getBasicType() == EbtStruct)
     {
-        const TStructure* structure = type.getStruct();
+        const TStructure *structure = type.getStruct();
         out << hashName(structure->name()) << "(";
 
-        const TFieldList& fields = structure->fields();
+        const TFieldList &fields = structure->fields();
         for (size_t i = 0; i < fields.size(); ++i)
         {
-            const TType* fieldType = fields[i]->type();
+            const TType *fieldType = fields[i]->type();
             ASSERT(fieldType != NULL);
             pConstUnion = writeConstantUnion(*fieldType, pConstUnion);
-            if (i != fields.size() - 1) out << ", ";
+            if (i != fields.size() - 1)
+                out << ", ";
         }
         out << ")";
     }
@@ -139,28 +154,37 @@ const ConstantUnion* TOutputGLSLBase::writeConstantUnion(const TType& type,
     {
         size_t size = type.getObjectSize();
         bool writeType = size > 1;
-        if (writeType) out << getTypeName(type) << "(";
+        if (writeType)
+            out << getTypeName(type) << "(";
         for (size_t i = 0; i < size; ++i, ++pConstUnion)
         {
             switch (pConstUnion->getType())
             {
-                case EbtFloat: out << std::min(FLT_MAX, std::max(-FLT_MAX, pConstUnion->getFConst())); break;
-                case EbtInt: out << pConstUnion->getIConst(); break;
-                case EbtBool: out << pConstUnion->getBConst(); break;
-                default: UNREACHABLE();
+              case EbtFloat:
+                out << std::min(FLT_MAX, std::max(-FLT_MAX, pConstUnion->getFConst()));
+                break;
+              case EbtInt:
+                out << pConstUnion->getIConst();
+                break;
+              case EbtBool:
+                out << pConstUnion->getBConst();
+                break;
+              default: UNREACHABLE();
             }
-            if (i != size - 1) out << ", ";
+            if (i != size - 1)
+                out << ", ";
         }
-        if (writeType) out << ")";
+        if (writeType)
+            out << ")";
     }
     return pConstUnion;
 }
 
-void TOutputGLSLBase::visitSymbol(TIntermSymbol* node)
+void TOutputGLSLBase::visitSymbol(TIntermSymbol *node)
 {
-    TInfoSinkBase& out = objSink();
-    if (mLoopUnroll.NeedsToReplaceSymbolWithValue(node))
-        out << mLoopUnroll.GetLoopIndexValue(node);
+    TInfoSinkBase &out = objSink();
+    if (mLoopUnrollStack.needsToReplaceSymbolWithValue(node))
+        out << mLoopUnrollStack.getLoopIndexValue(node);
     else
         out << hashVariableName(node->getSymbol());
 
@@ -168,240 +192,303 @@ void TOutputGLSLBase::visitSymbol(TIntermSymbol* node)
         out << arrayBrackets(node->getType());
 }
 
-void TOutputGLSLBase::visitConstantUnion(TIntermConstantUnion* node)
+void TOutputGLSLBase::visitConstantUnion(TIntermConstantUnion *node)
 {
     writeConstantUnion(node->getType(), node->getUnionArrayPointer());
 }
 
-bool TOutputGLSLBase::visitBinary(Visit visit, TIntermBinary* node)
+bool TOutputGLSLBase::visitBinary(Visit visit, TIntermBinary *node)
 {
     bool visitChildren = true;
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
     switch (node->getOp())
     {
-        case EOpInitialize:
+      case EOpInitialize:
+        if (visit == InVisit)
+        {
+            out << " = ";
+            // RHS of initialize is not being declared.
+            mDeclaringVariables = false;
+        }
+        break;
+      case EOpAssign:
+        writeTriplet(visit, "(", " = ", ")");
+        break;
+      case EOpAddAssign:
+        writeTriplet(visit, "(", " += ", ")");
+        break;
+      case EOpSubAssign:
+        writeTriplet(visit, "(", " -= ", ")");
+        break;
+      case EOpDivAssign:
+        writeTriplet(visit, "(", " /= ", ")");
+        break;
+      // Notice the fall-through.
+      case EOpMulAssign:
+      case EOpVectorTimesMatrixAssign:
+      case EOpVectorTimesScalarAssign:
+      case EOpMatrixTimesScalarAssign:
+      case EOpMatrixTimesMatrixAssign:
+        writeTriplet(visit, "(", " *= ", ")");
+        break;
+
+      case EOpIndexDirect:
+        writeTriplet(visit, NULL, "[", "]");
+        break;
+      case EOpIndexIndirect:
+        if (node->getAddIndexClamp())
+        {
             if (visit == InVisit)
             {
-                out << " = ";
-                // RHS of initialize is not being declared.
-                mDeclaringVariables = false;
+                if (mClampingStrategy == SH_CLAMP_WITH_CLAMP_INTRINSIC)
+                    out << "[int(clamp(float(";
+                else
+                    out << "[webgl_int_clamp(";
             }
-            break;
-        case EOpAssign: writeTriplet(visit, "(", " = ", ")"); break;
-        case EOpAddAssign: writeTriplet(visit, "(", " += ", ")"); break;
-        case EOpSubAssign: writeTriplet(visit, "(", " -= ", ")"); break;
-        case EOpDivAssign: writeTriplet(visit, "(", " /= ", ")"); break;
-        // Notice the fall-through.
-        case EOpMulAssign: 
-        case EOpVectorTimesMatrixAssign:
-        case EOpVectorTimesScalarAssign:
-        case EOpMatrixTimesScalarAssign:
-        case EOpMatrixTimesMatrixAssign:
-            writeTriplet(visit, "(", " *= ", ")");
-            break;
-
-        case EOpIndexDirect:
-            writeTriplet(visit, NULL, "[", "]");
-            break;
-        case EOpIndexIndirect:
-            if (node->getAddIndexClamp())
+            else if (visit == PostVisit)
             {
-                if (visit == InVisit)
+                int maxSize;
+                TIntermTyped *left = node->getLeft();
+                TType leftType = left->getType();
+
+                if (left->isArray())
                 {
-                    if (mClampingStrategy == SH_CLAMP_WITH_CLAMP_INTRINSIC) {
-                        out << "[int(clamp(float(";
-                    } else {
-                        out << "[webgl_int_clamp(";
-                    }
+                    // The shader will fail validation if the array length is not > 0.
+                    maxSize = leftType.getArraySize() - 1;
                 }
-                else if (visit == PostVisit)
+                else
                 {
-                    int maxSize;
-                    TIntermTyped *left = node->getLeft();
-                    TType leftType = left->getType();
-
-                    if (left->isArray())
-                    {
-                        // The shader will fail validation if the array length is not > 0.
-                        maxSize = leftType.getArraySize() - 1;
-                    }
-                    else
-                    {
-                        maxSize = leftType.getNominalSize() - 1;
-                    }
-
-                    if (mClampingStrategy == SH_CLAMP_WITH_CLAMP_INTRINSIC) {
-                        out << "), 0.0, float(" << maxSize << ")))]";
-                    } else {
-                        out << ", 0, " << maxSize << ")]";
-                    }
+                    maxSize = leftType.getNominalSize() - 1;
                 }
+
+                if (mClampingStrategy == SH_CLAMP_WITH_CLAMP_INTRINSIC)
+                    out << "), 0.0, float(" << maxSize << ")))]";
+                else
+                    out << ", 0, " << maxSize << ")]";
             }
-            else
-            {
-                writeTriplet(visit, NULL, "[", "]");
-            }
-            break;
-        case EOpIndexDirectStruct:
-            if (visit == InVisit)
-            {
-                // Here we are writing out "foo.bar", where "foo" is struct
-                // and "bar" is field. In AST, it is represented as a binary
-                // node, where left child represents "foo" and right child "bar".
-                // The node itself represents ".". The struct field "bar" is
-                // actually stored as an index into TStructure::fields.
-                out << ".";
-                const TStructure* structure = node->getLeft()->getType().getStruct();
-                const TIntermConstantUnion* index = node->getRight()->getAsConstantUnion();
-                const TField* field = structure->fields()[index->getIConst(0)];
-
-                TString fieldName = field->name();
-                if (!mSymbolTable.findBuiltIn(structure->name()))
-                    fieldName = hashName(fieldName);
-
-                out << fieldName;
-                visitChildren = false;
-            }
-            break;
-        case EOpVectorSwizzle:
-            if (visit == InVisit)
+        }
+        else
+        {
+            writeTriplet(visit, NULL, "[", "]");
+        }
+        break;
+      case EOpIndexDirectStruct:
+        if (visit == InVisit)
+        {
+            // Here we are writing out "foo.bar", where "foo" is struct
+            // and "bar" is field. In AST, it is represented as a binary
+            // node, where left child represents "foo" and right child "bar".
+            // The node itself represents ".". The struct field "bar" is
+            // actually stored as an index into TStructure::fields.
+            out << ".";
+            const TStructure *structure = node->getLeft()->getType().getStruct();
+            const TIntermConstantUnion *index = node->getRight()->getAsConstantUnion();
+            const TField *field = structure->fields()[index->getIConst(0)];
+
+            TString fieldName = field->name();
+            if (!mSymbolTable.findBuiltIn(structure->name(), mShaderVersion))
+                fieldName = hashName(fieldName);
+
+            out << fieldName;
+            visitChildren = false;
+        }
+        break;
+      case EOpVectorSwizzle:
+        if (visit == InVisit)
+        {
+            out << ".";
+            TIntermAggregate *rightChild = node->getRight()->getAsAggregate();
+            TIntermSequence *sequence = rightChild->getSequence();
+            for (TIntermSequence::iterator sit = sequence->begin(); sit != sequence->end(); ++sit)
             {
-                out << ".";
-                TIntermAggregate* rightChild = node->getRight()->getAsAggregate();
-                TIntermSequence& sequence = rightChild->getSequence();
-                for (TIntermSequence::iterator sit = sequence.begin(); sit != sequence.end(); ++sit)
+                TIntermConstantUnion *element = (*sit)->getAsConstantUnion();
+                ASSERT(element->getBasicType() == EbtInt);
+                ASSERT(element->getNominalSize() == 1);
+                const ConstantUnion& data = element->getUnionArrayPointer()[0];
+                ASSERT(data.getType() == EbtInt);
+                switch (data.getIConst())
                 {
-                    TIntermConstantUnion* element = (*sit)->getAsConstantUnion();
-                    ASSERT(element->getBasicType() == EbtInt);
-                    ASSERT(element->getNominalSize() == 1);
-                    const ConstantUnion& data = element->getUnionArrayPointer()[0];
-                    ASSERT(data.getType() == EbtInt);
-                    switch (data.getIConst())
-                    {
-                        case 0: out << "x"; break;
-                        case 1: out << "y"; break;
-                        case 2: out << "z"; break;
-                        case 3: out << "w"; break;
-                        default: UNREACHABLE(); break;
-                    }
+                  case 0:
+                    out << "x";
+                    break;
+                  case 1:
+                    out << "y";
+                    break;
+                  case 2:
+                    out << "z";
+                    break;
+                  case 3:
+                    out << "w";
+                    break;
+                  default:
+                    UNREACHABLE();
                 }
-                visitChildren = false;
             }
-            break;
-
-        case EOpAdd: writeTriplet(visit, "(", " + ", ")"); break;
-        case EOpSub: writeTriplet(visit, "(", " - ", ")"); break;
-        case EOpMul: writeTriplet(visit, "(", " * ", ")"); break;
-        case EOpDiv: writeTriplet(visit, "(", " / ", ")"); break;
-        case EOpMod: UNIMPLEMENTED(); break;
-        case EOpEqual: writeTriplet(visit, "(", " == ", ")"); break;
-        case EOpNotEqual: writeTriplet(visit, "(", " != ", ")"); break;
-        case EOpLessThan: writeTriplet(visit, "(", " < ", ")"); break;
-        case EOpGreaterThan: writeTriplet(visit, "(", " > ", ")"); break;
-        case EOpLessThanEqual: writeTriplet(visit, "(", " <= ", ")"); break;
-        case EOpGreaterThanEqual: writeTriplet(visit, "(", " >= ", ")"); break;
-
-        // Notice the fall-through.
-        case EOpVectorTimesScalar:
-        case EOpVectorTimesMatrix:
-        case EOpMatrixTimesVector:
-        case EOpMatrixTimesScalar:
-        case EOpMatrixTimesMatrix:
-            writeTriplet(visit, "(", " * ", ")");
-            break;
-
-        case EOpLogicalOr: writeTriplet(visit, "(", " || ", ")"); break;
-        case EOpLogicalXor: writeTriplet(visit, "(", " ^^ ", ")"); break;
-        case EOpLogicalAnd: writeTriplet(visit, "(", " && ", ")"); break;
-        default: UNREACHABLE(); break;
+            visitChildren = false;
+        }
+        break;
+
+      case EOpAdd:
+        writeTriplet(visit, "(", " + ", ")");
+        break;
+      case EOpSub:
+        writeTriplet(visit, "(", " - ", ")");
+        break;
+      case EOpMul:
+        writeTriplet(visit, "(", " * ", ")");
+        break;
+      case EOpDiv:
+        writeTriplet(visit, "(", " / ", ")");
+        break;
+      case EOpMod:
+        UNIMPLEMENTED();
+        break;
+      case EOpEqual:
+        writeTriplet(visit, "(", " == ", ")");
+        break;
+      case EOpNotEqual:
+        writeTriplet(visit, "(", " != ", ")");
+        break;
+      case EOpLessThan:
+        writeTriplet(visit, "(", " < ", ")");
+        break;
+      case EOpGreaterThan:
+        writeTriplet(visit, "(", " > ", ")");
+        break;
+      case EOpLessThanEqual:
+        writeTriplet(visit, "(", " <= ", ")");
+        break;
+      case EOpGreaterThanEqual:
+        writeTriplet(visit, "(", " >= ", ")");
+        break;
+
+      // Notice the fall-through.
+      case EOpVectorTimesScalar:
+      case EOpVectorTimesMatrix:
+      case EOpMatrixTimesVector:
+      case EOpMatrixTimesScalar:
+      case EOpMatrixTimesMatrix:
+        writeTriplet(visit, "(", " * ", ")");
+        break;
+
+      case EOpLogicalOr:
+        writeTriplet(visit, "(", " || ", ")");
+        break;
+      case EOpLogicalXor:
+        writeTriplet(visit, "(", " ^^ ", ")");
+        break;
+      case EOpLogicalAnd:
+        writeTriplet(visit, "(", " && ", ")");
+        break;
+      default:
+        UNREACHABLE();
     }
 
     return visitChildren;
 }
 
-bool TOutputGLSLBase::visitUnary(Visit visit, TIntermUnary* node)
+bool TOutputGLSLBase::visitUnary(Visit visit, TIntermUnary *node)
 {
     TString preString;
     TString postString = ")";
 
     switch (node->getOp())
     {
-        case EOpNegative: preString = "(-"; break;
-        case EOpVectorLogicalNot: preString = "not("; break;
-        case EOpLogicalNot: preString = "(!"; break;
-
-        case EOpPostIncrement: preString = "("; postString = "++)"; break;
-        case EOpPostDecrement: preString = "("; postString = "--)"; break;
-        case EOpPreIncrement: preString = "(++"; break;
-        case EOpPreDecrement: preString = "(--"; break;
-
-        case EOpConvIntToBool:
-        case EOpConvFloatToBool:
-            switch (node->getOperand()->getType().getNominalSize())
-            {
-                case 1: preString =  "bool(";  break;
-                case 2: preString = "bvec2("; break;
-                case 3: preString = "bvec3("; break;
-                case 4: preString = "bvec4("; break;
-                default: UNREACHABLE();
-            }
-            break;
-        case EOpConvBoolToFloat:
-        case EOpConvIntToFloat:
-            switch (node->getOperand()->getType().getNominalSize())
-            {
-                case 1: preString = "float(";  break;
-                case 2: preString = "vec2("; break;
-                case 3: preString = "vec3("; break;
-                case 4: preString = "vec4("; break;
-                default: UNREACHABLE();
-            }
-            break;
-        case EOpConvFloatToInt:
-        case EOpConvBoolToInt:
-            switch (node->getOperand()->getType().getNominalSize())
-            {
-                case 1: preString = "int(";  break;
-                case 2: preString = "ivec2("; break;
-                case 3: preString = "ivec3("; break;
-                case 4: preString = "ivec4("; break;
-                default: UNREACHABLE();
-            }
-            break;
-
-        case EOpRadians: preString = "radians("; break;
-        case EOpDegrees: preString = "degrees("; break;
-        case EOpSin: preString = "sin("; break;
-        case EOpCos: preString = "cos("; break;
-        case EOpTan: preString = "tan("; break;
-        case EOpAsin: preString = "asin("; break;
-        case EOpAcos: preString = "acos("; break;
-        case EOpAtan: preString = "atan("; break;
-
-        case EOpExp: preString = "exp("; break;
-        case EOpLog: preString = "log("; break;
-        case EOpExp2: preString = "exp2("; break;
-        case EOpLog2: preString = "log2("; break;
-        case EOpSqrt: preString = "sqrt("; break;
-        case EOpInverseSqrt: preString = "inversesqrt("; break;
-
-        case EOpAbs: preString = "abs("; break;
-        case EOpSign: preString = "sign("; break;
-        case EOpFloor: preString = "floor("; break;
-        case EOpCeil: preString = "ceil("; break;
-        case EOpFract: preString = "fract("; break;
-
-        case EOpLength: preString = "length("; break;
-        case EOpNormalize: preString = "normalize("; break;
-
-        case EOpDFdx: preString = "dFdx("; break;
-        case EOpDFdy: preString = "dFdy("; break;
-        case EOpFwidth: preString = "fwidth("; break;
-
-        case EOpAny: preString = "any("; break;
-        case EOpAll: preString = "all("; break;
-
-        default: UNREACHABLE(); break;
+      case EOpNegative: preString = "(-"; break;
+      case EOpVectorLogicalNot: preString = "not("; break;
+      case EOpLogicalNot: preString = "(!"; break;
+
+      case EOpPostIncrement: preString = "("; postString = "++)"; break;
+      case EOpPostDecrement: preString = "("; postString = "--)"; break;
+      case EOpPreIncrement: preString = "(++"; break;
+      case EOpPreDecrement: preString = "(--"; break;
+
+      case EOpRadians:
+        preString = "radians(";
+        break;
+      case EOpDegrees:
+        preString = "degrees(";
+        break;
+      case EOpSin:
+        preString = "sin(";
+        break;
+      case EOpCos:
+        preString = "cos(";
+        break;
+      case EOpTan:
+        preString = "tan(";
+        break;
+      case EOpAsin:
+        preString = "asin(";
+        break;
+      case EOpAcos:
+        preString = "acos(";
+        break;
+      case EOpAtan:
+        preString = "atan(";
+        break;
+
+      case EOpExp:
+        preString = "exp(";
+        break;
+      case EOpLog:
+        preString = "log(";
+        break;
+      case EOpExp2:
+        preString = "exp2(";
+        break;
+      case EOpLog2:
+        preString = "log2(";
+        break;
+      case EOpSqrt:
+        preString = "sqrt(";
+        break;
+      case EOpInverseSqrt:
+        preString = "inversesqrt(";
+        break;
+
+      case EOpAbs:
+        preString = "abs(";
+        break;
+      case EOpSign:
+        preString = "sign(";
+        break;
+      case EOpFloor:
+        preString = "floor(";
+        break;
+      case EOpCeil:
+        preString = "ceil(";
+        break;
+      case EOpFract:
+        preString = "fract(";
+        break;
+
+      case EOpLength:
+        preString = "length(";
+        break;
+      case EOpNormalize:
+        preString = "normalize(";
+        break;
+
+      case EOpDFdx:
+        preString = "dFdx(";
+        break;
+      case EOpDFdy:
+        preString = "dFdy(";
+        break;
+      case EOpFwidth:
+        preString = "fwidth(";
+        break;
+
+      case EOpAny:
+        preString = "any(";
+        break;
+      case EOpAll:
+        preString = "all(";
+        break;
+
+      default:
+        UNREACHABLE();
     }
 
     if (visit == PreVisit && node->getUseEmulatedFunction())
@@ -411,9 +498,9 @@ bool TOutputGLSLBase::visitUnary(Visit visit, TIntermUnary* node)
     return true;
 }
 
-bool TOutputGLSLBase::visitSelection(Visit visit, TIntermSelection* node)
+bool TOutputGLSLBase::visitSelection(Visit visit, TIntermSelection *node)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
 
     if (node->usesTernaryOperator())
     {
@@ -448,202 +535,281 @@ bool TOutputGLSLBase::visitSelection(Visit visit, TIntermSelection* node)
     return false;
 }
 
-bool TOutputGLSLBase::visitAggregate(Visit visit, TIntermAggregate* node)
+bool TOutputGLSLBase::visitAggregate(Visit visit, TIntermAggregate *node)
 {
     bool visitChildren = true;
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
     TString preString;
-    bool delayedWrite = false;
+    bool useEmulatedFunction = (visit == PreVisit && node->getUseEmulatedFunction());
     switch (node->getOp())
     {
-        case EOpSequence: {
-            // Scope the sequences except when at the global scope.
-            if (depth > 0) out << "{\n";
-
-            incrementDepth(node);
-            const TIntermSequence& sequence = node->getSequence();
-            for (TIntermSequence::const_iterator iter = sequence.begin();
-                 iter != sequence.end(); ++iter)
-            {
-                TIntermNode* node = *iter;
-                ASSERT(node != NULL);
-                node->traverse(this);
+      case EOpSequence:
+        // Scope the sequences except when at the global scope.
+        if (mDepth > 0)
+        {
+            out << "{\n";
+        }
 
-                if (isSingleStatement(node))
-                    out << ";\n";
-            }
-            decrementDepth();
+        incrementDepth(node);
+        for (TIntermSequence::const_iterator iter = node->getSequence()->begin();
+             iter != node->getSequence()->end(); ++iter)
+        {
+            TIntermNode *node = *iter;
+            ASSERT(node != NULL);
+            node->traverse(this);
 
-            // Scope the sequences except when at the global scope.
-            if (depth > 0) out << "}\n";
-            visitChildren = false;
-            break;
+            if (isSingleStatement(node))
+                out << ";\n";
         }
-        case EOpPrototype: {
-            // Function declaration.
-            ASSERT(visit == PreVisit);
-            writeVariableType(node->getType());
-            out << " " << hashName(node->getName());
+        decrementDepth();
 
-            out << "(";
-            writeFunctionParameters(node->getSequence());
-            out << ")";
+        // Scope the sequences except when at the global scope.
+        if (mDepth > 0)
+        {
+            out << "}\n";
+        }
+        visitChildren = false;
+        break;
+      case EOpPrototype:
+        // Function declaration.
+        ASSERT(visit == PreVisit);
+        writeVariableType(node->getType());
+        out << " " << hashName(node->getName());
+
+        out << "(";
+        writeFunctionParameters(*(node->getSequence()));
+        out << ")";
 
-            visitChildren = false;
-            break;
+        visitChildren = false;
+        break;
+      case EOpFunction: {
+        // Function definition.
+        ASSERT(visit == PreVisit);
+        writeVariableType(node->getType());
+        out << " " << hashFunctionName(node->getName());
+
+        incrementDepth(node);
+        // Function definition node contains one or two children nodes
+        // representing function parameters and function body. The latter
+        // is not present in case of empty function bodies.
+        const TIntermSequence &sequence = *(node->getSequence());
+        ASSERT((sequence.size() == 1) || (sequence.size() == 2));
+        TIntermSequence::const_iterator seqIter = sequence.begin();
+
+        // Traverse function parameters.
+        TIntermAggregate *params = (*seqIter)->getAsAggregate();
+        ASSERT(params != NULL);
+        ASSERT(params->getOp() == EOpParameters);
+        params->traverse(this);
+
+        // Traverse function body.
+        TIntermAggregate *body = ++seqIter != sequence.end() ?
+            (*seqIter)->getAsAggregate() : NULL;
+        visitCodeBlock(body);
+        decrementDepth();
+
+        // Fully processed; no need to visit children.
+        visitChildren = false;
+        break;
+      }
+      case EOpFunctionCall:
+        // Function call.
+        if (visit == PreVisit)
+            out << hashFunctionName(node->getName()) << "(";
+        else if (visit == InVisit)
+            out << ", ";
+        else
+            out << ")";
+        break;
+      case EOpParameters:
+        // Function parameters.
+        ASSERT(visit == PreVisit);
+        out << "(";
+        writeFunctionParameters(*(node->getSequence()));
+        out << ")";
+        visitChildren = false;
+        break;
+      case EOpDeclaration:
+        // Variable declaration.
+        if (visit == PreVisit)
+        {
+            const TIntermSequence &sequence = *(node->getSequence());
+            const TIntermTyped *variable = sequence.front()->getAsTyped();
+            writeVariableType(variable->getType());
+            out << " ";
+            mDeclaringVariables = true;
         }
-        case EOpFunction: {
-            // Function definition.
-            ASSERT(visit == PreVisit);
-            writeVariableType(node->getType());
-            out << " " << hashFunctionName(node->getName());
-
-            incrementDepth(node);
-            // Function definition node contains one or two children nodes
-            // representing function parameters and function body. The latter
-            // is not present in case of empty function bodies.
-            const TIntermSequence& sequence = node->getSequence();
-            ASSERT((sequence.size() == 1) || (sequence.size() == 2));
-            TIntermSequence::const_iterator seqIter = sequence.begin();
-
-            // Traverse function parameters.
-            TIntermAggregate* params = (*seqIter)->getAsAggregate();
-            ASSERT(params != NULL);
-            ASSERT(params->getOp() == EOpParameters);
-            params->traverse(this);
-
-            // Traverse function body.
-            TIntermAggregate* body = ++seqIter != sequence.end() ?
-                (*seqIter)->getAsAggregate() : NULL;
-            visitCodeBlock(body);
-            decrementDepth();
- 
-            // Fully processed; no need to visit children.
-            visitChildren = false;
-            break;
+        else if (visit == InVisit)
+        {
+            out << ", ";
+            mDeclaringVariables = true;
         }
-        case EOpFunctionCall:
-            // Function call.
-            if (visit == PreVisit)
-            {
-                out << hashFunctionName(node->getName()) << "(";
-            }
-            else if (visit == InVisit)
-            {
-                out << ", ";
-            }
-            else
-            {
-                out << ")";
-            }
-            break;
-        case EOpParameters: {
-            // Function parameters.
+        else
+        {
+            mDeclaringVariables = false;
+        }
+        break;
+      case EOpInvariantDeclaration: {
+            // Invariant declaration.
             ASSERT(visit == PreVisit);
-            out << "(";
-            writeFunctionParameters(node->getSequence());
-            out << ")";
+            const TIntermSequence *sequence = node->getSequence();
+            ASSERT(sequence && sequence->size() == 1);
+            const TIntermSymbol *symbol = sequence->front()->getAsSymbolNode();
+            ASSERT(symbol);
+            out << "invariant " << symbol->getSymbol() << ";";
             visitChildren = false;
             break;
         }
-        case EOpDeclaration: {
-            // Variable declaration.
-            if (visit == PreVisit)
-            {
-                const TIntermSequence& sequence = node->getSequence();
-                const TIntermTyped* variable = sequence.front()->getAsTyped();
-                writeVariableType(variable->getType());
-                out << " ";
-                mDeclaringVariables = true;
-            }
-            else if (visit == InVisit)
-            {
-                out << ", ";
-                mDeclaringVariables = true;
-            }
-            else
-            {
-                mDeclaringVariables = false;
-            }
-            break;
+      case EOpConstructFloat:
+        writeTriplet(visit, "float(", NULL, ")");
+        break;
+      case EOpConstructVec2:
+        writeBuiltInFunctionTriplet(visit, "vec2(", false);
+        break;
+      case EOpConstructVec3:
+        writeBuiltInFunctionTriplet(visit, "vec3(", false);
+        break;
+      case EOpConstructVec4:
+        writeBuiltInFunctionTriplet(visit, "vec4(", false);
+        break;
+      case EOpConstructBool:
+        writeTriplet(visit, "bool(", NULL, ")");
+        break;
+      case EOpConstructBVec2:
+        writeBuiltInFunctionTriplet(visit, "bvec2(", false);
+        break;
+      case EOpConstructBVec3:
+        writeBuiltInFunctionTriplet(visit, "bvec3(", false);
+        break;
+      case EOpConstructBVec4:
+        writeBuiltInFunctionTriplet(visit, "bvec4(", false);
+        break;
+      case EOpConstructInt:
+        writeTriplet(visit, "int(", NULL, ")");
+        break;
+      case EOpConstructIVec2:
+        writeBuiltInFunctionTriplet(visit, "ivec2(", false);
+        break;
+      case EOpConstructIVec3:
+        writeBuiltInFunctionTriplet(visit, "ivec3(", false);
+        break;
+      case EOpConstructIVec4:
+        writeBuiltInFunctionTriplet(visit, "ivec4(", false);
+        break;
+      case EOpConstructMat2:
+        writeBuiltInFunctionTriplet(visit, "mat2(", false);
+        break;
+      case EOpConstructMat3:
+        writeBuiltInFunctionTriplet(visit, "mat3(", false);
+        break;
+      case EOpConstructMat4:
+        writeBuiltInFunctionTriplet(visit, "mat4(", false);
+        break;
+      case EOpConstructStruct:
+        if (visit == PreVisit)
+        {
+            const TType &type = node->getType();
+            ASSERT(type.getBasicType() == EbtStruct);
+            out << hashName(type.getStruct()->name()) << "(";
         }
-        case EOpConstructFloat: writeTriplet(visit, "float(", NULL, ")"); break;
-        case EOpConstructVec2: writeTriplet(visit, "vec2(", ", ", ")"); break;
-        case EOpConstructVec3: writeTriplet(visit, "vec3(", ", ", ")"); break;
-        case EOpConstructVec4: writeTriplet(visit, "vec4(", ", ", ")"); break;
-        case EOpConstructBool: writeTriplet(visit, "bool(", NULL, ")"); break;
-        case EOpConstructBVec2: writeTriplet(visit, "bvec2(", ", ", ")"); break;
-        case EOpConstructBVec3: writeTriplet(visit, "bvec3(", ", ", ")"); break;
-        case EOpConstructBVec4: writeTriplet(visit, "bvec4(", ", ", ")"); break;
-        case EOpConstructInt: writeTriplet(visit, "int(", NULL, ")"); break;
-        case EOpConstructIVec2: writeTriplet(visit, "ivec2(", ", ", ")"); break;
-        case EOpConstructIVec3: writeTriplet(visit, "ivec3(", ", ", ")"); break;
-        case EOpConstructIVec4: writeTriplet(visit, "ivec4(", ", ", ")"); break;
-        case EOpConstructMat2: writeTriplet(visit, "mat2(", ", ", ")"); break;
-        case EOpConstructMat3: writeTriplet(visit, "mat3(", ", ", ")"); break;
-        case EOpConstructMat4: writeTriplet(visit, "mat4(", ", ", ")"); break;
-        case EOpConstructStruct:
-            if (visit == PreVisit)
-            {
-                const TType& type = node->getType();
-                ASSERT(type.getBasicType() == EbtStruct);
-                out << hashName(type.getStruct()->name()) << "(";
-            }
-            else if (visit == InVisit)
-            {
-                out << ", ";
-            }
-            else
-            {
-                out << ")";
-            }
-            break;
-
-        case EOpLessThan: preString = "lessThan("; delayedWrite = true; break;
-        case EOpGreaterThan: preString = "greaterThan("; delayedWrite = true; break;
-        case EOpLessThanEqual: preString = "lessThanEqual("; delayedWrite = true; break;
-        case EOpGreaterThanEqual: preString = "greaterThanEqual("; delayedWrite = true; break;
-        case EOpVectorEqual: preString = "equal("; delayedWrite = true; break;
-        case EOpVectorNotEqual: preString = "notEqual("; delayedWrite = true; break;
-        case EOpComma: writeTriplet(visit, NULL, ", ", NULL); break;
-
-        case EOpMod: preString = "mod("; delayedWrite = true; break;
-        case EOpPow: preString = "pow("; delayedWrite = true; break;
-        case EOpAtan: preString = "atan("; delayedWrite = true; break;
-        case EOpMin: preString = "min("; delayedWrite = true; break;
-        case EOpMax: preString = "max("; delayedWrite = true; break;
-        case EOpClamp: preString = "clamp("; delayedWrite = true; break;
-        case EOpMix: preString = "mix("; delayedWrite = true; break;
-        case EOpStep: preString = "step("; delayedWrite = true; break;
-        case EOpSmoothStep: preString = "smoothstep("; delayedWrite = true; break;
-
-        case EOpDistance: preString = "distance("; delayedWrite = true; break;
-        case EOpDot: preString = "dot("; delayedWrite = true; break;
-        case EOpCross: preString = "cross("; delayedWrite = true; break;
-        case EOpFaceForward: preString = "faceforward("; delayedWrite = true; break;
-        case EOpReflect: preString = "reflect("; delayedWrite = true; break;
-        case EOpRefract: preString = "refract("; delayedWrite = true; break;
-        case EOpMul: preString = "matrixCompMult("; delayedWrite = true; break;
-
-        default: UNREACHABLE(); break;
+        else if (visit == InVisit)
+        {
+            out << ", ";
+        }
+        else
+        {
+            out << ")";
+        }
+        break;
+
+      case EOpLessThan:
+        writeBuiltInFunctionTriplet(visit, "lessThan(", useEmulatedFunction);
+        break;
+      case EOpGreaterThan:
+        writeBuiltInFunctionTriplet(visit, "greaterThan(", useEmulatedFunction);
+        break;
+      case EOpLessThanEqual:
+        writeBuiltInFunctionTriplet(visit, "lessThanEqual(", useEmulatedFunction);
+        break;
+      case EOpGreaterThanEqual:
+        writeBuiltInFunctionTriplet(visit, "greaterThanEqual(", useEmulatedFunction);
+        break;
+      case EOpVectorEqual:
+        writeBuiltInFunctionTriplet(visit, "equal(", useEmulatedFunction);
+        break;
+      case EOpVectorNotEqual:
+        writeBuiltInFunctionTriplet(visit, "notEqual(", useEmulatedFunction);
+        break;
+      case EOpComma:
+        writeTriplet(visit, NULL, ", ", NULL);
+        break;
+
+      case EOpMod:
+        writeBuiltInFunctionTriplet(visit, "mod(", useEmulatedFunction);
+        break;
+      case EOpPow:
+        writeBuiltInFunctionTriplet(visit, "pow(", useEmulatedFunction);
+        break;
+      case EOpAtan:
+        writeBuiltInFunctionTriplet(visit, "atan(", useEmulatedFunction);
+        break;
+      case EOpMin:
+        writeBuiltInFunctionTriplet(visit, "min(", useEmulatedFunction);
+        break;
+      case EOpMax:
+        writeBuiltInFunctionTriplet(visit, "max(", useEmulatedFunction);
+        break;
+      case EOpClamp:
+        writeBuiltInFunctionTriplet(visit, "clamp(", useEmulatedFunction);
+        break;
+      case EOpMix:
+        writeBuiltInFunctionTriplet(visit, "mix(", useEmulatedFunction);
+        break;
+      case EOpStep:
+        writeBuiltInFunctionTriplet(visit, "step(", useEmulatedFunction);
+        break;
+      case EOpSmoothStep:
+        writeBuiltInFunctionTriplet(visit, "smoothstep(", useEmulatedFunction);
+        break;
+      case EOpDistance:
+        writeBuiltInFunctionTriplet(visit, "distance(", useEmulatedFunction);
+        break;
+      case EOpDot:
+        writeBuiltInFunctionTriplet(visit, "dot(", useEmulatedFunction);
+        break;
+      case EOpCross:
+        writeBuiltInFunctionTriplet(visit, "cross(", useEmulatedFunction);
+        break;
+      case EOpFaceForward:
+        writeBuiltInFunctionTriplet(visit, "faceforward(", useEmulatedFunction);
+        break;
+      case EOpReflect:
+        writeBuiltInFunctionTriplet(visit, "reflect(", useEmulatedFunction);
+        break;
+      case EOpRefract:
+        writeBuiltInFunctionTriplet(visit, "refract(", useEmulatedFunction);
+        break;
+      case EOpMul:
+        writeBuiltInFunctionTriplet(visit, "matrixCompMult(", useEmulatedFunction);
+        break;
+
+      default:
+        UNREACHABLE();
     }
-    if (delayedWrite && visit == PreVisit && node->getUseEmulatedFunction())
-        preString = BuiltInFunctionEmulator::GetEmulatedFunctionName(preString);
-    if (delayedWrite)
-        writeTriplet(visit, preString.c_str(), ", ", ")");
     return visitChildren;
 }
 
-bool TOutputGLSLBase::visitLoop(Visit visit, TIntermLoop* node)
+bool TOutputGLSLBase::visitLoop(Visit visit, TIntermLoop *node)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
 
     incrementDepth(node);
     // Loop header.
     TLoopType loopType = node->getType();
     if (loopType == ELoopFor)  // for loop
     {
-        if (!node->getUnrollFlag()) {
+        if (!node->getUnrollFlag())
+        {
             out << "for (";
             if (node->getInit())
                 node->getInit()->traverse(this);
@@ -657,6 +823,18 @@ bool TOutputGLSLBase::visitLoop(Visit visit, TIntermLoop* node)
                 node->getExpression()->traverse(this);
             out << ")\n";
         }
+        else
+        {
+            // Need to put a one-iteration loop here to handle break.
+            TIntermSequence *declSeq =
+                node->getInit()->getAsAggregate()->getSequence();
+            TIntermSymbol *indexSymbol =
+                (*declSeq)[0]->getAsBinaryNode()->getLeft()->getAsSymbolNode();
+            TString name = hashVariableName(indexSymbol->getSymbol());
+            out << "for (int " << name << " = 0; "
+                << name << " < 1; "
+                << "++" << name << ")\n";
+        }
     }
     else if (loopType == ELoopWhile)  // while loop
     {
@@ -674,15 +852,15 @@ bool TOutputGLSLBase::visitLoop(Visit visit, TIntermLoop* node)
     // Loop body.
     if (node->getUnrollFlag())
     {
-        TLoopIndexInfo indexInfo;
-        mLoopUnroll.FillLoopIndexInfo(node, indexInfo);
-        mLoopUnroll.Push(indexInfo);
-        while (mLoopUnroll.SatisfiesLoopCondition())
+        out << "{\n";
+        mLoopUnrollStack.push(node);
+        while (mLoopUnrollStack.satisfiesLoopCondition())
         {
             visitCodeBlock(node->getBody());
-            mLoopUnroll.Step();
+            mLoopUnrollStack.step();
         }
-        mLoopUnroll.Pop();
+        mLoopUnrollStack.pop();
+        out << "}\n";
     }
     else
     {
@@ -704,21 +882,31 @@ bool TOutputGLSLBase::visitLoop(Visit visit, TIntermLoop* node)
     return false;
 }
 
-bool TOutputGLSLBase::visitBranch(Visit visit, TIntermBranch* node)
+bool TOutputGLSLBase::visitBranch(Visit visit, TIntermBranch *node)
 {
     switch (node->getFlowOp())
     {
-        case EOpKill: writeTriplet(visit, "discard", NULL, NULL); break;
-        case EOpBreak: writeTriplet(visit, "break", NULL, NULL); break;
-        case EOpContinue: writeTriplet(visit, "continue", NULL, NULL); break;
-        case EOpReturn: writeTriplet(visit, "return ", NULL, NULL); break;
-        default: UNREACHABLE(); break;
+      case EOpKill:
+        writeTriplet(visit, "discard", NULL, NULL);
+        break;
+      case EOpBreak:
+        writeTriplet(visit, "break", NULL, NULL);
+        break;
+      case EOpContinue:
+        writeTriplet(visit, "continue", NULL, NULL);
+        break;
+      case EOpReturn:
+        writeTriplet(visit, "return ", NULL, NULL);
+        break;
+      default:
+        UNREACHABLE();
     }
 
     return true;
 }
 
-void TOutputGLSLBase::visitCodeBlock(TIntermNode* node) {
+void TOutputGLSLBase::visitCodeBlock(TIntermNode *node)
+{
     TInfoSinkBase &out = objSink();
     if (node != NULL)
     {
@@ -734,7 +922,7 @@ void TOutputGLSLBase::visitCodeBlock(TIntermNode* node) {
     }
 }
 
-TString TOutputGLSLBase::getTypeName(const TType& type)
+TString TOutputGLSLBase::getTypeName(const TType &type)
 {
     TInfoSinkBase out;
     if (type.isMatrix())
@@ -746,10 +934,17 @@ TString TOutputGLSLBase::getTypeName(const TType& type)
     {
         switch (type.getBasicType())
         {
-            case EbtFloat: out << "vec"; break;
-            case EbtInt: out << "ivec"; break;
-            case EbtBool: out << "bvec"; break;
-            default: UNREACHABLE(); break;
+          case EbtFloat:
+            out << "vec";
+            break;
+          case EbtInt:
+            out << "ivec";
+            break;
+          case EbtBool:
+            out << "bvec";
+            break;
+          default:
+            UNREACHABLE();
         }
         out << type.getNominalSize();
     }
@@ -763,7 +958,7 @@ TString TOutputGLSLBase::getTypeName(const TType& type)
     return TString(out.c_str());
 }
 
-TString TOutputGLSLBase::hashName(const TString& name)
+TString TOutputGLSLBase::hashName(const TString &name)
 {
     if (mHashFunction == NULL || name.empty())
         return name;
@@ -775,35 +970,41 @@ TString TOutputGLSLBase::hashName(const TString& name)
     return hashedName;
 }
 
-TString TOutputGLSLBase::hashVariableName(const TString& name)
+TString TOutputGLSLBase::hashVariableName(const TString &name)
 {
-    if (mSymbolTable.findBuiltIn(name) != NULL)
+    if (mSymbolTable.findBuiltIn(name, mShaderVersion) != NULL)
         return name;
     return hashName(name);
 }
 
-TString TOutputGLSLBase::hashFunctionName(const TString& mangled_name)
+TString TOutputGLSLBase::hashFunctionName(const TString &mangled_name)
 {
     TString name = TFunction::unmangleName(mangled_name);
-    if (mSymbolTable.findBuiltIn(mangled_name) != NULL || name == "main")
-        return name;
+    if (mSymbolTable.findBuiltIn(mangled_name, mShaderVersion) != NULL || name == "main")
+        return translateTextureFunction(name);
     return hashName(name);
 }
 
-bool TOutputGLSLBase::structDeclared(const TStructure* structure) const
+bool TOutputGLSLBase::structDeclared(const TStructure *structure) const
 {
-    return mDeclaredStructs.find(structure->name()) != mDeclaredStructs.end();
+    ASSERT(structure);
+    if (structure->name().empty())
+    {
+        return false;
+    }
+
+    return (mDeclaredStructs.count(structure->uniqueId()) > 0);
 }
 
-void TOutputGLSLBase::declareStruct(const TStructure* structure)
+void TOutputGLSLBase::declareStruct(const TStructure *structure)
 {
-    TInfoSinkBase& out = objSink();
+    TInfoSinkBase &out = objSink();
 
     out << "struct " << hashName(structure->name()) << "{\n";
-    const TFieldList& fields = structure->fields();
+    const TFieldList &fields = structure->fields();
     for (size_t i = 0; i < fields.size(); ++i)
     {
-        const TField* field = fields[i];
+        const TField *field = fields[i];
         if (writeVariablePrecision(field->type()->getPrecision()))
             out << " ";
         out << getTypeName(*field->type()) << " " << hashName(field->name());
@@ -812,6 +1013,5 @@ void TOutputGLSLBase::declareStruct(const TStructure* structure)
         out << ";\n";
     }
     out << "}";
-
-    mDeclaredStructs.insert(structure->name());
 }
+
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.h b/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.h
index 76bec4de61..e5174f5660 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.h
+++ b/src/3rdparty/angle/src/compiler/translator/OutputGLSLBase.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -9,71 +9,75 @@
 
 #include <set>
 
-#include "compiler/translator/ForLoopUnroll.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
+#include "compiler/translator/LoopInfo.h"
 #include "compiler/translator/ParseContext.h"
 
 class TOutputGLSLBase : public TIntermTraverser
 {
-public:
-    TOutputGLSLBase(TInfoSinkBase& objSink,
+  public:
+    TOutputGLSLBase(TInfoSinkBase &objSink,
                     ShArrayIndexClampingStrategy clampingStrategy,
                     ShHashFunction64 hashFunction,
-                    NameMap& nameMap,
-                    TSymbolTable& symbolTable);
-
-protected:
-    TInfoSinkBase& objSink() { return mObjSink; }
-    void writeTriplet(Visit visit, const char* preStr, const char* inStr, const char* postStr);
-    void writeVariableType(const TType& type);
+                    NameMap &nameMap,
+                    TSymbolTable& symbolTable,
+                    int shaderVersion);
+
+  protected:
+    TInfoSinkBase &objSink() { return mObjSink; }
+    void writeTriplet(Visit visit, const char *preStr, const char *inStr, const char *postStr);
+    void writeVariableType(const TType &type);
     virtual bool writeVariablePrecision(TPrecision precision) = 0;
-    void writeFunctionParameters(const TIntermSequence& args);
-    const ConstantUnion* writeConstantUnion(const TType& type, const ConstantUnion* pConstUnion);
-    TString getTypeName(const TType& type);
-
-    virtual void visitSymbol(TIntermSymbol* node);
-    virtual void visitConstantUnion(TIntermConstantUnion* node);
-    virtual bool visitBinary(Visit visit, TIntermBinary* node);
-    virtual bool visitUnary(Visit visit, TIntermUnary* node);
-    virtual bool visitSelection(Visit visit, TIntermSelection* node);
-    virtual bool visitAggregate(Visit visit, TIntermAggregate* node);
-    virtual bool visitLoop(Visit visit, TIntermLoop* node);
-    virtual bool visitBranch(Visit visit, TIntermBranch* node);
+    void writeFunctionParameters(const TIntermSequence &args);
+    const ConstantUnion *writeConstantUnion(const TType &type, const ConstantUnion *pConstUnion);
+    TString getTypeName(const TType &type);
 
-    void visitCodeBlock(TIntermNode* node);
+    virtual void visitSymbol(TIntermSymbol *node);
+    virtual void visitConstantUnion(TIntermConstantUnion *node);
+    virtual bool visitBinary(Visit visit, TIntermBinary *node);
+    virtual bool visitUnary(Visit visit, TIntermUnary *node);
+    virtual bool visitSelection(Visit visit, TIntermSelection *node);
+    virtual bool visitAggregate(Visit visit, TIntermAggregate *node);
+    virtual bool visitLoop(Visit visit, TIntermLoop *node);
+    virtual bool visitBranch(Visit visit, TIntermBranch *node);
 
+    void visitCodeBlock(TIntermNode *node);
 
     // Return the original name if hash function pointer is NULL;
     // otherwise return the hashed name.
-    TString hashName(const TString& name);
+    TString hashName(const TString &name);
     // Same as hashName(), but without hashing built-in variables.
-    TString hashVariableName(const TString& name);
+    TString hashVariableName(const TString &name);
     // Same as hashName(), but without hashing built-in functions.
-    TString hashFunctionName(const TString& mangled_name);
+    TString hashFunctionName(const TString &mangled_name);
+    // Used to translate function names for differences between ESSL and GLSL
+    virtual TString translateTextureFunction(TString &name) { return name; }
 
-private:
-    bool structDeclared(const TStructure* structure) const;
-    void declareStruct(const TStructure* structure);
+  private:
+    bool structDeclared(const TStructure *structure) const;
+    void declareStruct(const TStructure *structure);
 
-    TInfoSinkBase& mObjSink;
+    void writeBuiltInFunctionTriplet(Visit visit, const char *preStr, bool useEmulatedFunction);
+
+    TInfoSinkBase &mObjSink;
     bool mDeclaringVariables;
 
-    // Structs are declared as the tree is traversed. This set contains all
-    // the structs already declared. It is maintained so that a struct is
-    // declared only once.
-    typedef std::set<TString> DeclaredStructs;
-    DeclaredStructs mDeclaredStructs;
+    // This set contains all the ids of the structs from every scope.
+    std::set<int> mDeclaredStructs;
 
-    ForLoopUnroll mLoopUnroll;
+    // Stack of loops that need to be unrolled.
+    TLoopStack mLoopUnrollStack;
 
     ShArrayIndexClampingStrategy mClampingStrategy;
 
     // name hashing.
     ShHashFunction64 mHashFunction;
 
-    NameMap& mNameMap;
+    NameMap &mNameMap;
+
+    TSymbolTable &mSymbolTable;
 
-    TSymbolTable& mSymbolTable;
+    const int mShaderVersion;
 };
 
 #endif  // CROSSCOMPILERGLSL_OUTPUTGLSLBASE_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputHLSL.cpp b/src/3rdparty/angle/src/compiler/translator/OutputHLSL.cpp
index af996df719..a5ea71599d 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputHLSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/OutputHLSL.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -7,13 +7,21 @@
 #include "compiler/translator/OutputHLSL.h"
 
 #include "common/angleutils.h"
+#include "common/utilities.h"
+#include "common/blocklayout.h"
 #include "compiler/translator/compilerdebug.h"
-#include "compiler/translator/DetectDiscontinuity.h"
 #include "compiler/translator/InfoSink.h"
+#include "compiler/translator/DetectDiscontinuity.h"
 #include "compiler/translator/SearchSymbol.h"
 #include "compiler/translator/UnfoldShortCircuit.h"
+#include "compiler/translator/FlagStd140Structs.h"
 #include "compiler/translator/NodeSearch.h"
 #include "compiler/translator/RewriteElseBlocks.h"
+#include "compiler/translator/UtilsHLSL.h"
+#include "compiler/translator/util.h"
+#include "compiler/translator/UniformHLSL.h"
+#include "compiler/translator/StructureHLSL.h"
+#include "compiler/translator/TranslatorHLSL.h"
 
 #include <algorithm>
 #include <cfloat>
@@ -22,27 +30,78 @@
 namespace sh
 {
 
-OutputHLSL::OutputHLSL(TParseContext &context, const ShBuiltInResources& resources, ShShaderOutput outputType)
-    : TIntermTraverser(true, true, true), mContext(context), mOutputType(outputType)
+TString OutputHLSL::TextureFunction::name() const
+{
+    TString name = "gl_texture";
+
+    if (IsSampler2D(sampler))
+    {
+        name += "2D";
+    }
+    else if (IsSampler3D(sampler))
+    {
+        name += "3D";
+    }
+    else if (IsSamplerCube(sampler))
+    {
+        name += "Cube";
+    }
+    else UNREACHABLE();
+
+    if (proj)
+    {
+        name += "Proj";
+    }
+
+    if (offset)
+    {
+        name += "Offset";
+    }
+
+    switch(method)
+    {
+      case IMPLICIT:                  break;
+      case BIAS:                      break;   // Extra parameter makes the signature unique
+      case LOD:      name += "Lod";   break;
+      case LOD0:     name += "Lod0";  break;
+      case LOD0BIAS: name += "Lod0";  break;   // Extra parameter makes the signature unique
+      case SIZE:     name += "Size";  break;
+      case FETCH:    name += "Fetch"; break;
+      case GRAD:     name += "Grad";  break;
+      default: UNREACHABLE();
+    }
+
+    return name + "(";
+}
+
+bool OutputHLSL::TextureFunction::operator<(const TextureFunction &rhs) const
+{
+    if (sampler < rhs.sampler) return true;
+    if (sampler > rhs.sampler) return false;
+
+    if (coords < rhs.coords)   return true;
+    if (coords > rhs.coords)   return false;
+
+    if (!proj && rhs.proj)     return true;
+    if (proj && !rhs.proj)     return false;
+
+    if (!offset && rhs.offset) return true;
+    if (offset && !rhs.offset) return false;
+
+    if (method < rhs.method)   return true;
+    if (method > rhs.method)   return false;
+
+    return false;
+}
+
+OutputHLSL::OutputHLSL(TParseContext &context, TranslatorHLSL *parentTranslator)
+    : TIntermTraverser(true, true, true),
+      mContext(context),
+      mOutputType(parentTranslator->getOutputType())
 {
     mUnfoldShortCircuit = new UnfoldShortCircuit(context, this);
     mInsideFunction = false;
 
-    mUsesTexture2D = false;
-    mUsesTexture2D_bias = false;
-    mUsesTexture2DProj = false;
-    mUsesTexture2DProj_bias = false;
-    mUsesTexture2DProjLod = false;
-    mUsesTexture2DLod = false;
-    mUsesTextureCube = false;
-    mUsesTextureCube_bias = false;
-    mUsesTextureCubeLod = false;
-    mUsesTexture2DLod0 = false;
-    mUsesTexture2DLod0_bias = false;
-    mUsesTexture2DProjLod0 = false;
-    mUsesTexture2DProjLod0_bias = false;
-    mUsesTextureCubeLod0 = false;
-    mUsesTextureCubeLod0_bias = false;
     mUsesFragColor = false;
     mUsesFragData = false;
     mUsesDepthRange = false;
@@ -68,50 +127,57 @@ OutputHLSL::OutputHLSL(TParseContext &context, const ShBuiltInResources& resourc
     mUsesAtan2_3 = false;
     mUsesAtan2_4 = false;
     mUsesDiscardRewriting = false;
+    mUsesNestedBreak = false;
 
+    const ShBuiltInResources &resources = parentTranslator->getResources();
     mNumRenderTargets = resources.EXT_draw_buffers ? resources.MaxDrawBuffers : 1;
 
-    mScopeDepth = 0;
-
     mUniqueIndex = 0;
 
     mContainsLoopDiscontinuity = false;
     mOutputLod0Function = false;
     mInsideDiscontinuousLoop = false;
+    mNestedLoopDepth = 0;
 
     mExcessiveLoopIndex = NULL;
 
+    mStructureHLSL = new StructureHLSL;
+    mUniformHLSL = new UniformHLSL(mStructureHLSL, parentTranslator);
+
     if (mOutputType == SH_HLSL9_OUTPUT)
     {
-        if (mContext.shaderType == SH_FRAGMENT_SHADER)
+        if (mContext.shaderType == GL_FRAGMENT_SHADER)
         {
-            mUniformRegister = 3;   // Reserve registers for dx_DepthRange, dx_ViewCoords and dx_DepthFront
+            // Reserve registers for dx_DepthRange, dx_ViewCoords and dx_DepthFront
+            mUniformHLSL->reserveUniformRegisters(3);
         }
         else
         {
-            mUniformRegister = 2;   // Reserve registers for dx_DepthRange and dx_ViewAdjust
+            // Reserve registers for dx_DepthRange and dx_ViewAdjust
+            mUniformHLSL->reserveUniformRegisters(2);
         }
     }
-    else
-    {
-        mUniformRegister = 0;
-    }
 
-    mSamplerRegister = 0;
+    // Reserve registers for the default uniform block and driver constants
+    mUniformHLSL->reserveInterfaceBlockRegisters(2);
 }
 
 OutputHLSL::~OutputHLSL()
 {
-    delete mUnfoldShortCircuit;
+    SafeDelete(mUnfoldShortCircuit);
+    SafeDelete(mStructureHLSL);
+    SafeDelete(mUniformHLSL);
 }
 
 void OutputHLSL::output()
 {
-    mContainsLoopDiscontinuity = mContext.shaderType == SH_FRAGMENT_SHADER && containsLoopDiscontinuity(mContext.treeRoot);
+    mContainsLoopDiscontinuity = mContext.shaderType == GL_FRAGMENT_SHADER && containsLoopDiscontinuity(mContext.treeRoot);
+    const std::vector<TIntermTyped*> &flaggedStructs = FlagStd140ValueStructs(mContext.treeRoot);
+    makeFlaggedStructMaps(flaggedStructs);
 
     // Work around D3D9 bug that would manifest in vertex shaders with selection blocks which
     // use a vertex attribute as a condition, and some related computation in the else block.
-    if (mOutputType == SH_HLSL9_OUTPUT && mContext.shaderType == SH_VERTEX_SHADER)
+    if (mOutputType == SH_HLSL9_OUTPUT && mContext.shaderType == GL_VERTEX_SHADER)
     {
         RewriteElseBlocks(mContext.treeRoot);
     }
@@ -123,72 +189,120 @@ void OutputHLSL::output()
     mContext.infoSink().obj << mBody.c_str();
 }
 
+void OutputHLSL::makeFlaggedStructMaps(const std::vector<TIntermTyped *> &flaggedStructs)
+{
+    for (unsigned int structIndex = 0; structIndex < flaggedStructs.size(); structIndex++)
+    {
+        TIntermTyped *flaggedNode = flaggedStructs[structIndex];
+
+        // This will mark the necessary block elements as referenced
+        flaggedNode->traverse(this);
+        TString structName(mBody.c_str());
+        mBody.erase();
+
+        mFlaggedStructOriginalNames[flaggedNode] = structName;
+
+        for (size_t pos = structName.find('.'); pos != std::string::npos; pos = structName.find('.'))
+        {
+            structName.erase(pos, 1);
+        }
+
+        mFlaggedStructMappedNames[flaggedNode] = "map" + structName;
+    }
+}
+
 TInfoSinkBase &OutputHLSL::getBodyStream()
 {
     return mBody;
 }
 
-const ActiveUniforms &OutputHLSL::getUniforms()
+const std::map<std::string, unsigned int> &OutputHLSL::getInterfaceBlockRegisterMap() const
 {
-    return mActiveUniforms;
+    return mUniformHLSL->getInterfaceBlockRegisterMap();
+}
+
+const std::map<std::string, unsigned int> &OutputHLSL::getUniformRegisterMap() const
+{
+    return mUniformHLSL->getUniformRegisterMap();
 }
 
 int OutputHLSL::vectorSize(const TType &type) const
 {
-    int elementSize = type.isMatrix() ? type.getNominalSize() : 1;
+    int elementSize = type.isMatrix() ? type.getCols() : 1;
     int arraySize = type.isArray() ? type.getArraySize() : 1;
 
     return elementSize * arraySize;
 }
 
-void OutputHLSL::header()
+TString OutputHLSL::structInitializerString(int indent, const TStructure &structure, const TString &rhsStructName)
 {
-    ShShaderType shaderType = mContext.shaderType;
-    TInfoSinkBase &out = mHeader;
+    TString init;
 
-    for (StructDeclarations::iterator structDeclaration = mStructDeclarations.begin(); structDeclaration != mStructDeclarations.end(); structDeclaration++)
+    TString preIndentString;
+    TString fullIndentString;
+
+    for (int spaces = 0; spaces < (indent * 4); spaces++)
     {
-        out << *structDeclaration;
+        preIndentString += ' ';
     }
 
-    for (Constructors::iterator constructor = mConstructors.begin(); constructor != mConstructors.end(); constructor++)
+    for (int spaces = 0; spaces < ((indent+1) * 4); spaces++)
     {
-        out << *constructor;
+        fullIndentString += ' ';
     }
 
-    TString uniforms;
-    TString varyings;
-    TString attributes;
+    init += preIndentString + "{\n";
 
-    for (ReferencedSymbols::const_iterator uniform = mReferencedUniforms.begin(); uniform != mReferencedUniforms.end(); uniform++)
+    const TFieldList &fields = structure.fields();
+    for (unsigned int fieldIndex = 0; fieldIndex < fields.size(); fieldIndex++)
     {
-        const TType &type = uniform->second->getType();
-        const TString &name = uniform->second->getSymbol();
+        const TField &field = *fields[fieldIndex];
+        const TString &fieldName = rhsStructName + "." + Decorate(field.name());
+        const TType &fieldType = *field.type();
 
-        if (mOutputType == SH_HLSL11_OUTPUT && IsSampler(type.getBasicType()))   // Also declare the texture
+        if (fieldType.getStruct())
         {
-            int index = samplerRegister(mReferencedUniforms[name]);
-
-            uniforms += "uniform SamplerState sampler_" + decorateUniform(name, type) + arrayString(type) + 
-                        " : register(s" + str(index) + ");\n";
-
-            uniforms += "uniform " + textureString(type) + " texture_" + decorateUniform(name, type) + arrayString(type) + 
-                        " : register(t" + str(index) + ");\n";
+            init += structInitializerString(indent + 1, *fieldType.getStruct(), fieldName);
         }
         else
         {
-            uniforms += "uniform " + typeString(type) + " " + decorateUniform(name, type) + arrayString(type) + 
-                        " : register(" + registerString(mReferencedUniforms[name]) + ");\n";
+            init += fullIndentString + fieldName + ",\n";
         }
     }
 
+    init += preIndentString + "}" + (indent == 0 ? ";" : ",") + "\n";
+
+    return init;
+}
+
+void OutputHLSL::header()
+{
+    TInfoSinkBase &out = mHeader;
+
+    TString varyings;
+    TString attributes;
+    TString flaggedStructs;
+
+    for (std::map<TIntermTyped*, TString>::const_iterator flaggedStructIt = mFlaggedStructMappedNames.begin(); flaggedStructIt != mFlaggedStructMappedNames.end(); flaggedStructIt++)
+    {
+        TIntermTyped *structNode = flaggedStructIt->first;
+        const TString &mappedName = flaggedStructIt->second;
+        const TStructure &structure = *structNode->getType().getStruct();
+        const TString &originalName = mFlaggedStructOriginalNames[structNode];
+
+        flaggedStructs += "static " + Decorate(structure.name()) + " " + mappedName + " =\n";
+        flaggedStructs += structInitializerString(0, structure, originalName);
+        flaggedStructs += "\n";
+    }
+
     for (ReferencedSymbols::const_iterator varying = mReferencedVaryings.begin(); varying != mReferencedVaryings.end(); varying++)
     {
         const TType &type = varying->second->getType();
         const TString &name = varying->second->getSymbol();
 
         // Program linking depends on this exact format
-        varyings += "static " + typeString(type) + " " + decorate(name) + arrayString(type) + " = " + initializer(type) + ";\n";
+        varyings += "static " + InterpolationString(type.getQualifier()) + " " + TypeString(type) + " " +
+                    Decorate(name) + ArrayString(type) + " = " + initializer(type) + ";\n";
     }
 
     for (ReferencedSymbols::const_iterator attribute = mReferencedAttributes.begin(); attribute != mReferencedAttributes.end(); attribute++)
@@ -196,36 +310,62 @@ void OutputHLSL::header()
         const TType &type = attribute->second->getType();
         const TString &name = attribute->second->getSymbol();
 
-        attributes += "static " + typeString(type) + " " + decorate(name) + arrayString(type) + " = " + initializer(type) + ";\n";
+        attributes += "static " + TypeString(type) + " " + Decorate(name) + ArrayString(type) + " = " + initializer(type) + ";\n";
     }
 
+    out << mStructureHLSL->structsHeader();
+
+    out << mUniformHLSL->uniformsHeader(mOutputType, mReferencedUniforms);
+    out << mUniformHLSL->interfaceBlocksHeader(mReferencedInterfaceBlocks);
+
     if (mUsesDiscardRewriting)
     {
         out << "#define ANGLE_USES_DISCARD_REWRITING" << "\n";
     }
 
-    if (shaderType == SH_FRAGMENT_SHADER)
+    if (mUsesNestedBreak)
+    {
+        out << "#define ANGLE_USES_NESTED_BREAK" << "\n";
+    }
+
+    if (mContext.shaderType == GL_FRAGMENT_SHADER)
     {
         TExtensionBehavior::const_iterator iter = mContext.extensionBehavior().find("GL_EXT_draw_buffers");
         const bool usingMRTExtension = (iter != mContext.extensionBehavior().end() && (iter->second == EBhEnable || iter->second == EBhRequire));
 
-        const unsigned int numColorValues = usingMRTExtension ? mNumRenderTargets : 1;
-
         out << "// Varyings\n";
         out <<  varyings;
-        out << "\n"
-               "static float4 gl_Color[" << numColorValues << "] =\n"
-               "{\n";
-        for (unsigned int i = 0; i < numColorValues; i++)
+        out << "\n";
+
+        if (mContext.getShaderVersion() >= 300)
         {
-            out << "    float4(0, 0, 0, 0)";
-            if (i + 1 != numColorValues)
+            for (ReferencedSymbols::const_iterator outputVariableIt = mReferencedOutputVariables.begin(); outputVariableIt != mReferencedOutputVariables.end(); outputVariableIt++)
             {
-                out << ",";
+                const TString &variableName = outputVariableIt->first;
+                const TType &variableType = outputVariableIt->second->getType();
+
+                out << "static " + TypeString(variableType) + " out_" + variableName + ArrayString(variableType) +
+                       " = " + initializer(variableType) + ";\n";
             }
-            out << "\n";
         }
-        out << "};\n";
+        else
+        {
+            const unsigned int numColorValues = usingMRTExtension ? mNumRenderTargets : 1;
+
+            out << "static float4 gl_Color[" << numColorValues << "] =\n"
+                   "{\n";
+            for (unsigned int i = 0; i < numColorValues; i++)
+            {
+                out << "    float4(0, 0, 0, 0)";
+                if (i + 1 != numColorValues)
+                {
+                    out << ",";
+                }
+                out << "\n";
+            }
+
+            out << "};\n";
+        }
 
         if (mUsesFragDepth)
         {
@@ -307,302 +447,13 @@ void OutputHLSL::header()
             out << "static gl_DepthRangeParameters gl_DepthRange = {dx_DepthRange.x, dx_DepthRange.y, dx_DepthRange.z};\n"
                    "\n";
         }
-        
-        out <<  uniforms;
-        out << "\n";
-
-        if (mUsesTexture2D)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2D(sampler2D s, float2 t)\n"
-                       "{\n"
-                       "    return tex2D(s, t);\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2D(Texture2D t, SamplerState s, float2 uv)\n"
-                       "{\n"
-                       "    return t.Sample(s, uv);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
 
-        if (mUsesTexture2D_bias)
+        if (!flaggedStructs.empty())
         {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2D(sampler2D s, float2 t, float bias)\n"
-                       "{\n"
-                       "    return tex2Dbias(s, float4(t.x, t.y, 0, bias));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2D(Texture2D t, SamplerState s, float2 uv, float bias)\n"
-                       "{\n"
-                       "    return t.SampleBias(s, uv, bias);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTexture2DProj)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2DProj(sampler2D s, float3 t)\n"
-                       "{\n"
-                       "    return tex2Dproj(s, float4(t.x, t.y, 0, t.z));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProj(sampler2D s, float4 t)\n"
-                       "{\n"
-                       "    return tex2Dproj(s, t);\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2DProj(Texture2D t, SamplerState s, float3 uvw)\n"
-                       "{\n"
-                       "    return t.Sample(s, float2(uvw.x / uvw.z, uvw.y / uvw.z));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProj(Texture2D t, SamplerState s, float4 uvw)\n"
-                       "{\n"
-                       "    return t.Sample(s, float2(uvw.x / uvw.w, uvw.y / uvw.w));\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTexture2DProj_bias)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2DProj(sampler2D s, float3 t, float bias)\n"
-                       "{\n"
-                       "    return tex2Dbias(s, float4(t.x / t.z, t.y / t.z, 0, bias));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProj(sampler2D s, float4 t, float bias)\n"
-                       "{\n"
-                       "    return tex2Dbias(s, float4(t.x / t.w, t.y / t.w, 0, bias));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2DProj(Texture2D t, SamplerState s, float3 uvw, float bias)\n"
-                       "{\n"
-                       "    return t.SampleBias(s, float2(uvw.x / uvw.z, uvw.y / uvw.z), bias);\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProj(Texture2D t, SamplerState s, float4 uvw, float bias)\n"
-                       "{\n"
-                       "    return t.SampleBias(s, float2(uvw.x / uvw.w, uvw.y / uvw.w), bias);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTextureCube)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_textureCube(samplerCUBE s, float3 t)\n"
-                       "{\n"
-                       "    return texCUBE(s, t);\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_textureCube(TextureCube t, SamplerState s, float3 uvw)\n"
-                       "{\n"
-                       "    return t.Sample(s, uvw);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTextureCube_bias)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_textureCube(samplerCUBE s, float3 t, float bias)\n"
-                       "{\n"
-                       "    return texCUBEbias(s, float4(t.x, t.y, t.z, bias));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_textureCube(TextureCube t, SamplerState s, float3 uvw, float bias)\n"
-                       "{\n"
-                       "    return t.SampleBias(s, uvw, bias);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        // These *Lod0 intrinsics are not available in GL fragment shaders.
-        // They are used to sample using discontinuous texture coordinates.
-        if (mUsesTexture2DLod0)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2DLod0(sampler2D s, float2 t)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x, t.y, 0, 0));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2DLod0(Texture2D t, SamplerState s, float2 uv)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uv, 0);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTexture2DLod0_bias)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2DLod0(sampler2D s, float2 t, float bias)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x, t.y, 0, 0));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2DLod0(Texture2D t, SamplerState s, float2 uv, float bias)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uv, 0);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTexture2DProjLod0)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2DProjLod0(sampler2D s, float3 t)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.z, t.y / t.z, 0, 0));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProjLod(sampler2D s, float4 t)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.w, t.y / t.w, 0, 0));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2DProjLod0(Texture2D t, SamplerState s, float3 uvw)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.z, uvw.y / uvw.z), 0);\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProjLod0(Texture2D t, SamplerState s, float4 uvw)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.w, uvw.y / uvw.w), 0);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTexture2DProjLod0_bias)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_texture2DProjLod0_bias(sampler2D s, float3 t, float bias)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.z, t.y / t.z, 0, 0));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProjLod_bias(sampler2D s, float4 t, float bias)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.w, t.y / t.w, 0, 0));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2DProjLod_bias(Texture2D t, SamplerState s, float3 uvw, float bias)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.z, uvw.y / uvw.z), 0);\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProjLod_bias(Texture2D t, SamplerState s, float4 uvw, float bias)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.w, uvw.y / uvw.w), 0);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTextureCubeLod0)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_textureCubeLod0(samplerCUBE s, float3 t)\n"
-                       "{\n"
-                       "    return texCUBElod(s, float4(t.x, t.y, t.z, 0));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_textureCubeLod0(TextureCube t, SamplerState s, float3 uvw)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uvw, 0);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
-        }
-
-        if (mUsesTextureCubeLod0_bias)
-        {
-            if (mOutputType == SH_HLSL9_OUTPUT)
-            {
-                out << "float4 gl_textureCubeLod0(samplerCUBE s, float3 t, float bias)\n"
-                       "{\n"
-                       "    return texCUBElod(s, float4(t.x, t.y, t.z, 0));\n"
-                       "}\n"
-                       "\n";
-            }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_textureCubeLod0(TextureCube t, SamplerState s, float3 uvw, float bias)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uvw, 0);\n"
-                       "}\n"
-                       "\n";
-            }
-            else UNREACHABLE();
+            out << "// Std140 Structures accessed by value\n";
+            out << "\n";
+            out << flaggedStructs;
+            out << "\n";
         }
 
         if (usingMRTExtension && mNumRenderTargets > 1)
@@ -626,7 +477,7 @@ void OutputHLSL::header()
         out <<  attributes;
         out << "\n"
                "static float4 gl_Position = float4(0, 0, 0, 0);\n";
-        
+
         if (mUsesPointSize)
         {
             out << "static float gl_PointSize = float(1);\n";
@@ -676,154 +527,633 @@ void OutputHLSL::header()
                    "\n";
         }
 
-        out << uniforms;
-        out << "\n";
-        
-        if (mUsesTexture2D)
+        if (!flaggedStructs.empty())
         {
-            if (mOutputType == SH_HLSL9_OUTPUT)
+            out << "// Std140 Structures accessed by value\n";
+            out << "\n";
+            out << flaggedStructs;
+            out << "\n";
+        }
+    }
+
+    for (TextureFunctionSet::const_iterator textureFunction = mUsesTexture.begin(); textureFunction != mUsesTexture.end(); textureFunction++)
+    {
+        // Return type
+        if (textureFunction->method == TextureFunction::SIZE)
+        {
+            switch(textureFunction->sampler)
             {
-                out << "float4 gl_texture2D(sampler2D s, float2 t)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x, t.y, 0, 0));\n"
-                       "}\n"
-                       "\n";
+              case EbtSampler2D:            out << "int2 "; break;
+              case EbtSampler3D:            out << "int3 "; break;
+              case EbtSamplerCube:          out << "int2 "; break;
+              case EbtSampler2DArray:       out << "int3 "; break;
+              case EbtISampler2D:           out << "int2 "; break;
+              case EbtISampler3D:           out << "int3 "; break;
+              case EbtISamplerCube:         out << "int2 "; break;
+              case EbtISampler2DArray:      out << "int3 "; break;
+              case EbtUSampler2D:           out << "int2 "; break;
+              case EbtUSampler3D:           out << "int3 "; break;
+              case EbtUSamplerCube:         out << "int2 "; break;
+              case EbtUSampler2DArray:      out << "int3 "; break;
+              case EbtSampler2DShadow:      out << "int2 "; break;
+              case EbtSamplerCubeShadow:    out << "int2 "; break;
+              case EbtSampler2DArrayShadow: out << "int3 "; break;
+              default: UNREACHABLE();
             }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
-            {
-                out << "float4 gl_texture2D(Texture2D t, SamplerState s, float2 uv)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uv, 0);\n"
-                       "}\n"
-                       "\n";
+        }
+        else   // Sampling function
+        {
+            switch(textureFunction->sampler)
+            {
+              case EbtSampler2D:            out << "float4 "; break;
+              case EbtSampler3D:            out << "float4 "; break;
+              case EbtSamplerCube:          out << "float4 "; break;
+              case EbtSampler2DArray:       out << "float4 "; break;
+              case EbtISampler2D:           out << "int4 ";   break;
+              case EbtISampler3D:           out << "int4 ";   break;
+              case EbtISamplerCube:         out << "int4 ";   break;
+              case EbtISampler2DArray:      out << "int4 ";   break;
+              case EbtUSampler2D:           out << "uint4 ";  break;
+              case EbtUSampler3D:           out << "uint4 ";  break;
+              case EbtUSamplerCube:         out << "uint4 ";  break;
+              case EbtUSampler2DArray:      out << "uint4 ";  break;
+              case EbtSampler2DShadow:      out << "float ";  break;
+              case EbtSamplerCubeShadow:    out << "float ";  break;
+              case EbtSampler2DArrayShadow: out << "float ";  break;
+              default: UNREACHABLE();
             }
-            else UNREACHABLE();
         }
 
-        if (mUsesTexture2DLod)
+        // Function name
+        out << textureFunction->name();
+
+        // Argument list
+        int hlslCoords = 4;
+
+        if (mOutputType == SH_HLSL9_OUTPUT)
         {
-            if (mOutputType == SH_HLSL9_OUTPUT)
+            switch(textureFunction->sampler)
             {
-                out << "float4 gl_texture2DLod(sampler2D s, float2 t, float lod)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x, t.y, 0, lod));\n"
-                       "}\n"
-                       "\n";
+              case EbtSampler2D:   out << "sampler2D s";   hlslCoords = 2; break;
+              case EbtSamplerCube: out << "samplerCUBE s"; hlslCoords = 3; break;
+              default: UNREACHABLE();
             }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
+
+            switch(textureFunction->method)
             {
-                out << "float4 gl_texture2DLod(Texture2D t, SamplerState s, float2 uv, float lod)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uv, lod);\n"
-                       "}\n"
-                       "\n";
+              case TextureFunction::IMPLICIT:                 break;
+              case TextureFunction::BIAS:     hlslCoords = 4; break;
+              case TextureFunction::LOD:      hlslCoords = 4; break;
+              case TextureFunction::LOD0:     hlslCoords = 4; break;
+              case TextureFunction::LOD0BIAS: hlslCoords = 4; break;
+              default: UNREACHABLE();
             }
-            else UNREACHABLE();
         }
+        else if (mOutputType == SH_HLSL11_OUTPUT)
+        {
+            switch(textureFunction->sampler)
+            {
+              case EbtSampler2D:            out << "Texture2D x, SamplerState s";                hlslCoords = 2; break;
+              case EbtSampler3D:            out << "Texture3D x, SamplerState s";                hlslCoords = 3; break;
+              case EbtSamplerCube:          out << "TextureCube x, SamplerState s";              hlslCoords = 3; break;
+              case EbtSampler2DArray:       out << "Texture2DArray x, SamplerState s";           hlslCoords = 3; break;
+              case EbtISampler2D:           out << "Texture2D<int4> x, SamplerState s";          hlslCoords = 2; break;
+              case EbtISampler3D:           out << "Texture3D<int4> x, SamplerState s";          hlslCoords = 3; break;
+              case EbtISamplerCube:         out << "Texture2DArray<int4> x, SamplerState s";     hlslCoords = 3; break;
+              case EbtISampler2DArray:      out << "Texture2DArray<int4> x, SamplerState s";     hlslCoords = 3; break;
+              case EbtUSampler2D:           out << "Texture2D<uint4> x, SamplerState s";         hlslCoords = 2; break;
+              case EbtUSampler3D:           out << "Texture3D<uint4> x, SamplerState s";         hlslCoords = 3; break;
+              case EbtUSamplerCube:         out << "Texture2DArray<uint4> x, SamplerState s";    hlslCoords = 3; break;
+              case EbtUSampler2DArray:      out << "Texture2DArray<uint4> x, SamplerState s";    hlslCoords = 3; break;
+              case EbtSampler2DShadow:      out << "Texture2D x, SamplerComparisonState s";      hlslCoords = 2; break;
+              case EbtSamplerCubeShadow:    out << "TextureCube x, SamplerComparisonState s";    hlslCoords = 3; break;
+              case EbtSampler2DArrayShadow: out << "Texture2DArray x, SamplerComparisonState s"; hlslCoords = 3; break;
+              default: UNREACHABLE();
+            }
+        }
+        else UNREACHABLE();
 
-        if (mUsesTexture2DProj)
+        if (textureFunction->method == TextureFunction::FETCH)   // Integer coordinates
         {
-            if (mOutputType == SH_HLSL9_OUTPUT)
+            switch(textureFunction->coords)
             {
-                out << "float4 gl_texture2DProj(sampler2D s, float3 t)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.z, t.y / t.z, 0, 0));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProj(sampler2D s, float4 t)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.w, t.y / t.w, 0, 0));\n"
-                       "}\n"
-                       "\n";
+              case 2: out << ", int2 t"; break;
+              case 3: out << ", int3 t"; break;
+              default: UNREACHABLE();
             }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
+        }
+        else   // Floating-point coordinates (except textureSize)
+        {
+            switch(textureFunction->coords)
             {
-                out << "float4 gl_texture2DProj(Texture2D t, SamplerState s, float3 uvw)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.z, uvw.y / uvw.z), 0);\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProj(Texture2D t, SamplerState s, float4 uvw)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.w, uvw.y / uvw.w), 0);\n"
-                       "}\n"
-                       "\n";
+              case 1: out << ", int lod";  break;   // textureSize()
+              case 2: out << ", float2 t"; break;
+              case 3: out << ", float3 t"; break;
+              case 4: out << ", float4 t"; break;
+              default: UNREACHABLE();
             }
-            else UNREACHABLE();
         }
 
-        if (mUsesTexture2DProjLod)
+        if (textureFunction->method == TextureFunction::GRAD)
+        {
+            switch(textureFunction->sampler)
+            {
+              case EbtSampler2D:
+              case EbtISampler2D:
+              case EbtUSampler2D:
+              case EbtSampler2DArray:
+              case EbtISampler2DArray:
+              case EbtUSampler2DArray:
+              case EbtSampler2DShadow:
+              case EbtSampler2DArrayShadow:
+                out << ", float2 ddx, float2 ddy";
+                break;
+              case EbtSampler3D:
+              case EbtISampler3D:
+              case EbtUSampler3D:
+              case EbtSamplerCube:
+              case EbtISamplerCube:
+              case EbtUSamplerCube:
+              case EbtSamplerCubeShadow:
+                out << ", float3 ddx, float3 ddy";
+                break;
+              default: UNREACHABLE();
+            }
+        }
+
+        switch(textureFunction->method)
         {
-            if (mOutputType == SH_HLSL9_OUTPUT)
+          case TextureFunction::IMPLICIT:                        break;
+          case TextureFunction::BIAS:                            break;   // Comes after the offset parameter
+          case TextureFunction::LOD:      out << ", float lod";  break;
+          case TextureFunction::LOD0:                            break;
+          case TextureFunction::LOD0BIAS:                        break;   // Comes after the offset parameter
+          case TextureFunction::SIZE:                            break;
+          case TextureFunction::FETCH:    out << ", int mip";    break;
+          case TextureFunction::GRAD:                            break;
+          default: UNREACHABLE();
+        }
+
+        if (textureFunction->offset)
+        {
+            switch(textureFunction->sampler)
             {
-                out << "float4 gl_texture2DProjLod(sampler2D s, float3 t, float lod)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.z, t.y / t.z, 0, lod));\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProjLod(sampler2D s, float4 t, float lod)\n"
-                       "{\n"
-                       "    return tex2Dlod(s, float4(t.x / t.w, t.y / t.w, 0, lod));\n"
-                       "}\n"
-                       "\n";
+              case EbtSampler2D:            out << ", int2 offset"; break;
+              case EbtSampler3D:            out << ", int3 offset"; break;
+              case EbtSampler2DArray:       out << ", int2 offset"; break;
+              case EbtISampler2D:           out << ", int2 offset"; break;
+              case EbtISampler3D:           out << ", int3 offset"; break;
+              case EbtISampler2DArray:      out << ", int2 offset"; break;
+              case EbtUSampler2D:           out << ", int2 offset"; break;
+              case EbtUSampler3D:           out << ", int3 offset"; break;
+              case EbtUSampler2DArray:      out << ", int2 offset"; break;
+              case EbtSampler2DShadow:      out << ", int2 offset"; break;
+              case EbtSampler2DArrayShadow: out << ", int2 offset"; break;
+              default: UNREACHABLE();
             }
-            else if (mOutputType == SH_HLSL11_OUTPUT)
+        }
+
+        if (textureFunction->method == TextureFunction::BIAS ||
+            textureFunction->method == TextureFunction::LOD0BIAS)
+        {
+            out << ", float bias";
+        }
+
+        out << ")\n"
+               "{\n";
+
+        if (textureFunction->method == TextureFunction::SIZE)
+        {
+            if (IsSampler2D(textureFunction->sampler) || IsSamplerCube(textureFunction->sampler))
             {
-                out << "float4 gl_texture2DProjLod(Texture2D t, SamplerState s, float3 uvw, float lod)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.z, uvw.y / uvw.z), lod);\n"
-                       "}\n"
-                       "\n"
-                       "float4 gl_texture2DProjLod(Texture2D t, SamplerState s, float4 uvw, float lod)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, float2(uvw.x / uvw.w, uvw.y / uvw.w), lod);\n"
-                       "}\n"
-                       "\n";
+                if (IsSamplerArray(textureFunction->sampler))
+                {
+                    out << "    uint width; uint height; uint layers; uint numberOfLevels;\n"
+                           "    x.GetDimensions(lod, width, height, layers, numberOfLevels);\n";
+                }
+                else
+                {
+                    out << "    uint width; uint height; uint numberOfLevels;\n"
+                           "    x.GetDimensions(lod, width, height, numberOfLevels);\n";
+                }
+            }
+            else if (IsSampler3D(textureFunction->sampler))
+            {
+                out << "    uint width; uint height; uint depth; uint numberOfLevels;\n"
+                       "    x.GetDimensions(lod, width, height, depth, numberOfLevels);\n";
             }
             else UNREACHABLE();
-        }
 
-        if (mUsesTextureCube)
+            switch(textureFunction->sampler)
+            {
+              case EbtSampler2D:            out << "    return int2(width, height);";         break;
+              case EbtSampler3D:            out << "    return int3(width, height, depth);";  break;
+              case EbtSamplerCube:          out << "    return int2(width, height);";         break;
+              case EbtSampler2DArray:       out << "    return int3(width, height, layers);"; break;
+              case EbtISampler2D:           out << "    return int2(width, height);";         break;
+              case EbtISampler3D:           out << "    return int3(width, height, depth);";  break;
+              case EbtISamplerCube:         out << "    return int2(width, height);";         break;
+              case EbtISampler2DArray:      out << "    return int3(width, height, layers);"; break;
+              case EbtUSampler2D:           out << "    return int2(width, height);";         break;
+              case EbtUSampler3D:           out << "    return int3(width, height, depth);";  break;
+              case EbtUSamplerCube:         out << "    return int2(width, height);";         break;
+              case EbtUSampler2DArray:      out << "    return int3(width, height, layers);"; break;
+              case EbtSampler2DShadow:      out << "    return int2(width, height);";         break;
+              case EbtSamplerCubeShadow:    out << "    return int2(width, height);";         break;
+              case EbtSampler2DArrayShadow: out << "    return int3(width, height, layers);"; break;
+              default: UNREACHABLE();
+            }
+        }
+        else
         {
+            if (IsIntegerSampler(textureFunction->sampler) && IsSamplerCube(textureFunction->sampler))
+            {
+                out << "    float width; float height; float layers; float levels;\n";
+
+                out << "    uint mip = 0;\n";
+
+                out << "    x.GetDimensions(mip, width, height, layers, levels);\n";
+
+                out << "    bool xMajor = abs(t.x) > abs(t.y) && abs(t.x) > abs(t.z);\n";
+                out << "    bool yMajor = abs(t.y) > abs(t.z) && abs(t.y) > abs(t.x);\n";
+                out << "    bool zMajor = abs(t.z) > abs(t.x) && abs(t.z) > abs(t.y);\n";
+                out << "    bool negative = (xMajor && t.x < 0.0f) || (yMajor && t.y < 0.0f) || (zMajor && t.z < 0.0f);\n";
+
+                // FACE_POSITIVE_X = 000b
+                // FACE_NEGATIVE_X = 001b
+                // FACE_POSITIVE_Y = 010b
+                // FACE_NEGATIVE_Y = 011b
+                // FACE_POSITIVE_Z = 100b
+                // FACE_NEGATIVE_Z = 101b
+                out << "    int face = (int)negative + (int)yMajor * 2 + (int)zMajor * 4;\n";
+
+                out << "    float u = xMajor ? -t.z : (yMajor && t.y < 0.0f ? -t.x : t.x);\n";
+                out << "    float v = yMajor ? t.z : (negative ? t.y : -t.y);\n";
+                out << "    float m = xMajor ? t.x : (yMajor ? t.y : t.z);\n";
+
+                out << "    t.x = (u * 0.5f / m) + 0.5f;\n";
+                out << "    t.y = (v * 0.5f / m) + 0.5f;\n";
+            }
+            else if (IsIntegerSampler(textureFunction->sampler) &&
+                     textureFunction->method != TextureFunction::FETCH)
+            {
+                if (IsSampler2D(textureFunction->sampler))
+                {
+                    if (IsSamplerArray(textureFunction->sampler))
+                    {
+                        out << "    float width; float height; float layers; float levels;\n";
+
+                        if (textureFunction->method == TextureFunction::LOD0)
+                        {
+                            out << "    uint mip = 0;\n";
+                        }
+                        else if (textureFunction->method == TextureFunction::LOD0BIAS)
+                        {
+                            out << "    uint mip = bias;\n";
+                        }
+                        else
+                        {
+                            if (textureFunction->method == TextureFunction::IMPLICIT ||
+                                textureFunction->method == TextureFunction::BIAS)
+                            {
+                                out << "    x.GetDimensions(0, width, height, layers, levels);\n"
+                                       "    float2 tSized = float2(t.x * width, t.y * height);\n"
+                                       "    float dx = length(ddx(tSized));\n"
+                                       "    float dy = length(ddy(tSized));\n"
+                                       "    float lod = log2(max(dx, dy));\n";
+
+                                if (textureFunction->method == TextureFunction::BIAS)
+                                {
+                                    out << "    lod += bias;\n";
+                                }
+                            }
+                            else if (textureFunction->method == TextureFunction::GRAD)
+                            {
+                                out << "    x.GetDimensions(0, width, height, layers, levels);\n"
+                                       "    float lod = log2(max(length(ddx), length(ddy)));\n";
+                            }
+
+                            out << "    uint mip = uint(min(max(round(lod), 0), levels - 1));\n";
+                        }
+
+                        out << "    x.GetDimensions(mip, width, height, layers, levels);\n";
+                    }
+                    else
+                    {
+                        out << "    float width; float height; float levels;\n";
+
+                        if (textureFunction->method == TextureFunction::LOD0)
+                        {
+                            out << "    uint mip = 0;\n";
+                        }
+                        else if (textureFunction->method == TextureFunction::LOD0BIAS)
+                        {
+                            out << "    uint mip = bias;\n";
+                        }
+                        else
+                        {
+                            if (textureFunction->method == TextureFunction::IMPLICIT ||
+                                textureFunction->method == TextureFunction::BIAS)
+                            {
+                                out << "    x.GetDimensions(0, width, height, levels);\n"
+                                       "    float2 tSized = float2(t.x * width, t.y * height);\n"
+                                       "    float dx = length(ddx(tSized));\n"
+                                       "    float dy = length(ddy(tSized));\n"
+                                       "    float lod = log2(max(dx, dy));\n";
+
+                                if (textureFunction->method == TextureFunction::BIAS)
+                                {
+                                    out << "    lod += bias;\n";
+                                }
+                            }
+                            else if (textureFunction->method == TextureFunction::LOD)
+                            {
+                                out << "    x.GetDimensions(0, width, height, levels);\n";
+                            }
+                            else if (textureFunction->method == TextureFunction::GRAD)
+                            {
+                                out << "    x.GetDimensions(0, width, height, levels);\n"
+                                       "    float lod = log2(max(length(ddx), length(ddy)));\n";
+                            }
+
+                            out << "    uint mip = uint(min(max(round(lod), 0), levels - 1));\n";
+                        }
+
+                        out << "    x.GetDimensions(mip, width, height, levels);\n";
+                    }
+                }
+                else if (IsSampler3D(textureFunction->sampler))
+                {
+                    out << "    float width; float height; float depth; float levels;\n";
+
+                    if (textureFunction->method == TextureFunction::LOD0)
+                    {
+                        out << "    uint mip = 0;\n";
+                    }
+                    else if (textureFunction->method == TextureFunction::LOD0BIAS)
+                    {
+                        out << "    uint mip = bias;\n";
+                    }
+                    else
+                    {
+                        if (textureFunction->method == TextureFunction::IMPLICIT ||
+                            textureFunction->method == TextureFunction::BIAS)
+                        {
+                            out << "    x.GetDimensions(0, width, height, depth, levels);\n"
+                                   "    float3 tSized = float3(t.x * width, t.y * height, t.z * depth);\n"
+                                   "    float dx = length(ddx(tSized));\n"
+                                   "    float dy = length(ddy(tSized));\n"
+                                   "    float lod = log2(max(dx, dy));\n";
+
+                            if (textureFunction->method == TextureFunction::BIAS)
+                            {
+                                out << "    lod += bias;\n";
+                            }
+                        }
+                        else if (textureFunction->method == TextureFunction::GRAD)
+                        {
+                            out << "    x.GetDimensions(0, width, height, depth, levels);\n"
+                                   "    float lod = log2(max(length(ddx), length(ddy)));\n";
+                        }
+
+                        out << "    uint mip = uint(min(max(round(lod), 0), levels - 1));\n";
+                    }
+
+                    out << "    x.GetDimensions(mip, width, height, depth, levels);\n";
+                }
+                else UNREACHABLE();
+            }
+
+            out << "    return ";
+
+            // HLSL intrinsic
             if (mOutputType == SH_HLSL9_OUTPUT)
             {
-                out << "float4 gl_textureCube(samplerCUBE s, float3 t)\n"
-                       "{\n"
-                       "    return texCUBElod(s, float4(t.x, t.y, t.z, 0));\n"
-                       "}\n"
-                       "\n";
+                switch(textureFunction->sampler)
+                {
+                  case EbtSampler2D:   out << "tex2D";   break;
+                  case EbtSamplerCube: out << "texCUBE"; break;
+                  default: UNREACHABLE();
+                }
+
+                switch(textureFunction->method)
+                {
+                  case TextureFunction::IMPLICIT: out << "(s, ";     break;
+                  case TextureFunction::BIAS:     out << "bias(s, "; break;
+                  case TextureFunction::LOD:      out << "lod(s, ";  break;
+                  case TextureFunction::LOD0:     out << "lod(s, ";  break;
+                  case TextureFunction::LOD0BIAS: out << "lod(s, ";  break;
+                  default: UNREACHABLE();
+                }
             }
             else if (mOutputType == SH_HLSL11_OUTPUT)
             {
-                out << "float4 gl_textureCube(TextureCube t, SamplerState s, float3 uvw)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uvw, 0);\n"
-                       "}\n"
-                       "\n";
+                if (textureFunction->method == TextureFunction::GRAD)
+                {
+                    if (IsIntegerSampler(textureFunction->sampler))
+                    {
+                        out << "x.Load(";
+                    }
+                    else if (IsShadowSampler(textureFunction->sampler))
+                    {
+                        out << "x.SampleCmpLevelZero(s, ";
+                    }
+                    else
+                    {
+                        out << "x.SampleGrad(s, ";
+                    }
+                }
+                else if (IsIntegerSampler(textureFunction->sampler) ||
+                         textureFunction->method == TextureFunction::FETCH)
+                {
+                    out << "x.Load(";
+                }
+                else if (IsShadowSampler(textureFunction->sampler))
+                {
+                    out << "x.SampleCmp(s, ";
+                }
+                else
+                {
+                    switch(textureFunction->method)
+                    {
+                      case TextureFunction::IMPLICIT: out << "x.Sample(s, ";      break;
+                      case TextureFunction::BIAS:     out << "x.SampleBias(s, ";  break;
+                      case TextureFunction::LOD:      out << "x.SampleLevel(s, "; break;
+                      case TextureFunction::LOD0:     out << "x.SampleLevel(s, "; break;
+                      case TextureFunction::LOD0BIAS: out << "x.SampleLevel(s, "; break;
+                      default: UNREACHABLE();
+                    }
+                }
             }
             else UNREACHABLE();
-        }
 
-        if (mUsesTextureCubeLod)
-        {
+            // Integer sampling requires integer addresses
+            TString addressx = "";
+            TString addressy = "";
+            TString addressz = "";
+            TString close = "";
+
+            if (IsIntegerSampler(textureFunction->sampler) ||
+                textureFunction->method == TextureFunction::FETCH)
+            {
+                switch(hlslCoords)
+                {
+                  case 2: out << "int3("; break;
+                  case 3: out << "int4("; break;
+                  default: UNREACHABLE();
+                }
+
+                // Convert from normalized floating-point to integer
+                if (textureFunction->method != TextureFunction::FETCH)
+                {
+                    addressx = "int(floor(width * frac((";
+                    addressy = "int(floor(height * frac((";
+
+                    if (IsSamplerArray(textureFunction->sampler))
+                    {
+                        addressz = "int(max(0, min(layers - 1, floor(0.5 + ";
+                    }
+                    else if (IsSamplerCube(textureFunction->sampler))
+                    {
+                        addressz = "((((";
+                    }
+                    else
+                    {
+                        addressz = "int(floor(depth * frac((";
+                    }
+
+                    close = "))))";
+                }
+            }
+            else
+            {
+                switch(hlslCoords)
+                {
+                  case 2: out << "float2("; break;
+                  case 3: out << "float3("; break;
+                  case 4: out << "float4("; break;
+                  default: UNREACHABLE();
+                }
+            }
+
+            TString proj = "";   // Only used for projected textures
+
+            if (textureFunction->proj)
+            {
+                switch(textureFunction->coords)
+                {
+                  case 3: proj = " / t.z"; break;
+                  case 4: proj = " / t.w"; break;
+                  default: UNREACHABLE();
+                }
+            }
+
+            out << addressx + ("t.x" + proj) + close + ", " + addressy + ("t.y" + proj) + close;
+
             if (mOutputType == SH_HLSL9_OUTPUT)
             {
-                out << "float4 gl_textureCubeLod(samplerCUBE s, float3 t, float lod)\n"
-                       "{\n"
-                       "    return texCUBElod(s, float4(t.x, t.y, t.z, lod));\n"
-                       "}\n"
-                       "\n";
+                if (hlslCoords >= 3)
+                {
+                    if (textureFunction->coords < 3)
+                    {
+                        out << ", 0";
+                    }
+                    else
+                    {
+                        out << ", t.z" + proj;
+                    }
+                }
+
+                if (hlslCoords == 4)
+                {
+                    switch(textureFunction->method)
+                    {
+                      case TextureFunction::BIAS:     out << ", bias"; break;
+                      case TextureFunction::LOD:      out << ", lod";  break;
+                      case TextureFunction::LOD0:     out << ", 0";    break;
+                      case TextureFunction::LOD0BIAS: out << ", bias"; break;
+                      default: UNREACHABLE();
+                    }
+                }
+
+                out << "));\n";
             }
             else if (mOutputType == SH_HLSL11_OUTPUT)
             {
-                out << "float4 gl_textureCubeLod(TextureCube t, SamplerState s, float3 uvw, float lod)\n"
-                       "{\n"
-                       "    return t.SampleLevel(s, uvw, lod);\n"
-                       "}\n"
-                       "\n";
+                if (hlslCoords >= 3)
+                {
+                    if (IsIntegerSampler(textureFunction->sampler) && IsSamplerCube(textureFunction->sampler))
+                    {
+                        out << ", face";
+                    }
+                    else
+                    {
+                        out << ", " + addressz + ("t.z" + proj) + close;
+                    }
+                }
+
+                if (textureFunction->method == TextureFunction::GRAD)
+                {
+                    if (IsIntegerSampler(textureFunction->sampler))
+                    {
+                        out << ", mip)";
+                    }
+                    else if (IsShadowSampler(textureFunction->sampler))
+                    {
+                        // Compare value
+                        switch(textureFunction->coords)
+                        {
+                          case 3: out << "), t.z"; break;
+                          case 4: out << "), t.w"; break;
+                          default: UNREACHABLE();
+                        }
+                    }
+                    else
+                    {
+                        out << "), ddx, ddy";
+                    }
+                }
+                else if (IsIntegerSampler(textureFunction->sampler) ||
+                         textureFunction->method == TextureFunction::FETCH)
+                {
+                    out << ", mip)";
+                }
+                else if (IsShadowSampler(textureFunction->sampler))
+                {
+                    // Compare value
+                    switch(textureFunction->coords)
+                    {
+                      case 3: out << "), t.z"; break;
+                      case 4: out << "), t.w"; break;
+                      default: UNREACHABLE();
+                    }
+                }
+                else
+                {
+                    switch(textureFunction->method)
+                    {
+                      case TextureFunction::IMPLICIT: out << ")";       break;
+                      case TextureFunction::BIAS:     out << "), bias"; break;
+                      case TextureFunction::LOD:      out << "), lod";  break;
+                      case TextureFunction::LOD0:     out << "), 0";    break;
+                      case TextureFunction::LOD0BIAS: out << "), bias"; break;
+                      default: UNREACHABLE();
+                    }
+                }
+
+                if (textureFunction->offset)
+                {
+                    out << ", offset";
+                }
+
+                out << ");";
             }
             else UNREACHABLE();
         }
+
+        out << "\n"
+               "}\n"
+               "\n";
     }
 
     if (mUsesFragCoord)
@@ -891,7 +1221,7 @@ void OutputHLSL::header()
                "}\n"
                "\n";
     }
-    
+
     if (mUsesMod3v)
     {
         out << "float3 mod(float3 x, float3 y)\n"
@@ -1039,66 +1369,89 @@ void OutputHLSL::visitSymbol(TIntermSymbol *node)
 {
     TInfoSinkBase &out = mBody;
 
-    TString name = node->getSymbol();
-
-    if (name == "gl_FragColor")
-    {
-        out << "gl_Color[0]";
-        mUsesFragColor = true;
-    }
-    else if (name == "gl_FragData")
+    // Handle accessing std140 structs by value
+    if (mFlaggedStructMappedNames.count(node) > 0)
     {
-        out << "gl_Color";
-        mUsesFragData = true;
+        out << mFlaggedStructMappedNames[node];
+        return;
     }
-    else if (name == "gl_DepthRange")
+
+    TString name = node->getSymbol();
+
+    if (name == "gl_DepthRange")
     {
         mUsesDepthRange = true;
         out << name;
     }
-    else if (name == "gl_FragCoord")
-    {
-        mUsesFragCoord = true;
-        out << name;
-    }
-    else if (name == "gl_PointCoord")
-    {
-        mUsesPointCoord = true;
-        out << name;
-    }
-    else if (name == "gl_FrontFacing")
-    {
-        mUsesFrontFacing = true;
-        out << name;
-    }
-    else if (name == "gl_PointSize")
-    {
-        mUsesPointSize = true;
-        out << name;
-    }
-    else if (name == "gl_FragDepthEXT")
-    {
-        mUsesFragDepth = true;
-        out << "gl_Depth";
-    }
     else
     {
         TQualifier qualifier = node->getQualifier();
 
         if (qualifier == EvqUniform)
         {
-            mReferencedUniforms[name] = node;
-            out << decorateUniform(name, node->getType());
+            const TType& nodeType = node->getType();
+            const TInterfaceBlock* interfaceBlock = nodeType.getInterfaceBlock();
+
+            if (interfaceBlock)
+            {
+                mReferencedInterfaceBlocks[interfaceBlock->name()] = node;
+            }
+            else
+            {
+                mReferencedUniforms[name] = node;
+            }
+
+            out << DecorateUniform(name, nodeType);
         }
-        else if (qualifier == EvqAttribute)
+        else if (qualifier == EvqAttribute || qualifier == EvqVertexIn)
         {
             mReferencedAttributes[name] = node;
-            out << decorate(name);
+            out << Decorate(name);
         }
-        else if (qualifier == EvqVaryingOut || qualifier == EvqInvariantVaryingOut || qualifier == EvqVaryingIn || qualifier == EvqInvariantVaryingIn)
+        else if (IsVarying(qualifier))
         {
             mReferencedVaryings[name] = node;
-            out << decorate(name);
+            out << Decorate(name);
+        }
+        else if (qualifier == EvqFragmentOut)
+        {
+            mReferencedOutputVariables[name] = node;
+            out << "out_" << name;
+        }
+        else if (qualifier == EvqFragColor)
+        {
+            out << "gl_Color[0]";
+            mUsesFragColor = true;
+        }
+        else if (qualifier == EvqFragData)
+        {
+            out << "gl_Color";
+            mUsesFragData = true;
+        }
+        else if (qualifier == EvqFragCoord)
+        {
+            mUsesFragCoord = true;
+            out << name;
+        }
+        else if (qualifier == EvqPointCoord)
+        {
+            mUsesPointCoord = true;
+            out << name;
+        }
+        else if (qualifier == EvqFrontFacing)
+        {
+            mUsesFrontFacing = true;
+            out << name;
+        }
+        else if (qualifier == EvqPointSize)
+        {
+            mUsesPointSize = true;
+            out << name;
+        }
+        else if (name == "gl_FragDepthEXT")
+        {
+            mUsesFragDepth = true;
+            out << "gl_Depth";
         }
         else if (qualifier == EvqInternal)
         {
@@ -1106,15 +1459,27 @@ void OutputHLSL::visitSymbol(TIntermSymbol *node)
         }
         else
         {
-            out << decorate(name);
+            out << Decorate(name);
         }
     }
 }
 
+void OutputHLSL::visitRaw(TIntermRaw *node)
+{
+    mBody << node->getRawText();
+}
+
 bool OutputHLSL::visitBinary(Visit visit, TIntermBinary *node)
 {
     TInfoSinkBase &out = mBody;
 
+    // Handle accessing std140 structs by value
+    if (mFlaggedStructMappedNames.count(node) > 0)
+    {
+        out << mFlaggedStructMappedNames[node];
+        return false;
+    }
+
     switch (node->getOp())
     {
       case EOpAssign:                  outputTriplet(visit, "(", " = ", ")");           break;
@@ -1165,7 +1530,7 @@ bool OutputHLSL::visitBinary(Visit visit, TIntermBinary *node)
         {
             out << " = mul(";
             node->getLeft()->traverse(this);
-            out << ", transpose(";   
+            out << ", transpose(";
         }
         else
         {
@@ -1181,7 +1546,7 @@ bool OutputHLSL::visitBinary(Visit visit, TIntermBinary *node)
         {
             out << " = mul(";
             node->getLeft()->traverse(this);
-            out << ", ";   
+            out << ", ";
         }
         else
         {
@@ -1189,15 +1554,49 @@ bool OutputHLSL::visitBinary(Visit visit, TIntermBinary *node)
         }
         break;
       case EOpDivAssign:               outputTriplet(visit, "(", " /= ", ")");          break;
-      case EOpIndexDirect:             outputTriplet(visit, "", "[", "]");              break;
-      case EOpIndexIndirect:           outputTriplet(visit, "", "[", "]");              break;
+      case EOpIndexDirect:
+        {
+            const TType& leftType = node->getLeft()->getType();
+            if (leftType.isInterfaceBlock())
+            {
+                if (visit == PreVisit)
+                {
+                    TInterfaceBlock* interfaceBlock = leftType.getInterfaceBlock();
+                    const int arrayIndex = node->getRight()->getAsConstantUnion()->getIConst(0);
+                    mReferencedInterfaceBlocks[interfaceBlock->instanceName()] = node->getLeft()->getAsSymbolNode();
+                    out << mUniformHLSL->interfaceBlockInstanceString(*interfaceBlock, arrayIndex);
+                    return false;
+                }
+            }
+            else
+            {
+                outputTriplet(visit, "", "[", "]");
+            }
+        }
+        break;
+      case EOpIndexIndirect:
+        // We do not currently support indirect references to interface blocks
+        ASSERT(node->getLeft()->getBasicType() != EbtInterfaceBlock);
+        outputTriplet(visit, "", "[", "]");
+        break;
       case EOpIndexDirectStruct:
         if (visit == InVisit)
         {
             const TStructure* structure = node->getLeft()->getType().getStruct();
             const TIntermConstantUnion* index = node->getRight()->getAsConstantUnion();
             const TField* field = structure->fields()[index->getIConst(0)];
-            out << "." + decorateField(field->name(), node->getLeft()->getType());
+            out << "." + DecorateField(field->name(), *structure);
+
+            return false;
+        }
+        break;
+      case EOpIndexDirectInterfaceBlock:
+        if (visit == InVisit)
+        {
+            const TInterfaceBlock* interfaceBlock = node->getLeft()->getType().getInterfaceBlock();
+            const TIntermConstantUnion* index = node->getRight()->getAsConstantUnion();
+            const TField* field = interfaceBlock->fields()[index->getIConst(0)];
+            out << "." + Decorate(field->name());
 
             return false;
         }
@@ -1211,9 +1610,9 @@ bool OutputHLSL::visitBinary(Visit visit, TIntermBinary *node)
 
             if (swizzle)
             {
-                TIntermSequence &sequence = swizzle->getSequence();
+                TIntermSequence *sequence = swizzle->getSequence();
 
-                for (TIntermSequence::iterator sit = sequence.begin(); sit != sequence.end(); sit++)
+                for (TIntermSequence::iterator sit = sequence->begin(); sit != sequence->end(); sit++)
                 {
                     TIntermConstantUnion *element = (*sit)->getAsConstantUnion();
 
@@ -1266,16 +1665,17 @@ bool OutputHLSL::visitBinary(Visit visit, TIntermBinary *node)
                 out << "!(";
             }
 
-            const TFieldList &fields = node->getLeft()->getType().getStruct()->fields();
+            const TStructure &structure = *node->getLeft()->getType().getStruct();
+            const TFieldList &fields = structure.fields();
 
             for (size_t i = 0; i < fields.size(); i++)
             {
                 const TField *field = fields[i];
 
                 node->getLeft()->traverse(this);
-                out << "." + decorateField(field->name(), node->getLeft()->getType()) + " == ";
+                out << "." + DecorateField(field->name(), structure) + " == ";
                 node->getRight()->traverse(this);
-                out << "." + decorateField(field->name(), node->getLeft()->getType());
+                out << "." + DecorateField(field->name(), structure);
 
                 if (i < fields.size() - 1)
                 {
@@ -1346,46 +1746,13 @@ bool OutputHLSL::visitUnary(Visit visit, TIntermUnary *node)
 {
     switch (node->getOp())
     {
-      case EOpNegative:         outputTriplet(visit, "(-", "", ")");  break;
-      case EOpVectorLogicalNot: outputTriplet(visit, "(!", "", ")");  break;
-      case EOpLogicalNot:       outputTriplet(visit, "(!", "", ")");  break;
-      case EOpPostIncrement:    outputTriplet(visit, "(", "", "++)"); break;
-      case EOpPostDecrement:    outputTriplet(visit, "(", "", "--)"); break;
-      case EOpPreIncrement:     outputTriplet(visit, "(++", "", ")"); break;
-      case EOpPreDecrement:     outputTriplet(visit, "(--", "", ")"); break;
-      case EOpConvIntToBool:
-      case EOpConvFloatToBool:
-        switch (node->getOperand()->getType().getNominalSize())
-        {
-          case 1:    outputTriplet(visit, "bool(", "", ")");  break;
-          case 2:    outputTriplet(visit, "bool2(", "", ")"); break;
-          case 3:    outputTriplet(visit, "bool3(", "", ")"); break;
-          case 4:    outputTriplet(visit, "bool4(", "", ")"); break;
-          default: UNREACHABLE();
-        }
-        break;
-      case EOpConvBoolToFloat:
-      case EOpConvIntToFloat:
-        switch (node->getOperand()->getType().getNominalSize())
-        {
-          case 1:    outputTriplet(visit, "float(", "", ")");  break;
-          case 2:    outputTriplet(visit, "float2(", "", ")"); break;
-          case 3:    outputTriplet(visit, "float3(", "", ")"); break;
-          case 4:    outputTriplet(visit, "float4(", "", ")"); break;
-          default: UNREACHABLE();
-        }
-        break;
-      case EOpConvFloatToInt:
-      case EOpConvBoolToInt:
-        switch (node->getOperand()->getType().getNominalSize())
-        {
-          case 1:    outputTriplet(visit, "int(", "", ")");  break;
-          case 2:    outputTriplet(visit, "int2(", "", ")"); break;
-          case 3:    outputTriplet(visit, "int3(", "", ")"); break;
-          case 4:    outputTriplet(visit, "int4(", "", ")"); break;
-          default: UNREACHABLE();
-        }
-        break;
+      case EOpNegative:         outputTriplet(visit, "(-", "", ")");         break;
+      case EOpVectorLogicalNot: outputTriplet(visit, "(!", "", ")");         break;
+      case EOpLogicalNot:       outputTriplet(visit, "(!", "", ")");         break;
+      case EOpPostIncrement:    outputTriplet(visit, "(", "", "++)");        break;
+      case EOpPostDecrement:    outputTriplet(visit, "(", "", "--)");        break;
+      case EOpPreIncrement:     outputTriplet(visit, "(++", "", ")");        break;
+      case EOpPreDecrement:     outputTriplet(visit, "(--", "", ")");        break;
       case EOpRadians:          outputTriplet(visit, "radians(", "", ")");   break;
       case EOpDegrees:          outputTriplet(visit, "degrees(", "", ")");   break;
       case EOpSin:              outputTriplet(visit, "sin(", "", ")");       break;
@@ -1457,20 +1824,9 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
             {
                 outputLineDirective(node->getLine().first_line);
                 out << "{\n";
-
-                mScopeDepth++;
-
-                if (mScopeBracket.size() < mScopeDepth)
-                {
-                    mScopeBracket.push_back(0);   // New scope level
-                }
-                else
-                {
-                    mScopeBracket[mScopeDepth - 1]++;   // New scope at existing level
-                }
             }
 
-            for (TIntermSequence::iterator sit = node->getSequence().begin(); sit != node->getSequence().end(); sit++)
+            for (TIntermSequence::iterator sit = node->getSequence()->begin(); sit != node->getSequence()->end(); sit++)
             {
                 outputLineDirective((*sit)->getLine().first_line);
 
@@ -1483,8 +1839,6 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
             {
                 outputLineDirective(node->getLine().last_line);
                 out << "}\n";
-
-                mScopeDepth--;
             }
 
             return false;
@@ -1492,14 +1846,16 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
       case EOpDeclaration:
         if (visit == PreVisit)
         {
-            TIntermSequence &sequence = node->getSequence();
-            TIntermTyped *variable = sequence[0]->getAsTyped();
+            TIntermSequence *sequence = node->getSequence();
+            TIntermTyped *variable = (*sequence)[0]->getAsTyped();
 
             if (variable && (variable->getQualifier() == EvqTemporary || variable->getQualifier() == EvqGlobal))
             {
-                if (variable->getType().getStruct())
+                TStructure *structure = variable->getType().getStruct();
+
+                if (structure)
                 {
-                    addConstructor(variable->getType(), scopedStruct(variable->getType().getStruct()->name()), NULL);
+                    mStructureHLSL->addConstructor(variable->getType(), StructNameString(*structure), NULL);
                 }
 
                 if (!variable->getAsSymbolNode() || variable->getAsSymbolNode()->getSymbol() != "")   // Variable declaration
@@ -1509,16 +1865,16 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
                         out << "static ";
                     }
 
-                    out << typeString(variable->getType()) + " ";
+                    out << TypeString(variable->getType()) + " ";
 
-                    for (TIntermSequence::iterator sit = sequence.begin(); sit != sequence.end(); sit++)
+                    for (TIntermSequence::iterator sit = sequence->begin(); sit != sequence->end(); sit++)
                     {
                         TIntermSymbol *symbol = (*sit)->getAsSymbolNode();
 
                         if (symbol)
                         {
                             symbol->traverse(this);
-                            out << arrayString(symbol->getType());
+                            out << ArrayString(symbol->getType());
                             out << " = " + initializer(symbol->getType());
                         }
                         else
@@ -1526,7 +1882,7 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
                             (*sit)->traverse(this);
                         }
 
-                        if (*sit != sequence.back())
+                        if (*sit != sequence->back())
                         {
                             out << ", ";
                         }
@@ -1538,9 +1894,9 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
                 }
                 else UNREACHABLE();
             }
-            else if (variable && (variable->getQualifier() == EvqVaryingOut || variable->getQualifier() == EvqInvariantVaryingOut))
+            else if (variable && IsVaryingOut(variable->getQualifier()))
             {
-                for (TIntermSequence::iterator sit = sequence.begin(); sit != sequence.end(); sit++)
+                for (TIntermSequence::iterator sit = sequence->begin(); sit != sequence->end(); sit++)
                 {
                     TIntermSymbol *symbol = (*sit)->getAsSymbolNode();
 
@@ -1563,22 +1919,25 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
             out << ", ";
         }
         break;
+      case EOpInvariantDeclaration:
+        // Do not do any translation
+        return false;
       case EOpPrototype:
         if (visit == PreVisit)
         {
-            out << typeString(node->getType()) << " " << decorate(node->getName()) << (mOutputLod0Function ? "Lod0(" : "(");
+            out << TypeString(node->getType()) << " " << Decorate(node->getName()) << (mOutputLod0Function ? "Lod0(" : "(");
 
-            TIntermSequence &arguments = node->getSequence();
+            TIntermSequence *arguments = node->getSequence();
 
-            for (unsigned int i = 0; i < arguments.size(); i++)
+            for (unsigned int i = 0; i < arguments->size(); i++)
             {
-                TIntermSymbol *symbol = arguments[i]->getAsSymbolNode();
+                TIntermSymbol *symbol = (*arguments)[i]->getAsSymbolNode();
 
                 if (symbol)
                 {
                     out << argumentString(symbol);
 
-                    if (i < arguments.size() - 1)
+                    if (i < arguments->size() - 1)
                     {
                         out << ", ";
                     }
@@ -1604,7 +1963,7 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
         {
             TString name = TFunction::unmangleName(node->getName());
 
-            out << typeString(node->getType()) << " ";
+            out << TypeString(node->getType()) << " ";
 
             if (name == "main")
             {
@@ -1612,26 +1971,28 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
             }
             else
             {
-                out << decorate(name) << (mOutputLod0Function ? "Lod0(" : "(");
+                out << Decorate(name) << (mOutputLod0Function ? "Lod0(" : "(");
             }
 
-            TIntermSequence &sequence = node->getSequence();
-            TIntermSequence &arguments = sequence[0]->getAsAggregate()->getSequence();
+            TIntermSequence *sequence = node->getSequence();
+            TIntermSequence *arguments = (*sequence)[0]->getAsAggregate()->getSequence();
 
-            for (unsigned int i = 0; i < arguments.size(); i++)
+            for (unsigned int i = 0; i < arguments->size(); i++)
             {
-                TIntermSymbol *symbol = arguments[i]->getAsSymbolNode();
+                TIntermSymbol *symbol = (*arguments)[i]->getAsSymbolNode();
 
                 if (symbol)
                 {
-                    if (symbol->getType().getStruct())
+                    TStructure *structure = symbol->getType().getStruct();
+
+                    if (structure)
                     {
-                        addConstructor(symbol->getType(), scopedStruct(symbol->getType().getStruct()->name()), NULL);
+                        mStructureHLSL->addConstructor(symbol->getType(), StructNameString(*structure), NULL);
                     }
 
                     out << argumentString(symbol);
 
-                    if (i < arguments.size() - 1)
+                    if (i < arguments->size() - 1)
                     {
                         out << ", ";
                     }
@@ -1641,14 +2002,14 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
 
             out << ")\n"
                 "{\n";
-            
-            if (sequence.size() > 1)
+
+            if (sequence->size() > 1)
             {
                 mInsideFunction = true;
-                sequence[1]->traverse(this);
+                (*sequence)[1]->traverse(this);
                 mInsideFunction = false;
             }
-            
+
             out << "}\n";
 
             if (mContainsLoopDiscontinuity && !mOutputLod0Function)
@@ -1668,142 +2029,133 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
         {
             TString name = TFunction::unmangleName(node->getName());
             bool lod0 = mInsideDiscontinuousLoop || mOutputLod0Function;
+            TIntermSequence *arguments = node->getSequence();
 
             if (node->isUserDefined())
             {
-                out << decorate(name) << (lod0 ? "Lod0(" : "(");
+                out << Decorate(name) << (lod0 ? "Lod0(" : "(");
             }
             else
             {
-                if (name == "texture2D")
-                {
-                    if (!lod0)
-                    {
-                        if (node->getSequence().size() == 2)
-                        {
-                            mUsesTexture2D = true;
-                        }
-                        else if (node->getSequence().size() == 3)
-                        {
-                            mUsesTexture2D_bias = true;
-                        }
-                        else UNREACHABLE();
+                TBasicType samplerType = (*arguments)[0]->getAsTyped()->getType().getBasicType();
 
-                        out << "gl_texture2D(";
-                    }
-                    else
-                    {
-                        if (node->getSequence().size() == 2)
-                        {
-                            mUsesTexture2DLod0 = true;
-                        }
-                        else if (node->getSequence().size() == 3)
-                        {
-                            mUsesTexture2DLod0_bias = true;
-                        }
-                        else UNREACHABLE();
+                TextureFunction textureFunction;
+                textureFunction.sampler = samplerType;
+                textureFunction.coords = (*arguments)[1]->getAsTyped()->getNominalSize();
+                textureFunction.method = TextureFunction::IMPLICIT;
+                textureFunction.proj = false;
+                textureFunction.offset = false;
 
-                        out << "gl_texture2DLod0(";
-                    }
+                if (name == "texture2D" || name == "textureCube" || name == "texture")
+                {
+                    textureFunction.method = TextureFunction::IMPLICIT;
                 }
-                else if (name == "texture2DProj")
+                else if (name == "texture2DProj" || name == "textureProj")
                 {
-                    if (!lod0)
-                    {
-                        if (node->getSequence().size() == 2)
-                        {
-                            mUsesTexture2DProj = true;
-                        }
-                        else if (node->getSequence().size() == 3)
-                        {
-                            mUsesTexture2DProj_bias = true;
-                        }
-                        else UNREACHABLE();
-
-                        out << "gl_texture2DProj(";
-                    }
-                    else
-                    {
-                        if (node->getSequence().size() == 2)
-                        {
-                            mUsesTexture2DProjLod0 = true;
-                        }
-                        else if (node->getSequence().size() == 3)
-                        {
-                            mUsesTexture2DProjLod0_bias = true;
-                        }
-                        else UNREACHABLE();
-
-                        out << "gl_texture2DProjLod0(";
-                    }
+                    textureFunction.method = TextureFunction::IMPLICIT;
+                    textureFunction.proj = true;
                 }
-                else if (name == "textureCube")
+                else if (name == "texture2DLod" || name == "textureCubeLod" || name == "textureLod" ||
+                         name == "texture2DLodEXT" || name == "textureCubeLodEXT")
                 {
-                    if (!lod0)
-                    {
-                        if (node->getSequence().size() == 2)
-                        {
-                            mUsesTextureCube = true;
-                        }
-                        else if (node->getSequence().size() == 3)
-                        {
-                            mUsesTextureCube_bias = true;
-                        }
-                        else UNREACHABLE();
+                    textureFunction.method = TextureFunction::LOD;
+                }
+                else if (name == "texture2DProjLod" || name == "textureProjLod" || name == "texture2DProjLodEXT")
+                {
+                    textureFunction.method = TextureFunction::LOD;
+                    textureFunction.proj = true;
+                }
+                else if (name == "textureSize")
+                {
+                    textureFunction.method = TextureFunction::SIZE;
+                }
+                else if (name == "textureOffset")
+                {
+                    textureFunction.method = TextureFunction::IMPLICIT;
+                    textureFunction.offset = true;
+                }
+                else if (name == "textureProjOffset")
+                {
+                    textureFunction.method = TextureFunction::IMPLICIT;
+                    textureFunction.offset = true;
+                    textureFunction.proj = true;
+                }
+                else if (name == "textureLodOffset")
+                {
+                    textureFunction.method = TextureFunction::LOD;
+                    textureFunction.offset = true;
+                }
+                else if (name == "textureProjLodOffset")
+                {
+                    textureFunction.method = TextureFunction::LOD;
+                    textureFunction.proj = true;
+                    textureFunction.offset = true;
+                }
+                else if (name == "texelFetch")
+                {
+                    textureFunction.method = TextureFunction::FETCH;
+                }
+                else if (name == "texelFetchOffset")
+                {
+                    textureFunction.method = TextureFunction::FETCH;
+                    textureFunction.offset = true;
+                }
+                else if (name == "textureGrad" || name == "texture2DGradEXT")
+                {
+                    textureFunction.method = TextureFunction::GRAD;
+                }
+                else if (name == "textureGradOffset")
+                {
+                    textureFunction.method = TextureFunction::GRAD;
+                    textureFunction.offset = true;
+                }
+                else if (name == "textureProjGrad" || name == "texture2DProjGradEXT" || name == "textureCubeGradEXT")
+                {
+                    textureFunction.method = TextureFunction::GRAD;
+                    textureFunction.proj = true;
+                }
+                else if (name == "textureProjGradOffset")
+                {
+                    textureFunction.method = TextureFunction::GRAD;
+                    textureFunction.proj = true;
+                    textureFunction.offset = true;
+                }
+                else UNREACHABLE();
 
-                        out << "gl_textureCube(";
+                if (textureFunction.method == TextureFunction::IMPLICIT)   // Could require lod 0 or have a bias argument
+                {
+                    unsigned int mandatoryArgumentCount = 2;   // All functions have sampler and coordinate arguments
+
+                    if (textureFunction.offset)
+                    {
+                        mandatoryArgumentCount++;
                     }
-                    else
+
+                    bool bias = (arguments->size() > mandatoryArgumentCount);   // Bias argument is optional
+
+                    if (lod0 || mContext.shaderType == GL_VERTEX_SHADER)
                     {
-                        if (node->getSequence().size() == 2)
+                        if (bias)
                         {
-                            mUsesTextureCubeLod0 = true;
+                            textureFunction.method = TextureFunction::LOD0BIAS;
                         }
-                        else if (node->getSequence().size() == 3)
+                        else
                         {
-                            mUsesTextureCubeLod0_bias = true;
+                            textureFunction.method = TextureFunction::LOD0;
                         }
-                        else UNREACHABLE();
-
-                        out << "gl_textureCubeLod0(";
                     }
-                }
-                else if (name == "texture2DLod")
-                {
-                    if (node->getSequence().size() == 3)
+                    else if (bias)
                     {
-                        mUsesTexture2DLod = true;
+                        textureFunction.method = TextureFunction::BIAS;
                     }
-                    else UNREACHABLE();
-
-                    out << "gl_texture2DLod(";
                 }
-                else if (name == "texture2DProjLod")
-                {
-                    if (node->getSequence().size() == 3)
-                    {
-                        mUsesTexture2DProjLod = true;
-                    }
-                    else UNREACHABLE();
 
-                    out << "gl_texture2DProjLod(";
-                }
-                else if (name == "textureCubeLod")
-                {
-                    if (node->getSequence().size() == 3)
-                    {
-                        mUsesTextureCubeLod = true;
-                    }
-                    else UNREACHABLE();
+                mUsesTexture.insert(textureFunction);
 
-                    out << "gl_textureCubeLod(";
-                }
-                else UNREACHABLE();
+                out << textureFunction.name();
             }
 
-            TIntermSequence &arguments = node->getSequence();
-
-            for (TIntermSequence::iterator arg = arguments.begin(); arg != arguments.end(); arg++)
+            for (TIntermSequence::iterator arg = arguments->begin(); arg != arguments->end(); arg++)
             {
                 if (mOutputType == SH_HLSL11_OUTPUT && IsSampler((*arg)->getAsTyped()->getBasicType()))
                 {
@@ -1814,7 +2166,7 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
 
                 (*arg)->traverse(this);
 
-                if (arg < arguments.end() - 1)
+                if (arg < arguments->end() - 1)
                 {
                     out << ", ";
                 }
@@ -1825,70 +2177,32 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
             return false;
         }
         break;
-      case EOpParameters:       outputTriplet(visit, "(", ", ", ")\n{\n");             break;
-      case EOpConstructFloat:
-        addConstructor(node->getType(), "vec1", &node->getSequence());
-        outputTriplet(visit, "vec1(", "", ")");
-        break;
-      case EOpConstructVec2:
-        addConstructor(node->getType(), "vec2", &node->getSequence());
-        outputTriplet(visit, "vec2(", ", ", ")");
-        break;
-      case EOpConstructVec3:
-        addConstructor(node->getType(), "vec3", &node->getSequence());
-        outputTriplet(visit, "vec3(", ", ", ")");
-        break;
-      case EOpConstructVec4:
-        addConstructor(node->getType(), "vec4", &node->getSequence());
-        outputTriplet(visit, "vec4(", ", ", ")");
-        break;
-      case EOpConstructBool:
-        addConstructor(node->getType(), "bvec1", &node->getSequence());
-        outputTriplet(visit, "bvec1(", "", ")");
-        break;
-      case EOpConstructBVec2:
-        addConstructor(node->getType(), "bvec2", &node->getSequence());
-        outputTriplet(visit, "bvec2(", ", ", ")");
-        break;
-      case EOpConstructBVec3:
-        addConstructor(node->getType(), "bvec3", &node->getSequence());
-        outputTriplet(visit, "bvec3(", ", ", ")");
-        break;
-      case EOpConstructBVec4:
-        addConstructor(node->getType(), "bvec4", &node->getSequence());
-        outputTriplet(visit, "bvec4(", ", ", ")");
-        break;
-      case EOpConstructInt:
-        addConstructor(node->getType(), "ivec1", &node->getSequence());
-        outputTriplet(visit, "ivec1(", "", ")");
-        break;
-      case EOpConstructIVec2:
-        addConstructor(node->getType(), "ivec2", &node->getSequence());
-        outputTriplet(visit, "ivec2(", ", ", ")");
-        break;
-      case EOpConstructIVec3:
-        addConstructor(node->getType(), "ivec3", &node->getSequence());
-        outputTriplet(visit, "ivec3(", ", ", ")");
-        break;
-      case EOpConstructIVec4:
-        addConstructor(node->getType(), "ivec4", &node->getSequence());
-        outputTriplet(visit, "ivec4(", ", ", ")");
-        break;
-      case EOpConstructMat2:
-        addConstructor(node->getType(), "mat2", &node->getSequence());
-        outputTriplet(visit, "mat2(", ", ", ")");
-        break;
-      case EOpConstructMat3:
-        addConstructor(node->getType(), "mat3", &node->getSequence());
-        outputTriplet(visit, "mat3(", ", ", ")");
-        break;
-      case EOpConstructMat4: 
-        addConstructor(node->getType(), "mat4", &node->getSequence());
-        outputTriplet(visit, "mat4(", ", ", ")");
-        break;
+      case EOpParameters:       outputTriplet(visit, "(", ", ", ")\n{\n");                                break;
+      case EOpConstructFloat:   outputConstructor(visit, node->getType(), "vec1", node->getSequence());  break;
+      case EOpConstructVec2:    outputConstructor(visit, node->getType(), "vec2", node->getSequence());  break;
+      case EOpConstructVec3:    outputConstructor(visit, node->getType(), "vec3", node->getSequence());  break;
+      case EOpConstructVec4:    outputConstructor(visit, node->getType(), "vec4", node->getSequence());  break;
+      case EOpConstructBool:    outputConstructor(visit, node->getType(), "bvec1", node->getSequence()); break;
+      case EOpConstructBVec2:   outputConstructor(visit, node->getType(), "bvec2", node->getSequence()); break;
+      case EOpConstructBVec3:   outputConstructor(visit, node->getType(), "bvec3", node->getSequence()); break;
+      case EOpConstructBVec4:   outputConstructor(visit, node->getType(), "bvec4", node->getSequence()); break;
+      case EOpConstructInt:     outputConstructor(visit, node->getType(), "ivec1", node->getSequence()); break;
+      case EOpConstructIVec2:   outputConstructor(visit, node->getType(), "ivec2", node->getSequence()); break;
+      case EOpConstructIVec3:   outputConstructor(visit, node->getType(), "ivec3", node->getSequence()); break;
+      case EOpConstructIVec4:   outputConstructor(visit, node->getType(), "ivec4", node->getSequence()); break;
+      case EOpConstructUInt:    outputConstructor(visit, node->getType(), "uvec1", node->getSequence()); break;
+      case EOpConstructUVec2:   outputConstructor(visit, node->getType(), "uvec2", node->getSequence()); break;
+      case EOpConstructUVec3:   outputConstructor(visit, node->getType(), "uvec3", node->getSequence()); break;
+      case EOpConstructUVec4:   outputConstructor(visit, node->getType(), "uvec4", node->getSequence()); break;
+      case EOpConstructMat2:    outputConstructor(visit, node->getType(), "mat2", node->getSequence());  break;
+      case EOpConstructMat3:    outputConstructor(visit, node->getType(), "mat3", node->getSequence());  break;
+      case EOpConstructMat4:    outputConstructor(visit, node->getType(), "mat4", node->getSequence());  break;
       case EOpConstructStruct:
-        addConstructor(node->getType(), scopedStruct(node->getType().getStruct()->name()), &node->getSequence());
-        outputTriplet(visit, structLookup(node->getType().getStruct()->name()) + "_ctor(", ", ", ")");
+        {
+            const TString &structName = StructNameString(*node->getType().getStruct());
+            mStructureHLSL->addConstructor(node->getType(), structName, node->getSequence());
+            outputTriplet(visit, structName + "_ctor(", ", ", ")");
+        }
         break;
       case EOpLessThan:         outputTriplet(visit, "(", " < ", ")");                 break;
       case EOpGreaterThan:      outputTriplet(visit, "(", " > ", ")");                 break;
@@ -1899,8 +2213,9 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
       case EOpMod:
         {
             // We need to look at the number of components in both arguments
-            switch (node->getSequence()[0]->getAsTyped()->getNominalSize() * 10
-                     + node->getSequence()[1]->getAsTyped()->getNominalSize())
+            const int modValue = (*node->getSequence())[0]->getAsTyped()->getNominalSize() * 10 +
+                (*node->getSequence())[1]->getAsTyped()->getNominalSize();
+            switch (modValue)
             {
               case 11: mUsesMod1 = true; break;
               case 22: mUsesMod2v = true; break;
@@ -1917,8 +2232,8 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
         break;
       case EOpPow:              outputTriplet(visit, "pow(", ", ", ")");               break;
       case EOpAtan:
-        ASSERT(node->getSequence().size() == 2);   // atan(x) is a unary operator
-        switch (node->getSequence()[0]->getAsTyped()->getNominalSize())
+        ASSERT(node->getSequence()->size() == 2);   // atan(x) is a unary operator
+        switch ((*node->getSequence())[0]->getAsTyped()->getNominalSize())
         {
           case 1: mUsesAtan2_1 = true; break;
           case 2: mUsesAtan2_2 = true; break;
@@ -1939,7 +2254,7 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
       case EOpCross:         outputTriplet(visit, "cross(", ", ", ")");         break;
       case EOpFaceForward:
         {
-            switch (node->getSequence()[0]->getAsTyped()->getNominalSize())   // Number of components in the first argument
+            switch ((*node->getSequence())[0]->getAsTyped()->getNominalSize())   // Number of components in the first argument
             {
             case 1: mUsesFaceforward1 = true; break;
             case 2: mUsesFaceforward2 = true; break;
@@ -1947,7 +2262,7 @@ bool OutputHLSL::visitAggregate(Visit visit, TIntermAggregate *node)
             case 4: mUsesFaceforward4 = true; break;
             default: UNREACHABLE();
             }
-            
+
             outputTriplet(visit, "faceforward(", ", ", ")");
         }
         break;
@@ -1977,7 +2292,7 @@ bool OutputHLSL::visitSelection(Visit visit, TIntermSelection *node)
         node->getCondition()->traverse(this);
 
         out << ")\n";
-        
+
         outputLineDirective(node->getLine().first_line);
         out << "{\n";
 
@@ -2028,6 +2343,8 @@ void OutputHLSL::visitConstantUnion(TIntermConstantUnion *node)
 
 bool OutputHLSL::visitLoop(Visit visit, TIntermLoop *node)
 {
+    mNestedLoopDepth++;
+
     bool wasDiscontinuous = mInsideDiscontinuousLoop;
 
     if (mContainsLoopDiscontinuity && !mInsideDiscontinuousLoop)
@@ -2039,6 +2356,9 @@ bool OutputHLSL::visitLoop(Visit visit, TIntermLoop *node)
     {
         if (handleExcessiveLoop(node))
         {
+            mInsideDiscontinuousLoop = wasDiscontinuous;
+            mNestedLoopDepth--;
+
             return false;
         }
     }
@@ -2055,7 +2375,7 @@ bool OutputHLSL::visitLoop(Visit visit, TIntermLoop *node)
     else
     {
         out << "{for(";
-        
+
         if (node->getInit())
         {
             node->getInit()->traverse(this);
@@ -2076,7 +2396,7 @@ bool OutputHLSL::visitLoop(Visit visit, TIntermLoop *node)
         }
 
         out << ")\n";
-        
+
         outputLineDirective(node->getLine().first_line);
         out << "{\n";
     }
@@ -2102,6 +2422,7 @@ bool OutputHLSL::visitLoop(Visit visit, TIntermLoop *node)
     out << "}\n";
 
     mInsideDiscontinuousLoop = wasDiscontinuous;
+    mNestedLoopDepth--;
 
     return false;
 }
@@ -2118,6 +2439,11 @@ bool OutputHLSL::visitBranch(Visit visit, TIntermBranch *node)
       case EOpBreak:
         if (visit == PreVisit)
         {
+            if (mNestedLoopDepth > 1)
+            {
+                mUsesNestedBreak = true;
+            }
+
             if (mExcessiveLoopIndex)
             {
                 out << "{Break";
@@ -2179,7 +2505,7 @@ bool OutputHLSL::isSingleStatement(TIntermNode *node)
         }
         else
         {
-            for (TIntermSequence::iterator sit = aggregate->getSequence().begin(); sit != aggregate->getSequence().end(); sit++)
+            for (TIntermSequence::iterator sit = aggregate->getSequence()->begin(); sit != aggregate->getSequence()->end(); sit++)
             {
                 if (!isSingleStatement(*sit))
                 {
@@ -2216,8 +2542,8 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
 
         if (init)
         {
-            TIntermSequence &sequence = init->getSequence();
-            TIntermTyped *variable = sequence[0]->getAsTyped();
+            TIntermSequence *sequence = init->getSequence();
+            TIntermTyped *variable = (*sequence)[0]->getAsTyped();
 
             if (variable && variable->getQualifier() == EvqTemporary)
             {
@@ -2230,7 +2556,7 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
 
                     if (symbol && constant)
                     {
-                        if (constant->getBasicType() == EbtInt && constant->getNominalSize() == 1)
+                        if (constant->getBasicType() == EbtInt && constant->isScalar())
                         {
                             index = symbol;
                             initial = constant->getIConst(0);
@@ -2245,14 +2571,14 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
     if (index != NULL && node->getCondition())
     {
         TIntermBinary *test = node->getCondition()->getAsBinaryNode();
-        
+
         if (test && test->getLeft()->getAsSymbolNode()->getId() == index->getId())
         {
             TIntermConstantUnion *constant = test->getRight()->getAsConstantUnion();
 
             if (constant)
             {
-                if (constant->getBasicType() == EbtInt && constant->getNominalSize() == 1)
+                if (constant->getBasicType() == EbtInt && constant->isScalar())
                 {
                     comparator = test->getOp();
                     limit = constant->getIConst(0);
@@ -2266,7 +2592,7 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
     {
         TIntermBinary *binaryTerminal = node->getExpression()->getAsBinaryNode();
         TIntermUnary *unaryTerminal = node->getExpression()->getAsUnaryNode();
-        
+
         if (binaryTerminal)
         {
             TOperator op = binaryTerminal->getOp();
@@ -2274,7 +2600,7 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
 
             if (constant)
             {
-                if (constant->getBasicType() == EbtInt && constant->getNominalSize() == 1)
+                if (constant->getBasicType() == EbtInt && constant->isScalar())
                 {
                     int value = constant->getIConst(0);
 
@@ -2346,7 +2672,7 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
                 {
                     mExcessiveLoopIndex = NULL;   // Stops setting the Break flag
                 }
-                
+
                 // for(int index = initial; index < clampedLimit; index += increment)
 
                 out << "for(";
@@ -2364,7 +2690,7 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
                 out << " += ";
                 out << increment;
                 out << ")\n";
-                
+
                 outputLineDirective(node->getLine().first_line);
                 out << "{\n";
 
@@ -2386,7 +2712,7 @@ bool OutputHLSL::handleExcessiveLoop(TIntermLoop *node)
                 initial += MAX_LOOP_ITERATIONS * increment;
                 iterations -= MAX_LOOP_ITERATIONS;
             }
-            
+
             out << "}";
 
             mExcessiveLoopIndex = restoreIndex;
@@ -2428,7 +2754,7 @@ void OutputHLSL::outputLineDirective(int line)
         {
             mBody << " \"" << mContext.sourcePath << "\"";
         }
-        
+
         mBody << "\n";
     }
 }
@@ -2445,140 +2771,16 @@ TString OutputHLSL::argumentString(const TIntermSymbol *symbol)
     }
     else
     {
-        name = decorate(name);
+        name = Decorate(name);
     }
 
     if (mOutputType == SH_HLSL11_OUTPUT && IsSampler(type.getBasicType()))
     {
-       return qualifierString(qualifier) + " " + textureString(type) + " texture_" + name + arrayString(type) + ", " +
-              qualifierString(qualifier) + " SamplerState sampler_" + name + arrayString(type);
-    }
-
-    return qualifierString(qualifier) + " " + typeString(type) + " " + name + arrayString(type);
-}
-
-TString OutputHLSL::qualifierString(TQualifier qualifier)
-{
-    switch(qualifier)
-    {
-      case EvqIn:            return "in";
-      case EvqOut:           return "out";
-      case EvqInOut:         return "inout";
-      case EvqConstReadOnly: return "const";
-      default: UNREACHABLE();
-    }
-
-    return "";
-}
-
-TString OutputHLSL::typeString(const TType &type)
-{
-    if (type.getBasicType() == EbtStruct)
-    {
-        const TString& typeName = type.getStruct()->name();
-        if (typeName != "")
-        {
-            return structLookup(typeName);
-        }
-        else   // Nameless structure, define in place
-        {
-            const TFieldList &fields = type.getStruct()->fields();
-
-            TString string = "struct\n"
-                             "{\n";
-
-            for (unsigned int i = 0; i < fields.size(); i++)
-            {
-                const TField *field = fields[i];
-
-                string += "    " + typeString(*field->type()) + " " + decorate(field->name()) + arrayString(*field->type()) + ";\n";
-            }
-
-            string += "} ";
-
-            return string;
-        }
-    }
-    else if (type.isMatrix())
-    {
-        switch (type.getNominalSize())
-        {
-          case 2: return "float2x2";
-          case 3: return "float3x3";
-          case 4: return "float4x4";
-        }
-    }
-    else
-    {
-        switch (type.getBasicType())
-        {
-          case EbtFloat:
-            switch (type.getNominalSize())
-            {
-              case 1: return "float";
-              case 2: return "float2";
-              case 3: return "float3";
-              case 4: return "float4";
-            }
-          case EbtInt:
-            switch (type.getNominalSize())
-            {
-              case 1: return "int";
-              case 2: return "int2";
-              case 3: return "int3";
-              case 4: return "int4";
-            }
-          case EbtBool:
-            switch (type.getNominalSize())
-            {
-              case 1: return "bool";
-              case 2: return "bool2";
-              case 3: return "bool3";
-              case 4: return "bool4";
-            }
-          case EbtVoid:
-            return "void";
-          case EbtSampler2D:
-            return "sampler2D";
-          case EbtSamplerCube:
-            return "samplerCUBE";
-          case EbtSamplerExternalOES:
-            return "sampler2D";
-          default:
-            break;
-        }
-    }
-
-    UNREACHABLE();
-    return "<unknown type>";
-}
-
-TString OutputHLSL::textureString(const TType &type)
-{
-    switch (type.getBasicType())
-    {
-      case EbtSampler2D:
-        return "Texture2D";
-      case EbtSamplerCube:
-        return "TextureCube";
-      case EbtSamplerExternalOES:
-        return "Texture2D";
-      default:
-        break;
-    }
-
-    UNREACHABLE();
-    return "<unknown texture type>";
-}
-
-TString OutputHLSL::arrayString(const TType &type)
-{
-    if (!type.isArray())
-    {
-        return "";
+        return QualifierString(qualifier) + " " + TextureString(type) + " texture_" + name + ArrayString(type) + ", " +
+               QualifierString(qualifier) + " " + SamplerString(type) + " sampler_" + name + ArrayString(type);
     }
 
-    return "[" + str(type.getArraySize()) + "]";
+    return QualifierString(qualifier) + " " + TypeString(type) + " " + name + ArrayString(type);
 }
 
 TString OutputHLSL::initializer(const TType &type)
@@ -2599,235 +2801,40 @@ TString OutputHLSL::initializer(const TType &type)
     return "{" + string + "}";
 }
 
-void OutputHLSL::addConstructor(const TType &type, const TString &name, const TIntermSequence *parameters)
+void OutputHLSL::outputConstructor(Visit visit, const TType &type, const TString &name, const TIntermSequence *parameters)
 {
-    if (name == "")
-    {
-        return;   // Nameless structures don't have constructors
-    }
-
-    if (type.getStruct() && mStructNames.find(decorate(name)) != mStructNames.end())
-    {
-        return;   // Already added
-    }
-
-    TType ctorType = type;
-    ctorType.clearArrayness();
-    ctorType.setPrecision(EbpHigh);
-    ctorType.setQualifier(EvqTemporary);
-
-    TString ctorName = type.getStruct() ? decorate(name) : name;
-
-    typedef std::vector<TType> ParameterArray;
-    ParameterArray ctorParameters;
-
-    if (type.getStruct())
-    {
-        mStructNames.insert(decorate(name));
-
-        TString structure;
-        structure += "struct " + decorate(name) + "\n"
-                     "{\n";
-
-        const TFieldList &fields = type.getStruct()->fields();
-
-        for (unsigned int i = 0; i < fields.size(); i++)
-        {
-            const TField *field = fields[i];
-
-            structure += "    " + typeString(*field->type()) + " " + decorateField(field->name(), type) + arrayString(*field->type()) + ";\n";
-        }
-
-        structure += "};\n";
-
-        if (std::find(mStructDeclarations.begin(), mStructDeclarations.end(), structure) == mStructDeclarations.end())
-        {
-            mStructDeclarations.push_back(structure);
-        }
-
-        for (unsigned int i = 0; i < fields.size(); i++)
-        {
-            ctorParameters.push_back(*fields[i]->type());
-        }
-    }
-    else if (parameters)
-    {
-        for (TIntermSequence::const_iterator parameter = parameters->begin(); parameter != parameters->end(); parameter++)
-        {
-            ctorParameters.push_back((*parameter)->getAsTyped()->getType());
-        }
-    }
-    else UNREACHABLE();
-
-    TString constructor;
-
-    if (ctorType.getStruct())
-    {
-        constructor += ctorName + " " + ctorName + "_ctor(";
-    }
-    else   // Built-in type
-    {
-        constructor += typeString(ctorType) + " " + ctorName + "(";
-    }
-
-    for (unsigned int parameter = 0; parameter < ctorParameters.size(); parameter++)
-    {
-        const TType &type = ctorParameters[parameter];
-
-        constructor += typeString(type) + " x" + str(parameter) + arrayString(type);
-
-        if (parameter < ctorParameters.size() - 1)
-        {
-            constructor += ", ";
-        }
-    }
-
-    constructor += ")\n"
-                   "{\n";
-
-    if (ctorType.getStruct())
-    {
-        constructor += "    " + ctorName + " structure = {";
-    }
-    else
-    {
-        constructor += "    return " + typeString(ctorType) + "(";
-    }
-
-    if (ctorType.isMatrix() && ctorParameters.size() == 1)
-    {
-        int dim = ctorType.getNominalSize();
-        const TType &parameter = ctorParameters[0];
-
-        if (parameter.isScalar())
-        {
-            for (int row = 0; row < dim; row++)
-            {
-                for (int col = 0; col < dim; col++)
-                {
-                    constructor += TString((row == col) ? "x0" : "0.0");
-                    
-                    if (row < dim - 1 || col < dim - 1)
-                    {
-                        constructor += ", ";
-                    }
-                }
-            }
-        }
-        else if (parameter.isMatrix())
-        {
-            for (int row = 0; row < dim; row++)
-            {
-                for (int col = 0; col < dim; col++)
-                {
-                    if (row < parameter.getNominalSize() && col < parameter.getNominalSize())
-                    {
-                        constructor += TString("x0") + "[" + str(row) + "]" + "[" + str(col) + "]";
-                    }
-                    else
-                    {
-                        constructor += TString((row == col) ? "1.0" : "0.0");
-                    }
+    TInfoSinkBase &out = mBody;
 
-                    if (row < dim - 1 || col < dim - 1)
-                    {
-                        constructor += ", ";
-                    }
-                }
-            }
-        }
-        else UNREACHABLE();
-    }
-    else
+    if (visit == PreVisit)
     {
-        size_t remainingComponents = ctorType.getObjectSize();
-        size_t parameterIndex = 0;
-
-        while (remainingComponents > 0)
-        {
-            const TType &parameter = ctorParameters[parameterIndex];
-            const size_t parameterSize = parameter.getObjectSize();
-            bool moreParameters = parameterIndex + 1 < ctorParameters.size();
-
-            constructor += "x" + str(parameterIndex);
-
-            if (parameter.isScalar())
-            {
-                ASSERT(parameterSize <= remainingComponents);
-                remainingComponents -= parameterSize;
-            }
-            else if (parameter.isVector())
-            {
-                if (remainingComponents == parameterSize || moreParameters)
-                {
-                    ASSERT(parameterSize <= remainingComponents);
-                    remainingComponents -= parameterSize;
-                }
-                else if (remainingComponents < static_cast<size_t>(parameter.getNominalSize()))
-                {
-                    switch (remainingComponents)
-                    {
-                      case 1: constructor += ".x";    break;
-                      case 2: constructor += ".xy";   break;
-                      case 3: constructor += ".xyz";  break;
-                      case 4: constructor += ".xyzw"; break;
-                      default: UNREACHABLE();
-                    }
-
-                    remainingComponents = 0;
-                }
-                else UNREACHABLE();
-            }
-            else if (parameter.isMatrix() || parameter.getStruct())
-            {
-                ASSERT(remainingComponents == parameterSize || moreParameters);
-                ASSERT(parameterSize <= remainingComponents);
-                
-                remainingComponents -= parameterSize;
-            }
-            else UNREACHABLE();
-
-            if (moreParameters)
-            {
-                parameterIndex++;
-            }
+        mStructureHLSL->addConstructor(type, name, parameters);
 
-            if (remainingComponents)
-            {
-                constructor += ", ";
-            }
-        }
+        out << name + "(";
     }
-
-    if (ctorType.getStruct())
+    else if (visit == InVisit)
     {
-        constructor += "};\n"
-                       "    return structure;\n"
-                       "}\n";
+        out << ", ";
     }
-    else
+    else if (visit == PostVisit)
     {
-        constructor += ");\n"
-                       "}\n";
+        out << ")";
     }
-
-    mConstructors.insert(constructor);
 }
 
 const ConstantUnion *OutputHLSL::writeConstantUnion(const TType &type, const ConstantUnion *constUnion)
 {
     TInfoSinkBase &out = mBody;
 
-    if (type.getBasicType() == EbtStruct)
+    const TStructure* structure = type.getStruct();
+    if (structure)
     {
-        out << structLookup(type.getStruct()->name()) + "_ctor(";
-        
-        const TFieldList &fields = type.getStruct()->fields();
+        out << StructNameString(*structure) + "_ctor(";
+
+        const TFieldList& fields = structure->fields();
 
         for (size_t i = 0; i < fields.size(); i++)
         {
             const TType *fieldType = fields[i]->type();
-
             constUnion = writeConstantUnion(*fieldType, constUnion);
 
             if (i != fields.size() - 1)
@@ -2842,10 +2849,10 @@ const ConstantUnion *OutputHLSL::writeConstantUnion(const TType &type, const Con
     {
         size_t size = type.getObjectSize();
         bool writeType = size > 1;
-        
+
         if (writeType)
         {
-            out << typeString(type) << "(";
+            out << TypeString(type) << "(";
         }
 
         for (size_t i = 0; i < size; i++, constUnion++)
@@ -2854,6 +2861,7 @@ const ConstantUnion *OutputHLSL::writeConstantUnion(const TType &type, const Con
             {
               case EbtFloat: out << std::min(FLT_MAX, std::max(-FLT_MAX, constUnion->getFConst())); break;
               case EbtInt:   out << constUnion->getIConst(); break;
+              case EbtUInt:  out << constUnion->getUConst(); break;
               case EbtBool:  out << constUnion->getBConst(); break;
               default: UNREACHABLE();
             }
@@ -2873,266 +2881,4 @@ const ConstantUnion *OutputHLSL::writeConstantUnion(const TType &type, const Con
     return constUnion;
 }
 
-TString OutputHLSL::scopeString(unsigned int depthLimit)
-{
-    TString string;
-
-    for (unsigned int i = 0; i < mScopeBracket.size() && i < depthLimit; i++)
-    {
-        string += "_" + str(i);
-    }
-
-    return string;
-}
-
-TString OutputHLSL::scopedStruct(const TString &typeName)
-{
-    if (typeName == "")
-    {
-        return typeName;
-    }
-
-    return typeName + scopeString(mScopeDepth);
-}
-
-TString OutputHLSL::structLookup(const TString &typeName)
-{
-    for (int depth = mScopeDepth; depth >= 0; depth--)
-    {
-        TString scopedName = decorate(typeName + scopeString(depth));
-
-        for (StructNames::iterator structName = mStructNames.begin(); structName != mStructNames.end(); structName++)
-        {
-            if (*structName == scopedName)
-            {
-                return scopedName;
-            }
-        }
-    }
-
-    UNREACHABLE();   // Should have found a matching constructor
-
-    return typeName;
-}
-
-TString OutputHLSL::decorate(const TString &string)
-{
-    if (string.compare(0, 3, "gl_") != 0 && string.compare(0, 3, "dx_") != 0)
-    {
-        return "_" + string;
-    }
-    
-    return string;
-}
-
-TString OutputHLSL::decorateUniform(const TString &string, const TType &type)
-{
-    if (type.getBasicType() == EbtSamplerExternalOES)
-    {
-        return "ex_" + string;
-    }
-    
-    return decorate(string);
-}
-
-TString OutputHLSL::decorateField(const TString &string, const TType &structure)
-{
-    if (structure.getStruct()->name().compare(0, 3, "gl_") != 0)
-    {
-        return decorate(string);
-    }
-
-    return string;
-}
-
-TString OutputHLSL::registerString(TIntermSymbol *operand)
-{
-    ASSERT(operand->getQualifier() == EvqUniform);
-
-    if (IsSampler(operand->getBasicType()))
-    {
-        return "s" + str(samplerRegister(operand));
-    }
-
-    return "c" + str(uniformRegister(operand));
-}
-
-int OutputHLSL::samplerRegister(TIntermSymbol *sampler)
-{
-    const TType &type = sampler->getType();
-    ASSERT(IsSampler(type.getBasicType()));
-
-    int index = mSamplerRegister;
-    mSamplerRegister += sampler->totalRegisterCount();
-
-    declareUniform(type, sampler->getSymbol(), index);
-
-    return index;
-}
-
-int OutputHLSL::uniformRegister(TIntermSymbol *uniform)
-{
-    const TType &type = uniform->getType();
-    ASSERT(!IsSampler(type.getBasicType()));
-
-    int index = mUniformRegister;
-    mUniformRegister += uniform->totalRegisterCount();
-
-    declareUniform(type, uniform->getSymbol(), index);
-
-    return index;
-}
-
-void OutputHLSL::declareUniform(const TType &type, const TString &name, int index)
-{
-    TStructure *structure = type.getStruct();
-
-    if (!structure)
-    {
-        mActiveUniforms.push_back(Uniform(glVariableType(type), glVariablePrecision(type), name.c_str(), type.getArraySize(), index));
-    }
-    else
-    {
-        const TFieldList &fields = structure->fields();
-
-        if (type.isArray())
-        {
-            int elementIndex = index;
-
-            for (int i = 0; i < type.getArraySize(); i++)
-            {
-                for (size_t j = 0; j < fields.size(); j++)
-                {
-                    const TType &fieldType = *fields[j]->type();
-                    const TString uniformName = name + "[" + str(i) + "]." + fields[j]->name();
-                    declareUniform(fieldType, uniformName, elementIndex);
-                    elementIndex += fieldType.totalRegisterCount();
-                }
-            }
-        }
-        else
-        {
-            int fieldIndex = index;
-
-            for (size_t i = 0; i < fields.size(); i++)
-            {
-                const TType &fieldType = *fields[i]->type();
-                const TString uniformName = name + "." + fields[i]->name();
-                declareUniform(fieldType, uniformName, fieldIndex);
-                fieldIndex += fieldType.totalRegisterCount();
-            }
-        }
-    }
-}
-
-GLenum OutputHLSL::glVariableType(const TType &type)
-{
-    if (type.getBasicType() == EbtFloat)
-    {
-        if (type.isScalar())
-        {
-            return GL_FLOAT;
-        }
-        else if (type.isVector())
-        {
-            switch(type.getNominalSize())
-            {
-              case 2: return GL_FLOAT_VEC2;
-              case 3: return GL_FLOAT_VEC3;
-              case 4: return GL_FLOAT_VEC4;
-              default: UNREACHABLE();
-            }
-        }
-        else if (type.isMatrix())
-        {
-            switch(type.getNominalSize())
-            {
-              case 2: return GL_FLOAT_MAT2;
-              case 3: return GL_FLOAT_MAT3;
-              case 4: return GL_FLOAT_MAT4;
-              default: UNREACHABLE();
-            }
-        }
-        else UNREACHABLE();
-    }
-    else if (type.getBasicType() == EbtInt)
-    {
-        if (type.isScalar())
-        {
-            return GL_INT;
-        }
-        else if (type.isVector())
-        {
-            switch(type.getNominalSize())
-            {
-              case 2: return GL_INT_VEC2;
-              case 3: return GL_INT_VEC3;
-              case 4: return GL_INT_VEC4;
-              default: UNREACHABLE();
-            }
-        }
-        else UNREACHABLE();
-    }
-    else if (type.getBasicType() == EbtBool)
-    {
-        if (type.isScalar())
-        {
-            return GL_BOOL;
-        }
-        else if (type.isVector())
-        {
-            switch(type.getNominalSize())
-            {
-              case 2: return GL_BOOL_VEC2;
-              case 3: return GL_BOOL_VEC3;
-              case 4: return GL_BOOL_VEC4;
-              default: UNREACHABLE();
-            }
-        }
-        else UNREACHABLE();
-    }
-    else if (type.getBasicType() == EbtSampler2D)
-    {
-        return GL_SAMPLER_2D;
-    }
-    else if (type.getBasicType() == EbtSamplerCube)
-    {
-        return GL_SAMPLER_CUBE;
-    }
-    else UNREACHABLE();
-
-    return GL_NONE;
-}
-
-GLenum OutputHLSL::glVariablePrecision(const TType &type)
-{
-    if (type.getBasicType() == EbtFloat)
-    {
-        switch (type.getPrecision())
-        {
-          case EbpHigh:   return GL_HIGH_FLOAT;
-          case EbpMedium: return GL_MEDIUM_FLOAT;
-          case EbpLow:    return GL_LOW_FLOAT;
-          case EbpUndefined:
-            // Should be defined as the default precision by the parser
-          default: UNREACHABLE();
-        }
-    }
-    else if (type.getBasicType() == EbtInt)
-    {
-        switch (type.getPrecision())
-        {
-          case EbpHigh:   return GL_HIGH_INT;
-          case EbpMedium: return GL_MEDIUM_INT;
-          case EbpLow:    return GL_LOW_INT;
-          case EbpUndefined:
-            // Should be defined as the default precision by the parser
-          default: UNREACHABLE();
-        }
-    }
-
-    // Other types (boolean, sampler) don't have a precision
-    return GL_NONE;
-}
-
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/OutputHLSL.h b/src/3rdparty/angle/src/compiler/translator/OutputHLSL.h
index 3afd8e9ada..bec02479bb 100644
--- a/src/3rdparty/angle/src/compiler/translator/OutputHLSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/OutputHLSL.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,42 +11,40 @@
 #include <set>
 #include <map>
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
+#include "angle_gl.h"
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/ParseContext.h"
-#include "compiler/translator/Uniform.h"
 
 namespace sh
 {
 class UnfoldShortCircuit;
+class StructureHLSL;
+class UniformHLSL;
+
+typedef std::map<TString, TIntermSymbol*> ReferencedSymbols;
 
 class OutputHLSL : public TIntermTraverser
 {
   public:
-    OutputHLSL(TParseContext &context, const ShBuiltInResources& resources, ShShaderOutput outputType);
+    OutputHLSL(TParseContext &context, TranslatorHLSL *parentTranslator);
     ~OutputHLSL();
 
     void output();
 
     TInfoSinkBase &getBodyStream();
-    const ActiveUniforms &getUniforms();
 
-    TString typeString(const TType &type);
-    TString textureString(const TType &type);
-    static TString qualifierString(TQualifier qualifier);
-    static TString arrayString(const TType &type);
+    const std::map<std::string, unsigned int> &getInterfaceBlockRegisterMap() const;
+    const std::map<std::string, unsigned int> &getUniformRegisterMap() const;
+
     static TString initializer(const TType &type);
-    static TString decorate(const TString &string);                      // Prepends an underscore to avoid naming clashes
-    static TString decorateUniform(const TString &string, const TType &type);
-    static TString decorateField(const TString &string, const TType &structure);
 
   protected:
     void header();
 
     // Visit AST nodes and output their code to the body stream
     void visitSymbol(TIntermSymbol*);
+    void visitRaw(TIntermRaw*);
     void visitConstantUnion(TIntermConstantUnion*);
     bool visitBinary(Visit visit, TIntermBinary*);
     bool visitUnary(Visit visit, TIntermUnary*);
@@ -63,13 +61,9 @@ class OutputHLSL : public TIntermTraverser
     TString argumentString(const TIntermSymbol *symbol);
     int vectorSize(const TType &type) const;
 
-    void addConstructor(const TType &type, const TString &name, const TIntermSequence *parameters);
+    void outputConstructor(Visit visit, const TType &type, const TString &name, const TIntermSequence *parameters);
     const ConstantUnion *writeConstantUnion(const TType &type, const ConstantUnion *constUnion);
 
-    TString scopeString(unsigned int depthLimit);
-    TString scopedStruct(const TString &typeName);
-    TString structLookup(const TString &typeName);
-
     TParseContext &mContext;
     const ShShaderOutput mOutputType;
     UnfoldShortCircuit *mUnfoldShortCircuit;
@@ -80,27 +74,44 @@ class OutputHLSL : public TIntermTraverser
     TInfoSinkBase mBody;
     TInfoSinkBase mFooter;
 
-    typedef std::map<TString, TIntermSymbol*> ReferencedSymbols;
     ReferencedSymbols mReferencedUniforms;
+    ReferencedSymbols mReferencedInterfaceBlocks;
     ReferencedSymbols mReferencedAttributes;
     ReferencedSymbols mReferencedVaryings;
+    ReferencedSymbols mReferencedOutputVariables;
+
+    StructureHLSL *mStructureHLSL;
+    UniformHLSL *mUniformHLSL;
+
+    struct TextureFunction
+    {
+        enum Method
+        {
+            IMPLICIT,   // Mipmap LOD determined implicitly (standard lookup)
+            BIAS,
+            LOD,
+            LOD0,
+            LOD0BIAS,
+            SIZE,   // textureSize()
+            FETCH,
+            GRAD
+        };
+
+        TBasicType sampler;
+        int coords;
+        bool proj;
+        bool offset;
+        Method method;
+
+        TString name() const;
+
+        bool operator<(const TextureFunction &rhs) const;
+    };
+
+    typedef std::set<TextureFunction> TextureFunctionSet;
 
     // Parameters determining what goes in the header output
-    bool mUsesTexture2D;
-    bool mUsesTexture2D_bias;
-    bool mUsesTexture2DLod;
-    bool mUsesTexture2DProj;
-    bool mUsesTexture2DProj_bias;
-    bool mUsesTexture2DProjLod;
-    bool mUsesTextureCube;
-    bool mUsesTextureCube_bias;
-    bool mUsesTextureCubeLod;
-    bool mUsesTexture2DLod0;
-    bool mUsesTexture2DLod0_bias;
-    bool mUsesTexture2DProjLod0;
-    bool mUsesTexture2DProjLod0_bias;
-    bool mUsesTextureCubeLod0;
-    bool mUsesTextureCubeLod0_bias;
+    TextureFunctionSet mUsesTexture;
     bool mUsesFragColor;
     bool mUsesFragData;
     bool mUsesDepthRange;
@@ -126,42 +137,27 @@ class OutputHLSL : public TIntermTraverser
     bool mUsesAtan2_3;
     bool mUsesAtan2_4;
     bool mUsesDiscardRewriting;
+    bool mUsesNestedBreak;
 
     int mNumRenderTargets;
 
-    typedef std::set<TString> Constructors;
-    Constructors mConstructors;
-
-    typedef std::set<TString> StructNames;
-    StructNames mStructNames;
-
-    typedef std::list<TString> StructDeclarations;
-    StructDeclarations mStructDeclarations;
-
-    typedef std::vector<int> ScopeBracket;
-    ScopeBracket mScopeBracket;
-    unsigned int mScopeDepth;
-
     int mUniqueIndex;   // For creating unique names
 
     bool mContainsLoopDiscontinuity;
     bool mOutputLod0Function;
     bool mInsideDiscontinuousLoop;
+    int mNestedLoopDepth;
 
     TIntermSymbol *mExcessiveLoopIndex;
 
-    int mUniformRegister;
-    int mSamplerRegister;
+    TString structInitializerString(int indent, const TStructure &structure, const TString &rhsStructName);
 
-    TString registerString(TIntermSymbol *operand);
-    int samplerRegister(TIntermSymbol *sampler);
-    int uniformRegister(TIntermSymbol *uniform);
-    void declareUniform(const TType &type, const TString &name, int index);
-    static GLenum glVariableType(const TType &type);
-    static GLenum glVariablePrecision(const TType &type);
+    std::map<TIntermTyped*, TString> mFlaggedStructMappedNames;
+    std::map<TIntermTyped*, TString> mFlaggedStructOriginalNames;
 
-    ActiveUniforms mActiveUniforms;
+    void makeFlaggedStructMaps(const std::vector<TIntermTyped *> &flaggedStructs);
 };
+
 }
 
 #endif   // COMPILER_OUTPUTHLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/ParseContext.cpp b/src/3rdparty/angle/src/compiler/translator/ParseContext.cpp
index 1a1e0d140c..ff0a49667c 100644
--- a/src/3rdparty/angle/src/compiler/translator/ParseContext.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/ParseContext.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -115,7 +115,7 @@ bool TParseContext::parseVectorFields(const TString& compString, int vecSize, TV
 // Look at a '.' field selector string and change it into offsets
 // for a matrix.
 //
-bool TParseContext::parseMatrixFields(const TString& compString, int matSize, TMatrixFields& fields, const TSourceLoc& line)
+bool TParseContext::parseMatrixFields(const TString& compString, int matCols, int matRows, TMatrixFields& fields, const TSourceLoc& line)
 {
     fields.wholeRow = false;
     fields.wholeCol = false;
@@ -151,7 +151,7 @@ bool TParseContext::parseMatrixFields(const TString& compString, int matSize, TM
         fields.col = compString[1] - '0';
     }
 
-    if (fields.row >= matSize || fields.col >= matSize) {
+    if (fields.row >= matRows || fields.col >= matCols) {
         error(line, "matrix field selection out of range", compString.c_str());
         return false;
     }
@@ -277,6 +277,7 @@ bool TParseContext::lValueErrorCheck(const TSourceLoc& line, const char* op, TIn
         case EOpIndexDirect:
         case EOpIndexIndirect:
         case EOpIndexDirectStruct:
+        case EOpIndexDirectInterfaceBlock:
             return lValueErrorCheck(line, op, binaryNode->getLeft());
         case EOpVectorSwizzle:
             errorReturn = lValueErrorCheck(line, op, binaryNode->getLeft());
@@ -285,21 +286,21 @@ bool TParseContext::lValueErrorCheck(const TSourceLoc& line, const char* op, TIn
 
                 TIntermTyped* rightNode = binaryNode->getRight();
                 TIntermAggregate *aggrNode = rightNode->getAsAggregate();
-                
-                for (TIntermSequence::iterator p = aggrNode->getSequence().begin(); 
-                                               p != aggrNode->getSequence().end(); p++) {
+
+                for (TIntermSequence::iterator p = aggrNode->getSequence()->begin();
+                                               p != aggrNode->getSequence()->end(); p++) {
                     int value = (*p)->getAsTyped()->getAsConstantUnion()->getIConst(0);
-                    offset[value]++;     
+                    offset[value]++;
                     if (offset[value] > 1) {
                         error(line, " l-value of swizzle cannot have duplicate components", op);
 
                         return true;
                     }
                 }
-            } 
+            }
 
             return errorReturn;
-        default: 
+        default:
             break;
         }
         error(line, " l-value required", op);
@@ -317,6 +318,8 @@ bool TParseContext::lValueErrorCheck(const TSourceLoc& line, const char* op, TIn
     case EvqConst:          message = "can't modify a const";        break;
     case EvqConstReadOnly:  message = "can't modify a const";        break;
     case EvqAttribute:      message = "can't modify an attribute";   break;
+    case EvqFragmentIn:     message = "can't modify an input";       break;
+    case EvqVertexIn:       message = "can't modify an input";       break;
     case EvqUniform:        message = "can't modify a uniform";      break;
     case EvqVaryingIn:      message = "can't modify a varying";      break;
     case EvqFragCoord:      message = "can't modify gl_FragCoord";   break;
@@ -327,16 +330,11 @@ bool TParseContext::lValueErrorCheck(const TSourceLoc& line, const char* op, TIn
         //
         // Type that can't be written to?
         //
-        switch (node->getBasicType()) {
-        case EbtSampler2D:
-        case EbtSamplerCube:
-            message = "can't modify a sampler";
-            break;
-        case EbtVoid:
+        if (node->getBasicType() == EbtVoid) {
             message = "can't modify void";
-            break;
-        default: 
-            break;
+        }
+        if (IsSampler(node->getBasicType())) {
+            message = "can't modify a sampler";
         }
     }
 
@@ -396,7 +394,7 @@ bool TParseContext::constErrorCheck(TIntermTyped* node)
 //
 bool TParseContext::integerErrorCheck(TIntermTyped* node, const char* token)
 {
-    if (node->getBasicType() == EbtInt && node->getNominalSize() == 1)
+    if (node->isScalarInt())
         return false;
 
     error(node->getLine(), "integer expression required", token);
@@ -437,7 +435,7 @@ bool TParseContext::reservedErrorCheck(const TSourceLoc& line, const TString& id
             error(line, reservedErrMsg, "gl_");
             return true;
         }
-        if (isWebGLBasedSpec(shaderSpec)) {
+        if (IsWebGLBasedSpec(shaderSpec)) {
             if (identifier.compare(0, 6, "webgl_") == 0) {
                 error(line, reservedErrMsg, "webgl_");
                 return true;
@@ -599,7 +597,7 @@ bool TParseContext::boolErrorCheck(const TSourceLoc& line, const TIntermTyped* t
 //
 bool TParseContext::boolErrorCheck(const TSourceLoc& line, const TPublicType& pType)
 {
-    if (pType.type != EbtBool || pType.array || pType.matrix || (pType.size > 1)) {
+    if (pType.type != EbtBool || pType.isAggregate()) {
         error(line, "boolean expression expected", "");
         return true;
     } 
@@ -628,11 +626,20 @@ bool TParseContext::samplerErrorCheck(const TSourceLoc& line, const TPublicType&
 
 bool TParseContext::structQualifierErrorCheck(const TSourceLoc& line, const TPublicType& pType)
 {
-    if ((pType.qualifier == EvqVaryingIn || pType.qualifier == EvqVaryingOut || pType.qualifier == EvqAttribute) &&
-        pType.type == EbtStruct) {
-        error(line, "cannot be used with a structure", getQualifierString(pType.qualifier));
-        
-        return true;
+    switch (pType.qualifier)
+    {
+      case EvqVaryingIn:
+      case EvqVaryingOut:
+      case EvqAttribute:
+      case EvqVertexIn:
+      case EvqFragmentOut:
+        if (pType.type == EbtStruct)
+        {
+            error(line, "cannot be used with a structure", getQualifierString(pType.qualifier));
+            return true;
+        }
+
+      default: break;
     }
 
     if (pType.qualifier != EvqUniform && samplerErrorCheck(line, pType, "samplers must be uniform"))
@@ -641,6 +648,17 @@ bool TParseContext::structQualifierErrorCheck(const TSourceLoc& line, const TPub
     return false;
 }
 
+bool TParseContext::locationDeclaratorListCheck(const TSourceLoc& line, const TPublicType &pType)
+{
+    if (pType.layoutQualifier.location != -1)
+    {
+        error(line, "location must only be specified for a single input or output variable", "location");
+        return true;
+    }
+
+    return false;
+}
+
 bool TParseContext::parameterSamplerErrorCheck(const TSourceLoc& line, TQualifier qualifier, const TType& type)
 {
     if ((qualifier == EvqOut || qualifier == EvqInOut) && 
@@ -657,7 +675,7 @@ bool TParseContext::containsSampler(TType& type)
     if (IsSampler(type.getBasicType()))
         return true;
 
-    if (type.getBasicType() == EbtStruct) {
+    if (type.getBasicType() == EbtStruct || type.isInterfaceBlock()) {
         const TFieldList& fields = type.getStruct()->fields();
         for (unsigned int i = 0; i < fields.size(); ++i) {
             if (containsSampler(*fields[i]->type()))
@@ -676,15 +694,49 @@ bool TParseContext::containsSampler(TType& type)
 bool TParseContext::arraySizeErrorCheck(const TSourceLoc& line, TIntermTyped* expr, int& size)
 {
     TIntermConstantUnion* constant = expr->getAsConstantUnion();
-    if (constant == 0 || constant->getBasicType() != EbtInt) {
+
+    if (constant == 0 || !constant->isScalarInt())
+    {
         error(line, "array size must be a constant integer expression", "");
         return true;
     }
 
-    size = constant->getIConst(0);
+    unsigned int unsignedSize = 0;
 
-    if (size <= 0) {
-        error(line, "array size must be a positive integer", "");
+    if (constant->getBasicType() == EbtUInt)
+    {
+        unsignedSize = constant->getUConst(0);
+        size = static_cast<int>(unsignedSize);
+    }
+    else
+    {
+        size = constant->getIConst(0);
+
+        if (size < 0)
+        {
+            error(line, "array size must be non-negative", "");
+            size = 1;
+            return true;
+        }
+
+        unsignedSize = static_cast<unsigned int>(size);
+    }
+
+    if (size == 0)
+    {
+        error(line, "array size must be greater than zero", "");
+        size = 1;
+        return true;
+    }
+
+    // The size of arrays is restricted here to prevent issues further down the
+    // compiler/translator/driver stack. Shader Model 5 generation hardware is limited to
+    // 4096 registers so this should be reasonable even for aggressively optimizable code.
+    const unsigned int sizeLimit = 65536;
+
+    if (unsignedSize > sizeLimit)
+    {
+        error(line, "array size too large", "");
         size = 1;
         return true;
     }
@@ -699,7 +751,7 @@ bool TParseContext::arraySizeErrorCheck(const TSourceLoc& line, TIntermTyped* ex
 //
 bool TParseContext::arrayQualifierErrorCheck(const TSourceLoc& line, TPublicType type)
 {
-    if ((type.qualifier == EvqAttribute) || (type.qualifier == EvqConst)) {
+    if ((type.qualifier == EvqAttribute) || (type.qualifier == EvqVertexIn) || (type.qualifier == EvqConst)) {
         error(line, "cannot declare arrays of this qualifier", TType(type).getCompleteString().c_str());
         return true;
     }
@@ -733,7 +785,7 @@ bool TParseContext::arrayTypeErrorCheck(const TSourceLoc& line, TPublicType type
 //
 // Returns true if there was an error.
 //
-bool TParseContext::arrayErrorCheck(const TSourceLoc& line, TString& identifier, TPublicType type, TVariable*& variable)
+bool TParseContext::arrayErrorCheck(const TSourceLoc& line, const TString& identifier, const TPublicType &type, TVariable*& variable)
 {
     //
     // Don't check for reserved word use until after we know it's not in the symbol table,
@@ -742,7 +794,7 @@ bool TParseContext::arrayErrorCheck(const TSourceLoc& line, TString& identifier,
 
     bool builtIn = false; 
     bool sameScope = false;
-    TSymbol* symbol = symbolTable.find(identifier, &builtIn, &sameScope);
+    TSymbol* symbol = symbolTable.find(identifier, 0, &builtIn, &sameScope);
     if (symbol == 0 || !sameScope) {
         if (reservedErrorCheck(line, identifier))
             return true;
@@ -752,7 +804,7 @@ bool TParseContext::arrayErrorCheck(const TSourceLoc& line, TString& identifier,
         if (type.arraySize)
             variable->getType().setArraySize(type.arraySize);
 
-        if (! symbolTable.insert(*variable)) {
+        if (! symbolTable.declare(variable)) {
             delete variable;
             error(line, "INTERNAL ERROR inserting new symbol", identifier.c_str());
             return true;
@@ -793,7 +845,7 @@ bool TParseContext::arrayErrorCheck(const TSourceLoc& line, TString& identifier,
 //
 // Returns true if there was an error.
 //
-bool TParseContext::nonInitConstErrorCheck(const TSourceLoc& line, TString& identifier, TPublicType& type, bool array)
+bool TParseContext::nonInitConstErrorCheck(const TSourceLoc& line, const TString& identifier, TPublicType& type, bool array)
 {
     if (type.qualifier == EvqConst)
     {
@@ -825,14 +877,14 @@ bool TParseContext::nonInitConstErrorCheck(const TSourceLoc& line, TString& iden
 //
 // Returns true if there was an error.
 //
-bool TParseContext::nonInitErrorCheck(const TSourceLoc& line, TString& identifier, TPublicType& type, TVariable*& variable)
+bool TParseContext::nonInitErrorCheck(const TSourceLoc& line, const TString& identifier, const TPublicType& type, TVariable*& variable)
 {
     if (reservedErrorCheck(line, identifier))
         recover();
 
     variable = new TVariable(&identifier, TType(type));
 
-    if (! symbolTable.insert(*variable)) {
+    if (! symbolTable.declare(variable)) {
         error(line, "redefinition", variable->getName().c_str());
         delete variable;
         variable = 0;
@@ -885,6 +937,45 @@ bool TParseContext::extensionErrorCheck(const TSourceLoc& line, const TString& e
     return false;
 }
 
+bool TParseContext::singleDeclarationErrorCheck(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier)
+{
+    if (structQualifierErrorCheck(identifierLocation, publicType))
+        return true;
+
+    // check for layout qualifier issues
+    const TLayoutQualifier layoutQualifier = publicType.layoutQualifier;
+
+    if (layoutQualifier.matrixPacking != EmpUnspecified)
+    {
+        error(identifierLocation, "layout qualifier", getMatrixPackingString(layoutQualifier.matrixPacking), "only valid for interface blocks");
+        return true;
+    }
+
+    if (layoutQualifier.blockStorage != EbsUnspecified)
+    {
+        error(identifierLocation, "layout qualifier", getBlockStorageString(layoutQualifier.blockStorage), "only valid for interface blocks");
+        return true;
+    }
+
+    if (publicType.qualifier != EvqVertexIn && publicType.qualifier != EvqFragmentOut && layoutLocationErrorCheck(identifierLocation, publicType.layoutQualifier))
+    {
+        return true;
+    }
+
+    return false;
+}
+
+bool TParseContext::layoutLocationErrorCheck(const TSourceLoc& location, const TLayoutQualifier &layoutQualifier)
+{
+    if (layoutQualifier.location != -1)
+    {
+        error(location, "invalid layout qualifier:", "location", "only valid on program inputs and outputs");
+        return true;
+    }
+
+    return false;
+}
+
 bool TParseContext::supportsExtension(const char* extension)
 {
     const TExtensionBehavior& extbehavior = extensionBehavior();
@@ -905,25 +996,80 @@ bool TParseContext::isExtensionEnabled(const char* extension) const
     return (iter->second == EBhEnable || iter->second == EBhRequire);
 }
 
+void TParseContext::handleExtensionDirective(const TSourceLoc& loc, const char* extName, const char* behavior)
+{
+    pp::SourceLocation srcLoc;
+    srcLoc.file = loc.first_file;
+    srcLoc.line = loc.first_line;
+    directiveHandler.handleExtension(srcLoc, extName, behavior);
+}
+
+void TParseContext::handlePragmaDirective(const TSourceLoc& loc, const char* name, const char* value)
+{
+    pp::SourceLocation srcLoc;
+    srcLoc.file = loc.first_file;
+    srcLoc.line = loc.first_line;
+    directiveHandler.handlePragma(srcLoc, name, value);
+}
+
 /////////////////////////////////////////////////////////////////////////////////
 //
 // Non-Errors.
 //
 /////////////////////////////////////////////////////////////////////////////////
 
+const TVariable *TParseContext::getNamedVariable(const TSourceLoc &location,
+                                                 const TString *name,
+                                                 const TSymbol *symbol)
+{
+    const TVariable *variable = NULL;
+
+    if (!symbol)
+    {
+        error(location, "undeclared identifier", name->c_str());
+        recover();
+    }
+    else if (!symbol->isVariable())
+    {
+        error(location, "variable expected", name->c_str());
+        recover();
+    }
+    else
+    {
+        variable = static_cast<const TVariable*>(symbol);
+
+        if (symbolTable.findBuiltIn(variable->getName(), shaderVersion) &&
+            !variable->getExtension().empty() &&
+            extensionErrorCheck(location, variable->getExtension()))
+        {
+            recover();
+        }
+    }
+
+    if (!variable)
+    {
+        TType type(EbtFloat, EbpUndefined);
+        TVariable *fakeVariable = new TVariable(name, type);
+        symbolTable.declare(fakeVariable);
+        variable = fakeVariable;
+    }
+
+    return variable;
+}
+
 //
 // Look up a function name in the symbol table, and make sure it is a function.
 //
 // Return the function symbol if found, otherwise 0.
 //
-const TFunction* TParseContext::findFunction(const TSourceLoc& line, TFunction* call, bool *builtIn)
+const TFunction* TParseContext::findFunction(const TSourceLoc& line, TFunction* call, int shaderVersion, bool *builtIn)
 {
     // First find by unmangled name to check whether the function name has been
     // hidden by a variable name or struct typename.
     // If a function is found, check for one with a matching argument list.
-    const TSymbol* symbol = symbolTable.find(call->getName(), builtIn);
+    const TSymbol* symbol = symbolTable.find(call->getName(), shaderVersion, builtIn);
     if (symbol == 0 || symbol->isFunction()) {
-        symbol = symbolTable.find(call->getMangledName(), builtIn);
+        symbol = symbolTable.find(call->getMangledName(), shaderVersion, builtIn);
     }
 
     if (symbol == 0) {
@@ -943,7 +1089,9 @@ const TFunction* TParseContext::findFunction(const TSourceLoc& line, TFunction*
 // Initializers show up in several places in the grammar.  Have one set of
 // code to handle them here.
 //
-bool TParseContext::executeInitializer(const TSourceLoc& line, TString& identifier, TPublicType& pType, 
+// Returns true on error, false if no error
+//
+bool TParseContext::executeInitializer(const TSourceLoc& line, const TString& identifier, TPublicType& pType, 
                                        TIntermTyped* initializer, TIntermNode*& intermNode, TVariable* variable)
 {
     TType type = TType(pType);
@@ -959,7 +1107,7 @@ bool TParseContext::executeInitializer(const TSourceLoc& line, TString& identifi
         // add variable to symbol table
         //
         variable = new TVariable(&identifier, type);
-        if (! symbolTable.insert(*variable)) {
+        if (! symbolTable.declare(variable)) {
             error(line, "redefinition", variable->getName().c_str());
             return true;
             // don't delete variable, it's used by error recovery, and the pool 
@@ -997,7 +1145,7 @@ bool TParseContext::executeInitializer(const TSourceLoc& line, TString& identifi
         if (initializer->getAsConstantUnion()) { 
             variable->shareConstPointer(initializer->getAsConstantUnion()->getUnionArrayPointer());
         } else if (initializer->getAsSymbolNode()) {
-            const TSymbol* symbol = symbolTable.find(initializer->getAsSymbolNode()->getSymbol());
+            const TSymbol* symbol = symbolTable.find(initializer->getAsSymbolNode()->getSymbol(), 0);
             const TVariable* tVar = static_cast<const TVariable*>(symbol);
 
             ConstantUnion* constArray = tVar->getConstPointer();
@@ -1035,8 +1183,8 @@ bool TParseContext::areAllChildConst(TIntermAggregate* aggrNode)
 
     // check if all the child nodes are constants so that they can be inserted into 
     // the parent node
-    TIntermSequence &sequence = aggrNode->getSequence() ;
-    for (TIntermSequence::iterator p = sequence.begin(); p != sequence.end(); ++p) {
+    TIntermSequence *sequence = aggrNode->getSequence() ;
+    for (TIntermSequence::iterator p = sequence->begin(); p != sequence->end(); ++p) {
         if (!(*p)->getAsTyped()->getAsConstantUnion())
             return false;
     }
@@ -1044,196 +1192,467 @@ bool TParseContext::areAllChildConst(TIntermAggregate* aggrNode)
     return allConstant;
 }
 
-// This function is used to test for the correctness of the parameters passed to various constructor functions
-// and also convert them to the right datatype if it is allowed and required. 
-//
-// Returns 0 for an error or the constructed node (aggregate or typed) for no error.
-//
-TIntermTyped* TParseContext::addConstructor(TIntermNode* node, const TType* type, TOperator op, TFunction* fnCall, const TSourceLoc& line)
+TPublicType TParseContext::addFullySpecifiedType(TQualifier qualifier, TLayoutQualifier layoutQualifier, const TPublicType& typeSpecifier)
 {
-    if (node == 0)
-        return 0;
+    TPublicType returnType = typeSpecifier;
+    returnType.qualifier = qualifier;
+    returnType.layoutQualifier = layoutQualifier;
 
-    TIntermAggregate* aggrNode = node->getAsAggregate();
-    
-    TFieldList::const_iterator memberFields;
-    if (op == EOpConstructStruct)
-        memberFields = type->getStruct()->fields().begin();
-    
-    TType elementType = *type;
-    if (type->isArray())
-        elementType.clearArrayness();
-
-    bool singleArg;
-    if (aggrNode) {
-        if (aggrNode->getOp() != EOpNull || aggrNode->getSequence().size() == 1)
-            singleArg = true;
-        else
-            singleArg = false;
-    } else
-        singleArg = true;
-
-    TIntermTyped *newNode;
-    if (singleArg) {
-        // If structure constructor or array constructor is being called 
-        // for only one parameter inside the structure, we need to call constructStruct function once.
-        if (type->isArray())
-            newNode = constructStruct(node, &elementType, 1, node->getLine(), false);
-        else if (op == EOpConstructStruct)
-            newNode = constructStruct(node, (*memberFields)->type(), 1, node->getLine(), false);
-        else
-            newNode = constructBuiltIn(type, op, node, node->getLine(), false);
+    if (typeSpecifier.array)
+    {
+        error(typeSpecifier.line, "not supported", "first-class array");
+        recover();
+        returnType.setArray(false);
+    }
 
-        if (newNode && newNode->getAsAggregate()) {
-            TIntermTyped* constConstructor = foldConstConstructor(newNode->getAsAggregate(), *type);
-            if (constConstructor)
-                return constConstructor;
+    if (shaderVersion < 300)
+    {
+        if (qualifier == EvqAttribute && (typeSpecifier.type == EbtBool || typeSpecifier.type == EbtInt))
+        {
+            error(typeSpecifier.line, "cannot be bool or int", getQualifierString(qualifier));
+            recover();
         }
 
-        return newNode;
-    }
-    
-    //
-    // Handle list of arguments.
-    //
-    TIntermSequence &sequenceVector = aggrNode->getSequence() ;    // Stores the information about the parameter to the constructor
-    // if the structure constructor contains more than one parameter, then construct
-    // each parameter
-    
-    int paramCount = 0;  // keeps a track of the constructor parameter number being checked    
-    
-    // for each parameter to the constructor call, check to see if the right type is passed or convert them 
-    // to the right type if possible (and allowed).
-    // for structure constructors, just check if the right type is passed, no conversion is allowed.
-    
-    for (TIntermSequence::iterator p = sequenceVector.begin(); 
-                                   p != sequenceVector.end(); p++, paramCount++) {
-        if (type->isArray())
-            newNode = constructStruct(*p, &elementType, paramCount+1, node->getLine(), true);
-        else if (op == EOpConstructStruct)
-            newNode = constructStruct(*p, memberFields[paramCount]->type(), paramCount+1, node->getLine(), true);
-        else
-            newNode = constructBuiltIn(type, op, *p, node->getLine(), true);
-        
-        if (newNode) {
-            *p = newNode;
+        if ((qualifier == EvqVaryingIn || qualifier == EvqVaryingOut) &&
+            (typeSpecifier.type == EbtBool || typeSpecifier.type == EbtInt))
+        {
+            error(typeSpecifier.line, "cannot be bool or int", getQualifierString(qualifier));
+            recover();
         }
     }
+    else
+    {
+        switch (qualifier)
+        {
+          case EvqSmoothIn:
+          case EvqSmoothOut:
+          case EvqVertexOut:
+          case EvqFragmentIn:
+          case EvqCentroidOut:
+          case EvqCentroidIn:
+            if (typeSpecifier.type == EbtBool)
+            {
+                error(typeSpecifier.line, "cannot be bool", getQualifierString(qualifier));
+                recover();
+            }
+            if (typeSpecifier.type == EbtInt || typeSpecifier.type == EbtUInt)
+            {
+                error(typeSpecifier.line, "must use 'flat' interpolation here", getQualifierString(qualifier));
+                recover();
+            }
+            break;
 
-    TIntermTyped* constructor = intermediate.setAggregateOperator(aggrNode, op, line);
-    TIntermTyped* constConstructor = foldConstConstructor(constructor->getAsAggregate(), *type);
-    if (constConstructor)
-        return constConstructor;
+          case EvqVertexIn:
+          case EvqFragmentOut:
+          case EvqFlatIn:
+          case EvqFlatOut:
+            if (typeSpecifier.type == EbtBool)
+            {
+                error(typeSpecifier.line, "cannot be bool", getQualifierString(qualifier));
+                recover();
+            }
+            break;
 
-    return constructor;
+          default: break;
+        }
+    }
+
+    return returnType;
 }
 
-TIntermTyped* TParseContext::foldConstConstructor(TIntermAggregate* aggrNode, const TType& type)
+TIntermAggregate* TParseContext::parseSingleDeclaration(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier)
 {
-    bool canBeFolded = areAllChildConst(aggrNode);
-    aggrNode->setType(type);
-    if (canBeFolded) {
-        bool returnVal = false;
-        ConstantUnion* unionArray = new ConstantUnion[type.getObjectSize()];
-        if (aggrNode->getSequence().size() == 1)  {
-            returnVal = intermediate.parseConstTree(aggrNode->getLine(), aggrNode, unionArray, aggrNode->getOp(), symbolTable,  type, true);
-        }
-        else {
-            returnVal = intermediate.parseConstTree(aggrNode->getLine(), aggrNode, unionArray, aggrNode->getOp(), symbolTable,  type);
+    TIntermSymbol* symbol = intermediate.addSymbol(0, identifier, TType(publicType), identifierLocation);
+    TIntermAggregate* aggregate = intermediate.makeAggregate(symbol, identifierLocation);
+
+    if (identifier != "")
+    {
+        if (singleDeclarationErrorCheck(publicType, identifierLocation, identifier))
+            recover();
+
+        // this error check can mutate the type
+        if (nonInitConstErrorCheck(identifierLocation, identifier, publicType, false))
+            recover();
+
+        TVariable* variable = 0;
+
+        if (nonInitErrorCheck(identifierLocation, identifier, publicType, variable))
+            recover();
+
+        if (variable && symbol)
+        {
+            symbol->setId(variable->getUniqueId());
         }
-        if (returnVal)
-            return 0;
+    }
 
-        return intermediate.addConstantUnion(unionArray, type, aggrNode->getLine());
+    return aggregate;
+}
+
+TIntermAggregate* TParseContext::parseSingleArrayDeclaration(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& indexLocation, TIntermTyped *indexExpression)
+{
+    if (singleDeclarationErrorCheck(publicType, identifierLocation, identifier))
+        recover();
+
+    // this error check can mutate the type
+    if (nonInitConstErrorCheck(identifierLocation, identifier, publicType, true))
+        recover();
+
+    if (arrayTypeErrorCheck(indexLocation, publicType) || arrayQualifierErrorCheck(indexLocation, publicType))
+    {
+        recover();
     }
 
-    return 0;
+    TPublicType arrayType = publicType;
+
+    int size;
+    if (arraySizeErrorCheck(identifierLocation, indexExpression, size))
+    {
+        recover();
+    }
+    else
+    {
+        arrayType.setArray(true, size);
+    }
+
+    TIntermSymbol* symbol = intermediate.addSymbol(0, identifier, TType(arrayType), identifierLocation);
+    TIntermAggregate* aggregate = intermediate.makeAggregate(symbol, identifierLocation);
+    TVariable* variable = 0;
+
+    if (arrayErrorCheck(identifierLocation, identifier, arrayType, variable))
+        recover();
+
+    if (variable && symbol)
+    {
+        symbol->setId(variable->getUniqueId());
+    }
+
+    return aggregate;
 }
 
-// Function for constructor implementation. Calls addUnaryMath with appropriate EOp value
-// for the parameter to the constructor (passed to this function). Essentially, it converts
-// the parameter types correctly. If a constructor expects an int (like ivec2) and is passed a 
-// float, then float is converted to int.
-//
-// Returns 0 for an error or the constructed node.
-//
-TIntermTyped* TParseContext::constructBuiltIn(const TType* type, TOperator op, TIntermNode* node, const TSourceLoc& line, bool subset)
+TIntermAggregate* TParseContext::parseSingleInitDeclaration(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& initLocation, TIntermTyped *initializer)
 {
-    TIntermTyped* newNode;
-    TOperator basicOp;
+    if (singleDeclarationErrorCheck(publicType, identifierLocation, identifier))
+        recover();
 
-    //
-    // First, convert types as needed.
-    //
-    switch (op) {
-    case EOpConstructVec2:
-    case EOpConstructVec3:
-    case EOpConstructVec4:
-    case EOpConstructMat2:
-    case EOpConstructMat3:
-    case EOpConstructMat4:
-    case EOpConstructFloat:
-        basicOp = EOpConstructFloat;
-        break;
+    TIntermNode* intermNode;
+    if (!executeInitializer(identifierLocation, identifier, publicType, initializer, intermNode))
+    {
+        //
+        // Build intermediate representation
+        //
+        return intermNode ? intermediate.makeAggregate(intermNode, initLocation) : NULL;
+    }
+    else
+    {
+        recover();
+        return NULL;
+    }
+}
 
-    case EOpConstructIVec2:
-    case EOpConstructIVec3:
-    case EOpConstructIVec4:
-    case EOpConstructInt:
-        basicOp = EOpConstructInt;
-        break;
+TIntermAggregate* TParseContext::parseInvariantDeclaration(const TSourceLoc &invariantLoc,
+                                                           const TSourceLoc &identifierLoc,
+                                                           const TString *identifier,
+                                                           const TSymbol *symbol)
+{
+    // invariant declaration
+    if (globalErrorCheck(invariantLoc, symbolTable.atGlobalLevel(), "invariant varying"))
+    {
+        recover();
+    }
 
-    case EOpConstructBVec2:
-    case EOpConstructBVec3:
-    case EOpConstructBVec4:
-    case EOpConstructBool:
-        basicOp = EOpConstructBool;
-        break;
+    if (!symbol)
+    {
+        error(identifierLoc, "undeclared identifier declared as invariant", identifier->c_str());
+        recover();
 
-    default:
-        error(line, "unsupported construction", "");
+        return NULL;
+    }
+    else
+    {
+        const TVariable *variable = getNamedVariable(identifierLoc, identifier, symbol);
+        ASSERT(variable);
+        const TType &type = variable->getType();
+        TIntermSymbol *intermSymbol = intermediate.addSymbol(variable->getUniqueId(),
+                                                             *identifier, type, identifierLoc);
+
+        TIntermAggregate *aggregate = intermediate.makeAggregate(intermSymbol, identifierLoc);
+        aggregate->setOp(EOpInvariantDeclaration);
+        return aggregate;
+    }
+}
+
+TIntermAggregate* TParseContext::parseDeclarator(TPublicType &publicType, TIntermAggregate *aggregateDeclaration, TSymbol *identifierSymbol, const TSourceLoc& identifierLocation, const TString &identifier)
+{
+    TIntermSymbol* symbol = intermediate.addSymbol(0, identifier, TType(publicType), identifierLocation);
+    TIntermAggregate* intermAggregate = intermediate.growAggregate(aggregateDeclaration, symbol, identifierLocation);
+
+    if (structQualifierErrorCheck(identifierLocation, publicType))
         recover();
 
-        return 0;
+    if (locationDeclaratorListCheck(identifierLocation, publicType))
+        recover();
+
+    if (nonInitConstErrorCheck(identifierLocation, identifier, publicType, false))
+        recover();
+
+    TVariable* variable = 0;
+    if (nonInitErrorCheck(identifierLocation, identifier, publicType, variable))
+        recover();
+    if (symbol && variable)
+        symbol->setId(variable->getUniqueId());
+
+    return intermAggregate;
+}
+
+TIntermAggregate* TParseContext::parseArrayDeclarator(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& arrayLocation, TIntermNode *declaratorList, TIntermTyped *indexExpression)
+{
+    if (structQualifierErrorCheck(identifierLocation, publicType))
+        recover();
+
+    if (locationDeclaratorListCheck(identifierLocation, publicType))
+        recover();
+
+    if (nonInitConstErrorCheck(identifierLocation, identifier, publicType, true))
+        recover();
+
+    if (arrayTypeErrorCheck(arrayLocation, publicType) || arrayQualifierErrorCheck(arrayLocation, publicType))
+    {
+        recover();
     }
-    newNode = intermediate.addUnaryMath(basicOp, node, node->getLine(), symbolTable);
-    if (newNode == 0) {
-        error(line, "can't convert", "constructor");
-        return 0;
+    else if (indexExpression)
+    {
+        int size;
+        if (arraySizeErrorCheck(arrayLocation, indexExpression, size))
+            recover();
+        TPublicType arrayType(publicType);
+        arrayType.setArray(true, size);
+        TVariable* variable = NULL;
+        if (arrayErrorCheck(arrayLocation, identifier, arrayType, variable))
+            recover();
+        TType type = TType(arrayType);
+        type.setArraySize(size);
+
+        return intermediate.growAggregate(declaratorList, intermediate.addSymbol(variable ? variable->getUniqueId() : 0, identifier, type, identifierLocation), identifierLocation);
+    }
+    else
+    {
+        TPublicType arrayType(publicType);
+        arrayType.setArray(true);
+        TVariable* variable = NULL;
+        if (arrayErrorCheck(arrayLocation, identifier, arrayType, variable))
+            recover();
     }
 
-    //
-    // Now, if there still isn't an operation to do the construction, and we need one, add one.
-    //
-    
-    // Otherwise, skip out early.
-    if (subset || (newNode != node && newNode->getType() == *type))
-        return newNode;
+    return NULL;
+}
+
+TIntermAggregate* TParseContext::parseInitDeclarator(TPublicType &publicType, TIntermAggregate *declaratorList, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& initLocation, TIntermTyped *initializer)
+{
+    if (structQualifierErrorCheck(identifierLocation, publicType))
+        recover();
+
+    if (locationDeclaratorListCheck(identifierLocation, publicType))
+        recover();
 
-    // setAggregateOperator will insert a new node for the constructor, as needed.
-    return intermediate.setAggregateOperator(newNode, op, line);
+    TIntermNode* intermNode;
+    if (!executeInitializer(identifierLocation, identifier, publicType, initializer, intermNode))
+    {
+        //
+        // build the intermediate representation
+        //
+        if (intermNode)
+        {
+            return intermediate.growAggregate(declaratorList, intermNode, initLocation);
+        }
+        else
+        {
+            return declaratorList;
+        }
+    }
+    else
+    {
+        recover();
+        return NULL;
+    }
 }
 
-// This function tests for the type of the parameters to the structures constructors. Raises
-// an error message if the expected type does not match the parameter passed to the constructor.
+void TParseContext::parseGlobalLayoutQualifier(const TPublicType &typeQualifier)
+{
+    if (typeQualifier.qualifier != EvqUniform)
+    {
+        error(typeQualifier.line, "invalid qualifier:", getQualifierString(typeQualifier.qualifier), "global layout must be uniform");
+        recover();
+        return;
+    }
+
+    const TLayoutQualifier layoutQualifier = typeQualifier.layoutQualifier;
+    ASSERT(!layoutQualifier.isEmpty());
+
+    if (shaderVersion < 300)
+    {
+        error(typeQualifier.line, "layout qualifiers supported in GLSL ES 3.00 only", "layout");
+        recover();
+        return;
+    }
+
+    if (layoutLocationErrorCheck(typeQualifier.line, typeQualifier.layoutQualifier))
+    {
+        recover();
+        return;
+    }
+
+    if (layoutQualifier.matrixPacking != EmpUnspecified)
+    {
+        defaultMatrixPacking = layoutQualifier.matrixPacking;
+    }
+
+    if (layoutQualifier.blockStorage != EbsUnspecified)
+    {
+        defaultBlockStorage = layoutQualifier.blockStorage;
+    }
+}
+
+TFunction *TParseContext::addConstructorFunc(TPublicType publicType)
+{
+    TOperator op = EOpNull;
+    if (publicType.userDef)
+    {
+        op = EOpConstructStruct;
+    }
+    else
+    {
+        switch (publicType.type)
+        {
+          case EbtFloat:
+            if (publicType.isMatrix())
+            {
+                // TODO: non-square matrices
+                switch(publicType.getCols())
+                {
+                  case 2: op = EOpConstructMat2;  break;
+                  case 3: op = EOpConstructMat3;  break;
+                  case 4: op = EOpConstructMat4;  break;
+                }
+            }
+            else
+            {
+                switch(publicType.getNominalSize())
+                {
+                  case 1: op = EOpConstructFloat; break;
+                  case 2: op = EOpConstructVec2;  break;
+                  case 3: op = EOpConstructVec3;  break;
+                  case 4: op = EOpConstructVec4;  break;
+                }
+            }
+            break;
+
+          case EbtInt:
+            switch(publicType.getNominalSize())
+            {
+              case 1: op = EOpConstructInt;   break;
+              case 2: op = EOpConstructIVec2; break;
+              case 3: op = EOpConstructIVec3; break;
+              case 4: op = EOpConstructIVec4; break;
+            }
+            break;
+
+          case EbtUInt:
+            switch(publicType.getNominalSize())
+            {
+              case 1: op = EOpConstructUInt;  break;
+              case 2: op = EOpConstructUVec2; break;
+              case 3: op = EOpConstructUVec3; break;
+              case 4: op = EOpConstructUVec4; break;
+            }
+            break;
+
+          case EbtBool:
+            switch(publicType.getNominalSize())
+            {
+                case 1: op = EOpConstructBool;  break;
+                case 2: op = EOpConstructBVec2; break;
+                case 3: op = EOpConstructBVec3; break;
+                case 4: op = EOpConstructBVec4; break;
+            }
+            break;
+
+          default: break;
+        }
+
+        if (op == EOpNull)
+        {
+            error(publicType.line, "cannot construct this type", getBasicString(publicType.type));
+            recover();
+            publicType.type = EbtFloat;
+            op = EOpConstructFloat;
+        }
+    }
+
+    TString tempString;
+    TType type(publicType);
+    return new TFunction(&tempString, type, op);
+}
+
+// This function is used to test for the correctness of the parameters passed to various constructor functions
+// and also convert them to the right datatype if it is allowed and required. 
 //
-// Returns 0 for an error or the input node itself if the expected and the given parameter types match.
+// Returns 0 for an error or the constructed node (aggregate or typed) for no error.
 //
-TIntermTyped* TParseContext::constructStruct(TIntermNode* node, TType* type, int paramCount, const TSourceLoc& line, bool subset)
+TIntermTyped *TParseContext::addConstructor(TIntermNode *arguments, const TType *type, TOperator op, TFunction *fnCall, const TSourceLoc &line)
 {
-    if (*type == node->getAsTyped()->getType()) {
-        if (subset)
-            return node->getAsTyped();
-        else
-            return intermediate.setAggregateOperator(node->getAsTyped(), EOpConstructStruct, line);
-    } else {
-        std::stringstream extraInfoStream;
-        extraInfoStream << "cannot convert parameter " << paramCount 
-                        << " from '" << node->getAsTyped()->getType().getBasicString()
-                        << "' to '" << type->getBasicString() << "'";
-        std::string extraInfo = extraInfoStream.str();
-        error(line, "", "constructor", extraInfo.c_str());
-        recover();
+    TIntermAggregate *aggregateArguments = arguments->getAsAggregate();
+
+    if (!aggregateArguments)
+    {
+        aggregateArguments = new TIntermAggregate;
+        aggregateArguments->getSequence()->push_back(arguments);
+    }
+
+    if (op == EOpConstructStruct)
+    {
+        const TFieldList &fields = type->getStruct()->fields();
+        TIntermSequence *args = aggregateArguments->getSequence();
+
+        for (size_t i = 0; i < fields.size(); i++)
+        {
+            if (i >= args->size() || (*args)[i]->getAsTyped()->getType() != *fields[i]->type())
+            {
+                error(line, "Structure constructor arguments do not match structure fields", "Error");
+                recover();
+
+                return 0;
+            }
+        }
+    }
+
+    // Turn the argument list itself into a constructor
+    TIntermTyped *constructor = intermediate.setAggregateOperator(aggregateArguments, op, line);
+    TIntermTyped *constConstructor = foldConstConstructor(constructor->getAsAggregate(), *type);
+    if (constConstructor)
+    {
+        return constConstructor;
+    }
+
+    return constructor;
+}
+
+TIntermTyped* TParseContext::foldConstConstructor(TIntermAggregate* aggrNode, const TType& type)
+{
+    bool canBeFolded = areAllChildConst(aggrNode);
+    aggrNode->setType(type);
+    if (canBeFolded) {
+        bool returnVal = false;
+        ConstantUnion* unionArray = new ConstantUnion[type.getObjectSize()];
+        if (aggrNode->getSequence()->size() == 1)  {
+            returnVal = intermediate.parseConstTree(aggrNode->getLine(), aggrNode, unionArray, aggrNode->getOp(), type, true);
+        }
+        else {
+            returnVal = intermediate.parseConstTree(aggrNode->getLine(), aggrNode, unionArray, aggrNode->getOp(), type);
+        }
+        if (returnVal)
+            return 0;
+
+        return intermediate.addConstantUnion(unionArray, type, aggrNode->getLine());
     }
 
     return 0;
@@ -1295,7 +1714,7 @@ TIntermTyped* TParseContext::addConstMatrixNode(int index, TIntermTyped* node, c
     TIntermTyped* typedNode;
     TIntermConstantUnion* tempConstantNode = node->getAsConstantUnion();
 
-    if (index >= node->getType().getNominalSize()) {
+    if (index >= node->getType().getCols()) {
         std::stringstream extraInfoStream;
         extraInfoStream << "matrix field selection out of range '" << index << "'";
         std::string extraInfo = extraInfoStream.str();
@@ -1306,7 +1725,7 @@ TIntermTyped* TParseContext::addConstMatrixNode(int index, TIntermTyped* node, c
 
     if (tempConstantNode) {
          ConstantUnion* unionArray = tempConstantNode->getUnionArrayPointer();
-         int size = tempConstantNode->getType().getNominalSize();
+         int size = tempConstantNode->getType().getCols();
          typedNode = intermediate.addConstantUnion(&unionArray[size*index], tempConstantNode->getType(), line);
     } else {
         error(line, "Cannot offset into the matrix", "Error");
@@ -1342,9 +1761,9 @@ TIntermTyped* TParseContext::addConstArrayNode(int index, TIntermTyped* node, co
     }
 
     if (tempConstantNode) {
-         size_t arrayElementSize = arrayElementType.getObjectSize();
-         ConstantUnion* unionArray = tempConstantNode->getUnionArrayPointer();
-         typedNode = intermediate.addConstantUnion(&unionArray[arrayElementSize * index], tempConstantNode->getType(), line);
+        size_t arrayElementSize = arrayElementType.getObjectSize();
+        ConstantUnion* unionArray = tempConstantNode->getUnionArrayPointer();
+        typedNode = intermediate.addConstantUnion(&unionArray[arrayElementSize * index], tempConstantNode->getType(), line);
     } else {
         error(line, "Cannot offset into the array", "Error");
         recover();
@@ -1361,11 +1780,11 @@ TIntermTyped* TParseContext::addConstArrayNode(int index, TIntermTyped* node, co
 // If there is an embedded/nested struct, it appropriately calls addConstStructNested or addConstStructFromAggr
 // function and returns the parse-tree with the values of the embedded/nested struct.
 //
-TIntermTyped* TParseContext::addConstStruct(TString& identifier, TIntermTyped* node, const TSourceLoc& line)
+TIntermTyped* TParseContext::addConstStruct(const TString &identifier, TIntermTyped *node, const TSourceLoc& line)
 {
     const TFieldList& fields = node->getType().getStruct()->fields();
-
     size_t instanceSize = 0;
+
     for (size_t index = 0; index < fields.size(); ++index) {
         if (fields[index]->name() == identifier) {
             break;
@@ -1374,8 +1793,8 @@ TIntermTyped* TParseContext::addConstStruct(TString& identifier, TIntermTyped* n
         }
     }
 
-    TIntermTyped* typedNode = 0;
-    TIntermConstantUnion* tempConstantNode = node->getAsConstantUnion();
+    TIntermTyped *typedNode;
+    TIntermConstantUnion *tempConstantNode = node->getAsConstantUnion();
     if (tempConstantNode) {
          ConstantUnion* constArray = tempConstantNode->getUnionArrayPointer();
 
@@ -1390,6 +1809,146 @@ TIntermTyped* TParseContext::addConstStruct(TString& identifier, TIntermTyped* n
     return typedNode;
 }
 
+//
+// Interface/uniform blocks
+//
+TIntermAggregate* TParseContext::addInterfaceBlock(const TPublicType& typeQualifier, const TSourceLoc& nameLine, const TString& blockName, TFieldList* fieldList, 
+                                                   const TString* instanceName, const TSourceLoc& instanceLine, TIntermTyped* arrayIndex, const TSourceLoc& arrayIndexLine)
+{
+    if (reservedErrorCheck(nameLine, blockName))
+        recover();
+
+    if (typeQualifier.qualifier != EvqUniform)
+    {
+        error(typeQualifier.line, "invalid qualifier:", getQualifierString(typeQualifier.qualifier), "interface blocks must be uniform");
+        recover();
+    }
+
+    TLayoutQualifier blockLayoutQualifier = typeQualifier.layoutQualifier;
+    if (layoutLocationErrorCheck(typeQualifier.line, blockLayoutQualifier))
+    {
+        recover();
+    }
+
+    if (blockLayoutQualifier.matrixPacking == EmpUnspecified)
+    {
+        blockLayoutQualifier.matrixPacking = defaultMatrixPacking;
+    }
+
+    if (blockLayoutQualifier.blockStorage == EbsUnspecified)
+    {
+        blockLayoutQualifier.blockStorage = defaultBlockStorage;
+    }
+
+    TSymbol* blockNameSymbol = new TInterfaceBlockName(&blockName);
+    if (!symbolTable.declare(blockNameSymbol)) {
+        error(nameLine, "redefinition", blockName.c_str(), "interface block name");
+        recover();
+    }
+
+    // check for sampler types and apply layout qualifiers
+    for (size_t memberIndex = 0; memberIndex < fieldList->size(); ++memberIndex) {
+        TField* field = (*fieldList)[memberIndex];
+        TType* fieldType = field->type();
+        if (IsSampler(fieldType->getBasicType())) {
+            error(field->line(), "unsupported type", fieldType->getBasicString(), "sampler types are not allowed in interface blocks");
+            recover();
+        }
+
+        const TQualifier qualifier = fieldType->getQualifier();
+        switch (qualifier)
+        {
+          case EvqGlobal:
+          case EvqUniform:
+            break;
+          default:
+            error(field->line(), "invalid qualifier on interface block member", getQualifierString(qualifier));
+            recover();
+            break;
+        }
+
+        // check layout qualifiers
+        TLayoutQualifier fieldLayoutQualifier = fieldType->getLayoutQualifier();
+        if (layoutLocationErrorCheck(field->line(), fieldLayoutQualifier))
+        {
+            recover();
+        }
+
+        if (fieldLayoutQualifier.blockStorage != EbsUnspecified)
+        {
+            error(field->line(), "invalid layout qualifier:", getBlockStorageString(fieldLayoutQualifier.blockStorage), "cannot be used here");
+            recover();
+        }
+
+        if (fieldLayoutQualifier.matrixPacking == EmpUnspecified)
+        {
+            fieldLayoutQualifier.matrixPacking = blockLayoutQualifier.matrixPacking;
+        }
+        else if (!fieldType->isMatrix())
+        {
+            error(field->line(), "invalid layout qualifier:", getMatrixPackingString(fieldLayoutQualifier.matrixPacking), "can only be used on matrix types");
+            recover();
+        }
+
+        fieldType->setLayoutQualifier(fieldLayoutQualifier);
+    }
+
+    // add array index
+    int arraySize = 0;
+    if (arrayIndex != NULL)
+    {
+        if (arraySizeErrorCheck(arrayIndexLine, arrayIndex, arraySize))
+            recover();
+    }
+
+    TInterfaceBlock* interfaceBlock = new TInterfaceBlock(&blockName, fieldList, instanceName, arraySize, blockLayoutQualifier);
+    TType interfaceBlockType(interfaceBlock, typeQualifier.qualifier, blockLayoutQualifier, arraySize);
+
+    TString symbolName = "";
+    int symbolId = 0;
+
+    if (!instanceName)
+    {
+        // define symbols for the members of the interface block
+        for (size_t memberIndex = 0; memberIndex < fieldList->size(); ++memberIndex)
+        {
+            TField* field = (*fieldList)[memberIndex];
+            TType* fieldType = field->type();
+
+            // set parent pointer of the field variable
+            fieldType->setInterfaceBlock(interfaceBlock);
+
+            TVariable* fieldVariable = new TVariable(&field->name(), *fieldType);
+            fieldVariable->setQualifier(typeQualifier.qualifier);
+
+            if (!symbolTable.declare(fieldVariable)) {
+                error(field->line(), "redefinition", field->name().c_str(), "interface block member name");
+                recover();
+            }
+        }
+    }
+    else
+    {
+        // add a symbol for this interface block
+        TVariable* instanceTypeDef = new TVariable(instanceName, interfaceBlockType, false);
+        instanceTypeDef->setQualifier(typeQualifier.qualifier);
+
+        if (!symbolTable.declare(instanceTypeDef)) {
+            error(instanceLine, "redefinition", instanceName->c_str(), "interface block instance name");
+            recover();
+        }
+
+        symbolId = instanceTypeDef->getUniqueId();
+        symbolName = instanceTypeDef->getName();
+    }
+
+    TIntermAggregate *aggregate = intermediate.makeAggregate(intermediate.addSymbol(symbolId, symbolName, interfaceBlockType, typeQualifier.line), nameLine);
+    aggregate->setOp(EOpDeclaration);
+
+    exitStructDeclaration();
+    return aggregate;
+}
+
 bool TParseContext::enterStructDeclaration(const TSourceLoc& line, const TString& identifier)
 {
     ++structNestingLevel;
@@ -1418,7 +1977,7 @@ const int kWebGLMaxStructNesting = 4;
 
 bool TParseContext::structNestingErrorCheck(const TSourceLoc& line, const TField& field)
 {
-    if (!isWebGLBasedSpec(shaderSpec)) {
+    if (!IsWebGLBasedSpec(shaderSpec)) {
         return false;
     }
 
@@ -1531,6 +2090,17 @@ TIntermTyped* TParseContext::addIndexExpression(TIntermTyped *baseExpression, co
     }
     else
     {
+        if (baseExpression->isInterfaceBlock())
+        {
+            error(location, "", "[", "array indexes for interface blocks arrays must be constant integral expressions");
+            recover();
+        }
+        else if (baseExpression->getQualifier() == EvqFragmentOut)
+        {
+            error(location, "", "[", "array indexes for fragment outputs must be constant integral expressions");
+            recover();
+        }
+
         indexedExpression = intermediate.addIndex(EOpIndexIndirect, baseExpression, indexExpression, location);
     }
 
@@ -1548,9 +2118,14 @@ TIntermTyped* TParseContext::addIndexExpression(TIntermTyped *baseExpression, co
             TType copyOfType(baseType.getStruct());
             indexedExpression->setType(copyOfType);
         }
+        else if (baseType.isInterfaceBlock())
+        {
+            TType copyOfType(baseType.getInterfaceBlock(), baseType.getQualifier(), baseType.getLayoutQualifier(), 0);
+            indexedExpression->setType(copyOfType);
+        }
         else
         {
-            indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(), EvqTemporary, baseExpression->getNominalSize(), baseExpression->isMatrix()));
+            indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(), EvqTemporary, baseExpression->getNominalSize(), baseExpression->getSecondarySize()));
         }
 
         if (baseExpression->getType().getQualifier() == EvqConst)
@@ -1561,7 +2136,7 @@ TIntermTyped* TParseContext::addIndexExpression(TIntermTyped *baseExpression, co
     else if (baseExpression->isMatrix())
     {
         TQualifier qualifier = baseExpression->getType().getQualifier() == EvqConst ? EvqConst : EvqTemporary;
-        indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(), qualifier, baseExpression->getNominalSize()));
+        indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(), qualifier, baseExpression->getRows()));
     }
     else if (baseExpression->isVector())
     {
@@ -1576,6 +2151,408 @@ TIntermTyped* TParseContext::addIndexExpression(TIntermTyped *baseExpression, co
     return indexedExpression;
 }
 
+TIntermTyped* TParseContext::addFieldSelectionExpression(TIntermTyped *baseExpression, const TSourceLoc& dotLocation, const TString &fieldString, const TSourceLoc& fieldLocation)
+{
+    TIntermTyped *indexedExpression = NULL;
+
+    if (baseExpression->isArray())
+    {
+        error(fieldLocation, "cannot apply dot operator to an array", ".");
+        recover();
+    }
+
+    if (baseExpression->isVector())
+    {
+        TVectorFields fields;
+        if (!parseVectorFields(fieldString, baseExpression->getNominalSize(), fields, fieldLocation))
+        {
+            fields.num = 1;
+            fields.offsets[0] = 0;
+            recover();
+        }
+
+        if (baseExpression->getType().getQualifier() == EvqConst)
+        {
+            // constant folding for vector fields
+            indexedExpression = addConstVectorNode(fields, baseExpression, fieldLocation);
+            if (indexedExpression == 0)
+            {
+                recover();
+                indexedExpression = baseExpression;
+            }
+            else
+            {
+                indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(), EvqConst, (int) (fieldString).size()));
+            }
+        }
+        else
+        {
+            TString vectorString = fieldString;
+            TIntermTyped* index = intermediate.addSwizzle(fields, fieldLocation);
+            indexedExpression = intermediate.addIndex(EOpVectorSwizzle, baseExpression, index, dotLocation);
+            indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(), EvqTemporary, (int) vectorString.size()));
+        }
+    }
+    else if (baseExpression->isMatrix())
+    {
+        TMatrixFields fields;
+        if (!parseMatrixFields(fieldString, baseExpression->getCols(), baseExpression->getRows(), fields, fieldLocation))
+        {
+            fields.wholeRow = false;
+            fields.wholeCol = false;
+            fields.row = 0;
+            fields.col = 0;
+            recover();
+        }
+
+        if (fields.wholeRow || fields.wholeCol)
+        {
+            error(dotLocation, " non-scalar fields not implemented yet", ".");
+            recover();
+            ConstantUnion *unionArray = new ConstantUnion[1];
+            unionArray->setIConst(0);
+            TIntermTyped* index = intermediate.addConstantUnion(unionArray, TType(EbtInt, EbpUndefined, EvqConst), fieldLocation);
+            indexedExpression = intermediate.addIndex(EOpIndexDirect, baseExpression, index, dotLocation);
+            indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision(),EvqTemporary, baseExpression->getCols(), baseExpression->getRows()));
+        }
+        else
+        {
+            ConstantUnion *unionArray = new ConstantUnion[1];
+            unionArray->setIConst(fields.col * baseExpression->getRows() + fields.row);
+            TIntermTyped* index = intermediate.addConstantUnion(unionArray, TType(EbtInt, EbpUndefined, EvqConst), fieldLocation);
+            indexedExpression = intermediate.addIndex(EOpIndexDirect, baseExpression, index, dotLocation);
+            indexedExpression->setType(TType(baseExpression->getBasicType(), baseExpression->getPrecision()));
+        }
+    }
+    else if (baseExpression->getBasicType() == EbtStruct)
+    {
+        bool fieldFound = false;
+        const TFieldList& fields = baseExpression->getType().getStruct()->fields();
+        if (fields.empty())
+        {
+            error(dotLocation, "structure has no fields", "Internal Error");
+            recover();
+            indexedExpression = baseExpression;
+        }
+        else
+        {
+            unsigned int i;
+            for (i = 0; i < fields.size(); ++i)
+            {
+                if (fields[i]->name() == fieldString)
+                {
+                    fieldFound = true;
+                    break;
+                }
+            }
+            if (fieldFound)
+            {
+                if (baseExpression->getType().getQualifier() == EvqConst)
+                {
+                    indexedExpression = addConstStruct(fieldString, baseExpression, dotLocation);
+                    if (indexedExpression == 0)
+                    {
+                        recover();
+                        indexedExpression = baseExpression;
+                    }
+                    else
+                    {
+                        indexedExpression->setType(*fields[i]->type());
+                        // change the qualifier of the return type, not of the structure field
+                        // as the structure definition is shared between various structures.
+                        indexedExpression->getTypePointer()->setQualifier(EvqConst);
+                    }
+                }
+                else
+                {
+                    ConstantUnion *unionArray = new ConstantUnion[1];
+                    unionArray->setIConst(i);
+                    TIntermTyped* index = intermediate.addConstantUnion(unionArray, *fields[i]->type(), fieldLocation);
+                    indexedExpression = intermediate.addIndex(EOpIndexDirectStruct, baseExpression, index, dotLocation);
+                    indexedExpression->setType(*fields[i]->type());
+                }
+            }
+            else
+            {
+                error(dotLocation, " no such field in structure", fieldString.c_str());
+                recover();
+                indexedExpression = baseExpression;
+            }
+        }
+    }
+    else if (baseExpression->isInterfaceBlock())
+    {
+        bool fieldFound = false;
+        const TFieldList& fields = baseExpression->getType().getInterfaceBlock()->fields();
+        if (fields.empty())
+        {
+            error(dotLocation, "interface block has no fields", "Internal Error");
+            recover();
+            indexedExpression = baseExpression;
+        }
+        else
+        {
+            unsigned int i;
+            for (i = 0; i < fields.size(); ++i)
+            {
+                if (fields[i]->name() == fieldString)
+                {
+                    fieldFound = true;
+                    break;
+                }
+            }
+            if (fieldFound)
+            {
+                ConstantUnion *unionArray = new ConstantUnion[1];
+                unionArray->setIConst(i);
+                TIntermTyped* index = intermediate.addConstantUnion(unionArray, *fields[i]->type(), fieldLocation);
+                indexedExpression = intermediate.addIndex(EOpIndexDirectInterfaceBlock, baseExpression, index, dotLocation);
+                indexedExpression->setType(*fields[i]->type());
+            }
+            else
+            {
+                error(dotLocation, " no such field in interface block", fieldString.c_str());
+                recover();
+                indexedExpression = baseExpression;
+            }
+        }
+    }
+    else
+    {
+        if (shaderVersion < 300)
+        {
+            error(dotLocation, " field selection requires structure, vector, or matrix on left hand side", fieldString.c_str());
+        }
+        else
+        {
+            error(dotLocation, " field selection requires structure, vector, matrix, or interface block on left hand side", fieldString.c_str());
+        }
+        recover();
+        indexedExpression = baseExpression;
+    }
+
+    return indexedExpression;
+}
+
+TLayoutQualifier TParseContext::parseLayoutQualifier(const TString &qualifierType, const TSourceLoc& qualifierTypeLine)
+{
+    TLayoutQualifier qualifier;
+
+    qualifier.location = -1;
+    qualifier.matrixPacking = EmpUnspecified;
+    qualifier.blockStorage = EbsUnspecified;
+
+    if (qualifierType == "shared")
+    {
+        qualifier.blockStorage = EbsShared;
+    }
+    else if (qualifierType == "packed")
+    {
+        qualifier.blockStorage = EbsPacked;
+    }
+    else if (qualifierType == "std140")
+    {
+        qualifier.blockStorage = EbsStd140;
+    }
+    else if (qualifierType == "row_major")
+    {
+        qualifier.matrixPacking = EmpRowMajor;
+    }
+    else if (qualifierType == "column_major")
+    {
+        qualifier.matrixPacking = EmpColumnMajor;
+    }
+    else if (qualifierType == "location")
+    {
+        error(qualifierTypeLine, "invalid layout qualifier", qualifierType.c_str(), "location requires an argument");
+        recover();
+    }
+    else
+    {
+        error(qualifierTypeLine, "invalid layout qualifier", qualifierType.c_str());
+        recover();
+    }
+
+    return qualifier;
+}
+
+TLayoutQualifier TParseContext::parseLayoutQualifier(const TString &qualifierType, const TSourceLoc& qualifierTypeLine, const TString &intValueString, int intValue, const TSourceLoc& intValueLine)
+{
+    TLayoutQualifier qualifier;
+
+    qualifier.location = -1;
+    qualifier.matrixPacking = EmpUnspecified;
+    qualifier.blockStorage = EbsUnspecified;
+
+    if (qualifierType != "location")
+    {
+        error(qualifierTypeLine, "invalid layout qualifier", qualifierType.c_str(), "only location may have arguments");
+        recover();
+    }
+    else
+    {
+        // must check that location is non-negative
+        if (intValue < 0)
+        {
+            error(intValueLine, "out of range:", intValueString.c_str(), "location must be non-negative");
+            recover();
+        }
+        else
+        {
+            qualifier.location = intValue;
+        }
+    }
+
+    return qualifier;
+}
+
+TLayoutQualifier TParseContext::joinLayoutQualifiers(TLayoutQualifier leftQualifier, TLayoutQualifier rightQualifier)
+{
+    TLayoutQualifier joinedQualifier = leftQualifier;
+
+    if (rightQualifier.location != -1)
+    {
+        joinedQualifier.location = rightQualifier.location;
+    }
+    if (rightQualifier.matrixPacking != EmpUnspecified)
+    {
+        joinedQualifier.matrixPacking = rightQualifier.matrixPacking;
+    }
+    if (rightQualifier.blockStorage != EbsUnspecified)
+    {
+        joinedQualifier.blockStorage = rightQualifier.blockStorage;
+    }
+
+    return joinedQualifier;
+}
+
+TPublicType TParseContext::joinInterpolationQualifiers(const TSourceLoc &interpolationLoc, TQualifier interpolationQualifier,
+                                                       const TSourceLoc &storageLoc, TQualifier storageQualifier)
+{
+    TQualifier mergedQualifier = EvqSmoothIn;
+
+    if (storageQualifier == EvqFragmentIn) {
+        if (interpolationQualifier == EvqSmooth)
+            mergedQualifier = EvqSmoothIn;
+        else if (interpolationQualifier == EvqFlat)
+            mergedQualifier = EvqFlatIn;
+        else UNREACHABLE();
+    }
+    else if (storageQualifier == EvqCentroidIn) {
+        if (interpolationQualifier == EvqSmooth)
+            mergedQualifier = EvqCentroidIn;
+        else if (interpolationQualifier == EvqFlat)
+            mergedQualifier = EvqFlatIn;
+        else UNREACHABLE();
+    }
+    else if (storageQualifier == EvqVertexOut) {
+        if (interpolationQualifier == EvqSmooth)
+            mergedQualifier = EvqSmoothOut;
+        else if (interpolationQualifier == EvqFlat)
+            mergedQualifier = EvqFlatOut;
+        else UNREACHABLE();
+    }
+    else if (storageQualifier == EvqCentroidOut) {
+        if (interpolationQualifier == EvqSmooth)
+            mergedQualifier = EvqCentroidOut;
+        else if (interpolationQualifier == EvqFlat)
+            mergedQualifier = EvqFlatOut;
+        else UNREACHABLE();
+    }
+    else {
+        error(interpolationLoc, "interpolation qualifier requires a fragment 'in' or vertex 'out' storage qualifier", getInterpolationString(interpolationQualifier));
+        recover();
+
+        mergedQualifier = storageQualifier;
+    }
+
+    TPublicType type;
+    type.setBasic(EbtVoid, mergedQualifier, storageLoc);
+    return type;
+}
+
+TFieldList *TParseContext::addStructDeclaratorList(const TPublicType& typeSpecifier, TFieldList *fieldList)
+{
+    if (voidErrorCheck(typeSpecifier.line, (*fieldList)[0]->name(), typeSpecifier)) {
+        recover();
+    }
+
+    for (unsigned int i = 0; i < fieldList->size(); ++i) {
+        //
+        // Careful not to replace already known aspects of type, like array-ness
+        //
+        TType* type = (*fieldList)[i]->type();
+        type->setBasicType(typeSpecifier.type);
+        type->setPrimarySize(typeSpecifier.primarySize);
+        type->setSecondarySize(typeSpecifier.secondarySize);
+        type->setPrecision(typeSpecifier.precision);
+        type->setQualifier(typeSpecifier.qualifier);
+        type->setLayoutQualifier(typeSpecifier.layoutQualifier);
+
+        // don't allow arrays of arrays
+        if (type->isArray()) {
+            if (arrayTypeErrorCheck(typeSpecifier.line, typeSpecifier))
+                recover();
+        }
+        if (typeSpecifier.array)
+            type->setArraySize(typeSpecifier.arraySize);
+        if (typeSpecifier.userDef) {
+            type->setStruct(typeSpecifier.userDef->getStruct());
+        }
+
+        if (structNestingErrorCheck(typeSpecifier.line, *(*fieldList)[i])) {
+            recover();
+        }
+    }
+
+    return fieldList;
+}
+
+TPublicType TParseContext::addStructure(const TSourceLoc& structLine, const TSourceLoc& nameLine, const TString *structName, TFieldList* fieldList)
+{
+    TStructure* structure = new TStructure(structName, fieldList);
+    TType* structureType = new TType(structure);
+
+    structure->setUniqueId(TSymbolTable::nextUniqueId());
+
+    if (!structName->empty())
+    {
+        if (reservedErrorCheck(nameLine, *structName))
+        {
+            recover();
+        }
+        TVariable* userTypeDef = new TVariable(structName, *structureType, true);
+        if (!symbolTable.declare(userTypeDef)) {
+            error(nameLine, "redefinition", structName->c_str(), "struct");
+            recover();
+        }
+    }
+
+    // ensure we do not specify any storage qualifiers on the struct members
+    for (unsigned int typeListIndex = 0; typeListIndex < fieldList->size(); typeListIndex++)
+    {
+        const TField &field = *(*fieldList)[typeListIndex];
+        const TQualifier qualifier = field.type()->getQualifier();
+        switch (qualifier)
+        {
+          case EvqGlobal:
+          case EvqTemporary:
+            break;
+          default:
+            error(field.line(), "invalid qualifier on struct member", getQualifierString(qualifier));
+            recover();
+            break;
+        }
+    }
+
+    TPublicType publicType;
+    publicType.setBasic(EbtStruct, EvqTemporary, structLine);
+    publicType.userDef = structureType;
+    exitStructDeclaration();
+
+    return publicType;
+}
+
 //
 // Parse an array of strings using yyparse.
 //
diff --git a/src/3rdparty/angle/src/compiler/translator/ParseContext.h b/src/3rdparty/angle/src/compiler/translator/ParseContext.h
index b324e575d3..1f4cbdeba9 100644
--- a/src/3rdparty/angle/src/compiler/translator/ParseContext.h
+++ b/src/3rdparty/angle/src/compiler/translator/ParseContext.h
@@ -1,17 +1,17 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 #ifndef _PARSER_HELPER_INCLUDED_
 #define _PARSER_HELPER_INCLUDED_
 
+#include "compiler/translator/Compiler.h"
 #include "compiler/translator/Diagnostics.h"
 #include "compiler/translator/DirectiveHandler.h"
-#include "compiler/translator/localintermediate.h"
-#include "compiler/preprocessor/Preprocessor.h"
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/Intermediate.h"
 #include "compiler/translator/SymbolTable.h"
+#include "compiler/preprocessor/Preprocessor.h"
 
 struct TMatrixFields {
     bool wholeRow;
@@ -25,7 +25,7 @@ struct TMatrixFields {
 // they can be passed to the parser without needing a global.
 //
 struct TParseContext {
-    TParseContext(TSymbolTable& symt, TExtensionBehavior& ext, TIntermediate& interm, ShShaderType type, ShShaderSpec spec, int options, bool checksPrecErrors, const char* sourcePath, TInfoSink& is) :
+    TParseContext(TSymbolTable& symt, TExtensionBehavior& ext, TIntermediate& interm, sh::GLenum type, ShShaderSpec spec, int options, bool checksPrecErrors, const char* sourcePath, TInfoSink& is) :
             intermediate(interm),
             symbolTable(symt),
             shaderType(type),
@@ -38,14 +38,18 @@ struct TParseContext {
             currentFunctionType(NULL),
             functionReturnsValue(false),
             checksPrecisionErrors(checksPrecErrors),
+            defaultMatrixPacking(EmpColumnMajor),
+            defaultBlockStorage(EbsShared),
             diagnostics(is),
-            directiveHandler(ext, diagnostics),
+            shaderVersion(100),
+            directiveHandler(ext, diagnostics, shaderVersion),
             preprocessor(&diagnostics, &directiveHandler),
             scanner(NULL) {  }
     TIntermediate& intermediate; // to hold and build a parse tree
     TSymbolTable& symbolTable;   // symbol table that goes with the language currently being parsed
-    ShShaderType shaderType;              // vertex or fragment language (future: pack or unpack)
+    sh::GLenum shaderType;              // vertex or fragment language (future: pack or unpack)
     ShShaderSpec shaderSpec;              // The language specification compiler conforms to - GLES2 or WebGL.
+    int shaderVersion;
     int compileOptions;
     const char* sourcePath;      // Path of source file or NULL.
     TIntermNode* treeRoot;       // root of parse tree being created
@@ -55,12 +59,15 @@ struct TParseContext {
     bool functionReturnsValue;   // true if a non-void function has a return
     bool checksPrecisionErrors;  // true if an error will be generated when a variable is declared without precision, explicit or implicit.
     bool fragmentPrecisionHigh;  // true if highp precision is supported in the fragment language.
+    TLayoutMatrixPacking defaultMatrixPacking;
+    TLayoutBlockStorage defaultBlockStorage;
     TString HashErrMsg;
     TDiagnostics diagnostics;
     TDirectiveHandler directiveHandler;
     pp::Preprocessor preprocessor;
     void* scanner;
 
+    int getShaderVersion() const { return shaderVersion; }
     int numErrors() const { return diagnostics.numErrors(); }
     TInfoSink& infoSink() { return diagnostics.infoSink(); }
     void error(const TSourceLoc& loc, const char *reason, const char* token,
@@ -70,8 +77,11 @@ struct TParseContext {
     void trace(const char* str);
     void recover();
 
+    // This method is guaranteed to succeed, even if no variable with 'name' exists.
+    const TVariable *getNamedVariable(const TSourceLoc &location, const TString *name, const TSymbol *symbol);
+
     bool parseVectorFields(const TString&, int vecSize, TVectorFields&, const TSourceLoc& line);
-    bool parseMatrixFields(const TString&, int matSize, TMatrixFields&, const TSourceLoc& line);
+    bool parseMatrixFields(const TString&, int matCols, int matRows, TMatrixFields&, const TSourceLoc& line);
 
     bool reservedErrorCheck(const TSourceLoc& line, const TString& identifier);
     void assignError(const TSourceLoc& line, const char* op, TString left, TString right);
@@ -86,38 +96,66 @@ struct TParseContext {
     bool arraySizeErrorCheck(const TSourceLoc& line, TIntermTyped* expr, int& size);
     bool arrayQualifierErrorCheck(const TSourceLoc& line, TPublicType type);
     bool arrayTypeErrorCheck(const TSourceLoc& line, TPublicType type);
-    bool arrayErrorCheck(const TSourceLoc& line, TString& identifier, TPublicType type, TVariable*& variable);
+    bool arrayErrorCheck(const TSourceLoc& line, const TString& identifier, const TPublicType &type, TVariable*& variable);
     bool voidErrorCheck(const TSourceLoc&, const TString&, const TPublicType&);
     bool boolErrorCheck(const TSourceLoc&, const TIntermTyped*);
     bool boolErrorCheck(const TSourceLoc&, const TPublicType&);
     bool samplerErrorCheck(const TSourceLoc& line, const TPublicType& pType, const char* reason);
     bool structQualifierErrorCheck(const TSourceLoc& line, const TPublicType& pType);
+    bool locationDeclaratorListCheck(const TSourceLoc& line, const TPublicType &pType);
     bool parameterSamplerErrorCheck(const TSourceLoc& line, TQualifier qualifier, const TType& type);
-    bool nonInitConstErrorCheck(const TSourceLoc& line, TString& identifier, TPublicType& type, bool array);
-    bool nonInitErrorCheck(const TSourceLoc& line, TString& identifier, TPublicType& type, TVariable*& variable);
+    bool nonInitConstErrorCheck(const TSourceLoc& line, const TString& identifier, TPublicType& type, bool array);
+    bool nonInitErrorCheck(const TSourceLoc& line, const TString& identifier, const TPublicType& type, TVariable*& variable);
     bool paramErrorCheck(const TSourceLoc& line, TQualifier qualifier, TQualifier paramQualifier, TType* type);
     bool extensionErrorCheck(const TSourceLoc& line, const TString&);
+    bool singleDeclarationErrorCheck(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier);
+    bool layoutLocationErrorCheck(const TSourceLoc& location, const TLayoutQualifier &layoutQualifier);
 
     const TPragma& pragma() const { return directiveHandler.pragma(); }
     const TExtensionBehavior& extensionBehavior() const { return directiveHandler.extensionBehavior(); }
     bool supportsExtension(const char* extension);
     bool isExtensionEnabled(const char* extension) const;
+    void handleExtensionDirective(const TSourceLoc& loc, const char* extName, const char* behavior);
+    void handlePragmaDirective(const TSourceLoc& loc, const char* name, const char* value);
 
     bool containsSampler(TType& type);
     bool areAllChildConst(TIntermAggregate* aggrNode);
-    const TFunction* findFunction(const TSourceLoc& line, TFunction* pfnCall, bool *builtIn = 0);
-    bool executeInitializer(const TSourceLoc& line, TString& identifier, TPublicType& pType,
+    const TFunction* findFunction(const TSourceLoc& line, TFunction* pfnCall, int shaderVersion, bool *builtIn = 0);
+    bool executeInitializer(const TSourceLoc& line, const TString& identifier, TPublicType& pType,
                             TIntermTyped* initializer, TIntermNode*& intermNode, TVariable* variable = 0);
 
+    TPublicType addFullySpecifiedType(TQualifier qualifier, const TPublicType& typeSpecifier);
+    TPublicType addFullySpecifiedType(TQualifier qualifier, TLayoutQualifier layoutQualifier, const TPublicType& typeSpecifier);
+    TIntermAggregate* parseSingleDeclaration(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier);
+    TIntermAggregate* parseSingleArrayDeclaration(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& indexLocation, TIntermTyped *indexExpression);
+    TIntermAggregate* parseSingleInitDeclaration(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& initLocation, TIntermTyped *initializer);
+    TIntermAggregate* parseInvariantDeclaration(const TSourceLoc &invariantLoc, const TSourceLoc &identifierLoc, const TString *identifier, const TSymbol *symbol);
+
+    TIntermAggregate* parseDeclarator(TPublicType &publicType, TIntermAggregate *aggregateDeclaration, TSymbol *identifierSymbol, const TSourceLoc& identifierLocation, const TString &identifier);
+    TIntermAggregate* parseArrayDeclarator(TPublicType &publicType, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& arrayLocation, TIntermNode *declaratorList, TIntermTyped *indexExpression);
+    TIntermAggregate* parseInitDeclarator(TPublicType &publicType, TIntermAggregate *declaratorList, const TSourceLoc& identifierLocation, const TString &identifier, const TSourceLoc& initLocation, TIntermTyped *initializer);
+    void parseGlobalLayoutQualifier(const TPublicType &typeQualifier);
+    TFunction *addConstructorFunc(TPublicType publicType);
     TIntermTyped* addConstructor(TIntermNode*, const TType*, TOperator, TFunction*, const TSourceLoc&);
     TIntermTyped* foldConstConstructor(TIntermAggregate* aggrNode, const TType& type);
-    TIntermTyped* constructStruct(TIntermNode*, TType*, int, const TSourceLoc&, bool subset);
-    TIntermTyped* constructBuiltIn(const TType*, TOperator, TIntermNode*, const TSourceLoc&, bool subset);
     TIntermTyped* addConstVectorNode(TVectorFields&, TIntermTyped*, const TSourceLoc&);
     TIntermTyped* addConstMatrixNode(int , TIntermTyped*, const TSourceLoc&);
     TIntermTyped* addConstArrayNode(int index, TIntermTyped* node, const TSourceLoc& line);
-    TIntermTyped* addConstStruct(TString& , TIntermTyped*, const TSourceLoc&);
+    TIntermTyped* addConstStruct(const TString &identifier, TIntermTyped *node, const TSourceLoc& line);
     TIntermTyped* addIndexExpression(TIntermTyped *baseExpression, const TSourceLoc& location, TIntermTyped *indexExpression);
+    TIntermTyped* addFieldSelectionExpression(TIntermTyped *baseExpression, const TSourceLoc& dotLocation, const TString &fieldString, const TSourceLoc& fieldLocation);
+
+    TFieldList *addStructDeclaratorList(const TPublicType& typeSpecifier, TFieldList *fieldList);
+    TPublicType addStructure(const TSourceLoc& structLine, const TSourceLoc& nameLine, const TString *structName, TFieldList* fieldList);
+
+    TIntermAggregate* addInterfaceBlock(const TPublicType& typeQualifier, const TSourceLoc& nameLine, const TString& blockName, TFieldList* fieldList, 
+                                        const TString* instanceName, const TSourceLoc& instanceLine, TIntermTyped* arrayIndex, const TSourceLoc& arrayIndexLine);
+
+    TLayoutQualifier parseLayoutQualifier(const TString &qualifierType, const TSourceLoc& qualifierTypeLine);
+    TLayoutQualifier parseLayoutQualifier(const TString &qualifierType, const TSourceLoc& qualifierTypeLine, const TString &intValueString, int intValue, const TSourceLoc& intValueLine);
+    TLayoutQualifier joinLayoutQualifiers(TLayoutQualifier leftQualifier, TLayoutQualifier rightQualifier);
+    TPublicType joinInterpolationQualifiers(const TSourceLoc &interpolationLoc, TQualifier interpolationQualifier,
+                                            const TSourceLoc &storageLoc, TQualifier storageQualifier);
 
     // Performs an error check for embedded struct declarations.
     // Returns true if an error was raised due to the declaration of
diff --git a/src/3rdparty/angle/src/compiler/translator/PoolAlloc.cpp b/src/3rdparty/angle/src/compiler/translator/PoolAlloc.cpp
index abe70262f2..887cb66504 100644
--- a/src/3rdparty/angle/src/compiler/translator/PoolAlloc.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/PoolAlloc.cpp
@@ -6,43 +6,44 @@
 
 #include "compiler/translator/PoolAlloc.h"
 
-#ifndef _MSC_VER
-#include <stdint.h>
-#endif
-#include <stdio.h>
+#include "compiler/translator/InitializeGlobals.h"
 
+#include "common/platform.h"
 #include "common/angleutils.h"
-#include "compiler/translator/InitializeGlobals.h"
-#include "compiler/translator/osinclude.h"
+#include "common/tls.h"
+
+#include <stdint.h>
+#include <stdio.h>
+#include <assert.h>
 
-OS_TLSIndex PoolIndex = OS_INVALID_TLS_INDEX;
+TLSIndex PoolIndex = TLS_INVALID_INDEX;
 
 bool InitializePoolIndex()
 {
-    assert(PoolIndex == OS_INVALID_TLS_INDEX);
+    assert(PoolIndex == TLS_INVALID_INDEX);
 
-    PoolIndex = OS_AllocTLSIndex();
-    return PoolIndex != OS_INVALID_TLS_INDEX;
+    PoolIndex = CreateTLSIndex();
+    return PoolIndex != TLS_INVALID_INDEX;
 }
 
 void FreePoolIndex()
 {
-    assert(PoolIndex != OS_INVALID_TLS_INDEX);
+    assert(PoolIndex != TLS_INVALID_INDEX);
 
-    OS_FreeTLSIndex(PoolIndex);
-    PoolIndex = OS_INVALID_TLS_INDEX;
+    DestroyTLSIndex(PoolIndex);
+    PoolIndex = TLS_INVALID_INDEX;
 }
 
 TPoolAllocator* GetGlobalPoolAllocator()
 {
-    assert(PoolIndex != OS_INVALID_TLS_INDEX);
-    return static_cast<TPoolAllocator*>(OS_GetTLSValue(PoolIndex));
+    assert(PoolIndex != TLS_INVALID_INDEX);
+    return static_cast<TPoolAllocator*>(GetTLSValue(PoolIndex));
 }
 
 void SetGlobalPoolAllocator(TPoolAllocator* poolAllocator)
 {
-    assert(PoolIndex != OS_INVALID_TLS_INDEX);
-    OS_SetTLSValue(PoolIndex, poolAllocator);
+    assert(PoolIndex != TLS_INVALID_INDEX);
+    SetTLSValue(PoolIndex, poolAllocator);
 }
 
 //
diff --git a/src/3rdparty/angle/src/compiler/translator/QualifierAlive.cpp b/src/3rdparty/angle/src/compiler/translator/QualifierAlive.cpp
index 1ba087e176..1f6fb75821 100644
--- a/src/3rdparty/angle/src/compiler/translator/QualifierAlive.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/QualifierAlive.cpp
@@ -4,7 +4,7 @@
 // found in the LICENSE file.
 //
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 class TAliveTraverser : public TIntermTraverser {
 public:
diff --git a/src/3rdparty/angle/src/compiler/translator/RegenerateStructNames.cpp b/src/3rdparty/angle/src/compiler/translator/RegenerateStructNames.cpp
new file mode 100644
index 0000000000..767b18085c
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/RegenerateStructNames.cpp
@@ -0,0 +1,82 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "compiler/translator/RegenerateStructNames.h"
+#include "compiler/translator/compilerdebug.h"
+
+void RegenerateStructNames::visitSymbol(TIntermSymbol *symbol)
+{
+    ASSERT(symbol);
+    TType *type = symbol->getTypePointer();
+    ASSERT(type);
+    TStructure *userType = type->getStruct();
+    if (!userType)
+        return;
+
+    if (mSymbolTable.findBuiltIn(userType->name(), mShaderVersion))
+    {
+        // Built-in struct, do not touch it.
+        return;
+    }
+
+    int uniqueId = userType->uniqueId();
+
+    ASSERT(mScopeDepth > 0);
+    if (mScopeDepth == 1)
+    {
+        // If a struct is defined at global scope, we don't map its name.
+        // This is because at global level, the struct might be used to
+        // declare a uniform, so the same name needs to stay the same for
+        // vertex/fragment shaders. However, our mapping uses internal ID,
+        // which will be different for the same struct in vertex/fragment
+        // shaders.
+        // This is OK because names for any structs defined in other scopes
+        // will begin with "_webgl", which is reserved. So there will be
+        // no conflicts among unmapped struct names from global scope and
+        // mapped struct names from other scopes.
+        // However, we need to keep track of these global structs, so if a
+        // variable is used in a local scope, we don't try to modify the
+        // struct name through that variable.
+        mDeclaredGlobalStructs.insert(uniqueId);
+        return;
+    }
+    if (mDeclaredGlobalStructs.count(uniqueId) > 0)
+        return;
+    // Map {name} to _webgl_struct_{uniqueId}_{name}.
+    const char kPrefix[] = "_webgl_struct_";
+    if (userType->name().find(kPrefix) == 0)
+    {
+        // The name has already been regenerated.
+        return;
+    }
+    std::string id = Str(uniqueId);
+    TString tmp = kPrefix + TString(id.c_str());
+    tmp += "_" + userType->name();
+    userType->setName(tmp);
+}
+
+bool RegenerateStructNames::visitAggregate(Visit, TIntermAggregate *aggregate)
+{
+    ASSERT(aggregate);
+    switch (aggregate->getOp())
+    {
+      case EOpSequence:
+        ++mScopeDepth;
+        {
+            TIntermSequence &sequence = *(aggregate->getSequence());
+            for (size_t ii = 0; ii < sequence.size(); ++ii)
+            {
+                TIntermNode *node = sequence[ii];
+                ASSERT(node != NULL);
+                node->traverse(this);
+            }
+        }
+        --mScopeDepth;
+        return false;
+      default:
+        return true;
+    }
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/RegenerateStructNames.h b/src/3rdparty/angle/src/compiler/translator/RegenerateStructNames.h
new file mode 100644
index 0000000000..ac87600347
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/RegenerateStructNames.h
@@ -0,0 +1,40 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#ifndef COMPILER_TRANSLATOR_REGENERATE_STRUCT_NAMES_H_
+#define COMPILER_TRANSLATOR_REGENERATE_STRUCT_NAMES_H_
+
+#include "compiler/translator/Intermediate.h"
+#include "compiler/translator/SymbolTable.h"
+
+#include <set>
+
+class RegenerateStructNames : public TIntermTraverser
+{
+  public:
+    RegenerateStructNames(const TSymbolTable &symbolTable,
+                          int shaderVersion)
+        : mSymbolTable(symbolTable),
+          mShaderVersion(shaderVersion),
+          mScopeDepth(0) {}
+
+  protected:
+    virtual void visitSymbol(TIntermSymbol *);
+    virtual bool visitAggregate(Visit, TIntermAggregate *);
+
+  private:
+    const TSymbolTable &mSymbolTable;
+    int mShaderVersion;
+
+    // Indicating the depth of the current scope.
+    // The global scope is 1.
+    int mScopeDepth;
+
+    // If a struct's declared globally, push its ID in this set.
+    std::set<int> mDeclaredGlobalStructs;
+};
+
+#endif  // COMPILER_TRANSLATOR_REGENERATE_STRUCT_NAMES_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/RemoveTree.cpp b/src/3rdparty/angle/src/compiler/translator/RemoveTree.cpp
index 92e5dbbfe1..0cf6910aa2 100644
--- a/src/3rdparty/angle/src/compiler/translator/RemoveTree.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/RemoveTree.cpp
@@ -4,74 +4,26 @@
 // found in the LICENSE file.
 //
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/RemoveTree.h"
 
 //
-// Code to recursively delete the intermediate tree.
+// Code to delete the intermediate tree.
 //
-
-class RemoveTree : public TIntermTraverser
-{
-public:
-	RemoveTree() : TIntermTraverser(false, false, true)
-	{
-	}
-
-protected:
-	void visitSymbol(TIntermSymbol*);
-	void visitConstantUnion(TIntermConstantUnion*);
-	bool visitBinary(Visit visit, TIntermBinary*);
-	bool visitUnary(Visit visit, TIntermUnary*);
-	bool visitSelection(Visit visit, TIntermSelection*);
-	bool visitAggregate(Visit visit, TIntermAggregate*);
-};
-
-void RemoveTree::visitSymbol(TIntermSymbol* node)
-{
-	delete node;
-}
-
-bool RemoveTree::visitBinary(Visit visit, TIntermBinary* node)
-{
-	delete node;
-
-	return true;
-}
-
-bool RemoveTree::visitUnary(Visit visit, TIntermUnary* node)
-{
-    delete node;
-
-	return true;
-}
-
-bool RemoveTree::visitAggregate(Visit visit, TIntermAggregate* node)
+void RemoveAllTreeNodes(TIntermNode* root)
 {
-	delete node;
+    std::queue<TIntermNode*> nodeQueue;
 
-	return true;
-}
+    nodeQueue.push(root);
 
-bool RemoveTree::visitSelection(Visit visit, TIntermSelection* node)
-{
-	delete node;
+    while (!nodeQueue.empty())
+    {
+        TIntermNode *node = nodeQueue.front();
+        nodeQueue.pop();
 
-	return true;
-}
-
-void RemoveTree::visitConstantUnion(TIntermConstantUnion* node)
-{
-	delete node;
-}
-
-//
-// Entry point.
-//
-void RemoveAllTreeNodes(TIntermNode* root)
-{
-    RemoveTree it;
+        node->enqueueChildren(&nodeQueue);
 
-    root->traverse(&it);
+        delete node;
+    }
 }
 
diff --git a/src/3rdparty/angle/src/compiler/translator/RenameFunction.h b/src/3rdparty/angle/src/compiler/translator/RenameFunction.h
index 1f7fb16c45..d43e6ef7be 100644
--- a/src/3rdparty/angle/src/compiler/translator/RenameFunction.h
+++ b/src/3rdparty/angle/src/compiler/translator/RenameFunction.h
@@ -7,7 +7,7 @@
 #ifndef COMPILER_RENAME_FUNCTION
 #define COMPILER_RENAME_FUNCTION
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 //
 // Renames a function, including its declaration and any calls to it.
diff --git a/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.cpp b/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.cpp
index 48e87cd57a..b03beb5c6c 100644
--- a/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.cpp
@@ -14,6 +14,24 @@
 namespace sh
 {
 
+namespace
+{
+
+class ElseBlockRewriter : public TIntermTraverser
+{
+  public:
+    ElseBlockRewriter();
+
+  protected:
+    bool visitAggregate(Visit visit, TIntermAggregate *aggregate);
+
+  private:
+    int mTemporaryIndex;
+    const TType *mFunctionType;
+
+    TIntermNode *rewriteSelection(TIntermSelection *selection);
+};
+
 TIntermSymbol *MakeNewTemporary(const TString &name, TBasicType type)
 {
     TType variableType(type, EbpHigh, EvqInternal);
@@ -36,25 +54,45 @@ TIntermUnary *MakeNewUnary(TOperator op, TIntermTyped *operand)
     return unary;
 }
 
+ElseBlockRewriter::ElseBlockRewriter()
+    : TIntermTraverser(true, false, true, false),
+      mTemporaryIndex(0),
+      mFunctionType(NULL)
+{}
+
 bool ElseBlockRewriter::visitAggregate(Visit visit, TIntermAggregate *node)
 {
     switch (node->getOp())
     {
       case EOpSequence:
+        if (visit == PostVisit)
         {
-            for (size_t statementIndex = 0; statementIndex != node->getSequence().size(); statementIndex++)
+            for (size_t statementIndex = 0; statementIndex != node->getSequence()->size(); statementIndex++)
             {
-                TIntermNode *statement = node->getSequence()[statementIndex];
+                TIntermNode *statement = (*node->getSequence())[statementIndex];
                 TIntermSelection *selection = statement->getAsSelectionNode();
                 if (selection && selection->getFalseBlock() != NULL)
                 {
-                    node->getSequence()[statementIndex] = rewriteSelection(selection);
+                    // Check for if / else if
+                    TIntermSelection *elseIfBranch = selection->getFalseBlock()->getAsSelectionNode();
+                    if (elseIfBranch)
+                    {
+                        selection->replaceChildNode(elseIfBranch, rewriteSelection(elseIfBranch));
+                        delete elseIfBranch;
+                    }
+
+                    (*node->getSequence())[statementIndex] = rewriteSelection(selection);
                     delete selection;
                 }
             }
         }
         break;
 
+      case EOpFunction:
+        // Store the current function context (see comment below)
+        mFunctionType = ((visit == PreVisit) ? &node->getType() : NULL);
+        break;
+
       default: break;
     }
 
@@ -63,32 +101,54 @@ bool ElseBlockRewriter::visitAggregate(Visit visit, TIntermAggregate *node)
 
 TIntermNode *ElseBlockRewriter::rewriteSelection(TIntermSelection *selection)
 {
-    ASSERT(selection->getFalseBlock() != NULL);
+    ASSERT(selection != NULL);
 
     TString temporaryName = "cond_" + str(mTemporaryIndex++);
     TIntermTyped *typedCondition = selection->getCondition()->getAsTyped();
     TType resultType(EbtBool, EbpUndefined);
-    TIntermSymbol *conditionSymbolA = MakeNewTemporary(temporaryName, EbtBool);
-    TIntermSymbol *conditionSymbolB = MakeNewTemporary(temporaryName, EbtBool);
-    TIntermSymbol *conditionSymbolC = MakeNewTemporary(temporaryName, EbtBool);
-    TIntermBinary *storeCondition = MakeNewBinary(EOpInitialize, conditionSymbolA,
+    TIntermSymbol *conditionSymbolInit = MakeNewTemporary(temporaryName, EbtBool);
+    TIntermBinary *storeCondition = MakeNewBinary(EOpInitialize, conditionSymbolInit,
                                                   typedCondition, resultType);
-    TIntermUnary *negatedCondition = MakeNewUnary(EOpLogicalNot, conditionSymbolB);
-    TIntermSelection *falseBlock = new TIntermSelection(negatedCondition,
-                                                        selection->getFalseBlock(), NULL);
-    TIntermSelection *newIfElse = new TIntermSelection(conditionSymbolC,
-                                                       selection->getTrueBlock(), falseBlock);
+    TIntermNode *negatedElse = NULL;
+
+    TIntermSelection *falseBlock = NULL;
+
+    if (selection->getFalseBlock())
+    {
+        // crbug.com/346463
+        // D3D generates error messages claiming a function has no return value, when rewriting
+        // an if-else clause that returns something non-void in a function. By appending dummy
+        // returns (that are unreachable) we can silence this compile error.
+        if (mFunctionType && mFunctionType->getBasicType() != EbtVoid)
+        {
+            TString typeString = mFunctionType->getStruct() ? mFunctionType->getStruct()->name() :
+                mFunctionType->getBasicString();
+            TString rawText = "return (" + typeString + ")0";
+            negatedElse = new TIntermRaw(*mFunctionType, rawText);
+        }
+
+        TIntermSymbol *conditionSymbolElse = MakeNewTemporary(temporaryName, EbtBool);
+        TIntermUnary *negatedCondition = MakeNewUnary(EOpLogicalNot, conditionSymbolElse);
+        falseBlock = new TIntermSelection(negatedCondition,
+                                          selection->getFalseBlock(), negatedElse);
+    }
+
+    TIntermSymbol *conditionSymbolSel = MakeNewTemporary(temporaryName, EbtBool);
+    TIntermSelection *newSelection = new TIntermSelection(conditionSymbolSel,
+                                                          selection->getTrueBlock(), falseBlock);
 
     TIntermAggregate *declaration = new TIntermAggregate(EOpDeclaration);
-    declaration->getSequence().push_back(storeCondition);
+    declaration->getSequence()->push_back(storeCondition);
 
     TIntermAggregate *block = new TIntermAggregate(EOpSequence);
-    block->getSequence().push_back(declaration);
-    block->getSequence().push_back(newIfElse);
+    block->getSequence()->push_back(declaration);
+    block->getSequence()->push_back(newSelection);
 
     return block;
 }
 
+}
+
 void RewriteElseBlocks(TIntermNode *node)
 {
     ElseBlockRewriter rewriter;
diff --git a/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.h b/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.h
index 10221335ce..d87baea0fe 100644
--- a/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.h
+++ b/src/3rdparty/angle/src/compiler/translator/RewriteElseBlocks.h
@@ -10,28 +10,11 @@
 #ifndef COMPILER_REWRITE_ELSE_BLOCKS_H_
 #define COMPILER_REWRITE_ELSE_BLOCKS_H_
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 namespace sh
 {
 
-class ElseBlockRewriter : public TIntermTraverser
-{
-  public:
-      ElseBlockRewriter()
-          : TIntermTraverser(false, false, true, false)
-          , mTemporaryIndex(0)
-      {}
-
-  protected:
-    bool visitAggregate(Visit visit, TIntermAggregate *aggregate);
-
-  private:
-    int mTemporaryIndex;
-
-    TIntermNode *rewriteSelection(TIntermSelection *selection);
-};
-
 void RewriteElseBlocks(TIntermNode *node);
 
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.cpp b/src/3rdparty/angle/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.cpp
new file mode 100644
index 0000000000..8857ad59bd
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.cpp
@@ -0,0 +1,277 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "compiler/translator/ScalarizeVecAndMatConstructorArgs.h"
+#include "compiler/translator/compilerdebug.h"
+
+#include <algorithm>
+
+#include "angle_gl.h"
+#include "common/angleutils.h"
+
+namespace
+{
+
+bool ContainsMatrixNode(const TIntermSequence &sequence)
+{
+    for (size_t ii = 0; ii < sequence.size(); ++ii)
+    {
+        TIntermTyped *node = sequence[ii]->getAsTyped();
+        if (node && node->isMatrix())
+            return true;
+    }
+    return false;
+}
+
+bool ContainsVectorNode(const TIntermSequence &sequence)
+{
+    for (size_t ii = 0; ii < sequence.size(); ++ii)
+    {
+        TIntermTyped *node = sequence[ii]->getAsTyped();
+        if (node && node->isVector())
+            return true;
+    }
+    return false;
+}
+
+TIntermConstantUnion *ConstructIndexNode(int index)
+{
+    ConstantUnion *u = new ConstantUnion[1];
+    u[0].setIConst(index);
+
+    TType type(EbtInt, EbpUndefined, EvqConst, 1);
+    TIntermConstantUnion *node = new TIntermConstantUnion(u, type);
+    return node;
+}
+
+TIntermBinary *ConstructVectorIndexBinaryNode(TIntermSymbol *symbolNode, int index)
+{
+    TIntermBinary *binary = new TIntermBinary(EOpIndexDirect);
+    binary->setLeft(symbolNode);
+    TIntermConstantUnion *indexNode = ConstructIndexNode(index);
+    binary->setRight(indexNode);
+    return binary;
+}
+
+TIntermBinary *ConstructMatrixIndexBinaryNode(
+    TIntermSymbol *symbolNode, int colIndex, int rowIndex)
+{
+    TIntermBinary *colVectorNode =
+        ConstructVectorIndexBinaryNode(symbolNode, colIndex);
+
+    TIntermBinary *binary = new TIntermBinary(EOpIndexDirect);
+    binary->setLeft(colVectorNode);
+    TIntermConstantUnion *rowIndexNode = ConstructIndexNode(rowIndex);
+    binary->setRight(rowIndexNode);
+    return binary;
+}
+
+}  // namespace anonymous
+
+bool ScalarizeVecAndMatConstructorArgs::visitAggregate(Visit visit, TIntermAggregate *node)
+{
+    if (visit == PreVisit)
+    {
+        switch (node->getOp())
+        {
+          case EOpSequence:
+            mSequenceStack.push_back(TIntermSequence());
+            {
+                for (TIntermSequence::const_iterator iter = node->getSequence()->begin();
+                     iter != node->getSequence()->end(); ++iter)
+                {
+                    TIntermNode *child = *iter;
+                    ASSERT(child != NULL);
+                    child->traverse(this);
+                    mSequenceStack.back().push_back(child);
+                }
+            }
+            if (mSequenceStack.back().size() > node->getSequence()->size())
+            {
+                node->getSequence()->clear();
+                *(node->getSequence()) = mSequenceStack.back();
+            }
+            mSequenceStack.pop_back();
+            return false;
+          case EOpConstructVec2:
+          case EOpConstructVec3:
+          case EOpConstructVec4:
+          case EOpConstructBVec2:
+          case EOpConstructBVec3:
+          case EOpConstructBVec4:
+          case EOpConstructIVec2:
+          case EOpConstructIVec3:
+          case EOpConstructIVec4:
+            if (ContainsMatrixNode(*(node->getSequence())))
+                scalarizeArgs(node, false, true);
+            break;
+          case EOpConstructMat2:
+          case EOpConstructMat3:
+          case EOpConstructMat4:
+            if (ContainsVectorNode(*(node->getSequence())))
+                scalarizeArgs(node, true, false);
+            break;
+          default:
+            break;
+        }
+    }
+    return true;
+}
+
+void ScalarizeVecAndMatConstructorArgs::scalarizeArgs(
+    TIntermAggregate *aggregate, bool scalarizeVector, bool scalarizeMatrix)
+{
+    ASSERT(aggregate);
+    int size = 0;
+    switch (aggregate->getOp())
+    {
+      case EOpConstructVec2:
+      case EOpConstructBVec2:
+      case EOpConstructIVec2:
+        size = 2;
+        break;
+      case EOpConstructVec3:
+      case EOpConstructBVec3:
+      case EOpConstructIVec3:
+        size = 3;
+        break;
+      case EOpConstructVec4:
+      case EOpConstructBVec4:
+      case EOpConstructIVec4:
+      case EOpConstructMat2:
+        size = 4;
+        break;
+      case EOpConstructMat3:
+        size = 9;
+        break;
+      case EOpConstructMat4:
+        size = 16;
+        break;
+      default:
+        break;
+    }
+    TIntermSequence *sequence = aggregate->getSequence();
+    TIntermSequence original(*sequence);
+    sequence->clear();
+    for (size_t ii = 0; ii < original.size(); ++ii)
+    {
+        ASSERT(size > 0);
+        TIntermTyped *node = original[ii]->getAsTyped();
+        ASSERT(node);
+        TString varName = createTempVariable(node);
+        if (node->isScalar())
+        {
+            TIntermSymbol *symbolNode =
+                new TIntermSymbol(-1, varName, node->getType());
+            sequence->push_back(symbolNode);
+            size--;
+        }
+        else if (node->isVector())
+        {
+            if (scalarizeVector)
+            {
+                int repeat = std::min(size, node->getNominalSize());
+                size -= repeat;
+                for (int index = 0; index < repeat; ++index)
+                {
+                    TIntermSymbol *symbolNode =
+                        new TIntermSymbol(-1, varName, node->getType());
+                    TIntermBinary *newNode = ConstructVectorIndexBinaryNode(
+                        symbolNode, index);
+                    sequence->push_back(newNode);
+                }
+            }
+            else
+            {
+                TIntermSymbol *symbolNode =
+                    new TIntermSymbol(-1, varName, node->getType());
+                sequence->push_back(symbolNode);
+                size -= node->getNominalSize();
+            }
+        }
+        else
+        {
+            ASSERT(node->isMatrix());
+            if (scalarizeMatrix)
+            {
+                int colIndex = 0, rowIndex = 0;
+                int repeat = std::min(size, node->getCols() * node->getRows());
+                size -= repeat;
+                while (repeat > 0)
+                {
+                    TIntermSymbol *symbolNode =
+                        new TIntermSymbol(-1, varName, node->getType());
+                    TIntermBinary *newNode = ConstructMatrixIndexBinaryNode(
+                        symbolNode, colIndex, rowIndex);
+                    sequence->push_back(newNode);
+                    rowIndex++;
+                    if (rowIndex >= node->getRows())
+                    {
+                        rowIndex = 0;
+                        colIndex++;
+                    }
+                    repeat--;
+                }
+            }
+            else
+            {
+                TIntermSymbol *symbolNode =
+                    new TIntermSymbol(-1, varName, node->getType());
+                sequence->push_back(symbolNode);
+                size -= node->getCols() * node->getRows();
+            }
+        }
+    }
+}
+
+TString ScalarizeVecAndMatConstructorArgs::createTempVariable(TIntermTyped *original)
+{
+    TString tempVarName = "_webgl_tmp_";
+    if (original->isScalar())
+    {
+        tempVarName += "scalar_";
+    }
+    else if (original->isVector())
+    {
+        tempVarName += "vec_";
+    }
+    else
+    {
+        ASSERT(original->isMatrix());
+        tempVarName += "mat_";
+    }
+    tempVarName += Str(mTempVarCount).c_str();
+    mTempVarCount++;
+
+    ASSERT(original);
+    TType type = original->getType();
+    type.setQualifier(EvqTemporary);
+
+    if (mShaderType == GL_FRAGMENT_SHADER &&
+        type.getBasicType() == EbtFloat &&
+        type.getPrecision() == EbpUndefined)
+    {
+        // We use the highest available precision for the temporary variable
+        // to avoid computing the actual precision using the rules defined
+        // in GLSL ES 1.0 Section 4.5.2.
+        type.setPrecision(mFragmentPrecisionHigh ? EbpHigh : EbpMedium);
+    }
+
+    TIntermBinary *init = new TIntermBinary(EOpInitialize);
+    TIntermSymbol *symbolNode = new TIntermSymbol(-1, tempVarName, type);
+    init->setLeft(symbolNode);
+    init->setRight(original);
+    init->setType(type);
+
+    TIntermAggregate *decl = new TIntermAggregate(EOpDeclaration);
+    decl->getSequence()->push_back(init);
+
+    ASSERT(mSequenceStack.size() > 0);
+    TIntermSequence &sequence = mSequenceStack.back();
+    sequence.push_back(decl);
+
+    return tempVarName;
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.h b/src/3rdparty/angle/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.h
new file mode 100644
index 0000000000..7c6d09c1bb
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.h
@@ -0,0 +1,47 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#ifndef COMPILER_TRANSLATOR_SCALARIZE_VEC_AND_MAT_CONSTRUCTOR_ARGS_H_
+#define COMPILER_TRANSLATOR_SCALARIZE_VEC_AND_MAT_CONSTRUCTOR_ARGS_H_
+
+#include "compiler/translator/IntermNode.h"
+
+class ScalarizeVecAndMatConstructorArgs : public TIntermTraverser
+{
+  public:
+    ScalarizeVecAndMatConstructorArgs(sh::GLenum shaderType,
+                                      bool fragmentPrecisionHigh)
+        : mTempVarCount(0),
+          mShaderType(shaderType),
+          mFragmentPrecisionHigh(fragmentPrecisionHigh) {}
+
+  protected:
+    virtual bool visitAggregate(Visit visit, TIntermAggregate *node);
+
+  private:
+    void scalarizeArgs(TIntermAggregate *aggregate,
+                       bool scalarizeVector, bool scalarizeMatrix);
+
+    // If we have the following code:
+    //   mat4 m(0);
+    //   vec4 v(1, m);
+    // We will rewrite to:
+    //   mat4 m(0);
+    //   mat4 _webgl_tmp_mat_0 = m;
+    //   vec4 v(1, _webgl_tmp_mat_0[0][0], _webgl_tmp_mat_0[0][1], _webgl_tmp_mat_0[0][2]);
+    // This function is to create nodes for "mat4 _webgl_tmp_mat_0 = m;" and insert it to
+    // the code sequence.
+    // Return the temporary variable name.
+    TString createTempVariable(TIntermTyped *original);
+
+    std::vector<TIntermSequence> mSequenceStack;
+    int mTempVarCount;
+
+    sh::GLenum mShaderType;
+    bool mFragmentPrecisionHigh;
+};
+
+#endif  // COMPILER_TRANSLATOR_SCALARIZE_VEC_AND_MAT_CONSTRUCTOR_ARGS_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/SearchSymbol.h b/src/3rdparty/angle/src/compiler/translator/SearchSymbol.h
index 8ddd3cb1ac..029ac30b9a 100644
--- a/src/3rdparty/angle/src/compiler/translator/SearchSymbol.h
+++ b/src/3rdparty/angle/src/compiler/translator/SearchSymbol.h
@@ -9,7 +9,7 @@
 #ifndef COMPILER_SEARCHSYMBOL_H_
 #define COMPILER_SEARCHSYMBOL_H_
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/ParseContext.h"
 
 namespace sh
diff --git a/src/3rdparty/angle/src/compiler/translator/ShaderLang.cpp b/src/3rdparty/angle/src/compiler/translator/ShaderLang.cpp
index 608237860c..20ce71605c 100644
--- a/src/3rdparty/angle/src/compiler/translator/ShaderLang.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/ShaderLang.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,18 +11,33 @@
 
 #include "GLSLANG/ShaderLang.h"
 
+#include "compiler/translator/Compiler.h"
 #include "compiler/translator/InitializeDll.h"
-#include "compiler/preprocessor/length_limits.h"
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/length_limits.h"
 #include "compiler/translator/TranslatorHLSL.h"
 #include "compiler/translator/VariablePacker.h"
+#include "angle_gl.h"
+
+namespace
+{
+
+enum ShaderVariableType
+{
+    SHADERVAR_UNIFORM,
+    SHADERVAR_VARYING,
+    SHADERVAR_ATTRIBUTE,
+    SHADERVAR_OUTPUTVARIABLE,
+    SHADERVAR_INTERFACEBLOCK
+};
+    
+bool isInitialized = false;
 
 //
 // This is the platform independent interface between an OGL driver
 // and the shading language compiler.
 //
 
-static bool checkVariableMaxLengths(const ShHandle handle,
+static bool CheckVariableMaxLengths(const ShHandle handle,
                                     size_t expectedValue)
 {
     size_t activeUniformLimit = 0;
@@ -36,21 +51,118 @@ static bool checkVariableMaxLengths(const ShHandle handle,
             expectedValue == varyingLimit);
 }
 
-static bool checkMappedNameMaxLength(const ShHandle handle, size_t expectedValue)
+bool CheckMappedNameMaxLength(const ShHandle handle, size_t expectedValue)
 {
     size_t mappedNameMaxLength = 0;
     ShGetInfo(handle, SH_MAPPED_NAME_MAX_LENGTH, &mappedNameMaxLength);
     return (expectedValue == mappedNameMaxLength);
 }
 
+template <typename VarT>
+const sh::ShaderVariable *ReturnVariable(const std::vector<VarT> &infoList, int index)
+{
+    if (index < 0 || static_cast<size_t>(index) >= infoList.size())
+    {
+        return NULL;
+    }
+
+    return &infoList[index];
+}
+
+const sh::ShaderVariable *GetVariable(const TCompiler *compiler, ShShaderInfo varType, int index)
+{
+    switch (varType)
+    {
+      case SH_ACTIVE_ATTRIBUTES:
+        return ReturnVariable(compiler->getAttributes(), index);
+      case SH_ACTIVE_UNIFORMS:
+        return ReturnVariable(compiler->getExpandedUniforms(), index);
+      case SH_VARYINGS:
+        return ReturnVariable(compiler->getExpandedVaryings(), index);
+      default:
+        UNREACHABLE();
+        return NULL;
+    }
+}
+
+ShPrecisionType ConvertPrecision(sh::GLenum precision)
+{
+    switch (precision)
+    {
+      case GL_HIGH_FLOAT:
+      case GL_HIGH_INT:
+        return SH_PRECISION_HIGHP;
+      case GL_MEDIUM_FLOAT:
+      case GL_MEDIUM_INT:
+        return SH_PRECISION_MEDIUMP;
+      case GL_LOW_FLOAT:
+      case GL_LOW_INT:
+        return SH_PRECISION_LOWP;
+      default:
+        return SH_PRECISION_UNDEFINED;
+    }
+}
+
+template <typename VarT>
+const std::vector<VarT> *GetVariableList(const TCompiler *compiler, ShaderVariableType variableType);
+
+template <>
+const std::vector<sh::Uniform> *GetVariableList(const TCompiler *compiler, ShaderVariableType)
+{
+    return &compiler->getUniforms();
+}
+
+template <>
+const std::vector<sh::Varying> *GetVariableList(const TCompiler *compiler, ShaderVariableType)
+{
+    return &compiler->getVaryings();
+}
+
+template <>
+const std::vector<sh::Attribute> *GetVariableList(const TCompiler *compiler, ShaderVariableType variableType)
+{
+    return (variableType == SHADERVAR_ATTRIBUTE ?
+        &compiler->getAttributes() :
+        &compiler->getOutputVariables());
+}
+
+template <>
+const std::vector<sh::InterfaceBlock> *GetVariableList(const TCompiler *compiler, ShaderVariableType)
+{
+    return &compiler->getInterfaceBlocks();
+}
+
+template <typename VarT>
+const std::vector<VarT> *GetShaderVariables(const ShHandle handle, ShaderVariableType variableType)
+{
+    if (!handle)
+    {
+        return NULL;
+    }
+
+    TShHandleBase* base = static_cast<TShHandleBase*>(handle);
+    TCompiler* compiler = base->getAsCompiler();
+    if (!compiler)
+    {
+        return NULL;
+    }
+
+    return GetVariableList<VarT>(compiler, variableType);
+}
+
+}
+
 //
 // Driver must call this first, once, before doing any other compiler operations.
 // Subsequent calls to this function are no-op.
 //
 int ShInitialize()
 {
-    static const bool kInitialized = InitProcess();
-    return kInitialized ? 1 : 0;
+    if (!isInitialized)
+    {
+        isInitialized = InitProcess();
+    }
+    return isInitialized ? 1 : 0;
 }
 
 //
@@ -58,7 +170,11 @@ int ShInitialize()
 //
 int ShFinalize()
 {
-    DetachProcess();
+    if (isInitialized)
+    {
+        DetachProcess();
+        isInitialized = false;
+    }
     return 1;
 }
 
@@ -83,10 +199,17 @@ void ShInitBuiltInResources(ShBuiltInResources* resources)
     resources->ARB_texture_rectangle = 0;
     resources->EXT_draw_buffers = 0;
     resources->EXT_frag_depth = 0;
+    resources->EXT_shader_texture_lod = 0;
 
     // Disable highp precision in fragment shader by default.
     resources->FragmentPrecisionHigh = 0;
 
+    // GLSL ES 3.0 constants.
+    resources->MaxVertexOutputVectors = 16;
+    resources->MaxFragmentInputVectors = 15;
+    resources->MinProgramTexelOffset = -8;
+    resources->MaxProgramTexelOffset = 7;
+
     // Disable name hashing by default.
     resources->HashFunction = NULL;
 
@@ -99,7 +222,7 @@ void ShInitBuiltInResources(ShBuiltInResources* resources)
 //
 // Driver calls these to create and destroy compiler objects.
 //
-ShHandle ShConstructCompiler(ShShaderType type, ShShaderSpec spec,
+ShHandle ShConstructCompiler(sh::GLenum type, ShShaderSpec spec,
                              ShShaderOutput output,
                              const ShBuiltInResources* resources)
 {
@@ -128,8 +251,25 @@ void ShDestruct(ShHandle handle)
         DeleteCompiler(base->getAsCompiler());
 }
 
+void ShGetBuiltInResourcesString(const ShHandle handle, size_t outStringLen, char *outString)
+{
+    if (!handle || !outString)
+    {
+        return;
+    }
+
+    TShHandleBase *base = static_cast<TShHandleBase*>(handle);
+    TCompiler *compiler = base->getAsCompiler();
+    if (!compiler)
+    {
+        return;
+    }
+
+    strncpy(outString, compiler->getBuiltInResourcesString().c_str(), outStringLen);
+    outString[outStringLen - 1] = '\0';
+}
 //
-// Do an actual compile on the given strings.  The result is left 
+// Do an actual compile on the given strings.  The result is left
 // in the given compile object.
 //
 // Return:  The return value of ShCompile is really boolean, indicating
@@ -171,30 +311,30 @@ void ShGetInfo(const ShHandle handle, ShShaderInfo pname, size_t* params)
         *params = compiler->getInfoSink().obj.size() + 1;
         break;
     case SH_ACTIVE_UNIFORMS:
-        *params = compiler->getUniforms().size();
+        *params = compiler->getExpandedUniforms().size();
         break;
     case SH_ACTIVE_UNIFORM_MAX_LENGTH:
-        *params = 1 +  MAX_SYMBOL_NAME_LEN;
+        *params = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
         break;
     case SH_ACTIVE_ATTRIBUTES:
-        *params = compiler->getAttribs().size();
+        *params = compiler->getAttributes().size();
         break;
     case SH_ACTIVE_ATTRIBUTE_MAX_LENGTH:
-        *params = 1 + MAX_SYMBOL_NAME_LEN;
+        *params = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
         break;
     case SH_VARYINGS:
-        *params = compiler->getVaryings().size();
+        *params = compiler->getExpandedVaryings().size();
         break;
     case SH_VARYING_MAX_LENGTH:
-        *params = 1 + MAX_SYMBOL_NAME_LEN;
+        *params = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
         break;
     case SH_MAPPED_NAME_MAX_LENGTH:
         // Use longer length than MAX_SHORTENED_IDENTIFIER_SIZE to
         // handle array and struct dereferences.
-        *params = 1 + MAX_SYMBOL_NAME_LEN;
+        *params = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
         break;
     case SH_NAME_MAX_LENGTH:
-        *params = 1 + MAX_SYMBOL_NAME_LEN;
+        *params = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
         break;
     case SH_HASHED_NAME_MAX_LENGTH:
         if (compiler->getHashFunction() == NULL) {
@@ -203,12 +343,22 @@ void ShGetInfo(const ShHandle handle, ShShaderInfo pname, size_t* params)
             // 64 bits hashing output requires 16 bytes for hex 
             // representation.
             const char HashedNamePrefix[] = HASHED_NAME_PREFIX;
+            (void)HashedNamePrefix;
             *params = 16 + sizeof(HashedNamePrefix);
         }
         break;
     case SH_HASHED_NAMES_COUNT:
         *params = compiler->getNameMap().size();
         break;
+    case SH_SHADER_VERSION:
+        *params = compiler->getShaderVersion();
+        break;
+    case SH_RESOURCES_STRING_LENGTH:
+        *params = compiler->getBuiltInResourcesString().length() + 1;
+        break;
+    case SH_OUTPUT_TYPE:
+        *params = compiler->getOutputType();
+        break;
     default: UNREACHABLE();
     }
 }
@@ -250,7 +400,7 @@ void ShGetVariableInfo(const ShHandle handle,
                        int index,
                        size_t* length,
                        int* size,
-                       ShDataType* type,
+                       sh::GLenum* type,
                        ShPrecisionType* precision,
                        int* staticUse,
                        char* name,
@@ -267,47 +417,32 @@ void ShGetVariableInfo(const ShHandle handle,
     if (compiler == 0)
         return;
 
-    const TVariableInfoList& varList =
-        varType == SH_ACTIVE_ATTRIBUTES ? compiler->getAttribs() :
-            (varType == SH_ACTIVE_UNIFORMS ? compiler->getUniforms() :
-                compiler->getVaryings());
-    if (index < 0 || index >= static_cast<int>(varList.size()))
+    const sh::ShaderVariable *varInfo = GetVariable(compiler, varType, index);
+    if (!varInfo)
+    {
         return;
-
-    const TVariableInfo& varInfo = varList[index];
-    if (length) *length = varInfo.name.size();
-    *size = varInfo.size;
-    *type = varInfo.type;
-    switch (varInfo.precision) {
-    case EbpLow:
-        *precision = SH_PRECISION_LOWP;
-        break;
-    case EbpMedium:
-        *precision = SH_PRECISION_MEDIUMP;
-        break;
-    case EbpHigh:
-        *precision = SH_PRECISION_HIGHP;
-        break;
-    default:
-        // Some types does not support precision, for example, boolean.
-        *precision = SH_PRECISION_UNDEFINED;
-        break;
     }
-    *staticUse = varInfo.staticUse ? 1 : 0;
+
+    if (length) *length = varInfo->name.size();
+    *size = varInfo->elementCount();
+    *type = varInfo->type;
+    *precision = ConvertPrecision(varInfo->precision);
+    *staticUse = varInfo->staticUse ? 1 : 0;
 
     // This size must match that queried by
     // SH_ACTIVE_UNIFORM_MAX_LENGTH, SH_ACTIVE_ATTRIBUTE_MAX_LENGTH, SH_VARYING_MAX_LENGTH
     // in ShGetInfo, below.
-    size_t variableLength = 1 + MAX_SYMBOL_NAME_LEN;
-    ASSERT(checkVariableMaxLengths(handle, variableLength));
-    strncpy(name, varInfo.name.c_str(), variableLength);
+    size_t variableLength = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
+    ASSERT(CheckVariableMaxLengths(handle, variableLength));
+    strncpy(name, varInfo->name.c_str(), variableLength);
     name[variableLength - 1] = 0;
-    if (mappedName) {
+    if (mappedName)
+    {
         // This size must match that queried by
         // SH_MAPPED_NAME_MAX_LENGTH in ShGetInfo, below.
-        size_t maxMappedNameLength = 1 + MAX_SYMBOL_NAME_LEN;
-        ASSERT(checkMappedNameMaxLength(handle, maxMappedNameLength));
-        strncpy(mappedName, varInfo.mappedName.c_str(), maxMappedNameLength);
+        size_t maxMappedNameLength = 1 + GetGlobalMaxTokenSize(compiler->getShaderSpec());
+        ASSERT(CheckMappedNameMaxLength(handle, maxMappedNameLength));
+        strncpy(mappedName, varInfo->mappedName.c_str(), maxMappedNameLength);
         mappedName[maxMappedNameLength - 1] = 0;
     }
 }
@@ -355,22 +490,29 @@ void ShGetNameHashingEntry(const ShHandle handle,
     hashedName[len - 1] = '\0';
 }
 
-void ShGetInfoPointer(const ShHandle handle, ShShaderInfo pname, void** params)
+const std::vector<sh::Uniform> *ShGetUniforms(const ShHandle handle)
 {
-    if (!handle || !params)
-        return;
+    return GetShaderVariables<sh::Uniform>(handle, SHADERVAR_UNIFORM);
+}
 
-    TShHandleBase* base = static_cast<TShHandleBase*>(handle);
-    TranslatorHLSL* translator = base->getAsTranslatorHLSL();
-    if (!translator) return;
+const std::vector<sh::Varying> *ShGetVaryings(const ShHandle handle)
+{
+    return GetShaderVariables<sh::Varying>(handle, SHADERVAR_VARYING);
+}
 
-    switch(pname)
-    {
-    case SH_ACTIVE_UNIFORMS_ARRAY:
-        *params = (void*)&translator->getUniforms();
-        break;
-    default: UNREACHABLE();
-    }
+const std::vector<sh::Attribute> *ShGetAttributes(const ShHandle handle)
+{
+    return GetShaderVariables<sh::Attribute>(handle, SHADERVAR_ATTRIBUTE);
+}
+
+const std::vector<sh::Attribute> *ShGetOutputVariables(const ShHandle handle)
+{
+    return GetShaderVariables<sh::Attribute>(handle, SHADERVAR_OUTPUTVARIABLE);
+}
+
+const std::vector<sh::InterfaceBlock> *ShGetInterfaceBlocks(const ShHandle handle)
+{
+    return GetShaderVariables<sh::InterfaceBlock>(handle, SHADERVAR_INTERFACEBLOCK);
 }
 
 int ShCheckVariablesWithinPackingLimits(
@@ -379,12 +521,62 @@ int ShCheckVariablesWithinPackingLimits(
     if (varInfoArraySize == 0)
         return 1;
     ASSERT(varInfoArray);
-    TVariableInfoList variables;
+    std::vector<sh::ShaderVariable> variables;
     for (size_t ii = 0; ii < varInfoArraySize; ++ii)
     {
-        TVariableInfo var(varInfoArray[ii].type, varInfoArray[ii].size);
+        sh::ShaderVariable var(varInfoArray[ii].type, varInfoArray[ii].size);
         variables.push_back(var);
     }
     VariablePacker packer;
     return packer.CheckVariablesWithinPackingLimits(maxVectors, variables) ? 1 : 0;
 }
+
+bool ShGetInterfaceBlockRegister(const ShHandle handle,
+                                 const char *interfaceBlockName,
+                                 unsigned int *indexOut)
+{
+    if (!handle || !interfaceBlockName || !indexOut)
+    {
+        return false;
+    }
+
+    TShHandleBase* base = static_cast<TShHandleBase*>(handle);
+    TranslatorHLSL* translator = base->getAsTranslatorHLSL();
+    if (!translator)
+    {
+        return false;
+    }
+
+    if (!translator->hasInterfaceBlock(interfaceBlockName))
+    {
+        return false;
+    }
+
+    *indexOut = translator->getInterfaceBlockRegister(interfaceBlockName);
+    return true;
+}
+
+bool ShGetUniformRegister(const ShHandle handle,
+                          const char *uniformName,
+                          unsigned int *indexOut)
+{
+    if (!handle || !uniformName || !indexOut)
+    {
+        return false;
+    }
+
+    TShHandleBase* base = static_cast<TShHandleBase*>(handle);
+    TranslatorHLSL* translator = base->getAsTranslatorHLSL();
+    if (!translator)
+    {
+        return false;
+    }
+
+    if (!translator->hasUniform(uniformName))
+    {
+        return false;
+    }
+
+    *indexOut = translator->getUniformRegister(uniformName);
+    return true;
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/ShaderVars.cpp b/src/3rdparty/angle/src/compiler/translator/ShaderVars.cpp
new file mode 100644
index 0000000000..822c558c9b
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/ShaderVars.cpp
@@ -0,0 +1,166 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// ShaderVars.cpp:
+//  Methods for GL variable types (varyings, uniforms, etc)
+//
+
+#include <GLSLANG/ShaderLang.h>
+
+namespace sh
+{
+
+ShaderVariable::ShaderVariable()
+    : type(0),
+      precision(0),
+      arraySize(0),
+      staticUse(false)
+{}
+
+ShaderVariable::ShaderVariable(GLenum typeIn, unsigned int arraySizeIn)
+    : type(typeIn),
+      precision(0),
+      arraySize(arraySizeIn),
+      staticUse(false)
+{}
+
+ShaderVariable::~ShaderVariable()
+{}
+
+ShaderVariable::ShaderVariable(const ShaderVariable &other)
+    : type(other.type),
+      precision(other.precision),
+      name(other.name),
+      mappedName(other.mappedName),
+      arraySize(other.arraySize),
+      staticUse(other.staticUse),
+      fields(other.fields),
+      structName(other.structName)
+{}
+
+ShaderVariable &ShaderVariable::operator=(const ShaderVariable &other)
+{
+    type = other.type;
+    precision = other.precision;
+    name = other.name;
+    mappedName = other.mappedName;
+    arraySize = other.arraySize;
+    staticUse = other.staticUse;
+    fields = other.fields;
+    structName = other.structName;
+    return *this;
+}
+
+Uniform::Uniform()
+{}
+
+Uniform::~Uniform()
+{}
+
+Uniform::Uniform(const Uniform &other)
+    : ShaderVariable(other)
+{}
+
+Uniform &Uniform::operator=(const Uniform &other)
+{
+    ShaderVariable::operator=(other);
+    return *this;
+}
+
+Attribute::Attribute()
+    : location(-1)
+{}
+
+Attribute::~Attribute()
+{}
+
+Attribute::Attribute(const Attribute &other)
+    : ShaderVariable(other),
+      location(other.location)
+{}
+
+Attribute &Attribute::operator=(const Attribute &other)
+{
+    ShaderVariable::operator=(other);
+    location = other.location;
+    return *this;
+}
+
+InterfaceBlockField::InterfaceBlockField()
+    : isRowMajorLayout(false)
+{}
+
+InterfaceBlockField::~InterfaceBlockField()
+{}
+
+InterfaceBlockField::InterfaceBlockField(const InterfaceBlockField &other)
+    : ShaderVariable(other),
+      isRowMajorLayout(other.isRowMajorLayout)
+{}
+
+InterfaceBlockField &InterfaceBlockField::operator=(const InterfaceBlockField &other)
+{
+    ShaderVariable::operator=(other);
+    isRowMajorLayout = other.isRowMajorLayout;
+    return *this;
+}
+
+Varying::Varying()
+    : interpolation(INTERPOLATION_SMOOTH),
+      isInvariant(false)
+{}
+
+Varying::~Varying()
+{}
+
+Varying::Varying(const Varying &other)
+    : ShaderVariable(other),
+      interpolation(other.interpolation),
+      isInvariant(other.isInvariant)
+{}
+
+Varying &Varying::operator=(const Varying &other)
+{
+    ShaderVariable::operator=(other);
+    interpolation = other.interpolation;
+    isInvariant = other.isInvariant;
+    return *this;
+}
+
+InterfaceBlock::InterfaceBlock()
+    : arraySize(0),
+      layout(BLOCKLAYOUT_PACKED),
+      isRowMajorLayout(false),
+      staticUse(false)
+{}
+
+InterfaceBlock::~InterfaceBlock()
+{}
+
+InterfaceBlock::InterfaceBlock(const InterfaceBlock &other)
+    : name(other.name),
+      mappedName(other.mappedName),
+      instanceName(other.instanceName),
+      arraySize(other.arraySize),
+      layout(other.layout),
+      isRowMajorLayout(other.isRowMajorLayout),
+      staticUse(other.staticUse),
+      fields(other.fields)
+{}
+
+InterfaceBlock &InterfaceBlock::operator=(const InterfaceBlock &other)
+{
+    name = other.name;
+    mappedName = other.mappedName;
+    instanceName = other.instanceName;
+    arraySize = other.arraySize;
+    layout = other.layout;
+    isRowMajorLayout = other.isRowMajorLayout;
+    staticUse = other.staticUse;
+    fields = other.fields;
+    return *this;
+}
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/StructureHLSL.cpp b/src/3rdparty/angle/src/compiler/translator/StructureHLSL.cpp
new file mode 100644
index 0000000000..48929affe6
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/StructureHLSL.cpp
@@ -0,0 +1,490 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// StructureHLSL.cpp:
+//   Definitions of methods for HLSL translation of GLSL structures.
+//
+
+#include "compiler/translator/StructureHLSL.h"
+#include "common/utilities.h"
+#include "compiler/translator/OutputHLSL.h"
+#include "compiler/translator/Types.h"
+#include "compiler/translator/util.h"
+#include "compiler/translator/UtilsHLSL.h"
+
+namespace sh
+{
+
+Std140PaddingHelper::Std140PaddingHelper(const std::map<TString, int> &structElementIndexes,
+                                         unsigned *uniqueCounter)
+    : mPaddingCounter(uniqueCounter),
+      mElementIndex(0),
+      mStructElementIndexes(structElementIndexes)
+{}
+
+TString Std140PaddingHelper::next()
+{
+    unsigned value = (*mPaddingCounter)++;
+    return str(value);
+}
+
+int Std140PaddingHelper::prePadding(const TType &type)
+{
+    if (type.getBasicType() == EbtStruct || type.isMatrix() || type.isArray())
+    {
+        // no padding needed, HLSL will align the field to a new register
+        mElementIndex = 0;
+        return 0;
+    }
+
+    const GLenum glType = GLVariableType(type);
+    const int numComponents = gl::VariableComponentCount(glType);
+
+    if (numComponents >= 4)
+    {
+        // no padding needed, HLSL will align the field to a new register
+        mElementIndex = 0;
+        return 0;
+    }
+
+    if (mElementIndex + numComponents > 4)
+    {
+        // no padding needed, HLSL will align the field to a new register
+        mElementIndex = numComponents;
+        return 0;
+    }
+
+    const int alignment = numComponents == 3 ? 4 : numComponents;
+    const int paddingOffset = (mElementIndex % alignment);
+    const int paddingCount = (paddingOffset != 0 ? (alignment - paddingOffset) : 0);
+
+    mElementIndex += paddingCount;
+    mElementIndex += numComponents;
+    mElementIndex %= 4;
+
+    return paddingCount;
+}
+
+TString Std140PaddingHelper::prePaddingString(const TType &type)
+{
+    int paddingCount = prePadding(type);
+
+    TString padding;
+
+    for (int paddingIndex = 0; paddingIndex < paddingCount; paddingIndex++)
+    {
+        padding += "    float pad_" + next() + ";\n";
+    }
+
+    return padding;
+}
+
+TString Std140PaddingHelper::postPaddingString(const TType &type, bool useHLSLRowMajorPacking)
+{
+    if (!type.isMatrix() && !type.isArray() && type.getBasicType() != EbtStruct)
+    {
+        return "";
+    }
+
+    int numComponents = 0;
+    TStructure *structure = type.getStruct();
+
+    if (type.isMatrix())
+    {
+        // This method can also be called from structureString, which does not use layout qualifiers.
+        // Thus, use the method parameter for determining the matrix packing.
+        //
+        // Note HLSL row major packing corresponds to GL API column-major, and vice-versa, since we
+        // wish to always transpose GL matrices to play well with HLSL's matrix array indexing.
+        //
+        const bool isRowMajorMatrix = !useHLSLRowMajorPacking;
+        const GLenum glType = GLVariableType(type);
+        numComponents = gl::MatrixComponentCount(glType, isRowMajorMatrix);
+    }
+    else if (structure)
+    {
+        const TString &structName = QualifiedStructNameString(*structure,
+                                                              useHLSLRowMajorPacking, true);
+        numComponents = mStructElementIndexes.find(structName)->second;
+
+        if (numComponents == 0)
+        {
+            return "";
+        }
+    }
+    else
+    {
+        const GLenum glType = GLVariableType(type);
+        numComponents = gl::VariableComponentCount(glType);
+    }
+
+    TString padding;
+    for (int paddingOffset = numComponents; paddingOffset < 4; paddingOffset++)
+    {
+        padding += "    float pad_" + next() + ";\n";
+    }
+    return padding;
+}
+
+StructureHLSL::StructureHLSL()
+    : mUniquePaddingCounter(0)
+{}
+
+Std140PaddingHelper StructureHLSL::getPaddingHelper()
+{
+    return Std140PaddingHelper(mStd140StructElementIndexes, &mUniquePaddingCounter);
+}
+
+TString StructureHLSL::defineQualified(const TStructure &structure, bool useHLSLRowMajorPacking, bool useStd140Packing)
+{
+    if (useStd140Packing)
+    {
+        Std140PaddingHelper padHelper = getPaddingHelper();
+        return define(structure, useHLSLRowMajorPacking, useStd140Packing, &padHelper);
+    }
+    else
+    {
+        return define(structure, useHLSLRowMajorPacking, useStd140Packing, NULL);
+    }
+}
+
+TString StructureHLSL::defineNameless(const TStructure &structure)
+{
+    return define(structure, false, false, NULL);
+}
+
+TString StructureHLSL::define(const TStructure &structure, bool useHLSLRowMajorPacking,
+                              bool useStd140Packing, Std140PaddingHelper *padHelper)
+{
+    const TFieldList &fields = structure.fields();
+    const bool isNameless = (structure.name() == "");
+    const TString &structName = QualifiedStructNameString(structure, useHLSLRowMajorPacking,
+                                                          useStd140Packing);
+    const TString declareString = (isNameless ? "struct" : "struct " + structName);
+
+    TString string;
+    string += declareString + "\n"
+              "{\n";
+
+    for (unsigned int i = 0; i < fields.size(); i++)
+    {
+        const TField &field = *fields[i];
+        const TType &fieldType = *field.type();
+        const TStructure *fieldStruct = fieldType.getStruct();
+        const TString &fieldTypeString = fieldStruct ?
+                                         QualifiedStructNameString(*fieldStruct, useHLSLRowMajorPacking,
+                                                                   useStd140Packing) :
+                                         TypeString(fieldType);
+
+        if (padHelper)
+        {
+            string += padHelper->prePaddingString(fieldType);
+        }
+
+        string += "    " + fieldTypeString + " " + DecorateField(field.name(), structure) + ArrayString(fieldType) + ";\n";
+
+        if (padHelper)
+        {
+            string += padHelper->postPaddingString(fieldType, useHLSLRowMajorPacking);
+        }
+    }
+
+    // Nameless structs do not finish with a semicolon and newline, to leave room for an instance variable
+    string += (isNameless ? "} " : "};\n");
+
+    return string;
+}
+
+void StructureHLSL::addConstructor(const TType &type, const TString &name, const TIntermSequence *parameters)
+{
+    if (name == "")
+    {
+        return;   // Nameless structures don't have constructors
+    }
+
+    if (type.getStruct() && mStructNames.find(name) != mStructNames.end())
+    {
+        return;   // Already added
+    }
+
+    TType ctorType = type;
+    ctorType.clearArrayness();
+    ctorType.setPrecision(EbpHigh);
+    ctorType.setQualifier(EvqTemporary);
+
+    typedef std::vector<TType> ParameterArray;
+    ParameterArray ctorParameters;
+
+    const TStructure* structure = type.getStruct();
+    if (structure)
+    {
+        mStructNames.insert(name);
+
+        // Add element index
+        storeStd140ElementIndex(*structure, false);
+        storeStd140ElementIndex(*structure, true);
+
+        const TString &structString = defineQualified(*structure, false, false);
+
+        if (std::find(mStructDeclarations.begin(), mStructDeclarations.end(), structString) == mStructDeclarations.end())
+        {
+            // Add row-major packed struct for interface blocks
+            TString rowMajorString = "#pragma pack_matrix(row_major)\n" +
+                defineQualified(*structure, true, false) +
+                "#pragma pack_matrix(column_major)\n";
+
+            TString std140String = defineQualified(*structure, false, true);
+            TString std140RowMajorString = "#pragma pack_matrix(row_major)\n" +
+                defineQualified(*structure, true, true) +
+                "#pragma pack_matrix(column_major)\n";
+
+            mStructDeclarations.push_back(structString);
+            mStructDeclarations.push_back(rowMajorString);
+            mStructDeclarations.push_back(std140String);
+            mStructDeclarations.push_back(std140RowMajorString);
+        }
+
+        const TFieldList &fields = structure->fields();
+        for (unsigned int i = 0; i < fields.size(); i++)
+        {
+            ctorParameters.push_back(*fields[i]->type());
+        }
+    }
+    else if (parameters)
+    {
+        for (TIntermSequence::const_iterator parameter = parameters->begin(); parameter != parameters->end(); parameter++)
+        {
+            ctorParameters.push_back((*parameter)->getAsTyped()->getType());
+        }
+    }
+    else UNREACHABLE();
+
+    TString constructor;
+
+    if (ctorType.getStruct())
+    {
+        constructor += name + " " + name + "_ctor(";
+    }
+    else   // Built-in type
+    {
+        constructor += TypeString(ctorType) + " " + name + "(";
+    }
+
+    for (unsigned int parameter = 0; parameter < ctorParameters.size(); parameter++)
+    {
+        const TType &type = ctorParameters[parameter];
+
+        constructor += TypeString(type) + " x" + str(parameter) + ArrayString(type);
+
+        if (parameter < ctorParameters.size() - 1)
+        {
+            constructor += ", ";
+        }
+    }
+
+    constructor += ")\n"
+                   "{\n";
+
+    if (ctorType.getStruct())
+    {
+        constructor += "    " + name + " structure = {";
+    }
+    else
+    {
+        constructor += "    return " + TypeString(ctorType) + "(";
+    }
+
+    if (ctorType.isMatrix() && ctorParameters.size() == 1)
+    {
+        int rows = ctorType.getRows();
+        int cols = ctorType.getCols();
+        const TType &parameter = ctorParameters[0];
+
+        if (parameter.isScalar())
+        {
+            for (int col = 0; col < cols; col++)
+            {
+                for (int row = 0; row < rows; row++)
+                {
+                    constructor += TString((row == col) ? "x0" : "0.0");
+
+                    if (row < rows - 1 || col < cols - 1)
+                    {
+                        constructor += ", ";
+                    }
+                }
+            }
+        }
+        else if (parameter.isMatrix())
+        {
+            for (int col = 0; col < cols; col++)
+            {
+                for (int row = 0; row < rows; row++)
+                {
+                    if (row < parameter.getRows() && col < parameter.getCols())
+                    {
+                        constructor += TString("x0") + "[" + str(col) + "][" + str(row) + "]";
+                    }
+                    else
+                    {
+                        constructor += TString((row == col) ? "1.0" : "0.0");
+                    }
+
+                    if (row < rows - 1 || col < cols - 1)
+                    {
+                        constructor += ", ";
+                    }
+                }
+            }
+        }
+        else
+        {
+            ASSERT(rows == 2 && cols == 2 && parameter.isVector() && parameter.getNominalSize() == 4);
+
+            constructor += "x0";
+        }
+    }
+    else
+    {
+        size_t remainingComponents = ctorType.getObjectSize();
+        size_t parameterIndex = 0;
+
+        while (remainingComponents > 0)
+        {
+            const TType &parameter = ctorParameters[parameterIndex];
+            const size_t parameterSize = parameter.getObjectSize();
+            bool moreParameters = parameterIndex + 1 < ctorParameters.size();
+
+            constructor += "x" + str(parameterIndex);
+
+            if (ctorType.getStruct())
+            {
+                ASSERT(remainingComponents == parameterSize || moreParameters);
+                ASSERT(parameterSize <= remainingComponents);
+
+                remainingComponents -= parameterSize;
+            }
+            else if (parameter.isScalar())
+            {
+                remainingComponents -= parameter.getObjectSize();
+            }
+            else if (parameter.isVector())
+            {
+                if (remainingComponents == parameterSize || moreParameters)
+                {
+                    ASSERT(parameterSize <= remainingComponents);
+                    remainingComponents -= parameterSize;
+                }
+                else if (remainingComponents < static_cast<size_t>(parameter.getNominalSize()))
+                {
+                    switch (remainingComponents)
+                    {
+                      case 1: constructor += ".x";    break;
+                      case 2: constructor += ".xy";   break;
+                      case 3: constructor += ".xyz";  break;
+                      case 4: constructor += ".xyzw"; break;
+                      default: UNREACHABLE();
+                    }
+
+                    remainingComponents = 0;
+                }
+                else UNREACHABLE();
+            }
+            else if (parameter.isMatrix())
+            {
+                int column = 0;
+                while (remainingComponents > 0 && column < parameter.getCols())
+                {
+                    constructor += "[" + str(column) + "]";
+
+                    if (remainingComponents < static_cast<size_t>(parameter.getRows()))
+                    {
+                        switch (remainingComponents)
+                        {
+                          case 1:  constructor += ".x";    break;
+                          case 2:  constructor += ".xy";   break;
+                          case 3:  constructor += ".xyz";  break;
+                          default: UNREACHABLE();
+                        }
+
+                        remainingComponents = 0;
+                    }
+                    else
+                    {
+                        remainingComponents -= parameter.getRows();
+
+                        if (remainingComponents > 0)
+                        {
+                            constructor += ", x" + str(parameterIndex);
+                        }
+                    }
+
+                    column++;
+                }
+            }
+            else UNREACHABLE();
+
+            if (moreParameters)
+            {
+                parameterIndex++;
+            }
+
+            if (remainingComponents)
+            {
+                constructor += ", ";
+            }
+        }
+    }
+
+    if (ctorType.getStruct())
+    {
+        constructor += "};\n"
+                        "    return structure;\n"
+                        "}\n";
+    }
+    else
+    {
+        constructor += ");\n"
+                       "}\n";
+    }
+
+    mConstructors.insert(constructor);
+}
+
+std::string StructureHLSL::structsHeader() const
+{
+    TInfoSinkBase out;
+
+    for (size_t structIndex = 0; structIndex < mStructDeclarations.size(); structIndex++)
+    {
+        out << mStructDeclarations[structIndex];
+    }
+
+    for (Constructors::const_iterator constructor = mConstructors.begin();
+         constructor != mConstructors.end();
+         constructor++)
+    {
+        out << *constructor;
+    }
+
+    return out.str();
+}
+
+void StructureHLSL::storeStd140ElementIndex(const TStructure &structure, bool useHLSLRowMajorPacking)
+{
+    Std140PaddingHelper padHelper = getPaddingHelper();
+    const TFieldList &fields = structure.fields();
+
+    for (unsigned int i = 0; i < fields.size(); i++)
+    {
+        padHelper.prePadding(*fields[i]->type());
+    }
+
+    // Add remaining element index to the global map, for use with nested structs in standard layouts
+    const TString &structName = QualifiedStructNameString(structure, useHLSLRowMajorPacking, true);
+    mStd140StructElementIndexes[structName] = padHelper.elementIndex();
+}
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/StructureHLSL.h b/src/3rdparty/angle/src/compiler/translator/StructureHLSL.h
new file mode 100644
index 0000000000..ed002fef30
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/StructureHLSL.h
@@ -0,0 +1,79 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// StructureHLSL.h:
+//   Interfaces of methods for HLSL translation of GLSL structures.
+//
+
+#ifndef TRANSLATOR_STRUCTUREHLSL_H_
+#define TRANSLATOR_STRUCTUREHLSL_H_
+
+#include "compiler/translator/Common.h"
+#include "compiler/translator/IntermNode.h"
+
+#include <set>
+
+class TInfoSinkBase;
+class TScopeBracket;
+
+namespace sh
+{
+
+// This helper class assists structure and interface block definitions in determining
+// how to pack std140 structs within HLSL's packing rules.
+class Std140PaddingHelper
+{
+  public:
+    explicit Std140PaddingHelper(const std::map<TString, int> &structElementIndexes,
+                                 unsigned *uniqueCounter);
+
+    int elementIndex() const { return mElementIndex; }
+    int prePadding(const TType &type);
+    TString prePaddingString(const TType &type);
+    TString postPaddingString(const TType &type, bool useHLSLRowMajorPacking);
+
+  private:
+    TString next();
+
+    unsigned *mPaddingCounter;
+    int mElementIndex;
+    const std::map<TString, int> &mStructElementIndexes;
+};
+
+class StructureHLSL
+{
+  public:
+    StructureHLSL();
+
+    void addConstructor(const TType &type, const TString &name, const TIntermSequence *parameters);
+    std::string structsHeader() const;
+
+    TString defineQualified(const TStructure &structure, bool useHLSLRowMajorPacking, bool useStd140Packing);
+    static TString defineNameless(const TStructure &structure);
+
+    Std140PaddingHelper getPaddingHelper();
+
+  private:
+    unsigned mUniquePaddingCounter;
+
+    std::map<TString, int> mStd140StructElementIndexes;
+
+    typedef std::set<TString> StructNames;
+    StructNames mStructNames;
+
+    typedef std::set<TString> Constructors;
+    Constructors mConstructors;
+
+    typedef std::vector<TString> StructDeclarations;
+    StructDeclarations mStructDeclarations;
+
+    void storeStd140ElementIndex(const TStructure &structure, bool useHLSLRowMajorPacking);
+    static TString define(const TStructure &structure, bool useHLSLRowMajorPacking,
+                         bool useStd140Packing, Std140PaddingHelper *padHelper);
+};
+
+}
+
+#endif // COMPILER_STRUCTUREHLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/SymbolTable.cpp b/src/3rdparty/angle/src/compiler/translator/SymbolTable.cpp
index d04fe5d355..028da21151 100644
--- a/src/3rdparty/angle/src/compiler/translator/SymbolTable.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/SymbolTable.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -17,200 +17,222 @@
 
 #include <stdio.h>
 #include <algorithm>
-#include <climits>
 
-TType::TType(const TPublicType &p) :
-            type(p.type), precision(p.precision), qualifier(p.qualifier), size(p.size), matrix(p.matrix), array(p.array), arraySize(p.arraySize), structure(0)
+int TSymbolTable::uniqueIdCounter = 0;
+
+//
+// Functions have buried pointers to delete.
+//
+TFunction::~TFunction()
 {
-    if (p.userDef)
-        structure = p.userDef->getStruct();
+    for (TParamList::iterator i = parameters.begin(); i != parameters.end(); ++i)
+        delete (*i).type;
 }
 
 //
-// Recursively generate mangled names.
+// Symbol table levels are a map of pointers to symbols that have to be deleted.
 //
-TString TType::buildMangledName() const
+TSymbolTableLevel::~TSymbolTableLevel()
 {
-    TString mangledName;
-    if (isMatrix())
-        mangledName += 'm';
-    else if (isVector())
-        mangledName += 'v';
-
-    switch (type) {
-    case EbtFloat:       mangledName += 'f';      break;
-    case EbtInt:         mangledName += 'i';      break;
-    case EbtBool:        mangledName += 'b';      break;
-    case EbtSampler2D:   mangledName += "s2";     break;
-    case EbtSamplerCube: mangledName += "sC";     break;
-    case EbtStruct:      mangledName += structure->mangledName(); break;
-    default:             break;
-    }
-
-    mangledName += static_cast<char>('0' + getNominalSize());
-    if (isArray()) {
-        char buf[20];
-        snprintf(buf, sizeof(buf), "%d", arraySize);
-        mangledName += '[';
-        mangledName += buf;
-        mangledName += ']';
-    }
-    return mangledName;
+    for (tLevel::iterator it = level.begin(); it != level.end(); ++it)
+        delete (*it).second;
 }
 
-size_t TType::getObjectSize() const
+bool TSymbolTableLevel::insert(TSymbol *symbol)
 {
-    size_t totalSize = 0;
+    symbol->setUniqueId(TSymbolTable::nextUniqueId());
 
-    if (getBasicType() == EbtStruct)
-        totalSize = structure->objectSize();
-    else if (matrix)
-        totalSize = size * size;
-    else
-        totalSize = size;
-
-    if (isArray()) {
-        size_t arraySize = getArraySize();
-        if (arraySize > INT_MAX / totalSize)
-            totalSize = INT_MAX;
-        else
-            totalSize *= arraySize;
-    }
+    // returning true means symbol was added to the table
+    tInsertResult result = level.insert(tLevelPair(symbol->getMangledName(), symbol));
 
-    return totalSize;
+    return result.second;
 }
 
-bool TStructure::containsArrays() const
+TSymbol *TSymbolTableLevel::find(const TString &name) const
 {
-    for (size_t i = 0; i < mFields->size(); ++i) {
-        const TType* fieldType = (*mFields)[i]->type();
-        if (fieldType->isArray() || fieldType->isStructureContainingArrays())
-            return true;
-    }
-    return false;
+    tLevel::const_iterator it = level.find(name);
+    if (it == level.end())
+        return 0;
+    else
+        return (*it).second;
 }
 
-TString TStructure::buildMangledName() const
+//
+// Change all function entries in the table with the non-mangled name
+// to be related to the provided built-in operation.  This is a low
+// performance operation, and only intended for symbol tables that
+// live across a large number of compiles.
+//
+void TSymbolTableLevel::relateToOperator(const char *name, TOperator op)
 {
-    TString mangledName("struct-");
-    mangledName += *mName;
-    for (size_t i = 0; i < mFields->size(); ++i) {
-        mangledName += '-';
-        mangledName += (*mFields)[i]->type()->getMangledName();
+    for (tLevel::iterator it = level.begin(); it != level.end(); ++it)
+    {
+        if ((*it).second->isFunction())
+        {
+            TFunction *function = static_cast<TFunction*>((*it).second);
+            if (function->getName() == name)
+                function->relateToOperator(op);
+        }
     }
-    return mangledName;
 }
 
-size_t TStructure::calculateObjectSize() const
+//
+// Change all function entries in the table with the non-mangled name
+// to be related to the provided built-in extension. This is a low
+// performance operation, and only intended for symbol tables that
+// live across a large number of compiles.
+//
+void TSymbolTableLevel::relateToExtension(const char *name, const TString &ext)
 {
-    size_t size = 0;
-    for (size_t i = 0; i < mFields->size(); ++i) {
-        size_t fieldSize = (*mFields)[i]->type()->getObjectSize();
-        if (fieldSize > INT_MAX - size)
-            size = INT_MAX;
-        else
-            size += fieldSize;
+    for (tLevel::iterator it = level.begin(); it != level.end(); ++it)
+    {
+        TSymbol *symbol = it->second;
+        if (symbol->getName() == name)
+            symbol->relateToExtension(ext);
     }
-    return size;
 }
 
-int TStructure::calculateDeepestNesting() const
+TSymbol::TSymbol(const TSymbol &copyOf)
 {
-    int maxNesting = 0;
-    for (size_t i = 0; i < mFields->size(); ++i) {
-        maxNesting = std::max(maxNesting, (*mFields)[i]->type()->getDeepestStructNesting());
-    }
-    return 1 + maxNesting;
+    name = NewPoolTString(copyOf.name->c_str());
+    uniqueId = copyOf.uniqueId;
 }
 
-//
-// Dump functions.
-//
-
-void TVariable::dump(TInfoSink& infoSink) const
+TSymbol *TSymbolTable::find(const TString &name, int shaderVersion,
+                            bool *builtIn, bool *sameScope) const
 {
-    infoSink.debug << getName().c_str() << ": " << type.getQualifierString() << " " << type.getPrecisionString() << " " << type.getBasicString();
-    if (type.isArray()) {
-        infoSink.debug << "[0]";
+    int level = currentLevel();
+    TSymbol *symbol;
+
+    do
+    {
+        if (level == ESSL3_BUILTINS && shaderVersion != 300)
+            level--;
+        if (level == ESSL1_BUILTINS && shaderVersion != 100)
+            level--;
+
+        symbol = table[level]->find(name);
     }
-    infoSink.debug << "\n";
-}
+    while (symbol == 0 && --level >= 0);
 
-void TFunction::dump(TInfoSink &infoSink) const
-{
-    infoSink.debug << getName().c_str() << ": " <<  returnType.getBasicString() << " " << getMangledName().c_str() << "\n";
-}
+    if (builtIn)
+        *builtIn = (level <= LAST_BUILTIN_LEVEL);
+    if (sameScope)
+        *sameScope = (level == currentLevel());
 
-void TSymbolTableLevel::dump(TInfoSink &infoSink) const
-{
-    tLevel::const_iterator it;
-    for (it = level.begin(); it != level.end(); ++it)
-        (*it).second->dump(infoSink);
+    return symbol;
 }
 
-void TSymbolTable::dump(TInfoSink &infoSink) const
+TSymbol *TSymbolTable::findBuiltIn(
+    const TString &name, int shaderVersion) const
 {
-    for (int level = currentLevel(); level >= 0; --level) {
-        infoSink.debug << "LEVEL " << level << "\n";
-        table[level]->dump(infoSink);
+    for (int level = LAST_BUILTIN_LEVEL; level >= 0; level--)
+    {
+        if (level == ESSL3_BUILTINS && shaderVersion != 300)
+            level--;
+        if (level == ESSL1_BUILTINS && shaderVersion != 100)
+            level--;
+
+        TSymbol *symbol = table[level]->find(name);
+
+        if (symbol)
+            return symbol;
     }
-}
 
-//
-// Functions have buried pointers to delete.
-//
-TFunction::~TFunction()
-{
-    for (TParamList::iterator i = parameters.begin(); i != parameters.end(); ++i)
-        delete (*i).type;
+    return 0;
 }
 
-//
-// Symbol table levels are a map of pointers to symbols that have to be deleted.
-//
-TSymbolTableLevel::~TSymbolTableLevel()
+TSymbolTable::~TSymbolTable()
 {
-    for (tLevel::iterator it = level.begin(); it != level.end(); ++it)
-        delete (*it).second;
+    while (table.size() > 0)
+        pop();
 }
 
-//
-// Change all function entries in the table with the non-mangled name
-// to be related to the provided built-in operation.  This is a low
-// performance operation, and only intended for symbol tables that
-// live across a large number of compiles.
-//
-void TSymbolTableLevel::relateToOperator(const char* name, TOperator op)
+void TSymbolTable::insertBuiltIn(
+    ESymbolLevel level, TType *rvalue, const char *name,
+    TType *ptype1, TType *ptype2, TType *ptype3, TType *ptype4, TType *ptype5)
 {
-    tLevel::iterator it;
-    for (it = level.begin(); it != level.end(); ++it) {
-        if ((*it).second->isFunction()) {
-            TFunction* function = static_cast<TFunction*>((*it).second);
-            if (function->getName() == name)
-                function->relateToOperator(op);
-        }
+    if (ptype1->getBasicType() == EbtGSampler2D)
+    {
+        bool gvec4 = (rvalue->getBasicType() == EbtGVec4);
+        insertBuiltIn(level, gvec4 ? new TType(EbtFloat, 4) : rvalue, name,
+                      new TType(EbtSampler2D), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtInt, 4) : rvalue, name,
+                      new TType(EbtISampler2D), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtUInt, 4) : rvalue, name,
+                      new TType(EbtUSampler2D), ptype2, ptype3, ptype4, ptype5);
+        return;
+    }
+    if (ptype1->getBasicType() == EbtGSampler3D)
+    {
+        bool gvec4 = (rvalue->getBasicType() == EbtGVec4);
+        insertBuiltIn(level, gvec4 ? new TType(EbtFloat, 4) : rvalue, name,
+                      new TType(EbtSampler3D), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtInt, 4) : rvalue, name,
+                      new TType(EbtISampler3D), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtUInt, 4) : rvalue, name,
+                      new TType(EbtUSampler3D), ptype2, ptype3, ptype4, ptype5);
+        return;
+    }
+    if (ptype1->getBasicType() == EbtGSamplerCube)
+    {
+        bool gvec4 = (rvalue->getBasicType() == EbtGVec4);
+        insertBuiltIn(level, gvec4 ? new TType(EbtFloat, 4) : rvalue, name,
+                      new TType(EbtSamplerCube), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtInt, 4) : rvalue, name,
+                      new TType(EbtISamplerCube), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtUInt, 4) : rvalue, name,
+                      new TType(EbtUSamplerCube), ptype2, ptype3, ptype4, ptype5);
+        return;
+    }
+    if (ptype1->getBasicType() == EbtGSampler2DArray)
+    {
+        bool gvec4 = (rvalue->getBasicType() == EbtGVec4);
+        insertBuiltIn(level, gvec4 ? new TType(EbtFloat, 4) : rvalue, name,
+                      new TType(EbtSampler2DArray), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtInt, 4) : rvalue, name,
+                      new TType(EbtISampler2DArray), ptype2, ptype3, ptype4, ptype5);
+        insertBuiltIn(level, gvec4 ? new TType(EbtUInt, 4) : rvalue, name,
+                      new TType(EbtUSampler2DArray), ptype2, ptype3, ptype4, ptype5);
+        return;
     }
-}
 
-//
-// Change all function entries in the table with the non-mangled name
-// to be related to the provided built-in extension. This is a low
-// performance operation, and only intended for symbol tables that
-// live across a large number of compiles.
-//
-void TSymbolTableLevel::relateToExtension(const char* name, const TString& ext)
-{
-    for (tLevel::iterator it = level.begin(); it != level.end(); ++it) {
-        TSymbol* symbol = it->second;
-        if (symbol->getName() == name)
-            symbol->relateToExtension(ext);
+    TFunction *function = new TFunction(NewPoolTString(name), *rvalue);
+
+    TType *types[] = {ptype1, ptype2, ptype3, ptype4, ptype5};
+    for (size_t ii = 0; ii < sizeof(types) / sizeof(types[0]); ++ii)
+    {
+        if (types[ii])
+        {
+            TParameter param = {NULL, types[ii]};
+            function->addParameter(param);
+        }
     }
+
+    insert(level, function);
 }
 
-TSymbolTable::~TSymbolTable()
+TPrecision TSymbolTable::getDefaultPrecision(TBasicType type) const
 {
-    for (size_t i = 0; i < table.size(); ++i)
-        delete table[i];
-    for (size_t i = 0; i < precisionStack.size(); ++i)
-        delete precisionStack[i];
+    if (!SupportsPrecision(type))
+        return EbpUndefined;
+
+    // unsigned integers use the same precision as signed
+    TBasicType baseType = (type == EbtUInt) ? EbtInt : type;
+
+    int level = static_cast<int>(precisionStack.size()) - 1;
+    assert(level >= 0); // Just to be safe. Should not happen.
+    // If we dont find anything we return this. Should we error check this?
+    TPrecision prec = EbpUndefined;
+    while (level >= 0)
+    {
+        PrecisionStackLevel::iterator it = precisionStack[level]->find(baseType);
+        if (it != precisionStack[level]->end())
+        {
+            prec = (*it).second;
+            break;
+        }
+        level--;
+    }
+    return prec;
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/SymbolTable.h b/src/3rdparty/angle/src/compiler/translator/SymbolTable.h
index 6c7211f2a9..6b0e0c0a03 100644
--- a/src/3rdparty/angle/src/compiler/translator/SymbolTable.h
+++ b/src/3rdparty/angle/src/compiler/translator/SymbolTable.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -34,36 +34,64 @@
 
 #include "common/angleutils.h"
 #include "compiler/translator/InfoSink.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
-//
-// Symbol base class.  (Can build functions or variables out of these...)
-//
-class TSymbol {    
-public:
+// Symbol base class. (Can build functions or variables out of these...)
+class TSymbol
+{
+  public:
     POOL_ALLOCATOR_NEW_DELETE();
-    TSymbol(const TString* n) :  uniqueId(0), name(n) { }
-    virtual ~TSymbol() { /* don't delete name, it's from the pool */ }
-
-    const TString& getName() const { return *name; }
-    virtual const TString& getMangledName() const { return getName(); }
-    virtual bool isFunction() const { return false; }
-    virtual bool isVariable() const { return false; }
-    void setUniqueId(int id) { uniqueId = id; }
-    int getUniqueId() const { return uniqueId; }
-    virtual void dump(TInfoSink &infoSink) const = 0;
-    void relateToExtension(const TString& ext) { extension = ext; }
-    const TString& getExtension() const { return extension; }
-
-private:
+    TSymbol(const TString *n)
+        : uniqueId(0),
+          name(n)
+    {
+    }
+    virtual ~TSymbol()
+    {
+        // don't delete name, it's from the pool
+    }
+
+    const TString &getName() const
+    {
+        return *name;
+    }
+    virtual const TString &getMangledName() const
+    {
+        return getName();
+    }
+    virtual bool isFunction() const
+    {
+        return false;
+    }
+    virtual bool isVariable() const
+    {
+        return false;
+    }
+    void setUniqueId(int id)
+    {
+        uniqueId = id;
+    }
+    int getUniqueId() const
+    {
+        return uniqueId;
+    }
+    void relateToExtension(const TString &ext)
+    {
+        extension = ext;
+    }
+    const TString &getExtension() const
+    {
+        return extension;
+    }
+
+  private:
     DISALLOW_COPY_AND_ASSIGN(TSymbol);
 
-    int uniqueId;      // For real comparing during code generation
+    int uniqueId; // For real comparing during code generation
     const TString *name;
     TString extension;
 };
 
-//
 // Variable class, meaning a symbol that's not a function.
 // 
 // There could be a separate class heirarchy for Constant variables;
@@ -72,20 +100,41 @@ private:
 // seem worth having separate classes, and "getConst" can't simply return
 // different values for different types polymorphically, so this is 
 // just simple and pragmatic.
-//
-class TVariable : public TSymbol {
-public:
-    TVariable(const TString *name, const TType& t, bool uT = false ) : TSymbol(name), type(t), userType(uT), unionArray(0) { }
-    virtual ~TVariable() { }
-    virtual bool isVariable() const { return true; }    
-    TType& getType() { return type; }    
-    const TType& getType() const { return type; }
-    bool isUserType() const { return userType; }
-    void setQualifier(TQualifier qualifier) { type.setQualifier(qualifier); }
-
-    virtual void dump(TInfoSink &infoSink) const;
-
-    ConstantUnion* getConstPointer()
+class TVariable : public TSymbol
+{
+  public:
+    TVariable(const TString *name, const TType &t, bool uT = false)
+        : TSymbol(name),
+          type(t),
+          userType(uT),
+          unionArray(0)
+    {
+    }
+    virtual ~TVariable()
+    {
+    }
+    virtual bool isVariable() const
+    {
+        return true;
+    }
+    TType &getType()
+    {
+        return type;
+    }
+    const TType &getType() const
+    {
+        return type;
+    }
+    bool isUserType() const
+    {
+        return userType;
+    }
+    void setQualifier(TQualifier qualifier)
+    {
+        type.setQualifier(qualifier);
+    }
+
+    ConstantUnion *getConstPointer()
     { 
         if (!unionArray)
             unionArray = new ConstantUnion[type.getObjectSize()];
@@ -93,9 +142,12 @@ public:
         return unionArray;
     }
 
-    ConstantUnion* getConstPointer() const { return unionArray; }
+    ConstantUnion *getConstPointer() const
+    {
+        return unionArray;
+    }
 
-    void shareConstPointer( ConstantUnion *constArray)
+    void shareConstPointer(ConstantUnion *constArray)
     {
         if (unionArray == constArray)
             return;
@@ -104,71 +156,101 @@ public:
         unionArray = constArray;  
     }
 
-private:
+  private:
     DISALLOW_COPY_AND_ASSIGN(TVariable);
 
     TType type;
     bool userType;
-    // we are assuming that Pool Allocator will free the memory allocated to unionArray
-    // when this object is destroyed
+    // we are assuming that Pool Allocator will free the memory
+    // allocated to unionArray when this object is destroyed.
     ConstantUnion *unionArray;
 };
 
-//
 // The function sub-class of symbols and the parser will need to
 // share this definition of a function parameter.
-//
-struct TParameter {
+struct TParameter
+{
     TString *name;
-    TType* type;
+    TType *type;
 };
 
-//
 // The function sub-class of a symbol.  
-//
-class TFunction : public TSymbol {
-public:
-    TFunction(TOperator o) :
-        TSymbol(0),
-        returnType(TType(EbtVoid, EbpUndefined)),
-        op(o),
-        defined(false) { }
-    TFunction(const TString *name, TType& retType, TOperator tOp = EOpNull) : 
-        TSymbol(name), 
-        returnType(retType),
-        mangledName(TFunction::mangleName(*name)),
-        op(tOp),
-        defined(false) { }
+class TFunction : public TSymbol
+{
+  public:
+    TFunction(TOperator o)
+        : TSymbol(0),
+          returnType(TType(EbtVoid, EbpUndefined)),
+          op(o),
+          defined(false)
+    {
+    }
+    TFunction(const TString *name, const TType &retType, TOperator tOp = EOpNull)
+        : TSymbol(name),
+          returnType(retType),
+          mangledName(TFunction::mangleName(*name)),
+          op(tOp),
+          defined(false)
+    {
+    }
     virtual ~TFunction();
-    virtual bool isFunction() const { return true; }    
+    virtual bool isFunction() const
+    {
+        return true;
+    }
 
-    static TString mangleName(const TString& name) { return name + '('; }
-    static TString unmangleName(const TString& mangledName)
+    static TString mangleName(const TString &name)
+    {
+        return name + '(';
+    }
+    static TString unmangleName(const TString &mangledName)
     {
         return TString(mangledName.c_str(), mangledName.find_first_of('('));
     }
 
-    void addParameter(TParameter& p) 
+    void addParameter(TParameter &p)
     { 
         parameters.push_back(p);
         mangledName = mangledName + p.type->getMangledName();
     }
 
-    const TString& getMangledName() const { return mangledName; }
-    const TType& getReturnType() const { return returnType; }
-
-    void relateToOperator(TOperator o) { op = o; }
-    TOperator getBuiltInOp() const { return op; }
+    const TString &getMangledName() const
+    {
+        return mangledName;
+    }
+    const TType &getReturnType() const
+    {
+        return returnType;
+    }
 
-    void setDefined() { defined = true; }
-    bool isDefined() { return defined; }
+    void relateToOperator(TOperator o)
+    {
+        op = o;
+    }
+    TOperator getBuiltInOp() const
+    {
+        return op;
+    }
 
-    size_t getParamCount() const { return parameters.size(); }  
-    const TParameter& getParam(size_t i) const { return parameters[i]; }
+    void setDefined()
+    {
+        defined = true;
+    }
+    bool isDefined()
+    {
+        return defined;
+    }
 
-    virtual void dump(TInfoSink &infoSink) const;
+    size_t getParamCount() const
+    {
+        return parameters.size();
+    }
+    const TParameter &getParam(size_t i) const
+    {
+        return parameters[i];
+    }
 
-private:
+  private:
     DISALLOW_COPY_AND_ASSIGN(TFunction);
 
     typedef TVector<TParameter> TParamList;
@@ -179,79 +261,80 @@ private:
     bool defined;
 };
 
-
-class TSymbolTableLevel {
-public:
-    typedef TMap<TString, TSymbol*> tLevel;
-    typedef tLevel::const_iterator const_iterator;
-    typedef const tLevel::value_type tLevelPair;
-    typedef std::pair<tLevel::iterator, bool> tInsertResult;
-
-    TSymbolTableLevel() { }
-    ~TSymbolTableLevel();
-
-    bool insert(const TString &name, TSymbol &symbol)
+// Interface block name sub-symbol
+class TInterfaceBlockName : public TSymbol
+{
+  public:
+    TInterfaceBlockName(const TString *name)
+        : TSymbol(name)
     {
-        //
-        // returning true means symbol was added to the table
-        //
-        tInsertResult result = level.insert(tLevelPair(name, &symbol));
-
-        return result.second;
     }
 
-    bool insert(TSymbol &symbol)
+    virtual ~TInterfaceBlockName()
     {
-        return insert(symbol.getMangledName(), symbol);
     }
+};
 
-    TSymbol* find(const TString& name) const
-    {
-        tLevel::const_iterator it = level.find(name);
-        if (it == level.end())
-            return 0;
-        else
-            return (*it).second;
-    }
+class TSymbolTableLevel
+{
+  public:
+    typedef TMap<TString, TSymbol *> tLevel;
+    typedef tLevel::const_iterator const_iterator;
+    typedef const tLevel::value_type tLevelPair;
+    typedef std::pair<tLevel::iterator, bool> tInsertResult;
 
-    const_iterator begin() const
+    TSymbolTableLevel()
     {
-        return level.begin();
     }
+    ~TSymbolTableLevel();
 
-    const_iterator end() const
-    {
-        return level.end();
-    }
+    bool insert(TSymbol *symbol);
 
-    void relateToOperator(const char* name, TOperator op);
-    void relateToExtension(const char* name, const TString& ext);
-    void dump(TInfoSink &infoSink) const;
+    TSymbol *find(const TString &name) const;
 
-protected:
+    void relateToOperator(const char *name, TOperator op);
+    void relateToExtension(const char *name, const TString &ext);
+
+  protected:
     tLevel level;
 };
 
-class TSymbolTable {
-public:
-    TSymbolTable() : uniqueId(0)
+enum ESymbolLevel
+{
+    COMMON_BUILTINS = 0,
+    ESSL1_BUILTINS = 1,
+    ESSL3_BUILTINS = 2,
+    LAST_BUILTIN_LEVEL = ESSL3_BUILTINS,
+    GLOBAL_LEVEL = 3
+};
+
+class TSymbolTable
+{
+  public:
+    TSymbolTable()
     {
-        //
         // The symbol table cannot be used until push() is called, but
         // the lack of an initial call to push() can be used to detect
         // that the symbol table has not been preloaded with built-ins.
-        //
     }
+
     ~TSymbolTable();
 
-    //
     // When the symbol table is initialized with the built-ins, there should
     // 'push' calls, so that built-ins are at level 0 and the shader
     // globals are at level 1.
-    //
-    bool isEmpty() { return table.size() == 0; }
-    bool atBuiltInLevel() { return table.size() == 1; }
-    bool atGlobalLevel() { return table.size() <= 2; }
+    bool isEmpty() const
+    {
+        return table.empty();
+    }
+    bool atBuiltInLevel() const
+    {
+        return currentLevel() <= LAST_BUILTIN_LEVEL;
+    }
+    bool atGlobalLevel() const
+    {
+        return currentLevel() <= GLOBAL_LEVEL;
+    }
     void push()
     {
         table.push_back(new TSymbolTableLevel);
@@ -267,116 +350,80 @@ public:
         precisionStack.pop_back();
     }
 
-    bool insert(TSymbol& symbol)
+    bool declare(TSymbol *symbol)
     {
-        symbol.setUniqueId(++uniqueId);
-        return table[currentLevel()]->insert(symbol);
+        return insert(currentLevel(), symbol);
     }
 
-    bool insertConstInt(const char *name, int value)
+    bool insert(ESymbolLevel level, TSymbol *symbol)
     {
-        TVariable *constant = new TVariable(NewPoolTString(name), TType(EbtInt, EbpUndefined, EvqConst, 1));
-        constant->getConstPointer()->setIConst(value);
-        return insert(*constant);
+        return table[level]->insert(symbol);
     }
 
-    bool insertBuiltIn(TType *rvalue, const char *name, TType *ptype1, TType *ptype2 = 0, TType *ptype3 = 0)
+    bool insertConstInt(ESymbolLevel level, const char *name, int value)
     {
-        TFunction *function = new TFunction(NewPoolTString(name), *rvalue);
-
-        TParameter param1 = {NULL, ptype1};
-        function->addParameter(param1);
-
-        if(ptype2)
-        {
-            TParameter param2 = {NULL, ptype2};
-            function->addParameter(param2);
-        }
-
-        if(ptype3)
-        {
-            TParameter param3 = {NULL, ptype3};
-            function->addParameter(param3);
-        }
-
-        return insert(*function);
+        TVariable *constant = new TVariable(
+            NewPoolTString(name), TType(EbtInt, EbpUndefined, EvqConst, 1));
+        constant->getConstPointer()->setIConst(value);
+        return insert(level, constant);
     }
 
-    TSymbol* find(const TString& name, bool* builtIn = 0, bool *sameScope = 0) 
-    {
-        int level = currentLevel();
-        TSymbol* symbol;
-        do {
-            symbol = table[level]->find(name);
-            --level;
-        } while (symbol == 0 && level >= 0);
-        level++;
-        if (builtIn)
-            *builtIn = level == 0;
-        if (sameScope)
-            *sameScope = level == currentLevel();
-        return symbol;
-    }
+    void insertBuiltIn(ESymbolLevel level, TType *rvalue, const char *name,
+                       TType *ptype1, TType *ptype2 = 0, TType *ptype3 = 0,
+                       TType *ptype4 = 0, TType *ptype5 = 0);
 
-    TSymbol* findBuiltIn(const TString &name)
+    TSymbol *find(const TString &name, int shaderVersion,
+                  bool *builtIn = NULL, bool *sameScope = NULL) const;
+    TSymbol *findBuiltIn(const TString &name, int shaderVersion) const;
+    
+    TSymbolTableLevel *getOuterLevel()
     {
-        return table[0]->find(name);
-    }
-
-    TSymbolTableLevel* getOuterLevel() {
-        assert(table.size() >= 2);
+        assert(currentLevel() >= 1);
         return table[currentLevel() - 1];
     }
 
-    void relateToOperator(const char* name, TOperator op) {
-        table[0]->relateToOperator(name, op);
+    void relateToOperator(ESymbolLevel level, const char *name, TOperator op)
+    {
+        table[level]->relateToOperator(name, op);
     }
-    void relateToExtension(const char* name, const TString& ext) {
-        table[0]->relateToExtension(name, ext);
+    void relateToExtension(ESymbolLevel level, const char *name, const TString &ext)
+    {
+        table[level]->relateToExtension(name, ext);
     }
     void dump(TInfoSink &infoSink) const;
 
-    bool setDefaultPrecision(const TPublicType& type, TPrecision prec) {
-        if (!supportsPrecision(type.type))
+    bool setDefaultPrecision(const TPublicType &type, TPrecision prec)
+    {
+        if (!SupportsPrecision(type.type))
             return false;
-        if (type.size != 1 || type.matrix || type.array)
+        if (type.isAggregate())
             return false; // Not allowed to set for aggregate types
         int indexOfLastElement = static_cast<int>(precisionStack.size()) - 1;
-        (*precisionStack[indexOfLastElement])[type.type] = prec; // Uses map operator [], overwrites the current value
+        // Uses map operator [], overwrites the current value
+        (*precisionStack[indexOfLastElement])[type.type] = prec;
         return true;
     }
 
-    // Searches down the precisionStack for a precision qualifier for the specified TBasicType
-    TPrecision getDefaultPrecision(TBasicType type) {
-        if (!supportsPrecision(type))
-            return EbpUndefined;
-        int level = static_cast<int>(precisionStack.size()) - 1;
-        assert(level >= 0); // Just to be safe. Should not happen.
-        PrecisionStackLevel::iterator it;
-        TPrecision prec = EbpUndefined; // If we dont find anything we return this. Should we error check this?
-        while (level >= 0) {
-            it = precisionStack[level]->find(type);
-            if (it != precisionStack[level]->end()) {
-                prec = (*it).second;
-                break;
-            }
-            level--;
-        }
-        return prec;
-    }
+    // Searches down the precisionStack for a precision qualifier
+    // for the specified TBasicType
+    TPrecision getDefaultPrecision(TBasicType type) const;
 
-private:
-    int currentLevel() const { return static_cast<int>(table.size()) - 1; }
+    static int nextUniqueId()
+    {
+        return ++uniqueIdCounter;
+    }
 
-    bool supportsPrecision(TBasicType type) {
-      // Only supports precision for int, float, and sampler types.
-      return type == EbtFloat || type == EbtInt || IsSampler(type);
+  private:
+    ESymbolLevel currentLevel() const
+    {
+        return static_cast<ESymbolLevel>(table.size() - 1);
     }
 
-    int uniqueId;     // for unique identification in code generation
-    std::vector<TSymbolTableLevel*> table;
+    std::vector<TSymbolTableLevel *> table;
     typedef TMap<TBasicType, TPrecision> PrecisionStackLevel;
-    std::vector<PrecisionStackLevel*> precisionStack;
+    std::vector< PrecisionStackLevel *> precisionStack;
+
+    static int uniqueIdCounter;
 };
 
 #endif // _SYMBOL_TABLE_INCLUDED_
diff --git a/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.cpp b/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.cpp
index 9262f7af8c..5b99fea948 100644
--- a/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -7,9 +7,10 @@
 #include "compiler/translator/TranslatorESSL.h"
 
 #include "compiler/translator/OutputESSL.h"
+#include "angle_gl.h"
 
-TranslatorESSL::TranslatorESSL(ShShaderType type, ShShaderSpec spec)
-    : TCompiler(type, spec) {
+TranslatorESSL::TranslatorESSL(sh::GLenum type, ShShaderSpec spec)
+    : TCompiler(type, spec, SH_ESSL_OUTPUT) {
 }
 
 void TranslatorESSL::translate(TIntermNode* root) {
@@ -20,13 +21,13 @@ void TranslatorESSL::translate(TIntermNode* root) {
 
     // Write emulated built-in functions if needed.
     getBuiltInFunctionEmulator().OutputEmulatedFunctionDefinition(
-        sink, getShaderType() == SH_FRAGMENT_SHADER);
+        sink, getShaderType() == GL_FRAGMENT_SHADER);
 
     // Write array bounds clamping emulation if needed.
     getArrayBoundsClamper().OutputClampingFunctionDefinition(sink);
 
     // Write translated shader.
-    TOutputESSL outputESSL(sink, getArrayIndexClampingStrategy(), getHashFunction(), getNameMap(), getSymbolTable());
+    TOutputESSL outputESSL(sink, getArrayIndexClampingStrategy(), getHashFunction(), getNameMap(), getSymbolTable(), getShaderVersion());
     root->traverse(&outputESSL);
 }
 
diff --git a/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.h b/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.h
index e18f3c25ec..55766822d1 100644
--- a/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/TranslatorESSL.h
@@ -7,11 +7,11 @@
 #ifndef COMPILER_TRANSLATORESSL_H_
 #define COMPILER_TRANSLATORESSL_H_
 
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/Compiler.h"
 
 class TranslatorESSL : public TCompiler {
 public:
-    TranslatorESSL(ShShaderType type, ShShaderSpec spec);
+    TranslatorESSL(sh::GLenum type, ShShaderSpec spec);
 
 protected:
     virtual void translate(TIntermNode* root);
diff --git a/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.cpp b/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.cpp
index 6688d7f362..4b2aecab33 100644
--- a/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -9,7 +9,7 @@
 #include "compiler/translator/OutputGLSL.h"
 #include "compiler/translator/VersionGLSL.h"
 
-static void writeVersion(ShShaderType type, TIntermNode* root,
+static void writeVersion(sh::GLenum type, TIntermNode* root,
                          TInfoSinkBase& sink) {
     TVersionGLSL versionGLSL(type);
     root->traverse(&versionGLSL);
@@ -21,8 +21,8 @@ static void writeVersion(ShShaderType type, TIntermNode* root,
     }
 }
 
-TranslatorGLSL::TranslatorGLSL(ShShaderType type, ShShaderSpec spec)
-    : TCompiler(type, spec) {
+TranslatorGLSL::TranslatorGLSL(sh::GLenum type, ShShaderSpec spec)
+    : TCompiler(type, spec, SH_GLSL_OUTPUT) {
 }
 
 void TranslatorGLSL::translate(TIntermNode* root) {
@@ -31,6 +31,9 @@ void TranslatorGLSL::translate(TIntermNode* root) {
     // Write GLSL version.
     writeVersion(getShaderType(), root, sink);
 
+    // Write extension behaviour as needed
+    writeExtensionBehavior();
+
     // Write emulated built-in functions if needed.
     getBuiltInFunctionEmulator().OutputEmulatedFunctionDefinition(
         sink, false);
@@ -39,6 +42,23 @@ void TranslatorGLSL::translate(TIntermNode* root) {
     getArrayBoundsClamper().OutputClampingFunctionDefinition(sink);
 
     // Write translated shader.
-    TOutputGLSL outputGLSL(sink, getArrayIndexClampingStrategy(), getHashFunction(), getNameMap(), getSymbolTable());
+    TOutputGLSL outputGLSL(sink, getArrayIndexClampingStrategy(), getHashFunction(), getNameMap(), getSymbolTable(), getShaderVersion());
     root->traverse(&outputGLSL);
 }
+
+void TranslatorGLSL::writeExtensionBehavior() {
+    TInfoSinkBase& sink = getInfoSink().obj;
+    const TExtensionBehavior& extensionBehavior = getExtensionBehavior();
+    for (TExtensionBehavior::const_iterator iter = extensionBehavior.begin();
+         iter != extensionBehavior.end(); ++iter) {
+        if (iter->second == EBhUndefined)
+            continue;
+
+        // For GLSL output, we don't need to emit most extensions explicitly,
+        // but some we need to translate.
+        if (iter->first == "GL_EXT_shader_texture_lod") {
+            sink << "#extension GL_ARB_shader_texture_lod : "
+                 << getBehaviorString(iter->second) << "\n";
+        }
+    }
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.h b/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.h
index 40bb3145e8..3c6c2e426a 100644
--- a/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/TranslatorGLSL.h
@@ -7,14 +7,17 @@
 #ifndef COMPILER_TRANSLATORGLSL_H_
 #define COMPILER_TRANSLATORGLSL_H_
 
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/Compiler.h"
 
 class TranslatorGLSL : public TCompiler {
 public:
-    TranslatorGLSL(ShShaderType type, ShShaderSpec spec);
+    TranslatorGLSL(sh::GLenum type, ShShaderSpec spec);
 
 protected:
     virtual void translate(TIntermNode* root);
+
+private:
+    void writeExtensionBehavior();
 };
 
 #endif  // COMPILER_TRANSLATORGLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.cpp b/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.cpp
index 3c1db011b6..22bf60e86e 100644
--- a/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.cpp
@@ -9,16 +9,40 @@
 #include "compiler/translator/InitializeParseContext.h"
 #include "compiler/translator/OutputHLSL.h"
 
-TranslatorHLSL::TranslatorHLSL(ShShaderType type, ShShaderSpec spec, ShShaderOutput output)
-    : TCompiler(type, spec), mOutputType(output)
+TranslatorHLSL::TranslatorHLSL(sh::GLenum type, ShShaderSpec spec, ShShaderOutput output)
+    : TCompiler(type, spec, output)
 {
 }
 
 void TranslatorHLSL::translate(TIntermNode *root)
 {
     TParseContext& parseContext = *GetGlobalParseContext();
-    sh::OutputHLSL outputHLSL(parseContext, getResources(), mOutputType);
+    sh::OutputHLSL outputHLSL(parseContext, this);
 
     outputHLSL.output();
-    mActiveUniforms = outputHLSL.getUniforms();
+
+    mInterfaceBlockRegisterMap = outputHLSL.getInterfaceBlockRegisterMap();
+    mUniformRegisterMap = outputHLSL.getUniformRegisterMap();
+}
+
+bool TranslatorHLSL::hasInterfaceBlock(const std::string &interfaceBlockName) const
+{
+    return (mInterfaceBlockRegisterMap.count(interfaceBlockName) > 0);
+}
+
+unsigned int TranslatorHLSL::getInterfaceBlockRegister(const std::string &interfaceBlockName) const
+{
+    ASSERT(hasInterfaceBlock(interfaceBlockName));
+    return mInterfaceBlockRegisterMap.find(interfaceBlockName)->second;
+}
+
+bool TranslatorHLSL::hasUniform(const std::string &uniformName) const
+{
+    return (mUniformRegisterMap.count(uniformName) > 0);
+}
+
+unsigned int TranslatorHLSL::getUniformRegister(const std::string &uniformName) const
+{
+    ASSERT(hasUniform(uniformName));
+    return mUniformRegisterMap.find(uniformName)->second;
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.h b/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.h
index 6204b30cc2..11a042d83a 100644
--- a/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/TranslatorHLSL.h
@@ -7,21 +7,25 @@
 #ifndef COMPILER_TRANSLATORHLSL_H_
 #define COMPILER_TRANSLATORHLSL_H_
 
-#include "compiler/translator/ShHandle.h"
-#include "compiler/translator/Uniform.h"
-
-class TranslatorHLSL : public TCompiler {
-public:
-    TranslatorHLSL(ShShaderType type, ShShaderSpec spec, ShShaderOutput output);
+#include "compiler/translator/Compiler.h"
 
+class TranslatorHLSL : public TCompiler
+{
+  public:
+    TranslatorHLSL(sh::GLenum type, ShShaderSpec spec, ShShaderOutput output);
     virtual TranslatorHLSL *getAsTranslatorHLSL() { return this; }
-    const sh::ActiveUniforms &getUniforms() { return mActiveUniforms; }
 
-protected:
+    bool hasInterfaceBlock(const std::string &interfaceBlockName) const;
+    unsigned int getInterfaceBlockRegister(const std::string &interfaceBlockName) const;
+
+    bool hasUniform(const std::string &uniformName) const;
+    unsigned int getUniformRegister(const std::string &uniformName) const;
+
+  protected:
     virtual void translate(TIntermNode* root);
 
-    sh::ActiveUniforms mActiveUniforms;
-    ShShaderOutput mOutputType;
+    std::map<std::string, unsigned int> mInterfaceBlockRegisterMap;
+    std::map<std::string, unsigned int> mUniformRegisterMap;
 };
 
 #endif  // COMPILER_TRANSLATORHLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/Types.cpp b/src/3rdparty/angle/src/compiler/translator/Types.cpp
new file mode 100644
index 0000000000..d36936fb23
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/Types.cpp
@@ -0,0 +1,234 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#if defined(_MSC_VER)
+#pragma warning(disable: 4718)
+#endif
+
+#include "compiler/translator/Types.h"
+
+#include <algorithm>
+#include <climits>
+
+const char* getBasicString(TBasicType t)
+{
+    switch (t)
+    {
+      case EbtVoid:                 return "void";                 break;
+      case EbtFloat:                return "float";                break;
+      case EbtInt:                  return "int";                  break;
+      case EbtUInt:                 return "uint";                 break;
+      case EbtBool:                 return "bool";                 break;
+      case EbtSampler2D:            return "sampler2D";            break;
+      case EbtSampler3D:            return "sampler3D";            break;
+      case EbtSamplerCube:          return "samplerCube";          break;
+      case EbtSamplerExternalOES:   return "samplerExternalOES";   break;
+      case EbtSampler2DRect:        return "sampler2DRect";        break;
+      case EbtSampler2DArray:       return "sampler2DArray";       break;
+      case EbtISampler2D:           return "isampler2D";           break;
+      case EbtISampler3D:           return "isampler3D";           break;
+      case EbtISamplerCube:         return "isamplerCube";         break;
+      case EbtISampler2DArray:      return "isampler2DArray";      break;
+      case EbtUSampler2D:           return "usampler2D";           break;
+      case EbtUSampler3D:           return "usampler3D";           break;
+      case EbtUSamplerCube:         return "usamplerCube";         break;
+      case EbtUSampler2DArray:      return "usampler2DArray";      break;
+      case EbtSampler2DShadow:      return "sampler2DShadow";      break;
+      case EbtSamplerCubeShadow:    return "samplerCubeShadow";    break;
+      case EbtSampler2DArrayShadow: return "sampler2DArrayShadow"; break;
+      case EbtStruct:               return "structure";            break;
+      case EbtInterfaceBlock:       return "interface block";      break;
+      default: UNREACHABLE();       return "unknown type";
+    }
+}
+
+TType::TType(const TPublicType &p)
+    : type(p.type), precision(p.precision), qualifier(p.qualifier), layoutQualifier(p.layoutQualifier),
+      primarySize(p.primarySize), secondarySize(p.secondarySize), array(p.array), arraySize(p.arraySize),
+      interfaceBlock(0), structure(0)
+{
+    if (p.userDef)
+        structure = p.userDef->getStruct();
+}
+
+bool TStructure::equals(const TStructure &other) const
+{
+    return (uniqueId() == other.uniqueId());
+}
+
+//
+// Recursively generate mangled names.
+//
+TString TType::buildMangledName() const
+{
+    TString mangledName;
+    if (isMatrix())
+        mangledName += 'm';
+    else if (isVector())
+        mangledName += 'v';
+
+    switch (type)
+    {
+      case EbtFloat:
+        mangledName += 'f';
+        break;
+      case EbtInt:
+        mangledName += 'i';
+        break;
+      case EbtUInt:
+        mangledName += 'u';
+        break;
+      case EbtBool:
+        mangledName += 'b';
+        break;
+      case EbtSampler2D:
+        mangledName += "s2";
+        break;
+      case EbtSampler3D:
+        mangledName += "s3";
+        break;
+      case EbtSamplerCube:
+        mangledName += "sC";
+        break;
+      case EbtSampler2DArray:
+        mangledName += "s2a";
+        break;
+      case EbtSamplerExternalOES:
+        mangledName += "sext";
+        break;
+      case EbtSampler2DRect:
+        mangledName += "s2r";
+        break;
+      case EbtISampler2D:
+        mangledName += "is2";
+        break;
+      case EbtISampler3D:
+        mangledName += "is3";
+        break;
+      case EbtISamplerCube:
+        mangledName += "isC";
+        break;
+      case EbtISampler2DArray:
+        mangledName += "is2a";
+        break;
+      case EbtUSampler2D:
+        mangledName += "us2";
+        break;
+      case EbtUSampler3D:
+        mangledName += "us3";
+        break;
+      case EbtUSamplerCube:
+        mangledName += "usC";
+        break;
+      case EbtUSampler2DArray:
+        mangledName += "us2a";
+        break;
+      case EbtSampler2DShadow:
+        mangledName += "s2s";
+        break;
+      case EbtSamplerCubeShadow:
+        mangledName += "sCs";
+        break;
+      case EbtSampler2DArrayShadow:
+        mangledName += "s2as";
+        break;
+      case EbtStruct:
+        mangledName += structure->mangledName();
+        break;
+      case EbtInterfaceBlock:
+        mangledName += interfaceBlock->mangledName();
+        break;
+      default:
+        UNREACHABLE();
+    }
+
+    if (isMatrix())
+    {
+        mangledName += static_cast<char>('0' + getCols());
+        mangledName += static_cast<char>('x');
+        mangledName += static_cast<char>('0' + getRows());
+    }
+    else
+    {
+        mangledName += static_cast<char>('0' + getNominalSize());
+    }
+
+    if (isArray())
+    {
+        char buf[20];
+        snprintf(buf, sizeof(buf), "%d", arraySize);
+        mangledName += '[';
+        mangledName += buf;
+        mangledName += ']';
+    }
+    return mangledName;
+}
+
+size_t TType::getObjectSize() const
+{
+    size_t totalSize;
+
+    if (getBasicType() == EbtStruct)
+        totalSize = structure->objectSize();
+    else
+        totalSize = primarySize * secondarySize;
+
+    if (isArray())
+    {
+        size_t arraySize = getArraySize();
+        if (arraySize > INT_MAX / totalSize)
+            totalSize = INT_MAX;
+        else
+            totalSize *= arraySize;
+    }
+
+    return totalSize;
+}
+
+bool TStructure::containsArrays() const
+{
+    for (size_t i = 0; i < mFields->size(); ++i)
+    {
+        const TType *fieldType = (*mFields)[i]->type();
+        if (fieldType->isArray() || fieldType->isStructureContainingArrays())
+            return true;
+    }
+    return false;
+}
+
+TString TFieldListCollection::buildMangledName() const
+{
+    TString mangledName(mangledNamePrefix());
+    mangledName += *mName;
+    for (size_t i = 0; i < mFields->size(); ++i)
+    {
+        mangledName += '-';
+        mangledName += (*mFields)[i]->type()->getMangledName();
+    }
+    return mangledName;
+}
+
+size_t TFieldListCollection::calculateObjectSize() const
+{
+    size_t size = 0;
+    for (size_t i = 0; i < mFields->size(); ++i)
+    {
+        size_t fieldSize = (*mFields)[i]->type()->getObjectSize();
+        if (fieldSize > INT_MAX - size)
+            size = INT_MAX;
+        else
+            size += fieldSize;
+    }
+    return size;
+}
+
+int TStructure::calculateDeepestNesting() const
+{
+    int maxNesting = 0;
+    for (size_t i = 0; i < mFields->size(); ++i)
+        maxNesting = std::max(maxNesting, (*mFields)[i]->type()->getDeepestStructNesting());
+    return 1 + maxNesting;
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/Types.h b/src/3rdparty/angle/src/compiler/translator/Types.h
index 119f4f29e5..075196daa3 100644
--- a/src/3rdparty/angle/src/compiler/translator/Types.h
+++ b/src/3rdparty/angle/src/compiler/translator/Types.h
@@ -15,76 +15,202 @@
 
 struct TPublicType;
 class TType;
+class TSymbol;
 
 class TField
 {
-public:
+  public:
     POOL_ALLOCATOR_NEW_DELETE();
-    TField(TType* type, TString* name) : mType(type), mName(name) {}
+    TField(TType *type, TString *name, const TSourceLoc &line)
+        : mType(type),
+          mName(name),
+          mLine(line)
+    {
+    }
 
     // TODO(alokp): We should only return const type.
     // Fix it by tweaking grammar.
-    TType* type() { return mType; }
-    const TType* type() const { return mType; }
+    TType *type()
+    {
+        return mType;
+    }
+    const TType *type() const
+    {
+        return mType;
+    }
 
-    const TString& name() const { return *mName; }
+    const TString &name() const
+    {
+        return *mName;
+    }
+    const TSourceLoc &line() const
+    {
+        return mLine;
+    }
 
-private:
+  private:
     DISALLOW_COPY_AND_ASSIGN(TField);
-    TType* mType;
-    TString* mName;
+    TType *mType;
+    TString *mName;
+    TSourceLoc mLine;
 };
 
-typedef TVector<TField*> TFieldList;
-inline TFieldList* NewPoolTFieldList()
+typedef TVector<TField *> TFieldList;
+inline TFieldList *NewPoolTFieldList()
 {
-    void* memory = GetGlobalPoolAllocator()->allocate(sizeof(TFieldList));
+    void *memory = GetGlobalPoolAllocator()->allocate(sizeof(TFieldList));
     return new(memory) TFieldList;
 }
 
-class TStructure
+class TFieldListCollection
 {
-public:
-    POOL_ALLOCATOR_NEW_DELETE();
-    TStructure(TString* name, TFieldList* fields)
-        : mName(name),
-          mFields(fields),
-          mObjectSize(0),
-          mDeepestNesting(0) {
+  public:
+    const TString &name() const
+    {
+        return *mName;
+    }
+    const TFieldList &fields() const
+    {
+        return *mFields;
     }
 
-    const TString& name() const { return *mName; }
-    const TFieldList& fields() const { return *mFields; }
-
-    const TString& mangledName() const {
+    const TString &mangledName() const
+    {
         if (mMangledName.empty())
             mMangledName = buildMangledName();
         return mMangledName;
     }
-    size_t objectSize() const {
+    size_t objectSize() const
+    {
         if (mObjectSize == 0)
             mObjectSize = calculateObjectSize();
         return mObjectSize;
     };
-    int deepestNesting() const {
+
+  protected:
+    TFieldListCollection(const TString *name, TFieldList *fields)
+        : mName(name),
+          mFields(fields),
+          mObjectSize(0)
+    {
+    }
+    TString buildMangledName() const;
+    size_t calculateObjectSize() const;
+    virtual TString mangledNamePrefix() const = 0;
+
+    const TString *mName;
+    TFieldList *mFields;
+
+    mutable TString mMangledName;
+    mutable size_t mObjectSize;
+};
+
+// May also represent interface blocks
+class TStructure : public TFieldListCollection
+{
+  public:
+    POOL_ALLOCATOR_NEW_DELETE();
+    TStructure(const TString *name, TFieldList *fields)
+        : TFieldListCollection(name, fields),
+          mDeepestNesting(0),
+          mUniqueId(0)
+    {
+    }
+
+    int deepestNesting() const
+    {
         if (mDeepestNesting == 0)
             mDeepestNesting = calculateDeepestNesting();
         return mDeepestNesting;
     }
     bool containsArrays() const;
 
-private:
+    bool equals(const TStructure &other) const;
+
+    void setUniqueId(int uniqueId)
+    {
+        mUniqueId = uniqueId;
+    }
+
+    int uniqueId() const
+    {
+        ASSERT(mUniqueId != 0);
+        return mUniqueId;
+    }
+
+  private:
     DISALLOW_COPY_AND_ASSIGN(TStructure);
-    TString buildMangledName() const;
-    size_t calculateObjectSize() const;
-    int calculateDeepestNesting() const;
 
-    TString* mName;
-    TFieldList* mFields;
+    // TODO(zmo): Find a way to get rid of the const_cast in function
+    // setName().  At the moment keep this function private so only
+    // friend class RegenerateStructNames may call it.
+    friend class RegenerateStructNames;
+    void setName(const TString &name)
+    {
+        TString *mutableName = const_cast<TString *>(mName);
+        *mutableName = name;
+    }
+
+    virtual TString mangledNamePrefix() const
+    {
+        return "struct-";
+    }
+    int calculateDeepestNesting() const;
 
-    mutable TString mMangledName;
-    mutable size_t mObjectSize;
     mutable int mDeepestNesting;
+    int mUniqueId;
+};
+
+class TInterfaceBlock : public TFieldListCollection
+{
+  public:
+    POOL_ALLOCATOR_NEW_DELETE();
+    TInterfaceBlock(const TString *name, TFieldList *fields, const TString *instanceName,
+                    int arraySize, const TLayoutQualifier &layoutQualifier)
+        : TFieldListCollection(name, fields),
+          mInstanceName(instanceName),
+          mArraySize(arraySize),
+          mBlockStorage(layoutQualifier.blockStorage),
+          mMatrixPacking(layoutQualifier.matrixPacking)
+    {
+    }
+
+    const TString &instanceName() const
+    {
+        return *mInstanceName;
+    }
+    bool hasInstanceName() const
+    {
+        return mInstanceName != NULL;
+    }
+    bool isArray() const
+    {
+        return mArraySize > 0;
+    }
+    int arraySize() const
+    {
+        return mArraySize;
+    }
+    TLayoutBlockStorage blockStorage() const
+    {
+        return mBlockStorage;
+    }
+    TLayoutMatrixPacking matrixPacking() const
+    {
+        return mMatrixPacking;
+    }
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TInterfaceBlock);
+    virtual TString mangledNamePrefix() const
+    {
+        return "iblock-";
+    }
+
+    const TString *mInstanceName; // for interface block instance names
+    int mArraySize; // 0 if not an array
+    TLayoutBlockStorage mBlockStorage;
+    TLayoutMatrixPacking mMatrixPacking;
 };
 
 //
@@ -92,123 +218,228 @@ private:
 //
 class TType
 {
-public:
+  public:
     POOL_ALLOCATOR_NEW_DELETE();
-    TType() {}
-    TType(TBasicType t, TPrecision p, TQualifier q = EvqTemporary, unsigned char s = 1, bool m = false, bool a = false) :
-            type(t), precision(p), qualifier(q), size(s), matrix(m), array(a), arraySize(0), structure(0)
+    TType()
+    {
+    }
+    TType(TBasicType t, unsigned char ps = 1, unsigned char ss = 1)
+        : type(t), precision(EbpUndefined), qualifier(EvqGlobal),
+          layoutQualifier(TLayoutQualifier::create()),
+          primarySize(ps), secondarySize(ss), array(false), arraySize(0),
+          interfaceBlock(0), structure(0)
+    {
+    }
+    TType(TBasicType t, TPrecision p, TQualifier q = EvqTemporary,
+          unsigned char ps = 1, unsigned char ss = 1, bool a = false)
+        : type(t), precision(p), qualifier(q),
+          layoutQualifier(TLayoutQualifier::create()),
+          primarySize(ps), secondarySize(ss), array(a), arraySize(0),
+          interfaceBlock(0), structure(0)
     {
     }
     explicit TType(const TPublicType &p);
-    TType(TStructure* userDef, TPrecision p = EbpUndefined) :
-            type(EbtStruct), precision(p), qualifier(EvqTemporary), size(1), matrix(false), array(false), arraySize(0), structure(userDef)
+    TType(TStructure *userDef, TPrecision p = EbpUndefined)
+        : type(EbtStruct), precision(p), qualifier(EvqTemporary),
+          layoutQualifier(TLayoutQualifier::create()),
+          primarySize(1), secondarySize(1), array(false), arraySize(0),
+          interfaceBlock(0), structure(userDef)
+    {
+    }
+    TType(TInterfaceBlock *interfaceBlockIn, TQualifier qualifierIn,
+          TLayoutQualifier layoutQualifierIn, int arraySizeIn)
+        : type(EbtInterfaceBlock), precision(EbpUndefined), qualifier(qualifierIn),
+          layoutQualifier(layoutQualifierIn),
+          primarySize(1), secondarySize(1), array(arraySizeIn > 0), arraySize(arraySizeIn),
+          interfaceBlock(interfaceBlockIn), structure(0)
     {
     }
 
-    TBasicType getBasicType() const { return type; }
-    void setBasicType(TBasicType t) { type = t; }
+    TBasicType getBasicType() const
+    {
+        return type;
+    }
+    void setBasicType(TBasicType t)
+    {
+        type = t;
+    }
 
-    TPrecision getPrecision() const { return precision; }
-    void setPrecision(TPrecision p) { precision = p; }
+    TPrecision getPrecision() const
+    {
+        return precision;
+    }
+    void setPrecision(TPrecision p)
+    {
+        precision = p;
+    }
 
-    TQualifier getQualifier() const { return qualifier; }
-    void setQualifier(TQualifier q) { qualifier = q; }
+    TQualifier getQualifier() const
+    {
+        return qualifier;
+    }
+    void setQualifier(TQualifier q)
+    {
+        qualifier = q;
+    }
 
-    // One-dimensional size of single instance type
-    int getNominalSize() const { return size; }
-    void setNominalSize(unsigned char s) { size = s; }
-    // Full size of single instance of type
-    size_t getObjectSize() const;
+    TLayoutQualifier getLayoutQualifier() const
+    {
+        return layoutQualifier;
+    }
+    void setLayoutQualifier(TLayoutQualifier lq)
+    {
+        layoutQualifier = lq;
+    }
 
-    int elementRegisterCount() const
+    int getNominalSize() const
     {
-        if (structure)
-        {
-            const TFieldList &fields = getStruct()->fields();
-            int registerCount = 0;
+        return primarySize;
+    }
+    int getSecondarySize() const
+    {
+        return secondarySize;
+    }
+    int getCols() const
+    {
+        ASSERT(isMatrix());
+        return primarySize;
+    }
+    int getRows() const
+    {
+        ASSERT(isMatrix());
+        return secondarySize;
+    }
+    void setPrimarySize(unsigned char ps)
+    {
+        primarySize = ps;
+    }
+    void setSecondarySize(unsigned char ss)
+    {
+        secondarySize = ss;
+    }
 
-            for (size_t i = 0; i < fields.size(); i++)
-            {
-                registerCount += fields[i]->type()->totalRegisterCount();
-            }
+    // Full size of single instance of type
+    size_t getObjectSize() const;
 
-            return registerCount;
-        }
-        else if (isMatrix())
-        {
-            return getNominalSize();
-        }
-        else
-        {
-            return 1;
-        }
+    bool isMatrix() const
+    {
+        return primarySize > 1 && secondarySize > 1;
     }
-
-    int totalRegisterCount() const
+    bool isArray() const
     {
-        if (array)
-        {
-            return arraySize * elementRegisterCount();
-        }
-        else
-        {
-            return elementRegisterCount();
-        }
+        return array ? true : false;
+    }
+    int getArraySize() const
+    {
+        return arraySize;
+    }
+    void setArraySize(int s)
+    {
+        array = true;
+        arraySize = s;
+    }
+    void clearArrayness()
+    {
+        array = false;
+        arraySize = 0;
     }
 
-    bool isMatrix() const { return matrix ? true : false; }
-    void setMatrix(bool m) { matrix = m; }
-
-    bool isArray() const  { return array ? true : false; }
-    int getArraySize() const { return arraySize; }
-    void setArraySize(int s) { array = true; arraySize = s; }
-    void clearArrayness() { array = false; arraySize = 0; }
+    TInterfaceBlock *getInterfaceBlock() const
+    {
+        return interfaceBlock;
+    }
+    void setInterfaceBlock(TInterfaceBlock *interfaceBlockIn)
+    {
+        interfaceBlock = interfaceBlockIn;
+    }
+    bool isInterfaceBlock() const
+    {
+        return type == EbtInterfaceBlock;
+    }
 
-    bool isVector() const { return size > 1 && !matrix; }
-    bool isScalar() const { return size == 1 && !matrix && !structure; }
+    bool isVector() const
+    {
+        return primarySize > 1 && secondarySize == 1;
+    }
+    bool isScalar() const
+    {
+        return primarySize == 1 && secondarySize == 1 && !structure;
+    }
+    bool isScalarInt() const
+    {
+        return isScalar() && (type == EbtInt || type == EbtUInt);
+    }
 
-    TStructure* getStruct() const { return structure; }
-    void setStruct(TStructure* s) { structure = s; }
+    TStructure *getStruct() const
+    {
+        return structure;
+    }
+    void setStruct(TStructure *s)
+    {
+        structure = s;
+    }
 
-    const TString& getMangledName() const {
-        if (mangled.empty()) {
+    const TString &getMangledName()
+    {
+        if (mangled.empty())
+        {
             mangled = buildMangledName();
             mangled += ';';
         }
+
         return mangled;
     }
 
-    bool sameElementType(const TType& right) const {
-        return      type == right.type   &&
-                    size == right.size   &&
-                  matrix == right.matrix &&
-               structure == right.structure;
+    bool sameElementType(const TType &right) const
+    {
+        return type == right.type &&
+            primarySize == right.primarySize &&
+            secondarySize == right.secondarySize &&
+            structure == right.structure;
     }
-    bool operator==(const TType& right) const {
-        return      type == right.type   &&
-                    size == right.size   &&
-                  matrix == right.matrix &&
-                   array == right.array  && (!array || arraySize == right.arraySize) &&
-               structure == right.structure;
+    bool operator==(const TType &right) const
+    {
+        return type == right.type &&
+            primarySize == right.primarySize &&
+            secondarySize == right.secondarySize &&
+            array == right.array && (!array || arraySize == right.arraySize) &&
+            structure == right.structure;
         // don't check the qualifier, it's not ever what's being sought after
     }
-    bool operator!=(const TType& right) const {
+    bool operator!=(const TType &right) const
+    {
         return !operator==(right);
     }
-    bool operator<(const TType& right) const {
-        if (type != right.type) return type < right.type;
-        if (size != right.size) return size < right.size;
-        if (matrix != right.matrix) return matrix < right.matrix;
-        if (array != right.array) return array < right.array;
-        if (arraySize != right.arraySize) return arraySize < right.arraySize;
-        if (structure != right.structure) return structure < right.structure;
+    bool operator<(const TType &right) const
+    {
+        if (type != right.type)
+            return type < right.type;
+        if (primarySize != right.primarySize)
+            return primarySize < right.primarySize;
+        if (secondarySize != right.secondarySize)
+            return secondarySize < right.secondarySize;
+        if (array != right.array)
+            return array < right.array;
+        if (arraySize != right.arraySize)
+            return arraySize < right.arraySize;
+        if (structure != right.structure)
+            return structure < right.structure;
 
         return false;
     }
 
-    const char* getBasicString() const { return ::getBasicString(type); }
-    const char* getPrecisionString() const { return ::getPrecisionString(precision); }
-    const char* getQualifierString() const { return ::getQualifierString(qualifier); }
+    const char *getBasicString() const
+    {
+        return ::getBasicString(type);
+    }
+    const char *getPrecisionString() const
+    {
+        return ::getPrecisionString(precision);
+    }
+    const char *getQualifierString() const
+    {
+        return ::getQualifierString(qualifier);
+    }
     TString getCompleteString() const;
 
     // If this type is a struct, returns the deepest struct nesting of
@@ -223,26 +454,35 @@ public:
     // For type "nesting2", this method would return 2 -- the number
     // of structures through which indirection must occur to reach the
     // deepest field (nesting2.field1.position).
-    int getDeepestStructNesting() const {
+    int getDeepestStructNesting() const
+    {
         return structure ? structure->deepestNesting() : 0;
     }
 
-    bool isStructureContainingArrays() const {
+    bool isStructureContainingArrays() const
+    {
         return structure ? structure->containsArrays() : false;
     }
 
-private:
+  protected:
     TString buildMangledName() const;
+    size_t getStructSize() const;
+    void computeDeepestStructNesting();
 
     TBasicType type;
     TPrecision precision;
     TQualifier qualifier;
-    unsigned char size;
-    bool matrix;
+    TLayoutQualifier layoutQualifier;
+    unsigned char primarySize; // size of vector or cols matrix
+    unsigned char secondarySize; // rows of a matrix
     bool array;
     int arraySize;
 
-    TStructure* structure;      // 0 unless this is a struct
+    // 0 unless this is an interface block, or interface block member variable
+    TInterfaceBlock *interfaceBlock;
+
+    // 0 unless this is a struct
+    TStructure *structure;
 
     mutable TString mangled;
 };
@@ -259,32 +499,40 @@ private:
 struct TPublicType
 {
     TBasicType type;
+    TLayoutQualifier layoutQualifier;
     TQualifier qualifier;
     TPrecision precision;
-    unsigned char size;          // size of vector or matrix, not size of array
-    bool matrix;
+    unsigned char primarySize;          // size of vector or cols of matrix
+    unsigned char secondarySize;        // rows of matrix
     bool array;
     int arraySize;
-    TType* userDef;
+    TType *userDef;
     TSourceLoc line;
 
-    void setBasic(TBasicType bt, TQualifier q, const TSourceLoc& ln)
+    void setBasic(TBasicType bt, TQualifier q, const TSourceLoc &ln)
     {
         type = bt;
+        layoutQualifier = TLayoutQualifier::create();
         qualifier = q;
         precision = EbpUndefined;
-        size = 1;
-        matrix = false;
+        primarySize = 1;
+        secondarySize = 1;
         array = false;
         arraySize = 0;
         userDef = 0;
         line = ln;
     }
 
-    void setAggregate(unsigned char s, bool m = false)
+    void setAggregate(unsigned char size)
+    {
+        primarySize = size;
+    }
+
+    void setMatrix(unsigned char c, unsigned char r)
     {
-        size = s;
-        matrix = m;
+        ASSERT(c > 1 && r > 1 && c <= 4 && r <= 4);
+        primarySize = c;
+        secondarySize = r;
     }
 
     void setArray(bool a, int s = 0)
@@ -302,6 +550,38 @@ struct TPublicType
 
         return userDef->isStructureContainingArrays();
     }
+
+    bool isMatrix() const
+    {
+        return primarySize > 1 && secondarySize > 1;
+    }
+
+    bool isVector() const
+    {
+        return primarySize > 1 && secondarySize == 1;
+    }
+
+    int getCols() const
+    {
+        ASSERT(isMatrix());
+        return primarySize;
+    }
+
+    int getRows() const
+    {
+        ASSERT(isMatrix());
+        return secondarySize;
+    }
+
+    int getNominalSize() const
+    {
+        return primarySize;
+    }
+
+    bool isAggregate() const
+    {
+        return array || isMatrix() || isVector();
+    }
 };
 
 #endif // _TYPES_INCLUDED_
diff --git a/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.cpp b/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.cpp
index b7826119ae..65f50c4cc3 100644
--- a/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.cpp
@@ -12,6 +12,7 @@
 
 #include "compiler/translator/InfoSink.h"
 #include "compiler/translator/OutputHLSL.h"
+#include "compiler/translator/UtilsHLSL.h"
 
 namespace sh
 {
@@ -117,7 +118,7 @@ bool UnfoldShortCircuit::visitSelection(Visit visit, TIntermSelection *node)
     {
         int i = mTemporaryIndex;
 
-        out << mOutputHLSL->typeString(node->getType()) << " s" << i << ";\n";
+        out << TypeString(node->getType()) << " s" << i << ";\n";
 
         out << "{\n";
 
diff --git a/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.h b/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.h
index 1e416bc04c..6fd3b457bd 100644
--- a/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.h
+++ b/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuit.h
@@ -9,7 +9,7 @@
 #ifndef COMPILER_UNFOLDSHORTCIRCUIT_H_
 #define COMPILER_UNFOLDSHORTCIRCUIT_H_
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/ParseContext.h"
 
 namespace sh
diff --git a/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuitAST.h b/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuitAST.h
index 24c14a60e3..3acaf7ee7c 100644
--- a/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuitAST.h
+++ b/src/3rdparty/angle/src/compiler/translator/UnfoldShortCircuitAST.h
@@ -11,7 +11,7 @@
 #define COMPILER_UNFOLD_SHORT_CIRCUIT_AST_H_
 
 #include "common/angleutils.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 // This traverser identifies all the short circuit binary  nodes that need to
 // be replaced, and creates the corresponding replacement nodes. However,
diff --git a/src/3rdparty/angle/src/compiler/translator/Uniform.cpp b/src/3rdparty/angle/src/compiler/translator/Uniform.cpp
deleted file mode 100644
index 922e13f071..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/Uniform.cpp
+++ /dev/null
@@ -1,21 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#include "compiler/translator/Uniform.h"
-
-namespace sh
-{
-
-Uniform::Uniform(GLenum type, GLenum precision, const char *name, int arraySize, int registerIndex)
-{
-    this->type = type;
-    this->precision = precision;
-    this->name = name;
-    this->arraySize = arraySize;
-    this->registerIndex = registerIndex;
-}
-
-}
diff --git a/src/3rdparty/angle/src/compiler/translator/Uniform.h b/src/3rdparty/angle/src/compiler/translator/Uniform.h
deleted file mode 100644
index 4c53ffa7d2..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/Uniform.h
+++ /dev/null
@@ -1,35 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#ifndef COMPILER_UNIFORM_H_
-#define COMPILER_UNIFORM_H_
-
-#include <string>
-#include <vector>
-
-#define GL_APICALL
-#include <GLES2/gl2.h>
-
-namespace sh
-{
-
-struct Uniform
-{
-    Uniform(GLenum type, GLenum precision, const char *name, int arraySize, int registerIndex);
-
-    GLenum type;
-    GLenum precision;
-    std::string name;
-    unsigned int arraySize;
-    
-    int registerIndex;
-};
-
-typedef std::vector<Uniform> ActiveUniforms;
-
-}
-
-#endif   // COMPILER_UNIFORM_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/UniformHLSL.cpp b/src/3rdparty/angle/src/compiler/translator/UniformHLSL.cpp
new file mode 100644
index 0000000000..61b6ed7455
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/UniformHLSL.cpp
@@ -0,0 +1,281 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// UniformHLSL.cpp:
+//   Methods for GLSL to HLSL translation for uniforms and interface blocks.
+//
+
+#include "OutputHLSL.h"
+#include "common/blocklayout.h"
+#include "common/utilities.h"
+#include "compiler/translator/UniformHLSL.h"
+#include "compiler/translator/StructureHLSL.h"
+#include "compiler/translator/util.h"
+#include "compiler/translator/UtilsHLSL.h"
+#include "compiler/translator/TranslatorHLSL.h"
+
+namespace sh
+{
+
+static const char *UniformRegisterPrefix(const TType &type)
+{
+    if (IsSampler(type.getBasicType()))
+    {
+        return "s";
+    }
+    else
+    {
+        return "c";
+    }
+}
+
+static TString InterfaceBlockFieldTypeString(const TField &field, TLayoutBlockStorage blockStorage)
+{
+    const TType &fieldType = *field.type();
+    const TLayoutMatrixPacking matrixPacking = fieldType.getLayoutQualifier().matrixPacking;
+    ASSERT(matrixPacking != EmpUnspecified);
+    TStructure *structure = fieldType.getStruct();
+
+    if (fieldType.isMatrix())
+    {
+        // Use HLSL row-major packing for GLSL column-major matrices
+        const TString &matrixPackString = (matrixPacking == EmpRowMajor ? "column_major" : "row_major");
+        return matrixPackString + " " + TypeString(fieldType);
+    }
+    else if (structure)
+    {
+        // Use HLSL row-major packing for GLSL column-major matrices
+        return QualifiedStructNameString(*structure, matrixPacking == EmpColumnMajor,
+            blockStorage == EbsStd140);
+    }
+    else
+    {
+        return TypeString(fieldType);
+    }
+}
+
+static TString InterfaceBlockStructName(const TInterfaceBlock &interfaceBlock)
+{
+    return DecoratePrivate(interfaceBlock.name()) + "_type";
+}
+
+UniformHLSL::UniformHLSL(StructureHLSL *structureHLSL, TranslatorHLSL *translator)
+    : mUniformRegister(0),
+      mInterfaceBlockRegister(0),
+      mSamplerRegister(0),
+      mStructureHLSL(structureHLSL),
+      mOutputType(translator->getOutputType()),
+      mUniforms(translator->getUniforms())
+{}
+
+void UniformHLSL::reserveUniformRegisters(unsigned int registerCount)
+{
+    mUniformRegister = registerCount;
+}
+
+void UniformHLSL::reserveInterfaceBlockRegisters(unsigned int registerCount)
+{
+    mInterfaceBlockRegister = registerCount;
+}
+
+const Uniform *UniformHLSL::findUniformByName(const TString &name) const
+{
+    for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); ++uniformIndex)
+    {
+        if (mUniforms[uniformIndex].name == name.c_str())
+        {
+            return &mUniforms[uniformIndex];
+        }
+    }
+
+    UNREACHABLE();
+    return NULL;
+}
+
+unsigned int UniformHLSL::declareUniformAndAssignRegister(const TType &type, const TString &name)
+{
+    unsigned int registerIndex = (IsSampler(type.getBasicType()) ? mSamplerRegister : mUniformRegister);
+
+    const Uniform *uniform = findUniformByName(name);
+    ASSERT(uniform);
+
+    mUniformRegisterMap[uniform->name] = registerIndex;
+
+    unsigned int registerCount = HLSLVariableRegisterCount(*uniform, mOutputType);
+
+    if (gl::IsSampler(uniform->type))
+    {
+        mSamplerRegister += registerCount;
+    }
+    else
+    {
+        mUniformRegister += registerCount;
+    }
+
+    return registerIndex;
+}
+
+TString UniformHLSL::uniformsHeader(ShShaderOutput outputType, const ReferencedSymbols &referencedUniforms)
+{
+    TString uniforms;
+
+    for (ReferencedSymbols::const_iterator uniformIt = referencedUniforms.begin();
+         uniformIt != referencedUniforms.end(); uniformIt++)
+    {
+        const TIntermSymbol &uniform = *uniformIt->second;
+        const TType &type = uniform.getType();
+        const TString &name = uniform.getSymbol();
+
+        unsigned int registerIndex = declareUniformAndAssignRegister(type, name);
+
+        if (outputType == SH_HLSL11_OUTPUT && IsSampler(type.getBasicType()))   // Also declare the texture
+        {
+            uniforms += "uniform " + SamplerString(type) + " sampler_" + DecorateUniform(name, type) + ArrayString(type) +
+                        " : register(s" + str(registerIndex) + ");\n";
+
+            uniforms += "uniform " + TextureString(type) + " texture_" + DecorateUniform(name, type) + ArrayString(type) +
+                        " : register(t" + str(registerIndex) + ");\n";
+        }
+        else
+        {
+            const TStructure *structure = type.getStruct();
+            // If this is a nameless struct, we need to use its full definition, rather than its (empty) name.
+            // TypeString() will invoke defineNameless in this case; qualifier prefixes are unnecessary for 
+            // nameless structs in ES, as nameless structs cannot be used anywhere that layout qualifiers are
+            // permitted.
+            const TString &typeName = ((structure && !structure->name().empty()) ?
+                                        QualifiedStructNameString(*structure, false, false) : TypeString(type));
+
+            const TString &registerString = TString("register(") + UniformRegisterPrefix(type) + str(registerIndex) + ")";
+
+            uniforms += "uniform " + typeName + " " + DecorateUniform(name, type) + ArrayString(type) + " : " + registerString + ";\n";
+        }
+    }
+
+    return (uniforms.empty() ? "" : ("// Uniforms\n\n" + uniforms));
+}
+
+TString UniformHLSL::interfaceBlocksHeader(const ReferencedSymbols &referencedInterfaceBlocks)
+{
+    TString interfaceBlocks;
+
+    for (ReferencedSymbols::const_iterator interfaceBlockIt = referencedInterfaceBlocks.begin();
+         interfaceBlockIt != referencedInterfaceBlocks.end(); interfaceBlockIt++)
+    {
+        const TType &nodeType = interfaceBlockIt->second->getType();
+        const TInterfaceBlock &interfaceBlock = *nodeType.getInterfaceBlock();
+
+        unsigned int arraySize = static_cast<unsigned int>(interfaceBlock.arraySize());
+        unsigned int activeRegister = mInterfaceBlockRegister;
+
+        mInterfaceBlockRegisterMap[interfaceBlock.name().c_str()] = activeRegister;
+        mInterfaceBlockRegister += std::max(1u, arraySize);
+
+        // FIXME: interface block field names
+
+        if (interfaceBlock.hasInstanceName())
+        {
+            interfaceBlocks += interfaceBlockStructString(interfaceBlock);
+        }
+
+        if (arraySize > 0)
+        {
+            for (unsigned int arrayIndex = 0; arrayIndex < arraySize; arrayIndex++)
+            {
+                interfaceBlocks += interfaceBlockString(interfaceBlock, activeRegister + arrayIndex, arrayIndex);
+            }
+        }
+        else
+        {
+            interfaceBlocks += interfaceBlockString(interfaceBlock, activeRegister, GL_INVALID_INDEX);
+        }
+    }
+
+    return (interfaceBlocks.empty() ? "" : ("// Interface Blocks\n\n" + interfaceBlocks));
+}
+
+TString UniformHLSL::interfaceBlockString(const TInterfaceBlock &interfaceBlock, unsigned int registerIndex, unsigned int arrayIndex)
+{
+    const TString &arrayIndexString =  (arrayIndex != GL_INVALID_INDEX ? Decorate(str(arrayIndex)) : "");
+    const TString &blockName = interfaceBlock.name() + arrayIndexString;
+    TString hlsl;
+
+    hlsl += "cbuffer " + blockName + " : register(b" + str(registerIndex) + ")\n"
+            "{\n";
+
+    if (interfaceBlock.hasInstanceName())
+    {
+        hlsl += "    " + InterfaceBlockStructName(interfaceBlock) + " " +
+                interfaceBlockInstanceString(interfaceBlock, arrayIndex) + ";\n";
+    }
+    else
+    {
+        const TLayoutBlockStorage blockStorage = interfaceBlock.blockStorage();
+        hlsl += interfaceBlockMembersString(interfaceBlock, blockStorage);
+    }
+
+    hlsl += "};\n\n";
+
+    return hlsl;
+}
+
+TString UniformHLSL::interfaceBlockInstanceString(const TInterfaceBlock& interfaceBlock, unsigned int arrayIndex)
+{
+    if (!interfaceBlock.hasInstanceName())
+    {
+        return "";
+    }
+    else if (interfaceBlock.isArray())
+    {
+        return DecoratePrivate(interfaceBlock.instanceName()) + "_" + str(arrayIndex);
+    }
+    else
+    {
+        return Decorate(interfaceBlock.instanceName());
+    }
+}
+
+TString UniformHLSL::interfaceBlockMembersString(const TInterfaceBlock &interfaceBlock, TLayoutBlockStorage blockStorage)
+{
+    TString hlsl;
+
+    Std140PaddingHelper padHelper = mStructureHLSL->getPaddingHelper();
+
+    for (unsigned int typeIndex = 0; typeIndex < interfaceBlock.fields().size(); typeIndex++)
+    {
+        const TField &field = *interfaceBlock.fields()[typeIndex];
+        const TType &fieldType = *field.type();
+
+        if (blockStorage == EbsStd140)
+        {
+            // 2 and 3 component vector types in some cases need pre-padding
+            hlsl += padHelper.prePaddingString(fieldType);
+        }
+
+        hlsl += "    " + InterfaceBlockFieldTypeString(field, blockStorage) +
+                " " + Decorate(field.name()) + ArrayString(fieldType) + ";\n";
+
+        // must pad out after matrices and arrays, where HLSL usually allows itself room to pack stuff
+        if (blockStorage == EbsStd140)
+        {
+            const bool useHLSLRowMajorPacking = (fieldType.getLayoutQualifier().matrixPacking == EmpColumnMajor);
+            hlsl += padHelper.postPaddingString(fieldType, useHLSLRowMajorPacking);
+        }
+    }
+
+    return hlsl;
+}
+
+TString UniformHLSL::interfaceBlockStructString(const TInterfaceBlock &interfaceBlock)
+{
+    const TLayoutBlockStorage blockStorage = interfaceBlock.blockStorage();
+
+    return "struct " + InterfaceBlockStructName(interfaceBlock) + "\n"
+           "{\n" +
+           interfaceBlockMembersString(interfaceBlock, blockStorage) +
+           "};\n\n";
+}
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/UniformHLSL.h b/src/3rdparty/angle/src/compiler/translator/UniformHLSL.h
new file mode 100644
index 0000000000..91fa51588b
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/UniformHLSL.h
@@ -0,0 +1,63 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// UniformHLSL.h:
+//   Methods for GLSL to HLSL translation for uniforms and interface blocks.
+//
+
+#ifndef TRANSLATOR_UNIFORMHLSL_H_
+#define TRANSLATOR_UNIFORMHLSL_H_
+
+#include "compiler/translator/Types.h"
+
+namespace sh
+{
+class StructureHLSL;
+
+class UniformHLSL
+{
+  public:
+    UniformHLSL(StructureHLSL *structureHLSL, TranslatorHLSL *translator);
+
+    void reserveUniformRegisters(unsigned int registerCount);
+    void reserveInterfaceBlockRegisters(unsigned int registerCount);
+    TString uniformsHeader(ShShaderOutput outputType, const ReferencedSymbols &referencedUniforms);
+    TString interfaceBlocksHeader(const ReferencedSymbols &referencedInterfaceBlocks);
+
+    // Used for direct index references
+    static TString interfaceBlockInstanceString(const TInterfaceBlock& interfaceBlock, unsigned int arrayIndex);
+
+    const std::map<std::string, unsigned int> &getInterfaceBlockRegisterMap() const
+    {
+        return mInterfaceBlockRegisterMap;
+    }
+    const std::map<std::string, unsigned int> &getUniformRegisterMap() const
+    {
+        return mUniformRegisterMap;
+    }
+
+  private:
+    TString interfaceBlockString(const TInterfaceBlock &interfaceBlock, unsigned int registerIndex, unsigned int arrayIndex);
+    TString interfaceBlockMembersString(const TInterfaceBlock &interfaceBlock, TLayoutBlockStorage blockStorage);
+    TString interfaceBlockStructString(const TInterfaceBlock &interfaceBlock);
+    const Uniform *findUniformByName(const TString &name) const;
+
+    // Returns the uniform's register index
+    unsigned int declareUniformAndAssignRegister(const TType &type, const TString &name);
+
+    unsigned int mUniformRegister;
+    unsigned int mInterfaceBlockRegister;
+    unsigned int mSamplerRegister;
+    StructureHLSL *mStructureHLSL;
+    ShShaderOutput mOutputType;
+
+    const std::vector<Uniform> &mUniforms;
+    std::map<std::string, unsigned int> mInterfaceBlockRegisterMap;
+    std::map<std::string, unsigned int> mUniformRegisterMap;
+};
+
+}
+
+#endif // TRANSLATOR_UNIFORMHLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/UtilsHLSL.cpp b/src/3rdparty/angle/src/compiler/translator/UtilsHLSL.cpp
new file mode 100644
index 0000000000..de0c36ca65
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/UtilsHLSL.cpp
@@ -0,0 +1,243 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// UtilsHLSL.cpp:
+//   Utility methods for GLSL to HLSL translation.
+//
+
+#include "compiler/translator/UtilsHLSL.h"
+#include "compiler/translator/StructureHLSL.h"
+#include "compiler/translator/SymbolTable.h"
+
+namespace sh
+{
+
+TString SamplerString(const TType &type)
+{
+    if (IsShadowSampler(type.getBasicType()))
+    {
+        return "SamplerComparisonState";
+    }
+    else
+    {
+        return "SamplerState";
+    }
+}
+
+TString TextureString(const TType &type)
+{
+    switch (type.getBasicType())
+    {
+      case EbtSampler2D:            return "Texture2D";
+      case EbtSamplerCube:          return "TextureCube";
+      case EbtSamplerExternalOES:   return "Texture2D";
+      case EbtSampler2DArray:       return "Texture2DArray";
+      case EbtSampler3D:            return "Texture3D";
+      case EbtISampler2D:           return "Texture2D<int4>";
+      case EbtISampler3D:           return "Texture3D<int4>";
+      case EbtISamplerCube:         return "Texture2DArray<int4>";
+      case EbtISampler2DArray:      return "Texture2DArray<int4>";
+      case EbtUSampler2D:           return "Texture2D<uint4>";
+      case EbtUSampler3D:           return "Texture3D<uint4>";
+      case EbtUSamplerCube:         return "Texture2DArray<uint4>";
+      case EbtUSampler2DArray:      return "Texture2DArray<uint4>";
+      case EbtSampler2DShadow:      return "Texture2D";
+      case EbtSamplerCubeShadow:    return "TextureCube";
+      case EbtSampler2DArrayShadow: return "Texture2DArray";
+      default: UNREACHABLE();
+    }
+
+    return "<unknown texture type>";
+}
+
+TString DecorateUniform(const TString &string, const TType &type)
+{
+    if (type.getBasicType() == EbtSamplerExternalOES)
+    {
+        return "ex_" + string;
+    }
+
+    return Decorate(string);
+}
+
+TString DecorateField(const TString &string, const TStructure &structure)
+{
+    if (structure.name().compare(0, 3, "gl_") != 0)
+    {
+        return Decorate(string);
+    }
+
+    return string;
+}
+
+TString DecoratePrivate(const TString &privateText)
+{
+    return "dx_" + privateText;
+}
+
+TString Decorate(const TString &string)
+{
+    if (string.compare(0, 3, "gl_") != 0)
+    {
+        return "_" + string;
+    }
+
+    return string;
+}
+
+TString TypeString(const TType &type)
+{
+    const TStructure* structure = type.getStruct();
+    if (structure)
+    {
+        const TString& typeName = structure->name();
+        if (typeName != "")
+        {
+            return StructNameString(*structure);
+        }
+        else   // Nameless structure, define in place
+        {
+            return StructureHLSL::defineNameless(*structure);
+        }
+    }
+    else if (type.isMatrix())
+    {
+        int cols = type.getCols();
+        int rows = type.getRows();
+        return "float" + str(cols) + "x" + str(rows);
+    }
+    else
+    {
+        switch (type.getBasicType())
+        {
+          case EbtFloat:
+            switch (type.getNominalSize())
+            {
+              case 1: return "float";
+              case 2: return "float2";
+              case 3: return "float3";
+              case 4: return "float4";
+            }
+          case EbtInt:
+            switch (type.getNominalSize())
+            {
+              case 1: return "int";
+              case 2: return "int2";
+              case 3: return "int3";
+              case 4: return "int4";
+            }
+          case EbtUInt:
+            switch (type.getNominalSize())
+            {
+              case 1: return "uint";
+              case 2: return "uint2";
+              case 3: return "uint3";
+              case 4: return "uint4";
+            }
+          case EbtBool:
+            switch (type.getNominalSize())
+            {
+              case 1: return "bool";
+              case 2: return "bool2";
+              case 3: return "bool3";
+              case 4: return "bool4";
+            }
+          case EbtVoid:
+            return "void";
+          case EbtSampler2D:
+          case EbtISampler2D:
+          case EbtUSampler2D:
+          case EbtSampler2DArray:
+          case EbtISampler2DArray:
+          case EbtUSampler2DArray:
+            return "sampler2D";
+          case EbtSamplerCube:
+          case EbtISamplerCube:
+          case EbtUSamplerCube:
+            return "samplerCUBE";
+          case EbtSamplerExternalOES:
+            return "sampler2D";
+          default:
+            break;
+        }
+    }
+
+    UNREACHABLE();
+    return "<unknown type>";
+}
+
+TString StructNameString(const TStructure &structure)
+{
+    if (structure.name().empty())
+    {
+        return "";
+    }
+
+    return "ss" + str(structure.uniqueId()) + "_" + structure.name();
+}
+
+TString QualifiedStructNameString(const TStructure &structure, bool useHLSLRowMajorPacking,
+                                  bool useStd140Packing)
+{
+    if (structure.name() == "")
+    {
+        return "";
+    }
+
+    TString prefix = "";
+
+    // Structs packed with row-major matrices in HLSL are prefixed with "rm"
+    // GLSL column-major maps to HLSL row-major, and the converse is true
+
+    if (useStd140Packing)
+    {
+        prefix += "std_";
+    }
+
+    if (useHLSLRowMajorPacking)
+    {
+        prefix += "rm_";
+    }
+
+    return prefix + StructNameString(structure);
+}
+
+TString InterpolationString(TQualifier qualifier)
+{
+    switch (qualifier)
+    {
+      case EvqVaryingIn:           return "";
+      case EvqFragmentIn:          return "";
+      case EvqInvariantVaryingIn:  return "";
+      case EvqSmoothIn:            return "linear";
+      case EvqFlatIn:              return "nointerpolation";
+      case EvqCentroidIn:          return "centroid";
+      case EvqVaryingOut:          return "";
+      case EvqVertexOut:           return "";
+      case EvqInvariantVaryingOut: return "";
+      case EvqSmoothOut:           return "linear";
+      case EvqFlatOut:             return "nointerpolation";
+      case EvqCentroidOut:         return "centroid";
+      default: UNREACHABLE();
+    }
+
+    return "";
+}
+
+TString QualifierString(TQualifier qualifier)
+{
+    switch (qualifier)
+    {
+      case EvqIn:            return "in";
+      case EvqOut:           return "inout"; // 'out' results in an HLSL error if not all fields are written, for GLSL it's undefined
+      case EvqInOut:         return "inout";
+      case EvqConstReadOnly: return "const";
+      default: UNREACHABLE();
+    }
+
+    return "";
+}
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/UtilsHLSL.h b/src/3rdparty/angle/src/compiler/translator/UtilsHLSL.h
new file mode 100644
index 0000000000..aaa3ddf5d2
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/UtilsHLSL.h
@@ -0,0 +1,37 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// UtilsHLSL.h:
+//   Utility methods for GLSL to HLSL translation.
+//
+
+#ifndef TRANSLATOR_UTILSHLSL_H_
+#define TRANSLATOR_UTILSHLSL_H_
+
+#include <vector>
+#include "compiler/translator/Types.h"
+
+#include "angle_gl.h"
+
+namespace sh
+{
+
+TString TextureString(const TType &type);
+TString SamplerString(const TType &type);
+// Prepends an underscore to avoid naming clashes
+TString Decorate(const TString &string);
+TString DecorateUniform(const TString &string, const TType &type);
+TString DecorateField(const TString &string, const TStructure &structure);
+TString DecoratePrivate(const TString &privateText);
+TString TypeString(const TType &type);
+TString StructNameString(const TStructure &structure);
+TString QualifiedStructNameString(const TStructure &structure, bool useHLSLRowMajorPacking,
+                                  bool useStd140Packing);
+TString InterpolationString(TQualifier qualifier);
+TString QualifierString(TQualifier qualifier);
+
+}
+
+#endif // TRANSLATOR_UTILSHLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.cpp b/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.cpp
index 3c2cc41cda..c1a7b7524f 100644
--- a/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -8,26 +8,10 @@
 #include "compiler/translator/InfoSink.h"
 #include "compiler/translator/InitializeParseContext.h"
 #include "compiler/translator/ParseContext.h"
+#include "angle_gl.h"
 
-namespace {
-bool IsLoopIndex(const TIntermSymbol* symbol, const TLoopStack& stack) {
-    for (TLoopStack::const_iterator i = stack.begin(); i != stack.end(); ++i) {
-        if (i->index.id == symbol->getId())
-            return true;
-    }
-    return false;
-}
-
-void MarkLoopForUnroll(const TIntermSymbol* symbol, TLoopStack& stack) {
-    for (TLoopStack::iterator i = stack.begin(); i != stack.end(); ++i) {
-        if (i->index.id == symbol->getId()) {
-            ASSERT(i->loop != NULL);
-            i->loop->setUnrollFlag(true);
-            return;
-        }
-    }
-    UNREACHABLE();
-}
+namespace
+{
 
 // Traverses a node to check if it represents a constant index expression.
 // Definition:
@@ -38,110 +22,146 @@ void MarkLoopForUnroll(const TIntermSymbol* symbol, TLoopStack& stack) {
 // - Constant expressions
 // - Loop indices as defined in section 4
 // - Expressions composed of both of the above
-class ValidateConstIndexExpr : public TIntermTraverser {
-public:
-    ValidateConstIndexExpr(const TLoopStack& stack)
+class ValidateConstIndexExpr : public TIntermTraverser
+{
+  public:
+    ValidateConstIndexExpr(TLoopStack& stack)
         : mValid(true), mLoopStack(stack) {}
 
     // Returns true if the parsed node represents a constant index expression.
     bool isValid() const { return mValid; }
 
-    virtual void visitSymbol(TIntermSymbol* symbol) {
+    virtual void visitSymbol(TIntermSymbol *symbol)
+    {
         // Only constants and loop indices are allowed in a
         // constant index expression.
-        if (mValid) {
+        if (mValid)
+        {
             mValid = (symbol->getQualifier() == EvqConst) ||
-                     IsLoopIndex(symbol, mLoopStack);
+                     (mLoopStack.findLoop(symbol));
         }
     }
 
-private:
+  private:
     bool mValid;
-    const TLoopStack& mLoopStack;
+    TLoopStack& mLoopStack;
 };
 
-// Traverses a node to check if it uses a loop index.
-// If an int loop index is used in its body as a sampler array index,
-// mark the loop for unroll.
-class ValidateLoopIndexExpr : public TIntermTraverser {
-public:
-    ValidateLoopIndexExpr(TLoopStack& stack)
-        : mUsesFloatLoopIndex(false),
-          mUsesIntLoopIndex(false),
-          mLoopStack(stack) {}
-
-    bool usesFloatLoopIndex() const { return mUsesFloatLoopIndex; }
-    bool usesIntLoopIndex() const { return mUsesIntLoopIndex; }
-
-    virtual void visitSymbol(TIntermSymbol* symbol) {
-        if (IsLoopIndex(symbol, mLoopStack)) {
-            switch (symbol->getBasicType()) {
-              case EbtFloat:
-                mUsesFloatLoopIndex = true;
-                break;
-              case EbtInt:
-                mUsesIntLoopIndex = true;
-                MarkLoopForUnroll(symbol, mLoopStack);
-                break;
-              default:
-                UNREACHABLE();
-            }
-        }
+const char *GetOperatorString(TOperator op)
+{
+    switch (op)
+    {
+      case EOpInitialize: return "=";
+      case EOpAssign: return "=";
+      case EOpAddAssign: return "+=";
+      case EOpSubAssign: return "-=";
+      case EOpDivAssign: return "/=";
+
+      // Fall-through.
+      case EOpMulAssign:
+      case EOpVectorTimesMatrixAssign:
+      case EOpVectorTimesScalarAssign:
+      case EOpMatrixTimesScalarAssign:
+      case EOpMatrixTimesMatrixAssign: return "*=";
+
+      // Fall-through.
+      case EOpIndexDirect:
+      case EOpIndexIndirect: return "[]";
+
+      case EOpIndexDirectStruct:
+      case EOpIndexDirectInterfaceBlock: return ".";
+      case EOpVectorSwizzle: return ".";
+      case EOpAdd: return "+";
+      case EOpSub: return "-";
+      case EOpMul: return "*";
+      case EOpDiv: return "/";
+      case EOpMod: UNIMPLEMENTED(); break;
+      case EOpEqual: return "==";
+      case EOpNotEqual: return "!=";
+      case EOpLessThan: return "<";
+      case EOpGreaterThan: return ">";
+      case EOpLessThanEqual: return "<=";
+      case EOpGreaterThanEqual: return ">=";
+
+      // Fall-through.
+      case EOpVectorTimesScalar:
+      case EOpVectorTimesMatrix:
+      case EOpMatrixTimesVector:
+      case EOpMatrixTimesScalar:
+      case EOpMatrixTimesMatrix: return "*";
+
+      case EOpLogicalOr: return "||";
+      case EOpLogicalXor: return "^^";
+      case EOpLogicalAnd: return "&&";
+      case EOpNegative: return "-";
+      case EOpVectorLogicalNot: return "not";
+      case EOpLogicalNot: return "!";
+      case EOpPostIncrement: return "++";
+      case EOpPostDecrement: return "--";
+      case EOpPreIncrement: return "++";
+      case EOpPreDecrement: return "--";
+
+      case EOpRadians: return "radians";
+      case EOpDegrees: return "degrees";
+      case EOpSin: return "sin";
+      case EOpCos: return "cos";
+      case EOpTan: return "tan";
+      case EOpAsin: return "asin";
+      case EOpAcos: return "acos";
+      case EOpAtan: return "atan";
+      case EOpExp: return "exp";
+      case EOpLog: return "log";
+      case EOpExp2: return "exp2";
+      case EOpLog2: return "log2";
+      case EOpSqrt: return "sqrt";
+      case EOpInverseSqrt: return "inversesqrt";
+      case EOpAbs: return "abs";
+      case EOpSign: return "sign";
+      case EOpFloor: return "floor";
+      case EOpCeil: return "ceil";
+      case EOpFract: return "fract";
+      case EOpLength: return "length";
+      case EOpNormalize: return "normalize";
+      case EOpDFdx: return "dFdx";
+      case EOpDFdy: return "dFdy";
+      case EOpFwidth: return "fwidth";
+      case EOpAny: return "any";
+      case EOpAll: return "all";
+
+      default: break;
     }
+    return "";
+}
 
-private:
-    bool mUsesFloatLoopIndex;
-    bool mUsesIntLoopIndex;
-    TLoopStack& mLoopStack;
-};
-}  // namespace
+}  // namespace anonymous
 
-ValidateLimitations::ValidateLimitations(ShShaderType shaderType,
-                                         TInfoSinkBase& sink)
+ValidateLimitations::ValidateLimitations(sh::GLenum shaderType,
+                                         TInfoSinkBase &sink)
     : mShaderType(shaderType),
       mSink(sink),
       mNumErrors(0)
 {
 }
 
-bool ValidateLimitations::visitBinary(Visit, TIntermBinary* node)
+bool ValidateLimitations::visitBinary(Visit, TIntermBinary *node)
 {
     // Check if loop index is modified in the loop body.
     validateOperation(node, node->getLeft());
 
     // Check indexing.
-    switch (node->getOp()) {
+    switch (node->getOp())
+    {
       case EOpIndexDirect:
-        validateIndexing(node);
-        break;
       case EOpIndexIndirect:
-#if defined(__APPLE__)
-        // Loop unrolling is a work-around for a Mac Cg compiler bug where it
-        // crashes when a sampler array's index is also the loop index.
-        // Once Apple fixes this bug, we should remove the code in this CL.
-        // See http://codereview.appspot.com/4331048/.
-        if ((node->getLeft() != NULL) && (node->getRight() != NULL) &&
-            (node->getLeft()->getAsSymbolNode())) {
-            TIntermSymbol* symbol = node->getLeft()->getAsSymbolNode();
-            if (IsSampler(symbol->getBasicType()) && symbol->isArray()) {
-                ValidateLoopIndexExpr validate(mLoopStack);
-                node->getRight()->traverse(&validate);
-                if (validate.usesFloatLoopIndex()) {
-                    error(node->getLine(),
-                          "sampler array index is float loop index",
-                          "for");
-                }
-            }
-        }
-#endif
         validateIndexing(node);
         break;
-      default: break;
+      default:
+        break;
     }
     return true;
 }
 
-bool ValidateLimitations::visitUnary(Visit, TIntermUnary* node)
+bool ValidateLimitations::visitUnary(Visit, TIntermUnary *node)
 {
     // Check if loop index is modified in the loop body.
     validateOperation(node, node->getOperand());
@@ -149,7 +169,7 @@ bool ValidateLimitations::visitUnary(Visit, TIntermUnary* node)
     return true;
 }
 
-bool ValidateLimitations::visitAggregate(Visit, TIntermAggregate* node)
+bool ValidateLimitations::visitAggregate(Visit, TIntermAggregate *node)
 {
     switch (node->getOp()) {
       case EOpFunctionCall:
@@ -161,22 +181,20 @@ bool ValidateLimitations::visitAggregate(Visit, TIntermAggregate* node)
     return true;
 }
 
-bool ValidateLimitations::visitLoop(Visit, TIntermLoop* node)
+bool ValidateLimitations::visitLoop(Visit, TIntermLoop *node)
 {
     if (!validateLoopType(node))
         return false;
 
-    TLoopInfo info;
-    memset(&info, 0, sizeof(TLoopInfo));
-    info.loop = node;
-    if (!validateForLoopHeader(node, &info))
+    if (!validateForLoopHeader(node))
         return false;
 
-    TIntermNode* body = node->getBody();
-    if (body != NULL) {
-        mLoopStack.push_back(info);
+    TIntermNode *body = node->getBody();
+    if (body != NULL)
+    {
+        mLoopStack.push(node);
         body->traverse(this);
-        mLoopStack.pop_back();
+        mLoopStack.pop();
     }
 
     // The loop is fully processed - no need to visit children.
@@ -184,7 +202,7 @@ bool ValidateLimitations::visitLoop(Visit, TIntermLoop* node)
 }
 
 void ValidateLimitations::error(TSourceLoc loc,
-                                const char *reason, const char* token)
+                                const char *reason, const char *token)
 {
     mSink.prefix(EPrefixError);
     mSink.location(loc);
@@ -197,12 +215,13 @@ bool ValidateLimitations::withinLoopBody() const
     return !mLoopStack.empty();
 }
 
-bool ValidateLimitations::isLoopIndex(const TIntermSymbol* symbol) const
+bool ValidateLimitations::isLoopIndex(TIntermSymbol *symbol)
 {
-    return IsLoopIndex(symbol, mLoopStack);
+    return mLoopStack.findLoop(symbol) != NULL;
 }
 
-bool ValidateLimitations::validateLoopType(TIntermLoop* node) {
+bool ValidateLimitations::validateLoopType(TIntermLoop *node)
+{
     TLoopType type = node->getType();
     if (type == ELoopFor)
         return true;
@@ -214,8 +233,7 @@ bool ValidateLimitations::validateLoopType(TIntermLoop* node) {
     return false;
 }
 
-bool ValidateLimitations::validateForLoopHeader(TIntermLoop* node,
-                                                TLoopInfo* info)
+bool ValidateLimitations::validateForLoopHeader(TIntermLoop *node)
 {
     ASSERT(node->getType() == ELoopFor);
 
@@ -223,74 +241,80 @@ bool ValidateLimitations::validateForLoopHeader(TIntermLoop* node,
     // The for statement has the form:
     //    for ( init-declaration ; condition ; expression ) statement
     //
-    if (!validateForLoopInit(node, info))
+    int indexSymbolId = validateForLoopInit(node);
+    if (indexSymbolId < 0)
         return false;
-    if (!validateForLoopCond(node, info))
+    if (!validateForLoopCond(node, indexSymbolId))
         return false;
-    if (!validateForLoopExpr(node, info))
+    if (!validateForLoopExpr(node, indexSymbolId))
         return false;
 
     return true;
 }
 
-bool ValidateLimitations::validateForLoopInit(TIntermLoop* node,
-                                              TLoopInfo* info)
+int ValidateLimitations::validateForLoopInit(TIntermLoop *node)
 {
-    TIntermNode* init = node->getInit();
-    if (init == NULL) {
+    TIntermNode *init = node->getInit();
+    if (init == NULL)
+    {
         error(node->getLine(), "Missing init declaration", "for");
-        return false;
+        return -1;
     }
 
     //
     // init-declaration has the form:
     //     type-specifier identifier = constant-expression
     //
-    TIntermAggregate* decl = init->getAsAggregate();
-    if ((decl == NULL) || (decl->getOp() != EOpDeclaration)) {
+    TIntermAggregate *decl = init->getAsAggregate();
+    if ((decl == NULL) || (decl->getOp() != EOpDeclaration))
+    {
         error(init->getLine(), "Invalid init declaration", "for");
-        return false;
+        return -1;
     }
     // To keep things simple do not allow declaration list.
-    TIntermSequence& declSeq = decl->getSequence();
-    if (declSeq.size() != 1) {
+    TIntermSequence *declSeq = decl->getSequence();
+    if (declSeq->size() != 1)
+    {
         error(decl->getLine(), "Invalid init declaration", "for");
-        return false;
+        return -1;
     }
-    TIntermBinary* declInit = declSeq[0]->getAsBinaryNode();
-    if ((declInit == NULL) || (declInit->getOp() != EOpInitialize)) {
+    TIntermBinary *declInit = (*declSeq)[0]->getAsBinaryNode();
+    if ((declInit == NULL) || (declInit->getOp() != EOpInitialize))
+    {
         error(decl->getLine(), "Invalid init declaration", "for");
-        return false;
+        return -1;
     }
-    TIntermSymbol* symbol = declInit->getLeft()->getAsSymbolNode();
-    if (symbol == NULL) {
+    TIntermSymbol *symbol = declInit->getLeft()->getAsSymbolNode();
+    if (symbol == NULL)
+    {
         error(declInit->getLine(), "Invalid init declaration", "for");
-        return false;
+        return -1;
     }
     // The loop index has type int or float.
     TBasicType type = symbol->getBasicType();
-    if ((type != EbtInt) && (type != EbtFloat)) {
+    if ((type != EbtInt) && (type != EbtUInt) && (type != EbtFloat)) {
         error(symbol->getLine(),
               "Invalid type for loop index", getBasicString(type));
-        return false;
+        return -1;
     }
     // The loop index is initialized with constant expression.
-    if (!isConstExpr(declInit->getRight())) {
+    if (!isConstExpr(declInit->getRight()))
+    {
         error(declInit->getLine(),
               "Loop index cannot be initialized with non-constant expression",
               symbol->getSymbol().c_str());
-        return false;
+        return -1;
     }
 
-    info->index.id = symbol->getId();
-    return true;
+    return symbol->getId();
 }
 
-bool ValidateLimitations::validateForLoopCond(TIntermLoop* node,
-                                              TLoopInfo* info)
+bool ValidateLimitations::validateForLoopCond(TIntermLoop *node,
+                                              int indexSymbolId)
 {
-    TIntermNode* cond = node->getCondition();
-    if (cond == NULL) {
+    TIntermNode *cond = node->getCondition();
+    if (cond == NULL)
+    {
         error(node->getLine(), "Missing condition", "for");
         return false;
     }
@@ -298,24 +322,28 @@ bool ValidateLimitations::validateForLoopCond(TIntermLoop* node,
     // condition has the form:
     //     loop_index relational_operator constant_expression
     //
-    TIntermBinary* binOp = cond->getAsBinaryNode();
-    if (binOp == NULL) {
+    TIntermBinary *binOp = cond->getAsBinaryNode();
+    if (binOp == NULL)
+    {
         error(node->getLine(), "Invalid condition", "for");
         return false;
     }
     // Loop index should be to the left of relational operator.
-    TIntermSymbol* symbol = binOp->getLeft()->getAsSymbolNode();
-    if (symbol == NULL) {
+    TIntermSymbol *symbol = binOp->getLeft()->getAsSymbolNode();
+    if (symbol == NULL)
+    {
         error(binOp->getLine(), "Invalid condition", "for");
         return false;
     }
-    if (symbol->getId() != info->index.id) {
+    if (symbol->getId() != indexSymbolId)
+    {
         error(symbol->getLine(),
               "Expected loop index", symbol->getSymbol().c_str());
         return false;
     }
     // Relational operator is one of: > >= < <= == or !=.
-    switch (binOp->getOp()) {
+    switch (binOp->getOp())
+    {
       case EOpEqual:
       case EOpNotEqual:
       case EOpLessThan:
@@ -326,11 +354,12 @@ bool ValidateLimitations::validateForLoopCond(TIntermLoop* node,
       default:
         error(binOp->getLine(),
               "Invalid relational operator",
-              getOperatorString(binOp->getOp()));
+              GetOperatorString(binOp->getOp()));
         break;
     }
     // Loop index must be compared with a constant.
-    if (!isConstExpr(binOp->getRight())) {
+    if (!isConstExpr(binOp->getRight()))
+    {
         error(binOp->getLine(),
               "Loop index cannot be compared with non-constant expression",
               symbol->getSymbol().c_str());
@@ -340,11 +369,12 @@ bool ValidateLimitations::validateForLoopCond(TIntermLoop* node,
     return true;
 }
 
-bool ValidateLimitations::validateForLoopExpr(TIntermLoop* node,
-                                              TLoopInfo* info)
+bool ValidateLimitations::validateForLoopExpr(TIntermLoop *node,
+                                              int indexSymbolId)
 {
-    TIntermNode* expr = node->getExpression();
-    if (expr == NULL) {
+    TIntermNode *expr = node->getExpression();
+    if (expr == NULL)
+    {
         error(node->getLine(), "Missing expression", "for");
         return false;
     }
@@ -358,50 +388,58 @@ bool ValidateLimitations::validateForLoopExpr(TIntermLoop* node,
     //     --loop_index
     // The last two forms are not specified in the spec, but I am assuming
     // its an oversight.
-    TIntermUnary* unOp = expr->getAsUnaryNode();
-    TIntermBinary* binOp = unOp ? NULL : expr->getAsBinaryNode();
+    TIntermUnary *unOp = expr->getAsUnaryNode();
+    TIntermBinary *binOp = unOp ? NULL : expr->getAsBinaryNode();
 
     TOperator op = EOpNull;
-    TIntermSymbol* symbol = NULL;
-    if (unOp != NULL) {
+    TIntermSymbol *symbol = NULL;
+    if (unOp != NULL)
+    {
         op = unOp->getOp();
         symbol = unOp->getOperand()->getAsSymbolNode();
-    } else if (binOp != NULL) {
+    }
+    else if (binOp != NULL)
+    {
         op = binOp->getOp();
         symbol = binOp->getLeft()->getAsSymbolNode();
     }
 
     // The operand must be loop index.
-    if (symbol == NULL) {
+    if (symbol == NULL)
+    {
         error(expr->getLine(), "Invalid expression", "for");
         return false;
     }
-    if (symbol->getId() != info->index.id) {
+    if (symbol->getId() != indexSymbolId)
+    {
         error(symbol->getLine(),
               "Expected loop index", symbol->getSymbol().c_str());
         return false;
     }
 
     // The operator is one of: ++ -- += -=.
-    switch (op) {
-        case EOpPostIncrement:
-        case EOpPostDecrement:
-        case EOpPreIncrement:
-        case EOpPreDecrement:
-            ASSERT((unOp != NULL) && (binOp == NULL));
-            break;
-        case EOpAddAssign:
-        case EOpSubAssign:
-            ASSERT((unOp == NULL) && (binOp != NULL));
-            break;
-        default:
-            error(expr->getLine(), "Invalid operator", getOperatorString(op));
-            return false;
+    switch (op)
+    {
+      case EOpPostIncrement:
+      case EOpPostDecrement:
+      case EOpPreIncrement:
+      case EOpPreDecrement:
+        ASSERT((unOp != NULL) && (binOp == NULL));
+        break;
+      case EOpAddAssign:
+      case EOpSubAssign:
+        ASSERT((unOp == NULL) && (binOp != NULL));
+        break;
+      default:
+        error(expr->getLine(), "Invalid operator", GetOperatorString(op));
+        return false;
     }
 
     // Loop index must be incremented/decremented with a constant.
-    if (binOp != NULL) {
-        if (!isConstExpr(binOp->getRight())) {
+    if (binOp != NULL)
+    {
+        if (!isConstExpr(binOp->getRight()))
+        {
             error(binOp->getLine(),
                   "Loop index cannot be modified by non-constant expression",
                   symbol->getSymbol().c_str());
@@ -412,7 +450,7 @@ bool ValidateLimitations::validateForLoopExpr(TIntermLoop* node,
     return true;
 }
 
-bool ValidateLimitations::validateFunctionCall(TIntermAggregate* node)
+bool ValidateLimitations::validateFunctionCall(TIntermAggregate *node)
 {
     ASSERT(node->getOp() == EOpFunctionCall);
 
@@ -423,9 +461,10 @@ bool ValidateLimitations::validateFunctionCall(TIntermAggregate* node)
     // List of param indices for which loop indices are used as argument.
     typedef std::vector<size_t> ParamIndex;
     ParamIndex pIndex;
-    TIntermSequence& params = node->getSequence();
-    for (TIntermSequence::size_type i = 0; i < params.size(); ++i) {
-        TIntermSymbol* symbol = params[i]->getAsSymbolNode();
+    TIntermSequence *params = node->getSequence();
+    for (TIntermSequence::size_type i = 0; i < params->size(); ++i)
+    {
+        TIntermSymbol *symbol = (*params)[i]->getAsSymbolNode();
         if (symbol && isLoopIndex(symbol))
             pIndex.push_back(i);
     }
@@ -436,17 +475,19 @@ bool ValidateLimitations::validateFunctionCall(TIntermAggregate* node)
 
     bool valid = true;
     TSymbolTable& symbolTable = GetGlobalParseContext()->symbolTable;
-    TSymbol* symbol = symbolTable.find(node->getName());
+    TSymbol* symbol = symbolTable.find(node->getName(), GetGlobalParseContext()->shaderVersion);
     ASSERT(symbol && symbol->isFunction());
-    TFunction* function = static_cast<TFunction*>(symbol);
+    TFunction *function = static_cast<TFunction *>(symbol);
     for (ParamIndex::const_iterator i = pIndex.begin();
-         i != pIndex.end(); ++i) {
-        const TParameter& param = function->getParam(*i);
+         i != pIndex.end(); ++i)
+    {
+        const TParameter &param = function->getParam(*i);
         TQualifier qual = param.type->getQualifier();
-        if ((qual == EvqOut) || (qual == EvqInOut)) {
-            error(params[*i]->getLine(),
+        if ((qual == EvqOut) || (qual == EvqInOut))
+        {
+            error((*params)[*i]->getLine(),
                   "Loop index cannot be used as argument to a function out or inout parameter",
-                  params[*i]->getAsSymbolNode()->getSymbol().c_str());
+                  (*params)[*i]->getAsSymbolNode()->getSymbol().c_str());
             valid = false;
         }
     }
@@ -454,14 +495,16 @@ bool ValidateLimitations::validateFunctionCall(TIntermAggregate* node)
     return valid;
 }
 
-bool ValidateLimitations::validateOperation(TIntermOperator* node,
-                                            TIntermNode* operand) {
+bool ValidateLimitations::validateOperation(TIntermOperator *node,
+                                            TIntermNode* operand)
+{
     // Check if loop index is modified in the loop body.
     if (!withinLoopBody() || !node->isAssignment())
         return true;
 
-    const TIntermSymbol* symbol = operand->getAsSymbolNode();
-    if (symbol && isLoopIndex(symbol)) {
+    TIntermSymbol *symbol = operand->getAsSymbolNode();
+    if (symbol && isLoopIndex(symbol))
+    {
         error(node->getLine(),
               "Loop index cannot be statically assigned to within the body of the loop",
               symbol->getSymbol().c_str());
@@ -469,13 +512,13 @@ bool ValidateLimitations::validateOperation(TIntermOperator* node,
     return true;
 }
 
-bool ValidateLimitations::isConstExpr(TIntermNode* node)
+bool ValidateLimitations::isConstExpr(TIntermNode *node)
 {
     ASSERT(node != NULL);
     return node->getAsConstantUnion() != NULL;
 }
 
-bool ValidateLimitations::isConstIndexExpr(TIntermNode* node)
+bool ValidateLimitations::isConstIndexExpr(TIntermNode *node)
 {
     ASSERT(node != NULL);
 
@@ -484,15 +527,15 @@ bool ValidateLimitations::isConstIndexExpr(TIntermNode* node)
     return validate.isValid();
 }
 
-bool ValidateLimitations::validateIndexing(TIntermBinary* node)
+bool ValidateLimitations::validateIndexing(TIntermBinary *node)
 {
     ASSERT((node->getOp() == EOpIndexDirect) ||
            (node->getOp() == EOpIndexIndirect));
 
     bool valid = true;
-    TIntermTyped* index = node->getRight();
+    TIntermTyped *index = node->getRight();
     // The index expression must have integral type.
-    if (!index->isScalar() || (index->getBasicType() != EbtInt)) {
+    if (!index->isScalarInt()) {
         error(index->getLine(),
               "Index expression must have integral type",
               index->getCompleteString().c_str());
@@ -500,10 +543,11 @@ bool ValidateLimitations::validateIndexing(TIntermBinary* node)
     }
     // The index expession must be a constant-index-expression unless
     // the operand is a uniform in a vertex shader.
-    TIntermTyped* operand = node->getLeft();
-    bool skip = (mShaderType == SH_VERTEX_SHADER) &&
+    TIntermTyped *operand = node->getLeft();
+    bool skip = (mShaderType == GL_VERTEX_SHADER) &&
                 (operand->getQualifier() == EvqUniform);
-    if (!skip && !isConstIndexExpr(index)) {
+    if (!skip && !isConstIndexExpr(index))
+    {
         error(index->getLine(), "Index expression must be constant", "[]");
         valid = false;
     }
diff --git a/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.h b/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.h
index 8839dd8b8a..e6e8a9619f 100644
--- a/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.h
+++ b/src/3rdparty/angle/src/compiler/translator/ValidateLimitations.h
@@ -4,55 +4,51 @@
 // found in the LICENSE file.
 //
 
-#include "GLSLANG/ShaderLang.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
+#include "compiler/translator/LoopInfo.h"
 
 class TInfoSinkBase;
 
-struct TLoopInfo {
-    struct TIndex {
-        int id;  // symbol id.
-    } index;
-    TIntermLoop* loop;
-};
-typedef TVector<TLoopInfo> TLoopStack;
-
 // Traverses intermediate tree to ensure that the shader does not exceed the
 // minimum functionality mandated in GLSL 1.0 spec, Appendix A.
-class ValidateLimitations : public TIntermTraverser {
-public:
-    ValidateLimitations(ShShaderType shaderType, TInfoSinkBase& sink);
+class ValidateLimitations : public TIntermTraverser
+{
+  public:
+    ValidateLimitations(sh::GLenum shaderType, TInfoSinkBase &sink);
 
     int numErrors() const { return mNumErrors; }
 
-    virtual bool visitBinary(Visit, TIntermBinary*);
-    virtual bool visitUnary(Visit, TIntermUnary*);
-    virtual bool visitAggregate(Visit, TIntermAggregate*);
-    virtual bool visitLoop(Visit, TIntermLoop*);
+    virtual bool visitBinary(Visit, TIntermBinary *);
+    virtual bool visitUnary(Visit, TIntermUnary *);
+    virtual bool visitAggregate(Visit, TIntermAggregate *);
+    virtual bool visitLoop(Visit, TIntermLoop *);
 
-private:
-    void error(TSourceLoc loc, const char *reason, const char* token);
+  private:
+    void error(TSourceLoc loc, const char *reason, const char *token);
 
     bool withinLoopBody() const;
-    bool isLoopIndex(const TIntermSymbol* symbol) const;
-    bool validateLoopType(TIntermLoop* node);
-    bool validateForLoopHeader(TIntermLoop* node, TLoopInfo* info);
-    bool validateForLoopInit(TIntermLoop* node, TLoopInfo* info);
-    bool validateForLoopCond(TIntermLoop* node, TLoopInfo* info);
-    bool validateForLoopExpr(TIntermLoop* node, TLoopInfo* info);
+    bool isLoopIndex(TIntermSymbol *symbol);
+    bool validateLoopType(TIntermLoop *node);
+
+    bool validateForLoopHeader(TIntermLoop *node);
+    // If valid, return the index symbol id; Otherwise, return -1.
+    int validateForLoopInit(TIntermLoop *node);
+    bool validateForLoopCond(TIntermLoop *node, int indexSymbolId);
+    bool validateForLoopExpr(TIntermLoop *node, int indexSymbolId);
+
     // Returns true if none of the loop indices is used as the argument to
     // the given function out or inout parameter.
-    bool validateFunctionCall(TIntermAggregate* node);
-    bool validateOperation(TIntermOperator* node, TIntermNode* operand);
+    bool validateFunctionCall(TIntermAggregate *node);
+    bool validateOperation(TIntermOperator *node, TIntermNode *operand);
 
     // Returns true if indexing does not exceed the minimum functionality
     // mandated in GLSL 1.0 spec, Appendix A, Section 5.
-    bool isConstExpr(TIntermNode* node);
-    bool isConstIndexExpr(TIntermNode* node);
-    bool validateIndexing(TIntermBinary* node);
+    bool isConstExpr(TIntermNode *node);
+    bool isConstIndexExpr(TIntermNode *node);
+    bool validateIndexing(TIntermBinary *node);
 
-    ShShaderType mShaderType;
-    TInfoSinkBase& mSink;
+    sh::GLenum mShaderType;
+    TInfoSinkBase &mSink;
     int mNumErrors;
     TLoopStack mLoopStack;
 };
diff --git a/src/3rdparty/angle/src/compiler/translator/ValidateOutputs.cpp b/src/3rdparty/angle/src/compiler/translator/ValidateOutputs.cpp
new file mode 100644
index 0000000000..ac1c10d6b0
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/ValidateOutputs.cpp
@@ -0,0 +1,78 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "compiler/translator/ValidateOutputs.h"
+#include "compiler/translator/InfoSink.h"
+#include "compiler/translator/InitializeParseContext.h"
+#include "compiler/translator/ParseContext.h"
+
+ValidateOutputs::ValidateOutputs(TInfoSinkBase& sink, int maxDrawBuffers)
+    : mSink(sink),
+      mMaxDrawBuffers(maxDrawBuffers),
+      mNumErrors(0),
+      mHasUnspecifiedOutputLocation(false)
+{
+}
+
+void ValidateOutputs::visitSymbol(TIntermSymbol *symbol)
+{
+    TString name = symbol->getSymbol();
+    TQualifier qualifier = symbol->getQualifier();
+
+    if (mVisitedSymbols.count(name) == 1)
+        return;
+
+    mVisitedSymbols.insert(name);
+
+    if (qualifier == EvqFragmentOut)
+    {
+        const TType &type = symbol->getType();
+        const int location = type.getLayoutQualifier().location;
+
+        if (mHasUnspecifiedOutputLocation)
+        {
+            error(symbol->getLine(), "must explicitly specify all locations when using multiple fragment outputs", name.c_str());
+        }
+        else if (location == -1)
+        {
+            mHasUnspecifiedOutputLocation = true;
+        }
+        else
+        {
+            OutputMap::iterator mapEntry = mOutputMap.find(location);
+            if (mapEntry == mOutputMap.end())
+            {
+                const int elementCount = type.isArray() ? type.getArraySize() : 1;
+                if (location + elementCount > mMaxDrawBuffers)
+                {
+                    error(symbol->getLine(), "output location must be < MAX_DRAW_BUFFERS", name.c_str());
+                }
+
+                for (int elementIndex = 0; elementIndex < elementCount; elementIndex++)
+                {
+                    const int offsetLocation = location + elementIndex;
+                    mOutputMap[offsetLocation] = symbol;
+                }
+            }
+            else
+            {
+                std::stringstream strstr;
+                strstr << "conflicting output locations with previously defined output '"
+                       << mapEntry->second->getSymbol() << "'";
+
+                error(symbol->getLine(), strstr.str().c_str(), name.c_str());
+            }
+        }
+    }
+}
+
+void ValidateOutputs::error(TSourceLoc loc, const char *reason, const char* token)
+{
+    mSink.prefix(EPrefixError);
+    mSink.location(loc);
+    mSink << "'" << token << "' : " << reason << "\n";
+    mNumErrors++;
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/ValidateOutputs.h b/src/3rdparty/angle/src/compiler/translator/ValidateOutputs.h
new file mode 100644
index 0000000000..0f808dbb97
--- /dev/null
+++ b/src/3rdparty/angle/src/compiler/translator/ValidateOutputs.h
@@ -0,0 +1,33 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "compiler/translator/IntermNode.h"
+
+#include <set>
+
+class TInfoSinkBase;
+
+class ValidateOutputs : public TIntermTraverser
+{
+  public:
+    ValidateOutputs(TInfoSinkBase& sink, int maxDrawBuffers);
+
+    int numErrors() const { return mNumErrors; }
+
+    virtual void visitSymbol(TIntermSymbol*);
+
+  private:
+    TInfoSinkBase& mSink;
+    int mMaxDrawBuffers;
+    int mNumErrors;
+    bool mHasUnspecifiedOutputLocation;
+
+    typedef std::map<int, TIntermSymbol*> OutputMap;
+    OutputMap mOutputMap;
+    std::set<TString> mVisitedSymbols;
+
+    void error(TSourceLoc loc, const char *reason, const char* token);
+};
diff --git a/src/3rdparty/angle/src/compiler/translator/VariableInfo.cpp b/src/3rdparty/angle/src/compiler/translator/VariableInfo.cpp
index ef888aff11..f26c1566ac 100644
--- a/src/3rdparty/angle/src/compiler/translator/VariableInfo.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/VariableInfo.cpp
@@ -1,196 +1,142 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
+#include "angle_gl.h"
 #include "compiler/translator/VariableInfo.h"
+#include "compiler/translator/util.h"
+#include "common/utilities.h"
 
-namespace {
+namespace sh
+{
+
+namespace
+{
 
-TString arrayBrackets(int index)
+TString InterfaceBlockFieldName(const TInterfaceBlock &interfaceBlock, const TField &field)
 {
-    TStringStream stream;
-    stream << "[" << index << "]";
-    return stream.str();
+    if (interfaceBlock.hasInstanceName())
+    {
+        return interfaceBlock.name() + "." + field.name();
+    }
+    else
+    {
+        return field.name();
+    }
 }
 
-// Returns the data type for an attribute, uniform, or varying.
-ShDataType getVariableDataType(const TType& type)
+BlockLayoutType GetBlockLayoutType(TLayoutBlockStorage blockStorage)
 {
-    switch (type.getBasicType()) {
-      case EbtFloat:
-          if (type.isMatrix()) {
-              switch (type.getNominalSize()) {
-                case 2: return SH_FLOAT_MAT2;
-                case 3: return SH_FLOAT_MAT3;
-                case 4: return SH_FLOAT_MAT4;
-                default: UNREACHABLE();
-              }
-          } else if (type.isVector()) {
-              switch (type.getNominalSize()) {
-                case 2: return SH_FLOAT_VEC2;
-                case 3: return SH_FLOAT_VEC3;
-                case 4: return SH_FLOAT_VEC4;
-                default: UNREACHABLE();
-              }
-          } else {
-              return SH_FLOAT;
-          }
-      case EbtInt:
-          if (type.isMatrix()) {
-              UNREACHABLE();
-          } else if (type.isVector()) {
-              switch (type.getNominalSize()) {
-                case 2: return SH_INT_VEC2;
-                case 3: return SH_INT_VEC3;
-                case 4: return SH_INT_VEC4;
-                default: UNREACHABLE();
-              }
-          } else {
-              return SH_INT;
-          }
-      case EbtBool:
-          if (type.isMatrix()) {
-              UNREACHABLE();
-          } else if (type.isVector()) {
-              switch (type.getNominalSize()) {
-                case 2: return SH_BOOL_VEC2;
-                case 3: return SH_BOOL_VEC3;
-                case 4: return SH_BOOL_VEC4;
-                default: UNREACHABLE();
-              }
-          } else {
-              return SH_BOOL;
-          }
-      case EbtSampler2D: return SH_SAMPLER_2D;
-      case EbtSamplerCube: return SH_SAMPLER_CUBE;
-      case EbtSamplerExternalOES: return SH_SAMPLER_EXTERNAL_OES;
-      case EbtSampler2DRect: return SH_SAMPLER_2D_RECT_ARB;
-      default: UNREACHABLE();
+    switch (blockStorage)
+    {
+      case EbsPacked:         return BLOCKLAYOUT_PACKED;
+      case EbsShared:         return BLOCKLAYOUT_SHARED;
+      case EbsStd140:         return BLOCKLAYOUT_STANDARD;
+      default: UNREACHABLE(); return BLOCKLAYOUT_SHARED;
     }
-    return SH_NONE;
 }
 
-void getBuiltInVariableInfo(const TType& type,
-                            const TString& name,
-                            const TString& mappedName,
-                            TVariableInfoList& infoList);
-void getUserDefinedVariableInfo(const TType& type,
-                                const TString& name,
-                                const TString& mappedName,
-                                TVariableInfoList& infoList,
-                                ShHashFunction64 hashFunction);
-
-// Returns info for an attribute, uniform, or varying.
-void getVariableInfo(const TType& type,
-                     const TString& name,
-                     const TString& mappedName,
-                     TVariableInfoList& infoList,
-                     ShHashFunction64 hashFunction)
+void ExpandUserDefinedVariable(const ShaderVariable &variable,
+                               const std::string &name,
+                               const std::string &mappedName,
+                               bool markStaticUse,
+                               std::vector<ShaderVariable> *expanded);
+
+void ExpandVariable(const ShaderVariable &variable,
+                    const std::string &name,
+                    const std::string &mappedName,
+                    bool markStaticUse,
+                    std::vector<ShaderVariable> *expanded)
 {
-    if (type.getBasicType() == EbtStruct) {
-        if (type.isArray()) {
-            for (int i = 0; i < type.getArraySize(); ++i) {
-                TString lname = name + arrayBrackets(i);
-                TString lmappedName = mappedName + arrayBrackets(i);
-                getUserDefinedVariableInfo(type, lname, lmappedName, infoList, hashFunction);
+    if (variable.isStruct())
+    {
+        if (variable.isArray())
+        {
+            for (size_t elementIndex = 0; elementIndex < variable.elementCount(); elementIndex++)
+            {
+                std::string lname = name + ::ArrayString(elementIndex);
+                std::string lmappedName = mappedName + ::ArrayString(elementIndex);
+                ExpandUserDefinedVariable(variable, lname, lmappedName, markStaticUse, expanded);
             }
-        } else {
-            getUserDefinedVariableInfo(type, name, mappedName, infoList, hashFunction);
         }
-    } else {
-        getBuiltInVariableInfo(type, name, mappedName, infoList);
+        else
+        {
+            ExpandUserDefinedVariable(variable, name, mappedName, markStaticUse, expanded);
+        }
     }
-}
+    else
+    {
+        ShaderVariable expandedVar = variable;
 
-void getBuiltInVariableInfo(const TType& type,
-                            const TString& name,
-                            const TString& mappedName,
-                            TVariableInfoList& infoList)
-{
-    ASSERT(type.getBasicType() != EbtStruct);
-
-    TVariableInfo varInfo;
-    if (type.isArray()) {
-        varInfo.name = (name + "[0]").c_str();
-        varInfo.mappedName = (mappedName + "[0]").c_str();
-        varInfo.size = type.getArraySize();
-        varInfo.isArray = true;
-    } else {
-        varInfo.name = name.c_str();
-        varInfo.mappedName = mappedName.c_str();
-        varInfo.size = 1;
-        varInfo.isArray = false;
+        expandedVar.name = name;
+        expandedVar.mappedName = mappedName;
+
+        // Mark all expanded fields as used if the parent is used
+        if (markStaticUse)
+        {
+            expandedVar.staticUse = true;
+        }
+
+        if (expandedVar.isArray())
+        {
+            expandedVar.name += "[0]";
+            expandedVar.mappedName += "[0]";
+        }
+
+        expanded->push_back(expandedVar);
     }
-    varInfo.precision = type.getPrecision();
-    varInfo.type = getVariableDataType(type);
-    infoList.push_back(varInfo);
 }
 
-void getUserDefinedVariableInfo(const TType& type,
-                                const TString& name,
-                                const TString& mappedName,
-                                TVariableInfoList& infoList,
-                                ShHashFunction64 hashFunction)
+void ExpandUserDefinedVariable(const ShaderVariable &variable,
+                               const std::string &name,
+                               const std::string &mappedName,
+                               bool markStaticUse,
+                               std::vector<ShaderVariable> *expanded)
 {
-    ASSERT(type.getBasicType() == EbtStruct);
-
-    const TFieldList& fields = type.getStruct()->fields();
-    for (size_t i = 0; i < fields.size(); ++i) {
-        const TType& fieldType = *(fields[i]->type());
-        const TString& fieldName = fields[i]->name();
-        getVariableInfo(fieldType,
-                        name + "." + fieldName,
-                        mappedName + "." + TIntermTraverser::hash(fieldName, hashFunction),
-                        infoList,
-                        hashFunction);
+    ASSERT(variable.isStruct());
+
+    const std::vector<ShaderVariable> &fields = variable.fields;
+
+    for (size_t fieldIndex = 0; fieldIndex < fields.size(); fieldIndex++)
+    {
+        const ShaderVariable &field = fields[fieldIndex];
+        ExpandVariable(field,
+                       name + "." + field.name,
+                       mappedName + "." + field.mappedName,
+                       markStaticUse,
+                       expanded);
     }
 }
 
-TVariableInfo* findVariable(const TType& type,
-                            const TString& name,
-                            TVariableInfoList& infoList)
+template <class VarT>
+VarT *FindVariable(const TString &name,
+                  std::vector<VarT> *infoList)
 {
     // TODO(zmo): optimize this function.
-    TString myName = name;
-    if (type.isArray())
-        myName += "[0]";
-    for (size_t ii = 0; ii < infoList.size(); ++ii)
+    for (size_t ii = 0; ii < infoList->size(); ++ii)
     {
-        if (infoList[ii].name.c_str() == myName)
-            return &(infoList[ii]);
+        if ((*infoList)[ii].name.c_str() == name)
+            return &((*infoList)[ii]);
     }
-    return NULL;
-}
-
-}  // namespace anonymous
 
-TVariableInfo::TVariableInfo()
-    : type(SH_NONE),
-      size(0),
-      isArray(false),
-      precision(EbpUndefined),
-      staticUse(false)
-{
+    return NULL;
 }
 
-TVariableInfo::TVariableInfo(ShDataType type, int size)
-    : type(type),
-      size(size),
-      isArray(false),
-      precision(EbpUndefined),
-      staticUse(false)
-{
 }
 
-CollectVariables::CollectVariables(TVariableInfoList& attribs,
-                                   TVariableInfoList& uniforms,
-                                   TVariableInfoList& varyings,
+CollectVariables::CollectVariables(std::vector<sh::Attribute> *attribs,
+                                   std::vector<sh::Attribute> *outputVariables,
+                                   std::vector<sh::Uniform> *uniforms,
+                                   std::vector<sh::Varying> *varyings,
+                                   std::vector<sh::InterfaceBlock> *interfaceBlocks,
                                    ShHashFunction64 hashFunction)
     : mAttribs(attribs),
+      mOutputVariables(outputVariables),
       mUniforms(uniforms),
       mVaryings(varyings),
+      mInterfaceBlocks(interfaceBlocks),
       mPointCoordAdded(false),
       mFrontFacingAdded(false),
       mFragCoordAdded(false),
@@ -203,110 +149,290 @@ CollectVariables::CollectVariables(TVariableInfoList& attribs,
 // Also, gl_FragCoord, gl_PointCoord, and gl_FrontFacing count
 // toward varying counting if they are statically used in a fragment
 // shader.
-void CollectVariables::visitSymbol(TIntermSymbol* symbol)
+void CollectVariables::visitSymbol(TIntermSymbol *symbol)
 {
     ASSERT(symbol != NULL);
-    TVariableInfo* var = NULL;
-    switch (symbol->getQualifier())
+    ShaderVariable *var = NULL;
+    const TString &symbolName = symbol->getSymbol();
+
+    if (IsVarying(symbol->getQualifier()))
     {
-    case EvqVaryingOut:
-    case EvqInvariantVaryingOut:
-    case EvqVaryingIn:
-    case EvqInvariantVaryingIn:
-        var = findVariable(symbol->getType(), symbol->getSymbol(), mVaryings);
-        break;
-    case EvqUniform:
-        var = findVariable(symbol->getType(), symbol->getSymbol(), mUniforms);
-        break;
-    case EvqFragCoord:
-        if (!mFragCoordAdded) {
-            TVariableInfo info;
-            info.name = "gl_FragCoord";
-            info.mappedName = "gl_FragCoord";
-            info.type = SH_FLOAT_VEC4;
-            info.size = 1;
-            info.precision = EbpMedium;  // Use mediump as it doesn't really matter.
-            info.staticUse = true;
-	    mVaryings.push_back(info);
-            mFragCoordAdded = true;
-        }
-        return;
-    case EvqFrontFacing:
-        if (!mFrontFacingAdded) {
-            TVariableInfo info;
-            info.name = "gl_FrontFacing";
-            info.mappedName = "gl_FrontFacing";
-            info.type = SH_BOOL;
-            info.size = 1;
-            info.precision = EbpUndefined;
-            info.staticUse = true;
-	    mVaryings.push_back(info);
-            mFrontFacingAdded = true;
-        }
-        return;
-    case EvqPointCoord:
-        if (!mPointCoordAdded) {
-            TVariableInfo info;
-            info.name = "gl_PointCoord";
-            info.mappedName = "gl_PointCoord";
-            info.type = SH_FLOAT_VEC2;
-            info.size = 1;
-            info.precision = EbpMedium;  // Use mediump as it doesn't really matter.
-            info.staticUse = true;
-	    mVaryings.push_back(info);
-            mPointCoordAdded = true;
+        var = FindVariable(symbolName, mVaryings);
+    }
+    else if (symbol->getType().getBasicType() == EbtInterfaceBlock)
+    {
+        UNREACHABLE();
+    }
+    else
+    {
+        switch (symbol->getQualifier())
+        {
+          case EvqAttribute:
+          case EvqVertexIn:
+            var = FindVariable(symbolName, mAttribs);
+            break;
+          case EvqFragmentOut:
+            var = FindVariable(symbolName, mOutputVariables);
+            break;
+          case EvqUniform:
+            {
+                const TInterfaceBlock *interfaceBlock = symbol->getType().getInterfaceBlock();
+                if (interfaceBlock)
+                {
+                    InterfaceBlock *namedBlock = FindVariable(interfaceBlock->name(), mInterfaceBlocks);
+                    ASSERT(namedBlock);
+                    var = FindVariable(symbolName, &namedBlock->fields);
+
+                    // Set static use on the parent interface block here
+                    namedBlock->staticUse = true;
+
+                }
+                else
+                {
+                    var = FindVariable(symbolName, mUniforms);
+                }
+
+                // It's an internal error to reference an undefined user uniform
+                ASSERT(symbolName.compare(0, 3, "gl_") == 0 || var);
+            }
+            break;
+          case EvqFragCoord:
+            if (!mFragCoordAdded)
+            {
+                Varying info;
+                info.name = "gl_FragCoord";
+                info.mappedName = "gl_FragCoord";
+                info.type = GL_FLOAT_VEC4;
+                info.arraySize = 0;
+                info.precision = GL_MEDIUM_FLOAT;  // Use mediump as it doesn't really matter.
+                info.staticUse = true;
+                mVaryings->push_back(info);
+                mFragCoordAdded = true;
+            }
+            return;
+          case EvqFrontFacing:
+            if (!mFrontFacingAdded)
+            {
+                Varying info;
+                info.name = "gl_FrontFacing";
+                info.mappedName = "gl_FrontFacing";
+                info.type = GL_BOOL;
+                info.arraySize = 0;
+                info.precision = GL_NONE;
+                info.staticUse = true;
+                mVaryings->push_back(info);
+                mFrontFacingAdded = true;
+            }
+            return;
+          case EvqPointCoord:
+            if (!mPointCoordAdded)
+            {
+                Varying info;
+                info.name = "gl_PointCoord";
+                info.mappedName = "gl_PointCoord";
+                info.type = GL_FLOAT_VEC2;
+                info.arraySize = 0;
+                info.precision = GL_MEDIUM_FLOAT;  // Use mediump as it doesn't really matter.
+                info.staticUse = true;
+                mVaryings->push_back(info);
+                mPointCoordAdded = true;
+            }
+            return;
+          default:
+            break;
         }
-        return;
-    default:
-        break;
     }
     if (var)
+    {
         var->staticUse = true;
+    }
 }
 
-bool CollectVariables::visitAggregate(Visit, TIntermAggregate* node)
+class NameHashingTraverser : public GetVariableTraverser
+{
+  public:
+    NameHashingTraverser(ShHashFunction64 hashFunction)
+        : mHashFunction(hashFunction)
+    {}
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(NameHashingTraverser);
+
+    virtual void visitVariable(ShaderVariable *variable)
+    {
+        TString stringName = TString(variable->name.c_str());
+        variable->mappedName = TIntermTraverser::hash(stringName, mHashFunction).c_str();
+    }
+
+    ShHashFunction64 mHashFunction;
+};
+
+// Attributes, which cannot have struct fields, are a special case
+template <>
+void CollectVariables::visitVariable(const TIntermSymbol *variable,
+                                     std::vector<Attribute> *infoList) const
+{
+    ASSERT(variable);
+    const TType &type = variable->getType();
+    ASSERT(!type.getStruct());
+
+    Attribute attribute;
+
+    attribute.type = GLVariableType(type);
+    attribute.precision = GLVariablePrecision(type);
+    attribute.name = variable->getSymbol().c_str();
+    attribute.arraySize = static_cast<unsigned int>(type.getArraySize());
+    attribute.mappedName = TIntermTraverser::hash(variable->getSymbol(), mHashFunction).c_str();
+    attribute.location = variable->getType().getLayoutQualifier().location;
+
+    infoList->push_back(attribute);
+}
+
+template <>
+void CollectVariables::visitVariable(const TIntermSymbol *variable,
+                                     std::vector<InterfaceBlock> *infoList) const
+{
+    InterfaceBlock interfaceBlock;
+    const TInterfaceBlock *blockType = variable->getType().getInterfaceBlock();
+    ASSERT(blockType);
+
+    interfaceBlock.name = blockType->name().c_str();
+    interfaceBlock.mappedName = TIntermTraverser::hash(variable->getSymbol(), mHashFunction).c_str();
+    interfaceBlock.instanceName = (blockType->hasInstanceName() ? blockType->instanceName().c_str() : "");
+    interfaceBlock.arraySize = variable->getArraySize();
+    interfaceBlock.isRowMajorLayout = (blockType->matrixPacking() == EmpRowMajor);
+    interfaceBlock.layout = GetBlockLayoutType(blockType->blockStorage());
+
+    // Gather field information
+    const TFieldList &fieldList = blockType->fields();
+
+    for (size_t fieldIndex = 0; fieldIndex < fieldList.size(); ++fieldIndex)
+    {
+        const TField &field = *fieldList[fieldIndex];
+        const TString &fullFieldName = InterfaceBlockFieldName(*blockType, field);
+        const TType &fieldType = *field.type();
+
+        GetVariableTraverser traverser;
+        traverser.traverse(fieldType, fullFieldName, &interfaceBlock.fields);
+
+        interfaceBlock.fields.back().isRowMajorLayout = (fieldType.getLayoutQualifier().matrixPacking == EmpRowMajor);
+    }
+
+    infoList->push_back(interfaceBlock);
+}
+
+template <typename VarT>
+void CollectVariables::visitVariable(const TIntermSymbol *variable,
+                                     std::vector<VarT> *infoList) const
+{
+    NameHashingTraverser traverser(mHashFunction);
+    traverser.traverse(variable->getType(), variable->getSymbol(), infoList);
+}
+
+template <typename VarT>
+void CollectVariables::visitInfoList(const TIntermSequence &sequence,
+                                     std::vector<VarT> *infoList) const
+{
+    for (size_t seqIndex = 0; seqIndex < sequence.size(); seqIndex++)
+    {
+        const TIntermSymbol *variable = sequence[seqIndex]->getAsSymbolNode();
+        // The only case in which the sequence will not contain a
+        // TIntermSymbol node is initialization. It will contain a
+        // TInterBinary node in that case. Since attributes, uniforms,
+        // and varyings cannot be initialized in a shader, we must have
+        // only TIntermSymbol nodes in the sequence.
+        ASSERT(variable != NULL);
+        visitVariable(variable, infoList);
+    }
+}
+
+bool CollectVariables::visitAggregate(Visit, TIntermAggregate *node)
 {
     bool visitChildren = true;
 
     switch (node->getOp())
     {
-    case EOpDeclaration: {
-        const TIntermSequence& sequence = node->getSequence();
-        TQualifier qualifier = sequence.front()->getAsTyped()->getQualifier();
-        if (qualifier == EvqAttribute || qualifier == EvqUniform ||
-            qualifier == EvqVaryingIn || qualifier == EvqVaryingOut ||
-            qualifier == EvqInvariantVaryingIn || qualifier == EvqInvariantVaryingOut)
+      case EOpDeclaration:
         {
-            TVariableInfoList& infoList = qualifier == EvqAttribute ? mAttribs :
-                (qualifier == EvqUniform ? mUniforms : mVaryings);
-            for (TIntermSequence::const_iterator i = sequence.begin();
-                 i != sequence.end(); ++i)
+            const TIntermSequence &sequence = *(node->getSequence());
+            ASSERT(!sequence.empty());
+
+            const TIntermTyped &typedNode = *(sequence.front()->getAsTyped());
+            TQualifier qualifier = typedNode.getQualifier();
+
+            if (typedNode.getBasicType() == EbtInterfaceBlock)
             {
-                const TIntermSymbol* variable = (*i)->getAsSymbolNode();
-                // The only case in which the sequence will not contain a
-                // TIntermSymbol node is initialization. It will contain a
-                // TInterBinary node in that case. Since attributes, uniforms,
-                // and varyings cannot be initialized in a shader, we must have
-                // only TIntermSymbol nodes in the sequence.
-                ASSERT(variable != NULL);
-                TString processedSymbol;
-                if (mHashFunction == NULL)
-                    processedSymbol = variable->getSymbol();
-                else
-                    processedSymbol = TIntermTraverser::hash(variable->getOriginalSymbol(), mHashFunction);
-                getVariableInfo(variable->getType(),
-                                variable->getOriginalSymbol(),
-                                processedSymbol,
-                                infoList,
-                                mHashFunction);
+                visitInfoList(sequence, mInterfaceBlocks);
+                visitChildren = false;
+            }
+            else if (qualifier == EvqAttribute || qualifier == EvqVertexIn ||
+                     qualifier == EvqFragmentOut || qualifier == EvqUniform ||
+                     IsVarying(qualifier))
+            {
+                switch (qualifier)
+                {
+                  case EvqAttribute:
+                  case EvqVertexIn:
+                    visitInfoList(sequence, mAttribs);
+                    break;
+                  case EvqFragmentOut:
+                    visitInfoList(sequence, mOutputVariables);
+                    break;
+                  case EvqUniform:
+                    visitInfoList(sequence, mUniforms);
+                    break;
+                  default:
+                    visitInfoList(sequence, mVaryings);
+                    break;
+                }
+
                 visitChildren = false;
             }
+            break;
         }
-        break;
-    }
-    default: break;
+      default: break;
     }
 
     return visitChildren;
 }
 
+bool CollectVariables::visitBinary(Visit, TIntermBinary *binaryNode)
+{
+    if (binaryNode->getOp() == EOpIndexDirectInterfaceBlock)
+    {
+        // NOTE: we do not determine static use for individual blocks of an array
+        TIntermTyped *blockNode = binaryNode->getLeft()->getAsTyped();
+        ASSERT(blockNode);
+
+        TIntermConstantUnion *constantUnion = binaryNode->getRight()->getAsConstantUnion();
+        ASSERT(constantUnion);
+
+        const TInterfaceBlock *interfaceBlock = blockNode->getType().getInterfaceBlock();
+        InterfaceBlock *namedBlock = FindVariable(interfaceBlock->name(), mInterfaceBlocks);
+        ASSERT(namedBlock);
+        namedBlock->staticUse = true;
+
+        unsigned int fieldIndex = constantUnion->getUConst(0);
+        ASSERT(fieldIndex < namedBlock->fields.size());
+        namedBlock->fields[fieldIndex].staticUse = true;
+        return false;
+    }
+
+    return true;
+}
+
+template <typename VarT>
+void ExpandVariables(const std::vector<VarT> &compact,
+                     std::vector<ShaderVariable> *expanded)
+{
+    for (size_t variableIndex = 0; variableIndex < compact.size(); variableIndex++)
+    {
+        const ShaderVariable &variable = compact[variableIndex];
+        ExpandVariable(variable, variable.name, variable.mappedName, variable.staticUse, expanded);
+    }
+}
+
+template void ExpandVariables(const std::vector<Uniform> &, std::vector<ShaderVariable> *);
+template void ExpandVariables(const std::vector<Varying> &, std::vector<ShaderVariable> *);
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/VariableInfo.h b/src/3rdparty/angle/src/compiler/translator/VariableInfo.h
index 37216cd142..5ac4c46baa 100644
--- a/src/3rdparty/angle/src/compiler/translator/VariableInfo.h
+++ b/src/3rdparty/angle/src/compiler/translator/VariableInfo.h
@@ -7,40 +7,42 @@
 #ifndef COMPILER_VARIABLE_INFO_H_
 #define COMPILER_VARIABLE_INFO_H_
 
-#include "GLSLANG/ShaderLang.h"
-#include "compiler/translator/intermediate.h"
-
-// Provides information about a variable.
-// It is currently being used to store info about active attribs and uniforms.
-struct TVariableInfo {
-    TVariableInfo(ShDataType type, int size);
-    TVariableInfo();
-
-    TPersistString name;
-    TPersistString mappedName;
-    ShDataType type;
-    int size;
-    bool isArray;
-    TPrecision precision;
-    bool staticUse;
-};
-typedef std::vector<TVariableInfo> TVariableInfoList;
+#include <GLSLANG/ShaderLang.h>
+
+#include "compiler/translator/IntermNode.h"
+
+namespace sh
+{
 
 // Traverses intermediate tree to collect all attributes, uniforms, varyings.
-class CollectVariables : public TIntermTraverser {
-public:
-    CollectVariables(TVariableInfoList& attribs,
-                     TVariableInfoList& uniforms,
-                     TVariableInfoList& varyings,
+class CollectVariables : public TIntermTraverser
+{
+  public:
+    CollectVariables(std::vector<Attribute> *attribs,
+                     std::vector<Attribute> *outputVariables,
+                     std::vector<Uniform> *uniforms,
+                     std::vector<Varying> *varyings,
+                     std::vector<InterfaceBlock> *interfaceBlocks,
                      ShHashFunction64 hashFunction);
 
-    virtual void visitSymbol(TIntermSymbol*);
-    virtual bool visitAggregate(Visit, TIntermAggregate*);
+    virtual void visitSymbol(TIntermSymbol *symbol);
+    virtual bool visitAggregate(Visit, TIntermAggregate *node);
+    virtual bool visitBinary(Visit visit, TIntermBinary *binaryNode);
+
+  private:
+    template <typename VarT>
+    void visitVariable(const TIntermSymbol *variable, std::vector<VarT> *infoList) const;
 
-private:
-    TVariableInfoList& mAttribs;
-    TVariableInfoList& mUniforms;
-    TVariableInfoList& mVaryings;
+    template <typename VarT>
+    void visitInfoList(const TIntermSequence &sequence, std::vector<VarT> *infoList) const;
+
+    std::vector<Attribute> *mAttribs;
+    std::vector<Attribute> *mOutputVariables;
+    std::vector<Uniform> *mUniforms;
+    std::vector<Varying> *mVaryings;
+    std::vector<InterfaceBlock> *mInterfaceBlocks;
+
+    std::map<std::string, InterfaceBlockField *> mInterfaceBlockFields;
 
     bool mPointCoordAdded;
     bool mFrontFacingAdded;
@@ -49,4 +51,11 @@ private:
     ShHashFunction64 mHashFunction;
 };
 
+// Expand struct variables to flattened lists of split variables
+template <typename VarT>
+void ExpandVariables(const std::vector<VarT> &compact,
+                     std::vector<ShaderVariable> *expanded);
+
+}
+
 #endif  // COMPILER_VARIABLE_INFO_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/VariablePacker.cpp b/src/3rdparty/angle/src/compiler/translator/VariablePacker.cpp
index 5634d86337..e69052162a 100644
--- a/src/3rdparty/angle/src/compiler/translator/VariablePacker.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/VariablePacker.cpp
@@ -3,122 +3,81 @@
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
-#include "compiler/translator/VariablePacker.h"
 
 #include <algorithm>
-#include "compiler/translator/ShHandle.h"
 
-namespace {
-int GetSortOrder(ShDataType type)
-{
-    switch (type) {
-        case SH_FLOAT_MAT4:
-            return 0;
-        case SH_FLOAT_MAT2:
-            return 1;
-        case SH_FLOAT_VEC4:
-        case SH_INT_VEC4:
-        case SH_BOOL_VEC4:
-            return 2;
-        case SH_FLOAT_MAT3:
-            return 3;
-        case SH_FLOAT_VEC3:
-        case SH_INT_VEC3:
-        case SH_BOOL_VEC3:
-            return 4;
-        case SH_FLOAT_VEC2:
-        case SH_INT_VEC2:
-        case SH_BOOL_VEC2:
-            return 5;
-        case SH_FLOAT:
-        case SH_INT:
-        case SH_BOOL:
-        case SH_SAMPLER_2D:
-        case SH_SAMPLER_CUBE:
-        case SH_SAMPLER_EXTERNAL_OES:
-        case SH_SAMPLER_2D_RECT_ARB:
-            return 6;
-        default:
-            ASSERT(false);
-            return 7;
-    }
-}
-}    // namespace
+#include "angle_gl.h"
 
-int VariablePacker::GetNumComponentsPerRow(ShDataType type)
+#include "compiler/translator/VariablePacker.h"
+#include "common/utilities.h"
+
+int VariablePacker::GetNumComponentsPerRow(sh::GLenum type)
 {
-    switch (type) {
-        case SH_FLOAT_MAT4:
-        case SH_FLOAT_MAT2:
-        case SH_FLOAT_VEC4:
-        case SH_INT_VEC4:
-        case SH_BOOL_VEC4:
-            return 4;
-        case SH_FLOAT_MAT3:
-        case SH_FLOAT_VEC3:
-        case SH_INT_VEC3:
-        case SH_BOOL_VEC3:
-            return 3;
-        case SH_FLOAT_VEC2:
-        case SH_INT_VEC2:
-        case SH_BOOL_VEC2:
-            return 2;
-        case SH_FLOAT:
-        case SH_INT:
-        case SH_BOOL:
-        case SH_SAMPLER_2D:
-        case SH_SAMPLER_CUBE:
-        case SH_SAMPLER_EXTERNAL_OES:
-        case SH_SAMPLER_2D_RECT_ARB:
-            return 1;
-        default:
-            ASSERT(false);
-            return 5;
+    switch (type)
+    {
+      case GL_FLOAT_MAT4:
+      case GL_FLOAT_MAT2:
+      case GL_FLOAT_MAT2x4:
+      case GL_FLOAT_MAT3x4:
+      case GL_FLOAT_MAT4x2:
+      case GL_FLOAT_MAT4x3:
+      case GL_FLOAT_VEC4:
+      case GL_INT_VEC4:
+      case GL_BOOL_VEC4:
+      case GL_UNSIGNED_INT_VEC4:
+        return 4;
+      case GL_FLOAT_MAT3:
+      case GL_FLOAT_MAT2x3:
+      case GL_FLOAT_MAT3x2:
+      case GL_FLOAT_VEC3:
+      case GL_INT_VEC3:
+      case GL_BOOL_VEC3:
+      case GL_UNSIGNED_INT_VEC3:
+        return 3;
+      case GL_FLOAT_VEC2:
+      case GL_INT_VEC2:
+      case GL_BOOL_VEC2:
+      case GL_UNSIGNED_INT_VEC2:
+        return 2;
+      default:
+        ASSERT(gl::VariableComponentCount(type) == 1);
+        return 1;
     }
 }
 
-int VariablePacker::GetNumRows(ShDataType type)
+int VariablePacker::GetNumRows(sh::GLenum type)
 {
-    switch (type) {
-        case SH_FLOAT_MAT4:
-            return 4;
-        case SH_FLOAT_MAT3:
-            return 3;
-        case SH_FLOAT_MAT2:
-            return 2;
-        case SH_FLOAT_VEC4:
-        case SH_INT_VEC4:
-        case SH_BOOL_VEC4:
-        case SH_FLOAT_VEC3:
-        case SH_INT_VEC3:
-        case SH_BOOL_VEC3:
-        case SH_FLOAT_VEC2:
-        case SH_INT_VEC2:
-        case SH_BOOL_VEC2:
-        case SH_FLOAT:
-        case SH_INT:
-        case SH_BOOL:
-        case SH_SAMPLER_2D:
-        case SH_SAMPLER_CUBE:
-        case SH_SAMPLER_EXTERNAL_OES:
-        case SH_SAMPLER_2D_RECT_ARB:
-            return 1;
-        default:
-            ASSERT(false);
-            return 100000;
+    switch (type)
+    {
+      case GL_FLOAT_MAT4:
+      case GL_FLOAT_MAT2x4:
+      case GL_FLOAT_MAT3x4:
+      case GL_FLOAT_MAT4x3:
+      case GL_FLOAT_MAT4x2:
+        return 4;
+      case GL_FLOAT_MAT3:
+      case GL_FLOAT_MAT2x3:
+      case GL_FLOAT_MAT3x2:
+        return 3;
+      case GL_FLOAT_MAT2:
+        return 2;
+      default:
+        ASSERT(gl::VariableRowCount(type) == 1);
+        return 1;
     }
 }
 
-struct TVariableInfoComparer {
-    bool operator()(const TVariableInfo& lhs, const TVariableInfo& rhs) const
+struct TVariableInfoComparer
+{
+    bool operator()(const sh::ShaderVariable &lhs, const sh::ShaderVariable &rhs) const
     {
-        int lhsSortOrder = GetSortOrder(lhs.type);
-        int rhsSortOrder = GetSortOrder(rhs.type);
+        int lhsSortOrder = gl::VariableSortOrder(lhs.type);
+        int rhsSortOrder = gl::VariableSortOrder(rhs.type);
         if (lhsSortOrder != rhsSortOrder) {
             return lhsSortOrder < rhsSortOrder;
         }
         // Sort by largest first.
-        return lhs.size > rhs.size;
+        return lhs.arraySize > rhs.arraySize;
     }
 };
 
@@ -189,13 +148,23 @@ bool VariablePacker::searchColumn(int column, int numRows, int* destRow, int* de
     return true;
 }
 
-bool VariablePacker::CheckVariablesWithinPackingLimits(int maxVectors, const TVariableInfoList& in_variables)
+template <typename VarT>
+bool VariablePacker::CheckVariablesWithinPackingLimits(unsigned int maxVectors,
+                                                       const std::vector<VarT> &in_variables)
 {
     ASSERT(maxVectors > 0);
     maxRows_ = maxVectors;
     topNonFullRow_ = 0;
     bottomNonFullRow_ = maxRows_ - 1;
-    TVariableInfoList variables(in_variables);
+    std::vector<VarT> variables(in_variables);
+
+    // Check whether each variable fits in the available vectors.
+    for (size_t i = 0; i < variables.size(); i++) {
+        const sh::ShaderVariable &variable = variables[i];
+        if (variable.elementCount() > maxVectors / GetNumRows(variable.type)) {
+            return false;
+        }
+    }
 
     // As per GLSL 1.017 Appendix A, Section 7 variables are packed in specific
     // order by type, then by size of array, largest first.
@@ -206,11 +175,11 @@ bool VariablePacker::CheckVariablesWithinPackingLimits(int maxVectors, const TVa
     // Packs the 4 column variables.
     size_t ii = 0;
     for (; ii < variables.size(); ++ii) {
-        const TVariableInfo& variable = variables[ii];
+        const sh::ShaderVariable &variable = variables[ii];
         if (GetNumComponentsPerRow(variable.type) != 4) {
             break;
         }
-        topNonFullRow_ += GetNumRows(variable.type) * variable.size;
+        topNonFullRow_ += GetNumRows(variable.type) * variable.elementCount();
     }
 
     if (topNonFullRow_ > maxRows_) {
@@ -220,11 +189,11 @@ bool VariablePacker::CheckVariablesWithinPackingLimits(int maxVectors, const TVa
     // Packs the 3 column variables.
     int num3ColumnRows = 0;
     for (; ii < variables.size(); ++ii) {
-        const TVariableInfo& variable = variables[ii];
+        const sh::ShaderVariable &variable = variables[ii];
         if (GetNumComponentsPerRow(variable.type) != 3) {
             break;
         }
-        num3ColumnRows += GetNumRows(variable.type) * variable.size;
+        num3ColumnRows += GetNumRows(variable.type) * variable.elementCount();
     }
 
     if (topNonFullRow_ + num3ColumnRows > maxRows_) {
@@ -239,11 +208,11 @@ bool VariablePacker::CheckVariablesWithinPackingLimits(int maxVectors, const TVa
     int rowsAvailableInColumns01 = twoColumnRowsAvailable;
     int rowsAvailableInColumns23 = twoColumnRowsAvailable;
     for (; ii < variables.size(); ++ii) {
-        const TVariableInfo& variable = variables[ii];
+        const sh::ShaderVariable &variable = variables[ii];
         if (GetNumComponentsPerRow(variable.type) != 2) {
             break;
         }
-        int numRows = GetNumRows(variable.type) * variable.size;
+        int numRows = GetNumRows(variable.type) * variable.elementCount();
         if (numRows <= rowsAvailableInColumns01) {
             rowsAvailableInColumns01 -= numRows;
         } else if (numRows <= rowsAvailableInColumns23) {
@@ -263,9 +232,9 @@ bool VariablePacker::CheckVariablesWithinPackingLimits(int maxVectors, const TVa
 
     // Packs the 1 column variables.
     for (; ii < variables.size(); ++ii) {
-        const TVariableInfo& variable = variables[ii];
+        const sh::ShaderVariable &variable = variables[ii];
         ASSERT(1 == GetNumComponentsPerRow(variable.type));
-        int numRows = GetNumRows(variable.type) * variable.size;
+        int numRows = GetNumRows(variable.type) * variable.elementCount();
         int smallestColumn = -1;
         int smallestSize = maxRows_ + 1;
         int topRow = -1;
@@ -293,5 +262,8 @@ bool VariablePacker::CheckVariablesWithinPackingLimits(int maxVectors, const TVa
     return true;
 }
 
-
-
+// Instantiate all possible variable packings
+template bool VariablePacker::CheckVariablesWithinPackingLimits(unsigned int, const std::vector<sh::ShaderVariable> &);
+template bool VariablePacker::CheckVariablesWithinPackingLimits(unsigned int, const std::vector<sh::Attribute> &);
+template bool VariablePacker::CheckVariablesWithinPackingLimits(unsigned int, const std::vector<sh::Uniform> &);
+template bool VariablePacker::CheckVariablesWithinPackingLimits(unsigned int, const std::vector<sh::Varying> &);
diff --git a/src/3rdparty/angle/src/compiler/translator/VariablePacker.h b/src/3rdparty/angle/src/compiler/translator/VariablePacker.h
index fd6090827c..1de5332d8a 100644
--- a/src/3rdparty/angle/src/compiler/translator/VariablePacker.h
+++ b/src/3rdparty/angle/src/compiler/translator/VariablePacker.h
@@ -8,23 +8,23 @@
 #define _VARIABLEPACKER_INCLUDED_
 
 #include <vector>
-#include "compiler/translator/ShHandle.h"
+#include "compiler/translator/VariableInfo.h"
 
 class VariablePacker {
  public:
     // Returns true if the passed in variables pack in maxVectors following
     // the packing rules from the GLSL 1.017 spec, Appendix A, section 7.
-    bool CheckVariablesWithinPackingLimits(
-        int maxVectors,
-        const TVariableInfoList& in_variables);
+    template <typename VarT>
+    bool CheckVariablesWithinPackingLimits(unsigned int maxVectors,
+                                           const std::vector<VarT> &in_variables);
 
     // Gets how many components in a row a data type takes.
-    static int GetNumComponentsPerRow(ShDataType type);
+    static int GetNumComponentsPerRow(sh::GLenum type);
 
     // Gets how many rows a data type takes.
-    static int GetNumRows(ShDataType type);
+    static int GetNumRows(sh::GLenum type);
 
- private:
+  private:
     static const int kNumColumns = 4;
     static const unsigned kColumnMask = (1 << kNumColumns) - 1;
 
diff --git a/src/3rdparty/angle/src/compiler/translator/VersionGLSL.cpp b/src/3rdparty/angle/src/compiler/translator/VersionGLSL.cpp
index dd11f99eb8..8edbd009b0 100644
--- a/src/3rdparty/angle/src/compiler/translator/VersionGLSL.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/VersionGLSL.cpp
@@ -35,104 +35,84 @@ static const int GLSL_VERSION_120 = 120;
 //    - invariant gl_Position;
 //    - varying vec3 color; invariant color;
 //
-TVersionGLSL::TVersionGLSL(ShShaderType type)
-    : mShaderType(type),
-      mVersion(GLSL_VERSION_110)
+TVersionGLSL::TVersionGLSL(sh::GLenum type)
+    : mVersion(GLSL_VERSION_110)
 {
 }
 
-void TVersionGLSL::visitSymbol(TIntermSymbol* node)
+void TVersionGLSL::visitSymbol(TIntermSymbol *node)
 {
     if (node->getSymbol() == "gl_PointCoord")
         updateVersion(GLSL_VERSION_120);
 }
 
-void TVersionGLSL::visitConstantUnion(TIntermConstantUnion*)
-{
-}
-
-bool TVersionGLSL::visitBinary(Visit, TIntermBinary*)
-{
-    return true;
-}
-
-bool TVersionGLSL::visitUnary(Visit, TIntermUnary*)
-{
-    return true;
-}
-
-bool TVersionGLSL::visitSelection(Visit, TIntermSelection*)
-{
-    return true;
-}
-
-bool TVersionGLSL::visitAggregate(Visit, TIntermAggregate* node)
+bool TVersionGLSL::visitAggregate(Visit, TIntermAggregate *node)
 {
     bool visitChildren = true;
 
-    switch (node->getOp()) {
+    switch (node->getOp())
+    {
       case EOpSequence:
         // We need to visit sequence children to get to global or inner scope.
         visitChildren = true;
         break;
-      case EOpDeclaration: {
-        const TIntermSequence& sequence = node->getSequence();
-        TQualifier qualifier = sequence.front()->getAsTyped()->getQualifier();
-        if ((qualifier == EvqInvariantVaryingIn) ||
-            (qualifier == EvqInvariantVaryingOut)) {
-            updateVersion(GLSL_VERSION_120);
+      case EOpDeclaration:
+        {
+            const TIntermSequence &sequence = *(node->getSequence());
+            TQualifier qualifier = sequence.front()->getAsTyped()->getQualifier();
+            if ((qualifier == EvqInvariantVaryingIn) ||
+                (qualifier == EvqInvariantVaryingOut))
+            {
+                updateVersion(GLSL_VERSION_120);
+            }
+            break;
         }
+      case EOpInvariantDeclaration:
+        updateVersion(GLSL_VERSION_120);
         break;
-      }
-      case EOpParameters: {
-        const TIntermSequence& params = node->getSequence();
-        for (TIntermSequence::const_iterator iter = params.begin();
-             iter != params.end(); ++iter)
+      case EOpParameters:
         {
-            const TIntermTyped* param = (*iter)->getAsTyped();
-            if (param->isArray())
+            const TIntermSequence &params = *(node->getSequence());
+            for (TIntermSequence::const_iterator iter = params.begin();
+                 iter != params.end(); ++iter)
             {
-                TQualifier qualifier = param->getQualifier();
-                if ((qualifier == EvqOut) || (qualifier ==  EvqInOut))
+                const TIntermTyped *param = (*iter)->getAsTyped();
+                if (param->isArray())
                 {
-                    updateVersion(GLSL_VERSION_120);
-                    break;
+                    TQualifier qualifier = param->getQualifier();
+                    if ((qualifier == EvqOut) || (qualifier ==  EvqInOut))
+                    {
+                        updateVersion(GLSL_VERSION_120);
+                        break;
+                    }
                 }
             }
+            // Fully processed. No need to visit children.
+            visitChildren = false;
+            break;
         }
-        // Fully processed. No need to visit children.
-        visitChildren = false;
-        break;
-      }
       case EOpConstructMat2:
       case EOpConstructMat3:
-      case EOpConstructMat4: {
-        const TIntermSequence& sequence = node->getSequence();
-        if (sequence.size() == 1) {
-          TIntermTyped* typed = sequence.front()->getAsTyped();
-          if (typed && typed->isMatrix()) {
-            updateVersion(GLSL_VERSION_120);
-          }
+      case EOpConstructMat4:
+        {
+            const TIntermSequence &sequence = *(node->getSequence());
+            if (sequence.size() == 1)
+            {
+                TIntermTyped *typed = sequence.front()->getAsTyped();
+                if (typed && typed->isMatrix())
+                {
+                    updateVersion(GLSL_VERSION_120);
+                }
+            }
+            break;
         }
+      default:
         break;
-      }
-
-      default: break;
     }
 
     return visitChildren;
 }
 
-bool TVersionGLSL::visitLoop(Visit, TIntermLoop*)
-{
-    return true;
-}
-
-bool TVersionGLSL::visitBranch(Visit, TIntermBranch*)
-{
-    return true;
-}
-
 void TVersionGLSL::updateVersion(int version)
 {
     mVersion = std::max(version, mVersion);
diff --git a/src/3rdparty/angle/src/compiler/translator/VersionGLSL.h b/src/3rdparty/angle/src/compiler/translator/VersionGLSL.h
index d310066171..30f5a138a0 100644
--- a/src/3rdparty/angle/src/compiler/translator/VersionGLSL.h
+++ b/src/3rdparty/angle/src/compiler/translator/VersionGLSL.h
@@ -1,14 +1,13 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
-#ifndef COMPILER_VERSIONGLSL_H_
-#define COMPILER_VERSIONGLSL_H_
+#ifndef COMPILER_TRANSLATOR_VERSIONGLSL_H_
+#define COMPILER_TRANSLATOR_VERSIONGLSL_H_
 
-#include "GLSLANG/ShaderLang.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 // Traverses the intermediate tree to return the minimum GLSL version
 // required to legally access all built-in features used in the shader.
@@ -24,9 +23,11 @@
 //   - matrix constructors taking matrix as argument.
 //   - array as "out" function parameters
 //
-class TVersionGLSL : public TIntermTraverser {
-public:
-    TVersionGLSL(ShShaderType type);
+// TODO: ES3 equivalent versions of GLSL
+class TVersionGLSL : public TIntermTraverser
+{
+  public:
+    TVersionGLSL(sh::GLenum type);
 
     // Returns 120 if the following is used the shader:
     // - "invariant",
@@ -36,21 +37,14 @@ public:
     // Else 110 is returned.
     int getVersion() { return mVersion; }
 
-    virtual void visitSymbol(TIntermSymbol*);
-    virtual void visitConstantUnion(TIntermConstantUnion*);
-    virtual bool visitBinary(Visit, TIntermBinary*);
-    virtual bool visitUnary(Visit, TIntermUnary*);
-    virtual bool visitSelection(Visit, TIntermSelection*);
-    virtual bool visitAggregate(Visit, TIntermAggregate*);
-    virtual bool visitLoop(Visit, TIntermLoop*);
-    virtual bool visitBranch(Visit, TIntermBranch*);
+    virtual void visitSymbol(TIntermSymbol *);
+    virtual bool visitAggregate(Visit, TIntermAggregate *);
 
-protected:
+  protected:
     void updateVersion(int version);
 
-private:
-    ShShaderType mShaderType;
+  private:
     int mVersion;
 };
 
-#endif  // COMPILER_VERSIONGLSL_H_
+#endif  // COMPILER_TRANSLATOR_VERSIONGLSL_H_
diff --git a/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraph.h b/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraph.h
index 5ea1cbb837..bc25fe7cbc 100644
--- a/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraph.h
+++ b/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraph.h
@@ -7,7 +7,7 @@
 #ifndef COMPILER_DEPGRAPH_DEPENDENCY_GRAPH_H
 #define COMPILER_DEPGRAPH_DEPENDENCY_GRAPH_H
 
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 #include <set>
 #include <stack>
diff --git a/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.cpp b/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.cpp
index d5f2cba5fc..1aeb822d51 100644
--- a/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.cpp
@@ -6,24 +6,32 @@
 
 #include "compiler/translator/depgraph/DependencyGraphBuilder.h"
 
-void TDependencyGraphBuilder::build(TIntermNode* node, TDependencyGraph* graph)
+void TDependencyGraphBuilder::build(TIntermNode *node, TDependencyGraph *graph)
 {
     TDependencyGraphBuilder builder(graph);
     builder.build(node);
 }
 
-bool TDependencyGraphBuilder::visitAggregate(Visit visit, TIntermAggregate* intermAggregate)
+bool TDependencyGraphBuilder::visitAggregate(
+    Visit visit, TIntermAggregate *intermAggregate)
 {
-    switch (intermAggregate->getOp()) {
-        case EOpFunction: visitFunctionDefinition(intermAggregate); break;
-        case EOpFunctionCall: visitFunctionCall(intermAggregate); break;
-        default: visitAggregateChildren(intermAggregate); break;
+    switch (intermAggregate->getOp())
+    {
+      case EOpFunction:
+        visitFunctionDefinition(intermAggregate);
+        break;
+      case EOpFunctionCall:
+        visitFunctionCall(intermAggregate);
+        break;
+      default:
+        visitAggregateChildren(intermAggregate);
+        break;
     }
-
     return false;
 }
 
-void TDependencyGraphBuilder::visitFunctionDefinition(TIntermAggregate* intermAggregate)
+void TDependencyGraphBuilder::visitFunctionDefinition(
+    TIntermAggregate *intermAggregate)
 {
     // Currently, we do not support user defined functions.
     if (intermAggregate->getName() != "main(")
@@ -34,64 +42,71 @@ void TDependencyGraphBuilder::visitFunctionDefinition(TIntermAggregate* intermAg
 
 // Takes an expression like "f(x)" and creates a dependency graph like
 // "x -> argument 0 -> function call".
-void TDependencyGraphBuilder::visitFunctionCall(TIntermAggregate* intermFunctionCall)
+void TDependencyGraphBuilder::visitFunctionCall(
+    TIntermAggregate *intermFunctionCall)
 {
-    TGraphFunctionCall* functionCall = mGraph->createFunctionCall(intermFunctionCall);
+    TGraphFunctionCall *functionCall =
+        mGraph->createFunctionCall(intermFunctionCall);
 
     // Run through the function call arguments.
     int argumentNumber = 0;
-    TIntermSequence& intermArguments = intermFunctionCall->getSequence();
-    for (TIntermSequence::const_iterator iter = intermArguments.begin();
-         iter != intermArguments.end();
+    TIntermSequence *intermArguments = intermFunctionCall->getSequence();
+    for (TIntermSequence::const_iterator iter = intermArguments->begin();
+         iter != intermArguments->end();
          ++iter, ++argumentNumber)
     {
         TNodeSetMaintainer nodeSetMaintainer(this);
 
-        TIntermNode* intermArgument = *iter;
+        TIntermNode *intermArgument = *iter;
         intermArgument->traverse(this);
 
-        if (TParentNodeSet* argumentNodes = mNodeSets.getTopSet()) {
-            TGraphArgument* argument = mGraph->createArgument(intermFunctionCall, argumentNumber);
+        if (TParentNodeSet *argumentNodes = mNodeSets.getTopSet())
+        {
+            TGraphArgument *argument = mGraph->createArgument(
+                intermFunctionCall, argumentNumber);
             connectMultipleNodesToSingleNode(argumentNodes, argument);
             argument->addDependentNode(functionCall);
         }
     }
 
-    // Push the leftmost symbol of this function call into the current set of dependent symbols to
-    // represent the result of this function call.
+    // Push the leftmost symbol of this function call into the current set of
+    // dependent symbols to represent the result of this function call.
     // Thus, an expression like "y = f(x)" will yield a dependency graph like
     // "x -> argument 0 -> function call -> y".
-    // This line essentially passes the function call node back up to an earlier visitAssignment
-    // call, which will create the connection "function call -> y".
+    // This line essentially passes the function call node back up to an earlier
+    // visitAssignment call, which will create the connection "function call -> y".
     mNodeSets.insertIntoTopSet(functionCall);
 }
 
-void TDependencyGraphBuilder::visitAggregateChildren(TIntermAggregate* intermAggregate)
+void TDependencyGraphBuilder::visitAggregateChildren(
+    TIntermAggregate *intermAggregate)
 {
-    TIntermSequence& sequence = intermAggregate->getSequence();
-    for(TIntermSequence::const_iterator iter = sequence.begin(); iter != sequence.end(); ++iter)
+    TIntermSequence *sequence = intermAggregate->getSequence();
+    for (TIntermSequence::const_iterator iter = sequence->begin();
+         iter != sequence->end(); ++iter)
     {
-        TIntermNode* intermChild = *iter;
+        TIntermNode *intermChild = *iter;
         intermChild->traverse(this);
     }
 }
 
-void TDependencyGraphBuilder::visitSymbol(TIntermSymbol* intermSymbol)
+void TDependencyGraphBuilder::visitSymbol(TIntermSymbol *intermSymbol)
 {
-    // Push this symbol into the set of dependent symbols for the current assignment or condition
-    // that we are traversing.
-    TGraphSymbol* symbol = mGraph->getOrCreateSymbol(intermSymbol);
+    // Push this symbol into the set of dependent symbols for the current
+    // assignment or condition that we are traversing.
+    TGraphSymbol *symbol = mGraph->getOrCreateSymbol(intermSymbol);
     mNodeSets.insertIntoTopSet(symbol);
 
-    // If this symbol is the current leftmost symbol under an assignment, replace the previous
-    // leftmost symbol with this symbol.
-    if (!mLeftmostSymbols.empty() && mLeftmostSymbols.top() != &mRightSubtree) {
+    // If this symbol is the current leftmost symbol under an assignment, replace
+    // the previous leftmost symbol with this symbol.
+    if (!mLeftmostSymbols.empty() && mLeftmostSymbols.top() != &mRightSubtree)
+    {
         mLeftmostSymbols.pop();
         mLeftmostSymbols.push(symbol);
     }
 }
 
-bool TDependencyGraphBuilder::visitBinary(Visit visit, TIntermBinary* intermBinary)
+bool TDependencyGraphBuilder::visitBinary(Visit visit, TIntermBinary *intermBinary)
 {
     TOperator op = intermBinary->getOp();
     if (op == EOpInitialize || intermBinary->isAssignment())
@@ -104,13 +119,13 @@ bool TDependencyGraphBuilder::visitBinary(Visit visit, TIntermBinary* intermBina
     return false;
 }
 
-void TDependencyGraphBuilder::visitAssignment(TIntermBinary* intermAssignment)
+void TDependencyGraphBuilder::visitAssignment(TIntermBinary *intermAssignment)
 {
-    TIntermTyped* intermLeft = intermAssignment->getLeft();
+    TIntermTyped *intermLeft = intermAssignment->getLeft();
     if (!intermLeft)
         return;
 
-    TGraphSymbol* leftmostSymbol = NULL;
+    TGraphSymbol *leftmostSymbol = NULL;
 
     {
         TNodeSetMaintainer nodeSetMaintainer(this);
@@ -120,88 +135,100 @@ void TDependencyGraphBuilder::visitAssignment(TIntermBinary* intermAssignment)
             intermLeft->traverse(this);
             leftmostSymbol = mLeftmostSymbols.top();
 
-            // After traversing the left subtree of this assignment, we should have found a real
-            // leftmost symbol, and the leftmost symbol should not be a placeholder.
+            // After traversing the left subtree of this assignment, we should
+            // have found a real leftmost symbol, and the leftmost symbol should
+            // not be a placeholder.
             ASSERT(leftmostSymbol != &mLeftSubtree);
             ASSERT(leftmostSymbol != &mRightSubtree);
         }
 
-        if (TIntermTyped* intermRight = intermAssignment->getRight()) {
+        if (TIntermTyped *intermRight = intermAssignment->getRight())
+        {
             TLeftmostSymbolMaintainer leftmostSymbolMaintainer(this, mRightSubtree);
             intermRight->traverse(this);
         }
 
-        if (TParentNodeSet* assignmentNodes = mNodeSets.getTopSet())
+        if (TParentNodeSet *assignmentNodes = mNodeSets.getTopSet())
             connectMultipleNodesToSingleNode(assignmentNodes, leftmostSymbol);
     }
 
-    // Push the leftmost symbol of this assignment into the current set of dependent symbols to
-    // represent the result of this assignment.
-    // An expression like "a = (b = c)" will yield a dependency graph like "c -> b -> a".
-    // This line essentially passes the leftmost symbol of the nested assignment ("b" in this
-    // example) back up to the earlier visitAssignment call for the outer assignment, which will
-    // create the connection "b -> a".
+    // Push the leftmost symbol of this assignment into the current set of dependent
+    // symbols to represent the result of this assignment.
+    // An expression like "a = (b = c)" will yield a dependency graph like
+    // "c -> b -> a".
+    // This line essentially passes the leftmost symbol of the nested assignment
+    // ("b" in this example) back up to the earlier visitAssignment call for the
+    // outer assignment, which will create the connection "b -> a".
     mNodeSets.insertIntoTopSet(leftmostSymbol);
 }
 
-void TDependencyGraphBuilder::visitLogicalOp(TIntermBinary* intermLogicalOp)
+void TDependencyGraphBuilder::visitLogicalOp(TIntermBinary *intermLogicalOp)
 {
-    if (TIntermTyped* intermLeft = intermLogicalOp->getLeft()) {
+    if (TIntermTyped *intermLeft = intermLogicalOp->getLeft())
+    {
         TNodeSetPropagatingMaintainer nodeSetMaintainer(this);
 
         intermLeft->traverse(this);
-        if (TParentNodeSet* leftNodes = mNodeSets.getTopSet()) {
-            TGraphLogicalOp* logicalOp = mGraph->createLogicalOp(intermLogicalOp);
+        if (TParentNodeSet *leftNodes = mNodeSets.getTopSet())
+        {
+            TGraphLogicalOp *logicalOp = mGraph->createLogicalOp(intermLogicalOp);
             connectMultipleNodesToSingleNode(leftNodes, logicalOp);
         }
     }
 
-    if (TIntermTyped* intermRight = intermLogicalOp->getRight()) {
+    if (TIntermTyped *intermRight = intermLogicalOp->getRight())
+    {
         TLeftmostSymbolMaintainer leftmostSymbolMaintainer(this, mRightSubtree);
         intermRight->traverse(this);
     }
 }
 
-void TDependencyGraphBuilder::visitBinaryChildren(TIntermBinary* intermBinary)
+void TDependencyGraphBuilder::visitBinaryChildren(TIntermBinary *intermBinary)
 {
-    if (TIntermTyped* intermLeft = intermBinary->getLeft())
+    if (TIntermTyped *intermLeft = intermBinary->getLeft())
         intermLeft->traverse(this);
 
-    if (TIntermTyped* intermRight = intermBinary->getRight()) {
+    if (TIntermTyped *intermRight = intermBinary->getRight())
+    {
         TLeftmostSymbolMaintainer leftmostSymbolMaintainer(this, mRightSubtree);
         intermRight->traverse(this);
     }
 }
 
-bool TDependencyGraphBuilder::visitSelection(Visit visit, TIntermSelection* intermSelection)
+bool TDependencyGraphBuilder::visitSelection(
+    Visit visit, TIntermSelection *intermSelection)
 {
-    if (TIntermNode* intermCondition = intermSelection->getCondition()) {
+    if (TIntermNode *intermCondition = intermSelection->getCondition())
+    {
         TNodeSetMaintainer nodeSetMaintainer(this);
 
         intermCondition->traverse(this);
-        if (TParentNodeSet* conditionNodes = mNodeSets.getTopSet()) {
-            TGraphSelection* selection = mGraph->createSelection(intermSelection);
+        if (TParentNodeSet *conditionNodes = mNodeSets.getTopSet())
+        {
+            TGraphSelection *selection = mGraph->createSelection(intermSelection);
             connectMultipleNodesToSingleNode(conditionNodes, selection);
         }
     }
 
-    if (TIntermNode* intermTrueBlock = intermSelection->getTrueBlock())
+    if (TIntermNode *intermTrueBlock = intermSelection->getTrueBlock())
         intermTrueBlock->traverse(this);
 
-    if (TIntermNode* intermFalseBlock = intermSelection->getFalseBlock())
+    if (TIntermNode *intermFalseBlock = intermSelection->getFalseBlock())
         intermFalseBlock->traverse(this);
 
     return false;
 }
 
-bool TDependencyGraphBuilder::visitLoop(Visit visit, TIntermLoop* intermLoop)
+bool TDependencyGraphBuilder::visitLoop(Visit visit, TIntermLoop *intermLoop)
 {
-    if (TIntermTyped* intermCondition = intermLoop->getCondition()) {
+    if (TIntermTyped *intermCondition = intermLoop->getCondition())
+    {
         TNodeSetMaintainer nodeSetMaintainer(this);
 
         intermCondition->traverse(this);
-        if (TParentNodeSet* conditionNodes = mNodeSets.getTopSet()) {
-            TGraphLoop* loop = mGraph->createLoop(intermLoop);
+        if (TParentNodeSet *conditionNodes = mNodeSets.getTopSet())
+        {
+            TGraphLoop *loop = mGraph->createLoop(intermLoop);
             connectMultipleNodesToSingleNode(conditionNodes, loop);
         }
     }
@@ -209,19 +236,20 @@ bool TDependencyGraphBuilder::visitLoop(Visit visit, TIntermLoop* intermLoop)
     if (TIntermNode* intermBody = intermLoop->getBody())
         intermBody->traverse(this);
 
-    if (TIntermTyped* intermExpression = intermLoop->getExpression())
+    if (TIntermTyped *intermExpression = intermLoop->getExpression())
         intermExpression->traverse(this);
 
     return false;
 }
 
 
-void TDependencyGraphBuilder::connectMultipleNodesToSingleNode(TParentNodeSet* nodes,
-                                                               TGraphNode* node) const
+void TDependencyGraphBuilder::connectMultipleNodesToSingleNode(
+    TParentNodeSet *nodes, TGraphNode *node) const
 {
-    for (TParentNodeSet::const_iterator iter = nodes->begin(); iter != nodes->end(); ++iter)
+    for (TParentNodeSet::const_iterator iter = nodes->begin();
+         iter != nodes->end(); ++iter)
     {
-        TGraphParentNode* currentNode = *iter;
+        TGraphParentNode *currentNode = *iter;
         currentNode->addDependentNode(node);
     }
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.h b/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.h
index 3e928fb77e..b76f075e68 100644
--- a/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.h
+++ b/src/3rdparty/angle/src/compiler/translator/depgraph/DependencyGraphBuilder.h
@@ -4,55 +4,58 @@
 // found in the LICENSE file.
 //
 
-#ifndef COMPILER_DEPGRAPH_DEPENDENCY_GRAPH_BUILDER_H
-#define COMPILER_DEPGRAPH_DEPENDENCY_GRAPH_BUILDER_H
+#ifndef COMPILER_TRANSLATOR_DEPGRAPH_DEPENDENCY_GRAPH_BUILDER_H
+#define COMPILER_TRANSLATOR_DEPGRAPH_DEPENDENCY_GRAPH_BUILDER_H
 
 #include "compiler/translator/depgraph/DependencyGraph.h"
 
 //
-// Creates a dependency graph of symbols, function calls, conditions etc. by traversing a
-// intermediate tree.
+// Creates a dependency graph of symbols, function calls, conditions etc. by
+// traversing a intermediate tree.
 //
-class TDependencyGraphBuilder : public TIntermTraverser {
-public:
-    static void build(TIntermNode* node, TDependencyGraph* graph);
+class TDependencyGraphBuilder : public TIntermTraverser
+{
+  public:
+    static void build(TIntermNode *node, TDependencyGraph *graph);
 
-    virtual void visitSymbol(TIntermSymbol*);
-    virtual bool visitBinary(Visit visit, TIntermBinary*);
-    virtual bool visitSelection(Visit visit, TIntermSelection*);
-    virtual bool visitAggregate(Visit visit, TIntermAggregate*);
-    virtual bool visitLoop(Visit visit, TIntermLoop*);
+    virtual void visitSymbol(TIntermSymbol *);
+    virtual bool visitBinary(Visit visit, TIntermBinary *);
+    virtual bool visitSelection(Visit visit, TIntermSelection *);
+    virtual bool visitAggregate(Visit visit, TIntermAggregate *);
+    virtual bool visitLoop(Visit visit, TIntermLoop *);
 
-private:
-    typedef std::stack<TGraphSymbol*> TSymbolStack;
-    typedef std::set<TGraphParentNode*> TParentNodeSet;
+  private:
+    typedef std::stack<TGraphSymbol *> TSymbolStack;
+    typedef std::set<TGraphParentNode *> TParentNodeSet;
 
     //
     // For collecting the dependent nodes of assignments, conditions, etc.
     // while traversing the intermediate tree.
     //
-    // This data structure is stack of sets. Each set contains dependency graph parent nodes.
+    // This data structure is stack of sets. Each set contains dependency graph
+    // parent nodes.
     //
-    class TNodeSetStack {
-    public:
+    class TNodeSetStack
+    {
+      public:
         TNodeSetStack() {};
         ~TNodeSetStack() { clear(); }
 
         // This should only be called after a pushSet.
         // Returns NULL if the top set is empty.
-        TParentNodeSet* getTopSet() const
+        TParentNodeSet *getTopSet() const
         {
-            ASSERT(!nodeSets.empty());
-            TParentNodeSet* topSet = nodeSets.top();
+            ASSERT(!mNodeSets.empty());
+            TParentNodeSet *topSet = mNodeSets.top();
             return !topSet->empty() ? topSet : NULL;
         }
 
-        void pushSet() { nodeSets.push(new TParentNodeSet()); }
+        void pushSet() { mNodeSets.push(new TParentNodeSet()); }
         void popSet()
         {
-            ASSERT(!nodeSets.empty());
-            delete nodeSets.top();
-            nodeSets.pop();
+            ASSERT(!mNodeSets.empty());
+            delete mNodeSets.top();
+            mNodeSets.pop();
         }
 
         // Pops the top set and adds its contents to the new top set.
@@ -60,12 +63,13 @@ private:
         // If there is no set below the top set, the top set is just deleted.
         void popSetIntoNext()
         {
-            ASSERT(!nodeSets.empty());
-            TParentNodeSet* oldTopSet = nodeSets.top();
-            nodeSets.pop();
+            ASSERT(!mNodeSets.empty());
+            TParentNodeSet *oldTopSet = mNodeSets.top();
+            mNodeSets.pop();
 
-            if (!nodeSets.empty()) {
-                TParentNodeSet* newTopSet = nodeSets.top();
+            if (!mNodeSets.empty())
+            {
+                TParentNodeSet *newTopSet = mNodeSets.top();
                 newTopSet->insert(oldTopSet->begin(), oldTopSet->end());
             }
 
@@ -76,106 +80,120 @@ private:
         // This can be called when there is no top set if we are visiting
         // symbols that are not under an assignment or condition.
         // We don't need to track those symbols.
-        void insertIntoTopSet(TGraphParentNode* node)
+        void insertIntoTopSet(TGraphParentNode *node)
         {
-            if (nodeSets.empty())
+            if (mNodeSets.empty())
                 return;
 
-            nodeSets.top()->insert(node);
+            mNodeSets.top()->insert(node);
         }
 
         void clear()
         {
-            while (!nodeSets.empty())
+            while (!mNodeSets.empty())
                 popSet();
         }
 
-    private:
-        typedef std::stack<TParentNodeSet*> TParentNodeSetStack;
+      private:
+        typedef std::stack<TParentNodeSet *> TParentNodeSetStack;
 
-        TParentNodeSetStack nodeSets;
+        TParentNodeSetStack mNodeSets;
     };
 
     //
     // An instance of this class pushes a new node set when instantiated.
     // When the instance goes out of scope, it and pops the node set.
     //
-    class TNodeSetMaintainer {
-    public:
-        TNodeSetMaintainer(TDependencyGraphBuilder* factory)
-            : sets(factory->mNodeSets) { sets.pushSet(); }
-        ~TNodeSetMaintainer() { sets.popSet(); }
-    protected:
-        TNodeSetStack& sets;
+    class TNodeSetMaintainer
+    {
+      public:
+        TNodeSetMaintainer(TDependencyGraphBuilder *factory)
+            : mSets(factory->mNodeSets)
+        {
+            mSets.pushSet();
+        }
+        ~TNodeSetMaintainer() { mSets.popSet(); }
+      protected:
+        TNodeSetStack &mSets;
     };
 
     //
     // An instance of this class pushes a new node set when instantiated.
-    // When the instance goes out of scope, it and pops the top node set and adds its contents to
-    // the new top node set.
+    // When the instance goes out of scope, it and pops the top node set and adds
+    // its contents to the new top node set.
     //
-    class TNodeSetPropagatingMaintainer {
-    public:
-        TNodeSetPropagatingMaintainer(TDependencyGraphBuilder* factory)
-            : sets(factory->mNodeSets) { sets.pushSet(); }
-        ~TNodeSetPropagatingMaintainer() { sets.popSetIntoNext(); }
-    protected:
-        TNodeSetStack& sets;
+    class TNodeSetPropagatingMaintainer
+    {
+      public:
+        TNodeSetPropagatingMaintainer(TDependencyGraphBuilder *factory)
+            : mSets(factory->mNodeSets)
+        {
+            mSets.pushSet();
+        }
+        ~TNodeSetPropagatingMaintainer() { mSets.popSetIntoNext(); }
+      protected:
+        TNodeSetStack &mSets;
     };
 
     //
-    // An instance of this class keeps track of the leftmost symbol while we're exploring an
-    // assignment.
-    // It will push the placeholder symbol kLeftSubtree when instantiated under a left subtree,
-    // and kRightSubtree under a right subtree.
-    // When it goes out of scope, it will pop the leftmost symbol at the top of the scope.
-    // During traversal, the TDependencyGraphBuilder will replace kLeftSubtree with a real symbol.
-    // kRightSubtree will never be replaced by a real symbol because we are tracking the leftmost
-    // symbol.
+    // An instance of this class keeps track of the leftmost symbol while we're
+    // exploring an assignment.
+    // It will push the placeholder symbol kLeftSubtree when instantiated under a
+    // left subtree, and kRightSubtree under a right subtree.
+    // When it goes out of scope, it will pop the leftmost symbol at the top of the
+    // scope.
+    // During traversal, the TDependencyGraphBuilder will replace kLeftSubtree with
+    // a real symbol.
+    // kRightSubtree will never be replaced by a real symbol because we are tracking
+    // the leftmost symbol.
     //
-    class TLeftmostSymbolMaintainer {
-    public:
-        TLeftmostSymbolMaintainer(TDependencyGraphBuilder* factory, TGraphSymbol& subtree)
-            : leftmostSymbols(factory->mLeftmostSymbols)
+    class TLeftmostSymbolMaintainer
+    {
+      public:
+        TLeftmostSymbolMaintainer(
+            TDependencyGraphBuilder *factory, TGraphSymbol &subtree)
+            : mLeftmostSymbols(factory->mLeftmostSymbols)
         {
-            needsPlaceholderSymbol = leftmostSymbols.empty() || leftmostSymbols.top() != &subtree;
-            if (needsPlaceholderSymbol)
-                leftmostSymbols.push(&subtree);
+            mNeedsPlaceholderSymbol =
+                mLeftmostSymbols.empty() || mLeftmostSymbols.top() != &subtree;
+            if (mNeedsPlaceholderSymbol)
+                mLeftmostSymbols.push(&subtree);
         }
 
         ~TLeftmostSymbolMaintainer()
         {
-            if (needsPlaceholderSymbol)
-                leftmostSymbols.pop();
+            if (mNeedsPlaceholderSymbol)
+                mLeftmostSymbols.pop();
         }
 
-    protected:
-        TSymbolStack& leftmostSymbols;
-        bool needsPlaceholderSymbol;
+      protected:
+        TSymbolStack& mLeftmostSymbols;
+        bool mNeedsPlaceholderSymbol;
     };
 
-    TDependencyGraphBuilder(TDependencyGraph* graph)
-        : TIntermTraverser(true, false, false)
-        , mLeftSubtree(NULL)
-        , mRightSubtree(NULL)
-        , mGraph(graph) {}
-    void build(TIntermNode* intermNode) { intermNode->traverse(this); }
+    TDependencyGraphBuilder(TDependencyGraph *graph)
+        : TIntermTraverser(true, false, false),
+          mLeftSubtree(NULL),
+          mRightSubtree(NULL),
+          mGraph(graph) {}
+    void build(TIntermNode *intermNode) { intermNode->traverse(this); }
 
-    void connectMultipleNodesToSingleNode(TParentNodeSet* nodes, TGraphNode* node) const;
+    void connectMultipleNodesToSingleNode(
+        TParentNodeSet *nodes, TGraphNode *node) const;
 
-    void visitAssignment(TIntermBinary*);
-    void visitLogicalOp(TIntermBinary*);
-    void visitBinaryChildren(TIntermBinary*);
-    void visitFunctionDefinition(TIntermAggregate*);
-    void visitFunctionCall(TIntermAggregate* intermFunctionCall);
-    void visitAggregateChildren(TIntermAggregate*);
+    void visitAssignment(TIntermBinary *);
+    void visitLogicalOp(TIntermBinary *);
+    void visitBinaryChildren(TIntermBinary *);
+    void visitFunctionDefinition(TIntermAggregate *);
+    void visitFunctionCall(TIntermAggregate *intermFunctionCall);
+    void visitAggregateChildren(TIntermAggregate *);
 
     TGraphSymbol mLeftSubtree;
     TGraphSymbol mRightSubtree;
 
-    TDependencyGraph* mGraph;
+    TDependencyGraph *mGraph;
     TNodeSetStack mNodeSets;
     TSymbolStack mLeftmostSymbols;
 };
 
-#endif  // COMPILER_DEPGRAPH_DEPENDENCY_GRAPH_BUILDER_H
+#endif  // COMPILER_TRANSLATOR_DEPGRAPH_DEPENDENCY_GRAPH_BUILDER_H
diff --git a/src/3rdparty/angle/src/compiler/translator/glslang.l b/src/3rdparty/angle/src/compiler/translator/glslang.l
index ffc1aa18ac..518b78df11 100644
--- a/src/3rdparty/angle/src/compiler/translator/glslang.l
+++ b/src/3rdparty/angle/src/compiler/translator/glslang.l
@@ -1,6 +1,6 @@
 /*
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -15,7 +15,7 @@ WHICH GENERATES THE GLSL ES LEXER (glslang_lex.cpp).
 
 %top{
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -40,6 +40,7 @@ WHICH GENERATES THE GLSL ES LEXER (glslang_lex.cpp).
 #include "compiler/translator/ParseContext.h"
 #include "compiler/preprocessor/Token.h"
 #include "compiler/translator/util.h"
+#include "compiler/translator/length_limits.h"
 #include "glslang_tab.h"
 
 /* windows only pragma */
@@ -57,8 +58,13 @@ WHICH GENERATES THE GLSL ES LEXER (glslang_lex.cpp).
 static yy_size_t string_input(char* buf, yy_size_t max_size, yyscan_t yyscanner);
 static int check_type(yyscan_t yyscanner);
 static int reserved_word(yyscan_t yyscanner);
+static int ES2_reserved_ES3_keyword(TParseContext *context, int token);
+static int ES2_keyword_ES3_reserved(TParseContext *context, int token);
+static int ES2_ident_ES3_keyword(TParseContext *context, int token);
+static int uint_constant(TParseContext *context);
 static int int_constant(yyscan_t yyscanner);
 static int float_constant(yyscan_t yyscanner);
+static int floatsuffix_check(TParseContext* context);
 %}
 
 %option noyywrap nounput never-interactive
@@ -73,16 +79,20 @@ O           [0-7]
 
 %%
 
+%{
+    TParseContext* context = yyextra;
+%}
+
 "invariant"    { return INVARIANT; }
 "highp"        { return HIGH_PRECISION; }
 "mediump"      { return MEDIUM_PRECISION; }
 "lowp"         { return LOW_PRECISION; }
 "precision"    { return PRECISION; }
 
-"attribute"    { return ATTRIBUTE; }
+"attribute"    { return ES2_keyword_ES3_reserved(context, ATTRIBUTE); }
 "const"        { return CONST_QUAL; }
 "uniform"      { return UNIFORM; }
-"varying"      { return VARYING; }
+"varying"      { return ES2_keyword_ES3_reserved(context, VARYING); }
 
 "break"        { return BREAK; }
 "continue"     { return CONTINUE; }
@@ -92,6 +102,13 @@ O           [0-7]
 
 "if"           { return IF; }
 "else"         { return ELSE; }
+"switch"       { return ES2_reserved_ES3_keyword(context, SWITCH); }
+"case"         { return ES2_ident_ES3_keyword(context, CASE); }
+"default"      { return ES2_reserved_ES3_keyword(context, DEFAULT); }
+
+"centroid"     { return ES2_ident_ES3_keyword(context, CENTROID); }
+"flat"         { return ES2_reserved_ES3_keyword(context, FLAT); }
+"smooth"       { return ES2_ident_ES3_keyword(context, SMOOTH); }
 
 "in"           { return IN_QUAL; }
 "out"          { return OUT_QUAL; }
@@ -99,6 +116,7 @@ O           [0-7]
 
 "float"        { return FLOAT_TYPE; }
 "int"          { return INT_TYPE; }
+"uint"         { return ES2_ident_ES3_keyword(context, UINT_TYPE); }
 "void"         { return VOID_TYPE; }
 "bool"         { return BOOL_TYPE; }
 "true"         { yylval->lex.b = true;  return BOOLCONSTANT; }
@@ -111,6 +129,17 @@ O           [0-7]
 "mat3"         { return MATRIX3; }
 "mat4"         { return MATRIX4; }
 
+"mat2x2"         { return ES2_ident_ES3_keyword(context, MATRIX2); }
+"mat3x3"         { return ES2_ident_ES3_keyword(context, MATRIX3); }
+"mat4x4"         { return ES2_ident_ES3_keyword(context, MATRIX4); }
+
+"mat2x3"         { return ES2_ident_ES3_keyword(context, MATRIX2x3); }
+"mat3x2"         { return ES2_ident_ES3_keyword(context, MATRIX3x2); }
+"mat2x4"         { return ES2_ident_ES3_keyword(context, MATRIX2x4); }
+"mat4x2"         { return ES2_ident_ES3_keyword(context, MATRIX4x2); }
+"mat3x4"         { return ES2_ident_ES3_keyword(context, MATRIX3x4); }
+"mat4x3"         { return ES2_ident_ES3_keyword(context, MATRIX4x3); }
+
 "vec2"         { return VEC2; }
 "vec3"         { return VEC3; }
 "vec4"         { return VEC4; }
@@ -120,70 +149,160 @@ O           [0-7]
 "bvec2"        { return BVEC2; }
 "bvec3"        { return BVEC3; }
 "bvec4"        { return BVEC4; }
-
-"sampler2D"          { return SAMPLER2D; }
-"samplerCube"        { return SAMPLERCUBE; }
-"samplerExternalOES" { return SAMPLER_EXTERNAL_OES; }
-"sampler2DRect"      { return SAMPLER2DRECT; }
+"uvec2"        { return ES2_ident_ES3_keyword(context, UVEC2); }
+"uvec3"        { return ES2_ident_ES3_keyword(context, UVEC3); }
+"uvec4"        { return ES2_ident_ES3_keyword(context, UVEC4); }
+
+"sampler2D"            { return SAMPLER2D; }
+"samplerCube"          { return SAMPLERCUBE; }
+"samplerExternalOES"   { return SAMPLER_EXTERNAL_OES; }
+"sampler3D"            { return ES2_reserved_ES3_keyword(context, SAMPLER3D); }
+"sampler3DRect"        { return ES2_reserved_ES3_keyword(context, SAMPLER3DRECT); }
+"sampler2DRect"        { return SAMPLER2DRECT; }
+"sampler2DArray"       { return ES2_ident_ES3_keyword(context, SAMPLER2DARRAY); }
+"isampler2D"           { return ES2_ident_ES3_keyword(context, ISAMPLER2D); }
+"isampler3D"           { return ES2_ident_ES3_keyword(context, ISAMPLER3D); }
+"isamplerCube"         { return ES2_ident_ES3_keyword(context, ISAMPLERCUBE); }
+"isampler2DArray"      { return ES2_ident_ES3_keyword(context, ISAMPLER2DARRAY); }
+"usampler2D"           { return ES2_ident_ES3_keyword(context, USAMPLER2D); }
+"usampler3D"           { return ES2_ident_ES3_keyword(context, USAMPLER3D); }
+"usamplerCube"         { return ES2_ident_ES3_keyword(context, USAMPLERCUBE); }
+"usampler2DArray"      { return ES2_ident_ES3_keyword(context, USAMPLER2DARRAY); }
+"sampler2DShadow"      { return ES2_reserved_ES3_keyword(context, SAMPLER2DSHADOW); }
+"samplerCubeShadow"    { return ES2_ident_ES3_keyword(context, SAMPLERCUBESHADOW); }
+"sampler2DArrayShadow" { return ES2_ident_ES3_keyword(context, SAMPLER2DARRAYSHADOW); }
 
 "struct"       { return STRUCT; }
 
-"asm"          { return reserved_word(yyscanner); }
-
-"class"        { return reserved_word(yyscanner); }
-"union"        { return reserved_word(yyscanner); }
-"enum"         { return reserved_word(yyscanner); }
-"typedef"      { return reserved_word(yyscanner); }
-"template"     { return reserved_word(yyscanner); }
-"this"         { return reserved_word(yyscanner); }
-"packed"       { return reserved_word(yyscanner); }
-
-"goto"         { return reserved_word(yyscanner); }
-"switch"       { return reserved_word(yyscanner); }
-"default"      { return reserved_word(yyscanner); }
-
-"inline"       { return reserved_word(yyscanner); }
-"noinline"     { return reserved_word(yyscanner); }
-"volatile"     { return reserved_word(yyscanner); }
-"public"       { return reserved_word(yyscanner); }
-"static"       { return reserved_word(yyscanner); }
-"extern"       { return reserved_word(yyscanner); }
-"external"     { return reserved_word(yyscanner); }
-"interface"    { return reserved_word(yyscanner); }
-"flat"         { return reserved_word(yyscanner); }
-
-"long"         { return reserved_word(yyscanner); }
-"short"        { return reserved_word(yyscanner); }
-"double"       { return reserved_word(yyscanner); }
-"half"         { return reserved_word(yyscanner); }
-"fixed"        { return reserved_word(yyscanner); }
-"unsigned"     { return reserved_word(yyscanner); }
-"superp"       { return reserved_word(yyscanner); }
-
-"input"        { return reserved_word(yyscanner); }
-"output"       { return reserved_word(yyscanner); }
-
-"hvec2"        { return reserved_word(yyscanner); }
-"hvec3"        { return reserved_word(yyscanner); }
-"hvec4"        { return reserved_word(yyscanner); }
-"dvec2"        { return reserved_word(yyscanner); }
-"dvec3"        { return reserved_word(yyscanner); }
-"dvec4"        { return reserved_word(yyscanner); }
-"fvec2"        { return reserved_word(yyscanner); }
-"fvec3"        { return reserved_word(yyscanner); }
-"fvec4"        { return reserved_word(yyscanner); }
-
-"sampler1D"           { return reserved_word(yyscanner); }
-"sampler3D"           { return reserved_word(yyscanner); }
-"sampler1DShadow"     { return reserved_word(yyscanner); }
-"sampler2DShadow"     { return reserved_word(yyscanner); }
-"sampler3DRect"       { return reserved_word(yyscanner); }
-"sampler2DRectShadow" { return reserved_word(yyscanner); }
-
-"sizeof"       { return reserved_word(yyscanner); }
-"cast"         { return reserved_word(yyscanner); }
-
-"namespace"    { return reserved_word(yyscanner); }
+"layout"  { return ES2_ident_ES3_keyword(context, LAYOUT); }
+
+    /* Reserved keywords for GLSL ES 3.00 that are not reserved for GLSL ES 1.00 */
+"coherent"          |
+"restrict"          |
+"readonly"          |
+"writeonly"         |
+"resource"          |
+"atomic_uint"       |
+"noperspective"     |
+"patch"             |
+"sample"            |
+"subroutine"        |
+"common"            |
+"partition"         |
+"active"            |
+
+"filter"            |
+"image1D"           |
+"image2D"           |
+"image3D"           |
+"imageCube"	        |
+"iimage1D"          |
+"iimage2D"          |
+"iimage3D"          |
+"iimageCube"        |
+"uimage1D"          |
+"uimage2D"          |
+"uimage3D"          |
+"uimageCube"        |
+"image1DArray"      |
+"image2DArray"      |
+"iimage1DArray"     |
+"iimage2DArray"     |
+"uimage1DArray"     |
+"uimage2DArray"     |
+"image1DShadow"     |
+"image2DShadow"     |
+"image1DArrayShadow" |
+"image2DArrayShadow" |
+"imageBuffer"       |
+"iimageBuffer"      |
+"uimageBuffer"      |
+
+"sampler1DArray"    |
+"sampler1DArrayShadow" |
+"isampler1D"        |
+"isampler1DArray"   |
+"usampler1D"        |
+"usampler1DArray"   |
+"isampler2DRect"    |
+"usampler2DRect"    |
+"samplerBuffer"     |
+"isamplerBuffer"    |
+"usamplerBuffer"    |
+"sampler2DMS"       |
+"isampler2DMS"      |
+"usampler2DMS"      |
+"sampler2DMSArray"  |
+"isampler2DMSArray" |
+"usampler2DMSArray" { 
+    if (context->shaderVersion < 300) {
+		yylval->lex.string = NewPoolTString(yytext); 
+	    return check_type(yyscanner); 
+	}
+	return reserved_word(yyscanner);
+}
+
+    /* Reserved keywords in GLSL ES 1.00 that are not reserved in GLSL ES 3.00 */
+"packed"  {
+    if (context->shaderVersion >= 300)
+    {
+        yylval->lex.string = NewPoolTString(yytext);
+        return check_type(yyscanner);
+    }
+
+    return reserved_word(yyscanner);
+}
+
+    /* Reserved keywords */
+"asm"          |
+
+"class"        |
+"union"        |
+"enum"         |
+"typedef"      |
+"template"     |
+"this"         |
+
+"goto"         |
+
+"inline"       |
+"noinline"     |
+"volatile"     |
+"public"       |
+"static"       |
+"extern"       |
+"external"     |
+"interface"    |
+
+"long"         |
+"short"        |
+"double"       |
+"half"         |
+"fixed"        |
+"unsigned"     |
+"superp"       |
+
+"input"        |
+"output"       |
+
+"hvec2"        |
+"hvec3"        |
+"hvec4"        |
+"dvec2"        |
+"dvec3"        |
+"dvec4"        |
+"fvec2"        |
+"fvec3"        |
+"fvec4"        |
+
+"sampler1D"    |
+"sampler1DShadow" |
+"sampler2DRectShadow" |
+
+"sizeof"       |
+"cast"         |
+
+"namespace"    |
 "using"        { return reserved_word(yyscanner); }
 
 {L}({L}|{D})*       {
@@ -195,10 +314,18 @@ O           [0-7]
 0{O}+             { return int_constant(yyscanner); }
 {D}+              { return int_constant(yyscanner); }
 
+0[xX]{H}+[uU]     { return uint_constant(context); }
+0{O}+[uU]         { return uint_constant(context); }
+{D}+[uU]          { return uint_constant(context); }
+
 {D}+{E}           { return float_constant(yyscanner); }
 {D}+"."{D}*({E})? { return float_constant(yyscanner); }
 "."{D}+({E})?     { return float_constant(yyscanner); }
 
+{D}+{E}[fF]           { return floatsuffix_check(context); }
+{D}+"."{D}*({E})?[fF] { return floatsuffix_check(context); }
+"."{D}+({E})?[fF]     { return floatsuffix_check(context); }
+
 "+="            { return ADD_ASSIGN; }
 "-="            { return SUB_ASSIGN; }
 "*="            { return MUL_ASSIGN; }
@@ -224,31 +351,31 @@ O           [0-7]
 ";"             { return SEMICOLON; }
 ("{"|"<%")      { return LEFT_BRACE; }
 ("}"|"%>")      { return RIGHT_BRACE; }
-","         { return COMMA; }
-":"         { return COLON; }
-"="         { return EQUAL; }
-"("         { return LEFT_PAREN; }
-")"         { return RIGHT_PAREN; }
-("["|"<:")  { return LEFT_BRACKET; }
-("]"|":>")  { return RIGHT_BRACKET; }
-"."         { return DOT; }
-"!"         { return BANG; }
-"-"         { return DASH; }
-"~"         { return TILDE; }
-"+"         { return PLUS; }
-"*"         { return STAR; }
-"/"         { return SLASH; }
-"%"         { return PERCENT; }
-"<"         { return LEFT_ANGLE; }
-">"         { return RIGHT_ANGLE; }
-"|"         { return VERTICAL_BAR; }
-"^"         { return CARET; }
-"&"         { return AMPERSAND; }
-"?"         { return QUESTION; }
+","             { return COMMA; }
+":"             { return COLON; }
+"="             { return EQUAL; }
+"("             { return LEFT_PAREN; }
+")"             { return RIGHT_PAREN; }
+("["|"<:")      { return LEFT_BRACKET; }
+("]"|":>")      { return RIGHT_BRACKET; }
+"."             { return DOT; }
+"!"             { return BANG; }
+"-"             { return DASH; }
+"~"             { return TILDE; }
+"+"             { return PLUS; }
+"*"             { return STAR; }
+"/"             { return SLASH; }
+"%"             { return PERCENT; }
+"<"             { return LEFT_ANGLE; }
+">"             { return RIGHT_ANGLE; }
+"|"             { return VERTICAL_BAR; }
+"^"             { return CARET; }
+"&"             { return AMPERSAND; }
+"?"             { return QUESTION; }
 
 [ \t\v\n\f\r] { }
-<<EOF>>    { yyterminate(); }
-.          { assert(false); return 0; }
+<<EOF>>       { yyterminate(); }
+.             { assert(false); return 0; }
 
 %%
 
@@ -272,11 +399,12 @@ int check_type(yyscan_t yyscanner) {
     struct yyguts_t* yyg = (struct yyguts_t*) yyscanner;
     
     int token = IDENTIFIER;
-    TSymbol* symbol = yyextra->symbolTable.find(yytext);
+    TSymbol* symbol = yyextra->symbolTable.find(yytext, yyextra->shaderVersion);
     if (symbol && symbol->isVariable()) {
         TVariable* variable = static_cast<TVariable*>(symbol);
-        if (variable->isUserType())
+        if (variable->isUserType()) {
             token = TYPE_NAME;
+        }
     }
     yylval->lex.symbol = symbol;
     return token;
@@ -290,6 +418,80 @@ int reserved_word(yyscan_t yyscanner) {
     return 0;
 }
 
+int ES2_reserved_ES3_keyword(TParseContext *context, int token)
+{
+    yyscan_t yyscanner = (yyscan_t) context->scanner;
+
+    if (context->shaderVersion < 300)
+    {
+        return reserved_word(yyscanner);
+    }
+
+    return token;
+}
+
+int ES2_keyword_ES3_reserved(TParseContext *context, int token)
+{
+    yyscan_t yyscanner = (yyscan_t) context->scanner;
+
+    if (context->shaderVersion >= 300)
+    {
+        return reserved_word(yyscanner);
+    }
+
+    return token;
+}
+
+int ES2_ident_ES3_keyword(TParseContext *context, int token)
+{
+    struct yyguts_t* yyg = (struct yyguts_t*) context->scanner;
+    yyscan_t yyscanner = (yyscan_t) context->scanner;
+
+    // not a reserved word in GLSL ES 1.00, so could be used as an identifier/type name
+    if (context->shaderVersion < 300)
+    {
+        yylval->lex.string = NewPoolTString(yytext);
+        return check_type(yyscanner);
+    }
+
+    return token;
+}
+
+int uint_constant(TParseContext *context)
+{
+    struct yyguts_t* yyg = (struct yyguts_t*) context->scanner;
+    yyscan_t yyscanner = (yyscan_t) context->scanner;
+
+    if (context->shaderVersion < 300)
+    {
+        context->error(*yylloc, "Unsigned integers are unsupported prior to GLSL ES 3.00", yytext, "");
+        context->recover();
+        return 0;
+    }
+
+    if (!atoi_clamp(yytext, &(yylval->lex.i)))
+        yyextra->warning(*yylloc, "Integer overflow", yytext, "");
+
+    return UINTCONSTANT;
+}
+
+int floatsuffix_check(TParseContext* context)
+{
+    struct yyguts_t* yyg = (struct yyguts_t*) context->scanner;
+
+    if (context->shaderVersion < 300)
+    {
+        context->error(*yylloc, "Floating-point suffix unsupported prior to GLSL ES 3.00", yytext);
+        context->recover();
+        return 0;
+    }
+
+    if (!atof_clamp(yytext, &(yylval->lex.f)))
+        yyextra->warning(*yylloc, "Float overflow", yytext, "");
+
+    return(FLOATCONSTANT);
+}
+
 void yyerror(YYLTYPE* lloc, TParseContext* context, const char* reason) {
     context->error(*lloc, reason, yyget_text(context->scanner));
     context->recover();
@@ -339,7 +541,6 @@ int glslang_scan(size_t count, const char* const string[], const int length[],
     // Initialize preprocessor.
     if (!context->preprocessor.init(count, string, length))
         return 1;
-    context->preprocessor.setMaxTokenLength(SH_MAX_TOKEN_LENGTH);
 
     // Define extension macros.
     const TExtensionBehavior& extBehavior = context->extensionBehavior();
@@ -350,6 +551,8 @@ int glslang_scan(size_t count, const char* const string[], const int length[],
     if (context->fragmentPrecisionHigh)
         context->preprocessor.predefineMacro("GL_FRAGMENT_PRECISION_HIGH", 1);
 
+    context->preprocessor.setMaxTokenSize(GetGlobalMaxTokenSize(context->shaderSpec));
+
     return 0;
 }
 
diff --git a/src/3rdparty/angle/src/compiler/translator/glslang.y b/src/3rdparty/angle/src/compiler/translator/glslang.y
index 7614ff3447..5c945ad5ad 100644
--- a/src/3rdparty/angle/src/compiler/translator/glslang.y
+++ b/src/3rdparty/angle/src/compiler/translator/glslang.y
@@ -1,6 +1,6 @@
 /*
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -15,7 +15,7 @@ WHICH GENERATES THE GLSL ES PARSER (glslang_tab.cpp AND glslang_tab.h).
 
 %{
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -34,6 +34,7 @@ WHICH GENERATES THE GLSL ES PARSER (glslang_tab.cpp AND glslang_tab.h).
 #pragma warning(disable: 4701)
 #endif
 
+#include "angle_gl.h"
 #include "compiler/translator/SymbolTable.h"
 #include "compiler/translator/ParseContext.h"
 #include "GLSLANG/ShaderLang.h"
@@ -41,8 +42,8 @@ WHICH GENERATES THE GLSL ES PARSER (glslang_tab.cpp AND glslang_tab.h).
 #define YYENABLE_NLS 0
 
 #define YYLEX_PARAM context->scanner
-%}
 
+%}
 %expect 1 /* One shift reduce conflict because of if | else */
 %pure-parser
 %parse-param {TParseContext* context}
@@ -51,7 +52,6 @@ WHICH GENERATES THE GLSL ES PARSER (glslang_tab.cpp AND glslang_tab.h).
 %code requires {
 #define YYLTYPE TSourceLoc
 #define YYLTYPE_IS_DECLARED 1
-#define SH_MAX_TOKEN_LENGTH 256  // WebGL spec.
 }
 
 %union {
@@ -60,6 +60,7 @@ WHICH GENERATES THE GLSL ES PARSER (glslang_tab.cpp AND glslang_tab.h).
             TString *string;
             float f;
             int i;
+            unsigned int u;
             bool b;
         };
         TSymbol* symbol;
@@ -75,6 +76,7 @@ WHICH GENERATES THE GLSL ES PARSER (glslang_tab.cpp AND glslang_tab.h).
         union {
             TPublicType type;
             TPrecision precision;
+            TLayoutQualifier layoutQualifier;
             TQualifier qualifier;
             TFunction* function;
             TParameter param;
@@ -105,29 +107,50 @@ extern void yyerror(YYLTYPE* yylloc, TParseContext* context, const char* reason)
   } while (0)
 
 #define VERTEX_ONLY(S, L) {  \
-    if (context->shaderType != SH_VERTEX_SHADER) {  \
+    if (context->shaderType != GL_VERTEX_SHADER) {  \
         context->error(L, " supported in vertex shaders only ", S);  \
         context->recover();  \
     }  \
 }
 
 #define FRAG_ONLY(S, L) {  \
-    if (context->shaderType != SH_FRAGMENT_SHADER) {  \
+    if (context->shaderType != GL_FRAGMENT_SHADER) {  \
         context->error(L, " supported in fragment shaders only ", S);  \
         context->recover();  \
     }  \
 }
+
+#define ES2_ONLY(S, L) {  \
+    if (context->shaderVersion != 100) {  \
+        context->error(L, " supported in GLSL ES 1.00 only ", S);  \
+        context->recover();  \
+    }  \
+}
+
+#define ES3_ONLY(TOKEN, LINE, REASON) {  \
+    if (context->shaderVersion != 300) {  \
+        context->error(LINE, REASON " supported in GLSL ES 3.00 only ", TOKEN);  \
+        context->recover();  \
+    }  \
+}
 %}
 
 %token <lex> INVARIANT HIGH_PRECISION MEDIUM_PRECISION LOW_PRECISION PRECISION
-%token <lex> ATTRIBUTE CONST_QUAL BOOL_TYPE FLOAT_TYPE INT_TYPE
-%token <lex> BREAK CONTINUE DO ELSE FOR IF DISCARD RETURN
-%token <lex> BVEC2 BVEC3 BVEC4 IVEC2 IVEC3 IVEC4 VEC2 VEC3 VEC4
+%token <lex> ATTRIBUTE CONST_QUAL BOOL_TYPE FLOAT_TYPE INT_TYPE UINT_TYPE
+%token <lex> BREAK CONTINUE DO ELSE FOR IF DISCARD RETURN SWITCH CASE DEFAULT
+%token <lex> BVEC2 BVEC3 BVEC4 IVEC2 IVEC3 IVEC4 VEC2 VEC3 VEC4 UVEC2 UVEC3 UVEC4
 %token <lex> MATRIX2 MATRIX3 MATRIX4 IN_QUAL OUT_QUAL INOUT_QUAL UNIFORM VARYING
+%token <lex> MATRIX2x3 MATRIX3x2 MATRIX2x4 MATRIX4x2 MATRIX3x4 MATRIX4x3
+%token <lex> CENTROID FLAT SMOOTH
 %token <lex> STRUCT VOID_TYPE WHILE
-%token <lex> SAMPLER2D SAMPLERCUBE SAMPLER_EXTERNAL_OES SAMPLER2DRECT
-
-%token <lex> IDENTIFIER TYPE_NAME FLOATCONSTANT INTCONSTANT BOOLCONSTANT
+%token <lex> SAMPLER2D SAMPLERCUBE SAMPLER_EXTERNAL_OES SAMPLER2DRECT SAMPLER2DARRAY
+%token <lex> ISAMPLER2D ISAMPLER3D ISAMPLERCUBE ISAMPLER2DARRAY
+%token <lex> USAMPLER2D USAMPLER3D USAMPLERCUBE USAMPLER2DARRAY
+%token <lex> SAMPLER3D SAMPLER3DRECT SAMPLER2DSHADOW SAMPLERCUBESHADOW SAMPLER2DARRAYSHADOW
+%token <lex> LAYOUT
+
+%token <lex> IDENTIFIER TYPE_NAME FLOATCONSTANT INTCONSTANT UINTCONSTANT BOOLCONSTANT
+%token <lex> FIELD_SELECTION
 %token <lex> LEFT_OP RIGHT_OP
 %token <lex> INC_OP DEC_OP LE_OP GE_OP EQ_OP NE_OP
 %token <lex> AND_OP OR_OP XOR_OP MUL_ASSIGN DIV_ASSIGN ADD_ASSIGN
@@ -160,10 +183,11 @@ extern void yyerror(YYLTYPE* yylloc, TParseContext* context, const char* reason)
 %type <interm> single_declaration init_declarator_list
 
 %type <interm> parameter_declaration parameter_declarator parameter_type_specifier
-%type <interm.qualifier> parameter_qualifier
+%type <interm.qualifier> parameter_qualifier parameter_type_qualifier 
+%type <interm.layoutQualifier> layout_qualifier layout_qualifier_id_list layout_qualifier_id
 
 %type <interm.precision> precision_qualifier
-%type <interm.type> type_qualifier fully_specified_type type_specifier
+%type <interm.type> type_qualifier fully_specified_type type_specifier storage_qualifier interpolation_qualifier
 %type <interm.type> type_specifier_no_prec type_specifier_nonarray
 %type <interm.type> struct_specifier
 %type <interm.field> struct_declarator
@@ -173,6 +197,8 @@ extern void yyerror(YYLTYPE* yylloc, TParseContext* context, const char* reason)
 %type <interm> function_call_header_with_parameters function_call_header_no_parameters function_call_generic function_prototype
 %type <interm> function_call_or_method
 
+%type <lex> enter_struct
+
 %start translation_unit
 %%
 
@@ -183,38 +209,7 @@ identifier
 variable_identifier
     : IDENTIFIER {
         // The symbol table search was done in the lexical phase
-        const TSymbol *symbol = $1.symbol;
-        const TVariable *variable = 0;
-
-        if (!symbol)
-        {
-            context->error(@1, "undeclared identifier", $1.string->c_str());
-            context->recover();
-        }
-        else if (!symbol->isVariable())
-        {
-            context->error(@1, "variable expected", $1.string->c_str());
-            context->recover();
-        }
-        else
-        {
-            variable = static_cast<const TVariable*>(symbol);
-
-            if (context->symbolTable.findBuiltIn(variable->getName()) &&
-                !variable->getExtension().empty() &&
-                context->extensionErrorCheck(@1, variable->getExtension()))
-            {
-                context->recover();
-            }
-        }
-
-        if (!variable)
-        {
-            TType type(EbtFloat, EbpUndefined);
-            TVariable *fakeVariable = new TVariable($1.string, type);
-            context->symbolTable.insert(*fakeVariable);
-            variable = fakeVariable;
-        }
+        const TVariable *variable = context->getNamedVariable(@1, $1.string, $1.symbol);
 
         if (variable->getType().getQualifier() == EvqConst)
         {
@@ -244,6 +239,11 @@ primary_expression
         unionArray->setIConst($1.i);
         $$ = context->intermediate.addConstantUnion(unionArray, TType(EbtInt, EbpUndefined, EvqConst), @1);
     }
+    | UINTCONSTANT {
+        ConstantUnion *unionArray = new ConstantUnion[1];
+        unionArray->setUConst($1.u);
+        $$ = context->intermediate.addConstantUnion(unionArray, TType(EbtUInt, EbpUndefined, EvqConst), @1);
+    }
     | FLOATCONSTANT {
         ConstantUnion *unionArray = new ConstantUnion[1];
         unionArray->setFConst($1.f);
@@ -270,104 +270,12 @@ postfix_expression
         $$ = $1;
     }
     | postfix_expression DOT identifier {
-        if ($1->isArray()) {
-            context->error(@3, "cannot apply dot operator to an array", ".");
-            context->recover();
-        }
-
-        if ($1->isVector()) {
-            TVectorFields fields;
-            if (! context->parseVectorFields(*$3.string, $1->getNominalSize(), fields, @3)) {
-                fields.num = 1;
-                fields.offsets[0] = 0;
-                context->recover();
-            }
-
-            if ($1->getType().getQualifier() == EvqConst) { // constant folding for vector fields
-                $$ = context->addConstVectorNode(fields, $1, @3);
-                if ($$ == 0) {
-                    context->recover();
-                    $$ = $1;
-                }
-                else
-                    $$->setType(TType($1->getBasicType(), $1->getPrecision(), EvqConst, (int) (*$3.string).size()));
-            } else {
-                TString vectorString = *$3.string;
-                TIntermTyped* index = context->intermediate.addSwizzle(fields, @3);
-                $$ = context->intermediate.addIndex(EOpVectorSwizzle, $1, index, @2);
-                $$->setType(TType($1->getBasicType(), $1->getPrecision(), EvqTemporary, (int) vectorString.size()));
-            }
-        } else if ($1->isMatrix()) {
-            TMatrixFields fields;
-            if (! context->parseMatrixFields(*$3.string, $1->getNominalSize(), fields, @3)) {
-                fields.wholeRow = false;
-                fields.wholeCol = false;
-                fields.row = 0;
-                fields.col = 0;
-                context->recover();
-            }
-
-            if (fields.wholeRow || fields.wholeCol) {
-                context->error(@2, " non-scalar fields not implemented yet", ".");
-                context->recover();
-                ConstantUnion *unionArray = new ConstantUnion[1];
-                unionArray->setIConst(0);
-                TIntermTyped* index = context->intermediate.addConstantUnion(unionArray, TType(EbtInt, EbpUndefined, EvqConst), @3);
-                $$ = context->intermediate.addIndex(EOpIndexDirect, $1, index, @2);
-                $$->setType(TType($1->getBasicType(), $1->getPrecision(),EvqTemporary, $1->getNominalSize()));
-            } else {
-                ConstantUnion *unionArray = new ConstantUnion[1];
-                unionArray->setIConst(fields.col * $1->getNominalSize() + fields.row);
-                TIntermTyped* index = context->intermediate.addConstantUnion(unionArray, TType(EbtInt, EbpUndefined, EvqConst), @3);
-                $$ = context->intermediate.addIndex(EOpIndexDirect, $1, index, @2);
-                $$->setType(TType($1->getBasicType(), $1->getPrecision()));
-            }
-        } else if ($1->getBasicType() == EbtStruct) {
-            bool fieldFound = false;
-            const TFieldList& fields = $1->getType().getStruct()->fields();
-            unsigned int i;
-            for (i = 0; i < fields.size(); ++i) {
-                if (fields[i]->name() == *$3.string) {
-                    fieldFound = true;
-                    break;
-                }
-            }
-            if (fieldFound) {
-                if ($1->getType().getQualifier() == EvqConst) {
-                    $$ = context->addConstStruct(*$3.string, $1, @2);
-                    if ($$ == 0) {
-                        context->recover();
-                        $$ = $1;
-                    }
-                    else {
-                        $$->setType(*fields[i]->type());
-                        // change the qualifier of the return type, not of the structure field
-                        // as the structure definition is shared between various structures.
-                        $$->getTypePointer()->setQualifier(EvqConst);
-                    }
-                } else {
-                    ConstantUnion *unionArray = new ConstantUnion[1];
-                    unionArray->setIConst(i);
-                    TIntermTyped* index = context->intermediate.addConstantUnion(unionArray, *fields[i]->type(), @3);
-                    $$ = context->intermediate.addIndex(EOpIndexDirectStruct, $1, index, @2);
-                    $$->setType(*fields[i]->type());
-                }
-            } else {
-                context->error(@2, " no such field in structure", $3.string->c_str());
-                context->recover();
-                $$ = $1;
-            }
-        } else {
-            context->error(@2, " field selection requires structure, vector, or matrix on left hand side", $3.string->c_str());
-            context->recover();
-            $$ = $1;
-        }
-        // don't delete $3.string, it's from the pool
+        $$ = context->addFieldSelectionExpression($1, @2, *$3.string, @3);
     }
     | postfix_expression INC_OP {
         if (context->lValueErrorCheck(@2, "++", $1))
             context->recover();
-        $$ = context->intermediate.addUnaryMath(EOpPostIncrement, $1, @2, context->symbolTable);
+        $$ = context->intermediate.addUnaryMath(EOpPostIncrement, $1, @2);
         if ($$ == 0) {
             context->unaryOpError(@2, "++", $1->getCompleteString());
             context->recover();
@@ -377,7 +285,7 @@ postfix_expression
     | postfix_expression DEC_OP {
         if (context->lValueErrorCheck(@2, "--", $1))
             context->recover();
-        $$ = context->intermediate.addUnaryMath(EOpPostDecrement, $1, @2, context->symbolTable);
+        $$ = context->intermediate.addUnaryMath(EOpPostDecrement, $1, @2);
         if ($$ == 0) {
             context->unaryOpError(@2, "--", $1->getCompleteString());
             context->recover();
@@ -427,7 +335,7 @@ function_call
             //
             const TFunction* fnCandidate;
             bool builtIn;
-            fnCandidate = context->findFunction(@1, fnCall, &builtIn);
+            fnCandidate = context->findFunction(@1, fnCall, context->shaderVersion, &builtIn);
             if (fnCandidate) {
                 //
                 // A declared function.
@@ -445,7 +353,7 @@ function_call
                         //
                         // Treat it like a built-in unary operator.
                         //
-                        $$ = context->intermediate.addUnaryMath(op, $1.intermNode, @1, context->symbolTable);
+                        $$ = context->intermediate.addUnaryMath(op, $1.intermNode, @1);
                         if ($$ == 0)  {
                             std::stringstream extraInfoStream;
                             extraInfoStream << "built in unary operator function.  Type: " << static_cast<TIntermTyped*>($1.intermNode)->getCompleteString();
@@ -473,7 +381,7 @@ function_call
                     for (size_t i = 0; i < fnCandidate->getParamCount(); ++i) {
                         qual = fnCandidate->getParam(i).type->getQualifier();
                         if (qual == EvqOut || qual == EvqInOut) {
-                            if (context->lValueErrorCheck($$->getLine(), "assign", $$->getAsAggregate()->getSequence()[i]->getAsTyped())) {
+                            if (context->lValueErrorCheck($$->getLine(), "assign", (*($$->getAsAggregate()->getSequence()))[i]->getAsTyped())) {
                                 context->error($1.intermNode->getLine(), "Constant value cannot be passed for 'out' or 'inout' parameters.", "Error");
                                 context->recover();
                             }
@@ -550,59 +458,7 @@ function_call_header
 
 function_identifier
     : type_specifier_nonarray {
-        //
-        // Constructor
-        //
-        TOperator op = EOpNull;
-        if ($1.userDef) {
-            op = EOpConstructStruct;
-        } else {
-            switch ($1.type) {
-            case EbtFloat:
-                if ($1.matrix) {
-                    switch($1.size) {
-                    case 2: op = EOpConstructMat2;  break;
-                    case 3: op = EOpConstructMat3;  break;
-                    case 4: op = EOpConstructMat4;  break;
-                    }
-                } else {
-                    switch($1.size) {
-                    case 1: op = EOpConstructFloat; break;
-                    case 2: op = EOpConstructVec2;  break;
-                    case 3: op = EOpConstructVec3;  break;
-                    case 4: op = EOpConstructVec4;  break;
-                    }
-                }
-                break;
-            case EbtInt:
-                switch($1.size) {
-                case 1: op = EOpConstructInt;   break;
-                case 2: op = EOpConstructIVec2; break;
-                case 3: op = EOpConstructIVec3; break;
-                case 4: op = EOpConstructIVec4; break;
-                }
-                break;
-            case EbtBool:
-                switch($1.size) {
-                case 1: op = EOpConstructBool;  break;
-                case 2: op = EOpConstructBVec2; break;
-                case 3: op = EOpConstructBVec3; break;
-                case 4: op = EOpConstructBVec4; break;
-                }
-                break;
-            default: break;
-            }
-            if (op == EOpNull) {
-                context->error(@1, "cannot construct this type", getBasicString($1.type));
-                context->recover();
-                $1.type = EbtFloat;
-                op = EOpConstructFloat;
-            }
-        }
-        TString tempString;
-        TType type($1);
-        TFunction *function = new TFunction(&tempString, type, op);
-        $$ = function;
+        $$ = context->addConstructorFunc($1);
     }
     | IDENTIFIER {
         if (context->reservedErrorCheck(@1, *$1.string))
@@ -620,7 +476,7 @@ unary_expression
     | INC_OP unary_expression {
         if (context->lValueErrorCheck(@1, "++", $2))
             context->recover();
-        $$ = context->intermediate.addUnaryMath(EOpPreIncrement, $2, @1, context->symbolTable);
+        $$ = context->intermediate.addUnaryMath(EOpPreIncrement, $2, @1);
         if ($$ == 0) {
             context->unaryOpError(@1, "++", $2->getCompleteString());
             context->recover();
@@ -630,7 +486,7 @@ unary_expression
     | DEC_OP unary_expression {
         if (context->lValueErrorCheck(@1, "--", $2))
             context->recover();
-        $$ = context->intermediate.addUnaryMath(EOpPreDecrement, $2, @1, context->symbolTable);
+        $$ = context->intermediate.addUnaryMath(EOpPreDecrement, $2, @1);
         if ($$ == 0) {
             context->unaryOpError(@1, "--", $2->getCompleteString());
             context->recover();
@@ -639,7 +495,7 @@ unary_expression
     }
     | unary_operator unary_expression {
         if ($1.op != EOpNull) {
-            $$ = context->intermediate.addUnaryMath($1.op, $2, @1, context->symbolTable);
+            $$ = context->intermediate.addUnaryMath($1.op, $2, @1);
             if ($$ == 0) {
                 const char* errorOp = "";
                 switch($1.op) {
@@ -667,7 +523,7 @@ unary_operator
 multiplicative_expression
     : unary_expression { $$ = $1; }
     | multiplicative_expression STAR unary_expression {
-        $$ = context->intermediate.addBinaryMath(EOpMul, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpMul, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "*", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -675,7 +531,7 @@ multiplicative_expression
         }
     }
     | multiplicative_expression SLASH unary_expression {
-        $$ = context->intermediate.addBinaryMath(EOpDiv, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpDiv, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "/", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -687,7 +543,7 @@ multiplicative_expression
 additive_expression
     : multiplicative_expression { $$ = $1; }
     | additive_expression PLUS multiplicative_expression {
-        $$ = context->intermediate.addBinaryMath(EOpAdd, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpAdd, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "+", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -695,7 +551,7 @@ additive_expression
         }
     }
     | additive_expression DASH multiplicative_expression {
-        $$ = context->intermediate.addBinaryMath(EOpSub, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpSub, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "-", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -711,7 +567,7 @@ shift_expression
 relational_expression
     : shift_expression { $$ = $1; }
     | relational_expression LEFT_ANGLE shift_expression {
-        $$ = context->intermediate.addBinaryMath(EOpLessThan, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpLessThan, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "<", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -721,7 +577,7 @@ relational_expression
         }
     }
     | relational_expression RIGHT_ANGLE shift_expression  {
-        $$ = context->intermediate.addBinaryMath(EOpGreaterThan, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpGreaterThan, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, ">", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -731,7 +587,7 @@ relational_expression
         }
     }
     | relational_expression LE_OP shift_expression  {
-        $$ = context->intermediate.addBinaryMath(EOpLessThanEqual, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpLessThanEqual, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "<=", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -741,7 +597,7 @@ relational_expression
         }
     }
     | relational_expression GE_OP shift_expression  {
-        $$ = context->intermediate.addBinaryMath(EOpGreaterThanEqual, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpGreaterThanEqual, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, ">=", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -755,7 +611,7 @@ relational_expression
 equality_expression
     : relational_expression { $$ = $1; }
     | equality_expression EQ_OP relational_expression  {
-        $$ = context->intermediate.addBinaryMath(EOpEqual, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpEqual, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "==", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -765,7 +621,7 @@ equality_expression
         }
     }
     | equality_expression NE_OP relational_expression {
-        $$ = context->intermediate.addBinaryMath(EOpNotEqual, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpNotEqual, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "!=", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -791,7 +647,7 @@ inclusive_or_expression
 logical_and_expression
     : inclusive_or_expression { $$ = $1; }
     | logical_and_expression AND_OP inclusive_or_expression {
-        $$ = context->intermediate.addBinaryMath(EOpLogicalAnd, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpLogicalAnd, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "&&", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -805,7 +661,7 @@ logical_and_expression
 logical_xor_expression
     : logical_and_expression { $$ = $1; }
     | logical_xor_expression XOR_OP logical_and_expression  {
-        $$ = context->intermediate.addBinaryMath(EOpLogicalXor, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpLogicalXor, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "^^", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -819,7 +675,7 @@ logical_xor_expression
 logical_or_expression
     : logical_xor_expression { $$ = $1; }
     | logical_or_expression OR_OP logical_xor_expression  {
-        $$ = context->intermediate.addBinaryMath(EOpLogicalOr, $1, $3, @2, context->symbolTable);
+        $$ = context->intermediate.addBinaryMath(EOpLogicalOr, $1, $3, @2);
         if ($$ == 0) {
             context->binaryOpError(@2, "||", $1->getCompleteString(), $3->getCompleteString());
             context->recover();
@@ -892,6 +748,14 @@ constant_expression
     }
     ;
 
+enter_struct
+    : IDENTIFIER LEFT_BRACE {
+        if (context->enterStructDeclaration(@1, *$1.string))
+            context->recover();
+        $$ = $1;
+    }
+    ;
+
 declaration
     : function_prototype SEMICOLON   {
         TFunction &function = *($1.function);
@@ -921,12 +785,13 @@ declaration
         context->symbolTable.pop();
     }
     | init_declarator_list SEMICOLON {
-        if ($1.intermAggregate)
-            $1.intermAggregate->setOp(EOpDeclaration);
-        $$ = $1.intermAggregate;
+        TIntermAggregate *aggNode = $1.intermAggregate;
+        if (aggNode && aggNode->getOp() == EOpNull)
+            aggNode->setOp(EOpDeclaration);
+        $$ = aggNode;
     }
     | PRECISION precision_qualifier type_specifier_no_prec SEMICOLON {
-        if (($2 == EbpHigh) && (context->shaderType == SH_FRAGMENT_SHADER) && !context->fragmentPrecisionHigh) {
+        if (($2 == EbpHigh) && (context->shaderType == GL_FRAGMENT_SHADER) && !context->fragmentPrecisionHigh) {
             context->error(@1, "precision is not supported in fragment shader", "highp");
             context->recover();
         }
@@ -936,6 +801,22 @@ declaration
         }
         $$ = 0;
     }
+    | type_qualifier enter_struct struct_declaration_list RIGHT_BRACE SEMICOLON {
+        ES3_ONLY(getQualifierString($1.qualifier), @1, "interface blocks");
+        $$ = context->addInterfaceBlock($1, @2, *$2.string, $3, NULL, @$, NULL, @$);
+    }
+    | type_qualifier enter_struct struct_declaration_list RIGHT_BRACE IDENTIFIER SEMICOLON {
+        ES3_ONLY(getQualifierString($1.qualifier), @1, "interface blocks");
+        $$ = context->addInterfaceBlock($1, @2, *$2.string, $3, $5.string, @5, NULL, @$);
+    }
+    | type_qualifier enter_struct struct_declaration_list RIGHT_BRACE IDENTIFIER LEFT_BRACKET constant_expression RIGHT_BRACKET SEMICOLON {
+        ES3_ONLY(getQualifierString($1.qualifier), @1, "interface blocks");
+        $$ = context->addInterfaceBlock($1, @2, *$2.string, $3, $5.string, @5, $7, @6);
+    }
+    | type_qualifier SEMICOLON {
+        context->parseGlobalLayoutQualifier($1);
+        $$ = 0;
+    }
     ;
 
 function_prototype
@@ -948,7 +829,7 @@ function_prototype
         //
         // Redeclarations are allowed.  But, return types and parameter qualifiers must match.
         //
-        TFunction* prevDec = static_cast<TFunction*>(context->symbolTable.find($1->getMangledName()));
+        TFunction* prevDec = static_cast<TFunction*>(context->symbolTable.find($1->getMangledName(), context->shaderVersion));
         if (prevDec) {
             if (prevDec->getReturnType() != $1->getReturnType()) {
                 context->error(@2, "overloaded functions must have the same return type", $1->getReturnType().getBasicString());
@@ -965,7 +846,7 @@ function_prototype
         //
         // Check for previously declared variables using the same name.
         //
-        TSymbol *prevSym = context->symbolTable.find($1->getName());
+        TSymbol *prevSym = context->symbolTable.find($1->getName(), context->shaderVersion);
         if (prevSym)
         {
             if (!prevSym->isFunction())
@@ -977,7 +858,8 @@ function_prototype
         else
         {
             // Insert the unmangled name to detect potential future redefinition as a variable.
-            context->symbolTable.getOuterLevel()->insert($1->getName(), *$1);
+            TFunction *function = new TFunction(NewPoolTString($1->getName().c_str()), $1->getReturnType());
+            context->symbolTable.getOuterLevel()->insert(function);
         }
 
         //
@@ -989,7 +871,7 @@ function_prototype
 
         // We're at the inner scope level of the function's arguments and body statement.
         // Add the function prototype to the surrounding scope instead.
-        context->symbolTable.getOuterLevel()->insert(*$$.function);
+        context->symbolTable.getOuterLevel()->insert($$.function);
     }
     ;
 
@@ -1092,9 +974,9 @@ parameter_declaration
     //
     // Type + name
     //
-    : type_qualifier parameter_qualifier parameter_declarator {
+    : parameter_type_qualifier parameter_qualifier parameter_declarator {
         $$ = $3;
-        if (context->paramErrorCheck(@3, $1.qualifier, $2, $$.param.type))
+        if (context->paramErrorCheck(@3, $1, $2, $$.param.type))
             context->recover();
     }
     | parameter_qualifier parameter_declarator {
@@ -1107,9 +989,9 @@ parameter_declaration
     //
     // Only type
     //
-    | type_qualifier parameter_qualifier parameter_type_specifier {
+    | parameter_type_qualifier parameter_qualifier parameter_type_specifier {
         $$ = $3;
-        if (context->paramErrorCheck(@3, $1.qualifier, $2, $$.param.type))
+        if (context->paramErrorCheck(@3, $1, $2, $$.param.type))
             context->recover();
     }
     | parameter_qualifier parameter_type_specifier {
@@ -1148,191 +1030,50 @@ init_declarator_list
         $$ = $1;
     }
     | init_declarator_list COMMA identifier {
-        if ($1.type.type == EbtInvariant && !$3.symbol)
-        {
-            context->error(@3, "undeclared identifier declared as invariant", $3.string->c_str());
-            context->recover();
-        }
-
-        TIntermSymbol* symbol = context->intermediate.addSymbol(0, *$3.string, TType($1.type), @3);
-        $$.intermAggregate = context->intermediate.growAggregate($1.intermNode, symbol, @3);
-        
-        if (context->structQualifierErrorCheck(@3, $$.type))
-            context->recover();
-
-        if (context->nonInitConstErrorCheck(@3, *$3.string, $$.type, false))
-            context->recover();
-
-        TVariable* variable = 0;
-        if (context->nonInitErrorCheck(@3, *$3.string, $$.type, variable))
-            context->recover();
-        if (symbol && variable)
-            symbol->setId(variable->getUniqueId());
+        $$ = $1;
+        $$.intermAggregate = context->parseDeclarator($$.type, $1.intermAggregate, $3.symbol, @3, *$3.string);
     }
     | init_declarator_list COMMA identifier LEFT_BRACKET RIGHT_BRACKET {
-        if (context->structQualifierErrorCheck(@3, $1.type))
-            context->recover();
-
-        if (context->nonInitConstErrorCheck(@3, *$3.string, $1.type, true))
-            context->recover();
-
         $$ = $1;
-
-        if (context->arrayTypeErrorCheck(@4, $1.type) || context->arrayQualifierErrorCheck(@4, $1.type))
-            context->recover();
-        else {
-            $1.type.setArray(true);
-            TVariable* variable;
-            if (context->arrayErrorCheck(@4, *$3.string, $1.type, variable))
-                context->recover();
-        }
+        context->parseArrayDeclarator($$.type, @3, *$3.string, @4, NULL, NULL);
     }
     | init_declarator_list COMMA identifier LEFT_BRACKET constant_expression RIGHT_BRACKET {
-        if (context->structQualifierErrorCheck(@3, $1.type))
-            context->recover();
-
-        if (context->nonInitConstErrorCheck(@3, *$3.string, $1.type, true))
-            context->recover();
-
         $$ = $1;
-
-        if (context->arrayTypeErrorCheck(@4, $1.type) || context->arrayQualifierErrorCheck(@4, $1.type))
-            context->recover();
-        else {
-            int size;
-            if (context->arraySizeErrorCheck(@4, $5, size))
-                context->recover();
-            $1.type.setArray(true, size);
-            TVariable* variable = 0;
-            if (context->arrayErrorCheck(@4, *$3.string, $1.type, variable))
-                context->recover();
-            TType type = TType($1.type);
-            type.setArraySize(size);
-            $$.intermAggregate = context->intermediate.growAggregate($1.intermNode, context->intermediate.addSymbol(variable ? variable->getUniqueId() : 0, *$3.string, type, @3), @3);
-        }
+        $$.intermAggregate = context->parseArrayDeclarator($$.type, @3, *$3.string, @4, $1.intermNode, $5);
     }
     | init_declarator_list COMMA identifier EQUAL initializer {
-        if (context->structQualifierErrorCheck(@3, $1.type))
-            context->recover();
-
         $$ = $1;
-
-        TIntermNode* intermNode;
-        if (!context->executeInitializer(@3, *$3.string, $1.type, $5, intermNode)) {
-            //
-            // build the intermediate representation
-            //
-            if (intermNode)
-        $$.intermAggregate = context->intermediate.growAggregate($1.intermNode, intermNode, @4);
-            else
-                $$.intermAggregate = $1.intermAggregate;
-        } else {
-            context->recover();
-            $$.intermAggregate = 0;
-        }
+        $$.intermAggregate = context->parseInitDeclarator($$.type, $1.intermAggregate, @3, *$3.string, @4, $5);
     }
     ;
 
 single_declaration
     : fully_specified_type {
         $$.type = $1;
-        $$.intermAggregate = context->intermediate.makeAggregate(context->intermediate.addSymbol(0, "", TType($1), @1), @1);
+        $$.intermAggregate = context->parseSingleDeclaration($$.type, @1, "");
     }
     | fully_specified_type identifier {
-        TIntermSymbol* symbol = context->intermediate.addSymbol(0, *$2.string, TType($1), @2);
-        $$.intermAggregate = context->intermediate.makeAggregate(symbol, @2);
-        
-        if (context->structQualifierErrorCheck(@2, $$.type))
-            context->recover();
-
-        if (context->nonInitConstErrorCheck(@2, *$2.string, $$.type, false))
-            context->recover();
-            
-            $$.type = $1;
-
-        TVariable* variable = 0;
-        if (context->nonInitErrorCheck(@2, *$2.string, $$.type, variable))
-            context->recover();
-        if (variable && symbol)
-            symbol->setId(variable->getUniqueId());
+        $$.type = $1;
+        $$.intermAggregate = context->parseSingleDeclaration($$.type, @2, *$2.string);
     }
     | fully_specified_type identifier LEFT_BRACKET RIGHT_BRACKET {
         context->error(@2, "unsized array declarations not supported", $2.string->c_str());
         context->recover();
 
-        TIntermSymbol* symbol = context->intermediate.addSymbol(0, *$2.string, TType($1), @2);
-        $$.intermAggregate = context->intermediate.makeAggregate(symbol, @2);
         $$.type = $1;
+        $$.intermAggregate = context->parseSingleDeclaration($$.type, @2, *$2.string);
     }
     | fully_specified_type identifier LEFT_BRACKET constant_expression RIGHT_BRACKET {
-        TType type = TType($1);
-        int size;
-        if (context->arraySizeErrorCheck(@2, $4, size))
-            context->recover();
-        type.setArraySize(size);
-        TIntermSymbol* symbol = context->intermediate.addSymbol(0, *$2.string, type, @2);
-        $$.intermAggregate = context->intermediate.makeAggregate(symbol, @2);
-        
-        if (context->structQualifierErrorCheck(@2, $1))
-            context->recover();
-
-        if (context->nonInitConstErrorCheck(@2, *$2.string, $1, true))
-            context->recover();
-
         $$.type = $1;
-
-        if (context->arrayTypeErrorCheck(@3, $1) || context->arrayQualifierErrorCheck(@3, $1))
-            context->recover();
-        else {
-            int size;
-            if (context->arraySizeErrorCheck(@3, $4, size))
-                context->recover();
-
-            $1.setArray(true, size);
-            TVariable* variable = 0;
-            if (context->arrayErrorCheck(@3, *$2.string, $1, variable))
-                context->recover();
-            if (variable && symbol)
-                symbol->setId(variable->getUniqueId());
-        }
+        $$.intermAggregate = context->parseSingleArrayDeclaration($$.type, @2, *$2.string, @3, $4);
     }
     | fully_specified_type identifier EQUAL initializer {
-        if (context->structQualifierErrorCheck(@2, $1))
-            context->recover();
-
         $$.type = $1;
-
-        TIntermNode* intermNode;
-        if (!context->executeInitializer(@2, *$2.string, $1, $4, intermNode)) {
-        //
-        // Build intermediate representation
-        //
-            if(intermNode)
-                $$.intermAggregate = context->intermediate.makeAggregate(intermNode, @3);
-            else
-                $$.intermAggregate = 0;
-        } else {
-            context->recover();
-            $$.intermAggregate = 0;
-        }
+        $$.intermAggregate = context->parseSingleInitDeclaration($$.type, @2, *$2.string, @3, $4);
     }
     | INVARIANT IDENTIFIER {
-        VERTEX_ONLY("invariant declaration", @1);
-        if (context->globalErrorCheck(@1, context->symbolTable.atGlobalLevel(), "invariant varying"))
-            context->recover();
-        $$.type.setBasic(EbtInvariant, EvqInvariantVaryingOut, @2);
-        if (!$2.symbol)
-        {
-            context->error(@2, "undeclared identifier declared as invariant", $2.string->c_str());
-            context->recover();
-            
-            $$.intermAggregate = 0;
-        }
-        else
-        {
-            TIntermSymbol *symbol = context->intermediate.addSymbol(0, *$2.string, TType($$.type), @2);
-            $$.intermAggregate = context->intermediate.makeAggregate(symbol, @2);
-        }
+        // $$.type is not used in invariant declarations.
+        $$.intermAggregate = context->parseInvariantDeclaration(@1, @2, $2.string, $2.symbol);
     }
     ;
 
@@ -1347,57 +1088,113 @@ fully_specified_type
         }
     }
     | type_qualifier type_specifier  {
-        if ($2.array) {
-            context->error(@2, "not supported", "first-class array");
-            context->recover();
-            $2.setArray(false);
-        }
+        $$ = context->addFullySpecifiedType($1.qualifier, $1.layoutQualifier, $2);
+    }
+    ;
 
-        if ($1.qualifier == EvqAttribute &&
-            ($2.type == EbtBool || $2.type == EbtInt)) {
-            context->error(@2, "cannot be bool or int", getQualifierString($1.qualifier));
-            context->recover();
-        }
-        if (($1.qualifier == EvqVaryingIn || $1.qualifier == EvqVaryingOut) &&
-            ($2.type == EbtBool || $2.type == EbtInt)) {
-            context->error(@2, "cannot be bool or int", getQualifierString($1.qualifier));
-            context->recover();
-        }
-        $$ = $2;
-        $$.qualifier = $1.qualifier;
+interpolation_qualifier
+    : SMOOTH {
+        $$.qualifier = EvqSmooth;
+    }
+    | FLAT {
+        $$.qualifier = EvqFlat;
     }
     ;
 
-type_qualifier
+parameter_type_qualifier
     : CONST_QUAL {
-        $$.setBasic(EbtVoid, EvqConst, @1);
+        $$ = EvqConst;
     }
-    | ATTRIBUTE {
+    ;
+
+type_qualifier
+    : ATTRIBUTE {
         VERTEX_ONLY("attribute", @1);
+        ES2_ONLY("attribute", @1);
         if (context->globalErrorCheck(@1, context->symbolTable.atGlobalLevel(), "attribute"))
             context->recover();
         $$.setBasic(EbtVoid, EvqAttribute, @1);
     }
     | VARYING {
+        ES2_ONLY("varying", @1);
         if (context->globalErrorCheck(@1, context->symbolTable.atGlobalLevel(), "varying"))
             context->recover();
-        if (context->shaderType == SH_VERTEX_SHADER)
+        if (context->shaderType == GL_VERTEX_SHADER)
             $$.setBasic(EbtVoid, EvqVaryingOut, @1);
         else
             $$.setBasic(EbtVoid, EvqVaryingIn, @1);
     }
     | INVARIANT VARYING {
+        ES2_ONLY("varying", @1);
         if (context->globalErrorCheck(@1, context->symbolTable.atGlobalLevel(), "invariant varying"))
             context->recover();
-        if (context->shaderType == SH_VERTEX_SHADER)
+        if (context->shaderType == GL_VERTEX_SHADER)
             $$.setBasic(EbtVoid, EvqInvariantVaryingOut, @1);
         else
             $$.setBasic(EbtVoid, EvqInvariantVaryingIn, @1);
     }
+    | storage_qualifier {
+        if ($1.qualifier != EvqConst && !context->symbolTable.atGlobalLevel()) {
+            context->error(@1, "Local variables can only use the const storage qualifier.", getQualifierString($1.qualifier));
+            context->recover();
+        } else {
+            $$.setBasic(EbtVoid, $1.qualifier, @1);
+        }
+    }
+    | interpolation_qualifier storage_qualifier {
+        $$ = context->joinInterpolationQualifiers(@1, $1.qualifier, @2, $2.qualifier);
+    }
+    | interpolation_qualifier {
+        context->error(@1, "interpolation qualifier requires a fragment 'in' or vertex 'out' storage qualifier", getInterpolationString($1.qualifier));
+        context->recover();
+        
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtVoid, qual, @1);
+    }
+    | layout_qualifier {
+        $$.qualifier = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.layoutQualifier = $1;
+    }
+    | layout_qualifier storage_qualifier {
+        $$.setBasic(EbtVoid, $2.qualifier, @2);
+        $$.layoutQualifier = $1;
+    }
+    ;
+
+storage_qualifier
+    : CONST_QUAL {
+        $$.qualifier = EvqConst;
+    }
+    | IN_QUAL {
+        ES3_ONLY("in", @1, "storage qualifier");
+        $$.qualifier = (context->shaderType == GL_FRAGMENT_SHADER) ? EvqFragmentIn : EvqVertexIn;
+    }
+    | OUT_QUAL {
+        ES3_ONLY("out", @1, "storage qualifier");
+        $$.qualifier = (context->shaderType == GL_FRAGMENT_SHADER) ? EvqFragmentOut : EvqVertexOut;
+    }
+    | CENTROID IN_QUAL {
+        ES3_ONLY("centroid in", @1, "storage qualifier");
+        if (context->shaderType == GL_VERTEX_SHADER)
+        {
+            context->error(@1, "invalid storage qualifier", "it is an error to use 'centroid in' in the vertex shader");
+            context->recover();
+        }
+        $$.qualifier = (context->shaderType == GL_FRAGMENT_SHADER) ? EvqCentroidIn : EvqVertexIn;
+    }
+    | CENTROID OUT_QUAL {
+        ES3_ONLY("centroid out", @1, "storage qualifier");
+        if (context->shaderType == GL_FRAGMENT_SHADER)
+        {
+            context->error(@1, "invalid storage qualifier", "it is an error to use 'centroid out' in the fragment shader");
+            context->recover();
+        }
+        $$.qualifier = (context->shaderType == GL_FRAGMENT_SHADER) ? EvqFragmentOut : EvqCentroidOut;
+    }
     | UNIFORM {
         if (context->globalErrorCheck(@1, context->symbolTable.atGlobalLevel(), "uniform"))
             context->recover();
-        $$.setBasic(EbtVoid, EvqUniform, @1);
+        $$.qualifier = EvqUniform;
     }
     ;
 
@@ -1415,6 +1212,11 @@ type_specifier
     | precision_qualifier type_specifier_no_prec {
         $$ = $2;
         $$.precision = $1;
+
+        if (!SupportsPrecision($2.type)) {
+            context->error(@1, "illegal type for precision qualifier", getBasicString($2.type));
+            context->recover();
+        }
     }
     ;
 
@@ -1430,6 +1232,34 @@ precision_qualifier
     }
     ;
 
+layout_qualifier
+    : LAYOUT LEFT_PAREN layout_qualifier_id_list RIGHT_PAREN {
+        ES3_ONLY("layout", @1, "qualifier");
+        $$ = $3;
+    }
+    ;
+
+layout_qualifier_id_list
+    : layout_qualifier_id {
+        $$ = $1;
+    }
+    | layout_qualifier_id_list COMMA layout_qualifier_id {
+        $$ = context->joinLayoutQualifiers($1, $3);
+    }
+    ;
+
+layout_qualifier_id
+    : IDENTIFIER {
+        $$ = context->parseLayoutQualifier(*$1.string, @1);
+    }
+    | IDENTIFIER EQUAL INTCONSTANT {
+        $$ = context->parseLayoutQualifier(*$1.string, @1, *$3.string, $3.i, @3);
+    }
+    | IDENTIFIER EQUAL UINTCONSTANT {
+        $$ = context->parseLayoutQualifier(*$1.string, @1, *$3.string, $3.i, @3);
+    }
+    ;
+
 type_specifier_no_prec
     : type_specifier_nonarray {
         $$ = $1;
@@ -1461,6 +1291,10 @@ type_specifier_nonarray
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtInt, qual, @1);
     }
+    | UINT_TYPE {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUInt, qual, @1);
+    }
     | BOOL_TYPE {
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtBool, qual, @1);
@@ -1510,29 +1344,126 @@ type_specifier_nonarray
         $$.setBasic(EbtInt, qual, @1);
         $$.setAggregate(4);
     }
+    | UVEC2 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUInt, qual, @1);
+        $$.setAggregate(2);
+    }
+    | UVEC3 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUInt, qual, @1);
+        $$.setAggregate(3);
+    }
+    | UVEC4 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUInt, qual, @1);
+        $$.setAggregate(4);
+    }
     | MATRIX2 {
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtFloat, qual, @1);
-        $$.setAggregate(2, true);
+        $$.setMatrix(2, 2);
     }
     | MATRIX3 {
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtFloat, qual, @1);
-        $$.setAggregate(3, true);
+        $$.setMatrix(3, 3);
     }
     | MATRIX4 {
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtFloat, qual, @1);
-        $$.setAggregate(4, true);
+        $$.setMatrix(4, 4);
+    }
+    | MATRIX2x3 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtFloat, qual, @1);
+        $$.setMatrix(2, 3);
+    }
+    | MATRIX3x2 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtFloat, qual, @1);
+        $$.setMatrix(3, 2);
+    }
+    | MATRIX2x4 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtFloat, qual, @1);
+        $$.setMatrix(2, 4);
+    }
+    | MATRIX4x2 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtFloat, qual, @1);
+        $$.setMatrix(4, 2);
+    }
+    | MATRIX3x4 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtFloat, qual, @1);
+        $$.setMatrix(3, 4);
+    }
+    | MATRIX4x3 {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtFloat, qual, @1);
+        $$.setMatrix(4, 3);
     }
     | SAMPLER2D {
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtSampler2D, qual, @1);
     }
+    | SAMPLER3D {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtSampler3D, qual, @1);
+    }
     | SAMPLERCUBE {
         TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
         $$.setBasic(EbtSamplerCube, qual, @1);
     }
+    | SAMPLER2DARRAY {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtSampler2DArray, qual, @1);
+    }
+    | ISAMPLER2D {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtISampler2D, qual, @1);
+    }
+    | ISAMPLER3D {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtISampler3D, qual, @1);
+    }
+    | ISAMPLERCUBE {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtISamplerCube, qual, @1);
+    }
+    | ISAMPLER2DARRAY {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtISampler2DArray, qual, @1);
+    }
+    | USAMPLER2D {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUSampler2D, qual, @1);
+    }
+    | USAMPLER3D {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUSampler3D, qual, @1);
+    }
+    | USAMPLERCUBE {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUSamplerCube, qual, @1);
+    }
+    | USAMPLER2DARRAY {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtUSampler2DArray, qual, @1);
+    }
+    | SAMPLER2DSHADOW {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtSampler2DShadow, qual, @1);
+    }
+    | SAMPLERCUBESHADOW {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtSamplerCubeShadow, qual, @1);
+    }
+    | SAMPLER2DARRAYSHADOW {
+        TQualifier qual = context->symbolTable.atGlobalLevel() ? EvqGlobal : EvqTemporary;
+        $$.setBasic(EbtSampler2DArrayShadow, qual, @1);
+    }
     | SAMPLER_EXTERNAL_OES {
         if (!context->supportsExtension("GL_OES_EGL_image_external")) {
             context->error(@1, "unsupported type", "samplerExternalOES");
@@ -1567,24 +1498,10 @@ type_specifier_nonarray
 
 struct_specifier
     : STRUCT identifier LEFT_BRACE { if (context->enterStructDeclaration(@2, *$2.string)) context->recover(); } struct_declaration_list RIGHT_BRACE {
-        if (context->reservedErrorCheck(@2, *$2.string))
-            context->recover();
-
-        TType* structure = new TType(new TStructure($2.string, $5));
-        TVariable* userTypeDef = new TVariable($2.string, *structure, true);
-        if (! context->symbolTable.insert(*userTypeDef)) {
-            context->error(@2, "redefinition", $2.string->c_str(), "struct");
-            context->recover();
-        }
-        $$.setBasic(EbtStruct, EvqTemporary, @1);
-        $$.userDef = structure;
-        context->exitStructDeclaration();
+        $$ = context->addStructure(@1, @2, $2.string, $5);
     }
     | STRUCT LEFT_BRACE { if (context->enterStructDeclaration(@2, *$2.string)) context->recover(); } struct_declaration_list RIGHT_BRACE {
-        TType* structure = new TType(new TStructure(NewPoolTString(""), $4));
-        $$.setBasic(EbtStruct, EvqTemporary, @1);
-        $$.userDef = structure;
-        context->exitStructDeclaration();
+        $$ = context->addStructure(@1, @$, NewPoolTString(""), $4);
     }
     ;
 
@@ -1609,34 +1526,13 @@ struct_declaration_list
 
 struct_declaration
     : type_specifier struct_declarator_list SEMICOLON {
-        $$ = $2;
-
-        if (context->voidErrorCheck(@1, (*$2)[0]->name(), $1)) {
-            context->recover();
-        }
-        for (unsigned int i = 0; i < $$->size(); ++i) {
-            //
-            // Careful not to replace already known aspects of type, like array-ness
-            //
-            TType* type = (*$$)[i]->type();
-            type->setBasicType($1.type);
-            type->setNominalSize($1.size);
-            type->setMatrix($1.matrix);
-            type->setPrecision($1.precision);
-
-            // don't allow arrays of arrays
-            if (type->isArray()) {
-                if (context->arrayTypeErrorCheck(@1, $1))
-                    context->recover();
-            }
-            if ($1.array)
-                type->setArraySize($1.arraySize);
-            if ($1.userDef)
-                type->setStruct($1.userDef->getStruct());
-
-            if (context->structNestingErrorCheck(@1, *(*$$)[i]))
-                context->recover();
-        }
+        $$ = context->addStructDeclaratorList($1, $2);
+    }
+    | type_qualifier type_specifier struct_declarator_list SEMICOLON {
+        // ES3 Only, but errors should be handled elsewhere
+        $2.qualifier = $1.qualifier;
+        $2.layoutQualifier = $1.layoutQualifier;
+        $$ = context->addStructDeclaratorList($2, $3);
     }
     ;
 
@@ -1656,19 +1552,19 @@ struct_declarator
             context->recover();
 
         TType* type = new TType(EbtVoid, EbpUndefined);
-        $$ = new TField(type, $1.string);
+        $$ = new TField(type, $1.string, @1);
     }
     | identifier LEFT_BRACKET constant_expression RIGHT_BRACKET {
         if (context->reservedErrorCheck(@1, *$1.string))
             context->recover();
 
         TType* type = new TType(EbtVoid, EbpUndefined);
-        int size = 0;
+        int size;
         if (context->arraySizeErrorCheck(@3, $3, size))
             context->recover();
         type->setArraySize(size);
 
-        $$ = new TField(type, $1.string);
+        $$ = new TField(type, $1.string, @1);
     }
     ;
 
@@ -1902,7 +1798,7 @@ function_definition
     : function_prototype {
         TFunction* function = $1.function;
         
-        const TSymbol *builtIn = context->symbolTable.findBuiltIn(function->getMangledName());
+        const TSymbol *builtIn = context->symbolTable.findBuiltIn(function->getMangledName(), context->shaderVersion);
         
         if (builtIn)
         {
@@ -1910,7 +1806,7 @@ function_definition
             context->recover();
         }
         
-        TFunction* prevDec = static_cast<TFunction*>(context->symbolTable.find(function->getMangledName()));
+        TFunction* prevDec = static_cast<TFunction*>(context->symbolTable.find(function->getMangledName(), context->shaderVersion));
         //
         // Note:  'prevDec' could be 'function' if this is the first time we've seen function
         // as it would have just been put in the symbol table.  Otherwise, we're looking up
@@ -1961,7 +1857,7 @@ function_definition
                 //
                 // Insert the parameters with name in the symbol table.
                 //
-                if (! context->symbolTable.insert(*variable)) {
+                if (! context->symbolTable.declare(variable)) {
                     context->error(@1, "redefinition", variable->getName().c_str());
                     context->recover();
                     delete variable;
@@ -1973,9 +1869,8 @@ function_definition
                 paramNodes = context->intermediate.growAggregate(
                                                paramNodes,
                                                context->intermediate.addSymbol(variable->getUniqueId(),
-                                                                               variable->getName(),
-                                                                               variable->getType(),
-                                                                               @1),
+                                                                       variable->getName(),
+                                                                       variable->getType(), @1),
                                                @1);
             } else {
                 paramNodes = context->intermediate.growAggregate(paramNodes, context->intermediate.addSymbol(0, "", *param.type, @1), @1);
diff --git a/src/3rdparty/angle/src/compiler/translator/intermOut.cpp b/src/3rdparty/angle/src/compiler/translator/intermOut.cpp
index f2f918d77a..56340c6f9e 100644
--- a/src/3rdparty/angle/src/compiler/translator/intermOut.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/intermOut.cpp
@@ -1,10 +1,14 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
-#include "compiler/translator/localintermediate.h"
+#include "compiler/translator/Intermediate.h"
+#include "compiler/translator/SymbolTable.h"
+
+namespace
+{
 
 //
 // Two purposes:
@@ -19,22 +23,40 @@
 // Use this class to carry along data from node to node in
 // the traversal
 //
-class TOutputTraverser : public TIntermTraverser {
-public:
-    TOutputTraverser(TInfoSinkBase& i) : sink(i) { }
+class TOutputTraverser : public TIntermTraverser
+{
+  public:
+    TOutputTraverser(TInfoSinkBase &i)
+        : sink(i) { }
     TInfoSinkBase& sink;
 
-protected:
-    void visitSymbol(TIntermSymbol*);
-    void visitConstantUnion(TIntermConstantUnion*);
-    bool visitBinary(Visit visit, TIntermBinary*);
-    bool visitUnary(Visit visit, TIntermUnary*);
-    bool visitSelection(Visit visit, TIntermSelection*);
-    bool visitAggregate(Visit visit, TIntermAggregate*);
-    bool visitLoop(Visit visit, TIntermLoop*);
-    bool visitBranch(Visit visit, TIntermBranch*);
+  protected:
+    void visitSymbol(TIntermSymbol *);
+    void visitConstantUnion(TIntermConstantUnion *);
+    bool visitBinary(Visit visit, TIntermBinary *);
+    bool visitUnary(Visit visit, TIntermUnary *);
+    bool visitSelection(Visit visit, TIntermSelection *);
+    bool visitAggregate(Visit visit, TIntermAggregate *);
+    bool visitLoop(Visit visit, TIntermLoop *);
+    bool visitBranch(Visit visit, TIntermBranch *);
 };
 
+//
+// Helper functions for printing, not part of traversing.
+//
+void OutputTreeText(TInfoSinkBase &sink, TIntermNode *node, const int depth)
+{
+    int i;
+
+    sink.location(node->getLine());
+
+    for (i = 0; i < depth; ++i)
+        sink << "  ";
+}
+
+}  // namespace anonymous
+
+
 TString TType::getCompleteString() const
 {
     TStringStream stream;
@@ -43,30 +65,16 @@ TString TType::getCompleteString() const
         stream << getQualifierString() << " " << getPrecisionString() << " ";
     if (array)
         stream << "array[" << getArraySize() << "] of ";
-    if (matrix)
-        stream << static_cast<int>(size) << "X" << static_cast<int>(size) << " matrix of ";
-    else if (size > 1)
-        stream << static_cast<int>(size) << "-component vector of ";
+    if (isMatrix())
+        stream << getCols() << "X" << getRows() << " matrix of ";
+    else if (isVector())
+        stream << getNominalSize() << "-component vector of ";
 
     stream << getBasicString();
     return stream.str();
 }
 
 //
-// Helper functions for printing, not part of traversing.
-//
-
-void OutputTreeText(TInfoSinkBase& sink, TIntermNode* node, const int depth)
-{
-    int i;
-
-    sink.location(node->getLine());
-
-    for (i = 0; i < depth; ++i)
-        sink << "  ";
-}
-
-//
 // The rest of the file are the traversal functions.  The last one
 // is the one that starts the traversal.
 //
@@ -75,57 +83,126 @@ void OutputTreeText(TInfoSinkBase& sink, TIntermNode* node, const int depth)
 // return false.
 //
 
-void TOutputTraverser::visitSymbol(TIntermSymbol* node)
+void TOutputTraverser::visitSymbol(TIntermSymbol *node)
 {
-    OutputTreeText(sink, node, depth);
+    OutputTreeText(sink, node, mDepth);
 
     sink << "'" << node->getSymbol() << "' ";
     sink << "(" << node->getCompleteString() << ")\n";
 }
 
-bool TOutputTraverser::visitBinary(Visit visit, TIntermBinary* node)
+bool TOutputTraverser::visitBinary(Visit visit, TIntermBinary *node)
 {
     TInfoSinkBase& out = sink;
 
-    OutputTreeText(out, node, depth);
-
-    switch (node->getOp()) {
-        case EOpAssign:                   out << "move second child to first child";           break;
-        case EOpInitialize:               out << "initialize first child with second child";   break;
-        case EOpAddAssign:                out << "add second child into first child";          break;
-        case EOpSubAssign:                out << "subtract second child into first child";     break;
-        case EOpMulAssign:                out << "multiply second child into first child";     break;
-        case EOpVectorTimesMatrixAssign:  out << "matrix mult second child into first child";  break;
-        case EOpVectorTimesScalarAssign:  out << "vector scale second child into first child"; break;
-        case EOpMatrixTimesScalarAssign:  out << "matrix scale second child into first child"; break;
-        case EOpMatrixTimesMatrixAssign:  out << "matrix mult second child into first child"; break;
-        case EOpDivAssign:                out << "divide second child into first child";       break;
-        case EOpIndexDirect:   out << "direct index";   break;
-        case EOpIndexIndirect: out << "indirect index"; break;
-        case EOpIndexDirectStruct:   out << "direct index for structure";   break;
-        case EOpVectorSwizzle: out << "vector swizzle"; break;
-
-        case EOpAdd:    out << "add";                     break;
-        case EOpSub:    out << "subtract";                break;
-        case EOpMul:    out << "component-wise multiply"; break;
-        case EOpDiv:    out << "divide";                  break;
-        case EOpEqual:            out << "Compare Equal";                 break;
-        case EOpNotEqual:         out << "Compare Not Equal";             break;
-        case EOpLessThan:         out << "Compare Less Than";             break;
-        case EOpGreaterThan:      out << "Compare Greater Than";          break;
-        case EOpLessThanEqual:    out << "Compare Less Than or Equal";    break;
-        case EOpGreaterThanEqual: out << "Compare Greater Than or Equal"; break;
-
-        case EOpVectorTimesScalar: out << "vector-scale";          break;
-        case EOpVectorTimesMatrix: out << "vector-times-matrix";   break;
-        case EOpMatrixTimesVector: out << "matrix-times-vector";   break;
-        case EOpMatrixTimesScalar: out << "matrix-scale";          break;
-        case EOpMatrixTimesMatrix: out << "matrix-multiply";       break;
-
-        case EOpLogicalOr:  out << "logical-or";   break;
-        case EOpLogicalXor: out << "logical-xor"; break;
-        case EOpLogicalAnd: out << "logical-and"; break;
-        default: out << "<unknown op>";
+    OutputTreeText(out, node, mDepth);
+
+    switch (node->getOp())
+    {
+      case EOpAssign:
+        out << "move second child to first child";
+        break;
+      case EOpInitialize:
+        out << "initialize first child with second child";
+        break;
+      case EOpAddAssign:
+        out << "add second child into first child";
+        break;
+      case EOpSubAssign:
+        out << "subtract second child into first child";
+        break;
+      case EOpMulAssign:
+        out << "multiply second child into first child";
+        break;
+      case EOpVectorTimesMatrixAssign:
+        out << "matrix mult second child into first child";
+        break;
+      case EOpVectorTimesScalarAssign:
+        out << "vector scale second child into first child";
+        break;
+      case EOpMatrixTimesScalarAssign:
+        out << "matrix scale second child into first child";
+        break;
+      case EOpMatrixTimesMatrixAssign:
+        out << "matrix mult second child into first child";
+        break;
+      case EOpDivAssign:
+        out << "divide second child into first child";
+        break;
+      case EOpIndexDirect:
+        out << "direct index";
+        break;
+      case EOpIndexIndirect:
+        out << "indirect index";
+        break;
+      case EOpIndexDirectStruct:
+        out << "direct index for structure";
+        break;
+      case EOpIndexDirectInterfaceBlock:
+        out << "direct index for interface block";
+        break;
+      case EOpVectorSwizzle:
+        out << "vector swizzle";
+        break;
+
+      case EOpAdd:
+        out << "add";
+        break;
+      case EOpSub:
+        out << "subtract";
+        break;
+      case EOpMul:
+        out << "component-wise multiply";
+        break;
+      case EOpDiv:
+        out << "divide";
+        break;
+      case EOpEqual:
+        out << "Compare Equal";
+        break;
+      case EOpNotEqual:
+        out << "Compare Not Equal";
+        break;
+      case EOpLessThan:
+        out << "Compare Less Than";
+        break;
+      case EOpGreaterThan:
+        out << "Compare Greater Than";
+        break;
+      case EOpLessThanEqual:
+        out << "Compare Less Than or Equal";
+        break;
+      case EOpGreaterThanEqual:
+        out << "Compare Greater Than or Equal";
+        break;
+
+      case EOpVectorTimesScalar:
+        out << "vector-scale";
+        break;
+      case EOpVectorTimesMatrix:
+        out << "vector-times-matrix";
+        break;
+      case EOpMatrixTimesVector:
+        out << "matrix-times-vector";
+        break;
+      case EOpMatrixTimesScalar:
+        out << "matrix-scale";
+        break;
+      case EOpMatrixTimesMatrix:
+        out << "matrix-multiply";
+        break;
+
+      case EOpLogicalOr:
+        out << "logical-or";
+        break;
+      case EOpLogicalXor:
+        out << "logical-xor";
+        break;
+      case EOpLogicalAnd:
+        out << "logical-and";
+        break;
+      default:
+        out << "<unknown op>";
     }
 
     out << " (" << node->getCompleteString() << ")";
@@ -135,63 +212,57 @@ bool TOutputTraverser::visitBinary(Visit visit, TIntermBinary* node)
     return true;
 }
 
-bool TOutputTraverser::visitUnary(Visit visit, TIntermUnary* node)
+bool TOutputTraverser::visitUnary(Visit visit, TIntermUnary *node)
 {
     TInfoSinkBase& out = sink;
 
-    OutputTreeText(out, node, depth);
-
-    switch (node->getOp()) {
-        case EOpNegative:       out << "Negate value";         break;
-        case EOpVectorLogicalNot:
-        case EOpLogicalNot:     out << "Negate conditional";   break;
-
-        case EOpPostIncrement:  out << "Post-Increment";       break;
-        case EOpPostDecrement:  out << "Post-Decrement";       break;
-        case EOpPreIncrement:   out << "Pre-Increment";        break;
-        case EOpPreDecrement:   out << "Pre-Decrement";        break;
-
-        case EOpConvIntToBool:  out << "Convert int to bool";  break;
-        case EOpConvFloatToBool:out << "Convert float to bool";break;
-        case EOpConvBoolToFloat:out << "Convert bool to float";break;
-        case EOpConvIntToFloat: out << "Convert int to float"; break;
-        case EOpConvFloatToInt: out << "Convert float to int"; break;
-        case EOpConvBoolToInt:  out << "Convert bool to int";  break;
-
-        case EOpRadians:        out << "radians";              break;
-        case EOpDegrees:        out << "degrees";              break;
-        case EOpSin:            out << "sine";                 break;
-        case EOpCos:            out << "cosine";               break;
-        case EOpTan:            out << "tangent";              break;
-        case EOpAsin:           out << "arc sine";             break;
-        case EOpAcos:           out << "arc cosine";           break;
-        case EOpAtan:           out << "arc tangent";          break;
-
-        case EOpExp:            out << "exp";                  break;
-        case EOpLog:            out << "log";                  break;
-        case EOpExp2:           out << "exp2";                 break;
-        case EOpLog2:           out << "log2";                 break;
-        case EOpSqrt:           out << "sqrt";                 break;
-        case EOpInverseSqrt:    out << "inverse sqrt";         break;
-
-        case EOpAbs:            out << "Absolute value";       break;
-        case EOpSign:           out << "Sign";                 break;
-        case EOpFloor:          out << "Floor";                break;
-        case EOpCeil:           out << "Ceiling";              break;
-        case EOpFract:          out << "Fraction";             break;
-
-        case EOpLength:         out << "length";               break;
-        case EOpNormalize:      out << "normalize";            break;
-            //	case EOpDPdx:           out << "dPdx";                 break;               
-            //	case EOpDPdy:           out << "dPdy";                 break;   
-            //	case EOpFwidth:         out << "fwidth";               break;                   
-
-        case EOpAny:            out << "any";                  break;
-        case EOpAll:            out << "all";                  break;
-
-        default:
-            out.prefix(EPrefixError);
-            out << "Bad unary op";
+    OutputTreeText(out, node, mDepth);
+
+    switch (node->getOp())
+    {
+      case EOpNegative:       out << "Negate value";         break;
+      case EOpVectorLogicalNot:
+      case EOpLogicalNot:     out << "Negate conditional";   break;
+
+      case EOpPostIncrement:  out << "Post-Increment";       break;
+      case EOpPostDecrement:  out << "Post-Decrement";       break;
+      case EOpPreIncrement:   out << "Pre-Increment";        break;
+      case EOpPreDecrement:   out << "Pre-Decrement";        break;
+
+      case EOpRadians:        out << "radians";              break;
+      case EOpDegrees:        out << "degrees";              break;
+      case EOpSin:            out << "sine";                 break;
+      case EOpCos:            out << "cosine";               break;
+      case EOpTan:            out << "tangent";              break;
+      case EOpAsin:           out << "arc sine";             break;
+      case EOpAcos:           out << "arc cosine";           break;
+      case EOpAtan:           out << "arc tangent";          break;
+
+      case EOpExp:            out << "exp";                  break;
+      case EOpLog:            out << "log";                  break;
+      case EOpExp2:           out << "exp2";                 break;
+      case EOpLog2:           out << "log2";                 break;
+      case EOpSqrt:           out << "sqrt";                 break;
+      case EOpInverseSqrt:    out << "inverse sqrt";         break;
+
+      case EOpAbs:            out << "Absolute value";       break;
+      case EOpSign:           out << "Sign";                 break;
+      case EOpFloor:          out << "Floor";                break;
+      case EOpCeil:           out << "Ceiling";              break;
+      case EOpFract:          out << "Fraction";             break;
+
+      case EOpLength:         out << "length";               break;
+      case EOpNormalize:      out << "normalize";            break;
+      // case EOpDPdx:           out << "dPdx";                 break;
+      // case EOpDPdy:           out << "dPdy";                 break;
+      // case EOpFwidth:         out << "fwidth";               break;
+
+      case EOpAny:            out << "any";                  break;
+      case EOpAll:            out << "all";                  break;
+
+      default:
+        out.prefix(EPrefixError);
+        out << "Bad unary op";
     }
 
     out << " (" << node->getCompleteString() << ")";
@@ -201,74 +272,81 @@ bool TOutputTraverser::visitUnary(Visit visit, TIntermUnary* node)
     return true;
 }
 
-bool TOutputTraverser::visitAggregate(Visit visit, TIntermAggregate* node)
+bool TOutputTraverser::visitAggregate(Visit visit, TIntermAggregate *node)
 {
-    TInfoSinkBase& out = sink;
+    TInfoSinkBase &out = sink;
 
-    if (node->getOp() == EOpNull) {
+    if (node->getOp() == EOpNull)
+    {
         out.prefix(EPrefixError);
         out << "node is still EOpNull!";
         return true;
     }
 
-    OutputTreeText(out, node, depth);
-
-    switch (node->getOp()) {
-        case EOpSequence:      out << "Sequence\n"; return true;
-        case EOpComma:         out << "Comma\n"; return true;
-        case EOpFunction:      out << "Function Definition: " << node->getName(); break;
-        case EOpFunctionCall:  out << "Function Call: " << node->getName(); break;
-        case EOpParameters:    out << "Function Parameters: ";              break;
-
-        case EOpConstructFloat: out << "Construct float"; break;
-        case EOpConstructVec2:  out << "Construct vec2";  break;
-        case EOpConstructVec3:  out << "Construct vec3";  break;
-        case EOpConstructVec4:  out << "Construct vec4";  break;
-        case EOpConstructBool:  out << "Construct bool";  break;
-        case EOpConstructBVec2: out << "Construct bvec2"; break;
-        case EOpConstructBVec3: out << "Construct bvec3"; break;
-        case EOpConstructBVec4: out << "Construct bvec4"; break;
-        case EOpConstructInt:   out << "Construct int";   break;
-        case EOpConstructIVec2: out << "Construct ivec2"; break;
-        case EOpConstructIVec3: out << "Construct ivec3"; break;
-        case EOpConstructIVec4: out << "Construct ivec4"; break;
-        case EOpConstructMat2:  out << "Construct mat2";  break;
-        case EOpConstructMat3:  out << "Construct mat3";  break;
-        case EOpConstructMat4:  out << "Construct mat4";  break;
-        case EOpConstructStruct:  out << "Construct structure";  break;
-
-        case EOpLessThan:         out << "Compare Less Than";             break;
-        case EOpGreaterThan:      out << "Compare Greater Than";          break;
-        case EOpLessThanEqual:    out << "Compare Less Than or Equal";    break;
-        case EOpGreaterThanEqual: out << "Compare Greater Than or Equal"; break;
-        case EOpVectorEqual:      out << "Equal";                         break;
-        case EOpVectorNotEqual:   out << "NotEqual";                      break;
-
-        case EOpMod:           out << "mod";         break;
-        case EOpPow:           out << "pow";         break;
-
-        case EOpAtan:          out << "arc tangent"; break;
-
-        case EOpMin:           out << "min";         break;
-        case EOpMax:           out << "max";         break;
-        case EOpClamp:         out << "clamp";       break;
-        case EOpMix:           out << "mix";         break;
-        case EOpStep:          out << "step";        break;
-        case EOpSmoothStep:    out << "smoothstep";  break;
-
-        case EOpDistance:      out << "distance";                break;
-        case EOpDot:           out << "dot-product";             break;
-        case EOpCross:         out << "cross-product";           break;
-        case EOpFaceForward:   out << "face-forward";            break;
-        case EOpReflect:       out << "reflect";                 break;
-        case EOpRefract:       out << "refract";                 break;
-        case EOpMul:           out << "component-wise multiply"; break;
-
-        case EOpDeclaration:   out << "Declaration: ";   break;
-
-        default:
-            out.prefix(EPrefixError);
-            out << "Bad aggregation op";
+    OutputTreeText(out, node, mDepth);
+
+    switch (node->getOp())
+    {
+      case EOpSequence:      out << "Sequence\n"; return true;
+      case EOpComma:         out << "Comma\n"; return true;
+      case EOpFunction:      out << "Function Definition: " << node->getName(); break;
+      case EOpFunctionCall:  out << "Function Call: " << node->getName(); break;
+      case EOpParameters:    out << "Function Parameters: ";              break;
+
+      case EOpConstructFloat: out << "Construct float"; break;
+      case EOpConstructVec2:  out << "Construct vec2";  break;
+      case EOpConstructVec3:  out << "Construct vec3";  break;
+      case EOpConstructVec4:  out << "Construct vec4";  break;
+      case EOpConstructBool:  out << "Construct bool";  break;
+      case EOpConstructBVec2: out << "Construct bvec2"; break;
+      case EOpConstructBVec3: out << "Construct bvec3"; break;
+      case EOpConstructBVec4: out << "Construct bvec4"; break;
+      case EOpConstructInt:   out << "Construct int";   break;
+      case EOpConstructIVec2: out << "Construct ivec2"; break;
+      case EOpConstructIVec3: out << "Construct ivec3"; break;
+      case EOpConstructIVec4: out << "Construct ivec4"; break;
+      case EOpConstructUInt:  out << "Construct uint";  break;
+      case EOpConstructUVec2: out << "Construct uvec2"; break;
+      case EOpConstructUVec3: out << "Construct uvec3"; break;
+      case EOpConstructUVec4: out << "Construct uvec4"; break;
+      case EOpConstructMat2:  out << "Construct mat2";  break;
+      case EOpConstructMat3:  out << "Construct mat3";  break;
+      case EOpConstructMat4:  out << "Construct mat4";  break;
+      case EOpConstructStruct:  out << "Construct structure";  break;
+
+      case EOpLessThan:         out << "Compare Less Than";             break;
+      case EOpGreaterThan:      out << "Compare Greater Than";          break;
+      case EOpLessThanEqual:    out << "Compare Less Than or Equal";    break;
+      case EOpGreaterThanEqual: out << "Compare Greater Than or Equal"; break;
+      case EOpVectorEqual:      out << "Equal";                         break;
+      case EOpVectorNotEqual:   out << "NotEqual";                      break;
+
+      case EOpMod:           out << "mod";         break;
+      case EOpPow:           out << "pow";         break;
+
+      case EOpAtan:          out << "arc tangent"; break;
+
+      case EOpMin:           out << "min";         break;
+      case EOpMax:           out << "max";         break;
+      case EOpClamp:         out << "clamp";       break;
+      case EOpMix:           out << "mix";         break;
+      case EOpStep:          out << "step";        break;
+      case EOpSmoothStep:    out << "smoothstep";  break;
+
+      case EOpDistance:      out << "distance";                break;
+      case EOpDot:           out << "dot-product";             break;
+      case EOpCross:         out << "cross-product";           break;
+      case EOpFaceForward:   out << "face-forward";            break;
+      case EOpReflect:       out << "reflect";                 break;
+      case EOpRefract:       out << "refract";                 break;
+      case EOpMul:           out << "component-wise multiply"; break;
+
+      case EOpDeclaration:   out << "Declaration: ";   break;
+      case EOpInvariantDeclaration: out << "Invariant Declaration: "; break;
+
+      default:
+        out.prefix(EPrefixError);
+        out << "Bad aggregation op";
     }
 
     if (node->getOp() != EOpSequence && node->getOp() != EOpParameters)
@@ -279,131 +357,156 @@ bool TOutputTraverser::visitAggregate(Visit visit, TIntermAggregate* node)
     return true;
 }
 
-bool TOutputTraverser::visitSelection(Visit visit, TIntermSelection* node)
+bool TOutputTraverser::visitSelection(Visit visit, TIntermSelection *node)
 {
-    TInfoSinkBase& out = sink;
+    TInfoSinkBase &out = sink;
 
-    OutputTreeText(out, node, depth);
+    OutputTreeText(out, node, mDepth);
 
     out << "Test condition and select";
     out << " (" << node->getCompleteString() << ")\n";
 
-    ++depth;
+    ++mDepth;
 
-    OutputTreeText(sink, node, depth);
+    OutputTreeText(sink, node, mDepth);
     out << "Condition\n";
     node->getCondition()->traverse(this);
 
-    OutputTreeText(sink, node, depth);
-    if (node->getTrueBlock()) {
+    OutputTreeText(sink, node, mDepth);
+    if (node->getTrueBlock())
+    {
         out << "true case\n";
         node->getTrueBlock()->traverse(this);
-    } else
+    }
+    else
+    {
         out << "true case is null\n";
+    }
 
-    if (node->getFalseBlock()) {
-        OutputTreeText(sink, node, depth);
+    if (node->getFalseBlock())
+    {
+        OutputTreeText(sink, node, mDepth);
         out << "false case\n";
         node->getFalseBlock()->traverse(this);
     }
 
-    --depth;
+    --mDepth;
 
     return false;
 }
 
-void TOutputTraverser::visitConstantUnion(TIntermConstantUnion* node)
+void TOutputTraverser::visitConstantUnion(TIntermConstantUnion *node)
 {
-    TInfoSinkBase& out = sink;
+    TInfoSinkBase &out = sink;
 
     size_t size = node->getType().getObjectSize();
 
-    for (size_t i = 0; i < size; i++) {
-        OutputTreeText(out, node, depth);
-        switch (node->getUnionArrayPointer()[i].getType()) {
-            case EbtBool:
-                if (node->getUnionArrayPointer()[i].getBConst())
-                    out << "true";
-                else
-                    out << "false";
-
-                out << " (" << "const bool" << ")";
-                out << "\n";
-                break;
-            case EbtFloat:
-                out << node->getUnionArrayPointer()[i].getFConst();
-                out << " (const float)\n";
-                break;
-            case EbtInt:
-                out << node->getUnionArrayPointer()[i].getIConst();
-                out << " (const int)\n";
-                break;
-            default:
-                out.message(EPrefixInternalError, node->getLine(), "Unknown constant");
-                break;
+    for (size_t i = 0; i < size; i++)
+    {
+        OutputTreeText(out, node, mDepth);
+        switch (node->getUnionArrayPointer()[i].getType())
+        {
+          case EbtBool:
+            if (node->getUnionArrayPointer()[i].getBConst())
+                out << "true";
+            else
+                out << "false";
+
+            out << " (" << "const bool" << ")";
+            out << "\n";
+            break;
+          case EbtFloat:
+            out << node->getUnionArrayPointer()[i].getFConst();
+            out << " (const float)\n";
+            break;
+          case EbtInt:
+            out << node->getUnionArrayPointer()[i].getIConst();
+            out << " (const int)\n";
+            break;
+          case EbtUInt:
+            out << node->getUnionArrayPointer()[i].getUConst();
+            out << " (const uint)\n";
+            break;
+          default:
+            out.message(EPrefixInternalError, node->getLine(), "Unknown constant");
+            break;
         }
     }
 }
 
-bool TOutputTraverser::visitLoop(Visit visit, TIntermLoop* node)
+bool TOutputTraverser::visitLoop(Visit visit, TIntermLoop *node)
 {
-    TInfoSinkBase& out = sink;
+    TInfoSinkBase &out = sink;
 
-    OutputTreeText(out, node, depth);
+    OutputTreeText(out, node, mDepth);
 
     out << "Loop with condition ";
     if (node->getType() == ELoopDoWhile)
         out << "not ";
     out << "tested first\n";
 
-    ++depth;
+    ++mDepth;
 
-    OutputTreeText(sink, node, depth);
-    if (node->getCondition()) {
+    OutputTreeText(sink, node, mDepth);
+    if (node->getCondition())
+    {
         out << "Loop Condition\n";
         node->getCondition()->traverse(this);
-    } else
+    }
+    else
+    {
         out << "No loop condition\n";
+    }
 
-    OutputTreeText(sink, node, depth);
-    if (node->getBody()) {
+    OutputTreeText(sink, node, mDepth);
+    if (node->getBody())
+    {
         out << "Loop Body\n";
         node->getBody()->traverse(this);
-    } else
+    }
+    else
+    {
         out << "No loop body\n";
+    }
 
-    if (node->getExpression()) {
-        OutputTreeText(sink, node, depth);
+    if (node->getExpression())
+    {
+        OutputTreeText(sink, node, mDepth);
         out << "Loop Terminal Expression\n";
         node->getExpression()->traverse(this);
     }
 
-    --depth;
+    --mDepth;
 
     return false;
 }
 
-bool TOutputTraverser::visitBranch(Visit visit, TIntermBranch* node)
+bool TOutputTraverser::visitBranch(Visit visit, TIntermBranch *node)
 {
-    TInfoSinkBase& out = sink;
+    TInfoSinkBase &out = sink;
 
-    OutputTreeText(out, node, depth);
+    OutputTreeText(out, node, mDepth);
 
-    switch (node->getFlowOp()) {
-        case EOpKill:      out << "Branch: Kill";           break;
-        case EOpBreak:     out << "Branch: Break";          break;
-        case EOpContinue:  out << "Branch: Continue";       break;
-        case EOpReturn:    out << "Branch: Return";         break;
-        default:           out << "Branch: Unknown Branch"; break;
+    switch (node->getFlowOp())
+    {
+      case EOpKill:      out << "Branch: Kill";           break;
+      case EOpBreak:     out << "Branch: Break";          break;
+      case EOpContinue:  out << "Branch: Continue";       break;
+      case EOpReturn:    out << "Branch: Return";         break;
+      default:           out << "Branch: Unknown Branch"; break;
     }
 
-    if (node->getExpression()) {
+    if (node->getExpression())
+    {
         out << " with expression\n";
-        ++depth;
+        ++mDepth;
         node->getExpression()->traverse(this);
-        --depth;
-    } else
+        --mDepth;
+    }
+    else
+    {
         out << "\n";
+    }
 
     return false;
 }
@@ -413,12 +516,12 @@ bool TOutputTraverser::visitBranch(Visit visit, TIntermBranch* node)
 // Individual functions can be initialized to 0 to skip processing of that
 // type of node.  It's children will still be processed.
 //
-void TIntermediate::outputTree(TIntermNode* root)
+void TIntermediate::outputTree(TIntermNode *root)
 {
-    if (root == 0)
+    if (root == NULL)
         return;
 
-    TOutputTraverser it(infoSink.info);
+    TOutputTraverser it(mInfoSink.info);
 
     root->traverse(&it);
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/intermediate.h b/src/3rdparty/angle/src/compiler/translator/intermediate.h
index 8f9fe23d3b..3b7e7bd802 100644
--- a/src/3rdparty/angle/src/compiler/translator/intermediate.h
+++ b/src/3rdparty/angle/src/compiler/translator/intermediate.h
@@ -1,635 +1,67 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
-//
-// Definition of the in-memory high-level intermediate representation
-// of shaders.  This is a tree that parser creates.
-//
-// Nodes in the tree are defined as a hierarchy of classes derived from 
-// TIntermNode. Each is a node in a tree.  There is no preset branching factor;
-// each node can have it's own type of list of children.
-//
-
-#ifndef __INTERMEDIATE_H
-#define __INTERMEDIATE_H
-
-#include "GLSLANG/ShaderLang.h"
-
-#include <algorithm>
-#include "compiler/translator/Common.h"
-#include "compiler/translator/Types.h"
-#include "compiler/translator/ConstantUnion.h"
-
-//
-// Operators used by the high-level (parse tree) representation.
-//
-enum TOperator {
-    EOpNull,            // if in a node, should only mean a node is still being built
-    EOpSequence,        // denotes a list of statements, or parameters, etc.
-    EOpFunctionCall,    
-    EOpFunction,        // For function definition
-    EOpParameters,      // an aggregate listing the parameters to a function
-
-    EOpDeclaration,
-    EOpPrototype,
-
-    //
-    // Unary operators
-    //
-
-    EOpNegative,
-    EOpLogicalNot,
-    EOpVectorLogicalNot,
-
-    EOpPostIncrement,
-    EOpPostDecrement,
-    EOpPreIncrement,
-    EOpPreDecrement,
-
-    EOpConvIntToBool,
-    EOpConvFloatToBool,
-    EOpConvBoolToFloat,
-    EOpConvIntToFloat,
-    EOpConvFloatToInt,
-    EOpConvBoolToInt,
-
-    //
-    // binary operations
-    //
-
-    EOpAdd,
-    EOpSub,
-    EOpMul,
-    EOpDiv,
-    EOpEqual,
-    EOpNotEqual,
-    EOpVectorEqual,
-    EOpVectorNotEqual,
-    EOpLessThan,
-    EOpGreaterThan,
-    EOpLessThanEqual,
-    EOpGreaterThanEqual,
-    EOpComma,
-
-    EOpVectorTimesScalar,
-    EOpVectorTimesMatrix,
-    EOpMatrixTimesVector,
-    EOpMatrixTimesScalar,
-
-    EOpLogicalOr,
-    EOpLogicalXor,
-    EOpLogicalAnd,
-
-    EOpIndexDirect,
-    EOpIndexIndirect,
-    EOpIndexDirectStruct,
-
-    EOpVectorSwizzle,
+#ifndef COMPILER_TRANSLATOR_LOCAL_INTERMEDIATE_H_
+#define COMPILER_TRANSLATOR_LOCAL_INTERMEDIATE_H_
 
-    //
-    // Built-in functions potentially mapped to operators
-    //
+#include "compiler/translator/IntermNode.h"
 
-    EOpRadians,
-    EOpDegrees,
-    EOpSin,
-    EOpCos,
-    EOpTan,
-    EOpAsin,
-    EOpAcos,
-    EOpAtan,
-
-    EOpPow,
-    EOpExp,
-    EOpLog,
-    EOpExp2,
-    EOpLog2,
-    EOpSqrt,
-    EOpInverseSqrt,
-
-    EOpAbs,
-    EOpSign,
-    EOpFloor,
-    EOpCeil,
-    EOpFract,
-    EOpMod,
-    EOpMin,
-    EOpMax,
-    EOpClamp,
-    EOpMix,
-    EOpStep,
-    EOpSmoothStep,
-
-    EOpLength,
-    EOpDistance,
-    EOpDot,
-    EOpCross,
-    EOpNormalize,
-    EOpFaceForward,
-    EOpReflect,
-    EOpRefract,
-
-    EOpDFdx,            // Fragment only, OES_standard_derivatives extension
-    EOpDFdy,            // Fragment only, OES_standard_derivatives extension
-    EOpFwidth,          // Fragment only, OES_standard_derivatives extension
-
-    EOpMatrixTimesMatrix,
-
-    EOpAny,
-    EOpAll,
-
-    //
-    // Branch
-    //
-
-    EOpKill,            // Fragment only
-    EOpReturn,
-    EOpBreak,
-    EOpContinue,
-
-    //
-    // Constructors
-    //
-
-    EOpConstructInt,
-    EOpConstructBool,
-    EOpConstructFloat,
-    EOpConstructVec2,
-    EOpConstructVec3,
-    EOpConstructVec4,
-    EOpConstructBVec2,
-    EOpConstructBVec3,
-    EOpConstructBVec4,
-    EOpConstructIVec2,
-    EOpConstructIVec3,
-    EOpConstructIVec4,
-    EOpConstructMat2,
-    EOpConstructMat3,
-    EOpConstructMat4,
-    EOpConstructStruct,
-
-    //
-    // moves
-    //
-
-    EOpAssign,
-    EOpInitialize,
-    EOpAddAssign,
-    EOpSubAssign,
-    EOpMulAssign,
-    EOpVectorTimesMatrixAssign,
-    EOpVectorTimesScalarAssign,
-    EOpMatrixTimesScalarAssign,
-    EOpMatrixTimesMatrixAssign,
-    EOpDivAssign
-};
-
-extern const char* getOperatorString(TOperator op);
-
-class TIntermTraverser;
-class TIntermAggregate;
-class TIntermBinary;
-class TIntermUnary;
-class TIntermConstantUnion;
-class TIntermSelection;
-class TIntermTyped;
-class TIntermSymbol;
-class TIntermLoop;
-class TInfoSink;
-
-//
-// Base class for the tree nodes
-//
-class TIntermNode {
-public:
-    POOL_ALLOCATOR_NEW_DELETE();
-    TIntermNode() {
-        // TODO: Move this to TSourceLoc constructor
-        // after getting rid of TPublicType.
-        line.first_file = line.last_file = 0;
-        line.first_line = line.last_line = 0;
-    }
-    virtual ~TIntermNode() { }
-
-    const TSourceLoc& getLine() const { return line; }
-    void setLine(const TSourceLoc& l) { line = l; }
-
-    virtual void traverse(TIntermTraverser*) = 0;
-    virtual TIntermTyped* getAsTyped() { return 0; }
-    virtual TIntermConstantUnion* getAsConstantUnion() { return 0; }
-    virtual TIntermAggregate* getAsAggregate() { return 0; }
-    virtual TIntermBinary* getAsBinaryNode() { return 0; }
-    virtual TIntermUnary* getAsUnaryNode() { return 0; }
-    virtual TIntermSelection* getAsSelectionNode() { return 0; }
-    virtual TIntermSymbol* getAsSymbolNode() { return 0; }
-    virtual TIntermLoop* getAsLoopNode() { return 0; }
-
-    // Replace a child node. Return true if |original| is a child
-    // node and it is replaced; otherwise, return false.
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement) = 0;
-
-protected:
-    TSourceLoc line;
-};
-
-//
-// This is just to help yacc.
-//
-struct TIntermNodePair {
-    TIntermNode* node1;
-    TIntermNode* node2;
-};
-
-//
-// Intermediate class for nodes that have a type.
-//
-class TIntermTyped : public TIntermNode {
-public:
-    TIntermTyped(const TType& t) : type(t)  { }
-    virtual TIntermTyped* getAsTyped() { return this; }
-
-    virtual bool hasSideEffects() const = 0;
-
-    void setType(const TType& t) { type = t; }
-    const TType& getType() const { return type; }
-    TType* getTypePointer() { return &type; }
-
-    TBasicType getBasicType() const { return type.getBasicType(); }
-    TQualifier getQualifier() const { return type.getQualifier(); }
-    TPrecision getPrecision() const { return type.getPrecision(); }
-    int getNominalSize() const { return type.getNominalSize(); }
-    
-    bool isMatrix() const { return type.isMatrix(); }
-    bool isArray()  const { return type.isArray(); }
-    bool isVector() const { return type.isVector(); }
-    bool isScalar() const { return type.isScalar(); }
-    const char* getBasicString() const { return type.getBasicString(); }
-    const char* getQualifierString() const { return type.getQualifierString(); }
-    TString getCompleteString() const { return type.getCompleteString(); }
-
-    int totalRegisterCount() const { return type.totalRegisterCount(); }
-    int elementRegisterCount() const { return type.elementRegisterCount(); }
-    int getArraySize() const { return type.getArraySize(); }
-
-protected:
-    TType type;
-};
-
-//
-// Handle for, do-while, and while loops.
-//
-enum TLoopType {
-    ELoopFor,
-    ELoopWhile,
-    ELoopDoWhile
-};
-
-class TIntermLoop : public TIntermNode {
-public:
-    TIntermLoop(TLoopType aType,
-                TIntermNode *aInit, TIntermTyped* aCond, TIntermTyped* aExpr,
-                TIntermNode* aBody) :
-            type(aType),
-            init(aInit),
-            cond(aCond),
-            expr(aExpr),
-            body(aBody),
-            unrollFlag(false) { }
-
-    virtual TIntermLoop* getAsLoopNode() { return this; }
-    virtual void traverse(TIntermTraverser*);
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement);
-
-    TLoopType getType() const { return type; }
-    TIntermNode* getInit() { return init; }
-    TIntermTyped* getCondition() { return cond; }
-    TIntermTyped* getExpression() { return expr; }
-    TIntermNode* getBody() { return body; }
-
-    void setUnrollFlag(bool flag) { unrollFlag = flag; }
-    bool getUnrollFlag() { return unrollFlag; }
-
-protected:
-    TLoopType type;
-    TIntermNode* init;  // for-loop initialization
-    TIntermTyped* cond; // loop exit condition
-    TIntermTyped* expr; // for-loop expression
-    TIntermNode* body;  // loop body
-
-    bool unrollFlag; // Whether the loop should be unrolled or not.
-};
-
-//
-// Handle break, continue, return, and kill.
-//
-class TIntermBranch : public TIntermNode {
-public:
-    TIntermBranch(TOperator op, TIntermTyped* e) :
-            flowOp(op),
-            expression(e) { }
-
-    virtual void traverse(TIntermTraverser*);
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement);
-
-    TOperator getFlowOp() { return flowOp; }
-    TIntermTyped* getExpression() { return expression; }
-
-protected:
-    TOperator flowOp;
-    TIntermTyped* expression;  // non-zero except for "return exp;" statements
-};
-
-//
-// Nodes that correspond to symbols or constants in the source code.
-//
-class TIntermSymbol : public TIntermTyped {
-public:
-    // if symbol is initialized as symbol(sym), the memory comes from the poolallocator of sym. If sym comes from
-    // per process globalpoolallocator, then it causes increased memory usage per compile
-    // it is essential to use "symbol = sym" to assign to symbol
-    TIntermSymbol(int i, const TString& sym, const TType& t) : 
-            TIntermTyped(t), id(i)  { symbol = sym; originalSymbol = sym; } 
-
-    virtual bool hasSideEffects() const { return false; }
-
-    int getId() const { return id; }
-    const TString& getSymbol() const { return symbol; }
-
-    void setId(int newId) { id = newId; }
-    void setSymbol(const TString& sym) { symbol = sym; }
-
-    const TString& getOriginalSymbol() const { return originalSymbol; }
-
-    virtual void traverse(TIntermTraverser*);
-    virtual TIntermSymbol* getAsSymbolNode() { return this; }
-    virtual bool replaceChildNode(TIntermNode *, TIntermNode *) { return false; }
-
-protected:
-    int id;
-    TString symbol;
-    TString originalSymbol;
-};
-
-class TIntermConstantUnion : public TIntermTyped {
-public:
-    TIntermConstantUnion(ConstantUnion *unionPointer, const TType& t) : TIntermTyped(t), unionArrayPointer(unionPointer) { }
-
-    virtual bool hasSideEffects() const { return false; }
-
-    ConstantUnion* getUnionArrayPointer() const { return unionArrayPointer; }
-    
-    int getIConst(size_t index) const { return unionArrayPointer ? unionArrayPointer[index].getIConst() : 0; }
-    float getFConst(size_t index) const { return unionArrayPointer ? unionArrayPointer[index].getFConst() : 0.0f; }
-    bool getBConst(size_t index) const { return unionArrayPointer ? unionArrayPointer[index].getBConst() : false; }
-
-    virtual TIntermConstantUnion* getAsConstantUnion()  { return this; }
-    virtual void traverse(TIntermTraverser*);
-    virtual bool replaceChildNode(TIntermNode *, TIntermNode *) { return false; }
-
-    TIntermTyped* fold(TOperator, TIntermTyped*, TInfoSink&);
-
-protected:
-    ConstantUnion *unionArrayPointer;
-};
-
-//
-// Intermediate class for node types that hold operators.
-//
-class TIntermOperator : public TIntermTyped {
-public:
-    TOperator getOp() const { return op; }
-    void setOp(TOperator o) { op = o; }
-
-    bool isAssignment() const;
-    bool isConstructor() const;
-
-    virtual bool hasSideEffects() const { return isAssignment(); }
-
-protected:
-    TIntermOperator(TOperator o) : TIntermTyped(TType(EbtFloat, EbpUndefined)), op(o) {}
-    TIntermOperator(TOperator o, const TType& t) : TIntermTyped(t), op(o) {}
-    TOperator op;
-};
-
-//
-// Nodes for all the basic binary math operators.
-//
-class TIntermBinary : public TIntermOperator {
-public:
-    TIntermBinary(TOperator o) : TIntermOperator(o), addIndexClamp(false) {}
-
-    virtual TIntermBinary* getAsBinaryNode() { return this; }
-    virtual void traverse(TIntermTraverser*);
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement);
-
-    virtual bool hasSideEffects() const { return (isAssignment() || left->hasSideEffects() || right->hasSideEffects()); }
-
-    void setLeft(TIntermTyped* n) { left = n; }
-    void setRight(TIntermTyped* n) { right = n; }
-    TIntermTyped* getLeft() const { return left; }
-    TIntermTyped* getRight() const { return right; }
-    bool promote(TInfoSink&);
-
-    void setAddIndexClamp() { addIndexClamp = true; }
-    bool getAddIndexClamp() { return addIndexClamp; }
-
-protected:
-    TIntermTyped* left;
-    TIntermTyped* right;
-
-    // If set to true, wrap any EOpIndexIndirect with a clamp to bounds.
-    bool addIndexClamp;
-};
-
-//
-// Nodes for unary math operators.
-//
-class TIntermUnary : public TIntermOperator {
-public:
-    TIntermUnary(TOperator o, const TType& t) : TIntermOperator(o, t), operand(0), useEmulatedFunction(false) {}
-    TIntermUnary(TOperator o) : TIntermOperator(o), operand(0), useEmulatedFunction(false) {}
-
-    virtual void traverse(TIntermTraverser*);
-    virtual TIntermUnary* getAsUnaryNode() { return this; }
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement);
-
-    virtual bool hasSideEffects() const { return (isAssignment() || operand->hasSideEffects()); }
-
-    void setOperand(TIntermTyped* o) { operand = o; }
-    TIntermTyped* getOperand() { return operand; }    
-    bool promote(TInfoSink&);
-
-    void setUseEmulatedFunction() { useEmulatedFunction = true; }
-    bool getUseEmulatedFunction() { return useEmulatedFunction; }
-
-protected:
-    TIntermTyped* operand;
-
-    // If set to true, replace the built-in function call with an emulated one
-    // to work around driver bugs.
-    bool useEmulatedFunction;
-};
-
-typedef TVector<TIntermNode*> TIntermSequence;
-typedef TVector<int> TQualifierList;
-
-//
-// Nodes that operate on an arbitrary sized set of children.
-//
-class TIntermAggregate : public TIntermOperator {
-public:
-    TIntermAggregate() : TIntermOperator(EOpNull), userDefined(false), useEmulatedFunction(false) { }
-    TIntermAggregate(TOperator o) : TIntermOperator(o), useEmulatedFunction(false) { }
-    ~TIntermAggregate() { }
-
-    virtual TIntermAggregate* getAsAggregate() { return this; }
-    virtual void traverse(TIntermTraverser*);
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement);
-
-    // Conservatively assume function calls and other aggregate operators have side-effects
-    virtual bool hasSideEffects() const { return true; }
-
-    TIntermSequence& getSequence() { return sequence; }
-
-    void setName(const TString& n) { name = n; }
-    const TString& getName() const { return name; }
-
-    void setUserDefined() { userDefined = true; }
-    bool isUserDefined() const { return userDefined; }
-
-    void setOptimize(bool o) { optimize = o; }
-    bool getOptimize() { return optimize; }
-    void setDebug(bool d) { debug = d; }
-    bool getDebug() { return debug; }
-
-    void setUseEmulatedFunction() { useEmulatedFunction = true; }
-    bool getUseEmulatedFunction() { return useEmulatedFunction; }
-
-protected:
-    TIntermAggregate(const TIntermAggregate&); // disallow copy constructor
-    TIntermAggregate& operator=(const TIntermAggregate&); // disallow assignment operator
-    TIntermSequence sequence;
-    TString name;
-    bool userDefined; // used for user defined function names
-
-    bool optimize;
-    bool debug;
-
-    // If set to true, replace the built-in function call with an emulated one
-    // to work around driver bugs.
-    bool useEmulatedFunction;
-};
-
-//
-// For if tests.  Simplified since there is no switch statement.
-//
-class TIntermSelection : public TIntermTyped {
-public:
-    TIntermSelection(TIntermTyped* cond, TIntermNode* trueB, TIntermNode* falseB) :
-            TIntermTyped(TType(EbtVoid, EbpUndefined)), condition(cond), trueBlock(trueB), falseBlock(falseB) {}
-    TIntermSelection(TIntermTyped* cond, TIntermNode* trueB, TIntermNode* falseB, const TType& type) :
-            TIntermTyped(type), condition(cond), trueBlock(trueB), falseBlock(falseB) {}
-
-    virtual void traverse(TIntermTraverser*);
-    virtual bool replaceChildNode(
-        TIntermNode *original, TIntermNode *replacement);
-
-    // Conservatively assume selections have side-effects
-    virtual bool hasSideEffects() const { return true; }
-
-    bool usesTernaryOperator() const { return getBasicType() != EbtVoid; }
-    TIntermNode* getCondition() const { return condition; }
-    TIntermNode* getTrueBlock() const { return trueBlock; }
-    TIntermNode* getFalseBlock() const { return falseBlock; }
-    TIntermSelection* getAsSelectionNode() { return this; }
-
-protected:
-    TIntermTyped* condition;
-    TIntermNode* trueBlock;
-    TIntermNode* falseBlock;
-};
-
-enum Visit
+struct TVectorFields
 {
-    PreVisit,
-    InVisit,
-    PostVisit
+    int offsets[4];
+    int num;
 };
 
 //
-// For traversing the tree.  User should derive from this, 
-// put their traversal specific data in it, and then pass
-// it to a Traverse method.
-//
-// When using this, just fill in the methods for nodes you want visited.
-// Return false from a pre-visit to skip visiting that node's subtree.
+// Set of helper functions to help parse and build the tree.
 //
-class TIntermTraverser
+class TInfoSink;
+class TIntermediate
 {
-public:
+  public:
     POOL_ALLOCATOR_NEW_DELETE();
-    TIntermTraverser(bool preVisit = true, bool inVisit = false, bool postVisit = false, bool rightToLeft = false) : 
-            preVisit(preVisit),
-            inVisit(inVisit),
-            postVisit(postVisit),
-            rightToLeft(rightToLeft),
-            depth(0),
-            maxDepth(0) {}
-    virtual ~TIntermTraverser() {}
-
-    virtual void visitSymbol(TIntermSymbol*) {}
-    virtual void visitConstantUnion(TIntermConstantUnion*) {}
-    virtual bool visitBinary(Visit visit, TIntermBinary*) {return true;}
-    virtual bool visitUnary(Visit visit, TIntermUnary*) {return true;}
-    virtual bool visitSelection(Visit visit, TIntermSelection*) {return true;}
-    virtual bool visitAggregate(Visit visit, TIntermAggregate*) {return true;}
-    virtual bool visitLoop(Visit visit, TIntermLoop*) {return true;}
-    virtual bool visitBranch(Visit visit, TIntermBranch*) {return true;}
-
-    int getMaxDepth() const {return maxDepth;}
-
-    void incrementDepth(TIntermNode *current)
-    {
-        depth++;
-        maxDepth = std::max(maxDepth, depth);
-        path.push_back(current);
-    }
-
-    void decrementDepth()
-    {
-        depth--;
-        path.pop_back();
-    }
-
-    TIntermNode *getParentNode()
-    {
-        return path.size() == 0 ? NULL : path.back();
-    }
-
-    // Return the original name if hash function pointer is NULL;
-    // otherwise return the hashed name.
-    static TString hash(const TString& name, ShHashFunction64 hashFunction);
-
-    const bool preVisit;
-    const bool inVisit;
-    const bool postVisit;
-    const bool rightToLeft;
-
-protected:
-    int depth;
-    int maxDepth;
-
-    // All the nodes from root to the current node's parent during traversing.
-    TVector<TIntermNode *> path;
-};
-
-#endif // __INTERMEDIATE_H
+    TIntermediate(TInfoSink &i)
+        : mInfoSink(i) { }
+
+    TIntermSymbol *addSymbol(
+        int id, const TString &, const TType &, const TSourceLoc &);
+    TIntermTyped *addBinaryMath(
+        TOperator op, TIntermTyped *left, TIntermTyped *right, const TSourceLoc &);
+    TIntermTyped *addAssign(
+        TOperator op, TIntermTyped *left, TIntermTyped *right, const TSourceLoc &);
+    TIntermTyped *addIndex(
+        TOperator op, TIntermTyped *base, TIntermTyped *index, const TSourceLoc &);
+    TIntermTyped *addUnaryMath(
+        TOperator op, TIntermNode *child, const TSourceLoc &);
+    TIntermAggregate *growAggregate(
+        TIntermNode *left, TIntermNode *right, const TSourceLoc &);
+    TIntermAggregate *makeAggregate(TIntermNode *node, const TSourceLoc &);
+    TIntermAggregate *setAggregateOperator(TIntermNode *, TOperator, const TSourceLoc &);
+    TIntermNode *addSelection(TIntermTyped *cond, TIntermNodePair code, const TSourceLoc &);
+    TIntermTyped *addSelection(
+        TIntermTyped *cond, TIntermTyped *trueBlock, TIntermTyped *falseBlock, const TSourceLoc &);
+    TIntermTyped *addComma(
+        TIntermTyped *left, TIntermTyped *right, const TSourceLoc &);
+    TIntermConstantUnion *addConstantUnion(ConstantUnion *, const TType &, const TSourceLoc &);
+    // TODO(zmo): Get rid of default value.
+    bool parseConstTree(const TSourceLoc &, TIntermNode *, ConstantUnion *,
+                        TOperator, TType, bool singleConstantParam = false);
+    TIntermNode *addLoop(TLoopType, TIntermNode *, TIntermTyped *, TIntermTyped *,
+                         TIntermNode *, const TSourceLoc &);
+    TIntermBranch *addBranch(TOperator, const TSourceLoc &);
+    TIntermBranch *addBranch(TOperator, TIntermTyped *, const TSourceLoc &);
+    TIntermTyped *addSwizzle(TVectorFields &, const TSourceLoc &);
+    bool postProcess(TIntermNode *);
+    void remove(TIntermNode *);
+    void outputTree(TIntermNode *);
+
+  private:
+    void operator=(TIntermediate &); // prevent assignments
+
+    TInfoSink & mInfoSink;
+};
+
+#endif  // COMPILER_TRANSLATOR_LOCAL_INTERMEDIATE_H_
diff --git a/src/3rdparty/angle/src/compiler/preprocessor/length_limits.h b/src/3rdparty/angle/src/compiler/translator/length_limits.h
index 4f1f71319f..df70ee5d84 100644
--- a/src/3rdparty/angle/src/compiler/preprocessor/length_limits.h
+++ b/src/3rdparty/angle/src/compiler/translator/length_limits.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2011 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2011-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,11 +11,11 @@
 #if !defined(__LENGTH_LIMITS_H)
 #define __LENGTH_LIMITS_H 1
 
+#include "GLSLANG/ShaderLang.h"
+
 // These constants are factored out from the rest of the headers to
 // make it easier to reference them from the compiler sources.
 
-// These lengths do not include the NULL terminator.
-#define MAX_SYMBOL_NAME_LEN 256
-#define MAX_STRING_LEN 511
+size_t GetGlobalMaxTokenSize(ShShaderSpec spec);
 
 #endif // !(defined(__LENGTH_LIMITS_H)
diff --git a/src/3rdparty/angle/src/compiler/translator/localintermediate.h b/src/3rdparty/angle/src/compiler/translator/localintermediate.h
deleted file mode 100644
index b582e02f5d..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/localintermediate.h
+++ /dev/null
@@ -1,57 +0,0 @@
-//
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#ifndef _LOCAL_INTERMEDIATE_INCLUDED_
-#define _LOCAL_INTERMEDIATE_INCLUDED_
-
-#include "GLSLANG/ShaderLang.h"
-#include "compiler/translator/intermediate.h"
-#include "compiler/translator/SymbolTable.h"
-
-struct TVectorFields {
-    int offsets[4];
-    int num;
-};
-
-//
-// Set of helper functions to help parse and build the tree.
-//
-class TInfoSink;
-class TIntermediate {
-public:    
-    POOL_ALLOCATOR_NEW_DELETE();
-    TIntermediate(TInfoSink& i) : infoSink(i) { }
-
-    TIntermSymbol* addSymbol(int Id, const TString&, const TType&, const TSourceLoc&);
-    TIntermTyped* addConversion(TOperator, const TType&, TIntermTyped*);
-    TIntermTyped* addBinaryMath(TOperator op, TIntermTyped* left, TIntermTyped* right, const TSourceLoc&, TSymbolTable&);
-    TIntermTyped* addAssign(TOperator op, TIntermTyped* left, TIntermTyped* right, const TSourceLoc&);
-    TIntermTyped* addIndex(TOperator op, TIntermTyped* base, TIntermTyped* index, const TSourceLoc&);
-    TIntermTyped* addUnaryMath(TOperator op, TIntermNode* child, const TSourceLoc&, TSymbolTable&);
-    TIntermAggregate* growAggregate(TIntermNode* left, TIntermNode* right, const TSourceLoc&);
-    TIntermAggregate* makeAggregate(TIntermNode* node, const TSourceLoc&);
-    TIntermAggregate* setAggregateOperator(TIntermNode*, TOperator, const TSourceLoc&);
-    TIntermNode*  addSelection(TIntermTyped* cond, TIntermNodePair code, const TSourceLoc&);
-    TIntermTyped* addSelection(TIntermTyped* cond, TIntermTyped* trueBlock, TIntermTyped* falseBlock, const TSourceLoc&);
-    TIntermTyped* addComma(TIntermTyped* left, TIntermTyped* right, const TSourceLoc&);
-    TIntermConstantUnion* addConstantUnion(ConstantUnion*, const TType&, const TSourceLoc&);
-    TIntermTyped* promoteConstantUnion(TBasicType, TIntermConstantUnion*) ;
-    bool parseConstTree(const TSourceLoc&, TIntermNode*, ConstantUnion*, TOperator, TSymbolTable&, TType, bool singleConstantParam = false);        
-    TIntermNode* addLoop(TLoopType, TIntermNode*, TIntermTyped*, TIntermTyped*, TIntermNode*, const TSourceLoc&);
-    TIntermBranch* addBranch(TOperator, const TSourceLoc&);
-    TIntermBranch* addBranch(TOperator, TIntermTyped*, const TSourceLoc&);
-    TIntermTyped* addSwizzle(TVectorFields&, const TSourceLoc&);
-    bool postProcess(TIntermNode*);
-    void remove(TIntermNode*);
-    void outputTree(TIntermNode*);
-
-private:
-    void operator=(TIntermediate&); // prevent assignments
-
-    TInfoSink& infoSink;
-};
-
-#endif // _LOCAL_INTERMEDIATE_INCLUDED_
diff --git a/src/3rdparty/angle/src/compiler/translator/osinclude.h b/src/3rdparty/angle/src/compiler/translator/osinclude.h
deleted file mode 100644
index cccfa6355c..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/osinclude.h
+++ /dev/null
@@ -1,64 +0,0 @@
-//
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#ifndef __OSINCLUDE_H
-#define __OSINCLUDE_H
-
-//
-// This file contains contains os-specific datatypes and
-// declares any os-specific functions.
-//
-
-#if defined(_WIN32) || defined(_WIN64)
-#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
-#define ANGLE_OS_WINRT
-#else
-#define ANGLE_OS_WIN
-#endif
-#elif defined(__APPLE__) || defined(__linux__) || \
-      defined(__FreeBSD__) || defined(__OpenBSD__) || \
-      defined(__NetBSD__) || defined(__DragonFly__) || \
-      defined(__sun) || defined(ANDROID) || \
-      defined(__GLIBC__) || defined(__GNU__) || \
-      defined(__QNX__)
-#define ANGLE_OS_POSIX
-#else
-#error Unsupported platform.
-#endif
-
-#if defined(ANGLE_OS_WIN) || defined(ANGLE_OS_WINRT)
-#define STRICT
-#define VC_EXTRALEAN 1
-#include <windows.h>
-#elif defined(ANGLE_OS_POSIX)
-#include <pthread.h>
-#include <semaphore.h>
-#include <errno.h>
-#endif  // ANGLE_OS_WIN
-
-
-#include "compiler/translator/compilerdebug.h"
-
-//
-// Thread Local Storage Operations
-//
-#if defined(ANGLE_OS_WIN)
-typedef DWORD OS_TLSIndex;
-#define OS_INVALID_TLS_INDEX (TLS_OUT_OF_INDEXES)
-#elif defined(ANGLE_OS_WINRT)
-typedef size_t OS_TLSIndex;
-#define OS_INVALID_TLS_INDEX ((DWORD)0xFFFFFF)
-#elif defined(ANGLE_OS_POSIX)
-typedef pthread_key_t OS_TLSIndex;
-#define OS_INVALID_TLS_INDEX (static_cast<OS_TLSIndex>(-1))
-#endif  // ANGLE_OS_WIN
-
-OS_TLSIndex OS_AllocTLSIndex();
-void *OS_GetTLSValue(OS_TLSIndex nIndex);
-bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue);
-bool OS_FreeTLSIndex(OS_TLSIndex nIndex);
-
-#endif // __OSINCLUDE_H
diff --git a/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp b/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp
deleted file mode 100644
index d4bba4c70e..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp
+++ /dev/null
@@ -1,72 +0,0 @@
-//
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-//
-// This file contains the posix specific functions
-//
-#include "compiler/translator/osinclude.h"
-
-#if !defined(ANGLE_OS_POSIX)
-#error Trying to build a posix specific file in a non-posix build.
-#endif
-
-//
-// Thread Local Storage Operations
-//
-OS_TLSIndex OS_AllocTLSIndex()
-{
-    pthread_key_t pPoolIndex;
-
-    //
-    // Create global pool key.
-    //
-    if ((pthread_key_create(&pPoolIndex, NULL)) != 0) {
-        assert(0 && "OS_AllocTLSIndex(): Unable to allocate Thread Local Storage");
-        return false;
-    }
-    else {
-        return pPoolIndex;
-    }
-}
-
-
-void *OS_GetTLSValue(OS_TLSIndex nIndex)
-{
-    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
-
-    return pthread_getspecific(nIndex);
-}
-
-
-bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue)
-{
-    if (nIndex == OS_INVALID_TLS_INDEX) {
-        assert(0 && "OS_SetTLSValue(): Invalid TLS Index");
-        return false;
-    }
-
-    if (pthread_setspecific(nIndex, lpvValue) == 0)
-        return true;
-    else
-        return false;
-}
-
-
-bool OS_FreeTLSIndex(OS_TLSIndex nIndex)
-{
-    if (nIndex == OS_INVALID_TLS_INDEX) {
-        assert(0 && "OS_SetTLSValue(): Invalid TLS Index");
-        return false;
-    }
-
-    //
-    // Delete the global pool key.
-    //
-    if (pthread_key_delete(nIndex) == 0)
-        return true;
-    else
-        return false;
-}
diff --git a/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp b/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp
deleted file mode 100644
index abd8bc7833..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp
+++ /dev/null
@@ -1,65 +0,0 @@
-//
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#include "compiler/translator/osinclude.h"
-//
-// This file contains contains the window's specific functions
-//
-
-#if !defined(ANGLE_OS_WIN)
-#error Trying to build a windows specific file in a non windows build.
-#endif
-
-
-//
-// Thread Local Storage Operations
-//
-OS_TLSIndex OS_AllocTLSIndex()
-{
-	DWORD dwIndex = TlsAlloc();
-	if (dwIndex == TLS_OUT_OF_INDEXES) {
-		assert(0 && "OS_AllocTLSIndex(): Unable to allocate Thread Local Storage");
-		return OS_INVALID_TLS_INDEX;
-	}
-
-	return dwIndex;
-}
-
-
-void *OS_GetTLSValue(OS_TLSIndex nIndex)
-{
-    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
-
-    return TlsGetValue(nIndex);
-}
-
-
-bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue)
-{
-	if (nIndex == OS_INVALID_TLS_INDEX) {
-		assert(0 && "OS_SetTLSValue(): Invalid TLS Index");
-		return false;
-	}
-
-	if (TlsSetValue(nIndex, lpvValue))
-		return true;
-	else
-		return false;
-}
-
-
-bool OS_FreeTLSIndex(OS_TLSIndex nIndex)
-{
-	if (nIndex == OS_INVALID_TLS_INDEX) {
-		assert(0 && "OS_SetTLSValue(): Invalid TLS Index");
-		return false;
-	}
-
-	if (TlsFree(nIndex))
-		return true;
-	else
-		return false;
-}
diff --git a/src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp b/src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp
deleted file mode 100644
index bb061ca85d..0000000000
--- a/src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp
+++ /dev/null
@@ -1,75 +0,0 @@
-//
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-#include "compiler/translator/osinclude.h"
-//
-// This file contains contains Windows Runtime specific functions
-//
-
-#if !defined(ANGLE_OS_WINRT)
-#error Trying to build a WinRT specific file in a non-WinRT build.
-#endif
-
-#include <vector>
-
-
-//
-// Thread Local Storage Operations
-//
-__declspec(thread) std::vector<void *> *tls = nullptr;
-__declspec(thread) std::vector<OS_TLSIndex> *freeIndices = nullptr;
-
-OS_TLSIndex OS_AllocTLSIndex()
-{
-    if (!tls)
-        tls = new std::vector<void*>;
-
-    if (freeIndices && !freeIndices->empty()) {
-        OS_TLSIndex index = freeIndices->back();
-        freeIndices->pop_back();
-        return index;
-    } else {
-        tls->push_back(nullptr);
-        return tls->size() - 1;
-    }
-}
-
-
-void *OS_GetTLSValue(OS_TLSIndex nIndex)
-{
-    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
-    ASSERT(tls);
-
-    return tls->at(nIndex);
-}
-
-
-bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue)
-{
-    if (!tls || nIndex >= tls->size() || nIndex == OS_INVALID_TLS_INDEX) {
-        ASSERT(0 && "OS_SetTLSValue(): Invalid TLS Index");
-        return false;
-    }
-
-    tls->at(nIndex) = lpvValue;
-    return true;
-}
-
-
-bool OS_FreeTLSIndex(OS_TLSIndex nIndex)
-{
-    if (!tls || nIndex >= tls->size() || nIndex == OS_INVALID_TLS_INDEX) {
-        ASSERT(0 && "OS_SetTLSValue(): Invalid TLS Index");
-        return false;
-    }
-
-    if (!freeIndices)
-        freeIndices = new std::vector<OS_TLSIndex>;
-
-    freeIndices->push_back(nIndex);
-
-    return true;
-}
diff --git a/src/3rdparty/angle/src/compiler/translator/parseConst.cpp b/src/3rdparty/angle/src/compiler/translator/parseConst.cpp
index a59f0be9d8..1897ed151c 100644
--- a/src/3rdparty/angle/src/compiler/translator/parseConst.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/parseConst.cpp
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -7,47 +7,50 @@
 #include "compiler/translator/ParseContext.h"
 
 //
-// Use this class to carry along data from node to node in 
+// Use this class to carry along data from node to node in
 // the traversal
 //
-class TConstTraverser : public TIntermTraverser {
-public:
-    TConstTraverser(ConstantUnion* cUnion, bool singleConstParam, TOperator constructType, TInfoSink& sink, TSymbolTable& symTable, TType& t)
+class TConstTraverser : public TIntermTraverser
+{
+  public:
+    TConstTraverser(ConstantUnion *cUnion, bool singleConstParam,
+                    TOperator constructType, TInfoSink &sink, TType &t)
         : error(false),
-          index(0),
-          unionArray(cUnion),
-          type(t),
-          constructorType(constructType),
-          singleConstantParam(singleConstParam),
-          infoSink(sink),
-          symbolTable(symTable),
-          size(0),
-          isMatrix(false),
-          matrixSize(0) {
+          mIndex(0),
+          mUnionArray(cUnion),
+          mType(t),
+          mConstructorType(constructType),
+          mSingleConstantParam(singleConstParam),
+          mInfoSink(sink),
+          mSize(0),
+          mIsDiagonalMatrixInit(false),
+          mMatrixCols(0),
+          mMatrixRows(0)
+    {
     }
 
     bool error;
 
-protected:
-    void visitSymbol(TIntermSymbol*);
-    void visitConstantUnion(TIntermConstantUnion*);
-    bool visitBinary(Visit visit, TIntermBinary*);
-    bool visitUnary(Visit visit, TIntermUnary*);
-    bool visitSelection(Visit visit, TIntermSelection*);
-    bool visitAggregate(Visit visit, TIntermAggregate*);
-    bool visitLoop(Visit visit, TIntermLoop*);
-    bool visitBranch(Visit visit, TIntermBranch*);
-
-    size_t index;
-    ConstantUnion *unionArray;
-    TType type;
-    TOperator constructorType;
-    bool singleConstantParam;
-    TInfoSink& infoSink;
-    TSymbolTable& symbolTable;
-    size_t size; // size of the constructor ( 4 for vec4)
-    bool isMatrix;
-    size_t matrixSize; // dimension of the matrix (nominal size and not the instance size)
+  protected:
+    void visitSymbol(TIntermSymbol *);
+    void visitConstantUnion(TIntermConstantUnion *);
+    bool visitBinary(Visit visit, TIntermBinary *);
+    bool visitUnary(Visit visit, TIntermUnary *);
+    bool visitSelection(Visit visit, TIntermSelection *);
+    bool visitAggregate(Visit visit, TIntermAggregate *);
+    bool visitLoop(Visit visit, TIntermLoop *);
+    bool visitBranch(Visit visit, TIntermBranch *);
+
+    size_t mIndex;
+    ConstantUnion *mUnionArray;
+    TType mType;
+    TOperator mConstructorType;
+    bool mSingleConstantParam;
+    TInfoSink &mInfoSink;
+    size_t mSize; // size of the constructor ( 4 for vec4)
+    bool mIsDiagonalMatrixInit;
+    int mMatrixCols; // columns of the matrix
+    int mMatrixRows; // rows of the matrix
 };
 
 //
@@ -58,169 +61,182 @@ protected:
 // continue on to children.  If you process children yourself,
 // return false.
 //
-
-void TConstTraverser::visitSymbol(TIntermSymbol* node)
+void TConstTraverser::visitSymbol(TIntermSymbol *node)
 {
-    infoSink.info.message(EPrefixInternalError, node->getLine(), "Symbol Node found in constant constructor");
+    mInfoSink.info.message(EPrefixInternalError, node->getLine(),
+                           "Symbol Node found in constant constructor");
     return;
-
 }
 
-bool TConstTraverser::visitBinary(Visit visit, TIntermBinary* node)
+bool TConstTraverser::visitBinary(Visit visit, TIntermBinary *node)
 {
     TQualifier qualifier = node->getType().getQualifier();
-    
-    if (qualifier != EvqConst) {
+
+    if (qualifier != EvqConst)
+    {
         TString buf;
         buf.append("'constructor' : assigning non-constant to ");
-        buf.append(type.getCompleteString());
-        infoSink.info.message(EPrefixError, node->getLine(), buf.c_str());
+        buf.append(mType.getCompleteString());
+        mInfoSink.info.message(EPrefixError, node->getLine(), buf.c_str());
         error = true;
-        return false;  
+        return false;
     }
 
-   infoSink.info.message(EPrefixInternalError, node->getLine(), "Binary Node found in constant constructor");
-    
+    mInfoSink.info.message(EPrefixInternalError, node->getLine(),
+                           "Binary Node found in constant constructor");
     return false;
 }
 
-bool TConstTraverser::visitUnary(Visit visit, TIntermUnary* node)
+bool TConstTraverser::visitUnary(Visit visit, TIntermUnary *node)
 {
     TString buf;
     buf.append("'constructor' : assigning non-constant to ");
-    buf.append(type.getCompleteString());
-    infoSink.info.message(EPrefixError, node->getLine(), buf.c_str());
+    buf.append(mType.getCompleteString());
+    mInfoSink.info.message(EPrefixError, node->getLine(), buf.c_str());
     error = true;
-    return false;  
+    return false;
 }
 
-bool TConstTraverser::visitAggregate(Visit visit, TIntermAggregate* node)
+bool TConstTraverser::visitAggregate(Visit visit, TIntermAggregate *node)
 {
-    if (!node->isConstructor() && node->getOp() != EOpComma) {
+    if (!node->isConstructor() && node->getOp() != EOpComma)
+    {
         TString buf;
         buf.append("'constructor' : assigning non-constant to ");
-        buf.append(type.getCompleteString());
-        infoSink.info.message(EPrefixError, node->getLine(), buf.c_str());
+        buf.append(mType.getCompleteString());
+        mInfoSink.info.message(EPrefixError, node->getLine(), buf.c_str());
         error = true;
-        return false;  
+        return false;
     }
 
-    if (node->getSequence().size() == 0) {
+    if (node->getSequence()->size() == 0)
+    {
         error = true;
         return false;
     }
 
-    bool flag = node->getSequence().size() == 1 && node->getSequence()[0]->getAsTyped()->getAsConstantUnion();
-    if (flag) 
+    bool flag = node->getSequence()->size() == 1 &&
+                (*node->getSequence())[0]->getAsTyped()->getAsConstantUnion();
+    if (flag)
     {
-        singleConstantParam = true; 
-        constructorType = node->getOp();
-        size = node->getType().getObjectSize();
-
-        if (node->getType().isMatrix()) {
-            isMatrix = true;
-            matrixSize = node->getType().getNominalSize();
+        mSingleConstantParam = true;
+        mConstructorType = node->getOp();
+        mSize = node->getType().getObjectSize();
+
+        if (node->getType().isMatrix())
+        {
+            mIsDiagonalMatrixInit = true;
+            mMatrixCols = node->getType().getCols();
+            mMatrixRows = node->getType().getRows();
         }
-    }       
-
-    for (TIntermSequence::iterator p = node->getSequence().begin(); 
-                                   p != node->getSequence().end(); p++) {
+    }
 
+    for (TIntermSequence::iterator p = node->getSequence()->begin();
+         p != node->getSequence()->end(); p++)
+    {
         if (node->getOp() == EOpComma)
-            index = 0;           
-
+            mIndex = 0;
         (*p)->traverse(this);
-    }   
-    if (flag) 
+    }
+    if (flag)
     {
-        singleConstantParam = false;   
-        constructorType = EOpNull;
-        size = 0;
-        isMatrix = false;
-        matrixSize = 0;
+        mSingleConstantParam = false;
+        mConstructorType = EOpNull;
+        mSize = 0;
+        mIsDiagonalMatrixInit = false;
+        mMatrixCols = 0;
+        mMatrixRows = 0;
     }
     return false;
 }
 
-bool TConstTraverser::visitSelection(Visit visit, TIntermSelection* node)
+bool TConstTraverser::visitSelection(Visit visit, TIntermSelection *node)
 {
-    infoSink.info.message(EPrefixInternalError, node->getLine(), "Selection Node found in constant constructor");
+    mInfoSink.info.message(EPrefixInternalError, node->getLine(),
+                           "Selection Node found in constant constructor");
     error = true;
     return false;
 }
 
-void TConstTraverser::visitConstantUnion(TIntermConstantUnion* node)
+void TConstTraverser::visitConstantUnion(TIntermConstantUnion *node)
 {
     if (!node->getUnionArrayPointer())
     {
         // The constant was not initialized, this should already have been logged
-        assert(infoSink.info.size() != 0);
+        ASSERT(mInfoSink.info.size() != 0);
         return;
     }
 
-    ConstantUnion* leftUnionArray = unionArray;
-    size_t instanceSize = type.getObjectSize();
+    ConstantUnion *leftUnionArray = mUnionArray;
+    size_t instanceSize = mType.getObjectSize();
+    TBasicType basicType = mType.getBasicType();
 
-    if (index >= instanceSize)
+    if (mIndex >= instanceSize)
         return;
 
-    if (!singleConstantParam) {
-        size_t size = node->getType().getObjectSize();
-    
+    if (!mSingleConstantParam)
+    {
+        size_t objectSize = node->getType().getObjectSize();
         ConstantUnion *rightUnionArray = node->getUnionArrayPointer();
-        for (size_t i = 0; i < size; i++) {
-            if (index >= instanceSize)
+        for (size_t i=0; i < objectSize; i++)
+        {
+            if (mIndex >= instanceSize)
                 return;
-            leftUnionArray[index] = rightUnionArray[i];
-
-            (index)++;
+            leftUnionArray[mIndex].cast(basicType, rightUnionArray[i]);
+            mIndex++;
         }
-    } else {
-        size_t totalSize = index + size;
+    }
+    else
+    {
+        size_t totalSize = mIndex + mSize;
         ConstantUnion *rightUnionArray = node->getUnionArrayPointer();
-        if (!isMatrix) {
-            size_t count = 0;
-            for (size_t i = index; i < totalSize; i++) {
+        if (!mIsDiagonalMatrixInit)
+        {
+            int count = 0;
+            for (size_t i = mIndex; i < totalSize; i++)
+            {
                 if (i >= instanceSize)
                     return;
-
-                leftUnionArray[i] = rightUnionArray[count];
-
-                (index)++;
-                
+                leftUnionArray[i].cast(basicType, rightUnionArray[count]);
+                mIndex++;
                 if (node->getType().getObjectSize() > 1)
                     count++;
             }
-        } else {  // for matrix constructors
-            size_t count = 0;
-            size_t element = index;
-            for (size_t i = index; i < totalSize; i++) {
-                if (i >= instanceSize)
-                    return;
-                if (element - i == 0 || (i - element) % (matrixSize + 1) == 0 )
-                    leftUnionArray[i] = rightUnionArray[count];
-                else 
-                    leftUnionArray[i].setFConst(0.0f);
-
-                (index)++;
-
-                if (node->getType().getObjectSize() > 1)
-                    count++;                
+        }
+        else
+        {
+            // for matrix diagonal constructors from a single scalar
+            for (int i = 0, col = 0; col < mMatrixCols; col++)
+            {
+                for (int row = 0; row < mMatrixRows; row++, i++)
+                {
+                    if (col == row)
+                    {
+                        leftUnionArray[i].cast(basicType, rightUnionArray[0]);
+                    }
+                    else
+                    {
+                        leftUnionArray[i].setFConst(0.0f);
+                    }
+                    mIndex++;
+                }
             }
         }
     }
 }
 
-bool TConstTraverser::visitLoop(Visit visit, TIntermLoop* node)
+bool TConstTraverser::visitLoop(Visit visit, TIntermLoop *node)
 {
-    infoSink.info.message(EPrefixInternalError, node->getLine(), "Loop Node found in constant constructor");
+    mInfoSink.info.message(EPrefixInternalError, node->getLine(),
+                           "Loop Node found in constant constructor");
     error = true;
     return false;
 }
 
-bool TConstTraverser::visitBranch(Visit visit, TIntermBranch* node)
+bool TConstTraverser::visitBranch(Visit visit, TIntermBranch *node)
 {
-    infoSink.info.message(EPrefixInternalError, node->getLine(), "Branch Node found in constant constructor");
+    mInfoSink.info.message(EPrefixInternalError, node->getLine(),
+                           "Branch Node found in constant constructor");
     error = true;
     return false;
 }
@@ -230,12 +246,15 @@ bool TConstTraverser::visitBranch(Visit visit, TIntermBranch* node)
 // Individual functions can be initialized to 0 to skip processing of that
 // type of node.  It's children will still be processed.
 //
-bool TIntermediate::parseConstTree(const TSourceLoc& line, TIntermNode* root, ConstantUnion* unionArray, TOperator constructorType, TSymbolTable& symbolTable, TType t, bool singleConstantParam)
+bool TIntermediate::parseConstTree(
+    const TSourceLoc &line, TIntermNode *root, ConstantUnion *unionArray,
+    TOperator constructorType, TType t, bool singleConstantParam)
 {
     if (root == 0)
         return false;
 
-    TConstTraverser it(unionArray, singleConstantParam, constructorType, infoSink, symbolTable, t);
+    TConstTraverser it(unionArray, singleConstantParam, constructorType,
+                       mInfoSink, t);
 
     root->traverse(&it);
     if (it.error)
diff --git a/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.cpp b/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.cpp
index a9f3f49ef3..48d44c72d1 100644
--- a/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.cpp
@@ -31,6 +31,15 @@ RestrictFragmentShaderTiming::RestrictFragmentShaderTiming(TInfoSinkBase& sink)
     mSamplingOps.insert("texture2DRect(1;vf2;");
     mSamplingOps.insert("texture2DRectProj(1;vf3;");
     mSamplingOps.insert("texture2DRectProj(1;vf4;");
+    // Sampling ops provided by EXT_shader_texture_lod.
+    mSamplingOps.insert("texture2DLodEXT(1;vf2;f1;");
+    mSamplingOps.insert("texture2DProjLodEXT(1;vf3;f1;");
+    mSamplingOps.insert("texture2DProjLodEXT(1;vf4;f1;");
+    mSamplingOps.insert("textureCubeLodEXT(1;vf4;f1;");
+    mSamplingOps.insert("texture2DGradEXT(1;vf2;vf2;vf2;");
+    mSamplingOps.insert("texture2DProjGradEXT(1;vf3;vf2;vf2;");
+    mSamplingOps.insert("texture2DProjGradEXT(1;vf4;vf2;vf2;");
+    mSamplingOps.insert("textureCubeGradEXT(1;vf3;vf3;vf3;");
 }
 
 // FIXME(mvujovic): We do not know if the execution time of built-in operations like sin, pow, etc.
diff --git a/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.h b/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.h
index 323cb62d8a..80d5f7fa7f 100644
--- a/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.h
+++ b/src/3rdparty/angle/src/compiler/translator/timing/RestrictFragmentShaderTiming.h
@@ -7,9 +7,7 @@
 #ifndef COMPILER_TIMING_RESTRICT_FRAGMENT_SHADER_TIMING_H_
 #define COMPILER_TIMING_RESTRICT_FRAGMENT_SHADER_TIMING_H_
 
-#include "GLSLANG/ShaderLang.h"
-
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/depgraph/DependencyGraph.h"
 
 class TInfoSinkBase;
diff --git a/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.cpp b/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.cpp
index ee78c35450..7c1208a298 100644
--- a/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.cpp
@@ -12,6 +12,6 @@ void RestrictVertexShaderTiming::visitSymbol(TIntermSymbol* node)
         ++mNumErrors;
         mSink.message(EPrefixError,
                       node->getLine(),
-                      "Samplers are not permitted in vertex shaders");
+                      "Samplers are not permitted in vertex shaders.\n");
     }
 }
diff --git a/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.h b/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.h
index 5f0dd3197a..a6263567b4 100644
--- a/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.h
+++ b/src/3rdparty/angle/src/compiler/translator/timing/RestrictVertexShaderTiming.h
@@ -7,9 +7,7 @@
 #ifndef COMPILER_TIMING_RESTRICT_VERTEX_SHADER_TIMING_H_
 #define COMPILER_TIMING_RESTRICT_VERTEX_SHADER_TIMING_H_
 
-#include "GLSLANG/ShaderLang.h"
-
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 #include "compiler/translator/InfoSink.h"
 
 class TInfoSinkBase;
diff --git a/src/3rdparty/angle/src/compiler/translator/util.cpp b/src/3rdparty/angle/src/compiler/translator/util.cpp
index 077bdcc48b..f74c7d1173 100644
--- a/src/3rdparty/angle/src/compiler/translator/util.cpp
+++ b/src/3rdparty/angle/src/compiler/translator/util.cpp
@@ -9,6 +9,7 @@
 #include <limits>
 
 #include "compiler/preprocessor/numeric_lex.h"
+#include "common/utilities.h"
 
 bool atof_clamp(const char *str, float *value)
 {
@@ -26,3 +27,297 @@ bool atoi_clamp(const char *str, int *value)
     return success;
 }
 
+namespace sh
+{
+
+GLenum GLVariableType(const TType &type)
+{
+    if (type.getBasicType() == EbtFloat)
+    {
+        if (type.isScalar())
+        {
+            return GL_FLOAT;
+        }
+        else if (type.isVector())
+        {
+            switch (type.getNominalSize())
+            {
+              case 2: return GL_FLOAT_VEC2;
+              case 3: return GL_FLOAT_VEC3;
+              case 4: return GL_FLOAT_VEC4;
+              default: UNREACHABLE();
+            }
+        }
+        else if (type.isMatrix())
+        {
+            switch (type.getCols())
+            {
+              case 2:
+                switch (type.getRows())
+                {
+                  case 2: return GL_FLOAT_MAT2;
+                  case 3: return GL_FLOAT_MAT2x3;
+                  case 4: return GL_FLOAT_MAT2x4;
+                  default: UNREACHABLE();
+                }
+
+              case 3:
+                switch (type.getRows())
+                {
+                  case 2: return GL_FLOAT_MAT3x2;
+                  case 3: return GL_FLOAT_MAT3;
+                  case 4: return GL_FLOAT_MAT3x4;
+                  default: UNREACHABLE();
+                }
+
+              case 4:
+                switch (type.getRows())
+                {
+                  case 2: return GL_FLOAT_MAT4x2;
+                  case 3: return GL_FLOAT_MAT4x3;
+                  case 4: return GL_FLOAT_MAT4;
+                  default: UNREACHABLE();
+                }
+
+              default: UNREACHABLE();
+            }
+        }
+        else UNREACHABLE();
+    }
+    else if (type.getBasicType() == EbtInt)
+    {
+        if (type.isScalar())
+        {
+            return GL_INT;
+        }
+        else if (type.isVector())
+        {
+            switch (type.getNominalSize())
+            {
+              case 2: return GL_INT_VEC2;
+              case 3: return GL_INT_VEC3;
+              case 4: return GL_INT_VEC4;
+              default: UNREACHABLE();
+            }
+        }
+        else UNREACHABLE();
+    }
+    else if (type.getBasicType() == EbtUInt)
+    {
+        if (type.isScalar())
+        {
+            return GL_UNSIGNED_INT;
+        }
+        else if (type.isVector())
+        {
+            switch (type.getNominalSize())
+            {
+              case 2: return GL_UNSIGNED_INT_VEC2;
+              case 3: return GL_UNSIGNED_INT_VEC3;
+              case 4: return GL_UNSIGNED_INT_VEC4;
+              default: UNREACHABLE();
+            }
+        }
+        else UNREACHABLE();
+    }
+    else if (type.getBasicType() == EbtBool)
+    {
+        if (type.isScalar())
+        {
+            return GL_BOOL;
+        }
+        else if (type.isVector())
+        {
+            switch (type.getNominalSize())
+            {
+              case 2: return GL_BOOL_VEC2;
+              case 3: return GL_BOOL_VEC3;
+              case 4: return GL_BOOL_VEC4;
+              default: UNREACHABLE();
+            }
+        }
+        else UNREACHABLE();
+    }
+
+    switch (type.getBasicType())
+    {
+      case EbtSampler2D:            return GL_SAMPLER_2D;
+      case EbtSampler3D:            return GL_SAMPLER_3D;
+      case EbtSamplerCube:          return GL_SAMPLER_CUBE;
+      case EbtSamplerExternalOES:   return GL_SAMPLER_EXTERNAL_OES;
+      case EbtSampler2DRect:        return GL_SAMPLER_2D_RECT_ARB;
+      case EbtSampler2DArray:       return GL_SAMPLER_2D_ARRAY;
+      case EbtISampler2D:           return GL_INT_SAMPLER_2D;
+      case EbtISampler3D:           return GL_INT_SAMPLER_3D;
+      case EbtISamplerCube:         return GL_INT_SAMPLER_CUBE;
+      case EbtISampler2DArray:      return GL_INT_SAMPLER_2D_ARRAY;
+      case EbtUSampler2D:           return GL_UNSIGNED_INT_SAMPLER_2D;
+      case EbtUSampler3D:           return GL_UNSIGNED_INT_SAMPLER_3D;
+      case EbtUSamplerCube:         return GL_UNSIGNED_INT_SAMPLER_CUBE;
+      case EbtUSampler2DArray:      return GL_UNSIGNED_INT_SAMPLER_2D_ARRAY;
+      case EbtSampler2DShadow:      return GL_SAMPLER_2D_SHADOW;
+      case EbtSamplerCubeShadow:    return GL_SAMPLER_CUBE_SHADOW;
+      case EbtSampler2DArrayShadow: return GL_SAMPLER_2D_ARRAY_SHADOW;
+      default: UNREACHABLE();
+    }
+
+    return GL_NONE;
+}
+
+GLenum GLVariablePrecision(const TType &type)
+{
+    if (type.getBasicType() == EbtFloat)
+    {
+        switch (type.getPrecision())
+        {
+          case EbpHigh:
+            return GL_HIGH_FLOAT;
+          case EbpMedium:
+            return GL_MEDIUM_FLOAT;
+          case EbpLow:
+            return GL_LOW_FLOAT;
+          case EbpUndefined:
+          // Should be defined as the default precision by the parser
+          default:
+            UNREACHABLE();
+        }
+    }
+    else if (type.getBasicType() == EbtInt || type.getBasicType() == EbtUInt)
+    {
+        switch (type.getPrecision())
+        {
+          case EbpHigh:
+            return GL_HIGH_INT;
+          case EbpMedium:
+            return GL_MEDIUM_INT;
+          case EbpLow:
+            return GL_LOW_INT;
+          case EbpUndefined:
+          // Should be defined as the default precision by the parser
+          default:
+            UNREACHABLE();
+        }
+    }
+
+    // Other types (boolean, sampler) don't have a precision
+    return GL_NONE;
+}
+
+TString ArrayString(const TType &type)
+{
+    if (!type.isArray())
+    {
+        return "";
+    }
+
+    return "[" + str(type.getArraySize()) + "]";
+}
+
+bool IsVaryingOut(TQualifier qualifier)
+{
+    switch (qualifier)
+    {
+      case EvqVaryingOut:
+      case EvqInvariantVaryingOut:
+      case EvqSmoothOut:
+      case EvqFlatOut:
+      case EvqCentroidOut:
+      case EvqVertexOut:
+        return true;
+
+      default: break;
+    }
+
+    return false;
+}
+
+bool IsVaryingIn(TQualifier qualifier)
+{
+    switch (qualifier)
+    {
+      case EvqVaryingIn:
+      case EvqInvariantVaryingIn:
+      case EvqSmoothIn:
+      case EvqFlatIn:
+      case EvqCentroidIn:
+      case EvqFragmentIn:
+        return true;
+
+      default: break;
+    }
+
+    return false;
+}
+
+bool IsVarying(TQualifier qualifier)
+{
+    return IsVaryingIn(qualifier) || IsVaryingOut(qualifier);
+}
+
+InterpolationType GetInterpolationType(TQualifier qualifier)
+{
+    switch (qualifier)
+    {
+      case EvqFlatIn:
+      case EvqFlatOut:
+        return INTERPOLATION_FLAT;
+
+      case EvqSmoothIn:
+      case EvqSmoothOut:
+      case EvqVertexOut:
+      case EvqFragmentIn:
+      case EvqVaryingIn:
+      case EvqVaryingOut:
+      case EvqInvariantVaryingIn:
+      case EvqInvariantVaryingOut:
+        return INTERPOLATION_SMOOTH;
+
+      case EvqCentroidIn:
+      case EvqCentroidOut:
+        return INTERPOLATION_CENTROID;
+
+      default: UNREACHABLE();
+        return INTERPOLATION_SMOOTH;
+    }
+}
+
+template <typename VarT>
+void GetVariableTraverser::traverse(const TType &type, const TString &name, std::vector<VarT> *output)
+{
+    const TStructure *structure = type.getStruct();
+
+    VarT variable;
+    variable.name = name.c_str();
+    variable.arraySize = static_cast<unsigned int>(type.getArraySize());
+
+    if (!structure)
+    {
+        variable.type = GLVariableType(type);
+        variable.precision = GLVariablePrecision(type);
+    }
+    else
+    {
+        // Note: this enum value is not exposed outside ANGLE
+        variable.type = GL_STRUCT_ANGLEX;
+        variable.structName = structure->name().c_str();
+
+        const TFieldList &fields = structure->fields();
+
+        for (size_t fieldIndex = 0; fieldIndex < fields.size(); fieldIndex++)
+        {
+            TField *field = fields[fieldIndex];
+            traverse(*field->type(), field->name(), &variable.fields);
+        }
+    }
+
+    visitVariable(&variable);
+
+    ASSERT(output);
+    output->push_back(variable);
+}
+
+template void GetVariableTraverser::traverse(const TType &, const TString &, std::vector<Uniform> *);
+template void GetVariableTraverser::traverse(const TType &, const TString &, std::vector<Varying> *);
+template void GetVariableTraverser::traverse(const TType &, const TString &, std::vector<InterfaceBlockField> *);
+
+}
diff --git a/src/3rdparty/angle/src/compiler/translator/util.h b/src/3rdparty/angle/src/compiler/translator/util.h
index dc69f39060..241e2cc1c2 100644
--- a/src/3rdparty/angle/src/compiler/translator/util.h
+++ b/src/3rdparty/angle/src/compiler/translator/util.h
@@ -7,6 +7,13 @@
 #ifndef COMPILER_UTIL_H
 #define COMPILER_UTIL_H
 
+#include <stack>
+
+#include "angle_gl.h"
+#include <GLSLANG/ShaderLang.h>
+
+#include "compiler/translator/Types.h"
+
 // atof_clamp is like atof but
 //   1. it forces C locale, i.e. forcing '.' as decimal point.
 //   2. it clamps the value to -FLT_MAX or FLT_MAX if overflow happens.
@@ -17,4 +24,33 @@ extern bool atof_clamp(const char *str, float *value);
 // Return false if overflow happens.
 extern bool atoi_clamp(const char *str, int *value);
 
+namespace sh
+{
+
+GLenum GLVariableType(const TType &type);
+GLenum GLVariablePrecision(const TType &type);
+bool IsVaryingIn(TQualifier qualifier);
+bool IsVaryingOut(TQualifier qualifier);
+bool IsVarying(TQualifier qualifier);
+InterpolationType GetInterpolationType(TQualifier qualifier);
+TString ArrayString(const TType &type);
+
+class GetVariableTraverser
+{
+  public:
+    GetVariableTraverser() {}
+
+    template <typename VarT>
+    void traverse(const TType &type, const TString &name, std::vector<VarT> *output);
+
+  protected:
+    // May be overloaded
+    virtual void visitVariable(ShaderVariable *newVar) {}
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(GetVariableTraverser);
+};
+
+}
+
 #endif // COMPILER_UTIL_H
diff --git a/src/3rdparty/angle/src/libEGL/Config.cpp b/src/3rdparty/angle/src/libEGL/Config.cpp
index 5488cb6f4f..fdc41a95f0 100644
--- a/src/3rdparty/angle/src/libEGL/Config.cpp
+++ b/src/3rdparty/angle/src/libEGL/Config.cpp
@@ -13,8 +13,8 @@
 #include <algorithm>
 #include <vector>
 
-#include <GLES2/gl2.h>
-#include <GLES2/gl2ext.h>
+#include "angle_gl.h"
+#include <EGL/eglext.h>
 
 #include "common/debug.h"
 
@@ -36,6 +36,13 @@ Config::Config(rx::ConfigDesc desc, EGLint minInterval, EGLint maxInterval, EGLi
         mBlueSize = 5;
         mAlphaSize = 1;
         break;
+      case GL_BGR5_A1_ANGLEX:
+        mBufferSize = 16;
+        mRedSize = 5;
+        mGreenSize = 5;
+        mBlueSize = 5;
+        mAlphaSize = 1;
+        break;
       case GL_RGBA8_OES:
         mBufferSize = 32;
         mRedSize = 8;
@@ -122,6 +129,12 @@ Config::Config(rx::ConfigDesc desc, EGLint minInterval, EGLint maxInterval, EGLi
     mTransparentRedValue = 0;
     mTransparentGreenValue = 0;
     mTransparentBlueValue = 0;
+
+    if (desc.es3Capable)
+    {
+        mRenderableType |= EGL_OPENGL_ES3_BIT_KHR;
+        mConformant |= EGL_OPENGL_ES3_BIT_KHR;
+    }
 }
 
 EGLConfig Config::getHandle() const
diff --git a/src/3rdparty/angle/src/libEGL/Config.h b/src/3rdparty/angle/src/libEGL/Config.h
index 680337b700..98441142f4 100644
--- a/src/3rdparty/angle/src/libEGL/Config.h
+++ b/src/3rdparty/angle/src/libEGL/Config.h
@@ -11,7 +11,6 @@
 #ifndef INCLUDE_CONFIG_H_
 #define INCLUDE_CONFIG_H_
 
-#define EGLAPI
 #include <EGL/egl.h>
 
 #include <set>
diff --git a/src/3rdparty/angle/src/libEGL/Display.cpp b/src/3rdparty/angle/src/libEGL/Display.cpp
index e75a4b6440..5a50e4baf5 100644
--- a/src/3rdparty/angle/src/libEGL/Display.cpp
+++ b/src/3rdparty/angle/src/libEGL/Display.cpp
@@ -1,6 +1,5 @@
-#include "../libGLESv2/precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -14,9 +13,11 @@
 #include <algorithm>
 #include <map>
 #include <vector>
+#include <sstream>
+#include <iterator>
 
 #include "common/debug.h"
-#include "libGLESv2/mathutil.h"
+#include "common/mathutil.h"
 #include "libGLESv2/main.h"
 #include "libGLESv2/Context.h"
 #include "libGLESv2/renderer/SwapChain.h"
@@ -26,43 +27,57 @@
 
 namespace egl
 {
-namespace
+
+typedef std::map<EGLNativeDisplayType, Display*> DisplayMap;
+static DisplayMap *GetDisplayMap()
 {
-    typedef std::map<EGLNativeDisplayType, Display*> DisplayMap; 
-    DisplayMap displays;
+    static DisplayMap displays;
+    return &displays;
 }
 
-egl::Display *Display::getDisplay(EGLNativeDisplayType displayId)
+egl::Display *Display::getDisplay(EGLNativeDisplayType displayId, EGLint displayType)
 {
-    if (displays.find(displayId) != displays.end())
+    DisplayMap *displays = GetDisplayMap();
+    DisplayMap::const_iterator iter = displays->find(displayId);
+    if (iter != displays->end())
     {
-        return displays[displayId];
+        return iter->second;
     }
-
+    
     // FIXME: Check if displayId is a valid display device context
 
-    egl::Display *display = new egl::Display(displayId);
+    egl::Display *display = new egl::Display(displayId, displayType);
+    displays->insert(std::make_pair(displayId, display));
 
-    displays[displayId] = display;
     return display;
 }
 
-Display::Display(EGLNativeDisplayType displayId)
+Display::Display(EGLNativeDisplayType displayId, EGLint displayType)
+    : mDisplayId(displayId),
+      mRequestedDisplayType(displayType),
+      mRenderer(NULL)
 {
-    mDisplayId = displayId;
-    mRenderer = NULL;
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (mDisplayId)
+        mDisplayId->AddRef();
+#endif
 }
 
 Display::~Display()
 {
     terminate();
 
-    DisplayMap::iterator thisDisplay = displays.find(mDisplayId);
-
-    if (thisDisplay != displays.end())
+    DisplayMap *displays = GetDisplayMap();
+    DisplayMap::iterator iter = displays->find(mDisplayId);
+    if (iter != displays->end())
     {
-        displays.erase(thisDisplay);
+        displays->erase(iter);
     }
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (mDisplayId)
+        mDisplayId->Release();
+#endif
 }
 
 bool Display::initialize()
@@ -72,8 +87,8 @@ bool Display::initialize()
         return true;
     }
 
-    mRenderer = glCreateRenderer(this, mDisplayId);
-    
+    mRenderer = glCreateRenderer(this, mDisplayId, mRequestedDisplayType);
+
     if (!mRenderer)
     {
         terminate();
@@ -82,16 +97,16 @@ bool Display::initialize()
 
     EGLint minSwapInterval = mRenderer->getMinSwapInterval();
     EGLint maxSwapInterval = mRenderer->getMaxSwapInterval();
-    EGLint maxTextureWidth = mRenderer->getMaxTextureWidth();
-    EGLint maxTextureHeight = mRenderer->getMaxTextureHeight();
+    EGLint maxTextureSize = mRenderer->getRendererCaps().max2DTextureSize;
 
     rx::ConfigDesc *descList;
     int numConfigs = mRenderer->generateConfigs(&descList);
     ConfigSet configSet;
 
     for (int i = 0; i < numConfigs; ++i)
-        configSet.add(descList[i], minSwapInterval, maxSwapInterval,
-                      maxTextureWidth, maxTextureHeight);
+    {
+        configSet.add(descList[i], minSwapInterval, maxSwapInterval, maxTextureSize, maxTextureSize);
+    }
 
     // Give the sorted configs a unique ID and store them internally
     EGLint index = 1;
@@ -113,7 +128,7 @@ bool Display::initialize()
         return false;
     }
 
-    initExtensionString();
+    initDisplayExtensionString();
     initVendorString();
 
     return true;
@@ -192,6 +207,10 @@ EGLSurface Display::createWindowSurface(EGLNativeWindowType window, EGLConfig co
     const Config *configuration = mConfigSet.get(config);
     EGLint postSubBufferSupported = EGL_FALSE;
 
+    EGLint width = 0;
+    EGLint height = 0;
+    EGLint fixedSize = EGL_FALSE;
+
     if (attribList)
     {
         while (*attribList != EGL_NONE)
@@ -212,6 +231,15 @@ EGLSurface Display::createWindowSurface(EGLNativeWindowType window, EGLConfig co
               case EGL_POST_SUB_BUFFER_SUPPORTED_NV:
                 postSubBufferSupported = attribList[1];
                 break;
+              case EGL_WIDTH:
+                width = attribList[1];
+                break;
+              case EGL_HEIGHT:
+                height = attribList[1];
+                break;
+              case EGL_FIXED_SIZE_ANGLE:
+                fixedSize = attribList[1];
+                break;
               case EGL_VG_COLORSPACE:
                 return error(EGL_BAD_MATCH, EGL_NO_SURFACE);
               case EGL_VG_ALPHA_FORMAT:
@@ -224,6 +252,17 @@ EGLSurface Display::createWindowSurface(EGLNativeWindowType window, EGLConfig co
         }
     }
 
+    if (width < 0 || height < 0)
+    {
+        return error(EGL_BAD_PARAMETER, EGL_NO_SURFACE);
+    }
+
+    if (!fixedSize)
+    {
+        width = -1;
+        height = -1;
+    }
+
     if (hasExistingWindowSurface(window))
     {
         return error(EGL_BAD_ALLOC, EGL_NO_SURFACE);
@@ -235,7 +274,7 @@ EGLSurface Display::createWindowSurface(EGLNativeWindowType window, EGLConfig co
             return EGL_NO_SURFACE;
     }
 
-    Surface *surface = new Surface(this, configuration, window, postSubBufferSupported);
+    Surface *surface = new Surface(this, configuration, window, fixedSize, width, height, postSubBufferSupported);
 
     if (!surface->initialize())
     {
@@ -320,7 +359,7 @@ EGLSurface Display::createOffscreenSurface(EGLConfig config, HANDLE shareHandle,
         return error(EGL_BAD_ATTRIBUTE, EGL_NO_SURFACE);
     }
 
-    if (textureFormat != EGL_NO_TEXTURE && !mRenderer->getNonPower2TextureSupport() && (!gl::isPow2(width) || !gl::isPow2(height)))
+    if (textureFormat != EGL_NO_TEXTURE && !mRenderer->getRendererExtensions().textureNPOT && (!gl::isPow2(width) || !gl::isPow2(height)))
     {
         return error(EGL_BAD_MATCH, EGL_NO_SURFACE);
     }
@@ -361,22 +400,29 @@ EGLSurface Display::createOffscreenSurface(EGLConfig config, HANDLE shareHandle,
     return success(surface);
 }
 
-EGLContext Display::createContext(EGLConfig configHandle, const gl::Context *shareContext, bool notifyResets, bool robustAccess)
+EGLContext Display::createContext(EGLConfig configHandle, EGLint clientVersion, const gl::Context *shareContext, bool notifyResets, bool robustAccess)
 {
     if (!mRenderer)
     {
-        return NULL;
+        return EGL_NO_CONTEXT;
     }
     else if (mRenderer->testDeviceLost(false))   // Lost device
     {
         if (!restoreLostDevice())
-            return NULL;
+        {
+            return error(EGL_CONTEXT_LOST, EGL_NO_CONTEXT);
+        }
     }
 
-    gl::Context *context = glCreateContext(shareContext, mRenderer, notifyResets, robustAccess);
+    if (clientVersion > 2 && mRenderer->getMajorShaderModel() < 4)
+    {
+        return error(EGL_BAD_CONFIG, EGL_NO_CONTEXT);
+    }
+
+    gl::Context *context = glCreateContext(clientVersion, shareContext, mRenderer, notifyResets, robustAccess);
     mContextSet.insert(context);
 
-    return context;
+    return success(context);
 }
 
 bool Display::restoreLostDevice()
@@ -470,51 +516,86 @@ bool Display::hasExistingWindowSurface(EGLNativeWindowType window)
     return false;
 }
 
-void Display::initExtensionString()
+std::string Display::generateClientExtensionString()
 {
-    bool shareHandleSupported = mRenderer->getShareHandleSupport();
+    std::vector<std::string> extensions;
 
-    mExtensionString = "";
+    extensions.push_back("EGL_EXT_client_extensions");
 
-    // Multi-vendor (EXT) extensions
-    mExtensionString += "EGL_EXT_create_context_robustness ";
+    extensions.push_back("ANGLE_platform_angle");
 
-    // ANGLE-specific extensions
-    if (shareHandleSupported)
+    if (supportsPlatformD3D())
     {
-        mExtensionString += "EGL_ANGLE_d3d_share_handle_client_buffer ";
+        extensions.push_back("ANGLE_platform_angle_d3d");
     }
 
-    mExtensionString += "EGL_ANGLE_query_surface_pointer ";
-
-#if defined(ANGLE_ENABLE_D3D9)
-    HMODULE swiftShader = GetModuleHandle(TEXT("swiftshader_d3d9.dll"));
-    if (swiftShader)
+    if (supportsPlatformOpenGL())
     {
-        mExtensionString += "EGL_ANGLE_software_display ";
+        extensions.push_back("ANGLE_platform_angle_opengl");
     }
-#endif
 
-    if (shareHandleSupported)
+    std::ostringstream stream;
+    std::copy(extensions.begin(), extensions.end(), std::ostream_iterator<std::string>(stream, " "));
+    return stream.str();
+}
+
+void Display::initDisplayExtensionString()
+{
+    std::vector<std::string> extensions;
+
+    // Multi-vendor (EXT) extensions
+    extensions.push_back("EGL_EXT_create_context_robustness");
+
+    // ANGLE-specific extensions
+    if (mRenderer->getShareHandleSupport())
     {
-        mExtensionString += "EGL_ANGLE_surface_d3d_texture_2d_share_handle ";
+        extensions.push_back("EGL_ANGLE_d3d_share_handle_client_buffer");
+        extensions.push_back("EGL_ANGLE_surface_d3d_texture_2d_share_handle");
     }
 
+    extensions.push_back("EGL_ANGLE_query_surface_pointer");
+    extensions.push_back("EGL_ANGLE_window_fixed_size");
+
     if (mRenderer->getPostSubBufferSupport())
     {
-        mExtensionString += "EGL_NV_post_sub_buffer";
+        extensions.push_back("EGL_NV_post_sub_buffer");
     }
 
-    std::string::size_type end = mExtensionString.find_last_not_of(' ');
-    if (end != std::string::npos)
+#if defined (ANGLE_TEST_CONFIG)
+    // TODO: complete support for the EGL_KHR_create_context extension
+    extensions.push_back("EGL_KHR_create_context");
+#endif
+
+    std::ostringstream stream;
+    std::copy(extensions.begin(), extensions.end(), std::ostream_iterator<std::string>(stream, " "));
+    mDisplayExtensionString = stream.str();
+}
+
+const char *Display::getExtensionString(egl::Display *display)
+{
+    if (display != EGL_NO_DISPLAY)
+    {
+        return display->mDisplayExtensionString.c_str();
+    }
+    else
     {
-        mExtensionString.resize(end+1);
+        static std::string clientExtensions = generateClientExtensionString();
+        return clientExtensions.c_str();
     }
 }
 
-const char *Display::getExtensionString() const
+bool Display::supportsPlatformD3D()
 {
-    return mExtensionString.c_str();
+#if defined(ANGLE_ENABLE_D3D9) || defined(ANGLE_ENABLE_D3D11)
+    return true;
+#else
+    return false;
+#endif
+}
+
+bool Display::supportsPlatformOpenGL()
+{
+    return false;
 }
 
 void Display::initVendorString()
diff --git a/src/3rdparty/angle/src/libEGL/Display.h b/src/3rdparty/angle/src/libEGL/Display.h
index cd07bb3388..73ba7673ff 100644
--- a/src/3rdparty/angle/src/libEGL/Display.h
+++ b/src/3rdparty/angle/src/libEGL/Display.h
@@ -33,14 +33,19 @@ class Display
     bool initialize();
     void terminate();
 
-    static egl::Display *getDisplay(EGLNativeDisplayType displayId);
+    static egl::Display *getDisplay(EGLNativeDisplayType displayId, EGLint displayType);
+
+    static const char *getExtensionString(egl::Display *display);
+
+    static bool supportsPlatformD3D();
+    static bool supportsPlatformOpenGL();
 
     bool getConfigs(EGLConfig *configs, const EGLint *attribList, EGLint configSize, EGLint *numConfig);
     bool getConfigAttrib(EGLConfig config, EGLint attribute, EGLint *value);
 
     EGLSurface createWindowSurface(EGLNativeWindowType window, EGLConfig config, const EGLint *attribList);
     EGLSurface createOffscreenSurface(EGLConfig config, HANDLE shareHandle, const EGLint *attribList);
-    EGLContext createContext(EGLConfig configHandle, const gl::Context *shareContext, bool notifyResets, bool robustAccess);
+    EGLContext createContext(EGLConfig configHandle, EGLint clientVersion, const gl::Context *shareContext, bool notifyResets, bool robustAccess);
 
     void destroySurface(egl::Surface *surface);
     void destroyContext(gl::Context *context);
@@ -60,17 +65,18 @@ class Display
     const char *getExtensionString() const;
     const char *getVendorString() const;
 
+    EGLNativeDisplayType getDisplayId() const { return mDisplayId; }
+
   private:
     DISALLOW_COPY_AND_ASSIGN(Display);
 
-    Display(EGLNativeDisplayType displayId);
+    Display(EGLNativeDisplayType displayId, EGLint displayType);
 
     bool restoreLostDevice();
 
     EGLNativeDisplayType mDisplayId;
+    EGLint mRequestedDisplayType;
 
-    bool mSoftwareDevice;
-    
     typedef std::set<Surface*> SurfaceSet;
     SurfaceSet mSurfaceSet;
 
@@ -81,9 +87,12 @@ class Display
 
     rx::Renderer *mRenderer;
 
-    void initExtensionString();
+    static std::string generateClientExtensionString();
+
+    void initDisplayExtensionString();
+    std::string mDisplayExtensionString;
+
     void initVendorString();
-    std::string mExtensionString;
     std::string mVendorString;
 };
 }
diff --git a/src/3rdparty/angle/src/libEGL/Surface.cpp b/src/3rdparty/angle/src/libEGL/Surface.cpp
index a2e2306ae5..fa7996152a 100644
--- a/src/3rdparty/angle/src/libEGL/Surface.cpp
+++ b/src/3rdparty/angle/src/libEGL/Surface.cpp
@@ -1,6 +1,5 @@
-#include "../libGLESv2/precompiled.h"
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -23,90 +22,20 @@
 #include "libEGL/main.h"
 #include "libEGL/Display.h"
 
-#if defined(ANGLE_OS_WINRT)
-#include <wrl.h>
-#include <windows.foundation.h>
-#include <windows.ui.core.h>
-#include <windows.graphics.display.h>
-
-static bool getCoreWindowSize(const EGLNativeWindowType win, int *width, int *height)
-{
-    Microsoft::WRL::ComPtr<ABI::Windows::UI::Core::ICoreWindow> window;
-    HRESULT hr = win->QueryInterface(IID_PPV_ARGS(&window));
-    if (FAILED(hr))
-    {
-        ERR("Failed to cast native display pointer to ICoreWindow *.");
-        return false;
-    }
-
-#if _MSC_VER<=1700
-    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayPropertiesStatics> displayInformation;
-    hr = RoGetActivationFactory(Microsoft::WRL::Wrappers::HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayProperties).Get(),
-                                IID_PPV_ARGS(&displayInformation));
-#else
-    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayInformationStatics> displayInformationFactory;
-    hr = RoGetActivationFactory(Microsoft::WRL::Wrappers::HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayInformation).Get(),
-                                IID_PPV_ARGS(&displayInformationFactory));
-    if (FAILED(hr))
-    {
-        ERR("Failed to get display information factory.");
-        return false;
-    }
-
-    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayInformation> displayInformation;
-    hr = displayInformationFactory->GetForCurrentView(&displayInformation);
-#endif
-    if (FAILED(hr))
-    {
-        ERR("Failed to get display information.");
-        return false;
-    }
-
-#if defined(ANGLE_OS_WINPHONE) && _MSC_VER>=1800 // Windows Phone 8.1
-    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayInformation2> displayInformation2;
-    hr = displayInformation.As(&displayInformation2);
-    if (FAILED(hr))
-    {
-        ERR("Failed to get extended display information.");
-        return false;
-    }
-
-    DOUBLE scaleFactor;
-    hr = displayInformation2->get_RawPixelsPerViewPixel(&scaleFactor);
-    if (FAILED(hr))
-    {
-        ERR("Failed to get raw pixels per view pixel.");
-        return false;
-    }
-#else
-    ABI::Windows::Graphics::Display::ResolutionScale resolutionScale;
-    hr = displayInformation->get_ResolutionScale(&resolutionScale);
-    if (FAILED(hr))
-    {
-        ERR("Failed to get resolution scale.");
-        return false;
-    }
-    DOUBLE scaleFactor = DOUBLE(resolutionScale) / 100.0;
-#endif
-
-    ABI::Windows::Foundation::Rect windowRect;
-    hr = window->get_Bounds(&windowRect);
-    if (FAILED(hr))
-    {
-        ERR("Failed to get ICoreWindow bounds.");
-        return false;
-    }
-
-    *width = std::floor(windowRect.Width * scaleFactor + 0.5);
-    *height = std::floor(windowRect.Height * scaleFactor + 0.5);
-    return true;
-}
+#if defined(ANGLE_PLATFORM_WINRT)
+#  include "wrl.h"
+#  include "windows.graphics.display.h"
+#  include "windows.ui.core.h"
+using namespace ABI::Windows::Graphics::Display;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::UI::Core;
+using namespace Microsoft::WRL;
 #endif
 
 namespace egl
 {
 
-Surface::Surface(Display *display, const Config *config, EGLNativeWindowType window, EGLint postSubBufferSupported)
+Surface::Surface(Display *display, const Config *config, EGLNativeWindowType window, EGLint fixedSize, EGLint width, EGLint height, EGLint postSubBufferSupported)
     : mDisplay(display), mConfig(config), mWindow(window), mPostSubBufferSupported(postSubBufferSupported)
 {
     mRenderer = mDisplay->getRenderer();
@@ -120,9 +49,21 @@ Surface::Surface(Display *display, const Config *config, EGLNativeWindowType win
     mRenderBuffer = EGL_BACK_BUFFER;
     mSwapBehavior = EGL_BUFFER_PRESERVED;
     mSwapInterval = -1;
-    mWidth = -1;
-    mHeight = -1;
+    mWidth = width;
+    mHeight = height;
     setSwapInterval(1);
+    mFixedSize = fixedSize;
+    mSwapFlags = rx::SWAP_NORMAL;
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (mWindow)
+        mWindow->AddRef();
+    mScaleFactor = 1.0;
+    mSizeToken.value = 0;
+    mDpiToken.value = 0;
+#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
+    mOrientationToken.value = 0;
+#   endif
+#endif
 
     subclassWindow();
 }
@@ -142,16 +83,88 @@ Surface::Surface(Display *display, const Config *config, HANDLE shareHandle, EGL
     mSwapBehavior = EGL_BUFFER_PRESERVED;
     mSwapInterval = -1;
     setSwapInterval(1);
+    // This constructor is for offscreen surfaces, which are always fixed-size.
+    mFixedSize = EGL_TRUE;
+    mSwapFlags = rx::SWAP_NORMAL;
+#if defined(ANGLE_PLATFORM_WINRT)
+    mScaleFactor = 1.0;
+    mSizeToken.value = 0;
+    mDpiToken.value = 0;
+#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
+    mOrientationToken.value = 0;
+#   endif
+#endif
 }
 
 Surface::~Surface()
 {
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (mSizeToken.value) {
+        ComPtr<ICoreWindow> coreWindow;
+        HRESULT hr = mWindow->QueryInterface(coreWindow.GetAddressOf());
+        ASSERT(SUCCEEDED(hr));
+
+        hr = coreWindow->remove_SizeChanged(mSizeToken);
+        ASSERT(SUCCEEDED(hr));
+    }
+    if (mDpiToken.value) {
+        ComPtr<IDisplayInformation> displayInformation;
+        HRESULT hr = mDisplay->getDisplayId()->QueryInterface(displayInformation.GetAddressOf());
+        ASSERT(SUCCEEDED(hr));
+
+        hr = displayInformation->remove_DpiChanged(mDpiToken);
+        ASSERT(SUCCEEDED(hr));
+    }
+#   if WINAPI_FAMILY == WINAPI_FAMILY_PHONE_APP
+    if (mOrientationToken.value) {
+        ComPtr<IDisplayInformation> displayInformation;
+        HRESULT hr = mDisplay->getDisplayId()->QueryInterface(displayInformation.GetAddressOf());
+        ASSERT(SUCCEEDED(hr));
+
+        hr = displayInformation->remove_OrientationChanged(mOrientationToken);
+        ASSERT(SUCCEEDED(hr));
+    }
+#   endif
+#endif
     unsubclassWindow();
     release();
 }
 
 bool Surface::initialize()
 {
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (!mFixedSize) {
+        HRESULT hr;
+        ComPtr<IDisplayInformation> displayInformation;
+        hr = mDisplay->getDisplayId()->QueryInterface(displayInformation.GetAddressOf());
+        ASSERT(SUCCEEDED(hr));
+        onDpiChanged(displayInformation.Get(), 0);
+        hr = displayInformation->add_DpiChanged(Callback<ITypedEventHandler<DisplayInformation *, IInspectable *>>(this, &Surface::onDpiChanged).Get(),
+                                                &mDpiToken);
+        ASSERT(SUCCEEDED(hr));
+
+#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
+        onOrientationChanged(displayInformation.Get(), 0);
+        hr = displayInformation->add_OrientationChanged(Callback<ITypedEventHandler<DisplayInformation *, IInspectable *>>(this, &Surface::onOrientationChanged).Get(),
+                                                        &mOrientationToken);
+        ASSERT(SUCCEEDED(hr));
+#   endif
+
+        ComPtr<ICoreWindow> coreWindow;
+        hr = mWindow->QueryInterface(coreWindow.GetAddressOf());
+        ASSERT(SUCCEEDED(hr));
+
+        Rect rect;
+        hr = coreWindow->get_Bounds(&rect);
+        ASSERT(SUCCEEDED(hr));
+        mWidth = rect.Width * mScaleFactor;
+        mHeight = rect.Height * mScaleFactor;
+        hr = coreWindow->add_SizeChanged(Callback<ITypedEventHandler<CoreWindow *, WindowSizeChangedEventArgs *>>(this, &Surface::onSizeChanged).Get(),
+                                         &mSizeToken);
+        ASSERT(SUCCEEDED(hr));
+    }
+#endif
+
     if (!resetSwapChain())
       return false;
 
@@ -168,6 +181,11 @@ void Surface::release()
         mTexture->releaseTexImage();
         mTexture = NULL;
     }
+
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (mWindow)
+        mWindow->Release();
+#endif
 }
 
 bool Surface::resetSwapChain()
@@ -177,9 +195,9 @@ bool Surface::resetSwapChain()
     int width;
     int height;
 
-    if (mWindow)
+#if !defined(ANGLE_PLATFORM_WINRT)
+    if (!mFixedSize)
     {
-#if !defined(ANGLE_OS_WINRT)
         RECT windowRect;
         if (!GetClientRect(getWindowHandle(), &windowRect))
         {
@@ -191,14 +209,9 @@ bool Surface::resetSwapChain()
 
         width = windowRect.right - windowRect.left;
         height = windowRect.bottom - windowRect.top;
-#else
-        if (!getCoreWindowSize(mWindow, &width, &height))
-        {
-            return false;
-        }
-#endif
     }
     else
+#endif
     {
         // non-window surface - size is determined at creation
         width = mWidth;
@@ -228,7 +241,7 @@ bool Surface::resizeSwapChain(int backbufferWidth, int backbufferHeight)
     ASSERT(backbufferWidth >= 0 && backbufferHeight >= 0);
     ASSERT(mSwapChain);
 
-    EGLint status = mSwapChain->resize(backbufferWidth, backbufferHeight);
+    EGLint status = mSwapChain->resize(std::max(1, backbufferWidth), std::max(1, backbufferHeight));
 
     if (status == EGL_CONTEXT_LOST)
     {
@@ -251,7 +264,7 @@ bool Surface::resetSwapChain(int backbufferWidth, int backbufferHeight)
     ASSERT(backbufferWidth >= 0 && backbufferHeight >= 0);
     ASSERT(mSwapChain);
 
-    EGLint status = mSwapChain->reset(backbufferWidth, backbufferHeight, mSwapInterval);
+    EGLint status = mSwapChain->reset(std::max(1, backbufferWidth), std::max(1, backbufferHeight), mSwapInterval);
 
     if (status == EGL_CONTEXT_LOST)
     {
@@ -292,7 +305,7 @@ bool Surface::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
         return true;
     }
 
-    EGLint status = mSwapChain->swapRect(x, y, width, height);
+    EGLint status = mSwapChain->swapRect(x, y, width, height, mSwapFlags);
 
     if (status == EGL_CONTEXT_LOST)
     {
@@ -318,7 +331,7 @@ EGLNativeWindowType Surface::getWindowHandle()
 #define kSurfaceProperty _TEXT("Egl::SurfaceOwner")
 #define kParentWndProc _TEXT("Egl::SurfaceParentWndProc")
 
-#if !defined(ANGLE_OS_WINRT)
+#if !defined(ANGLE_PLATFORM_WINRT)
 static LRESULT CALLBACK SurfaceWindowProc(HWND hwnd, UINT message, WPARAM wparam, LPARAM lparam)
 {
   if (message == WM_SIZE)
@@ -336,9 +349,7 @@ static LRESULT CALLBACK SurfaceWindowProc(HWND hwnd, UINT message, WPARAM wparam
 
 void Surface::subclassWindow()
 {
-#if defined(ANGLE_OS_WINRT)
-    mWindowSubclassed = false;
-#else
+#if !defined(ANGLE_PLATFORM_WINRT)
     if (!mWindow)
     {
         return;
@@ -362,12 +373,14 @@ void Surface::subclassWindow()
     SetProp(mWindow, kSurfaceProperty, reinterpret_cast<HANDLE>(this));
     SetProp(mWindow, kParentWndProc, reinterpret_cast<HANDLE>(oldWndProc));
     mWindowSubclassed = true;
+#else
+    mWindowSubclassed = false;
 #endif
 }
 
 void Surface::unsubclassWindow()
 {
-#if !defined(ANGLE_OS_WINRT)
+#if !defined(ANGLE_PLATFORM_WINRT)
     if(!mWindowSubclassed)
     {
         return;
@@ -384,6 +397,7 @@ void Surface::unsubclassWindow()
     if(parentWndFunc)
     {
         LONG_PTR prevWndFunc = SetWindowLongPtr(mWindow, GWLP_WNDPROC, parentWndFunc);
+        UNUSED_ASSERTION_VARIABLE(prevWndFunc);
         ASSERT(prevWndFunc == reinterpret_cast<LONG_PTR>(SurfaceWindowProc));
     }
 
@@ -395,33 +409,25 @@ void Surface::unsubclassWindow()
 
 bool Surface::checkForOutOfDateSwapChain()
 {
-#if !defined(ANGLE_OS_WINRT)
-    RECT client;
-    if (!GetClientRect(getWindowHandle(), &client))
-    {
-        ASSERT(false);
-        return false;
-    }
-
-    // Grow the buffer now, if the window has grown. We need to grow now to avoid losing information.
-    int clientWidth = client.right - client.left;
-    int clientHeight = client.bottom - client.top;
-#else
-    int clientWidth;
-    int clientHeight;
-    if (!getCoreWindowSize(mWindow, &clientWidth, &clientHeight))
-    {
-        return false;
-    }
-#endif
-    bool sizeDirty = clientWidth != getWidth() || clientHeight != getHeight();
-
-#if !defined(ANGLE_OS_WINRT)
-    if (IsIconic(getWindowHandle()))
+    int clientWidth = getWidth();
+    int clientHeight = getHeight();
+    bool sizeDirty = false;
+#if !defined(ANGLE_PLATFORM_WINRT)
+    if (!mFixedSize && !IsIconic(getWindowHandle()))
     {
+        RECT client;
         // The window is automatically resized to 150x22 when it's minimized, but the swapchain shouldn't be resized
         // because that's not a useful size to render to.
-        sizeDirty = false;
+        if (!GetClientRect(getWindowHandle(), &client))
+        {
+            ASSERT(false);
+            return false;
+        }
+
+        // Grow the buffer now, if the window has grown. We need to grow now to avoid losing information.
+        clientWidth = client.right - client.left;
+        clientHeight = client.bottom - client.top;
+        sizeDirty = clientWidth != getWidth() || clientHeight != getHeight();
     }
 #endif
 
@@ -461,18 +467,8 @@ bool Surface::postSubBuffer(EGLint x, EGLint y, EGLint width, EGLint height)
         // Spec is not clear about how this should be handled.
         return true;
     }
-    
-    return swapRect(x, y, width, height);
-}
-
-EGLint Surface::getWidth() const
-{
-    return mWidth;
-}
 
-EGLint Surface::getHeight() const
-{
-    return mHeight;
+    return swapRect(x, y, width, height);
 }
 
 EGLint Surface::isPostSubBufferSupported() const
@@ -491,7 +487,7 @@ void Surface::setSwapInterval(EGLint interval)
     {
         return;
     }
-    
+
     mSwapInterval = interval;
     mSwapInterval = std::max(mSwapInterval, mRenderer->getMinSwapInterval());
     mSwapInterval = std::min(mSwapInterval, mRenderer->getMaxSwapInterval());
@@ -499,6 +495,36 @@ void Surface::setSwapInterval(EGLint interval)
     mSwapIntervalDirty = true;
 }
 
+EGLint Surface::getConfigID() const
+{
+    return mConfig->mConfigID;
+}
+
+EGLint Surface::getWidth() const
+{
+    return mWidth;
+}
+
+EGLint Surface::getHeight() const
+{
+    return mHeight;
+}
+
+EGLint Surface::getPixelAspectRatio() const
+{
+    return mPixelAspectRatio;
+}
+
+EGLenum Surface::getRenderBuffer() const
+{
+    return mRenderBuffer;
+}
+
+EGLenum Surface::getSwapBehavior() const
+{
+    return mSwapBehavior;
+}
+
 EGLenum Surface::getTextureFormat() const
 {
     return mTextureFormat;
@@ -519,8 +545,82 @@ gl::Texture2D *Surface::getBoundTexture() const
     return mTexture;
 }
 
+EGLint Surface::isFixedSize() const
+{
+    return mFixedSize;
+}
+
 EGLenum Surface::getFormat() const
 {
     return mConfig->mRenderTargetFormat;
 }
+
+#if defined(ANGLE_PLATFORM_WINRT)
+
+HRESULT Surface::onSizeChanged(ICoreWindow *, IWindowSizeChangedEventArgs *args)
+{
+    HRESULT hr;
+    Size size;
+    hr = args->get_Size(&size);
+    ASSERT(SUCCEEDED(hr));
+
+    resizeSwapChain(std::floor(size.Width * mScaleFactor + 0.5),
+                    std::floor(size.Height * mScaleFactor + 0.5));
+
+    if (static_cast<egl::Surface*>(getCurrentDrawSurface()) == this)
+    {
+        glMakeCurrent(glGetCurrentContext(), static_cast<egl::Display*>(getCurrentDisplay()), this);
+    }
+
+    return S_OK;
+}
+
+HRESULT Surface::onDpiChanged(IDisplayInformation *displayInformation, IInspectable *)
+{
+    HRESULT hr;
+#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
+    ComPtr<IDisplayInformation2> displayInformation2;
+    hr = displayInformation->QueryInterface(displayInformation2.GetAddressOf());
+    ASSERT(SUCCEEDED(hr));
+
+    hr = displayInformation2->get_RawPixelsPerViewPixel(&mScaleFactor);
+    ASSERT(SUCCEEDED(hr));
+#   else
+    ResolutionScale resolutionScale;
+    hr = displayInformation->get_ResolutionScale(&resolutionScale);
+    ASSERT(SUCCEEDED(hr));
+
+    mScaleFactor = double(resolutionScale) / 100.0;
+#   endif
+    return S_OK;
+}
+
+#   if WINAPI_FAMILY == WINAPI_FAMILY_PHONE_APP
+HRESULT Surface::onOrientationChanged(IDisplayInformation *displayInformation, IInspectable *)
+{
+    HRESULT hr;
+    DisplayOrientations orientation;
+    hr = displayInformation->get_CurrentOrientation(&orientation);
+    ASSERT(SUCCEEDED(hr));
+    switch (orientation) {
+    default:
+    case DisplayOrientations_Portrait:
+        mSwapFlags = rx::SWAP_NORMAL;
+        break;
+    case DisplayOrientations_Landscape:
+        mSwapFlags = rx::SWAP_ROTATE_90;
+        break;
+    case DisplayOrientations_LandscapeFlipped:
+        mSwapFlags = rx::SWAP_ROTATE_270;
+        break;
+    case DisplayOrientations_PortraitFlipped:
+        mSwapFlags = rx::SWAP_ROTATE_180;
+        break;
+    }
+    return S_OK;
+}
+#   endif
+
+#endif
+
 }
diff --git a/src/3rdparty/angle/src/libEGL/Surface.h b/src/3rdparty/angle/src/libEGL/Surface.h
index 1d2303c6eb..ebffce8fed 100644
--- a/src/3rdparty/angle/src/libEGL/Surface.h
+++ b/src/3rdparty/angle/src/libEGL/Surface.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,11 +11,24 @@
 #ifndef LIBEGL_SURFACE_H_
 #define LIBEGL_SURFACE_H_
 
-#define EGLAPI
 #include <EGL/egl.h>
 
 #include "common/angleutils.h"
 
+#if defined(ANGLE_PLATFORM_WINRT)
+#include <EventToken.h>
+namespace ABI { namespace Windows {
+    namespace UI { namespace Core {
+        struct ICoreWindow;
+        struct IWindowSizeChangedEventArgs;
+    } }
+    namespace Graphics { namespace Display {
+        struct IDisplayInformation;
+    } }
+} }
+struct IInspectable;
+#endif
+
 namespace gl
 {
 class Texture2D;
@@ -34,10 +47,10 @@ class Config;
 class Surface
 {
   public:
-    Surface(Display *display, const egl::Config *config, EGLNativeWindowType window, EGLint postSubBufferSupported);
+    Surface(Display *display, const egl::Config *config, EGLNativeWindowType window, EGLint fixedSize, EGLint width, EGLint height, EGLint postSubBufferSupported);
     Surface(Display *display, const egl::Config *config, HANDLE shareHandle, EGLint width, EGLint height, EGLenum textureFormat, EGLenum textureTarget);
 
-    ~Surface();
+    virtual ~Surface();
 
     bool initialize();
     void release();
@@ -47,9 +60,6 @@ class Surface
     bool swap();
     bool postSubBuffer(EGLint x, EGLint y, EGLint width, EGLint height);
 
-    virtual EGLint getWidth() const;
-    virtual EGLint getHeight() const;
-
     virtual EGLint isPostSubBufferSupported() const;
 
     virtual rx::SwapChain *getSwapChain() const;
@@ -57,6 +67,12 @@ class Surface
     void setSwapInterval(EGLint interval);
     bool checkForOutOfDateSwapChain();   // Returns true if swapchain changed due to resize or interval update
 
+    virtual EGLint getConfigID() const;
+    virtual EGLint getWidth() const;
+    virtual EGLint getHeight() const;
+    virtual EGLint getPixelAspectRatio() const;
+    virtual EGLenum getRenderBuffer() const;
+    virtual EGLenum getSwapBehavior() const;
     virtual EGLenum getTextureFormat() const;
     virtual EGLenum getTextureTarget() const;
     virtual EGLenum getFormat() const;
@@ -64,9 +80,19 @@ class Surface
     virtual void setBoundTexture(gl::Texture2D *texture);
     virtual gl::Texture2D *getBoundTexture() const;
 
+    EGLint isFixedSize() const;
+
 private:
     DISALLOW_COPY_AND_ASSIGN(Surface);
 
+#if defined(ANGLE_PLATFORM_WINRT)
+    HRESULT onSizeChanged(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IWindowSizeChangedEventArgs *);
+    HRESULT onDpiChanged(ABI::Windows::Graphics::Display::IDisplayInformation *, IInspectable *);
+#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
+    HRESULT onOrientationChanged(ABI::Windows::Graphics::Display::IDisplayInformation *, IInspectable *);
+#   endif
+#endif
+
     Display *const mDisplay;
     rx::Renderer *mRenderer;
 
@@ -79,7 +105,7 @@ private:
     bool resetSwapChain(int backbufferWidth, int backbufferHeight);
     bool swapRect(EGLint x, EGLint y, EGLint width, EGLint height);
 
-    const EGLNativeWindowType mWindow; // Window that the surface is created for.
+    const EGLNativeWindowType mWindow;            // Window that the surface is created for.
     bool mWindowSubclassed;        // Indicates whether we successfully subclassed mWindow for WM_RESIZE hooking
     const egl::Config *mConfig;    // EGL config surface was created with
     EGLint mHeight;                // Height of surface
@@ -99,9 +125,19 @@ private:
 //  EGLenum vgColorSpace;          // Color space for OpenVG
     EGLint mSwapInterval;
     EGLint mPostSubBufferSupported;
-    
+    EGLint mFixedSize;
+    EGLint mSwapFlags;
+
     bool mSwapIntervalDirty;
     gl::Texture2D *mTexture;
+#if defined(ANGLE_PLATFORM_WINRT)
+    double mScaleFactor;
+    EventRegistrationToken mSizeToken;
+    EventRegistrationToken mDpiToken;
+#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
+    EventRegistrationToken mOrientationToken;
+#   endif
+#endif
 };
 }
 
diff --git a/src/3rdparty/angle/src/libEGL/libEGL.cpp b/src/3rdparty/angle/src/libEGL/libEGL.cpp
index b2944d5c0d..c2e0fd6d3d 100644
--- a/src/3rdparty/angle/src/libEGL/libEGL.cpp
+++ b/src/3rdparty/angle/src/libEGL/libEGL.cpp
@@ -1,19 +1,26 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 // libEGL.cpp: Implements the exported EGL functions.
 
+#undef EGLAPI
+#define EGLAPI
+
 #include <exception>
 
 #include "common/debug.h"
 #include "common/version.h"
+#include "common/platform.h"
 #include "libGLESv2/Context.h"
 #include "libGLESv2/Texture.h"
 #include "libGLESv2/main.h"
 #include "libGLESv2/renderer/SwapChain.h"
+#if defined(ANGLE_ENABLE_D3D11)
+#  include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#endif
 
 #include "libEGL/main.h"
 #include "libEGL/Display.h"
@@ -99,99 +106,139 @@ EGLDisplay __stdcall eglGetDisplay(EGLNativeDisplayType display_id)
 {
     EVENT("(EGLNativeDisplayType display_id = 0x%0.8p)", display_id);
 
-    try
+    return egl::Display::getDisplay(display_id, EGL_PLATFORM_ANGLE_TYPE_DEFAULT_ANGLE);
+}
+
+EGLDisplay __stdcall eglGetPlatformDisplayEXT(EGLenum platform, void *native_display, const EGLint *attrib_list)
+{
+    EVENT("(EGLenum platform = %d, void* native_display = 0x%0.8p, const EGLint* attrib_list = 0x%0.8p)",
+          platform, native_display, attrib_list);
+
+    switch (platform)
     {
-        return egl::Display::getDisplay(display_id);
+      case EGL_PLATFORM_ANGLE_ANGLE:
+        break;
+
+      default:
+        return egl::error(EGL_BAD_CONFIG, EGL_NO_DISPLAY);
     }
-    catch(std::bad_alloc&)
+
+    EGLNativeDisplayType displayId = static_cast<EGLNativeDisplayType>(native_display);
+#if !defined(ANGLE_PLATFORM_WINRT)
+    // Validate the display device context
+    if (WindowFromDC(displayId) == NULL)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_DISPLAY);
+        return egl::success(EGL_NO_DISPLAY);
     }
-}
-
-EGLBoolean __stdcall eglInitialize(EGLDisplay dpy, EGLint *major, EGLint *minor)
-{
-    EVENT("(EGLDisplay dpy = 0x%0.8p, EGLint *major = 0x%0.8p, EGLint *minor = 0x%0.8p)",
-          dpy, major, minor);
+#endif
 
-    try
+    EGLint requestedDisplayType = EGL_PLATFORM_ANGLE_TYPE_DEFAULT_ANGLE;
+    if (attrib_list)
     {
-        if (dpy == EGL_NO_DISPLAY)
+        for (const EGLint *curAttrib = attrib_list; curAttrib[0] != EGL_NONE; curAttrib += 2)
         {
-            return egl::error(EGL_BAD_DISPLAY, EGL_FALSE);
+            switch (curAttrib[0])
+            {
+              case EGL_PLATFORM_ANGLE_TYPE_ANGLE:
+                requestedDisplayType = curAttrib[1];
+                break;
+
+              default:
+                break;
+            }
         }
+    }
 
-        egl::Display *display = static_cast<egl::Display*>(dpy);
+    switch (requestedDisplayType)
+    {
+      case EGL_PLATFORM_ANGLE_TYPE_DEFAULT_ANGLE:
+        break;
 
-        if (!display->initialize())
+      case EGL_PLATFORM_ANGLE_TYPE_D3D9_ANGLE:
+      case EGL_PLATFORM_ANGLE_TYPE_D3D11_ANGLE:
+      case EGL_PLATFORM_ANGLE_TYPE_D3D11_WARP_ANGLE:
+        if (!egl::Display::supportsPlatformD3D())
         {
-            return egl::error(EGL_NOT_INITIALIZED, EGL_FALSE);
+            return egl::success(EGL_NO_DISPLAY);
         }
+        break;
 
-        if (major) *major = 1;
-        if (minor) *minor = 4;
+      case EGL_PLATFORM_ANGLE_TYPE_OPENGL_ANGLE:
+      case EGL_PLATFORM_ANGLE_TYPE_OPENGLES_ANGLE:
+        if (!egl::Display::supportsPlatformOpenGL())
+        {
+            return egl::success(EGL_NO_DISPLAY);
+        }
+        break;
 
-        return egl::success(EGL_TRUE);
+      default:
+        return egl::success(EGL_NO_DISPLAY);
     }
-    catch(std::bad_alloc&)
+
+    return egl::Display::getDisplay(displayId, requestedDisplayType);
+}
+
+EGLBoolean __stdcall eglInitialize(EGLDisplay dpy, EGLint *major, EGLint *minor)
+{
+    EVENT("(EGLDisplay dpy = 0x%0.8p, EGLint *major = 0x%0.8p, EGLint *minor = 0x%0.8p)",
+          dpy, major, minor);
+
+    if (dpy == EGL_NO_DISPLAY)
+    {
+        return egl::error(EGL_BAD_DISPLAY, EGL_FALSE);
+    }
+
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+
+    if (!display->initialize())
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_NOT_INITIALIZED, EGL_FALSE);
     }
+
+    if (major) *major = 1;
+    if (minor) *minor = 4;
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglTerminate(EGLDisplay dpy)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p)", dpy);
 
-    try
+    if (dpy == EGL_NO_DISPLAY)
     {
-        if (dpy == EGL_NO_DISPLAY)
-        {
-            return egl::error(EGL_BAD_DISPLAY, EGL_FALSE);
-        }
+        return egl::error(EGL_BAD_DISPLAY, EGL_FALSE);
+    }
 
-        egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        display->terminate();
+    display->terminate();
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(EGL_TRUE);
 }
 
 const char *__stdcall eglQueryString(EGLDisplay dpy, EGLint name)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLint name = %d)", dpy, name);
 
-    try
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    if (!(display == EGL_NO_DISPLAY && name == EGL_EXTENSIONS) && !validateDisplay(display))
     {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        if (!validateDisplay(display))
-        {
-            return NULL;
-        }
-
-        switch (name)
-        {
-          case EGL_CLIENT_APIS:
-            return egl::success("OpenGL_ES");
-          case EGL_EXTENSIONS:
-            return egl::success(display->getExtensionString());
-          case EGL_VENDOR:
-            return egl::success(display->getVendorString());
-          case EGL_VERSION:
-            return egl::success("1.4 (ANGLE " ANGLE_VERSION_STRING ")");
-        }
-
-        return egl::error(EGL_BAD_PARAMETER, (const char*)NULL);
+        return NULL;
     }
-    catch(std::bad_alloc&)
+
+    switch (name)
     {
-        return egl::error(EGL_BAD_ALLOC, (const char*)NULL);
+      case EGL_CLIENT_APIS:
+        return egl::success("OpenGL_ES");
+      case EGL_EXTENSIONS:
+        return egl::success(egl::Display::getExtensionString(display));
+      case EGL_VENDOR:
+        return egl::success(display->getVendorString());
+      case EGL_VERSION:
+        return egl::success("1.4 (ANGLE " ANGLE_VERSION_STRING ")");
+      default:
+        return egl::error(EGL_BAD_PARAMETER, (const char*)NULL);
     }
 }
 
@@ -201,33 +248,26 @@ EGLBoolean __stdcall eglGetConfigs(EGLDisplay dpy, EGLConfig *configs, EGLint co
           "EGLint config_size = %d, EGLint *num_config = 0x%0.8p)",
           dpy, configs, config_size, num_config);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        if (!validateDisplay(display))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        if (!num_config)
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
-        }
+    if (!validateDisplay(display))
+    {
+        return EGL_FALSE;
+    }
 
-        const EGLint attribList[] =    {EGL_NONE};
+    if (!num_config)
+    {
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
+    }
 
-        if (!display->getConfigs(configs, attribList, config_size, num_config))
-        {
-            return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
-        }
+    const EGLint attribList[] =    {EGL_NONE};
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
+    if (!display->getConfigs(configs, attribList, config_size, num_config))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
     }
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglChooseConfig(EGLDisplay dpy, const EGLint *attrib_list, EGLConfig *configs, EGLint config_size, EGLint *num_config)
@@ -236,35 +276,28 @@ EGLBoolean __stdcall eglChooseConfig(EGLDisplay dpy, const EGLint *attrib_list,
           "EGLConfig *configs = 0x%0.8p, EGLint config_size = %d, EGLint *num_config = 0x%0.8p)",
           dpy, attrib_list, configs, config_size, num_config);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        if (!validateDisplay(display))
-        {
-            return EGL_FALSE;
-        }
-
-        if (!num_config)
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
-        }
-
-        const EGLint attribList[] =    {EGL_NONE};
+    if (!validateDisplay(display))
+    {
+        return EGL_FALSE;
+    }
 
-        if (!attrib_list)
-        {
-            attrib_list = attribList;
-        }
+    if (!num_config)
+    {
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
+    }
 
-        display->getConfigs(configs, attrib_list, config_size, num_config);
+    const EGLint attribList[] =    {EGL_NONE};
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
+    if (!attrib_list)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        attrib_list = attribList;
     }
+
+    display->getConfigs(configs, attrib_list, config_size, num_config);
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglGetConfigAttrib(EGLDisplay dpy, EGLConfig config, EGLint attribute, EGLint *value)
@@ -272,26 +305,19 @@ EGLBoolean __stdcall eglGetConfigAttrib(EGLDisplay dpy, EGLConfig config, EGLint
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLConfig config = 0x%0.8p, EGLint attribute = %d, EGLint *value = 0x%0.8p)",
           dpy, config, attribute, value);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        if (!validateConfig(display, config))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        if (!display->getConfigAttrib(config, attribute, value))
-        {
-            return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
-        }
-
-        return egl::success(EGL_TRUE);
+    if (!validateConfig(display, config))
+    {
+        return EGL_FALSE;
     }
-    catch(std::bad_alloc&)
+
+    if (!display->getConfigAttrib(config, attribute, value))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
     }
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLSurface __stdcall eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config, EGLNativeWindowType win, const EGLint *attrib_list)
@@ -299,30 +325,23 @@ EGLSurface __stdcall eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config, EG
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLConfig config = 0x%0.8p, EGLNativeWindowType win = 0x%0.8p, "
           "const EGLint *attrib_list = 0x%0.8p)", dpy, config, win, attrib_list);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        if (!validateConfig(display, config))
-        {
-            return EGL_NO_SURFACE;
-        }
-
-#if !defined(ANGLE_OS_WINRT)
-        HWND window = (HWND)win;
+    if (!validateConfig(display, config))
+    {
+        return EGL_NO_SURFACE;
+    }
 
-        if (!IsWindow(window))
-        {
-            return egl::error(EGL_BAD_NATIVE_WINDOW, EGL_NO_SURFACE);
-        }
-#endif
+#if !defined(ANGLE_PLATFORM_WINRT)
+    HWND window = (HWND)win;
 
-        return display->createWindowSurface(win, config, attrib_list);
-    }
-    catch(std::bad_alloc&)
+    if (!IsWindow(window))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_SURFACE);
+        return egl::error(EGL_BAD_NATIVE_WINDOW, EGL_NO_SURFACE);
     }
+#endif
+
+    return display->createWindowSurface(win, config, attrib_list);
 }
 
 EGLSurface __stdcall eglCreatePbufferSurface(EGLDisplay dpy, EGLConfig config, const EGLint *attrib_list)
@@ -330,21 +349,14 @@ EGLSurface __stdcall eglCreatePbufferSurface(EGLDisplay dpy, EGLConfig config, c
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLConfig config = 0x%0.8p, const EGLint *attrib_list = 0x%0.8p)",
           dpy, config, attrib_list);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        if (!validateConfig(display, config))
-        {
-            return EGL_NO_SURFACE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        return display->createOffscreenSurface(config, NULL, attrib_list);
-    }
-    catch(std::bad_alloc&)
+    if (!validateConfig(display, config))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_SURFACE);
+        return EGL_NO_SURFACE;
     }
+
+    return display->createOffscreenSurface(config, NULL, attrib_list);
 }
 
 EGLSurface __stdcall eglCreatePixmapSurface(EGLDisplay dpy, EGLConfig config, EGLNativePixmapType pixmap, const EGLint *attrib_list)
@@ -352,52 +364,38 @@ EGLSurface __stdcall eglCreatePixmapSurface(EGLDisplay dpy, EGLConfig config, EG
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLConfig config = 0x%0.8p, EGLNativePixmapType pixmap = 0x%0.8p, "
           "const EGLint *attrib_list = 0x%0.8p)", dpy, config, pixmap, attrib_list);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        if (!validateConfig(display, config))
-        {
-            return EGL_NO_SURFACE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        UNIMPLEMENTED();   // FIXME
-
-        return egl::success(EGL_NO_SURFACE);
-    }
-    catch(std::bad_alloc&)
+    if (!validateConfig(display, config))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_SURFACE);
+        return EGL_NO_SURFACE;
     }
+
+    UNIMPLEMENTED();   // FIXME
+
+    return egl::success(EGL_NO_SURFACE);
 }
 
 EGLBoolean __stdcall eglDestroySurface(EGLDisplay dpy, EGLSurface surface)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p)", dpy, surface);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
-
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
-
-        if (surface == EGL_NO_SURFACE)
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
-
-        display->destroySurface((egl::Surface*)surface);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
 
-        return egl::success(EGL_TRUE);
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
     }
-    catch(std::bad_alloc&)
+
+    if (surface == EGL_NO_SURFACE)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
     }
+
+    display->destroySurface((egl::Surface*)surface);
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglQuerySurface(EGLDisplay dpy, EGLSurface surface, EGLint attribute, EGLint *value)
@@ -405,84 +403,80 @@ EGLBoolean __stdcall eglQuerySurface(EGLDisplay dpy, EGLSurface surface, EGLint
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLint attribute = %d, EGLint *value = 0x%0.8p)",
           dpy, surface, attribute, value);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = (egl::Surface*)surface;
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = (egl::Surface*)surface;
 
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
-
-        if (surface == EGL_NO_SURFACE)
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
-
-        switch (attribute)
-        {
-          case EGL_VG_ALPHA_FORMAT:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_VG_COLORSPACE:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_CONFIG_ID:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_HEIGHT:
-            *value = eglSurface->getHeight();
-            break;
-          case EGL_HORIZONTAL_RESOLUTION:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_LARGEST_PBUFFER:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_MIPMAP_TEXTURE:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_MIPMAP_LEVEL:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_MULTISAMPLE_RESOLVE:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_PIXEL_ASPECT_RATIO:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_RENDER_BUFFER:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_SWAP_BEHAVIOR:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_TEXTURE_FORMAT:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_TEXTURE_TARGET:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_VERTICAL_RESOLUTION:
-            UNIMPLEMENTED();   // FIXME
-            break;
-          case EGL_WIDTH:
-            *value = eglSurface->getWidth();
-            break;
-          case EGL_POST_SUB_BUFFER_SUPPORTED_NV:
-            *value = eglSurface->isPostSubBufferSupported();
-            break;
-          default:
-            return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
-        }
-
-        return egl::success(EGL_TRUE);
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
     }
-    catch(std::bad_alloc&)
+
+    if (surface == EGL_NO_SURFACE)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
     }
+
+    switch (attribute)
+    {
+      case EGL_VG_ALPHA_FORMAT:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_VG_COLORSPACE:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_CONFIG_ID:
+        *value = eglSurface->getConfigID();
+        break;
+      case EGL_HEIGHT:
+        *value = eglSurface->getHeight();
+        break;
+      case EGL_HORIZONTAL_RESOLUTION:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_LARGEST_PBUFFER:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_MIPMAP_TEXTURE:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_MIPMAP_LEVEL:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_MULTISAMPLE_RESOLVE:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_PIXEL_ASPECT_RATIO:
+        *value = eglSurface->getPixelAspectRatio();
+        break;
+      case EGL_RENDER_BUFFER:
+        *value = eglSurface->getRenderBuffer();
+        break;
+      case EGL_SWAP_BEHAVIOR:
+        *value = eglSurface->getSwapBehavior();
+        break;
+      case EGL_TEXTURE_FORMAT:
+        *value = eglSurface->getTextureFormat();
+        break;
+      case EGL_TEXTURE_TARGET:
+        *value = eglSurface->getTextureTarget();
+        break;
+      case EGL_VERTICAL_RESOLUTION:
+        UNIMPLEMENTED();   // FIXME
+        break;
+      case EGL_WIDTH:
+        *value = eglSurface->getWidth();
+        break;
+      case EGL_POST_SUB_BUFFER_SUPPORTED_NV:
+        *value = eglSurface->isPostSubBufferSupported();
+        break;
+      case EGL_FIXED_SIZE_ANGLE:
+        *value = eglSurface->isFixedSize();
+        break;
+      default:
+        return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
+    }
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglQuerySurfacePointerANGLE(EGLDisplay dpy, EGLSurface surface, EGLint attribute, void **value)
@@ -490,114 +484,103 @@ EGLBoolean __stdcall eglQuerySurfacePointerANGLE(EGLDisplay dpy, EGLSurface surf
     TRACE("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLint attribute = %d, void **value = 0x%0.8p)",
           dpy, surface, attribute, value);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = (egl::Surface*)surface;
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = (egl::Surface*)surface;
 
-        if (!validateSurface(display, eglSurface))
+    switch (attribute)
+    {
+      case EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE:
         {
-            return EGL_FALSE;
-        }
+            if (!validateSurface(display, eglSurface))
+            {
+                return EGL_FALSE;
+            }
 
-        if (surface == EGL_NO_SURFACE)
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
+            if (surface == EGL_NO_SURFACE)
+            {
+                return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
+            }
 
-        switch (attribute)
+            rx::SwapChain *swapchain = eglSurface->getSwapChain();
+            *value = (void*) (swapchain ? swapchain->getShareHandle() : NULL);
+        }
+        break;
+#if defined(ANGLE_ENABLE_D3D11)
+      case EGL_DEVICE_EXT:
         {
-          case EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE:
+            if (!validateDisplay(display))
             {
-                rx::SwapChain *swapchain = eglSurface->getSwapChain();
-                *value = (void*) (swapchain ? swapchain->getShareHandle() : NULL);
+                return EGL_FALSE;
             }
-            break;
-          default:
-            return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
-        }
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+            rx::Renderer *renderer = display->getRenderer();
+            if (!renderer)
+            {
+                *value = NULL;
+                break;
+            }
+
+            if (renderer->getMajorShaderModel() < 4)
+            {
+                return egl::error(EGL_BAD_CONTEXT, EGL_FALSE);
+            }
+
+            *value = static_cast<rx::Renderer11*>(renderer)->getDevice();
+        }
+        break;
+#endif
+      default:
+        return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
     }
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglBindAPI(EGLenum api)
 {
     EVENT("(EGLenum api = 0x%X)", api);
 
-    try
+    switch (api)
     {
-        switch (api)
-        {
-          case EGL_OPENGL_API:
-          case EGL_OPENVG_API:
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);   // Not supported by this implementation
-          case EGL_OPENGL_ES_API:
-            break;
-          default:
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
-        }
+      case EGL_OPENGL_API:
+      case EGL_OPENVG_API:
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);   // Not supported by this implementation
+      case EGL_OPENGL_ES_API:
+        break;
+      default:
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
+    }
 
-        egl::setCurrentAPI(api);
+    egl::setCurrentAPI(api);
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(EGL_TRUE);
 }
 
 EGLenum __stdcall eglQueryAPI(void)
 {
     EVENT("()");
 
-    try
-    {
-        EGLenum API = egl::getCurrentAPI();
+    EGLenum API = egl::getCurrentAPI();
 
-        return egl::success(API);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(API);
 }
 
 EGLBoolean __stdcall eglWaitClient(void)
 {
     EVENT("()");
 
-    try
-    {
-        UNIMPLEMENTED();   // FIXME
+    UNIMPLEMENTED();   // FIXME
 
-        return egl::success(0);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(0);
 }
 
 EGLBoolean __stdcall eglReleaseThread(void)
 {
     EVENT("()");
 
-    try
-    {
-        eglMakeCurrent(EGL_NO_DISPLAY, EGL_NO_CONTEXT, EGL_NO_SURFACE, EGL_NO_SURFACE);
+    eglMakeCurrent(EGL_NO_DISPLAY, EGL_NO_CONTEXT, EGL_NO_SURFACE, EGL_NO_SURFACE);
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(EGL_TRUE);
 }
 
 EGLSurface __stdcall eglCreatePbufferFromClientBuffer(EGLDisplay dpy, EGLenum buftype, EGLClientBuffer buffer, EGLConfig config, const EGLint *attrib_list)
@@ -606,26 +589,19 @@ EGLSurface __stdcall eglCreatePbufferFromClientBuffer(EGLDisplay dpy, EGLenum bu
           "EGLConfig config = 0x%0.8p, const EGLint *attrib_list = 0x%0.8p)",
           dpy, buftype, buffer, config, attrib_list);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        if (!validateConfig(display, config))
-        {
-            return EGL_NO_SURFACE;
-        }
-
-        if (buftype != EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE || !buffer)
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_NO_SURFACE);
-        }
-
-        return display->createOffscreenSurface(config, (HANDLE)buffer, attrib_list);
+    if (!validateConfig(display, config))
+    {
+        return EGL_NO_SURFACE;
     }
-    catch(std::bad_alloc&)
+
+    if (buftype != EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE || !buffer)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_SURFACE);
+        return egl::error(EGL_BAD_PARAMETER, EGL_NO_SURFACE);
     }
+
+    return display->createOffscreenSurface(config, (HANDLE)buffer, attrib_list);
 }
 
 EGLBoolean __stdcall eglSurfaceAttrib(EGLDisplay dpy, EGLSurface surface, EGLint attribute, EGLint value)
@@ -633,145 +609,117 @@ EGLBoolean __stdcall eglSurfaceAttrib(EGLDisplay dpy, EGLSurface surface, EGLint
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLint attribute = %d, EGLint value = %d)",
           dpy, surface, attribute, value);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
-
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
 
-        UNIMPLEMENTED();   // FIXME
-
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
+    if (!validateSurface(display, eglSurface))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return EGL_FALSE;
     }
+
+    UNIMPLEMENTED();   // FIXME
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglBindTexImage(EGLDisplay dpy, EGLSurface surface, EGLint buffer)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLint buffer = %d)", dpy, surface, buffer);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
-
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
 
-        if (buffer != EGL_BACK_BUFFER)
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
-        }
-
-        if (surface == EGL_NO_SURFACE || eglSurface->getWindowHandle())
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
+    }
 
-        if (eglSurface->getBoundTexture())
-        {
-            return egl::error(EGL_BAD_ACCESS, EGL_FALSE);
-        }
+    if (buffer != EGL_BACK_BUFFER)
+    {
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
+    }
 
-        if (eglSurface->getTextureFormat() == EGL_NO_TEXTURE)
-        {
-            return egl::error(EGL_BAD_MATCH, EGL_FALSE);
-        }
+    if (surface == EGL_NO_SURFACE || eglSurface->getWindowHandle())
+    {
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
+    }
 
-        if (!glBindTexImage(eglSurface))
-        {
-            return egl::error(EGL_BAD_MATCH, EGL_FALSE);
-        }
+    if (eglSurface->getBoundTexture())
+    {
+        return egl::error(EGL_BAD_ACCESS, EGL_FALSE);
+    }
 
-        return egl::success(EGL_TRUE);
+    if (eglSurface->getTextureFormat() == EGL_NO_TEXTURE)
+    {
+        return egl::error(EGL_BAD_MATCH, EGL_FALSE);
     }
-    catch(std::bad_alloc&)
+
+    if (!glBindTexImage(eglSurface))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_MATCH, EGL_FALSE);
     }
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglReleaseTexImage(EGLDisplay dpy, EGLSurface surface, EGLint buffer)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLint buffer = %d)", dpy, surface, buffer);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
-
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
 
-        if (buffer != EGL_BACK_BUFFER)
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
-        }
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
+    }
 
-        if (surface == EGL_NO_SURFACE || eglSurface->getWindowHandle())
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
+    if (buffer != EGL_BACK_BUFFER)
+    {
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
+    }
 
-        if (eglSurface->getTextureFormat() == EGL_NO_TEXTURE)
-        {
-            return egl::error(EGL_BAD_MATCH, EGL_FALSE);
-        }
+    if (surface == EGL_NO_SURFACE || eglSurface->getWindowHandle())
+    {
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
+    }
 
-        gl::Texture2D *texture = eglSurface->getBoundTexture();
+    if (eglSurface->getTextureFormat() == EGL_NO_TEXTURE)
+    {
+        return egl::error(EGL_BAD_MATCH, EGL_FALSE);
+    }
 
-        if (texture)
-        {
-            texture->releaseTexImage();
-        }
+    gl::Texture2D *texture = eglSurface->getBoundTexture();
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
+    if (texture)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        texture->releaseTexImage();
     }
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglSwapInterval(EGLDisplay dpy, EGLint interval)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLint interval = %d)", dpy, interval);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        if (!validateDisplay(display))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        egl::Surface *draw_surface = static_cast<egl::Surface*>(egl::getCurrentDrawSurface());
+    if (!validateDisplay(display))
+    {
+        return EGL_FALSE;
+    }
 
-        if (draw_surface == NULL)
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
-        
-        draw_surface->setSwapInterval(interval);
+    egl::Surface *draw_surface = static_cast<egl::Surface*>(egl::getCurrentDrawSurface());
 
-        return egl::success(EGL_TRUE);
-    }
-    catch(std::bad_alloc&)
+    if (draw_surface == NULL)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
     }
+
+    draw_surface->setSwapInterval(interval);
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLContext __stdcall eglCreateContext(EGLDisplay dpy, EGLConfig config, EGLContext share_context, const EGLint *attrib_list)
@@ -779,108 +727,97 @@ EGLContext __stdcall eglCreateContext(EGLDisplay dpy, EGLConfig config, EGLConte
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLConfig config = 0x%0.8p, EGLContext share_context = 0x%0.8p, "
           "const EGLint *attrib_list = 0x%0.8p)", dpy, config, share_context, attrib_list);
 
-    try
-    {
-        // Get the requested client version (default is 1) and check it is two.
-        EGLint client_version = 1;
-        bool reset_notification = false;
-        bool robust_access = false;
+    // Get the requested client version (default is 1) and check it is 2 or 3.
+    EGLint client_version = 1;
+    bool reset_notification = false;
+    bool robust_access = false;
 
-        if (attrib_list)
+    if (attrib_list)
+    {
+        for (const EGLint* attribute = attrib_list; attribute[0] != EGL_NONE; attribute += 2)
         {
-            for (const EGLint* attribute = attrib_list; attribute[0] != EGL_NONE; attribute += 2)
+            switch (attribute[0])
             {
-                switch (attribute[0])
+              case EGL_CONTEXT_CLIENT_VERSION:
+                client_version = attribute[1];
+                break;
+              case EGL_CONTEXT_OPENGL_ROBUST_ACCESS_EXT:
+                if (attribute[1] == EGL_TRUE)
                 {
-                  case EGL_CONTEXT_CLIENT_VERSION:
-                    client_version = attribute[1];
-                    break;
-                  case EGL_CONTEXT_OPENGL_ROBUST_ACCESS_EXT:
-                    if (attribute[1] == EGL_TRUE)
-                    {
-                        return egl::error(EGL_BAD_CONFIG, EGL_NO_CONTEXT);   // Unimplemented
-                        // robust_access = true;
-                    }
-                    else if (attribute[1] != EGL_FALSE)
-                        return egl::error(EGL_BAD_ATTRIBUTE, EGL_NO_CONTEXT);
-                    break;
-                  case EGL_CONTEXT_OPENGL_RESET_NOTIFICATION_STRATEGY_EXT:
-                    if (attribute[1] == EGL_LOSE_CONTEXT_ON_RESET_EXT)
-                        reset_notification = true;
-                    else if (attribute[1] != EGL_NO_RESET_NOTIFICATION_EXT)
-                        return egl::error(EGL_BAD_ATTRIBUTE, EGL_NO_CONTEXT);
-                    break;
-                  default:
-                    return egl::error(EGL_BAD_ATTRIBUTE, EGL_NO_CONTEXT);
+                    return egl::error(EGL_BAD_CONFIG, EGL_NO_CONTEXT);   // Unimplemented
+                    // robust_access = true;
                 }
+                else if (attribute[1] != EGL_FALSE)
+                    return egl::error(EGL_BAD_ATTRIBUTE, EGL_NO_CONTEXT);
+                break;
+              case EGL_CONTEXT_OPENGL_RESET_NOTIFICATION_STRATEGY_EXT:
+                if (attribute[1] == EGL_LOSE_CONTEXT_ON_RESET_EXT)
+                    reset_notification = true;
+                else if (attribute[1] != EGL_NO_RESET_NOTIFICATION_EXT)
+                    return egl::error(EGL_BAD_ATTRIBUTE, EGL_NO_CONTEXT);
+                break;
+              default:
+                return egl::error(EGL_BAD_ATTRIBUTE, EGL_NO_CONTEXT);
             }
         }
+    }
 
-        if (client_version != 2)
-        {
-            return egl::error(EGL_BAD_CONFIG, EGL_NO_CONTEXT);
-        }
+    if (client_version != 2 && client_version != 3)
+    {
+        return egl::error(EGL_BAD_CONFIG, EGL_NO_CONTEXT);
+    }
 
-        gl::Context *sharedContextPtr = (share_context != EGL_NO_CONTEXT ? static_cast<gl::Context*>(share_context) : NULL);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
 
-        if (sharedContextPtr != NULL && sharedContextPtr->isResetNotificationEnabled() != reset_notification)
+    if (share_context)
+    {
+        gl::Context* sharedGLContext = static_cast<gl::Context*>(share_context);
+
+        if (sharedGLContext->isResetNotificationEnabled() != reset_notification)
         {
             return egl::error(EGL_BAD_MATCH, EGL_NO_CONTEXT);
         }
 
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-
-        // Can not share contexts between displays
-        if (sharedContextPtr != NULL && sharedContextPtr->getRenderer() != display->getRenderer())
+        if (sharedGLContext->getClientVersion() != client_version)
         {
-            return egl::error(EGL_BAD_MATCH, EGL_NO_CONTEXT);
+            return egl::error(EGL_BAD_CONTEXT, EGL_NO_CONTEXT);
         }
 
-        if (!validateConfig(display, config))
+        // Can not share contexts between displays
+        if (sharedGLContext->getRenderer() != display->getRenderer())
         {
-            return EGL_NO_CONTEXT;
+            return egl::error(EGL_BAD_MATCH, EGL_NO_CONTEXT);
         }
-
-        EGLContext context = display->createContext(config, static_cast<gl::Context*>(share_context), reset_notification, robust_access);
-
-        if (context)
-            return egl::success(context);
-        else
-            return egl::error(EGL_CONTEXT_LOST, EGL_NO_CONTEXT);
     }
-    catch(std::bad_alloc&)
+
+    if (!validateConfig(display, config))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_CONTEXT);
+        return EGL_NO_CONTEXT;
     }
+
+    return display->createContext(config, client_version, static_cast<gl::Context*>(share_context), reset_notification, robust_access);
 }
 
 EGLBoolean __stdcall eglDestroyContext(EGLDisplay dpy, EGLContext ctx)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLContext ctx = 0x%0.8p)", dpy, ctx);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        gl::Context *context = static_cast<gl::Context*>(ctx);
-
-        if (!validateContext(display, context))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    gl::Context *context = static_cast<gl::Context*>(ctx);
 
-        if (ctx == EGL_NO_CONTEXT)
-        {
-            return egl::error(EGL_BAD_CONTEXT, EGL_FALSE);
-        }
-
-        display->destroyContext(context);
-
-        return egl::success(EGL_TRUE);
+    if (!validateContext(display, context))
+    {
+        return EGL_FALSE;
     }
-    catch(std::bad_alloc&)
+
+    if (ctx == EGL_NO_CONTEXT)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_BAD_CONTEXT, EGL_FALSE);
     }
+
+    display->destroyContext(context);
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLBoolean __stdcall eglMakeCurrent(EGLDisplay dpy, EGLSurface draw, EGLSurface read, EGLContext ctx)
@@ -888,95 +825,81 @@ EGLBoolean __stdcall eglMakeCurrent(EGLDisplay dpy, EGLSurface draw, EGLSurface
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface draw = 0x%0.8p, EGLSurface read = 0x%0.8p, EGLContext ctx = 0x%0.8p)",
           dpy, draw, read, ctx);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        gl::Context *context = static_cast<gl::Context*>(ctx);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    gl::Context *context = static_cast<gl::Context*>(ctx);
 
-        if (ctx != EGL_NO_CONTEXT && !validateContext(display, context))
-        {
-            return EGL_FALSE;
-        }
-
-        if (dpy != EGL_NO_DISPLAY)
-        {
-            rx::Renderer *renderer = display->getRenderer();
-            if (renderer->testDeviceLost(true))
-            {
-                return EGL_FALSE;
-            }
+    bool noContext = (ctx == EGL_NO_CONTEXT);
+    bool noSurface = (draw == EGL_NO_SURFACE || read == EGL_NO_SURFACE);
+    if (noContext != noSurface)
+    {
+        return egl::error(EGL_BAD_MATCH, EGL_FALSE);
+    }
 
-            if (renderer->isDeviceLost())
-            {
-                return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
-            }
-        }
+    if (ctx != EGL_NO_CONTEXT && !validateContext(display, context))
+    {
+        return EGL_FALSE;
+    }
 
-        if ((draw != EGL_NO_SURFACE && !validateSurface(display, static_cast<egl::Surface*>(draw))) ||
-            (read != EGL_NO_SURFACE && !validateSurface(display, static_cast<egl::Surface*>(read))))
+    if (dpy != EGL_NO_DISPLAY && display->isInitialized())
+    {
+        rx::Renderer *renderer = display->getRenderer();
+        if (renderer->testDeviceLost(true))
         {
             return EGL_FALSE;
         }
 
-        if (draw != read)
+        if (renderer->isDeviceLost())
         {
-            UNIMPLEMENTED();   // FIXME
+            return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
         }
+    }
 
-        egl::setCurrentDisplay(dpy);
-        egl::setCurrentDrawSurface(draw);
-        egl::setCurrentReadSurface(read);
-
-        glMakeCurrent(context, display, static_cast<egl::Surface*>(draw));
-
-        return egl::success(EGL_TRUE);
+    if ((draw != EGL_NO_SURFACE && !validateSurface(display, static_cast<egl::Surface*>(draw))) ||
+        (read != EGL_NO_SURFACE && !validateSurface(display, static_cast<egl::Surface*>(read))))
+    {
+        return EGL_FALSE;
     }
-    catch(std::bad_alloc&)
+
+    if (draw != read)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        UNIMPLEMENTED();   // FIXME
     }
+
+    egl::setCurrentDisplay(dpy);
+    egl::setCurrentDrawSurface(draw);
+    egl::setCurrentReadSurface(read);
+
+    glMakeCurrent(context, display, static_cast<egl::Surface*>(draw));
+
+    return egl::success(EGL_TRUE);
 }
 
 EGLContext __stdcall eglGetCurrentContext(void)
 {
     EVENT("()");
 
-    try
-    {
-        EGLContext context = glGetCurrentContext();
+    EGLContext context = glGetCurrentContext();
 
-        return egl::success(context);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_CONTEXT);
-    }
+    return egl::success(context);
 }
 
 EGLSurface __stdcall eglGetCurrentSurface(EGLint readdraw)
 {
     EVENT("(EGLint readdraw = %d)", readdraw);
 
-    try
+    if (readdraw == EGL_READ)
     {
-        if (readdraw == EGL_READ)
-        {
-            EGLSurface read = egl::getCurrentReadSurface();
-            return egl::success(read);
-        }
-        else if (readdraw == EGL_DRAW)
-        {
-            EGLSurface draw = egl::getCurrentDrawSurface();
-            return egl::success(draw);
-        }
-        else
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_NO_SURFACE);
-        }
+        EGLSurface read = egl::getCurrentReadSurface();
+        return egl::success(read);
     }
-    catch(std::bad_alloc&)
+    else if (readdraw == EGL_DRAW)
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_SURFACE);
+        EGLSurface draw = egl::getCurrentDrawSurface();
+        return egl::success(draw);
+    }
+    else
+    {
+        return egl::error(EGL_BAD_PARAMETER, EGL_NO_SURFACE);
     }
 }
 
@@ -984,16 +907,9 @@ EGLDisplay __stdcall eglGetCurrentDisplay(void)
 {
     EVENT("()");
 
-    try
-    {
-        EGLDisplay dpy = egl::getCurrentDisplay();
+    EGLDisplay dpy = egl::getCurrentDisplay();
 
-        return egl::success(dpy);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_NO_DISPLAY);
-    }
+    return egl::success(dpy);
 }
 
 EGLBoolean __stdcall eglQueryContext(EGLDisplay dpy, EGLContext ctx, EGLint attribute, EGLint *value)
@@ -1001,90 +917,62 @@ EGLBoolean __stdcall eglQueryContext(EGLDisplay dpy, EGLContext ctx, EGLint attr
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLContext ctx = 0x%0.8p, EGLint attribute = %d, EGLint *value = 0x%0.8p)",
           dpy, ctx, attribute, value);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        gl::Context *context = static_cast<gl::Context*>(ctx);
-
-        if (!validateContext(display, context))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    gl::Context *context = static_cast<gl::Context*>(ctx);
 
-        UNIMPLEMENTED();   // FIXME
-
-        return egl::success(0);
-    }
-    catch(std::bad_alloc&)
+    if (!validateContext(display, context))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return EGL_FALSE;
     }
+
+    UNIMPLEMENTED();   // FIXME
+
+    return egl::success(0);
 }
 
 EGLBoolean __stdcall eglWaitGL(void)
 {
     EVENT("()");
 
-    try
-    {
-        UNIMPLEMENTED();   // FIXME
+    UNIMPLEMENTED();   // FIXME
 
-        return egl::success(0);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(0);
 }
 
 EGLBoolean __stdcall eglWaitNative(EGLint engine)
 {
     EVENT("(EGLint engine = %d)", engine);
 
-    try
-    {
-        UNIMPLEMENTED();   // FIXME
+    UNIMPLEMENTED();   // FIXME
 
-        return egl::success(0);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
-    }
+    return egl::success(0);
 }
 
 EGLBoolean __stdcall eglSwapBuffers(EGLDisplay dpy, EGLSurface surface)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p)", dpy, surface);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = (egl::Surface*)surface;
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = (egl::Surface*)surface;
 
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
-
-        if (display->getRenderer()->isDeviceLost())
-        {
-            return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
-        }
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
+    }
 
-        if (surface == EGL_NO_SURFACE)
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
+    if (display->getRenderer()->isDeviceLost())
+    {
+        return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
+    }
 
-        if (eglSurface->swap())
-        {
-            return egl::success(EGL_TRUE);
-        }
+    if (surface == EGL_NO_SURFACE)
+    {
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
     }
-    catch(std::bad_alloc&)
+
+    if (eglSurface->swap())
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::success(EGL_TRUE);
     }
 
     return EGL_FALSE;
@@ -1094,68 +982,54 @@ EGLBoolean __stdcall eglCopyBuffers(EGLDisplay dpy, EGLSurface surface, EGLNativ
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLNativePixmapType target = 0x%0.8p)", dpy, surface, target);
 
-    try
-    {
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
 
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
-
-        if (display->getRenderer()->isDeviceLost())
-        {
-            return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
-        }
-
-        UNIMPLEMENTED();   // FIXME
-
-        return egl::success(0);
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
     }
-    catch(std::bad_alloc&)
+
+    if (display->getRenderer()->isDeviceLost())
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
     }
+
+    UNIMPLEMENTED();   // FIXME
+
+    return egl::success(0);
 }
 
 EGLBoolean __stdcall eglPostSubBufferNV(EGLDisplay dpy, EGLSurface surface, EGLint x, EGLint y, EGLint width, EGLint height)
 {
     EVENT("(EGLDisplay dpy = 0x%0.8p, EGLSurface surface = 0x%0.8p, EGLint x = %d, EGLint y = %d, EGLint width = %d, EGLint height = %d)", dpy, surface, x, y, width, height);
 
-    try
+    if (x < 0 || y < 0 || width < 0 || height < 0)
     {
-        if (x < 0 || y < 0 || width < 0 || height < 0)
-        {
-            return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
-        }
-
-        egl::Display *display = static_cast<egl::Display*>(dpy);
-        egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
+        return egl::error(EGL_BAD_PARAMETER, EGL_FALSE);
+    }
 
-        if (!validateSurface(display, eglSurface))
-        {
-            return EGL_FALSE;
-        }
+    egl::Display *display = static_cast<egl::Display*>(dpy);
+    egl::Surface *eglSurface = static_cast<egl::Surface*>(surface);
 
-        if (display->getRenderer()->isDeviceLost())
-        {
-            return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
-        }
+    if (!validateSurface(display, eglSurface))
+    {
+        return EGL_FALSE;
+    }
 
-        if (surface == EGL_NO_SURFACE)
-        {
-            return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
-        }
+    if (display->getRenderer()->isDeviceLost())
+    {
+        return egl::error(EGL_CONTEXT_LOST, EGL_FALSE);
+    }
 
-        if (eglSurface->postSubBuffer(x, y, width, height))
-        {
-            return egl::success(EGL_TRUE);
-        }
+    if (surface == EGL_NO_SURFACE)
+    {
+        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
     }
-    catch(std::bad_alloc&)
+
+    if (eglSurface->postSubBuffer(x, y, width, height))
     {
-        return egl::error(EGL_BAD_ALLOC, EGL_FALSE);
+        return egl::success(EGL_TRUE);
     }
 
     return EGL_FALSE;
@@ -1165,34 +1039,28 @@ __eglMustCastToProperFunctionPointerType __stdcall eglGetProcAddress(const char
 {
     EVENT("(const char *procname = \"%s\")", procname);
 
-    try
+    struct Extension
     {
-        struct Extension
-        {
-            const char *name;
-            __eglMustCastToProperFunctionPointerType address;
-        };
+        const char *name;
+        __eglMustCastToProperFunctionPointerType address;
+    };
 
-        static const Extension eglExtensions[] =
-        {
-            {"eglQuerySurfacePointerANGLE", (__eglMustCastToProperFunctionPointerType)eglQuerySurfacePointerANGLE},
-            {"eglPostSubBufferNV", (__eglMustCastToProperFunctionPointerType)eglPostSubBufferNV},
-            {"", NULL},
-        };
+    static const Extension eglExtensions[] =
+    {
+        { "eglQuerySurfacePointerANGLE", (__eglMustCastToProperFunctionPointerType)eglQuerySurfacePointerANGLE },
+        { "eglPostSubBufferNV", (__eglMustCastToProperFunctionPointerType)eglPostSubBufferNV },
+        { "eglGetPlatformDisplayEXT", (__eglMustCastToProperFunctionPointerType)eglGetPlatformDisplayEXT },
+        { "", NULL },
+    };
 
-        for (unsigned int ext = 0; ext < ArraySize(eglExtensions); ext++)
+    for (unsigned int ext = 0; ext < ArraySize(eglExtensions); ext++)
+    {
+        if (strcmp(procname, eglExtensions[ext].name) == 0)
         {
-            if (strcmp(procname, eglExtensions[ext].name) == 0)
-            {
-                return (__eglMustCastToProperFunctionPointerType)eglExtensions[ext].address;
-            }
+            return (__eglMustCastToProperFunctionPointerType)eglExtensions[ext].address;
         }
-
-        return glGetProcAddress(procname);
-    }
-    catch(std::bad_alloc&)
-    {
-        return egl::error(EGL_BAD_ALLOC, (__eglMustCastToProperFunctionPointerType)NULL);
     }
+
+    return glGetProcAddress(procname);
 }
 }
diff --git a/src/3rdparty/angle/src/libEGL/libEGL.def b/src/3rdparty/angle/src/libEGL/libEGL.def
index 71a5e67977..d7949d0354 100644
--- a/src/3rdparty/angle/src/libEGL/libEGL.def
+++ b/src/3rdparty/angle/src/libEGL/libEGL.def
@@ -1,36 +1,41 @@
-LIBRARY	libEGL
+LIBRARY libEGL
 EXPORTS
-	eglBindAPI                      @14
-	eglBindTexImage                 @20
-	eglChooseConfig                 @7
-	eglCopyBuffers                  @33
-	eglCreateContext                @23
-	eglCreatePbufferFromClientBuffer        @18
-	eglCreatePbufferSurface         @10
-	eglCreatePixmapSurface          @11
-	eglCreateWindowSurface          @9
-	eglDestroyContext               @24
-	eglDestroySurface               @12
-	eglGetConfigAttrib              @8
-	eglGetConfigs                   @6
-	eglGetCurrentContext            @26
-	eglGetCurrentDisplay            @28
-	eglGetCurrentSurface            @27
-	eglGetDisplay                   @2
-	eglGetError                     @1
-	eglGetProcAddress               @34
-	eglInitialize                   @3
-	eglMakeCurrent                  @25
-	eglQueryAPI                     @15
-	eglQueryContext                 @29
-	eglQueryString                  @5
-	eglQuerySurface                 @13
-	eglReleaseTexImage              @21
-	eglReleaseThread                @17
-	eglSurfaceAttrib                @19
-	eglSwapBuffers                  @32
-	eglSwapInterval                 @22
-	eglTerminate                    @4
-	eglWaitClient                   @16
-	eglWaitGL                       @30
-	eglWaitNative                   @31
\ No newline at end of file
+    eglBindAPI                       @14
+    eglBindTexImage                  @20
+    eglChooseConfig                  @7
+    eglCopyBuffers                   @33
+    eglCreateContext                 @23
+    eglCreatePbufferFromClientBuffer @18
+    eglCreatePbufferSurface          @10
+    eglCreatePixmapSurface           @11
+    eglCreateWindowSurface           @9
+    eglDestroyContext                @24
+    eglDestroySurface                @12
+    eglGetConfigAttrib               @8
+    eglGetConfigs                    @6
+    eglGetCurrentContext             @26
+    eglGetCurrentDisplay             @28
+    eglGetCurrentSurface             @27
+    eglGetDisplay                    @2
+    eglGetError                      @1
+    eglGetProcAddress                @34
+    eglInitialize                    @3
+    eglMakeCurrent                   @25
+    eglQueryAPI                      @15
+    eglQueryContext                  @29
+    eglQueryString                   @5
+    eglQuerySurface                  @13
+    eglReleaseTexImage               @21
+    eglReleaseThread                 @17
+    eglSurfaceAttrib                 @19
+    eglSwapBuffers                   @32
+    eglSwapInterval                  @22
+    eglTerminate                     @4
+    eglWaitClient                    @16
+    eglWaitGL                        @30
+    eglWaitNative                    @31
+
+    ; Extensions
+    eglGetPlatformDisplayEXT         @35
+    eglQuerySurfacePointerANGLE      @36
+    eglPostSubBufferNV               @37
diff --git a/src/3rdparty/angle/src/libEGL/libEGL_mingw32.def b/src/3rdparty/angle/src/libEGL/libEGL_mingw32.def
index 8128e7c4f0..492ad4d0cf 100644
--- a/src/3rdparty/angle/src/libEGL/libEGL_mingw32.def
+++ b/src/3rdparty/angle/src/libEGL/libEGL_mingw32.def
@@ -1,36 +1,41 @@
 LIBRARY libEGL
 EXPORTS
-	eglBindAPI@4                        @14
-	eglBindTexImage@12                  @20
-	eglChooseConfig@20                  @7
-	eglCopyBuffers@12                   @33
-	eglCreateContext@16                 @23
-	eglCreatePbufferFromClientBuffer@20 @18
-	eglCreatePbufferSurface@12          @10
-	eglCreatePixmapSurface@16           @11
-	eglCreateWindowSurface@16           @9
-	eglDestroyContext@8                 @24
-	eglDestroySurface@8                 @12
-	eglGetConfigAttrib@16               @8
-	eglGetConfigs@16                    @6
-	eglGetCurrentContext@0              @26
-	eglGetCurrentDisplay@0              @28
-	eglGetCurrentSurface@4              @27
-	eglGetDisplay@4                     @2
-	eglGetError@0                       @1
-	eglGetProcAddress@4                 @34
-	eglInitialize@12                    @3
-	eglMakeCurrent@16                   @25
-	eglQueryAPI@0                       @15
-	eglQueryContext@16                  @29
-	eglQueryString@8                    @5
-	eglQuerySurface@16                  @13
-	eglReleaseTexImage@12               @21
-	eglReleaseThread@0                  @17
-	eglSurfaceAttrib@16                 @19
-	eglSwapBuffers@8                    @32
-	eglSwapInterval@8                   @22
-	eglTerminate@4                      @4
-	eglWaitClient@0                     @16
-	eglWaitGL@0                         @30
-	eglWaitNative@4                     @31
+    eglBindAPI@4                        @14
+    eglBindTexImage@12                  @20
+    eglChooseConfig@20                  @7
+    eglCopyBuffers@12                   @33
+    eglCreateContext@16                 @23
+    eglCreatePbufferFromClientBuffer@20 @18
+    eglCreatePbufferSurface@12          @10
+    eglCreatePixmapSurface@16           @11
+    eglCreateWindowSurface@16           @9
+    eglDestroyContext@8                 @24
+    eglDestroySurface@8                 @12
+    eglGetConfigAttrib@16               @8
+    eglGetConfigs@16                    @6
+    eglGetCurrentContext@0              @26
+    eglGetCurrentDisplay@0              @28
+    eglGetCurrentSurface@4              @27
+    eglGetDisplay@4                     @2
+    eglGetError@0                       @1
+    eglGetProcAddress@4                 @34
+    eglInitialize@12                    @3
+    eglMakeCurrent@16                   @25
+    eglQueryAPI@0                       @15
+    eglQueryContext@16                  @29
+    eglQueryString@8                    @5
+    eglQuerySurface@16                  @13
+    eglReleaseTexImage@12               @21
+    eglReleaseThread@0                  @17
+    eglSurfaceAttrib@16                 @19
+    eglSwapBuffers@8                    @32
+    eglSwapInterval@8                   @22
+    eglTerminate@4                      @4
+    eglWaitClient@0                     @16
+    eglWaitGL@0                         @30
+    eglWaitNative@4                     @31
+
+    ; Extensions
+    eglGetPlatformDisplayEXT@12         @35
+    eglQuerySurfacePointerANGLE@16      @36
+    eglPostSubBufferNV@24               @37
diff --git a/src/3rdparty/angle/src/libEGL/libEGLd.def b/src/3rdparty/angle/src/libEGL/libEGLd.def
index 9317fce7de..0ebd27d0e1 100644
--- a/src/3rdparty/angle/src/libEGL/libEGLd.def
+++ b/src/3rdparty/angle/src/libEGL/libEGLd.def
@@ -1,36 +1,41 @@
-LIBRARY	libEGLd
+LIBRARY libEGLd
 EXPORTS
-	eglBindAPI                      @14
-	eglBindTexImage                 @20
-	eglChooseConfig                 @7
-	eglCopyBuffers                  @33
-	eglCreateContext                @23
-	eglCreatePbufferFromClientBuffer        @18
-	eglCreatePbufferSurface         @10
-	eglCreatePixmapSurface          @11
-	eglCreateWindowSurface          @9
-	eglDestroyContext               @24
-	eglDestroySurface               @12
-	eglGetConfigAttrib              @8
-	eglGetConfigs                   @6
-	eglGetCurrentContext            @26
-	eglGetCurrentDisplay            @28
-	eglGetCurrentSurface            @27
-	eglGetDisplay                   @2
-	eglGetError                     @1
-	eglGetProcAddress               @34
-	eglInitialize                   @3
-	eglMakeCurrent                  @25
-	eglQueryAPI                     @15
-	eglQueryContext                 @29
-	eglQueryString                  @5
-	eglQuerySurface                 @13
-	eglReleaseTexImage              @21
-	eglReleaseThread                @17
-	eglSurfaceAttrib                @19
-	eglSwapBuffers                  @32
-	eglSwapInterval                 @22
-	eglTerminate                    @4
-	eglWaitClient                   @16
-	eglWaitGL                       @30
-	eglWaitNative                   @31
+    eglBindAPI                       @14
+    eglBindTexImage                  @20
+    eglChooseConfig                  @7
+    eglCopyBuffers                   @33
+    eglCreateContext                 @23
+    eglCreatePbufferFromClientBuffer @18
+    eglCreatePbufferSurface          @10
+    eglCreatePixmapSurface           @11
+    eglCreateWindowSurface           @9
+    eglDestroyContext                @24
+    eglDestroySurface                @12
+    eglGetConfigAttrib               @8
+    eglGetConfigs                    @6
+    eglGetCurrentContext             @26
+    eglGetCurrentDisplay             @28
+    eglGetCurrentSurface             @27
+    eglGetDisplay                    @2
+    eglGetError                      @1
+    eglGetProcAddress                @34
+    eglInitialize                    @3
+    eglMakeCurrent                   @25
+    eglQueryAPI                      @15
+    eglQueryContext                  @29
+    eglQueryString                   @5
+    eglQuerySurface                  @13
+    eglReleaseTexImage               @21
+    eglReleaseThread                 @17
+    eglSurfaceAttrib                 @19
+    eglSwapBuffers                   @32
+    eglSwapInterval                  @22
+    eglTerminate                     @4
+    eglWaitClient                    @16
+    eglWaitGL                        @30
+    eglWaitNative                    @31
+
+    ; Extensions
+    eglGetPlatformDisplayEXT         @35
+    eglQuerySurfacePointerANGLE      @36
+    eglPostSubBufferNV               @37
diff --git a/src/3rdparty/angle/src/libEGL/libEGLd_mingw32.def b/src/3rdparty/angle/src/libEGL/libEGLd_mingw32.def
index 1c72413f89..ab0320dc0d 100644
--- a/src/3rdparty/angle/src/libEGL/libEGLd_mingw32.def
+++ b/src/3rdparty/angle/src/libEGL/libEGLd_mingw32.def
@@ -1,36 +1,41 @@
 LIBRARY libEGLd
 EXPORTS
-	eglBindAPI@4                        @14
-	eglBindTexImage@12                  @20
-	eglChooseConfig@20                  @7
-	eglCopyBuffers@12                   @33
-	eglCreateContext@16                 @23
-	eglCreatePbufferFromClientBuffer@20 @18
-	eglCreatePbufferSurface@12          @10
-	eglCreatePixmapSurface@16           @11
-	eglCreateWindowSurface@16           @9
-	eglDestroyContext@8                 @24
-	eglDestroySurface@8                 @12
-	eglGetConfigAttrib@16               @8
-	eglGetConfigs@16                    @6
-	eglGetCurrentContext@0              @26
-	eglGetCurrentDisplay@0              @28
-	eglGetCurrentSurface@4              @27
-	eglGetDisplay@4                     @2
-	eglGetError@0                       @1
-	eglGetProcAddress@4                 @34
-	eglInitialize@12                    @3
-	eglMakeCurrent@16                   @25
-	eglQueryAPI@0                       @15
-	eglQueryContext@16                  @29
-	eglQueryString@8                    @5
-	eglQuerySurface@16                  @13
-	eglReleaseTexImage@12               @21
-	eglReleaseThread@0                  @17
-	eglSurfaceAttrib@16                 @19
-	eglSwapBuffers@8                    @32
-	eglSwapInterval@8                   @22
-	eglTerminate@4                      @4
-	eglWaitClient@0                     @16
-	eglWaitGL@0                         @30
-	eglWaitNative@4                     @31
+    eglBindAPI@4                        @14
+    eglBindTexImage@12                  @20
+    eglChooseConfig@20                  @7
+    eglCopyBuffers@12                   @33
+    eglCreateContext@16                 @23
+    eglCreatePbufferFromClientBuffer@20 @18
+    eglCreatePbufferSurface@12          @10
+    eglCreatePixmapSurface@16           @11
+    eglCreateWindowSurface@16           @9
+    eglDestroyContext@8                 @24
+    eglDestroySurface@8                 @12
+    eglGetConfigAttrib@16               @8
+    eglGetConfigs@16                    @6
+    eglGetCurrentContext@0              @26
+    eglGetCurrentDisplay@0              @28
+    eglGetCurrentSurface@4              @27
+    eglGetDisplay@4                     @2
+    eglGetError@0                       @1
+    eglGetProcAddress@4                 @34
+    eglInitialize@12                    @3
+    eglMakeCurrent@16                   @25
+    eglQueryAPI@0                       @15
+    eglQueryContext@16                  @29
+    eglQueryString@8                    @5
+    eglQuerySurface@16                  @13
+    eglReleaseTexImage@12               @21
+    eglReleaseThread@0                  @17
+    eglSurfaceAttrib@16                 @19
+    eglSwapBuffers@8                    @32
+    eglSwapInterval@8                   @22
+    eglTerminate@4                      @4
+    eglWaitClient@0                     @16
+    eglWaitGL@0                         @30
+    eglWaitNative@4                     @31
+
+    ; Extensions
+    eglGetPlatformDisplayEXT@12         @35
+    eglQuerySurfacePointerANGLE@16      @36
+    eglPostSubBufferNV@24               @37
diff --git a/src/3rdparty/angle/src/libEGL/main.cpp b/src/3rdparty/angle/src/libEGL/main.cpp
index 4cdf5f0362..e74737eaba 100644
--- a/src/3rdparty/angle/src/libEGL/main.cpp
+++ b/src/3rdparty/angle/src/libEGL/main.cpp
@@ -1,4 +1,3 @@
-#include "../libGLESv2/precompiled.h"
 //
 // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -10,61 +9,57 @@
 #include "libEGL/main.h"
 
 #include "common/debug.h"
+#include "common/tls.h"
 
-#if !defined(ANGLE_OS_WINRT)
-static DWORD currentTLS = TLS_OUT_OF_INDEXES;
-#else
-static __declspec(thread) void *currentTLS = 0;
+#if defined(ANGLE_PLATFORM_WINRT)
+__declspec(thread)
 #endif
+static TLSIndex currentTLS = TLS_OUT_OF_INDEXES;
 
 namespace egl
 {
 
 Current *AllocateCurrent()
 {
-#if !defined(ANGLE_OS_WINRT)
-    Current *current = (egl::Current*)LocalAlloc(LPTR, sizeof(egl::Current));
-#else
-    currentTLS = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(Current));
-    Current *current = (egl::Current*)currentTLS;
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (currentTLS == TLS_OUT_OF_INDEXES)
+    {
+        currentTLS = CreateTLSIndex();
+    }
 #endif
-
-    if (!current)
+    ASSERT(currentTLS != TLS_OUT_OF_INDEXES);
+    if (currentTLS == TLS_OUT_OF_INDEXES)
     {
-        ERR("Could not allocate thread local storage.");
         return NULL;
     }
 
-#if !defined(ANGLE_OS_WINRT)
-    ASSERT(currentTLS != TLS_OUT_OF_INDEXES);
-    TlsSetValue(currentTLS, current);
-#endif
-
+    Current *current = new Current();
     current->error = EGL_SUCCESS;
     current->API = EGL_OPENGL_ES_API;
     current->display = EGL_NO_DISPLAY;
     current->drawSurface = EGL_NO_SURFACE;
     current->readSurface = EGL_NO_SURFACE;
 
+    if (!SetTLSValue(currentTLS, current))
+    {
+        ERR("Could not set thread local storage.");
+        return NULL;
+    }
+
     return current;
 }
 
 void DeallocateCurrent()
 {
-#if !defined(ANGLE_OS_WINRT)
-    void *current = TlsGetValue(currentTLS);
-
-    if (current)
-    {
-        LocalFree((HLOCAL)current);
-    }
-#else
-    if (currentTLS)
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (currentTLS == TLS_OUT_OF_INDEXES)
     {
-        HeapFree(GetProcessHeap(), 0, currentTLS);
-        currentTLS = 0;
+        return;
     }
 #endif
+    Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
+    SafeDelete(current);
+    SetTLSValue(currentTLS, NULL);
 }
 
 }
@@ -91,16 +86,18 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
                 }
             }
 #endif
-#if !defined(ANGLE_OS_WINRT)
-            currentTLS = TlsAlloc();
 
+#if defined(ANGLE_PLATFORM_WINRT) // On WinRT, don't handle TLS from DllMain
+            return DisableThreadLibraryCalls(instance);
+#endif
+
+            currentTLS = CreateTLSIndex();
             if (currentTLS == TLS_OUT_OF_INDEXES)
             {
                 return FALSE;
             }
-#endif
         }
-        // Fall throught to initialize index
+        // Fall through to initialize index
       case DLL_THREAD_ATTACH:
         {
             egl::AllocateCurrent();
@@ -108,15 +105,15 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
         break;
       case DLL_THREAD_DETACH:
         {
+#if !defined(ANGLE_PLATFORM_WINRT)
             egl::DeallocateCurrent();
+#endif
         }
         break;
       case DLL_PROCESS_DETACH:
         {
             egl::DeallocateCurrent();
-#if !defined(ANGLE_OS_WINRT)
-            TlsFree(currentTLS);
-#endif
+            DestroyTLSIndex(currentTLS);
         }
         break;
       default:
@@ -134,20 +131,16 @@ namespace egl
 Current *GetCurrentData()
 {
 #ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-#if !defined(ANGLE_OS_WINRT)
-    Current *current = (Current*)TlsGetValue(currentTLS);
-#else
-    Current *current = (Current*)currentTLS;
-#endif
-#else
-    // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
-    static Current s_current = { EGL_SUCCESS, EGL_OPENGL_ES_API, EGL_NO_DISPLAY, EGL_NO_SURFACE, EGL_NO_SURFACE };
-    Current *current = &s_current;
-#endif
+    Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
 
     // ANGLE issue 488: when the dll is loaded after thread initialization,
     // thread local storage (current) might not exist yet.
     return (current ? current : AllocateCurrent());
+#else
+    // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
+    static Current current = { EGL_SUCCESS, EGL_OPENGL_ES_API, EGL_NO_DISPLAY, EGL_NO_SURFACE, EGL_NO_SURFACE };
+    return &current;
+#endif
 }
 
 void setCurrentError(EGLint error)
diff --git a/src/3rdparty/angle/src/libEGL/main.h b/src/3rdparty/angle/src/libEGL/main.h
index 77da8f0f8e..07f5b9e675 100644
--- a/src/3rdparty/angle/src/libEGL/main.h
+++ b/src/3rdparty/angle/src/libEGL/main.h
@@ -9,7 +9,6 @@
 #ifndef LIBEGL_MAIN_H_
 #define LIBEGL_MAIN_H_
 
-#define EGLAPI
 #include <EGL/egl.h>
 #include <EGL/eglext.h>
 
diff --git a/src/3rdparty/angle/src/libGLESv2/BinaryStream.h b/src/3rdparty/angle/src/libGLESv2/BinaryStream.h
index 21c2f86ce8..4d7dde04e1 100644
--- a/src/3rdparty/angle/src/libGLESv2/BinaryStream.h
+++ b/src/3rdparty/angle/src/libGLESv2/BinaryStream.h
@@ -10,6 +10,11 @@
 #define LIBGLESV2_BINARYSTREAM_H_
 
 #include "common/angleutils.h"
+#include "common/mathutil.h"
+
+#include <cstddef>
+#include <string>
+#include <vector>
 
 namespace gl
 {
@@ -25,42 +30,49 @@ class BinaryInputStream
         mLength = length;
     }
 
-    template <typename T>
-    void read(T *v, size_t num)
+    // readInt will generate an error for bool types
+    template <class IntT>
+    IntT readInt()
     {
-        union
-        {
-            T dummy;  // Compilation error for non-trivial types
-        } dummy;
-        (void) dummy;
+        int value;
+        read(&value);
+        return static_cast<IntT>(value);
+    }
 
-        if (mError)
-        {
-            return;
-        }
+    template <class IntT>
+    void readInt(IntT *outValue)
+    {
+        *outValue = readInt<IntT>();
+    }
 
-        size_t length = num * sizeof(T);
+    bool readBool()
+    {
+        int value;
+        read(&value);
+        return (value > 0);
+    }
 
-        if (mOffset + length > mLength)
-        {
-            mError = true;
-            return;
-        }
+    void readBool(bool *outValue)
+    {
+        *outValue = readBool();
+    }
 
-        memcpy(v, mData + mOffset, length);
-        mOffset += length;
+    void readBytes(unsigned char outArray[], size_t count)
+    {
+        read<unsigned char>(outArray, count);
     }
 
-    template <typename T>
-    void read(T * v)
+    std::string readString()
     {
-        read(v, 1);
+        std::string outString;
+        readString(&outString);
+        return outString;
     }
 
-    void read(std::string *v)
+    void readString(std::string *v)
     {
         size_t length;
-        read(&length);
+        readInt(&length);
 
         if (mError)
         {
@@ -109,6 +121,30 @@ class BinaryInputStream
     size_t mOffset;
     const char *mData;
     size_t mLength;
+
+    template <typename T>
+    void read(T *v, size_t num)
+    {
+        META_ASSERT(std::is_fundamental<T>::value);
+
+        size_t length = num * sizeof(T);
+
+        if (mOffset + length > mLength)
+        {
+            mError = true;
+            return;
+        }
+
+        memcpy(v, mData + mOffset, length);
+        mOffset += length;
+    }
+
+    template <typename T>
+    void read(T *v)
+    {
+        read(v, 1);
+    }
+
 };
 
 class BinaryOutputStream
@@ -118,31 +154,24 @@ class BinaryOutputStream
     {
     }
 
-    template <typename T>
-    void write(const T *v, size_t num)
+    // writeInt also handles bool types
+    template <class IntT>
+    void writeInt(IntT param)
     {
-        union
-        {
-            T dummy;  // Compilation error for non-trivial types
-        } dummy;
-        (void) dummy;
-
-        const char *asBytes = reinterpret_cast<const char*>(v);
-        mData.insert(mData.end(), asBytes, asBytes + num * sizeof(T));
+        ASSERT(rx::IsIntegerCastSafe<int>(param));
+        int intValue = static_cast<int>(param);
+        write(&intValue, 1);
     }
 
-    template <typename T>
-    void write(const T &v)
+    void writeString(const std::string &v)
     {
-        write(&v, 1);
+        writeInt(v.length());
+        write(v.c_str(), v.length());
     }
 
-    void write(const std::string &v)
+    void writeBytes(const unsigned char *bytes, size_t count)
     {
-        size_t length = v.length();
-        write(length);
-
-        write(v.c_str(), length);
+        write(bytes, count);
     }
 
     size_t length() const
@@ -158,6 +187,15 @@ class BinaryOutputStream
   private:
     DISALLOW_COPY_AND_ASSIGN(BinaryOutputStream);
     std::vector<char> mData;
+
+    template <typename T>
+    void write(const T *v, size_t num)
+    {
+        META_ASSERT(std::is_fundamental<T>::value);
+        const char *asBytes = reinterpret_cast<const char*>(v);
+        mData.insert(mData.end(), asBytes, asBytes + num * sizeof(T));
+    }
+
 };
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/Buffer.cpp b/src/3rdparty/angle/src/libGLESv2/Buffer.cpp
index c007d5d9e9..3b2a1a912a 100644
--- a/src/3rdparty/angle/src/libGLESv2/Buffer.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Buffer.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,117 +9,120 @@
 // [OpenGL ES 2.0.24] section 2.9 page 21.
 
 #include "libGLESv2/Buffer.h"
-
-#include "libGLESv2/renderer/VertexBuffer.h"
-#include "libGLESv2/renderer/IndexBuffer.h"
-#include "libGLESv2/renderer/BufferStorage.h"
+#include "libGLESv2/renderer/BufferImpl.h"
 #include "libGLESv2/renderer/Renderer.h"
 
 namespace gl
 {
 
-Buffer::Buffer(rx::Renderer *renderer, GLuint id) : RefCountObject(id)
+Buffer::Buffer(rx::BufferImpl *impl, GLuint id)
+    : RefCountObject(id),
+      mBuffer(impl),
+      mUsage(GL_DYNAMIC_DRAW),
+      mSize(0),
+      mAccessFlags(0),
+      mMapped(GL_FALSE),
+      mMapPointer(NULL),
+      mMapOffset(0),
+      mMapLength(0)
 {
-    mRenderer = renderer;
-    mUsage = GL_DYNAMIC_DRAW;
-
-    mBufferStorage = renderer->createBufferStorage();
-    mStaticVertexBuffer = NULL;
-    mStaticIndexBuffer = NULL;
-    mUnmodifiedDataUse = 0;
 }
 
 Buffer::~Buffer()
 {
-    delete mBufferStorage;
-    delete mStaticVertexBuffer;
-    delete mStaticIndexBuffer;
+    SafeDelete(mBuffer);
 }
 
-void Buffer::bufferData(const void *data, GLsizeiptr size, GLenum usage)
+Error Buffer::bufferData(const void *data, GLsizeiptr size, GLenum usage)
 {
-    mBufferStorage->clear();
-    mIndexRangeCache.clear();
-    mBufferStorage->setData(data, size, 0);
+    gl::Error error = mBuffer->setData(data, size, usage);
+    if (error.isError())
+    {
+        return error;
+    }
 
+    mIndexRangeCache.clear();
     mUsage = usage;
+    mSize = size;
 
-    invalidateStaticData();
-
-    if (usage == GL_STATIC_DRAW)
-    {
-        mStaticVertexBuffer = new rx::StaticVertexBufferInterface(mRenderer);
-        mStaticIndexBuffer = new rx::StaticIndexBufferInterface(mRenderer);
-    }
+    return error;
 }
 
-void Buffer::bufferSubData(const void *data, GLsizeiptr size, GLintptr offset)
+Error Buffer::bufferSubData(const void *data, GLsizeiptr size, GLintptr offset)
 {
-    mBufferStorage->setData(data, size, offset);
-    mIndexRangeCache.invalidateRange(offset, size);
-
-    if ((mStaticVertexBuffer && mStaticVertexBuffer->getBufferSize() != 0) || (mStaticIndexBuffer && mStaticIndexBuffer->getBufferSize() != 0))
+    gl::Error error = mBuffer->setSubData(data, size, offset);
+    if (error.isError())
     {
-        invalidateStaticData();
+        return error;
     }
 
-    mUnmodifiedDataUse = 0;
-}
+    mIndexRangeCache.invalidateRange(offset, size);
 
-rx::BufferStorage *Buffer::getStorage() const
-{
-    return mBufferStorage;
+    return error;
 }
 
-unsigned int Buffer::size() const
+Error Buffer::copyBufferSubData(Buffer* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size)
 {
-    return mBufferStorage->getSize();
-}
+    gl::Error error = mBuffer->copySubData(source->getImplementation(), sourceOffset, destOffset, size);
+    if (error.isError())
+    {
+        return error;
+    }
 
-GLenum Buffer::usage() const
-{
-    return mUsage;
-}
+    mIndexRangeCache.invalidateRange(destOffset, size);
 
-rx::StaticVertexBufferInterface *Buffer::getStaticVertexBuffer()
-{
-    return mStaticVertexBuffer;
+    return error;
 }
 
-rx::StaticIndexBufferInterface *Buffer::getStaticIndexBuffer()
+Error Buffer::mapRange(GLintptr offset, GLsizeiptr length, GLbitfield access)
 {
-    return mStaticIndexBuffer;
-}
+    ASSERT(!mMapped);
+    ASSERT(offset + length <= mSize);
 
-void Buffer::invalidateStaticData()
-{
-    delete mStaticVertexBuffer;
-    mStaticVertexBuffer = NULL;
+    Error error = mBuffer->map(offset, length, access, &mMapPointer);
+    if (error.isError())
+    {
+        mMapPointer = NULL;
+        return error;
+    }
 
-    delete mStaticIndexBuffer;
-    mStaticIndexBuffer = NULL;
+    mMapped = GL_TRUE;
+    mMapOffset = static_cast<GLint64>(offset);
+    mMapLength = static_cast<GLint64>(length);
+    mAccessFlags = static_cast<GLint>(access);
 
-    mUnmodifiedDataUse = 0;
+    if ((access & GL_MAP_WRITE_BIT) > 0)
+    {
+        mIndexRangeCache.invalidateRange(offset, length);
+    }
+
+    return error;
 }
 
-// Creates static buffers if sufficient used data has been left unmodified
-void Buffer::promoteStaticUsage(int dataSize)
+Error Buffer::unmap()
 {
-    if (!mStaticVertexBuffer && !mStaticIndexBuffer)
-    {
-        mUnmodifiedDataUse += dataSize;
+    ASSERT(mMapped);
 
-        if (mUnmodifiedDataUse > 3 * mBufferStorage->getSize())
-        {
-            mStaticVertexBuffer = new rx::StaticVertexBufferInterface(mRenderer);
-            mStaticIndexBuffer = new rx::StaticIndexBufferInterface(mRenderer);
-        }
+    Error error = mBuffer->unmap();
+    if (error.isError())
+    {
+        return error;
     }
+
+    mMapped = GL_FALSE;
+    mMapPointer = NULL;
+    mMapOffset = 0;
+    mMapLength = 0;
+    mAccessFlags = 0;
+
+    return error;
 }
 
-rx::IndexRangeCache *Buffer::getIndexRangeCache()
+void Buffer::markTransformFeedbackUsage()
 {
-    return &mIndexRangeCache;
+    // TODO: Only used by the DX11 backend. Refactor to a more appropriate place.
+    mBuffer->markTransformFeedbackUsage();
+    mIndexRangeCache.clear();
 }
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Buffer.h b/src/3rdparty/angle/src/libGLESv2/Buffer.h
index 4048f4b906..35a6767502 100644
--- a/src/3rdparty/angle/src/libGLESv2/Buffer.h
+++ b/src/3rdparty/angle/src/libGLESv2/Buffer.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,6 +11,8 @@
 #ifndef LIBGLESV2_BUFFER_H_
 #define LIBGLESV2_BUFFER_H_
 
+#include "libGLESv2/Error.h"
+
 #include "common/angleutils.h"
 #include "common/RefCountObject.h"
 #include "libGLESv2/renderer/IndexRangeCache.h"
@@ -18,9 +20,7 @@
 namespace rx
 {
 class Renderer;
-class BufferStorage;
-class StaticIndexBufferInterface;
-class StaticVertexBufferInterface;
+class BufferImpl;
 };
 
 namespace gl
@@ -29,38 +29,45 @@ namespace gl
 class Buffer : public RefCountObject
 {
   public:
-    Buffer(rx::Renderer *renderer, GLuint id);
+    Buffer(rx::BufferImpl *impl, GLuint id);
 
     virtual ~Buffer();
 
-    void bufferData(const void *data, GLsizeiptr size, GLenum usage);
-    void bufferSubData(const void *data, GLsizeiptr size, GLintptr offset);
+    Error bufferData(const void *data, GLsizeiptr size, GLenum usage);
+    Error bufferSubData(const void *data, GLsizeiptr size, GLintptr offset);
+    Error copyBufferSubData(Buffer* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size);
+    Error mapRange(GLintptr offset, GLsizeiptr length, GLbitfield access);
+    Error unmap();
 
-    GLenum usage() const;
+    GLenum getUsage() const { return mUsage; }
+    GLint getAccessFlags() const {  return mAccessFlags; }
+    GLboolean isMapped() const { return mMapped; }
+    GLvoid *getMapPointer() const { return mMapPointer; }
+    GLint64 getMapOffset() const { return mMapOffset; }
+    GLint64 getMapLength() const { return mMapLength; }
+    GLint64 getSize() const { return mSize; }
 
-    rx::BufferStorage *getStorage() const;
-    unsigned int size() const;
+    rx::BufferImpl *getImplementation() const { return mBuffer; }
 
-    rx::StaticVertexBufferInterface *getStaticVertexBuffer();
-    rx::StaticIndexBufferInterface *getStaticIndexBuffer();
-    void invalidateStaticData();
-    void promoteStaticUsage(int dataSize);
+    void markTransformFeedbackUsage();
 
-    rx::IndexRangeCache *getIndexRangeCache();
+    rx::IndexRangeCache *getIndexRangeCache() { return &mIndexRangeCache; }
+    const rx::IndexRangeCache *getIndexRangeCache() const { return &mIndexRangeCache; }
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Buffer);
 
-    rx::Renderer *mRenderer;
-    GLenum mUsage;
+    rx::BufferImpl *mBuffer;
 
-    rx::BufferStorage *mBufferStorage;
+    GLenum mUsage;
+    GLint64 mSize;
+    GLint mAccessFlags;
+    GLboolean mMapped;
+    GLvoid *mMapPointer;
+    GLint64 mMapOffset;
+    GLint64 mMapLength;
 
     rx::IndexRangeCache mIndexRangeCache;
-
-    rx::StaticVertexBufferInterface *mStaticVertexBuffer;
-    rx::StaticIndexBufferInterface *mStaticIndexBuffer;
-    unsigned int mUnmodifiedDataUse;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Caps.cpp b/src/3rdparty/angle/src/libGLESv2/Caps.cpp
new file mode 100644
index 0000000000..983800c0e6
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/Caps.cpp
@@ -0,0 +1,425 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "libGLESv2/Caps.h"
+#include "common/debug.h"
+#include "common/angleutils.h"
+
+#include "angle_gl.h"
+
+#include <algorithm>
+#include <sstream>
+
+namespace gl
+{
+
+TextureCaps::TextureCaps()
+    : texturable(false),
+      filterable(false),
+      renderable(false),
+      sampleCounts()
+{
+}
+
+GLuint TextureCaps::getMaxSamples() const
+{
+    return !sampleCounts.empty() ? *sampleCounts.rbegin() : 0;
+}
+
+GLuint TextureCaps::getNearestSamples(GLuint requestedSamples) const
+{
+    if (requestedSamples == 0)
+    {
+        return 0;
+    }
+
+    for (SupportedSampleSet::const_iterator i = sampleCounts.begin(); i != sampleCounts.end(); i++)
+    {
+        GLuint samples = *i;
+        if (samples >= requestedSamples)
+        {
+            return samples;
+        }
+    }
+
+    return 0;
+}
+
+void TextureCapsMap::insert(GLenum internalFormat, const TextureCaps &caps)
+{
+    mCapsMap.insert(std::make_pair(internalFormat, caps));
+}
+
+void TextureCapsMap::remove(GLenum internalFormat)
+{
+    InternalFormatToCapsMap::iterator i = mCapsMap.find(internalFormat);
+    if (i != mCapsMap.end())
+    {
+        mCapsMap.erase(i);
+    }
+}
+
+const TextureCaps &TextureCapsMap::get(GLenum internalFormat) const
+{
+    static TextureCaps defaultUnsupportedTexture;
+    InternalFormatToCapsMap::const_iterator iter = mCapsMap.find(internalFormat);
+    return (iter != mCapsMap.end()) ? iter->second : defaultUnsupportedTexture;
+}
+
+TextureCapsMap::const_iterator TextureCapsMap::begin() const
+{
+    return mCapsMap.begin();
+}
+
+TextureCapsMap::const_iterator TextureCapsMap::end() const
+{
+    return mCapsMap.end();
+}
+
+size_t TextureCapsMap::size() const
+{
+    return mCapsMap.size();
+}
+
+Extensions::Extensions()
+    : elementIndexUint(false),
+      packedDepthStencil(false),
+      getProgramBinary(false),
+      rgb8rgba8(false),
+      textureFormatBGRA8888(false),
+      readFormatBGRA(false),
+      pixelBufferObject(false),
+      mapBuffer(false),
+      mapBufferRange(false),
+      textureHalfFloat(false),
+      textureHalfFloatLinear(false),
+      textureFloat(false),
+      textureFloatLinear(false),
+      textureRG(false),
+      textureCompressionDXT1(false),
+      textureCompressionDXT3(false),
+      textureCompressionDXT5(false),
+      depthTextures(false),
+      textureNPOT(false),
+      drawBuffers(false),
+      textureStorage(false),
+      textureFilterAnisotropic(false),
+      maxTextureAnisotropy(false),
+      occlusionQueryBoolean(false),
+      fence(false),
+      timerQuery(false),
+      robustness(false),
+      blendMinMax(false),
+      framebufferBlit(false),
+      framebufferMultisample(false),
+      instancedArrays(false),
+      packReverseRowOrder(false),
+      standardDerivatives(false),
+      shaderTextureLOD(false),
+      fragDepth(false),
+      textureUsage(false),
+      translatedShaderSource(false),
+      colorBufferFloat(false)
+{
+}
+
+static void InsertExtensionString(const std::string &extension, bool supported, std::vector<std::string> *extensionVector)
+{
+    if (supported)
+    {
+        extensionVector->push_back(extension);
+    }
+}
+
+std::vector<std::string> Extensions::getStrings() const
+{
+    std::vector<std::string> extensionStrings;
+
+    //                   | Extension name                     | Supported flag          | Output vector   |
+    InsertExtensionString("GL_OES_element_index_uint",         elementIndexUint,         &extensionStrings);
+    InsertExtensionString("GL_OES_packed_depth_stencil",       packedDepthStencil,       &extensionStrings);
+    InsertExtensionString("GL_OES_get_program_binary",         getProgramBinary,         &extensionStrings);
+    InsertExtensionString("GL_OES_rgb8_rgba8",                 rgb8rgba8,                &extensionStrings);
+    InsertExtensionString("GL_EXT_texture_format_BGRA8888",    textureFormatBGRA8888,    &extensionStrings);
+    InsertExtensionString("GL_EXT_read_format_bgra",           readFormatBGRA,           &extensionStrings);
+    InsertExtensionString("GL_NV_pixel_buffer_object",         pixelBufferObject,        &extensionStrings);
+    InsertExtensionString("GL_OES_mapbuffer",                  mapBuffer,                &extensionStrings);
+    InsertExtensionString("GL_EXT_map_buffer_range",           mapBufferRange,           &extensionStrings);
+    InsertExtensionString("GL_OES_texture_half_float",         textureHalfFloat,         &extensionStrings);
+    InsertExtensionString("GL_OES_texture_half_float_linear",  textureHalfFloatLinear,   &extensionStrings);
+    InsertExtensionString("GL_OES_texture_float",              textureFloat,             &extensionStrings);
+    InsertExtensionString("GL_OES_texture_float_linear",       textureFloatLinear,       &extensionStrings);
+    InsertExtensionString("GL_EXT_texture_rg",                 textureRG,                &extensionStrings);
+    InsertExtensionString("GL_EXT_texture_compression_dxt1",   textureCompressionDXT1,   &extensionStrings);
+    InsertExtensionString("GL_ANGLE_texture_compression_dxt3", textureCompressionDXT3,   &extensionStrings);
+    InsertExtensionString("GL_ANGLE_texture_compression_dxt5", textureCompressionDXT5,   &extensionStrings);
+    InsertExtensionString("GL_EXT_sRGB",                       sRGB,                     &extensionStrings);
+    InsertExtensionString("GL_ANGLE_depth_texture",            depthTextures,            &extensionStrings);
+    InsertExtensionString("GL_EXT_texture_storage",            textureStorage,           &extensionStrings);
+    InsertExtensionString("GL_OES_texture_npot",               textureNPOT,              &extensionStrings);
+    InsertExtensionString("GL_EXT_draw_buffers",               drawBuffers,              &extensionStrings);
+    InsertExtensionString("GL_EXT_texture_filter_anisotropic", textureFilterAnisotropic, &extensionStrings);
+    InsertExtensionString("GL_EXT_occlusion_query_boolean",    occlusionQueryBoolean,    &extensionStrings);
+    InsertExtensionString("GL_NV_fence",                       fence,                    &extensionStrings);
+    InsertExtensionString("GL_ANGLE_timer_query",              timerQuery,               &extensionStrings);
+    InsertExtensionString("GL_EXT_robustness",                 robustness,               &extensionStrings);
+    InsertExtensionString("GL_EXT_blend_minmax",               blendMinMax,              &extensionStrings);
+    InsertExtensionString("GL_ANGLE_framebuffer_blit",         framebufferBlit,          &extensionStrings);
+    InsertExtensionString("GL_ANGLE_framebuffer_multisample",  framebufferMultisample,   &extensionStrings);
+    InsertExtensionString("GL_ANGLE_instanced_arrays",         instancedArrays,          &extensionStrings);
+    InsertExtensionString("GL_ANGLE_pack_reverse_row_order",   packReverseRowOrder,      &extensionStrings);
+    InsertExtensionString("GL_OES_standard_derivatives",       standardDerivatives,      &extensionStrings);
+    InsertExtensionString("GL_EXT_shader_texture_lod",         shaderTextureLOD,         &extensionStrings);
+    InsertExtensionString("GL_EXT_frag_depth",                 fragDepth,                &extensionStrings);
+    InsertExtensionString("GL_ANGLE_texture_usage",            textureUsage,             &extensionStrings);
+    InsertExtensionString("GL_ANGLE_translated_shader_source", translatedShaderSource,   &extensionStrings);
+    InsertExtensionString("GL_EXT_color_buffer_float",         colorBufferFloat,         &extensionStrings);
+
+    return extensionStrings;
+}
+
+static bool GetFormatSupport(const TextureCapsMap &textureCaps, const std::vector<GLenum> &requiredFormats,
+                             bool requiresTexturing, bool requiresFiltering, bool requiresRendering)
+{
+    for (size_t i = 0; i < requiredFormats.size(); i++)
+    {
+        const TextureCaps &cap = textureCaps.get(requiredFormats[i]);
+
+        if (requiresTexturing && !cap.texturable)
+        {
+            return false;
+        }
+
+        if (requiresFiltering && !cap.filterable)
+        {
+            return false;
+        }
+
+        if (requiresRendering && !cap.renderable)
+        {
+            return false;
+        }
+    }
+
+    return true;
+}
+
+// Checks for GL_OES_rgb8_rgba8 support
+static bool DetermineRGB8AndRGBA8TextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_RGB8);
+    requiredFormats.push_back(GL_RGBA8);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, true);
+}
+
+// Checks for GL_EXT_texture_format_BGRA8888 support
+static bool DetermineBGRA8TextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_BGRA8_EXT);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, true);
+}
+
+// Checks for GL_OES_texture_half_float support
+static bool DetermineHalfFloatTextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_RGB16F);
+    requiredFormats.push_back(GL_RGBA16F);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, false, true);
+}
+
+// Checks for GL_OES_texture_half_float_linear support
+static bool DetermineHalfFloatTextureFilteringSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_RGB16F);
+    requiredFormats.push_back(GL_RGBA16F);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, false);
+}
+
+// Checks for GL_OES_texture_float support
+static bool DetermineFloatTextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_RGB32F);
+    requiredFormats.push_back(GL_RGBA32F);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, false, true);
+}
+
+// Checks for GL_OES_texture_float_linear support
+static bool DetermineFloatTextureFilteringSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_RGB32F);
+    requiredFormats.push_back(GL_RGBA32F);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, false);
+}
+
+// Checks for GL_EXT_texture_rg support
+static bool DetermineRGTextureSupport(const TextureCapsMap &textureCaps, bool checkHalfFloatFormats, bool checkFloatFormats)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_R8);
+    requiredFormats.push_back(GL_RG8);
+    if (checkHalfFloatFormats)
+    {
+        requiredFormats.push_back(GL_R16F);
+        requiredFormats.push_back(GL_RG16F);
+    }
+    if (checkFloatFormats)
+    {
+        requiredFormats.push_back(GL_R32F);
+        requiredFormats.push_back(GL_RG32F);
+    }
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, false);
+}
+
+// Check for GL_EXT_texture_compression_dxt1
+static bool DetermineDXT1TextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_COMPRESSED_RGB_S3TC_DXT1_EXT);
+    requiredFormats.push_back(GL_COMPRESSED_RGBA_S3TC_DXT1_EXT);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, false);
+}
+
+// Check for GL_ANGLE_texture_compression_dxt3
+static bool DetermineDXT3TextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, false);
+}
+
+// Check for GL_ANGLE_texture_compression_dxt5
+static bool DetermineDXT5TextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, false);
+}
+
+// Check for GL_ANGLE_texture_compression_dxt5
+static bool DetermineSRGBTextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFilterFormats;
+    requiredFilterFormats.push_back(GL_SRGB8);
+    requiredFilterFormats.push_back(GL_SRGB8_ALPHA8);
+
+    std::vector<GLenum> requiredRenderFormats;
+    requiredRenderFormats.push_back(GL_SRGB8_ALPHA8);
+
+    return GetFormatSupport(textureCaps, requiredFilterFormats, true, true, false) &&
+           GetFormatSupport(textureCaps, requiredRenderFormats, true, false, true);
+}
+
+// Check for GL_ANGLE_depth_texture
+static bool DetermineDepthTextureSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_DEPTH_COMPONENT16);
+    requiredFormats.push_back(GL_DEPTH_COMPONENT32_OES);
+    requiredFormats.push_back(GL_DEPTH24_STENCIL8_OES);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, true, true);
+}
+
+// Check for GL_EXT_color_buffer_float
+static bool DetermineColorBufferFloatSupport(const TextureCapsMap &textureCaps)
+{
+    std::vector<GLenum> requiredFormats;
+    requiredFormats.push_back(GL_R16F);
+    requiredFormats.push_back(GL_RG16F);
+    requiredFormats.push_back(GL_RGBA16F);
+    requiredFormats.push_back(GL_R32F);
+    requiredFormats.push_back(GL_RG32F);
+    requiredFormats.push_back(GL_RGBA32F);
+    requiredFormats.push_back(GL_R11F_G11F_B10F);
+
+    return GetFormatSupport(textureCaps, requiredFormats, true, false, true);
+}
+
+void Extensions::setTextureExtensionSupport(const TextureCapsMap &textureCaps)
+{
+    rgb8rgba8 = DetermineRGB8AndRGBA8TextureSupport(textureCaps);
+    textureFormatBGRA8888 = DetermineBGRA8TextureSupport(textureCaps);
+    textureHalfFloat = DetermineHalfFloatTextureSupport(textureCaps);
+    textureHalfFloatLinear = DetermineHalfFloatTextureFilteringSupport(textureCaps);
+    textureFloat = DetermineFloatTextureSupport(textureCaps);
+    textureFloatLinear = DetermineFloatTextureFilteringSupport(textureCaps);
+    textureRG = DetermineRGTextureSupport(textureCaps, textureHalfFloat, textureFloat);
+    textureCompressionDXT1 = DetermineDXT1TextureSupport(textureCaps);
+    textureCompressionDXT3 = DetermineDXT3TextureSupport(textureCaps);
+    textureCompressionDXT5 = DetermineDXT5TextureSupport(textureCaps);
+    sRGB = DetermineSRGBTextureSupport(textureCaps);
+    depthTextures = DetermineDepthTextureSupport(textureCaps);
+    colorBufferFloat = DetermineColorBufferFloatSupport(textureCaps);
+}
+
+Caps::Caps()
+    : maxElementIndex(0),
+      max3DTextureSize(0),
+      max2DTextureSize(0),
+      maxArrayTextureLayers(0),
+      maxLODBias(0),
+      maxCubeMapTextureSize(0),
+      maxRenderbufferSize(0),
+      maxDrawBuffers(0),
+      maxColorAttachments(0),
+      maxViewportWidth(0),
+      maxViewportHeight(0),
+      minAliasedPointSize(0),
+      maxAliasedPointSize(0),
+      minAliasedLineWidth(0),
+      // Table 6.29
+      maxElementsIndices(0),
+      maxElementsVertices(0),
+      maxServerWaitTimeout(0),
+      // Table 6.31
+      maxVertexAttributes(0),
+      maxVertexUniformComponents(0),
+      maxVertexUniformVectors(0),
+      maxVertexUniformBlocks(0),
+      maxVertexOutputComponents(0),
+      maxVertexTextureImageUnits(0),
+      // Table 6.32
+      maxFragmentUniformComponents(0),
+      maxFragmentUniformVectors(0),
+      maxFragmentUniformBlocks(0),
+      maxFragmentInputComponents(0),
+      maxTextureImageUnits(0),
+      minProgramTexelOffset(0),
+      maxProgramTexelOffset(0),
+
+      maxUniformBufferBindings(0),
+      maxUniformBlockSize(0),
+      uniformBufferOffsetAlignment(0),
+      maxCombinedUniformBlocks(0),
+      maxCombinedVertexUniformComponents(0),
+      maxCombinedFragmentUniformComponents(0),
+      maxVaryingComponents(0),
+      maxVaryingVectors(0),
+      maxCombinedTextureImageUnits(0),
+
+      maxTransformFeedbackInterleavedComponents(0),
+      maxTransformFeedbackSeparateAttributes(0),
+      maxTransformFeedbackSeparateComponents(0)
+{
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/Caps.h b/src/3rdparty/angle/src/libGLESv2/Caps.h
new file mode 100644
index 0000000000..a00e554176
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/Caps.h
@@ -0,0 +1,273 @@
+#ifndef LIBGLESV2_CAPS_H
+#define LIBGLESV2_CAPS_H
+
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "angle_gl.h"
+
+#include <set>
+#include <unordered_map>
+#include <vector>
+#include <string>
+
+namespace gl
+{
+
+typedef std::set<GLuint> SupportedSampleSet;
+
+struct TextureCaps
+{
+    TextureCaps();
+
+    // Supports for basic texturing: glTexImage, glTexSubImage, etc
+    bool texturable;
+
+    // Support for linear or anisotropic filtering
+    bool filterable;
+
+    // Support for being used as a framebuffer attachment or renderbuffer format
+    bool renderable;
+
+    SupportedSampleSet sampleCounts;
+
+    // Get the maximum number of samples supported
+    GLuint getMaxSamples() const;
+
+    // Get the number of supported samples that is at least as many as requested.  Returns 0 if
+    // there are no sample counts available
+    GLuint getNearestSamples(GLuint requestedSamples) const;
+};
+
+class TextureCapsMap
+{
+  public:
+    typedef std::unordered_map<GLenum, TextureCaps>::const_iterator const_iterator;
+
+    void insert(GLenum internalFormat, const TextureCaps &caps);
+    void remove(GLenum internalFormat);
+
+    const TextureCaps &get(GLenum internalFormat) const;
+
+    const_iterator begin() const;
+    const_iterator end() const;
+
+    size_t size() const;
+
+  private:
+    typedef std::unordered_map<GLenum, TextureCaps> InternalFormatToCapsMap;
+    InternalFormatToCapsMap mCapsMap;
+};
+
+struct Extensions
+{
+    Extensions();
+
+    // Generate a vector of supported extension strings
+    std::vector<std::string> getStrings() const;
+
+    // Set all texture related extension support based on the supported textures.
+    // Determines support for:
+    // GL_OES_rgb8_rgba8
+    // GL_EXT_texture_format_BGRA8888
+    // GL_OES_texture_half_float, GL_OES_texture_half_float_linear
+    // GL_OES_texture_float, GL_OES_texture_float_linear
+    // GL_EXT_texture_rg
+    // GL_EXT_texture_compression_dxt1, GL_ANGLE_texture_compression_dxt3, GL_ANGLE_texture_compression_dxt5
+    // GL_EXT_sRGB
+    // GL_ANGLE_depth_texture
+    // GL_EXT_color_buffer_float
+    void setTextureExtensionSupport(const TextureCapsMap &textureCaps);
+
+    // ES2 Extension support
+
+    // GL_OES_element_index_uint
+    bool elementIndexUint;
+
+    // GL_OES_packed_depth_stencil
+    bool packedDepthStencil;
+
+    // GL_OES_get_program_binary
+    bool getProgramBinary;
+
+    // GL_OES_rgb8_rgba8
+    // Implies that TextureCaps for GL_RGB8 and GL_RGBA8 exist
+    bool rgb8rgba8;
+
+    // GL_EXT_texture_format_BGRA8888
+    // Implies that TextureCaps for GL_BGRA8 exist
+    bool textureFormatBGRA8888;
+
+    // GL_EXT_read_format_bgra
+    bool readFormatBGRA;
+
+    // GL_NV_pixel_buffer_object
+    bool pixelBufferObject;
+
+    // GL_OES_mapbuffer and GL_EXT_map_buffer_range
+    bool mapBuffer;
+    bool mapBufferRange;
+
+    // GL_OES_texture_half_float and GL_OES_texture_half_float_linear
+    // Implies that TextureCaps for GL_RGB16F, GL_RGBA16F, GL_ALPHA32F_EXT, GL_LUMINANCE32F_EXT and
+    // GL_LUMINANCE_ALPHA32F_EXT exist
+    bool textureHalfFloat;
+    bool textureHalfFloatLinear;
+
+    // GL_OES_texture_float and GL_OES_texture_float_linear
+    // Implies that TextureCaps for GL_RGB32F, GL_RGBA32F, GL_ALPHA16F_EXT, GL_LUMINANCE16F_EXT and
+    // GL_LUMINANCE_ALPHA16F_EXT exist
+    bool textureFloat;
+    bool textureFloatLinear;
+
+    // GL_EXT_texture_rg
+    // Implies that TextureCaps for GL_R8, GL_RG8 (and floating point R/RG texture formats if floating point extensions
+    // are also present) exist
+    bool textureRG;
+
+    // GL_EXT_texture_compression_dxt1, GL_ANGLE_texture_compression_dxt3 and GL_ANGLE_texture_compression_dxt5
+    // Implies that TextureCaps for GL_COMPRESSED_RGB_S3TC_DXT1_EXT, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT
+    // GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE and GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE
+    bool textureCompressionDXT1;
+    bool textureCompressionDXT3;
+    bool textureCompressionDXT5;
+
+    // GL_EXT_sRGB
+    // Implies that TextureCaps for GL_SRGB8_ALPHA8 and GL_SRGB8 exist
+    // TODO: Don't advertise this extension in ES3
+    bool sRGB;
+
+    // GL_ANGLE_depth_texture
+    bool depthTextures;
+
+    // GL_EXT_texture_storage
+    bool textureStorage;
+
+    // GL_OES_texture_npot
+    bool textureNPOT;
+
+    // GL_EXT_draw_buffers
+    bool drawBuffers;
+
+    // GL_EXT_texture_filter_anisotropic
+    bool textureFilterAnisotropic;
+    GLfloat maxTextureAnisotropy;
+
+    // GL_EXT_occlusion_query_boolean
+    bool occlusionQueryBoolean;
+
+    // GL_NV_fence
+    bool fence;
+
+    // GL_ANGLE_timer_query
+    bool timerQuery;
+
+    // GL_EXT_robustness
+    bool robustness;
+
+    // GL_EXT_blend_minmax
+    bool blendMinMax;
+
+    // GL_ANGLE_framebuffer_blit
+    bool framebufferBlit;
+
+    // GL_ANGLE_framebuffer_multisample
+    bool framebufferMultisample;
+    GLuint maxSamples;
+
+    // GL_ANGLE_instanced_arrays
+    bool instancedArrays;
+
+    // GL_ANGLE_pack_reverse_row_order
+    bool packReverseRowOrder;
+
+    // GL_OES_standard_derivatives
+    bool standardDerivatives;
+
+    // GL_EXT_shader_texture_lod
+    bool shaderTextureLOD;
+
+    // GL_EXT_frag_depth
+    bool fragDepth;
+
+    // GL_ANGLE_texture_usage
+    bool textureUsage;
+
+    // GL_ANGLE_translated_shader_source
+    bool translatedShaderSource;
+
+    // ES3 Extension support
+
+    // GL_EXT_color_buffer_float
+    bool colorBufferFloat;
+};
+
+struct Caps
+{
+    Caps();
+
+    // Table 6.28, implementation dependent values
+    GLuint64 maxElementIndex;
+    GLuint max3DTextureSize;
+    GLuint max2DTextureSize;
+    GLuint maxArrayTextureLayers;
+    GLfloat maxLODBias;
+    GLuint maxCubeMapTextureSize;
+    GLuint maxRenderbufferSize;
+    GLuint maxDrawBuffers;
+    GLuint maxColorAttachments;
+    GLuint maxViewportWidth;
+    GLuint maxViewportHeight;
+    GLfloat minAliasedPointSize;
+    GLfloat maxAliasedPointSize;
+    GLfloat minAliasedLineWidth;
+    GLfloat maxAliasedLineWidth;
+
+    // Table 6.29, implementation dependent values (cont.)
+    GLuint maxElementsIndices;
+    GLuint maxElementsVertices;
+    std::vector<GLenum> compressedTextureFormats;
+    std::vector<GLenum> programBinaryFormats;
+    std::vector<GLenum> shaderBinaryFormats;
+    GLuint64 maxServerWaitTimeout;
+
+    // Table 6.31, implementation dependent vertex shader limits
+    GLuint maxVertexAttributes;
+    GLuint maxVertexUniformComponents;
+    GLuint maxVertexUniformVectors;
+    GLuint maxVertexUniformBlocks;
+    GLuint maxVertexOutputComponents;
+    GLuint maxVertexTextureImageUnits;
+
+    // Table 6.32, implementation dependent fragment shader limits
+    GLuint maxFragmentUniformComponents;
+    GLuint maxFragmentUniformVectors;
+    GLuint maxFragmentUniformBlocks;
+    GLuint maxFragmentInputComponents;
+    GLuint maxTextureImageUnits;
+    GLint minProgramTexelOffset;
+    GLint maxProgramTexelOffset;
+
+    // Table 6.33, implementation dependent aggregate shader limits
+    GLuint maxUniformBufferBindings;
+    GLuint64 maxUniformBlockSize;
+    GLuint uniformBufferOffsetAlignment;
+    GLuint maxCombinedUniformBlocks;
+    GLuint64 maxCombinedVertexUniformComponents;
+    GLuint64 maxCombinedFragmentUniformComponents;
+    GLuint maxVaryingComponents;
+    GLuint maxVaryingVectors;
+    GLuint maxCombinedTextureImageUnits;
+
+    // Table 6.34, implementation dependent transform feedback limits
+    GLuint maxTransformFeedbackInterleavedComponents;
+    GLuint maxTransformFeedbackSeparateAttributes;
+    GLuint maxTransformFeedbackSeparateComponents;
+};
+
+}
+
+#endif // LIBGLESV2_CAPS_H
diff --git a/src/3rdparty/angle/src/libGLESv2/Context.cpp b/src/3rdparty/angle/src/libGLESv2/Context.cpp
index e651785aed..5342de1331 100644
--- a/src/3rdparty/angle/src/libGLESv2/Context.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Context.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,116 +10,45 @@
 #include "libGLESv2/Context.h"
 
 #include "libGLESv2/main.h"
-#include "libGLESv2/utilities.h"
+#include "common/utilities.h"
+#include "common/platform.h"
+#include "libGLESv2/formatutils.h"
 #include "libGLESv2/Buffer.h"
 #include "libGLESv2/Fence.h"
 #include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
 #include "libGLESv2/Renderbuffer.h"
 #include "libGLESv2/Program.h"
 #include "libGLESv2/ProgramBinary.h"
 #include "libGLESv2/Query.h"
 #include "libGLESv2/Texture.h"
 #include "libGLESv2/ResourceManager.h"
-#include "libGLESv2/renderer/IndexDataManager.h"
-#include "libGLESv2/renderer/RenderTarget.h"
+#include "libGLESv2/renderer/d3d/IndexDataManager.h"
 #include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/VertexArray.h"
+#include "libGLESv2/Sampler.h"
+#include "libGLESv2/validationES.h"
+#include "libGLESv2/TransformFeedback.h"
 
 #include "libEGL/Surface.h"
 
-#undef near
-#undef far
+#include <sstream>
+#include <iterator>
 
 namespace gl
 {
-static const char* makeStaticString(const std::string& str)
-{
-    static std::set<std::string> strings;
-    std::set<std::string>::iterator it = strings.find(str);
-    if (it != strings.end())
-      return it->c_str();
-
-    return strings.insert(str).first->c_str();
-}
 
-Context::Context(const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess) : mRenderer(renderer)
+Context::Context(int clientVersion, const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess)
+    : mRenderer(renderer)
 {
     ASSERT(robustAccess == false);   // Unimplemented
 
-    mFenceHandleAllocator.setBaseHandle(0);
-
-    setClearColor(0.0f, 0.0f, 0.0f, 0.0f);
-
-    mState.depthClearValue = 1.0f;
-    mState.stencilClearValue = 0;
-
-    mState.rasterizer.cullFace = false;
-    mState.rasterizer.cullMode = GL_BACK;
-    mState.rasterizer.frontFace = GL_CCW;
-    mState.rasterizer.polygonOffsetFill = false;
-    mState.rasterizer.polygonOffsetFactor = 0.0f;
-    mState.rasterizer.polygonOffsetUnits = 0.0f;
-    mState.rasterizer.pointDrawMode = false;
-    mState.rasterizer.multiSample = false;
-    mState.scissorTest = false;
-    mState.scissor.x = 0;
-    mState.scissor.y = 0;
-    mState.scissor.width = 0;
-    mState.scissor.height = 0;
-
-    mState.blend.blend = false;
-    mState.blend.sourceBlendRGB = GL_ONE;
-    mState.blend.sourceBlendAlpha = GL_ONE;
-    mState.blend.destBlendRGB = GL_ZERO;
-    mState.blend.destBlendAlpha = GL_ZERO;
-    mState.blend.blendEquationRGB = GL_FUNC_ADD;
-    mState.blend.blendEquationAlpha = GL_FUNC_ADD;
-    mState.blend.sampleAlphaToCoverage = false;
-    mState.blend.dither = true;
-
-    mState.blendColor.red = 0;
-    mState.blendColor.green = 0;
-    mState.blendColor.blue = 0;
-    mState.blendColor.alpha = 0;
-
-    mState.depthStencil.depthTest = false;
-    mState.depthStencil.depthFunc = GL_LESS;
-    mState.depthStencil.depthMask = true;
-    mState.depthStencil.stencilTest = false;
-    mState.depthStencil.stencilFunc = GL_ALWAYS;
-    mState.depthStencil.stencilMask = -1;
-    mState.depthStencil.stencilWritemask = -1;
-    mState.depthStencil.stencilBackFunc = GL_ALWAYS;
-    mState.depthStencil.stencilBackMask = - 1;
-    mState.depthStencil.stencilBackWritemask = -1;
-    mState.depthStencil.stencilFail = GL_KEEP;
-    mState.depthStencil.stencilPassDepthFail = GL_KEEP;
-    mState.depthStencil.stencilPassDepthPass = GL_KEEP;
-    mState.depthStencil.stencilBackFail = GL_KEEP;
-    mState.depthStencil.stencilBackPassDepthFail = GL_KEEP;
-    mState.depthStencil.stencilBackPassDepthPass = GL_KEEP;
-
-    mState.stencilRef = 0;
-    mState.stencilBackRef = 0;
-
-    mState.sampleCoverage = false;
-    mState.sampleCoverageValue = 1.0f;
-    mState.sampleCoverageInvert = false;
-    mState.generateMipmapHint = GL_DONT_CARE;
-    mState.fragmentShaderDerivativeHint = GL_DONT_CARE;
-
-    mState.lineWidth = 1.0f;
-
-    mState.viewport.x = 0;
-    mState.viewport.y = 0;
-    mState.viewport.width = 0;
-    mState.viewport.height = 0;
-    mState.zNear = 0.0f;
-    mState.zFar = 1.0f;
-
-    mState.blend.colorMaskRed = true;
-    mState.blend.colorMaskGreen = true;
-    mState.blend.colorMaskBlue = true;
-    mState.blend.colorMaskAlpha = true;
+    initCaps(clientVersion);
+    mState.initialize(mCaps, clientVersion);
+
+    mClientVersion = clientVersion;
+
+    mFenceNVHandleAllocator.setBaseHandle(0);
 
     if (shareContext != NULL)
     {
@@ -138,33 +66,53 @@ Context::Context(const gl::Context *shareContext, rx::Renderer *renderer, bool n
     // In order that access to these initial textures not be lost, they are treated as texture
     // objects all of whose names are 0.
 
-    mTexture2DZero.set(new Texture2D(mRenderer, 0));
-    mTextureCubeMapZero.set(new TextureCubeMap(mRenderer, 0));
+    mZeroTextures[GL_TEXTURE_2D].set(new Texture2D(mRenderer->createTexture(GL_TEXTURE_2D), 0));
+    bindTexture(GL_TEXTURE_2D, 0);
 
-    mState.activeSampler = 0;
+    mZeroTextures[GL_TEXTURE_CUBE_MAP].set(new TextureCubeMap(mRenderer->createTexture(GL_TEXTURE_CUBE_MAP), 0));
+    bindTexture(GL_TEXTURE_CUBE_MAP, 0);
+
+    if (mClientVersion >= 3)
+    {
+        // TODO: These could also be enabled via extension
+        mZeroTextures[GL_TEXTURE_3D].set(new Texture3D(mRenderer->createTexture(GL_TEXTURE_3D), 0));
+        bindTexture(GL_TEXTURE_3D, 0);
+
+        mZeroTextures[GL_TEXTURE_2D_ARRAY].set(new Texture2DArray(mRenderer->createTexture(GL_TEXTURE_2D_ARRAY), 0));
+        bindTexture(GL_TEXTURE_2D_ARRAY, 0);
+    }
+
+    bindVertexArray(0);
     bindArrayBuffer(0);
     bindElementArrayBuffer(0);
-    bindTextureCubeMap(0);
-    bindTexture2D(0);
+
     bindReadFramebuffer(0);
     bindDrawFramebuffer(0);
     bindRenderbuffer(0);
 
-    mState.currentProgram = 0;
-    mCurrentProgramBinary.set(NULL);
+    bindGenericUniformBuffer(0);
+    for (int i = 0; i < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS; i++)
+    {
+        bindIndexedUniformBuffer(0, i, 0, -1);
+    }
 
-    mState.packAlignment = 4;
-    mState.unpackAlignment = 4;
-    mState.packReverseRowOrder = false;
+    bindGenericTransformFeedbackBuffer(0);
+    for (int i = 0; i < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
+    {
+        bindIndexedTransformFeedbackBuffer(0, i, 0, -1);
+    }
 
-    mExtensionString = NULL;
-    mRendererString = NULL;
+    bindCopyReadBuffer(0);
+    bindCopyWriteBuffer(0);
+    bindPixelPackBuffer(0);
+    bindPixelUnpackBuffer(0);
 
-    mInvalidEnum = false;
-    mInvalidValue = false;
-    mInvalidOperation = false;
-    mOutOfMemory = false;
-    mInvalidFramebufferOperation = false;
+    // [OpenGL ES 3.0.2] section 2.14.1 pg 85:
+    // In the initial state, a default transform feedback object is bound and treated as
+    // a transform feedback object with a name of zero. That object is bound any time
+    // BindTransformFeedback is called with id of zero
+    mTransformFeedbackZero.set(new TransformFeedback(mRenderer->createTransformFeedback(), 0));
+    bindTransformFeedback(0);
 
     mHasBeenCurrent = false;
     mContextLost = false;
@@ -172,36 +120,31 @@ Context::Context(const gl::Context *shareContext, rx::Renderer *renderer, bool n
     mResetStrategy = (notifyResets ? GL_LOSE_CONTEXT_ON_RESET_EXT : GL_NO_RESET_NOTIFICATION_EXT);
     mRobustAccess = robustAccess;
 
-    mSupportsBGRATextures = false;
-    mSupportsDXT1Textures = false;
-    mSupportsDXT3Textures = false;
-    mSupportsDXT5Textures = false;
-    mSupportsEventQueries = false;
-    mSupportsOcclusionQueries = false;
-    mNumCompressedTextureFormats = 0;
+    mState.setContext(this);
 }
 
 Context::~Context()
 {
-    if (mState.currentProgram != 0)
+    GLuint currentProgram = mState.getCurrentProgramId();
+    if (currentProgram != 0)
     {
-        Program *programObject = mResourceManager->getProgram(mState.currentProgram);
+        Program *programObject = mResourceManager->getProgram(currentProgram);
         if (programObject)
         {
             programObject->release();
         }
-        mState.currentProgram = 0;
+        currentProgram = 0;
     }
-    mCurrentProgramBinary.set(NULL);
+    mState.setCurrentProgram(0, NULL);
 
     while (!mFramebufferMap.empty())
     {
         deleteFramebuffer(mFramebufferMap.begin()->first);
     }
 
-    while (!mFenceMap.empty())
+    while (!mFenceNVMap.empty())
     {
-        deleteFence(mFenceMap.begin()->first);
+        deleteFenceNV(mFenceNVMap.begin()->first);
     }
 
     while (!mQueryMap.empty())
@@ -209,35 +152,28 @@ Context::~Context()
         deleteQuery(mQueryMap.begin()->first);
     }
 
-    for (int type = 0; type < TEXTURE_TYPE_COUNT; type++)
+    while (!mVertexArrayMap.empty())
     {
-        for (int sampler = 0; sampler < IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS; sampler++)
-        {
-            mState.samplerTexture[type][sampler].set(NULL);
-        }
+        deleteVertexArray(mVertexArrayMap.begin()->first);
     }
 
-    for (int type = 0; type < TEXTURE_TYPE_COUNT; type++)
+    mTransformFeedbackZero.set(NULL);
+    while (!mTransformFeedbackMap.empty())
     {
-        mIncompleteTextures[type].set(NULL);
+        deleteTransformFeedback(mTransformFeedbackMap.begin()->first);
     }
 
-    for (int i = 0; i < MAX_VERTEX_ATTRIBS; i++)
+    for (TextureMap::iterator i = mIncompleteTextures.begin(); i != mIncompleteTextures.end(); i++)
     {
-        mState.vertexAttribute[i].mBoundBuffer.set(NULL);
+        i->second.set(NULL);
     }
+    mIncompleteTextures.clear();
 
-    for (int i = 0; i < QUERY_TYPE_COUNT; i++)
+    for (TextureMap::iterator i = mZeroTextures.begin(); i != mZeroTextures.end(); i++)
     {
-        mState.activeQuery[i].set(NULL);
+        i->second.set(NULL);
     }
-
-    mState.arrayBuffer.set(NULL);
-    mState.elementArrayBuffer.set(NULL);
-    mState.renderbuffer.set(NULL);
-
-    mTexture2DZero.set(NULL);
-    mTextureCubeMapZero.set(NULL);
+    mZeroTextures.clear();
 
     mResourceManager->release();
 }
@@ -246,62 +182,11 @@ void Context::makeCurrent(egl::Surface *surface)
 {
     if (!mHasBeenCurrent)
     {
-        mMajorShaderModel = mRenderer->getMajorShaderModel();
-        mMaximumPointSize = mRenderer->getMaxPointSize();
-        mSupportsVertexTexture = mRenderer->getVertexTextureSupport();
-        mSupportsNonPower2Texture = mRenderer->getNonPower2TextureSupport();
-        mSupportsInstancing = mRenderer->getInstancingSupport();
-
-        mMaxViewportDimension = mRenderer->getMaxViewportDimension();
-        mMaxTextureDimension = std::min(std::min(mRenderer->getMaxTextureWidth(), mRenderer->getMaxTextureHeight()),
-                                        (int)gl::IMPLEMENTATION_MAX_TEXTURE_SIZE);
-        mMaxCubeTextureDimension = std::min(mMaxTextureDimension, (int)gl::IMPLEMENTATION_MAX_CUBE_MAP_TEXTURE_SIZE);
-        mMaxRenderbufferDimension = mMaxTextureDimension;
-        mMaxTextureLevel = log2(mMaxTextureDimension) + 1;
-        mMaxTextureAnisotropy = mRenderer->getTextureMaxAnisotropy();
-        TRACE("MaxTextureDimension=%d, MaxCubeTextureDimension=%d, MaxRenderbufferDimension=%d, MaxTextureLevel=%d, MaxTextureAnisotropy=%f",
-              mMaxTextureDimension, mMaxCubeTextureDimension, mMaxRenderbufferDimension, mMaxTextureLevel, mMaxTextureAnisotropy);
-
-        mSupportsEventQueries = mRenderer->getEventQuerySupport();
-        mSupportsOcclusionQueries = mRenderer->getOcclusionQuerySupport();
-        mSupportsBGRATextures = mRenderer->getBGRATextureSupport();
-        mSupportsDXT1Textures = mRenderer->getDXT1TextureSupport();
-        mSupportsDXT3Textures = mRenderer->getDXT3TextureSupport();
-        mSupportsDXT5Textures = mRenderer->getDXT5TextureSupport();
-        mSupportsFloat32Textures = mRenderer->getFloat32TextureSupport(&mSupportsFloat32LinearFilter, &mSupportsFloat32RenderableTextures);
-        mSupportsFloat16Textures = mRenderer->getFloat16TextureSupport(&mSupportsFloat16LinearFilter, &mSupportsFloat16RenderableTextures);
-        mSupportsLuminanceTextures = mRenderer->getLuminanceTextureSupport();
-        mSupportsLuminanceAlphaTextures = mRenderer->getLuminanceAlphaTextureSupport();
-        mSupportsDepthTextures = mRenderer->getDepthTextureSupport();
-        mSupportsTextureFilterAnisotropy = mRenderer->getTextureFilterAnisotropySupport();
-        mSupports32bitIndices = mRenderer->get32BitIndexSupport();
-
-        mNumCompressedTextureFormats = 0;
-        if (supportsDXT1Textures())
-        {
-            mNumCompressedTextureFormats += 2;
-        }
-        if (supportsDXT3Textures())
-        {
-            mNumCompressedTextureFormats += 1;
-        }
-        if (supportsDXT5Textures())
-        {
-            mNumCompressedTextureFormats += 1;
-        }
-
-        initExtensionString();
         initRendererString();
+        initExtensionStrings();
 
-        mState.viewport.x = 0;
-        mState.viewport.y = 0;
-        mState.viewport.width = surface->getWidth();
-        mState.viewport.height = surface->getHeight();
-
-        mState.scissor.x = 0;
-        mState.scissor.y = 0;
-        mState.scissor.width = surface->getWidth();
-        mState.scissor.height = surface->getHeight();
+        mState.setViewportParams(0, 0, surface->getWidth(), surface->getHeight());
+        mState.setScissorParams(0, 0, surface->getWidth(), surface->getHeight());
 
         mHasBeenCurrent = true;
     }
@@ -314,6 +199,9 @@ void Context::makeCurrent(egl::Surface *surface)
     Framebuffer *framebufferZero = new DefaultFramebuffer(mRenderer, colorbufferZero, depthStencilbufferZero);
 
     setFramebufferZero(framebufferZero);
+
+    // Store the current client version in the renderer
+    mRenderer->setCurrentClientVersion(mClientVersion);
 }
 
 // NOTE: this function should not assume that this context is current!
@@ -329,608 +217,425 @@ bool Context::isContextLost()
     return mContextLost;
 }
 
-void Context::setClearColor(float red, float green, float blue, float alpha)
+GLuint Context::createBuffer()
 {
-    mState.colorClearValue.red = red;
-    mState.colorClearValue.green = green;
-    mState.colorClearValue.blue = blue;
-    mState.colorClearValue.alpha = alpha;
+    return mResourceManager->createBuffer();
 }
 
-void Context::setClearDepth(float depth)
+GLuint Context::createProgram()
 {
-    mState.depthClearValue = depth;
+    return mResourceManager->createProgram();
 }
 
-void Context::setClearStencil(int stencil)
+GLuint Context::createShader(GLenum type)
 {
-    mState.stencilClearValue = stencil;
+    return mResourceManager->createShader(type);
 }
 
-void Context::setCullFace(bool enabled)
+GLuint Context::createTexture()
 {
-    mState.rasterizer.cullFace = enabled;
+    return mResourceManager->createTexture();
 }
 
-bool Context::isCullFaceEnabled() const
+GLuint Context::createRenderbuffer()
 {
-    return mState.rasterizer.cullFace;
+    return mResourceManager->createRenderbuffer();
 }
 
-void Context::setCullMode(GLenum mode)
+GLsync Context::createFenceSync(GLenum condition)
 {
-    mState.rasterizer.cullMode = mode;
-}
+    GLuint handle = mResourceManager->createFenceSync();
 
-void Context::setFrontFace(GLenum front)
-{
-    mState.rasterizer.frontFace = front;
-}
+    gl::FenceSync *fenceSync = mResourceManager->getFenceSync(handle);
+    ASSERT(fenceSync);
 
-void Context::setDepthTest(bool enabled)
-{
-    mState.depthStencil.depthTest = enabled;
-}
+    fenceSync->set(condition);
 
-bool Context::isDepthTestEnabled() const
-{
-    return mState.depthStencil.depthTest;
+    return reinterpret_cast<GLsync>(handle);
 }
 
-void Context::setDepthFunc(GLenum depthFunc)
+GLuint Context::createVertexArray()
 {
-     mState.depthStencil.depthFunc = depthFunc;
-}
+    GLuint handle = mVertexArrayHandleAllocator.allocate();
 
-void Context::setDepthRange(float zNear, float zFar)
-{
-    mState.zNear = zNear;
-    mState.zFar = zFar;
+    // Although the spec states VAO state is not initialized until the object is bound,
+    // we create it immediately. The resulting behaviour is transparent to the application,
+    // since it's not currently possible to access the state until the object is bound.
+    VertexArray *vertexArray = new VertexArray(mRenderer->createVertexArray(), handle, MAX_VERTEX_ATTRIBS);
+    mVertexArrayMap[handle] = vertexArray;
+    return handle;
 }
 
-void Context::setBlend(bool enabled)
+GLuint Context::createSampler()
 {
-    mState.blend.blend = enabled;
+    return mResourceManager->createSampler();
 }
 
-bool Context::isBlendEnabled() const
+GLuint Context::createTransformFeedback()
 {
-    return mState.blend.blend;
+    GLuint handle = mTransformFeedbackAllocator.allocate();
+    TransformFeedback *transformFeedback = new TransformFeedback(mRenderer->createTransformFeedback(), handle);
+    transformFeedback->addRef();
+    mTransformFeedbackMap[handle] = transformFeedback;
+    return handle;
 }
 
-void Context::setBlendFactors(GLenum sourceRGB, GLenum destRGB, GLenum sourceAlpha, GLenum destAlpha)
+// Returns an unused framebuffer name
+GLuint Context::createFramebuffer()
 {
-    mState.blend.sourceBlendRGB = sourceRGB;
-    mState.blend.destBlendRGB = destRGB;
-    mState.blend.sourceBlendAlpha = sourceAlpha;
-    mState.blend.destBlendAlpha = destAlpha;
-}
+    GLuint handle = mFramebufferHandleAllocator.allocate();
 
-void Context::setBlendColor(float red, float green, float blue, float alpha)
-{
-    mState.blendColor.red = red;
-    mState.blendColor.green = green;
-    mState.blendColor.blue = blue;
-    mState.blendColor.alpha = alpha;
-}
+    mFramebufferMap[handle] = NULL;
 
-void Context::setBlendEquation(GLenum rgbEquation, GLenum alphaEquation)
-{
-    mState.blend.blendEquationRGB = rgbEquation;
-    mState.blend.blendEquationAlpha = alphaEquation;
+    return handle;
 }
 
-void Context::setStencilTest(bool enabled)
+GLuint Context::createFenceNV()
 {
-    mState.depthStencil.stencilTest = enabled;
-}
+    GLuint handle = mFenceNVHandleAllocator.allocate();
 
-bool Context::isStencilTestEnabled() const
-{
-    return mState.depthStencil.stencilTest;
-}
+    mFenceNVMap[handle] = new FenceNV(mRenderer);
 
-void Context::setStencilParams(GLenum stencilFunc, GLint stencilRef, GLuint stencilMask)
-{
-    mState.depthStencil.stencilFunc = stencilFunc;
-    mState.stencilRef = (stencilRef > 0) ? stencilRef : 0;
-    mState.depthStencil.stencilMask = stencilMask;
+    return handle;
 }
 
-void Context::setStencilBackParams(GLenum stencilBackFunc, GLint stencilBackRef, GLuint stencilBackMask)
+// Returns an unused query name
+GLuint Context::createQuery()
 {
-    mState.depthStencil.stencilBackFunc = stencilBackFunc;
-    mState.stencilBackRef = (stencilBackRef > 0) ? stencilBackRef : 0;
-    mState.depthStencil.stencilBackMask = stencilBackMask;
-}
+    GLuint handle = mQueryHandleAllocator.allocate();
 
-void Context::setStencilWritemask(GLuint stencilWritemask)
-{
-    mState.depthStencil.stencilWritemask = stencilWritemask;
-}
+    mQueryMap[handle] = NULL;
 
-void Context::setStencilBackWritemask(GLuint stencilBackWritemask)
-{
-    mState.depthStencil.stencilBackWritemask = stencilBackWritemask;
+    return handle;
 }
 
-void Context::setStencilOperations(GLenum stencilFail, GLenum stencilPassDepthFail, GLenum stencilPassDepthPass)
+void Context::deleteBuffer(GLuint buffer)
 {
-    mState.depthStencil.stencilFail = stencilFail;
-    mState.depthStencil.stencilPassDepthFail = stencilPassDepthFail;
-    mState.depthStencil.stencilPassDepthPass = stencilPassDepthPass;
-}
+    if (mResourceManager->getBuffer(buffer))
+    {
+        detachBuffer(buffer);
+    }
 
-void Context::setStencilBackOperations(GLenum stencilBackFail, GLenum stencilBackPassDepthFail, GLenum stencilBackPassDepthPass)
-{
-    mState.depthStencil.stencilBackFail = stencilBackFail;
-    mState.depthStencil.stencilBackPassDepthFail = stencilBackPassDepthFail;
-    mState.depthStencil.stencilBackPassDepthPass = stencilBackPassDepthPass;
+    mResourceManager->deleteBuffer(buffer);
 }
 
-void Context::setPolygonOffsetFill(bool enabled)
+void Context::deleteShader(GLuint shader)
 {
-     mState.rasterizer.polygonOffsetFill = enabled;
+    mResourceManager->deleteShader(shader);
 }
 
-bool Context::isPolygonOffsetFillEnabled() const
+void Context::deleteProgram(GLuint program)
 {
-    return mState.rasterizer.polygonOffsetFill;
+    mResourceManager->deleteProgram(program);
 }
 
-void Context::setPolygonOffsetParams(GLfloat factor, GLfloat units)
+void Context::deleteTexture(GLuint texture)
 {
-    // An application can pass NaN values here, so handle this gracefully
-    mState.rasterizer.polygonOffsetFactor = factor != factor ? 0.0f : factor;
-    mState.rasterizer.polygonOffsetUnits = units != units ? 0.0f : units;
-}
+    if (mResourceManager->getTexture(texture))
+    {
+        detachTexture(texture);
+    }
 
-void Context::setSampleAlphaToCoverage(bool enabled)
-{
-    mState.blend.sampleAlphaToCoverage = enabled;
+    mResourceManager->deleteTexture(texture);
 }
 
-bool Context::isSampleAlphaToCoverageEnabled() const
+void Context::deleteRenderbuffer(GLuint renderbuffer)
 {
-    return mState.blend.sampleAlphaToCoverage;
-}
+    if (mResourceManager->getRenderbuffer(renderbuffer))
+    {
+        detachRenderbuffer(renderbuffer);
+    }
 
-void Context::setSampleCoverage(bool enabled)
-{
-    mState.sampleCoverage = enabled;
+    mResourceManager->deleteRenderbuffer(renderbuffer);
 }
 
-bool Context::isSampleCoverageEnabled() const
+void Context::deleteFenceSync(GLsync fenceSync)
 {
-    return mState.sampleCoverage;
+    // The spec specifies the underlying Fence object is not deleted until all current
+    // wait commands finish. However, since the name becomes invalid, we cannot query the fence,
+    // and since our API is currently designed for being called from a single thread, we can delete
+    // the fence immediately.
+    mResourceManager->deleteFenceSync(uintptr_t(fenceSync));
 }
 
-void Context::setSampleCoverageParams(GLclampf value, bool invert)
+void Context::deleteVertexArray(GLuint vertexArray)
 {
-    mState.sampleCoverageValue = value;
-    mState.sampleCoverageInvert = invert;
-}
+    auto vertexArrayObject = mVertexArrayMap.find(vertexArray);
 
-void Context::setScissorTest(bool enabled)
-{
-    mState.scissorTest = enabled;
-}
+    if (vertexArrayObject != mVertexArrayMap.end())
+    {
+        detachVertexArray(vertexArray);
 
-bool Context::isScissorTestEnabled() const
-{
-    return mState.scissorTest;
+        mVertexArrayHandleAllocator.release(vertexArrayObject->first);
+        delete vertexArrayObject->second;
+        mVertexArrayMap.erase(vertexArrayObject);
+    }
 }
 
-void Context::setDither(bool enabled)
+void Context::deleteSampler(GLuint sampler)
 {
-    mState.blend.dither = enabled;
-}
+    if (mResourceManager->getSampler(sampler))
+    {
+        detachSampler(sampler);
+    }
 
-bool Context::isDitherEnabled() const
-{
-    return mState.blend.dither;
+    mResourceManager->deleteSampler(sampler);
 }
 
-void Context::setLineWidth(GLfloat width)
+void Context::deleteTransformFeedback(GLuint transformFeedback)
 {
-    mState.lineWidth = width;
+    TransformFeedbackMap::const_iterator iter = mTransformFeedbackMap.find(transformFeedback);
+    if (iter != mTransformFeedbackMap.end())
+    {
+        detachTransformFeedback(transformFeedback);
+        mTransformFeedbackAllocator.release(transformFeedback);
+        iter->second->release();
+        mTransformFeedbackMap.erase(iter);
+    }
 }
 
-void Context::setGenerateMipmapHint(GLenum hint)
+void Context::deleteFramebuffer(GLuint framebuffer)
 {
-    mState.generateMipmapHint = hint;
-}
+    FramebufferMap::iterator framebufferObject = mFramebufferMap.find(framebuffer);
 
-void Context::setFragmentShaderDerivativeHint(GLenum hint)
-{
-    mState.fragmentShaderDerivativeHint = hint;
-    // TODO: Propagate the hint to shader translator so we can write
-    // ddx, ddx_coarse, or ddx_fine depending on the hint.
-    // Ignore for now. It is valid for implementations to ignore hint.
-}
+    if (framebufferObject != mFramebufferMap.end())
+    {
+        detachFramebuffer(framebuffer);
 
-void Context::setViewportParams(GLint x, GLint y, GLsizei width, GLsizei height)
-{
-    mState.viewport.x = x;
-    mState.viewport.y = y;
-    mState.viewport.width = width;
-    mState.viewport.height = height;
+        mFramebufferHandleAllocator.release(framebufferObject->first);
+        delete framebufferObject->second;
+        mFramebufferMap.erase(framebufferObject);
+    }
 }
 
-void Context::setScissorParams(GLint x, GLint y, GLsizei width, GLsizei height)
+void Context::deleteFenceNV(GLuint fence)
 {
-    mState.scissor.x = x;
-    mState.scissor.y = y;
-    mState.scissor.width = width;
-    mState.scissor.height = height;
+    FenceNVMap::iterator fenceObject = mFenceNVMap.find(fence);
+
+    if (fenceObject != mFenceNVMap.end())
+    {
+        mFenceNVHandleAllocator.release(fenceObject->first);
+        delete fenceObject->second;
+        mFenceNVMap.erase(fenceObject);
+    }
 }
 
-void Context::setColorMask(bool red, bool green, bool blue, bool alpha)
+void Context::deleteQuery(GLuint query)
 {
-    mState.blend.colorMaskRed = red;
-    mState.blend.colorMaskGreen = green;
-    mState.blend.colorMaskBlue = blue;
-    mState.blend.colorMaskAlpha = alpha;
+    QueryMap::iterator queryObject = mQueryMap.find(query);
+    if (queryObject != mQueryMap.end())
+    {
+        mQueryHandleAllocator.release(queryObject->first);
+        if (queryObject->second)
+        {
+            queryObject->second->release();
+        }
+        mQueryMap.erase(queryObject);
+    }
 }
 
-void Context::setDepthMask(bool mask)
+Buffer *Context::getBuffer(GLuint handle)
 {
-    mState.depthStencil.depthMask = mask;
+    return mResourceManager->getBuffer(handle);
 }
 
-void Context::setActiveSampler(unsigned int active)
+Shader *Context::getShader(GLuint handle) const
 {
-    mState.activeSampler = active;
+    return mResourceManager->getShader(handle);
 }
 
-GLuint Context::getReadFramebufferHandle() const
+Program *Context::getProgram(GLuint handle) const
 {
-    return mState.readFramebuffer;
+    return mResourceManager->getProgram(handle);
 }
 
-GLuint Context::getDrawFramebufferHandle() const
+Texture *Context::getTexture(GLuint handle) const
 {
-    return mState.drawFramebuffer;
+    return mResourceManager->getTexture(handle);
 }
 
-GLuint Context::getRenderbufferHandle() const
+Renderbuffer *Context::getRenderbuffer(GLuint handle)
 {
-    return mState.renderbuffer.id();
+    return mResourceManager->getRenderbuffer(handle);
 }
 
-GLuint Context::getArrayBufferHandle() const
+FenceSync *Context::getFenceSync(GLsync handle) const
 {
-    return mState.arrayBuffer.id();
+    return mResourceManager->getFenceSync(uintptr_t(handle));
 }
 
-GLuint Context::getActiveQuery(GLenum target) const
+VertexArray *Context::getVertexArray(GLuint handle) const
 {
-    Query *queryObject = NULL;
-    
-    switch (target)
-    {
-      case GL_ANY_SAMPLES_PASSED_EXT:
-        queryObject = mState.activeQuery[QUERY_ANY_SAMPLES_PASSED].get();
-        break;
-      case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
-        queryObject = mState.activeQuery[QUERY_ANY_SAMPLES_PASSED_CONSERVATIVE].get();
-        break;
-      default:
-        ASSERT(false);
-    }
+    auto vertexArray = mVertexArrayMap.find(handle);
 
-    if (queryObject)
+    if (vertexArray == mVertexArrayMap.end())
     {
-        return queryObject->id();
+        return NULL;
     }
     else
     {
-        return 0;
+        return vertexArray->second;
     }
 }
 
-void Context::setEnableVertexAttribArray(unsigned int attribNum, bool enabled)
-{
-    mState.vertexAttribute[attribNum].mArrayEnabled = enabled;
-}
-
-const VertexAttribute &Context::getVertexAttribState(unsigned int attribNum)
-{
-    return mState.vertexAttribute[attribNum];
-}
-
-void Context::setVertexAttribState(unsigned int attribNum, Buffer *boundBuffer, GLint size, GLenum type, bool normalized,
-                                   GLsizei stride, const void *pointer)
-{
-    mState.vertexAttribute[attribNum].mBoundBuffer.set(boundBuffer);
-    mState.vertexAttribute[attribNum].mSize = size;
-    mState.vertexAttribute[attribNum].mType = type;
-    mState.vertexAttribute[attribNum].mNormalized = normalized;
-    mState.vertexAttribute[attribNum].mStride = stride;
-    mState.vertexAttribute[attribNum].mPointer = pointer;
-}
-
-const void *Context::getVertexAttribPointer(unsigned int attribNum) const
-{
-    return mState.vertexAttribute[attribNum].mPointer;
-}
-
-void Context::setPackAlignment(GLint alignment)
-{
-    mState.packAlignment = alignment;
-}
-
-GLint Context::getPackAlignment() const
-{
-    return mState.packAlignment;
-}
-
-void Context::setUnpackAlignment(GLint alignment)
-{
-    mState.unpackAlignment = alignment;
-}
-
-GLint Context::getUnpackAlignment() const
-{
-    return mState.unpackAlignment;
-}
-
-void Context::setPackReverseRowOrder(bool reverseRowOrder)
-{
-    mState.packReverseRowOrder = reverseRowOrder;
-}
-
-bool Context::getPackReverseRowOrder() const
-{
-    return mState.packReverseRowOrder;
-}
-
-GLuint Context::createBuffer()
-{
-    return mResourceManager->createBuffer();
-}
-
-GLuint Context::createProgram()
-{
-    return mResourceManager->createProgram();
-}
-
-GLuint Context::createShader(GLenum type)
-{
-    return mResourceManager->createShader(type);
-}
-
-GLuint Context::createTexture()
+Sampler *Context::getSampler(GLuint handle) const
 {
-    return mResourceManager->createTexture();
+    return mResourceManager->getSampler(handle);
 }
 
-GLuint Context::createRenderbuffer()
+TransformFeedback *Context::getTransformFeedback(GLuint handle) const
 {
-    return mResourceManager->createRenderbuffer();
+    if (handle == 0)
+    {
+        return mTransformFeedbackZero.get();
+    }
+    else
+    {
+        TransformFeedbackMap::const_iterator iter = mTransformFeedbackMap.find(handle);
+        return (iter != mTransformFeedbackMap.end()) ? iter->second : NULL;
+    }
 }
 
-// Returns an unused framebuffer name
-GLuint Context::createFramebuffer()
+bool Context::isSampler(GLuint samplerName) const
 {
-    GLuint handle = mFramebufferHandleAllocator.allocate();
-
-    mFramebufferMap[handle] = NULL;
-
-    return handle;
+    return mResourceManager->isSampler(samplerName);
 }
 
-GLuint Context::createFence()
+void Context::bindArrayBuffer(unsigned int buffer)
 {
-    GLuint handle = mFenceHandleAllocator.allocate();
-
-    mFenceMap[handle] = new Fence(mRenderer);
+    mResourceManager->checkBufferAllocation(buffer);
 
-    return handle;
+    mState.setArrayBufferBinding(getBuffer(buffer));
 }
 
-// Returns an unused query name
-GLuint Context::createQuery()
+void Context::bindElementArrayBuffer(unsigned int buffer)
 {
-    GLuint handle = mQueryHandleAllocator.allocate();
-
-    mQueryMap[handle] = NULL;
-
-    return handle;
-}
+    mResourceManager->checkBufferAllocation(buffer);
 
-void Context::deleteBuffer(GLuint buffer)
-{
-    if (mResourceManager->getBuffer(buffer))
-    {
-        detachBuffer(buffer);
-    }
-    
-    mResourceManager->deleteBuffer(buffer);
+    mState.getVertexArray()->setElementArrayBuffer(getBuffer(buffer));
 }
 
-void Context::deleteShader(GLuint shader)
+void Context::bindTexture(GLenum target, GLuint texture)
 {
-    mResourceManager->deleteShader(shader);
-}
+    mResourceManager->checkTextureAllocation(texture, target);
 
-void Context::deleteProgram(GLuint program)
-{
-    mResourceManager->deleteProgram(program);
+    mState.setSamplerTexture(target, getTexture(texture));
 }
 
-void Context::deleteTexture(GLuint texture)
+void Context::bindReadFramebuffer(GLuint framebuffer)
 {
-    if (mResourceManager->getTexture(texture))
+    if (!getFramebuffer(framebuffer))
     {
-        detachTexture(texture);
+        mFramebufferMap[framebuffer] = new Framebuffer(mRenderer, framebuffer);
     }
 
-    mResourceManager->deleteTexture(texture);
+    mState.setReadFramebufferBinding(getFramebuffer(framebuffer));
 }
 
-void Context::deleteRenderbuffer(GLuint renderbuffer)
+void Context::bindDrawFramebuffer(GLuint framebuffer)
 {
-    if (mResourceManager->getRenderbuffer(renderbuffer))
+    if (!getFramebuffer(framebuffer))
     {
-        detachRenderbuffer(renderbuffer);
+        mFramebufferMap[framebuffer] = new Framebuffer(mRenderer, framebuffer);
     }
-    
-    mResourceManager->deleteRenderbuffer(renderbuffer);
-}
-
-void Context::deleteFramebuffer(GLuint framebuffer)
-{
-    FramebufferMap::iterator framebufferObject = mFramebufferMap.find(framebuffer);
-
-    if (framebufferObject != mFramebufferMap.end())
-    {
-        detachFramebuffer(framebuffer);
 
-        mFramebufferHandleAllocator.release(framebufferObject->first);
-        delete framebufferObject->second;
-        mFramebufferMap.erase(framebufferObject);
-    }
+    mState.setDrawFramebufferBinding(getFramebuffer(framebuffer));
 }
 
-void Context::deleteFence(GLuint fence)
+void Context::bindRenderbuffer(GLuint renderbuffer)
 {
-    FenceMap::iterator fenceObject = mFenceMap.find(fence);
+    mResourceManager->checkRenderbufferAllocation(renderbuffer);
 
-    if (fenceObject != mFenceMap.end())
-    {
-        mFenceHandleAllocator.release(fenceObject->first);
-        delete fenceObject->second;
-        mFenceMap.erase(fenceObject);
-    }
+    mState.setRenderbufferBinding(getRenderbuffer(renderbuffer));
 }
 
-void Context::deleteQuery(GLuint query)
+void Context::bindVertexArray(GLuint vertexArray)
 {
-    QueryMap::iterator queryObject = mQueryMap.find(query);
-    if (queryObject != mQueryMap.end())
+    if (!getVertexArray(vertexArray))
     {
-        mQueryHandleAllocator.release(queryObject->first);
-        if (queryObject->second)
-        {
-            queryObject->second->release();
-        }
-        mQueryMap.erase(queryObject);
+        VertexArray *vertexArrayObject = new VertexArray(mRenderer->createVertexArray(), vertexArray, MAX_VERTEX_ATTRIBS);
+        mVertexArrayMap[vertexArray] = vertexArrayObject;
     }
-}
-
-Buffer *Context::getBuffer(GLuint handle)
-{
-    return mResourceManager->getBuffer(handle);
-}
 
-Shader *Context::getShader(GLuint handle)
-{
-    return mResourceManager->getShader(handle);
+    mState.setVertexArrayBinding(getVertexArray(vertexArray));
 }
 
-Program *Context::getProgram(GLuint handle)
+void Context::bindSampler(GLuint textureUnit, GLuint sampler)
 {
-    return mResourceManager->getProgram(handle);
-}
+    ASSERT(textureUnit < mCaps.maxCombinedTextureImageUnits);
+    mResourceManager->checkSamplerAllocation(sampler);
 
-Texture *Context::getTexture(GLuint handle)
-{
-    return mResourceManager->getTexture(handle);
+    mState.setSamplerBinding(textureUnit, getSampler(sampler));
 }
 
-Renderbuffer *Context::getRenderbuffer(GLuint handle)
+void Context::bindGenericUniformBuffer(GLuint buffer)
 {
-    return mResourceManager->getRenderbuffer(handle);
-}
+    mResourceManager->checkBufferAllocation(buffer);
 
-Framebuffer *Context::getReadFramebuffer()
-{
-    return getFramebuffer(mState.readFramebuffer);
+    mState.setGenericUniformBufferBinding(getBuffer(buffer));
 }
 
-Framebuffer *Context::getDrawFramebuffer()
-{
-    return mBoundDrawFramebuffer;
-}
-
-void Context::bindArrayBuffer(unsigned int buffer)
+void Context::bindIndexedUniformBuffer(GLuint buffer, GLuint index, GLintptr offset, GLsizeiptr size)
 {
     mResourceManager->checkBufferAllocation(buffer);
 
-    mState.arrayBuffer.set(getBuffer(buffer));
+    mState.setIndexedUniformBufferBinding(index, getBuffer(buffer), offset, size);
 }
 
-void Context::bindElementArrayBuffer(unsigned int buffer)
+void Context::bindGenericTransformFeedbackBuffer(GLuint buffer)
 {
     mResourceManager->checkBufferAllocation(buffer);
 
-    mState.elementArrayBuffer.set(getBuffer(buffer));
+    mState.setGenericTransformFeedbackBufferBinding(getBuffer(buffer));
 }
 
-void Context::bindTexture2D(GLuint texture)
+void Context::bindIndexedTransformFeedbackBuffer(GLuint buffer, GLuint index, GLintptr offset, GLsizeiptr size)
 {
-    mResourceManager->checkTextureAllocation(texture, TEXTURE_2D);
+    mResourceManager->checkBufferAllocation(buffer);
 
-    mState.samplerTexture[TEXTURE_2D][mState.activeSampler].set(getTexture(texture));
+    mState.setIndexedTransformFeedbackBufferBinding(index, getBuffer(buffer), offset, size);
 }
 
-void Context::bindTextureCubeMap(GLuint texture)
+void Context::bindCopyReadBuffer(GLuint buffer)
 {
-    mResourceManager->checkTextureAllocation(texture, TEXTURE_CUBE);
+    mResourceManager->checkBufferAllocation(buffer);
 
-    mState.samplerTexture[TEXTURE_CUBE][mState.activeSampler].set(getTexture(texture));
+    mState.setCopyReadBufferBinding(getBuffer(buffer));
 }
 
-void Context::bindReadFramebuffer(GLuint framebuffer)
+void Context::bindCopyWriteBuffer(GLuint buffer)
 {
-    if (!getFramebuffer(framebuffer))
-    {
-        mFramebufferMap[framebuffer] = new Framebuffer(mRenderer);
-    }
+    mResourceManager->checkBufferAllocation(buffer);
 
-    mState.readFramebuffer = framebuffer;
+    mState.setCopyWriteBufferBinding(getBuffer(buffer));
 }
 
-void Context::bindDrawFramebuffer(GLuint framebuffer)
+void Context::bindPixelPackBuffer(GLuint buffer)
 {
-    if (!getFramebuffer(framebuffer))
-    {
-        mFramebufferMap[framebuffer] = new Framebuffer(mRenderer);
-    }
-
-    mState.drawFramebuffer = framebuffer;
+    mResourceManager->checkBufferAllocation(buffer);
 
-    mBoundDrawFramebuffer = getFramebuffer(framebuffer);
+    mState.setPixelPackBufferBinding(getBuffer(buffer));
 }
 
-void Context::bindRenderbuffer(GLuint renderbuffer)
+void Context::bindPixelUnpackBuffer(GLuint buffer)
 {
-    mResourceManager->checkRenderbufferAllocation(renderbuffer);
+    mResourceManager->checkBufferAllocation(buffer);
 
-    mState.renderbuffer.set(getRenderbuffer(renderbuffer));
+    mState.setPixelUnpackBufferBinding(getBuffer(buffer));
 }
 
 void Context::useProgram(GLuint program)
 {
-    GLuint priorProgram = mState.currentProgram;
-    mState.currentProgram = program;               // Must switch before trying to delete, otherwise it only gets flagged.
+    GLuint priorProgramId = mState.getCurrentProgramId();
+    Program *priorProgram = mResourceManager->getProgram(priorProgramId);
 
-    if (priorProgram != program)
+    if (priorProgramId != program)
     {
-        Program *newProgram = mResourceManager->getProgram(program);
-        Program *oldProgram = mResourceManager->getProgram(priorProgram);
-        mCurrentProgramBinary.set(NULL);
+        mState.setCurrentProgram(program, mResourceManager->getProgram(program));
 
-        if (newProgram)
-        {
-            newProgram->addRef();
-            mCurrentProgramBinary.set(newProgram->getProgramBinary());
-        }
-        
-        if (oldProgram)
+        if (priorProgram)
         {
-            oldProgram->release();
+            priorProgram->release();
         }
     }
 }
@@ -939,163 +644,116 @@ void Context::linkProgram(GLuint program)
 {
     Program *programObject = mResourceManager->getProgram(program);
 
-    bool linked = programObject->link();
+    bool linked = programObject->link(getCaps());
 
     // if the current program was relinked successfully we
     // need to install the new executables
-    if (linked && program == mState.currentProgram)
+    if (linked && program == mState.getCurrentProgramId())
     {
-        mCurrentProgramBinary.set(programObject->getProgramBinary());
+        mState.setCurrentProgramBinary(programObject->getProgramBinary());
     }
 }
 
-void Context::setProgramBinary(GLuint program, const void *binary, GLint length)
+void Context::setProgramBinary(GLuint program, GLenum binaryFormat, const void *binary, GLint length)
 {
     Program *programObject = mResourceManager->getProgram(program);
 
-    bool loaded = programObject->setProgramBinary(binary, length);
+    bool loaded = programObject->setProgramBinary(binaryFormat, binary, length);
 
     // if the current program was reloaded successfully we
     // need to install the new executables
-    if (loaded && program == mState.currentProgram)
+    if (loaded && program == mState.getCurrentProgramId())
     {
-        mCurrentProgramBinary.set(programObject->getProgramBinary());
+        mState.setCurrentProgramBinary(programObject->getProgramBinary());
     }
 
 }
 
-void Context::beginQuery(GLenum target, GLuint query)
+void Context::bindTransformFeedback(GLuint transformFeedback)
 {
-    // From EXT_occlusion_query_boolean: If BeginQueryEXT is called with an <id>  
-    // of zero, if the active query object name for <target> is non-zero (for the  
-    // targets ANY_SAMPLES_PASSED_EXT and ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, if  
-    // the active query for either target is non-zero), if <id> is the name of an 
-    // existing query object whose type does not match <target>, or if <id> is the
-    // active query object name for any query type, the error INVALID_OPERATION is
-    // generated.
+    mState.setTransformFeedbackBinding(getTransformFeedback(transformFeedback));
+}
 
-    // Ensure no other queries are active
-    // NOTE: If other queries than occlusion are supported, we will need to check
-    // separately that:
-    //    a) The query ID passed is not the current active query for any target/type
-    //    b) There are no active queries for the requested target (and in the case
-    //       of GL_ANY_SAMPLES_PASSED_EXT and GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT,
-    //       no query may be active for either if glBeginQuery targets either.
-    for (int i = 0; i < QUERY_TYPE_COUNT; i++)
-    {
-        if (mState.activeQuery[i].get() != NULL)
-        {
-            return gl::error(GL_INVALID_OPERATION);
-        }
-    }
+Error Context::beginQuery(GLenum target, GLuint query)
+{
+    Query *queryObject = getQuery(query, true, target);
+    ASSERT(queryObject);
 
-    QueryType qType;
-    switch (target)
+    // begin query
+    Error error = queryObject->begin();
+    if (error.isError())
     {
-      case GL_ANY_SAMPLES_PASSED_EXT: 
-        qType = QUERY_ANY_SAMPLES_PASSED; 
-        break;
-      case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT: 
-        qType = QUERY_ANY_SAMPLES_PASSED_CONSERVATIVE; 
-        break;
-      default: 
-        ASSERT(false);
-        return;
+        return error;
     }
 
-    Query *queryObject = getQuery(query, true, target);
+    // set query as active for specified target only if begin succeeded
+    mState.setActiveQuery(target, queryObject);
 
-    // check that name was obtained with glGenQueries
-    if (!queryObject)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
+    return Error(GL_NO_ERROR);
+}
 
-    // check for type mismatch
-    if (queryObject->getType() != target)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
+Error Context::endQuery(GLenum target)
+{
+    Query *queryObject = mState.getActiveQuery(target);
+    ASSERT(queryObject);
 
-    // set query as active for specified target
-    mState.activeQuery[qType].set(queryObject);
+    gl::Error error = queryObject->end();
 
-    // begin query
-    queryObject->begin();
+    // Always unbind the query, even if there was an error. This may delete the query object.
+    mState.setActiveQuery(target, NULL);
+
+    return error;
 }
 
-void Context::endQuery(GLenum target)
+void Context::setFramebufferZero(Framebuffer *buffer)
 {
-    QueryType qType;
-
-    switch (target)
+    // First, check to see if the old default framebuffer
+    // was set for draw or read framebuffer, and change
+    // the bindings to point to the new one before deleting it.
+    if (mState.getDrawFramebuffer()->id() == 0)
     {
-      case GL_ANY_SAMPLES_PASSED_EXT: 
-        qType = QUERY_ANY_SAMPLES_PASSED; 
-        break;
-      case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT: 
-        qType = QUERY_ANY_SAMPLES_PASSED_CONSERVATIVE; 
-        break;
-      default: 
-        ASSERT(false);
-        return;
+        mState.setDrawFramebufferBinding(buffer);
     }
 
-    Query *queryObject = mState.activeQuery[qType].get();
-
-    if (queryObject == NULL)
+    if (mState.getReadFramebuffer()->id() == 0)
     {
-        return gl::error(GL_INVALID_OPERATION);
+        mState.setReadFramebufferBinding(buffer);
     }
 
-    queryObject->end();
-
-    mState.activeQuery[qType].set(NULL);
-}
-
-void Context::setFramebufferZero(Framebuffer *buffer)
-{
     delete mFramebufferMap[0];
     mFramebufferMap[0] = buffer;
-    if (mState.drawFramebuffer == 0)
-    {
-        mBoundDrawFramebuffer = buffer;
-    }
 }
 
 void Context::setRenderbufferStorage(GLsizei width, GLsizei height, GLenum internalformat, GLsizei samples)
 {
+    ASSERT(getTextureCaps().get(internalformat).renderable);
+
     RenderbufferStorage *renderbuffer = NULL;
-    switch (internalformat)
+
+    const InternalFormat &formatInfo = GetInternalFormatInfo(internalformat);
+    if (formatInfo.depthBits > 0 && formatInfo.stencilBits > 0)
+    {
+        renderbuffer = new gl::DepthStencilbuffer(mRenderer, width, height, samples);
+    }
+    else if (formatInfo.depthBits > 0)
     {
-      case GL_DEPTH_COMPONENT16:
         renderbuffer = new gl::Depthbuffer(mRenderer, width, height, samples);
-        break;
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGB565:
-      case GL_RGB8_OES:
-      case GL_RGBA8_OES:
-      case GL_BGRA8_EXT:
-        renderbuffer = new gl::Colorbuffer(mRenderer,width, height, internalformat, samples);
-        break;
-      case GL_STENCIL_INDEX8:
+    }
+    else if (formatInfo.stencilBits > 0)
+    {
         renderbuffer = new gl::Stencilbuffer(mRenderer, width, height, samples);
-        break;
-      case GL_DEPTH24_STENCIL8_OES:
-        renderbuffer = new gl::DepthStencilbuffer(mRenderer, width, height, samples);
-        break;
-      default:
-        UNREACHABLE(); return;
+    }
+    else
+    {
+        renderbuffer = new gl::Colorbuffer(mRenderer, width, height, internalformat, samples);
     }
 
-    Renderbuffer *renderbufferObject = mState.renderbuffer.get();
-    renderbufferObject->setStorage(renderbuffer);
+    mState.getCurrentRenderbuffer()->setStorage(renderbuffer);
 }
 
-Framebuffer *Context::getFramebuffer(unsigned int handle)
+Framebuffer *Context::getFramebuffer(unsigned int handle) const
 {
-    FramebufferMap::iterator framebuffer = mFramebufferMap.find(handle);
+    FramebufferMap::const_iterator framebuffer = mFramebufferMap.find(handle);
 
     if (framebuffer == mFramebufferMap.end())
     {
@@ -1107,11 +765,11 @@ Framebuffer *Context::getFramebuffer(unsigned int handle)
     }
 }
 
-Fence *Context::getFence(unsigned int handle)
+FenceNV *Context::getFenceNV(unsigned int handle)
 {
-    FenceMap::iterator fence = mFenceMap.find(handle);
+    FenceNVMap::iterator fence = mFenceNVMap.find(handle);
 
-    if (fence == mFenceMap.end())
+    if (fence == mFenceNVMap.end())
     {
         return NULL;
     }
@@ -1133,397 +791,225 @@ Query *Context::getQuery(unsigned int handle, bool create, GLenum type)
     {
         if (!query->second && create)
         {
-            query->second = new Query(mRenderer, type, handle);
+            query->second = new Query(mRenderer->createQuery(type), handle);
             query->second->addRef();
         }
         return query->second;
     }
 }
 
-Buffer *Context::getArrayBuffer()
+Texture *Context::getTargetTexture(GLenum target) const
 {
-    return mState.arrayBuffer.get();
+    if (!ValidTextureTarget(this, target))
+    {
+        return NULL;
+    }
+
+    switch (target)
+    {
+      case GL_TEXTURE_2D:       return getTexture2D();
+      case GL_TEXTURE_CUBE_MAP: return getTextureCubeMap();
+      case GL_TEXTURE_3D:       return getTexture3D();
+      case GL_TEXTURE_2D_ARRAY: return getTexture2DArray();
+      default:                  return NULL;
+    }
 }
 
-Buffer *Context::getElementArrayBuffer()
+Texture2D *Context::getTexture2D() const
 {
-    return mState.elementArrayBuffer.get();
+    return static_cast<Texture2D*>(getSamplerTexture(mState.getActiveSampler(), GL_TEXTURE_2D));
 }
 
-ProgramBinary *Context::getCurrentProgramBinary()
+TextureCubeMap *Context::getTextureCubeMap() const
 {
-    return mCurrentProgramBinary.get();
+    return static_cast<TextureCubeMap*>(getSamplerTexture(mState.getActiveSampler(), GL_TEXTURE_CUBE_MAP));
 }
 
-Texture2D *Context::getTexture2D()
+Texture3D *Context::getTexture3D() const
 {
-    return static_cast<Texture2D*>(getSamplerTexture(mState.activeSampler, TEXTURE_2D));
+    return static_cast<Texture3D*>(getSamplerTexture(mState.getActiveSampler(), GL_TEXTURE_3D));
 }
 
-TextureCubeMap *Context::getTextureCubeMap()
+Texture2DArray *Context::getTexture2DArray() const
 {
-    return static_cast<TextureCubeMap*>(getSamplerTexture(mState.activeSampler, TEXTURE_CUBE));
+    return static_cast<Texture2DArray*>(getSamplerTexture(mState.getActiveSampler(), GL_TEXTURE_2D_ARRAY));
 }
 
-Texture *Context::getSamplerTexture(unsigned int sampler, TextureType type)
+Texture *Context::getSamplerTexture(unsigned int sampler, GLenum type) const
 {
-    GLuint texid = mState.samplerTexture[type][sampler].id();
-
-    if (texid == 0)   // Special case: 0 refers to different initial textures based on the target
+    if (mState.getSamplerTextureId(sampler, type) == 0)
     {
-        switch (type)
-        {
-          default: UNREACHABLE();
-          case TEXTURE_2D: return mTexture2DZero.get();
-          case TEXTURE_CUBE: return mTextureCubeMapZero.get();
-        }
+        return mZeroTextures.at(type).get();
+    }
+    else
+    {
+        return mState.getSamplerTexture(sampler, type);
     }
-
-    return mState.samplerTexture[type][sampler].get();
 }
 
-bool Context::getBooleanv(GLenum pname, GLboolean *params)
+void Context::getBooleanv(GLenum pname, GLboolean *params)
 {
     switch (pname)
     {
       case GL_SHADER_COMPILER:           *params = GL_TRUE;                             break;
-      case GL_SAMPLE_COVERAGE_INVERT:    *params = mState.sampleCoverageInvert;         break;
-      case GL_DEPTH_WRITEMASK:           *params = mState.depthStencil.depthMask;       break;
-      case GL_COLOR_WRITEMASK:
-        params[0] = mState.blend.colorMaskRed;
-        params[1] = mState.blend.colorMaskGreen;
-        params[2] = mState.blend.colorMaskBlue;
-        params[3] = mState.blend.colorMaskAlpha;
-        break;
-      case GL_CULL_FACE:                 *params = mState.rasterizer.cullFace;          break;
-      case GL_POLYGON_OFFSET_FILL:       *params = mState.rasterizer.polygonOffsetFill; break;
-      case GL_SAMPLE_ALPHA_TO_COVERAGE:  *params = mState.blend.sampleAlphaToCoverage;  break;
-      case GL_SAMPLE_COVERAGE:           *params = mState.sampleCoverage;               break;
-      case GL_SCISSOR_TEST:              *params = mState.scissorTest;                  break;
-      case GL_STENCIL_TEST:              *params = mState.depthStencil.stencilTest;     break;
-      case GL_DEPTH_TEST:                *params = mState.depthStencil.depthTest;       break;
-      case GL_BLEND:                     *params = mState.blend.blend;                  break;
-      case GL_DITHER:                    *params = mState.blend.dither;                 break;
       case GL_CONTEXT_ROBUST_ACCESS_EXT: *params = mRobustAccess ? GL_TRUE : GL_FALSE;  break;
       default:
-        return false;
+        mState.getBooleanv(pname, params);
+        break;
     }
-
-    return true;
 }
 
-bool Context::getFloatv(GLenum pname, GLfloat *params)
+void Context::getFloatv(GLenum pname, GLfloat *params)
 {
-    // Please note: DEPTH_CLEAR_VALUE is included in our internal getFloatv implementation
-    // because it is stored as a float, despite the fact that the GL ES 2.0 spec names
-    // GetIntegerv as its native query function. As it would require conversion in any
-    // case, this should make no difference to the calling application.
+    // Queries about context capabilities and maximums are answered by Context.
+    // Queries about current GL state values are answered by State.
     switch (pname)
     {
-      case GL_LINE_WIDTH:               *params = mState.lineWidth;                         break;
-      case GL_SAMPLE_COVERAGE_VALUE:    *params = mState.sampleCoverageValue;               break;
-      case GL_DEPTH_CLEAR_VALUE:        *params = mState.depthClearValue;                   break;
-      case GL_POLYGON_OFFSET_FACTOR:    *params = mState.rasterizer.polygonOffsetFactor;    break;
-      case GL_POLYGON_OFFSET_UNITS:     *params = mState.rasterizer.polygonOffsetUnits;     break;
       case GL_ALIASED_LINE_WIDTH_RANGE:
-        params[0] = gl::ALIASED_LINE_WIDTH_RANGE_MIN;
-        params[1] = gl::ALIASED_LINE_WIDTH_RANGE_MAX;
+        params[0] = mCaps.minAliasedLineWidth;
+        params[1] = mCaps.maxAliasedLineWidth;
         break;
       case GL_ALIASED_POINT_SIZE_RANGE:
-        params[0] = gl::ALIASED_POINT_SIZE_RANGE_MIN;
-        params[1] = getMaximumPointSize();
-        break;
-      case GL_DEPTH_RANGE:
-        params[0] = mState.zNear;
-        params[1] = mState.zFar;
-        break;
-      case GL_COLOR_CLEAR_VALUE:
-        params[0] = mState.colorClearValue.red;
-        params[1] = mState.colorClearValue.green;
-        params[2] = mState.colorClearValue.blue;
-        params[3] = mState.colorClearValue.alpha;
-        break;
-      case GL_BLEND_COLOR:
-        params[0] = mState.blendColor.red;
-        params[1] = mState.blendColor.green;
-        params[2] = mState.blendColor.blue;
-        params[3] = mState.blendColor.alpha;
+        params[0] = mCaps.minAliasedPointSize;
+        params[1] = mCaps.maxAliasedPointSize;
         break;
       case GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT:
-        if (!supportsTextureFilterAnisotropy())
-        {
-            return false;
-        }
-        *params = mMaxTextureAnisotropy;
+        ASSERT(mExtensions.textureFilterAnisotropic);
+        *params = mExtensions.maxTextureAnisotropy;
         break;
       default:
-        return false;
+        mState.getFloatv(pname, params);
+        break;
     }
-
-    return true;
 }
 
-bool Context::getIntegerv(GLenum pname, GLint *params)
+void Context::getIntegerv(GLenum pname, GLint *params)
 {
-    if (pname >= GL_DRAW_BUFFER0_EXT && pname <= GL_DRAW_BUFFER15_EXT)
-    {
-        unsigned int colorAttachment = (pname - GL_DRAW_BUFFER0_EXT);
-
-        if (colorAttachment >= mRenderer->getMaxRenderTargets())
-        {
-            // return true to stop further operation in the parent call
-            return gl::error(GL_INVALID_OPERATION, true);
-        }
-
-        Framebuffer *framebuffer = getDrawFramebuffer();
+    // Queries about context capabilities and maximums are answered by Context.
+    // Queries about current GL state values are answered by State.
 
-        *params = framebuffer->getDrawBufferState(colorAttachment);
-        return true;
-    }
-
-    // Please note: DEPTH_CLEAR_VALUE is not included in our internal getIntegerv implementation
-    // because it is stored as a float, despite the fact that the GL ES 2.0 spec names
-    // GetIntegerv as its native query function. As it would require conversion in any
-    // case, this should make no difference to the calling application. You may find it in 
-    // Context::getFloatv.
     switch (pname)
     {
-      case GL_MAX_VERTEX_ATTRIBS:               *params = gl::MAX_VERTEX_ATTRIBS;               break;
-      case GL_MAX_VERTEX_UNIFORM_VECTORS:       *params = mRenderer->getMaxVertexUniformVectors(); break;
-      case GL_MAX_VARYING_VECTORS:              *params = mRenderer->getMaxVaryingVectors();    break;
-      case GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS: *params = mRenderer->getMaxCombinedTextureImageUnits(); break;
-      case GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS:   *params = mRenderer->getMaxVertexTextureImageUnits(); break;
-      case GL_MAX_TEXTURE_IMAGE_UNITS:          *params = gl::MAX_TEXTURE_IMAGE_UNITS;          break;
-      case GL_MAX_FRAGMENT_UNIFORM_VECTORS:     *params = mRenderer->getMaxFragmentUniformVectors(); break;
-      case GL_MAX_RENDERBUFFER_SIZE:            *params = getMaximumRenderbufferDimension();    break;
-      case GL_MAX_COLOR_ATTACHMENTS_EXT:        *params = mRenderer->getMaxRenderTargets();     break;
-      case GL_MAX_DRAW_BUFFERS_EXT:             *params = mRenderer->getMaxRenderTargets();     break;
-      case GL_NUM_SHADER_BINARY_FORMATS:        *params = 0;                                    break;
-      case GL_SHADER_BINARY_FORMATS:      /* no shader binary formats are supported */          break;
-      case GL_ARRAY_BUFFER_BINDING:             *params = mState.arrayBuffer.id();              break;
-      case GL_ELEMENT_ARRAY_BUFFER_BINDING:     *params = mState.elementArrayBuffer.id();       break;
-      //case GL_FRAMEBUFFER_BINDING:            // now equivalent to GL_DRAW_FRAMEBUFFER_BINDING_ANGLE
-      case GL_DRAW_FRAMEBUFFER_BINDING_ANGLE:   *params = mState.drawFramebuffer;               break;
-      case GL_READ_FRAMEBUFFER_BINDING_ANGLE:   *params = mState.readFramebuffer;               break;
-      case GL_RENDERBUFFER_BINDING:             *params = mState.renderbuffer.id();             break;
-      case GL_CURRENT_PROGRAM:                  *params = mState.currentProgram;                break;
-      case GL_PACK_ALIGNMENT:                   *params = mState.packAlignment;                 break;
-      case GL_PACK_REVERSE_ROW_ORDER_ANGLE:     *params = mState.packReverseRowOrder;           break;
-      case GL_UNPACK_ALIGNMENT:                 *params = mState.unpackAlignment;               break;
-      case GL_GENERATE_MIPMAP_HINT:             *params = mState.generateMipmapHint;            break;
-      case GL_FRAGMENT_SHADER_DERIVATIVE_HINT_OES: *params = mState.fragmentShaderDerivativeHint; break;
-      case GL_ACTIVE_TEXTURE:                   *params = (mState.activeSampler + GL_TEXTURE0); break;
-      case GL_STENCIL_FUNC:                     *params = mState.depthStencil.stencilFunc;             break;
-      case GL_STENCIL_REF:                      *params = mState.stencilRef;                           break;
-      case GL_STENCIL_VALUE_MASK:               *params = mState.depthStencil.stencilMask;             break;
-      case GL_STENCIL_BACK_FUNC:                *params = mState.depthStencil.stencilBackFunc;         break;
-      case GL_STENCIL_BACK_REF:                 *params = mState.stencilBackRef;                       break;
-      case GL_STENCIL_BACK_VALUE_MASK:          *params = mState.depthStencil.stencilBackMask;         break;
-      case GL_STENCIL_FAIL:                     *params = mState.depthStencil.stencilFail;             break;
-      case GL_STENCIL_PASS_DEPTH_FAIL:          *params = mState.depthStencil.stencilPassDepthFail;    break;
-      case GL_STENCIL_PASS_DEPTH_PASS:          *params = mState.depthStencil.stencilPassDepthPass;    break;
-      case GL_STENCIL_BACK_FAIL:                *params = mState.depthStencil.stencilBackFail;         break;
-      case GL_STENCIL_BACK_PASS_DEPTH_FAIL:     *params = mState.depthStencil.stencilBackPassDepthFail; break;
-      case GL_STENCIL_BACK_PASS_DEPTH_PASS:     *params = mState.depthStencil.stencilBackPassDepthPass; break;
-      case GL_DEPTH_FUNC:                       *params = mState.depthStencil.depthFunc;               break;
-      case GL_BLEND_SRC_RGB:                    *params = mState.blend.sourceBlendRGB;                 break;
-      case GL_BLEND_SRC_ALPHA:                  *params = mState.blend.sourceBlendAlpha;               break;
-      case GL_BLEND_DST_RGB:                    *params = mState.blend.destBlendRGB;                   break;
-      case GL_BLEND_DST_ALPHA:                  *params = mState.blend.destBlendAlpha;                 break;
-      case GL_BLEND_EQUATION_RGB:               *params = mState.blend.blendEquationRGB;               break;
-      case GL_BLEND_EQUATION_ALPHA:             *params = mState.blend.blendEquationAlpha;             break;
-      case GL_STENCIL_WRITEMASK:                *params = mState.depthStencil.stencilWritemask;        break;
-      case GL_STENCIL_BACK_WRITEMASK:           *params = mState.depthStencil.stencilBackWritemask;    break;
-      case GL_STENCIL_CLEAR_VALUE:              *params = mState.stencilClearValue;             break;
-      case GL_SUBPIXEL_BITS:                    *params = 4;                                    break;
-      case GL_MAX_TEXTURE_SIZE:                 *params = getMaximumTextureDimension();         break;
-      case GL_MAX_CUBE_MAP_TEXTURE_SIZE:        *params = getMaximumCubeTextureDimension();     break;
-      case GL_NUM_COMPRESSED_TEXTURE_FORMATS:   
-        params[0] = mNumCompressedTextureFormats;
-        break;
-      case GL_MAX_SAMPLES_ANGLE:
-        {
-            GLsizei maxSamples = getMaxSupportedSamples();
-            if (maxSamples != 0)
-            {
-                *params = maxSamples;
-            }
-            else
-            {
-                return false;
-            }
-
-            break;
-        }
-      case GL_SAMPLE_BUFFERS:                   
-      case GL_SAMPLES:
-        {
-            gl::Framebuffer *framebuffer = getDrawFramebuffer();
-            if (framebuffer->completeness() == GL_FRAMEBUFFER_COMPLETE)
-            {
-                switch (pname)
-                {
-                  case GL_SAMPLE_BUFFERS:
-                    if (framebuffer->getSamples() != 0)
-                    {
-                        *params = 1;
-                    }
-                    else
-                    {
-                        *params = 0;
-                    }
-                    break;
-                  case GL_SAMPLES:
-                    *params = framebuffer->getSamples();
-                    break;
-                }
-            }
-            else 
-            {
-                *params = 0;
-            }
-        }
-        break;
+      case GL_MAX_VERTEX_ATTRIBS:                       *params = mCaps.maxVertexAttributes;                            break;
+      case GL_MAX_VERTEX_UNIFORM_VECTORS:               *params = mCaps.maxVertexUniformVectors;                        break;
+      case GL_MAX_VERTEX_UNIFORM_COMPONENTS:            *params = mCaps.maxVertexUniformComponents;                     break;
+      case GL_MAX_VARYING_VECTORS:                      *params = mCaps.maxVaryingVectors;                              break;
+      case GL_MAX_VARYING_COMPONENTS:                   *params = mCaps.maxVertexOutputComponents;                      break;
+      case GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS:         *params = mCaps.maxCombinedTextureImageUnits;                   break;
+      case GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS:           *params = mCaps.maxVertexTextureImageUnits;                     break;
+      case GL_MAX_TEXTURE_IMAGE_UNITS:                  *params = mCaps.maxTextureImageUnits;                           break;
+      case GL_MAX_FRAGMENT_UNIFORM_VECTORS:             *params = mCaps.maxFragmentUniformVectors;                      break;
+      case GL_MAX_FRAGMENT_UNIFORM_COMPONENTS:          *params = mCaps.maxFragmentInputComponents;                     break;
+      case GL_MAX_RENDERBUFFER_SIZE:                    *params = mCaps.maxRenderbufferSize;                            break;
+      case GL_MAX_COLOR_ATTACHMENTS_EXT:                *params = mCaps.maxColorAttachments;                            break;
+      case GL_MAX_DRAW_BUFFERS_EXT:                     *params = mCaps.maxDrawBuffers;                                 break;
+      //case GL_FRAMEBUFFER_BINDING:                    // now equivalent to GL_DRAW_FRAMEBUFFER_BINDING_ANGLE
+      case GL_SUBPIXEL_BITS:                            *params = 4;                                                    break;
+      case GL_MAX_TEXTURE_SIZE:                         *params = mCaps.max2DTextureSize;                               break;
+      case GL_MAX_CUBE_MAP_TEXTURE_SIZE:                *params = mCaps.maxCubeMapTextureSize;                          break;
+      case GL_MAX_3D_TEXTURE_SIZE:                      *params = mCaps.max3DTextureSize;                               break;
+      case GL_MAX_ARRAY_TEXTURE_LAYERS:                 *params = mCaps.maxArrayTextureLayers;                          break;
+      case GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT:          *params = mCaps.uniformBufferOffsetAlignment;                   break;
+      case GL_MAX_UNIFORM_BUFFER_BINDINGS:              *params = mCaps.maxUniformBufferBindings;                       break;
+      case GL_MAX_VERTEX_UNIFORM_BLOCKS:                *params = mCaps.maxVertexUniformBlocks;                         break;
+      case GL_MAX_FRAGMENT_UNIFORM_BLOCKS:              *params = mCaps.maxFragmentUniformBlocks;                       break;
+      case GL_MAX_COMBINED_UNIFORM_BLOCKS:              *params = mCaps.maxCombinedTextureImageUnits;                   break;
+      case GL_MAJOR_VERSION:                            *params = mClientVersion;                                       break;
+      case GL_MINOR_VERSION:                            *params = 0;                                                    break;
+      case GL_MAX_ELEMENTS_INDICES:                     *params = mCaps.maxElementsIndices;                             break;
+      case GL_MAX_ELEMENTS_VERTICES:                    *params = mCaps.maxElementsVertices;                            break;
+      case GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS: *params = mCaps.maxTransformFeedbackInterleavedComponents; break;
+      case GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS:       *params = mCaps.maxTransformFeedbackSeparateAttributes;    break;
+      case GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS:    *params = mCaps.maxTransformFeedbackSeparateComponents;    break;
+      case GL_NUM_COMPRESSED_TEXTURE_FORMATS:           *params = mCaps.compressedTextureFormats.size();                break;
+      case GL_MAX_SAMPLES_ANGLE:                        *params = mExtensions.maxSamples;                               break;
       case GL_IMPLEMENTATION_COLOR_READ_TYPE:
       case GL_IMPLEMENTATION_COLOR_READ_FORMAT:
         {
-            GLenum format, type;
-            if (getCurrentReadFormatType(&format, &type))
-            {
-                if (pname == GL_IMPLEMENTATION_COLOR_READ_FORMAT)
-                    *params = format;
-                else
-                    *params = type;
-            }
+            GLenum internalFormat, format, type;
+            getCurrentReadFormatType(&internalFormat, &format, &type);
+            if (pname == GL_IMPLEMENTATION_COLOR_READ_FORMAT)
+                *params = format;
+            else
+                *params = type;
         }
         break;
       case GL_MAX_VIEWPORT_DIMS:
         {
-            params[0] = mMaxViewportDimension;
-            params[1] = mMaxViewportDimension;
+            params[0] = mCaps.maxViewportWidth;
+            params[1] = mCaps.maxViewportHeight;
         }
         break;
       case GL_COMPRESSED_TEXTURE_FORMATS:
-        {
-            if (supportsDXT1Textures())
-            {
-                *params++ = GL_COMPRESSED_RGB_S3TC_DXT1_EXT;
-                *params++ = GL_COMPRESSED_RGBA_S3TC_DXT1_EXT;
-            }
-            if (supportsDXT3Textures())
-            {
-                *params++ = GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE;
-            }
-            if (supportsDXT5Textures())
-            {
-                *params++ = GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE;
-            }
-        }
+        std::copy(mCaps.compressedTextureFormats.begin(), mCaps.compressedTextureFormats.end(), params);
         break;
-      case GL_VIEWPORT:
-        params[0] = mState.viewport.x;
-        params[1] = mState.viewport.y;
-        params[2] = mState.viewport.width;
-        params[3] = mState.viewport.height;
+      case GL_RESET_NOTIFICATION_STRATEGY_EXT:
+        *params = mResetStrategy;
         break;
-      case GL_SCISSOR_BOX:
-        params[0] = mState.scissor.x;
-        params[1] = mState.scissor.y;
-        params[2] = mState.scissor.width;
-        params[3] = mState.scissor.height;
+      case GL_NUM_SHADER_BINARY_FORMATS:
+        *params = mCaps.shaderBinaryFormats.size();
         break;
-      case GL_CULL_FACE_MODE:                   *params = mState.rasterizer.cullMode;   break;
-      case GL_FRONT_FACE:                       *params = mState.rasterizer.frontFace;  break;
-      case GL_RED_BITS:
-      case GL_GREEN_BITS:
-      case GL_BLUE_BITS:
-      case GL_ALPHA_BITS:
-        {
-            gl::Framebuffer *framebuffer = getDrawFramebuffer();
-            gl::Renderbuffer *colorbuffer = framebuffer->getFirstColorbuffer();
-
-            if (colorbuffer)
-            {
-                switch (pname)
-                {
-                  case GL_RED_BITS:   *params = colorbuffer->getRedSize();      break;
-                  case GL_GREEN_BITS: *params = colorbuffer->getGreenSize();    break;
-                  case GL_BLUE_BITS:  *params = colorbuffer->getBlueSize();     break;
-                  case GL_ALPHA_BITS: *params = colorbuffer->getAlphaSize();    break;
-                }
-            }
-            else
-            {
-                *params = 0;
-            }
-        }
+      case GL_SHADER_BINARY_FORMATS:
+        std::copy(mCaps.shaderBinaryFormats.begin(), mCaps.shaderBinaryFormats.end(), params);
         break;
-      case GL_DEPTH_BITS:
-        {
-            gl::Framebuffer *framebuffer = getDrawFramebuffer();
-            gl::Renderbuffer *depthbuffer = framebuffer->getDepthbuffer();
-
-            if (depthbuffer)
-            {
-                *params = depthbuffer->getDepthSize();
-            }
-            else
-            {
-                *params = 0;
-            }
-        }
+      case GL_NUM_PROGRAM_BINARY_FORMATS:
+        *params = mCaps.programBinaryFormats.size();
         break;
-      case GL_STENCIL_BITS:
-        {
-            gl::Framebuffer *framebuffer = getDrawFramebuffer();
-            gl::Renderbuffer *stencilbuffer = framebuffer->getStencilbuffer();
-
-            if (stencilbuffer)
-            {
-                *params = stencilbuffer->getStencilSize();
-            }
-            else
-            {
-                *params = 0;
-            }
-        }
+      case GL_PROGRAM_BINARY_FORMATS:
+        std::copy(mCaps.programBinaryFormats.begin(), mCaps.programBinaryFormats.end(), params);
         break;
-      case GL_TEXTURE_BINDING_2D:
-        {
-            if (mState.activeSampler > mRenderer->getMaxCombinedTextureImageUnits() - 1)
-            {
-                gl::error(GL_INVALID_OPERATION);
-                return false;
-            }
-
-            *params = mState.samplerTexture[TEXTURE_2D][mState.activeSampler].id();
-        }
+      case GL_NUM_EXTENSIONS:
+        *params = static_cast<GLint>(mExtensionStrings.size());
         break;
-      case GL_TEXTURE_BINDING_CUBE_MAP:
-        {
-            if (mState.activeSampler > mRenderer->getMaxCombinedTextureImageUnits() - 1)
-            {
-                gl::error(GL_INVALID_OPERATION);
-                return false;
-            }
+      default:
+        mState.getIntegerv(pname, params);
+        break;
+    }
+}
 
-            *params = mState.samplerTexture[TEXTURE_CUBE][mState.activeSampler].id();
-        }
+void Context::getInteger64v(GLenum pname, GLint64 *params)
+{
+    // Queries about context capabilities and maximums are answered by Context.
+    // Queries about current GL state values are answered by State.
+    switch (pname)
+    {
+      case GL_MAX_ELEMENT_INDEX:
+        *params = mCaps.maxElementIndex;
         break;
-      case GL_RESET_NOTIFICATION_STRATEGY_EXT:
-        *params = mResetStrategy;
+      case GL_MAX_UNIFORM_BLOCK_SIZE:
+        *params = mCaps.maxUniformBlockSize;
         break;
-      case GL_NUM_PROGRAM_BINARY_FORMATS_OES:
-        *params = 1;
+      case GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS:
+        *params = mCaps.maxCombinedVertexUniformComponents;
         break;
-      case GL_PROGRAM_BINARY_FORMATS_OES:
-        *params = GL_PROGRAM_BINARY_ANGLE;
+      case GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS:
+        *params = mCaps.maxCombinedFragmentUniformComponents;
+        break;
+      case GL_MAX_SERVER_WAIT_TIMEOUT:
+        *params = mCaps.maxServerWaitTimeout;
         break;
       default:
-        return false;
+        UNREACHABLE();
+        break;
     }
+}
+
+bool Context::getIndexedIntegerv(GLenum target, GLuint index, GLint *data)
+{
+    // Queries about context capabilities and maximums are answered by Context.
+    // Queries about current GL state values are answered by State.
+    // Indexed integer queries all refer to current state, so this function is a 
+    // mere passthrough.
+    return mState.getIndexedIntegerv(target, index, data);
+}
 
-    return true;
+bool Context::getIndexedInteger64v(GLenum target, GLuint index, GLint64 *data)
+{
+    // Queries about context capabilities and maximums are answered by Context.
+    // Queries about current GL state values are answered by State.
+    // Indexed integer queries all refer to current state, so this function is a 
+    // mere passthrough.
+    return mState.getIndexedInteger64v(target, index, data);
 }
 
 bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *numParams)
@@ -1538,7 +1024,7 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
     // Please note: the query type returned for DEPTH_CLEAR_VALUE in this implementation
     // is FLOAT rather than INT, as would be suggested by the GL ES 2.0 spec. This is due
     // to the fact that it is stored internally as a float, and so would require conversion
-    // if returned from Context::getIntegerv. Since this conversion is already implemented 
+    // if returned from Context::getIntegerv. Since this conversion is already implemented
     // in the case that one calls glGetIntegerv to retrieve a float-typed state variable, we
     // place DEPTH_CLEAR_VALUE with the floats. This should make no difference to the calling
     // application.
@@ -1547,15 +1033,21 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
       case GL_COMPRESSED_TEXTURE_FORMATS:
         {
             *type = GL_INT;
-            *numParams = mNumCompressedTextureFormats;
+            *numParams = mCaps.compressedTextureFormats.size();
         }
-        break;
+        return true;
+      case GL_PROGRAM_BINARY_FORMATS_OES:
+        {
+            *type = GL_INT;
+            *numParams = mCaps.programBinaryFormats.size();
+        }
+        return true;
       case GL_SHADER_BINARY_FORMATS:
         {
             *type = GL_INT;
-            *numParams = 0;
+            *numParams = mCaps.shaderBinaryFormats.size();
         }
-        break;
+        return true;
       case GL_MAX_VERTEX_ATTRIBS:
       case GL_MAX_VERTEX_UNIFORM_VECTORS:
       case GL_MAX_VARYING_VECTORS:
@@ -1569,7 +1061,9 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
       case GL_NUM_SHADER_BINARY_FORMATS:
       case GL_NUM_COMPRESSED_TEXTURE_FORMATS:
       case GL_ARRAY_BUFFER_BINDING:
-      case GL_FRAMEBUFFER_BINDING:
+      //case GL_FRAMEBUFFER_BINDING: // equivalent to DRAW_FRAMEBUFFER_BINDING_ANGLE
+      case GL_DRAW_FRAMEBUFFER_BINDING_ANGLE:
+      case GL_READ_FRAMEBUFFER_BINDING_ANGLE:
       case GL_RENDERBUFFER_BINDING:
       case GL_CURRENT_PROGRAM:
       case GL_PACK_ALIGNMENT:
@@ -1620,15 +1114,14 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
       case GL_TEXTURE_BINDING_CUBE_MAP:
       case GL_RESET_NOTIFICATION_STRATEGY_EXT:
       case GL_NUM_PROGRAM_BINARY_FORMATS_OES:
-      case GL_PROGRAM_BINARY_FORMATS_OES:
         {
             *type = GL_INT;
             *numParams = 1;
         }
-        break;
+        return true;
       case GL_MAX_SAMPLES_ANGLE:
         {
-            if (getMaxSupportedSamples() != 0)
+            if (mExtensions.framebufferMultisample)
             {
                 *type = GL_INT;
                 *numParams = 1;
@@ -1638,20 +1131,34 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
                 return false;
             }
         }
-        break;
+        return true;
+      case GL_PIXEL_PACK_BUFFER_BINDING:
+      case GL_PIXEL_UNPACK_BUFFER_BINDING:
+        {
+            if (mExtensions.pixelBufferObject)
+            {
+                *type = GL_INT;
+                *numParams = 1;
+            }
+            else
+            {
+                return false;
+            }
+        }
+        return true;
       case GL_MAX_VIEWPORT_DIMS:
         {
             *type = GL_INT;
             *numParams = 2;
         }
-        break;
+        return true;
       case GL_VIEWPORT:
       case GL_SCISSOR_BOX:
         {
             *type = GL_INT;
             *numParams = 4;
         }
-        break;
+        return true;
       case GL_SHADER_COMPILER:
       case GL_SAMPLE_COVERAGE_INVERT:
       case GL_DEPTH_WRITEMASK:
@@ -1669,13 +1176,13 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
             *type = GL_BOOL;
             *numParams = 1;
         }
-        break;
+        return true;
       case GL_COLOR_WRITEMASK:
         {
             *type = GL_BOOL;
             *numParams = 4;
         }
-        break;
+        return true;
       case GL_POLYGON_OFFSET_FACTOR:
       case GL_POLYGON_OFFSET_UNITS:
       case GL_SAMPLE_COVERAGE_VALUE:
@@ -1685,7 +1192,7 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
             *type = GL_FLOAT;
             *numParams = 1;
         }
-        break;
+        return true;
       case GL_ALIASED_LINE_WIDTH_RANGE:
       case GL_ALIASED_POINT_SIZE_RANGE:
       case GL_DEPTH_RANGE:
@@ -1693,76 +1200,169 @@ bool Context::getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *nu
             *type = GL_FLOAT;
             *numParams = 2;
         }
-        break;
+        return true;
       case GL_COLOR_CLEAR_VALUE:
       case GL_BLEND_COLOR:
         {
             *type = GL_FLOAT;
             *numParams = 4;
         }
-        break;
+        return true;
       case GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT:
-        if (!supportsTextureFilterAnisotropy())
+        if (!mExtensions.maxTextureAnisotropy)
         {
             return false;
         }
         *type = GL_FLOAT;
         *numParams = 1;
-        break;
-      default:
+        return true;
+    }
+
+    if (mClientVersion < 3)
+    {
         return false;
     }
 
-    return true;
+    // Check for ES3.0+ parameter names
+    switch (pname)
+    {
+      case GL_MAX_UNIFORM_BUFFER_BINDINGS:
+      case GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT:
+      case GL_UNIFORM_BUFFER_BINDING:
+      case GL_TRANSFORM_FEEDBACK_BINDING:
+      case GL_COPY_READ_BUFFER_BINDING:
+      case GL_COPY_WRITE_BUFFER_BINDING:
+      case GL_TEXTURE_BINDING_3D:
+      case GL_TEXTURE_BINDING_2D_ARRAY:
+      case GL_MAX_3D_TEXTURE_SIZE:
+      case GL_MAX_ARRAY_TEXTURE_LAYERS:
+      case GL_MAX_VERTEX_UNIFORM_BLOCKS:
+      case GL_MAX_FRAGMENT_UNIFORM_BLOCKS:
+      case GL_MAX_COMBINED_UNIFORM_BLOCKS:
+      case GL_MAX_VARYING_COMPONENTS:
+      case GL_VERTEX_ARRAY_BINDING:
+      case GL_MAX_VERTEX_UNIFORM_COMPONENTS:
+      case GL_MAX_FRAGMENT_UNIFORM_COMPONENTS:
+      case GL_NUM_EXTENSIONS:
+      case GL_MAJOR_VERSION:
+      case GL_MINOR_VERSION:
+      case GL_MAX_ELEMENTS_INDICES:
+      case GL_MAX_ELEMENTS_VERTICES:
+      case GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS:
+      case GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS:
+      case GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS:
+        {
+            *type = GL_INT;
+            *numParams = 1;
+        }
+        return true;
+
+      case GL_MAX_ELEMENT_INDEX:
+      case GL_MAX_UNIFORM_BLOCK_SIZE:
+      case GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS:
+      case GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS:
+      case GL_MAX_SERVER_WAIT_TIMEOUT:
+        {
+            *type = GL_INT_64_ANGLEX;
+            *numParams = 1;
+        }
+        return true;
+
+      case GL_TRANSFORM_FEEDBACK_ACTIVE:
+      case GL_TRANSFORM_FEEDBACK_PAUSED:
+        {
+            *type = GL_BOOL;
+            *numParams = 1;
+        }
+        return true;
+    }
+
+    return false;
 }
 
-// Applies the render target surface, depth stencil surface, viewport rectangle and
-// scissor rectangle to the renderer
-bool Context::applyRenderTarget(GLenum drawMode, bool ignoreViewport)
+bool Context::getIndexedQueryParameterInfo(GLenum target, GLenum *type, unsigned int *numParams)
 {
-    Framebuffer *framebufferObject = getDrawFramebuffer();
+    if (mClientVersion < 3)
+    {
+        return false;
+    }
 
-    if (!framebufferObject || framebufferObject->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    switch (target)
     {
-        return gl::error(GL_INVALID_FRAMEBUFFER_OPERATION, false);
+      case GL_TRANSFORM_FEEDBACK_BUFFER_BINDING:
+      case GL_UNIFORM_BUFFER_BINDING:
+        {
+            *type = GL_INT;
+            *numParams = 1;
+        }
+        return true;
+      case GL_TRANSFORM_FEEDBACK_BUFFER_START:
+      case GL_TRANSFORM_FEEDBACK_BUFFER_SIZE:
+      case GL_UNIFORM_BUFFER_START:
+      case GL_UNIFORM_BUFFER_SIZE:
+        {
+            *type = GL_INT_64_ANGLEX;
+            *numParams = 1;
+        }
     }
 
-    mRenderer->applyRenderTarget(framebufferObject);
+    return false;
+}
 
-    if (!mRenderer->setViewport(mState.viewport, mState.zNear, mState.zFar, drawMode, mState.rasterizer.frontFace,
-                                ignoreViewport))
+// Applies the render target surface, depth stencil surface, viewport rectangle and
+// scissor rectangle to the renderer
+Error Context::applyRenderTarget(GLenum drawMode, bool ignoreViewport)
+{
+    Framebuffer *framebufferObject = mState.getDrawFramebuffer();
+    ASSERT(framebufferObject && framebufferObject->completeness() == GL_FRAMEBUFFER_COMPLETE);
+
+    gl::Error error = mRenderer->applyRenderTarget(framebufferObject);
+    if (error.isError())
     {
-        return false;
+        return error;
     }
 
-    mRenderer->setScissorRectangle(mState.scissor, mState.scissorTest);
+    float nearZ, farZ;
+    mState.getDepthRange(&nearZ, &farZ);
+    mRenderer->setViewport(mState.getViewport(), nearZ, farZ, drawMode, mState.getRasterizerState().frontFace,
+                           ignoreViewport);
 
-    return true;
+    mRenderer->setScissorRectangle(mState.getScissor(), mState.isScissorTestEnabled());
+
+    return gl::Error(GL_NO_ERROR);
 }
 
 // Applies the fixed-function state (culling, depth test, alpha blending, stenciling, etc) to the Direct3D 9 device
-void Context::applyState(GLenum drawMode)
+Error Context::applyState(GLenum drawMode)
 {
-    Framebuffer *framebufferObject = getDrawFramebuffer();
+    Framebuffer *framebufferObject = mState.getDrawFramebuffer();
     int samples = framebufferObject->getSamples();
 
-    mState.rasterizer.pointDrawMode = (drawMode == GL_POINTS);
-    mState.rasterizer.multiSample = (samples != 0);
-    mRenderer->setRasterizerState(mState.rasterizer);
+    RasterizerState rasterizer = mState.getRasterizerState();
+    rasterizer.pointDrawMode = (drawMode == GL_POINTS);
+    rasterizer.multiSample = (samples != 0);
+
+    Error error = mRenderer->setRasterizerState(rasterizer);
+    if (error.isError())
+    {
+        return error;
+    }
 
     unsigned int mask = 0;
-    if (mState.sampleCoverage)
+    if (mState.isSampleCoverageEnabled())
     {
-        if (mState.sampleCoverageValue != 0)
+        GLclampf coverageValue;
+        bool coverageInvert = false;
+        mState.getSampleCoverageParams(&coverageValue, &coverageInvert);
+        if (coverageValue != 0)
         {
-
             float threshold = 0.5f;
 
             for (int i = 0; i < samples; ++i)
             {
                 mask <<= 1;
 
-                if ((i + 1) * mState.sampleCoverageValue >= threshold)
+                if ((i + 1) * coverageValue >= threshold)
                 {
                     threshold += 1.0f;
                     mask |= 1;
@@ -1770,7 +1370,7 @@ void Context::applyState(GLenum drawMode)
             }
         }
 
-        if (mState.sampleCoverageInvert)
+        if (coverageInvert)
         {
             mask = ~mask;
         }
@@ -1779,279 +1379,524 @@ void Context::applyState(GLenum drawMode)
     {
         mask = 0xFFFFFFFF;
     }
-    mRenderer->setBlendState(framebufferObject, mState.blend, mState.blendColor, mask);
+    error = mRenderer->setBlendState(framebufferObject, mState.getBlendState(), mState.getBlendColor(), mask);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    error = mRenderer->setDepthStencilState(mState.getDepthStencilState(), mState.getStencilRef(), mState.getStencilBackRef(),
+                                            rasterizer.frontFace == GL_CCW);
+    if (error.isError())
+    {
+        return error;
+    }
 
-    mRenderer->setDepthStencilState(mState.depthStencil, mState.stencilRef, mState.stencilBackRef,
-                                    mState.rasterizer.frontFace == GL_CCW);
+    return Error(GL_NO_ERROR);
 }
 
 // Applies the shaders and shader constants to the Direct3D 9 device
-void Context::applyShaders()
+Error Context::applyShaders(ProgramBinary *programBinary, bool transformFeedbackActive)
 {
-    ProgramBinary *programBinary = getCurrentProgramBinary();
+    const VertexAttribute *vertexAttributes = mState.getVertexArray()->getVertexAttributes();
 
-    mRenderer->applyShaders(programBinary);
-    
-    programBinary->applyUniforms();
+    VertexFormat inputLayout[MAX_VERTEX_ATTRIBS];
+    VertexFormat::GetInputLayout(inputLayout, programBinary, vertexAttributes, mState.getVertexAttribCurrentValues());
+
+    const Framebuffer *fbo = mState.getDrawFramebuffer();
+
+    Error error = mRenderer->applyShaders(programBinary, inputLayout, fbo, mState.getRasterizerState().rasterizerDiscard, transformFeedbackActive);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    return programBinary->applyUniforms();
 }
 
-// Applies the textures and sampler states to the Direct3D 9 device
-void Context::applyTextures()
+Error Context::generateSwizzles(ProgramBinary *programBinary, SamplerType type)
 {
-    applyTextures(SAMPLER_PIXEL);
+    size_t samplerRange = programBinary->getUsedSamplerRange(type);
 
-    if (mSupportsVertexTexture)
+    for (size_t i = 0; i < samplerRange; i++)
     {
-        applyTextures(SAMPLER_VERTEX);
+        GLenum textureType = programBinary->getSamplerTextureType(type, i);
+        GLint textureUnit = programBinary->getSamplerMapping(type, i, getCaps());
+        if (textureUnit != -1)
+        {
+            Texture* texture = getSamplerTexture(textureUnit, textureType);
+            if (texture->getSamplerState().swizzleRequired())
+            {
+                Error error = mRenderer->generateSwizzle(texture);
+                if (error.isError())
+                {
+                    return error;
+                }
+            }
+        }
     }
+
+    return Error(GL_NO_ERROR);
 }
 
-// For each Direct3D 9 sampler of either the pixel or vertex stage,
-// looks up the corresponding OpenGL texture image unit and texture type,
-// and sets the texture and its addressing/filtering state (or NULL when inactive).
-void Context::applyTextures(SamplerType type)
+Error Context::generateSwizzles(ProgramBinary *programBinary)
 {
-    ProgramBinary *programBinary = getCurrentProgramBinary();
+    Error error = generateSwizzles(programBinary, SAMPLER_VERTEX);
+    if (error.isError())
+    {
+        return error;
+    }
 
-    FramebufferTextureSerialSet boundFramebufferTextures = getBoundFramebufferTextureSerials();
+    error = generateSwizzles(programBinary, SAMPLER_PIXEL);
+    if (error.isError())
+    {
+        return error;
+    }
 
-    // Range of Direct3D samplers of given sampler type
-    int samplerCount = (type == SAMPLER_PIXEL) ? MAX_TEXTURE_IMAGE_UNITS : mRenderer->getMaxVertexTextureImageUnits();
-    int samplerRange = programBinary->getUsedSamplerRange(type);
+    return Error(GL_NO_ERROR);
+}
 
-    for (int samplerIndex = 0; samplerIndex < samplerRange; samplerIndex++)
+// For each Direct3D sampler of either the pixel or vertex stage,
+// looks up the corresponding OpenGL texture image unit and texture type,
+// and sets the texture and its addressing/filtering state (or NULL when inactive).
+Error Context::applyTextures(ProgramBinary *programBinary, SamplerType shaderType,
+                             const FramebufferTextureSerialArray &framebufferSerials, size_t framebufferSerialCount)
+{
+    size_t samplerRange = programBinary->getUsedSamplerRange(shaderType);
+    for (size_t samplerIndex = 0; samplerIndex < samplerRange; samplerIndex++)
     {
-        int textureUnit = programBinary->getSamplerMapping(type, samplerIndex);   // OpenGL texture image unit index
-
+        GLenum textureType = programBinary->getSamplerTextureType(shaderType, samplerIndex);
+        GLint textureUnit = programBinary->getSamplerMapping(shaderType, samplerIndex, getCaps());
         if (textureUnit != -1)
         {
-            TextureType textureType = programBinary->getSamplerTextureType(type, samplerIndex);
-            Texture *texture = getSamplerTexture(textureUnit, textureType);
+            SamplerState sampler;
+            Texture* texture = getSamplerTexture(textureUnit, textureType);
+            texture->getSamplerStateWithNativeOffset(&sampler);
 
-            if (texture->isSamplerComplete() &&
-                boundFramebufferTextures.find(texture->getTextureSerial()) == boundFramebufferTextures.end())
+            Sampler *samplerObject = mState.getSampler(textureUnit);
+            if (samplerObject)
             {
-                SamplerState samplerState;
-                texture->getSamplerState(&samplerState);
-                mRenderer->setSamplerState(type, samplerIndex, samplerState);
+                samplerObject->getState(&sampler);
+            }
 
-                mRenderer->setTexture(type, samplerIndex, texture);
+            // TODO: std::binary_search may become unavailable using older versions of GCC
+            if (texture->isSamplerComplete(sampler, mTextureCaps, mExtensions, mClientVersion) &&
+                !std::binary_search(framebufferSerials.begin(), framebufferSerials.begin() + framebufferSerialCount, texture->getTextureSerial()))
+            {
+                Error error = mRenderer->setSamplerState(shaderType, samplerIndex, sampler);
+                if (error.isError())
+                {
+                    return error;
+                }
 
-                texture->resetDirty();
+                error = mRenderer->setTexture(shaderType, samplerIndex, texture);
+                if (error.isError())
+                {
+                    return error;
+                }
             }
             else
             {
-                mRenderer->setTexture(type, samplerIndex, getIncompleteTexture(textureType));
+                // Texture is not sampler complete or it is in use by the framebuffer.  Bind the incomplete texture.
+                Texture *incompleteTexture = getIncompleteTexture(textureType);
+                gl::Error error = mRenderer->setTexture(shaderType, samplerIndex, incompleteTexture);
+                if (error.isError())
+                {
+                    return error;
+                }
             }
         }
         else
         {
-            mRenderer->setTexture(type, samplerIndex, NULL);
+            // No texture bound to this slot even though it is used by the shader, bind a NULL texture
+            Error error = mRenderer->setTexture(shaderType, samplerIndex, NULL);
+            if (error.isError())
+            {
+                return error;
+            }
         }
     }
 
-    for (int samplerIndex = samplerRange; samplerIndex < samplerCount; samplerIndex++)
+    // Set all the remaining textures to NULL
+    size_t samplerCount = (shaderType == SAMPLER_PIXEL) ? mCaps.maxTextureImageUnits
+                                                        : mCaps.maxVertexTextureImageUnits;
+    for (size_t samplerIndex = samplerRange; samplerIndex < samplerCount; samplerIndex++)
     {
-        mRenderer->setTexture(type, samplerIndex, NULL);
+        Error error = mRenderer->setTexture(shaderType, samplerIndex, NULL);
+        if (error.isError())
+        {
+            return error;
+        }
     }
+
+    return Error(GL_NO_ERROR);
 }
 
-void Context::readPixels(GLint x, GLint y, GLsizei width, GLsizei height,
-                         GLenum format, GLenum type, GLsizei *bufSize, void* pixels)
+Error Context::applyTextures(ProgramBinary *programBinary)
 {
-    Framebuffer *framebuffer = getReadFramebuffer();
+    FramebufferTextureSerialArray framebufferSerials;
+    size_t framebufferSerialCount = getBoundFramebufferTextureSerials(&framebufferSerials);
 
-    if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    Error error = applyTextures(programBinary, SAMPLER_VERTEX, framebufferSerials, framebufferSerialCount);
+    if (error.isError())
     {
-        return gl::error(GL_INVALID_FRAMEBUFFER_OPERATION);
+        return error;
     }
 
-    if (getReadFramebufferHandle() != 0 && framebuffer->getSamples() != 0)
+    error = applyTextures(programBinary, SAMPLER_PIXEL, framebufferSerials, framebufferSerialCount);
+    if (error.isError())
     {
-        return gl::error(GL_INVALID_OPERATION);
+        return error;
     }
 
-    GLsizei outputPitch = ComputePitch(width, ConvertSizedInternalFormat(format, type), getPackAlignment());
-    // sized query sanity check
-    if (bufSize)
+    return Error(GL_NO_ERROR);
+}
+
+Error Context::applyUniformBuffers()
+{
+    Program *programObject = getProgram(mState.getCurrentProgramId());
+    ProgramBinary *programBinary = programObject->getProgramBinary();
+
+    std::vector<Buffer*> boundBuffers;
+
+    for (unsigned int uniformBlockIndex = 0; uniformBlockIndex < programBinary->getActiveUniformBlockCount(); uniformBlockIndex++)
     {
-        int requiredSize = outputPitch * height;
-        if (requiredSize > *bufSize)
+        GLuint blockBinding = programObject->getUniformBlockBinding(uniformBlockIndex);
+
+        if (mState.getIndexedUniformBuffer(blockBinding)->id() == 0)
+        {
+            // undefined behaviour
+            return gl::Error(GL_INVALID_OPERATION, "It is undefined behaviour to have a used but unbound uniform buffer.");
+        }
+        else
         {
-            return gl::error(GL_INVALID_OPERATION);
+            Buffer *uniformBuffer = mState.getIndexedUniformBuffer(blockBinding);
+            ASSERT(uniformBuffer);
+            boundBuffers.push_back(uniformBuffer);
         }
     }
 
-    mRenderer->readPixels(framebuffer, x, y, width, height, format, type, outputPitch, getPackReverseRowOrder(), getPackAlignment(), pixels);
+    return programBinary->applyUniformBuffers(boundBuffers, getCaps());
 }
 
-void Context::clear(GLbitfield mask)
+bool Context::applyTransformFeedbackBuffers()
 {
-    Framebuffer *framebufferObject = getDrawFramebuffer();
+    TransformFeedback *curTransformFeedback = mState.getCurrentTransformFeedback();
+    if (curTransformFeedback && curTransformFeedback->isStarted() && !curTransformFeedback->isPaused())
+    {
+        Buffer *transformFeedbackBuffers[IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+        GLintptr transformFeedbackOffsets[IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+        for (size_t i = 0; i < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
+        {
+            transformFeedbackBuffers[i] = mState.getIndexedTransformFeedbackBuffer(i);
+            transformFeedbackOffsets[i] = mState.getIndexedTransformFeedbackBufferOffset(i);
+        }
+        mRenderer->applyTransformFeedbackBuffers(transformFeedbackBuffers, transformFeedbackOffsets);
+        return true;
+    }
+    else
+    {
+        return false;
+    }
+}
 
-    if (!framebufferObject || framebufferObject->completeness() != GL_FRAMEBUFFER_COMPLETE)
+void Context::markTransformFeedbackUsage()
+{
+    for (size_t i = 0; i < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
     {
-        return gl::error(GL_INVALID_FRAMEBUFFER_OPERATION);
+        Buffer *buffer = mState.getIndexedTransformFeedbackBuffer(i);
+        if (buffer)
+        {
+            buffer->markTransformFeedbackUsage();
+        }
     }
+}
 
-    DWORD flags = 0;
-    GLbitfield finalMask = 0;
+Error Context::clear(GLbitfield mask)
+{
+    if (mState.isRasterizerDiscardEnabled())
+    {
+        return Error(GL_NO_ERROR);
+    }
+
+    ClearParameters clearParams = mState.getClearParameters(mask);
+
+    applyRenderTarget(GL_TRIANGLES, true);   // Clips the clear to the scissor rectangle but not the viewport
+
+    return mRenderer->clear(clearParams, mState.getDrawFramebuffer());
+}
 
-    if (mask & GL_COLOR_BUFFER_BIT)
+Error Context::clearBufferfv(GLenum buffer, int drawbuffer, const float *values)
+{
+    if (mState.isRasterizerDiscardEnabled())
     {
-        mask &= ~GL_COLOR_BUFFER_BIT;
+        return Error(GL_NO_ERROR);
+    }
+
+    // glClearBufferfv can be called to clear the color buffer or depth buffer
+    ClearParameters clearParams = mState.getClearParameters(0);
 
-        if (framebufferObject->hasEnabledColorAttachment())
+    if (buffer == GL_COLOR)
+    {
+        for (unsigned int i = 0; i < ArraySize(clearParams.clearColor); i++)
         {
-            finalMask |= GL_COLOR_BUFFER_BIT;
+            clearParams.clearColor[i] = (drawbuffer == static_cast<int>(i));
         }
+        clearParams.colorFClearValue = ColorF(values[0], values[1], values[2], values[3]);
+        clearParams.colorClearType = GL_FLOAT;
     }
 
-    if (mask & GL_DEPTH_BUFFER_BIT)
+    if (buffer == GL_DEPTH)
     {
-        mask &= ~GL_DEPTH_BUFFER_BIT;
-        if (mState.depthStencil.depthMask && framebufferObject->getDepthbufferType() != GL_NONE)
-        {
-            finalMask |= GL_DEPTH_BUFFER_BIT;
-        }
+        clearParams.clearDepth = true;
+        clearParams.depthClearValue = values[0];
     }
 
-    if (mask & GL_STENCIL_BUFFER_BIT)
+    applyRenderTarget(GL_TRIANGLES, true);   // Clips the clear to the scissor rectangle but not the viewport
+
+    return mRenderer->clear(clearParams, mState.getDrawFramebuffer());
+}
+
+Error Context::clearBufferuiv(GLenum buffer, int drawbuffer, const unsigned int *values)
+{
+    if (mState.isRasterizerDiscardEnabled())
     {
-        mask &= ~GL_STENCIL_BUFFER_BIT;
-        if (framebufferObject->getStencilbufferType() != GL_NONE)
-        {
-            rx::RenderTarget *depthStencil = framebufferObject->getStencilbuffer()->getDepthStencil();
-            if (!depthStencil)
-            {
-                ERR("Depth stencil pointer unexpectedly null.");
-                return;
-            }
+        return Error(GL_NO_ERROR);
+    }
 
-            if (GetStencilSize(depthStencil->getActualFormat()) > 0)
-            {
-                finalMask |= GL_STENCIL_BUFFER_BIT;
-            }
+    // glClearBufferuv can only be called to clear a color buffer
+    ClearParameters clearParams = mState.getClearParameters(0);
+    for (unsigned int i = 0; i < ArraySize(clearParams.clearColor); i++)
+    {
+        clearParams.clearColor[i] = (drawbuffer == static_cast<int>(i));
+    }
+    clearParams.colorUIClearValue = ColorUI(values[0], values[1], values[2], values[3]);
+    clearParams.colorClearType = GL_UNSIGNED_INT;
+
+    applyRenderTarget(GL_TRIANGLES, true);   // Clips the clear to the scissor rectangle but not the viewport
+
+    return mRenderer->clear(clearParams, mState.getDrawFramebuffer());
+}
+
+Error Context::clearBufferiv(GLenum buffer, int drawbuffer, const int *values)
+{
+    if (mState.isRasterizerDiscardEnabled())
+    {
+        return Error(GL_NO_ERROR);
+    }
+
+    // glClearBufferfv can be called to clear the color buffer or stencil buffer
+    ClearParameters clearParams = mState.getClearParameters(0);
+
+    if (buffer == GL_COLOR)
+    {
+        for (unsigned int i = 0; i < ArraySize(clearParams.clearColor); i++)
+        {
+            clearParams.clearColor[i] = (drawbuffer == static_cast<int>(i));
         }
+        clearParams.colorIClearValue = ColorI(values[0], values[1], values[2], values[3]);
+        clearParams.colorClearType = GL_INT;
     }
 
-    if (mask != 0)
+    if (buffer == GL_STENCIL)
     {
-        return gl::error(GL_INVALID_VALUE);
+        clearParams.clearStencil = true;
+        clearParams.stencilClearValue = values[1];
     }
 
-    if (!applyRenderTarget(GL_TRIANGLES, true))   // Clips the clear to the scissor rectangle but not the viewport
+    applyRenderTarget(GL_TRIANGLES, true);   // Clips the clear to the scissor rectangle but not the viewport
+
+    return mRenderer->clear(clearParams, mState.getDrawFramebuffer());
+}
+
+Error Context::clearBufferfi(GLenum buffer, int drawbuffer, float depth, int stencil)
+{
+    if (mState.isRasterizerDiscardEnabled())
     {
-        return;
+        return Error(GL_NO_ERROR);
     }
 
-    ClearParameters clearParams;
-    clearParams.mask = finalMask;
-    clearParams.colorClearValue = mState.colorClearValue;
-    clearParams.colorMaskRed = mState.blend.colorMaskRed;
-    clearParams.colorMaskGreen = mState.blend.colorMaskGreen;
-    clearParams.colorMaskBlue = mState.blend.colorMaskBlue;
-    clearParams.colorMaskAlpha = mState.blend.colorMaskAlpha;
-    clearParams.depthClearValue = mState.depthClearValue;
-    clearParams.stencilClearValue = mState.stencilClearValue;
-    clearParams.stencilWriteMask = mState.depthStencil.stencilWritemask;
+    // glClearBufferfi can only be called to clear a depth stencil buffer
+    ClearParameters clearParams = mState.getClearParameters(0);
+    clearParams.clearDepth = true;
+    clearParams.depthClearValue = depth;
+    clearParams.clearStencil = true;
+    clearParams.stencilClearValue = stencil;
+
+    applyRenderTarget(GL_TRIANGLES, true);   // Clips the clear to the scissor rectangle but not the viewport
 
-    mRenderer->clear(clearParams, framebufferObject);
+    return mRenderer->clear(clearParams, mState.getDrawFramebuffer());
 }
 
-void Context::drawArrays(GLenum mode, GLint first, GLsizei count, GLsizei instances)
+Error Context::readPixels(GLint x, GLint y, GLsizei width, GLsizei height,
+                          GLenum format, GLenum type, GLsizei *bufSize, void* pixels)
 {
-    if (!mState.currentProgram)
+    Framebuffer *framebuffer = mState.getReadFramebuffer();
+
+    GLenum sizedInternalFormat = GetSizedInternalFormat(format, type);
+    const InternalFormat &sizedFormatInfo = GetInternalFormatInfo(sizedInternalFormat);
+    GLuint outputPitch = sizedFormatInfo.computeRowPitch(type, width, mState.getPackAlignment());
+
+    return mRenderer->readPixels(framebuffer, x, y, width, height, format, type, outputPitch, mState.getPackState(),
+                                 reinterpret_cast<uint8_t*>(pixels));
+}
+
+Error Context::drawArrays(GLenum mode, GLint first, GLsizei count, GLsizei instances)
+{
+    ASSERT(mState.getCurrentProgramId() != 0);
+
+    ProgramBinary *programBinary = mState.getCurrentProgramBinary();
+    programBinary->updateSamplerMapping();
+
+    Error error = generateSwizzles(programBinary);
+    if (error.isError())
     {
-        return gl::error(GL_INVALID_OPERATION);
+        return error;
     }
 
     if (!mRenderer->applyPrimitiveType(mode, count))
     {
-        return;
+        return Error(GL_NO_ERROR);
+    }
+
+    error = applyRenderTarget(mode, false);
+    if (error.isError())
+    {
+        return error;
     }
 
-    if (!applyRenderTarget(mode, false))
+    error = applyState(mode);
+    if (error.isError())
     {
-        return;
+        return error;
     }
 
-    applyState(mode);
+    error = mRenderer->applyVertexBuffer(programBinary, mState.getVertexArray()->getVertexAttributes(), mState.getVertexAttribCurrentValues(), first, count, instances);
+    if (error.isError())
+    {
+        return error;
+    }
 
-    ProgramBinary *programBinary = getCurrentProgramBinary();
+    bool transformFeedbackActive = applyTransformFeedbackBuffers();
 
-    GLenum err = mRenderer->applyVertexBuffer(programBinary, mState.vertexAttribute, first, count, instances);
-    if (err != GL_NO_ERROR)
+    error = applyShaders(programBinary, transformFeedbackActive);
+    if (error.isError())
     {
-        return gl::error(err);
+        return error;
     }
 
-    applyShaders();
-    applyTextures();
+    error = applyTextures(programBinary);
+    if (error.isError())
+    {
+        return error;
+    }
 
-    if (!programBinary->validateSamplers(NULL))
+    error = applyUniformBuffers();
+    if (error.isError())
     {
-        return gl::error(GL_INVALID_OPERATION);
+        return error;
     }
 
     if (!skipDraw(mode))
     {
-        mRenderer->drawArrays(mode, count, instances);
+        error = mRenderer->drawArrays(mode, count, instances, transformFeedbackActive);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        if (transformFeedbackActive)
+        {
+            markTransformFeedbackUsage();
+        }
     }
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Context::drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei instances)
+Error Context::drawElements(GLenum mode, GLsizei count, GLenum type,
+                            const GLvoid *indices, GLsizei instances,
+                            const rx::RangeUI &indexRange)
 {
-    if (!mState.currentProgram)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
+    ASSERT(mState.getCurrentProgramId() != 0);
+
+    ProgramBinary *programBinary = mState.getCurrentProgramBinary();
+    programBinary->updateSamplerMapping();
 
-    if (!indices && !mState.elementArrayBuffer)
+    Error error = generateSwizzles(programBinary);
+    if (error.isError())
     {
-        return gl::error(GL_INVALID_OPERATION);
+        return error;
     }
-    
+
     if (!mRenderer->applyPrimitiveType(mode, count))
     {
-        return;
+        return Error(GL_NO_ERROR);
     }
 
-    if (!applyRenderTarget(mode, false))
+    error = applyRenderTarget(mode, false);
+    if (error.isError())
     {
-        return;
+        return error;
     }
 
-    applyState(mode);
+    error = applyState(mode);
+    if (error.isError())
+    {
+        return error;
+    }
 
+    VertexArray *vao = mState.getVertexArray();
     rx::TranslatedIndexData indexInfo;
-    GLenum err = mRenderer->applyIndexBuffer(indices, mState.elementArrayBuffer.get(), count, mode, type, &indexInfo);
-    if (err != GL_NO_ERROR)
+    indexInfo.indexRange = indexRange;
+    error = mRenderer->applyIndexBuffer(indices, vao->getElementArrayBuffer(), count, mode, type, &indexInfo);
+    if (error.isError())
     {
-        return gl::error(err);
+        return error;
     }
 
-    ProgramBinary *programBinary = getCurrentProgramBinary();
+    GLsizei vertexCount = indexInfo.indexRange.length() + 1;
+    error = mRenderer->applyVertexBuffer(programBinary, vao->getVertexAttributes(),
+                                         mState.getVertexAttribCurrentValues(),
+                                         indexInfo.indexRange.start, vertexCount, instances);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    bool transformFeedbackActive = applyTransformFeedbackBuffers();
+    // Transform feedback is not allowed for DrawElements, this error should have been caught at the API validation
+    // layer.
+    ASSERT(!transformFeedbackActive);
 
-    GLsizei vertexCount = indexInfo.maxIndex - indexInfo.minIndex + 1;
-    err = mRenderer->applyVertexBuffer(programBinary, mState.vertexAttribute, indexInfo.minIndex, vertexCount, instances);
-    if (err != GL_NO_ERROR)
+    error = applyShaders(programBinary, transformFeedbackActive);
+    if (error.isError())
     {
-        return gl::error(err);
+        return error;
     }
 
-    applyShaders();
-    applyTextures();
+    error = applyTextures(programBinary);
+    if (error.isError())
+    {
+        return error;
+    }
 
-    if (!programBinary->validateSamplers(NULL))
+    error = applyUniformBuffers();
+    if (error.isError())
     {
-        return gl::error(GL_INVALID_OPERATION);
+        return error;
     }
 
     if (!skipDraw(mode))
     {
-        mRenderer->drawElements(mode, count, type, indices, mState.elementArrayBuffer.get(), indexInfo, instances);
+        error = mRenderer->drawElements(mode, count, type, indices, vao->getElementArrayBuffer(), indexInfo, instances);
+        if (error.isError())
+        {
+            return error;
+        }
     }
+
+    return Error(GL_NO_ERROR);
 }
 
 // Implements glFlush when block is false, glFinish when block is true
@@ -2060,71 +1905,28 @@ void Context::sync(bool block)
     mRenderer->sync(block);
 }
 
-void Context::recordInvalidEnum()
+void Context::recordError(const Error &error)
 {
-    mInvalidEnum = true;
-}
-
-void Context::recordInvalidValue()
-{
-    mInvalidValue = true;
-}
-
-void Context::recordInvalidOperation()
-{
-    mInvalidOperation = true;
-}
-
-void Context::recordOutOfMemory()
-{
-    mOutOfMemory = true;
-}
-
-void Context::recordInvalidFramebufferOperation()
-{
-    mInvalidFramebufferOperation = true;
+    if (error.isError())
+    {
+        mErrors.insert(error.getCode());
+    }
 }
 
 // Get one of the recorded errors and clear its flag, if any.
 // [OpenGL ES 2.0.24] section 2.5 page 13.
 GLenum Context::getError()
 {
-    if (mInvalidEnum)
-    {
-        mInvalidEnum = false;
-
-        return GL_INVALID_ENUM;
-    }
-
-    if (mInvalidValue)
+    if (mErrors.empty())
     {
-        mInvalidValue = false;
-
-        return GL_INVALID_VALUE;
+        return GL_NO_ERROR;
     }
-
-    if (mInvalidOperation)
-    {
-        mInvalidOperation = false;
-
-        return GL_INVALID_OPERATION;
-    }
-
-    if (mOutOfMemory)
-    {
-        mOutOfMemory = false;
-
-        return GL_OUT_OF_MEMORY;
-    }
-
-    if (mInvalidFramebufferOperation)
+    else
     {
-        mInvalidFramebufferOperation = false;
-
-        return GL_INVALID_FRAMEBUFFER_OPERATION;
+        GLenum error = *mErrors.begin();
+        mErrors.erase(mErrors.begin());
+        return error;
     }
-
-    return GL_NO_ERROR;
 }
 
 GLenum Context::getResetStatus()
@@ -2147,7 +1949,7 @@ GLenum Context::getResetStatus()
             mResetStatus = GL_NO_ERROR;
         }
     }
-    
+
     return status;
 }
 
@@ -2156,244 +1958,85 @@ bool Context::isResetNotificationEnabled()
     return (mResetStrategy == GL_LOSE_CONTEXT_ON_RESET_EXT);
 }
 
-int Context::getMajorShaderModel() const
-{
-    return mMajorShaderModel;
-}
-
-float Context::getMaximumPointSize() const
-{
-    return mMaximumPointSize;
-}
-
-unsigned int Context::getMaximumCombinedTextureImageUnits() const
-{
-    return mRenderer->getMaxCombinedTextureImageUnits();
-}
-
-int Context::getMaxSupportedSamples() const
-{
-    return mRenderer->getMaxSupportedSamples();
-}
-
-unsigned int Context::getMaximumRenderTargets() const
-{
-    return mRenderer->getMaxRenderTargets();
-}
-
-bool Context::supportsEventQueries() const
-{
-    return mSupportsEventQueries;
-}
-
-bool Context::supportsOcclusionQueries() const
+int Context::getClientVersion() const
 {
-    return mSupportsOcclusionQueries;
+    return mClientVersion;
 }
 
-bool Context::supportsBGRATextures() const
+const Caps &Context::getCaps() const
 {
-    return mSupportsBGRATextures;
+    return mCaps;
 }
 
-bool Context::supportsDXT1Textures() const
+const TextureCapsMap &Context::getTextureCaps() const
 {
-    return mSupportsDXT1Textures;
+    return mTextureCaps;
 }
 
-bool Context::supportsDXT3Textures() const
+const Extensions &Context::getExtensions() const
 {
-    return mSupportsDXT3Textures;
+    return mExtensions;
 }
 
-bool Context::supportsDXT5Textures() const
+void Context::getCurrentReadFormatType(GLenum *internalFormat, GLenum *format, GLenum *type)
 {
-    return mSupportsDXT5Textures;
-}
-
-bool Context::supportsFloat32Textures() const
-{
-    return mSupportsFloat32Textures;
-}
-
-bool Context::supportsFloat32LinearFilter() const
-{
-    return mSupportsFloat32LinearFilter;
-}
-
-bool Context::supportsFloat32RenderableTextures() const
-{
-    return mSupportsFloat32RenderableTextures;
-}
-
-bool Context::supportsFloat16Textures() const
-{
-    return mSupportsFloat16Textures;
-}
-
-bool Context::supportsFloat16LinearFilter() const
-{
-    return mSupportsFloat16LinearFilter;
-}
-
-bool Context::supportsFloat16RenderableTextures() const
-{
-    return mSupportsFloat16RenderableTextures;
-}
+    Framebuffer *framebuffer = mState.getReadFramebuffer();
+    ASSERT(framebuffer && framebuffer->completeness() == GL_FRAMEBUFFER_COMPLETE);
 
-int Context::getMaximumRenderbufferDimension() const
-{
-    return mMaxRenderbufferDimension;
-}
+    FramebufferAttachment *attachment = framebuffer->getReadColorbuffer();
+    ASSERT(attachment);
 
-int Context::getMaximumTextureDimension() const
-{
-    return mMaxTextureDimension;
-}
+    GLenum actualFormat = attachment->getActualFormat();
+    const InternalFormat &actualFormatInfo = GetInternalFormatInfo(actualFormat);
 
-int Context::getMaximumCubeTextureDimension() const
-{
-    return mMaxCubeTextureDimension;
+    *internalFormat = actualFormat;
+    *format = actualFormatInfo.format;
+    *type = actualFormatInfo.type;
 }
 
-int Context::getMaximumTextureLevel() const
-{
-    return mMaxTextureLevel;
-}
-
-bool Context::supportsLuminanceTextures() const
-{
-    return mSupportsLuminanceTextures;
-}
-
-bool Context::supportsLuminanceAlphaTextures() const
-{
-    return mSupportsLuminanceAlphaTextures;
-}
-
-bool Context::supportsDepthTextures() const
-{
-    return mSupportsDepthTextures;
-}
-
-bool Context::supports32bitIndices() const
-{
-    return mSupports32bitIndices;
-}
-
-bool Context::supportsNonPower2Texture() const
-{
-    return mSupportsNonPower2Texture;
-}
-
-bool Context::supportsInstancing() const
-{
-    return mSupportsInstancing;
-}
-
-bool Context::supportsTextureFilterAnisotropy() const
-{
-    return mSupportsTextureFilterAnisotropy;
-}
-
-float Context::getTextureMaxAnisotropy() const
-{
-    return mMaxTextureAnisotropy;
-}
-
-bool Context::getCurrentReadFormatType(GLenum *format, GLenum *type)
+void Context::detachTexture(GLuint texture)
 {
-    Framebuffer *framebuffer = getReadFramebuffer();
-    if (!framebuffer || framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
-    {
-        return gl::error(GL_INVALID_OPERATION, false);
-    }
-
-    Renderbuffer *renderbuffer = framebuffer->getReadColorbuffer();
-    if (!renderbuffer)
-    {
-        return gl::error(GL_INVALID_OPERATION, false);
-    }
-
-    *format = gl::ExtractFormat(renderbuffer->getActualFormat()); 
-    *type = gl::ExtractType(renderbuffer->getActualFormat());
-
-    return true;
+    // Simple pass-through to State's detachTexture method, as textures do not require
+    // allocation map management either here or in the resource manager at detach time.
+    // Zero textures are held by the Context, and we don't attempt to request them from
+    // the State.
+    mState.detachTexture(texture);
 }
 
 void Context::detachBuffer(GLuint buffer)
 {
+    // Buffer detachment is handled by Context, because the buffer must also be 
+    // attached from any VAOs in existence, and Context holds the VAO map.
+
     // [OpenGL ES 2.0.24] section 2.9 page 22:
     // If a buffer object is deleted while it is bound, all bindings to that object in the current context
     // (i.e. in the thread that called Delete-Buffers) are reset to zero.
 
-    if (mState.arrayBuffer.id() == buffer)
-    {
-        mState.arrayBuffer.set(NULL);
-    }
-
-    if (mState.elementArrayBuffer.id() == buffer)
-    {
-        mState.elementArrayBuffer.set(NULL);
-    }
+    mState.removeArrayBufferBinding(buffer);
 
-    for (int attribute = 0; attribute < MAX_VERTEX_ATTRIBS; attribute++)
+    // mark as freed among the vertex array objects
+    for (auto vaoIt = mVertexArrayMap.begin(); vaoIt != mVertexArrayMap.end(); vaoIt++)
     {
-        if (mState.vertexAttribute[attribute].mBoundBuffer.id() == buffer)
-        {
-            mState.vertexAttribute[attribute].mBoundBuffer.set(NULL);
-        }
-    }
-}
-
-void Context::detachTexture(GLuint texture)
-{
-    // [OpenGL ES 2.0.24] section 3.8 page 84:
-    // If a texture object is deleted, it is as if all texture units which are bound to that texture object are
-    // rebound to texture object zero
-
-    for (int type = 0; type < TEXTURE_TYPE_COUNT; type++)
-    {
-        for (int sampler = 0; sampler < IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS; sampler++)
-        {
-            if (mState.samplerTexture[type][sampler].id() == texture)
-            {
-                mState.samplerTexture[type][sampler].set(NULL);
-            }
-        }
-    }
-
-    // [OpenGL ES 2.0.24] section 4.4 page 112:
-    // If a texture object is deleted while its image is attached to the currently bound framebuffer, then it is
-    // as if FramebufferTexture2D had been called, with a texture of 0, for each attachment point to which this
-    // image was attached in the currently bound framebuffer.
-
-    Framebuffer *readFramebuffer = getReadFramebuffer();
-    Framebuffer *drawFramebuffer = getDrawFramebuffer();
-
-    if (readFramebuffer)
-    {
-        readFramebuffer->detachTexture(texture);
-    }
-
-    if (drawFramebuffer && drawFramebuffer != readFramebuffer)
-    {
-        drawFramebuffer->detachTexture(texture);
+        vaoIt->second->detachBuffer(buffer);
     }
 }
 
 void Context::detachFramebuffer(GLuint framebuffer)
 {
+    // Framebuffer detachment is handled by Context, because 0 is a valid
+    // Framebuffer object, and a pointer to it must be passed from Context
+    // to State at binding time.
+
     // [OpenGL ES 2.0.24] section 4.4 page 107:
     // If a framebuffer that is currently bound to the target FRAMEBUFFER is deleted, it is as though
     // BindFramebuffer had been executed with the target of FRAMEBUFFER and framebuffer of zero.
 
-    if (mState.readFramebuffer == framebuffer)
+    if (mState.removeReadFramebufferBinding(framebuffer))
     {
         bindReadFramebuffer(0);
     }
 
-    if (mState.drawFramebuffer == framebuffer)
+    if (mState.removeDrawFramebufferBinding(framebuffer))
     {
         bindDrawFramebuffer(0);
     }
@@ -2401,76 +2044,94 @@ void Context::detachFramebuffer(GLuint framebuffer)
 
 void Context::detachRenderbuffer(GLuint renderbuffer)
 {
-    // [OpenGL ES 2.0.24] section 4.4 page 109:
-    // If a renderbuffer that is currently bound to RENDERBUFFER is deleted, it is as though BindRenderbuffer
-    // had been executed with the target RENDERBUFFER and name of zero.
-
-    if (mState.renderbuffer.id() == renderbuffer)
-    {
-        bindRenderbuffer(0);
-    }
-
-    // [OpenGL ES 2.0.24] section 4.4 page 111:
-    // If a renderbuffer object is deleted while its image is attached to the currently bound framebuffer,
-    // then it is as if FramebufferRenderbuffer had been called, with a renderbuffer of 0, for each attachment
-    // point to which this image was attached in the currently bound framebuffer.
+    mState.detachRenderbuffer(renderbuffer);
+}
 
-    Framebuffer *readFramebuffer = getReadFramebuffer();
-    Framebuffer *drawFramebuffer = getDrawFramebuffer();
+void Context::detachVertexArray(GLuint vertexArray)
+{
+    // Vertex array detachment is handled by Context, because 0 is a valid 
+    // VAO, and a pointer to it must be passed from Context to State at 
+    // binding time.
 
-    if (readFramebuffer)
+    // [OpenGL ES 3.0.2] section 2.10 page 43:
+    // If a vertex array object that is currently bound is deleted, the binding
+    // for that object reverts to zero and the default vertex array becomes current.
+    if (mState.removeVertexArrayBinding(vertexArray))
     {
-        readFramebuffer->detachRenderbuffer(renderbuffer);
+        bindVertexArray(0);
     }
+}
 
-    if (drawFramebuffer && drawFramebuffer != readFramebuffer)
-    {
-        drawFramebuffer->detachRenderbuffer(renderbuffer);
-    }
+void Context::detachTransformFeedback(GLuint transformFeedback)
+{
+    mState.detachTransformFeedback(transformFeedback);
 }
 
-Texture *Context::getIncompleteTexture(TextureType type)
+void Context::detachSampler(GLuint sampler)
 {
-    Texture *t = mIncompleteTextures[type].get();
+    mState.detachSampler(sampler);
+}
 
-    if (t == NULL)
+Texture *Context::getIncompleteTexture(GLenum type)
+{
+    if (mIncompleteTextures.find(type) == mIncompleteTextures.end())
     {
-        static const GLubyte color[] = { 0, 0, 0, 255 };
+        const GLubyte color[] = { 0, 0, 0, 255 };
+        const PixelUnpackState incompleteUnpackState(1);
 
+        Texture* t = NULL;
         switch (type)
         {
           default:
             UNREACHABLE();
             // default falls through to TEXTURE_2D
 
-          case TEXTURE_2D:
+          case GL_TEXTURE_2D:
             {
-                Texture2D *incomplete2d = new Texture2D(mRenderer, Texture::INCOMPLETE_TEXTURE_ID);
-                incomplete2d->setImage(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
+                Texture2D *incomplete2d = new Texture2D(mRenderer->createTexture(GL_TEXTURE_2D), Texture::INCOMPLETE_TEXTURE_ID);
+                incomplete2d->setImage(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
                 t = incomplete2d;
             }
             break;
 
-          case TEXTURE_CUBE:
+          case GL_TEXTURE_CUBE_MAP:
             {
-              TextureCubeMap *incompleteCube = new TextureCubeMap(mRenderer, Texture::INCOMPLETE_TEXTURE_ID);
+              TextureCubeMap *incompleteCube = new TextureCubeMap(mRenderer->createTexture(GL_TEXTURE_CUBE_MAP), Texture::INCOMPLETE_TEXTURE_ID);
 
-              incompleteCube->setImagePosX(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
-              incompleteCube->setImageNegX(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
-              incompleteCube->setImagePosY(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
-              incompleteCube->setImageNegY(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
-              incompleteCube->setImagePosZ(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
-              incompleteCube->setImageNegZ(0, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, 1, color);
+              incompleteCube->setImagePosX(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+              incompleteCube->setImageNegX(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+              incompleteCube->setImagePosY(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+              incompleteCube->setImageNegY(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+              incompleteCube->setImagePosZ(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+              incompleteCube->setImageNegZ(0, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
 
               t = incompleteCube;
             }
             break;
+
+          case GL_TEXTURE_3D:
+            {
+                Texture3D *incomplete3d = new Texture3D(mRenderer->createTexture(GL_TEXTURE_3D), Texture::INCOMPLETE_TEXTURE_ID);
+                incomplete3d->setImage(0, 1, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+
+                t = incomplete3d;
+            }
+            break;
+
+          case GL_TEXTURE_2D_ARRAY:
+            {
+                Texture2DArray *incomplete2darray = new Texture2DArray(mRenderer->createTexture(GL_TEXTURE_2D_ARRAY), Texture::INCOMPLETE_TEXTURE_ID);
+                incomplete2darray->setImage(0, 1, 1, 1, GL_RGBA, GL_RGBA, GL_UNSIGNED_BYTE, incompleteUnpackState, color);
+
+                t = incomplete2darray;
+            }
+            break;
         }
 
         mIncompleteTextures[type].set(t);
     }
 
-    return t;
+    return mIncompleteTextures[type].get();
 }
 
 bool Context::skipDraw(GLenum drawMode)
@@ -2480,9 +2141,9 @@ bool Context::skipDraw(GLenum drawMode)
         // ProgramBinary assumes non-point rendering if gl_PointSize isn't written,
         // which affects varying interpolation. Since the value of gl_PointSize is
         // undefined when not written, just skip drawing to avoid unexpected results.
-        if (!getCurrentProgramBinary()->usesPointSize())
+        if (!mState.getCurrentProgramBinary()->usesPointSize())
         {
-            // This is stictly speaking not an error, but developers should be 
+            // This is stictly speaking not an error, but developers should be
             // notified of risking undefined behavior.
             ERR("Point rendering without writing to gl_PointSize.");
 
@@ -2491,7 +2152,7 @@ bool Context::skipDraw(GLenum drawMode)
     }
     else if (IsTriangleMode(drawMode))
     {
-        if (mState.rasterizer.cullFace && mState.rasterizer.cullMode == GL_FRONT_AND_BACK)
+        if (mState.getRasterizerState().cullFace && mState.getRasterizerState().cullMode == GL_FRONT_AND_BACK)
         {
             return true;
         }
@@ -2500,148 +2161,97 @@ bool Context::skipDraw(GLenum drawMode)
     return false;
 }
 
-void Context::setVertexAttrib(GLuint index, const GLfloat *values)
-{
-    ASSERT(index < gl::MAX_VERTEX_ATTRIBS);
-
-    mState.vertexAttribute[index].mCurrentValue[0] = values[0];
-    mState.vertexAttribute[index].mCurrentValue[1] = values[1];
-    mState.vertexAttribute[index].mCurrentValue[2] = values[2];
-    mState.vertexAttribute[index].mCurrentValue[3] = values[3];
-}
-
 void Context::setVertexAttribDivisor(GLuint index, GLuint divisor)
 {
-    ASSERT(index < gl::MAX_VERTEX_ATTRIBS);
-
-    mState.vertexAttribute[index].mDivisor = divisor;
+    mState.getVertexArray()->setVertexAttribDivisor(index, divisor);
 }
 
-// keep list sorted in following order
-// OES extensions
-// EXT extensions
-// Vendor extensions
-void Context::initExtensionString()
+void Context::samplerParameteri(GLuint sampler, GLenum pname, GLint param)
 {
-    std::string extensionString = "";
+    mResourceManager->checkSamplerAllocation(sampler);
 
-    // OES extensions
-    if (supports32bitIndices())
-    {
-        extensionString += "GL_OES_element_index_uint ";
-    }
+    Sampler *samplerObject = getSampler(sampler);
+    ASSERT(samplerObject);
 
-    extensionString += "GL_OES_packed_depth_stencil ";
-    extensionString += "GL_OES_get_program_binary ";
-    extensionString += "GL_OES_rgb8_rgba8 ";
-    if (mRenderer->getDerivativeInstructionSupport())
-    {
-        extensionString += "GL_OES_standard_derivatives ";
-    }
-
-    if (supportsFloat16Textures())
-    {
-        extensionString += "GL_OES_texture_half_float ";
-    }
-    if (supportsFloat16LinearFilter())
-    {
-        extensionString += "GL_OES_texture_half_float_linear ";
-    }
-    if (supportsFloat32Textures())
-    {
-        extensionString += "GL_OES_texture_float ";
-    }
-    if (supportsFloat32LinearFilter())
-    {
-        extensionString += "GL_OES_texture_float_linear ";
-    }
-
-    if (supportsNonPower2Texture())
-    {
-        extensionString += "GL_OES_texture_npot ";
-    }
-
-    // Multi-vendor (EXT) extensions
-    if (supportsOcclusionQueries())
-    {
-        extensionString += "GL_EXT_occlusion_query_boolean ";
-    }
-
-    extensionString += "GL_EXT_read_format_bgra ";
-    extensionString += "GL_EXT_robustness ";
-
-    if (supportsDXT1Textures())
-    {
-        extensionString += "GL_EXT_texture_compression_dxt1 ";
-    }
-
-    if (supportsTextureFilterAnisotropy())
-    {
-        extensionString += "GL_EXT_texture_filter_anisotropic ";
-    }
-
-    if (supportsBGRATextures())
-    {
-        extensionString += "GL_EXT_texture_format_BGRA8888 ";
-    }
-
-    if (mRenderer->getMaxRenderTargets() > 1)
+    switch (pname)
     {
-        extensionString += "GL_EXT_draw_buffers ";
+      case GL_TEXTURE_MIN_FILTER:    samplerObject->setMinFilter(static_cast<GLenum>(param));       break;
+      case GL_TEXTURE_MAG_FILTER:    samplerObject->setMagFilter(static_cast<GLenum>(param));       break;
+      case GL_TEXTURE_WRAP_S:        samplerObject->setWrapS(static_cast<GLenum>(param));           break;
+      case GL_TEXTURE_WRAP_T:        samplerObject->setWrapT(static_cast<GLenum>(param));           break;
+      case GL_TEXTURE_WRAP_R:        samplerObject->setWrapR(static_cast<GLenum>(param));           break;
+      case GL_TEXTURE_MIN_LOD:       samplerObject->setMinLod(static_cast<GLfloat>(param));         break;
+      case GL_TEXTURE_MAX_LOD:       samplerObject->setMaxLod(static_cast<GLfloat>(param));         break;
+      case GL_TEXTURE_COMPARE_MODE:  samplerObject->setComparisonMode(static_cast<GLenum>(param));  break;
+      case GL_TEXTURE_COMPARE_FUNC:  samplerObject->setComparisonFunc(static_cast<GLenum>(param));  break;
+      default:                       UNREACHABLE(); break;
     }
+}
 
-    extensionString += "GL_EXT_texture_storage ";
-    extensionString += "GL_EXT_frag_depth ";
+void Context::samplerParameterf(GLuint sampler, GLenum pname, GLfloat param)
+{
+    mResourceManager->checkSamplerAllocation(sampler);
 
-    // ANGLE-specific extensions
-    if (supportsDepthTextures())
-    {
-        extensionString += "GL_ANGLE_depth_texture ";
-    }
+    Sampler *samplerObject = getSampler(sampler);
+    ASSERT(samplerObject);
 
-    extensionString += "GL_ANGLE_framebuffer_blit ";
-    if (getMaxSupportedSamples() != 0)
+    switch (pname)
     {
-        extensionString += "GL_ANGLE_framebuffer_multisample ";
+      case GL_TEXTURE_MIN_FILTER:    samplerObject->setMinFilter(uiround<GLenum>(param));       break;
+      case GL_TEXTURE_MAG_FILTER:    samplerObject->setMagFilter(uiround<GLenum>(param));       break;
+      case GL_TEXTURE_WRAP_S:        samplerObject->setWrapS(uiround<GLenum>(param));           break;
+      case GL_TEXTURE_WRAP_T:        samplerObject->setWrapT(uiround<GLenum>(param));           break;
+      case GL_TEXTURE_WRAP_R:        samplerObject->setWrapR(uiround<GLenum>(param));           break;
+      case GL_TEXTURE_MIN_LOD:       samplerObject->setMinLod(param);                           break;
+      case GL_TEXTURE_MAX_LOD:       samplerObject->setMaxLod(param);                           break;
+      case GL_TEXTURE_COMPARE_MODE:  samplerObject->setComparisonMode(uiround<GLenum>(param));  break;
+      case GL_TEXTURE_COMPARE_FUNC:  samplerObject->setComparisonFunc(uiround<GLenum>(param));  break;
+      default:                       UNREACHABLE(); break;
     }
+}
 
-    if (supportsInstancing())
-    {
-        extensionString += "GL_ANGLE_instanced_arrays ";
-    }
+GLint Context::getSamplerParameteri(GLuint sampler, GLenum pname)
+{
+    mResourceManager->checkSamplerAllocation(sampler);
 
-    extensionString += "GL_ANGLE_pack_reverse_row_order ";
+    Sampler *samplerObject = getSampler(sampler);
+    ASSERT(samplerObject);
 
-    if (supportsDXT3Textures())
-    {
-        extensionString += "GL_ANGLE_texture_compression_dxt3 ";
-    }
-    if (supportsDXT5Textures())
+    switch (pname)
     {
-        extensionString += "GL_ANGLE_texture_compression_dxt5 ";
+      case GL_TEXTURE_MIN_FILTER:    return static_cast<GLint>(samplerObject->getMinFilter());
+      case GL_TEXTURE_MAG_FILTER:    return static_cast<GLint>(samplerObject->getMagFilter());
+      case GL_TEXTURE_WRAP_S:        return static_cast<GLint>(samplerObject->getWrapS());
+      case GL_TEXTURE_WRAP_T:        return static_cast<GLint>(samplerObject->getWrapT());
+      case GL_TEXTURE_WRAP_R:        return static_cast<GLint>(samplerObject->getWrapR());
+      case GL_TEXTURE_MIN_LOD:       return uiround<GLint>(samplerObject->getMinLod());
+      case GL_TEXTURE_MAX_LOD:       return uiround<GLint>(samplerObject->getMaxLod());
+      case GL_TEXTURE_COMPARE_MODE:  return static_cast<GLint>(samplerObject->getComparisonMode());
+      case GL_TEXTURE_COMPARE_FUNC:  return static_cast<GLint>(samplerObject->getComparisonFunc());
+      default:                       UNREACHABLE(); return 0;
     }
+}
 
-    extensionString += "GL_ANGLE_texture_usage ";
-    extensionString += "GL_ANGLE_translated_shader_source ";
+GLfloat Context::getSamplerParameterf(GLuint sampler, GLenum pname)
+{
+    mResourceManager->checkSamplerAllocation(sampler);
 
-    // Other vendor-specific extensions
-    if (supportsEventQueries())
-    {
-        extensionString += "GL_NV_fence ";
-    }
+    Sampler *samplerObject = getSampler(sampler);
+    ASSERT(samplerObject);
 
-    std::string::size_type end = extensionString.find_last_not_of(' ');
-    if (end != std::string::npos)
+    switch (pname)
     {
-        extensionString.resize(end+1);
+      case GL_TEXTURE_MIN_FILTER:    return static_cast<GLfloat>(samplerObject->getMinFilter());
+      case GL_TEXTURE_MAG_FILTER:    return static_cast<GLfloat>(samplerObject->getMagFilter());
+      case GL_TEXTURE_WRAP_S:        return static_cast<GLfloat>(samplerObject->getWrapS());
+      case GL_TEXTURE_WRAP_T:        return static_cast<GLfloat>(samplerObject->getWrapT());
+      case GL_TEXTURE_WRAP_R:        return static_cast<GLfloat>(samplerObject->getWrapR());
+      case GL_TEXTURE_MIN_LOD:       return samplerObject->getMinLod();
+      case GL_TEXTURE_MAX_LOD:       return samplerObject->getMaxLod();
+      case GL_TEXTURE_COMPARE_MODE:  return static_cast<GLfloat>(samplerObject->getComparisonMode());
+      case GL_TEXTURE_COMPARE_FUNC:  return static_cast<GLfloat>(samplerObject->getComparisonFunc());
+      default:                       UNREACHABLE(); return 0;
     }
-
-    mExtensionString = makeStaticString(extensionString);
-}
-
-const char *Context::getExtensionString() const
-{
-    return mExtensionString;
 }
 
 void Context::initRendererString()
@@ -2651,329 +2261,168 @@ void Context::initRendererString()
     rendererString << mRenderer->getRendererDescription();
     rendererString << ")";
 
-    mRendererString = makeStaticString(rendererString.str());
+    mRendererString = MakeStaticString(rendererString.str());
 }
 
-const char *Context::getRendererString() const
+const std::string &Context::getRendererString() const
 {
     return mRendererString;
 }
 
-Context::FramebufferTextureSerialSet Context::getBoundFramebufferTextureSerials()
+void Context::initExtensionStrings()
 {
-    FramebufferTextureSerialSet set;
+    mExtensionStrings = mExtensions.getStrings();
 
-    Framebuffer *drawFramebuffer = getDrawFramebuffer();
-    for (unsigned int i = 0; i < IMPLEMENTATION_MAX_DRAW_BUFFERS; i++)
-    {
-        Renderbuffer *renderBuffer = drawFramebuffer->getColorbuffer(i);
-        if (renderBuffer && renderBuffer->getTextureSerial() != 0)
-        {
-            set.insert(renderBuffer->getTextureSerial());
-        }
-    }
-
-    Renderbuffer *depthStencilBuffer = drawFramebuffer->getDepthOrStencilbuffer();
-    if (depthStencilBuffer && depthStencilBuffer->getTextureSerial() != 0)
-    {
-        set.insert(depthStencilBuffer->getTextureSerial());
-    }
-
-    return set;
+    std::ostringstream combinedStringStream;
+    std::copy(mExtensionStrings.begin(), mExtensionStrings.end(), std::ostream_iterator<std::string>(combinedStringStream, " "));
+    mExtensionString = combinedStringStream.str();
 }
 
-void Context::blitFramebuffer(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, 
-                              GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
-                              GLbitfield mask)
+const std::string &Context::getExtensionString() const
 {
-    Framebuffer *readFramebuffer = getReadFramebuffer();
-    Framebuffer *drawFramebuffer = getDrawFramebuffer();
-
-    if (!readFramebuffer || readFramebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE ||
-        !drawFramebuffer || drawFramebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
-    {
-        return gl::error(GL_INVALID_FRAMEBUFFER_OPERATION);
-    }
-
-    if (drawFramebuffer->getSamples() != 0)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    Renderbuffer *readColorBuffer = readFramebuffer->getReadColorbuffer();
-    Renderbuffer *drawColorBuffer = drawFramebuffer->getFirstColorbuffer();
+    return mExtensionString;
+}
 
-    if (drawColorBuffer == NULL)
-    {
-        ERR("Draw buffers formats don't match, which is not supported in this implementation of BlitFramebufferANGLE");
-        return gl::error(GL_INVALID_OPERATION);
-    }
+const std::string &Context::getExtensionString(size_t idx) const
+{
+    return mExtensionStrings[idx];
+}
 
-    int readBufferWidth = readColorBuffer->getWidth();
-    int readBufferHeight = readColorBuffer->getHeight();
-    int drawBufferWidth = drawColorBuffer->getWidth();
-    int drawBufferHeight = drawColorBuffer->getHeight();
+size_t Context::getExtensionStringCount() const
+{
+    return mExtensionStrings.size();
+}
 
-    Rectangle sourceRect;
-    Rectangle destRect;
+size_t Context::getBoundFramebufferTextureSerials(FramebufferTextureSerialArray *outSerialArray)
+{
+    size_t serialCount = 0;
 
-    if (srcX0 < srcX1)
-    {
-        sourceRect.x = srcX0;
-        destRect.x = dstX0;
-        sourceRect.width = srcX1 - srcX0;
-        destRect.width = dstX1 - dstX0;
-    }
-    else
+    Framebuffer *drawFramebuffer = mState.getDrawFramebuffer();
+    for (unsigned int i = 0; i < IMPLEMENTATION_MAX_DRAW_BUFFERS; i++)
     {
-        sourceRect.x = srcX1;
-        destRect.x = dstX1;
-        sourceRect.width = srcX0 - srcX1;
-        destRect.width = dstX0 - dstX1;
+        FramebufferAttachment *attachment = drawFramebuffer->getColorbuffer(i);
+        if (attachment && attachment->isTexture())
+        {
+            Texture *texture = attachment->getTexture();
+            (*outSerialArray)[serialCount++] = texture->getTextureSerial();
+        }
     }
 
-    if (srcY0 < srcY1)
-    {
-        sourceRect.height = srcY1 - srcY0;
-        destRect.height = dstY1 - dstY0;
-        sourceRect.y = srcY0;
-        destRect.y = dstY0;
-    }
-    else
+    FramebufferAttachment *depthStencilAttachment = drawFramebuffer->getDepthOrStencilbuffer();
+    if (depthStencilAttachment && depthStencilAttachment->isTexture())
     {
-        sourceRect.height = srcY0 - srcY1;
-        destRect.height = dstY0 - srcY1;
-        sourceRect.y = srcY1;
-        destRect.y = dstY1;
+        Texture *depthStencilTexture = depthStencilAttachment->getTexture();
+        (*outSerialArray)[serialCount++] = depthStencilTexture->getTextureSerial();
     }
 
-    Rectangle sourceScissoredRect = sourceRect;
-    Rectangle destScissoredRect = destRect;
-
-    if (mState.scissorTest)
-    {
-        // Only write to parts of the destination framebuffer which pass the scissor test.
-        if (destRect.x < mState.scissor.x)
-        {
-            int xDiff = mState.scissor.x - destRect.x;
-            destScissoredRect.x = mState.scissor.x;
-            destScissoredRect.width -= xDiff;
-            sourceScissoredRect.x += xDiff;
-            sourceScissoredRect.width -= xDiff;
+    std::sort(outSerialArray->begin(), outSerialArray->begin() + serialCount);
 
-        }
-
-        if (destRect.x + destRect.width > mState.scissor.x + mState.scissor.width)
-        {
-            int xDiff = (destRect.x + destRect.width) - (mState.scissor.x + mState.scissor.width);
-            destScissoredRect.width -= xDiff;
-            sourceScissoredRect.width -= xDiff;
-        }
-
-        if (destRect.y < mState.scissor.y)
-        {
-            int yDiff = mState.scissor.y - destRect.y;
-            destScissoredRect.y = mState.scissor.y;
-            destScissoredRect.height -= yDiff;
-            sourceScissoredRect.y += yDiff;
-            sourceScissoredRect.height -= yDiff;
-        }
+    return serialCount;
+}
 
-        if (destRect.y + destRect.height > mState.scissor.y + mState.scissor.height)
-        {
-            int yDiff = (destRect.y + destRect.height) - (mState.scissor.y + mState.scissor.height);
-            destScissoredRect.height  -= yDiff;
-            sourceScissoredRect.height -= yDiff;
-        }
-    }
+void Context::blitFramebuffer(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
+                              GLbitfield mask, GLenum filter)
+{
+    Framebuffer *readFramebuffer = mState.getReadFramebuffer();
+    Framebuffer *drawFramebuffer = mState.getDrawFramebuffer();
 
     bool blitRenderTarget = false;
-    bool blitDepthStencil = false;
-
-    Rectangle sourceTrimmedRect = sourceScissoredRect;
-    Rectangle destTrimmedRect = destScissoredRect;
-
-    // The source & destination rectangles also may need to be trimmed if they fall out of the bounds of 
-    // the actual draw and read surfaces.
-    if (sourceTrimmedRect.x < 0)
+    bool blitDepth = false;
+    bool blitStencil = false;
+    if ((mask & GL_COLOR_BUFFER_BIT) && readFramebuffer->getReadColorbuffer() && drawFramebuffer->getFirstColorbuffer())
     {
-        int xDiff = 0 - sourceTrimmedRect.x;
-        sourceTrimmedRect.x = 0;
-        sourceTrimmedRect.width -= xDiff;
-        destTrimmedRect.x += xDiff;
-        destTrimmedRect.width -= xDiff;
+        blitRenderTarget = true;
     }
-
-    if (sourceTrimmedRect.x + sourceTrimmedRect.width > readBufferWidth)
+    if ((mask & GL_STENCIL_BUFFER_BIT) && readFramebuffer->getStencilbuffer() && drawFramebuffer->getStencilbuffer())
     {
-        int xDiff = (sourceTrimmedRect.x + sourceTrimmedRect.width) - readBufferWidth;
-        sourceTrimmedRect.width -= xDiff;
-        destTrimmedRect.width -= xDiff;
+        blitStencil = true;
     }
-
-    if (sourceTrimmedRect.y < 0)
+    if ((mask & GL_DEPTH_BUFFER_BIT) && readFramebuffer->getDepthbuffer() && drawFramebuffer->getDepthbuffer())
     {
-        int yDiff = 0 - sourceTrimmedRect.y;
-        sourceTrimmedRect.y = 0;
-        sourceTrimmedRect.height -= yDiff;
-        destTrimmedRect.y += yDiff;
-        destTrimmedRect.height -= yDiff;
+        blitDepth = true;
     }
 
-    if (sourceTrimmedRect.y + sourceTrimmedRect.height > readBufferHeight)
+    Rectangle srcRect(srcX0, srcY0, srcX1 - srcX0, srcY1 - srcY0);
+    Rectangle dstRect(dstX0, dstY0, dstX1 - dstX0, dstY1 - dstY0);
+    if (blitRenderTarget || blitDepth || blitStencil)
     {
-        int yDiff = (sourceTrimmedRect.y + sourceTrimmedRect.height) - readBufferHeight;
-        sourceTrimmedRect.height -= yDiff;
-        destTrimmedRect.height -= yDiff;
+        const Rectangle *scissor = mState.isScissorTestEnabled() ? &mState.getScissor() : NULL;
+        mRenderer->blitRect(readFramebuffer, srcRect, drawFramebuffer, dstRect, scissor,
+                            blitRenderTarget, blitDepth, blitStencil, filter);
     }
+}
 
-    if (destTrimmedRect.x < 0)
-    {
-        int xDiff = 0 - destTrimmedRect.x;
-        destTrimmedRect.x = 0;
-        destTrimmedRect.width -= xDiff;
-        sourceTrimmedRect.x += xDiff;
-        sourceTrimmedRect.width -= xDiff;
-    }
+void Context::releaseShaderCompiler()
+{
+    mRenderer->releaseShaderCompiler();
+}
 
-    if (destTrimmedRect.x + destTrimmedRect.width > drawBufferWidth)
-    {
-        int xDiff = (destTrimmedRect.x + destTrimmedRect.width) - drawBufferWidth;
-        destTrimmedRect.width -= xDiff;
-        sourceTrimmedRect.width -= xDiff;
-    }
+void Context::initCaps(GLuint clientVersion)
+{
+    mCaps = mRenderer->getRendererCaps();
 
-    if (destTrimmedRect.y < 0)
-    {
-        int yDiff = 0 - destTrimmedRect.y;
-        destTrimmedRect.y = 0;
-        destTrimmedRect.height -= yDiff;
-        sourceTrimmedRect.y += yDiff;
-        sourceTrimmedRect.height -= yDiff;
-    }
+    mExtensions = mRenderer->getRendererExtensions();
 
-    if (destTrimmedRect.y + destTrimmedRect.height > drawBufferHeight)
+    if (clientVersion < 3)
     {
-        int yDiff = (destTrimmedRect.y + destTrimmedRect.height) - drawBufferHeight;
-        destTrimmedRect.height -= yDiff;
-        sourceTrimmedRect.height -= yDiff;
+        // Disable ES3+ extensions
+        mExtensions.colorBufferFloat = false;
     }
 
-    bool partialBufferCopy = false;
-    if (sourceTrimmedRect.height < readBufferHeight ||
-        sourceTrimmedRect.width < readBufferWidth || 
-        destTrimmedRect.height < drawBufferHeight ||
-        destTrimmedRect.width < drawBufferWidth ||
-        sourceTrimmedRect.y != 0 || destTrimmedRect.y != 0 || sourceTrimmedRect.x != 0 || destTrimmedRect.x != 0)
+    if (clientVersion > 2)
     {
-        partialBufferCopy = true;
+        // FIXME(geofflang): Don't support EXT_sRGB in non-ES2 contexts
+        //mExtensions.sRGB = false;
     }
 
-    if (mask & GL_COLOR_BUFFER_BIT)
-    {
-        const GLenum readColorbufferType = readFramebuffer->getReadColorbufferType();
-        const bool validReadType = (readColorbufferType == GL_TEXTURE_2D) || (readColorbufferType == GL_RENDERBUFFER);
-        bool validDrawType = true;
-        bool validDrawFormat = true;
-
-        for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
-        {
-            if (drawFramebuffer->isEnabledColorAttachment(colorAttachment))
-            {
-                if (drawFramebuffer->getColorbufferType(colorAttachment) != GL_TEXTURE_2D &&
-                    drawFramebuffer->getColorbufferType(colorAttachment) != GL_RENDERBUFFER)
-                {
-                    validDrawType = false;
-                }
+    // Apply implementation limits
+    mCaps.maxVertexAttributes = std::min<GLuint>(mCaps.maxVertexAttributes, MAX_VERTEX_ATTRIBS);
+    mCaps.maxVertexUniformBlocks = std::min<GLuint>(mCaps.maxVertexUniformBlocks, IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS);
+    mCaps.maxVertexOutputComponents = std::min<GLuint>(mCaps.maxVertexOutputComponents, IMPLEMENTATION_MAX_VARYING_VECTORS * 4);
 
-                if (drawFramebuffer->getColorbuffer(colorAttachment)->getActualFormat() != readColorBuffer->getActualFormat())
-                {
-                    validDrawFormat = false;
-                }
-            }
-        }
+    mCaps.maxFragmentInputComponents = std::min<GLuint>(mCaps.maxFragmentInputComponents, IMPLEMENTATION_MAX_VARYING_VECTORS * 4);
 
-        if (!validReadType || !validDrawType || !validDrawFormat)
-        {
-            ERR("Color buffer format conversion in BlitFramebufferANGLE not supported by this implementation");
-            return gl::error(GL_INVALID_OPERATION);
-        }
-        
-        if (partialBufferCopy && readFramebuffer->getSamples() != 0)
-        {
-            return gl::error(GL_INVALID_OPERATION);
-        }
-
-        blitRenderTarget = true;
-
-    }
+    GLuint maxSamples = 0;
+    mCaps.compressedTextureFormats.clear();
 
-    if (mask & (GL_DEPTH_BUFFER_BIT | GL_STENCIL_BUFFER_BIT))
+    const TextureCapsMap &rendererFormats = mRenderer->getRendererTextureCaps();
+    for (TextureCapsMap::const_iterator i = rendererFormats.begin(); i != rendererFormats.end(); i++)
     {
-        Renderbuffer *readDSBuffer = NULL;
-        Renderbuffer *drawDSBuffer = NULL;
+        GLenum format = i->first;
+        TextureCaps formatCaps = i->second;
 
-        // We support OES_packed_depth_stencil, and do not support a separately attached depth and stencil buffer, so if we have
-        // both a depth and stencil buffer, it will be the same buffer.
+        const InternalFormat &formatInfo = GetInternalFormatInfo(format);
 
-        if (mask & GL_DEPTH_BUFFER_BIT)
-        {
-            if (readFramebuffer->getDepthbuffer() && drawFramebuffer->getDepthbuffer())
-            {
-                if (readFramebuffer->getDepthbufferType() != drawFramebuffer->getDepthbufferType() ||
-                    readFramebuffer->getDepthbuffer()->getActualFormat() != drawFramebuffer->getDepthbuffer()->getActualFormat())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+        // Update the format caps based on the client version and extensions
+        formatCaps.texturable = formatInfo.textureSupport(clientVersion, mExtensions);
+        formatCaps.renderable = formatInfo.renderSupport(clientVersion, mExtensions);
+        formatCaps.filterable = formatInfo.filterSupport(clientVersion, mExtensions);
 
-                blitDepthStencil = true;
-                readDSBuffer = readFramebuffer->getDepthbuffer();
-                drawDSBuffer = drawFramebuffer->getDepthbuffer();
-            }
-        }
-
-        if (mask & GL_STENCIL_BUFFER_BIT)
+        // OpenGL ES does not support multisampling with integer formats
+        if (!formatInfo.renderSupport || formatInfo.componentType == GL_INT || formatInfo.componentType == GL_UNSIGNED_INT)
         {
-            if (readFramebuffer->getStencilbuffer() && drawFramebuffer->getStencilbuffer())
-            {
-                if (readFramebuffer->getStencilbufferType() != drawFramebuffer->getStencilbufferType() ||
-                    readFramebuffer->getStencilbuffer()->getActualFormat() != drawFramebuffer->getStencilbuffer()->getActualFormat())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                blitDepthStencil = true;
-                readDSBuffer = readFramebuffer->getStencilbuffer();
-                drawDSBuffer = drawFramebuffer->getStencilbuffer();
-            }
+            formatCaps.sampleCounts.clear();
         }
+        maxSamples = std::max(maxSamples, formatCaps.getMaxSamples());
 
-        if (partialBufferCopy)
+        if (formatCaps.texturable && formatInfo.compressed)
         {
-            ERR("Only whole-buffer depth and stencil blits are supported by this implementation.");
-            return gl::error(GL_INVALID_OPERATION); // only whole-buffer copies are permitted
+            mCaps.compressedTextureFormats.push_back(format);
         }
 
-        if ((drawDSBuffer && drawDSBuffer->getSamples() != 0) || 
-            (readDSBuffer && readDSBuffer->getSamples() != 0))
-        {
-            return gl::error(GL_INVALID_OPERATION);
-        }
+        mTextureCaps.insert(format, formatCaps);
     }
 
-    if (blitRenderTarget || blitDepthStencil)
-    {
-        mRenderer->blitRect(readFramebuffer, sourceTrimmedRect, drawFramebuffer, destTrimmedRect, blitRenderTarget, blitDepthStencil);
-    }
+    mExtensions.maxSamples = maxSamples;
 }
 
 }
 
 extern "C"
 {
-gl::Context *glCreateContext(const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess)
+gl::Context *glCreateContext(int clientVersion, const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess)
 {
-    return new gl::Context(shareContext, renderer, notifyResets, robustAccess);
+    return new gl::Context(clientVersion, shareContext, renderer, notifyResets, robustAccess);
 }
 
 void glDestroyContext(gl::Context *context)
diff --git a/src/3rdparty/angle/src/libGLESv2/Context.h b/src/3rdparty/angle/src/libGLESv2/Context.h
index 3dc95e3b95..1b888aec83 100644
--- a/src/3rdparty/angle/src/libGLESv2/Context.h
+++ b/src/3rdparty/angle/src/libGLESv2/Context.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,26 +10,23 @@
 #ifndef LIBGLESV2_CONTEXT_H_
 #define LIBGLESV2_CONTEXT_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
-#include <GLES2/gl2ext.h>
-#define EGLAPI
-#include <EGL/egl.h>
-
-#include <string>
-#include <map>
-#include <set>
-#ifdef _MSC_VER
-#include <hash_map>
-#else
-#include <unordered_map>
-#endif
-
 #include "common/angleutils.h"
 #include "common/RefCountObject.h"
+#include "libGLESv2/Caps.h"
+#include "libGLESv2/Error.h"
 #include "libGLESv2/HandleAllocator.h"
 #include "libGLESv2/angletypes.h"
 #include "libGLESv2/Constants.h"
+#include "libGLESv2/VertexAttribute.h"
+#include "libGLESv2/State.h"
+
+#include "angle_gl.h"
+
+#include <string>
+#include <set>
+#include <map>
+#include <unordered_map>
+#include <array>
 
 namespace rx
 {
@@ -49,6 +46,8 @@ class ProgramBinary;
 class Texture;
 class Texture2D;
 class TextureCubeMap;
+class Texture3D;
+class Texture2DArray;
 class Framebuffer;
 class Renderbuffer;
 class RenderbufferStorage;
@@ -56,222 +55,28 @@ class Colorbuffer;
 class Depthbuffer;
 class Stencilbuffer;
 class DepthStencilbuffer;
-class Fence;
+class FenceNV;
+class FenceSync;
 class Query;
 class ResourceManager;
 class Buffer;
-
-enum QueryType
-{
-    QUERY_ANY_SAMPLES_PASSED,
-    QUERY_ANY_SAMPLES_PASSED_CONSERVATIVE,
-
-    QUERY_TYPE_COUNT
-};
-
-// Helper structure describing a single vertex attribute
-class VertexAttribute
-{
-  public:
-    VertexAttribute() : mType(GL_FLOAT), mSize(4), mNormalized(false), mStride(0), mPointer(NULL), mArrayEnabled(false), mDivisor(0)
-    {
-        mCurrentValue[0] = 0.0f;
-        mCurrentValue[1] = 0.0f;
-        mCurrentValue[2] = 0.0f;
-        mCurrentValue[3] = 1.0f;
-    }
-
-    int typeSize() const
-    {
-        switch (mType)
-        {
-          case GL_BYTE:           return mSize * sizeof(GLbyte);
-          case GL_UNSIGNED_BYTE:  return mSize * sizeof(GLubyte);
-          case GL_SHORT:          return mSize * sizeof(GLshort);
-          case GL_UNSIGNED_SHORT: return mSize * sizeof(GLushort);
-          case GL_FIXED:          return mSize * sizeof(GLfixed);
-          case GL_FLOAT:          return mSize * sizeof(GLfloat);
-          default: UNREACHABLE(); return mSize * sizeof(GLfloat);
-        }
-    }
-
-    GLsizei stride() const
-    {
-        return mStride ? mStride : typeSize();
-    }
-
-    // From glVertexAttribPointer
-    GLenum mType;
-    GLint mSize;
-    bool mNormalized;
-    GLsizei mStride;   // 0 means natural stride
-
-    union
-    {
-        const void *mPointer;
-        intptr_t mOffset;
-    };
-
-    BindingPointer<Buffer> mBoundBuffer;   // Captured when glVertexAttribPointer is called.
-
-    bool mArrayEnabled;   // From glEnable/DisableVertexAttribArray
-    float mCurrentValue[4];   // From glVertexAttrib
-    unsigned int mDivisor;
-};
-
-// Helper structure to store all raw state
-struct State
-{
-    Color colorClearValue;
-    GLclampf depthClearValue;
-    int stencilClearValue;
-
-    RasterizerState rasterizer;
-    bool scissorTest;
-    Rectangle scissor;
-
-    BlendState blend;
-    Color blendColor;
-    bool sampleCoverage;
-    GLclampf sampleCoverageValue;
-    bool sampleCoverageInvert;
-
-    DepthStencilState depthStencil;
-    GLint stencilRef;
-    GLint stencilBackRef;
-
-    GLfloat lineWidth;
-
-    GLenum generateMipmapHint;
-    GLenum fragmentShaderDerivativeHint;
-
-    Rectangle viewport;
-    float zNear;
-    float zFar;
-
-    unsigned int activeSampler;   // Active texture unit selector - GL_TEXTURE0
-    BindingPointer<Buffer> arrayBuffer;
-    BindingPointer<Buffer> elementArrayBuffer;
-    GLuint readFramebuffer;
-    GLuint drawFramebuffer;
-    BindingPointer<Renderbuffer> renderbuffer;
-    GLuint currentProgram;
-
-    VertexAttribute vertexAttribute[MAX_VERTEX_ATTRIBS];
-    BindingPointer<Texture> samplerTexture[TEXTURE_TYPE_COUNT][IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS];
-    BindingPointer<Query> activeQuery[QUERY_TYPE_COUNT];
-
-    GLint unpackAlignment;
-    GLint packAlignment;
-    bool packReverseRowOrder;
-};
+struct VertexAttribute;
+class VertexArray;
+class Sampler;
+class TransformFeedback;
 
 class Context
 {
   public:
-    Context(const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess);
+    Context(int clientVersion, const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess);
 
-    ~Context();
+    virtual ~Context();
 
     void makeCurrent(egl::Surface *surface);
 
     virtual void markContextLost();
     bool isContextLost();
 
-    // State manipulation
-    void setClearColor(float red, float green, float blue, float alpha);
-
-    void setClearDepth(float depth);
-
-    void setClearStencil(int stencil);
-
-    void setCullFace(bool enabled);
-    bool isCullFaceEnabled() const;
-
-    void setCullMode(GLenum mode);
-
-    void setFrontFace(GLenum front);
-
-    void setDepthTest(bool enabled);
-    bool isDepthTestEnabled() const;
-
-    void setDepthFunc(GLenum depthFunc);
-
-    void setDepthRange(float zNear, float zFar);
-    
-    void setBlend(bool enabled);
-    bool isBlendEnabled() const;
-
-    void setBlendFactors(GLenum sourceRGB, GLenum destRGB, GLenum sourceAlpha, GLenum destAlpha);
-    void setBlendColor(float red, float green, float blue, float alpha);
-    void setBlendEquation(GLenum rgbEquation, GLenum alphaEquation);
-
-    void setStencilTest(bool enabled);
-    bool isStencilTestEnabled() const;
-
-    void setStencilParams(GLenum stencilFunc, GLint stencilRef, GLuint stencilMask);
-    void setStencilBackParams(GLenum stencilBackFunc, GLint stencilBackRef, GLuint stencilBackMask);
-    void setStencilWritemask(GLuint stencilWritemask);
-    void setStencilBackWritemask(GLuint stencilBackWritemask);
-    void setStencilOperations(GLenum stencilFail, GLenum stencilPassDepthFail, GLenum stencilPassDepthPass);
-    void setStencilBackOperations(GLenum stencilBackFail, GLenum stencilBackPassDepthFail, GLenum stencilBackPassDepthPass);
-
-    void setPolygonOffsetFill(bool enabled);
-    bool isPolygonOffsetFillEnabled() const;
-
-    void setPolygonOffsetParams(GLfloat factor, GLfloat units);
-
-    void setSampleAlphaToCoverage(bool enabled);
-    bool isSampleAlphaToCoverageEnabled() const;
-
-    void setSampleCoverage(bool enabled);
-    bool isSampleCoverageEnabled() const;
-
-    void setSampleCoverageParams(GLclampf value, bool invert);
-
-    void setScissorTest(bool enabled);
-    bool isScissorTestEnabled() const;
-
-    void setDither(bool enabled);
-    bool isDitherEnabled() const;
-
-    void setLineWidth(GLfloat width);
-
-    void setGenerateMipmapHint(GLenum hint);
-    void setFragmentShaderDerivativeHint(GLenum hint);
-
-    void setViewportParams(GLint x, GLint y, GLsizei width, GLsizei height);
-
-    void setScissorParams(GLint x, GLint y, GLsizei width, GLsizei height);
-
-    void setColorMask(bool red, bool green, bool blue, bool alpha);
-    void setDepthMask(bool mask);
-
-    void setActiveSampler(unsigned int active);
-
-    GLuint getReadFramebufferHandle() const;
-    GLuint getDrawFramebufferHandle() const;
-    GLuint getRenderbufferHandle() const;
-
-    GLuint getArrayBufferHandle() const;
-
-    GLuint getActiveQuery(GLenum target) const;
-
-    void setEnableVertexAttribArray(unsigned int attribNum, bool enabled);
-    const VertexAttribute &getVertexAttribState(unsigned int attribNum);
-    void setVertexAttribState(unsigned int attribNum, Buffer *boundBuffer, GLint size, GLenum type,
-                              bool normalized, GLsizei stride, const void *pointer);
-    const void *getVertexAttribPointer(unsigned int attribNum) const;
-
-    void setUnpackAlignment(GLint alignment);
-    GLint getUnpackAlignment() const;
-
-    void setPackAlignment(GLint alignment);
-    GLint getPackAlignment() const;
-
-    void setPackReverseRowOrder(bool reverseRowOrder);
-    bool getPackReverseRowOrder() const;
-
     // These create  and destroy methods are merely pass-throughs to 
     // ResourceManager, which owns these object types
     GLuint createBuffer();
@@ -279,189 +84,227 @@ class Context
     GLuint createProgram();
     GLuint createTexture();
     GLuint createRenderbuffer();
+    GLuint createSampler();
+    GLuint createTransformFeedback();
+    GLsync createFenceSync(GLenum condition);
 
     void deleteBuffer(GLuint buffer);
     void deleteShader(GLuint shader);
     void deleteProgram(GLuint program);
     void deleteTexture(GLuint texture);
     void deleteRenderbuffer(GLuint renderbuffer);
+    void deleteSampler(GLuint sampler);
+    void deleteTransformFeedback(GLuint transformFeedback);
+    void deleteFenceSync(GLsync fenceSync);
 
     // Framebuffers are owned by the Context, so these methods do not pass through
     GLuint createFramebuffer();
     void deleteFramebuffer(GLuint framebuffer);
 
-    // Fences are owned by the Context.
-    GLuint createFence();
-    void deleteFence(GLuint fence);
+    // NV Fences are owned by the Context.
+    GLuint createFenceNV();
+    void deleteFenceNV(GLuint fence);
     
     // Queries are owned by the Context;
     GLuint createQuery();
     void deleteQuery(GLuint query);
 
+    // Vertex arrays are owned by the Context
+    GLuint createVertexArray();
+    void deleteVertexArray(GLuint vertexArray);
+
     void bindArrayBuffer(GLuint buffer);
     void bindElementArrayBuffer(GLuint buffer);
-    void bindTexture2D(GLuint texture);
-    void bindTextureCubeMap(GLuint texture);
+    void bindTexture(GLenum target, GLuint texture);
     void bindReadFramebuffer(GLuint framebuffer);
     void bindDrawFramebuffer(GLuint framebuffer);
     void bindRenderbuffer(GLuint renderbuffer);
+    void bindVertexArray(GLuint vertexArray);
+    void bindSampler(GLuint textureUnit, GLuint sampler);
+    void bindGenericUniformBuffer(GLuint buffer);
+    void bindIndexedUniformBuffer(GLuint buffer, GLuint index, GLintptr offset, GLsizeiptr size);
+    void bindGenericTransformFeedbackBuffer(GLuint buffer);
+    void bindIndexedTransformFeedbackBuffer(GLuint buffer, GLuint index, GLintptr offset, GLsizeiptr size);
+    void bindCopyReadBuffer(GLuint buffer);
+    void bindCopyWriteBuffer(GLuint buffer);
+    void bindPixelPackBuffer(GLuint buffer);
+    void bindPixelUnpackBuffer(GLuint buffer);
     void useProgram(GLuint program);
     void linkProgram(GLuint program);
-    void setProgramBinary(GLuint program, const void *binary, GLint length);
+    void setProgramBinary(GLuint program, GLenum binaryFormat, const void *binary, GLint length);
+    void bindTransformFeedback(GLuint transformFeedback);
 
-    void beginQuery(GLenum target, GLuint query);
-    void endQuery(GLenum target);
+    Error beginQuery(GLenum target, GLuint query);
+    Error endQuery(GLenum target);
 
     void setFramebufferZero(Framebuffer *framebuffer);
 
     void setRenderbufferStorage(GLsizei width, GLsizei height, GLenum internalformat, GLsizei samples);
 
-    void setVertexAttrib(GLuint index, const GLfloat *values);
     void setVertexAttribDivisor(GLuint index, GLuint divisor);
 
+    void samplerParameteri(GLuint sampler, GLenum pname, GLint param);
+    void samplerParameterf(GLuint sampler, GLenum pname, GLfloat param);
+    GLint getSamplerParameteri(GLuint sampler, GLenum pname);
+    GLfloat getSamplerParameterf(GLuint sampler, GLenum pname);
+
     Buffer *getBuffer(GLuint handle);
-    Fence *getFence(GLuint handle);
-    Shader *getShader(GLuint handle);
-    Program *getProgram(GLuint handle);
-    Texture *getTexture(GLuint handle);
-    Framebuffer *getFramebuffer(GLuint handle);
+    FenceNV *getFenceNV(GLuint handle);
+    FenceSync *getFenceSync(GLsync handle) const;
+    Shader *getShader(GLuint handle) const;
+    Program *getProgram(GLuint handle) const;
+    Texture *getTexture(GLuint handle) const;
+    Framebuffer *getFramebuffer(GLuint handle) const;
     Renderbuffer *getRenderbuffer(GLuint handle);
+    VertexArray *getVertexArray(GLuint handle) const;
+    Sampler *getSampler(GLuint handle) const;
     Query *getQuery(GLuint handle, bool create, GLenum type);
+    TransformFeedback *getTransformFeedback(GLuint handle) const;
 
-    Buffer *getArrayBuffer();
-    Buffer *getElementArrayBuffer();
-    ProgramBinary *getCurrentProgramBinary();
-    Texture2D *getTexture2D();
-    TextureCubeMap *getTextureCubeMap();
-    Texture *getSamplerTexture(unsigned int sampler, TextureType type);
-    Framebuffer *getReadFramebuffer();
-    Framebuffer *getDrawFramebuffer();
+    Texture *getTargetTexture(GLenum target) const;
+    Texture2D *getTexture2D() const;
+    TextureCubeMap *getTextureCubeMap() const;
+    Texture3D *getTexture3D() const;
+    Texture2DArray *getTexture2DArray() const;
 
-    bool getFloatv(GLenum pname, GLfloat *params);
-    bool getIntegerv(GLenum pname, GLint *params);
-    bool getBooleanv(GLenum pname, GLboolean *params);
+    Texture *getSamplerTexture(unsigned int sampler, GLenum type) const;
 
-    bool getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *numParams);
+    bool isSampler(GLuint samplerName) const;
 
-    void readPixels(GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei *bufSize, void* pixels);
-    void clear(GLbitfield mask);
-    void drawArrays(GLenum mode, GLint first, GLsizei count, GLsizei instances);
-    void drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei instances);
+    void getBooleanv(GLenum pname, GLboolean *params);
+    void getFloatv(GLenum pname, GLfloat *params);
+    void getIntegerv(GLenum pname, GLint *params);
+    void getInteger64v(GLenum pname, GLint64 *params);
+
+    bool getIndexedIntegerv(GLenum target, GLuint index, GLint *data);
+    bool getIndexedInteger64v(GLenum target, GLuint index, GLint64 *data);
+
+    bool getQueryParameterInfo(GLenum pname, GLenum *type, unsigned int *numParams);
+    bool getIndexedQueryParameterInfo(GLenum target, GLenum *type, unsigned int *numParams);
+
+    Error clear(GLbitfield mask);
+    Error clearBufferfv(GLenum buffer, int drawbuffer, const float *values);
+    Error clearBufferuiv(GLenum buffer, int drawbuffer, const unsigned int *values);
+    Error clearBufferiv(GLenum buffer, int drawbuffer, const int *values);
+    Error clearBufferfi(GLenum buffer, int drawbuffer, float depth, int stencil);
+
+    Error readPixels(GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei *bufSize, void* pixels);
+    Error drawArrays(GLenum mode, GLint first, GLsizei count, GLsizei instances);
+    Error drawElements(GLenum mode, GLsizei count, GLenum type,
+                       const GLvoid *indices, GLsizei instances,
+                       const rx::RangeUI &indexRange);
     void sync(bool block);   // flush/finish
 
-    void recordInvalidEnum();
-    void recordInvalidValue();
-    void recordInvalidOperation();
-    void recordOutOfMemory();
-    void recordInvalidFramebufferOperation();
+    void recordError(const Error &error);
 
     GLenum getError();
     GLenum getResetStatus();
     virtual bool isResetNotificationEnabled();
 
-    int getMajorShaderModel() const;
-    float getMaximumPointSize() const;
-    unsigned int getMaximumCombinedTextureImageUnits() const;
-    int getMaximumRenderbufferDimension() const;
-    int getMaximumTextureDimension() const;
-    int getMaximumCubeTextureDimension() const;
-    int getMaximumTextureLevel() const;
-    unsigned int getMaximumRenderTargets() const;
-    GLsizei getMaxSupportedSamples() const;
-    const char *getExtensionString() const;
-    const char *getRendererString() const;
-    bool supportsEventQueries() const;
-    bool supportsOcclusionQueries() const;
-    bool supportsBGRATextures() const;
-    bool supportsDXT1Textures() const;
-    bool supportsDXT3Textures() const;
-    bool supportsDXT5Textures() const;
-    bool supportsFloat32Textures() const;
-    bool supportsFloat32LinearFilter() const;
-    bool supportsFloat32RenderableTextures() const;
-    bool supportsFloat16Textures() const;
-    bool supportsFloat16LinearFilter() const;
-    bool supportsFloat16RenderableTextures() const;
-    bool supportsLuminanceTextures() const;
-    bool supportsLuminanceAlphaTextures() const;
-    bool supportsDepthTextures() const;
-    bool supports32bitIndices() const;
-    bool supportsNonPower2Texture() const;
-    bool supportsInstancing() const;
-    bool supportsTextureFilterAnisotropy() const;
-
-    bool getCurrentReadFormatType(GLenum *format, GLenum *type);
-
-    float getTextureMaxAnisotropy() const;
-
-    void blitFramebuffer(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, 
-                         GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
-                         GLbitfield mask);
+    virtual int getClientVersion() const;
+
+    const Caps &getCaps() const;
+    const TextureCapsMap &getTextureCaps() const;
+    const Extensions &getExtensions() const;
+
+    const std::string &getRendererString() const;
+
+    const std::string &getExtensionString() const;
+    const std::string &getExtensionString(size_t idx) const;
+    size_t getExtensionStringCount() const;
+
+    void getCurrentReadFormatType(GLenum *internalFormat, GLenum *format, GLenum *type);
+
+    void blitFramebuffer(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
+                         GLbitfield mask, GLenum filter);
 
     rx::Renderer *getRenderer() { return mRenderer; }
 
+    State &getState() { return mState; }
+    const State &getState() const { return mState; }
+
+    void releaseShaderCompiler();
+
   private:
     DISALLOW_COPY_AND_ASSIGN(Context);
 
-    bool applyRenderTarget(GLenum drawMode, bool ignoreViewport);
-    void applyState(GLenum drawMode);
-    void applyShaders();
-    void applyTextures();
-    void applyTextures(SamplerType type);
+    // TODO: std::array may become unavailable using older versions of GCC
+    typedef std::array<unsigned int, IMPLEMENTATION_MAX_FRAMEBUFFER_ATTACHMENTS> FramebufferTextureSerialArray;
+
+    Error applyRenderTarget(GLenum drawMode, bool ignoreViewport);
+    Error applyState(GLenum drawMode);
+    Error applyShaders(ProgramBinary *programBinary, bool transformFeedbackActive);
+    Error applyTextures(ProgramBinary *programBinary, SamplerType shaderType, const FramebufferTextureSerialArray &framebufferSerials,
+                        size_t framebufferSerialCount);
+    Error applyTextures(ProgramBinary *programBinary);
+    Error applyUniformBuffers();
+    bool applyTransformFeedbackBuffers();
+    void markTransformFeedbackUsage();
 
     void detachBuffer(GLuint buffer);
     void detachTexture(GLuint texture);
     void detachFramebuffer(GLuint framebuffer);
     void detachRenderbuffer(GLuint renderbuffer);
+    void detachVertexArray(GLuint vertexArray);
+    void detachTransformFeedback(GLuint transformFeedback);
+    void detachSampler(GLuint sampler);
+
+    Error generateSwizzles(ProgramBinary *programBinary, SamplerType type);
+    Error generateSwizzles(ProgramBinary *programBinary);
 
-    Texture *getIncompleteTexture(TextureType type);
+    Texture *getIncompleteTexture(GLenum type);
 
     bool skipDraw(GLenum drawMode);
 
-    void initExtensionString();
     void initRendererString();
+    void initExtensionStrings();
 
-    typedef std::set<unsigned> FramebufferTextureSerialSet;
-    FramebufferTextureSerialSet getBoundFramebufferTextureSerials();
+    size_t getBoundFramebufferTextureSerials(FramebufferTextureSerialArray *outSerialArray);
 
-    rx::Renderer *const mRenderer;
+    void initCaps(GLuint clientVersion);
 
+    // Caps to use for validation
+    Caps mCaps;
+    TextureCapsMap mTextureCaps;
+    Extensions mExtensions;
+
+    rx::Renderer *const mRenderer;
     State mState;
 
-    BindingPointer<Texture2D> mTexture2DZero;
-    BindingPointer<TextureCubeMap> mTextureCubeMapZero;
+    int mClientVersion;
 
-#ifndef HASH_MAP
-# ifdef _MSC_VER
-#  define HASH_MAP stdext::hash_map
-# else
-#  define HASH_MAP std::unordered_map
-# endif
-#endif
+    typedef std::map< GLenum, BindingPointer<Texture> > TextureMap;
+    TextureMap mZeroTextures;
+    TextureMap mIncompleteTextures;
 
-    typedef HASH_MAP<GLuint, Framebuffer*> FramebufferMap;
+    typedef std::unordered_map<GLuint, Framebuffer*> FramebufferMap;
     FramebufferMap mFramebufferMap;
     HandleAllocator mFramebufferHandleAllocator;
 
-    typedef HASH_MAP<GLuint, Fence*> FenceMap;
-    FenceMap mFenceMap;
-    HandleAllocator mFenceHandleAllocator;
+    typedef std::unordered_map<GLuint, FenceNV*> FenceNVMap;
+    FenceNVMap mFenceNVMap;
+    HandleAllocator mFenceNVHandleAllocator;
 
-    typedef HASH_MAP<GLuint, Query*> QueryMap;
+    typedef std::unordered_map<GLuint, Query*> QueryMap;
     QueryMap mQueryMap;
     HandleAllocator mQueryHandleAllocator;
 
-    const char *mExtensionString;
-    const char *mRendererString;
-    
-    BindingPointer<Texture> mIncompleteTextures[TEXTURE_TYPE_COUNT];
+    typedef std::unordered_map<GLuint, VertexArray*> VertexArrayMap;
+    VertexArrayMap mVertexArrayMap;
+    HandleAllocator mVertexArrayHandleAllocator;
+
+    BindingPointer<TransformFeedback> mTransformFeedbackZero;
+    typedef std::unordered_map<GLuint, TransformFeedback*> TransformFeedbackMap;
+    TransformFeedbackMap mTransformFeedbackMap;
+    HandleAllocator mTransformFeedbackAllocator;
+
+    std::string mRendererString;
+    std::string mExtensionString;
+    std::vector<std::string> mExtensionStrings;
 
     // Recorded errors
-    bool mInvalidEnum;
-    bool mInvalidValue;
-    bool mInvalidOperation;
-    bool mOutOfMemory;
-    bool mInvalidFramebufferOperation;
+    typedef std::set<GLenum> ErrorSet;
+    ErrorSet mErrors;
 
     // Current/lost context flags
     bool mHasBeenCurrent;
@@ -470,39 +313,6 @@ class Context
     GLenum mResetStrategy;
     bool mRobustAccess;
 
-    BindingPointer<ProgramBinary> mCurrentProgramBinary;
-    Framebuffer *mBoundDrawFramebuffer;
-
-    int mMajorShaderModel;
-    float mMaximumPointSize;
-    bool mSupportsVertexTexture;
-    bool mSupportsNonPower2Texture;
-    bool mSupportsInstancing;
-    int  mMaxViewportDimension;
-    int  mMaxRenderbufferDimension;
-    int  mMaxTextureDimension;
-    int  mMaxCubeTextureDimension;
-    int  mMaxTextureLevel;
-    float mMaxTextureAnisotropy;
-    bool mSupportsEventQueries;
-    bool mSupportsOcclusionQueries;
-    bool mSupportsBGRATextures;
-    bool mSupportsDXT1Textures;
-    bool mSupportsDXT3Textures;
-    bool mSupportsDXT5Textures;
-    bool mSupportsFloat32Textures;
-    bool mSupportsFloat32LinearFilter;
-    bool mSupportsFloat32RenderableTextures;
-    bool mSupportsFloat16Textures;
-    bool mSupportsFloat16LinearFilter;
-    bool mSupportsFloat16RenderableTextures;
-    bool mSupportsLuminanceTextures;
-    bool mSupportsLuminanceAlphaTextures;
-    bool mSupportsDepthTextures;
-    bool mSupports32bitIndices;
-    bool mSupportsTextureFilterAnisotropy;
-    int mNumCompressedTextureFormats;
-
     ResourceManager *mResourceManager;
 };
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Error.cpp b/src/3rdparty/angle/src/libGLESv2/Error.cpp
new file mode 100644
index 0000000000..cc7d17eb37
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/Error.cpp
@@ -0,0 +1,48 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Error.cpp: Implements the gl::Error class which encapsulates an OpenGL error
+// and optional error message.
+
+#include "libGLESv2/Error.h"
+
+#include "common/angleutils.h"
+
+#include <cstdarg>
+
+namespace gl
+{
+
+Error::Error(GLenum errorCode)
+    : mCode(errorCode),
+      mMessage()
+{
+}
+
+Error::Error(GLenum errorCode, const char *msg, ...)
+    : mCode(errorCode),
+      mMessage()
+{
+    va_list vararg;
+    va_start(vararg, msg);
+    mMessage = FormatString(msg, vararg);
+    va_end(vararg);
+}
+
+Error::Error(const Error &other)
+    : mCode(other.mCode),
+      mMessage(other.mMessage)
+{
+}
+
+Error &Error::operator=(const Error &other)
+{
+    mCode = other.mCode;
+    mMessage = other.mMessage;
+    return *this;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/Error.h b/src/3rdparty/angle/src/libGLESv2/Error.h
new file mode 100644
index 0000000000..b70b5a531c
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/Error.h
@@ -0,0 +1,39 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+// Error.h: Defines the gl::Error class which encapsulates an OpenGL error
+// and optional error message.
+
+#ifndef LIBGLESV2_ERROR_H_
+#define LIBGLESV2_ERROR_H_
+
+#include "angle_gl.h"
+
+#include <string>
+
+namespace gl
+{
+
+class Error
+{
+  public:
+    explicit Error(GLenum errorCode);
+    Error(GLenum errorCode, const char *msg, ...);
+    Error(const Error &other);
+    Error &operator=(const Error &other);
+
+    GLenum getCode() const { return mCode; }
+    bool isError() const { return (mCode != GL_NO_ERROR); }
+
+    const std::string &getMessage() const { return mMessage; }
+
+  private:
+    GLenum mCode;
+    std::string mMessage;
+};
+
+}
+
+#endif // LIBGLESV2_ERROR_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/Fence.cpp b/src/3rdparty/angle/src/libGLESv2/Fence.cpp
index e4218bbeec..ee9a07a5c4 100644
--- a/src/3rdparty/angle/src/libGLESv2/Fence.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Fence.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -7,46 +6,189 @@
 
 // Fence.cpp: Implements the gl::Fence class, which supports the GL_NV_fence extension.
 
+// Important note on accurate timers in Windows:
+//
+// QueryPerformanceCounter has a few major issues, including being 10x as expensive to call
+// as timeGetTime on laptops and "jumping" during certain hardware events.
+//
+// See the comments at the top of the Chromium source file "chromium/src/base/time/time_win.cc"
+//   https://code.google.com/p/chromium/codesearch#chromium/src/base/time/time_win.cc
+//
+// We still opt to use QPC. In the present and moving forward, most newer systems will not suffer
+// from buggy implementations.
+
 #include "libGLESv2/Fence.h"
 #include "libGLESv2/renderer/FenceImpl.h"
 #include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/main.h"
+
+#include "angle_gl.h"
 
 namespace gl
 {
 
-Fence::Fence(rx::Renderer *renderer)
+FenceNV::FenceNV(rx::Renderer *renderer)
 {
     mFence = renderer->createFence();
 }
 
-Fence::~Fence()
+FenceNV::~FenceNV()
 {
     delete mFence;
 }
 
-GLboolean Fence::isFence()
+GLboolean FenceNV::isFence() const
 {
-    return mFence->isFence();
+    // GL_NV_fence spec:
+    // A name returned by GenFencesNV, but not yet set via SetFenceNV, is not the name of an existing fence.
+    return (mFence->isSet() ? GL_TRUE : GL_FALSE);
 }
 
-void Fence::setFence(GLenum condition)
+void FenceNV::setFence(GLenum condition)
 {
-    mFence->setFence(condition);
+    mFence->set();
+
+    mCondition = condition;
+    mStatus = GL_FALSE;
 }
 
-GLboolean Fence::testFence()
+GLboolean FenceNV::testFence()
 {
-    return mFence->testFence();
+    // Flush the command buffer by default
+    bool result = mFence->test(true);
+
+    mStatus = (result ? GL_TRUE : GL_FALSE);
+    return mStatus;
 }
 
-void Fence::finishFence()
+void FenceNV::finishFence()
 {
-    mFence->finishFence();
+    ASSERT(mFence->isSet());
+
+    while (!mFence->test(true))
+    {
+        Sleep(0);
+    }
 }
 
-void Fence::getFenceiv(GLenum pname, GLint *params)
+GLint FenceNV::getFencei(GLenum pname)
 {
-    mFence->getFenceiv(pname, params);
+    ASSERT(mFence->isSet());
+
+    switch (pname)
+    {
+      case GL_FENCE_STATUS_NV:
+        {
+            // GL_NV_fence spec:
+            // Once the status of a fence has been finished (via FinishFenceNV) or tested and the returned status is TRUE (via either TestFenceNV
+            // or GetFenceivNV querying the FENCE_STATUS_NV), the status remains TRUE until the next SetFenceNV of the fence.
+            if (mStatus == GL_TRUE)
+            {
+                return GL_TRUE;
+            }
+
+            mStatus = (mFence->test(false) ? GL_TRUE : GL_FALSE);
+            return mStatus;
+        }
+
+      case GL_FENCE_CONDITION_NV:
+        return mCondition;
+
+      default: UNREACHABLE(); return 0;
+    }
+}
+
+FenceSync::FenceSync(rx::Renderer *renderer, GLuint id)
+    : RefCountObject(id)
+{
+    mFence = renderer->createFence();
+
+    LARGE_INTEGER counterFreqency = { 0 };
+    BOOL success = QueryPerformanceFrequency(&counterFreqency);
+    UNUSED_ASSERTION_VARIABLE(success);
+    ASSERT(success);
+
+    mCounterFrequency = counterFreqency.QuadPart;
+}
+
+FenceSync::~FenceSync()
+{
+    delete mFence;
+}
+
+void FenceSync::set(GLenum condition)
+{
+    mCondition = condition;
+    mFence->set();
+}
+
+GLenum FenceSync::clientWait(GLbitfield flags, GLuint64 timeout)
+{
+    ASSERT(mFence->isSet());
+
+    bool flushCommandBuffer = ((flags & GL_SYNC_FLUSH_COMMANDS_BIT) != 0);
+
+    if (mFence->test(flushCommandBuffer))
+    {
+        return GL_ALREADY_SIGNALED;
+    }
+
+    if (mFence->hasError())
+    {
+        return GL_WAIT_FAILED;
+    }
+
+    if (timeout == 0)
+    {
+        return GL_TIMEOUT_EXPIRED;
+    }
+
+    LARGE_INTEGER currentCounter = { 0 };
+    BOOL success = QueryPerformanceCounter(&currentCounter);
+    UNUSED_ASSERTION_VARIABLE(success);
+    ASSERT(success);
+
+    LONGLONG timeoutInSeconds = static_cast<LONGLONG>(timeout) * static_cast<LONGLONG>(1000000ll);
+    LONGLONG endCounter = currentCounter.QuadPart + mCounterFrequency * timeoutInSeconds;
+
+    while (currentCounter.QuadPart < endCounter && !mFence->test(flushCommandBuffer))
+    {
+        Sleep(0);
+        BOOL success = QueryPerformanceCounter(&currentCounter);
+        UNUSED_ASSERTION_VARIABLE(success);
+        ASSERT(success);
+    }
+
+    if (mFence->hasError())
+    {
+        return GL_WAIT_FAILED;
+    }
+
+    if (currentCounter.QuadPart >= endCounter)
+    {
+        return GL_TIMEOUT_EXPIRED;
+    }
+
+    return GL_CONDITION_SATISFIED;
+}
+
+void FenceSync::serverWait()
+{
+    // Because our API is currently designed to be called from a single thread, we don't need to do
+    // extra work for a server-side fence. GPU commands issued after the fence is created will always
+    // be processed after the fence is signaled.
+}
+
+GLenum FenceSync::getStatus() const
+{
+    if (mFence->test(false))
+    {
+        // The spec does not specify any way to report errors during the status test (e.g. device lost)
+        // so we report the fence is unblocked in case of error or signaled.
+        return GL_SIGNALED;
+    }
+
+    return GL_UNSIGNALED;
 }
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Fence.h b/src/3rdparty/angle/src/libGLESv2/Fence.h
index 1cedebb112..291edb3de1 100644
--- a/src/3rdparty/angle/src/libGLESv2/Fence.h
+++ b/src/3rdparty/angle/src/libGLESv2/Fence.h
@@ -10,6 +10,7 @@
 #define LIBGLESV2_FENCE_H_
 
 #include "common/angleutils.h"
+#include "common/RefCountObject.h"
 
 namespace rx
 {
@@ -20,22 +21,50 @@ class FenceImpl;
 namespace gl
 {
 
-class Fence
+class FenceNV
 {
   public:
-    explicit Fence(rx::Renderer *renderer);
-    virtual ~Fence();
+    explicit FenceNV(rx::Renderer *renderer);
+    virtual ~FenceNV();
 
-    GLboolean isFence();
+    GLboolean isFence() const;
     void setFence(GLenum condition);
     GLboolean testFence();
     void finishFence();
-    void getFenceiv(GLenum pname, GLint *params);
+    GLint getFencei(GLenum pname);
+
+    GLboolean getStatus() const { return mStatus; }
+    GLuint getCondition() const { return mCondition; }
 
   private:
-    DISALLOW_COPY_AND_ASSIGN(Fence);
+    DISALLOW_COPY_AND_ASSIGN(FenceNV);
 
     rx::FenceImpl *mFence;
+
+    GLboolean mStatus;
+    GLenum mCondition;
+};
+
+class FenceSync : public RefCountObject
+{
+  public:
+    explicit FenceSync(rx::Renderer *renderer, GLuint id);
+    virtual ~FenceSync();
+
+    void set(GLenum condition);
+    GLenum clientWait(GLbitfield flags, GLuint64 timeout);
+    void serverWait();
+    GLenum getStatus() const;
+
+    GLuint getCondition() const { return mCondition; }
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(FenceSync);
+
+    rx::FenceImpl *mFence;
+    LONGLONG mCounterFrequency;
+
+    GLenum mCondition;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Float16ToFloat32.cpp b/src/3rdparty/angle/src/libGLESv2/Float16ToFloat32.cpp
index b90d2f6023..5bf7b3fce8 100644
--- a/src/3rdparty/angle/src/libGLESv2/Float16ToFloat32.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Float16ToFloat32.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
diff --git a/src/3rdparty/angle/src/libGLESv2/Framebuffer.cpp b/src/3rdparty/angle/src/libGLESv2/Framebuffer.cpp
index b0abba0ac4..5b21433f90 100644
--- a/src/3rdparty/angle/src/libGLESv2/Framebuffer.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Framebuffer.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -9,255 +8,332 @@
 // objects and related functionality. [OpenGL ES 2.0.24] section 4.4 page 105.
 
 #include "libGLESv2/Framebuffer.h"
-
 #include "libGLESv2/main.h"
-#include "libGLESv2/utilities.h"
+#include "libGLESv2/formatutils.h"
 #include "libGLESv2/Texture.h"
 #include "libGLESv2/Context.h"
-#include "libGLESv2/renderer/Renderer.h"
 #include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
+
+#include "common/utilities.h"
+
+namespace rx
+{
+RenderTarget *GetAttachmentRenderTarget(gl::FramebufferAttachment *attachment)
+{
+    if (attachment->isTexture())
+    {
+        gl::Texture *texture = attachment->getTexture();
+        ASSERT(texture);
+        TextureD3D *textureD3D = TextureD3D::makeTextureD3D(texture->getImplementation());
+        const gl::ImageIndex *index = attachment->getTextureImageIndex();
+        ASSERT(index);
+        return textureD3D->getRenderTarget(*index);
+    }
+
+    gl::Renderbuffer *renderbuffer = attachment->getRenderbuffer();
+    ASSERT(renderbuffer);
+
+    // TODO: cast to RenderbufferD3D
+    return renderbuffer->getStorage()->getRenderTarget();
+}
+
+// Note: RenderTarget serials should ideally be in the RenderTargets themselves.
+unsigned int GetAttachmentSerial(gl::FramebufferAttachment *attachment)
+{
+    if (attachment->isTexture())
+    {
+        gl::Texture *texture = attachment->getTexture();
+        ASSERT(texture);
+        TextureD3D *textureD3D = TextureD3D::makeTextureD3D(texture->getImplementation());
+        const gl::ImageIndex *index = attachment->getTextureImageIndex();
+        ASSERT(index);
+        return textureD3D->getRenderTargetSerial(*index);
+    }
+
+    gl::Renderbuffer *renderbuffer = attachment->getRenderbuffer();
+    ASSERT(renderbuffer);
+
+    // TODO: cast to RenderbufferD3D
+    return renderbuffer->getStorage()->getSerial();
+}
+
+}
 
 namespace gl
 {
 
-Framebuffer::Framebuffer(rx::Renderer *renderer)
-    : mRenderer(renderer)
+Framebuffer::Framebuffer(rx::Renderer *renderer, GLuint id)
+    : mRenderer(renderer),
+      mId(id),
+      mReadBufferState(GL_COLOR_ATTACHMENT0_EXT),
+      mDepthbuffer(NULL),
+      mStencilbuffer(NULL)
 {
     for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
     {
-        mColorbufferTypes[colorAttachment] = GL_NONE;
+        mColorbuffers[colorAttachment] = NULL;
         mDrawBufferStates[colorAttachment] = GL_NONE;
     }
     mDrawBufferStates[0] = GL_COLOR_ATTACHMENT0_EXT;
-    mReadBufferState = GL_COLOR_ATTACHMENT0_EXT;
-
-    mDepthbufferType = GL_NONE;
-    mStencilbufferType = GL_NONE;
 }
 
 Framebuffer::~Framebuffer()
 {
     for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
     {
-        mColorbufferPointers[colorAttachment].set(NULL);
+        SafeDelete(mColorbuffers[colorAttachment]);
     }
-    mDepthbufferPointer.set(NULL);
-    mStencilbufferPointer.set(NULL);
+    SafeDelete(mDepthbuffer);
+    SafeDelete(mStencilbuffer);
 }
 
-Renderbuffer *Framebuffer::lookupRenderbuffer(GLenum type, GLuint handle) const
+FramebufferAttachment *Framebuffer::createAttachment(GLenum binding, GLenum type, GLuint handle, GLint level, GLint layer) const
 {
-    gl::Context *context = gl::getContext();
-    Renderbuffer *buffer = NULL;
-
-    if (type == GL_NONE)
-    {
-        buffer = NULL;
-    }
-    else if (type == GL_RENDERBUFFER)
-    {
-        buffer = context->getRenderbuffer(handle);
-    }
-    else if (IsInternalTextureTarget(type))
+    if (handle == 0)
     {
-        buffer = context->getTexture(handle)->getRenderbuffer(type);
+        return NULL;
     }
-    else
+
+    gl::Context *context = gl::getContext();
+
+    switch (type)
     {
+      case GL_NONE:
+        return NULL;
+
+      case GL_RENDERBUFFER:
+        return new RenderbufferAttachment(binding, context->getRenderbuffer(handle));
+
+      case GL_TEXTURE_2D:
+        {
+            Texture *texture = context->getTexture(handle);
+            if (texture && texture->getTarget() == GL_TEXTURE_2D)
+            {
+                return new TextureAttachment(binding, texture, ImageIndex::Make2D(level));
+            }
+            else
+            {
+                return NULL;
+            }
+        }
+
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+        {
+            Texture *texture = context->getTexture(handle);
+            if (texture && texture->getTarget() == GL_TEXTURE_CUBE_MAP)
+            {
+                return new TextureAttachment(binding, texture, ImageIndex::MakeCube(type, level));
+            }
+            else
+            {
+                return NULL;
+            }
+        }
+
+      case GL_TEXTURE_3D:
+        {
+            Texture *texture = context->getTexture(handle);
+            if (texture && texture->getTarget() == GL_TEXTURE_3D)
+            {
+                return new TextureAttachment(binding, texture, ImageIndex::Make3D(level, layer));
+            }
+            else
+            {
+                return NULL;
+            }
+        }
+
+      case GL_TEXTURE_2D_ARRAY:
+        {
+            Texture *texture = context->getTexture(handle);
+            if (texture && texture->getTarget() == GL_TEXTURE_2D_ARRAY)
+            {
+                return new TextureAttachment(binding, texture, ImageIndex::Make2DArray(level, layer));
+            }
+            else
+            {
+                return NULL;
+            }
+        }
+
+      default:
         UNREACHABLE();
+        return NULL;
     }
-
-    return buffer;
 }
 
-void Framebuffer::setColorbuffer(unsigned int colorAttachment, GLenum type, GLuint colorbuffer)
+void Framebuffer::setColorbuffer(unsigned int colorAttachment, GLenum type, GLuint colorbuffer, GLint level, GLint layer)
 {
     ASSERT(colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    mColorbufferTypes[colorAttachment] = (colorbuffer != 0) ? type : GL_NONE;
-    mColorbufferPointers[colorAttachment].set(lookupRenderbuffer(type, colorbuffer));
+    SafeDelete(mColorbuffers[colorAttachment]);
+    GLenum binding = colorAttachment + GL_COLOR_ATTACHMENT0;
+    mColorbuffers[colorAttachment] = createAttachment(binding, type, colorbuffer, level, layer);
 }
 
-void Framebuffer::setDepthbuffer(GLenum type, GLuint depthbuffer)
+void Framebuffer::setDepthbuffer(GLenum type, GLuint depthbuffer, GLint level, GLint layer)
 {
-    mDepthbufferType = (depthbuffer != 0) ? type : GL_NONE;
-    mDepthbufferPointer.set(lookupRenderbuffer(type, depthbuffer));
+    SafeDelete(mDepthbuffer);
+    mDepthbuffer = createAttachment(GL_DEPTH_ATTACHMENT, type, depthbuffer, level, layer);
 }
 
-void Framebuffer::setStencilbuffer(GLenum type, GLuint stencilbuffer)
+void Framebuffer::setStencilbuffer(GLenum type, GLuint stencilbuffer, GLint level, GLint layer)
 {
-    mStencilbufferType = (stencilbuffer != 0) ? type : GL_NONE;
-    mStencilbufferPointer.set(lookupRenderbuffer(type, stencilbuffer));
+    SafeDelete(mStencilbuffer);
+    mStencilbuffer = createAttachment(GL_STENCIL_ATTACHMENT, type, stencilbuffer, level, layer);
 }
 
-void Framebuffer::detachTexture(GLuint texture)
+void Framebuffer::setDepthStencilBuffer(GLenum type, GLuint depthStencilBuffer, GLint level, GLint layer)
 {
-    for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
-    {
-        if (mColorbufferPointers[colorAttachment].id() == texture && IsInternalTextureTarget(mColorbufferTypes[colorAttachment]))
-        {
-            mColorbufferTypes[colorAttachment] = GL_NONE;
-            mColorbufferPointers[colorAttachment].set(NULL);
-        }
-    }
+    FramebufferAttachment *attachment = createAttachment(GL_DEPTH_STENCIL_ATTACHMENT, type, depthStencilBuffer, level, layer);
 
-    if (mDepthbufferPointer.id() == texture && IsInternalTextureTarget(mDepthbufferType))
-    {
-        mDepthbufferType = GL_NONE;
-        mDepthbufferPointer.set(NULL);
-    }
+    SafeDelete(mDepthbuffer);
+    SafeDelete(mStencilbuffer);
 
-    if (mStencilbufferPointer.id() == texture && IsInternalTextureTarget(mStencilbufferType))
+    // ensure this is a legitimate depth+stencil format
+    if (attachment && attachment->getDepthSize() > 0 && attachment->getStencilSize() > 0)
     {
-        mStencilbufferType = GL_NONE;
-        mStencilbufferPointer.set(NULL);
+        mDepthbuffer = attachment;
+
+        // Make a new attachment object to ensure we do not double-delete
+        // See angle issue 686
+        mStencilbuffer = createAttachment(GL_DEPTH_STENCIL_ATTACHMENT, type, depthStencilBuffer, level, layer);
     }
 }
 
-void Framebuffer::detachRenderbuffer(GLuint renderbuffer)
+void Framebuffer::detachTexture(GLuint textureId)
 {
     for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
     {
-        if (mColorbufferPointers[colorAttachment].id() == renderbuffer && mColorbufferTypes[colorAttachment] == GL_RENDERBUFFER)
+        FramebufferAttachment *attachment = mColorbuffers[colorAttachment];
+
+        if (attachment && attachment->isTextureWithId(textureId))
         {
-            mColorbufferTypes[colorAttachment] = GL_NONE;
-            mColorbufferPointers[colorAttachment].set(NULL);
+            SafeDelete(mColorbuffers[colorAttachment]);
         }
     }
 
-    if (mDepthbufferPointer.id() == renderbuffer && mDepthbufferType == GL_RENDERBUFFER)
+    if (mDepthbuffer && mDepthbuffer->isTextureWithId(textureId))
     {
-        mDepthbufferType = GL_NONE;
-        mDepthbufferPointer.set(NULL);
+        SafeDelete(mDepthbuffer);
     }
 
-    if (mStencilbufferPointer.id() == renderbuffer && mStencilbufferType == GL_RENDERBUFFER)
+    if (mStencilbuffer && mStencilbuffer->isTextureWithId(textureId))
     {
-        mStencilbufferType = GL_NONE;
-        mStencilbufferPointer.set(NULL);
+        SafeDelete(mStencilbuffer);
     }
 }
 
-unsigned int Framebuffer::getRenderTargetSerial(unsigned int colorAttachment) const
+void Framebuffer::detachRenderbuffer(GLuint renderbufferId)
 {
-    ASSERT(colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS);
+    for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
+    {
+        FramebufferAttachment *attachment = mColorbuffers[colorAttachment];
 
-    Renderbuffer *colorbuffer = mColorbufferPointers[colorAttachment].get();
+        if (attachment && attachment->isRenderbufferWithId(renderbufferId))
+        {
+            SafeDelete(mColorbuffers[colorAttachment]);
+        }
+    }
 
-    if (colorbuffer)
+    if (mDepthbuffer && mDepthbuffer->isRenderbufferWithId(renderbufferId))
     {
-        return colorbuffer->getSerial();
+        SafeDelete(mDepthbuffer);
     }
 
-    return 0;
-}
-
-unsigned int Framebuffer::getDepthbufferSerial() const
-{
-    Renderbuffer *depthbuffer = mDepthbufferPointer.get();
-
-    if (depthbuffer)
+    if (mStencilbuffer && mStencilbuffer->isRenderbufferWithId(renderbufferId))
     {
-        return depthbuffer->getSerial();
+        SafeDelete(mStencilbuffer);
     }
-
-    return 0;
 }
 
-unsigned int Framebuffer::getStencilbufferSerial() const
+FramebufferAttachment *Framebuffer::getColorbuffer(unsigned int colorAttachment) const
 {
-    Renderbuffer *stencilbuffer = mStencilbufferPointer.get();
-
-    if (stencilbuffer)
-    {
-        return stencilbuffer->getSerial();
-    }
-
-    return 0;
+    ASSERT(colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS);
+    return mColorbuffers[colorAttachment];
 }
 
-Renderbuffer *Framebuffer::getColorbuffer(unsigned int colorAttachment) const
+FramebufferAttachment *Framebuffer::getDepthbuffer() const
 {
-    ASSERT(colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    return mColorbufferPointers[colorAttachment].get();
+    return mDepthbuffer;
 }
 
-Renderbuffer *Framebuffer::getDepthbuffer() const
+FramebufferAttachment *Framebuffer::getStencilbuffer() const
 {
-    return mDepthbufferPointer.get();
+    return mStencilbuffer;
 }
 
-Renderbuffer *Framebuffer::getStencilbuffer() const
+FramebufferAttachment *Framebuffer::getDepthStencilBuffer() const
 {
-    return mStencilbufferPointer.get();
+    return (hasValidDepthStencil() ? mDepthbuffer : NULL);
 }
 
-Renderbuffer *Framebuffer::getDepthOrStencilbuffer() const
+FramebufferAttachment *Framebuffer::getDepthOrStencilbuffer() const
 {
-    Renderbuffer *depthstencilbuffer = mDepthbufferPointer.get();
+    FramebufferAttachment *depthstencilbuffer = mDepthbuffer;
     
     if (!depthstencilbuffer)
     {
-        depthstencilbuffer = mStencilbufferPointer.get();
+        depthstencilbuffer = mStencilbuffer;
     }
 
     return depthstencilbuffer;
 }
 
-Renderbuffer *Framebuffer::getReadColorbuffer() const
+FramebufferAttachment *Framebuffer::getReadColorbuffer() const
 {
     // Will require more logic if glReadBuffers is supported
-    return mColorbufferPointers[0].get();
+    return mColorbuffers[0];
 }
 
 GLenum Framebuffer::getReadColorbufferType() const
 {
     // Will require more logic if glReadBuffers is supported
-    return mColorbufferTypes[0];
+    return (mColorbuffers[0] ? mColorbuffers[0]->type() : GL_NONE);
 }
 
-Renderbuffer *Framebuffer::getFirstColorbuffer() const
+FramebufferAttachment *Framebuffer::getFirstColorbuffer() const
 {
     for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
     {
-        if (mColorbufferTypes[colorAttachment] != GL_NONE)
+        if (mColorbuffers[colorAttachment])
         {
-            return mColorbufferPointers[colorAttachment].get();
+            return mColorbuffers[colorAttachment];
         }
     }
 
     return NULL;
 }
 
-GLenum Framebuffer::getColorbufferType(unsigned int colorAttachment) const
-{
-    ASSERT(colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    return mColorbufferTypes[colorAttachment];
-}
-
-GLenum Framebuffer::getDepthbufferType() const
-{
-    return mDepthbufferType;
-}
-
-GLenum Framebuffer::getStencilbufferType() const
-{
-    return mStencilbufferType;
-}
-
-GLuint Framebuffer::getColorbufferHandle(unsigned int colorAttachment) const
+FramebufferAttachment *Framebuffer::getAttachment(GLenum attachment) const
 {
-    ASSERT(colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    return mColorbufferPointers[colorAttachment].id();
-}
-
-GLuint Framebuffer::getDepthbufferHandle() const
-{
-    return mDepthbufferPointer.id();
-}
-
-GLuint Framebuffer::getStencilbufferHandle() const
-{
-    return mStencilbufferPointer.id();
+    if (attachment >= GL_COLOR_ATTACHMENT0 && attachment <= GL_COLOR_ATTACHMENT15)
+    {
+        return getColorbuffer(attachment - GL_COLOR_ATTACHMENT0);
+    }
+    else
+    {
+        switch (attachment)
+        {
+          case GL_DEPTH_ATTACHMENT:
+            return getDepthbuffer();
+          case GL_STENCIL_ATTACHMENT:
+            return getStencilbuffer();
+          case GL_DEPTH_STENCIL_ATTACHMENT:
+            return getDepthStencilBuffer();
+          default:
+            UNREACHABLE();
+            return NULL;
+        }
+    }
 }
 
 GLenum Framebuffer::getDrawBufferState(unsigned int colorAttachment) const
@@ -272,7 +348,7 @@ void Framebuffer::setDrawBufferState(unsigned int colorAttachment, GLenum drawBu
 
 bool Framebuffer::isEnabledColorAttachment(unsigned int colorAttachment) const
 {
-    return (mColorbufferTypes[colorAttachment] != GL_NONE && mDrawBufferStates[colorAttachment] != GL_NONE);
+    return (mColorbuffers[colorAttachment] && mDrawBufferStates[colorAttachment] != GL_NONE);
 }
 
 bool Framebuffer::hasEnabledColorAttachment() const
@@ -290,17 +366,7 @@ bool Framebuffer::hasEnabledColorAttachment() const
 
 bool Framebuffer::hasStencil() const
 {
-    if (mStencilbufferType != GL_NONE)
-    {
-        const Renderbuffer *stencilbufferObject = getStencilbuffer();
-
-        if (stencilbufferObject)
-        {
-            return stencilbufferObject->getStencilSize() > 0;
-        }
-    }
-
-    return false;
+    return (mStencilbuffer && mStencilbuffer->getStencilSize() > 0);
 }
 
 bool Framebuffer::usingExtendedDrawBuffers() const
@@ -320,63 +386,44 @@ GLenum Framebuffer::completeness() const
 {
     int width = 0;
     int height = 0;
-    int colorbufferSize = 0;
+    unsigned int colorbufferSize = 0;
     int samples = -1;
     bool missingAttachment = true;
+    GLuint clientVersion = mRenderer->getCurrentClientVersion();
 
     for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
     {
-        if (mColorbufferTypes[colorAttachment] != GL_NONE)
-        {
-            const Renderbuffer *colorbuffer = getColorbuffer(colorAttachment);
-
-            if (!colorbuffer)
-            {
-                return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
-            }
+        const FramebufferAttachment *colorbuffer = mColorbuffers[colorAttachment];
 
+        if (colorbuffer)
+        {
             if (colorbuffer->getWidth() == 0 || colorbuffer->getHeight() == 0)
             {
                 return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
             }
 
-            if (mColorbufferTypes[colorAttachment] == GL_RENDERBUFFER)
+            GLenum internalformat = colorbuffer->getInternalFormat();
+            // TODO(geofflang): use context's texture caps
+            const TextureCaps &formatCaps = mRenderer->getRendererTextureCaps().get(internalformat);
+            const InternalFormat &formatInfo = GetInternalFormatInfo(internalformat);
+            if (colorbuffer->isTexture())
             {
-                if (!gl::IsColorRenderable(colorbuffer->getInternalFormat()))
-                {
-                    return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
-                }
-            }
-            else if (IsInternalTextureTarget(mColorbufferTypes[colorAttachment]))
-            {
-                GLint internalformat = colorbuffer->getInternalFormat();
-                GLenum format = gl::ExtractFormat(internalformat);
-
-                if (IsCompressed(format) ||
-                    format == GL_ALPHA ||
-                    format == GL_LUMINANCE ||
-                    format == GL_LUMINANCE_ALPHA)
+                if (!formatCaps.renderable)
                 {
                     return GL_FRAMEBUFFER_UNSUPPORTED;
                 }
 
-                bool filtering, renderable;
-
-                if ((gl::IsFloat32Format(internalformat) && !mRenderer->getFloat32TextureSupport(&filtering, &renderable)) ||
-                    (gl::IsFloat16Format(internalformat) && !mRenderer->getFloat16TextureSupport(&filtering, &renderable)))
-                {
-                    return GL_FRAMEBUFFER_UNSUPPORTED;
-                }
-
-                if (gl::IsDepthTexture(internalformat) || gl::IsStencilTexture(internalformat))
+                if (formatInfo.depthBits > 0 || formatInfo.stencilBits > 0)
                 {
                     return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
                 }
             }
             else
             {
-                UNREACHABLE();
-                return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+                if (!formatCaps.renderable || formatInfo.depthBits > 0 || formatInfo.stencilBits > 0)
+                {
+                    return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+                }
             }
 
             if (!missingAttachment)
@@ -394,16 +441,24 @@ GLenum Framebuffer::completeness() const
                     return GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT;
                 }
 
-                // all color attachments attachments must have the same number of bitplanes
-                if (gl::ComputePixelSize(colorbuffer->getInternalFormat()) != colorbufferSize)
+                // in GLES 2.0, all color attachments attachments must have the same number of bitplanes
+                // in GLES 3.0, there is no such restriction
+                if (clientVersion < 3)
                 {
-                    return GL_FRAMEBUFFER_UNSUPPORTED;
+                    if (formatInfo.pixelBytes != colorbufferSize)
+                    {
+                        return GL_FRAMEBUFFER_UNSUPPORTED;
+                    }
                 }
 
                 // D3D11 does not allow for overlapping RenderTargetViews, so ensure uniqueness
                 for (unsigned int previousColorAttachment = 0; previousColorAttachment < colorAttachment; previousColorAttachment++)
                 {
-                    if (mColorbufferPointers[colorAttachment].get() == mColorbufferPointers[previousColorAttachment].get())
+                    const FramebufferAttachment *previousAttachment = mColorbuffers[previousColorAttachment];
+
+                    if (previousAttachment &&
+                        (colorbuffer->id() == previousAttachment->id() &&
+                         colorbuffer->type() == previousAttachment->type()))
                     {
                         return GL_FRAMEBUFFER_UNSUPPORTED;
                     }
@@ -414,129 +469,118 @@ GLenum Framebuffer::completeness() const
                 width = colorbuffer->getWidth();
                 height = colorbuffer->getHeight();
                 samples = colorbuffer->getSamples();
-                colorbufferSize = gl::ComputePixelSize(colorbuffer->getInternalFormat());
+                colorbufferSize = formatInfo.pixelBytes;
                 missingAttachment = false;
             }
         }
     }
 
-    const Renderbuffer *depthbuffer = NULL;
-    const Renderbuffer *stencilbuffer = NULL;
-
-    if (mDepthbufferType != GL_NONE)
+    if (mDepthbuffer)
     {
-        depthbuffer = getDepthbuffer();
-
-        if (!depthbuffer)
+        if (mDepthbuffer->getWidth() == 0 || mDepthbuffer->getHeight() == 0)
         {
             return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
         }
 
-        if (depthbuffer->getWidth() == 0 || depthbuffer->getHeight() == 0)
+        GLenum internalformat = mDepthbuffer->getInternalFormat();
+        // TODO(geofflang): use context's texture caps
+        const TextureCaps &formatCaps = mRenderer->getRendererTextureCaps().get(internalformat);
+        const InternalFormat &formatInfo = GetInternalFormatInfo(internalformat);
+        if (mDepthbuffer->isTexture())
         {
-            return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
-        }
-
-        if (mDepthbufferType == GL_RENDERBUFFER)
-        {
-            if (!gl::IsDepthRenderable(depthbuffer->getInternalFormat()))
+            // depth texture attachments require OES/ANGLE_depth_texture
+            // TODO(geofflang): use context's extensions
+            if (!mRenderer->getRendererExtensions().depthTextures)
             {
                 return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
             }
-        }
-        else if (IsInternalTextureTarget(mDepthbufferType))
-        {
-            GLint internalformat = depthbuffer->getInternalFormat();
 
-            // depth texture attachments require OES/ANGLE_depth_texture
-            if (!mRenderer->getDepthTextureSupport())
+            if (!formatCaps.renderable)
             {
-                return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+                return GL_FRAMEBUFFER_UNSUPPORTED;
             }
 
-            if (!gl::IsDepthTexture(internalformat))
+            if (formatInfo.depthBits == 0)
             {
                 return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
             }
         }
         else
         {
-            UNREACHABLE();
-            return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+            if (!formatCaps.renderable || formatInfo.depthBits == 0)
+            {
+                return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+            }
         }
 
         if (missingAttachment)
         {
-            width = depthbuffer->getWidth();
-            height = depthbuffer->getHeight();
-            samples = depthbuffer->getSamples();
+            width = mDepthbuffer->getWidth();
+            height = mDepthbuffer->getHeight();
+            samples = mDepthbuffer->getSamples();
             missingAttachment = false;
         }
-        else if (width != depthbuffer->getWidth() || height != depthbuffer->getHeight())
+        else if (width != mDepthbuffer->getWidth() || height != mDepthbuffer->getHeight())
         {
             return GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS;
         }
-        else if (samples != depthbuffer->getSamples())
+        else if (samples != mDepthbuffer->getSamples())
         {
             return GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_ANGLE;
         }
     }
 
-    if (mStencilbufferType != GL_NONE)
+    if (mStencilbuffer)
     {
-        stencilbuffer = getStencilbuffer();
-
-        if (!stencilbuffer)
-        {
-            return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
-        }
-
-        if (stencilbuffer->getWidth() == 0 || stencilbuffer->getHeight() == 0)
+        if (mStencilbuffer->getWidth() == 0 || mStencilbuffer->getHeight() == 0)
         {
             return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
         }
 
-        if (mStencilbufferType == GL_RENDERBUFFER)
+        GLenum internalformat = mStencilbuffer->getInternalFormat();
+        // TODO(geofflang): use context's texture caps
+        const TextureCaps &formatCaps = mRenderer->getRendererTextureCaps().get(internalformat);
+        const InternalFormat &formatInfo = GetInternalFormatInfo(internalformat);
+        if (mStencilbuffer->isTexture())
         {
-            if (!gl::IsStencilRenderable(stencilbuffer->getInternalFormat()))
+            // texture stencil attachments come along as part
+            // of OES_packed_depth_stencil + OES/ANGLE_depth_texture
+            // TODO(geofflang): use context's extensions
+            if (!mRenderer->getRendererExtensions().depthTextures)
             {
                 return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
             }
-        }
-        else if (IsInternalTextureTarget(mStencilbufferType))
-        {
-            GLint internalformat = stencilbuffer->getInternalFormat();
 
-            // texture stencil attachments come along as part
-            // of OES_packed_depth_stencil + OES/ANGLE_depth_texture
-            if (!mRenderer->getDepthTextureSupport())
+            if (!formatCaps.renderable)
             {
-                return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+                return GL_FRAMEBUFFER_UNSUPPORTED;
             }
 
-            if (!gl::IsStencilTexture(internalformat))
+            if (formatInfo.stencilBits == 0)
             {
                 return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
             }
         }
         else
         {
-            UNREACHABLE();
-            return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+            if (!formatCaps.renderable || formatInfo.stencilBits == 0)
+            {
+                return GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT;
+            }
         }
 
         if (missingAttachment)
         {
-            width = stencilbuffer->getWidth();
-            height = stencilbuffer->getHeight();
-            samples = stencilbuffer->getSamples();
+            width = mStencilbuffer->getWidth();
+            height = mStencilbuffer->getHeight();
+            samples = mStencilbuffer->getSamples();
             missingAttachment = false;
         }
-        else if (width != stencilbuffer->getWidth() || height != stencilbuffer->getHeight())
+        else if (width != mStencilbuffer->getWidth() || height != mStencilbuffer->getHeight())
         {
             return GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS;
         }
-        else if (samples != stencilbuffer->getSamples())
+        else if (samples != mStencilbuffer->getSamples())
         {
             return GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_ANGLE;
         }
@@ -544,7 +588,7 @@ GLenum Framebuffer::completeness() const
 
     // if we have both a depth and stencil buffer, they must refer to the same object
     // since we only support packed_depth_stencil and not separate depth and stencil
-    if (depthbuffer && stencilbuffer && (depthbuffer != stencilbuffer))
+    if (mDepthbuffer && mStencilbuffer && !hasValidDepthStencil())
     {
         return GL_FRAMEBUFFER_UNSUPPORTED;
     }
@@ -558,18 +602,47 @@ GLenum Framebuffer::completeness() const
     return GL_FRAMEBUFFER_COMPLETE;
 }
 
+void Framebuffer::invalidate(const Caps &caps, GLsizei numAttachments, const GLenum *attachments)
+{
+    GLuint maxDimension = caps.maxRenderbufferSize;
+    invalidateSub(caps, numAttachments, attachments, 0, 0, maxDimension, maxDimension);
+}
+
+void Framebuffer::invalidateSub(const Caps &caps, GLsizei numAttachments, const GLenum *attachments,
+                                GLint x, GLint y, GLsizei width, GLsizei height)
+{
+    ASSERT(completeness() == GL_FRAMEBUFFER_COMPLETE);
+    for (GLsizei attachIndex = 0; attachIndex < numAttachments; ++attachIndex)
+    {
+        GLenum attachmentTarget = attachments[attachIndex];
+
+        gl::FramebufferAttachment *attachment =
+            (attachmentTarget == GL_DEPTH_STENCIL_ATTACHMENT) ? getDepthOrStencilbuffer() :
+                                                                getAttachment(attachmentTarget);
+
+        if (attachment)
+        {
+            rx::RenderTarget *renderTarget = rx::GetAttachmentRenderTarget(attachment);
+            if (renderTarget)
+            {
+                renderTarget->invalidate(x, y, width, height);
+            }
+        }
+    }
+}
+
 DefaultFramebuffer::DefaultFramebuffer(rx::Renderer *renderer, Colorbuffer *colorbuffer, DepthStencilbuffer *depthStencil)
-    : Framebuffer(renderer)
+    : Framebuffer(renderer, 0)
 {
-    mColorbufferPointers[0].set(new Renderbuffer(mRenderer, 0, colorbuffer));
+    Renderbuffer *colorRenderbuffer = new Renderbuffer(0, colorbuffer);
+    mColorbuffers[0] = new RenderbufferAttachment(GL_BACK, colorRenderbuffer);
 
-    Renderbuffer *depthStencilRenderbuffer = new Renderbuffer(mRenderer, 0, depthStencil);
-    mDepthbufferPointer.set(depthStencilRenderbuffer);
-    mStencilbufferPointer.set(depthStencilRenderbuffer);
+    Renderbuffer *depthStencilBuffer = new Renderbuffer(0, depthStencil);
 
-    mColorbufferTypes[0] = GL_RENDERBUFFER;
-    mDepthbufferType = (depthStencilRenderbuffer->getDepthSize() != 0) ? GL_RENDERBUFFER : GL_NONE;
-    mStencilbufferType = (depthStencilRenderbuffer->getStencilSize() != 0) ? GL_RENDERBUFFER : GL_NONE;
+    // Make a new attachment objects to ensure we do not double-delete
+    // See angle issue 686
+    mDepthbuffer = (depthStencilBuffer->getDepthSize() != 0 ? new RenderbufferAttachment(GL_DEPTH_ATTACHMENT, depthStencilBuffer) : NULL);
+    mStencilbuffer = (depthStencilBuffer->getStencilSize() != 0 ? new RenderbufferAttachment(GL_STENCIL_ATTACHMENT, depthStencilBuffer) : NULL);
 
     mDrawBufferStates[0] = GL_BACK;
     mReadBufferState = GL_BACK;
@@ -583,9 +656,9 @@ int Framebuffer::getSamples() const
         // in this case return the first nonzero sample size
         for (unsigned int colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
         {
-            if (mColorbufferTypes[colorAttachment] != GL_NONE)
+            if (mColorbuffers[colorAttachment])
             {
-                return getColorbuffer(colorAttachment)->getSamples();
+                return mColorbuffers[colorAttachment]->getSamples();
             }
         }
     }
@@ -593,6 +666,40 @@ int Framebuffer::getSamples() const
     return 0;
 }
 
+bool Framebuffer::hasValidDepthStencil() const
+{
+    // A valid depth-stencil attachment has the same resource bound to both the
+    // depth and stencil attachment points.
+    return (mDepthbuffer && mStencilbuffer &&
+            mDepthbuffer->type() == mStencilbuffer->type() &&
+            mDepthbuffer->id() == mStencilbuffer->id());
+}
+
+ColorbufferInfo Framebuffer::getColorbuffersForRender() const
+{
+    ColorbufferInfo colorbuffersForRender;
+
+    for (size_t colorAttachment = 0; colorAttachment < IMPLEMENTATION_MAX_DRAW_BUFFERS; ++colorAttachment)
+    {
+        GLenum drawBufferState = mDrawBufferStates[colorAttachment];
+        FramebufferAttachment *colorbuffer = mColorbuffers[colorAttachment];
+
+        if (colorbuffer != NULL && drawBufferState != GL_NONE)
+        {
+            ASSERT(drawBufferState == GL_BACK || drawBufferState == (GL_COLOR_ATTACHMENT0_EXT + colorAttachment));
+            colorbuffersForRender.push_back(colorbuffer);
+        }
+#if (ANGLE_MRT_PERF_WORKAROUND == ANGLE_WORKAROUND_DISABLED)
+        else
+        {
+            colorbuffersForRender.push_back(NULL);
+        }
+#endif
+    }
+
+    return colorbuffersForRender;
+}
+
 GLenum DefaultFramebuffer::completeness() const
 {
     // The default framebuffer *must* always be complete, though it may not be
@@ -600,4 +707,23 @@ GLenum DefaultFramebuffer::completeness() const
     return GL_FRAMEBUFFER_COMPLETE;
 }
 
+FramebufferAttachment *DefaultFramebuffer::getAttachment(GLenum attachment) const
+{
+    switch (attachment)
+    {
+      case GL_COLOR:
+      case GL_BACK:
+        return getColorbuffer(0);
+      case GL_DEPTH:
+        return getDepthbuffer();
+      case GL_STENCIL:
+        return getStencilbuffer();
+      case GL_DEPTH_STENCIL:
+        return getDepthStencilBuffer();
+      default:
+        UNREACHABLE();
+        return NULL;
+    }
+}
+
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Framebuffer.h b/src/3rdparty/angle/src/libGLESv2/Framebuffer.h
index 50bfd4fd0f..cc12d22953 100644
--- a/src/3rdparty/angle/src/libGLESv2/Framebuffer.h
+++ b/src/3rdparty/angle/src/libGLESv2/Framebuffer.h
@@ -10,9 +10,11 @@
 #ifndef LIBGLESV2_FRAMEBUFFER_H_
 #define LIBGLESV2_FRAMEBUFFER_H_
 
+#include <vector>
+
 #include "common/angleutils.h"
 #include "common/RefCountObject.h"
-#include "Constants.h"
+#include "constants.h"
 
 namespace rx
 {
@@ -21,45 +23,42 @@ class Renderer;
 
 namespace gl
 {
-class Renderbuffer;
+class FramebufferAttachment;
 class Colorbuffer;
 class Depthbuffer;
 class Stencilbuffer;
 class DepthStencilbuffer;
+struct Caps;
+
+typedef std::vector<FramebufferAttachment *> ColorbufferInfo;
 
 class Framebuffer
 {
   public:
-    explicit Framebuffer(rx::Renderer *renderer);
+    Framebuffer(rx::Renderer *renderer, GLuint id);
 
     virtual ~Framebuffer();
 
-    void setColorbuffer(unsigned int colorAttachment, GLenum type, GLuint colorbuffer);
-    void setDepthbuffer(GLenum type, GLuint depthbuffer);
-    void setStencilbuffer(GLenum type, GLuint stencilbuffer);
+    GLuint id() const { return mId; }
+
+    void setColorbuffer(unsigned int colorAttachment, GLenum type, GLuint colorbuffer, GLint level, GLint layer);
+    void setDepthbuffer(GLenum type, GLuint depthbuffer, GLint level, GLint layer);
+    void setStencilbuffer(GLenum type, GLuint stencilbuffer, GLint level, GLint layer);
+    void setDepthStencilBuffer(GLenum type, GLuint depthStencilBuffer, GLint level, GLint layer);
 
     void detachTexture(GLuint texture);
     void detachRenderbuffer(GLuint renderbuffer);
 
-    unsigned int getRenderTargetSerial(unsigned int colorAttachment) const;
-    unsigned int getDepthbufferSerial() const;
-    unsigned int getStencilbufferSerial() const;
-
-    Renderbuffer *getColorbuffer(unsigned int colorAttachment) const;
-    Renderbuffer *getDepthbuffer() const;
-    Renderbuffer *getStencilbuffer() const;
-    Renderbuffer *getDepthOrStencilbuffer() const;
-    Renderbuffer *getReadColorbuffer() const;
+    FramebufferAttachment *getColorbuffer(unsigned int colorAttachment) const;
+    FramebufferAttachment *getDepthbuffer() const;
+    FramebufferAttachment *getStencilbuffer() const;
+    FramebufferAttachment *getDepthStencilBuffer() const;
+    FramebufferAttachment *getDepthOrStencilbuffer() const;
+    FramebufferAttachment *getReadColorbuffer() const;
     GLenum getReadColorbufferType() const;
-    Renderbuffer *getFirstColorbuffer() const;
-
-    GLenum getColorbufferType(unsigned int colorAttachment) const;
-    GLenum getDepthbufferType() const;
-    GLenum getStencilbufferType() const;
+    FramebufferAttachment *getFirstColorbuffer() const;
 
-    GLuint getColorbufferHandle(unsigned int colorAttachment) const;
-    GLuint getDepthbufferHandle() const;
-    GLuint getStencilbufferHandle() const;
+    virtual FramebufferAttachment *getAttachment(GLenum attachment) const;
 
     GLenum getDrawBufferState(unsigned int colorAttachment) const;
     void setDrawBufferState(unsigned int colorAttachment, GLenum drawBuffer);
@@ -71,25 +70,33 @@ class Framebuffer
     bool usingExtendedDrawBuffers() const;
 
     virtual GLenum completeness() const;
+    bool hasValidDepthStencil() const;
+
+    void invalidate(const Caps &caps, GLsizei numAttachments, const GLenum *attachments);
+    void invalidateSub(const Caps &caps, GLsizei numAttachments, const GLenum *attachments,
+                       GLint x, GLint y, GLsizei width, GLsizei height);
+
+    // Use this method to retrieve the color buffer map when doing rendering.
+    // It will apply a workaround for poor shader performance on some systems
+    // by compacting the list to skip NULL values.
+    ColorbufferInfo getColorbuffersForRender() const;
 
   protected:
-    GLenum mColorbufferTypes[IMPLEMENTATION_MAX_DRAW_BUFFERS];
-    BindingPointer<Renderbuffer> mColorbufferPointers[IMPLEMENTATION_MAX_DRAW_BUFFERS];
-    GLenum mDrawBufferStates[IMPLEMENTATION_MAX_DRAW_BUFFERS];
-    GLenum mReadBufferState;
+    rx::Renderer *mRenderer;
 
-    GLenum mDepthbufferType;
-    BindingPointer<Renderbuffer> mDepthbufferPointer;
+    GLuint mId;
 
-    GLenum mStencilbufferType;
-    BindingPointer<Renderbuffer> mStencilbufferPointer;
+    FramebufferAttachment *mColorbuffers[IMPLEMENTATION_MAX_DRAW_BUFFERS];
+    GLenum mDrawBufferStates[IMPLEMENTATION_MAX_DRAW_BUFFERS];
+    GLenum mReadBufferState;
 
-    rx::Renderer *mRenderer;
+    FramebufferAttachment *mDepthbuffer;
+    FramebufferAttachment *mStencilbuffer;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Framebuffer);
 
-    Renderbuffer *lookupRenderbuffer(GLenum type, GLuint handle) const;
+    FramebufferAttachment *createAttachment(GLenum binding, GLenum type, GLuint handle, GLint level, GLint layer) const;
 };
 
 class DefaultFramebuffer : public Framebuffer
@@ -98,6 +105,7 @@ class DefaultFramebuffer : public Framebuffer
     DefaultFramebuffer(rx::Renderer *Renderer, Colorbuffer *colorbuffer, DepthStencilbuffer *depthStencil);
 
     virtual GLenum completeness() const;
+    virtual FramebufferAttachment *getAttachment(GLenum attachment) const;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(DefaultFramebuffer);
@@ -105,4 +113,14 @@ class DefaultFramebuffer : public Framebuffer
 
 }
 
+namespace rx
+{
+class RenderTarget;
+
+// TODO: place this in FramebufferD3D.h
+RenderTarget *GetAttachmentRenderTarget(gl::FramebufferAttachment *attachment);
+unsigned int GetAttachmentSerial(gl::FramebufferAttachment *attachment);
+
+}
+
 #endif   // LIBGLESV2_FRAMEBUFFER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/FramebufferAttachment.cpp b/src/3rdparty/angle/src/libGLESv2/FramebufferAttachment.cpp
new file mode 100644
index 0000000000..540ede1cd2
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/FramebufferAttachment.cpp
@@ -0,0 +1,230 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// FramebufferAttachment.cpp: the gl::FramebufferAttachment class and its derived classes
+// objects and related functionality. [OpenGL ES 2.0.24] section 4.4.3 page 108.
+
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/d3d/TextureStorage.h"
+
+#include "common/utilities.h"
+
+namespace gl
+{
+
+////// FramebufferAttachment Implementation //////
+
+FramebufferAttachment::FramebufferAttachment(GLenum binding)
+    : mBinding(binding)
+{
+}
+
+FramebufferAttachment::~FramebufferAttachment()
+{
+}
+
+GLuint FramebufferAttachment::getRedSize() const
+{
+    return (GetInternalFormatInfo(getInternalFormat()).redBits > 0) ? GetInternalFormatInfo(getActualFormat()).redBits : 0;
+}
+
+GLuint FramebufferAttachment::getGreenSize() const
+{
+    return (GetInternalFormatInfo(getInternalFormat()).greenBits > 0) ? GetInternalFormatInfo(getActualFormat()).greenBits : 0;
+}
+
+GLuint FramebufferAttachment::getBlueSize() const
+{
+    return (GetInternalFormatInfo(getInternalFormat()).blueBits > 0) ? GetInternalFormatInfo(getActualFormat()).blueBits : 0;
+}
+
+GLuint FramebufferAttachment::getAlphaSize() const
+{
+    return (GetInternalFormatInfo(getInternalFormat()).alphaBits > 0) ? GetInternalFormatInfo(getActualFormat()).alphaBits : 0;
+}
+
+GLuint FramebufferAttachment::getDepthSize() const
+{
+    return (GetInternalFormatInfo(getInternalFormat()).depthBits > 0) ? GetInternalFormatInfo(getActualFormat()).depthBits : 0;
+}
+
+GLuint FramebufferAttachment::getStencilSize() const
+{
+    return (GetInternalFormatInfo(getInternalFormat()).stencilBits > 0) ? GetInternalFormatInfo(getActualFormat()).stencilBits : 0;
+}
+
+GLenum FramebufferAttachment::getComponentType() const
+{
+    return GetInternalFormatInfo(getActualFormat()).componentType;
+}
+
+GLenum FramebufferAttachment::getColorEncoding() const
+{
+    return GetInternalFormatInfo(getActualFormat()).colorEncoding;
+}
+
+bool FramebufferAttachment::isTexture() const
+{
+    return (type() != GL_RENDERBUFFER);
+}
+
+///// TextureAttachment Implementation ////////
+
+TextureAttachment::TextureAttachment(GLenum binding, Texture *texture, const ImageIndex &index)
+    : FramebufferAttachment(binding),
+      mIndex(index)
+{
+    mTexture.set(texture);
+}
+
+TextureAttachment::~TextureAttachment()
+{
+    mTexture.set(NULL);
+}
+
+GLsizei TextureAttachment::getSamples() const
+{
+    return 0;
+}
+
+GLuint TextureAttachment::id() const
+{
+    return mTexture->id();
+}
+
+GLsizei TextureAttachment::getWidth() const
+{
+    return mTexture->getWidth(mIndex);
+}
+
+GLsizei TextureAttachment::getHeight() const
+{
+    return mTexture->getHeight(mIndex);
+}
+
+GLenum TextureAttachment::getInternalFormat() const
+{
+    return mTexture->getInternalFormat(mIndex);
+}
+
+GLenum TextureAttachment::getActualFormat() const
+{
+    return mTexture->getActualFormat(mIndex);
+}
+
+GLenum TextureAttachment::type() const
+{
+    return mIndex.type;
+}
+
+GLint TextureAttachment::mipLevel() const
+{
+    return mIndex.mipIndex;
+}
+
+GLint TextureAttachment::layer() const
+{
+    return mIndex.layerIndex;
+}
+
+Texture *TextureAttachment::getTexture()
+{
+    return mTexture.get();
+}
+
+const ImageIndex *TextureAttachment::getTextureImageIndex() const
+{
+    return &mIndex;
+}
+
+Renderbuffer *TextureAttachment::getRenderbuffer()
+{
+    UNREACHABLE();
+    return NULL;
+}
+
+////// RenderbufferAttachment Implementation //////
+
+RenderbufferAttachment::RenderbufferAttachment(GLenum binding, Renderbuffer *renderbuffer)
+    : FramebufferAttachment(binding)
+{
+    ASSERT(renderbuffer);
+    mRenderbuffer.set(renderbuffer);
+}
+
+RenderbufferAttachment::~RenderbufferAttachment()
+{
+    mRenderbuffer.set(NULL);
+}
+
+GLsizei RenderbufferAttachment::getWidth() const
+{
+    return mRenderbuffer->getWidth();
+}
+
+GLsizei RenderbufferAttachment::getHeight() const
+{
+    return mRenderbuffer->getHeight();
+}
+
+GLenum RenderbufferAttachment::getInternalFormat() const
+{
+    return mRenderbuffer->getInternalFormat();
+}
+
+GLenum RenderbufferAttachment::getActualFormat() const
+{
+    return mRenderbuffer->getActualFormat();
+}
+
+GLsizei RenderbufferAttachment::getSamples() const
+{
+    return mRenderbuffer->getStorage()->getSamples();
+}
+
+GLuint RenderbufferAttachment::id() const
+{
+    return mRenderbuffer->id();
+}
+
+GLenum RenderbufferAttachment::type() const
+{
+    return GL_RENDERBUFFER;
+}
+
+GLint RenderbufferAttachment::mipLevel() const
+{
+    return 0;
+}
+
+GLint RenderbufferAttachment::layer() const
+{
+    return 0;
+}
+
+Texture *RenderbufferAttachment::getTexture()
+{
+    UNREACHABLE();
+    return NULL;
+}
+
+const ImageIndex *RenderbufferAttachment::getTextureImageIndex() const
+{
+    UNREACHABLE();
+    return NULL;
+}
+
+Renderbuffer *RenderbufferAttachment::getRenderbuffer()
+{
+    return mRenderbuffer.get();
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/FramebufferAttachment.h b/src/3rdparty/angle/src/libGLESv2/FramebufferAttachment.h
new file mode 100644
index 0000000000..c18ef7364d
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/FramebufferAttachment.h
@@ -0,0 +1,139 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// FramebufferAttachment.h: Defines the wrapper class gl::FramebufferAttachment, as well as the
+// objects and related functionality. [OpenGL ES 2.0.24] section 4.4.3 page 108.
+
+#ifndef LIBGLESV2_FRAMEBUFFERATTACHMENT_H_
+#define LIBGLESV2_FRAMEBUFFERATTACHMENT_H_
+
+#include "common/angleutils.h"
+#include "common/RefCountObject.h"
+#include "Texture.h"
+
+#include "angle_gl.h"
+
+namespace rx
+{
+class Renderer;
+class RenderTarget;
+class TextureStorage;
+}
+
+namespace gl
+{
+class Renderbuffer;
+
+// FramebufferAttachment implements a GL framebuffer attachment.
+// Attachments are "light" containers, which store pointers to ref-counted GL objects.
+// We support GL texture (2D/3D/Cube/2D array) and renderbuffer object attachments.
+// Note: Our old naming scheme used the term "Renderbuffer" for both GL renderbuffers and for
+// framebuffer attachments, which confused their usage.
+
+class FramebufferAttachment
+{
+  public:
+    explicit FramebufferAttachment(GLenum binding);
+    virtual ~FramebufferAttachment();
+
+    // Helper methods
+    GLuint getRedSize() const;
+    GLuint getGreenSize() const;
+    GLuint getBlueSize() const;
+    GLuint getAlphaSize() const;
+    GLuint getDepthSize() const;
+    GLuint getStencilSize() const;
+    GLenum getComponentType() const;
+    GLenum getColorEncoding() const;
+    bool isTexture() const;
+
+    bool isTextureWithId(GLuint textureId) const { return isTexture() && id() == textureId; }
+    bool isRenderbufferWithId(GLuint renderbufferId) const { return !isTexture() && id() == renderbufferId; }
+
+    GLenum getBinding() const { return mBinding; }
+
+    // Child class interface
+    virtual GLsizei getWidth() const = 0;
+    virtual GLsizei getHeight() const = 0;
+    virtual GLenum getInternalFormat() const = 0;
+    virtual GLenum getActualFormat() const = 0;
+    virtual GLsizei getSamples() const = 0;
+
+    virtual GLuint id() const = 0;
+    virtual GLenum type() const = 0;
+    virtual GLint mipLevel() const = 0;
+    virtual GLint layer() const = 0;
+
+    virtual Texture *getTexture() = 0;
+    virtual const ImageIndex *getTextureImageIndex() const = 0;
+    virtual Renderbuffer *getRenderbuffer() = 0;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(FramebufferAttachment);
+
+    GLenum mBinding;
+};
+
+class TextureAttachment : public FramebufferAttachment
+{
+  public:
+    TextureAttachment(GLenum binding, Texture *texture, const ImageIndex &index);
+    virtual ~TextureAttachment();
+
+    virtual GLsizei getSamples() const;
+    virtual GLuint id() const;
+
+    virtual GLsizei getWidth() const;
+    virtual GLsizei getHeight() const;
+    virtual GLenum getInternalFormat() const;
+    virtual GLenum getActualFormat() const;
+
+    virtual GLenum type() const;
+    virtual GLint mipLevel() const;
+    virtual GLint layer() const;
+
+    virtual Texture *getTexture();
+    virtual const ImageIndex *getTextureImageIndex() const;
+    virtual Renderbuffer *getRenderbuffer();
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureAttachment);
+
+    BindingPointer<Texture> mTexture;
+    ImageIndex mIndex;
+};
+
+class RenderbufferAttachment : public FramebufferAttachment
+{
+  public:
+    RenderbufferAttachment(GLenum binding, Renderbuffer *renderbuffer);
+
+    virtual ~RenderbufferAttachment();
+
+    virtual GLsizei getWidth() const;
+    virtual GLsizei getHeight() const;
+    virtual GLenum getInternalFormat() const;
+    virtual GLenum getActualFormat() const;
+    virtual GLsizei getSamples() const;
+
+    virtual GLuint id() const;
+    virtual GLenum type() const;
+    virtual GLint mipLevel() const;
+    virtual GLint layer() const;
+
+    virtual Texture *getTexture();
+    virtual const ImageIndex *getTextureImageIndex() const;
+    virtual Renderbuffer *getRenderbuffer();
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(RenderbufferAttachment);
+
+    BindingPointer<Renderbuffer> mRenderbuffer;
+};
+
+}
+
+#endif // LIBGLESV2_FRAMEBUFFERATTACHMENT_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/HandleAllocator.cpp b/src/3rdparty/angle/src/libGLESv2/HandleAllocator.cpp
index 37da99aa18..c498f8a178 100644
--- a/src/3rdparty/angle/src/libGLESv2/HandleAllocator.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/HandleAllocator.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2011 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
diff --git a/src/3rdparty/angle/src/libGLESv2/HandleAllocator.h b/src/3rdparty/angle/src/libGLESv2/HandleAllocator.h
index a92e1684d4..a89cc86775 100644
--- a/src/3rdparty/angle/src/libGLESv2/HandleAllocator.h
+++ b/src/3rdparty/angle/src/libGLESv2/HandleAllocator.h
@@ -10,12 +10,11 @@
 #ifndef LIBGLESV2_HANDLEALLOCATOR_H_
 #define LIBGLESV2_HANDLEALLOCATOR_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
+#include "common/angleutils.h"
 
-#include <vector>
+#include "angle_gl.h"
 
-#include "common/angleutils.h"
+#include <vector>
 
 namespace gl
 {
diff --git a/src/3rdparty/angle/src/libGLESv2/ImageIndex.cpp b/src/3rdparty/angle/src/libGLESv2/ImageIndex.cpp
new file mode 100644
index 0000000000..3522b997e8
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/ImageIndex.cpp
@@ -0,0 +1,57 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ImageIndex.cpp: Implementation for ImageIndex methods.
+
+#include "libGLESv2/ImageIndex.h"
+#include "libGLESv2/Texture.h"
+#include "common/utilities.h"
+
+namespace gl
+{
+
+ImageIndex::ImageIndex(const ImageIndex &other)
+    : type(other.type),
+      mipIndex(other.mipIndex),
+      layerIndex(other.layerIndex)
+{}
+
+ImageIndex &ImageIndex::operator=(const ImageIndex &other)
+{
+    type = other.type;
+    mipIndex = other.mipIndex;
+    layerIndex = other.layerIndex;
+    return *this;
+}
+
+ImageIndex ImageIndex::Make2D(GLint mipIndex)
+{
+    return ImageIndex(GL_TEXTURE_2D, mipIndex, ENTIRE_LEVEL);
+}
+
+ImageIndex ImageIndex::MakeCube(GLenum target, GLint mipIndex)
+{
+    ASSERT(gl::IsCubemapTextureTarget(target));
+    return ImageIndex(target, mipIndex, TextureCubeMap::targetToLayerIndex(target));
+}
+
+ImageIndex ImageIndex::Make2DArray(GLint mipIndex, GLint layerIndex)
+{
+    return ImageIndex(GL_TEXTURE_2D_ARRAY, mipIndex, layerIndex);
+}
+
+ImageIndex ImageIndex::Make3D(GLint mipIndex, GLint layerIndex)
+{
+    return ImageIndex(GL_TEXTURE_3D, mipIndex, layerIndex);
+}
+
+ImageIndex::ImageIndex(GLenum typeIn, GLint mipIndexIn, GLint layerIndexIn)
+    : type(typeIn),
+      mipIndex(mipIndexIn),
+      layerIndex(layerIndexIn)
+{}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/ImageIndex.h b/src/3rdparty/angle/src/libGLESv2/ImageIndex.h
new file mode 100644
index 0000000000..9f2df88061
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/ImageIndex.h
@@ -0,0 +1,41 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ImageIndex.h: A helper struct for indexing into an Image array
+
+#ifndef LIBGLESV2_IMAGE_INDEX_H_
+#define LIBGLESV2_IMAGE_INDEX_H_
+
+#include "angle_gl.h"
+
+namespace gl
+{
+
+struct ImageIndex
+{
+    GLenum type;
+    GLint mipIndex;
+    GLint layerIndex;
+
+    ImageIndex(const ImageIndex &other);
+    ImageIndex &operator=(const ImageIndex &other);
+
+    bool hasLayer() const { return layerIndex != ENTIRE_LEVEL; }
+
+    static ImageIndex Make2D(GLint mipIndex);
+    static ImageIndex MakeCube(GLenum target, GLint mipIndex);
+    static ImageIndex Make2DArray(GLint mipIndex, GLint layerIndex);
+    static ImageIndex Make3D(GLint mipIndex, GLint layerIndex = ENTIRE_LEVEL);
+
+    static const GLint ENTIRE_LEVEL = static_cast<GLint>(-1);
+
+  private:
+    ImageIndex(GLenum typeIn, GLint mipIndexIn, GLint layerIndexIn);
+};
+
+}
+
+#endif // LIBGLESV2_IMAGE_INDEX_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/Program.cpp b/src/3rdparty/angle/src/libGLESv2/Program.cpp
index c38aa5a61a..9bfda09a64 100644
--- a/src/3rdparty/angle/src/libGLESv2/Program.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Program.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,6 +10,7 @@
 #include "libGLESv2/Program.h"
 #include "libGLESv2/ProgramBinary.h"
 #include "libGLESv2/ResourceManager.h"
+#include "libGLESv2/renderer/Renderer.h"
 
 namespace gl
 {
@@ -95,32 +95,36 @@ void InfoLog::append(const char *format, ...)
         return;
     }
 
-    char info[1024];
-
     va_list vararg;
     va_start(vararg, format);
-    vsnprintf(info, sizeof(info), format, vararg);
+    size_t infoLength = vsnprintf(NULL, 0, format, vararg);
     va_end(vararg);
 
-    size_t infoLength = strlen(info);
+    char *logPointer = NULL;
 
     if (!mInfoLog)
     {
         mInfoLog = new char[infoLength + 2];
-        strcpy(mInfoLog, info);
-        strcpy(mInfoLog + infoLength, "\n");
+        logPointer = mInfoLog;
     }
     else
     {
-        size_t logLength = strlen(mInfoLog);
-        char *newLog = new char[logLength + infoLength + 2];
+        size_t currentlogLength = strlen(mInfoLog);
+        char *newLog = new char[currentlogLength + infoLength + 2];
         strcpy(newLog, mInfoLog);
-        strcpy(newLog + logLength, info);
-        strcpy(newLog + logLength + infoLength, "\n");
 
         delete[] mInfoLog;
         mInfoLog = newLog;
+
+        logPointer = mInfoLog + currentlogLength;
     }
+
+    va_start(vararg, format);
+    vsnprintf(logPointer, infoLength, format, vararg);
+    va_end(vararg);
+
+    logPointer[infoLength] = 0;
+    strcpy(logPointer + infoLength, "\n");
 }
 
 void InfoLog::reset()
@@ -141,6 +145,8 @@ Program::Program(rx::Renderer *renderer, ResourceManager *manager, GLuint handle
     mLinked = false;
     mRefCount = 0;
     mRenderer = renderer;
+
+    resetUniformBlockBindings();
 }
 
 Program::~Program()
@@ -167,7 +173,7 @@ bool Program::attachShader(Shader *shader)
             return false;
         }
 
-        mVertexShader = (VertexShader*)shader;
+        mVertexShader = shader;
         mVertexShader->addRef();
     }
     else if (shader->getType() == GL_FRAGMENT_SHADER)
@@ -177,7 +183,7 @@ bool Program::attachShader(Shader *shader)
             return false;
         }
 
-        mFragmentShader = (FragmentShader*)shader;
+        mFragmentShader = shader;
         mFragmentShader->addRef();
     }
     else UNREACHABLE();
@@ -238,14 +244,16 @@ void Program::bindAttributeLocation(GLuint index, const char *name)
 // Links the HLSL code of the vertex and pixel shader by matching up their varyings,
 // compiling them into binaries, determining the attribute mappings, and collecting
 // a list of uniforms
-bool Program::link()
+bool Program::link(const Caps &caps)
 {
     unlink(false);
 
     mInfoLog.reset();
+    resetUniformBlockBindings();
 
-    mProgramBinary.set(new ProgramBinary(mRenderer));
-    mLinked = mProgramBinary->link(mInfoLog, mAttributeBindings, mFragmentShader, mVertexShader);
+    mProgramBinary.set(new ProgramBinary(mRenderer->createProgram()));
+    mLinked = mProgramBinary->link(mInfoLog, mAttributeBindings, mFragmentShader, mVertexShader,
+                                   mTransformFeedbackVaryings, mTransformFeedbackBufferMode, caps);
 
     return mLinked;
 }
@@ -290,19 +298,20 @@ bool Program::isLinked()
     return mLinked;
 }
 
-ProgramBinary* Program::getProgramBinary()
+ProgramBinary* Program::getProgramBinary() const
 {
     return mProgramBinary.get();
 }
 
-bool Program::setProgramBinary(const void *binary, GLsizei length)
+bool Program::setProgramBinary(GLenum binaryFormat, const void *binary, GLsizei length)
 {
     unlink(false);
 
     mInfoLog.reset();
 
-    mProgramBinary.set(new ProgramBinary(mRenderer));
-    mLinked = mProgramBinary->load(mInfoLog, binary, length);
+    mProgramBinary.set(new ProgramBinary(mRenderer->createProgram()));
+    mLinked = mProgramBinary->load(mInfoLog, binaryFormat, binary, length);
+
     if (!mLinked)
     {
         mProgramBinary.set(NULL);
@@ -494,14 +503,14 @@ bool Program::isFlaggedForDeletion() const
     return mDeleteStatus;
 }
 
-void Program::validate()
+void Program::validate(const Caps &caps)
 {
     mInfoLog.reset();
 
     ProgramBinary *programBinary = getProgramBinary();
     if (isLinked() && programBinary)
     {
-        programBinary->validate(mInfoLog);
+        programBinary->validate(mInfoLog, caps);
     }
     else
     {
@@ -522,4 +531,132 @@ bool Program::isValidated() const
     }
 }
 
+GLint Program::getActiveUniformBlockCount()
+{
+    ProgramBinary *programBinary = getProgramBinary();
+    if (programBinary)
+    {
+        return static_cast<GLint>(programBinary->getActiveUniformBlockCount());
+    }
+    else
+    {
+        return 0;
+    }
+}
+
+GLint Program::getActiveUniformBlockMaxLength()
+{
+    ProgramBinary *programBinary = getProgramBinary();
+    if (programBinary)
+    {
+        return static_cast<GLint>(programBinary->getActiveUniformBlockMaxLength());
+    }
+    else
+    {
+        return 0;
+    }
+}
+
+void Program::bindUniformBlock(GLuint uniformBlockIndex, GLuint uniformBlockBinding)
+{
+    mUniformBlockBindings[uniformBlockIndex] = uniformBlockBinding;
+}
+
+GLuint Program::getUniformBlockBinding(GLuint uniformBlockIndex) const
+{
+    return mUniformBlockBindings[uniformBlockIndex];
+}
+
+void Program::resetUniformBlockBindings()
+{
+    for (unsigned int blockId = 0; blockId < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS; blockId++)
+    {
+        mUniformBlockBindings[blockId] = 0;
+    }
+}
+
+void Program::setTransformFeedbackVaryings(GLsizei count, const GLchar *const *varyings, GLenum bufferMode)
+{
+    mTransformFeedbackVaryings.resize(count);
+    for (GLsizei i = 0; i < count; i++)
+    {
+        mTransformFeedbackVaryings[i] = varyings[i];
+    }
+
+    mTransformFeedbackBufferMode = bufferMode;
+}
+
+void Program::getTransformFeedbackVarying(GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name) const
+{
+    ProgramBinary *programBinary = getProgramBinary();
+    if (programBinary && index < programBinary->getTransformFeedbackVaryingCount())
+    {
+        const LinkedVarying &varying = programBinary->getTransformFeedbackVarying(index);
+        GLsizei lastNameIdx = std::min(bufSize - 1, static_cast<GLsizei>(varying.name.length()));
+        if (length)
+        {
+            *length = lastNameIdx;
+        }
+        if (size)
+        {
+            *size = varying.size;
+        }
+        if (type)
+        {
+            *type = varying.type;
+        }
+        if (name)
+        {
+            memcpy(name, varying.name.c_str(), lastNameIdx);
+            name[lastNameIdx] = '\0';
+        }
+    }
+}
+
+GLsizei Program::getTransformFeedbackVaryingCount() const
+{
+    ProgramBinary *programBinary = getProgramBinary();
+    if (programBinary)
+    {
+        return static_cast<GLsizei>(programBinary->getTransformFeedbackVaryingCount());
+    }
+    else
+    {
+        return 0;
+    }
+}
+
+GLsizei Program::getTransformFeedbackVaryingMaxLength() const
+{
+    ProgramBinary *programBinary = getProgramBinary();
+    if (programBinary)
+    {
+        GLsizei maxSize = 0;
+        for (size_t i = 0; i < programBinary->getTransformFeedbackVaryingCount(); i++)
+        {
+            const LinkedVarying &varying = programBinary->getTransformFeedbackVarying(i);
+            maxSize = std::max(maxSize, static_cast<GLsizei>(varying.name.length() + 1));
+        }
+
+        return maxSize;
+    }
+    else
+    {
+        return 0;
+    }
+}
+
+GLenum Program::getTransformFeedbackBufferMode() const
+{
+    ProgramBinary *programBinary = getProgramBinary();
+    if (programBinary)
+    {
+        return programBinary->getTransformFeedbackBufferMode();
+    }
+    else
+    {
+        return mTransformFeedbackBufferMode;
+    }
+}
+
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Program.h b/src/3rdparty/angle/src/libGLESv2/Program.h
index a9db83403d..6528dd1191 100644
--- a/src/3rdparty/angle/src/libGLESv2/Program.h
+++ b/src/3rdparty/angle/src/libGLESv2/Program.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,12 +10,16 @@
 #ifndef LIBGLESV2_PROGRAM_H_
 #define LIBGLESV2_PROGRAM_H_
 
-#include <string>
-#include <set>
-
 #include "common/angleutils.h"
 #include "common/RefCountObject.h"
 #include "libGLESv2/Constants.h"
+#include "libGLESv2/ProgramBinary.h"
+
+#include <GLES2/gl2.h>
+
+#include <vector>
+#include <string>
+#include <set>
 
 namespace rx
 {
@@ -24,10 +28,8 @@ class Renderer;
 
 namespace gl
 {
+struct Caps;
 class ResourceManager;
-class FragmentShader;
-class VertexShader;
-class ProgramBinary;
 class Shader;
 
 extern const char * const g_fakepath;
@@ -75,10 +77,10 @@ class Program
 
     void bindAttributeLocation(GLuint index, const char *name);
 
-    bool link();
+    bool link(const Caps &caps);
     bool isLinked();
-    bool setProgramBinary(const void *binary, GLsizei length);
-    ProgramBinary *getProgramBinary();
+    bool setProgramBinary(GLenum binaryFormat, const void *binary, GLsizei length);
+    ProgramBinary *getProgramBinary() const;
 
     int getInfoLogLength() const;
     void getInfoLog(GLsizei bufSize, GLsizei *length, char *infoLog);
@@ -92,13 +94,25 @@ class Program
     GLint getActiveUniformCount();
     GLint getActiveUniformMaxLength();
 
+    GLint getActiveUniformBlockCount();
+    GLint getActiveUniformBlockMaxLength();
+
+    void bindUniformBlock(GLuint uniformBlockIndex, GLuint uniformBlockBinding);
+    GLuint getUniformBlockBinding(GLuint uniformBlockIndex) const;
+
+    void setTransformFeedbackVaryings(GLsizei count, const GLchar *const *varyings, GLenum bufferMode);
+    void getTransformFeedbackVarying(GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name) const;
+    GLsizei getTransformFeedbackVaryingCount() const;
+    GLsizei getTransformFeedbackVaryingMaxLength() const;
+    GLenum getTransformFeedbackBufferMode() const;
+
     void addRef();
     void release();
     unsigned int getRefCount() const;
     void flagForDeletion();
     bool isFlaggedForDeletion() const;
 
-    void validate();
+    void validate(const Caps &caps);
     bool isValidated() const;
 
     GLint getProgramBinaryLength() const;
@@ -107,12 +121,18 @@ class Program
     DISALLOW_COPY_AND_ASSIGN(Program);
 
     void unlink(bool destroy = false);
+    void resetUniformBlockBindings();
 
-    FragmentShader *mFragmentShader;
-    VertexShader *mVertexShader;
+    Shader *mFragmentShader;
+    Shader *mVertexShader;
 
     AttributeBindings mAttributeBindings;
 
+    GLuint mUniformBlockBindings[IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS];
+
+    std::vector<std::string> mTransformFeedbackVaryings;
+    GLuint mTransformFeedbackBufferMode;
+
     BindingPointer<ProgramBinary> mProgramBinary;
     bool mLinked;
     bool mDeleteStatus;   // Flag to indicate that the program can be deleted when no longer in use
diff --git a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
index 13c515a594..3f6d9e0ef9 100644
--- a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,109 +9,310 @@
 
 #include "libGLESv2/BinaryStream.h"
 #include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/Renderbuffer.h"
 #include "libGLESv2/renderer/ShaderExecutable.h"
 
 #include "common/debug.h"
 #include "common/version.h"
-#include "utilities.h"
+#include "common/utilities.h"
+#include "common/platform.h"
 
 #include "libGLESv2/main.h"
 #include "libGLESv2/Shader.h"
 #include "libGLESv2/Program.h"
+#include "libGLESv2/renderer/ProgramImpl.h"
 #include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/renderer/VertexDataManager.h"
-
-#undef near
-#undef far
+#include "libGLESv2/renderer/d3d/DynamicHLSL.h"
+#include "libGLESv2/renderer/d3d/ShaderD3D.h"
+#include "libGLESv2/renderer/d3d/VertexDataManager.h"
+#include "libGLESv2/Context.h"
+#include "libGLESv2/Buffer.h"
+#include "common/blocklayout.h"
 
 namespace gl
 {
-std::string str(int i)
+
+namespace
 {
-    char buffer[20];
-    snprintf(buffer, sizeof(buffer), "%d", i);
-    return buffer;
+
+GLenum GetTextureType(GLenum samplerType)
+{
+    switch (samplerType)
+    {
+      case GL_SAMPLER_2D:
+      case GL_INT_SAMPLER_2D:
+      case GL_UNSIGNED_INT_SAMPLER_2D:
+      case GL_SAMPLER_2D_SHADOW:
+        return GL_TEXTURE_2D;
+      case GL_SAMPLER_3D:
+      case GL_INT_SAMPLER_3D:
+      case GL_UNSIGNED_INT_SAMPLER_3D:
+        return GL_TEXTURE_3D;
+      case GL_SAMPLER_CUBE:
+      case GL_SAMPLER_CUBE_SHADOW:
+        return GL_TEXTURE_CUBE_MAP;
+      case GL_INT_SAMPLER_CUBE:
+      case GL_UNSIGNED_INT_SAMPLER_CUBE:
+        return GL_TEXTURE_CUBE_MAP;
+      case GL_SAMPLER_2D_ARRAY:
+      case GL_INT_SAMPLER_2D_ARRAY:
+      case GL_UNSIGNED_INT_SAMPLER_2D_ARRAY:
+      case GL_SAMPLER_2D_ARRAY_SHADOW:
+        return GL_TEXTURE_2D_ARRAY;
+      default: UNREACHABLE();
+    }
+
+    return GL_TEXTURE_2D;
 }
 
-static rx::D3DWorkaroundType DiscardWorkaround(bool usesDiscard)
+unsigned int ParseAndStripArrayIndex(std::string* name)
 {
-    return (usesDiscard ? rx::ANGLE_D3D_WORKAROUND_SM3_OPTIMIZER : rx::ANGLE_D3D_WORKAROUND_NONE);
+    unsigned int subscript = GL_INVALID_INDEX;
+
+    // Strip any trailing array operator and retrieve the subscript
+    size_t open = name->find_last_of('[');
+    size_t close = name->find_last_of(']');
+    if (open != std::string::npos && close == name->length() - 1)
+    {
+        subscript = atoi(name->substr(open + 1).c_str());
+        name->erase(open);
+    }
+
+    return subscript;
 }
 
-UniformLocation::UniformLocation(const std::string &name, unsigned int element, unsigned int index) 
-    : name(name), element(element), index(index)
+void GetDefaultInputLayoutFromShader(const std::vector<sh::Attribute> &shaderAttributes, VertexFormat inputLayout[MAX_VERTEX_ATTRIBS])
 {
+    size_t layoutIndex = 0;
+    for (size_t attributeIndex = 0; attributeIndex < shaderAttributes.size(); attributeIndex++)
+    {
+        ASSERT(layoutIndex < MAX_VERTEX_ATTRIBS);
+
+        const sh::Attribute &shaderAttr = shaderAttributes[attributeIndex];
+
+        if (shaderAttr.type != GL_NONE)
+        {
+            GLenum transposedType = TransposeMatrixType(shaderAttr.type);
+
+            for (size_t rowIndex = 0; static_cast<int>(rowIndex) < VariableRowCount(transposedType); rowIndex++, layoutIndex++)
+            {
+                VertexFormat *defaultFormat = &inputLayout[layoutIndex];
+
+                defaultFormat->mType = VariableComponentType(transposedType);
+                defaultFormat->mNormalized = false;
+                defaultFormat->mPureInteger = (defaultFormat->mType != GL_FLOAT); // note: inputs can not be bool
+                defaultFormat->mComponents = VariableColumnCount(transposedType);
+            }
+        }
+    }
 }
 
-unsigned int ProgramBinary::mCurrentSerial = 1;
+std::vector<GLenum> GetDefaultOutputLayoutFromShader(const std::vector<rx::PixelShaderOutputVariable> &shaderOutputVars)
+{
+    std::vector<GLenum> defaultPixelOutput(1);
 
-ProgramBinary::ProgramBinary(rx::Renderer *renderer) : mRenderer(renderer), RefCountObject(0), mSerial(issueSerial())
+    ASSERT(!shaderOutputVars.empty());
+    defaultPixelOutput[0] = GL_COLOR_ATTACHMENT0 + shaderOutputVars[0].outputIndex;
+
+    return defaultPixelOutput;
+}
+
+bool IsRowMajorLayout(const sh::InterfaceBlockField &var)
 {
-    mPixelExecutable = NULL;
-    mVertexExecutable = NULL;
-    mGeometryExecutable = NULL;
+    return var.isRowMajorLayout;
+}
 
-    mValidated = false;
+bool IsRowMajorLayout(const sh::ShaderVariable &var)
+{
+    return false;
+}
 
-    for (int index = 0; index < MAX_VERTEX_ATTRIBS; index++)
-    {
-        mSemanticIndex[index] = -1;
-    }
+}
 
-    for (int index = 0; index < MAX_TEXTURE_IMAGE_UNITS; index++)
+VariableLocation::VariableLocation(const std::string &name, unsigned int element, unsigned int index)
+    : name(name), element(element), index(index)
+{
+}
+
+ProgramBinary::VertexExecutable::VertexExecutable(const VertexFormat inputLayout[],
+                                                  const GLenum signature[],
+                                                  rx::ShaderExecutable *shaderExecutable)
+    : mShaderExecutable(shaderExecutable)
+{
+    for (size_t attributeIndex = 0; attributeIndex < gl::MAX_VERTEX_ATTRIBS; attributeIndex++)
     {
-        mSamplersPS[index].active = false;
+        mInputs[attributeIndex] = inputLayout[attributeIndex];
+        mSignature[attributeIndex] = signature[attributeIndex];
     }
+}
+
+ProgramBinary::VertexExecutable::~VertexExecutable()
+{
+    SafeDelete(mShaderExecutable);
+}
 
-    for (int index = 0; index < IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS; index++)
+bool ProgramBinary::VertexExecutable::matchesSignature(const GLenum signature[]) const
+{
+    for (size_t attributeIndex = 0; attributeIndex < MAX_VERTEX_ATTRIBS; attributeIndex++)
     {
-        mSamplersVS[index].active = false;
+        if (mSignature[attributeIndex] != signature[attributeIndex])
+        {
+            return false;
+        }
     }
 
-    mUsedVertexSamplerRange = 0;
-    mUsedPixelSamplerRange = 0;
-    mUsesPointSize = false;
+    return true;
 }
 
-ProgramBinary::~ProgramBinary()
+ProgramBinary::PixelExecutable::PixelExecutable(const std::vector<GLenum> &outputSignature, rx::ShaderExecutable *shaderExecutable)
+    : mOutputSignature(outputSignature),
+      mShaderExecutable(shaderExecutable)
+{
+}
+
+ProgramBinary::PixelExecutable::~PixelExecutable()
 {
-    delete mPixelExecutable;
-    mPixelExecutable = NULL;
+    SafeDelete(mShaderExecutable);
+}
+
+LinkedVarying::LinkedVarying()
+{
+}
+
+LinkedVarying::LinkedVarying(const std::string &name, GLenum type, GLsizei size, const std::string &semanticName,
+                             unsigned int semanticIndex, unsigned int semanticIndexCount)
+    : name(name), type(type), size(size), semanticName(semanticName), semanticIndex(semanticIndex), semanticIndexCount(semanticIndexCount)
+{
+}
 
-    delete mVertexExecutable;
-    mVertexExecutable = NULL;
+unsigned int ProgramBinary::mCurrentSerial = 1;
 
-    delete mGeometryExecutable;
-    mGeometryExecutable = NULL;
+ProgramBinary::ProgramBinary(rx::ProgramImpl *impl)
+    : RefCountObject(0),
+      mProgram(impl),
+      mGeometryExecutable(NULL),
+      mUsedVertexSamplerRange(0),
+      mUsedPixelSamplerRange(0),
+      mUsesPointSize(false),
+      mShaderVersion(100),
+      mDirtySamplerMapping(true),
+      mValidated(false),
+      mSerial(issueSerial())
+{
+    ASSERT(impl);
 
-    while (!mUniforms.empty())
+    for (int index = 0; index < MAX_VERTEX_ATTRIBS; index++)
     {
-        delete mUniforms.back();
-        mUniforms.pop_back();
+        mSemanticIndex[index] = -1;
     }
 }
 
+ProgramBinary::~ProgramBinary()
+{
+    reset();
+    SafeDelete(mProgram);
+}
+
 unsigned int ProgramBinary::getSerial() const
 {
     return mSerial;
 }
 
+int ProgramBinary::getShaderVersion() const
+{
+    return mShaderVersion;
+}
+
 unsigned int ProgramBinary::issueSerial()
 {
     return mCurrentSerial++;
 }
 
-rx::ShaderExecutable *ProgramBinary::getPixelExecutable()
+rx::ShaderExecutable *ProgramBinary::getPixelExecutableForFramebuffer(const Framebuffer *fbo)
 {
-    return mPixelExecutable;
+    std::vector<GLenum> outputs;
+
+    const gl::ColorbufferInfo &colorbuffers = fbo->getColorbuffersForRender();
+
+    for (size_t colorAttachment = 0; colorAttachment < colorbuffers.size(); ++colorAttachment)
+    {
+        const gl::FramebufferAttachment *colorbuffer = colorbuffers[colorAttachment];
+
+        if (colorbuffer)
+        {
+            outputs.push_back(colorbuffer->getBinding() == GL_BACK ? GL_COLOR_ATTACHMENT0 : colorbuffer->getBinding());
+        }
+        else
+        {
+            outputs.push_back(GL_NONE);
+        }
+    }
+
+    return getPixelExecutableForOutputLayout(outputs);
+}
+
+rx::ShaderExecutable *ProgramBinary::getPixelExecutableForOutputLayout(const std::vector<GLenum> &outputSignature)
+{
+    for (size_t executableIndex = 0; executableIndex < mPixelExecutables.size(); executableIndex++)
+    {
+        if (mPixelExecutables[executableIndex]->matchesSignature(outputSignature))
+        {
+            return mPixelExecutables[executableIndex]->shaderExecutable();
+        }
+    }
+
+    InfoLog tempInfoLog;
+    rx::ShaderExecutable *pixelExecutable = mProgram->getPixelExecutableForOutputLayout(tempInfoLog, outputSignature,
+            mTransformFeedbackLinkedVaryings, (mTransformFeedbackBufferMode == GL_SEPARATE_ATTRIBS));
+
+    if (!pixelExecutable)
+    {
+        std::vector<char> tempCharBuffer(tempInfoLog.getLength() + 3);
+        tempInfoLog.getLog(tempInfoLog.getLength(), NULL, &tempCharBuffer[0]);
+        ERR("Error compiling dynamic pixel executable:\n%s\n", &tempCharBuffer[0]);
+    }
+    else
+    {
+        mPixelExecutables.push_back(new PixelExecutable(outputSignature, pixelExecutable));
+    }
+
+    return pixelExecutable;
 }
 
-rx::ShaderExecutable *ProgramBinary::getVertexExecutable()
+rx::ShaderExecutable *ProgramBinary::getVertexExecutableForInputLayout(const VertexFormat inputLayout[MAX_VERTEX_ATTRIBS])
 {
-    return mVertexExecutable;
+    GLenum signature[MAX_VERTEX_ATTRIBS];
+    mProgram->getDynamicHLSL()->getInputLayoutSignature(inputLayout, signature);
+
+    for (size_t executableIndex = 0; executableIndex < mVertexExecutables.size(); executableIndex++)
+    {
+        if (mVertexExecutables[executableIndex]->matchesSignature(signature))
+        {
+            return mVertexExecutables[executableIndex]->shaderExecutable();
+        }
+    }
+
+    InfoLog tempInfoLog;
+    rx::ShaderExecutable *vertexExecutable = mProgram->getVertexExecutableForInputLayout(tempInfoLog, inputLayout, mShaderAttributes,
+            mTransformFeedbackLinkedVaryings, (mTransformFeedbackBufferMode == GL_SEPARATE_ATTRIBS));
+
+    if (!vertexExecutable)
+    {
+        std::vector<char> tempCharBuffer(tempInfoLog.getLength()+3);
+        tempInfoLog.getLog(tempInfoLog.getLength(), NULL, &tempCharBuffer[0]);
+        ERR("Error compiling dynamic vertex executable:\n%s\n", &tempCharBuffer[0]);
+    }
+    else
+    {
+        mVertexExecutables.push_back(new VertexExecutable(inputLayout, signature, vertexExecutable));
+    }
+
+    return vertexExecutable;
 }
 
-rx::ShaderExecutable *ProgramBinary::getGeometryExecutable()
+rx::ShaderExecutable *ProgramBinary::getGeometryExecutable() const
 {
     return mGeometryExecutable;
 }
@@ -136,7 +336,7 @@ GLuint ProgramBinary::getAttributeLocation(const char *name)
 int ProgramBinary::getSemanticIndex(int attributeIndex)
 {
     ASSERT(attributeIndex >= 0 && attributeIndex < MAX_VERTEX_ATTRIBS);
-    
+
     return mSemanticIndex[attributeIndex];
 }
 
@@ -162,7 +362,7 @@ bool ProgramBinary::usesPointSize() const
 
 bool ProgramBinary::usesPointSpriteEmulation() const
 {
-    return mUsesPointSize && mRenderer->getMajorShaderModel() >= 4;
+    return mUsesPointSize && mProgram->getRenderer()->getMajorShaderModel() >= 4;
 }
 
 bool ProgramBinary::usesGeometryShader() const
@@ -170,26 +370,22 @@ bool ProgramBinary::usesGeometryShader() const
     return usesPointSpriteEmulation();
 }
 
-// Returns the index of the texture image unit (0-19) corresponding to a Direct3D 9 sampler
-// index (0-15 for the pixel shader and 0-3 for the vertex shader).
-GLint ProgramBinary::getSamplerMapping(SamplerType type, unsigned int samplerIndex)
+GLint ProgramBinary::getSamplerMapping(SamplerType type, unsigned int samplerIndex, const Caps &caps)
 {
     GLint logicalTextureUnit = -1;
 
     switch (type)
     {
       case SAMPLER_PIXEL:
-        ASSERT(samplerIndex < sizeof(mSamplersPS)/sizeof(mSamplersPS[0]));
-
-        if (mSamplersPS[samplerIndex].active)
+        ASSERT(samplerIndex < caps.maxTextureImageUnits);
+        if (samplerIndex < mSamplersPS.size() && mSamplersPS[samplerIndex].active)
         {
             logicalTextureUnit = mSamplersPS[samplerIndex].logicalTextureUnit;
         }
         break;
       case SAMPLER_VERTEX:
-        ASSERT(samplerIndex < sizeof(mSamplersVS)/sizeof(mSamplersVS[0]));
-
-        if (mSamplersVS[samplerIndex].active)
+        ASSERT(samplerIndex < caps.maxVertexTextureImageUnits);
+        if (samplerIndex < mSamplersVS.size() && mSamplersVS[samplerIndex].active)
         {
             logicalTextureUnit = mSamplersVS[samplerIndex].logicalTextureUnit;
         }
@@ -197,7 +393,7 @@ GLint ProgramBinary::getSamplerMapping(SamplerType type, unsigned int samplerInd
       default: UNREACHABLE();
     }
 
-    if (logicalTextureUnit >= 0 && logicalTextureUnit < (GLint)mRenderer->getMaxCombinedTextureImageUnits())
+    if (logicalTextureUnit >= 0 && logicalTextureUnit < static_cast<GLint>(caps.maxCombinedTextureImageUnits))
     {
         return logicalTextureUnit;
     }
@@ -207,741 +403,504 @@ GLint ProgramBinary::getSamplerMapping(SamplerType type, unsigned int samplerInd
 
 // Returns the texture type for a given Direct3D 9 sampler type and
 // index (0-15 for the pixel shader and 0-3 for the vertex shader).
-TextureType ProgramBinary::getSamplerTextureType(SamplerType type, unsigned int samplerIndex)
+GLenum ProgramBinary::getSamplerTextureType(SamplerType type, unsigned int samplerIndex)
 {
     switch (type)
     {
       case SAMPLER_PIXEL:
-        ASSERT(samplerIndex < sizeof(mSamplersPS)/sizeof(mSamplersPS[0]));
+        ASSERT(samplerIndex < mSamplersPS.size());
         ASSERT(mSamplersPS[samplerIndex].active);
         return mSamplersPS[samplerIndex].textureType;
       case SAMPLER_VERTEX:
-        ASSERT(samplerIndex < sizeof(mSamplersVS)/sizeof(mSamplersVS[0]));
+        ASSERT(samplerIndex < mSamplersVS.size());
         ASSERT(mSamplersVS[samplerIndex].active);
         return mSamplersVS[samplerIndex].textureType;
       default: UNREACHABLE();
     }
 
-    return TEXTURE_2D;
+    return GL_TEXTURE_2D;
 }
 
 GLint ProgramBinary::getUniformLocation(std::string name)
 {
-    unsigned int subscript = 0;
-
-    // Strip any trailing array operator and retrieve the subscript
-    size_t open = name.find_last_of('[');
-    size_t close = name.find_last_of(']');
-    if (open != std::string::npos && close == name.length() - 1)
-    {
-        subscript = atoi(name.substr(open + 1).c_str());
-        name.erase(open);
-    }
+    unsigned int subscript = ParseAndStripArrayIndex(&name);
 
     unsigned int numUniforms = mUniformIndex.size();
     for (unsigned int location = 0; location < numUniforms; location++)
     {
-        if (mUniformIndex[location].name == name &&
-            mUniformIndex[location].element == subscript)
+        if (mUniformIndex[location].name == name)
         {
-            return location;
+            const int index = mUniformIndex[location].index;
+            const bool isArray = mUniforms[index]->isArray();
+
+            if ((isArray && mUniformIndex[location].element == subscript) ||
+                (subscript == GL_INVALID_INDEX))
+            {
+                return location;
+            }
         }
     }
 
     return -1;
 }
 
-bool ProgramBinary::setUniform1fv(GLint location, GLsizei count, const GLfloat* v)
+GLuint ProgramBinary::getUniformIndex(std::string name)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    int elementCount = targetUniform->elementCount();
-
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
-
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+    unsigned int subscript = ParseAndStripArrayIndex(&name);
 
-    if (targetUniform->type == GL_FLOAT)
+    // The app is not allowed to specify array indices other than 0 for arrays of basic types
+    if (subscript != 0 && subscript != GL_INVALID_INDEX)
     {
-        GLfloat *target = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4;
-
-        for (int i = 0; i < count; i++)
-        {
-            target[0] = v[0];
-            target[1] = 0;
-            target[2] = 0;
-            target[3] = 0;
-            target += 4;
-            v += 1;
-        }
+        return GL_INVALID_INDEX;
     }
-    else if (targetUniform->type == GL_BOOL)
-    {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
 
-        for (int i = 0; i < count; i++)
+    unsigned int numUniforms = mUniforms.size();
+    for (unsigned int index = 0; index < numUniforms; index++)
+    {
+        if (mUniforms[index]->name == name)
         {
-            boolParams[0] = (v[0] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = GL_FALSE;
-            boolParams[2] = GL_FALSE;
-            boolParams[3] = GL_FALSE;
-            boolParams += 4;
-            v += 1;
+            if (mUniforms[index]->isArray() || subscript == GL_INVALID_INDEX)
+            {
+                return index;
+            }
         }
     }
-    else
-    {
-        return false;
-    }
 
-    return true;
+    return GL_INVALID_INDEX;
 }
 
-bool ProgramBinary::setUniform2fv(GLint location, GLsizei count, const GLfloat *v)
+GLuint ProgramBinary::getUniformBlockIndex(std::string name)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
+    unsigned int subscript = ParseAndStripArrayIndex(&name);
+
+    unsigned int numUniformBlocks = mUniformBlocks.size();
+    for (unsigned int blockIndex = 0; blockIndex < numUniformBlocks; blockIndex++)
     {
-        return false;
+        const UniformBlock &uniformBlock = *mUniformBlocks[blockIndex];
+        if (uniformBlock.name == name)
+        {
+            const bool arrayElementZero = (subscript == GL_INVALID_INDEX && uniformBlock.elementIndex == 0);
+            if (subscript == uniformBlock.elementIndex || arrayElementZero)
+            {
+                return blockIndex;
+            }
+        }
     }
 
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    int elementCount = targetUniform->elementCount();
+    return GL_INVALID_INDEX;
+}
 
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
+UniformBlock *ProgramBinary::getUniformBlockByIndex(GLuint blockIndex)
+{
+    ASSERT(blockIndex < mUniformBlocks.size());
+    return mUniformBlocks[blockIndex];
+}
 
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+GLint ProgramBinary::getFragDataLocation(const char *name) const
+{
+    std::string baseName(name);
+    unsigned int arrayIndex;
+    arrayIndex = ParseAndStripArrayIndex(&baseName);
 
-    if (targetUniform->type == GL_FLOAT_VEC2)
+    for (auto locationIt = mOutputVariables.begin(); locationIt != mOutputVariables.end(); locationIt++)
     {
-        GLfloat *target = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4;
+        const VariableLocation &outputVariable = locationIt->second;
 
-        for (int i = 0; i < count; i++)
+        if (outputVariable.name == baseName && (arrayIndex == GL_INVALID_INDEX || arrayIndex == outputVariable.element))
         {
-            target[0] = v[0];
-            target[1] = v[1];
-            target[2] = 0;
-            target[3] = 0;
-            target += 4;
-            v += 2;
+            return static_cast<GLint>(locationIt->first);
         }
     }
-    else if (targetUniform->type == GL_BOOL_VEC2)
-    {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
 
-        for (int i = 0; i < count; i++)
-        {
-            boolParams[0] = (v[0] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = (v[1] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[2] = GL_FALSE;
-            boolParams[3] = GL_FALSE;
-            boolParams += 4;
-            v += 2;
-        }
-    }
-    else 
-    {
-        return false;
-    }
+    return -1;
+}
 
-    return true;
+size_t ProgramBinary::getTransformFeedbackVaryingCount() const
+{
+    return mTransformFeedbackLinkedVaryings.size();
 }
 
-bool ProgramBinary::setUniform3fv(GLint location, GLsizei count, const GLfloat *v)
+const LinkedVarying &ProgramBinary::getTransformFeedbackVarying(size_t idx) const
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
+    return mTransformFeedbackLinkedVaryings[idx];
+}
 
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
+GLenum ProgramBinary::getTransformFeedbackBufferMode() const
+{
+    return mTransformFeedbackBufferMode;
+}
 
-    int elementCount = targetUniform->elementCount();
+template <typename T>
+static inline void SetIfDirty(T *dest, const T& source, bool *dirtyFlag)
+{
+    ASSERT(dest != NULL);
+    ASSERT(dirtyFlag != NULL);
+
+    *dirtyFlag = *dirtyFlag || (memcmp(dest, &source, sizeof(T)) != 0);
+    *dest = source;
+}
 
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
+template <typename T>
+void ProgramBinary::setUniform(GLint location, GLsizei count, const T* v, GLenum targetUniformType)
+{
+    const int components = VariableComponentCount(targetUniformType);
+    const GLenum targetBoolType = VariableBoolVectorType(targetUniformType);
+
+    LinkedUniform *targetUniform = getUniformByLocation(location);
+
+    int elementCount = targetUniform->elementCount();
 
     count = std::min(elementCount - (int)mUniformIndex[location].element, count);
 
-    if (targetUniform->type == GL_FLOAT_VEC3)
+    if (targetUniform->type == targetUniformType)
     {
-        GLfloat *target = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4;
+        T *target = reinterpret_cast<T*>(targetUniform->data) + mUniformIndex[location].element * 4;
 
         for (int i = 0; i < count; i++)
         {
-            target[0] = v[0];
-            target[1] = v[1];
-            target[2] = v[2];
-            target[3] = 0;
-            target += 4;
-            v += 3;
+            T *dest = target + (i * 4);
+            const T *source = v + (i * components);
+
+            for (int c = 0; c < components; c++)
+            {
+                SetIfDirty(dest + c, source[c], &targetUniform->dirty);
+            }
+            for (int c = components; c < 4; c++)
+            {
+                SetIfDirty(dest + c, T(0), &targetUniform->dirty);
+            }
         }
     }
-    else if (targetUniform->type == GL_BOOL_VEC3)
+    else if (targetUniform->type == targetBoolType)
     {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+        GLint *boolParams = reinterpret_cast<GLint*>(targetUniform->data) + mUniformIndex[location].element * 4;
 
         for (int i = 0; i < count; i++)
         {
-            boolParams[0] = (v[0] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = (v[1] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[2] = (v[2] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[3] = GL_FALSE;
-            boolParams += 4;
-            v += 3;
+            GLint *dest = boolParams + (i * 4);
+            const T *source = v + (i * components);
+
+            for (int c = 0; c < components; c++)
+            {
+                SetIfDirty(dest + c, (source[c] == static_cast<T>(0)) ? GL_FALSE : GL_TRUE, &targetUniform->dirty);
+            }
+            for (int c = components; c < 4; c++)
+            {
+                SetIfDirty(dest + c, GL_FALSE, &targetUniform->dirty);
+            }
         }
     }
-    else 
+    else if (IsSampler(targetUniform->type))
     {
-        return false;
-    }
-
-    return true;
-}
-
-bool ProgramBinary::setUniform4fv(GLint location, GLsizei count, const GLfloat *v)
-{
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    int elementCount = targetUniform->elementCount();
-
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
+        ASSERT(targetUniformType == GL_INT);
 
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+        GLint *target = reinterpret_cast<GLint*>(targetUniform->data) + mUniformIndex[location].element * 4;
 
-    if (targetUniform->type == GL_FLOAT_VEC4)
-    {
-        GLfloat *target = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4;
+        bool wasDirty = targetUniform->dirty;
 
         for (int i = 0; i < count; i++)
         {
-            target[0] = v[0];
-            target[1] = v[1];
-            target[2] = v[2];
-            target[3] = v[3];
-            target += 4;
-            v += 4;
+            GLint *dest = target + (i * 4);
+            const GLint *source = reinterpret_cast<const GLint*>(v) + (i * components);
+
+            SetIfDirty(dest + 0, source[0], &targetUniform->dirty);
+            SetIfDirty(dest + 1, 0, &targetUniform->dirty);
+            SetIfDirty(dest + 2, 0, &targetUniform->dirty);
+            SetIfDirty(dest + 3, 0, &targetUniform->dirty);
         }
-    }
-    else if (targetUniform->type == GL_BOOL_VEC4)
-    {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
 
-        for (int i = 0; i < count; i++)
+        if (!wasDirty && targetUniform->dirty)
         {
-            boolParams[0] = (v[0] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = (v[1] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[2] = (v[2] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams[3] = (v[3] == 0.0f) ? GL_FALSE : GL_TRUE;
-            boolParams += 4;
-            v += 4;
+            mDirtySamplerMapping = true;
         }
     }
-    else 
-    {
-        return false;
-    }
+    else UNREACHABLE();
+}
 
-    return true;
+void ProgramBinary::setUniform1fv(GLint location, GLsizei count, const GLfloat* v)
+{
+    setUniform(location, count, v, GL_FLOAT);
 }
 
-template<typename T, int targetWidth, int targetHeight, int srcWidth, int srcHeight>
-void transposeMatrix(T *target, const GLfloat *value)
+void ProgramBinary::setUniform2fv(GLint location, GLsizei count, const GLfloat *v)
 {
-    int copyWidth = std::min(targetWidth, srcWidth);
-    int copyHeight = std::min(targetHeight, srcHeight);
+    setUniform(location, count, v, GL_FLOAT_VEC2);
+}
+
+void ProgramBinary::setUniform3fv(GLint location, GLsizei count, const GLfloat *v)
+{
+    setUniform(location, count, v, GL_FLOAT_VEC3);
+}
+
+void ProgramBinary::setUniform4fv(GLint location, GLsizei count, const GLfloat *v)
+{
+    setUniform(location, count, v, GL_FLOAT_VEC4);
+}
+
+template<typename T>
+bool transposeMatrix(T *target, const GLfloat *value, int targetWidth, int targetHeight, int srcWidth, int srcHeight)
+{
+    bool dirty = false;
+    int copyWidth = std::min(targetHeight, srcWidth);
+    int copyHeight = std::min(targetWidth, srcHeight);
 
     for (int x = 0; x < copyWidth; x++)
     {
         for (int y = 0; y < copyHeight; y++)
         {
-            target[x * targetWidth + y] = (T)value[y * srcWidth + x];
+            SetIfDirty(target + (x * targetWidth + y), static_cast<T>(value[y * srcWidth + x]), &dirty);
         }
     }
     // clear unfilled right side
-    for (int y = 0; y < copyHeight; y++)
+    for (int y = 0; y < copyWidth; y++)
     {
-        for (int x = srcWidth; x < targetWidth; x++)
+        for (int x = copyHeight; x < targetWidth; x++)
         {
-            target[y * targetWidth + x] = (T)0;
+            SetIfDirty(target + (y * targetWidth + x), static_cast<T>(0), &dirty);
         }
     }
     // clear unfilled bottom.
-    for (int y = srcHeight; y < targetHeight; y++)
+    for (int y = copyWidth; y < targetHeight; y++)
     {
         for (int x = 0; x < targetWidth; x++)
         {
-            target[y * targetWidth + x] = (T)0;
+            SetIfDirty(target + (y * targetWidth + x), static_cast<T>(0), &dirty);
         }
     }
-}
-
-bool ProgramBinary::setUniformMatrix2fv(GLint location, GLsizei count, const GLfloat *value)
-{
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    if (targetUniform->type != GL_FLOAT_MAT2)
-    {
-        return false;
-    }
-
-    int elementCount = targetUniform->elementCount();
-
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
-
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
-    GLfloat *target = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 8;
-
-    for (int i = 0; i < count; i++)
-    {
-        transposeMatrix<GLfloat,4,2,2,2>(target, value);
-        target += 8;
-        value += 4;
-    }
-
-    return true;
-}
-
-bool ProgramBinary::setUniformMatrix3fv(GLint location, GLsizei count, const GLfloat *value)
-{
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    if (targetUniform->type != GL_FLOAT_MAT3)
-    {
-        return false;
-    }
-
-    int elementCount = targetUniform->elementCount();
 
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
-
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
-    GLfloat *target = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 12;
-
-    for (int i = 0; i < count; i++)
-    {
-        transposeMatrix<GLfloat,4,3,3,3>(target, value);
-        target += 12;
-        value += 9;
-    }
-
-    return true;
+    return dirty;
 }
 
-
-bool ProgramBinary::setUniformMatrix4fv(GLint location, GLsizei count, const GLfloat *value)
+template<typename T>
+bool expandMatrix(T *target, const GLfloat *value, int targetWidth, int targetHeight, int srcWidth, int srcHeight)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    if (targetUniform->type != GL_FLOAT_MAT4)
-    {
-        return false;
-    }
-
-    int elementCount = targetUniform->elementCount();
-
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
-
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
-    GLfloat *target = (GLfloat*)(targetUniform->data + mUniformIndex[location].element * sizeof(GLfloat) * 16);
-
-    for (int i = 0; i < count; i++)
-    {
-        transposeMatrix<GLfloat,4,4,4,4>(target, value);
-        target += 16;
-        value += 16;
-    }
-
-    return true;
-}
-
-bool ProgramBinary::setUniform1iv(GLint location, GLsizei count, const GLint *v)
-{
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
-
-    int elementCount = targetUniform->elementCount();
-
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
-
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+    bool dirty = false;
+    int copyWidth = std::min(targetWidth, srcWidth);
+    int copyHeight = std::min(targetHeight, srcHeight);
 
-    if (targetUniform->type == GL_INT ||
-        targetUniform->type == GL_SAMPLER_2D ||
-        targetUniform->type == GL_SAMPLER_CUBE)
+    for (int y = 0; y < copyHeight; y++)
     {
-        GLint *target = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
-
-        for (int i = 0; i < count; i++)
+        for (int x = 0; x < copyWidth; x++)
         {
-            target[0] = v[0];
-            target[1] = 0;
-            target[2] = 0;
-            target[3] = 0;
-            target += 4;
-            v += 1;
+            SetIfDirty(target + (y * targetWidth + x), static_cast<T>(value[y * srcWidth + x]), &dirty);
         }
     }
-    else if (targetUniform->type == GL_BOOL)
+    // clear unfilled right side
+    for (int y = 0; y < copyHeight; y++)
     {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
-
-        for (int i = 0; i < count; i++)
+        for (int x = copyWidth; x < targetWidth; x++)
         {
-            boolParams[0] = (v[0] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = GL_FALSE;
-            boolParams[2] = GL_FALSE;
-            boolParams[3] = GL_FALSE;
-            boolParams += 4;
-            v += 1;
+            SetIfDirty(target + (y * targetWidth + x), static_cast<T>(0), &dirty);
         }
     }
-    else
+    // clear unfilled bottom.
+    for (int y = copyHeight; y < targetHeight; y++)
     {
-        return false;
+        for (int x = 0; x < targetWidth; x++)
+        {
+            SetIfDirty(target + (y * targetWidth + x), static_cast<T>(0), &dirty);
+        }
     }
 
-    return true;
+    return dirty;
 }
 
-bool ProgramBinary::setUniform2iv(GLint location, GLsizei count, const GLint *v)
+template <int cols, int rows>
+void ProgramBinary::setUniformMatrixfv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value, GLenum targetUniformType)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
+    LinkedUniform *targetUniform = getUniformByLocation(location);
 
     int elementCount = targetUniform->elementCount();
 
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
-
     count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+    const unsigned int targetMatrixStride = (4 * rows);
+    GLfloat *target = (GLfloat*)(targetUniform->data + mUniformIndex[location].element * sizeof(GLfloat) * targetMatrixStride);
 
-    if (targetUniform->type == GL_INT_VEC2)
+    for (int i = 0; i < count; i++)
     {
-        GLint *target = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
-
-        for (int i = 0; i < count; i++)
+        // Internally store matrices as transposed versions to accomodate HLSL matrix indexing
+        if (transpose == GL_FALSE)
         {
-            target[0] = v[0];
-            target[1] = v[1];
-            target[2] = 0;
-            target[3] = 0;
-            target += 4;
-            v += 2;
+            targetUniform->dirty = transposeMatrix<GLfloat>(target, value, 4, rows, rows, cols) || targetUniform->dirty;
         }
-    }
-    else if (targetUniform->type == GL_BOOL_VEC2)
-    {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
-
-        for (int i = 0; i < count; i++)
+        else
         {
-            boolParams[0] = (v[0] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = (v[1] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[2] = GL_FALSE;
-            boolParams[3] = GL_FALSE;
-            boolParams += 4;
-            v += 2;
+            targetUniform->dirty = expandMatrix<GLfloat>(target, value, 4, rows, cols, rows) || targetUniform->dirty;
         }
+        target += targetMatrixStride;
+        value += cols * rows;
     }
-    else
-    {
-        return false;
-    }
-
-    return true;
 }
 
-bool ProgramBinary::setUniform3iv(GLint location, GLsizei count, const GLint *v)
+void ProgramBinary::setUniformMatrix2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
+    setUniformMatrixfv<2, 2>(location, count, transpose, value, GL_FLOAT_MAT2);
+}
 
-    int elementCount = targetUniform->elementCount();
+void ProgramBinary::setUniformMatrix3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<3, 3>(location, count, transpose, value, GL_FLOAT_MAT3);
+}
 
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
+void ProgramBinary::setUniformMatrix4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<4, 4>(location, count, transpose, value, GL_FLOAT_MAT4);
+}
 
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+void ProgramBinary::setUniformMatrix2x3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<2, 3>(location, count, transpose, value, GL_FLOAT_MAT2x3);
+}
 
-    if (targetUniform->type == GL_INT_VEC3)
-    {
-        GLint *target = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+void ProgramBinary::setUniformMatrix3x2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<3, 2>(location, count, transpose, value, GL_FLOAT_MAT3x2);
+}
 
-        for (int i = 0; i < count; i++)
-        {
-            target[0] = v[0];
-            target[1] = v[1];
-            target[2] = v[2];
-            target[3] = 0;
-            target += 4;
-            v += 3;
-        }
-    }
-    else if (targetUniform->type == GL_BOOL_VEC3)
-    {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+void ProgramBinary::setUniformMatrix2x4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<2, 4>(location, count, transpose, value, GL_FLOAT_MAT2x4);
+}
 
-        for (int i = 0; i < count; i++)
-        {
-            boolParams[0] = (v[0] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = (v[1] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[2] = (v[2] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[3] = GL_FALSE;
-            boolParams += 4;
-            v += 3;
-        }
-    }
-    else
-    {
-        return false;
-    }
+void ProgramBinary::setUniformMatrix4x2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<4, 2>(location, count, transpose, value, GL_FLOAT_MAT4x2);
+}
 
-    return true;
+void ProgramBinary::setUniformMatrix3x4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
+{
+    setUniformMatrixfv<3, 4>(location, count, transpose, value, GL_FLOAT_MAT3x4);
 }
 
-bool ProgramBinary::setUniform4iv(GLint location, GLsizei count, const GLint *v)
+void ProgramBinary::setUniformMatrix4x3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
+    setUniformMatrixfv<4, 3>(location, count, transpose, value, GL_FLOAT_MAT4x3);
+}
 
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-    targetUniform->dirty = true;
+void ProgramBinary::setUniform1iv(GLint location, GLsizei count, const GLint *v)
+{
+    setUniform(location, count, v, GL_INT);
+}
 
-    int elementCount = targetUniform->elementCount();
+void ProgramBinary::setUniform2iv(GLint location, GLsizei count, const GLint *v)
+{
+    setUniform(location, count, v, GL_INT_VEC2);
+}
 
-    if (elementCount == 1 && count > 1)
-        return false; // attempting to write an array to a non-array uniform is an INVALID_OPERATION
+void ProgramBinary::setUniform3iv(GLint location, GLsizei count, const GLint *v)
+{
+    setUniform(location, count, v, GL_INT_VEC3);
+}
 
-    count = std::min(elementCount - (int)mUniformIndex[location].element, count);
+void ProgramBinary::setUniform4iv(GLint location, GLsizei count, const GLint *v)
+{
+    setUniform(location, count, v, GL_INT_VEC4);
+}
 
-    if (targetUniform->type == GL_INT_VEC4)
-    {
-        GLint *target = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+void ProgramBinary::setUniform1uiv(GLint location, GLsizei count, const GLuint *v)
+{
+    setUniform(location, count, v, GL_UNSIGNED_INT);
+}
 
-        for (int i = 0; i < count; i++)
-        {
-            target[0] = v[0];
-            target[1] = v[1];
-            target[2] = v[2];
-            target[3] = v[3];
-            target += 4;
-            v += 4;
-        }
-    }
-    else if (targetUniform->type == GL_BOOL_VEC4)
-    {
-        GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+void ProgramBinary::setUniform2uiv(GLint location, GLsizei count, const GLuint *v)
+{
+    setUniform(location, count, v, GL_UNSIGNED_INT_VEC2);
+}
 
-        for (int i = 0; i < count; i++)
-        {
-            boolParams[0] = (v[0] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[1] = (v[1] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[2] = (v[2] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams[3] = (v[3] == 0) ? GL_FALSE : GL_TRUE;
-            boolParams += 4;
-            v += 4;
-        }
-    }
-    else
-    {
-        return false;
-    }
+void ProgramBinary::setUniform3uiv(GLint location, GLsizei count, const GLuint *v)
+{
+    setUniform(location, count, v, GL_UNSIGNED_INT_VEC3);
+}
 
-    return true;
+void ProgramBinary::setUniform4uiv(GLint location, GLsizei count, const GLuint *v)
+{
+    setUniform(location, count, v, GL_UNSIGNED_INT_VEC4);
 }
 
-bool ProgramBinary::getUniformfv(GLint location, GLsizei *bufSize, GLfloat *params)
+template <typename T>
+void ProgramBinary::getUniformv(GLint location, T *params, GLenum uniformType)
 {
-    if (location < 0 || location >= (int)mUniformIndex.size())
+    LinkedUniform *targetUniform = mUniforms[mUniformIndex[location].index];
+
+    if (IsMatrixType(targetUniform->type))
     {
-        return false;
+        const int rows = VariableRowCount(targetUniform->type);
+        const int cols = VariableColumnCount(targetUniform->type);
+        transposeMatrix(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4 * rows, rows, cols, 4, rows);
     }
-
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
-
-    // sized queries -- ensure the provided buffer is large enough
-    if (bufSize)
+    else if (uniformType == VariableComponentType(targetUniform->type))
     {
-        int requiredBytes = UniformExternalSize(targetUniform->type);
-        if (*bufSize < requiredBytes)
-        {
-            return false;
-        }
+        unsigned int size = VariableComponentCount(targetUniform->type);
+        memcpy(params, targetUniform->data + mUniformIndex[location].element * 4 * sizeof(T),
+                size * sizeof(T));
     }
-
-    switch (targetUniform->type)
+    else
     {
-      case GL_FLOAT_MAT2:
-        transposeMatrix<GLfloat,2,2,4,2>(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 8);
-        break;
-      case GL_FLOAT_MAT3:
-        transposeMatrix<GLfloat,3,3,4,3>(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 12);
-        break;
-      case GL_FLOAT_MAT4:
-        transposeMatrix<GLfloat,4,4,4,4>(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 16);
-        break;
-      default:
+        unsigned int size = VariableComponentCount(targetUniform->type);
+        switch (VariableComponentType(targetUniform->type))
         {
-            unsigned int size = UniformComponentCount(targetUniform->type);
-
-            switch (UniformComponentType(targetUniform->type))
+          case GL_BOOL:
             {
-              case GL_BOOL:
-                {
-                    GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+                GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
 
-                    for (unsigned int i = 0; i < size; i++)
-                    {
-                        params[i] = (boolParams[i] == GL_FALSE) ? 0.0f : 1.0f;
-                    }
-                }
-                break;
-              case GL_FLOAT:
-                memcpy(params, targetUniform->data + mUniformIndex[location].element * 4 * sizeof(GLfloat),
-                       size * sizeof(GLfloat));
-                break;
-              case GL_INT:
+                for (unsigned int i = 0; i < size; i++)
                 {
-                    GLint *intParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
-
-                    for (unsigned int i = 0; i < size; i++)
-                    {
-                        params[i] = (float)intParams[i];
-                    }
+                    params[i] = (boolParams[i] == GL_FALSE) ? static_cast<T>(0) : static_cast<T>(1);
                 }
-                break;
-              default: UNREACHABLE();
             }
-        }
-    }
-
-    return true;
-}
+            break;
 
-bool ProgramBinary::getUniformiv(GLint location, GLsizei *bufSize, GLint *params)
-{
-    if (location < 0 || location >= (int)mUniformIndex.size())
-    {
-        return false;
-    }
+          case GL_FLOAT:
+            {
+                GLfloat *floatParams = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4;
 
-    Uniform *targetUniform = mUniforms[mUniformIndex[location].index];
+                for (unsigned int i = 0; i < size; i++)
+                {
+                    params[i] = static_cast<T>(floatParams[i]);
+                }
+            }
+            break;
 
-    // sized queries -- ensure the provided buffer is large enough
-    if (bufSize)
-    {
-        int requiredBytes = UniformExternalSize(targetUniform->type);
-        if (*bufSize < requiredBytes)
-        {
-            return false;
-        }
-    }
+          case GL_INT:
+            {
+                GLint *intParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
 
-    switch (targetUniform->type)
-    {
-      case GL_FLOAT_MAT2:
-        transposeMatrix<GLint,2,2,4,2>(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 8);
-        break;
-      case GL_FLOAT_MAT3:
-        transposeMatrix<GLint,3,3,4,3>(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 12);
-        break;
-      case GL_FLOAT_MAT4:
-        transposeMatrix<GLint,4,4,4,4>(params, (GLfloat*)targetUniform->data + mUniformIndex[location].element * 16);
-        break;
-      default:
-        {
-            unsigned int size = VariableColumnCount(targetUniform->type);
+                for (unsigned int i = 0; i < size; i++)
+                {
+                    params[i] = static_cast<T>(intParams[i]);
+                }
+            }
+            break;
 
-            switch (UniformComponentType(targetUniform->type))
+          case GL_UNSIGNED_INT:
             {
-              case GL_BOOL:
-                {
-                    GLint *boolParams = (GLint*)targetUniform->data + mUniformIndex[location].element * 4;
+                GLuint *uintParams = (GLuint*)targetUniform->data + mUniformIndex[location].element * 4;
 
-                    for (unsigned int i = 0; i < size; i++)
-                    {
-                        params[i] = boolParams[i];
-                    }
-                }
-                break;
-              case GL_FLOAT:
+                for (unsigned int i = 0; i < size; i++)
                 {
-                    GLfloat *floatParams = (GLfloat*)targetUniform->data + mUniformIndex[location].element * 4;
-
-                    for (unsigned int i = 0; i < size; i++)
-                    {
-                        params[i] = (GLint)floatParams[i];
-                    }
+                    params[i] = static_cast<T>(uintParams[i]);
                 }
-                break;
-              case GL_INT:
-                memcpy(params, targetUniform->data + mUniformIndex[location].element * 4 * sizeof(GLint),
-                    size * sizeof(GLint));
-                break;
-              default: UNREACHABLE();
             }
+            break;
+
+          default: UNREACHABLE();
         }
     }
+}
 
-    return true;
+void ProgramBinary::getUniformfv(GLint location, GLfloat *params)
+{
+    getUniformv(location, params, GL_FLOAT);
+}
+
+void ProgramBinary::getUniformiv(GLint location, GLint *params)
+{
+    getUniformv(location, params, GL_INT);
+}
+
+void ProgramBinary::getUniformuiv(GLint location, GLuint *params)
+{
+    getUniformv(location, params, GL_UNSIGNED_INT);
 }
 
 void ProgramBinary::dirtyAllUniforms()
@@ -953,23 +912,28 @@ void ProgramBinary::dirtyAllUniforms()
     }
 }
 
-// Applies all the uniforms set for this program object to the renderer
-void ProgramBinary::applyUniforms()
+void ProgramBinary::updateSamplerMapping()
 {
+    if (!mDirtySamplerMapping)
+    {
+        return;
+    }
+
+    mDirtySamplerMapping = false;
+
     // Retrieve sampler uniform values
-    for (std::vector<Uniform*>::iterator ub = mUniforms.begin(), ue = mUniforms.end(); ub != ue; ++ub)
+    for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); uniformIndex++)
     {
-        Uniform *targetUniform = *ub;
+        LinkedUniform *targetUniform = mUniforms[uniformIndex];
 
         if (targetUniform->dirty)
         {
-            if (targetUniform->type == GL_SAMPLER_2D || 
-                targetUniform->type == GL_SAMPLER_CUBE)
+            if (IsSampler(targetUniform->type))
             {
                 int count = targetUniform->elementCount();
-                GLint (*v)[4] = (GLint(*)[4])targetUniform->data;
+                GLint (*v)[4] = reinterpret_cast<GLint(*)[4]>(targetUniform->data);
 
-                if (targetUniform->psRegisterIndex >= 0)
+                if (targetUniform->isReferencedByFragmentShader())
                 {
                     unsigned int firstIndex = targetUniform->psRegisterIndex;
 
@@ -977,7 +941,7 @@ void ProgramBinary::applyUniforms()
                     {
                         unsigned int samplerIndex = firstIndex + i;
 
-                        if (samplerIndex < MAX_TEXTURE_IMAGE_UNITS)
+                        if (samplerIndex < mSamplersPS.size())
                         {
                             ASSERT(mSamplersPS[samplerIndex].active);
                             mSamplersPS[samplerIndex].logicalTextureUnit = v[i][0];
@@ -985,7 +949,7 @@ void ProgramBinary::applyUniforms()
                     }
                 }
 
-                if (targetUniform->vsRegisterIndex >= 0)
+                if (targetUniform->isReferencedByVertexShader())
                 {
                     unsigned int firstIndex = targetUniform->vsRegisterIndex;
 
@@ -993,7 +957,7 @@ void ProgramBinary::applyUniforms()
                     {
                         unsigned int samplerIndex = firstIndex + i;
 
-                        if (samplerIndex < IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS)
+                        if (samplerIndex < mSamplersVS.size())
                         {
                             ASSERT(mSamplersVS[samplerIndex].active);
                             mSamplersVS[samplerIndex].logicalTextureUnit = v[i][0];
@@ -1003,882 +967,568 @@ void ProgramBinary::applyUniforms()
             }
         }
     }
-
-    mRenderer->applyUniforms(this, &mUniforms);
 }
 
-// Packs varyings into generic varying registers, using the algorithm from [OpenGL ES Shading Language 1.00 rev. 17] appendix A section 7 page 111
-// Returns the number of used varying registers, or -1 if unsuccesful
-int ProgramBinary::packVaryings(InfoLog &infoLog, const Varying *packing[][4], FragmentShader *fragmentShader)
+// Applies all the uniforms set for this program object to the renderer
+Error ProgramBinary::applyUniforms()
 {
-    const int maxVaryingVectors = mRenderer->getMaxVaryingVectors();
+    updateSamplerMapping();
 
-    fragmentShader->resetVaryingsRegisterAssignment();
-
-    for (VaryingList::iterator varying = fragmentShader->mVaryings.begin(); varying != fragmentShader->mVaryings.end(); varying++)
+    Error error = mProgram->getRenderer()->applyUniforms(*this);
+    if (error.isError())
     {
-        int n = VariableRowCount(varying->type) * varying->size;
-        int m = VariableColumnCount(varying->type);
-        bool success = false;
-
-        if (m == 2 || m == 3 || m == 4)
-        {
-            for (int r = 0; r <= maxVaryingVectors - n && !success; r++)
-            {
-                bool available = true;
-
-                for (int y = 0; y < n && available; y++)
-                {
-                    for (int x = 0; x < m && available; x++)
-                    {
-                        if (packing[r + y][x])
-                        {
-                            available = false;
-                        }
-                    }
-                }
+        return error;
+    }
 
-                if (available)
-                {
-                    varying->reg = r;
-                    varying->col = 0;
+    for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); uniformIndex++)
+    {
+        mUniforms[uniformIndex]->dirty = false;
+    }
 
-                    for (int y = 0; y < n; y++)
-                    {
-                        for (int x = 0; x < m; x++)
-                        {
-                            packing[r + y][x] = &*varying;
-                        }
-                    }
+    return gl::Error(GL_NO_ERROR);
+}
 
-                    success = true;
-                }
-            }
+Error ProgramBinary::applyUniformBuffers(const std::vector<gl::Buffer*> boundBuffers, const Caps &caps)
+{
+    const gl::Buffer *vertexUniformBuffers[gl::IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS] = {NULL};
+    const gl::Buffer *fragmentUniformBuffers[gl::IMPLEMENTATION_MAX_FRAGMENT_SHADER_UNIFORM_BUFFERS] = {NULL};
 
-            if (!success && m == 2)
-            {
-                for (int r = maxVaryingVectors - n; r >= 0 && !success; r--)
-                {
-                    bool available = true;
+    const unsigned int reservedBuffersInVS = mProgram->getRenderer()->getReservedVertexUniformBuffers();
+    const unsigned int reservedBuffersInFS = mProgram->getRenderer()->getReservedFragmentUniformBuffers();
 
-                    for (int y = 0; y < n && available; y++)
-                    {
-                        for (int x = 2; x < 4 && available; x++)
-                        {
-                            if (packing[r + y][x])
-                            {
-                                available = false;
-                            }
-                        }
-                    }
+    ASSERT(boundBuffers.size() == mUniformBlocks.size());
 
-                    if (available)
-                    {
-                        varying->reg = r;
-                        varying->col = 2;
+    for (unsigned int uniformBlockIndex = 0; uniformBlockIndex < mUniformBlocks.size(); uniformBlockIndex++)
+    {
+        UniformBlock *uniformBlock = getUniformBlockByIndex(uniformBlockIndex);
+        gl::Buffer *uniformBuffer = boundBuffers[uniformBlockIndex];
 
-                        for (int y = 0; y < n; y++)
-                        {
-                            for (int x = 2; x < 4; x++)
-                            {
-                                packing[r + y][x] = &*varying;
-                            }
-                        }
+        ASSERT(uniformBlock && uniformBuffer);
 
-                        success = true;
-                    }
-                }
-            }
-        }
-        else if (m == 1)
+        if (uniformBuffer->getSize() < uniformBlock->dataSize)
         {
-            int space[4] = {0};
-
-            for (int y = 0; y < maxVaryingVectors; y++)
-            {
-                for (int x = 0; x < 4; x++)
-                {
-                    space[x] += packing[y][x] ? 0 : 1;
-                }
-            }
-
-            int column = 0;
-
-            for (int x = 0; x < 4; x++)
-            {
-                if (space[x] >= n && space[x] < space[column])
-                {
-                    column = x;
-                }
-            }
-
-            if (space[column] >= n)
-            {
-                for (int r = 0; r < maxVaryingVectors; r++)
-                {
-                    if (!packing[r][column])
-                    {
-                        varying->reg = r;
-
-                        for (int y = r; y < r + n; y++)
-                        {
-                            packing[y][column] = &*varying;
-                        }
-
-                        break;
-                    }
-                }
-
-                varying->col = column;
-
-                success = true;
-            }
+            // undefined behaviour
+            return gl::Error(GL_INVALID_OPERATION, "It is undefined behaviour to use a uniform buffer that is too small.");
         }
-        else UNREACHABLE();
 
-        if (!success)
+        // Unnecessary to apply an unreferenced standard or shared UBO
+        if (!uniformBlock->isReferencedByVertexShader() && !uniformBlock->isReferencedByFragmentShader())
         {
-            infoLog.append("Could not pack varying %s", varying->name.c_str());
-
-            return -1;
+            continue;
         }
-    }
 
-    // Return the number of used registers
-    int registers = 0;
+        if (uniformBlock->isReferencedByVertexShader())
+        {
+            unsigned int registerIndex = uniformBlock->vsRegisterIndex - reservedBuffersInVS;
+            ASSERT(vertexUniformBuffers[registerIndex] == NULL);
+            ASSERT(registerIndex < caps.maxVertexUniformBlocks);
+            vertexUniformBuffers[registerIndex] = uniformBuffer;
+        }
 
-    for (int r = 0; r < maxVaryingVectors; r++)
-    {
-        if (packing[r][0] || packing[r][1] || packing[r][2] || packing[r][3])
+        if (uniformBlock->isReferencedByFragmentShader())
         {
-            registers++;
+            unsigned int registerIndex = uniformBlock->psRegisterIndex - reservedBuffersInFS;
+            ASSERT(fragmentUniformBuffers[registerIndex] == NULL);
+            ASSERT(registerIndex < caps.maxFragmentUniformBlocks);
+            fragmentUniformBuffers[registerIndex] = uniformBuffer;
         }
     }
 
-    return registers;
+    return mProgram->getRenderer()->setUniformBuffers(vertexUniformBuffers, fragmentUniformBuffers);
 }
 
-bool ProgramBinary::linkVaryings(InfoLog &infoLog, int registers, const Varying *packing[][4],
-                                 std::string& pixelHLSL, std::string& vertexHLSL,
-                                 FragmentShader *fragmentShader, VertexShader *vertexShader)
+bool ProgramBinary::linkVaryings(InfoLog &infoLog, Shader *fragmentShader, Shader *vertexShader)
 {
-    if (pixelHLSL.empty() || vertexHLSL.empty())
-    {
-        return false;
-    }
-
-    bool usesMRT = fragmentShader->mUsesMultipleRenderTargets;
-    bool usesFragColor = fragmentShader->mUsesFragColor;
-    bool usesFragData = fragmentShader->mUsesFragData;
-    if (usesFragColor && usesFragData)
-    {
-        infoLog.append("Cannot use both gl_FragColor and gl_FragData in the same fragment shader.");
-        return false;
-    }
-
-    // Write the HLSL input/output declarations
-    const int shaderModel = mRenderer->getMajorShaderModel();
-    const int maxVaryingVectors = mRenderer->getMaxVaryingVectors();
-
-    const int registersNeeded = registers + (fragmentShader->mUsesFragCoord ? 1 : 0) + (fragmentShader->mUsesPointCoord ? 1 : 0);
-
-    // The output color is broadcast to all enabled draw buffers when writing to gl_FragColor
-    const bool broadcast = fragmentShader->mUsesFragColor;
-    const unsigned int numRenderTargets = (broadcast || usesMRT ? mRenderer->getMaxRenderTargets() : 1);
+    std::vector<PackedVarying> &fragmentVaryings = fragmentShader->getVaryings();
+    std::vector<PackedVarying> &vertexVaryings = vertexShader->getVaryings();
 
-    if (registersNeeded > maxVaryingVectors)
-    {
-        infoLog.append("No varying registers left to support gl_FragCoord/gl_PointCoord");
-
-        return false;
-    }
-
-    vertexShader->resetVaryingsRegisterAssignment();
-
-    for (VaryingList::iterator input = fragmentShader->mVaryings.begin(); input != fragmentShader->mVaryings.end(); input++)
+    for (size_t fragVaryingIndex = 0; fragVaryingIndex < fragmentVaryings.size(); fragVaryingIndex++)
     {
+        PackedVarying *input = &fragmentVaryings[fragVaryingIndex];
         bool matched = false;
 
-        for (VaryingList::iterator output = vertexShader->mVaryings.begin(); output != vertexShader->mVaryings.end(); output++)
+        // Built-in varyings obey special rules
+        if (input->isBuiltIn())
+        {
+            continue;
+        }
+
+        for (size_t vertVaryingIndex = 0; vertVaryingIndex < vertexVaryings.size(); vertVaryingIndex++)
         {
+            PackedVarying *output = &vertexVaryings[vertVaryingIndex];
             if (output->name == input->name)
             {
-                if (output->type != input->type || output->size != input->size)
+                if (!linkValidateVaryings(infoLog, output->name, *input, *output))
                 {
-                    infoLog.append("Type of vertex varying %s does not match that of the fragment varying", output->name.c_str());
-
                     return false;
                 }
 
-                output->reg = input->reg;
-                output->col = input->col;
+                output->registerIndex = input->registerIndex;
+                output->columnIndex = input->columnIndex;
 
                 matched = true;
                 break;
             }
         }
 
-        if (!matched)
+        // We permit unmatched, unreferenced varyings
+        if (!matched && input->staticUse)
         {
             infoLog.append("Fragment varying %s does not match any vertex varying", input->name.c_str());
-
             return false;
         }
     }
 
-    mUsesPointSize = vertexShader->mUsesPointSize;
-    std::string varyingSemantic = (mUsesPointSize && shaderModel == 3) ? "COLOR" : "TEXCOORD";
-    std::string targetSemantic = (shaderModel >= 4) ? "SV_Target" : "COLOR";
-    std::string positionSemantic = (shaderModel >= 4) ? "SV_Position" : "POSITION";
-    std::string depthSemantic = (shaderModel >= 4) ? "SV_Depth" : "DEPTH";
-
-    // special varyings that use reserved registers
-    int reservedRegisterIndex = registers;
-    std::string fragCoordSemantic;
-    std::string pointCoordSemantic;
-
-    if (fragmentShader->mUsesFragCoord)
-    {
-        fragCoordSemantic = varyingSemantic + str(reservedRegisterIndex++);
-    }
-
-    if (fragmentShader->mUsesPointCoord)
-    {
-        // Shader model 3 uses a special TEXCOORD semantic for point sprite texcoords.
-        // In DX11 we compute this in the GS.
-        if (shaderModel == 3)
-        {
-            pointCoordSemantic = "TEXCOORD0";
-        }
-        else if (shaderModel >= 4)
-        {
-            pointCoordSemantic = varyingSemantic + str(reservedRegisterIndex++); 
-        }
-    }
-
-    vertexHLSL += "struct VS_INPUT\n"
-                  "{\n";
-
-    int semanticIndex = 0;
-    for (AttributeArray::iterator attribute = vertexShader->mAttributes.begin(); attribute != vertexShader->mAttributes.end(); attribute++)
-    {
-        switch (attribute->type)
-        {
-          case GL_FLOAT:      vertexHLSL += "    float ";    break;
-          case GL_FLOAT_VEC2: vertexHLSL += "    float2 ";   break;
-          case GL_FLOAT_VEC3: vertexHLSL += "    float3 ";   break;
-          case GL_FLOAT_VEC4: vertexHLSL += "    float4 ";   break;
-          case GL_FLOAT_MAT2: vertexHLSL += "    float2x2 "; break;
-          case GL_FLOAT_MAT3: vertexHLSL += "    float3x3 "; break;
-          case GL_FLOAT_MAT4: vertexHLSL += "    float4x4 "; break;
-          default:  UNREACHABLE();
-        }
+    return true;
+}
 
-        vertexHLSL += decorateAttribute(attribute->name) + " : TEXCOORD" + str(semanticIndex) + ";\n";
+bool ProgramBinary::load(InfoLog &infoLog, GLenum binaryFormat, const void *binary, GLsizei length)
+{
+#ifdef ANGLE_DISABLE_PROGRAM_BINARY_LOAD
+    return false;
+#else
+    ASSERT(binaryFormat == mProgram->getBinaryFormat());
 
-        semanticIndex += VariableRowCount(attribute->type);
-    }
+    reset();
 
-    vertexHLSL += "};\n"
-                  "\n"
-                  "struct VS_OUTPUT\n"
-                  "{\n";
+    BinaryInputStream stream(binary, length);
 
-    if (shaderModel < 4)
+    GLenum format = stream.readInt<GLenum>();
+    if (format != mProgram->getBinaryFormat())
     {
-        vertexHLSL += "    float4 gl_Position : " + positionSemantic + ";\n";
+        infoLog.append("Invalid program binary format.");
+        return false;
     }
 
-    for (int r = 0; r < registers; r++)
+    int majorVersion = stream.readInt<int>();
+    int minorVersion = stream.readInt<int>();
+    if (majorVersion != ANGLE_MAJOR_VERSION || minorVersion != ANGLE_MINOR_VERSION)
     {
-        int registerSize = packing[r][3] ? 4 : (packing[r][2] ? 3 : (packing[r][1] ? 2 : 1));
-
-        vertexHLSL += "    float" + str(registerSize) + " v" + str(r) + " : " + varyingSemantic + str(r) + ";\n";
+        infoLog.append("Invalid program binary version.");
+        return false;
     }
 
-    if (fragmentShader->mUsesFragCoord)
+    unsigned char commitString[ANGLE_COMMIT_HASH_SIZE];
+    stream.readBytes(commitString, ANGLE_COMMIT_HASH_SIZE);
+    if (memcmp(commitString, ANGLE_COMMIT_HASH, sizeof(unsigned char) * ANGLE_COMMIT_HASH_SIZE) != 0)
     {
-        vertexHLSL += "    float4 gl_FragCoord : " + fragCoordSemantic + ";\n";
+        infoLog.append("Invalid program binary version.");
+        return false;
     }
 
-    if (vertexShader->mUsesPointSize && shaderModel >= 3)
+    int compileFlags = stream.readInt<int>();
+    if (compileFlags != ANGLE_COMPILE_OPTIMIZATION_LEVEL)
     {
-        vertexHLSL += "    float gl_PointSize : PSIZE;\n";
+        infoLog.append("Mismatched compilation flags.");
+        return false;
     }
 
-    if (shaderModel >= 4)
+    for (int i = 0; i < MAX_VERTEX_ATTRIBS; ++i)
     {
-        vertexHLSL += "    float4 gl_Position : " + positionSemantic + ";\n";
+        stream.readInt(&mLinkedAttribute[i].type);
+        stream.readString(&mLinkedAttribute[i].name);
+        stream.readInt(&mShaderAttributes[i].type);
+        stream.readString(&mShaderAttributes[i].name);
+        stream.readInt(&mSemanticIndex[i]);
     }
 
-    vertexHLSL += "};\n"
-                  "\n"
-                  "VS_OUTPUT main(VS_INPUT input)\n"
-                  "{\n";
-
-    for (AttributeArray::iterator attribute = vertexShader->mAttributes.begin(); attribute != vertexShader->mAttributes.end(); attribute++)
-    {
-        vertexHLSL += "    " + decorateAttribute(attribute->name) + " = ";
-
-        if (VariableRowCount(attribute->type) > 1)   // Matrix
-        {
-            vertexHLSL += "transpose";
-        }
-
-        vertexHLSL += "(input." + decorateAttribute(attribute->name) + ");\n";
-    }
+    initAttributesByLayout();
 
-    if (shaderModel >= 4)
+    const unsigned int psSamplerCount = stream.readInt<unsigned int>();
+    for (unsigned int i = 0; i < psSamplerCount; ++i)
     {
-        vertexHLSL += "\n"
-                      "    gl_main();\n"
-                      "\n"
-                      "    VS_OUTPUT output;\n"
-                      "    output.gl_Position.x = gl_Position.x;\n"
-                      "    output.gl_Position.y = -gl_Position.y;\n"
-                      "    output.gl_Position.z = (gl_Position.z + gl_Position.w) * 0.5;\n"
-                      "    output.gl_Position.w = gl_Position.w;\n";
+        Sampler sampler;
+        stream.readBool(&sampler.active);
+        stream.readInt(&sampler.logicalTextureUnit);
+        stream.readInt(&sampler.textureType);
+        mSamplersPS.push_back(sampler);
     }
-    else
+    const unsigned int vsSamplerCount = stream.readInt<unsigned int>();
+    for (unsigned int i = 0; i < vsSamplerCount; ++i)
     {
-        vertexHLSL += "\n"
-                      "    gl_main();\n"
-                      "\n"
-                      "    VS_OUTPUT output;\n"
-                      "    output.gl_Position.x = gl_Position.x * dx_ViewAdjust.z + dx_ViewAdjust.x * gl_Position.w;\n"
-                      "    output.gl_Position.y = -(gl_Position.y * dx_ViewAdjust.w + dx_ViewAdjust.y * gl_Position.w);\n"
-                      "    output.gl_Position.z = (gl_Position.z + gl_Position.w) * 0.5;\n"
-                      "    output.gl_Position.w = gl_Position.w;\n";
+        Sampler sampler;
+        stream.readBool(&sampler.active);
+        stream.readInt(&sampler.logicalTextureUnit);
+        stream.readInt(&sampler.textureType);
+        mSamplersVS.push_back(sampler);
     }
 
-    if (vertexShader->mUsesPointSize && shaderModel >= 3)
-    {
-        vertexHLSL += "    output.gl_PointSize = gl_PointSize;\n";
-    }
+    stream.readInt(&mUsedVertexSamplerRange);
+    stream.readInt(&mUsedPixelSamplerRange);
+    stream.readBool(&mUsesPointSize);
+    stream.readInt(&mShaderVersion);
 
-    if (fragmentShader->mUsesFragCoord)
+    const unsigned int uniformCount = stream.readInt<unsigned int>();
+    if (stream.error())
     {
-        vertexHLSL += "    output.gl_FragCoord = gl_Position;\n";
+        infoLog.append("Invalid program binary.");
+        return false;
     }
 
-    for (VaryingList::iterator varying = vertexShader->mVaryings.begin(); varying != vertexShader->mVaryings.end(); varying++)
+    mUniforms.resize(uniformCount);
+    for (unsigned int uniformIndex = 0; uniformIndex < uniformCount; uniformIndex++)
     {
-        if (varying->reg >= 0)
-        {
-            for (int i = 0; i < varying->size; i++)
-            {
-                int rows = VariableRowCount(varying->type);
+        GLenum type = stream.readInt<GLenum>();
+        GLenum precision = stream.readInt<GLenum>();
+        std::string name = stream.readString();
+        unsigned int arraySize = stream.readInt<unsigned int>();
+        int blockIndex = stream.readInt<int>();
 
-                for (int j = 0; j < rows; j++)
-                {
-                    int r = varying->reg + i * rows + j;
-                    vertexHLSL += "    output.v" + str(r);
+        int offset = stream.readInt<int>();
+        int arrayStride = stream.readInt<int>();
+        int matrixStride = stream.readInt<int>();
+        bool isRowMajorMatrix = stream.readBool();
 
-                    bool sharedRegister = false;   // Register used by multiple varyings
-                    
-                    for (int x = 0; x < 4; x++)
-                    {
-                        if (packing[r][x] && packing[r][x] != packing[r][0])
-                        {
-                            sharedRegister = true;
-                            break;
-                        }
-                    }
-
-                    if(sharedRegister)
-                    {
-                        vertexHLSL += ".";
+        const sh::BlockMemberInfo blockInfo(offset, arrayStride, matrixStride, isRowMajorMatrix);
 
-                        for (int x = 0; x < 4; x++)
-                        {
-                            if (packing[r][x] == &*varying)
-                            {
-                                switch(x)
-                                {
-                                  case 0: vertexHLSL += "x"; break;
-                                  case 1: vertexHLSL += "y"; break;
-                                  case 2: vertexHLSL += "z"; break;
-                                  case 3: vertexHLSL += "w"; break;
-                                }
-                            }
-                        }
-                    }
+        LinkedUniform *uniform = new LinkedUniform(type, precision, name, arraySize, blockIndex, blockInfo);
 
-                    vertexHLSL += " = " + varying->name;
-                    
-                    if (varying->array)
-                    {
-                        vertexHLSL += "[" + str(i) + "]";
-                    }
+        stream.readInt(&uniform->psRegisterIndex);
+        stream.readInt(&uniform->vsRegisterIndex);
+        stream.readInt(&uniform->registerCount);
+        stream.readInt(&uniform->registerElement);
 
-                    if (rows > 1)
-                    {
-                        vertexHLSL += "[" + str(j) + "]";
-                    }
-                    
-                    vertexHLSL += ";\n";
-                }
-            }
-        }
+        mUniforms[uniformIndex] = uniform;
     }
 
-    vertexHLSL += "\n"
-                  "    return output;\n"
-                  "}\n";
+    unsigned int uniformBlockCount = stream.readInt<unsigned int>();
+    if (stream.error())
+    {
+        infoLog.append("Invalid program binary.");
+        return false;
+    }
 
-    pixelHLSL += "struct PS_INPUT\n"
-                 "{\n";
-    
-    for (VaryingList::iterator varying = fragmentShader->mVaryings.begin(); varying != fragmentShader->mVaryings.end(); varying++)
+    mUniformBlocks.resize(uniformBlockCount);
+    for (unsigned int uniformBlockIndex = 0; uniformBlockIndex < uniformBlockCount; ++uniformBlockIndex)
     {
-        if (varying->reg >= 0)
+        std::string name = stream.readString();
+        unsigned int elementIndex = stream.readInt<unsigned int>();
+        unsigned int dataSize = stream.readInt<unsigned int>();
+
+        UniformBlock *uniformBlock = new UniformBlock(name, elementIndex, dataSize);
+
+        stream.readInt(&uniformBlock->psRegisterIndex);
+        stream.readInt(&uniformBlock->vsRegisterIndex);
+
+        unsigned int numMembers = stream.readInt<unsigned int>();
+        uniformBlock->memberUniformIndexes.resize(numMembers);
+        for (unsigned int blockMemberIndex = 0; blockMemberIndex < numMembers; blockMemberIndex++)
         {
-            for (int i = 0; i < varying->size; i++)
-            {
-                int rows = VariableRowCount(varying->type);
-                for (int j = 0; j < rows; j++)
-                {
-                    std::string n = str(varying->reg + i * rows + j);
-                    pixelHLSL += "    float" + str(VariableColumnCount(varying->type)) + " v" + n + " : " + varyingSemantic + n + ";\n";
-                }
-            }
+            stream.readInt(&uniformBlock->memberUniformIndexes[blockMemberIndex]);
         }
-        else UNREACHABLE();
+
+        mUniformBlocks[uniformBlockIndex] = uniformBlock;
     }
 
-    if (fragmentShader->mUsesFragCoord)
+    const unsigned int uniformIndexCount = stream.readInt<unsigned int>();
+    if (stream.error())
     {
-        pixelHLSL += "    float4 gl_FragCoord : " + fragCoordSemantic + ";\n";
+        infoLog.append("Invalid program binary.");
+        return false;
     }
-        
-    if (fragmentShader->mUsesPointCoord && shaderModel >= 3)
+
+    mUniformIndex.resize(uniformIndexCount);
+    for (unsigned int uniformIndexIndex = 0; uniformIndexIndex < uniformIndexCount; uniformIndexIndex++)
     {
-        pixelHLSL += "    float2 gl_PointCoord : " + pointCoordSemantic + ";\n";
+        stream.readString(&mUniformIndex[uniformIndexIndex].name);
+        stream.readInt(&mUniformIndex[uniformIndexIndex].element);
+        stream.readInt(&mUniformIndex[uniformIndexIndex].index);
     }
 
-    // Must consume the PSIZE element if the geometry shader is not active
-    // We won't know if we use a GS until we draw
-    if (vertexShader->mUsesPointSize && shaderModel >= 4)
+    stream.readInt(&mTransformFeedbackBufferMode);
+    const unsigned int transformFeedbackVaryingCount = stream.readInt<unsigned int>();
+    mTransformFeedbackLinkedVaryings.resize(transformFeedbackVaryingCount);
+    for (unsigned int varyingIndex = 0; varyingIndex < transformFeedbackVaryingCount; varyingIndex++)
     {
-        pixelHLSL += "    float gl_PointSize : PSIZE;\n";
+        LinkedVarying &varying = mTransformFeedbackLinkedVaryings[varyingIndex];
+
+        stream.readString(&varying.name);
+        stream.readInt(&varying.type);
+        stream.readInt(&varying.size);
+        stream.readString(&varying.semanticName);
+        stream.readInt(&varying.semanticIndex);
+        stream.readInt(&varying.semanticIndexCount);
     }
 
-    if (fragmentShader->mUsesFragCoord)
+    const unsigned int vertexShaderCount = stream.readInt<unsigned int>();
+    for (unsigned int vertexShaderIndex = 0; vertexShaderIndex < vertexShaderCount; vertexShaderIndex++)
     {
-        if (shaderModel >= 4)
+        VertexFormat inputLayout[MAX_VERTEX_ATTRIBS];
+
+        for (size_t inputIndex = 0; inputIndex < MAX_VERTEX_ATTRIBS; inputIndex++)
         {
-            pixelHLSL += "    float4 dx_VPos : SV_Position;\n";
+            VertexFormat *vertexInput = &inputLayout[inputIndex];
+            stream.readInt(&vertexInput->mType);
+            stream.readInt(&vertexInput->mNormalized);
+            stream.readInt(&vertexInput->mComponents);
+            stream.readBool(&vertexInput->mPureInteger);
         }
-        else if (shaderModel >= 3)
+
+        unsigned int vertexShaderSize = stream.readInt<unsigned int>();
+        const unsigned char *vertexShaderFunction = reinterpret_cast<const unsigned char*>(binary) + stream.offset();
+        rx::ShaderExecutable *shaderExecutable = mProgram->getRenderer()->loadExecutable(reinterpret_cast<const DWORD*>(vertexShaderFunction),
+                                                                           vertexShaderSize, rx::SHADER_VERTEX,
+                                                                           mTransformFeedbackLinkedVaryings,
+                                                                           (mTransformFeedbackBufferMode == GL_SEPARATE_ATTRIBS));
+        if (!shaderExecutable)
         {
-            pixelHLSL += "    float2 dx_VPos : VPOS;\n";
+            infoLog.append("Could not create vertex shader.");
+            return false;
         }
-    }
 
-    pixelHLSL += "};\n"
-                 "\n"
-                 "struct PS_OUTPUT\n"
-                 "{\n";
+        // generated converted input layout
+        GLenum signature[MAX_VERTEX_ATTRIBS];
+        mProgram->getDynamicHLSL()->getInputLayoutSignature(inputLayout, signature);
 
-    for (unsigned int renderTargetIndex = 0; renderTargetIndex < numRenderTargets; renderTargetIndex++)
-    {
-        pixelHLSL += "    float4 gl_Color" + str(renderTargetIndex) + " : " + targetSemantic + str(renderTargetIndex) + ";\n";
-    }
+        // add new binary
+        mVertexExecutables.push_back(new VertexExecutable(inputLayout, signature, shaderExecutable));
 
-    if (fragmentShader->mUsesFragDepth)
-    {
-        pixelHLSL += "    float gl_Depth : " + depthSemantic + ";\n";
+        stream.skip(vertexShaderSize);
     }
 
-    pixelHLSL += "};\n"
-                 "\n";
-
-    if (fragmentShader->mUsesFrontFacing)
+    const size_t pixelShaderCount = stream.readInt<unsigned int>();
+    for (size_t pixelShaderIndex = 0; pixelShaderIndex < pixelShaderCount; pixelShaderIndex++)
     {
-        if (shaderModel >= 4)
-        {
-            pixelHLSL += "PS_OUTPUT main(PS_INPUT input, bool isFrontFace : SV_IsFrontFace)\n"
-                         "{\n";
-        }
-        else
+        const size_t outputCount = stream.readInt<unsigned int>();
+        std::vector<GLenum> outputs(outputCount);
+        for (size_t outputIndex = 0; outputIndex < outputCount; outputIndex++)
         {
-            pixelHLSL += "PS_OUTPUT main(PS_INPUT input, float vFace : VFACE)\n"
-                         "{\n";
+            stream.readInt(&outputs[outputIndex]);
         }
-    }
-    else
-    {
-        pixelHLSL += "PS_OUTPUT main(PS_INPUT input)\n"
-                     "{\n";
-    }
 
-    if (fragmentShader->mUsesFragCoord)
-    {
-        pixelHLSL += "    float rhw = 1.0 / input.gl_FragCoord.w;\n";
-        
-        if (shaderModel >= 4)
-        {
-            pixelHLSL += "    gl_FragCoord.x = input.dx_VPos.x;\n"
-                         "    gl_FragCoord.y = input.dx_VPos.y;\n";
-        }
-        else if (shaderModel >= 3)
-        {
-            pixelHLSL += "    gl_FragCoord.x = input.dx_VPos.x + 0.5;\n"
-                         "    gl_FragCoord.y = input.dx_VPos.y + 0.5;\n";
-        }
-        else
+        const size_t pixelShaderSize = stream.readInt<unsigned int>();
+        const unsigned char *pixelShaderFunction = reinterpret_cast<const unsigned char*>(binary) + stream.offset();
+        rx::Renderer *renderer = mProgram->getRenderer();
+        rx::ShaderExecutable *shaderExecutable = renderer->loadExecutable(pixelShaderFunction, pixelShaderSize,
+                                                                          rx::SHADER_PIXEL, mTransformFeedbackLinkedVaryings,
+                                                                          (mTransformFeedbackBufferMode == GL_SEPARATE_ATTRIBS));
+
+        if (!shaderExecutable)
         {
-            // dx_ViewCoords contains the viewport width/2, height/2, center.x and center.y. See Renderer::setViewport()
-            pixelHLSL += "    gl_FragCoord.x = (input.gl_FragCoord.x * rhw) * dx_ViewCoords.x + dx_ViewCoords.z;\n"
-                         "    gl_FragCoord.y = (input.gl_FragCoord.y * rhw) * dx_ViewCoords.y + dx_ViewCoords.w;\n";
+            infoLog.append("Could not create pixel shader.");
+            return false;
         }
-        
-        pixelHLSL += "    gl_FragCoord.z = (input.gl_FragCoord.z * rhw) * dx_DepthFront.x + dx_DepthFront.y;\n"
-                     "    gl_FragCoord.w = rhw;\n";
-    }
 
-    if (fragmentShader->mUsesPointCoord && shaderModel >= 3)
-    {
-        pixelHLSL += "    gl_PointCoord.x = input.gl_PointCoord.x;\n";
-        pixelHLSL += "    gl_PointCoord.y = 1.0 - input.gl_PointCoord.y;\n";
+        // add new binary
+        mPixelExecutables.push_back(new PixelExecutable(outputs, shaderExecutable));
+
+        stream.skip(pixelShaderSize);
     }
 
-    if (fragmentShader->mUsesFrontFacing)
+    unsigned int geometryShaderSize = stream.readInt<unsigned int>();
+
+    if (geometryShaderSize > 0)
     {
-        if (shaderModel <= 3)
-        {
-            pixelHLSL += "    gl_FrontFacing = (vFace * dx_DepthFront.z >= 0.0);\n";
-        }
-        else
+        const char *geometryShaderFunction = (const char*) binary + stream.offset();
+        rx::Renderer *renderer = mProgram->getRenderer();
+        mGeometryExecutable = renderer->loadExecutable(reinterpret_cast<const DWORD*>(geometryShaderFunction),
+                                                       geometryShaderSize, rx::SHADER_GEOMETRY, mTransformFeedbackLinkedVaryings,
+                                                       (mTransformFeedbackBufferMode == GL_SEPARATE_ATTRIBS));
+
+        if (!mGeometryExecutable)
         {
-            pixelHLSL += "    gl_FrontFacing = isFrontFace;\n";
+            infoLog.append("Could not create geometry shader.");
+            return false;
         }
+        stream.skip(geometryShaderSize);
     }
 
-    for (VaryingList::iterator varying = fragmentShader->mVaryings.begin(); varying != fragmentShader->mVaryings.end(); varying++)
+    if (!mProgram->load(infoLog, &stream))
     {
-        if (varying->reg >= 0)
-        {
-            for (int i = 0; i < varying->size; i++)
-            {
-                int rows = VariableRowCount(varying->type);
-                for (int j = 0; j < rows; j++)
-                {
-                    std::string n = str(varying->reg + i * rows + j);
-                    pixelHLSL += "    " + varying->name;
-
-                    if (varying->array)
-                    {
-                        pixelHLSL += "[" + str(i) + "]";
-                    }
-
-                    if (rows > 1)
-                    {
-                        pixelHLSL += "[" + str(j) + "]";
-                    }
-
-                    switch (VariableColumnCount(varying->type))
-                    {
-                      case 1: pixelHLSL += " = input.v" + n + ".x;\n";   break;
-                      case 2: pixelHLSL += " = input.v" + n + ".xy;\n";  break;
-                      case 3: pixelHLSL += " = input.v" + n + ".xyz;\n"; break;
-                      case 4: pixelHLSL += " = input.v" + n + ";\n";     break;
-                      default: UNREACHABLE();
-                    }
-                }
-            }
-        }
-        else UNREACHABLE();
+        return false;
     }
 
-    pixelHLSL += "\n"
-                 "    gl_main();\n"
-                 "\n"
-                 "    PS_OUTPUT output;\n";
-
-    for (unsigned int renderTargetIndex = 0; renderTargetIndex < numRenderTargets; renderTargetIndex++)
-    {
-        unsigned int sourceColorIndex = broadcast ? 0 : renderTargetIndex;
+    const char *ptr = (const char*) binary + stream.offset();
 
-        pixelHLSL += "    output.gl_Color" + str(renderTargetIndex) + " = gl_Color[" + str(sourceColorIndex) + "];\n";
-    }
+    const GUID *binaryIdentifier = (const GUID *) ptr;
+    ptr += sizeof(GUID);
 
-    if (fragmentShader->mUsesFragDepth)
+    GUID identifier = mProgram->getRenderer()->getAdapterIdentifier();
+    if (memcmp(&identifier, binaryIdentifier, sizeof(GUID)) != 0)
     {
-        pixelHLSL += "    output.gl_Depth = gl_Depth;\n";
+        infoLog.append("Invalid program binary.");
+        return false;
     }
 
-    pixelHLSL += "\n"
-                 "    return output;\n"
-                 "}\n";
+    mProgram->initializeUniformStorage(mUniforms);
 
     return true;
+#endif // #ifdef ANGLE_DISABLE_PROGRAM_BINARY_LOAD
 }
 
-bool ProgramBinary::load(InfoLog &infoLog, const void *binary, GLsizei length)
+bool ProgramBinary::save(GLenum *binaryFormat, void *binary, GLsizei bufSize, GLsizei *length)
 {
-    BinaryInputStream stream(binary, length);
-
-    int format = 0;
-    stream.read(&format);
-    if (format != GL_PROGRAM_BINARY_ANGLE)
+    if (binaryFormat)
     {
-        infoLog.append("Invalid program binary format.");
-        return false;
+        *binaryFormat = mProgram->getBinaryFormat();
     }
 
-    int majorVersion = 0;
-    int minorVersion = 0;
-    stream.read(&majorVersion);
-    stream.read(&minorVersion);
-    if (majorVersion != ANGLE_MAJOR_VERSION || minorVersion != ANGLE_MINOR_VERSION)
-    {
-        infoLog.append("Invalid program binary version.");
-        return false;
-    }
+    BinaryOutputStream stream;
 
-#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-    unsigned char commitString[ANGLE_COMMIT_HASH_SIZE];
-    stream.read(commitString, ANGLE_COMMIT_HASH_SIZE);
-    if (memcmp(commitString, ANGLE_COMMIT_HASH, sizeof(unsigned char) * ANGLE_COMMIT_HASH_SIZE) != 0)
+    stream.writeInt(mProgram->getBinaryFormat());
+    stream.writeInt(ANGLE_MAJOR_VERSION);
+    stream.writeInt(ANGLE_MINOR_VERSION);
+    stream.writeBytes(reinterpret_cast<const unsigned char*>(ANGLE_COMMIT_HASH), ANGLE_COMMIT_HASH_SIZE);
+    stream.writeInt(ANGLE_COMPILE_OPTIMIZATION_LEVEL);
+
+    for (unsigned int i = 0; i < MAX_VERTEX_ATTRIBS; ++i)
     {
-        infoLog.append("Invalid program binary version.");
-        return false;
+        stream.writeInt(mLinkedAttribute[i].type);
+        stream.writeString(mLinkedAttribute[i].name);
+        stream.writeInt(mShaderAttributes[i].type);
+        stream.writeString(mShaderAttributes[i].name);
+        stream.writeInt(mSemanticIndex[i]);
     }
 
-    int compileFlags = 0;
-    stream.read(&compileFlags);
-    if (compileFlags != ANGLE_COMPILE_OPTIMIZATION_LEVEL)
+    stream.writeInt(mSamplersPS.size());
+    for (unsigned int i = 0; i < mSamplersPS.size(); ++i)
     {
-        infoLog.append("Mismatched compilation flags.");
-        return false;
+        stream.writeInt(mSamplersPS[i].active);
+        stream.writeInt(mSamplersPS[i].logicalTextureUnit);
+        stream.writeInt(mSamplersPS[i].textureType);
     }
-#endif
 
-    for (int i = 0; i < MAX_VERTEX_ATTRIBS; ++i)
+    stream.writeInt(mSamplersVS.size());
+    for (unsigned int i = 0; i < mSamplersVS.size(); ++i)
     {
-        stream.read(&mLinkedAttribute[i].type);
-        std::string name;
-        stream.read(&name);
-        mLinkedAttribute[i].name = name;
-        stream.read(&mSemanticIndex[i]);
+        stream.writeInt(mSamplersVS[i].active);
+        stream.writeInt(mSamplersVS[i].logicalTextureUnit);
+        stream.writeInt(mSamplersVS[i].textureType);
     }
 
-    initAttributesByLayout();
+    stream.writeInt(mUsedVertexSamplerRange);
+    stream.writeInt(mUsedPixelSamplerRange);
+    stream.writeInt(mUsesPointSize);
+    stream.writeInt(mShaderVersion);
 
-    for (unsigned int i = 0; i < MAX_TEXTURE_IMAGE_UNITS; ++i)
+    stream.writeInt(mUniforms.size());
+    for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); ++uniformIndex)
     {
-        stream.read(&mSamplersPS[i].active);
-        stream.read(&mSamplersPS[i].logicalTextureUnit);
-        
-        int textureType;
-        stream.read(&textureType);
-        mSamplersPS[i].textureType = (TextureType) textureType;
-    }
+        const LinkedUniform &uniform = *mUniforms[uniformIndex];
 
-    for (unsigned int i = 0; i < IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS; ++i)
-    {
-        stream.read(&mSamplersVS[i].active);
-        stream.read(&mSamplersVS[i].logicalTextureUnit);
-        
-        int textureType;
-        stream.read(&textureType);
-        mSamplersVS[i].textureType = (TextureType) textureType;
-    }
+        stream.writeInt(uniform.type);
+        stream.writeInt(uniform.precision);
+        stream.writeString(uniform.name);
+        stream.writeInt(uniform.arraySize);
+        stream.writeInt(uniform.blockIndex);
 
-    stream.read(&mUsedVertexSamplerRange);
-    stream.read(&mUsedPixelSamplerRange);
-    stream.read(&mUsesPointSize);
+        stream.writeInt(uniform.blockInfo.offset);
+        stream.writeInt(uniform.blockInfo.arrayStride);
+        stream.writeInt(uniform.blockInfo.matrixStride);
+        stream.writeInt(uniform.blockInfo.isRowMajorMatrix);
 
-    size_t size;
-    stream.read(&size);
-    if (stream.error())
-    {
-        infoLog.append("Invalid program binary.");
-        return false;
+        stream.writeInt(uniform.psRegisterIndex);
+        stream.writeInt(uniform.vsRegisterIndex);
+        stream.writeInt(uniform.registerCount);
+        stream.writeInt(uniform.registerElement);
     }
 
-    mUniforms.resize(size);
-    for (unsigned int i = 0; i < size; ++i)
+    stream.writeInt(mUniformBlocks.size());
+    for (size_t uniformBlockIndex = 0; uniformBlockIndex < mUniformBlocks.size(); ++uniformBlockIndex)
     {
-        GLenum type;
-        GLenum precision;
-        std::string name;
-        unsigned int arraySize;
+        const UniformBlock& uniformBlock = *mUniformBlocks[uniformBlockIndex];
 
-        stream.read(&type);
-        stream.read(&precision);
-        stream.read(&name);
-        stream.read(&arraySize);
+        stream.writeString(uniformBlock.name);
+        stream.writeInt(uniformBlock.elementIndex);
+        stream.writeInt(uniformBlock.dataSize);
 
-        mUniforms[i] = new Uniform(type, precision, name, arraySize);
-        
-        stream.read(&mUniforms[i]->psRegisterIndex);
-        stream.read(&mUniforms[i]->vsRegisterIndex);
-        stream.read(&mUniforms[i]->registerCount);
-    }
+        stream.writeInt(uniformBlock.memberUniformIndexes.size());
+        for (unsigned int blockMemberIndex = 0; blockMemberIndex < uniformBlock.memberUniformIndexes.size(); blockMemberIndex++)
+        {
+            stream.writeInt(uniformBlock.memberUniformIndexes[blockMemberIndex]);
+        }
 
-    stream.read(&size);
-    if (stream.error())
-    {
-        infoLog.append("Invalid program binary.");
-        return false;
+        stream.writeInt(uniformBlock.psRegisterIndex);
+        stream.writeInt(uniformBlock.vsRegisterIndex);
     }
 
-    mUniformIndex.resize(size);
-    for (unsigned int i = 0; i < size; ++i)
+    stream.writeInt(mUniformIndex.size());
+    for (size_t i = 0; i < mUniformIndex.size(); ++i)
     {
-        stream.read(&mUniformIndex[i].name);
-        stream.read(&mUniformIndex[i].element);
-        stream.read(&mUniformIndex[i].index);
+        stream.writeString(mUniformIndex[i].name);
+        stream.writeInt(mUniformIndex[i].element);
+        stream.writeInt(mUniformIndex[i].index);
     }
 
-    unsigned int pixelShaderSize;
-    stream.read(&pixelShaderSize);
-
-    unsigned int vertexShaderSize;
-    stream.read(&vertexShaderSize);
-
-    unsigned int geometryShaderSize;
-    stream.read(&geometryShaderSize);
-
-    const char *ptr = (const char*) binary + stream.offset();
-
-#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-    const GUID *binaryIdentifier = (const GUID *) ptr;
-    ptr += sizeof(GUID);
-
-    GUID identifier = mRenderer->getAdapterIdentifier();
-    if (memcmp(&identifier, binaryIdentifier, sizeof(GUID)) != 0)
+    stream.writeInt(mTransformFeedbackBufferMode);
+    stream.writeInt(mTransformFeedbackLinkedVaryings.size());
+    for (size_t i = 0; i < mTransformFeedbackLinkedVaryings.size(); i++)
     {
-        infoLog.append("Invalid program binary.");
-        return false;
+        const LinkedVarying &varying = mTransformFeedbackLinkedVaryings[i];
+
+        stream.writeString(varying.name);
+        stream.writeInt(varying.type);
+        stream.writeInt(varying.size);
+        stream.writeString(varying.semanticName);
+        stream.writeInt(varying.semanticIndex);
+        stream.writeInt(varying.semanticIndexCount);
     }
-#endif
 
-    const char *pixelShaderFunction = ptr;
-    ptr += pixelShaderSize;
+    stream.writeInt(mVertexExecutables.size());
+    for (size_t vertexExecutableIndex = 0; vertexExecutableIndex < mVertexExecutables.size(); vertexExecutableIndex++)
+    {
+        VertexExecutable *vertexExecutable = mVertexExecutables[vertexExecutableIndex];
 
-    const char *vertexShaderFunction = ptr;
-    ptr += vertexShaderSize;
+        for (size_t inputIndex = 0; inputIndex < gl::MAX_VERTEX_ATTRIBS; inputIndex++)
+        {
+            const VertexFormat &vertexInput = vertexExecutable->inputs()[inputIndex];
+            stream.writeInt(vertexInput.mType);
+            stream.writeInt(vertexInput.mNormalized);
+            stream.writeInt(vertexInput.mComponents);
+            stream.writeInt(vertexInput.mPureInteger);
+        }
 
-    const char *geometryShaderFunction = geometryShaderSize > 0 ? ptr : NULL;
-    ptr += geometryShaderSize;
+        size_t vertexShaderSize = vertexExecutable->shaderExecutable()->getLength();
+        stream.writeInt(vertexShaderSize);
 
-    mPixelExecutable = mRenderer->loadExecutable(reinterpret_cast<const DWORD*>(pixelShaderFunction),
-                                                 pixelShaderSize, rx::SHADER_PIXEL);
-    if (!mPixelExecutable)
-    {
-        infoLog.append("Could not create pixel shader.");
-        return false;
+        const uint8_t *vertexBlob = vertexExecutable->shaderExecutable()->getFunction();
+        stream.writeBytes(vertexBlob, vertexShaderSize);
     }
 
-    mVertexExecutable = mRenderer->loadExecutable(reinterpret_cast<const DWORD*>(vertexShaderFunction),
-                                                  vertexShaderSize, rx::SHADER_VERTEX);
-    if (!mVertexExecutable)
+    stream.writeInt(mPixelExecutables.size());
+    for (size_t pixelExecutableIndex = 0; pixelExecutableIndex < mPixelExecutables.size(); pixelExecutableIndex++)
     {
-        infoLog.append("Could not create vertex shader.");
-        delete mPixelExecutable;
-        mPixelExecutable = NULL;
-        return false;
-    }
+        PixelExecutable *pixelExecutable = mPixelExecutables[pixelExecutableIndex];
 
-    if (geometryShaderFunction != NULL && geometryShaderSize > 0)
-    {
-        mGeometryExecutable = mRenderer->loadExecutable(reinterpret_cast<const DWORD*>(geometryShaderFunction),
-                                                        geometryShaderSize, rx::SHADER_GEOMETRY);
-        if (!mGeometryExecutable)
+        const std::vector<GLenum> outputs = pixelExecutable->outputSignature();
+        stream.writeInt(outputs.size());
+        for (size_t outputIndex = 0; outputIndex < outputs.size(); outputIndex++)
         {
-            infoLog.append("Could not create geometry shader.");
-            delete mPixelExecutable;
-            mPixelExecutable = NULL;
-            delete mVertexExecutable;
-            mVertexExecutable = NULL;
-            return false;
+            stream.writeInt(outputs[outputIndex]);
         }
-    }
-    else
-    {
-        mGeometryExecutable = NULL;
-    }
-
-    return true;
-}
 
-bool ProgramBinary::save(void* binary, GLsizei bufSize, GLsizei *length)
-{
-    BinaryOutputStream stream;
+        size_t pixelShaderSize = pixelExecutable->shaderExecutable()->getLength();
+        stream.writeInt(pixelShaderSize);
 
-    stream.write(GL_PROGRAM_BINARY_ANGLE);
-    stream.write(ANGLE_MAJOR_VERSION);
-    stream.write(ANGLE_MINOR_VERSION);
-#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-    stream.write(ANGLE_COMMIT_HASH, ANGLE_COMMIT_HASH_SIZE);
-    stream.write(ANGLE_COMPILE_OPTIMIZATION_LEVEL);
-#endif
-    for (unsigned int i = 0; i < MAX_VERTEX_ATTRIBS; ++i)
-    {
-        stream.write(mLinkedAttribute[i].type);
-        stream.write(mLinkedAttribute[i].name);
-        stream.write(mSemanticIndex[i]);
+        const uint8_t *pixelBlob = pixelExecutable->shaderExecutable()->getFunction();
+        stream.writeBytes(pixelBlob, pixelShaderSize);
     }
 
-    for (unsigned int i = 0; i < MAX_TEXTURE_IMAGE_UNITS; ++i)
-    {
-        stream.write(mSamplersPS[i].active);
-        stream.write(mSamplersPS[i].logicalTextureUnit);
-        stream.write((int) mSamplersPS[i].textureType);
-    }
+    size_t geometryShaderSize = (mGeometryExecutable != NULL) ? mGeometryExecutable->getLength() : 0;
+    stream.writeInt(geometryShaderSize);
 
-    for (unsigned int i = 0; i < IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS; ++i)
+    if (mGeometryExecutable != NULL && geometryShaderSize > 0)
     {
-        stream.write(mSamplersVS[i].active);
-        stream.write(mSamplersVS[i].logicalTextureUnit);
-        stream.write((int) mSamplersVS[i].textureType);
+        const uint8_t *geometryBlob = mGeometryExecutable->getFunction();
+        stream.writeBytes(geometryBlob, geometryShaderSize);
     }
 
-    stream.write(mUsedVertexSamplerRange);
-    stream.write(mUsedPixelSamplerRange);
-    stream.write(mUsesPointSize);
-
-    stream.write(mUniforms.size());
-    for (unsigned int i = 0; i < mUniforms.size(); ++i)
+    if (!mProgram->save(&stream))
     {
-        stream.write(mUniforms[i]->type);
-        stream.write(mUniforms[i]->precision);
-        stream.write(mUniforms[i]->name);
-        stream.write(mUniforms[i]->arraySize);
-
-        stream.write(mUniforms[i]->psRegisterIndex);
-        stream.write(mUniforms[i]->vsRegisterIndex);
-        stream.write(mUniforms[i]->registerCount);
-    }
+        if (length)
+        {
+            *length = 0;
+        }
 
-    stream.write(mUniformIndex.size());
-    for (unsigned int i = 0; i < mUniformIndex.size(); ++i)
-    {
-        stream.write(mUniformIndex[i].name);
-        stream.write(mUniformIndex[i].element);
-        stream.write(mUniformIndex[i].index);
+        return false;
     }
 
-    UINT pixelShaderSize = mPixelExecutable->getLength();
-    stream.write(pixelShaderSize);
-
-    UINT vertexShaderSize = mVertexExecutable->getLength();
-    stream.write(vertexShaderSize);
-
-    UINT geometryShaderSize = (mGeometryExecutable != NULL) ? mGeometryExecutable->getLength() : 0;
-    stream.write(geometryShaderSize);
-
-#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-    GUID identifier = mRenderer->getAdapterIdentifier();
-#endif
+    GUID identifier = mProgram->getRenderer()->getAdapterIdentifier();
 
     GLsizei streamLength = stream.length();
     const void *streamData = stream.data();
 
-    GLsizei totalLength = streamLength + sizeof(GUID) + pixelShaderSize + vertexShaderSize + geometryShaderSize;
+    GLsizei totalLength = streamLength + sizeof(GUID);
     if (totalLength > bufSize)
     {
         if (length)
@@ -1896,22 +1546,8 @@ bool ProgramBinary::save(void* binary, GLsizei bufSize, GLsizei *length)
         memcpy(ptr, streamData, streamLength);
         ptr += streamLength;
 
-#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
         memcpy(ptr, &identifier, sizeof(GUID));
         ptr += sizeof(GUID);
-#endif
-
-        memcpy(ptr, mPixelExecutable->getFunction(), pixelShaderSize);
-        ptr += pixelShaderSize;
-
-        memcpy(ptr, mVertexExecutable->getFunction(), vertexShaderSize);
-        ptr += vertexShaderSize;
-
-        if (mGeometryExecutable != NULL && geometryShaderSize > 0)
-        {
-            memcpy(ptr, mGeometryExecutable->getFunction(), geometryShaderSize);
-            ptr += geometryShaderSize;
-        }
 
         ASSERT(ptr - totalLength == binary);
     }
@@ -1927,7 +1563,7 @@ bool ProgramBinary::save(void* binary, GLsizei bufSize, GLsizei *length)
 GLint ProgramBinary::getLength()
 {
     GLint length;
-    if (save(NULL, INT_MAX, &length))
+    if (save(NULL, NULL, INT_MAX, &length))
     {
         return length;
     }
@@ -1937,77 +1573,98 @@ GLint ProgramBinary::getLength()
     }
 }
 
-bool ProgramBinary::link(InfoLog &infoLog, const AttributeBindings &attributeBindings, FragmentShader *fragmentShader, VertexShader *vertexShader)
+bool ProgramBinary::link(InfoLog &infoLog, const AttributeBindings &attributeBindings, Shader *fragmentShader, Shader *vertexShader,
+                         const std::vector<std::string>& transformFeedbackVaryings, GLenum transformFeedbackBufferMode, const Caps &caps)
 {
     if (!fragmentShader || !fragmentShader->isCompiled())
     {
         return false;
     }
+    ASSERT(fragmentShader->getType() == GL_FRAGMENT_SHADER);
 
     if (!vertexShader || !vertexShader->isCompiled())
     {
         return false;
     }
+    ASSERT(vertexShader->getType() == GL_VERTEX_SHADER);
 
-    std::string pixelHLSL = fragmentShader->getHLSL();
-    std::string vertexHLSL = vertexShader->getHLSL();
+    reset();
 
-    // Map the varyings to the register file
-    const Varying *packing[IMPLEMENTATION_MAX_VARYING_VECTORS][4] = {NULL};
-    int registers = packVaryings(infoLog, packing, fragmentShader);
+    mSamplersPS.resize(caps.maxTextureImageUnits);
+    mSamplersVS.resize(caps.maxVertexTextureImageUnits);
 
-    if (registers < 0)
-    {
-        return false;
-    }
+    mTransformFeedbackBufferMode = transformFeedbackBufferMode;
+
+    rx::ShaderD3D *vertexShaderD3D = rx::ShaderD3D::makeShaderD3D(vertexShader->getImplementation());
+    rx::ShaderD3D *fragmentShaderD3D = rx::ShaderD3D::makeShaderD3D(fragmentShader->getImplementation());
 
-    if (!linkVaryings(infoLog, registers, packing, pixelHLSL, vertexHLSL, fragmentShader, vertexShader))
+    mShaderVersion = vertexShaderD3D->getShaderVersion();
+
+    int registers;
+    std::vector<LinkedVarying> linkedVaryings;
+    if (!mProgram->link(infoLog, fragmentShader, vertexShader, transformFeedbackVaryings, &registers, &linkedVaryings, &mOutputVariables))
     {
         return false;
     }
 
+    mUsesPointSize = vertexShaderD3D->usesPointSize();
+
     bool success = true;
 
-    if (!linkAttributes(infoLog, attributeBindings, fragmentShader, vertexShader))
+    if (!linkAttributes(infoLog, attributeBindings, vertexShader))
     {
         success = false;
     }
 
-    if (!linkUniforms(infoLog, vertexShader->getUniforms(), fragmentShader->getUniforms()))
+    if (!linkUniforms(infoLog, *vertexShader, *fragmentShader, caps))
     {
         success = false;
     }
 
     // special case for gl_DepthRange, the only built-in uniform (also a struct)
-    if (vertexShader->mUsesDepthRange || fragmentShader->mUsesDepthRange)
+    if (vertexShaderD3D->usesDepthRange() || fragmentShaderD3D->usesDepthRange())
+    {
+        const sh::BlockMemberInfo &defaultInfo = sh::BlockMemberInfo::getDefaultBlockInfo();
+
+        mUniforms.push_back(new LinkedUniform(GL_FLOAT, GL_HIGH_FLOAT, "gl_DepthRange.near", 0, -1, defaultInfo));
+        mUniforms.push_back(new LinkedUniform(GL_FLOAT, GL_HIGH_FLOAT, "gl_DepthRange.far", 0, -1, defaultInfo));
+        mUniforms.push_back(new LinkedUniform(GL_FLOAT, GL_HIGH_FLOAT, "gl_DepthRange.diff", 0, -1, defaultInfo));
+    }
+
+    if (!linkUniformBlocks(infoLog, *vertexShader, *fragmentShader, caps))
     {
-        mUniforms.push_back(new Uniform(GL_FLOAT, GL_HIGH_FLOAT, "gl_DepthRange.near", 0));
-        mUniforms.push_back(new Uniform(GL_FLOAT, GL_HIGH_FLOAT, "gl_DepthRange.far", 0));
-        mUniforms.push_back(new Uniform(GL_FLOAT, GL_HIGH_FLOAT, "gl_DepthRange.diff", 0));
+        success = false;
+    }
+
+    if (!gatherTransformFeedbackLinkedVaryings(infoLog, linkedVaryings, transformFeedbackVaryings,
+                                               transformFeedbackBufferMode, &mTransformFeedbackLinkedVaryings, caps))
+    {
+        success = false;
     }
 
     if (success)
     {
-        mVertexExecutable = mRenderer->compileToExecutable(infoLog, vertexHLSL.c_str(), rx::SHADER_VERTEX, DiscardWorkaround(vertexShader->mUsesDiscardRewriting));
-        mPixelExecutable = mRenderer->compileToExecutable(infoLog, pixelHLSL.c_str(), rx::SHADER_PIXEL, DiscardWorkaround(fragmentShader->mUsesDiscardRewriting));
+        VertexFormat defaultInputLayout[MAX_VERTEX_ATTRIBS];
+        GetDefaultInputLayoutFromShader(vertexShader->getActiveAttributes(), defaultInputLayout);
+        rx::ShaderExecutable *defaultVertexExecutable = getVertexExecutableForInputLayout(defaultInputLayout);
+
+        std::vector<GLenum> defaultPixelOutput = GetDefaultOutputLayoutFromShader(mProgram->getPixelShaderKey());
+        rx::ShaderExecutable *defaultPixelExecutable = getPixelExecutableForOutputLayout(defaultPixelOutput);
 
         if (usesGeometryShader())
         {
-            std::string geometryHLSL = generateGeometryShaderHLSL(registers, packing, fragmentShader, vertexShader);
-            mGeometryExecutable = mRenderer->compileToExecutable(infoLog, geometryHLSL.c_str(), rx::SHADER_GEOMETRY, rx::ANGLE_D3D_WORKAROUND_NONE);
+            std::string geometryHLSL = mProgram->getDynamicHLSL()->generateGeometryShaderHLSL(registers, fragmentShaderD3D, vertexShaderD3D);
+            mGeometryExecutable = mProgram->getRenderer()->compileToExecutable(infoLog, geometryHLSL.c_str(),
+                                                                               rx::SHADER_GEOMETRY, mTransformFeedbackLinkedVaryings,
+                                                                               (mTransformFeedbackBufferMode == GL_SEPARATE_ATTRIBS),
+                                                                               rx::ANGLE_D3D_WORKAROUND_NONE);
         }
 
-        if (!mVertexExecutable || !mPixelExecutable || (usesGeometryShader() && !mGeometryExecutable))
+        if (!defaultVertexExecutable || !defaultPixelExecutable || (usesGeometryShader() && !mGeometryExecutable))
         {
             infoLog.append("Failed to create D3D shaders.");
             success = false;
-
-            delete mVertexExecutable;
-            mVertexExecutable = NULL;
-            delete mPixelExecutable;
-            mPixelExecutable = NULL;
-            delete mGeometryExecutable;
-            mGeometryExecutable = NULL;
+            reset();
         }
     }
 
@@ -2015,65 +1672,86 @@ bool ProgramBinary::link(InfoLog &infoLog, const AttributeBindings &attributeBin
 }
 
 // Determines the mapping between GL attributes and Direct3D 9 vertex stream usage indices
-bool ProgramBinary::linkAttributes(InfoLog &infoLog, const AttributeBindings &attributeBindings, FragmentShader *fragmentShader, VertexShader *vertexShader)
+bool ProgramBinary::linkAttributes(InfoLog &infoLog, const AttributeBindings &attributeBindings, const Shader *vertexShader)
 {
+    const rx::ShaderD3D *vertexShaderD3D = rx::ShaderD3D::makeShaderD3D(vertexShader->getImplementation());
+
     unsigned int usedLocations = 0;
+    const std::vector<sh::Attribute> &shaderAttributes = vertexShader->getActiveAttributes();
 
     // Link attributes that have a binding location
-    for (AttributeArray::iterator attribute = vertexShader->mAttributes.begin(); attribute != vertexShader->mAttributes.end(); attribute++)
+    for (unsigned int attributeIndex = 0; attributeIndex < shaderAttributes.size(); attributeIndex++)
     {
-        int location = attributeBindings.getAttributeBinding(attribute->name);
+        const sh::Attribute &attribute = shaderAttributes[attributeIndex];
 
-        if (location != -1)   // Set by glBindAttribLocation
-        {
-            if (!mLinkedAttribute[location].name.empty())
-            {
-                // Multiple active attributes bound to the same location; not an error
-            }
+        ASSERT(attribute.staticUse);
+
+        const int location = attribute.location == -1 ? attributeBindings.getAttributeBinding(attribute.name) : attribute.location;
 
-            mLinkedAttribute[location] = *attribute;
+        mShaderAttributes[attributeIndex] = attribute;
 
-            int rows = VariableRowCount(attribute->type);
+        if (location != -1)   // Set by glBindAttribLocation or by location layout qualifier
+        {
+            const int rows = VariableRegisterCount(attribute.type);
 
             if (rows + location > MAX_VERTEX_ATTRIBS)
             {
-                infoLog.append("Active attribute (%s) at location %d is too big to fit", attribute->name.c_str(), location);
+                infoLog.append("Active attribute (%s) at location %d is too big to fit", attribute.name.c_str(), location);
 
                 return false;
             }
 
-            for (int i = 0; i < rows; i++)
+            for (int row = 0; row < rows; row++)
             {
-                usedLocations |= 1 << (location + i);
+                const int rowLocation = location + row;
+                sh::ShaderVariable &linkedAttribute = mLinkedAttribute[rowLocation];
+
+                // In GLSL 3.00, attribute aliasing produces a link error
+                // In GLSL 1.00, attribute aliasing is allowed
+                if (mShaderVersion >= 300)
+                {
+                    if (!linkedAttribute.name.empty())
+                    {
+                        infoLog.append("Attribute '%s' aliases attribute '%s' at location %d", attribute.name.c_str(), linkedAttribute.name.c_str(), rowLocation);
+                        return false;
+                    }
+                }
+
+                linkedAttribute = attribute;
+                usedLocations |= 1 << rowLocation;
             }
         }
     }
 
     // Link attributes that don't have a binding location
-    for (AttributeArray::iterator attribute = vertexShader->mAttributes.begin(); attribute != vertexShader->mAttributes.end(); attribute++)
+    for (unsigned int attributeIndex = 0; attributeIndex < shaderAttributes.size(); attributeIndex++)
     {
-        int location = attributeBindings.getAttributeBinding(attribute->name);
+        const sh::Attribute &attribute = shaderAttributes[attributeIndex];
 
-        if (location == -1)   // Not set by glBindAttribLocation
+        ASSERT(attribute.staticUse);
+
+        const int location = attribute.location == -1 ? attributeBindings.getAttributeBinding(attribute.name) : attribute.location;
+
+        if (location == -1)   // Not set by glBindAttribLocation or by location layout qualifier
         {
-            int rows = VariableRowCount(attribute->type);
+            int rows = VariableRegisterCount(attribute.type);
             int availableIndex = AllocateFirstFreeBits(&usedLocations, rows, MAX_VERTEX_ATTRIBS);
 
             if (availableIndex == -1 || availableIndex + rows > MAX_VERTEX_ATTRIBS)
             {
-                infoLog.append("Too many active attributes (%s)", attribute->name.c_str());
+                infoLog.append("Too many active attributes (%s)", attribute.name.c_str());
 
                 return false;   // Fail to link
             }
 
-            mLinkedAttribute[availableIndex] = *attribute;
+            mLinkedAttribute[availableIndex] = attribute;
         }
     }
 
     for (int attributeIndex = 0; attributeIndex < MAX_VERTEX_ATTRIBS; )
     {
-        int index = vertexShader->getSemanticIndex(mLinkedAttribute[attributeIndex].name);
-        int rows = std::max(VariableRowCount(mLinkedAttribute[attributeIndex].type), 1);
+        int index = vertexShaderD3D->getSemanticIndex(mLinkedAttribute[attributeIndex].name);
+        int rows = VariableRegisterCount(mLinkedAttribute[attributeIndex].type);
 
         for (int r = 0; r < rows; r++)
         {
@@ -2086,19 +1764,48 @@ bool ProgramBinary::linkAttributes(InfoLog &infoLog, const AttributeBindings &at
     return true;
 }
 
-bool ProgramBinary::linkUniforms(InfoLog &infoLog, const sh::ActiveUniforms &vertexUniforms, const sh::ActiveUniforms &fragmentUniforms)
+bool ProgramBinary::linkValidateVariablesBase(InfoLog &infoLog, const std::string &variableName, const sh::ShaderVariable &vertexVariable,
+                                              const sh::ShaderVariable &fragmentVariable, bool validatePrecision)
 {
-    for (sh::ActiveUniforms::const_iterator uniform = vertexUniforms.begin(); uniform != vertexUniforms.end(); uniform++)
+    if (vertexVariable.type != fragmentVariable.type)
+    {
+        infoLog.append("Types for %s differ between vertex and fragment shaders", variableName.c_str());
+        return false;
+    }
+    if (vertexVariable.arraySize != fragmentVariable.arraySize)
     {
-        if (!defineUniform(GL_VERTEX_SHADER, *uniform, infoLog))
+        infoLog.append("Array sizes for %s differ between vertex and fragment shaders", variableName.c_str());
+        return false;
+    }
+    if (validatePrecision && vertexVariable.precision != fragmentVariable.precision)
+    {
+        infoLog.append("Precisions for %s differ between vertex and fragment shaders", variableName.c_str());
+        return false;
+    }
+
+    if (vertexVariable.fields.size() != fragmentVariable.fields.size())
+    {
+        infoLog.append("Structure lengths for %s differ between vertex and fragment shaders", variableName.c_str());
+        return false;
+    }
+    const unsigned int numMembers = vertexVariable.fields.size();
+    for (unsigned int memberIndex = 0; memberIndex < numMembers; memberIndex++)
+    {
+        const sh::ShaderVariable &vertexMember = vertexVariable.fields[memberIndex];
+        const sh::ShaderVariable &fragmentMember = fragmentVariable.fields[memberIndex];
+
+        if (vertexMember.name != fragmentMember.name)
         {
+            infoLog.append("Name mismatch for field '%d' of %s: (in vertex: '%s', in fragment: '%s')",
+                           memberIndex, variableName.c_str(),
+                           vertexMember.name.c_str(), fragmentMember.name.c_str());
             return false;
         }
-    }
 
-    for (sh::ActiveUniforms::const_iterator uniform = fragmentUniforms.begin(); uniform != fragmentUniforms.end(); uniform++)
-    {
-        if (!defineUniform(GL_FRAGMENT_SHADER, *uniform, infoLog))
+        const std::string memberName = variableName.substr(0, variableName.length() - 1) + "." +
+                                       vertexMember.name + "'";
+
+        if (!linkValidateVariablesBase(infoLog, vertexMember.name, vertexMember, fragmentMember, validatePrecision))
         {
             return false;
         }
@@ -2107,274 +1814,582 @@ bool ProgramBinary::linkUniforms(InfoLog &infoLog, const sh::ActiveUniforms &ver
     return true;
 }
 
-bool ProgramBinary::defineUniform(GLenum shader, const sh::Uniform &constant, InfoLog &infoLog)
+bool ProgramBinary::linkValidateUniforms(InfoLog &infoLog, const std::string &uniformName, const sh::Uniform &vertexUniform, const sh::Uniform &fragmentUniform)
 {
-    if (constant.type == GL_SAMPLER_2D ||
-        constant.type == GL_SAMPLER_CUBE)
+    if (!linkValidateVariablesBase(infoLog, uniformName, vertexUniform, fragmentUniform, true))
     {
-        unsigned int samplerIndex = constant.registerIndex;
-            
-        do
-        {
-            if (shader == GL_VERTEX_SHADER)
-            {
-                if (samplerIndex < mRenderer->getMaxVertexTextureImageUnits())
-                {
-                    mSamplersVS[samplerIndex].active = true;
-                    mSamplersVS[samplerIndex].textureType = (constant.type == GL_SAMPLER_CUBE) ? TEXTURE_CUBE : TEXTURE_2D;
-                    mSamplersVS[samplerIndex].logicalTextureUnit = 0;
-                    mUsedVertexSamplerRange = std::max(samplerIndex + 1, mUsedVertexSamplerRange);
-                }
-                else
-                {
-                    infoLog.append("Vertex shader sampler count exceeds the maximum vertex texture units (%d).", mRenderer->getMaxVertexTextureImageUnits());
-                    return false;
-                }
-            }
-            else if (shader == GL_FRAGMENT_SHADER)
-            {
-                if (samplerIndex < MAX_TEXTURE_IMAGE_UNITS)
-                {
-                    mSamplersPS[samplerIndex].active = true;
-                    mSamplersPS[samplerIndex].textureType = (constant.type == GL_SAMPLER_CUBE) ? TEXTURE_CUBE : TEXTURE_2D;
-                    mSamplersPS[samplerIndex].logicalTextureUnit = 0;
-                    mUsedPixelSamplerRange = std::max(samplerIndex + 1, mUsedPixelSamplerRange);
-                }
-                else
-                {
-                    infoLog.append("Pixel shader sampler count exceeds MAX_TEXTURE_IMAGE_UNITS (%d).", MAX_TEXTURE_IMAGE_UNITS);
-                    return false;
-                }
-            }
-            else UNREACHABLE();
+        return false;
+    }
 
-            samplerIndex++;
-        }
-        while (samplerIndex < constant.registerIndex + constant.arraySize);
+    return true;
+}
+
+bool ProgramBinary::linkValidateVaryings(InfoLog &infoLog, const std::string &varyingName, const sh::Varying &vertexVarying, const sh::Varying &fragmentVarying)
+{
+    if (!linkValidateVariablesBase(infoLog, varyingName, vertexVarying, fragmentVarying, false))
+    {
+        return false;
+    }
+
+    if (vertexVarying.interpolation != fragmentVarying.interpolation)
+    {
+        infoLog.append("Interpolation types for %s differ between vertex and fragment shaders", varyingName.c_str());
+        return false;
+    }
+
+    return true;
+}
+
+bool ProgramBinary::linkValidateInterfaceBlockFields(InfoLog &infoLog, const std::string &uniformName, const sh::InterfaceBlockField &vertexUniform, const sh::InterfaceBlockField &fragmentUniform)
+{
+    if (!linkValidateVariablesBase(infoLog, uniformName, vertexUniform, fragmentUniform, true))
+    {
+        return false;
+    }
+
+    if (vertexUniform.isRowMajorLayout != fragmentUniform.isRowMajorLayout)
+    {
+        infoLog.append("Matrix packings for %s differ between vertex and fragment shaders", uniformName.c_str());
+        return false;
     }
 
-    Uniform *uniform = NULL;
-    GLint location = getUniformLocation(constant.name);
+    return true;
+}
+
+bool ProgramBinary::linkUniforms(InfoLog &infoLog, const Shader &vertexShader, const Shader &fragmentShader, const Caps &caps)
+{
+    const rx::ShaderD3D *vertexShaderD3D = rx::ShaderD3D::makeShaderD3D(vertexShader.getImplementation());
+    const rx::ShaderD3D *fragmentShaderD3D = rx::ShaderD3D::makeShaderD3D(fragmentShader.getImplementation());
+
+    const std::vector<sh::Uniform> &vertexUniforms = vertexShader.getUniforms();
+    const std::vector<sh::Uniform> &fragmentUniforms = fragmentShader.getUniforms();
+
+    // Check that uniforms defined in the vertex and fragment shaders are identical
+    typedef std::map<std::string, const sh::Uniform*> UniformMap;
+    UniformMap linkedUniforms;
 
-    if (location >= 0)   // Previously defined, type and precision must match
+    for (unsigned int vertexUniformIndex = 0; vertexUniformIndex < vertexUniforms.size(); vertexUniformIndex++)
     {
-        uniform = mUniforms[mUniformIndex[location].index];
+        const sh::Uniform &vertexUniform = vertexUniforms[vertexUniformIndex];
+        linkedUniforms[vertexUniform.name] = &vertexUniform;
+    }
 
-        if (uniform->type != constant.type)
+    for (unsigned int fragmentUniformIndex = 0; fragmentUniformIndex < fragmentUniforms.size(); fragmentUniformIndex++)
+    {
+        const sh::Uniform &fragmentUniform = fragmentUniforms[fragmentUniformIndex];
+        UniformMap::const_iterator entry = linkedUniforms.find(fragmentUniform.name);
+        if (entry != linkedUniforms.end())
         {
-            infoLog.append("Types for uniform %s do not match between the vertex and fragment shader", uniform->name.c_str());
-            return false;
+            const sh::Uniform &vertexUniform = *entry->second;
+            const std::string &uniformName = "uniform '" + vertexUniform.name + "'";
+            if (!linkValidateUniforms(infoLog, uniformName, vertexUniform, fragmentUniform))
+            {
+                return false;
+            }
         }
+    }
 
-        if (uniform->precision != constant.precision)
+    for (unsigned int uniformIndex = 0; uniformIndex < vertexUniforms.size(); uniformIndex++)
+    {
+        const sh::Uniform &uniform = vertexUniforms[uniformIndex];
+
+        if (uniform.staticUse)
         {
-            infoLog.append("Precisions for uniform %s do not match between the vertex and fragment shader", uniform->name.c_str());
-            return false;
+            defineUniformBase(GL_VERTEX_SHADER, uniform, vertexShaderD3D->getUniformRegister(uniform.name));
         }
     }
-    else
+
+    for (unsigned int uniformIndex = 0; uniformIndex < fragmentUniforms.size(); uniformIndex++)
     {
-        uniform = new Uniform(constant.type, constant.precision, constant.name, constant.arraySize);
+        const sh::Uniform &uniform = fragmentUniforms[uniformIndex];
+
+        if (uniform.staticUse)
+        {
+            defineUniformBase(GL_FRAGMENT_SHADER, uniform, fragmentShaderD3D->getUniformRegister(uniform.name));
+        }
     }
 
-    if (!uniform)
+    if (!indexUniforms(infoLog, caps))
     {
         return false;
     }
 
-    if (shader == GL_FRAGMENT_SHADER)
+    mProgram->initializeUniformStorage(mUniforms);
+
+    return true;
+}
+
+void ProgramBinary::defineUniformBase(GLenum shader, const sh::Uniform &uniform, unsigned int uniformRegister)
+{
+    ShShaderOutput outputType = rx::ShaderD3D::getCompilerOutputType(shader);
+    sh::HLSLBlockEncoder encoder(sh::HLSLBlockEncoder::GetStrategyFor(outputType));
+    encoder.skipRegisters(uniformRegister);
+
+    defineUniform(shader, uniform, uniform.name, &encoder);
+}
+
+void ProgramBinary::defineUniform(GLenum shader, const sh::ShaderVariable &uniform,
+                                  const std::string &fullName, sh::HLSLBlockEncoder *encoder)
+{
+    if (uniform.isStruct())
     {
-        uniform->psRegisterIndex = constant.registerIndex;
+        for (unsigned int elementIndex = 0; elementIndex < uniform.elementCount(); elementIndex++)
+        {
+            const std::string &elementString = (uniform.isArray() ? ArrayString(elementIndex) : "");
+
+            encoder->enterAggregateType();
+
+            for (size_t fieldIndex = 0; fieldIndex < uniform.fields.size(); fieldIndex++)
+            {
+                const sh::ShaderVariable &field = uniform.fields[fieldIndex];
+                const std::string &fieldFullName = (fullName + elementString + "." + field.name);
+
+                defineUniform(shader, field, fieldFullName, encoder);
+            }
+
+            encoder->exitAggregateType();
+        }
     }
-    else if (shader == GL_VERTEX_SHADER)
+    else // Not a struct
     {
-        uniform->vsRegisterIndex = constant.registerIndex;
-    }
-    else UNREACHABLE();
+        // Arrays are treated as aggregate types
+        if (uniform.isArray())
+        {
+            encoder->enterAggregateType();
+        }
 
-    if (location >= 0)
-    {
-        return uniform->type == constant.type;
-    }
+        LinkedUniform *linkedUniform = getUniformByName(fullName);
 
-    mUniforms.push_back(uniform);
-    unsigned int uniformIndex = mUniforms.size() - 1;
+        if (!linkedUniform)
+        {
+            linkedUniform = new LinkedUniform(uniform.type, uniform.precision, fullName, uniform.arraySize,
+                                              -1, sh::BlockMemberInfo::getDefaultBlockInfo());
+            ASSERT(linkedUniform);
+            linkedUniform->registerElement = encoder->getCurrentElement();
+            mUniforms.push_back(linkedUniform);
+        }
 
-    for (unsigned int i = 0; i < uniform->elementCount(); i++)
-    {
-        mUniformIndex.push_back(UniformLocation(constant.name, i, uniformIndex));
+        ASSERT(linkedUniform->registerElement == encoder->getCurrentElement());
+
+        if (shader == GL_FRAGMENT_SHADER)
+        {
+            linkedUniform->psRegisterIndex = encoder->getCurrentRegister();
+        }
+        else if (shader == GL_VERTEX_SHADER)
+        {
+            linkedUniform->vsRegisterIndex = encoder->getCurrentRegister();
+        }
+        else UNREACHABLE();
+
+        // Advance the uniform offset, to track registers allocation for structs
+        encoder->encodeType(uniform.type, uniform.arraySize, false);
+
+        // Arrays are treated as aggregate types
+        if (uniform.isArray())
+        {
+            encoder->exitAggregateType();
+        }
     }
+}
 
-    if (shader == GL_VERTEX_SHADER)
+bool ProgramBinary::indexSamplerUniform(const LinkedUniform &uniform, InfoLog &infoLog, const Caps &caps)
+{
+    ASSERT(IsSampler(uniform.type));
+    ASSERT(uniform.vsRegisterIndex != GL_INVALID_INDEX || uniform.psRegisterIndex != GL_INVALID_INDEX);
+
+    if (uniform.vsRegisterIndex != GL_INVALID_INDEX)
     {
-        if (constant.registerIndex + uniform->registerCount > mRenderer->getReservedVertexUniformVectors() + mRenderer->getMaxVertexUniformVectors())
+        if (!assignSamplers(uniform.vsRegisterIndex, uniform.type, uniform.arraySize, mSamplersVS,
+                            &mUsedVertexSamplerRange))
         {
-            infoLog.append("Vertex shader active uniforms exceed GL_MAX_VERTEX_UNIFORM_VECTORS (%u)", mRenderer->getMaxVertexUniformVectors());
+            infoLog.append("Vertex shader sampler count exceeds the maximum vertex texture units (%d).",
+                           mSamplersVS.size());
+            return false;
+        }
+
+        unsigned int maxVertexVectors = mProgram->getRenderer()->getReservedVertexUniformVectors() + caps.maxVertexUniformVectors;
+        if (uniform.vsRegisterIndex + uniform.registerCount > maxVertexVectors)
+        {
+            infoLog.append("Vertex shader active uniforms exceed GL_MAX_VERTEX_UNIFORM_VECTORS (%u)",
+                           caps.maxVertexUniformVectors);
             return false;
         }
     }
-    else if (shader == GL_FRAGMENT_SHADER)
+
+    if (uniform.psRegisterIndex != GL_INVALID_INDEX)
     {
-        if (constant.registerIndex + uniform->registerCount > mRenderer->getReservedFragmentUniformVectors() + mRenderer->getMaxFragmentUniformVectors())
+        if (!assignSamplers(uniform.psRegisterIndex, uniform.type, uniform.arraySize, mSamplersPS,
+                            &mUsedPixelSamplerRange))
+        {
+            infoLog.append("Pixel shader sampler count exceeds MAX_TEXTURE_IMAGE_UNITS (%d).",
+                           mSamplersPS.size());
+            return false;
+        }
+
+        unsigned int maxFragmentVectors = mProgram->getRenderer()->getReservedFragmentUniformVectors() + caps.maxFragmentUniformVectors;
+        if (uniform.psRegisterIndex + uniform.registerCount > maxFragmentVectors)
         {
-            infoLog.append("Fragment shader active uniforms exceed GL_MAX_FRAGMENT_UNIFORM_VECTORS (%u)", mRenderer->getMaxFragmentUniformVectors());
+            infoLog.append("Fragment shader active uniforms exceed GL_MAX_FRAGMENT_UNIFORM_VECTORS (%u)",
+                           caps.maxFragmentUniformVectors);
             return false;
         }
     }
-    else UNREACHABLE();
 
     return true;
 }
 
-std::string ProgramBinary::generateGeometryShaderHLSL(int registers, const Varying *packing[][4], FragmentShader *fragmentShader, VertexShader *vertexShader) const
+bool ProgramBinary::indexUniforms(InfoLog &infoLog, const Caps &caps)
 {
-    // for now we only handle point sprite emulation
-    ASSERT(usesPointSpriteEmulation());
-    return generatePointSpriteHLSL(registers, packing, fragmentShader, vertexShader);
+    for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); uniformIndex++)
+    {
+        const LinkedUniform &uniform = *mUniforms[uniformIndex];
+
+        if (IsSampler(uniform.type))
+        {
+            if (!indexSamplerUniform(uniform, infoLog, caps))
+            {
+                return false;
+            }
+        }
+
+        for (unsigned int arrayElementIndex = 0; arrayElementIndex < uniform.elementCount(); arrayElementIndex++)
+        {
+            mUniformIndex.push_back(VariableLocation(uniform.name, arrayElementIndex, uniformIndex));
+        }
+    }
+
+    return true;
 }
 
-std::string ProgramBinary::generatePointSpriteHLSL(int registers, const Varying *packing[][4], FragmentShader *fragmentShader, VertexShader *vertexShader) const
+bool ProgramBinary::assignSamplers(unsigned int startSamplerIndex,
+                                   GLenum samplerType,
+                                   unsigned int samplerCount,
+                                   std::vector<Sampler> &outSamplers,
+                                   GLuint *outUsedRange)
 {
-    ASSERT(registers >= 0);
-    ASSERT(vertexShader->mUsesPointSize);
-    ASSERT(mRenderer->getMajorShaderModel() >= 4);
+    unsigned int samplerIndex = startSamplerIndex;
 
-    std::string geomHLSL;
+    do
+    {
+        if (samplerIndex < outSamplers.size())
+        {
+            Sampler& sampler = outSamplers[samplerIndex];
+            sampler.active = true;
+            sampler.textureType = GetTextureType(samplerType);
+            sampler.logicalTextureUnit = 0;
+            *outUsedRange = std::max(samplerIndex + 1, *outUsedRange);
+        }
+        else
+        {
+            return false;
+        }
 
-    std::string varyingSemantic = "TEXCOORD";
+        samplerIndex++;
+    } while (samplerIndex < startSamplerIndex + samplerCount);
 
-    std::string fragCoordSemantic;
-    std::string pointCoordSemantic;
+    return true;
+}
 
-    int reservedRegisterIndex = registers;
+bool ProgramBinary::areMatchingInterfaceBlocks(InfoLog &infoLog, const sh::InterfaceBlock &vertexInterfaceBlock, const sh::InterfaceBlock &fragmentInterfaceBlock)
+{
+    const char* blockName = vertexInterfaceBlock.name.c_str();
 
-    if (fragmentShader->mUsesFragCoord)
+    // validate blocks for the same member types
+    if (vertexInterfaceBlock.fields.size() != fragmentInterfaceBlock.fields.size())
     {
-        fragCoordSemantic = varyingSemantic + str(reservedRegisterIndex++);
+        infoLog.append("Types for interface block '%s' differ between vertex and fragment shaders", blockName);
+        return false;
     }
 
-    if (fragmentShader->mUsesPointCoord)
+    if (vertexInterfaceBlock.arraySize != fragmentInterfaceBlock.arraySize)
     {
-        pointCoordSemantic = varyingSemantic + str(reservedRegisterIndex++);
+        infoLog.append("Array sizes differ for interface block '%s' between vertex and fragment shaders", blockName);
+        return false;
     }
 
-    geomHLSL += "uniform float4 dx_ViewCoords : register(c1);\n"
-                "\n"
-                "struct GS_INPUT\n"
-                "{\n";
+    if (vertexInterfaceBlock.layout != fragmentInterfaceBlock.layout || vertexInterfaceBlock.isRowMajorLayout != fragmentInterfaceBlock.isRowMajorLayout)
+    {
+        infoLog.append("Layout qualifiers differ for interface block '%s' between vertex and fragment shaders", blockName);
+        return false;
+    }
 
-    for (int r = 0; r < registers; r++)
+    const unsigned int numBlockMembers = vertexInterfaceBlock.fields.size();
+    for (unsigned int blockMemberIndex = 0; blockMemberIndex < numBlockMembers; blockMemberIndex++)
     {
-        int registerSize = packing[r][3] ? 4 : (packing[r][2] ? 3 : (packing[r][1] ? 2 : 1));
+        const sh::InterfaceBlockField &vertexMember = vertexInterfaceBlock.fields[blockMemberIndex];
+        const sh::InterfaceBlockField &fragmentMember = fragmentInterfaceBlock.fields[blockMemberIndex];
+
+        if (vertexMember.name != fragmentMember.name)
+        {
+            infoLog.append("Name mismatch for field %d of interface block '%s': (in vertex: '%s', in fragment: '%s')",
+                           blockMemberIndex, blockName, vertexMember.name.c_str(), fragmentMember.name.c_str());
+            return false;
+        }
 
-        geomHLSL += "    float" + str(registerSize) + " v" + str(r) + " : " + varyingSemantic + str(r) + ";\n";
+        std::string memberName = "interface block '" + vertexInterfaceBlock.name + "' member '" + vertexMember.name + "'";
+        if (!linkValidateInterfaceBlockFields(infoLog, memberName, vertexMember, fragmentMember))
+        {
+            return false;
+        }
     }
 
-    if (fragmentShader->mUsesFragCoord)
+    return true;
+}
+
+bool ProgramBinary::linkUniformBlocks(InfoLog &infoLog, const Shader &vertexShader, const Shader &fragmentShader, const Caps &caps)
+{
+    const std::vector<sh::InterfaceBlock> &vertexInterfaceBlocks = vertexShader.getInterfaceBlocks();
+    const std::vector<sh::InterfaceBlock> &fragmentInterfaceBlocks = fragmentShader.getInterfaceBlocks();
+
+    // Check that interface blocks defined in the vertex and fragment shaders are identical
+    typedef std::map<std::string, const sh::InterfaceBlock*> UniformBlockMap;
+    UniformBlockMap linkedUniformBlocks;
+
+    for (unsigned int blockIndex = 0; blockIndex < vertexInterfaceBlocks.size(); blockIndex++)
     {
-        geomHLSL += "    float4 gl_FragCoord : " + fragCoordSemantic + ";\n";
+        const sh::InterfaceBlock &vertexInterfaceBlock = vertexInterfaceBlocks[blockIndex];
+        linkedUniformBlocks[vertexInterfaceBlock.name] = &vertexInterfaceBlock;
     }
 
-    geomHLSL += "    float gl_PointSize : PSIZE;\n"
-                "    float4 gl_Position : SV_Position;\n"
-                "};\n"
-                "\n"
-                "struct GS_OUTPUT\n"
-                "{\n";
+    for (unsigned int blockIndex = 0; blockIndex < fragmentInterfaceBlocks.size(); blockIndex++)
+    {
+        const sh::InterfaceBlock &fragmentInterfaceBlock = fragmentInterfaceBlocks[blockIndex];
+        UniformBlockMap::const_iterator entry = linkedUniformBlocks.find(fragmentInterfaceBlock.name);
+        if (entry != linkedUniformBlocks.end())
+        {
+            const sh::InterfaceBlock &vertexInterfaceBlock = *entry->second;
+            if (!areMatchingInterfaceBlocks(infoLog, vertexInterfaceBlock, fragmentInterfaceBlock))
+            {
+                return false;
+            }
+        }
+    }
 
-    for (int r = 0; r < registers; r++)
+    for (unsigned int blockIndex = 0; blockIndex < vertexInterfaceBlocks.size(); blockIndex++)
     {
-        int registerSize = packing[r][3] ? 4 : (packing[r][2] ? 3 : (packing[r][1] ? 2 : 1));
+        const sh::InterfaceBlock &interfaceBlock = vertexInterfaceBlocks[blockIndex];
 
-        geomHLSL += "    float" + str(registerSize) + " v" + str(r) + " : " + varyingSemantic + str(r) + ";\n";
+        // Note: shared and std140 layouts are always considered active
+        if (interfaceBlock.staticUse || interfaceBlock.layout != sh::BLOCKLAYOUT_PACKED)
+        {
+            if (!defineUniformBlock(infoLog, vertexShader, interfaceBlock, caps))
+            {
+                return false;
+            }
+        }
     }
 
-    if (fragmentShader->mUsesFragCoord)
+    for (unsigned int blockIndex = 0; blockIndex < fragmentInterfaceBlocks.size(); blockIndex++)
     {
-        geomHLSL += "    float4 gl_FragCoord : " + fragCoordSemantic + ";\n";
+        const sh::InterfaceBlock &interfaceBlock = fragmentInterfaceBlocks[blockIndex];
+
+        // Note: shared and std140 layouts are always considered active
+        if (interfaceBlock.staticUse || interfaceBlock.layout != sh::BLOCKLAYOUT_PACKED)
+        {
+            if (!defineUniformBlock(infoLog, fragmentShader, interfaceBlock, caps))
+            {
+                return false;
+            }
+        }
     }
 
-    if (fragmentShader->mUsesPointCoord)
+    return true;
+}
+
+bool ProgramBinary::gatherTransformFeedbackLinkedVaryings(InfoLog &infoLog, const std::vector<LinkedVarying> &linkedVaryings,
+                                                          const std::vector<std::string> &transformFeedbackVaryingNames,
+                                                          GLenum transformFeedbackBufferMode,
+                                                          std::vector<LinkedVarying> *outTransformFeedbackLinkedVaryings,
+                                                          const Caps &caps) const
+{
+    size_t totalComponents = 0;
+
+    // Gather the linked varyings that are used for transform feedback, they should all exist.
+    outTransformFeedbackLinkedVaryings->clear();
+    for (size_t i = 0; i < transformFeedbackVaryingNames.size(); i++)
     {
-        geomHLSL += "    float2 gl_PointCoord : " + pointCoordSemantic + ";\n";
-    }
+        bool found = false;
+        for (size_t j = 0; j < linkedVaryings.size(); j++)
+        {
+            if (transformFeedbackVaryingNames[i] == linkedVaryings[j].name)
+            {
+                for (size_t k = 0; k < outTransformFeedbackLinkedVaryings->size(); k++)
+                {
+                    if (outTransformFeedbackLinkedVaryings->at(k).name == linkedVaryings[j].name)
+                    {
+                        infoLog.append("Two transform feedback varyings specify the same output variable (%s).", linkedVaryings[j].name.c_str());
+                        return false;
+                    }
+                }
+
+                size_t componentCount = linkedVaryings[j].semanticIndexCount * 4;
+                if (transformFeedbackBufferMode == GL_SEPARATE_ATTRIBS &&
+                    componentCount > caps.maxTransformFeedbackSeparateComponents)
+                {
+                    infoLog.append("Transform feedback varying's %s components (%u) exceed the maximum separate components (%u).",
+                                   linkedVaryings[j].name.c_str(), componentCount, caps.maxTransformFeedbackSeparateComponents);
+                    return false;
+                }
 
-    geomHLSL +=   "    float gl_PointSize : PSIZE;\n"
-                  "    float4 gl_Position : SV_Position;\n"
-                  "};\n"
-                  "\n"
-                  "static float2 pointSpriteCorners[] = \n"
-                  "{\n"
-                  "    float2( 0.5f, -0.5f),\n"
-                  "    float2( 0.5f,  0.5f),\n"
-                  "    float2(-0.5f, -0.5f),\n"
-                  "    float2(-0.5f,  0.5f)\n"
-                  "};\n"
-                  "\n"
-                  "static float2 pointSpriteTexcoords[] = \n"
-                  "{\n"
-                  "    float2(1.0f, 1.0f),\n"
-                  "    float2(1.0f, 0.0f),\n"
-                  "    float2(0.0f, 1.0f),\n"
-                  "    float2(0.0f, 0.0f)\n"
-                  "};\n"
-                  "\n"
-                  "static float minPointSize = " + str(ALIASED_POINT_SIZE_RANGE_MIN) + ".0f;\n"
-                  "static float maxPointSize = " + str(mRenderer->getMaxPointSize()) + ".0f;\n"
-                  "\n"
-                  "[maxvertexcount(4)]\n"
-                  "void main(point GS_INPUT input[1], inout TriangleStream<GS_OUTPUT> outStream)\n"
-                  "{\n"
-                  "    GS_OUTPUT output = (GS_OUTPUT)0;\n"
-                  "    output.gl_PointSize = input[0].gl_PointSize;\n";
+                totalComponents += componentCount;
+
+                outTransformFeedbackLinkedVaryings->push_back(linkedVaryings[j]);
+                found = true;
+                break;
+            }
+        }
 
-    for (int r = 0; r < registers; r++)
+        // All transform feedback varyings are expected to exist since packVaryings checks for them.
+        ASSERT(found);
+    }
+
+    if (transformFeedbackBufferMode == GL_INTERLEAVED_ATTRIBS && totalComponents > caps.maxTransformFeedbackInterleavedComponents)
     {
-        geomHLSL += "    output.v" + str(r) + " = input[0].v" + str(r) + ";\n";
+        infoLog.append("Transform feedback varying total components (%u) exceed the maximum interleaved components (%u).",
+                       totalComponents, caps.maxTransformFeedbackInterleavedComponents);
+        return false;
     }
 
-    if (fragmentShader->mUsesFragCoord)
+    return true;
+}
+
+template <typename VarT>
+void ProgramBinary::defineUniformBlockMembers(const std::vector<VarT> &fields, const std::string &prefix, int blockIndex,
+                                              sh::BlockLayoutEncoder *encoder, std::vector<unsigned int> *blockUniformIndexes,
+                                              bool inRowMajorLayout)
+{
+    for (unsigned int uniformIndex = 0; uniformIndex < fields.size(); uniformIndex++)
     {
-        geomHLSL += "    output.gl_FragCoord = input[0].gl_FragCoord;\n";
+        const VarT &field = fields[uniformIndex];
+        const std::string &fieldName = (prefix.empty() ? field.name : prefix + "." + field.name);
+
+        if (field.isStruct())
+        {
+            bool rowMajorLayout = (inRowMajorLayout || IsRowMajorLayout(field));
+
+            for (unsigned int arrayElement = 0; arrayElement < field.elementCount(); arrayElement++)
+            {
+                encoder->enterAggregateType();
+
+                const std::string uniformElementName = fieldName + (field.isArray() ? ArrayString(arrayElement) : "");
+                defineUniformBlockMembers(field.fields, uniformElementName, blockIndex, encoder, blockUniformIndexes, rowMajorLayout);
+
+                encoder->exitAggregateType();
+            }
+        }
+        else
+        {
+            bool isRowMajorMatrix = (IsMatrixType(field.type) && inRowMajorLayout);
+
+            sh::BlockMemberInfo memberInfo = encoder->encodeType(field.type, field.arraySize, isRowMajorMatrix);
+
+            LinkedUniform *newUniform = new LinkedUniform(field.type, field.precision, fieldName, field.arraySize,
+                                                          blockIndex, memberInfo);
+
+            // add to uniform list, but not index, since uniform block uniforms have no location
+            blockUniformIndexes->push_back(mUniforms.size());
+            mUniforms.push_back(newUniform);
+        }
     }
+}
 
-    geomHLSL += "    \n"
-                "    float gl_PointSize = clamp(input[0].gl_PointSize, minPointSize, maxPointSize);\n"
-                "    float4 gl_Position = input[0].gl_Position;\n"
-                "    float2 viewportScale = float2(1.0f / dx_ViewCoords.x, 1.0f / dx_ViewCoords.y) * gl_Position.w;\n";
+bool ProgramBinary::defineUniformBlock(InfoLog &infoLog, const Shader &shader, const sh::InterfaceBlock &interfaceBlock, const Caps &caps)
+{
+    const rx::ShaderD3D* shaderD3D = rx::ShaderD3D::makeShaderD3D(shader.getImplementation());
 
-    for (int corner = 0; corner < 4; corner++)
+    // create uniform block entries if they do not exist
+    if (getUniformBlockIndex(interfaceBlock.name) == GL_INVALID_INDEX)
     {
-        geomHLSL += "    \n"
-                    "    output.gl_Position = gl_Position + float4(pointSpriteCorners[" + str(corner) + "] * viewportScale * gl_PointSize, 0.0f, 0.0f);\n";
+        std::vector<unsigned int> blockUniformIndexes;
+        const unsigned int blockIndex = mUniformBlocks.size();
+
+        // define member uniforms
+        sh::BlockLayoutEncoder *encoder = NULL;
 
-        if (fragmentShader->mUsesPointCoord)
+        if (interfaceBlock.layout == sh::BLOCKLAYOUT_STANDARD)
         {
-            geomHLSL += "    output.gl_PointCoord = pointSpriteTexcoords[" + str(corner) + "];\n";
+            encoder = new sh::Std140BlockEncoder;
         }
+        else
+        {
+            encoder = new sh::HLSLBlockEncoder(sh::HLSLBlockEncoder::ENCODE_PACKED);
+        }
+        ASSERT(encoder);
+
+        defineUniformBlockMembers(interfaceBlock.fields, "", blockIndex, encoder, &blockUniformIndexes, interfaceBlock.isRowMajorLayout);
+
+        size_t dataSize = encoder->getBlockSize();
 
-        geomHLSL += "    outStream.Append(output);\n";
+        // create all the uniform blocks
+        if (interfaceBlock.arraySize > 0)
+        {
+            for (unsigned int uniformBlockElement = 0; uniformBlockElement < interfaceBlock.arraySize; uniformBlockElement++)
+            {
+                UniformBlock *newUniformBlock = new UniformBlock(interfaceBlock.name, uniformBlockElement, dataSize);
+                newUniformBlock->memberUniformIndexes = blockUniformIndexes;
+                mUniformBlocks.push_back(newUniformBlock);
+            }
+        }
+        else
+        {
+            UniformBlock *newUniformBlock = new UniformBlock(interfaceBlock.name, GL_INVALID_INDEX, dataSize);
+            newUniformBlock->memberUniformIndexes = blockUniformIndexes;
+            mUniformBlocks.push_back(newUniformBlock);
+        }
     }
 
-    geomHLSL += "    \n"
-                "    outStream.RestartStrip();\n"
-                "}\n";
+    if (interfaceBlock.staticUse)
+    {
+        // Assign registers to the uniform blocks
+        const GLuint blockIndex = getUniformBlockIndex(interfaceBlock.name);
+        const unsigned int elementCount = std::max(1u, interfaceBlock.arraySize);
+        ASSERT(blockIndex != GL_INVALID_INDEX);
+        ASSERT(blockIndex + elementCount <= mUniformBlocks.size());
+
+        unsigned int interfaceBlockRegister = shaderD3D->getInterfaceBlockRegister(interfaceBlock.name);
 
-    return geomHLSL;
+        for (unsigned int uniformBlockElement = 0; uniformBlockElement < elementCount; uniformBlockElement++)
+        {
+            UniformBlock *uniformBlock = mUniformBlocks[blockIndex + uniformBlockElement];
+            ASSERT(uniformBlock->name == interfaceBlock.name);
+
+            if (!assignUniformBlockRegister(infoLog, uniformBlock, shader.getType(),
+                                            interfaceBlockRegister + uniformBlockElement, caps))
+            {
+                return false;
+            }
+        }
+    }
+
+    return true;
 }
 
-// This method needs to match OutputHLSL::decorate
-std::string ProgramBinary::decorateAttribute(const std::string &name)
+bool ProgramBinary::assignUniformBlockRegister(InfoLog &infoLog, UniformBlock *uniformBlock, GLenum shader, unsigned int registerIndex, const Caps &caps)
 {
-    if (name.compare(0, 3, "gl_") != 0 && name.compare(0, 3, "dx_") != 0)
+    if (shader == GL_VERTEX_SHADER)
     {
-        return "_" + name;
+        uniformBlock->vsRegisterIndex = registerIndex;
+        if (registerIndex - mProgram->getRenderer()->getReservedVertexUniformBuffers() >= caps.maxVertexUniformBlocks)
+        {
+            infoLog.append("Vertex shader uniform block count exceed GL_MAX_VERTEX_UNIFORM_BLOCKS (%u)", caps.maxVertexUniformBlocks);
+            return false;
+        }
+    }
+    else if (shader == GL_FRAGMENT_SHADER)
+    {
+        uniformBlock->psRegisterIndex = registerIndex;
+        if (registerIndex - mProgram->getRenderer()->getReservedFragmentUniformBuffers() >= caps.maxFragmentUniformBlocks)
+        {
+            infoLog.append("Fragment shader uniform block count exceed GL_MAX_FRAGMENT_UNIFORM_BLOCKS (%u)", caps.maxFragmentUniformBlocks);
+            return false;
+        }
     }
-    
-    return name;
+    else UNREACHABLE();
+
+    return true;
 }
 
-bool ProgramBinary::isValidated() const 
+bool ProgramBinary::isValidated() const
 {
     return mValidated;
 }
@@ -2500,10 +2515,145 @@ GLint ProgramBinary::getActiveUniformMaxLength() const
     return maxLength;
 }
 
-void ProgramBinary::validate(InfoLog &infoLog)
+GLint ProgramBinary::getActiveUniformi(GLuint index, GLenum pname) const
+{
+    const gl::LinkedUniform& uniform = *mUniforms[index];
+
+    switch (pname)
+    {
+      case GL_UNIFORM_TYPE:         return static_cast<GLint>(uniform.type);
+      case GL_UNIFORM_SIZE:         return static_cast<GLint>(uniform.elementCount());
+      case GL_UNIFORM_NAME_LENGTH:  return static_cast<GLint>(uniform.name.size() + 1 + (uniform.isArray() ? 3 : 0));
+      case GL_UNIFORM_BLOCK_INDEX:  return uniform.blockIndex;
+
+      case GL_UNIFORM_OFFSET:       return uniform.blockInfo.offset;
+      case GL_UNIFORM_ARRAY_STRIDE: return uniform.blockInfo.arrayStride;
+      case GL_UNIFORM_MATRIX_STRIDE: return uniform.blockInfo.matrixStride;
+      case GL_UNIFORM_IS_ROW_MAJOR: return static_cast<GLint>(uniform.blockInfo.isRowMajorMatrix);
+
+      default:
+        UNREACHABLE();
+        break;
+    }
+    return 0;
+}
+
+bool ProgramBinary::isValidUniformLocation(GLint location) const
+{
+    ASSERT(rx::IsIntegerCastSafe<GLint>(mUniformIndex.size()));
+    return (location >= 0 && location < static_cast<GLint>(mUniformIndex.size()));
+}
+
+LinkedUniform *ProgramBinary::getUniformByLocation(GLint location) const
+{
+    ASSERT(location >= 0 && static_cast<size_t>(location) < mUniformIndex.size());
+    return mUniforms[mUniformIndex[location].index];
+}
+
+LinkedUniform *ProgramBinary::getUniformByName(const std::string &name) const
+{
+    for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); uniformIndex++)
+    {
+        if (mUniforms[uniformIndex]->name == name)
+        {
+            return mUniforms[uniformIndex];
+        }
+    }
+
+    return NULL;
+}
+
+void ProgramBinary::getActiveUniformBlockName(GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName) const
+{
+    ASSERT(uniformBlockIndex < mUniformBlocks.size());   // index must be smaller than getActiveUniformBlockCount()
+
+    const UniformBlock &uniformBlock = *mUniformBlocks[uniformBlockIndex];
+
+    if (bufSize > 0)
+    {
+        std::string string = uniformBlock.name;
+
+        if (uniformBlock.isArrayElement())
+        {
+            string += ArrayString(uniformBlock.elementIndex);
+        }
+
+        strncpy(uniformBlockName, string.c_str(), bufSize);
+        uniformBlockName[bufSize - 1] = '\0';
+
+        if (length)
+        {
+            *length = strlen(uniformBlockName);
+        }
+    }
+}
+
+void ProgramBinary::getActiveUniformBlockiv(GLuint uniformBlockIndex, GLenum pname, GLint *params) const
+{
+    ASSERT(uniformBlockIndex < mUniformBlocks.size());   // index must be smaller than getActiveUniformBlockCount()
+
+    const UniformBlock &uniformBlock = *mUniformBlocks[uniformBlockIndex];
+
+    switch (pname)
+    {
+      case GL_UNIFORM_BLOCK_DATA_SIZE:
+        *params = static_cast<GLint>(uniformBlock.dataSize);
+        break;
+      case GL_UNIFORM_BLOCK_NAME_LENGTH:
+        *params = static_cast<GLint>(uniformBlock.name.size() + 1 + (uniformBlock.isArrayElement() ? 3 : 0));
+        break;
+      case GL_UNIFORM_BLOCK_ACTIVE_UNIFORMS:
+        *params = static_cast<GLint>(uniformBlock.memberUniformIndexes.size());
+        break;
+      case GL_UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES:
+        {
+            for (unsigned int blockMemberIndex = 0; blockMemberIndex < uniformBlock.memberUniformIndexes.size(); blockMemberIndex++)
+            {
+                params[blockMemberIndex] = static_cast<GLint>(uniformBlock.memberUniformIndexes[blockMemberIndex]);
+            }
+        }
+        break;
+      case GL_UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER:
+        *params = static_cast<GLint>(uniformBlock.isReferencedByVertexShader());
+        break;
+      case GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER:
+        *params = static_cast<GLint>(uniformBlock.isReferencedByFragmentShader());
+        break;
+      default: UNREACHABLE();
+    }
+}
+
+GLuint ProgramBinary::getActiveUniformBlockCount() const
+{
+    return mUniformBlocks.size();
+}
+
+GLuint ProgramBinary::getActiveUniformBlockMaxLength() const
+{
+    unsigned int maxLength = 0;
+
+    unsigned int numUniformBlocks = mUniformBlocks.size();
+    for (unsigned int uniformBlockIndex = 0; uniformBlockIndex < numUniformBlocks; uniformBlockIndex++)
+    {
+        const UniformBlock &uniformBlock = *mUniformBlocks[uniformBlockIndex];
+        if (!uniformBlock.name.empty())
+        {
+            const unsigned int length = uniformBlock.name.length() + 1;
+
+            // Counting in "[0]".
+            const unsigned int arrayLength = (uniformBlock.isArrayElement() ? 3 : 0);
+
+            maxLength = std::max(length + arrayLength, maxLength);
+        }
+    }
+
+    return maxLength;
+}
+
+void ProgramBinary::validate(InfoLog &infoLog, const Caps &caps)
 {
     applyUniforms();
-    if (!validateSamplers(&infoLog))
+    if (!validateSamplers(&infoLog, caps))
     {
         mValidated = false;
     }
@@ -2513,39 +2663,34 @@ void ProgramBinary::validate(InfoLog &infoLog)
     }
 }
 
-bool ProgramBinary::validateSamplers(InfoLog *infoLog)
+bool ProgramBinary::validateSamplers(InfoLog *infoLog, const Caps &caps)
 {
     // if any two active samplers in a program are of different types, but refer to the same
     // texture image unit, and this is the current program, then ValidateProgram will fail, and
     // DrawArrays and DrawElements will issue the INVALID_OPERATION error.
+    updateSamplerMapping();
 
-    const unsigned int maxCombinedTextureImageUnits = mRenderer->getMaxCombinedTextureImageUnits();
-    TextureType textureUnitType[IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS];
-
-    for (unsigned int i = 0; i < IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS; ++i)
-    {
-        textureUnitType[i] = TEXTURE_UNKNOWN;
-    }
+    std::vector<GLenum> textureUnitTypes(caps.maxCombinedTextureImageUnits, GL_NONE);
 
     for (unsigned int i = 0; i < mUsedPixelSamplerRange; ++i)
     {
         if (mSamplersPS[i].active)
         {
             unsigned int unit = mSamplersPS[i].logicalTextureUnit;
-            
-            if (unit >= maxCombinedTextureImageUnits)
+
+            if (unit >= textureUnitTypes.size())
             {
                 if (infoLog)
                 {
-                    infoLog->append("Sampler uniform (%d) exceeds IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS (%d)", unit, maxCombinedTextureImageUnits);
+                    infoLog->append("Sampler uniform (%d) exceeds GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (%d)", unit, textureUnitTypes.size());
                 }
 
                 return false;
             }
 
-            if (textureUnitType[unit] != TEXTURE_UNKNOWN)
+            if (textureUnitTypes[unit] != GL_NONE)
             {
-                if (mSamplersPS[i].textureType != textureUnitType[unit])
+                if (mSamplersPS[i].textureType != textureUnitTypes[unit])
                 {
                     if (infoLog)
                     {
@@ -2557,7 +2702,7 @@ bool ProgramBinary::validateSamplers(InfoLog *infoLog)
             }
             else
             {
-                textureUnitType[unit] = mSamplersPS[i].textureType;
+                textureUnitTypes[unit] = mSamplersPS[i].textureType;
             }
         }
     }
@@ -2567,20 +2712,20 @@ bool ProgramBinary::validateSamplers(InfoLog *infoLog)
         if (mSamplersVS[i].active)
         {
             unsigned int unit = mSamplersVS[i].logicalTextureUnit;
-            
-            if (unit >= maxCombinedTextureImageUnits)
+
+            if (unit >= textureUnitTypes.size())
             {
                 if (infoLog)
                 {
-                    infoLog->append("Sampler uniform (%d) exceeds IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS (%d)", unit, maxCombinedTextureImageUnits);
+                    infoLog->append("Sampler uniform (%d) exceeds GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (%d)", unit, textureUnitTypes.size());
                 }
 
                 return false;
             }
 
-            if (textureUnitType[unit] != TEXTURE_UNKNOWN)
+            if (textureUnitTypes[unit] != GL_NONE)
             {
-                if (mSamplersVS[i].textureType != textureUnitType[unit])
+                if (mSamplersVS[i].textureType != textureUnitTypes[unit])
                 {
                     if (infoLog)
                     {
@@ -2592,7 +2737,7 @@ bool ProgramBinary::validateSamplers(InfoLog *infoLog)
             }
             else
             {
-                textureUnitType[unit] = mSamplersVS[i].textureType;
+                textureUnitTypes[unit] = mSamplersVS[i].textureType;
             }
         }
     }
@@ -2600,7 +2745,7 @@ bool ProgramBinary::validateSamplers(InfoLog *infoLog)
     return true;
 }
 
-ProgramBinary::Sampler::Sampler() : active(false), logicalTextureUnit(0), textureType(TEXTURE_2D)
+ProgramBinary::Sampler::Sampler() : active(false), logicalTextureUnit(0), textureType(GL_TEXTURE_2D)
 {
 }
 
@@ -2648,4 +2793,33 @@ void ProgramBinary::sortAttributesByLayout(rx::TranslatedAttribute attributes[MA
     }
 }
 
+void ProgramBinary::reset()
+{
+    SafeDeleteContainer(mVertexExecutables);
+    SafeDeleteContainer(mPixelExecutables);
+
+    SafeDelete(mGeometryExecutable);
+
+    mTransformFeedbackBufferMode = GL_NONE;
+    mTransformFeedbackLinkedVaryings.clear();
+
+    mSamplersPS.clear();
+    mSamplersVS.clear();
+
+    mUsedVertexSamplerRange = 0;
+    mUsedPixelSamplerRange = 0;
+    mUsesPointSize = false;
+    mShaderVersion = 0;
+    mDirtySamplerMapping = true;
+
+    SafeDeleteContainer(mUniforms);
+    SafeDeleteContainer(mUniformBlocks);
+    mUniformIndex.clear();
+    mOutputVariables.clear();
+
+    mProgram->reset();
+
+    mValidated = false;
+}
+
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.h b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.h
index d6320863f2..ad470d417b 100644
--- a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.h
+++ b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,94 +10,152 @@
 #ifndef LIBGLESV2_PROGRAM_BINARY_H_
 #define LIBGLESV2_PROGRAM_BINARY_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
-#include <GLES2/gl2ext.h>
-
-#include <string>
-#include <vector>
-
 #include "common/RefCountObject.h"
 #include "angletypes.h"
-#include "libGLESv2/mathutil.h"
+#include "common/mathutil.h"
 #include "libGLESv2/Uniform.h"
 #include "libGLESv2/Shader.h"
 #include "libGLESv2/Constants.h"
+#include "libGLESv2/renderer/d3d/VertexDataManager.h"
+#include "libGLESv2/renderer/d3d/DynamicHLSL.h"
+
+#include "angle_gl.h"
+
+#include <string>
+#include <vector>
+
+// TODO(jmadill): place this in workarounds library
+#define ANGLE_WORKAROUND_ENABLED 1
+#define ANGLE_WORKAROUND_DISABLED 2
+#define ANGLE_MRT_PERF_WORKAROUND ANGLE_WORKAROUND_ENABLED
+
+namespace sh
+{
+class HLSLBlockEncoder;
+}
+
+#include <GLES3/gl3.h>
+#include <GLES2/gl2.h>
+#include <GLES2/gl2ext.h>
+
+#include <string>
+#include <vector>
 
 namespace rx
 {
 class ShaderExecutable;
 class Renderer;
 struct TranslatedAttribute;
+class UniformStorage;
+class ProgramImpl;
 }
 
 namespace gl
 {
-class FragmentShader;
-class VertexShader;
+struct Caps;
+class Shader;
 class InfoLog;
 class AttributeBindings;
-struct Varying;
+class Buffer;
+class Framebuffer;
 
 // Struct used for correlating uniforms/elements of uniform arrays to handles
-struct UniformLocation
+struct VariableLocation
 {
-    UniformLocation()
+    VariableLocation()
     {
     }
 
-    UniformLocation(const std::string &name, unsigned int element, unsigned int index);
+    VariableLocation(const std::string &name, unsigned int element, unsigned int index);
 
     std::string name;
     unsigned int element;
     unsigned int index;
 };
 
+struct LinkedVarying
+{
+    LinkedVarying();
+    LinkedVarying(const std::string &name, GLenum type, GLsizei size, const std::string &semanticName,
+                  unsigned int semanticIndex, unsigned int semanticIndexCount);
+
+    // Original GL name
+    std::string name;
+
+    GLenum type;
+    GLsizei size;
+
+    // DirectX semantic information
+    std::string semanticName;
+    unsigned int semanticIndex;
+    unsigned int semanticIndexCount;
+};
+
 // This is the result of linking a program. It is the state that would be passed to ProgramBinary.
 class ProgramBinary : public RefCountObject
 {
   public:
-    explicit ProgramBinary(rx::Renderer *renderer);
+    explicit ProgramBinary(rx::ProgramImpl *impl);
     ~ProgramBinary();
 
-    rx::ShaderExecutable *getPixelExecutable();
-    rx::ShaderExecutable *getVertexExecutable();
-    rx::ShaderExecutable *getGeometryExecutable();
+    rx::ProgramImpl *getImplementation() { return mProgram; }
+    const rx::ProgramImpl *getImplementation() const { return mProgram; }
+
+    rx::ShaderExecutable *getPixelExecutableForFramebuffer(const Framebuffer *fbo);
+    rx::ShaderExecutable *getPixelExecutableForOutputLayout(const std::vector<GLenum> &outputLayout);
+    rx::ShaderExecutable *getVertexExecutableForInputLayout(const VertexFormat inputLayout[MAX_VERTEX_ATTRIBS]);
+    rx::ShaderExecutable *getGeometryExecutable() const;
 
     GLuint getAttributeLocation(const char *name);
     int getSemanticIndex(int attributeIndex);
 
-    GLint getSamplerMapping(SamplerType type, unsigned int samplerIndex);
-    TextureType getSamplerTextureType(SamplerType type, unsigned int samplerIndex);
+    GLint getSamplerMapping(SamplerType type, unsigned int samplerIndex, const Caps &caps);
+    GLenum getSamplerTextureType(SamplerType type, unsigned int samplerIndex);
     GLint getUsedSamplerRange(SamplerType type);
     bool usesPointSize() const;
     bool usesPointSpriteEmulation() const;
     bool usesGeometryShader() const;
 
     GLint getUniformLocation(std::string name);
-    bool setUniform1fv(GLint location, GLsizei count, const GLfloat *v);
-    bool setUniform2fv(GLint location, GLsizei count, const GLfloat *v);
-    bool setUniform3fv(GLint location, GLsizei count, const GLfloat *v);
-    bool setUniform4fv(GLint location, GLsizei count, const GLfloat *v);
-    bool setUniformMatrix2fv(GLint location, GLsizei count, const GLfloat *value);
-    bool setUniformMatrix3fv(GLint location, GLsizei count, const GLfloat *value);
-    bool setUniformMatrix4fv(GLint location, GLsizei count, const GLfloat *value);
-    bool setUniform1iv(GLint location, GLsizei count, const GLint *v);
-    bool setUniform2iv(GLint location, GLsizei count, const GLint *v);
-    bool setUniform3iv(GLint location, GLsizei count, const GLint *v);
-    bool setUniform4iv(GLint location, GLsizei count, const GLint *v);
-
-    bool getUniformfv(GLint location, GLsizei *bufSize, GLfloat *params);
-    bool getUniformiv(GLint location, GLsizei *bufSize, GLint *params);
+    GLuint getUniformIndex(std::string name);
+    GLuint getUniformBlockIndex(std::string name);
+    void setUniform1fv(GLint location, GLsizei count, const GLfloat *v);
+    void setUniform2fv(GLint location, GLsizei count, const GLfloat *v);
+    void setUniform3fv(GLint location, GLsizei count, const GLfloat *v);
+    void setUniform4fv(GLint location, GLsizei count, const GLfloat *v);
+    void setUniform1iv(GLint location, GLsizei count, const GLint *v);
+    void setUniform2iv(GLint location, GLsizei count, const GLint *v);
+    void setUniform3iv(GLint location, GLsizei count, const GLint *v);
+    void setUniform4iv(GLint location, GLsizei count, const GLint *v);
+    void setUniform1uiv(GLint location, GLsizei count, const GLuint *v);
+    void setUniform2uiv(GLint location, GLsizei count, const GLuint *v);
+    void setUniform3uiv(GLint location, GLsizei count, const GLuint *v);
+    void setUniform4uiv(GLint location, GLsizei count, const GLuint *v);
+    void setUniformMatrix2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix2x3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix3x2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix2x4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix4x2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix3x4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+    void setUniformMatrix4x3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+
+    void getUniformfv(GLint location, GLfloat *params);
+    void getUniformiv(GLint location, GLint *params);
+    void getUniformuiv(GLint location, GLuint *params);
 
     void dirtyAllUniforms();
-    void applyUniforms();
 
-    bool load(InfoLog &infoLog, const void *binary, GLsizei length);
-    bool save(void* binary, GLsizei bufSize, GLsizei *length);
+    Error applyUniforms();
+    Error applyUniformBuffers(const std::vector<Buffer*> boundBuffers, const Caps &caps);
+
+    bool load(InfoLog &infoLog, GLenum binaryFormat, const void *binary, GLsizei length);
+    bool save(GLenum *binaryFormat, void *binary, GLsizei bufSize, GLsizei *length);
     GLint getLength();
 
-    bool link(InfoLog &infoLog, const AttributeBindings &attributeBindings, FragmentShader *fragmentShader, VertexShader *vertexShader);
+    bool link(InfoLog &infoLog, const AttributeBindings &attributeBindings, Shader *fragmentShader, Shader *vertexShader,
+              const std::vector<std::string>& transformFeedbackVaryings, GLenum transformFeedbackBufferMode, const Caps &caps);
     void getAttachedShaders(GLsizei maxCount, GLsizei *count, GLuint *shaders);
 
     void getActiveAttribute(GLuint index, GLsizei bufsize, GLsizei *length, GLint *size, GLenum *type, GLchar *name) const;
@@ -107,62 +165,157 @@ class ProgramBinary : public RefCountObject
     void getActiveUniform(GLuint index, GLsizei bufsize, GLsizei *length, GLint *size, GLenum *type, GLchar *name) const;
     GLint getActiveUniformCount() const;
     GLint getActiveUniformMaxLength() const;
+    GLint getActiveUniformi(GLuint index, GLenum pname) const;
+    bool isValidUniformLocation(GLint location) const;
+    LinkedUniform *getUniformByLocation(GLint location) const;
+    LinkedUniform *getUniformByName(const std::string &name) const;
+
+    void getActiveUniformBlockName(GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName) const;
+    void getActiveUniformBlockiv(GLuint uniformBlockIndex, GLenum pname, GLint *params) const;
+    GLuint getActiveUniformBlockCount() const;
+    GLuint getActiveUniformBlockMaxLength() const;
+    UniformBlock *getUniformBlockByIndex(GLuint blockIndex);
+
+    GLint getFragDataLocation(const char *name) const;
+
+    size_t getTransformFeedbackVaryingCount() const;
+    const LinkedVarying &getTransformFeedbackVarying(size_t idx) const;
+    GLenum getTransformFeedbackBufferMode() const;
 
-    void validate(InfoLog &infoLog);
-    bool validateSamplers(InfoLog *infoLog);
+    void validate(InfoLog &infoLog, const Caps &caps);
+    bool validateSamplers(InfoLog *infoLog, const Caps &caps);
     bool isValidated() const;
+    void updateSamplerMapping();
 
     unsigned int getSerial() const;
+    int getShaderVersion() const;
 
     void initAttributesByLayout();
-    void sortAttributesByLayout(rx::TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS], int sortedSemanticIndices[MAX_VERTEX_ATTRIBS]) const;
+    void sortAttributesByLayout(rx::TranslatedAttribute attributes[MAX_VERTEX_ATTRIBS], int sortedSemanticIndices[MAX_VERTEX_ATTRIBS]) const;
 
-    static std::string decorateAttribute(const std::string &name);    // Prepend an underscore
+    const std::vector<LinkedUniform*> &getUniforms() const { return mUniforms; }
+
+    static bool linkVaryings(InfoLog &infoLog, Shader *fragmentShader, Shader *vertexShader);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(ProgramBinary);
 
-    int packVaryings(InfoLog &infoLog, const Varying *packing[][4], FragmentShader *fragmentShader);
-    bool linkVaryings(InfoLog &infoLog, int registers, const Varying *packing[][4],
-                      std::string& pixelHLSL, std::string& vertexHLSL,
-                      FragmentShader *fragmentShader, VertexShader *vertexShader);
+    struct Sampler
+    {
+        Sampler();
+
+        bool active;
+        GLint logicalTextureUnit;
+        GLenum textureType;
+    };
+
+    void reset();
+
+    bool linkAttributes(InfoLog &infoLog, const AttributeBindings &attributeBindings, const Shader *vertexShader);
+
+    static bool linkValidateVariablesBase(InfoLog &infoLog,
+                                          const std::string &variableName,
+                                          const sh::ShaderVariable &vertexVariable,
+                                          const sh::ShaderVariable &fragmentVariable,
+                                          bool validatePrecision);
+
+    static bool linkValidateUniforms(InfoLog &infoLog, const std::string &uniformName, const sh::Uniform &vertexUniform, const sh::Uniform &fragmentUniform);
+    static bool linkValidateVaryings(InfoLog &infoLog, const std::string &varyingName, const sh::Varying &vertexVarying, const sh::Varying &fragmentVarying);
+    static bool linkValidateInterfaceBlockFields(InfoLog &infoLog, const std::string &uniformName, const sh::InterfaceBlockField &vertexUniform, const sh::InterfaceBlockField &fragmentUniform);
+    bool linkUniforms(InfoLog &infoLog, const Shader &vertexShader, const Shader &fragmentShader, const Caps &caps);
+    void defineUniformBase(GLenum shader, const sh::Uniform &uniform, unsigned int uniformRegister);
+    void defineUniform(GLenum shader, const sh::ShaderVariable &uniform, const std::string &fullName, sh::HLSLBlockEncoder *encoder);
+    bool indexSamplerUniform(const LinkedUniform &uniform, InfoLog &infoLog, const Caps &caps);
+    bool indexUniforms(InfoLog &infoLog, const Caps &caps);
+    static bool assignSamplers(unsigned int startSamplerIndex, GLenum samplerType, unsigned int samplerCount,
+                               std::vector<Sampler> &outSamplers, GLuint *outUsedRange);
+    bool areMatchingInterfaceBlocks(InfoLog &infoLog, const sh::InterfaceBlock &vertexInterfaceBlock, const sh::InterfaceBlock &fragmentInterfaceBlock);
+    bool linkUniformBlocks(InfoLog &infoLog, const Shader &vertexShader, const Shader &fragmentShader, const Caps &caps);
+    bool gatherTransformFeedbackLinkedVaryings(InfoLog &infoLog, const std::vector<LinkedVarying> &linkedVaryings,
+                                               const std::vector<std::string> &transformFeedbackVaryingNames,
+                                               GLenum transformFeedbackBufferMode,
+                                               std::vector<LinkedVarying> *outTransformFeedbackLinkedVaryings,
+                                               const Caps &caps) const;
+    template <typename VarT>
+    void defineUniformBlockMembers(const std::vector<VarT> &fields, const std::string &prefix, int blockIndex,
+                                   sh::BlockLayoutEncoder *encoder, std::vector<unsigned int> *blockUniformIndexes,
+                                   bool inRowMajorLayout);
+    bool defineUniformBlock(InfoLog &infoLog, const Shader &shader, const sh::InterfaceBlock &interfaceBlock, const Caps &caps);
+    bool assignUniformBlockRegister(InfoLog &infoLog, UniformBlock *uniformBlock, GLenum shader, unsigned int registerIndex, const Caps &caps);
+    void defineOutputVariables(Shader *fragmentShader);
+
+    template <typename T>
+    void setUniform(GLint location, GLsizei count, const T* v, GLenum targetUniformType);
+
+    template <int cols, int rows>
+    void setUniformMatrixfv(GLint location, GLsizei count, GLboolean transpose, const GLfloat *value, GLenum targetUniformType);
+
+    template <typename T>
+    void getUniformv(GLint location, T *params, GLenum uniformType);
+
+    class VertexExecutable
+    {
+      public:
+        VertexExecutable(const VertexFormat inputLayout[MAX_VERTEX_ATTRIBS],
+                         const GLenum signature[MAX_VERTEX_ATTRIBS],
+                         rx::ShaderExecutable *shaderExecutable);
+        ~VertexExecutable();
+
+        bool matchesSignature(const GLenum convertedLayout[MAX_VERTEX_ATTRIBS]) const;
+
+        const VertexFormat *inputs() const { return mInputs; }
+        const GLenum *signature() const { return mSignature; }
+        rx::ShaderExecutable *shaderExecutable() const { return mShaderExecutable; }
+
+      private:
+        VertexFormat mInputs[MAX_VERTEX_ATTRIBS];
+        GLenum mSignature[MAX_VERTEX_ATTRIBS];
+        rx::ShaderExecutable *mShaderExecutable;
+    };
+
+    class PixelExecutable
+    {
+      public:
+        PixelExecutable(const std::vector<GLenum> &outputSignature, rx::ShaderExecutable *shaderExecutable);
+        ~PixelExecutable();
 
-    bool linkAttributes(InfoLog &infoLog, const AttributeBindings &attributeBindings, FragmentShader *fragmentShader, VertexShader *vertexShader);
+        bool matchesSignature(const std::vector<GLenum> &signature) const { return mOutputSignature == signature; }
 
-    bool linkUniforms(InfoLog &infoLog, const sh::ActiveUniforms &vertexUniforms, const sh::ActiveUniforms &fragmentUniforms);
-    bool defineUniform(GLenum shader, const sh::Uniform &constant, InfoLog &infoLog);
-    
-    std::string generateGeometryShaderHLSL(int registers, const Varying *packing[][4], FragmentShader *fragmentShader, VertexShader *vertexShader) const;
-    std::string generatePointSpriteHLSL(int registers, const Varying *packing[][4], FragmentShader *fragmentShader, VertexShader *vertexShader) const;
+        const std::vector<GLenum> &outputSignature() const { return mOutputSignature; }
+        rx::ShaderExecutable *shaderExecutable() const { return mShaderExecutable; }
 
-    rx::Renderer *const mRenderer;
+      private:
+        std::vector<GLenum> mOutputSignature;
+        rx::ShaderExecutable *mShaderExecutable;
+    };
+
+    rx::ProgramImpl *mProgram;
+
+    std::vector<VertexExecutable *> mVertexExecutables;
+    std::vector<PixelExecutable *> mPixelExecutables;
 
-    rx::ShaderExecutable *mPixelExecutable;
-    rx::ShaderExecutable *mVertexExecutable;
     rx::ShaderExecutable *mGeometryExecutable;
 
-    Attribute mLinkedAttribute[MAX_VERTEX_ATTRIBS];
+    sh::Attribute mLinkedAttribute[MAX_VERTEX_ATTRIBS];
+    sh::Attribute mShaderAttributes[MAX_VERTEX_ATTRIBS];
     int mSemanticIndex[MAX_VERTEX_ATTRIBS];
     int mAttributesByLayout[MAX_VERTEX_ATTRIBS];
 
-    struct Sampler
-    {
-        Sampler();
-
-        bool active;
-        GLint logicalTextureUnit;
-        TextureType textureType;
-    };
+    GLenum mTransformFeedbackBufferMode;
+    std::vector<LinkedVarying> mTransformFeedbackLinkedVaryings;
 
-    Sampler mSamplersPS[MAX_TEXTURE_IMAGE_UNITS];
-    Sampler mSamplersVS[IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
+    std::vector<Sampler> mSamplersPS;
+    std::vector<Sampler> mSamplersVS;
     GLuint mUsedVertexSamplerRange;
     GLuint mUsedPixelSamplerRange;
     bool mUsesPointSize;
+    int mShaderVersion;
+    bool mDirtySamplerMapping;
 
-    UniformArray mUniforms;
-    typedef std::vector<UniformLocation> UniformIndex;
-    UniformIndex mUniformIndex;
+    std::vector<LinkedUniform*> mUniforms;
+    std::vector<UniformBlock*> mUniformBlocks;
+    std::vector<VariableLocation> mUniformIndex;
+    std::map<int, VariableLocation> mOutputVariables;
 
     bool mValidated;
 
@@ -171,6 +324,7 @@ class ProgramBinary : public RefCountObject
     static unsigned int issueSerial();
     static unsigned int mCurrentSerial;
 };
+
 }
 
 #endif   // LIBGLESV2_PROGRAM_BINARY_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/Query.cpp b/src/3rdparty/angle/src/libGLESv2/Query.cpp
index bd987954f1..4ee3525509 100644
--- a/src/3rdparty/angle/src/libGLESv2/Query.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Query.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -9,39 +8,38 @@
 
 #include "libGLESv2/Query.h"
 #include "libGLESv2/renderer/QueryImpl.h"
-#include "libGLESv2/renderer/Renderer.h"
 
 namespace gl
 {
-
-Query::Query(rx::Renderer *renderer, GLenum type, GLuint id) : RefCountObject(id)
-{ 
-    mQuery = renderer->createQuery(type);
+Query::Query(rx::QueryImpl *impl, GLuint id)
+    : RefCountObject(id),
+      mQuery(impl)
+{
 }
 
 Query::~Query()
 {
-    delete mQuery;
+    SafeDelete(mQuery);
 }
 
-void Query::begin()
+Error Query::begin()
 {
-    mQuery->begin();
+    return mQuery->begin();
 }
 
-void Query::end()
+Error Query::end()
 {
-    mQuery->end();
+    return mQuery->end();
 }
 
-GLuint Query::getResult()
+Error Query::getResult(GLuint *params)
 {
-    return mQuery->getResult();
+    return mQuery->getResult(params);
 }
 
-GLboolean Query::isResultAvailable()
+Error Query::isResultAvailable(GLuint *available)
 {
-    return mQuery->isResultAvailable();
+    return mQuery->isResultAvailable(available);
 }
 
 GLenum Query::getType() const
diff --git a/src/3rdparty/angle/src/libGLESv2/Query.h b/src/3rdparty/angle/src/libGLESv2/Query.h
index e9b95b729b..a7ec404f85 100644
--- a/src/3rdparty/angle/src/libGLESv2/Query.h
+++ b/src/3rdparty/angle/src/libGLESv2/Query.h
@@ -9,15 +9,14 @@
 #ifndef LIBGLESV2_QUERY_H_
 #define LIBGLESV2_QUERY_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
-
+#include "libGLESv2/Error.h"
 #include "common/angleutils.h"
 #include "common/RefCountObject.h"
 
+#include "angle_gl.h"
+
 namespace rx
 {
-class Renderer;
 class QueryImpl;
 }
 
@@ -27,14 +26,14 @@ namespace gl
 class Query : public RefCountObject
 {
   public:
-    Query(rx::Renderer *renderer, GLenum type, GLuint id);
+    Query(rx::QueryImpl *impl, GLuint id);
     virtual ~Query();
 
-    void begin();
-    void end();
+    Error begin();
+    Error end();
 
-    GLuint getResult();
-    GLboolean isResultAvailable();
+    Error getResult(GLuint *params);
+    Error isResultAvailable(GLuint *available);
 
     GLenum getType() const;
 
diff --git a/src/3rdparty/angle/src/libGLESv2/Renderbuffer.cpp b/src/3rdparty/angle/src/libGLESv2/Renderbuffer.cpp
index 98d33ec6c3..9406fce58d 100644
--- a/src/3rdparty/angle/src/libGLESv2/Renderbuffer.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Renderbuffer.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -10,312 +9,105 @@
 // objects and related functionality. [OpenGL ES 2.0.24] section 4.4.3 page 108.
 
 #include "libGLESv2/Renderbuffer.h"
-#include "libGLESv2/renderer/RenderTarget.h"
-
 #include "libGLESv2/Texture.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/FramebufferAttachment.h"
 #include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/utilities.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+
+#include "common/utilities.h"
 
 namespace gl
 {
 unsigned int RenderbufferStorage::mCurrentSerial = 1;
 
-RenderbufferInterface::RenderbufferInterface()
-{
-}
-
-// The default case for classes inherited from RenderbufferInterface is not to
-// need to do anything upon the reference count to the parent Renderbuffer incrementing
-// or decrementing. 
-void RenderbufferInterface::addProxyRef(const Renderbuffer *proxy)
-{
-}
-
-void RenderbufferInterface::releaseProxy(const Renderbuffer *proxy)
-{
-}
-
-GLuint RenderbufferInterface::getRedSize() const
-{
-    return gl::GetRedSize(getActualFormat());
-}
-
-GLuint RenderbufferInterface::getGreenSize() const
-{
-    return gl::GetGreenSize(getActualFormat());
-}
-
-GLuint RenderbufferInterface::getBlueSize() const
-{
-    return gl::GetBlueSize(getActualFormat());
-}
-
-GLuint RenderbufferInterface::getAlphaSize() const
-{
-    return gl::GetAlphaSize(getActualFormat());
-}
-
-GLuint RenderbufferInterface::getDepthSize() const
-{
-    return gl::GetDepthSize(getActualFormat());
-}
-
-GLuint RenderbufferInterface::getStencilSize() const
-{
-    return gl::GetStencilSize(getActualFormat());
-}
-
-///// RenderbufferTexture2D Implementation ////////
-
-RenderbufferTexture2D::RenderbufferTexture2D(Texture2D *texture, GLenum target) : mTarget(target)
-{
-    mTexture2D.set(texture);
-}
-
-RenderbufferTexture2D::~RenderbufferTexture2D()
-{
-    mTexture2D.set(NULL);
-}
-
-// Textures need to maintain their own reference count for references via
-// Renderbuffers acting as proxies. Here, we notify the texture of a reference.
-void RenderbufferTexture2D::addProxyRef(const Renderbuffer *proxy)
-{
-    mTexture2D->addProxyRef(proxy);
-}
-
-void RenderbufferTexture2D::releaseProxy(const Renderbuffer *proxy)
-{
-    mTexture2D->releaseProxy(proxy);
-}
-
-rx::RenderTarget *RenderbufferTexture2D::getRenderTarget()
-{
-    return mTexture2D->getRenderTarget(mTarget);
-}
-
-rx::RenderTarget *RenderbufferTexture2D::getDepthStencil()
-{
-    return mTexture2D->getDepthStencil(mTarget);
-}
-
-GLsizei RenderbufferTexture2D::getWidth() const
-{
-    return mTexture2D->getWidth(0);
-}
-
-GLsizei RenderbufferTexture2D::getHeight() const
-{
-    return mTexture2D->getHeight(0);
-}
-
-GLenum RenderbufferTexture2D::getInternalFormat() const
-{
-    return mTexture2D->getInternalFormat(0);
-}
-
-GLenum RenderbufferTexture2D::getActualFormat() const
-{
-    return mTexture2D->getActualFormat(0);
-}
-
-GLsizei RenderbufferTexture2D::getSamples() const
-{
-    return 0;
-}
-
-unsigned int RenderbufferTexture2D::getSerial() const
-{
-    return mTexture2D->getRenderTargetSerial(mTarget);
-}
-
-unsigned int RenderbufferTexture2D::getTextureSerial() const
-{
-    return mTexture2D->getTextureSerial();
-}
-
-///// RenderbufferTextureCubeMap Implementation ////////
-
-RenderbufferTextureCubeMap::RenderbufferTextureCubeMap(TextureCubeMap *texture, GLenum target) : mTarget(target)
-{
-    mTextureCubeMap.set(texture);
-}
-
-RenderbufferTextureCubeMap::~RenderbufferTextureCubeMap()
-{
-    mTextureCubeMap.set(NULL);
-}
-
-// Textures need to maintain their own reference count for references via
-// Renderbuffers acting as proxies. Here, we notify the texture of a reference.
-void RenderbufferTextureCubeMap::addProxyRef(const Renderbuffer *proxy)
-{
-    mTextureCubeMap->addProxyRef(proxy);
-}
-
-void RenderbufferTextureCubeMap::releaseProxy(const Renderbuffer *proxy)
+Renderbuffer::Renderbuffer(GLuint id, RenderbufferStorage *newStorage)
+  : RefCountObject(id),
+    mStorage(newStorage)
 {
-    mTextureCubeMap->releaseProxy(proxy);
-}
-
-rx::RenderTarget *RenderbufferTextureCubeMap::getRenderTarget()
-{
-    return mTextureCubeMap->getRenderTarget(mTarget);
-}
-
-rx::RenderTarget *RenderbufferTextureCubeMap::getDepthStencil()
-{
-    return NULL;
-}
-
-GLsizei RenderbufferTextureCubeMap::getWidth() const
-{
-    return mTextureCubeMap->getWidth(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0);
-}
-
-GLsizei RenderbufferTextureCubeMap::getHeight() const
-{
-    return mTextureCubeMap->getHeight(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0);
-}
-
-GLenum RenderbufferTextureCubeMap::getInternalFormat() const
-{
-    return mTextureCubeMap->getInternalFormat(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0);
-}
-
-GLenum RenderbufferTextureCubeMap::getActualFormat() const
-{
-    return mTextureCubeMap->getActualFormat(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0);
-}
-
-GLsizei RenderbufferTextureCubeMap::getSamples() const
-{
-    return 0;
-}
-
-unsigned int RenderbufferTextureCubeMap::getSerial() const
-{
-    return mTextureCubeMap->getRenderTargetSerial(mTarget);
-}
-
-unsigned int RenderbufferTextureCubeMap::getTextureSerial() const
-{
-    return mTextureCubeMap->getTextureSerial();
-}
-
-////// Renderbuffer Implementation //////
-
-Renderbuffer::Renderbuffer(rx::Renderer *renderer, GLuint id, RenderbufferInterface *instance) : RefCountObject(id)
-{
-    ASSERT(instance != NULL);
-    mInstance = instance;
+    ASSERT(mStorage);
 }
 
 Renderbuffer::~Renderbuffer()
 {
-    delete mInstance;
-}
-
-// The RenderbufferInterface contained in this Renderbuffer may need to maintain
-// its own reference count, so we pass it on here.
-void Renderbuffer::addRef() const
-{
-    mInstance->addProxyRef(this);
-
-    RefCountObject::addRef();
+    SafeDelete(mStorage);
 }
 
-void Renderbuffer::release() const
+void Renderbuffer::setStorage(RenderbufferStorage *newStorage)
 {
-    mInstance->releaseProxy(this);
+    ASSERT(newStorage);
 
-    RefCountObject::release();
-}
-
-rx::RenderTarget *Renderbuffer::getRenderTarget()
-{
-    return mInstance->getRenderTarget();
+    SafeDelete(mStorage);
+    mStorage = newStorage;
 }
 
-rx::RenderTarget *Renderbuffer::getDepthStencil()
+RenderbufferStorage *Renderbuffer::getStorage()
 {
-    return mInstance->getDepthStencil();
+    ASSERT(mStorage);
+    return mStorage;
 }
 
 GLsizei Renderbuffer::getWidth() const
 {
-    return mInstance->getWidth();
+    ASSERT(mStorage);
+    return mStorage->getWidth();
 }
 
 GLsizei Renderbuffer::getHeight() const
 {
-    return mInstance->getHeight();
+    ASSERT(mStorage);
+    return mStorage->getHeight();
 }
 
 GLenum Renderbuffer::getInternalFormat() const
 {
-    return mInstance->getInternalFormat();
+    ASSERT(mStorage);
+    return mStorage->getInternalFormat();
 }
 
 GLenum Renderbuffer::getActualFormat() const
 {
-    return mInstance->getActualFormat();
+    ASSERT(mStorage);
+    return mStorage->getActualFormat();
+}
+
+GLsizei Renderbuffer::getSamples() const
+{
+    ASSERT(mStorage);
+    return mStorage->getSamples();
 }
 
 GLuint Renderbuffer::getRedSize() const
 {
-    return mInstance->getRedSize();
+    return GetInternalFormatInfo(getActualFormat()).redBits;
 }
 
 GLuint Renderbuffer::getGreenSize() const
 {
-    return mInstance->getGreenSize();
+    return GetInternalFormatInfo(getActualFormat()).greenBits;
 }
 
 GLuint Renderbuffer::getBlueSize() const
 {
-    return mInstance->getBlueSize();
+    return GetInternalFormatInfo(getActualFormat()).blueBits;
 }
 
 GLuint Renderbuffer::getAlphaSize() const
 {
-    return mInstance->getAlphaSize();
+    return GetInternalFormatInfo(getActualFormat()).alphaBits;
 }
 
 GLuint Renderbuffer::getDepthSize() const
 {
-    return mInstance->getDepthSize();
+    return GetInternalFormatInfo(getActualFormat()).depthBits;
 }
 
 GLuint Renderbuffer::getStencilSize() const
 {
-    return mInstance->getStencilSize();
-}
-
-GLsizei Renderbuffer::getSamples() const
-{
-    return mInstance->getSamples();
-}
-
-unsigned int Renderbuffer::getSerial() const
-{
-    return mInstance->getSerial();
-}
-
-unsigned int Renderbuffer::getTextureSerial() const
-{
-    return mInstance->getTextureSerial();
-}
-
-void Renderbuffer::setStorage(RenderbufferStorage *newStorage)
-{
-    ASSERT(newStorage != NULL);
-
-    delete mInstance;
-    mInstance = newStorage;
+    return GetInternalFormatInfo(getActualFormat()).stencilBits;
 }
 
-RenderbufferStorage::RenderbufferStorage() : mSerial(issueSerial())
+RenderbufferStorage::RenderbufferStorage() : mSerial(issueSerials(1))
 {
     mWidth = 0;
     mHeight = 0;
@@ -333,11 +125,6 @@ rx::RenderTarget *RenderbufferStorage::getRenderTarget()
     return NULL;
 }
 
-rx::RenderTarget *RenderbufferStorage::getDepthStencil()
-{
-    return NULL;
-}
-
 GLsizei RenderbufferStorage::getWidth() const
 {
     return mWidth;
@@ -368,16 +155,21 @@ unsigned int RenderbufferStorage::getSerial() const
     return mSerial;
 }
 
-unsigned int RenderbufferStorage::issueSerial()
+unsigned int RenderbufferStorage::issueSerials(unsigned int count)
+{
+    unsigned int firstSerial = mCurrentSerial;
+    mCurrentSerial += count;
+    return firstSerial;
+}
+
+bool RenderbufferStorage::isTexture() const
 {
-    return mCurrentSerial++;
+    return false;
 }
 
-unsigned int RenderbufferStorage::issueCubeSerials()
+unsigned int RenderbufferStorage::getTextureSerial() const
 {
-    unsigned int firstSerial = mCurrentSerial;
-    mCurrentSerial += 6;
-    return firstSerial;
+    return -1;
 }
 
 Colorbuffer::Colorbuffer(rx::Renderer *renderer, rx::SwapChain *swapChain)
@@ -396,7 +188,7 @@ Colorbuffer::Colorbuffer(rx::Renderer *renderer, rx::SwapChain *swapChain)
 
 Colorbuffer::Colorbuffer(rx::Renderer *renderer, int width, int height, GLenum format, GLsizei samples) : mRenderTarget(NULL)
 {
-    mRenderTarget = renderer->createRenderTarget(width, height, format, samples, false);
+    mRenderTarget = renderer->createRenderTarget(width, height, format, samples);
 
     if (mRenderTarget)
     {
@@ -418,12 +210,7 @@ Colorbuffer::~Colorbuffer()
 
 rx::RenderTarget *Colorbuffer::getRenderTarget()
 {
-    if (mRenderTarget)
-    {
-        return mRenderTarget;
-    }
-
-    return NULL;
+    return mRenderTarget;
 }
 
 DepthStencilbuffer::DepthStencilbuffer(rx::Renderer *renderer, rx::SwapChain *swapChain)
@@ -442,7 +229,7 @@ DepthStencilbuffer::DepthStencilbuffer(rx::Renderer *renderer, rx::SwapChain *sw
 DepthStencilbuffer::DepthStencilbuffer(rx::Renderer *renderer, int width, int height, GLsizei samples)
 {
 
-    mDepthStencil = renderer->createRenderTarget(width, height, GL_DEPTH24_STENCIL8_OES, samples, true);
+    mDepthStencil = renderer->createRenderTarget(width, height, GL_DEPTH24_STENCIL8_OES, samples);
 
     mWidth = mDepthStencil->getWidth();
     mHeight = mDepthStencil->getHeight();
@@ -459,14 +246,9 @@ DepthStencilbuffer::~DepthStencilbuffer()
     }
 }
 
-rx::RenderTarget *DepthStencilbuffer::getDepthStencil()
+rx::RenderTarget *DepthStencilbuffer::getRenderTarget()
 {
-    if (mDepthStencil)
-    {
-        return mDepthStencil;
-    }
-
-    return NULL;
+    return mDepthStencil;
 }
 
 Depthbuffer::Depthbuffer(rx::Renderer *renderer, int width, int height, GLsizei samples) : DepthStencilbuffer(renderer, width, height, samples)
diff --git a/src/3rdparty/angle/src/libGLESv2/Renderbuffer.h b/src/3rdparty/angle/src/libGLESv2/Renderbuffer.h
index d46fd44557..71bcb0e1f8 100644
--- a/src/3rdparty/angle/src/libGLESv2/Renderbuffer.h
+++ b/src/3rdparty/angle/src/libGLESv2/Renderbuffer.h
@@ -12,8 +12,7 @@
 #ifndef LIBGLESV2_RENDERBUFFER_H_
 #define LIBGLESV2_RENDERBUFFER_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
+#include "angle_gl.h"
 
 #include "common/angleutils.h"
 #include "common/RefCountObject.h"
@@ -23,35 +22,33 @@ namespace rx
 class Renderer;
 class SwapChain;
 class RenderTarget;
+class TextureStorage;
 }
 
 namespace gl
 {
-class Texture2D;
-class TextureCubeMap;
-class Renderbuffer;
-class Colorbuffer;
-class DepthStencilbuffer;
+class RenderbufferStorage;
+class FramebufferAttachment;
 
-class RenderbufferInterface
+// A GL renderbuffer object is usually used as a depth or stencil buffer attachment
+// for a framebuffer object. The renderbuffer itself is a distinct GL object, see
+// FramebufferAttachment and Framebuffer for how they are applied to an FBO via an
+// attachment point.
+
+class Renderbuffer : public RefCountObject
 {
   public:
-    RenderbufferInterface();
-
-    virtual ~RenderbufferInterface() {};
-
-    virtual void addProxyRef(const Renderbuffer *proxy);
-    virtual void releaseProxy(const Renderbuffer *proxy);
-
-    virtual rx::RenderTarget *getRenderTarget() = 0;
-    virtual rx::RenderTarget *getDepthStencil() = 0;
+    Renderbuffer(GLuint id, RenderbufferStorage *newStorage);
+    virtual ~Renderbuffer();
 
-    virtual GLsizei getWidth() const = 0;
-    virtual GLsizei getHeight() const = 0;
-    virtual GLenum getInternalFormat() const = 0;
-    virtual GLenum getActualFormat() const = 0;
-    virtual GLsizei getSamples() const = 0;
+    void setStorage(RenderbufferStorage *newStorage);
+    RenderbufferStorage *getStorage();
 
+    GLsizei getWidth() const;
+    GLsizei getHeight() const;
+    GLenum getInternalFormat() const;
+    GLenum getActualFormat() const;
+    GLsizei getSamples() const;
     GLuint getRedSize() const;
     GLuint getGreenSize() const;
     GLuint getBlueSize() const;
@@ -59,75 +56,14 @@ class RenderbufferInterface
     GLuint getDepthSize() const;
     GLuint getStencilSize() const;
 
-    virtual unsigned int getSerial() const = 0;
-    virtual unsigned int getTextureSerial() const = 0;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(RenderbufferInterface);
-};
-
-class RenderbufferTexture2D : public RenderbufferInterface
-{
-  public:
-    RenderbufferTexture2D(Texture2D *texture, GLenum target);
-
-    virtual ~RenderbufferTexture2D();
-
-    void addProxyRef(const Renderbuffer *proxy);
-    void releaseProxy(const Renderbuffer *proxy);
-
-    rx::RenderTarget *getRenderTarget();
-    rx::RenderTarget *getDepthStencil();
-
-    virtual GLsizei getWidth() const;
-    virtual GLsizei getHeight() const;
-    virtual GLenum getInternalFormat() const;
-    virtual GLenum getActualFormat() const;
-    virtual GLsizei getSamples() const;
-
-    virtual unsigned int getSerial() const;
-    virtual unsigned int getTextureSerial() const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(RenderbufferTexture2D);
-
-    BindingPointer <Texture2D> mTexture2D;
-    GLenum mTarget;
-};
-
-class RenderbufferTextureCubeMap : public RenderbufferInterface
-{
-  public:
-    RenderbufferTextureCubeMap(TextureCubeMap *texture, GLenum target);
-
-    virtual ~RenderbufferTextureCubeMap();
-
-    void addProxyRef(const Renderbuffer *proxy);
-    void releaseProxy(const Renderbuffer *proxy);
-
-    rx::RenderTarget *getRenderTarget();
-    rx::RenderTarget *getDepthStencil();
-
-    virtual GLsizei getWidth() const;
-    virtual GLsizei getHeight() const;
-    virtual GLenum getInternalFormat() const;
-    virtual GLenum getActualFormat() const;
-    virtual GLsizei getSamples() const;
-
-    virtual unsigned int getSerial() const;
-    virtual unsigned int getTextureSerial() const;
-
   private:
-    DISALLOW_COPY_AND_ASSIGN(RenderbufferTextureCubeMap);
-
-    BindingPointer <TextureCubeMap> mTextureCubeMap;
-    GLenum mTarget;
+    RenderbufferStorage *mStorage;
 };
 
 // A class derived from RenderbufferStorage is created whenever glRenderbufferStorage
 // is called. The specific concrete type depends on whether the internal format is
 // colour depth, stencil or packed depth/stencil.
-class RenderbufferStorage : public RenderbufferInterface
+class RenderbufferStorage
 {
   public:
     RenderbufferStorage();
@@ -135,7 +71,6 @@ class RenderbufferStorage : public RenderbufferInterface
     virtual ~RenderbufferStorage() = 0;
 
     virtual rx::RenderTarget *getRenderTarget();
-    virtual rx::RenderTarget *getDepthStencil();
 
     virtual GLsizei getWidth() const;
     virtual GLsizei getHeight() const;
@@ -144,10 +79,11 @@ class RenderbufferStorage : public RenderbufferInterface
     virtual GLsizei getSamples() const;
 
     virtual unsigned int getSerial() const;
-    virtual unsigned int getTextureSerial() const { return 0; }
 
-    static unsigned int issueSerial();
-    static unsigned int issueCubeSerials();
+    virtual bool isTexture() const;
+    virtual unsigned int getTextureSerial() const;
+
+    static unsigned int issueSerials(unsigned int count);
 
   protected:
     GLsizei mWidth;
@@ -164,49 +100,6 @@ class RenderbufferStorage : public RenderbufferInterface
     static unsigned int mCurrentSerial;
 };
 
-// Renderbuffer implements the GL renderbuffer object.
-// It's only a proxy for a RenderbufferInterface instance; the internal object
-// can change whenever glRenderbufferStorage is called.
-class Renderbuffer : public RefCountObject
-{
-  public:
-    Renderbuffer(rx::Renderer *renderer, GLuint id, RenderbufferInterface *storage);
-
-    virtual ~Renderbuffer();
-
-    // These functions from RefCountObject are overloaded here because
-    // Textures need to maintain their own count of references to them via
-    // Renderbuffers/RenderbufferTextures. These functions invoke those
-    // reference counting functions on the RenderbufferInterface.
-    void addRef() const;
-    void release() const;
-
-    rx::RenderTarget *getRenderTarget();
-    rx::RenderTarget *getDepthStencil();
-
-    GLsizei getWidth() const;
-    GLsizei getHeight() const;
-    GLenum getInternalFormat() const;
-    GLenum getActualFormat() const;
-    GLuint getRedSize() const;
-    GLuint getGreenSize() const;
-    GLuint getBlueSize() const;
-    GLuint getAlphaSize() const;
-    GLuint getDepthSize() const;
-    GLuint getStencilSize() const;
-    GLsizei getSamples() const;
-
-    unsigned int getSerial() const;
-    unsigned int getTextureSerial() const;
-
-    void setStorage(RenderbufferStorage *newStorage);
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(Renderbuffer);
-
-    RenderbufferInterface *mInstance;
-};
-
 class Colorbuffer : public RenderbufferStorage
 {
   public:
@@ -231,7 +124,7 @@ class DepthStencilbuffer : public RenderbufferStorage
 
     ~DepthStencilbuffer();
 
-    virtual rx::RenderTarget *getDepthStencil();
+    virtual rx::RenderTarget *getRenderTarget();
 
   protected:
     rx::RenderTarget  *mDepthStencil;
@@ -261,6 +154,7 @@ class Stencilbuffer : public DepthStencilbuffer
   private:
     DISALLOW_COPY_AND_ASSIGN(Stencilbuffer);
 };
+
 }
 
 #endif   // LIBGLESV2_RENDERBUFFER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/ResourceManager.cpp b/src/3rdparty/angle/src/libGLESv2/ResourceManager.cpp
index 58dd44fd95..9121de1750 100644
--- a/src/3rdparty/angle/src/libGLESv2/ResourceManager.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/ResourceManager.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -15,6 +14,9 @@
 #include "libGLESv2/Renderbuffer.h"
 #include "libGLESv2/Shader.h"
 #include "libGLESv2/Texture.h"
+#include "libGLESv2/Sampler.h"
+#include "libGLESv2/Fence.h"
+#include "libGLESv2/renderer/Renderer.h"
 
 namespace gl
 {
@@ -50,6 +52,16 @@ ResourceManager::~ResourceManager()
     {
         deleteTexture(mTextureMap.begin()->first);
     }
+
+    while (!mSamplerMap.empty())
+    {
+        deleteSampler(mSamplerMap.begin()->first);
+    }
+
+    while (!mFenceSyncMap.empty())
+    {
+        deleteFenceSync(mFenceSyncMap.begin()->first);
+    }
 }
 
 void ResourceManager::addRef()
@@ -80,13 +92,9 @@ GLuint ResourceManager::createShader(GLenum type)
 {
     GLuint handle = mProgramShaderHandleAllocator.allocate();
 
-    if (type == GL_VERTEX_SHADER)
-    {
-        mShaderMap[handle] = new VertexShader(this, mRenderer, handle);
-    }
-    else if (type == GL_FRAGMENT_SHADER)
+    if (type == GL_VERTEX_SHADER || type == GL_FRAGMENT_SHADER)
     {
-        mShaderMap[handle] = new FragmentShader(this, mRenderer, handle);
+        mShaderMap[handle] = new Shader(this, mRenderer->createShader(type), type, handle);
     }
     else UNREACHABLE();
 
@@ -123,6 +131,28 @@ GLuint ResourceManager::createRenderbuffer()
     return handle;
 }
 
+// Returns an unused sampler name
+GLuint ResourceManager::createSampler()
+{
+    GLuint handle = mSamplerHandleAllocator.allocate();
+
+    mSamplerMap[handle] = NULL;
+
+    return handle;
+}
+
+// Returns the next unused fence name, and allocates the fence
+GLuint ResourceManager::createFenceSync()
+{
+    GLuint handle = mFenceSyncHandleAllocator.allocate();
+
+    FenceSync *fenceSync = new FenceSync(mRenderer, handle);
+    fenceSync->addRef();
+    mFenceSyncMap[handle] = fenceSync;
+
+    return handle;
+}
+
 void ResourceManager::deleteBuffer(GLuint buffer)
 {
     BufferMap::iterator bufferObject = mBufferMap.find(buffer);
@@ -197,6 +227,30 @@ void ResourceManager::deleteRenderbuffer(GLuint renderbuffer)
     }
 }
 
+void ResourceManager::deleteSampler(GLuint sampler)
+{
+    auto samplerObject = mSamplerMap.find(sampler);
+
+    if (samplerObject != mSamplerMap.end())
+    {
+        mSamplerHandleAllocator.release(samplerObject->first);
+        if (samplerObject->second) samplerObject->second->release();
+        mSamplerMap.erase(samplerObject);
+    }
+}
+
+void ResourceManager::deleteFenceSync(GLuint fenceSync)
+{
+    auto fenceObjectIt = mFenceSyncMap.find(fenceSync);
+
+    if (fenceObjectIt != mFenceSyncMap.end())
+    {
+        mFenceSyncHandleAllocator.release(fenceObjectIt->first);
+        if (fenceObjectIt->second) fenceObjectIt->second->release();
+        mFenceSyncMap.erase(fenceObjectIt);
+    }
+}
+
 Buffer *ResourceManager::getBuffer(unsigned int handle)
 {
     BufferMap::iterator buffer = mBufferMap.find(handle);
@@ -269,6 +323,34 @@ Renderbuffer *ResourceManager::getRenderbuffer(unsigned int handle)
     }
 }
 
+Sampler *ResourceManager::getSampler(unsigned int handle)
+{
+    auto sampler = mSamplerMap.find(handle);
+
+    if (sampler == mSamplerMap.end())
+    {
+        return NULL;
+    }
+    else
+    {
+        return sampler->second;
+    }
+}
+
+FenceSync *ResourceManager::getFenceSync(unsigned int handle)
+{
+    auto fenceObjectIt = mFenceSyncMap.find(handle);
+
+    if (fenceObjectIt == mFenceSyncMap.end())
+    {
+        return NULL;
+    }
+    else
+    {
+        return fenceObjectIt->second;
+    }
+}
+
 void ResourceManager::setRenderbuffer(GLuint handle, Renderbuffer *buffer)
 {
     mRenderbufferMap[handle] = buffer;
@@ -278,25 +360,33 @@ void ResourceManager::checkBufferAllocation(unsigned int buffer)
 {
     if (buffer != 0 && !getBuffer(buffer))
     {
-        Buffer *bufferObject = new Buffer(mRenderer, buffer);
+        Buffer *bufferObject = new Buffer(mRenderer->createBuffer(), buffer);
         mBufferMap[buffer] = bufferObject;
         bufferObject->addRef();
     }
 }
 
-void ResourceManager::checkTextureAllocation(GLuint texture, TextureType type)
+void ResourceManager::checkTextureAllocation(GLuint texture, GLenum type)
 {
     if (!getTexture(texture) && texture != 0)
     {
         Texture *textureObject;
 
-        if (type == TEXTURE_2D)
+        if (type == GL_TEXTURE_2D)
+        {
+            textureObject = new Texture2D(mRenderer->createTexture(GL_TEXTURE_2D), texture);
+        }
+        else if (type == GL_TEXTURE_CUBE_MAP)
+        {
+            textureObject = new TextureCubeMap(mRenderer->createTexture(GL_TEXTURE_CUBE_MAP), texture);
+        }
+        else if (type == GL_TEXTURE_3D)
         {
-            textureObject = new Texture2D(mRenderer, texture);
+            textureObject = new Texture3D(mRenderer->createTexture(GL_TEXTURE_3D), texture);
         }
-        else if (type == TEXTURE_CUBE)
+        else if (type == GL_TEXTURE_2D_ARRAY)
         {
-            textureObject = new TextureCubeMap(mRenderer, texture);
+            textureObject = new Texture2DArray(mRenderer->createTexture(GL_TEXTURE_2D_ARRAY), texture);
         }
         else
         {
@@ -313,10 +403,25 @@ void ResourceManager::checkRenderbufferAllocation(GLuint renderbuffer)
 {
     if (renderbuffer != 0 && !getRenderbuffer(renderbuffer))
     {
-        Renderbuffer *renderbufferObject = new Renderbuffer(mRenderer, renderbuffer, new Colorbuffer(mRenderer, 0, 0, GL_RGBA4, 0));
+        Renderbuffer *renderbufferObject = new Renderbuffer(renderbuffer, new Colorbuffer(mRenderer, 0, 0, GL_RGBA4, 0));
         mRenderbufferMap[renderbuffer] = renderbufferObject;
         renderbufferObject->addRef();
     }
 }
 
+void ResourceManager::checkSamplerAllocation(GLuint sampler)
+{
+    if (sampler != 0 && !getSampler(sampler))
+    {
+        Sampler *samplerObject = new Sampler(sampler);
+        mSamplerMap[sampler] = samplerObject;
+        samplerObject->addRef();
+    }
+}
+
+bool ResourceManager::isSampler(GLuint sampler)
+{
+    return mSamplerMap.find(sampler) != mSamplerMap.end();
+}
+
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/ResourceManager.h b/src/3rdparty/angle/src/libGLESv2/ResourceManager.h
index e99c77c35d..7d53bd4854 100644
--- a/src/3rdparty/angle/src/libGLESv2/ResourceManager.h
+++ b/src/3rdparty/angle/src/libGLESv2/ResourceManager.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,19 +10,14 @@
 #ifndef LIBGLESV2_RESOURCEMANAGER_H_
 #define LIBGLESV2_RESOURCEMANAGER_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
-
-#ifdef _MSC_VER
-#include <hash_map>
-#else
-#include <unordered_map>
-#endif
-
 #include "common/angleutils.h"
 #include "libGLESv2/angletypes.h"
 #include "libGLESv2/HandleAllocator.h"
 
+#include "angle_gl.h"
+
+#include <unordered_map>
+
 namespace rx
 {
 class Renderer;
@@ -35,6 +30,8 @@ class Shader;
 class Program;
 class Texture;
 class Renderbuffer;
+class Sampler;
+class FenceSync;
 
 class ResourceManager
 {
@@ -50,24 +47,33 @@ class ResourceManager
     GLuint createProgram();
     GLuint createTexture();
     GLuint createRenderbuffer();
+    GLuint createSampler();
+    GLuint createFenceSync();
 
     void deleteBuffer(GLuint buffer);
     void deleteShader(GLuint shader);
     void deleteProgram(GLuint program);
     void deleteTexture(GLuint texture);
     void deleteRenderbuffer(GLuint renderbuffer);
+    void deleteSampler(GLuint sampler);
+    void deleteFenceSync(GLuint fenceSync);
 
     Buffer *getBuffer(GLuint handle);
     Shader *getShader(GLuint handle);
     Program *getProgram(GLuint handle);
     Texture *getTexture(GLuint handle);
     Renderbuffer *getRenderbuffer(GLuint handle);
-    
+    Sampler *getSampler(GLuint handle);
+    FenceSync *getFenceSync(GLuint handle);
+
     void setRenderbuffer(GLuint handle, Renderbuffer *renderbuffer);
 
     void checkBufferAllocation(unsigned int buffer);
-    void checkTextureAllocation(GLuint texture, TextureType type);
+    void checkTextureAllocation(GLuint texture, GLenum type);
     void checkRenderbufferAllocation(GLuint renderbuffer);
+    void checkSamplerAllocation(GLuint sampler);
+
+    bool isSampler(GLuint sampler);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(ResourceManager);
@@ -75,32 +81,32 @@ class ResourceManager
     std::size_t mRefCount;
     rx::Renderer *mRenderer;
 
-#ifndef HASH_MAP
-# ifdef _MSC_VER
-#  define HASH_MAP stdext::hash_map
-# else
-#  define HASH_MAP std::unordered_map
-# endif
-#endif
-
-    typedef HASH_MAP<GLuint, Buffer*> BufferMap;
+    typedef std::unordered_map<GLuint, Buffer*> BufferMap;
     BufferMap mBufferMap;
     HandleAllocator mBufferHandleAllocator;
 
-    typedef HASH_MAP<GLuint, Shader*> ShaderMap;
+    typedef std::unordered_map<GLuint, Shader*> ShaderMap;
     ShaderMap mShaderMap;
 
-    typedef HASH_MAP<GLuint, Program*> ProgramMap;
+    typedef std::unordered_map<GLuint, Program*> ProgramMap;
     ProgramMap mProgramMap;
     HandleAllocator mProgramShaderHandleAllocator;
 
-    typedef HASH_MAP<GLuint, Texture*> TextureMap;
+    typedef std::unordered_map<GLuint, Texture*> TextureMap;
     TextureMap mTextureMap;
     HandleAllocator mTextureHandleAllocator;
 
-    typedef HASH_MAP<GLuint, Renderbuffer*> RenderbufferMap;
+    typedef std::unordered_map<GLuint, Renderbuffer*> RenderbufferMap;
     RenderbufferMap mRenderbufferMap;
     HandleAllocator mRenderbufferHandleAllocator;
+
+    typedef std::unordered_map<GLuint, Sampler*> SamplerMap;
+    SamplerMap mSamplerMap;
+    HandleAllocator mSamplerHandleAllocator;
+
+    typedef std::unordered_map<GLuint, FenceSync*> FenceMap;
+    FenceMap mFenceSyncMap;
+    HandleAllocator mFenceSyncHandleAllocator;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Sampler.cpp b/src/3rdparty/angle/src/libGLESv2/Sampler.cpp
new file mode 100644
index 0000000000..b906e65557
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/Sampler.cpp
@@ -0,0 +1,43 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Sampler.cpp : Implements the Sampler class, which represents a GLES 3
+// sampler object. Sampler objects store some state needed to sample textures.
+
+#include "libGLESv2/Sampler.h"
+#include "libGLESv2/angletypes.h"
+
+namespace gl
+{
+
+Sampler::Sampler(GLuint id)
+    : RefCountObject(id),
+      mMinFilter(GL_NEAREST_MIPMAP_LINEAR),
+      mMagFilter(GL_LINEAR),
+      mWrapS(GL_REPEAT),
+      mWrapT(GL_REPEAT),
+      mWrapR(GL_REPEAT),
+      mMinLod(-1000.0f),
+      mMaxLod(1000.0f),
+      mComparisonMode(GL_NONE),
+      mComparisonFunc(GL_LEQUAL)
+{
+}
+
+void Sampler::getState(SamplerState *samplerState) const
+{
+    samplerState->minFilter   = mMinFilter;
+    samplerState->magFilter   = mMagFilter;
+    samplerState->wrapS       = mWrapS;
+    samplerState->wrapT       = mWrapT;
+    samplerState->wrapR       = mWrapR;
+    samplerState->minLod      = mMinLod;
+    samplerState->maxLod      = mMaxLod;
+    samplerState->compareMode = mComparisonMode;
+    samplerState->compareFunc = mComparisonFunc;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/Sampler.h b/src/3rdparty/angle/src/libGLESv2/Sampler.h
new file mode 100644
index 0000000000..257bc25d22
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/Sampler.h
@@ -0,0 +1,60 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Sampler.h : Defines the Sampler class, which represents a GLES 3
+// sampler object. Sampler objects store some state needed to sample textures.
+
+#ifndef LIBGLESV2_SAMPLER_H_
+#define LIBGLESV2_SAMPLER_H_
+
+#include "common/RefCountObject.h"
+
+namespace gl
+{
+struct SamplerState;
+
+class Sampler : public RefCountObject
+{
+  public:
+    Sampler(GLuint id);
+
+    void setMinFilter(GLenum minFilter) { mMinFilter = minFilter; }
+    void setMagFilter(GLenum magFilter) { mMagFilter = magFilter; }
+    void setWrapS(GLenum wrapS) { mWrapS = wrapS; }
+    void setWrapT(GLenum wrapT) { mWrapT = wrapT; }
+    void setWrapR(GLenum wrapR) { mWrapR = wrapR; }
+    void setMinLod(GLfloat minLod) { mMinLod = minLod; }
+    void setMaxLod(GLfloat maxLod) { mMaxLod = maxLod; }
+    void setComparisonMode(GLenum comparisonMode) { mComparisonMode = comparisonMode; }
+    void setComparisonFunc(GLenum comparisonFunc) { mComparisonFunc = comparisonFunc; }
+
+    GLenum getMinFilter() const { return mMinFilter; }
+    GLenum getMagFilter() const { return mMagFilter; }
+    GLenum getWrapS() const { return mWrapS; }
+    GLenum getWrapT() const { return mWrapT; }
+    GLenum getWrapR() const { return mWrapR; }
+    GLfloat getMinLod() const { return mMinLod; }
+    GLfloat getMaxLod() const { return mMaxLod; }
+    GLenum getComparisonMode() const { return mComparisonMode; }
+    GLenum getComparisonFunc() const { return mComparisonFunc; }
+
+    void getState(SamplerState *samplerState) const;
+
+  private:
+    GLenum mMinFilter;
+    GLenum mMagFilter;
+    GLenum mWrapS;
+    GLenum mWrapT;
+    GLenum mWrapR;
+    GLfloat mMinLod;
+    GLfloat mMaxLod;
+    GLenum mComparisonMode;
+    GLenum mComparisonFunc;
+};
+
+}
+
+#endif // LIBGLESV2_SAMPLER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/Shader.cpp b/src/3rdparty/angle/src/libGLESv2/Shader.cpp
index f6a2f03dfc..e3da2b1a9e 100644
--- a/src/3rdparty/angle/src/libGLESv2/Shader.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Shader.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,37 +9,34 @@
 // functionality. [OpenGL ES 2.0.24] section 2.10 page 24 and section 3.8 page 84.
 
 #include "libGLESv2/Shader.h"
-
-#include "GLSLANG/ShaderLang.h"
-#include "libGLESv2/utilities.h"
 #include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/ShaderImpl.h"
 #include "libGLESv2/Constants.h"
 #include "libGLESv2/ResourceManager.h"
 
+#include "common/utilities.h"
+
+#include "GLSLANG/ShaderLang.h"
+
+#include <sstream>
+
 namespace gl
 {
-void *Shader::mFragmentCompiler = NULL;
-void *Shader::mVertexCompiler = NULL;
 
-Shader::Shader(ResourceManager *manager, const rx::Renderer *renderer, GLuint handle)
-    : mHandle(handle), mRenderer(renderer), mResourceManager(manager)
+Shader::Shader(ResourceManager *manager, rx::ShaderImpl *impl, GLenum type, GLuint handle)
+    : mShader(impl),
+      mType(type),
+      mHandle(handle),
+      mResourceManager(manager),
+      mRefCount(0),
+      mDeleteStatus(false),
+      mCompiled(false)
 {
-    mSource = NULL;
-    mHlsl = NULL;
-    mInfoLog = NULL;
-
-    uncompile();
-    initializeCompiler();
-
-    mRefCount = 0;
-    mDeleteStatus = false;
+    ASSERT(impl);
 }
 
 Shader::~Shader()
 {
-    delete[] mSource;
-    delete[] mHlsl;
-    delete[] mInfoLog;
 }
 
 GLuint Shader::getHandle() const
@@ -48,69 +44,31 @@ GLuint Shader::getHandle() const
     return mHandle;
 }
 
-void Shader::setSource(GLsizei count, const char **string, const GLint *length)
+void Shader::setSource(GLsizei count, const char *const *string, const GLint *length)
 {
-    delete[] mSource;
-    int totalLength = 0;
+    std::ostringstream stream;
 
     for (int i = 0; i < count; i++)
     {
-        if (length && length[i] >= 0)
-        {
-            totalLength += length[i];
-        }
-        else
-        {
-            totalLength += (int)strlen(string[i]);
-        }
+        stream << string[i];
     }
 
-    mSource = new char[totalLength + 1];
-    char *code = mSource;
-
-    for (int i = 0; i < count; i++)
-    {
-        int stringLength;
-
-        if (length && length[i] >= 0)
-        {
-            stringLength = length[i];
-        }
-        else
-        {
-            stringLength = (int)strlen(string[i]);
-        }
-
-        strncpy(code, string[i], stringLength);
-        code += stringLength;
-    }
-
-    mSource[totalLength] = '\0';
+    mSource = stream.str();
 }
 
 int Shader::getInfoLogLength() const
 {
-    if (!mInfoLog)
-    {
-        return 0;
-    }
-    else
-    {
-       return strlen(mInfoLog) + 1;
-    }
+    return  mShader->getInfoLog().empty() ? 0 : (mShader->getInfoLog().length() + 1);
 }
 
-void Shader::getInfoLog(GLsizei bufSize, GLsizei *length, char *infoLog)
+void Shader::getInfoLog(GLsizei bufSize, GLsizei *length, char *infoLog) const
 {
     int index = 0;
 
     if (bufSize > 0)
     {
-        if (mInfoLog)
-        {
-            index = std::min(bufSize - 1, (int)strlen(mInfoLog));
-            memcpy(infoLog, mInfoLog, index);
-        }
+        index = std::min(bufSize - 1, static_cast<GLsizei>(mShader->getInfoLog().length()));
+        memcpy(infoLog, mShader->getInfoLog().c_str(), index);
 
         infoLog[index] = '\0';
     }
@@ -123,39 +81,22 @@ void Shader::getInfoLog(GLsizei bufSize, GLsizei *length, char *infoLog)
 
 int Shader::getSourceLength() const
 {
-    if (!mSource)
-    {
-        return 0;
-    }
-    else
-    {
-       return strlen(mSource) + 1;
-    }
+    return mSource.empty() ? 0 : (mSource.length() + 1);
 }
 
 int Shader::getTranslatedSourceLength() const
 {
-    if (!mHlsl)
-    {
-        return 0;
-    }
-    else
-    {
-       return strlen(mHlsl) + 1;
-    }
+    return mShader->getTranslatedSource().empty() ? 0 : (mShader->getTranslatedSource().length() + 1);
 }
 
-void Shader::getSourceImpl(char *source, GLsizei bufSize, GLsizei *length, char *buffer)
+void Shader::getSourceImpl(const std::string &source, GLsizei bufSize, GLsizei *length, char *buffer)
 {
     int index = 0;
 
     if (bufSize > 0)
     {
-        if (source)
-        {
-            index = std::min(bufSize - 1, (int)strlen(source));
-            memcpy(buffer, source, index);
-        }
+        index = std::min(bufSize - 1, static_cast<GLsizei>(source.length()));
+        memcpy(buffer, source.c_str(), index);
 
         buffer[index] = '\0';
     }
@@ -166,29 +107,19 @@ void Shader::getSourceImpl(char *source, GLsizei bufSize, GLsizei *length, char
     }
 }
 
-void Shader::getSource(GLsizei bufSize, GLsizei *length, char *buffer)
+void Shader::getSource(GLsizei bufSize, GLsizei *length, char *buffer) const
 {
     getSourceImpl(mSource, bufSize, length, buffer);
 }
 
-void Shader::getTranslatedSource(GLsizei bufSize, GLsizei *length, char *buffer)
+void Shader::getTranslatedSource(GLsizei bufSize, GLsizei *length, char *buffer) const
 {
-    getSourceImpl(mHlsl, bufSize, length, buffer);
+    getSourceImpl(mShader->getTranslatedSource(), bufSize, length, buffer);
 }
 
-const sh::ActiveUniforms &Shader::getUniforms()
+void Shader::compile()
 {
-    return mActiveUniforms;
-}
-
-bool Shader::isCompiled()
-{
-    return mHlsl != NULL;
-}
-
-const char *Shader::getHLSL()
-{
-    return mHlsl;
+    mCompiled = mShader->compile(mSource);
 }
 
 void Shader::addRef()
@@ -221,404 +152,54 @@ void Shader::flagForDeletion()
     mDeleteStatus = true;
 }
 
-// Perform a one-time initialization of the shader compiler (or after being destructed by releaseCompiler)
-void Shader::initializeCompiler()
+const std::vector<gl::PackedVarying> &Shader::getVaryings() const
 {
-    if (!mFragmentCompiler)
-    {
-        int result = ShInitialize();
-
-        if (result)
-        {
-            ShShaderOutput hlslVersion = (mRenderer->getMajorShaderModel() >= 4) ? SH_HLSL11_OUTPUT : SH_HLSL9_OUTPUT;
-
-            ShBuiltInResources resources;
-            ShInitBuiltInResources(&resources);
-
-            resources.MaxVertexAttribs = MAX_VERTEX_ATTRIBS;
-            resources.MaxVertexUniformVectors = mRenderer->getMaxVertexUniformVectors();
-            resources.MaxVaryingVectors = mRenderer->getMaxVaryingVectors();
-            resources.MaxVertexTextureImageUnits = mRenderer->getMaxVertexTextureImageUnits();
-            resources.MaxCombinedTextureImageUnits = mRenderer->getMaxCombinedTextureImageUnits();
-            resources.MaxTextureImageUnits = MAX_TEXTURE_IMAGE_UNITS;
-            resources.MaxFragmentUniformVectors = mRenderer->getMaxFragmentUniformVectors();
-            resources.MaxDrawBuffers = mRenderer->getMaxRenderTargets();
-            resources.OES_standard_derivatives = mRenderer->getDerivativeInstructionSupport();
-            resources.EXT_draw_buffers = mRenderer->getMaxRenderTargets() > 1;
-            // resources.OES_EGL_image_external = mRenderer->getShareHandleSupport() ? 1 : 0; // TODO: commented out until the extension is actually supported.
-            resources.FragmentPrecisionHigh = 1;   // Shader Model 2+ always supports FP24 (s16e7) which corresponds to highp
-            resources.EXT_frag_depth = 1; // Shader Model 2+ always supports explicit depth output
-
-            mFragmentCompiler = ShConstructCompiler(SH_FRAGMENT_SHADER, SH_GLES2_SPEC, hlslVersion, &resources);
-            mVertexCompiler = ShConstructCompiler(SH_VERTEX_SHADER, SH_GLES2_SPEC, hlslVersion, &resources);
-        }
-    }
+    return mShader->getVaryings();
 }
 
-void Shader::releaseCompiler()
+const std::vector<sh::Uniform> &Shader::getUniforms() const
 {
-    ShDestruct(mFragmentCompiler);
-    ShDestruct(mVertexCompiler);
-
-    mFragmentCompiler = NULL;
-    mVertexCompiler = NULL;
-
-    ShFinalize();
+    return mShader->getUniforms();
 }
 
-void Shader::parseVaryings()
+const std::vector<sh::InterfaceBlock> &Shader::getInterfaceBlocks() const
 {
-    if (mHlsl)
-    {
-        const char *input = strstr(mHlsl, "// Varyings") + 12;
-
-        while(true)
-        {
-            char varyingType[256];
-            char varyingName[256];
-
-            int matches = sscanf(input, "static %255s %255s", varyingType, varyingName);
-
-            if (matches != 2)
-            {
-                break;
-            }
-
-            char *array = strstr(varyingName, "[");
-            int size = 1;
-
-            if (array)
-            {
-                size = atoi(array + 1);
-                *array = '\0';
-            }
-
-            mVaryings.push_back(Varying(parseType(varyingType), varyingName, size, array != NULL));
-
-            input = strstr(input, ";") + 2;
-        }
-
-        mUsesMultipleRenderTargets = strstr(mHlsl, "GL_USES_MRT") != NULL;
-        mUsesFragColor = strstr(mHlsl, "GL_USES_FRAG_COLOR") != NULL;
-        mUsesFragData = strstr(mHlsl, "GL_USES_FRAG_DATA") != NULL;
-        mUsesFragCoord = strstr(mHlsl, "GL_USES_FRAG_COORD") != NULL;
-        mUsesFrontFacing = strstr(mHlsl, "GL_USES_FRONT_FACING") != NULL;
-        mUsesPointSize = strstr(mHlsl, "GL_USES_POINT_SIZE") != NULL;
-        mUsesPointCoord = strstr(mHlsl, "GL_USES_POINT_COORD") != NULL;
-        mUsesDepthRange = strstr(mHlsl, "GL_USES_DEPTH_RANGE") != NULL;
-        mUsesFragDepth = strstr(mHlsl, "GL_USES_FRAG_DEPTH") != NULL;
-        mUsesDiscardRewriting = strstr(mHlsl, "ANGLE_USES_DISCARD_REWRITING") != NULL;
-    }
+    return mShader->getInterfaceBlocks();
 }
 
-void Shader::resetVaryingsRegisterAssignment()
+const std::vector<sh::Attribute> &Shader::getActiveAttributes() const
 {
-    for (VaryingList::iterator var = mVaryings.begin(); var != mVaryings.end(); var++)
-    {
-        var->reg = -1;
-        var->col = -1;
-    }
+    return mShader->getActiveAttributes();
 }
 
-// initialize/clean up previous state
-void Shader::uncompile()
+const std::vector<sh::Attribute> &Shader::getActiveOutputVariables() const
 {
-    // set by compileToHLSL
-    delete[] mHlsl;
-    mHlsl = NULL;
-    delete[] mInfoLog;
-    mInfoLog = NULL;
-
-    // set by parseVaryings
-    mVaryings.clear();
-
-    mUsesMultipleRenderTargets = false;
-    mUsesFragColor = false;
-    mUsesFragData = false;
-    mUsesFragCoord = false;
-    mUsesFrontFacing = false;
-    mUsesPointSize = false;
-    mUsesPointCoord = false;
-    mUsesDepthRange = false;
-    mUsesFragDepth = false;
-    mUsesDiscardRewriting = false;
-
-    mActiveUniforms.clear();
+    return mShader->getActiveOutputVariables();
 }
 
-void Shader::compileToHLSL(void *compiler)
+std::vector<gl::PackedVarying> &Shader::getVaryings()
 {
-    // ensure we don't pass a NULL source to the compiler
-    const char *source = "\0";
-    if (mSource)
-    {
-        source = mSource;
-    }
-
-    // ensure the compiler is loaded
-    initializeCompiler();
-
-    int compileOptions = SH_OBJECT_CODE;
-    std::string sourcePath;
-    if (perfActive())
-    {
-        sourcePath = getTempPath();
-        writeFile(sourcePath.c_str(), source, strlen(source));
-        compileOptions |= SH_LINE_DIRECTIVES;
-    }
-
-    int result;
-    if (sourcePath.empty())
-    {
-        result = ShCompile(compiler, &source, 1, compileOptions);
-    }
-    else
-    {
-        const char* sourceStrings[2] =
-        {
-            sourcePath.c_str(),
-            source
-        };
-
-        result = ShCompile(compiler, sourceStrings, 2, compileOptions | SH_SOURCE_PATH);
-    }
-
-    if (result)
-    {
-        size_t objCodeLen = 0;
-        ShGetInfo(compiler, SH_OBJECT_CODE_LENGTH, &objCodeLen);
-        mHlsl = new char[objCodeLen];
-        ShGetObjectCode(compiler, mHlsl);
-
-        void *activeUniforms;
-        ShGetInfoPointer(compiler, SH_ACTIVE_UNIFORMS_ARRAY, &activeUniforms);
-        mActiveUniforms = *(sh::ActiveUniforms*)activeUniforms;
-    }
-    else
-    {
-        size_t infoLogLen = 0;
-        ShGetInfo(compiler, SH_INFO_LOG_LENGTH, &infoLogLen);
-        mInfoLog = new char[infoLogLen];
-        ShGetInfoLog(compiler, mInfoLog);
-
-        TRACE("\n%s", mInfoLog);
-    }
+    return mShader->getVaryings();
 }
 
-GLenum Shader::parseType(const std::string &type)
+std::vector<sh::Uniform> &Shader::getUniforms()
 {
-    if (type == "float")
-    {
-        return GL_FLOAT;
-    }
-    else if (type == "float2")
-    {
-        return GL_FLOAT_VEC2;
-    }
-    else if (type == "float3")
-    {
-        return GL_FLOAT_VEC3;
-    }
-    else if (type == "float4")
-    {
-        return GL_FLOAT_VEC4;
-    }
-    else if (type == "float2x2")
-    {
-        return GL_FLOAT_MAT2;
-    }
-    else if (type == "float3x3")
-    {
-        return GL_FLOAT_MAT3;
-    }
-    else if (type == "float4x4")
-    {
-        return GL_FLOAT_MAT4;
-    }
-    else UNREACHABLE();
-
-    return GL_NONE;
-}
-
-// true if varying x has a higher priority in packing than y
-bool Shader::compareVarying(const Varying &x, const Varying &y)
-{
-    if(x.type == y.type)
-    {
-        return x.size > y.size;
-    }
-
-    switch (x.type)
-    {
-      case GL_FLOAT_MAT4: return true;
-      case GL_FLOAT_MAT2:
-        switch(y.type)
-        {
-          case GL_FLOAT_MAT4: return false;
-          case GL_FLOAT_MAT2: return true;
-          case GL_FLOAT_VEC4: return true;
-          case GL_FLOAT_MAT3: return true;
-          case GL_FLOAT_VEC3: return true;
-          case GL_FLOAT_VEC2: return true;
-          case GL_FLOAT:      return true;
-          default: UNREACHABLE();
-        }
-        break;
-      case GL_FLOAT_VEC4:
-        switch(y.type)
-        {
-          case GL_FLOAT_MAT4: return false;
-          case GL_FLOAT_MAT2: return false;
-          case GL_FLOAT_VEC4: return true;
-          case GL_FLOAT_MAT3: return true;
-          case GL_FLOAT_VEC3: return true;
-          case GL_FLOAT_VEC2: return true;
-          case GL_FLOAT:      return true;
-          default: UNREACHABLE();
-        }
-        break;
-      case GL_FLOAT_MAT3:
-        switch(y.type)
-        {
-          case GL_FLOAT_MAT4: return false;
-          case GL_FLOAT_MAT2: return false;
-          case GL_FLOAT_VEC4: return false;
-          case GL_FLOAT_MAT3: return true;
-          case GL_FLOAT_VEC3: return true;
-          case GL_FLOAT_VEC2: return true;
-          case GL_FLOAT:      return true;
-          default: UNREACHABLE();
-        }
-        break;
-      case GL_FLOAT_VEC3:
-        switch(y.type)
-        {
-          case GL_FLOAT_MAT4: return false;
-          case GL_FLOAT_MAT2: return false;
-          case GL_FLOAT_VEC4: return false;
-          case GL_FLOAT_MAT3: return false;
-          case GL_FLOAT_VEC3: return true;
-          case GL_FLOAT_VEC2: return true;
-          case GL_FLOAT:      return true;
-          default: UNREACHABLE();
-        }
-        break;
-      case GL_FLOAT_VEC2:
-        switch(y.type)
-        {
-          case GL_FLOAT_MAT4: return false;
-          case GL_FLOAT_MAT2: return false;
-          case GL_FLOAT_VEC4: return false;
-          case GL_FLOAT_MAT3: return false;
-          case GL_FLOAT_VEC3: return false;
-          case GL_FLOAT_VEC2: return true;
-          case GL_FLOAT:      return true;
-          default: UNREACHABLE();
-        }
-        break;
-      case GL_FLOAT: return false;
-      default: UNREACHABLE();
-    }
-
-    return false;
-}
-
-VertexShader::VertexShader(ResourceManager *manager, const rx::Renderer *renderer, GLuint handle)
-    : Shader(manager, renderer, handle)
-{
-}
-
-VertexShader::~VertexShader()
-{
-}
-
-GLenum VertexShader::getType()
-{
-    return GL_VERTEX_SHADER;
+    return mShader->getUniforms();
 }
 
-void VertexShader::uncompile()
+std::vector<sh::InterfaceBlock> &Shader::getInterfaceBlocks()
 {
-    Shader::uncompile();
-
-    // set by ParseAttributes
-    mAttributes.clear();
+    return mShader->getInterfaceBlocks();
 }
 
-void VertexShader::compile()
+std::vector<sh::Attribute> &Shader::getActiveAttributes()
 {
-    uncompile();
-
-    compileToHLSL(mVertexCompiler);
-    parseAttributes();
-    parseVaryings();
+    return mShader->getActiveAttributes();
 }
 
-int VertexShader::getSemanticIndex(const std::string &attributeName)
+std::vector<sh::Attribute> &Shader::getActiveOutputVariables()
 {
-    if (!attributeName.empty())
-    {
-        int semanticIndex = 0;
-        for (AttributeArray::iterator attribute = mAttributes.begin(); attribute != mAttributes.end(); attribute++)
-        {
-            if (attribute->name == attributeName)
-            {
-                return semanticIndex;
-            }
-
-            semanticIndex += VariableRowCount(attribute->type);
-        }
-    }
-
-    return -1;
+    return mShader->getActiveOutputVariables();
 }
 
-void VertexShader::parseAttributes()
-{
-    const char *hlsl = getHLSL();
-    if (hlsl)
-    {
-        const char *input = strstr(hlsl, "// Attributes") + 14;
-
-        while(true)
-        {
-            char attributeType[256];
-            char attributeName[256];
-
-            int matches = sscanf(input, "static %255s _%255s", attributeType, attributeName);
-
-            if (matches != 2)
-            {
-                break;
-            }
-
-            mAttributes.push_back(Attribute(parseType(attributeType), attributeName));
-
-            input = strstr(input, ";") + 2;
-        }
-    }
-}
-
-FragmentShader::FragmentShader(ResourceManager *manager, const rx::Renderer *renderer, GLuint handle)
-    : Shader(manager, renderer, handle)
-{
-}
-
-FragmentShader::~FragmentShader()
-{
-}
-
-GLenum FragmentShader::getType()
-{
-    return GL_FRAGMENT_SHADER;
-}
-
-void FragmentShader::compile()
-{
-    uncompile();
-
-    compileToHLSL(mFragmentCompiler);
-    parseVaryings();
-    mVaryings.sort(compareVarying);
-}
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Shader.h b/src/3rdparty/angle/src/libGLESv2/Shader.h
index 2015addd11..7ba3bd165c 100644
--- a/src/3rdparty/angle/src/libGLESv2/Shader.h
+++ b/src/3rdparty/angle/src/libGLESv2/Shader.h
@@ -12,68 +12,70 @@
 #ifndef LIBGLESV2_SHADER_H_
 #define LIBGLESV2_SHADER_H_
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
+
 #include <string>
 #include <list>
 #include <vector>
 
-#include "compiler/translator/Uniform.h"
+#include "angle_gl.h"
+#include <GLSLANG/ShaderLang.h>
+
 #include "common/angleutils.h"
+#include "libGLESv2/angletypes.h"
 
 namespace rx
 {
-class Renderer;
+class ShaderImpl;
 }
 
 namespace gl
 {
 class ResourceManager;
 
-struct Varying
+struct PackedVarying : public sh::Varying
 {
-    Varying(GLenum type, const std::string &name, int size, bool array)
-        : type(type), name(name), size(size), array(array), reg(-1), col(-1)
-    {
-    }
+    unsigned int registerIndex; // Assigned during link
+    unsigned int columnIndex; // Assigned during link, defaults to 0
 
-    GLenum type;
-    std::string name;
-    int size;   // Number of 'type' elements
-    bool array;
+    PackedVarying(const sh::Varying &varying)
+      : sh::Varying(varying),
+        registerIndex(GL_INVALID_INDEX),
+        columnIndex(0)
+    {}
 
-    int reg;    // First varying register, assigned during link
-    int col;    // First register element, assigned during link
-};
+    bool registerAssigned() const { return registerIndex != GL_INVALID_INDEX; }
+    bool isBuiltIn() const { return name.compare(0, 3, "gl_") == 0; }
 
-typedef std::list<Varying> VaryingList;
+    void resetRegisterAssignment()
+    {
+        registerIndex = GL_INVALID_INDEX;
+    }
+};
 
 class Shader
 {
-    friend class ProgramBinary;
-
   public:
-    Shader(ResourceManager *manager, const rx::Renderer *renderer, GLuint handle);
+    Shader(ResourceManager *manager, rx::ShaderImpl *impl, GLenum type, GLuint handle);
 
     virtual ~Shader();
 
-    virtual GLenum getType() = 0;
+    GLenum getType() const { return mType; }
     GLuint getHandle() const;
 
+    rx::ShaderImpl *getImplementation() { return mShader; }
+    const rx::ShaderImpl *getImplementation() const { return mShader; }
+
     void deleteSource();
-    void setSource(GLsizei count, const char **string, const GLint *length);
+    void setSource(GLsizei count, const char *const *string, const GLint *length);
     int getInfoLogLength() const;
-    void getInfoLog(GLsizei bufSize, GLsizei *length, char *infoLog);
+    void getInfoLog(GLsizei bufSize, GLsizei *length, char *infoLog) const;
     int getSourceLength() const;
-    void getSource(GLsizei bufSize, GLsizei *length, char *buffer);
+    void getSource(GLsizei bufSize, GLsizei *length, char *buffer) const;
     int getTranslatedSourceLength() const;
-    void getTranslatedSource(GLsizei bufSize, GLsizei *length, char *buffer);
-    const sh::ActiveUniforms &getUniforms();
+    void getTranslatedSource(GLsizei bufSize, GLsizei *length, char *buffer) const;
 
-    virtual void compile() = 0;
-    virtual void uncompile();
-    bool isCompiled();
-    const char *getHLSL();
+    void compile();
+    bool isCompiled() const { return mCompiled; }
 
     void addRef();
     void release();
@@ -81,105 +83,34 @@ class Shader
     bool isFlaggedForDeletion() const;
     void flagForDeletion();
 
-    static void releaseCompiler();
-
-  protected:
-    void parseVaryings();
-    void resetVaryingsRegisterAssignment();
-
-    void compileToHLSL(void *compiler);
+    const std::vector<gl::PackedVarying> &getVaryings() const;
+    const std::vector<sh::Uniform> &getUniforms() const;
+    const std::vector<sh::InterfaceBlock> &getInterfaceBlocks() const;
+    const std::vector<sh::Attribute> &getActiveAttributes() const;
+    const std::vector<sh::Attribute> &getActiveOutputVariables() const;
 
-    void getSourceImpl(char *source, GLsizei bufSize, GLsizei *length, char *buffer);
-
-    static GLenum parseType(const std::string &type);
-    static bool compareVarying(const Varying &x, const Varying &y);
-
-    const rx::Renderer *const mRenderer;
-
-    VaryingList mVaryings;
-
-    bool mUsesMultipleRenderTargets;
-    bool mUsesFragColor;
-    bool mUsesFragData;
-    bool mUsesFragCoord;
-    bool mUsesFrontFacing;
-    bool mUsesPointSize;
-    bool mUsesPointCoord;
-    bool mUsesDepthRange;
-    bool mUsesFragDepth;
-    bool mUsesDiscardRewriting;
-
-    static void *mFragmentCompiler;
-    static void *mVertexCompiler;
+    std::vector<gl::PackedVarying> &getVaryings();
+    std::vector<sh::Uniform> &getUniforms();
+    std::vector<sh::InterfaceBlock> &getInterfaceBlocks();
+    std::vector<sh::Attribute> &getActiveAttributes();
+    std::vector<sh::Attribute> &getActiveOutputVariables();
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Shader);
 
-    void initializeCompiler();
+    static void getSourceImpl(const std::string &source, GLsizei bufSize, GLsizei *length, char *buffer);
 
+    rx::ShaderImpl *mShader;
     const GLuint mHandle;
+    const GLenum mType;
+    std::string mSource;
     unsigned int mRefCount;     // Number of program objects this shader is attached to
     bool mDeleteStatus;         // Flag to indicate that the shader can be deleted when no longer in use
-
-    char *mSource;
-    char *mHlsl;
-    char *mInfoLog;
-    sh::ActiveUniforms mActiveUniforms;
+    bool mCompiled;             // Indicates if this shader has been successfully compiled
 
     ResourceManager *mResourceManager;
 };
 
-struct Attribute
-{
-    Attribute() : type(GL_NONE), name("")
-    {
-    }
-
-    Attribute(GLenum type, const std::string &name) : type(type), name(name)
-    {
-    }
-
-    GLenum type;
-    std::string name;
-};
-
-typedef std::vector<Attribute> AttributeArray;
-
-class VertexShader : public Shader
-{
-    friend class ProgramBinary;
-
-  public:
-    VertexShader(ResourceManager *manager, const rx::Renderer *renderer, GLuint handle);
-
-    ~VertexShader();
-
-    virtual GLenum getType();
-    virtual void compile();
-    virtual void uncompile();
-    int getSemanticIndex(const std::string &attributeName);
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(VertexShader);
-
-    void parseAttributes();
-
-    AttributeArray mAttributes;
-};
-
-class FragmentShader : public Shader
-{
-  public:
-    FragmentShader(ResourceManager *manager,const rx::Renderer *renderer, GLuint handle);
-
-    ~FragmentShader();
-
-    virtual GLenum getType();
-    virtual void compile();
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(FragmentShader);
-};
 }
 
 #endif   // LIBGLESV2_SHADER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/State.cpp b/src/3rdparty/angle/src/libGLESv2/State.cpp
new file mode 100644
index 0000000000..3c03b90e56
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/State.cpp
@@ -0,0 +1,1455 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// State.cpp: Implements the State class, encapsulating raw GL state.
+
+#include "libGLESv2/State.h"
+
+#include "libGLESv2/Context.h"
+#include "libGLESv2/Caps.h"
+#include "libGLESv2/VertexArray.h"
+#include "libGLESv2/Query.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+#include "libGLESv2/formatutils.h"
+
+namespace gl
+{
+
+State::State()
+{
+}
+
+State::~State()
+{
+    reset();
+}
+
+void State::initialize(const Caps& caps, GLuint clientVersion)
+{
+    mContext = NULL;
+
+    setClearColor(0.0f, 0.0f, 0.0f, 0.0f);
+
+    mDepthClearValue = 1.0f;
+    mStencilClearValue = 0;
+
+    mRasterizer.rasterizerDiscard = false;
+    mRasterizer.cullFace = false;
+    mRasterizer.cullMode = GL_BACK;
+    mRasterizer.frontFace = GL_CCW;
+    mRasterizer.polygonOffsetFill = false;
+    mRasterizer.polygonOffsetFactor = 0.0f;
+    mRasterizer.polygonOffsetUnits = 0.0f;
+    mRasterizer.pointDrawMode = false;
+    mRasterizer.multiSample = false;
+    mScissorTest = false;
+    mScissor.x = 0;
+    mScissor.y = 0;
+    mScissor.width = 0;
+    mScissor.height = 0;
+
+    mBlend.blend = false;
+    mBlend.sourceBlendRGB = GL_ONE;
+    mBlend.sourceBlendAlpha = GL_ONE;
+    mBlend.destBlendRGB = GL_ZERO;
+    mBlend.destBlendAlpha = GL_ZERO;
+    mBlend.blendEquationRGB = GL_FUNC_ADD;
+    mBlend.blendEquationAlpha = GL_FUNC_ADD;
+    mBlend.sampleAlphaToCoverage = false;
+    mBlend.dither = true;
+
+    mBlendColor.red = 0;
+    mBlendColor.green = 0;
+    mBlendColor.blue = 0;
+    mBlendColor.alpha = 0;
+
+    mDepthStencil.depthTest = false;
+    mDepthStencil.depthFunc = GL_LESS;
+    mDepthStencil.depthMask = true;
+    mDepthStencil.stencilTest = false;
+    mDepthStencil.stencilFunc = GL_ALWAYS;
+    mDepthStencil.stencilMask = -1;
+    mDepthStencil.stencilWritemask = -1;
+    mDepthStencil.stencilBackFunc = GL_ALWAYS;
+    mDepthStencil.stencilBackMask = -1;
+    mDepthStencil.stencilBackWritemask = -1;
+    mDepthStencil.stencilFail = GL_KEEP;
+    mDepthStencil.stencilPassDepthFail = GL_KEEP;
+    mDepthStencil.stencilPassDepthPass = GL_KEEP;
+    mDepthStencil.stencilBackFail = GL_KEEP;
+    mDepthStencil.stencilBackPassDepthFail = GL_KEEP;
+    mDepthStencil.stencilBackPassDepthPass = GL_KEEP;
+
+    mStencilRef = 0;
+    mStencilBackRef = 0;
+
+    mSampleCoverage = false;
+    mSampleCoverageValue = 1.0f;
+    mSampleCoverageInvert = false;
+    mGenerateMipmapHint = GL_DONT_CARE;
+    mFragmentShaderDerivativeHint = GL_DONT_CARE;
+
+    mLineWidth = 1.0f;
+
+    mViewport.x = 0;
+    mViewport.y = 0;
+    mViewport.width = 0;
+    mViewport.height = 0;
+    mNearZ = 0.0f;
+    mFarZ = 1.0f;
+
+    mBlend.colorMaskRed = true;
+    mBlend.colorMaskGreen = true;
+    mBlend.colorMaskBlue = true;
+    mBlend.colorMaskAlpha = true;
+
+    mActiveSampler = 0;
+
+    const GLfloat defaultFloatValues[] = { 0.0f, 0.0f, 0.0f, 1.0f };
+    for (int attribIndex = 0; attribIndex < MAX_VERTEX_ATTRIBS; attribIndex++)
+    {
+        mVertexAttribCurrentValues[attribIndex].setFloatValues(defaultFloatValues);
+    }
+
+    mSamplerTextures[GL_TEXTURE_2D].resize(caps.maxCombinedTextureImageUnits);
+    mSamplerTextures[GL_TEXTURE_CUBE_MAP].resize(caps.maxCombinedTextureImageUnits);
+    if (clientVersion >= 3)
+    {
+        // TODO: These could also be enabled via extension
+        mSamplerTextures[GL_TEXTURE_2D_ARRAY].resize(caps.maxCombinedTextureImageUnits);
+        mSamplerTextures[GL_TEXTURE_3D].resize(caps.maxCombinedTextureImageUnits);
+    }
+
+    mSamplers.resize(caps.maxCombinedTextureImageUnits);
+
+    mActiveQueries[GL_ANY_SAMPLES_PASSED].set(NULL);
+    mActiveQueries[GL_ANY_SAMPLES_PASSED_CONSERVATIVE].set(NULL);
+    mActiveQueries[GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN].set(NULL);
+
+    mCurrentProgramId = 0;
+    mCurrentProgramBinary.set(NULL);
+
+    mReadFramebuffer = NULL;
+    mDrawFramebuffer = NULL;
+}
+
+void State::reset()
+{
+    for (TextureBindingMap::iterator bindingVec = mSamplerTextures.begin(); bindingVec != mSamplerTextures.end(); bindingVec++)
+    {
+        TextureBindingVector &textureVector = bindingVec->second;
+        for (size_t textureIdx = 0; textureIdx < textureVector.size(); textureIdx++)
+        {
+            textureVector[textureIdx].set(NULL);
+        }
+    }
+    for (size_t samplerIdx = 0; samplerIdx < mSamplers.size(); samplerIdx++)
+    {
+        mSamplers[samplerIdx].set(NULL);
+    }
+
+    const GLfloat defaultFloatValues[] = { 0.0f, 0.0f, 0.0f, 1.0f };
+    for (int attribIndex = 0; attribIndex < MAX_VERTEX_ATTRIBS; attribIndex++)
+    {
+        mVertexAttribCurrentValues[attribIndex].setFloatValues(defaultFloatValues);
+    }
+
+    mArrayBuffer.set(NULL);
+    mRenderbuffer.set(NULL);
+
+    mTransformFeedback.set(NULL);
+
+    for (State::ActiveQueryMap::iterator i = mActiveQueries.begin(); i != mActiveQueries.end(); i++)
+    {
+        i->second.set(NULL);
+    }
+
+    mGenericUniformBuffer.set(NULL);
+    for (int i = 0; i < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS; i++)
+    {
+        mUniformBuffers[i].set(NULL);
+    }
+
+    mGenericTransformFeedbackBuffer.set(NULL);
+    for (int i = 0; i < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
+    {
+        mTransformFeedbackBuffers[i].set(NULL);
+    }
+
+    mCopyReadBuffer.set(NULL);
+    mCopyWriteBuffer.set(NULL);
+
+    mPack.pixelBuffer.set(NULL);
+    mUnpack.pixelBuffer.set(NULL);
+}
+
+const RasterizerState &State::getRasterizerState() const
+{
+    return mRasterizer;
+}
+
+const BlendState &State::getBlendState() const
+{
+    return mBlend;
+}
+
+const DepthStencilState &State::getDepthStencilState() const
+{
+    return mDepthStencil;
+}
+
+void State::setClearColor(float red, float green, float blue, float alpha)
+{
+    mColorClearValue.red = red;
+    mColorClearValue.green = green;
+    mColorClearValue.blue = blue;
+    mColorClearValue.alpha = alpha;
+}
+
+void State::setClearDepth(float depth)
+{
+    mDepthClearValue = depth;
+}
+
+void State::setClearStencil(int stencil)
+{
+    mStencilClearValue = stencil;
+}
+
+ClearParameters State::getClearParameters(GLbitfield mask) const
+{
+    ClearParameters clearParams = { 0 };
+    for (unsigned int i = 0; i < ArraySize(clearParams.clearColor); i++)
+    {
+        clearParams.clearColor[i] = false;
+    }
+    clearParams.colorFClearValue = mColorClearValue;
+    clearParams.colorClearType = GL_FLOAT;
+    clearParams.colorMaskRed = mBlend.colorMaskRed;
+    clearParams.colorMaskGreen = mBlend.colorMaskGreen;
+    clearParams.colorMaskBlue = mBlend.colorMaskBlue;
+    clearParams.colorMaskAlpha = mBlend.colorMaskAlpha;
+    clearParams.clearDepth = false;
+    clearParams.depthClearValue = mDepthClearValue;
+    clearParams.clearStencil = false;
+    clearParams.stencilClearValue = mStencilClearValue;
+    clearParams.stencilWriteMask = mDepthStencil.stencilWritemask;
+    clearParams.scissorEnabled = mScissorTest;
+    clearParams.scissor = mScissor;
+
+    const Framebuffer *framebufferObject = getDrawFramebuffer();
+    if (mask & GL_COLOR_BUFFER_BIT)
+    {
+        if (framebufferObject->hasEnabledColorAttachment())
+        {
+            for (unsigned int i = 0; i < ArraySize(clearParams.clearColor); i++)
+            {
+                clearParams.clearColor[i] = true;
+            }
+        }
+    }
+
+    if (mask & GL_DEPTH_BUFFER_BIT)
+    {
+        if (mDepthStencil.depthMask && framebufferObject->getDepthbuffer() != NULL)
+        {
+            clearParams.clearDepth = true;
+        }
+    }
+
+    if (mask & GL_STENCIL_BUFFER_BIT)
+    {
+        if (framebufferObject->getStencilbuffer() != NULL)
+        {
+            GLenum stencilActualFormat = framebufferObject->getStencilbuffer()->getActualFormat();
+            if (GetInternalFormatInfo(stencilActualFormat).stencilBits > 0)
+            {
+                clearParams.clearStencil = true;
+            }
+        }
+    }
+
+    return clearParams;
+}
+
+void State::setColorMask(bool red, bool green, bool blue, bool alpha)
+{
+    mBlend.colorMaskRed = red;
+    mBlend.colorMaskGreen = green;
+    mBlend.colorMaskBlue = blue;
+    mBlend.colorMaskAlpha = alpha;
+}
+
+void State::setDepthMask(bool mask)
+{
+    mDepthStencil.depthMask = mask;
+}
+
+bool State::isRasterizerDiscardEnabled() const
+{
+    return mRasterizer.rasterizerDiscard;
+}
+
+void State::setRasterizerDiscard(bool enabled)
+{
+    mRasterizer.rasterizerDiscard = enabled;
+}
+
+bool State::isCullFaceEnabled() const
+{
+    return mRasterizer.cullFace;
+}
+
+void State::setCullFace(bool enabled)
+{
+    mRasterizer.cullFace = enabled;
+}
+
+void State::setCullMode(GLenum mode)
+{
+    mRasterizer.cullMode = mode;
+}
+
+void State::setFrontFace(GLenum front)
+{
+    mRasterizer.frontFace = front;
+}
+
+bool State::isDepthTestEnabled() const
+{
+    return mDepthStencil.depthTest;
+}
+
+void State::setDepthTest(bool enabled)
+{
+    mDepthStencil.depthTest = enabled;
+}
+
+void State::setDepthFunc(GLenum depthFunc)
+{
+     mDepthStencil.depthFunc = depthFunc;
+}
+
+void State::setDepthRange(float zNear, float zFar)
+{
+    mNearZ = zNear;
+    mFarZ = zFar;
+}
+
+void State::getDepthRange(float *zNear, float *zFar) const
+{
+    *zNear = mNearZ;
+    *zFar = mFarZ;
+}
+
+bool State::isBlendEnabled() const
+{
+    return mBlend.blend;
+}
+
+void State::setBlend(bool enabled)
+{
+    mBlend.blend = enabled;
+}
+
+void State::setBlendFactors(GLenum sourceRGB, GLenum destRGB, GLenum sourceAlpha, GLenum destAlpha)
+{
+    mBlend.sourceBlendRGB = sourceRGB;
+    mBlend.destBlendRGB = destRGB;
+    mBlend.sourceBlendAlpha = sourceAlpha;
+    mBlend.destBlendAlpha = destAlpha;
+}
+
+void State::setBlendColor(float red, float green, float blue, float alpha)
+{
+    mBlendColor.red = red;
+    mBlendColor.green = green;
+    mBlendColor.blue = blue;
+    mBlendColor.alpha = alpha;
+}
+
+void State::setBlendEquation(GLenum rgbEquation, GLenum alphaEquation)
+{
+    mBlend.blendEquationRGB = rgbEquation;
+    mBlend.blendEquationAlpha = alphaEquation;
+}
+
+const ColorF &State::getBlendColor() const
+{
+    return mBlendColor;
+}
+
+bool State::isStencilTestEnabled() const
+{
+    return mDepthStencil.stencilTest;
+}
+
+void State::setStencilTest(bool enabled)
+{
+    mDepthStencil.stencilTest = enabled;
+}
+
+void State::setStencilParams(GLenum stencilFunc, GLint stencilRef, GLuint stencilMask)
+{
+    mDepthStencil.stencilFunc = stencilFunc;
+    mStencilRef = (stencilRef > 0) ? stencilRef : 0;
+    mDepthStencil.stencilMask = stencilMask;
+}
+
+void State::setStencilBackParams(GLenum stencilBackFunc, GLint stencilBackRef, GLuint stencilBackMask)
+{
+    mDepthStencil.stencilBackFunc = stencilBackFunc;
+    mStencilBackRef = (stencilBackRef > 0) ? stencilBackRef : 0;
+    mDepthStencil.stencilBackMask = stencilBackMask;
+}
+
+void State::setStencilWritemask(GLuint stencilWritemask)
+{
+    mDepthStencil.stencilWritemask = stencilWritemask;
+}
+
+void State::setStencilBackWritemask(GLuint stencilBackWritemask)
+{
+    mDepthStencil.stencilBackWritemask = stencilBackWritemask;
+}
+
+void State::setStencilOperations(GLenum stencilFail, GLenum stencilPassDepthFail, GLenum stencilPassDepthPass)
+{
+    mDepthStencil.stencilFail = stencilFail;
+    mDepthStencil.stencilPassDepthFail = stencilPassDepthFail;
+    mDepthStencil.stencilPassDepthPass = stencilPassDepthPass;
+}
+
+void State::setStencilBackOperations(GLenum stencilBackFail, GLenum stencilBackPassDepthFail, GLenum stencilBackPassDepthPass)
+{
+    mDepthStencil.stencilBackFail = stencilBackFail;
+    mDepthStencil.stencilBackPassDepthFail = stencilBackPassDepthFail;
+    mDepthStencil.stencilBackPassDepthPass = stencilBackPassDepthPass;
+}
+
+GLint State::getStencilRef() const
+{
+    return mStencilRef;
+}
+
+GLint State::getStencilBackRef() const
+{
+    return mStencilBackRef;
+}
+
+bool State::isPolygonOffsetFillEnabled() const
+{
+    return mRasterizer.polygonOffsetFill;
+}
+
+void State::setPolygonOffsetFill(bool enabled)
+{
+     mRasterizer.polygonOffsetFill = enabled;
+}
+
+void State::setPolygonOffsetParams(GLfloat factor, GLfloat units)
+{
+    // An application can pass NaN values here, so handle this gracefully
+    mRasterizer.polygonOffsetFactor = factor != factor ? 0.0f : factor;
+    mRasterizer.polygonOffsetUnits = units != units ? 0.0f : units;
+}
+
+bool State::isSampleAlphaToCoverageEnabled() const
+{
+    return mBlend.sampleAlphaToCoverage;
+}
+
+void State::setSampleAlphaToCoverage(bool enabled)
+{
+    mBlend.sampleAlphaToCoverage = enabled;
+}
+
+bool State::isSampleCoverageEnabled() const
+{
+    return mSampleCoverage;
+}
+
+void State::setSampleCoverage(bool enabled)
+{
+    mSampleCoverage = enabled;
+}
+
+void State::setSampleCoverageParams(GLclampf value, bool invert)
+{
+    mSampleCoverageValue = value;
+    mSampleCoverageInvert = invert;
+}
+
+void State::getSampleCoverageParams(GLclampf *value, bool *invert)
+{
+    ASSERT(value != NULL && invert != NULL);
+
+    *value = mSampleCoverageValue;
+    *invert = mSampleCoverageInvert;
+}
+
+bool State::isScissorTestEnabled() const
+{
+    return mScissorTest;
+}
+
+void State::setScissorTest(bool enabled)
+{
+    mScissorTest = enabled;
+}
+
+void State::setScissorParams(GLint x, GLint y, GLsizei width, GLsizei height)
+{
+    mScissor.x = x;
+    mScissor.y = y;
+    mScissor.width = width;
+    mScissor.height = height;
+}
+
+const Rectangle &State::getScissor() const
+{
+    return mScissor;
+}
+
+bool State::isDitherEnabled() const
+{
+    return mBlend.dither;
+}
+
+void State::setDither(bool enabled)
+{
+    mBlend.dither = enabled;
+}
+
+void State::setEnableFeature(GLenum feature, bool enabled)
+{
+    switch (feature)
+    {
+      case GL_CULL_FACE:                     setCullFace(enabled);              break;
+      case GL_POLYGON_OFFSET_FILL:           setPolygonOffsetFill(enabled);     break;
+      case GL_SAMPLE_ALPHA_TO_COVERAGE:      setSampleAlphaToCoverage(enabled); break;
+      case GL_SAMPLE_COVERAGE:               setSampleCoverage(enabled);        break;
+      case GL_SCISSOR_TEST:                  setScissorTest(enabled);           break;
+      case GL_STENCIL_TEST:                  setStencilTest(enabled);           break;
+      case GL_DEPTH_TEST:                    setDepthTest(enabled);             break;
+      case GL_BLEND:                         setBlend(enabled);                 break;
+      case GL_DITHER:                        setDither(enabled);                break;
+      case GL_PRIMITIVE_RESTART_FIXED_INDEX: UNIMPLEMENTED();                   break;
+      case GL_RASTERIZER_DISCARD:            setRasterizerDiscard(enabled);     break;
+      default:                               UNREACHABLE();
+    }
+}
+
+bool State::getEnableFeature(GLenum feature)
+{
+    switch (feature)
+    {
+      case GL_CULL_FACE:                     return isCullFaceEnabled();
+      case GL_POLYGON_OFFSET_FILL:           return isPolygonOffsetFillEnabled();
+      case GL_SAMPLE_ALPHA_TO_COVERAGE:      return isSampleAlphaToCoverageEnabled();
+      case GL_SAMPLE_COVERAGE:               return isSampleCoverageEnabled();
+      case GL_SCISSOR_TEST:                  return isScissorTestEnabled();
+      case GL_STENCIL_TEST:                  return isStencilTestEnabled();
+      case GL_DEPTH_TEST:                    return isDepthTestEnabled();
+      case GL_BLEND:                         return isBlendEnabled();
+      case GL_DITHER:                        return isDitherEnabled();
+      case GL_PRIMITIVE_RESTART_FIXED_INDEX: UNIMPLEMENTED(); return false;
+      case GL_RASTERIZER_DISCARD:            return isRasterizerDiscardEnabled();
+      default:                               UNREACHABLE(); return false;
+    }
+}
+
+void State::setLineWidth(GLfloat width)
+{
+    mLineWidth = width;
+}
+
+void State::setGenerateMipmapHint(GLenum hint)
+{
+    mGenerateMipmapHint = hint;
+}
+
+void State::setFragmentShaderDerivativeHint(GLenum hint)
+{
+    mFragmentShaderDerivativeHint = hint;
+    // TODO: Propagate the hint to shader translator so we can write
+    // ddx, ddx_coarse, or ddx_fine depending on the hint.
+    // Ignore for now. It is valid for implementations to ignore hint.
+}
+
+void State::setViewportParams(GLint x, GLint y, GLsizei width, GLsizei height)
+{
+    mViewport.x = x;
+    mViewport.y = y;
+    mViewport.width = width;
+    mViewport.height = height;
+}
+
+const Rectangle &State::getViewport() const
+{
+    return mViewport;
+}
+
+void State::setActiveSampler(unsigned int active)
+{
+    mActiveSampler = active;
+}
+
+unsigned int State::getActiveSampler() const
+{
+    return mActiveSampler;
+}
+
+void State::setSamplerTexture(GLenum type, Texture *texture)
+{
+    mSamplerTextures[type][mActiveSampler].set(texture);
+}
+
+Texture *State::getSamplerTexture(unsigned int sampler, GLenum type) const
+{
+    const BindingPointer<Texture>& binding = mSamplerTextures.at(type)[sampler];
+
+    if (binding.id() == 0)   // Special case: 0 refers to default textures held by Context
+    {
+        return NULL;
+    }
+
+    return binding.get();
+}
+
+GLuint State::getSamplerTextureId(unsigned int sampler, GLenum type) const
+{
+    return mSamplerTextures.at(type)[sampler].id();
+}
+
+void State::detachTexture(GLuint texture)
+{
+    // Textures have a detach method on State rather than a simple
+    // removeBinding, because the zero/null texture objects are managed
+    // separately, and don't have to go through the Context's maps or
+    // the ResourceManager.
+
+    // [OpenGL ES 2.0.24] section 3.8 page 84:
+    // If a texture object is deleted, it is as if all texture units which are bound to that texture object are
+    // rebound to texture object zero
+
+    for (TextureBindingMap::iterator bindingVec = mSamplerTextures.begin(); bindingVec != mSamplerTextures.end(); bindingVec++)
+    {
+        TextureBindingVector &textureVector = bindingVec->second;
+        for (size_t textureIdx = 0; textureIdx < textureVector.size(); textureIdx++)
+        {
+            BindingPointer<Texture> &binding = textureVector[textureIdx];
+            if (binding.id() == texture)
+            {
+                binding.set(NULL);
+            }
+        }
+    }
+
+    // [OpenGL ES 2.0.24] section 4.4 page 112:
+    // If a texture object is deleted while its image is attached to the currently bound framebuffer, then it is
+    // as if Texture2DAttachment had been called, with a texture of 0, for each attachment point to which this
+    // image was attached in the currently bound framebuffer.
+
+    if (mReadFramebuffer)
+    {
+        mReadFramebuffer->detachTexture(texture);
+    }
+
+    if (mDrawFramebuffer)
+    {
+        mDrawFramebuffer->detachTexture(texture);
+    }
+}
+
+void State::setSamplerBinding(GLuint textureUnit, Sampler *sampler)
+{
+    mSamplers[textureUnit].set(sampler);
+}
+
+GLuint State::getSamplerId(GLuint textureUnit) const
+{
+    ASSERT(textureUnit < mSamplers.size());
+    return mSamplers[textureUnit].id();
+}
+
+Sampler *State::getSampler(GLuint textureUnit) const
+{
+    return mSamplers[textureUnit].get();
+}
+
+void State::detachSampler(GLuint sampler)
+{
+    // [OpenGL ES 3.0.2] section 3.8.2 pages 123-124:
+    // If a sampler object that is currently bound to one or more texture units is
+    // deleted, it is as though BindSampler is called once for each texture unit to
+    // which the sampler is bound, with unit set to the texture unit and sampler set to zero.
+    for (size_t textureUnit = 0; textureUnit < mSamplers.size(); textureUnit++)
+    {
+        BindingPointer<Sampler> &samplerBinding = mSamplers[textureUnit];
+        if (samplerBinding.id() == sampler)
+        {
+            samplerBinding.set(NULL);
+        }
+    }
+}
+
+void State::setRenderbufferBinding(Renderbuffer *renderbuffer)
+{
+    mRenderbuffer.set(renderbuffer);
+}
+
+GLuint State::getRenderbufferId() const
+{
+    return mRenderbuffer.id();
+}
+
+Renderbuffer *State::getCurrentRenderbuffer()
+{
+    return mRenderbuffer.get();
+}
+
+void State::detachRenderbuffer(GLuint renderbuffer)
+{
+    // [OpenGL ES 2.0.24] section 4.4 page 109:
+    // If a renderbuffer that is currently bound to RENDERBUFFER is deleted, it is as though BindRenderbuffer
+    // had been executed with the target RENDERBUFFER and name of zero.
+
+    if (mRenderbuffer.id() == renderbuffer)
+    {
+        mRenderbuffer.set(NULL);
+    }
+
+    // [OpenGL ES 2.0.24] section 4.4 page 111:
+    // If a renderbuffer object is deleted while its image is attached to the currently bound framebuffer,
+    // then it is as if FramebufferRenderbuffer had been called, with a renderbuffer of 0, for each attachment
+    // point to which this image was attached in the currently bound framebuffer.
+
+    Framebuffer *readFramebuffer = mReadFramebuffer;
+    Framebuffer *drawFramebuffer = mDrawFramebuffer;
+
+    if (readFramebuffer)
+    {
+        readFramebuffer->detachRenderbuffer(renderbuffer);
+    }
+
+    if (drawFramebuffer && drawFramebuffer != readFramebuffer)
+    {
+        drawFramebuffer->detachRenderbuffer(renderbuffer);
+    }
+
+}
+
+void State::setReadFramebufferBinding(Framebuffer *framebuffer)
+{
+    mReadFramebuffer = framebuffer;
+}
+
+void State::setDrawFramebufferBinding(Framebuffer *framebuffer)
+{
+    mDrawFramebuffer = framebuffer;
+}
+
+Framebuffer *State::getTargetFramebuffer(GLenum target) const
+{
+    switch (target)
+    {
+    case GL_READ_FRAMEBUFFER_ANGLE:  return mReadFramebuffer;
+    case GL_DRAW_FRAMEBUFFER_ANGLE:
+    case GL_FRAMEBUFFER:             return mDrawFramebuffer;
+    default:                         UNREACHABLE(); return NULL;
+    }
+}
+
+Framebuffer *State::getReadFramebuffer()
+{
+    return mReadFramebuffer;
+}
+
+Framebuffer *State::getDrawFramebuffer()
+{
+    return mDrawFramebuffer;
+}
+
+const Framebuffer *State::getReadFramebuffer() const
+{
+    return mReadFramebuffer;
+}
+
+const Framebuffer *State::getDrawFramebuffer() const
+{
+    return mDrawFramebuffer;
+}
+
+bool State::removeReadFramebufferBinding(GLuint framebuffer)
+{
+    if (mReadFramebuffer->id() == framebuffer)
+    {
+        mReadFramebuffer = NULL;
+        return true;
+    }
+
+    return false;
+}
+
+bool State::removeDrawFramebufferBinding(GLuint framebuffer)
+{
+    if (mDrawFramebuffer->id() == framebuffer)
+    {
+        mDrawFramebuffer = NULL;
+        return true;
+    }
+
+    return false;
+}
+
+void State::setVertexArrayBinding(VertexArray *vertexArray)
+{
+    mVertexArray = vertexArray;
+}
+
+GLuint State::getVertexArrayId() const
+{
+    ASSERT(mVertexArray != NULL);
+    return mVertexArray->id();
+}
+
+VertexArray *State::getVertexArray() const
+{
+    ASSERT(mVertexArray != NULL);
+    return mVertexArray;
+}
+
+bool State::removeVertexArrayBinding(GLuint vertexArray)
+{
+    if (mVertexArray->id() == vertexArray)
+    {
+        mVertexArray = NULL;
+        return true;
+    }
+
+    return false;
+}
+
+void State::setCurrentProgram(GLuint programId, Program *newProgram)
+{
+    mCurrentProgramId = programId; // set new ID before trying to delete program binary; otherwise it will only be flagged for deletion
+    mCurrentProgramBinary.set(NULL);
+
+    if (newProgram)
+    {
+        newProgram->addRef();
+        mCurrentProgramBinary.set(newProgram->getProgramBinary());
+    }
+}
+
+void State::setCurrentProgramBinary(ProgramBinary *binary)
+{
+    mCurrentProgramBinary.set(binary);
+}
+
+GLuint State::getCurrentProgramId() const
+{
+    return mCurrentProgramId;
+}
+
+ProgramBinary *State::getCurrentProgramBinary() const
+{
+    return mCurrentProgramBinary.get();
+}
+
+void State::setTransformFeedbackBinding(TransformFeedback *transformFeedback)
+{
+    mTransformFeedback.set(transformFeedback);
+}
+
+TransformFeedback *State::getCurrentTransformFeedback() const
+{
+    return mTransformFeedback.get();
+}
+
+void State::detachTransformFeedback(GLuint transformFeedback)
+{
+    if (mTransformFeedback.id() == transformFeedback)
+    {
+        mTransformFeedback.set(NULL);
+    }
+}
+
+bool State::isQueryActive() const
+{
+    for (State::ActiveQueryMap::const_iterator i = mActiveQueries.begin();
+        i != mActiveQueries.end(); i++)
+    {
+        if (i->second.get() != NULL)
+        {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+void State::setActiveQuery(GLenum target, Query *query)
+{
+    mActiveQueries[target].set(query);
+}
+
+GLuint State::getActiveQueryId(GLenum target) const
+{
+    const Query *query = getActiveQuery(target);
+    return (query ? query->id() : 0u);
+}
+
+Query *State::getActiveQuery(GLenum target) const
+{
+    // All query types should already exist in the activeQueries map
+    ASSERT(mActiveQueries.find(target) != mActiveQueries.end());
+
+    return mActiveQueries.at(target).get();
+}
+
+void State::setArrayBufferBinding(Buffer *buffer)
+{
+    mArrayBuffer.set(buffer);
+}
+
+GLuint State::getArrayBufferId() const
+{
+    return mArrayBuffer.id();
+}
+
+bool State::removeArrayBufferBinding(GLuint buffer)
+{
+    if (mArrayBuffer.id() == buffer)
+    {
+        mArrayBuffer.set(NULL);
+        return true;
+    }
+
+    return false;
+}
+
+void State::setGenericUniformBufferBinding(Buffer *buffer)
+{
+    mGenericUniformBuffer.set(buffer);
+}
+
+void State::setIndexedUniformBufferBinding(GLuint index, Buffer *buffer, GLintptr offset, GLsizeiptr size)
+{
+    mUniformBuffers[index].set(buffer, offset, size);
+}
+
+GLuint State::getIndexedUniformBufferId(GLuint index) const
+{
+    ASSERT(index < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS);
+
+    return mUniformBuffers[index].id();
+}
+
+Buffer *State::getIndexedUniformBuffer(GLuint index) const
+{
+    ASSERT(index < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS);
+
+    return mUniformBuffers[index].get();
+}
+
+void State::setGenericTransformFeedbackBufferBinding(Buffer *buffer)
+{
+    mGenericTransformFeedbackBuffer.set(buffer);
+}
+
+void State::setIndexedTransformFeedbackBufferBinding(GLuint index, Buffer *buffer, GLintptr offset, GLsizeiptr size)
+{
+    mTransformFeedbackBuffers[index].set(buffer, offset, size);
+}
+
+GLuint State::getIndexedTransformFeedbackBufferId(GLuint index) const
+{
+    ASSERT(index < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS);
+
+    return mTransformFeedbackBuffers[index].id();
+}
+
+Buffer *State::getIndexedTransformFeedbackBuffer(GLuint index) const
+{
+    ASSERT(index < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS);
+
+    return mTransformFeedbackBuffers[index].get();
+}
+
+GLuint State::getIndexedTransformFeedbackBufferOffset(GLuint index) const
+{
+    ASSERT(index < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS);
+
+    return mTransformFeedbackBuffers[index].getOffset();
+}
+
+void State::setCopyReadBufferBinding(Buffer *buffer)
+{
+    mCopyReadBuffer.set(buffer);
+}
+
+void State::setCopyWriteBufferBinding(Buffer *buffer)
+{
+    mCopyWriteBuffer.set(buffer);
+}
+
+void State::setPixelPackBufferBinding(Buffer *buffer)
+{
+    mPack.pixelBuffer.set(buffer);
+}
+
+void State::setPixelUnpackBufferBinding(Buffer *buffer)
+{
+    mUnpack.pixelBuffer.set(buffer);
+}
+
+Buffer *State::getTargetBuffer(GLenum target) const
+{
+    switch (target)
+    {
+      case GL_ARRAY_BUFFER:              return mArrayBuffer.get();
+      case GL_COPY_READ_BUFFER:          return mCopyReadBuffer.get();
+      case GL_COPY_WRITE_BUFFER:         return mCopyWriteBuffer.get();
+      case GL_ELEMENT_ARRAY_BUFFER:      return getVertexArray()->getElementArrayBuffer();
+      case GL_PIXEL_PACK_BUFFER:         return mPack.pixelBuffer.get();
+      case GL_PIXEL_UNPACK_BUFFER:       return mUnpack.pixelBuffer.get();
+      case GL_TRANSFORM_FEEDBACK_BUFFER: return mGenericTransformFeedbackBuffer.get();
+      case GL_UNIFORM_BUFFER:            return mGenericUniformBuffer.get();
+      default: UNREACHABLE();            return NULL;
+    }
+}
+
+void State::setEnableVertexAttribArray(unsigned int attribNum, bool enabled)
+{
+    getVertexArray()->enableAttribute(attribNum, enabled);
+}
+
+void State::setVertexAttribf(GLuint index, const GLfloat values[4])
+{
+    ASSERT(index < gl::MAX_VERTEX_ATTRIBS);
+    mVertexAttribCurrentValues[index].setFloatValues(values);
+}
+
+void State::setVertexAttribu(GLuint index, const GLuint values[4])
+{
+    ASSERT(index < gl::MAX_VERTEX_ATTRIBS);
+    mVertexAttribCurrentValues[index].setUnsignedIntValues(values);
+}
+
+void State::setVertexAttribi(GLuint index, const GLint values[4])
+{
+    ASSERT(index < gl::MAX_VERTEX_ATTRIBS);
+    mVertexAttribCurrentValues[index].setIntValues(values);
+}
+
+void State::setVertexAttribState(unsigned int attribNum, Buffer *boundBuffer, GLint size, GLenum type, bool normalized,
+    bool pureInteger, GLsizei stride, const void *pointer)
+{
+    getVertexArray()->setAttributeState(attribNum, boundBuffer, size, type, normalized, pureInteger, stride, pointer);
+}
+
+const VertexAttribute &State::getVertexAttribState(unsigned int attribNum) const
+{
+    return getVertexArray()->getVertexAttribute(attribNum);
+}
+
+const VertexAttribCurrentValueData &State::getVertexAttribCurrentValue(unsigned int attribNum) const
+{
+    ASSERT(attribNum < MAX_VERTEX_ATTRIBS);
+    return mVertexAttribCurrentValues[attribNum];
+}
+
+const VertexAttribCurrentValueData *State::getVertexAttribCurrentValues() const
+{
+    return mVertexAttribCurrentValues;
+}
+
+const void *State::getVertexAttribPointer(unsigned int attribNum) const
+{
+    return getVertexArray()->getVertexAttribute(attribNum).pointer;
+}
+
+void State::setPackAlignment(GLint alignment)
+{
+    mPack.alignment = alignment;
+}
+
+GLint State::getPackAlignment() const
+{
+    return mPack.alignment;
+}
+
+void State::setPackReverseRowOrder(bool reverseRowOrder)
+{
+    mPack.reverseRowOrder = reverseRowOrder;
+}
+
+bool State::getPackReverseRowOrder() const
+{
+    return mPack.reverseRowOrder;
+}
+
+const PixelPackState &State::getPackState() const
+{
+    return mPack;
+}
+
+void State::setUnpackAlignment(GLint alignment)
+{
+    mUnpack.alignment = alignment;
+}
+
+GLint State::getUnpackAlignment() const
+{
+    return mUnpack.alignment;
+}
+
+const PixelUnpackState &State::getUnpackState() const
+{
+    return mUnpack;
+}
+
+void State::getBooleanv(GLenum pname, GLboolean *params)
+{
+    switch (pname)
+    {
+      case GL_SAMPLE_COVERAGE_INVERT:    *params = mSampleCoverageInvert;         break;
+      case GL_DEPTH_WRITEMASK:           *params = mDepthStencil.depthMask;       break;
+      case GL_COLOR_WRITEMASK:
+        params[0] = mBlend.colorMaskRed;
+        params[1] = mBlend.colorMaskGreen;
+        params[2] = mBlend.colorMaskBlue;
+        params[3] = mBlend.colorMaskAlpha;
+        break;
+      case GL_CULL_FACE:                 *params = mRasterizer.cullFace;          break;
+      case GL_POLYGON_OFFSET_FILL:       *params = mRasterizer.polygonOffsetFill; break;
+      case GL_SAMPLE_ALPHA_TO_COVERAGE:  *params = mBlend.sampleAlphaToCoverage;  break;
+      case GL_SAMPLE_COVERAGE:           *params = mSampleCoverage;               break;
+      case GL_SCISSOR_TEST:              *params = mScissorTest;                  break;
+      case GL_STENCIL_TEST:              *params = mDepthStencil.stencilTest;     break;
+      case GL_DEPTH_TEST:                *params = mDepthStencil.depthTest;       break;
+      case GL_BLEND:                     *params = mBlend.blend;                  break;
+      case GL_DITHER:                    *params = mBlend.dither;                 break;
+      case GL_TRANSFORM_FEEDBACK_ACTIVE: *params = getCurrentTransformFeedback()->isStarted(); break;
+      case GL_TRANSFORM_FEEDBACK_PAUSED: *params = getCurrentTransformFeedback()->isPaused();  break;
+      default:
+        UNREACHABLE();
+        break;
+    }
+}
+
+void State::getFloatv(GLenum pname, GLfloat *params)
+{
+    // Please note: DEPTH_CLEAR_VALUE is included in our internal getFloatv implementation
+    // because it is stored as a float, despite the fact that the GL ES 2.0 spec names
+    // GetIntegerv as its native query function. As it would require conversion in any
+    // case, this should make no difference to the calling application.
+    switch (pname)
+    {
+      case GL_LINE_WIDTH:               *params = mLineWidth;                         break;
+      case GL_SAMPLE_COVERAGE_VALUE:    *params = mSampleCoverageValue;               break;
+      case GL_DEPTH_CLEAR_VALUE:        *params = mDepthClearValue;                   break;
+      case GL_POLYGON_OFFSET_FACTOR:    *params = mRasterizer.polygonOffsetFactor;    break;
+      case GL_POLYGON_OFFSET_UNITS:     *params = mRasterizer.polygonOffsetUnits;     break;
+      case GL_DEPTH_RANGE:
+        params[0] = mNearZ;
+        params[1] = mFarZ;
+        break;
+      case GL_COLOR_CLEAR_VALUE:
+        params[0] = mColorClearValue.red;
+        params[1] = mColorClearValue.green;
+        params[2] = mColorClearValue.blue;
+        params[3] = mColorClearValue.alpha;
+        break;
+      case GL_BLEND_COLOR:
+        params[0] = mBlendColor.red;
+        params[1] = mBlendColor.green;
+        params[2] = mBlendColor.blue;
+        params[3] = mBlendColor.alpha;
+        break;
+      default:
+        UNREACHABLE();
+        break;
+    }
+}
+
+void State::getIntegerv(GLenum pname, GLint *params)
+{
+    if (pname >= GL_DRAW_BUFFER0_EXT && pname <= GL_DRAW_BUFFER15_EXT)
+    {
+        unsigned int colorAttachment = (pname - GL_DRAW_BUFFER0_EXT);
+        ASSERT(colorAttachment < mContext->getCaps().maxDrawBuffers);
+        Framebuffer *framebuffer = mDrawFramebuffer;
+        *params = framebuffer->getDrawBufferState(colorAttachment);
+        return;
+    }
+
+    // Please note: DEPTH_CLEAR_VALUE is not included in our internal getIntegerv implementation
+    // because it is stored as a float, despite the fact that the GL ES 2.0 spec names
+    // GetIntegerv as its native query function. As it would require conversion in any
+    // case, this should make no difference to the calling application. You may find it in
+    // State::getFloatv.
+    switch (pname)
+    {
+      case GL_ARRAY_BUFFER_BINDING:                     *params = mArrayBuffer.id();                              break;
+      case GL_ELEMENT_ARRAY_BUFFER_BINDING:             *params = getVertexArray()->getElementArrayBufferId();    break;
+        //case GL_FRAMEBUFFER_BINDING:                    // now equivalent to GL_DRAW_FRAMEBUFFER_BINDING_ANGLE
+      case GL_DRAW_FRAMEBUFFER_BINDING_ANGLE:           *params = mDrawFramebuffer->id();                         break;
+      case GL_READ_FRAMEBUFFER_BINDING_ANGLE:           *params = mReadFramebuffer->id();                         break;
+      case GL_RENDERBUFFER_BINDING:                     *params = mRenderbuffer.id();                             break;
+      case GL_VERTEX_ARRAY_BINDING:                     *params = mVertexArray->id();                             break;
+      case GL_CURRENT_PROGRAM:                          *params = mCurrentProgramId;                              break;
+      case GL_PACK_ALIGNMENT:                           *params = mPack.alignment;                                break;
+      case GL_PACK_REVERSE_ROW_ORDER_ANGLE:             *params = mPack.reverseRowOrder;                          break;
+      case GL_UNPACK_ALIGNMENT:                         *params = mUnpack.alignment;                              break;
+      case GL_GENERATE_MIPMAP_HINT:                     *params = mGenerateMipmapHint;                            break;
+      case GL_FRAGMENT_SHADER_DERIVATIVE_HINT_OES:      *params = mFragmentShaderDerivativeHint;                  break;
+      case GL_ACTIVE_TEXTURE:                           *params = (mActiveSampler + GL_TEXTURE0);                 break;
+      case GL_STENCIL_FUNC:                             *params = mDepthStencil.stencilFunc;                      break;
+      case GL_STENCIL_REF:                              *params = mStencilRef;                                    break;
+      case GL_STENCIL_VALUE_MASK:                       *params = clampToInt(mDepthStencil.stencilMask);          break;
+      case GL_STENCIL_BACK_FUNC:                        *params = mDepthStencil.stencilBackFunc;                  break;
+      case GL_STENCIL_BACK_REF:                         *params = mStencilBackRef;                                break;
+      case GL_STENCIL_BACK_VALUE_MASK:                  *params = clampToInt(mDepthStencil.stencilBackMask);      break;
+      case GL_STENCIL_FAIL:                             *params = mDepthStencil.stencilFail;                      break;
+      case GL_STENCIL_PASS_DEPTH_FAIL:                  *params = mDepthStencil.stencilPassDepthFail;             break;
+      case GL_STENCIL_PASS_DEPTH_PASS:                  *params = mDepthStencil.stencilPassDepthPass;             break;
+      case GL_STENCIL_BACK_FAIL:                        *params = mDepthStencil.stencilBackFail;                  break;
+      case GL_STENCIL_BACK_PASS_DEPTH_FAIL:             *params = mDepthStencil.stencilBackPassDepthFail;         break;
+      case GL_STENCIL_BACK_PASS_DEPTH_PASS:             *params = mDepthStencil.stencilBackPassDepthPass;         break;
+      case GL_DEPTH_FUNC:                               *params = mDepthStencil.depthFunc;                        break;
+      case GL_BLEND_SRC_RGB:                            *params = mBlend.sourceBlendRGB;                          break;
+      case GL_BLEND_SRC_ALPHA:                          *params = mBlend.sourceBlendAlpha;                        break;
+      case GL_BLEND_DST_RGB:                            *params = mBlend.destBlendRGB;                            break;
+      case GL_BLEND_DST_ALPHA:                          *params = mBlend.destBlendAlpha;                          break;
+      case GL_BLEND_EQUATION_RGB:                       *params = mBlend.blendEquationRGB;                        break;
+      case GL_BLEND_EQUATION_ALPHA:                     *params = mBlend.blendEquationAlpha;                      break;
+      case GL_STENCIL_WRITEMASK:                        *params = clampToInt(mDepthStencil.stencilWritemask);     break;
+      case GL_STENCIL_BACK_WRITEMASK:                   *params = clampToInt(mDepthStencil.stencilBackWritemask); break;
+      case GL_STENCIL_CLEAR_VALUE:                      *params = mStencilClearValue;                             break;
+      case GL_SAMPLE_BUFFERS:
+      case GL_SAMPLES:
+        {
+            gl::Framebuffer *framebuffer = mDrawFramebuffer;
+            if (framebuffer->completeness() == GL_FRAMEBUFFER_COMPLETE)
+            {
+                switch (pname)
+                {
+                  case GL_SAMPLE_BUFFERS:
+                    if (framebuffer->getSamples() != 0)
+                    {
+                        *params = 1;
+                    }
+                    else
+                    {
+                        *params = 0;
+                    }
+                    break;
+                  case GL_SAMPLES:
+                    *params = framebuffer->getSamples();
+                    break;
+                }
+            }
+            else
+            {
+                *params = 0;
+            }
+        }
+        break;
+      case GL_VIEWPORT:
+        params[0] = mViewport.x;
+        params[1] = mViewport.y;
+        params[2] = mViewport.width;
+        params[3] = mViewport.height;
+        break;
+      case GL_SCISSOR_BOX:
+        params[0] = mScissor.x;
+        params[1] = mScissor.y;
+        params[2] = mScissor.width;
+        params[3] = mScissor.height;
+        break;
+      case GL_CULL_FACE_MODE:                   *params = mRasterizer.cullMode;   break;
+      case GL_FRONT_FACE:                       *params = mRasterizer.frontFace;  break;
+      case GL_RED_BITS:
+      case GL_GREEN_BITS:
+      case GL_BLUE_BITS:
+      case GL_ALPHA_BITS:
+        {
+            gl::Framebuffer *framebuffer = getDrawFramebuffer();
+            gl::FramebufferAttachment *colorbuffer = framebuffer->getFirstColorbuffer();
+
+            if (colorbuffer)
+            {
+                switch (pname)
+                {
+                case GL_RED_BITS:   *params = colorbuffer->getRedSize();      break;
+                case GL_GREEN_BITS: *params = colorbuffer->getGreenSize();    break;
+                case GL_BLUE_BITS:  *params = colorbuffer->getBlueSize();     break;
+                case GL_ALPHA_BITS: *params = colorbuffer->getAlphaSize();    break;
+                }
+            }
+            else
+            {
+                *params = 0;
+            }
+        }
+        break;
+      case GL_DEPTH_BITS:
+        {
+            gl::Framebuffer *framebuffer = getDrawFramebuffer();
+            gl::FramebufferAttachment *depthbuffer = framebuffer->getDepthbuffer();
+
+            if (depthbuffer)
+            {
+                *params = depthbuffer->getDepthSize();
+            }
+            else
+            {
+                *params = 0;
+            }
+        }
+        break;
+      case GL_STENCIL_BITS:
+        {
+            gl::Framebuffer *framebuffer = getDrawFramebuffer();
+            gl::FramebufferAttachment *stencilbuffer = framebuffer->getStencilbuffer();
+
+            if (stencilbuffer)
+            {
+                *params = stencilbuffer->getStencilSize();
+            }
+            else
+            {
+                *params = 0;
+            }
+        }
+        break;
+      case GL_TEXTURE_BINDING_2D:
+        ASSERT(mActiveSampler < mContext->getCaps().maxCombinedTextureImageUnits);
+        *params = mSamplerTextures.at(GL_TEXTURE_2D)[mActiveSampler].id();
+        break;
+      case GL_TEXTURE_BINDING_CUBE_MAP:
+        ASSERT(mActiveSampler < mContext->getCaps().maxCombinedTextureImageUnits);
+        *params = mSamplerTextures.at(GL_TEXTURE_CUBE_MAP)[mActiveSampler].id();
+        break;
+      case GL_TEXTURE_BINDING_3D:
+        ASSERT(mActiveSampler <mContext->getCaps().maxCombinedTextureImageUnits);
+        *params = mSamplerTextures.at(GL_TEXTURE_3D)[mActiveSampler].id();
+        break;
+      case GL_TEXTURE_BINDING_2D_ARRAY:
+        ASSERT(mActiveSampler < mContext->getCaps().maxCombinedTextureImageUnits);
+        *params = mSamplerTextures.at(GL_TEXTURE_2D_ARRAY)[mActiveSampler].id();
+        break;
+      case GL_UNIFORM_BUFFER_BINDING:
+        *params = mGenericUniformBuffer.id();
+        break;
+      case GL_TRANSFORM_FEEDBACK_BUFFER_BINDING:
+        *params = mGenericTransformFeedbackBuffer.id();
+        break;
+      case GL_COPY_READ_BUFFER_BINDING:
+        *params = mCopyReadBuffer.id();
+        break;
+      case GL_COPY_WRITE_BUFFER_BINDING:
+        *params = mCopyWriteBuffer.id();
+        break;
+      case GL_PIXEL_PACK_BUFFER_BINDING:
+        *params = mPack.pixelBuffer.id();
+        break;
+      case GL_PIXEL_UNPACK_BUFFER_BINDING:
+        *params = mUnpack.pixelBuffer.id();
+        break;
+      default:
+        UNREACHABLE();
+        break;
+    }
+}
+
+bool State::getIndexedIntegerv(GLenum target, GLuint index, GLint *data)
+{
+    switch (target)
+    {
+      case GL_TRANSFORM_FEEDBACK_BUFFER_BINDING:
+        if (index < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS)
+        {
+            *data = mTransformFeedbackBuffers[index].id();
+        }
+        break;
+      case GL_UNIFORM_BUFFER_BINDING:
+        if (index < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS)
+        {
+            *data = mUniformBuffers[index].id();
+        }
+        break;
+      default:
+        return false;
+    }
+
+    return true;
+}
+
+bool State::getIndexedInteger64v(GLenum target, GLuint index, GLint64 *data)
+{
+    switch (target)
+    {
+      case GL_TRANSFORM_FEEDBACK_BUFFER_START:
+        if (index < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS)
+        {
+            *data = mTransformFeedbackBuffers[index].getOffset();
+        }
+        break;
+      case GL_TRANSFORM_FEEDBACK_BUFFER_SIZE:
+        if (index < IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS)
+        {
+            *data = mTransformFeedbackBuffers[index].getSize();
+        }
+        break;
+      case GL_UNIFORM_BUFFER_START:
+        if (index < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS)
+        {
+            *data = mUniformBuffers[index].getOffset();
+        }
+        break;
+      case GL_UNIFORM_BUFFER_SIZE:
+        if (index < IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS)
+        {
+            *data = mUniformBuffers[index].getSize();
+        }
+        break;
+      default:
+        return false;
+    }
+
+    return true;
+}
+
+bool State::hasMappedBuffer(GLenum target) const
+{
+    if (target == GL_ARRAY_BUFFER)
+    {
+        for (unsigned int attribIndex = 0; attribIndex < gl::MAX_VERTEX_ATTRIBS; attribIndex++)
+        {
+            const gl::VertexAttribute &vertexAttrib = getVertexAttribState(attribIndex);
+            gl::Buffer *boundBuffer = vertexAttrib.buffer.get();
+            if (vertexAttrib.enabled && boundBuffer && boundBuffer->isMapped())
+            {
+                return true;
+            }
+        }
+
+        return false;
+    }
+    else
+    {
+        Buffer *buffer = getTargetBuffer(target);
+        return (buffer && buffer->isMapped());
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/State.h b/src/3rdparty/angle/src/libGLESv2/State.h
new file mode 100644
index 0000000000..5f0433136c
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/State.h
@@ -0,0 +1,319 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// State.h: Defines the State class, encapsulating raw GL state
+
+#ifndef LIBGLESV2_STATE_H_
+#define LIBGLESV2_STATE_H_
+
+#include "common/angleutils.h"
+#include "common/RefCountObject.h"
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/VertexAttribute.h"
+#include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/TransformFeedback.h"
+#include "libGLESv2/Program.h"
+#include "libGLESv2/Sampler.h"
+
+namespace gl
+{
+class Query;
+class VertexArray;
+class Context;
+struct Caps;
+
+class State
+{
+  public:
+    State();
+    ~State();
+
+    void initialize(const Caps& caps, GLuint clientVersion);
+    void reset();
+
+    void setContext(Context *context) { mContext = context; }
+
+    // State chunk getters
+    const RasterizerState &getRasterizerState() const;
+    const BlendState &getBlendState() const;
+    const DepthStencilState &getDepthStencilState() const;
+
+    // Clear behavior setters & state parameter block generation function
+    void setClearColor(float red, float green, float blue, float alpha);
+    void setClearDepth(float depth);
+    void setClearStencil(int stencil);
+    ClearParameters getClearParameters(GLbitfield mask) const;
+
+    // Write mask manipulation
+    void setColorMask(bool red, bool green, bool blue, bool alpha);
+    void setDepthMask(bool mask);
+
+    // Discard toggle & query
+    bool isRasterizerDiscardEnabled() const;
+    void setRasterizerDiscard(bool enabled);
+
+    // Face culling state manipulation
+    bool isCullFaceEnabled() const;
+    void setCullFace(bool enabled);
+    void setCullMode(GLenum mode);
+    void setFrontFace(GLenum front);
+
+    // Depth test state manipulation
+    bool isDepthTestEnabled() const;
+    void setDepthTest(bool enabled);
+    void setDepthFunc(GLenum depthFunc);
+    void setDepthRange(float zNear, float zFar);
+    void getDepthRange(float *zNear, float *zFar) const;
+
+    // Blend state manipulation
+    bool isBlendEnabled() const;
+    void setBlend(bool enabled);
+    void setBlendFactors(GLenum sourceRGB, GLenum destRGB, GLenum sourceAlpha, GLenum destAlpha);
+    void setBlendColor(float red, float green, float blue, float alpha);
+    void setBlendEquation(GLenum rgbEquation, GLenum alphaEquation);
+    const ColorF &getBlendColor() const;
+
+    // Stencil state maniupulation
+    bool isStencilTestEnabled() const;
+    void setStencilTest(bool enabled);
+    void setStencilParams(GLenum stencilFunc, GLint stencilRef, GLuint stencilMask);
+    void setStencilBackParams(GLenum stencilBackFunc, GLint stencilBackRef, GLuint stencilBackMask);
+    void setStencilWritemask(GLuint stencilWritemask);
+    void setStencilBackWritemask(GLuint stencilBackWritemask);
+    void setStencilOperations(GLenum stencilFail, GLenum stencilPassDepthFail, GLenum stencilPassDepthPass);
+    void setStencilBackOperations(GLenum stencilBackFail, GLenum stencilBackPassDepthFail, GLenum stencilBackPassDepthPass);
+    GLint getStencilRef() const;
+    GLint getStencilBackRef() const;
+
+    // Depth bias/polygon offset state manipulation
+    bool isPolygonOffsetFillEnabled() const;
+    void setPolygonOffsetFill(bool enabled);
+    void setPolygonOffsetParams(GLfloat factor, GLfloat units);
+
+    // Multisample coverage state manipulation
+    bool isSampleAlphaToCoverageEnabled() const;
+    void setSampleAlphaToCoverage(bool enabled);
+    bool isSampleCoverageEnabled() const;
+    void setSampleCoverage(bool enabled);
+    void setSampleCoverageParams(GLclampf value, bool invert);
+    void getSampleCoverageParams(GLclampf *value, bool *invert);
+
+    // Scissor test state toggle & query
+    bool isScissorTestEnabled() const;
+    void setScissorTest(bool enabled);
+    void setScissorParams(GLint x, GLint y, GLsizei width, GLsizei height);
+    const Rectangle &getScissor() const;
+
+    // Dither state toggle & query
+    bool isDitherEnabled() const;
+    void setDither(bool enabled);
+
+    // Generic state toggle & query
+    void setEnableFeature(GLenum feature, bool enabled);
+    bool getEnableFeature(GLenum feature);
+
+    // Line width state setter
+    void setLineWidth(GLfloat width);
+
+    // Hint setters
+    void setGenerateMipmapHint(GLenum hint);
+    void setFragmentShaderDerivativeHint(GLenum hint);
+
+    // Viewport state setter/getter
+    void setViewportParams(GLint x, GLint y, GLsizei width, GLsizei height);
+    const Rectangle &getViewport() const;
+
+    // Texture binding & active texture unit manipulation
+    void setActiveSampler(unsigned int active);
+    unsigned int getActiveSampler() const;
+    void setSamplerTexture(GLenum type, Texture *texture);
+    Texture *getSamplerTexture(unsigned int sampler, GLenum type) const;
+    GLuint getSamplerTextureId(unsigned int sampler, GLenum type) const;
+    void detachTexture(GLuint texture);
+
+    // Sampler object binding manipulation
+    void setSamplerBinding(GLuint textureUnit, Sampler *sampler);
+    GLuint getSamplerId(GLuint textureUnit) const;
+    Sampler *getSampler(GLuint textureUnit) const;
+    void detachSampler(GLuint sampler);
+
+    // Renderbuffer binding manipulation
+    void setRenderbufferBinding(Renderbuffer *renderbuffer);
+    GLuint getRenderbufferId() const;
+    Renderbuffer *getCurrentRenderbuffer();
+    void detachRenderbuffer(GLuint renderbuffer);
+
+    // Framebuffer binding manipulation
+    void setReadFramebufferBinding(Framebuffer *framebuffer);
+    void setDrawFramebufferBinding(Framebuffer *framebuffer);
+    Framebuffer *getTargetFramebuffer(GLenum target) const;
+    Framebuffer *getReadFramebuffer();
+    Framebuffer *getDrawFramebuffer();
+    const Framebuffer *getReadFramebuffer() const;
+    const Framebuffer *getDrawFramebuffer() const;
+    bool removeReadFramebufferBinding(GLuint framebuffer);
+    bool removeDrawFramebufferBinding(GLuint framebuffer);
+
+    // Vertex array object binding manipulation
+    void setVertexArrayBinding(VertexArray *vertexArray);
+    GLuint getVertexArrayId() const;
+    VertexArray *getVertexArray() const;
+    bool removeVertexArrayBinding(GLuint vertexArray);
+
+    // Program binding manipulation
+    void setCurrentProgram(GLuint programId, Program *newProgram);
+    void setCurrentProgramBinary(ProgramBinary *binary);
+    GLuint getCurrentProgramId() const;
+    ProgramBinary *getCurrentProgramBinary() const;
+
+    // Transform feedback object (not buffer) binding manipulation
+    void setTransformFeedbackBinding(TransformFeedback *transformFeedback);
+    TransformFeedback *getCurrentTransformFeedback() const;
+    void detachTransformFeedback(GLuint transformFeedback);
+
+    // Query binding manipulation
+    bool isQueryActive() const;
+    void setActiveQuery(GLenum target, Query *query);
+    GLuint getActiveQueryId(GLenum target) const;
+    Query *getActiveQuery(GLenum target) const;
+
+    //// Typed buffer binding point manipulation ////
+    // GL_ARRAY_BUFFER
+    void setArrayBufferBinding(Buffer *buffer);
+    GLuint getArrayBufferId() const;
+    bool removeArrayBufferBinding(GLuint buffer);
+
+    // GL_UNIFORM_BUFFER - Both indexed and generic targets
+    void setGenericUniformBufferBinding(Buffer *buffer);
+    void setIndexedUniformBufferBinding(GLuint index, Buffer *buffer, GLintptr offset, GLsizeiptr size);
+    GLuint getIndexedUniformBufferId(GLuint index) const;
+    Buffer *getIndexedUniformBuffer(GLuint index) const;
+
+    // GL_TRANSFORM_FEEDBACK_BUFFER - Both indexed and generic targets
+    void setGenericTransformFeedbackBufferBinding(Buffer *buffer);
+    void setIndexedTransformFeedbackBufferBinding(GLuint index, Buffer *buffer, GLintptr offset, GLsizeiptr size);
+    GLuint getIndexedTransformFeedbackBufferId(GLuint index) const;
+    Buffer *getIndexedTransformFeedbackBuffer(GLuint index) const;
+    GLuint getIndexedTransformFeedbackBufferOffset(GLuint index) const;
+
+    // GL_COPY_[READ/WRITE]_BUFFER
+    void setCopyReadBufferBinding(Buffer *buffer);
+    void setCopyWriteBufferBinding(Buffer *buffer);
+
+    // GL_PIXEL[PACK/UNPACK]_BUFFER
+    void setPixelPackBufferBinding(Buffer *buffer);
+    void setPixelUnpackBufferBinding(Buffer *buffer);
+
+    // Retrieve typed buffer by target (non-indexed)
+    Buffer *getTargetBuffer(GLenum target) const;
+
+    // Vertex attrib manipulation
+    void setEnableVertexAttribArray(unsigned int attribNum, bool enabled);
+    void setVertexAttribf(GLuint index, const GLfloat values[4]);
+    void setVertexAttribu(GLuint index, const GLuint values[4]);
+    void setVertexAttribi(GLuint index, const GLint values[4]);
+    void setVertexAttribState(unsigned int attribNum, Buffer *boundBuffer, GLint size, GLenum type,
+                              bool normalized, bool pureInteger, GLsizei stride, const void *pointer);
+    const VertexAttribute &getVertexAttribState(unsigned int attribNum) const;
+    const VertexAttribCurrentValueData &getVertexAttribCurrentValue(unsigned int attribNum) const;
+    const VertexAttribCurrentValueData *getVertexAttribCurrentValues() const;
+    const void *getVertexAttribPointer(unsigned int attribNum) const;
+
+    // Pixel pack state manipulation
+    void setPackAlignment(GLint alignment);
+    GLint getPackAlignment() const;
+    void setPackReverseRowOrder(bool reverseRowOrder);
+    bool getPackReverseRowOrder() const;
+    const PixelPackState &getPackState() const;
+
+    // Pixel unpack state manipulation
+    void setUnpackAlignment(GLint alignment);
+    GLint getUnpackAlignment() const;
+    const PixelUnpackState &getUnpackState() const;
+
+    // State query functions
+    void getBooleanv(GLenum pname, GLboolean *params);
+    void getFloatv(GLenum pname, GLfloat *params);
+    void getIntegerv(GLenum pname, GLint *params);
+    bool getIndexedIntegerv(GLenum target, GLuint index, GLint *data);
+    bool getIndexedInteger64v(GLenum target, GLuint index, GLint64 *data);
+
+    bool hasMappedBuffer(GLenum target) const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(State);
+
+    Context *mContext;
+
+    ColorF mColorClearValue;
+    GLclampf mDepthClearValue;
+    int mStencilClearValue;
+
+    RasterizerState mRasterizer;
+    bool mScissorTest;
+    Rectangle mScissor;
+
+    BlendState mBlend;
+    ColorF mBlendColor;
+    bool mSampleCoverage;
+    GLclampf mSampleCoverageValue;
+    bool mSampleCoverageInvert;
+
+    DepthStencilState mDepthStencil;
+    GLint mStencilRef;
+    GLint mStencilBackRef;
+
+    GLfloat mLineWidth;
+
+    GLenum mGenerateMipmapHint;
+    GLenum mFragmentShaderDerivativeHint;
+
+    Rectangle mViewport;
+    float mNearZ;
+    float mFarZ;
+
+    BindingPointer<Buffer> mArrayBuffer;
+    Framebuffer *mReadFramebuffer;
+    Framebuffer *mDrawFramebuffer;
+    BindingPointer<Renderbuffer> mRenderbuffer;
+    GLuint mCurrentProgramId;
+    BindingPointer<ProgramBinary> mCurrentProgramBinary;
+
+    VertexAttribCurrentValueData mVertexAttribCurrentValues[MAX_VERTEX_ATTRIBS]; // From glVertexAttrib
+    VertexArray *mVertexArray;
+
+    // Texture and sampler bindings
+    size_t mActiveSampler;   // Active texture unit selector - GL_TEXTURE0
+
+    typedef std::vector< BindingPointer<Texture> > TextureBindingVector;
+    typedef std::map<GLenum, TextureBindingVector> TextureBindingMap;
+    TextureBindingMap mSamplerTextures;
+
+    typedef std::vector< BindingPointer<Sampler> > SamplerBindingVector;
+    SamplerBindingVector mSamplers;
+
+    typedef std::map< GLenum, BindingPointer<Query> > ActiveQueryMap;
+    ActiveQueryMap mActiveQueries;
+
+    BindingPointer<Buffer> mGenericUniformBuffer;
+    OffsetBindingPointer<Buffer> mUniformBuffers[IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS];
+
+    BindingPointer<TransformFeedback> mTransformFeedback;
+    BindingPointer<Buffer> mGenericTransformFeedbackBuffer;
+    OffsetBindingPointer<Buffer> mTransformFeedbackBuffers[IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+
+    BindingPointer<Buffer> mCopyReadBuffer;
+    BindingPointer<Buffer> mCopyWriteBuffer;
+
+    PixelUnpackState mUnpack;
+    PixelPackState mPack;
+};
+
+}
+
+#endif // LIBGLESV2_STATE_H_
+
diff --git a/src/3rdparty/angle/src/libGLESv2/Texture.cpp b/src/3rdparty/angle/src/libGLESv2/Texture.cpp
index 3257d05dd4..3ec492de07 100644
--- a/src/3rdparty/angle/src/libGLESv2/Texture.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Texture.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,350 +9,195 @@
 // functionality. [OpenGL ES 2.0.24] section 3.7 page 63.
 
 #include "libGLESv2/Texture.h"
-
 #include "libGLESv2/main.h"
-#include "libGLESv2/mathutil.h"
-#include "libGLESv2/utilities.h"
-#if defined(ANGLE_ENABLE_D3D9)
-#  include "libGLESv2/renderer/d3d9/Blit.h"
-#else
-#  define D3DFMT_UNKNOWN DXGI_FORMAT_UNKNOWN
-#endif
+#include "libGLESv2/Context.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/ImageIndex.h"
 #include "libGLESv2/Renderbuffer.h"
 #include "libGLESv2/renderer/Image.h"
-#include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/renderer/TextureStorage.h"
-#include "libEGL/Surface.h"
-
-namespace gl
-{
+#include "libGLESv2/renderer/d3d/TextureStorage.h"
 
-Texture::Texture(rx::Renderer *renderer, GLuint id) : RefCountObject(id)
-{
-    mRenderer = renderer;
+#include "libEGL/Surface.h"
 
-    mSamplerState.minFilter = GL_NEAREST_MIPMAP_LINEAR;
-    mSamplerState.magFilter = GL_LINEAR;
-    mSamplerState.wrapS = GL_REPEAT;
-    mSamplerState.wrapT = GL_REPEAT;
-    mSamplerState.maxAnisotropy = 1.0f;
-    mSamplerState.lodOffset = 0;
-    mUsage = GL_NONE;
-    
-    mDirtyImages = true;
+#include "common/mathutil.h"
+#include "common/utilities.h"
 
-    mImmutable = false;
-}
-
-Texture::~Texture()
+namespace gl
 {
-}
 
-// Returns true on successful filter state update (valid enum parameter)
-bool Texture::setMinFilter(GLenum filter)
+bool IsMipmapFiltered(const gl::SamplerState &samplerState)
 {
-    switch (filter)
+    switch (samplerState.minFilter)
     {
       case GL_NEAREST:
       case GL_LINEAR:
+        return false;
       case GL_NEAREST_MIPMAP_NEAREST:
       case GL_LINEAR_MIPMAP_NEAREST:
       case GL_NEAREST_MIPMAP_LINEAR:
       case GL_LINEAR_MIPMAP_LINEAR:
-        mSamplerState.minFilter = filter;
         return true;
-      default:
+      default: UNREACHABLE();
         return false;
     }
 }
 
-// Returns true on successful filter state update (valid enum parameter)
-bool Texture::setMagFilter(GLenum filter)
+bool IsPointSampled(const gl::SamplerState &samplerState)
 {
-    switch (filter)
-    {
-      case GL_NEAREST:
-      case GL_LINEAR:
-        mSamplerState.magFilter = filter;
-        return true;
-      default:
-        return false;
-    }
+    return (samplerState.magFilter == GL_NEAREST && (samplerState.minFilter == GL_NEAREST || samplerState.minFilter == GL_NEAREST_MIPMAP_NEAREST));
 }
 
-// Returns true on successful wrap state update (valid enum parameter)
-bool Texture::setWrapS(GLenum wrap)
+Texture::Texture(rx::TextureImpl *impl, GLuint id, GLenum target)
+    : RefCountObject(id),
+      mTexture(impl),
+      mUsage(GL_NONE),
+      mImmutable(false),
+      mTarget(target)
 {
-    switch (wrap)
-    {
-      case GL_REPEAT:
-      case GL_CLAMP_TO_EDGE:
-      case GL_MIRRORED_REPEAT:
-        mSamplerState.wrapS = wrap;
-        return true;
-      default:
-        return false;
-    }
 }
 
-// Returns true on successful wrap state update (valid enum parameter)
-bool Texture::setWrapT(GLenum wrap)
+Texture::~Texture()
 {
-    switch (wrap)
-    {
-      case GL_REPEAT:
-      case GL_CLAMP_TO_EDGE:
-      case GL_MIRRORED_REPEAT:
-        mSamplerState.wrapT = wrap;
-        return true;
-      default:
-        return false;
-    }
+    SafeDelete(mTexture);
 }
 
-// Returns true on successful max anisotropy update (valid anisotropy value)
-bool Texture::setMaxAnisotropy(float textureMaxAnisotropy, float contextMaxAnisotropy)
+GLenum Texture::getTarget() const
 {
-    textureMaxAnisotropy = std::min(textureMaxAnisotropy, contextMaxAnisotropy);
-    if (textureMaxAnisotropy < 1.0f)
-    {
-        return false;
-    }
-
-    mSamplerState.maxAnisotropy = textureMaxAnisotropy;
-
-    return true;
+    return mTarget;
 }
 
-// Returns true on successful usage state update (valid enum parameter)
-bool Texture::setUsage(GLenum usage)
+void Texture::setUsage(GLenum usage)
 {
-    switch (usage)
-    {
-      case GL_NONE:
-      case GL_FRAMEBUFFER_ATTACHMENT_ANGLE:
-        mUsage = usage;
-        return true;
-      default:
-        return false;
-    }
+    mUsage = usage;
+    getImplementation()->setUsage(usage);
 }
 
-GLenum Texture::getMinFilter() const
+void Texture::getSamplerStateWithNativeOffset(SamplerState *sampler)
 {
-    return mSamplerState.minFilter;
-}
+    *sampler = mSamplerState;
 
-GLenum Texture::getMagFilter() const
-{
-    return mSamplerState.magFilter;
+    // Offset the effective base level by the texture storage's top level
+    rx::TextureStorage *texture = getNativeTexture();
+    int topLevel = texture ? texture->getTopLevel() : 0;
+    sampler->baseLevel = topLevel + mSamplerState.baseLevel;
 }
 
-GLenum Texture::getWrapS() const
+GLenum Texture::getUsage() const
 {
-    return mSamplerState.wrapS;
+    return mUsage;
 }
 
-GLenum Texture::getWrapT() const
+GLint Texture::getBaseLevelWidth() const
 {
-    return mSamplerState.wrapT;
+    const rx::Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getWidth() : 0);
 }
 
-float Texture::getMaxAnisotropy() const
+GLint Texture::getBaseLevelHeight() const
 {
-    return mSamplerState.maxAnisotropy;
+    const rx::Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getHeight() : 0);
 }
 
-int Texture::getLodOffset()
+GLint Texture::getBaseLevelDepth() const
 {
-    rx::TextureStorageInterface *texture = getStorage(false);
-    return texture ? texture->getLodOffset() : 0;
+    const rx::Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getDepth() : 0);
 }
 
-void Texture::getSamplerState(SamplerState *sampler)
+// Note: "base level image" is loosely defined to be any image from the base level,
+// where in the base of 2D array textures and cube maps there are several. Don't use
+// the base level image for anything except querying texture format and size.
+GLenum Texture::getBaseLevelInternalFormat() const
 {
-    *sampler = mSamplerState;
-    sampler->lodOffset = getLodOffset();
+    const rx::Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getInternalFormat() : GL_NONE);
 }
 
-GLenum Texture::getUsage() const
+GLsizei Texture::getWidth(const ImageIndex &index) const
 {
-    return mUsage;
+    rx::Image *image = mTexture->getImage(index);
+    return image->getWidth();
 }
 
-bool Texture::isMipmapFiltered() const
+GLsizei Texture::getHeight(const ImageIndex &index) const
 {
-    switch (mSamplerState.minFilter)
-    {
-      case GL_NEAREST:
-      case GL_LINEAR:
-        return false;
-      case GL_NEAREST_MIPMAP_NEAREST:
-      case GL_LINEAR_MIPMAP_NEAREST:
-      case GL_NEAREST_MIPMAP_LINEAR:
-      case GL_LINEAR_MIPMAP_LINEAR:
-        return true;
-      default: UNREACHABLE();
-        return false;
-    }
+    rx::Image *image = mTexture->getImage(index);
+    return image->getHeight();
 }
 
-void Texture::setImage(GLint unpackAlignment, const void *pixels, rx::Image *image)
+GLenum Texture::getInternalFormat(const ImageIndex &index) const
 {
-    if (pixels != NULL)
-    {
-        image->loadData(0, 0, image->getWidth(), image->getHeight(), unpackAlignment, pixels);
-        mDirtyImages = true;
-    }
+    rx::Image *image = mTexture->getImage(index);
+    return image->getInternalFormat();
 }
 
-void Texture::setCompressedImage(GLsizei imageSize, const void *pixels, rx::Image *image)
+GLenum Texture::getActualFormat(const ImageIndex &index) const
 {
-    if (pixels != NULL)
-    {
-        image->loadCompressedData(0, 0, image->getWidth(), image->getHeight(), pixels);
-        mDirtyImages = true;
-    }
+    rx::Image *image = mTexture->getImage(index);
+    return image->getActualFormat();
 }
 
-bool Texture::subImage(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels, rx::Image *image)
+rx::TextureStorage *Texture::getNativeTexture()
 {
-    if (pixels != NULL)
-    {
-        image->loadData(xoffset, yoffset, width, height, unpackAlignment, pixels);
-        mDirtyImages = true;
-    }
-
-    return true;
+    return getImplementation()->getNativeTexture();
 }
 
-bool Texture::subImageCompressed(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels, rx::Image *image)
+void Texture::generateMipmaps()
 {
-    if (pixels != NULL)
-    {
-        image->loadCompressedData(xoffset, yoffset, width, height, pixels);
-        mDirtyImages = true;
-    }
-
-    return true;
+    getImplementation()->generateMipmaps();
 }
 
-rx::TextureStorageInterface *Texture::getNativeTexture()
+void Texture::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source)
 {
-    // ensure the underlying texture is created
-
-    rx::TextureStorageInterface *storage = getStorage(false);
-    if (storage)
-    {
-        updateTexture();
-    }
-
-    return storage;
-}
-
-bool Texture::hasDirtyImages() const
-{
-    return mDirtyImages;
-}
-
-void Texture::resetDirty()
-{
-    mDirtyImages = false;
+    getImplementation()->copySubImage(target, level, xoffset, yoffset, zoffset, x, y, width, height, source);
 }
 
 unsigned int Texture::getTextureSerial()
 {
-    rx::TextureStorageInterface *texture = getStorage(false);
+    rx::TextureStorage *texture = getNativeTexture();
     return texture ? texture->getTextureSerial() : 0;
 }
 
-unsigned int Texture::getRenderTargetSerial(GLenum target)
+bool Texture::isImmutable() const
 {
-    rx::TextureStorageInterface *texture = getStorage(true);
-    return texture ? texture->getRenderTargetSerial(target) : 0;
+    return mImmutable;
 }
 
-bool Texture::isImmutable() const
+int Texture::immutableLevelCount()
 {
-    return mImmutable;
+    return (mImmutable ? getNativeTexture()->getLevelCount() : 0);
 }
 
-GLint Texture::creationLevels(GLsizei width, GLsizei height) const
+int Texture::mipLevels() const
 {
-    if ((isPow2(width) && isPow2(height)) || mRenderer->getNonPower2TextureSupport())
-    {
-        return 0;   // Maximum number of levels
-    }
-    else
-    {
-        // OpenGL ES 2.0 without GL_OES_texture_npot does not permit NPOT mipmaps.
-        return 1;
-    }
+    return log2(std::max(std::max(getBaseLevelWidth(), getBaseLevelHeight()), getBaseLevelDepth())) + 1;
 }
 
-GLint Texture::creationLevels(GLsizei size) const
+const rx::Image *Texture::getBaseLevelImage() const
 {
-    return creationLevels(size, size);
+    return (getImplementation()->getLayerCount(0) > 0 ? getImplementation()->getImage(0, 0) : NULL);
 }
 
-Texture2D::Texture2D(rx::Renderer *renderer, GLuint id) : Texture(renderer, id)
+Texture2D::Texture2D(rx::TextureImpl *impl, GLuint id)
+    : Texture(impl, id, GL_TEXTURE_2D)
 {
-    mTexStorage = NULL;
     mSurface = NULL;
-    mColorbufferProxy = NULL;
-    mProxyRefs = 0;
-
-    for (int i = 0; i < IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++i)
-    {
-        mImageArray[i] = renderer->createImage();
-    }
 }
 
 Texture2D::~Texture2D()
 {
-    mColorbufferProxy = NULL;
-
-    delete mTexStorage;
-    mTexStorage = NULL;
-    
     if (mSurface)
     {
         mSurface->setBoundTexture(NULL);
         mSurface = NULL;
     }
-
-    for (int i = 0; i < IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++i)
-    {
-        delete mImageArray[i];
-    }
-}
-
-// We need to maintain a count of references to renderbuffers acting as 
-// proxies for this texture, so that we do not attempt to use a pointer 
-// to a renderbuffer proxy which has been deleted.
-void Texture2D::addProxyRef(const Renderbuffer *proxy)
-{
-    mProxyRefs++;
-}
-
-void Texture2D::releaseProxy(const Renderbuffer *proxy)
-{
-    if (mProxyRefs > 0)
-        mProxyRefs--;
-
-    if (mProxyRefs == 0)
-        mColorbufferProxy = NULL;
-}
-
-GLenum Texture2D::getTarget() const
-{
-    return GL_TEXTURE_2D;
 }
 
 GLsizei Texture2D::getWidth(GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[level]->getWidth();
+        return mTexture->getImage(level, 0)->getWidth();
     else
         return 0;
 }
@@ -361,7 +205,7 @@ GLsizei Texture2D::getWidth(GLint level) const
 GLsizei Texture2D::getHeight(GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[level]->getHeight();
+        return mTexture->getImage(level, 0)->getHeight();
     else
         return 0;
 }
@@ -369,7 +213,7 @@ GLsizei Texture2D::getHeight(GLint level) const
 GLenum Texture2D::getInternalFormat(GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[level]->getInternalFormat();
+        return mTexture->getImage(level, 0)->getInternalFormat();
     else
         return GL_NONE;
 }
@@ -377,63 +221,24 @@ GLenum Texture2D::getInternalFormat(GLint level) const
 GLenum Texture2D::getActualFormat(GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[level]->getActualFormat();
+        return mTexture->getImage(level, 0)->getActualFormat();
     else
-        return D3DFMT_UNKNOWN;
+        return GL_NONE;
 }
 
-void Texture2D::redefineImage(GLint level, GLint internalformat, GLsizei width, GLsizei height)
+void Texture2D::setImage(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
     releaseTexImage();
 
-    // If there currently is a corresponding storage texture image, it has these parameters
-    const int storageWidth = std::max(1, mImageArray[0]->getWidth() >> level);
-    const int storageHeight = std::max(1, mImageArray[0]->getHeight() >> level);
-    const int storageFormat = mImageArray[0]->getInternalFormat();
-
-    mImageArray[level]->redefine(mRenderer, internalformat, width, height, false);
-
-    if (mTexStorage)
-    {
-        const int storageLevels = mTexStorage->levelCount();
-        
-        if ((level >= storageLevels && storageLevels != 0) ||
-            width != storageWidth ||
-            height != storageHeight ||
-            internalformat != storageFormat)   // Discard mismatched storage
-        {
-            for (int i = 0; i < IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-            {
-                mImageArray[i]->markDirty();
-            }
-
-            delete mTexStorage;
-            mTexStorage = NULL;
-            mDirtyImages = true;
-        }
-    }
-}
-
-void Texture2D::setImage(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
-{
-    GLint internalformat = ConvertSizedInternalFormat(format, type);
-    redefineImage(level, internalformat, width, height);
-
-    Texture::setImage(unpackAlignment, pixels, mImageArray[level]);
+    mTexture->setImage(GL_TEXTURE_2D, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
 void Texture2D::bindTexImage(egl::Surface *surface)
 {
     releaseTexImage();
 
-    GLint internalformat = surface->getFormat();
-
-    mImageArray[0]->redefine(mRenderer, internalformat, surface->getWidth(), surface->getHeight(), true);
+    mTexture->bindTexImage(surface);
 
-    delete mTexStorage;
-    mTexStorage = new rx::TextureStorageInterface2D(mRenderer, surface->getSwapChain());
-
-    mDirtyImages = true;
     mSurface = surface;
     mSurface->setBoundTexture(this);
 }
@@ -445,192 +250,73 @@ void Texture2D::releaseTexImage()
         mSurface->setBoundTexture(NULL);
         mSurface = NULL;
 
-        if (mTexStorage)
-        {
-            delete mTexStorage;
-            mTexStorage = NULL;
-        }
-
-        for (int i = 0; i < IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-        {
-            mImageArray[i]->redefine(mRenderer, GL_NONE, 0, 0, true);
-        }
+        mTexture->releaseTexImage();
     }
 }
 
 void Texture2D::setCompressedImage(GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei imageSize, const void *pixels)
 {
-    // compressed formats don't have separate sized internal formats-- we can just use the compressed format directly
-    redefineImage(level, format, width, height);
+    releaseTexImage();
 
-    Texture::setCompressedImage(imageSize, pixels, mImageArray[level]);
+    mTexture->setCompressedImage(GL_TEXTURE_2D, level, format, width, height, 1, imageSize, pixels);
 }
 
-void Texture2D::commitRect(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+void Texture2D::subImage(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    if (level < levelCount())
-    {
-        rx::Image *image = mImageArray[level];
-        if (image->updateSurface(mTexStorage, level, xoffset, yoffset, width, height))
-        {
-            image->markClean();
-        }
-    }
-}
-
-void Texture2D::subImage(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
-{
-    if (Texture::subImage(xoffset, yoffset, width, height, format, type, unpackAlignment, pixels, mImageArray[level]))
-    {
-        commitRect(level, xoffset, yoffset, width, height);
-    }
+    mTexture->subImage(GL_TEXTURE_2D, level, xoffset, yoffset, 0, width, height, 1, format, type, unpack, pixels);
 }
 
 void Texture2D::subImageCompressed(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels)
 {
-    if (Texture::subImageCompressed(xoffset, yoffset, width, height, format, imageSize, pixels, mImageArray[level]))
-    {
-        commitRect(level, xoffset, yoffset, width, height);
-    }
+    mTexture->subImageCompressed(GL_TEXTURE_2D, level, xoffset, yoffset, 0, width, height, 1, format, imageSize, pixels);
 }
 
 void Texture2D::copyImage(GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source)
 {
-    GLint internalformat = ConvertSizedInternalFormat(format, GL_UNSIGNED_BYTE);
-    redefineImage(level, internalformat, width, height);
-
-    if (!mImageArray[level]->isRenderableFormat())
-    {
-        mImageArray[level]->copy(0, 0, x, y, width, height, source);
-        mDirtyImages = true;
-    }
-    else
-    {
-        if (!mTexStorage || !mTexStorage->isRenderTarget())
-        {
-            convertToRenderTarget();
-        }
-        
-        mImageArray[level]->markClean();
-
-        if (width != 0 && height != 0 && level < levelCount())
-        {
-            gl::Rectangle sourceRect;
-            sourceRect.x = x;
-            sourceRect.width = width;
-            sourceRect.y = y;
-            sourceRect.height = height;
-
-            mRenderer->copyImage(source, sourceRect, format, 0, 0, mTexStorage, level);
-        }
-    }
-}
-
-void Texture2D::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source)
-{
-    if (xoffset + width > mImageArray[level]->getWidth() || yoffset + height > mImageArray[level]->getHeight())
-    {
-        return gl::error(GL_INVALID_VALUE);
-    }
-
-    if (!mImageArray[level]->isRenderableFormat() || (!mTexStorage && !isSamplerComplete()))
-    {
-        mImageArray[level]->copy(xoffset, yoffset, x, y, width, height, source);
-        mDirtyImages = true;
-    }
-    else
-    {
-        if (!mTexStorage || !mTexStorage->isRenderTarget())
-        {
-            convertToRenderTarget();
-        }
-        
-        updateTexture();
+    releaseTexImage();
 
-        if (level < levelCount())
-        {
-            gl::Rectangle sourceRect;
-            sourceRect.x = x;
-            sourceRect.width = width;
-            sourceRect.y = y;
-            sourceRect.height = height;
-
-            mRenderer->copyImage(source, sourceRect, 
-                                 gl::ExtractFormat(mImageArray[0]->getInternalFormat()),
-                                 xoffset, yoffset, mTexStorage, level);
-        }
-    }
+    mTexture->copyImage(GL_TEXTURE_2D, level, format, x, y, width, height, source);
 }
 
 void Texture2D::storage(GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height)
 {
-    delete mTexStorage;
-    mTexStorage = new rx::TextureStorageInterface2D(mRenderer, levels, internalformat, mUsage, false, width, height);
     mImmutable = true;
 
-    for (int level = 0; level < levels; level++)
-    {
-        mImageArray[level]->redefine(mRenderer, internalformat, width, height, true);
-        width = std::max(1, width >> 1);
-        height = std::max(1, height >> 1);
-    }
-
-    for (int level = levels; level < IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
-    {
-        mImageArray[level]->redefine(mRenderer, GL_NONE, 0, 0, true);
-    }
-
-    if (mTexStorage->isManaged())
-    {
-        int levels = levelCount();
-
-        for (int level = 0; level < levels; level++)
-        {
-            mImageArray[level]->setManagedSurface(mTexStorage, level);
-        }
-    }
+    mTexture->storage(GL_TEXTURE_2D, levels, internalformat, width, height, 1);
 }
 
 // Tests for 2D texture sampling completeness. [OpenGL ES 2.0.24] section 3.8.2 page 85.
-bool Texture2D::isSamplerComplete() const
+bool Texture2D::isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const
 {
-    GLsizei width = mImageArray[0]->getWidth();
-    GLsizei height = mImageArray[0]->getHeight();
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
 
     if (width <= 0 || height <= 0)
     {
         return false;
     }
 
-    bool mipmapping = isMipmapFiltered();
-    bool filtering, renderable;
-
-    if ((IsFloat32Format(getInternalFormat(0)) && !mRenderer->getFloat32TextureSupport(&filtering, &renderable)) ||
-        (IsFloat16Format(getInternalFormat(0)) && !mRenderer->getFloat16TextureSupport(&filtering, &renderable)))
+    if (!textureCaps.get(getInternalFormat(0)).filterable && !IsPointSampled(samplerState))
     {
-        if (mSamplerState.magFilter != GL_NEAREST ||
-            (mSamplerState.minFilter != GL_NEAREST && mSamplerState.minFilter != GL_NEAREST_MIPMAP_NEAREST))
-        {
-            return false;
-        }
+        return false;
     }
 
-    bool npotSupport = mRenderer->getNonPower2TextureSupport();
+    bool npotSupport = extensions.textureNPOT;
 
     if (!npotSupport)
     {
-        if ((mSamplerState.wrapS != GL_CLAMP_TO_EDGE && !isPow2(width)) ||
-            (mSamplerState.wrapT != GL_CLAMP_TO_EDGE && !isPow2(height)))
+        if ((samplerState.wrapS != GL_CLAMP_TO_EDGE && !gl::isPow2(width)) ||
+            (samplerState.wrapT != GL_CLAMP_TO_EDGE && !gl::isPow2(height)))
         {
             return false;
         }
     }
 
-    if (mipmapping)
+    if (IsMipmapFiltered(samplerState))
     {
         if (!npotSupport)
         {
-            if (!isPow2(width) || !isPow2(height))
+            if (!gl::isPow2(width) || !gl::isPow2(height))
             {
                 return false;
             }
@@ -642,42 +328,21 @@ bool Texture2D::isSamplerComplete() const
         }
     }
 
-    return true;
-}
-
-// Tests for 2D texture (mipmap) completeness. [OpenGL ES 2.0.24] section 3.7.10 page 81.
-bool Texture2D::isMipmapComplete() const
-{
-    if (isImmutable())
-    {
-        return true;
-    }
-
-    GLsizei width = mImageArray[0]->getWidth();
-    GLsizei height = mImageArray[0]->getHeight();
-
-    if (width <= 0 || height <= 0)
+    // OpenGLES 3.0.2 spec section 3.8.13 states that a texture is not mipmap complete if:
+    // The internalformat specified for the texture arrays is a sized internal depth or
+    // depth and stencil format (see table 3.13), the value of TEXTURE_COMPARE_-
+    // MODE is NONE, and either the magnification filter is not NEAREST or the mini-
+    // fication filter is neither NEAREST nor NEAREST_MIPMAP_NEAREST.
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(getInternalFormat(0));
+    if (formatInfo.depthBits > 0 && clientVersion > 2)
     {
-        return false;
-    }
-
-    int q = log2(std::max(width, height));
-
-    for (int level = 1; level <= q; level++)
-    {
-        if (mImageArray[level]->getInternalFormat() != mImageArray[0]->getInternalFormat())
-        {
-            return false;
-        }
-
-        if (mImageArray[level]->getWidth() != std::max(1, width >> level))
-        {
-            return false;
-        }
-
-        if (mImageArray[level]->getHeight() != std::max(1, height >> level))
+        if (samplerState.compareMode == GL_NONE)
         {
-            return false;
+            if ((samplerState.minFilter != GL_NEAREST && samplerState.minFilter != GL_NEAREST_MIPMAP_NEAREST) ||
+                samplerState.magFilter != GL_NEAREST)
+            {
+                return false;
+            }
         }
     }
 
@@ -686,272 +351,94 @@ bool Texture2D::isMipmapComplete() const
 
 bool Texture2D::isCompressed(GLint level) const
 {
-    return IsCompressed(getInternalFormat(level));
+    return GetInternalFormatInfo(getInternalFormat(level)).compressed;
 }
 
 bool Texture2D::isDepth(GLint level) const
 {
-    return IsDepthTexture(getInternalFormat(level));
+    return GetInternalFormatInfo(getInternalFormat(level)).depthBits > 0;
 }
 
-// Constructs a native texture resource from the texture images
-void Texture2D::createTexture()
-{
-    GLsizei width = mImageArray[0]->getWidth();
-    GLsizei height = mImageArray[0]->getHeight();
-
-    if (!(width > 0 && height > 0))
-        return; // do not attempt to create native textures for nonexistant data
-
-    GLint levels = creationLevels(width, height);
-    GLenum internalformat = mImageArray[0]->getInternalFormat();
-
-    delete mTexStorage;
-    mTexStorage = new rx::TextureStorageInterface2D(mRenderer, levels, internalformat, mUsage, false, width, height);
-    
-    if (mTexStorage->isManaged())
-    {
-        int levels = levelCount();
-
-        for (int level = 0; level < levels; level++)
-        {
-            mImageArray[level]->setManagedSurface(mTexStorage, level);
-        }
-    }
-
-    mDirtyImages = true;
-}
-
-void Texture2D::updateTexture()
+void Texture2D::generateMipmaps()
 {
-    bool mipmapping = (isMipmapFiltered() && isMipmapComplete());
-
-    int levels = (mipmapping ? levelCount() : 1);
-
-    for (int level = 0; level < levels; level++)
-    {
-        rx::Image *image = mImageArray[level];
+    releaseTexImage();
 
-        if (image->isDirty())
-        {
-            commitRect(level, 0, 0, mImageArray[level]->getWidth(), mImageArray[level]->getHeight());
-        }
-    }
+    mTexture->generateMipmaps();
 }
 
-void Texture2D::convertToRenderTarget()
+// Tests for 2D texture (mipmap) completeness. [OpenGL ES 2.0.24] section 3.7.10 page 81.
+bool Texture2D::isMipmapComplete() const
 {
-    rx::TextureStorageInterface2D *newTexStorage = NULL;
-
-    if (mImageArray[0]->getWidth() != 0 && mImageArray[0]->getHeight() != 0)
-    {
-        GLsizei width = mImageArray[0]->getWidth();
-        GLsizei height = mImageArray[0]->getHeight();
-        GLint levels = mTexStorage != NULL ? mTexStorage->levelCount() : creationLevels(width, height);
-        GLenum internalformat = mImageArray[0]->getInternalFormat();
-
-        newTexStorage = new rx::TextureStorageInterface2D(mRenderer, levels, internalformat, GL_FRAMEBUFFER_ATTACHMENT_ANGLE, true, width, height);
-
-        if (mTexStorage != NULL)
-        {
-            if (!mRenderer->copyToRenderTarget(newTexStorage, mTexStorage))
-            {   
-                delete newTexStorage;
-                return gl::error(GL_OUT_OF_MEMORY);
-            }
-        }
-    }
-
-    delete mTexStorage;
-    mTexStorage = newTexStorage;
-
-    mDirtyImages = true;
-}
+    int levelCount = mipLevels();
 
-void Texture2D::generateMipmaps()
-{
-    if (!mRenderer->getNonPower2TextureSupport())
+    for (int level = 0; level < levelCount; level++)
     {
-        if (!isPow2(mImageArray[0]->getWidth()) || !isPow2(mImageArray[0]->getHeight()))
+        if (!isLevelComplete(level))
         {
-            return gl::error(GL_INVALID_OPERATION);
+            return false;
         }
     }
 
-    // Purge array levels 1 through q and reset them to represent the generated mipmap levels.
-    unsigned int q = log2(std::max(mImageArray[0]->getWidth(), mImageArray[0]->getHeight()));
-    for (unsigned int i = 1; i <= q; i++)
-    {
-        redefineImage(i, mImageArray[0]->getInternalFormat(),
-                      std::max(mImageArray[0]->getWidth() >> i, 1),
-                      std::max(mImageArray[0]->getHeight() >> i, 1));
-    }
-
-    if (mTexStorage && mTexStorage->isRenderTarget())
-    {
-        for (unsigned int i = 1; i <= q; i++)
-        {
-            mTexStorage->generateMipmap(i);
-
-            mImageArray[i]->markClean();
-        }
-    }
-    else
-    {
-        for (unsigned int i = 1; i <= q; i++)
-        {
-            mRenderer->generateMipmap(mImageArray[i], mImageArray[i - 1]);
-        }
-    }
+    return true;
 }
 
-Renderbuffer *Texture2D::getRenderbuffer(GLenum target)
+bool Texture2D::isLevelComplete(int level) const
 {
-    if (target != GL_TEXTURE_2D)
-    {
-        return gl::error(GL_INVALID_OPERATION, (Renderbuffer *)NULL);
-    }
-
-    if (mColorbufferProxy == NULL)
+    if (isImmutable())
     {
-        mColorbufferProxy = new Renderbuffer(mRenderer, id(), new RenderbufferTexture2D(this, target));
+        return true;
     }
 
-    return mColorbufferProxy;
-}
+    const rx::Image *baseImage = getBaseLevelImage();
 
-rx::RenderTarget *Texture2D::getRenderTarget(GLenum target)
-{
-    ASSERT(target == GL_TEXTURE_2D);
+    GLsizei width = baseImage->getWidth();
+    GLsizei height = baseImage->getHeight();
 
-    // ensure the underlying texture is created
-    if (getStorage(true) == NULL)
+    if (width <= 0 || height <= 0)
     {
-        return NULL;
+        return false;
     }
 
-    updateTexture();
-    
-    // ensure this is NOT a depth texture
-    if (isDepth(0))
+    // The base image level is complete if the width and height are positive
+    if (level == 0)
     {
-        return NULL;
+        return true;
     }
 
-    return mTexStorage->getRenderTarget();
-}
+    ASSERT(level >= 1 && level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getImage(level, 0) != NULL);
+    rx::Image *image = mTexture->getImage(level, 0);
 
-rx::RenderTarget *Texture2D::getDepthStencil(GLenum target)
-{
-    ASSERT(target == GL_TEXTURE_2D);
-
-    // ensure the underlying texture is created
-    if (getStorage(true) == NULL)
+    if (image->getInternalFormat() != baseImage->getInternalFormat())
     {
-        return NULL;
+        return false;
     }
 
-    updateTexture();
-
-    // ensure this is actually a depth texture
-    if (!isDepth(0))
+    if (image->getWidth() != std::max(1, width >> level))
     {
-        return NULL;
+        return false;
     }
-    return mTexStorage->getRenderTarget();
-}
-
-int Texture2D::levelCount()
-{
-    return mTexStorage ? mTexStorage->levelCount() : 0;
-}
 
-rx::TextureStorageInterface *Texture2D::getStorage(bool renderTarget)
-{
-    if (!mTexStorage || (renderTarget && !mTexStorage->isRenderTarget()))
+    if (image->getHeight() != std::max(1, height >> level))
     {
-        if (renderTarget)
-        {
-            convertToRenderTarget();
-        }
-        else
-        {
-            createTexture();
-        }
+        return false;
     }
 
-    return mTexStorage;
+    return true;
 }
 
-TextureCubeMap::TextureCubeMap(rx::Renderer *renderer, GLuint id) : Texture(renderer, id)
+TextureCubeMap::TextureCubeMap(rx::TextureImpl *impl, GLuint id)
+    : Texture(impl, id, GL_TEXTURE_CUBE_MAP)
 {
-    mTexStorage = NULL;
-    for (int i = 0; i < 6; i++)
-    {
-        mFaceProxies[i] = NULL;
-        mFaceProxyRefs[i] = 0;
-
-        for (int j = 0; j < IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++j)
-        {
-            mImageArray[i][j] = renderer->createImage();
-        }
-    }
 }
 
 TextureCubeMap::~TextureCubeMap()
 {
-    for (int i = 0; i < 6; i++)
-    {
-        mFaceProxies[i] = NULL;
-
-        for (int j = 0; j < IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++j)
-        {
-            delete mImageArray[i][j];
-        }
-    }
-
-    delete mTexStorage;
-    mTexStorage = NULL;
-}
-
-// We need to maintain a count of references to renderbuffers acting as 
-// proxies for this texture, so that the texture is not deleted while 
-// proxy references still exist. If the reference count drops to zero,
-// we set our proxy pointer NULL, so that a new attempt at referencing
-// will cause recreation.
-void TextureCubeMap::addProxyRef(const Renderbuffer *proxy)
-{
-    for (int i = 0; i < 6; i++)
-    {
-        if (mFaceProxies[i] == proxy)
-            mFaceProxyRefs[i]++;
-    }
-}
-
-void TextureCubeMap::releaseProxy(const Renderbuffer *proxy)
-{
-    for (int i = 0; i < 6; i++)
-    {
-        if (mFaceProxies[i] == proxy)
-        {
-            if (mFaceProxyRefs[i] > 0)
-                mFaceProxyRefs[i]--;
-
-            if (mFaceProxyRefs[i] == 0)
-                mFaceProxies[i] = NULL;
-        }
-    }
-}
-
-GLenum TextureCubeMap::getTarget() const
-{
-    return GL_TEXTURE_CUBE_MAP;
 }
 
 GLsizei TextureCubeMap::getWidth(GLenum target, GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[faceIndex(target)][level]->getWidth();
+        return mTexture->getImage(level, targetToLayerIndex(target))->getWidth();
     else
         return 0;
 }
@@ -959,7 +446,7 @@ GLsizei TextureCubeMap::getWidth(GLenum target, GLint level) const
 GLsizei TextureCubeMap::getHeight(GLenum target, GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[faceIndex(target)][level]->getHeight();
+        return mTexture->getImage(level, targetToLayerIndex(target))->getHeight();
     else
         return 0;
 }
@@ -967,7 +454,7 @@ GLsizei TextureCubeMap::getHeight(GLenum target, GLint level) const
 GLenum TextureCubeMap::getInternalFormat(GLenum target, GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[faceIndex(target)][level]->getInternalFormat();
+        return mTexture->getImage(level, targetToLayerIndex(target))->getInternalFormat();
     else
         return GL_NONE;
 }
@@ -975,96 +462,120 @@ GLenum TextureCubeMap::getInternalFormat(GLenum target, GLint level) const
 GLenum TextureCubeMap::getActualFormat(GLenum target, GLint level) const
 {
     if (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS)
-        return mImageArray[faceIndex(target)][level]->getActualFormat();
+        return mTexture->getImage(level, targetToLayerIndex(target))->getActualFormat();
     else
-        return D3DFMT_UNKNOWN;
+        return GL_NONE;
 }
 
-void TextureCubeMap::setImagePosX(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void TextureCubeMap::setImagePosX(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    setImage(0, level, width, height, format, type, unpackAlignment, pixels);
+    mTexture->setImage(GL_TEXTURE_CUBE_MAP_POSITIVE_X, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::setImageNegX(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void TextureCubeMap::setImageNegX(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    setImage(1, level, width, height, format, type, unpackAlignment, pixels);
+    mTexture->setImage(GL_TEXTURE_CUBE_MAP_NEGATIVE_X, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::setImagePosY(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void TextureCubeMap::setImagePosY(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    setImage(2, level, width, height, format, type, unpackAlignment, pixels);
+    mTexture->setImage(GL_TEXTURE_CUBE_MAP_POSITIVE_Y, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::setImageNegY(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void TextureCubeMap::setImageNegY(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    setImage(3, level, width, height, format, type, unpackAlignment, pixels);
+    mTexture->setImage(GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::setImagePosZ(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void TextureCubeMap::setImagePosZ(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    setImage(4, level, width, height, format, type, unpackAlignment, pixels);
+    mTexture->setImage(GL_TEXTURE_CUBE_MAP_POSITIVE_Z, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::setImageNegZ(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void TextureCubeMap::setImageNegZ(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    setImage(5, level, width, height, format, type, unpackAlignment, pixels);
+    mTexture->setImage(GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, level, width, height, 1, internalFormat, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::setCompressedImage(GLenum face, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei imageSize, const void *pixels)
+void TextureCubeMap::setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei imageSize, const void *pixels)
 {
-    // compressed formats don't have separate sized internal formats-- we can just use the compressed format directly
-    redefineImage(faceIndex(face), level, format, width, height);
+    mTexture->setCompressedImage(target, level, format, width, height, 1, imageSize, pixels);
+}
 
-    Texture::setCompressedImage(imageSize, pixels, mImageArray[faceIndex(face)][level]);
+void TextureCubeMap::subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
+{
+    mTexture->subImage(target, level, xoffset, yoffset, 0, width, height, 1, format, type, unpack, pixels);
 }
 
-void TextureCubeMap::commitRect(int face, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+void TextureCubeMap::subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels)
 {
-    if (level < levelCount())
-    {
-        rx::Image *image = mImageArray[face][level];
-        if (image->updateSurface(mTexStorage, face, level, xoffset, yoffset, width, height))
-            image->markClean();
-    }
+    mTexture->subImageCompressed(target, level, xoffset, yoffset, 0, width, height, 1, format, imageSize, pixels);
 }
 
-void TextureCubeMap::subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+// Tests for cube texture completeness. [OpenGL ES 2.0.24] section 3.7.10 page 81.
+bool TextureCubeMap::isCubeComplete() const
 {
-    if (Texture::subImage(xoffset, yoffset, width, height, format, type, unpackAlignment, pixels, mImageArray[faceIndex(target)][level]))
+    int    baseWidth  = getBaseLevelWidth();
+    int    baseHeight = getBaseLevelHeight();
+    GLenum baseFormat = getBaseLevelInternalFormat();
+
+    if (baseWidth <= 0 || baseWidth != baseHeight)
     {
-        commitRect(faceIndex(target), level, xoffset, yoffset, width, height);
+        return false;
     }
-}
 
-void TextureCubeMap::subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels)
-{
-    if (Texture::subImageCompressed(xoffset, yoffset, width, height, format, imageSize, pixels, mImageArray[faceIndex(target)][level]))
+    for (int faceIndex = 1; faceIndex < 6; faceIndex++)
     {
-        commitRect(faceIndex(target), level, xoffset, yoffset, width, height);
+        const rx::Image *faceBaseImage = mTexture->getImage(0, faceIndex);
+
+        if (faceBaseImage->getWidth()          != baseWidth  ||
+            faceBaseImage->getHeight()         != baseHeight ||
+            faceBaseImage->getInternalFormat() != baseFormat )
+        {
+            return false;
+        }
     }
+
+    return true;
+}
+
+bool TextureCubeMap::isCompressed(GLenum target, GLint level) const
+{
+    return GetInternalFormatInfo(getInternalFormat(target, level)).compressed;
 }
 
-// Tests for cube map sampling completeness. [OpenGL ES 2.0.24] section 3.8.2 page 86.
-bool TextureCubeMap::isSamplerComplete() const
+bool TextureCubeMap::isDepth(GLenum target, GLint level) const
+{
+    return GetInternalFormatInfo(getInternalFormat(target, level)).depthBits > 0;
+}
+
+void TextureCubeMap::copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source)
 {
-    int size = mImageArray[0][0]->getWidth();
+    mTexture->copyImage(target, level, format, x, y, width, height, source);
+}
 
-    bool mipmapping = isMipmapFiltered();
-    bool filtering, renderable;
+void TextureCubeMap::storage(GLsizei levels, GLenum internalformat, GLsizei size)
+{
+    mImmutable = true;
 
-    if ((gl::ExtractType(getInternalFormat(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0)) == GL_FLOAT && !mRenderer->getFloat32TextureSupport(&filtering, &renderable)) ||
-        (gl::ExtractType(getInternalFormat(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0) == GL_HALF_FLOAT_OES) && !mRenderer->getFloat16TextureSupport(&filtering, &renderable)))
+    mTexture->storage(GL_TEXTURE_CUBE_MAP, levels, internalformat, size, size, 1);
+}
+
+// Tests for texture sampling completeness
+bool TextureCubeMap::isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const
+{
+    int size = getBaseLevelWidth();
+
+    bool mipmapping = IsMipmapFiltered(samplerState);
+
+    if (!textureCaps.get(getInternalFormat(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0)).filterable && !IsPointSampled(samplerState))
     {
-        if (mSamplerState.magFilter != GL_NEAREST ||
-            (mSamplerState.minFilter != GL_NEAREST && mSamplerState.minFilter != GL_NEAREST_MIPMAP_NEAREST))
-        {
-            return false;
-        }
+        return false;
     }
 
-    if (!isPow2(size) && !mRenderer->getNonPower2TextureSupport())
+    if (!gl::isPow2(size) && !extensions.textureNPOT)
     {
-        if (mSamplerState.wrapS != GL_CLAMP_TO_EDGE || mSamplerState.wrapT != GL_CLAMP_TO_EDGE || mipmapping)
+        if (samplerState.wrapS != GL_CLAMP_TO_EDGE || samplerState.wrapT != GL_CLAMP_TO_EDGE || mipmapping)
         {
             return false;
         }
@@ -1079,7 +590,7 @@ bool TextureCubeMap::isSamplerComplete() const
     }
     else
     {
-        if (!isMipmapCubeComplete())   // Also tests for isCubeComplete()
+        if (!isMipmapComplete())   // Also tests for isCubeComplete()
         {
             return false;
         }
@@ -1088,28 +599,29 @@ bool TextureCubeMap::isSamplerComplete() const
     return true;
 }
 
-// Tests for cube texture completeness. [OpenGL ES 2.0.24] section 3.7.10 page 81.
-bool TextureCubeMap::isCubeComplete() const
+int TextureCubeMap::targetToLayerIndex(GLenum target)
 {
-    if (mImageArray[0][0]->getWidth() <= 0 || mImageArray[0][0]->getHeight() != mImageArray[0][0]->getWidth())
-    {
-        return false;
-    }
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_X - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 1);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_POSITIVE_Y - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 2);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_Y - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 3);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_POSITIVE_Z - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 4);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_Z - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 5);
 
-    for (unsigned int face = 1; face < 6; face++)
-    {
-        if (mImageArray[face][0]->getWidth() != mImageArray[0][0]->getWidth() ||
-            mImageArray[face][0]->getWidth() != mImageArray[0][0]->getHeight() ||
-            mImageArray[face][0]->getInternalFormat() != mImageArray[0][0]->getInternalFormat())
-        {
-            return false;
-        }
-    }
+    return target - GL_TEXTURE_CUBE_MAP_POSITIVE_X;
+}
 
-    return true;
+GLenum TextureCubeMap::layerIndexToTarget(GLint layer)
+{
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_X - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 1);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_POSITIVE_Y - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 2);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_Y - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 3);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_POSITIVE_Z - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 4);
+    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_Z - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 5);
+
+    return GL_TEXTURE_CUBE_MAP_POSITIVE_X + layer;
 }
 
-bool TextureCubeMap::isMipmapCubeComplete() const
+bool TextureCubeMap::isMipmapComplete() const
 {
     if (isImmutable())
     {
@@ -1121,20 +633,13 @@ bool TextureCubeMap::isMipmapCubeComplete() const
         return false;
     }
 
-    GLsizei size = mImageArray[0][0]->getWidth();
-
-    int q = log2(size);
+    int levelCount = mipLevels();
 
     for (int face = 0; face < 6; face++)
     {
-        for (int level = 1; level <= q; level++)
+        for (int level = 1; level < levelCount; level++)
         {
-            if (mImageArray[face][level]->getInternalFormat() != mImageArray[0][0]->getInternalFormat())
-            {
-                return false;
-            }
-
-            if (mImageArray[face][level]->getWidth() != std::max(1, size >> level))
+            if (!isFaceLevelComplete(face, level))
             {
                 return false;
             }
@@ -1144,356 +649,359 @@ bool TextureCubeMap::isMipmapCubeComplete() const
     return true;
 }
 
-bool TextureCubeMap::isCompressed(GLenum target, GLint level) const
+bool TextureCubeMap::isFaceLevelComplete(int faceIndex, int level) const
 {
-    return IsCompressed(getInternalFormat(target, level));
-}
+    ASSERT(level >= 0 && faceIndex < 6 && level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getImage(level, faceIndex) != NULL);
 
-// Constructs a native texture resource from the texture images, or returns an existing one
-void TextureCubeMap::createTexture()
-{
-    GLsizei size = mImageArray[0][0]->getWidth();
+    if (isImmutable())
+    {
+        return true;
+    }
+
+    int baseSize = getBaseLevelWidth();
 
-    if (!(size > 0))
-        return; // do not attempt to create native textures for nonexistant data
+    if (baseSize <= 0)
+    {
+        return false;
+    }
 
-    GLint levels = creationLevels(size);
-    GLenum internalformat = mImageArray[0][0]->getInternalFormat();
+    // "isCubeComplete" checks for base level completeness and we must call that
+    // to determine if any face at level 0 is complete. We omit that check here
+    // to avoid re-checking cube-completeness for every face at level 0.
+    if (level == 0)
+    {
+        return true;
+    }
 
-    delete mTexStorage;
-    mTexStorage = new rx::TextureStorageInterfaceCube(mRenderer, levels, internalformat, mUsage, false, size);
+    // Check that non-zero levels are consistent with the base level.
+    const rx::Image *faceLevelImage = mTexture->getImage(level, faceIndex);
 
-    if (mTexStorage->isManaged())
+    if (faceLevelImage->getInternalFormat() != getBaseLevelInternalFormat())
     {
-        int levels = levelCount();
+        return false;
+    }
 
-        for (int face = 0; face < 6; face++)
-        {
-            for (int level = 0; level < levels; level++)
-            {
-                mImageArray[face][level]->setManagedSurface(mTexStorage, face, level);
-            }
-        }
+    if (faceLevelImage->getWidth() != std::max(1, baseSize >> level))
+    {
+        return false;
     }
 
-    mDirtyImages = true;
+    return true;
 }
 
-void TextureCubeMap::updateTexture()
-{
-    bool mipmapping = isMipmapFiltered() && isMipmapCubeComplete();
 
-    for (int face = 0; face < 6; face++)
-    {
-        int levels = (mipmapping ? levelCount() : 1);
+Texture3D::Texture3D(rx::TextureImpl *impl, GLuint id)
+    : Texture(impl, id, GL_TEXTURE_3D)
+{
+}
 
-        for (int level = 0; level < levels; level++)
-        {
-            rx::Image *image = mImageArray[face][level];
+Texture3D::~Texture3D()
+{
+}
 
-            if (image->isDirty())
-            {
-                commitRect(face, level, 0, 0, image->getWidth(), image->getHeight());
-            }
-        }
-    }
+GLsizei Texture3D::getWidth(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mTexture->getImage(level, 0)->getWidth() : 0;
 }
 
-void TextureCubeMap::convertToRenderTarget()
+GLsizei Texture3D::getHeight(GLint level) const
 {
-    rx::TextureStorageInterfaceCube *newTexStorage = NULL;
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mTexture->getImage(level, 0)->getHeight() : 0;
+}
 
-    if (mImageArray[0][0]->getWidth() != 0)
-    {
-        GLsizei size = mImageArray[0][0]->getWidth();
-        GLint levels = mTexStorage != NULL ? mTexStorage->levelCount() : creationLevels(size);
-        GLenum internalformat = mImageArray[0][0]->getInternalFormat();
+GLsizei Texture3D::getDepth(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mTexture->getImage(level, 0)->getDepth() : 0;
+}
 
-        newTexStorage = new rx::TextureStorageInterfaceCube(mRenderer, levels, internalformat, GL_FRAMEBUFFER_ATTACHMENT_ANGLE, true, size);
+GLenum Texture3D::getInternalFormat(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mTexture->getImage(level, 0)->getInternalFormat() : GL_NONE;
+}
 
-        if (mTexStorage != NULL)
-        {
-            if (!mRenderer->copyToRenderTarget(newTexStorage, mTexStorage))
-            {
-                delete newTexStorage;
-                return gl::error(GL_OUT_OF_MEMORY);
-            }
-        }
-    }
+GLenum Texture3D::getActualFormat(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mTexture->getImage(level, 0)->getActualFormat() : GL_NONE;
+}
 
-    delete mTexStorage;
-    mTexStorage = newTexStorage;
+bool Texture3D::isCompressed(GLint level) const
+{
+    return GetInternalFormatInfo(getInternalFormat(level)).compressed;
+}
 
-    mDirtyImages = true;
+bool Texture3D::isDepth(GLint level) const
+{
+    return GetInternalFormatInfo(getInternalFormat(level)).depthBits > 0;
 }
 
-void TextureCubeMap::setImage(int faceIndex, GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels)
+void Texture3D::setImage(GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    GLint internalformat = ConvertSizedInternalFormat(format, type);
-    redefineImage(faceIndex, level, internalformat, width, height);
+    mTexture->setImage(GL_TEXTURE_3D, level, width, height, depth, internalFormat, format, type, unpack, pixels);
+}
 
-    Texture::setImage(unpackAlignment, pixels, mImageArray[faceIndex][level]);
+void Texture3D::setCompressedImage(GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels)
+{
+    mTexture->setCompressedImage(GL_TEXTURE_3D, level, format, width, height, depth, imageSize, pixels);
 }
 
-unsigned int TextureCubeMap::faceIndex(GLenum face)
+void Texture3D::subImage(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
 {
-    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_X - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 1);
-    META_ASSERT(GL_TEXTURE_CUBE_MAP_POSITIVE_Y - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 2);
-    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_Y - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 3);
-    META_ASSERT(GL_TEXTURE_CUBE_MAP_POSITIVE_Z - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 4);
-    META_ASSERT(GL_TEXTURE_CUBE_MAP_NEGATIVE_Z - GL_TEXTURE_CUBE_MAP_POSITIVE_X == 5);
+    mTexture->subImage(GL_TEXTURE_3D, level, xoffset, yoffset, zoffset, width, height, depth, format, type, unpack, pixels);
+}
 
-    return face - GL_TEXTURE_CUBE_MAP_POSITIVE_X;
+void Texture3D::subImageCompressed(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels)
+{
+    mTexture->subImageCompressed(GL_TEXTURE_3D, level, xoffset, yoffset, zoffset, width, height, depth, format, imageSize, pixels);
 }
 
-void TextureCubeMap::redefineImage(int face, GLint level, GLint internalformat, GLsizei width, GLsizei height)
+void Texture3D::storage(GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
 {
-    // If there currently is a corresponding storage texture image, it has these parameters
-    const int storageWidth = std::max(1, mImageArray[0][0]->getWidth() >> level);
-    const int storageHeight = std::max(1, mImageArray[0][0]->getHeight() >> level);
-    const int storageFormat = mImageArray[0][0]->getInternalFormat();
+    mImmutable = true;
 
-    mImageArray[face][level]->redefine(mRenderer, internalformat, width, height, false);
+    mTexture->storage(GL_TEXTURE_3D, levels, internalformat, width, height, depth);
+}
+
+bool Texture3D::isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const
+{
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei depth = getBaseLevelDepth();
 
-    if (mTexStorage)
+    if (width <= 0 || height <= 0 || depth <= 0)
     {
-        const int storageLevels = mTexStorage->levelCount();
-        
-        if ((level >= storageLevels && storageLevels != 0) ||
-            width != storageWidth ||
-            height != storageHeight ||
-            internalformat != storageFormat)   // Discard mismatched storage
-        {
-            for (int i = 0; i < IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-            {
-                for (int f = 0; f < 6; f++)
-                {
-                    mImageArray[f][i]->markDirty();
-                }
-            }
+        return false;
+    }
 
-            delete mTexStorage;
-            mTexStorage = NULL;
+    if (!textureCaps.get(getInternalFormat(0)).filterable && !IsPointSampled(samplerState))
+    {
+        return false;
+    }
 
-            mDirtyImages = true;
-        }
+    if (IsMipmapFiltered(samplerState) && !isMipmapComplete())
+    {
+        return false;
     }
+
+    return true;
 }
 
-void TextureCubeMap::copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source)
+bool Texture3D::isMipmapComplete() const
 {
-    unsigned int faceindex = faceIndex(target);
-    GLint internalformat = gl::ConvertSizedInternalFormat(format, GL_UNSIGNED_BYTE);
-    redefineImage(faceindex, level, internalformat, width, height);
+    int levelCount = mipLevels();
 
-    if (!mImageArray[faceindex][level]->isRenderableFormat())
+    for (int level = 0; level < levelCount; level++)
     {
-        mImageArray[faceindex][level]->copy(0, 0, x, y, width, height, source);
-        mDirtyImages = true;
-    }
-    else
-    {
-        if (!mTexStorage || !mTexStorage->isRenderTarget())
-        {
-            convertToRenderTarget();
-        }
-        
-        mImageArray[faceindex][level]->markClean();
-
-        ASSERT(width == height);
-
-        if (width > 0 && level < levelCount())
+        if (!isLevelComplete(level))
         {
-            gl::Rectangle sourceRect;
-            sourceRect.x = x;
-            sourceRect.width = width;
-            sourceRect.y = y;
-            sourceRect.height = height;
-
-            mRenderer->copyImage(source, sourceRect, format, 0, 0, mTexStorage, target, level);
+            return false;
         }
     }
+
+    return true;
 }
 
-void TextureCubeMap::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source)
+bool Texture3D::isLevelComplete(int level) const
 {
-    GLsizei size = mImageArray[faceIndex(target)][level]->getWidth();
+    ASSERT(level >= 0 && level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getImage(level, 0) != NULL);
 
-    if (xoffset + width > size || yoffset + height > size)
+    if (isImmutable())
     {
-        return gl::error(GL_INVALID_VALUE);
+        return true;
     }
 
-    unsigned int faceindex = faceIndex(target);
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei depth = getBaseLevelDepth();
 
-    if (!mImageArray[faceindex][level]->isRenderableFormat() || (!mTexStorage && !isSamplerComplete()))
+    if (width <= 0 || height <= 0 || depth <= 0)
     {
-        mImageArray[faceindex][level]->copy(0, 0, x, y, width, height, source);
-        mDirtyImages = true;
+        return false;
     }
-    else
-    {
-        if (!mTexStorage || !mTexStorage->isRenderTarget())
-        {
-            convertToRenderTarget();
-        }
-        
-        updateTexture();
 
-        if (level < levelCount())
-        {
-            gl::Rectangle sourceRect;
-            sourceRect.x = x;
-            sourceRect.width = width;
-            sourceRect.y = y;
-            sourceRect.height = height;
-
-            mRenderer->copyImage(source, sourceRect, gl::ExtractFormat(mImageArray[0][0]->getInternalFormat()), 
-                                 xoffset, yoffset, mTexStorage, target, level);
-        }
+    if (level == 0)
+    {
+        return true;
     }
-}
 
-void TextureCubeMap::storage(GLsizei levels, GLenum internalformat, GLsizei size)
-{
-    delete mTexStorage;
-    mTexStorage = new rx::TextureStorageInterfaceCube(mRenderer, levels, internalformat, mUsage, false, size);
-    mImmutable = true;
+    rx::Image *levelImage = mTexture->getImage(level, 0);
 
-    for (int level = 0; level < levels; level++)
+    if (levelImage->getInternalFormat() != getBaseLevelInternalFormat())
     {
-        GLsizei mipSize = std::max(1, size >> level);
-        for (int face = 0; face < 6; face++)
-        {
-            mImageArray[face][level]->redefine(mRenderer, internalformat, mipSize, mipSize, true);
-        }
+        return false;
     }
 
-    for (int level = levels; level < IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    if (levelImage->getWidth() != std::max(1, width >> level))
     {
-        for (int face = 0; face < 6; face++)
-        {
-            mImageArray[face][level]->redefine(mRenderer, GL_NONE, 0, 0, true);
-        }
+        return false;
     }
 
-    if (mTexStorage->isManaged())
+    if (levelImage->getHeight() != std::max(1, height >> level))
     {
-        int levels = levelCount();
+        return false;
+    }
 
-        for (int face = 0; face < 6; face++)
-        {
-            for (int level = 0; level < levels; level++)
-            {
-                mImageArray[face][level]->setManagedSurface(mTexStorage, face, level);
-            }
-        }
+    if (levelImage->getDepth() != std::max(1, depth >> level))
+    {
+        return false;
     }
+
+    return true;
 }
 
-void TextureCubeMap::generateMipmaps()
+Texture2DArray::Texture2DArray(rx::TextureImpl *impl, GLuint id)
+    : Texture(impl, id, GL_TEXTURE_2D_ARRAY)
 {
-    if (!isCubeComplete())
+}
+
+Texture2DArray::~Texture2DArray()
+{
+}
+
+GLsizei Texture2DArray::getWidth(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getLayerCount(level) > 0) ? mTexture->getImage(level, 0)->getWidth() : 0;
+}
+
+GLsizei Texture2DArray::getHeight(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getLayerCount(level) > 0) ? mTexture->getImage(level, 0)->getHeight() : 0;
+}
+
+GLsizei Texture2DArray::getLayers(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mTexture->getLayerCount(level) : 0;
+}
+
+GLenum Texture2DArray::getInternalFormat(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getLayerCount(level) > 0) ? mTexture->getImage(level, 0)->getInternalFormat() : GL_NONE;
+}
+
+GLenum Texture2DArray::getActualFormat(GLint level) const
+{
+    return (level < IMPLEMENTATION_MAX_TEXTURE_LEVELS && mTexture->getLayerCount(level) > 0) ? mTexture->getImage(level, 0)->getActualFormat() : GL_NONE;
+}
+
+bool Texture2DArray::isCompressed(GLint level) const
+{
+    return GetInternalFormatInfo(getInternalFormat(level)).compressed;
+}
+
+bool Texture2DArray::isDepth(GLint level) const
+{
+    return GetInternalFormatInfo(getInternalFormat(level)).depthBits > 0;
+}
+
+void Texture2DArray::setImage(GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
+{
+    mTexture->setImage(GL_TEXTURE_2D_ARRAY, level, width, height, depth, internalFormat, format, type, unpack, pixels);
+}
+
+void Texture2DArray::setCompressedImage(GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels)
+{
+    mTexture->setCompressedImage(GL_TEXTURE_2D_ARRAY, level, format, width, height, depth, imageSize, pixels);
+}
+
+void Texture2DArray::subImage(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels)
+{
+    mTexture->subImage(GL_TEXTURE_2D_ARRAY, level, xoffset, yoffset, zoffset, width, height, depth, format, type, unpack, pixels);
+}
+
+void Texture2DArray::subImageCompressed(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels)
+{
+    mTexture->subImageCompressed(GL_TEXTURE_2D_ARRAY, level, xoffset, yoffset, zoffset, width, height, depth, format, imageSize, pixels);
+}
+
+void Texture2DArray::storage(GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    mImmutable = true;
+
+    mTexture->storage(GL_TEXTURE_2D_ARRAY, levels, internalformat, width, height, depth);
+}
+
+bool Texture2DArray::isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const
+{
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei depth = getLayers(0);
+
+    if (width <= 0 || height <= 0 || depth <= 0)
     {
-        return gl::error(GL_INVALID_OPERATION);
+        return false;
     }
 
-    if (!mRenderer->getNonPower2TextureSupport())
+    if (!textureCaps.get(getBaseLevelInternalFormat()).filterable && !IsPointSampled(samplerState))
     {
-        if (!isPow2(mImageArray[0][0]->getWidth()))
-        {
-            return gl::error(GL_INVALID_OPERATION);
-        }
+        return false;
     }
 
-    // Purge array levels 1 through q and reset them to represent the generated mipmap levels.
-    unsigned int q = log2(mImageArray[0][0]->getWidth());
-    for (unsigned int f = 0; f < 6; f++)
+    if (IsMipmapFiltered(samplerState) && !isMipmapComplete())
     {
-        for (unsigned int i = 1; i <= q; i++)
-        {
-            redefineImage(f, i, mImageArray[f][0]->getInternalFormat(),
-                          std::max(mImageArray[f][0]->getWidth() >> i, 1),
-                          std::max(mImageArray[f][0]->getWidth() >> i, 1));
-        }
+        return false;
     }
 
-    if (mTexStorage && mTexStorage->isRenderTarget())
-    {
-        for (unsigned int f = 0; f < 6; f++)
-        {
-            for (unsigned int i = 1; i <= q; i++)
-            {
-                mTexStorage->generateMipmap(f, i);
+    return true;
+}
 
-                mImageArray[f][i]->markClean();
-            }
-        }
-    }
-    else
+bool Texture2DArray::isMipmapComplete() const
+{
+    int levelCount = mipLevels();
+
+    for (int level = 1; level < levelCount; level++)
     {
-        for (unsigned int f = 0; f < 6; f++)
+        if (!isLevelComplete(level))
         {
-            for (unsigned int i = 1; i <= q; i++)
-            {
-                mRenderer->generateMipmap(mImageArray[f][i], mImageArray[f][i - 1]);
-            }
+            return false;
         }
     }
+
+    return true;
 }
 
-Renderbuffer *TextureCubeMap::getRenderbuffer(GLenum target)
+bool Texture2DArray::isLevelComplete(int level) const
 {
-    if (!IsCubemapTextureTarget(target))
+    ASSERT(level >= 0 && level < IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+
+    if (isImmutable())
     {
-        return gl::error(GL_INVALID_OPERATION, (Renderbuffer *)NULL);
+        return true;
     }
 
-    unsigned int face = faceIndex(target);
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei layers = getLayers(0);
 
-    if (mFaceProxies[face] == NULL)
+    if (width <= 0 || height <= 0 || layers <= 0)
     {
-        mFaceProxies[face] = new Renderbuffer(mRenderer, id(), new RenderbufferTextureCubeMap(this, target));
+        return false;
     }
 
-    return mFaceProxies[face];
-}
-
-rx::RenderTarget *TextureCubeMap::getRenderTarget(GLenum target)
-{
-    ASSERT(IsCubemapTextureTarget(target));
+    if (level == 0)
+    {
+        return true;
+    }
 
-    // ensure the underlying texture is created
-    if (getStorage(true) == NULL)
+    if (getInternalFormat(level) != getInternalFormat(0))
     {
-        return NULL;
+        return false;
     }
 
-    updateTexture();
-    
-    return mTexStorage->getRenderTarget(target);
-}
+    if (getWidth(level) != std::max(1, width >> level))
+    {
+        return false;
+    }
 
-int TextureCubeMap::levelCount()
-{
-    return mTexStorage ? mTexStorage->levelCount() - getLodOffset() : 0;
-}
+    if (getHeight(level) != std::max(1, height >> level))
+    {
+        return false;
+    }
 
-rx::TextureStorageInterface *TextureCubeMap::getStorage(bool renderTarget)
-{
-    if (!mTexStorage || (renderTarget && !mTexStorage->isRenderTarget()))
+    if (getLayers(level) != layers)
     {
-        if (renderTarget)
-        {
-            convertToRenderTarget();
-        }
-        else
-        {
-            createTexture();
-        }
+        return false;
     }
 
-    return mTexStorage;
+    return true;
 }
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Texture.h b/src/3rdparty/angle/src/libGLESv2/Texture.h
index 4f5fab28d0..ca5686fde3 100644
--- a/src/3rdparty/angle/src/libGLESv2/Texture.h
+++ b/src/3rdparty/angle/src/libGLESv2/Texture.h
@@ -11,14 +11,16 @@
 #ifndef LIBGLESV2_TEXTURE_H_
 #define LIBGLESV2_TEXTURE_H_
 
-#include <vector>
-
-#define GL_APICALL
-#include <GLES2/gl2.h>
-
 #include "common/debug.h"
 #include "common/RefCountObject.h"
 #include "libGLESv2/angletypes.h"
+#include "libGLESv2/constants.h"
+#include "libGLESv2/renderer/TextureImpl.h"
+#include "libGLESv2/Caps.h"
+
+#include "angle_gl.h"
+
+#include <vector>
 
 namespace egl
 {
@@ -27,119 +29,85 @@ class Surface;
 
 namespace rx
 {
-class Renderer;
 class TextureStorageInterface;
-class TextureStorageInterface2D;
-class TextureStorageInterfaceCube;
-class RenderTarget;
 class Image;
 }
 
 namespace gl
 {
 class Framebuffer;
-class Renderbuffer;
-
-enum
-{
-    // These are the maximums the implementation can support
-    // The actual GL caps are limited by the device caps
-    // and should be queried from the Context
-    IMPLEMENTATION_MAX_TEXTURE_SIZE = 16384,
-    IMPLEMENTATION_MAX_CUBE_MAP_TEXTURE_SIZE = 16384,
+class FramebufferAttachment;
+struct ImageIndex;
 
-    IMPLEMENTATION_MAX_TEXTURE_LEVELS = 15   // 1+log2 of MAX_TEXTURE_SIZE
-};
+bool IsMipmapFiltered(const gl::SamplerState &samplerState);
 
 class Texture : public RefCountObject
 {
   public:
-    Texture(rx::Renderer *renderer, GLuint id);
+    Texture(rx::TextureImpl *impl, GLuint id, GLenum target);
 
     virtual ~Texture();
 
-    virtual void addProxyRef(const Renderbuffer *proxy) = 0;
-    virtual void releaseProxy(const Renderbuffer *proxy) = 0;
-
-    virtual GLenum getTarget() const = 0;
-
-    bool setMinFilter(GLenum filter);
-    bool setMagFilter(GLenum filter);
-    bool setWrapS(GLenum wrap);
-    bool setWrapT(GLenum wrap);
-    bool setMaxAnisotropy(float textureMaxAnisotropy, float contextMaxAnisotropy);
-    bool setUsage(GLenum usage);
-
-    GLenum getMinFilter() const;
-    GLenum getMagFilter() const;
-    GLenum getWrapS() const;
-    GLenum getWrapT() const;
-    float getMaxAnisotropy() const;
-    int getLodOffset();
-    void getSamplerState(SamplerState *sampler);
+    GLenum getTarget() const;
+
+    const SamplerState &getSamplerState() const { return mSamplerState; }
+    SamplerState &getSamplerState() { return mSamplerState; }
+    void getSamplerStateWithNativeOffset(SamplerState *sampler);
+
+    void setUsage(GLenum usage);
     GLenum getUsage() const;
-    bool isMipmapFiltered() const;
 
-    virtual bool isSamplerComplete() const = 0;
+    GLint getBaseLevelWidth() const;
+    GLint getBaseLevelHeight() const;
+    GLint getBaseLevelDepth() const;
+    GLenum getBaseLevelInternalFormat() const;
+
+    GLsizei getWidth(const ImageIndex &index) const;
+    GLsizei getHeight(const ImageIndex &index) const;
+    GLenum getInternalFormat(const ImageIndex &index) const;
+    GLenum getActualFormat(const ImageIndex &index) const;
 
-    rx::TextureStorageInterface *getNativeTexture();
-    virtual Renderbuffer *getRenderbuffer(GLenum target) = 0;
+    virtual bool isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const = 0;
 
-    virtual void generateMipmaps() = 0;
-    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source) = 0;
+    rx::TextureStorage *getNativeTexture();
+
+    virtual void generateMipmaps();
+    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source);
 
-    bool hasDirtyParameters() const;
-    bool hasDirtyImages() const;
-    void resetDirty();
     unsigned int getTextureSerial();
-    unsigned int getRenderTargetSerial(GLenum target);
 
     bool isImmutable() const;
+    int immutableLevelCount();
+
+    rx::TextureImpl *getImplementation() { return mTexture; }
+    const rx::TextureImpl *getImplementation() const { return mTexture; }
 
     static const GLuint INCOMPLETE_TEXTURE_ID = static_cast<GLuint>(-1);   // Every texture takes an id at creation time. The value is arbitrary because it is never registered with the resource manager.
 
   protected:
-    void setImage(GLint unpackAlignment, const void *pixels, rx::Image *image);
-    bool subImage(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels, rx::Image *image);
-    void setCompressedImage(GLsizei imageSize, const void *pixels, rx::Image *image);
-    bool subImageCompressed(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels, rx::Image *image);
-
-    GLint creationLevels(GLsizei width, GLsizei height) const;
-    GLint creationLevels(GLsizei size) const;
-
-    virtual void createTexture() = 0;
-    virtual void updateTexture() = 0;
-    virtual void convertToRenderTarget() = 0;
-    virtual rx::RenderTarget *getRenderTarget(GLenum target) = 0;
-
-    virtual int levelCount() = 0;
+    int mipLevels() const;
 
-    rx::Renderer *mRenderer;
+    rx::TextureImpl *mTexture;
 
     SamplerState mSamplerState;
     GLenum mUsage;
 
-    bool mDirtyImages;
-
     bool mImmutable;
 
+    GLenum mTarget;
+
+    const rx::Image *getBaseLevelImage() const;
+
   private:
     DISALLOW_COPY_AND_ASSIGN(Texture);
-
-    virtual rx::TextureStorageInterface *getStorage(bool renderTarget) = 0;
 };
 
 class Texture2D : public Texture
 {
   public:
-    Texture2D(rx::Renderer *renderer, GLuint id);
-
-    ~Texture2D();
+    Texture2D(rx::TextureImpl *impl, GLuint id);
 
-    void addProxyRef(const Renderbuffer *proxy);
-    void releaseProxy(const Renderbuffer *proxy);
-
-    virtual GLenum getTarget() const;
+    virtual ~Texture2D();
 
     GLsizei getWidth(GLint level) const;
     GLsizei getHeight(GLint level) const;
@@ -148,128 +116,130 @@ class Texture2D : public Texture
     bool isCompressed(GLint level) const;
     bool isDepth(GLint level) const;
 
-    void setImage(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
+    void setImage(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
     void setCompressedImage(GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei imageSize, const void *pixels);
-    void subImage(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
+    void subImage(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
     void subImageCompressed(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels);
     void copyImage(GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source);
-    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source);
     void storage(GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
 
-    virtual bool isSamplerComplete() const;
+    virtual bool isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const;
     virtual void bindTexImage(egl::Surface *surface);
     virtual void releaseTexImage();
 
     virtual void generateMipmaps();
 
-    virtual Renderbuffer *getRenderbuffer(GLenum target);
-
-  protected:
-    friend class RenderbufferTexture2D;
-    virtual rx::RenderTarget *getRenderTarget(GLenum target);
-    virtual rx::RenderTarget *getDepthStencil(GLenum target);
-    virtual int levelCount();
-
   private:
     DISALLOW_COPY_AND_ASSIGN(Texture2D);
 
-    virtual void createTexture();
-    virtual void updateTexture();
-    virtual void convertToRenderTarget();
-    virtual rx::TextureStorageInterface *getStorage(bool renderTarget);
-
     bool isMipmapComplete() const;
+    bool isLevelComplete(int level) const;
 
-    void redefineImage(GLint level, GLint internalformat, GLsizei width, GLsizei height);
-    void commitRect(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-
-    rx::Image *mImageArray[IMPLEMENTATION_MAX_TEXTURE_LEVELS];
-
-    rx::TextureStorageInterface2D *mTexStorage;
     egl::Surface *mSurface;
-
-    // A specific internal reference count is kept for colorbuffer proxy references,
-    // because, as the renderbuffer acting as proxy will maintain a binding pointer
-    // back to this texture, there would be a circular reference if we used a binding
-    // pointer here. This reference count will cause the pointer to be set to NULL if
-    // the count drops to zero, but will not cause deletion of the Renderbuffer.
-    Renderbuffer *mColorbufferProxy;
-    unsigned int mProxyRefs;
 };
 
 class TextureCubeMap : public Texture
 {
   public:
-    TextureCubeMap(rx::Renderer *renderer, GLuint id);
+    TextureCubeMap(rx::TextureImpl *impl, GLuint id);
 
-    ~TextureCubeMap();
+    virtual ~TextureCubeMap();
 
-    void addProxyRef(const Renderbuffer *proxy);
-    void releaseProxy(const Renderbuffer *proxy);
-
-    virtual GLenum getTarget() const;
-    
     GLsizei getWidth(GLenum target, GLint level) const;
     GLsizei getHeight(GLenum target, GLint level) const;
     GLenum getInternalFormat(GLenum target, GLint level) const;
     GLenum getActualFormat(GLenum target, GLint level) const;
     bool isCompressed(GLenum target, GLint level) const;
+    bool isDepth(GLenum target, GLint level) const;
 
-    void setImagePosX(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
-    void setImageNegX(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
-    void setImagePosY(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
-    void setImageNegY(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
-    void setImagePosZ(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
-    void setImageNegZ(GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
+    void setImagePosX(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setImageNegX(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setImagePosY(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setImageNegY(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setImagePosZ(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setImageNegZ(GLint level, GLsizei width, GLsizei height, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
 
-    void setCompressedImage(GLenum face, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei imageSize, const void *pixels);
+    void setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei imageSize, const void *pixels);
 
-    void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
+    void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
     void subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *pixels);
     void copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source);
-    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, Framebuffer *source);
     void storage(GLsizei levels, GLenum internalformat, GLsizei size);
 
-    virtual bool isSamplerComplete() const;
+    virtual bool isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const;
 
-    virtual void generateMipmaps();
+    bool isCubeComplete() const;
 
-    virtual Renderbuffer *getRenderbuffer(GLenum target);
+    static int targetToLayerIndex(GLenum target);
+    static GLenum layerIndexToTarget(GLint layer);
 
-    static unsigned int faceIndex(GLenum face);
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureCubeMap);
 
-  protected:
-    friend class RenderbufferTextureCubeMap;
-    virtual rx::RenderTarget *getRenderTarget(GLenum target);
-    virtual int levelCount();
+    bool isMipmapComplete() const;
+    bool isFaceLevelComplete(int faceIndex, int level) const;
+};
+
+class Texture3D : public Texture
+{
+  public:
+    Texture3D(rx::TextureImpl *impl, GLuint id);
+
+    virtual ~Texture3D();
+
+    GLsizei getWidth(GLint level) const;
+    GLsizei getHeight(GLint level) const;
+    GLsizei getDepth(GLint level) const;
+    GLenum getInternalFormat(GLint level) const;
+    GLenum getActualFormat(GLint level) const;
+    bool isCompressed(GLint level) const;
+    bool isDepth(GLint level) const;
+
+    void setImage(GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setCompressedImage(GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels);
+    void subImage(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void subImageCompressed(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels);
+    void storage(GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+
+    virtual bool isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const;
 
   private:
-    DISALLOW_COPY_AND_ASSIGN(TextureCubeMap);
+    DISALLOW_COPY_AND_ASSIGN(Texture3D);
 
-    virtual void createTexture();
-    virtual void updateTexture();
-    virtual void convertToRenderTarget();
-    virtual rx::TextureStorageInterface *getStorage(bool renderTarget);
+    bool isMipmapComplete() const;
+    bool isLevelComplete(int level) const;
+};
 
-    bool isCubeComplete() const;
-    bool isMipmapCubeComplete() const;
+class Texture2DArray : public Texture
+{
+  public:
+    Texture2DArray(rx::TextureImpl *impl, GLuint id);
 
-    void setImage(int faceIndex, GLint level, GLsizei width, GLsizei height, GLenum format, GLenum type, GLint unpackAlignment, const void *pixels);
-    void commitRect(int faceIndex, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-    void redefineImage(int faceIndex, GLint level, GLint internalformat, GLsizei width, GLsizei height);
+    virtual ~Texture2DArray();
 
-    rx::Image *mImageArray[6][IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+    GLsizei getWidth(GLint level) const;
+    GLsizei getHeight(GLint level) const;
+    GLsizei getLayers(GLint level) const;
+    GLenum getInternalFormat(GLint level) const;
+    GLenum getActualFormat(GLint level) const;
+    bool isCompressed(GLint level) const;
+    bool isDepth(GLint level) const;
+
+    void setImage(GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void setCompressedImage(GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels);
+    void subImage(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const PixelUnpackState &unpack, const void *pixels);
+    void subImageCompressed(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels);
+    void storage(GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
 
-    rx::TextureStorageInterfaceCube *mTexStorage;
+    virtual bool isSamplerComplete(const SamplerState &samplerState, const TextureCapsMap &textureCaps, const Extensions &extensions, int clientVersion) const;
 
-    // A specific internal reference count is kept for colorbuffer proxy references,
-    // because, as the renderbuffer acting as proxy will maintain a binding pointer
-    // back to this texture, there would be a circular reference if we used a binding
-    // pointer here. This reference count will cause the pointer to be set to NULL if
-    // the count drops to zero, but will not cause deletion of the Renderbuffer.
-    Renderbuffer *mFaceProxies[6];
-    unsigned int *mFaceProxyRefs[6];
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Texture2DArray);
+
+    bool isMipmapComplete() const;
+    bool isLevelComplete(int level) const;
 };
+
 }
 
 #endif   // LIBGLESV2_TEXTURE_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/TransformFeedback.cpp b/src/3rdparty/angle/src/libGLESv2/TransformFeedback.cpp
new file mode 100644
index 0000000000..bfa7072326
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/TransformFeedback.cpp
@@ -0,0 +1,71 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "libGLESv2/TransformFeedback.h"
+#include "libGLESv2/renderer/TransformFeedbackImpl.h"
+
+namespace gl
+{
+
+TransformFeedback::TransformFeedback(rx::TransformFeedbackImpl* impl, GLuint id)
+    : RefCountObject(id),
+      mTransformFeedback(impl),
+      mStarted(GL_FALSE),
+      mPrimitiveMode(GL_NONE),
+      mPaused(GL_FALSE)
+{
+    ASSERT(impl != NULL);
+}
+
+TransformFeedback::~TransformFeedback()
+{
+    SafeDelete(mTransformFeedback);
+}
+
+void TransformFeedback::start(GLenum primitiveMode)
+{
+    mStarted = GL_TRUE;
+    mPrimitiveMode = primitiveMode;
+    mPaused = GL_FALSE;
+    mTransformFeedback->begin(primitiveMode);
+}
+
+void TransformFeedback::stop()
+{
+    mStarted = GL_FALSE;
+    mPrimitiveMode = GL_NONE;
+    mPaused = GL_FALSE;
+    mTransformFeedback->end();
+}
+
+GLboolean TransformFeedback::isStarted() const
+{
+    return mStarted;
+}
+
+GLenum TransformFeedback::getDrawMode() const
+{
+    return mPrimitiveMode;
+}
+
+void TransformFeedback::pause()
+{
+    mPaused = GL_TRUE;
+    mTransformFeedback->pause();
+}
+
+void TransformFeedback::resume()
+{
+    mPaused = GL_FALSE;
+    mTransformFeedback->resume();
+}
+
+GLboolean TransformFeedback::isPaused() const
+{
+    return mPaused;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/TransformFeedback.h b/src/3rdparty/angle/src/libGLESv2/TransformFeedback.h
new file mode 100644
index 0000000000..885a4fe172
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/TransformFeedback.h
@@ -0,0 +1,51 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#ifndef LIBGLESV2_TRANSFORM_FEEDBACK_H_
+#define LIBGLESV2_TRANSFORM_FEEDBACK_H_
+
+#include "common/angleutils.h"
+#include "common/RefCountObject.h"
+
+#include "angle_gl.h"
+
+namespace rx
+{
+class TransformFeedbackImpl;
+}
+
+namespace gl
+{
+
+class TransformFeedback : public RefCountObject
+{
+  public:
+    TransformFeedback(rx::TransformFeedbackImpl* impl, GLuint id);
+    virtual ~TransformFeedback();
+
+    void start(GLenum primitiveMode);
+    void stop();
+    GLboolean isStarted() const;
+
+    GLenum getDrawMode() const;
+
+    void pause();
+    void resume();
+    GLboolean isPaused() const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TransformFeedback);
+
+    rx::TransformFeedbackImpl* mTransformFeedback;
+
+    GLboolean mStarted;
+    GLenum mPrimitiveMode;
+    GLboolean mPaused;
+};
+
+}
+
+#endif // LIBGLESV2_TRANSFORM_FEEDBACK_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/Uniform.cpp b/src/3rdparty/angle/src/libGLESv2/Uniform.cpp
index 5424e271b5..bd0cd2eeec 100644
--- a/src/3rdparty/angle/src/libGLESv2/Uniform.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/Uniform.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2010-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -7,37 +6,100 @@
 
 #include "libGLESv2/Uniform.h"
 
-#include "libGLESv2/utilities.h"
+#include "common/utilities.h"
 
 namespace gl
 {
 
-Uniform::Uniform(GLenum type, GLenum precision, const std::string &name, unsigned int arraySize)
-    : type(type), precision(precision), name(name), arraySize(arraySize)
+LinkedUniform::LinkedUniform(GLenum type, GLenum precision, const std::string &name, unsigned int arraySize,
+                             const int blockIndex, const sh::BlockMemberInfo &blockInfo)
+    : type(type),
+      precision(precision),
+      name(name),
+      arraySize(arraySize),
+      blockIndex(blockIndex),
+      blockInfo(blockInfo),
+      data(NULL),
+      dirty(true),
+      psRegisterIndex(GL_INVALID_INDEX),
+      vsRegisterIndex(GL_INVALID_INDEX),
+      registerCount(0),
+      registerElement(0)
 {
-    int bytes = gl::UniformInternalSize(type) * elementCount();
-    data = new unsigned char[bytes];
-    memset(data, 0, bytes);
-    dirty = true;
-
-    psRegisterIndex = -1;
-    vsRegisterIndex = -1;
-    registerCount = VariableRowCount(type) * elementCount();
+    // We use data storage for default block uniforms to cache values that are sent to D3D during rendering
+    // Uniform blocks/buffers are treated separately by the Renderer (ES3 path only)
+    if (isInDefaultBlock())
+    {
+        size_t bytes = dataSize();
+        data = new unsigned char[bytes];
+        memset(data, 0, bytes);
+        registerCount = VariableRowCount(type) * elementCount();
+    }
 }
 
-Uniform::~Uniform()
+LinkedUniform::~LinkedUniform()
 {
     delete[] data;
 }
 
-bool Uniform::isArray() const
+bool LinkedUniform::isArray() const
 {
     return arraySize > 0;
 }
 
-unsigned int Uniform::elementCount() const
+unsigned int LinkedUniform::elementCount() const
 {
     return arraySize > 0 ? arraySize : 1;
 }
 
+bool LinkedUniform::isReferencedByVertexShader() const
+{
+    return vsRegisterIndex != GL_INVALID_INDEX;
+}
+
+bool LinkedUniform::isReferencedByFragmentShader() const
+{
+    return psRegisterIndex != GL_INVALID_INDEX;
+}
+
+bool LinkedUniform::isInDefaultBlock() const
+{
+    return blockIndex == -1;
+}
+
+size_t LinkedUniform::dataSize() const
+{
+    ASSERT(type != GL_STRUCT_ANGLEX);
+    return VariableInternalSize(type) * elementCount();
+}
+
+bool LinkedUniform::isSampler() const
+{
+    return IsSampler(type);
+}
+
+UniformBlock::UniformBlock(const std::string &name, unsigned int elementIndex, unsigned int dataSize)
+    : name(name),
+      elementIndex(elementIndex),
+      dataSize(dataSize),
+      psRegisterIndex(GL_INVALID_INDEX),
+      vsRegisterIndex(GL_INVALID_INDEX)
+{
+}
+
+bool UniformBlock::isArrayElement() const
+{
+    return elementIndex != GL_INVALID_INDEX;
+}
+
+bool UniformBlock::isReferencedByVertexShader() const
+{
+    return vsRegisterIndex != GL_INVALID_INDEX;
+}
+
+bool UniformBlock::isReferencedByFragmentShader() const
+{
+    return psRegisterIndex != GL_INVALID_INDEX;
+}
+
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/Uniform.h b/src/3rdparty/angle/src/libGLESv2/Uniform.h
index 8ab0fbe234..633d70bb19 100644
--- a/src/3rdparty/angle/src/libGLESv2/Uniform.h
+++ b/src/3rdparty/angle/src/libGLESv2/Uniform.h
@@ -7,41 +7,72 @@
 #ifndef LIBGLESV2_UNIFORM_H_
 #define LIBGLESV2_UNIFORM_H_
 
-#include <string>
-#include <vector>
+#include "common/debug.h"
+#include "common/blocklayout.h"
 
-#define GL_APICALL
-#include <GLES2/gl2.h>
+#include "libGLESv2/angletypes.h"
 
-#include "common/debug.h"
+#include "angle_gl.h"
+
+#include <string>
+#include <vector>
 
 namespace gl
 {
 
 // Helper struct representing a single shader uniform
-struct Uniform
+struct LinkedUniform
 {
-    Uniform(GLenum type, GLenum precision, const std::string &name, unsigned int arraySize);
+    LinkedUniform(GLenum type, GLenum precision, const std::string &name, unsigned int arraySize, const int blockIndex, const sh::BlockMemberInfo &blockInfo);
 
-    ~Uniform();
+    ~LinkedUniform();
 
     bool isArray() const;
     unsigned int elementCount() const;
+    bool isReferencedByVertexShader() const;
+    bool isReferencedByFragmentShader() const;
+    bool isInDefaultBlock() const;
+    size_t dataSize() const;
+    bool isSampler() const;
 
     const GLenum type;
     const GLenum precision;
     const std::string name;
     const unsigned int arraySize;
+    const int blockIndex;
+    const sh::BlockMemberInfo blockInfo;
 
     unsigned char *data;
     bool dirty;
 
-    int psRegisterIndex;
-    int vsRegisterIndex;
+    unsigned int psRegisterIndex;
+    unsigned int vsRegisterIndex;
     unsigned int registerCount;
+
+    // Register "elements" are used for uniform structs in ES3, to appropriately identify single uniforms
+    // inside aggregate types, which are packed according C-like structure rules.
+    unsigned int registerElement;
 };
 
-typedef std::vector<Uniform*> UniformArray;
+// Helper struct representing a single shader uniform block
+struct UniformBlock
+{
+    // use GL_INVALID_INDEX for non-array elements
+    UniformBlock(const std::string &name, unsigned int elementIndex, unsigned int dataSize);
+
+    bool isArrayElement() const;
+    bool isReferencedByVertexShader() const;
+    bool isReferencedByFragmentShader() const;
+
+    const std::string name;
+    const unsigned int elementIndex;
+    const unsigned int dataSize;
+
+    std::vector<unsigned int> memberUniformIndexes;
+
+    unsigned int psRegisterIndex;
+    unsigned int vsRegisterIndex;
+};
 
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/VertexArray.cpp b/src/3rdparty/angle/src/libGLESv2/VertexArray.cpp
new file mode 100644
index 0000000000..f8ca661062
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/VertexArray.cpp
@@ -0,0 +1,96 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// Implementation of the state class for mananging GLES 3 Vertex Array Objects.
+//
+
+#include "libGLESv2/VertexArray.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/renderer/VertexArrayImpl.h"
+
+namespace gl
+{
+
+VertexArray::VertexArray(rx::VertexArrayImpl *impl, GLuint id, size_t maxAttribs)
+    : mId(id),
+      mVertexArray(impl),
+      mVertexAttributes(maxAttribs)
+{
+    ASSERT(impl != NULL);
+}
+
+VertexArray::~VertexArray()
+{
+    SafeDelete(mVertexArray);
+
+    for (size_t i = 0; i < getMaxAttribs(); i++)
+    {
+        mVertexAttributes[i].buffer.set(NULL);
+    }
+    mElementArrayBuffer.set(NULL);
+}
+
+GLuint VertexArray::id() const
+{
+    return mId;
+}
+
+void VertexArray::detachBuffer(GLuint bufferName)
+{
+    for (size_t attribute = 0; attribute < getMaxAttribs(); attribute++)
+    {
+        if (mVertexAttributes[attribute].buffer.id() == bufferName)
+        {
+            mVertexAttributes[attribute].buffer.set(NULL);
+        }
+    }
+
+    if (mElementArrayBuffer.id() == bufferName)
+    {
+        mElementArrayBuffer.set(NULL);
+    }
+}
+
+const VertexAttribute& VertexArray::getVertexAttribute(size_t attributeIndex) const
+{
+    ASSERT(attributeIndex < getMaxAttribs());
+    return mVertexAttributes[attributeIndex];
+}
+
+void VertexArray::setVertexAttribDivisor(GLuint index, GLuint divisor)
+{
+    ASSERT(index < getMaxAttribs());
+    mVertexAttributes[index].divisor = divisor;
+    mVertexArray->setAttributeDivisor(index, divisor);
+}
+
+void VertexArray::enableAttribute(unsigned int attributeIndex, bool enabledState)
+{
+    ASSERT(attributeIndex < getMaxAttribs());
+    mVertexAttributes[attributeIndex].enabled = enabledState;
+    mVertexArray->enableAttribute(attributeIndex, enabledState);
+}
+
+void VertexArray::setAttributeState(unsigned int attributeIndex, gl::Buffer *boundBuffer, GLint size, GLenum type,
+                                    bool normalized, bool pureInteger, GLsizei stride, const void *pointer)
+{
+    ASSERT(attributeIndex < getMaxAttribs());
+    mVertexAttributes[attributeIndex].buffer.set(boundBuffer);
+    mVertexAttributes[attributeIndex].size = size;
+    mVertexAttributes[attributeIndex].type = type;
+    mVertexAttributes[attributeIndex].normalized = normalized;
+    mVertexAttributes[attributeIndex].pureInteger = pureInteger;
+    mVertexAttributes[attributeIndex].stride = stride;
+    mVertexAttributes[attributeIndex].pointer = pointer;
+    mVertexArray->setAttribute(attributeIndex, mVertexAttributes[attributeIndex]);
+}
+
+void VertexArray::setElementArrayBuffer(Buffer *buffer)
+{
+    mElementArrayBuffer.set(buffer);
+    mVertexArray->setElementArrayBuffer(buffer);
+}
+
+}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/VertexArray.h b/src/3rdparty/angle/src/libGLESv2/VertexArray.h
new file mode 100644
index 0000000000..993ba042cf
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/VertexArray.h
@@ -0,0 +1,63 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// This class contains prototypes for representing GLES 3 Vertex Array Objects:
+//
+//   The buffer objects that are to be used by the vertex stage of the GL are collected
+//   together to form a vertex array object. All state related to the definition of data used
+//   by the vertex processor is encapsulated in a vertex array object.
+//
+
+#ifndef LIBGLESV2_VERTEXARRAY_H_
+#define LIBGLESV2_VERTEXARRAY_H_
+
+#include "common/RefCountObject.h"
+#include "libGLESv2/constants.h"
+#include "libGLESv2/VertexAttribute.h"
+
+#include <vector>
+
+namespace rx
+{
+class Renderer;
+class VertexArrayImpl;
+}
+
+namespace gl
+{
+class Buffer;
+
+class VertexArray
+{
+  public:
+    VertexArray(rx::VertexArrayImpl *impl, GLuint id, size_t maxAttribs);
+    ~VertexArray();
+
+    GLuint id() const;
+
+    const VertexAttribute& getVertexAttribute(size_t attributeIndex) const;
+    void detachBuffer(GLuint bufferName);
+    void setVertexAttribDivisor(GLuint index, GLuint divisor);
+    void enableAttribute(unsigned int attributeIndex, bool enabledState);
+    void setAttributeState(unsigned int attributeIndex, gl::Buffer *boundBuffer, GLint size, GLenum type,
+                           bool normalized, bool pureInteger, GLsizei stride, const void *pointer);
+
+    const VertexAttribute* getVertexAttributes() const { return mVertexAttributes.data(); }
+    Buffer *getElementArrayBuffer() const { return mElementArrayBuffer.get(); }
+    void setElementArrayBuffer(Buffer *buffer);
+    GLuint getElementArrayBufferId() const { return mElementArrayBuffer.id(); }
+    size_t getMaxAttribs() const { return mVertexAttributes.size(); }
+
+  private:
+    GLuint mId;
+
+    rx::VertexArrayImpl *mVertexArray;
+    std::vector<VertexAttribute> mVertexAttributes;
+    BindingPointer<Buffer> mElementArrayBuffer;
+};
+
+}
+
+#endif // LIBGLESV2_VERTEXARRAY_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/VertexAttribute.cpp b/src/3rdparty/angle/src/libGLESv2/VertexAttribute.cpp
new file mode 100644
index 0000000000..1096856b8a
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/VertexAttribute.cpp
@@ -0,0 +1,55 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// Implementation of the state class for mananging GLES 3 Vertex Array Objects.
+//
+
+#include "libGLESv2/VertexAttribute.h"
+
+namespace gl
+{
+
+VertexAttribute::VertexAttribute()
+    : enabled(false),
+      type(GL_FLOAT),
+      size(4),
+      normalized(false),
+      pureInteger(false),
+      stride(0),
+      pointer(NULL),
+      divisor(0)
+{
+}
+
+size_t ComputeVertexAttributeTypeSize(const VertexAttribute& attrib)
+{
+    GLuint size = attrib.size;
+    switch (attrib.type)
+    {
+      case GL_BYTE:                        return size * sizeof(GLbyte);
+      case GL_UNSIGNED_BYTE:               return size * sizeof(GLubyte);
+      case GL_SHORT:                       return size * sizeof(GLshort);
+      case GL_UNSIGNED_SHORT:              return size * sizeof(GLushort);
+      case GL_INT:                         return size * sizeof(GLint);
+      case GL_UNSIGNED_INT:                return size * sizeof(GLuint);
+      case GL_INT_2_10_10_10_REV:          return 4;
+      case GL_UNSIGNED_INT_2_10_10_10_REV: return 4;
+      case GL_FIXED:                       return size * sizeof(GLfixed);
+      case GL_HALF_FLOAT:                  return size * sizeof(GLhalf);
+      case GL_FLOAT:                       return size * sizeof(GLfloat);
+      default: UNREACHABLE();              return size * sizeof(GLfloat);
+    }
+}
+
+size_t ComputeVertexAttributeStride(const VertexAttribute& attrib)
+{
+    if (!attrib.enabled)
+    {
+        return 16;
+    }
+    return attrib.stride ? attrib.stride : ComputeVertexAttributeTypeSize(attrib);
+}
+
+}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/VertexAttribute.h b/src/3rdparty/angle/src/libGLESv2/VertexAttribute.h
new file mode 100644
index 0000000000..e9757b618b
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/VertexAttribute.h
@@ -0,0 +1,119 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// Helper structure describing a single vertex attribute
+//
+
+#ifndef LIBGLESV2_VERTEXATTRIBUTE_H_
+#define LIBGLESV2_VERTEXATTRIBUTE_H_
+
+#include "libGLESv2/Buffer.h"
+
+namespace gl
+{
+
+struct VertexAttribute
+{
+    bool enabled; // From glEnable/DisableVertexAttribArray
+
+    GLenum type;
+    GLuint size;
+    bool normalized;
+    bool pureInteger;
+    GLuint stride; // 0 means natural stride
+
+    union
+    {
+        const GLvoid *pointer;
+        GLintptr offset;
+    };
+    BindingPointer<Buffer> buffer; // Captured when glVertexAttribPointer is called.
+
+    GLuint divisor;
+
+    VertexAttribute();
+};
+
+template <typename T>
+T QuerySingleVertexAttributeParameter(const VertexAttribute& attrib, GLenum pname)
+{
+  switch (pname)
+  {
+    case GL_VERTEX_ATTRIB_ARRAY_ENABLED:
+      return static_cast<T>(attrib.enabled ? GL_TRUE : GL_FALSE);
+    case GL_VERTEX_ATTRIB_ARRAY_SIZE:
+      return static_cast<T>(attrib.size);
+    case GL_VERTEX_ATTRIB_ARRAY_STRIDE:
+      return static_cast<T>(attrib.stride);
+    case GL_VERTEX_ATTRIB_ARRAY_TYPE:
+      return static_cast<T>(attrib.type);
+    case GL_VERTEX_ATTRIB_ARRAY_NORMALIZED:
+      return static_cast<T>(attrib.normalized ? GL_TRUE : GL_FALSE);
+    case GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING:
+      return static_cast<T>(attrib.buffer.id());
+    case GL_VERTEX_ATTRIB_ARRAY_DIVISOR:
+      return static_cast<T>(attrib.divisor);
+    case GL_VERTEX_ATTRIB_ARRAY_INTEGER:
+      return static_cast<T>(attrib.pureInteger ? GL_TRUE : GL_FALSE);
+    default:
+      UNREACHABLE();
+      return static_cast<T>(0);
+  }
+}
+
+size_t ComputeVertexAttributeTypeSize(const VertexAttribute& attrib);
+size_t ComputeVertexAttributeStride(const VertexAttribute& attrib);
+
+struct VertexAttribCurrentValueData
+{
+    union
+    {
+        GLfloat FloatValues[4];
+        GLint IntValues[4];
+        GLuint UnsignedIntValues[4];
+    };
+    GLenum Type;
+
+    void setFloatValues(const GLfloat floatValues[4])
+    {
+        for (unsigned int valueIndex = 0; valueIndex < 4; valueIndex++)
+        {
+            FloatValues[valueIndex] = floatValues[valueIndex];
+        }
+        Type = GL_FLOAT;
+    }
+
+    void setIntValues(const GLint intValues[4])
+    {
+        for (unsigned int valueIndex = 0; valueIndex < 4; valueIndex++)
+        {
+            IntValues[valueIndex] = intValues[valueIndex];
+        }
+        Type = GL_INT;
+    }
+
+    void setUnsignedIntValues(const GLuint unsignedIntValues[4])
+    {
+        for (unsigned int valueIndex = 0; valueIndex < 4; valueIndex++)
+        {
+            UnsignedIntValues[valueIndex] = unsignedIntValues[valueIndex];
+        }
+        Type = GL_UNSIGNED_INT;
+    }
+
+    bool operator==(const VertexAttribCurrentValueData &other)
+    {
+        return (Type == other.Type && memcmp(FloatValues, other.FloatValues, sizeof(float) * 4) == 0);
+    }
+
+    bool operator!=(const VertexAttribCurrentValueData &other)
+    {
+        return !(*this == other);
+    }
+};
+
+}
+
+#endif // LIBGLESV2_VERTEXATTRIBUTE_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/angletypes.cpp b/src/3rdparty/angle/src/libGLESv2/angletypes.cpp
new file mode 100644
index 0000000000..bb6425df64
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/angletypes.cpp
@@ -0,0 +1,195 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// angletypes.h : Defines a variety of structures and enum types that are used throughout libGLESv2
+
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/VertexAttribute.h"
+
+namespace gl
+{
+
+SamplerState::SamplerState()
+    : minFilter(GL_NEAREST_MIPMAP_LINEAR),
+      magFilter(GL_LINEAR),
+      wrapS(GL_REPEAT),
+      wrapT(GL_REPEAT),
+      wrapR(GL_REPEAT),
+      maxAnisotropy(1.0f),
+      baseLevel(0),
+      maxLevel(1000),
+      minLod(-FLT_MAX),
+      maxLod(FLT_MAX),
+      compareMode(GL_NONE),
+      compareFunc(GL_LEQUAL),
+      swizzleRed(GL_RED),
+      swizzleGreen(GL_GREEN),
+      swizzleBlue(GL_BLUE),
+      swizzleAlpha(GL_ALPHA)
+{}
+
+bool SamplerState::swizzleRequired() const
+{
+    return swizzleRed != GL_RED || swizzleGreen != GL_GREEN ||
+           swizzleBlue != GL_BLUE || swizzleAlpha != GL_ALPHA;
+}
+
+static void MinMax(int a, int b, int *minimum, int *maximum)
+{
+    if (a < b)
+    {
+        *minimum = a;
+        *maximum = b;
+    }
+    else
+    {
+        *minimum = b;
+        *maximum = a;
+    }
+}
+
+bool ClipRectangle(const Rectangle &source, const Rectangle &clip, Rectangle *intersection)
+{
+    int minSourceX, maxSourceX, minSourceY, maxSourceY;
+    MinMax(source.x, source.x + source.width, &minSourceX, &maxSourceX);
+    MinMax(source.y, source.y + source.height, &minSourceY, &maxSourceY);
+
+    int minClipX, maxClipX, minClipY, maxClipY;
+    MinMax(clip.x, clip.x + clip.width, &minClipX, &maxClipX);
+    MinMax(clip.y, clip.y + clip.height, &minClipY, &maxClipY);
+
+    if (minSourceX >= maxClipX || maxSourceX <= minClipX || minSourceY >= maxClipY || maxSourceY <= minClipY)
+    {
+        if (intersection)
+        {
+            intersection->x = minSourceX;
+            intersection->y = maxSourceY;
+            intersection->width = maxSourceX - minSourceX;
+            intersection->height = maxSourceY - minSourceY;
+        }
+
+        return false;
+    }
+    else
+    {
+        if (intersection)
+        {
+            intersection->x = std::max(minSourceX, minClipX);
+            intersection->y = std::max(minSourceY, minClipY);
+            intersection->width  = std::min(maxSourceX, maxClipX) - std::max(minSourceX, minClipX);
+            intersection->height = std::min(maxSourceY, maxClipY) - std::max(minSourceY, minClipY);
+        }
+
+        return true;
+    }
+}
+
+VertexFormat::VertexFormat()
+    : mType(GL_NONE),
+      mNormalized(GL_FALSE),
+      mComponents(0),
+      mPureInteger(false)
+{}
+
+VertexFormat::VertexFormat(GLenum type, GLboolean normalized, GLuint components, bool pureInteger)
+    : mType(type),
+      mNormalized(normalized),
+      mComponents(components),
+      mPureInteger(pureInteger)
+{
+    // Float data can not be normalized, so ignore the user setting
+    if (mType == GL_FLOAT || mType == GL_HALF_FLOAT || mType == GL_FIXED)
+    {
+        mNormalized = GL_FALSE;
+    }
+}
+
+VertexFormat::VertexFormat(const VertexAttribute &attrib)
+    : mType(attrib.type),
+      mNormalized(attrib.normalized ? GL_TRUE : GL_FALSE),
+      mComponents(attrib.size),
+      mPureInteger(attrib.pureInteger)
+{
+    // Ensure we aren't initializing a vertex format which should be using
+    // the current-value type
+    ASSERT(attrib.enabled);
+
+    // Float data can not be normalized, so ignore the user setting
+    if (mType == GL_FLOAT || mType == GL_HALF_FLOAT || mType == GL_FIXED)
+    {
+        mNormalized = GL_FALSE;
+    }
+}
+
+VertexFormat::VertexFormat(const VertexAttribute &attrib, GLenum currentValueType)
+    : mType(attrib.type),
+      mNormalized(attrib.normalized ? GL_TRUE : GL_FALSE),
+      mComponents(attrib.size),
+      mPureInteger(attrib.pureInteger)
+{
+    if (!attrib.enabled)
+    {
+        mType = currentValueType;
+        mNormalized = GL_FALSE;
+        mComponents = 4;
+        mPureInteger = (currentValueType != GL_FLOAT);
+    }
+
+    // Float data can not be normalized, so ignore the user setting
+    if (mType == GL_FLOAT || mType == GL_HALF_FLOAT || mType == GL_FIXED)
+    {
+        mNormalized = GL_FALSE;
+    }
+}
+
+void VertexFormat::GetInputLayout(VertexFormat *inputLayout,
+                                  ProgramBinary *programBinary,
+                                  const VertexAttribute *attributes,
+                                  const gl::VertexAttribCurrentValueData *currentValues)
+{
+    for (unsigned int attributeIndex = 0; attributeIndex < MAX_VERTEX_ATTRIBS; attributeIndex++)
+    {
+        int semanticIndex = programBinary->getSemanticIndex(attributeIndex);
+
+        if (semanticIndex != -1)
+        {
+            inputLayout[semanticIndex] = VertexFormat(attributes[attributeIndex], currentValues[attributeIndex].Type);
+        }
+    }
+}
+
+bool VertexFormat::operator==(const VertexFormat &other) const
+{
+    return (mType == other.mType                &&
+            mComponents == other.mComponents    &&
+            mNormalized == other.mNormalized    &&
+            mPureInteger == other.mPureInteger  );
+}
+
+bool VertexFormat::operator!=(const VertexFormat &other) const
+{
+    return !(*this == other);
+}
+
+bool VertexFormat::operator<(const VertexFormat& other) const
+{
+    if (mType != other.mType)
+    {
+        return mType < other.mType;
+    }
+    if (mNormalized != other.mNormalized)
+    {
+        return mNormalized < other.mNormalized;
+    }
+    if (mComponents != other.mComponents)
+    {
+        return mComponents < other.mComponents;
+    }
+    return mPureInteger < other.mPureInteger;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/angletypes.h b/src/3rdparty/angle/src/libGLESv2/angletypes.h
index b2f0cad265..642a6ec266 100644
--- a/src/3rdparty/angle/src/libGLESv2/angletypes.h
+++ b/src/3rdparty/angle/src/libGLESv2/angletypes.h
@@ -9,17 +9,16 @@
 #ifndef LIBGLESV2_ANGLETYPES_H_
 #define LIBGLESV2_ANGLETYPES_H_
 
-namespace gl
-{
+#include "libGLESv2/constants.h"
+#include "common/RefCountObject.h"
+#include <float.h>
 
-enum TextureType
+namespace gl
 {
-    TEXTURE_2D,
-    TEXTURE_CUBE,
-
-    TEXTURE_TYPE_COUNT,
-    TEXTURE_UNKNOWN
-};
+class Buffer;
+class ProgramBinary;
+struct VertexAttribute;
+struct VertexAttribCurrentValueData;
 
 enum SamplerType
 {
@@ -27,20 +26,56 @@ enum SamplerType
     SAMPLER_VERTEX
 };
 
+template <typename T>
 struct Color
 {
-    float red;
-    float green;
-    float blue;
-    float alpha;
+    T red;
+    T green;
+    T blue;
+    T alpha;
+
+    Color() : red(0), green(0), blue(0), alpha(0) { }
+    Color(T r, T g, T b, T a) : red(r), green(g), blue(b), alpha(a) { }
 };
 
+typedef Color<float> ColorF;
+typedef Color<int> ColorI;
+typedef Color<unsigned int> ColorUI;
+
 struct Rectangle
 {
     int x;
     int y;
     int width;
     int height;
+
+    Rectangle() : x(0), y(0), width(0), height(0) { }
+    Rectangle(int x_in, int y_in, int width_in, int height_in) : x(x_in), y(y_in), width(width_in), height(height_in) { }
+};
+
+bool ClipRectangle(const Rectangle &source, const Rectangle &clip, Rectangle *intersection);
+
+struct Box
+{
+    int x;
+    int y;
+    int z;
+    int width;
+    int height;
+    int depth;
+
+    Box() : x(0), y(0), z(0), width(0), height(0), depth(0) { }
+    Box(int x_in, int y_in, int z_in, int width_in, int height_in, int depth_in) : x(x_in), y(y_in), z(z_in), width(width_in), height(height_in), depth(depth_in) { }
+};
+
+struct Extents
+{
+    int width;
+    int height;
+    int depth;
+
+    Extents() : width(0), height(0), depth(0) { }
+    Extents(int width_, int height_, int depth_) : width(width_), height(height_), depth(depth_) { }
 };
 
 struct RasterizerState
@@ -55,6 +90,8 @@ struct RasterizerState
 
     bool pointDrawMode;
     bool multiSample;
+
+    bool rasterizerDiscard;
 };
 
 struct BlendState
@@ -100,28 +137,125 @@ struct DepthStencilState
 
 struct SamplerState
 {
+    SamplerState();
+
     GLenum minFilter;
     GLenum magFilter;
     GLenum wrapS;
     GLenum wrapT;
+    GLenum wrapR;
     float maxAnisotropy;
-    int lodOffset;
+
+    GLint baseLevel;
+    GLint maxLevel;
+    GLfloat minLod;
+    GLfloat maxLod;
+
+    GLenum compareMode;
+    GLenum compareFunc;
+
+    GLenum swizzleRed;
+    GLenum swizzleGreen;
+    GLenum swizzleBlue;
+    GLenum swizzleAlpha;
+
+    bool swizzleRequired() const;
 };
 
 struct ClearParameters
 {
-    GLbitfield mask;
-
-    Color colorClearValue;
+    bool clearColor[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS];
+    ColorF colorFClearValue;
+    ColorI colorIClearValue;
+    ColorUI colorUIClearValue;
+    GLenum colorClearType;
     bool colorMaskRed;
     bool colorMaskGreen;
     bool colorMaskBlue;
     bool colorMaskAlpha;
 
+    bool clearDepth;
     float depthClearValue;
 
+    bool clearStencil;
     GLint stencilClearValue;
     GLuint stencilWriteMask;
+
+    bool scissorEnabled;
+    Rectangle scissor;
+};
+
+struct PixelUnpackState
+{
+    BindingPointer<Buffer> pixelBuffer;
+    GLint alignment;
+
+    PixelUnpackState()
+        : alignment(4)
+    {}
+
+    explicit PixelUnpackState(GLint alignmentIn)
+        : alignment(alignmentIn)
+    {}
+};
+
+struct PixelPackState
+{
+    BindingPointer<Buffer> pixelBuffer;
+    GLint alignment;
+    bool reverseRowOrder;
+
+    PixelPackState()
+        : alignment(4),
+          reverseRowOrder(false)
+    {}
+
+    explicit PixelPackState(GLint alignmentIn, bool reverseRowOrderIn)
+        : alignment(alignmentIn),
+          reverseRowOrder(reverseRowOrderIn)
+    {}
+};
+
+struct VertexFormat
+{
+    GLenum      mType;
+    GLboolean   mNormalized;
+    GLuint      mComponents;
+    bool        mPureInteger;
+
+    VertexFormat();
+    VertexFormat(GLenum type, GLboolean normalized, GLuint components, bool pureInteger);
+    explicit VertexFormat(const VertexAttribute &attribute);
+    VertexFormat(const VertexAttribute &attribute, GLenum currentValueType);
+
+    static void GetInputLayout(VertexFormat *inputLayout,
+                               ProgramBinary *programBinary,
+                               const VertexAttribute *attributes,
+                               const gl::VertexAttribCurrentValueData *currentValues);
+
+    bool operator==(const VertexFormat &other) const;
+    bool operator!=(const VertexFormat &other) const;
+    bool operator<(const VertexFormat& other) const;
+};
+
+}
+
+namespace rx
+{
+
+enum VertexConversionType
+{
+    VERTEX_CONVERT_NONE = 0,
+    VERTEX_CONVERT_CPU  = 1,
+    VERTEX_CONVERT_GPU  = 2,
+    VERTEX_CONVERT_BOTH = 3
+};
+
+enum D3DWorkaroundType
+{
+    ANGLE_D3D_WORKAROUND_NONE,
+    ANGLE_D3D_WORKAROUND_SKIP_OPTIMIZATION,
+    ANGLE_D3D_WORKAROUND_MAX_OPTIMIZATION
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/constants.h b/src/3rdparty/angle/src/libGLESv2/constants.h
index 9f24d66a7d..69c4823fb2 100644
--- a/src/3rdparty/angle/src/libGLESv2/constants.h
+++ b/src/3rdparty/angle/src/libGLESv2/constants.h
@@ -15,19 +15,29 @@ namespace gl
 enum
 {
     MAX_VERTEX_ATTRIBS = 16,
-    MAX_TEXTURE_IMAGE_UNITS = 16,
 
     // Implementation upper limits, real maximums depend on the hardware
-    IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS = 16,
-    IMPLEMENTATION_MAX_COMBINED_TEXTURE_IMAGE_UNITS = MAX_TEXTURE_IMAGE_UNITS + IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS,    
-
     IMPLEMENTATION_MAX_VARYING_VECTORS = 32,
-    IMPLEMENTATION_MAX_DRAW_BUFFERS = 8
-};
+    IMPLEMENTATION_MAX_DRAW_BUFFERS = 8,
+    IMPLEMENTATION_MAX_FRAMEBUFFER_ATTACHMENTS = IMPLEMENTATION_MAX_DRAW_BUFFERS + 2, // 2 extra for depth and/or stencil buffers
+
+    IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS = 16,
+    IMPLEMENTATION_MAX_FRAGMENT_SHADER_UNIFORM_BUFFERS = 16,
+    IMPLEMENTATION_MAX_COMBINED_SHADER_UNIFORM_BUFFERS = IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS +
+                                                         IMPLEMENTATION_MAX_FRAGMENT_SHADER_UNIFORM_BUFFERS,
 
-const float ALIASED_LINE_WIDTH_RANGE_MIN = 1.0f;
-const float ALIASED_LINE_WIDTH_RANGE_MAX = 1.0f;
-const float ALIASED_POINT_SIZE_RANGE_MIN = 1.0f;
+    IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4,
+
+    // These are the maximums the implementation can support
+    // The actual GL caps are limited by the device caps
+    // and should be queried from the Context
+    IMPLEMENTATION_MAX_2D_TEXTURE_SIZE = 16384,
+    IMPLEMENTATION_MAX_CUBE_MAP_TEXTURE_SIZE = 16384,
+    IMPLEMENTATION_MAX_3D_TEXTURE_SIZE = 2048,
+    IMPLEMENTATION_MAX_2D_ARRAY_TEXTURE_LAYERS = 2048,
+
+    IMPLEMENTATION_MAX_TEXTURE_LEVELS = 15   // 1+log2 of MAX_TEXTURE_SIZE
+};
 
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/formatutils.cpp b/src/3rdparty/angle/src/libGLESv2/formatutils.cpp
new file mode 100644
index 0000000000..8674d5337f
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/formatutils.cpp
@@ -0,0 +1,629 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// formatutils.cpp: Queries for GL image formats.
+
+#include "common/mathutil.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/Context.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/imageformats.h"
+#include "libGLESv2/renderer/copyimage.h"
+
+namespace gl
+{
+
+// ES2 requires that format is equal to internal format at all glTex*Image2D entry points and the implementation
+// can decide the true, sized, internal format. The ES2FormatMap determines the internal format for all valid
+// format and type combinations.
+
+FormatType::FormatType()
+    : internalFormat(GL_NONE),
+      colorWriteFunction(NULL)
+{
+}
+
+typedef std::pair<GLenum, GLenum> FormatTypePair;
+typedef std::pair<FormatTypePair, FormatType> FormatPair;
+typedef std::map<FormatTypePair, FormatType> FormatMap;
+
+// A helper function to insert data into the format map with fewer characters.
+static inline void InsertFormatMapping(FormatMap *map, GLenum format, GLenum type, GLenum internalFormat, ColorWriteFunction writeFunc)
+{
+    FormatType info;
+    info.internalFormat = internalFormat;
+    info.colorWriteFunction = writeFunc;
+    map->insert(FormatPair(FormatTypePair(format, type), info));
+}
+
+FormatMap BuildFormatMap()
+{
+    FormatMap map;
+
+    using namespace rx;
+
+    //                       | Format               | Type                             | Internal format          | Color write function             |
+    InsertFormatMapping(&map, GL_RGBA,               GL_UNSIGNED_BYTE,                  GL_RGBA8,                  WriteColor<R8G8B8A8, GLfloat>     );
+    InsertFormatMapping(&map, GL_RGBA,               GL_BYTE,                           GL_RGBA8_SNORM,            WriteColor<R8G8B8A8S, GLfloat>    );
+    InsertFormatMapping(&map, GL_RGBA,               GL_UNSIGNED_SHORT_4_4_4_4,         GL_RGBA4,                  WriteColor<R4G4B4A4, GLfloat>     );
+    InsertFormatMapping(&map, GL_RGBA,               GL_UNSIGNED_SHORT_5_5_5_1,         GL_RGB5_A1,                WriteColor<R5G5B5A1, GLfloat>     );
+    InsertFormatMapping(&map, GL_RGBA,               GL_UNSIGNED_INT_2_10_10_10_REV,    GL_RGB10_A2,               WriteColor<R10G10B10A2, GLfloat>  );
+    InsertFormatMapping(&map, GL_RGBA,               GL_FLOAT,                          GL_RGBA32F,                WriteColor<R32G32B32A32F, GLfloat>);
+    InsertFormatMapping(&map, GL_RGBA,               GL_HALF_FLOAT,                     GL_RGBA16F,                WriteColor<R16G16B16A16F, GLfloat>);
+    InsertFormatMapping(&map, GL_RGBA,               GL_HALF_FLOAT_OES,                 GL_RGBA16F,                WriteColor<R16G16B16A16F, GLfloat>);
+
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_UNSIGNED_BYTE,                  GL_RGBA8UI,                WriteColor<R8G8B8A8, GLuint>      );
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_BYTE,                           GL_RGBA8I,                 WriteColor<R8G8B8A8S, GLint>      );
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_UNSIGNED_SHORT,                 GL_RGBA16UI,               WriteColor<R16G16B16A16, GLuint>  );
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_SHORT,                          GL_RGBA16I,                WriteColor<R16G16B16A16S, GLint>  );
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_UNSIGNED_INT,                   GL_RGBA32UI,               WriteColor<R32G32B32A32, GLuint>  );
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_INT,                            GL_RGBA32I,                WriteColor<R32G32B32A32S, GLint>  );
+    InsertFormatMapping(&map, GL_RGBA_INTEGER,       GL_UNSIGNED_INT_2_10_10_10_REV,    GL_RGB10_A2UI,             WriteColor<R10G10B10A2, GLuint>   );
+
+    InsertFormatMapping(&map, GL_RGB,                GL_UNSIGNED_BYTE,                  GL_RGB8,                   WriteColor<R8G8B8, GLfloat>       );
+    InsertFormatMapping(&map, GL_RGB,                GL_BYTE,                           GL_RGB8_SNORM,             WriteColor<R8G8B8S, GLfloat>      );
+    InsertFormatMapping(&map, GL_RGB,                GL_UNSIGNED_SHORT_5_6_5,           GL_RGB565,                 WriteColor<R5G6B5, GLfloat>       );
+    InsertFormatMapping(&map, GL_RGB,                GL_UNSIGNED_INT_10F_11F_11F_REV,   GL_R11F_G11F_B10F,         WriteColor<R11G11B10F, GLfloat>   );
+    InsertFormatMapping(&map, GL_RGB,                GL_UNSIGNED_INT_5_9_9_9_REV,       GL_RGB9_E5,                WriteColor<R9G9B9E5, GLfloat>     );
+    InsertFormatMapping(&map, GL_RGB,                GL_FLOAT,                          GL_RGB32F,                 WriteColor<R32G32B32F, GLfloat>   );
+    InsertFormatMapping(&map, GL_RGB,                GL_HALF_FLOAT,                     GL_RGB16F,                 WriteColor<R16G16B16F, GLfloat>   );
+    InsertFormatMapping(&map, GL_RGB,                GL_HALF_FLOAT_OES,                 GL_RGB16F,                 WriteColor<R16G16B16F, GLfloat>   );
+
+    InsertFormatMapping(&map, GL_RGB_INTEGER,        GL_UNSIGNED_BYTE,                  GL_RGB8UI,                 WriteColor<R8G8B8, GLuint>        );
+    InsertFormatMapping(&map, GL_RGB_INTEGER,        GL_BYTE,                           GL_RGB8I,                  WriteColor<R8G8B8S, GLint>        );
+    InsertFormatMapping(&map, GL_RGB_INTEGER,        GL_UNSIGNED_SHORT,                 GL_RGB16UI,                WriteColor<R16G16B16, GLuint>     );
+    InsertFormatMapping(&map, GL_RGB_INTEGER,        GL_SHORT,                          GL_RGB16I,                 WriteColor<R16G16B16S, GLint>     );
+    InsertFormatMapping(&map, GL_RGB_INTEGER,        GL_UNSIGNED_INT,                   GL_RGB32UI,                WriteColor<R32G32B32, GLuint>     );
+    InsertFormatMapping(&map, GL_RGB_INTEGER,        GL_INT,                            GL_RGB32I,                 WriteColor<R32G32B32S, GLint>     );
+
+    InsertFormatMapping(&map, GL_RG,                 GL_UNSIGNED_BYTE,                  GL_RG8,                    WriteColor<R8G8, GLfloat>         );
+    InsertFormatMapping(&map, GL_RG,                 GL_BYTE,                           GL_RG8_SNORM,              WriteColor<R8G8S, GLfloat>        );
+    InsertFormatMapping(&map, GL_RG,                 GL_FLOAT,                          GL_RG32F,                  WriteColor<R32G32F, GLfloat>      );
+    InsertFormatMapping(&map, GL_RG,                 GL_HALF_FLOAT,                     GL_RG16F,                  WriteColor<R16G16F, GLfloat>      );
+    InsertFormatMapping(&map, GL_RG,                 GL_HALF_FLOAT_OES,                 GL_RG16F,                  WriteColor<R16G16F, GLfloat>      );
+
+    InsertFormatMapping(&map, GL_RG_INTEGER,         GL_UNSIGNED_BYTE,                  GL_RG8UI,                  WriteColor<R8G8, GLuint>          );
+    InsertFormatMapping(&map, GL_RG_INTEGER,         GL_BYTE,                           GL_RG8I,                   WriteColor<R8G8S, GLint>          );
+    InsertFormatMapping(&map, GL_RG_INTEGER,         GL_UNSIGNED_SHORT,                 GL_RG16UI,                 WriteColor<R16G16, GLuint>        );
+    InsertFormatMapping(&map, GL_RG_INTEGER,         GL_SHORT,                          GL_RG16I,                  WriteColor<R16G16S, GLint>        );
+    InsertFormatMapping(&map, GL_RG_INTEGER,         GL_UNSIGNED_INT,                   GL_RG32UI,                 WriteColor<R32G32, GLuint>        );
+    InsertFormatMapping(&map, GL_RG_INTEGER,         GL_INT,                            GL_RG32I,                  WriteColor<R32G32S, GLint>        );
+
+    InsertFormatMapping(&map, GL_RED,                GL_UNSIGNED_BYTE,                  GL_R8,                     WriteColor<R8, GLfloat>           );
+    InsertFormatMapping(&map, GL_RED,                GL_BYTE,                           GL_R8_SNORM,               WriteColor<R8S, GLfloat>          );
+    InsertFormatMapping(&map, GL_RED,                GL_FLOAT,                          GL_R32F,                   WriteColor<R32F, GLfloat>         );
+    InsertFormatMapping(&map, GL_RED,                GL_HALF_FLOAT,                     GL_R16F,                   WriteColor<R16F, GLfloat>         );
+    InsertFormatMapping(&map, GL_RED,                GL_HALF_FLOAT_OES,                 GL_R16F,                   WriteColor<R16F, GLfloat>         );
+
+    InsertFormatMapping(&map, GL_RED_INTEGER,        GL_UNSIGNED_BYTE,                  GL_R8UI,                   WriteColor<R8, GLuint>            );
+    InsertFormatMapping(&map, GL_RED_INTEGER,        GL_BYTE,                           GL_R8I,                    WriteColor<R8S, GLint>            );
+    InsertFormatMapping(&map, GL_RED_INTEGER,        GL_UNSIGNED_SHORT,                 GL_R16UI,                  WriteColor<R16, GLuint>           );
+    InsertFormatMapping(&map, GL_RED_INTEGER,        GL_SHORT,                          GL_R16I,                   WriteColor<R16S, GLint>           );
+    InsertFormatMapping(&map, GL_RED_INTEGER,        GL_UNSIGNED_INT,                   GL_R32UI,                  WriteColor<R32, GLuint>           );
+    InsertFormatMapping(&map, GL_RED_INTEGER,        GL_INT,                            GL_R32I,                   WriteColor<R32S, GLint>           );
+
+    InsertFormatMapping(&map, GL_LUMINANCE_ALPHA,    GL_UNSIGNED_BYTE,                  GL_LUMINANCE8_ALPHA8_EXT,  WriteColor<L8A8, GLfloat>         );
+    InsertFormatMapping(&map, GL_LUMINANCE,          GL_UNSIGNED_BYTE,                  GL_LUMINANCE8_EXT,         WriteColor<L8, GLfloat>           );
+    InsertFormatMapping(&map, GL_ALPHA,              GL_UNSIGNED_BYTE,                  GL_ALPHA8_EXT,             WriteColor<A8, GLfloat>           );
+    InsertFormatMapping(&map, GL_LUMINANCE_ALPHA,    GL_FLOAT,                          GL_LUMINANCE_ALPHA32F_EXT, WriteColor<L32A32F, GLfloat>      );
+    InsertFormatMapping(&map, GL_LUMINANCE,          GL_FLOAT,                          GL_LUMINANCE32F_EXT,       WriteColor<L32F, GLfloat>         );
+    InsertFormatMapping(&map, GL_ALPHA,              GL_FLOAT,                          GL_ALPHA32F_EXT,           WriteColor<A32F, GLfloat>         );
+    InsertFormatMapping(&map, GL_LUMINANCE_ALPHA,    GL_HALF_FLOAT,                     GL_LUMINANCE_ALPHA16F_EXT, WriteColor<L16A16F, GLfloat>      );
+    InsertFormatMapping(&map, GL_LUMINANCE_ALPHA,    GL_HALF_FLOAT_OES,                 GL_LUMINANCE_ALPHA16F_EXT, WriteColor<L16A16F, GLfloat>      );
+    InsertFormatMapping(&map, GL_LUMINANCE,          GL_HALF_FLOAT,                     GL_LUMINANCE16F_EXT,       WriteColor<L16F, GLfloat>         );
+    InsertFormatMapping(&map, GL_LUMINANCE,          GL_HALF_FLOAT_OES,                 GL_LUMINANCE16F_EXT,       WriteColor<L16F, GLfloat>         );
+    InsertFormatMapping(&map, GL_ALPHA,              GL_HALF_FLOAT,                     GL_ALPHA16F_EXT,           WriteColor<A16F, GLfloat>         );
+    InsertFormatMapping(&map, GL_ALPHA,              GL_HALF_FLOAT_OES,                 GL_ALPHA16F_EXT,           WriteColor<A16F, GLfloat>         );
+
+    InsertFormatMapping(&map, GL_BGRA_EXT,           GL_UNSIGNED_BYTE,                  GL_BGRA8_EXT,              WriteColor<B8G8R8A8, GLfloat>     );
+    InsertFormatMapping(&map, GL_BGRA_EXT,           GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT, GL_BGRA4_ANGLEX,           WriteColor<B4G4R4A4, GLfloat>     );
+    InsertFormatMapping(&map, GL_BGRA_EXT,           GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT, GL_BGR5_A1_ANGLEX,         WriteColor<B5G5R5A1, GLfloat>     );
+
+    InsertFormatMapping(&map, GL_SRGB_EXT,           GL_UNSIGNED_BYTE,                  GL_SRGB8,                  WriteColor<R8G8B8, GLfloat>       );
+    InsertFormatMapping(&map, GL_SRGB_ALPHA_EXT,     GL_UNSIGNED_BYTE,                  GL_SRGB8_ALPHA8,           WriteColor<R8G8B8A8, GLfloat>     );
+
+    InsertFormatMapping(&map, GL_COMPRESSED_RGB_S3TC_DXT1_EXT,    GL_UNSIGNED_BYTE,     GL_COMPRESSED_RGB_S3TC_DXT1_EXT,    NULL                     );
+    InsertFormatMapping(&map, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,   GL_UNSIGNED_BYTE,     GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,   NULL                     );
+    InsertFormatMapping(&map, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE, GL_UNSIGNED_BYTE,     GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE, NULL                     );
+    InsertFormatMapping(&map, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE, GL_UNSIGNED_BYTE,     GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE, NULL                     );
+
+    InsertFormatMapping(&map, GL_DEPTH_COMPONENT,    GL_UNSIGNED_SHORT,                 GL_DEPTH_COMPONENT16,      NULL                              );
+    InsertFormatMapping(&map, GL_DEPTH_COMPONENT,    GL_UNSIGNED_INT,                   GL_DEPTH_COMPONENT32_OES,  NULL                              );
+    InsertFormatMapping(&map, GL_DEPTH_COMPONENT,    GL_FLOAT,                          GL_DEPTH_COMPONENT32F,     NULL                              );
+
+    InsertFormatMapping(&map, GL_STENCIL,            GL_UNSIGNED_BYTE,                  GL_STENCIL_INDEX8,         NULL                              );
+
+    InsertFormatMapping(&map, GL_DEPTH_STENCIL,      GL_UNSIGNED_INT_24_8,              GL_DEPTH24_STENCIL8,       NULL                              );
+    InsertFormatMapping(&map, GL_DEPTH_STENCIL,      GL_FLOAT_32_UNSIGNED_INT_24_8_REV, GL_DEPTH32F_STENCIL8,      NULL                              );
+
+    return map;
+}
+
+Type::Type()
+    : bytes(0),
+      specialInterpretation(false)
+{
+}
+
+// Map of sizes of input types
+typedef std::pair<GLenum, Type> TypeInfoPair;
+typedef std::map<GLenum, Type> TypeInfoMap;
+
+static inline void InsertTypeInfo(TypeInfoMap *map, GLenum type, GLuint bytes, bool specialInterpretation)
+{
+    Type info;
+    info.bytes = bytes;
+    info.specialInterpretation = specialInterpretation;
+
+    map->insert(std::make_pair(type, info));
+}
+
+bool operator<(const Type& a, const Type& b)
+{
+    return memcmp(&a, &b, sizeof(Type)) < 0;
+}
+
+static TypeInfoMap BuildTypeInfoMap()
+{
+    TypeInfoMap map;
+
+    InsertTypeInfo(&map, GL_UNSIGNED_BYTE,                  1, false);
+    InsertTypeInfo(&map, GL_BYTE,                           1, false);
+    InsertTypeInfo(&map, GL_UNSIGNED_SHORT,                 2, false);
+    InsertTypeInfo(&map, GL_SHORT,                          2, false);
+    InsertTypeInfo(&map, GL_UNSIGNED_INT,                   4, false);
+    InsertTypeInfo(&map, GL_INT,                            4, false);
+    InsertTypeInfo(&map, GL_HALF_FLOAT,                     2, false);
+    InsertTypeInfo(&map, GL_HALF_FLOAT_OES,                 2, false);
+    InsertTypeInfo(&map, GL_FLOAT,                          4, false);
+    InsertTypeInfo(&map, GL_UNSIGNED_SHORT_5_6_5,           2, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_SHORT_4_4_4_4,         2, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_SHORT_5_5_5_1,         2, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT, 2, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT, 2, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_INT_2_10_10_10_REV,    4, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_INT_24_8,              4, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_INT_10F_11F_11F_REV,   4, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_INT_5_9_9_9_REV,       4, true );
+    InsertTypeInfo(&map, GL_UNSIGNED_INT_24_8_OES,          4, true );
+    InsertTypeInfo(&map, GL_FLOAT_32_UNSIGNED_INT_24_8_REV, 8, true );
+
+    return map;
+}
+
+// Information about internal formats
+static bool AlwaysSupported(GLuint, const Extensions &)
+{
+    return true;
+}
+
+static bool UnimplementedSupport(GLuint, const Extensions &)
+{
+    return false;
+}
+
+static bool NeverSupported(GLuint, const Extensions &)
+{
+    return false;
+}
+
+template <GLuint minCoreGLVersion>
+static bool RequireES(GLuint clientVersion, const Extensions &)
+{
+    return clientVersion >= minCoreGLVersion;
+}
+
+// Pointer to a boolean memeber of the Extensions struct
+typedef bool(Extensions::*ExtensionBool);
+
+// Check support for a single extension
+template <ExtensionBool bool1>
+static bool RequireExt(GLuint, const Extensions & extensions)
+{
+    return extensions.*bool1;
+}
+
+// Check for a minimum client version or a single extension
+template <GLuint minCoreGLVersion, ExtensionBool bool1>
+static bool RequireESOrExt(GLuint clientVersion, const Extensions &extensions)
+{
+    return clientVersion >= minCoreGLVersion || extensions.*bool1;
+}
+
+// Check for a minimum client version or two extensions
+template <GLuint minCoreGLVersion, ExtensionBool bool1, ExtensionBool bool2>
+static bool RequireESOrExtAndExt(GLuint clientVersion, const Extensions &extensions)
+{
+    return clientVersion >= minCoreGLVersion || (extensions.*bool1 && extensions.*bool2);
+}
+
+// Check for a minimum client version or at least one of two extensions
+template <GLuint minCoreGLVersion, ExtensionBool bool1, ExtensionBool bool2>
+static bool RequireESOrExtOrExt(GLuint clientVersion, const Extensions &extensions)
+{
+    return clientVersion >= minCoreGLVersion || extensions.*bool1 || extensions.*bool2;
+}
+
+// Check support for two extensions
+template <ExtensionBool bool1, ExtensionBool bool2>
+static bool RequireExtAndExt(GLuint, const Extensions &extensions)
+{
+    return extensions.*bool1 && extensions.*bool2;
+}
+
+InternalFormat::InternalFormat()
+    : redBits(0),
+      greenBits(0),
+      blueBits(0),
+      luminanceBits(0),
+      alphaBits(0),
+      sharedBits(0),
+      depthBits(0),
+      stencilBits(0),
+      pixelBytes(0),
+      componentCount(0),
+      compressedBlockWidth(0),
+      compressedBlockHeight(0),
+      format(GL_NONE),
+      type(GL_NONE),
+      componentType(GL_NONE),
+      colorEncoding(GL_NONE),
+      compressed(false),
+      textureSupport(NeverSupported),
+      renderSupport(NeverSupported),
+      filterSupport(NeverSupported)
+{
+}
+
+static InternalFormat UnsizedFormat(GLenum format, InternalFormat::SupportCheckFunction textureSupport,
+                                    InternalFormat::SupportCheckFunction renderSupport,
+                                    InternalFormat::SupportCheckFunction filterSupport)
+{
+    InternalFormat formatInfo;
+    formatInfo.format = format;
+    formatInfo.textureSupport = textureSupport;
+    formatInfo.renderSupport = renderSupport;
+    formatInfo.filterSupport = filterSupport;
+    return formatInfo;
+}
+
+static InternalFormat RGBAFormat(GLuint red, GLuint green, GLuint blue, GLuint alpha, GLuint shared,
+                                 GLenum format, GLenum type, GLenum componentType, bool srgb,
+                                 InternalFormat::SupportCheckFunction textureSupport,
+                                 InternalFormat::SupportCheckFunction renderSupport,
+                                 InternalFormat::SupportCheckFunction filterSupport)
+{
+    InternalFormat formatInfo;
+    formatInfo.redBits = red;
+    formatInfo.greenBits = green;
+    formatInfo.blueBits = blue;
+    formatInfo.alphaBits = alpha;
+    formatInfo.sharedBits = shared;
+    formatInfo.pixelBytes = (red + green + blue + alpha + shared) / 8;
+    formatInfo.componentCount = ((red > 0) ? 1 : 0) + ((green > 0) ? 1 : 0) + ((blue > 0) ? 1 : 0) + ((alpha > 0) ? 1 : 0);
+    formatInfo.format = format;
+    formatInfo.type = type;
+    formatInfo.componentType = componentType;
+    formatInfo.colorEncoding = (srgb ? GL_SRGB : GL_LINEAR);
+    formatInfo.textureSupport = textureSupport;
+    formatInfo.renderSupport = renderSupport;
+    formatInfo.filterSupport = filterSupport;
+    return formatInfo;
+}
+
+static InternalFormat LUMAFormat(GLuint luminance, GLuint alpha, GLenum format, GLenum type, GLenum componentType,
+                                 InternalFormat::SupportCheckFunction textureSupport,
+                                 InternalFormat::SupportCheckFunction renderSupport,
+                                 InternalFormat::SupportCheckFunction filterSupport)
+{
+    InternalFormat formatInfo;
+    formatInfo.luminanceBits = luminance;
+    formatInfo.alphaBits = alpha;
+    formatInfo.pixelBytes = (luminance + alpha) / 8;
+    formatInfo.componentCount = ((luminance > 0) ? 1 : 0) + ((alpha > 0) ? 1 : 0);
+    formatInfo.format = format;
+    formatInfo.type = type;
+    formatInfo.componentType = componentType;
+    formatInfo.colorEncoding = GL_LINEAR;
+    formatInfo.textureSupport = textureSupport;
+    formatInfo.renderSupport = renderSupport;
+    formatInfo.filterSupport = filterSupport;
+    return formatInfo;
+}
+
+static InternalFormat DepthStencilFormat(GLuint depthBits, GLuint stencilBits, GLuint unusedBits, GLenum format,
+                                         GLenum type, GLenum componentType, InternalFormat::SupportCheckFunction textureSupport,
+                                         InternalFormat::SupportCheckFunction renderSupport,
+                                         InternalFormat::SupportCheckFunction filterSupport)
+{
+    InternalFormat formatInfo;
+    formatInfo.depthBits = depthBits;
+    formatInfo.stencilBits = stencilBits;
+    formatInfo.pixelBytes = (depthBits + stencilBits + unusedBits) / 8;
+    formatInfo.componentCount = ((depthBits > 0) ? 1 : 0) + ((stencilBits > 0) ? 1 : 0);
+    formatInfo.format = format;
+    formatInfo.type = type;
+    formatInfo.componentType = componentType;
+    formatInfo.colorEncoding = GL_LINEAR;
+    formatInfo.textureSupport = textureSupport;
+    formatInfo.renderSupport = renderSupport;
+    formatInfo.filterSupport = filterSupport;
+    return formatInfo;
+}
+
+static InternalFormat CompressedFormat(GLuint compressedBlockWidth, GLuint compressedBlockHeight, GLuint compressedBlockSize,
+                                       GLuint componentCount, GLenum format, GLenum type, bool srgb,
+                                       InternalFormat::SupportCheckFunction textureSupport,
+                                       InternalFormat::SupportCheckFunction renderSupport,
+                                       InternalFormat::SupportCheckFunction filterSupport)
+{
+    InternalFormat formatInfo;
+    formatInfo.compressedBlockWidth = compressedBlockWidth;
+    formatInfo.compressedBlockHeight = compressedBlockHeight;
+    formatInfo.pixelBytes = compressedBlockSize / 8;
+    formatInfo.componentCount = componentCount;
+    formatInfo.format = format;
+    formatInfo.type = type;
+    formatInfo.componentType = GL_UNSIGNED_NORMALIZED;
+    formatInfo.colorEncoding = (srgb ? GL_SRGB : GL_LINEAR);
+    formatInfo.compressed = true;
+    formatInfo.textureSupport = textureSupport;
+    formatInfo.renderSupport = renderSupport;
+    formatInfo.filterSupport = filterSupport;
+    return formatInfo;
+}
+
+typedef std::pair<GLenum, InternalFormat> InternalFormatInfoPair;
+typedef std::map<GLenum, InternalFormat> InternalFormatInfoMap;
+
+static InternalFormatInfoMap BuildInternalFormatInfoMap()
+{
+    InternalFormatInfoMap map;
+
+    // From ES 3.0.1 spec, table 3.12
+    map.insert(InternalFormatInfoPair(GL_NONE,              InternalFormat()));
+
+    //                               | Internal format     |          | R | G | B | A |S | Format         | Type                           | Component type        | SRGB | Texture supported                        | Renderable                               | Filterable    |
+    map.insert(InternalFormatInfoPair(GL_R8,                RGBAFormat( 8,  0,  0,  0, 0, GL_RED,          GL_UNSIGNED_BYTE,                GL_UNSIGNED_NORMALIZED, false, RequireESOrExt<3, &Extensions::textureRG>, RequireESOrExt<3, &Extensions::textureRG>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_R8_SNORM,          RGBAFormat( 8,  0,  0,  0, 0, GL_RED,          GL_BYTE,                         GL_SIGNED_NORMALIZED,   false, RequireES<3>,                              NeverSupported,                            AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG8,               RGBAFormat( 8,  8,  0,  0, 0, GL_RG,           GL_UNSIGNED_BYTE,                GL_UNSIGNED_NORMALIZED, false, RequireESOrExt<3, &Extensions::textureRG>, RequireESOrExt<3, &Extensions::textureRG>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG8_SNORM,         RGBAFormat( 8,  8,  0,  0, 0, GL_RG,           GL_BYTE,                         GL_SIGNED_NORMALIZED,   false, RequireES<3>,                              NeverSupported,                            AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB8,              RGBAFormat( 8,  8,  8,  0, 0, GL_RGB,          GL_UNSIGNED_BYTE,                GL_UNSIGNED_NORMALIZED, false, RequireESOrExt<3, &Extensions::rgb8rgba8>, RequireESOrExt<3, &Extensions::rgb8rgba8>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB8_SNORM,        RGBAFormat( 8,  8,  8,  0, 0, GL_RGB,          GL_BYTE,                         GL_SIGNED_NORMALIZED,   false, RequireES<3>,                              NeverSupported,                            AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB565,            RGBAFormat( 5,  6,  5,  0, 0, GL_RGB,          GL_UNSIGNED_SHORT_5_6_5,         GL_UNSIGNED_NORMALIZED, false, RequireES<2>,                              RequireES<2>,                              AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA4,             RGBAFormat( 4,  4,  4,  4, 0, GL_RGBA,         GL_UNSIGNED_SHORT_4_4_4_4,       GL_UNSIGNED_NORMALIZED, false, RequireES<2>,                              RequireES<2>,                              AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB5_A1,           RGBAFormat( 5,  5,  5,  1, 0, GL_RGBA,         GL_UNSIGNED_SHORT_5_5_5_1,       GL_UNSIGNED_NORMALIZED, false, RequireES<2>,                              RequireES<2>,                              AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA8,             RGBAFormat( 8,  8,  8,  8, 0, GL_RGBA,         GL_UNSIGNED_BYTE,                GL_UNSIGNED_NORMALIZED, false, RequireESOrExt<3, &Extensions::rgb8rgba8>, RequireESOrExt<3, &Extensions::rgb8rgba8>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA8_SNORM,       RGBAFormat( 8,  8,  8,  8, 0, GL_RGBA,         GL_BYTE,                         GL_SIGNED_NORMALIZED,   false, RequireES<3>,                              NeverSupported,                            AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB10_A2,          RGBAFormat(10, 10, 10,  2, 0, GL_RGBA,         GL_UNSIGNED_INT_2_10_10_10_REV,  GL_UNSIGNED_NORMALIZED, false, RequireES<3>,                              RequireES<3>,                              AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB10_A2UI,        RGBAFormat(10, 10, 10,  2, 0, GL_RGBA_INTEGER, GL_UNSIGNED_INT_2_10_10_10_REV,  GL_UNSIGNED_INT,        false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_SRGB8,             RGBAFormat( 8,  8,  8,  0, 0, GL_RGB,          GL_UNSIGNED_BYTE,                GL_UNSIGNED_NORMALIZED, true,  RequireESOrExt<3, &Extensions::sRGB>,      NeverSupported,                            AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_SRGB8_ALPHA8,      RGBAFormat( 8,  8,  8,  8, 0, GL_RGBA,         GL_UNSIGNED_BYTE,                GL_UNSIGNED_NORMALIZED, true,  RequireESOrExt<3, &Extensions::sRGB>,      RequireESOrExt<3, &Extensions::sRGB>,      AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_R11F_G11F_B10F,    RGBAFormat(11, 11, 10,  0, 0, GL_RGB,          GL_UNSIGNED_INT_10F_11F_11F_REV, GL_FLOAT,               false, RequireES<3>,                              RequireExt<&Extensions::colorBufferFloat>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB9_E5,           RGBAFormat( 9,  9,  9,  0, 5, GL_RGB,          GL_UNSIGNED_INT_5_9_9_9_REV,     GL_FLOAT,               false, RequireES<3>,                              NeverSupported,                            AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_R8I,               RGBAFormat( 8,  0,  0,  0, 0, GL_RED_INTEGER,  GL_BYTE,                         GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_R8UI,              RGBAFormat( 8,  0,  0,  0, 0, GL_RED_INTEGER,  GL_UNSIGNED_BYTE,                GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_R16I,              RGBAFormat(16,  0,  0,  0, 0, GL_RED_INTEGER,  GL_SHORT,                        GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_R16UI,             RGBAFormat(16,  0,  0,  0, 0, GL_RED_INTEGER,  GL_UNSIGNED_SHORT,               GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_R32I,              RGBAFormat(32,  0,  0,  0, 0, GL_RED_INTEGER,  GL_INT,                          GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_R32UI,             RGBAFormat(32,  0,  0,  0, 0, GL_RED_INTEGER,  GL_UNSIGNED_INT,                 GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG8I,              RGBAFormat( 8,  8,  0,  0, 0, GL_RG_INTEGER,   GL_BYTE,                         GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG8UI,             RGBAFormat( 8,  8,  0,  0, 0, GL_RG_INTEGER,   GL_UNSIGNED_BYTE,                GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG16I,             RGBAFormat(16, 16,  0,  0, 0, GL_RG_INTEGER,   GL_SHORT,                        GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG16UI,            RGBAFormat(16, 16,  0,  0, 0, GL_RG_INTEGER,   GL_UNSIGNED_SHORT,               GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG32I,             RGBAFormat(32, 32,  0,  0, 0, GL_RG_INTEGER,   GL_INT,                          GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG32UI,            RGBAFormat(32, 32,  0,  0, 0, GL_RG_INTEGER,   GL_UNSIGNED_INT,                 GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB8I,             RGBAFormat( 8,  8,  8,  0, 0, GL_RGB_INTEGER,  GL_BYTE,                         GL_INT,                 false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB8UI,            RGBAFormat( 8,  8,  8,  0, 0, GL_RGB_INTEGER,  GL_UNSIGNED_BYTE,                GL_UNSIGNED_INT,        false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB16I,            RGBAFormat(16, 16, 16,  0, 0, GL_RGB_INTEGER,  GL_SHORT,                        GL_INT,                 false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB16UI,           RGBAFormat(16, 16, 16,  0, 0, GL_RGB_INTEGER,  GL_UNSIGNED_SHORT,               GL_UNSIGNED_INT,        false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB32I,            RGBAFormat(32, 32, 32,  0, 0, GL_RGB_INTEGER,  GL_INT,                          GL_INT,                 false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB32UI,           RGBAFormat(32, 32, 32,  0, 0, GL_RGB_INTEGER,  GL_UNSIGNED_INT,                 GL_UNSIGNED_INT,        false, RequireES<3>,                              NeverSupported,                            NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA8I,            RGBAFormat( 8,  8,  8,  8, 0, GL_RGBA_INTEGER, GL_BYTE,                         GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA8UI,           RGBAFormat( 8,  8,  8,  8, 0, GL_RGBA_INTEGER, GL_UNSIGNED_BYTE,                GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA16I,           RGBAFormat(16, 16, 16, 16, 0, GL_RGBA_INTEGER, GL_SHORT,                        GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA16UI,          RGBAFormat(16, 16, 16, 16, 0, GL_RGBA_INTEGER, GL_UNSIGNED_SHORT,               GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA32I,           RGBAFormat(32, 32, 32, 32, 0, GL_RGBA_INTEGER, GL_INT,                          GL_INT,                 false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA32UI,          RGBAFormat(32, 32, 32, 32, 0, GL_RGBA_INTEGER, GL_UNSIGNED_INT,                 GL_UNSIGNED_INT,        false, RequireES<3>,                              RequireES<3>,                              NeverSupported)));
+
+    map.insert(InternalFormatInfoPair(GL_BGRA8_EXT,         RGBAFormat( 8,  8,  8,  8, 0, GL_BGRA_EXT,     GL_UNSIGNED_BYTE,                  GL_UNSIGNED_NORMALIZED, false, RequireExt<&Extensions::textureFormatBGRA8888>, RequireExt<&Extensions::textureFormatBGRA8888>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_BGRA4_ANGLEX,      RGBAFormat( 4,  4,  4,  4, 0, GL_BGRA_EXT,     GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT, GL_UNSIGNED_NORMALIZED, false, RequireExt<&Extensions::textureFormatBGRA8888>, RequireExt<&Extensions::textureFormatBGRA8888>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_BGR5_A1_ANGLEX,    RGBAFormat( 5,  5,  5,  1, 0, GL_BGRA_EXT,     GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT, GL_UNSIGNED_NORMALIZED, false, RequireExt<&Extensions::textureFormatBGRA8888>, RequireExt<&Extensions::textureFormatBGRA8888>, AlwaysSupported)));
+
+    // Floating point renderability and filtering is provided by OES_texture_float and OES_texture_half_float
+    //                               | Internal format     |          | D |S | Format             | Type                                   | Comp   | SRGB |  Texture supported                                                             | Renderable                                                                    | Filterable                                    |
+    //                               |                     |          |   |  |                    |                                        | type   |      |                                                                                |                                                                               |                                               |
+    map.insert(InternalFormatInfoPair(GL_R16F,              RGBAFormat(16,  0,  0,  0, 0, GL_RED,          GL_HALF_FLOAT,                   GL_FLOAT, false, RequireESOrExtAndExt<3, &Extensions::textureHalfFloat, &Extensions::textureRG>, RequireESOrExtAndExt<3, &Extensions::textureHalfFloat, &Extensions::textureRG>, RequireExt<&Extensions::textureHalfFloatLinear>)));
+    map.insert(InternalFormatInfoPair(GL_RG16F,             RGBAFormat(16, 16,  0,  0, 0, GL_RG,           GL_HALF_FLOAT,                   GL_FLOAT, false, RequireESOrExtAndExt<3, &Extensions::textureHalfFloat, &Extensions::textureRG>, RequireESOrExtAndExt<3, &Extensions::textureHalfFloat, &Extensions::textureRG>, RequireExt<&Extensions::textureHalfFloatLinear>)));
+    map.insert(InternalFormatInfoPair(GL_RGB16F,            RGBAFormat(16, 16, 16,  0, 0, GL_RGB,          GL_HALF_FLOAT,                   GL_FLOAT, false, RequireESOrExt<3, &Extensions::textureHalfFloat>,                               RequireESOrExt<3, &Extensions::textureHalfFloat>,                               RequireExt<&Extensions::textureHalfFloatLinear>)));
+    map.insert(InternalFormatInfoPair(GL_RGBA16F,           RGBAFormat(16, 16, 16, 16, 0, GL_RGBA,         GL_HALF_FLOAT,                   GL_FLOAT, false, RequireESOrExt<3, &Extensions::textureHalfFloat>,                               RequireESOrExt<3, &Extensions::textureHalfFloat>,                               RequireExt<&Extensions::textureHalfFloatLinear>)));
+    map.insert(InternalFormatInfoPair(GL_R32F,              RGBAFormat(32,  0,  0,  0, 0, GL_RED,          GL_FLOAT,                        GL_FLOAT, false, RequireESOrExtAndExt<3, &Extensions::textureFloat, &Extensions::textureRG>,     RequireESOrExtAndExt<3, &Extensions::textureFloat, &Extensions::textureRG>,     RequireExt<&Extensions::textureFloatLinear>    )));
+    map.insert(InternalFormatInfoPair(GL_RG32F,             RGBAFormat(32, 32,  0,  0, 0, GL_RG,           GL_FLOAT,                        GL_FLOAT, false, RequireESOrExtAndExt<3, &Extensions::textureFloat, &Extensions::textureRG>,     RequireESOrExtAndExt<3, &Extensions::textureFloat, &Extensions::textureRG>,     RequireExt<&Extensions::textureFloatLinear>    )));
+    map.insert(InternalFormatInfoPair(GL_RGB32F,            RGBAFormat(32, 32, 32,  0, 0, GL_RGB,          GL_FLOAT,                        GL_FLOAT, false, RequireESOrExt<3, &Extensions::textureFloat>,                                   RequireESOrExt<3, &Extensions::textureFloat>,                                   RequireExt<&Extensions::textureFloatLinear>    )));
+    map.insert(InternalFormatInfoPair(GL_RGBA32F,           RGBAFormat(32, 32, 32, 32, 0, GL_RGBA,         GL_FLOAT,                        GL_FLOAT, false, RequireESOrExt<3, &Extensions::textureFloat>,                                   RequireESOrExt<3, &Extensions::textureFloat>,                                   RequireExt<&Extensions::textureFloatLinear>    )));
+
+    // Depth stencil formats
+    //                               | Internal format         |                  | D |S | X | Format            | Type                             | Component type        | Supported                                    | Renderable                                                                         | Filterable                                  |
+    map.insert(InternalFormatInfoPair(GL_DEPTH_COMPONENT16,     DepthStencilFormat(16, 0,  0, GL_DEPTH_COMPONENT, GL_UNSIGNED_SHORT,                 GL_UNSIGNED_NORMALIZED, RequireES<2>,                                  RequireES<2>,                                                                        RequireESOrExt<3, &Extensions::depthTextures>)));
+    map.insert(InternalFormatInfoPair(GL_DEPTH_COMPONENT24,     DepthStencilFormat(24, 0,  0, GL_DEPTH_COMPONENT, GL_UNSIGNED_INT,                   GL_UNSIGNED_NORMALIZED, RequireES<3>,                                  RequireES<3>,                                                                        RequireESOrExt<3, &Extensions::depthTextures>)));
+    map.insert(InternalFormatInfoPair(GL_DEPTH_COMPONENT32F,    DepthStencilFormat(32, 0,  0, GL_DEPTH_COMPONENT, GL_FLOAT,                          GL_FLOAT,               RequireES<3>,                                  RequireES<3>,                                                                        RequireESOrExt<3, &Extensions::depthTextures>)));
+    map.insert(InternalFormatInfoPair(GL_DEPTH_COMPONENT32_OES, DepthStencilFormat(32, 0,  0, GL_DEPTH_COMPONENT, GL_UNSIGNED_INT,                   GL_UNSIGNED_NORMALIZED, RequireExt<&Extensions::depthTextures>,        RequireExt<&Extensions::depthTextures>,                                              AlwaysSupported                              )));
+    map.insert(InternalFormatInfoPair(GL_DEPTH24_STENCIL8,      DepthStencilFormat(24, 8,  0, GL_DEPTH_STENCIL,   GL_UNSIGNED_INT_24_8,              GL_UNSIGNED_NORMALIZED, RequireESOrExt<3, &Extensions::depthTextures>, RequireESOrExtOrExt<3, &Extensions::depthTextures, &Extensions::packedDepthStencil>, AlwaysSupported                              )));
+    map.insert(InternalFormatInfoPair(GL_DEPTH32F_STENCIL8,     DepthStencilFormat(32, 8, 24, GL_DEPTH_STENCIL,   GL_FLOAT_32_UNSIGNED_INT_24_8_REV, GL_FLOAT,               RequireES<3>,                                  RequireES<3>,                                                                        AlwaysSupported                              )));
+    map.insert(InternalFormatInfoPair(GL_STENCIL_INDEX8,        DepthStencilFormat( 0, 8,  0, GL_DEPTH_STENCIL,   GL_UNSIGNED_BYTE,                  GL_UNSIGNED_INT,        RequireES<2>,                                  RequireES<2>,                                                                        NeverSupported                               )));
+
+    // Luminance alpha formats
+    //                               | Internal format          |          | L | A | Format            | Type            | Component type        | Supported                                                                    | Renderable    | Filterable    |
+    map.insert(InternalFormatInfoPair(GL_ALPHA8_EXT,             LUMAFormat( 0,  8, GL_ALPHA,           GL_UNSIGNED_BYTE, GL_UNSIGNED_NORMALIZED, RequireExt<&Extensions::textureStorage>,                                      NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE8_EXT,         LUMAFormat( 8,  0, GL_LUMINANCE,       GL_UNSIGNED_BYTE, GL_UNSIGNED_NORMALIZED, RequireExt<&Extensions::textureStorage>,                                      NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_ALPHA32F_EXT,           LUMAFormat( 0, 32, GL_ALPHA,           GL_FLOAT,         GL_FLOAT,               RequireExtAndExt<&Extensions::textureStorage, &Extensions::textureFloat>,     NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE32F_EXT,       LUMAFormat(32,  0, GL_LUMINANCE,       GL_FLOAT,         GL_FLOAT,               RequireExtAndExt<&Extensions::textureStorage, &Extensions::textureFloat>,     NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_ALPHA16F_EXT,           LUMAFormat( 0, 16, GL_ALPHA,           GL_HALF_FLOAT,    GL_FLOAT,               RequireExtAndExt<&Extensions::textureStorage, &Extensions::textureHalfFloat>, NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE16F_EXT,       LUMAFormat(16,  0, GL_LUMINANCE,       GL_HALF_FLOAT,    GL_FLOAT,               RequireExtAndExt<&Extensions::textureStorage, &Extensions::textureHalfFloat>, NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE8_ALPHA8_EXT,  LUMAFormat( 8,  8, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, GL_UNSIGNED_NORMALIZED, RequireExt<&Extensions::textureStorage>,                                      NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE_ALPHA32F_EXT, LUMAFormat(32, 32, GL_LUMINANCE_ALPHA, GL_FLOAT,         GL_FLOAT,               RequireExtAndExt<&Extensions::textureStorage, &Extensions::textureFloat>,     NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE_ALPHA16F_EXT, LUMAFormat(16, 16, GL_LUMINANCE_ALPHA, GL_HALF_FLOAT,    GL_FLOAT,               RequireExtAndExt<&Extensions::textureStorage, &Extensions::textureHalfFloat>, NeverSupported, AlwaysSupported)));
+
+    // Unsized formats
+    //                               | Internal format   |             | Format            | Supported                                         | Renderable                                        | Filterable    |
+    map.insert(InternalFormatInfoPair(GL_ALPHA,           UnsizedFormat(GL_ALPHA,           RequireES<2>,                                       NeverSupported,                                     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE,       UnsizedFormat(GL_LUMINANCE,       RequireES<2>,                                       NeverSupported,                                     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_LUMINANCE_ALPHA, UnsizedFormat(GL_LUMINANCE_ALPHA, RequireES<2>,                                       NeverSupported,                                     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RED,             UnsizedFormat(GL_RED,             RequireESOrExt<3, &Extensions::textureRG>,          NeverSupported,                                     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RG,              UnsizedFormat(GL_RG,              RequireESOrExt<3, &Extensions::textureRG>,          NeverSupported,                                     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGB,             UnsizedFormat(GL_RGB,             RequireES<2>,                                       RequireES<2>,                                       AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RGBA,            UnsizedFormat(GL_RGBA,            RequireES<2>,                                       RequireES<2>,                                       AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_RED_INTEGER,     UnsizedFormat(GL_RED_INTEGER,     RequireES<3>,                                       NeverSupported,                                     NeverSupported )));
+    map.insert(InternalFormatInfoPair(GL_RG_INTEGER,      UnsizedFormat(GL_RG_INTEGER,      RequireES<3>,                                       NeverSupported,                                     NeverSupported )));
+    map.insert(InternalFormatInfoPair(GL_RGB_INTEGER,     UnsizedFormat(GL_RGB_INTEGER,     RequireES<3>,                                       NeverSupported,                                     NeverSupported )));
+    map.insert(InternalFormatInfoPair(GL_RGBA_INTEGER,    UnsizedFormat(GL_RGBA_INTEGER,    RequireES<3>,                                       NeverSupported,                                     NeverSupported )));
+    map.insert(InternalFormatInfoPair(GL_BGRA_EXT,        UnsizedFormat(GL_BGRA_EXT,        RequireExt<&Extensions::textureFormatBGRA8888>,     RequireExt<&Extensions::textureFormatBGRA8888>,     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_DEPTH_COMPONENT, UnsizedFormat(GL_DEPTH_COMPONENT, RequireES<2>,                                       RequireES<2>,                                       AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_DEPTH_STENCIL,   UnsizedFormat(GL_DEPTH_STENCIL,   RequireESOrExt<3, &Extensions::packedDepthStencil>, RequireESOrExt<3, &Extensions::packedDepthStencil>, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_SRGB_EXT,        UnsizedFormat(GL_RGB,             RequireESOrExt<3, &Extensions::sRGB>,               NeverSupported,                                     AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_SRGB_ALPHA_EXT,  UnsizedFormat(GL_RGBA,            RequireESOrExt<3, &Extensions::sRGB>,               RequireESOrExt<3, &Extensions::sRGB>,               AlwaysSupported)));
+
+    // Compressed formats, From ES 3.0.1 spec, table 3.16
+    //                               | Internal format                             |                |W |H | BS |CC| Format                                      | Type            | SRGB | Supported          | Renderable           | Filterable         |
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_R11_EAC,                        CompressedFormat(4, 4,  64, 1, GL_COMPRESSED_R11_EAC,                        GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_SIGNED_R11_EAC,                 CompressedFormat(4, 4,  64, 1, GL_COMPRESSED_SIGNED_R11_EAC,                 GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RG11_EAC,                       CompressedFormat(4, 4, 128, 2, GL_COMPRESSED_RG11_EAC,                       GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_SIGNED_RG11_EAC,                CompressedFormat(4, 4, 128, 2, GL_COMPRESSED_SIGNED_RG11_EAC,                GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGB8_ETC2,                      CompressedFormat(4, 4,  64, 3, GL_COMPRESSED_RGB8_ETC2,                      GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_SRGB8_ETC2,                     CompressedFormat(4, 4,  64, 3, GL_COMPRESSED_SRGB8_ETC2,                     GL_UNSIGNED_BYTE, true,  UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2,  CompressedFormat(4, 4,  64, 3, GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2,  GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2, CompressedFormat(4, 4,  64, 3, GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2, GL_UNSIGNED_BYTE, true,  UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGBA8_ETC2_EAC,                 CompressedFormat(4, 4, 128, 4, GL_COMPRESSED_RGBA8_ETC2_EAC,                 GL_UNSIGNED_BYTE, false, UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC,          CompressedFormat(4, 4, 128, 4, GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC,          GL_UNSIGNED_BYTE, true,  UnimplementedSupport, UnimplementedSupport, UnimplementedSupport)));
+
+    // From GL_EXT_texture_compression_dxt1
+    //                               | Internal format                   |                |W |H | BS |CC| Format                            | Type            | SRGB | Supported                                      | Renderable    | Filterable    |
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGB_S3TC_DXT1_EXT,    CompressedFormat(4, 4,  64, 3, GL_COMPRESSED_RGB_S3TC_DXT1_EXT,    GL_UNSIGNED_BYTE, false, RequireExt<&Extensions::textureCompressionDXT1>, NeverSupported, AlwaysSupported)));
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,   CompressedFormat(4, 4,  64, 4, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,   GL_UNSIGNED_BYTE, false, RequireExt<&Extensions::textureCompressionDXT1>, NeverSupported, AlwaysSupported)));
+
+    // From GL_ANGLE_texture_compression_dxt3
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE, CompressedFormat(4, 4, 128, 4, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE, GL_UNSIGNED_BYTE, false, RequireExt<&Extensions::textureCompressionDXT5>, NeverSupported, AlwaysSupported)));
+
+    // From GL_ANGLE_texture_compression_dxt5
+    map.insert(InternalFormatInfoPair(GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE, CompressedFormat(4, 4, 128, 4, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE, GL_UNSIGNED_BYTE, false, RequireExt<&Extensions::textureCompressionDXT5>, NeverSupported, AlwaysSupported)));
+
+    return map;
+}
+
+static const InternalFormatInfoMap &GetInternalFormatMap()
+{
+    static const InternalFormatInfoMap formatMap = BuildInternalFormatInfoMap();
+    return formatMap;
+}
+
+static FormatSet BuildAllSizedInternalFormatSet()
+{
+    FormatSet result;
+
+    const InternalFormatInfoMap &formats = GetInternalFormatMap();
+    for (InternalFormatInfoMap::const_iterator i = formats.begin(); i != formats.end(); i++)
+    {
+        if (i->second.pixelBytes > 0)
+        {
+            result.insert(i->first);
+        }
+    }
+
+    return result;
+}
+
+const FormatType &GetFormatTypeInfo(GLenum format, GLenum type)
+{
+    static const FormatMap formatMap = BuildFormatMap();
+    FormatMap::const_iterator iter = formatMap.find(FormatTypePair(format, type));
+    if (iter != formatMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const FormatType defaultInfo;
+        return defaultInfo;
+    }
+}
+
+const Type &GetTypeInfo(GLenum type)
+{
+    static const TypeInfoMap infoMap = BuildTypeInfoMap();
+    TypeInfoMap::const_iterator iter = infoMap.find(type);
+    if (iter != infoMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const Type defaultInfo;
+        return defaultInfo;
+    }
+}
+
+const InternalFormat &GetInternalFormatInfo(GLenum internalFormat)
+{
+    const InternalFormatInfoMap &formatMap = GetInternalFormatMap();
+    InternalFormatInfoMap::const_iterator iter = formatMap.find(internalFormat);
+    if (iter != formatMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const InternalFormat defaultInternalFormat;
+        return defaultInternalFormat;
+    }
+}
+
+GLuint InternalFormat::computeRowPitch(GLenum type, GLsizei width, GLint alignment) const
+{
+    ASSERT(alignment > 0 && isPow2(alignment));
+    return rx::roundUp(computeBlockSize(type, width, 1), static_cast<GLuint>(alignment));
+}
+
+GLuint InternalFormat::computeDepthPitch(GLenum type, GLsizei width, GLsizei height, GLint alignment) const
+{
+    return computeRowPitch(type, width, alignment) * height;
+}
+
+GLuint InternalFormat::computeBlockSize(GLenum type, GLsizei width, GLsizei height) const
+{
+    if (compressed)
+    {
+        GLsizei numBlocksWide = (width + compressedBlockWidth - 1) / compressedBlockWidth;
+        GLsizei numBlocksHight = (height + compressedBlockHeight - 1) / compressedBlockHeight;
+        return (pixelBytes * numBlocksWide * numBlocksHight);
+    }
+    else
+    {
+        const Type &typeInfo = GetTypeInfo(type);
+        if (typeInfo.specialInterpretation)
+        {
+            return typeInfo.bytes * width * height;
+        }
+        else
+        {
+            return componentCount * typeInfo.bytes * width * height;
+        }
+    }
+}
+
+GLenum GetSizedInternalFormat(GLenum internalFormat, GLenum type)
+{
+    const InternalFormat& formatInfo = GetInternalFormatInfo(internalFormat);
+    return (formatInfo.pixelBytes > 0) ? internalFormat : GetFormatTypeInfo(internalFormat, type).internalFormat;
+}
+
+const FormatSet &GetAllSizedInternalFormats()
+{
+    static FormatSet formatSet = BuildAllSizedInternalFormatSet();
+    return formatSet;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/formatutils.h b/src/3rdparty/angle/src/libGLESv2/formatutils.h
new file mode 100644
index 0000000000..25106a52e5
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/formatutils.h
@@ -0,0 +1,106 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// formatutils.h: Queries for GL image formats.
+
+#ifndef LIBGLESV2_FORMATUTILS_H_
+#define LIBGLESV2_FORMATUTILS_H_
+
+#include "libGLESv2/Caps.h"
+#include "libGLESv2/angletypes.h"
+
+#include "angle_gl.h"
+
+#include <cstddef>
+#include <cstdint>
+
+typedef void (*MipGenerationFunction)(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                                      const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                                      uint8_t *destData, size_t destRowPitch, size_t destDepthPitch);
+
+typedef void (*LoadImageFunction)(size_t width, size_t height, size_t depth,
+                                  const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                                  uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+typedef void (*InitializeTextureDataFunction)(size_t width, size_t height, size_t depth,
+                                              uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+typedef void (*ColorReadFunction)(const uint8_t *source, uint8_t *dest);
+typedef void (*ColorWriteFunction)(const uint8_t *source, uint8_t *dest);
+typedef void (*ColorCopyFunction)(const uint8_t *source, uint8_t *dest);
+
+typedef void (*VertexCopyFunction)(const uint8_t *input, size_t stride, size_t count, uint8_t *output);
+
+namespace gl
+{
+
+struct FormatType
+{
+    FormatType();
+
+    GLenum internalFormat;
+    ColorWriteFunction colorWriteFunction;
+};
+const FormatType &GetFormatTypeInfo(GLenum format, GLenum type);
+
+struct Type
+{
+    Type();
+
+    GLuint bytes;
+    bool specialInterpretation;
+};
+const Type &GetTypeInfo(GLenum type);
+
+struct InternalFormat
+{
+    InternalFormat();
+
+    GLuint redBits;
+    GLuint greenBits;
+    GLuint blueBits;
+
+    GLuint luminanceBits;
+
+    GLuint alphaBits;
+    GLuint sharedBits;
+
+    GLuint depthBits;
+    GLuint stencilBits;
+
+    GLuint pixelBytes;
+
+    GLuint componentCount;
+
+    bool compressed;
+    GLuint compressedBlockWidth;
+    GLuint compressedBlockHeight;
+
+    GLenum format;
+    GLenum type;
+
+    GLenum componentType;
+    GLenum colorEncoding;
+
+    typedef bool (*SupportCheckFunction)(GLuint, const Extensions &);
+    SupportCheckFunction textureSupport;
+    SupportCheckFunction renderSupport;
+    SupportCheckFunction filterSupport;
+
+    GLuint computeRowPitch(GLenum type, GLsizei width, GLint alignment) const;
+    GLuint computeDepthPitch(GLenum type, GLsizei width, GLsizei height, GLint alignment) const;
+    GLuint computeBlockSize(GLenum type, GLsizei width, GLsizei height) const;
+};
+const InternalFormat &GetInternalFormatInfo(GLenum internalFormat);
+
+GLenum GetSizedInternalFormat(GLenum internalFormat, GLenum type);
+
+typedef std::set<GLenum> FormatSet;
+const FormatSet &GetAllSizedInternalFormats();
+
+}
+
+#endif // LIBGLESV2_FORMATUTILS_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp b/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
index 814dfbf965..07f5d47473 100644
--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
@@ -1,16 +1,20 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 // libGLESv2.cpp: Implements the exported OpenGL ES 2.0 functions.
 
+#undef GL_APICALL
+#define GL_APICALL
+#define GL_GLEXT_PROTOTYPES
+
 #include "common/version.h"
+#include "common/utilities.h"
 
 #include "libGLESv2/main.h"
-#include "libGLESv2/utilities.h"
+#include "libGLESv2/formatutils.h"
 #include "libGLESv2/Buffer.h"
 #include "libGLESv2/Fence.h"
 #include "libGLESv2/Framebuffer.h"
@@ -20,263 +24,36 @@
 #include "libGLESv2/Texture.h"
 #include "libGLESv2/Query.h"
 #include "libGLESv2/Context.h"
+#include "libGLESv2/VertexArray.h"
+#include "libGLESv2/VertexAttribute.h"
+#include "libGLESv2/TransformFeedback.h"
+#include "libGLESv2/FramebufferAttachment.h"
 
-bool validImageSize(GLint level, GLsizei width, GLsizei height)
-{
-    if (level < 0 || width < 0 || height < 0)
-    {
-        return false;
-    }
-
-    if (gl::getContext() && gl::getContext()->supportsNonPower2Texture())
-    {
-        return true;
-    }
-
-    if (level == 0)
-    {
-        return true;
-    }
-
-    if (gl::isPow2(width) && gl::isPow2(height))
-    {
-        return true;
-    }
-
-    return false;
-}
-
-// Verify that format/type are one of the combinations from table 3.4.
-bool checkTextureFormatType(GLenum format, GLenum type)
-{
-    // validate <format> by itself (used as secondary key below)
-    switch (format)
-    {
-      case GL_RGBA:
-      case GL_BGRA_EXT:
-      case GL_RGB:
-      case GL_ALPHA:
-      case GL_LUMINANCE:
-      case GL_LUMINANCE_ALPHA:
-      case GL_DEPTH_COMPONENT:
-      case GL_DEPTH_STENCIL_OES:
-        break;
-      default:
-        return gl::error(GL_INVALID_ENUM, false);
-    }
-
-    // invalid <type> -> sets INVALID_ENUM
-    // invalid <format>+<type> combination -> sets INVALID_OPERATION
-    switch (type)
-    {
-      case GL_UNSIGNED_BYTE:
-        switch (format)
-        {
-          case GL_RGBA:
-          case GL_BGRA_EXT:
-          case GL_RGB:
-          case GL_ALPHA:
-          case GL_LUMINANCE:
-          case GL_LUMINANCE_ALPHA:
-            return true;
-          default:
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-
-      case GL_FLOAT:
-      case GL_HALF_FLOAT_OES:
-        switch (format)
-        {
-          case GL_RGBA:
-          case GL_RGB:
-          case GL_ALPHA:
-          case GL_LUMINANCE:
-          case GL_LUMINANCE_ALPHA:
-            return true;
-          default:
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-
-      case GL_UNSIGNED_SHORT_4_4_4_4:
-      case GL_UNSIGNED_SHORT_5_5_5_1:
-        switch (format)
-        {
-          case GL_RGBA:
-            return true;
-          default:
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-
-      case GL_UNSIGNED_SHORT_5_6_5:
-        switch (format)
-        {
-          case GL_RGB:
-            return true;
-          default:
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-
-      case GL_UNSIGNED_SHORT:
-      case GL_UNSIGNED_INT:
-        switch (format)
-        {
-          case GL_DEPTH_COMPONENT:
-            return true;
-          default:
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-
-      case GL_UNSIGNED_INT_24_8_OES:
-        switch (format)
-        {
-          case GL_DEPTH_STENCIL_OES:
-            return true;
-          default:
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-
-      default:
-        return gl::error(GL_INVALID_ENUM, false);
-    }
-}
-
-bool validateSubImageParams2D(bool compressed, GLsizei width, GLsizei height,
-                              GLint xoffset, GLint yoffset, GLint level, GLenum format, GLenum type,
-                              gl::Texture2D *texture)
-{
-    if (!texture)
-    {
-        return gl::error(GL_INVALID_OPERATION, false);
-    }
-
-    if (compressed != texture->isCompressed(level))
-    {
-        return gl::error(GL_INVALID_OPERATION, false);
-    }
-
-    if (format != GL_NONE)
-    {
-        GLenum internalformat = gl::ConvertSizedInternalFormat(format, type);
-        if (internalformat != texture->getInternalFormat(level))
-        {
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-    }
-
-    if (compressed)
-    {
-        if ((width % 4 != 0 && width != texture->getWidth(0)) ||
-            (height % 4 != 0 && height != texture->getHeight(0)))
-        {
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-    }
-
-    if (xoffset + width > texture->getWidth(level) ||
-        yoffset + height > texture->getHeight(level))
-    {
-        return gl::error(GL_INVALID_VALUE, false);
-    }
-
-    return true;
-}
-
-bool validateSubImageParamsCube(bool compressed, GLsizei width, GLsizei height,
-                                GLint xoffset, GLint yoffset, GLenum target, GLint level, GLenum format, GLenum type,
-                                gl::TextureCubeMap *texture)
-{
-    if (!texture)
-    {
-        return gl::error(GL_INVALID_OPERATION, false);
-    }
-
-    if (compressed != texture->isCompressed(target, level))
-    {
-        return gl::error(GL_INVALID_OPERATION, false);
-    }
-
-    if (format != GL_NONE)
-    {
-        GLenum internalformat = gl::ConvertSizedInternalFormat(format, type);
-        if (internalformat != texture->getInternalFormat(target, level))
-        {
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-    }
-
-    if (compressed)
-    {
-        if ((width % 4 != 0 && width != texture->getWidth(target, 0)) ||
-            (height % 4 != 0 && height != texture->getHeight(target, 0)))
-        {
-            return gl::error(GL_INVALID_OPERATION, false);
-        }
-    }
-
-    if (xoffset + width > texture->getWidth(target, level) ||
-        yoffset + height > texture->getHeight(target, level))
-    {
-        return gl::error(GL_INVALID_VALUE, false);
-    }
+#include "libGLESv2/validationES.h"
+#include "libGLESv2/validationES2.h"
+#include "libGLESv2/validationES3.h"
+#include "libGLESv2/queryconversions.h"
 
-    return true;
-}
-
-// check for combinations of format and type that are valid for ReadPixels
-bool validReadFormatType(GLenum format, GLenum type)
-{
-    switch (format)
-    {
-      case GL_RGBA:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:
-            break;
-          default:
-            return false;
-        }
-        break;
-      case GL_BGRA_EXT:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:
-          case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:
-          case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:
-            break;
-          default:
-            return false;
-        }
-        break;
-      default:
-        return false;
-    }
-    return true;
-}
 
 extern "C"
 {
 
+// OpenGL ES 2.0 functions
+
 void __stdcall glActiveTexture(GLenum texture)
 {
     EVENT("(GLenum texture = 0x%X)", texture);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (texture < GL_TEXTURE0 || texture > GL_TEXTURE0 + context->getCaps().maxCombinedTextureImageUnits - 1)
         {
-            if (texture < GL_TEXTURE0 || texture > GL_TEXTURE0 + context->getMaximumCombinedTextureImageUnits() - 1)
-            {
-                return gl::error(GL_INVALID_ENUM);
-            }
-
-            context->setActiveSampler(texture - GL_TEXTURE0);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->getState().setActiveSampler(texture - GL_TEXTURE0);
     }
 }
 
@@ -284,48 +61,45 @@ void __stdcall glAttachShader(GLuint program, GLuint shader)
 {
     EVENT("(GLuint program = %d, GLuint shader = %d)", program, shader);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-
-            if (!shaderObject)
+            else
             {
-                if (context->getProgram(shader))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
 
-            if (!programObject->attachShader(shaderObject))
+        if (!shaderObject)
+        {
+            if (context->getProgram(shader))
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        if (!programObject->attachShader(shaderObject))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
     }
 }
 
@@ -333,75 +107,59 @@ void __stdcall glBeginQueryEXT(GLenum target, GLuint id)
 {
     EVENT("(GLenum target = 0x%X, GLuint %d)", target, id);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        switch (target)
-        {
-          case GL_ANY_SAMPLES_PASSED_EXT: 
-          case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
-              break;
-          default: 
-              return gl::error(GL_INVALID_ENUM);
-        }
-
-        if (id == 0)
+        if (!ValidateBeginQuery(context, target, id))
         {
-            return gl::error(GL_INVALID_OPERATION);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        gl::Error error = context->beginQuery(target, id);
+        if (error.isError())
         {
-            context->beginQuery(target, id);
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glBindAttribLocation(GLuint program, GLuint index, const GLchar* name)
 {
     EVENT("(GLuint program = %d, GLuint index = %d, const GLchar* name = 0x%0.8p)", program, index, name);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-
-            if (strncmp(name, "gl_", 3) == 0)
+            else
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
 
-            programObject->bindAttributeLocation(index, name);
+        if (strncmp(name, "gl_", 3) == 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        programObject->bindAttributeLocation(index, name);
     }
 }
 
@@ -409,84 +167,88 @@ void __stdcall glBindBuffer(GLenum target, GLuint buffer)
 {
     EVENT("(GLenum target = 0x%X, GLuint buffer = %d)", target, buffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        switch (target)
         {
-            switch (target)
-            {
-              case GL_ARRAY_BUFFER:
-                context->bindArrayBuffer(buffer);
-                return;
-              case GL_ELEMENT_ARRAY_BUFFER:
-                context->bindElementArrayBuffer(buffer);
-                return;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+          case GL_ARRAY_BUFFER:
+            context->bindArrayBuffer(buffer);
+            return;
+          case GL_ELEMENT_ARRAY_BUFFER:
+            context->bindElementArrayBuffer(buffer);
+            return;
+          case GL_COPY_READ_BUFFER:
+            context->bindCopyReadBuffer(buffer);
+            return;
+          case GL_COPY_WRITE_BUFFER:
+            context->bindCopyWriteBuffer(buffer);
+            return;
+          case GL_PIXEL_PACK_BUFFER:
+            context->bindPixelPackBuffer(buffer);
+            return;
+          case GL_PIXEL_UNPACK_BUFFER:
+            context->bindPixelUnpackBuffer(buffer);
+            return;
+          case GL_UNIFORM_BUFFER:
+            context->bindGenericUniformBuffer(buffer);
+            return;
+          case GL_TRANSFORM_FEEDBACK_BUFFER:
+            context->bindGenericTransformFeedbackBuffer(buffer);
+            return;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glBindFramebuffer(GLenum target, GLuint framebuffer)
 {
     EVENT("(GLenum target = 0x%X, GLuint framebuffer = %d)", target, framebuffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (target != GL_FRAMEBUFFER && target != GL_DRAW_FRAMEBUFFER_ANGLE && target != GL_READ_FRAMEBUFFER_ANGLE)
+        if (!gl::ValidFramebufferTarget(target))
         {
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (target == GL_READ_FRAMEBUFFER_ANGLE || target == GL_FRAMEBUFFER)
+        {
+            context->bindReadFramebuffer(framebuffer);
+        }
 
-        if (context)
+        if (target == GL_DRAW_FRAMEBUFFER_ANGLE || target == GL_FRAMEBUFFER)
         {
-            if (target == GL_READ_FRAMEBUFFER_ANGLE || target == GL_FRAMEBUFFER)
-            {
-                context->bindReadFramebuffer(framebuffer);
-            }
-            
-            if (target == GL_DRAW_FRAMEBUFFER_ANGLE || target == GL_FRAMEBUFFER)
-            {
-                context->bindDrawFramebuffer(framebuffer);
-            }
+            context->bindDrawFramebuffer(framebuffer);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glBindRenderbuffer(GLenum target, GLuint renderbuffer)
 {
     EVENT("(GLenum target = 0x%X, GLuint renderbuffer = %d)", target, renderbuffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (target != GL_RENDERBUFFER)
         {
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->bindRenderbuffer(renderbuffer);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->bindRenderbuffer(renderbuffer);
     }
 }
 
@@ -494,35 +256,38 @@ void __stdcall glBindTexture(GLenum target, GLuint texture)
 {
     EVENT("(GLenum target = 0x%X, GLuint texture = %d)", target, texture);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Texture *textureObject = context->getTexture(texture);
 
-        if (context)
+        if (textureObject && textureObject->getTarget() != target && texture != 0)
         {
-            gl::Texture *textureObject = context->getTexture(texture);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (textureObject && textureObject->getTarget() != target && texture != 0)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        switch (target)
+        {
+          case GL_TEXTURE_2D:
+          case GL_TEXTURE_CUBE_MAP:
+            break;
 
-            switch (target)
+          case GL_TEXTURE_3D:
+          case GL_TEXTURE_2D_ARRAY:
+            if (context->getClientVersion() < 3)
             {
-              case GL_TEXTURE_2D:
-                context->bindTexture2D(texture);
+                context->recordError(gl::Error(GL_INVALID_ENUM));
                 return;
-              case GL_TEXTURE_CUBE_MAP:
-                context->bindTextureCubeMap(texture);
-                return;
-              default:
-                return gl::error(GL_INVALID_ENUM);
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->bindTexture(target, texture);
     }
 }
 
@@ -531,18 +296,11 @@ void __stdcall glBlendColor(GLclampf red, GLclampf green, GLclampf blue, GLclamp
     EVENT("(GLclampf red = %f, GLclampf green = %f, GLclampf blue = %f, GLclampf alpha = %f)",
           red, green, blue, alpha);
 
-    try
-    {
-        gl::Context* context = gl::getNonLostContext();
+    gl::Context* context = gl::getNonLostContext();
 
-        if (context)
-        {
-            context->setBlendColor(gl::clamp01(red), gl::clamp01(green), gl::clamp01(blue), gl::clamp01(alpha));
-        }
-    }
-    catch(std::bad_alloc&)
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setBlendColor(gl::clamp01(red), gl::clamp01(green), gl::clamp01(blue), gl::clamp01(alpha));
     }
 }
 
@@ -555,16 +313,21 @@ void __stdcall glBlendEquationSeparate(GLenum modeRGB, GLenum modeAlpha)
 {
     EVENT("(GLenum modeRGB = 0x%X, GLenum modeAlpha = 0x%X)", modeRGB, modeAlpha);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (modeRGB)
         {
           case GL_FUNC_ADD:
           case GL_FUNC_SUBTRACT:
           case GL_FUNC_REVERSE_SUBTRACT:
+          case GL_MIN:
+          case GL_MAX:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (modeAlpha)
@@ -572,21 +335,16 @@ void __stdcall glBlendEquationSeparate(GLenum modeRGB, GLenum modeAlpha)
           case GL_FUNC_ADD:
           case GL_FUNC_SUBTRACT:
           case GL_FUNC_REVERSE_SUBTRACT:
+          case GL_MIN:
+          case GL_MAX:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setBlendEquation(modeRGB, modeAlpha);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setBlendEquation(modeRGB, modeAlpha);
     }
 }
 
@@ -600,7 +358,8 @@ void __stdcall glBlendFuncSeparate(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha
     EVENT("(GLenum srcRGB = 0x%X, GLenum dstRGB = 0x%X, GLenum srcAlpha = 0x%X, GLenum dstAlpha = 0x%X)",
           srcRGB, dstRGB, srcAlpha, dstAlpha);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (srcRGB)
         {
@@ -620,8 +379,10 @@ void __stdcall glBlendFuncSeparate(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha
           case GL_ONE_MINUS_CONSTANT_ALPHA:
           case GL_SRC_ALPHA_SATURATE:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+              context->recordError(gl::Error(GL_INVALID_ENUM));
+              return;
         }
 
         switch (dstRGB)
@@ -641,8 +402,18 @@ void __stdcall glBlendFuncSeparate(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha
           case GL_CONSTANT_ALPHA:
           case GL_ONE_MINUS_CONSTANT_ALPHA:
             break;
+
+          case GL_SRC_ALPHA_SATURATE:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (srcAlpha)
@@ -663,8 +434,10 @@ void __stdcall glBlendFuncSeparate(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha
           case GL_ONE_MINUS_CONSTANT_ALPHA:
           case GL_SRC_ALPHA_SATURATE:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+              context->recordError(gl::Error(GL_INVALID_ENUM));
+              return;
         }
 
         switch (dstAlpha)
@@ -684,8 +457,18 @@ void __stdcall glBlendFuncSeparate(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha
           case GL_CONSTANT_ALPHA:
           case GL_ONE_MINUS_CONSTANT_ALPHA:
             break;
+
+          case GL_SRC_ALPHA_SATURATE:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         bool constantColorUsed = (srcRGB == GL_CONSTANT_COLOR || srcRGB == GL_ONE_MINUS_CONSTANT_COLOR ||
@@ -697,19 +480,11 @@ void __stdcall glBlendFuncSeparate(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha
         if (constantColorUsed && constantAlphaUsed)
         {
             ERR("Simultaneous use of GL_CONSTANT_ALPHA/GL_ONE_MINUS_CONSTANT_ALPHA and GL_CONSTANT_COLOR/GL_ONE_MINUS_CONSTANT_COLOR invalid under WebGL");
-            return gl::error(GL_INVALID_OPERATION);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setBlendFactors(srcRGB, dstRGB, srcAlpha, dstAlpha);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setBlendFactors(srcRGB, dstRGB, srcAlpha, dstAlpha);
     }
 }
 
@@ -718,11 +493,13 @@ void __stdcall glBufferData(GLenum target, GLsizeiptr size, const GLvoid* data,
     EVENT("(GLenum target = 0x%X, GLsizeiptr size = %d, const GLvoid* data = 0x%0.8p, GLenum usage = %d)",
           target, size, data, usage);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (size < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
         switch (usage)
@@ -731,40 +508,46 @@ void __stdcall glBufferData(GLenum target, GLsizeiptr size, const GLvoid* data,
           case GL_STATIC_DRAW:
           case GL_DYNAMIC_DRAW:
             break;
+
+          case GL_STREAM_READ:
+          case GL_STREAM_COPY:
+          case GL_STATIC_READ:
+          case GL_STATIC_COPY:
+          case GL_DYNAMIC_READ:
+          case GL_DYNAMIC_COPY:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+              context->recordError(gl::Error(GL_INVALID_ENUM));
+              return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!gl::ValidBufferTarget(context, target))
         {
-            gl::Buffer *buffer;
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            switch (target)
-            {
-              case GL_ARRAY_BUFFER:
-                buffer = context->getArrayBuffer();
-                break;
-              case GL_ELEMENT_ARRAY_BUFFER:
-                buffer = context->getElementArrayBuffer();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
 
-            if (!buffer)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        if (!buffer)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            buffer->bufferData(data, size, usage);
+        gl::Error error = buffer->bufferData(data, size, usage);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glBufferSubData(GLenum target, GLintptr offset, GLsizeiptr size, const GLvoid* data)
@@ -772,11 +555,13 @@ void __stdcall glBufferSubData(GLenum target, GLintptr offset, GLsizeiptr size,
     EVENT("(GLenum target = 0x%X, GLintptr offset = %d, GLsizeiptr size = %d, const GLvoid* data = 0x%0.8p)",
           target, offset, size, data);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (size < 0 || offset < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
         if (data == NULL)
@@ -784,74 +569,64 @@ void __stdcall glBufferSubData(GLenum target, GLintptr offset, GLsizeiptr size,
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
 
-        if (context)
+        if (!buffer)
         {
-            gl::Buffer *buffer;
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            switch (target)
-            {
-              case GL_ARRAY_BUFFER:
-                buffer = context->getArrayBuffer();
-                break;
-              case GL_ELEMENT_ARRAY_BUFFER:
-                buffer = context->getElementArrayBuffer();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+        if (buffer->isMapped())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (!buffer)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        // Check for possible overflow of size + offset
+        if (!rx::IsUnsignedAdditionSafe<size_t>(size, offset))
+        {
+            context->recordError(gl::Error(GL_OUT_OF_MEMORY));
+            return;
+        }
 
-            if ((size_t)size + offset > buffer->size())
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
+        if (size + offset > buffer->getSize())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            buffer->bufferSubData(data, size, offset);
+        gl::Error error = buffer->bufferSubData(data, size, offset);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 GLenum __stdcall glCheckFramebufferStatus(GLenum target)
 {
     EVENT("(GLenum target = 0x%X)", target);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (target != GL_FRAMEBUFFER && target != GL_DRAW_FRAMEBUFFER_ANGLE && target != GL_READ_FRAMEBUFFER_ANGLE)
+        if (!gl::ValidFramebufferTarget(target))
         {
-            return gl::error(GL_INVALID_ENUM, 0);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return 0;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            gl::Framebuffer *framebuffer = NULL;
-            if (target == GL_READ_FRAMEBUFFER_ANGLE)
-            {
-                framebuffer = context->getReadFramebuffer();
-            }
-            else
-            {
-                framebuffer = context->getDrawFramebuffer();
-            }
-
-            return framebuffer->completeness();
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, 0);
+        gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+        ASSERT(framebuffer);
+        return framebuffer->completeness();
     }
 
     return 0;
@@ -859,20 +634,31 @@ GLenum __stdcall glCheckFramebufferStatus(GLenum target)
 
 void __stdcall glClear(GLbitfield mask)
 {
-    EVENT("(GLbitfield mask = %X)", mask);
+    EVENT("(GLbitfield mask = 0x%X)", mask);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Framebuffer *framebufferObject = context->getState().getDrawFramebuffer();
 
-        if (context)
+        if (!framebufferObject || framebufferObject->completeness() != GL_FRAMEBUFFER_COMPLETE)
         {
-            context->clear(mask);
+            context->recordError(gl::Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+            return;
+        }
+
+        if ((mask & ~(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT | GL_STENCIL_BUFFER_BIT)) != 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        gl::Error error = context->clear(mask);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
     }
 }
 
@@ -881,18 +667,10 @@ void __stdcall glClearColor(GLclampf red, GLclampf green, GLclampf blue, GLclamp
     EVENT("(GLclampf red = %f, GLclampf green = %f, GLclampf blue = %f, GLclampf alpha = %f)",
           red, green, blue, alpha);
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setClearColor(red, green, blue, alpha);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setClearColor(red, green, blue, alpha);
     }
 }
 
@@ -900,18 +678,10 @@ void __stdcall glClearDepthf(GLclampf depth)
 {
     EVENT("(GLclampf depth = %f)", depth);
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setClearDepth(depth);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setClearDepth(depth);
     }
 }
 
@@ -919,38 +689,22 @@ void __stdcall glClearStencil(GLint s)
 {
     EVENT("(GLint s = %d)", s);
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setClearStencil(s);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setClearStencil(s);
     }
 }
 
 void __stdcall glColorMask(GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha)
 {
-    EVENT("(GLboolean red = %d, GLboolean green = %d, GLboolean blue = %d, GLboolean alpha = %d)",
+    EVENT("(GLboolean red = %d, GLboolean green = %u, GLboolean blue = %u, GLboolean alpha = %u)",
           red, green, blue, alpha);
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setColorMask(red == GL_TRUE, green == GL_TRUE, blue == GL_TRUE, alpha == GL_TRUE);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setColorMask(red == GL_TRUE, green == GL_TRUE, blue == GL_TRUE, alpha == GL_TRUE);
     }
 }
 
@@ -958,191 +712,85 @@ void __stdcall glCompileShader(GLuint shader)
 {
     EVENT("(GLuint shader = %d)", shader);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (!shaderObject)
+            if (context->getProgram(shader))
             {
-                if (context->getProgram(shader))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            shaderObject->compile();
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        shaderObject->compile();
     }
 }
 
-void __stdcall glCompressedTexImage2D(GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, 
+void __stdcall glCompressedTexImage2D(GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height,
                                       GLint border, GLsizei imageSize, const GLvoid* data)
 {
-    EVENT("(GLenum target = 0x%X, GLint level = %d, GLenum internalformat = 0x%X, GLsizei width = %d, " 
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLenum internalformat = 0x%X, GLsizei width = %d, "
           "GLsizei height = %d, GLint border = %d, GLsizei imageSize = %d, const GLvoid* data = 0x%0.8p)",
           target, level, internalformat, width, height, border, imageSize, data);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (!validImageSize(level, width, height) || border != 0 || imageSize < 0)
-        {
-            return gl::error(GL_INVALID_VALUE);
-        }
-
-        switch (internalformat)
-        {
-          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-            break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        if (border != 0)
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2TexImageParameters(context, target, level, internalformat, true, false,
+                                           0, 0, width, height, border, GL_NONE, GL_NONE, data))
         {
-            return gl::error(GL_INVALID_OPERATION);
+            return;
         }
 
-        if (width != 1 && width != 2 && width % 4 != 0)
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3TexImageParameters(context, target, level, internalformat, true, false,
+                                           0, 0, 0, width, height, 1, border, GL_NONE, GL_NONE, data))
         {
-            return gl::error(GL_INVALID_OPERATION);
+            return;
         }
 
-        if (height != 1 && height != 2 && height % 4 != 0)
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+        if (imageSize < 0 || static_cast<GLuint>(imageSize) != formatInfo.computeBlockSize(GL_UNSIGNED_BYTE, width, height))
         {
-            return gl::error(GL_INVALID_OPERATION);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        switch (target)
         {
-            if (level > context->getMaximumTextureLevel())
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            switch (target)
-            {
-              case GL_TEXTURE_2D:
-                if (width > (context->getMaximumTextureDimension() >> level) ||
-                    height > (context->getMaximumTextureDimension() >> level))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-                if (width != height)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-
-                if (width > (context->getMaximumCubeTextureDimension() >> level) ||
-                    height > (context->getMaximumCubeTextureDimension() >> level))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
-
-            switch (internalformat) {
-              case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-                if (!context->supportsDXT1Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM); // in this case, it's as though the internal format switch failed
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-                if (!context->supportsDXT3Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM); // in this case, it's as though the internal format switch failed
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-                if (!context->supportsDXT5Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM); // in this case, it's as though the internal format switch failed
-                }
-                break;
-              default: UNREACHABLE();
-            }
-
-            if (imageSize != gl::ComputeCompressedSize(width, height, internalformat))
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            if (target == GL_TEXTURE_2D)
+          case GL_TEXTURE_2D:
             {
                 gl::Texture2D *texture = context->getTexture2D();
-
-                if (!texture)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
                 texture->setCompressedImage(level, internalformat, width, height, imageSize, data);
             }
-            else
+            break;
+
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
             {
                 gl::TextureCubeMap *texture = context->getTextureCubeMap();
-
-                if (!texture)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                switch (target)
-                {
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-                    texture->setCompressedImage(target, level, internalformat, width, height, imageSize, data);
-                    break;
-                  default: UNREACHABLE();
-                }
+                texture->setCompressedImage(target, level, internalformat, width, height, imageSize, data);
             }
-        }
+            break;
 
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
     }
 }
 
@@ -1154,103 +802,56 @@ void __stdcall glCompressedTexSubImage2D(GLenum target, GLint level, GLint xoffs
           "GLsizei imageSize = %d, const GLvoid* data = 0x%0.8p)",
           target, level, xoffset, yoffset, width, height, format, imageSize, data);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (!gl::IsInternalTextureTarget(target))
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2TexImageParameters(context, target, level, GL_NONE, true, true,
+                                           xoffset, yoffset, width, height, 0, GL_NONE, GL_NONE, data))
         {
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        if (xoffset < 0 || yoffset < 0 || !validImageSize(level, width, height) || imageSize < 0)
-        {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        switch (format)
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3TexImageParameters(context, target, level, GL_NONE, true, true,
+                                           xoffset, yoffset, 0, width, height, 1, 0, GL_NONE, GL_NONE, data))
         {
-          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-            break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
+            return;
         }
 
-        if (width == 0 || height == 0 || data == NULL)
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(format);
+        if (imageSize < 0 || static_cast<GLuint>(imageSize) != formatInfo.computeBlockSize(GL_UNSIGNED_BYTE, width, height))
         {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        switch (target)
         {
-            if (level > context->getMaximumTextureLevel())
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            switch (format) {
-              case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-                if (!context->supportsDXT1Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM); // in this case, it's as though the internal format switch failed
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-                if (!context->supportsDXT3Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM); // in this case, it's as though the internal format switch failed
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-                if (!context->supportsDXT5Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM); // in this case, it's as though the internal format switch failed
-                }
-                break;
-              default: UNREACHABLE();
-            }
-
-            if (imageSize != gl::ComputeCompressedSize(width, height, format))
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            if (xoffset % 4 != 0 || yoffset % 4 != 0)
-            {
-                return gl::error(GL_INVALID_OPERATION); // we wait to check the offsets until this point, because the multiple-of-four restriction
-                                                    // does not exist unless DXT textures are supported.
-            }
-
-            if (target == GL_TEXTURE_2D)
+          case GL_TEXTURE_2D:
             {
                 gl::Texture2D *texture = context->getTexture2D();
-                if (validateSubImageParams2D(true, width, height, xoffset, yoffset, level, format, GL_NONE, texture))
-                {
-                    texture->subImageCompressed(level, xoffset, yoffset, width, height, format, imageSize, data);
-                }
+                texture->subImageCompressed(level, xoffset, yoffset, width, height, format, imageSize, data);
             }
-            else if (gl::IsCubemapTextureTarget(target))
+            break;
+
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
             {
                 gl::TextureCubeMap *texture = context->getTextureCubeMap();
-                if (validateSubImageParamsCube(true, width, height, xoffset, yoffset, target, level, format, GL_NONE, texture))
-                {
-                    texture->subImageCompressed(target, level, xoffset, yoffset, width, height, format, imageSize, data);
-                }
-            }
-            else
-            {
-                UNREACHABLE();
+                texture->subImageCompressed(target, level, xoffset, yoffset, width, height, format, imageSize, data);
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glCopyTexImage2D(GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border)
@@ -1259,194 +860,51 @@ void __stdcall glCopyTexImage2D(GLenum target, GLint level, GLenum internalforma
           "GLint x = %d, GLint y = %d, GLsizei width = %d, GLsizei height = %d, GLint border = %d)",
           target, level, internalformat, x, y, width, height, border);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (!validImageSize(level, width, height))
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2CopyTexImageParameters(context, target, level, internalformat, false,
+                                               0, 0, x, y, width, height, border))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (border != 0)
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3CopyTexImageParameters(context, target, level, internalformat, false,
+                                               0, 0, 0, x, y, width, height, border))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
 
-        if (context)
+        switch (target)
         {
-            if (level > context->getMaximumTextureLevel())
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            switch (target)
-            {
-              case GL_TEXTURE_2D:
-                if (width > (context->getMaximumTextureDimension() >> level) ||
-                    height > (context->getMaximumTextureDimension() >> level))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-                if (width != height)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-
-                if (width > (context->getMaximumCubeTextureDimension() >> level) ||
-                    height > (context->getMaximumCubeTextureDimension() >> level))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
-
-            gl::Framebuffer *framebuffer = context->getReadFramebuffer();
-
-            if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
-            {
-                return gl::error(GL_INVALID_FRAMEBUFFER_OPERATION);
-            }
-
-            if (context->getReadFramebufferHandle() != 0 && framebuffer->getSamples() != 0)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            gl::Renderbuffer *source = framebuffer->getReadColorbuffer();
-            GLenum colorbufferFormat = source->getInternalFormat();
-
-            // [OpenGL ES 2.0.24] table 3.9
-            switch (internalformat)
-            {
-              case GL_ALPHA:
-                if (colorbufferFormat != GL_ALPHA8_EXT &&
-                    colorbufferFormat != GL_RGBA4 &&
-                    colorbufferFormat != GL_RGB5_A1 &&
-                    colorbufferFormat != GL_BGRA8_EXT &&
-                    colorbufferFormat != GL_RGBA8_OES)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              case GL_LUMINANCE:
-              case GL_RGB:
-                if (colorbufferFormat != GL_RGB565 &&
-                    colorbufferFormat != GL_RGB8_OES &&
-                    colorbufferFormat != GL_RGBA4 &&
-                    colorbufferFormat != GL_RGB5_A1 &&
-                    colorbufferFormat != GL_BGRA8_EXT &&
-                    colorbufferFormat != GL_RGBA8_OES)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              case GL_LUMINANCE_ALPHA:
-              case GL_RGBA:
-                if (colorbufferFormat != GL_RGBA4 &&
-                    colorbufferFormat != GL_RGB5_A1 &&
-                    colorbufferFormat != GL_BGRA8_EXT &&
-                    colorbufferFormat != GL_RGBA8_OES)
-                 {
-                     return gl::error(GL_INVALID_OPERATION);
-                 }
-                 break;
-              case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-                if (context->supportsDXT1Textures())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-                if (context->supportsDXT3Textures())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-                if (context->supportsDXT5Textures())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_DEPTH_COMPONENT:
-              case GL_DEPTH_COMPONENT16:
-              case GL_DEPTH_COMPONENT32_OES:
-              case GL_DEPTH_STENCIL_OES:
-              case GL_DEPTH24_STENCIL8_OES:
-                  if (context->supportsDepthTextures())
-                  {
-                      return gl::error(GL_INVALID_OPERATION);
-                  }
-                  else
-                  {
-                      return gl::error(GL_INVALID_ENUM);
-                  }
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
-
-            if (target == GL_TEXTURE_2D)
+          case GL_TEXTURE_2D:
             {
                 gl::Texture2D *texture = context->getTexture2D();
-
-                if (!texture)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
                 texture->copyImage(level, internalformat, x, y, width, height, framebuffer);
             }
-            else if (gl::IsCubemapTextureTarget(target))
+            break;
+
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
             {
                 gl::TextureCubeMap *texture = context->getTextureCubeMap();
-
-                if (!texture)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
                 texture->copyImage(target, level, internalformat, x, y, width, height, framebuffer);
             }
-            else UNREACHABLE();
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glCopyTexSubImage2D(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height)
@@ -1455,148 +913,61 @@ void __stdcall glCopyTexSubImage2D(GLenum target, GLint level, GLint xoffset, GL
           "GLint x = %d, GLint y = %d, GLsizei width = %d, GLsizei height = %d)",
           target, level, xoffset, yoffset, x, y, width, height);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (!gl::IsInternalTextureTarget(target))
-        {
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        if (level < 0 || xoffset < 0 || yoffset < 0 || width < 0 || height < 0)
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2CopyTexImageParameters(context, target, level, GL_NONE, true,
+                                               xoffset, yoffset, x, y, width, height, 0))
         {
-            return gl::error(GL_INVALID_VALUE);
-        }
-
-        if (std::numeric_limits<GLsizei>::max() - xoffset < width || std::numeric_limits<GLsizei>::max() - yoffset < height)
-        {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (width == 0 || height == 0)
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3CopyTexImageParameters(context, target, level, GL_NONE, true,
+                                               xoffset, yoffset, 0, x, y, width, height, 0))
         {
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
 
-        if (context)
+        switch (target)
         {
-            if (level > context->getMaximumTextureLevel())
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            gl::Framebuffer *framebuffer = context->getReadFramebuffer();
-
-            if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
-            {
-                return gl::error(GL_INVALID_FRAMEBUFFER_OPERATION);
-            }
-
-            if (context->getReadFramebufferHandle() != 0 && framebuffer->getSamples() != 0)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            gl::Renderbuffer *source = framebuffer->getReadColorbuffer();
-            GLenum colorbufferFormat = source->getInternalFormat();
-            gl::Texture *texture = NULL;
-            GLenum textureFormat = GL_RGBA;
-
-            if (target == GL_TEXTURE_2D)
+          case GL_TEXTURE_2D:
             {
-                gl::Texture2D *tex2d = context->getTexture2D();
-
-                if (!validateSubImageParams2D(false, width, height, xoffset, yoffset, level, GL_NONE, GL_NONE, tex2d))
-                {
-                    return; // error already registered by validateSubImageParams
-                }
-                textureFormat = gl::ExtractFormat(tex2d->getInternalFormat(level));
-                texture = tex2d;
-            }
-            else if (gl::IsCubemapTextureTarget(target))
-            {
-                gl::TextureCubeMap *texcube = context->getTextureCubeMap();
-
-                if (!validateSubImageParamsCube(false, width, height, xoffset, yoffset, target, level, GL_NONE, GL_NONE, texcube))
-                {
-                    return; // error already registered by validateSubImageParams
-                }
-                textureFormat = gl::ExtractFormat(texcube->getInternalFormat(target, level));
-                texture = texcube;
+                gl::Texture2D *texture = context->getTexture2D();
+                texture->copySubImage(target, level, xoffset, yoffset, 0, x, y, width, height, framebuffer);
             }
-            else UNREACHABLE();
+            break;
 
-            // [OpenGL ES 2.0.24] table 3.9
-            switch (textureFormat)
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
             {
-              case GL_ALPHA:
-                if (colorbufferFormat != GL_ALPHA8_EXT &&
-                    colorbufferFormat != GL_RGBA4 &&
-                    colorbufferFormat != GL_RGB5_A1 &&
-                    colorbufferFormat != GL_RGBA8_OES)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              case GL_LUMINANCE:
-              case GL_RGB:
-                if (colorbufferFormat != GL_RGB565 &&
-                    colorbufferFormat != GL_RGB8_OES &&
-                    colorbufferFormat != GL_RGBA4 &&
-                    colorbufferFormat != GL_RGB5_A1 &&
-                    colorbufferFormat != GL_RGBA8_OES)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              case GL_LUMINANCE_ALPHA:
-              case GL_RGBA:
-                if (colorbufferFormat != GL_RGBA4 &&
-                    colorbufferFormat != GL_RGB5_A1 &&
-                    colorbufferFormat != GL_RGBA8_OES)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-              case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-                return gl::error(GL_INVALID_OPERATION);
-              case GL_DEPTH_COMPONENT:
-              case GL_DEPTH_STENCIL_OES:
-                return gl::error(GL_INVALID_OPERATION);
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->copySubImage(target, level, xoffset, yoffset, 0, x, y, width, height, framebuffer);
             }
+            break;
 
-            texture->copySubImage(target, level, xoffset, yoffset, x, y, width, height, framebuffer);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 GLuint __stdcall glCreateProgram(void)
 {
     EVENT("()");
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            return context->createProgram();
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY, 0);
+        return context->createProgram();
     }
 
     return 0;
@@ -1606,26 +977,20 @@ GLuint __stdcall glCreateShader(GLenum type)
 {
     EVENT("(GLenum type = 0x%X)", type);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        switch (type)
         {
-            switch (type)
-            {
-              case GL_FRAGMENT_SHADER:
-              case GL_VERTEX_SHADER:
-                return context->createShader(type);
-              default:
-                return gl::error(GL_INVALID_ENUM, 0);
-            }
+          case GL_FRAGMENT_SHADER:
+          case GL_VERTEX_SHADER:
+            return context->createShader(type);
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return 0;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, 0);
-    }
 
     return 0;
 }
@@ -1634,29 +999,22 @@ void __stdcall glCullFace(GLenum mode)
 {
     EVENT("(GLenum mode = 0x%X)", mode);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (mode)
         {
           case GL_FRONT:
           case GL_BACK:
           case GL_FRONT_AND_BACK:
-            {
-                gl::Context *context = gl::getNonLostContext();
-
-                if (context)
-                {
-                    context->setCullMode(mode);
-                }
-            }
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->getState().setCullMode(mode);
     }
 }
 
@@ -1664,119 +1022,92 @@ void __stdcall glDeleteBuffers(GLsizei n, const GLuint* buffers)
 {
     EVENT("(GLsizei n = %d, const GLuint* buffers = 0x%0.8p)", n, buffers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                context->deleteBuffer(buffers[i]);
-            }
+            context->deleteBuffer(buffers[i]);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDeleteFencesNV(GLsizei n, const GLuint* fences)
 {
     EVENT("(GLsizei n = %d, const GLuint* fences = 0x%0.8p)", n, fences);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                context->deleteFence(fences[i]);
-            }
+            context->deleteFenceNV(fences[i]);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDeleteFramebuffers(GLsizei n, const GLuint* framebuffers)
 {
     EVENT("(GLsizei n = %d, const GLuint* framebuffers = 0x%0.8p)", n, framebuffers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
+            if (framebuffers[i] != 0)
             {
-                if (framebuffers[i] != 0)
-                {
-                    context->deleteFramebuffer(framebuffers[i]);
-                }
+                context->deleteFramebuffer(framebuffers[i]);
             }
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDeleteProgram(GLuint program)
 {
     EVENT("(GLuint program = %d)", program);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (program == 0)
         {
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!context->getProgram(program))
         {
-            if (!context->getProgram(program))
+            if(context->getShader(program))
             {
-                if(context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            context->deleteProgram(program);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->deleteProgram(program);
     }
 }
 
@@ -1784,89 +1115,69 @@ void __stdcall glDeleteQueriesEXT(GLsizei n, const GLuint *ids)
 {
     EVENT("(GLsizei n = %d, const GLuint *ids = 0x%0.8p)", n, ids);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                context->deleteQuery(ids[i]);
-            }
+            context->deleteQuery(ids[i]);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDeleteRenderbuffers(GLsizei n, const GLuint* renderbuffers)
 {
     EVENT("(GLsizei n = %d, const GLuint* renderbuffers = 0x%0.8p)", n, renderbuffers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                context->deleteRenderbuffer(renderbuffers[i]);
-            }
+            context->deleteRenderbuffer(renderbuffers[i]);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDeleteShader(GLuint shader)
 {
     EVENT("(GLuint shader = %d)", shader);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (shader == 0)
         {
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!context->getShader(shader))
         {
-            if (!context->getShader(shader))
+            if(context->getProgram(shader))
             {
-                if(context->getProgram(shader))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            context->deleteShader(shader);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->deleteShader(shader);
     }
 }
 
@@ -1874,37 +1185,31 @@ void __stdcall glDeleteTextures(GLsizei n, const GLuint* textures)
 {
     EVENT("(GLsizei n = %d, const GLuint* textures = 0x%0.8p)", n, textures);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
+            if (textures[i] != 0)
             {
-                if (textures[i] != 0)
-                {
-                    context->deleteTexture(textures[i]);
-                }
+                context->deleteTexture(textures[i]);
             }
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDepthFunc(GLenum func)
 {
     EVENT("(GLenum func = 0x%X)", func);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (func)
         {
@@ -1916,40 +1221,24 @@ void __stdcall glDepthFunc(GLenum func)
           case GL_GREATER:
           case GL_GEQUAL:
           case GL_NOTEQUAL:
+            context->getState().setDepthFunc(func);
             break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        gl::Context *context = gl::getNonLostContext();
 
-        if (context)
-        {
-            context->setDepthFunc(func);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDepthMask(GLboolean flag)
 {
-    EVENT("(GLboolean flag = %d)", flag);
-
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
+    EVENT("(GLboolean flag = %u)", flag);
 
-        if (context)
-        {
-            context->setDepthMask(flag != GL_FALSE);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setDepthMask(flag != GL_FALSE);
     }
 }
 
@@ -1957,18 +1246,10 @@ void __stdcall glDepthRangef(GLclampf zNear, GLclampf zFar)
 {
     EVENT("(GLclampf zNear = %f, GLclampf zFar = %f)", zNear, zFar);
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setDepthRange(zNear, zFar);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setDepthRange(zNear, zFar);
     }
 }
 
@@ -1976,52 +1257,48 @@ void __stdcall glDetachShader(GLuint program, GLuint shader)
 {
     EVENT("(GLuint program = %d, GLuint shader = %d)", program, shader);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!programObject)
         {
-
-            gl::Program *programObject = context->getProgram(program);
-            gl::Shader *shaderObject = context->getShader(shader);
-            
-            if (!programObject)
+            gl::Shader *shaderByProgramHandle;
+            shaderByProgramHandle = context->getShader(program);
+            if (!shaderByProgramHandle)
             {
-                gl::Shader *shaderByProgramHandle;
-                shaderByProgramHandle = context->getShader(program);
-                if (!shaderByProgramHandle)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            if (!shaderObject)
+            else
             {
-                gl::Program *programByShaderHandle = context->getProgram(shader);
-                if (!programByShaderHandle)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
+        }
 
-            if (!programObject->detachShader(shaderObject))
+        if (!shaderObject)
+        {
+            gl::Program *programByShaderHandle = context->getProgram(shader);
+            if (!programByShaderHandle)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            else
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        if (!programObject->detachShader(shaderObject))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
     }
 }
 
@@ -2029,31 +1306,16 @@ void __stdcall glDisable(GLenum cap)
 {
     EVENT("(GLenum cap = 0x%X)", cap);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!ValidCap(context, cap))
         {
-            switch (cap)
-            {
-              case GL_CULL_FACE:                context->setCullFace(false);              break;
-              case GL_POLYGON_OFFSET_FILL:      context->setPolygonOffsetFill(false);     break;
-              case GL_SAMPLE_ALPHA_TO_COVERAGE: context->setSampleAlphaToCoverage(false); break;
-              case GL_SAMPLE_COVERAGE:          context->setSampleCoverage(false);        break;
-              case GL_SCISSOR_TEST:             context->setScissorTest(false);           break;
-              case GL_STENCIL_TEST:             context->setStencilTest(false);           break;
-              case GL_DEPTH_TEST:               context->setDepthTest(false);             break;
-              case GL_BLEND:                    context->setBlend(false);                 break;
-              case GL_DITHER:                   context->setDither(false);                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->getState().setEnableFeature(cap, false);
     }
 }
 
@@ -2061,23 +1323,16 @@ void __stdcall glDisableVertexAttribArray(GLuint index)
 {
     EVENT("(GLuint index = %d)", index);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setEnableVertexAttribArray(index, false);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setEnableVertexAttribArray(index, false);
     }
 }
 
@@ -2085,51 +1340,42 @@ void __stdcall glDrawArrays(GLenum mode, GLint first, GLsizei count)
 {
     EVENT("(GLenum mode = 0x%X, GLint first = %d, GLsizei count = %d)", mode, first, count);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0 || first < 0)
+        if (!ValidateDrawArrays(context, mode, first, count, 0))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        gl::Error error = context->drawArrays(mode, first, count, 0);
+        if (error.isError())
         {
-            context->drawArrays(mode, first, count, 0);
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDrawArraysInstancedANGLE(GLenum mode, GLint first, GLsizei count, GLsizei primcount)
 {
     EVENT("(GLenum mode = 0x%X, GLint first = %d, GLsizei count = %d, GLsizei primcount = %d)", mode, first, count, primcount);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0 || first < 0 || primcount < 0)
+        if (!ValidateDrawArraysInstancedANGLE(context, mode, first, count, primcount))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (primcount > 0)
+        gl::Error error = context->drawArrays(mode, first, count, primcount);
+        if (error.isError())
         {
-            gl::Context *context = gl::getNonLostContext();
-
-            if (context)
-            {
-                context->drawArrays(mode, first, count, primcount);
-            }
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDrawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid* indices)
@@ -2137,39 +1383,22 @@ void __stdcall glDrawElements(GLenum mode, GLsizei count, GLenum type, const GLv
     EVENT("(GLenum mode = 0x%X, GLsizei count = %d, GLenum type = 0x%X, const GLvoid* indices = 0x%0.8p)",
           mode, count, type, indices);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        rx::RangeUI indexRange;
+        if (!ValidateDrawElements(context, mode, count, type, indices, 0, &indexRange))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        gl::Error error = context->drawElements(mode, count, type, indices, 0, indexRange);
+        if (error.isError())
         {
-            switch (type)
-            {
-              case GL_UNSIGNED_BYTE:
-              case GL_UNSIGNED_SHORT:
-                break;
-              case GL_UNSIGNED_INT:
-                if (!context->supports32bitIndices())
-                {
-                    return gl::error(GL_INVALID_ENUM);    
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
-        
-            context->drawElements(mode, count, type, indices, 0);
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glDrawElementsInstancedANGLE(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount)
@@ -2177,73 +1406,38 @@ void __stdcall glDrawElementsInstancedANGLE(GLenum mode, GLsizei count, GLenum t
     EVENT("(GLenum mode = 0x%X, GLsizei count = %d, GLenum type = 0x%X, const GLvoid* indices = 0x%0.8p, GLsizei primcount = %d)",
           mode, count, type, indices, primcount);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0 || primcount < 0)
+        rx::RangeUI indexRange;
+        if (!ValidateDrawElementsInstancedANGLE(context, mode, count, type, indices, primcount, &indexRange))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (primcount > 0)
+        gl::Error error = context->drawElements(mode, count, type, indices, primcount, indexRange);
+        if (error.isError())
         {
-            gl::Context *context = gl::getNonLostContext();
-
-            if (context)
-            {
-                switch (type)
-                {
-                  case GL_UNSIGNED_BYTE:
-                  case GL_UNSIGNED_SHORT:
-                    break;
-                  case GL_UNSIGNED_INT:
-                    if (!context->supports32bitIndices())
-                    {
-                        return gl::error(GL_INVALID_ENUM);    
-                    }
-                    break;
-                  default:
-                    return gl::error(GL_INVALID_ENUM);
-                }
-            
-                context->drawElements(mode, count, type, indices, primcount);
-            }
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glEnable(GLenum cap)
 {
     EVENT("(GLenum cap = 0x%X)", cap);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!ValidCap(context, cap))
         {
-            switch (cap)
-            {
-              case GL_CULL_FACE:                context->setCullFace(true);              break;
-              case GL_POLYGON_OFFSET_FILL:      context->setPolygonOffsetFill(true);     break;
-              case GL_SAMPLE_ALPHA_TO_COVERAGE: context->setSampleAlphaToCoverage(true); break;
-              case GL_SAMPLE_COVERAGE:          context->setSampleCoverage(true);        break;
-              case GL_SCISSOR_TEST:             context->setScissorTest(true);           break;
-              case GL_STENCIL_TEST:             context->setStencilTest(true);           break;
-              case GL_DEPTH_TEST:               context->setDepthTest(true);             break;
-              case GL_BLEND:                    context->setBlend(true);                 break;
-              case GL_DITHER:                   context->setDither(true);                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->getState().setEnableFeature(cap, true);
     }
 }
 
@@ -2251,23 +1445,16 @@ void __stdcall glEnableVertexAttribArray(GLuint index)
 {
     EVENT("(GLuint index = %d)", index);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setEnableVertexAttribArray(index, true);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setEnableVertexAttribArray(index, true);
     }
 }
 
@@ -2275,53 +1462,45 @@ void __stdcall glEndQueryEXT(GLenum target)
 {
     EVENT("GLenum target = 0x%X)", target);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        switch (target)
+        if (!ValidateEndQuery(context, target))
         {
-          case GL_ANY_SAMPLES_PASSED_EXT: 
-          case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
-              break;
-          default: 
-              return gl::error(GL_INVALID_ENUM);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        gl::Error error = context->endQuery(target);
+        if (error.isError())
         {
-            context->endQuery(target);
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glFinishFenceNV(GLuint fence)
 {
     EVENT("(GLuint fence = %d)", fence);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::FenceNV *fenceObject = context->getFenceNV(fence);
 
-        if (context)
+        if (fenceObject == NULL)
         {
-            gl::Fence* fenceObject = context->getFence(fence);
-
-            if (fenceObject == NULL)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            fenceObject->finishFence();
+        if (fenceObject->isFence() != GL_TRUE)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        fenceObject->finishFence();
     }
 }
 
@@ -2329,18 +1508,10 @@ void __stdcall glFinish(void)
 {
     EVENT("()");
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->sync(true);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->sync(true);
     }
 }
 
@@ -2348,18 +1519,10 @@ void __stdcall glFlush(void)
 {
     EVENT("()");
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->sync(false);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->sync(false);
     }
 }
 
@@ -2368,67 +1531,47 @@ void __stdcall glFramebufferRenderbuffer(GLenum target, GLenum attachment, GLenu
     EVENT("(GLenum target = 0x%X, GLenum attachment = 0x%X, GLenum renderbuffertarget = 0x%X, "
           "GLuint renderbuffer = %d)", target, attachment, renderbuffertarget, renderbuffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if ((target != GL_FRAMEBUFFER && target != GL_DRAW_FRAMEBUFFER_ANGLE && target != GL_READ_FRAMEBUFFER_ANGLE)
-            || (renderbuffertarget != GL_RENDERBUFFER && renderbuffer != 0))
+        if (!gl::ValidFramebufferTarget(target) || (renderbuffertarget != GL_RENDERBUFFER && renderbuffer != 0))
         {
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!gl::ValidateFramebufferRenderbufferParameters(context, target, attachment, renderbuffertarget, renderbuffer))
         {
-            gl::Framebuffer *framebuffer = NULL;
-            GLuint framebufferHandle = 0;
-            if (target == GL_READ_FRAMEBUFFER_ANGLE)
-            {
-                framebuffer = context->getReadFramebuffer();
-                framebufferHandle = context->getReadFramebufferHandle();
-            }
-            else
-            {
-                framebuffer = context->getDrawFramebuffer();
-                framebufferHandle = context->getDrawFramebufferHandle();
-            }
-
-            if (!framebuffer || (framebufferHandle == 0 && renderbuffer != 0))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
-            {
-                const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
+            return;
+        }
 
-                if (colorAttachment >= context->getMaximumRenderTargets())
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+        gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+        ASSERT(framebuffer);
 
-                framebuffer->setColorbuffer(colorAttachment, GL_RENDERBUFFER, renderbuffer);
-            }
-            else
+        if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+        {
+            unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
+            framebuffer->setColorbuffer(colorAttachment, GL_RENDERBUFFER, renderbuffer, 0, 0);
+        }
+        else
+        {
+            switch (attachment)
             {
-                switch (attachment)
-                {
-                  case GL_DEPTH_ATTACHMENT:
-                    framebuffer->setDepthbuffer(GL_RENDERBUFFER, renderbuffer);
-                    break;
-                  case GL_STENCIL_ATTACHMENT:
-                    framebuffer->setStencilbuffer(GL_RENDERBUFFER, renderbuffer);
-                    break;
-                  default:
-                    return gl::error(GL_INVALID_ENUM);
-                }
+              case GL_DEPTH_ATTACHMENT:
+                framebuffer->setDepthbuffer(GL_RENDERBUFFER, renderbuffer, 0, 0);
+                break;
+              case GL_STENCIL_ATTACHMENT:
+                framebuffer->setStencilbuffer(GL_RENDERBUFFER, renderbuffer, 0, 0);
+                break;
+              case GL_DEPTH_STENCIL_ATTACHMENT:
+                framebuffer->setDepthStencilBuffer(GL_RENDERBUFFER, renderbuffer, 0, 0);
+                break;
+              default:
+                UNREACHABLE();
+                break;
             }
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glFramebufferTexture2D(GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level)
@@ -2436,247 +1579,149 @@ void __stdcall glFramebufferTexture2D(GLenum target, GLenum attachment, GLenum t
     EVENT("(GLenum target = 0x%X, GLenum attachment = 0x%X, GLenum textarget = 0x%X, "
           "GLuint texture = %d, GLint level = %d)", target, attachment, textarget, texture, level);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (target != GL_FRAMEBUFFER && target != GL_DRAW_FRAMEBUFFER_ANGLE && target != GL_READ_FRAMEBUFFER_ANGLE)
+        if (!ValidateFramebufferTexture2D(context, target, attachment, textarget, texture, level))
         {
-            return gl::error(GL_INVALID_ENUM);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (texture == 0)
         {
-            if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
-            {
-                const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
-
-                if (colorAttachment >= context->getMaximumRenderTargets())
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-            }
-            else
-            {
-                switch (attachment)
-                {
-                  case GL_DEPTH_ATTACHMENT:
-                  case GL_STENCIL_ATTACHMENT:
-                    break;
-                  default:
-                    return gl::error(GL_INVALID_ENUM);
-                }
-            }
-
-            if (texture == 0)
-            {
-                textarget = GL_NONE;
-            }
-            else
-            {
-                gl::Texture *tex = context->getTexture(texture);
-
-                if (tex == NULL)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                switch (textarget)
-                {
-                  case GL_TEXTURE_2D:
-                    {
-                        if (tex->getTarget() != GL_TEXTURE_2D)
-                        {
-                            return gl::error(GL_INVALID_OPERATION);
-                        }
-                        gl::Texture2D *tex2d = static_cast<gl::Texture2D *>(tex);
-                        if (tex2d->isCompressed(0))
-                        {
-                            return gl::error(GL_INVALID_OPERATION);
-                        }
-                        break;
-                    }
-
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-                    {
-                        if (tex->getTarget() != GL_TEXTURE_CUBE_MAP)
-                        {
-                            return gl::error(GL_INVALID_OPERATION);
-                        }
-                        gl::TextureCubeMap *texcube = static_cast<gl::TextureCubeMap *>(tex);
-                        if (texcube->isCompressed(textarget, level))
-                        {
-                            return gl::error(GL_INVALID_OPERATION);
-                        }
-                        break;
-                    }
-
-                  default:
-                    return gl::error(GL_INVALID_ENUM);
-                }
-
-                if (level != 0)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-            }
-
-            gl::Framebuffer *framebuffer = NULL;
-            GLuint framebufferHandle = 0;
-            if (target == GL_READ_FRAMEBUFFER_ANGLE)
-            {
-                framebuffer = context->getReadFramebuffer();
-                framebufferHandle = context->getReadFramebufferHandle();
-            }
-            else
-            {
-                framebuffer = context->getDrawFramebuffer();
-                framebufferHandle = context->getDrawFramebufferHandle();
-            }
+            textarget = GL_NONE;
+        }
 
-            if (framebufferHandle == 0 || !framebuffer)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
 
-            if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+        if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+        {
+            const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
+            framebuffer->setColorbuffer(colorAttachment, textarget, texture, level, 0);
+        }
+        else
+        {
+            switch (attachment)
             {
-                const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
-
-                if (colorAttachment >= context->getMaximumRenderTargets())
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-
-                framebuffer->setColorbuffer(colorAttachment, textarget, texture);
-            }
-            else
-            {
-                switch (attachment)
-                {
-                  case GL_DEPTH_ATTACHMENT:   framebuffer->setDepthbuffer(textarget, texture);   break;
-                  case GL_STENCIL_ATTACHMENT: framebuffer->setStencilbuffer(textarget, texture); break;
-                }
+              case GL_DEPTH_ATTACHMENT:         framebuffer->setDepthbuffer(textarget, texture, level, 0);        break;
+              case GL_STENCIL_ATTACHMENT:       framebuffer->setStencilbuffer(textarget, texture, level, 0);      break;
+              case GL_DEPTH_STENCIL_ATTACHMENT: framebuffer->setDepthStencilBuffer(textarget, texture, level, 0); break;
             }
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glFrontFace(GLenum mode)
 {
     EVENT("(GLenum mode = 0x%X)", mode);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (mode)
         {
           case GL_CW:
           case GL_CCW:
-            {
-                gl::Context *context = gl::getNonLostContext();
-
-                if (context)
-                {
-                    context->setFrontFace(mode);
-                }
-            }
+            context->getState().setFrontFace(mode);
             break;
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGenBuffers(GLsizei n, GLuint* buffers)
 {
     EVENT("(GLsizei n = %d, GLuint* buffers = 0x%0.8p)", n, buffers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                buffers[i] = context->createBuffer();
-            }
+            buffers[i] = context->createBuffer();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGenerateMipmap(GLenum target)
 {
     EVENT("(GLenum target = 0x%X)", target);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (!ValidTextureTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        gl::Texture *texture = context->getTargetTexture(target);
+
+        if (texture == NULL)
         {
-            switch (target)
-            {
-              case GL_TEXTURE_2D:
-                {
-                    gl::Texture2D *tex2d = context->getTexture2D();
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-                    if (tex2d->isCompressed(0))
-                    {
-                        return gl::error(GL_INVALID_OPERATION);
-                    }
-                    if (tex2d->isDepth(0))
-                    {
-                        return gl::error(GL_INVALID_OPERATION);
-                    }
+        GLenum internalFormat = texture->getBaseLevelInternalFormat();
+        const gl::TextureCaps &formatCaps = context->getTextureCaps().get(internalFormat);
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
 
-                    tex2d->generateMipmaps();
-                    break;
-                }
+        // GenerateMipmap should not generate an INVALID_OPERATION for textures created with
+        // unsized formats or that are color renderable and filterable.  Since we do not track if
+        // the texture was created with sized or unsized format (only sized formats are stored),
+        // it is not possible to make sure the the LUMA formats can generate mipmaps (they should
+        // be able to) because they aren't color renderable.  Simply do a special case for LUMA
+        // textures since they're the only texture format that can be created with unsized formats
+        // that is not color renderable.  New unsized formats are unlikely to be added, since ES2
+        // was the last version to use add them.
+        bool isLUMA = internalFormat == GL_LUMINANCE8_EXT ||
+                      internalFormat == GL_LUMINANCE8_ALPHA8_EXT ||
+                      internalFormat == GL_ALPHA8_EXT;
 
-              case GL_TEXTURE_CUBE_MAP:
-                {
-                    gl::TextureCubeMap *texcube = context->getTextureCubeMap();
+        if (formatInfo.depthBits > 0 || formatInfo.stencilBits > 0 || !formatCaps.filterable ||
+            (!formatCaps.renderable && !isLUMA) || formatInfo.compressed)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-                    if (texcube->isCompressed(GL_TEXTURE_CUBE_MAP_POSITIVE_X, 0))
-                    {
-                        return gl::error(GL_INVALID_OPERATION);
-                    }
+        // GL_EXT_sRGB does not support mipmap generation on sRGB textures
+        if (context->getClientVersion() == 2 && formatInfo.colorEncoding == GL_SRGB)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-                    texcube->generateMipmaps();
-                    break;
-                }
+        // Non-power of 2 ES2 check
+        if (!context->getExtensions().textureNPOT && (!gl::isPow2(texture->getBaseLevelWidth()) || !gl::isPow2(texture->getBaseLevelHeight())))
+        {
+            ASSERT(context->getClientVersion() <= 2 && (target == GL_TEXTURE_2D || target == GL_TEXTURE_CUBE_MAP));
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-              default:
-                return gl::error(GL_INVALID_ENUM);
+        // Cube completeness check
+        if (target == GL_TEXTURE_CUBE_MAP)
+        {
+            gl::TextureCubeMap *textureCube = static_cast<gl::TextureCubeMap *>(texture);
+            if (!textureCube->isCubeComplete())
+            {
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        texture->generateMipmaps();
     }
 }
 
@@ -2684,135 +1729,100 @@ void __stdcall glGenFencesNV(GLsizei n, GLuint* fences)
 {
     EVENT("(GLsizei n = %d, GLuint* fences = 0x%0.8p)", n, fences);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                fences[i] = context->createFence();
-            }
+            fences[i] = context->createFenceNV();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGenFramebuffers(GLsizei n, GLuint* framebuffers)
 {
     EVENT("(GLsizei n = %d, GLuint* framebuffers = 0x%0.8p)", n, framebuffers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                framebuffers[i] = context->createFramebuffer();
-            }
+            framebuffers[i] = context->createFramebuffer();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGenQueriesEXT(GLsizei n, GLuint* ids)
 {
     EVENT("(GLsizei n = %d, GLuint* ids = 0x%0.8p)", n, ids);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (GLsizei i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                ids[i] = context->createQuery();
-            }
+            ids[i] = context->createQuery();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGenRenderbuffers(GLsizei n, GLuint* renderbuffers)
 {
     EVENT("(GLsizei n = %d, GLuint* renderbuffers = 0x%0.8p)", n, renderbuffers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                renderbuffers[i] = context->createRenderbuffer();
-            }
+            renderbuffers[i] = context->createRenderbuffer();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGenTextures(GLsizei n, GLuint* textures)
 {
-    EVENT("(GLsizei n = %d, GLuint* textures =  0x%0.8p)", n, textures);
+    EVENT("(GLsizei n = %d, GLuint* textures = 0x%0.8p)", n, textures);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        for (int i = 0; i < n; i++)
         {
-            for (int i = 0; i < n; i++)
-            {
-                textures[i] = context->createTexture();
-            }
+            textures[i] = context->createTexture();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetActiveAttrib(GLuint program, GLuint index, GLsizei bufsize, GLsizei *length, GLint *size, GLenum *type, GLchar *name)
@@ -2821,42 +1831,38 @@ void __stdcall glGetActiveAttrib(GLuint program, GLuint index, GLsizei bufsize,
           "GLint *size = 0x%0.8p, GLenum *type = %0.8p, GLchar *name = %0.8p)",
           program, index, bufsize, length, size, type, name);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (bufsize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-
-            if (index >= (GLuint)programObject->getActiveAttributeCount())
+            else
             {
-                return gl::error(GL_INVALID_VALUE);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
 
-            programObject->getActiveAttribute(index, bufsize, length, size, type, name);
+        if (index >= (GLuint)programObject->getActiveAttributeCount())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        programObject->getActiveAttribute(index, bufsize, length, size, type, name);
     }
 }
 
@@ -2866,42 +1872,39 @@ void __stdcall glGetActiveUniform(GLuint program, GLuint index, GLsizei bufsize,
           "GLsizei* length = 0x%0.8p, GLint* size = 0x%0.8p, GLenum* type = 0x%0.8p, GLchar* name = 0x%0.8p)",
           program, index, bufsize, length, size, type, name);
 
-    try
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (bufsize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-
-            if (index >= (GLuint)programObject->getActiveUniformCount())
+            else
             {
-                return gl::error(GL_INVALID_VALUE);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
 
-            programObject->getActiveUniform(index, bufsize, length, size, type, name);
+        if (index >= (GLuint)programObject->getActiveUniformCount())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        programObject->getActiveUniform(index, bufsize, length, size, type, name);
     }
 }
 
@@ -2910,77 +1913,66 @@ void __stdcall glGetAttachedShaders(GLuint program, GLsizei maxcount, GLsizei* c
     EVENT("(GLuint program = %d, GLsizei maxcount = %d, GLsizei* count = 0x%0.8p, GLuint* shaders = 0x%0.8p)",
           program, maxcount, count, shaders);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (maxcount < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            return programObject->getAttachedShaders(maxcount, count, shaders);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        return programObject->getAttachedShaders(maxcount, count, shaders);
     }
 }
 
-int __stdcall glGetAttribLocation(GLuint program, const GLchar* name)
+GLint __stdcall glGetAttribLocation(GLuint program, const GLchar* name)
 {
     EVENT("(GLuint program = %d, const GLchar* name = %s)", program, name);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION, -1);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE, -1);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return -1;
             }
-
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
-            if (!programObject->isLinked() || !programBinary)
+            else
             {
-                return gl::error(GL_INVALID_OPERATION, -1);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return -1;
             }
+        }
 
-            return programBinary->getAttributeLocation(name);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        if (!programObject->isLinked() || !programBinary)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return -1;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, -1);
+
+        return programBinary->getAttributeLocation(name);
     }
 
     return -1;
@@ -2990,62 +1982,24 @@ void __stdcall glGetBooleanv(GLenum pname, GLboolean* params)
 {
     EVENT("(GLenum pname = 0x%X, GLboolean* params = 0x%0.8p)",  pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        GLenum nativeType;
+        unsigned int numParams = 0;
+        if (!ValidateStateQuery(context, pname, &nativeType, &numParams))
         {
-            if (!(context->getBooleanv(pname, params)))
-            {
-                GLenum nativeType;
-                unsigned int numParams = 0;
-                if (!context->getQueryParameterInfo(pname, &nativeType, &numParams))
-                    return gl::error(GL_INVALID_ENUM);
-
-                if (numParams == 0)
-                    return; // it is known that the pname is valid, but there are no parameters to return
-
-                if (nativeType == GL_FLOAT)
-                {
-                    GLfloat *floatParams = NULL;
-                    floatParams = new GLfloat[numParams];
-
-                    context->getFloatv(pname, floatParams);
-
-                    for (unsigned int i = 0; i < numParams; ++i)
-                    {
-                        if (floatParams[i] == 0.0f)
-                            params[i] = GL_FALSE;
-                        else
-                            params[i] = GL_TRUE;
-                    }
-
-                    delete [] floatParams;
-                }
-                else if (nativeType == GL_INT)
-                {
-                    GLint *intParams = NULL;
-                    intParams = new GLint[numParams];
-
-                    context->getIntegerv(pname, intParams);
-
-                    for (unsigned int i = 0; i < numParams; ++i)
-                    {
-                        if (intParams[i] == 0)
-                            params[i] = GL_FALSE;
-                        else
-                            params[i] = GL_TRUE;
-                    }
+            return;
+        }
 
-                    delete [] intParams;
-                }
-            }
+        if (nativeType == GL_BOOL)
+        {
+            context->getBooleanv(pname, params);
+        }
+        else
+        {
+            CastStateValues(context, nativeType, pname, numParams, params);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
     }
 }
 
@@ -3053,47 +2007,53 @@ void __stdcall glGetBufferParameteriv(GLenum target, GLenum pname, GLint* params
 {
     EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", target, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        if (!gl::ValidBufferParameter(context, pname))
         {
-            gl::Buffer *buffer;
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            switch (target)
-            {
-              case GL_ARRAY_BUFFER:
-                buffer = context->getArrayBuffer();
-                break;
-              case GL_ELEMENT_ARRAY_BUFFER:
-                buffer = context->getElementArrayBuffer();
-                break;
-              default: return gl::error(GL_INVALID_ENUM);
-            }
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
 
-            if (!buffer)
-            {
-                // A null buffer means that "0" is bound to the requested buffer target
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        if (!buffer)
+        {
+            // A null buffer means that "0" is bound to the requested buffer target
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            switch (pname)
-            {
-              case GL_BUFFER_USAGE:
-                *params = buffer->usage();
-                break;
-              case GL_BUFFER_SIZE:
-                *params = buffer->size();
-                break;
-              default: return gl::error(GL_INVALID_ENUM);
-            }
+        switch (pname)
+        {
+          case GL_BUFFER_USAGE:
+            *params = static_cast<GLint>(buffer->getUsage());
+            break;
+          case GL_BUFFER_SIZE:
+            *params = gl::clampCast<GLint>(buffer->getSize());
+            break;
+          case GL_BUFFER_ACCESS_FLAGS:
+            *params = buffer->getAccessFlags();
+            break;
+          case GL_BUFFER_MAPPED:
+            *params = static_cast<GLint>(buffer->isMapped());
+            break;
+          case GL_BUFFER_MAP_OFFSET:
+            *params = gl::clampCast<GLint>(buffer->getMapOffset());
+            break;
+          case GL_BUFFER_MAP_LENGTH:
+            *params = gl::clampCast<GLint>(buffer->getMapLength());
+            break;
+          default: UNREACHABLE(); break;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 GLenum __stdcall glGetError(void)
@@ -3114,26 +2074,35 @@ void __stdcall glGetFenceivNV(GLuint fence, GLenum pname, GLint *params)
 {
     EVENT("(GLuint fence = %d, GLenum pname = 0x%X, GLint *params = 0x%0.8p)", fence, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-    
-        gl::Context *context = gl::getNonLostContext();
+        gl::FenceNV *fenceObject = context->getFenceNV(fence);
 
-        if (context)
+        if (fenceObject == NULL)
         {
-            gl::Fence *fenceObject = context->getFence(fence);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (fenceObject == NULL)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        if (fenceObject->isFence() != GL_TRUE)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_FENCE_STATUS_NV:
+          case GL_FENCE_CONDITION_NV:
+            break;
 
-            fenceObject->getFenceiv(pname, params);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        params[0] = fenceObject->getFencei(pname);
     }
 }
 
@@ -3141,59 +2110,24 @@ void __stdcall glGetFloatv(GLenum pname, GLfloat* params)
 {
     EVENT("(GLenum pname = 0x%X, GLfloat* params = 0x%0.8p)", pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        GLenum nativeType;
+        unsigned int numParams = 0;
+        if (!ValidateStateQuery(context, pname, &nativeType, &numParams))
         {
-            if (!(context->getFloatv(pname, params)))
-            {
-                GLenum nativeType;
-                unsigned int numParams = 0;
-                if (!context->getQueryParameterInfo(pname, &nativeType, &numParams))
-                    return gl::error(GL_INVALID_ENUM);
-
-                if (numParams == 0)
-                    return; // it is known that the pname is valid, but that there are no parameters to return.
-
-                if (nativeType == GL_BOOL)
-                {
-                    GLboolean *boolParams = NULL;
-                    boolParams = new GLboolean[numParams];
-
-                    context->getBooleanv(pname, boolParams);
-
-                    for (unsigned int i = 0; i < numParams; ++i)
-                    {
-                        if (boolParams[i] == GL_FALSE)
-                            params[i] = 0.0f;
-                        else
-                            params[i] = 1.0f;
-                    }
-
-                    delete [] boolParams;
-                }
-                else if (nativeType == GL_INT)
-                {
-                    GLint *intParams = NULL;
-                    intParams = new GLint[numParams];
-
-                    context->getIntegerv(pname, intParams);
-
-                    for (unsigned int i = 0; i < numParams; ++i)
-                    {
-                        params[i] = (GLfloat)intParams[i];
-                    }
+            return;
+        }
 
-                    delete [] intParams;
-                }
-            }
+        if (nativeType == GL_FLOAT)
+        {
+            context->getFloatv(pname, params);
+        }
+        else
+        {
+            CastStateValues(context, nativeType, pname, numParams, params);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
     }
 }
 
@@ -3202,219 +2136,335 @@ void __stdcall glGetFramebufferAttachmentParameteriv(GLenum target, GLenum attac
     EVENT("(GLenum target = 0x%X, GLenum attachment = 0x%X, GLenum pname = 0x%X, GLint* params = 0x%0.8p)",
           target, attachment, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (!gl::ValidFramebufferTarget(target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        int clientVersion = context->getClientVersion();
+
+        switch (pname)
         {
-            if (target != GL_FRAMEBUFFER && target != GL_DRAW_FRAMEBUFFER_ANGLE && target != GL_READ_FRAMEBUFFER_ANGLE)
-            {
-                return gl::error(GL_INVALID_ENUM);
-            }
+          case GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE:
+          case GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME:
+          case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL:
+          case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE:
+            break;
 
-            gl::Framebuffer *framebuffer = NULL;
-            if (target == GL_READ_FRAMEBUFFER_ANGLE)
+          case GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING:
+            if (clientVersion < 3 && !context->getExtensions().sRGB)
             {
-                if(context->getReadFramebufferHandle() == 0)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            break;
 
-                framebuffer = context->getReadFramebuffer();
+          case GL_FRAMEBUFFER_ATTACHMENT_RED_SIZE:
+          case GL_FRAMEBUFFER_ATTACHMENT_GREEN_SIZE:
+          case GL_FRAMEBUFFER_ATTACHMENT_BLUE_SIZE:
+          case GL_FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE:
+          case GL_FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE:
+          case GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE:
+          case GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE:
+          case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER:
+            if (clientVersion < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
-            else 
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        // Determine if the attachment is a valid enum
+        switch (attachment)
+        {
+          case GL_BACK:
+          case GL_FRONT:
+          case GL_DEPTH:
+          case GL_STENCIL:
+          case GL_DEPTH_STENCIL_ATTACHMENT:
+            if (clientVersion < 3)
             {
-                if (context->getDrawFramebufferHandle() == 0)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            break;
 
-                framebuffer = context->getDrawFramebuffer();
+          case GL_DEPTH_ATTACHMENT:
+          case GL_STENCIL_ATTACHMENT:
+            break;
+
+          default:
+            if (attachment < GL_COLOR_ATTACHMENT0_EXT ||
+                (attachment - GL_COLOR_ATTACHMENT0_EXT) >= context->getCaps().maxColorAttachments)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
+            break;
+        }
 
-            GLenum attachmentType;
-            GLuint attachmentHandle;
+        GLuint framebufferHandle = context->getState().getTargetFramebuffer(target)->id();
+        gl::Framebuffer *framebuffer = context->getFramebuffer(framebufferHandle);
 
-            if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+        if (framebufferHandle == 0)
+        {
+            if (clientVersion < 3)
             {
-                const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
 
-                if (colorAttachment >= context->getMaximumRenderTargets())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
+            switch (attachment)
+            {
+              case GL_BACK:
+              case GL_DEPTH:
+              case GL_STENCIL:
+                break;
 
-                attachmentType = framebuffer->getColorbufferType(colorAttachment);
-                attachmentHandle = framebuffer->getColorbufferHandle(colorAttachment);
+              default:
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+        }
+        else
+        {
+            if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+            {
+                // Valid attachment query
             }
             else
             {
                 switch (attachment)
                 {
                   case GL_DEPTH_ATTACHMENT:
-                    attachmentType = framebuffer->getDepthbufferType();
-                    attachmentHandle = framebuffer->getDepthbufferHandle();
-                    break;
                   case GL_STENCIL_ATTACHMENT:
-                    attachmentType = framebuffer->getStencilbufferType();
-                    attachmentHandle = framebuffer->getStencilbufferHandle();
                     break;
-                  default: return gl::error(GL_INVALID_ENUM);
+
+                  case GL_DEPTH_STENCIL_ATTACHMENT:
+                    if (framebuffer->hasValidDepthStencil())
+                    {
+                        context->recordError(gl::Error(GL_INVALID_OPERATION));
+                        return;
+                    }
+                    break;
+
+                  default:
+                    context->recordError(gl::Error(GL_INVALID_OPERATION));
+                    return;
                 }
             }
+        }
 
-            GLenum attachmentObjectType;   // Type category
-            if (attachmentType == GL_NONE || attachmentType == GL_RENDERBUFFER)
-            {
-                attachmentObjectType = attachmentType;
-            }
-            else if (gl::IsInternalTextureTarget(attachmentType))
-            {
-                attachmentObjectType = GL_TEXTURE;
-            }
-            else
-            {
-                UNREACHABLE();
-                return;
-            }
+        GLenum attachmentType = GL_NONE;
+        GLuint attachmentHandle = 0;
+        GLuint attachmentLevel = 0;
+        GLuint attachmentLayer = 0;
+
+        const gl::FramebufferAttachment *attachmentObject = framebuffer->getAttachment(attachment);
+
+        if (attachmentObject)
+        {
+            attachmentType = attachmentObject->type();
+            attachmentHandle = attachmentObject->id();
+            attachmentLevel = attachmentObject->mipLevel();
+            attachmentLayer = attachmentObject->layer();
+        }
+
+        GLenum attachmentObjectType;   // Type category
+        if (framebufferHandle == 0)
+        {
+            attachmentObjectType = GL_FRAMEBUFFER_DEFAULT;
+        }
+        else if (attachmentType == GL_NONE || attachmentType == GL_RENDERBUFFER)
+        {
+            attachmentObjectType = attachmentType;
+        }
+        else if (gl::ValidTexture2DDestinationTarget(context, attachmentType))
+        {
+            attachmentObjectType = GL_TEXTURE;
+        }
+        else
+        {
+            UNREACHABLE();
+            return;
+        }
+
+        if (attachmentObjectType == GL_NONE)
+        {
+            // ES 2.0.25 spec pg 127 states that if the value of FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE
+            // is NONE, then querying any other pname will generate INVALID_ENUM.
+
+            // ES 3.0.2 spec pg 235 states that if the attachment type is none,
+            // GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME will return zero and be an
+            // INVALID_OPERATION for all other pnames
 
             switch (pname)
             {
               case GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE:
                 *params = attachmentObjectType;
                 break;
+
               case GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME:
-                if (attachmentObjectType == GL_RENDERBUFFER || attachmentObjectType == GL_TEXTURE)
+                if (clientVersion < 3)
+                {
+                    context->recordError(gl::Error(GL_INVALID_ENUM));
+                    return;
+                }
+                *params = 0;
+                break;
+
+              default:
+                if (clientVersion < 3)
                 {
-                    *params = attachmentHandle;
+                    context->recordError(gl::Error(GL_INVALID_ENUM));
+                    return;
                 }
                 else
                 {
-                    return gl::error(GL_INVALID_ENUM);
+                    context->recordError(gl::Error(GL_INVALID_OPERATION));
+                    return;
                 }
+            }
+        }
+        else
+        {
+            ASSERT(attachmentObjectType == GL_RENDERBUFFER || attachmentObjectType == GL_TEXTURE ||
+                   attachmentObjectType == GL_FRAMEBUFFER_DEFAULT);
+            ASSERT(attachmentObject != NULL);
+
+            switch (pname)
+            {
+              case GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE:
+                *params = attachmentObjectType;
                 break;
-              case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL:
-                if (attachmentObjectType == GL_TEXTURE)
+
+              case GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME:
+                if (attachmentObjectType != GL_RENDERBUFFER && attachmentObjectType != GL_TEXTURE)
                 {
-                    *params = 0; // FramebufferTexture2D will not allow level to be set to anything else in GL ES 2.0
+                    context->recordError(gl::Error(GL_INVALID_ENUM));
+                    return;
                 }
-                else
+                *params = attachmentHandle;
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL:
+                if (attachmentObjectType != GL_TEXTURE)
                 {
-                    return gl::error(GL_INVALID_ENUM);
+                    context->recordError(gl::Error(GL_INVALID_ENUM));
+                    return;
                 }
+                *params = attachmentLevel;
                 break;
+
               case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE:
-                if (attachmentObjectType == GL_TEXTURE)
+                if (attachmentObjectType != GL_TEXTURE)
                 {
-                    if (gl::IsCubemapTextureTarget(attachmentType))
-                    {
-                        *params = attachmentType;
-                    }
-                    else
-                    {
-                        *params = 0;
-                    }
+                    context->recordError(gl::Error(GL_INVALID_ENUM));
+                    return;
                 }
-                else
+                *params = gl::IsCubemapTextureTarget(attachmentType) ? attachmentType : 0;
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_RED_SIZE:
+                *params = attachmentObject->getRedSize();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_GREEN_SIZE:
+                *params = attachmentObject->getGreenSize();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_BLUE_SIZE:
+                *params = attachmentObject->getBlueSize();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE:
+                *params = attachmentObject->getAlphaSize();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE:
+                *params = attachmentObject->getDepthSize();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE:
+                *params = attachmentObject->getStencilSize();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE:
+                if (attachment == GL_DEPTH_STENCIL_ATTACHMENT)
                 {
-                    return gl::error(GL_INVALID_ENUM);
+                    context->recordError(gl::Error(GL_INVALID_OPERATION));
+                    return;
                 }
+                *params = attachmentObject->getComponentType();
                 break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING:
+                *params = attachmentObject->getColorEncoding();
+                break;
+
+              case GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER:
+                if (attachmentObjectType != GL_TEXTURE)
+                {
+                    context->recordError(gl::Error(GL_INVALID_ENUM));
+                    return;
+                }
+                *params = attachmentLayer;
+                break;
+
               default:
-                return gl::error(GL_INVALID_ENUM);
+                UNREACHABLE();
+                break;
             }
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 GLenum __stdcall glGetGraphicsResetStatusEXT(void)
 {
     EVENT("()");
 
-    try
-    {
-        gl::Context *context = gl::getContext();
-
-        if (context)
-        {
-            return context->getResetStatus();
-        }
+    gl::Context *context = gl::getContext();
 
-        return GL_NO_ERROR;
-    }
-    catch(std::bad_alloc&)
+    if (context)
     {
-        return GL_OUT_OF_MEMORY;
+        return context->getResetStatus();
     }
+
+    return GL_NO_ERROR;
 }
 
 void __stdcall glGetIntegerv(GLenum pname, GLint* params)
 {
     EVENT("(GLenum pname = 0x%X, GLint* params = 0x%0.8p)", pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        GLenum nativeType;
+        unsigned int numParams = 0;
 
-        if (context)
+        if (!ValidateStateQuery(context, pname, &nativeType, &numParams))
         {
-            if (!(context->getIntegerv(pname, params)))
-            {
-                GLenum nativeType;
-                unsigned int numParams = 0;
-                if (!context->getQueryParameterInfo(pname, &nativeType, &numParams))
-                    return gl::error(GL_INVALID_ENUM);
-
-                if (numParams == 0)
-                    return; // it is known that pname is valid, but there are no parameters to return
-
-                if (nativeType == GL_BOOL)
-                {
-                    GLboolean *boolParams = NULL;
-                    boolParams = new GLboolean[numParams];
-
-                    context->getBooleanv(pname, boolParams);
-
-                    for (unsigned int i = 0; i < numParams; ++i)
-                    {
-                        if (boolParams[i] == GL_FALSE)
-                            params[i] = 0;
-                        else
-                            params[i] = 1;
-                    }
-
-                    delete [] boolParams;
-                }
-                else if (nativeType == GL_FLOAT)
-                {
-                    GLfloat *floatParams = NULL;
-                    floatParams = new GLfloat[numParams];
-
-                    context->getFloatv(pname, floatParams);
-
-                    for (unsigned int i = 0; i < numParams; ++i)
-                    {
-                        if (pname == GL_DEPTH_RANGE || pname == GL_COLOR_CLEAR_VALUE || pname == GL_DEPTH_CLEAR_VALUE || pname == GL_BLEND_COLOR)
-                        {
-                            params[i] = (GLint)(((GLfloat)(0xFFFFFFFF) * floatParams[i] - 1.0f) / 2.0f);
-                        }
-                        else
-                            params[i] = (GLint)(floatParams[i] > 0.0f ? floor(floatParams[i] + 0.5) : ceil(floatParams[i] - 0.5));
-                    }
+            return;
+        }
 
-                    delete [] floatParams;
-                }
-            }
+        if (nativeType == GL_INT)
+        {
+            context->getIntegerv(pname, params);
+        }
+        else
+        {
+            CastStateValues(context, nativeType, pname, numParams, params);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
     }
 }
 
@@ -3422,59 +2472,83 @@ void __stdcall glGetProgramiv(GLuint program, GLenum pname, GLint* params)
 {
     EVENT("(GLuint program = %d, GLenum pname = %d, GLint* params = 0x%0.8p)", program, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
+        if (context->getClientVersion() < 3)
+        {
             switch (pname)
             {
-              case GL_DELETE_STATUS:
-                *params = programObject->isFlaggedForDeletion();
-                return;
-              case GL_LINK_STATUS:
-                *params = programObject->isLinked();
-                return;
-              case GL_VALIDATE_STATUS:
-                *params = programObject->isValidated();
-                return;
-              case GL_INFO_LOG_LENGTH:
-                *params = programObject->getInfoLogLength();
-                return;
-              case GL_ATTACHED_SHADERS:
-                *params = programObject->getAttachedShadersCount();
-                return;
-              case GL_ACTIVE_ATTRIBUTES:
-                *params = programObject->getActiveAttributeCount();
-                return;
-              case GL_ACTIVE_ATTRIBUTE_MAX_LENGTH:
-                *params = programObject->getActiveAttributeMaxLength();
-                return;
-              case GL_ACTIVE_UNIFORMS:
-                *params = programObject->getActiveUniformCount();
-                return;
-              case GL_ACTIVE_UNIFORM_MAX_LENGTH:
-                *params = programObject->getActiveUniformMaxLength();
+              case GL_ACTIVE_UNIFORM_BLOCKS:
+              case GL_ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH:
+              case GL_TRANSFORM_FEEDBACK_BUFFER_MODE:
+              case GL_TRANSFORM_FEEDBACK_VARYINGS:
+              case GL_TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH:
+                context->recordError(gl::Error(GL_INVALID_ENUM));
                 return;
-              case GL_PROGRAM_BINARY_LENGTH_OES:
-                *params = programObject->getProgramBinaryLength();
-                return;
-              default:
-                return gl::error(GL_INVALID_ENUM);
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        switch (pname)
+        {
+          case GL_DELETE_STATUS:
+            *params = programObject->isFlaggedForDeletion();
+            return;
+          case GL_LINK_STATUS:
+            *params = programObject->isLinked();
+            return;
+          case GL_VALIDATE_STATUS:
+            *params = programObject->isValidated();
+            return;
+          case GL_INFO_LOG_LENGTH:
+            *params = programObject->getInfoLogLength();
+            return;
+          case GL_ATTACHED_SHADERS:
+            *params = programObject->getAttachedShadersCount();
+            return;
+          case GL_ACTIVE_ATTRIBUTES:
+            *params = programObject->getActiveAttributeCount();
+            return;
+          case GL_ACTIVE_ATTRIBUTE_MAX_LENGTH:
+            *params = programObject->getActiveAttributeMaxLength();
+            return;
+          case GL_ACTIVE_UNIFORMS:
+            *params = programObject->getActiveUniformCount();
+            return;
+          case GL_ACTIVE_UNIFORM_MAX_LENGTH:
+            *params = programObject->getActiveUniformMaxLength();
+            return;
+          case GL_PROGRAM_BINARY_LENGTH_OES:
+            *params = programObject->getProgramBinaryLength();
+            return;
+          case GL_ACTIVE_UNIFORM_BLOCKS:
+            *params = programObject->getActiveUniformBlockCount();
+            return;
+          case GL_ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH:
+            *params = programObject->getActiveUniformBlockMaxLength();
+            break;
+          case GL_TRANSFORM_FEEDBACK_BUFFER_MODE:
+            *params = programObject->getTransformFeedbackBufferMode();
+            break;
+          case GL_TRANSFORM_FEEDBACK_VARYINGS:
+            *params = programObject->getTransformFeedbackVaryingCount();
+            break;
+          case GL_TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH:
+            *params = programObject->getTransformFeedbackVaryingMaxLength();
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
     }
 }
 
@@ -3483,30 +2557,24 @@ void __stdcall glGetProgramInfoLog(GLuint program, GLsizei bufsize, GLsizei* len
     EVENT("(GLuint program = %d, GLsizei bufsize = %d, GLsizei* length = 0x%0.8p, GLchar* infolog = 0x%0.8p)",
           program, bufsize, length, infolog);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (bufsize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            programObject->getInfoLog(bufsize, length, infolog);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        programObject->getInfoLog(bufsize, length, infolog);
     }
 }
 
@@ -3514,178 +2582,170 @@ void __stdcall glGetQueryivEXT(GLenum target, GLenum pname, GLint *params)
 {
     EVENT("GLenum target = 0x%X, GLenum pname = 0x%X, GLint *params = 0x%0.8p)", target, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
+        if (!ValidQueryType(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
         switch (pname)
         {
           case GL_CURRENT_QUERY_EXT:
+            params[0] = context->getState().getActiveQueryId(target);
             break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        gl::Context *context = gl::getNonLostContext();
 
-        if (context)
-        {
-            params[0] = context->getActiveQuery(target);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetQueryObjectuivEXT(GLuint id, GLenum pname, GLuint *params)
 {
     EVENT("(GLuint id = %d, GLenum pname = 0x%X, GLuint *params = 0x%0.8p)", id, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        switch (pname)
+        gl::Query *queryObject = context->getQuery(id, false, GL_NONE);
+
+        if (!queryObject)
         {
-          case GL_QUERY_RESULT_EXT:
-          case GL_QUERY_RESULT_AVAILABLE_EXT:
-            break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-        gl::Context *context = gl::getNonLostContext();
 
-        if (context)
+        if (context->getState().getActiveQueryId(queryObject->getType()) == id)
         {
-            gl::Query *queryObject = context->getQuery(id, false, GL_NONE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (!queryObject)
+        switch(pname)
+        {
+          case GL_QUERY_RESULT_EXT:
             {
-                return gl::error(GL_INVALID_OPERATION);
+                gl::Error error = queryObject->getResult(params);
+                if (error.isError())
+                {
+                    context->recordError(error);
+                    return;
+                }
             }
+            break;
 
-            if (context->getActiveQuery(queryObject->getType()) == id)
+          case GL_QUERY_RESULT_AVAILABLE_EXT:
             {
-                return gl::error(GL_INVALID_OPERATION);
+                gl::Error error = queryObject->isResultAvailable(params);
+                if (error.isError())
+                {
+                    context->recordError(error);
+                    return;
+                }
             }
+            break;
 
-            switch(pname)
-            {
-              case GL_QUERY_RESULT_EXT:
-                params[0] = queryObject->getResult();
-                break;
-              case GL_QUERY_RESULT_AVAILABLE_EXT:
-                params[0] = queryObject->isResultAvailable();
-                break;
-              default:
-                ASSERT(false);
-            }
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetRenderbufferParameteriv(GLenum target, GLenum pname, GLint* params)
 {
     EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", target, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (target != GL_RENDERBUFFER)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        if (context->getState().getRenderbufferId() == 0)
         {
-            if (target != GL_RENDERBUFFER)
-            {
-                return gl::error(GL_INVALID_ENUM);
-            }
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (context->getRenderbufferHandle() == 0)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        gl::Renderbuffer *renderbuffer = context->getRenderbuffer(context->getState().getRenderbufferId());
 
-            gl::Renderbuffer *renderbuffer = context->getRenderbuffer(context->getRenderbufferHandle());
+        switch (pname)
+        {
+          case GL_RENDERBUFFER_WIDTH:           *params = renderbuffer->getWidth();          break;
+          case GL_RENDERBUFFER_HEIGHT:          *params = renderbuffer->getHeight();         break;
+          case GL_RENDERBUFFER_INTERNAL_FORMAT: *params = renderbuffer->getInternalFormat(); break;
+          case GL_RENDERBUFFER_RED_SIZE:        *params = renderbuffer->getRedSize();        break;
+          case GL_RENDERBUFFER_GREEN_SIZE:      *params = renderbuffer->getGreenSize();      break;
+          case GL_RENDERBUFFER_BLUE_SIZE:       *params = renderbuffer->getBlueSize();       break;
+          case GL_RENDERBUFFER_ALPHA_SIZE:      *params = renderbuffer->getAlphaSize();      break;
+          case GL_RENDERBUFFER_DEPTH_SIZE:      *params = renderbuffer->getDepthSize();      break;
+          case GL_RENDERBUFFER_STENCIL_SIZE:    *params = renderbuffer->getStencilSize();    break;
 
-            switch (pname)
+          case GL_RENDERBUFFER_SAMPLES_ANGLE:
+            if (!context->getExtensions().framebufferMultisample)
             {
-              case GL_RENDERBUFFER_WIDTH:           *params = renderbuffer->getWidth();          break;
-              case GL_RENDERBUFFER_HEIGHT:          *params = renderbuffer->getHeight();         break;
-              case GL_RENDERBUFFER_INTERNAL_FORMAT: *params = renderbuffer->getInternalFormat(); break;
-              case GL_RENDERBUFFER_RED_SIZE:        *params = renderbuffer->getRedSize();        break;
-              case GL_RENDERBUFFER_GREEN_SIZE:      *params = renderbuffer->getGreenSize();      break;
-              case GL_RENDERBUFFER_BLUE_SIZE:       *params = renderbuffer->getBlueSize();       break;
-              case GL_RENDERBUFFER_ALPHA_SIZE:      *params = renderbuffer->getAlphaSize();      break;
-              case GL_RENDERBUFFER_DEPTH_SIZE:      *params = renderbuffer->getDepthSize();      break;
-              case GL_RENDERBUFFER_STENCIL_SIZE:    *params = renderbuffer->getStencilSize();    break;
-              case GL_RENDERBUFFER_SAMPLES_ANGLE:
-                if (context->getMaxSupportedSamples() != 0)
-                {
-                    *params = renderbuffer->getSamples();
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
+            *params = renderbuffer->getSamples();
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetShaderiv(GLuint shader, GLenum pname, GLint* params)
 {
     EVENT("(GLuint shader = %d, GLenum pname = %d, GLint* params = 0x%0.8p)", shader, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            if (!shaderObject)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
+        switch (pname)
+        {
+          case GL_SHADER_TYPE:
+            *params = shaderObject->getType();
+            return;
+          case GL_DELETE_STATUS:
+            *params = shaderObject->isFlaggedForDeletion();
+            return;
+          case GL_COMPILE_STATUS:
+            *params = shaderObject->isCompiled() ? GL_TRUE : GL_FALSE;
+            return;
+          case GL_INFO_LOG_LENGTH:
+            *params = shaderObject->getInfoLogLength();
+            return;
+          case GL_SHADER_SOURCE_LENGTH:
+            *params = shaderObject->getSourceLength();
+            return;
+          case GL_TRANSLATED_SHADER_SOURCE_LENGTH_ANGLE:
+            *params = shaderObject->getTranslatedSourceLength();
+            return;
 
-            switch (pname)
-            {
-              case GL_SHADER_TYPE:
-                *params = shaderObject->getType();
-                return;
-              case GL_DELETE_STATUS:
-                *params = shaderObject->isFlaggedForDeletion();
-                return;
-              case GL_COMPILE_STATUS:
-                *params = shaderObject->isCompiled() ? GL_TRUE : GL_FALSE;
-                return;
-              case GL_INFO_LOG_LENGTH:
-                *params = shaderObject->getInfoLogLength();
-                return;
-              case GL_SHADER_SOURCE_LENGTH:
-                *params = shaderObject->getSourceLength();
-                return;
-              case GL_TRANSLATED_SHADER_SOURCE_LENGTH_ANGLE:
-                *params = shaderObject->getTranslatedSourceLength();
-                return;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetShaderInfoLog(GLuint shader, GLsizei bufsize, GLsizei* length, GLchar* infolog)
@@ -3693,30 +2753,24 @@ void __stdcall glGetShaderInfoLog(GLuint shader, GLsizei bufsize, GLsizei* lengt
     EVENT("(GLuint shader = %d, GLsizei bufsize = %d, GLsizei* length = 0x%0.8p, GLchar* infolog = 0x%0.8p)",
           shader, bufsize, length, infolog);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (bufsize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (!shaderObject)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            shaderObject->getInfoLog(bufsize, length, infolog);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        shaderObject->getInfoLog(bufsize, length, infolog);
     }
 }
 
@@ -3725,15 +2779,18 @@ void __stdcall glGetShaderPrecisionFormat(GLenum shadertype, GLenum precisiontyp
     EVENT("(GLenum shadertype = 0x%X, GLenum precisiontype = 0x%X, GLint* range = 0x%0.8p, GLint* precision = 0x%0.8p)",
           shadertype, precisiontype, range, precision);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (shadertype)
         {
           case GL_VERTEX_SHADER:
           case GL_FRAGMENT_SHADER:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (precisiontype)
@@ -3746,6 +2803,7 @@ void __stdcall glGetShaderPrecisionFormat(GLenum shadertype, GLenum precisiontyp
             range[1] = 127;
             *precision = 23;
             break;
+
           case GL_LOW_INT:
           case GL_MEDIUM_INT:
           case GL_HIGH_INT:
@@ -3755,14 +2813,12 @@ void __stdcall glGetShaderPrecisionFormat(GLenum shadertype, GLenum precisiontyp
             range[1] = 24;
             *precision = 0;
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetShaderSource(GLuint shader, GLsizei bufsize, GLsizei* length, GLchar* source)
@@ -3770,30 +2826,24 @@ void __stdcall glGetShaderSource(GLuint shader, GLsizei bufsize, GLsizei* length
     EVENT("(GLuint shader = %d, GLsizei bufsize = %d, GLsizei* length = 0x%0.8p, GLchar* source = 0x%0.8p)",
           shader, bufsize, length, source);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (bufsize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (!shaderObject)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            shaderObject->getSource(bufsize, length, source);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        shaderObject->getSource(bufsize, length, source);
     }
 }
 
@@ -3802,30 +2852,24 @@ void __stdcall glGetTranslatedShaderSourceANGLE(GLuint shader, GLsizei bufsize,
     EVENT("(GLuint shader = %d, GLsizei bufsize = %d, GLsizei* length = 0x%0.8p, GLchar* source = 0x%0.8p)",
           shader, bufsize, length, source);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (bufsize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (!shaderObject)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            shaderObject->getTranslatedSource(bufsize, length, source);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        shaderObject->getTranslatedSource(bufsize, length, source);
     }
 }
 
@@ -3833,29 +2877,45 @@ const GLubyte* __stdcall glGetString(GLenum name)
 {
     EVENT("(GLenum name = 0x%X)", name);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+
+    switch (name)
     {
-        gl::Context *context = gl::getNonLostContext();
+      case GL_VENDOR:
+        return (GLubyte*)"Google Inc.";
 
-        switch (name)
+      case GL_RENDERER:
+        return (GLubyte*)((context != NULL) ? context->getRendererString().c_str() : "ANGLE");
+
+      case GL_VERSION:
+        if (context->getClientVersion() == 2)
         {
-          case GL_VENDOR:
-            return (GLubyte*)"Google Inc.";
-          case GL_RENDERER:
-            return (GLubyte*)((context != NULL) ? context->getRendererString() : "ANGLE");
-          case GL_VERSION:
             return (GLubyte*)"OpenGL ES 2.0 (ANGLE " ANGLE_VERSION_STRING ")";
-          case GL_SHADING_LANGUAGE_VERSION:
+        }
+        else
+        {
+            return (GLubyte*)"OpenGL ES 3.0 (ANGLE " ANGLE_VERSION_STRING ")";
+        }
+
+      case GL_SHADING_LANGUAGE_VERSION:
+        if (context->getClientVersion() == 2)
+        {
             return (GLubyte*)"OpenGL ES GLSL ES 1.00 (ANGLE " ANGLE_VERSION_STRING ")";
-          case GL_EXTENSIONS:
-            return (GLubyte*)((context != NULL) ? context->getExtensionString() : "");
-          default:
-            return gl::error(GL_INVALID_ENUM, (GLubyte*)NULL);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, (GLubyte*)NULL);
+        else
+        {
+            return (GLubyte*)"OpenGL ES GLSL ES 3.00 (ANGLE " ANGLE_VERSION_STRING ")";
+        }
+
+      case GL_EXTENSIONS:
+        return (GLubyte*)((context != NULL) ? context->getExtensionString().c_str() : "");
+
+      default:
+        if (context)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+        }
+        return NULL;
     }
 }
 
@@ -3863,124 +2923,264 @@ void __stdcall glGetTexParameterfv(GLenum target, GLenum pname, GLfloat* params)
 {
     EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLfloat* params = 0x%0.8p)", target, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Texture *texture = context->getTargetTexture(target);
 
-        if (context)
+        if (!texture)
         {
-            gl::Texture *texture;
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            switch (target)
+        switch (pname)
+        {
+          case GL_TEXTURE_MAG_FILTER:
+            *params = (GLfloat)texture->getSamplerState().magFilter;
+            break;
+          case GL_TEXTURE_MIN_FILTER:
+            *params = (GLfloat)texture->getSamplerState().minFilter;
+            break;
+          case GL_TEXTURE_WRAP_S:
+            *params = (GLfloat)texture->getSamplerState().wrapS;
+            break;
+          case GL_TEXTURE_WRAP_T:
+            *params = (GLfloat)texture->getSamplerState().wrapT;
+            break;
+          case GL_TEXTURE_WRAP_R:
+            if (context->getClientVersion() < 3)
             {
-              case GL_TEXTURE_2D:
-                texture = context->getTexture2D();
-                break;
-              case GL_TEXTURE_CUBE_MAP:
-                texture = context->getTextureCubeMap();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
-
-            switch (pname)
+            *params = (GLfloat)texture->getSamplerState().wrapR;
+            break;
+          case GL_TEXTURE_IMMUTABLE_FORMAT:
+            // Exposed to ES2.0 through EXT_texture_storage, no client version validation.
+            *params = (GLfloat)(texture->isImmutable() ? GL_TRUE : GL_FALSE);
+            break;
+          case GL_TEXTURE_IMMUTABLE_LEVELS:
+            if (context->getClientVersion() < 3)
             {
-              case GL_TEXTURE_MAG_FILTER:
-                *params = (GLfloat)texture->getMagFilter();
-                break;
-              case GL_TEXTURE_MIN_FILTER:
-                *params = (GLfloat)texture->getMinFilter();
-                break;
-              case GL_TEXTURE_WRAP_S:
-                *params = (GLfloat)texture->getWrapS();
-                break;
-              case GL_TEXTURE_WRAP_T:
-                *params = (GLfloat)texture->getWrapT();
-                break;
-              case GL_TEXTURE_IMMUTABLE_FORMAT_EXT:
-                *params = (GLfloat)(texture->isImmutable() ? GL_TRUE : GL_FALSE);
-                break;
-              case GL_TEXTURE_USAGE_ANGLE:
-                *params = (GLfloat)texture->getUsage();
-                break;
-              case GL_TEXTURE_MAX_ANISOTROPY_EXT:
-                if (!context->supportsTextureFilterAnisotropy())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                *params = (GLfloat)texture->getMaxAnisotropy();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->immutableLevelCount();
+            break;
+          case GL_TEXTURE_USAGE_ANGLE:
+            *params = (GLfloat)texture->getUsage();
+            break;
+          case GL_TEXTURE_MAX_ANISOTROPY_EXT:
+            if (!context->getExtensions().textureFilterAnisotropic)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->getSamplerState().maxAnisotropy;
+            break;
+          case GL_TEXTURE_SWIZZLE_R:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->getSamplerState().swizzleRed;
+            break;
+          case GL_TEXTURE_SWIZZLE_G:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->getSamplerState().swizzleGreen;
+            break;
+          case GL_TEXTURE_SWIZZLE_B:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
+            *params = (GLfloat)texture->getSamplerState().swizzleBlue;
+            break;
+          case GL_TEXTURE_SWIZZLE_A:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->getSamplerState().swizzleAlpha;
+            break;
+          case GL_TEXTURE_BASE_LEVEL:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->getSamplerState().baseLevel;
+            break;
+          case GL_TEXTURE_MAX_LEVEL:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLfloat)texture->getSamplerState().maxLevel;
+            break;
+          case GL_TEXTURE_MIN_LOD:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().minLod;
+            break;
+          case GL_TEXTURE_MAX_LOD:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().maxLod;
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetTexParameteriv(GLenum target, GLenum pname, GLint* params)
 {
     EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", target, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Texture *texture = context->getTargetTexture(target);
 
-        if (context)
+        if (!texture)
         {
-            gl::Texture *texture;
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            switch (target)
+        switch (pname)
+        {
+          case GL_TEXTURE_MAG_FILTER:
+            *params = texture->getSamplerState().magFilter;
+            break;
+          case GL_TEXTURE_MIN_FILTER:
+            *params = texture->getSamplerState().minFilter;
+            break;
+          case GL_TEXTURE_WRAP_S:
+            *params = texture->getSamplerState().wrapS;
+            break;
+          case GL_TEXTURE_WRAP_T:
+            *params = texture->getSamplerState().wrapT;
+            break;
+          case GL_TEXTURE_WRAP_R:
+            if (context->getClientVersion() < 3)
             {
-              case GL_TEXTURE_2D:
-                texture = context->getTexture2D();
-                break;
-              case GL_TEXTURE_CUBE_MAP:
-                texture = context->getTextureCubeMap();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
-
-            switch (pname)
+            *params = texture->getSamplerState().wrapR;
+            break;
+          case GL_TEXTURE_IMMUTABLE_FORMAT:
+            // Exposed to ES2.0 through EXT_texture_storage, no client version validation.
+            *params = texture->isImmutable() ? GL_TRUE : GL_FALSE;
+            break;
+          case GL_TEXTURE_IMMUTABLE_LEVELS:
+            if (context->getClientVersion() < 3)
             {
-              case GL_TEXTURE_MAG_FILTER:
-                *params = texture->getMagFilter();
-                break;
-              case GL_TEXTURE_MIN_FILTER:
-                *params = texture->getMinFilter();
-                break;
-              case GL_TEXTURE_WRAP_S:
-                *params = texture->getWrapS();
-                break;
-              case GL_TEXTURE_WRAP_T:
-                *params = texture->getWrapT();
-                break;
-              case GL_TEXTURE_IMMUTABLE_FORMAT_EXT:
-                *params = texture->isImmutable() ? GL_TRUE : GL_FALSE;
-                break;
-              case GL_TEXTURE_USAGE_ANGLE:
-                *params = texture->getUsage();
-                break;
-              case GL_TEXTURE_MAX_ANISOTROPY_EXT:
-                if (!context->supportsTextureFilterAnisotropy())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                *params = (GLint)texture->getMaxAnisotropy();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->immutableLevelCount();
+            break;
+          case GL_TEXTURE_USAGE_ANGLE:
+            *params = texture->getUsage();
+            break;
+          case GL_TEXTURE_MAX_ANISOTROPY_EXT:
+            if (!context->getExtensions().textureFilterAnisotropic)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLint)texture->getSamplerState().maxAnisotropy;
+            break;
+          case GL_TEXTURE_SWIZZLE_R:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().swizzleRed;
+            break;
+          case GL_TEXTURE_SWIZZLE_G:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
+            *params = texture->getSamplerState().swizzleGreen;
+            break;
+          case GL_TEXTURE_SWIZZLE_B:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().swizzleBlue;
+            break;
+          case GL_TEXTURE_SWIZZLE_A:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().swizzleAlpha;
+            break;
+          case GL_TEXTURE_BASE_LEVEL:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().baseLevel;
+            break;
+          case GL_TEXTURE_MAX_LEVEL:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = texture->getSamplerState().maxLevel;
+            break;
+          case GL_TEXTURE_MIN_LOD:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLint)texture->getSamplerState().minLod;
+            break;
+          case GL_TEXTURE_MAX_LOD:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+            *params = (GLint)texture->getSamplerState().maxLod;
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glGetnUniformfvEXT(GLuint program, GLint location, GLsizei bufSize, GLfloat* params)
@@ -3988,44 +3188,20 @@ void __stdcall glGetnUniformfvEXT(GLuint program, GLint location, GLsizei bufSiz
     EVENT("(GLuint program = %d, GLint location = %d, GLsizei bufSize = %d, GLfloat* params = 0x%0.8p)",
           program, location, bufSize, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (bufSize < 0)
+        if (!ValidateGetnUniformfvEXT(context, program, location, bufSize, params))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            if (program == 0)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        ASSERT(programBinary);
 
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject || !programObject->isLinked())
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            if (!programBinary->getUniformfv(location, &bufSize, params))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        programBinary->getUniformfv(location, params);
     }
 }
 
@@ -4033,85 +3209,42 @@ void __stdcall glGetUniformfv(GLuint program, GLint location, GLfloat* params)
 {
     EVENT("(GLuint program = %d, GLint location = %d, GLfloat* params = 0x%0.8p)", program, location, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!ValidateGetUniformfv(context, program, location, params))
         {
-            if (program == 0)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject || !programObject->isLinked())
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            return;
+        }
 
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        ASSERT(programBinary);
 
-            if (!programBinary->getUniformfv(location, NULL, params))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        programBinary->getUniformfv(location, params);
     }
 }
 
 void __stdcall glGetnUniformivEXT(GLuint program, GLint location, GLsizei bufSize, GLint* params)
 {
-    EVENT("(GLuint program = %d, GLint location = %d, GLsizei bufSize = %d, GLint* params = 0x%0.8p)", 
+    EVENT("(GLuint program = %d, GLint location = %d, GLsizei bufSize = %d, GLint* params = 0x%0.8p)",
           program, location, bufSize, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (bufSize < 0)
+        if (!ValidateGetnUniformivEXT(context, program, location, bufSize, params))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            if (program == 0)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            gl::Program *programObject = context->getProgram(program);
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        ASSERT(programBinary);
 
-            if (!programObject || !programObject->isLinked())
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            if (!programBinary->getUniformiv(location, &bufSize, params))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        programBinary->getUniformiv(location, params);
     }
 }
 
@@ -4119,83 +3252,59 @@ void __stdcall glGetUniformiv(GLuint program, GLint location, GLint* params)
 {
     EVENT("(GLuint program = %d, GLint location = %d, GLint* params = 0x%0.8p)", program, location, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!ValidateGetUniformiv(context, program, location, params))
         {
-            if (program == 0)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject || !programObject->isLinked())
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            return;
+        }
 
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        ASSERT(programBinary);
 
-            if (!programBinary->getUniformiv(location, NULL, params))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        programBinary->getUniformiv(location, params);
     }
 }
 
-int __stdcall glGetUniformLocation(GLuint program, const GLchar* name)
+GLint __stdcall glGetUniformLocation(GLuint program, const GLchar* name)
 {
     EVENT("(GLuint program = %d, const GLchar* name = 0x%0.8p)", program, name);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
         if (strstr(name, "gl_") == name)
         {
             return -1;
         }
 
-        if (context)
-        {
-            gl::Program *programObject = context->getProgram(program);
+        gl::Program *programObject = context->getProgram(program);
 
-            if (!programObject)
+        if (!programObject)
+        {
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION, -1);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE, -1);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return -1;
             }
-
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
-            if (!programObject->isLinked() || !programBinary)
+            else
             {
-                return gl::error(GL_INVALID_OPERATION, -1);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return -1;
             }
+        }
 
-            return programBinary->getUniformLocation(name);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        if (!programObject->isLinked() || !programBinary)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return -1;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, -1);
+
+        return programBinary->getUniformLocation(name);
     }
 
     return -1;
@@ -4205,55 +3314,33 @@ void __stdcall glGetVertexAttribfv(GLuint index, GLenum pname, GLfloat* params)
 {
     EVENT("(GLuint index = %d, GLenum pname = 0x%X, GLfloat* params = 0x%0.8p)", index, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            if (index >= gl::MAX_VERTEX_ATTRIBS)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            const gl::VertexAttribute &attribState = context->getVertexAttribState(index);
+        const gl::VertexAttribute &attribState = context->getState().getVertexAttribState(index);
+        if (!gl::ValidateGetVertexAttribParameters(context, pname))
+        {
+            return;
+        }
 
-            switch (pname)
+        if (pname == GL_CURRENT_VERTEX_ATTRIB)
+        {
+            const gl::VertexAttribCurrentValueData &currentValueData = context->getState().getVertexAttribCurrentValue(index);
+            for (int i = 0; i < 4; ++i)
             {
-              case GL_VERTEX_ATTRIB_ARRAY_ENABLED:
-                *params = (GLfloat)(attribState.mArrayEnabled ? GL_TRUE : GL_FALSE);
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_SIZE:
-                *params = (GLfloat)attribState.mSize;
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_STRIDE:
-                *params = (GLfloat)attribState.mStride;
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_TYPE:
-                *params = (GLfloat)attribState.mType;
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_NORMALIZED:
-                *params = (GLfloat)(attribState.mNormalized ? GL_TRUE : GL_FALSE);
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING:
-                *params = (GLfloat)attribState.mBoundBuffer.id();
-                break;
-              case GL_CURRENT_VERTEX_ATTRIB:
-                for (int i = 0; i < 4; ++i)
-                {
-                    params[i] = attribState.mCurrentValue[i];
-                }
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE:
-                *params = (GLfloat)attribState.mDivisor;
-                break;
-              default: return gl::error(GL_INVALID_ENUM);
+                params[i] = currentValueData.FloatValues[i];
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        else
+        {
+            *params = gl::QuerySingleVertexAttributeParameter<GLfloat>(attribState, pname);
+        }
     }
 }
 
@@ -4261,56 +3348,35 @@ void __stdcall glGetVertexAttribiv(GLuint index, GLenum pname, GLint* params)
 {
     EVENT("(GLuint index = %d, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", index, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            if (index >= gl::MAX_VERTEX_ATTRIBS)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            const gl::VertexAttribute &attribState = context->getVertexAttribState(index);
+        const gl::VertexAttribute &attribState = context->getState().getVertexAttribState(index);
 
-            switch (pname)
+        if (!gl::ValidateGetVertexAttribParameters(context, pname))
+        {
+            return;
+        }
+
+        if (pname == GL_CURRENT_VERTEX_ATTRIB)
+        {
+            const gl::VertexAttribCurrentValueData &currentValueData = context->getState().getVertexAttribCurrentValue(index);
+            for (int i = 0; i < 4; ++i)
             {
-              case GL_VERTEX_ATTRIB_ARRAY_ENABLED:
-                *params = (attribState.mArrayEnabled ? GL_TRUE : GL_FALSE);
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_SIZE:
-                *params = attribState.mSize;
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_STRIDE:
-                *params = attribState.mStride;
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_TYPE:
-                *params = attribState.mType;
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_NORMALIZED:
-                *params = (attribState.mNormalized ? GL_TRUE : GL_FALSE);
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING:
-                *params = attribState.mBoundBuffer.id();
-                break;
-              case GL_CURRENT_VERTEX_ATTRIB:
-                for (int i = 0; i < 4; ++i)
-                {
-                    float currentValue = attribState.mCurrentValue[i];
-                    params[i] = (GLint)(currentValue > 0.0f ? floor(currentValue + 0.5f) : ceil(currentValue - 0.5f));
-                }
-                break;
-              case GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE:
-                *params = (GLint)attribState.mDivisor;
-                break;
-              default: return gl::error(GL_INVALID_ENUM);
+                float currentValue = currentValueData.FloatValues[i];
+                params[i] = gl::iround<GLint>(currentValue);
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        else
+        {
+            *params = gl::QuerySingleVertexAttributeParameter<GLint>(attribState, pname);
+        }
     }
 }
 
@@ -4318,28 +3384,22 @@ void __stdcall glGetVertexAttribPointerv(GLuint index, GLenum pname, GLvoid** po
 {
     EVENT("(GLuint index = %d, GLenum pname = 0x%X, GLvoid** pointer = 0x%0.8p)", index, pname, pointer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            if (index >= gl::MAX_VERTEX_ATTRIBS)
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            if (pname != GL_VERTEX_ATTRIB_ARRAY_POINTER)
-            {
-                return gl::error(GL_INVALID_ENUM);
-            }
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            *pointer = const_cast<GLvoid*>(context->getVertexAttribPointer(index));
+        if (pname != GL_VERTEX_ATTRIB_ARRAY_POINTER)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        *pointer = const_cast<GLvoid*>(context->getState().getVertexAttribPointer(index));
     }
 }
 
@@ -4347,7 +3407,8 @@ void __stdcall glHint(GLenum target, GLenum mode)
 {
     EVENT("(GLenum target = 0x%X, GLenum mode = 0x%X)", target, mode);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (mode)
         {
@@ -4355,51 +3416,43 @@ void __stdcall glHint(GLenum target, GLenum mode)
           case GL_NICEST:
           case GL_DONT_CARE:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM); 
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
         switch (target)
         {
           case GL_GENERATE_MIPMAP_HINT:
-            if (context) context->setGenerateMipmapHint(mode);
+            context->getState().setGenerateMipmapHint(mode);
             break;
+
           case GL_FRAGMENT_SHADER_DERIVATIVE_HINT_OES:
-            if (context) context->setFragmentShaderDerivativeHint(mode);
+            context->getState().setFragmentShaderDerivativeHint(mode);
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 GLboolean __stdcall glIsBuffer(GLuint buffer)
 {
     EVENT("(GLuint buffer = %d)", buffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context && buffer)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Buffer *bufferObject = context->getBuffer(buffer);
 
-        if (context && buffer)
+        if (bufferObject)
         {
-            gl::Buffer *bufferObject = context->getBuffer(buffer);
-
-            if (bufferObject)
-            {
-                return GL_TRUE;
-            }
+            return GL_TRUE;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
-    }
 
     return GL_FALSE;
 }
@@ -4408,31 +3461,16 @@ GLboolean __stdcall glIsEnabled(GLenum cap)
 {
     EVENT("(GLenum cap = 0x%X)", cap);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!ValidCap(context, cap))
         {
-            switch (cap)
-            {
-              case GL_CULL_FACE:                return context->isCullFaceEnabled();
-              case GL_POLYGON_OFFSET_FILL:      return context->isPolygonOffsetFillEnabled();
-              case GL_SAMPLE_ALPHA_TO_COVERAGE: return context->isSampleAlphaToCoverageEnabled();
-              case GL_SAMPLE_COVERAGE:          return context->isSampleCoverageEnabled();
-              case GL_SCISSOR_TEST:             return context->isScissorTestEnabled();
-              case GL_STENCIL_TEST:             return context->isStencilTestEnabled();
-              case GL_DEPTH_TEST:               return context->isDepthTestEnabled();
-              case GL_BLEND:                    return context->isBlendEnabled();
-              case GL_DITHER:                   return context->isDitherEnabled();
-              default:
-                return gl::error(GL_INVALID_ENUM, false);
-            }
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return GL_FALSE;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, false);
+
+        return context->getState().getEnableFeature(cap);
     }
 
     return false;
@@ -4442,25 +3480,17 @@ GLboolean __stdcall glIsFenceNV(GLuint fence)
 {
     EVENT("(GLuint fence = %d)", fence);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::FenceNV *fenceObject = context->getFenceNV(fence);
 
-        if (context)
+        if (fenceObject == NULL)
         {
-            gl::Fence *fenceObject = context->getFence(fence);
-
-            if (fenceObject == NULL)
-            {
-                return GL_FALSE;
-            }
-
-            return fenceObject->isFence();
+            return GL_FALSE;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
+
+        return fenceObject->isFence();
     }
 
     return GL_FALSE;
@@ -4470,24 +3500,16 @@ GLboolean __stdcall glIsFramebuffer(GLuint framebuffer)
 {
     EVENT("(GLuint framebuffer = %d)", framebuffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context && framebuffer)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Framebuffer *framebufferObject = context->getFramebuffer(framebuffer);
 
-        if (context && framebuffer)
+        if (framebufferObject)
         {
-            gl::Framebuffer *framebufferObject = context->getFramebuffer(framebuffer);
-
-            if (framebufferObject)
-            {
-                return GL_TRUE;
-            }
+            return GL_TRUE;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
-    }
 
     return GL_FALSE;
 }
@@ -4496,24 +3518,16 @@ GLboolean __stdcall glIsProgram(GLuint program)
 {
     EVENT("(GLuint program = %d)", program);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context && program)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context && program)
+        if (programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (programObject)
-            {
-                return GL_TRUE;
-            }
+            return GL_TRUE;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
-    }
 
     return GL_FALSE;
 }
@@ -4522,28 +3536,10 @@ GLboolean __stdcall glIsQueryEXT(GLuint id)
 {
     EVENT("(GLuint id = %d)", id);
 
-    try
-    {
-        if (id == 0)
-        {
-            return GL_FALSE;
-        }
-
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            gl::Query *queryObject = context->getQuery(id, false, GL_NONE);
-
-            if (queryObject)
-            {
-                return GL_TRUE;
-            }
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
+        return (context->getQuery(id, false, GL_NONE) != NULL) ? GL_TRUE : GL_FALSE;
     }
 
     return GL_FALSE;
@@ -4553,24 +3549,16 @@ GLboolean __stdcall glIsRenderbuffer(GLuint renderbuffer)
 {
     EVENT("(GLuint renderbuffer = %d)", renderbuffer);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context && renderbuffer)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Renderbuffer *renderbufferObject = context->getRenderbuffer(renderbuffer);
 
-        if (context && renderbuffer)
+        if (renderbufferObject)
         {
-            gl::Renderbuffer *renderbufferObject = context->getRenderbuffer(renderbuffer);
-
-            if (renderbufferObject)
-            {
-                return GL_TRUE;
-            }
+            return GL_TRUE;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
-    }
 
     return GL_FALSE;
 }
@@ -4579,24 +3567,16 @@ GLboolean __stdcall glIsShader(GLuint shader)
 {
     EVENT("(GLuint shader = %d)", shader);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context && shader)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context && shader)
+        if (shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (shaderObject)
-            {
-                return GL_TRUE;
-            }
+            return GL_TRUE;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
-    }
 
     return GL_FALSE;
 }
@@ -4605,24 +3585,16 @@ GLboolean __stdcall glIsTexture(GLuint texture)
 {
     EVENT("(GLuint texture = %d)", texture);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context && texture)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Texture *textureObject = context->getTexture(texture);
 
-        if (context && texture)
+        if (textureObject)
         {
-            gl::Texture *textureObject = context->getTexture(texture);
-
-            if (textureObject)
-            {
-                return GL_TRUE;
-            }
+            return GL_TRUE;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, GL_FALSE);
-    }
 
     return GL_FALSE;
 }
@@ -4631,23 +3603,16 @@ void __stdcall glLineWidth(GLfloat width)
 {
     EVENT("(GLfloat width = %f)", width);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (width <= 0.0f)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setLineWidth(width);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setLineWidth(width);
     }
 }
 
@@ -4655,32 +3620,26 @@ void __stdcall glLinkProgram(GLuint program)
 {
     EVENT("(GLuint program = %d)", program);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            context->linkProgram(program);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->linkProgram(program);
     }
 }
 
@@ -4688,63 +3647,66 @@ void __stdcall glPixelStorei(GLenum pname, GLint param)
 {
     EVENT("(GLenum pname = 0x%X, GLint param = %d)", pname, param);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        switch (pname)
         {
-            switch (pname)
+          case GL_UNPACK_ALIGNMENT:
+            if (param != 1 && param != 2 && param != 4 && param != 8)
             {
-              case GL_UNPACK_ALIGNMENT:
-                if (param != 1 && param != 2 && param != 4 && param != 8)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
 
-                context->setUnpackAlignment(param);
-                break;
+            context->getState().setUnpackAlignment(param);
+            break;
 
-              case GL_PACK_ALIGNMENT:
-                if (param != 1 && param != 2 && param != 4 && param != 8)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+          case GL_PACK_ALIGNMENT:
+            if (param != 1 && param != 2 && param != 4 && param != 8)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
 
-                context->setPackAlignment(param);
-                break;
+            context->getState().setPackAlignment(param);
+            break;
 
-              case GL_PACK_REVERSE_ROW_ORDER_ANGLE:
-                context->setPackReverseRowOrder(param != 0);
-                break;
+          case GL_PACK_REVERSE_ROW_ORDER_ANGLE:
+            context->getState().setPackReverseRowOrder(param != 0);
+            break;
 
-              default:
-                return gl::error(GL_INVALID_ENUM);
+          case GL_UNPACK_IMAGE_HEIGHT:
+          case GL_UNPACK_SKIP_IMAGES:
+          case GL_UNPACK_ROW_LENGTH:
+          case GL_UNPACK_SKIP_ROWS:
+          case GL_UNPACK_SKIP_PIXELS:
+          case GL_PACK_ROW_LENGTH:
+          case GL_PACK_SKIP_ROWS:
+          case GL_PACK_SKIP_PIXELS:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
+            UNIMPLEMENTED();
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glPolygonOffset(GLfloat factor, GLfloat units)
 {
     EVENT("(GLfloat factor = %f, GLfloat units = %f)", factor, units);
 
-    try
-    {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setPolygonOffsetParams(factor, units);
-        }
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setPolygonOffsetParams(factor, units);
     }
 }
 
@@ -4756,37 +3718,28 @@ void __stdcall glReadnPixelsEXT(GLint x, GLint y, GLsizei width, GLsizei height,
           "GLenum format = 0x%X, GLenum type = 0x%X, GLsizei bufSize = 0x%d, GLvoid *data = 0x%0.8p)",
           x, y, width, height, format, type, bufSize, data);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (width < 0 || height < 0 || bufSize < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!gl::ValidateReadPixelsParameters(context, x, y, width, height,
+                                              format, type, &bufSize, data))
         {
-            GLenum currentFormat, currentType;
-    
-            // Failure in getCurrentReadFormatType indicates that no color attachment is currently bound,
-            // and attempting to read back if that's the case is an error. The error will be registered
-            // by getCurrentReadFormat.
-            if (!context->getCurrentReadFormatType(&currentFormat, &currentType))
-                return;
-
-            if (!(currentFormat == format && currentType == type) && !validReadFormatType(format, type))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            return;
+        }
 
-            context->readPixels(x, y, width, height, format, type, &bufSize, data);
+        gl::Error error = context->readPixels(x, y, width, height, format, type, &bufSize, data);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glReadPixels(GLint x, GLint y, GLsizei width, GLsizei height,
@@ -4796,50 +3749,39 @@ void __stdcall glReadPixels(GLint x, GLint y, GLsizei width, GLsizei height,
           "GLenum format = 0x%X, GLenum type = 0x%X, GLvoid* pixels = 0x%0.8p)",
           x, y, width, height, format, type,  pixels);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (width < 0 || height < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (!gl::ValidateReadPixelsParameters(context, x, y, width, height,
+                                              format, type, NULL, pixels))
         {
-            GLenum currentFormat, currentType;
-    
-            // Failure in getCurrentReadFormatType indicates that no color attachment is currently bound,
-            // and attempting to read back if that's the case is an error. The error will be registered
-            // by getCurrentReadFormat.
-            if (!context->getCurrentReadFormatType(&currentFormat, &currentType))
-                return;
-
-            if (!(currentFormat == format && currentType == type) && !validReadFormatType(format, type))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            return;
+        }
 
-            context->readPixels(x, y, width, height, format, type, NULL, pixels);
+        gl::Error error = context->readPixels(x, y, width, height, format, type, NULL, pixels);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glReleaseShaderCompiler(void)
 {
     EVENT("()");
 
-    try
-    {
-        gl::Shader::releaseCompiler();
-    }
-    catch(std::bad_alloc&)
+    gl::Context *context = gl::getNonLostContext();
+
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->releaseShaderCompiler();
     }
 }
 
@@ -4848,64 +3790,16 @@ void __stdcall glRenderbufferStorageMultisampleANGLE(GLenum target, GLsizei samp
     EVENT("(GLenum target = 0x%X, GLsizei samples = %d, GLenum internalformat = 0x%X, GLsizei width = %d, GLsizei height = %d)",
           target, samples, internalformat, width, height);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        switch (target)
-        {
-          case GL_RENDERBUFFER:
-            break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        if (!gl::IsColorRenderable(internalformat) && !gl::IsDepthRenderable(internalformat) && !gl::IsStencilRenderable(internalformat))
-        {
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        if (width < 0 || height < 0 || samples < 0)
+        if (!ValidateRenderbufferStorageParameters(context, target, samples, internalformat,
+                                                   width, height, true))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
-        {
-            if (width > context->getMaximumRenderbufferDimension() || 
-                height > context->getMaximumRenderbufferDimension() ||
-                samples > context->getMaxSupportedSamples())
-            {
-                return gl::error(GL_INVALID_VALUE);
-            }
-
-            GLuint handle = context->getRenderbufferHandle();
-            if (handle == 0)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            switch (internalformat)
-            {
-              case GL_DEPTH_COMPONENT16:
-              case GL_RGBA4:
-              case GL_RGB5_A1:
-              case GL_RGB565:
-              case GL_RGB8_OES:
-              case GL_RGBA8_OES:
-              case GL_STENCIL_INDEX8:
-              case GL_DEPTH24_STENCIL8_OES:
-              case GL_BGRA8_EXT:
-                context->setRenderbufferStorage(width, height, internalformat, samples);
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->setRenderbufferStorage(width, height, internalformat, samples);
     }
 }
 
@@ -4916,20 +3810,13 @@ void __stdcall glRenderbufferStorage(GLenum target, GLenum internalformat, GLsiz
 
 void __stdcall glSampleCoverage(GLclampf value, GLboolean invert)
 {
-    EVENT("(GLclampf value = %f, GLboolean invert = %d)", value, invert);
+    EVENT("(GLclampf value = %f, GLboolean invert = %u)", value, invert);
 
-    try
-    {
-        gl::Context* context = gl::getNonLostContext();
+    gl::Context* context = gl::getNonLostContext();
 
-        if (context)
-        {
-            context->setSampleCoverageParams(gl::clamp01(value), invert == GL_TRUE);
-        }
-    }
-    catch(std::bad_alloc&)
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setSampleCoverageParams(gl::clamp01(value), invert == GL_TRUE);
     }
 }
 
@@ -4937,30 +3824,24 @@ void __stdcall glSetFenceNV(GLuint fence, GLenum condition)
 {
     EVENT("(GLuint fence = %d, GLenum condition = 0x%X)", fence, condition);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (condition != GL_ALL_COMPLETED_NV)
         {
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::FenceNV *fenceObject = context->getFenceNV(fence);
 
-        if (context)
+        if (fenceObject == NULL)
         {
-            gl::Fence *fenceObject = context->getFence(fence);
-
-            if (fenceObject == NULL)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            fenceObject->setFence(condition);    
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        fenceObject->setFence(condition);
     }
 }
 
@@ -4968,23 +3849,16 @@ void __stdcall glScissor(GLint x, GLint y, GLsizei width, GLsizei height)
 {
     EVENT("(GLint x = %d, GLint y = %d, GLsizei width = %d, GLsizei height = %d)", x, y, width, height);
 
-    try
+    gl::Context* context = gl::getNonLostContext();
+    if (context)
     {
         if (width < 0 || height < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context* context = gl::getNonLostContext();
-
-        if (context)
-        {
-            context->setScissorParams(x, y, width, height);
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        context->getState().setScissorParams(x, y, width, height);
     }
 }
 
@@ -4994,53 +3868,52 @@ void __stdcall glShaderBinary(GLsizei n, const GLuint* shaders, GLenum binaryfor
           "const GLvoid* binary = 0x%0.8p, GLsizei length = %d)",
           n, shaders, binaryformat, binary, length);
 
-    try
+    gl::Context* context = gl::getNonLostContext();
+    if (context)
     {
+        const std::vector<GLenum> &shaderBinaryFormats = context->getCaps().shaderBinaryFormats;
+        if (std::find(shaderBinaryFormats.begin(), shaderBinaryFormats.end(), binaryformat) == shaderBinaryFormats.end())
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
         // No binary shader formats are supported.
-        return gl::error(GL_INVALID_ENUM);
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+        UNIMPLEMENTED();
     }
 }
 
-void __stdcall glShaderSource(GLuint shader, GLsizei count, const GLchar** string, const GLint* length)
+void __stdcall glShaderSource(GLuint shader, GLsizei count, const GLchar* const* string, const GLint* length)
 {
     EVENT("(GLuint shader = %d, GLsizei count = %d, const GLchar** string = 0x%0.8p, const GLint* length = 0x%0.8p)",
           shader, count, string, length);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         if (count < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Shader *shaderObject = context->getShader(shader);
 
-        if (context)
+        if (!shaderObject)
         {
-            gl::Shader *shaderObject = context->getShader(shader);
-
-            if (!shaderObject)
+            if (context->getProgram(shader))
             {
-                if (context->getProgram(shader))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-
-            shaderObject->setSource(count, string, length);
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        shaderObject->setSource(count, string, length);
     }
 }
 
@@ -5053,7 +3926,8 @@ void __stdcall glStencilFuncSeparate(GLenum face, GLenum func, GLint ref, GLuint
 {
     EVENT("(GLenum face = 0x%X, GLenum func = 0x%X, GLint ref = %d, GLuint mask = %d)", face, func, ref, mask);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (face)
         {
@@ -5061,8 +3935,10 @@ void __stdcall glStencilFuncSeparate(GLenum face, GLenum func, GLint ref, GLuint
           case GL_BACK:
           case GL_FRONT_AND_BACK:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (func)
@@ -5076,29 +3952,22 @@ void __stdcall glStencilFuncSeparate(GLenum face, GLenum func, GLint ref, GLuint
           case GL_GREATER:
           case GL_NOTEQUAL:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (face == GL_FRONT || face == GL_FRONT_AND_BACK)
         {
-            if (face == GL_FRONT || face == GL_FRONT_AND_BACK)
-            {
-                context->setStencilParams(func, ref, mask);
-            }
+            context->getState().setStencilParams(func, ref, mask);
+        }
 
-            if (face == GL_BACK || face == GL_FRONT_AND_BACK)
-            {
-                context->setStencilBackParams(func, ref, mask);
-            }
+        if (face == GL_BACK || face == GL_FRONT_AND_BACK)
+        {
+            context->getState().setStencilBackParams(func, ref, mask);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glStencilMask(GLuint mask)
@@ -5110,7 +3979,8 @@ void __stdcall glStencilMaskSeparate(GLenum face, GLuint mask)
 {
     EVENT("(GLenum face = 0x%X, GLuint mask = %d)", face, mask);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (face)
         {
@@ -5118,29 +3988,22 @@ void __stdcall glStencilMaskSeparate(GLenum face, GLuint mask)
           case GL_BACK:
           case GL_FRONT_AND_BACK:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (face == GL_FRONT || face == GL_FRONT_AND_BACK)
         {
-            if (face == GL_FRONT || face == GL_FRONT_AND_BACK)
-            {
-                context->setStencilWritemask(mask);
-            }
+            context->getState().setStencilWritemask(mask);
+        }
 
-            if (face == GL_BACK || face == GL_FRONT_AND_BACK)
-            {
-                context->setStencilBackWritemask(mask);
-            }
+        if (face == GL_BACK || face == GL_FRONT_AND_BACK)
+        {
+            context->getState().setStencilBackWritemask(mask);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glStencilOp(GLenum fail, GLenum zfail, GLenum zpass)
@@ -5153,7 +4016,8 @@ void __stdcall glStencilOpSeparate(GLenum face, GLenum fail, GLenum zfail, GLenu
     EVENT("(GLenum face = 0x%X, GLenum fail = 0x%X, GLenum zfail = 0x%X, GLenum zpas = 0x%Xs)",
           face, fail, zfail, zpass);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
         switch (face)
         {
@@ -5161,8 +4025,10 @@ void __stdcall glStencilOpSeparate(GLenum face, GLenum fail, GLenum zfail, GLenu
           case GL_BACK:
           case GL_FRONT_AND_BACK:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (fail)
@@ -5176,8 +4042,10 @@ void __stdcall glStencilOpSeparate(GLenum face, GLenum fail, GLenum zfail, GLenu
           case GL_INCR_WRAP:
           case GL_DECR_WRAP:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (zfail)
@@ -5191,8 +4059,10 @@ void __stdcall glStencilOpSeparate(GLenum face, GLenum fail, GLenum zfail, GLenu
           case GL_INCR_WRAP:
           case GL_DECR_WRAP:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
         switch (zpass)
@@ -5206,56 +4076,48 @@ void __stdcall glStencilOpSeparate(GLenum face, GLenum fail, GLenum zfail, GLenu
           case GL_INCR_WRAP:
           case GL_DECR_WRAP:
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (face == GL_FRONT || face == GL_FRONT_AND_BACK)
         {
-            if (face == GL_FRONT || face == GL_FRONT_AND_BACK)
-            {
-                context->setStencilOperations(fail, zfail, zpass);
-            }
+            context->getState().setStencilOperations(fail, zfail, zpass);
+        }
 
-            if (face == GL_BACK || face == GL_FRONT_AND_BACK)
-            {
-                context->setStencilBackOperations(fail, zfail, zpass);
-            }
+        if (face == GL_BACK || face == GL_FRONT_AND_BACK)
+        {
+            context->getState().setStencilBackOperations(fail, zfail, zpass);
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 GLboolean __stdcall glTestFenceNV(GLuint fence)
 {
     EVENT("(GLuint fence = %d)", fence);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::FenceNV *fenceObject = context->getFenceNV(fence);
 
-        if (context)
+        if (fenceObject == NULL)
         {
-            gl::Fence *fenceObject = context->getFence(fence);
-
-            if (fenceObject == NULL)
-            {
-                return gl::error(GL_INVALID_OPERATION, GL_TRUE);
-            }
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_TRUE;
+        }
 
-            return fenceObject->testFence();
+        if (fenceObject->isFence() != GL_TRUE)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_TRUE;
         }
+
+        return fenceObject->testFence();
     }
-    catch(std::bad_alloc&)
-    {
-        gl::error(GL_OUT_OF_MEMORY);
-    }
-    
+
     return GL_TRUE;
 }
 
@@ -5263,712 +4125,1813 @@ void __stdcall glTexImage2D(GLenum target, GLint level, GLint internalformat, GL
                             GLint border, GLenum format, GLenum type, const GLvoid* pixels)
 {
     EVENT("(GLenum target = 0x%X, GLint level = %d, GLint internalformat = %d, GLsizei width = %d, GLsizei height = %d, "
-          "GLint border = %d, GLenum format = 0x%X, GLenum type = 0x%X, const GLvoid* pixels =  0x%0.8p)",
+          "GLint border = %d, GLenum format = 0x%X, GLenum type = 0x%X, const GLvoid* pixels = 0x%0.8p)",
           target, level, internalformat, width, height, border, format, type, pixels);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (!validImageSize(level, width, height))
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2TexImageParameters(context, target, level, internalformat, false, false,
+                                           0, 0, width, height, border, format, type, pixels))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (internalformat != GLint(format))
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3TexImageParameters(context, target, level, internalformat, false, false,
+                                           0, 0, 0, width, height, 1, border, format, type, pixels))
         {
-            return gl::error(GL_INVALID_OPERATION);
+            return;
         }
 
-        // validate <type> by itself (used as secondary key below)
-        switch (type)
+        switch (target)
         {
-          case GL_UNSIGNED_BYTE:
-          case GL_UNSIGNED_SHORT_5_6_5:
-          case GL_UNSIGNED_SHORT_4_4_4_4:
-          case GL_UNSIGNED_SHORT_5_5_5_1:
-          case GL_UNSIGNED_SHORT:
-          case GL_UNSIGNED_INT:
-          case GL_UNSIGNED_INT_24_8_OES:
-          case GL_HALF_FLOAT_OES:
-          case GL_FLOAT:
+          case GL_TEXTURE_2D:
+            {
+                gl::Texture2D *texture = context->getTexture2D();
+                texture->setImage(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
+            }
             break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
-        }
-
-        // validate <format> + <type> combinations
-        // - invalid <format> -> sets INVALID_ENUM
-        // - invalid <format>+<type> combination -> sets INVALID_OPERATION
-        switch (format)
-        {
-          case GL_ALPHA:
-          case GL_LUMINANCE:
-          case GL_LUMINANCE_ALPHA:
-            switch (type)
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
             {
-              case GL_UNSIGNED_BYTE:
-              case GL_FLOAT:
-              case GL_HALF_FLOAT_OES:
-                break;
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->setImagePosX(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
             break;
-          case GL_RGB:
-            switch (type)
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
             {
-              case GL_UNSIGNED_BYTE:
-              case GL_UNSIGNED_SHORT_5_6_5:
-              case GL_FLOAT:
-              case GL_HALF_FLOAT_OES:
-                break;
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->setImageNegX(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
             break;
-          case GL_RGBA:
-            switch (type)
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
             {
-              case GL_UNSIGNED_BYTE:
-              case GL_UNSIGNED_SHORT_4_4_4_4:
-              case GL_UNSIGNED_SHORT_5_5_5_1:
-              case GL_FLOAT:
-              case GL_HALF_FLOAT_OES:
-                break;
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->setImagePosY(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
             break;
-          case GL_BGRA_EXT:
-            switch (type)
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
             {
-              case GL_UNSIGNED_BYTE:
-                break;
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->setImageNegY(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
             break;
-          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:  // error cases for compressed textures are handled below
-          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-            break; 
-          case GL_DEPTH_COMPONENT:
-            switch (type)
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
             {
-              case GL_UNSIGNED_SHORT:
-              case GL_UNSIGNED_INT:
-                break;
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->setImagePosZ(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
             break;
-          case GL_DEPTH_STENCIL_OES:
-            switch (type)
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
             {
-              case GL_UNSIGNED_INT_24_8_OES:
-                break;
-              default:
-                return gl::error(GL_INVALID_OPERATION);
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->setImageNegZ(level, width, height, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
             break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
+          default: UNREACHABLE();
         }
+    }
+}
 
-        if (border != 0)
+void __stdcall glTexParameterf(GLenum target, GLenum pname, GLfloat param)
+{
+    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint param = %f)", target, pname, param);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateTexParamParameters(context, pname, static_cast<GLint>(param)))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Texture *texture = context->getTargetTexture(target);
 
-        if (context)
+        if (!texture)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_TEXTURE_WRAP_S:               texture->getSamplerState().wrapS = gl::uiround<GLenum>(param);        break;
+          case GL_TEXTURE_WRAP_T:               texture->getSamplerState().wrapT = gl::uiround<GLenum>(param);        break;
+          case GL_TEXTURE_WRAP_R:               texture->getSamplerState().wrapR = gl::uiround<GLenum>(param);        break;
+          case GL_TEXTURE_MIN_FILTER:           texture->getSamplerState().minFilter = gl::uiround<GLenum>(param);    break;
+          case GL_TEXTURE_MAG_FILTER:           texture->getSamplerState().magFilter = gl::uiround<GLenum>(param);    break;
+          case GL_TEXTURE_USAGE_ANGLE:          texture->setUsage(gl::uiround<GLenum>(param));                        break;
+          case GL_TEXTURE_MAX_ANISOTROPY_EXT:   texture->getSamplerState().maxAnisotropy = std::min(param, context->getExtensions().maxTextureAnisotropy); break;
+          case GL_TEXTURE_COMPARE_MODE:         texture->getSamplerState().compareMode = gl::uiround<GLenum>(param);  break;
+          case GL_TEXTURE_COMPARE_FUNC:         texture->getSamplerState().compareFunc = gl::uiround<GLenum>(param);  break;
+          case GL_TEXTURE_SWIZZLE_R:            texture->getSamplerState().swizzleRed = gl::uiround<GLenum>(param);   break;
+          case GL_TEXTURE_SWIZZLE_G:            texture->getSamplerState().swizzleGreen = gl::uiround<GLenum>(param); break;
+          case GL_TEXTURE_SWIZZLE_B:            texture->getSamplerState().swizzleBlue = gl::uiround<GLenum>(param);  break;
+          case GL_TEXTURE_SWIZZLE_A:            texture->getSamplerState().swizzleAlpha = gl::uiround<GLenum>(param); break;
+          case GL_TEXTURE_BASE_LEVEL:           texture->getSamplerState().baseLevel = gl::iround<GLint>(param);      break;
+          case GL_TEXTURE_MAX_LEVEL:            texture->getSamplerState().maxLevel = gl::iround<GLint>(param);       break;
+          case GL_TEXTURE_MIN_LOD:              texture->getSamplerState().minLod = param;                            break;
+          case GL_TEXTURE_MAX_LOD:              texture->getSamplerState().maxLod = param;                            break;
+          default: UNREACHABLE(); break;
+        }
+    }
+}
+
+void __stdcall glTexParameterfv(GLenum target, GLenum pname, const GLfloat* params)
+{
+    glTexParameterf(target, pname, (GLfloat)*params);
+}
+
+void __stdcall glTexParameteri(GLenum target, GLenum pname, GLint param)
+{
+    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint param = %d)", target, pname, param);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateTexParamParameters(context, pname, param))
         {
-            if (level > context->getMaximumTextureLevel())
+            return;
+        }
+
+        gl::Texture *texture = context->getTargetTexture(target);
+
+        if (!texture)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_TEXTURE_WRAP_S:               texture->getSamplerState().wrapS = (GLenum)param;        break;
+          case GL_TEXTURE_WRAP_T:               texture->getSamplerState().wrapT = (GLenum)param;        break;
+          case GL_TEXTURE_WRAP_R:               texture->getSamplerState().wrapR = (GLenum)param;        break;
+          case GL_TEXTURE_MIN_FILTER:           texture->getSamplerState().minFilter = (GLenum)param;    break;
+          case GL_TEXTURE_MAG_FILTER:           texture->getSamplerState().magFilter = (GLenum)param;    break;
+          case GL_TEXTURE_USAGE_ANGLE:          texture->setUsage((GLenum)param);                        break;
+          case GL_TEXTURE_MAX_ANISOTROPY_EXT:   texture->getSamplerState().maxAnisotropy = std::min((float)param, context->getExtensions().maxTextureAnisotropy); break;
+          case GL_TEXTURE_COMPARE_MODE:         texture->getSamplerState().compareMode = (GLenum)param;  break;
+          case GL_TEXTURE_COMPARE_FUNC:         texture->getSamplerState().compareFunc = (GLenum)param;  break;
+          case GL_TEXTURE_SWIZZLE_R:            texture->getSamplerState().swizzleRed = (GLenum)param;   break;
+          case GL_TEXTURE_SWIZZLE_G:            texture->getSamplerState().swizzleGreen = (GLenum)param; break;
+          case GL_TEXTURE_SWIZZLE_B:            texture->getSamplerState().swizzleBlue = (GLenum)param;  break;
+          case GL_TEXTURE_SWIZZLE_A:            texture->getSamplerState().swizzleAlpha = (GLenum)param; break;
+          case GL_TEXTURE_BASE_LEVEL:           texture->getSamplerState().baseLevel = param;            break;
+          case GL_TEXTURE_MAX_LEVEL:            texture->getSamplerState().maxLevel = param;             break;
+          case GL_TEXTURE_MIN_LOD:              texture->getSamplerState().minLod = (GLfloat)param;      break;
+          case GL_TEXTURE_MAX_LOD:              texture->getSamplerState().maxLod = (GLfloat)param;      break;
+          default: UNREACHABLE(); break;
+        }
+    }
+}
+
+void __stdcall glTexParameteriv(GLenum target, GLenum pname, const GLint* params)
+{
+    glTexParameteri(target, pname, *params);
+}
+
+void __stdcall glTexStorage2DEXT(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height)
+{
+    EVENT("(GLenum target = 0x%X, GLsizei levels = %d, GLenum internalformat = 0x%X, GLsizei width = %d, GLsizei height = %d)",
+           target, levels, internalformat, width, height);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!context->getExtensions().textureStorage)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2TexStorageParameters(context, target, levels, internalformat, width, height))
+        {
+            return;
+        }
+
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3TexStorageParameters(context, target, levels, internalformat, width, height, 1))
+        {
+            return;
+        }
+
+        switch (target)
+        {
+          case GL_TEXTURE_2D:
             {
-                return gl::error(GL_INVALID_VALUE);
+                gl::Texture2D *texture2d = context->getTexture2D();
+                texture2d->storage(levels, internalformat, width, height);
             }
+            break;
 
-            switch (target)
+          case GL_TEXTURE_CUBE_MAP:
             {
-              case GL_TEXTURE_2D:
-                if (width > (context->getMaximumTextureDimension() >> level) ||
-                    height > (context->getMaximumTextureDimension() >> level))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-              case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-              case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-                if (width != height)
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                gl::TextureCubeMap *textureCube = context->getTextureCubeMap();
+                textureCube->storage(levels, internalformat, width);
+            }
+            break;
 
-                if (width > (context->getMaximumCubeTextureDimension() >> level) ||
-                    height > (context->getMaximumCubeTextureDimension() >> level))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+    }
+}
+
+void __stdcall glTexSubImage2D(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
+                               GLenum format, GLenum type, const GLvoid* pixels)
+{
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLint xoffset = %d, GLint yoffset = %d, "
+          "GLsizei width = %d, GLsizei height = %d, GLenum format = 0x%X, GLenum type = 0x%X, "
+          "const GLvoid* pixels = 0x%0.8p)",
+           target, level, xoffset, yoffset, width, height, format, type, pixels);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3 &&
+            !ValidateES2TexImageParameters(context, target, level, GL_NONE, false, true,
+                                           xoffset, yoffset, width, height, 0, format, type, pixels))
+        {
+            return;
+        }
+
+        if (context->getClientVersion() >= 3 &&
+            !ValidateES3TexImageParameters(context, target, level, GL_NONE, false, true,
+                                           xoffset, yoffset, 0, width, height, 1, 0, format, type, pixels))
+        {
+            return;
+        }
+
+        // Zero sized uploads are valid but no-ops
+        if (width == 0 || height == 0)
+        {
+            return;
+        }
+
+        switch (target)
+        {
+          case GL_TEXTURE_2D:
+            {
+                gl::Texture2D *texture = context->getTexture2D();
+                texture->subImage(level, xoffset, yoffset, width, height, format, type, context->getState().getUnpackState(), pixels);
             }
+            break;
 
-            switch (format) {
-              case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-                if (context->supportsDXT1Textures())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-                if (context->supportsDXT3Textures())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-                if (context->supportsDXT5Textures())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_DEPTH_COMPONENT:
-              case GL_DEPTH_STENCIL_OES:
-                if (!context->supportsDepthTextures())
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                if (target != GL_TEXTURE_2D)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                // OES_depth_texture supports loading depth data and multiple levels,
-                // but ANGLE_depth_texture does not
-                if (pixels != NULL || level != 0)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              default:
-                break;
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+            {
+                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                texture->subImage(target, level, xoffset, yoffset, width, height, format, type, context->getState().getUnpackState(), pixels);
             }
+            break;
+
+          default:
+            UNREACHABLE();
+        }
+    }
+}
+
+void __stdcall glUniform1f(GLint location, GLfloat x)
+{
+    glUniform1fv(location, 1, &x);
+}
+
+void __stdcall glUniform1fv(GLint location, GLsizei count, const GLfloat* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_FLOAT, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform1fv(location, count, v);
+    }
+}
+
+void __stdcall glUniform1i(GLint location, GLint x)
+{
+    glUniform1iv(location, 1, &x);
+}
+
+void __stdcall glUniform1iv(GLint location, GLsizei count, const GLint* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_INT, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform1iv(location, count, v);
+    }
+}
+
+void __stdcall glUniform2f(GLint location, GLfloat x, GLfloat y)
+{
+    GLfloat xy[2] = {x, y};
+
+    glUniform2fv(location, 1, xy);
+}
+
+void __stdcall glUniform2fv(GLint location, GLsizei count, const GLfloat* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_FLOAT_VEC2, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform2fv(location, count, v);
+    }
+}
+
+void __stdcall glUniform2i(GLint location, GLint x, GLint y)
+{
+    GLint xy[2] = {x, y};
+
+    glUniform2iv(location, 1, xy);
+}
+
+void __stdcall glUniform2iv(GLint location, GLsizei count, const GLint* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_INT_VEC2, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform2iv(location, count, v);
+    }
+}
+
+void __stdcall glUniform3f(GLint location, GLfloat x, GLfloat y, GLfloat z)
+{
+    GLfloat xyz[3] = {x, y, z};
+
+    glUniform3fv(location, 1, xyz);
+}
+
+void __stdcall glUniform3fv(GLint location, GLsizei count, const GLfloat* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_FLOAT_VEC3, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform3fv(location, count, v);
+    }
+}
+
+void __stdcall glUniform3i(GLint location, GLint x, GLint y, GLint z)
+{
+    GLint xyz[3] = {x, y, z};
+
+    glUniform3iv(location, 1, xyz);
+}
+
+void __stdcall glUniform3iv(GLint location, GLsizei count, const GLint* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_INT_VEC3, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform3iv(location, count, v);
+    }
+}
+
+void __stdcall glUniform4f(GLint location, GLfloat x, GLfloat y, GLfloat z, GLfloat w)
+{
+    GLfloat xyzw[4] = {x, y, z, w};
+
+    glUniform4fv(location, 1, xyzw);
+}
+
+void __stdcall glUniform4fv(GLint location, GLsizei count, const GLfloat* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_FLOAT_VEC4, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform4fv(location, count, v);
+    }
+}
+
+void __stdcall glUniform4i(GLint location, GLint x, GLint y, GLint z, GLint w)
+{
+    GLint xyzw[4] = {x, y, z, w};
 
-            if (type == GL_FLOAT)
+    glUniform4iv(location, 1, xyzw);
+}
+
+void __stdcall glUniform4iv(GLint location, GLsizei count, const GLint* v)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_INT_VEC4, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform4iv(location, count, v);
+    }
+}
+
+void __stdcall glUniformMatrix2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT2, location, count, transpose))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix2fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUniformMatrix3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT3, location, count, transpose))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix3fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUniformMatrix4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT4, location, count, transpose))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix4fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUseProgram(GLuint program)
+{
+    EVENT("(GLuint program = %d)", program);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        gl::Program *programObject = context->getProgram(program);
+
+        if (!programObject && program != 0)
+        {
+            if (context->getShader(program))
             {
-                if (!context->supportsFloat32Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-            else if (type == GL_HALF_FLOAT_OES)
+            else
             {
-                if (!context->supportsFloat16Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
 
-            if (target == GL_TEXTURE_2D)
-            {
-                gl::Texture2D *texture = context->getTexture2D();
+        if (program != 0 && !programObject->isLinked())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-                if (!texture)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+        context->useProgram(program);
+    }
+}
 
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+void __stdcall glValidateProgram(GLuint program)
+{
+    EVENT("(GLuint program = %d)", program);
 
-                texture->setImage(level, width, height, format, type, context->getUnpackAlignment(), pixels);
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        gl::Program *programObject = context->getProgram(program);
+
+        if (!programObject)
+        {
+            if (context->getShader(program))
+            {
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
             else
             {
-                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+        }
 
-                if (!texture)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+        programObject->validate(context->getCaps());
+    }
+}
 
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+void __stdcall glVertexAttrib1f(GLuint index, GLfloat x)
+{
+    EVENT("(GLuint index = %d, GLfloat x = %f)", index, x);
 
-                switch (target)
-                {
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-                    texture->setImagePosX(level, width, height, format, type, context->getUnpackAlignment(), pixels);
-                    break;
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-                    texture->setImageNegX(level, width, height, format, type, context->getUnpackAlignment(), pixels);
-                    break;
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-                    texture->setImagePosY(level, width, height, format, type, context->getUnpackAlignment(), pixels);
-                    break;
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-                    texture->setImageNegY(level, width, height, format, type, context->getUnpackAlignment(), pixels);
-                    break;
-                  case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-                    texture->setImagePosZ(level, width, height, format, type, context->getUnpackAlignment(), pixels);
-                    break;
-                  case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-                    texture->setImageNegZ(level, width, height, format, type, context->getUnpackAlignment(), pixels);
-                    break;
-                  default: UNREACHABLE();
-                }
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { x, 0, 0, 1 };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib1fv(GLuint index, const GLfloat* values)
+{
+    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { values[0], 0, 0, 1 };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib2f(GLuint index, GLfloat x, GLfloat y)
+{
+    EVENT("(GLuint index = %d, GLfloat x = %f, GLfloat y = %f)", index, x, y);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { x, y, 0, 1 };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib2fv(GLuint index, const GLfloat* values)
+{
+    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { values[0], values[1], 0, 1 };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib3f(GLuint index, GLfloat x, GLfloat y, GLfloat z)
+{
+    EVENT("(GLuint index = %d, GLfloat x = %f, GLfloat y = %f, GLfloat z = %f)", index, x, y, z);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { x, y, z, 1 };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib3fv(GLuint index, const GLfloat* values)
+{
+    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { values[0], values[1], values[2], 1 };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib4f(GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w)
+{
+    EVENT("(GLuint index = %d, GLfloat x = %f, GLfloat y = %f, GLfloat z = %f, GLfloat w = %f)", index, x, y, z, w);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        GLfloat vals[4] = { x, y, z, w };
+        context->getState().setVertexAttribf(index, vals);
+    }
+}
+
+void __stdcall glVertexAttrib4fv(GLuint index, const GLfloat* values)
+{
+    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        context->getState().setVertexAttribf(index, values);
+    }
+}
+
+void __stdcall glVertexAttribDivisorANGLE(GLuint index, GLuint divisor)
+{
+    EVENT("(GLuint index = %d, GLuint divisor = %d)", index, divisor);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        context->setVertexAttribDivisor(index, divisor);
+    }
+}
+
+void __stdcall glVertexAttribPointer(GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid* ptr)
+{
+    EVENT("(GLuint index = %d, GLint size = %d, GLenum type = 0x%X, "
+          "GLboolean normalized = %u, GLsizei stride = %d, const GLvoid* ptr = 0x%0.8p)",
+          index, size, type, normalized, stride, ptr);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if (size < 1 || size > 4)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        switch (type)
+        {
+          case GL_BYTE:
+          case GL_UNSIGNED_BYTE:
+          case GL_SHORT:
+          case GL_UNSIGNED_SHORT:
+          case GL_FIXED:
+          case GL_FLOAT:
+            break;
+
+          case GL_HALF_FLOAT:
+          case GL_INT:
+          case GL_UNSIGNED_INT:
+          case GL_INT_2_10_10_10_REV:
+          case GL_UNSIGNED_INT_2_10_10_10_REV:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        if (stride < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
+
+        if ((type == GL_INT_2_10_10_10_REV || type == GL_UNSIGNED_INT_2_10_10_10_REV) && size != 4)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // [OpenGL ES 3.0.2] Section 2.8 page 24:
+        // An INVALID_OPERATION error is generated when a non-zero vertex array object
+        // is bound, zero is bound to the ARRAY_BUFFER buffer object binding point,
+        // and the pointer argument is not NULL.
+        if (context->getState().getVertexArray()->id() != 0 && context->getState().getArrayBufferId() == 0 && ptr != NULL)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        context->getState().setVertexAttribState(index, context->getState().getTargetBuffer(GL_ARRAY_BUFFER), size, type,
+                                                 normalized == GL_TRUE, false, stride, ptr);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glViewport(GLint x, GLint y, GLsizei width, GLsizei height)
+{
+    EVENT("(GLint x = %d, GLint y = %d, GLsizei width = %d, GLsizei height = %d)", x, y, width, height);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (width < 0 || height < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        context->getState().setViewportParams(x, y, width, height);
     }
 }
 
-void __stdcall glTexParameterf(GLenum target, GLenum pname, GLfloat param)
+// OpenGL ES 3.0 functions
+
+void __stdcall glReadBuffer(GLenum mode)
 {
-    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint param = %f)", target, pname, param);
+    EVENT("(GLenum mode = 0x%X)", mode);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-        if (context)
+        // glReadBuffer
+        UNIMPLEMENTED();
+    }
+}
+
+void __stdcall glDrawRangeElements(GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid* indices)
+{
+    EVENT("(GLenum mode = 0x%X, GLuint start = %u, GLuint end = %u, GLsizei count = %d, GLenum type = 0x%X, "
+          "const GLvoid* indices = 0x%0.8p)", mode, start, end, count, type, indices);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // glDrawRangeElements
+        UNIMPLEMENTED();
+    }
+}
+
+void __stdcall glTexImage3D(GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid* pixels)
+{
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLint internalformat = %d, GLsizei width = %d, "
+          "GLsizei height = %d, GLsizei depth = %d, GLint border = %d, GLenum format = 0x%X, "
+          "GLenum type = 0x%X, const GLvoid* pixels = 0x%0.8p)",
+          target, level, internalformat, width, height, depth, border, format, type, pixels);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // validateES3TexImageFormat sets the error code if there is an error
+        if (!ValidateES3TexImageParameters(context, target, level, internalformat, false, false,
+                                           0, 0, 0, width, height, depth, border, format, type, pixels))
         {
-            gl::Texture *texture;
+            return;
+        }
 
-            switch (target)
+        switch(target)
+        {
+          case GL_TEXTURE_3D:
             {
-              case GL_TEXTURE_2D:
-                texture = context->getTexture2D();
-                break;
-              case GL_TEXTURE_CUBE_MAP:
-                texture = context->getTextureCubeMap();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                gl::Texture3D *texture = context->getTexture3D();
+                texture->setImage(level, width, height, depth, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
+            break;
 
-            switch (pname)
+          case GL_TEXTURE_2D_ARRAY:
             {
-              case GL_TEXTURE_WRAP_S:
-                if (!texture->setWrapS((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_WRAP_T:
-                if (!texture->setWrapT((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_MIN_FILTER:
-                if (!texture->setMinFilter((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_MAG_FILTER:
-                if (!texture->setMagFilter((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_USAGE_ANGLE:
-                if (!texture->setUsage((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_MAX_ANISOTROPY_EXT:
-                if (!context->supportsTextureFilterAnisotropy())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                if (!texture->setMaxAnisotropy((float)param, context->getTextureMaxAnisotropy()))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                gl::Texture2DArray *texture = context->getTexture2DArray();
+                texture->setImage(level, width, height, depth, internalformat, format, type, context->getState().getUnpackState(), pixels);
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glTexSubImage3D(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid* pixels)
+{
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLint xoffset = %d, GLint yoffset = %d, "
+          "GLint zoffset = %d, GLsizei width = %d, GLsizei height = %d, GLsizei depth = %d, "
+          "GLenum format = 0x%X, GLenum type = 0x%X, const GLvoid* pixels = 0x%0.8p)",
+          target, level, xoffset, yoffset, zoffset, width, height, depth, format, type, pixels);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // validateES3TexImageFormat sets the error code if there is an error
+        if (!ValidateES3TexImageParameters(context, target, level, GL_NONE, false, true,
+                                           xoffset, yoffset, zoffset, width, height, depth, 0,
+                                           format, type, pixels))
+        {
+            return;
+        }
+
+        // Zero sized uploads are valid but no-ops
+        if (width == 0 || height == 0 || depth == 0)
+        {
+            return;
+        }
+
+        switch(target)
+        {
+          case GL_TEXTURE_3D:
+            {
+                gl::Texture3D *texture = context->getTexture3D();
+                texture->subImage(level, xoffset, yoffset, zoffset, width, height, depth, format, type, context->getState().getUnpackState(), pixels);
+            }
+            break;
+
+          case GL_TEXTURE_2D_ARRAY:
+            {
+                gl::Texture2DArray *texture = context->getTexture2DArray();
+                texture->subImage(level, xoffset, yoffset, zoffset, width, height, depth, format, type, context->getState().getUnpackState(), pixels);
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
     }
 }
 
-void __stdcall glTexParameterfv(GLenum target, GLenum pname, const GLfloat* params)
+void __stdcall glCopyTexSubImage3D(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height)
 {
-    glTexParameterf(target, pname, (GLfloat)*params);
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLint xoffset = %d, GLint yoffset = %d, "
+          "GLint zoffset = %d, GLint x = %d, GLint y = %d, GLsizei width = %d, GLsizei height = %d)",
+          target, level, xoffset, yoffset, zoffset, x, y, width, height);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateES3CopyTexImageParameters(context, target, level, GL_NONE, true, xoffset, yoffset, zoffset,
+                                               x, y, width, height, 0))
+        {
+            return;
+        }
+
+        gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
+        gl::Texture *texture = NULL;
+        switch (target)
+        {
+          case GL_TEXTURE_3D:
+            texture = context->getTexture3D();
+            break;
+
+          case GL_TEXTURE_2D_ARRAY:
+            texture = context->getTexture2DArray();
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        texture->copySubImage(target, level, xoffset, yoffset, zoffset, x, y, width, height, framebuffer);
+    }
 }
 
-void __stdcall glTexParameteri(GLenum target, GLenum pname, GLint param)
+void __stdcall glCompressedTexImage3D(GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid* data)
 {
-    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint param = %d)", target, pname, param);
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLenum internalformat = 0x%X, GLsizei width = %d, "
+          "GLsizei height = %d, GLsizei depth = %d, GLint border = %d, GLsizei imageSize = %d, "
+          "const GLvoid* data = 0x%0.8p)",
+          target, level, internalformat, width, height, depth, border, imageSize, data);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-        if (context)
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+        if (imageSize < 0 || static_cast<GLuint>(imageSize) != formatInfo.computeBlockSize(GL_UNSIGNED_BYTE, width, height))
         {
-            gl::Texture *texture;
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            switch (target)
+        // validateES3TexImageFormat sets the error code if there is an error
+        if (!ValidateES3TexImageParameters(context, target, level, internalformat, true, false,
+                                           0, 0, 0, width, height, depth, border, GL_NONE, GL_NONE, data))
+        {
+            return;
+        }
+
+        switch(target)
+        {
+          case GL_TEXTURE_3D:
             {
-              case GL_TEXTURE_2D:
-                texture = context->getTexture2D();
-                break;
-              case GL_TEXTURE_CUBE_MAP:
-                texture = context->getTextureCubeMap();
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                gl::Texture3D *texture = context->getTexture3D();
+                texture->setCompressedImage(level, internalformat, width, height, depth, imageSize, data);
             }
+            break;
 
-            switch (pname)
+          case GL_TEXTURE_2D_ARRAY:
             {
-              case GL_TEXTURE_WRAP_S:
-                if (!texture->setWrapS((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_WRAP_T:
-                if (!texture->setWrapT((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_MIN_FILTER:
-                if (!texture->setMinFilter((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_MAG_FILTER:
-                if (!texture->setMagFilter((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_USAGE_ANGLE:
-                if (!texture->setUsage((GLenum)param))
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_TEXTURE_MAX_ANISOTROPY_EXT:
-                if (!context->supportsTextureFilterAnisotropy())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                if (!texture->setMaxAnisotropy((float)param, context->getTextureMaxAnisotropy()))
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
+                gl::Texture2DArray *texture = context->getTexture2DArray();
+                texture->setCompressedImage(level, internalformat, width, height, depth, imageSize, data);
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glCompressedTexSubImage3D(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid* data)
+{
+    EVENT("(GLenum target = 0x%X, GLint level = %d, GLint xoffset = %d, GLint yoffset = %d, "
+        "GLint zoffset = %d, GLsizei width = %d, GLsizei height = %d, GLsizei depth = %d, "
+        "GLenum format = 0x%X, GLsizei imageSize = %d, const GLvoid* data = 0x%0.8p)",
+        target, level, xoffset, yoffset, zoffset, width, height, depth, format, imageSize, data);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(format);
+        if (imageSize < 0 || static_cast<GLuint>(imageSize) != formatInfo.computeBlockSize(GL_UNSIGNED_BYTE, width, height))
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if (!data)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        // validateES3TexImageFormat sets the error code if there is an error
+        if (!ValidateES3TexImageParameters(context, target, level, GL_NONE, true, true,
+                                           0, 0, 0, width, height, depth, 0, GL_NONE, GL_NONE, data))
+        {
+            return;
+        }
+
+        // Zero sized uploads are valid but no-ops
+        if (width == 0 || height == 0)
+        {
+            return;
+        }
+
+        switch(target)
+        {
+          case GL_TEXTURE_3D:
+            {
+                gl::Texture3D *texture = context->getTexture3D();
+                texture->subImageCompressed(level, xoffset, yoffset, zoffset, width, height, depth,
+                                            format, imageSize, data);
+            }
+            break;
+
+          case GL_TEXTURE_2D_ARRAY:
+            {
+                gl::Texture2DArray *texture = context->getTexture2DArray();
+                texture->subImageCompressed(level, xoffset, yoffset, zoffset, width, height, depth,
+                                            format, imageSize, data);
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
     }
 }
 
-void __stdcall glTexParameteriv(GLenum target, GLenum pname, const GLint* params)
+void __stdcall glGenQueries(GLsizei n, GLuint* ids)
 {
-    glTexParameteri(target, pname, *params);
+    EVENT("(GLsizei n = %d, GLuint* ids = 0x%0.8p)", n, ids);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (n < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        for (GLsizei i = 0; i < n; i++)
+        {
+            ids[i] = context->createQuery();
+        }
+    }
 }
 
-void __stdcall glTexStorage2DEXT(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height)
+void __stdcall glDeleteQueries(GLsizei n, const GLuint* ids)
 {
-    EVENT("(GLenum target = 0x%X, GLsizei levels = %d, GLenum internalformat = 0x%X, GLsizei width = %d, GLsizei height = %d)",
-           target, levels, internalformat, width, height);
+    EVENT("(GLsizei n = %d, GLuint* ids = 0x%0.8p)", n, ids);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (target != GL_TEXTURE_2D && target != GL_TEXTURE_CUBE_MAP)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (width < 1 || height < 1 || levels < 1)
+        if (n < 0)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        if (target == GL_TEXTURE_CUBE_MAP && width != height)
+        for (GLsizei i = 0; i < n; i++)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->deleteQuery(ids[i]);
         }
+    }
+}
 
-        if (levels != 1 && levels != gl::log2(std::max(width, height)) + 1)
+GLboolean __stdcall glIsQuery(GLuint id)
+{
+    EVENT("(GLuint id = %u)", id);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_OPERATION);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
         }
 
-        GLenum format = gl::ExtractFormat(internalformat);
-        GLenum type = gl::ExtractType(internalformat);
+        return (context->getQuery(id, false, GL_NONE) != NULL) ? GL_TRUE : GL_FALSE;
+    }
 
-        if (format == GL_NONE || type == GL_NONE)
+    return GL_FALSE;
+}
+
+void __stdcall glBeginQuery(GLenum target, GLuint id)
+{
+    EVENT("(GLenum target = 0x%X, GLuint id = %u)", target, id);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (!ValidateBeginQuery(context, target, id))
+        {
+            return;
+        }
 
-        if (context)
+        gl::Error error = context->beginQuery(target, id);
+        if (error.isError())
         {
-            switch (target)
-            {
-              case GL_TEXTURE_2D:
-                if (width > context->getMaximumTextureDimension() ||
-                    height > context->getMaximumTextureDimension())
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              case GL_TEXTURE_CUBE_MAP:
-                if (width > context->getMaximumCubeTextureDimension() ||
-                    height > context->getMaximumCubeTextureDimension())
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-                break;
-              default:
-                return gl::error(GL_INVALID_ENUM);
-            }
+            context->recordError(error);
+            return;
+        }
+    }
+}
+
+void __stdcall glEndQuery(GLenum target)
+{
+    EVENT("(GLenum target = 0x%X)", target);
 
-            if (levels != 1 && !context->supportsNonPower2Texture())
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateEndQuery(context, target))
+        {
+            return;
+        }
+
+        gl::Error error = context->endQuery(target);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
+        }
+    }
+}
+
+void __stdcall glGetQueryiv(GLenum target, GLenum pname, GLint* params)
+{
+    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", target, pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidQueryType(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_CURRENT_QUERY:
+            params[0] = static_cast<GLint>(context->getState().getActiveQueryId(target));
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+    }
+}
+
+void __stdcall glGetQueryObjectuiv(GLuint id, GLenum pname, GLuint* params)
+{
+    EVENT("(GLuint id = %u, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", id, pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        gl::Query *queryObject = context->getQuery(id, false, GL_NONE);
+
+        if (!queryObject)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (context->getState().getActiveQueryId(queryObject->getType()) == id)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        switch(pname)
+        {
+          case GL_QUERY_RESULT_EXT:
             {
-                if (!gl::isPow2(width) || !gl::isPow2(height))
+                gl::Error error = queryObject->getResult(params);
+                if (error.isError())
                 {
-                    return gl::error(GL_INVALID_OPERATION);
+                    context->recordError(error);
+                    return;
                 }
             }
+            break;
 
-            switch (internalformat)
+          case GL_QUERY_RESULT_AVAILABLE_EXT:
             {
-              case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-              case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-                if (!context->supportsDXT1Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-                if (!context->supportsDXT3Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-                if (!context->supportsDXT5Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_RGBA32F_EXT:
-              case GL_RGB32F_EXT:
-              case GL_ALPHA32F_EXT:
-              case GL_LUMINANCE32F_EXT:
-              case GL_LUMINANCE_ALPHA32F_EXT:
-                if (!context->supportsFloat32Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                break;
-              case GL_RGBA16F_EXT:
-              case GL_RGB16F_EXT:
-              case GL_ALPHA16F_EXT:
-              case GL_LUMINANCE16F_EXT:
-              case GL_LUMINANCE_ALPHA16F_EXT:
-                if (!context->supportsFloat16Textures())
+                gl::Error error = queryObject->isResultAvailable(params);
+                if (error.isError())
                 {
-                    return gl::error(GL_INVALID_ENUM);
+                    context->recordError(error);
+                    return;
                 }
-                break;
-              case GL_DEPTH_COMPONENT16:
-              case GL_DEPTH_COMPONENT32_OES:
-              case GL_DEPTH24_STENCIL8_OES:
-                if (!context->supportsDepthTextures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                if (target != GL_TEXTURE_2D)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                // ANGLE_depth_texture only supports 1-level textures
-                if (levels != 1)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                break;
-              default:
-                break;
             }
+            break;
 
-            if (target == GL_TEXTURE_2D)
-            {
-                gl::Texture2D *texture = context->getTexture2D();
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+    }
+}
 
-                if (!texture || texture->id() == 0)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+GLboolean __stdcall glUnmapBuffer(GLenum target)
+{
+    EVENT("(GLenum target = 0x%X)", target);
 
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
+        }
 
-                texture->storage(levels, internalformat, width, height);
-            }
-            else if (target == GL_TEXTURE_CUBE_MAP)
-            {
-                gl::TextureCubeMap *texture = context->getTextureCubeMap();
+        return glUnmapBufferOES(target);
+    }
 
-                if (!texture || texture->id() == 0)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+    return GL_FALSE;
+}
 
-                if (texture->isImmutable())
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+void __stdcall glGetBufferPointerv(GLenum target, GLenum pname, GLvoid** params)
+{
+    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLvoid** params = 0x%0.8p)", target, pname, params);
 
-                texture->storage(levels, internalformat, width);
-            }
-            else UNREACHABLE();
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
+
+        glGetBufferPointervOES(target, pname, params);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glDrawBuffers(GLsizei n, const GLenum* bufs)
+{
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        glDrawBuffersEXT(n, bufs);
     }
 }
 
-void __stdcall glTexSubImage2D(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                               GLenum format, GLenum type, const GLvoid* pixels)
+void __stdcall glUniformMatrix2x3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
 {
-    EVENT("(GLenum target = 0x%X, GLint level = %d, GLint xoffset = %d, GLint yoffset = %d, "
-          "GLsizei width = %d, GLsizei height = %d, GLenum format = 0x%X, GLenum type = 0x%X, "
-          "const GLvoid* pixels = 0x%0.8p)",
-           target, level, xoffset, yoffset, width, height, format, type, pixels);
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (!gl::IsInternalTextureTarget(target))
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT2x3, location, count, transpose))
         {
-            return gl::error(GL_INVALID_ENUM);
+            return;
         }
 
-        if (level < 0 || xoffset < 0 || yoffset < 0 || width < 0 || height < 0)
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix2x3fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUniformMatrix3x2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT3x2, location, count, transpose))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (std::numeric_limits<GLsizei>::max() - xoffset < width || std::numeric_limits<GLsizei>::max() - yoffset < height)
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix3x2fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUniformMatrix2x4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT2x4, location, count, transpose))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (!checkTextureFormatType(format, type))
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix2x4fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUniformMatrix4x2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT4x2, location, count, transpose))
         {
-            return; // error is set by helper function
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix4x2fv(location, count, transpose, value);
+    }
+}
 
-        if (context)
+void __stdcall glUniformMatrix3x4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT3x4, location, count, transpose))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix3x4fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glUniformMatrix4x3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %u, const GLfloat* value = 0x%0.8p)",
+          location, count, transpose, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniformMatrix(context, GL_FLOAT_MAT4x3, location, count, transpose))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniformMatrix4x3fv(location, count, transpose, value);
+    }
+}
+
+void __stdcall glBlitFramebuffer(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter)
+{
+    EVENT("(GLint srcX0 = %d, GLint srcY0 = %d, GLint srcX1 = %d, GLint srcY1 = %d, GLint dstX0 = %d, "
+          "GLint dstY0 = %d, GLint dstX1 = %d, GLint dstY1 = %d, GLbitfield mask = 0x%X, GLenum filter = 0x%X)",
+          srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1, mask, filter);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateBlitFramebufferParameters(context, srcX0, srcY0, srcX1, srcY1,
+                                               dstX0, dstY0, dstX1, dstY1, mask, filter,
+                                               false))
+        {
+            return;
+        }
+
+        context->blitFramebuffer(srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1,
+                                 mask, filter);
+    }
+}
+
+void __stdcall glRenderbufferStorageMultisample(GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height)
+{
+    EVENT("(GLenum target = 0x%X, GLsizei samples = %d, GLenum internalformat = 0x%X, GLsizei width = %d, GLsizei height = %d)",
+        target, samples, internalformat, width, height);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateRenderbufferStorageParameters(context, target, samples, internalformat,
+                                                   width, height, false))
+        {
+            return;
+        }
+
+        context->setRenderbufferStorage(width, height, internalformat, samples);
+    }
+}
+
+void __stdcall glFramebufferTextureLayer(GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer)
+{
+    EVENT("(GLenum target = 0x%X, GLenum attachment = 0x%X, GLuint texture = %u, GLint level = %d, GLint layer = %d)",
+        target, attachment, texture, level, layer);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateFramebufferTextureLayer(context, target, attachment, texture,
+                                             level, layer))
+        {
+            return;
+        }
+
+        gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+        ASSERT(framebuffer);
+
+        gl::Texture *textureObject = context->getTexture(texture);
+        GLenum textarget = textureObject ? textureObject->getTarget() : GL_NONE;
+
+        if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+        {
+            const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
+            framebuffer->setColorbuffer(colorAttachment, textarget, texture, level, layer);
+        }
+        else
         {
-            if (level > context->getMaximumTextureLevel())
+            switch (attachment)
             {
-                return gl::error(GL_INVALID_VALUE);
+              case GL_DEPTH_ATTACHMENT:         framebuffer->setDepthbuffer(textarget, texture, level, layer);        break;
+              case GL_STENCIL_ATTACHMENT:       framebuffer->setStencilbuffer(textarget, texture, level, layer);      break;
+              case GL_DEPTH_STENCIL_ATTACHMENT: framebuffer->setDepthStencilBuffer(textarget, texture, level, layer); break;
             }
+        }
+    }
+}
+
+GLvoid* __stdcall glMapBufferRange(GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access)
+{
+    EVENT("(GLenum target = 0x%X, GLintptr offset = %d, GLsizeiptr length = %d, GLbitfield access = 0x%X)",
+          target, offset, length, access);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        return glMapBufferRangeEXT(target, offset, length, access);
+    }
+
+    return NULL;
+}
+
+void __stdcall glFlushMappedBufferRange(GLenum target, GLintptr offset, GLsizeiptr length)
+{
+    EVENT("(GLenum target = 0x%X, GLintptr offset = %d, GLsizeiptr length = %d)", target, offset, length);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        glFlushMappedBufferRangeEXT(target, offset, length);
+    }
+}
+
+void __stdcall glBindVertexArray(GLuint array)
+{
+    EVENT("(GLuint array = %u)", array);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        gl::VertexArray *vao = context->getVertexArray(array);
+
+        if (!vao)
+        {
+            // The default VAO should always exist
+            ASSERT(array != 0);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        context->bindVertexArray(array);
+    }
+}
+
+void __stdcall glDeleteVertexArrays(GLsizei n, const GLuint* arrays)
+{
+    EVENT("(GLsizei n = %d, const GLuint* arrays = 0x%0.8p)", n, arrays);
 
-            if (format == GL_FLOAT)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (n < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        for (int arrayIndex = 0; arrayIndex < n; arrayIndex++)
+        {
+            if (arrays[arrayIndex] != 0)
             {
-                if (!context->supportsFloat32Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
+                context->deleteVertexArray(arrays[arrayIndex]);
             }
-            else if (format == GL_HALF_FLOAT_OES)
+        }
+    }
+}
+
+void __stdcall glGenVertexArrays(GLsizei n, GLuint* arrays)
+{
+    EVENT("(GLsizei n = %d, GLuint* arrays = 0x%0.8p)", n, arrays);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (n < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        for (int arrayIndex = 0; arrayIndex < n; arrayIndex++)
+        {
+            arrays[arrayIndex] = context->createVertexArray();
+        }
+    }
+}
+
+GLboolean __stdcall glIsVertexArray(GLuint array)
+{
+    EVENT("(GLuint array = %u)", array);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
+        }
+
+        if (array == 0)
+        {
+            return GL_FALSE;
+        }
+
+        gl::VertexArray *vao = context->getVertexArray(array);
+
+        return (vao != NULL ? GL_TRUE : GL_FALSE);
+    }
+
+    return GL_FALSE;
+}
+
+void __stdcall glGetIntegeri_v(GLenum target, GLuint index, GLint* data)
+{
+    EVENT("(GLenum target = 0x%X, GLuint index = %u, GLint* data = 0x%0.8p)",
+          target, index, data);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        const gl::Caps &caps = context->getCaps();
+        switch (target)
+        {
+          case GL_TRANSFORM_FEEDBACK_BUFFER_START:
+          case GL_TRANSFORM_FEEDBACK_BUFFER_SIZE:
+          case GL_TRANSFORM_FEEDBACK_BUFFER_BINDING:
+            if (index >= caps.maxTransformFeedbackSeparateAttributes)
             {
-                if (!context->supportsFloat16Textures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-            else if (gl::IsDepthTexture(format))
+            break;
+
+          case GL_UNIFORM_BUFFER_START:
+          case GL_UNIFORM_BUFFER_SIZE:
+          case GL_UNIFORM_BUFFER_BINDING:
+            if (index >= caps.maxCombinedUniformBlocks)
             {
-                if (!context->supportsDepthTextures())
-                {
-                    return gl::error(GL_INVALID_ENUM);
-                }
-                if (target != GL_TEXTURE_2D)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                // OES_depth_texture supports loading depth data, but ANGLE_depth_texture does not
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            if (width == 0 || height == 0 || pixels == NULL)
+        if (!(context->getIndexedIntegerv(target, index, data)))
+        {
+            GLenum nativeType;
+            unsigned int numParams = 0;
+            if (!context->getIndexedQueryParameterInfo(target, &nativeType, &numParams))
             {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
                 return;
             }
 
-            if (target == GL_TEXTURE_2D)
+            if (numParams == 0)
             {
-                gl::Texture2D *texture = context->getTexture2D();
-                if (validateSubImageParams2D(false, width, height, xoffset, yoffset, level, format, type, texture))
-                {
-                    texture->subImage(level, xoffset, yoffset, width, height, format, type, context->getUnpackAlignment(), pixels);
-                }
+                return; // it is known that pname is valid, but there are no parameters to return
             }
-            else if (gl::IsCubemapTextureTarget(target))
+
+            if (nativeType == GL_INT_64_ANGLEX)
             {
-                gl::TextureCubeMap *texture = context->getTextureCubeMap();
-                if (validateSubImageParamsCube(false, width, height, xoffset, yoffset, target, level, format, type, texture))
+                GLint64 minIntValue = static_cast<GLint64>(std::numeric_limits<int>::min());
+                GLint64 maxIntValue = static_cast<GLint64>(std::numeric_limits<int>::max());
+                GLint64 *int64Params = new GLint64[numParams];
+
+                context->getIndexedInteger64v(target, index, int64Params);
+
+                for (unsigned int i = 0; i < numParams; ++i)
                 {
-                    texture->subImage(target, level, xoffset, yoffset, width, height, format, type, context->getUnpackAlignment(), pixels);
+                    GLint64 clampedValue = std::max(std::min(int64Params[i], maxIntValue), minIntValue);
+                    data[i] = static_cast<GLint>(clampedValue);
                 }
+
+                delete [] int64Params;
             }
             else
             {
@@ -5976,897 +5939,2368 @@ void __stdcall glTexSubImage2D(GLenum target, GLint level, GLint xoffset, GLint
             }
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glBeginTransformFeedback(GLenum primitiveMode)
+{
+    EVENT("(GLenum primitiveMode = 0x%X)", primitiveMode);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        switch (primitiveMode)
+        {
+          case GL_TRIANGLES:
+          case GL_LINES:
+          case GL_POINTS:
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::TransformFeedback *transformFeedback = context->getState().getCurrentTransformFeedback();
+        ASSERT(transformFeedback != NULL);
+
+        if (transformFeedback->isStarted())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (transformFeedback->isPaused())
+        {
+            transformFeedback->resume();
+        }
+        else
+        {
+            transformFeedback->start(primitiveMode);
+        }
     }
 }
 
-void __stdcall glUniform1f(GLint location, GLfloat x)
+void __stdcall glEndTransformFeedback(void)
 {
-    glUniform1fv(location, 1, &x);
+    EVENT("(void)");
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        gl::TransformFeedback *transformFeedback = context->getState().getCurrentTransformFeedback();
+        ASSERT(transformFeedback != NULL);
+
+        if (!transformFeedback->isStarted())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        transformFeedback->stop();
+    }
 }
 
-void __stdcall glUniform1fv(GLint location, GLsizei count, const GLfloat* v)
+void __stdcall glBindBufferRange(GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLenum target = 0x%X, GLuint index = %u, GLuint buffer = %u, GLintptr offset = %d, GLsizeiptr size = %d)",
+          target, index, buffer, offset, size);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (location == -1)
+        const gl::Caps &caps = context->getCaps();
+        switch (target)
         {
+          case GL_TRANSFORM_FEEDBACK_BUFFER:
+            if (index >= caps.maxTransformFeedbackSeparateAttributes)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          case GL_UNIFORM_BUFFER:
+            if (index >= caps.maxUniformBufferBindings)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (buffer != 0 && size <= 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-        if (context)
+        switch (target)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+          case GL_TRANSFORM_FEEDBACK_BUFFER:
+
+            // size and offset must be a multiple of 4
+            if (buffer != 0 && ((offset % 4) != 0 || (size % 4) != 0))
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
 
-            if (!programBinary->setUniform1fv(location, count, v))
+            context->bindIndexedTransformFeedbackBuffer(buffer, index, offset, size);
+            context->bindGenericTransformFeedbackBuffer(buffer);
+            break;
+
+          case GL_UNIFORM_BUFFER:
+
+            // it is an error to bind an offset not a multiple of the alignment
+            if (buffer != 0 && (offset % caps.uniformBufferOffsetAlignment) != 0)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+
+            context->bindIndexedUniformBuffer(buffer, index, offset, size);
+            context->bindGenericUniformBuffer(buffer);
+            break;
+
+          default:
+            UNREACHABLE();
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
-void __stdcall glUniform1i(GLint location, GLint x)
+void __stdcall glBindBufferBase(GLenum target, GLuint index, GLuint buffer)
 {
-    glUniform1iv(location, 1, &x);
+    EVENT("(GLenum target = 0x%X, GLuint index = %u, GLuint buffer = %u)",
+          target, index, buffer);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        const gl::Caps &caps = context->getCaps();
+        switch (target)
+        {
+          case GL_TRANSFORM_FEEDBACK_BUFFER:
+            if (index >= caps.maxTransformFeedbackSeparateAttributes)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          case GL_UNIFORM_BUFFER:
+            if (index >= caps.maxUniformBufferBindings)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        switch (target)
+        {
+          case GL_TRANSFORM_FEEDBACK_BUFFER:
+            context->bindIndexedTransformFeedbackBuffer(buffer, index, 0, 0);
+            context->bindGenericTransformFeedbackBuffer(buffer);
+            break;
+
+          case GL_UNIFORM_BUFFER:
+            context->bindIndexedUniformBuffer(buffer, index, 0, 0);
+            context->bindGenericUniformBuffer(buffer);
+            break;
+
+          default:
+            UNREACHABLE();
+        }
+    }
 }
 
-void __stdcall glUniform1iv(GLint location, GLsizei count, const GLint* v)
+void __stdcall glTransformFeedbackVaryings(GLuint program, GLsizei count, const GLchar* const* varyings, GLenum bufferMode)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLuint program = %u, GLsizei count = %d, const GLchar* const* varyings = 0x%0.8p, GLenum bufferMode = 0x%X)",
+          program, count, varyings, bufferMode);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (location == -1)
+        if (count < 0)
         {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        const gl::Caps &caps = context->getCaps();
+        switch (bufferMode)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+          case GL_INTERLEAVED_ATTRIBS:
+            break;
+          case GL_SEPARATE_ATTRIBS:
+            if (static_cast<GLuint>(count) > caps.maxTransformFeedbackSeparateAttributes)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+            break;
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            if (!programBinary->setUniform1iv(location, count, v))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        if (!gl::ValidProgram(context, program))
+        {
+            return;
         }
+
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+
+        programObject->setTransformFeedbackVaryings(count, varyings, bufferMode);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glGetTransformFeedbackVarying(GLuint program, GLuint index, GLsizei bufSize, GLsizei* length, GLsizei* size, GLenum* type, GLchar* name)
+{
+    EVENT("(GLuint program = %u, GLuint index = %u, GLsizei bufSize = %d, GLsizei* length = 0x%0.8p, "
+          "GLsizei* size = 0x%0.8p, GLenum* type = 0x%0.8p, GLchar* name = 0x%0.8p)",
+          program, index, bufSize, length, size, type, name);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (bufSize < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if (!gl::ValidProgram(context, program))
+        {
+            return;
+        }
+
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+
+        if (index >= static_cast<GLuint>(programObject->getTransformFeedbackVaryingCount()))
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        programObject->getTransformFeedbackVarying(index, bufSize, length, size, type, name);
     }
 }
 
-void __stdcall glUniform2f(GLint location, GLfloat x, GLfloat y)
+void __stdcall glVertexAttribIPointer(GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid* pointer)
 {
-    GLfloat xy[2] = {x, y};
+    EVENT("(GLuint index = %u, GLint size = %d, GLenum type = 0x%X, GLsizei stride = %d, const GLvoid* pointer = 0x%0.8p)",
+          index, size, type, stride, pointer);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if (size < 1 || size > 4)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        switch (type)
+        {
+          case GL_BYTE:
+          case GL_UNSIGNED_BYTE:
+          case GL_SHORT:
+          case GL_UNSIGNED_SHORT:
+          case GL_INT:
+          case GL_UNSIGNED_INT:
+          case GL_INT_2_10_10_10_REV:
+          case GL_UNSIGNED_INT_2_10_10_10_REV:
+            break;
 
-    glUniform2fv(location, 1, (GLfloat*)&xy);
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        if (stride < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if ((type == GL_INT_2_10_10_10_REV || type == GL_UNSIGNED_INT_2_10_10_10_REV) && size != 4)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // [OpenGL ES 3.0.2] Section 2.8 page 24:
+        // An INVALID_OPERATION error is generated when a non-zero vertex array object
+        // is bound, zero is bound to the ARRAY_BUFFER buffer object binding point,
+        // and the pointer argument is not NULL.
+        if (context->getState().getVertexArray()->id() != 0 && context->getState().getArrayBufferId() == 0 && pointer != NULL)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        context->getState().setVertexAttribState(index, context->getState().getTargetBuffer(GL_ARRAY_BUFFER), size, type, false, true,
+                                                 stride, pointer);
+    }
 }
 
-void __stdcall glUniform2fv(GLint location, GLsizei count, const GLfloat* v)
+void __stdcall glGetVertexAttribIiv(GLuint index, GLenum pname, GLint* params)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLuint index = %u, GLenum pname = 0x%X, GLint* params = 0x%0.8p)",
+          index, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-        
-        if (location == -1)
+
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        const gl::VertexAttribute &attribState = context->getState().getVertexAttribState(index);
 
-        if (context)
+        if (!gl::ValidateGetVertexAttribParameters(context, pname))
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            return;
+        }
 
-            if (!programBinary->setUniform2fv(location, count, v))
+        if (pname == GL_CURRENT_VERTEX_ATTRIB)
+        {
+            const gl::VertexAttribCurrentValueData &currentValueData = context->getState().getVertexAttribCurrentValue(index);
+            for (int i = 0; i < 4; ++i)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                params[i] = currentValueData.IntValues[i];
             }
         }
+        else
+        {
+            *params = gl::QuerySingleVertexAttributeParameter<GLint>(attribState, pname);
+        }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glGetVertexAttribIuiv(GLuint index, GLenum pname, GLuint* params)
+{
+    EVENT("(GLuint index = %u, GLenum pname = 0x%X, GLuint* params = 0x%0.8p)",
+          index, pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        const gl::VertexAttribute &attribState = context->getState().getVertexAttribState(index);
+
+        if (!gl::ValidateGetVertexAttribParameters(context, pname))
+        {
+            return;
+        }
+
+        if (pname == GL_CURRENT_VERTEX_ATTRIB)
+        {
+            const gl::VertexAttribCurrentValueData &currentValueData = context->getState().getVertexAttribCurrentValue(index);
+            for (int i = 0; i < 4; ++i)
+            {
+                params[i] = currentValueData.UnsignedIntValues[i];
+            }
+        }
+        else
+        {
+            *params = gl::QuerySingleVertexAttributeParameter<GLuint>(attribState, pname);
+        }
     }
 }
 
-void __stdcall glUniform2i(GLint location, GLint x, GLint y)
+void __stdcall glVertexAttribI4i(GLuint index, GLint x, GLint y, GLint z, GLint w)
 {
-    GLint xy[4] = {x, y};
+    EVENT("(GLuint index = %u, GLint x = %d, GLint y = %d, GLint z = %d, GLint w = %d)",
+          index, x, y, z, w);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-    glUniform2iv(location, 1, (GLint*)&xy);
+        GLint vals[4] = { x, y, z, w };
+        context->getState().setVertexAttribi(index, vals);
+    }
 }
 
-void __stdcall glUniform2iv(GLint location, GLsizei count, const GLint* v)
+void __stdcall glVertexAttribI4ui(GLuint index, GLuint x, GLuint y, GLuint z, GLuint w)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLuint index = %u, GLuint x = %u, GLuint y = %u, GLuint z = %u, GLuint w = %u)",
+          index, x, y, z, w);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (location == -1)
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        GLuint vals[4] = { x, y, z, w };
+        context->getState().setVertexAttribu(index, vals);
+    }
+}
+
+void __stdcall glVertexAttribI4iv(GLuint index, const GLint* v)
+{
+    EVENT("(GLuint index = %u, const GLint* v = 0x%0.8p)", index, v);
 
-        if (context)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (!programBinary->setUniform2iv(location, count, v))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
+
+        context->getState().setVertexAttribi(index, v);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glVertexAttribI4uiv(GLuint index, const GLuint* v)
+{
+    EVENT("(GLuint index = %u, const GLuint* v = 0x%0.8p)", index, v);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        context->getState().setVertexAttribu(index, v);
     }
 }
 
-void __stdcall glUniform3f(GLint location, GLfloat x, GLfloat y, GLfloat z)
+void __stdcall glGetUniformuiv(GLuint program, GLint location, GLuint* params)
 {
-    GLfloat xyz[3] = {x, y, z};
+    EVENT("(GLuint program = %u, GLint location = %d, GLuint* params = 0x%0.8p)",
+          program, location, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateGetUniformuiv(context, program, location, params))
+        {
+            return;
+        }
+
+        gl::Program *programObject = context->getProgram(program);
+        ASSERT(programObject);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        ASSERT(programBinary);
 
-    glUniform3fv(location, 1, (GLfloat*)&xyz);
+        programBinary->getUniformuiv(location, params);
+    }
 }
 
-void __stdcall glUniform3fv(GLint location, GLsizei count, const GLfloat* v)
+GLint __stdcall glGetFragDataLocation(GLuint program, const GLchar *name)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLuint program = %u, const GLchar *name = 0x%0.8p)",
+          program, name);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return -1;
         }
 
-        if (location == -1)
+        if (program == 0)
         {
-            return;
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return -1;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject || !programObject->isLinked())
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return -1;
+        }
 
-            if (!programBinary->setUniform3fv(location, count, v))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        if (!programBinary)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return -1;
         }
+
+        return programBinary->getFragDataLocation(name);
     }
-    catch(std::bad_alloc&)
+
+    return 0;
+}
+
+void __stdcall glUniform1ui(GLint location, GLuint v0)
+{
+    glUniform1uiv(location, 1, &v0);
+}
+
+void __stdcall glUniform2ui(GLint location, GLuint v0, GLuint v1)
+{
+    const GLuint xy[] = { v0, v1 };
+    glUniform2uiv(location, 1, xy);
+}
+
+void __stdcall glUniform3ui(GLint location, GLuint v0, GLuint v1, GLuint v2)
+{
+    const GLuint xyz[] = { v0, v1, v2 };
+    glUniform3uiv(location, 1, xyz);
+}
+
+void __stdcall glUniform4ui(GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3)
+{
+    const GLuint xyzw[] = { v0, v1, v2, v3 };
+    glUniform4uiv(location, 1, xyzw);
+}
+
+void __stdcall glUniform1uiv(GLint location, GLsizei count, const GLuint* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLuint* value = 0x%0.8p)",
+          location, count, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (!ValidateUniform(context, GL_UNSIGNED_INT, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform1uiv(location, count, value);
     }
 }
 
-void __stdcall glUniform3i(GLint location, GLint x, GLint y, GLint z)
+void __stdcall glUniform2uiv(GLint location, GLsizei count, const GLuint* value)
 {
-    GLint xyz[3] = {x, y, z};
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLuint* value = 0x%0.8p)",
+          location, count, value);
 
-    glUniform3iv(location, 1, (GLint*)&xyz);
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_UNSIGNED_INT_VEC2, location, count))
+        {
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform2uiv(location, count, value);
+    }
 }
 
-void __stdcall glUniform3iv(GLint location, GLsizei count, const GLint* v)
+void __stdcall glUniform3uiv(GLint location, GLsizei count, const GLuint* value)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLuint* value)",
+          location, count, value);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (!ValidateUniform(context, GL_UNSIGNED_INT_VEC3, location, count))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (location == -1)
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform3uiv(location, count, value);
+    }
+}
+
+void __stdcall glUniform4uiv(GLint location, GLsizei count, const GLuint* value)
+{
+    EVENT("(GLint location = %d, GLsizei count = %d, const GLuint* value = 0x%0.8p)",
+          location, count, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateUniform(context, GL_UNSIGNED_INT_VEC4, location, count))
         {
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+        programBinary->setUniform4uiv(location, count, value);
+    }
+}
 
-        if (context)
+void __stdcall glClearBufferiv(GLenum buffer, GLint drawbuffer, const GLint* value)
+{
+    EVENT("(GLenum buffer = 0x%X, GLint drawbuffer = %d, const GLint* value = 0x%0.8p)",
+          buffer, drawbuffer, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateClearBuffer(context))
+        {
+            return;
+        }
+
+        switch (buffer)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+          case GL_COLOR:
+            if (drawbuffer < 0 || static_cast<GLuint>(drawbuffer) >= context->getCaps().maxDrawBuffers)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+            break;
 
-            if (!programBinary->setUniform3iv(location, count, v))
+          case GL_STENCIL:
+            if (drawbuffer != 0)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
-        }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-}
+            break;
 
-void __stdcall glUniform4f(GLint location, GLfloat x, GLfloat y, GLfloat z, GLfloat w)
-{
-    GLfloat xyzw[4] = {x, y, z, w};
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-    glUniform4fv(location, 1, (GLfloat*)&xyzw);
+        gl::Error error = context->clearBufferiv(buffer, drawbuffer, value);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
+        }
+    }
 }
 
-void __stdcall glUniform4fv(GLint location, GLsizei count, const GLfloat* v)
+void __stdcall glClearBufferuiv(GLenum buffer, GLint drawbuffer, const GLuint* value)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLfloat* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLenum buffer = 0x%X, GLint drawbuffer = %d, const GLuint* value = 0x%0.8p)",
+          buffer, drawbuffer, value);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (!ValidateClearBuffer(context))
         {
-            return gl::error(GL_INVALID_VALUE);
+            return;
         }
 
-        if (location == -1)
+        switch (buffer)
         {
+          case GL_COLOR:
+            if (drawbuffer < 0 || static_cast<GLuint>(drawbuffer) >= context->getCaps().maxDrawBuffers)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Error error = context->clearBufferuiv(buffer, drawbuffer, value);
+        if (error.isError())
+        {
+            context->recordError(error);
             return;
         }
+    }
+}
 
-        gl::Context *context = gl::getNonLostContext();
+void __stdcall glClearBufferfv(GLenum buffer, GLint drawbuffer, const GLfloat* value)
+{
+    EVENT("(GLenum buffer = 0x%X, GLint drawbuffer = %d, const GLfloat* value = 0x%0.8p)",
+          buffer, drawbuffer, value);
 
-        if (context)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!ValidateClearBuffer(context))
+        {
+            return;
+        }
+
+        switch (buffer)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+          case GL_COLOR:
+            if (drawbuffer < 0 || static_cast<GLuint>(drawbuffer) >= context->getCaps().maxDrawBuffers)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+            break;
 
-            if (!programBinary->setUniform4fv(location, count, v))
+          case GL_DEPTH:
+            if (drawbuffer != 0)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Error error = context->clearBufferfv(buffer, drawbuffer, value);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glClearBufferfi(GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil)
+{
+    EVENT("(GLenum buffer = 0x%X, GLint drawbuffer = %d, GLfloat depth, GLint stencil = %d)",
+          buffer, drawbuffer, depth, stencil);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (!ValidateClearBuffer(context))
+        {
+            return;
+        }
+
+        switch (buffer)
+        {
+          case GL_DEPTH_STENCIL:
+            if (drawbuffer != 0)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Error error = context->clearBufferfi(buffer, drawbuffer, depth, stencil);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return;
+        }
     }
 }
 
-void __stdcall glUniform4i(GLint location, GLint x, GLint y, GLint z, GLint w)
+const GLubyte* __stdcall glGetStringi(GLenum name, GLuint index)
 {
-    GLint xyzw[4] = {x, y, z, w};
+    EVENT("(GLenum name = 0x%X, GLuint index = %u)", name, index);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        if (name != GL_EXTENSIONS)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return NULL;
+        }
+
+        if (index >= context->getExtensionStringCount())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return NULL;
+        }
+
+        return reinterpret_cast<const GLubyte*>(context->getExtensionString(index).c_str());
+    }
 
-    glUniform4iv(location, 1, (GLint*)&xyzw);
+    return NULL;
 }
 
-void __stdcall glUniform4iv(GLint location, GLsizei count, const GLint* v)
+void __stdcall glCopyBufferSubData(GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, const GLint* v = 0x%0.8p)", location, count, v);
+    EVENT("(GLenum readTarget = 0x%X, GLenum writeTarget = 0x%X, GLintptr readOffset = %d, GLintptr writeOffset = %d, GLsizeiptr size = %d)",
+          readTarget, writeTarget, readOffset, writeOffset, size);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (location == -1)
+        if (!gl::ValidBufferTarget(context, readTarget) || !gl::ValidBufferTarget(context, readTarget))
         {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Buffer *readBuffer = context->getState().getTargetBuffer(readTarget);
+        gl::Buffer *writeBuffer = context->getState().getTargetBuffer(writeTarget);
 
-        if (context)
+        if (!readBuffer || !writeBuffer)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (!programBinary->setUniform4iv(location, count, v))
+        // Verify that readBuffer and writeBuffer are not currently mapped
+        if (readBuffer->isMapped() || writeBuffer->isMapped())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (readOffset < 0 || writeOffset < 0 || size < 0 ||
+            static_cast<unsigned int>(readOffset + size) > readBuffer->getSize() ||
+            static_cast<unsigned int>(writeOffset + size) > writeBuffer->getSize())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if (readBuffer == writeBuffer && abs(readOffset - writeOffset) < size)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        // if size is zero, the copy is a successful no-op
+        if (size > 0)
+        {
+            gl::Error error = writeBuffer->copyBufferSubData(readBuffer, readOffset, writeOffset, size);
+            if (error.isError())
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(error);
+                return;
             }
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
-void __stdcall glUniformMatrix2fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+void __stdcall glGetUniformIndices(GLuint program, GLsizei uniformCount, const GLchar* const* uniformNames, GLuint* uniformIndices)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %d, const GLfloat* value = 0x%0.8p)",
-          location, count, transpose, value);
+    EVENT("(GLuint program = %u, GLsizei uniformCount = %d, const GLchar* const* uniformNames = 0x%0.8p, GLuint* uniformIndices = 0x%0.8p)",
+          program, uniformCount, uniformNames, uniformIndices);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0 || transpose != GL_FALSE)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (location == -1)
+        if (uniformCount < 0)
         {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+            if (context->getShader(program))
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+        }
 
-            if (!programBinary->setUniformMatrix2fv(location, count, value))
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        if (!programObject->isLinked() || !programBinary)
+        {
+            for (int uniformId = 0; uniformId < uniformCount; uniformId++)
             {
-                return gl::error(GL_INVALID_OPERATION);
+                uniformIndices[uniformId] = GL_INVALID_INDEX;
+            }
+        }
+        else
+        {
+            for (int uniformId = 0; uniformId < uniformCount; uniformId++)
+            {
+                uniformIndices[uniformId] = programBinary->getUniformIndex(uniformNames[uniformId]);
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
     }
 }
 
-void __stdcall glUniformMatrix3fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+void __stdcall glGetActiveUniformsiv(GLuint program, GLsizei uniformCount, const GLuint* uniformIndices, GLenum pname, GLint* params)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %d, const GLfloat* value = 0x%0.8p)",
-          location, count, transpose, value);
+    EVENT("(GLuint program = %u, GLsizei uniformCount = %d, const GLuint* uniformIndices = 0x%0.8p, GLenum pname = 0x%X, GLint* params = 0x%0.8p)",
+          program, uniformCount, uniformIndices, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0 || transpose != GL_FALSE)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (location == -1)
+        if (uniformCount < 0)
         {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+            if (context->getShader(program))
+            {
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
+
+        switch (pname)
+        {
+          case GL_UNIFORM_TYPE:
+          case GL_UNIFORM_SIZE:
+          case GL_UNIFORM_NAME_LENGTH:
+          case GL_UNIFORM_BLOCK_INDEX:
+          case GL_UNIFORM_OFFSET:
+          case GL_UNIFORM_ARRAY_STRIDE:
+          case GL_UNIFORM_MATRIX_STRIDE:
+          case GL_UNIFORM_IS_ROW_MAJOR:
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+
+        if (!programBinary && uniformCount > 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            if (!programBinary->setUniformMatrix3fv(location, count, value))
+        for (int uniformId = 0; uniformId < uniformCount; uniformId++)
+        {
+            const GLuint index = uniformIndices[uniformId];
+
+            if (index >= (GLuint)programBinary->getActiveUniformCount())
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
         }
+
+        for (int uniformId = 0; uniformId < uniformCount; uniformId++)
+        {
+            const GLuint index = uniformIndices[uniformId];
+            params[uniformId] = programBinary->getActiveUniformi(index, pname);
+        }
     }
-    catch(std::bad_alloc&)
+}
+
+GLuint __stdcall glGetUniformBlockIndex(GLuint program, const GLchar* uniformBlockName)
+{
+    EVENT("(GLuint program = %u, const GLchar* uniformBlockName = 0x%0.8p)", program, uniformBlockName);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_INVALID_INDEX;
+        }
+
+        gl::Program *programObject = context->getProgram(program);
+
+        if (!programObject)
+        {
+            if (context->getShader(program))
+            {
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return GL_INVALID_INDEX;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return GL_INVALID_INDEX;
+            }
+        }
+
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+        if (!programBinary)
+        {
+            return GL_INVALID_INDEX;
+        }
+
+        return programBinary->getUniformBlockIndex(uniformBlockName);
     }
+
+    return 0;
 }
 
-void __stdcall glUniformMatrix4fv(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value)
+void __stdcall glGetActiveUniformBlockiv(GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint* params)
 {
-    EVENT("(GLint location = %d, GLsizei count = %d, GLboolean transpose = %d, const GLfloat* value = 0x%0.8p)",
-          location, count, transpose, value);
+    EVENT("(GLuint program = %u, GLuint uniformBlockIndex = %u, GLenum pname = 0x%X, GLint* params = 0x%0.8p)",
+          program, uniformBlockIndex, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (count < 0 || transpose != GL_FALSE)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
+        gl::Program *programObject = context->getProgram(program);
 
-        if (location == -1)
+        if (!programObject)
         {
+            if (context->getShader(program))
+            {
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
+            }
+            else
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+        }
+
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+
+        if (!programBinary || uniformBlockIndex >= programBinary->getActiveUniformBlockCount())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
             return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        switch (pname)
+        {
+          case GL_UNIFORM_BLOCK_BINDING:
+            *params = static_cast<GLint>(programObject->getUniformBlockBinding(uniformBlockIndex));
+            break;
 
-        if (context)
+          case GL_UNIFORM_BLOCK_DATA_SIZE:
+          case GL_UNIFORM_BLOCK_NAME_LENGTH:
+          case GL_UNIFORM_BLOCK_ACTIVE_UNIFORMS:
+          case GL_UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES:
+          case GL_UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER:
+          case GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER:
+            programBinary->getActiveUniformBlockiv(uniformBlockIndex, pname, params);
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+    }
+}
+
+void __stdcall glGetActiveUniformBlockName(GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei* length, GLchar* uniformBlockName)
+{
+    EVENT("(GLuint program = %u, GLuint uniformBlockIndex = %u, GLsizei bufSize = %d, GLsizei* length = 0x%0.8p, GLchar* uniformBlockName = 0x%0.8p)",
+          program, uniformBlockIndex, bufSize, length, uniformBlockName);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            gl::ProgramBinary *programBinary = context->getCurrentProgramBinary();
-            if (!programBinary)
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        gl::Program *programObject = context->getProgram(program);
+
+        if (!programObject)
+        {
+            if (context->getShader(program))
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-
-            if (!programBinary->setUniformMatrix4fv(location, count, value))
+            else
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+
+        if (!programBinary || uniformBlockIndex >= programBinary->getActiveUniformBlockCount())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        programBinary->getActiveUniformBlockName(uniformBlockIndex, bufSize, length, uniformBlockName);
     }
 }
 
-void __stdcall glUseProgram(GLuint program)
+void __stdcall glUniformBlockBinding(GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding)
 {
-    EVENT("(GLuint program = %d)", program);
+    EVENT("(GLuint program = %u, GLuint uniformBlockIndex = %u, GLuint uniformBlockBinding = %u)",
+          program, uniformBlockIndex, uniformBlockBinding);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-        if (context)
+        if (uniformBlockBinding >= context->getCaps().maxUniformBufferBindings)
         {
-            gl::Program *programObject = context->getProgram(program);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-            if (!programObject && program != 0)
+        gl::Program *programObject = context->getProgram(program);
+
+        if (!programObject)
+        {
+            if (context->getShader(program))
             {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-
-            if (program != 0 && !programObject->isLinked())
+            else
             {
-                return gl::error(GL_INVALID_OPERATION);
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
             }
+        }
 
-            context->useProgram(program);
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+
+        // if never linked, there won't be any uniform blocks
+        if (!programBinary || uniformBlockIndex >= programBinary->getActiveUniformBlockCount())
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
+
+        programObject->bindUniformBlock(uniformBlockIndex, uniformBlockBinding);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glDrawArraysInstanced(GLenum mode, GLint first, GLsizei count, GLsizei instanceCount)
+{
+    EVENT("(GLenum mode = 0x%X, GLint first = %d, GLsizei count = %d, GLsizei instanceCount = %d)",
+          mode, first, count, instanceCount);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // glDrawArraysInstanced
+        UNIMPLEMENTED();
     }
 }
 
-void __stdcall glValidateProgram(GLuint program)
+void __stdcall glDrawElementsInstanced(GLenum mode, GLsizei count, GLenum type, const GLvoid* indices, GLsizei instanceCount)
 {
-    EVENT("(GLuint program = %d)", program);
+    EVENT("(GLenum mode = 0x%X, GLsizei count = %d, GLenum type = 0x%X, const GLvoid* indices = 0x%0.8p, GLsizei instanceCount = %d)",
+          mode, count, type, indices, instanceCount);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-        if (context)
+        // glDrawElementsInstanced
+        UNIMPLEMENTED();
+    }
+}
+
+GLsync __stdcall glFenceSync(GLenum condition, GLbitfield flags)
+{
+    EVENT("(GLenum condition = 0x%X, GLbitfield flags = 0x%X)", condition, flags);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            gl::Program *programObject = context->getProgram(program);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return 0;
+        }
 
-            if (!programObject)
-            {
-                if (context->getShader(program))
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-                else
-                {
-                    return gl::error(GL_INVALID_VALUE);
-                }
-            }
+        if (condition != GL_SYNC_GPU_COMMANDS_COMPLETE)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return 0;
+        }
 
-            programObject->validate();
+        if (flags != 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return 0;
         }
+
+        return context->createFenceSync(condition);
     }
-    catch(std::bad_alloc&)
+
+    return NULL;
+}
+
+GLboolean __stdcall glIsSync(GLsync sync)
+{
+    EVENT("(GLsync sync = 0x%0.8p)", sync);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
+        }
+
+        return (context->getFenceSync(sync) != NULL);
     }
+
+    return GL_FALSE;
 }
 
-void __stdcall glVertexAttrib1f(GLuint index, GLfloat x)
+void __stdcall glDeleteSync(GLsync sync)
 {
-    EVENT("(GLuint index = %d, GLfloat x = %f)", index, x);
+    EVENT("(GLsync sync = 0x%0.8p)", sync);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        if (sync != static_cast<GLsync>(0) && !context->getFenceSync(sync))
         {
-            GLfloat vals[4] = { x, 0, 0, 1 };
-            context->setVertexAttrib(index, vals);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
+
+        context->deleteFenceSync(sync);
     }
-    catch(std::bad_alloc&)
+}
+
+GLenum __stdcall glClientWaitSync(GLsync sync, GLbitfield flags, GLuint64 timeout)
+{
+    EVENT("(GLsync sync = 0x%0.8p, GLbitfield flags = 0x%X, GLuint64 timeout = %llu)",
+          sync, flags, timeout);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_WAIT_FAILED;
+        }
+
+        if ((flags & ~(GL_SYNC_FLUSH_COMMANDS_BIT)) != 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return GL_WAIT_FAILED;
+        }
+
+        gl::FenceSync *fenceSync = context->getFenceSync(sync);
+
+        if (!fenceSync)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return GL_WAIT_FAILED;
+        }
+
+        return fenceSync->clientWait(flags, timeout);
     }
+
+    return GL_FALSE;
 }
 
-void __stdcall glVertexAttrib1fv(GLuint index, const GLfloat* values)
+void __stdcall glWaitSync(GLsync sync, GLbitfield flags, GLuint64 timeout)
 {
-    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+    EVENT("(GLsync sync = 0x%0.8p, GLbitfield flags = 0x%X, GLuint64 timeout = %llu)",
+          sync, flags, timeout);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (flags != 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-        if (context)
+        if (timeout != GL_TIMEOUT_IGNORED)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        gl::FenceSync *fenceSync = context->getFenceSync(sync);
+
+        if (!fenceSync)
         {
-            GLfloat vals[4] = { values[0], 0, 0, 1 };
-            context->setVertexAttrib(index, vals);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
+
+        fenceSync->serverWait();
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glGetInteger64v(GLenum pname, GLint64* params)
+{
+    EVENT("(GLenum pname = 0x%X, GLint64* params = 0x%0.8p)",
+          pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        GLenum nativeType;
+        unsigned int numParams = 0;
+        if (!ValidateStateQuery(context, pname, &nativeType, &numParams))
+        {
+            return;
+        }
+
+        if (nativeType == GL_INT_64_ANGLEX)
+        {
+            context->getInteger64v(pname, params);
+        }
+        else
+        {
+            CastStateValues(context, nativeType, pname, numParams, params);
+        }
     }
 }
 
-void __stdcall glVertexAttrib2f(GLuint index, GLfloat x, GLfloat y)
+void __stdcall glGetSynciv(GLsync sync, GLenum pname, GLsizei bufSize, GLsizei* length, GLint* values)
 {
-    EVENT("(GLuint index = %d, GLfloat x = %f, GLfloat y = %f)", index, x, y);
+    EVENT("(GLsync sync = 0x%0.8p, GLenum pname = 0x%X, GLsizei bufSize = %d, GLsizei* length = 0x%0.8p, GLint* values = 0x%0.8p)",
+          sync, pname, bufSize, length, values);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (bufSize < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-        if (context)
+        gl::FenceSync *fenceSync = context->getFenceSync(sync);
+
+        if (!fenceSync)
         {
-            GLfloat vals[4] = { x, y, 0, 1 };
-            context->setVertexAttrib(index, vals);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_OBJECT_TYPE:     values[0] = static_cast<GLint>(GL_SYNC_FENCE);              break;
+          case GL_SYNC_STATUS:     values[0] = static_cast<GLint>(fenceSync->getStatus());     break;
+          case GL_SYNC_CONDITION:  values[0] = static_cast<GLint>(fenceSync->getCondition());  break;
+          case GL_SYNC_FLAGS:      values[0] = 0;                                              break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glGetInteger64i_v(GLenum target, GLuint index, GLint64* data)
+{
+    EVENT("(GLenum target = 0x%X, GLuint index = %u, GLint64* data = 0x%0.8p)",
+          target, index, data);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        const gl::Caps &caps = context->getCaps();
+        switch (target)
+        {
+          case GL_TRANSFORM_FEEDBACK_BUFFER_START:
+          case GL_TRANSFORM_FEEDBACK_BUFFER_SIZE:
+          case GL_TRANSFORM_FEEDBACK_BUFFER_BINDING:
+            if (index >= caps.maxTransformFeedbackSeparateAttributes)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          case GL_UNIFORM_BUFFER_START:
+          case GL_UNIFORM_BUFFER_SIZE:
+          case GL_UNIFORM_BUFFER_BINDING:
+            if (index >= caps.maxUniformBufferBindings)
+            {
+                context->recordError(gl::Error(GL_INVALID_VALUE));
+                return;
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        if (!(context->getIndexedInteger64v(target, index, data)))
+        {
+            GLenum nativeType;
+            unsigned int numParams = 0;
+            if (!context->getIndexedQueryParameterInfo(target, &nativeType, &numParams))
+            {
+                context->recordError(gl::Error(GL_INVALID_ENUM));
+                return;
+            }
+
+            if (numParams == 0)
+                return; // it is known that pname is valid, but there are no parameters to return
+
+            if (nativeType == GL_INT)
+            {
+                GLint *intParams = new GLint[numParams];
+
+                context->getIndexedIntegerv(target, index, intParams);
+
+                for (unsigned int i = 0; i < numParams; ++i)
+                {
+                    data[i] = static_cast<GLint64>(intParams[i]);
+                }
+
+                delete [] intParams;
+            }
+            else
+            {
+                UNREACHABLE();
+            }
+        }
     }
 }
 
-void __stdcall glVertexAttrib2fv(GLuint index, const GLfloat* values)
+void __stdcall glGetBufferParameteri64v(GLenum target, GLenum pname, GLint64* params)
 {
-    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLint64* params = 0x%0.8p)",
+          target, pname, params);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        if (!gl::ValidBufferParameter(context, pname))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
+
+        if (!buffer)
         {
-            GLfloat vals[4] = { values[0], values[1], 0, 1 };
-            context->setVertexAttrib(index, vals);
+            // A null buffer means that "0" is bound to the requested buffer target
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_BUFFER_USAGE:
+            *params = static_cast<GLint64>(buffer->getUsage());
+            break;
+          case GL_BUFFER_SIZE:
+            *params = buffer->getSize();
+            break;
+          case GL_BUFFER_ACCESS_FLAGS:
+            *params = static_cast<GLint64>(buffer->getAccessFlags());
+            break;
+          case GL_BUFFER_MAPPED:
+            *params = static_cast<GLint64>(buffer->isMapped());
+            break;
+          case GL_BUFFER_MAP_OFFSET:
+            *params = buffer->getMapOffset();
+            break;
+          case GL_BUFFER_MAP_LENGTH:
+            *params = buffer->getMapLength();
+            break;
+          default: UNREACHABLE(); break;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glGenSamplers(GLsizei count, GLuint* samplers)
+{
+    EVENT("(GLsizei count = %d, GLuint* samplers = 0x%0.8p)", count, samplers);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (count < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        for (int i = 0; i < count; i++)
+        {
+            samplers[i] = context->createSampler();
+        }
     }
 }
 
-void __stdcall glVertexAttrib3f(GLuint index, GLfloat x, GLfloat y, GLfloat z)
+void __stdcall glDeleteSamplers(GLsizei count, const GLuint* samplers)
 {
-    EVENT("(GLuint index = %d, GLfloat x = %f, GLfloat y = %f, GLfloat z = %f)", index, x, y, z);
+    EVENT("(GLsizei count = %d, const GLuint* samplers = 0x%0.8p)", count, samplers);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (count < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-        if (context)
+        for (int i = 0; i < count; i++)
         {
-            GLfloat vals[4] = { x, y, z, 1 };
-            context->setVertexAttrib(index, vals);
+            context->deleteSampler(samplers[i]);
         }
     }
-    catch(std::bad_alloc&)
+}
+
+GLboolean __stdcall glIsSampler(GLuint sampler)
+{
+    EVENT("(GLuint sampler = %u)", sampler);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
+        }
+
+        return context->isSampler(sampler);
     }
+
+    return GL_FALSE;
 }
 
-void __stdcall glVertexAttrib3fv(GLuint index, const GLfloat* values)
+void __stdcall glBindSampler(GLuint unit, GLuint sampler)
 {
-    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+    EVENT("(GLuint unit = %u, GLuint sampler = %u)", unit, sampler);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (sampler != 0 && !context->isSampler(sampler))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-        if (context)
+        if (unit >= context->getCaps().maxCombinedTextureImageUnits)
         {
-            GLfloat vals[4] = { values[0], values[1], values[2], 1 };
-            context->setVertexAttrib(index, vals);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
+
+        context->bindSampler(unit, sampler);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glSamplerParameteri(GLuint sampler, GLenum pname, GLint param)
+{
+    EVENT("(GLuint sampler = %u, GLenum pname = 0x%X, GLint param = %d)", sampler, pname, param);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!gl::ValidateSamplerObjectParameter(context, pname))
+        {
+            return;
+        }
+
+        if (!gl::ValidateTexParamParameters(context, pname, param))
+        {
+            return;
+        }
+
+        if (!context->isSampler(sampler))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        context->samplerParameteri(sampler, pname, param);
     }
 }
 
-void __stdcall glVertexAttrib4f(GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w)
+void __stdcall glSamplerParameteriv(GLuint sampler, GLenum pname, const GLint* param)
 {
-    EVENT("(GLuint index = %d, GLfloat x = %f, GLfloat y = %f, GLfloat z = %f, GLfloat w = %f)", index, x, y, z, w);
+    glSamplerParameteri(sampler, pname, *param);
+}
 
-    try
+void __stdcall glSamplerParameterf(GLuint sampler, GLenum pname, GLfloat param)
+{
+    EVENT("(GLuint sampler = %u, GLenum pname = 0x%X, GLfloat param = %g)", sampler, pname, param);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (!gl::ValidateSamplerObjectParameter(context, pname))
+        {
+            return;
+        }
 
-        if (context)
+        if (!gl::ValidateTexParamParameters(context, pname, static_cast<GLint>(param)))
         {
-            GLfloat vals[4] = { x, y, z, w };
-            context->setVertexAttrib(index, vals);
+            return;
+        }
+
+        if (!context->isSampler(sampler))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
+
+        context->samplerParameterf(sampler, pname, param);
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glSamplerParameterfv(GLuint sampler, GLenum pname, const GLfloat* param)
+{
+    glSamplerParameterf(sampler, pname, *param);
+}
+
+void __stdcall glGetSamplerParameteriv(GLuint sampler, GLenum pname, GLint* params)
+{
+    EVENT("(GLuint sampler = %u, GLenum pname = 0x%X, GLint* params = 0x%0.8p)", sampler, pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!gl::ValidateSamplerObjectParameter(context, pname))
+        {
+            return;
+        }
+
+        if (!context->isSampler(sampler))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        *params = context->getSamplerParameteri(sampler, pname);
     }
 }
 
-void __stdcall glVertexAttrib4fv(GLuint index, const GLfloat* values)
+void __stdcall glGetSamplerParameterfv(GLuint sampler, GLenum pname, GLfloat* params)
 {
-    EVENT("(GLuint index = %d, const GLfloat* values = 0x%0.8p)", index, values);
+    EVENT("(GLuint sample = %ur, GLenum pname = 0x%X, GLfloat* params = 0x%0.8p)", sampler, pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!gl::ValidateSamplerObjectParameter(context, pname))
+        {
+            return;
+        }
+
+        if (!context->isSampler(sampler))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        *params = context->getSamplerParameterf(sampler, pname);
+    }
+}
 
-    try
+void __stdcall glVertexAttribDivisor(GLuint index, GLuint divisor)
+{
+    EVENT("(GLuint index = %u, GLuint divisor = %u)", index, divisor);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
         if (index >= gl::MAX_VERTEX_ATTRIBS)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        context->setVertexAttribDivisor(index, divisor);
+    }
+}
 
-        if (context)
+void __stdcall glBindTransformFeedback(GLenum target, GLuint id)
+{
+    EVENT("(GLenum target = 0x%X, GLuint id = %u)", target, id);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            context->setVertexAttrib(index, values);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        switch (target)
+        {
+          case GL_TRANSFORM_FEEDBACK:
+            {
+                // Cannot bind a transform feedback object if the current one is started and not paused (3.0.2 pg 85 section 2.14.1)
+                gl::TransformFeedback *curTransformFeedback = context->getState().getCurrentTransformFeedback();
+                if (curTransformFeedback && curTransformFeedback->isStarted() && !curTransformFeedback->isPaused())
+                {
+                    context->recordError(gl::Error(GL_INVALID_OPERATION));
+                    return;
+                }
+
+                // Cannot bind a transform feedback object that does not exist (3.0.2 pg 85 section 2.14.1)
+                if (context->getTransformFeedback(id) == NULL)
+                {
+                    context->recordError(gl::Error(GL_INVALID_OPERATION));
+                    return;
+                }
+
+                context->bindTransformFeedback(id);
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glDeleteTransformFeedbacks(GLsizei n, const GLuint* ids)
+{
+    EVENT("(GLsizei n = %d, const GLuint* ids = 0x%0.8p)", n, ids);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        for (int i = 0; i < n; i++)
+        {
+            context->deleteTransformFeedback(ids[i]);
+        }
     }
 }
 
-void __stdcall glVertexAttribDivisorANGLE(GLuint index, GLuint divisor)
+void __stdcall glGenTransformFeedbacks(GLsizei n, GLuint* ids)
 {
-    EVENT("(GLuint index = %d, GLuint divisor = %d)", index, divisor);
+    EVENT("(GLsizei n = %d, GLuint* ids = 0x%0.8p)", n, ids);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        for (int i = 0; i < n; i++)
         {
-            return gl::error(GL_INVALID_VALUE);
+            ids[i] = context->createTransformFeedback();
         }
+    }
+}
 
-        gl::Context *context = gl::getNonLostContext();
+GLboolean __stdcall glIsTransformFeedback(GLuint id)
+{
+    EVENT("(GLuint id = %u)", id);
 
-        if (context)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            context->setVertexAttribDivisor(index, divisor);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
         }
+
+        return ((context->getTransformFeedback(id) != NULL) ? GL_TRUE : GL_FALSE);
     }
-    catch(std::bad_alloc&)
+
+    return GL_FALSE;
+}
+
+void __stdcall glPauseTransformFeedback(void)
+{
+    EVENT("(void)");
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        gl::TransformFeedback *transformFeedback = context->getState().getCurrentTransformFeedback();
+        ASSERT(transformFeedback != NULL);
+
+        // Current transform feedback must be started and not paused in order to pause (3.0.2 pg 86)
+        if (!transformFeedback->isStarted() || transformFeedback->isPaused())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        transformFeedback->pause();
     }
 }
 
-void __stdcall glVertexAttribPointer(GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid* ptr)
+void __stdcall glResumeTransformFeedback(void)
 {
-    EVENT("(GLuint index = %d, GLint size = %d, GLenum type = 0x%X, "
-          "GLboolean normalized = %d, GLsizei stride = %d, const GLvoid* ptr = 0x%0.8p)",
-          index, size, type, normalized, stride, ptr);
+    EVENT("(void)");
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (index >= gl::MAX_VERTEX_ATTRIBS)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (size < 1 || size > 4)
+        gl::TransformFeedback *transformFeedback = context->getState().getCurrentTransformFeedback();
+        ASSERT(transformFeedback != NULL);
+
+        // Current transform feedback must be started and paused in order to resume (3.0.2 pg 86)
+        if (!transformFeedback->isStarted() || !transformFeedback->isPaused())
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        switch (type)
+        transformFeedback->resume();
+    }
+}
+
+void __stdcall glGetProgramBinary(GLuint program, GLsizei bufSize, GLsizei* length, GLenum* binaryFormat, GLvoid* binary)
+{
+    EVENT("(GLuint program = %u, GLsizei bufSize = %d, GLsizei* length = 0x%0.8p, GLenum* binaryFormat = 0x%0.8p, GLvoid* binary = 0x%0.8p)",
+          program, bufSize, length, binaryFormat, binary);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-          case GL_BYTE:
-          case GL_UNSIGNED_BYTE:
-          case GL_SHORT:
-          case GL_UNSIGNED_SHORT:
-          case GL_FIXED:
-          case GL_FLOAT:
-            break;
-          default:
-            return gl::error(GL_INVALID_ENUM);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (stride < 0)
+        // glGetProgramBinary
+        UNIMPLEMENTED();
+    }
+}
+
+void __stdcall glProgramBinary(GLuint program, GLenum binaryFormat, const GLvoid* binary, GLsizei length)
+{
+    EVENT("(GLuint program = %u, GLenum binaryFormat = 0x%X, const GLvoid* binary = 0x%0.8p, GLsizei length = %d)",
+          program, binaryFormat, binary, length);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        // glProgramBinary
+        UNIMPLEMENTED();
+    }
+}
 
-        if (context)
+void __stdcall glProgramParameteri(GLuint program, GLenum pname, GLint value)
+{
+    EVENT("(GLuint program = %u, GLenum pname = 0x%X, GLint value = %d)",
+          program, pname, value);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            context->setVertexAttribState(index, context->getArrayBuffer(), size, type, (normalized == GL_TRUE), stride, ptr);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
+
+        // glProgramParameteri
+        UNIMPLEMENTED();
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glInvalidateFramebuffer(GLenum target, GLsizei numAttachments, const GLenum* attachments)
+{
+    EVENT("(GLenum target = 0x%X, GLsizei numAttachments = %d, const GLenum* attachments = 0x%0.8p)",
+          target, numAttachments, attachments);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateInvalidateFramebufferParameters(context, target, numAttachments, attachments))
+        {
+            return;
+        }
+
+        gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+        if (framebuffer && framebuffer->completeness() == GL_FRAMEBUFFER_COMPLETE)
+        {
+            framebuffer->invalidate(context->getCaps(), numAttachments, attachments);
+        }
     }
 }
 
-void __stdcall glViewport(GLint x, GLint y, GLsizei width, GLsizei height)
+void __stdcall glInvalidateSubFramebuffer(GLenum target, GLsizei numAttachments, const GLenum* attachments, GLint x, GLint y, GLsizei width, GLsizei height)
 {
-    EVENT("(GLint x = %d, GLint y = %d, GLsizei width = %d, GLsizei height = %d)", x, y, width, height);
+    EVENT("(GLenum target = 0x%X, GLsizei numAttachments = %d, const GLenum* attachments = 0x%0.8p, GLint x = %d, "
+          "GLint y = %d, GLsizei width = %d, GLsizei height = %d)",
+          target, numAttachments, attachments, x, y, width, height);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        if (width < 0 || height < 0)
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (!ValidateInvalidateFramebufferParameters(context, target, numAttachments, attachments))
+        {
+            return;
+        }
 
-        if (context)
+        gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+        if (framebuffer && framebuffer->completeness() == GL_FRAMEBUFFER_COMPLETE)
         {
-            context->setViewportParams(x, y, width, height);
+            framebuffer->invalidateSub(context->getCaps(), numAttachments, attachments, x, y, width, height);
         }
     }
-    catch(std::bad_alloc&)
+}
+
+void __stdcall glTexStorage2D(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height)
+{
+    EVENT("(GLenum target = 0x%X, GLsizei levels = %d, GLenum internalformat = 0x%X, GLsizei width = %d, GLsizei height = %d)",
+          target, levels, internalformat, width, height);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateES3TexStorageParameters(context, target, levels, internalformat, width, height, 1))
+        {
+            return;
+        }
+
+        switch (target)
+        {
+          case GL_TEXTURE_2D:
+            {
+                gl::Texture2D *texture2d = context->getTexture2D();
+                texture2d->storage(levels, internalformat, width, height);
+            }
+            break;
+
+          case GL_TEXTURE_CUBE_MAP:
+            {
+                gl::TextureCubeMap *textureCube = context->getTextureCubeMap();
+                textureCube->storage(levels, internalformat, width);
+            }
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
     }
 }
 
-void __stdcall glBlitFramebufferANGLE(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
-                                      GLbitfield mask, GLenum filter)
+void __stdcall glTexStorage3D(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
 {
-    EVENT("(GLint srcX0 = %d, GLint srcY0 = %d, GLint srcX1 = %d, GLint srcY1 = %d, "
-          "GLint dstX0 = %d, GLint dstY0 = %d, GLint dstX1 = %d, GLint dstY1 = %d, "
-          "GLbitfield mask = 0x%X, GLenum filter = 0x%X)",
-          srcX0, srcY0, srcX1, srcX1, dstX0, dstY0, dstX1, dstY1, mask, filter);
+    EVENT("(GLenum target = 0x%X, GLsizei levels = %d, GLenum internalformat = 0x%X, GLsizei width = %d, "
+          "GLsizei height = %d, GLsizei depth = %d)",
+          target, levels, internalformat, width, height, depth);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        switch (filter)
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!ValidateES3TexStorageParameters(context, target, levels, internalformat, width, height, depth))
+        {
+            return;
+        }
+
+        switch (target)
         {
-          case GL_NEAREST:
+          case GL_TEXTURE_3D:
+            {
+                gl::Texture3D *texture3d = context->getTexture3D();
+                texture3d->storage(levels, internalformat, width, height, depth);
+            }
+            break;
+
+          case GL_TEXTURE_2D_ARRAY:
+            {
+                gl::Texture2DArray *texture2darray = context->getTexture2DArray();
+                texture2darray->storage(levels, internalformat, width, height, depth);
+            }
             break;
+
           default:
-            return gl::error(GL_INVALID_ENUM);
+            UNREACHABLE();
         }
+    }
+}
+
+void __stdcall glGetInternalformativ(GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint* params)
+{
+    EVENT("(GLenum target = 0x%X, GLenum internalformat = 0x%X, GLenum pname = 0x%X, GLsizei bufSize = %d, "
+          "GLint* params = 0x%0.8p)",
+          target, internalformat, pname, bufSize, params);
 
-        if ((mask & ~(GL_COLOR_BUFFER_BIT | GL_STENCIL_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)) != 0)
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (context->getClientVersion() < 3)
         {
-            return gl::error(GL_INVALID_VALUE);
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
 
-        if (srcX1 - srcX0 != dstX1 - dstX0 || srcY1 - srcY0 != dstY1 - dstY0)
+        const gl::TextureCaps &formatCaps = context->getTextureCaps().get(internalformat);
+        if (!formatCaps.renderable)
         {
-            ERR("Scaling and flipping in BlitFramebufferANGLE not supported by this implementation");
-            return gl::error(GL_INVALID_OPERATION);
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
 
-        gl::Context *context = gl::getNonLostContext();
+        if (target != GL_RENDERBUFFER)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-        if (context)
+        if (bufSize < 0)
         {
-            if (context->getReadFramebufferHandle() == context->getDrawFramebufferHandle())
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        switch (pname)
+        {
+          case GL_NUM_SAMPLE_COUNTS:
+            if (bufSize != 0)
             {
-                ERR("Blits with the same source and destination framebuffer are not supported by this implementation.");
-                return gl::error(GL_INVALID_OPERATION);
+                *params = formatCaps.sampleCounts.size();
             }
+            break;
 
-            context->blitFramebuffer(srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1, mask);
+          case GL_SAMPLES:
+            std::copy_n(formatCaps.sampleCounts.rbegin(), std::min<size_t>(bufSize, formatCaps.sampleCounts.size()), params);
+            break;
+
+          default:
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
         }
     }
-    catch(std::bad_alloc&)
+}
+
+// Extension functions
+
+void __stdcall glBlitFramebufferANGLE(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
+                                      GLbitfield mask, GLenum filter)
+{
+    EVENT("(GLint srcX0 = %d, GLint srcY0 = %d, GLint srcX1 = %d, GLint srcY1 = %d, "
+          "GLint dstX0 = %d, GLint dstY0 = %d, GLint dstX1 = %d, GLint dstY1 = %d, "
+          "GLbitfield mask = 0x%X, GLenum filter = 0x%X)",
+          srcX0, srcY0, srcX1, srcX1, dstX0, dstY0, dstX1, dstY1, mask, filter);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (!ValidateBlitFramebufferParameters(context, srcX0, srcY0, srcX1, srcY1,
+                                               dstX0, dstY0, dstX1, dstY1, mask, filter,
+                                               true))
+        {
+            return;
+        }
+
+        context->blitFramebuffer(srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1,
+                                 mask, filter);
     }
 }
 
@@ -6878,54 +8312,40 @@ void __stdcall glTexImage3DOES(GLenum target, GLint level, GLenum internalformat
           "GLenum format = 0x%X, GLenum type = 0x%x, const GLvoid* pixels = 0x%0.8p)",
           target, level, internalformat, width, height, depth, border, format, type, pixels);
 
-    try
-    {
-        UNIMPLEMENTED();   // FIXME
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
+    UNIMPLEMENTED();   // FIXME
 }
 
-void __stdcall glGetProgramBinaryOES(GLuint program, GLsizei bufSize, GLsizei *length, 
+void __stdcall glGetProgramBinaryOES(GLuint program, GLsizei bufSize, GLsizei *length,
                                      GLenum *binaryFormat, void *binary)
 {
     EVENT("(GLenum program = 0x%X, bufSize = %d, length = 0x%0.8p, binaryFormat = 0x%0.8p, binary = 0x%0.8p)",
           program, bufSize, length, binaryFormat, binary);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Program *programObject = context->getProgram(program);
 
-        if (context)
+        if (!programObject || !programObject->isLinked())
         {
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject || !programObject->isLinked())
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
-
-            gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            if (!programBinary)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        gl::ProgramBinary *programBinary = programObject->getProgramBinary();
 
-            if (!programBinary->save(binary, bufSize, length))
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+        if (!programBinary)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
 
-            *binaryFormat = GL_PROGRAM_BINARY_ANGLE;
+        if (!programBinary->save(binaryFormat, binary, bufSize, length))
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
     }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
 }
 
 void __stdcall glProgramBinaryOES(GLuint program, GLenum binaryFormat,
@@ -6934,30 +8354,24 @@ void __stdcall glProgramBinaryOES(GLuint program, GLenum binaryFormat,
     EVENT("(GLenum program = 0x%X, binaryFormat = 0x%x, binary = 0x%0.8p, length = %d)",
           program, binaryFormat, binary, length);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
-
-        if (context)
+        const std::vector<GLenum> &programBinaryFormats = context->getCaps().programBinaryFormats;
+        if (std::find(programBinaryFormats.begin(), programBinaryFormats.end(), binaryFormat) == programBinaryFormats.end())
         {
-            if (binaryFormat != GL_PROGRAM_BINARY_ANGLE)
-            {
-                return gl::error(GL_INVALID_ENUM);
-            }
-
-            gl::Program *programObject = context->getProgram(program);
-
-            if (!programObject)
-            {
-                return gl::error(GL_INVALID_OPERATION);
-            }
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
 
-            context->setProgramBinary(program, binary, length);
+        gl::Program *programObject = context->getProgram(program);
+        if (!programObject)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY);
+
+        context->setProgramBinary(program, binaryFormat, binary, length);
     }
 }
 
@@ -6965,57 +8379,310 @@ void __stdcall glDrawBuffersEXT(GLsizei n, const GLenum *bufs)
 {
     EVENT("(GLenum n = %d, bufs = 0x%0.8p)", n, bufs);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        if (n < 0 || static_cast<GLuint>(n) > context->getCaps().maxDrawBuffers)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
 
-        if (context)
+        if (context->getState().getDrawFramebuffer()->id() == 0)
         {
-            if (n < 0 || (unsigned int)n > context->getMaximumRenderTargets())
+            if (n != 1)
             {
-                return gl::error(GL_INVALID_VALUE);
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
 
-            if (context->getDrawFramebufferHandle() == 0)
+            if (bufs[0] != GL_NONE && bufs[0] != GL_BACK)
             {
-                if (n != 1)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
-
-                if (bufs[0] != GL_NONE && bufs[0] != GL_BACK)
-                {
-                    return gl::error(GL_INVALID_OPERATION);
-                }
+                context->recordError(gl::Error(GL_INVALID_OPERATION));
+                return;
             }
-            else
+        }
+        else
+        {
+            for (int colorAttachment = 0; colorAttachment < n; colorAttachment++)
             {
-                for (int colorAttachment = 0; colorAttachment < n; colorAttachment++)
+                const GLenum attachment = GL_COLOR_ATTACHMENT0_EXT + colorAttachment;
+                if (bufs[colorAttachment] != GL_NONE && bufs[colorAttachment] != attachment)
                 {
-                    const GLenum attachment = GL_COLOR_ATTACHMENT0_EXT + colorAttachment;
-                    if (bufs[colorAttachment] != GL_NONE && bufs[colorAttachment] != attachment)
-                    {
-                        return gl::error(GL_INVALID_OPERATION);
-                    }
+                    context->recordError(gl::Error(GL_INVALID_OPERATION));
+                    return;
                 }
             }
+        }
 
-            gl::Framebuffer *framebuffer = context->getDrawFramebuffer();
+        gl::Framebuffer *framebuffer = context->getState().getDrawFramebuffer();
 
-            for (int colorAttachment = 0; colorAttachment < n; colorAttachment++)
-            {
-                framebuffer->setDrawBufferState(colorAttachment, bufs[colorAttachment]);
-            }
+        for (unsigned int colorAttachment = 0; colorAttachment < static_cast<unsigned int>(n); colorAttachment++)
+        {
+            framebuffer->setDrawBufferState(colorAttachment, bufs[colorAttachment]);
+        }
 
-            for (int colorAttachment = n; colorAttachment < (int)context->getMaximumRenderTargets(); colorAttachment++)
-            {
-                framebuffer->setDrawBufferState(colorAttachment, GL_NONE);
-            }
+        for (unsigned int colorAttachment = n; colorAttachment < context->getCaps().maxDrawBuffers; colorAttachment++)
+        {
+            framebuffer->setDrawBufferState(colorAttachment, GL_NONE);
+        }
+    }
+}
+
+void __stdcall glGetBufferPointervOES(GLenum target, GLenum pname, void** params)
+{
+    EVENT("(GLenum target = 0x%X, GLenum pname = 0x%X, GLvoid** params = 0x%0.8p)", target, pname, params);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        if (pname != GL_BUFFER_MAP_POINTER)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
+
+        if (!buffer || !buffer->isMapped())
+        {
+            *params = NULL;
+        }
+        else
+        {
+            *params = buffer->getMapPointer();
+        }
+    }
+}
+
+void * __stdcall glMapBufferOES(GLenum target, GLenum access)
+{
+    EVENT("(GLenum target = 0x%X, GLbitfield access = 0x%X)", target, access);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return NULL;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
+
+        if (buffer == NULL)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        if (access != GL_WRITE_ONLY_OES)
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return NULL;
+        }
+
+        if (buffer->isMapped())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        gl::Error error = buffer->mapRange(0, buffer->getSize(), GL_MAP_WRITE_BIT);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return NULL;
         }
+
+        return buffer->getMapPointer();
     }
-    catch (std::bad_alloc&)
+
+    return NULL;
+}
+
+GLboolean __stdcall glUnmapBufferOES(GLenum target)
+{
+    EVENT("(GLenum target = 0x%X)", target);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        return gl::error(GL_OUT_OF_MEMORY);
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return GL_FALSE;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
+
+        if (buffer == NULL || !buffer->isMapped())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return GL_FALSE;
+        }
+
+        // TODO: detect if we had corruption. if so, throw an error and return false.
+
+        gl::Error error = buffer->unmap();
+        if (error.isError())
+        {
+            context->recordError(error);
+            return GL_FALSE;
+        }
+
+        return GL_TRUE;
+    }
+
+    return GL_FALSE;
+}
+
+void* __stdcall glMapBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access)
+{
+    EVENT("(GLenum target = 0x%X, GLintptr offset = %d, GLsizeiptr length = %d, GLbitfield access = 0x%X)",
+          target, offset, length, access);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return NULL;
+        }
+
+        if (offset < 0 || length < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return NULL;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
+
+        if (buffer == NULL)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        // Check for buffer overflow
+        size_t offsetSize = static_cast<size_t>(offset);
+        size_t lengthSize = static_cast<size_t>(length);
+
+        if (!rx::IsUnsignedAdditionSafe(offsetSize, lengthSize) ||
+            offsetSize + lengthSize > static_cast<size_t>(buffer->getSize()))
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return NULL;
+        }
+
+        // Check for invalid bits in the mask
+        GLbitfield allAccessBits = GL_MAP_READ_BIT |
+                                   GL_MAP_WRITE_BIT |
+                                   GL_MAP_INVALIDATE_RANGE_BIT |
+                                   GL_MAP_INVALIDATE_BUFFER_BIT |
+                                   GL_MAP_FLUSH_EXPLICIT_BIT |
+                                   GL_MAP_UNSYNCHRONIZED_BIT;
+
+        if (access & ~(allAccessBits))
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return NULL;
+        }
+
+        if (length == 0 || buffer->isMapped())
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        // Check for invalid bit combinations
+        if ((access & (GL_MAP_READ_BIT | GL_MAP_WRITE_BIT)) == 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        GLbitfield writeOnlyBits = GL_MAP_INVALIDATE_RANGE_BIT |
+                                   GL_MAP_INVALIDATE_BUFFER_BIT |
+                                   GL_MAP_UNSYNCHRONIZED_BIT;
+
+        if ((access & GL_MAP_READ_BIT) != 0 && (access & writeOnlyBits) != 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        if ((access & GL_MAP_WRITE_BIT) == 0 && (access & GL_MAP_FLUSH_EXPLICIT_BIT) != 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return NULL;
+        }
+
+        gl::Error error = buffer->mapRange(offset, length, access);
+        if (error.isError())
+        {
+            context->recordError(error);
+            return NULL;
+        }
+
+        return buffer->getMapPointer();
+    }
+
+    return NULL;
+}
+
+void __stdcall glFlushMappedBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length)
+{
+    EVENT("(GLenum target = 0x%X, GLintptr offset = %d, GLsizeiptr length = %d)", target, offset, length);
+
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
+    {
+        if (offset < 0 || length < 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        if (!gl::ValidBufferTarget(context, target))
+        {
+            context->recordError(gl::Error(GL_INVALID_ENUM));
+            return;
+        }
+
+        gl::Buffer *buffer = context->getState().getTargetBuffer(target);
+
+        if (buffer == NULL)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        if (!buffer->isMapped() || (buffer->getAccessFlags() & GL_MAP_FLUSH_EXPLICIT_BIT) == 0)
+        {
+            context->recordError(gl::Error(GL_INVALID_OPERATION));
+            return;
+        }
+
+        // Check for buffer overflow
+        size_t offsetSize = static_cast<size_t>(offset);
+        size_t lengthSize = static_cast<size_t>(length);
+
+        if (!rx::IsUnsignedAdditionSafe(offsetSize, lengthSize) ||
+            offsetSize + lengthSize > static_cast<size_t>(buffer->getMapLength()))
+        {
+            context->recordError(gl::Error(GL_INVALID_VALUE));
+            return;
+        }
+
+        // We do not currently support a non-trivial implementation of FlushMappedBufferRange
     }
 }
 
@@ -7057,7 +8724,12 @@ __eglMustCastToProperFunctionPointerType __stdcall glGetProcAddress(const char *
         {"glDrawArraysInstancedANGLE", (__eglMustCastToProperFunctionPointerType)glDrawArraysInstancedANGLE},
         {"glDrawElementsInstancedANGLE", (__eglMustCastToProperFunctionPointerType)glDrawElementsInstancedANGLE},
         {"glGetProgramBinaryOES", (__eglMustCastToProperFunctionPointerType)glGetProgramBinaryOES},
-        {"glProgramBinaryOES", (__eglMustCastToProperFunctionPointerType)glProgramBinaryOES},    };
+        {"glProgramBinaryOES", (__eglMustCastToProperFunctionPointerType)glProgramBinaryOES},
+        {"glGetBufferPointervOES", (__eglMustCastToProperFunctionPointerType)glGetBufferPointervOES},
+        {"glMapBufferOES", (__eglMustCastToProperFunctionPointerType)glMapBufferOES},
+        {"glUnmapBufferOES", (__eglMustCastToProperFunctionPointerType)glUnmapBufferOES},
+        {"glMapBufferRangeEXT", (__eglMustCastToProperFunctionPointerType)glMapBufferRangeEXT},
+        {"glFlushMappedBufferRangeEXT", (__eglMustCastToProperFunctionPointerType)glFlushMappedBufferRangeEXT},    };
 
     for (unsigned int ext = 0; ext < ArraySize(glExtensions); ext++)
     {
@@ -7077,28 +8749,18 @@ bool __stdcall glBindTexImage(egl::Surface *surface)
     EVENT("(egl::Surface* surface = 0x%0.8p)",
           surface);
 
-    try
+    gl::Context *context = gl::getNonLostContext();
+    if (context)
     {
-        gl::Context *context = gl::getNonLostContext();
+        gl::Texture2D *textureObject = context->getTexture2D();
+        ASSERT(textureObject != NULL);
 
-        if (context)
+        if (textureObject->isImmutable())
         {
-            gl::Texture2D *textureObject = context->getTexture2D();
-
-            if (textureObject->isImmutable())
-            {
-                return false;
-            }
-
-            if (textureObject)
-            {
-                textureObject->bindTexImage(surface);
-            }
+            return false;
         }
-    }
-    catch(std::bad_alloc&)
-    {
-        return gl::error(GL_OUT_OF_MEMORY, false);
+
+        textureObject->bindTexImage(surface);
     }
 
     return true;
diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2.def
index b8320c8f25..33557eb1c9 100644
--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2.def
+++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2.def
@@ -173,6 +173,117 @@ EXPORTS
     glProgramBinaryOES              @175
     glGetProgramBinaryOES           @176
     glDrawBuffersEXT                @179
+    glMapBufferOES                  @285
+    glUnmapBufferOES                @286
+    glGetBufferPointervOES          @287
+    glMapBufferRangeEXT             @288
+    glFlushMappedBufferRangeEXT     @289
+
+    ; GLES 3.0 Functions
+    glReadBuffer                    @180
+    glDrawRangeElements             @181
+    glTexImage3D                    @182
+    glTexSubImage3D                 @183
+    glCopyTexSubImage3D             @184
+    glCompressedTexImage3D          @185
+    glCompressedTexSubImage3D       @186
+    glGenQueries                    @187
+    glDeleteQueries                 @188
+    glIsQuery                       @189
+    glBeginQuery                    @190
+    glEndQuery                      @191
+    glGetQueryiv                    @192
+    glGetQueryObjectuiv             @193
+    glUnmapBuffer                   @194
+    glGetBufferPointerv             @195
+    glDrawBuffers                   @196
+    glUniformMatrix2x3fv            @197
+    glUniformMatrix3x2fv            @198
+    glUniformMatrix2x4fv            @199
+    glUniformMatrix4x2fv            @200
+    glUniformMatrix3x4fv            @201
+    glUniformMatrix4x3fv            @202
+    glBlitFramebuffer               @203
+    glRenderbufferStorageMultisample @204
+    glFramebufferTextureLayer       @205
+    glMapBufferRange                @206
+    glFlushMappedBufferRange        @207
+    glBindVertexArray               @208
+    glDeleteVertexArrays            @209
+    glGenVertexArrays               @210
+    glIsVertexArray                 @211
+    glGetIntegeri_v                 @212
+    glBeginTransformFeedback        @213
+    glEndTransformFeedback          @214
+    glBindBufferRange               @215
+    glBindBufferBase                @216
+    glTransformFeedbackVaryings     @217
+    glGetTransformFeedbackVarying   @218
+    glVertexAttribIPointer          @219
+    glGetVertexAttribIiv            @220
+    glGetVertexAttribIuiv           @221
+    glVertexAttribI4i               @222
+    glVertexAttribI4ui              @223
+    glVertexAttribI4iv              @224
+    glVertexAttribI4uiv             @225
+    glGetUniformuiv                 @226
+    glGetFragDataLocation           @227
+    glUniform1ui                    @228
+    glUniform2ui                    @229
+    glUniform3ui                    @230
+    glUniform4ui                    @231
+    glUniform1uiv                   @232
+    glUniform2uiv                   @233
+    glUniform3uiv                   @234
+    glUniform4uiv                   @235
+    glClearBufferiv                 @236
+    glClearBufferuiv                @237
+    glClearBufferfv                 @238
+    glClearBufferfi                 @239
+    glGetStringi                    @240
+    glCopyBufferSubData             @241
+    glGetUniformIndices             @242
+    glGetActiveUniformsiv           @243
+    glGetUniformBlockIndex          @244
+    glGetActiveUniformBlockiv       @245
+    glGetActiveUniformBlockName     @246
+    glUniformBlockBinding           @247
+    glDrawArraysInstanced           @248
+    glDrawElementsInstanced         @249
+    glFenceSync                     @250
+    glIsSync                        @251
+    glDeleteSync                    @252
+    glClientWaitSync                @253
+    glWaitSync                      @254
+    glGetInteger64v                 @255
+    glGetSynciv                     @256
+    glGetInteger64i_v               @257
+    glGetBufferParameteri64v        @258
+    glGenSamplers                   @259
+    glDeleteSamplers                @260
+    glIsSampler                     @261
+    glBindSampler                   @262
+    glSamplerParameteri             @263
+    glSamplerParameteriv            @264
+    glSamplerParameterf             @265
+    glSamplerParameterfv            @266
+    glGetSamplerParameteriv         @267
+    glGetSamplerParameterfv         @268
+    glVertexAttribDivisor           @269
+    glBindTransformFeedback         @270
+    glDeleteTransformFeedbacks      @271
+    glGenTransformFeedbacks         @272
+    glIsTransformFeedback           @273
+    glPauseTransformFeedback        @274
+    glResumeTransformFeedback       @275
+    glGetProgramBinary              @276
+    glProgramBinary                 @277
+    glProgramParameteri             @278
+    glInvalidateFramebuffer         @279
+    glInvalidateSubFramebuffer      @280
+    glTexStorage2D                  @281
+    glTexStorage3D                  @282
+    glGetInternalformativ           @283
 
     ; EGL dependencies
     glCreateContext                 @144 NONAME
@@ -183,6 +294,3 @@ EXPORTS
     glBindTexImage                  @158 NONAME
     glCreateRenderer                @177 NONAME
     glDestroyRenderer               @178 NONAME
-
-    ; Setting up TRACE macro callbacks
-    SetTraceFunctionPointers        @180
diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def
index ef44917d71..18ffcf6a0d 100644
--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def
+++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def
@@ -1,188 +1,296 @@
 LIBRARY libGLESv2
 EXPORTS
-	glActiveTexture@4                        @1
-	glAttachShader@8                         @2
-	glBindAttribLocation@12                  @3
-	glBindBuffer@8                           @4
-	glBindFramebuffer@8                      @5
-	glBindRenderbuffer@8                     @6
-	glBindTexture@8                          @7
-	glBlendColor@16                          @8
-	glBlendEquation@4                        @9
-	glBlendEquationSeparate@8                @10
-	glBlendFunc@8                            @11
-	glBlendFuncSeparate@16                   @12
-	glBufferData@16                          @13
-	glBufferSubData@16                       @14
-	glCheckFramebufferStatus@4               @15
-	glClear@4                                @16
-	glClearColor@16                          @17
-	glClearDepthf@4                          @18
-	glClearStencil@4                         @19
-	glColorMask@16                           @20
-	glCompileShader@4                        @21
-	glCompressedTexImage2D@32                @22
-	glCompressedTexSubImage2D@36             @23
-	glCopyTexImage2D@32                      @24
-	glCopyTexSubImage2D@32                   @25
-	glCreateProgram@0                        @26
-	glCreateShader@4                         @27
-	glCullFace@4                             @28
-	glDeleteBuffers@8                        @29
-	glDeleteFramebuffers@8                   @30
-	glDeleteProgram@4                        @32
-	glDeleteRenderbuffers@8                  @33
-	glDeleteShader@4                         @34
-	glDeleteTextures@8                       @31
-	glDepthFunc@4                            @36
-	glDepthMask@4                            @37
-	glDepthRangef@8                          @38
-	glDetachShader@8                         @35
-	glDisable@4                              @39
-	glDisableVertexAttribArray@4             @40
-	glDrawArrays@12                          @41
-	glDrawElements@16                        @42
-	glEnable@4                               @43
-	glEnableVertexAttribArray@4              @44
-	glFinish@0                               @45
-	glFlush@0                                @46
-	glFramebufferRenderbuffer@16             @47
-	glFramebufferTexture2D@20                @48
-	glFrontFace@4                            @49
-	glGenBuffers@8                           @50
-	glGenFramebuffers@8                      @52
-	glGenRenderbuffers@8                     @53
-	glGenTextures@8                          @54
-	glGenerateMipmap@4                       @51
-	glGetActiveAttrib@28                     @55
-	glGetActiveUniform@28                    @56
-	glGetAttachedShaders@16                  @57
-	glGetAttribLocation@8                    @58
-	glGetBooleanv@8                          @59
-	glGetBufferParameteriv@12                @60
-	glGetError@0                             @61
-	glGetFloatv@8                            @62
-	glGetFramebufferAttachmentParameteriv@16 @63
-	glGetIntegerv@8                          @64
-	glGetProgramInfoLog@16                   @66
-	glGetProgramiv@12                        @65
-	glGetRenderbufferParameteriv@12          @67
-	glGetShaderInfoLog@16                    @69
-	glGetShaderPrecisionFormat@16            @70
-	glGetShaderSource@16                     @71
-	glGetShaderiv@12                         @68
-	glGetString@4                            @72
-	glGetTexParameterfv@12                   @73
-	glGetTexParameteriv@12                   @74
-	glGetUniformLocation@8                   @77
-	glGetUniformfv@12                        @75
-	glGetUniformiv@12                        @76
-	glGetVertexAttribPointerv@12             @80
-	glGetVertexAttribfv@12                   @78
-	glGetVertexAttribiv@12                   @79
-	glHint@8                                 @81
-	glIsBuffer@4                             @82
-	glIsEnabled@4                            @83
-	glIsFramebuffer@4                        @84
-	glIsProgram@4                            @85
-	glIsRenderbuffer@4                       @86
-	glIsShader@4                             @87
-	glIsTexture@4                            @88
-	glLineWidth@4                            @89
-	glLinkProgram@4                          @90
-	glPixelStorei@8                          @91
-	glPolygonOffset@8                        @92
-	glReadPixels@28                          @93
-	glReleaseShaderCompiler@0                @94
-	glRenderbufferStorage@16                 @95
-	glSampleCoverage@8                       @96
-	glScissor@16                             @97
-	glShaderBinary@20                        @98
-	glShaderSource@16                        @99
-	glStencilFunc@12                         @100
-	glStencilFuncSeparate@16                 @101
-	glStencilMask@4                          @102
-	glStencilMaskSeparate@8                  @103
-	glStencilOp@12                           @104
-	glStencilOpSeparate@16                   @105
-	glTexImage2D@36                          @106
-	glTexParameterf@12                       @107
-	glTexParameterfv@12                      @108
-	glTexParameteri@12                       @109
-	glTexParameteriv@12                      @110
-	glTexSubImage2D@36                       @111
-	glUniform1f@8                            @112
-	glUniform1fv@12                          @113
-	glUniform1i@8                            @114
-	glUniform1iv@12                          @115
-	glUniform2f@12                           @116
-	glUniform2fv@12                          @117
-	glUniform2i@12                           @118
-	glUniform2iv@12                          @119
-	glUniform3f@16                           @120
-	glUniform3fv@12                          @121
-	glUniform3i@16                           @122
-	glUniform3iv@12                          @123
-	glUniform4f@20                           @124
-	glUniform4fv@12                          @125
-	glUniform4i@20                           @126
-	glUniform4iv@12                          @127
-	glUniformMatrix2fv@16                    @128
-	glUniformMatrix3fv@16                    @129
-	glUniformMatrix4fv@16                    @130
-	glUseProgram@4                           @131
-	glValidateProgram@4                      @132
-	glVertexAttrib1f@8                       @133
-	glVertexAttrib1fv@8                      @134
-	glVertexAttrib2f@12                      @135
-	glVertexAttrib2fv@8                      @136
-	glVertexAttrib3f@16                      @137
-	glVertexAttrib3fv@8                      @138
-	glVertexAttrib4f@20                      @139
-	glVertexAttrib4fv@8                      @140
-	glVertexAttribPointer@24                 @141
-	glViewport@16                            @142
+    glActiveTexture@4                        @1
+    glAttachShader@8                         @2
+    glBindAttribLocation@12                  @3
+    glBindBuffer@8                           @4
+    glBindFramebuffer@8                      @5
+    glBindRenderbuffer@8                     @6
+    glBindTexture@8                          @7
+    glBlendColor@16                          @8
+    glBlendEquation@4                        @9
+    glBlendEquationSeparate@8                @10
+    glBlendFunc@8                            @11
+    glBlendFuncSeparate@16                   @12
+    glBufferData@16                          @13
+    glBufferSubData@16                       @14
+    glCheckFramebufferStatus@4               @15
+    glClear@4                                @16
+    glClearColor@16                          @17
+    glClearDepthf@4                          @18
+    glClearStencil@4                         @19
+    glColorMask@16                           @20
+    glCompileShader@4                        @21
+    glCompressedTexImage2D@32                @22
+    glCompressedTexSubImage2D@36             @23
+    glCopyTexImage2D@32                      @24
+    glCopyTexSubImage2D@32                   @25
+    glCreateProgram@0                        @26
+    glCreateShader@4                         @27
+    glCullFace@4                             @28
+    glDeleteBuffers@8                        @29
+    glDeleteFramebuffers@8                   @30
+    glDeleteProgram@4                        @32
+    glDeleteRenderbuffers@8                  @33
+    glDeleteShader@4                         @34
+    glDeleteTextures@8                       @31
+    glDepthFunc@4                            @36
+    glDepthMask@4                            @37
+    glDepthRangef@8                          @38
+    glDetachShader@8                         @35
+    glDisable@4                              @39
+    glDisableVertexAttribArray@4             @40
+    glDrawArrays@12                          @41
+    glDrawElements@16                        @42
+    glEnable@4                               @43
+    glEnableVertexAttribArray@4              @44
+    glFinish@0                               @45
+    glFlush@0                                @46
+    glFramebufferRenderbuffer@16             @47
+    glFramebufferTexture2D@20                @48
+    glFrontFace@4                            @49
+    glGenBuffers@8                           @50
+    glGenFramebuffers@8                      @52
+    glGenRenderbuffers@8                     @53
+    glGenTextures@8                          @54
+    glGenerateMipmap@4                       @51
+    glGetActiveAttrib@28                     @55
+    glGetActiveUniform@28                    @56
+    glGetAttachedShaders@16                  @57
+    glGetAttribLocation@8                    @58
+    glGetBooleanv@8                          @59
+    glGetBufferParameteriv@12                @60
+    glGetError@0                             @61
+    glGetFloatv@8                            @62
+    glGetFramebufferAttachmentParameteriv@16 @63
+    glGetIntegerv@8                          @64
+    glGetProgramInfoLog@16                   @66
+    glGetProgramiv@12                        @65
+    glGetRenderbufferParameteriv@12          @67
+    glGetShaderInfoLog@16                    @69
+    glGetShaderPrecisionFormat@16            @70
+    glGetShaderSource@16                     @71
+    glGetShaderiv@12                         @68
+    glGetString@4                            @72
+    glGetTexParameterfv@12                   @73
+    glGetTexParameteriv@12                   @74
+    glGetUniformLocation@8                   @77
+    glGetUniformfv@12                        @75
+    glGetUniformiv@12                        @76
+    glGetVertexAttribPointerv@12             @80
+    glGetVertexAttribfv@12                   @78
+    glGetVertexAttribiv@12                   @79
+    glHint@8                                 @81
+    glIsBuffer@4                             @82
+    glIsEnabled@4                            @83
+    glIsFramebuffer@4                        @84
+    glIsProgram@4                            @85
+    glIsRenderbuffer@4                       @86
+    glIsShader@4                             @87
+    glIsTexture@4                            @88
+    glLineWidth@4                            @89
+    glLinkProgram@4                          @90
+    glPixelStorei@8                          @91
+    glPolygonOffset@8                        @92
+    glReadPixels@28                          @93
+    glReleaseShaderCompiler@0                @94
+    glRenderbufferStorage@16                 @95
+    glSampleCoverage@8                       @96
+    glScissor@16                             @97
+    glShaderBinary@20                        @98
+    glShaderSource@16                        @99
+    glStencilFunc@12                         @100
+    glStencilFuncSeparate@16                 @101
+    glStencilMask@4                          @102
+    glStencilMaskSeparate@8                  @103
+    glStencilOp@12                           @104
+    glStencilOpSeparate@16                   @105
+    glTexImage2D@36                          @106
+    glTexParameterf@12                       @107
+    glTexParameterfv@12                      @108
+    glTexParameteri@12                       @109
+    glTexParameteriv@12                      @110
+    glTexSubImage2D@36                       @111
+    glUniform1f@8                            @112
+    glUniform1fv@12                          @113
+    glUniform1i@8                            @114
+    glUniform1iv@12                          @115
+    glUniform2f@12                           @116
+    glUniform2fv@12                          @117
+    glUniform2i@12                           @118
+    glUniform2iv@12                          @119
+    glUniform3f@16                           @120
+    glUniform3fv@12                          @121
+    glUniform3i@16                           @122
+    glUniform3iv@12                          @123
+    glUniform4f@20                           @124
+    glUniform4fv@12                          @125
+    glUniform4i@20                           @126
+    glUniform4iv@12                          @127
+    glUniformMatrix2fv@16                    @128
+    glUniformMatrix3fv@16                    @129
+    glUniformMatrix4fv@16                    @130
+    glUseProgram@4                           @131
+    glValidateProgram@4                      @132
+    glVertexAttrib1f@8                       @133
+    glVertexAttrib1fv@8                      @134
+    glVertexAttrib2f@12                      @135
+    glVertexAttrib2fv@8                      @136
+    glVertexAttrib3f@16                      @137
+    glVertexAttrib3fv@8                      @138
+    glVertexAttrib4f@20                      @139
+    glVertexAttrib4fv@8                      @140
+    glVertexAttribPointer@24                 @141
+    glViewport@16                            @142
 
-	; Extensions
-	glTexImage3DOES@40                       @143
-	glBlitFramebufferANGLE@40                @149
-	glRenderbufferStorageMultisampleANGLE@20 @150
-	glDeleteFencesNV@8                       @151
-	glFinishFenceNV@4                        @152
-	glGenFencesNV@8                          @153
-	glGetFenceivNV@12                        @154
-	glIsFenceNV@4                            @155
-	glSetFenceNV@8                           @156
-	glTestFenceNV@4                          @157
-	glGetTranslatedShaderSourceANGLE@16      @159
-	glTexStorage2DEXT@20                     @160
-	glGetGraphicsResetStatusEXT@0            @161
-	glReadnPixelsEXT@32                      @162
-	glGetnUniformfvEXT@16                    @163
-	glGetnUniformivEXT@16                    @164
-	glGenQueriesEXT@8                        @165
-	glDeleteQueriesEXT@8                     @166
-	glIsQueryEXT@4                           @167
-	glBeginQueryEXT@8                        @168
-	glEndQueryEXT@4                          @169
-	glGetQueryivEXT@12                       @170
-	glGetQueryObjectuivEXT@12                @171
-	glVertexAttribDivisorANGLE@8             @172
-	glDrawArraysInstancedANGLE@16            @173
-	glDrawElementsInstancedANGLE@20          @174
-	glProgramBinaryOES@16                    @175
-	glGetProgramBinaryOES@20                 @176
-	glDrawBuffersEXT@8                       @179
+    ; Extensions
+    glTexImage3DOES@40                       @143
+    glBlitFramebufferANGLE@40                @149
+    glRenderbufferStorageMultisampleANGLE@20 @150
+    glDeleteFencesNV@8                       @151
+    glFinishFenceNV@4                        @152
+    glGenFencesNV@8                          @153
+    glGetFenceivNV@12                        @154
+    glIsFenceNV@4                            @155
+    glSetFenceNV@8                           @156
+    glTestFenceNV@4                          @157
+    glGetTranslatedShaderSourceANGLE@16      @159
+    glTexStorage2DEXT@20                     @160
+    glGetGraphicsResetStatusEXT@0            @161
+    glReadnPixelsEXT@32                      @162
+    glGetnUniformfvEXT@16                    @163
+    glGetnUniformivEXT@16                    @164
+    glGenQueriesEXT@8                        @165
+    glDeleteQueriesEXT@8                     @166
+    glIsQueryEXT@4                           @167
+    glBeginQueryEXT@8                        @168
+    glEndQueryEXT@4                          @169
+    glGetQueryivEXT@12                       @170
+    glGetQueryObjectuivEXT@12                @171
+    glVertexAttribDivisorANGLE@8             @172
+    glDrawArraysInstancedANGLE@16            @173
+    glDrawElementsInstancedANGLE@20          @174
+    glProgramBinaryOES@16                    @175
+    glGetProgramBinaryOES@20                 @176
+    glDrawBuffersEXT@8                       @179
+    glMapBufferOES@8                         @285
+    glUnmapBufferOES@4                       @286
+    glGetBufferPointervOES@12                @287
+    glMapBufferRangeEXT@16                   @288
+    glFlushMappedBufferRangeEXT@12           @289
 
-	; EGL dependencies
-	glCreateContext                          @144 NONAME
-	glDestroyContext                         @145 NONAME
-	glMakeCurrent                            @146 NONAME
-	glGetCurrentContext                      @147 NONAME
-	glGetProcAddress@4                       @148 NONAME
-	glBindTexImage@4                         @158 NONAME
-	glCreateRenderer                         @177 NONAME
-	glDestroyRenderer                        @178 NONAME
+    ; GLES 3.0 Functions
+    glReadBuffer@4                           @180
+    glDrawRangeElements@24                   @181
+    glTexImage3D@40                          @182
+    glTexSubImage3D@44                       @183
+    glCopyTexSubImage3D@36                   @184
+    glCompressedTexImage3D@36                @185
+    glCompressedTexSubImage3D@44             @186
+    glGenQueries@8                           @187
+    glDeleteQueries@8                        @188
+    glIsQuery@4                              @189
+    glBeginQuery@8                           @190
+    glEndQuery@4                             @191
+    glGetQueryiv@12                          @192
+    glGetQueryObjectuiv@12                   @193
+    glUnmapBuffer@4                          @194
+    glGetBufferPointerv@12                   @195
+    glDrawBuffers@8                          @196
+    glUniformMatrix2x3fv@16                  @197
+    glUniformMatrix3x2fv@16                  @198
+    glUniformMatrix2x4fv@16                  @199
+    glUniformMatrix4x2fv@16                  @200
+    glUniformMatrix3x4fv@16                  @201
+    glUniformMatrix4x3fv@16                  @202
+    glBlitFramebuffer@40                     @203
+    glRenderbufferStorageMultisample@20      @204
+    glFramebufferTextureLayer@20             @205
+    glMapBufferRange@16                      @206
+    glFlushMappedBufferRange@12              @207
+    glBindVertexArray@4                      @208
+    glDeleteVertexArrays@8                   @209
+    glGenVertexArrays@8                      @210
+    glIsVertexArray@4                        @211
+    glGetIntegeri_v@12                       @212
+    glBeginTransformFeedback@4               @213
+    glEndTransformFeedback@0                 @214
+    glBindBufferRange@20                     @215
+    glBindBufferBase@12                      @216
+    glTransformFeedbackVaryings@16           @217
+    glGetTransformFeedbackVarying@28         @218
+    glVertexAttribIPointer@20                @219
+    glGetVertexAttribIiv@12                  @220
+    glGetVertexAttribIuiv@12                 @221
+    glVertexAttribI4i@20                     @222
+    glVertexAttribI4ui@20                    @223
+    glVertexAttribI4iv@8                     @224
+    glVertexAttribI4uiv@8                    @225
+    glGetUniformuiv@12                       @226
+    glGetFragDataLocation@8                  @227
+    glUniform1ui@8                           @228
+    glUniform2ui@12                          @229
+    glUniform3ui@16                          @230
+    glUniform4ui@20                          @231
+    glUniform1uiv@12                         @232
+    glUniform2uiv@12                         @233
+    glUniform3uiv@12                         @234
+    glUniform4uiv@12                         @235
+    glClearBufferiv@12                       @236
+    glClearBufferuiv@12                      @237
+    glClearBufferfv@12                       @238
+    glClearBufferfi@16                       @239
+    glGetStringi@8                           @240
+    glCopyBufferSubData@20                   @241
+    glGetUniformIndices@16                   @242
+    glGetActiveUniformsiv@20                 @243
+    glGetUniformBlockIndex@8                 @244
+    glGetActiveUniformBlockiv@16             @245
+    glGetActiveUniformBlockName@20           @246
+    glUniformBlockBinding@12                 @247
+    glDrawArraysInstanced@16                 @248
+    glDrawElementsInstanced@20               @249
+    glFenceSync@8                            @250
+    glIsSync@4                               @251
+    glDeleteSync@4                           @252
+    glClientWaitSync@16                      @253
+    glWaitSync@16                            @254
+    glGetInteger64v@8                        @255
+    glGetSynciv@20                           @256
+    glGetInteger64i_v@12                     @257
+    glGetBufferParameteri64v@12              @258
+    glGenSamplers@8                          @259
+    glDeleteSamplers@8                       @260
+    glIsSampler@4                            @261
+    glBindSampler@8                          @262
+    glSamplerParameteri@12                   @263
+    glSamplerParameteriv@12                  @264
+    glSamplerParameterf@12                   @265
+    glSamplerParameterfv@12                  @266
+    glGetSamplerParameteriv@12               @267
+    glGetSamplerParameterfv@12               @268
+    glVertexAttribDivisor@8                  @269
+    glBindTransformFeedback@8                @270
+    glDeleteTransformFeedbacks@8             @271
+    glGenTransformFeedbacks@8                @272
+    glIsTransformFeedback@4                  @273
+    glPauseTransformFeedback@0               @274
+    glResumeTransformFeedback@0              @275
+    glGetProgramBinary@20                    @276
+    glProgramBinary@16                       @277
+    glProgramParameteri@12                   @278
+    glInvalidateFramebuffer@12               @279
+    glInvalidateSubFramebuffer@28            @280
+    glTexStorage2D@20                        @281
+    glTexStorage3D@24                        @282
+    glGetInternalformativ@20                 @283
 
-	; Setting up TRACE macro callbacks
-	SetTraceFunctionPointers@8               @180
+    ; EGL dependencies
+    glCreateContext                          @144 NONAME
+    glDestroyContext                         @145 NONAME
+    glMakeCurrent                            @146 NONAME
+    glGetCurrentContext                      @147 NONAME
+    glGetProcAddress@4                       @148 NONAME
+    glBindTexImage@4                         @158 NONAME
+    glCreateRenderer                         @177 NONAME
+    glDestroyRenderer                        @178 NONAME
diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def
index 3dd5683b5f..120371e013 100644
--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def
+++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def
@@ -173,6 +173,117 @@ EXPORTS
     glProgramBinaryOES              @175
     glGetProgramBinaryOES           @176
     glDrawBuffersEXT                @179
+    glMapBufferOES                  @285
+    glUnmapBufferOES                @286
+    glGetBufferPointervOES          @287
+    glMapBufferRangeEXT             @288
+    glFlushMappedBufferRangeEXT     @289
+
+    ; GLES 3.0 Functions
+    glReadBuffer                    @180
+    glDrawRangeElements             @181
+    glTexImage3D                    @182
+    glTexSubImage3D                 @183
+    glCopyTexSubImage3D             @184
+    glCompressedTexImage3D          @185
+    glCompressedTexSubImage3D       @186
+    glGenQueries                    @187
+    glDeleteQueries                 @188
+    glIsQuery                       @189
+    glBeginQuery                    @190
+    glEndQuery                      @191
+    glGetQueryiv                    @192
+    glGetQueryObjectuiv             @193
+    glUnmapBuffer                   @194
+    glGetBufferPointerv             @195
+    glDrawBuffers                   @196
+    glUniformMatrix2x3fv            @197
+    glUniformMatrix3x2fv            @198
+    glUniformMatrix2x4fv            @199
+    glUniformMatrix4x2fv            @200
+    glUniformMatrix3x4fv            @201
+    glUniformMatrix4x3fv            @202
+    glBlitFramebuffer               @203
+    glRenderbufferStorageMultisample @204
+    glFramebufferTextureLayer       @205
+    glMapBufferRange                @206
+    glFlushMappedBufferRange        @207
+    glBindVertexArray               @208
+    glDeleteVertexArrays            @209
+    glGenVertexArrays               @210
+    glIsVertexArray                 @211
+    glGetIntegeri_v                 @212
+    glBeginTransformFeedback        @213
+    glEndTransformFeedback          @214
+    glBindBufferRange               @215
+    glBindBufferBase                @216
+    glTransformFeedbackVaryings     @217
+    glGetTransformFeedbackVarying   @218
+    glVertexAttribIPointer          @219
+    glGetVertexAttribIiv            @220
+    glGetVertexAttribIuiv           @221
+    glVertexAttribI4i               @222
+    glVertexAttribI4ui              @223
+    glVertexAttribI4iv              @224
+    glVertexAttribI4uiv             @225
+    glGetUniformuiv                 @226
+    glGetFragDataLocation           @227
+    glUniform1ui                    @228
+    glUniform2ui                    @229
+    glUniform3ui                    @230
+    glUniform4ui                    @231
+    glUniform1uiv                   @232
+    glUniform2uiv                   @233
+    glUniform3uiv                   @234
+    glUniform4uiv                   @235
+    glClearBufferiv                 @236
+    glClearBufferuiv                @237
+    glClearBufferfv                 @238
+    glClearBufferfi                 @239
+    glGetStringi                    @240
+    glCopyBufferSubData             @241
+    glGetUniformIndices             @242
+    glGetActiveUniformsiv           @243
+    glGetUniformBlockIndex          @244
+    glGetActiveUniformBlockiv       @245
+    glGetActiveUniformBlockName     @246
+    glUniformBlockBinding           @247
+    glDrawArraysInstanced           @248
+    glDrawElementsInstanced         @249
+    glFenceSync                     @250
+    glIsSync                        @251
+    glDeleteSync                    @252
+    glClientWaitSync                @253
+    glWaitSync                      @254
+    glGetInteger64v                 @255
+    glGetSynciv                     @256
+    glGetInteger64i_v               @257
+    glGetBufferParameteri64v        @258
+    glGenSamplers                   @259
+    glDeleteSamplers                @260
+    glIsSampler                     @261
+    glBindSampler                   @262
+    glSamplerParameteri             @263
+    glSamplerParameteriv            @264
+    glSamplerParameterf             @265
+    glSamplerParameterfv            @266
+    glGetSamplerParameteriv         @267
+    glGetSamplerParameterfv         @268
+    glVertexAttribDivisor           @269
+    glBindTransformFeedback         @270
+    glDeleteTransformFeedbacks      @271
+    glGenTransformFeedbacks         @272
+    glIsTransformFeedback           @273
+    glPauseTransformFeedback        @274
+    glResumeTransformFeedback       @275
+    glGetProgramBinary              @276
+    glProgramBinary                 @277
+    glProgramParameteri             @278
+    glInvalidateFramebuffer         @279
+    glInvalidateSubFramebuffer      @280
+    glTexStorage2D                  @281
+    glTexStorage3D                  @282
+    glGetInternalformativ           @283
 
     ; EGL dependencies
     glCreateContext                 @144 NONAME
@@ -183,6 +294,3 @@ EXPORTS
     glBindTexImage                  @158 NONAME
     glCreateRenderer                @177 NONAME
     glDestroyRenderer               @178 NONAME
-
-    ; Setting up TRACE macro callbacks
-    SetTraceFunctionPointers        @180
diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def
index 6c8d3ed630..8c1306a703 100644
--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def
+++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def
@@ -1,188 +1,296 @@
 LIBRARY libGLESv2d
 EXPORTS
-	glActiveTexture@4                        @1
-	glAttachShader@8                         @2
-	glBindAttribLocation@12                  @3
-	glBindBuffer@8                           @4
-	glBindFramebuffer@8                      @5
-	glBindRenderbuffer@8                     @6
-	glBindTexture@8                          @7
-	glBlendColor@16                          @8
-	glBlendEquation@4                        @9
-	glBlendEquationSeparate@8                @10
-	glBlendFunc@8                            @11
-	glBlendFuncSeparate@16                   @12
-	glBufferData@16                          @13
-	glBufferSubData@16                       @14
-	glCheckFramebufferStatus@4               @15
-	glClear@4                                @16
-	glClearColor@16                          @17
-	glClearDepthf@4                          @18
-	glClearStencil@4                         @19
-	glColorMask@16                           @20
-	glCompileShader@4                        @21
-	glCompressedTexImage2D@32                @22
-	glCompressedTexSubImage2D@36             @23
-	glCopyTexImage2D@32                      @24
-	glCopyTexSubImage2D@32                   @25
-	glCreateProgram@0                        @26
-	glCreateShader@4                         @27
-	glCullFace@4                             @28
-	glDeleteBuffers@8                        @29
-	glDeleteFramebuffers@8                   @30
-	glDeleteProgram@4                        @32
-	glDeleteRenderbuffers@8                  @33
-	glDeleteShader@4                         @34
-	glDeleteTextures@8                       @31
-	glDepthFunc@4                            @36
-	glDepthMask@4                            @37
-	glDepthRangef@8                          @38
-	glDetachShader@8                         @35
-	glDisable@4                              @39
-	glDisableVertexAttribArray@4             @40
-	glDrawArrays@12                          @41
-	glDrawElements@16                        @42
-	glEnable@4                               @43
-	glEnableVertexAttribArray@4              @44
-	glFinish@0                               @45
-	glFlush@0                                @46
-	glFramebufferRenderbuffer@16             @47
-	glFramebufferTexture2D@20                @48
-	glFrontFace@4                            @49
-	glGenBuffers@8                           @50
-	glGenFramebuffers@8                      @52
-	glGenRenderbuffers@8                     @53
-	glGenTextures@8                          @54
-	glGenerateMipmap@4                       @51
-	glGetActiveAttrib@28                     @55
-	glGetActiveUniform@28                    @56
-	glGetAttachedShaders@16                  @57
-	glGetAttribLocation@8                    @58
-	glGetBooleanv@8                          @59
-	glGetBufferParameteriv@12                @60
-	glGetError@0                             @61
-	glGetFloatv@8                            @62
-	glGetFramebufferAttachmentParameteriv@16 @63
-	glGetIntegerv@8                          @64
-	glGetProgramInfoLog@16                   @66
-	glGetProgramiv@12                        @65
-	glGetRenderbufferParameteriv@12          @67
-	glGetShaderInfoLog@16                    @69
-	glGetShaderPrecisionFormat@16            @70
-	glGetShaderSource@16                     @71
-	glGetShaderiv@12                         @68
-	glGetString@4                            @72
-	glGetTexParameterfv@12                   @73
-	glGetTexParameteriv@12                   @74
-	glGetUniformLocation@8                   @77
-	glGetUniformfv@12                        @75
-	glGetUniformiv@12                        @76
-	glGetVertexAttribPointerv@12             @80
-	glGetVertexAttribfv@12                   @78
-	glGetVertexAttribiv@12                   @79
-	glHint@8                                 @81
-	glIsBuffer@4                             @82
-	glIsEnabled@4                            @83
-	glIsFramebuffer@4                        @84
-	glIsProgram@4                            @85
-	glIsRenderbuffer@4                       @86
-	glIsShader@4                             @87
-	glIsTexture@4                            @88
-	glLineWidth@4                            @89
-	glLinkProgram@4                          @90
-	glPixelStorei@8                          @91
-	glPolygonOffset@8                        @92
-	glReadPixels@28                          @93
-	glReleaseShaderCompiler@0                @94
-	glRenderbufferStorage@16                 @95
-	glSampleCoverage@8                       @96
-	glScissor@16                             @97
-	glShaderBinary@20                        @98
-	glShaderSource@16                        @99
-	glStencilFunc@12                         @100
-	glStencilFuncSeparate@16                 @101
-	glStencilMask@4                          @102
-	glStencilMaskSeparate@8                  @103
-	glStencilOp@12                           @104
-	glStencilOpSeparate@16                   @105
-	glTexImage2D@36                          @106
-	glTexParameterf@12                       @107
-	glTexParameterfv@12                      @108
-	glTexParameteri@12                       @109
-	glTexParameteriv@12                      @110
-	glTexSubImage2D@36                       @111
-	glUniform1f@8                            @112
-	glUniform1fv@12                          @113
-	glUniform1i@8                            @114
-	glUniform1iv@12                          @115
-	glUniform2f@12                           @116
-	glUniform2fv@12                          @117
-	glUniform2i@12                           @118
-	glUniform2iv@12                          @119
-	glUniform3f@16                           @120
-	glUniform3fv@12                          @121
-	glUniform3i@16                           @122
-	glUniform3iv@12                          @123
-	glUniform4f@20                           @124
-	glUniform4fv@12                          @125
-	glUniform4i@20                           @126
-	glUniform4iv@12                          @127
-	glUniformMatrix2fv@16                    @128
-	glUniformMatrix3fv@16                    @129
-	glUniformMatrix4fv@16                    @130
-	glUseProgram@4                           @131
-	glValidateProgram@4                      @132
-	glVertexAttrib1f@8                       @133
-	glVertexAttrib1fv@8                      @134
-	glVertexAttrib2f@12                      @135
-	glVertexAttrib2fv@8                      @136
-	glVertexAttrib3f@16                      @137
-	glVertexAttrib3fv@8                      @138
-	glVertexAttrib4f@20                      @139
-	glVertexAttrib4fv@8                      @140
-	glVertexAttribPointer@24                 @141
-	glViewport@16                            @142
+    glActiveTexture@4                        @1
+    glAttachShader@8                         @2
+    glBindAttribLocation@12                  @3
+    glBindBuffer@8                           @4
+    glBindFramebuffer@8                      @5
+    glBindRenderbuffer@8                     @6
+    glBindTexture@8                          @7
+    glBlendColor@16                          @8
+    glBlendEquation@4                        @9
+    glBlendEquationSeparate@8                @10
+    glBlendFunc@8                            @11
+    glBlendFuncSeparate@16                   @12
+    glBufferData@16                          @13
+    glBufferSubData@16                       @14
+    glCheckFramebufferStatus@4               @15
+    glClear@4                                @16
+    glClearColor@16                          @17
+    glClearDepthf@4                          @18
+    glClearStencil@4                         @19
+    glColorMask@16                           @20
+    glCompileShader@4                        @21
+    glCompressedTexImage2D@32                @22
+    glCompressedTexSubImage2D@36             @23
+    glCopyTexImage2D@32                      @24
+    glCopyTexSubImage2D@32                   @25
+    glCreateProgram@0                        @26
+    glCreateShader@4                         @27
+    glCullFace@4                             @28
+    glDeleteBuffers@8                        @29
+    glDeleteFramebuffers@8                   @30
+    glDeleteProgram@4                        @32
+    glDeleteRenderbuffers@8                  @33
+    glDeleteShader@4                         @34
+    glDeleteTextures@8                       @31
+    glDepthFunc@4                            @36
+    glDepthMask@4                            @37
+    glDepthRangef@8                          @38
+    glDetachShader@8                         @35
+    glDisable@4                              @39
+    glDisableVertexAttribArray@4             @40
+    glDrawArrays@12                          @41
+    glDrawElements@16                        @42
+    glEnable@4                               @43
+    glEnableVertexAttribArray@4              @44
+    glFinish@0                               @45
+    glFlush@0                                @46
+    glFramebufferRenderbuffer@16             @47
+    glFramebufferTexture2D@20                @48
+    glFrontFace@4                            @49
+    glGenBuffers@8                           @50
+    glGenFramebuffers@8                      @52
+    glGenRenderbuffers@8                     @53
+    glGenTextures@8                          @54
+    glGenerateMipmap@4                       @51
+    glGetActiveAttrib@28                     @55
+    glGetActiveUniform@28                    @56
+    glGetAttachedShaders@16                  @57
+    glGetAttribLocation@8                    @58
+    glGetBooleanv@8                          @59
+    glGetBufferParameteriv@12                @60
+    glGetError@0                             @61
+    glGetFloatv@8                            @62
+    glGetFramebufferAttachmentParameteriv@16 @63
+    glGetIntegerv@8                          @64
+    glGetProgramInfoLog@16                   @66
+    glGetProgramiv@12                        @65
+    glGetRenderbufferParameteriv@12          @67
+    glGetShaderInfoLog@16                    @69
+    glGetShaderPrecisionFormat@16            @70
+    glGetShaderSource@16                     @71
+    glGetShaderiv@12                         @68
+    glGetString@4                            @72
+    glGetTexParameterfv@12                   @73
+    glGetTexParameteriv@12                   @74
+    glGetUniformLocation@8                   @77
+    glGetUniformfv@12                        @75
+    glGetUniformiv@12                        @76
+    glGetVertexAttribPointerv@12             @80
+    glGetVertexAttribfv@12                   @78
+    glGetVertexAttribiv@12                   @79
+    glHint@8                                 @81
+    glIsBuffer@4                             @82
+    glIsEnabled@4                            @83
+    glIsFramebuffer@4                        @84
+    glIsProgram@4                            @85
+    glIsRenderbuffer@4                       @86
+    glIsShader@4                             @87
+    glIsTexture@4                            @88
+    glLineWidth@4                            @89
+    glLinkProgram@4                          @90
+    glPixelStorei@8                          @91
+    glPolygonOffset@8                        @92
+    glReadPixels@28                          @93
+    glReleaseShaderCompiler@0                @94
+    glRenderbufferStorage@16                 @95
+    glSampleCoverage@8                       @96
+    glScissor@16                             @97
+    glShaderBinary@20                        @98
+    glShaderSource@16                        @99
+    glStencilFunc@12                         @100
+    glStencilFuncSeparate@16                 @101
+    glStencilMask@4                          @102
+    glStencilMaskSeparate@8                  @103
+    glStencilOp@12                           @104
+    glStencilOpSeparate@16                   @105
+    glTexImage2D@36                          @106
+    glTexParameterf@12                       @107
+    glTexParameterfv@12                      @108
+    glTexParameteri@12                       @109
+    glTexParameteriv@12                      @110
+    glTexSubImage2D@36                       @111
+    glUniform1f@8                            @112
+    glUniform1fv@12                          @113
+    glUniform1i@8                            @114
+    glUniform1iv@12                          @115
+    glUniform2f@12                           @116
+    glUniform2fv@12                          @117
+    glUniform2i@12                           @118
+    glUniform2iv@12                          @119
+    glUniform3f@16                           @120
+    glUniform3fv@12                          @121
+    glUniform3i@16                           @122
+    glUniform3iv@12                          @123
+    glUniform4f@20                           @124
+    glUniform4fv@12                          @125
+    glUniform4i@20                           @126
+    glUniform4iv@12                          @127
+    glUniformMatrix2fv@16                    @128
+    glUniformMatrix3fv@16                    @129
+    glUniformMatrix4fv@16                    @130
+    glUseProgram@4                           @131
+    glValidateProgram@4                      @132
+    glVertexAttrib1f@8                       @133
+    glVertexAttrib1fv@8                      @134
+    glVertexAttrib2f@12                      @135
+    glVertexAttrib2fv@8                      @136
+    glVertexAttrib3f@16                      @137
+    glVertexAttrib3fv@8                      @138
+    glVertexAttrib4f@20                      @139
+    glVertexAttrib4fv@8                      @140
+    glVertexAttribPointer@24                 @141
+    glViewport@16                            @142
 
-	; Extensions
-	glTexImage3DOES@40                       @143
-	glBlitFramebufferANGLE@40                @149
-	glRenderbufferStorageMultisampleANGLE@20 @150
-	glDeleteFencesNV@8                       @151
-	glFinishFenceNV@4                        @152
-	glGenFencesNV@8                          @153
-	glGetFenceivNV@12                        @154
-	glIsFenceNV@4                            @155
-	glSetFenceNV@8                           @156
-	glTestFenceNV@4                          @157
-	glGetTranslatedShaderSourceANGLE@16      @159
-	glTexStorage2DEXT@20                     @160
-	glGetGraphicsResetStatusEXT@0            @161
-	glReadnPixelsEXT@32                      @162
-	glGetnUniformfvEXT@16                    @163
-	glGetnUniformivEXT@16                    @164
-	glGenQueriesEXT@8                        @165
-	glDeleteQueriesEXT@8                     @166
-	glIsQueryEXT@4                           @167
-	glBeginQueryEXT@8                        @168
-	glEndQueryEXT@4                          @169
-	glGetQueryivEXT@12                       @170
-	glGetQueryObjectuivEXT@12                @171
-	glVertexAttribDivisorANGLE@8             @172
-	glDrawArraysInstancedANGLE@16            @173
-	glDrawElementsInstancedANGLE@20          @174
-	glProgramBinaryOES@16                    @175
-	glGetProgramBinaryOES@20                 @176
-	glDrawBuffersEXT@8                       @179
+    ; Extensions
+    glTexImage3DOES@40                       @143
+    glBlitFramebufferANGLE@40                @149
+    glRenderbufferStorageMultisampleANGLE@20 @150
+    glDeleteFencesNV@8                       @151
+    glFinishFenceNV@4                        @152
+    glGenFencesNV@8                          @153
+    glGetFenceivNV@12                        @154
+    glIsFenceNV@4                            @155
+    glSetFenceNV@8                           @156
+    glTestFenceNV@4                          @157
+    glGetTranslatedShaderSourceANGLE@16      @159
+    glTexStorage2DEXT@20                     @160
+    glGetGraphicsResetStatusEXT@0            @161
+    glReadnPixelsEXT@32                      @162
+    glGetnUniformfvEXT@16                    @163
+    glGetnUniformivEXT@16                    @164
+    glGenQueriesEXT@8                        @165
+    glDeleteQueriesEXT@8                     @166
+    glIsQueryEXT@4                           @167
+    glBeginQueryEXT@8                        @168
+    glEndQueryEXT@4                          @169
+    glGetQueryivEXT@12                       @170
+    glGetQueryObjectuivEXT@12                @171
+    glVertexAttribDivisorANGLE@8             @172
+    glDrawArraysInstancedANGLE@16            @173
+    glDrawElementsInstancedANGLE@20          @174
+    glProgramBinaryOES@16                    @175
+    glGetProgramBinaryOES@20                 @176
+    glDrawBuffersEXT@8                       @179
+    glMapBufferOES@8                         @285
+    glUnmapBufferOES@4                       @286
+    glGetBufferPointervOES@12                @287
+    glMapBufferRangeEXT@16                   @288
+    glFlushMappedBufferRangeEXT@12           @289
 
-	; EGL dependencies
-	glCreateContext                          @144 NONAME
-	glDestroyContext                         @145 NONAME
-	glMakeCurrent                            @146 NONAME
-	glGetCurrentContext                      @147 NONAME
-	glGetProcAddress@4                       @148 NONAME
-	glBindTexImage@4                         @158 NONAME
-	glCreateRenderer                         @177 NONAME
-	glDestroyRenderer                        @178 NONAME
+    ; GLES 3.0 Functions
+    glReadBuffer@4                           @180
+    glDrawRangeElements@24                   @181
+    glTexImage3D@40                          @182
+    glTexSubImage3D@44                       @183
+    glCopyTexSubImage3D@36                   @184
+    glCompressedTexImage3D@36                @185
+    glCompressedTexSubImage3D@44             @186
+    glGenQueries@8                           @187
+    glDeleteQueries@8                        @188
+    glIsQuery@4                              @189
+    glBeginQuery@8                           @190
+    glEndQuery@4                             @191
+    glGetQueryiv@12                          @192
+    glGetQueryObjectuiv@12                   @193
+    glUnmapBuffer@4                          @194
+    glGetBufferPointerv@12                   @195
+    glDrawBuffers@8                          @196
+    glUniformMatrix2x3fv@16                  @197
+    glUniformMatrix3x2fv@16                  @198
+    glUniformMatrix2x4fv@16                  @199
+    glUniformMatrix4x2fv@16                  @200
+    glUniformMatrix3x4fv@16                  @201
+    glUniformMatrix4x3fv@16                  @202
+    glBlitFramebuffer@40                     @203
+    glRenderbufferStorageMultisample@20      @204
+    glFramebufferTextureLayer@20             @205
+    glMapBufferRange@16                      @206
+    glFlushMappedBufferRange@12              @207
+    glBindVertexArray@4                      @208
+    glDeleteVertexArrays@8                   @209
+    glGenVertexArrays@8                      @210
+    glIsVertexArray@4                        @211
+    glGetIntegeri_v@12                       @212
+    glBeginTransformFeedback@4               @213
+    glEndTransformFeedback@0                 @214
+    glBindBufferRange@20                     @215
+    glBindBufferBase@12                      @216
+    glTransformFeedbackVaryings@16           @217
+    glGetTransformFeedbackVarying@28         @218
+    glVertexAttribIPointer@20                @219
+    glGetVertexAttribIiv@12                  @220
+    glGetVertexAttribIuiv@12                 @221
+    glVertexAttribI4i@20                     @222
+    glVertexAttribI4ui@20                    @223
+    glVertexAttribI4iv@8                     @224
+    glVertexAttribI4uiv@8                    @225
+    glGetUniformuiv@12                       @226
+    glGetFragDataLocation@8                  @227
+    glUniform1ui@8                           @228
+    glUniform2ui@12                          @229
+    glUniform3ui@16                          @230
+    glUniform4ui@20                          @231
+    glUniform1uiv@12                         @232
+    glUniform2uiv@12                         @233
+    glUniform3uiv@12                         @234
+    glUniform4uiv@12                         @235
+    glClearBufferiv@12                       @236
+    glClearBufferuiv@12                      @237
+    glClearBufferfv@12                       @238
+    glClearBufferfi@16                       @239
+    glGetStringi@8                           @240
+    glCopyBufferSubData@20                   @241
+    glGetUniformIndices@16                   @242
+    glGetActiveUniformsiv@20                 @243
+    glGetUniformBlockIndex@8                 @244
+    glGetActiveUniformBlockiv@16             @245
+    glGetActiveUniformBlockName@20           @246
+    glUniformBlockBinding@12                 @247
+    glDrawArraysInstanced@16                 @248
+    glDrawElementsInstanced@20               @249
+    glFenceSync@8                            @250
+    glIsSync@4                               @251
+    glDeleteSync@4                           @252
+    glClientWaitSync@16                      @253
+    glWaitSync@16                            @254
+    glGetInteger64v@8                        @255
+    glGetSynciv@20                           @256
+    glGetInteger64i_v@12                     @257
+    glGetBufferParameteri64v@12              @258
+    glGenSamplers@8                          @259
+    glDeleteSamplers@8                       @260
+    glIsSampler@4                            @261
+    glBindSampler@8                          @262
+    glSamplerParameteri@12                   @263
+    glSamplerParameteriv@12                  @264
+    glSamplerParameterf@12                   @265
+    glSamplerParameterfv@12                  @266
+    glGetSamplerParameteriv@12               @267
+    glGetSamplerParameterfv@12               @268
+    glVertexAttribDivisor@8                  @269
+    glBindTransformFeedback@8                @270
+    glDeleteTransformFeedbacks@8             @271
+    glGenTransformFeedbacks@8                @272
+    glIsTransformFeedback@4                  @273
+    glPauseTransformFeedback@0               @274
+    glResumeTransformFeedback@0              @275
+    glGetProgramBinary@20                    @276
+    glProgramBinary@16                       @277
+    glProgramParameteri@12                   @278
+    glInvalidateFramebuffer@12               @279
+    glInvalidateSubFramebuffer@28            @280
+    glTexStorage2D@20                        @281
+    glTexStorage3D@24                        @282
+    glGetInternalformativ@20                 @283
 
-	; Setting up TRACE macro callbacks
-	SetTraceFunctionPointers@8               @180
+    ; EGL dependencies
+    glCreateContext                          @144 NONAME
+    glDestroyContext                         @145 NONAME
+    glMakeCurrent                            @146 NONAME
+    glGetCurrentContext                      @147 NONAME
+    glGetProcAddress@4                       @148 NONAME
+    glBindTexImage@4                         @158 NONAME
+    glCreateRenderer                         @177 NONAME
+    glDestroyRenderer                        @178 NONAME
diff --git a/src/3rdparty/angle/src/libGLESv2/main.cpp b/src/3rdparty/angle/src/libGLESv2/main.cpp
index e52799438d..51447e273a 100644
--- a/src/3rdparty/angle/src/libGLESv2/main.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/main.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -8,60 +7,56 @@
 // main.cpp: DLL entry point and management of thread-local data.
 
 #include "libGLESv2/main.h"
-
 #include "libGLESv2/Context.h"
 
-#if !defined(ANGLE_OS_WINRT)
-static DWORD currentTLS = TLS_OUT_OF_INDEXES;
-#else
-static __declspec(thread) void *currentTLS = 0;
+#include "common/tls.h"
+
+#if defined(ANGLE_PLATFORM_WINRT)
+__declspec(thread)
 #endif
+static TLSIndex currentTLS = TLS_OUT_OF_INDEXES;
 
 namespace gl
 {
 
 Current *AllocateCurrent()
 {
-#if !defined(ANGLE_OS_WINRT)
-    Current *current = (Current*)LocalAlloc(LPTR, sizeof(Current));
-#else
-    currentTLS = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(Current));
-    Current *current = (Current*)currentTLS;
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (currentTLS == TLS_OUT_OF_INDEXES)
+    {
+        currentTLS = CreateTLSIndex();
+    }
 #endif
-
-    if (!current)
+    ASSERT(currentTLS != TLS_OUT_OF_INDEXES);
+    if (currentTLS == TLS_OUT_OF_INDEXES)
     {
-        ERR("Could not allocate thread local storage.");
         return NULL;
     }
 
-#if !defined(ANGLE_OS_WINRT)
-    ASSERT(currentTLS != TLS_OUT_OF_INDEXES);
-    TlsSetValue(currentTLS, current);
-#endif
-
+    Current *current = new Current();
     current->context = NULL;
     current->display = NULL;
 
+    if (!SetTLSValue(currentTLS, current))
+    {
+        ERR("Could not set thread local storage.");
+        return NULL;
+    }
+
     return current;
 }
 
 void DeallocateCurrent()
 {
-#if !defined(ANGLE_OS_WINRT)
-    void *current = TlsGetValue(currentTLS);
-
-    if (current)
+#if defined(ANGLE_PLATFORM_WINRT)
+    if (currentTLS == TLS_OUT_OF_INDEXES)
     {
-        LocalFree((HLOCAL)current);
-    }
-#else
-    if (currentTLS)
-    {
-        HeapFree(GetProcessHeap(), 0, currentTLS);
-        currentTLS = 0;
+        return;
     }
 #endif
+    Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
+    SafeDelete(current);
+    SetTLSValue(currentTLS, NULL);
 }
 
 }
@@ -74,16 +69,16 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
     {
       case DLL_PROCESS_ATTACH:
         {
-#if !defined(ANGLE_OS_WINRT)
-            currentTLS = TlsAlloc();
-
+#if defined(ANGLE_PLATFORM_WINRT) // On WinRT, don't handle TLS from DllMain
+            return DisableThreadLibraryCalls(instance);
+#endif
+            currentTLS = CreateTLSIndex();
             if (currentTLS == TLS_OUT_OF_INDEXES)
             {
                 return FALSE;
             }
-#endif
         }
-        // Fall throught to initialize index
+        // Fall through to initialize index
       case DLL_THREAD_ATTACH:
         {
             gl::AllocateCurrent();
@@ -96,9 +91,9 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
         break;
       case DLL_PROCESS_DETACH:
         {
+#if !defined(ANGLE_PLATFORM_WINRT)
             gl::DeallocateCurrent();
-#if !defined(ANGLE_OS_WINRT)
-            TlsFree(currentTLS);
+            DestroyTLSIndex(currentTLS);
 #endif
         }
         break;
@@ -117,20 +112,16 @@ namespace gl
 Current *GetCurrentData()
 {
 #ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-#if !defined(ANGLE_OS_WINRT)
-    Current *current = (Current*)TlsGetValue(currentTLS);
-#else
-    Current *current = (Current*)currentTLS;
-#endif
-#else
-    // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
-    static Current s_current = { 0, 0 };
-    Current *current = &s_current;
-#endif
+    Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
 
     // ANGLE issue 488: when the dll is loaded after thread initialization,
     // thread local storage (current) might not exist yet.
     return (current ? current : AllocateCurrent());
+#else
+    // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
+    static Current current = { 0, 0 };
+    return &current;
+#endif
 }
 
 void makeCurrent(Context *context, egl::Display *display, egl::Surface *surface)
@@ -156,7 +147,7 @@ Context *getContext()
 Context *getNonLostContext()
 {
     Context *context = getContext();
-    
+
     if (context)
     {
         if (context->isContextLost())
@@ -183,33 +174,26 @@ egl::Display *getDisplay()
 void error(GLenum errorCode)
 {
     gl::Context *context = glGetCurrentContext();
+    context->recordError(Error(errorCode));
 
-    if (context)
+    switch (errorCode)
     {
-        switch (errorCode)
-        {
-          case GL_INVALID_ENUM:
-            context->recordInvalidEnum();
-            TRACE("\t! Error generated: invalid enum\n");
-            break;
-          case GL_INVALID_VALUE:
-            context->recordInvalidValue();
-            TRACE("\t! Error generated: invalid value\n");
-            break;
-          case GL_INVALID_OPERATION:
-            context->recordInvalidOperation();
-            TRACE("\t! Error generated: invalid operation\n");
-            break;
-          case GL_OUT_OF_MEMORY:
-            context->recordOutOfMemory();
-            TRACE("\t! Error generated: out of memory\n");
-            break;
-          case GL_INVALID_FRAMEBUFFER_OPERATION:
-            context->recordInvalidFramebufferOperation();
-            TRACE("\t! Error generated: invalid framebuffer operation\n");
-            break;
-          default: UNREACHABLE();
-        }
+      case GL_INVALID_ENUM:
+        TRACE("\t! Error generated: invalid enum\n");
+        break;
+      case GL_INVALID_VALUE:
+        TRACE("\t! Error generated: invalid value\n");
+        break;
+      case GL_INVALID_OPERATION:
+        TRACE("\t! Error generated: invalid operation\n");
+        break;
+      case GL_OUT_OF_MEMORY:
+        TRACE("\t! Error generated: out of memory\n");
+        break;
+      case GL_INVALID_FRAMEBUFFER_OPERATION:
+        TRACE("\t! Error generated: invalid framebuffer operation\n");
+        break;
+      default: UNREACHABLE();
     }
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/main.h b/src/3rdparty/angle/src/libGLESv2/main.h
index 69465c9bbf..c30ad3375c 100644
--- a/src/3rdparty/angle/src/libGLESv2/main.h
+++ b/src/3rdparty/angle/src/libGLESv2/main.h
@@ -11,6 +11,13 @@
 
 #include "common/debug.h"
 
+#include <GLES2/gl2.h>
+#include <EGL/egl.h>
+
+#ifndef Sleep
+#define Sleep(ms) WaitForSingleObjectEx(GetCurrentThread(), ms, FALSE)
+#endif
+
 namespace egl
 {
 class Display;
@@ -53,11 +60,11 @@ class Renderer;
 extern "C"
 {
 // Exported functions for use by EGL
-gl::Context *glCreateContext(const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess);
+gl::Context *glCreateContext(int clientVersion, const gl::Context *shareContext, rx::Renderer *renderer, bool notifyResets, bool robustAccess);
 void glDestroyContext(gl::Context *context);
 void glMakeCurrent(gl::Context *context, egl::Display *display, egl::Surface *surface);
 gl::Context *glGetCurrentContext();
-rx::Renderer *glCreateRenderer(egl::Display *display, EGLNativeDisplayType displayId);
+rx::Renderer *glCreateRenderer(egl::Display *display, EGLNativeDisplayType nativeDisplay, EGLint requestedDisplayType);
 void glDestroyRenderer(rx::Renderer *renderer);
 
 __eglMustCastToProperFunctionPointerType __stdcall glGetProcAddress(const char *procname);
diff --git a/src/3rdparty/angle/src/libGLESv2/mathutil.h b/src/3rdparty/angle/src/libGLESv2/mathutil.h
deleted file mode 100644
index 6474b66745..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/mathutil.h
+++ /dev/null
@@ -1,162 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// mathutil.h: Math and bit manipulation functions.
-
-#ifndef LIBGLESV2_MATHUTIL_H_
-#define LIBGLESV2_MATHUTIL_H_
-
-#include <intrin.h>
-
-#include "common/debug.h"
-
-namespace gl
-{
-struct Vector4
-{
-    Vector4() {}
-    Vector4(float x, float y, float z, float w) : x(x), y(y), z(z), w(w) {}
-
-    float x;
-    float y;
-    float z;
-    float w;
-};
-
-inline bool isPow2(int x)
-{
-    return (x & (x - 1)) == 0 && (x != 0);
-}
-
-inline int log2(int x)
-{
-    int r = 0;
-    while ((x >> r) > 1) r++;
-    return r;
-}
-
-inline unsigned int ceilPow2(unsigned int x)
-{
-    if (x != 0) x--;
-    x |= x >> 1;
-    x |= x >> 2;
-    x |= x >> 4;
-    x |= x >> 8;
-    x |= x >> 16;
-    x++;
-
-    return x;
-}
-
-template<typename T, typename MIN, typename MAX>
-inline T clamp(T x, MIN min, MAX max)
-{
-    // Since NaNs fail all comparison tests, a NaN value will default to min
-    return x > min ? (x > max ? max : x) : min;
-}
-
-inline float clamp01(float x)
-{
-    return clamp(x, 0.0f, 1.0f);
-}
-
-template<const int n>
-inline unsigned int unorm(float x)
-{
-    const unsigned int max = 0xFFFFFFFF >> (32 - n);
-
-    if (x > 1)
-    {
-        return max;
-    }
-    else if (x < 0)
-    {
-        return 0;
-    }
-    else
-    {
-        return (unsigned int)(max * x + 0.5f);
-    }
-}
-
-inline bool supportsSSE2()
-{
-    static bool checked = false;
-    static bool supports = false;
-
-    if (checked)
-    {
-        return supports;
-    }
-
-#if defined(_M_IX86) || defined(_M_AMD64) // ARM doesn't provide __cpuid()
-    int info[4];
-    __cpuid(info, 0);
-    
-    if (info[0] >= 1)
-    {
-        __cpuid(info, 1);
-
-        supports = (info[3] >> 26) & 1;
-    }
-#endif
-
-    checked = true;
-
-    return supports;
-}
-
-inline unsigned short float32ToFloat16(float fp32)
-{
-    unsigned int fp32i = (unsigned int&)fp32;
-    unsigned int sign = (fp32i & 0x80000000) >> 16;
-    unsigned int abs = fp32i & 0x7FFFFFFF;
-
-    if(abs > 0x47FFEFFF)   // Infinity
-    {
-        return sign | 0x7FFF;
-    }
-    else if(abs < 0x38800000)   // Denormal
-    {
-        unsigned int mantissa = (abs & 0x007FFFFF) | 0x00800000;   
-        int e = 113 - (abs >> 23);
-
-        if(e < 24)
-        {
-            abs = mantissa >> e;
-        }
-        else
-        {
-            abs = 0;
-        }
-
-        return sign | (abs + 0x00000FFF + ((abs >> 13) & 1)) >> 13;
-    }
-    else
-    {
-        return sign | (abs + 0xC8000000 + 0x00000FFF + ((abs >> 13) & 1)) >> 13;
-    }
-}
-
-float float16ToFloat32(unsigned short h);
-
-}
-
-namespace rx
-{
-
-struct Range
-{
-    Range() {}
-    Range(int lo, int hi) : start(lo), end(hi) { ASSERT(lo <= hi); }
-
-    int start;
-    int end;
-};
-
-}
-
-#endif   // LIBGLESV2_MATHUTIL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/precompiled.cpp b/src/3rdparty/angle/src/libGLESv2/precompiled.cpp
deleted file mode 100644
index 2621cd6ce3..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/precompiled.cpp
+++ /dev/null
@@ -1,9 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// precompiled.cpp: Precompiled header source file for libGLESv2.
-
-#include "precompiled.h"
diff --git a/src/3rdparty/angle/src/libGLESv2/precompiled.h b/src/3rdparty/angle/src/libGLESv2/precompiled.h
deleted file mode 100644
index 2ff09f531e..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/precompiled.h
+++ /dev/null
@@ -1,87 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// precompiled.h: Precompiled header file for libGLESv2.
-
-#define GL_APICALL
-#include <GLES2/gl2.h>
-#include <GLES2/gl2ext.h>
-
-#define EGLAPI
-#include <EGL/egl.h>
-
-#include <assert.h>
-#include <cstddef>
-#include <float.h>
-#include <intrin.h>
-#include <math.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <algorithm> // for std::min and std::max
-#include <limits>
-#include <map>
-#include <set>
-#include <sstream>
-#include <string>
-#include <unordered_map>
-#include <vector>
-
-#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
-#  define ANGLE_OS_WINRT
-#  if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
-#    define ANGLE_OS_WINPHONE
-#  endif
-#endif
-
-#if defined(ANGLE_ENABLE_D3D9)
-#  include <d3d9.h>
-#endif
-#if defined(ANGLE_ENABLE_D3D11)
-#  if !defined(ANGLE_OS_WINRT)
-#    include <d3d11.h>
-#  else
-#    include <d3d11_1.h>
-#    define Sleep(x) WaitForSingleObjectEx(GetCurrentThread(), x, FALSE)
-#    define GetVersion() WINVER
-#    define LoadLibrary(x) LoadPackagedLibrary(x, NULL)
-#  endif
-#  include <dxgi.h>
-#endif
-#if !defined(ANGLE_OS_WINPHONE)
-#  include <d3dcompiler.h>
-#endif
-
-#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL0
-#define D3DCOMPILE_OPTIMIZATION_LEVEL0 (1 << 14)
-#endif
-#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL1
-#define D3DCOMPILE_OPTIMIZATION_LEVEL1 0
-#endif
-#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL2
-#define D3DCOMPILE_OPTIMIZATION_LEVEL2 ((1 << 14) | (1 << 15))
-#endif
-#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL3
-#define D3DCOMPILE_OPTIMIZATION_LEVEL3 (1 << 15)
-#endif
-#ifndef D3DCOMPILE_DEBUG
-#define D3DCOMPILE_DEBUG (1 << 0)
-#endif
-#ifndef D3DCOMPILE_SKIP_OPTIMIZATION
-#define D3DCOMPILE_SKIP_OPTIMIZATION (1 << 2)
-#endif
-#ifndef D3DCOMPILE_AVOID_FLOW_CONTROL
-#define D3DCOMPILE_AVOID_FLOW_CONTROL (1 << 9)
-#endif
-#ifndef D3DCOMPILE_PREFER_FLOW_CONTROL
-#define D3DCOMPILE_PREFER_FLOW_CONTROL (1 << 10)
-#endif
-
-#ifdef _MSC_VER
-#include <hash_map>
-#endif
diff --git a/src/3rdparty/angle/src/libGLESv2/queryconversions.cpp b/src/3rdparty/angle/src/libGLESv2/queryconversions.cpp
new file mode 100644
index 0000000000..7245902c51
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/queryconversions.cpp
@@ -0,0 +1,147 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// queryconversions.cpp: Implementation of state query cast conversions
+
+#include "libGLESv2/Context.h"
+#include "common/utilities.h"
+
+namespace gl
+{
+
+// Helper class for converting a GL type to a GLenum:
+// We can't use CastStateValueEnum generally, because of GLboolean + GLubyte overlap.
+// We restrict our use to CastStateValue, where it eliminates duplicate parameters.
+
+template <typename GLType>
+struct CastStateValueEnum { static GLenum mEnumForType; };
+
+template <> GLenum CastStateValueEnum<GLint>::mEnumForType      = GL_INT;
+template <> GLenum CastStateValueEnum<GLuint>::mEnumForType     = GL_UNSIGNED_INT;
+template <> GLenum CastStateValueEnum<GLboolean>::mEnumForType  = GL_BOOL;
+template <> GLenum CastStateValueEnum<GLint64>::mEnumForType    = GL_INT_64_ANGLEX;
+template <> GLenum CastStateValueEnum<GLfloat>::mEnumForType    = GL_FLOAT;
+
+template <typename QueryT, typename NativeT>
+QueryT CastStateValueToInt(GLenum pname, NativeT value)
+{
+    GLenum queryType = CastStateValueEnum<QueryT>::mEnumForType;
+    GLenum nativeType = CastStateValueEnum<NativeT>::mEnumForType;
+
+    if (nativeType == GL_FLOAT)
+    {
+        // RGBA color values and DepthRangeF values are converted to integer using Equation 2.4 from Table 4.5
+        if (pname == GL_DEPTH_RANGE || pname == GL_COLOR_CLEAR_VALUE || pname == GL_DEPTH_CLEAR_VALUE || pname == GL_BLEND_COLOR)
+        {
+            return static_cast<QueryT>((static_cast<GLfloat>(0xFFFFFFFF) * value - 1.0f) / 2.0f);
+        }
+        else
+        {
+            return gl::iround<QueryT>(value);
+        }
+    }
+
+    // Clamp 64-bit int values when casting to int
+    if (nativeType == GL_INT_64_ANGLEX && queryType == GL_INT)
+    {
+        GLint64 minIntValue = static_cast<GLint64>(std::numeric_limits<GLint>::min());
+        GLint64 maxIntValue = static_cast<GLint64>(std::numeric_limits<GLint>::max());
+        GLint64 clampedValue = std::max(std::min(static_cast<GLint64>(value), maxIntValue), minIntValue);
+        return static_cast<QueryT>(clampedValue);
+    }
+
+    return static_cast<QueryT>(value);
+}
+
+template <typename QueryT, typename NativeT>
+QueryT CastStateValue(GLenum pname, NativeT value)
+{
+    GLenum queryType = CastStateValueEnum<QueryT>::mEnumForType;
+
+    switch (queryType)
+    {
+      case GL_INT:              return CastStateValueToInt<QueryT, NativeT>(pname, value);
+      case GL_INT_64_ANGLEX:    return CastStateValueToInt<QueryT, NativeT>(pname, value);
+      case GL_FLOAT:            return static_cast<QueryT>(value);
+      case GL_BOOL:             return (value == static_cast<NativeT>(0) ? GL_FALSE : GL_TRUE);
+      default: UNREACHABLE();   return 0;
+    }
+}
+
+template <typename QueryT>
+void CastStateValues(Context *context, GLenum nativeType, GLenum pname,
+                     unsigned int numParams, QueryT *outParams)
+{
+    if (nativeType == GL_INT)
+    {
+        GLint *intParams = NULL;
+        intParams = new GLint[numParams];
+
+        context->getIntegerv(pname, intParams);
+
+        for (unsigned int i = 0; i < numParams; ++i)
+        {
+            outParams[i] = CastStateValue<QueryT>(pname, intParams[i]);
+        }
+
+        delete [] intParams;
+    }
+    else if (nativeType == GL_BOOL)
+    {
+        GLboolean *boolParams = NULL;
+        boolParams = new GLboolean[numParams];
+
+        context->getBooleanv(pname, boolParams);
+
+        for (unsigned int i = 0; i < numParams; ++i)
+        {
+            outParams[i] = (boolParams[i] == GL_FALSE ? static_cast<QueryT>(0) : static_cast<QueryT>(1));
+        }
+
+        delete [] boolParams;
+    }
+    else if (nativeType == GL_FLOAT)
+    {
+        GLfloat *floatParams = NULL;
+        floatParams = new GLfloat[numParams];
+
+        context->getFloatv(pname, floatParams);
+
+        for (unsigned int i = 0; i < numParams; ++i)
+        {
+            outParams[i] = CastStateValue<QueryT>(pname, floatParams[i]);
+        }
+
+        delete [] floatParams;
+    }
+    else if (nativeType == GL_INT_64_ANGLEX)
+    {
+        GLint64 *int64Params = NULL;
+        int64Params = new GLint64[numParams];
+
+        context->getInteger64v(pname, int64Params);
+
+        for (unsigned int i = 0; i < numParams; ++i)
+        {
+            outParams[i] = CastStateValue<QueryT>(pname, int64Params[i]);
+        }
+
+        delete [] int64Params;
+    }
+    else UNREACHABLE();
+}
+
+// Explicit template instantiation (how we export template functions in different files)
+// The calls below will make CastStateValues successfully link with the GL state query types
+// The GL state query API types are: bool, int, uint, float, int64
+
+template void CastStateValues<GLboolean>(Context *, GLenum, GLenum, unsigned int, GLboolean *);
+template void CastStateValues<GLint>(Context *, GLenum, GLenum, unsigned int, GLint *);
+template void CastStateValues<GLuint>(Context *, GLenum, GLenum, unsigned int, GLuint *);
+template void CastStateValues<GLfloat>(Context *, GLenum, GLenum, unsigned int, GLfloat *);
+template void CastStateValues<GLint64>(Context *, GLenum, GLenum, unsigned int, GLint64 *);
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/queryconversions.h b/src/3rdparty/angle/src/libGLESv2/queryconversions.h
new file mode 100644
index 0000000000..da7047f730
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/queryconversions.h
@@ -0,0 +1,17 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// queryconversions.h: Declaration of state query cast conversions
+
+namespace gl
+{
+
+// The GL state query API types are: bool, int, uint, float, int64
+template <typename QueryT>
+void CastStateValues(Context *context, GLenum nativeType, GLenum pname,
+                     unsigned int numParams, QueryT *outParams);
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/BufferImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/BufferImpl.h
new file mode 100644
index 0000000000..f0b5f02227
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/BufferImpl.h
@@ -0,0 +1,34 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// BufferImpl.h: Defines the abstract rx::BufferImpl class.
+
+#ifndef LIBGLESV2_RENDERER_BUFFERIMPL_H_
+#define LIBGLESV2_RENDERER_BUFFERIMPL_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/Buffer.h"
+
+namespace rx
+{
+
+class BufferImpl
+{
+  public:
+    virtual ~BufferImpl() { }
+
+    virtual gl::Error setData(const void* data, size_t size, GLenum usage) = 0;
+    virtual void *getData() = 0;
+    virtual gl::Error setSubData(const void* data, size_t size, size_t offset) = 0;
+    virtual gl::Error copySubData(BufferImpl* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size) = 0;
+    virtual gl::Error map(size_t offset, size_t length, GLbitfield access, GLvoid **mapPtr) = 0;
+    virtual gl::Error unmap() = 0;
+    virtual void markTransformFeedbackUsage() = 0;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_BUFFERIMPL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/BufferStorage.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/BufferStorage.cpp
deleted file mode 100644
index a49b7bab84..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/BufferStorage.cpp
+++ /dev/null
@@ -1,40 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// BufferStorage.cpp Defines the abstract BufferStorage class.
-
-#include "libGLESv2/renderer/BufferStorage.h"
-
-namespace rx
-{
-
-unsigned int BufferStorage::mNextSerial = 1;
-
-BufferStorage::BufferStorage()
-{
-    updateSerial();
-}
-
-BufferStorage::~BufferStorage()
-{
-}
-
-unsigned int BufferStorage::getSerial() const
-{
-    return mSerial;
-}
-
-void BufferStorage::updateSerial()
-{
-    mSerial = mNextSerial++;
-}
-
-void BufferStorage::markBufferUsage()
-{
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/BufferStorage.h b/src/3rdparty/angle/src/libGLESv2/renderer/BufferStorage.h
deleted file mode 100644
index ace1a11bae..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/BufferStorage.h
+++ /dev/null
@@ -1,44 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// BufferStorage.h Defines the abstract BufferStorage class.
-
-#ifndef LIBGLESV2_RENDERER_BUFFERSTORAGE_H_
-#define LIBGLESV2_RENDERER_BUFFERSTORAGE_H_
-
-#include "common/angleutils.h"
-
-namespace rx
-{
-
-class BufferStorage
-{
-  public:
-    BufferStorage();
-    virtual ~BufferStorage();
-
-    // The data returned is only guaranteed valid until next non-const method.
-    virtual void *getData() = 0;
-    virtual void setData(const void* data, unsigned int size, unsigned int offset) = 0;
-    virtual void clear() = 0;
-    virtual unsigned int getSize() const = 0;
-    virtual bool supportsDirectBinding() const = 0;
-    virtual void markBufferUsage();
-    unsigned int getSerial() const;
-
-  protected:
-    void updateSerial();
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(BufferStorage);
-
-    unsigned int mSerial;
-    static unsigned int mNextSerial;
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_BUFFERSTORAGE_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/FenceImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/FenceImpl.h
index d7f2102a2e..d54e6becd3 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/FenceImpl.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/FenceImpl.h
@@ -17,27 +17,16 @@ namespace rx
 class FenceImpl
 {
   public:
-    FenceImpl() : mStatus(GL_FALSE), mCondition(GL_NONE) { };
+    FenceImpl() { };
     virtual ~FenceImpl() { };
 
-    virtual GLboolean isFence() = 0;
-    virtual void setFence(GLenum condition) = 0;
-    virtual GLboolean testFence() = 0;
-    virtual void finishFence() = 0;
-    virtual void getFenceiv(GLenum pname, GLint *params) = 0;
-
-  protected:
-    void setStatus(GLboolean status) { mStatus = status; }
-    GLboolean getStatus() const { return mStatus; }
-
-    void setCondition(GLuint condition) { mCondition = condition; }
-    GLuint getCondition() const { return mCondition; }
+    virtual bool isSet() const = 0;
+    virtual void set() = 0;
+    virtual bool test(bool flushCommandBuffer) = 0;
+    virtual bool hasError() const = 0;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(FenceImpl);
-
-    GLboolean mStatus;
-    GLenum mCondition;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Image.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Image.cpp
index 57239ef74f..370b086233 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/Image.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Image.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -18,531 +17,12 @@ Image::Image()
 {
     mWidth = 0; 
     mHeight = 0;
+    mDepth = 0;
     mInternalFormat = GL_NONE;
     mActualFormat = GL_NONE;
-}
-
-void Image::loadAlphaDataToBGRA(GLsizei width, GLsizei height,
-                                int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-    
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = 0;
-            dest[4 * x + 1] = 0;
-            dest[4 * x + 2] = 0;
-            dest[4 * x + 3] = source[x];
-        }
-    }
-}
-
-void Image::loadAlphaDataToNative(GLsizei width, GLsizei height,
-                                  int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        memcpy(dest, source, width);
-    }
-}
-
-void Image::loadAlphaFloatDataToRGBA(GLsizei width, GLsizei height,
-                                     int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = 0;
-            dest[4 * x + 1] = 0;
-            dest[4 * x + 2] = 0;
-            dest[4 * x + 3] = source[x];
-        }
-    }
-}
-
-void Image::loadAlphaHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                         int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned short *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned short*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = 0;
-            dest[4 * x + 1] = 0;
-            dest[4 * x + 2] = 0;
-            dest[4 * x + 3] = source[x];
-        }
-    }
-}
-
-void Image::loadLuminanceDataToNativeOrBGRA(GLsizei width, GLsizei height,
-                                            int inputPitch, const void *input, size_t outputPitch, void *output, bool native)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-
-        if (!native)   // BGRA8 destination format
-        {
-            for (int x = 0; x < width; x++)
-            {
-                dest[4 * x + 0] = source[x];
-                dest[4 * x + 1] = source[x];
-                dest[4 * x + 2] = source[x];
-                dest[4 * x + 3] = 0xFF;
-            }
-        }
-        else   // L8 destination format
-        {
-            memcpy(dest, source, width);
-        }
-    }
-}
-
-void Image::loadLuminanceFloatDataToRGBA(GLsizei width, GLsizei height,
-                                         int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[x];
-            dest[4 * x + 1] = source[x];
-            dest[4 * x + 2] = source[x];
-            dest[4 * x + 3] = 1.0f;
-        }
-    }
-}
-
-void Image::loadLuminanceFloatDataToRGB(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[3 * x + 0] = source[x];
-            dest[3 * x + 1] = source[x];
-            dest[3 * x + 2] = source[x];
-        }
-    }
-}
-
-void Image::loadLuminanceHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                             int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned short *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned short*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[x];
-            dest[4 * x + 1] = source[x];
-            dest[4 * x + 2] = source[x];
-            dest[4 * x + 3] = 0x3C00; // SEEEEEMMMMMMMMMM, S = 0, E = 15, M = 0: 16bit flpt representation of 1
-        }
-    }
-}
-
-void Image::loadLuminanceAlphaDataToNativeOrBGRA(GLsizei width, GLsizei height,
-                                                 int inputPitch, const void *input, size_t outputPitch, void *output, bool native)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        
-        if (!native)   // BGRA8 destination format
-        {
-            for (int x = 0; x < width; x++)
-            {
-                dest[4 * x + 0] = source[2*x+0];
-                dest[4 * x + 1] = source[2*x+0];
-                dest[4 * x + 2] = source[2*x+0];
-                dest[4 * x + 3] = source[2*x+1];
-            }
-        }
-        else
-        {
-            memcpy(dest, source, width * 2);
-        }
-    }
-}
-
-void Image::loadLuminanceAlphaFloatDataToRGBA(GLsizei width, GLsizei height,
-                                              int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[2*x+0];
-            dest[4 * x + 1] = source[2*x+0];
-            dest[4 * x + 2] = source[2*x+0];
-            dest[4 * x + 3] = source[2*x+1];
-        }
-    }
-}
-
-void Image::loadLuminanceAlphaHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                                  int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned short *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned short*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[2*x+0];
-            dest[4 * x + 1] = source[2*x+0];
-            dest[4 * x + 2] = source[2*x+0];
-            dest[4 * x + 3] = source[2*x+1];
-        }
-    }
-}
-
-void Image::loadRGBUByteDataToBGRX(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[x * 3 + 2];
-            dest[4 * x + 1] = source[x * 3 + 1];
-            dest[4 * x + 2] = source[x * 3 + 0];
-            dest[4 * x + 3] = 0xFF;
-        }
-    }
-}
-
-void Image::loadRGBUByteDataToRGBA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[x * 3 + 0];
-            dest[4 * x + 1] = source[x * 3 + 1];
-            dest[4 * x + 2] = source[x * 3 + 2];
-            dest[4 * x + 3] = 0xFF;
-        }
-    }
-}
-
-void Image::loadRGB565DataToBGRA(GLsizei width, GLsizei height,
-                                 int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            unsigned short rgba = source[x];
-            dest[4 * x + 0] = ((rgba & 0x001F) << 3) | ((rgba & 0x001F) >> 2);
-            dest[4 * x + 1] = ((rgba & 0x07E0) >> 3) | ((rgba & 0x07E0) >> 9);
-            dest[4 * x + 2] = ((rgba & 0xF800) >> 8) | ((rgba & 0xF800) >> 13);
-            dest[4 * x + 3] = 0xFF;
-        }
-    }
-}
-
-void Image::loadRGB565DataToRGBA(GLsizei width, GLsizei height,
-                                 int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            unsigned short rgba = source[x];
-            dest[4 * x + 0] = ((rgba & 0xF800) >> 8) | ((rgba & 0xF800) >> 13);
-            dest[4 * x + 1] = ((rgba & 0x07E0) >> 3) | ((rgba & 0x07E0) >> 9);
-            dest[4 * x + 2] = ((rgba & 0x001F) << 3) | ((rgba & 0x001F) >> 2);
-            dest[4 * x + 3] = 0xFF;
-        }
-    }
-}
-
-void Image::loadRGBFloatDataToRGBA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[x * 3 + 0];
-            dest[4 * x + 1] = source[x * 3 + 1];
-            dest[4 * x + 2] = source[x * 3 + 2];
-            dest[4 * x + 3] = 1.0f;
-        }
-    }
-}
-
-void Image::loadRGBFloatDataToNative(GLsizei width, GLsizei height,
-                                     int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        memcpy(dest, source, width * 12);
-    }
-}
-
-void Image::loadRGBHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned short *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned short*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        for (int x = 0; x < width; x++)
-        {
-            dest[4 * x + 0] = source[x * 3 + 0];
-            dest[4 * x + 1] = source[x * 3 + 1];
-            dest[4 * x + 2] = source[x * 3 + 2];
-            dest[4 * x + 3] = 0x3C00; // SEEEEEMMMMMMMMMM, S = 0, E = 15, M = 0: 16bit flpt representation of 1
-        }
-    }
-}
-
-void Image::loadRGBAUByteDataToBGRA(GLsizei width, GLsizei height,
-                                    int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned int *source = NULL;
-    unsigned int *dest = NULL;
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned int*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned int*>(static_cast<unsigned char*>(output) + y * outputPitch);
-
-        for (int x = 0; x < width; x++)
-        {
-            unsigned int rgba = source[x];
-            dest[x] = (_rotl(rgba, 16) & 0x00ff00ff) | (rgba & 0xff00ff00);
-        }
-    }
-}
-
-void Image::loadRGBAUByteDataToNative(GLsizei width, GLsizei height,
-                                      int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned int *source = NULL;
-    unsigned int *dest = NULL;
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned int*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned int*>(static_cast<unsigned char*>(output) + y * outputPitch);
-
-        memcpy(dest, source, width * 4);
-    }
-}
-
-void Image::loadRGBA4444DataToBGRA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            unsigned short rgba = source[x];
-            dest[4 * x + 0] = ((rgba & 0x00F0) << 0) | ((rgba & 0x00F0) >> 4);
-            dest[4 * x + 1] = ((rgba & 0x0F00) >> 4) | ((rgba & 0x0F00) >> 8);
-            dest[4 * x + 2] = ((rgba & 0xF000) >> 8) | ((rgba & 0xF000) >> 12);
-            dest[4 * x + 3] = ((rgba & 0x000F) << 4) | ((rgba & 0x000F) >> 0);
-        }
-    }
-}
-
-void Image::loadRGBA4444DataToRGBA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            unsigned short rgba = source[x];
-            dest[4 * x + 0] = ((rgba & 0xF000) >> 8) | ((rgba & 0xF000) >> 12);
-            dest[4 * x + 1] = ((rgba & 0x0F00) >> 4) | ((rgba & 0x0F00) >> 8);
-            dest[4 * x + 2] = ((rgba & 0x00F0) << 0) | ((rgba & 0x00F0) >> 4);
-            dest[4 * x + 3] = ((rgba & 0x000F) << 4) | ((rgba & 0x000F) >> 0);
-        }
-    }
-}
-
-void Image::loadRGBA5551DataToBGRA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            unsigned short rgba = source[x];
-            dest[4 * x + 0] = ((rgba & 0x003E) << 2) | ((rgba & 0x003E) >> 3);
-            dest[4 * x + 1] = ((rgba & 0x07C0) >> 3) | ((rgba & 0x07C0) >> 8);
-            dest[4 * x + 2] = ((rgba & 0xF800) >> 8) | ((rgba & 0xF800) >> 13);
-            dest[4 * x + 3] = (rgba & 0x0001) ? 0xFF : 0;
-        }
-    }
-}
-
-void Image::loadRGBA5551DataToRGBA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned short *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned short*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        for (int x = 0; x < width; x++)
-        {
-            unsigned short rgba = source[x];
-            dest[4 * x + 0] = ((rgba & 0xF800) >> 8) | ((rgba & 0xF800) >> 13);
-            dest[4 * x + 1] = ((rgba & 0x07C0) >> 3) | ((rgba & 0x07C0) >> 8);
-            dest[4 * x + 2] = ((rgba & 0x003E) << 2) | ((rgba & 0x003E) >> 3);
-            dest[4 * x + 3] = (rgba & 0x0001) ? 0xFF : 0;
-        }
-    }
-}
-
-void Image::loadRGBAFloatDataToRGBA(GLsizei width, GLsizei height,
-                                    int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const float *source = NULL;
-    float *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const float*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<float*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        memcpy(dest, source, width * 16);
-    }
-}
-
-void Image::loadRGBAHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        memcpy(dest, source, width * 8);
-    }
-}
-
-void Image::loadBGRADataToBGRA(GLsizei width, GLsizei height,
-                               int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned char *dest = NULL;
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = static_cast<unsigned char*>(output) + y * outputPitch;
-        memcpy(dest, source, width*4);
-    }
+    mTarget = GL_NONE;
+    mRenderable = false;
+    mDirty = false;
 }
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Image.h b/src/3rdparty/angle/src/libGLESv2/renderer/Image.h
index 454e83e21e..3bfc663762 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/Image.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Image.h
@@ -13,6 +13,8 @@
 
 #include "common/debug.h"
 
+#include <GLES2/gl2.h>
+
 namespace gl
 {
 class Framebuffer;
@@ -20,9 +22,8 @@ class Framebuffer;
 
 namespace rx
 {
+
 class Renderer;
-class TextureStorageInterface2D;
-class TextureStorageInterfaceCube;
 
 class Image
 {
@@ -32,93 +33,33 @@ class Image
 
     GLsizei getWidth() const { return mWidth; }
     GLsizei getHeight() const { return mHeight; }
+    GLsizei getDepth() const { return mDepth; }
     GLenum getInternalFormat() const { return mInternalFormat; }
     GLenum getActualFormat() const { return mActualFormat; }
+    GLenum getTarget() const { return mTarget; }
+    bool isRenderableFormat() const { return mRenderable; }
 
     void markDirty() {mDirty = true;}
     void markClean() {mDirty = false;}
     virtual bool isDirty() const = 0;
 
-    virtual void setManagedSurface(TextureStorageInterface2D *storage, int level) {};
-    virtual void setManagedSurface(TextureStorageInterfaceCube *storage, int face, int level) {};
-    virtual bool updateSurface(TextureStorageInterface2D *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height) = 0;
-    virtual bool updateSurface(TextureStorageInterfaceCube *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height) = 0;
-
-    virtual bool redefine(Renderer *renderer, GLint internalformat, GLsizei width, GLsizei height, bool forceRelease) = 0;
+    virtual bool redefine(Renderer *renderer, GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, bool forceRelease) = 0;
 
-    virtual bool isRenderableFormat() const = 0;
-    
-    virtual void loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                  GLint unpackAlignment, const void *input) = 0;
-    virtual void loadCompressedData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
+    virtual void loadData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                          GLint unpackAlignment, GLenum type, const void *input) = 0;
+    virtual void loadCompressedData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
                                     const void *input) = 0;
 
-    virtual void copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source) = 0;
-
-    static void loadAlphaDataToBGRA(GLsizei width, GLsizei height,
-                                    int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadAlphaDataToNative(GLsizei width, GLsizei height,
-                                      int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadAlphaDataToBGRASSE2(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadAlphaFloatDataToRGBA(GLsizei width, GLsizei height,
-                                         int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadAlphaHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                             int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadLuminanceDataToNativeOrBGRA(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output, bool native);
-    static void loadLuminanceFloatDataToRGBA(GLsizei width, GLsizei height,
-                                             int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadLuminanceFloatDataToRGB(GLsizei width, GLsizei height,
-                                            int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadLuminanceHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                                 int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadLuminanceAlphaDataToNativeOrBGRA(GLsizei width, GLsizei height,
-                                             int inputPitch, const void *input, size_t outputPitch, void *output, bool native);
-    static void loadLuminanceAlphaFloatDataToRGBA(GLsizei width, GLsizei height,
-                                                  int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadLuminanceAlphaHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                                      int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBUByteDataToBGRX(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBUByteDataToRGBA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGB565DataToBGRA(GLsizei width, GLsizei height,
-                                     int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGB565DataToRGBA(GLsizei width, GLsizei height,
-                                     int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBFloatDataToRGBA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBFloatDataToNative(GLsizei width, GLsizei height,
-                                         int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                           int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBAUByteDataToBGRASSE2(GLsizei width, GLsizei height,
-                                            int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBAUByteDataToBGRA(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBAUByteDataToNative(GLsizei width, GLsizei height,
-                                          int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBA4444DataToBGRA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBA4444DataToRGBA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBA5551DataToBGRA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBA5551DataToRGBA(GLsizei width, GLsizei height,
-                                       int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBAFloatDataToRGBA(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadRGBAHalfFloatDataToRGBA(GLsizei width, GLsizei height,
-                                            int inputPitch, const void *input, size_t outputPitch, void *output);
-    static void loadBGRADataToBGRA(GLsizei width, GLsizei height,
-                                   int inputPitch, const void *input, size_t outputPitch, void *output);
+    virtual void copy(GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source) = 0;
 
   protected:
     GLsizei mWidth;
     GLsizei mHeight;
-    GLint mInternalFormat;
+    GLsizei mDepth;
+    GLenum mInternalFormat;
     GLenum mActualFormat;
+    bool mRenderable;
+    GLenum mTarget;
 
     bool mDirty;
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/ImageSSE2.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/ImageSSE2.cpp
deleted file mode 100644
index b2a90ca961..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/ImageSSE2.cpp
+++ /dev/null
@@ -1,100 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// ImageSSE2.cpp: Implements SSE2-based functions of rx::Image class. It's
-// in a separated file for GCC, which can enable SSE usage only per-file,
-// not for code blocks that use SSE2 explicitly.
-
-#include "libGLESv2/Texture.h"
-#include "libGLESv2/renderer/Image.h"
-
-namespace rx
-{
-
-void Image::loadRGBAUByteDataToBGRASSE2(GLsizei width, GLsizei height,
-                                        int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned int *source = NULL;
-    unsigned int *dest = NULL;
-    __m128i brMask = _mm_set1_epi32(0x00ff00ff);
-
-    for (int y = 0; y < height; y++)
-    {
-        source = reinterpret_cast<const unsigned int*>(static_cast<const unsigned char*>(input) + y * inputPitch);
-        dest = reinterpret_cast<unsigned int*>(static_cast<unsigned char*>(output) + y * outputPitch);
-        int x = 0;
-
-        // Make output writes aligned
-        for (x = 0; ((reinterpret_cast<intptr_t>(&dest[x]) & 15) != 0) && x < width; x++)
-        {
-            unsigned int rgba = source[x];
-            dest[x] = (_rotl(rgba, 16) & 0x00ff00ff) | (rgba & 0xff00ff00);
-        }
-
-        for (; x + 3 < width; x += 4)
-        {
-            __m128i sourceData = _mm_loadu_si128(reinterpret_cast<const __m128i*>(&source[x]));
-            // Mask out g and a, which don't change
-            __m128i gaComponents = _mm_andnot_si128(brMask, sourceData);
-            // Mask out b and r
-            __m128i brComponents = _mm_and_si128(sourceData, brMask);
-            // Swap b and r
-            __m128i brSwapped = _mm_shufflehi_epi16(_mm_shufflelo_epi16(brComponents, _MM_SHUFFLE(2, 3, 0, 1)), _MM_SHUFFLE(2, 3, 0, 1));
-            __m128i result = _mm_or_si128(gaComponents, brSwapped);
-            _mm_store_si128(reinterpret_cast<__m128i*>(&dest[x]), result);
-        }
-
-        // Perform leftover writes
-        for (; x < width; x++)
-        {
-            unsigned int rgba = source[x];
-            dest[x] = (_rotl(rgba, 16) & 0x00ff00ff) | (rgba & 0xff00ff00);
-        }
-    }
-}
-
-void Image::loadAlphaDataToBGRASSE2(GLsizei width, GLsizei height,
-                                    int inputPitch, const void *input, size_t outputPitch, void *output)
-{
-    const unsigned char *source = NULL;
-    unsigned int *dest = NULL;
-    __m128i zeroWide = _mm_setzero_si128();
-
-    for (int y = 0; y < height; y++)
-    {
-        source = static_cast<const unsigned char*>(input) + y * inputPitch;
-        dest = reinterpret_cast<unsigned int*>(static_cast<unsigned char*>(output) + y * outputPitch);
-
-        int x;
-        // Make output writes aligned
-        for (x = 0; ((reinterpret_cast<intptr_t>(&dest[x]) & 0xF) != 0 && x < width); x++)
-        {
-            dest[x] = static_cast<unsigned int>(source[x]) << 24;
-        }
-
-        for (; x + 7 < width; x += 8)
-        {
-            __m128i sourceData = _mm_loadl_epi64(reinterpret_cast<const __m128i*>(&source[x]));
-            // Interleave each byte to 16bit, make the lower byte to zero
-            sourceData = _mm_unpacklo_epi8(zeroWide, sourceData);
-            // Interleave each 16bit to 32bit, make the lower 16bit to zero
-            __m128i lo = _mm_unpacklo_epi16(zeroWide, sourceData);
-            __m128i hi = _mm_unpackhi_epi16(zeroWide, sourceData);
-
-            _mm_store_si128(reinterpret_cast<__m128i*>(&dest[x]), lo);
-            _mm_store_si128(reinterpret_cast<__m128i*>(&dest[x + 4]), hi);
-        }
-
-        // Handle the remainder
-        for (; x < width; x++)
-        {
-            dest[x] = static_cast<unsigned int>(source[x]) << 24;
-        }
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexDataManager.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/IndexDataManager.cpp
deleted file mode 100644
index 49bace8193..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexDataManager.cpp
+++ /dev/null
@@ -1,339 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// IndexDataManager.cpp: Defines the IndexDataManager, a class that
-// runs the Buffer translation process for index buffers.
-
-#include "libGLESv2/renderer/IndexDataManager.h"
-#include "libGLESv2/renderer/BufferStorage.h"
-
-#include "libGLESv2/Buffer.h"
-#include "libGLESv2/main.h"
-#include "libGLESv2/utilities.h"
-#include "libGLESv2/renderer/IndexBuffer.h"
-
-namespace rx
-{
-
-IndexDataManager::IndexDataManager(Renderer *renderer) : mRenderer(renderer)
-{
-    mStreamingBufferShort = new StreamingIndexBufferInterface(mRenderer);
-    if (!mStreamingBufferShort->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_SHORT))
-    {
-        delete mStreamingBufferShort;
-        mStreamingBufferShort = NULL;
-    }
-
-    mStreamingBufferInt = new StreamingIndexBufferInterface(mRenderer);
-    if (!mStreamingBufferInt->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT))
-    {
-        delete mStreamingBufferInt;
-        mStreamingBufferInt = NULL;
-    }
-
-    if (!mStreamingBufferShort)
-    {
-        // Make sure both buffers are deleted.
-        delete mStreamingBufferInt;
-        mStreamingBufferInt = NULL;
-
-        ERR("Failed to allocate the streaming index buffer(s).");
-    }
-
-    mCountingBuffer = NULL;
-}
-
-IndexDataManager::~IndexDataManager()
-{
-    delete mStreamingBufferShort;
-    delete mStreamingBufferInt;
-    delete mCountingBuffer;
-}
-
-static void convertIndices(GLenum type, const void *input, GLsizei count, void *output)
-{
-    if (type == GL_UNSIGNED_BYTE)
-    {
-        const GLubyte *in = static_cast<const GLubyte*>(input);
-        GLushort *out = static_cast<GLushort*>(output);
-
-        for (GLsizei i = 0; i < count; i++)
-        {
-            out[i] = in[i];
-        }
-    }
-    else if (type == GL_UNSIGNED_INT)
-    {
-        memcpy(output, input, count * sizeof(GLuint));
-    }
-    else if (type == GL_UNSIGNED_SHORT)
-    {
-        memcpy(output, input, count * sizeof(GLushort));
-    }
-    else UNREACHABLE();
-}
-
-template <class IndexType>
-static void computeRange(const IndexType *indices, GLsizei count, GLuint *minIndex, GLuint *maxIndex)
-{
-    *minIndex = indices[0];
-    *maxIndex = indices[0];
-
-    for (GLsizei i = 0; i < count; i++)
-    {
-        if (*minIndex > indices[i]) *minIndex = indices[i];
-        if (*maxIndex < indices[i]) *maxIndex = indices[i];
-    }
-}
-
-static void computeRange(GLenum type, const GLvoid *indices, GLsizei count, GLuint *minIndex, GLuint *maxIndex)
-{
-    if (type == GL_UNSIGNED_BYTE)
-    {
-        computeRange(static_cast<const GLubyte*>(indices), count, minIndex, maxIndex);
-    }
-    else if (type == GL_UNSIGNED_INT)
-    {
-        computeRange(static_cast<const GLuint*>(indices), count, minIndex, maxIndex);
-    }
-    else if (type == GL_UNSIGNED_SHORT)
-    {
-        computeRange(static_cast<const GLushort*>(indices), count, minIndex, maxIndex);
-    }
-    else UNREACHABLE();
-}
-
-GLenum IndexDataManager::prepareIndexData(GLenum type, GLsizei count, gl::Buffer *buffer, const GLvoid *indices, TranslatedIndexData *translated)
-{
-    if (!mStreamingBufferShort)
-    {
-        return GL_OUT_OF_MEMORY;
-    }
-
-    GLenum destinationIndexType = (type == GL_UNSIGNED_INT) ? GL_UNSIGNED_INT : GL_UNSIGNED_SHORT;
-    unsigned int offset = 0;
-    bool alignedOffset = false;
-
-    BufferStorage *storage = NULL;
-
-    if (buffer != NULL)
-    {
-        if (reinterpret_cast<uintptr_t>(indices) > std::numeric_limits<unsigned int>::max())
-        {
-            return GL_OUT_OF_MEMORY;
-        }
-        offset = static_cast<unsigned int>(reinterpret_cast<uintptr_t>(indices));
-
-        storage = buffer->getStorage();
-
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:  alignedOffset = (offset % sizeof(GLubyte) == 0);  break;
-          case GL_UNSIGNED_SHORT: alignedOffset = (offset % sizeof(GLushort) == 0); break;
-          case GL_UNSIGNED_INT:   alignedOffset = (offset % sizeof(GLuint) == 0);   break;
-          default: UNREACHABLE(); alignedOffset = false;
-        }
-
-        unsigned int typeSize = gl::ComputeTypeSize(type);
-
-        // check for integer overflows
-        if (static_cast<unsigned int>(count) > (std::numeric_limits<unsigned int>::max() / typeSize) ||
-            typeSize * static_cast<unsigned int>(count) + offset < offset)
-        {
-            return GL_OUT_OF_MEMORY;
-        }
-
-        if (typeSize * static_cast<unsigned int>(count) + offset > storage->getSize())
-        {
-            return GL_INVALID_OPERATION;
-        }
-
-        indices = static_cast<const GLubyte*>(storage->getData()) + offset;
-    }
-
-    StreamingIndexBufferInterface *streamingBuffer = (type == GL_UNSIGNED_INT) ? mStreamingBufferInt : mStreamingBufferShort;
-
-    StaticIndexBufferInterface *staticBuffer = buffer ? buffer->getStaticIndexBuffer() : NULL;
-    IndexBufferInterface *indexBuffer = streamingBuffer;
-    bool directStorage = alignedOffset && storage && storage->supportsDirectBinding() &&
-                         destinationIndexType == type;
-    unsigned int streamOffset = 0;
-
-    if (directStorage)
-    {
-        indexBuffer = streamingBuffer;
-        streamOffset = offset;
-        storage->markBufferUsage();
-
-        if (!buffer->getIndexRangeCache()->findRange(type, offset, count, &translated->minIndex,
-                                                     &translated->maxIndex, NULL))
-        {
-            computeRange(type, indices, count, &translated->minIndex, &translated->maxIndex);
-            buffer->getIndexRangeCache()->addRange(type, offset, count, translated->minIndex,
-                                                   translated->maxIndex, offset);
-        }
-    }
-    else if (staticBuffer && staticBuffer->getBufferSize() != 0 && staticBuffer->getIndexType() == type && alignedOffset)
-    {
-        indexBuffer = staticBuffer;
-        if (!staticBuffer->getIndexRangeCache()->findRange(type, offset, count, &translated->minIndex,
-                                                           &translated->maxIndex, &streamOffset))
-        {
-            streamOffset = (offset / gl::ComputeTypeSize(type)) * gl::ComputeTypeSize(destinationIndexType);
-            computeRange(type, indices, count, &translated->minIndex, &translated->maxIndex);
-            staticBuffer->getIndexRangeCache()->addRange(type, offset, count, translated->minIndex,
-                                                         translated->maxIndex, streamOffset);
-        }
-    }
-    else
-    {
-        unsigned int convertCount = count;
-
-        if (staticBuffer)
-        {
-            if (staticBuffer->getBufferSize() == 0 && alignedOffset)
-            {
-                indexBuffer = staticBuffer;
-                convertCount = storage->getSize() / gl::ComputeTypeSize(type);
-            }
-            else
-            {
-                buffer->invalidateStaticData();
-                staticBuffer = NULL;
-            }
-        }
-
-        if (!indexBuffer)
-        {
-            ERR("No valid index buffer.");
-            return GL_INVALID_OPERATION;
-        }
-
-        unsigned int indexTypeSize = gl::ComputeTypeSize(destinationIndexType);
-        if (convertCount > std::numeric_limits<unsigned int>::max() / indexTypeSize)
-        {
-            ERR("Reserving %u indicies of %u bytes each exceeds the maximum buffer size.", convertCount, indexTypeSize);
-            return GL_OUT_OF_MEMORY;
-        }
-
-        unsigned int bufferSizeRequired = convertCount * indexTypeSize;
-        if (!indexBuffer->reserveBufferSpace(bufferSizeRequired, type))
-        {
-            ERR("Failed to reserve %u bytes in an index buffer.", bufferSizeRequired);
-            return GL_OUT_OF_MEMORY;
-        }
-
-        void* output = NULL;
-        if (!indexBuffer->mapBuffer(bufferSizeRequired, &output, &streamOffset))
-        {
-            ERR("Failed to map index buffer.");
-            return GL_OUT_OF_MEMORY;
-        }
-
-        convertIndices(type, staticBuffer ? storage->getData() : indices, convertCount, output);
-
-        if (!indexBuffer->unmapBuffer())
-        {
-            ERR("Failed to unmap index buffer.");
-            return GL_OUT_OF_MEMORY;
-        }
-
-        computeRange(type, indices, count, &translated->minIndex, &translated->maxIndex);
-
-        if (staticBuffer)
-        {
-            streamOffset = (offset / gl::ComputeTypeSize(type)) * gl::ComputeTypeSize(destinationIndexType);
-            staticBuffer->getIndexRangeCache()->addRange(type, offset, count, translated->minIndex,
-                                                         translated->maxIndex, streamOffset);
-        }
-    }
-
-    translated->storage = directStorage ? storage : NULL;
-    translated->indexBuffer = indexBuffer->getIndexBuffer();
-    translated->serial = directStorage ? storage->getSerial() : indexBuffer->getSerial();
-    translated->startIndex = streamOffset / gl::ComputeTypeSize(destinationIndexType);
-    translated->startOffset = streamOffset;
-
-    if (buffer)
-    {
-        buffer->promoteStaticUsage(count * gl::ComputeTypeSize(type));
-    }
-
-    return GL_NO_ERROR;
-}
-
-StaticIndexBufferInterface *IndexDataManager::getCountingIndices(GLsizei count)
-{
-    if (count <= 65536)   // 16-bit indices
-    {
-        const unsigned int spaceNeeded = count * sizeof(unsigned short);
-
-        if (!mCountingBuffer || mCountingBuffer->getBufferSize() < spaceNeeded)
-        {
-            delete mCountingBuffer;
-            mCountingBuffer = new StaticIndexBufferInterface(mRenderer);
-            mCountingBuffer->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_SHORT);
-
-            void* mappedMemory = NULL;
-            if (!mCountingBuffer->mapBuffer(spaceNeeded, &mappedMemory, NULL))
-            {
-                ERR("Failed to map counting buffer.");
-                return NULL;
-            }
-
-            unsigned short *data = reinterpret_cast<unsigned short*>(mappedMemory);
-            for(int i = 0; i < count; i++)
-            {
-                data[i] = i;
-            }
-
-            if (!mCountingBuffer->unmapBuffer())
-            {
-                ERR("Failed to unmap counting buffer.");
-                return NULL;
-            }
-        }
-    }
-    else if (mStreamingBufferInt)   // 32-bit indices supported
-    {
-        const unsigned int spaceNeeded = count * sizeof(unsigned int);
-
-        if (!mCountingBuffer || mCountingBuffer->getBufferSize() < spaceNeeded)
-        {
-            delete mCountingBuffer;
-            mCountingBuffer = new StaticIndexBufferInterface(mRenderer);
-            mCountingBuffer->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT);
-
-            void* mappedMemory = NULL;
-            if (!mCountingBuffer->mapBuffer(spaceNeeded, &mappedMemory, NULL))
-            {
-                ERR("Failed to map counting buffer.");
-                return NULL;
-            }
-
-            unsigned int *data = reinterpret_cast<unsigned int*>(mappedMemory);
-            for(int i = 0; i < count; i++)
-            {
-                data[i] = i;
-            }
-
-            if (!mCountingBuffer->unmapBuffer())
-            {
-                ERR("Failed to unmap counting buffer.");
-                return NULL;
-            }
-        }
-    }
-    else
-    {
-        return NULL;
-    }
-
-    return mCountingBuffer;
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp
index 51d7f0b653..f68ac383de 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -9,17 +8,50 @@
 // ranges of indices.
 
 #include "libGLESv2/renderer/IndexRangeCache.h"
+#include "libGLESv2/formatutils.h"
+
 #include "common/debug.h"
-#include "libGLESv2/utilities.h"
+
 #include <tuple>
 
 namespace rx
 {
 
-void IndexRangeCache::addRange(GLenum type, unsigned int offset, GLsizei count, unsigned int minIdx, unsigned int maxIdx,
+template <class IndexType>
+static RangeUI ComputeTypedRange(const IndexType *indices, GLsizei count)
+{
+    unsigned int minIndex = indices[0];
+    unsigned int maxIndex = indices[0];
+
+    for (GLsizei i = 1; i < count; i++)
+    {
+        if (minIndex > indices[i]) minIndex = indices[i];
+        if (maxIndex < indices[i]) maxIndex = indices[i];
+    }
+
+    return RangeUI(minIndex, maxIndex);
+}
+
+RangeUI IndexRangeCache::ComputeRange(GLenum type, const GLvoid *indices, GLsizei count)
+{
+    switch (type)
+    {
+      case GL_UNSIGNED_BYTE:
+        return ComputeTypedRange(static_cast<const GLubyte*>(indices), count);
+      case GL_UNSIGNED_INT:
+        return ComputeTypedRange(static_cast<const GLuint*>(indices), count);
+      case GL_UNSIGNED_SHORT:
+        return ComputeTypedRange(static_cast<const GLushort*>(indices), count);
+      default:
+        UNREACHABLE();
+        return RangeUI();
+    }
+}
+
+void IndexRangeCache::addRange(GLenum type, unsigned int offset, GLsizei count, const RangeUI &range,
                                unsigned int streamOffset)
 {
-    mIndexRangeCache[IndexRange(type, offset, count)] = IndexBounds(minIdx, maxIdx, streamOffset);
+    mIndexRangeCache[IndexRange(type, offset, count)] = IndexBounds(range, streamOffset);
 }
 
 void IndexRangeCache::invalidateRange(unsigned int offset, unsigned int size)
@@ -31,7 +63,7 @@ void IndexRangeCache::invalidateRange(unsigned int offset, unsigned int size)
     while (i != mIndexRangeCache.end())
     {
         unsigned int rangeStart = i->second.streamOffset;
-        unsigned int rangeEnd = i->second.streamOffset + (gl::ComputeTypeSize(i->first.type) * i->first.count);
+        unsigned int rangeEnd = i->second.streamOffset + (gl::GetTypeInfo(i->first.type).bytes * i->first.count);
 
         if (invalidateEnd < rangeStart || invalidateStart > rangeEnd)
         {
@@ -44,21 +76,19 @@ void IndexRangeCache::invalidateRange(unsigned int offset, unsigned int size)
     }
 }
 
-bool IndexRangeCache::findRange(GLenum type, unsigned int offset, GLsizei count, unsigned int *outMinIndex,
-                                unsigned int *outMaxIndex, unsigned int *outStreamOffset) const
+bool IndexRangeCache::findRange(GLenum type, unsigned int offset, GLsizei count,
+                                RangeUI *outRange, unsigned int *outStreamOffset) const
 {
     IndexRangeMap::const_iterator i = mIndexRangeCache.find(IndexRange(type, offset, count));
     if (i != mIndexRangeCache.end())
     {
-        if (outMinIndex)     *outMinIndex = i->second.minIndex;
-        if (outMaxIndex)     *outMaxIndex = i->second.maxIndex;
+        if (outRange)        *outRange = i->second.range;
         if (outStreamOffset) *outStreamOffset = i->second.streamOffset;
         return true;
     }
     else
     {
-        if (outMinIndex)     *outMinIndex = 0;
-        if (outMaxIndex)     *outMaxIndex = 0;
+        if (outRange)        *outRange = RangeUI(0, 0);
         if (outStreamOffset) *outStreamOffset = 0;
         return false;
     }
@@ -89,12 +119,13 @@ bool IndexRangeCache::IndexRange::operator<(const IndexRange& rhs) const
 }
 
 IndexRangeCache::IndexBounds::IndexBounds()
-    : minIndex(0), maxIndex(0), streamOffset(0)
+    : range(0, 0),
+      streamOffset(0)
 {
 }
 
-IndexRangeCache::IndexBounds::IndexBounds(unsigned int minIdx, unsigned int maxIdx, unsigned int offset)
-    : minIndex(minIdx), maxIndex(maxIdx), streamOffset(offset)
+IndexRangeCache::IndexBounds::IndexBounds(const RangeUI &rangeIn, unsigned int offset)
+    : range(rangeIn), streamOffset(offset)
 {
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.h b/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.h
index 56834306f2..a7d91e035b 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.h
@@ -11,6 +11,11 @@
 #define LIBGLESV2_RENDERER_INDEXRANGECACHE_H_
 
 #include "common/angleutils.h"
+#include "common/mathutil.h"
+
+#include "angle_gl.h"
+
+#include <map>
 
 namespace rx
 {
@@ -18,14 +23,16 @@ namespace rx
 class IndexRangeCache
 {
   public:
-    void addRange(GLenum type, unsigned int offset, GLsizei count, unsigned int minIdx, unsigned int maxIdx,
+    void addRange(GLenum type, unsigned int offset, GLsizei count, const RangeUI &range,
                   unsigned int streamOffset);
-    bool findRange(GLenum type, unsigned int offset, GLsizei count, unsigned int *outMinIndex,
-                   unsigned int *outMaxIndex, unsigned int *outStreamOffset) const;
+    bool findRange(GLenum type, unsigned int offset, GLsizei count, RangeUI *rangeOut,
+                   unsigned int *outStreamOffset) const;
 
     void invalidateRange(unsigned int offset, unsigned int size);
     void clear();
 
+    static RangeUI ComputeRange(GLenum type, const GLvoid *indices, GLsizei count);
+
   private:
     struct IndexRange
     {
@@ -41,12 +48,11 @@ class IndexRangeCache
 
     struct IndexBounds
     {
-        unsigned int minIndex;
-        unsigned int maxIndex;
+        RangeUI range;
         unsigned int streamOffset;
 
         IndexBounds();
-        IndexBounds(unsigned int minIdx, unsigned int maxIdx, unsigned int offset);
+        IndexBounds(const RangeUI &range, unsigned int offset);
     };
 
     typedef std::map<IndexRange, IndexBounds> IndexRangeMap;
@@ -55,4 +61,4 @@ class IndexRangeCache
 
 }
 
-#endif LIBGLESV2_RENDERER_INDEXRANGECACHE_H
+#endif // LIBGLESV2_RENDERER_INDEXRANGECACHE_H
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/ProgramImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/ProgramImpl.h
new file mode 100644
index 0000000000..ba0955fdf8
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/ProgramImpl.h
@@ -0,0 +1,58 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ProgramImpl.h: Defines the abstract rx::ProgramImpl class.
+
+#ifndef LIBGLESV2_RENDERER_PROGRAMIMPL_H_
+#define LIBGLESV2_RENDERER_PROGRAMIMPL_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/BinaryStream.h"
+#include "libGLESv2/Constants.h"
+#include "libGLESv2/ProgramBinary.h"
+
+namespace rx
+{
+
+class DynamicHLSL;
+class Renderer;
+
+class ProgramImpl
+{
+public:
+    virtual ~ProgramImpl() { }
+
+    // TODO: Temporary interfaces to ease migration. Remove soon!
+    virtual Renderer *getRenderer() = 0;
+    virtual DynamicHLSL *getDynamicHLSL() = 0;
+    virtual const std::vector<rx::PixelShaderOutputVariable> &getPixelShaderKey() = 0;
+
+    virtual GLenum getBinaryFormat() = 0;
+    virtual bool load(gl::InfoLog &infoLog, gl::BinaryInputStream *stream) = 0;
+    virtual bool save(gl::BinaryOutputStream *stream) = 0;
+
+    virtual rx::ShaderExecutable *getPixelExecutableForOutputLayout(gl::InfoLog &infoLog, const std::vector<GLenum> &outputSignature,
+                                                                    const std::vector<gl::LinkedVarying> &transformFeedbackLinkedVaryings,
+                                                                    bool separatedOutputBuffers) = 0;
+    virtual rx::ShaderExecutable *getVertexExecutableForInputLayout(gl::InfoLog &infoLog,
+                                                                    const gl::VertexFormat inputLayout[gl::MAX_VERTEX_ATTRIBS],
+                                                                    const sh::Attribute shaderAttributes[],
+                                                                    const std::vector<gl::LinkedVarying> &transformFeedbackLinkedVaryings,
+                                                                    bool separatedOutputBuffers) = 0;
+
+    virtual bool link(gl::InfoLog &infoLog, gl::Shader *fragmentShader, gl::Shader *vertexShader,
+                      const std::vector<std::string> &transformFeedbackVaryings, int *registers,
+                      std::vector<gl::LinkedVarying> *linkedVaryings, std::map<int,
+                      gl::VariableLocation> *outputVariables) = 0;
+
+    virtual void initializeUniformStorage(const std::vector<gl::LinkedUniform*> &uniforms) = 0;
+
+    virtual void reset() = 0;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_PROGRAMIMPL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/QueryImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/QueryImpl.h
index a874047b0c..6b45810a3b 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/QueryImpl.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/QueryImpl.h
@@ -9,27 +9,27 @@
 #ifndef LIBGLESV2_RENDERER_QUERYIMPL_H_
 #define LIBGLESV2_RENDERER_QUERYIMPL_H_
 
+#include "libGLESv2/Error.h"
+
 #include "common/angleutils.h"
 
+#include <GLES2/gl2.h>
+
 namespace rx
 {
 
 class QueryImpl
 {
   public:
-    explicit QueryImpl(GLenum type) : mType(type), mStatus(GL_FALSE), mResult(0) { }
+    explicit QueryImpl(GLenum type) { mType = type; }
     virtual ~QueryImpl() { }
 
-    virtual void begin() = 0;
-    virtual void end() = 0;
-    virtual GLuint getResult() = 0;
-    virtual GLboolean isResultAvailable() = 0;
-
-    GLenum getType() const { return mType; }
+    virtual gl::Error begin() = 0;
+    virtual gl::Error end() = 0;
+    virtual gl::Error getResult(GLuint *params) = 0;
+    virtual gl::Error isResultAvailable(GLuint *available) = 0;
 
-  protected:
-    GLuint mResult;
-    GLboolean mStatus;
+    GLenum getType() const { return mType;  }
 
   private:
     DISALLOW_COPY_AND_ASSIGN(QueryImpl);
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/RenderTarget.h b/src/3rdparty/angle/src/libGLESv2/renderer/RenderTarget.h
index 80de39f4f7..44637ec7de 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/RenderTarget.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/RenderTarget.h
@@ -11,6 +11,7 @@
 #define LIBGLESV2_RENDERER_RENDERTARGET_H_
 
 #include "common/angleutils.h"
+#include "libGLESv2/angletypes.h"
 
 namespace rx
 {
@@ -21,6 +22,7 @@ class RenderTarget
     {
         mWidth = 0;
         mHeight = 0;
+        mDepth = 0;
         mInternalFormat = GL_NONE;
         mActualFormat = GL_NONE;
         mSamples = 0;
@@ -28,21 +30,27 @@ class RenderTarget
 
     virtual ~RenderTarget() {};
 
-    GLsizei getWidth() { return mWidth; }
-    GLsizei getHeight() { return mHeight; }
-    GLenum getInternalFormat() { return mInternalFormat; }
-    GLenum getActualFormat() { return mActualFormat; }
-    GLsizei getSamples() { return mSamples; }
-    
+    GLsizei getWidth() const { return mWidth; }
+    GLsizei getHeight() const { return mHeight; }
+    GLsizei getDepth() const { return mDepth; }
+    GLenum getInternalFormat() const { return mInternalFormat; }
+    GLenum getActualFormat() const { return mActualFormat; }
+    GLsizei getSamples() const { return mSamples; }
+    gl::Extents getExtents() const { return gl::Extents(mWidth, mHeight, mDepth); }
+
+    virtual void invalidate(GLint x, GLint y, GLsizei width, GLsizei height) = 0;
+
     struct Desc {
         GLsizei width;
         GLsizei height;
+        GLsizei depth;
         GLenum  format;
     };
 
   protected:
     GLsizei mWidth;
     GLsizei mHeight;
+    GLsizei mDepth;
     GLenum mInternalFormat;
     GLenum mActualFormat;
     GLsizei mSamples;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
index 5278113811..910d0285f1 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
@@ -1,222 +1,89 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 // Renderer.cpp: Implements EGL dependencies for creating and destroying Renderer instances.
 
-#include <EGL/eglext.h>
 #include "libGLESv2/main.h"
 #include "libGLESv2/Program.h"
 #include "libGLESv2/renderer/Renderer.h"
-#if defined(ANGLE_ENABLE_D3D9)
-#  include "libGLESv2/renderer/d3d9/Renderer9.h"
-#endif
-#if defined(ANGLE_ENABLE_D3D11)
-#  include "libGLESv2/renderer/d3d11/Renderer11.h"
-#endif
-#include "libGLESv2/utilities.h"
-#include "third_party/trace_event/trace_event.h"
-
-#ifndef D3DERR_OUTOFVIDEOMEMORY
-#define D3DERR_OUTOFVIDEOMEMORY MAKE_HRESULT(1, 0x876, 380)
-#endif
-
-#if defined(__MINGW32__) || defined(ANGLE_OS_WINPHONE)
-
-#ifndef D3DCOMPILER_DLL
-
-// Add define + typedefs for older MinGW-w64 headers (pre 5783)
-
-#define D3DCOMPILER_DLL L"d3dcompiler_43.dll"
+#include "common/utilities.h"
+#include "libGLESv2/Shader.h"
 
-HRESULT WINAPI D3DCompile(const void *data, SIZE_T data_size, const char *filename,
-        const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
-        const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **error_messages);
-typedef HRESULT (WINAPI *pD3DCompile)(const void *data, SIZE_T data_size, const char *filename,
-        const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
-        const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **error_messages);
+#if defined (ANGLE_ENABLE_D3D9)
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#endif // ANGLE_ENABLE_D3D9
 
-#endif // D3DCOMPILER_DLL
+#if defined (ANGLE_ENABLE_D3D11)
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#endif // ANGLE_ENABLE_D3D11
 
-#endif // __MINGW32__ || ANGLE_OS_WINPHONE
+#if defined (ANGLE_TEST_CONFIG)
+#define ANGLE_DEFAULT_D3D11 1
+#endif
 
-#ifndef QT_D3DCOMPILER_DLL
-#define QT_D3DCOMPILER_DLL D3DCOMPILER_DLL
+#if !defined(ANGLE_DEFAULT_D3D11)
+// Enables use of the Direct3D 11 API for a default display, when available
+#define ANGLE_DEFAULT_D3D11 0
 #endif
 
+#include <EGL/eglext.h>
+
 namespace rx
 {
 
-Renderer::Renderer(egl::Display *display) : mDisplay(display)
+Renderer::Renderer(egl::Display *display)
+    : mDisplay(display),
+      mCapsInitialized(false),
+      mCurrentClientVersion(2)
 {
-    mD3dCompilerModule = NULL;
-    mD3DCompileFunc = NULL;
 }
 
 Renderer::~Renderer()
 {
-    if (mD3dCompilerModule)
-    {
-        FreeLibrary(mD3dCompilerModule);
-        mD3dCompilerModule = NULL;
-    }
 }
 
-bool Renderer::initializeCompiler()
+const gl::Caps &Renderer::getRendererCaps() const
 {
-    TRACE_EVENT0("gpu", "initializeCompiler");
-#if defined(ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES)
-    // Find a D3DCompiler module that had already been loaded based on a predefined list of versions.
-    static TCHAR* d3dCompilerNames[] = ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES;
-
-    for (size_t i = 0; i < ArraySize(d3dCompilerNames); ++i)
-    {
-        if (GetModuleHandleEx(0, d3dCompilerNames[i], &mD3dCompilerModule))
-        {
-            break;
-        }
-    }
-#endif  // ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES
-
-    // Load the compiler DLL specified by the environment, or default to QT_D3DCOMPILER_DLL
-#if !defined(ANGLE_OS_WINRT)
-    const wchar_t *defaultCompiler = _wgetenv(L"QT_D3DCOMPILER_DLL");
-    if (!defaultCompiler)
-        defaultCompiler = QT_D3DCOMPILER_DLL;
-#else // !ANGLE_OS_WINRT
-#  ifdef _DEBUG
-    const wchar_t *defaultCompiler = L"d3dcompiler_qtd.dll";
-#  else
-    const wchar_t *defaultCompiler = L"d3dcompiler_qt.dll";
-#  endif
-#endif // ANGLE_OS_WINRT
-
-    const wchar_t *compilerDlls[] = {
-        defaultCompiler,
-        L"d3dcompiler_47.dll",
-        L"d3dcompiler_46.dll",
-        L"d3dcompiler_45.dll",
-        L"d3dcompiler_44.dll",
-        L"d3dcompiler_43.dll",
-        0
-    };
-
-    // Load the first available known compiler DLL
-    for (int i = 0; compilerDlls[i]; ++i)
-    {
-        // Load the version of the D3DCompiler DLL associated with the Direct3D version ANGLE was built with.
-        mD3dCompilerModule = LoadLibrary(compilerDlls[i]);
-        if (mD3dCompilerModule)
-            break;
-    }
-
-    if (!mD3dCompilerModule)
+    if (!mCapsInitialized)
     {
-        ERR("No D3D compiler module found - aborting!\n");
-        return false;
+        generateCaps(&mCaps, &mTextureCaps, &mExtensions);
+        mCapsInitialized = true;
     }
 
-    mD3DCompileFunc = reinterpret_cast<pCompileFunc>(GetProcAddress(mD3dCompilerModule, "D3DCompile"));
-    ASSERT(mD3DCompileFunc);
-
-    return mD3DCompileFunc != NULL;
+    return mCaps;
 }
 
-// Compiles HLSL code into executable binaries
-ShaderBlob *Renderer::compileToBinary(gl::InfoLog &infoLog, const char *hlsl, const char *profile, UINT optimizationFlags, bool alternateFlags)
+const gl::TextureCapsMap &Renderer::getRendererTextureCaps() const
 {
-    if (!hlsl)
+    if (!mCapsInitialized)
     {
-        return NULL;
+        generateCaps(&mCaps, &mTextureCaps, &mExtensions);
+        mCapsInitialized = true;
     }
 
-    HRESULT result = S_OK;
-    UINT flags = 0;
-    std::string sourceText;
-    if (gl::perfActive())
-    {
-        flags |= D3DCOMPILE_DEBUG;
-
-#ifdef NDEBUG
-        flags |= optimizationFlags;
-#else
-        flags |= D3DCOMPILE_SKIP_OPTIMIZATION;
-#endif
+    return mTextureCaps;
+}
 
-        std::string sourcePath = getTempPath();
-        sourceText = std::string("#line 2 \"") + sourcePath + std::string("\"\n\n") + std::string(hlsl);
-        writeFile(sourcePath.c_str(), sourceText.c_str(), sourceText.size());
-    }
-    else
+const gl::Extensions &Renderer::getRendererExtensions() const
+{
+    if (!mCapsInitialized)
     {
-        flags |= optimizationFlags;
-        sourceText = hlsl;
+        generateCaps(&mCaps, &mTextureCaps, &mExtensions);
+        mCapsInitialized = true;
     }
 
-    // Sometimes D3DCompile will fail with the default compilation flags for complicated shaders when it would otherwise pass with alternative options.
-    // Try the default flags first and if compilation fails, try some alternatives.
-    const static UINT extraFlags[] =
-    {
-        0,
-        D3DCOMPILE_AVOID_FLOW_CONTROL,
-        D3DCOMPILE_PREFER_FLOW_CONTROL
-    };
-
-    const static char * const extraFlagNames[] =
-    {
-        "default",
-        "avoid flow control",
-        "prefer flow control"
-    };
-
-    int attempts = alternateFlags ? ArraySize(extraFlags) : 1;
-    pD3DCompile compileFunc = reinterpret_cast<pD3DCompile>(mD3DCompileFunc);
-    for (int i = 0; i < attempts; ++i)
-    {
-        ID3DBlob *errorMessage = NULL;
-        ID3DBlob *binary = NULL;
-
-        result = compileFunc(hlsl, strlen(hlsl), gl::g_fakepath, NULL, NULL,
-                             "main", profile, flags | extraFlags[i], 0, &binary, &errorMessage);
-        if (errorMessage)
-        {
-            const char *message = (const char*)errorMessage->GetBufferPointer();
-
-            infoLog.appendSanitized(message);
-            TRACE("\n%s", hlsl);
-            TRACE("\n%s", message);
-
-            errorMessage->Release();
-            errorMessage = NULL;
-        }
-
-        if (SUCCEEDED(result))
-        {
-            return (ShaderBlob*)binary;
-        }
-        else
-        {
-            if (result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY)
-            {
-                return gl::error(GL_OUT_OF_MEMORY, (ShaderBlob*) NULL);
-            }
+    return mExtensions;
+}
 
-            infoLog.append("Warning: D3D shader compilation failed with ");
-            infoLog.append(extraFlagNames[i]);
-            infoLog.append(" flags.");
-            if (i + 1 < attempts)
-            {
-                infoLog.append(" Retrying with ");
-                infoLog.append(extraFlagNames[i + 1]);
-                infoLog.append(".\n");
-            }
-        }
-    }
+typedef Renderer *(*CreateRendererFunction)(egl::Display*, EGLNativeDisplayType, EGLint);
 
-    return NULL;
+template <typename RendererType>
+Renderer *CreateRenderer(egl::Display *display, EGLNativeDisplayType nativeDisplay, EGLint requestedDisplayType)
+{
+    return new RendererType(display, nativeDisplay, requestedDisplayType);
 }
 
 }
@@ -224,56 +91,64 @@ ShaderBlob *Renderer::compileToBinary(gl::InfoLog &infoLog, const char *hlsl, co
 extern "C"
 {
 
-rx::Renderer *glCreateRenderer(egl::Display *display, EGLNativeDisplayType displayId)
+rx::Renderer *glCreateRenderer(egl::Display *display, EGLNativeDisplayType nativeDisplay, EGLint requestedDisplayType)
 {
-    rx::Renderer *renderer = NULL;
-    EGLint status = EGL_BAD_ALLOC;
+    std::vector<rx::CreateRendererFunction> rendererCreationFunctions;
 
-#if defined(ANGLE_OS_WINRT)
-    if (displayId == EGL_DEFAULT_DISPLAY)
-        displayId = EGL_D3D11_ONLY_DISPLAY_ANGLE;
-#endif
-
-#if defined(ANGLE_ENABLE_D3D11)
-    if (displayId == EGL_DEFAULT_DISPLAY ||
-        displayId == EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ||
-        displayId == EGL_D3D11_ONLY_DISPLAY_ANGLE)
-    {
-        renderer = new rx::Renderer11(display);
-
-        if (renderer)
+#   if defined(ANGLE_ENABLE_D3D11)
+        if (nativeDisplay == EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ||
+            nativeDisplay == EGL_D3D11_ONLY_DISPLAY_ANGLE ||
+            requestedDisplayType == EGL_PLATFORM_ANGLE_TYPE_D3D11_ANGLE ||
+            requestedDisplayType == EGL_PLATFORM_ANGLE_TYPE_D3D11_WARP_ANGLE)
         {
-            status = renderer->initialize();
+            rendererCreationFunctions.push_back(rx::CreateRenderer<rx::Renderer11>);
         }
+#   endif
 
-        if (status == EGL_SUCCESS)
+#   if defined(ANGLE_ENABLE_D3D9)
+        if (nativeDisplay == EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ||
+            requestedDisplayType == EGL_PLATFORM_ANGLE_TYPE_D3D9_ANGLE)
         {
-            return renderer;
+            rendererCreationFunctions.push_back(rx::CreateRenderer<rx::Renderer9>);
         }
-        else if (displayId == EGL_D3D11_ONLY_DISPLAY_ANGLE)
-        {
-            return NULL;
-        }
-
-        // Failed to create a D3D11 renderer, try creating a D3D9 renderer
-        delete renderer;
-    }
-#endif // ANGLE_ENABLE_D3D11
-
-#if defined(ANGLE_ENABLE_D3D9)
-    bool softwareDevice = (displayId == EGL_SOFTWARE_DISPLAY_ANGLE);
-    renderer = new rx::Renderer9(display, displayId, softwareDevice);
+#   endif
 
-    if (renderer)
+    if (nativeDisplay != EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE &&
+        nativeDisplay != EGL_D3D11_ONLY_DISPLAY_ANGLE &&
+        requestedDisplayType == EGL_PLATFORM_ANGLE_TYPE_DEFAULT_ANGLE)
     {
-        status = renderer->initialize();
+        // The default display is requested, try the D3D9 and D3D11 renderers, order them using
+        // the definition of ANGLE_DEFAULT_D3D11
+#       if ANGLE_DEFAULT_D3D11
+#           if defined(ANGLE_ENABLE_D3D11)
+                rendererCreationFunctions.push_back(rx::CreateRenderer<rx::Renderer11>);
+#           endif
+#           if defined(ANGLE_ENABLE_D3D9)
+                rendererCreationFunctions.push_back(rx::CreateRenderer<rx::Renderer9>);
+#           endif
+#       else
+#           if defined(ANGLE_ENABLE_D3D9)
+                rendererCreationFunctions.push_back(rx::CreateRenderer<rx::Renderer9>);
+#           endif
+#           if defined(ANGLE_ENABLE_D3D11)
+                rendererCreationFunctions.push_back(rx::CreateRenderer<rx::Renderer11>);
+#           endif
+#       endif
     }
 
-    if (status == EGL_SUCCESS)
+    for (size_t i = 0; i < rendererCreationFunctions.size(); i++)
     {
-        return renderer;
+        rx::Renderer *renderer = rendererCreationFunctions[i](display, nativeDisplay, requestedDisplayType);
+        if (renderer->initialize() == EGL_SUCCESS)
+        {
+            return renderer;
+        }
+        else
+        {
+            // Failed to create the renderer, try the next
+            SafeDelete(renderer);
+        }
     }
-#endif // ANGLE_ENABLE_D3D9
 
     return NULL;
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h
index 79578b2458..b2249741ab 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h
@@ -1,6 +1,5 @@
-#include "../precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -13,23 +12,18 @@
 
 #include "libGLESv2/Uniform.h"
 #include "libGLESv2/angletypes.h"
+#include "libGLESv2/Caps.h"
+#include "libGLESv2/Error.h"
 
-#if !defined(ANGLE_COMPILE_OPTIMIZATION_LEVEL)
-#define ANGLE_COMPILE_OPTIMIZATION_LEVEL D3DCOMPILE_OPTIMIZATION_LEVEL3
-#endif
+#include <cstdint>
 
-const int versionWindowsVista = MAKEWORD(0x00, 0x06);
-const int versionWindows7 = MAKEWORD(0x01, 0x06);
+#include <EGL/egl.h>
 
-// Return the version of the operating system in a format suitable for ordering
-// comparison.
-inline int getComparableOSVersion()
-{
-    DWORD version = GetVersion();
-    int majorVersion = LOBYTE(LOWORD(version));
-    int minorVersion = HIBYTE(LOWORD(version));
-    return MAKEWORD(minorVersion, majorVersion);
-}
+#if !defined(ANGLE_COMPILE_OPTIMIZATION_LEVEL)
+// WARNING: D3DCOMPILE_OPTIMIZATION_LEVEL3 may lead to a DX9 shader compiler hang.
+// It should only be used selectively to work around specific bugs.
+#define ANGLE_COMPILE_OPTIMIZATION_LEVEL D3DCOMPILE_OPTIMIZATION_LEVEL1
+#endif
 
 namespace egl
 {
@@ -40,31 +34,35 @@ namespace gl
 {
 class InfoLog;
 class ProgramBinary;
-class VertexAttribute;
+struct LinkedVarying;
+struct VertexAttribute;
 class Buffer;
 class Texture;
 class Framebuffer;
+struct VertexAttribCurrentValueData;
 }
 
 namespace rx
 {
-class TextureStorageInterface2D;
-class TextureStorageInterfaceCube;
+class TextureStorage;
 class VertexBuffer;
 class IndexBuffer;
 class QueryImpl;
 class FenceImpl;
+class BufferImpl;
+class VertexArrayImpl;
 class BufferStorage;
-class Blit;
 struct TranslatedIndexData;
+class ShaderImpl;
+class ProgramImpl;
 class ShaderExecutable;
 class SwapChain;
 class RenderTarget;
 class Image;
 class TextureStorage;
-
-typedef void * ShaderBlob;
-typedef void (*pCompileFunc)();
+class UniformStorage;
+class TextureImpl;
+class TransformFeedbackImpl;
 
 struct ConfigDesc
 {
@@ -72,6 +70,7 @@ struct ConfigDesc
     GLenum  depthStencilFormat;
     GLint   multiSample;
     bool    fastConfig;
+    bool    es3Capable;
 };
 
 struct dx_VertexConstants
@@ -94,12 +93,6 @@ enum ShaderType
     SHADER_GEOMETRY
 };
 
-enum D3DWorkaroundType
-{
-    ANGLE_D3D_WORKAROUND_NONE,
-    ANGLE_D3D_WORKAROUND_SM3_OPTIMIZER
-};
-
 class Renderer
 {
   public:
@@ -116,30 +109,37 @@ class Renderer
 
     virtual SwapChain *createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat) = 0;
 
-    virtual void setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler) = 0;
-    virtual void setTexture(gl::SamplerType type, int index, gl::Texture *texture) = 0;
+    virtual gl::Error generateSwizzle(gl::Texture *texture) = 0;
+    virtual gl::Error setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler) = 0;
+    virtual gl::Error setTexture(gl::SamplerType type, int index, gl::Texture *texture) = 0;
+
+    virtual gl::Error setUniformBuffers(const gl::Buffer *vertexUniformBuffers[], const gl::Buffer *fragmentUniformBuffers[]) = 0;
 
-    virtual void setRasterizerState(const gl::RasterizerState &rasterState) = 0;
-    virtual void setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::Color &blendColor,
-                               unsigned int sampleMask) = 0;
-    virtual void setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
-                                      int stencilBackRef, bool frontFaceCCW) = 0;
+    virtual gl::Error setRasterizerState(const gl::RasterizerState &rasterState) = 0;
+    virtual gl::Error setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::ColorF &blendColor,
+                                    unsigned int sampleMask) = 0;
+    virtual gl::Error setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
+                                           int stencilBackRef, bool frontFaceCCW) = 0;
 
     virtual void setScissorRectangle(const gl::Rectangle &scissor, bool enabled) = 0;
-    virtual bool setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
+    virtual void setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
                              bool ignoreViewport) = 0;
 
-    virtual bool applyRenderTarget(gl::Framebuffer *frameBuffer) = 0;
-    virtual void applyShaders(gl::ProgramBinary *programBinary) = 0;
-    virtual void applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray *uniformArray) = 0;
+    virtual gl::Error applyRenderTarget(gl::Framebuffer *frameBuffer) = 0;
+    virtual gl::Error applyShaders(gl::ProgramBinary *programBinary, const gl::VertexFormat inputLayout[], const gl::Framebuffer *framebuffer,
+                                   bool rasterizerDiscard, bool transformFeedbackActive) = 0;
+    virtual gl::Error applyUniforms(const gl::ProgramBinary &programBinary) = 0;
     virtual bool applyPrimitiveType(GLenum primitiveType, GLsizei elementCount) = 0;
-    virtual GLenum applyVertexBuffer(gl::ProgramBinary *programBinary, gl::VertexAttribute vertexAttributes[], GLint first, GLsizei count, GLsizei instances) = 0;
-    virtual GLenum applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo) = 0;
+    virtual gl::Error applyVertexBuffer(gl::ProgramBinary *programBinary, const gl::VertexAttribute vertexAttributes[], const gl::VertexAttribCurrentValueData currentValues[],
+                                        GLint first, GLsizei count, GLsizei instances) = 0;
+    virtual gl::Error applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo) = 0;
+    virtual void applyTransformFeedbackBuffers(gl::Buffer *transformFeedbackBuffers[], GLintptr offsets[]) = 0;
 
-    virtual void drawArrays(GLenum mode, GLsizei count, GLsizei instances) = 0;
-    virtual void drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances) = 0;
+    virtual gl::Error drawArrays(GLenum mode, GLsizei count, GLsizei instances, bool transformFeedbackActive) = 0;
+    virtual gl::Error drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices,
+                                   gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances) = 0;
 
-    virtual void clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer) = 0;
+    virtual gl::Error clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer) = 0;
 
     virtual void markAllStateDirty() = 0;
 
@@ -149,102 +149,119 @@ class Renderer
     virtual bool testDeviceLost(bool notify) = 0;
     virtual bool testDeviceResettable() = 0;
 
-    // Renderer capabilities
+    // Renderer capabilities (virtual because it is used by egl::Display, do not override)
+    virtual const gl::Caps &getRendererCaps() const;
+    virtual const gl::TextureCapsMap &getRendererTextureCaps() const;
+    virtual const gl::Extensions &getRendererExtensions() const;
+
     virtual DWORD getAdapterVendor() const = 0;
     virtual std::string getRendererDescription() const = 0;
     virtual GUID getAdapterIdentifier() const = 0;
 
-    virtual bool getBGRATextureSupport() const = 0;
-    virtual bool getDXT1TextureSupport() = 0;
-    virtual bool getDXT3TextureSupport() = 0;
-    virtual bool getDXT5TextureSupport() = 0;
-    virtual bool getEventQuerySupport() = 0;
-    virtual bool getFloat32TextureSupport(bool *filtering, bool *renderable) = 0;
-    virtual bool getFloat16TextureSupport(bool *filtering, bool *renderable) = 0;
-    virtual bool getLuminanceTextureSupport() = 0;
-    virtual bool getLuminanceAlphaTextureSupport() = 0;
-    bool getVertexTextureSupport() const { return getMaxVertexTextureImageUnits() > 0; }
-    virtual unsigned int getMaxVertexTextureImageUnits() const = 0;
-    virtual unsigned int getMaxCombinedTextureImageUnits() const = 0;
     virtual unsigned int getReservedVertexUniformVectors() const = 0;
     virtual unsigned int getReservedFragmentUniformVectors() const = 0;
-    virtual unsigned int getMaxVertexUniformVectors() const = 0;
-    virtual unsigned int getMaxFragmentUniformVectors() const = 0;
-    virtual unsigned int getMaxVaryingVectors() const = 0;
-    virtual bool getNonPower2TextureSupport() const = 0;
-    virtual bool getDepthTextureSupport() const = 0;
-    virtual bool getOcclusionQuerySupport() const = 0;
-    virtual bool getInstancingSupport() const = 0;
-    virtual bool getTextureFilterAnisotropySupport() const = 0;
-    virtual float getTextureMaxAnisotropy() const = 0;
+    virtual unsigned int getReservedVertexUniformBuffers() const = 0;
+    virtual unsigned int getReservedFragmentUniformBuffers() const = 0;
     virtual bool getShareHandleSupport() const = 0;
-    virtual bool getDerivativeInstructionSupport() const = 0;
     virtual bool getPostSubBufferSupport() const = 0;
 
     virtual int getMajorShaderModel() const = 0;
-    virtual float getMaxPointSize() const = 0;
-    virtual int getMaxViewportDimension() const = 0;
-    virtual int getMaxTextureWidth() const = 0;
-    virtual int getMaxTextureHeight() const = 0;
-    virtual bool get32BitIndexSupport() const = 0;
     virtual int getMinSwapInterval() const = 0;
     virtual int getMaxSwapInterval() const = 0;
 
-    virtual GLsizei getMaxSupportedSamples() const = 0;
-
-    virtual unsigned int getMaxRenderTargets() const = 0;
-
     // Pixel operations
-    virtual bool copyToRenderTarget(TextureStorageInterface2D *dest, TextureStorageInterface2D *source) = 0;
-    virtual bool copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureStorageInterfaceCube *source) = 0;
-
-    virtual bool copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level) = 0;
-    virtual bool copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level) = 0;
+    virtual bool copyToRenderTarget2D(TextureStorage *dest, TextureStorage *source) = 0;
+    virtual bool copyToRenderTargetCube(TextureStorage *dest, TextureStorage *source) = 0;
+    virtual bool copyToRenderTarget3D(TextureStorage *dest, TextureStorage *source) = 0;
+    virtual bool copyToRenderTarget2DArray(TextureStorage *dest, TextureStorage *source) = 0;
+
+    virtual bool copyImage2D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level) = 0;
+    virtual bool copyImageCube(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                               GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level) = 0;
+    virtual bool copyImage3D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level) = 0;
+    virtual bool copyImage2DArray(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                                  GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level) = 0;
 
     virtual bool blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
-                          bool blitRenderTarget, bool blitDepthStencil) = 0;
-    virtual void readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type,
-                            GLsizei outputPitch, bool packReverseRowOrder, GLint packAlignment, void* pixels) = 0;
+                          const gl::Rectangle *scissor, bool blitRenderTarget, bool blitDepth, bool blitStencil, GLenum filter) = 0;
+
+    virtual gl::Error readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format,
+                                 GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels) = 0;
 
     // RenderTarget creation
     virtual RenderTarget *createRenderTarget(SwapChain *swapChain, bool depth) = 0;
-    virtual RenderTarget *createRenderTarget(int width, int height, GLenum format, GLsizei samples, bool depth) = 0;
+    virtual RenderTarget *createRenderTarget(int width, int height, GLenum format, GLsizei samples) = 0;
+
+    // Shader creation
+    virtual ShaderImpl *createShader(GLenum type) = 0;
+    virtual ProgramImpl *createProgram() = 0;
 
     // Shader operations
-    virtual ShaderExecutable *loadExecutable(const void *function, size_t length, rx::ShaderType type) = 0;
-    virtual ShaderExecutable *compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type, D3DWorkaroundType workaround) = 0;
+    virtual void releaseShaderCompiler() = 0;
+    virtual ShaderExecutable *loadExecutable(const void *function, size_t length, rx::ShaderType type,
+                                             const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                             bool separatedOutputBuffers) = 0;
+    virtual ShaderExecutable *compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type,
+                                                  const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                                  bool separatedOutputBuffers, D3DWorkaroundType workaround) = 0;
+    virtual UniformStorage *createUniformStorage(size_t storageSize) = 0;
 
     // Image operations
     virtual Image *createImage() = 0;
     virtual void generateMipmap(Image *dest, Image *source) = 0;
     virtual TextureStorage *createTextureStorage2D(SwapChain *swapChain) = 0;
-    virtual TextureStorage *createTextureStorage2D(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height) = 0;
-    virtual TextureStorage *createTextureStorageCube(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size) = 0;
+    virtual TextureStorage *createTextureStorage2D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels) = 0;
+    virtual TextureStorage *createTextureStorageCube(GLenum internalformat, bool renderTarget, int size, int levels) = 0;
+    virtual TextureStorage *createTextureStorage3D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels) = 0;
+    virtual TextureStorage *createTextureStorage2DArray(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels) = 0;
+
+    // Texture creation
+    virtual TextureImpl *createTexture(GLenum target) = 0;
 
     // Buffer creation
+    virtual BufferImpl *createBuffer() = 0;
     virtual VertexBuffer *createVertexBuffer() = 0;
     virtual IndexBuffer *createIndexBuffer() = 0;
-    virtual BufferStorage *createBufferStorage() = 0;
+
+    // Vertex Array creation
+    virtual VertexArrayImpl *createVertexArray() = 0;
 
     // Query and Fence creation
     virtual QueryImpl *createQuery(GLenum type) = 0;
     virtual FenceImpl *createFence() = 0;
 
+    // Transform Feedback creation
+    virtual TransformFeedbackImpl* createTransformFeedback() = 0;
+
+    // Current GLES client version
+    void setCurrentClientVersion(int clientVersion) { mCurrentClientVersion = clientVersion; }
+    int getCurrentClientVersion() const { return mCurrentClientVersion; }
+
+    // Buffer-to-texture and Texture-to-buffer copies
+    virtual bool supportsFastCopyBufferToTexture(GLenum internalFormat) const = 0;
+    virtual bool fastCopyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                                         GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea) = 0;
+
     virtual bool getLUID(LUID *adapterLuid) const = 0;
+    virtual rx::VertexConversionType getVertexConversionType(const gl::VertexFormat &vertexFormat) const = 0;
+    virtual GLenum getVertexComponentType(const gl::VertexFormat &vertexFormat) const = 0;
 
   protected:
-    bool initializeCompiler();
-    ShaderBlob *compileToBinary(gl::InfoLog &infoLog, const char *hlsl, const char *profile, UINT optimizationFlags, bool alternateFlags);
-
     egl::Display *mDisplay;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Renderer);
 
-    HMODULE mD3dCompilerModule;
-    pCompileFunc mD3DCompileFunc;
+    virtual void generateCaps(gl::Caps *outCaps, gl::TextureCapsMap* outTextureCaps, gl::Extensions *outExtensions) const = 0;
+
+    mutable bool mCapsInitialized;
+    mutable gl::Caps mCaps;
+    mutable gl::TextureCapsMap mTextureCaps;
+    mutable gl::Extensions mExtensions;
+
+    int mCurrentClientVersion;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/ShaderExecutable.h b/src/3rdparty/angle/src/libGLESv2/renderer/ShaderExecutable.h
index 293e340845..f17195673d 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/ShaderExecutable.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/ShaderExecutable.h
@@ -11,6 +11,10 @@
 #define LIBGLESV2_RENDERER_SHADEREXECUTABLE_H_
 
 #include "common/angleutils.h"
+#include "common/debug.h"
+
+#include <vector>
+#include <cstdint>
 
 namespace rx
 {
@@ -18,32 +22,44 @@ namespace rx
 class ShaderExecutable
 {
   public:
-    ShaderExecutable(const void *function, size_t length) : mLength(length)
-    {
-        mFunction = new char[length];
-        memcpy(mFunction, function, length);
-    }
-    
-    virtual ~ShaderExecutable()
+    ShaderExecutable(const void *function, size_t length)
+        : mFunctionBuffer(length)
     {
-        delete[] mFunction;
+        memcpy(mFunctionBuffer.data(), function, length);
     }
 
-    void *getFunction() const
+    virtual ~ShaderExecutable() {}
+
+    const uint8_t *getFunction() const
     {
-        return mFunction;
+        return mFunctionBuffer.data();
     }
 
     size_t getLength() const
     {
-        return mLength;
+        return mFunctionBuffer.size();
     }
 
   private:
     DISALLOW_COPY_AND_ASSIGN(ShaderExecutable);
 
-    void *mFunction;
-    const size_t mLength;
+    std::vector<uint8_t> mFunctionBuffer;
+};
+
+class UniformStorage
+{
+  public:
+    UniformStorage(size_t initialSize)
+        : mSize(initialSize)
+    {
+    }
+
+    virtual ~UniformStorage() {}
+
+    size_t size() const { return mSize; }
+
+  private:
+    size_t mSize;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/ShaderImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/ShaderImpl.h
new file mode 100644
index 0000000000..de5d30e6fe
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/ShaderImpl.h
@@ -0,0 +1,54 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ShaderImpl.h: Defines the abstract rx::ShaderImpl class.
+
+#ifndef LIBGLESV2_RENDERER_SHADERIMPL_H_
+#define LIBGLESV2_RENDERER_SHADERIMPL_H_
+
+#include <vector>
+
+#include "common/angleutils.h"
+#include "libGLESv2/Shader.h"
+
+namespace rx
+{
+
+class ShaderImpl
+{
+  public:
+    ShaderImpl() { }
+    virtual ~ShaderImpl() { }
+
+    virtual bool compile(const std::string &source) = 0;
+    virtual const std::string &getInfoLog() const = 0;
+    virtual const std::string &getTranslatedSource() const = 0;
+
+    const std::vector<gl::PackedVarying> &getVaryings() const { return mVaryings; }
+    const std::vector<sh::Uniform> &getUniforms() const { return mUniforms; }
+    const std::vector<sh::InterfaceBlock> &getInterfaceBlocks() const  { return mInterfaceBlocks; }
+    const std::vector<sh::Attribute> &getActiveAttributes() const { return mActiveAttributes; }
+    const std::vector<sh::Attribute> &getActiveOutputVariables() const { return mActiveOutputVariables; }
+
+    std::vector<gl::PackedVarying> &getVaryings() { return mVaryings; }
+    std::vector<sh::Uniform> &getUniforms() { return mUniforms; }
+    std::vector<sh::InterfaceBlock> &getInterfaceBlocks() { return mInterfaceBlocks; }
+    std::vector<sh::Attribute> &getActiveAttributes() { return mActiveAttributes; }
+    std::vector<sh::Attribute> &getActiveOutputVariables() { return mActiveOutputVariables; }
+
+  protected:
+    DISALLOW_COPY_AND_ASSIGN(ShaderImpl);
+
+    std::vector<gl::PackedVarying> mVaryings;
+    std::vector<sh::Uniform> mUniforms;
+    std::vector<sh::InterfaceBlock> mInterfaceBlocks;
+    std::vector<sh::Attribute> mActiveAttributes;
+    std::vector<sh::Attribute> mActiveOutputVariables;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_SHADERIMPL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h b/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
index 8231fbcb25..1ec702f299 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
@@ -1,4 +1,3 @@
-#include "../precompiled.h"
 //
 // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -12,14 +11,23 @@
 #define LIBGLESV2_RENDERER_SWAPCHAIN_H_
 
 #include "common/angleutils.h"
+#include "common/platform.h"
 
-#if !defined(ANGLE_FORCE_VSYNC_OFF)
-#define ANGLE_FORCE_VSYNC_OFF 0
-#endif
+#include <GLES2/gl2.h>
+#include <EGL/egl.h>
+#include <EGL/eglplatform.h>
 
 namespace rx
 {
 
+enum SwapFlags
+{
+    SWAP_NORMAL = 0,
+    SWAP_ROTATE_90 = 1,
+    SWAP_ROTATE_270 = 2,
+    SWAP_ROTATE_180 = SWAP_ROTATE_90|SWAP_ROTATE_270,
+};
+
 class SwapChain
 {
   public:
@@ -32,13 +40,13 @@ class SwapChain
 
     virtual EGLint resize(EGLint backbufferWidth, EGLint backbufferSize) = 0;
     virtual EGLint reset(EGLint backbufferWidth, EGLint backbufferHeight, EGLint swapInterval) = 0;
-    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height) = 0;
+    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint flags) = 0;
     virtual void recreate() = 0;
 
     virtual HANDLE getShareHandle() {return mShareHandle;};
 
   protected:
-    const EGLNativeWindowType mWindow;  // Window that the surface is created for.
+    const EGLNativeWindowType mWindow;            // Window that the surface is created for.
     const GLenum mBackBufferFormat;
     const GLenum mDepthBufferFormat;
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/TextureImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/TextureImpl.h
new file mode 100644
index 0000000000..e3cc50d680
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/TextureImpl.h
@@ -0,0 +1,70 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureImpl.h: Defines the abstract rx::TextureImpl classes.
+
+#ifndef LIBGLESV2_RENDERER_TEXTUREIMPL_H_
+#define LIBGLESV2_RENDERER_TEXTUREIMPL_H_
+
+#include "common/angleutils.h"
+
+#include "angle_gl.h"
+
+#include "libGLESv2/ImageIndex.h"
+
+namespace egl
+{
+class Surface;
+}
+
+namespace gl
+{
+class Framebuffer;
+struct PixelUnpackState;
+struct SamplerState;
+}
+
+namespace rx
+{
+
+class Image;
+class Renderer;
+class TextureStorage;
+
+class TextureImpl
+{
+  public:
+    virtual ~TextureImpl() {};
+
+    // TODO: If this methods could go away that would be ideal;
+    // TextureStorage should only be necessary for the D3D backend, and as such
+    // higher level code should not rely on it.
+    virtual TextureStorage *getNativeTexture() = 0;
+
+    // Deprecated in favour of the ImageIndex method
+    virtual Image *getImage(int level, int layer) const = 0;
+    virtual Image *getImage(const gl::ImageIndex &index) const = 0;
+    virtual GLsizei getLayerCount(int level) const = 0;
+
+    virtual void setUsage(GLenum usage) = 0;
+
+    virtual void setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels) = 0;
+    virtual void setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels) = 0;
+    virtual void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels) = 0;
+    virtual void subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels) = 0;
+    virtual void copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source) = 0;
+    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source) = 0;
+    virtual void storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth) = 0;
+
+    virtual void generateMipmaps() = 0;
+
+    virtual void bindTexImage(egl::Surface *surface) = 0;
+    virtual void releaseTexImage() = 0;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_TEXTUREIMPL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/TextureStorage.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/TextureStorage.cpp
deleted file mode 100644
index 00b316f1cc..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/TextureStorage.cpp
+++ /dev/null
@@ -1,122 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// TextureStorage.cpp: Implements the abstract rx::TextureStorageInterface class and its concrete derived
-// classes TextureStorageInterface2D and TextureStorageInterfaceCube, which act as the interface to the
-// GPU-side texture.
-
-#include "libGLESv2/renderer/TextureStorage.h"
-#include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/Renderbuffer.h"
-#include "libGLESv2/Texture.h"
-
-#include "common/debug.h"
-
-namespace rx
-{
-unsigned int TextureStorageInterface::mCurrentTextureSerial = 1;
-
-TextureStorageInterface::TextureStorageInterface()
-    : mTextureSerial(issueTextureSerial()),
-      mInstance(NULL)
-{
-}
-
-TextureStorageInterface::~TextureStorageInterface()
-{
-    delete mInstance;
-}
-
-bool TextureStorageInterface::isRenderTarget() const
-{
-    return mInstance->isRenderTarget();
-}
-
-
-bool TextureStorageInterface::isManaged() const
-{
-    return mInstance->isManaged();
-}
-
-unsigned int TextureStorageInterface::getTextureSerial() const
-{
-    return mTextureSerial;
-}
-
-unsigned int TextureStorageInterface::issueTextureSerial()
-{
-    return mCurrentTextureSerial++;
-}
-
-int TextureStorageInterface::getLodOffset() const
-{
-    return mInstance->getLodOffset();
-}
-
-
-int TextureStorageInterface::levelCount()
-{
-    return mInstance->levelCount();
-}
-
-TextureStorageInterface2D::TextureStorageInterface2D(Renderer *renderer, SwapChain *swapchain) 
-    : mRenderTargetSerial(gl::RenderbufferStorage::issueSerial())
-{
-    mInstance = renderer->createTextureStorage2D(swapchain);
-}
-
-TextureStorageInterface2D::TextureStorageInterface2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height)
-    : mRenderTargetSerial(gl::RenderbufferStorage::issueSerial())
-{
-    mInstance = renderer->createTextureStorage2D(levels, internalformat, usage, forceRenderable, width, height);
-}
-
-TextureStorageInterface2D::~TextureStorageInterface2D()
-{
-}
-
-RenderTarget *TextureStorageInterface2D::getRenderTarget() const
-{
-    return mInstance->getRenderTarget();
-}
-
-void TextureStorageInterface2D::generateMipmap(int level)
-{
-    mInstance->generateMipmap(level);
-}
-
-unsigned int TextureStorageInterface2D::getRenderTargetSerial(GLenum target) const
-{
-    return mRenderTargetSerial;
-}
-
-TextureStorageInterfaceCube::TextureStorageInterfaceCube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size)
-    : mFirstRenderTargetSerial(gl::RenderbufferStorage::issueCubeSerials())
-{
-    mInstance = renderer->createTextureStorageCube(levels, internalformat, usage, forceRenderable, size);
-}
-
-TextureStorageInterfaceCube::~TextureStorageInterfaceCube()
-{
-}
-
-RenderTarget *TextureStorageInterfaceCube::getRenderTarget(GLenum faceTarget) const
-{
-    return mInstance->getRenderTarget(faceTarget);
-}
-
-void TextureStorageInterfaceCube::generateMipmap(int face, int level)
-{
-    mInstance->generateMipmap(face, level);
-}
-
-unsigned int TextureStorageInterfaceCube::getRenderTargetSerial(GLenum target) const
-{
-    return mFirstRenderTargetSerial + gl::TextureCubeMap::faceIndex(target);
-}
-
-}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/TextureStorage.h b/src/3rdparty/angle/src/libGLESv2/renderer/TextureStorage.h
deleted file mode 100644
index edddb75f3f..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/TextureStorage.h
+++ /dev/null
@@ -1,110 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// TextureStorage.h: Defines the abstract rx::TextureStorageInterface class and its concrete derived
-// classes TextureStorageInterface2D and TextureStorageInterfaceCube, which act as the interface to the
-// GPU-side texture.
-
-#ifndef LIBGLESV2_RENDERER_TEXTURESTORAGE_H_
-#define LIBGLESV2_RENDERER_TEXTURESTORAGE_H_
-
-#include "common/debug.h"
-
-namespace rx
-{
-class Renderer;
-class SwapChain;
-class RenderTarget;
-class Blit;
-
-class TextureStorage
-{
-  public:
-    TextureStorage() {};
-    virtual ~TextureStorage() {};
-
-    virtual int getLodOffset() const = 0;
-    virtual bool isRenderTarget() const = 0;
-    virtual bool isManaged() const = 0;
-    virtual int levelCount() = 0;
-
-    virtual RenderTarget *getRenderTarget() = 0;
-    virtual RenderTarget *getRenderTarget(GLenum faceTarget) = 0;
-    virtual void generateMipmap(int level) = 0;
-    virtual void generateMipmap(int face, int level) = 0;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorage);
-
-};
-
-class TextureStorageInterface
-{
-  public:
-    TextureStorageInterface();
-    virtual ~TextureStorageInterface();
-
-    TextureStorage *getStorageInstance() { return mInstance; }
-
-    unsigned int getTextureSerial() const;
-    virtual unsigned int getRenderTargetSerial(GLenum target) const = 0;
-
-    virtual int getLodOffset() const;
-    virtual bool isRenderTarget() const;
-    virtual bool isManaged() const;
-    virtual int levelCount();
-
-  protected:
-    TextureStorage *mInstance;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorageInterface);
-
-    const unsigned int mTextureSerial;
-    static unsigned int issueTextureSerial();
-
-    static unsigned int mCurrentTextureSerial;
-};
-
-class TextureStorageInterface2D : public TextureStorageInterface
-{
-  public:
-    TextureStorageInterface2D(Renderer *renderer, SwapChain *swapchain);
-    TextureStorageInterface2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height);
-    virtual ~TextureStorageInterface2D();
-
-    void generateMipmap(int level);
-    RenderTarget *getRenderTarget() const;
-
-    virtual unsigned int getRenderTargetSerial(GLenum target) const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorageInterface2D);
-
-    const unsigned int mRenderTargetSerial;
-};
-
-class TextureStorageInterfaceCube : public TextureStorageInterface
-{
-  public:
-    TextureStorageInterfaceCube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size);
-    virtual ~TextureStorageInterfaceCube();
-
-    void generateMipmap(int face, int level);
-    RenderTarget *getRenderTarget(GLenum faceTarget) const;
-
-    virtual unsigned int getRenderTargetSerial(GLenum target) const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorageInterfaceCube);
-
-    const unsigned int mFirstRenderTargetSerial;
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_TEXTURESTORAGE_H_
-
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/TransformFeedbackImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/TransformFeedbackImpl.h
new file mode 100644
index 0000000000..8425604d87
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/TransformFeedbackImpl.h
@@ -0,0 +1,31 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TransformFeedbackImpl.h: Defines the abstract rx::TransformFeedbackImpl class.
+
+#ifndef LIBGLESV2_RENDERER_TRANSFORMFEEDBACKIMPL_H_
+#define LIBGLESV2_RENDERER_TRANSFORMFEEDBACKIMPL_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/TransformFeedback.h"
+
+namespace rx
+{
+
+class TransformFeedbackImpl
+{
+  public:
+    virtual ~TransformFeedbackImpl() { }
+
+    virtual void begin(GLenum primitiveMode) = 0;
+    virtual void end() = 0;
+    virtual void pause() = 0;
+    virtual void resume() = 0;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_TRANSFORMFEEDBACKIMPL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/VertexArrayImpl.h b/src/3rdparty/angle/src/libGLESv2/renderer/VertexArrayImpl.h
new file mode 100644
index 0000000000..b013f9cdf4
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/VertexArrayImpl.h
@@ -0,0 +1,32 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexAttribImpl.h: Defines the abstract rx::VertexAttribImpl class.
+
+#ifndef LIBGLESV2_RENDERER_VERTEXARRAYIMPL_H_
+#define LIBGLESV2_RENDERER_VERTEXARRAYIMPL_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/VertexAttribute.h"
+
+namespace rx
+{
+
+class VertexArrayImpl
+{
+  public:
+    virtual ~VertexArrayImpl() { }
+
+    virtual void setElementArrayBuffer(const gl::Buffer *buffer) = 0;
+    virtual void setAttribute(size_t idx, const gl::VertexAttribute &attr) = 0;
+    virtual void setAttributeDivisor(size_t idx, GLuint divisor) = 0;
+    virtual void enableAttribute(size_t idx, bool enabledState) = 0;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_VERTEXARRAYIMPL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/VertexBuffer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/VertexBuffer.cpp
deleted file mode 100644
index a073d95033..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/VertexBuffer.cpp
+++ /dev/null
@@ -1,292 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexBuffer.cpp: Defines the abstract VertexBuffer class and VertexBufferInterface
-// class with derivations, classes that perform graphics API agnostic vertex buffer operations.
-
-#include "libGLESv2/renderer/VertexBuffer.h"
-#include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/Context.h"
-
-namespace rx
-{
-
-unsigned int VertexBuffer::mNextSerial = 1;
-
-VertexBuffer::VertexBuffer()
-{
-    updateSerial();
-}
-
-VertexBuffer::~VertexBuffer()
-{
-}
-
-void VertexBuffer::updateSerial()
-{
-    mSerial = mNextSerial++;
-}
-
-unsigned int VertexBuffer::getSerial() const
-{
-    return mSerial;
-}
-
-VertexBufferInterface::VertexBufferInterface(rx::Renderer *renderer, bool dynamic) : mRenderer(renderer)
-{
-    mDynamic = dynamic;
-    mWritePosition = 0;
-    mReservedSpace = 0;
-
-    mVertexBuffer = renderer->createVertexBuffer();
-}
-
-VertexBufferInterface::~VertexBufferInterface()
-{
-    delete mVertexBuffer;
-}
-
-unsigned int VertexBufferInterface::getSerial() const
-{
-    return mVertexBuffer->getSerial();
-}
-
-unsigned int VertexBufferInterface::getBufferSize() const
-{
-    return mVertexBuffer->getBufferSize();
-}
-
-bool VertexBufferInterface::setBufferSize(unsigned int size)
-{
-    if (mVertexBuffer->getBufferSize() == 0)
-    {
-        return mVertexBuffer->initialize(size, mDynamic);
-    }
-    else
-    {
-        return mVertexBuffer->setBufferSize(size);
-    }
-}
-
-unsigned int VertexBufferInterface::getWritePosition() const
-{
-    return mWritePosition;
-}
-
-void VertexBufferInterface::setWritePosition(unsigned int writePosition)
-{
-    mWritePosition = writePosition;
-}
-
-bool VertexBufferInterface::discard()
-{
-    return mVertexBuffer->discard();
-}
-
-bool VertexBufferInterface::storeVertexAttributes(const gl::VertexAttribute &attrib,  GLint start, GLsizei count, GLsizei instances,
-                                                  unsigned int *outStreamOffset)
-{
-    unsigned int spaceRequired;
-    if (!mVertexBuffer->getSpaceRequired(attrib, count, instances, &spaceRequired))
-    {
-        return false;
-    }
-
-    if (mWritePosition + spaceRequired < mWritePosition)
-    {
-        return false;
-    }
-
-    if (!reserveSpace(mReservedSpace))
-    {
-        return false;
-    }
-    mReservedSpace = 0;
-
-    if (!mVertexBuffer->storeVertexAttributes(attrib, start, count, instances, mWritePosition))
-    {
-        return false;
-    }
-
-    if (outStreamOffset)
-    {
-        *outStreamOffset = mWritePosition;
-    }
-
-    mWritePosition += spaceRequired;
-
-    return true;
-}
-
-bool VertexBufferInterface::storeRawData(const void* data, unsigned int size, unsigned int *outStreamOffset)
-{
-    if (mWritePosition + size < mWritePosition)
-    {
-        return false;
-    }
-
-    if (!reserveSpace(mReservedSpace))
-    {
-        return false;
-    }
-    mReservedSpace = 0;
-
-    if (!mVertexBuffer->storeRawData(data, size, mWritePosition))
-    {
-        return false;
-    }
-
-    if (outStreamOffset)
-    {
-        *outStreamOffset = mWritePosition;
-    }
-
-    mWritePosition += size;
-
-    return true;
-}
-
-bool VertexBufferInterface::reserveVertexSpace(const gl::VertexAttribute &attribute, GLsizei count, GLsizei instances)
-{
-    unsigned int requiredSpace;
-    if (!mVertexBuffer->getSpaceRequired(attribute, count, instances, &requiredSpace))
-    {
-        return false;
-    }
-
-    // Protect against integer overflow
-    if (mReservedSpace + requiredSpace < mReservedSpace)
-    {
-         return false;
-    }
-
-    mReservedSpace += requiredSpace;
-    return true;
-}
-
-bool VertexBufferInterface::reserveRawDataSpace(unsigned int size)
-{
-    // Protect against integer overflow
-    if (mReservedSpace + size < mReservedSpace)
-    {
-         return false;
-    }
-
-    mReservedSpace += size;
-    return true;
-}
-
-VertexBuffer* VertexBufferInterface::getVertexBuffer() const
-{
-    return mVertexBuffer;
-}
-
-
-StreamingVertexBufferInterface::StreamingVertexBufferInterface(rx::Renderer *renderer, std::size_t initialSize) : VertexBufferInterface(renderer, true)
-{
-    setBufferSize(initialSize);
-}
-
-StreamingVertexBufferInterface::~StreamingVertexBufferInterface()
-{
-}
-
-bool StreamingVertexBufferInterface::reserveSpace(unsigned int size)
-{
-    bool result = true;
-    unsigned int curBufferSize = getBufferSize();
-    if (size > curBufferSize)
-    {
-        result = setBufferSize(std::max(size, 3 * curBufferSize / 2));
-        setWritePosition(0);
-    }
-    else if (getWritePosition() + size > curBufferSize)
-    {
-        if (!discard())
-        {
-            return false;
-        }
-        setWritePosition(0);
-    }
-
-    return result;
-}
-
-StaticVertexBufferInterface::StaticVertexBufferInterface(rx::Renderer *renderer) : VertexBufferInterface(renderer, false)
-{
-}
-
-StaticVertexBufferInterface::~StaticVertexBufferInterface()
-{
-}
-
-bool StaticVertexBufferInterface::lookupAttribute(const gl::VertexAttribute &attribute, unsigned int *outStreamOffset)
-{
-    for (unsigned int element = 0; element < mCache.size(); element++)
-    {
-        if (mCache[element].type == attribute.mType &&
-            mCache[element].size == attribute.mSize &&
-            mCache[element].stride == attribute.stride() &&
-            mCache[element].normalized == attribute.mNormalized)
-        {
-            if (mCache[element].attributeOffset == attribute.mOffset % attribute.stride())
-            {
-                if (outStreamOffset)
-                {
-                    *outStreamOffset = mCache[element].streamOffset;
-                }
-                return true;
-            }
-        }
-    }
-
-    return false;
-}
-
-bool StaticVertexBufferInterface::reserveSpace(unsigned int size)
-{
-    unsigned int curSize = getBufferSize();
-    if (curSize == 0)
-    {
-        setBufferSize(size);
-        return true;
-    }
-    else if (curSize >= size)
-    {
-        return true;
-    }
-    else
-    {
-        UNREACHABLE();   // Static vertex buffers can't be resized
-        return false;
-    }
-}
-
-bool StaticVertexBufferInterface::storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count, GLsizei instances,
-                                                        unsigned int *outStreamOffset)
-{
-    unsigned int streamOffset;
-    if (VertexBufferInterface::storeVertexAttributes(attrib, start, count, instances, &streamOffset))
-    {
-        int attributeOffset = attrib.mOffset % attrib.stride();
-        VertexElement element = { attrib.mType, attrib.mSize, attrib.stride(), attrib.mNormalized, attributeOffset, streamOffset };
-        mCache.push_back(element);
-
-        if (outStreamOffset)
-        {
-            *outStreamOffset = streamOffset;
-        }
-
-        return true;
-    }
-    else
-    {
-        return false;
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/VertexDataManager.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/VertexDataManager.cpp
deleted file mode 100644
index 8034aed8c9..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/VertexDataManager.cpp
+++ /dev/null
@@ -1,304 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexDataManager.h: Defines the VertexDataManager, a class that
-// runs the Buffer translation process.
-
-#include "libGLESv2/renderer/VertexDataManager.h"
-#include "libGLESv2/renderer/BufferStorage.h"
-
-#include "libGLESv2/Buffer.h"
-#include "libGLESv2/ProgramBinary.h"
-#include "libGLESv2/Context.h"
-#include "libGLESv2/renderer/VertexBuffer.h"
-
-namespace
-{
-    enum { INITIAL_STREAM_BUFFER_SIZE = 1024*1024 };
-    // This has to be at least 4k or else it fails on ATI cards.
-    enum { CONSTANT_VERTEX_BUFFER_SIZE = 4096 };
-}
-
-namespace rx
-{
-
-static int elementsInBuffer(const gl::VertexAttribute &attribute, unsigned int size)
-{
-    // Size cannot be larger than a GLsizei
-    if (size > static_cast<unsigned int>(std::numeric_limits<int>::max()))
-    {
-        size = static_cast<unsigned int>(std::numeric_limits<int>::max());
-    }
-
-    GLsizei stride = attribute.stride();
-    return (size - attribute.mOffset % stride + (stride - attribute.typeSize())) / stride;
-}
-
-static int StreamingBufferElementCount(const gl::VertexAttribute &attribute, int vertexDrawCount, int instanceDrawCount)
-{
-    // For instanced rendering, we draw "instanceDrawCount" sets of "vertexDrawCount" vertices.
-    //
-    // A vertex attribute with a positive divisor loads one instanced vertex for every set of
-    // non-instanced vertices, and the instanced vertex index advances once every "mDivisor" instances.
-    if (instanceDrawCount > 0 && attribute.mDivisor > 0)
-    {
-        return instanceDrawCount / attribute.mDivisor;
-    }
-
-    return vertexDrawCount;
-}
-
-VertexDataManager::VertexDataManager(Renderer *renderer) : mRenderer(renderer)
-{
-    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
-    {
-        mCurrentValue[i][0] = std::numeric_limits<float>::quiet_NaN();
-        mCurrentValue[i][1] = std::numeric_limits<float>::quiet_NaN();
-        mCurrentValue[i][2] = std::numeric_limits<float>::quiet_NaN();
-        mCurrentValue[i][3] = std::numeric_limits<float>::quiet_NaN();
-        mCurrentValueBuffer[i] = NULL;
-        mCurrentValueOffsets[i] = 0;
-    }
-
-    mStreamingBuffer = new StreamingVertexBufferInterface(renderer, INITIAL_STREAM_BUFFER_SIZE);
-
-    if (!mStreamingBuffer)
-    {
-        ERR("Failed to allocate the streaming vertex buffer.");
-    }
-}
-
-VertexDataManager::~VertexDataManager()
-{
-    delete mStreamingBuffer;
-
-    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
-    {
-        delete mCurrentValueBuffer[i];
-    }
-}
-
-static bool directStoragePossible(VertexBufferInterface* vb, const gl::VertexAttribute& attrib)
-{
-    gl::Buffer *buffer = attrib.mBoundBuffer.get();
-    BufferStorage *storage = buffer ? buffer->getStorage() : NULL;
-
-    const bool isAligned = (attrib.stride() % 4 == 0) && (attrib.mOffset % 4 == 0);
-
-    return storage && storage->supportsDirectBinding() && !vb->getVertexBuffer()->requiresConversion(attrib) && isAligned;
-}
-
-GLenum VertexDataManager::prepareVertexData(const gl::VertexAttribute attribs[], gl::ProgramBinary *programBinary, GLint start, GLsizei count, TranslatedAttribute *translated, GLsizei instances)
-{
-    if (!mStreamingBuffer)
-    {
-        return GL_OUT_OF_MEMORY;
-    }
-
-    for (int attributeIndex = 0; attributeIndex < gl::MAX_VERTEX_ATTRIBS; attributeIndex++)
-    {
-        translated[attributeIndex].active = (programBinary->getSemanticIndex(attributeIndex) != -1);
-    }
-
-    // Invalidate static buffers that don't contain matching attributes
-    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
-    {
-        if (translated[i].active && attribs[i].mArrayEnabled)
-        {
-            gl::Buffer *buffer = attribs[i].mBoundBuffer.get();
-            StaticVertexBufferInterface *staticBuffer = buffer ? buffer->getStaticVertexBuffer() : NULL;
-
-            if (staticBuffer && staticBuffer->getBufferSize() > 0 && !staticBuffer->lookupAttribute(attribs[i], NULL) &&
-                !directStoragePossible(staticBuffer, attribs[i]))
-            {
-                buffer->invalidateStaticData();
-            }
-        }
-    }
-
-    // Reserve the required space in the buffers
-    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
-    {
-        if (translated[i].active && attribs[i].mArrayEnabled)
-        {
-            gl::Buffer *buffer = attribs[i].mBoundBuffer.get();
-            StaticVertexBufferInterface *staticBuffer = buffer ? buffer->getStaticVertexBuffer() : NULL;
-            VertexBufferInterface *vertexBuffer = staticBuffer ? staticBuffer : static_cast<VertexBufferInterface*>(mStreamingBuffer);
-
-            if (!directStoragePossible(vertexBuffer, attribs[i]))
-            {
-                if (staticBuffer)
-                {
-                    if (staticBuffer->getBufferSize() == 0)
-                    {
-                        int totalCount = elementsInBuffer(attribs[i], buffer->size());
-                        if (!staticBuffer->reserveVertexSpace(attribs[i], totalCount, 0))
-                        {
-                            return GL_OUT_OF_MEMORY;
-                        }
-                    }
-                }
-                else
-                {
-                    int totalCount = StreamingBufferElementCount(attribs[i], count, instances);
-
-                    // Undefined behaviour:
-                    // We can return INVALID_OPERATION if our vertex attribute does not have enough backing data.
-                    if (buffer && elementsInBuffer(attribs[i], buffer->size()) < totalCount)
-                    {
-                        return GL_INVALID_OPERATION;
-                    }
-
-                    if (!mStreamingBuffer->reserveVertexSpace(attribs[i], totalCount, instances))
-                    {
-                        return GL_OUT_OF_MEMORY;
-                    }
-                }
-            }
-        }
-    }
-
-    // Perform the vertex data translations
-    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
-    {
-        if (translated[i].active)
-        {
-            if (attribs[i].mArrayEnabled)
-            {
-                gl::Buffer *buffer = attribs[i].mBoundBuffer.get();
-
-                if (!buffer && attribs[i].mPointer == NULL)
-                {
-                    // This is an application error that would normally result in a crash, but we catch it and return an error
-                    ERR("An enabled vertex array has no buffer and no pointer.");
-                    return GL_INVALID_OPERATION;
-                }
-
-                StaticVertexBufferInterface *staticBuffer = buffer ? buffer->getStaticVertexBuffer() : NULL;
-                VertexBufferInterface *vertexBuffer = staticBuffer ? staticBuffer : static_cast<VertexBufferInterface*>(mStreamingBuffer);
-
-                BufferStorage *storage = buffer ? buffer->getStorage() : NULL;
-                bool directStorage = directStoragePossible(vertexBuffer, attribs[i]);
-
-                unsigned int streamOffset = 0;
-                unsigned int outputElementSize = 0;
-
-                if (directStorage)
-                {
-                    outputElementSize = attribs[i].stride();
-                    streamOffset = attribs[i].mOffset + outputElementSize * start;
-                    storage->markBufferUsage();
-                }
-                else if (staticBuffer)
-                {
-                    if (!staticBuffer->getVertexBuffer()->getSpaceRequired(attribs[i], 1, 0, &outputElementSize))
-                    {
-                        return GL_OUT_OF_MEMORY;
-                    }
-
-                    if (!staticBuffer->lookupAttribute(attribs[i], &streamOffset))
-                    {
-                        // Convert the entire buffer
-                        int totalCount = elementsInBuffer(attribs[i], storage->getSize());
-                        int startIndex = attribs[i].mOffset / attribs[i].stride();
-
-                        if (!staticBuffer->storeVertexAttributes(attribs[i], -startIndex, totalCount, 0, &streamOffset))
-                        {
-                            return GL_OUT_OF_MEMORY;
-                        }
-                    }
-
-                    unsigned int firstElementOffset = (attribs[i].mOffset / attribs[i].stride()) * outputElementSize;
-                    unsigned int startOffset = (instances == 0 || attribs[i].mDivisor == 0) ? start * outputElementSize : 0;
-                    if (streamOffset + firstElementOffset + startOffset < streamOffset)
-                    {
-                        return GL_OUT_OF_MEMORY;
-                    }
-
-                    streamOffset += firstElementOffset + startOffset;
-                }
-                else
-                {
-                    int totalCount = StreamingBufferElementCount(attribs[i], count, instances);
-                    if (!mStreamingBuffer->getVertexBuffer()->getSpaceRequired(attribs[i], 1, 0, &outputElementSize) ||
-                        !mStreamingBuffer->storeVertexAttributes(attribs[i], start, totalCount, instances, &streamOffset))
-                    {
-                        return GL_OUT_OF_MEMORY;
-                    }
-                }
-
-                translated[i].storage = directStorage ? storage : NULL;
-                translated[i].vertexBuffer = vertexBuffer->getVertexBuffer();
-                translated[i].serial = directStorage ? storage->getSerial() : vertexBuffer->getSerial();
-                translated[i].divisor = attribs[i].mDivisor;
-
-                translated[i].attribute = &attribs[i];
-                translated[i].stride = outputElementSize;
-                translated[i].offset = streamOffset;
-            }
-            else
-            {
-                if (!mCurrentValueBuffer[i])
-                {
-                    mCurrentValueBuffer[i] = new StreamingVertexBufferInterface(mRenderer, CONSTANT_VERTEX_BUFFER_SIZE);
-                }
-
-                StreamingVertexBufferInterface *buffer = mCurrentValueBuffer[i];
-
-                if (mCurrentValue[i][0] != attribs[i].mCurrentValue[0] ||
-                    mCurrentValue[i][1] != attribs[i].mCurrentValue[1] ||
-                    mCurrentValue[i][2] != attribs[i].mCurrentValue[2] ||
-                    mCurrentValue[i][3] != attribs[i].mCurrentValue[3])
-                {
-                    unsigned int requiredSpace = sizeof(float) * 4;
-                    if (!buffer->reserveRawDataSpace(requiredSpace))
-                    {
-                        return GL_OUT_OF_MEMORY;
-                    }
-
-                    unsigned int streamOffset;
-                    if (!buffer->storeRawData(attribs[i].mCurrentValue, requiredSpace, &streamOffset))
-                    {
-                        return GL_OUT_OF_MEMORY;
-                    }
-
-                    mCurrentValue[i][0] = attribs[i].mCurrentValue[0];
-                    mCurrentValue[i][1] = attribs[i].mCurrentValue[1];
-                    mCurrentValue[i][2] = attribs[i].mCurrentValue[2];
-                    mCurrentValue[i][3] = attribs[i].mCurrentValue[3];
-                    mCurrentValueOffsets[i] = streamOffset;
-                }
-
-                translated[i].storage = NULL;
-                translated[i].vertexBuffer = mCurrentValueBuffer[i]->getVertexBuffer();
-                translated[i].serial = mCurrentValueBuffer[i]->getSerial();
-                translated[i].divisor = 0;
-
-                translated[i].attribute = &attribs[i];
-                translated[i].stride = 0;
-                translated[i].offset = mCurrentValueOffsets[i];
-            }
-        }
-    }
-
-    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
-    {
-        if (translated[i].active && attribs[i].mArrayEnabled)
-        {
-            gl::Buffer *buffer = attribs[i].mBoundBuffer.get();
-
-            if (buffer)
-            {
-                buffer->promoteStaticUsage(count * attribs[i].typeSize());
-            }
-        }
-    }
-
-    return GL_NO_ERROR;
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/VertexDataManager.h b/src/3rdparty/angle/src/libGLESv2/renderer/VertexDataManager.h
deleted file mode 100644
index 1a8786552a..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/VertexDataManager.h
+++ /dev/null
@@ -1,65 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexDataManager.h: Defines the VertexDataManager, a class that
-// runs the Buffer translation process.
-
-#ifndef LIBGLESV2_RENDERER_VERTEXDATAMANAGER_H_
-#define LIBGLESV2_RENDERER_VERTEXDATAMANAGER_H_
-
-#include "libGLESv2/Constants.h"
-#include "common/angleutils.h"
-
-namespace gl
-{
-class VertexAttribute;
-class ProgramBinary;
-}
-
-namespace rx
-{
-class BufferStorage;
-class StreamingVertexBufferInterface;
-class VertexBuffer;
-class Renderer;
-
-struct TranslatedAttribute
-{
-    bool active;
-
-    const gl::VertexAttribute *attribute;
-    unsigned int offset;
-    unsigned int stride;   // 0 means not to advance the read pointer at all
-
-    VertexBuffer *vertexBuffer;
-    BufferStorage *storage;
-    unsigned int serial;
-    unsigned int divisor;
-};
-
-class VertexDataManager
-{
-  public:
-    VertexDataManager(rx::Renderer *renderer);
-    virtual ~VertexDataManager();
-
-    GLenum prepareVertexData(const gl::VertexAttribute attribs[], gl::ProgramBinary *programBinary, GLint start, GLsizei count, TranslatedAttribute *outAttribs, GLsizei instances);
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(VertexDataManager);
-
-    rx::Renderer *const mRenderer;
-
-    StreamingVertexBufferInterface *mStreamingBuffer;
-
-    float mCurrentValue[gl::MAX_VERTEX_ATTRIBS][4];
-    StreamingVertexBufferInterface *mCurrentValueBuffer[gl::MAX_VERTEX_ATTRIBS];
-    std::size_t mCurrentValueOffsets[gl::MAX_VERTEX_ATTRIBS];
-};
-
-}
-
-#endif   // LIBGLESV2_RENDERER_VERTEXDATAMANAGER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.cpp
new file mode 100644
index 0000000000..004223d70f
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.cpp
@@ -0,0 +1,22 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// copyimage.cpp: Defines image copying functions
+
+#include "libGLESv2/renderer/copyImage.h"
+
+namespace rx
+{
+
+void CopyBGRA8ToRGBA8(const uint8_t *source, uint8_t *dest)
+{
+    uint32_t argb = *reinterpret_cast<const uint32_t*>(source);
+    *reinterpret_cast<uint32_t*>(dest) = (argb & 0xFF00FF00) |       // Keep alpha and green
+                                         (argb & 0x00FF0000) >> 16 | // Move red to blue
+                                         (argb & 0x000000FF) << 16;  // Move blue to red
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.h b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.h
new file mode 100644
index 0000000000..513eb5cb3d
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.h
@@ -0,0 +1,35 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// copyimage.h: Defines image copying functions
+
+#ifndef LIBGLESV2_RENDERER_COPYIMAGE_H_
+#define LIBGLESV2_RENDERER_COPYIMAGE_H_
+
+#include "common/mathutil.h"
+#include "libGLESv2/angletypes.h"
+
+#include <cstdint>
+
+namespace rx
+{
+
+template <typename sourceType, typename colorDataType>
+void ReadColor(const uint8_t *source, uint8_t *dest);
+
+template <typename destType, typename colorDataType>
+void WriteColor(const uint8_t *source, uint8_t *dest);
+
+template <typename sourceType, typename destType, typename colorDataType>
+void CopyPixel(const uint8_t *source, uint8_t *dest);
+
+void CopyBGRA8ToRGBA8(const uint8_t *source, uint8_t *dest);
+
+}
+
+#include "copyimage.inl"
+
+#endif // LIBGLESV2_RENDERER_COPYIMAGE_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl
new file mode 100644
index 0000000000..0498cf7750
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl
@@ -0,0 +1,32 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// copyimage.inl: Defines image copying functions
+
+namespace rx
+{
+
+template <typename sourceType, typename colorDataType>
+inline void ReadColor(const uint8_t *source, uint8_t *dest)
+{
+    sourceType::readColor(reinterpret_cast<gl::Color<colorDataType>*>(dest), reinterpret_cast<const sourceType*>(source));
+}
+
+template <typename destType, typename colorDataType>
+inline void WriteColor(const uint8_t *source, uint8_t *dest)
+{
+    destType::writeColor(reinterpret_cast<destType*>(dest), reinterpret_cast<const gl::Color<colorDataType>*>(source));
+}
+
+template <typename sourceType, typename destType, typename colorDataType>
+inline void CopyPixel(const uint8_t *source, uint8_t *dest)
+{
+    colorDataType temp;
+    ReadColor<sourceType, colorDataType>(source, &temp);
+    WriteColor<destType, colorDataType>(&temp, dest);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/copyvertex.h b/src/3rdparty/angle/src/libGLESv2/renderer/copyvertex.h
new file mode 100644
index 0000000000..e0e8af166b
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/copyvertex.h
@@ -0,0 +1,35 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// copyvertex.h: Defines vertex buffer copying and conversion functions
+
+#ifndef LIBGLESV2_RENDERER_COPYVERTEX_H_
+#define LIBGLESV2_RENDERER_COPYVERTEX_H_
+
+#include "common/mathutil.h"
+
+namespace rx
+{
+
+// 'widenDefaultValueBits' gives the default value for the alpha channel (4th component)
+//  the sentinel value 0 means we do not want to widen the input or add an alpha channel
+template <typename T, size_t componentCount, uint32_t widenDefaultValueBits>
+inline void CopyNativeVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output);
+
+template <size_t componentCount>
+inline void Copy32FixedTo32FVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output);
+
+template <typename T, size_t componentCount, bool normalized>
+inline void CopyTo32FVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output);
+
+template <bool isSigned, bool normalized, bool toFloat>
+inline void CopyXYZ10W2ToXYZW32FVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output);
+
+}
+
+#include "copyvertex.inl"
+
+#endif // LIBGLESV2_RENDERER_COPYVERTEX_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/copyvertex.inl b/src/3rdparty/angle/src/libGLESv2/renderer/copyvertex.inl
new file mode 100644
index 0000000000..7eef17b22b
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/copyvertex.inl
@@ -0,0 +1,288 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+namespace rx
+{
+
+template <typename T, size_t componentCount, uint32_t widenDefaultValueBits>
+inline void CopyNativeVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output)
+{
+    const size_t attribSize = sizeof(T)* componentCount;
+    const T defaultValue = gl::bitCast<T>(widenDefaultValueBits);
+    const bool widen = (widenDefaultValueBits != 0);
+
+    if (attribSize == stride && !widen)
+    {
+        memcpy(output, input, count * attribSize);
+    }
+    else
+    {
+        size_t outputStride = widen ? 4 : componentCount;
+
+        for (size_t i = 0; i < count; i++)
+        {
+            const T *offsetInput = reinterpret_cast<const T*>(input + (i * stride));
+            T *offsetOutput = reinterpret_cast<T*>(output) + i * outputStride;
+
+            for (size_t j = 0; j < componentCount; j++)
+            {
+                offsetOutput[j] = offsetInput[j];
+            }
+
+            if (widen)
+            {
+                offsetOutput[3] = defaultValue;
+            }
+        }
+    }
+}
+
+template <size_t componentCount>
+inline void Copy32FixedTo32FVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output)
+{
+    static const float divisor = 1.0f / (1 << 16);
+
+    for (size_t i = 0; i < count; i++)
+    {
+        const GLfixed* offsetInput = reinterpret_cast<const GLfixed*>(input + (stride * i));
+        float* offsetOutput = reinterpret_cast<float*>(output) + i * componentCount;
+
+        for (size_t j = 0; j < componentCount; j++)
+        {
+            offsetOutput[j] = static_cast<float>(offsetInput[j]) * divisor;
+        }
+    }
+}
+
+template <typename T, size_t componentCount, bool normalized>
+inline void CopyTo32FVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output)
+{
+    typedef std::numeric_limits<T> NL;
+
+    for (size_t i = 0; i < count; i++)
+    {
+        const T *offsetInput = reinterpret_cast<const T*>(input + (stride * i));
+        float *offsetOutput = reinterpret_cast<float*>(output) + i * componentCount;
+
+        for (size_t j = 0; j < componentCount; j++)
+        {
+            if (normalized)
+            {
+                if (NL::is_signed)
+                {
+                    const float divisor = 1.0f / (2 * static_cast<float>(NL::max()) + 1);
+                    offsetOutput[j] = (2 * static_cast<float>(offsetInput[j]) + 1) * divisor;
+                }
+                else
+                {
+                    offsetOutput[j] =  static_cast<float>(offsetInput[j]) / NL::max();
+                }
+            }
+            else
+            {
+                offsetOutput[j] =  static_cast<float>(offsetInput[j]);
+            }
+        }
+    }
+}
+
+namespace priv
+{
+
+template <bool isSigned, bool normalized, bool toFloat>
+static inline void CopyPackedRGB(uint32_t data, uint8_t *output)
+{
+    const uint32_t rgbSignMask = 0x200;       // 1 set at the 9 bit
+    const uint32_t negativeMask = 0xFFFFFC00; // All bits from 10 to 31 set to 1
+
+    if (toFloat)
+    {
+        GLfloat *floatOutput = reinterpret_cast<GLfloat*>(output);
+        if (isSigned)
+        {
+            GLfloat finalValue = 0;
+            if (data & rgbSignMask)
+            {
+                int negativeNumber = data | negativeMask;
+                finalValue = static_cast<GLfloat>(negativeNumber);
+            }
+            else
+            {
+                finalValue = static_cast<GLfloat>(data);
+            }
+
+            if (normalized)
+            {
+                const int32_t maxValue = 0x1FF;      // 1 set in bits 0 through 8
+                const int32_t minValue = 0xFFFFFE01; // Inverse of maxValue
+
+                // A 10-bit two's complement number has the possibility of being minValue - 1 but
+                // OpenGL's normalization rules dictate that it should be clamped to minValue in this
+                // case.
+                if (finalValue < minValue)
+                {
+                    finalValue = minValue;
+                }
+
+                const int32_t halfRange = (maxValue - minValue) >> 1;
+                *floatOutput = ((finalValue - minValue) / halfRange) - 1.0f;
+            }
+            else
+            {
+                *floatOutput = finalValue;
+            }
+        }
+        else
+        {
+            if (normalized)
+            {
+                const uint32_t maxValue = 0x3FF; // 1 set in bits 0 through 9
+                *floatOutput = static_cast<GLfloat>(data) / static_cast<GLfloat>(maxValue);
+            }
+            else
+            {
+                *floatOutput = static_cast<GLfloat>(data);
+            }
+        }
+    }
+    else
+    {
+        if (isSigned)
+        {
+            GLshort *intOutput = reinterpret_cast<GLshort*>(output);
+
+            if (data & rgbSignMask)
+            {
+                *intOutput = data | negativeMask;
+            }
+            else
+            {
+                *intOutput = data;
+            }
+        }
+        else
+        {
+            GLushort *uintOutput = reinterpret_cast<GLushort*>(output);
+            *uintOutput = data;
+        }
+    }
+}
+
+template <bool isSigned, bool normalized, bool toFloat>
+inline void CopyPackedAlpha(uint32_t data, uint8_t *output)
+{
+    if (toFloat)
+    {
+        GLfloat *floatOutput = reinterpret_cast<GLfloat*>(output);
+        if (isSigned)
+        {
+            if (normalized)
+            {
+                switch (data)
+                {
+                  case 0x0: *floatOutput =  0.0f; break;
+                  case 0x1: *floatOutput =  1.0f; break;
+                  case 0x2: *floatOutput = -1.0f; break;
+                  case 0x3: *floatOutput = -1.0f; break;
+                  default: UNREACHABLE();
+                }
+            }
+            else
+            {
+                switch (data)
+                {
+                  case 0x0: *floatOutput =  0.0f; break;
+                  case 0x1: *floatOutput =  1.0f; break;
+                  case 0x2: *floatOutput = -2.0f; break;
+                  case 0x3: *floatOutput = -1.0f; break;
+                  default: UNREACHABLE();
+                }
+            }
+        }
+        else
+        {
+            if (normalized)
+            {
+                switch (data)
+                {
+                  case 0x0: *floatOutput = 0.0f / 3.0f; break;
+                  case 0x1: *floatOutput = 1.0f / 3.0f; break;
+                  case 0x2: *floatOutput = 2.0f / 3.0f; break;
+                  case 0x3: *floatOutput = 3.0f / 3.0f; break;
+                  default: UNREACHABLE();
+                }
+            }
+            else
+            {
+                switch (data)
+                {
+                  case 0x0: *floatOutput = 0.0f; break;
+                  case 0x1: *floatOutput = 1.0f; break;
+                  case 0x2: *floatOutput = 2.0f; break;
+                  case 0x3: *floatOutput = 3.0f; break;
+                  default: UNREACHABLE();
+                }
+            }
+        }
+    }
+    else
+    {
+        if (isSigned)
+        {
+            GLshort *intOutput = reinterpret_cast<GLshort*>(output);
+            switch (data)
+            {
+              case 0x0: *intOutput =  0; break;
+              case 0x1: *intOutput =  1; break;
+              case 0x2: *intOutput = -2; break;
+              case 0x3: *intOutput = -1; break;
+              default: UNREACHABLE();
+            }
+        }
+        else
+        {
+            GLushort *uintOutput = reinterpret_cast<GLushort*>(output);
+            switch (data)
+            {
+              case 0x0: *uintOutput = 0; break;
+              case 0x1: *uintOutput = 1; break;
+              case 0x2: *uintOutput = 2; break;
+              case 0x3: *uintOutput = 3; break;
+              default: UNREACHABLE();
+            }
+        }
+    }
+}
+
+}
+
+template <bool isSigned, bool normalized, bool toFloat>
+inline void CopyXYZ10W2ToXYZW32FVertexData(const uint8_t *input, size_t stride, size_t count, uint8_t *output)
+{
+    const size_t outputComponentSize = toFloat ? 4 : 2;
+    const size_t componentCount = 4;
+
+    const uint32_t rgbMask = 0x3FF; // 1 set in bits 0 through 9
+    const size_t redShift = 0;    // red is bits 0 through 9
+    const size_t greenShift = 10; // green is bits 10 through 19
+    const size_t blueShift = 20;  // blue is bits 20 through 29
+
+    const uint32_t alphaMask = 0x3; // 1 set in bits 0 and 1
+    const size_t alphaShift = 30; // Alpha is the 30 and 31 bits
+
+    for (size_t i = 0; i < count; i++)
+    {
+        GLuint packedValue = *reinterpret_cast<const GLuint*>(input + (i * stride));
+        uint8_t *offsetOutput = output + (i * outputComponentSize * componentCount);
+
+        priv::CopyPackedRGB<isSigned, normalized, toFloat>(  (packedValue >> redShift)   & rgbMask,   offsetOutput + (0 * outputComponentSize));
+        priv::CopyPackedRGB<isSigned, normalized, toFloat>(  (packedValue >> greenShift) & rgbMask,   offsetOutput + (1 * outputComponentSize));
+        priv::CopyPackedRGB<isSigned, normalized, toFloat>(  (packedValue >> blueShift)  & rgbMask,   offsetOutput + (2 * outputComponentSize));
+        priv::CopyPackedAlpha<isSigned, normalized, toFloat>((packedValue >> alphaShift) & alphaMask, offsetOutput + (3 * outputComponentSize));
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/BufferD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/BufferD3D.cpp
new file mode 100644
index 0000000000..a34ef03fb8
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/BufferD3D.cpp
@@ -0,0 +1,82 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// BufferD3D.cpp Defines common functionality between the Buffer9 and Buffer11 classes.
+
+#include "libGLESv2/renderer/d3d/BufferD3D.h"
+#include "libGLESv2/renderer/d3d/VertexBuffer.h"
+#include "libGLESv2/renderer/d3d/IndexBuffer.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+unsigned int BufferD3D::mNextSerial = 1;
+
+BufferD3D::BufferD3D()
+    : BufferImpl(),
+      mStaticVertexBuffer(NULL),
+      mStaticIndexBuffer(NULL)
+{
+    updateSerial();
+}
+
+BufferD3D::~BufferD3D()
+{
+    SafeDelete(mStaticVertexBuffer);
+    SafeDelete(mStaticIndexBuffer);
+}
+
+BufferD3D *BufferD3D::makeBufferD3D(BufferImpl *buffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(BufferD3D*, buffer));
+    return static_cast<BufferD3D*>(buffer);
+}
+
+void BufferD3D::updateSerial()
+{
+    mSerial = mNextSerial++;
+}
+
+void BufferD3D::initializeStaticData()
+{
+    if (!mStaticVertexBuffer)
+    {
+        mStaticVertexBuffer = new rx::StaticVertexBufferInterface(getRenderer());
+    }
+    if (!mStaticIndexBuffer)
+    {
+        mStaticIndexBuffer = new rx::StaticIndexBufferInterface(getRenderer());
+    }
+}
+
+void BufferD3D::invalidateStaticData()
+{
+    if ((mStaticVertexBuffer && mStaticVertexBuffer->getBufferSize() != 0) || (mStaticIndexBuffer && mStaticIndexBuffer->getBufferSize() != 0))
+    {
+        SafeDelete(mStaticVertexBuffer);
+        SafeDelete(mStaticIndexBuffer);
+    }
+
+    mUnmodifiedDataUse = 0;
+}
+
+// Creates static buffers if sufficient used data has been left unmodified
+void BufferD3D::promoteStaticUsage(int dataSize)
+{
+    if (!mStaticVertexBuffer && !mStaticIndexBuffer)
+    {
+        mUnmodifiedDataUse += dataSize;
+
+        if (mUnmodifiedDataUse > 3 * getSize())
+        {
+            initializeStaticData();
+        }
+    }
+}
+
+}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/BufferD3D.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/BufferD3D.h
new file mode 100644
index 0000000000..44f14cee58
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/BufferD3D.h
@@ -0,0 +1,56 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// BufferImpl.h: Defines the abstract rx::BufferImpl class.
+
+#ifndef LIBGLESV2_RENDERER_BUFFERD3D_H_
+#define LIBGLESV2_RENDERER_BUFFERD3D_H_
+
+#include "libGLESv2/renderer/BufferImpl.h"
+#include "libGLESv2/angletypes.h"
+
+namespace rx
+{
+
+class Renderer;
+class StaticIndexBufferInterface;
+class StaticVertexBufferInterface;
+
+class BufferD3D : public BufferImpl
+{
+  public:
+    BufferD3D();
+    virtual ~BufferD3D();
+
+    static BufferD3D *makeBufferD3D(BufferImpl *buffer);
+
+    unsigned int getSerial() const { return mSerial; }
+
+    virtual size_t getSize() const = 0;
+    virtual bool supportsDirectBinding() const = 0;
+    virtual Renderer* getRenderer() = 0;
+
+    rx::StaticVertexBufferInterface *getStaticVertexBuffer() { return mStaticVertexBuffer; }
+    rx::StaticIndexBufferInterface *getStaticIndexBuffer() { return mStaticIndexBuffer; }
+
+    void initializeStaticData();
+    void invalidateStaticData();
+    void promoteStaticUsage(int dataSize);
+
+  protected:
+    unsigned int mSerial;
+    static unsigned int mNextSerial;
+
+    void updateSerial();
+
+    rx::StaticVertexBufferInterface *mStaticVertexBuffer;
+    rx::StaticIndexBufferInterface *mStaticIndexBuffer;
+    unsigned int mUnmodifiedDataUse;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_BUFFERIMPLD3D_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/DynamicHLSL.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/DynamicHLSL.cpp
new file mode 100644
index 0000000000..13411ebe64
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/DynamicHLSL.cpp
@@ -0,0 +1,1144 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// DynamicHLSL.cpp: Implementation for link and run-time HLSL generation
+//
+
+#include "libGLESv2/renderer/d3d/DynamicHLSL.h"
+#include "libGLESv2/renderer/d3d/ShaderD3D.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/Shader.h"
+#include "libGLESv2/Program.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/formatutils.h"
+
+#include "common/utilities.h"
+#include "common/blocklayout.h"
+
+// For use with ArrayString, see angleutils.h
+META_ASSERT(GL_INVALID_INDEX == UINT_MAX);
+
+using namespace gl;
+
+namespace
+{
+
+std::string HLSLComponentTypeString(GLenum componentType)
+{
+    switch (componentType)
+    {
+      case GL_UNSIGNED_INT:         return "uint";
+      case GL_INT:                  return "int";
+      case GL_UNSIGNED_NORMALIZED:
+      case GL_SIGNED_NORMALIZED:
+      case GL_FLOAT:                return "float";
+      default: UNREACHABLE();       return "not-component-type";
+    }
+}
+
+std::string HLSLComponentTypeString(GLenum componentType, int componentCount)
+{
+    return HLSLComponentTypeString(componentType) + (componentCount > 1 ? Str(componentCount) : "");
+}
+
+std::string HLSLMatrixTypeString(GLenum type)
+{
+    switch (type)
+    {
+      case GL_FLOAT_MAT2:     return "float2x2";
+      case GL_FLOAT_MAT3:     return "float3x3";
+      case GL_FLOAT_MAT4:     return "float4x4";
+      case GL_FLOAT_MAT2x3:   return "float2x3";
+      case GL_FLOAT_MAT3x2:   return "float3x2";
+      case GL_FLOAT_MAT2x4:   return "float2x4";
+      case GL_FLOAT_MAT4x2:   return "float4x2";
+      case GL_FLOAT_MAT3x4:   return "float3x4";
+      case GL_FLOAT_MAT4x3:   return "float4x3";
+      default: UNREACHABLE(); return "not-matrix-type";
+    }
+}
+
+std::string HLSLTypeString(GLenum type)
+{
+    if (gl::IsMatrixType(type))
+    {
+        return HLSLMatrixTypeString(type);
+    }
+
+    return HLSLComponentTypeString(gl::VariableComponentType(type), gl::VariableComponentCount(type));
+}
+
+const rx::PixelShaderOutputVariable &GetOutputAtLocation(const std::vector<rx::PixelShaderOutputVariable> &outputVariables,
+                                                        unsigned int location)
+{
+    for (size_t variableIndex = 0; variableIndex < outputVariables.size(); ++variableIndex)
+    {
+        if (outputVariables[variableIndex].outputIndex == location)
+        {
+            return outputVariables[variableIndex];
+        }
+    }
+
+    UNREACHABLE();
+    return outputVariables[0];
+}
+
+}
+
+namespace rx
+{
+
+const std::string VERTEX_ATTRIBUTE_STUB_STRING = "@@ VERTEX ATTRIBUTES @@";
+const std::string PIXEL_OUTPUT_STUB_STRING = "@@ PIXEL OUTPUT @@";
+
+DynamicHLSL::DynamicHLSL(rx::Renderer *const renderer)
+    : mRenderer(renderer)
+{
+}
+
+static bool packVarying(PackedVarying *varying, const int maxVaryingVectors, VaryingPacking packing)
+{
+    GLenum transposedType = TransposeMatrixType(varying->type);
+
+    // matrices within varying structs are not transposed
+    int registers = (varying->isStruct() ? HLSLVariableRegisterCount(*varying) : VariableRowCount(transposedType)) * varying->elementCount();
+    int elements = (varying->isStruct() ? 4 : VariableColumnCount(transposedType));
+
+    if (elements >= 2 && elements <= 4)
+    {
+        for (int r = 0; r <= maxVaryingVectors - registers; r++)
+        {
+            bool available = true;
+
+            for (int y = 0; y < registers && available; y++)
+            {
+                for (int x = 0; x < elements && available; x++)
+                {
+                    if (packing[r + y][x])
+                    {
+                        available = false;
+                    }
+                }
+            }
+
+            if (available)
+            {
+                varying->registerIndex = r;
+                varying->columnIndex = 0;
+
+                for (int y = 0; y < registers; y++)
+                {
+                    for (int x = 0; x < elements; x++)
+                    {
+                        packing[r + y][x] = &*varying;
+                    }
+                }
+
+                return true;
+            }
+        }
+
+        if (elements == 2)
+        {
+            for (int r = maxVaryingVectors - registers; r >= 0; r--)
+            {
+                bool available = true;
+
+                for (int y = 0; y < registers && available; y++)
+                {
+                    for (int x = 2; x < 4 && available; x++)
+                    {
+                        if (packing[r + y][x])
+                        {
+                            available = false;
+                        }
+                    }
+                }
+
+                if (available)
+                {
+                    varying->registerIndex = r;
+                    varying->columnIndex = 2;
+
+                    for (int y = 0; y < registers; y++)
+                    {
+                        for (int x = 2; x < 4; x++)
+                        {
+                            packing[r + y][x] = &*varying;
+                        }
+                    }
+
+                    return true;
+                }
+            }
+        }
+    }
+    else if (elements == 1)
+    {
+        int space[4] = { 0 };
+
+        for (int y = 0; y < maxVaryingVectors; y++)
+        {
+            for (int x = 0; x < 4; x++)
+            {
+                space[x] += packing[y][x] ? 0 : 1;
+            }
+        }
+
+        int column = 0;
+
+        for (int x = 0; x < 4; x++)
+        {
+            if (space[x] >= registers && (space[column] < registers || space[x] < space[column]))
+            {
+                column = x;
+            }
+        }
+
+        if (space[column] >= registers)
+        {
+            for (int r = 0; r < maxVaryingVectors; r++)
+            {
+                if (!packing[r][column])
+                {
+                    varying->registerIndex = r;
+                    varying->columnIndex = column;
+
+                    for (int y = r; y < r + registers; y++)
+                    {
+                        packing[y][column] = &*varying;
+                    }
+
+                    break;
+                }
+            }
+
+            return true;
+        }
+    }
+    else UNREACHABLE();
+
+    return false;
+}
+
+// Packs varyings into generic varying registers, using the algorithm from [OpenGL ES Shading Language 1.00 rev. 17] appendix A section 7 page 111
+// Returns the number of used varying registers, or -1 if unsuccesful
+int DynamicHLSL::packVaryings(InfoLog &infoLog, VaryingPacking packing, rx::ShaderD3D *fragmentShader,
+                              rx::ShaderD3D *vertexShader, const std::vector<std::string>& transformFeedbackVaryings)
+{
+    // TODO (geofflang):  Use context's caps
+    const int maxVaryingVectors = mRenderer->getRendererCaps().maxVaryingVectors;
+
+    vertexShader->resetVaryingsRegisterAssignment();
+    fragmentShader->resetVaryingsRegisterAssignment();
+
+    std::set<std::string> packedVaryings;
+
+    std::vector<gl::PackedVarying> &fragmentVaryings = fragmentShader->getVaryings();
+    std::vector<gl::PackedVarying> &vertexVaryings = vertexShader->getVaryings();
+    for (unsigned int varyingIndex = 0; varyingIndex < fragmentVaryings.size(); varyingIndex++)
+    {
+        PackedVarying *varying = &fragmentVaryings[varyingIndex];
+
+        // Do not assign registers to built-in or unreferenced varyings
+        if (varying->isBuiltIn() || !varying->staticUse)
+        {
+            continue;
+        }
+
+        if (packVarying(varying, maxVaryingVectors, packing))
+        {
+            packedVaryings.insert(varying->name);
+        }
+        else
+        {
+            infoLog.append("Could not pack varying %s", varying->name.c_str());
+            return -1;
+        }
+    }
+
+    for (unsigned int feedbackVaryingIndex = 0; feedbackVaryingIndex < transformFeedbackVaryings.size(); feedbackVaryingIndex++)
+    {
+        const std::string &transformFeedbackVarying = transformFeedbackVaryings[feedbackVaryingIndex];
+        if (packedVaryings.find(transformFeedbackVarying) == packedVaryings.end())
+        {
+            bool found = false;
+            for (unsigned int varyingIndex = 0; varyingIndex < vertexVaryings.size(); varyingIndex++)
+            {
+                PackedVarying *varying = &vertexVaryings[varyingIndex];
+                if (transformFeedbackVarying == varying->name)
+                {
+                    if (!packVarying(varying, maxVaryingVectors, packing))
+                    {
+                        infoLog.append("Could not pack varying %s", varying->name.c_str());
+                        return -1;
+                    }
+
+                    found = true;
+                    break;
+                }
+            }
+
+            if (!found && transformFeedbackVarying != "gl_Position" && transformFeedbackVarying != "gl_PointSize")
+            {
+                infoLog.append("Transform feedback varying %s does not exist in the vertex shader.", transformFeedbackVarying.c_str());
+                return -1;
+            }
+        }
+    }
+
+    // Return the number of used registers
+    int registers = 0;
+
+    for (int r = 0; r < maxVaryingVectors; r++)
+    {
+        if (packing[r][0] || packing[r][1] || packing[r][2] || packing[r][3])
+        {
+            registers++;
+        }
+    }
+
+    return registers;
+}
+
+std::string DynamicHLSL::generateVaryingHLSL(const ShaderD3D *shader) const
+{
+    std::string varyingSemantic = getVaryingSemantic(shader->mUsesPointSize);
+    std::string varyingHLSL;
+
+    const std::vector<gl::PackedVarying> &varyings = shader->getVaryings();
+
+    for (unsigned int varyingIndex = 0; varyingIndex < varyings.size(); varyingIndex++)
+    {
+        const PackedVarying &varying = varyings[varyingIndex];
+        if (varying.registerAssigned())
+        {
+            ASSERT(!varying.isBuiltIn());
+            GLenum transposedType = TransposeMatrixType(varying.type);
+            int variableRows = (varying.isStruct() ? 1 : VariableRowCount(transposedType));
+
+            for (unsigned int elementIndex = 0; elementIndex < varying.elementCount(); elementIndex++)
+            {
+                for (int row = 0; row < variableRows; row++)
+                {
+                    // TODO: Add checks to ensure D3D interpolation modifiers don't result in too many registers being used.
+                    // For example, if there are N registers, and we have N vec3 varyings and 1 float varying, then D3D will pack them into N registers.
+                    // If the float varying has the 'nointerpolation' modifier on it then we would need N + 1 registers, and D3D compilation will fail.
+
+                    switch (varying.interpolation)
+                    {
+                      case sh::INTERPOLATION_SMOOTH:   varyingHLSL += "    ";                 break;
+                      case sh::INTERPOLATION_FLAT:     varyingHLSL += "    nointerpolation "; break;
+                      case sh::INTERPOLATION_CENTROID: varyingHLSL += "    centroid ";        break;
+                      default:  UNREACHABLE();
+                    }
+
+                    unsigned int semanticIndex = elementIndex * variableRows + varying.columnIndex * mRenderer->getRendererCaps().maxVaryingVectors + varying.registerIndex + row;
+                    std::string n = Str(semanticIndex);
+
+                    std::string typeString;
+
+                    if (varying.isStruct())
+                    {
+                        // matrices within structs are not transposed, so
+                        // do not use the special struct prefix "rm"
+                        typeString = decorateVariable(varying.structName);
+                    }
+                    else
+                    {
+                        GLenum componentType = VariableComponentType(transposedType);
+                        int columnCount = VariableColumnCount(transposedType);
+                        typeString = HLSLComponentTypeString(componentType, columnCount);
+                    }
+                    varyingHLSL += typeString + " v" + n + " : " + varyingSemantic + n + ";\n";
+                }
+            }
+        }
+    }
+
+    return varyingHLSL;
+}
+
+std::string DynamicHLSL::generateVertexShaderForInputLayout(const std::string &sourceShader,
+                                                            const VertexFormat inputLayout[],
+                                                            const sh::Attribute shaderAttributes[]) const
+{
+    std::string structHLSL, initHLSL;
+
+    int semanticIndex = 0;
+    unsigned int inputIndex = 0;
+
+    for (unsigned int attributeIndex = 0; attributeIndex < MAX_VERTEX_ATTRIBS; attributeIndex++)
+    {
+        const sh::Attribute &shaderAttribute = shaderAttributes[attributeIndex];
+        if (!shaderAttribute.name.empty())
+        {
+            ASSERT(inputIndex < MAX_VERTEX_ATTRIBS);
+            const VertexFormat &vertexFormat = inputLayout[inputIndex];
+
+            // HLSL code for input structure
+            if (IsMatrixType(shaderAttribute.type))
+            {
+                // Matrix types are always transposed
+                structHLSL += "    " + HLSLMatrixTypeString(TransposeMatrixType(shaderAttribute.type));
+            }
+            else
+            {
+                GLenum componentType = mRenderer->getVertexComponentType(vertexFormat);
+                structHLSL += "    " + HLSLComponentTypeString(componentType, VariableComponentCount(shaderAttribute.type));
+            }
+
+            structHLSL += " " + decorateVariable(shaderAttribute.name) + " : TEXCOORD" + Str(semanticIndex) + ";\n";
+            semanticIndex += VariableRegisterCount(shaderAttribute.type);
+
+            // HLSL code for initialization
+            initHLSL += "    " + decorateVariable(shaderAttribute.name) + " = ";
+
+            // Mismatched vertex attribute to vertex input may result in an undefined
+            // data reinterpretation (eg for pure integer->float, float->pure integer)
+            // TODO: issue warning with gl debug info extension, when supported
+            if (IsMatrixType(shaderAttribute.type) ||
+                (mRenderer->getVertexConversionType(vertexFormat) & rx::VERTEX_CONVERT_GPU) != 0)
+            {
+                initHLSL += generateAttributeConversionHLSL(vertexFormat, shaderAttribute);
+            }
+            else
+            {
+                initHLSL += "input." + decorateVariable(shaderAttribute.name);
+            }
+
+            initHLSL += ";\n";
+
+            inputIndex += VariableRowCount(TransposeMatrixType(shaderAttribute.type));
+        }
+    }
+
+    std::string replacementHLSL = "struct VS_INPUT\n"
+                                  "{\n" +
+                                  structHLSL +
+                                  "};\n"
+                                  "\n"
+                                  "void initAttributes(VS_INPUT input)\n"
+                                  "{\n" +
+                                  initHLSL +
+                                  "}\n";
+
+    std::string vertexHLSL(sourceShader);
+
+    size_t copyInsertionPos = vertexHLSL.find(VERTEX_ATTRIBUTE_STUB_STRING);
+    vertexHLSL.replace(copyInsertionPos, VERTEX_ATTRIBUTE_STUB_STRING.length(), replacementHLSL);
+
+    return vertexHLSL;
+}
+
+std::string DynamicHLSL::generatePixelShaderForOutputSignature(const std::string &sourceShader, const std::vector<PixelShaderOutputVariable> &outputVariables,
+                                                               bool usesFragDepth, const std::vector<GLenum> &outputLayout) const
+{
+    const int shaderModel = mRenderer->getMajorShaderModel();
+    std::string targetSemantic = (shaderModel >= 4) ? "SV_TARGET" : "COLOR";
+    std::string depthSemantic = (shaderModel >= 4) ? "SV_Depth" : "DEPTH";
+
+    std::string declarationHLSL;
+    std::string copyHLSL;
+
+    for (size_t layoutIndex = 0; layoutIndex < outputLayout.size(); ++layoutIndex)
+    {
+        GLenum binding = outputLayout[layoutIndex];
+
+        if (binding != GL_NONE)
+        {
+            unsigned int location = (binding - GL_COLOR_ATTACHMENT0);
+
+            const PixelShaderOutputVariable &outputVariable = GetOutputAtLocation(outputVariables, location);
+
+            declarationHLSL += "    " + HLSLTypeString(outputVariable.type) + " " + outputVariable.name +
+                               " : " + targetSemantic + Str(layoutIndex) + ";\n";
+
+            copyHLSL += "    output." + outputVariable.name + " = " + outputVariable.source + ";\n";
+        }
+    }
+
+    if (usesFragDepth)
+    {
+        declarationHLSL += "    float gl_Depth : " + depthSemantic + ";\n";
+        copyHLSL += "    output.gl_Depth = gl_Depth; \n";
+    }
+
+    std::string replacementHLSL = "struct PS_OUTPUT\n"
+                                  "{\n" +
+                                  declarationHLSL +
+                                  "};\n"
+                                  "\n"
+                                  "PS_OUTPUT generateOutput()\n"
+                                  "{\n"
+                                  "    PS_OUTPUT output;\n" +
+                                  copyHLSL +
+                                  "    return output;\n"
+                                  "}\n";
+
+    std::string pixelHLSL(sourceShader);
+
+    size_t outputInsertionPos = pixelHLSL.find(PIXEL_OUTPUT_STUB_STRING);
+    pixelHLSL.replace(outputInsertionPos, PIXEL_OUTPUT_STUB_STRING.length(), replacementHLSL);
+
+    return pixelHLSL;
+}
+
+std::string DynamicHLSL::getVaryingSemantic(bool pointSize) const
+{
+    // SM3 reserves the TEXCOORD semantic for point sprite texcoords (gl_PointCoord)
+    // In D3D11 we manually compute gl_PointCoord in the GS.
+    int shaderModel = mRenderer->getMajorShaderModel();
+    return ((pointSize && shaderModel < 4) ? "COLOR" : "TEXCOORD");
+}
+
+struct DynamicHLSL::SemanticInfo
+{
+    struct BuiltinInfo
+    {
+        BuiltinInfo()
+            : enabled(false),
+              index(0),
+              systemValue(false)
+        {}
+
+        bool enabled;
+        std::string semantic;
+        unsigned int index;
+        bool systemValue;
+
+        std::string str() const
+        {
+            return (systemValue ? semantic : (semantic + Str(index)));
+        }
+
+        void enableSystem(const std::string &systemValueSemantic)
+        {
+            enabled = true;
+            semantic = systemValueSemantic;
+            systemValue = true;
+        }
+
+        void enable(const std::string &semanticVal, unsigned int indexVal)
+        {
+            enabled = true;
+            semantic = semanticVal;
+            index = indexVal;
+        }
+    };
+
+    BuiltinInfo dxPosition;
+    BuiltinInfo glPosition;
+    BuiltinInfo glFragCoord;
+    BuiltinInfo glPointCoord;
+    BuiltinInfo glPointSize;
+};
+
+DynamicHLSL::SemanticInfo DynamicHLSL::getSemanticInfo(int startRegisters, bool fragCoord, bool pointCoord,
+                                                       bool pointSize, bool pixelShader) const
+{
+    SemanticInfo info;
+    bool hlsl4 = (mRenderer->getMajorShaderModel() >= 4);
+    const std::string &varyingSemantic = getVaryingSemantic(pointSize);
+
+    int reservedRegisterIndex = startRegisters;
+
+    if (hlsl4)
+    {
+        info.dxPosition.enableSystem("SV_Position");
+    }
+    else if (pixelShader)
+    {
+        info.dxPosition.enableSystem("VPOS");
+    }
+    else
+    {
+        info.dxPosition.enableSystem("POSITION");
+    }
+
+    info.glPosition.enable(varyingSemantic, reservedRegisterIndex++);
+
+    if (fragCoord)
+    {
+        info.glFragCoord.enable(varyingSemantic, reservedRegisterIndex++);
+    }
+
+    if (pointCoord)
+    {
+        // SM3 reserves the TEXCOORD semantic for point sprite texcoords (gl_PointCoord)
+        // In D3D11 we manually compute gl_PointCoord in the GS.
+        if (hlsl4)
+        {
+            info.glPointCoord.enable(varyingSemantic, reservedRegisterIndex++);
+        }
+        else
+        {
+            info.glPointCoord.enable("TEXCOORD", 0);
+        }
+    }
+
+    // Special case: do not include PSIZE semantic in HLSL 3 pixel shaders
+    if (pointSize && (!pixelShader || hlsl4))
+    {
+        info.glPointSize.enableSystem("PSIZE");
+    }
+
+    return info;
+}
+
+std::string DynamicHLSL::generateVaryingLinkHLSL(const SemanticInfo &info, const std::string &varyingHLSL) const
+{
+    std::string linkHLSL = "{\n";
+
+    ASSERT(info.dxPosition.enabled && info.glPosition.enabled);
+
+    linkHLSL += "    float4 dx_Position : " + info.dxPosition.str() + ";\n";
+    linkHLSL += "    float4 gl_Position : " + info.glPosition.str() + ";\n";
+
+    if (info.glFragCoord.enabled)
+    {
+        linkHLSL += "    float4 gl_FragCoord : " + info.glFragCoord.str() + ";\n";
+    }
+
+    if (info.glPointCoord.enabled)
+    {
+        linkHLSL += "    float2 gl_PointCoord : " + info.glPointCoord.str() + ";\n";
+    }
+
+    linkHLSL += varyingHLSL;
+
+    if (info.glPointSize.enabled)
+    {
+        linkHLSL += "    float gl_PointSize : " + info.glPointSize.str() + ";\n";
+    }
+
+    linkHLSL += "};\n";
+
+    return linkHLSL;
+}
+
+void DynamicHLSL::storeBuiltinLinkedVaryings(const SemanticInfo &info,
+                                             std::vector<LinkedVarying> *linkedVaryings) const
+{
+    ASSERT(info.glPosition.enabled);
+
+    linkedVaryings->push_back(LinkedVarying("gl_Position", GL_FLOAT_VEC4, 1, info.glPosition.semantic,
+                                            info.glPosition.index, 1));
+
+    if (info.glFragCoord.enabled)
+    {
+        linkedVaryings->push_back(LinkedVarying("gl_FragCoord", GL_FLOAT_VEC4, 1, info.glFragCoord.semantic,
+                                                info.glFragCoord.index, 1));
+    }
+
+    if (info.glPointSize.enabled)
+    {
+        linkedVaryings->push_back(LinkedVarying("gl_PointSize", GL_FLOAT, 1, "PSIZE", 0, 1));
+    }
+}
+
+void DynamicHLSL::storeUserLinkedVaryings(const rx::ShaderD3D *vertexShader,
+                                          std::vector<LinkedVarying> *linkedVaryings) const
+{
+    const std::string &varyingSemantic = getVaryingSemantic(vertexShader->mUsesPointSize);
+    const std::vector<PackedVarying> &varyings = vertexShader->getVaryings();
+
+    for (unsigned int varyingIndex = 0; varyingIndex < varyings.size(); varyingIndex++)
+    {
+        const PackedVarying &varying = varyings[varyingIndex];
+
+        if (varying.registerAssigned())
+        {
+            ASSERT(!varying.isBuiltIn());
+            GLenum transposedType = TransposeMatrixType(varying.type);
+            int variableRows = (varying.isStruct() ? 1 : VariableRowCount(transposedType));
+
+            linkedVaryings->push_back(LinkedVarying(varying.name, varying.type, varying.elementCount(),
+                                                    varyingSemantic, varying.registerIndex,
+                                                    variableRows * varying.elementCount()));
+        }
+    }
+}
+
+bool DynamicHLSL::generateShaderLinkHLSL(InfoLog &infoLog, int registers, const VaryingPacking packing,
+                                         std::string& pixelHLSL, std::string& vertexHLSL,
+                                         rx::ShaderD3D *fragmentShader, rx::ShaderD3D *vertexShader,
+                                         const std::vector<std::string>& transformFeedbackVaryings,
+                                         std::vector<LinkedVarying> *linkedVaryings,
+                                         std::map<int, VariableLocation> *programOutputVars,
+                                         std::vector<PixelShaderOutputVariable> *outPixelShaderKey,
+                                         bool *outUsesFragDepth) const
+{
+    if (pixelHLSL.empty() || vertexHLSL.empty())
+    {
+        return false;
+    }
+
+    bool usesMRT = fragmentShader->mUsesMultipleRenderTargets;
+    bool usesFragColor = fragmentShader->mUsesFragColor;
+    bool usesFragData = fragmentShader->mUsesFragData;
+    bool usesFragCoord = fragmentShader->mUsesFragCoord;
+    bool usesPointCoord = fragmentShader->mUsesPointCoord;
+    bool usesPointSize = vertexShader->mUsesPointSize;
+
+    if (usesFragColor && usesFragData)
+    {
+        infoLog.append("Cannot use both gl_FragColor and gl_FragData in the same fragment shader.");
+        return false;
+    }
+
+    // Write the HLSL input/output declarations
+    const int shaderModel = mRenderer->getMajorShaderModel();
+
+    // TODO (geofflang):  Use context's caps
+    const int maxVaryingVectors = mRenderer->getRendererCaps().maxVaryingVectors;
+
+    const int registersNeeded = registers + (usesFragCoord ? 1 : 0) + (usesPointCoord ? 1 : 0);
+
+    // Two cases when writing to gl_FragColor and using ESSL 1.0:
+    // - with a 3.0 context, the output color is copied to channel 0
+    // - with a 2.0 context, the output color is broadcast to all channels
+    const bool broadcast = (fragmentShader->mUsesFragColor && mRenderer->getCurrentClientVersion() < 3);
+    const unsigned int numRenderTargets = (broadcast || usesMRT ? mRenderer->getRendererCaps().maxDrawBuffers : 1);
+
+    int shaderVersion = vertexShader->getShaderVersion();
+
+    if (registersNeeded > maxVaryingVectors)
+    {
+        infoLog.append("No varying registers left to support gl_FragCoord/gl_PointCoord");
+        return false;
+    }
+
+    const std::string &varyingHLSL = generateVaryingHLSL(vertexShader);
+    const SemanticInfo &vertexSemantics = getSemanticInfo(registers, usesFragCoord,
+                                                          false, usesPointSize, false);
+
+    storeUserLinkedVaryings(vertexShader, linkedVaryings);
+    storeBuiltinLinkedVaryings(vertexSemantics, linkedVaryings);
+
+    // Add stub string to be replaced when shader is dynamically defined by its layout
+    vertexHLSL += "\n" + VERTEX_ATTRIBUTE_STUB_STRING + "\n"
+                  "struct VS_OUTPUT\n" + generateVaryingLinkHLSL(vertexSemantics, varyingHLSL) + "\n"
+                  "VS_OUTPUT main(VS_INPUT input)\n"
+                  "{\n"
+                  "    initAttributes(input);\n";
+
+    if (shaderModel >= 4)
+    {
+        vertexHLSL += "\n"
+                      "    gl_main();\n"
+                      "\n"
+                      "    VS_OUTPUT output;\n"
+                      "    output.gl_Position = gl_Position;\n"
+                      "    output.dx_Position.x = gl_Position.x;\n"
+                      "    output.dx_Position.y = -gl_Position.y;\n"
+                      "    output.dx_Position.z = (gl_Position.z + gl_Position.w) * 0.5;\n"
+                      "    output.dx_Position.w = gl_Position.w;\n";
+    }
+    else
+    {
+        vertexHLSL += "\n"
+                      "    gl_main();\n"
+                      "\n"
+                      "    VS_OUTPUT output;\n"
+                      "    output.gl_Position = gl_Position;\n"
+                      "    output.dx_Position.x = gl_Position.x * dx_ViewAdjust.z + dx_ViewAdjust.x * gl_Position.w;\n"
+                      "    output.dx_Position.y = -(gl_Position.y * dx_ViewAdjust.w + dx_ViewAdjust.y * gl_Position.w);\n"
+                      "    output.dx_Position.z = (gl_Position.z + gl_Position.w) * 0.5;\n"
+                      "    output.dx_Position.w = gl_Position.w;\n";
+    }
+
+    if (usesPointSize && shaderModel >= 3)
+    {
+        vertexHLSL += "    output.gl_PointSize = gl_PointSize;\n";
+    }
+
+    if (usesFragCoord)
+    {
+        vertexHLSL += "    output.gl_FragCoord = gl_Position;\n";
+    }
+
+    const std::vector<PackedVarying> &vertexVaryings = vertexShader->getVaryings();
+    for (unsigned int vertVaryingIndex = 0; vertVaryingIndex < vertexVaryings.size(); vertVaryingIndex++)
+    {
+        const PackedVarying &varying = vertexVaryings[vertVaryingIndex];
+        if (varying.registerAssigned())
+        {
+            for (unsigned int elementIndex = 0; elementIndex < varying.elementCount(); elementIndex++)
+            {
+                int variableRows = (varying.isStruct() ? 1 : VariableRowCount(TransposeMatrixType(varying.type)));
+
+                for (int row = 0; row < variableRows; row++)
+                {
+                    int r = varying.registerIndex + varying.columnIndex * mRenderer->getRendererCaps().maxVaryingVectors + elementIndex * variableRows + row;
+                    vertexHLSL += "    output.v" + Str(r);
+
+                    vertexHLSL += " = _" + varying.name;
+
+                    if (varying.isArray())
+                    {
+                        vertexHLSL += ArrayString(elementIndex);
+                    }
+
+                    if (variableRows > 1)
+                    {
+                        vertexHLSL += ArrayString(row);
+                    }
+
+                    vertexHLSL += ";\n";
+                }
+            }
+        }
+    }
+
+    vertexHLSL += "\n"
+                  "    return output;\n"
+                  "}\n";
+
+    const SemanticInfo &pixelSemantics = getSemanticInfo(registers, usesFragCoord, usesPointCoord,
+                                                         usesPointSize, true);
+
+    pixelHLSL += "struct PS_INPUT\n" + generateVaryingLinkHLSL(pixelSemantics, varyingHLSL) + "\n";
+
+    if (shaderVersion < 300)
+    {
+        for (unsigned int renderTargetIndex = 0; renderTargetIndex < numRenderTargets; renderTargetIndex++)
+        {
+            PixelShaderOutputVariable outputKeyVariable;
+            outputKeyVariable.type = GL_FLOAT_VEC4;
+            outputKeyVariable.name = "gl_Color" + Str(renderTargetIndex);
+            outputKeyVariable.source = broadcast ? "gl_Color[0]" : "gl_Color[" + Str(renderTargetIndex) + "]";
+            outputKeyVariable.outputIndex = renderTargetIndex;
+
+            outPixelShaderKey->push_back(outputKeyVariable);
+        }
+
+        *outUsesFragDepth = fragmentShader->mUsesFragDepth;
+    }
+    else
+    {
+        defineOutputVariables(fragmentShader, programOutputVars);
+
+        const std::vector<sh::Attribute> &shaderOutputVars = fragmentShader->getActiveOutputVariables();
+        for (auto locationIt = programOutputVars->begin(); locationIt != programOutputVars->end(); locationIt++)
+        {
+            const VariableLocation &outputLocation = locationIt->second;
+            const sh::ShaderVariable &outputVariable = shaderOutputVars[outputLocation.index];
+            const std::string &variableName = "out_" + outputLocation.name;
+            const std::string &elementString = (outputLocation.element == GL_INVALID_INDEX ? "" : Str(outputLocation.element));
+
+            ASSERT(outputVariable.staticUse);
+
+            PixelShaderOutputVariable outputKeyVariable;
+            outputKeyVariable.type = outputVariable.type;
+            outputKeyVariable.name = variableName + elementString;
+            outputKeyVariable.source = variableName + ArrayString(outputLocation.element);
+            outputKeyVariable.outputIndex = locationIt->first;
+
+            outPixelShaderKey->push_back(outputKeyVariable);
+        }
+
+        *outUsesFragDepth = false;
+    }
+
+    pixelHLSL += PIXEL_OUTPUT_STUB_STRING + "\n";
+
+    if (fragmentShader->mUsesFrontFacing)
+    {
+        if (shaderModel >= 4)
+        {
+            pixelHLSL += "PS_OUTPUT main(PS_INPUT input, bool isFrontFace : SV_IsFrontFace)\n"
+                         "{\n";
+        }
+        else
+        {
+            pixelHLSL += "PS_OUTPUT main(PS_INPUT input, float vFace : VFACE)\n"
+                         "{\n";
+        }
+    }
+    else
+    {
+        pixelHLSL += "PS_OUTPUT main(PS_INPUT input)\n"
+                     "{\n";
+    }
+
+    if (usesFragCoord)
+    {
+        pixelHLSL += "    float rhw = 1.0 / input.gl_FragCoord.w;\n";
+
+        if (shaderModel >= 4)
+        {
+            pixelHLSL += "    gl_FragCoord.x = input.dx_Position.x;\n"
+                         "    gl_FragCoord.y = input.dx_Position.y;\n";
+        }
+        else if (shaderModel >= 3)
+        {
+            pixelHLSL += "    gl_FragCoord.x = input.dx_Position.x + 0.5;\n"
+                         "    gl_FragCoord.y = input.dx_Position.y + 0.5;\n";
+        }
+        else
+        {
+            // dx_ViewCoords contains the viewport width/2, height/2, center.x and center.y. See Renderer::setViewport()
+            pixelHLSL += "    gl_FragCoord.x = (input.gl_FragCoord.x * rhw) * dx_ViewCoords.x + dx_ViewCoords.z;\n"
+                         "    gl_FragCoord.y = (input.gl_FragCoord.y * rhw) * dx_ViewCoords.y + dx_ViewCoords.w;\n";
+        }
+
+        pixelHLSL += "    gl_FragCoord.z = (input.gl_FragCoord.z * rhw) * dx_DepthFront.x + dx_DepthFront.y;\n"
+                     "    gl_FragCoord.w = rhw;\n";
+    }
+
+    if (usesPointCoord && shaderModel >= 3)
+    {
+        pixelHLSL += "    gl_PointCoord.x = input.gl_PointCoord.x;\n";
+        pixelHLSL += "    gl_PointCoord.y = 1.0 - input.gl_PointCoord.y;\n";
+    }
+
+    if (fragmentShader->mUsesFrontFacing)
+    {
+        if (shaderModel <= 3)
+        {
+            pixelHLSL += "    gl_FrontFacing = (vFace * dx_DepthFront.z >= 0.0);\n";
+        }
+        else
+        {
+            pixelHLSL += "    gl_FrontFacing = isFrontFace;\n";
+        }
+    }
+
+    const std::vector<PackedVarying> &fragmentVaryings = fragmentShader->getVaryings();
+    for (unsigned int varyingIndex = 0; varyingIndex < fragmentVaryings.size(); varyingIndex++)
+    {
+        const PackedVarying &varying = fragmentVaryings[varyingIndex];
+        if (varying.registerAssigned())
+        {
+            ASSERT(!varying.isBuiltIn());
+            for (unsigned int elementIndex = 0; elementIndex < varying.elementCount(); elementIndex++)
+            {
+                GLenum transposedType = TransposeMatrixType(varying.type);
+                int variableRows = (varying.isStruct() ? 1 : VariableRowCount(transposedType));
+                for (int row = 0; row < variableRows; row++)
+                {
+                    std::string n = Str(varying.registerIndex + varying.columnIndex * mRenderer->getRendererCaps().maxVaryingVectors + elementIndex * variableRows + row);
+                    pixelHLSL += "    _" + varying.name;
+
+                    if (varying.isArray())
+                    {
+                        pixelHLSL += ArrayString(elementIndex);
+                    }
+
+                    if (variableRows > 1)
+                    {
+                        pixelHLSL += ArrayString(row);
+                    }
+
+                    if (varying.isStruct())
+                    {
+                        pixelHLSL += " = input.v" + n + ";\n";   break;
+                    }
+                    else
+                    {
+                        switch (VariableColumnCount(transposedType))
+                        {
+                          case 1: pixelHLSL += " = input.v" + n + ".x;\n";   break;
+                          case 2: pixelHLSL += " = input.v" + n + ".xy;\n";  break;
+                          case 3: pixelHLSL += " = input.v" + n + ".xyz;\n"; break;
+                          case 4: pixelHLSL += " = input.v" + n + ";\n";     break;
+                          default: UNREACHABLE();
+                        }
+                    }
+                }
+            }
+        }
+        else
+        {
+            ASSERT(varying.isBuiltIn() || !varying.staticUse);
+        }
+    }
+
+    pixelHLSL += "\n"
+                 "    gl_main();\n"
+                 "\n"
+                 "    return generateOutput();\n"
+                 "}\n";
+
+    return true;
+}
+
+void DynamicHLSL::defineOutputVariables(rx::ShaderD3D *fragmentShader, std::map<int, VariableLocation> *programOutputVars) const
+{
+    const std::vector<sh::Attribute> &shaderOutputVars = fragmentShader->getActiveOutputVariables();
+
+    for (unsigned int outputVariableIndex = 0; outputVariableIndex < shaderOutputVars.size(); outputVariableIndex++)
+    {
+        const sh::Attribute &outputVariable = shaderOutputVars[outputVariableIndex];
+        const int baseLocation = outputVariable.location == -1 ? 0 : outputVariable.location;
+
+        ASSERT(outputVariable.staticUse);
+
+        if (outputVariable.arraySize > 0)
+        {
+            for (unsigned int elementIndex = 0; elementIndex < outputVariable.arraySize; elementIndex++)
+            {
+                const int location = baseLocation + elementIndex;
+                ASSERT(programOutputVars->count(location) == 0);
+                (*programOutputVars)[location] = VariableLocation(outputVariable.name, elementIndex, outputVariableIndex);
+            }
+        }
+        else
+        {
+            ASSERT(programOutputVars->count(baseLocation) == 0);
+            (*programOutputVars)[baseLocation] = VariableLocation(outputVariable.name, GL_INVALID_INDEX, outputVariableIndex);
+        }
+    }
+}
+
+std::string DynamicHLSL::generateGeometryShaderHLSL(int registers, rx::ShaderD3D *fragmentShader, rx::ShaderD3D *vertexShader) const
+{
+    // for now we only handle point sprite emulation
+    ASSERT(vertexShader->mUsesPointSize && mRenderer->getMajorShaderModel() >= 4);
+    return generatePointSpriteHLSL(registers, fragmentShader, vertexShader);
+}
+
+std::string DynamicHLSL::generatePointSpriteHLSL(int registers, rx::ShaderD3D *fragmentShader, rx::ShaderD3D *vertexShader) const
+{
+    ASSERT(registers >= 0);
+    ASSERT(vertexShader->mUsesPointSize);
+    ASSERT(mRenderer->getMajorShaderModel() >= 4);
+
+    std::string geomHLSL;
+
+    const SemanticInfo &inSemantics = getSemanticInfo(registers, fragmentShader->mUsesFragCoord,
+                                                      false, true, false);
+    const SemanticInfo &outSemantics = getSemanticInfo(registers, fragmentShader->mUsesFragCoord,
+                                                       fragmentShader->mUsesPointCoord, true, false);
+
+    std::string varyingHLSL = generateVaryingHLSL(vertexShader);
+    std::string inLinkHLSL = generateVaryingLinkHLSL(inSemantics, varyingHLSL);
+    std::string outLinkHLSL = generateVaryingLinkHLSL(outSemantics, varyingHLSL);
+
+    // TODO(geofflang): use context's caps
+    geomHLSL += "uniform float4 dx_ViewCoords : register(c1);\n"
+                "\n"
+                "struct GS_INPUT\n" + inLinkHLSL + "\n" +
+                "struct GS_OUTPUT\n" + outLinkHLSL + "\n" +
+                "\n"
+                  "static float2 pointSpriteCorners[] = \n"
+                  "{\n"
+                  "    float2( 0.5f, -0.5f),\n"
+                  "    float2( 0.5f,  0.5f),\n"
+                  "    float2(-0.5f, -0.5f),\n"
+                  "    float2(-0.5f,  0.5f)\n"
+                  "};\n"
+                  "\n"
+                  "static float2 pointSpriteTexcoords[] = \n"
+                  "{\n"
+                  "    float2(1.0f, 1.0f),\n"
+                  "    float2(1.0f, 0.0f),\n"
+                  "    float2(0.0f, 1.0f),\n"
+                  "    float2(0.0f, 0.0f)\n"
+                  "};\n"
+                  "\n"
+                  "static float minPointSize = " + Str(mRenderer->getRendererCaps().minAliasedPointSize) + ".0f;\n"
+                  "static float maxPointSize = " + Str(mRenderer->getRendererCaps().maxAliasedPointSize) + ".0f;\n"
+                  "\n"
+                  "[maxvertexcount(4)]\n"
+                  "void main(point GS_INPUT input[1], inout TriangleStream<GS_OUTPUT> outStream)\n"
+                  "{\n"
+                  "    GS_OUTPUT output = (GS_OUTPUT)0;\n"
+                  "    output.gl_Position = input[0].gl_Position;\n";
+                  "    output.gl_PointSize = input[0].gl_PointSize;\n";
+
+    for (int r = 0; r < registers; r++)
+    {
+        geomHLSL += "    output.v" + Str(r) + " = input[0].v" + Str(r) + ";\n";
+    }
+
+    if (fragmentShader->mUsesFragCoord)
+    {
+        geomHLSL += "    output.gl_FragCoord = input[0].gl_FragCoord;\n";
+    }
+
+    geomHLSL += "    \n"
+                "    float gl_PointSize = clamp(input[0].gl_PointSize, minPointSize, maxPointSize);\n"
+                "    float4 dx_Position = input[0].dx_Position;\n"
+                "    float2 viewportScale = float2(1.0f / dx_ViewCoords.x, 1.0f / dx_ViewCoords.y) * dx_Position.w;\n";
+
+    for (int corner = 0; corner < 4; corner++)
+    {
+        geomHLSL += "    \n"
+                    "    output.dx_Position = dx_Position + float4(pointSpriteCorners[" + Str(corner) + "] * viewportScale * gl_PointSize, 0.0f, 0.0f);\n";
+
+        if (fragmentShader->mUsesPointCoord)
+        {
+            geomHLSL += "    output.gl_PointCoord = pointSpriteTexcoords[" + Str(corner) + "];\n";
+        }
+
+        geomHLSL += "    outStream.Append(output);\n";
+    }
+
+    geomHLSL += "    \n"
+                "    outStream.RestartStrip();\n"
+                "}\n";
+
+    return geomHLSL;
+}
+
+// This method needs to match OutputHLSL::decorate
+std::string DynamicHLSL::decorateVariable(const std::string &name)
+{
+    if (name.compare(0, 3, "gl_") != 0)
+    {
+        return "_" + name;
+    }
+
+    return name;
+}
+
+std::string DynamicHLSL::generateAttributeConversionHLSL(const VertexFormat &vertexFormat, const sh::ShaderVariable &shaderAttrib) const
+{
+    std::string attribString = "input." + decorateVariable(shaderAttrib.name);
+
+    // Matrix
+    if (IsMatrixType(shaderAttrib.type))
+    {
+        return "transpose(" + attribString + ")";
+    }
+
+    GLenum shaderComponentType = VariableComponentType(shaderAttrib.type);
+    int shaderComponentCount = VariableComponentCount(shaderAttrib.type);
+
+    // Perform integer to float conversion (if necessary)
+    bool requiresTypeConversion = (shaderComponentType == GL_FLOAT && vertexFormat.mType != GL_FLOAT);
+
+    if (requiresTypeConversion)
+    {
+        // TODO: normalization for 32-bit integer formats
+        ASSERT(!vertexFormat.mNormalized && !vertexFormat.mPureInteger);
+        return "float" + Str(shaderComponentCount) + "(" + attribString + ")";
+    }
+
+    // No conversion necessary
+    return attribString;
+}
+
+void DynamicHLSL::getInputLayoutSignature(const VertexFormat inputLayout[], GLenum signature[]) const
+{
+    for (size_t inputIndex = 0; inputIndex < MAX_VERTEX_ATTRIBS; inputIndex++)
+    {
+        const VertexFormat &vertexFormat = inputLayout[inputIndex];
+
+        if (vertexFormat.mType == GL_NONE)
+        {
+            signature[inputIndex] = GL_NONE;
+        }
+        else
+        {
+            bool gpuConverted = ((mRenderer->getVertexConversionType(vertexFormat) & rx::VERTEX_CONVERT_GPU) != 0);
+            signature[inputIndex] = (gpuConverted ? GL_TRUE : GL_FALSE);
+        }
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/DynamicHLSL.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/DynamicHLSL.h
new file mode 100644
index 0000000000..f68ed98401
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/DynamicHLSL.h
@@ -0,0 +1,104 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+// DynamicHLSL.h: Interface for link and run-time HLSL generation
+//
+
+#ifndef LIBGLESV2_RENDERER_DYNAMIC_HLSL_H_
+#define LIBGLESV2_RENDERER_DYNAMIC_HLSL_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/constants.h"
+
+#include "angle_gl.h"
+
+#include <vector>
+#include <map>
+
+namespace rx
+{
+class Renderer;
+}
+
+namespace sh
+{
+struct Attribute;
+struct ShaderVariable;
+}
+
+namespace gl
+{
+class InfoLog;
+struct VariableLocation;
+struct LinkedVarying;
+struct VertexAttribute;
+struct VertexFormat;
+struct PackedVarying;
+}
+
+namespace rx
+{
+class Renderer;
+class ShaderD3D;
+
+typedef const gl::PackedVarying *VaryingPacking[gl::IMPLEMENTATION_MAX_VARYING_VECTORS][4];
+
+struct PixelShaderOutputVariable
+{
+    GLenum type;
+    std::string name;
+    std::string source;
+    size_t outputIndex;
+};
+
+class DynamicHLSL
+{
+  public:
+    explicit DynamicHLSL(rx::Renderer *const renderer);
+
+    int packVaryings(gl::InfoLog &infoLog, VaryingPacking packing, rx::ShaderD3D *fragmentShader,
+                     rx::ShaderD3D *vertexShader, const std::vector<std::string>& transformFeedbackVaryings);
+    std::string generateVertexShaderForInputLayout(const std::string &sourceShader, const gl::VertexFormat inputLayout[],
+                                                   const sh::Attribute shaderAttributes[]) const;
+    std::string generatePixelShaderForOutputSignature(const std::string &sourceShader, const std::vector<PixelShaderOutputVariable> &outputVariables,
+                                                      bool usesFragDepth, const std::vector<GLenum> &outputLayout) const;
+    bool generateShaderLinkHLSL(gl::InfoLog &infoLog, int registers, const VaryingPacking packing,
+                                std::string& pixelHLSL, std::string& vertexHLSL,
+                                rx::ShaderD3D *fragmentShader, rx::ShaderD3D *vertexShader,
+                                const std::vector<std::string>& transformFeedbackVaryings,
+                                std::vector<gl::LinkedVarying> *linkedVaryings,
+                                std::map<int, gl::VariableLocation> *programOutputVars,
+                                std::vector<PixelShaderOutputVariable> *outPixelShaderKey,
+                                bool *outUsesFragDepth) const;
+
+    std::string generateGeometryShaderHLSL(int registers, rx::ShaderD3D *fragmentShader, rx::ShaderD3D *vertexShader) const;
+    void getInputLayoutSignature(const gl::VertexFormat inputLayout[], GLenum signature[]) const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(DynamicHLSL);
+
+    rx::Renderer *const mRenderer;
+
+    struct SemanticInfo;
+
+    std::string getVaryingSemantic(bool pointSize) const;
+    SemanticInfo getSemanticInfo(int startRegisters, bool fragCoord, bool pointCoord, bool pointSize,
+                                        bool pixelShader) const;
+    std::string generateVaryingLinkHLSL(const SemanticInfo &info, const std::string &varyingHLSL) const;
+    std::string generateVaryingHLSL(const ShaderD3D *shader) const;
+    void storeUserLinkedVaryings(const rx::ShaderD3D *vertexShader, std::vector<gl::LinkedVarying> *linkedVaryings) const;
+    void storeBuiltinLinkedVaryings(const SemanticInfo &info, std::vector<gl::LinkedVarying> *linkedVaryings) const;
+    void defineOutputVariables(rx::ShaderD3D *fragmentShader, std::map<int, gl::VariableLocation> *programOutputVars) const;
+    std::string generatePointSpriteHLSL(int registers, rx::ShaderD3D *fragmentShader, rx::ShaderD3D *vertexShader) const;
+
+    // Prepend an underscore
+    static std::string decorateVariable(const std::string &name);
+
+    std::string generateAttributeConversionHLSL(const gl::VertexFormat &vertexFormat, const sh::ShaderVariable &shaderAttrib) const;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_DYNAMIC_HLSL_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
new file mode 100644
index 0000000000..d0131974ee
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
@@ -0,0 +1,164 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "libGLESv2/renderer/d3d/HLSLCompiler.h"
+#include "libGLESv2/Program.h"
+#include "libGLESv2/main.h"
+
+#include "common/utilities.h"
+#include "common/platform.h"
+
+#if defined(__MINGW32__) && !defined(D3DCOMPILER_DLL)
+
+// Add define + typedefs for older MinGW-w64 headers (pre 5783)
+
+#define D3DCOMPILER_DLL L"d3dcompiler_43.dll"
+
+HRESULT WINAPI D3DCompile(const void *data, SIZE_T data_size, const char *filename,
+        const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
+        const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **error_messages);
+typedef HRESULT (WINAPI *pD3DCompile)(const void *data, SIZE_T data_size, const char *filename,
+        const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
+        const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **error_messages);
+
+#endif // __MINGW32__ && !D3DCOMPILER_DLL
+
+#ifndef QT_D3DCOMPILER_DLL
+#define QT_D3DCOMPILER_DLL D3DCOMPILER_DLL
+#endif
+
+namespace rx
+{
+
+HLSLCompiler::HLSLCompiler()
+    : mD3DCompilerModule(NULL),
+      mD3DCompileFunc(NULL)
+{
+}
+
+HLSLCompiler::~HLSLCompiler()
+{
+    release();
+}
+
+bool HLSLCompiler::initialize()
+{
+#if !defined(ANGLE_PLATFORM_WINRT)
+#if defined(ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES)
+    // Find a D3DCompiler module that had already been loaded based on a predefined list of versions.
+    static const char *d3dCompilerNames[] = ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES;
+
+    for (size_t i = 0; i < ArraySize(d3dCompilerNames); ++i)
+    {
+        if (GetModuleHandleExA(0, d3dCompilerNames[i], &mD3DCompilerModule))
+        {
+            break;
+        }
+    }
+#endif  // ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES
+
+    // Load the compiler DLL specified by the environment, or default to QT_D3DCOMPILER_DLL
+    const wchar_t *defaultCompiler = _wgetenv(L"QT_D3DCOMPILER_DLL");
+    if (!defaultCompiler)
+        defaultCompiler = QT_D3DCOMPILER_DLL;
+
+    const wchar_t *compilerDlls[] = {
+        defaultCompiler,
+        L"d3dcompiler_47.dll",
+        L"d3dcompiler_46.dll",
+        L"d3dcompiler_45.dll",
+        L"d3dcompiler_44.dll",
+        L"d3dcompiler_43.dll",
+        0
+    };
+
+    // Load the first available known compiler DLL
+    for (int i = 0; compilerDlls[i]; ++i)
+    {
+        mD3DCompilerModule = LoadLibrary(compilerDlls[i]);
+        if (mD3DCompilerModule)
+            break;
+    }
+
+    if (!mD3DCompilerModule)
+    {
+        ERR("No D3D compiler module found - aborting!\n");
+        return false;
+    }
+
+    mD3DCompileFunc = reinterpret_cast<CompileFuncPtr>(GetProcAddress(mD3DCompilerModule, "D3DCompile"));
+    ASSERT(mD3DCompileFunc);
+#else
+    mD3DCompileFunc = reinterpret_cast<CompileFuncPtr>(&D3DCompile);
+#endif
+    return mD3DCompileFunc != NULL;
+}
+
+void HLSLCompiler::release()
+{
+    if (mD3DCompilerModule)
+    {
+        FreeLibrary(mD3DCompilerModule);
+        mD3DCompilerModule = NULL;
+        mD3DCompileFunc = NULL;
+    }
+}
+
+ShaderBlob *HLSLCompiler::compileToBinary(gl::InfoLog &infoLog, const char *hlsl, const char *profile,
+                                          const UINT optimizationFlags[], const char *flagNames[], int attempts) const
+{
+#if !defined(ANGLE_PLATFORM_WINRT)
+    ASSERT(mD3DCompilerModule && mD3DCompileFunc);
+#endif
+
+    if (!hlsl)
+    {
+        return NULL;
+    }
+
+    pD3DCompile compileFunc = reinterpret_cast<pD3DCompile>(mD3DCompileFunc);
+    for (int i = 0; i < attempts; ++i)
+    {
+        ID3DBlob *errorMessage = NULL;
+        ID3DBlob *binary = NULL;
+
+        HRESULT result = compileFunc(hlsl, strlen(hlsl), gl::g_fakepath, NULL, NULL, "main", profile, optimizationFlags[i], 0, &binary, &errorMessage);
+
+        if (errorMessage)
+        {
+            const char *message = (const char*)errorMessage->GetBufferPointer();
+
+            infoLog.appendSanitized(message);
+            TRACE("\n%s", hlsl);
+            TRACE("\n%s", message);
+
+            SafeRelease(errorMessage);
+        }
+
+        if (SUCCEEDED(result))
+        {
+            return (ShaderBlob*)binary;
+        }
+        else
+        {
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, (ShaderBlob*)NULL);
+            }
+
+            infoLog.append("Warning: D3D shader compilation failed with %s flags.", flagNames[i]);
+
+            if (i + 1 < attempts)
+            {
+                infoLog.append(" Retrying with %s.\n", flagNames[i + 1]);
+            }
+        }
+    }
+
+    return NULL;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.h
new file mode 100644
index 0000000000..0ce9e44be5
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.h
@@ -0,0 +1,38 @@
+#ifndef LIBGLESV2_RENDERER_HLSL_D3DCOMPILER_H_
+#define LIBGLESV2_RENDERER_HLSL_D3DCOMPILER_H_
+
+#include "common/angleutils.h"
+
+namespace gl
+{
+class InfoLog;
+}
+
+namespace rx
+{
+
+typedef void* ShaderBlob;
+typedef void(*CompileFuncPtr)();
+
+class HLSLCompiler
+{
+  public:
+    HLSLCompiler();
+    ~HLSLCompiler();
+
+    bool initialize();
+    void release();
+
+    ShaderBlob *compileToBinary(gl::InfoLog &infoLog, const char *hlsl, const char *profile,
+                                const UINT optimizationFlags[], const char *flagNames[], int attempts) const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(HLSLCompiler);
+
+    HMODULE mD3DCompilerModule;
+    CompileFuncPtr mD3DCompileFunc;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_HLSL_D3DCOMPILER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ImageD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ImageD3D.cpp
new file mode 100644
index 0000000000..0854b968da
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ImageD3D.cpp
@@ -0,0 +1,26 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Image.h: Implements the rx::Image class, an abstract base class for the
+// renderer-specific classes which will define the interface to the underlying
+// surfaces or resources.
+
+#include "libGLESv2/renderer/d3d/ImageD3D.h"
+
+namespace rx
+{
+
+ImageD3D::ImageD3D()
+{
+}
+
+ImageD3D *ImageD3D::makeImageD3D(Image *img)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(rx::ImageD3D*, img));
+    return static_cast<rx::ImageD3D*>(img);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ImageD3D.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ImageD3D.h
new file mode 100644
index 0000000000..60a6ffdf37
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ImageD3D.h
@@ -0,0 +1,51 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Image.h: Defines the rx::Image class, an abstract base class for the
+// renderer-specific classes which will define the interface to the underlying
+// surfaces or resources.
+
+#ifndef LIBGLESV2_RENDERER_IMAGED3D_H_
+#define LIBGLESV2_RENDERER_IMAGED3D_H_
+
+#include "common/debug.h"
+#include "libGLESv2/renderer/Image.h"
+
+namespace gl
+{
+class Framebuffer;
+}
+
+namespace rx
+{
+class TextureStorage;
+
+class ImageD3D : public Image
+{
+  public:
+    ImageD3D();
+    virtual ~ImageD3D() {};
+
+    static ImageD3D *makeImageD3D(Image *img);
+
+    virtual bool isDirty() const = 0;
+
+    virtual void setManagedSurface2D(TextureStorage *storage, int level) {};
+    virtual void setManagedSurfaceCube(TextureStorage *storage, int face, int level) {};
+    virtual void setManagedSurface3D(TextureStorage *storage, int level) {};
+    virtual void setManagedSurface2DArray(TextureStorage *storage, int layer, int level) {};
+    virtual bool copyToStorage2D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height) = 0;
+    virtual bool copyToStorageCube(TextureStorage *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height) = 0;
+    virtual bool copyToStorage3D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth) = 0;
+    virtual bool copyToStorage2DArray(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height) = 0;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(ImageD3D);
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_IMAGED3D_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexBuffer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexBuffer.cpp
index 37dbd3e195..1dce1270d8 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexBuffer.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexBuffer.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -8,7 +7,7 @@
 // IndexBuffer.cpp: Defines the abstract IndexBuffer class and IndexBufferInterface
 // class with derivations, classes that perform graphics API agnostic index buffer operations.
 
-#include "libGLESv2/renderer/IndexBuffer.h"
+#include "libGLESv2/renderer/d3d/IndexBuffer.h"
 #include "libGLESv2/renderer/Renderer.h"
 
 namespace rx
@@ -67,21 +66,22 @@ unsigned int IndexBufferInterface::getSerial() const
     return mIndexBuffer->getSerial();
 }
 
-bool IndexBufferInterface::mapBuffer(unsigned int size, void** outMappedMemory, unsigned int *streamOffset)
+gl::Error IndexBufferInterface::mapBuffer(unsigned int size, void** outMappedMemory, unsigned int *streamOffset)
 {
     // Protect against integer overflow
     if (mWritePosition + size < mWritePosition)
     {
-        return false;
+        return gl::Error(GL_OUT_OF_MEMORY, "Mapping of internal index buffer would cause an integer overflow.");
     }
 
-    if (!mIndexBuffer->mapBuffer(mWritePosition, size, outMappedMemory))
+    gl::Error error = mIndexBuffer->mapBuffer(mWritePosition, size, outMappedMemory);
+    if (error.isError())
     {
         if (outMappedMemory)
         {
             *outMappedMemory = NULL;
         }
-        return false;
+        return error;
     }
 
     if (streamOffset)
@@ -90,10 +90,10 @@ bool IndexBufferInterface::mapBuffer(unsigned int size, void** outMappedMemory,
     }
 
     mWritePosition += size;
-    return true;
+    return gl::Error(GL_NO_ERROR);
 }
 
-bool IndexBufferInterface::unmapBuffer()
+gl::Error IndexBufferInterface::unmapBuffer()
 {
     return mIndexBuffer->unmapBuffer();
 }
@@ -113,12 +113,12 @@ void IndexBufferInterface::setWritePosition(unsigned int writePosition)
     mWritePosition = writePosition;
 }
 
-bool IndexBufferInterface::discard()
+gl::Error IndexBufferInterface::discard()
 {
     return mIndexBuffer->discard();
 }
 
-bool IndexBufferInterface::setBufferSize(unsigned int bufferSize, GLenum indexType)
+gl::Error IndexBufferInterface::setBufferSize(unsigned int bufferSize, GLenum indexType)
 {
     if (mIndexBuffer->getBufferSize() == 0)
     {
@@ -138,26 +138,30 @@ StreamingIndexBufferInterface::~StreamingIndexBufferInterface()
 {
 }
 
-bool StreamingIndexBufferInterface::reserveBufferSpace(unsigned int size, GLenum indexType)
+gl::Error StreamingIndexBufferInterface::reserveBufferSpace(unsigned int size, GLenum indexType)
 {
-    bool result = true;
     unsigned int curBufferSize = getBufferSize();
     unsigned int writePos = getWritePosition();
     if (size > curBufferSize)
     {
-        result = setBufferSize(std::max(size, 2 * curBufferSize), indexType);
+        gl::Error error = setBufferSize(std::max(size, 2 * curBufferSize), indexType);
+        if (error.isError())
+        {
+            return error;
+        }
         setWritePosition(0);
     }
     else if (writePos + size > curBufferSize || writePos + size < writePos)
     {
-        if (!discard())
+        gl::Error error = discard();
+        if (error.isError())
         {
-            return false;
+            return error;
         }
         setWritePosition(0);
     }
 
-    return result;
+    return gl::Error(GL_NO_ERROR);
 }
 
 
@@ -169,7 +173,7 @@ StaticIndexBufferInterface::~StaticIndexBufferInterface()
 {
 }
 
-bool StaticIndexBufferInterface::reserveBufferSpace(unsigned int size, GLenum indexType)
+gl::Error StaticIndexBufferInterface::reserveBufferSpace(unsigned int size, GLenum indexType)
 {
     unsigned int curSize = getBufferSize();
     if (curSize == 0)
@@ -178,13 +182,12 @@ bool StaticIndexBufferInterface::reserveBufferSpace(unsigned int size, GLenum in
     }
     else if (curSize >= size && indexType == getIndexType())
     {
-        return true;
+        return gl::Error(GL_NO_ERROR);
     }
     else
     {
-        ERR("Static index buffers can't be resized");
         UNREACHABLE();
-        return false;
+        return gl::Error(GL_INVALID_OPERATION, "Internal static index buffers can't be resized");
     }
 }
 
@@ -194,4 +197,3 @@ IndexRangeCache *StaticIndexBufferInterface::getIndexRangeCache()
 }
 
 }
-
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexBuffer.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexBuffer.h
index 6fb885a1cd..1bb5ae2c4a 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexBuffer.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexBuffer.h
@@ -11,6 +11,7 @@
 #define LIBGLESV2_RENDERER_INDEXBUFFER_H_
 
 #include "common/angleutils.h"
+#include "libGLESv2/Error.h"
 #include "libGLESv2/renderer/IndexRangeCache.h"
 
 namespace rx
@@ -23,16 +24,16 @@ class IndexBuffer
     IndexBuffer();
     virtual ~IndexBuffer();
 
-    virtual bool initialize(unsigned int bufferSize, GLenum indexType, bool dynamic) = 0;
+    virtual gl::Error initialize(unsigned int bufferSize, GLenum indexType, bool dynamic) = 0;
 
-    virtual bool mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory) = 0;
-    virtual bool unmapBuffer() = 0;
+    virtual gl::Error mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory) = 0;
+    virtual gl::Error unmapBuffer() = 0;
 
-    virtual bool discard() = 0;
+    virtual gl::Error discard() = 0;
 
     virtual GLenum getIndexType() const = 0;
     virtual unsigned int getBufferSize() const = 0;
-    virtual bool setSize(unsigned int bufferSize, GLenum indexType) = 0;
+    virtual gl::Error setSize(unsigned int bufferSize, GLenum indexType) = 0;
 
     unsigned int getSerial() const;
 
@@ -52,15 +53,15 @@ class IndexBufferInterface
     IndexBufferInterface(Renderer *renderer, bool dynamic);
     virtual ~IndexBufferInterface();
 
-    virtual bool reserveBufferSpace(unsigned int size, GLenum indexType) = 0;
+    virtual gl::Error reserveBufferSpace(unsigned int size, GLenum indexType) = 0;
 
     GLenum getIndexType() const;
     unsigned int getBufferSize() const;
 
     unsigned int getSerial() const;
 
-    bool mapBuffer(unsigned int size, void** outMappedMemory, unsigned int *streamOffset);
-    bool unmapBuffer();
+    gl::Error mapBuffer(unsigned int size, void** outMappedMemory, unsigned int *streamOffset);
+    gl::Error unmapBuffer();
 
     IndexBuffer *getIndexBuffer() const;
 
@@ -68,9 +69,9 @@ class IndexBufferInterface
     unsigned int getWritePosition() const;
     void setWritePosition(unsigned int writePosition);
 
-    bool discard();
+    gl::Error discard();
 
-    bool setBufferSize(unsigned int bufferSize, GLenum indexType);
+    gl::Error setBufferSize(unsigned int bufferSize, GLenum indexType);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(IndexBufferInterface);
@@ -89,7 +90,7 @@ class StreamingIndexBufferInterface : public IndexBufferInterface
     StreamingIndexBufferInterface(Renderer *renderer);
     ~StreamingIndexBufferInterface();
 
-    virtual bool reserveBufferSpace(unsigned int size, GLenum indexType);
+    virtual gl::Error reserveBufferSpace(unsigned int size, GLenum indexType);
 };
 
 class StaticIndexBufferInterface : public IndexBufferInterface
@@ -98,7 +99,7 @@ class StaticIndexBufferInterface : public IndexBufferInterface
     explicit StaticIndexBufferInterface(Renderer *renderer);
     ~StaticIndexBufferInterface();
 
-    virtual bool reserveBufferSpace(unsigned int size, GLenum indexType);
+    virtual gl::Error reserveBufferSpace(unsigned int size, GLenum indexType);
 
     IndexRangeCache *getIndexRangeCache();
 
@@ -108,4 +109,4 @@ class StaticIndexBufferInterface : public IndexBufferInterface
 
 }
 
-#endif // LIBGLESV2_RENDERER_INDEXBUFFER_H_
\ No newline at end of file
+#endif // LIBGLESV2_RENDERER_INDEXBUFFER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexDataManager.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexDataManager.cpp
new file mode 100644
index 0000000000..8d455b4bf3
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexDataManager.cpp
@@ -0,0 +1,255 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// IndexDataManager.cpp: Defines the IndexDataManager, a class that
+// runs the Buffer translation process for index buffers.
+
+#include "libGLESv2/renderer/d3d/IndexDataManager.h"
+#include "libGLESv2/renderer/d3d/BufferD3D.h"
+#include "libGLESv2/renderer/d3d/IndexBuffer.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/formatutils.h"
+
+namespace rx
+{
+
+static void ConvertIndices(GLenum sourceType, GLenum destinationType, const void *input, GLsizei count, void *output)
+{
+    if (sourceType == GL_UNSIGNED_BYTE)
+    {
+        ASSERT(destinationType == GL_UNSIGNED_SHORT);
+        const GLubyte *in = static_cast<const GLubyte*>(input);
+        GLushort *out = static_cast<GLushort*>(output);
+
+        for (GLsizei i = 0; i < count; i++)
+        {
+            out[i] = in[i];
+        }
+    }
+    else if (sourceType == GL_UNSIGNED_INT)
+    {
+        ASSERT(destinationType == GL_UNSIGNED_INT);
+        memcpy(output, input, count * sizeof(GLuint));
+    }
+    else if (sourceType == GL_UNSIGNED_SHORT)
+    {
+        if (destinationType == GL_UNSIGNED_SHORT)
+        {
+            memcpy(output, input, count * sizeof(GLushort));
+        }
+        else if (destinationType == GL_UNSIGNED_INT)
+        {
+            const GLushort *in = static_cast<const GLushort*>(input);
+            GLuint *out = static_cast<GLuint*>(output);
+
+            for (GLsizei i = 0; i < count; i++)
+            {
+                out[i] = in[i];
+            }
+        }
+        else UNREACHABLE();
+    }
+    else UNREACHABLE();
+}
+
+IndexDataManager::IndexDataManager(Renderer *renderer)
+    : mRenderer(renderer),
+      mStreamingBufferShort(NULL),
+      mStreamingBufferInt(NULL)
+{
+}
+
+IndexDataManager::~IndexDataManager()
+{
+    SafeDelete(mStreamingBufferShort);
+    SafeDelete(mStreamingBufferInt);
+}
+
+gl::Error IndexDataManager::prepareIndexData(GLenum type, GLsizei count, gl::Buffer *buffer, const GLvoid *indices, TranslatedIndexData *translated)
+{
+    const gl::Type &typeInfo = gl::GetTypeInfo(type);
+
+    GLenum destinationIndexType = (type == GL_UNSIGNED_INT) ? GL_UNSIGNED_INT : GL_UNSIGNED_SHORT;
+
+    unsigned int offset = 0;
+    bool alignedOffset = false;
+
+    BufferD3D *storage = NULL;
+
+    if (buffer != NULL)
+    {
+        offset = static_cast<unsigned int>(reinterpret_cast<uintptr_t>(indices));
+
+        storage = BufferD3D::makeBufferD3D(buffer->getImplementation());
+
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:  alignedOffset = (offset % sizeof(GLubyte) == 0);  break;
+          case GL_UNSIGNED_SHORT: alignedOffset = (offset % sizeof(GLushort) == 0); break;
+          case GL_UNSIGNED_INT:   alignedOffset = (offset % sizeof(GLuint) == 0);   break;
+          default: UNREACHABLE(); alignedOffset = false;
+        }
+
+        ASSERT(typeInfo.bytes * static_cast<unsigned int>(count) + offset <= storage->getSize());
+
+        indices = static_cast<const GLubyte*>(storage->getData()) + offset;
+    }
+
+    StaticIndexBufferInterface *staticBuffer = storage ? storage->getStaticIndexBuffer() : NULL;
+    IndexBufferInterface *indexBuffer = NULL;
+    bool directStorage = alignedOffset && storage && storage->supportsDirectBinding() &&
+                         destinationIndexType == type;
+    unsigned int streamOffset = 0;
+
+    if (directStorage)
+    {
+        streamOffset = offset;
+
+        if (!buffer->getIndexRangeCache()->findRange(type, offset, count, NULL, NULL))
+        {
+            buffer->getIndexRangeCache()->addRange(type, offset, count, translated->indexRange, offset);
+        }
+    }
+    else if (staticBuffer && staticBuffer->getBufferSize() != 0 && staticBuffer->getIndexType() == type && alignedOffset)
+    {
+        indexBuffer = staticBuffer;
+
+        if (!staticBuffer->getIndexRangeCache()->findRange(type, offset, count, NULL, &streamOffset))
+        {
+            streamOffset = (offset / typeInfo.bytes) * gl::GetTypeInfo(destinationIndexType).bytes;
+            staticBuffer->getIndexRangeCache()->addRange(type, offset, count, translated->indexRange, streamOffset);
+        }
+    }
+
+    // Avoid D3D11's primitive restart index value
+    // see http://msdn.microsoft.com/en-us/library/windows/desktop/bb205124(v=vs.85).aspx
+    if (translated->indexRange.end == 0xFFFF && type == GL_UNSIGNED_SHORT && mRenderer->getMajorShaderModel() > 3)
+    {
+        destinationIndexType = GL_UNSIGNED_INT;
+        directStorage = false;
+        indexBuffer = NULL;
+    }
+
+    const gl::Type &destTypeInfo = gl::GetTypeInfo(destinationIndexType);
+
+    if (!directStorage && !indexBuffer)
+    {
+        gl::Error error = getStreamingIndexBuffer(destinationIndexType, &indexBuffer);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        unsigned int convertCount = count;
+
+        if (staticBuffer)
+        {
+            if (staticBuffer->getBufferSize() == 0 && alignedOffset)
+            {
+                indexBuffer = staticBuffer;
+                convertCount = storage->getSize() / typeInfo.bytes;
+            }
+            else
+            {
+                storage->invalidateStaticData();
+                staticBuffer = NULL;
+            }
+        }
+
+        ASSERT(indexBuffer);
+
+        if (convertCount > std::numeric_limits<unsigned int>::max() / destTypeInfo.bytes)
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Reserving %u indices of %u bytes each exceeds the maximum buffer size.",
+                             convertCount, destTypeInfo.bytes);
+        }
+
+        unsigned int bufferSizeRequired = convertCount * destTypeInfo.bytes;
+        error = indexBuffer->reserveBufferSpace(bufferSizeRequired, type);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        void* output = NULL;
+        error = indexBuffer->mapBuffer(bufferSizeRequired, &output, &streamOffset);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        ConvertIndices(type, destinationIndexType, staticBuffer ? storage->getData() : indices, convertCount, output);
+
+        error = indexBuffer->unmapBuffer();
+        if (error.isError())
+        {
+            return error;
+        }
+
+        if (staticBuffer)
+        {
+            streamOffset = (offset / typeInfo.bytes) * destTypeInfo.bytes;
+            staticBuffer->getIndexRangeCache()->addRange(type, offset, count, translated->indexRange, streamOffset);
+        }
+    }
+
+    translated->storage = directStorage ? storage : NULL;
+    translated->indexBuffer = indexBuffer ? indexBuffer->getIndexBuffer() : NULL;
+    translated->serial = directStorage ? storage->getSerial() : indexBuffer->getSerial();
+    translated->startIndex = streamOffset / destTypeInfo.bytes;
+    translated->startOffset = streamOffset;
+    translated->indexType = destinationIndexType;
+
+    if (storage)
+    {
+        storage->promoteStaticUsage(count * typeInfo.bytes);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error IndexDataManager::getStreamingIndexBuffer(GLenum destinationIndexType, IndexBufferInterface **outBuffer)
+{
+    ASSERT(outBuffer);
+    if (destinationIndexType == GL_UNSIGNED_INT)
+    {
+        if (!mStreamingBufferInt)
+        {
+            mStreamingBufferInt = new StreamingIndexBufferInterface(mRenderer);
+            gl::Error error = mStreamingBufferInt->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT);
+            if (error.isError())
+            {
+                SafeDelete(mStreamingBufferInt);
+                return error;
+            }
+        }
+
+        *outBuffer = mStreamingBufferInt;
+        return gl::Error(GL_NO_ERROR);
+    }
+    else
+    {
+        ASSERT(destinationIndexType == GL_UNSIGNED_SHORT);
+
+        if (!mStreamingBufferShort)
+        {
+            mStreamingBufferShort = new StreamingIndexBufferInterface(mRenderer);
+            gl::Error error = mStreamingBufferShort->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_SHORT);
+            if (error.isError())
+            {
+                SafeDelete(mStreamingBufferShort);
+                return error;
+            }
+        }
+
+        *outBuffer = mStreamingBufferShort;
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexDataManager.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexDataManager.h
index 0e77c81d1b..6d0b89e6d4 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexDataManager.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/IndexDataManager.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,6 +11,10 @@
 #define LIBGLESV2_INDEXDATAMANAGER_H_
 
 #include "common/angleutils.h"
+#include "common/mathutil.h"
+#include "libGLESv2/Error.h"
+
+#include <GLES2/gl2.h>
 
 namespace
 {
@@ -24,21 +28,22 @@ class Buffer;
 
 namespace rx
 {
+class IndexBufferInterface;
 class StaticIndexBufferInterface;
 class StreamingIndexBufferInterface;
 class IndexBuffer;
-class BufferStorage;
+class BufferD3D;
 class Renderer;
 
 struct TranslatedIndexData
 {
-    unsigned int minIndex;
-    unsigned int maxIndex;
+    RangeUI indexRange;
     unsigned int startIndex;
     unsigned int startOffset;   // In bytes
 
     IndexBuffer *indexBuffer;
-    BufferStorage *storage;
+    BufferD3D *storage;
+    GLenum indexType;
     unsigned int serial;
 };
 
@@ -48,17 +53,17 @@ class IndexDataManager
     explicit IndexDataManager(Renderer *renderer);
     virtual ~IndexDataManager();
 
-    GLenum prepareIndexData(GLenum type, GLsizei count, gl::Buffer *arrayElementBuffer, const GLvoid *indices, TranslatedIndexData *translated);
-    StaticIndexBufferInterface *getCountingIndices(GLsizei count);
+    gl::Error prepareIndexData(GLenum type, GLsizei count, gl::Buffer *arrayElementBuffer, const GLvoid *indices, TranslatedIndexData *translated);
 
   private:
+     gl::Error getStreamingIndexBuffer(GLenum destinationIndexType, IndexBufferInterface **outBuffer);
+
     DISALLOW_COPY_AND_ASSIGN(IndexDataManager);
 
     Renderer *const mRenderer;
 
     StreamingIndexBufferInterface *mStreamingBufferShort;
     StreamingIndexBufferInterface *mStreamingBufferInt;
-    StaticIndexBufferInterface *mCountingBuffer;
 };
 
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/MemoryBuffer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/MemoryBuffer.cpp
new file mode 100644
index 0000000000..2b5b09a324
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/MemoryBuffer.cpp
@@ -0,0 +1,74 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "libGLESv2/renderer/d3d/MemoryBuffer.h"
+#include "common/debug.h"
+
+#include <algorithm>
+#include <cstdlib>
+
+namespace rx
+{
+
+MemoryBuffer::MemoryBuffer()
+    : mSize(0),
+      mData(NULL)
+{
+}
+
+MemoryBuffer::~MemoryBuffer()
+{
+    free(mData);
+    mData = NULL;
+}
+
+bool MemoryBuffer::resize(size_t size)
+{
+    if (size == 0)
+    {
+        free(mData);
+        mData = NULL;
+        mSize = 0;
+    }
+    else
+    {
+        uint8_t *newMemory = reinterpret_cast<uint8_t*>(malloc(sizeof(uint8_t) * size));
+        if (newMemory == NULL)
+        {
+            return false;
+        }
+
+        if (mData)
+        {
+            // Copy the intersection of the old data and the new data
+            std::copy(mData, mData + std::min(mSize, size), newMemory);
+            free(mData);
+        }
+
+        mData = newMemory;
+        mSize = size;
+    }
+
+    return true;
+}
+
+size_t MemoryBuffer::size() const
+{
+    return mSize;
+}
+
+const uint8_t *MemoryBuffer::data() const
+{
+    return mData;
+}
+
+uint8_t *MemoryBuffer::data()
+{
+    ASSERT(mData);
+    return mData;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/MemoryBuffer.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/MemoryBuffer.h
new file mode 100644
index 0000000000..c65f79fe10
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/MemoryBuffer.h
@@ -0,0 +1,36 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#ifndef LIBGLESV2_RENDERER_D3D_MEMORYBUFFER_H_
+#define LIBGLESV2_RENDERER_D3D_MEMORYBUFFER_H_
+
+#include <cstddef>
+#include <cstdint>
+
+namespace rx
+{
+
+class MemoryBuffer
+{
+  public:
+    MemoryBuffer();
+    ~MemoryBuffer();
+
+    bool resize(size_t size);
+    size_t size() const;
+    bool empty() const { return mSize == 0; }
+
+    const uint8_t *data() const;
+    uint8_t *data();
+
+  private:
+    size_t mSize;
+    uint8_t *mData;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_D3D_MEMORYBUFFER_H
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ProgramD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ProgramD3D.cpp
new file mode 100644
index 0000000000..d7d97cc2bd
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ProgramD3D.cpp
@@ -0,0 +1,205 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ProgramD3D.cpp: Defines the rx::ProgramD3D class which implements rx::ProgramImpl.
+
+#include "libGLESv2/renderer/d3d/ProgramD3D.h"
+
+#include "common/utilities.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/ShaderExecutable.h"
+#include "libGLESv2/renderer/d3d/DynamicHLSL.h"
+#include "libGLESv2/renderer/d3d/ShaderD3D.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+ProgramD3D::ProgramD3D(rx::Renderer *renderer)
+    : ProgramImpl(),
+      mRenderer(renderer),
+      mDynamicHLSL(NULL),
+      mVertexWorkarounds(rx::ANGLE_D3D_WORKAROUND_NONE),
+      mPixelWorkarounds(rx::ANGLE_D3D_WORKAROUND_NONE),
+      mVertexUniformStorage(NULL),
+      mFragmentUniformStorage(NULL)
+{
+    mDynamicHLSL = new rx::DynamicHLSL(renderer);
+}
+
+ProgramD3D::~ProgramD3D()
+{
+    reset();
+    SafeDelete(mDynamicHLSL);
+}
+
+ProgramD3D *ProgramD3D::makeProgramD3D(ProgramImpl *impl)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(ProgramD3D*, impl));
+    return static_cast<ProgramD3D*>(impl);
+}
+
+const ProgramD3D *ProgramD3D::makeProgramD3D(const ProgramImpl *impl)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(const ProgramD3D*, impl));
+    return static_cast<const ProgramD3D*>(impl);
+}
+
+bool ProgramD3D::load(gl::InfoLog &infoLog, gl::BinaryInputStream *stream)
+{
+    stream->readString(&mVertexHLSL);
+    stream->readInt(&mVertexWorkarounds);
+    stream->readString(&mPixelHLSL);
+    stream->readInt(&mPixelWorkarounds);
+    stream->readBool(&mUsesFragDepth);
+
+    const size_t pixelShaderKeySize = stream->readInt<unsigned int>();
+    mPixelShaderKey.resize(pixelShaderKeySize);
+    for (size_t pixelShaderKeyIndex = 0; pixelShaderKeyIndex < pixelShaderKeySize; pixelShaderKeyIndex++)
+    {
+        stream->readInt(&mPixelShaderKey[pixelShaderKeyIndex].type);
+        stream->readString(&mPixelShaderKey[pixelShaderKeyIndex].name);
+        stream->readString(&mPixelShaderKey[pixelShaderKeyIndex].source);
+        stream->readInt(&mPixelShaderKey[pixelShaderKeyIndex].outputIndex);
+    }
+
+    return true;
+}
+
+bool ProgramD3D::save(gl::BinaryOutputStream *stream)
+{
+    stream->writeString(mVertexHLSL);
+    stream->writeInt(mVertexWorkarounds);
+    stream->writeString(mPixelHLSL);
+    stream->writeInt(mPixelWorkarounds);
+    stream->writeInt(mUsesFragDepth);
+
+    const std::vector<rx::PixelShaderOutputVariable> &pixelShaderKey = mPixelShaderKey;
+    stream->writeInt(pixelShaderKey.size());
+    for (size_t pixelShaderKeyIndex = 0; pixelShaderKeyIndex < pixelShaderKey.size(); pixelShaderKeyIndex++)
+    {
+        const rx::PixelShaderOutputVariable &variable = pixelShaderKey[pixelShaderKeyIndex];
+        stream->writeInt(variable.type);
+        stream->writeString(variable.name);
+        stream->writeString(variable.source);
+        stream->writeInt(variable.outputIndex);
+    }
+
+    return true;
+}
+
+rx::ShaderExecutable *ProgramD3D::getPixelExecutableForOutputLayout(gl::InfoLog &infoLog, const std::vector<GLenum> &outputSignature,
+                                                                    const std::vector<gl::LinkedVarying> &transformFeedbackLinkedVaryings,
+                                                                    bool separatedOutputBuffers)
+{
+    std::string finalPixelHLSL = mDynamicHLSL->generatePixelShaderForOutputSignature(mPixelHLSL, mPixelShaderKey, mUsesFragDepth,
+                                                                                     outputSignature);
+
+    // Generate new pixel executable
+    rx::ShaderExecutable *pixelExecutable = mRenderer->compileToExecutable(infoLog, finalPixelHLSL.c_str(), rx::SHADER_PIXEL,
+                                                                           transformFeedbackLinkedVaryings, separatedOutputBuffers,
+                                                                           mPixelWorkarounds);
+
+    return pixelExecutable;
+}
+
+rx::ShaderExecutable *ProgramD3D::getVertexExecutableForInputLayout(gl::InfoLog &infoLog,
+                                                                    const gl::VertexFormat inputLayout[gl::MAX_VERTEX_ATTRIBS],
+                                                                    const sh::Attribute shaderAttributes[],
+                                                                    const std::vector<gl::LinkedVarying> &transformFeedbackLinkedVaryings,
+                                                                    bool separatedOutputBuffers)
+{
+    // Generate new dynamic layout with attribute conversions
+    std::string finalVertexHLSL = mDynamicHLSL->generateVertexShaderForInputLayout(mVertexHLSL, inputLayout, shaderAttributes);
+
+    // Generate new vertex executable
+    rx::ShaderExecutable *vertexExecutable = mRenderer->compileToExecutable(infoLog, finalVertexHLSL.c_str(),
+                                                                            rx::SHADER_VERTEX,
+                                                                            transformFeedbackLinkedVaryings, separatedOutputBuffers,
+                                                                            mVertexWorkarounds);
+
+    return vertexExecutable;
+}
+
+bool ProgramD3D::link(gl::InfoLog &infoLog, gl::Shader *fragmentShader, gl::Shader *vertexShader,
+                      const std::vector<std::string> &transformFeedbackVaryings, int *registers,
+                      std::vector<gl::LinkedVarying> *linkedVaryings, std::map<int, gl::VariableLocation> *outputVariables)
+{
+    rx::ShaderD3D *vertexShaderD3D = rx::ShaderD3D::makeShaderD3D(vertexShader->getImplementation());
+    rx::ShaderD3D *fragmentShaderD3D = rx::ShaderD3D::makeShaderD3D(fragmentShader->getImplementation());
+
+    mPixelHLSL = fragmentShaderD3D->getTranslatedSource();
+    mPixelWorkarounds = fragmentShaderD3D->getD3DWorkarounds();
+
+    mVertexHLSL = vertexShaderD3D->getTranslatedSource();
+    mVertexWorkarounds = vertexShaderD3D->getD3DWorkarounds();
+
+    // Map the varyings to the register file
+    rx::VaryingPacking packing = { NULL };
+    *registers = mDynamicHLSL->packVaryings(infoLog, packing, fragmentShaderD3D, vertexShaderD3D, transformFeedbackVaryings);
+
+    if (*registers < 0)
+    {
+        return false;
+    }
+
+    if (!gl::ProgramBinary::linkVaryings(infoLog, fragmentShader, vertexShader))
+    {
+        return false;
+    }
+
+    if (!mDynamicHLSL->generateShaderLinkHLSL(infoLog, *registers, packing, mPixelHLSL, mVertexHLSL,
+                                              fragmentShaderD3D, vertexShaderD3D, transformFeedbackVaryings,
+                                              linkedVaryings, outputVariables, &mPixelShaderKey, &mUsesFragDepth))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+void ProgramD3D::initializeUniformStorage(const std::vector<gl::LinkedUniform*> &uniforms)
+{
+    // Compute total default block size
+    unsigned int vertexRegisters = 0;
+    unsigned int fragmentRegisters = 0;
+    for (size_t uniformIndex = 0; uniformIndex < uniforms.size(); uniformIndex++)
+    {
+        const gl::LinkedUniform &uniform = *uniforms[uniformIndex];
+
+        if (!gl::IsSampler(uniform.type))
+        {
+            if (uniform.isReferencedByVertexShader())
+            {
+                vertexRegisters = std::max(vertexRegisters, uniform.vsRegisterIndex + uniform.registerCount);
+            }
+            if (uniform.isReferencedByFragmentShader())
+            {
+                fragmentRegisters = std::max(fragmentRegisters, uniform.psRegisterIndex + uniform.registerCount);
+            }
+        }
+    }
+
+    mVertexUniformStorage = mRenderer->createUniformStorage(vertexRegisters * 16u);
+    mFragmentUniformStorage = mRenderer->createUniformStorage(fragmentRegisters * 16u);
+}
+
+void ProgramD3D::reset()
+{
+    mVertexHLSL.clear();
+    mVertexWorkarounds = rx::ANGLE_D3D_WORKAROUND_NONE;
+
+    mPixelHLSL.clear();
+    mPixelWorkarounds = rx::ANGLE_D3D_WORKAROUND_NONE;
+    mUsesFragDepth = false;
+    mPixelShaderKey.clear();
+
+    SafeDelete(mVertexUniformStorage);
+    SafeDelete(mFragmentUniformStorage);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ProgramD3D.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ProgramD3D.h
new file mode 100644
index 0000000000..d645c57daa
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ProgramD3D.h
@@ -0,0 +1,87 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ProgramD3D.h: Defines the rx::ProgramD3D class which implements rx::ProgramImpl.
+
+#ifndef LIBGLESV2_RENDERER_PROGRAMD3D_H_
+#define LIBGLESV2_RENDERER_PROGRAMD3D_H_
+
+#include "libGLESv2/renderer/ProgramImpl.h"
+
+#include <string>
+#include <vector>
+
+namespace gl
+{
+struct LinkedUniform;
+struct VariableLocation;
+struct VertexFormat;
+}
+
+namespace rx
+{
+
+class UniformStorage;
+
+class ProgramD3D : public ProgramImpl
+{
+  public:
+    ProgramD3D(rx::Renderer *renderer);
+    virtual ~ProgramD3D();
+
+    static ProgramD3D *makeProgramD3D(ProgramImpl *impl);
+    static const ProgramD3D *makeProgramD3D(const ProgramImpl *impl);
+
+    Renderer *getRenderer() { return mRenderer; }
+    DynamicHLSL *getDynamicHLSL() { return mDynamicHLSL; }
+    const std::vector<rx::PixelShaderOutputVariable> &getPixelShaderKey() { return mPixelShaderKey; }
+
+    GLenum getBinaryFormat() { return GL_PROGRAM_BINARY_ANGLE; }
+    bool load(gl::InfoLog &infoLog, gl::BinaryInputStream *stream);
+    bool save(gl::BinaryOutputStream *stream);
+
+    ShaderExecutable *getPixelExecutableForOutputLayout(gl::InfoLog &infoLog, const std::vector<GLenum> &outputSignature,
+                                                        const std::vector<gl::LinkedVarying> &transformFeedbackLinkedVaryings,
+                                                        bool separatedOutputBuffers);
+    ShaderExecutable *getVertexExecutableForInputLayout(gl::InfoLog &infoLog,
+                                                        const gl::VertexFormat inputLayout[gl::MAX_VERTEX_ATTRIBS],
+                                                        const sh::Attribute shaderAttributes[],
+                                                        const std::vector<gl::LinkedVarying> &transformFeedbackLinkedVaryings,
+                                                        bool separatedOutputBuffers);
+
+    bool link(gl::InfoLog &infoLog, gl::Shader *fragmentShader, gl::Shader *vertexShader,
+              const std::vector<std::string> &transformFeedbackVaryings, int *registers,
+              std::vector<gl::LinkedVarying> *linkedVaryings, std::map<int, gl::VariableLocation> *outputVariables);
+
+    // D3D only
+    void initializeUniformStorage(const std::vector<gl::LinkedUniform*> &uniforms);
+
+    const UniformStorage &getVertexUniformStorage() const { return *mVertexUniformStorage; }
+    const UniformStorage &getFragmentUniformStorage() const { return *mFragmentUniformStorage; }
+
+    void reset();
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(ProgramD3D);
+
+    Renderer *mRenderer;
+    DynamicHLSL *mDynamicHLSL;
+
+    std::string mVertexHLSL;
+    rx::D3DWorkaroundType mVertexWorkarounds;
+
+    std::string mPixelHLSL;
+    rx::D3DWorkaroundType mPixelWorkarounds;
+    bool mUsesFragDepth;
+    std::vector<rx::PixelShaderOutputVariable> mPixelShaderKey;
+
+    UniformStorage *mVertexUniformStorage;
+    UniformStorage *mFragmentUniformStorage;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_PROGRAMD3D_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ShaderD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ShaderD3D.cpp
new file mode 100644
index 0000000000..c472113eba
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ShaderD3D.cpp
@@ -0,0 +1,457 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ShaderD3D.cpp: Defines the rx::ShaderD3D class which implements rx::ShaderImpl.
+
+#include "libGLESv2/renderer/d3d/ShaderD3D.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/Shader.h"
+#include "libGLESv2/main.h"
+
+#include "common/utilities.h"
+
+namespace rx
+{
+
+template <typename VarT>
+void FilterInactiveVariables(std::vector<VarT> *variableList)
+{
+    ASSERT(variableList);
+
+    for (size_t varIndex = 0; varIndex < variableList->size();)
+    {
+        if (!(*variableList)[varIndex].staticUse)
+        {
+            variableList->erase(variableList->begin() + varIndex);
+        }
+        else
+        {
+            varIndex++;
+        }
+    }
+}
+
+void *ShaderD3D::mFragmentCompiler = NULL;
+void *ShaderD3D::mVertexCompiler = NULL;
+
+template <typename VarT>
+const std::vector<VarT> *GetShaderVariables(const std::vector<VarT> *variableList)
+{
+    ASSERT(variableList);
+    return variableList;
+}
+
+ShaderD3D::ShaderD3D(GLenum type, rx::Renderer *renderer)
+    : mType(type),
+      mRenderer(renderer),
+      mShaderVersion(100)
+{
+    uncompile();
+    initializeCompiler();
+}
+
+ShaderD3D::~ShaderD3D()
+{
+}
+
+ShaderD3D *ShaderD3D::makeShaderD3D(ShaderImpl *impl)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(ShaderD3D*, impl));
+    return static_cast<ShaderD3D*>(impl);
+}
+
+const ShaderD3D *ShaderD3D::makeShaderD3D(const ShaderImpl *impl)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(const ShaderD3D*, impl));
+    return static_cast<const ShaderD3D*>(impl);
+}
+
+// Perform a one-time initialization of the shader compiler (or after being destructed by releaseCompiler)
+void ShaderD3D::initializeCompiler()
+{
+    if (!mFragmentCompiler)
+    {
+        int result = ShInitialize();
+
+        if (result)
+        {
+            ShShaderOutput hlslVersion = (mRenderer->getMajorShaderModel() >= 4) ? SH_HLSL11_OUTPUT : SH_HLSL9_OUTPUT;
+
+            ShBuiltInResources resources;
+            ShInitBuiltInResources(&resources);
+
+            // TODO(geofflang): use context's caps
+            const gl::Caps &caps = mRenderer->getRendererCaps();
+            const gl::Extensions &extensions = mRenderer->getRendererExtensions();
+
+            resources.MaxVertexAttribs = caps.maxVertexAttributes;
+            resources.MaxVertexUniformVectors = caps.maxVertexUniformVectors;
+            resources.MaxVaryingVectors = caps.maxVaryingVectors;
+            resources.MaxVertexTextureImageUnits = caps.maxVertexTextureImageUnits;
+            resources.MaxCombinedTextureImageUnits = caps.maxCombinedTextureImageUnits;
+            resources.MaxTextureImageUnits = caps.maxTextureImageUnits;
+            resources.MaxFragmentUniformVectors = caps.maxFragmentUniformVectors;
+            resources.MaxDrawBuffers = caps.maxDrawBuffers;
+            resources.OES_standard_derivatives = extensions.standardDerivatives;
+            resources.EXT_draw_buffers = extensions.drawBuffers;
+            resources.EXT_shader_texture_lod = 1;
+            // resources.OES_EGL_image_external = mRenderer->getShareHandleSupport() ? 1 : 0; // TODO: commented out until the extension is actually supported.
+            resources.FragmentPrecisionHigh = 1;   // Shader Model 2+ always supports FP24 (s16e7) which corresponds to highp
+            resources.EXT_frag_depth = 1; // Shader Model 2+ always supports explicit depth output
+            // GLSL ES 3.0 constants
+            resources.MaxVertexOutputVectors = caps.maxVertexOutputComponents / 4;
+            resources.MaxFragmentInputVectors = caps.maxFragmentInputComponents / 4;
+            resources.MinProgramTexelOffset = caps.minProgramTexelOffset;
+            resources.MaxProgramTexelOffset = caps.maxProgramTexelOffset;
+
+            mFragmentCompiler = ShConstructCompiler(GL_FRAGMENT_SHADER, SH_GLES2_SPEC, hlslVersion, &resources);
+            mVertexCompiler = ShConstructCompiler(GL_VERTEX_SHADER, SH_GLES2_SPEC, hlslVersion, &resources);
+        }
+    }
+}
+
+void ShaderD3D::releaseCompiler()
+{
+    ShDestruct(mFragmentCompiler);
+    ShDestruct(mVertexCompiler);
+
+    mFragmentCompiler = NULL;
+    mVertexCompiler = NULL;
+
+    ShFinalize();
+}
+
+void ShaderD3D::parseVaryings(void *compiler)
+{
+     if (!mHlsl.empty())
+    {
+        const std::vector<sh::Varying> *varyings = ShGetVaryings(compiler);
+        ASSERT(varyings);
+
+        for (size_t varyingIndex = 0; varyingIndex < varyings->size(); varyingIndex++)
+        {
+            mVaryings.push_back(gl::PackedVarying((*varyings)[varyingIndex]));
+        }
+
+        mUsesMultipleRenderTargets = mHlsl.find("GL_USES_MRT")          != std::string::npos;
+        mUsesFragColor             = mHlsl.find("GL_USES_FRAG_COLOR")   != std::string::npos;
+        mUsesFragData              = mHlsl.find("GL_USES_FRAG_DATA")    != std::string::npos;
+        mUsesFragCoord             = mHlsl.find("GL_USES_FRAG_COORD")   != std::string::npos;
+        mUsesFrontFacing           = mHlsl.find("GL_USES_FRONT_FACING") != std::string::npos;
+        mUsesPointSize             = mHlsl.find("GL_USES_POINT_SIZE")   != std::string::npos;
+        mUsesPointCoord            = mHlsl.find("GL_USES_POINT_COORD")  != std::string::npos;
+        mUsesDepthRange            = mHlsl.find("GL_USES_DEPTH_RANGE")  != std::string::npos;
+        mUsesFragDepth             = mHlsl.find("GL_USES_FRAG_DEPTH")   != std::string::npos;
+        mUsesDiscardRewriting      = mHlsl.find("ANGLE_USES_DISCARD_REWRITING") != std::string::npos;
+        mUsesNestedBreak           = mHlsl.find("ANGLE_USES_NESTED_BREAK") != std::string::npos;
+    }
+}
+
+void ShaderD3D::resetVaryingsRegisterAssignment()
+{
+    for (size_t varyingIndex = 0; varyingIndex < mVaryings.size(); varyingIndex++)
+    {
+        mVaryings[varyingIndex].resetRegisterAssignment();
+    }
+}
+
+// initialize/clean up previous state
+void ShaderD3D::uncompile()
+{
+    // set by compileToHLSL
+    mHlsl.clear();
+    mInfoLog.clear();
+
+    mUsesMultipleRenderTargets = false;
+    mUsesFragColor = false;
+    mUsesFragData = false;
+    mUsesFragCoord = false;
+    mUsesFrontFacing = false;
+    mUsesPointSize = false;
+    mUsesPointCoord = false;
+    mUsesDepthRange = false;
+    mUsesFragDepth = false;
+    mShaderVersion = 100;
+    mUsesDiscardRewriting = false;
+    mUsesNestedBreak = false;
+
+    mVaryings.clear();
+    mUniforms.clear();
+    mInterfaceBlocks.clear();
+    mActiveAttributes.clear();
+    mActiveOutputVariables.clear();
+}
+
+void ShaderD3D::compileToHLSL(void *compiler, const std::string &source)
+{
+    // ensure the compiler is loaded
+    initializeCompiler();
+
+    int compileOptions = (SH_OBJECT_CODE | SH_VARIABLES);
+    std::string sourcePath;
+    if (gl::perfActive())
+    {
+        sourcePath = getTempPath();
+        writeFile(sourcePath.c_str(), source.c_str(), source.length());
+        compileOptions |= SH_LINE_DIRECTIVES;
+    }
+
+    int result;
+    if (sourcePath.empty())
+    {
+        const char* sourceStrings[] =
+        {
+            source.c_str(),
+        };
+
+        result = ShCompile(compiler, sourceStrings, ArraySize(sourceStrings), compileOptions);
+    }
+    else
+    {
+        const char* sourceStrings[] =
+        {
+            sourcePath.c_str(),
+            source.c_str(),
+        };
+
+        result = ShCompile(compiler, sourceStrings, ArraySize(sourceStrings), compileOptions | SH_SOURCE_PATH);
+    }
+
+    size_t shaderVersion = 100;
+    ShGetInfo(compiler, SH_SHADER_VERSION, &shaderVersion);
+
+    mShaderVersion = static_cast<int>(shaderVersion);
+
+    if (shaderVersion == 300 && mRenderer->getCurrentClientVersion() < 3)
+    {
+        mInfoLog = "GLSL ES 3.00 is not supported by OpenGL ES 2.0 contexts";
+        TRACE("\n%s", mInfoLog.c_str());
+    }
+    else if (result)
+    {
+        size_t objCodeLen = 0;
+        ShGetInfo(compiler, SH_OBJECT_CODE_LENGTH, &objCodeLen);
+
+        char* outputHLSL = new char[objCodeLen];
+        ShGetObjectCode(compiler, outputHLSL);
+
+#ifdef _DEBUG
+        std::ostringstream hlslStream;
+        hlslStream << "// GLSL\n";
+        hlslStream << "//\n";
+
+        size_t curPos = 0;
+        while (curPos != std::string::npos)
+        {
+            size_t nextLine = source.find("\n", curPos);
+            size_t len = (nextLine == std::string::npos) ? std::string::npos : (nextLine - curPos + 1);
+
+            hlslStream << "// " << source.substr(curPos, len);
+
+            curPos = (nextLine == std::string::npos) ? std::string::npos : (nextLine + 1);
+        }
+        hlslStream << "\n\n";
+        hlslStream << outputHLSL;
+        mHlsl = hlslStream.str();
+#else
+        mHlsl = outputHLSL;
+#endif
+
+        SafeDeleteArray(outputHLSL);
+
+        mUniforms = *GetShaderVariables(ShGetUniforms(compiler));
+
+        for (size_t uniformIndex = 0; uniformIndex < mUniforms.size(); uniformIndex++)
+        {
+            const sh::Uniform &uniform = mUniforms[uniformIndex];
+
+            if (uniform.staticUse)
+            {
+                unsigned int index = -1;
+                bool result = ShGetUniformRegister(compiler, uniform.name.c_str(), &index);
+                UNUSED_ASSERTION_VARIABLE(result);
+                ASSERT(result);
+
+                mUniformRegisterMap[uniform.name] = index;
+            }
+        }
+
+        mInterfaceBlocks = *GetShaderVariables(ShGetInterfaceBlocks(compiler));
+
+        for (size_t blockIndex = 0; blockIndex < mInterfaceBlocks.size(); blockIndex++)
+        {
+            const sh::InterfaceBlock &interfaceBlock = mInterfaceBlocks[blockIndex];
+
+            if (interfaceBlock.staticUse)
+            {
+                unsigned int index = -1;
+                bool result = ShGetInterfaceBlockRegister(compiler, interfaceBlock.name.c_str(), &index);
+                UNUSED_ASSERTION_VARIABLE(result);
+                ASSERT(result);
+
+                mInterfaceBlockRegisterMap[interfaceBlock.name] = index;
+            }
+        }
+    }
+    else
+    {
+        size_t infoLogLen = 0;
+        ShGetInfo(compiler, SH_INFO_LOG_LENGTH, &infoLogLen);
+
+        char* infoLog = new char[infoLogLen];
+        ShGetInfoLog(compiler, infoLog);
+        mInfoLog = infoLog;
+
+        TRACE("\n%s", mInfoLog.c_str());
+    }
+}
+
+rx::D3DWorkaroundType ShaderD3D::getD3DWorkarounds() const
+{
+    if (mUsesDiscardRewriting)
+    {
+        // ANGLE issue 486:
+        // Work-around a D3D9 compiler bug that presents itself when using conditional discard, by disabling optimization
+        return rx::ANGLE_D3D_WORKAROUND_SKIP_OPTIMIZATION;
+    }
+
+    if (mUsesNestedBreak)
+    {
+        // ANGLE issue 603:
+        // Work-around a D3D9 compiler bug that presents itself when using break in a nested loop, by maximizing optimization
+        // We want to keep the use of ANGLE_D3D_WORKAROUND_MAX_OPTIMIZATION minimal to prevent hangs, so usesDiscard takes precedence
+        return rx::ANGLE_D3D_WORKAROUND_MAX_OPTIMIZATION;
+    }
+
+    return rx::ANGLE_D3D_WORKAROUND_NONE;
+}
+
+// true if varying x has a higher priority in packing than y
+bool ShaderD3D::compareVarying(const gl::PackedVarying &x, const gl::PackedVarying &y)
+{
+    if (x.type == y.type)
+    {
+        return x.arraySize > y.arraySize;
+    }
+
+    // Special case for handling structs: we sort these to the end of the list
+    if (x.type == GL_STRUCT_ANGLEX)
+    {
+        return false;
+    }
+
+    if (y.type == GL_STRUCT_ANGLEX)
+    {
+        return true;
+    }
+
+    return gl::VariableSortOrder(x.type) < gl::VariableSortOrder(y.type);
+}
+
+unsigned int ShaderD3D::getUniformRegister(const std::string &uniformName) const
+{
+    ASSERT(mUniformRegisterMap.count(uniformName) > 0);
+    return mUniformRegisterMap.find(uniformName)->second;
+}
+
+unsigned int ShaderD3D::getInterfaceBlockRegister(const std::string &blockName) const
+{
+    ASSERT(mInterfaceBlockRegisterMap.count(blockName) > 0);
+    return mInterfaceBlockRegisterMap.find(blockName)->second;
+}
+
+void *ShaderD3D::getCompiler()
+{
+    if (mType == GL_VERTEX_SHADER)
+    {
+        return mVertexCompiler;
+    }
+    else
+    {
+        ASSERT(mType == GL_FRAGMENT_SHADER);
+        return mFragmentCompiler;
+    }
+}
+
+ShShaderOutput ShaderD3D::getCompilerOutputType(GLenum shader)
+{
+    void *compiler = NULL;
+
+    switch (shader)
+    {
+      case GL_VERTEX_SHADER:   compiler = mVertexCompiler;   break;
+      case GL_FRAGMENT_SHADER: compiler = mFragmentCompiler; break;
+      default: UNREACHABLE();  return SH_HLSL9_OUTPUT;
+    }
+
+    size_t outputType = 0;
+    ShGetInfo(compiler, SH_OUTPUT_TYPE, &outputType);
+
+    return static_cast<ShShaderOutput>(outputType);
+}
+
+bool ShaderD3D::compile(const std::string &source)
+{
+    uncompile();
+
+    void *compiler = getCompiler();
+
+    compileToHLSL(compiler, source);
+
+    if (mType == GL_VERTEX_SHADER)
+    {
+        parseAttributes(compiler);
+    }
+
+    parseVaryings(compiler);
+
+    if (mType == GL_FRAGMENT_SHADER)
+    {
+        std::sort(mVaryings.begin(), mVaryings.end(), compareVarying);
+
+        const std::string &hlsl = getTranslatedSource();
+        if (!hlsl.empty())
+        {
+            mActiveOutputVariables = *GetShaderVariables(ShGetOutputVariables(compiler));
+            FilterInactiveVariables(&mActiveOutputVariables);
+        }
+    }
+
+    return !getTranslatedSource().empty();
+}
+
+void ShaderD3D::parseAttributes(void *compiler)
+{
+    const std::string &hlsl = getTranslatedSource();
+    if (!hlsl.empty())
+    {
+        mActiveAttributes = *GetShaderVariables(ShGetAttributes(compiler));
+        FilterInactiveVariables(&mActiveAttributes);
+    }
+}
+
+int ShaderD3D::getSemanticIndex(const std::string &attributeName) const
+{
+    if (!attributeName.empty())
+    {
+        int semanticIndex = 0;
+        for (size_t attributeIndex = 0; attributeIndex < mActiveAttributes.size(); attributeIndex++)
+        {
+            const sh::ShaderVariable &attribute = mActiveAttributes[attributeIndex];
+
+            if (attribute.name == attributeName)
+            {
+                return semanticIndex;
+            }
+
+            semanticIndex += gl::VariableRegisterCount(attribute.type);
+        }
+    }
+
+    return -1;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ShaderD3D.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ShaderD3D.h
new file mode 100644
index 0000000000..40e64cf36c
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/ShaderD3D.h
@@ -0,0 +1,94 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// ShaderD3D.h: Defines the rx::ShaderD3D class which implements rx::ShaderImpl.
+
+#ifndef LIBGLESV2_RENDERER_SHADERD3D_H_
+#define LIBGLESV2_RENDERER_SHADERD3D_H_
+
+#include "libGLESv2/renderer/ShaderImpl.h"
+#include "libGLESv2/Shader.h"
+
+#include <map>
+
+namespace rx
+{
+class DynamicHLSL;
+class Renderer;
+
+class ShaderD3D : public ShaderImpl
+{
+    friend class DynamicHLSL;
+
+  public:
+    ShaderD3D(GLenum type, rx::Renderer *renderer);
+    virtual ~ShaderD3D();
+
+    static ShaderD3D *makeShaderD3D(ShaderImpl *impl);
+    static const ShaderD3D *makeShaderD3D(const ShaderImpl *impl);
+
+    // ShaderImpl implementation
+    const std::string &getInfoLog() const { return mInfoLog; }
+    const std::string &getTranslatedSource() const { return mHlsl; }
+
+    // D3D-specific methods
+    virtual void uncompile();
+    void resetVaryingsRegisterAssignment();
+    unsigned int getUniformRegister(const std::string &uniformName) const;
+    unsigned int getInterfaceBlockRegister(const std::string &blockName) const;
+    int getSemanticIndex(const std::string &attributeName) const;
+
+    rx::D3DWorkaroundType getD3DWorkarounds() const;
+    int getShaderVersion() const { return mShaderVersion; }
+    bool usesDepthRange() const { return mUsesDepthRange; }
+    bool usesPointSize() const { return mUsesPointSize; }
+
+    static void releaseCompiler();
+    static ShShaderOutput getCompilerOutputType(GLenum shader);
+
+    virtual bool compile(const std::string &source);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(ShaderD3D);
+
+    void compileToHLSL(void *compiler, const std::string &source);
+    void parseVaryings(void *compiler);
+
+    void initializeCompiler();
+    void parseAttributes(void *compiler);
+    void *getCompiler();
+
+    static bool compareVarying(const gl::PackedVarying &x, const gl::PackedVarying &y);
+
+    static void *mFragmentCompiler;
+    static void *mVertexCompiler;
+
+    GLenum mType;
+    rx::Renderer *mRenderer;
+
+    int mShaderVersion;
+
+    bool mUsesMultipleRenderTargets;
+    bool mUsesFragColor;
+    bool mUsesFragData;
+    bool mUsesFragCoord;
+    bool mUsesFrontFacing;
+    bool mUsesPointSize;
+    bool mUsesPointCoord;
+    bool mUsesDepthRange;
+    bool mUsesFragDepth;
+    bool mUsesDiscardRewriting;
+    bool mUsesNestedBreak;
+
+    std::string mHlsl;
+    std::string mInfoLog;
+    std::map<std::string, unsigned int> mUniformRegisterMap;
+    std::map<std::string, unsigned int> mInterfaceBlockRegisterMap;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_SHADERD3D_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp
new file mode 100644
index 0000000000..96c84977cb
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp
@@ -0,0 +1,2260 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureD3D.cpp: Implementations of the Texture interfaces shared betweeen the D3D backends.
+
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
+#include "libGLESv2/renderer/d3d/TextureStorage.h"
+#include "libGLESv2/renderer/d3d/ImageD3D.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/renderer/BufferImpl.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+#include "libGLESv2/renderer/Renderer.h"
+
+#include "libEGL/Surface.h"
+
+#include "common/mathutil.h"
+#include "common/utilities.h"
+
+namespace rx
+{
+
+bool IsRenderTargetUsage(GLenum usage)
+{
+    return (usage == GL_FRAMEBUFFER_ATTACHMENT_ANGLE);
+}
+
+TextureD3D::TextureD3D(Renderer *renderer)
+    : mRenderer(renderer),
+      mUsage(GL_NONE),
+      mDirtyImages(true),
+      mImmutable(false)
+{
+}
+
+TextureD3D::~TextureD3D()
+{
+}
+
+TextureD3D *TextureD3D::makeTextureD3D(TextureImpl *texture)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(TextureD3D*, texture));
+    return static_cast<TextureD3D*>(texture);
+}
+
+TextureStorage *TextureD3D::getNativeTexture()
+{
+    // ensure the underlying texture is created
+    initializeStorage(false);
+
+    TextureStorage *storage = getBaseLevelStorage();
+    if (storage)
+    {
+        updateStorage();
+    }
+
+    return storage;
+}
+
+GLint TextureD3D::getBaseLevelWidth() const
+{
+    const Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getWidth() : 0);
+}
+
+GLint TextureD3D::getBaseLevelHeight() const
+{
+    const Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getHeight() : 0);
+}
+
+GLint TextureD3D::getBaseLevelDepth() const
+{
+    const Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getDepth() : 0);
+}
+
+// Note: "base level image" is loosely defined to be any image from the base level,
+// where in the base of 2D array textures and cube maps there are several. Don't use
+// the base level image for anything except querying texture format and size.
+GLenum TextureD3D::getBaseLevelInternalFormat() const
+{
+    const Image *baseImage = getBaseLevelImage();
+    return (baseImage ? baseImage->getInternalFormat() : GL_NONE);
+}
+
+void TextureD3D::setImage(const gl::PixelUnpackState &unpack, GLenum type, const void *pixels, Image *image)
+{
+    // No-op
+    if (image->getWidth() == 0 || image->getHeight() == 0 || image->getDepth() == 0)
+    {
+        return;
+    }
+
+    // We no longer need the "GLenum format" parameter to TexImage to determine what data format "pixels" contains.
+    // From our image internal format we know how many channels to expect, and "type" gives the format of pixel's components.
+    const void *pixelData = pixels;
+
+    if (unpack.pixelBuffer.id() != 0)
+    {
+        // Do a CPU readback here, if we have an unpack buffer bound and the fast GPU path is not supported
+        gl::Buffer *pixelBuffer = unpack.pixelBuffer.get();
+        ptrdiff_t offset = reinterpret_cast<ptrdiff_t>(pixels);
+        // TODO: setImage/subImage is the only place outside of renderer that asks for a buffers raw data.
+        // This functionality should be moved into renderer and the getData method of BufferImpl removed.
+        const void *bufferData = pixelBuffer->getImplementation()->getData();
+        pixelData = static_cast<const unsigned char *>(bufferData) + offset;
+    }
+
+    if (pixelData != NULL)
+    {
+        image->loadData(0, 0, 0, image->getWidth(), image->getHeight(), image->getDepth(), unpack.alignment, type, pixelData);
+        mDirtyImages = true;
+    }
+}
+
+bool TextureD3D::subImage(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                          GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels, const gl::ImageIndex &index)
+{
+    const void *pixelData = pixels;
+
+    // CPU readback & copy where direct GPU copy is not supported
+    if (unpack.pixelBuffer.id() != 0)
+    {
+        gl::Buffer *pixelBuffer = unpack.pixelBuffer.get();
+        ptrdiff_t offset = reinterpret_cast<ptrdiff_t>(pixels);
+        // TODO: setImage/subImage is the only place outside of renderer that asks for a buffers raw data.
+        // This functionality should be moved into renderer and the getData method of BufferImpl removed.
+        const void *bufferData = pixelBuffer->getImplementation()->getData();
+        pixelData = static_cast<const unsigned char *>(bufferData) + offset;
+    }
+
+    if (pixelData != NULL)
+    {
+        Image *image = getImage(index);
+        ASSERT(image);
+
+        image->loadData(xoffset, yoffset, zoffset, width, height, depth, unpack.alignment, type, pixelData);
+        mDirtyImages = true;
+    }
+
+    return true;
+}
+
+void TextureD3D::setCompressedImage(GLsizei imageSize, const void *pixels, Image *image)
+{
+    if (pixels != NULL)
+    {
+        image->loadCompressedData(0, 0, 0, image->getWidth(), image->getHeight(), image->getDepth(), pixels);
+        mDirtyImages = true;
+    }
+}
+
+bool TextureD3D::subImageCompressed(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                                 GLenum format, GLsizei imageSize, const void *pixels, Image *image)
+{
+    if (pixels != NULL)
+    {
+        image->loadCompressedData(xoffset, yoffset, zoffset, width, height, depth, pixels);
+        mDirtyImages = true;
+    }
+
+    return true;
+}
+
+bool TextureD3D::isFastUnpackable(const gl::PixelUnpackState &unpack, GLenum sizedInternalFormat)
+{
+    return unpack.pixelBuffer.id() != 0 && mRenderer->supportsFastCopyBufferToTexture(sizedInternalFormat);
+}
+
+bool TextureD3D::fastUnpackPixels(const gl::PixelUnpackState &unpack, const void *pixels, const gl::Box &destArea,
+                               GLenum sizedInternalFormat, GLenum type, RenderTarget *destRenderTarget)
+{
+    if (destArea.width <= 0 && destArea.height <= 0 && destArea.depth <= 0)
+    {
+        return true;
+    }
+
+    // In order to perform the fast copy through the shader, we must have the right format, and be able
+    // to create a render target.
+    ASSERT(mRenderer->supportsFastCopyBufferToTexture(sizedInternalFormat));
+
+    ptrdiff_t offset = reinterpret_cast<ptrdiff_t>(pixels);
+
+    return mRenderer->fastCopyBufferToTexture(unpack, offset, destRenderTarget, sizedInternalFormat, type, destArea);
+}
+
+GLint TextureD3D::creationLevels(GLsizei width, GLsizei height, GLsizei depth) const
+{
+    if ((gl::isPow2(width) && gl::isPow2(height) && gl::isPow2(depth)) || mRenderer->getRendererExtensions().textureNPOT)
+    {
+        // Maximum number of levels
+        return gl::log2(std::max(std::max(width, height), depth)) + 1;
+    }
+    else
+    {
+        // OpenGL ES 2.0 without GL_OES_texture_npot does not permit NPOT mipmaps.
+        return 1;
+    }
+}
+
+int TextureD3D::mipLevels() const
+{
+    return gl::log2(std::max(std::max(getBaseLevelWidth(), getBaseLevelHeight()), getBaseLevelDepth())) + 1;
+}
+
+
+TextureD3D_2D::TextureD3D_2D(Renderer *renderer)
+    : TextureD3D(renderer),
+      mTexStorage(NULL)
+{
+    for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++i)
+    {
+        mImageArray[i] = ImageD3D::makeImageD3D(renderer->createImage());
+    }
+}
+
+TextureD3D_2D::~TextureD3D_2D()
+{
+    // Delete the Images before the TextureStorage.
+    // Images might be relying on the TextureStorage for some of their data.
+    // If TextureStorage is deleted before the Images, then their data will be wastefully copied back from the GPU before we delete the Images.
+    for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++i)
+    {
+        delete mImageArray[i];
+    }
+
+    SafeDelete(mTexStorage);
+}
+
+Image *TextureD3D_2D::getImage(int level, int layer) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(layer == 0);
+    return mImageArray[level];
+}
+
+Image *TextureD3D_2D::getImage(const gl::ImageIndex &index) const
+{
+    ASSERT(index.mipIndex < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(!index.hasLayer());
+    ASSERT(index.type == GL_TEXTURE_2D);
+    return mImageArray[index.mipIndex];
+}
+
+GLsizei TextureD3D_2D::getLayerCount(int level) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    return 1;
+}
+
+GLsizei TextureD3D_2D::getWidth(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getWidth();
+    else
+        return 0;
+}
+
+GLsizei TextureD3D_2D::getHeight(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getHeight();
+    else
+        return 0;
+}
+
+GLenum TextureD3D_2D::getInternalFormat(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getInternalFormat();
+    else
+        return GL_NONE;
+}
+
+GLenum TextureD3D_2D::getActualFormat(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getActualFormat();
+    else
+        return GL_NONE;
+}
+
+bool TextureD3D_2D::isDepth(GLint level) const
+{
+    return gl::GetInternalFormatInfo(getInternalFormat(level)).depthBits > 0;
+}
+
+void TextureD3D_2D::setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D && depth == 1);
+
+    GLenum sizedInternalFormat = gl::GetSizedInternalFormat(internalFormat, type);
+
+    bool fastUnpacked = false;
+
+    redefineImage(level, sizedInternalFormat, width, height);
+
+    // Attempt a fast gpu copy of the pixel data to the surface
+    if (isFastUnpackable(unpack, sizedInternalFormat) && isLevelComplete(level))
+    {
+        gl::ImageIndex index = gl::ImageIndex::Make2D(level);
+
+        // Will try to create RT storage if it does not exist
+        RenderTarget *destRenderTarget = getRenderTarget(index);
+        gl::Box destArea(0, 0, 0, getWidth(level), getHeight(level), 1);
+
+        if (destRenderTarget && fastUnpackPixels(unpack, pixels, destArea, sizedInternalFormat, type, destRenderTarget))
+        {
+            // Ensure we don't overwrite our newly initialized data
+            mImageArray[level]->markClean();
+
+            fastUnpacked = true;
+        }
+    }
+
+    if (!fastUnpacked)
+    {
+        TextureD3D::setImage(unpack, type, pixels, mImageArray[level]);
+    }
+}
+
+void TextureD3D_2D::setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D && depth == 1);
+
+    // compressed formats don't have separate sized internal formats-- we can just use the compressed format directly
+    redefineImage(level, format, width, height);
+
+    TextureD3D::setCompressedImage(imageSize, pixels, mImageArray[level]);
+}
+
+void TextureD3D_2D::subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D && depth == 1 && zoffset == 0);
+
+    bool fastUnpacked = false;
+
+    gl::ImageIndex index = gl::ImageIndex::Make2D(level);
+    if (isFastUnpackable(unpack, getInternalFormat(level)) && isLevelComplete(level))
+    {
+        RenderTarget *renderTarget = getRenderTarget(index);
+        gl::Box destArea(xoffset, yoffset, 0, width, height, 1);
+
+        if (renderTarget && fastUnpackPixels(unpack, pixels, destArea, getInternalFormat(level), type, renderTarget))
+        {
+            // Ensure we don't overwrite our newly initialized data
+            mImageArray[level]->markClean();
+
+            fastUnpacked = true;
+        }
+    }
+
+    if (!fastUnpacked && TextureD3D::subImage(xoffset, yoffset, 0, width, height, 1, format, type, unpack, pixels, index))
+    {
+        commitRect(level, xoffset, yoffset, width, height);
+    }
+}
+
+void TextureD3D_2D::subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D && depth == 1 && zoffset == 0);
+
+    if (TextureD3D::subImageCompressed(xoffset, yoffset, 0, width, height, 1, format, imageSize, pixels, mImageArray[level]))
+    {
+        commitRect(level, xoffset, yoffset, width, height);
+    }
+}
+
+void TextureD3D_2D::copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    ASSERT(target == GL_TEXTURE_2D);
+
+    GLenum sizedInternalFormat = gl::GetSizedInternalFormat(format, GL_UNSIGNED_BYTE);
+    redefineImage(level, sizedInternalFormat, width, height);
+
+    if (!mImageArray[level]->isRenderableFormat())
+    {
+        mImageArray[level]->copy(0, 0, 0, x, y, width, height, source);
+        mDirtyImages = true;
+    }
+    else
+    {
+        ensureRenderTarget();
+        mImageArray[level]->markClean();
+
+        if (width != 0 && height != 0 && isValidLevel(level))
+        {
+            gl::Rectangle sourceRect;
+            sourceRect.x = x;
+            sourceRect.width = width;
+            sourceRect.y = y;
+            sourceRect.height = height;
+
+            mRenderer->copyImage2D(source, sourceRect, format, 0, 0, mTexStorage, level);
+        }
+    }
+}
+
+void TextureD3D_2D::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    ASSERT(target == GL_TEXTURE_2D && zoffset == 0);
+
+    // can only make our texture storage to a render target if level 0 is defined (with a width & height) and
+    // the current level we're copying to is defined (with appropriate format, width & height)
+    bool canCreateRenderTarget = isLevelComplete(level) && isLevelComplete(0);
+
+    if (!mImageArray[level]->isRenderableFormat() || (!mTexStorage && !canCreateRenderTarget))
+    {
+        mImageArray[level]->copy(xoffset, yoffset, 0, x, y, width, height, source);
+        mDirtyImages = true;
+    }
+    else
+    {
+        ensureRenderTarget();
+
+        if (isValidLevel(level))
+        {
+            updateStorageLevel(level);
+
+            gl::Rectangle sourceRect;
+            sourceRect.x = x;
+            sourceRect.width = width;
+            sourceRect.y = y;
+            sourceRect.height = height;
+
+            mRenderer->copyImage2D(source, sourceRect,
+                                   gl::GetInternalFormatInfo(getBaseLevelInternalFormat()).format,
+                                   xoffset, yoffset, mTexStorage, level);
+        }
+    }
+}
+
+void TextureD3D_2D::storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    ASSERT(target == GL_TEXTURE_2D && depth == 1);
+
+    for (int level = 0; level < levels; level++)
+    {
+        GLsizei levelWidth = std::max(1, width >> level);
+        GLsizei levelHeight = std::max(1, height >> level);
+        mImageArray[level]->redefine(mRenderer, GL_TEXTURE_2D, internalformat, levelWidth, levelHeight, 1, true);
+    }
+
+    for (int level = levels; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        mImageArray[level]->redefine(mRenderer, GL_TEXTURE_2D, GL_NONE, 0, 0, 0, true);
+    }
+
+    mImmutable = true;
+
+    bool renderTarget = IsRenderTargetUsage(mUsage);
+    TextureStorage *storage = mRenderer->createTextureStorage2D(internalformat, renderTarget, width, height, levels);
+    setCompleteTexStorage(storage);
+}
+
+void TextureD3D_2D::bindTexImage(egl::Surface *surface)
+{
+    GLenum internalformat = surface->getFormat();
+
+    mImageArray[0]->redefine(mRenderer, GL_TEXTURE_2D, internalformat, surface->getWidth(), surface->getHeight(), 1, true);
+
+    if (mTexStorage)
+    {
+        SafeDelete(mTexStorage);
+    }
+
+    mTexStorage = mRenderer->createTextureStorage2D(surface->getSwapChain());
+
+    mDirtyImages = true;
+}
+
+void TextureD3D_2D::releaseTexImage()
+{
+    if (mTexStorage)
+    {
+        SafeDelete(mTexStorage);
+    }
+
+    for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        mImageArray[i]->redefine(mRenderer, GL_TEXTURE_2D, GL_NONE, 0, 0, 0, true);
+    }
+}
+
+void TextureD3D_2D::generateMipmaps()
+{
+    // Purge array levels 1 through q and reset them to represent the generated mipmap levels.
+    int levelCount = mipLevels();
+    for (int level = 1; level < levelCount; level++)
+    {
+        redefineImage(level, getBaseLevelInternalFormat(),
+                      std::max(getBaseLevelWidth() >> level, 1),
+                      std::max(getBaseLevelHeight() >> level, 1));
+    }
+
+    if (mTexStorage && mTexStorage->isRenderTarget())
+    {
+        mTexStorage->generateMipmaps();
+        for (int level = 1; level < levelCount; level++)
+        {
+            mImageArray[level]->markClean();
+        }
+    }
+    else
+    {
+        for (int level = 1; level < levelCount; level++)
+        {
+            mRenderer->generateMipmap(mImageArray[level], mImageArray[level - 1]);
+        }
+    }
+}
+
+unsigned int TextureD3D_2D::getRenderTargetSerial(const gl::ImageIndex &index)
+{
+    ASSERT(!index.hasLayer());
+    return (ensureRenderTarget() ? mTexStorage->getRenderTargetSerial(index) : 0);
+}
+
+RenderTarget *TextureD3D_2D::getRenderTarget(const gl::ImageIndex &index)
+{
+    ASSERT(!index.hasLayer());
+
+    // ensure the underlying texture is created
+    if (!ensureRenderTarget())
+    {
+        return NULL;
+    }
+
+    updateStorageLevel(index.mipIndex);
+    return mTexStorage->getRenderTarget(index);
+}
+
+bool TextureD3D_2D::isValidLevel(int level) const
+{
+    return (mTexStorage ? (level >= 0 && level < mTexStorage->getLevelCount()) : false);
+}
+
+bool TextureD3D_2D::isLevelComplete(int level) const
+{
+    if (isImmutable())
+    {
+        return true;
+    }
+
+    const Image *baseImage = getBaseLevelImage();
+
+    GLsizei width = baseImage->getWidth();
+    GLsizei height = baseImage->getHeight();
+
+    if (width <= 0 || height <= 0)
+    {
+        return false;
+    }
+
+    // The base image level is complete if the width and height are positive
+    if (level == 0)
+    {
+        return true;
+    }
+
+    ASSERT(level >= 1 && level <= (int)ArraySize(mImageArray) && mImageArray[level] != NULL);
+    ImageD3D *image = mImageArray[level];
+
+    if (image->getInternalFormat() != baseImage->getInternalFormat())
+    {
+        return false;
+    }
+
+    if (image->getWidth() != std::max(1, width >> level))
+    {
+        return false;
+    }
+
+    if (image->getHeight() != std::max(1, height >> level))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+// Constructs a native texture resource from the texture images
+void TextureD3D_2D::initializeStorage(bool renderTarget)
+{
+    // Only initialize the first time this texture is used as a render target or shader resource
+    if (mTexStorage)
+    {
+        return;
+    }
+
+    // do not attempt to create storage for nonexistant data
+    if (!isLevelComplete(0))
+    {
+        return;
+    }
+
+    bool createRenderTarget = (renderTarget || IsRenderTargetUsage(mUsage));
+
+    setCompleteTexStorage(createCompleteStorage(createRenderTarget));
+    ASSERT(mTexStorage);
+
+    // flush image data to the storage
+    updateStorage();
+}
+
+TextureStorage *TextureD3D_2D::createCompleteStorage(bool renderTarget) const
+{
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLenum internalFormat = getBaseLevelInternalFormat();
+
+    ASSERT(width > 0 && height > 0);
+
+    // use existing storage level count, when previously specified by TexStorage*D
+    GLint levels = (mTexStorage ? mTexStorage->getLevelCount() : creationLevels(width, height, 1));
+
+    return mRenderer->createTextureStorage2D(internalFormat, renderTarget, width, height, levels);
+}
+
+void TextureD3D_2D::setCompleteTexStorage(TextureStorage *newCompleteTexStorage)
+{
+    SafeDelete(mTexStorage);
+    mTexStorage = newCompleteTexStorage;
+
+    if (mTexStorage && mTexStorage->isManaged())
+    {
+        for (int level = 0; level < mTexStorage->getLevelCount(); level++)
+        {
+            mImageArray[level]->setManagedSurface2D(mTexStorage, level);
+        }
+    }
+
+    mDirtyImages = true;
+}
+
+void TextureD3D_2D::updateStorage()
+{
+    ASSERT(mTexStorage != NULL);
+    GLint storageLevels = mTexStorage->getLevelCount();
+    for (int level = 0; level < storageLevels; level++)
+    {
+        if (mImageArray[level]->isDirty() && isLevelComplete(level))
+        {
+            updateStorageLevel(level);
+        }
+    }
+}
+
+bool TextureD3D_2D::ensureRenderTarget()
+{
+    initializeStorage(true);
+
+    if (getBaseLevelWidth() > 0 && getBaseLevelHeight() > 0)
+    {
+        ASSERT(mTexStorage);
+        if (!mTexStorage->isRenderTarget())
+        {
+            TextureStorage *newRenderTargetStorage = createCompleteStorage(true);
+
+            if (!mRenderer->copyToRenderTarget2D(newRenderTargetStorage, mTexStorage))
+            {
+                delete newRenderTargetStorage;
+                return gl::error(GL_OUT_OF_MEMORY, false);
+            }
+
+            setCompleteTexStorage(newRenderTargetStorage);
+        }
+    }
+
+    return (mTexStorage && mTexStorage->isRenderTarget());
+}
+
+TextureStorage *TextureD3D_2D::getBaseLevelStorage()
+{
+    return mTexStorage;
+}
+
+const ImageD3D *TextureD3D_2D::getBaseLevelImage() const
+{
+    return mImageArray[0];
+}
+
+void TextureD3D_2D::updateStorageLevel(int level)
+{
+    ASSERT(level <= (int)ArraySize(mImageArray) && mImageArray[level] != NULL);
+    ASSERT(isLevelComplete(level));
+
+    if (mImageArray[level]->isDirty())
+    {
+        commitRect(level, 0, 0, getWidth(level), getHeight(level));
+    }
+}
+
+void TextureD3D_2D::redefineImage(GLint level, GLenum internalformat, GLsizei width, GLsizei height)
+{
+    // If there currently is a corresponding storage texture image, it has these parameters
+    const int storageWidth = std::max(1, getBaseLevelWidth() >> level);
+    const int storageHeight = std::max(1, getBaseLevelHeight() >> level);
+    const GLenum storageFormat = getBaseLevelInternalFormat();
+
+    mImageArray[level]->redefine(mRenderer, GL_TEXTURE_2D, internalformat, width, height, 1, false);
+
+    if (mTexStorage)
+    {
+        const int storageLevels = mTexStorage->getLevelCount();
+
+        if ((level >= storageLevels && storageLevels != 0) ||
+            width != storageWidth ||
+            height != storageHeight ||
+            internalformat != storageFormat)   // Discard mismatched storage
+        {
+            for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+            {
+                mImageArray[i]->markDirty();
+            }
+
+            SafeDelete(mTexStorage);
+            mDirtyImages = true;
+        }
+    }
+}
+
+void TextureD3D_2D::commitRect(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+{
+    if (isValidLevel(level))
+    {
+        ImageD3D *image = mImageArray[level];
+        if (image->copyToStorage2D(mTexStorage, level, xoffset, yoffset, width, height))
+        {
+            image->markClean();
+        }
+    }
+}
+
+
+TextureD3D_Cube::TextureD3D_Cube(Renderer *renderer)
+    : TextureD3D(renderer),
+      mTexStorage(NULL)
+{
+    for (int i = 0; i < 6; i++)
+    {
+        for (int j = 0; j < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++j)
+        {
+            mImageArray[i][j] = ImageD3D::makeImageD3D(renderer->createImage());
+        }
+    }
+}
+
+TextureD3D_Cube::~TextureD3D_Cube()
+{
+    // Delete the Images before the TextureStorage.
+    // Images might be relying on the TextureStorage for some of their data.
+    // If TextureStorage is deleted before the Images, then their data will be wastefully copied back from the GPU before we delete the Images.
+    for (int i = 0; i < 6; i++)
+    {
+        for (int j = 0; j < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++j)
+        {
+            SafeDelete(mImageArray[i][j]);
+        }
+    }
+
+    SafeDelete(mTexStorage);
+}
+
+Image *TextureD3D_Cube::getImage(int level, int layer) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(layer < 6);
+    return mImageArray[layer][level];
+}
+
+Image *TextureD3D_Cube::getImage(const gl::ImageIndex &index) const
+{
+    ASSERT(index.mipIndex < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(index.layerIndex < 6);
+    return mImageArray[index.layerIndex][index.mipIndex];
+}
+
+GLsizei TextureD3D_Cube::getLayerCount(int level) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    return 6;
+}
+
+GLenum TextureD3D_Cube::getInternalFormat(GLint level, GLint layer) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[layer][level]->getInternalFormat();
+    else
+        return GL_NONE;
+}
+
+bool TextureD3D_Cube::isDepth(GLint level, GLint layer) const
+{
+    return gl::GetInternalFormatInfo(getInternalFormat(level, layer)).depthBits > 0;
+}
+
+void TextureD3D_Cube::setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(depth == 1);
+
+    int faceIndex = gl::TextureCubeMap::targetToLayerIndex(target);
+    GLenum sizedInternalFormat = gl::GetSizedInternalFormat(internalFormat, type);
+
+    redefineImage(faceIndex, level, sizedInternalFormat, width, height);
+
+    TextureD3D::setImage(unpack, type, pixels, mImageArray[faceIndex][level]);
+}
+
+void TextureD3D_Cube::setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(depth == 1);
+
+    // compressed formats don't have separate sized internal formats-- we can just use the compressed format directly
+    int faceIndex = gl::TextureCubeMap::targetToLayerIndex(target);
+
+    redefineImage(faceIndex, level, format, width, height);
+
+    TextureD3D::setCompressedImage(imageSize, pixels, mImageArray[faceIndex][level]);
+}
+
+void TextureD3D_Cube::subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(depth == 1 && zoffset == 0);
+
+    int faceIndex = gl::TextureCubeMap::targetToLayerIndex(target);
+
+    gl::ImageIndex index = gl::ImageIndex::MakeCube(target, level);
+    if (TextureD3D::subImage(xoffset, yoffset, 0, width, height, 1, format, type, unpack, pixels, index))
+    {
+        commitRect(faceIndex, level, xoffset, yoffset, width, height);
+    }
+}
+
+void TextureD3D_Cube::subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(depth == 1 && zoffset == 0);
+
+    int faceIndex = gl::TextureCubeMap::targetToLayerIndex(target);
+
+    if (TextureD3D::subImageCompressed(xoffset, yoffset, 0, width, height, 1, format, imageSize, pixels, mImageArray[faceIndex][level]))
+    {
+        commitRect(faceIndex, level, xoffset, yoffset, width, height);
+    }
+}
+
+void TextureD3D_Cube::copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    int faceIndex = gl::TextureCubeMap::targetToLayerIndex(target);
+    GLenum sizedInternalFormat = gl::GetSizedInternalFormat(format, GL_UNSIGNED_BYTE);
+
+    redefineImage(faceIndex, level, sizedInternalFormat, width, height);
+
+    if (!mImageArray[faceIndex][level]->isRenderableFormat())
+    {
+        mImageArray[faceIndex][level]->copy(0, 0, 0, x, y, width, height, source);
+        mDirtyImages = true;
+    }
+    else
+    {
+        ensureRenderTarget();
+        mImageArray[faceIndex][level]->markClean();
+
+        ASSERT(width == height);
+
+        if (width > 0 && isValidFaceLevel(faceIndex, level))
+        {
+            gl::Rectangle sourceRect;
+            sourceRect.x = x;
+            sourceRect.width = width;
+            sourceRect.y = y;
+            sourceRect.height = height;
+
+            mRenderer->copyImageCube(source, sourceRect, format, 0, 0, mTexStorage, target, level);
+        }
+    }
+}
+
+void TextureD3D_Cube::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    int faceIndex = gl::TextureCubeMap::targetToLayerIndex(target);
+
+    // We can only make our texture storage to a render target if the level we're copying *to* is complete
+    // and the base level is cube-complete. The base level must be cube complete (common case) because we cannot
+    // rely on the "getBaseLevel*" methods reliably otherwise.
+    bool canCreateRenderTarget = isFaceLevelComplete(faceIndex, level) && isCubeComplete();
+
+    if (!mImageArray[faceIndex][level]->isRenderableFormat() || (!mTexStorage && !canCreateRenderTarget))
+    {
+        mImageArray[faceIndex][level]->copy(0, 0, 0, x, y, width, height, source);
+        mDirtyImages = true;
+    }
+    else
+    {
+        ensureRenderTarget();
+
+        if (isValidFaceLevel(faceIndex, level))
+        {
+            updateStorageFaceLevel(faceIndex, level);
+
+            gl::Rectangle sourceRect;
+            sourceRect.x = x;
+            sourceRect.width = width;
+            sourceRect.y = y;
+            sourceRect.height = height;
+
+            mRenderer->copyImageCube(source, sourceRect, gl::GetInternalFormatInfo(getBaseLevelInternalFormat()).format,
+                                     xoffset, yoffset, mTexStorage, target, level);
+        }
+    }
+}
+
+void TextureD3D_Cube::storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    ASSERT(width == height);
+    ASSERT(depth == 1);
+
+    for (int level = 0; level < levels; level++)
+    {
+        GLsizei mipSize = std::max(1, width >> level);
+        for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+        {
+            mImageArray[faceIndex][level]->redefine(mRenderer, GL_TEXTURE_CUBE_MAP, internalformat, mipSize, mipSize, 1, true);
+        }
+    }
+
+    for (int level = levels; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+        {
+            mImageArray[faceIndex][level]->redefine(mRenderer, GL_TEXTURE_CUBE_MAP, GL_NONE, 0, 0, 0, true);
+        }
+    }
+
+    mImmutable = true;
+
+    bool renderTarget = IsRenderTargetUsage(mUsage);
+    TextureStorage *storage = mRenderer->createTextureStorageCube(internalformat, renderTarget, width, levels);
+    setCompleteTexStorage(storage);
+}
+
+// Tests for cube texture completeness. [OpenGL ES 2.0.24] section 3.7.10 page 81.
+bool TextureD3D_Cube::isCubeComplete() const
+{
+    int    baseWidth  = getBaseLevelWidth();
+    int    baseHeight = getBaseLevelHeight();
+    GLenum baseFormat = getBaseLevelInternalFormat();
+
+    if (baseWidth <= 0 || baseWidth != baseHeight)
+    {
+        return false;
+    }
+
+    for (int faceIndex = 1; faceIndex < 6; faceIndex++)
+    {
+        const ImageD3D &faceBaseImage = *mImageArray[faceIndex][0];
+
+        if (faceBaseImage.getWidth()          != baseWidth  ||
+            faceBaseImage.getHeight()         != baseHeight ||
+            faceBaseImage.getInternalFormat() != baseFormat )
+        {
+            return false;
+        }
+    }
+
+    return true;
+}
+
+void TextureD3D_Cube::bindTexImage(egl::Surface *surface)
+{
+    UNREACHABLE();
+}
+
+void TextureD3D_Cube::releaseTexImage()
+{
+    UNREACHABLE();
+}
+
+
+void TextureD3D_Cube::generateMipmaps()
+{
+    // Purge array levels 1 through q and reset them to represent the generated mipmap levels.
+    int levelCount = mipLevels();
+    for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+    {
+        for (int level = 1; level < levelCount; level++)
+        {
+            int faceLevelSize = (std::max(mImageArray[faceIndex][0]->getWidth() >> level, 1));
+            redefineImage(faceIndex, level, mImageArray[faceIndex][0]->getInternalFormat(), faceLevelSize, faceLevelSize);
+        }
+    }
+
+    if (mTexStorage && mTexStorage->isRenderTarget())
+    {
+        mTexStorage->generateMipmaps();
+
+        for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+        {
+            for (int level = 1; level < levelCount; level++)
+            {
+                mImageArray[faceIndex][level]->markClean();
+            }
+        }
+    }
+    else
+    {
+        for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+        {
+            for (int level = 1; level < levelCount; level++)
+            {
+                mRenderer->generateMipmap(mImageArray[faceIndex][level], mImageArray[faceIndex][level - 1]);
+            }
+        }
+    }
+}
+
+unsigned int TextureD3D_Cube::getRenderTargetSerial(const gl::ImageIndex &index)
+{
+    return (ensureRenderTarget() ? mTexStorage->getRenderTargetSerial(index) : 0);
+}
+
+RenderTarget *TextureD3D_Cube::getRenderTarget(const gl::ImageIndex &index)
+{
+    ASSERT(gl::IsCubemapTextureTarget(index.type));
+
+    // ensure the underlying texture is created
+    if (!ensureRenderTarget())
+    {
+        return NULL;
+    }
+
+    updateStorageFaceLevel(index.layerIndex, index.mipIndex);
+    return mTexStorage->getRenderTarget(index);
+}
+
+void TextureD3D_Cube::initializeStorage(bool renderTarget)
+{
+    // Only initialize the first time this texture is used as a render target or shader resource
+    if (mTexStorage)
+    {
+        return;
+    }
+
+    // do not attempt to create storage for nonexistant data
+    if (!isFaceLevelComplete(0, 0))
+    {
+        return;
+    }
+
+    bool createRenderTarget = (renderTarget || IsRenderTargetUsage(mUsage));
+
+    setCompleteTexStorage(createCompleteStorage(createRenderTarget));
+    ASSERT(mTexStorage);
+
+    // flush image data to the storage
+    updateStorage();
+}
+
+TextureStorage *TextureD3D_Cube::createCompleteStorage(bool renderTarget) const
+{
+    GLsizei size = getBaseLevelWidth();
+
+    ASSERT(size > 0);
+
+    // use existing storage level count, when previously specified by TexStorage*D
+    GLint levels = (mTexStorage ? mTexStorage->getLevelCount() : creationLevels(size, size, 1));
+
+    return mRenderer->createTextureStorageCube(getBaseLevelInternalFormat(), renderTarget, size, levels);
+}
+
+void TextureD3D_Cube::setCompleteTexStorage(TextureStorage *newCompleteTexStorage)
+{
+    SafeDelete(mTexStorage);
+    mTexStorage = newCompleteTexStorage;
+
+    if (mTexStorage && mTexStorage->isManaged())
+    {
+        for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+        {
+            for (int level = 0; level < mTexStorage->getLevelCount(); level++)
+            {
+                mImageArray[faceIndex][level]->setManagedSurfaceCube(mTexStorage, faceIndex, level);
+            }
+        }
+    }
+
+    mDirtyImages = true;
+}
+
+void TextureD3D_Cube::updateStorage()
+{
+    ASSERT(mTexStorage != NULL);
+    GLint storageLevels = mTexStorage->getLevelCount();
+    for (int face = 0; face < 6; face++)
+    {
+        for (int level = 0; level < storageLevels; level++)
+        {
+            if (mImageArray[face][level]->isDirty() && isFaceLevelComplete(face, level))
+            {
+                updateStorageFaceLevel(face, level);
+            }
+        }
+    }
+}
+
+bool TextureD3D_Cube::ensureRenderTarget()
+{
+    initializeStorage(true);
+
+    if (getBaseLevelWidth() > 0)
+    {
+        ASSERT(mTexStorage);
+        if (!mTexStorage->isRenderTarget())
+        {
+            TextureStorage *newRenderTargetStorage = createCompleteStorage(true);
+
+            if (!mRenderer->copyToRenderTargetCube(newRenderTargetStorage, mTexStorage))
+            {
+                delete newRenderTargetStorage;
+                return gl::error(GL_OUT_OF_MEMORY, false);
+            }
+
+            setCompleteTexStorage(newRenderTargetStorage);
+        }
+    }
+
+    return (mTexStorage && mTexStorage->isRenderTarget());
+}
+
+TextureStorage *TextureD3D_Cube::getBaseLevelStorage()
+{
+    return mTexStorage;
+}
+
+const ImageD3D *TextureD3D_Cube::getBaseLevelImage() const
+{
+    // Note: if we are not cube-complete, there is no single base level image that can describe all
+    // cube faces, so this method is only well-defined for a cube-complete base level.
+    return mImageArray[0][0];
+}
+
+bool TextureD3D_Cube::isValidFaceLevel(int faceIndex, int level) const
+{
+    return (mTexStorage ? (level >= 0 && level < mTexStorage->getLevelCount()) : 0);
+}
+
+bool TextureD3D_Cube::isFaceLevelComplete(int faceIndex, int level) const
+{
+    ASSERT(level >= 0 && faceIndex < 6 && level < (int)ArraySize(mImageArray[faceIndex]) && mImageArray[faceIndex][level] != NULL);
+
+    if (isImmutable())
+    {
+        return true;
+    }
+
+    int baseSize = getBaseLevelWidth();
+
+    if (baseSize <= 0)
+    {
+        return false;
+    }
+
+    // "isCubeComplete" checks for base level completeness and we must call that
+    // to determine if any face at level 0 is complete. We omit that check here
+    // to avoid re-checking cube-completeness for every face at level 0.
+    if (level == 0)
+    {
+        return true;
+    }
+
+    // Check that non-zero levels are consistent with the base level.
+    const ImageD3D *faceLevelImage = mImageArray[faceIndex][level];
+
+    if (faceLevelImage->getInternalFormat() != getBaseLevelInternalFormat())
+    {
+        return false;
+    }
+
+    if (faceLevelImage->getWidth() != std::max(1, baseSize >> level))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+void TextureD3D_Cube::updateStorageFaceLevel(int faceIndex, int level)
+{
+    ASSERT(level >= 0 && faceIndex < 6 && level < (int)ArraySize(mImageArray[faceIndex]) && mImageArray[faceIndex][level] != NULL);
+    ImageD3D *image = mImageArray[faceIndex][level];
+
+    if (image->isDirty())
+    {
+        commitRect(faceIndex, level, 0, 0, image->getWidth(), image->getHeight());
+    }
+}
+
+void TextureD3D_Cube::redefineImage(int faceIndex, GLint level, GLenum internalformat, GLsizei width, GLsizei height)
+{
+    // If there currently is a corresponding storage texture image, it has these parameters
+    const int storageWidth = std::max(1, getBaseLevelWidth() >> level);
+    const int storageHeight = std::max(1, getBaseLevelHeight() >> level);
+    const GLenum storageFormat = getBaseLevelInternalFormat();
+
+    mImageArray[faceIndex][level]->redefine(mRenderer, GL_TEXTURE_CUBE_MAP, internalformat, width, height, 1, false);
+
+    if (mTexStorage)
+    {
+        const int storageLevels = mTexStorage->getLevelCount();
+
+        if ((level >= storageLevels && storageLevels != 0) ||
+            width != storageWidth ||
+            height != storageHeight ||
+            internalformat != storageFormat)   // Discard mismatched storage
+        {
+            for (int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+            {
+                for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+                {
+                    mImageArray[faceIndex][level]->markDirty();
+                }
+            }
+
+            SafeDelete(mTexStorage);
+
+            mDirtyImages = true;
+        }
+    }
+}
+
+void TextureD3D_Cube::commitRect(int faceIndex, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+{
+    if (isValidFaceLevel(faceIndex, level))
+    {
+        ImageD3D *image = mImageArray[faceIndex][level];
+        if (image->copyToStorageCube(mTexStorage, faceIndex, level, xoffset, yoffset, width, height))
+            image->markClean();
+    }
+}
+
+
+TextureD3D_3D::TextureD3D_3D(Renderer *renderer)
+    : TextureD3D(renderer),
+      mTexStorage(NULL)
+{
+    for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++i)
+    {
+        mImageArray[i] = ImageD3D::makeImageD3D(renderer->createImage());
+    }
+}
+
+TextureD3D_3D::~TextureD3D_3D()
+{
+    // Delete the Images before the TextureStorage.
+    // Images might be relying on the TextureStorage for some of their data.
+    // If TextureStorage is deleted before the Images, then their data will be wastefully copied back from the GPU before we delete the Images.
+    for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++i)
+    {
+        delete mImageArray[i];
+    }
+
+    SafeDelete(mTexStorage);
+}
+
+Image *TextureD3D_3D::getImage(int level, int layer) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(layer == 0);
+    return mImageArray[level];
+}
+
+Image *TextureD3D_3D::getImage(const gl::ImageIndex &index) const
+{
+    ASSERT(index.mipIndex < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(!index.hasLayer());
+    ASSERT(index.type == GL_TEXTURE_3D);
+    return mImageArray[index.mipIndex];
+}
+
+GLsizei TextureD3D_3D::getLayerCount(int level) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    return 1;
+}
+
+GLsizei TextureD3D_3D::getWidth(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getWidth();
+    else
+        return 0;
+}
+
+GLsizei TextureD3D_3D::getHeight(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getHeight();
+    else
+        return 0;
+}
+
+GLsizei TextureD3D_3D::getDepth(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getDepth();
+    else
+        return 0;
+}
+
+GLenum TextureD3D_3D::getInternalFormat(GLint level) const
+{
+    if (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+        return mImageArray[level]->getInternalFormat();
+    else
+        return GL_NONE;
+}
+
+bool TextureD3D_3D::isDepth(GLint level) const
+{
+    return gl::GetInternalFormatInfo(getInternalFormat(level)).depthBits > 0;
+}
+
+void TextureD3D_3D::setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_3D);
+    GLenum sizedInternalFormat = gl::GetSizedInternalFormat(internalFormat, type);
+
+    redefineImage(level, sizedInternalFormat, width, height, depth);
+
+    bool fastUnpacked = false;
+
+    // Attempt a fast gpu copy of the pixel data to the surface if the app bound an unpack buffer
+    if (isFastUnpackable(unpack, sizedInternalFormat))
+    {
+        // Will try to create RT storage if it does not exist
+        gl::ImageIndex index = gl::ImageIndex::Make3D(level);
+        RenderTarget *destRenderTarget = getRenderTarget(index);
+        gl::Box destArea(0, 0, 0, getWidth(level), getHeight(level), getDepth(level));
+
+        if (destRenderTarget && fastUnpackPixels(unpack, pixels, destArea, sizedInternalFormat, type, destRenderTarget))
+        {
+            // Ensure we don't overwrite our newly initialized data
+            mImageArray[level]->markClean();
+
+            fastUnpacked = true;
+        }
+    }
+
+    if (!fastUnpacked)
+    {
+        TextureD3D::setImage(unpack, type, pixels, mImageArray[level]);
+    }
+}
+
+void TextureD3D_3D::setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_3D);
+
+    // compressed formats don't have separate sized internal formats-- we can just use the compressed format directly
+    redefineImage(level, format, width, height, depth);
+
+    TextureD3D::setCompressedImage(imageSize, pixels, mImageArray[level]);
+}
+
+void TextureD3D_3D::subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_3D);
+
+    bool fastUnpacked = false;
+
+    gl::ImageIndex index = gl::ImageIndex::Make3D(level);
+
+    // Attempt a fast gpu copy of the pixel data to the surface if the app bound an unpack buffer
+    if (isFastUnpackable(unpack, getInternalFormat(level)))
+    {
+        RenderTarget *destRenderTarget = getRenderTarget(index);
+        gl::Box destArea(xoffset, yoffset, zoffset, width, height, depth);
+
+        if (destRenderTarget && fastUnpackPixels(unpack, pixels, destArea, getInternalFormat(level), type, destRenderTarget))
+        {
+            // Ensure we don't overwrite our newly initialized data
+            mImageArray[level]->markClean();
+
+            fastUnpacked = true;
+        }
+    }
+
+    if (!fastUnpacked && TextureD3D::subImage(xoffset, yoffset, zoffset, width, height, depth, format, type, unpack, pixels, index))
+    {
+        commitRect(level, xoffset, yoffset, zoffset, width, height, depth);
+    }
+}
+
+void TextureD3D_3D::subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_3D);
+
+    if (TextureD3D::subImageCompressed(xoffset, yoffset, zoffset, width, height, depth, format, imageSize, pixels, mImageArray[level]))
+    {
+        commitRect(level, xoffset, yoffset, zoffset, width, height, depth);
+    }
+}
+
+void TextureD3D_3D::copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    UNIMPLEMENTED();
+}
+
+void TextureD3D_3D::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    ASSERT(target == GL_TEXTURE_3D);
+
+    // can only make our texture storage to a render target if level 0 is defined (with a width & height) and
+    // the current level we're copying to is defined (with appropriate format, width & height)
+    bool canCreateRenderTarget = isLevelComplete(level) && isLevelComplete(0);
+
+    if (!mImageArray[level]->isRenderableFormat() || (!mTexStorage && !canCreateRenderTarget))
+    {
+        mImageArray[level]->copy(xoffset, yoffset, zoffset, x, y, width, height, source);
+        mDirtyImages = true;
+    }
+    else
+    {
+        ensureRenderTarget();
+
+        if (isValidLevel(level))
+        {
+            updateStorageLevel(level);
+
+            gl::Rectangle sourceRect;
+            sourceRect.x = x;
+            sourceRect.width = width;
+            sourceRect.y = y;
+            sourceRect.height = height;
+
+            mRenderer->copyImage3D(source, sourceRect,
+                                   gl::GetInternalFormatInfo(getBaseLevelInternalFormat()).format,
+                                   xoffset, yoffset, zoffset, mTexStorage, level);
+        }
+    }
+}
+
+void TextureD3D_3D::storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    ASSERT(target == GL_TEXTURE_3D);
+
+    for (int level = 0; level < levels; level++)
+    {
+        GLsizei levelWidth = std::max(1, width >> level);
+        GLsizei levelHeight = std::max(1, height >> level);
+        GLsizei levelDepth = std::max(1, depth >> level);
+        mImageArray[level]->redefine(mRenderer, GL_TEXTURE_3D, internalformat, levelWidth, levelHeight, levelDepth, true);
+    }
+
+    for (int level = levels; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        mImageArray[level]->redefine(mRenderer, GL_TEXTURE_3D, GL_NONE, 0, 0, 0, true);
+    }
+
+    mImmutable = true;
+
+    bool renderTarget = IsRenderTargetUsage(mUsage);
+    TextureStorage *storage = mRenderer->createTextureStorage3D(internalformat, renderTarget, width, height, depth, levels);
+    setCompleteTexStorage(storage);
+}
+
+void TextureD3D_3D::bindTexImage(egl::Surface *surface)
+{
+    UNREACHABLE();
+}
+
+void TextureD3D_3D::releaseTexImage()
+{
+    UNREACHABLE();
+}
+
+
+void TextureD3D_3D::generateMipmaps()
+{
+    // Purge array levels 1 through q and reset them to represent the generated mipmap levels.
+    int levelCount = mipLevels();
+    for (int level = 1; level < levelCount; level++)
+    {
+        redefineImage(level, getBaseLevelInternalFormat(),
+                      std::max(getBaseLevelWidth() >> level, 1),
+                      std::max(getBaseLevelHeight() >> level, 1),
+                      std::max(getBaseLevelDepth() >> level, 1));
+    }
+
+    if (mTexStorage && mTexStorage->isRenderTarget())
+    {
+        mTexStorage->generateMipmaps();
+
+        for (int level = 1; level < levelCount; level++)
+        {
+            mImageArray[level]->markClean();
+        }
+    }
+    else
+    {
+        for (int level = 1; level < levelCount; level++)
+        {
+            mRenderer->generateMipmap(mImageArray[level], mImageArray[level - 1]);
+        }
+    }
+}
+
+unsigned int TextureD3D_3D::getRenderTargetSerial(const gl::ImageIndex &index)
+{
+    return (ensureRenderTarget() ? mTexStorage->getRenderTargetSerial(index) : 0);
+}
+
+RenderTarget *TextureD3D_3D::getRenderTarget(const gl::ImageIndex &index)
+{
+    // ensure the underlying texture is created
+    if (!ensureRenderTarget())
+    {
+        return NULL;
+    }
+
+    if (index.hasLayer())
+    {
+        updateStorage();
+    }
+    else
+    {
+        updateStorageLevel(index.mipIndex);
+    }
+
+    return mTexStorage->getRenderTarget(index);
+}
+
+void TextureD3D_3D::initializeStorage(bool renderTarget)
+{
+    // Only initialize the first time this texture is used as a render target or shader resource
+    if (mTexStorage)
+    {
+        return;
+    }
+
+    // do not attempt to create storage for nonexistant data
+    if (!isLevelComplete(0))
+    {
+        return;
+    }
+
+    bool createRenderTarget = (renderTarget || mUsage == GL_FRAMEBUFFER_ATTACHMENT_ANGLE);
+
+    setCompleteTexStorage(createCompleteStorage(createRenderTarget));
+    ASSERT(mTexStorage);
+
+    // flush image data to the storage
+    updateStorage();
+}
+
+TextureStorage *TextureD3D_3D::createCompleteStorage(bool renderTarget) const
+{
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei depth = getBaseLevelDepth();
+    GLenum internalFormat = getBaseLevelInternalFormat();
+
+    ASSERT(width > 0 && height > 0 && depth > 0);
+
+    // use existing storage level count, when previously specified by TexStorage*D
+    GLint levels = (mTexStorage ? mTexStorage->getLevelCount() : creationLevels(width, height, depth));
+
+    return mRenderer->createTextureStorage3D(internalFormat, renderTarget, width, height, depth, levels);
+}
+
+void TextureD3D_3D::setCompleteTexStorage(TextureStorage *newCompleteTexStorage)
+{
+    SafeDelete(mTexStorage);
+    mTexStorage = newCompleteTexStorage;
+    mDirtyImages = true;
+
+    // We do not support managed 3D storage, as that is D3D9/ES2-only
+    ASSERT(!mTexStorage->isManaged());
+}
+
+void TextureD3D_3D::updateStorage()
+{
+    ASSERT(mTexStorage != NULL);
+    GLint storageLevels = mTexStorage->getLevelCount();
+    for (int level = 0; level < storageLevels; level++)
+    {
+        if (mImageArray[level]->isDirty() && isLevelComplete(level))
+        {
+            updateStorageLevel(level);
+        }
+    }
+}
+
+bool TextureD3D_3D::ensureRenderTarget()
+{
+    initializeStorage(true);
+
+    if (getBaseLevelWidth() > 0 && getBaseLevelHeight() > 0 && getBaseLevelDepth() > 0)
+    {
+        ASSERT(mTexStorage);
+        if (!mTexStorage->isRenderTarget())
+        {
+            TextureStorage *newRenderTargetStorage = createCompleteStorage(true);
+
+            if (!mRenderer->copyToRenderTarget3D(newRenderTargetStorage, mTexStorage))
+            {
+                delete newRenderTargetStorage;
+                return gl::error(GL_OUT_OF_MEMORY, false);
+            }
+
+            setCompleteTexStorage(newRenderTargetStorage);
+        }
+    }
+
+    return (mTexStorage && mTexStorage->isRenderTarget());
+}
+
+TextureStorage *TextureD3D_3D::getBaseLevelStorage()
+{
+    return mTexStorage;
+}
+
+const ImageD3D *TextureD3D_3D::getBaseLevelImage() const
+{
+    return mImageArray[0];
+}
+
+bool TextureD3D_3D::isValidLevel(int level) const
+{
+    return (mTexStorage ? (level >= 0 && level < mTexStorage->getLevelCount()) : 0);
+}
+
+bool TextureD3D_3D::isLevelComplete(int level) const
+{
+    ASSERT(level >= 0 && level < (int)ArraySize(mImageArray) && mImageArray[level] != NULL);
+
+    if (isImmutable())
+    {
+        return true;
+    }
+
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei depth = getBaseLevelDepth();
+
+    if (width <= 0 || height <= 0 || depth <= 0)
+    {
+        return false;
+    }
+
+    if (level == 0)
+    {
+        return true;
+    }
+
+    ImageD3D *levelImage = mImageArray[level];
+
+    if (levelImage->getInternalFormat() != getBaseLevelInternalFormat())
+    {
+        return false;
+    }
+
+    if (levelImage->getWidth() != std::max(1, width >> level))
+    {
+        return false;
+    }
+
+    if (levelImage->getHeight() != std::max(1, height >> level))
+    {
+        return false;
+    }
+
+    if (levelImage->getDepth() != std::max(1, depth >> level))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+void TextureD3D_3D::updateStorageLevel(int level)
+{
+    ASSERT(level >= 0 && level < (int)ArraySize(mImageArray) && mImageArray[level] != NULL);
+    ASSERT(isLevelComplete(level));
+
+    if (mImageArray[level]->isDirty())
+    {
+        commitRect(level, 0, 0, 0, getWidth(level), getHeight(level), getDepth(level));
+    }
+}
+
+void TextureD3D_3D::redefineImage(GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    // If there currently is a corresponding storage texture image, it has these parameters
+    const int storageWidth = std::max(1, getBaseLevelWidth() >> level);
+    const int storageHeight = std::max(1, getBaseLevelHeight() >> level);
+    const int storageDepth = std::max(1, getBaseLevelDepth() >> level);
+    const GLenum storageFormat = getBaseLevelInternalFormat();
+
+    mImageArray[level]->redefine(mRenderer, GL_TEXTURE_3D, internalformat, width, height, depth, false);
+
+    if (mTexStorage)
+    {
+        const int storageLevels = mTexStorage->getLevelCount();
+
+        if ((level >= storageLevels && storageLevels != 0) ||
+            width != storageWidth ||
+            height != storageHeight ||
+            depth != storageDepth ||
+            internalformat != storageFormat)   // Discard mismatched storage
+        {
+            for (int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+            {
+                mImageArray[i]->markDirty();
+            }
+
+            SafeDelete(mTexStorage);
+            mDirtyImages = true;
+        }
+    }
+}
+
+void TextureD3D_3D::commitRect(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth)
+{
+    if (isValidLevel(level))
+    {
+        ImageD3D *image = mImageArray[level];
+        if (image->copyToStorage3D(mTexStorage, level, xoffset, yoffset, zoffset, width, height, depth))
+        {
+            image->markClean();
+        }
+    }
+}
+
+
+TextureD3D_2DArray::TextureD3D_2DArray(Renderer *renderer)
+    : TextureD3D(renderer),
+      mTexStorage(NULL)
+{
+    for (int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++level)
+    {
+        mLayerCounts[level] = 0;
+        mImageArray[level] = NULL;
+    }
+}
+
+TextureD3D_2DArray::~TextureD3D_2DArray()
+{
+    // Delete the Images before the TextureStorage.
+    // Images might be relying on the TextureStorage for some of their data.
+    // If TextureStorage is deleted before the Images, then their data will be wastefully copied back from the GPU before we delete the Images.
+    deleteImages();
+    SafeDelete(mTexStorage);
+}
+
+Image *TextureD3D_2DArray::getImage(int level, int layer) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(layer < mLayerCounts[level]);
+    return mImageArray[level][layer];
+}
+
+Image *TextureD3D_2DArray::getImage(const gl::ImageIndex &index) const
+{
+    ASSERT(index.mipIndex < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(index.layerIndex < mLayerCounts[index.mipIndex]);
+    ASSERT(index.type == GL_TEXTURE_2D_ARRAY);
+    return mImageArray[index.mipIndex][index.layerIndex];
+}
+
+GLsizei TextureD3D_2DArray::getLayerCount(int level) const
+{
+    ASSERT(level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    return mLayerCounts[level];
+}
+
+GLsizei TextureD3D_2DArray::getWidth(GLint level) const
+{
+    return (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS && mLayerCounts[level] > 0) ? mImageArray[level][0]->getWidth() : 0;
+}
+
+GLsizei TextureD3D_2DArray::getHeight(GLint level) const
+{
+    return (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS && mLayerCounts[level] > 0) ? mImageArray[level][0]->getHeight() : 0;
+}
+
+GLsizei TextureD3D_2DArray::getLayers(GLint level) const
+{
+    return (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS) ? mLayerCounts[level] : 0;
+}
+
+GLenum TextureD3D_2DArray::getInternalFormat(GLint level) const
+{
+    return (level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS && mLayerCounts[level] > 0) ? mImageArray[level][0]->getInternalFormat() : GL_NONE;
+}
+
+bool TextureD3D_2DArray::isDepth(GLint level) const
+{
+    return gl::GetInternalFormatInfo(getInternalFormat(level)).depthBits > 0;
+}
+
+void TextureD3D_2DArray::setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D_ARRAY);
+
+    GLenum sizedInternalFormat = gl::GetSizedInternalFormat(internalFormat, type);
+
+    redefineImage(level, sizedInternalFormat, width, height, depth);
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(sizedInternalFormat);
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(type, width, height, unpack.alignment);
+
+    for (int i = 0; i < depth; i++)
+    {
+        const void *layerPixels = pixels ? (reinterpret_cast<const unsigned char*>(pixels) + (inputDepthPitch * i)) : NULL;
+        TextureD3D::setImage(unpack, type, layerPixels, mImageArray[level][i]);
+    }
+}
+
+void TextureD3D_2DArray::setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D_ARRAY);
+
+    // compressed formats don't have separate sized internal formats-- we can just use the compressed format directly
+    redefineImage(level, format, width, height, depth);
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(format);
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(GL_UNSIGNED_BYTE, width, height, 1);
+
+    for (int i = 0; i < depth; i++)
+    {
+        const void *layerPixels = pixels ? (reinterpret_cast<const unsigned char*>(pixels) + (inputDepthPitch * i)) : NULL;
+        TextureD3D::setCompressedImage(imageSize, layerPixels, mImageArray[level][i]);
+    }
+}
+
+void TextureD3D_2DArray::subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D_ARRAY);
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(getInternalFormat(level));
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(type, width, height, unpack.alignment);
+
+    for (int i = 0; i < depth; i++)
+    {
+        int layer = zoffset + i;
+        const void *layerPixels = pixels ? (reinterpret_cast<const unsigned char*>(pixels) + (inputDepthPitch * i)) : NULL;
+
+        gl::ImageIndex index = gl::ImageIndex::Make2DArray(level, layer);
+        if (TextureD3D::subImage(xoffset, yoffset, zoffset, width, height, 1, format, type, unpack, layerPixels, index))
+        {
+            commitRect(level, xoffset, yoffset, layer, width, height);
+        }
+    }
+}
+
+void TextureD3D_2DArray::subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels)
+{
+    ASSERT(target == GL_TEXTURE_2D_ARRAY);
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(format);
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(GL_UNSIGNED_BYTE, width, height, 1);
+
+    for (int i = 0; i < depth; i++)
+    {
+        int layer = zoffset + i;
+        const void *layerPixels = pixels ? (reinterpret_cast<const unsigned char*>(pixels) + (inputDepthPitch * i)) : NULL;
+
+        if (TextureD3D::subImageCompressed(xoffset, yoffset, zoffset, width, height, 1, format, imageSize, layerPixels, mImageArray[level][layer]))
+        {
+            commitRect(level, xoffset, yoffset, layer, width, height);
+        }
+    }
+}
+
+void TextureD3D_2DArray::copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    UNIMPLEMENTED();
+}
+
+void TextureD3D_2DArray::copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    ASSERT(target == GL_TEXTURE_2D_ARRAY);
+
+    // can only make our texture storage to a render target if level 0 is defined (with a width & height) and
+    // the current level we're copying to is defined (with appropriate format, width & height)
+    bool canCreateRenderTarget = isLevelComplete(level) && isLevelComplete(0);
+
+    if (!mImageArray[level][0]->isRenderableFormat() || (!mTexStorage && !canCreateRenderTarget))
+    {
+        mImageArray[level][zoffset]->copy(xoffset, yoffset, 0, x, y, width, height, source);
+        mDirtyImages = true;
+    }
+    else
+    {
+        ensureRenderTarget();
+
+        if (isValidLevel(level))
+        {
+            updateStorageLevel(level);
+
+            gl::Rectangle sourceRect;
+            sourceRect.x = x;
+            sourceRect.width = width;
+            sourceRect.y = y;
+            sourceRect.height = height;
+
+            mRenderer->copyImage2DArray(source, sourceRect, gl::GetInternalFormatInfo(getInternalFormat(0)).format,
+                                        xoffset, yoffset, zoffset, mTexStorage, level);
+        }
+    }
+}
+
+void TextureD3D_2DArray::storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    ASSERT(target == GL_TEXTURE_2D_ARRAY);
+
+    deleteImages();
+
+    for (int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        GLsizei levelWidth = std::max(1, width >> level);
+        GLsizei levelHeight = std::max(1, height >> level);
+
+        mLayerCounts[level] = (level < levels ? depth : 0);
+
+        if (mLayerCounts[level] > 0)
+        {
+            // Create new images for this level
+            mImageArray[level] = new ImageD3D*[mLayerCounts[level]];
+
+            for (int layer = 0; layer < mLayerCounts[level]; layer++)
+            {
+                mImageArray[level][layer] = ImageD3D::makeImageD3D(mRenderer->createImage());
+                mImageArray[level][layer]->redefine(mRenderer, GL_TEXTURE_2D_ARRAY, internalformat, levelWidth,
+                                                    levelHeight, 1, true);
+            }
+        }
+    }
+
+    mImmutable = true;
+
+    bool renderTarget = IsRenderTargetUsage(mUsage);
+    TextureStorage *storage = mRenderer->createTextureStorage2DArray(internalformat, renderTarget, width, height, depth, levels);
+    setCompleteTexStorage(storage);
+}
+
+void TextureD3D_2DArray::bindTexImage(egl::Surface *surface)
+{
+    UNREACHABLE();
+}
+
+void TextureD3D_2DArray::releaseTexImage()
+{
+    UNREACHABLE();
+}
+
+
+void TextureD3D_2DArray::generateMipmaps()
+{
+    int baseWidth = getBaseLevelWidth();
+    int baseHeight = getBaseLevelHeight();
+    int baseDepth = getBaseLevelDepth();
+    GLenum baseFormat = getBaseLevelInternalFormat();
+
+    // Purge array levels 1 through q and reset them to represent the generated mipmap levels.
+    int levelCount = mipLevels();
+    for (int level = 1; level < levelCount; level++)
+    {
+        redefineImage(level, baseFormat, std::max(baseWidth >> level, 1), std::max(baseHeight >> level, 1), baseDepth);
+    }
+
+    if (mTexStorage && mTexStorage->isRenderTarget())
+    {
+        mTexStorage->generateMipmaps();
+
+        for (int level = 1; level < levelCount; level++)
+        {
+            for (int layer = 0; layer < mLayerCounts[level]; layer++)
+            {
+                mImageArray[level][layer]->markClean();
+            }
+        }
+    }
+    else
+    {
+        for (int level = 1; level < levelCount; level++)
+        {
+            for (int layer = 0; layer < mLayerCounts[level]; layer++)
+            {
+                mRenderer->generateMipmap(mImageArray[level][layer], mImageArray[level - 1][layer]);
+            }
+        }
+    }
+}
+
+unsigned int TextureD3D_2DArray::getRenderTargetSerial(const gl::ImageIndex &index)
+{
+    return (ensureRenderTarget() ? mTexStorage->getRenderTargetSerial(index) : 0);
+}
+
+RenderTarget *TextureD3D_2DArray::getRenderTarget(const gl::ImageIndex &index)
+{
+    // ensure the underlying texture is created
+    if (!ensureRenderTarget())
+    {
+        return NULL;
+    }
+
+    updateStorageLevel(index.mipIndex);
+    return mTexStorage->getRenderTarget(index);
+}
+
+void TextureD3D_2DArray::initializeStorage(bool renderTarget)
+{
+    // Only initialize the first time this texture is used as a render target or shader resource
+    if (mTexStorage)
+    {
+        return;
+    }
+
+    // do not attempt to create storage for nonexistant data
+    if (!isLevelComplete(0))
+    {
+        return;
+    }
+
+    bool createRenderTarget = (renderTarget || mUsage == GL_FRAMEBUFFER_ATTACHMENT_ANGLE);
+
+    setCompleteTexStorage(createCompleteStorage(createRenderTarget));
+    ASSERT(mTexStorage);
+
+    // flush image data to the storage
+    updateStorage();
+}
+
+TextureStorage *TextureD3D_2DArray::createCompleteStorage(bool renderTarget) const
+{
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei depth = getLayers(0);
+    GLenum internalFormat = getBaseLevelInternalFormat();
+
+    ASSERT(width > 0 && height > 0 && depth > 0);
+
+    // use existing storage level count, when previously specified by TexStorage*D
+    GLint levels = (mTexStorage ? mTexStorage->getLevelCount() : creationLevels(width, height, 1));
+
+    return mRenderer->createTextureStorage2DArray(internalFormat, renderTarget, width, height, depth, levels);
+}
+
+void TextureD3D_2DArray::setCompleteTexStorage(TextureStorage *newCompleteTexStorage)
+{
+    SafeDelete(mTexStorage);
+    mTexStorage = newCompleteTexStorage;
+    mDirtyImages = true;
+
+    // We do not support managed 2D array storage, as managed storage is ES2/D3D9 only
+    ASSERT(!mTexStorage->isManaged());
+}
+
+void TextureD3D_2DArray::updateStorage()
+{
+    ASSERT(mTexStorage != NULL);
+    GLint storageLevels = mTexStorage->getLevelCount();
+    for (int level = 0; level < storageLevels; level++)
+    {
+        if (isLevelComplete(level))
+        {
+            updateStorageLevel(level);
+        }
+    }
+}
+
+bool TextureD3D_2DArray::ensureRenderTarget()
+{
+    initializeStorage(true);
+
+    if (getBaseLevelWidth() > 0 && getBaseLevelHeight() > 0 && getLayers(0) > 0)
+    {
+        ASSERT(mTexStorage);
+        if (!mTexStorage->isRenderTarget())
+        {
+            TextureStorage *newRenderTargetStorage = createCompleteStorage(true);
+
+            if (!mRenderer->copyToRenderTarget2DArray(newRenderTargetStorage, mTexStorage))
+            {
+                delete newRenderTargetStorage;
+                return gl::error(GL_OUT_OF_MEMORY, false);
+            }
+
+            setCompleteTexStorage(newRenderTargetStorage);
+        }
+    }
+
+    return (mTexStorage && mTexStorage->isRenderTarget());
+}
+
+const ImageD3D *TextureD3D_2DArray::getBaseLevelImage() const
+{
+    return (mLayerCounts[0] > 0 ? mImageArray[0][0] : NULL);
+}
+
+TextureStorage *TextureD3D_2DArray::getBaseLevelStorage()
+{
+    return mTexStorage;
+}
+
+bool TextureD3D_2DArray::isValidLevel(int level) const
+{
+    return (mTexStorage ? (level >= 0 && level < mTexStorage->getLevelCount()) : 0);
+}
+
+bool TextureD3D_2DArray::isLevelComplete(int level) const
+{
+    ASSERT(level >= 0 && level < (int)ArraySize(mImageArray));
+
+    if (isImmutable())
+    {
+        return true;
+    }
+
+    GLsizei width = getBaseLevelWidth();
+    GLsizei height = getBaseLevelHeight();
+    GLsizei layers = getLayers(0);
+
+    if (width <= 0 || height <= 0 || layers <= 0)
+    {
+        return false;
+    }
+
+    if (level == 0)
+    {
+        return true;
+    }
+
+    if (getInternalFormat(level) != getInternalFormat(0))
+    {
+        return false;
+    }
+
+    if (getWidth(level) != std::max(1, width >> level))
+    {
+        return false;
+    }
+
+    if (getHeight(level) != std::max(1, height >> level))
+    {
+        return false;
+    }
+
+    if (getLayers(level) != layers)
+    {
+        return false;
+    }
+
+    return true;
+}
+
+void TextureD3D_2DArray::updateStorageLevel(int level)
+{
+    ASSERT(level >= 0 && level < (int)ArraySize(mLayerCounts));
+    ASSERT(isLevelComplete(level));
+
+    for (int layer = 0; layer < mLayerCounts[level]; layer++)
+    {
+        ASSERT(mImageArray[level] != NULL && mImageArray[level][layer] != NULL);
+        if (mImageArray[level][layer]->isDirty())
+        {
+            commitRect(level, 0, 0, layer, getWidth(level), getHeight(level));
+        }
+    }
+}
+
+void TextureD3D_2DArray::deleteImages()
+{
+    for (int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; ++level)
+    {
+        for (int layer = 0; layer < mLayerCounts[level]; ++layer)
+        {
+            delete mImageArray[level][layer];
+        }
+        delete[] mImageArray[level];
+        mImageArray[level] = NULL;
+        mLayerCounts[level] = 0;
+    }
+}
+
+void TextureD3D_2DArray::redefineImage(GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth)
+{
+    // If there currently is a corresponding storage texture image, it has these parameters
+    const int storageWidth = std::max(1, getBaseLevelWidth() >> level);
+    const int storageHeight = std::max(1, getBaseLevelHeight() >> level);
+    const int storageDepth = getLayers(0);
+    const GLenum storageFormat = getBaseLevelInternalFormat();
+
+    for (int layer = 0; layer < mLayerCounts[level]; layer++)
+    {
+        delete mImageArray[level][layer];
+    }
+    delete[] mImageArray[level];
+    mImageArray[level] = NULL;
+    mLayerCounts[level] = depth;
+
+    if (depth > 0)
+    {
+        mImageArray[level] = new ImageD3D*[depth]();
+
+        for (int layer = 0; layer < mLayerCounts[level]; layer++)
+        {
+            mImageArray[level][layer] = ImageD3D::makeImageD3D(mRenderer->createImage());
+            mImageArray[level][layer]->redefine(mRenderer, GL_TEXTURE_2D_ARRAY, internalformat, width, height, 1, false);
+        }
+    }
+
+    if (mTexStorage)
+    {
+        const int storageLevels = mTexStorage->getLevelCount();
+
+        if ((level >= storageLevels && storageLevels != 0) ||
+            width != storageWidth ||
+            height != storageHeight ||
+            depth != storageDepth ||
+            internalformat != storageFormat)   // Discard mismatched storage
+        {
+            for (int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+            {
+                for (int layer = 0; layer < mLayerCounts[level]; layer++)
+                {
+                    mImageArray[level][layer]->markDirty();
+                }
+            }
+
+            delete mTexStorage;
+            mTexStorage = NULL;
+            mDirtyImages = true;
+        }
+    }
+}
+
+void TextureD3D_2DArray::commitRect(GLint level, GLint xoffset, GLint yoffset, GLint layerTarget, GLsizei width, GLsizei height)
+{
+    if (isValidLevel(level) && layerTarget < getLayers(level))
+    {
+        ImageD3D *image = mImageArray[level][layerTarget];
+        if (image->copyToStorage2DArray(mTexStorage, level, xoffset, yoffset, layerTarget, width, height))
+        {
+            image->markClean();
+        }
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.h
new file mode 100644
index 0000000000..41c73180de
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.h
@@ -0,0 +1,320 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureD3D.h: Implementations of the Texture interfaces shared betweeen the D3D backends.
+
+#ifndef LIBGLESV2_RENDERER_TEXTURED3D_H_
+#define LIBGLESV2_RENDERER_TEXTURED3D_H_
+
+#include "libGLESv2/renderer/TextureImpl.h"
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/constants.h"
+
+namespace gl
+{
+class Framebuffer;
+}
+
+namespace rx
+{
+
+class Image;
+class ImageD3D;
+class Renderer;
+class RenderTarget;
+class TextureStorage;
+
+class TextureD3D : public TextureImpl
+{
+  public:
+    TextureD3D(Renderer *renderer);
+    virtual ~TextureD3D();
+
+    static TextureD3D *makeTextureD3D(TextureImpl *texture);
+
+    virtual TextureStorage *getNativeTexture();
+
+    virtual void setUsage(GLenum usage) { mUsage = usage; }
+    bool hasDirtyImages() const { return mDirtyImages; }
+    void resetDirty() { mDirtyImages = false; }
+
+    GLint getBaseLevelWidth() const;
+    GLint getBaseLevelHeight() const;
+    GLint getBaseLevelDepth() const;
+    GLenum getBaseLevelInternalFormat() const;
+
+    bool isImmutable() const { return mImmutable; }
+
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index) = 0;
+    virtual unsigned int getRenderTargetSerial(const gl::ImageIndex &index) = 0;
+
+  protected:
+    void setImage(const gl::PixelUnpackState &unpack, GLenum type, const void *pixels, Image *image);
+    bool subImage(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                  GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels, const gl::ImageIndex &index);
+    void setCompressedImage(GLsizei imageSize, const void *pixels, Image *image);
+    bool subImageCompressed(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                            GLenum format, GLsizei imageSize, const void *pixels, Image *image);
+    bool isFastUnpackable(const gl::PixelUnpackState &unpack, GLenum sizedInternalFormat);
+    bool fastUnpackPixels(const gl::PixelUnpackState &unpack, const void *pixels, const gl::Box &destArea,
+                          GLenum sizedInternalFormat, GLenum type, RenderTarget *destRenderTarget);
+
+    GLint creationLevels(GLsizei width, GLsizei height, GLsizei depth) const;
+    int mipLevels() const;
+
+    Renderer *mRenderer;
+
+    GLenum mUsage;
+
+    bool mDirtyImages;
+
+    bool mImmutable;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureD3D);
+
+    virtual void initializeStorage(bool renderTarget) = 0;
+
+    virtual void updateStorage() = 0;
+    virtual TextureStorage *getBaseLevelStorage() = 0;
+    virtual const ImageD3D *getBaseLevelImage() const = 0;
+};
+
+class TextureD3D_2D : public TextureD3D
+{
+  public:
+    TextureD3D_2D(Renderer *renderer);
+    virtual ~TextureD3D_2D();
+
+    virtual Image *getImage(int level, int layer) const;
+    virtual Image *getImage(const gl::ImageIndex &index) const;
+    virtual GLsizei getLayerCount(int level) const;
+
+    GLsizei getWidth(GLint level) const;
+    GLsizei getHeight(GLint level) const;
+    GLenum getInternalFormat(GLint level) const;
+    GLenum getActualFormat(GLint level) const;
+    bool isDepth(GLint level) const;
+
+    virtual void setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels);
+    virtual void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels);
+    virtual void copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+
+    virtual void bindTexImage(egl::Surface *surface);
+    virtual void releaseTexImage();
+
+    virtual void generateMipmaps();
+
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+    virtual unsigned int getRenderTargetSerial(const gl::ImageIndex &index);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureD3D_2D);
+
+    virtual void initializeStorage(bool renderTarget);
+    TextureStorage *createCompleteStorage(bool renderTarget) const;
+    void setCompleteTexStorage(TextureStorage *newCompleteTexStorage);
+
+    virtual void updateStorage();
+    bool ensureRenderTarget();
+    virtual TextureStorage *getBaseLevelStorage();
+    virtual const ImageD3D *getBaseLevelImage() const;
+
+    bool isValidLevel(int level) const;
+    bool isLevelComplete(int level) const;
+
+    void updateStorageLevel(int level);
+
+    void redefineImage(GLint level, GLenum internalformat, GLsizei width, GLsizei height);
+    void commitRect(GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+
+    TextureStorage *mTexStorage;
+    ImageD3D *mImageArray[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+};
+
+class TextureD3D_Cube : public TextureD3D
+{
+  public:
+    TextureD3D_Cube(Renderer *renderer);
+    virtual ~TextureD3D_Cube();
+
+    virtual Image *getImage(int level, int layer) const;
+    virtual Image *getImage(const gl::ImageIndex &index) const;
+    virtual GLsizei getLayerCount(int level) const;
+
+    virtual bool hasDirtyImages() const { return mDirtyImages; }
+    virtual void resetDirty() { mDirtyImages = false; }
+    virtual void setUsage(GLenum usage) { mUsage = usage; }
+
+    GLenum getInternalFormat(GLint level, GLint layer) const;
+    bool isDepth(GLint level, GLint layer) const;
+
+    virtual void setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels);
+    virtual void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels);
+    virtual void copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+
+    virtual void bindTexImage(egl::Surface *surface);
+    virtual void releaseTexImage();
+
+    virtual void generateMipmaps();
+
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+    virtual unsigned int getRenderTargetSerial(const gl::ImageIndex &index);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureD3D_Cube);
+
+    virtual void initializeStorage(bool renderTarget);
+    TextureStorage *createCompleteStorage(bool renderTarget) const;
+    void setCompleteTexStorage(TextureStorage *newCompleteTexStorage);
+
+    virtual void updateStorage();
+    bool ensureRenderTarget();
+    virtual TextureStorage *getBaseLevelStorage();
+    virtual const ImageD3D *getBaseLevelImage() const;
+
+    bool isValidFaceLevel(int faceIndex, int level) const;
+    bool isFaceLevelComplete(int faceIndex, int level) const;
+    bool isCubeComplete() const;
+    void updateStorageFaceLevel(int faceIndex, int level);
+
+    void redefineImage(int faceIndex, GLint level, GLenum internalformat, GLsizei width, GLsizei height);
+    void commitRect(int faceIndex, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+
+    ImageD3D *mImageArray[6][gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    TextureStorage *mTexStorage;
+};
+
+class TextureD3D_3D : public TextureD3D
+{
+  public:
+    TextureD3D_3D(Renderer *renderer);
+    virtual ~TextureD3D_3D();
+
+    virtual Image *getImage(int level, int layer) const;
+    virtual Image *getImage(const gl::ImageIndex &index) const;
+    virtual GLsizei getLayerCount(int level) const;
+
+    GLsizei getWidth(GLint level) const;
+    GLsizei getHeight(GLint level) const;
+    GLsizei getDepth(GLint level) const;
+    GLenum getInternalFormat(GLint level) const;
+    bool isDepth(GLint level) const;
+
+    virtual void setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels);
+    virtual void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels);
+    virtual void copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+
+    virtual void bindTexImage(egl::Surface *surface);
+    virtual void releaseTexImage();
+
+    virtual void generateMipmaps();
+
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+    virtual unsigned int getRenderTargetSerial(const gl::ImageIndex &index);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureD3D_3D);
+
+    virtual void initializeStorage(bool renderTarget);
+    TextureStorage *createCompleteStorage(bool renderTarget) const;
+    void setCompleteTexStorage(TextureStorage *newCompleteTexStorage);
+
+    virtual void updateStorage();
+    bool ensureRenderTarget();
+    virtual TextureStorage *getBaseLevelStorage();
+    virtual const ImageD3D *getBaseLevelImage() const;
+
+    bool isValidLevel(int level) const;
+    bool isLevelComplete(int level) const;
+    void updateStorageLevel(int level);
+
+    void redefineImage(GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+    void commitRect(GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
+
+    ImageD3D *mImageArray[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    TextureStorage *mTexStorage;
+};
+
+class TextureD3D_2DArray : public TextureD3D
+{
+  public:
+    TextureD3D_2DArray(Renderer *renderer);
+    virtual ~TextureD3D_2DArray();
+
+    virtual Image *getImage(int level, int layer) const;
+    virtual Image *getImage(const gl::ImageIndex &index) const;
+    virtual GLsizei getLayerCount(int level) const;
+
+    GLsizei getWidth(GLint level) const;
+    GLsizei getHeight(GLint level) const;
+    GLsizei getLayers(GLint level) const;
+    GLenum getInternalFormat(GLint level) const;
+    bool isDepth(GLint level) const;
+
+    virtual void setImage(GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth, GLenum internalFormat, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void setCompressedImage(GLenum target, GLint level, GLenum format, GLsizei width, GLsizei height, GLsizei depth, GLsizei imageSize, const void *pixels);
+    virtual void subImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const gl::PixelUnpackState &unpack, const void *pixels);
+    virtual void subImageCompressed(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *pixels);
+    virtual void copyImage(GLenum target, GLint level, GLenum format, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void copySubImage(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+    virtual void storage(GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+
+    virtual void bindTexImage(egl::Surface *surface);
+    virtual void releaseTexImage();
+
+    virtual void generateMipmaps();
+
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+    virtual unsigned int getRenderTargetSerial(const gl::ImageIndex &index);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureD3D_2DArray);
+
+    virtual void initializeStorage(bool renderTarget);
+    TextureStorage *createCompleteStorage(bool renderTarget) const;
+    void setCompleteTexStorage(TextureStorage *newCompleteTexStorage);
+
+    virtual void updateStorage();
+    bool ensureRenderTarget();
+    virtual TextureStorage *getBaseLevelStorage();
+    virtual const ImageD3D *getBaseLevelImage() const;
+
+    bool isValidLevel(int level) const;
+    bool isLevelComplete(int level) const;
+    void updateStorageLevel(int level);
+
+    void deleteImages();
+    void redefineImage(GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+    void commitRect(GLint level, GLint xoffset, GLint yoffset, GLint layerTarget, GLsizei width, GLsizei height);
+
+    // Storing images as an array of single depth textures since D3D11 treats each array level of a
+    // Texture2D object as a separate subresource.  Each layer would have to be looped over
+    // to update all the texture layers since they cannot all be updated at once and it makes the most
+    // sense for the Image class to not have to worry about layer subresource as well as mip subresources.
+    GLsizei mLayerCounts[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+    ImageD3D **mImageArray[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    TextureStorage *mTexStorage;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_TEXTURED3D_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureStorage.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureStorage.cpp
new file mode 100644
index 0000000000..dedd266c09
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureStorage.cpp
@@ -0,0 +1,51 @@
+//
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureStorage.cpp: Shared members of abstract rx::TextureStorage class.
+
+#include "libGLESv2/renderer/d3d/TextureStorage.h"
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/Texture.h"
+
+#include "common/debug.h"
+#include "common/mathutil.h"
+
+namespace rx
+{
+
+unsigned int TextureStorage::mCurrentTextureSerial = 1;
+
+TextureStorage::TextureStorage()
+    : mTextureSerial(issueTextureSerial()),
+      mFirstRenderTargetSerial(0),
+      mRenderTargetSerialsLayerStride(0)
+{}
+
+void TextureStorage::initializeSerials(unsigned int rtSerialsToReserve, unsigned int rtSerialsLayerStride)
+{
+    mFirstRenderTargetSerial = gl::RenderbufferStorage::issueSerials(rtSerialsToReserve);
+    mRenderTargetSerialsLayerStride = rtSerialsLayerStride;
+}
+
+unsigned int TextureStorage::getRenderTargetSerial(const gl::ImageIndex &index) const
+{
+    unsigned int layerOffset = (index.hasLayer() ? (static_cast<unsigned int>(index.layerIndex) * mRenderTargetSerialsLayerStride) : 0);
+    return mFirstRenderTargetSerial + static_cast<unsigned int>(index.mipIndex) + layerOffset;
+}
+
+unsigned int TextureStorage::getTextureSerial() const
+{
+    return mTextureSerial;
+}
+
+unsigned int TextureStorage::issueTextureSerial()
+{
+    return mCurrentTextureSerial++;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureStorage.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureStorage.h
new file mode 100644
index 0000000000..9cc2c2977b
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureStorage.h
@@ -0,0 +1,61 @@
+//
+// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureStorage.h: Defines the abstract rx::TextureStorage class.
+
+#ifndef LIBGLESV2_RENDERER_TEXTURESTORAGE_H_
+#define LIBGLESV2_RENDERER_TEXTURESTORAGE_H_
+
+#include "common/debug.h"
+
+#include <GLES2/gl2.h>
+
+namespace gl
+{
+struct ImageIndex;
+}
+
+namespace rx
+{
+class Renderer;
+class SwapChain;
+class RenderTarget;
+
+class TextureStorage
+{
+  public:
+    TextureStorage();
+    virtual ~TextureStorage() {};
+
+    virtual int getTopLevel() const = 0;
+    virtual bool isRenderTarget() const = 0;
+    virtual bool isManaged() const = 0;
+    virtual int getLevelCount() const = 0;
+
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index) = 0;
+    virtual void generateMipmaps() = 0;
+
+    unsigned int getRenderTargetSerial(const gl::ImageIndex &index) const;
+    unsigned int getTextureSerial() const;
+
+  protected:
+    void initializeSerials(unsigned int rtSerialsToReserve, unsigned int rtSerialsLayerStride);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureStorage);
+
+    const unsigned int mTextureSerial;
+    static unsigned int issueTextureSerial();
+
+    static unsigned int mCurrentTextureSerial;
+
+    unsigned int mFirstRenderTargetSerial;
+    unsigned int mRenderTargetSerialsLayerStride;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_TEXTURESTORAGE_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.cpp
new file mode 100644
index 0000000000..11596006d0
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.cpp
@@ -0,0 +1,38 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TransformFeedbackD3D.cpp is a no-op implementation for both the D3D9 and D3D11 renderers.
+
+#include "libGLESv2/renderer/d3d/TransformFeedbackD3D.h"
+
+namespace rx
+{
+
+TransformFeedbackD3D::TransformFeedbackD3D()
+{
+}
+
+TransformFeedbackD3D::~TransformFeedbackD3D()
+{
+}
+
+void TransformFeedbackD3D::begin(GLenum primitiveMode)
+{
+}
+
+void TransformFeedbackD3D::end()
+{
+}
+
+void TransformFeedbackD3D::pause()
+{
+}
+
+void TransformFeedbackD3D::resume()
+{
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.h
new file mode 100644
index 0000000000..7c367aba1d
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.h
@@ -0,0 +1,32 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TransformFeedbackD3D.h: Implements the abstract rx::TransformFeedbackImpl class.
+
+#ifndef LIBGLESV2_RENDERER_D3D_TRANSFORMFEEDBACKD3D_H_
+#define LIBGLESV2_RENDERER_D3D_TRANSFORMFEEDBACKD3D_H_
+
+#include "libGLESv2/renderer/TransformFeedbackImpl.h"
+#include "libGLESv2/angletypes.h"
+
+namespace rx
+{
+
+class TransformFeedbackD3D : public TransformFeedbackImpl
+{
+  public:
+    TransformFeedbackD3D();
+    virtual ~TransformFeedbackD3D();
+
+    virtual void begin(GLenum primitiveMode);
+    virtual void end();
+    virtual void pause();
+    virtual void resume();
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_D3D_TRANSFORMFEEDBACKD3D_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexBuffer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexBuffer.cpp
new file mode 100644
index 0000000000..4f85eb94fa
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexBuffer.cpp
@@ -0,0 +1,307 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexBuffer.cpp: Defines the abstract VertexBuffer class and VertexBufferInterface
+// class with derivations, classes that perform graphics API agnostic vertex buffer operations.
+
+#include "libGLESv2/renderer/d3d/VertexBuffer.h"
+#include "libGLESv2/renderer/d3d/BufferD3D.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/VertexAttribute.h"
+
+#include "common/mathutil.h"
+
+namespace rx
+{
+
+unsigned int VertexBuffer::mNextSerial = 1;
+
+VertexBuffer::VertexBuffer()
+{
+    updateSerial();
+}
+
+VertexBuffer::~VertexBuffer()
+{
+}
+
+void VertexBuffer::updateSerial()
+{
+    mSerial = mNextSerial++;
+}
+
+unsigned int VertexBuffer::getSerial() const
+{
+    return mSerial;
+}
+
+VertexBufferInterface::VertexBufferInterface(rx::Renderer *renderer, bool dynamic) : mRenderer(renderer)
+{
+    mDynamic = dynamic;
+    mWritePosition = 0;
+    mReservedSpace = 0;
+
+    mVertexBuffer = renderer->createVertexBuffer();
+}
+
+VertexBufferInterface::~VertexBufferInterface()
+{
+    delete mVertexBuffer;
+}
+
+unsigned int VertexBufferInterface::getSerial() const
+{
+    return mVertexBuffer->getSerial();
+}
+
+unsigned int VertexBufferInterface::getBufferSize() const
+{
+    return mVertexBuffer->getBufferSize();
+}
+
+gl::Error VertexBufferInterface::setBufferSize(unsigned int size)
+{
+    if (mVertexBuffer->getBufferSize() == 0)
+    {
+        return mVertexBuffer->initialize(size, mDynamic);
+    }
+    else
+    {
+        return mVertexBuffer->setBufferSize(size);
+    }
+}
+
+unsigned int VertexBufferInterface::getWritePosition() const
+{
+    return mWritePosition;
+}
+
+void VertexBufferInterface::setWritePosition(unsigned int writePosition)
+{
+    mWritePosition = writePosition;
+}
+
+gl::Error VertexBufferInterface::discard()
+{
+    return mVertexBuffer->discard();
+}
+
+gl::Error VertexBufferInterface::storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                                       GLint start, GLsizei count, GLsizei instances, unsigned int *outStreamOffset)
+{
+    gl::Error error(GL_NO_ERROR);
+
+    unsigned int spaceRequired;
+    error = mVertexBuffer->getSpaceRequired(attrib, count, instances, &spaceRequired);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    if (mWritePosition + spaceRequired < mWritePosition)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal error, new vertex buffer write position would overflow.");
+    }
+
+    error = reserveSpace(mReservedSpace);
+    if (error.isError())
+    {
+        return error;
+    }
+    mReservedSpace = 0;
+
+    error = mVertexBuffer->storeVertexAttributes(attrib, currentValue, start, count, instances, mWritePosition);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    if (outStreamOffset)
+    {
+        *outStreamOffset = mWritePosition;
+    }
+
+    mWritePosition += spaceRequired;
+
+    // Align to 16-byte boundary
+    mWritePosition = rx::roundUp(mWritePosition, 16u);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error VertexBufferInterface::reserveVertexSpace(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances)
+{
+    gl::Error error(GL_NO_ERROR);
+
+    unsigned int requiredSpace;
+    error = mVertexBuffer->getSpaceRequired(attrib, count, instances, &requiredSpace);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    // Protect against integer overflow
+    if (mReservedSpace + requiredSpace < mReservedSpace)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Unable to reserve %u extra bytes in internal vertex buffer, "
+                         "it would result in an overflow.", requiredSpace);
+    }
+
+    mReservedSpace += requiredSpace;
+
+    // Align to 16-byte boundary
+    mReservedSpace = rx::roundUp(mReservedSpace, 16u);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+VertexBuffer* VertexBufferInterface::getVertexBuffer() const
+{
+    return mVertexBuffer;
+}
+
+bool VertexBufferInterface::directStoragePossible(const gl::VertexAttribute &attrib,
+                                                  const gl::VertexAttribCurrentValueData &currentValue) const
+{
+    gl::Buffer *buffer = attrib.buffer.get();
+    BufferD3D *storage = buffer ? BufferD3D::makeBufferD3D(buffer->getImplementation()) : NULL;
+
+    if (!storage || !storage->supportsDirectBinding())
+    {
+        return false;
+    }
+
+    // Alignment restrictions: In D3D, vertex data must be aligned to
+    //  the format stride, or to a 4-byte boundary, whichever is smaller.
+    //  (Undocumented, and experimentally confirmed)
+    size_t alignment = 4;
+    bool requiresConversion = false;
+
+    if (attrib.type != GL_FLOAT)
+    {
+        gl::VertexFormat vertexFormat(attrib, currentValue.Type);
+
+        unsigned int outputElementSize;
+        getVertexBuffer()->getSpaceRequired(attrib, 1, 0, &outputElementSize);
+        alignment = std::min<size_t>(outputElementSize, 4);
+
+        requiresConversion = (mRenderer->getVertexConversionType(vertexFormat) & VERTEX_CONVERT_CPU) != 0;
+    }
+
+    bool isAligned = (static_cast<size_t>(ComputeVertexAttributeStride(attrib)) % alignment == 0) &&
+                     (static_cast<size_t>(attrib.offset) % alignment == 0);
+
+    return !requiresConversion && isAligned;
+}
+
+StreamingVertexBufferInterface::StreamingVertexBufferInterface(rx::Renderer *renderer, std::size_t initialSize) : VertexBufferInterface(renderer, true)
+{
+    setBufferSize(initialSize);
+}
+
+StreamingVertexBufferInterface::~StreamingVertexBufferInterface()
+{
+}
+
+gl::Error StreamingVertexBufferInterface::reserveSpace(unsigned int size)
+{
+    unsigned int curBufferSize = getBufferSize();
+    if (size > curBufferSize)
+    {
+        gl::Error error = setBufferSize(std::max(size, 3 * curBufferSize / 2));
+        if (error.isError())
+        {
+            return error;
+        }
+        setWritePosition(0);
+    }
+    else if (getWritePosition() + size > curBufferSize)
+    {
+        gl::Error error = discard();
+        if (error.isError())
+        {
+            return error;
+        }
+        setWritePosition(0);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+StaticVertexBufferInterface::StaticVertexBufferInterface(rx::Renderer *renderer) : VertexBufferInterface(renderer, false)
+{
+}
+
+StaticVertexBufferInterface::~StaticVertexBufferInterface()
+{
+}
+
+bool StaticVertexBufferInterface::lookupAttribute(const gl::VertexAttribute &attrib, unsigned int *outStreamOffset)
+{
+    for (unsigned int element = 0; element < mCache.size(); element++)
+    {
+        if (mCache[element].type == attrib.type &&
+            mCache[element].size == attrib.size &&
+            mCache[element].stride == ComputeVertexAttributeStride(attrib) &&
+            mCache[element].normalized == attrib.normalized &&
+            mCache[element].pureInteger == attrib.pureInteger)
+        {
+            size_t offset = (static_cast<size_t>(attrib.offset) % ComputeVertexAttributeStride(attrib));
+            if (mCache[element].attributeOffset == offset)
+            {
+                if (outStreamOffset)
+                {
+                    *outStreamOffset = mCache[element].streamOffset;
+                }
+                return true;
+            }
+        }
+    }
+
+    return false;
+}
+
+gl::Error StaticVertexBufferInterface::reserveSpace(unsigned int size)
+{
+    unsigned int curSize = getBufferSize();
+    if (curSize == 0)
+    {
+        return setBufferSize(size);
+    }
+    else if (curSize >= size)
+    {
+        return gl::Error(GL_NO_ERROR);
+    }
+    else
+    {
+        UNREACHABLE();
+        return gl::Error(GL_INVALID_OPERATION, "Internal error, Static vertex buffers can't be resized.");
+    }
+}
+
+gl::Error StaticVertexBufferInterface::storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                                             GLint start, GLsizei count, GLsizei instances, unsigned int *outStreamOffset)
+{
+    unsigned int streamOffset;
+    gl::Error error = VertexBufferInterface::storeVertexAttributes(attrib, currentValue, start, count, instances, &streamOffset);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    size_t attributeOffset = static_cast<size_t>(attrib.offset) % ComputeVertexAttributeStride(attrib);
+    VertexElement element = { attrib.type, attrib.size, ComputeVertexAttributeStride(attrib), attrib.normalized, attrib.pureInteger, attributeOffset, streamOffset };
+    mCache.push_back(element);
+
+    if (outStreamOffset)
+    {
+        *outStreamOffset = streamOffset;
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/VertexBuffer.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexBuffer.h
index cbafdd20f6..fa747d9cb4 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/VertexBuffer.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexBuffer.h
@@ -11,10 +11,17 @@
 #define LIBGLESV2_RENDERER_VERTEXBUFFER_H_
 
 #include "common/angleutils.h"
+#include "libGLESv2/Error.h"
+
+#include <GLES2/gl2.h>
+
+#include <cstddef>
+#include <vector>
 
 namespace gl
 {
-class VertexAttribute;
+struct VertexAttribute;
+struct VertexAttribCurrentValueData;
 }
 
 namespace rx
@@ -27,20 +34,16 @@ class VertexBuffer
     VertexBuffer();
     virtual ~VertexBuffer();
 
-    virtual bool initialize(unsigned int size, bool dynamicUsage) = 0;
-
-    virtual bool storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count,
-                                       GLsizei instances, unsigned int offset) = 0;
-    virtual bool storeRawData(const void* data, unsigned int size, unsigned int offset) = 0;
+    virtual gl::Error initialize(unsigned int size, bool dynamicUsage) = 0;
 
-    virtual bool getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances,
-                                  unsigned int *outSpaceRequired) const = 0;
-
-    virtual bool requiresConversion(const gl::VertexAttribute &attrib) const = 0;
+    virtual gl::Error storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                            GLint start, GLsizei count, GLsizei instances, unsigned int offset) = 0;
+    virtual gl::Error getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances,
+                                       unsigned int *outSpaceRequired) const = 0;
 
     virtual unsigned int getBufferSize() const = 0;
-    virtual bool setBufferSize(unsigned int size) = 0;
-    virtual bool discard() = 0;
+    virtual gl::Error setBufferSize(unsigned int size) = 0;
+    virtual gl::Error discard() = 0;
 
     unsigned int getSerial() const;
 
@@ -60,28 +63,29 @@ class VertexBufferInterface
     VertexBufferInterface(rx::Renderer *renderer, bool dynamic);
     virtual ~VertexBufferInterface();
 
-    bool reserveVertexSpace(const gl::VertexAttribute &attribute, GLsizei count, GLsizei instances);
-    bool reserveRawDataSpace(unsigned int size);
+    gl::Error reserveVertexSpace(const gl::VertexAttribute &attribute, GLsizei count, GLsizei instances);
 
     unsigned int getBufferSize() const;
 
     unsigned int getSerial() const;
 
-    virtual bool storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count, GLsizei instances,
-                                      unsigned int *outStreamOffset);
-    virtual bool storeRawData(const void* data, unsigned int size, unsigned int *outStreamOffset);
+    virtual gl::Error storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                            GLint start, GLsizei count, GLsizei instances, unsigned int *outStreamOffset);
+
+    bool directStoragePossible(const gl::VertexAttribute &attrib,
+                               const gl::VertexAttribCurrentValueData &currentValue) const;
 
     VertexBuffer* getVertexBuffer() const;
 
   protected:
-    virtual bool reserveSpace(unsigned int size) = 0;
+    virtual gl::Error reserveSpace(unsigned int size) = 0;
 
     unsigned int getWritePosition() const;
     void setWritePosition(unsigned int writePosition);
 
-    bool discard();
+    gl::Error discard();
 
-    bool setBufferSize(unsigned int size);
+    gl::Error setBufferSize(unsigned int size);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(VertexBufferInterface);
@@ -102,7 +106,7 @@ class StreamingVertexBufferInterface : public VertexBufferInterface
     ~StreamingVertexBufferInterface();
 
   protected:
-    bool reserveSpace(unsigned int size);
+    gl::Error reserveSpace(unsigned int size);
 };
 
 class StaticVertexBufferInterface : public VertexBufferInterface
@@ -111,22 +115,23 @@ class StaticVertexBufferInterface : public VertexBufferInterface
     explicit StaticVertexBufferInterface(rx::Renderer *renderer);
     ~StaticVertexBufferInterface();
 
-    bool storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count, GLsizei instances,
-                               unsigned int *outStreamOffset);
+    gl::Error storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                    GLint start, GLsizei count, GLsizei instances, unsigned int *outStreamOffset);
 
-    bool lookupAttribute(const gl::VertexAttribute &attribute, unsigned int* outStreamOffset);
+    bool lookupAttribute(const gl::VertexAttribute &attribute, unsigned int* outStreamFffset);
 
   protected:
-    bool reserveSpace(unsigned int size);
+    gl::Error reserveSpace(unsigned int size);
 
   private:
     struct VertexElement
     {
         GLenum type;
-        GLint size;
-        GLsizei stride;
+        GLuint size;
+        GLuint stride;
         bool normalized;
-        int attributeOffset;
+        bool pureInteger;
+        size_t attributeOffset;
 
         unsigned int streamOffset;
     };
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexDataManager.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexDataManager.cpp
new file mode 100644
index 0000000000..7034b78eab
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexDataManager.cpp
@@ -0,0 +1,348 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexDataManager.h: Defines the VertexDataManager, a class that
+// runs the Buffer translation process.
+
+#include "libGLESv2/renderer/d3d/VertexDataManager.h"
+#include "libGLESv2/renderer/d3d/BufferD3D.h"
+#include "libGLESv2/renderer/d3d/VertexBuffer.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/VertexAttribute.h"
+
+namespace
+{
+    enum { INITIAL_STREAM_BUFFER_SIZE = 1024*1024 };
+    // This has to be at least 4k or else it fails on ATI cards.
+    enum { CONSTANT_VERTEX_BUFFER_SIZE = 4096 };
+}
+
+namespace rx
+{
+
+static int ElementsInBuffer(const gl::VertexAttribute &attrib, unsigned int size)
+{
+    // Size cannot be larger than a GLsizei
+    if (size > static_cast<unsigned int>(std::numeric_limits<int>::max()))
+    {
+        size = static_cast<unsigned int>(std::numeric_limits<int>::max());
+    }
+
+    GLsizei stride = ComputeVertexAttributeStride(attrib);
+    return (size - attrib.offset % stride + (stride - ComputeVertexAttributeTypeSize(attrib))) / stride;
+}
+
+static int StreamingBufferElementCount(const gl::VertexAttribute &attrib, int vertexDrawCount, int instanceDrawCount)
+{
+    // For instanced rendering, we draw "instanceDrawCount" sets of "vertexDrawCount" vertices.
+    //
+    // A vertex attribute with a positive divisor loads one instanced vertex for every set of
+    // non-instanced vertices, and the instanced vertex index advances once every "mDivisor" instances.
+    if (instanceDrawCount > 0 && attrib.divisor > 0)
+    {
+        return instanceDrawCount / attrib.divisor;
+    }
+
+    return vertexDrawCount;
+}
+
+VertexDataManager::VertexDataManager(Renderer *renderer) : mRenderer(renderer)
+{
+    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
+    {
+        mCurrentValue[i].FloatValues[0] = std::numeric_limits<float>::quiet_NaN();
+        mCurrentValue[i].FloatValues[1] = std::numeric_limits<float>::quiet_NaN();
+        mCurrentValue[i].FloatValues[2] = std::numeric_limits<float>::quiet_NaN();
+        mCurrentValue[i].FloatValues[3] = std::numeric_limits<float>::quiet_NaN();
+        mCurrentValue[i].Type = GL_FLOAT;
+        mCurrentValueBuffer[i] = NULL;
+        mCurrentValueOffsets[i] = 0;
+    }
+
+    mStreamingBuffer = new StreamingVertexBufferInterface(renderer, INITIAL_STREAM_BUFFER_SIZE);
+
+    if (!mStreamingBuffer)
+    {
+        ERR("Failed to allocate the streaming vertex buffer.");
+    }
+}
+
+VertexDataManager::~VertexDataManager()
+{
+    delete mStreamingBuffer;
+
+    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
+    {
+        delete mCurrentValueBuffer[i];
+    }
+}
+
+gl::Error VertexDataManager::prepareVertexData(const gl::VertexAttribute attribs[], const gl::VertexAttribCurrentValueData currentValues[],
+                                               gl::ProgramBinary *programBinary, GLint start, GLsizei count, TranslatedAttribute *translated, GLsizei instances)
+{
+    if (!mStreamingBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal streaming vertex buffer is unexpectedly NULL.");
+    }
+
+    // Invalidate static buffers that don't contain matching attributes
+    for (int attributeIndex = 0; attributeIndex < gl::MAX_VERTEX_ATTRIBS; attributeIndex++)
+    {
+        translated[attributeIndex].active = (programBinary->getSemanticIndex(attributeIndex) != -1);
+
+        if (translated[attributeIndex].active && attribs[attributeIndex].enabled)
+        {
+            invalidateMatchingStaticData(attribs[attributeIndex], currentValues[attributeIndex]);
+        }
+    }
+
+    // Reserve the required space in the buffers
+    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
+    {
+        if (translated[i].active && attribs[i].enabled)
+        {
+            gl::Error error = reserveSpaceForAttrib(attribs[i], currentValues[i], count, instances);
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+    }
+
+    // Perform the vertex data translations
+    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
+    {
+        if (translated[i].active)
+        {
+            if (attribs[i].enabled)
+            {
+                gl::Error error = storeAttribute(attribs[i], currentValues[i], &translated[i],
+                                                 start, count, instances);
+                if (error.isError())
+                {
+                    return error;
+                }
+            }
+            else
+            {
+                if (!mCurrentValueBuffer[i])
+                {
+                    mCurrentValueBuffer[i] = new StreamingVertexBufferInterface(mRenderer, CONSTANT_VERTEX_BUFFER_SIZE);
+                }
+
+                gl::Error error = storeCurrentValue(attribs[i], currentValues[i], &translated[i],
+                                                    &mCurrentValue[i], &mCurrentValueOffsets[i],
+                                                    mCurrentValueBuffer[i]);
+                if (error.isError())
+                {
+                    return error;
+                }
+            }
+        }
+    }
+
+    for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
+    {
+        if (translated[i].active && attribs[i].enabled)
+        {
+            gl::Buffer *buffer = attribs[i].buffer.get();
+
+            if (buffer)
+            {
+                BufferD3D *bufferImpl = BufferD3D::makeBufferD3D(buffer->getImplementation());
+                bufferImpl->promoteStaticUsage(count * ComputeVertexAttributeTypeSize(attribs[i]));
+            }
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void VertexDataManager::invalidateMatchingStaticData(const gl::VertexAttribute &attrib,
+                                                     const gl::VertexAttribCurrentValueData &currentValue) const
+{
+    gl::Buffer *buffer = attrib.buffer.get();
+
+    if (buffer)
+    {
+        BufferD3D *bufferImpl = BufferD3D::makeBufferD3D(buffer->getImplementation());
+        StaticVertexBufferInterface *staticBuffer = bufferImpl->getStaticVertexBuffer();
+
+        if (staticBuffer &&
+            staticBuffer->getBufferSize() > 0 &&
+            !staticBuffer->lookupAttribute(attrib, NULL) &&
+            !staticBuffer->directStoragePossible(attrib, currentValue))
+        {
+            bufferImpl->invalidateStaticData();
+        }
+    }
+}
+
+gl::Error VertexDataManager::reserveSpaceForAttrib(const gl::VertexAttribute &attrib,
+                                                   const gl::VertexAttribCurrentValueData &currentValue,
+                                                   GLsizei count,
+                                                   GLsizei instances) const
+{
+    gl::Buffer *buffer = attrib.buffer.get();
+    BufferD3D *bufferImpl = buffer ? BufferD3D::makeBufferD3D(buffer->getImplementation()) : NULL;
+    StaticVertexBufferInterface *staticBuffer = bufferImpl ? bufferImpl->getStaticVertexBuffer() : NULL;
+    VertexBufferInterface *vertexBuffer = staticBuffer ? staticBuffer : static_cast<VertexBufferInterface*>(mStreamingBuffer);
+
+    if (!vertexBuffer->directStoragePossible(attrib, currentValue))
+    {
+        if (staticBuffer)
+        {
+            if (staticBuffer->getBufferSize() == 0)
+            {
+                int totalCount = ElementsInBuffer(attrib, bufferImpl->getSize());
+                gl::Error error = staticBuffer->reserveVertexSpace(attrib, totalCount, 0);
+                if (error.isError())
+                {
+                    return error;
+                }
+            }
+        }
+        else
+        {
+            int totalCount = StreamingBufferElementCount(attrib, count, instances);
+            ASSERT(!bufferImpl || ElementsInBuffer(attrib, bufferImpl->getSize()) >= totalCount);
+
+            gl::Error error = mStreamingBuffer->reserveVertexSpace(attrib, totalCount, instances);
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error VertexDataManager::storeAttribute(const gl::VertexAttribute &attrib,
+                                            const gl::VertexAttribCurrentValueData &currentValue,
+                                            TranslatedAttribute *translated,
+                                            GLint start,
+                                            GLsizei count,
+                                            GLsizei instances)
+{
+    gl::Buffer *buffer = attrib.buffer.get();
+    ASSERT(buffer || attrib.pointer);
+
+    BufferD3D *storage = buffer ? BufferD3D::makeBufferD3D(buffer->getImplementation()) : NULL;
+    StaticVertexBufferInterface *staticBuffer = storage ? storage->getStaticVertexBuffer() : NULL;
+    VertexBufferInterface *vertexBuffer = staticBuffer ? staticBuffer : static_cast<VertexBufferInterface*>(mStreamingBuffer);
+    bool directStorage = vertexBuffer->directStoragePossible(attrib, currentValue);
+
+    unsigned int streamOffset = 0;
+    unsigned int outputElementSize = 0;
+
+    if (directStorage)
+    {
+        outputElementSize = ComputeVertexAttributeStride(attrib);
+        streamOffset = attrib.offset + outputElementSize * start;
+    }
+    else if (staticBuffer)
+    {
+        gl::Error error = staticBuffer->getVertexBuffer()->getSpaceRequired(attrib, 1, 0, &outputElementSize);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        if (!staticBuffer->lookupAttribute(attrib, &streamOffset))
+        {
+            // Convert the entire buffer
+            int totalCount = ElementsInBuffer(attrib, storage->getSize());
+            int startIndex = attrib.offset / ComputeVertexAttributeStride(attrib);
+
+            gl::Error error = staticBuffer->storeVertexAttributes(attrib, currentValue, -startIndex, totalCount,
+                                                                  0, &streamOffset);
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+
+        unsigned int firstElementOffset = (attrib.offset / ComputeVertexAttributeStride(attrib)) * outputElementSize;
+        unsigned int startOffset = (instances == 0 || attrib.divisor == 0) ? start * outputElementSize : 0;
+        if (streamOffset + firstElementOffset + startOffset < streamOffset)
+        {
+            return gl::Error(GL_OUT_OF_MEMORY);
+        }
+
+        streamOffset += firstElementOffset + startOffset;
+    }
+    else
+    {
+        int totalCount = StreamingBufferElementCount(attrib, count, instances);
+        gl::Error error = mStreamingBuffer->getVertexBuffer()->getSpaceRequired(attrib, 1, 0, &outputElementSize);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        error = mStreamingBuffer->storeVertexAttributes(attrib, currentValue, start, totalCount, instances, &streamOffset);
+        if (error.isError())
+        {
+            return error;
+        }
+    }
+
+    translated->storage = directStorage ? storage : NULL;
+    translated->vertexBuffer = vertexBuffer->getVertexBuffer();
+    translated->serial = directStorage ? storage->getSerial() : vertexBuffer->getSerial();
+    translated->divisor = attrib.divisor;
+
+    translated->attribute = &attrib;
+    translated->currentValueType = currentValue.Type;
+    translated->stride = outputElementSize;
+    translated->offset = streamOffset;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error VertexDataManager::storeCurrentValue(const gl::VertexAttribute &attrib,
+                                               const gl::VertexAttribCurrentValueData &currentValue,
+                                               TranslatedAttribute *translated,
+                                               gl::VertexAttribCurrentValueData *cachedValue,
+                                               size_t *cachedOffset,
+                                               StreamingVertexBufferInterface *buffer)
+{
+    if (*cachedValue != currentValue)
+    {
+        gl::Error error = buffer->reserveVertexSpace(attrib, 1, 0);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        unsigned int streamOffset;
+        error = buffer->storeVertexAttributes(attrib, currentValue, 0, 1, 0, &streamOffset);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        *cachedValue = currentValue;
+        *cachedOffset = streamOffset;
+    }
+
+    translated->storage = NULL;
+    translated->vertexBuffer = buffer->getVertexBuffer();
+    translated->serial = buffer->getSerial();
+    translated->divisor = 0;
+
+    translated->attribute = &attrib;
+    translated->currentValueType = currentValue.Type;
+    translated->stride = 0;
+    translated->offset = *cachedOffset;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexDataManager.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexDataManager.h
new file mode 100644
index 0000000000..7728722246
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/VertexDataManager.h
@@ -0,0 +1,95 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexDataManager.h: Defines the VertexDataManager, a class that
+// runs the Buffer translation process.
+
+#ifndef LIBGLESV2_RENDERER_VERTEXDATAMANAGER_H_
+#define LIBGLESV2_RENDERER_VERTEXDATAMANAGER_H_
+
+#include "libGLESv2/Constants.h"
+#include "libGLESv2/VertexAttribute.h"
+#include "common/angleutils.h"
+
+namespace gl
+{
+struct VertexAttribute;
+class ProgramBinary;
+struct VertexAttribCurrentValueData;
+}
+
+namespace rx
+{
+class BufferD3D;
+class StreamingVertexBufferInterface;
+class VertexBuffer;
+class Renderer;
+
+struct TranslatedAttribute
+{
+    TranslatedAttribute() : active(false), attribute(NULL), currentValueType(GL_NONE),
+                            offset(0), stride(0), vertexBuffer(NULL), storage(NULL),
+                            serial(0), divisor(0) {};
+    bool active;
+
+    const gl::VertexAttribute *attribute;
+    GLenum currentValueType;
+    unsigned int offset;
+    unsigned int stride;   // 0 means not to advance the read pointer at all
+
+    VertexBuffer *vertexBuffer;
+    BufferD3D *storage;
+    unsigned int serial;
+    unsigned int divisor;
+};
+
+class VertexDataManager
+{
+  public:
+    VertexDataManager(rx::Renderer *renderer);
+    virtual ~VertexDataManager();
+
+    gl::Error prepareVertexData(const gl::VertexAttribute attribs[], const gl::VertexAttribCurrentValueData currentValues[],
+                                gl::ProgramBinary *programBinary, GLint start, GLsizei count, TranslatedAttribute *outAttribs, GLsizei instances);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(VertexDataManager);
+
+    gl::Error reserveSpaceForAttrib(const gl::VertexAttribute &attrib,
+                                    const gl::VertexAttribCurrentValueData &currentValue,
+                                    GLsizei count,
+                                    GLsizei instances) const;
+
+    void invalidateMatchingStaticData(const gl::VertexAttribute &attrib,
+                                      const gl::VertexAttribCurrentValueData &currentValue) const;
+
+    gl::Error storeAttribute(const gl::VertexAttribute &attrib,
+                             const gl::VertexAttribCurrentValueData &currentValue,
+                             TranslatedAttribute *translated,
+                             GLint start,
+                             GLsizei count,
+                             GLsizei instances);
+
+    gl::Error storeCurrentValue(const gl::VertexAttribute &attrib,
+                                const gl::VertexAttribCurrentValueData &currentValue,
+                                TranslatedAttribute *translated,
+                                gl::VertexAttribCurrentValueData *cachedValue,
+                                size_t *cachedOffset,
+                                StreamingVertexBufferInterface *buffer);
+
+    rx::Renderer *const mRenderer;
+
+    StreamingVertexBufferInterface *mStreamingBuffer;
+
+    gl::VertexAttribCurrentValueData mCurrentValue[gl::MAX_VERTEX_ATTRIBS];
+
+    StreamingVertexBufferInterface *mCurrentValueBuffer[gl::MAX_VERTEX_ATTRIBS];
+    std::size_t mCurrentValueOffsets[gl::MAX_VERTEX_ATTRIBS];
+};
+
+}
+
+#endif   // LIBGLESV2_RENDERER_VERTEXDATAMANAGER_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
new file mode 100644
index 0000000000..d43e65ea78
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
@@ -0,0 +1,1049 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Blit11.cpp: Texture copy utility class.
+
+#include "libGLESv2/renderer/d3d/d3d11/Blit11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/formatutils.h"
+
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough2dvs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughdepth2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlum2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlumalpha2dps.h"
+
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough3dvs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough3dgs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3duips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3dips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlum3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlumalpha3dps.h"
+
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlef2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlei2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzleui2dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlef3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlei3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzleui3dps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlef2darrayps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlei2darrayps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzleui2darrayps.h"
+
+namespace rx
+{
+
+static DXGI_FORMAT GetTextureFormat(ID3D11Resource *resource)
+{
+    ID3D11Texture2D *texture = d3d11::DynamicCastComObject<ID3D11Texture2D>(resource);
+    if (!texture)
+    {
+        return DXGI_FORMAT_UNKNOWN;
+    }
+
+    D3D11_TEXTURE2D_DESC desc;
+    texture->GetDesc(&desc);
+
+    SafeRelease(texture);
+
+    return desc.Format;
+}
+
+static ID3D11Resource *CreateStagingTexture(ID3D11Device *device, ID3D11DeviceContext *context,
+                                            ID3D11Resource *source, unsigned int subresource,
+                                            const gl::Extents &size, unsigned int cpuAccessFlags)
+{
+    D3D11_TEXTURE2D_DESC stagingDesc;
+    stagingDesc.Width = size.width;
+    stagingDesc.Height = size.height;
+    stagingDesc.MipLevels = 1;
+    stagingDesc.ArraySize = 1;
+    stagingDesc.Format = GetTextureFormat(source);
+    stagingDesc.SampleDesc.Count = 1;
+    stagingDesc.SampleDesc.Quality = 0;
+    stagingDesc.Usage = D3D11_USAGE_STAGING;
+    stagingDesc.CPUAccessFlags = cpuAccessFlags;
+    stagingDesc.MiscFlags = 0;
+    stagingDesc.BindFlags = 0;
+
+    ID3D11Texture2D *stagingTexture = NULL;
+    HRESULT result = device->CreateTexture2D(&stagingDesc, NULL, &stagingTexture);
+    if (FAILED(result))
+    {
+        ERR("Failed to create staging texture for depth stencil blit. HRESULT: 0x%X.", result);
+        return NULL;
+    }
+
+    context->CopySubresourceRegion(stagingTexture, 0, 0, 0, 0, source, subresource, NULL);
+
+    return stagingTexture;
+}
+
+inline static void GenerateVertexCoords(const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                                        const gl::Box &destArea, const gl::Extents &destSize,
+                                        float *x1, float *y1, float *x2, float *y2,
+                                        float *u1, float *v1, float *u2, float *v2)
+{
+    *x1 = (destArea.x / float(destSize.width)) * 2.0f - 1.0f;
+    *y1 = ((destSize.height - destArea.y - destArea.height) / float(destSize.height)) * 2.0f - 1.0f;
+    *x2 = ((destArea.x + destArea.width) / float(destSize.width)) * 2.0f - 1.0f;
+    *y2 = ((destSize.height - destArea.y) / float(destSize.height)) * 2.0f - 1.0f;
+
+    *u1 = sourceArea.x / float(sourceSize.width);
+    *v1 = sourceArea.y / float(sourceSize.height);
+    *u2 = (sourceArea.x + sourceArea.width) / float(sourceSize.width);
+    *v2 = (sourceArea.y + sourceArea.height) / float(sourceSize.height);
+}
+
+static void Write2DVertices(const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                            const gl::Box &destArea, const gl::Extents &destSize,
+                            void *outVertices, unsigned int *outStride, unsigned int *outVertexCount,
+                            D3D11_PRIMITIVE_TOPOLOGY *outTopology)
+{
+    float x1, y1, x2, y2, u1, v1, u2, v2;
+    GenerateVertexCoords(sourceArea, sourceSize, destArea, destSize, &x1, &y1, &x2, &y2, &u1, &v1, &u2, &v2);
+
+    d3d11::PositionTexCoordVertex *vertices = static_cast<d3d11::PositionTexCoordVertex*>(outVertices);
+
+    d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, u1, v2);
+    d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, u1, v1);
+    d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, u2, v2);
+    d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, u2, v1);
+
+    *outStride = sizeof(d3d11::PositionTexCoordVertex);
+    *outVertexCount = 4;
+    *outTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP;
+}
+
+static void Write3DVertices(const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                            const gl::Box &destArea, const gl::Extents &destSize,
+                            void *outVertices, unsigned int *outStride, unsigned int *outVertexCount,
+                            D3D11_PRIMITIVE_TOPOLOGY *outTopology)
+{
+    ASSERT(sourceSize.depth > 0 && destSize.depth > 0);
+
+    float x1, y1, x2, y2, u1, v1, u2, v2;
+    GenerateVertexCoords(sourceArea, sourceSize, destArea, destSize, &x1, &y1, &x2, &y2, &u1, &v1, &u2, &v2);
+
+    d3d11::PositionLayerTexCoord3DVertex *vertices = static_cast<d3d11::PositionLayerTexCoord3DVertex*>(outVertices);
+
+    for (int i = 0; i < destSize.depth; i++)
+    {
+        float readDepth = (float)i / std::max(destSize.depth - 1, 1);
+
+        d3d11::SetPositionLayerTexCoord3DVertex(&vertices[i * 6 + 0], x1, y1, i, u1, v2, readDepth);
+        d3d11::SetPositionLayerTexCoord3DVertex(&vertices[i * 6 + 1], x1, y2, i, u1, v1, readDepth);
+        d3d11::SetPositionLayerTexCoord3DVertex(&vertices[i * 6 + 2], x2, y1, i, u2, v2, readDepth);
+
+        d3d11::SetPositionLayerTexCoord3DVertex(&vertices[i * 6 + 3], x1, y2, i, u1, v1, readDepth);
+        d3d11::SetPositionLayerTexCoord3DVertex(&vertices[i * 6 + 4], x2, y2, i, u2, v1, readDepth);
+        d3d11::SetPositionLayerTexCoord3DVertex(&vertices[i * 6 + 5], x2, y1, i, u2, v2, readDepth);
+    }
+
+    *outStride = sizeof(d3d11::PositionLayerTexCoord3DVertex);
+    *outVertexCount = destSize.depth * 6;
+    *outTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST;
+}
+
+Blit11::Blit11(rx::Renderer11 *renderer)
+    : mRenderer(renderer), mBlitShaderMap(compareBlitParameters), mSwizzleShaderMap(compareSwizzleParameters),
+      mVertexBuffer(NULL), mPointSampler(NULL), mLinearSampler(NULL), mScissorEnabledRasterizerState(NULL),
+      mScissorDisabledRasterizerState(NULL), mDepthStencilState(NULL),
+      mQuad2DIL(NULL), mQuad2DVS(NULL), mDepthPS(NULL),
+      mQuad3DIL(NULL), mQuad3DVS(NULL), mQuad3DGS(NULL),
+      mSwizzleCB(NULL)
+{
+    HRESULT result;
+    ID3D11Device *device = mRenderer->getDevice();
+
+    D3D11_BUFFER_DESC vbDesc;
+    vbDesc.ByteWidth = std::max(sizeof(d3d11::PositionLayerTexCoord3DVertex), sizeof(d3d11::PositionTexCoordVertex)) *
+                       6 * renderer->getRendererCaps().max3DTextureSize;
+    vbDesc.Usage = D3D11_USAGE_DYNAMIC;
+    vbDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
+    vbDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+    vbDesc.MiscFlags = 0;
+    vbDesc.StructureByteStride = 0;
+
+    result = device->CreateBuffer(&vbDesc, NULL, &mVertexBuffer);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mVertexBuffer, "Blit11 vertex buffer");
+
+    D3D11_SAMPLER_DESC pointSamplerDesc;
+    pointSamplerDesc.Filter = D3D11_FILTER_MIN_MAG_POINT_MIP_LINEAR;
+    pointSamplerDesc.AddressU = D3D11_TEXTURE_ADDRESS_CLAMP;
+    pointSamplerDesc.AddressV = D3D11_TEXTURE_ADDRESS_CLAMP;
+    pointSamplerDesc.AddressW = D3D11_TEXTURE_ADDRESS_CLAMP;
+    pointSamplerDesc.MipLODBias = 0.0f;
+    pointSamplerDesc.MaxAnisotropy = 0;
+    pointSamplerDesc.ComparisonFunc = D3D11_COMPARISON_NEVER;
+    pointSamplerDesc.BorderColor[0] = 0.0f;
+    pointSamplerDesc.BorderColor[1] = 0.0f;
+    pointSamplerDesc.BorderColor[2] = 0.0f;
+    pointSamplerDesc.BorderColor[3] = 0.0f;
+    pointSamplerDesc.MinLOD = 0.0f;
+    pointSamplerDesc.MaxLOD = mRenderer->isLevel9() ? FLT_MAX : 0.0f;
+
+    result = device->CreateSamplerState(&pointSamplerDesc, &mPointSampler);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mPointSampler, "Blit11 point sampler");
+
+    D3D11_SAMPLER_DESC linearSamplerDesc;
+    linearSamplerDesc.Filter = D3D11_FILTER_MIN_MAG_MIP_LINEAR;
+    linearSamplerDesc.AddressU = D3D11_TEXTURE_ADDRESS_CLAMP;
+    linearSamplerDesc.AddressV = D3D11_TEXTURE_ADDRESS_CLAMP;
+    linearSamplerDesc.AddressW = D3D11_TEXTURE_ADDRESS_CLAMP;
+    linearSamplerDesc.MipLODBias = 0.0f;
+    linearSamplerDesc.MaxAnisotropy = 0;
+    linearSamplerDesc.ComparisonFunc = D3D11_COMPARISON_NEVER;
+    linearSamplerDesc.BorderColor[0] = 0.0f;
+    linearSamplerDesc.BorderColor[1] = 0.0f;
+    linearSamplerDesc.BorderColor[2] = 0.0f;
+    linearSamplerDesc.BorderColor[3] = 0.0f;
+    linearSamplerDesc.MinLOD = 0.0f;
+    linearSamplerDesc.MaxLOD = mRenderer->isLevel9() ? FLT_MAX : 0.0f;
+
+    result = device->CreateSamplerState(&linearSamplerDesc, &mLinearSampler);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mLinearSampler, "Blit11 linear sampler");
+
+    // Use a rasterizer state that will not cull so that inverted quads will not be culled
+    D3D11_RASTERIZER_DESC rasterDesc;
+    rasterDesc.FillMode = D3D11_FILL_SOLID;
+    rasterDesc.CullMode = D3D11_CULL_NONE;
+    rasterDesc.FrontCounterClockwise = FALSE;
+    rasterDesc.DepthBias = 0;
+    rasterDesc.SlopeScaledDepthBias = 0.0f;
+    rasterDesc.DepthBiasClamp = 0.0f;
+    rasterDesc.DepthClipEnable = TRUE;
+    rasterDesc.MultisampleEnable = FALSE;
+    rasterDesc.AntialiasedLineEnable = FALSE;
+
+    rasterDesc.ScissorEnable = TRUE;
+    result = device->CreateRasterizerState(&rasterDesc, &mScissorEnabledRasterizerState);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mScissorEnabledRasterizerState, "Blit11 scissoring rasterizer state");
+
+    rasterDesc.ScissorEnable = FALSE;
+    result = device->CreateRasterizerState(&rasterDesc, &mScissorDisabledRasterizerState);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mScissorDisabledRasterizerState, "Blit11 no scissoring rasterizer state");
+
+    D3D11_DEPTH_STENCIL_DESC depthStencilDesc;
+    depthStencilDesc.DepthEnable = true;
+    depthStencilDesc.DepthWriteMask = D3D11_DEPTH_WRITE_MASK_ALL;
+    depthStencilDesc.DepthFunc = D3D11_COMPARISON_ALWAYS;
+    depthStencilDesc.StencilEnable = FALSE;
+    depthStencilDesc.StencilReadMask = D3D11_DEFAULT_STENCIL_READ_MASK;
+    depthStencilDesc.StencilWriteMask = D3D11_DEFAULT_STENCIL_WRITE_MASK;
+    depthStencilDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
+    depthStencilDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
+
+    result = device->CreateDepthStencilState(&depthStencilDesc, &mDepthStencilState);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mDepthStencilState, "Blit11 depth stencil state");
+
+    D3D11_INPUT_ELEMENT_DESC quad2DLayout[] =
+    {
+        { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+        { "TEXCOORD", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 8, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+    };
+
+    result = device->CreateInputLayout(quad2DLayout, ArraySize(quad2DLayout), g_VS_Passthrough2D, ArraySize(g_VS_Passthrough2D), &mQuad2DIL);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mQuad2DIL, "Blit11 2D input layout");
+
+    result = device->CreateVertexShader(g_VS_Passthrough2D, ArraySize(g_VS_Passthrough2D), NULL, &mQuad2DVS);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mQuad2DVS, "Blit11 2D vertex shader");
+
+    if (!renderer->isLevel9())
+    {
+        result = device->CreatePixelShader(g_PS_PassthroughDepth2D, ArraySize(g_PS_PassthroughDepth2D), NULL, &mDepthPS);
+        ASSERT(SUCCEEDED(result));
+        d3d11::SetDebugName(mDepthPS, "Blit11 2D depth pixel shader");
+
+        D3D11_INPUT_ELEMENT_DESC quad3DLayout[] =
+        {
+            { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT,    0,  0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+            { "LAYER",    0, DXGI_FORMAT_R32_UINT,        0,  8, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+            { "TEXCOORD", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 12, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+        };
+
+        result = device->CreateInputLayout(quad3DLayout, ArraySize(quad3DLayout), g_VS_Passthrough3D, ArraySize(g_VS_Passthrough3D), &mQuad3DIL);
+        ASSERT(SUCCEEDED(result));
+        d3d11::SetDebugName(mQuad3DIL, "Blit11 3D input layout");
+
+        result = device->CreateVertexShader(g_VS_Passthrough3D, ArraySize(g_VS_Passthrough3D), NULL, &mQuad3DVS);
+        ASSERT(SUCCEEDED(result));
+        d3d11::SetDebugName(mQuad3DVS, "Blit11 3D vertex shader");
+
+        result = device->CreateGeometryShader(g_GS_Passthrough3D, ArraySize(g_GS_Passthrough3D), NULL, &mQuad3DGS);
+        ASSERT(SUCCEEDED(result));
+        d3d11::SetDebugName(mQuad3DGS, "Renderer11 copy 3D texture geometry shader");
+    }
+
+    buildShaderMap();
+
+    D3D11_BUFFER_DESC swizzleBufferDesc;
+    swizzleBufferDesc.ByteWidth = sizeof(unsigned int) * 4;
+    swizzleBufferDesc.Usage = D3D11_USAGE_DYNAMIC;
+    swizzleBufferDesc.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
+    swizzleBufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+    swizzleBufferDesc.MiscFlags = 0;
+    swizzleBufferDesc.StructureByteStride = 0;
+
+    result = device->CreateBuffer(&swizzleBufferDesc, NULL, &mSwizzleCB);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mSwizzleCB, "Blit11 swizzle constant buffer");
+}
+
+Blit11::~Blit11()
+{
+    SafeRelease(mVertexBuffer);
+    SafeRelease(mPointSampler);
+    SafeRelease(mLinearSampler);
+    SafeRelease(mScissorEnabledRasterizerState);
+    SafeRelease(mScissorDisabledRasterizerState);
+    SafeRelease(mDepthStencilState);
+
+    SafeRelease(mQuad2DIL);
+    SafeRelease(mQuad2DVS);
+    SafeRelease(mDepthPS);
+
+    SafeRelease(mQuad3DIL);
+    SafeRelease(mQuad3DVS);
+    SafeRelease(mQuad3DGS);
+
+    SafeRelease(mSwizzleCB);
+
+    clearShaderMap();
+}
+
+static inline unsigned int GetSwizzleIndex(GLenum swizzle)
+{
+    unsigned int colorIndex = 0;
+
+    switch (swizzle)
+    {
+      case GL_RED:   colorIndex = 0; break;
+      case GL_GREEN: colorIndex = 1; break;
+      case GL_BLUE:  colorIndex = 2; break;
+      case GL_ALPHA: colorIndex = 3; break;
+      case GL_ZERO:  colorIndex = 4; break;
+      case GL_ONE:   colorIndex = 5; break;
+      default:       UNREACHABLE();  break;
+    }
+
+    return colorIndex;
+}
+
+gl::Error Blit11::swizzleTexture(ID3D11ShaderResourceView *source, ID3D11RenderTargetView *dest, const gl::Extents &size,
+                                 GLenum swizzleRed, GLenum swizzleGreen, GLenum swizzleBlue, GLenum swizzleAlpha)
+{
+    HRESULT result;
+    ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+    D3D11_SHADER_RESOURCE_VIEW_DESC sourceSRVDesc;
+    source->GetDesc(&sourceSRVDesc);
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(sourceSRVDesc.Format);
+    const gl::InternalFormat &sourceFormatInfo = gl::GetInternalFormatInfo(dxgiFormatInfo.internalFormat);
+
+    GLenum shaderType = GL_NONE;
+    switch (sourceFormatInfo.componentType)
+    {
+      case GL_UNSIGNED_NORMALIZED:
+      case GL_SIGNED_NORMALIZED:
+      case GL_FLOAT:
+        shaderType = GL_FLOAT;
+        break;
+      case GL_INT:
+        shaderType = GL_INT;
+        break;
+      case GL_UNSIGNED_INT:
+        shaderType = GL_UNSIGNED_INT;
+        break;
+      default:
+        UNREACHABLE();
+        break;
+    }
+
+    SwizzleParameters parameters = { 0 };
+    parameters.mDestinationType = shaderType;
+    parameters.mViewDimension = sourceSRVDesc.ViewDimension;
+
+    SwizzleShaderMap::const_iterator i = mSwizzleShaderMap.find(parameters);
+    if (i == mSwizzleShaderMap.end())
+    {
+        UNREACHABLE();
+        return gl::Error(GL_INVALID_OPERATION, "Internal error, missing swizzle shader.");
+    }
+
+    const Shader &shader = i->second;
+
+    // Set vertices
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    result = deviceContext->Map(mVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal vertex buffer for swizzle, HRESULT: 0x%X.", result);
+    }
+
+    UINT stride = 0;
+    UINT startIdx = 0;
+    UINT drawCount = 0;
+    D3D11_PRIMITIVE_TOPOLOGY topology;
+
+    gl::Box area(0, 0, 0, size.width, size.height, size.depth);
+    shader.mVertexWriteFunction(area, size, area, size, mappedResource.pData, &stride, &drawCount, &topology);
+
+    deviceContext->Unmap(mVertexBuffer, 0);
+
+    // Set constant buffer
+    result = deviceContext->Map(mSwizzleCB, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal constant buffer for swizzle, HRESULT: 0x%X.", result);
+    }
+
+    unsigned int *swizzleIndices = reinterpret_cast<unsigned int*>(mappedResource.pData);
+    swizzleIndices[0] = GetSwizzleIndex(swizzleRed);
+    swizzleIndices[1] = GetSwizzleIndex(swizzleGreen);
+    swizzleIndices[2] = GetSwizzleIndex(swizzleBlue);
+    swizzleIndices[3] = GetSwizzleIndex(swizzleAlpha);
+
+    deviceContext->Unmap(mSwizzleCB, 0);
+
+    // Apply vertex buffer
+    deviceContext->IASetVertexBuffers(0, 1, &mVertexBuffer, &stride, &startIdx);
+
+    // Apply constant buffer
+    deviceContext->PSSetConstantBuffers(0, 1, &mSwizzleCB);
+
+    // Apply state
+    deviceContext->OMSetBlendState(NULL, NULL, 0xFFFFFFF);
+    deviceContext->OMSetDepthStencilState(NULL, 0xFFFFFFFF);
+    deviceContext->RSSetState(mScissorDisabledRasterizerState);
+
+    // Apply shaders
+    deviceContext->IASetInputLayout(shader.mInputLayout);
+    deviceContext->IASetPrimitiveTopology(topology);
+    deviceContext->VSSetShader(shader.mVertexShader, NULL, 0);
+
+    deviceContext->PSSetShader(shader.mPixelShader, NULL, 0);
+    deviceContext->GSSetShader(shader.mGeometryShader, NULL, 0);
+
+    // Unset the currently bound shader resource to avoid conflicts
+    ID3D11ShaderResourceView *const nullSRV = NULL;
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+
+    // Apply render target
+    mRenderer->setOneTimeRenderTarget(dest);
+
+    // Set the viewport
+    D3D11_VIEWPORT viewport;
+    viewport.TopLeftX = 0;
+    viewport.TopLeftY = 0;
+    viewport.Width = size.width;
+    viewport.Height = size.height;
+    viewport.MinDepth = 0.0f;
+    viewport.MaxDepth = 1.0f;
+    deviceContext->RSSetViewports(1, &viewport);
+
+    // Apply textures
+    deviceContext->PSSetShaderResources(0, 1, &source);
+
+    // Apply samplers
+    deviceContext->PSSetSamplers(0, 1, &mPointSampler);
+
+    // Draw the quad
+    deviceContext->Draw(drawCount, 0);
+
+    // Unbind textures and render targets and vertex buffer
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+
+    mRenderer->unapplyRenderTargets();
+
+    UINT zero = 0;
+    ID3D11Buffer *const nullBuffer = NULL;
+    deviceContext->IASetVertexBuffers(0, 1, &nullBuffer, &zero, &zero);
+
+    mRenderer->markAllStateDirty();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+bool Blit11::copyTexture(ID3D11ShaderResourceView *source, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                         ID3D11RenderTargetView *dest, const gl::Box &destArea, const gl::Extents &destSize,
+                         const gl::Rectangle *scissor, GLenum destFormat, GLenum filter)
+{
+    HRESULT result;
+    ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+    // Determine if the source format is a signed integer format, the destFormat will already
+    // be GL_XXXX_INTEGER but it does not tell us if it is signed or unsigned.
+    D3D11_SHADER_RESOURCE_VIEW_DESC sourceSRVDesc;
+    source->GetDesc(&sourceSRVDesc);
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(sourceSRVDesc.Format);
+    const gl::InternalFormat &internalFormatInfo = gl::GetInternalFormatInfo(dxgiFormatInfo.internalFormat);
+
+    BlitParameters parameters = { 0 };
+    parameters.mDestinationFormat = destFormat;
+    parameters.mSignedInteger = (internalFormatInfo.componentType == GL_INT);
+    parameters.m3DBlit = sourceArea.depth > 1;
+
+    BlitShaderMap::const_iterator i = mBlitShaderMap.find(parameters);
+    if (i == mBlitShaderMap.end())
+    {
+        UNREACHABLE();
+        return false;
+    }
+
+    const Shader& shader = i->second;
+
+    // Set vertices
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    result = deviceContext->Map(mVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        ERR("Failed to map vertex buffer for texture copy, HRESULT: 0x%X.", result);
+        return false;
+    }
+
+    UINT stride = 0;
+    UINT startIdx = 0;
+    UINT drawCount = 0;
+    D3D11_PRIMITIVE_TOPOLOGY topology;
+
+    shader.mVertexWriteFunction(sourceArea, sourceSize, destArea, destSize, mappedResource.pData,
+                                &stride, &drawCount, &topology);
+
+    deviceContext->Unmap(mVertexBuffer, 0);
+
+    // Apply vertex buffer
+    deviceContext->IASetVertexBuffers(0, 1, &mVertexBuffer, &stride, &startIdx);
+
+    // Apply state
+    deviceContext->OMSetBlendState(NULL, NULL, 0xFFFFFFF);
+    deviceContext->OMSetDepthStencilState(NULL, 0xFFFFFFFF);
+
+    if (scissor)
+    {
+        D3D11_RECT scissorRect;
+        scissorRect.left = scissor->x;
+        scissorRect.right = scissor->x + scissor->width;
+        scissorRect.top = scissor->y;
+        scissorRect.bottom = scissor->y + scissor->height;
+
+        deviceContext->RSSetScissorRects(1, &scissorRect);
+        deviceContext->RSSetState(mScissorEnabledRasterizerState);
+    }
+    else
+    {
+        deviceContext->RSSetState(mScissorDisabledRasterizerState);
+    }
+
+    // Apply shaders
+    deviceContext->IASetInputLayout(shader.mInputLayout);
+    deviceContext->IASetPrimitiveTopology(topology);
+    deviceContext->VSSetShader(shader.mVertexShader, NULL, 0);
+
+    deviceContext->PSSetShader(shader.mPixelShader, NULL, 0);
+    deviceContext->GSSetShader(shader.mGeometryShader, NULL, 0);
+
+    // Unset the currently bound shader resource to avoid conflicts
+    ID3D11ShaderResourceView *const nullSRV = NULL;
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+
+    // Apply render target
+    mRenderer->setOneTimeRenderTarget(dest);
+
+    // Set the viewport
+    D3D11_VIEWPORT viewport;
+    viewport.TopLeftX = 0;
+    viewport.TopLeftY = 0;
+    viewport.Width = destSize.width;
+    viewport.Height = destSize.height;
+    viewport.MinDepth = 0.0f;
+    viewport.MaxDepth = 1.0f;
+    deviceContext->RSSetViewports(1, &viewport);
+
+    // Apply textures
+    deviceContext->PSSetShaderResources(0, 1, &source);
+
+    // Apply samplers
+    ID3D11SamplerState *sampler = NULL;
+    switch (filter)
+    {
+      case GL_NEAREST: sampler = mPointSampler;  break;
+      case GL_LINEAR:  sampler = mLinearSampler; break;
+      default:         UNREACHABLE(); return false;
+    }
+    deviceContext->PSSetSamplers(0, 1, &sampler);
+
+    // Draw the quad
+    deviceContext->Draw(drawCount, 0);
+
+    // Unbind textures and render targets and vertex buffer
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+
+    mRenderer->unapplyRenderTargets();
+
+    UINT zero = 0;
+    ID3D11Buffer *const nullBuffer = NULL;
+    deviceContext->IASetVertexBuffers(0, 1, &nullBuffer, &zero, &zero);
+
+    mRenderer->markAllStateDirty();
+
+    return true;
+}
+
+bool Blit11::copyStencil(ID3D11Resource *source, unsigned int sourceSubresource, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                         ID3D11Resource *dest, unsigned int destSubresource, const gl::Box &destArea, const gl::Extents &destSize,
+                         const gl::Rectangle *scissor)
+{
+    return copyDepthStencil(source, sourceSubresource, sourceArea, sourceSize,
+                            dest, destSubresource, destArea, destSize,
+                            scissor, true);
+}
+
+bool Blit11::copyDepth(ID3D11ShaderResourceView *source, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                       ID3D11DepthStencilView *dest, const gl::Box &destArea, const gl::Extents &destSize,
+                       const gl::Rectangle *scissor)
+{
+    HRESULT result;
+    ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+    // Set vertices
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    result = deviceContext->Map(mVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        ERR("Failed to map vertex buffer for texture copy, HRESULT: 0x%X.", result);
+        return false;
+    }
+
+    UINT stride = 0;
+    UINT startIdx = 0;
+    UINT drawCount = 0;
+    D3D11_PRIMITIVE_TOPOLOGY topology;
+
+    Write2DVertices(sourceArea, sourceSize, destArea, destSize, mappedResource.pData,
+                    &stride, &drawCount, &topology);
+
+    deviceContext->Unmap(mVertexBuffer, 0);
+
+    // Apply vertex buffer
+    deviceContext->IASetVertexBuffers(0, 1, &mVertexBuffer, &stride, &startIdx);
+
+    // Apply state
+    deviceContext->OMSetBlendState(NULL, NULL, 0xFFFFFFF);
+    deviceContext->OMSetDepthStencilState(mDepthStencilState, 0xFFFFFFFF);
+
+    if (scissor)
+    {
+        D3D11_RECT scissorRect;
+        scissorRect.left = scissor->x;
+        scissorRect.right = scissor->x + scissor->width;
+        scissorRect.top = scissor->y;
+        scissorRect.bottom = scissor->y + scissor->height;
+
+        deviceContext->RSSetScissorRects(1, &scissorRect);
+        deviceContext->RSSetState(mScissorEnabledRasterizerState);
+    }
+    else
+    {
+        deviceContext->RSSetState(mScissorDisabledRasterizerState);
+    }
+
+    // Apply shaders
+    deviceContext->IASetInputLayout(mQuad2DIL);
+    deviceContext->IASetPrimitiveTopology(topology);
+    deviceContext->VSSetShader(mQuad2DVS, NULL, 0);
+
+    deviceContext->PSSetShader(mDepthPS, NULL, 0);
+    deviceContext->GSSetShader(NULL, NULL, 0);
+
+    // Unset the currently bound shader resource to avoid conflicts
+    ID3D11ShaderResourceView *const nullSRV = NULL;
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+
+    // Apply render target
+    deviceContext->OMSetRenderTargets(0, NULL, dest);
+
+    // Set the viewport
+    D3D11_VIEWPORT viewport;
+    viewport.TopLeftX = 0;
+    viewport.TopLeftY = 0;
+    viewport.Width = destSize.width;
+    viewport.Height = destSize.height;
+    viewport.MinDepth = 0.0f;
+    viewport.MaxDepth = 1.0f;
+    deviceContext->RSSetViewports(1, &viewport);
+
+    // Apply textures
+    deviceContext->PSSetShaderResources(0, 1, &source);
+
+    // Apply samplers
+    deviceContext->PSSetSamplers(0, 1, &mPointSampler);
+
+    // Draw the quad
+    deviceContext->Draw(drawCount, 0);
+
+    // Unbind textures and render targets and vertex buffer
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+
+    mRenderer->unapplyRenderTargets();
+
+    UINT zero = 0;
+    ID3D11Buffer *const nullBuffer = NULL;
+    deviceContext->IASetVertexBuffers(0, 1, &nullBuffer, &zero, &zero);
+
+    mRenderer->markAllStateDirty();
+
+    return true;
+}
+
+bool Blit11::copyDepthStencil(ID3D11Resource *source, unsigned int sourceSubresource, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                              ID3D11Resource *dest, unsigned int destSubresource, const gl::Box &destArea, const gl::Extents &destSize,
+                              const gl::Rectangle *scissor)
+{
+    return copyDepthStencil(source, sourceSubresource, sourceArea, sourceSize,
+                            dest, destSubresource, destArea, destSize,
+                            scissor, false);
+}
+
+bool Blit11::copyDepthStencil(ID3D11Resource *source, unsigned int sourceSubresource, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                              ID3D11Resource *dest, unsigned int destSubresource, const gl::Box &destArea, const gl::Extents &destSize,
+                              const gl::Rectangle *scissor, bool stencilOnly)
+{
+    ID3D11Device *device = mRenderer->getDevice();
+    ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+    ID3D11Resource *sourceStaging = CreateStagingTexture(device, deviceContext, source, sourceSubresource, sourceSize, D3D11_CPU_ACCESS_READ);
+    // HACK: Create the destination staging buffer as a read/write texture so ID3D11DevicContext::UpdateSubresource can be called
+    //       using it's mapped data as a source
+    ID3D11Resource *destStaging = CreateStagingTexture(device, deviceContext, dest, destSubresource, destSize, D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE);
+
+    if (!sourceStaging || !destStaging)
+    {
+        SafeRelease(sourceStaging);
+        SafeRelease(destStaging);
+        return false;
+    }
+
+    DXGI_FORMAT format = GetTextureFormat(source);
+    ASSERT(format == GetTextureFormat(dest));
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(format);
+    unsigned int pixelSize = dxgiFormatInfo.pixelBytes;
+    unsigned int copyOffset = 0;
+    unsigned int copySize = pixelSize;
+    if (stencilOnly)
+    {
+        copyOffset = dxgiFormatInfo.depthBits / 8;
+        copySize = dxgiFormatInfo.stencilBits / 8;
+
+        // It would be expensive to have non-byte sized stencil sizes since it would
+        // require reading from the destination, currently there aren't any though.
+        ASSERT(dxgiFormatInfo.stencilBits % 8 == 0 &&
+               dxgiFormatInfo.depthBits   % 8 == 0);
+    }
+
+    D3D11_MAPPED_SUBRESOURCE sourceMapping, destMapping;
+    deviceContext->Map(sourceStaging, 0, D3D11_MAP_READ, 0, &sourceMapping);
+    deviceContext->Map(destStaging, 0, D3D11_MAP_WRITE, 0, &destMapping);
+
+    if (!sourceMapping.pData || !destMapping.pData)
+    {
+        if (!sourceMapping.pData)
+        {
+            deviceContext->Unmap(sourceStaging, 0);
+        }
+        if (!destMapping.pData)
+        {
+            deviceContext->Unmap(destStaging, 0);
+        }
+        SafeRelease(sourceStaging);
+        SafeRelease(destStaging);
+        return false;
+    }
+
+    gl::Rectangle clippedDestArea(destArea.x, destArea.y, destArea.width, destArea.height);
+
+    // Clip dest area to the destination size
+    gl::ClipRectangle(clippedDestArea, gl::Rectangle(0, 0, destSize.width, destSize.height), &clippedDestArea);
+
+    // Clip dest area to the scissor
+    if (scissor)
+    {
+        gl::ClipRectangle(clippedDestArea, *scissor, &clippedDestArea);
+    }
+
+    // Determine if entire rows can be copied at once instead of each individual pixel, requires that there is
+    // no out of bounds lookups required, the entire pixel is copied and no stretching
+    bool wholeRowCopy = sourceArea.width == clippedDestArea.width &&
+                        sourceArea.x >= 0 && sourceArea.x + sourceArea.width <= sourceSize.width &&
+                        copySize == pixelSize;
+
+    for (int y = clippedDestArea.y; y < clippedDestArea.y + clippedDestArea.height; y++)
+    {
+        float yPerc = static_cast<float>(y - destArea.y) / (destArea.height - 1);
+
+        // Interpolate using the original source rectangle to determine which row to sample from while clamping to the edges
+        unsigned int readRow = gl::clamp(sourceArea.y + floor(yPerc * (sourceArea.height - 1) + 0.5f), 0, sourceSize.height - 1);
+        unsigned int writeRow = y;
+
+        if (wholeRowCopy)
+        {
+            void *sourceRow = reinterpret_cast<char*>(sourceMapping.pData) +
+                              readRow * sourceMapping.RowPitch +
+                              sourceArea.x * pixelSize;
+
+            void *destRow = reinterpret_cast<char*>(destMapping.pData) +
+                            writeRow * destMapping.RowPitch +
+                            destArea.x * pixelSize;
+
+            memcpy(destRow, sourceRow, pixelSize * destArea.width);
+        }
+        else
+        {
+            for (int x = clippedDestArea.x; x < clippedDestArea.x + clippedDestArea.width; x++)
+            {
+                float xPerc = static_cast<float>(x - destArea.x) / (destArea.width - 1);
+
+                // Interpolate the original source rectangle to determine which column to sample from while clamping to the edges
+                unsigned int readColumn = gl::clamp(sourceArea.x + floor(xPerc * (sourceArea.width - 1) + 0.5f), 0, sourceSize.width - 1);
+                unsigned int writeColumn = x;
+
+                void *sourcePixel = reinterpret_cast<char*>(sourceMapping.pData) +
+                                    readRow * sourceMapping.RowPitch +
+                                    readColumn * pixelSize +
+                                    copyOffset;
+
+                void *destPixel = reinterpret_cast<char*>(destMapping.pData) +
+                                  writeRow * destMapping.RowPitch +
+                                  writeColumn * pixelSize +
+                                  copyOffset;
+
+                memcpy(destPixel, sourcePixel, copySize);
+            }
+        }
+    }
+
+    // HACK: Use ID3D11DevicContext::UpdateSubresource which causes an extra copy compared to ID3D11DevicContext::CopySubresourceRegion
+    //       according to MSDN.
+    deviceContext->UpdateSubresource(dest, destSubresource, NULL, destMapping.pData, destMapping.RowPitch, destMapping.DepthPitch);
+
+    deviceContext->Unmap(sourceStaging, 0);
+    deviceContext->Unmap(destStaging, 0);
+
+    // TODO: Determine why this call to ID3D11DevicContext::CopySubresourceRegion causes a TDR timeout on some
+    //       systems when called repeatedly.
+    // deviceContext->CopySubresourceRegion(dest, destSubresource, 0, 0, 0, destStaging, 0, NULL);
+
+    SafeRelease(sourceStaging);
+    SafeRelease(destStaging);
+
+    return true;
+}
+
+bool Blit11::compareBlitParameters(const Blit11::BlitParameters &a, const Blit11::BlitParameters &b)
+{
+    return memcmp(&a, &b, sizeof(Blit11::BlitParameters)) < 0;
+}
+
+bool Blit11::compareSwizzleParameters(const SwizzleParameters &a, const SwizzleParameters &b)
+{
+    return memcmp(&a, &b, sizeof(Blit11::SwizzleParameters)) < 0;
+}
+
+void Blit11::add2DBlitShaderToMap(GLenum destFormat, bool signedInteger, ID3D11PixelShader *ps)
+{
+    BlitParameters params = { 0 };
+    params.mDestinationFormat = destFormat;
+    params.mSignedInteger = signedInteger;
+    params.m3DBlit = false;
+
+    ASSERT(mBlitShaderMap.find(params) == mBlitShaderMap.end());
+    ASSERT(ps);
+
+    Shader shader;
+    shader.mVertexWriteFunction = Write2DVertices;
+    shader.mInputLayout = mQuad2DIL;
+    shader.mVertexShader = mQuad2DVS;
+    shader.mGeometryShader = NULL;
+    shader.mPixelShader = ps;
+
+    mBlitShaderMap[params] = shader;
+}
+
+void Blit11::add3DBlitShaderToMap(GLenum destFormat, bool signedInteger, ID3D11PixelShader *ps)
+{
+    BlitParameters params = { 0 };
+    params.mDestinationFormat = destFormat;
+    params.mSignedInteger = signedInteger;
+    params.m3DBlit = true;
+
+    ASSERT(mBlitShaderMap.find(params) == mBlitShaderMap.end());
+    ASSERT(ps);
+
+    Shader shader;
+    shader.mVertexWriteFunction = Write3DVertices;
+    shader.mInputLayout = mQuad3DIL;
+    shader.mVertexShader = mQuad3DVS;
+    shader.mGeometryShader = mQuad3DGS;
+    shader.mPixelShader = ps;
+
+    mBlitShaderMap[params] = shader;
+}
+
+void Blit11::addSwizzleShaderToMap(GLenum destType, D3D11_SRV_DIMENSION viewDimension, ID3D11PixelShader *ps)
+{
+    SwizzleParameters params = { 0 };
+    params.mDestinationType = destType;
+    params.mViewDimension = viewDimension;
+
+    ASSERT(mSwizzleShaderMap.find(params) == mSwizzleShaderMap.end());
+    ASSERT(ps);
+
+    Shader shader;
+    switch (viewDimension)
+    {
+      case D3D_SRV_DIMENSION_TEXTURE2D:
+        shader.mVertexWriteFunction = Write2DVertices;
+        shader.mInputLayout = mQuad2DIL;
+        shader.mVertexShader = mQuad2DVS;
+        shader.mGeometryShader = NULL;
+        break;
+
+      case D3D_SRV_DIMENSION_TEXTURE3D:
+      case D3D_SRV_DIMENSION_TEXTURE2DARRAY:
+      case D3D_SRV_DIMENSION_TEXTURECUBE:
+        shader.mVertexWriteFunction = Write3DVertices;
+        shader.mInputLayout = mQuad3DIL;
+        shader.mVertexShader = mQuad3DVS;
+        shader.mGeometryShader = mQuad3DGS;
+        break;
+
+      default:
+        UNREACHABLE();
+        break;
+    }
+    shader.mPixelShader = ps;
+
+    mSwizzleShaderMap[params] = shader;
+}
+
+void Blit11::buildShaderMap()
+{
+    ID3D11Device *device = mRenderer->getDevice();
+
+    add2DBlitShaderToMap(GL_RGBA,            false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2D,     "Blit11 2D RGBA pixel shader"           ));
+    add2DBlitShaderToMap(GL_BGRA_EXT,        false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2D,     "Blit11 2D BGRA pixel shader"           ));
+    add2DBlitShaderToMap(GL_RGB,             false, d3d11::CompilePS(device, g_PS_PassthroughRGB2D,      "Blit11 2D RGB pixel shader"            ));
+    add2DBlitShaderToMap(GL_RG,              false, d3d11::CompilePS(device, g_PS_PassthroughRG2D,       "Blit11 2D RG pixel shader"             ));
+    add2DBlitShaderToMap(GL_RED,             false, d3d11::CompilePS(device, g_PS_PassthroughR2D,        "Blit11 2D R pixel shader"              ));
+    add2DBlitShaderToMap(GL_ALPHA,           false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2D,     "Blit11 2D alpha pixel shader"          ));
+    add2DBlitShaderToMap(GL_LUMINANCE,       false, d3d11::CompilePS(device, g_PS_PassthroughLum2D,      "Blit11 2D lum pixel shader"            ));
+    add2DBlitShaderToMap(GL_LUMINANCE_ALPHA, false, d3d11::CompilePS(device, g_PS_PassthroughLumAlpha2D, "Blit11 2D luminance alpha pixel shader"));
+
+    addSwizzleShaderToMap(GL_FLOAT,        D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleF2D,       "Blit11 2D F swizzle pixel shader" ));
+
+    if (mRenderer->isLevel9())
+        return;
+
+    add2DBlitShaderToMap(GL_RGBA_INTEGER,    false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2DUI,   "Blit11 2D RGBA UI pixel shader"        ));
+    add2DBlitShaderToMap(GL_RGBA_INTEGER,    true,  d3d11::CompilePS(device, g_PS_PassthroughRGBA2DI,    "Blit11 2D RGBA I pixel shader"         ));
+    add2DBlitShaderToMap(GL_RGB_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughRGB2DUI,    "Blit11 2D RGB UI pixel shader"         ));
+    add2DBlitShaderToMap(GL_RGB_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughRGB2DI,     "Blit11 2D RGB I pixel shader"          ));
+    add2DBlitShaderToMap(GL_RG_INTEGER,      false, d3d11::CompilePS(device, g_PS_PassthroughRG2DUI,     "Blit11 2D RG UI pixel shader"          ));
+    add2DBlitShaderToMap(GL_RG_INTEGER,      true,  d3d11::CompilePS(device, g_PS_PassthroughRG2DI,      "Blit11 2D RG I pixel shader"           ));
+    add2DBlitShaderToMap(GL_RED_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughR2DUI,      "Blit11 2D R UI pixel shader"           ));
+    add2DBlitShaderToMap(GL_RED_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughR2DI,       "Blit11 2D R I pixel shader"            ));
+    add3DBlitShaderToMap(GL_RGBA,            false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3D,     "Blit11 3D RGBA pixel shader"           ));
+    add3DBlitShaderToMap(GL_RGBA_INTEGER,    false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3DUI,   "Blit11 3D UI RGBA pixel shader"        ));
+    add3DBlitShaderToMap(GL_RGBA_INTEGER,    true,  d3d11::CompilePS(device, g_PS_PassthroughRGBA3DI,    "Blit11 3D I RGBA pixel shader"         ));
+    add3DBlitShaderToMap(GL_BGRA_EXT,        false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3D,     "Blit11 3D BGRA pixel shader"           ));
+    add3DBlitShaderToMap(GL_RGB,             false, d3d11::CompilePS(device, g_PS_PassthroughRGB3D,      "Blit11 3D RGB pixel shader"            ));
+    add3DBlitShaderToMap(GL_RG,              false, d3d11::CompilePS(device, g_PS_PassthroughRG3D,       "Blit11 3D RG pixel shader"             ));
+    add3DBlitShaderToMap(GL_RGB_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughRGB3DUI,    "Blit11 3D RGB UI pixel shader"         ));
+    add3DBlitShaderToMap(GL_RGB_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughRGB3DI,     "Blit11 3D RGB I pixel shader"          ));
+    add3DBlitShaderToMap(GL_RED,             false, d3d11::CompilePS(device, g_PS_PassthroughR3D,        "Blit11 3D R pixel shader"              ));
+    add3DBlitShaderToMap(GL_RG_INTEGER,      false, d3d11::CompilePS(device, g_PS_PassthroughRG3DUI,     "Blit11 3D RG UI pixel shader"          ));
+    add3DBlitShaderToMap(GL_RG_INTEGER,      true,  d3d11::CompilePS(device, g_PS_PassthroughRG3DI,      "Blit11 3D RG I pixel shader"           ));
+    add3DBlitShaderToMap(GL_RED_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughR3DUI,      "Blit11 3D R UI pixel shader"           ));
+    add3DBlitShaderToMap(GL_RED_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughR3DI,       "Blit11 3D R I pixel shader"            ));
+    add3DBlitShaderToMap(GL_ALPHA,           false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3D,     "Blit11 3D alpha pixel shader"          ));
+    add3DBlitShaderToMap(GL_LUMINANCE,       false, d3d11::CompilePS(device, g_PS_PassthroughLum3D,      "Blit11 3D luminance pixel shader"      ));
+    add3DBlitShaderToMap(GL_LUMINANCE_ALPHA, false, d3d11::CompilePS(device, g_PS_PassthroughLumAlpha3D, "Blit11 3D luminance alpha pixel shader"));
+
+    addSwizzleShaderToMap(GL_UNSIGNED_INT, D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleUI2D,      "Blit11 2D UI swizzle pixel shader"));
+    addSwizzleShaderToMap(GL_INT,          D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleI2D,       "Blit11 2D I swizzle pixel shader" ));
+
+    addSwizzleShaderToMap(GL_FLOAT,        D3D_SRV_DIMENSION_TEXTURECUBE,    d3d11::CompilePS(device, g_PS_SwizzleF2DArray,  "Blit11 2D Cube F swizzle pixel shader" ));
+    addSwizzleShaderToMap(GL_UNSIGNED_INT, D3D_SRV_DIMENSION_TEXTURECUBE,    d3d11::CompilePS(device, g_PS_SwizzleUI2DArray, "Blit11 2D Cube UI swizzle pixel shader"));
+    addSwizzleShaderToMap(GL_INT,          D3D_SRV_DIMENSION_TEXTURECUBE,    d3d11::CompilePS(device, g_PS_SwizzleI2DArray,  "Blit11 2D Cube I swizzle pixel shader" ));
+
+    addSwizzleShaderToMap(GL_FLOAT,        D3D_SRV_DIMENSION_TEXTURE3D,      d3d11::CompilePS(device, g_PS_SwizzleF3D,       "Blit11 3D F swizzle pixel shader" ));
+    addSwizzleShaderToMap(GL_UNSIGNED_INT, D3D_SRV_DIMENSION_TEXTURE3D,      d3d11::CompilePS(device, g_PS_SwizzleUI3D,      "Blit11 3D UI swizzle pixel shader"));
+    addSwizzleShaderToMap(GL_INT,          D3D_SRV_DIMENSION_TEXTURE3D,      d3d11::CompilePS(device, g_PS_SwizzleI3D,       "Blit11 3D I swizzle pixel shader" ));
+
+    addSwizzleShaderToMap(GL_FLOAT,        D3D_SRV_DIMENSION_TEXTURE2DARRAY, d3d11::CompilePS(device, g_PS_SwizzleF2DArray,  "Blit11 2D Array F swizzle pixel shader" ));
+    addSwizzleShaderToMap(GL_UNSIGNED_INT, D3D_SRV_DIMENSION_TEXTURE2DARRAY, d3d11::CompilePS(device, g_PS_SwizzleUI2DArray, "Blit11 2D Array UI swizzle pixel shader"));
+    addSwizzleShaderToMap(GL_INT,          D3D_SRV_DIMENSION_TEXTURE2DARRAY, d3d11::CompilePS(device, g_PS_SwizzleI2DArray,  "Blit11 2D Array I swizzle pixel shader" ));
+}
+
+void Blit11::clearShaderMap()
+{
+    for (BlitShaderMap::iterator i = mBlitShaderMap.begin(); i != mBlitShaderMap.end(); ++i)
+    {
+        Shader &shader = i->second;
+        SafeRelease(shader.mPixelShader);
+    }
+    mBlitShaderMap.clear();
+
+    for (SwizzleShaderMap::iterator i = mSwizzleShaderMap.begin(); i != mSwizzleShaderMap.end(); ++i)
+    {
+        Shader &shader = i->second;
+        SafeRelease(shader.mPixelShader);
+    }
+    mSwizzleShaderMap.clear();
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.h
new file mode 100644
index 0000000000..d6a0b795f4
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.h
@@ -0,0 +1,129 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Blit11.cpp: Texture copy utility class.
+
+#ifndef LIBGLESV2_BLIT11_H_
+#define LIBGLESV2_BLIT11_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/Error.h"
+
+#include <map>
+
+namespace rx
+{
+class Renderer11;
+
+enum Filter
+{
+    Point,
+    Linear,
+};
+
+class Blit11
+{
+  public:
+    explicit Blit11(Renderer11 *renderer);
+    ~Blit11();
+
+    gl::Error swizzleTexture(ID3D11ShaderResourceView *source, ID3D11RenderTargetView *dest, const gl::Extents &size,
+                             GLenum swizzleRed, GLenum swizzleGreen, GLenum swizzleBlue, GLenum swizzleAlpha);
+
+    bool copyTexture(ID3D11ShaderResourceView *source, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                     ID3D11RenderTargetView *dest, const gl::Box &destArea, const gl::Extents &destSize,
+                     const gl::Rectangle *scissor, GLenum destFormat, GLenum filter);
+
+    bool copyStencil(ID3D11Resource *source, unsigned int sourceSubresource, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                     ID3D11Resource *dest, unsigned int destSubresource, const gl::Box &destArea, const gl::Extents &destSize,
+                     const gl::Rectangle *scissor);
+
+    bool copyDepth(ID3D11ShaderResourceView *source, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                   ID3D11DepthStencilView *dest, const gl::Box &destArea, const gl::Extents &destSize,
+                   const gl::Rectangle *scissor);
+
+    bool copyDepthStencil(ID3D11Resource *source, unsigned int sourceSubresource, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                          ID3D11Resource *dest, unsigned int destSubresource, const gl::Box &destArea, const gl::Extents &destSize,
+                          const gl::Rectangle *scissor);
+
+  private:
+    rx::Renderer11 *mRenderer;
+
+    struct BlitParameters
+    {
+        GLenum mDestinationFormat;
+        bool mSignedInteger;
+        bool m3DBlit;
+    };
+
+    bool copyDepthStencil(ID3D11Resource *source, unsigned int sourceSubresource, const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                          ID3D11Resource *dest, unsigned int destSubresource, const gl::Box &destArea, const gl::Extents &destSize,
+                          const gl::Rectangle *scissor, bool stencilOnly);
+
+    static bool compareBlitParameters(const BlitParameters &a, const BlitParameters &b);
+
+    typedef void (*WriteVertexFunction)(const gl::Box &sourceArea, const gl::Extents &sourceSize,
+                                        const gl::Box &destArea, const gl::Extents &destSize,
+                                        void *outVertices, unsigned int *outStride, unsigned int *outVertexCount,
+                                        D3D11_PRIMITIVE_TOPOLOGY *outTopology);
+
+    struct Shader
+    {
+        WriteVertexFunction mVertexWriteFunction;
+        ID3D11InputLayout *mInputLayout;
+        ID3D11VertexShader *mVertexShader;
+        ID3D11GeometryShader *mGeometryShader;
+        ID3D11PixelShader *mPixelShader;
+    };
+
+    typedef bool (*BlitParametersComparisonFunction)(const BlitParameters&, const BlitParameters &);
+    typedef std::map<BlitParameters, Shader, BlitParametersComparisonFunction> BlitShaderMap;
+    BlitShaderMap mBlitShaderMap;
+
+    void add2DBlitShaderToMap(GLenum destFormat, bool signedInteger, ID3D11PixelShader *ps);
+    void add3DBlitShaderToMap(GLenum destFormat, bool signedInteger, ID3D11PixelShader *ps);
+
+    struct SwizzleParameters
+    {
+        GLenum mDestinationType;
+        D3D11_SRV_DIMENSION mViewDimension;
+    };
+
+    static bool compareSwizzleParameters(const SwizzleParameters &a, const SwizzleParameters &b);
+
+    typedef bool (*SwizzleParametersComparisonFunction)(const SwizzleParameters&, const SwizzleParameters &);
+    typedef std::map<SwizzleParameters, Shader, SwizzleParametersComparisonFunction> SwizzleShaderMap;
+    SwizzleShaderMap mSwizzleShaderMap;
+
+    void addSwizzleShaderToMap(GLenum destType, D3D11_SRV_DIMENSION viewDimension, ID3D11PixelShader *ps);
+
+    void buildShaderMap();
+    void clearShaderMap();
+
+    ID3D11Buffer *mVertexBuffer;
+    ID3D11SamplerState *mPointSampler;
+    ID3D11SamplerState *mLinearSampler;
+    ID3D11RasterizerState *mScissorEnabledRasterizerState;
+    ID3D11RasterizerState *mScissorDisabledRasterizerState;
+    ID3D11DepthStencilState *mDepthStencilState;
+
+    ID3D11InputLayout *mQuad2DIL;
+    ID3D11VertexShader *mQuad2DVS;
+    ID3D11PixelShader *mDepthPS;
+
+    ID3D11InputLayout *mQuad3DIL;
+    ID3D11VertexShader *mQuad3DVS;
+    ID3D11GeometryShader *mQuad3DGS;
+
+    ID3D11Buffer *mSwizzleCB;
+
+    DISALLOW_COPY_AND_ASSIGN(Blit11);
+};
+
+}
+
+#endif   // LIBGLESV2_BLIT11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp
new file mode 100644
index 0000000000..ecd4d4672b
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp
@@ -0,0 +1,961 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Buffer11.cpp Defines the Buffer11 class.
+
+#include "libGLESv2/renderer/d3d/d3d11/Buffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+PackPixelsParams::PackPixelsParams()
+  : format(GL_NONE),
+    type(GL_NONE),
+    outputPitch(0),
+    packBuffer(NULL),
+    offset(0)
+{}
+
+PackPixelsParams::PackPixelsParams(const gl::Rectangle &areaIn, GLenum formatIn, GLenum typeIn, GLuint outputPitchIn,
+                                   const gl::PixelPackState &packIn, ptrdiff_t offsetIn)
+  : area(areaIn),
+    format(formatIn),
+    type(typeIn),
+    outputPitch(outputPitchIn),
+    packBuffer(packIn.pixelBuffer.get()),
+    pack(packIn.alignment, packIn.reverseRowOrder),
+    offset(offsetIn)
+{}
+
+namespace gl_d3d11
+{
+
+D3D11_MAP GetD3DMapTypeFromBits(GLbitfield access)
+{
+    bool readBit = ((access & GL_MAP_READ_BIT) != 0);
+    bool writeBit = ((access & GL_MAP_WRITE_BIT) != 0);
+
+    ASSERT(readBit || writeBit);
+
+    // Note : we ignore the discard bit, because in D3D11, staging buffers
+    //  don't accept the map-discard flag (discard only works for DYNAMIC usage)
+
+    if (readBit && !writeBit)
+    {
+        return D3D11_MAP_READ;
+    }
+    else if (writeBit && !readBit)
+    {
+        return D3D11_MAP_WRITE;
+    }
+    else if (writeBit && readBit)
+    {
+        return D3D11_MAP_READ_WRITE;
+    }
+    else
+    {
+        UNREACHABLE();
+        return D3D11_MAP_READ;
+    }
+}
+
+}
+
+// Each instance of Buffer11::BufferStorage11 is specialized for a class of D3D binding points
+// - vertex/transform feedback buffers
+// - index buffers
+// - pixel unpack buffers
+// - uniform buffers
+class Buffer11::BufferStorage11
+{
+  public:
+    virtual ~BufferStorage11() {}
+
+    DataRevision getDataRevision() const { return mRevision; }
+    BufferUsage getUsage() const { return mUsage; }
+    size_t getSize() const { return mBufferSize; }
+    bool isMappable() const { return (mUsage == BUFFER_USAGE_STAGING || mUsage == BUFFER_USAGE_PIXEL_PACK); }
+
+    void setDataRevision(DataRevision rev) { mRevision = rev; }
+
+    virtual bool copyFromStorage(BufferStorage11 *source, size_t sourceOffset,
+                                 size_t size, size_t destOffset) = 0;
+    virtual bool resize(size_t size, bool preserveData) = 0;
+
+    virtual void *map(size_t offset, size_t length, GLbitfield access) = 0;
+    virtual void unmap() = 0;
+
+  protected:
+    BufferStorage11(Renderer11 *renderer, BufferUsage usage);
+
+    Renderer11 *mRenderer;
+    DataRevision mRevision;
+    const BufferUsage mUsage;
+    size_t mBufferSize;
+};
+
+// A native buffer storage represents an underlying D3D11 buffer for a particular
+// type of storage.
+class Buffer11::NativeBuffer11 : public Buffer11::BufferStorage11
+{
+  public:
+    NativeBuffer11(Renderer11 *renderer, BufferUsage usage);
+    ~NativeBuffer11();
+
+    ID3D11Buffer *getNativeBuffer() const { return mNativeBuffer; }
+
+    virtual bool copyFromStorage(BufferStorage11 *source, size_t sourceOffset,
+                                 size_t size, size_t destOffset);
+    virtual bool resize(size_t size, bool preserveData);
+
+    virtual void *map(size_t offset, size_t length, GLbitfield access);
+    virtual void unmap();
+
+    bool setData(D3D11_MAP mapMode, const uint8_t *data, size_t size, size_t offset);
+
+  private:
+    ID3D11Buffer *mNativeBuffer;
+
+    static void fillBufferDesc(D3D11_BUFFER_DESC* bufferDesc, Renderer *renderer, BufferUsage usage, unsigned int bufferSize);
+};
+
+// Pack storage represents internal storage for pack buffers. We implement pack buffers
+// as CPU memory, tied to a staging texture, for asynchronous texture readback.
+class Buffer11::PackStorage11 : public Buffer11::BufferStorage11
+{
+  public:
+    PackStorage11(Renderer11 *renderer);
+    ~PackStorage11();
+
+    virtual bool copyFromStorage(BufferStorage11 *source, size_t sourceOffset,
+                                 size_t size, size_t destOffset);
+    virtual bool resize(size_t size, bool preserveData);
+
+    virtual void *map(size_t offset, size_t length, GLbitfield access);
+    virtual void unmap();
+
+    gl::Error packPixels(ID3D11Texture2D *srcTexure, UINT srcSubresource, const PackPixelsParams &params);
+
+  private:
+
+    void flushQueuedPackCommand();
+
+    ID3D11Texture2D *mStagingTexture;
+    DXGI_FORMAT mTextureFormat;
+    gl::Extents mTextureSize;
+    MemoryBuffer mMemoryBuffer;
+    PackPixelsParams *mQueuedPackCommand;
+    PackPixelsParams mPackParams;
+    bool mDataModified;
+};
+
+
+Buffer11::Buffer11(Renderer11 *renderer)
+    : BufferD3D(),
+      mRenderer(renderer),
+      mSize(0),
+      mMappedStorage(NULL),
+      mResolvedDataRevision(0),
+      mReadUsageCount(0)
+{}
+
+Buffer11::~Buffer11()
+{
+    for (auto it = mBufferStorages.begin(); it != mBufferStorages.end(); it++)
+    {
+        SafeDelete(it->second);
+    }
+}
+
+Buffer11 *Buffer11::makeBuffer11(BufferImpl *buffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(Buffer11*, buffer));
+    return static_cast<Buffer11*>(buffer);
+}
+
+gl::Error Buffer11::setData(const void *data, size_t size, GLenum usage)
+{
+    gl::Error error = setSubData(data, size, 0);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    if (usage == GL_STATIC_DRAW)
+    {
+        initializeStaticData();
+    }
+
+    return error;
+}
+
+void *Buffer11::getData()
+{
+    NativeBuffer11 *stagingBuffer = getStagingBuffer();
+
+    if (!stagingBuffer)
+    {
+        // Out-of-memory
+        return NULL;
+    }
+
+    if (stagingBuffer->getDataRevision() > mResolvedDataRevision)
+    {
+        if (stagingBuffer->getSize() > mResolvedData.size())
+        {
+            if (!mResolvedData.resize(stagingBuffer->getSize()))
+            {
+                return gl::error(GL_OUT_OF_MEMORY, (void*)NULL);
+            }
+        }
+
+        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+        D3D11_MAPPED_SUBRESOURCE mappedResource;
+        HRESULT result = context->Map(stagingBuffer->getNativeBuffer(), 0, D3D11_MAP_READ, 0, &mappedResource);
+        if (FAILED(result))
+        {
+            return gl::error(GL_OUT_OF_MEMORY, (void*)NULL);
+        }
+
+        memcpy(mResolvedData.data(), mappedResource.pData, stagingBuffer->getSize());
+
+        context->Unmap(stagingBuffer->getNativeBuffer(), 0);
+
+        mResolvedDataRevision = stagingBuffer->getDataRevision();
+    }
+
+    mReadUsageCount = 0;
+
+    // Only happens if we initialized the buffer with no data (NULL)
+    if (mResolvedData.empty())
+    {
+        if (!mResolvedData.resize(mSize))
+        {
+            return gl::error(GL_OUT_OF_MEMORY, (void*)NULL);
+        }
+    }
+
+    ASSERT(mResolvedData.size() >= mSize);
+
+    return mResolvedData.data();
+}
+
+gl::Error Buffer11::setSubData(const void *data, size_t size, size_t offset)
+{
+    size_t requiredSize = size + offset;
+
+    if (data && size > 0)
+    {
+        NativeBuffer11 *stagingBuffer = getStagingBuffer();
+
+        if (!stagingBuffer)
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal staging buffer.");
+        }
+
+        // Explicitly resize the staging buffer, preserving data if the new data will not
+        // completely fill the buffer
+        if (stagingBuffer->getSize() < requiredSize)
+        {
+            bool preserveData = (offset > 0);
+            if (!stagingBuffer->resize(requiredSize, preserveData))
+            {
+                return gl::Error(GL_OUT_OF_MEMORY, "Failed to resize internal staging buffer.");
+            }
+        }
+
+        if (!stagingBuffer->setData(D3D11_MAP_WRITE, reinterpret_cast<const uint8_t *>(data), size, offset))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to set data on internal staging buffer.");
+        }
+
+        stagingBuffer->setDataRevision(stagingBuffer->getDataRevision() + 1);
+    }
+
+    mSize = std::max(mSize, requiredSize);
+    invalidateStaticData();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Buffer11::copySubData(BufferImpl* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size)
+{
+    Buffer11 *sourceBuffer = makeBuffer11(source);
+    ASSERT(sourceBuffer != NULL);
+
+    BufferStorage11 *copyDest = getLatestBufferStorage();
+    if (!copyDest)
+    {
+        copyDest = getStagingBuffer();
+    }
+
+    BufferStorage11 *copySource = sourceBuffer->getLatestBufferStorage();
+
+    if (!copySource || !copyDest)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal staging buffer.");
+    }
+
+    // If copying to/from a pixel pack buffer, we must have a staging or
+    // pack buffer partner, because other native buffers can't be mapped
+    if (copyDest->getUsage() == BUFFER_USAGE_PIXEL_PACK && !copySource->isMappable())
+    {
+        copySource = sourceBuffer->getStagingBuffer();
+    }
+    else if (copySource->getUsage() == BUFFER_USAGE_PIXEL_PACK && !copyDest->isMappable())
+    {
+        copyDest = getStagingBuffer();
+    }
+
+    // D3D11 does not allow overlapped copies until 11.1, and only if the
+    // device supports D3D11_FEATURE_DATA_D3D11_OPTIONS::CopyWithOverlap
+    // Get around this via a different source buffer
+    if (copySource == copyDest)
+    {
+        if (copySource->getUsage() == BUFFER_USAGE_STAGING)
+        {
+            copySource = getBufferStorage(BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK);
+        }
+        else
+        {
+            copySource = getStagingBuffer();
+        }
+    }
+
+    copyDest->copyFromStorage(copySource, sourceOffset, size, destOffset);
+    copyDest->setDataRevision(copyDest->getDataRevision() + 1);
+
+    mSize = std::max<size_t>(mSize, destOffset + size);
+    invalidateStaticData();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Buffer11::map(size_t offset, size_t length, GLbitfield access, GLvoid **mapPtr)
+{
+    ASSERT(!mMappedStorage);
+
+    BufferStorage11 *latestStorage = getLatestBufferStorage();
+    if (latestStorage &&
+        (latestStorage->getUsage() == BUFFER_USAGE_PIXEL_PACK ||
+         latestStorage->getUsage() == BUFFER_USAGE_STAGING))
+    {
+        // Latest storage is mappable.
+        mMappedStorage = latestStorage;
+    }
+    else
+    {
+        // Fall back to using the staging buffer if the latest storage does
+        // not exist or is not CPU-accessible.
+        mMappedStorage = getStagingBuffer();
+    }
+
+    if (!mMappedStorage)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate mappable internal buffer.");
+    }
+
+    if ((access & GL_MAP_WRITE_BIT) > 0)
+    {
+        // Update the data revision immediately, since the data might be changed at any time
+        mMappedStorage->setDataRevision(mMappedStorage->getDataRevision() + 1);
+    }
+
+    void *mappedBuffer = mMappedStorage->map(offset, length, access);
+    if (!mappedBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal buffer.");
+    }
+
+    *mapPtr = mappedBuffer;
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Buffer11::unmap()
+{
+    ASSERT(mMappedStorage);
+    mMappedStorage->unmap();
+    mMappedStorage = NULL;
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Buffer11::markTransformFeedbackUsage()
+{
+    BufferStorage11 *transformFeedbackStorage = getBufferStorage(BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK);
+
+    if (transformFeedbackStorage)
+    {
+        transformFeedbackStorage->setDataRevision(transformFeedbackStorage->getDataRevision() + 1);
+    }
+
+    invalidateStaticData();
+}
+
+void Buffer11::markBufferUsage()
+{
+    mReadUsageCount++;
+
+    const unsigned int usageLimit = 5;
+
+    if (mReadUsageCount > usageLimit && mResolvedData.size() > 0)
+    {
+        mResolvedData.resize(0);
+        mResolvedDataRevision = 0;
+    }
+}
+
+Renderer* Buffer11::getRenderer()
+{
+    return mRenderer;
+}
+
+ID3D11Buffer *Buffer11::getBuffer(BufferUsage usage)
+{
+    markBufferUsage();
+
+    BufferStorage11 *bufferStorage = getBufferStorage(usage);
+
+    if (!bufferStorage)
+    {
+        // Storage out-of-memory
+        return NULL;
+    }
+
+    ASSERT(HAS_DYNAMIC_TYPE(NativeBuffer11*, bufferStorage));
+
+    return static_cast<NativeBuffer11*>(bufferStorage)->getNativeBuffer();
+}
+
+ID3D11ShaderResourceView *Buffer11::getSRV(DXGI_FORMAT srvFormat)
+{
+    BufferStorage11 *storage = getBufferStorage(BUFFER_USAGE_PIXEL_UNPACK);
+
+    if (!storage)
+    {
+        // Storage out-of-memory
+        return NULL;
+    }
+
+    ASSERT(HAS_DYNAMIC_TYPE(NativeBuffer11*, storage));
+    ID3D11Buffer *buffer = static_cast<NativeBuffer11*>(storage)->getNativeBuffer();
+
+    auto bufferSRVIt = mBufferResourceViews.find(srvFormat);
+
+    if (bufferSRVIt != mBufferResourceViews.end())
+    {
+        if (bufferSRVIt->second.first == buffer)
+        {
+            return bufferSRVIt->second.second;
+        }
+        else
+        {
+            // The underlying buffer has changed since the SRV was created: recreate the SRV.
+            SafeRelease(bufferSRVIt->second.second);
+        }
+    }
+
+    ID3D11Device *device = mRenderer->getDevice();
+    ID3D11ShaderResourceView *bufferSRV = NULL;
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(srvFormat);
+
+    D3D11_SHADER_RESOURCE_VIEW_DESC bufferSRVDesc;
+    bufferSRVDesc.Buffer.ElementOffset = 0;
+    bufferSRVDesc.Buffer.ElementWidth = mSize / dxgiFormatInfo.pixelBytes;
+    bufferSRVDesc.ViewDimension = D3D11_SRV_DIMENSION_BUFFER;
+    bufferSRVDesc.Format = srvFormat;
+
+    HRESULT result = device->CreateShaderResourceView(buffer, &bufferSRVDesc, &bufferSRV);
+    UNUSED_ASSERTION_VARIABLE(result);
+    ASSERT(SUCCEEDED(result));
+
+    mBufferResourceViews[srvFormat] = BufferSRVPair(buffer, bufferSRV);
+
+    return bufferSRV;
+}
+
+gl::Error Buffer11::packPixels(ID3D11Texture2D *srcTexture, UINT srcSubresource, const PackPixelsParams &params)
+{
+    PackStorage11 *packStorage = getPackStorage();
+
+    BufferStorage11 *latestStorage = getLatestBufferStorage();
+
+    if (packStorage)
+    {
+        gl::Error error = packStorage->packPixels(srcTexture, srcSubresource, params);
+        if (error.isError())
+        {
+            return error;
+        }
+        packStorage->setDataRevision(latestStorage ? latestStorage->getDataRevision() + 1 : 1);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+Buffer11::BufferStorage11 *Buffer11::getBufferStorage(BufferUsage usage)
+{
+    BufferStorage11 *directBuffer = NULL;
+    auto directBufferIt = mBufferStorages.find(usage);
+    if (directBufferIt != mBufferStorages.end())
+    {
+        directBuffer = directBufferIt->second;
+    }
+
+    if (!directBuffer)
+    {
+        if (usage == BUFFER_USAGE_PIXEL_PACK)
+        {
+            directBuffer = new PackStorage11(mRenderer);
+        }
+        else
+        {
+            // buffer is not allocated, create it
+            directBuffer = new NativeBuffer11(mRenderer, usage);
+        }
+
+        mBufferStorages.insert(std::make_pair(usage, directBuffer));
+    }
+
+    // resize buffer
+    if (directBuffer->getSize() < mSize)
+    {
+        if (!directBuffer->resize(mSize, true))
+        {
+            // Out of memory error
+            return NULL;
+        }
+    }
+
+    BufferStorage11 *latestBuffer = getLatestBufferStorage();
+    if (latestBuffer && latestBuffer->getDataRevision() > directBuffer->getDataRevision())
+    {
+        // if copying from a pack buffer to a non-staging native buffer, we must first
+        // copy through the staging buffer, because other native buffers can't be mapped
+        if (latestBuffer->getUsage() == BUFFER_USAGE_PIXEL_PACK && !directBuffer->isMappable())
+        {
+            NativeBuffer11 *stagingBuffer = getStagingBuffer();
+
+            stagingBuffer->copyFromStorage(latestBuffer, 0, latestBuffer->getSize(), 0);
+            directBuffer->setDataRevision(latestBuffer->getDataRevision());
+
+            latestBuffer = stagingBuffer;
+        }
+
+        // if copyFromStorage returns true, the D3D buffer has been recreated
+        // and we should update our serial
+        if (directBuffer->copyFromStorage(latestBuffer, 0, latestBuffer->getSize(), 0))
+        {
+            updateSerial();
+        }
+        directBuffer->setDataRevision(latestBuffer->getDataRevision());
+    }
+
+    return directBuffer;
+}
+
+Buffer11::BufferStorage11 *Buffer11::getLatestBufferStorage() const
+{
+    // Even though we iterate over all the direct buffers, it is expected that only
+    // 1 or 2 will be present.
+    BufferStorage11 *latestStorage = NULL;
+    DataRevision latestRevision = 0;
+    for (auto it = mBufferStorages.begin(); it != mBufferStorages.end(); it++)
+    {
+        BufferStorage11 *storage = it->second;
+        if (!latestStorage || storage->getDataRevision() > latestRevision)
+        {
+            latestStorage = storage;
+            latestRevision = storage->getDataRevision();
+        }
+    }
+
+    return latestStorage;
+}
+
+Buffer11::NativeBuffer11 *Buffer11::getStagingBuffer()
+{
+    BufferStorage11 *stagingStorage = getBufferStorage(BUFFER_USAGE_STAGING);
+
+    if (!stagingStorage)
+    {
+        // Out-of-memory
+        return NULL;
+    }
+
+    ASSERT(HAS_DYNAMIC_TYPE(NativeBuffer11*, stagingStorage));
+    return static_cast<NativeBuffer11*>(stagingStorage);
+}
+
+Buffer11::PackStorage11 *Buffer11::getPackStorage()
+{
+    BufferStorage11 *packStorage = getBufferStorage(BUFFER_USAGE_PIXEL_PACK);
+
+    if (!packStorage)
+    {
+        // Out-of-memory
+        return NULL;
+    }
+
+    ASSERT(HAS_DYNAMIC_TYPE(PackStorage11*, packStorage));
+    return static_cast<PackStorage11*>(packStorage);
+}
+
+bool Buffer11::supportsDirectBinding() const
+{
+    // Do not support direct buffers for dynamic data. The streaming buffer
+    // offers better performance for data which changes every frame.
+    // Check for absence of static buffer interfaces to detect dynamic data.
+    return (mStaticVertexBuffer && mStaticIndexBuffer);
+}
+
+Buffer11::BufferStorage11::BufferStorage11(Renderer11 *renderer, BufferUsage usage)
+    : mRenderer(renderer),
+      mUsage(usage),
+      mRevision(0),
+      mBufferSize(0)
+{
+}
+
+Buffer11::NativeBuffer11::NativeBuffer11(Renderer11 *renderer, BufferUsage usage)
+    : BufferStorage11(renderer, usage),
+      mNativeBuffer(NULL)
+{
+}
+
+Buffer11::NativeBuffer11::~NativeBuffer11()
+{
+    SafeRelease(mNativeBuffer);
+}
+
+// Returns true if it recreates the direct buffer
+bool Buffer11::NativeBuffer11::copyFromStorage(BufferStorage11 *source, size_t sourceOffset,
+                                               size_t size, size_t destOffset)
+{
+    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+    size_t requiredSize = sourceOffset + size;
+    bool createBuffer = !mNativeBuffer || mBufferSize < requiredSize;
+
+    // (Re)initialize D3D buffer if needed
+    if (createBuffer)
+    {
+        bool preserveData = (destOffset > 0);
+        resize(source->getSize(), preserveData);
+    }
+
+    if (source->getUsage() == BUFFER_USAGE_PIXEL_PACK)
+    {
+        ASSERT(HAS_DYNAMIC_TYPE(PackStorage11*, source));
+
+        void *sourcePointer = source->map(sourceOffset, size, GL_MAP_READ_BIT);
+
+        D3D11_MAPPED_SUBRESOURCE mappedResource;
+        HRESULT hr = context->Map(mNativeBuffer, 0, D3D11_MAP_WRITE, 0, &mappedResource);
+        UNUSED_ASSERTION_VARIABLE(hr);
+        ASSERT(SUCCEEDED(hr));
+
+        unsigned char *destPointer = static_cast<unsigned char *>(mappedResource.pData) + destOffset;
+
+        // Offset bounds are validated at the API layer
+        ASSERT(sourceOffset + size <= destOffset + mBufferSize);
+        memcpy(destPointer, sourcePointer, size);
+    }
+    else
+    {
+        ASSERT(HAS_DYNAMIC_TYPE(NativeBuffer11*, source));
+
+        D3D11_BOX srcBox;
+        srcBox.left = sourceOffset;
+        srcBox.right = sourceOffset + size;
+        srcBox.top = 0;
+        srcBox.bottom = 1;
+        srcBox.front = 0;
+        srcBox.back = 1;
+
+        ASSERT(HAS_DYNAMIC_TYPE(NativeBuffer11*, source));
+        ID3D11Buffer *sourceBuffer = static_cast<NativeBuffer11*>(source)->getNativeBuffer();
+
+        context->CopySubresourceRegion(mNativeBuffer, 0, destOffset, 0, 0, sourceBuffer, 0, &srcBox);
+    }
+
+    return createBuffer;
+}
+
+bool Buffer11::NativeBuffer11::resize(size_t size, bool preserveData)
+{
+    ID3D11Device *device = mRenderer->getDevice();
+    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+    D3D11_BUFFER_DESC bufferDesc;
+    fillBufferDesc(&bufferDesc, mRenderer, mUsage, size);
+
+    ID3D11Buffer *newBuffer;
+    HRESULT result = device->CreateBuffer(&bufferDesc, NULL, &newBuffer);
+
+    if (FAILED(result))
+    {
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    if (mNativeBuffer && preserveData)
+    {
+        // We don't call resize if the buffer is big enough already.
+        ASSERT(mBufferSize <= size);
+
+        D3D11_BOX srcBox;
+        srcBox.left = 0;
+        srcBox.right = mBufferSize;
+        srcBox.top = 0;
+        srcBox.bottom = 1;
+        srcBox.front = 0;
+        srcBox.back = 1;
+
+        context->CopySubresourceRegion(newBuffer, 0, 0, 0, 0, mNativeBuffer, 0, &srcBox);
+    }
+
+    // No longer need the old buffer
+    SafeRelease(mNativeBuffer);
+    mNativeBuffer = newBuffer;
+
+    mBufferSize = bufferDesc.ByteWidth;
+
+    return true;
+}
+
+void Buffer11::NativeBuffer11::fillBufferDesc(D3D11_BUFFER_DESC* bufferDesc, Renderer *renderer,
+                                                     BufferUsage usage, unsigned int bufferSize)
+{
+    bufferDesc->ByteWidth = bufferSize;
+    bufferDesc->MiscFlags = 0;
+    bufferDesc->StructureByteStride = 0;
+
+    switch (usage)
+    {
+      case BUFFER_USAGE_STAGING:
+        bufferDesc->Usage = D3D11_USAGE_STAGING;
+        bufferDesc->BindFlags = 0;
+        bufferDesc->CPUAccessFlags = D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE;
+        break;
+
+      case BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK:
+        bufferDesc->Usage = D3D11_USAGE_DEFAULT;
+        bufferDesc->BindFlags = D3D11_BIND_VERTEX_BUFFER;
+        if (!static_cast<Renderer11 *>(renderer)->isLevel9())
+            bufferDesc->BindFlags |= D3D11_BIND_STREAM_OUTPUT;
+        bufferDesc->CPUAccessFlags = 0;
+        break;
+
+      case BUFFER_USAGE_INDEX:
+        bufferDesc->Usage = D3D11_USAGE_DEFAULT;
+        bufferDesc->BindFlags = D3D11_BIND_INDEX_BUFFER;
+        bufferDesc->CPUAccessFlags = 0;
+        break;
+
+      case BUFFER_USAGE_PIXEL_UNPACK:
+        bufferDesc->Usage = D3D11_USAGE_DEFAULT;
+        bufferDesc->BindFlags = D3D11_BIND_SHADER_RESOURCE;
+        bufferDesc->CPUAccessFlags = 0;
+        break;
+
+      case BUFFER_USAGE_UNIFORM:
+        bufferDesc->Usage = D3D11_USAGE_DYNAMIC;
+        bufferDesc->BindFlags = D3D11_BIND_CONSTANT_BUFFER;
+        bufferDesc->CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+
+        // Constant buffers must be of a limited size, and aligned to 16 byte boundaries
+        // For our purposes we ignore any buffer data past the maximum constant buffer size
+        bufferDesc->ByteWidth = roundUp(bufferDesc->ByteWidth, 16u);
+        bufferDesc->ByteWidth = std::min<UINT>(bufferDesc->ByteWidth, renderer->getRendererCaps().maxUniformBlockSize);
+        break;
+
+    default:
+        UNREACHABLE();
+    }
+}
+
+void *Buffer11::NativeBuffer11::map(size_t offset, size_t length, GLbitfield access)
+{
+    ASSERT(mUsage == BUFFER_USAGE_STAGING);
+
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+    D3D11_MAP d3dMapType = gl_d3d11::GetD3DMapTypeFromBits(access);
+    UINT d3dMapFlag = ((access & GL_MAP_UNSYNCHRONIZED_BIT) != 0 ? D3D11_MAP_FLAG_DO_NOT_WAIT : 0);
+
+    HRESULT result = context->Map(mNativeBuffer, 0, d3dMapType, d3dMapFlag, &mappedResource);
+    UNUSED_ASSERTION_VARIABLE(result);
+    ASSERT(SUCCEEDED(result));
+
+    return static_cast<GLubyte*>(mappedResource.pData) + offset;
+}
+
+bool Buffer11::NativeBuffer11::setData(D3D11_MAP mapMode, const uint8_t *data, size_t size, size_t offset)
+{
+    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    HRESULT result = context->Map(mNativeBuffer, 0, mapMode, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    uint8_t *offsetBufferPointer = reinterpret_cast<uint8_t *>(mappedResource.pData) + offset;
+    memcpy(offsetBufferPointer, data, size);
+
+    context->Unmap(mNativeBuffer, 0);
+
+    return true;
+}
+
+void Buffer11::NativeBuffer11::unmap()
+{
+    ASSERT(mUsage == BUFFER_USAGE_STAGING);
+    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+    context->Unmap(mNativeBuffer, 0);
+}
+
+Buffer11::PackStorage11::PackStorage11(Renderer11 *renderer)
+    : BufferStorage11(renderer, BUFFER_USAGE_PIXEL_PACK),
+      mStagingTexture(NULL),
+      mTextureFormat(DXGI_FORMAT_UNKNOWN),
+      mQueuedPackCommand(NULL),
+      mDataModified(false)
+{
+}
+
+Buffer11::PackStorage11::~PackStorage11()
+{
+    SafeRelease(mStagingTexture);
+    SafeDelete(mQueuedPackCommand);
+}
+
+bool Buffer11::PackStorage11::copyFromStorage(BufferStorage11 *source, size_t sourceOffset,
+                                              size_t size, size_t destOffset)
+{
+    // We copy through a staging buffer when drawing with a pack buffer,
+    // or for other cases where we access the pack buffer
+    UNREACHABLE();
+    return false;
+}
+
+bool Buffer11::PackStorage11::resize(size_t size, bool preserveData)
+{
+    if (size != mBufferSize)
+    {
+        if (!mMemoryBuffer.resize(size))
+        {
+            return false;
+        }
+        mBufferSize = size;
+    }
+
+    return true;
+}
+
+void *Buffer11::PackStorage11::map(size_t offset, size_t length, GLbitfield access)
+{
+    ASSERT(offset + length <= getSize());
+    // TODO: fast path
+    //  We might be able to optimize out one or more memcpy calls by detecting when
+    //  and if D3D packs the staging texture memory identically to how we would fill
+    //  the pack buffer according to the current pack state.
+
+    flushQueuedPackCommand();
+    mDataModified = (mDataModified || (access & GL_MAP_WRITE_BIT) != 0);
+
+    return mMemoryBuffer.data() + offset;
+}
+
+void Buffer11::PackStorage11::unmap()
+{
+    // No-op
+}
+
+gl::Error Buffer11::PackStorage11::packPixels(ID3D11Texture2D *srcTexure, UINT srcSubresource, const PackPixelsParams &params)
+{
+    flushQueuedPackCommand();
+    mQueuedPackCommand = new PackPixelsParams(params);
+
+    D3D11_TEXTURE2D_DESC textureDesc;
+    srcTexure->GetDesc(&textureDesc);
+
+    if (mStagingTexture != NULL &&
+        (mTextureFormat != textureDesc.Format ||
+         mTextureSize.width != params.area.width ||
+         mTextureSize.height != params.area.height))
+    {
+        SafeRelease(mStagingTexture);
+        mTextureSize.width = 0;
+        mTextureSize.height = 0;
+        mTextureFormat = DXGI_FORMAT_UNKNOWN;
+    }
+
+    if (mStagingTexture == NULL)
+    {
+        ID3D11Device *device = mRenderer->getDevice();
+        HRESULT hr;
+
+        mTextureSize.width = params.area.width;
+        mTextureSize.height = params.area.height;
+        mTextureFormat = textureDesc.Format;
+
+        D3D11_TEXTURE2D_DESC stagingDesc;
+        stagingDesc.Width = params.area.width;
+        stagingDesc.Height = params.area.height;
+        stagingDesc.MipLevels = 1;
+        stagingDesc.ArraySize = 1;
+        stagingDesc.Format = mTextureFormat;
+        stagingDesc.SampleDesc.Count = 1;
+        stagingDesc.SampleDesc.Quality = 0;
+        stagingDesc.Usage = D3D11_USAGE_STAGING;
+        stagingDesc.BindFlags = 0;
+        stagingDesc.CPUAccessFlags = D3D11_CPU_ACCESS_READ;
+        stagingDesc.MiscFlags = 0;
+
+        hr = device->CreateTexture2D(&stagingDesc, NULL, &mStagingTexture);
+        if (FAILED(hr))
+        {
+            ASSERT(hr == E_OUTOFMEMORY);
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal staging texture.");
+        }
+    }
+
+    // ReadPixels from multisampled FBOs isn't supported in current GL
+    ASSERT(textureDesc.SampleDesc.Count <= 1);
+
+    ID3D11DeviceContext *immediateContext = mRenderer->getDeviceContext();
+    D3D11_BOX srcBox;
+    srcBox.left   = params.area.x;
+    srcBox.right  = params.area.x + params.area.width;
+    srcBox.top    = params.area.y;
+    srcBox.bottom = params.area.y + params.area.height;
+    srcBox.front  = 0;
+    srcBox.back   = 1;
+
+    // Asynchronous copy
+    immediateContext->CopySubresourceRegion(mStagingTexture, 0, 0, 0, 0, srcTexure, srcSubresource, &srcBox);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Buffer11::PackStorage11::flushQueuedPackCommand()
+{
+    ASSERT(mMemoryBuffer.size() > 0);
+
+    if (mQueuedPackCommand)
+    {
+        mRenderer->packPixels(mStagingTexture, *mQueuedPackCommand, mMemoryBuffer.data());
+        SafeDelete(mQueuedPackCommand);
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.h
new file mode 100644
index 0000000000..5f24fb4e2d
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.h
@@ -0,0 +1,105 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Buffer11.h: Defines the rx::Buffer11 class which implements rx::BufferImpl via rx::BufferD3D.
+
+#ifndef LIBGLESV2_RENDERER_BUFFER11_H_
+#define LIBGLESV2_RENDERER_BUFFER11_H_
+
+#include "libGLESv2/renderer/d3d/BufferD3D.h"
+#include "libGLESv2/renderer/d3d/MemoryBuffer.h"
+#include "libGLESv2/angletypes.h"
+
+namespace rx
+{
+class Renderer11;
+
+enum BufferUsage
+{
+    BUFFER_USAGE_STAGING,
+    BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK,
+    BUFFER_USAGE_INDEX,
+    BUFFER_USAGE_PIXEL_UNPACK,
+    BUFFER_USAGE_PIXEL_PACK,
+    BUFFER_USAGE_UNIFORM,
+};
+
+struct PackPixelsParams
+{
+    PackPixelsParams();
+    PackPixelsParams(const gl::Rectangle &area, GLenum format, GLenum type, GLuint outputPitch,
+                     const gl::PixelPackState &pack, ptrdiff_t offset);
+
+    gl::Rectangle area;
+    GLenum format;
+    GLenum type;
+    GLuint outputPitch;
+    gl::Buffer *packBuffer;
+    gl::PixelPackState pack;
+    ptrdiff_t offset;
+};
+
+typedef size_t DataRevision;
+
+class Buffer11 : public BufferD3D
+{
+  public:
+    Buffer11(rx::Renderer11 *renderer);
+    virtual ~Buffer11();
+
+    static Buffer11 *makeBuffer11(BufferImpl *buffer);
+
+    ID3D11Buffer *getBuffer(BufferUsage usage);
+    ID3D11ShaderResourceView *getSRV(DXGI_FORMAT srvFormat);
+    bool isMapped() const { return mMappedStorage != NULL; }
+    gl::Error packPixels(ID3D11Texture2D *srcTexure, UINT srcSubresource, const PackPixelsParams &params);
+
+    // BufferD3D implementation
+    virtual size_t getSize() const { return mSize; }
+    virtual bool supportsDirectBinding() const;
+    virtual Renderer* getRenderer();
+
+    // BufferImpl implementation
+    virtual gl::Error setData(const void* data, size_t size, GLenum usage);
+    virtual void *getData();
+    virtual gl::Error setSubData(const void* data, size_t size, size_t offset);
+    virtual gl::Error copySubData(BufferImpl* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size);
+    virtual gl::Error map(size_t offset, size_t length, GLbitfield access, GLvoid **mapPtr);
+    virtual gl::Error unmap();
+    virtual void markTransformFeedbackUsage();
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Buffer11);
+
+    class BufferStorage11;
+    class NativeBuffer11;
+    class PackStorage11;
+
+    rx::Renderer11 *mRenderer;
+    size_t mSize;
+
+    BufferStorage11 *mMappedStorage;
+
+    std::map<BufferUsage, BufferStorage11*> mBufferStorages;
+
+    typedef std::pair<ID3D11Buffer *, ID3D11ShaderResourceView *> BufferSRVPair;
+    std::map<DXGI_FORMAT, BufferSRVPair> mBufferResourceViews;
+
+    MemoryBuffer mResolvedData;
+    DataRevision mResolvedDataRevision;
+    unsigned int mReadUsageCount;
+
+    void markBufferUsage();
+    NativeBuffer11 *getStagingBuffer();
+    PackStorage11 *getPackStorage();
+
+    BufferStorage11 *getBufferStorage(BufferUsage usage);
+    BufferStorage11 *getLatestBufferStorage() const;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_BUFFER11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
new file mode 100644
index 0000000000..765d34fd3f
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
@@ -0,0 +1,555 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Clear11.cpp: Framebuffer clear utility class.
+
+#include "libGLESv2/renderer/d3d/d3d11/Clear11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderTarget11.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+
+// Precompiled shaders
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearfloatvs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearfloatps.h"
+
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearuintvs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearuintps.h"
+
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearsintvs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearsintps.h"
+
+namespace rx
+{
+
+template <typename T>
+static void ApplyVertices(const gl::Extents &framebufferSize, const gl::Rectangle *scissor, const gl::Color<T> &color, float depth, void *buffer)
+{
+    d3d11::PositionDepthColorVertex<T> *vertices = reinterpret_cast<d3d11::PositionDepthColorVertex<T>*>(buffer);
+
+    float depthClear = gl::clamp01(depth);
+    float left = -1.0f;
+    float right = 1.0f;
+    float top = -1.0f;
+    float bottom = 1.0f;
+
+    // Clip the quad coordinates to the scissor if needed
+    if (scissor != NULL)
+    {
+        left = std::max(left, (scissor->x / float(framebufferSize.width)) * 2.0f - 1.0f);
+        right = std::min(right, ((scissor->x + scissor->width) / float(framebufferSize.width)) * 2.0f - 1.0f);
+        top = std::max(top, ((framebufferSize.height - scissor->y - scissor->height) / float(framebufferSize.height)) * 2.0f - 1.0f);
+        bottom = std::min(bottom, ((framebufferSize.height - scissor->y) / float(framebufferSize.height)) * 2.0f - 1.0f);
+    }
+
+    d3d11::SetPositionDepthColorVertex<T>(vertices + 0, left,  bottom, depthClear, color);
+    d3d11::SetPositionDepthColorVertex<T>(vertices + 1, left,  top,    depthClear, color);
+    d3d11::SetPositionDepthColorVertex<T>(vertices + 2, right, bottom, depthClear, color);
+    d3d11::SetPositionDepthColorVertex<T>(vertices + 3, right, top,    depthClear, color);
+}
+
+template <unsigned int vsSize, unsigned int psSize>
+Clear11::ClearShader Clear11::CreateClearShader(ID3D11Device *device, DXGI_FORMAT colorType, const BYTE (&vsByteCode)[vsSize], const BYTE (&psByteCode)[psSize])
+{
+    HRESULT result;
+
+    ClearShader shader = { 0 };
+
+    D3D11_INPUT_ELEMENT_DESC quadLayout[] =
+    {
+        { "POSITION", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0,  0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+        { "COLOR",    0, colorType,                   0, 12, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+    };
+
+    result = device->CreateInputLayout(quadLayout, ArraySize(quadLayout), vsByteCode, vsSize, &shader.inputLayout);
+    ASSERT(SUCCEEDED(result));
+
+    result = device->CreateVertexShader(vsByteCode, vsSize, NULL, &shader.vertexShader);
+    ASSERT(SUCCEEDED(result));
+
+    result = device->CreatePixelShader(psByteCode, psSize, NULL, &shader.pixelShader);
+    ASSERT(SUCCEEDED(result));
+
+    return shader;
+}
+
+Clear11::Clear11(Renderer11 *renderer)
+    : mRenderer(renderer), mClearBlendStates(StructLessThan<ClearBlendInfo>), mClearDepthStencilStates(StructLessThan<ClearDepthStencilInfo>),
+      mVertexBuffer(NULL), mRasterizerState(NULL)
+{
+    HRESULT result;
+    ID3D11Device *device = renderer->getDevice();
+
+    D3D11_BUFFER_DESC vbDesc;
+    vbDesc.ByteWidth = sizeof(d3d11::PositionDepthColorVertex<float>) * 4;
+    vbDesc.Usage = D3D11_USAGE_DYNAMIC;
+    vbDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
+    vbDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+    vbDesc.MiscFlags = 0;
+    vbDesc.StructureByteStride = 0;
+
+    result = device->CreateBuffer(&vbDesc, NULL, &mVertexBuffer);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mVertexBuffer, "Clear11 masked clear vertex buffer");
+
+    D3D11_RASTERIZER_DESC rsDesc;
+    rsDesc.FillMode = D3D11_FILL_SOLID;
+    rsDesc.CullMode = D3D11_CULL_NONE;
+    rsDesc.FrontCounterClockwise = FALSE;
+    rsDesc.DepthBias = 0;
+    rsDesc.DepthBiasClamp = 0.0f;
+    rsDesc.SlopeScaledDepthBias = 0.0f;
+    rsDesc.DepthClipEnable = mRenderer->isLevel9();
+    rsDesc.ScissorEnable = FALSE;
+    rsDesc.MultisampleEnable = FALSE;
+    rsDesc.AntialiasedLineEnable = FALSE;
+
+    result = device->CreateRasterizerState(&rsDesc, &mRasterizerState);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mRasterizerState, "Clear11 masked clear rasterizer state");
+
+    mFloatClearShader = CreateClearShader(device, DXGI_FORMAT_R32G32B32A32_FLOAT, g_VS_ClearFloat, g_PS_ClearFloat);
+    if (mRenderer->isLevel9()) {
+        memset(&mUintClearShader, 0, sizeof(ClearShader));
+        memset(&mIntClearShader, 0, sizeof(ClearShader));
+        return;
+    }
+
+    mUintClearShader  = CreateClearShader(device, DXGI_FORMAT_R32G32B32A32_UINT,  g_VS_ClearUint,  g_PS_ClearUint );
+    mIntClearShader   = CreateClearShader(device, DXGI_FORMAT_R32G32B32A32_SINT,  g_VS_ClearSint,  g_PS_ClearSint );
+}
+
+Clear11::~Clear11()
+{
+    for (ClearBlendStateMap::iterator i = mClearBlendStates.begin(); i != mClearBlendStates.end(); i++)
+    {
+        SafeRelease(i->second);
+    }
+    mClearBlendStates.clear();
+
+    SafeRelease(mFloatClearShader.inputLayout);
+    SafeRelease(mFloatClearShader.vertexShader);
+    SafeRelease(mFloatClearShader.pixelShader);
+
+    SafeRelease(mUintClearShader.inputLayout);
+    SafeRelease(mUintClearShader.vertexShader);
+    SafeRelease(mUintClearShader.pixelShader);
+
+    SafeRelease(mIntClearShader.inputLayout);
+    SafeRelease(mIntClearShader.vertexShader);
+    SafeRelease(mIntClearShader.pixelShader);
+
+    for (ClearDepthStencilStateMap::iterator i = mClearDepthStencilStates.begin(); i != mClearDepthStencilStates.end(); i++)
+    {
+        SafeRelease(i->second);
+    }
+    mClearDepthStencilStates.clear();
+
+    SafeRelease(mVertexBuffer);
+    SafeRelease(mRasterizerState);
+}
+
+gl::Error Clear11::clearFramebuffer(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer)
+{
+    // First determine if a scissored clear is needed, this will always require drawing a quad.
+    //
+    // Otherwise, iterate over the color buffers which require clearing and determine if they can be
+    // cleared with ID3D11DeviceContext::ClearRenderTargetView... This requires:
+    // 1) The render target is being cleared to a float value (will be cast to integer when clearing integer
+    //    render targets as expected but does not work the other way around)
+    // 2) The format of the render target has no color channels that are currently masked out.
+    // Clear the easy-to-clear buffers on the spot and accumulate the ones that require special work.
+    //
+    // Also determine if the depth stencil can be cleared with ID3D11DeviceContext::ClearDepthStencilView
+    // by checking if the stencil write mask covers the entire stencil.
+    //
+    // To clear the remaining buffers, quads must be drawn containing an int, uint or float vertex color
+    // attribute.
+
+    gl::Extents framebufferSize;
+    if (frameBuffer->getFirstColorbuffer() != NULL)
+    {
+        gl::FramebufferAttachment *attachment = frameBuffer->getFirstColorbuffer();
+        framebufferSize.width = attachment->getWidth();
+        framebufferSize.height = attachment->getHeight();
+        framebufferSize.depth = 1;
+    }
+    else if (frameBuffer->getDepthOrStencilbuffer() != NULL)
+    {
+        gl::FramebufferAttachment *attachment = frameBuffer->getDepthOrStencilbuffer();
+        framebufferSize.width = attachment->getWidth();
+        framebufferSize.height = attachment->getHeight();
+        framebufferSize.depth = 1;
+    }
+    else
+    {
+        UNREACHABLE();
+        return gl::Error(GL_INVALID_OPERATION);
+    }
+
+    if (clearParams.scissorEnabled && (clearParams.scissor.x >= framebufferSize.width || 
+                                       clearParams.scissor.y >= framebufferSize.height ||
+                                       clearParams.scissor.x + clearParams.scissor.width <= 0 ||
+                                       clearParams.scissor.y + clearParams.scissor.height <= 0))
+    {
+        // Scissor is enabled and the scissor rectangle is outside the renderbuffer
+        return gl::Error(GL_NO_ERROR);
+    }
+
+    bool needScissoredClear = clearParams.scissorEnabled && (clearParams.scissor.x > 0 || clearParams.scissor.y > 0 ||
+                                                             clearParams.scissor.x + clearParams.scissor.width < framebufferSize.width ||
+                                                             clearParams.scissor.y + clearParams.scissor.height < framebufferSize.height);
+
+    std::vector<MaskedRenderTarget> maskedClearRenderTargets;
+    RenderTarget11* maskedClearDepthStencil = NULL;
+
+    ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+    for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
+    {
+        if (clearParams.clearColor[colorAttachment] && frameBuffer->isEnabledColorAttachment(colorAttachment))
+        {
+            gl::FramebufferAttachment *attachment = frameBuffer->getColorbuffer(colorAttachment);
+            if (attachment)
+            {
+                RenderTarget11 *renderTarget = d3d11::GetAttachmentRenderTarget(attachment);
+                if (!renderTarget)
+                {
+                    return gl::Error(GL_OUT_OF_MEMORY, "Internal render target view pointer unexpectedly null.");
+                }
+
+                const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(attachment->getInternalFormat());
+
+                if (clearParams.colorClearType == GL_FLOAT &&
+                    !(formatInfo.componentType == GL_FLOAT || formatInfo.componentType == GL_UNSIGNED_NORMALIZED || formatInfo.componentType == GL_SIGNED_NORMALIZED))
+                {
+                    ERR("It is undefined behaviour to clear a render buffer which is not normalized fixed point or floating-"
+                        "point to floating point values (color attachment %u has internal format 0x%X).", colorAttachment,
+                        attachment->getInternalFormat());
+                }
+
+                if ((formatInfo.redBits == 0 || !clearParams.colorMaskRed) &&
+                    (formatInfo.greenBits == 0 || !clearParams.colorMaskGreen) &&
+                    (formatInfo.blueBits == 0 || !clearParams.colorMaskBlue) &&
+                    (formatInfo.alphaBits == 0 || !clearParams.colorMaskAlpha))
+                {
+                    // Every channel either does not exist in the render target or is masked out
+                    continue;
+                }
+                else if (needScissoredClear || clearParams.colorClearType != GL_FLOAT ||
+                         (formatInfo.redBits   > 0 && !clearParams.colorMaskRed)   ||
+                         (formatInfo.greenBits > 0 && !clearParams.colorMaskGreen) ||
+                         (formatInfo.blueBits  > 0 && !clearParams.colorMaskBlue) ||
+                         (formatInfo.alphaBits > 0 && !clearParams.colorMaskAlpha))
+                {
+                    // A scissored or masked clear is required
+                    MaskedRenderTarget maskAndRt;
+                    bool clearColor = clearParams.clearColor[colorAttachment];
+                    maskAndRt.colorMask[0] = (clearColor && clearParams.colorMaskRed);
+                    maskAndRt.colorMask[1] = (clearColor && clearParams.colorMaskGreen);
+                    maskAndRt.colorMask[2] = (clearColor && clearParams.colorMaskBlue);
+                    maskAndRt.colorMask[3] = (clearColor && clearParams.colorMaskAlpha);
+                    maskAndRt.renderTarget = renderTarget;
+                    maskedClearRenderTargets.push_back(maskAndRt);
+                }
+                else
+                {
+                    // ID3D11DeviceContext::ClearRenderTargetView is possible
+
+                    ID3D11RenderTargetView *framebufferRTV = renderTarget->getRenderTargetView();
+                    if (!framebufferRTV)
+                    {
+                        return gl::Error(GL_OUT_OF_MEMORY, "Internal render target view pointer unexpectedly null.");
+                    }
+
+                    const gl::InternalFormat &actualFormatInfo = gl::GetInternalFormatInfo(attachment->getActualFormat());
+
+                    // Check if the actual format has a channel that the internal format does not and set them to the
+                    // default values
+                    const float clearValues[4] =
+                    {
+                        ((formatInfo.redBits == 0 && actualFormatInfo.redBits   > 0) ? 0.0f : clearParams.colorFClearValue.red),
+                        ((formatInfo.greenBits == 0 && actualFormatInfo.greenBits > 0) ? 0.0f : clearParams.colorFClearValue.green),
+                        ((formatInfo.blueBits == 0 && actualFormatInfo.blueBits  > 0) ? 0.0f : clearParams.colorFClearValue.blue),
+                        ((formatInfo.alphaBits == 0 && actualFormatInfo.alphaBits > 0) ? 1.0f : clearParams.colorFClearValue.alpha),
+                    };
+
+                    deviceContext->ClearRenderTargetView(framebufferRTV, clearValues);
+                }
+            }
+        }
+    }
+
+    if (clearParams.clearDepth || clearParams.clearStencil)
+    {
+        gl::FramebufferAttachment *attachment = frameBuffer->getDepthOrStencilbuffer();
+        if (attachment)
+        {
+            RenderTarget11 *renderTarget = d3d11::GetAttachmentRenderTarget(attachment);
+            if (!renderTarget)
+            {
+                return gl::Error(GL_OUT_OF_MEMORY, "Internal depth stencil view pointer unexpectedly null.");
+            }
+
+            const gl::InternalFormat &actualFormatInfo = gl::GetInternalFormatInfo(attachment->getActualFormat());
+
+            unsigned int stencilUnmasked = frameBuffer->hasStencil() ? (1 << actualFormatInfo.stencilBits) - 1 : 0;
+            bool needMaskedStencilClear = clearParams.clearStencil && (clearParams.stencilWriteMask & stencilUnmasked) != stencilUnmasked;
+
+            if (needScissoredClear || needMaskedStencilClear)
+            {
+                maskedClearDepthStencil = renderTarget;
+            }
+            else
+            {
+                ID3D11DepthStencilView *framebufferDSV = renderTarget->getDepthStencilView();
+                if (!framebufferDSV)
+                {
+                    return gl::Error(GL_OUT_OF_MEMORY, "Internal depth stencil view pointer unexpectedly null.");
+                }
+
+                UINT clearFlags = (clearParams.clearDepth   ? D3D11_CLEAR_DEPTH   : 0) |
+                                  (clearParams.clearStencil ? D3D11_CLEAR_STENCIL : 0);
+                FLOAT depthClear = gl::clamp01(clearParams.depthClearValue);
+                UINT8 stencilClear = clearParams.stencilClearValue & 0xFF;
+
+                deviceContext->ClearDepthStencilView(framebufferDSV, clearFlags, depthClear, stencilClear);
+            }
+        }
+    }
+
+    if (maskedClearRenderTargets.size() > 0 || maskedClearDepthStencil)
+    {
+        // To clear the render targets and depth stencil in one pass:
+        //
+        // Render a quad clipped to the scissor rectangle which draws the clear color and a blend
+        // state that will perform the required color masking.
+        //
+        // The quad's depth is equal to the depth clear value with a depth stencil state that
+        // will enable or disable depth test/writes if the depth buffer should be cleared or not.
+        //
+        // The rasterizer state's stencil is set to always pass or fail based on if the stencil
+        // should be cleared or not with a stencil write mask of the stencil clear value.
+        //
+        // ======================================================================================
+        //
+        // Luckily, the gl spec (ES 3.0.2 pg 183) states that the results of clearing a render-
+        // buffer that is not normalized fixed point or floating point with floating point values
+        // are undefined so we can just write floats to them and D3D11 will bit cast them to
+        // integers.
+        //
+        // Also, we don't have to worry about attempting to clear a normalized fixed/floating point
+        // buffer with integer values because there is no gl API call which would allow it,
+        // glClearBuffer* calls only clear a single renderbuffer at a time which is verified to
+        // be a compatible clear type.
+
+        // Bind all the render targets which need clearing
+        ASSERT(maskedClearRenderTargets.size() <= mRenderer->getRendererCaps().maxDrawBuffers);
+        std::vector<ID3D11RenderTargetView*> rtvs(maskedClearRenderTargets.size());
+        for (unsigned int i = 0; i < maskedClearRenderTargets.size(); i++)
+        {
+            RenderTarget11 *renderTarget = maskedClearRenderTargets[i].renderTarget;
+            ID3D11RenderTargetView *rtv = renderTarget->getRenderTargetView();
+            if (!rtv)
+            {
+                return gl::Error(GL_OUT_OF_MEMORY, "Internal render target view pointer unexpectedly null.");
+            }
+
+            rtvs[i] = rtv;
+        }
+        ID3D11DepthStencilView *dsv = maskedClearDepthStencil ? maskedClearDepthStencil->getDepthStencilView() : NULL;
+
+        ID3D11BlendState *blendState = getBlendState(maskedClearRenderTargets);
+        const FLOAT blendFactors[4] = { 1.0f, 1.0f, 1.0f, 1.0f };
+        const UINT sampleMask = 0xFFFFFFFF;
+
+        ID3D11DepthStencilState *dsState = getDepthStencilState(clearParams);
+        const UINT stencilClear = clearParams.stencilClearValue & 0xFF;
+
+        // Set the vertices
+        UINT vertexStride = 0;
+        const UINT startIdx = 0;
+        const ClearShader* shader = NULL;
+        D3D11_MAPPED_SUBRESOURCE mappedResource;
+        HRESULT result = deviceContext->Map(mVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal masked clear vertex buffer, HRESULT: 0x%X.", result);
+        }
+
+        const gl::Rectangle *scissorPtr = clearParams.scissorEnabled ? &clearParams.scissor : NULL;
+        switch (clearParams.colorClearType)
+        {
+          case GL_FLOAT:
+            ApplyVertices(framebufferSize, scissorPtr, clearParams.colorFClearValue, clearParams.depthClearValue, mappedResource.pData);
+            vertexStride = sizeof(d3d11::PositionDepthColorVertex<float>);
+            shader = &mFloatClearShader;
+            break;
+
+          case GL_UNSIGNED_INT:
+            ApplyVertices(framebufferSize, scissorPtr, clearParams.colorUIClearValue, clearParams.depthClearValue, mappedResource.pData);
+            vertexStride = sizeof(d3d11::PositionDepthColorVertex<unsigned int>);
+            shader = &mUintClearShader;
+            break;
+
+          case GL_INT:
+            ApplyVertices(framebufferSize, scissorPtr, clearParams.colorIClearValue, clearParams.depthClearValue, mappedResource.pData);
+            vertexStride = sizeof(d3d11::PositionDepthColorVertex<int>);
+            shader = &mIntClearShader;
+            break;
+
+          default:
+            UNREACHABLE();
+            break;
+        }
+
+        deviceContext->Unmap(mVertexBuffer, 0);
+
+        // Set the viewport to be the same size as the framebuffer
+        D3D11_VIEWPORT viewport;
+        viewport.TopLeftX = 0;
+        viewport.TopLeftY = 0;
+        viewport.Width = framebufferSize.width;
+        viewport.Height = framebufferSize.height;
+        viewport.MinDepth = 0;
+        viewport.MaxDepth = 1;
+        deviceContext->RSSetViewports(1, &viewport);
+
+        // Apply state
+        deviceContext->OMSetBlendState(blendState, blendFactors, sampleMask);
+        deviceContext->OMSetDepthStencilState(dsState, stencilClear);
+        deviceContext->RSSetState(mRasterizerState);
+
+        // Apply shaders
+        deviceContext->IASetInputLayout(shader->inputLayout);
+        deviceContext->VSSetShader(shader->vertexShader, NULL, 0);
+        deviceContext->PSSetShader(shader->pixelShader, NULL, 0);
+        deviceContext->GSSetShader(NULL, NULL, 0);
+
+        // Apply vertex buffer
+        deviceContext->IASetVertexBuffers(0, 1, &mVertexBuffer, &vertexStride, &startIdx);
+        deviceContext->IASetPrimitiveTopology(D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP);
+
+        // Apply render targets
+        deviceContext->OMSetRenderTargets(rtvs.size(), (rtvs.empty() ? NULL : &rtvs[0]), dsv);
+
+        // Draw the clear quad
+        deviceContext->Draw(4, 0);
+
+        // Clean up
+        mRenderer->markAllStateDirty();
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+ID3D11BlendState *Clear11::getBlendState(const std::vector<MaskedRenderTarget>& rts)
+{
+    ClearBlendInfo blendKey = { 0 };
+    for (unsigned int i = 0; i < D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT; i++)
+    {
+        if (i < rts.size())
+        {
+            RenderTarget11 *rt = rts[i].renderTarget;
+            const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(rt->getInternalFormat());
+
+            blendKey.maskChannels[i][0] = (rts[i].colorMask[0] && formatInfo.redBits   > 0);
+            blendKey.maskChannels[i][1] = (rts[i].colorMask[1] && formatInfo.greenBits > 0);
+            blendKey.maskChannels[i][2] = (rts[i].colorMask[2] && formatInfo.blueBits  > 0);
+            blendKey.maskChannels[i][3] = (rts[i].colorMask[3] && formatInfo.alphaBits > 0);
+        }
+        else
+        {
+            blendKey.maskChannels[i][0] = false;
+            blendKey.maskChannels[i][1] = false;
+            blendKey.maskChannels[i][2] = false;
+            blendKey.maskChannels[i][3] = false;
+        }
+    }
+
+    ClearBlendStateMap::const_iterator i = mClearBlendStates.find(blendKey);
+    if (i != mClearBlendStates.end())
+    {
+        return i->second;
+    }
+    else
+    {
+        D3D11_BLEND_DESC blendDesc = { 0 };
+        blendDesc.AlphaToCoverageEnable = FALSE;
+        blendDesc.IndependentBlendEnable = (rts.size() > 1) ? TRUE : FALSE;
+
+        for (unsigned int i = 0; i < D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT; i++)
+        {
+            blendDesc.RenderTarget[i].BlendEnable = FALSE;
+            blendDesc.RenderTarget[i].RenderTargetWriteMask = gl_d3d11::ConvertColorMask(blendKey.maskChannels[i][0],
+                                                                                         blendKey.maskChannels[i][1],
+                                                                                         blendKey.maskChannels[i][2],
+                                                                                         blendKey.maskChannels[i][3]);
+        }
+
+        ID3D11Device *device = mRenderer->getDevice();
+        ID3D11BlendState* blendState = NULL;
+        HRESULT result = device->CreateBlendState(&blendDesc, &blendState);
+        if (FAILED(result) || !blendState)
+        {
+            ERR("Unable to create a ID3D11BlendState, HRESULT: 0x%X.", result);
+            return NULL;
+        }
+
+        mClearBlendStates[blendKey] = blendState;
+
+        return blendState;
+    }
+}
+
+ID3D11DepthStencilState *Clear11::getDepthStencilState(const gl::ClearParameters &clearParams)
+{
+    ClearDepthStencilInfo dsKey = { 0 };
+    dsKey.clearDepth = clearParams.clearDepth;
+    dsKey.clearStencil = clearParams.clearStencil;
+    dsKey.stencilWriteMask = clearParams.stencilWriteMask & 0xFF;
+
+    ClearDepthStencilStateMap::const_iterator i = mClearDepthStencilStates.find(dsKey);
+    if (i != mClearDepthStencilStates.end())
+    {
+        return i->second;
+    }
+    else
+    {
+        D3D11_DEPTH_STENCIL_DESC dsDesc = { 0 };
+        dsDesc.DepthEnable = dsKey.clearDepth ? TRUE : FALSE;
+        dsDesc.DepthWriteMask = dsKey.clearDepth ? D3D11_DEPTH_WRITE_MASK_ALL : D3D11_DEPTH_WRITE_MASK_ZERO;
+        dsDesc.DepthFunc = D3D11_COMPARISON_ALWAYS;
+        dsDesc.StencilEnable = dsKey.clearStencil ? TRUE : FALSE;
+        dsDesc.StencilReadMask = 0;
+        dsDesc.StencilWriteMask = dsKey.stencilWriteMask;
+        dsDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_REPLACE;
+        dsDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_REPLACE;
+        dsDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_REPLACE;
+        dsDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
+        dsDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_REPLACE;
+        dsDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_REPLACE;
+        dsDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_REPLACE;
+        dsDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
+
+        ID3D11Device *device = mRenderer->getDevice();
+        ID3D11DepthStencilState* dsState = NULL;
+        HRESULT result = device->CreateDepthStencilState(&dsDesc, &dsState);
+        if (FAILED(result) || !dsState)
+        {
+            ERR("Unable to create a ID3D11DepthStencilState, HRESULT: 0x%X.", result);
+            return NULL;
+        }
+
+        mClearDepthStencilStates[dsKey] = dsState;
+
+        return dsState;
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.h
new file mode 100644
index 0000000000..be8e187c40
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.h
@@ -0,0 +1,87 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Clear11.h: Framebuffer clear utility class.
+
+#ifndef LIBGLESV2_RENDERER_CLEAR11_H_
+#define LIBGLESV2_RENDERER_CLEAR11_H_
+
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/Error.h"
+
+#include <map>
+#include <vector>
+
+namespace gl
+{
+class Framebuffer;
+}
+
+namespace rx
+{
+class Renderer11;
+class RenderTarget11;
+
+class Clear11
+{
+  public:
+    explicit Clear11(Renderer11 *renderer);
+    ~Clear11();
+
+    // Clears the framebuffer with the supplied clear parameters, assumes that the framebuffer is currently applied.
+    gl::Error clearFramebuffer(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer);
+
+  private:
+    Renderer11 *mRenderer;
+
+    struct ClearBlendInfo
+    {
+        bool maskChannels[D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT][4];
+    };
+    typedef bool (*ClearBlendInfoComparisonFunction)(const ClearBlendInfo&, const ClearBlendInfo &);
+    typedef std::map<ClearBlendInfo, ID3D11BlendState*, ClearBlendInfoComparisonFunction> ClearBlendStateMap;
+    ClearBlendStateMap mClearBlendStates;
+
+    struct MaskedRenderTarget
+    {
+        bool colorMask[4];
+        RenderTarget11 *renderTarget;
+    };
+
+    ID3D11BlendState *getBlendState(const std::vector<MaskedRenderTarget> &rts);
+
+    struct ClearShader
+    {
+        ID3D11InputLayout *inputLayout;
+        ID3D11VertexShader *vertexShader;
+        ID3D11PixelShader *pixelShader;
+    };
+    ClearShader mFloatClearShader;
+    ClearShader mUintClearShader;
+    ClearShader mIntClearShader;
+
+    template <unsigned int vsSize, unsigned int psSize>
+    static ClearShader CreateClearShader(ID3D11Device *device, DXGI_FORMAT colorType, const BYTE (&vsByteCode)[vsSize], const BYTE (&psByteCode)[psSize]);
+
+    struct ClearDepthStencilInfo
+    {
+        bool clearDepth;
+        bool clearStencil;
+        UINT8 stencilWriteMask;
+    };
+    typedef bool (*ClearDepthStencilInfoComparisonFunction)(const ClearDepthStencilInfo&, const ClearDepthStencilInfo &);
+    typedef std::map<ClearDepthStencilInfo, ID3D11DepthStencilState*, ClearDepthStencilInfoComparisonFunction> ClearDepthStencilStateMap;
+    ClearDepthStencilStateMap mClearDepthStencilStates;
+
+    ID3D11DepthStencilState *getDepthStencilState(const gl::ClearParameters &clearParams);
+
+    ID3D11Buffer *mVertexBuffer;
+    ID3D11RasterizerState *mRasterizerState;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_CLEAR11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Fence11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Fence11.cpp
new file mode 100644
index 0000000000..a841b52862
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Fence11.cpp
@@ -0,0 +1,70 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Fence11.cpp: Defines the rx::Fence11 class which implements rx::FenceImpl.
+
+#include "libGLESv2/renderer/d3d/d3d11/Fence11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+Fence11::Fence11(rx::Renderer11 *renderer)
+{
+    mRenderer = renderer;
+    mQuery = NULL;
+}
+
+Fence11::~Fence11()
+{
+    SafeRelease(mQuery);
+}
+
+bool Fence11::isSet() const
+{
+    return mQuery != NULL;
+}
+
+void Fence11::set()
+{
+    if (!mQuery)
+    {
+        D3D11_QUERY_DESC queryDesc;
+        queryDesc.Query = D3D11_QUERY_EVENT;
+        queryDesc.MiscFlags = 0;
+
+        if (FAILED(mRenderer->getDevice()->CreateQuery(&queryDesc, &mQuery)))
+        {
+            return gl::error(GL_OUT_OF_MEMORY);
+        }
+    }
+
+    mRenderer->getDeviceContext()->End(mQuery);
+}
+
+bool Fence11::test(bool flushCommandBuffer)
+{
+    ASSERT(mQuery);
+
+    UINT getDataFlags = (flushCommandBuffer ? 0 : D3D11_ASYNC_GETDATA_DONOTFLUSH);
+    HRESULT result = mRenderer->getDeviceContext()->GetData(mQuery, NULL, 0, getDataFlags);
+
+    if (mRenderer->isDeviceLost())
+    {
+       return gl::error(GL_OUT_OF_MEMORY, true);
+    }
+
+    ASSERT(result == S_OK || result == S_FALSE);
+    return (result == S_OK);
+}
+
+bool Fence11::hasError() const
+{
+    return mRenderer->isDeviceLost();
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Fence11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Fence11.h
index a5398bca14..50c7621776 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Fence11.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Fence11.h
@@ -21,11 +21,10 @@ class Fence11 : public FenceImpl
     explicit Fence11(rx::Renderer11 *renderer);
     virtual ~Fence11();
 
-    GLboolean isFence();
-    void setFence(GLenum condition);
-    GLboolean testFence();
-    void finishFence();
-    void getFenceiv(GLenum pname, GLint *params);
+    bool isSet() const;
+    void set();
+    bool test(bool flushCommandBuffer);
+    bool hasError() const;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Fence11);
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Image11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Image11.cpp
new file mode 100644
index 0000000000..7536713af4
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Image11.cpp
@@ -0,0 +1,569 @@
+//
+// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Image11.h: Implements the rx::Image11 class, which acts as the interface to
+// the actual underlying resources of a Texture
+
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Image11.h"
+#include "libGLESv2/renderer/d3d/d3d11/TextureStorage11.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/main.h"
+
+#include "common/utilities.h"
+
+namespace rx
+{
+
+Image11::Image11()
+{
+    mStagingTexture = NULL;
+    mRenderer = NULL;
+    mDXGIFormat = DXGI_FORMAT_UNKNOWN;
+    mRecoverFromStorage = false;
+    mAssociatedStorage = NULL;
+    mAssociatedStorageLevel = 0;
+    mAssociatedStorageLayerTarget = 0;
+    mRecoveredFromStorageCount = 0;
+}
+
+Image11::~Image11()
+{
+    disassociateStorage();
+    releaseStagingTexture();
+}
+
+Image11 *Image11::makeImage11(Image *img)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(rx::Image11*, img));
+    return static_cast<rx::Image11*>(img);
+}
+
+void Image11::generateMipmap(Image11 *dest, Image11 *src)
+{
+    ASSERT(src->getDXGIFormat() == dest->getDXGIFormat());
+    ASSERT(src->getWidth() == 1 || src->getWidth() / 2 == dest->getWidth());
+    ASSERT(src->getHeight() == 1 || src->getHeight() / 2 == dest->getHeight());
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(src->getDXGIFormat());
+    ASSERT(dxgiFormatInfo.mipGenerationFunction != NULL);
+
+    D3D11_MAPPED_SUBRESOURCE destMapped;
+    HRESULT destMapResult = dest->map(D3D11_MAP_WRITE, &destMapped);
+    if (FAILED(destMapResult))
+    {
+        ERR("Failed to map destination image for mip map generation. HRESULT:0x%X", destMapResult);
+        return;
+    }
+
+    D3D11_MAPPED_SUBRESOURCE srcMapped;
+    HRESULT srcMapResult = src->map(D3D11_MAP_READ, &srcMapped);
+    if (FAILED(srcMapResult))
+    {
+        ERR("Failed to map source image for mip map generation. HRESULT:0x%X", srcMapResult);
+
+        dest->unmap();
+        return;
+    }
+
+    const uint8_t *sourceData = reinterpret_cast<const uint8_t*>(srcMapped.pData);
+    uint8_t *destData = reinterpret_cast<uint8_t*>(destMapped.pData);
+
+    dxgiFormatInfo.mipGenerationFunction(src->getWidth(), src->getHeight(), src->getDepth(),
+                                         sourceData, srcMapped.RowPitch, srcMapped.DepthPitch,
+                                         destData, destMapped.RowPitch, destMapped.DepthPitch);
+
+    dest->unmap();
+    src->unmap();
+
+    dest->markDirty();
+}
+
+bool Image11::isDirty() const
+{
+    // If mDirty is true
+    // AND mStagingTexture doesn't exist AND mStagingTexture doesn't need to be recovered from TextureStorage
+    // AND the texture doesn't require init data (i.e. a blank new texture will suffice)
+    // then isDirty should still return false.
+    if (mDirty && !mStagingTexture && !mRecoverFromStorage && !(d3d11::GetTextureFormatInfo(mInternalFormat).dataInitializerFunction != NULL))
+    {
+        return false;
+    }
+
+    return mDirty;
+}
+
+bool Image11::copyToStorage2D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+{
+    TextureStorage11_2D *storage11 = TextureStorage11_2D::makeTextureStorage11_2D(storage);
+    return copyToStorageImpl(storage11, level, 0, xoffset, yoffset, width, height);
+}
+
+bool Image11::copyToStorageCube(TextureStorage *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+{
+    TextureStorage11_Cube *storage11 = TextureStorage11_Cube::makeTextureStorage11_Cube(storage);
+    return copyToStorageImpl(storage11, level, face, xoffset, yoffset, width, height);
+}
+
+bool Image11::copyToStorage3D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth)
+{
+    TextureStorage11_3D *storage11 = TextureStorage11_3D::makeTextureStorage11_3D(storage);
+    return copyToStorageImpl(storage11, level, 0, xoffset, yoffset, width, height);
+}
+
+bool Image11::copyToStorage2DArray(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint arrayLayer, GLsizei width, GLsizei height)
+{
+    TextureStorage11_2DArray *storage11 = TextureStorage11_2DArray::makeTextureStorage11_2DArray(storage);
+    return copyToStorageImpl(storage11, level, arrayLayer, xoffset, yoffset, width, height);
+}
+
+bool Image11::copyToStorageImpl(TextureStorage11 *storage11, int level, int layerTarget, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+{
+    // If an app's behavior results in an Image11 copying its data to/from to a TextureStorage multiple times,
+    // then we should just keep the staging texture around to prevent the copying from impacting perf.
+    // We allow the Image11 to copy its data to/from TextureStorage once.
+    // This accounts for an app making a late call to glGenerateMipmap.
+    bool attemptToReleaseStagingTexture = (mRecoveredFromStorageCount < 2);
+
+    if (attemptToReleaseStagingTexture)
+    {
+        // If another image is relying on this Storage for its data, then we must let it recover its data before we overwrite it.
+        storage11->releaseAssociatedImage(level, layerTarget, this);
+    }
+
+    bool updateSubresourceSuccess = storage11->updateSubresourceLevel(getStagingTexture(), getStagingSubresource(), level, layerTarget, xoffset, yoffset, 0, width, height, 1);
+
+    // Once the image data has been copied into the Storage, we can release it locally.
+    if (attemptToReleaseStagingTexture && updateSubresourceSuccess)
+    {
+        storage11->associateImage(this, level, layerTarget);
+        releaseStagingTexture();
+        mRecoverFromStorage = true;
+        mAssociatedStorage = storage11;
+        mAssociatedStorageLevel = level;
+        mAssociatedStorageLayerTarget = layerTarget;
+    }
+
+    return updateSubresourceSuccess;
+}
+
+bool Image11::isAssociatedStorageValid(TextureStorage11* textureStorage) const
+{
+    return (mAssociatedStorage == textureStorage);
+}
+
+bool Image11::recoverFromAssociatedStorage()
+{
+    if (mRecoverFromStorage)
+    {
+        createStagingTexture();
+
+        bool textureStorageCorrect = mAssociatedStorage->isAssociatedImageValid(mAssociatedStorageLevel, mAssociatedStorageLayerTarget, this);
+
+        // This means that the cached TextureStorage has been modified after this Image11 released its copy of its data. 
+        // This should not have happened. The TextureStorage should have told this Image11 to recover its data before it was overwritten.
+        ASSERT(textureStorageCorrect);
+
+        if (textureStorageCorrect)
+        {
+            // CopySubResource from the Storage to the Staging texture
+            mAssociatedStorage->copySubresourceLevel(mStagingTexture, mStagingSubresource, mAssociatedStorageLevel, mAssociatedStorageLayerTarget, 0, 0, 0, mWidth, mHeight, mDepth);
+            mRecoveredFromStorageCount += 1;
+        }
+
+        // Reset all the recovery parameters, even if the texture storage association is broken.
+        disassociateStorage();
+
+        return textureStorageCorrect;
+    }
+
+    return false;
+}
+
+void Image11::disassociateStorage()
+{
+    if (mRecoverFromStorage)
+    {
+        // Make the texturestorage release the Image11 too
+        mAssociatedStorage->disassociateImage(mAssociatedStorageLevel, mAssociatedStorageLayerTarget, this);
+
+        mRecoverFromStorage = false;
+        mAssociatedStorage = NULL;
+        mAssociatedStorageLevel = 0;
+        mAssociatedStorageLayerTarget = 0;
+    }
+}
+
+bool Image11::redefine(Renderer *renderer, GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, bool forceRelease)
+{
+    if (mWidth != width ||
+        mHeight != height ||
+        mInternalFormat != internalformat ||
+        forceRelease)
+    {
+        // End the association with the TextureStorage, since that data will be out of date.
+        // Also reset mRecoveredFromStorageCount since this Image is getting completely redefined.
+        disassociateStorage();
+        mRecoveredFromStorageCount = 0;
+
+        mRenderer = Renderer11::makeRenderer11(renderer);
+
+        mWidth = width;
+        mHeight = height;
+        mDepth = depth;
+        mInternalFormat = internalformat;
+        mTarget = target;
+
+        // compute the d3d format that will be used
+        const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalformat);
+        const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(formatInfo.texFormat);
+        mDXGIFormat = formatInfo.texFormat;
+        mActualFormat = dxgiFormatInfo.internalFormat;
+        mRenderable = (formatInfo.rtvFormat != DXGI_FORMAT_UNKNOWN);
+
+        SafeRelease(mStagingTexture);
+        mDirty = (formatInfo.dataInitializerFunction != NULL);
+
+        return true;
+    }
+
+    return false;
+}
+
+DXGI_FORMAT Image11::getDXGIFormat() const
+{
+    // this should only happen if the image hasn't been redefined first
+    // which would be a bug by the caller
+    ASSERT(mDXGIFormat != DXGI_FORMAT_UNKNOWN);
+
+    return mDXGIFormat;
+}
+
+// Store the pixel rectangle designated by xoffset,yoffset,width,height with pixels stored as format/type at input
+// into the target pixel rectangle.
+void Image11::loadData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                       GLint unpackAlignment, GLenum type, const void *input)
+{
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(mInternalFormat);
+    GLsizei inputRowPitch = formatInfo.computeRowPitch(type, width, unpackAlignment);
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(type, width, height, unpackAlignment);
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(mDXGIFormat);
+    GLuint outputPixelSize = dxgiFormatInfo.pixelBytes;
+
+    const d3d11::TextureFormat &d3dFormatInfo = d3d11::GetTextureFormatInfo(mInternalFormat);
+    LoadImageFunction loadFunction = d3dFormatInfo.loadFunctions.at(type);
+
+    D3D11_MAPPED_SUBRESOURCE mappedImage;
+    HRESULT result = map(D3D11_MAP_WRITE, &mappedImage);
+    if (FAILED(result))
+    {
+        ERR("Could not map image for loading.");
+        return;
+    }
+
+    uint8_t* offsetMappedData = (reinterpret_cast<uint8_t*>(mappedImage.pData) + (yoffset * mappedImage.RowPitch + xoffset * outputPixelSize + zoffset * mappedImage.DepthPitch));
+    loadFunction(width, height, depth,
+                 reinterpret_cast<const uint8_t*>(input), inputRowPitch, inputDepthPitch,
+                 offsetMappedData, mappedImage.RowPitch, mappedImage.DepthPitch);
+
+    unmap();
+}
+
+void Image11::loadCompressedData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                                 const void *input)
+{
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(mInternalFormat);
+    GLsizei inputRowPitch = formatInfo.computeRowPitch(GL_UNSIGNED_BYTE, width, 1);
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(GL_UNSIGNED_BYTE, width, height, 1);
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(mDXGIFormat);
+    GLuint outputPixelSize = dxgiFormatInfo.pixelBytes;
+    GLuint outputBlockWidth = dxgiFormatInfo.blockWidth;
+    GLuint outputBlockHeight = dxgiFormatInfo.blockHeight;
+
+    ASSERT(xoffset % outputBlockWidth == 0);
+    ASSERT(yoffset % outputBlockHeight == 0);
+
+    const d3d11::TextureFormat &d3dFormatInfo = d3d11::GetTextureFormatInfo(mInternalFormat);
+    LoadImageFunction loadFunction = d3dFormatInfo.loadFunctions.at(GL_UNSIGNED_BYTE);
+
+    D3D11_MAPPED_SUBRESOURCE mappedImage;
+    HRESULT result = map(D3D11_MAP_WRITE, &mappedImage);
+    if (FAILED(result))
+    {
+        ERR("Could not map image for loading.");
+        return;
+    }
+
+    uint8_t* offsetMappedData = reinterpret_cast<uint8_t*>(mappedImage.pData) + ((yoffset / outputBlockHeight) * mappedImage.RowPitch +
+                                                                           (xoffset / outputBlockWidth) * outputPixelSize +
+                                                                           zoffset * mappedImage.DepthPitch);
+
+    loadFunction(width, height, depth,
+                 reinterpret_cast<const uint8_t*>(input), inputRowPitch, inputDepthPitch,
+                 offsetMappedData, mappedImage.RowPitch, mappedImage.DepthPitch);
+
+    unmap();
+}
+
+void Image11::copy(GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+{
+    gl::FramebufferAttachment *colorbuffer = source->getReadColorbuffer();
+
+    if (colorbuffer && colorbuffer->getActualFormat() == mActualFormat)
+    {
+        // No conversion needed-- use copyback fastpath
+        ID3D11Texture2D *colorBufferTexture = NULL;
+        unsigned int subresourceIndex = 0;
+
+        if (mRenderer->getRenderTargetResource(colorbuffer, &subresourceIndex, &colorBufferTexture))
+        {
+            D3D11_TEXTURE2D_DESC textureDesc;
+            colorBufferTexture->GetDesc(&textureDesc);
+
+            ID3D11Device *device = mRenderer->getDevice();
+            ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+            ID3D11Texture2D* srcTex = NULL;
+            if (textureDesc.SampleDesc.Count > 1)
+            {
+                D3D11_TEXTURE2D_DESC resolveDesc;
+                resolveDesc.Width = textureDesc.Width;
+                resolveDesc.Height = textureDesc.Height;
+                resolveDesc.MipLevels = 1;
+                resolveDesc.ArraySize = 1;
+                resolveDesc.Format = textureDesc.Format;
+                resolveDesc.SampleDesc.Count = 1;
+                resolveDesc.SampleDesc.Quality = 0;
+                resolveDesc.Usage = D3D11_USAGE_DEFAULT;
+                resolveDesc.BindFlags = 0;
+                resolveDesc.CPUAccessFlags = 0;
+                resolveDesc.MiscFlags = 0;
+
+                HRESULT result = device->CreateTexture2D(&resolveDesc, NULL, &srcTex);
+                if (FAILED(result))
+                {
+                    ERR("Failed to create resolve texture for Image11::copy, HRESULT: 0x%X.", result);
+                    return;
+                }
+
+                deviceContext->ResolveSubresource(srcTex, 0, colorBufferTexture, subresourceIndex, textureDesc.Format);
+                subresourceIndex = 0;
+            }
+            else
+            {
+                srcTex = colorBufferTexture;
+                srcTex->AddRef();
+            }
+
+            D3D11_BOX srcBox;
+            srcBox.left = x;
+            srcBox.right = x + width;
+            srcBox.top = y;
+            srcBox.bottom = y + height;
+            srcBox.front = 0;
+            srcBox.back = 1;
+
+            deviceContext->CopySubresourceRegion(mStagingTexture, 0, xoffset, yoffset, zoffset, srcTex, subresourceIndex, &srcBox);
+
+            SafeRelease(srcTex);
+            SafeRelease(colorBufferTexture);
+        }
+    }
+    else
+    {
+        // This format requires conversion, so we must copy the texture to staging and manually convert via readPixels
+        D3D11_MAPPED_SUBRESOURCE mappedImage;
+        HRESULT result = map(D3D11_MAP_WRITE, &mappedImage);
+        if (FAILED(result))
+        {
+            ERR("Failed to map texture for Image11::copy, HRESULT: 0x%X.", result);
+            return;
+        }
+
+        // determine the offset coordinate into the destination buffer
+        GLsizei rowOffset = gl::GetInternalFormatInfo(mActualFormat).pixelBytes * xoffset;
+        uint8_t *dataOffset = static_cast<uint8_t*>(mappedImage.pData) + mappedImage.RowPitch * yoffset + rowOffset + zoffset * mappedImage.DepthPitch;
+
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(mInternalFormat);
+
+        mRenderer->readPixels(source, x, y, width, height, formatInfo.format, formatInfo.type, mappedImage.RowPitch, gl::PixelPackState(), dataOffset);
+
+        unmap();
+    }
+}
+
+ID3D11Resource *Image11::getStagingTexture()
+{
+    createStagingTexture();
+
+    return mStagingTexture;
+}
+
+void Image11::releaseStagingTexture()
+{
+    SafeRelease(mStagingTexture);
+}
+
+unsigned int Image11::getStagingSubresource()
+{
+    createStagingTexture();
+
+    return mStagingSubresource;
+}
+
+void Image11::createStagingTexture()
+{
+    if (mStagingTexture)
+    {
+        return;
+    }
+
+    const DXGI_FORMAT dxgiFormat = getDXGIFormat();
+
+    if (mWidth > 0 && mHeight > 0 && mDepth > 0)
+    {
+        ID3D11Device *device = mRenderer->getDevice();
+        HRESULT result;
+
+        int lodOffset = 1;
+        GLsizei width = mWidth;
+        GLsizei height = mHeight;
+
+        // adjust size if needed for compressed textures
+        d3d11::MakeValidSize(false, dxgiFormat, &width, &height, &lodOffset);
+
+        if (mTarget == GL_TEXTURE_3D)
+        {
+            ID3D11Texture3D *newTexture = NULL;
+
+            D3D11_TEXTURE3D_DESC desc;
+            desc.Width = width;
+            desc.Height = height;
+            desc.Depth = mDepth;
+            desc.MipLevels = lodOffset + 1;
+            desc.Format = dxgiFormat;
+            desc.Usage = D3D11_USAGE_STAGING;
+            desc.BindFlags = 0;
+            desc.CPUAccessFlags = D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE;
+            desc.MiscFlags = 0;
+
+            if (d3d11::GetTextureFormatInfo(mInternalFormat).dataInitializerFunction != NULL)
+            {
+                std::vector<D3D11_SUBRESOURCE_DATA> initialData;
+                std::vector< std::vector<BYTE> > textureData;
+                d3d11::GenerateInitialTextureData(mInternalFormat, width, height, mDepth,
+                                                  lodOffset + 1, &initialData, &textureData);
+
+                result = device->CreateTexture3D(&desc, initialData.data(), &newTexture);
+            }
+            else
+            {
+                result = device->CreateTexture3D(&desc, NULL, &newTexture);
+            }
+
+            if (FAILED(result))
+            {
+                ASSERT(result == E_OUTOFMEMORY);
+                ERR("Creating image failed.");
+                return gl::error(GL_OUT_OF_MEMORY);
+            }
+
+            mStagingTexture = newTexture;
+            mStagingSubresource = D3D11CalcSubresource(lodOffset, 0, lodOffset + 1);
+        }
+        else if (mTarget == GL_TEXTURE_2D || mTarget == GL_TEXTURE_2D_ARRAY || mTarget == GL_TEXTURE_CUBE_MAP)
+        {
+            ID3D11Texture2D *newTexture = NULL;
+
+            D3D11_TEXTURE2D_DESC desc;
+            desc.Width = width;
+            desc.Height = height;
+            desc.MipLevels = lodOffset + 1;
+            desc.ArraySize = 1;
+            desc.Format = dxgiFormat;
+            desc.SampleDesc.Count = 1;
+            desc.SampleDesc.Quality = 0;
+            desc.Usage = D3D11_USAGE_STAGING;
+            desc.BindFlags = 0;
+            desc.CPUAccessFlags = D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE;
+            desc.MiscFlags = 0;
+
+            if (d3d11::GetTextureFormatInfo(mInternalFormat).dataInitializerFunction != NULL)
+            {
+                std::vector<D3D11_SUBRESOURCE_DATA> initialData;
+                std::vector< std::vector<BYTE> > textureData;
+                d3d11::GenerateInitialTextureData(mInternalFormat, width, height, 1,
+                                                  lodOffset + 1, &initialData, &textureData);
+
+                result = device->CreateTexture2D(&desc, initialData.data(), &newTexture);
+            }
+            else
+            {
+                result = device->CreateTexture2D(&desc, NULL, &newTexture);
+            }
+
+            if (FAILED(result))
+            {
+                ASSERT(result == E_OUTOFMEMORY);
+                ERR("Creating image failed.");
+                return gl::error(GL_OUT_OF_MEMORY);
+            }
+
+            mStagingTexture = newTexture;
+            mStagingSubresource = D3D11CalcSubresource(lodOffset, 0, lodOffset + 1);
+        }
+        else
+        {
+            UNREACHABLE();
+        }
+    }
+
+    mDirty = false;
+}
+
+HRESULT Image11::map(D3D11_MAP mapType, D3D11_MAPPED_SUBRESOURCE *map)
+{
+    createStagingTexture();
+
+    // We must recover from the TextureStorage if necessary, even for D3D11_MAP_WRITE.
+    recoverFromAssociatedStorage();
+
+    HRESULT result = E_FAIL;
+
+    if (mStagingTexture)
+    {
+        ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+        result = deviceContext->Map(mStagingTexture, mStagingSubresource, mapType, 0, map);
+
+        // this can fail if the device is removed (from TDR)
+        if (d3d11::isDeviceLostError(result))
+        {
+            mRenderer->notifyDeviceLost();
+        }
+        else if (SUCCEEDED(result))
+        {
+            mDirty = true;
+        }
+    }
+
+    return result;
+}
+
+void Image11::unmap()
+{
+    if (mStagingTexture)
+    {
+        ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+        deviceContext->Unmap(mStagingTexture, mStagingSubresource);
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Image11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Image11.h
new file mode 100644
index 0000000000..a76a61f036
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Image11.h
@@ -0,0 +1,89 @@
+//
+// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Image11.h: Defines the rx::Image11 class, which acts as the interface to
+// the actual underlying resources of a Texture
+
+#ifndef LIBGLESV2_RENDERER_IMAGE11_H_
+#define LIBGLESV2_RENDERER_IMAGE11_H_
+
+#include "libGLESv2/renderer/d3d/ImageD3D.h"
+
+#include "common/debug.h"
+
+namespace gl
+{
+class Framebuffer;
+}
+
+namespace rx
+{
+class Renderer;
+class Renderer11;
+class TextureStorage11;
+
+class Image11 : public ImageD3D
+{
+  public:
+    Image11();
+    virtual ~Image11();
+
+    static Image11 *makeImage11(Image *img);
+
+    static void generateMipmap(Image11 *dest, Image11 *src);
+
+    virtual bool isDirty() const;
+
+    virtual bool copyToStorage2D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+    virtual bool copyToStorageCube(TextureStorage *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+    virtual bool copyToStorage3D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
+    virtual bool copyToStorage2DArray(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint arrayLayer, GLsizei width, GLsizei height);
+
+    virtual bool redefine(Renderer *renderer, GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, bool forceRelease);
+
+    DXGI_FORMAT getDXGIFormat() const;
+    
+    virtual void loadData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                          GLint unpackAlignment, GLenum type, const void *input);
+    virtual void loadCompressedData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                                    const void *input);
+
+    virtual void copy(GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+
+    bool recoverFromAssociatedStorage();
+    bool isAssociatedStorageValid(TextureStorage11* textureStorage) const;
+    void disassociateStorage();
+
+  protected:
+    HRESULT map(D3D11_MAP mapType, D3D11_MAPPED_SUBRESOURCE *map);
+    void unmap();
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Image11);
+
+    bool copyToStorageImpl(TextureStorage11 *storage11, int level, int layerTarget, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+
+    ID3D11Resource *getStagingTexture();
+    unsigned int getStagingSubresource();
+    void createStagingTexture();
+    void releaseStagingTexture();
+
+    Renderer11 *mRenderer;
+
+    DXGI_FORMAT mDXGIFormat;
+    ID3D11Resource *mStagingTexture;
+    unsigned int mStagingSubresource;
+
+    bool mRecoverFromStorage;
+    TextureStorage11 *mAssociatedStorage;
+    int mAssociatedStorageLevel;
+    int mAssociatedStorageLayerTarget;
+    unsigned int mRecoveredFromStorageCount;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_IMAGE11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.cpp
new file mode 100644
index 0000000000..9a61182ee9
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.cpp
@@ -0,0 +1,162 @@
+//
+// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// IndexBuffer11.cpp: Defines the D3D11 IndexBuffer implementation.
+
+#include "libGLESv2/renderer/d3d/d3d11/IndexBuffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+
+namespace rx
+{
+
+IndexBuffer11::IndexBuffer11(Renderer11 *const renderer) : mRenderer(renderer)
+{
+    mBuffer = NULL;
+    mBufferSize = 0;
+    mDynamicUsage = false;
+}
+
+IndexBuffer11::~IndexBuffer11()
+{
+    SafeRelease(mBuffer);
+}
+
+gl::Error IndexBuffer11::initialize(unsigned int bufferSize, GLenum indexType, bool dynamic)
+{
+    SafeRelease(mBuffer);
+
+    updateSerial();
+
+    if (bufferSize > 0)
+    {
+        ID3D11Device* dxDevice = mRenderer->getDevice();
+
+        D3D11_BUFFER_DESC bufferDesc;
+        bufferDesc.ByteWidth = bufferSize;
+        bufferDesc.Usage = D3D11_USAGE_DYNAMIC;
+        bufferDesc.BindFlags = D3D11_BIND_INDEX_BUFFER;
+        bufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+        bufferDesc.MiscFlags = 0;
+        bufferDesc.StructureByteStride = 0;
+
+        HRESULT result = dxDevice->CreateBuffer(&bufferDesc, NULL, &mBuffer);
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal index buffer of size, %lu.", bufferSize);
+        }
+    }
+
+    mBufferSize = bufferSize;
+    mIndexType = indexType;
+    mDynamicUsage = dynamic;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+IndexBuffer11 *IndexBuffer11::makeIndexBuffer11(IndexBuffer *indexBuffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(IndexBuffer11*, indexBuffer));
+    return static_cast<IndexBuffer11*>(indexBuffer);
+}
+
+gl::Error IndexBuffer11::mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory)
+{
+    if (!mBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal index buffer is not initialized.");
+    }
+
+    // Check for integer overflows and out-out-bounds map requests
+    if (offset + size < offset || offset + size > mBufferSize)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Index buffer map range is not inside the buffer.");
+    }
+
+    ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
+
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_NO_OVERWRITE, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal index buffer, HRESULT: 0x%08x.", result);
+    }
+
+    *outMappedMemory = reinterpret_cast<char*>(mappedResource.pData) + offset;
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error IndexBuffer11::unmapBuffer()
+{
+    if (!mBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal index buffer is not initialized.");
+    }
+
+    ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
+    dxContext->Unmap(mBuffer, 0);
+    return gl::Error(GL_NO_ERROR);
+}
+
+GLenum IndexBuffer11::getIndexType() const
+{
+    return mIndexType;
+}
+
+unsigned int IndexBuffer11::getBufferSize() const
+{
+    return mBufferSize;
+}
+
+gl::Error IndexBuffer11::setSize(unsigned int bufferSize, GLenum indexType)
+{
+    if (bufferSize > mBufferSize || indexType != mIndexType)
+    {
+        return initialize(bufferSize, indexType, mDynamicUsage);
+    }
+    else
+    {
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+gl::Error IndexBuffer11::discard()
+{
+    if (!mBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal index buffer is not initialized.");
+    }
+
+    ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
+
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal index buffer, HRESULT: 0x%08x.", result);
+    }
+
+    dxContext->Unmap(mBuffer, 0);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+DXGI_FORMAT IndexBuffer11::getIndexFormat() const
+{
+    switch (mIndexType)
+    {
+      case GL_UNSIGNED_BYTE:    return DXGI_FORMAT_R16_UINT;
+      case GL_UNSIGNED_SHORT:   return DXGI_FORMAT_R16_UINT;
+      case GL_UNSIGNED_INT:     return DXGI_FORMAT_R32_UINT;
+      default: UNREACHABLE();   return DXGI_FORMAT_UNKNOWN;
+    }
+}
+
+ID3D11Buffer *IndexBuffer11::getBuffer() const
+{
+    return mBuffer;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/IndexBuffer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.h
index 39a61946ad..f7c2b38e7e 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/IndexBuffer11.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.h
@@ -9,7 +9,7 @@
 #ifndef LIBGLESV2_RENDERER_INDEXBUFFER11_H_
 #define LIBGLESV2_RENDERER_INDEXBUFFER11_H_
 
-#include "libGLESv2/renderer/IndexBuffer.h"
+#include "libGLESv2/renderer/d3d/IndexBuffer.h"
 
 namespace rx
 {
@@ -21,18 +21,18 @@ class IndexBuffer11 : public IndexBuffer
     explicit IndexBuffer11(Renderer11 *const renderer);
     virtual ~IndexBuffer11();
 
-    virtual bool initialize(unsigned int bufferSize, GLenum indexType, bool dynamic);
+    virtual gl::Error initialize(unsigned int bufferSize, GLenum indexType, bool dynamic);
 
     static IndexBuffer11 *makeIndexBuffer11(IndexBuffer *indexBuffer);
 
-    virtual bool mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory);
-    virtual bool unmapBuffer();
+    virtual gl::Error mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory);
+    virtual gl::Error unmapBuffer();
 
     virtual GLenum getIndexType() const;
     virtual unsigned int getBufferSize() const;
-    virtual bool setSize(unsigned int bufferSize, GLenum indexType);
+    virtual gl::Error setSize(unsigned int bufferSize, GLenum indexType);
 
-    virtual bool discard();
+    virtual gl::Error discard();
 
     DXGI_FORMAT getIndexFormat() const;
     ID3D11Buffer *getBuffer() const;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp
index 4940b8c638..d835e4fa68 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -8,19 +7,35 @@
 // InputLayoutCache.cpp: Defines InputLayoutCache, a class that builds and caches
 // D3D11 input layouts.
 
-#include "libGLESv2/renderer/d3d11/InputLayoutCache.h"
-#include "libGLESv2/renderer/d3d11/VertexBuffer11.h"
-#include "libGLESv2/renderer/d3d11/BufferStorage11.h"
-#include "libGLESv2/renderer/d3d11/ShaderExecutable11.h"
+#include "libGLESv2/renderer/d3d/d3d11/InputLayoutCache.h"
+#include "libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Buffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/VertexDataManager.h"
 #include "libGLESv2/ProgramBinary.h"
-#include "libGLESv2/Context.h"
-#include "libGLESv2/renderer/VertexDataManager.h"
+#include "libGLESv2/VertexAttribute.h"
 
 #include "third_party/murmurhash/MurmurHash3.h"
 
 namespace rx
 {
 
+static void GetInputLayout(const TranslatedAttribute translatedAttributes[gl::MAX_VERTEX_ATTRIBS],
+                           gl::VertexFormat inputLayout[gl::MAX_VERTEX_ATTRIBS])
+{
+    for (unsigned int attributeIndex = 0; attributeIndex < gl::MAX_VERTEX_ATTRIBS; attributeIndex++)
+    {
+        const TranslatedAttribute &translatedAttribute = translatedAttributes[attributeIndex];
+
+        if (translatedAttributes[attributeIndex].active)
+        {
+            inputLayout[attributeIndex] = gl::VertexFormat(*translatedAttribute.attribute,
+                                                           translatedAttribute.currentValueType);
+        }
+    }
+}
+
 const unsigned int InputLayoutCache::kMaxInputLayouts = 1024;
 
 InputLayoutCache::InputLayoutCache() : mInputLayoutMap(kMaxInputLayouts, hashInputLayout, compareInputLayouts)
@@ -31,7 +46,7 @@ InputLayoutCache::InputLayoutCache() : mInputLayoutMap(kMaxInputLayouts, hashInp
     mCurrentIL = NULL;
     for (unsigned int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
     {
-        mCurrentBuffers[i] = -1;
+        mCurrentBuffers[i] = NULL;
         mCurrentVertexStrides[i] = -1;
         mCurrentVertexOffsets[i] = -1;
     }
@@ -53,7 +68,7 @@ void InputLayoutCache::clear()
 {
     for (InputLayoutMap::iterator i = mInputLayoutMap.begin(); i != mInputLayoutMap.end(); i++)
     {
-        i->second.inputLayout->Release();
+        SafeRelease(i->second.inputLayout);
     }
     mInputLayoutMap.clear();
     markDirty();
@@ -64,42 +79,36 @@ void InputLayoutCache::markDirty()
     mCurrentIL = NULL;
     for (unsigned int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
     {
-        mCurrentBuffers[i] = -1;
+        mCurrentBuffers[i] = NULL;
         mCurrentVertexStrides[i] = -1;
         mCurrentVertexOffsets[i] = -1;
     }
 }
 
-GLenum InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS],
-                                            gl::ProgramBinary *programBinary)
+gl::Error InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS],
+                                               gl::ProgramBinary *programBinary)
 {
     int sortedSemanticIndices[gl::MAX_VERTEX_ATTRIBS];
     programBinary->sortAttributesByLayout(attributes, sortedSemanticIndices);
 
     if (!mDevice || !mDeviceContext)
     {
-        ERR("InputLayoutCache is not initialized.");
-        return GL_INVALID_OPERATION;
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal input layout cache is not initialized.");
     }
 
     InputLayoutKey ilKey = { 0 };
 
-    ID3D11Buffer *vertexBuffers[gl::MAX_VERTEX_ATTRIBS] = { NULL };
-    unsigned int vertexBufferSerials[gl::MAX_VERTEX_ATTRIBS] = { 0 };
-    UINT vertexStrides[gl::MAX_VERTEX_ATTRIBS] = { 0 };
-    UINT vertexOffsets[gl::MAX_VERTEX_ATTRIBS] = { 0 };
-
     static const char* semanticName = "TEXCOORD";
 
     for (unsigned int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
     {
         if (attributes[i].active)
         {
-            VertexBuffer11 *vertexBuffer = VertexBuffer11::makeVertexBuffer11(attributes[i].vertexBuffer);
-            BufferStorage11 *bufferStorage = attributes[i].storage ? BufferStorage11::makeBufferStorage11(attributes[i].storage) : NULL;
-
             D3D11_INPUT_CLASSIFICATION inputClass = attributes[i].divisor > 0 ? D3D11_INPUT_PER_INSTANCE_DATA : D3D11_INPUT_PER_VERTEX_DATA;
 
+            gl::VertexFormat vertexFormat(*attributes[i].attribute, attributes[i].currentValueType);
+            const d3d11::VertexFormat &vertexFormatInfo = d3d11::GetVertexFormatInfo(vertexFormat);
+
             // Record the type of the associated vertex shader vector in our key
             // This will prevent mismatched vertex shaders from using the same input layout
             GLint attributeSize;
@@ -107,31 +116,28 @@ GLenum InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::M
 
             ilKey.elements[ilKey.elementCount].desc.SemanticName = semanticName;
             ilKey.elements[ilKey.elementCount].desc.SemanticIndex = i;
-            ilKey.elements[ilKey.elementCount].desc.Format = attributes[i].attribute->mArrayEnabled ? vertexBuffer->getDXGIFormat(*attributes[i].attribute) : DXGI_FORMAT_R32G32B32A32_FLOAT;
+            ilKey.elements[ilKey.elementCount].desc.Format = vertexFormatInfo.nativeFormat;
             ilKey.elements[ilKey.elementCount].desc.InputSlot = i;
             ilKey.elements[ilKey.elementCount].desc.AlignedByteOffset = 0;
             ilKey.elements[ilKey.elementCount].desc.InputSlotClass = inputClass;
             ilKey.elements[ilKey.elementCount].desc.InstanceDataStepRate = attributes[i].divisor;
             ilKey.elementCount++;
-
-            vertexBuffers[i] = bufferStorage ? bufferStorage->getBuffer(BUFFER_USAGE_VERTEX) : vertexBuffer->getBuffer();
-            vertexBufferSerials[i] = bufferStorage ? bufferStorage->getSerial() : vertexBuffer->getSerial();
-            vertexStrides[i] = attributes[i].stride;
-            vertexOffsets[i] = attributes[i].offset;
         }
     }
 
     ID3D11InputLayout *inputLayout = NULL;
 
-    InputLayoutMap::iterator i = mInputLayoutMap.find(ilKey);
-    if (i != mInputLayoutMap.end())
+    InputLayoutMap::iterator keyIter = mInputLayoutMap.find(ilKey);
+    if (keyIter != mInputLayoutMap.end())
     {
-        inputLayout = i->second.inputLayout;
-        i->second.lastUsedTime = mCounter++;
+        inputLayout = keyIter->second.inputLayout;
+        keyIter->second.lastUsedTime = mCounter++;
     }
     else
     {
-        ShaderExecutable11 *shader = ShaderExecutable11::makeShaderExecutable11(programBinary->getVertexExecutable());
+        gl::VertexFormat shaderInputLayout[gl::MAX_VERTEX_ATTRIBS];
+        GetInputLayout(attributes, shaderInputLayout);
+        ShaderExecutable11 *shader = ShaderExecutable11::makeShaderExecutable11(programBinary->getVertexExecutableForInputLayout(shaderInputLayout));
 
         D3D11_INPUT_ELEMENT_DESC descs[gl::MAX_VERTEX_ATTRIBS];
         for (unsigned int j = 0; j < ilKey.elementCount; ++j)
@@ -142,8 +148,7 @@ GLenum InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::M
         HRESULT result = mDevice->CreateInputLayout(descs, ilKey.elementCount, shader->getFunction(), shader->getLength(), &inputLayout);
         if (FAILED(result))
         {
-            ERR("Failed to crate input layout, result: 0x%08x", result);
-            return GL_INVALID_OPERATION;
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to create internal input layout, HRESULT: 0x%08x", result);
         }
 
         if (mInputLayoutMap.size() >= kMaxInputLayouts)
@@ -159,7 +164,7 @@ GLenum InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::M
                     leastRecentlyUsed = i;
                 }
             }
-            leastRecentlyUsed->second.inputLayout->Release();
+            SafeRelease(leastRecentlyUsed->second.inputLayout);
             mInputLayoutMap.erase(leastRecentlyUsed);
         }
 
@@ -176,19 +181,46 @@ GLenum InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::M
         mCurrentIL = inputLayout;
     }
 
+    bool dirtyBuffers = false;
+    size_t minDiff = gl::MAX_VERTEX_ATTRIBS;
+    size_t maxDiff = 0;
     for (unsigned int i = 0; i < gl::MAX_VERTEX_ATTRIBS; i++)
     {
-        if (vertexBufferSerials[i] != mCurrentBuffers[i] || vertexStrides[i] != mCurrentVertexStrides[i] ||
-            vertexOffsets[i] != mCurrentVertexOffsets[i])
+        ID3D11Buffer *buffer = NULL;
+
+        if (attributes[i].active)
+        {
+            VertexBuffer11 *vertexBuffer = VertexBuffer11::makeVertexBuffer11(attributes[i].vertexBuffer);
+            Buffer11 *bufferStorage = attributes[i].storage ? Buffer11::makeBuffer11(attributes[i].storage) : NULL;
+
+            buffer = bufferStorage ? bufferStorage->getBuffer(BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK)
+                                   : vertexBuffer->getBuffer();
+        }
+
+        UINT vertexStride = attributes[i].stride;
+        UINT vertexOffset = attributes[i].offset;
+
+        if (buffer != mCurrentBuffers[i] || vertexStride != mCurrentVertexStrides[i] ||
+            vertexOffset != mCurrentVertexOffsets[i])
         {
-            mDeviceContext->IASetVertexBuffers(i, 1, &vertexBuffers[i], &vertexStrides[i], &vertexOffsets[i]);
-            mCurrentBuffers[i] = vertexBufferSerials[i];
-            mCurrentVertexStrides[i] = vertexStrides[i];
-            mCurrentVertexOffsets[i] = vertexOffsets[i];
+            dirtyBuffers = true;
+            minDiff = std::min(minDiff, static_cast<size_t>(i));
+            maxDiff = std::max(maxDiff, static_cast<size_t>(i));
+
+            mCurrentBuffers[i] = buffer;
+            mCurrentVertexStrides[i] = vertexStride;
+            mCurrentVertexOffsets[i] = vertexOffset;
         }
     }
 
-    return GL_NO_ERROR;
+    if (dirtyBuffers)
+    {
+        ASSERT(minDiff <= maxDiff && maxDiff < gl::MAX_VERTEX_ATTRIBS);
+        mDeviceContext->IASetVertexBuffers(minDiff, maxDiff - minDiff + 1, mCurrentBuffers + minDiff,
+                                           mCurrentVertexStrides + minDiff, mCurrentVertexOffsets + minDiff);
+    }
+
+    return gl::Error(GL_NO_ERROR);
 }
 
 std::size_t InputLayoutCache::hashInputLayout(const InputLayoutKey &inputLayout)
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.h
index bb1a8eebcf..cc71ac3f6f 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.h
@@ -11,8 +11,14 @@
 #define LIBGLESV2_RENDERER_INPUTLAYOUTCACHE_H_
 
 #include "libGLESv2/Constants.h"
+#include "libGLESv2/Error.h"
 #include "common/angleutils.h"
 
+#include <GLES2/gl2.h>
+
+#include <cstddef>
+#include <unordered_map>
+
 namespace gl
 {
 class ProgramBinary;
@@ -32,8 +38,8 @@ class InputLayoutCache
     void clear();
     void markDirty();
 
-    GLenum applyVertexBuffers(TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS],
-                              gl::ProgramBinary *programBinary);
+    gl::Error applyVertexBuffers(TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS],
+                                 gl::ProgramBinary *programBinary);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(InputLayoutCache);
@@ -67,7 +73,7 @@ class InputLayoutCache
     };
 
     ID3D11InputLayout *mCurrentIL;
-    unsigned int mCurrentBuffers[gl::MAX_VERTEX_ATTRIBS];
+    ID3D11Buffer *mCurrentBuffers[gl::MAX_VERTEX_ATTRIBS];
     UINT mCurrentVertexStrides[gl::MAX_VERTEX_ATTRIBS];
     UINT mCurrentVertexOffsets[gl::MAX_VERTEX_ATTRIBS];
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
new file mode 100644
index 0000000000..a4e84f91c2
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
@@ -0,0 +1,252 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// PixelTransfer11.cpp:
+//   Implementation for buffer-to-texture and texture-to-buffer copies.
+//   Used to implement pixel transfers from unpack and to pack buffers.
+//
+
+#include "libGLESv2/renderer/d3d/d3d11/PixelTransfer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Buffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/TextureStorage11.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderTarget11.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/Context.h"
+
+// Precompiled shaders
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexturevs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexturegs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture_4fps.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture_4ips.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture_4uips.h"
+
+namespace rx
+{
+
+PixelTransfer11::PixelTransfer11(Renderer11 *renderer)
+    : mRenderer(renderer),
+      mBufferToTextureVS(NULL),
+      mBufferToTextureGS(NULL),
+      mParamsConstantBuffer(NULL),
+      mCopyRasterizerState(NULL),
+      mCopyDepthStencilState(NULL)
+{
+    HRESULT result = S_OK;
+    ID3D11Device *device = mRenderer->getDevice();
+
+    D3D11_RASTERIZER_DESC rasterDesc;
+    rasterDesc.FillMode = D3D11_FILL_SOLID;
+    rasterDesc.CullMode = D3D11_CULL_NONE;
+    rasterDesc.FrontCounterClockwise = FALSE;
+    rasterDesc.DepthBias = 0;
+    rasterDesc.SlopeScaledDepthBias = 0.0f;
+    rasterDesc.DepthBiasClamp = 0.0f;
+    rasterDesc.DepthClipEnable = TRUE;
+    rasterDesc.ScissorEnable = FALSE;
+    rasterDesc.MultisampleEnable = FALSE;
+    rasterDesc.AntialiasedLineEnable = FALSE;
+
+    result = device->CreateRasterizerState(&rasterDesc, &mCopyRasterizerState);
+    ASSERT(SUCCEEDED(result));
+
+    D3D11_DEPTH_STENCIL_DESC depthStencilDesc;
+    depthStencilDesc.DepthEnable = true;
+    depthStencilDesc.DepthWriteMask = D3D11_DEPTH_WRITE_MASK_ALL;
+    depthStencilDesc.DepthFunc = D3D11_COMPARISON_ALWAYS;
+    depthStencilDesc.StencilEnable = FALSE;
+    depthStencilDesc.StencilReadMask = D3D11_DEFAULT_STENCIL_READ_MASK;
+    depthStencilDesc.StencilWriteMask = D3D11_DEFAULT_STENCIL_WRITE_MASK;
+    depthStencilDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
+    depthStencilDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
+    depthStencilDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
+
+    result = device->CreateDepthStencilState(&depthStencilDesc, &mCopyDepthStencilState);
+    ASSERT(SUCCEEDED(result));
+
+    D3D11_BUFFER_DESC constantBufferDesc = { 0 };
+    constantBufferDesc.ByteWidth = rx::roundUp<UINT>(sizeof(CopyShaderParams), 32u);
+    constantBufferDesc.Usage = D3D11_USAGE_DYNAMIC;
+    constantBufferDesc.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
+    constantBufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+    constantBufferDesc.MiscFlags = 0;
+    constantBufferDesc.StructureByteStride = 0;
+
+    result = device->CreateBuffer(&constantBufferDesc, NULL, &mParamsConstantBuffer);
+    ASSERT(SUCCEEDED(result));
+    d3d11::SetDebugName(mParamsConstantBuffer, "PixelTransfer11 constant buffer");
+
+    StructZero(&mParamsData);
+
+    // init shaders
+    if (mRenderer->isLevel9())
+        return;
+
+    mBufferToTextureVS = d3d11::CompileVS(device, g_VS_BufferToTexture, "BufferToTexture VS");
+    mBufferToTextureGS = d3d11::CompileGS(device, g_GS_BufferToTexture, "BufferToTexture GS");
+
+    buildShaderMap();
+}
+
+PixelTransfer11::~PixelTransfer11()
+{
+    for (auto shaderMapIt = mBufferToTexturePSMap.begin(); shaderMapIt != mBufferToTexturePSMap.end(); shaderMapIt++)
+    {
+        SafeRelease(shaderMapIt->second);
+    }
+
+    mBufferToTexturePSMap.clear();
+
+    SafeRelease(mBufferToTextureVS);
+    SafeRelease(mBufferToTextureGS);
+    SafeRelease(mParamsConstantBuffer);
+    SafeRelease(mCopyRasterizerState);
+    SafeRelease(mCopyDepthStencilState);
+}
+
+void PixelTransfer11::setBufferToTextureCopyParams(const gl::Box &destArea, const gl::Extents &destSize, GLenum internalFormat,
+                                                   const gl::PixelUnpackState &unpack, unsigned int offset, CopyShaderParams *parametersOut)
+{
+    StructZero(parametersOut);
+
+    float texelCenterX = 0.5f / static_cast<float>(destSize.width - 1);
+    float texelCenterY = 0.5f / static_cast<float>(destSize.height - 1);
+
+    unsigned int bytesPerPixel = gl::GetInternalFormatInfo(internalFormat).pixelBytes;
+    unsigned int alignmentBytes = static_cast<unsigned int>(unpack.alignment);
+    unsigned int alignmentPixels = (alignmentBytes <= bytesPerPixel ? 1 : alignmentBytes / bytesPerPixel);
+
+    parametersOut->FirstPixelOffset     = offset;
+    parametersOut->PixelsPerRow         = static_cast<unsigned int>(destArea.width);
+    parametersOut->RowStride            = roundUp(parametersOut->PixelsPerRow, alignmentPixels);
+    parametersOut->RowsPerSlice         = static_cast<unsigned int>(destArea.height);
+    parametersOut->PositionOffset[0]    = texelCenterX + (destArea.x / float(destSize.width)) * 2.0f - 1.0f;
+    parametersOut->PositionOffset[1]    = texelCenterY + ((destSize.height - destArea.y - 1) / float(destSize.height)) * 2.0f - 1.0f;
+    parametersOut->PositionScale[0]     = 2.0f / static_cast<float>(destSize.width);
+    parametersOut->PositionScale[1]     = -2.0f / static_cast<float>(destSize.height);
+}
+
+bool PixelTransfer11::copyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                                          GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea)
+{
+    gl::Extents destSize = destRenderTarget->getExtents();
+
+    if (destArea.x   < 0 || destArea.x   + destArea.width    > destSize.width    ||
+        destArea.y   < 0 || destArea.y   + destArea.height   > destSize.height   ||
+        destArea.z   < 0 || destArea.z   + destArea.depth    > destSize.depth    )
+    {
+        return false;
+    }
+
+    const gl::Buffer &sourceBuffer = *unpack.pixelBuffer.get();
+
+    ASSERT(mRenderer->supportsFastCopyBufferToTexture(destinationFormat));
+
+    ID3D11PixelShader *pixelShader = findBufferToTexturePS(destinationFormat);
+    ASSERT(pixelShader);
+
+    // The SRV must be in the proper read format, which may be different from the destination format
+    // EG: for half float data, we can load full precision floats with implicit conversion
+    GLenum unsizedFormat = gl::GetInternalFormatInfo(destinationFormat).format;
+    GLenum sourceFormat = gl::GetFormatTypeInfo(unsizedFormat, sourcePixelsType).internalFormat;
+
+    const d3d11::TextureFormat &sourceFormatInfo = d3d11::GetTextureFormatInfo(sourceFormat);
+    DXGI_FORMAT srvFormat = sourceFormatInfo.srvFormat;
+    ASSERT(srvFormat != DXGI_FORMAT_UNKNOWN);
+    Buffer11 *bufferStorage11 = Buffer11::makeBuffer11(sourceBuffer.getImplementation());
+    ID3D11ShaderResourceView *bufferSRV = bufferStorage11->getSRV(srvFormat);
+    ASSERT(bufferSRV != NULL);
+
+    ID3D11RenderTargetView *textureRTV = RenderTarget11::makeRenderTarget11(destRenderTarget)->getRenderTargetView();
+    ASSERT(textureRTV != NULL);
+
+    CopyShaderParams shaderParams;
+    setBufferToTextureCopyParams(destArea, destSize, sourceFormat, unpack, offset, &shaderParams);
+
+    ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
+
+    ID3D11ShaderResourceView *nullSRV = NULL;
+    ID3D11Buffer *nullBuffer = NULL;
+    UINT zero = 0;
+
+    // Are we doing a 2D or 3D copy?
+    ID3D11GeometryShader *geometryShader = ((destSize.depth > 1) ? mBufferToTextureGS : NULL);
+
+    deviceContext->VSSetShader(mBufferToTextureVS, NULL, 0);
+    deviceContext->GSSetShader(geometryShader, NULL, 0);
+    deviceContext->PSSetShader(pixelShader, NULL, 0);
+    deviceContext->PSSetShaderResources(0, 1, &bufferSRV);
+    deviceContext->IASetInputLayout(NULL);
+    deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_POINTLIST);
+
+    deviceContext->IASetVertexBuffers(0, 1, &nullBuffer, &zero, &zero);
+    deviceContext->OMSetBlendState(NULL, NULL, 0xFFFFFFF);
+    deviceContext->OMSetDepthStencilState(mCopyDepthStencilState, 0xFFFFFFFF);
+    deviceContext->RSSetState(mCopyRasterizerState);
+
+    mRenderer->setOneTimeRenderTarget(textureRTV);
+
+    if (!StructEquals(mParamsData, shaderParams))
+    {
+        d3d11::SetBufferData(deviceContext, mParamsConstantBuffer, shaderParams);
+        mParamsData = shaderParams;
+    }
+
+    deviceContext->VSSetConstantBuffers(0, 1, &mParamsConstantBuffer);
+
+    // Set the viewport
+    D3D11_VIEWPORT viewport;
+    viewport.TopLeftX = 0;
+    viewport.TopLeftY = 0;
+    viewport.Width = destSize.width;
+    viewport.Height = destSize.height;
+    viewport.MinDepth = 0.0f;
+    viewport.MaxDepth = 1.0f;
+    deviceContext->RSSetViewports(1, &viewport);
+
+    UINT numPixels = (destArea.width * destArea.height * destArea.depth);
+    deviceContext->Draw(numPixels, 0);
+
+    // Unbind textures and render targets and vertex buffer
+    deviceContext->PSSetShaderResources(0, 1, &nullSRV);
+    deviceContext->VSSetConstantBuffers(0, 1, &nullBuffer);
+
+    mRenderer->markAllStateDirty();
+
+    return true;
+}
+
+void PixelTransfer11::buildShaderMap()
+{
+    ID3D11Device *device = mRenderer->getDevice();
+
+    mBufferToTexturePSMap[GL_FLOAT]        = d3d11::CompilePS(device, g_PS_BufferToTexture_4F,  "BufferToTexture RGBA ps");
+    mBufferToTexturePSMap[GL_INT]          = d3d11::CompilePS(device, g_PS_BufferToTexture_4I,  "BufferToTexture RGBA-I ps");
+    mBufferToTexturePSMap[GL_UNSIGNED_INT] = d3d11::CompilePS(device, g_PS_BufferToTexture_4UI, "BufferToTexture RGBA-UI ps");
+}
+
+ID3D11PixelShader *PixelTransfer11::findBufferToTexturePS(GLenum internalFormat) const
+{
+    GLenum componentType = gl::GetInternalFormatInfo(internalFormat).componentType;
+    if (componentType == GL_SIGNED_NORMALIZED || componentType == GL_UNSIGNED_NORMALIZED)
+    {
+        componentType = GL_FLOAT;
+    }
+
+    auto shaderMapIt = mBufferToTexturePSMap.find(componentType);
+    return (shaderMapIt == mBufferToTexturePSMap.end() ? NULL : shaderMapIt->second);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.h
new file mode 100644
index 0000000000..ed1a3ae1d0
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.h
@@ -0,0 +1,86 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// PixelTransfer11.h:
+//   Buffer-to-Texture and Texture-to-Buffer data transfers.
+//   Used to implement pixel unpack and pixel pack buffers in ES3.
+
+#ifndef LIBGLESV2_PIXELTRANSFER11_H_
+#define LIBGLESV2_PIXELTRANSFER11_H_
+
+#include "common/platform.h"
+
+#include <GLES2/gl2.h>
+
+#include <map>
+
+namespace gl
+{
+
+class Buffer;
+struct Box;
+struct Extents;
+struct PixelUnpackState;
+
+}
+
+namespace rx
+{
+class Renderer11;
+class RenderTarget;
+
+class PixelTransfer11
+{
+  public:
+    explicit PixelTransfer11(Renderer11 *renderer);
+    ~PixelTransfer11();
+
+    static bool supportsBufferToTextureCopy(GLenum internalFormat);
+
+    // unpack: the source buffer is stored in the unpack state, and buffer strides
+    // offset: the start of the data within the unpack buffer
+    // destRenderTarget: individual slice/layer of a target texture
+    // destinationFormat/sourcePixelsType: determines shaders + shader parameters
+    // destArea: the sub-section of destRenderTarget to copy to
+    bool copyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                             GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea);
+
+  private:
+
+    struct CopyShaderParams
+    {
+        unsigned int FirstPixelOffset;
+        unsigned int PixelsPerRow;
+        unsigned int RowStride;
+        unsigned int RowsPerSlice;
+        float PositionOffset[2];
+        float PositionScale[2];
+        int TexLocationOffset[2];
+        int TexLocationScale[2];
+    };
+
+    static void setBufferToTextureCopyParams(const gl::Box &destArea, const gl::Extents &destSize, GLenum internalFormat,
+                                             const gl::PixelUnpackState &unpack, unsigned int offset, CopyShaderParams *parametersOut);
+
+    void buildShaderMap();
+    ID3D11PixelShader *findBufferToTexturePS(GLenum internalFormat) const;
+
+    Renderer11 *mRenderer;
+
+    std::map<GLenum, ID3D11PixelShader *> mBufferToTexturePSMap;
+    ID3D11VertexShader *mBufferToTextureVS;
+    ID3D11GeometryShader *mBufferToTextureGS;
+    ID3D11Buffer *mParamsConstantBuffer;
+    CopyShaderParams mParamsData;
+
+    ID3D11RasterizerState *mCopyRasterizerState;
+    ID3D11DepthStencilState *mCopyDepthStencilState;
+
+};
+
+}
+
+#endif // LIBGLESV2_PIXELTRANSFER11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Query11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Query11.cpp
new file mode 100644
index 0000000000..7109be3e28
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Query11.cpp
@@ -0,0 +1,156 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Query11.cpp: Defines the rx::Query11 class which implements rx::QueryImpl.
+
+#include "libGLESv2/renderer/d3d/d3d11/Query11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/main.h"
+
+#include <GLES2/gl2ext.h>
+
+namespace rx
+{
+
+Query11::Query11(rx::Renderer11 *renderer, GLenum type)
+    : QueryImpl(type),
+      mResult(0),
+      mQueryFinished(false),
+      mRenderer(renderer),
+      mQuery(NULL)
+{
+}
+
+Query11::~Query11()
+{
+    SafeRelease(mQuery);
+}
+
+gl::Error Query11::begin()
+{
+    if (mQuery == NULL)
+    {
+        D3D11_QUERY_DESC queryDesc;
+        queryDesc.Query = gl_d3d11::ConvertQueryType(getType());
+        queryDesc.MiscFlags = 0;
+
+        HRESULT result = mRenderer->getDevice()->CreateQuery(&queryDesc, &mQuery);
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Internal query creation failed, result: 0x%X.", result);
+        }
+    }
+
+    mRenderer->getDeviceContext()->Begin(mQuery);
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query11::end()
+{
+    ASSERT(mQuery);
+    mRenderer->getDeviceContext()->End(mQuery);
+
+    mQueryFinished = false;
+    mResult = GL_FALSE;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query11::getResult(GLuint *params)
+{
+    while (!mQueryFinished)
+    {
+        gl::Error error = testQuery();
+        if (error.isError())
+        {
+            return error;
+        }
+
+        if (!mQueryFinished)
+        {
+            Sleep(0);
+        }
+    }
+
+    ASSERT(mQueryFinished);
+    *params = mResult;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query11::isResultAvailable(GLuint *available)
+{
+    gl::Error error = testQuery();
+    if (error.isError())
+    {
+        return error;
+    }
+
+    *available = (mQueryFinished ? GL_TRUE : GL_FALSE);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query11::testQuery()
+{
+    if (!mQueryFinished)
+    {
+        ASSERT(mQuery);
+
+        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+        switch (getType())
+        {
+          case GL_ANY_SAMPLES_PASSED_EXT:
+          case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
+            {
+                UINT64 numPixels = 0;
+                HRESULT result = context->GetData(mQuery, &numPixels, sizeof(numPixels), 0);
+                if (FAILED(result))
+                {
+                    return gl::Error(GL_OUT_OF_MEMORY, "Failed to get the data of an internal query, result: 0x%X.", result);
+                }
+
+                if (result == S_OK)
+                {
+                    mQueryFinished = true;
+                    mResult = (numPixels > 0) ? GL_TRUE : GL_FALSE;
+                }
+            }
+            break;
+
+          case GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN:
+            {
+                D3D11_QUERY_DATA_SO_STATISTICS soStats = { 0 };
+                HRESULT result = context->GetData(mQuery, &soStats, sizeof(soStats), 0);
+                if (FAILED(result))
+                {
+                    return gl::Error(GL_OUT_OF_MEMORY, "Failed to get the data of an internal query, result: 0x%X.", result);
+                }
+
+                if (result == S_OK)
+                {
+                    mQueryFinished = true;
+                    mResult = static_cast<GLuint>(soStats.NumPrimitivesWritten);
+                }
+            }
+            break;
+
+        default:
+            UNREACHABLE();
+            break;
+        }
+
+        if (!mQueryFinished && mRenderer->testDeviceLost(true))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to test get query result, device is lost.");
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Query11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Query11.h
index 0a03de77ca..822f2542ee 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Query11.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Query11.h
@@ -21,15 +21,19 @@ class Query11 : public QueryImpl
     Query11(rx::Renderer11 *renderer, GLenum type);
     virtual ~Query11();
 
-    void begin();
-    void end();
-    GLuint getResult();
-    GLboolean isResultAvailable();
+    virtual gl::Error begin();
+    virtual gl::Error end();
+    virtual gl::Error getResult(GLuint *params);
+    virtual gl::Error isResultAvailable(GLuint *available);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Query11);
 
-    GLboolean testQuery();
+    gl::Error testQuery();
+
+    GLuint mResult;
+
+    bool mQueryFinished;
 
     rx::Renderer11 *mRenderer;
     ID3D11Query *mQuery;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderStateCache.cpp
index a1c324cd80..71b931f27e 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderStateCache.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -8,18 +7,29 @@
 // RenderStateCache.cpp: Defines rx::RenderStateCache, a cache of Direct3D render
 // state objects.
 
-#include "libGLESv2/renderer/d3d11/RenderStateCache.h"
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
-
+#include "libGLESv2/renderer/d3d/d3d11/RenderStateCache.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
 #include "libGLESv2/Framebuffer.h"
-#include "libGLESv2/Renderbuffer.h"
-#include "libGLESv2/utilities.h"
+#include "libGLESv2/FramebufferAttachment.h"
+
 #include "common/debug.h"
+
 #include "third_party/murmurhash/MurmurHash3.h"
 
 namespace rx
 {
 
+template <typename mapType>
+static void ClearStateMap(mapType &map)
+{
+    for (typename mapType::iterator i = map.begin(); i != map.end(); i++)
+    {
+        SafeRelease(i->second.first);
+    }
+    map.clear();
+}
+
 // MSDN's documentation of ID3D11Device::CreateBlendState, ID3D11Device::CreateRasterizerState,
 // ID3D11Device::CreateDepthStencilState and ID3D11Device::CreateSamplerState claims the maximum
 // number of unique states of each type an application can create is 4096
@@ -49,29 +59,10 @@ void RenderStateCache::initialize(ID3D11Device *device)
 
 void RenderStateCache::clear()
 {
-    for (BlendStateMap::iterator i = mBlendStateCache.begin(); i != mBlendStateCache.end(); i++)
-    {
-        i->second.first->Release();
-    }
-    mBlendStateCache.clear();
-
-    for (RasterizerStateMap::iterator i = mRasterizerStateCache.begin(); i != mRasterizerStateCache.end(); i++)
-    {
-        i->second.first->Release();
-    }
-    mRasterizerStateCache.clear();
-
-    for (DepthStencilStateMap::iterator i = mDepthStencilStateCache.begin(); i != mDepthStencilStateCache.end(); i++)
-    {
-        i->second.first->Release();
-    }
-    mDepthStencilStateCache.clear();
-
-    for (SamplerStateMap::iterator i = mSamplerStateCache.begin(); i != mSamplerStateCache.end(); i++)
-    {
-        i->second.first->Release();
-    }
-    mSamplerStateCache.clear();
+    ClearStateMap(mBlendStateCache);
+    ClearStateMap(mRasterizerStateCache);
+    ClearStateMap(mDepthStencilStateCache);
+    ClearStateMap(mSamplerStateCache);
 }
 
 std::size_t RenderStateCache::hashBlendState(const BlendStateKey &blendState)
@@ -79,58 +70,56 @@ std::size_t RenderStateCache::hashBlendState(const BlendStateKey &blendState)
     static const unsigned int seed = 0xABCDEF98;
 
     std::size_t hash = 0;
-    MurmurHash3_x86_32(&blendState, sizeof(BlendStateKey), seed, &hash);
+    MurmurHash3_x86_32(&blendState, sizeof(gl::BlendState), seed, &hash);
     return hash;
 }
 
 bool RenderStateCache::compareBlendStates(const BlendStateKey &a, const BlendStateKey &b)
 {
-    return memcmp(&a, &b, sizeof(gl::BlendState)) == 0;
+    return memcmp(&a, &b, sizeof(BlendStateKey)) == 0;
 }
 
-ID3D11BlendState *RenderStateCache::getBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState)
+gl::Error RenderStateCache::getBlendState(const gl::Framebuffer *framebuffer, const gl::BlendState &blendState,
+                                          ID3D11BlendState **outBlendState)
 {
     if (!mDevice)
     {
-        ERR("RenderStateCache is not initialized.");
-        return NULL;
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal error, RenderStateCache is not initialized.");
     }
 
     bool mrt = false;
 
+    const gl::ColorbufferInfo &colorbuffers = framebuffer->getColorbuffersForRender();
+
     BlendStateKey key = { 0 };
     key.blendState = blendState;
-    for (unsigned int i = 0; i < D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT; i++)
+    for (size_t colorAttachment = 0; colorAttachment < colorbuffers.size(); ++colorAttachment)
     {
-        gl::Renderbuffer *renderBuffer = framebuffer->getColorbuffer(i);
-        if (renderBuffer)
+        const gl::FramebufferAttachment *attachment = colorbuffers[colorAttachment];
+
+        auto rtChannels = key.rtChannels[colorAttachment];
+
+        if (attachment)
         {
-            if (i > 0)
+            if (colorAttachment > 0)
             {
                 mrt = true;
             }
 
-            GLenum internalFormat = renderBuffer->getInternalFormat();
-            key.rtChannels[i][0] = gl::GetRedSize(internalFormat) > 0;
-            key.rtChannels[i][1] = gl::GetGreenSize(internalFormat) > 0;
-            key.rtChannels[i][2] = gl::GetBlueSize(internalFormat) > 0;;
-            key.rtChannels[i][3] = gl::GetAlphaSize(internalFormat) > 0;
-        }
-        else
-        {
-            key.rtChannels[i][0] = false;
-            key.rtChannels[i][1] = false;
-            key.rtChannels[i][2] = false;
-            key.rtChannels[i][3] = false;
+            rtChannels[0] = attachment->getRedSize()   > 0;
+            rtChannels[1] = attachment->getGreenSize() > 0;
+            rtChannels[2] = attachment->getBlueSize()  > 0;
+            rtChannels[3] = attachment->getAlphaSize() > 0;
         }
     }
 
-    BlendStateMap::iterator i = mBlendStateCache.find(key);
-    if (i != mBlendStateCache.end())
+    BlendStateMap::iterator keyIter = mBlendStateCache.find(key);
+    if (keyIter != mBlendStateCache.end())
     {
-        BlendStateCounterPair &state = i->second;
+        BlendStateCounterPair &state = keyIter->second;
         state.second = mCounter++;
-        return state.first;
+        *outBlendState = state.first;
+        return gl::Error(GL_NO_ERROR);
     }
     else
     {
@@ -147,7 +136,7 @@ ID3D11BlendState *RenderStateCache::getBlendState(gl::Framebuffer *framebuffer,
                     leastRecentlyUsed = i;
                 }
             }
-            leastRecentlyUsed->second.first->Release();
+            SafeRelease(leastRecentlyUsed->second.first);
             mBlendStateCache.erase(leastRecentlyUsed);
         }
 
@@ -182,13 +171,13 @@ ID3D11BlendState *RenderStateCache::getBlendState(gl::Framebuffer *framebuffer,
         HRESULT result = mDevice->CreateBlendState(&blendDesc, &dx11BlendState);
         if (FAILED(result) || !dx11BlendState)
         {
-            ERR("Unable to create a ID3D11BlendState, HRESULT: 0x%X.", result);
-            return NULL;
+            return gl::Error(GL_OUT_OF_MEMORY, "Unable to create a ID3D11BlendState, HRESULT: 0x%X.", result);
         }
 
         mBlendStateCache.insert(std::make_pair(key, std::make_pair(dx11BlendState, mCounter++)));
 
-        return dx11BlendState;
+        *outBlendState = dx11BlendState;
+        return gl::Error(GL_NO_ERROR);
     }
 }
 
@@ -206,26 +195,25 @@ bool RenderStateCache::compareRasterizerStates(const RasterizerStateKey &a, cons
     return memcmp(&a, &b, sizeof(RasterizerStateKey)) == 0;
 }
 
-ID3D11RasterizerState *RenderStateCache::getRasterizerState(const gl::RasterizerState &rasterState,
-                                                            bool scissorEnabled, unsigned int depthSize)
+gl::Error RenderStateCache::getRasterizerState(const gl::RasterizerState &rasterState, bool scissorEnabled,
+                                               ID3D11RasterizerState **outRasterizerState)
 {
     if (!mDevice)
     {
-        ERR("RenderStateCache is not initialized.");
-        return NULL;
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal error, RenderStateCache is not initialized.");
     }
 
-    RasterizerStateKey key;
+    RasterizerStateKey key = { 0 };
     key.rasterizerState = rasterState;
     key.scissorEnabled = scissorEnabled;
-    key.depthSize = depthSize;
 
-    RasterizerStateMap::iterator i = mRasterizerStateCache.find(key);
-    if (i != mRasterizerStateCache.end())
+    RasterizerStateMap::iterator keyIter = mRasterizerStateCache.find(key);
+    if (keyIter != mRasterizerStateCache.end())
     {
-        RasterizerStateCounterPair &state = i->second;
+        RasterizerStateCounterPair &state = keyIter->second;
         state.second = mCounter++;
-        return state.first;
+        *outRasterizerState = state.first;
+        return gl::Error(GL_NO_ERROR);
     }
     else
     {
@@ -242,7 +230,7 @@ ID3D11RasterizerState *RenderStateCache::getRasterizerState(const gl::Rasterizer
                     leastRecentlyUsed = i;
                 }
             }
-            leastRecentlyUsed->second.first->Release();
+            SafeRelease(leastRecentlyUsed->second.first);
             mRasterizerStateCache.erase(leastRecentlyUsed);
         }
 
@@ -258,25 +246,34 @@ ID3D11RasterizerState *RenderStateCache::getRasterizerState(const gl::Rasterizer
         rasterDesc.FillMode = D3D11_FILL_SOLID;
         rasterDesc.CullMode = cullMode;
         rasterDesc.FrontCounterClockwise = (rasterState.frontFace == GL_CCW) ? FALSE: TRUE;
-        rasterDesc.DepthBias = ldexp(rasterState.polygonOffsetUnits, -static_cast<int>(depthSize));
         rasterDesc.DepthBiasClamp = 0.0f; // MSDN documentation of DepthBiasClamp implies a value of zero will preform no clamping, must be tested though.
-        rasterDesc.SlopeScaledDepthBias = rasterState.polygonOffsetFactor;
         rasterDesc.DepthClipEnable = TRUE;
         rasterDesc.ScissorEnable = scissorEnabled ? TRUE : FALSE;
         rasterDesc.MultisampleEnable = rasterState.multiSample;
         rasterDesc.AntialiasedLineEnable = FALSE;
 
+        if (rasterState.polygonOffsetFill)
+        {
+            rasterDesc.SlopeScaledDepthBias = rasterState.polygonOffsetFactor;
+            rasterDesc.DepthBias = (INT)rasterState.polygonOffsetUnits;
+        }
+        else
+        {
+            rasterDesc.SlopeScaledDepthBias = 0.0f;
+            rasterDesc.DepthBias = 0;
+        }
+
         ID3D11RasterizerState *dx11RasterizerState = NULL;
         HRESULT result = mDevice->CreateRasterizerState(&rasterDesc, &dx11RasterizerState);
         if (FAILED(result) || !dx11RasterizerState)
         {
-            ERR("Unable to create a ID3D11RasterizerState, HRESULT: 0x%X.", result);
-            return NULL;
+            return gl::Error(GL_OUT_OF_MEMORY, "Unable to create a ID3D11RasterizerState, HRESULT: 0x%X.", result);
         }
 
         mRasterizerStateCache.insert(std::make_pair(key, std::make_pair(dx11RasterizerState, mCounter++)));
 
-        return dx11RasterizerState;
+        *outRasterizerState = dx11RasterizerState;
+        return gl::Error(GL_NO_ERROR);
     }
 }
 
@@ -294,20 +291,20 @@ bool RenderStateCache::compareDepthStencilStates(const gl::DepthStencilState &a,
     return memcmp(&a, &b, sizeof(gl::DepthStencilState)) == 0;
 }
 
-ID3D11DepthStencilState *RenderStateCache::getDepthStencilState(const gl::DepthStencilState &dsState)
+gl::Error RenderStateCache::getDepthStencilState(const gl::DepthStencilState &dsState, ID3D11DepthStencilState **outDSState)
 {
     if (!mDevice)
     {
-        ERR("RenderStateCache is not initialized.");
-        return NULL;
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal error, RenderStateCache is not initialized.");
     }
 
-    DepthStencilStateMap::iterator i = mDepthStencilStateCache.find(dsState);
-    if (i != mDepthStencilStateCache.end())
+    DepthStencilStateMap::iterator keyIter = mDepthStencilStateCache.find(dsState);
+    if (keyIter != mDepthStencilStateCache.end())
     {
-        DepthStencilStateCounterPair &state = i->second;
+        DepthStencilStateCounterPair &state = keyIter->second;
         state.second = mCounter++;
-        return state.first;
+        *outDSState = state.first;
+        return gl::Error(GL_NO_ERROR);
     }
     else
     {
@@ -324,7 +321,7 @@ ID3D11DepthStencilState *RenderStateCache::getDepthStencilState(const gl::DepthS
                     leastRecentlyUsed = i;
                 }
             }
-            leastRecentlyUsed->second.first->Release();
+            SafeRelease(leastRecentlyUsed->second.first);
             mDepthStencilStateCache.erase(leastRecentlyUsed);
         }
 
@@ -348,13 +345,13 @@ ID3D11DepthStencilState *RenderStateCache::getDepthStencilState(const gl::DepthS
         HRESULT result = mDevice->CreateDepthStencilState(&dsDesc, &dx11DepthStencilState);
         if (FAILED(result) || !dx11DepthStencilState)
         {
-            ERR("Unable to create a ID3D11DepthStencilState, HRESULT: 0x%X.", result);
-            return NULL;
+            return gl::Error(GL_OUT_OF_MEMORY, "Unable to create a ID3D11DepthStencilState, HRESULT: 0x%X.", result);
         }
 
         mDepthStencilStateCache.insert(std::make_pair(dsState, std::make_pair(dx11DepthStencilState, mCounter++)));
 
-        return dx11DepthStencilState;
+        *outDSState = dx11DepthStencilState;
+        return gl::Error(GL_NO_ERROR);
     }
 }
 
@@ -372,20 +369,20 @@ bool RenderStateCache::compareSamplerStates(const gl::SamplerState &a, const gl:
     return memcmp(&a, &b, sizeof(gl::SamplerState)) == 0;
 }
 
-ID3D11SamplerState *RenderStateCache::getSamplerState(const gl::SamplerState &samplerState)
+gl::Error RenderStateCache::getSamplerState(const gl::SamplerState &samplerState, ID3D11SamplerState **outSamplerState)
 {
     if (!mDevice)
     {
-        ERR("RenderStateCache is not initialized.");
-        return NULL;
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal error, RenderStateCache is not initialized.");
     }
 
-    SamplerStateMap::iterator i = mSamplerStateCache.find(samplerState);
-    if (i != mSamplerStateCache.end())
+    SamplerStateMap::iterator keyIter = mSamplerStateCache.find(samplerState);
+    if (keyIter != mSamplerStateCache.end())
     {
-        SamplerStateCounterPair &state = i->second;
+        SamplerStateCounterPair &state = keyIter->second;
         state.second = mCounter++;
-        return state.first;
+        *outSamplerState = state.first;
+        return gl::Error(GL_NO_ERROR);
     }
     else
     {
@@ -402,37 +399,37 @@ ID3D11SamplerState *RenderStateCache::getSamplerState(const gl::SamplerState &sa
                     leastRecentlyUsed = i;
                 }
             }
-            leastRecentlyUsed->second.first->Release();
+            SafeRelease(leastRecentlyUsed->second.first);
             mSamplerStateCache.erase(leastRecentlyUsed);
         }
 
         D3D11_SAMPLER_DESC samplerDesc;
-        samplerDesc.Filter = gl_d3d11::ConvertFilter(samplerState.minFilter, samplerState.magFilter, samplerState.maxAnisotropy);
+        samplerDesc.Filter = gl_d3d11::ConvertFilter(samplerState.minFilter, samplerState.magFilter,
+                                                     samplerState.maxAnisotropy, samplerState.compareMode);
         samplerDesc.AddressU = gl_d3d11::ConvertTextureWrap(samplerState.wrapS);
         samplerDesc.AddressV = gl_d3d11::ConvertTextureWrap(samplerState.wrapT);
-        samplerDesc.AddressW = D3D11_TEXTURE_ADDRESS_CLAMP;
-        samplerDesc.MipLODBias = static_cast<float>(samplerState.lodOffset);
+        samplerDesc.AddressW = gl_d3d11::ConvertTextureWrap(samplerState.wrapR);
+        samplerDesc.MipLODBias = 0;
         samplerDesc.MaxAnisotropy = samplerState.maxAnisotropy;
-        samplerDesc.ComparisonFunc = D3D11_COMPARISON_NEVER;
+        samplerDesc.ComparisonFunc = gl_d3d11::ConvertComparison(samplerState.compareFunc);
         samplerDesc.BorderColor[0] = 0.0f;
         samplerDesc.BorderColor[1] = 0.0f;
         samplerDesc.BorderColor[2] = 0.0f;
         samplerDesc.BorderColor[3] = 0.0f;
-        samplerDesc.MinLOD = gl_d3d11::ConvertMinLOD(samplerState.minFilter, samplerState.lodOffset);
-        samplerDesc.MaxLOD = mDevice->GetFeatureLevel() >= D3D_FEATURE_LEVEL_10_0
-                ? gl_d3d11::ConvertMaxLOD(samplerState.minFilter, samplerState.lodOffset) : FLT_MAX;
+        samplerDesc.MinLOD = samplerState.minLod;
+        samplerDesc.MaxLOD = samplerState.maxLod;
 
         ID3D11SamplerState *dx11SamplerState = NULL;
         HRESULT result = mDevice->CreateSamplerState(&samplerDesc, &dx11SamplerState);
         if (FAILED(result) || !dx11SamplerState)
         {
-            ERR("Unable to create a ID3D11DepthStencilState, HRESULT: 0x%X.", result);
-            return NULL;
+            return gl::Error(GL_OUT_OF_MEMORY, "Unable to create a ID3D11SamplerState, HRESULT: 0x%X.", result);
         }
 
         mSamplerStateCache.insert(std::make_pair(samplerState, std::make_pair(dx11SamplerState, mCounter++)));
 
-        return dx11SamplerState;
+        *outSamplerState = dx11SamplerState;
+        return gl::Error(GL_NO_ERROR);
     }
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderStateCache.h
index b4b871a4bd..d5471a3061 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderStateCache.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,8 +11,11 @@
 #define LIBGLESV2_RENDERER_RENDERSTATECACHE_H_
 
 #include "libGLESv2/angletypes.h"
+#include "libGLESv2/Error.h"
 #include "common/angleutils.h"
 
+#include <unordered_map>
+
 namespace gl
 {
 class Framebuffer;
@@ -20,6 +23,7 @@ class Framebuffer;
 
 namespace rx
 {
+class Renderer11;
 
 class RenderStateCache
 {
@@ -30,12 +34,10 @@ class RenderStateCache
     void initialize(ID3D11Device *device);
     void clear();
 
-    // Increments refcount on the returned blend state, Release() must be called.
-    ID3D11BlendState *getBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState);
-    ID3D11RasterizerState *getRasterizerState(const gl::RasterizerState &rasterState,
-                                              bool scissorEnabled, unsigned int depthSize);
-    ID3D11DepthStencilState *getDepthStencilState(const gl::DepthStencilState &dsState);
-    ID3D11SamplerState *getSamplerState(const gl::SamplerState &samplerState);
+    gl::Error getBlendState(const gl::Framebuffer *framebuffer, const gl::BlendState &blendState, ID3D11BlendState **outBlendState);
+    gl::Error getRasterizerState(const gl::RasterizerState &rasterState, bool scissorEnabled, ID3D11RasterizerState **outRasterizerState);
+    gl::Error getDepthStencilState(const gl::DepthStencilState &dsState, ID3D11DepthStencilState **outDSState);
+    gl::Error getSamplerState(const gl::SamplerState &samplerState, ID3D11SamplerState **outSamplerState);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(RenderStateCache);
@@ -63,7 +65,6 @@ class RenderStateCache
     {
         gl::RasterizerState rasterizerState;
         bool scissorEnabled;
-        unsigned int depthSize;
     };
     static std::size_t hashRasterizerState(const RasterizerStateKey &rasterState);
     static bool compareRasterizerStates(const RasterizerStateKey &a, const RasterizerStateKey &b);
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderTarget11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderTarget11.cpp
index 3707097aa4..3041f21faa 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderTarget11.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderTarget11.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -8,26 +7,66 @@
 // RenderTarget11.cpp: Implements a DX11-specific wrapper for ID3D11View pointers
 // retained by Renderbuffers.
 
-#include "libGLESv2/renderer/d3d11/RenderTarget11.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderTarget11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
 #include "libGLESv2/main.h"
 
 namespace rx
 {
 
-static unsigned int getRTVSubresourceIndex(ID3D11Texture2D *texture, ID3D11RenderTargetView *view)
+static bool getTextureProperties(ID3D11Resource *resource, unsigned int *mipLevels, unsigned int *samples)
+{
+    ID3D11Texture1D *texture1D = d3d11::DynamicCastComObject<ID3D11Texture1D>(resource);
+    if (texture1D)
+    {
+        D3D11_TEXTURE1D_DESC texDesc;
+        texture1D->GetDesc(&texDesc);
+        SafeRelease(texture1D);
+
+        *mipLevels = texDesc.MipLevels;
+        *samples = 0;
+
+        return true;
+    }
+
+    ID3D11Texture2D *texture2D = d3d11::DynamicCastComObject<ID3D11Texture2D>(resource);
+    if (texture2D)
+    {
+        D3D11_TEXTURE2D_DESC texDesc;
+        texture2D->GetDesc(&texDesc);
+        SafeRelease(texture2D);
+
+        *mipLevels = texDesc.MipLevels;
+        *samples = texDesc.SampleDesc.Count > 1 ? texDesc.SampleDesc.Count : 0;
+
+        return true;
+    }
+
+    ID3D11Texture3D *texture3D = d3d11::DynamicCastComObject<ID3D11Texture3D>(resource);
+    if (texture3D)
+    {
+        D3D11_TEXTURE3D_DESC texDesc;
+        texture3D->GetDesc(&texDesc);
+        SafeRelease(texture3D);
+
+        *mipLevels = texDesc.MipLevels;
+        *samples = 0;
+
+        return true;
+    }
+
+    return false;
+}
+
+static unsigned int getRTVSubresourceIndex(ID3D11Resource *resource, ID3D11RenderTargetView *view)
 {
     D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
     view->GetDesc(&rtvDesc);
 
-    D3D11_TEXTURE2D_DESC texDesc;
-    texture->GetDesc(&texDesc);
-
     unsigned int mipSlice = 0;
     unsigned int arraySlice = 0;
-    unsigned int mipLevels = texDesc.MipLevels;
 
     switch (rtvDesc.ViewDimension)
     {
@@ -76,20 +115,19 @@ static unsigned int getRTVSubresourceIndex(ID3D11Texture2D *texture, ID3D11Rende
         break;
     }
 
+    unsigned int mipLevels, samples;
+    getTextureProperties(resource,  &mipLevels, &samples);
+
     return D3D11CalcSubresource(mipSlice, arraySlice, mipLevels);
 }
 
-static unsigned int getDSVSubresourceIndex(ID3D11Texture2D *texture, ID3D11DepthStencilView *view)
+static unsigned int getDSVSubresourceIndex(ID3D11Resource *resource, ID3D11DepthStencilView *view)
 {
     D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc;
     view->GetDesc(&dsvDesc);
 
-    D3D11_TEXTURE2D_DESC texDesc;
-    texture->GetDesc(&texDesc);
-
     unsigned int mipSlice = 0;
     unsigned int arraySlice = 0;
-    unsigned int mipLevels = texDesc.MipLevels;
 
     switch (dsvDesc.ViewDimension)
     {
@@ -123,7 +161,7 @@ static unsigned int getDSVSubresourceIndex(ID3D11Texture2D *texture, ID3D11Depth
         arraySlice = dsvDesc.Texture2DMSArray.FirstArraySlice;
         break;
 
-      case D3D11_RTV_DIMENSION_UNKNOWN:
+      case D3D11_DSV_DIMENSION_UNKNOWN:
         UNIMPLEMENTED();
         break;
 
@@ -132,16 +170,37 @@ static unsigned int getDSVSubresourceIndex(ID3D11Texture2D *texture, ID3D11Depth
         break;
     }
 
+    unsigned int mipLevels, samples;
+    getTextureProperties(resource, &mipLevels, &samples);
+
     return D3D11CalcSubresource(mipSlice, arraySlice, mipLevels);
 }
 
-RenderTarget11::RenderTarget11(Renderer *renderer, ID3D11RenderTargetView *rtv, ID3D11Texture2D *tex, ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height)
+RenderTarget11::RenderTarget11(Renderer *renderer, ID3D11RenderTargetView *rtv, ID3D11Resource *resource,
+                               ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height, GLsizei depth)
 {
     mRenderer = Renderer11::makeRenderer11(renderer);
-    mTexture = tex;
+
+    mTexture = resource;
+    if (mTexture)
+    {
+        mTexture->AddRef();
+    }
+
     mRenderTarget = rtv;
+    if (mRenderTarget)
+    {
+        mRenderTarget->AddRef();
+    }
+
     mDepthStencil = NULL;
+
     mShaderResource = srv;
+    if (mShaderResource)
+    {
+        mShaderResource->AddRef();
+    }
+
     mSubresourceIndex = 0;
 
     if (mRenderTarget && mTexture)
@@ -149,26 +208,46 @@ RenderTarget11::RenderTarget11(Renderer *renderer, ID3D11RenderTargetView *rtv,
         D3D11_RENDER_TARGET_VIEW_DESC desc;
         mRenderTarget->GetDesc(&desc);
 
-        D3D11_TEXTURE2D_DESC texDesc;
-        mTexture->GetDesc(&texDesc);
+        unsigned int mipLevels, samples;
+        getTextureProperties(mTexture, &mipLevels, &samples);
 
         mSubresourceIndex = getRTVSubresourceIndex(mTexture, mRenderTarget);
         mWidth = width;
         mHeight = height;
-        mSamples = (texDesc.SampleDesc.Count > 1) ? texDesc.SampleDesc.Count : 0;
+        mDepth = depth;
+        mSamples = samples;
 
-        mInternalFormat = d3d11_gl::ConvertTextureInternalFormat(desc.Format);
-        mActualFormat = d3d11_gl::ConvertTextureInternalFormat(desc.Format);
+        const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(desc.Format);
+        mInternalFormat = dxgiFormatInfo.internalFormat;
+        mActualFormat = dxgiFormatInfo.internalFormat;
     }
 }
 
-RenderTarget11::RenderTarget11(Renderer *renderer, ID3D11DepthStencilView *dsv, ID3D11Texture2D *tex, ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height)
+RenderTarget11::RenderTarget11(Renderer *renderer, ID3D11DepthStencilView *dsv, ID3D11Resource *resource,
+                               ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height, GLsizei depth)
 {
     mRenderer = Renderer11::makeRenderer11(renderer);
-    mTexture = tex;
+
+    mTexture = resource;
+    if (mTexture)
+    {
+        mTexture->AddRef();
+    }
+
     mRenderTarget = NULL;
+
     mDepthStencil = dsv;
+    if (mDepthStencil)
+    {
+        mDepthStencil->AddRef();
+    }
+
     mShaderResource = srv;
+    if (mShaderResource)
+    {
+        mShaderResource->AddRef();
+    }
+
     mSubresourceIndex = 0;
 
     if (mDepthStencil && mTexture)
@@ -176,20 +255,22 @@ RenderTarget11::RenderTarget11(Renderer *renderer, ID3D11DepthStencilView *dsv,
         D3D11_DEPTH_STENCIL_VIEW_DESC desc;
         mDepthStencil->GetDesc(&desc);
 
-        D3D11_TEXTURE2D_DESC texDesc;
-        mTexture->GetDesc(&texDesc);
+        unsigned int mipLevels, samples;
+        getTextureProperties(mTexture, &mipLevels, &samples);
 
         mSubresourceIndex = getDSVSubresourceIndex(mTexture, mDepthStencil);
         mWidth = width;
         mHeight = height;
-        mSamples = (texDesc.SampleDesc.Count > 1) ? texDesc.SampleDesc.Count : 0;
+        mDepth = depth;
+        mSamples = samples;
 
-        mInternalFormat = d3d11_gl::ConvertTextureInternalFormat(desc.Format);
-        mActualFormat = d3d11_gl::ConvertTextureInternalFormat(desc.Format);
+        const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(desc.Format);
+        mInternalFormat = dxgiFormatInfo.internalFormat;
+        mActualFormat = dxgiFormatInfo.internalFormat;
     }
 }
 
-RenderTarget11::RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height, GLenum format, GLsizei samples, bool depth)
+RenderTarget11::RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height, GLenum internalFormat, GLsizei samples)
 {
     mRenderer = Renderer11::makeRenderer11(renderer);
     mTexture = NULL;
@@ -197,14 +278,11 @@ RenderTarget11::RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height
     mDepthStencil = NULL;
     mShaderResource = NULL;
 
-    DXGI_FORMAT requestedFormat = gl_d3d11::ConvertRenderbufferFormat(format);
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalFormat);
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(formatInfo.texFormat);
 
-    int supportedSamples = mRenderer->getNearestSupportedSamples(requestedFormat, samples);
-    if (supportedSamples < 0)
-    {
-        gl::error(GL_OUT_OF_MEMORY);
-        return;
-    }
+    const gl::TextureCaps &textureCaps = mRenderer->getRendererTextureCaps().get(internalFormat);
+    GLuint supportedSamples = textureCaps.getNearestSamples(samples);
 
     if (width > 0 && height > 0)
     {
@@ -214,16 +292,35 @@ RenderTarget11::RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height
         desc.Height = height;
         desc.MipLevels = 1;
         desc.ArraySize = 1;
-        desc.Format = requestedFormat;
+        desc.Format = formatInfo.texFormat;
         desc.SampleDesc.Count = (supportedSamples == 0) ? 1 : supportedSamples;
         desc.SampleDesc.Quality = 0;
         desc.Usage = D3D11_USAGE_DEFAULT;
         desc.CPUAccessFlags = 0;
         desc.MiscFlags = 0;
-        desc.BindFlags = (depth ? D3D11_BIND_DEPTH_STENCIL : (D3D11_BIND_RENDER_TARGET | D3D11_BIND_SHADER_RESOURCE));
+
+        // If a rendertarget or depthstencil format exists for this texture format,
+        // we'll flag it to allow binding that way. Shader resource views are a little
+        // more complicated.
+        bool bindRTV = false, bindDSV = false, bindSRV = false;
+        bindRTV = (formatInfo.rtvFormat != DXGI_FORMAT_UNKNOWN);
+        bindDSV = (formatInfo.dsvFormat != DXGI_FORMAT_UNKNOWN);
+        if (formatInfo.srvFormat != DXGI_FORMAT_UNKNOWN)
+        {
+            // Multisample targets flagged for binding as depth stencil cannot also be
+            // flagged for binding as SRV, so make certain not to add the SRV flag for
+            // these targets.
+            bindSRV = !(formatInfo.dsvFormat != DXGI_FORMAT_UNKNOWN && desc.SampleDesc.Count > 1);
+        }
+
+        desc.BindFlags = (bindRTV ? D3D11_BIND_RENDER_TARGET   : 0) |
+                         (bindDSV ? D3D11_BIND_DEPTH_STENCIL   : 0) |
+                         (bindSRV ? D3D11_BIND_SHADER_RESOURCE : 0);
 
         ID3D11Device *device = mRenderer->getDevice();
-        HRESULT result = device->CreateTexture2D(&desc, NULL, &mTexture);
+        ID3D11Texture2D *texture = NULL;
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &texture);
+        mTexture = texture;
 
         if (result == E_OUTOFMEMORY)
         {
@@ -232,10 +329,28 @@ RenderTarget11::RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height
         }
         ASSERT(SUCCEEDED(result));
 
-        if (depth)
+        if (bindSRV)
+        {
+            D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+            srvDesc.Format = formatInfo.srvFormat;
+            srvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_SRV_DIMENSION_TEXTURE2D : D3D11_SRV_DIMENSION_TEXTURE2DMS;
+            srvDesc.Texture2D.MostDetailedMip = 0;
+            srvDesc.Texture2D.MipLevels = 1;
+            result = device->CreateShaderResourceView(mTexture, &srvDesc, &mShaderResource);
+
+            if (result == E_OUTOFMEMORY)
+            {
+                SafeRelease(mTexture);
+                gl::error(GL_OUT_OF_MEMORY);
+                return;
+            }
+            ASSERT(SUCCEEDED(result));
+        }
+
+        if (bindDSV)
         {
             D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc;
-            dsvDesc.Format = requestedFormat;
+            dsvDesc.Format = formatInfo.dsvFormat;
             dsvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_DSV_DIMENSION_TEXTURE2D : D3D11_DSV_DIMENSION_TEXTURE2DMS;
             dsvDesc.Texture2D.MipSlice = 0;
             dsvDesc.Flags = 0;
@@ -243,82 +358,58 @@ RenderTarget11::RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height
 
             if (result == E_OUTOFMEMORY)
             {
-                mTexture->Release();
-                mTexture = NULL;
+                SafeRelease(mTexture);
+                SafeRelease(mShaderResource);
                 gl::error(GL_OUT_OF_MEMORY);
+                return;
             }
             ASSERT(SUCCEEDED(result));
         }
-        else
+
+        if (bindRTV)
         {
             D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
-            rtvDesc.Format = requestedFormat;
+            rtvDesc.Format = formatInfo.rtvFormat;
             rtvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_RTV_DIMENSION_TEXTURE2D : D3D11_RTV_DIMENSION_TEXTURE2DMS;
             rtvDesc.Texture2D.MipSlice = 0;
             result = device->CreateRenderTargetView(mTexture, &rtvDesc, &mRenderTarget);
 
             if (result == E_OUTOFMEMORY)
             {
-                mTexture->Release();
-                mTexture = NULL;
+                SafeRelease(mTexture);
+                SafeRelease(mShaderResource);
+                SafeRelease(mDepthStencil);
                 gl::error(GL_OUT_OF_MEMORY);
                 return;
             }
             ASSERT(SUCCEEDED(result));
 
-            D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
-            srvDesc.Format = requestedFormat;
-            srvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_SRV_DIMENSION_TEXTURE2D : D3D11_SRV_DIMENSION_TEXTURE2DMS;
-            srvDesc.Texture2D.MostDetailedMip = 0;
-            srvDesc.Texture2D.MipLevels = 1;
-            result = device->CreateShaderResourceView(mTexture, &srvDesc, &mShaderResource);
-
-            if (result == E_OUTOFMEMORY)
+            if (formatInfo.dataInitializerFunction != NULL)
             {
-                mTexture->Release();
-                mTexture = NULL;
-                mRenderTarget->Release();
-                mRenderTarget = NULL;
-                gl::error(GL_OUT_OF_MEMORY);
-                return;
+                ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+                const float clearValues[4] = { 0.0f, 0.0f, 0.0f, 1.0f };
+                context->ClearRenderTargetView(mRenderTarget, clearValues);
             }
-            ASSERT(SUCCEEDED(result));
         }
     }
 
+
     mWidth = width;
     mHeight = height;
-    mInternalFormat = format;
+    mDepth = 1;
+    mInternalFormat = internalFormat;
     mSamples = supportedSamples;
-    mActualFormat = d3d11_gl::ConvertTextureInternalFormat(requestedFormat);
+    mActualFormat = dxgiFormatInfo.internalFormat;
     mSubresourceIndex = D3D11CalcSubresource(0, 0, 1);
 }
 
 RenderTarget11::~RenderTarget11()
 {
-    if (mTexture)
-    {
-        mTexture->Release();
-        mTexture = NULL;
-    }
-
-    if (mRenderTarget)
-    {
-        mRenderTarget->Release();
-        mRenderTarget = NULL;
-    }
-
-    if (mDepthStencil)
-    {
-        mDepthStencil->Release();
-        mDepthStencil = NULL;
-    }
-
-    if (mShaderResource)
-    {
-        mShaderResource->Release();
-        mShaderResource = NULL;
-    }
+    SafeRelease(mTexture);
+    SafeRelease(mRenderTarget);
+    SafeRelease(mDepthStencil);
+    SafeRelease(mShaderResource);
 }
 
 RenderTarget11 *RenderTarget11::makeRenderTarget11(RenderTarget *target)
@@ -327,7 +418,12 @@ RenderTarget11 *RenderTarget11::makeRenderTarget11(RenderTarget *target)
     return static_cast<rx::RenderTarget11*>(target);
 }
 
-ID3D11Texture2D *RenderTarget11::getTexture() const
+void RenderTarget11::invalidate(GLint x, GLint y, GLsizei width, GLsizei height)
+{
+    // Currently a no-op
+}
+
+ID3D11Resource *RenderTarget11::getTexture() const
 {
     return mTexture;
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderTarget11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderTarget11.h
index 97827f2639..82182957af 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderTarget11.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/RenderTarget11.h
@@ -20,14 +20,17 @@ class Renderer11;
 class RenderTarget11 : public RenderTarget
 {
   public:
-    RenderTarget11(Renderer *renderer, ID3D11RenderTargetView *rtv, ID3D11Texture2D *tex, ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height);
-    RenderTarget11(Renderer *renderer, ID3D11DepthStencilView *dsv, ID3D11Texture2D *tex, ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height);
-    RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height, GLenum format, GLsizei samples, bool depth);
+    // RenderTarget11 takes ownership of any D3D11 resources it is given and will AddRef them
+    RenderTarget11(Renderer *renderer, ID3D11RenderTargetView *rtv, ID3D11Resource *resource, ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height, GLsizei depth);
+    RenderTarget11(Renderer *renderer, ID3D11DepthStencilView *dsv, ID3D11Resource *resource, ID3D11ShaderResourceView *srv, GLsizei width, GLsizei height, GLsizei depth);
+    RenderTarget11(Renderer *renderer, GLsizei width, GLsizei height, GLenum internalFormat, GLsizei samples);
     virtual ~RenderTarget11();
 
     static RenderTarget11 *makeRenderTarget11(RenderTarget *renderTarget);
 
-    ID3D11Texture2D *getTexture() const;
+    virtual void invalidate(GLint x, GLint y, GLsizei width, GLsizei height);
+
+    ID3D11Resource *getTexture() const;
     ID3D11RenderTargetView *getRenderTargetView() const;
     ID3D11DepthStencilView *getDepthStencilView() const;
     ID3D11ShaderResourceView *getShaderResourceView() const;
@@ -38,7 +41,7 @@ class RenderTarget11 : public RenderTarget
     DISALLOW_COPY_AND_ASSIGN(RenderTarget11);
 
     unsigned int mSubresourceIndex;
-    ID3D11Texture2D *mTexture;
+    ID3D11Resource *mTexture;
     ID3D11RenderTargetView *mRenderTarget;
     ID3D11DepthStencilView *mDepthStencil;
     ID3D11ShaderResourceView *mShaderResource;
@@ -48,4 +51,4 @@ class RenderTarget11 : public RenderTarget
 
 }
 
-#endif LIBGLESV2_RENDERER_RENDERTARGET11_H_
\ No newline at end of file
+#endif // LIBGLESV2_RENDERER_RENDERTARGET11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
new file mode 100644
index 0000000000..b29b2ef910
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
@@ -0,0 +1,3266 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Renderer11.cpp: Implements a back-end specific class for the D3D11 renderer.
+
+#include "common/platform.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/renderer/d3d/ProgramD3D.h"
+#include "libGLESv2/renderer/d3d/ShaderD3D.h"
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
+#include "libGLESv2/renderer/d3d/TransformFeedbackD3D.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderTarget11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.h"
+#include "libGLESv2/renderer/d3d/d3d11/SwapChain11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Image11.h"
+#include "libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/IndexBuffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Buffer11.h"
+#include "libGLESv2/renderer/d3d/VertexDataManager.h"
+#include "libGLESv2/renderer/d3d/IndexDataManager.h"
+#include "libGLESv2/renderer/d3d/d3d11/TextureStorage11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Query11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Fence11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Blit11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Clear11.h"
+#include "libGLESv2/renderer/d3d/d3d11/PixelTransfer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/VertexArray11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Buffer11.h"
+
+#include "libEGL/Display.h"
+
+#include "common/utilities.h"
+
+#include <EGL/eglext.h>
+
+#include <sstream>
+
+// Enable ANGLE_SKIP_DXGI_1_2_CHECK if there is not a possibility of using cross-process
+// HWNDs or the Windows 7 Platform Update (KB2670838) is expected to be installed.
+#ifndef ANGLE_SKIP_DXGI_1_2_CHECK
+#define ANGLE_SKIP_DXGI_1_2_CHECK 0
+#endif
+
+#ifdef _DEBUG
+// this flag enables suppressing some spurious warnings that pop up in certain WebGL samples
+// and conformance tests. to enable all warnings, remove this define.
+#define ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS 1
+#endif
+
+namespace rx
+{
+static const DXGI_FORMAT RenderTargetFormats[] =
+    {
+        DXGI_FORMAT_B8G8R8A8_UNORM,
+        DXGI_FORMAT_R8G8B8A8_UNORM
+    };
+
+static const DXGI_FORMAT DepthStencilFormats[] =
+    {
+        DXGI_FORMAT_UNKNOWN,
+        DXGI_FORMAT_D24_UNORM_S8_UINT,
+        DXGI_FORMAT_D16_UNORM
+    };
+
+enum
+{
+    MAX_TEXTURE_IMAGE_UNITS_VTF_SM4 = 16
+};
+
+Renderer11::Renderer11(egl::Display *display, EGLNativeDisplayType hDc, EGLint requestedDisplay)
+    : Renderer(display),
+      mDc(hDc),
+      mRequestedDisplay(requestedDisplay)
+{
+    mVertexDataManager = NULL;
+    mIndexDataManager = NULL;
+
+    mLineLoopIB = NULL;
+    mTriangleFanIB = NULL;
+
+    mBlit = NULL;
+    mPixelTransfer = NULL;
+
+    mClear = NULL;
+
+    mSyncQuery = NULL;
+
+    mD3d11Module = NULL;
+    mDxgiModule = NULL;
+
+    mDeviceLost = false;
+
+    mDevice = NULL;
+    mDeviceContext = NULL;
+    mDxgiAdapter = NULL;
+    mDxgiFactory = NULL;
+
+    mDriverConstantBufferVS = NULL;
+    mDriverConstantBufferPS = NULL;
+
+    mAppliedVertexShader = NULL;
+    mAppliedGeometryShader = NULL;
+    mCurPointGeometryShader = NULL;
+    mAppliedPixelShader = NULL;
+}
+
+Renderer11::~Renderer11()
+{
+    release();
+}
+
+Renderer11 *Renderer11::makeRenderer11(Renderer *renderer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(rx::Renderer11*, renderer));
+    return static_cast<rx::Renderer11*>(renderer);
+}
+
+#ifndef __d3d11_1_h__
+#define D3D11_MESSAGE_ID_DEVICE_DRAW_RENDERTARGETVIEW_NOT_SET ((D3D11_MESSAGE_ID)3146081)
+#endif
+
+EGLint Renderer11::initialize()
+{
+    if (!mCompiler.initialize())
+    {
+        return EGL_NOT_INITIALIZED;
+    }
+
+#if !defined(ANGLE_PLATFORM_WINRT)
+    mDxgiModule = LoadLibrary(TEXT("dxgi.dll"));
+    mD3d11Module = LoadLibrary(TEXT("d3d11.dll"));
+
+    if (mD3d11Module == NULL || mDxgiModule == NULL)
+    {
+        ERR("Could not load D3D11 or DXGI library - aborting!\n");
+        return EGL_NOT_INITIALIZED;
+    }
+
+    // create the D3D11 device
+    ASSERT(mDevice == NULL);
+    PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = (PFN_D3D11_CREATE_DEVICE)GetProcAddress(mD3d11Module, "D3D11CreateDevice");
+
+    if (D3D11CreateDevice == NULL)
+    {
+        ERR("Could not retrieve D3D11CreateDevice address - aborting!\n");
+        return EGL_NOT_INITIALIZED;
+    }
+#endif
+
+    D3D_FEATURE_LEVEL featureLevels[] =
+    {
+        D3D_FEATURE_LEVEL_11_0,
+        D3D_FEATURE_LEVEL_10_1,
+        D3D_FEATURE_LEVEL_10_0,
+#if !defined(ANGLE_ENABLE_D3D9)
+        D3D_FEATURE_LEVEL_9_3,
+        D3D_FEATURE_LEVEL_9_2,
+        D3D_FEATURE_LEVEL_9_1,
+#endif
+    };
+
+    D3D_DRIVER_TYPE driverType = D3D_DRIVER_TYPE_HARDWARE;
+    if (mRequestedDisplay == EGL_PLATFORM_ANGLE_TYPE_D3D11_WARP_ANGLE)
+    {
+        driverType = D3D_DRIVER_TYPE_WARP;
+    }
+
+    HRESULT result = S_OK;
+
+#ifdef _DEBUG
+    result = D3D11CreateDevice(NULL,
+                               driverType,
+                               NULL,
+                               D3D11_CREATE_DEVICE_DEBUG,
+                               featureLevels,
+                               ArraySize(featureLevels),
+                               D3D11_SDK_VERSION,
+                               &mDevice,
+                               &mFeatureLevel,
+                               &mDeviceContext);
+
+    if (!mDevice || FAILED(result))
+    {
+        ERR("Failed creating Debug D3D11 device - falling back to release runtime.\n");
+    }
+
+    if (!mDevice || FAILED(result))
+#endif
+    {
+        result = D3D11CreateDevice(NULL,
+                                   driverType,
+                                   NULL,
+                                   0,
+                                   featureLevels,
+                                   ArraySize(featureLevels),
+                                   D3D11_SDK_VERSION,
+                                   &mDevice,
+                                   &mFeatureLevel,
+                                   &mDeviceContext);
+
+        if (!mDevice || FAILED(result))
+        {
+            ERR("Could not create D3D11 device - aborting!\n");
+            return EGL_NOT_INITIALIZED;   // Cleanup done by destructor through glDestroyRenderer
+        }
+    }
+
+#if !ANGLE_SKIP_DXGI_1_2_CHECK && !defined(ANGLE_PLATFORM_WINRT)
+    // In order to create a swap chain for an HWND owned by another process, DXGI 1.2 is required.
+    // The easiest way to check is to query for a IDXGIDevice2.
+    bool requireDXGI1_2 = false;
+    HWND hwnd = WindowFromDC(mDc);
+    if (hwnd)
+    {
+        DWORD currentProcessId = GetCurrentProcessId();
+        DWORD wndProcessId;
+        GetWindowThreadProcessId(hwnd, &wndProcessId);
+        requireDXGI1_2 = (currentProcessId != wndProcessId);
+    }
+    else
+    {
+        requireDXGI1_2 = true;
+    }
+
+    if (requireDXGI1_2)
+    {
+        IDXGIDevice2 *dxgiDevice2 = NULL;
+        result = mDevice->QueryInterface(__uuidof(IDXGIDevice2), (void**)&dxgiDevice2);
+        if (FAILED(result))
+        {
+            ERR("DXGI 1.2 required to present to HWNDs owned by another process.\n");
+            return EGL_NOT_INITIALIZED;
+        }
+        SafeRelease(dxgiDevice2);
+    }
+#endif
+
+#if !defined(ANGLE_PLATFORM_WINRT)
+    IDXGIDevice *dxgiDevice = NULL;
+#else
+    IDXGIDevice1 *dxgiDevice = NULL;
+#endif
+    result = mDevice->QueryInterface(IID_PPV_ARGS(&dxgiDevice));
+
+    if (FAILED(result))
+    {
+        ERR("Could not query DXGI device - aborting!\n");
+        return EGL_NOT_INITIALIZED;
+    }
+
+    result = dxgiDevice->GetParent(__uuidof(IDXGIAdapter), (void**)&mDxgiAdapter);
+
+    if (FAILED(result))
+    {
+        ERR("Could not retrieve DXGI adapter - aborting!\n");
+        return EGL_NOT_INITIALIZED;
+    }
+
+    SafeRelease(dxgiDevice);
+
+    mDxgiAdapter->GetDesc(&mAdapterDescription);
+    memset(mDescription, 0, sizeof(mDescription));
+    wcstombs(mDescription, mAdapterDescription.Description, sizeof(mDescription) - 1);
+
+    result = mDxgiAdapter->GetParent(__uuidof(IDXGIFactory), (void**)&mDxgiFactory);
+
+    if (!mDxgiFactory || FAILED(result))
+    {
+        ERR("Could not create DXGI factory - aborting!\n");
+        return EGL_NOT_INITIALIZED;
+    }
+
+    // Disable some spurious D3D11 debug warnings to prevent them from flooding the output log
+#if !defined(__MINGW32__) && defined(ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS) && defined(_DEBUG)
+    ID3D11InfoQueue *infoQueue;
+    result = mDevice->QueryInterface(__uuidof(ID3D11InfoQueue),  (void **)&infoQueue);
+
+    if (SUCCEEDED(result))
+    {
+        D3D11_MESSAGE_ID hideMessages[] =
+        {
+            D3D11_MESSAGE_ID_DEVICE_DRAW_RENDERTARGETVIEW_NOT_SET
+        };
+
+        D3D11_INFO_QUEUE_FILTER filter = {0};
+        filter.DenyList.NumIDs = ArraySize(hideMessages);
+        filter.DenyList.pIDList = hideMessages;
+
+        infoQueue->AddStorageFilterEntries(&filter);
+        SafeRelease(infoQueue);
+    }
+#endif
+
+#if !defined(ANGLE_PLATFORM_WINRT)
+    static wchar_t *qt_d3dcreate_multihreaded_var = _wgetenv(L"QT_D3DCREATE_MULTITHREADED");
+    if (qt_d3dcreate_multihreaded_var && wcsstr(qt_d3dcreate_multihreaded_var, L"1"))
+    {
+        ID3D10Multithread *multithread;
+        result = mDevice->QueryInterface(IID_PPV_ARGS(&multithread));
+        ASSERT(SUCCEEDED(result));
+        result = multithread->SetMultithreadProtected(true);
+        ASSERT(SUCCEEDED(result));
+        multithread->Release();
+    }
+#endif
+
+    initializeDevice();
+
+    return EGL_SUCCESS;
+}
+
+// do any one-time device initialization
+// NOTE: this is also needed after a device lost/reset
+// to reset the scene status and ensure the default states are reset.
+void Renderer11::initializeDevice()
+{
+    mStateCache.initialize(mDevice);
+    mInputLayoutCache.initialize(mDevice, mDeviceContext);
+
+    ASSERT(!mVertexDataManager && !mIndexDataManager);
+    mVertexDataManager = new VertexDataManager(this);
+    mIndexDataManager = new IndexDataManager(this);
+
+    ASSERT(!mBlit);
+    mBlit = new Blit11(this);
+
+    ASSERT(!mClear);
+    mClear = new Clear11(this);
+
+    ASSERT(!mPixelTransfer);
+    mPixelTransfer = new PixelTransfer11(this);
+
+    const gl::Caps &rendererCaps = getRendererCaps();
+
+    mForceSetVertexSamplerStates.resize(rendererCaps.maxVertexTextureImageUnits);
+    mCurVertexSamplerStates.resize(rendererCaps.maxVertexTextureImageUnits);
+
+    mForceSetPixelSamplerStates.resize(rendererCaps.maxTextureImageUnits);
+    mCurPixelSamplerStates.resize(rendererCaps.maxTextureImageUnits);
+
+    mCurVertexSRVs.resize(rendererCaps.maxVertexTextureImageUnits);
+    mCurPixelSRVs.resize(rendererCaps.maxTextureImageUnits);
+
+    markAllStateDirty();
+}
+
+int Renderer11::generateConfigs(ConfigDesc **configDescList)
+{
+    unsigned int numRenderFormats = ArraySize(RenderTargetFormats);
+    unsigned int numDepthFormats = ArraySize(DepthStencilFormats);
+    (*configDescList) = new ConfigDesc[numRenderFormats * numDepthFormats];
+    int numConfigs = 0;
+
+    for (unsigned int formatIndex = 0; formatIndex < numRenderFormats; formatIndex++)
+    {
+        const d3d11::DXGIFormat &renderTargetFormatInfo = d3d11::GetDXGIFormatInfo(RenderTargetFormats[formatIndex]);
+        const gl::TextureCaps &renderTargetFormatCaps = getRendererTextureCaps().get(renderTargetFormatInfo.internalFormat);
+        if (renderTargetFormatCaps.renderable)
+        {
+            for (unsigned int depthStencilIndex = 0; depthStencilIndex < numDepthFormats; depthStencilIndex++)
+            {
+                const d3d11::DXGIFormat &depthStencilFormatInfo = d3d11::GetDXGIFormatInfo(DepthStencilFormats[depthStencilIndex]);
+                const gl::TextureCaps &depthStencilFormatCaps = getRendererTextureCaps().get(depthStencilFormatInfo.internalFormat);
+                if (depthStencilFormatCaps.renderable || DepthStencilFormats[depthStencilIndex] == DXGI_FORMAT_UNKNOWN)
+                {
+                    ConfigDesc newConfig;
+                    newConfig.renderTargetFormat = renderTargetFormatInfo.internalFormat;
+                    newConfig.depthStencilFormat = depthStencilFormatInfo.internalFormat;
+                    newConfig.multiSample = 0;     // FIXME: enumerate multi-sampling
+                    newConfig.fastConfig = true;   // Assume all DX11 format conversions to be fast
+                    newConfig.es3Capable = true;
+
+                    (*configDescList)[numConfigs++] = newConfig;
+                }
+            }
+        }
+    }
+
+    return numConfigs;
+}
+
+void Renderer11::deleteConfigs(ConfigDesc *configDescList)
+{
+    delete [] (configDescList);
+}
+
+void Renderer11::sync(bool block)
+{
+    if (block)
+    {
+        HRESULT result;
+
+        if (!mSyncQuery)
+        {
+            D3D11_QUERY_DESC queryDesc;
+            queryDesc.Query = D3D11_QUERY_EVENT;
+            queryDesc.MiscFlags = 0;
+
+            result = mDevice->CreateQuery(&queryDesc, &mSyncQuery);
+            ASSERT(SUCCEEDED(result));
+        }
+
+        mDeviceContext->End(mSyncQuery);
+        mDeviceContext->Flush();
+
+        do
+        {
+            result = mDeviceContext->GetData(mSyncQuery, NULL, 0, D3D11_ASYNC_GETDATA_DONOTFLUSH);
+
+            // Keep polling, but allow other threads to do something useful first
+            Sleep(0);
+
+            if (testDeviceLost(true))
+            {
+                return;
+            }
+        }
+        while (result == S_FALSE);
+    }
+    else
+    {
+        mDeviceContext->Flush();
+    }
+}
+
+SwapChain *Renderer11::createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat)
+{
+    return new rx::SwapChain11(this, window, shareHandle, backBufferFormat, depthBufferFormat);
+}
+
+gl::Error Renderer11::generateSwizzle(gl::Texture *texture)
+{
+    if (texture)
+    {
+        TextureStorage *texStorage = texture->getNativeTexture();
+        if (texStorage)
+        {
+            TextureStorage11 *storage11 = TextureStorage11::makeTextureStorage11(texStorage);
+
+            gl::Error error = storage11->generateSwizzles(texture->getSamplerState().swizzleRed,
+                                                          texture->getSamplerState().swizzleGreen,
+                                                          texture->getSamplerState().swizzleBlue,
+                                                          texture->getSamplerState().swizzleAlpha);
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &samplerState)
+{
+    if (type == gl::SAMPLER_PIXEL)
+    {
+        ASSERT(static_cast<unsigned int>(index) < getRendererCaps().maxTextureImageUnits);
+
+        if (mForceSetPixelSamplerStates[index] || memcmp(&samplerState, &mCurPixelSamplerStates[index], sizeof(gl::SamplerState)) != 0)
+        {
+            ID3D11SamplerState *dxSamplerState = NULL;
+            gl::Error error = mStateCache.getSamplerState(samplerState, &dxSamplerState);
+            if (error.isError())
+            {
+                return error;
+            }
+
+            ASSERT(dxSamplerState != NULL);
+            mDeviceContext->PSSetSamplers(index, 1, &dxSamplerState);
+
+            mCurPixelSamplerStates[index] = samplerState;
+        }
+
+        mForceSetPixelSamplerStates[index] = false;
+    }
+    else if (type == gl::SAMPLER_VERTEX)
+    {
+        ASSERT(static_cast<unsigned int>(index) < getRendererCaps().maxVertexTextureImageUnits);
+
+        if (mForceSetVertexSamplerStates[index] || memcmp(&samplerState, &mCurVertexSamplerStates[index], sizeof(gl::SamplerState)) != 0)
+        {
+            ID3D11SamplerState *dxSamplerState = NULL;
+            gl::Error error = mStateCache.getSamplerState(samplerState, &dxSamplerState);
+            if (error.isError())
+            {
+                return error;
+            }
+
+            ASSERT(dxSamplerState != NULL);
+            mDeviceContext->VSSetSamplers(index, 1, &dxSamplerState);
+
+            mCurVertexSamplerStates[index] = samplerState;
+        }
+
+        mForceSetVertexSamplerStates[index] = false;
+    }
+    else UNREACHABLE();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::setTexture(gl::SamplerType type, int index, gl::Texture *texture)
+{
+    ID3D11ShaderResourceView *textureSRV = NULL;
+    bool forceSetTexture = false;
+
+    if (texture)
+    {
+        TextureD3D* textureImpl = TextureD3D::makeTextureD3D(texture->getImplementation());
+        TextureStorage *texStorage = textureImpl->getNativeTexture();
+        ASSERT(texStorage != NULL);
+
+        TextureStorage11 *storage11 = TextureStorage11::makeTextureStorage11(texStorage);
+        gl::SamplerState samplerState;
+        texture->getSamplerStateWithNativeOffset(&samplerState);
+        textureSRV = storage11->getSRV(samplerState);
+
+        // If we get NULL back from getSRV here, something went wrong in the texture class and we're unexpectedly
+        // missing the shader resource view
+        ASSERT(textureSRV != NULL);
+
+        forceSetTexture = textureImpl->hasDirtyImages();
+        textureImpl->resetDirty();
+    }
+
+    if (type == gl::SAMPLER_PIXEL)
+    {
+        ASSERT(static_cast<unsigned int>(index) < getRendererCaps().maxTextureImageUnits);
+
+        if (forceSetTexture || mCurPixelSRVs[index] != textureSRV)
+        {
+            mDeviceContext->PSSetShaderResources(index, 1, &textureSRV);
+        }
+
+        mCurPixelSRVs[index] = textureSRV;
+    }
+    else if (type == gl::SAMPLER_VERTEX)
+    {
+        ASSERT(static_cast<unsigned int>(index) < getRendererCaps().maxVertexTextureImageUnits);
+
+        if (forceSetTexture || mCurVertexSRVs[index] != textureSRV)
+        {
+            mDeviceContext->VSSetShaderResources(index, 1, &textureSRV);
+        }
+
+        mCurVertexSRVs[index] = textureSRV;
+    }
+    else UNREACHABLE();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::setUniformBuffers(const gl::Buffer *vertexUniformBuffers[], const gl::Buffer *fragmentUniformBuffers[])
+{
+    for (unsigned int uniformBufferIndex = 0; uniformBufferIndex < gl::IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS; uniformBufferIndex++)
+    {
+        const gl::Buffer *uniformBuffer = vertexUniformBuffers[uniformBufferIndex];
+        if (uniformBuffer)
+        {
+            Buffer11 *bufferStorage = Buffer11::makeBuffer11(uniformBuffer->getImplementation());
+            ID3D11Buffer *constantBuffer = bufferStorage->getBuffer(BUFFER_USAGE_UNIFORM);
+
+            if (!constantBuffer)
+            {
+                return gl::Error(GL_OUT_OF_MEMORY);
+            }
+
+            if (mCurrentConstantBufferVS[uniformBufferIndex] != bufferStorage->getSerial())
+            {
+                mDeviceContext->VSSetConstantBuffers(getReservedVertexUniformBuffers() + uniformBufferIndex,
+                                                     1, &constantBuffer);
+                mCurrentConstantBufferVS[uniformBufferIndex] = bufferStorage->getSerial();
+            }
+        }
+    }
+
+    for (unsigned int uniformBufferIndex = 0; uniformBufferIndex < gl::IMPLEMENTATION_MAX_FRAGMENT_SHADER_UNIFORM_BUFFERS; uniformBufferIndex++)
+    {
+        const gl::Buffer *uniformBuffer = fragmentUniformBuffers[uniformBufferIndex];
+        if (uniformBuffer)
+        {
+            Buffer11 *bufferStorage = Buffer11::makeBuffer11(uniformBuffer->getImplementation());
+            ID3D11Buffer *constantBuffer = bufferStorage->getBuffer(BUFFER_USAGE_UNIFORM);
+
+            if (!constantBuffer)
+            {
+                return gl::Error(GL_OUT_OF_MEMORY);
+            }
+
+            if (mCurrentConstantBufferPS[uniformBufferIndex] != bufferStorage->getSerial())
+            {
+                mDeviceContext->PSSetConstantBuffers(getReservedFragmentUniformBuffers() + uniformBufferIndex,
+                                                     1, &constantBuffer);
+                mCurrentConstantBufferPS[uniformBufferIndex] = bufferStorage->getSerial();
+            }
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::setRasterizerState(const gl::RasterizerState &rasterState)
+{
+    if (mForceSetRasterState || memcmp(&rasterState, &mCurRasterState, sizeof(gl::RasterizerState)) != 0)
+    {
+        ID3D11RasterizerState *dxRasterState = NULL;
+        gl::Error error = mStateCache.getRasterizerState(rasterState, mScissorEnabled, &dxRasterState);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        mDeviceContext->RSSetState(dxRasterState);
+
+        mCurRasterState = rasterState;
+    }
+
+    mForceSetRasterState = false;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::ColorF &blendColor,
+                                    unsigned int sampleMask)
+{
+    if (mForceSetBlendState ||
+        memcmp(&blendState, &mCurBlendState, sizeof(gl::BlendState)) != 0 ||
+        memcmp(&blendColor, &mCurBlendColor, sizeof(gl::ColorF)) != 0 ||
+        sampleMask != mCurSampleMask)
+    {
+        ID3D11BlendState *dxBlendState = NULL;
+        gl::Error error = mStateCache.getBlendState(framebuffer, blendState, &dxBlendState);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        ASSERT(dxBlendState != NULL);
+
+        float blendColors[4] = {0.0f};
+        if (blendState.sourceBlendRGB != GL_CONSTANT_ALPHA && blendState.sourceBlendRGB != GL_ONE_MINUS_CONSTANT_ALPHA &&
+            blendState.destBlendRGB != GL_CONSTANT_ALPHA && blendState.destBlendRGB != GL_ONE_MINUS_CONSTANT_ALPHA)
+        {
+            blendColors[0] = blendColor.red;
+            blendColors[1] = blendColor.green;
+            blendColors[2] = blendColor.blue;
+            blendColors[3] = blendColor.alpha;
+        }
+        else
+        {
+            blendColors[0] = blendColor.alpha;
+            blendColors[1] = blendColor.alpha;
+            blendColors[2] = blendColor.alpha;
+            blendColors[3] = blendColor.alpha;
+        }
+
+        mDeviceContext->OMSetBlendState(dxBlendState, blendColors, sampleMask);
+
+        mCurBlendState = blendState;
+        mCurBlendColor = blendColor;
+        mCurSampleMask = sampleMask;
+    }
+
+    mForceSetBlendState = false;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
+                                           int stencilBackRef, bool frontFaceCCW)
+{
+    if (mForceSetDepthStencilState ||
+        memcmp(&depthStencilState, &mCurDepthStencilState, sizeof(gl::DepthStencilState)) != 0 ||
+        stencilRef != mCurStencilRef || stencilBackRef != mCurStencilBackRef)
+    {
+        ASSERT(depthStencilState.stencilWritemask == depthStencilState.stencilBackWritemask);
+        ASSERT(stencilRef == stencilBackRef);
+        ASSERT(depthStencilState.stencilMask == depthStencilState.stencilBackMask);
+
+        ID3D11DepthStencilState *dxDepthStencilState = NULL;
+        gl::Error error = mStateCache.getDepthStencilState(depthStencilState, &dxDepthStencilState);
+        if (error.isError())
+        {
+            return error;
+        }
+
+        ASSERT(dxDepthStencilState);
+
+        // Max D3D11 stencil reference value is 0xFF, corresponding to the max 8 bits in a stencil buffer
+        // GL specifies we should clamp the ref value to the nearest bit depth when doing stencil ops
+        META_ASSERT(D3D11_DEFAULT_STENCIL_READ_MASK == 0xFF);
+        META_ASSERT(D3D11_DEFAULT_STENCIL_WRITE_MASK == 0xFF);
+        UINT dxStencilRef = std::min<UINT>(stencilRef, 0xFFu);
+
+        mDeviceContext->OMSetDepthStencilState(dxDepthStencilState, dxStencilRef);
+
+        mCurDepthStencilState = depthStencilState;
+        mCurStencilRef = stencilRef;
+        mCurStencilBackRef = stencilBackRef;
+    }
+
+    mForceSetDepthStencilState = false;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Renderer11::setScissorRectangle(const gl::Rectangle &scissor, bool enabled)
+{
+    if (mForceSetScissor || memcmp(&scissor, &mCurScissor, sizeof(gl::Rectangle)) != 0 ||
+        enabled != mScissorEnabled)
+    {
+        if (enabled)
+        {
+            D3D11_RECT rect;
+            rect.left = std::max(0, scissor.x);
+            rect.top = std::max(0, scissor.y);
+            rect.right = scissor.x + std::max(0, scissor.width);
+            rect.bottom = scissor.y + std::max(0, scissor.height);
+
+            mDeviceContext->RSSetScissorRects(1, &rect);
+        }
+
+        if (enabled != mScissorEnabled)
+        {
+            mForceSetRasterState = true;
+        }
+
+        mCurScissor = scissor;
+        mScissorEnabled = enabled;
+    }
+
+    mForceSetScissor = false;
+}
+
+void Renderer11::setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
+                             bool ignoreViewport)
+{
+    gl::Rectangle actualViewport = viewport;
+    float actualZNear = gl::clamp01(zNear);
+    float actualZFar = gl::clamp01(zFar);
+    if (ignoreViewport)
+    {
+        actualViewport.x = 0;
+        actualViewport.y = 0;
+        actualViewport.width = mRenderTargetDesc.width;
+        actualViewport.height = mRenderTargetDesc.height;
+        actualZNear = 0.0f;
+        actualZFar = 1.0f;
+    }
+
+    const gl::Caps& caps = getRendererCaps();
+
+    // Clamp width and height first to the gl maximum, then clamp further if we extend past the D3D maximum bounds
+    D3D11_VIEWPORT dxViewport;
+    dxViewport.TopLeftX = gl::clamp(actualViewport.x, -static_cast<int>(caps.maxViewportWidth), static_cast<int>(caps.maxViewportWidth));
+    dxViewport.TopLeftY = gl::clamp(actualViewport.y, -static_cast<int>(caps.maxViewportHeight), static_cast<int>(caps.maxViewportHeight));
+    dxViewport.Width = gl::clamp(actualViewport.width, 0, static_cast<int>(caps.maxViewportWidth - dxViewport.TopLeftX));
+    dxViewport.Height = gl::clamp(actualViewport.height, 0, static_cast<int>(caps.maxViewportHeight - dxViewport.TopLeftY));
+    dxViewport.MinDepth = actualZNear;
+    dxViewport.MaxDepth = actualZFar;
+
+    bool viewportChanged = mForceSetViewport || memcmp(&actualViewport, &mCurViewport, sizeof(gl::Rectangle)) != 0 ||
+                           actualZNear != mCurNear || actualZFar != mCurFar;
+
+    if (viewportChanged)
+    {
+        mDeviceContext->RSSetViewports(1, &dxViewport);
+
+        mCurViewport = actualViewport;
+        mCurNear = actualZNear;
+        mCurFar = actualZFar;
+
+        mPixelConstants.viewCoords[0] = actualViewport.width  * 0.5f;
+        mPixelConstants.viewCoords[1] = actualViewport.height * 0.5f;
+        mPixelConstants.viewCoords[2] = actualViewport.x + (actualViewport.width  * 0.5f);
+        mPixelConstants.viewCoords[3] = actualViewport.y + (actualViewport.height * 0.5f);
+
+        mPixelConstants.depthFront[0] = (actualZFar - actualZNear) * 0.5f;
+        mPixelConstants.depthFront[1] = (actualZNear + actualZFar) * 0.5f;
+
+        mVertexConstants.depthRange[0] = actualZNear;
+        mVertexConstants.depthRange[1] = actualZFar;
+        mVertexConstants.depthRange[2] = actualZFar - actualZNear;
+
+        mPixelConstants.depthRange[0] = actualZNear;
+        mPixelConstants.depthRange[1] = actualZFar;
+        mPixelConstants.depthRange[2] = actualZFar - actualZNear;
+    }
+
+    mForceSetViewport = false;
+}
+
+bool Renderer11::applyPrimitiveType(GLenum mode, GLsizei count)
+{
+    D3D11_PRIMITIVE_TOPOLOGY primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_UNDEFINED;
+
+    GLsizei minCount = 0;
+
+    switch (mode)
+    {
+      case GL_POINTS:         primitiveTopology = D3D11_PRIMITIVE_TOPOLOGY_POINTLIST;   minCount = 1; break;
+      case GL_LINES:          primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINELIST;      minCount = 2; break;
+      case GL_LINE_LOOP:      primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINESTRIP;     minCount = 2; break;
+      case GL_LINE_STRIP:     primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINESTRIP;     minCount = 2; break;
+      case GL_TRIANGLES:      primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST;  minCount = 3; break;
+      case GL_TRIANGLE_STRIP: primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP; minCount = 3; break;
+          // emulate fans via rewriting index buffer
+      case GL_TRIANGLE_FAN:   primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST;  minCount = 3; break;
+      default:
+        UNREACHABLE();
+        return false;
+    }
+
+    if (primitiveTopology != mCurrentPrimitiveTopology)
+    {
+        mDeviceContext->IASetPrimitiveTopology(primitiveTopology);
+        mCurrentPrimitiveTopology = primitiveTopology;
+    }
+
+    return count >= minCount;
+}
+
+gl::Error Renderer11::applyRenderTarget(gl::Framebuffer *framebuffer)
+{
+    // Get the color render buffer and serial
+    // Also extract the render target dimensions and view
+    unsigned int renderTargetWidth = 0;
+    unsigned int renderTargetHeight = 0;
+    GLenum renderTargetFormat = 0;
+    unsigned int renderTargetSerials[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS] = {0};
+    ID3D11RenderTargetView* framebufferRTVs[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS] = {NULL};
+    bool missingColorRenderTarget = true;
+
+    const gl::ColorbufferInfo &colorbuffers = framebuffer->getColorbuffersForRender();
+
+    for (size_t colorAttachment = 0; colorAttachment < colorbuffers.size(); ++colorAttachment)
+    {
+        gl::FramebufferAttachment *colorbuffer = colorbuffers[colorAttachment];
+
+        if (colorbuffer)
+        {
+            // the draw buffer must be either "none", "back" for the default buffer or the same index as this color (in order)
+
+            // check for zero-sized default framebuffer, which is a special case.
+            // in this case we do not wish to modify any state and just silently return false.
+            // this will not report any gl error but will cause the calling method to return.
+            if (colorbuffer->getWidth() == 0 || colorbuffer->getHeight() == 0)
+            {
+                return gl::Error(GL_NO_ERROR);
+            }
+
+            renderTargetSerials[colorAttachment] = GetAttachmentSerial(colorbuffer);
+
+            // Extract the render target dimensions and view
+            RenderTarget11 *renderTarget = d3d11::GetAttachmentRenderTarget(colorbuffer);
+            if (!renderTarget)
+            {
+                return gl::Error(GL_OUT_OF_MEMORY, "Internal render target pointer unexpectedly null.");
+            }
+
+            framebufferRTVs[colorAttachment] = renderTarget->getRenderTargetView();
+            if (!framebufferRTVs[colorAttachment])
+            {
+                return gl::Error(GL_OUT_OF_MEMORY, "Internal render target view pointer unexpectedly null.");
+            }
+
+            if (missingColorRenderTarget)
+            {
+                renderTargetWidth = colorbuffer->getWidth();
+                renderTargetHeight = colorbuffer->getHeight();
+                renderTargetFormat = colorbuffer->getActualFormat();
+                missingColorRenderTarget = false;
+            }
+
+            // TODO: Detect if this color buffer is already bound as a texture and unbind it first to prevent
+            //       D3D11 warnings.
+        }
+    }
+
+    // Get the depth stencil render buffter and serials
+    gl::FramebufferAttachment *depthStencil = framebuffer->getDepthbuffer();
+    unsigned int depthbufferSerial = 0;
+    unsigned int stencilbufferSerial = 0;
+    if (depthStencil)
+    {
+        depthbufferSerial = GetAttachmentSerial(depthStencil);
+    }
+    else if (framebuffer->getStencilbuffer())
+    {
+        depthStencil = framebuffer->getStencilbuffer();
+        stencilbufferSerial = GetAttachmentSerial(depthStencil);
+    }
+
+    ID3D11DepthStencilView* framebufferDSV = NULL;
+    if (depthStencil)
+    {
+        RenderTarget11 *depthStencilRenderTarget = d3d11::GetAttachmentRenderTarget(depthStencil);
+        if (!depthStencilRenderTarget)
+        {
+            SafeRelease(framebufferRTVs);
+            return gl::Error(GL_OUT_OF_MEMORY, "Internal render target pointer unexpectedly null.");
+        }
+
+        framebufferDSV = depthStencilRenderTarget->getDepthStencilView();
+        if (!framebufferDSV)
+        {
+            SafeRelease(framebufferRTVs);
+            return gl::Error(GL_OUT_OF_MEMORY, "Internal depth stencil view pointer unexpectedly null.");
+        }
+
+        // If there is no render buffer, the width, height and format values come from
+        // the depth stencil
+        if (missingColorRenderTarget)
+        {
+            renderTargetWidth = depthStencil->getWidth();
+            renderTargetHeight = depthStencil->getHeight();
+            renderTargetFormat = depthStencil->getActualFormat();
+        }
+    }
+
+    // Apply the render target and depth stencil
+    if (!mRenderTargetDescInitialized || !mDepthStencilInitialized ||
+        memcmp(renderTargetSerials, mAppliedRenderTargetSerials, sizeof(renderTargetSerials)) != 0 ||
+        depthbufferSerial != mAppliedDepthbufferSerial ||
+        stencilbufferSerial != mAppliedStencilbufferSerial)
+    {
+        mDeviceContext->OMSetRenderTargets(getRendererCaps().maxDrawBuffers, framebufferRTVs, framebufferDSV);
+
+        mRenderTargetDesc.width = renderTargetWidth;
+        mRenderTargetDesc.height = renderTargetHeight;
+        mRenderTargetDesc.format = renderTargetFormat;
+        mForceSetViewport = true;
+        mForceSetScissor = true;
+        mForceSetBlendState = true;
+
+        if (!mDepthStencilInitialized)
+        {
+            mForceSetRasterState = true;
+        }
+
+        for (unsigned int rtIndex = 0; rtIndex < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; rtIndex++)
+        {
+            mAppliedRenderTargetSerials[rtIndex] = renderTargetSerials[rtIndex];
+        }
+        mAppliedDepthbufferSerial = depthbufferSerial;
+        mAppliedStencilbufferSerial = stencilbufferSerial;
+        mRenderTargetDescInitialized = true;
+        mDepthStencilInitialized = true;
+    }
+
+    invalidateFramebufferSwizzles(framebuffer);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::applyVertexBuffer(gl::ProgramBinary *programBinary, const gl::VertexAttribute vertexAttributes[], const gl::VertexAttribCurrentValueData currentValues[],
+                                        GLint first, GLsizei count, GLsizei instances)
+{
+    TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS];
+    gl::Error error = mVertexDataManager->prepareVertexData(vertexAttributes, currentValues, programBinary, first, count, attributes, instances);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    return mInputLayoutCache.applyVertexBuffers(attributes, programBinary);
+}
+
+gl::Error Renderer11::applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo)
+{
+    gl::Error error = mIndexDataManager->prepareIndexData(type, count, elementArrayBuffer, indices, indexInfo);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    ID3D11Buffer *buffer = NULL;
+    DXGI_FORMAT bufferFormat = (indexInfo->indexType == GL_UNSIGNED_INT) ? DXGI_FORMAT_R32_UINT : DXGI_FORMAT_R16_UINT;
+
+    if (indexInfo->storage)
+    {
+        Buffer11 *storage = Buffer11::makeBuffer11(indexInfo->storage);
+        buffer = storage->getBuffer(BUFFER_USAGE_INDEX);
+    }
+    else
+    {
+        IndexBuffer11* indexBuffer = IndexBuffer11::makeIndexBuffer11(indexInfo->indexBuffer);
+        buffer = indexBuffer->getBuffer();
+    }
+
+    if (buffer != mAppliedIB || bufferFormat != mAppliedIBFormat || indexInfo->startOffset != mAppliedIBOffset)
+    {
+        mDeviceContext->IASetIndexBuffer(buffer, bufferFormat, indexInfo->startOffset);
+
+        mAppliedIB = buffer;
+        mAppliedIBFormat = bufferFormat;
+        mAppliedIBOffset = indexInfo->startOffset;
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Renderer11::applyTransformFeedbackBuffers(gl::Buffer *transformFeedbackBuffers[], GLintptr offsets[])
+{
+    ID3D11Buffer* d3dBuffers[gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+    UINT d3dOffsets[gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+    bool requiresUpdate = false;
+    for (size_t i = 0; i < gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
+    {
+        if (transformFeedbackBuffers[i])
+        {
+            Buffer11 *storage = Buffer11::makeBuffer11(transformFeedbackBuffers[i]->getImplementation());
+            ID3D11Buffer *buffer = storage->getBuffer(BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK);
+
+            d3dBuffers[i] = buffer;
+            d3dOffsets[i] = (mAppliedTFBuffers[i] != buffer) ? static_cast<UINT>(offsets[i]) : -1;
+        }
+        else
+        {
+            d3dBuffers[i] = NULL;
+            d3dOffsets[i] = 0;
+        }
+
+        if (d3dBuffers[i] != mAppliedTFBuffers[i] || offsets[i] != mAppliedTFOffsets[i])
+        {
+            requiresUpdate = true;
+        }
+    }
+
+    if (requiresUpdate)
+    {
+        mDeviceContext->SOSetTargets(ArraySize(d3dBuffers), d3dBuffers, d3dOffsets);
+        for (size_t i = 0; i < gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
+        {
+            mAppliedTFBuffers[i] = d3dBuffers[i];
+            mAppliedTFOffsets[i] = offsets[i];
+        }
+    }
+}
+
+gl::Error Renderer11::drawArrays(GLenum mode, GLsizei count, GLsizei instances, bool transformFeedbackActive)
+{
+    if (mode == GL_POINTS && transformFeedbackActive)
+    {
+        // Since point sprites are generated with a geometry shader, too many vertices will
+        // be written if transform feedback is active.  To work around this, draw only the points
+        // with the stream out shader and no pixel shader to feed the stream out buffers and then 
+        // draw again with the point sprite geometry shader to rasterize the point sprites.
+
+        mDeviceContext->PSSetShader(NULL, NULL, 0);
+
+        if (instances > 0)
+        {
+            mDeviceContext->DrawInstanced(count, instances, 0, 0);
+        }
+        else
+        {
+            mDeviceContext->Draw(count, 0);
+        }
+
+        mDeviceContext->GSSetShader(mCurPointGeometryShader, NULL, 0);
+        mDeviceContext->PSSetShader(mAppliedPixelShader, NULL, 0);
+
+        if (instances > 0)
+        {
+            mDeviceContext->DrawInstanced(count, instances, 0, 0);
+        }
+        else
+        {
+            mDeviceContext->Draw(count, 0);
+        }
+
+        mDeviceContext->GSSetShader(mAppliedGeometryShader, NULL, 0);
+
+        return gl::Error(GL_NO_ERROR);
+    }
+    else if (mode == GL_LINE_LOOP)
+    {
+        return drawLineLoop(count, GL_NONE, NULL, 0, NULL);
+    }
+    else if (mode == GL_TRIANGLE_FAN)
+    {
+        return drawTriangleFan(count, GL_NONE, NULL, 0, NULL, instances);
+    }
+    else if (instances > 0)
+    {
+        mDeviceContext->DrawInstanced(count, instances, 0, 0);
+        return gl::Error(GL_NO_ERROR);
+    }
+    else
+    {
+        mDeviceContext->Draw(count, 0);
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+gl::Error Renderer11::drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices,
+                                   gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances)
+{
+    int minIndex = static_cast<int>(indexInfo.indexRange.start);
+
+    if (mode == GL_LINE_LOOP)
+    {
+        return drawLineLoop(count, type, indices, minIndex, elementArrayBuffer);
+    }
+    else if (mode == GL_TRIANGLE_FAN)
+    {
+        return drawTriangleFan(count, type, indices, minIndex, elementArrayBuffer, instances);
+    }
+    else if (instances > 0)
+    {
+        mDeviceContext->DrawIndexedInstanced(count, instances, 0, -minIndex, 0);
+        return gl::Error(GL_NO_ERROR);
+    }
+    else
+    {
+        mDeviceContext->DrawIndexed(count, 0, -minIndex);
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+template<typename T>
+static void fillLineLoopIndices(GLenum type, GLsizei count, const GLvoid *indices, T *data)
+{
+    switch (type)
+    {
+      case GL_NONE:   // Non-indexed draw
+        for (int i = 0; i < count; i++)
+        {
+            data[i] = i;
+        }
+        data[count] = 0;
+        break;
+      case GL_UNSIGNED_BYTE:
+        for (int i = 0; i < count; i++)
+        {
+            data[i] = static_cast<const GLubyte*>(indices)[i];
+        }
+        data[count] = static_cast<const GLubyte*>(indices)[0];
+        break;
+      case GL_UNSIGNED_SHORT:
+        for (int i = 0; i < count; i++)
+        {
+            data[i] = static_cast<const GLushort*>(indices)[i];
+        }
+        data[count] = static_cast<const GLushort*>(indices)[0];
+        break;
+      case GL_UNSIGNED_INT:
+        for (int i = 0; i < count; i++)
+        {
+            data[i] = static_cast<const GLuint*>(indices)[i];
+        }
+        data[count] = static_cast<const GLuint*>(indices)[0];
+        break;
+      default: UNREACHABLE();
+    }
+}
+
+template<typename T>
+static void fillTriangleFanIndices(GLenum type, unsigned int numTris, const GLvoid *indices, T *data)
+{
+    switch (type)
+    {
+      case GL_NONE:   // Non-indexed draw
+        for (unsigned int i = 0; i < numTris; i++)
+        {
+            data[i*3 + 0] = 0;
+            data[i*3 + 1] = i + 1;
+            data[i*3 + 2] = i + 2;
+        }
+        break;
+      case GL_UNSIGNED_BYTE:
+        for (unsigned int i = 0; i < numTris; i++)
+        {
+            data[i*3 + 0] = static_cast<const GLubyte*>(indices)[0];
+            data[i*3 + 1] = static_cast<const GLubyte*>(indices)[i + 1];
+            data[i*3 + 2] = static_cast<const GLubyte*>(indices)[i + 2];
+        }
+        break;
+      case GL_UNSIGNED_SHORT:
+        for (unsigned int i = 0; i < numTris; i++)
+        {
+            data[i*3 + 0] = static_cast<const GLushort*>(indices)[0];
+            data[i*3 + 1] = static_cast<const GLushort*>(indices)[i + 1];
+            data[i*3 + 2] = static_cast<const GLushort*>(indices)[i + 2];
+        }
+        break;
+      case GL_UNSIGNED_INT:
+        for (unsigned int i = 0; i < numTris; i++)
+        {
+            data[i*3 + 0] = static_cast<const GLuint*>(indices)[0];
+            data[i*3 + 1] = static_cast<const GLuint*>(indices)[i + 1];
+            data[i*3 + 2] = static_cast<const GLuint*>(indices)[i + 2];
+        }
+        break;
+      default: UNREACHABLE();
+    }
+}
+
+gl::Error Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
+{
+    // Get the raw indices for an indexed draw
+    if (type != GL_NONE && elementArrayBuffer)
+    {
+        gl::Buffer *indexBuffer = elementArrayBuffer;
+        BufferImpl *storage = indexBuffer->getImplementation();
+        intptr_t offset = reinterpret_cast<intptr_t>(indices);
+        indices = static_cast<const GLubyte*>(storage->getData()) + offset;
+    }
+
+    // TODO: some level 9 hardware supports 32-bit indices; test and store support instead
+    const int indexType = isLevel9() ? GL_UNSIGNED_SHORT : GL_UNSIGNED_INT;
+
+    if (!mLineLoopIB)
+    {
+        mLineLoopIB = new StreamingIndexBufferInterface(this);
+        gl::Error error = mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType);
+        if (error.isError())
+        {
+            SafeDelete(mLineLoopIB);
+            return error;
+        }
+    }
+
+    // Checked by Renderer11::applyPrimitiveType
+    ASSERT(count >= 0);
+
+    int indexTypeSize = indexType == GL_UNSIGNED_SHORT ? sizeof(unsigned short) : sizeof(unsigned int);
+    if (static_cast<unsigned int>(count) + 1 > (std::numeric_limits<unsigned int>::max() / indexTypeSize))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to create a 32-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
+    }
+
+    const unsigned int spaceNeeded = (static_cast<unsigned int>(count) + 1) * sizeof(unsigned int);
+    gl::Error error = mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    void* mappedMemory = NULL;
+    unsigned int offset;
+    error = mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    if (indexType == GL_UNSIGNED_SHORT)
+        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned short*>(mappedMemory));
+    else
+        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned int*>(mappedMemory));
+    unsigned int indexBufferOffset = offset;
+
+    error = mLineLoopIB->unmapBuffer();
+    if (error.isError())
+    {
+        return error;
+    }
+
+    IndexBuffer11 *indexBuffer = IndexBuffer11::makeIndexBuffer11(mLineLoopIB->getIndexBuffer());
+    ID3D11Buffer *d3dIndexBuffer = indexBuffer->getBuffer();
+    DXGI_FORMAT indexFormat = indexBuffer->getIndexFormat();
+
+    if (mAppliedIB != d3dIndexBuffer || mAppliedIBFormat != indexFormat || mAppliedIBOffset != indexBufferOffset)
+    {
+        mDeviceContext->IASetIndexBuffer(d3dIndexBuffer, indexFormat, indexBufferOffset);
+        mAppliedIB = d3dIndexBuffer;
+        mAppliedIBFormat = indexFormat;
+        mAppliedIBOffset = indexBufferOffset;
+    }
+
+    mDeviceContext->DrawIndexed(count + 1, 0, -minIndex);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer, int instances)
+{
+    // Get the raw indices for an indexed draw
+    if (type != GL_NONE && elementArrayBuffer)
+    {
+        gl::Buffer *indexBuffer = elementArrayBuffer;
+        BufferImpl *storage = indexBuffer->getImplementation();
+        intptr_t offset = reinterpret_cast<intptr_t>(indices);
+        indices = static_cast<const GLubyte*>(storage->getData()) + offset;
+    }
+
+    const int indexType = isLevel9() ? GL_UNSIGNED_SHORT : GL_UNSIGNED_INT;
+
+    if (!mTriangleFanIB)
+    {
+        mTriangleFanIB = new StreamingIndexBufferInterface(this);
+        gl::Error error = mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType);
+        if (error.isError())
+        {
+            SafeDelete(mTriangleFanIB);
+            return error;
+        }
+    }
+
+    // Checked by Renderer11::applyPrimitiveType
+    ASSERT(count >= 3);
+
+    const unsigned int numTris = count - 2;
+
+    int indexTypeSize = indexType == GL_UNSIGNED_SHORT ? sizeof(unsigned short) : sizeof(unsigned int);
+    if (numTris > (std::numeric_limits<unsigned int>::max() / (indexTypeSize * 3)))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to create a scratch index buffer for GL_TRIANGLE_FAN, too many indices required.");
+    }
+
+    const unsigned int spaceNeeded = (numTris * 3) * indexTypeSize;
+    gl::Error error = mTriangleFanIB->reserveBufferSpace(spaceNeeded, indexType);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    void* mappedMemory = NULL;
+    unsigned int offset;
+    error = mTriangleFanIB->mapBuffer(spaceNeeded, &mappedMemory, &offset);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    if (indexType == GL_UNSIGNED_SHORT)
+        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned short*>(mappedMemory));
+    else
+        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned int*>(mappedMemory));
+
+    unsigned int indexBufferOffset = offset;
+
+    error = mTriangleFanIB->unmapBuffer();
+    if (error.isError())
+    {
+        return error;
+    }
+
+    IndexBuffer11 *indexBuffer = IndexBuffer11::makeIndexBuffer11(mTriangleFanIB->getIndexBuffer());
+    ID3D11Buffer *d3dIndexBuffer = indexBuffer->getBuffer();
+    DXGI_FORMAT indexFormat = indexBuffer->getIndexFormat();
+
+    if (mAppliedIB != d3dIndexBuffer || mAppliedIBFormat != indexFormat || mAppliedIBOffset != indexBufferOffset)
+    {
+        mDeviceContext->IASetIndexBuffer(d3dIndexBuffer, indexFormat, indexBufferOffset);
+        mAppliedIB = d3dIndexBuffer;
+        mAppliedIBFormat = indexFormat;
+        mAppliedIBOffset = indexBufferOffset;
+    }
+
+    if (instances > 0)
+    {
+        mDeviceContext->DrawIndexedInstanced(numTris * 3, instances, 0, -minIndex, 0);
+    }
+    else
+    {
+        mDeviceContext->DrawIndexed(numTris * 3, 0, -minIndex);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::applyShaders(gl::ProgramBinary *programBinary, const gl::VertexFormat inputLayout[], const gl::Framebuffer *framebuffer,
+                                   bool rasterizerDiscard, bool transformFeedbackActive)
+{
+    ShaderExecutable *vertexExe = programBinary->getVertexExecutableForInputLayout(inputLayout);
+    ShaderExecutable *pixelExe = programBinary->getPixelExecutableForFramebuffer(framebuffer);
+    ShaderExecutable *geometryExe = programBinary->getGeometryExecutable();
+
+    ID3D11VertexShader *vertexShader = (vertexExe ? ShaderExecutable11::makeShaderExecutable11(vertexExe)->getVertexShader() : NULL);
+
+    ID3D11PixelShader *pixelShader = NULL;
+    // Skip pixel shader if we're doing rasterizer discard.
+    if (!rasterizerDiscard)
+    {
+        pixelShader = (pixelExe ? ShaderExecutable11::makeShaderExecutable11(pixelExe)->getPixelShader() : NULL);
+    }
+
+    ID3D11GeometryShader *geometryShader = NULL;
+    if (transformFeedbackActive)
+    {
+        geometryShader = (vertexExe ? ShaderExecutable11::makeShaderExecutable11(vertexExe)->getStreamOutShader() : NULL);
+    }
+    else if (mCurRasterState.pointDrawMode)
+    {
+        geometryShader = (geometryExe ? ShaderExecutable11::makeShaderExecutable11(geometryExe)->getGeometryShader() : NULL);
+    }
+
+    bool dirtyUniforms = false;
+
+    if (vertexShader != mAppliedVertexShader)
+    {
+        mDeviceContext->VSSetShader(vertexShader, NULL, 0);
+        mAppliedVertexShader = vertexShader;
+        dirtyUniforms = true;
+    }
+
+    if (geometryShader != mAppliedGeometryShader)
+    {
+        mDeviceContext->GSSetShader(geometryShader, NULL, 0);
+        mAppliedGeometryShader = geometryShader;
+        dirtyUniforms = true;
+    }
+
+    if (geometryExe && mCurRasterState.pointDrawMode)
+    {
+        mCurPointGeometryShader = ShaderExecutable11::makeShaderExecutable11(geometryExe)->getGeometryShader();
+    }
+    else
+    {
+        mCurPointGeometryShader = NULL;
+    }
+
+    if (pixelShader != mAppliedPixelShader)
+    {
+        mDeviceContext->PSSetShader(pixelShader, NULL, 0);
+        mAppliedPixelShader = pixelShader;
+        dirtyUniforms = true;
+    }
+
+    if (dirtyUniforms)
+    {
+        programBinary->dirtyAllUniforms();
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::applyUniforms(const gl::ProgramBinary &programBinary)
+{
+    const std::vector<gl::LinkedUniform*> &uniformArray = programBinary.getUniforms();
+
+    unsigned int totalRegisterCountVS = 0;
+    unsigned int totalRegisterCountPS = 0;
+
+    bool vertexUniformsDirty = false;
+    bool pixelUniformsDirty = false;
+
+    for (size_t uniformIndex = 0; uniformIndex < uniformArray.size(); uniformIndex++)
+    {
+        const gl::LinkedUniform &uniform = *uniformArray[uniformIndex];
+
+        if (uniform.isReferencedByVertexShader() && !uniform.isSampler())
+        {
+            totalRegisterCountVS += uniform.registerCount;
+            vertexUniformsDirty = (vertexUniformsDirty || uniform.dirty);
+        }
+
+        if (uniform.isReferencedByFragmentShader() && !uniform.isSampler())
+        {
+            totalRegisterCountPS += uniform.registerCount;
+            pixelUniformsDirty = (pixelUniformsDirty || uniform.dirty);
+        }
+    }
+
+    const ProgramD3D *programD3D = ProgramD3D::makeProgramD3D(programBinary.getImplementation());
+    const UniformStorage11 *vertexUniformStorage = UniformStorage11::makeUniformStorage11(&programD3D->getVertexUniformStorage());
+    const UniformStorage11 *fragmentUniformStorage = UniformStorage11::makeUniformStorage11(&programD3D->getFragmentUniformStorage());
+    ASSERT(vertexUniformStorage);
+    ASSERT(fragmentUniformStorage);
+
+    ID3D11Buffer *vertexConstantBuffer = vertexUniformStorage->getConstantBuffer();
+    ID3D11Buffer *pixelConstantBuffer = fragmentUniformStorage->getConstantBuffer();
+
+    float (*mapVS)[4] = NULL;
+    float (*mapPS)[4] = NULL;
+
+    if (totalRegisterCountVS > 0 && vertexUniformsDirty)
+    {
+        D3D11_MAPPED_SUBRESOURCE map = {0};
+        HRESULT result = mDeviceContext->Map(vertexConstantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &map);
+        UNUSED_ASSERTION_VARIABLE(result);
+        ASSERT(SUCCEEDED(result));
+        mapVS = (float(*)[4])map.pData;
+    }
+
+    if (totalRegisterCountPS > 0 && pixelUniformsDirty)
+    {
+        D3D11_MAPPED_SUBRESOURCE map = {0};
+        HRESULT result = mDeviceContext->Map(pixelConstantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &map);
+        UNUSED_ASSERTION_VARIABLE(result);
+        ASSERT(SUCCEEDED(result));
+        mapPS = (float(*)[4])map.pData;
+    }
+
+    for (size_t uniformIndex = 0; uniformIndex < uniformArray.size(); uniformIndex++)
+    {
+        gl::LinkedUniform *uniform = uniformArray[uniformIndex];
+
+        if (!uniform->isSampler())
+        {
+            unsigned int componentCount = (4 - uniform->registerElement);
+
+            // we assume that uniforms from structs are arranged in struct order in our uniforms list. otherwise we would
+            // overwrite previously written regions of memory.
+
+            if (uniform->isReferencedByVertexShader() && mapVS)
+            {
+                memcpy(&mapVS[uniform->vsRegisterIndex][uniform->registerElement], uniform->data, uniform->registerCount * sizeof(float) * componentCount);
+            }
+
+            if (uniform->isReferencedByFragmentShader() && mapPS)
+            {
+                memcpy(&mapPS[uniform->psRegisterIndex][uniform->registerElement], uniform->data, uniform->registerCount * sizeof(float) * componentCount);
+            }
+        }
+    }
+
+    if (mapVS)
+    {
+        mDeviceContext->Unmap(vertexConstantBuffer, 0);
+    }
+
+    if (mapPS)
+    {
+        mDeviceContext->Unmap(pixelConstantBuffer, 0);
+    }
+
+    if (mCurrentVertexConstantBuffer != vertexConstantBuffer)
+    {
+        mDeviceContext->VSSetConstantBuffers(0, 1, &vertexConstantBuffer);
+        mCurrentVertexConstantBuffer = vertexConstantBuffer;
+    }
+
+    if (mCurrentPixelConstantBuffer != pixelConstantBuffer)
+    {
+        mDeviceContext->PSSetConstantBuffers(0, 1, &pixelConstantBuffer);
+        mCurrentPixelConstantBuffer = pixelConstantBuffer;
+    }
+
+    // Driver uniforms
+    if (!mDriverConstantBufferVS)
+    {
+        D3D11_BUFFER_DESC constantBufferDescription = {0};
+        constantBufferDescription.ByteWidth = sizeof(dx_VertexConstants);
+        constantBufferDescription.Usage = D3D11_USAGE_DEFAULT;
+        constantBufferDescription.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
+        constantBufferDescription.CPUAccessFlags = 0;
+        constantBufferDescription.MiscFlags = 0;
+        constantBufferDescription.StructureByteStride = 0;
+
+        HRESULT result = mDevice->CreateBuffer(&constantBufferDescription, NULL, &mDriverConstantBufferVS);
+        UNUSED_ASSERTION_VARIABLE(result);
+        ASSERT(SUCCEEDED(result));
+
+        mDeviceContext->VSSetConstantBuffers(1, 1, &mDriverConstantBufferVS);
+    }
+
+    if (!mDriverConstantBufferPS)
+    {
+        D3D11_BUFFER_DESC constantBufferDescription = {0};
+        constantBufferDescription.ByteWidth = sizeof(dx_PixelConstants);
+        constantBufferDescription.Usage = D3D11_USAGE_DEFAULT;
+        constantBufferDescription.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
+        constantBufferDescription.CPUAccessFlags = 0;
+        constantBufferDescription.MiscFlags = 0;
+        constantBufferDescription.StructureByteStride = 0;
+
+        HRESULT result = mDevice->CreateBuffer(&constantBufferDescription, NULL, &mDriverConstantBufferPS);
+        UNUSED_ASSERTION_VARIABLE(result);
+        ASSERT(SUCCEEDED(result));
+
+        mDeviceContext->PSSetConstantBuffers(1, 1, &mDriverConstantBufferPS);
+    }
+
+    if (memcmp(&mVertexConstants, &mAppliedVertexConstants, sizeof(dx_VertexConstants)) != 0)
+    {
+        mDeviceContext->UpdateSubresource(mDriverConstantBufferVS, 0, NULL, &mVertexConstants, 16, 0);
+        memcpy(&mAppliedVertexConstants, &mVertexConstants, sizeof(dx_VertexConstants));
+    }
+
+    if (memcmp(&mPixelConstants, &mAppliedPixelConstants, sizeof(dx_PixelConstants)) != 0)
+    {
+        mDeviceContext->UpdateSubresource(mDriverConstantBufferPS, 0, NULL, &mPixelConstants, 16, 0);
+        memcpy(&mAppliedPixelConstants, &mPixelConstants, sizeof(dx_PixelConstants));
+    }
+
+    // needed for the point sprite geometry shader
+    if (mFeatureLevel >= D3D_FEATURE_LEVEL_10_0 && mCurrentGeometryConstantBuffer != mDriverConstantBufferPS)
+    {
+        mDeviceContext->GSSetConstantBuffers(0, 1, &mDriverConstantBufferPS);
+        mCurrentGeometryConstantBuffer = mDriverConstantBufferPS;
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer11::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer)
+{
+    gl::Error error = mClear->clearFramebuffer(clearParams, frameBuffer);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    invalidateFramebufferSwizzles(frameBuffer);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Renderer11::markAllStateDirty()
+{
+    for (unsigned int rtIndex = 0; rtIndex < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; rtIndex++)
+    {
+        mAppliedRenderTargetSerials[rtIndex] = 0;
+    }
+    mAppliedDepthbufferSerial = 0;
+    mAppliedStencilbufferSerial = 0;
+    mDepthStencilInitialized = false;
+    mRenderTargetDescInitialized = false;
+
+    ASSERT(mForceSetVertexSamplerStates.size() == mCurVertexSRVs.size());
+    for (size_t vsamplerId = 0; vsamplerId < mForceSetVertexSamplerStates.size(); ++vsamplerId)
+    {
+        mForceSetVertexSamplerStates[vsamplerId] = true;
+        mCurVertexSRVs[vsamplerId] = NULL;
+    }
+
+    ASSERT(mForceSetPixelSamplerStates.size() == mCurPixelSRVs.size());
+    for (size_t fsamplerId = 0; fsamplerId < mForceSetPixelSamplerStates.size(); ++fsamplerId)
+    {
+        mForceSetPixelSamplerStates[fsamplerId] = true;
+        mCurPixelSRVs[fsamplerId] = NULL;
+    }
+
+    mForceSetBlendState = true;
+    mForceSetRasterState = true;
+    mForceSetDepthStencilState = true;
+    mForceSetScissor = true;
+    mForceSetViewport = true;
+
+    mAppliedIB = NULL;
+    mAppliedIBFormat = DXGI_FORMAT_UNKNOWN;
+    mAppliedIBOffset = 0;
+
+    mAppliedVertexShader = NULL;
+    mAppliedGeometryShader = NULL;
+    mCurPointGeometryShader = NULL;
+    mAppliedPixelShader = NULL;
+
+    for (size_t i = 0; i < gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS; i++)
+    {
+        mAppliedTFBuffers[i] = NULL;
+        mAppliedTFOffsets[i] = 0;
+    }
+
+    memset(&mAppliedVertexConstants, 0, sizeof(dx_VertexConstants));
+    memset(&mAppliedPixelConstants, 0, sizeof(dx_PixelConstants));
+
+    mInputLayoutCache.markDirty();
+
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS; i++)
+    {
+        mCurrentConstantBufferVS[i] = -1;
+        mCurrentConstantBufferPS[i] = -1;
+    }
+
+    mCurrentVertexConstantBuffer = NULL;
+    mCurrentPixelConstantBuffer = NULL;
+    mCurrentGeometryConstantBuffer = NULL;
+
+    mCurrentPrimitiveTopology = D3D_PRIMITIVE_TOPOLOGY_UNDEFINED;
+}
+
+void Renderer11::releaseDeviceResources()
+{
+    mStateCache.clear();
+    mInputLayoutCache.clear();
+
+    SafeDelete(mVertexDataManager);
+    SafeDelete(mIndexDataManager);
+    SafeDelete(mLineLoopIB);
+    SafeDelete(mTriangleFanIB);
+    SafeDelete(mBlit);
+    SafeDelete(mClear);
+    SafeDelete(mPixelTransfer);
+
+    SafeRelease(mDriverConstantBufferVS);
+    SafeRelease(mDriverConstantBufferPS);
+    SafeRelease(mSyncQuery);
+}
+
+void Renderer11::notifyDeviceLost()
+{
+    mDeviceLost = true;
+    mDisplay->notifyDeviceLost();
+}
+
+bool Renderer11::isDeviceLost()
+{
+    return mDeviceLost;
+}
+
+// set notify to true to broadcast a message to all contexts of the device loss
+bool Renderer11::testDeviceLost(bool notify)
+{
+    bool isLost = false;
+
+    // GetRemovedReason is used to test if the device is removed
+    HRESULT result = mDevice->GetDeviceRemovedReason();
+    isLost = d3d11::isDeviceLostError(result);
+
+    if (isLost)
+    {
+        // Log error if this is a new device lost event
+        if (mDeviceLost == false)
+        {
+            ERR("The D3D11 device was removed: 0x%08X", result);
+        }
+
+        // ensure we note the device loss --
+        // we'll probably get this done again by notifyDeviceLost
+        // but best to remember it!
+        // Note that we don't want to clear the device loss status here
+        // -- this needs to be done by resetDevice
+        mDeviceLost = true;
+        if (notify)
+        {
+            notifyDeviceLost();
+        }
+    }
+
+    return isLost;
+}
+
+bool Renderer11::testDeviceResettable()
+{
+    // determine if the device is resettable by creating a dummy device
+    PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = (PFN_D3D11_CREATE_DEVICE)GetProcAddress(mD3d11Module, "D3D11CreateDevice");
+
+    if (D3D11CreateDevice == NULL)
+    {
+        return false;
+    }
+
+    D3D_FEATURE_LEVEL featureLevels[] =
+    {
+        D3D_FEATURE_LEVEL_11_0,
+        D3D_FEATURE_LEVEL_10_1,
+        D3D_FEATURE_LEVEL_10_0,
+#if !defined(ANGLE_ENABLE_D3D9)
+        D3D_FEATURE_LEVEL_9_3,
+        D3D_FEATURE_LEVEL_9_2,
+        D3D_FEATURE_LEVEL_9_1,
+#endif
+    };
+
+    ID3D11Device* dummyDevice;
+    D3D_FEATURE_LEVEL dummyFeatureLevel;
+    ID3D11DeviceContext* dummyContext;
+
+    HRESULT result = D3D11CreateDevice(NULL,
+                                       D3D_DRIVER_TYPE_HARDWARE,
+                                       NULL,
+                                       #if defined(_DEBUG)
+                                       D3D11_CREATE_DEVICE_DEBUG,
+                                       #else
+                                       0,
+                                       #endif
+                                       featureLevels,
+                                       ArraySize(featureLevels),
+                                       D3D11_SDK_VERSION,
+                                       &dummyDevice,
+                                       &dummyFeatureLevel,
+                                       &dummyContext);
+
+    if (!mDevice || FAILED(result))
+    {
+        return false;
+    }
+
+    SafeRelease(dummyContext);
+    SafeRelease(dummyDevice);
+
+    return true;
+}
+
+void Renderer11::release()
+{
+    releaseShaderCompiler();
+    releaseDeviceResources();
+
+    SafeRelease(mDxgiFactory);
+    SafeRelease(mDxgiAdapter);
+
+    if (mDeviceContext)
+    {
+        mDeviceContext->ClearState();
+        mDeviceContext->Flush();
+        SafeRelease(mDeviceContext);
+    }
+
+    SafeRelease(mDevice);
+
+    if (mD3d11Module)
+    {
+        FreeLibrary(mD3d11Module);
+        mD3d11Module = NULL;
+    }
+
+    if (mDxgiModule)
+    {
+        FreeLibrary(mDxgiModule);
+        mDxgiModule = NULL;
+    }
+
+    mCompiler.release();
+}
+
+bool Renderer11::resetDevice()
+{
+    // recreate everything
+    release();
+    EGLint result = initialize();
+
+    if (result != EGL_SUCCESS)
+    {
+        ERR("Could not reinitialize D3D11 device: %08X", result);
+        return false;
+    }
+
+    mDeviceLost = false;
+
+    return true;
+}
+
+DWORD Renderer11::getAdapterVendor() const
+{
+    return mAdapterDescription.VendorId;
+}
+
+std::string Renderer11::getRendererDescription() const
+{
+    std::ostringstream rendererString;
+
+    rendererString << mDescription;
+    rendererString << " Direct3D11";
+
+    rendererString << " vs_" << getMajorShaderModel() << "_" << getMinorShaderModel();
+    rendererString << " ps_" << getMajorShaderModel() << "_" << getMinorShaderModel();
+
+    return rendererString.str();
+}
+
+GUID Renderer11::getAdapterIdentifier() const
+{
+    // Use the adapter LUID as our adapter ID
+    // This number is local to a machine is only guaranteed to be unique between restarts
+    META_ASSERT(sizeof(LUID) <= sizeof(GUID));
+    GUID adapterId = {0};
+    memcpy(&adapterId, &mAdapterDescription.AdapterLuid, sizeof(LUID));
+    return adapterId;
+}
+
+unsigned int Renderer11::getReservedVertexUniformVectors() const
+{
+    return 0;   // Driver uniforms are stored in a separate constant buffer
+}
+
+unsigned int Renderer11::getReservedFragmentUniformVectors() const
+{
+    return 0;   // Driver uniforms are stored in a separate constant buffer
+}
+
+unsigned int Renderer11::getReservedVertexUniformBuffers() const
+{
+    // we reserve one buffer for the application uniforms, and one for driver uniforms
+    return 2;
+}
+
+unsigned int Renderer11::getReservedFragmentUniformBuffers() const
+{
+    // we reserve one buffer for the application uniforms, and one for driver uniforms
+    return 2;
+}
+
+bool Renderer11::getShareHandleSupport() const
+{
+    // We only currently support share handles with BGRA surfaces, because
+    // chrome needs BGRA. Once chrome fixes this, we should always support them.
+    // PIX doesn't seem to support using share handles, so disable them.
+    return getRendererExtensions().textureFormatBGRA8888 && !gl::perfActive();
+}
+
+bool Renderer11::getPostSubBufferSupport() const
+{
+    // D3D11 does not support present with dirty rectangles until D3D11.1 and DXGI 1.2.
+    return false;
+}
+
+int Renderer11::getMajorShaderModel() const
+{
+    switch (mFeatureLevel)
+    {
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_SHADER_MAJOR_VERSION;   // 5
+      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SHADER_MAJOR_VERSION; // 4
+      case D3D_FEATURE_LEVEL_10_0:
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MAJOR_VERSION;   // 4
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+int Renderer11::getMinorShaderModel() const
+{
+    switch (mFeatureLevel)
+    {
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_SHADER_MINOR_VERSION;   // 0
+      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SHADER_MINOR_VERSION; // 1
+      case D3D_FEATURE_LEVEL_10_0:
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MINOR_VERSION;   // 0
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+int Renderer11::getMinSwapInterval() const
+{
+    return 0;
+}
+
+int Renderer11::getMaxSwapInterval() const
+{
+    return 4;
+}
+
+bool Renderer11::copyToRenderTarget2D(TextureStorage *dest, TextureStorage *source)
+{
+    if (source && dest)
+    {
+        TextureStorage11_2D *source11 = TextureStorage11_2D::makeTextureStorage11_2D(source);
+        TextureStorage11_2D *dest11 = TextureStorage11_2D::makeTextureStorage11_2D(dest);
+
+        mDeviceContext->CopyResource(dest11->getResource(), source11->getResource());
+
+        dest11->invalidateSwizzleCache();
+
+        return true;
+    }
+
+    return false;
+}
+
+bool Renderer11::copyToRenderTargetCube(TextureStorage *dest, TextureStorage *source)
+{
+    if (source && dest)
+    {
+        TextureStorage11_Cube *source11 = TextureStorage11_Cube::makeTextureStorage11_Cube(source);
+        TextureStorage11_Cube *dest11 = TextureStorage11_Cube::makeTextureStorage11_Cube(dest);
+
+        mDeviceContext->CopyResource(dest11->getResource(), source11->getResource());
+
+        dest11->invalidateSwizzleCache();
+
+        return true;
+    }
+
+    return false;
+}
+
+bool Renderer11::copyToRenderTarget3D(TextureStorage *dest, TextureStorage *source)
+{
+    if (source && dest)
+    {
+        TextureStorage11_3D *source11 = TextureStorage11_3D::makeTextureStorage11_3D(source);
+        TextureStorage11_3D *dest11 = TextureStorage11_3D::makeTextureStorage11_3D(dest);
+
+        mDeviceContext->CopyResource(dest11->getResource(), source11->getResource());
+
+        dest11->invalidateSwizzleCache();
+
+        return true;
+    }
+
+    return false;
+}
+
+bool Renderer11::copyToRenderTarget2DArray(TextureStorage *dest, TextureStorage *source)
+{
+    if (source && dest)
+    {
+        TextureStorage11_2DArray *source11 = TextureStorage11_2DArray::makeTextureStorage11_2DArray(source);
+        TextureStorage11_2DArray *dest11 = TextureStorage11_2DArray::makeTextureStorage11_2DArray(dest);
+
+        mDeviceContext->CopyResource(dest11->getResource(), source11->getResource());
+
+        dest11->invalidateSwizzleCache();
+
+        return true;
+    }
+
+    return false;
+}
+
+bool Renderer11::copyImage2D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level)
+{
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getReadColorbuffer();
+    if (!colorbuffer)
+    {
+        ERR("Failed to retrieve the color buffer from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    RenderTarget11 *sourceRenderTarget = d3d11::GetAttachmentRenderTarget(colorbuffer);
+    if (!sourceRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11ShaderResourceView *source = sourceRenderTarget->getShaderResourceView();
+    if (!source)
+    {
+        ERR("Failed to retrieve the render target view from the render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    TextureStorage11_2D *storage11 = TextureStorage11_2D::makeTextureStorage11_2D(storage);
+    if (!storage11)
+    {
+        ERR("Failed to retrieve the texture storage from the destination.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::ImageIndex index = gl::ImageIndex::Make2D(level);
+    RenderTarget11 *destRenderTarget = RenderTarget11::makeRenderTarget11(storage11->getRenderTarget(index));
+    if (!destRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the destination storage.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11RenderTargetView *dest = destRenderTarget->getRenderTargetView();
+    if (!dest)
+    {
+        ERR("Failed to retrieve the render target view from the destination render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::Box sourceArea(sourceRect.x, sourceRect.y, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents sourceSize(sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(), 1);
+
+    gl::Box destArea(xoffset, yoffset, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents destSize(destRenderTarget->getWidth(), destRenderTarget->getHeight(), 1);
+
+    // Use nearest filtering because source and destination are the same size for the direct
+    // copy
+    bool ret = mBlit->copyTexture(source, sourceArea, sourceSize, dest, destArea, destSize, NULL,
+                                  destFormat, GL_NEAREST);
+
+    storage11->invalidateSwizzleCacheLevel(level);
+
+    return ret;
+}
+
+bool Renderer11::copyImageCube(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                               GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level)
+{
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getReadColorbuffer();
+    if (!colorbuffer)
+    {
+        ERR("Failed to retrieve the color buffer from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    RenderTarget11 *sourceRenderTarget = d3d11::GetAttachmentRenderTarget(colorbuffer);
+    if (!sourceRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11ShaderResourceView *source = sourceRenderTarget->getShaderResourceView();
+    if (!source)
+    {
+        ERR("Failed to retrieve the render target view from the render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    TextureStorage11_Cube *storage11 = TextureStorage11_Cube::makeTextureStorage11_Cube(storage);
+    if (!storage11)
+    {
+        ERR("Failed to retrieve the texture storage from the destination.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::ImageIndex index = gl::ImageIndex::MakeCube(target, level);
+    RenderTarget11 *destRenderTarget = RenderTarget11::makeRenderTarget11(storage11->getRenderTarget(index));
+    if (!destRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the destination storage.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11RenderTargetView *dest = destRenderTarget->getRenderTargetView();
+    if (!dest)
+    {
+        ERR("Failed to retrieve the render target view from the destination render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::Box sourceArea(sourceRect.x, sourceRect.y, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents sourceSize(sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(), 1);
+
+    gl::Box destArea(xoffset, yoffset, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents destSize(destRenderTarget->getWidth(), destRenderTarget->getHeight(), 1);
+
+    // Use nearest filtering because source and destination are the same size for the direct
+    // copy
+    bool ret = mBlit->copyTexture(source, sourceArea, sourceSize, dest, destArea, destSize, NULL,
+                                  destFormat, GL_NEAREST);
+
+    storage11->invalidateSwizzleCacheLevel(level);
+
+    return ret;
+}
+
+bool Renderer11::copyImage3D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level)
+{
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getReadColorbuffer();
+    if (!colorbuffer)
+    {
+        ERR("Failed to retrieve the color buffer from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    RenderTarget11 *sourceRenderTarget = d3d11::GetAttachmentRenderTarget(colorbuffer);
+    if (!sourceRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11ShaderResourceView *source = sourceRenderTarget->getShaderResourceView();
+    if (!source)
+    {
+        ERR("Failed to retrieve the render target view from the render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    TextureStorage11_3D *storage11 = TextureStorage11_3D::makeTextureStorage11_3D(storage);
+    if (!storage11)
+    {
+        ERR("Failed to retrieve the texture storage from the destination.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::ImageIndex index = gl::ImageIndex::Make3D(level, zOffset);
+    RenderTarget11 *destRenderTarget = RenderTarget11::makeRenderTarget11(storage11->getRenderTarget(index));
+    if (!destRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the destination storage.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11RenderTargetView *dest = destRenderTarget->getRenderTargetView();
+    if (!dest)
+    {
+        ERR("Failed to retrieve the render target view from the destination render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::Box sourceArea(sourceRect.x, sourceRect.y, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents sourceSize(sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(), 1);
+
+    gl::Box destArea(xoffset, yoffset, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents destSize(destRenderTarget->getWidth(), destRenderTarget->getHeight(), 1);
+
+    // Use nearest filtering because source and destination are the same size for the direct
+    // copy
+    bool ret = mBlit->copyTexture(source, sourceArea, sourceSize, dest, destArea, destSize, NULL,
+                                  destFormat, GL_NEAREST);
+
+    storage11->invalidateSwizzleCacheLevel(level);
+
+    return ret;
+}
+
+bool Renderer11::copyImage2DArray(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                                  GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level)
+{
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getReadColorbuffer();
+    if (!colorbuffer)
+    {
+        ERR("Failed to retrieve the color buffer from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    RenderTarget11 *sourceRenderTarget = d3d11::GetAttachmentRenderTarget(colorbuffer);
+    if (!sourceRenderTarget)
+    {
+        ERR("Failed to retrieve the render target from the frame buffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11ShaderResourceView *source = sourceRenderTarget->getShaderResourceView();
+    if (!source)
+    {
+        ERR("Failed to retrieve the render target view from the render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    TextureStorage11_2DArray *storage11 = TextureStorage11_2DArray::makeTextureStorage11_2DArray(storage);
+    if (!storage11)
+    {
+        SafeRelease(source);
+        ERR("Failed to retrieve the texture storage from the destination.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::ImageIndex index = gl::ImageIndex::Make2DArray(level, zOffset);
+    RenderTarget11 *destRenderTarget = RenderTarget11::makeRenderTarget11(storage11->getRenderTarget(index));
+    if (!destRenderTarget)
+    {
+        SafeRelease(source);
+        ERR("Failed to retrieve the render target from the destination storage.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11RenderTargetView *dest = destRenderTarget->getRenderTargetView();
+    if (!dest)
+    {
+        ERR("Failed to retrieve the render target view from the destination render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::Box sourceArea(sourceRect.x, sourceRect.y, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents sourceSize(sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(), 1);
+
+    gl::Box destArea(xoffset, yoffset, 0, sourceRect.width, sourceRect.height, 1);
+    gl::Extents destSize(destRenderTarget->getWidth(), destRenderTarget->getHeight(), 1);
+
+    // Use nearest filtering because source and destination are the same size for the direct
+    // copy
+    bool ret = mBlit->copyTexture(source, sourceArea, sourceSize, dest, destArea, destSize, NULL,
+                                  destFormat, GL_NEAREST);
+
+    storage11->invalidateSwizzleCacheLevel(level);
+
+    return ret;
+}
+
+void Renderer11::unapplyRenderTargets()
+{
+    setOneTimeRenderTarget(NULL);
+}
+
+void Renderer11::setOneTimeRenderTarget(ID3D11RenderTargetView *renderTargetView)
+{
+    ID3D11RenderTargetView *rtvArray[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS] = {NULL};
+
+    rtvArray[0] = renderTargetView;
+
+    mDeviceContext->OMSetRenderTargets(getRendererCaps().maxDrawBuffers, rtvArray, NULL);
+
+    // Do not preserve the serial for this one-time-use render target
+    for (unsigned int rtIndex = 0; rtIndex < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; rtIndex++)
+    {
+        mAppliedRenderTargetSerials[rtIndex] = 0;
+    }
+}
+
+RenderTarget *Renderer11::createRenderTarget(SwapChain *swapChain, bool depth)
+{
+    SwapChain11 *swapChain11 = SwapChain11::makeSwapChain11(swapChain);
+    RenderTarget11 *renderTarget = NULL;
+
+    if (depth)
+    {
+        // Note: depth stencil may be NULL for 0 sized surfaces
+        renderTarget = new RenderTarget11(this, swapChain11->getDepthStencil(),
+                                          swapChain11->getDepthStencilTexture(),
+                                          swapChain11->getDepthStencilShaderResource(),
+                                          swapChain11->getWidth(), swapChain11->getHeight(), 1);
+    }
+    else
+    {
+        // Note: render target may be NULL for 0 sized surfaces
+        renderTarget = new RenderTarget11(this, swapChain11->getRenderTarget(),
+                                          swapChain11->getOffscreenTexture(),
+                                          swapChain11->getRenderTargetShaderResource(),
+                                          swapChain11->getWidth(), swapChain11->getHeight(), 1);
+    }
+    return renderTarget;
+}
+
+RenderTarget *Renderer11::createRenderTarget(int width, int height, GLenum format, GLsizei samples)
+{
+    RenderTarget11 *renderTarget = new RenderTarget11(this, width, height, format, samples);
+    return renderTarget;
+}
+
+ShaderImpl *Renderer11::createShader(GLenum type)
+{
+    return new ShaderD3D(type, this);
+}
+
+ProgramImpl *Renderer11::createProgram()
+{
+    return new ProgramD3D(this);
+}
+
+void Renderer11::releaseShaderCompiler()
+{
+    ShaderD3D::releaseCompiler();
+}
+
+ShaderExecutable *Renderer11::loadExecutable(const void *function, size_t length, rx::ShaderType type,
+                                             const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                             bool separatedOutputBuffers)
+{
+    ShaderExecutable11 *executable = NULL;
+    HRESULT result;
+
+    switch (type)
+    {
+      case rx::SHADER_VERTEX:
+        {
+            ID3D11VertexShader *vertexShader = NULL;
+            ID3D11GeometryShader *streamOutShader = NULL;
+
+            result = mDevice->CreateVertexShader(function, length, NULL, &vertexShader);
+            ASSERT(SUCCEEDED(result));
+
+            if (transformFeedbackVaryings.size() > 0)
+            {
+                std::vector<D3D11_SO_DECLARATION_ENTRY> soDeclaration;
+                for (size_t i = 0; i < transformFeedbackVaryings.size(); i++)
+                {
+                    const gl::LinkedVarying &varying = transformFeedbackVaryings[i];
+                    GLenum transposedType = gl::TransposeMatrixType(varying.type);
+
+                    for (size_t j = 0; j < varying.semanticIndexCount; j++)
+                    {
+                        D3D11_SO_DECLARATION_ENTRY entry = { 0 };
+                        entry.Stream = 0;
+                        entry.SemanticName = varying.semanticName.c_str();
+                        entry.SemanticIndex = varying.semanticIndex + j;
+                        entry.StartComponent = 0;
+                        entry.ComponentCount = gl::VariableColumnCount(transposedType);
+                        entry.OutputSlot = (separatedOutputBuffers ? i : 0);
+                        soDeclaration.push_back(entry);
+                    }
+                }
+
+                result = mDevice->CreateGeometryShaderWithStreamOutput(function, length, soDeclaration.data(), soDeclaration.size(),
+                                                                       NULL, 0, 0, NULL, &streamOutShader);
+                ASSERT(SUCCEEDED(result));
+            }
+
+            if (vertexShader)
+            {
+                executable = new ShaderExecutable11(function, length, vertexShader, streamOutShader);
+            }
+        }
+        break;
+      case rx::SHADER_PIXEL:
+        {
+            ID3D11PixelShader *pixelShader = NULL;
+
+            result = mDevice->CreatePixelShader(function, length, NULL, &pixelShader);
+            ASSERT(SUCCEEDED(result));
+
+            if (pixelShader)
+            {
+                executable = new ShaderExecutable11(function, length, pixelShader);
+            }
+        }
+        break;
+      case rx::SHADER_GEOMETRY:
+        {
+            ID3D11GeometryShader *geometryShader = NULL;
+
+            result = mDevice->CreateGeometryShader(function, length, NULL, &geometryShader);
+            ASSERT(SUCCEEDED(result));
+
+            if (geometryShader)
+            {
+                executable = new ShaderExecutable11(function, length, geometryShader);
+            }
+        }
+        break;
+      default:
+        UNREACHABLE();
+        break;
+    }
+
+    return executable;
+}
+
+ShaderExecutable *Renderer11::compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type,
+                                                  const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                                  bool separatedOutputBuffers, D3DWorkaroundType workaround)
+{
+    const char *profileType = NULL;
+    switch (type)
+    {
+      case rx::SHADER_VERTEX:
+        profileType = "vs";
+        break;
+      case rx::SHADER_PIXEL:
+        profileType = "ps";
+        break;
+      case rx::SHADER_GEOMETRY:
+        profileType = "gs";
+        break;
+      default:
+        UNREACHABLE();
+        return NULL;
+    }
+
+    const char *profileVersion = NULL;
+    switch (mFeatureLevel)
+    {
+      case D3D_FEATURE_LEVEL_11_0:
+        profileVersion = "5_0";
+        break;
+      case D3D_FEATURE_LEVEL_10_1:
+        profileVersion = "4_1";
+        break;
+      case D3D_FEATURE_LEVEL_10_0:
+        profileVersion = "4_0";
+        break;
+      case D3D_FEATURE_LEVEL_9_3:
+        profileVersion = "4_0_level_9_3";
+        break;
+      case D3D_FEATURE_LEVEL_9_2:
+        profileVersion = "4_0_level_9_2";
+        break;
+      case D3D_FEATURE_LEVEL_9_1:
+        profileVersion = "4_0_level_9_1";
+        break;
+      default:
+        UNREACHABLE();
+        return NULL;
+    }
+
+    char profile[32];
+    snprintf(profile, ArraySize(profile), "%s_%s", profileType, profileVersion);
+
+    UINT flags = D3DCOMPILE_OPTIMIZATION_LEVEL0;
+
+    if (gl::perfActive())
+    {
+#ifndef NDEBUG
+        flags = D3DCOMPILE_SKIP_OPTIMIZATION;
+#endif
+
+        flags |= D3DCOMPILE_DEBUG;
+
+        std::string sourcePath = getTempPath();
+        std::string sourceText = std::string("#line 2 \"") + sourcePath + std::string("\"\n\n") + std::string(shaderHLSL);
+        writeFile(sourcePath.c_str(), sourceText.c_str(), sourceText.size());
+    }
+
+    // Sometimes D3DCompile will fail with the default compilation flags for complicated shaders when it would otherwise pass with alternative options.
+    // Try the default flags first and if compilation fails, try some alternatives.
+    const UINT extraFlags[] =
+    {
+        flags,
+        flags | D3DCOMPILE_SKIP_VALIDATION,
+        flags | D3DCOMPILE_SKIP_OPTIMIZATION
+    };
+
+    const static char *extraFlagNames[] =
+    {
+        "default",
+        "skip validation",
+        "skip optimization"
+    };
+
+    int attempts = ArraySize(extraFlags);
+
+    ID3DBlob *binary = (ID3DBlob*)mCompiler.compileToBinary(infoLog, shaderHLSL, profile, extraFlags, extraFlagNames, attempts);
+    if (!binary)
+    {
+        return NULL;
+    }
+
+    ShaderExecutable *executable = loadExecutable((DWORD *)binary->GetBufferPointer(), binary->GetBufferSize(), type,
+                                                  transformFeedbackVaryings, separatedOutputBuffers);
+    SafeRelease(binary);
+
+    return executable;
+}
+
+rx::UniformStorage *Renderer11::createUniformStorage(size_t storageSize)
+{
+    return new UniformStorage11(this, storageSize);
+}
+
+VertexBuffer *Renderer11::createVertexBuffer()
+{
+    return new VertexBuffer11(this);
+}
+
+IndexBuffer *Renderer11::createIndexBuffer()
+{
+    return new IndexBuffer11(this);
+}
+
+BufferImpl *Renderer11::createBuffer()
+{
+    return new Buffer11(this);
+}
+
+VertexArrayImpl *Renderer11::createVertexArray()
+{
+    return new VertexArray11(this);
+}
+
+QueryImpl *Renderer11::createQuery(GLenum type)
+{
+    return new Query11(this, type);
+}
+
+FenceImpl *Renderer11::createFence()
+{
+    return new Fence11(this);
+}
+
+TransformFeedbackImpl* Renderer11::createTransformFeedback()
+{
+    return new TransformFeedbackD3D();
+}
+
+bool Renderer11::supportsFastCopyBufferToTexture(GLenum internalFormat) const
+{
+    ASSERT(getRendererExtensions().pixelBufferObject);
+
+    const gl::InternalFormat &internalFormatInfo = gl::GetInternalFormatInfo(internalFormat);
+    const d3d11::TextureFormat &d3d11FormatInfo = d3d11::GetTextureFormatInfo(internalFormat);
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(d3d11FormatInfo.texFormat);
+
+    // sRGB formats do not work with D3D11 buffer SRVs
+    if (internalFormatInfo.colorEncoding == GL_SRGB)
+    {
+        return false;
+    }
+
+    // We cannot support direct copies to non-color-renderable formats
+    if (d3d11FormatInfo.rtvFormat != DXGI_FORMAT_UNKNOWN)
+    {
+        return false;
+    }
+
+    // We skip all 3-channel formats since sometimes format support is missing
+    if (internalFormatInfo.componentCount == 3)
+    {
+        return false;
+    }
+
+    // We don't support formats which we can't represent without conversion
+    if (dxgiFormatInfo.internalFormat != internalFormat)
+    {
+        return false;
+    }
+
+    return true;
+}
+
+bool Renderer11::fastCopyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                                         GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea)
+{
+    ASSERT(supportsFastCopyBufferToTexture(destinationFormat));
+    return mPixelTransfer->copyBufferToTexture(unpack, offset, destRenderTarget, destinationFormat, sourcePixelsType, destArea);
+}
+
+bool Renderer11::getRenderTargetResource(gl::FramebufferAttachment *colorbuffer, unsigned int *subresourceIndex, ID3D11Texture2D **resource)
+{
+    ASSERT(colorbuffer != NULL);
+
+    RenderTarget11 *renderTarget = d3d11::GetAttachmentRenderTarget(colorbuffer);
+    if (renderTarget)
+    {
+        *subresourceIndex = renderTarget->getSubresourceIndex();
+
+        ID3D11RenderTargetView *colorBufferRTV = renderTarget->getRenderTargetView();
+        if (colorBufferRTV)
+        {
+            ID3D11Resource *textureResource = NULL;
+            colorBufferRTV->GetResource(&textureResource);
+
+            if (textureResource)
+            {
+                HRESULT result = textureResource->QueryInterface(__uuidof(ID3D11Texture2D), (void**)resource);
+                SafeRelease(textureResource);
+
+                if (SUCCEEDED(result))
+                {
+                    return true;
+                }
+                else
+                {
+                    ERR("Failed to extract the ID3D11Texture2D from the render target resource, "
+                        "HRESULT: 0x%X.", result);
+                }
+            }
+        }
+    }
+
+    return false;
+}
+
+bool Renderer11::blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
+                          const gl::Rectangle *scissor, bool blitRenderTarget, bool blitDepth, bool blitStencil, GLenum filter)
+{
+    if (blitRenderTarget)
+    {
+        gl::FramebufferAttachment *readBuffer = readTarget->getReadColorbuffer();
+
+        if (!readBuffer)
+        {
+            ERR("Failed to retrieve the read buffer from the read framebuffer.");
+            return gl::error(GL_OUT_OF_MEMORY, false);
+        }
+
+        RenderTarget *readRenderTarget = GetAttachmentRenderTarget(readBuffer);
+
+        for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
+        {
+            if (drawTarget->isEnabledColorAttachment(colorAttachment))
+            {
+                gl::FramebufferAttachment *drawBuffer = drawTarget->getColorbuffer(colorAttachment);
+
+                if (!drawBuffer)
+                {
+                    ERR("Failed to retrieve the draw buffer from the draw framebuffer.");
+                    return gl::error(GL_OUT_OF_MEMORY, false);
+                }
+
+                RenderTarget *drawRenderTarget = GetAttachmentRenderTarget(drawBuffer);
+
+                if (!blitRenderbufferRect(readRect, drawRect, readRenderTarget, drawRenderTarget, filter, scissor,
+                                          blitRenderTarget, false, false))
+                {
+                    return false;
+                }
+            }
+        }
+    }
+
+    if (blitDepth || blitStencil)
+    {
+        gl::FramebufferAttachment *readBuffer = readTarget->getDepthOrStencilbuffer();
+        gl::FramebufferAttachment *drawBuffer = drawTarget->getDepthOrStencilbuffer();
+
+        if (!readBuffer)
+        {
+            ERR("Failed to retrieve the read depth-stencil buffer from the read framebuffer.");
+            return gl::error(GL_OUT_OF_MEMORY, false);
+        }
+
+        if (!drawBuffer)
+        {
+            ERR("Failed to retrieve the draw depth-stencil buffer from the draw framebuffer.");
+            return gl::error(GL_OUT_OF_MEMORY, false);
+        }
+
+        RenderTarget *readRenderTarget = GetAttachmentRenderTarget(readBuffer);
+        RenderTarget *drawRenderTarget = GetAttachmentRenderTarget(drawBuffer);
+        ASSERT(readRenderTarget && drawRenderTarget);
+
+        if (!blitRenderbufferRect(readRect, drawRect, readRenderTarget, drawRenderTarget, filter, scissor,
+                                  false, blitDepth, blitStencil))
+        {
+            return false;
+        }
+    }
+
+    invalidateFramebufferSwizzles(drawTarget);
+
+    return true;
+}
+
+gl::Error Renderer11::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format,
+                                 GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels)
+{
+    ID3D11Texture2D *colorBufferTexture = NULL;
+    unsigned int subresourceIndex = 0;
+
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getReadColorbuffer();
+
+    if (colorbuffer && getRenderTargetResource(colorbuffer, &subresourceIndex, &colorBufferTexture))
+    {
+        gl::Rectangle area;
+        area.x = x;
+        area.y = y;
+        area.width = width;
+        area.height = height;
+
+        gl::Buffer *packBuffer = pack.pixelBuffer.get();
+        if (packBuffer != NULL)
+        {
+            rx::Buffer11 *packBufferStorage = Buffer11::makeBuffer11(packBuffer->getImplementation());
+            PackPixelsParams packParams(area, format, type, outputPitch, pack, reinterpret_cast<ptrdiff_t>(pixels));
+
+            gl::Error error = packBufferStorage->packPixels(colorBufferTexture, subresourceIndex, packParams);
+            if (error.isError())
+            {
+                return error;
+            }
+
+            packBuffer->getIndexRangeCache()->clear();
+        }
+        else
+        {
+            gl::Error error = readTextureData(colorBufferTexture, subresourceIndex, area, format, type, outputPitch, pack, pixels);
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+
+        SafeRelease(colorBufferTexture);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+Image *Renderer11::createImage()
+{
+    return new Image11();
+}
+
+void Renderer11::generateMipmap(Image *dest, Image *src)
+{
+    Image11 *dest11 = Image11::makeImage11(dest);
+    Image11 *src11 = Image11::makeImage11(src);
+    Image11::generateMipmap(dest11, src11);
+}
+
+TextureStorage *Renderer11::createTextureStorage2D(SwapChain *swapChain)
+{
+    SwapChain11 *swapChain11 = SwapChain11::makeSwapChain11(swapChain);
+    return new TextureStorage11_2D(this, swapChain11);
+}
+
+TextureStorage *Renderer11::createTextureStorage2D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels)
+{
+    return new TextureStorage11_2D(this, internalformat, renderTarget, width, height, levels);
+}
+
+TextureStorage *Renderer11::createTextureStorageCube(GLenum internalformat, bool renderTarget, int size, int levels)
+{
+    return new TextureStorage11_Cube(this, internalformat, renderTarget, size, levels);
+}
+
+TextureStorage *Renderer11::createTextureStorage3D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels)
+{
+    return new TextureStorage11_3D(this, internalformat, renderTarget, width, height, depth, levels);
+}
+
+TextureStorage *Renderer11::createTextureStorage2DArray(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels)
+{
+    return new TextureStorage11_2DArray(this, internalformat, renderTarget, width, height, depth, levels);
+}
+
+TextureImpl *Renderer11::createTexture(GLenum target)
+{
+    switch(target)
+    {
+      case GL_TEXTURE_2D: return new TextureD3D_2D(this);
+      case GL_TEXTURE_CUBE_MAP: return new TextureD3D_Cube(this);
+      case GL_TEXTURE_3D: return new TextureD3D_3D(this);
+      case GL_TEXTURE_2D_ARRAY: return new TextureD3D_2DArray(this);
+      default:
+        UNREACHABLE();
+    }
+
+    return NULL;
+}
+
+gl::Error Renderer11::readTextureData(ID3D11Texture2D *texture, unsigned int subResource, const gl::Rectangle &area, GLenum format,
+                                      GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels)
+{
+    ASSERT(area.width >= 0);
+    ASSERT(area.height >= 0);
+
+    D3D11_TEXTURE2D_DESC textureDesc;
+    texture->GetDesc(&textureDesc);
+
+    // Clamp read region to the defined texture boundaries, preventing out of bounds reads
+    // and reads of uninitialized data.
+    gl::Rectangle safeArea;
+    safeArea.x      = gl::clamp(area.x, 0, static_cast<int>(textureDesc.Width));
+    safeArea.y      = gl::clamp(area.y, 0, static_cast<int>(textureDesc.Height));
+    safeArea.width  = gl::clamp(area.width + std::min(area.x, 0), 0,
+                                static_cast<int>(textureDesc.Width) - safeArea.x);
+    safeArea.height = gl::clamp(area.height + std::min(area.y, 0), 0,
+                                static_cast<int>(textureDesc.Height) - safeArea.y);
+
+    ASSERT(safeArea.x >= 0 && safeArea.y >= 0);
+    ASSERT(safeArea.x + safeArea.width  <= static_cast<int>(textureDesc.Width));
+    ASSERT(safeArea.y + safeArea.height <= static_cast<int>(textureDesc.Height));
+
+    if (safeArea.width == 0 || safeArea.height == 0)
+    {
+        // no work to do
+        return gl::Error(GL_NO_ERROR);
+    }
+
+    D3D11_TEXTURE2D_DESC stagingDesc;
+    stagingDesc.Width = safeArea.width;
+    stagingDesc.Height = safeArea.height;
+    stagingDesc.MipLevels = 1;
+    stagingDesc.ArraySize = 1;
+    stagingDesc.Format = textureDesc.Format;
+    stagingDesc.SampleDesc.Count = 1;
+    stagingDesc.SampleDesc.Quality = 0;
+    stagingDesc.Usage = D3D11_USAGE_STAGING;
+    stagingDesc.BindFlags = 0;
+    stagingDesc.CPUAccessFlags = D3D11_CPU_ACCESS_READ;
+    stagingDesc.MiscFlags = 0;
+
+    ID3D11Texture2D* stagingTex = NULL;
+    HRESULT result = mDevice->CreateTexture2D(&stagingDesc, NULL, &stagingTex);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to create internal staging texture for ReadPixels, HRESULT: 0x%X.", result);
+    }
+
+    ID3D11Texture2D* srcTex = NULL;
+    if (textureDesc.SampleDesc.Count > 1)
+    {
+        D3D11_TEXTURE2D_DESC resolveDesc;
+        resolveDesc.Width = textureDesc.Width;
+        resolveDesc.Height = textureDesc.Height;
+        resolveDesc.MipLevels = 1;
+        resolveDesc.ArraySize = 1;
+        resolveDesc.Format = textureDesc.Format;
+        resolveDesc.SampleDesc.Count = 1;
+        resolveDesc.SampleDesc.Quality = 0;
+        resolveDesc.Usage = D3D11_USAGE_DEFAULT;
+        resolveDesc.BindFlags = 0;
+        resolveDesc.CPUAccessFlags = 0;
+        resolveDesc.MiscFlags = 0;
+
+        result = mDevice->CreateTexture2D(&resolveDesc, NULL, &srcTex);
+        if (FAILED(result))
+        {
+            SafeRelease(stagingTex);
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to create internal resolve texture for ReadPixels, HRESULT: 0x%X.", result);
+        }
+
+        mDeviceContext->ResolveSubresource(srcTex, 0, texture, subResource, textureDesc.Format);
+        subResource = 0;
+    }
+    else
+    {
+        srcTex = texture;
+        srcTex->AddRef();
+    }
+
+    D3D11_BOX srcBox;
+    srcBox.left   = static_cast<UINT>(safeArea.x);
+    srcBox.right  = static_cast<UINT>(safeArea.x + safeArea.width);
+    srcBox.top    = static_cast<UINT>(safeArea.y);
+    srcBox.bottom = static_cast<UINT>(safeArea.y + safeArea.height);
+    srcBox.front  = 0;
+    srcBox.back   = 1;
+
+    mDeviceContext->CopySubresourceRegion(stagingTex, 0, 0, 0, 0, srcTex, subResource, &srcBox);
+
+    SafeRelease(srcTex);
+
+    PackPixelsParams packParams(safeArea, format, type, outputPitch, pack, 0);
+    packPixels(stagingTex, packParams, pixels);
+
+    SafeRelease(stagingTex);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Renderer11::packPixels(ID3D11Texture2D *readTexture, const PackPixelsParams &params, uint8_t *pixelsOut)
+{
+    D3D11_TEXTURE2D_DESC textureDesc;
+    readTexture->GetDesc(&textureDesc);
+
+    D3D11_MAPPED_SUBRESOURCE mapping;
+    HRESULT hr = mDeviceContext->Map(readTexture, 0, D3D11_MAP_READ, 0, &mapping);
+    UNUSED_ASSERTION_VARIABLE(hr);
+    ASSERT(SUCCEEDED(hr));
+
+    uint8_t *source;
+    int inputPitch;
+    if (params.pack.reverseRowOrder)
+    {
+        source = static_cast<uint8_t*>(mapping.pData) + mapping.RowPitch * (params.area.height - 1);
+        inputPitch = -static_cast<int>(mapping.RowPitch);
+    }
+    else
+    {
+        source = static_cast<uint8_t*>(mapping.pData);
+        inputPitch = static_cast<int>(mapping.RowPitch);
+    }
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(textureDesc.Format);
+    const gl::InternalFormat &sourceFormatInfo = gl::GetInternalFormatInfo(dxgiFormatInfo.internalFormat);
+    if (sourceFormatInfo.format == params.format && sourceFormatInfo.type == params.type)
+    {
+        uint8_t *dest = pixelsOut + params.offset;
+        for (int y = 0; y < params.area.height; y++)
+        {
+            memcpy(dest + y * params.outputPitch, source + y * inputPitch, params.area.width * sourceFormatInfo.pixelBytes);
+        }
+    }
+    else
+    {
+        const d3d11::DXGIFormat &sourceDXGIFormatInfo = d3d11::GetDXGIFormatInfo(textureDesc.Format);
+        ColorCopyFunction fastCopyFunc = sourceDXGIFormatInfo.getFastCopyFunction(params.format, params.type);
+
+        const gl::FormatType &destFormatTypeInfo = gl::GetFormatTypeInfo(params.format, params.type);
+        const gl::InternalFormat &destFormatInfo = gl::GetInternalFormatInfo(destFormatTypeInfo.internalFormat);
+
+        if (fastCopyFunc)
+        {
+            // Fast copy is possible through some special function
+            for (int y = 0; y < params.area.height; y++)
+            {
+                for (int x = 0; x < params.area.width; x++)
+                {
+                    uint8_t *dest = pixelsOut + params.offset + y * params.outputPitch + x * destFormatInfo.pixelBytes;
+                    const uint8_t *src = source + y * inputPitch + x * sourceFormatInfo.pixelBytes;
+
+                    fastCopyFunc(src, dest);
+                }
+            }
+        }
+        else
+        {
+            uint8_t temp[16]; // Maximum size of any Color<T> type used.
+            META_ASSERT(sizeof(temp) >= sizeof(gl::ColorF)  &&
+                        sizeof(temp) >= sizeof(gl::ColorUI) &&
+                        sizeof(temp) >= sizeof(gl::ColorI));
+
+            for (int y = 0; y < params.area.height; y++)
+            {
+                for (int x = 0; x < params.area.width; x++)
+                {
+                    uint8_t *dest = pixelsOut + params.offset + y * params.outputPitch + x * destFormatInfo.pixelBytes;
+                    const uint8_t *src = source + y * inputPitch + x * sourceFormatInfo.pixelBytes;
+
+                    // readFunc and writeFunc will be using the same type of color, CopyTexImage
+                    // will not allow the copy otherwise.
+                    sourceDXGIFormatInfo.colorReadFunction(src, temp);
+                    destFormatTypeInfo.colorWriteFunction(temp, dest);
+                }
+            }
+        }
+    }
+
+    mDeviceContext->Unmap(readTexture, 0);
+}
+
+bool Renderer11::blitRenderbufferRect(const gl::Rectangle &readRect, const gl::Rectangle &drawRect, RenderTarget *readRenderTarget,
+                                      RenderTarget *drawRenderTarget, GLenum filter, const gl::Rectangle *scissor,
+                                      bool colorBlit, bool depthBlit, bool stencilBlit)
+{
+    // Since blitRenderbufferRect is called for each render buffer that needs to be blitted,
+    // it should never be the case that both color and depth/stencil need to be blitted at
+    // at the same time.
+    ASSERT(colorBlit != (depthBlit || stencilBlit));
+
+    bool result = true;
+
+    RenderTarget11 *drawRenderTarget11 = RenderTarget11::makeRenderTarget11(drawRenderTarget);
+    if (!drawRenderTarget)
+    {
+        ERR("Failed to retrieve the draw render target from the draw framebuffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11Resource *drawTexture = drawRenderTarget11->getTexture();
+    unsigned int drawSubresource = drawRenderTarget11->getSubresourceIndex();
+    ID3D11RenderTargetView *drawRTV = drawRenderTarget11->getRenderTargetView();
+    ID3D11DepthStencilView *drawDSV = drawRenderTarget11->getDepthStencilView();
+
+    RenderTarget11 *readRenderTarget11 = RenderTarget11::makeRenderTarget11(readRenderTarget);
+    if (!readRenderTarget)
+    {
+        ERR("Failed to retrieve the read render target from the read framebuffer.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    ID3D11Resource *readTexture = NULL;
+    ID3D11ShaderResourceView *readSRV = NULL;
+    unsigned int readSubresource = 0;
+    if (readRenderTarget->getSamples() > 0)
+    {
+        ID3D11Resource *unresolvedResource = readRenderTarget11->getTexture();
+        ID3D11Texture2D *unresolvedTexture = d3d11::DynamicCastComObject<ID3D11Texture2D>(unresolvedResource);
+
+        if (unresolvedTexture)
+        {
+            readTexture = resolveMultisampledTexture(unresolvedTexture, readRenderTarget11->getSubresourceIndex());
+            readSubresource = 0;
+
+            SafeRelease(unresolvedTexture);
+
+            HRESULT hresult = mDevice->CreateShaderResourceView(readTexture, NULL, &readSRV);
+            if (FAILED(hresult))
+            {
+                SafeRelease(readTexture);
+                return gl::error(GL_OUT_OF_MEMORY, false);
+            }
+        }
+    }
+    else
+    {
+        readTexture = readRenderTarget11->getTexture();
+        readTexture->AddRef();
+        readSubresource = readRenderTarget11->getSubresourceIndex();
+        readSRV = readRenderTarget11->getShaderResourceView();
+        readSRV->AddRef();
+    }
+
+    if (!readTexture || !readSRV)
+    {
+        SafeRelease(readTexture);
+        SafeRelease(readSRV);
+        ERR("Failed to retrieve the read render target view from the read render target.");
+        return gl::error(GL_OUT_OF_MEMORY, false);
+    }
+
+    gl::Extents readSize(readRenderTarget->getWidth(), readRenderTarget->getHeight(), 1);
+    gl::Extents drawSize(drawRenderTarget->getWidth(), drawRenderTarget->getHeight(), 1);
+
+    bool scissorNeeded = scissor && gl::ClipRectangle(drawRect, *scissor, NULL);
+
+    bool wholeBufferCopy = !scissorNeeded &&
+                           readRect.x == 0 && readRect.width == readSize.width &&
+                           readRect.y == 0 && readRect.height == readSize.height &&
+                           drawRect.x == 0 && drawRect.width == drawSize.width &&
+                           drawRect.y == 0 && drawRect.height == drawSize.height;
+
+    bool stretchRequired = readRect.width != drawRect.width || readRect.height != drawRect.height;
+
+    bool flipRequired = readRect.width < 0 || readRect.height < 0 || drawRect.width < 0 || drawRect.height < 0;
+
+    bool outOfBounds = readRect.x < 0 || readRect.x + readRect.width > readSize.width ||
+                       readRect.y < 0 || readRect.y + readRect.height > readSize.height ||
+                       drawRect.x < 0 || drawRect.x + drawRect.width > drawSize.width ||
+                       drawRect.y < 0 || drawRect.y + drawRect.height > drawSize.height;
+
+    const gl::InternalFormat &actualFormatInfo = gl::GetInternalFormatInfo(drawRenderTarget->getActualFormat());
+    bool partialDSBlit = (actualFormatInfo.depthBits > 0 && depthBlit) != (actualFormatInfo.stencilBits > 0 && stencilBlit);
+
+    if (readRenderTarget11->getActualFormat() == drawRenderTarget->getActualFormat() &&
+        !stretchRequired && !outOfBounds && !flipRequired && !partialDSBlit &&
+        (!(depthBlit || stencilBlit) || wholeBufferCopy))
+    {
+        UINT dstX = drawRect.x;
+        UINT dstY = drawRect.y;
+
+        D3D11_BOX readBox;
+        readBox.left = readRect.x;
+        readBox.right = readRect.x + readRect.width;
+        readBox.top = readRect.y;
+        readBox.bottom = readRect.y + readRect.height;
+        readBox.front = 0;
+        readBox.back = 1;
+
+        if (scissorNeeded)
+        {
+            // drawRect is guaranteed to have positive width and height because stretchRequired is false.
+            ASSERT(drawRect.width >= 0 || drawRect.height >= 0);
+
+            if (drawRect.x < scissor->x)
+            {
+                dstX = scissor->x;
+                readBox.left += (scissor->x - drawRect.x);
+            }
+            if (drawRect.y < scissor->y)
+            {
+                dstY = scissor->y;
+                readBox.top += (scissor->y - drawRect.y);
+            }
+            if (drawRect.x + drawRect.width > scissor->x + scissor->width)
+            {
+                readBox.right -= ((drawRect.x + drawRect.width) - (scissor->x + scissor->width));
+            }
+            if (drawRect.y + drawRect.height > scissor->y + scissor->height)
+            {
+                readBox.bottom -= ((drawRect.y + drawRect.height) - (scissor->y + scissor->height));
+            }
+        }
+
+        // D3D11 needs depth-stencil CopySubresourceRegions to have a NULL pSrcBox
+        // We also require complete framebuffer copies for depth-stencil blit.
+        D3D11_BOX *pSrcBox = wholeBufferCopy ? NULL : &readBox;
+
+        mDeviceContext->CopySubresourceRegion(drawTexture, drawSubresource, dstX, dstY, 0,
+                                              readTexture, readSubresource, pSrcBox);
+        result = true;
+    }
+    else
+    {
+        gl::Box readArea(readRect.x, readRect.y, 0, readRect.width, readRect.height, 1);
+        gl::Box drawArea(drawRect.x, drawRect.y, 0, drawRect.width, drawRect.height, 1);
+
+        if (depthBlit && stencilBlit)
+        {
+            result = mBlit->copyDepthStencil(readTexture, readSubresource, readArea, readSize,
+                                             drawTexture, drawSubresource, drawArea, drawSize,
+                                             scissor);
+        }
+        else if (depthBlit)
+        {
+            result = mBlit->copyDepth(readSRV, readArea, readSize, drawDSV, drawArea, drawSize,
+                                      scissor);
+        }
+        else if (stencilBlit)
+        {
+            result = mBlit->copyStencil(readTexture, readSubresource, readArea, readSize,
+                                        drawTexture, drawSubresource, drawArea, drawSize,
+                                        scissor);
+        }
+        else
+        {
+            GLenum format = gl::GetInternalFormatInfo(drawRenderTarget->getInternalFormat()).format;
+            result = mBlit->copyTexture(readSRV, readArea, readSize, drawRTV, drawArea, drawSize,
+                                        scissor, format, filter);
+        }
+    }
+
+    SafeRelease(readTexture);
+    SafeRelease(readSRV);
+
+    return result;
+}
+
+ID3D11Texture2D *Renderer11::resolveMultisampledTexture(ID3D11Texture2D *source, unsigned int subresource)
+{
+    D3D11_TEXTURE2D_DESC textureDesc;
+    source->GetDesc(&textureDesc);
+
+    if (textureDesc.SampleDesc.Count > 1)
+    {
+        D3D11_TEXTURE2D_DESC resolveDesc;
+        resolveDesc.Width = textureDesc.Width;
+        resolveDesc.Height = textureDesc.Height;
+        resolveDesc.MipLevels = 1;
+        resolveDesc.ArraySize = 1;
+        resolveDesc.Format = textureDesc.Format;
+        resolveDesc.SampleDesc.Count = 1;
+        resolveDesc.SampleDesc.Quality = 0;
+        resolveDesc.Usage = textureDesc.Usage;
+        resolveDesc.BindFlags = textureDesc.BindFlags;
+        resolveDesc.CPUAccessFlags = 0;
+        resolveDesc.MiscFlags = 0;
+
+        ID3D11Texture2D *resolveTexture = NULL;
+        HRESULT result = mDevice->CreateTexture2D(&resolveDesc, NULL, &resolveTexture);
+        if (FAILED(result))
+        {
+            ERR("Failed to create a multisample resolve texture, HRESULT: 0x%X.", result);
+            return NULL;
+        }
+
+        mDeviceContext->ResolveSubresource(resolveTexture, 0, source, subresource, textureDesc.Format);
+        return resolveTexture;
+    }
+    else
+    {
+        source->AddRef();
+        return source;
+    }
+}
+
+void Renderer11::invalidateFBOAttachmentSwizzles(gl::FramebufferAttachment *attachment, int mipLevel)
+{
+    ASSERT(attachment->isTexture());
+    gl::Texture *texture = attachment->getTexture();
+
+    TextureStorage *texStorage = texture->getNativeTexture();
+    if (texStorage)
+    {
+        TextureStorage11 *texStorage11 = TextureStorage11::makeTextureStorage11(texStorage);
+        if (!texStorage11)
+        {
+            ERR("texture storage pointer unexpectedly null.");
+            return;
+        }
+
+        texStorage11->invalidateSwizzleCacheLevel(mipLevel);
+    }
+}
+
+void Renderer11::invalidateFramebufferSwizzles(gl::Framebuffer *framebuffer)
+{
+    for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
+    {
+        gl::FramebufferAttachment *attachment = framebuffer->getColorbuffer(colorAttachment);
+        if (attachment && attachment->isTexture())
+        {
+            invalidateFBOAttachmentSwizzles(attachment, attachment->mipLevel());
+        }
+    }
+
+    gl::FramebufferAttachment *depthAttachment = framebuffer->getDepthbuffer();
+    if (depthAttachment && depthAttachment->isTexture())
+    {
+        invalidateFBOAttachmentSwizzles(depthAttachment, depthAttachment->mipLevel());
+    }
+
+    gl::FramebufferAttachment *stencilAttachment = framebuffer->getStencilbuffer();
+    if (stencilAttachment && stencilAttachment->isTexture())
+    {
+        invalidateFBOAttachmentSwizzles(stencilAttachment, stencilAttachment->mipLevel());
+    }
+}
+
+bool Renderer11::getLUID(LUID *adapterLuid) const
+{
+    adapterLuid->HighPart = 0;
+    adapterLuid->LowPart = 0;
+
+    if (!mDxgiAdapter)
+    {
+        return false;
+    }
+
+    DXGI_ADAPTER_DESC adapterDesc;
+    if (FAILED(mDxgiAdapter->GetDesc(&adapterDesc)))
+    {
+        return false;
+    }
+
+    *adapterLuid = adapterDesc.AdapterLuid;
+    return true;
+}
+
+rx::VertexConversionType Renderer11::getVertexConversionType(const gl::VertexFormat &vertexFormat) const
+{
+    return d3d11::GetVertexFormatInfo(vertexFormat).conversionType;
+}
+
+GLenum Renderer11::getVertexComponentType(const gl::VertexFormat &vertexFormat) const
+{
+    return d3d11::GetDXGIFormatInfo(d3d11::GetVertexFormatInfo(vertexFormat).nativeFormat).componentType;
+}
+
+void Renderer11::generateCaps(gl::Caps *outCaps, gl::TextureCapsMap *outTextureCaps, gl::Extensions *outExtensions) const
+{
+    d3d11_gl::GenerateCaps(mDevice, outCaps, outTextureCaps, outExtensions);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
new file mode 100644
index 0000000000..2a53fa1672
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
@@ -0,0 +1,346 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Renderer11.h: Defines a back-end specific class for the D3D11 renderer.
+
+#ifndef LIBGLESV2_RENDERER_RENDERER11_H_
+#define LIBGLESV2_RENDERER_RENDERER11_H_
+
+#include "common/angleutils.h"
+#include "libGLESv2/angletypes.h"
+#include "common/mathutil.h"
+
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/d3d/HLSLCompiler.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderStateCache.h"
+#include "libGLESv2/renderer/d3d/d3d11/InputLayoutCache.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+
+namespace gl
+{
+class FramebufferAttachment;
+}
+
+namespace rx
+{
+
+class VertexDataManager;
+class IndexDataManager;
+class StreamingIndexBufferInterface;
+class Blit11;
+class Clear11;
+class PixelTransfer11;
+struct PackPixelsParams;
+
+enum
+{
+    MAX_VERTEX_UNIFORM_VECTORS_D3D11 = 1024,
+    MAX_FRAGMENT_UNIFORM_VECTORS_D3D11 = 1024
+};
+
+class Renderer11 : public Renderer
+{
+  public:
+    Renderer11(egl::Display *display, EGLNativeDisplayType hDc, EGLint requestedDisplay);
+    virtual ~Renderer11();
+
+    static Renderer11 *makeRenderer11(Renderer *renderer);
+
+    virtual EGLint initialize();
+    virtual bool resetDevice();
+
+    virtual int generateConfigs(ConfigDesc **configDescList);
+    virtual void deleteConfigs(ConfigDesc *configDescList);
+
+    virtual void sync(bool block);
+
+    virtual SwapChain *createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat);
+
+    virtual gl::Error generateSwizzle(gl::Texture *texture);
+    virtual gl::Error setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler);
+    virtual gl::Error setTexture(gl::SamplerType type, int index, gl::Texture *texture);
+
+    virtual gl::Error setUniformBuffers(const gl::Buffer *vertexUniformBuffers[], const gl::Buffer *fragmentUniformBuffers[]);
+
+    virtual gl::Error setRasterizerState(const gl::RasterizerState &rasterState);
+    virtual gl::Error setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::ColorF &blendColor,
+                                    unsigned int sampleMask);
+    virtual gl::Error setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
+                                           int stencilBackRef, bool frontFaceCCW);
+
+    virtual void setScissorRectangle(const gl::Rectangle &scissor, bool enabled);
+    virtual void setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
+                             bool ignoreViewport);
+
+    virtual bool applyPrimitiveType(GLenum mode, GLsizei count);
+    virtual gl::Error applyRenderTarget(gl::Framebuffer *frameBuffer);
+    virtual gl::Error applyShaders(gl::ProgramBinary *programBinary, const gl::VertexFormat inputLayout[], const gl::Framebuffer *framebuffer,
+                                   bool rasterizerDiscard, bool transformFeedbackActive);
+    virtual gl::Error applyUniforms(const gl::ProgramBinary &programBinary);
+    virtual gl::Error applyVertexBuffer(gl::ProgramBinary *programBinary, const gl::VertexAttribute vertexAttributes[], const gl::VertexAttribCurrentValueData currentValues[],
+                                        GLint first, GLsizei count, GLsizei instances);
+    virtual gl::Error applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo);
+    virtual void applyTransformFeedbackBuffers(gl::Buffer *transformFeedbackBuffers[], GLintptr offsets[]);
+
+    virtual gl::Error drawArrays(GLenum mode, GLsizei count, GLsizei instances, bool transformFeedbackActive);
+    virtual gl::Error drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices,
+                                   gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances);
+
+    virtual gl::Error clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer);
+
+    virtual void markAllStateDirty();
+
+    // lost device
+    void notifyDeviceLost();
+    virtual bool isDeviceLost();
+    virtual bool testDeviceLost(bool notify);
+    virtual bool testDeviceResettable();
+
+    virtual DWORD getAdapterVendor() const;
+    virtual std::string getRendererDescription() const;
+    virtual GUID getAdapterIdentifier() const;
+
+    virtual unsigned int getReservedVertexUniformVectors() const;
+    virtual unsigned int getReservedFragmentUniformVectors() const;
+    virtual unsigned int getReservedVertexUniformBuffers() const;
+    virtual unsigned int getReservedFragmentUniformBuffers() const;
+    virtual bool getShareHandleSupport() const;
+    virtual bool getPostSubBufferSupport() const;
+
+    virtual int getMajorShaderModel() const;
+    virtual int getMinSwapInterval() const;
+    virtual int getMaxSwapInterval() const;
+
+    // Pixel operations
+    virtual bool copyToRenderTarget2D(TextureStorage *dest, TextureStorage *source);
+    virtual bool copyToRenderTargetCube(TextureStorage *dest, TextureStorage *source);
+    virtual bool copyToRenderTarget3D(TextureStorage *dest, TextureStorage *source);
+    virtual bool copyToRenderTarget2DArray(TextureStorage *dest, TextureStorage *source);
+
+    virtual bool copyImage2D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level);
+    virtual bool copyImageCube(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                               GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level);
+    virtual bool copyImage3D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level);
+    virtual bool copyImage2DArray(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                                  GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level);
+
+    virtual bool blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
+                          const gl::Rectangle *scissor, bool blitRenderTarget, bool blitDepth, bool blitStencil, GLenum filter);
+
+    virtual gl::Error readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format,
+                                 GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels);
+
+    // RenderTarget creation
+    virtual RenderTarget *createRenderTarget(SwapChain *swapChain, bool depth);
+    virtual RenderTarget *createRenderTarget(int width, int height, GLenum format, GLsizei samples);
+
+    // Shader creation
+    virtual ShaderImpl *createShader(GLenum type);
+    virtual ProgramImpl *createProgram();
+
+    // Shader operations
+    virtual void releaseShaderCompiler();
+    virtual ShaderExecutable *loadExecutable(const void *function, size_t length, rx::ShaderType type,
+                                             const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                             bool separatedOutputBuffers);
+    virtual ShaderExecutable *compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type,
+                                                  const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                                  bool separatedOutputBuffers, D3DWorkaroundType workaround);
+    virtual UniformStorage *createUniformStorage(size_t storageSize);
+
+    // Image operations
+    virtual Image *createImage();
+    virtual void generateMipmap(Image *dest, Image *source);
+    virtual TextureStorage *createTextureStorage2D(SwapChain *swapChain);
+    virtual TextureStorage *createTextureStorage2D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels);
+    virtual TextureStorage *createTextureStorageCube(GLenum internalformat, bool renderTarget, int size, int levels);
+    virtual TextureStorage *createTextureStorage3D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels);
+    virtual TextureStorage *createTextureStorage2DArray(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels);
+
+    // Texture creation
+    virtual TextureImpl *createTexture(GLenum target);
+
+    // Buffer creation
+    virtual BufferImpl *createBuffer();
+    virtual VertexBuffer *createVertexBuffer();
+    virtual IndexBuffer *createIndexBuffer();
+
+    // Vertex Array creation
+    virtual VertexArrayImpl *createVertexArray();
+
+    // Query and Fence creation
+    virtual QueryImpl *createQuery(GLenum type);
+    virtual FenceImpl *createFence();
+
+    // Transform Feedback creation
+    virtual TransformFeedbackImpl* createTransformFeedback();
+
+    // D3D11-renderer specific methods
+    ID3D11Device *getDevice() { return mDevice; }
+    ID3D11DeviceContext *getDeviceContext() { return mDeviceContext; };
+    IDXGIFactory *getDxgiFactory() { return mDxgiFactory; };
+    bool isLevel9() { return mFeatureLevel <= D3D_FEATURE_LEVEL_9_3; }
+
+    Blit11 *getBlitter() { return mBlit; }
+
+    // Buffer-to-texture and Texture-to-buffer copies
+    virtual bool supportsFastCopyBufferToTexture(GLenum internalFormat) const;
+    virtual bool fastCopyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                                         GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea);
+
+    bool getRenderTargetResource(gl::FramebufferAttachment *colorbuffer, unsigned int *subresourceIndex, ID3D11Texture2D **resource);
+    void unapplyRenderTargets();
+    void setOneTimeRenderTarget(ID3D11RenderTargetView *renderTargetView);
+    void packPixels(ID3D11Texture2D *readTexture, const PackPixelsParams &params, uint8_t *pixelsOut);
+
+    virtual bool getLUID(LUID *adapterLuid) const;
+    virtual rx::VertexConversionType getVertexConversionType(const gl::VertexFormat &vertexFormat) const;
+    virtual GLenum getVertexComponentType(const gl::VertexFormat &vertexFormat) const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Renderer11);
+
+    virtual void generateCaps(gl::Caps *outCaps, gl::TextureCapsMap *outTextureCaps, gl::Extensions *outExtensions) const;
+
+    gl::Error drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer);
+    gl::Error drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer, int instances);
+
+    gl::Error readTextureData(ID3D11Texture2D *texture, unsigned int subResource, const gl::Rectangle &area, GLenum format,
+                              GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels);
+
+    bool blitRenderbufferRect(const gl::Rectangle &readRect, const gl::Rectangle &drawRect, RenderTarget *readRenderTarget,
+                              RenderTarget *drawRenderTarget, GLenum filter, const gl::Rectangle *scissor,
+                              bool colorBlit, bool depthBlit, bool stencilBlit);
+    ID3D11Texture2D *resolveMultisampledTexture(ID3D11Texture2D *source, unsigned int subresource);
+
+    static void invalidateFBOAttachmentSwizzles(gl::FramebufferAttachment *attachment, int mipLevel);
+    static void invalidateFramebufferSwizzles(gl::Framebuffer *framebuffer);
+
+    HMODULE mD3d11Module;
+    HMODULE mDxgiModule;
+    EGLNativeDisplayType mDc;
+    EGLint mRequestedDisplay;
+
+    HLSLCompiler mCompiler;
+
+    bool mDeviceLost;
+
+    void initializeDevice();
+    void releaseDeviceResources();
+    int getMinorShaderModel() const;
+    void release();
+
+    RenderStateCache mStateCache;
+
+    // current render target states
+    unsigned int mAppliedRenderTargetSerials[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS];
+    unsigned int mAppliedDepthbufferSerial;
+    unsigned int mAppliedStencilbufferSerial;
+    bool mDepthStencilInitialized;
+    bool mRenderTargetDescInitialized;
+    rx::RenderTarget::Desc mRenderTargetDesc;
+
+    // Currently applied sampler states
+    std::vector<bool> mForceSetVertexSamplerStates;
+    std::vector<gl::SamplerState> mCurVertexSamplerStates;
+
+    std::vector<bool> mForceSetPixelSamplerStates;
+    std::vector<gl::SamplerState> mCurPixelSamplerStates;
+
+    // Currently applied textures
+    std::vector<ID3D11ShaderResourceView*> mCurVertexSRVs;
+    std::vector<ID3D11ShaderResourceView*> mCurPixelSRVs;
+
+    // Currently applied blend state
+    bool mForceSetBlendState;
+    gl::BlendState mCurBlendState;
+    gl::ColorF mCurBlendColor;
+    unsigned int mCurSampleMask;
+
+    // Currently applied rasterizer state
+    bool mForceSetRasterState;
+    gl::RasterizerState mCurRasterState;
+
+    // Currently applied depth stencil state
+    bool mForceSetDepthStencilState;
+    gl::DepthStencilState mCurDepthStencilState;
+    int mCurStencilRef;
+    int mCurStencilBackRef;
+
+    // Currently applied scissor rectangle
+    bool mForceSetScissor;
+    bool mScissorEnabled;
+    gl::Rectangle mCurScissor;
+
+    // Currently applied viewport
+    bool mForceSetViewport;
+    gl::Rectangle mCurViewport;
+    float mCurNear;
+    float mCurFar;
+
+    // Currently applied primitive topology
+    D3D11_PRIMITIVE_TOPOLOGY mCurrentPrimitiveTopology;
+
+    // Currently applied index buffer
+    ID3D11Buffer *mAppliedIB;
+    DXGI_FORMAT mAppliedIBFormat;
+    unsigned int mAppliedIBOffset;
+
+    // Currently applied transform feedback buffers
+    ID3D11Buffer *mAppliedTFBuffers[gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+    GLintptr mAppliedTFOffsets[gl::IMPLEMENTATION_MAX_TRANSFORM_FEEDBACK_BUFFERS];
+
+    // Currently applied shaders
+    ID3D11VertexShader *mAppliedVertexShader;
+    ID3D11GeometryShader *mAppliedGeometryShader;
+    ID3D11GeometryShader *mCurPointGeometryShader;
+    ID3D11PixelShader *mAppliedPixelShader;
+
+    dx_VertexConstants mVertexConstants;
+    dx_VertexConstants mAppliedVertexConstants;
+    ID3D11Buffer *mDriverConstantBufferVS;
+    ID3D11Buffer *mCurrentVertexConstantBuffer;
+    unsigned int mCurrentConstantBufferVS[gl::IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS];
+
+    dx_PixelConstants mPixelConstants;
+    dx_PixelConstants mAppliedPixelConstants;
+    ID3D11Buffer *mDriverConstantBufferPS;
+    ID3D11Buffer *mCurrentPixelConstantBuffer;
+    unsigned int mCurrentConstantBufferPS[gl::IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS];
+
+    ID3D11Buffer *mCurrentGeometryConstantBuffer;
+
+    // Vertex, index and input layouts
+    VertexDataManager *mVertexDataManager;
+    IndexDataManager *mIndexDataManager;
+    InputLayoutCache mInputLayoutCache;
+
+    StreamingIndexBufferInterface *mLineLoopIB;
+    StreamingIndexBufferInterface *mTriangleFanIB;
+
+    // Texture copy resources
+    Blit11 *mBlit;
+    PixelTransfer11 *mPixelTransfer;
+
+    // Masked clear resources
+    Clear11 *mClear;
+
+    // Sync query
+    ID3D11Query *mSyncQuery;
+
+    ID3D11Device *mDevice;
+    D3D_FEATURE_LEVEL mFeatureLevel;
+    ID3D11DeviceContext *mDeviceContext;
+    IDXGIAdapter *mDxgiAdapter;
+    DXGI_ADAPTER_DESC mAdapterDescription;
+    char mDescription[128];
+    IDXGIFactory *mDxgiFactory;
+};
+
+}
+#endif // LIBGLESV2_RENDERER_RENDERER11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/ShaderExecutable11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.cpp
index 2e455e3af5..52f34887fb 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/ShaderExecutable11.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -8,9 +7,8 @@
 // ShaderExecutable11.cpp: Implements a D3D11-specific class to contain shader
 // executable implementation details.
 
-#include "libGLESv2/renderer/d3d11/ShaderExecutable11.h"
-
-#include "common/debug.h"
+#include "libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
 
 namespace rx
 {
@@ -21,18 +19,16 @@ ShaderExecutable11::ShaderExecutable11(const void *function, size_t length, ID3D
     mPixelExecutable = executable;
     mVertexExecutable = NULL;
     mGeometryExecutable = NULL;
-
-    mConstantBuffer = NULL;
+    mStreamOutExecutable = NULL;
 }
 
-ShaderExecutable11::ShaderExecutable11(const void *function, size_t length, ID3D11VertexShader *executable)
+ShaderExecutable11::ShaderExecutable11(const void *function, size_t length, ID3D11VertexShader *executable, ID3D11GeometryShader *streamOut)
     : ShaderExecutable(function, length)
 {
     mVertexExecutable = executable;
     mPixelExecutable = NULL;
     mGeometryExecutable = NULL;
-
-    mConstantBuffer = NULL;
+    mStreamOutExecutable = streamOut;
 }
 
 ShaderExecutable11::ShaderExecutable11(const void *function, size_t length, ID3D11GeometryShader *executable)
@@ -41,29 +37,15 @@ ShaderExecutable11::ShaderExecutable11(const void *function, size_t length, ID3D
     mGeometryExecutable = executable;
     mVertexExecutable = NULL;
     mPixelExecutable = NULL;
-
-    mConstantBuffer = NULL;
+    mStreamOutExecutable = NULL;
 }
 
 ShaderExecutable11::~ShaderExecutable11()
 {
-    if (mVertexExecutable)
-    {
-        mVertexExecutable->Release();
-    }
-    if (mPixelExecutable)
-    {
-        mPixelExecutable->Release();
-    }
-    if (mGeometryExecutable)
-    {
-        mGeometryExecutable->Release();
-    }
-    
-    if (mConstantBuffer)
-    {
-        mConstantBuffer->Release();
-    }
+    SafeRelease(mVertexExecutable);
+    SafeRelease(mPixelExecutable);
+    SafeRelease(mGeometryExecutable);
+    SafeRelease(mStreamOutExecutable);
 }
 
 ShaderExecutable11 *ShaderExecutable11::makeShaderExecutable11(ShaderExecutable *executable)
@@ -87,23 +69,42 @@ ID3D11GeometryShader *ShaderExecutable11::getGeometryShader() const
     return mGeometryExecutable;
 }
 
-ID3D11Buffer *ShaderExecutable11::getConstantBuffer(ID3D11Device *device, unsigned int registerCount)
+ID3D11GeometryShader *ShaderExecutable11::getStreamOutShader() const
+{
+    return mStreamOutExecutable;
+}
+
+UniformStorage11::UniformStorage11(Renderer11 *renderer, size_t initialSize)
+    : UniformStorage(initialSize),
+      mConstantBuffer(NULL)
 {
-    if (!mConstantBuffer && registerCount > 0)
+    ID3D11Device *d3d11Device = renderer->getDevice();
+
+    if (initialSize > 0)
     {
         D3D11_BUFFER_DESC constantBufferDescription = {0};
-        constantBufferDescription.ByteWidth = registerCount * sizeof(float[4]);
+        constantBufferDescription.ByteWidth = initialSize;
         constantBufferDescription.Usage = D3D11_USAGE_DYNAMIC;
         constantBufferDescription.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
         constantBufferDescription.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
         constantBufferDescription.MiscFlags = 0;
         constantBufferDescription.StructureByteStride = 0;
 
-        HRESULT result = device->CreateBuffer(&constantBufferDescription, NULL, &mConstantBuffer);
+        HRESULT result = d3d11Device->CreateBuffer(&constantBufferDescription, NULL, &mConstantBuffer);
+        UNUSED_ASSERTION_VARIABLE(result);
         ASSERT(SUCCEEDED(result));
     }
+}
 
-    return mConstantBuffer;
+UniformStorage11::~UniformStorage11()
+{
+    SafeRelease(mConstantBuffer);
 }
 
-}
\ No newline at end of file
+const UniformStorage11 *UniformStorage11::makeUniformStorage11(const UniformStorage *uniformStorage)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(const UniformStorage11*, uniformStorage));
+    return static_cast<const UniformStorage11*>(uniformStorage);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/ShaderExecutable11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.h
index c6ec1cf7d2..74a1e03915 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/ShaderExecutable11.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -14,12 +14,14 @@
 
 namespace rx
 {
+class Renderer11;
+class UniformStorage11;
 
 class ShaderExecutable11 : public ShaderExecutable
 {
   public:
     ShaderExecutable11(const void *function, size_t length, ID3D11PixelShader *executable);
-    ShaderExecutable11(const void *function, size_t length, ID3D11VertexShader *executable);
+    ShaderExecutable11(const void *function, size_t length, ID3D11VertexShader *executable, ID3D11GeometryShader *streamOut);
     ShaderExecutable11(const void *function, size_t length, ID3D11GeometryShader *executable);
 
     virtual ~ShaderExecutable11();
@@ -29,8 +31,7 @@ class ShaderExecutable11 : public ShaderExecutable
     ID3D11PixelShader *getPixelShader() const;
     ID3D11VertexShader *getVertexShader() const;
     ID3D11GeometryShader *getGeometryShader() const;
-
-    ID3D11Buffer *getConstantBuffer(ID3D11Device *device, unsigned int registerCount);
+    ID3D11GeometryShader *getStreamOutShader() const;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(ShaderExecutable11);
@@ -38,7 +39,20 @@ class ShaderExecutable11 : public ShaderExecutable
     ID3D11PixelShader *mPixelExecutable;
     ID3D11VertexShader *mVertexExecutable;
     ID3D11GeometryShader *mGeometryExecutable;
+    ID3D11GeometryShader *mStreamOutExecutable;
+};
+
+class UniformStorage11 : public UniformStorage
+{
+  public:
+    UniformStorage11(Renderer11 *renderer, size_t initialSize);
+    virtual ~UniformStorage11();
+
+    static const UniformStorage11 *makeUniformStorage11(const UniformStorage *uniformStorage);
 
+    ID3D11Buffer *getConstantBuffer() const { return mConstantBuffer; }
+
+  private:
     ID3D11Buffer *mConstantBuffer;
 };
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
index bd97d5cff5..4b29be055d 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
@@ -1,19 +1,20 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 // SwapChain11.cpp: Implements a back-end specific class for the D3D11 swap chain.
 
-#include "libGLESv2/renderer/d3d11/SwapChain11.h"
+#include "common/platform.h"
+#include "libGLESv2/renderer/d3d/d3d11/SwapChain11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
 
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthrough11vs.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthroughrgba11ps.h"
+// Precompiled shaders
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough2dvs.h"
+#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dps.h"
 
 namespace rx
 {
@@ -30,6 +31,7 @@ SwapChain11::SwapChain11(Renderer11 *renderer, EGLNativeWindowType window, HANDL
     mOffscreenSRView = NULL;
     mDepthStencilTexture = NULL;
     mDepthStencilDSView = NULL;
+    mDepthStencilSRView = NULL;
     mQuadVB = NULL;
     mPassThroughSampler = NULL;
     mPassThroughIL = NULL;
@@ -37,6 +39,8 @@ SwapChain11::SwapChain11(Renderer11 *renderer, EGLNativeWindowType window, HANDL
     mPassThroughPS = NULL;
     mWidth = -1;
     mHeight = -1;
+    mViewportWidth = -1;
+    mViewportHeight = -1;
     mSwapInterval = 0;
     mAppCreatedShareHandle = mShareHandle != NULL;
     mPassThroughResourcesInit = false;
@@ -57,6 +61,7 @@ void SwapChain11::release()
     SafeRelease(mOffscreenSRView);
     SafeRelease(mDepthStencilTexture);
     SafeRelease(mDepthStencilDSView);
+    SafeRelease(mDepthStencilSRView);
     SafeRelease(mQuadVB);
     SafeRelease(mPassThroughSampler);
     SafeRelease(mPassThroughIL);
@@ -76,6 +81,7 @@ void SwapChain11::releaseOffscreenTexture()
     SafeRelease(mOffscreenSRView);
     SafeRelease(mDepthStencilTexture);
     SafeRelease(mDepthStencilDSView);
+    SafeRelease(mDepthStencilSRView);
 }
 
 EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHeight)
@@ -89,6 +95,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
     ASSERT(backbufferHeight >= 1);
 
     // Preserve the render target content
+#if !defined(ANGLE_PLATFORM_WINRT)
     ID3D11Texture2D *previousOffscreenTexture = mOffscreenTexture;
     if (previousOffscreenTexture)
     {
@@ -96,9 +103,12 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
     }
     const int previousWidth = mWidth;
     const int previousHeight = mHeight;
+#endif
 
     releaseOffscreenTexture();
 
+    const d3d11::TextureFormat &backbufferFormatInfo = d3d11::GetTextureFormatInfo(mBackBufferFormat);
+
     // If the app passed in a share handle, open the resource
     // See EGL_ANGLE_d3d_share_handle_client_buffer
     if (mAppCreatedShareHandle)
@@ -114,7 +124,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
         }
 
         result = tempResource11->QueryInterface(__uuidof(ID3D11Texture2D), (void**)&mOffscreenTexture);
-        tempResource11->Release();
+        SafeRelease(tempResource11);
 
         if (FAILED(result))
         {
@@ -127,11 +137,11 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
         D3D11_TEXTURE2D_DESC offscreenTextureDesc = {0};
         mOffscreenTexture->GetDesc(&offscreenTextureDesc);
 
-        if (offscreenTextureDesc.Width != (UINT)backbufferWidth
-            || offscreenTextureDesc.Height != (UINT)backbufferHeight
-            || offscreenTextureDesc.Format != gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat)
-            || offscreenTextureDesc.MipLevels != 1
-            || offscreenTextureDesc.ArraySize != 1)
+        if (offscreenTextureDesc.Width != (UINT)backbufferWidth ||
+            offscreenTextureDesc.Height != (UINT)backbufferHeight ||
+            offscreenTextureDesc.Format != backbufferFormatInfo.texFormat ||
+            offscreenTextureDesc.MipLevels != 1 ||
+            offscreenTextureDesc.ArraySize != 1)
         {
             ERR("Invalid texture parameters in the shared offscreen texture pbuffer");
             release();
@@ -145,7 +155,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
         D3D11_TEXTURE2D_DESC offscreenTextureDesc = {0};
         offscreenTextureDesc.Width = backbufferWidth;
         offscreenTextureDesc.Height = backbufferHeight;
-        offscreenTextureDesc.Format = gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat);
+        offscreenTextureDesc.Format = backbufferFormatInfo.texFormat;
         offscreenTextureDesc.MipLevels = 1;
         offscreenTextureDesc.ArraySize = 1;
         offscreenTextureDesc.SampleDesc.Count = 1;
@@ -172,7 +182,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
             }
         }
 
-        d3d11::SetDebugName(mOffscreenTexture, "Offscreen texture");
+        d3d11::SetDebugName(mOffscreenTexture, "Offscreen back buffer texture");
 
         // EGL_ANGLE_surface_d3d_texture_2d_share_handle requires that we store a share handle for the client
         if (useSharedResource)
@@ -188,7 +198,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
             else
             {
                 result = offscreenTextureResource->GetSharedHandle(&mShareHandle);
-                offscreenTextureResource->Release();
+                SafeRelease(offscreenTextureResource);
 
                 if (FAILED(result))
                 {
@@ -198,32 +208,45 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
             }
         }
     }
-        
-    HRESULT result = device->CreateRenderTargetView(mOffscreenTexture, NULL, &mOffscreenRTView);
 
+
+    D3D11_RENDER_TARGET_VIEW_DESC offscreenRTVDesc;
+    offscreenRTVDesc.Format = backbufferFormatInfo.rtvFormat;
+    offscreenRTVDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2D;
+    offscreenRTVDesc.Texture2D.MipSlice = 0;
+
+    HRESULT result = device->CreateRenderTargetView(mOffscreenTexture, &offscreenRTVDesc, &mOffscreenRTView);
     ASSERT(SUCCEEDED(result));
-    d3d11::SetDebugName(mOffscreenRTView, "Offscreen render target");
+    d3d11::SetDebugName(mOffscreenRTView, "Offscreen back buffer render target");
 
-    result = device->CreateShaderResourceView(mOffscreenTexture, NULL, &mOffscreenSRView);
+    D3D11_SHADER_RESOURCE_VIEW_DESC offscreenSRVDesc;
+    offscreenSRVDesc.Format = backbufferFormatInfo.srvFormat;
+    offscreenSRVDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D;
+    offscreenSRVDesc.Texture2D.MostDetailedMip = 0;
+    offscreenSRVDesc.Texture2D.MipLevels = -1;
+
+    result = device->CreateShaderResourceView(mOffscreenTexture, &offscreenSRVDesc, &mOffscreenSRView);
     ASSERT(SUCCEEDED(result));
-    d3d11::SetDebugName(mOffscreenSRView, "Offscreen shader resource");
+    d3d11::SetDebugName(mOffscreenSRView, "Offscreen back buffer shader resource");
+
+    const d3d11::TextureFormat &depthBufferFormatInfo = d3d11::GetTextureFormatInfo(mDepthBufferFormat);
 
     if (mDepthBufferFormat != GL_NONE)
     {
-        D3D11_TEXTURE2D_DESC depthStencilDesc = {0};
-        depthStencilDesc.Width = backbufferWidth;
-        depthStencilDesc.Height = backbufferHeight;
-        depthStencilDesc.Format = gl_d3d11::ConvertRenderbufferFormat(mDepthBufferFormat);
-        depthStencilDesc.MipLevels = 1;
-        depthStencilDesc.ArraySize = 1;
-        depthStencilDesc.SampleDesc.Count = 1;
-        depthStencilDesc.SampleDesc.Quality = 0;
-        depthStencilDesc.Usage = D3D11_USAGE_DEFAULT;
-        depthStencilDesc.BindFlags = D3D11_BIND_DEPTH_STENCIL;
-        depthStencilDesc.CPUAccessFlags = 0;
-        depthStencilDesc.MiscFlags = 0;
-
-        result = device->CreateTexture2D(&depthStencilDesc, NULL, &mDepthStencilTexture);
+        D3D11_TEXTURE2D_DESC depthStencilTextureDesc;
+        depthStencilTextureDesc.Width = backbufferWidth;
+        depthStencilTextureDesc.Height = backbufferHeight;
+        depthStencilTextureDesc.Format = depthBufferFormatInfo.texFormat;
+        depthStencilTextureDesc.MipLevels = 1;
+        depthStencilTextureDesc.ArraySize = 1;
+        depthStencilTextureDesc.SampleDesc.Count = 1;
+        depthStencilTextureDesc.SampleDesc.Quality = 0;
+        depthStencilTextureDesc.Usage = D3D11_USAGE_DEFAULT;
+        depthStencilTextureDesc.BindFlags = D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE;
+        depthStencilTextureDesc.CPUAccessFlags = 0;
+        depthStencilTextureDesc.MiscFlags = 0;
+
+        result = device->CreateTexture2D(&depthStencilTextureDesc, NULL, &mDepthStencilTexture);
         if (FAILED(result))
         {
             ERR("Could not create depthstencil surface for new swap chain: 0x%08X", result);
@@ -238,16 +261,37 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
                 return EGL_BAD_ALLOC;
             }
         }
-        d3d11::SetDebugName(mDepthStencilTexture, "Depth stencil texture");
+        d3d11::SetDebugName(mDepthStencilTexture, "Offscreen depth stencil texture");
+
+        D3D11_DEPTH_STENCIL_VIEW_DESC depthStencilDesc;
+        depthStencilDesc.Format = depthBufferFormatInfo.dsvFormat;
+        depthStencilDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D;
+        depthStencilDesc.Flags = 0;
+        depthStencilDesc.Texture2D.MipSlice = 0;
 
-        result = device->CreateDepthStencilView(mDepthStencilTexture, NULL, &mDepthStencilDSView);
+        result = device->CreateDepthStencilView(mDepthStencilTexture, &depthStencilDesc, &mDepthStencilDSView);
         ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mDepthStencilDSView, "Depth stencil view");
+        d3d11::SetDebugName(mDepthStencilDSView, "Offscreen depth stencil view");
+
+        D3D11_SHADER_RESOURCE_VIEW_DESC depthStencilSRVDesc;
+        depthStencilSRVDesc.Format = depthBufferFormatInfo.srvFormat;
+        depthStencilSRVDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D;
+        depthStencilSRVDesc.Texture2D.MostDetailedMip = 0;
+        depthStencilSRVDesc.Texture2D.MipLevels = -1;
+
+        result = device->CreateShaderResourceView(mDepthStencilTexture, &depthStencilSRVDesc, &mDepthStencilSRView);
+        ASSERT(SUCCEEDED(result));
+        d3d11::SetDebugName(mDepthStencilSRView, "Offscreen depth stencil shader resource");
     }
 
     mWidth = backbufferWidth;
     mHeight = backbufferHeight;
+#if !defined(ANGLE_PLATFORM_WINRT) || WINAPI_FAMILY==WINAPI_FAMILY_PC_APP
+    mViewportWidth = backbufferWidth;
+    mViewportHeight = backbufferHeight;
+#endif
 
+#if !defined(ANGLE_PLATFORM_WINRT)
     if (previousOffscreenTexture != NULL)
     {
         D3D11_BOX sourceBox = {0};
@@ -262,13 +306,14 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
         const int yoffset = std::max(mHeight - previousHeight, 0);
         deviceContext->CopySubresourceRegion(mOffscreenTexture, 0, 0, yoffset, 0, previousOffscreenTexture, 0, &sourceBox);
 
-        previousOffscreenTexture->Release();
+        SafeRelease(previousOffscreenTexture);
 
         if (mSwapChain)
         {
-            swapRect(0, 0, mWidth, mHeight);
+            swapRect(0, 0, mWidth, mHeight, SWAP_NORMAL);
         }
     }
+#endif
 
     return EGL_SUCCESS;
 }
@@ -295,8 +340,15 @@ EGLint SwapChain11::resize(EGLint backbufferWidth, EGLint backbufferHeight)
     SafeRelease(mBackBufferRTView);
 
     // Resize swap chain
-    DXGI_FORMAT backbufferDXGIFormat = gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat);
-    HRESULT result = mSwapChain->ResizeBuffers(2, backbufferWidth, backbufferHeight, backbufferDXGIFormat, 0);
+    HRESULT result;
+#if !defined(ANGLE_PLATFORM_WINRT) || WINAPI_FAMILY==WINAPI_FAMILY_PC_APP // Windows phone swap chain is never resized, only the texture is
+#if !defined(ANGLE_PLATFORM_WINRT)
+    const int bufferCount = 1;
+#else
+    const int bufferCount = 2;
+#endif
+    const d3d11::TextureFormat &backbufferFormatInfo = d3d11::GetTextureFormatInfo(mBackBufferFormat);
+    result = mSwapChain->ResizeBuffers(bufferCount, backbufferWidth, backbufferHeight, backbufferFormatInfo.texFormat, 0);
 
     if (FAILED(result))
     {
@@ -312,6 +364,7 @@ EGLint SwapChain11::resize(EGLint backbufferWidth, EGLint backbufferHeight)
             return EGL_BAD_ALLOC;
         }
     }
+#endif
 
     result = mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&mBackBufferTexture);
     ASSERT(SUCCEEDED(result));
@@ -361,51 +414,60 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
 
     if (mWindow)
     {
-#if !defined(ANGLE_OS_WINRT)
+        const d3d11::TextureFormat &backbufferFormatInfo = d3d11::GetTextureFormatInfo(mBackBufferFormat);
+
         IDXGIFactory *factory = mRenderer->getDxgiFactory();
 
+#if !defined(ANGLE_PLATFORM_WINRT)
         DXGI_SWAP_CHAIN_DESC swapChainDesc = {0};
-        swapChainDesc.BufferDesc.Format = gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat);
         swapChainDesc.BufferDesc.Width = backbufferWidth;
         swapChainDesc.BufferDesc.Height = backbufferHeight;
-        swapChainDesc.BufferCount = 2;
-        swapChainDesc.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED;
-        swapChainDesc.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED;
         swapChainDesc.BufferDesc.RefreshRate.Numerator = 0;
         swapChainDesc.BufferDesc.RefreshRate.Denominator = 1;
-        swapChainDesc.Windowed = TRUE;
+        swapChainDesc.BufferDesc.Format = backbufferFormatInfo.texFormat;
+        swapChainDesc.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED;
+        swapChainDesc.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED;
+        swapChainDesc.SampleDesc.Count = 1;
+        swapChainDesc.SampleDesc.Quality = 0;
+        swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
+        swapChainDesc.BufferCount = 1;
         swapChainDesc.OutputWindow = mWindow;
+        swapChainDesc.Windowed = TRUE;
+        swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_DISCARD;
+        swapChainDesc.Flags = 0;
+
+        HRESULT result = factory->CreateSwapChain(device, &swapChainDesc, &mSwapChain);
 #else
-        IDXGIFactory2 *factory;
-        HRESULT result = mRenderer->getDxgiFactory()->QueryInterface(IID_PPV_ARGS(&factory));
+        IDXGIFactory2 *factory2;
+        HRESULT result = factory->QueryInterface(IID_PPV_ARGS(&factory2));
         ASSERT(SUCCEEDED(result));
 
         DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0};
-        swapChainDesc.Format = gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat);
-        swapChainDesc.Width = backbufferWidth;
-        swapChainDesc.Height = backbufferHeight;
+        swapChainDesc.Width = 0;
+        swapChainDesc.Height = 0;
+        swapChainDesc.Format = backbufferFormatInfo.texFormat;
+        swapChainDesc.SampleDesc.Count = 1;
+        swapChainDesc.SampleDesc.Quality = 0;
+        swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
         swapChainDesc.Stereo = FALSE;
-#if !defined(ANGLE_OS_WINPHONE)
+        swapChainDesc.Flags = 0;
+#if WINAPI_FAMILY==WINAPI_FAMILY_PC_APP
+        swapChainDesc.Scaling = DXGI_SCALING_NONE;
         swapChainDesc.BufferCount = 2;
         swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL;
-#else
+#elif WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
         swapChainDesc.BufferCount = 1;
         swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_DISCARD;
 #endif
-#endif
-        swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
-        swapChainDesc.Flags = 0;
-        swapChainDesc.SampleDesc.Count = 1;
-        swapChainDesc.SampleDesc.Quality = 0;
 
-#if !defined(ANGLE_OS_WINRT)
-        HRESULT result = factory->CreateSwapChain(device, &swapChainDesc, &mSwapChain);
-#else
         IDXGISwapChain1 *swapChain;
-        result = factory->CreateSwapChainForCoreWindow(device, mWindow, &swapChainDesc, NULL, &swapChain);
+        result = factory2->CreateSwapChainForCoreWindow(device, mWindow, &swapChainDesc, NULL, &swapChain);
         mSwapChain = swapChain;
+        HRESULT hr = swapChain->GetDesc1(&swapChainDesc);
+        ASSERT(SUCCEEDED(hr));
+        mViewportWidth = swapChainDesc.Width;
+        mViewportHeight = swapChainDesc.Height;
 #endif
-
         if (FAILED(result))
         {
             ERR("Could not create additional swap chains or offscreen surfaces: %08lX", result);
@@ -415,28 +477,10 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
             {
                 return EGL_CONTEXT_LOST;
             }
-#if !defined(ANGLE_OS_WINRT)
             else
             {
-                // We cannot create a swap chain for an HWND that is owned by a different process on some versions of
-                // windows
-                DWORD currentProcessId = GetCurrentProcessId();
-                DWORD wndProcessId;
-                GetWindowThreadProcessId(mWindow, &wndProcessId);
-
-                if (currentProcessId != wndProcessId)
-                {
-                    ERR("Could not create swap chain, window owned by different process");
-                    return EGL_BAD_NATIVE_WINDOW;
-                }
-                else
-                {
-                    return EGL_BAD_ALLOC;
-                }
+                return EGL_BAD_ALLOC;
             }
-#else
-            return EGL_BAD_ALLOC;
-#endif
         }
 
         result = mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&mBackBufferTexture);
@@ -493,7 +537,7 @@ void SwapChain11::initPassThroughResources()
     samplerDesc.BorderColor[2] = 0.0f;
     samplerDesc.BorderColor[3] = 0.0f;
     samplerDesc.MinLOD = 0;
-    samplerDesc.MaxLOD = D3D11_FLOAT32_MAX;
+    samplerDesc.MaxLOD = FLT_MAX;
 
     result = device->CreateSamplerState(&samplerDesc, &mPassThroughSampler);
     ASSERT(SUCCEEDED(result));
@@ -505,21 +549,21 @@ void SwapChain11::initPassThroughResources()
         { "TEXCOORD", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 8, D3D11_INPUT_PER_VERTEX_DATA, 0 },
     };
 
-    result = device->CreateInputLayout(quadLayout, 2, g_VS_Passthrough, sizeof(g_VS_Passthrough), &mPassThroughIL);
+    result = device->CreateInputLayout(quadLayout, 2, g_VS_Passthrough2D, sizeof(g_VS_Passthrough2D), &mPassThroughIL);
     ASSERT(SUCCEEDED(result));
     d3d11::SetDebugName(mPassThroughIL, "Swap chain pass through layout");
 
-    result = device->CreateVertexShader(g_VS_Passthrough, sizeof(g_VS_Passthrough), NULL, &mPassThroughVS);
+    result = device->CreateVertexShader(g_VS_Passthrough2D, sizeof(g_VS_Passthrough2D), NULL, &mPassThroughVS);
     ASSERT(SUCCEEDED(result));
     d3d11::SetDebugName(mPassThroughVS, "Swap chain pass through vertex shader");
 
-    result = device->CreatePixelShader(g_PS_PassthroughRGBA, sizeof(g_PS_PassthroughRGBA), NULL, &mPassThroughPS);
+    result = device->CreatePixelShader(g_PS_PassthroughRGBA2D, sizeof(g_PS_PassthroughRGBA2D), NULL, &mPassThroughPS);
     ASSERT(SUCCEEDED(result));
     d3d11::SetDebugName(mPassThroughPS, "Swap chain pass through pixel shader");
 }
 
 // parameters should be validated/clamped by caller
-EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
+EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint flags)
 {
     if (!mSwapChain)
     {
@@ -550,10 +594,13 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
     float u2 = (x + width) / float(mWidth);
     float v2 = (y + height) / float(mHeight);
 
-    d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, u1, v1);
-    d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, u1, v2);
-    d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, u2, v1);
-    d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, u2, v2);
+    const int rotateL = flags & SWAP_ROTATE_90;
+    const int rotateR = flags & SWAP_ROTATE_270;
+
+    d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, rotateL ? u2 : u1, rotateR ? v2 : v1);
+    d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, rotateR ? u2 : u1, rotateL ? v1 : v2);
+    d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, rotateR ? u1 : u2, rotateL ? v2 : v1);
+    d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, rotateL ? u1 : u2, rotateR ? v1 : v2);
 
     deviceContext->Unmap(mQuadVB, 0);
 
@@ -583,8 +630,8 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
     D3D11_VIEWPORT viewport;
     viewport.TopLeftX = 0;
     viewport.TopLeftY = 0;
-    viewport.Width = mWidth;
-    viewport.Height = mHeight;
+    viewport.Width = mViewportWidth;
+    viewport.Height = mViewportHeight;
     viewport.MinDepth = 0.0f;
     viewport.MaxDepth = 1.0f;
     deviceContext->RSSetViewports(1, &viewport);
@@ -596,7 +643,7 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
     // Draw
     deviceContext->Draw(4, 0);
 
-#if ANGLE_FORCE_VSYNC_OFF
+#ifdef ANGLE_FORCE_VSYNC_OFF
     result = mSwapChain->Present(0, 0);
 #else
     result = mSwapChain->Present(mSwapInterval, 0);
@@ -605,6 +652,7 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
     if (result == DXGI_ERROR_DEVICE_REMOVED)
     {
         HRESULT removedReason = device->GetDeviceRemovedReason();
+        UNUSED_TRACE_VARIABLE(removedReason);
         ERR("Present failed: the D3D11 device was removed: 0x%08X", removedReason);
         return EGL_CONTEXT_LOST;
     }
@@ -628,61 +676,33 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
     return EGL_SUCCESS;
 }
 
-// Increments refcount on texture.
-// caller must Release() the returned texture
 ID3D11Texture2D *SwapChain11::getOffscreenTexture()
 {
-    if (mOffscreenTexture)
-    {
-        mOffscreenTexture->AddRef();
-    }
-
     return mOffscreenTexture;
 }
 
-// Increments refcount on view.
-// caller must Release() the returned view
 ID3D11RenderTargetView *SwapChain11::getRenderTarget()
 {
-    if (mOffscreenRTView)
-    {
-        mOffscreenRTView->AddRef();
-    }
-
     return mOffscreenRTView;
 }
 
-// Increments refcount on view.
-// caller must Release() the returned view
 ID3D11ShaderResourceView *SwapChain11::getRenderTargetShaderResource()
 {
-    if (mOffscreenSRView)
-    {
-        mOffscreenSRView->AddRef();
-    }
-
     return mOffscreenSRView;
 }
 
-// Increments refcount on view.
-// caller must Release() the returned view
 ID3D11DepthStencilView *SwapChain11::getDepthStencil()
 {
-    if (mDepthStencilDSView)
-    {
-        mDepthStencilDSView->AddRef();
-    }
-
     return mDepthStencilDSView;
 }
 
-ID3D11Texture2D *SwapChain11::getDepthStencilTexture()
+ID3D11ShaderResourceView * SwapChain11::getDepthStencilShaderResource()
 {
-    if (mDepthStencilTexture)
-    {
-        mDepthStencilTexture->AddRef();
-    }
+    return mDepthStencilSRView;
+}
 
+ID3D11Texture2D *SwapChain11::getDepthStencilTexture()
+{
     return mDepthStencilTexture;
 }
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h
index 2a030c839d..b30b78568a 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h
@@ -25,7 +25,7 @@ class SwapChain11 : public SwapChain
 
     EGLint resize(EGLint backbufferWidth, EGLint backbufferHeight);
     virtual EGLint reset(EGLint backbufferWidth, EGLint backbufferHeight, EGLint swapInterval);
-    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height);
+    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint flags);
     virtual void recreate();
 
     virtual ID3D11Texture2D *getOffscreenTexture();
@@ -34,6 +34,7 @@ class SwapChain11 : public SwapChain
 
     virtual ID3D11Texture2D *getDepthStencilTexture();
     virtual ID3D11DepthStencilView *getDepthStencil();
+    virtual ID3D11ShaderResourceView *getDepthStencilShaderResource();
 
     EGLint getWidth() const { return mWidth; }
     EGLint getHeight() const { return mHeight; }
@@ -51,6 +52,8 @@ class SwapChain11 : public SwapChain
     Renderer11 *mRenderer;
     EGLint mHeight;
     EGLint mWidth;
+    EGLint mViewportWidth;
+    EGLint mViewportHeight;
     bool mAppCreatedShareHandle;
     unsigned int mSwapInterval;
     bool mPassThroughResourcesInit;
@@ -66,6 +69,7 @@ class SwapChain11 : public SwapChain
 
     ID3D11Texture2D *mDepthStencilTexture;
     ID3D11DepthStencilView *mDepthStencilDSView;
+    ID3D11ShaderResourceView *mDepthStencilSRView;
 
     ID3D11Buffer *mQuadVB;
     ID3D11SamplerState *mPassThroughSampler;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp
new file mode 100644
index 0000000000..91e7147da6
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp
@@ -0,0 +1,1937 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureStorage11.cpp: Implements the abstract rx::TextureStorage11 class and its concrete derived
+// classes TextureStorage11_2D and TextureStorage11_Cube, which act as the interface to the D3D11 texture.
+
+#include "libGLESv2/renderer/d3d/d3d11/TextureStorage11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderTarget11.h"
+#include "libGLESv2/renderer/d3d/d3d11/SwapChain11.h"
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/Blit11.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Image11.h"
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/ImageIndex.h"
+
+#include "common/utilities.h"
+
+namespace rx
+{
+
+TextureStorage11::SwizzleCacheValue::SwizzleCacheValue()
+    : swizzleRed(GL_NONE), swizzleGreen(GL_NONE), swizzleBlue(GL_NONE), swizzleAlpha(GL_NONE)
+{
+}
+
+TextureStorage11::SwizzleCacheValue::SwizzleCacheValue(GLenum red, GLenum green, GLenum blue, GLenum alpha)
+    : swizzleRed(red), swizzleGreen(green), swizzleBlue(blue), swizzleAlpha(alpha)
+{
+}
+
+bool TextureStorage11::SwizzleCacheValue::operator==(const SwizzleCacheValue &other) const
+{
+    return swizzleRed == other.swizzleRed &&
+           swizzleGreen == other.swizzleGreen &&
+           swizzleBlue == other.swizzleBlue &&
+           swizzleAlpha == other.swizzleAlpha;
+}
+
+bool TextureStorage11::SwizzleCacheValue::operator!=(const SwizzleCacheValue &other) const
+{
+    return !(*this == other);
+}
+
+TextureStorage11::SRVKey::SRVKey(int baseLevel, int mipLevels, bool swizzle)
+    : baseLevel(baseLevel), mipLevels(mipLevels), swizzle(swizzle)
+{
+}
+
+bool TextureStorage11::SRVKey::operator==(const SRVKey &rhs) const
+{
+    return baseLevel == rhs.baseLevel &&
+           mipLevels == rhs.mipLevels &&
+           swizzle == rhs.swizzle;
+}
+
+TextureStorage11::SRVCache::~SRVCache()
+{
+    for (size_t i = 0; i < cache.size(); i++)
+    {
+        SafeRelease(cache[i].srv);
+    }
+}
+
+ID3D11ShaderResourceView *TextureStorage11::SRVCache::find(const SRVKey &key) const
+{
+    for (size_t i = 0; i < cache.size(); i++)
+    {
+        if (cache[i].key == key)
+        {
+            return cache[i].srv;
+        }
+    }
+
+    return NULL;
+}
+
+ID3D11ShaderResourceView *TextureStorage11::SRVCache::add(const SRVKey &key, ID3D11ShaderResourceView *srv)
+{
+    SRVPair pair = {key, srv};
+    cache.push_back(pair);
+
+    return srv;
+}
+
+TextureStorage11::TextureStorage11(Renderer *renderer, UINT bindFlags)
+    : mBindFlags(bindFlags),
+      mTopLevel(0),
+      mMipLevels(0),
+      mTextureFormat(DXGI_FORMAT_UNKNOWN),
+      mShaderResourceFormat(DXGI_FORMAT_UNKNOWN),
+      mRenderTargetFormat(DXGI_FORMAT_UNKNOWN),
+      mDepthStencilFormat(DXGI_FORMAT_UNKNOWN),
+      mTextureWidth(0),
+      mTextureHeight(0),
+      mTextureDepth(0)
+{
+    mRenderer = Renderer11::makeRenderer11(renderer);
+
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        mLevelSRVs[i] = NULL;
+    }
+}
+
+TextureStorage11::~TextureStorage11()
+{
+    for (unsigned int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        SafeRelease(mLevelSRVs[level]);
+    }
+}
+
+TextureStorage11 *TextureStorage11::makeTextureStorage11(TextureStorage *storage)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11*, storage));
+    return static_cast<TextureStorage11*>(storage);
+}
+
+DWORD TextureStorage11::GetTextureBindFlags(GLenum internalFormat, bool renderTarget)
+{
+    UINT bindFlags = 0;
+
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalFormat);
+    if (formatInfo.srvFormat != DXGI_FORMAT_UNKNOWN)
+    {
+        bindFlags |= D3D11_BIND_SHADER_RESOURCE;
+    }
+    if (formatInfo.dsvFormat != DXGI_FORMAT_UNKNOWN)
+    {
+        bindFlags |= D3D11_BIND_DEPTH_STENCIL;
+    }
+    if (formatInfo.rtvFormat != DXGI_FORMAT_UNKNOWN && renderTarget)
+    {
+        bindFlags |= D3D11_BIND_RENDER_TARGET;
+    }
+
+    return bindFlags;
+}
+
+UINT TextureStorage11::getBindFlags() const
+{
+    return mBindFlags;
+}
+
+int TextureStorage11::getTopLevel() const
+{
+    return mTopLevel;
+}
+
+bool TextureStorage11::isRenderTarget() const
+{
+    return (mBindFlags & (D3D11_BIND_RENDER_TARGET | D3D11_BIND_DEPTH_STENCIL)) != 0;
+}
+
+bool TextureStorage11::isManaged() const
+{
+    return false;
+}
+
+int TextureStorage11::getLevelCount() const
+{
+    return mMipLevels - mTopLevel;
+}
+
+int TextureStorage11::getLevelWidth(int mipLevel) const
+{
+    return std::max(static_cast<int>(mTextureWidth) >> mipLevel, 1);
+}
+
+int TextureStorage11::getLevelHeight(int mipLevel) const
+{
+    return std::max(static_cast<int>(mTextureHeight) >> mipLevel, 1);
+}
+
+int TextureStorage11::getLevelDepth(int mipLevel) const
+{
+    return std::max(static_cast<int>(mTextureDepth) >> mipLevel, 1);
+}
+
+UINT TextureStorage11::getSubresourceIndex(int mipLevel, int layerTarget) const
+{
+    UINT index = 0;
+    if (getResource())
+    {
+        index = D3D11CalcSubresource(mipLevel, layerTarget, mMipLevels);
+    }
+    return index;
+}
+
+ID3D11ShaderResourceView *TextureStorage11::getSRV(const gl::SamplerState &samplerState)
+{
+    bool swizzleRequired = samplerState.swizzleRequired();
+    bool mipmapping = gl::IsMipmapFiltered(samplerState);
+    unsigned int mipLevels = mipmapping ? (samplerState.maxLevel - samplerState.baseLevel) : 1;
+
+    // Make sure there's 'mipLevels' mipmap levels below the base level (offset by the top level,  which corresponds to GL level 0)
+    mipLevels = std::min(mipLevels, mMipLevels - mTopLevel - samplerState.baseLevel);
+
+    if (swizzleRequired)
+    {
+        verifySwizzleExists(samplerState.swizzleRed, samplerState.swizzleGreen, samplerState.swizzleBlue, samplerState.swizzleAlpha);
+    }
+    
+    SRVKey key(samplerState.baseLevel, mipLevels, swizzleRequired);
+    ID3D11ShaderResourceView *srv = srvCache.find(key);
+
+    if(srv)
+    {
+        return srv;
+    }
+
+    DXGI_FORMAT format = (swizzleRequired ? mSwizzleShaderResourceFormat : mShaderResourceFormat);
+    ID3D11Resource *texture = swizzleRequired ? getSwizzleTexture() : getResource();
+
+    srv = createSRV(samplerState.baseLevel, mipLevels, format, texture);
+    
+    return srvCache.add(key, srv);
+}
+
+ID3D11ShaderResourceView *TextureStorage11::getSRVLevel(int mipLevel)
+{
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        if (!mLevelSRVs[mipLevel])
+        {
+            mLevelSRVs[mipLevel] = createSRV(mipLevel, 1, mShaderResourceFormat, getResource());
+        }
+
+        return mLevelSRVs[mipLevel];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+gl::Error TextureStorage11::generateSwizzles(GLenum swizzleRed, GLenum swizzleGreen, GLenum swizzleBlue, GLenum swizzleAlpha)
+{
+    SwizzleCacheValue swizzleTarget(swizzleRed, swizzleGreen, swizzleBlue, swizzleAlpha);
+    for (int level = 0; level < getLevelCount(); level++)
+    {
+        // Check if the swizzle for this level is out of date
+        if (mSwizzleCache[level] != swizzleTarget)
+        {
+            // Need to re-render the swizzle for this level
+            ID3D11ShaderResourceView *sourceSRV = getSRVLevel(level);
+            ID3D11RenderTargetView *destRTV = getSwizzleRenderTarget(level);
+
+            gl::Extents size(getLevelWidth(level), getLevelHeight(level), getLevelDepth(level));
+
+            Blit11 *blitter = mRenderer->getBlitter();
+
+            gl::Error error = blitter->swizzleTexture(sourceSRV, destRTV, size, swizzleRed, swizzleGreen, swizzleBlue, swizzleAlpha);
+            if (error.isError())
+            {
+                return error;
+            }
+
+            mSwizzleCache[level] = swizzleTarget;
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void TextureStorage11::invalidateSwizzleCacheLevel(int mipLevel)
+{
+    if (mipLevel >= 0 && static_cast<unsigned int>(mipLevel) < ArraySize(mSwizzleCache))
+    {
+        // The default constructor of SwizzleCacheValue has GL_NONE for all channels which is not a
+        // valid swizzle combination
+        mSwizzleCache[mipLevel] = SwizzleCacheValue();
+    }
+}
+
+void TextureStorage11::invalidateSwizzleCache()
+{
+    for (unsigned int mipLevel = 0; mipLevel < ArraySize(mSwizzleCache); mipLevel++)
+    {
+        invalidateSwizzleCacheLevel(mipLevel);
+    }
+}
+
+bool TextureStorage11::updateSubresourceLevel(ID3D11Resource *srcTexture, unsigned int sourceSubresource,
+                                              int level, int layerTarget, GLint xoffset, GLint yoffset, GLint zoffset,
+                                              GLsizei width, GLsizei height, GLsizei depth)
+{
+    if (srcTexture)
+    {
+        invalidateSwizzleCacheLevel(level);
+
+        gl::Extents texSize(getLevelWidth(level), getLevelHeight(level), getLevelDepth(level));
+        gl::Box copyArea(xoffset, yoffset, zoffset, width, height, depth);
+
+        bool fullCopy = copyArea.x == 0 &&
+                        copyArea.y == 0 &&
+                        copyArea.z == 0 &&
+                        copyArea.width  == texSize.width &&
+                        copyArea.height == texSize.height &&
+                        copyArea.depth  == texSize.depth;
+
+        ID3D11Resource *dstTexture = getResource();
+        unsigned int dstSubresource = getSubresourceIndex(level + mTopLevel, layerTarget);
+
+        ASSERT(dstTexture);
+
+        const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(mTextureFormat);
+        if (!fullCopy && (dxgiFormatInfo.depthBits > 0 || dxgiFormatInfo.stencilBits > 0))
+        {
+            // CopySubresourceRegion cannot copy partial depth stencils, use the blitter instead
+            Blit11 *blitter = mRenderer->getBlitter();
+
+            return blitter->copyDepthStencil(srcTexture, sourceSubresource, copyArea, texSize,
+                                             dstTexture, dstSubresource, copyArea, texSize,
+                                             NULL);
+        }
+        else
+        {
+            const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(mTextureFormat);
+
+            D3D11_BOX srcBox;
+            srcBox.left = copyArea.x;
+            srcBox.top = copyArea.y;
+            srcBox.right = copyArea.x + roundUp((unsigned int)width, dxgiFormatInfo.blockWidth);
+            srcBox.bottom = copyArea.y + roundUp((unsigned int)height, dxgiFormatInfo.blockHeight);
+            srcBox.front = copyArea.z;
+            srcBox.back = copyArea.z + copyArea.depth;
+
+            ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+            context->CopySubresourceRegion(dstTexture, dstSubresource, copyArea.x, copyArea.y, copyArea.z,
+                                           srcTexture, sourceSubresource, fullCopy ? NULL : &srcBox);
+            return true;
+        }
+    }
+
+    return false;
+}
+
+bool TextureStorage11::copySubresourceLevel(ID3D11Resource* dstTexture, unsigned int dstSubresource,
+                                            int level, int layerTarget, GLint xoffset, GLint yoffset, GLint zoffset,
+                                            GLsizei width, GLsizei height, GLsizei depth)
+{
+    if (dstTexture)
+    {
+        ID3D11Resource *srcTexture = getResource();
+        unsigned int srcSubresource = getSubresourceIndex(level + mTopLevel, layerTarget);
+
+        ASSERT(srcTexture);
+
+        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
+
+        context->CopySubresourceRegion(dstTexture, dstSubresource, xoffset, yoffset, zoffset,
+                                       srcTexture, srcSubresource, NULL);
+        return true;
+    }
+
+    return false;
+}
+
+void TextureStorage11::generateMipmapLayer(RenderTarget11 *source, RenderTarget11 *dest)
+{
+    if (source && dest)
+    {
+        ID3D11ShaderResourceView *sourceSRV = source->getShaderResourceView();
+        ID3D11RenderTargetView *destRTV = dest->getRenderTargetView();
+
+        if (sourceSRV && destRTV)
+        {
+            gl::Box sourceArea(0, 0, 0, source->getWidth(), source->getHeight(), source->getDepth());
+            gl::Extents sourceSize(source->getWidth(), source->getHeight(), source->getDepth());
+
+            gl::Box destArea(0, 0, 0, dest->getWidth(), dest->getHeight(), dest->getDepth());
+            gl::Extents destSize(dest->getWidth(), dest->getHeight(), dest->getDepth());
+
+            Blit11 *blitter = mRenderer->getBlitter();
+
+            blitter->copyTexture(sourceSRV, sourceArea, sourceSize, destRTV, destArea, destSize, NULL,
+                                 gl::GetInternalFormatInfo(source->getInternalFormat()).format, GL_LINEAR);
+        }
+    }
+}
+
+void TextureStorage11::verifySwizzleExists(GLenum swizzleRed, GLenum swizzleGreen, GLenum swizzleBlue, GLenum swizzleAlpha)
+{
+    SwizzleCacheValue swizzleTarget(swizzleRed, swizzleGreen, swizzleBlue, swizzleAlpha);
+    for (unsigned int level = 0; level < mMipLevels; level++)
+    {
+        ASSERT(mSwizzleCache[level] == swizzleTarget);
+    }
+}
+
+TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, SwapChain11 *swapchain)
+    : TextureStorage11(renderer, D3D11_BIND_RENDER_TARGET | D3D11_BIND_SHADER_RESOURCE),
+      mTexture(swapchain->getOffscreenTexture()),
+      mSwizzleTexture(NULL)
+{
+    mTexture->AddRef();
+
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        mAssociatedImages[i] = NULL;
+        mRenderTarget[i] = NULL;
+        mSwizzleRenderTargets[i] = NULL;
+    }
+
+    D3D11_TEXTURE2D_DESC texDesc;
+    mTexture->GetDesc(&texDesc);
+    mMipLevels = texDesc.MipLevels;
+    mTextureFormat = texDesc.Format;
+    mTextureWidth = texDesc.Width;
+    mTextureHeight = texDesc.Height;
+    mTextureDepth = 1;
+
+    ID3D11ShaderResourceView *srv = swapchain->getRenderTargetShaderResource();
+    D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+    srv->GetDesc(&srvDesc);
+    mShaderResourceFormat = srvDesc.Format;
+
+    ID3D11RenderTargetView* offscreenRTV = swapchain->getRenderTarget();
+    D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+    offscreenRTV->GetDesc(&rtvDesc);
+    mRenderTargetFormat = rtvDesc.Format;
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(mTextureFormat);
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(dxgiFormatInfo.internalFormat);
+    mSwizzleTextureFormat = formatInfo.swizzleTexFormat;
+    mSwizzleShaderResourceFormat = formatInfo.swizzleSRVFormat;
+    mSwizzleRenderTargetFormat = formatInfo.swizzleRTVFormat;
+
+    mDepthStencilFormat = DXGI_FORMAT_UNKNOWN;
+
+    initializeSerials(1, 1);
+}
+
+TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels)
+    : TextureStorage11(renderer, GetTextureBindFlags(internalformat, renderTarget)),
+      mTexture(NULL),
+      mSwizzleTexture(NULL)
+{
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        mAssociatedImages[i] = NULL;
+        mRenderTarget[i] = NULL;
+        mSwizzleRenderTargets[i] = NULL;
+    }
+
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalformat);
+    mTextureFormat = formatInfo.texFormat;
+    mShaderResourceFormat = formatInfo.srvFormat;
+    mDepthStencilFormat = formatInfo.dsvFormat;
+    mRenderTargetFormat = formatInfo.rtvFormat;
+    mSwizzleTextureFormat = formatInfo.swizzleTexFormat;
+    mSwizzleShaderResourceFormat = formatInfo.swizzleSRVFormat;
+    mSwizzleRenderTargetFormat = formatInfo.swizzleRTVFormat;
+
+    // if the width or height is not positive this should be treated as an incomplete texture
+    // we handle that here by skipping the d3d texture creation
+    if (width > 0 && height > 0)
+    {
+        // adjust size if needed for compressed textures
+        d3d11::MakeValidSize(false, mTextureFormat, &width, &height, &mTopLevel);
+
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE2D_DESC desc;
+        desc.Width = width;      // Compressed texture size constraints?
+        desc.Height = height;
+        desc.MipLevels = desc.MipLevels = mRenderer->isLevel9() ? 1 : ((levels > 0) ? (mTopLevel + levels) : 0);
+        desc.ArraySize = 1;
+        desc.Format = mTextureFormat;
+        desc.SampleDesc.Count = 1;
+        desc.SampleDesc.Quality = 0;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = getBindFlags();
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = 0;
+
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &mTexture);
+
+        // this can happen from windows TDR
+        if (d3d11::isDeviceLostError(result))
+        {
+            mRenderer->notifyDeviceLost();
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else if (FAILED(result))
+        {
+            ASSERT(result == E_OUTOFMEMORY);
+            ERR("Creating image failed.");
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else
+        {
+            mTexture->GetDesc(&desc);
+            mMipLevels = desc.MipLevels;
+            mTextureWidth = desc.Width;
+            mTextureHeight = desc.Height;
+            mTextureDepth = 1;
+        }
+    }
+
+    initializeSerials(getLevelCount(), 1);
+}
+
+TextureStorage11_2D::~TextureStorage11_2D()
+{
+    for (unsigned i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        if (mAssociatedImages[i] != NULL)
+        {
+            bool imageAssociationCorrect = mAssociatedImages[i]->isAssociatedStorageValid(this);
+            ASSERT(imageAssociationCorrect);
+
+            if (imageAssociationCorrect)
+            {
+                // We must let the Images recover their data before we delete it from the TextureStorage.
+                mAssociatedImages[i]->recoverFromAssociatedStorage();
+            }
+        }
+    }
+
+    SafeRelease(mTexture);
+    SafeRelease(mSwizzleTexture);
+
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        SafeDelete(mRenderTarget[i]);
+        SafeRelease(mSwizzleRenderTargets[i]);
+    }
+}
+
+TextureStorage11_2D *TextureStorage11_2D::makeTextureStorage11_2D(TextureStorage *storage)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11_2D*, storage));
+    return static_cast<TextureStorage11_2D*>(storage);
+}
+
+void TextureStorage11_2D::associateImage(Image11* image, int level, int layerTarget)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        mAssociatedImages[level] = image;
+    }
+}
+
+bool TextureStorage11_2D::isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage)
+{
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        // This validation check should never return false. It means the Image/TextureStorage association is broken.
+        bool retValue = (mAssociatedImages[level] == expectedImage);
+        ASSERT(retValue);
+        return retValue;
+    }
+
+    return false;
+}
+
+// disassociateImage allows an Image to end its association with a Storage.
+void TextureStorage11_2D::disassociateImage(int level, int layerTarget, Image11* expectedImage)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        ASSERT(mAssociatedImages[level] == expectedImage);
+
+        if (mAssociatedImages[level] == expectedImage)
+        {
+            mAssociatedImages[level] = NULL;
+        }
+    }
+}
+
+// releaseAssociatedImage prepares the Storage for a new Image association. It lets the old Image recover its data before ending the association.
+void TextureStorage11_2D::releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        // No need to let the old Image recover its data, if it is also the incoming Image.
+        if (mAssociatedImages[level] != NULL && mAssociatedImages[level] != incomingImage)
+        {
+            // Ensure that the Image is still associated with this TextureStorage. This should be true.
+            bool imageAssociationCorrect = mAssociatedImages[level]->isAssociatedStorageValid(this);
+            ASSERT(imageAssociationCorrect);
+
+            if (imageAssociationCorrect)
+            {
+                // Force the image to recover from storage before its data is overwritten.
+                // This will reset mAssociatedImages[level] to NULL too.
+                mAssociatedImages[level]->recoverFromAssociatedStorage();
+            }
+        }
+    }
+}
+
+ID3D11Resource *TextureStorage11_2D::getResource() const
+{
+    return mTexture;
+}
+
+RenderTarget *TextureStorage11_2D::getRenderTarget(const gl::ImageIndex &index)
+{
+    ASSERT(!index.hasLayer());
+
+    int level = index.mipIndex;
+
+    if (level >= 0 && level < getLevelCount())
+    {
+        if (!mRenderTarget[level])
+        {
+            ID3D11ShaderResourceView *srv = getSRVLevel(level);
+            if (!srv)
+            {
+                return NULL;
+            }
+
+            if (mRenderTargetFormat != DXGI_FORMAT_UNKNOWN)
+            {
+                ID3D11Device *device = mRenderer->getDevice();
+
+                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+                rtvDesc.Format = mRenderTargetFormat;
+                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2D;
+                rtvDesc.Texture2D.MipSlice = mTopLevel + level;
+
+                ID3D11RenderTargetView *rtv;
+                HRESULT result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mRenderTarget[level] = new RenderTarget11(mRenderer, rtv, mTexture, srv, getLevelWidth(level), getLevelHeight(level), 1);
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(rtv);
+            }
+            else if (mDepthStencilFormat != DXGI_FORMAT_UNKNOWN)
+            {
+                ID3D11Device *device = mRenderer->getDevice();
+
+                D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc;
+                dsvDesc.Format = mDepthStencilFormat;
+                dsvDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D;
+                dsvDesc.Texture2D.MipSlice = mTopLevel + level;
+                dsvDesc.Flags = 0;
+
+                ID3D11DepthStencilView *dsv;
+                HRESULT result = device->CreateDepthStencilView(mTexture, &dsvDesc, &dsv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    SafeRelease(srv);
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mRenderTarget[level] = new RenderTarget11(mRenderer, dsv, mTexture, srv, getLevelWidth(level), getLevelHeight(level), 1);
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(dsv);
+            }
+            else
+            {
+                UNREACHABLE();
+            }
+        }
+
+        return mRenderTarget[level];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+ID3D11ShaderResourceView *TextureStorage11_2D::createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture)
+{
+    D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+    srvDesc.Format = format;
+    srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D;
+    srvDesc.Texture2D.MostDetailedMip = mTopLevel + baseLevel;
+    srvDesc.Texture2D.MipLevels = mipLevels;
+
+    ID3D11ShaderResourceView *SRV = NULL;
+
+    ID3D11Device *device = mRenderer->getDevice();
+    HRESULT result = device->CreateShaderResourceView(texture, &srvDesc, &SRV);
+
+    if (result == E_OUTOFMEMORY)
+    {
+        gl::error(GL_OUT_OF_MEMORY);
+    }
+    ASSERT(SUCCEEDED(result));
+
+    return SRV;
+}
+
+void TextureStorage11_2D::generateMipmaps()
+{
+    // Base level must already be defined
+
+    for (int level = 1; level < getLevelCount(); level++)
+    {
+        invalidateSwizzleCacheLevel(level);
+
+        gl::ImageIndex srcIndex = gl::ImageIndex::Make2D(level - 1);
+        gl::ImageIndex destIndex = gl::ImageIndex::Make2D(level);
+
+        RenderTarget11 *source = RenderTarget11::makeRenderTarget11(getRenderTarget(srcIndex));
+        RenderTarget11 *dest = RenderTarget11::makeRenderTarget11(getRenderTarget(destIndex));
+
+        generateMipmapLayer(source, dest);
+    }
+}
+
+ID3D11Resource *TextureStorage11_2D::getSwizzleTexture()
+{
+    if (!mSwizzleTexture)
+    {
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE2D_DESC desc;
+        desc.Width = mTextureWidth;
+        desc.Height = mTextureHeight;
+        desc.MipLevels = mMipLevels;
+        desc.ArraySize = 1;
+        desc.Format = mSwizzleTextureFormat;
+        desc.SampleDesc.Count = 1;
+        desc.SampleDesc.Quality = 0;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = D3D11_BIND_SHADER_RESOURCE | D3D11_BIND_RENDER_TARGET;
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = 0;
+
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &mSwizzleTexture);
+
+        if (result == E_OUTOFMEMORY)
+        {
+            return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11Texture2D*>(NULL));
+        }
+        ASSERT(SUCCEEDED(result));
+    }
+
+    return mSwizzleTexture;
+}
+
+ID3D11RenderTargetView *TextureStorage11_2D::getSwizzleRenderTarget(int mipLevel)
+{
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        if (!mSwizzleRenderTargets[mipLevel])
+        {
+            ID3D11Resource *swizzleTexture = getSwizzleTexture();
+            if (!swizzleTexture)
+            {
+                return NULL;
+            }
+
+            ID3D11Device *device = mRenderer->getDevice();
+
+            D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+            rtvDesc.Format = mSwizzleRenderTargetFormat;
+            rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2D;
+            rtvDesc.Texture2D.MipSlice = mTopLevel + mipLevel;
+
+            HRESULT result = device->CreateRenderTargetView(mSwizzleTexture, &rtvDesc, &mSwizzleRenderTargets[mipLevel]);
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11RenderTargetView*>(NULL));
+            }
+            ASSERT(SUCCEEDED(result));
+        }
+
+        return mSwizzleRenderTargets[mipLevel];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+TextureStorage11_Cube::TextureStorage11_Cube(Renderer *renderer, GLenum internalformat, bool renderTarget, int size, int levels)
+    : TextureStorage11(renderer, GetTextureBindFlags(internalformat, renderTarget))
+{
+    mTexture = NULL;
+    mSwizzleTexture = NULL;
+
+    for (unsigned int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        mSwizzleRenderTargets[level] = NULL;
+        for (unsigned int face = 0; face < 6; face++)
+        {
+            mAssociatedImages[face][level] = NULL;
+            mRenderTarget[face][level] = NULL;
+        }
+    }
+
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalformat);
+    mTextureFormat = formatInfo.texFormat;
+    mShaderResourceFormat = formatInfo.srvFormat;
+    mDepthStencilFormat = formatInfo.dsvFormat;
+    mRenderTargetFormat = formatInfo.rtvFormat;
+    mSwizzleTextureFormat = formatInfo.swizzleTexFormat;
+    mSwizzleShaderResourceFormat = formatInfo.swizzleSRVFormat;
+    mSwizzleRenderTargetFormat = formatInfo.swizzleRTVFormat;
+
+    // if the size is not positive this should be treated as an incomplete texture
+    // we handle that here by skipping the d3d texture creation
+    if (size > 0)
+    {
+        // adjust size if needed for compressed textures
+        int height = size;
+        d3d11::MakeValidSize(false, mTextureFormat, &size, &height, &mTopLevel);
+
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE2D_DESC desc;
+        desc.Width = size;
+        desc.Height = size;
+        desc.MipLevels = ((levels > 0) ? (mTopLevel + levels) : 0);
+        desc.ArraySize = 6;
+        desc.Format = mTextureFormat;
+        desc.SampleDesc.Count = 1;
+        desc.SampleDesc.Quality = 0;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = getBindFlags();
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = D3D11_RESOURCE_MISC_TEXTURECUBE;
+
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &mTexture);
+
+        if (FAILED(result))
+        {
+            ASSERT(result == E_OUTOFMEMORY);
+            ERR("Creating image failed.");
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else
+        {
+            mTexture->GetDesc(&desc);
+            mMipLevels = desc.MipLevels;
+            mTextureWidth = desc.Width;
+            mTextureHeight = desc.Height;
+            mTextureDepth = 1;
+        }
+    }
+
+    initializeSerials(getLevelCount() * 6, 6);
+}
+
+
+TextureStorage11_Cube::~TextureStorage11_Cube()
+{
+    for (unsigned int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        for (unsigned int face = 0; face < 6; face++)
+        {
+            if (mAssociatedImages[face][level] != NULL)
+            {
+                bool imageAssociationCorrect = mAssociatedImages[face][level]->isAssociatedStorageValid(this);
+                ASSERT(imageAssociationCorrect);
+
+                if (imageAssociationCorrect)
+                {
+                    // We must let the Images recover their data before we delete it from the TextureStorage.
+                    mAssociatedImages[face][level]->recoverFromAssociatedStorage();
+                }
+            }
+        }
+    }
+
+    SafeRelease(mTexture);
+    SafeRelease(mSwizzleTexture);
+
+    for (unsigned int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        SafeRelease(mSwizzleRenderTargets[level]);
+        for (unsigned int face = 0; face < 6; face++)
+        {
+            SafeDelete(mRenderTarget[face][level]);
+        }
+    }
+}
+
+TextureStorage11_Cube *TextureStorage11_Cube::makeTextureStorage11_Cube(TextureStorage *storage)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11_Cube*, storage));
+    return static_cast<TextureStorage11_Cube*>(storage);
+}
+
+void TextureStorage11_Cube::associateImage(Image11* image, int level, int layerTarget)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(0 <= layerTarget && layerTarget < 6);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        if (0 <= layerTarget && layerTarget < 6)
+        {
+            mAssociatedImages[layerTarget][level] = image;
+        }
+    }
+}
+
+bool TextureStorage11_Cube::isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage)
+{
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        if (0 <= layerTarget && layerTarget < 6)
+        {
+            // This validation check should never return false. It means the Image/TextureStorage association is broken.
+            bool retValue = (mAssociatedImages[layerTarget][level] == expectedImage);
+            ASSERT(retValue);
+            return retValue;
+        }
+    }
+
+    return false;
+}
+
+// disassociateImage allows an Image to end its association with a Storage.
+void TextureStorage11_Cube::disassociateImage(int level, int layerTarget, Image11* expectedImage)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(0 <= layerTarget && layerTarget < 6);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        if (0 <= layerTarget && layerTarget < 6)
+        {
+            ASSERT(mAssociatedImages[layerTarget][level] == expectedImage);
+
+            if (mAssociatedImages[layerTarget][level] == expectedImage)
+            {
+                mAssociatedImages[layerTarget][level] = NULL;
+            }
+        }
+    }
+}
+
+// releaseAssociatedImage prepares the Storage for a new Image association. It lets the old Image recover its data before ending the association.
+void TextureStorage11_Cube::releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+    ASSERT(0 <= layerTarget && layerTarget < 6);
+
+    if ((0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS))
+    {
+        if (0 <= layerTarget && layerTarget < 6)
+        {
+            // No need to let the old Image recover its data, if it is also the incoming Image.
+            if (mAssociatedImages[layerTarget][level] != NULL && mAssociatedImages[layerTarget][level] != incomingImage)
+            {
+                // Ensure that the Image is still associated with this TextureStorage. This should be true.
+                bool imageAssociationCorrect = mAssociatedImages[layerTarget][level]->isAssociatedStorageValid(this);
+                ASSERT(imageAssociationCorrect);
+
+                if (imageAssociationCorrect)
+                {
+                    // Force the image to recover from storage before its data is overwritten.
+                    // This will reset mAssociatedImages[level] to NULL too.
+                    mAssociatedImages[layerTarget][level]->recoverFromAssociatedStorage();
+                }
+            }
+        }
+    }
+}
+
+ID3D11Resource *TextureStorage11_Cube::getResource() const
+{
+    return mTexture;
+}
+
+RenderTarget *TextureStorage11_Cube::getRenderTarget(const gl::ImageIndex &index)
+{
+    int faceIndex = index.layerIndex;
+    int level = index.mipIndex;
+
+    if (level >= 0 && level < getLevelCount())
+    {
+        if (!mRenderTarget[faceIndex][level])
+        {
+            ID3D11Device *device = mRenderer->getDevice();
+            HRESULT result;
+
+            D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+            srvDesc.Format = mShaderResourceFormat;
+            srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2DARRAY; // Will be used with Texture2D sampler, not TextureCube
+            srvDesc.Texture2DArray.MostDetailedMip = mTopLevel + level;
+            srvDesc.Texture2DArray.MipLevels = 1;
+            srvDesc.Texture2DArray.FirstArraySlice = faceIndex;
+            srvDesc.Texture2DArray.ArraySize = 1;
+
+            ID3D11ShaderResourceView *srv;
+            result = device->CreateShaderResourceView(mTexture, &srvDesc, &srv);
+
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+            }
+            ASSERT(SUCCEEDED(result));
+
+            if (mRenderTargetFormat != DXGI_FORMAT_UNKNOWN)
+            {
+                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+                rtvDesc.Format = mRenderTargetFormat;
+                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2DARRAY;
+                rtvDesc.Texture2DArray.MipSlice = mTopLevel + level;
+                rtvDesc.Texture2DArray.FirstArraySlice = faceIndex;
+                rtvDesc.Texture2DArray.ArraySize = 1;
+
+                ID3D11RenderTargetView *rtv;
+                result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    SafeRelease(srv);
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mRenderTarget[faceIndex][level] = new RenderTarget11(mRenderer, rtv, mTexture, srv, getLevelWidth(level), getLevelHeight(level), 1);
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(rtv);
+                SafeRelease(srv);
+            }
+            else if (mDepthStencilFormat != DXGI_FORMAT_UNKNOWN)
+            {
+                D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc;
+                dsvDesc.Format = mDepthStencilFormat;
+                dsvDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2DARRAY;
+                dsvDesc.Flags = 0;
+                dsvDesc.Texture2DArray.MipSlice = mTopLevel + level;
+                dsvDesc.Texture2DArray.FirstArraySlice = faceIndex;
+                dsvDesc.Texture2DArray.ArraySize = 1;
+
+                ID3D11DepthStencilView *dsv;
+                result = device->CreateDepthStencilView(mTexture, &dsvDesc, &dsv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    SafeRelease(srv);
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mRenderTarget[faceIndex][level] = new RenderTarget11(mRenderer, dsv, mTexture, srv, getLevelWidth(level), getLevelHeight(level), 1);
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(dsv);
+                SafeRelease(srv);
+            }
+            else
+            {
+                UNREACHABLE();
+            }
+        }
+
+        return mRenderTarget[faceIndex][level];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+ID3D11ShaderResourceView *TextureStorage11_Cube::createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture)
+{
+    D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+    srvDesc.Format = format;
+
+    // Unnormalized integer cube maps are not supported by DX11; we emulate them as an array of six 2D textures
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(format);
+    if (dxgiFormatInfo.componentType == GL_INT || dxgiFormatInfo.componentType == GL_UNSIGNED_INT)
+    {
+        srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2DARRAY;
+        srvDesc.Texture2DArray.MostDetailedMip = mTopLevel + baseLevel;
+        srvDesc.Texture2DArray.MipLevels = 1;
+        srvDesc.Texture2DArray.FirstArraySlice = 0;
+        srvDesc.Texture2DArray.ArraySize = 6;
+    }
+    else
+    {
+        srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURECUBE;
+        srvDesc.TextureCube.MipLevels = mipLevels;
+        srvDesc.TextureCube.MostDetailedMip = mTopLevel + baseLevel;
+    }
+
+    ID3D11ShaderResourceView *SRV = NULL;
+
+    ID3D11Device *device = mRenderer->getDevice();
+    HRESULT result = device->CreateShaderResourceView(texture, &srvDesc, &SRV);
+
+    if (result == E_OUTOFMEMORY)
+    {
+        gl::error(GL_OUT_OF_MEMORY);
+    }
+    ASSERT(SUCCEEDED(result));
+
+    return SRV;
+}
+
+void TextureStorage11_Cube::generateMipmaps()
+{
+    // Base level must already be defined
+
+    for (int faceIndex = 0; faceIndex < 6; faceIndex++)
+    {
+        for (int level = 1; level < getLevelCount(); level++)
+        {
+            invalidateSwizzleCacheLevel(level);
+
+            gl::ImageIndex srcIndex = gl::ImageIndex::MakeCube(GL_TEXTURE_CUBE_MAP_POSITIVE_X + faceIndex, level - 1);
+            gl::ImageIndex destIndex = gl::ImageIndex::MakeCube(GL_TEXTURE_CUBE_MAP_POSITIVE_X + faceIndex, level);
+
+            RenderTarget11 *source = RenderTarget11::makeRenderTarget11(getRenderTarget(srcIndex));
+            RenderTarget11 *dest = RenderTarget11::makeRenderTarget11(getRenderTarget(destIndex));
+
+            generateMipmapLayer(source, dest);
+        }
+    }
+}
+
+ID3D11Resource *TextureStorage11_Cube::getSwizzleTexture()
+{
+    if (!mSwizzleTexture)
+    {
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE2D_DESC desc;
+        desc.Width = mTextureWidth;
+        desc.Height = mTextureHeight;
+        desc.MipLevels = mMipLevels;
+        desc.ArraySize = 6;
+        desc.Format = mSwizzleTextureFormat;
+        desc.SampleDesc.Count = 1;
+        desc.SampleDesc.Quality = 0;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = D3D11_BIND_SHADER_RESOURCE | D3D11_BIND_RENDER_TARGET;
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = D3D11_RESOURCE_MISC_TEXTURECUBE;
+
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &mSwizzleTexture);
+
+        if (result == E_OUTOFMEMORY)
+        {
+            return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11Texture2D*>(NULL));
+        }
+        ASSERT(SUCCEEDED(result));
+    }
+
+    return mSwizzleTexture;
+}
+
+ID3D11RenderTargetView *TextureStorage11_Cube::getSwizzleRenderTarget(int mipLevel)
+{
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        if (!mSwizzleRenderTargets[mipLevel])
+        {
+            ID3D11Resource *swizzleTexture = getSwizzleTexture();
+            if (!swizzleTexture)
+            {
+                return NULL;
+            }
+
+            ID3D11Device *device = mRenderer->getDevice();
+
+            D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+            rtvDesc.Format = mSwizzleRenderTargetFormat;
+            rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2DARRAY;
+            rtvDesc.Texture2DArray.MipSlice = mTopLevel + mipLevel;
+            rtvDesc.Texture2DArray.FirstArraySlice = 0;
+            rtvDesc.Texture2DArray.ArraySize = 6;
+
+            HRESULT result = device->CreateRenderTargetView(mSwizzleTexture, &rtvDesc, &mSwizzleRenderTargets[mipLevel]);
+
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11RenderTargetView*>(NULL));
+            }
+            ASSERT(SUCCEEDED(result));
+        }
+
+        return mSwizzleRenderTargets[mipLevel];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+TextureStorage11_3D::TextureStorage11_3D(Renderer *renderer, GLenum internalformat, bool renderTarget,
+                                         GLsizei width, GLsizei height, GLsizei depth, int levels)
+    : TextureStorage11(renderer, GetTextureBindFlags(internalformat, renderTarget))
+{
+    mTexture = NULL;
+    mSwizzleTexture = NULL;
+
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        mAssociatedImages[i] = NULL;
+        mLevelRenderTargets[i] = NULL;
+        mSwizzleRenderTargets[i] = NULL;
+    }
+
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalformat);
+    mTextureFormat = formatInfo.texFormat;
+    mShaderResourceFormat = formatInfo.srvFormat;
+    mDepthStencilFormat = formatInfo.dsvFormat;
+    mRenderTargetFormat = formatInfo.rtvFormat;
+    mSwizzleTextureFormat = formatInfo.swizzleTexFormat;
+    mSwizzleShaderResourceFormat = formatInfo.swizzleSRVFormat;
+    mSwizzleRenderTargetFormat = formatInfo.swizzleRTVFormat;
+
+    // If the width, height or depth are not positive this should be treated as an incomplete texture
+    // we handle that here by skipping the d3d texture creation
+    if (width > 0 && height > 0 && depth > 0)
+    {
+        // adjust size if needed for compressed textures
+        d3d11::MakeValidSize(false, mTextureFormat, &width, &height, &mTopLevel);
+
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE3D_DESC desc;
+        desc.Width = width;
+        desc.Height = height;
+        desc.Depth = depth;
+        desc.MipLevels = ((levels > 0) ? (mTopLevel + levels) : 0);
+        desc.Format = mTextureFormat;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = getBindFlags();
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = 0;
+
+        HRESULT result = device->CreateTexture3D(&desc, NULL, &mTexture);
+
+        // this can happen from windows TDR
+        if (d3d11::isDeviceLostError(result))
+        {
+            mRenderer->notifyDeviceLost();
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else if (FAILED(result))
+        {
+            ASSERT(result == E_OUTOFMEMORY);
+            ERR("Creating image failed.");
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else
+        {
+            mTexture->GetDesc(&desc);
+            mMipLevels = desc.MipLevels;
+            mTextureWidth = desc.Width;
+            mTextureHeight = desc.Height;
+            mTextureDepth = desc.Depth;
+        }
+    }
+
+    initializeSerials(getLevelCount() * depth, depth);
+}
+
+TextureStorage11_3D::~TextureStorage11_3D()
+{
+    for (unsigned i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        if (mAssociatedImages[i] != NULL)
+        {
+            bool imageAssociationCorrect = mAssociatedImages[i]->isAssociatedStorageValid(this);
+            ASSERT(imageAssociationCorrect);
+
+            if (imageAssociationCorrect)
+            {
+                // We must let the Images recover their data before we delete it from the TextureStorage.
+                mAssociatedImages[i]->recoverFromAssociatedStorage();
+            }
+        }
+    }
+
+    SafeRelease(mTexture);
+    SafeRelease(mSwizzleTexture);
+
+    for (RenderTargetMap::iterator i = mLevelLayerRenderTargets.begin(); i != mLevelLayerRenderTargets.end(); i++)
+    {
+        SafeDelete(i->second);
+    }
+    mLevelLayerRenderTargets.clear();
+
+    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
+    {
+        SafeDelete(mLevelRenderTargets[i]);
+        SafeRelease(mSwizzleRenderTargets[i]);
+    }
+}
+
+TextureStorage11_3D *TextureStorage11_3D::makeTextureStorage11_3D(TextureStorage *storage)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11_3D*, storage));
+    return static_cast<TextureStorage11_3D*>(storage);
+}
+
+void TextureStorage11_3D::associateImage(Image11* image, int level, int layerTarget)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        mAssociatedImages[level] = image;
+    }
+}
+
+bool TextureStorage11_3D::isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage)
+{
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        // This validation check should never return false. It means the Image/TextureStorage association is broken.
+        bool retValue = (mAssociatedImages[level] == expectedImage);
+        ASSERT(retValue);
+        return retValue;
+    }
+
+    return false;
+}
+
+// disassociateImage allows an Image to end its association with a Storage.
+void TextureStorage11_3D::disassociateImage(int level, int layerTarget, Image11* expectedImage)
+{
+    ASSERT(0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS);
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        ASSERT(mAssociatedImages[level] == expectedImage);
+
+        if (mAssociatedImages[level] == expectedImage)
+        {
+            mAssociatedImages[level] = NULL;
+        }
+    }
+}
+
+// releaseAssociatedImage prepares the Storage for a new Image association. It lets the old Image recover its data before ending the association.
+void TextureStorage11_3D::releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage)
+{
+    ASSERT((0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS));
+
+    if (0 <= level && level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS)
+    {
+        // No need to let the old Image recover its data, if it is also the incoming Image.
+        if (mAssociatedImages[level] != NULL && mAssociatedImages[level] != incomingImage)
+        {
+            // Ensure that the Image is still associated with this TextureStorage. This should be true.
+            bool imageAssociationCorrect = mAssociatedImages[level]->isAssociatedStorageValid(this);
+            ASSERT(imageAssociationCorrect);
+
+            if (imageAssociationCorrect)
+            {
+                // Force the image to recover from storage before its data is overwritten.
+                // This will reset mAssociatedImages[level] to NULL too.
+                mAssociatedImages[level]->recoverFromAssociatedStorage();
+            }
+        }
+    }
+}
+
+ID3D11Resource *TextureStorage11_3D::getResource() const
+{
+    return mTexture;
+}
+
+ID3D11ShaderResourceView *TextureStorage11_3D::createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture)
+{
+    D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+    srvDesc.Format = format;
+    srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE3D;
+    srvDesc.Texture3D.MostDetailedMip = baseLevel;
+    srvDesc.Texture3D.MipLevels = mipLevels;
+
+    ID3D11ShaderResourceView *SRV = NULL;
+
+    ID3D11Device *device = mRenderer->getDevice();
+    HRESULT result = device->CreateShaderResourceView(texture, &srvDesc, &SRV);
+
+    if (result == E_OUTOFMEMORY)
+    {
+        gl::error(GL_OUT_OF_MEMORY);
+    }
+    ASSERT(SUCCEEDED(result));
+
+    return SRV;
+}
+
+RenderTarget *TextureStorage11_3D::getRenderTarget(const gl::ImageIndex &index)
+{
+    int mipLevel = index.mipIndex;
+
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        ASSERT(mRenderTargetFormat != DXGI_FORMAT_UNKNOWN);
+
+        if (!index.hasLayer())
+        {
+            if (!mLevelRenderTargets[mipLevel])
+            {
+                ID3D11ShaderResourceView *srv = getSRVLevel(mipLevel);
+                if (!srv)
+                {
+                    return NULL;
+                }
+
+                ID3D11Device *device = mRenderer->getDevice();
+
+                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+                rtvDesc.Format = mRenderTargetFormat;
+                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE3D;
+                rtvDesc.Texture3D.MipSlice = mTopLevel + mipLevel;
+                rtvDesc.Texture3D.FirstWSlice = 0;
+                rtvDesc.Texture3D.WSize = -1;
+
+                ID3D11RenderTargetView *rtv;
+                HRESULT result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    SafeRelease(srv);
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mLevelRenderTargets[mipLevel] = new RenderTarget11(mRenderer, rtv, mTexture, srv, getLevelWidth(mipLevel), getLevelHeight(mipLevel), getLevelDepth(mipLevel));
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(rtv);
+            }
+
+            return mLevelRenderTargets[mipLevel];
+        }
+        else
+        {
+            int layer = index.layerIndex;
+
+            LevelLayerKey key(mipLevel, layer);
+            if (mLevelLayerRenderTargets.find(key) == mLevelLayerRenderTargets.end())
+            {
+                ID3D11Device *device = mRenderer->getDevice();
+                HRESULT result;
+
+                // TODO, what kind of SRV is expected here?
+                ID3D11ShaderResourceView *srv = NULL;
+
+                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+                rtvDesc.Format = mRenderTargetFormat;
+                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE3D;
+                rtvDesc.Texture3D.MipSlice = mTopLevel + mipLevel;
+                rtvDesc.Texture3D.FirstWSlice = layer;
+                rtvDesc.Texture3D.WSize = 1;
+
+                ID3D11RenderTargetView *rtv;
+                result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    SafeRelease(srv);
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mLevelLayerRenderTargets[key] = new RenderTarget11(mRenderer, rtv, mTexture, srv, getLevelWidth(mipLevel), getLevelHeight(mipLevel), 1);
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(rtv);
+                SafeRelease(srv);
+            }
+
+            return mLevelLayerRenderTargets[key];
+        }
+    }
+
+    return NULL;
+}
+
+void TextureStorage11_3D::generateMipmaps()
+{
+    // Base level must already be defined
+
+    for (int level = 1; level < getLevelCount(); level++)
+    {
+        invalidateSwizzleCacheLevel(level);
+
+        gl::ImageIndex srcIndex = gl::ImageIndex::Make3D(level - 1);
+        gl::ImageIndex destIndex = gl::ImageIndex::Make3D(level);
+
+        RenderTarget11 *source = RenderTarget11::makeRenderTarget11(getRenderTarget(srcIndex));
+        RenderTarget11 *dest = RenderTarget11::makeRenderTarget11(getRenderTarget(destIndex));
+
+        generateMipmapLayer(source, dest);
+    }
+}
+
+ID3D11Resource *TextureStorage11_3D::getSwizzleTexture()
+{
+    if (!mSwizzleTexture)
+    {
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE3D_DESC desc;
+        desc.Width = mTextureWidth;
+        desc.Height = mTextureHeight;
+        desc.Depth = mTextureDepth;
+        desc.MipLevels = mMipLevels;
+        desc.Format = mSwizzleTextureFormat;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = D3D11_BIND_SHADER_RESOURCE | D3D11_BIND_RENDER_TARGET;
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = 0;
+
+        HRESULT result = device->CreateTexture3D(&desc, NULL, &mSwizzleTexture);
+
+        if (result == E_OUTOFMEMORY)
+        {
+            return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11Texture3D*>(NULL));
+        }
+        ASSERT(SUCCEEDED(result));
+    }
+
+    return mSwizzleTexture;
+}
+
+ID3D11RenderTargetView *TextureStorage11_3D::getSwizzleRenderTarget(int mipLevel)
+{
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        if (!mSwizzleRenderTargets[mipLevel])
+        {
+            ID3D11Resource *swizzleTexture = getSwizzleTexture();
+            if (!swizzleTexture)
+            {
+                return NULL;
+            }
+
+            ID3D11Device *device = mRenderer->getDevice();
+
+            D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+            rtvDesc.Format = mSwizzleRenderTargetFormat;
+            rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE3D;
+            rtvDesc.Texture3D.MipSlice = mTopLevel + mipLevel;
+            rtvDesc.Texture3D.FirstWSlice = 0;
+            rtvDesc.Texture3D.WSize = -1;
+
+            HRESULT result = device->CreateRenderTargetView(mSwizzleTexture, &rtvDesc, &mSwizzleRenderTargets[mipLevel]);
+
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11RenderTargetView*>(NULL));
+            }
+            ASSERT(SUCCEEDED(result));
+        }
+
+        return mSwizzleRenderTargets[mipLevel];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+TextureStorage11_2DArray::TextureStorage11_2DArray(Renderer *renderer, GLenum internalformat, bool renderTarget,
+                                                   GLsizei width, GLsizei height, GLsizei depth, int levels)
+    : TextureStorage11(renderer, GetTextureBindFlags(internalformat, renderTarget))
+{
+    mTexture = NULL;
+    mSwizzleTexture = NULL;
+
+    for (unsigned int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        mSwizzleRenderTargets[level] = NULL;
+    }
+
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalformat);
+    mTextureFormat = formatInfo.texFormat;
+    mShaderResourceFormat = formatInfo.srvFormat;
+    mDepthStencilFormat = formatInfo.dsvFormat;
+    mRenderTargetFormat = formatInfo.rtvFormat;
+    mSwizzleTextureFormat = formatInfo.swizzleTexFormat;
+    mSwizzleShaderResourceFormat = formatInfo.swizzleSRVFormat;
+    mSwizzleRenderTargetFormat = formatInfo.swizzleRTVFormat;
+
+    // if the width, height or depth is not positive this should be treated as an incomplete texture
+    // we handle that here by skipping the d3d texture creation
+    if (width > 0 && height > 0 && depth > 0)
+    {
+        // adjust size if needed for compressed textures
+        d3d11::MakeValidSize(false, mTextureFormat, &width, &height, &mTopLevel);
+
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE2D_DESC desc;
+        desc.Width = width;
+        desc.Height = height;
+        desc.MipLevels = ((levels > 0) ? (mTopLevel + levels) : 0);
+        desc.ArraySize = depth;
+        desc.Format = mTextureFormat;
+        desc.SampleDesc.Count = 1;
+        desc.SampleDesc.Quality = 0;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = getBindFlags();
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = 0;
+
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &mTexture);
+
+        // this can happen from windows TDR
+        if (d3d11::isDeviceLostError(result))
+        {
+            mRenderer->notifyDeviceLost();
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else if (FAILED(result))
+        {
+            ASSERT(result == E_OUTOFMEMORY);
+            ERR("Creating image failed.");
+            gl::error(GL_OUT_OF_MEMORY);
+        }
+        else
+        {
+            mTexture->GetDesc(&desc);
+            mMipLevels = desc.MipLevels;
+            mTextureWidth = desc.Width;
+            mTextureHeight = desc.Height;
+            mTextureDepth = desc.ArraySize;
+        }
+    }
+
+    initializeSerials(getLevelCount() * depth, depth);
+}
+
+TextureStorage11_2DArray::~TextureStorage11_2DArray()
+{
+    for (ImageMap::iterator i = mAssociatedImages.begin(); i != mAssociatedImages.end(); i++)
+    {
+        bool imageAssociationCorrect = i->second->isAssociatedStorageValid(this);
+        ASSERT(imageAssociationCorrect);
+
+        if (imageAssociationCorrect)
+        {
+            // We must let the Images recover their data before we delete it from the TextureStorage.
+            i->second->recoverFromAssociatedStorage();
+        }
+    }
+    mAssociatedImages.clear();
+
+    SafeRelease(mTexture);
+    SafeRelease(mSwizzleTexture);
+
+    for (unsigned int level = 0; level < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; level++)
+    {
+        SafeRelease(mSwizzleRenderTargets[level]);
+    }
+
+    for (RenderTargetMap::iterator i = mRenderTargets.begin(); i != mRenderTargets.end(); i++)
+    {
+        SafeDelete(i->second);
+    }
+    mRenderTargets.clear();
+}
+
+TextureStorage11_2DArray *TextureStorage11_2DArray::makeTextureStorage11_2DArray(TextureStorage *storage)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11_2DArray*, storage));
+    return static_cast<TextureStorage11_2DArray*>(storage);
+}
+
+void TextureStorage11_2DArray::associateImage(Image11* image, int level, int layerTarget)
+{
+    ASSERT(0 <= level && level < getLevelCount());
+
+    if (0 <= level && level < getLevelCount())
+    {
+        LevelLayerKey key(level, layerTarget);
+        mAssociatedImages[key] = image;
+    }
+}
+
+bool TextureStorage11_2DArray::isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage)
+{
+    LevelLayerKey key(level, layerTarget);
+
+    // This validation check should never return false. It means the Image/TextureStorage association is broken.
+    bool retValue = (mAssociatedImages.find(key) != mAssociatedImages.end() && (mAssociatedImages[key] == expectedImage));
+    ASSERT(retValue);
+    return retValue;
+}
+
+// disassociateImage allows an Image to end its association with a Storage.
+void TextureStorage11_2DArray::disassociateImage(int level, int layerTarget, Image11* expectedImage)
+{
+    LevelLayerKey key(level, layerTarget);
+
+    bool imageAssociationCorrect = (mAssociatedImages.find(key) != mAssociatedImages.end() && (mAssociatedImages[key] == expectedImage));
+    ASSERT(imageAssociationCorrect);
+
+    if (imageAssociationCorrect)
+    {
+        mAssociatedImages[key] = NULL;
+    }
+}
+
+// releaseAssociatedImage prepares the Storage for a new Image association. It lets the old Image recover its data before ending the association.
+void TextureStorage11_2DArray::releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage)
+{
+    LevelLayerKey key(level, layerTarget);
+
+    ASSERT(mAssociatedImages.find(key) != mAssociatedImages.end());
+
+    if (mAssociatedImages.find(key) != mAssociatedImages.end())
+    {
+        if (mAssociatedImages[key] != NULL && mAssociatedImages[key] != incomingImage)
+        {
+            // Ensure that the Image is still associated with this TextureStorage. This should be true.
+            bool imageAssociationCorrect = mAssociatedImages[key]->isAssociatedStorageValid(this);
+            ASSERT(imageAssociationCorrect);
+
+            if (imageAssociationCorrect)
+            {
+                // Force the image to recover from storage before its data is overwritten.
+                // This will reset mAssociatedImages[level] to NULL too.
+                mAssociatedImages[key]->recoverFromAssociatedStorage();
+            }
+        }
+    }
+}
+
+ID3D11Resource *TextureStorage11_2DArray::getResource() const
+{
+    return mTexture;
+}
+
+ID3D11ShaderResourceView *TextureStorage11_2DArray::createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture)
+{
+    D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+    srvDesc.Format = format;
+    srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2DARRAY;
+    srvDesc.Texture2DArray.MostDetailedMip = mTopLevel + baseLevel;
+    srvDesc.Texture2DArray.MipLevels = mipLevels;
+    srvDesc.Texture2DArray.FirstArraySlice = 0;
+    srvDesc.Texture2DArray.ArraySize = mTextureDepth;
+
+    ID3D11ShaderResourceView *SRV = NULL;
+
+    ID3D11Device *device = mRenderer->getDevice();
+    HRESULT result = device->CreateShaderResourceView(texture, &srvDesc, &SRV);
+
+    if (result == E_OUTOFMEMORY)
+    {
+        gl::error(GL_OUT_OF_MEMORY);
+    }
+    ASSERT(SUCCEEDED(result));
+
+    return SRV;
+}
+
+RenderTarget *TextureStorage11_2DArray::getRenderTarget(const gl::ImageIndex &index)
+{
+    ASSERT(index.hasLayer());
+
+    int mipLevel = index.mipIndex;
+    int layer = index.layerIndex;
+
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        LevelLayerKey key(mipLevel, layer);
+        if (mRenderTargets.find(key) == mRenderTargets.end())
+        {
+            ID3D11Device *device = mRenderer->getDevice();
+            HRESULT result;
+
+            D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
+            srvDesc.Format = mShaderResourceFormat;
+            srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2DARRAY;
+            srvDesc.Texture2DArray.MostDetailedMip = mTopLevel + mipLevel;
+            srvDesc.Texture2DArray.MipLevels = 1;
+            srvDesc.Texture2DArray.FirstArraySlice = layer;
+            srvDesc.Texture2DArray.ArraySize = 1;
+
+            ID3D11ShaderResourceView *srv;
+            result = device->CreateShaderResourceView(mTexture, &srvDesc, &srv);
+
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+            }
+            ASSERT(SUCCEEDED(result));
+
+            if (mRenderTargetFormat != DXGI_FORMAT_UNKNOWN)
+            {
+                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+                rtvDesc.Format = mRenderTargetFormat;
+                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2DARRAY;
+                rtvDesc.Texture2DArray.MipSlice = mTopLevel + mipLevel;
+                rtvDesc.Texture2DArray.FirstArraySlice = layer;
+                rtvDesc.Texture2DArray.ArraySize = 1;
+
+                ID3D11RenderTargetView *rtv;
+                result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
+
+                if (result == E_OUTOFMEMORY)
+                {
+                    SafeRelease(srv);
+                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
+                }
+                ASSERT(SUCCEEDED(result));
+
+                mRenderTargets[key] = new RenderTarget11(mRenderer, rtv, mTexture, srv, getLevelWidth(mipLevel), getLevelHeight(mipLevel), 1);
+
+                // RenderTarget will take ownership of these resources
+                SafeRelease(rtv);
+                SafeRelease(srv);
+            }
+            else
+            {
+                UNREACHABLE();
+            }
+        }
+
+        return mRenderTargets[key];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+void TextureStorage11_2DArray::generateMipmaps()
+{
+    // Base level must already be defined
+
+    for (int level = 0; level < getLevelCount(); level++)
+    {
+        invalidateSwizzleCacheLevel(level);
+        for (unsigned int layer = 0; layer < mTextureDepth; layer++)
+        {
+            gl::ImageIndex sourceIndex = gl::ImageIndex::Make2DArray(level - 1, layer);
+            gl::ImageIndex destIndex = gl::ImageIndex::Make2DArray(level, layer);
+
+            RenderTarget11 *source = RenderTarget11::makeRenderTarget11(getRenderTarget(sourceIndex));
+            RenderTarget11 *dest = RenderTarget11::makeRenderTarget11(getRenderTarget(destIndex));
+
+            generateMipmapLayer(source, dest);
+        }
+    }
+}
+
+ID3D11Resource *TextureStorage11_2DArray::getSwizzleTexture()
+{
+    if (!mSwizzleTexture)
+    {
+        ID3D11Device *device = mRenderer->getDevice();
+
+        D3D11_TEXTURE2D_DESC desc;
+        desc.Width = mTextureWidth;
+        desc.Height = mTextureHeight;
+        desc.MipLevels = mMipLevels;
+        desc.ArraySize = mTextureDepth;
+        desc.Format = mSwizzleTextureFormat;
+        desc.SampleDesc.Count = 1;
+        desc.SampleDesc.Quality = 0;
+        desc.Usage = D3D11_USAGE_DEFAULT;
+        desc.BindFlags = D3D11_BIND_SHADER_RESOURCE | D3D11_BIND_RENDER_TARGET;
+        desc.CPUAccessFlags = 0;
+        desc.MiscFlags = 0;
+
+        HRESULT result = device->CreateTexture2D(&desc, NULL, &mSwizzleTexture);
+
+        if (result == E_OUTOFMEMORY)
+        {
+            return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11Texture2D*>(NULL));
+        }
+        ASSERT(SUCCEEDED(result));
+    }
+
+    return mSwizzleTexture;
+}
+
+ID3D11RenderTargetView *TextureStorage11_2DArray::getSwizzleRenderTarget(int mipLevel)
+{
+    if (mipLevel >= 0 && mipLevel < getLevelCount())
+    {
+        if (!mSwizzleRenderTargets[mipLevel])
+        {
+            ID3D11Resource *swizzleTexture = getSwizzleTexture();
+            if (!swizzleTexture)
+            {
+                return NULL;
+            }
+
+            ID3D11Device *device = mRenderer->getDevice();
+
+            D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
+            rtvDesc.Format = mSwizzleRenderTargetFormat;
+            rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2DARRAY;
+            rtvDesc.Texture2DArray.MipSlice = mTopLevel + mipLevel;
+            rtvDesc.Texture2DArray.FirstArraySlice = 0;
+            rtvDesc.Texture2DArray.ArraySize = mTextureDepth;
+
+            HRESULT result = device->CreateRenderTargetView(mSwizzleTexture, &rtvDesc, &mSwizzleRenderTargets[mipLevel]);
+
+            if (result == E_OUTOFMEMORY)
+            {
+                return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11RenderTargetView*>(NULL));
+            }
+            ASSERT(SUCCEEDED(result));
+        }
+
+        return mSwizzleRenderTargets[mipLevel];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.h
new file mode 100644
index 0000000000..9d63b2699d
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.h
@@ -0,0 +1,313 @@
+//
+// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// TextureStorage11.h: Defines the abstract rx::TextureStorage11 class and its concrete derived
+// classes TextureStorage11_2D and TextureStorage11_Cube, which act as the interface to the D3D11 texture.
+
+#ifndef LIBGLESV2_RENDERER_TEXTURESTORAGE11_H_
+#define LIBGLESV2_RENDERER_TEXTURESTORAGE11_H_
+
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/Error.h"
+#include "libGLESv2/renderer/d3d/TextureStorage.h"
+
+#include <map>
+
+namespace gl
+{
+struct ImageIndex;
+}
+
+namespace rx
+{
+class RenderTarget;
+class RenderTarget11;
+class Renderer;
+class Renderer11;
+class SwapChain11;
+class Image11;
+
+class TextureStorage11 : public TextureStorage
+{
+  public:
+    virtual ~TextureStorage11();
+
+    static TextureStorage11 *makeTextureStorage11(TextureStorage *storage);
+
+    static DWORD GetTextureBindFlags(GLenum internalFormat, bool renderTarget);
+
+    UINT getBindFlags() const;
+
+    virtual ID3D11Resource *getResource() const = 0;
+    virtual ID3D11ShaderResourceView *getSRV(const gl::SamplerState &samplerState);
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index) = 0;
+
+    virtual void generateMipmaps() = 0;
+
+    virtual int getTopLevel() const;
+    virtual bool isRenderTarget() const;
+    virtual bool isManaged() const;
+    virtual int getLevelCount() const;
+    UINT getSubresourceIndex(int mipLevel, int layerTarget) const;
+
+    gl::Error generateSwizzles(GLenum swizzleRed, GLenum swizzleGreen, GLenum swizzleBlue, GLenum swizzleAlpha);
+    void invalidateSwizzleCacheLevel(int mipLevel);
+    void invalidateSwizzleCache();
+
+    bool updateSubresourceLevel(ID3D11Resource *texture, unsigned int sourceSubresource, int level,
+                                int layerTarget, GLint xoffset, GLint yoffset, GLint zoffset,
+                                GLsizei width, GLsizei height, GLsizei depth);
+
+    bool copySubresourceLevel(ID3D11Resource* dstTexture, unsigned int dstSubresource, int level,
+                              int layerTarget, GLint xoffset, GLint yoffset, GLint zoffset,
+                              GLsizei width, GLsizei height, GLsizei depth);
+
+    virtual void associateImage(Image11* image, int level, int layerTarget) = 0;
+    virtual void disassociateImage(int level, int layerTarget, Image11* expectedImage) = 0;
+    virtual bool isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage) = 0;
+    virtual void releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage) = 0;
+
+  protected:
+    TextureStorage11(Renderer *renderer, UINT bindFlags);
+    void generateMipmapLayer(RenderTarget11 *source, RenderTarget11 *dest);
+    int getLevelWidth(int mipLevel) const;
+    int getLevelHeight(int mipLevel) const;
+    int getLevelDepth(int mipLevel) const;
+
+    virtual ID3D11Resource *getSwizzleTexture() = 0;
+    virtual ID3D11RenderTargetView *getSwizzleRenderTarget(int mipLevel) = 0;
+    ID3D11ShaderResourceView *getSRVLevel(int mipLevel);
+
+    virtual ID3D11ShaderResourceView *createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture) = 0;
+
+    void verifySwizzleExists(GLenum swizzleRed, GLenum swizzleGreen, GLenum swizzleBlue, GLenum swizzleAlpha);
+
+    Renderer11 *mRenderer;
+    int mTopLevel;
+    unsigned int mMipLevels;
+
+    DXGI_FORMAT mTextureFormat;
+    DXGI_FORMAT mShaderResourceFormat;
+    DXGI_FORMAT mRenderTargetFormat;
+    DXGI_FORMAT mDepthStencilFormat;
+    DXGI_FORMAT mSwizzleTextureFormat;
+    DXGI_FORMAT mSwizzleShaderResourceFormat;
+    DXGI_FORMAT mSwizzleRenderTargetFormat;
+    unsigned int mTextureWidth;
+    unsigned int mTextureHeight;
+    unsigned int mTextureDepth;
+
+    struct SwizzleCacheValue
+    {
+        GLenum swizzleRed;
+        GLenum swizzleGreen;
+        GLenum swizzleBlue;
+        GLenum swizzleAlpha;
+
+        SwizzleCacheValue();
+        SwizzleCacheValue(GLenum red, GLenum green, GLenum blue, GLenum alpha);
+
+        bool operator ==(const SwizzleCacheValue &other) const;
+        bool operator !=(const SwizzleCacheValue &other) const;
+    };
+    SwizzleCacheValue mSwizzleCache[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    struct SRVKey
+    {
+        SRVKey(int baseLevel = 0, int mipLevels = 0, bool swizzle = false);
+
+        bool operator==(const SRVKey &rhs) const;
+
+        int baseLevel;
+        int mipLevels;
+        bool swizzle;
+    };
+
+    struct SRVPair
+    {
+        SRVKey key;
+        ID3D11ShaderResourceView *srv;
+    };
+
+    struct SRVCache
+    {
+        ~SRVCache();
+
+        ID3D11ShaderResourceView *find(const SRVKey &key) const;
+        ID3D11ShaderResourceView *add(const SRVKey &key, ID3D11ShaderResourceView *srv);
+
+        std::vector<SRVPair> cache;
+    };
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureStorage11);
+
+    const UINT mBindFlags;
+
+    SRVCache srvCache;
+    ID3D11ShaderResourceView *mLevelSRVs[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+};
+
+class TextureStorage11_2D : public TextureStorage11
+{
+  public:
+    TextureStorage11_2D(Renderer *renderer, SwapChain11 *swapchain);
+    TextureStorage11_2D(Renderer *renderer, GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels);
+    virtual ~TextureStorage11_2D();
+
+    static TextureStorage11_2D *makeTextureStorage11_2D(TextureStorage *storage);
+
+    virtual ID3D11Resource *getResource() const;
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+
+    virtual void generateMipmaps();
+
+    virtual void associateImage(Image11* image, int level, int layerTarget);
+    virtual void disassociateImage(int level, int layerTarget, Image11* expectedImage);
+    virtual bool isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage);
+    virtual void releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage);
+
+  protected:
+    virtual ID3D11Resource *getSwizzleTexture();
+    virtual ID3D11RenderTargetView *getSwizzleRenderTarget(int mipLevel);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureStorage11_2D);
+
+    virtual ID3D11ShaderResourceView *createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture);
+
+    ID3D11Texture2D *mTexture;
+    RenderTarget11 *mRenderTarget[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    ID3D11Texture2D *mSwizzleTexture;
+    ID3D11RenderTargetView *mSwizzleRenderTargets[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    Image11 *mAssociatedImages[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+};
+
+class TextureStorage11_Cube : public TextureStorage11
+{
+  public:
+    TextureStorage11_Cube(Renderer *renderer, GLenum internalformat, bool renderTarget, int size, int levels);
+    virtual ~TextureStorage11_Cube();
+
+    static TextureStorage11_Cube *makeTextureStorage11_Cube(TextureStorage *storage);
+
+    virtual ID3D11Resource *getResource() const;
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+
+    virtual void generateMipmaps();
+
+    virtual void associateImage(Image11* image, int level, int layerTarget);
+    virtual void disassociateImage(int level, int layerTarget, Image11* expectedImage);
+    virtual bool isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage);
+    virtual void releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage);
+
+  protected:
+    virtual ID3D11Resource *getSwizzleTexture();
+    virtual ID3D11RenderTargetView *getSwizzleRenderTarget(int mipLevel);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureStorage11_Cube);
+
+    virtual ID3D11ShaderResourceView *createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture);
+
+    ID3D11Texture2D *mTexture;
+    RenderTarget11 *mRenderTarget[6][gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    ID3D11Texture2D *mSwizzleTexture;
+    ID3D11RenderTargetView *mSwizzleRenderTargets[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    Image11 *mAssociatedImages[6][gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+};
+
+class TextureStorage11_3D : public TextureStorage11
+{
+  public:
+    TextureStorage11_3D(Renderer *renderer, GLenum internalformat, bool renderTarget,
+                        GLsizei width, GLsizei height, GLsizei depth, int levels);
+    virtual ~TextureStorage11_3D();
+
+    static TextureStorage11_3D *makeTextureStorage11_3D(TextureStorage *storage);
+
+    virtual ID3D11Resource *getResource() const;
+
+    // Handles both layer and non-layer RTs
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+
+    virtual void generateMipmaps();
+
+    virtual void associateImage(Image11* image, int level, int layerTarget);
+    virtual void disassociateImage(int level, int layerTarget, Image11* expectedImage);
+    virtual bool isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage);
+    virtual void releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage);
+
+  protected:
+    virtual ID3D11Resource *getSwizzleTexture();
+    virtual ID3D11RenderTargetView *getSwizzleRenderTarget(int mipLevel);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureStorage11_3D);
+
+    virtual ID3D11ShaderResourceView *createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture);
+
+    typedef std::pair<int, int> LevelLayerKey;
+    typedef std::map<LevelLayerKey, RenderTarget11*> RenderTargetMap;
+    RenderTargetMap mLevelLayerRenderTargets;
+
+    RenderTarget11 *mLevelRenderTargets[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    ID3D11Texture3D *mTexture;
+    ID3D11Texture3D *mSwizzleTexture;
+    ID3D11RenderTargetView *mSwizzleRenderTargets[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    Image11 *mAssociatedImages[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+};
+
+class TextureStorage11_2DArray : public TextureStorage11
+{
+  public:
+    TextureStorage11_2DArray(Renderer *renderer, GLenum internalformat, bool renderTarget,
+                             GLsizei width, GLsizei height, GLsizei depth, int levels);
+    virtual ~TextureStorage11_2DArray();
+
+    static TextureStorage11_2DArray *makeTextureStorage11_2DArray(TextureStorage *storage);
+
+    virtual ID3D11Resource *getResource() const;
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
+
+    virtual void generateMipmaps();
+
+    virtual void associateImage(Image11* image, int level, int layerTarget);
+    virtual void disassociateImage(int level, int layerTarget, Image11* expectedImage);
+    virtual bool isAssociatedImageValid(int level, int layerTarget, Image11* expectedImage);
+    virtual void releaseAssociatedImage(int level, int layerTarget, Image11* incomingImage);
+
+  protected:
+    virtual ID3D11Resource *getSwizzleTexture();
+    virtual ID3D11RenderTargetView *getSwizzleRenderTarget(int mipLevel);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(TextureStorage11_2DArray);
+
+    virtual ID3D11ShaderResourceView *createSRV(int baseLevel, int mipLevels, DXGI_FORMAT format, ID3D11Resource *texture);
+
+    typedef std::pair<int, int> LevelLayerKey;
+    typedef std::map<LevelLayerKey, RenderTarget11*> RenderTargetMap;
+    RenderTargetMap mRenderTargets;
+
+    ID3D11Texture2D *mTexture;
+
+    ID3D11Texture2D *mSwizzleTexture;
+    ID3D11RenderTargetView *mSwizzleRenderTargets[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
+
+    typedef std::map<LevelLayerKey, Image11*> ImageMap;
+    ImageMap mAssociatedImages;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_TEXTURESTORAGE11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexArray11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexArray11.h
new file mode 100644
index 0000000000..590cb9f05a
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexArray11.h
@@ -0,0 +1,42 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexArray11.h: Defines the rx::VertexArray11 class which implements rx::VertexArrayImpl.
+
+#ifndef LIBGLESV2_RENDERER_VERTEXARRAY11_H_
+#define LIBGLESV2_RENDERER_VERTEXARRAY11_H_
+
+#include "libGLESv2/renderer/VertexArrayImpl.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+
+namespace rx
+{
+class Renderer11;
+
+class VertexArray11 : public VertexArrayImpl
+{
+  public:
+    VertexArray11(rx::Renderer11 *renderer)
+        : VertexArrayImpl(),
+          mRenderer(renderer)
+    {
+    }
+    virtual ~VertexArray11() { }
+
+    virtual void setElementArrayBuffer(const gl::Buffer *buffer) { }
+    virtual void setAttribute(size_t idx, const gl::VertexAttribute &attr) { }
+    virtual void setAttributeDivisor(size_t idx, GLuint divisor) { }
+    virtual void enableAttribute(size_t idx, bool enabledState) { }
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(VertexArray11);
+
+    rx::Renderer11 *mRenderer;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_VERTEXARRAY11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.cpp
new file mode 100644
index 0000000000..9bc5b1d2d1
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.cpp
@@ -0,0 +1,209 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexBuffer11.cpp: Defines the D3D11 VertexBuffer implementation.
+
+#include "libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Buffer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/Buffer.h"
+#include "libGLESv2/VertexAttribute.h"
+
+namespace rx
+{
+
+VertexBuffer11::VertexBuffer11(rx::Renderer11 *const renderer) : mRenderer(renderer)
+{
+    mBuffer = NULL;
+    mBufferSize = 0;
+    mDynamicUsage = false;
+}
+
+VertexBuffer11::~VertexBuffer11()
+{
+    SafeRelease(mBuffer);
+}
+
+gl::Error VertexBuffer11::initialize(unsigned int size, bool dynamicUsage)
+{
+    SafeRelease(mBuffer);
+
+    updateSerial();
+
+    if (size > 0)
+    {
+        ID3D11Device* dxDevice = mRenderer->getDevice();
+
+        D3D11_BUFFER_DESC bufferDesc;
+        bufferDesc.ByteWidth = size;
+        bufferDesc.Usage = D3D11_USAGE_DYNAMIC;
+        bufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
+        bufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
+        bufferDesc.MiscFlags = 0;
+        bufferDesc.StructureByteStride = 0;
+
+        HRESULT result = dxDevice->CreateBuffer(&bufferDesc, NULL, &mBuffer);
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal vertex buffer of size, %lu.", size);
+        }
+    }
+
+    mBufferSize = size;
+    mDynamicUsage = dynamicUsage;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+VertexBuffer11 *VertexBuffer11::makeVertexBuffer11(VertexBuffer *vetexBuffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(VertexBuffer11*, vetexBuffer));
+    return static_cast<VertexBuffer11*>(vetexBuffer);
+}
+
+gl::Error VertexBuffer11::storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                                GLint start, GLsizei count, GLsizei instances, unsigned int offset)
+{
+    if (!mBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal vertex buffer is not initialized.");
+    }
+
+    gl::Buffer *buffer = attrib.buffer.get();
+    int inputStride = ComputeVertexAttributeStride(attrib);
+    ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
+
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_NO_OVERWRITE, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal vertex buffer, HRESULT: 0x%08x.", result);
+    }
+
+    uint8_t *output = reinterpret_cast<uint8_t*>(mappedResource.pData) + offset;
+
+    const uint8_t *input = NULL;
+    if (attrib.enabled)
+    {
+        if (buffer)
+        {
+            Buffer11 *storage = Buffer11::makeBuffer11(buffer->getImplementation());
+            input = static_cast<const uint8_t*>(storage->getData()) + static_cast<int>(attrib.offset);
+        }
+        else
+        {
+            input = static_cast<const uint8_t*>(attrib.pointer);
+        }
+    }
+    else
+    {
+        input = reinterpret_cast<const uint8_t*>(currentValue.FloatValues);
+    }
+
+    if (instances == 0 || attrib.divisor == 0)
+    {
+        input += inputStride * start;
+    }
+
+    gl::VertexFormat vertexFormat(attrib, currentValue.Type);
+    const d3d11::VertexFormat &vertexFormatInfo = d3d11::GetVertexFormatInfo(vertexFormat);
+    ASSERT(vertexFormatInfo.copyFunction != NULL);
+    vertexFormatInfo.copyFunction(input, inputStride, count, output);
+
+    dxContext->Unmap(mBuffer, 0);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error VertexBuffer11::getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count,
+                                           GLsizei instances, unsigned int *outSpaceRequired) const
+{
+    unsigned int elementCount = 0;
+    if (attrib.enabled)
+    {
+        if (instances == 0 || attrib.divisor == 0)
+        {
+            elementCount = count;
+        }
+        else
+        {
+            // Round up to divisor, if possible
+            elementCount = rx::UnsignedCeilDivide(static_cast<unsigned int>(instances), attrib.divisor);
+        }
+
+        gl::VertexFormat vertexFormat(attrib);
+        const d3d11::VertexFormat &vertexFormatInfo = d3d11::GetVertexFormatInfo(vertexFormat);
+        const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(vertexFormatInfo.nativeFormat);
+        unsigned int elementSize = dxgiFormatInfo.pixelBytes;
+        if (elementSize <= std::numeric_limits<unsigned int>::max() / elementCount)
+        {
+            if (outSpaceRequired)
+            {
+                *outSpaceRequired = elementSize * elementCount;
+            }
+            return gl::Error(GL_NO_ERROR);
+        }
+        else
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "New vertex buffer size would result in an overflow.");
+        }
+    }
+    else
+    {
+        const unsigned int elementSize = 4;
+        if (outSpaceRequired)
+        {
+            *outSpaceRequired = elementSize * 4;
+        }
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+unsigned int VertexBuffer11::getBufferSize() const
+{
+    return mBufferSize;
+}
+
+gl::Error VertexBuffer11::setBufferSize(unsigned int size)
+{
+    if (size > mBufferSize)
+    {
+        return initialize(size, mDynamicUsage);
+    }
+    else
+    {
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+gl::Error VertexBuffer11::discard()
+{
+    if (!mBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal vertex buffer is not initialized.");
+    }
+
+    ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
+
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal buffer for discarding, HRESULT: 0x%08x", result);
+    }
+
+    dxContext->Unmap(mBuffer, 0);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+ID3D11Buffer *VertexBuffer11::getBuffer() const
+{
+    return mBuffer;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h
new file mode 100644
index 0000000000..0e10da1df8
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h
@@ -0,0 +1,52 @@
+//
+// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexBuffer11.h: Defines the D3D11 VertexBuffer implementation.
+
+#ifndef LIBGLESV2_RENDERER_VERTEXBUFFER11_H_
+#define LIBGLESV2_RENDERER_VERTEXBUFFER11_H_
+
+#include "libGLESv2/renderer/d3d/VertexBuffer.h"
+
+namespace rx
+{
+class Renderer11;
+
+class VertexBuffer11 : public VertexBuffer
+{
+  public:
+    explicit VertexBuffer11(rx::Renderer11 *const renderer);
+    virtual ~VertexBuffer11();
+
+    virtual gl::Error initialize(unsigned int size, bool dynamicUsage);
+
+    static VertexBuffer11 *makeVertexBuffer11(VertexBuffer *vetexBuffer);
+
+    virtual gl::Error storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                            GLint start, GLsizei count, GLsizei instances, unsigned int offset);
+
+    virtual gl::Error getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances,
+                                       unsigned int *outSpaceRequired) const;
+
+    virtual unsigned int getBufferSize() const;
+    virtual gl::Error setBufferSize(unsigned int size);
+    virtual gl::Error discard();
+
+    ID3D11Buffer *getBuffer() const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(VertexBuffer11);
+
+    rx::Renderer11 *const mRenderer;
+
+    ID3D11Buffer *mBuffer;
+    unsigned int mBufferSize;
+    bool mDynamicUsage;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_VERTEXBUFFER11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp
new file mode 100644
index 0000000000..c07828757d
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp
@@ -0,0 +1,1075 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// formatutils11.cpp: Queries for GL image formats and their translations to D3D11
+// formats.
+
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/generatemip.h"
+#include "libGLESv2/renderer/loadimage.h"
+#include "libGLESv2/renderer/copyimage.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/copyvertex.h"
+
+namespace rx
+{
+
+namespace d3d11
+{
+
+typedef std::map<DXGI_FORMAT, GLenum> DXGIToESFormatMap;
+
+inline void AddDXGIToESEntry(DXGIToESFormatMap *map, DXGI_FORMAT key, GLenum value)
+{
+    map->insert(std::make_pair(key, value));
+}
+
+static DXGIToESFormatMap BuildDXGIToESFormatMap()
+{
+    DXGIToESFormatMap map;
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_UNKNOWN,                  GL_NONE);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_A8_UNORM,                 GL_ALPHA8_EXT);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8_UNORM,                 GL_R8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8_UNORM,               GL_RG8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8B8A8_UNORM,           GL_RGBA8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8B8A8_UNORM_SRGB,      GL_SRGB8_ALPHA8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_B8G8R8A8_UNORM,           GL_BGRA8_EXT);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8_SNORM,                 GL_R8_SNORM);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8_SNORM,               GL_RG8_SNORM);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8B8A8_SNORM,           GL_RGBA8_SNORM);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8_UINT,                  GL_R8UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16_UINT,                 GL_R16UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32_UINT,                 GL_R32UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8_UINT,                GL_RG8UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16G16_UINT,              GL_RG16UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32_UINT,              GL_RG32UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32B32_UINT,           GL_RGB32UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8B8A8_UINT,            GL_RGBA8UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16G16B16A16_UINT,        GL_RGBA16UI);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32B32A32_UINT,        GL_RGBA32UI);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8_SINT,                  GL_R8I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16_SINT,                 GL_R16I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32_SINT,                 GL_R32I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8_SINT,                GL_RG8I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16G16_SINT,              GL_RG16I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32_SINT,              GL_RG32I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32B32_SINT,           GL_RGB32I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R8G8B8A8_SINT,            GL_RGBA8I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16G16B16A16_SINT,        GL_RGBA16I);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32B32A32_SINT,        GL_RGBA32I);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R10G10B10A2_UNORM,        GL_RGB10_A2);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R10G10B10A2_UINT,         GL_RGB10_A2UI);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16_FLOAT,                GL_R16F);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16G16_FLOAT,             GL_RG16F);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16G16B16A16_FLOAT,       GL_RGBA16F);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32_FLOAT,                GL_R32F);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32_FLOAT,             GL_RG32F);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32B32_FLOAT,          GL_RGB32F);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G32B32A32_FLOAT,       GL_RGBA32F);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R9G9B9E5_SHAREDEXP,       GL_RGB9_E5);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R11G11B10_FLOAT,          GL_R11F_G11F_B10F);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16_TYPELESS,             GL_DEPTH_COMPONENT16);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R16_UNORM,                GL_DEPTH_COMPONENT16);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_D16_UNORM,                GL_DEPTH_COMPONENT16);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R24G8_TYPELESS,           GL_DEPTH24_STENCIL8_OES);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R24_UNORM_X8_TYPELESS,    GL_DEPTH24_STENCIL8_OES);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_D24_UNORM_S8_UINT,        GL_DEPTH24_STENCIL8_OES);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32G8X24_TYPELESS,        GL_DEPTH32F_STENCIL8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32_FLOAT_X8X24_TYPELESS, GL_DEPTH32F_STENCIL8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_D32_FLOAT_S8X24_UINT,     GL_DEPTH32F_STENCIL8);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_R32_TYPELESS,             GL_DEPTH_COMPONENT32F);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_D32_FLOAT,                GL_DEPTH_COMPONENT32F);
+
+    AddDXGIToESEntry(&map, DXGI_FORMAT_BC1_UNORM,                GL_COMPRESSED_RGBA_S3TC_DXT1_EXT);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_BC2_UNORM,                GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE);
+    AddDXGIToESEntry(&map, DXGI_FORMAT_BC3_UNORM,                GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE);
+
+    return map;
+}
+
+struct D3D11FastCopyFormat
+{
+    GLenum destFormat;
+    GLenum destType;
+    ColorCopyFunction copyFunction;
+
+    D3D11FastCopyFormat(GLenum destFormat, GLenum destType, ColorCopyFunction copyFunction)
+        : destFormat(destFormat), destType(destType), copyFunction(copyFunction)
+    { }
+
+    bool operator<(const D3D11FastCopyFormat& other) const
+    {
+        return memcmp(this, &other, sizeof(D3D11FastCopyFormat)) < 0;
+    }
+};
+
+typedef std::multimap<DXGI_FORMAT, D3D11FastCopyFormat> D3D11FastCopyMap;
+
+static D3D11FastCopyMap BuildFastCopyMap()
+{
+    D3D11FastCopyMap map;
+
+    map.insert(std::make_pair(DXGI_FORMAT_B8G8R8A8_UNORM, D3D11FastCopyFormat(GL_RGBA, GL_UNSIGNED_BYTE, CopyBGRA8ToRGBA8)));
+
+    return map;
+}
+
+struct DXGIDepthStencilInfo
+{
+    unsigned int depthBits;
+    unsigned int depthOffset;
+    unsigned int stencilBits;
+    unsigned int stencilOffset;
+};
+
+typedef std::map<DXGI_FORMAT, DXGIDepthStencilInfo> DepthStencilInfoMap;
+typedef std::pair<DXGI_FORMAT, DXGIDepthStencilInfo> DepthStencilInfoPair;
+
+static inline void InsertDXGIDepthStencilInfo(DepthStencilInfoMap *map, DXGI_FORMAT format, unsigned int depthBits,
+                                              unsigned int depthOffset, unsigned int stencilBits, unsigned int stencilOffset)
+{
+    DXGIDepthStencilInfo info;
+    info.depthBits = depthBits;
+    info.depthOffset = depthOffset;
+    info.stencilBits = stencilBits;
+    info.stencilOffset = stencilOffset;
+
+    map->insert(std::make_pair(format, info));
+}
+
+static DepthStencilInfoMap BuildDepthStencilInfoMap()
+{
+    DepthStencilInfoMap map;
+
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R16_TYPELESS,             16, 0, 0,  0);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R16_UNORM,                16, 0, 0,  0);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_D16_UNORM,                16, 0, 0,  0);
+
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R24G8_TYPELESS,           24, 0, 8, 24);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R24_UNORM_X8_TYPELESS,    24, 0, 8, 24);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_D24_UNORM_S8_UINT,        24, 0, 8, 24);
+
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R32_TYPELESS,             32, 0, 0,  0);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R32_FLOAT,                32, 0, 0,  0);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_D32_FLOAT,                32, 0, 0,  0);
+
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R32G8X24_TYPELESS,        32, 0, 8, 32);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_R32_FLOAT_X8X24_TYPELESS, 32, 0, 8, 32);
+    InsertDXGIDepthStencilInfo(&map, DXGI_FORMAT_D32_FLOAT_S8X24_UINT,     32, 0, 8, 32);
+
+    return map;
+}
+
+typedef std::map<DXGI_FORMAT, DXGIFormat> DXGIFormatInfoMap;
+
+DXGIFormat::DXGIFormat()
+    : pixelBytes(0),
+      blockWidth(0),
+      blockHeight(0),
+      depthBits(0),
+      depthOffset(0),
+      stencilBits(0),
+      stencilOffset(0),
+      internalFormat(GL_NONE),
+      componentType(GL_NONE),
+      mipGenerationFunction(NULL),
+      colorReadFunction(NULL),
+      fastCopyFunctions()
+{
+}
+
+ColorCopyFunction DXGIFormat::getFastCopyFunction(GLenum format, GLenum type) const
+{
+    FastCopyFunctionMap::const_iterator iter = fastCopyFunctions.find(std::make_pair(format, type));
+    return (iter != fastCopyFunctions.end()) ? iter->second : NULL;
+}
+
+void AddDXGIFormat(DXGIFormatInfoMap *map, DXGI_FORMAT dxgiFormat, GLuint pixelBits, GLuint blockWidth, GLuint blockHeight,
+                   GLenum componentType, MipGenerationFunction mipFunc, ColorReadFunction readFunc)
+{
+    DXGIFormat info;
+    info.pixelBytes = pixelBits / 8;
+    info.blockWidth = blockWidth;
+    info.blockHeight = blockHeight;
+
+    static const DepthStencilInfoMap dsInfoMap = BuildDepthStencilInfoMap();
+    DepthStencilInfoMap::const_iterator dsInfoIter = dsInfoMap.find(dxgiFormat);
+    if (dsInfoIter != dsInfoMap.end())
+    {
+        info.depthBits = dsInfoIter->second.depthBits;
+        info.depthOffset = dsInfoIter->second.depthOffset;
+        info.stencilBits = dsInfoIter->second.stencilBits;
+        info.stencilOffset = dsInfoIter->second.stencilOffset;
+    }
+    else
+    {
+        info.depthBits = 0;
+        info.depthOffset = 0;
+        info.stencilBits = 0;
+        info.stencilOffset = 0;
+    }
+
+    static const DXGIToESFormatMap dxgiToESMap = BuildDXGIToESFormatMap();
+    DXGIToESFormatMap::const_iterator dxgiToESIter = dxgiToESMap.find(dxgiFormat);
+    info.internalFormat = (dxgiToESIter != dxgiToESMap.end()) ? dxgiToESIter->second : GL_NONE;
+
+    info.componentType = componentType;
+
+    info.mipGenerationFunction = mipFunc;
+    info.colorReadFunction = readFunc;
+
+    static const D3D11FastCopyMap fastCopyMap = BuildFastCopyMap();
+    std::pair<D3D11FastCopyMap::const_iterator, D3D11FastCopyMap::const_iterator> fastCopyIter = fastCopyMap.equal_range(dxgiFormat);
+    for (D3D11FastCopyMap::const_iterator i = fastCopyIter.first; i != fastCopyIter.second; i++)
+    {
+        info.fastCopyFunctions.insert(std::make_pair(std::make_pair(i->second.destFormat, i->second.destType), i->second.copyFunction));
+    }
+
+    map->insert(std::make_pair(dxgiFormat, info));
+}
+
+// A map to determine the pixel size and mipmap generation function of a given DXGI format
+static DXGIFormatInfoMap BuildDXGIFormatInfoMap()
+{
+    DXGIFormatInfoMap map;
+
+    //                | DXGI format                          |S   |W |H |Component Type         | Mip generation function   | Color read function
+    AddDXGIFormat(&map, DXGI_FORMAT_UNKNOWN,                  0,   0, 0, GL_NONE,                NULL,                       NULL);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_A8_UNORM,                 8,   1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<A8>,            ReadColor<A8, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8_UNORM,                 8,   1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<R8>,            ReadColor<R8, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8_UNORM,               16,  1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<R8G8>,          ReadColor<R8G8, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8B8A8_UNORM,           32,  1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<R8G8B8A8>,      ReadColor<R8G8B8A8, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8B8A8_UNORM_SRGB,      32,  1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<R8G8B8A8>,      ReadColor<R8G8B8A8, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_B8G8R8A8_UNORM,           32,  1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<B8G8R8A8>,      ReadColor<B8G8R8A8, GLfloat>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R8_SNORM,                 8,   1, 1, GL_SIGNED_NORMALIZED,   GenerateMip<R8S>,           ReadColor<R8S, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8_SNORM,               16,  1, 1, GL_SIGNED_NORMALIZED,   GenerateMip<R8G8S>,         ReadColor<R8G8S, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8B8A8_SNORM,           32,  1, 1, GL_SIGNED_NORMALIZED,   GenerateMip<R8G8B8A8S>,     ReadColor<R8G8B8A8S, GLfloat>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R8_UINT,                  8,   1, 1, GL_UNSIGNED_INT,        GenerateMip<R8>,            ReadColor<R8, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_UINT,                 16,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R16>,           ReadColor<R16, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32_UINT,                 32,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R32>,           ReadColor<R32, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8_UINT,                16,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R8G8>,          ReadColor<R8G8, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16_UINT,              32,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R16G16>,        ReadColor<R16G16, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32_UINT,              64,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R32G32>,        ReadColor<R32G32, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32B32_UINT,           96,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R32G32B32>,     ReadColor<R32G32B32, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8B8A8_UINT,            32,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R8G8B8A8>,      ReadColor<R8G8B8A8, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16B16A16_UINT,        64,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R16G16B16A16>,  ReadColor<R16G16B16A16, GLuint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32B32A32_UINT,        128, 1, 1, GL_UNSIGNED_INT,        GenerateMip<R32G32B32A32>,  ReadColor<R32G32B32A32, GLuint>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R8_SINT,                  8,   1, 1, GL_INT,                 GenerateMip<R8S>,           ReadColor<R8S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_SINT,                 16,  1, 1, GL_INT,                 GenerateMip<R16S>,          ReadColor<R16S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32_SINT,                 32,  1, 1, GL_INT,                 GenerateMip<R32S>,          ReadColor<R32S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8_SINT,                16,  1, 1, GL_INT,                 GenerateMip<R8G8S>,         ReadColor<R8G8S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16_SINT,              32,  1, 1, GL_INT,                 GenerateMip<R16G16S>,       ReadColor<R16G16S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32_SINT,              64,  1, 1, GL_INT,                 GenerateMip<R32G32S>,       ReadColor<R32G32S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32B32_SINT,           96,  1, 1, GL_INT,                 GenerateMip<R32G32B32S>,    ReadColor<R32G32B32S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R8G8B8A8_SINT,            32,  1, 1, GL_INT,                 GenerateMip<R8G8B8A8S>,     ReadColor<R8G8B8A8S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16B16A16_SINT,        64,  1, 1, GL_INT,                 GenerateMip<R16G16B16A16S>, ReadColor<R16G16B16A16S, GLint>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32B32A32_SINT,        128, 1, 1, GL_INT,                 GenerateMip<R32G32B32A32S>, ReadColor<R32G32B32A32S, GLint>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R10G10B10A2_UNORM,        32,  1, 1, GL_UNSIGNED_NORMALIZED, GenerateMip<R10G10B10A2>,   ReadColor<R10G10B10A2, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R10G10B10A2_UINT,         32,  1, 1, GL_UNSIGNED_INT,        GenerateMip<R10G10B10A2>,   ReadColor<R10G10B10A2, GLuint>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_FLOAT,                16,  1, 1, GL_FLOAT,               GenerateMip<R16F>,          ReadColor<R16F, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16_FLOAT,             32,  1, 1, GL_FLOAT,               GenerateMip<R16G16F>,       ReadColor<R16G16F, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16B16A16_FLOAT,       64,  1, 1, GL_FLOAT,               GenerateMip<R16G16B16A16F>, ReadColor<R16G16B16A16F, GLfloat>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R32_FLOAT,                32,  1, 1, GL_FLOAT,               GenerateMip<R32F>,          ReadColor<R32F, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32_FLOAT,             64,  1, 1, GL_FLOAT,               GenerateMip<R32G32F>,       ReadColor<R32G32F, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32B32_FLOAT,          96,  1, 1, GL_FLOAT,               NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G32B32A32_FLOAT,       128, 1, 1, GL_FLOAT,               GenerateMip<R32G32B32A32F>, ReadColor<R32G32B32A32F, GLfloat>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R9G9B9E5_SHAREDEXP,       32,  1, 1, GL_FLOAT,               GenerateMip<R9G9B9E5>,      ReadColor<R9G9B9E5, GLfloat>);
+    AddDXGIFormat(&map, DXGI_FORMAT_R11G11B10_FLOAT,          32,  1, 1, GL_FLOAT,               GenerateMip<R11G11B10F>,    ReadColor<R11G11B10F, GLfloat>);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_TYPELESS,             16,  1, 1, GL_NONE,                NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_UNORM,                16,  1, 1, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_D16_UNORM,                16,  1, 1, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R24G8_TYPELESS,           32,  1, 1, GL_NONE,                NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R24_UNORM_X8_TYPELESS,    32,  1, 1, GL_NONE,                NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_D24_UNORM_S8_UINT,        32,  1, 1, GL_UNSIGNED_INT,        NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32G8X24_TYPELESS,        64,  1, 1, GL_NONE,                NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32_FLOAT_X8X24_TYPELESS, 64,  1, 1, GL_NONE,                NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_D32_FLOAT_S8X24_UINT,     64,  1, 1, GL_UNSIGNED_INT,        NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R32_TYPELESS,             32,  1, 1, GL_NONE,                NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_D32_FLOAT,                32,  1, 1, GL_FLOAT,               NULL,                       NULL);
+
+    AddDXGIFormat(&map, DXGI_FORMAT_BC1_UNORM,                64,  4, 4, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_BC2_UNORM,                128, 4, 4, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_BC3_UNORM,                128, 4, 4, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+
+    // Useful formats for vertex buffers
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_UNORM,                16,  1, 1, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16_SNORM,                16,  1, 1, GL_SIGNED_NORMALIZED,   NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16_UNORM,             32,  1, 1, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16_SNORM,             32,  1, 1, GL_SIGNED_NORMALIZED,   NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16B16A16_UNORM,       64,  1, 1, GL_UNSIGNED_NORMALIZED, NULL,                       NULL);
+    AddDXGIFormat(&map, DXGI_FORMAT_R16G16B16A16_SNORM,       64,  1, 1, GL_SIGNED_NORMALIZED,   NULL,                       NULL);
+
+    return map;
+}
+
+const DXGIFormat &GetDXGIFormatInfo(DXGI_FORMAT format)
+{
+    static const DXGIFormatInfoMap infoMap = BuildDXGIFormatInfoMap();
+    DXGIFormatInfoMap::const_iterator iter = infoMap.find(format);
+    if (iter != infoMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static DXGIFormat defaultInfo;
+        return defaultInfo;
+    }
+}
+
+struct SwizzleSizeType
+{
+    size_t maxComponentSize;
+    GLenum componentType;
+
+    SwizzleSizeType()
+        : maxComponentSize(0), componentType(GL_NONE)
+    { }
+
+    SwizzleSizeType(size_t maxComponentSize, GLenum componentType)
+        : maxComponentSize(maxComponentSize), componentType(componentType)
+    { }
+
+    bool operator<(const SwizzleSizeType& other) const
+    {
+        return (maxComponentSize != other.maxComponentSize) ? (maxComponentSize < other.maxComponentSize)
+                                                            : (componentType < other.componentType);
+    }
+};
+
+struct SwizzleFormatInfo
+{
+    DXGI_FORMAT mTexFormat;
+    DXGI_FORMAT mSRVFormat;
+    DXGI_FORMAT mRTVFormat;
+
+    SwizzleFormatInfo()
+        : mTexFormat(DXGI_FORMAT_UNKNOWN), mSRVFormat(DXGI_FORMAT_UNKNOWN), mRTVFormat(DXGI_FORMAT_UNKNOWN)
+    { }
+
+    SwizzleFormatInfo(DXGI_FORMAT texFormat, DXGI_FORMAT srvFormat, DXGI_FORMAT rtvFormat)
+        : mTexFormat(texFormat), mSRVFormat(srvFormat), mRTVFormat(rtvFormat)
+    { }
+};
+
+typedef std::map<SwizzleSizeType, SwizzleFormatInfo> SwizzleInfoMap;
+typedef std::pair<SwizzleSizeType, SwizzleFormatInfo> SwizzleInfoPair;
+
+static SwizzleInfoMap BuildSwizzleInfoMap()
+{
+    SwizzleInfoMap map;
+
+    map.insert(SwizzleInfoPair(SwizzleSizeType( 8, GL_UNSIGNED_NORMALIZED), SwizzleFormatInfo(DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM    )));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(16, GL_UNSIGNED_NORMALIZED), SwizzleFormatInfo(DXGI_FORMAT_R16G16B16A16_UNORM, DXGI_FORMAT_R16G16B16A16_UNORM, DXGI_FORMAT_R16G16B16A16_UNORM)));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(24, GL_UNSIGNED_NORMALIZED), SwizzleFormatInfo(DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT)));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(32, GL_UNSIGNED_NORMALIZED), SwizzleFormatInfo(DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT)));
+
+    map.insert(SwizzleInfoPair(SwizzleSizeType( 8, GL_SIGNED_NORMALIZED  ), SwizzleFormatInfo(DXGI_FORMAT_R8G8B8A8_SNORM,     DXGI_FORMAT_R8G8B8A8_SNORM,     DXGI_FORMAT_R8G8B8A8_SNORM    )));
+
+    map.insert(SwizzleInfoPair(SwizzleSizeType(16, GL_FLOAT              ), SwizzleFormatInfo(DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_R16G16B16A16_FLOAT)));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(32, GL_FLOAT              ), SwizzleFormatInfo(DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT)));
+
+    map.insert(SwizzleInfoPair(SwizzleSizeType( 8, GL_UNSIGNED_INT       ), SwizzleFormatInfo(DXGI_FORMAT_R8G8B8A8_UINT,      DXGI_FORMAT_R8G8B8A8_UINT,      DXGI_FORMAT_R8G8B8A8_UINT     )));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(16, GL_UNSIGNED_INT       ), SwizzleFormatInfo(DXGI_FORMAT_R16G16B16A16_UINT,  DXGI_FORMAT_R16G16B16A16_UINT,  DXGI_FORMAT_R16G16B16A16_UINT )));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(32, GL_UNSIGNED_INT       ), SwizzleFormatInfo(DXGI_FORMAT_R32G32B32A32_UINT,  DXGI_FORMAT_R32G32B32A32_UINT,  DXGI_FORMAT_R32G32B32A32_UINT )));
+
+    map.insert(SwizzleInfoPair(SwizzleSizeType( 8, GL_INT                ), SwizzleFormatInfo(DXGI_FORMAT_R8G8B8A8_SINT,      DXGI_FORMAT_R8G8B8A8_SINT,      DXGI_FORMAT_R8G8B8A8_SINT     )));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(16, GL_INT                ), SwizzleFormatInfo(DXGI_FORMAT_R16G16B16A16_SINT,  DXGI_FORMAT_R16G16B16A16_SINT,  DXGI_FORMAT_R16G16B16A16_SINT )));
+    map.insert(SwizzleInfoPair(SwizzleSizeType(32, GL_INT                ), SwizzleFormatInfo(DXGI_FORMAT_R32G32B32A32_SINT,  DXGI_FORMAT_R32G32B32A32_SINT,  DXGI_FORMAT_R32G32B32A32_SINT )));
+
+    return map;
+}
+
+typedef std::pair<GLint, InitializeTextureDataFunction> InternalFormatInitializerPair;
+typedef std::map<GLint, InitializeTextureDataFunction> InternalFormatInitializerMap;
+
+static InternalFormatInitializerMap BuildInternalFormatInitializerMap()
+{
+    InternalFormatInitializerMap map;
+
+    map.insert(InternalFormatInitializerPair(GL_RGB8,    Initialize4ComponentData<GLubyte,  0x00,       0x00,       0x00,       0xFF>          ));
+    map.insert(InternalFormatInitializerPair(GL_RGB565,  Initialize4ComponentData<GLubyte,  0x00,       0x00,       0x00,       0xFF>          ));
+    map.insert(InternalFormatInitializerPair(GL_SRGB8,   Initialize4ComponentData<GLubyte,  0x00,       0x00,       0x00,       0xFF>          ));
+    map.insert(InternalFormatInitializerPair(GL_RGB16F,  Initialize4ComponentData<GLhalf,   0x0000,     0x0000,     0x0000,     gl::Float16One>));
+    map.insert(InternalFormatInitializerPair(GL_RGB32F,  Initialize4ComponentData<GLfloat,  0x00000000, 0x00000000, 0x00000000, gl::Float32One>));
+    map.insert(InternalFormatInitializerPair(GL_RGB8UI,  Initialize4ComponentData<GLubyte,  0x00,       0x00,       0x00,       0x01>          ));
+    map.insert(InternalFormatInitializerPair(GL_RGB8I,   Initialize4ComponentData<GLbyte,   0x00,       0x00,       0x00,       0x01>          ));
+    map.insert(InternalFormatInitializerPair(GL_RGB16UI, Initialize4ComponentData<GLushort, 0x0000,     0x0000,     0x0000,     0x0001>        ));
+    map.insert(InternalFormatInitializerPair(GL_RGB16I,  Initialize4ComponentData<GLshort,  0x0000,     0x0000,     0x0000,     0x0001>        ));
+    map.insert(InternalFormatInitializerPair(GL_RGB32UI, Initialize4ComponentData<GLuint,   0x00000000, 0x00000000, 0x00000000, 0x00000001>    ));
+    map.insert(InternalFormatInitializerPair(GL_RGB32I,  Initialize4ComponentData<GLint,    0x00000000, 0x00000000, 0x00000000, 0x00000001>    ));
+
+    return map;
+}
+
+// ES3 image loading functions vary based on the internal format and data type given,
+// this map type determines the loading function from the internal format and type supplied
+// to glTex*Image*D and the destination DXGI_FORMAT. Source formats and types are taken from
+// Tables 3.2 and 3.3 of the ES 3 spec.
+typedef std::pair<GLenum, LoadImageFunction> TypeLoadFunctionPair;
+typedef std::map<GLenum, std::vector<TypeLoadFunctionPair> > D3D11LoadFunctionMap;
+
+static void UnimplementedLoadFunction(size_t width, size_t height, size_t depth,
+                                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    UNIMPLEMENTED();
+}
+
+static void UnreachableLoadFunction(size_t width, size_t height, size_t depth,
+                                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    UNREACHABLE();
+}
+
+// A helper function to insert data into the D3D11LoadFunctionMap with fewer characters.
+static inline void InsertLoadFunction(D3D11LoadFunctionMap *map, GLenum internalFormat, GLenum type,
+                                      LoadImageFunction loadFunc)
+{
+    (*map)[internalFormat].push_back(TypeLoadFunctionPair(type, loadFunc));
+}
+
+D3D11LoadFunctionMap BuildD3D11LoadFunctionMap()
+{
+    D3D11LoadFunctionMap map;
+
+    //                      | Internal format      | Type                             | Load function                       |
+    InsertLoadFunction(&map, GL_RGBA8,              GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>             );
+    InsertLoadFunction(&map, GL_RGB5_A1,            GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>             );
+    InsertLoadFunction(&map, GL_RGBA4,              GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>             );
+    InsertLoadFunction(&map, GL_SRGB8_ALPHA8,       GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>             );
+    InsertLoadFunction(&map, GL_RGBA8_SNORM,        GL_BYTE,                           LoadToNative<GLbyte, 4>              );
+    InsertLoadFunction(&map, GL_RGBA4,              GL_UNSIGNED_SHORT_4_4_4_4,         LoadRGBA4ToRGBA8                     );
+    InsertLoadFunction(&map, GL_RGB10_A2,           GL_UNSIGNED_INT_2_10_10_10_REV,    LoadToNative<GLuint, 1>              );
+    InsertLoadFunction(&map, GL_RGB5_A1,            GL_UNSIGNED_SHORT_5_5_5_1,         LoadRGB5A1ToRGBA8                    );
+    InsertLoadFunction(&map, GL_RGB5_A1,            GL_UNSIGNED_INT_2_10_10_10_REV,    LoadRGB10A2ToRGBA8                   );
+    InsertLoadFunction(&map, GL_RGBA16F,            GL_HALF_FLOAT,                     LoadToNative<GLhalf, 4>              );
+    InsertLoadFunction(&map, GL_RGBA16F,            GL_HALF_FLOAT_OES,                 LoadToNative<GLhalf, 4>              );
+    InsertLoadFunction(&map, GL_RGBA32F,            GL_FLOAT,                          LoadToNative<GLfloat, 4>             );
+    InsertLoadFunction(&map, GL_RGBA16F,            GL_FLOAT,                          Load32FTo16F<4>                      );
+    InsertLoadFunction(&map, GL_RGBA8UI,            GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>             );
+    InsertLoadFunction(&map, GL_RGBA8I,             GL_BYTE,                           LoadToNative<GLbyte, 4>              );
+    InsertLoadFunction(&map, GL_RGBA16UI,           GL_UNSIGNED_SHORT,                 LoadToNative<GLushort, 4>            );
+    InsertLoadFunction(&map, GL_RGBA16I,            GL_SHORT,                          LoadToNative<GLshort, 4>             );
+    InsertLoadFunction(&map, GL_RGBA32UI,           GL_UNSIGNED_INT,                   LoadToNative<GLuint, 4>              );
+    InsertLoadFunction(&map, GL_RGBA32I,            GL_INT,                            LoadToNative<GLint, 4>               );
+    InsertLoadFunction(&map, GL_RGB10_A2UI,         GL_UNSIGNED_INT_2_10_10_10_REV,    LoadToNative<GLuint, 1>              );
+    InsertLoadFunction(&map, GL_RGB8,               GL_UNSIGNED_BYTE,                  LoadToNative3To4<GLubyte, 0xFF>      );
+    InsertLoadFunction(&map, GL_RGB565,             GL_UNSIGNED_BYTE,                  LoadToNative3To4<GLubyte, 0xFF>      );
+    InsertLoadFunction(&map, GL_SRGB8,              GL_UNSIGNED_BYTE,                  LoadToNative3To4<GLubyte, 0xFF>      );
+    InsertLoadFunction(&map, GL_RGB8_SNORM,         GL_BYTE,                           LoadToNative3To4<GLbyte, 0x7F>       );
+    InsertLoadFunction(&map, GL_RGB565,             GL_UNSIGNED_SHORT_5_6_5,           LoadR5G6B5ToRGBA8                    );
+    InsertLoadFunction(&map, GL_R11F_G11F_B10F,     GL_UNSIGNED_INT_10F_11F_11F_REV,   LoadToNative<GLuint, 1>              );
+    InsertLoadFunction(&map, GL_RGB9_E5,            GL_UNSIGNED_INT_5_9_9_9_REV,       LoadToNative<GLuint, 1>              );
+    InsertLoadFunction(&map, GL_RGB16F,             GL_HALF_FLOAT,                     LoadToNative3To4<GLhalf, gl::Float16One>);
+    InsertLoadFunction(&map, GL_RGB16F,             GL_HALF_FLOAT_OES,                 LoadToNative3To4<GLhalf, gl::Float16One>);
+    InsertLoadFunction(&map, GL_R11F_G11F_B10F,     GL_HALF_FLOAT,                     LoadRGB16FToRG11B10F                 );
+    InsertLoadFunction(&map, GL_R11F_G11F_B10F,     GL_HALF_FLOAT_OES,                 LoadRGB16FToRG11B10F                 );
+    InsertLoadFunction(&map, GL_RGB9_E5,            GL_HALF_FLOAT,                     LoadRGB16FToRGB9E5                   );
+    InsertLoadFunction(&map, GL_RGB9_E5,            GL_HALF_FLOAT_OES,                 LoadRGB16FToRGB9E5                   );
+    InsertLoadFunction(&map, GL_RGB32F,             GL_FLOAT,                          LoadToNative3To4<GLfloat, gl::Float32One>);
+    InsertLoadFunction(&map, GL_RGB16F,             GL_FLOAT,                          LoadRGB32FToRGBA16F                  );
+    InsertLoadFunction(&map, GL_R11F_G11F_B10F,     GL_FLOAT,                          LoadRGB32FToRG11B10F                 );
+    InsertLoadFunction(&map, GL_RGB9_E5,            GL_FLOAT,                          LoadRGB32FToRGB9E5                   );
+    InsertLoadFunction(&map, GL_RGB8UI,             GL_UNSIGNED_BYTE,                  LoadToNative3To4<GLubyte, 0x01>      );
+    InsertLoadFunction(&map, GL_RGB8I,              GL_BYTE,                           LoadToNative3To4<GLbyte, 0x01>       );
+    InsertLoadFunction(&map, GL_RGB16UI,            GL_UNSIGNED_SHORT,                 LoadToNative3To4<GLushort, 0x0001>   );
+    InsertLoadFunction(&map, GL_RGB16I,             GL_SHORT,                          LoadToNative3To4<GLshort, 0x0001>    );
+    InsertLoadFunction(&map, GL_RGB32UI,            GL_UNSIGNED_INT,                   LoadToNative3To4<GLuint, 0x00000001> );
+    InsertLoadFunction(&map, GL_RGB32I,             GL_INT,                            LoadToNative3To4<GLint, 0x00000001>  );
+    InsertLoadFunction(&map, GL_RG8,                GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 2>             );
+    InsertLoadFunction(&map, GL_RG8_SNORM,          GL_BYTE,                           LoadToNative<GLbyte, 2>              );
+    InsertLoadFunction(&map, GL_RG16F,              GL_HALF_FLOAT,                     LoadToNative<GLhalf, 2>              );
+    InsertLoadFunction(&map, GL_RG16F,              GL_HALF_FLOAT_OES,                 LoadToNative<GLhalf, 2>              );
+    InsertLoadFunction(&map, GL_RG32F,              GL_FLOAT,                          LoadToNative<GLfloat, 2>             );
+    InsertLoadFunction(&map, GL_RG16F,              GL_FLOAT,                          Load32FTo16F<2>                      );
+    InsertLoadFunction(&map, GL_RG8UI,              GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 2>             );
+    InsertLoadFunction(&map, GL_RG8I,               GL_BYTE,                           LoadToNative<GLbyte, 2>              );
+    InsertLoadFunction(&map, GL_RG16UI,             GL_UNSIGNED_SHORT,                 LoadToNative<GLushort, 2>            );
+    InsertLoadFunction(&map, GL_RG16I,              GL_SHORT,                          LoadToNative<GLshort, 2>             );
+    InsertLoadFunction(&map, GL_RG32UI,             GL_UNSIGNED_INT,                   LoadToNative<GLuint, 2>              );
+    InsertLoadFunction(&map, GL_RG32I,              GL_INT,                            LoadToNative<GLint, 2>               );
+    InsertLoadFunction(&map, GL_R8,                 GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 1>             );
+    InsertLoadFunction(&map, GL_R8_SNORM,           GL_BYTE,                           LoadToNative<GLbyte, 1>              );
+    InsertLoadFunction(&map, GL_R16F,               GL_HALF_FLOAT,                     LoadToNative<GLhalf, 1>              );
+    InsertLoadFunction(&map, GL_R16F,               GL_HALF_FLOAT_OES,                 LoadToNative<GLhalf, 1>              );
+    InsertLoadFunction(&map, GL_R32F,               GL_FLOAT,                          LoadToNative<GLfloat, 1>             );
+    InsertLoadFunction(&map, GL_R16F,               GL_FLOAT,                          Load32FTo16F<1>                      );
+    InsertLoadFunction(&map, GL_R8UI,               GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 1>             );
+    InsertLoadFunction(&map, GL_R8I,                GL_BYTE,                           LoadToNative<GLbyte, 1>              );
+    InsertLoadFunction(&map, GL_R16UI,              GL_UNSIGNED_SHORT,                 LoadToNative<GLushort, 1>            );
+    InsertLoadFunction(&map, GL_R16I,               GL_SHORT,                          LoadToNative<GLshort, 1>             );
+    InsertLoadFunction(&map, GL_R32UI,              GL_UNSIGNED_INT,                   LoadToNative<GLuint, 1>              );
+    InsertLoadFunction(&map, GL_R32I,               GL_INT,                            LoadToNative<GLint, 1>               );
+    InsertLoadFunction(&map, GL_DEPTH_COMPONENT16,  GL_UNSIGNED_SHORT,                 LoadToNative<GLushort, 1>            );
+    InsertLoadFunction(&map, GL_DEPTH_COMPONENT24,  GL_UNSIGNED_INT,                   LoadR32ToR24G8                       );
+    InsertLoadFunction(&map, GL_DEPTH_COMPONENT16,  GL_UNSIGNED_INT,                   LoadR32ToR16                         );
+    InsertLoadFunction(&map, GL_DEPTH_COMPONENT32F, GL_FLOAT,                          LoadToNative<GLfloat, 1>             );
+    InsertLoadFunction(&map, GL_DEPTH24_STENCIL8,   GL_UNSIGNED_INT_24_8,              LoadR32ToR24G8                       );
+    InsertLoadFunction(&map, GL_DEPTH32F_STENCIL8,  GL_FLOAT_32_UNSIGNED_INT_24_8_REV, LoadToNative<GLuint, 2>              );
+
+    // Unsized formats
+    // Load functions are unreachable because they are converted to sized internal formats based on
+    // the format and type before loading takes place.
+    InsertLoadFunction(&map, GL_RGBA,               GL_UNSIGNED_BYTE,                  UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_RGBA,               GL_UNSIGNED_SHORT_4_4_4_4,         UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_RGBA,               GL_UNSIGNED_SHORT_5_5_5_1,         UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_RGB,                GL_UNSIGNED_BYTE,                  UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_RGB,                GL_UNSIGNED_SHORT_5_6_5,           UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA,    GL_UNSIGNED_BYTE,                  UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_LUMINANCE,          GL_UNSIGNED_BYTE,                  UnreachableLoadFunction              );
+    InsertLoadFunction(&map, GL_ALPHA,              GL_UNSIGNED_BYTE,                  UnreachableLoadFunction              );
+
+    // From GL_OES_texture_float
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA,    GL_FLOAT,                          LoadLA32FToRGBA32F                   );
+    InsertLoadFunction(&map, GL_LUMINANCE,          GL_FLOAT,                          LoadL32FToRGBA32F                    );
+    InsertLoadFunction(&map, GL_ALPHA,              GL_FLOAT,                          LoadA32FToRGBA32F                    );
+
+    // From GL_OES_texture_half_float
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA,    GL_HALF_FLOAT,                     LoadLA16FToRGBA16F                   );
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA,    GL_HALF_FLOAT_OES,                 LoadLA16FToRGBA16F                   );
+    InsertLoadFunction(&map, GL_LUMINANCE,          GL_HALF_FLOAT,                     LoadL16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_LUMINANCE,          GL_HALF_FLOAT_OES,                 LoadL16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_ALPHA,              GL_HALF_FLOAT,                     LoadA16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_ALPHA,              GL_HALF_FLOAT_OES,                 LoadA16FToRGBA16F                    );
+
+    // From GL_EXT_texture_storage
+    InsertLoadFunction(&map, GL_ALPHA8_EXT,             GL_UNSIGNED_BYTE,              LoadA8ToRGBA8                        );
+    InsertLoadFunction(&map, GL_LUMINANCE8_EXT,         GL_UNSIGNED_BYTE,              LoadL8ToRGBA8                        );
+    InsertLoadFunction(&map, GL_LUMINANCE8_ALPHA8_EXT,  GL_UNSIGNED_BYTE,              LoadLA8ToRGBA8                       );
+    InsertLoadFunction(&map, GL_ALPHA32F_EXT,           GL_FLOAT,                      LoadA32FToRGBA32F                    );
+    InsertLoadFunction(&map, GL_LUMINANCE32F_EXT,       GL_FLOAT,                      LoadL32FToRGBA32F                    );
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA32F_EXT, GL_FLOAT,                      LoadLA32FToRGBA32F                   );
+    InsertLoadFunction(&map, GL_ALPHA16F_EXT,           GL_HALF_FLOAT,                 LoadA16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_ALPHA16F_EXT,           GL_HALF_FLOAT_OES,             LoadA16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_LUMINANCE16F_EXT,       GL_HALF_FLOAT,                 LoadL16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_LUMINANCE16F_EXT,       GL_HALF_FLOAT_OES,             LoadL16FToRGBA16F                    );
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA16F_EXT, GL_HALF_FLOAT,                 LoadLA16FToRGBA16F                   );
+    InsertLoadFunction(&map, GL_LUMINANCE_ALPHA16F_EXT, GL_HALF_FLOAT_OES,             LoadLA16FToRGBA16F                   );
+
+    // From GL_ANGLE_depth_texture
+    InsertLoadFunction(&map, GL_DEPTH_COMPONENT32_OES,  GL_UNSIGNED_INT,               LoadR32ToR24G8                       );
+
+    // From GL_EXT_texture_format_BGRA8888
+    InsertLoadFunction(&map, GL_BGRA8_EXT,              GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>         );
+    InsertLoadFunction(&map, GL_BGRA4_ANGLEX,           GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT, LoadRGBA4ToRGBA8                 );
+    InsertLoadFunction(&map, GL_BGRA4_ANGLEX,           GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>         );
+    InsertLoadFunction(&map, GL_BGR5_A1_ANGLEX,         GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT, LoadRGB5A1ToRGBA8                );
+    InsertLoadFunction(&map, GL_BGR5_A1_ANGLEX,         GL_UNSIGNED_BYTE,                  LoadToNative<GLubyte, 4>         );
+
+    // Compressed formats
+    // From ES 3.0.1 spec, table 3.16
+    //                      | Internal format                             | Type            | Load function                  |
+    InsertLoadFunction(&map, GL_COMPRESSED_R11_EAC,                        GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_R11_EAC,                        GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_SIGNED_R11_EAC,                 GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_RG11_EAC,                       GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_SIGNED_RG11_EAC,                GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_RGB8_ETC2,                      GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_SRGB8_ETC2,                     GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2,  GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2, GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_RGBA8_ETC2_EAC,                 GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+    InsertLoadFunction(&map, GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC,          GL_UNSIGNED_BYTE, UnimplementedLoadFunction       );
+
+    // From GL_EXT_texture_compression_dxt1
+    InsertLoadFunction(&map, GL_COMPRESSED_RGB_S3TC_DXT1_EXT,              GL_UNSIGNED_BYTE, LoadCompressedToNative<4, 4,  8>);
+    InsertLoadFunction(&map, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,             GL_UNSIGNED_BYTE, LoadCompressedToNative<4, 4,  8>);
+
+    // From GL_ANGLE_texture_compression_dxt3
+    InsertLoadFunction(&map, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE,           GL_UNSIGNED_BYTE, LoadCompressedToNative<4, 4, 16>);
+
+    // From GL_ANGLE_texture_compression_dxt5
+    InsertLoadFunction(&map, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE,           GL_UNSIGNED_BYTE, LoadCompressedToNative<4, 4, 16>);
+
+    return map;
+}
+
+// For sized GL internal formats, there is only one corresponding D3D11 format. This map type allows
+// querying for the DXGI texture formats to use for textures, SRVs, RTVs and DSVs given a GL internal
+// format.
+typedef std::map<GLenum, TextureFormat> D3D11ES3FormatMap;
+
+TextureFormat::TextureFormat()
+    : texFormat(DXGI_FORMAT_UNKNOWN),
+      srvFormat(DXGI_FORMAT_UNKNOWN),
+      rtvFormat(DXGI_FORMAT_UNKNOWN),
+      dsvFormat(DXGI_FORMAT_UNKNOWN),
+      renderFormat(DXGI_FORMAT_UNKNOWN),
+      swizzleTexFormat(DXGI_FORMAT_UNKNOWN),
+      swizzleSRVFormat(DXGI_FORMAT_UNKNOWN),
+      swizzleRTVFormat(DXGI_FORMAT_UNKNOWN),
+      dataInitializerFunction(NULL),
+      loadFunctions()
+{
+}
+
+static inline void InsertD3D11FormatInfo(D3D11ES3FormatMap *map, GLenum internalFormat, DXGI_FORMAT texFormat,
+                                         DXGI_FORMAT srvFormat, DXGI_FORMAT rtvFormat, DXGI_FORMAT dsvFormat)
+{
+    TextureFormat info;
+    info.texFormat = texFormat;
+    info.srvFormat = srvFormat;
+    info.rtvFormat = rtvFormat;
+    info.dsvFormat = dsvFormat;
+
+    // Given a GL internal format, the renderFormat is the DSV format if it is depth- or stencil-renderable,
+    // the RTV format if it is color-renderable, and the (nonrenderable) texture format otherwise.
+    if (dsvFormat != DXGI_FORMAT_UNKNOWN)
+    {
+        info.renderFormat = dsvFormat;
+    }
+    else if (rtvFormat != DXGI_FORMAT_UNKNOWN)
+    {
+        info.renderFormat = rtvFormat;
+    }
+    else if (texFormat != DXGI_FORMAT_UNKNOWN)
+    {
+        info.renderFormat = texFormat;
+    }
+    else
+    {
+        info.renderFormat = DXGI_FORMAT_UNKNOWN;
+    }
+
+    // Compute the swizzle formats
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+    if (internalFormat != GL_NONE && formatInfo.pixelBytes > 0)
+    {
+        if (formatInfo.componentCount != 4 || texFormat == DXGI_FORMAT_UNKNOWN ||
+            srvFormat == DXGI_FORMAT_UNKNOWN || rtvFormat == DXGI_FORMAT_UNKNOWN)
+        {
+            // Get the maximum sized component
+            unsigned int maxBits = 1;
+            if (formatInfo.compressed)
+            {
+                unsigned int compressedBitsPerBlock = formatInfo.pixelBytes * 8;
+                unsigned int blockSize = formatInfo.compressedBlockWidth * formatInfo.compressedBlockHeight;
+                maxBits = std::max(compressedBitsPerBlock / blockSize, maxBits);
+            }
+            else
+            {
+                maxBits = std::max(maxBits, formatInfo.alphaBits);
+                maxBits = std::max(maxBits, formatInfo.redBits);
+                maxBits = std::max(maxBits, formatInfo.greenBits);
+                maxBits = std::max(maxBits, formatInfo.blueBits);
+                maxBits = std::max(maxBits, formatInfo.luminanceBits);
+                maxBits = std::max(maxBits, formatInfo.depthBits);
+            }
+
+            maxBits = roundUp(maxBits, 8U);
+
+            static const SwizzleInfoMap swizzleMap = BuildSwizzleInfoMap();
+            SwizzleInfoMap::const_iterator swizzleIter = swizzleMap.find(SwizzleSizeType(maxBits, formatInfo.componentType));
+            ASSERT(swizzleIter != swizzleMap.end());
+
+            const SwizzleFormatInfo &swizzleInfo = swizzleIter->second;
+            info.swizzleTexFormat = swizzleInfo.mTexFormat;
+            info.swizzleSRVFormat = swizzleInfo.mSRVFormat;
+            info.swizzleRTVFormat = swizzleInfo.mRTVFormat;
+        }
+        else
+        {
+            // The original texture format is suitable for swizzle operations
+            info.swizzleTexFormat = texFormat;
+            info.swizzleSRVFormat = srvFormat;
+            info.swizzleRTVFormat = rtvFormat;
+        }
+    }
+    else
+    {
+        // Not possible to swizzle with this texture format since it is either unsized or GL_NONE
+        info.swizzleTexFormat = DXGI_FORMAT_UNKNOWN;
+        info.swizzleSRVFormat = DXGI_FORMAT_UNKNOWN;
+        info.swizzleRTVFormat = DXGI_FORMAT_UNKNOWN;
+    }
+
+    // Check if there is an initialization function for this texture format
+    static const InternalFormatInitializerMap initializerMap = BuildInternalFormatInitializerMap();
+    InternalFormatInitializerMap::const_iterator initializerIter = initializerMap.find(internalFormat);
+    info.dataInitializerFunction = (initializerIter != initializerMap.end()) ? initializerIter->second : NULL;
+
+    // Gather all the load functions for this internal format
+    static const D3D11LoadFunctionMap loadFunctions = BuildD3D11LoadFunctionMap();
+    D3D11LoadFunctionMap::const_iterator loadFunctionIter = loadFunctions.find(internalFormat);
+    if (loadFunctionIter != loadFunctions.end())
+    {
+        const std::vector<TypeLoadFunctionPair> &loadFunctionVector = loadFunctionIter->second;
+        for (size_t i = 0; i < loadFunctionVector.size(); i++)
+        {
+            GLenum type = loadFunctionVector[i].first;
+            LoadImageFunction function = loadFunctionVector[i].second;
+            info.loadFunctions.insert(std::make_pair(type, function));
+        }
+    }
+
+    map->insert(std::make_pair(internalFormat, info));
+}
+
+static D3D11ES3FormatMap BuildD3D11FormatMap()
+{
+    D3D11ES3FormatMap map;
+
+    //                         | GL internal format  | D3D11 texture format            | D3D11 SRV format               | D3D11 RTV format               | D3D11 DSV format   |
+    InsertD3D11FormatInfo(&map, GL_NONE,              DXGI_FORMAT_UNKNOWN,              DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R8,                DXGI_FORMAT_R8_UNORM,             DXGI_FORMAT_R8_UNORM,            DXGI_FORMAT_R8_UNORM,            DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R8_SNORM,          DXGI_FORMAT_R8_SNORM,             DXGI_FORMAT_R8_SNORM,            DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG8,               DXGI_FORMAT_R8G8_UNORM,           DXGI_FORMAT_R8G8_UNORM,          DXGI_FORMAT_R8G8_UNORM,          DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG8_SNORM,         DXGI_FORMAT_R8G8_SNORM,           DXGI_FORMAT_R8G8_SNORM,          DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB8,              DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB8_SNORM,        DXGI_FORMAT_R8G8B8A8_SNORM,       DXGI_FORMAT_R8G8B8A8_SNORM,      DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB565,            DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA4,             DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB5_A1,           DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA8,             DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA8_SNORM,       DXGI_FORMAT_R8G8B8A8_SNORM,       DXGI_FORMAT_R8G8B8A8_SNORM,      DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB10_A2,          DXGI_FORMAT_R10G10B10A2_UNORM,    DXGI_FORMAT_R10G10B10A2_UNORM,   DXGI_FORMAT_R10G10B10A2_UNORM,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB10_A2UI,        DXGI_FORMAT_R10G10B10A2_UINT,     DXGI_FORMAT_R10G10B10A2_UINT,    DXGI_FORMAT_R10G10B10A2_UINT,    DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_SRGB8,             DXGI_FORMAT_R8G8B8A8_UNORM_SRGB,  DXGI_FORMAT_R8G8B8A8_UNORM_SRGB, DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_SRGB8_ALPHA8,      DXGI_FORMAT_R8G8B8A8_UNORM_SRGB,  DXGI_FORMAT_R8G8B8A8_UNORM_SRGB, DXGI_FORMAT_R8G8B8A8_UNORM_SRGB, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R16F,              DXGI_FORMAT_R16_FLOAT,            DXGI_FORMAT_R16_FLOAT,           DXGI_FORMAT_R16_FLOAT,           DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG16F,             DXGI_FORMAT_R16G16_FLOAT,         DXGI_FORMAT_R16G16_FLOAT,        DXGI_FORMAT_R16G16_FLOAT,        DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB16F,            DXGI_FORMAT_R16G16B16A16_FLOAT,   DXGI_FORMAT_R16G16B16A16_FLOAT,  DXGI_FORMAT_R16G16B16A16_FLOAT,  DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA16F,           DXGI_FORMAT_R16G16B16A16_FLOAT,   DXGI_FORMAT_R16G16B16A16_FLOAT,  DXGI_FORMAT_R16G16B16A16_FLOAT,  DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R32F,              DXGI_FORMAT_R32_FLOAT,            DXGI_FORMAT_R32_FLOAT,           DXGI_FORMAT_R32_FLOAT,           DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG32F,             DXGI_FORMAT_R32G32_FLOAT,         DXGI_FORMAT_R32G32_FLOAT,        DXGI_FORMAT_R32G32_FLOAT,        DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB32F,            DXGI_FORMAT_R32G32B32A32_FLOAT,   DXGI_FORMAT_R32G32B32A32_FLOAT,  DXGI_FORMAT_R32G32B32A32_FLOAT,  DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA32F,           DXGI_FORMAT_R32G32B32A32_FLOAT,   DXGI_FORMAT_R32G32B32A32_FLOAT,  DXGI_FORMAT_R32G32B32A32_FLOAT,  DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R11F_G11F_B10F,    DXGI_FORMAT_R11G11B10_FLOAT,      DXGI_FORMAT_R11G11B10_FLOAT,     DXGI_FORMAT_R11G11B10_FLOAT,     DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB9_E5,           DXGI_FORMAT_R9G9B9E5_SHAREDEXP,   DXGI_FORMAT_R9G9B9E5_SHAREDEXP,  DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R8I,               DXGI_FORMAT_R8_SINT,              DXGI_FORMAT_R8_SINT,             DXGI_FORMAT_R8_SINT,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R8UI,              DXGI_FORMAT_R8_UINT,              DXGI_FORMAT_R8_UINT,             DXGI_FORMAT_R8_UINT,             DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R16I,              DXGI_FORMAT_R16_SINT,             DXGI_FORMAT_R16_SINT,            DXGI_FORMAT_R16_SINT,            DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R16UI,             DXGI_FORMAT_R16_UINT,             DXGI_FORMAT_R16_UINT,            DXGI_FORMAT_R16_UINT,            DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R32I,              DXGI_FORMAT_R32_SINT,             DXGI_FORMAT_R32_SINT,            DXGI_FORMAT_R32_SINT,            DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_R32UI,             DXGI_FORMAT_R32_UINT,             DXGI_FORMAT_R32_UINT,            DXGI_FORMAT_R32_UINT,            DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG8I,              DXGI_FORMAT_R8G8_SINT,            DXGI_FORMAT_R8G8_SINT,           DXGI_FORMAT_R8G8_SINT,           DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG8UI,             DXGI_FORMAT_R8G8_UINT,            DXGI_FORMAT_R8G8_UINT,           DXGI_FORMAT_R8G8_UINT,           DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG16I,             DXGI_FORMAT_R16G16_SINT,          DXGI_FORMAT_R16G16_SINT,         DXGI_FORMAT_R16G16_SINT,         DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG16UI,            DXGI_FORMAT_R16G16_UINT,          DXGI_FORMAT_R16G16_UINT,         DXGI_FORMAT_R16G16_UINT,         DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG32I,             DXGI_FORMAT_R32G32_SINT,          DXGI_FORMAT_R32G32_SINT,         DXGI_FORMAT_R32G32_SINT,         DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RG32UI,            DXGI_FORMAT_R32G32_UINT,          DXGI_FORMAT_R32G32_UINT,         DXGI_FORMAT_R32G32_UINT,         DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB8I,             DXGI_FORMAT_R8G8B8A8_SINT,        DXGI_FORMAT_R8G8B8A8_SINT,       DXGI_FORMAT_R8G8B8A8_SINT,       DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB8UI,            DXGI_FORMAT_R8G8B8A8_UINT,        DXGI_FORMAT_R8G8B8A8_UINT,       DXGI_FORMAT_R8G8B8A8_UINT,       DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB16I,            DXGI_FORMAT_R16G16B16A16_SINT,    DXGI_FORMAT_R16G16B16A16_SINT,   DXGI_FORMAT_R16G16B16A16_SINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB16UI,           DXGI_FORMAT_R16G16B16A16_UINT,    DXGI_FORMAT_R16G16B16A16_UINT,   DXGI_FORMAT_R16G16B16A16_UINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB32I,            DXGI_FORMAT_R32G32B32A32_SINT,    DXGI_FORMAT_R32G32B32A32_SINT,   DXGI_FORMAT_R32G32B32A32_SINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB32UI,           DXGI_FORMAT_R32G32B32A32_UINT,    DXGI_FORMAT_R32G32B32A32_UINT,   DXGI_FORMAT_R32G32B32A32_UINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA8I,            DXGI_FORMAT_R8G8B8A8_SINT,        DXGI_FORMAT_R8G8B8A8_SINT,       DXGI_FORMAT_R8G8B8A8_SINT,       DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA8UI,           DXGI_FORMAT_R8G8B8A8_UINT,        DXGI_FORMAT_R8G8B8A8_UINT,       DXGI_FORMAT_R8G8B8A8_UINT,       DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA16I,           DXGI_FORMAT_R16G16B16A16_SINT,    DXGI_FORMAT_R16G16B16A16_SINT,   DXGI_FORMAT_R16G16B16A16_SINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA16UI,          DXGI_FORMAT_R16G16B16A16_UINT,    DXGI_FORMAT_R16G16B16A16_UINT,   DXGI_FORMAT_R16G16B16A16_UINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA32I,           DXGI_FORMAT_R32G32B32A32_SINT,    DXGI_FORMAT_R32G32B32A32_SINT,   DXGI_FORMAT_R32G32B32A32_SINT,   DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA32UI,          DXGI_FORMAT_R32G32B32A32_UINT,    DXGI_FORMAT_R32G32B32A32_UINT,   DXGI_FORMAT_R32G32B32A32_UINT,   DXGI_FORMAT_UNKNOWN);
+
+    // Unsized formats, TODO: Are types of float and half float allowed for the unsized types? Would it change the DXGI format?
+    InsertD3D11FormatInfo(&map, GL_ALPHA,             DXGI_FORMAT_A8_UNORM,             DXGI_FORMAT_A8_UNORM,            DXGI_FORMAT_A8_UNORM,            DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE,         DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE_ALPHA,   DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGB,               DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_RGBA,              DXGI_FORMAT_R8G8B8A8_UNORM,       DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_R8G8B8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_BGRA_EXT,          DXGI_FORMAT_B8G8R8A8_UNORM,       DXGI_FORMAT_B8G8R8A8_UNORM,      DXGI_FORMAT_B8G8R8A8_UNORM,      DXGI_FORMAT_UNKNOWN);
+
+    // From GL_EXT_texture_storage
+    //                           | GL internal format     | D3D11 texture format          | D3D11 SRV format                    | D3D11 RTV format              | D3D11 DSV format               |
+    InsertD3D11FormatInfo(&map, GL_ALPHA8_EXT,             DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE8_EXT,         DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_ALPHA32F_EXT,           DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE32F_EXT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_ALPHA16F_EXT,           DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_R16G16B16A16_FLOAT,       DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE16F_EXT,       DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_R16G16B16A16_FLOAT,       DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE8_ALPHA8_EXT,  DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE_ALPHA32F_EXT, DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_LUMINANCE_ALPHA16F_EXT, DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_R16G16B16A16_FLOAT,       DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_BGRA8_EXT,              DXGI_FORMAT_B8G8R8A8_UNORM,     DXGI_FORMAT_B8G8R8A8_UNORM,           DXGI_FORMAT_B8G8R8A8_UNORM,     DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_BGRA4_ANGLEX,           DXGI_FORMAT_B8G8R8A8_UNORM,     DXGI_FORMAT_B8G8R8A8_UNORM,           DXGI_FORMAT_B8G8R8A8_UNORM,     DXGI_FORMAT_UNKNOWN           );
+    InsertD3D11FormatInfo(&map, GL_BGR5_A1_ANGLEX,         DXGI_FORMAT_B8G8R8A8_UNORM,     DXGI_FORMAT_B8G8R8A8_UNORM,           DXGI_FORMAT_B8G8R8A8_UNORM,     DXGI_FORMAT_UNKNOWN           );
+
+    // Depth stencil formats
+    InsertD3D11FormatInfo(&map, GL_DEPTH_COMPONENT16,     DXGI_FORMAT_R16_TYPELESS,        DXGI_FORMAT_R16_UNORM,                DXGI_FORMAT_UNKNOWN,            DXGI_FORMAT_D16_UNORM         );
+    InsertD3D11FormatInfo(&map, GL_DEPTH_COMPONENT24,     DXGI_FORMAT_R24G8_TYPELESS,      DXGI_FORMAT_R24_UNORM_X8_TYPELESS,    DXGI_FORMAT_UNKNOWN,            DXGI_FORMAT_D24_UNORM_S8_UINT );
+    InsertD3D11FormatInfo(&map, GL_DEPTH_COMPONENT32F,    DXGI_FORMAT_R32_TYPELESS,        DXGI_FORMAT_R32_FLOAT,                DXGI_FORMAT_UNKNOWN,            DXGI_FORMAT_D32_FLOAT         );
+    InsertD3D11FormatInfo(&map, GL_DEPTH24_STENCIL8,      DXGI_FORMAT_R24G8_TYPELESS,      DXGI_FORMAT_R24_UNORM_X8_TYPELESS,    DXGI_FORMAT_UNKNOWN,            DXGI_FORMAT_D24_UNORM_S8_UINT );
+    InsertD3D11FormatInfo(&map, GL_DEPTH32F_STENCIL8,     DXGI_FORMAT_R32G8X24_TYPELESS,   DXGI_FORMAT_R32_FLOAT_X8X24_TYPELESS, DXGI_FORMAT_UNKNOWN,            DXGI_FORMAT_D32_FLOAT_S8X24_UINT);
+    InsertD3D11FormatInfo(&map, GL_STENCIL_INDEX8,        DXGI_FORMAT_R24G8_TYPELESS,      DXGI_FORMAT_X24_TYPELESS_G8_UINT,     DXGI_FORMAT_UNKNOWN,            DXGI_FORMAT_D24_UNORM_S8_UINT );
+
+    // From GL_ANGLE_depth_texture
+    // Since D3D11 doesn't have a D32_UNORM format, use D24S8 which has comparable precision and matches the ES3 format.
+    InsertD3D11FormatInfo(&map, GL_DEPTH_COMPONENT32_OES, DXGI_FORMAT_R24G8_TYPELESS,      DXGI_FORMAT_R24_UNORM_X8_TYPELESS,    DXGI_FORMAT_UNKNOWN,             DXGI_FORMAT_D24_UNORM_S8_UINT);
+
+    // Compressed formats, From ES 3.0.1 spec, table 3.16
+    //                           | GL internal format                        | D3D11 texture format | D3D11 SRV format     | D3D11 RTV format   | D3D11 DSV format  |
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_R11_EAC,                        DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_SIGNED_R11_EAC,                 DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RG11_EAC,                       DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_SIGNED_RG11_EAC,                DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGB8_ETC2,                      DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_SRGB8_ETC2,                     DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2,  DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2, DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGBA8_ETC2_EAC,                 DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC,          DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN,   DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+
+    // From GL_EXT_texture_compression_dxt1
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGB_S3TC_DXT1_EXT,              DXGI_FORMAT_BC1_UNORM, DXGI_FORMAT_BC1_UNORM, DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,             DXGI_FORMAT_BC1_UNORM, DXGI_FORMAT_BC1_UNORM, DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+
+    // From GL_ANGLE_texture_compression_dxt3
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE,           DXGI_FORMAT_BC2_UNORM, DXGI_FORMAT_BC2_UNORM, DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+
+    // From GL_ANGLE_texture_compression_dxt5
+    InsertD3D11FormatInfo(&map, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE,           DXGI_FORMAT_BC3_UNORM, DXGI_FORMAT_BC3_UNORM, DXGI_FORMAT_UNKNOWN, DXGI_FORMAT_UNKNOWN);
+
+    return map;
+}
+
+const TextureFormat &GetTextureFormatInfo(GLenum internalFormat)
+{
+    static const D3D11ES3FormatMap formatMap = BuildD3D11FormatMap();
+    D3D11ES3FormatMap::const_iterator iter = formatMap.find(internalFormat);
+    if (iter != formatMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const TextureFormat defaultInfo;
+        return defaultInfo;
+    }
+}
+
+typedef std::map<gl::VertexFormat, VertexFormat> D3D11VertexFormatInfoMap;
+typedef std::pair<gl::VertexFormat, VertexFormat> D3D11VertexFormatPair;
+
+VertexFormat::VertexFormat()
+    : conversionType(VERTEX_CONVERT_NONE),
+      nativeFormat(DXGI_FORMAT_UNKNOWN),
+      copyFunction(NULL)
+{
+}
+
+static void AddVertexFormatInfo(D3D11VertexFormatInfoMap *map, GLenum inputType, GLboolean normalized, GLuint componentCount,
+                                VertexConversionType conversionType, DXGI_FORMAT nativeFormat, VertexCopyFunction copyFunction)
+{
+    gl::VertexFormat inputFormat(inputType, normalized, componentCount, false);
+
+    VertexFormat info;
+    info.conversionType = conversionType;
+    info.nativeFormat = nativeFormat;
+    info.copyFunction = copyFunction;
+
+    map->insert(D3D11VertexFormatPair(inputFormat, info));
+}
+
+static void AddIntegerVertexFormatInfo(D3D11VertexFormatInfoMap *map, GLenum inputType, GLuint componentCount,
+                                       VertexConversionType conversionType, DXGI_FORMAT nativeFormat, VertexCopyFunction copyFunction)
+{
+    gl::VertexFormat inputFormat(inputType, GL_FALSE, componentCount, true);
+
+    VertexFormat info;
+    info.conversionType = conversionType;
+    info.nativeFormat = nativeFormat;
+    info.copyFunction = copyFunction;
+
+    map->insert(D3D11VertexFormatPair(inputFormat, info));
+}
+
+static D3D11VertexFormatInfoMap BuildD3D11VertexFormatInfoMap()
+{
+    D3D11VertexFormatInfoMap map;
+
+    // TODO: column legend
+
+    //
+    // Float formats
+    //
+
+    // GL_BYTE -- un-normalized
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_FALSE, 1, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R8_SINT,            &CopyNativeVertexData<GLbyte, 1, 0>);
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_FALSE, 2, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R8G8_SINT,          &CopyNativeVertexData<GLbyte, 2, 0>);
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_FALSE, 3, VERTEX_CONVERT_BOTH, DXGI_FORMAT_R8G8B8A8_SINT,      &CopyNativeVertexData<GLbyte, 3, 1>);
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_FALSE, 4, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R8G8B8A8_SINT,      &CopyNativeVertexData<GLbyte, 4, 0>);
+
+    // GL_BYTE -- normalized
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_TRUE,  1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R8_SNORM,           &CopyNativeVertexData<GLbyte, 1, 0>);
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_TRUE,  2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R8G8_SNORM,         &CopyNativeVertexData<GLbyte, 2, 0>);
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_TRUE,  3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R8G8B8A8_SNORM,     &CopyNativeVertexData<GLbyte, 3, INT8_MAX>);
+    AddVertexFormatInfo(&map, GL_BYTE,           GL_TRUE,  4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R8G8B8A8_SNORM,     &CopyNativeVertexData<GLbyte, 4, 0>);
+
+    // GL_UNSIGNED_BYTE -- un-normalized
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_FALSE, 1, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R8_UINT,            &CopyNativeVertexData<GLubyte, 1, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_FALSE, 2, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R8G8_UINT,          &CopyNativeVertexData<GLubyte, 2, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_FALSE, 3, VERTEX_CONVERT_BOTH, DXGI_FORMAT_R8G8B8A8_UINT,      &CopyNativeVertexData<GLubyte, 3, 1>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_FALSE, 4, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R8G8B8A8_UINT,      &CopyNativeVertexData<GLubyte, 4, 0>);
+
+    // GL_UNSIGNED_BYTE -- normalized
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_TRUE,  1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R8_UNORM,           &CopyNativeVertexData<GLubyte, 1, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_TRUE,  2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R8G8_UNORM,         &CopyNativeVertexData<GLubyte, 2, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_TRUE,  3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R8G8B8A8_UNORM,     &CopyNativeVertexData<GLubyte, 3, UINT8_MAX>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  GL_TRUE,  4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R8G8B8A8_UNORM,     &CopyNativeVertexData<GLubyte, 4, 0>);
+
+    // GL_SHORT -- un-normalized
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_FALSE, 1, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R16_SINT,           &CopyNativeVertexData<GLshort, 1, 0>);
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_FALSE, 2, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R16G16_SINT,        &CopyNativeVertexData<GLshort, 2, 0>);
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_FALSE, 3, VERTEX_CONVERT_BOTH, DXGI_FORMAT_R16G16B16A16_SINT,  &CopyNativeVertexData<GLshort, 4, 1>);
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_FALSE, 4, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R16G16B16A16_SINT,  &CopyNativeVertexData<GLshort, 4, 0>);
+
+    // GL_SHORT -- normalized
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_TRUE,  1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16_SNORM,          &CopyNativeVertexData<GLshort, 1, 0>);
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_TRUE,  2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16G16_SNORM,       &CopyNativeVertexData<GLshort, 2, 0>);
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_TRUE,  3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R16G16B16A16_SNORM, &CopyNativeVertexData<GLshort, 3, INT16_MAX>);
+    AddVertexFormatInfo(&map, GL_SHORT,          GL_TRUE,  4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16G16B16A16_SNORM, &CopyNativeVertexData<GLshort, 4, 0>);
+
+    // GL_UNSIGNED_SHORT -- un-normalized
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_FALSE, 1, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R16_UINT,           &CopyNativeVertexData<GLushort, 1, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_FALSE, 2, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R16G16_UINT,        &CopyNativeVertexData<GLushort, 2, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_FALSE, 3, VERTEX_CONVERT_BOTH, DXGI_FORMAT_R16G16B16A16_UINT,  &CopyNativeVertexData<GLushort, 3, 1>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_FALSE, 4, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R16G16B16A16_UINT,  &CopyNativeVertexData<GLushort, 4, 0>);
+
+    // GL_UNSIGNED_SHORT -- normalized
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_TRUE,  1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16_UNORM,          &CopyNativeVertexData<GLushort, 1, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_TRUE,  2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16G16_UNORM,       &CopyNativeVertexData<GLushort, 2, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_TRUE,  3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R16G16B16A16_UNORM, &CopyNativeVertexData<GLushort, 3, UINT16_MAX>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_SHORT, GL_TRUE,  4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16G16B16A16_UNORM, &CopyNativeVertexData<GLushort, 4, 0>);
+
+    // GL_INT -- un-normalized
+    AddVertexFormatInfo(&map, GL_INT,            GL_FALSE, 1, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32_SINT,           &CopyNativeVertexData<GLint, 1, 0>);
+    AddVertexFormatInfo(&map, GL_INT,            GL_FALSE, 2, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32G32_SINT,        &CopyNativeVertexData<GLint, 2, 0>);
+    AddVertexFormatInfo(&map, GL_INT,            GL_FALSE, 3, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32G32B32_SINT,     &CopyNativeVertexData<GLint, 3, 0>);
+    AddVertexFormatInfo(&map, GL_INT,            GL_FALSE, 4, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32G32B32A32_SINT,  &CopyNativeVertexData<GLint, 4, 0>);
+
+    // GL_INT -- normalized
+    AddVertexFormatInfo(&map, GL_INT,            GL_TRUE,  1, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32_FLOAT,          &CopyTo32FVertexData<GLint, 1, true>);
+    AddVertexFormatInfo(&map, GL_INT,            GL_TRUE,  2, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32_FLOAT,       &CopyTo32FVertexData<GLint, 2, true>);
+    AddVertexFormatInfo(&map, GL_INT,            GL_TRUE,  3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32_FLOAT,    &CopyTo32FVertexData<GLint, 3, true>);
+    AddVertexFormatInfo(&map, GL_INT,            GL_TRUE,  4, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32A32_FLOAT, &CopyTo32FVertexData<GLint, 4, true>);
+
+    // GL_UNSIGNED_INT -- un-normalized
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_FALSE, 1, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32_UINT,           &CopyNativeVertexData<GLuint, 1, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_FALSE, 2, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32G32_UINT,        &CopyNativeVertexData<GLuint, 2, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_FALSE, 3, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32G32B32_UINT,     &CopyNativeVertexData<GLuint, 3, 0>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_FALSE, 4, VERTEX_CONVERT_GPU,  DXGI_FORMAT_R32G32B32A32_UINT,  &CopyNativeVertexData<GLuint, 4, 0>);
+
+    // GL_UNSIGNED_INT -- normalized
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_TRUE,  1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32_FLOAT,          &CopyTo32FVertexData<GLuint, 1, true>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_TRUE,  2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32G32_FLOAT,       &CopyTo32FVertexData<GLuint, 2, true>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_TRUE,  3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32_FLOAT,    &CopyTo32FVertexData<GLuint, 3, true>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT,   GL_TRUE,  4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32G32B32A32_FLOAT, &CopyTo32FVertexData<GLuint, 4, true>);
+
+    // GL_FIXED
+    AddVertexFormatInfo(&map, GL_FIXED,          GL_FALSE, 1, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32_FLOAT,          &Copy32FixedTo32FVertexData<1>);
+    AddVertexFormatInfo(&map, GL_FIXED,          GL_FALSE, 2, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32_FLOAT,       &Copy32FixedTo32FVertexData<2>);
+    AddVertexFormatInfo(&map, GL_FIXED,          GL_FALSE, 3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32_FLOAT,    &Copy32FixedTo32FVertexData<3>);
+    AddVertexFormatInfo(&map, GL_FIXED,          GL_FALSE, 4, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32A32_FLOAT, &Copy32FixedTo32FVertexData<4>);
+
+    // GL_HALF_FLOAT
+    AddVertexFormatInfo(&map, GL_HALF_FLOAT,     GL_FALSE, 1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16_FLOAT,          &CopyNativeVertexData<GLhalf, 1, 0>);
+    AddVertexFormatInfo(&map, GL_HALF_FLOAT,     GL_FALSE, 2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16G16_FLOAT,       &CopyNativeVertexData<GLhalf, 2, 0>);
+    AddVertexFormatInfo(&map, GL_HALF_FLOAT,     GL_FALSE, 3, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R16G16B16A16_FLOAT, &CopyNativeVertexData<GLhalf, 3, gl::Float16One>);
+    AddVertexFormatInfo(&map, GL_HALF_FLOAT,     GL_FALSE, 4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R16G16B16A16_FLOAT, &CopyNativeVertexData<GLhalf, 4, 0>);
+
+    // GL_FLOAT
+    AddVertexFormatInfo(&map, GL_FLOAT,          GL_FALSE, 1, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32_FLOAT,          &CopyNativeVertexData<GLfloat, 1, 0>);
+    AddVertexFormatInfo(&map, GL_FLOAT,          GL_FALSE, 2, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32G32_FLOAT,       &CopyNativeVertexData<GLfloat, 2, 0>);
+    AddVertexFormatInfo(&map, GL_FLOAT,          GL_FALSE, 3, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32G32B32_FLOAT,    &CopyNativeVertexData<GLfloat, 3, 0>);
+    AddVertexFormatInfo(&map, GL_FLOAT,          GL_FALSE, 4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R32G32B32A32_FLOAT, &CopyNativeVertexData<GLfloat, 4, 0>);
+
+    // GL_INT_2_10_10_10_REV
+    AddVertexFormatInfo(&map, GL_INT_2_10_10_10_REV,          GL_FALSE,  4, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32A32_FLOAT, &CopyXYZ10W2ToXYZW32FVertexData<true, false, true>);
+    AddVertexFormatInfo(&map, GL_INT_2_10_10_10_REV,          GL_TRUE,   4, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32A32_FLOAT, &CopyXYZ10W2ToXYZW32FVertexData<true, true,  true>);
+
+    // GL_UNSIGNED_INT_2_10_10_10_REV
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT_2_10_10_10_REV, GL_FALSE,  4, VERTEX_CONVERT_CPU,  DXGI_FORMAT_R32G32B32A32_FLOAT, &CopyXYZ10W2ToXYZW32FVertexData<false, false, true>);
+    AddVertexFormatInfo(&map, GL_UNSIGNED_INT_2_10_10_10_REV, GL_TRUE,   4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R10G10B10A2_UNORM,  &CopyNativeVertexData<GLuint, 1, 0>);
+
+    //
+    // Integer Formats
+    //
+
+    // GL_BYTE
+    AddIntegerVertexFormatInfo(&map, GL_BYTE,           1, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R8_SINT,           &CopyNativeVertexData<GLbyte, 1, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_BYTE,           2, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R8G8_SINT,         &CopyNativeVertexData<GLbyte, 2, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_BYTE,           3, VERTEX_CONVERT_CPU,   DXGI_FORMAT_R8G8B8A8_SINT,     &CopyNativeVertexData<GLbyte, 3, 1>);
+    AddIntegerVertexFormatInfo(&map, GL_BYTE,           4, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R8G8B8A8_SINT,     &CopyNativeVertexData<GLbyte, 4, 0>);
+
+    // GL_UNSIGNED_BYTE
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  1, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R8_UINT,           &CopyNativeVertexData<GLubyte, 1, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  2, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R8G8_UINT,         &CopyNativeVertexData<GLubyte, 2, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  3, VERTEX_CONVERT_CPU,   DXGI_FORMAT_R8G8B8A8_UINT,     &CopyNativeVertexData<GLubyte, 3, 1>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_BYTE,  4, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R8G8B8A8_UINT,     &CopyNativeVertexData<GLubyte, 4, 0>);
+
+    // GL_SHORT
+    AddIntegerVertexFormatInfo(&map, GL_SHORT,          1, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R16_SINT,          &CopyNativeVertexData<GLshort, 1, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_SHORT,          2, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R16G16_SINT,       &CopyNativeVertexData<GLshort, 2, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_SHORT,          3, VERTEX_CONVERT_CPU,   DXGI_FORMAT_R16G16B16A16_SINT, &CopyNativeVertexData<GLshort, 3, 1>);
+    AddIntegerVertexFormatInfo(&map, GL_SHORT,          4, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R16G16B16A16_SINT, &CopyNativeVertexData<GLshort, 4, 0>);
+
+    // GL_UNSIGNED_SHORT
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_SHORT, 1, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R16_UINT,          &CopyNativeVertexData<GLushort, 1, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_SHORT, 2, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R16G16_UINT,       &CopyNativeVertexData<GLushort, 2, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_SHORT, 3, VERTEX_CONVERT_CPU,   DXGI_FORMAT_R16G16B16A16_UINT, &CopyNativeVertexData<GLushort, 3, 1>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_SHORT, 4, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R16G16B16A16_UINT, &CopyNativeVertexData<GLushort, 4, 0>);
+
+    // GL_INT
+    AddIntegerVertexFormatInfo(&map, GL_INT,            1, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32_SINT,          &CopyNativeVertexData<GLint, 1, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_INT,            2, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32G32_SINT,       &CopyNativeVertexData<GLint, 2, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_INT,            3, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32G32B32_SINT,    &CopyNativeVertexData<GLint, 3, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_INT,            4, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32G32B32A32_SINT, &CopyNativeVertexData<GLint, 4, 0>);
+
+    // GL_UNSIGNED_INT
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_INT,   1, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32_SINT,          &CopyNativeVertexData<GLuint, 1, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_INT,   2, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32G32_SINT,       &CopyNativeVertexData<GLuint, 2, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_INT,   3, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32G32B32_SINT,    &CopyNativeVertexData<GLuint, 3, 0>);
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_INT,   4, VERTEX_CONVERT_NONE,  DXGI_FORMAT_R32G32B32A32_SINT, &CopyNativeVertexData<GLuint, 4, 0>);
+
+    // GL_INT_2_10_10_10_REV
+    AddIntegerVertexFormatInfo(&map, GL_INT_2_10_10_10_REV, 4, VERTEX_CONVERT_CPU, DXGI_FORMAT_R16G16B16A16_SINT, &CopyXYZ10W2ToXYZW32FVertexData<true, true, false>);
+
+    // GL_UNSIGNED_INT_2_10_10_10_REV
+    AddIntegerVertexFormatInfo(&map, GL_UNSIGNED_INT_2_10_10_10_REV, 4, VERTEX_CONVERT_NONE, DXGI_FORMAT_R10G10B10A2_UINT, &CopyNativeVertexData<GLuint, 1, 0>);
+
+    return map;
+}
+
+const VertexFormat &GetVertexFormatInfo(const gl::VertexFormat &vertexFormat)
+{
+    static const D3D11VertexFormatInfoMap vertexFormatMap = BuildD3D11VertexFormatInfoMap();
+
+    D3D11VertexFormatInfoMap::const_iterator iter = vertexFormatMap.find(vertexFormat);
+    if (iter != vertexFormatMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const VertexFormat defaultInfo;
+        return defaultInfo;
+    }
+}
+
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.h
new file mode 100644
index 0000000000..ea11aaa74c
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.h
@@ -0,0 +1,84 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// formatutils11.h: Queries for GL image formats and their translations to D3D11
+// formats.
+
+#ifndef LIBGLESV2_RENDERER_FORMATUTILS11_H_
+#define LIBGLESV2_RENDERER_FORMATUTILS11_H_
+
+#include "libGLESv2/formatutils.h"
+
+#include <map>
+
+namespace rx
+{
+
+namespace d3d11
+{
+
+typedef std::map<std::pair<GLenum, GLenum>, ColorCopyFunction> FastCopyFunctionMap;
+
+struct DXGIFormat
+{
+    DXGIFormat();
+
+    GLuint pixelBytes;
+    GLuint blockWidth;
+    GLuint blockHeight;
+
+    GLuint depthBits;
+    GLuint depthOffset;
+    GLuint stencilBits;
+    GLuint stencilOffset;
+
+    GLenum internalFormat;
+    GLenum componentType;
+
+    MipGenerationFunction mipGenerationFunction;
+    ColorReadFunction colorReadFunction;
+
+    FastCopyFunctionMap fastCopyFunctions;
+    ColorCopyFunction getFastCopyFunction(GLenum format, GLenum type) const;
+};
+const DXGIFormat &GetDXGIFormatInfo(DXGI_FORMAT format);
+
+struct TextureFormat
+{
+    TextureFormat();
+
+    DXGI_FORMAT texFormat;
+    DXGI_FORMAT srvFormat;
+    DXGI_FORMAT rtvFormat;
+    DXGI_FORMAT dsvFormat;
+    DXGI_FORMAT renderFormat;
+
+    DXGI_FORMAT swizzleTexFormat;
+    DXGI_FORMAT swizzleSRVFormat;
+    DXGI_FORMAT swizzleRTVFormat;
+
+    InitializeTextureDataFunction dataInitializerFunction;
+
+    typedef std::map<GLenum, LoadImageFunction> LoadFunctionMap;
+    LoadFunctionMap loadFunctions;
+};
+const TextureFormat &GetTextureFormatInfo(GLenum internalFormat);
+
+struct VertexFormat
+{
+    VertexFormat();
+
+    VertexConversionType conversionType;
+    DXGI_FORMAT nativeFormat;
+    VertexCopyFunction copyFunction;
+};
+const VertexFormat &GetVertexFormatInfo(const gl::VertexFormat &vertexFormat);
+
+}
+
+}
+
+#endif // LIBGLESV2_RENDERER_FORMATUTILS11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
new file mode 100644
index 0000000000..2af97e73f0
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
@@ -0,0 +1,1216 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// renderer11_utils.cpp: Conversion functions and other utility routines
+// specific to the D3D11 renderer.
+
+#include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+#include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+#include "libGLESv2/renderer/d3d/d3d11/RenderTarget11.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/Framebuffer.h"
+
+#include "common/debug.h"
+
+#include <algorithm>
+
+#ifndef D3D_FL9_1_DEFAULT_MAX_ANISOTROPY
+#  define D3D_FL9_1_DEFAULT_MAX_ANISOTROPY 2
+#endif
+#ifndef D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT
+#  define D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT 1
+#endif
+#ifndef D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT
+#  define D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT 4
+#endif
+#ifndef D3D_FL9_1_IA_PRIMITIVE_MAX_COUNT
+#  define D3D_FL9_1_IA_PRIMITIVE_MAX_COUNT 65535
+#endif
+#ifndef D3D_FL9_2_IA_PRIMITIVE_MAX_COUNT
+#  define D3D_FL9_2_IA_PRIMITIVE_MAX_COUNT 1048575
+#endif
+#ifndef D3D_FL9_1_REQ_TEXTURECUBE_DIMENSION
+#  define D3D_FL9_1_REQ_TEXTURECUBE_DIMENSION 512
+#endif
+#ifndef D3D_FL9_3_REQ_TEXTURECUBE_DIMENSION
+#  define D3D_FL9_3_REQ_TEXTURECUBE_DIMENSION 4096
+#endif
+#ifndef D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION
+#  define D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION 2048
+#endif
+#ifndef D3D_FL9_1_REQ_TEXTURE3D_U_V_OR_W_DIMENSION
+#  define D3D_FL9_1_REQ_TEXTURE3D_U_V_OR_W_DIMENSION 256
+#endif
+#ifndef D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION
+#  define D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION 4096
+#endif
+#ifndef D3D11_REQ_TEXTURECUBE_DIMENSION
+#  define D3D11_REQ_TEXTURECUBE_DIMENSION 16384
+#endif
+#ifndef D3D11_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION
+#  define D3D11_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION 2048
+#endif
+#ifndef D3D11_REQ_TEXTURE3D_U_V_OR_W_DIMENSION
+#  define D3D11_REQ_TEXTURE3D_U_V_OR_W_DIMENSION 2048
+#endif
+#ifndef D3D11_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP
+#  define D3D11_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP 32
+#endif
+#ifndef D3D11_REQ_DRAW_VERTEX_COUNT_2_TO_EXP
+#  define D3D11_REQ_DRAW_VERTEX_COUNT_2_TO_EXP 32
+#endif
+#ifndef D3D10_1_STANDARD_VERTEX_ELEMENT_COUNT
+#  define D3D10_1_STANDARD_VERTEX_ELEMENT_COUNT 32
+#endif
+#ifndef D3D11_STANDARD_VERTEX_ELEMENT_COUNT
+#  define D3D11_STANDARD_VERTEX_ELEMENT_COUNT 32
+#endif
+#ifndef D3D10_1_SO_BUFFER_SLOT_COUNT
+#  define D3D10_1_SO_BUFFER_SLOT_COUNT 4
+#endif
+#ifndef D3D11_SO_BUFFER_SLOT_COUNT
+#  define D3D11_SO_BUFFER_SLOT_COUNT 4
+#endif
+#ifndef D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT
+#  define D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT 14
+#endif
+#ifndef D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT
+#  define D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT 16
+#endif
+#ifndef D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE
+#  define D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE -8
+#endif
+#ifndef D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE
+#  define D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE 7
+#endif
+#ifndef D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT
+#  define D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT 4096
+#endif
+#ifndef D3D11_PS_INPUT_REGISTER_COUNT
+#  define D3D11_PS_INPUT_REGISTER_COUNT 32
+#endif
+#ifndef D3D10_1_VS_OUTPUT_REGISTER_COUNT
+#  define D3D10_1_VS_OUTPUT_REGISTER_COUNT 32
+#endif
+#ifndef D3D11_VS_OUTPUT_REGISTER_COUNT
+#  define D3D11_VS_OUTPUT_REGISTER_COUNT 32
+#endif
+
+namespace rx
+{
+
+namespace gl_d3d11
+{
+
+D3D11_BLEND ConvertBlendFunc(GLenum glBlend, bool isAlpha)
+{
+    D3D11_BLEND d3dBlend = D3D11_BLEND_ZERO;
+
+    switch (glBlend)
+    {
+      case GL_ZERO:                     d3dBlend = D3D11_BLEND_ZERO;                break;
+      case GL_ONE:                      d3dBlend = D3D11_BLEND_ONE;                 break;
+      case GL_SRC_COLOR:                d3dBlend = (isAlpha ? D3D11_BLEND_SRC_ALPHA : D3D11_BLEND_SRC_COLOR);           break;
+      case GL_ONE_MINUS_SRC_COLOR:      d3dBlend = (isAlpha ? D3D11_BLEND_INV_SRC_ALPHA : D3D11_BLEND_INV_SRC_COLOR);   break;
+      case GL_DST_COLOR:                d3dBlend = (isAlpha ? D3D11_BLEND_DEST_ALPHA : D3D11_BLEND_DEST_COLOR);         break;
+      case GL_ONE_MINUS_DST_COLOR:      d3dBlend = (isAlpha ? D3D11_BLEND_INV_DEST_ALPHA : D3D11_BLEND_INV_DEST_COLOR); break;
+      case GL_SRC_ALPHA:                d3dBlend = D3D11_BLEND_SRC_ALPHA;           break;
+      case GL_ONE_MINUS_SRC_ALPHA:      d3dBlend = D3D11_BLEND_INV_SRC_ALPHA;       break;
+      case GL_DST_ALPHA:                d3dBlend = D3D11_BLEND_DEST_ALPHA;          break;
+      case GL_ONE_MINUS_DST_ALPHA:      d3dBlend = D3D11_BLEND_INV_DEST_ALPHA;      break;
+      case GL_CONSTANT_COLOR:           d3dBlend = D3D11_BLEND_BLEND_FACTOR;        break;
+      case GL_ONE_MINUS_CONSTANT_COLOR: d3dBlend = D3D11_BLEND_INV_BLEND_FACTOR;    break;
+      case GL_CONSTANT_ALPHA:           d3dBlend = D3D11_BLEND_BLEND_FACTOR;        break;
+      case GL_ONE_MINUS_CONSTANT_ALPHA: d3dBlend = D3D11_BLEND_INV_BLEND_FACTOR;    break;
+      case GL_SRC_ALPHA_SATURATE:       d3dBlend = D3D11_BLEND_SRC_ALPHA_SAT;       break;
+      default: UNREACHABLE();
+    }
+
+    return d3dBlend;
+}
+
+D3D11_BLEND_OP ConvertBlendOp(GLenum glBlendOp)
+{
+    D3D11_BLEND_OP d3dBlendOp = D3D11_BLEND_OP_ADD;
+
+    switch (glBlendOp)
+    {
+      case GL_FUNC_ADD:              d3dBlendOp = D3D11_BLEND_OP_ADD;           break;
+      case GL_FUNC_SUBTRACT:         d3dBlendOp = D3D11_BLEND_OP_SUBTRACT;      break;
+      case GL_FUNC_REVERSE_SUBTRACT: d3dBlendOp = D3D11_BLEND_OP_REV_SUBTRACT;  break;
+      case GL_MIN:                   d3dBlendOp = D3D11_BLEND_OP_MIN;           break;
+      case GL_MAX:                   d3dBlendOp = D3D11_BLEND_OP_MAX;           break;
+      default: UNREACHABLE();
+    }
+
+    return d3dBlendOp;
+}
+
+UINT8 ConvertColorMask(bool red, bool green, bool blue, bool alpha)
+{
+    UINT8 mask = 0;
+    if (red)
+    {
+        mask |= D3D11_COLOR_WRITE_ENABLE_RED;
+    }
+    if (green)
+    {
+        mask |= D3D11_COLOR_WRITE_ENABLE_GREEN;
+    }
+    if (blue)
+    {
+        mask |= D3D11_COLOR_WRITE_ENABLE_BLUE;
+    }
+    if (alpha)
+    {
+        mask |= D3D11_COLOR_WRITE_ENABLE_ALPHA;
+    }
+    return mask;
+}
+
+D3D11_CULL_MODE ConvertCullMode(bool cullEnabled, GLenum cullMode)
+{
+    D3D11_CULL_MODE cull = D3D11_CULL_NONE;
+
+    if (cullEnabled)
+    {
+        switch (cullMode)
+        {
+          case GL_FRONT:            cull = D3D11_CULL_FRONT;    break;
+          case GL_BACK:             cull = D3D11_CULL_BACK;     break;
+          case GL_FRONT_AND_BACK:   cull = D3D11_CULL_NONE;     break;
+          default: UNREACHABLE();
+        }
+    }
+    else
+    {
+        cull = D3D11_CULL_NONE;
+    }
+
+    return cull;
+}
+
+D3D11_COMPARISON_FUNC ConvertComparison(GLenum comparison)
+{
+    D3D11_COMPARISON_FUNC d3dComp = D3D11_COMPARISON_NEVER;
+    switch (comparison)
+    {
+      case GL_NEVER:    d3dComp = D3D11_COMPARISON_NEVER;           break;
+      case GL_ALWAYS:   d3dComp = D3D11_COMPARISON_ALWAYS;          break;
+      case GL_LESS:     d3dComp = D3D11_COMPARISON_LESS;            break;
+      case GL_LEQUAL:   d3dComp = D3D11_COMPARISON_LESS_EQUAL;      break;
+      case GL_EQUAL:    d3dComp = D3D11_COMPARISON_EQUAL;           break;
+      case GL_GREATER:  d3dComp = D3D11_COMPARISON_GREATER;         break;
+      case GL_GEQUAL:   d3dComp = D3D11_COMPARISON_GREATER_EQUAL;   break;
+      case GL_NOTEQUAL: d3dComp = D3D11_COMPARISON_NOT_EQUAL;       break;
+      default: UNREACHABLE();
+    }
+
+    return d3dComp;
+}
+
+D3D11_DEPTH_WRITE_MASK ConvertDepthMask(bool depthWriteEnabled)
+{
+    return depthWriteEnabled ? D3D11_DEPTH_WRITE_MASK_ALL : D3D11_DEPTH_WRITE_MASK_ZERO;
+}
+
+UINT8 ConvertStencilMask(GLuint stencilmask)
+{
+    return static_cast<UINT8>(stencilmask);
+}
+
+D3D11_STENCIL_OP ConvertStencilOp(GLenum stencilOp)
+{
+    D3D11_STENCIL_OP d3dStencilOp = D3D11_STENCIL_OP_KEEP;
+
+    switch (stencilOp)
+    {
+      case GL_ZERO:      d3dStencilOp = D3D11_STENCIL_OP_ZERO;      break;
+      case GL_KEEP:      d3dStencilOp = D3D11_STENCIL_OP_KEEP;      break;
+      case GL_REPLACE:   d3dStencilOp = D3D11_STENCIL_OP_REPLACE;   break;
+      case GL_INCR:      d3dStencilOp = D3D11_STENCIL_OP_INCR_SAT;  break;
+      case GL_DECR:      d3dStencilOp = D3D11_STENCIL_OP_DECR_SAT;  break;
+      case GL_INVERT:    d3dStencilOp = D3D11_STENCIL_OP_INVERT;    break;
+      case GL_INCR_WRAP: d3dStencilOp = D3D11_STENCIL_OP_INCR;      break;
+      case GL_DECR_WRAP: d3dStencilOp = D3D11_STENCIL_OP_DECR;      break;
+      default: UNREACHABLE();
+    }
+
+    return d3dStencilOp;
+}
+
+D3D11_FILTER ConvertFilter(GLenum minFilter, GLenum magFilter, float maxAnisotropy, GLenum comparisonMode)
+{
+    bool comparison = comparisonMode != GL_NONE;
+
+    if (maxAnisotropy > 1.0f)
+    {
+        return D3D11_ENCODE_ANISOTROPIC_FILTER(static_cast<D3D11_COMPARISON_FUNC>(comparison));
+    }
+    else
+    {
+        D3D11_FILTER_TYPE dxMin = D3D11_FILTER_TYPE_POINT;
+        D3D11_FILTER_TYPE dxMip = D3D11_FILTER_TYPE_POINT;
+        switch (minFilter)
+        {
+          case GL_NEAREST:                dxMin = D3D11_FILTER_TYPE_POINT;  dxMip = D3D11_FILTER_TYPE_POINT;  break;
+          case GL_LINEAR:                 dxMin = D3D11_FILTER_TYPE_LINEAR; dxMip = D3D11_FILTER_TYPE_POINT;  break;
+          case GL_NEAREST_MIPMAP_NEAREST: dxMin = D3D11_FILTER_TYPE_POINT;  dxMip = D3D11_FILTER_TYPE_POINT;  break;
+          case GL_LINEAR_MIPMAP_NEAREST:  dxMin = D3D11_FILTER_TYPE_LINEAR; dxMip = D3D11_FILTER_TYPE_POINT;  break;
+          case GL_NEAREST_MIPMAP_LINEAR:  dxMin = D3D11_FILTER_TYPE_POINT;  dxMip = D3D11_FILTER_TYPE_LINEAR; break;
+          case GL_LINEAR_MIPMAP_LINEAR:   dxMin = D3D11_FILTER_TYPE_LINEAR; dxMip = D3D11_FILTER_TYPE_LINEAR; break;
+          default:                        UNREACHABLE();
+        }
+
+        D3D11_FILTER_TYPE dxMag = D3D11_FILTER_TYPE_POINT;
+        switch (magFilter)
+        {
+          case GL_NEAREST: dxMag = D3D11_FILTER_TYPE_POINT;  break;
+          case GL_LINEAR:  dxMag = D3D11_FILTER_TYPE_LINEAR; break;
+          default:         UNREACHABLE();
+        }
+
+        return D3D11_ENCODE_BASIC_FILTER(dxMin, dxMag, dxMip, static_cast<D3D11_COMPARISON_FUNC>(comparison));
+    }
+}
+
+D3D11_TEXTURE_ADDRESS_MODE ConvertTextureWrap(GLenum wrap)
+{
+    switch (wrap)
+    {
+      case GL_REPEAT:          return D3D11_TEXTURE_ADDRESS_WRAP;
+      case GL_CLAMP_TO_EDGE:   return D3D11_TEXTURE_ADDRESS_CLAMP;
+      case GL_MIRRORED_REPEAT: return D3D11_TEXTURE_ADDRESS_MIRROR;
+      default:                 UNREACHABLE();
+    }
+
+    return D3D11_TEXTURE_ADDRESS_WRAP;
+}
+
+D3D11_QUERY ConvertQueryType(GLenum queryType)
+{
+    switch (queryType)
+    {
+      case GL_ANY_SAMPLES_PASSED_EXT:
+      case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:   return D3D11_QUERY_OCCLUSION;
+      case GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN: return D3D11_QUERY_SO_STATISTICS;
+      default: UNREACHABLE();                        return D3D11_QUERY_EVENT;
+    }
+}
+
+}
+
+
+namespace d3d11_gl
+{
+
+static gl::TextureCaps GenerateTextureFormatCaps(GLenum internalFormat, ID3D11Device *device)
+{
+    gl::TextureCaps textureCaps;
+
+    const d3d11::TextureFormat &formatInfo = d3d11::GetTextureFormatInfo(internalFormat);
+
+    UINT formatSupport;
+    if (SUCCEEDED(device->CheckFormatSupport(formatInfo.texFormat, &formatSupport)))
+    {
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+        if (formatInfo.depthBits > 0 || formatInfo.stencilBits > 0)
+        {
+            textureCaps.texturable = ((formatSupport & D3D11_FORMAT_SUPPORT_TEXTURE2D) != 0);
+        }
+        else
+        {
+            textureCaps.texturable = ((formatSupport & D3D11_FORMAT_SUPPORT_TEXTURE2D) != 0) &&
+                                     ((formatSupport & D3D11_FORMAT_SUPPORT_TEXTURECUBE) != 0) &&
+                                     ((formatSupport & D3D11_FORMAT_SUPPORT_TEXTURE3D) != 0);
+        }
+    }
+
+    if (SUCCEEDED(device->CheckFormatSupport(formatInfo.renderFormat, &formatSupport)) &&
+        ((formatSupport & D3D11_FORMAT_SUPPORT_MULTISAMPLE_RENDERTARGET) != 0))
+    {
+        for (size_t sampleCount = 1; sampleCount <= D3D11_MAX_MULTISAMPLE_SAMPLE_COUNT; sampleCount++)
+        {
+            UINT qualityCount = 0;
+            if (SUCCEEDED(device->CheckMultisampleQualityLevels(formatInfo.renderFormat, sampleCount, &qualityCount)) &&
+                qualityCount > 0)
+            {
+                textureCaps.sampleCounts.insert(sampleCount);
+            }
+        }
+    }
+
+    textureCaps.filterable = SUCCEEDED(device->CheckFormatSupport(formatInfo.srvFormat, &formatSupport)) &&
+                             ((formatSupport & D3D11_FORMAT_SUPPORT_SHADER_SAMPLE)) != 0;
+    textureCaps.renderable = (SUCCEEDED(device->CheckFormatSupport(formatInfo.rtvFormat, &formatSupport)) &&
+                              ((formatSupport & D3D11_FORMAT_SUPPORT_RENDER_TARGET)) != 0) ||
+                             (SUCCEEDED(device->CheckFormatSupport(formatInfo.dsvFormat, &formatSupport)) &&
+                              ((formatSupport & D3D11_FORMAT_SUPPORT_DEPTH_STENCIL) != 0));
+
+    return textureCaps;
+}
+
+static bool GetNPOTTextureSupport(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return true;
+
+        // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476876.aspx
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return true; // Provided that mipmaps & wrap modes are not used
+
+      default: UNREACHABLE();      return false;
+    }
+}
+
+static float GetMaximumAnisotropy(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_MAX_MAXANISOTROPY;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_MAX_MAXANISOTROPY;
+
+        // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476876.aspx
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:  return 16;
+
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_DEFAULT_MAX_ANISOTROPY;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static bool GetOcclusionQuerySupport(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return true;
+
+        // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476150.aspx ID3D11Device::CreateQuery
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:  return true;
+      case D3D_FEATURE_LEVEL_9_1:  return false;
+
+      default: UNREACHABLE();      return false;
+    }
+}
+
+static bool GetEventQuerySupport(D3D_FEATURE_LEVEL featureLevel)
+{
+    // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476150.aspx ID3D11Device::CreateQuery
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0:
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return true;
+
+      default: UNREACHABLE();      return false;
+    }
+}
+
+static bool GetInstancingSupport(D3D_FEATURE_LEVEL featureLevel)
+{
+    // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476150.aspx ID3D11Device::CreateInputLayout
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0:
+      case D3D_FEATURE_LEVEL_9_3:  return true;
+
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return false;
+
+      default: UNREACHABLE();      return false;
+    }
+}
+
+static bool GetDerivativeInstructionSupport(D3D_FEATURE_LEVEL featureLevel)
+{
+    // http://msdn.microsoft.com/en-us/library/windows/desktop/bb509588.aspx states that shader model
+    // ps_2_x is required for the ddx (and other derivative functions).
+
+    // http://msdn.microsoft.com/en-us/library/windows/desktop/ff476876.aspx states that feature level
+    // 9.3 supports shader model ps_2_x.
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0:
+      case D3D_FEATURE_LEVEL_9_3:  return true;
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return false;
+
+      default: UNREACHABLE();      return false;
+    }
+}
+
+static size_t GetMaximumSimultaneousRenderTargets(D3D_FEATURE_LEVEL featureLevel)
+{
+    // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476150.aspx ID3D11Device::CreateInputLayout
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_SIMULTANEOUS_RENDER_TARGET_COUNT;
+
+      case D3D_FEATURE_LEVEL_9_3:  return D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT;
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximum2DTextureSize(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_9_3:  return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumCubeMapTextureSize(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURECUBE_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURECUBE_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_9_3:  return D3D_FL9_3_REQ_TEXTURECUBE_DIMENSION;
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_REQ_TEXTURECUBE_DIMENSION;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximum2DTextureArraySize(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximum3DTextureSize(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE3D_U_V_OR_W_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE3D_U_V_OR_W_DIMENSION;
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_REQ_TEXTURE3D_U_V_OR_W_DIMENSION;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumViewportSize(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_VIEWPORT_BOUNDS_MAX;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_VIEWPORT_BOUNDS_MAX;
+
+        // No constants for D3D9 viewport size limits, use the maximum texture sizes
+      case D3D_FEATURE_LEVEL_9_3:  return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumDrawIndexedIndexCount(D3D_FEATURE_LEVEL featureLevel)
+{
+    // D3D11 allows up to 2^32 elements, but we report max signed int for convenience since that's what's
+    // returned from glGetInteger
+    META_ASSERT(D3D11_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP == 32);
+    META_ASSERT(D3D10_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP == 32);
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return std::numeric_limits<GLint>::max();
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:  return D3D_FL9_2_IA_PRIMITIVE_MAX_COUNT;
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_IA_PRIMITIVE_MAX_COUNT;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumDrawVertexCount(D3D_FEATURE_LEVEL featureLevel)
+{
+    // D3D11 allows up to 2^32 elements, but we report max signed int for convenience since that's what's
+    // returned from glGetInteger
+    META_ASSERT(D3D11_REQ_DRAW_VERTEX_COUNT_2_TO_EXP == 32);
+    META_ASSERT(D3D10_REQ_DRAW_VERTEX_COUNT_2_TO_EXP == 32);
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return std::numeric_limits<GLint>::max();
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:  return D3D_FL9_2_IA_PRIMITIVE_MAX_COUNT;
+      case D3D_FEATURE_LEVEL_9_1:  return D3D_FL9_1_IA_PRIMITIVE_MAX_COUNT;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumVertexInputSlots(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_STANDARD_VERTEX_ELEMENT_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_STANDARD_VERTEX_ELEMENT_COUNT;
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_STANDARD_VERTEX_ELEMENT_COUNT;
+
+      // From http://http://msdn.microsoft.com/en-us/library/windows/desktop/ff476876.aspx "Max Input Slots"
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 16;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumVertexUniformVectors(D3D_FEATURE_LEVEL featureLevel)
+{
+    // TODO(geofflang): Remove hard-coded limit once the gl-uniform-arrays test can pass
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return 1024; // D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return 1024; // D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT;
+
+      // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476149.aspx ID3D11DeviceContext::VSSetConstantBuffers
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 255;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetReservedVertexUniformBuffers()
+{
+    // Reserve one buffer for the application uniforms, and one for driver uniforms
+    return 2;
+}
+
+static size_t GetMaximumVertexUniformBlocks(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT - GetReservedVertexUniformBuffers();
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT - GetReservedVertexUniformBuffers();
+
+      // Uniform blocks not supported in D3D9 feature levels
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetReservedVertexOutputVectors()
+{
+    // We potentially reserve varyings for gl_Position, dx_Position, gl_FragCoord and gl_PointSize
+    return 4;
+}
+
+static size_t GetMaximumVertexOutputVectors(D3D_FEATURE_LEVEL featureLevel)
+{
+    META_ASSERT(gl::IMPLEMENTATION_MAX_VARYING_VECTORS == D3D11_VS_OUTPUT_REGISTER_COUNT);
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_VS_OUTPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+
+      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_VS_OUTPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_VS_OUTPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+
+      // Use D3D9 SM3 and SM2 limits
+      case D3D_FEATURE_LEVEL_9_3:  return 10 - GetReservedVertexOutputVectors();
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 8 - GetReservedVertexOutputVectors();
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumVertexTextureUnits(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_COMMONSHADER_SAMPLER_SLOT_COUNT;
+
+      // Vertex textures not supported in D3D9 feature levels according to
+      // http://msdn.microsoft.com/en-us/library/windows/desktop/ff476149.aspx
+      // ID3D11DeviceContext::VSSetSamplers and ID3D11DeviceContext::VSSetShaderResources
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumPixelUniformVectors(D3D_FEATURE_LEVEL featureLevel)
+{
+    // TODO(geofflang): Remove hard-coded limit once the gl-uniform-arrays test can pass
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return 1024; // D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return 1024; // D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT;
+
+      // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476149.aspx ID3D11DeviceContext::PSSetConstantBuffers
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 32;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetReservedPixelUniformBuffers()
+{
+    // Reserve one buffer for the application uniforms, and one for driver uniforms
+    return 2;
+}
+
+static size_t GetMaximumPixelUniformBlocks(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT - GetReservedPixelUniformBuffers();
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT - GetReservedPixelUniformBuffers();
+
+      // Uniform blocks not supported in D3D9 feature levels
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumPixelInputVectors(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_PS_INPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_PS_INPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+
+      // Use D3D9 SM3 and SM2 limits
+      case D3D_FEATURE_LEVEL_9_3:  return 10 - GetReservedVertexOutputVectors();
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 8 - GetReservedVertexOutputVectors();
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumPixelTextureUnits(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_COMMONSHADER_SAMPLER_SLOT_COUNT;
+
+      // http://msdn.microsoft.com/en-us/library/windows/desktop/ff476149.aspx ID3D11DeviceContext::PSSetShaderResources
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 16;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static int GetMinimumTexelOffset(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE;
+
+      // Sampling functions with offsets are not available below shader model 4.0.
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static int GetMaximumTexelOffset(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE;
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE;
+
+      // Sampling functions with offsets are not available below shader model 4.0.
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumConstantBufferSize(D3D_FEATURE_LEVEL featureLevel)
+{
+    // Returns a size_t despite the limit being a GLuint64 because size_t is the maximum size of
+    // any buffer that could be allocated.
+
+    const size_t bytesPerComponent = 4 * sizeof(float);
+
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT * bytesPerComponent;
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT * bytesPerComponent;
+
+      // Limits from http://msdn.microsoft.com/en-us/library/windows/desktop/ff476501.aspx remarks section
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 4096 * bytesPerComponent;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumStreamOutputBuffers(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return D3D11_SO_BUFFER_SLOT_COUNT;
+
+      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SO_BUFFER_SLOT_COUNT;
+      case D3D_FEATURE_LEVEL_10_0: return D3D10_SO_BUFFER_SLOT_COUNT;
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumStreamOutputInterleavedComponenets(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0:
+
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return GetMaximumVertexOutputVectors(featureLevel) * 4;
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+static size_t GetMaximumStreamOutputSeparateCompeonents(D3D_FEATURE_LEVEL featureLevel)
+{
+    switch (featureLevel)
+    {
+#if _MSC_VER >= 1700
+      case D3D_FEATURE_LEVEL_11_1:
+#endif
+      case D3D_FEATURE_LEVEL_11_0: return GetMaximumStreamOutputInterleavedComponenets(featureLevel) /
+                                          GetMaximumStreamOutputBuffers(featureLevel);
+
+
+      // D3D 10 and 10.1 only allow one output per output slot if an output slot other than zero is used.
+      case D3D_FEATURE_LEVEL_10_1:
+      case D3D_FEATURE_LEVEL_10_0: return 4;
+
+      case D3D_FEATURE_LEVEL_9_3:
+      case D3D_FEATURE_LEVEL_9_2:
+      case D3D_FEATURE_LEVEL_9_1:  return 0;
+
+      default: UNREACHABLE();      return 0;
+    }
+}
+
+void GenerateCaps(ID3D11Device *device, gl::Caps *caps, gl::TextureCapsMap *textureCapsMap, gl::Extensions *extensions)
+{
+    GLuint maxSamples = 0;
+    const gl::FormatSet &allFormats = gl::GetAllSizedInternalFormats();
+    for (gl::FormatSet::const_iterator internalFormat = allFormats.begin(); internalFormat != allFormats.end(); ++internalFormat)
+    {
+        gl::TextureCaps textureCaps = GenerateTextureFormatCaps(*internalFormat, device);
+        textureCapsMap->insert(*internalFormat, textureCaps);
+
+        maxSamples = std::max(maxSamples, textureCaps.getMaxSamples());
+
+        if (gl::GetInternalFormatInfo(*internalFormat).compressed)
+        {
+            caps->compressedTextureFormats.push_back(*internalFormat);
+        }
+    }
+
+    D3D_FEATURE_LEVEL featureLevel = device->GetFeatureLevel();
+
+    // GL core feature limits
+    caps->maxElementIndex = static_cast<GLint64>(std::numeric_limits<unsigned int>::max());
+    caps->max3DTextureSize = GetMaximum3DTextureSize(featureLevel);
+    caps->max2DTextureSize = GetMaximum2DTextureSize(featureLevel);
+    caps->maxCubeMapTextureSize = GetMaximumCubeMapTextureSize(featureLevel);
+    caps->maxArrayTextureLayers = GetMaximum2DTextureArraySize(featureLevel);
+
+    // Unimplemented, set to minimum required
+    caps->maxLODBias = 2.0f;
+
+    // No specific limits on render target size, maximum 2D texture size is equivalent
+    caps->maxRenderbufferSize = caps->max2DTextureSize;
+
+    // Maximum draw buffers and color attachments are the same, max color attachments could eventually be
+    // increased to 16
+    caps->maxDrawBuffers = GetMaximumSimultaneousRenderTargets(featureLevel);
+    caps->maxColorAttachments = GetMaximumSimultaneousRenderTargets(featureLevel);
+
+    // D3D11 has the same limit for viewport width and height
+    caps->maxViewportWidth = GetMaximumViewportSize(featureLevel);
+    caps->maxViewportHeight = caps->maxViewportWidth;
+
+    // Choose a reasonable maximum, enforced in the shader.
+    caps->minAliasedPointSize = 1.0f;
+    caps->maxAliasedPointSize = 1024.0f;
+
+    // Wide lines not supported
+    caps->minAliasedLineWidth = 1.0f;
+    caps->maxAliasedLineWidth = 1.0f;
+
+    // Primitive count limits
+    caps->maxElementsIndices = GetMaximumDrawIndexedIndexCount(featureLevel);
+    caps->maxElementsVertices = GetMaximumDrawVertexCount(featureLevel);
+
+    // Program and shader binary formats (no supported shader binary formats)
+    caps->programBinaryFormats.push_back(GL_PROGRAM_BINARY_ANGLE);
+
+    // We do not wait for server fence objects internally, so report a max timeout of zero.
+    caps->maxServerWaitTimeout = 0;
+
+    // Vertex shader limits
+    caps->maxVertexAttributes = GetMaximumVertexInputSlots(featureLevel);
+    caps->maxVertexUniformComponents = GetMaximumVertexUniformVectors(featureLevel) * 4;
+    caps->maxVertexUniformVectors = GetMaximumVertexUniformVectors(featureLevel);
+    caps->maxVertexUniformBlocks = GetMaximumVertexUniformBlocks(featureLevel);
+    caps->maxVertexOutputComponents = GetMaximumVertexOutputVectors(featureLevel) * 4;
+    caps->maxVertexTextureImageUnits = GetMaximumVertexTextureUnits(featureLevel);
+
+    // Fragment shader limits
+    caps->maxFragmentUniformComponents = GetMaximumPixelUniformVectors(featureLevel) * 4;
+    caps->maxFragmentUniformVectors = GetMaximumPixelUniformVectors(featureLevel);
+    caps->maxFragmentUniformBlocks = GetMaximumPixelUniformBlocks(featureLevel);
+    caps->maxFragmentInputComponents = GetMaximumPixelInputVectors(featureLevel) * 4;
+    caps->maxTextureImageUnits = GetMaximumPixelTextureUnits(featureLevel);
+    caps->minProgramTexelOffset = GetMinimumTexelOffset(featureLevel);
+    caps->maxProgramTexelOffset = GetMaximumTexelOffset(featureLevel);
+
+    // Aggregate shader limits
+    caps->maxUniformBufferBindings = caps->maxVertexUniformBlocks + caps->maxFragmentUniformBlocks;
+    caps->maxUniformBlockSize = GetMaximumConstantBufferSize(featureLevel);
+
+    // Setting a large alignment forces uniform buffers to bind with zero offset
+    caps->uniformBufferOffsetAlignment = static_cast<GLuint>(std::numeric_limits<GLint>::max());
+
+    caps->maxCombinedUniformBlocks = caps->maxVertexUniformBlocks + caps->maxFragmentUniformBlocks;
+    caps->maxCombinedVertexUniformComponents = (static_cast<GLint64>(caps->maxVertexUniformBlocks) * static_cast<GLint64>(caps->maxUniformBlockSize / 4)) +
+                                               static_cast<GLint64>(caps->maxVertexUniformComponents);
+    caps->maxCombinedFragmentUniformComponents = (static_cast<GLint64>(caps->maxFragmentUniformBlocks) * static_cast<GLint64>(caps->maxUniformBlockSize / 4)) +
+                                                 static_cast<GLint64>(caps->maxFragmentUniformComponents);
+    caps->maxVaryingComponents = GetMaximumVertexOutputVectors(featureLevel) * 4;
+    caps->maxVaryingVectors = GetMaximumVertexOutputVectors(featureLevel);
+    caps->maxCombinedTextureImageUnits = caps->maxVertexTextureImageUnits + caps->maxTextureImageUnits;
+
+    // Transform feedback limits
+    caps->maxTransformFeedbackInterleavedComponents = GetMaximumStreamOutputInterleavedComponenets(featureLevel);
+    caps->maxTransformFeedbackSeparateAttributes = GetMaximumStreamOutputBuffers(featureLevel);
+    caps->maxTransformFeedbackSeparateComponents = GetMaximumStreamOutputSeparateCompeonents(featureLevel);
+
+    // GL extension support
+    extensions->setTextureExtensionSupport(*textureCapsMap);
+    extensions->elementIndexUint = true;
+    extensions->packedDepthStencil = true;
+    extensions->getProgramBinary = true;
+    extensions->rgb8rgba8 = true;
+    extensions->readFormatBGRA = true;
+    extensions->pixelBufferObject = true;
+    extensions->mapBuffer = true;
+    extensions->mapBufferRange = true;
+    extensions->textureNPOT = GetNPOTTextureSupport(featureLevel);
+    extensions->drawBuffers = GetMaximumSimultaneousRenderTargets(featureLevel) > 1;
+    extensions->textureStorage = true;
+    extensions->textureFilterAnisotropic = true;
+    extensions->maxTextureAnisotropy = GetMaximumAnisotropy(featureLevel);
+    extensions->occlusionQueryBoolean = GetOcclusionQuerySupport(featureLevel);
+    extensions->fence = GetEventQuerySupport(featureLevel);
+    extensions->timerQuery = false; // Unimplemented
+    extensions->robustness = true;
+    extensions->blendMinMax = true;
+    extensions->framebufferBlit = true;
+    extensions->framebufferMultisample = true;
+    extensions->maxSamples = maxSamples;
+    extensions->instancedArrays = GetInstancingSupport(featureLevel);
+    extensions->packReverseRowOrder = true;
+    extensions->standardDerivatives = GetDerivativeInstructionSupport(featureLevel);
+    extensions->shaderTextureLOD = true;
+    extensions->fragDepth = true;
+    extensions->textureUsage = true; // This could be false since it has no effect in D3D11
+    extensions->translatedShaderSource = true;
+}
+
+}
+
+namespace d3d11
+{
+
+void MakeValidSize(bool isImage, DXGI_FORMAT format, GLsizei *requestWidth, GLsizei *requestHeight, int *levelOffset)
+{
+    const DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(format);
+
+    int upsampleCount = 0;
+    // Don't expand the size of full textures that are at least (blockWidth x blockHeight) already.
+    if (isImage || *requestWidth  < static_cast<GLsizei>(dxgiFormatInfo.blockWidth) ||
+                   *requestHeight < static_cast<GLsizei>(dxgiFormatInfo.blockHeight))
+    {
+        while (*requestWidth % dxgiFormatInfo.blockWidth != 0 || *requestHeight % dxgiFormatInfo.blockHeight != 0)
+        {
+            *requestWidth <<= 1;
+            *requestHeight <<= 1;
+            upsampleCount++;
+        }
+    }
+    *levelOffset = upsampleCount;
+}
+
+void GenerateInitialTextureData(GLint internalFormat, GLuint width, GLuint height, GLuint depth,
+                                GLuint mipLevels, std::vector<D3D11_SUBRESOURCE_DATA> *outSubresourceData,
+                                std::vector< std::vector<BYTE> > *outData)
+{
+    const d3d11::TextureFormat &d3dFormatInfo = d3d11::GetTextureFormatInfo(internalFormat);
+    ASSERT(d3dFormatInfo.dataInitializerFunction != NULL);
+
+    const d3d11::DXGIFormat &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(d3dFormatInfo.texFormat);
+
+    outSubresourceData->resize(mipLevels);
+    outData->resize(mipLevels);
+
+    for (unsigned int i = 0; i < mipLevels; i++)
+    {
+        unsigned int mipWidth = std::max(width >> i, 1U);
+        unsigned int mipHeight = std::max(height >> i, 1U);
+        unsigned int mipDepth = std::max(depth >> i, 1U);
+
+        unsigned int rowWidth = dxgiFormatInfo.pixelBytes * mipWidth;
+        unsigned int imageSize = rowWidth * height;
+
+        outData->at(i).resize(rowWidth * mipHeight * mipDepth);
+        d3dFormatInfo.dataInitializerFunction(mipWidth, mipHeight, mipDepth, outData->at(i).data(), rowWidth, imageSize);
+
+        outSubresourceData->at(i).pSysMem = outData->at(i).data();
+        outSubresourceData->at(i).SysMemPitch = rowWidth;
+        outSubresourceData->at(i).SysMemSlicePitch = imageSize;
+    }
+}
+
+void SetPositionTexCoordVertex(PositionTexCoordVertex* vertex, float x, float y, float u, float v)
+{
+    vertex->x = x;
+    vertex->y = y;
+    vertex->u = u;
+    vertex->v = v;
+}
+
+void SetPositionLayerTexCoord3DVertex(PositionLayerTexCoord3DVertex* vertex, float x, float y,
+                                      unsigned int layer, float u, float v, float s)
+{
+    vertex->x = x;
+    vertex->y = y;
+    vertex->l = layer;
+    vertex->u = u;
+    vertex->v = v;
+    vertex->s = s;
+}
+
+HRESULT SetDebugName(ID3D11DeviceChild *resource, const char *name)
+{
+#if !defined(__MINGW32__) && defined(_DEBUG)
+    return resource->SetPrivateData(WKPDID_D3DDebugObjectName, strlen(name), name);
+#else
+    return S_OK;
+#endif
+}
+
+RenderTarget11 *GetAttachmentRenderTarget(gl::FramebufferAttachment *attachment)
+{
+    RenderTarget *renderTarget = rx::GetAttachmentRenderTarget(attachment);
+    return RenderTarget11::makeRenderTarget11(renderTarget);
+}
+
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.h
new file mode 100644
index 0000000000..4c05eb9256
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.h
@@ -0,0 +1,185 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// renderer11_utils.h: Conversion functions and other utility routines
+// specific to the D3D11 renderer.
+
+#ifndef LIBGLESV2_RENDERER_RENDERER11_UTILS_H
+#define LIBGLESV2_RENDERER_RENDERER11_UTILS_H
+
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/Caps.h"
+
+#include <vector>
+
+namespace gl
+{
+class FramebufferAttachment;
+}
+
+namespace rx
+{
+class RenderTarget11;
+
+namespace gl_d3d11
+{
+
+D3D11_BLEND ConvertBlendFunc(GLenum glBlend, bool isAlpha);
+D3D11_BLEND_OP ConvertBlendOp(GLenum glBlendOp);
+UINT8 ConvertColorMask(bool maskRed, bool maskGreen, bool maskBlue, bool maskAlpha);
+
+D3D11_CULL_MODE ConvertCullMode(bool cullEnabled, GLenum cullMode);
+
+D3D11_COMPARISON_FUNC ConvertComparison(GLenum comparison);
+D3D11_DEPTH_WRITE_MASK ConvertDepthMask(bool depthWriteEnabled);
+UINT8 ConvertStencilMask(GLuint stencilmask);
+D3D11_STENCIL_OP ConvertStencilOp(GLenum stencilOp);
+
+D3D11_FILTER ConvertFilter(GLenum minFilter, GLenum magFilter, float maxAnisotropy, GLenum comparisonMode);
+D3D11_TEXTURE_ADDRESS_MODE ConvertTextureWrap(GLenum wrap);
+
+D3D11_QUERY ConvertQueryType(GLenum queryType);
+
+}
+
+namespace d3d11_gl
+{
+
+void GenerateCaps(ID3D11Device *device, gl::Caps *caps, gl::TextureCapsMap *textureCapsMap, gl::Extensions *extensions);
+
+}
+
+namespace d3d11
+{
+
+void MakeValidSize(bool isImage, DXGI_FORMAT format, GLsizei *requestWidth, GLsizei *requestHeight, int *levelOffset);
+
+void GenerateInitialTextureData(GLint internalFormat, GLuint width, GLuint height, GLuint depth,
+                                GLuint mipLevels, std::vector<D3D11_SUBRESOURCE_DATA> *outSubresourceData,
+                                std::vector< std::vector<BYTE> > *outData);
+
+struct PositionTexCoordVertex
+{
+    float x, y;
+    float u, v;
+};
+void SetPositionTexCoordVertex(PositionTexCoordVertex* vertex, float x, float y, float u, float v);
+
+struct PositionLayerTexCoord3DVertex
+{
+    float x, y;
+    unsigned int l;
+    float u, v, s;
+};
+void SetPositionLayerTexCoord3DVertex(PositionLayerTexCoord3DVertex* vertex, float x, float y,
+                                      unsigned int layer, float u, float v, float s);
+
+template <typename T>
+struct PositionDepthColorVertex
+{
+    float x, y, z;
+    T r, g, b, a;
+};
+
+template <typename T>
+void SetPositionDepthColorVertex(PositionDepthColorVertex<T>* vertex, float x, float y, float z,
+                                 const gl::Color<T> &color)
+{
+    vertex->x = x;
+    vertex->y = y;
+    vertex->z = z;
+    vertex->r = color.red;
+    vertex->g = color.green;
+    vertex->b = color.blue;
+    vertex->a = color.alpha;
+}
+
+HRESULT SetDebugName(ID3D11DeviceChild *resource, const char *name);
+
+template <typename outType>
+outType* DynamicCastComObject(IUnknown* object)
+{
+    outType *outObject = NULL;
+    HRESULT result = object->QueryInterface(__uuidof(outType), reinterpret_cast<void**>(&outObject));
+    if (SUCCEEDED(result))
+    {
+        return outObject;
+    }
+    else
+    {
+        SafeRelease(outObject);
+        return NULL;
+    }
+}
+
+inline bool isDeviceLostError(HRESULT errorCode)
+{
+    switch (errorCode)
+    {
+      case DXGI_ERROR_DEVICE_HUNG:
+      case DXGI_ERROR_DEVICE_REMOVED:
+      case DXGI_ERROR_DEVICE_RESET:
+      case DXGI_ERROR_DRIVER_INTERNAL_ERROR:
+      case DXGI_ERROR_NOT_CURRENTLY_AVAILABLE:
+        return true;
+      default:
+        return false;
+    }
+}
+
+template <unsigned int N>
+inline ID3D11VertexShader *CompileVS(ID3D11Device *device, const BYTE (&byteCode)[N], const char *name)
+{
+    ID3D11VertexShader *vs = NULL;
+    HRESULT result = device->CreateVertexShader(byteCode, N, NULL, &vs);
+    UNUSED_ASSERTION_VARIABLE(result);
+    ASSERT(SUCCEEDED(result));
+    SetDebugName(vs, name);
+    return vs;
+}
+
+template <unsigned int N>
+inline ID3D11GeometryShader *CompileGS(ID3D11Device *device, const BYTE (&byteCode)[N], const char *name)
+{
+    ID3D11GeometryShader *gs = NULL;
+    HRESULT result = device->CreateGeometryShader(byteCode, N, NULL, &gs);
+    UNUSED_ASSERTION_VARIABLE(result);
+    ASSERT(SUCCEEDED(result));
+    SetDebugName(gs, name);
+    return gs;
+}
+
+template <unsigned int N>
+inline ID3D11PixelShader *CompilePS(ID3D11Device *device, const BYTE (&byteCode)[N], const char *name)
+{
+    ID3D11PixelShader *ps = NULL;
+    HRESULT result = device->CreatePixelShader(byteCode, N, NULL, &ps);
+    UNUSED_ASSERTION_VARIABLE(result);
+    ASSERT(SUCCEEDED(result));
+    SetDebugName(ps, name);
+    return ps;
+}
+
+// Copy data to small D3D11 buffers, such as for small constant buffers, which use one struct to
+// represent an entire buffer.
+template <class T>
+inline void SetBufferData(ID3D11DeviceContext *context, ID3D11Buffer *constantBuffer, const T &value)
+{
+    D3D11_MAPPED_SUBRESOURCE mappedResource;
+    context->Map(constantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
+
+    memcpy(mappedResource.pData, &value, sizeof(T));
+
+    context->Unmap(constantBuffer, 0);
+}
+
+RenderTarget11 *GetAttachmentRenderTarget(gl::FramebufferAttachment *attachment);
+
+}
+
+}
+
+#endif // LIBGLESV2_RENDERER_RENDERER11_UTILS_H
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/BufferToTexture11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/BufferToTexture11.hlsl
new file mode 100644
index 0000000000..20e6623a30
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/BufferToTexture11.hlsl
@@ -0,0 +1,76 @@
+Buffer<float4>    Buffer4F  : register(t0);
+Buffer<int4>      Buffer4I  : register(t0);
+Buffer<uint4>     Buffer4UI : register(t0);
+
+struct VS_OUTPUT
+{
+    float4 position : SV_Position;
+    uint index      : TEXCOORD0;
+    uint slice      : LAYER;
+};
+
+struct GS_OUTPUT
+{
+    float4 position : SV_Position;
+    uint index      : TEXCOORD0;
+    uint slice      : SV_RenderTargetArrayIndex;
+};
+
+cbuffer BufferCopyParams : register(b0)
+{
+    uint FirstPixelOffset;
+    uint PixelsPerRow;
+    uint RowStride;
+    uint RowsPerSlice;
+    float2 PositionOffset;
+    float2 PositionScale;
+    int2 TexLocationOffset;
+    int2 TexLocationScale;
+}
+
+void ComputePositionAndIndex(uint vertexID, out VS_OUTPUT outVertex)
+{
+    uint PixelsPerSlice = PixelsPerRow * RowsPerSlice;
+    uint SliceStride    = RowStride * RowsPerSlice;
+
+    uint slice          = vertexID / PixelsPerSlice;
+    uint sliceOffset    = slice * PixelsPerSlice;
+    uint row            = (vertexID - sliceOffset) / PixelsPerRow;
+    uint col            = vertexID - sliceOffset - (row * PixelsPerRow);
+
+    float2 coords       = float2(float(col), float(row));
+
+    outVertex.position  = float4(PositionOffset + PositionScale * coords, 0.0f, 1.0f);
+    outVertex.index     = FirstPixelOffset + slice * SliceStride + row * RowStride + col;
+    outVertex.slice     = slice;
+}
+
+void VS_BufferToTexture(in uint vertexID : SV_VertexID, out VS_OUTPUT outVertex)
+{
+    ComputePositionAndIndex(vertexID, outVertex);
+}
+
+[maxvertexcount(1)]
+void GS_BufferToTexture(point VS_OUTPUT inVertex[1], inout PointStream<GS_OUTPUT> outStream)
+{
+    GS_OUTPUT outVertex;
+    outVertex.position  = inVertex[0].position;
+    outVertex.index     = inVertex[0].index;
+    outVertex.slice     = inVertex[0].slice;
+    outStream.Append(outVertex);
+}
+
+float4 PS_BufferToTexture_4F(in float4 inPosition : SV_Position, in uint inIndex : TEXCOORD0) : SV_Target
+{
+    return Buffer4F.Load(inIndex);
+}
+
+int4 PS_BufferToTexture_4I(in float4 inPosition : SV_Position, in uint inIndex : TEXCOORD0) : SV_Target
+{
+    return Buffer4I.Load(inIndex);
+}
+
+uint4 PS_BufferToTexture_4UI(in float4 inPosition : SV_Position, in uint inIndex : TEXCOORD0) : SV_Target
+{
+    return Buffer4UI.Load(inIndex);
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl
new file mode 100644
index 0000000000..b4cf38076e
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl
@@ -0,0 +1,106 @@
+// Assume we are in SM4+, which has 8 color outputs
+
+void VS_ClearFloat( in float3  inPosition :    POSITION,  in float4  inColor : COLOR,
+                   out float4 outPosition : SV_POSITION, out float4 outColor : COLOR)
+{
+    outPosition = float4(inPosition, 1.0f);
+    outColor = inColor;
+}
+
+struct PS_OutputFloat
+{
+    float4 color0 : SV_TARGET0;
+    float4 color1 : SV_TARGET1;
+    float4 color2 : SV_TARGET2;
+    float4 color3 : SV_TARGET3;
+#if SM4
+    float4 color4 : SV_TARGET4;
+    float4 color5 : SV_TARGET5;
+    float4 color6 : SV_TARGET6;
+    float4 color7 : SV_TARGET7;
+#endif
+};
+
+PS_OutputFloat PS_ClearFloat(in float4 inPosition : SV_POSITION, in float4 inColor : COLOR)
+{
+    PS_OutputFloat outColor;
+    outColor.color0 = inColor;
+    outColor.color1 = inColor;
+    outColor.color2 = inColor;
+    outColor.color3 = inColor;
+#if SM4
+    outColor.color4 = inColor;
+    outColor.color5 = inColor;
+    outColor.color6 = inColor;
+    outColor.color7 = inColor;
+#endif
+    return outColor;
+}
+
+
+void VS_ClearUint( in float3  inPosition :    POSITION,   in uint4  inColor : COLOR,
+                   out float4 outPosition : SV_POSITION, out uint4 outColor : COLOR)
+{
+    outPosition = float4(inPosition, 1.0f);
+    outColor = inColor;
+}
+
+struct PS_OutputUint
+{
+    uint4 color0 : SV_TARGET0;
+    uint4 color1 : SV_TARGET1;
+    uint4 color2 : SV_TARGET2;
+    uint4 color3 : SV_TARGET3;
+    uint4 color4 : SV_TARGET4;
+    uint4 color5 : SV_TARGET5;
+    uint4 color6 : SV_TARGET6;
+    uint4 color7 : SV_TARGET7;
+};
+
+PS_OutputUint PS_ClearUint(in float4 inPosition : SV_POSITION, in uint4 inColor : COLOR)
+{
+    PS_OutputUint outColor;
+    outColor.color0 = inColor;
+    outColor.color1 = inColor;
+    outColor.color2 = inColor;
+    outColor.color3 = inColor;
+    outColor.color4 = inColor;
+    outColor.color5 = inColor;
+    outColor.color6 = inColor;
+    outColor.color7 = inColor;
+    return outColor;
+}
+
+
+void VS_ClearSint( in float3  inPosition :    POSITION,   in int4  inColor : COLOR,
+                   out float4 outPosition : SV_POSITION, out int4 outColor : COLOR)
+{
+    outPosition = float4(inPosition, 1.0f);
+    outColor = inColor;
+}
+
+struct PS_OutputSint
+{
+    int4 color0 : SV_TARGET0;
+    int4 color1 : SV_TARGET1;
+    int4 color2 : SV_TARGET2;
+    int4 color3 : SV_TARGET3;
+    int4 color4 : SV_TARGET4;
+    int4 color5 : SV_TARGET5;
+    int4 color6 : SV_TARGET6;
+    int4 color7 : SV_TARGET7;
+};
+
+PS_OutputSint PS_ClearSint(in float4 inPosition : SV_POSITION, in int4 inColor : COLOR)
+{
+    PS_OutputSint outColor;
+    outColor.color0 = inColor;
+    outColor.color1 = inColor;
+    outColor.color2 = inColor;
+    outColor.color3 = inColor;
+    outColor.color4 = inColor;
+    outColor.color5 = inColor;
+    outColor.color6 = inColor;
+    outColor.color7 = inColor;
+    return outColor;
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Passthrough2D11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Passthrough2D11.hlsl
new file mode 100644
index 0000000000..8671c39fb7
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Passthrough2D11.hlsl
@@ -0,0 +1,111 @@
+Texture2D<float4> TextureF  : register(t0);
+Texture2D<uint4>  TextureUI : register(t0);
+Texture2D<int4>   TextureI  : register(t0);
+
+SamplerState Sampler        : register(s0);
+
+void VS_Passthrough2D( in float2  inPosition :    POSITION,  in float2  inTexCoord : TEXCOORD0,
+                    out float4 outPosition : SV_POSITION, out float2 outTexCoord : TEXCOORD0)
+{
+    outPosition = float4(inPosition, 0.0f, 1.0f);
+    outTexCoord = inTexCoord;
+}
+
+float PS_PassthroughDepth2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_DEPTH
+{
+    return TextureF.Sample(Sampler, inTexCoord).r;
+}
+
+float4 PS_PassthroughRGBA2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return TextureF.Sample(Sampler, inTexCoord).rgba;
+}
+
+uint4 PS_PassthroughRGBA2DUI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureUI.GetDimensions(size.x, size.y);
+
+    return TextureUI.Load(int3(size * inTexCoord, 0)).rgba;
+}
+
+int4 PS_PassthroughRGBA2DI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureI.GetDimensions(size.x, size.y);
+
+    return TextureI.Load(int3(size * inTexCoord, 0)).rgba;
+}
+
+float4 PS_PassthroughRGB2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, inTexCoord).rgb, 1.0f);
+}
+
+uint4 PS_PassthroughRGB2DUI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureUI.GetDimensions(size.x, size.y);
+
+    return uint4(TextureUI.Load(int3(size * inTexCoord, 0)).rgb, 0);
+}
+
+int4 PS_PassthroughRGB2DI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureI.GetDimensions(size.x, size.y);
+
+    return int4(TextureI.Load(int3(size * inTexCoord, 0)).rgb, 0);
+}
+
+float4 PS_PassthroughRG2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, inTexCoord).rg, 0.0f, 1.0f);
+}
+
+uint4 PS_PassthroughRG2DUI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureUI.GetDimensions(size.x, size.y);
+
+    return uint4(TextureUI.Load(int3(size * inTexCoord, 0)).rg, 0, 0);
+}
+
+int4 PS_PassthroughRG2DI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureI.GetDimensions(size.x, size.y);
+
+    return int4(TextureI.Load(int3(size * inTexCoord, 0)).rg, 0, 0);
+}
+
+float4 PS_PassthroughR2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, inTexCoord).r, 0.0f, 0.0f, 1.0f);
+}
+
+uint4 PS_PassthroughR2DUI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureUI.GetDimensions(size.x, size.y);
+
+    return uint4(TextureUI.Load(int3(size * inTexCoord, 0)).r, 0, 0, 0);
+}
+
+int4 PS_PassthroughR2DI(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureI.GetDimensions(size.x, size.y);
+
+    return int4(TextureI.Load(int3(size * inTexCoord, 0)).r, 0, 0, 0);
+}
+
+float4 PS_PassthroughLum2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, inTexCoord).rrr, 1.0f);
+}
+
+float4 PS_PassthroughLumAlpha2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return TextureF.Sample(Sampler, inTexCoord).rrra;
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Passthrough3D11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Passthrough3D11.hlsl
new file mode 100644
index 0000000000..c23c9032ec
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Passthrough3D11.hlsl
@@ -0,0 +1,146 @@
+Texture3D<float4> TextureF  : register(t0);
+Texture3D<uint4>  TextureUI : register(t0);
+Texture3D<int4>   TextureI  : register(t0);
+
+SamplerState      Sampler   : register(s0);
+
+struct VS_INPUT
+{
+    float2 Position : POSITION;
+    uint   Layer    : LAYER;
+    float3 TexCoord : TEXCOORD;
+};
+
+struct VS_OUTPUT
+{
+    float4 Position : SV_POSITION;
+    uint   Layer    : LAYER;
+    float3 TexCoord : TEXCOORD;
+};
+
+struct GS_OUTPUT
+{
+    float4 Position : SV_POSITION;
+    uint   Layer    : SV_RENDERTARGETARRAYINDEX;
+    float3 TexCoord : TEXCOORD;
+};
+
+VS_OUTPUT VS_Passthrough3D(VS_INPUT input)
+{
+    VS_OUTPUT output;
+
+    output.Position = float4(input.Position, 0.0f, 1.0f);
+    output.Layer = input.Layer;
+    output.TexCoord = input.TexCoord;
+
+    return output;
+}
+
+[maxvertexcount(3)]
+void GS_Passthrough3D(triangle VS_OUTPUT input[3], inout TriangleStream<GS_OUTPUT> outputStream)
+{
+    GS_OUTPUT output;
+
+    for (int i = 0; i < 3; i++)
+    {
+        output.Position = input[i].Position;
+        output.Layer = input[i].Layer;
+        output.TexCoord = input[i].TexCoord;
+
+        outputStream.Append(output);
+    }
+}
+
+float4 PS_PassthroughRGBA3D(GS_OUTPUT input) : SV_TARGET0
+{
+    return TextureF.Sample(Sampler, input.TexCoord).rgba;
+}
+
+uint4 PS_PassthroughRGBA3DUI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureUI.GetDimensions(size.x, size.y, size.z);
+
+    return TextureUI.Load(int4(size * input.TexCoord, 0)).rgba;
+}
+
+int4 PS_PassthroughRGBA3DI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureI.GetDimensions(size.x, size.y, size.z);
+
+    return TextureI.Load(int4(size * input.TexCoord, 0)).rgba;
+}
+
+float4 PS_PassthroughRGB3D(GS_OUTPUT input) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, input.TexCoord).rgb, 1.0f);
+}
+
+uint4 PS_PassthroughRGB3DUI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureUI.GetDimensions(size.x, size.y, size.z);
+
+    return uint4(TextureUI.Load(int4(size * input.TexCoord, 0)).rgb, 0);
+}
+
+int4 PS_PassthroughRGB3DI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureI.GetDimensions(size.x, size.y, size.z);
+
+    return int4(TextureI.Load(int4(size * input.TexCoord, 0)).rgb, 0);
+}
+
+float4 PS_PassthroughRG3D(GS_OUTPUT input) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, input.TexCoord).rg, 0.0f, 1.0f);
+}
+
+uint4 PS_PassthroughRG3DUI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureUI.GetDimensions(size.x, size.y, size.z);
+
+    return uint4(TextureUI.Load(int4(size * input.TexCoord, 0)).rg, 0, 0);
+}
+
+int4 PS_PassthroughRG3DI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureI.GetDimensions(size.x, size.y, size.z);
+
+    return int4(TextureI.Load(int4(size * input.TexCoord, 0)).rg, 0, 0);
+}
+
+float4 PS_PassthroughR3D(GS_OUTPUT input) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, input.TexCoord).r, 0.0f, 0.0f, 1.0f);
+}
+
+uint4 PS_PassthroughR3DUI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureUI.GetDimensions(size.x, size.y, size.z);
+
+    return uint4(TextureUI.Load(int4(size * input.TexCoord, 0)).r, 0, 0, 0);
+}
+
+int4 PS_PassthroughR3DI(GS_OUTPUT input) : SV_TARGET0
+{
+    uint3 size;
+    TextureI.GetDimensions(size.x, size.y, size.z);
+
+    return int4(TextureI.Load(int4(size * input.TexCoord, 0)).r, 0, 0, 0);
+}
+
+float4 PS_PassthroughLum3D(GS_OUTPUT input) : SV_TARGET0
+{
+    return float4(TextureF.Sample(Sampler, input.TexCoord).rrr, 1.0f);
+}
+
+float4 PS_PassthroughLumAlpha3D(GS_OUTPUT input) : SV_TARGET0
+{
+    return TextureF.Sample(Sampler, input.TexCoord).rrra;
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Swizzle11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Swizzle11.hlsl
new file mode 100644
index 0000000000..505e222137
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Swizzle11.hlsl
@@ -0,0 +1,99 @@
+Texture2D<float4> TextureF2D  : register(t0);
+Texture2D<uint4>  TextureUI2D : register(t0);
+Texture2D<int4>   TextureI2D  : register(t0);
+
+Texture3D<float4> TextureF3D  : register(t0);
+Texture3D<uint4>  TextureUI3D : register(t0);
+Texture3D<int4>   TextureI3D  : register(t0);
+
+Texture2DArray<float4> TextureF2DArray  : register(t0);
+Texture2DArray<uint4>  TextureUI2DArray : register(t0);
+Texture2DArray<int4>   TextureI2DArray  : register(t0);
+
+SamplerState Sampler          : register(s0);
+
+cbuffer SwizzleProperties     : register(b0)
+{
+    uint4 SwizzleIndices      : packoffset(c0);
+}
+
+float4 SwizzleLookup(in float4 sample)
+{
+    float lookup[6] = { sample[0], sample[1], sample[2], sample[3], 0.0f, 1.0f };
+    return float4(lookup[SwizzleIndices[0]], lookup[SwizzleIndices[1]], lookup[SwizzleIndices[2]], lookup[SwizzleIndices[3]]);
+}
+
+int4 SwizzleLookup(in int4 sample)
+{
+    int lookup[6] = { sample[0], sample[1], sample[2], sample[3], 0.0f, 1.0f };
+    return int4(lookup[SwizzleIndices[0]], lookup[SwizzleIndices[1]], lookup[SwizzleIndices[2]], lookup[SwizzleIndices[3]]);
+}
+
+uint4 SwizzleLookup(in uint4 sample)
+{
+    uint lookup[6] = { sample[0], sample[1], sample[2], sample[3], 0.0f, 1.0f };
+    return uint4(lookup[SwizzleIndices[0]], lookup[SwizzleIndices[1]], lookup[SwizzleIndices[2]], lookup[SwizzleIndices[3]]);
+}
+
+float4 PS_SwizzleF2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return SwizzleLookup(TextureF2D.Sample(Sampler, inTexCoord));
+}
+
+int4 PS_SwizzleI2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureI2D.GetDimensions(size.x, size.y);
+
+    return SwizzleLookup(TextureI2D.Load(int3(size * inTexCoord, 0)));
+}
+
+uint4 PS_SwizzleUI2D(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint2 size;
+    TextureUI2D.GetDimensions(size.x, size.y);
+
+    return SwizzleLookup(TextureUI2D.Load(int3(size * inTexCoord, 0)));
+}
+
+float4 PS_SwizzleF3D(in float4 inPosition : SV_POSITION, in uint inLayer : SV_RENDERTARGETARRAYINDEX, in float3 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return SwizzleLookup(TextureF3D.Sample(Sampler, inTexCoord));
+}
+
+int4 PS_SwizzleI3D(in float4 inPosition : SV_POSITION, in uint inLayer : SV_RENDERTARGETARRAYINDEX, in float3 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint3 size;
+    TextureI3D.GetDimensions(size.x, size.y, size.z);
+
+    return SwizzleLookup(TextureI3D.Load(int4(size * inTexCoord, 0)));
+}
+
+uint4 PS_SwizzleUI3D(in float4 inPosition : SV_POSITION, in uint inLayer : SV_RENDERTARGETARRAYINDEX, in float3 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint3 size;
+    TextureUI3D.GetDimensions(size.x, size.y, size.z);
+
+    return SwizzleLookup(TextureUI3D.Load(int4(size * inTexCoord, 0)));
+}
+
+float4 PS_SwizzleF2DArray(in float4 inPosition : SV_POSITION, in uint inLayer : SV_RENDERTARGETARRAYINDEX, in float3 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    return SwizzleLookup(TextureF2DArray.Sample(Sampler, float3(inTexCoord.xy, inLayer)));
+}
+
+int4 PS_SwizzleI2DArray(in float4 inPosition : SV_POSITION, in uint inLayer : SV_RENDERTARGETARRAYINDEX, in float3 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint3 size;
+    TextureI2DArray.GetDimensions(size.x, size.y, size.z);
+
+    return SwizzleLookup(TextureI2DArray.Load(int4(size.xy * inTexCoord.xy, inLayer, 0)));
+}
+
+uint4 PS_SwizzleUI2DArray(in float4 inPosition : SV_POSITION, in uint inLayer : SV_RENDERTARGETARRAYINDEX, in float3 inTexCoord : TEXCOORD0) : SV_TARGET0
+{
+    uint3 size;
+    TextureUI2DArray.GetDimensions(size.x, size.y, size.z);
+
+    return SwizzleLookup(TextureUI2DArray.Load(int4(size.xy * inTexCoord.xy, inLayer, 0)));
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Blit.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp
index d73df6418d..f061a32c52 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Blit.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp
@@ -1,74 +1,71 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
-// Blit.cpp: Surface copy utility class.
+// Blit9.cpp: Surface copy utility class.
 
-#include "libGLESv2/renderer/d3d9/Blit.h"
-
-#include "libGLESv2/main.h"
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/renderer/d3d9/TextureStorage9.h"
-#include "libGLESv2/renderer/d3d9/RenderTarget9.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Blit9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/d3d/d3d9/TextureStorage9.h"
+#include "libGLESv2/renderer/d3d/d3d9/RenderTarget9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
 #include "libGLESv2/Framebuffer.h"
-#include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/main.h"
 
 namespace
 {
-#include "libGLESv2/renderer/d3d9/shaders/compiled/standardvs.h"
-#include "libGLESv2/renderer/d3d9/shaders/compiled/flipyvs.h"
-#include "libGLESv2/renderer/d3d9/shaders/compiled/passthroughps.h"
-#include "libGLESv2/renderer/d3d9/shaders/compiled/luminanceps.h"
-#include "libGLESv2/renderer/d3d9/shaders/compiled/componentmaskps.h"
+// Precompiled shaders
+#include "libGLESv2/renderer/d3d/d3d9/shaders/compiled/standardvs.h"
+#include "libGLESv2/renderer/d3d/d3d9/shaders/compiled/flipyvs.h"
+#include "libGLESv2/renderer/d3d/d3d9/shaders/compiled/passthroughps.h"
+#include "libGLESv2/renderer/d3d/d3d9/shaders/compiled/luminanceps.h"
+#include "libGLESv2/renderer/d3d/d3d9/shaders/compiled/componentmaskps.h"
 
 const BYTE* const g_shaderCode[] =
 {
-    g_vs20_standardvs,
-    g_vs20_flipyvs,
-    g_ps20_passthroughps,
-    g_ps20_luminanceps,
-    g_ps20_componentmaskps
+    g_vs20_VS_standard,
+    g_vs20_VS_flipy,
+    g_ps20_PS_passthrough,
+    g_ps20_PS_luminance,
+    g_ps20_PS_componentmask
 };
 
 const size_t g_shaderSize[] =
 {
-    sizeof(g_vs20_standardvs),
-    sizeof(g_vs20_flipyvs),
-    sizeof(g_ps20_passthroughps),
-    sizeof(g_ps20_luminanceps),
-    sizeof(g_ps20_componentmaskps)
+    sizeof(g_vs20_VS_standard),
+    sizeof(g_vs20_VS_flipy),
+    sizeof(g_ps20_PS_passthrough),
+    sizeof(g_ps20_PS_luminance),
+    sizeof(g_ps20_PS_componentmask)
 };
 }
 
 namespace rx
 {
-Blit::Blit(rx::Renderer9 *renderer)
+Blit9::Blit9(rx::Renderer9 *renderer)
   : mRenderer(renderer), mQuadVertexBuffer(NULL), mQuadVertexDeclaration(NULL), mSavedStateBlock(NULL), mSavedRenderTarget(NULL), mSavedDepthStencil(NULL)
 {
     initGeometry();
     memset(mCompiledShaders, 0, sizeof(mCompiledShaders));
 }
 
-Blit::~Blit()
+Blit9::~Blit9()
 {
-    if (mSavedStateBlock) mSavedStateBlock->Release();
-    if (mQuadVertexBuffer) mQuadVertexBuffer->Release();
-    if (mQuadVertexDeclaration) mQuadVertexDeclaration->Release();
+    SafeRelease(mSavedStateBlock);
+    SafeRelease(mQuadVertexBuffer);
+    SafeRelease(mQuadVertexDeclaration);
 
     for (int i = 0; i < SHADER_COUNT; i++)
     {
-        if (mCompiledShaders[i])
-        {
-            mCompiledShaders[i]->Release();
-        }
+        SafeRelease(mCompiledShaders[i]);
     }
 }
 
-void Blit::initGeometry()
+void Blit9::initGeometry()
 {
     static const float quad[] =
     {
@@ -116,7 +113,7 @@ void Blit::initGeometry()
 }
 
 template <class D3DShaderType>
-bool Blit::setShader(ShaderId source, const char *profile,
+bool Blit9::setShader(ShaderId source, const char *profile,
                      D3DShaderType *(rx::Renderer9::*createShader)(const DWORD *, size_t length),
                      HRESULT (WINAPI IDirect3DDevice9::*setShader)(D3DShaderType*))
 {
@@ -154,17 +151,17 @@ bool Blit::setShader(ShaderId source, const char *profile,
     return true;
 }
 
-bool Blit::setVertexShader(ShaderId shader)
+bool Blit9::setVertexShader(ShaderId shader)
 {
     return setShader<IDirect3DVertexShader9>(shader, "vs_2_0", &rx::Renderer9::createVertexShader, &IDirect3DDevice9::SetVertexShader);
 }
 
-bool Blit::setPixelShader(ShaderId shader)
+bool Blit9::setPixelShader(ShaderId shader)
 {
     return setShader<IDirect3DPixelShader9>(shader, "ps_2_0", &rx::Renderer9::createPixelShader, &IDirect3DDevice9::SetPixelShader);
 }
 
-RECT Blit::getSurfaceRect(IDirect3DSurface9 *surface) const
+RECT Blit9::getSurfaceRect(IDirect3DSurface9 *surface) const
 {
     D3DSURFACE_DESC desc;
     surface->GetDesc(&desc);
@@ -178,7 +175,7 @@ RECT Blit::getSurfaceRect(IDirect3DSurface9 *surface) const
     return rect;
 }
 
-bool Blit::boxFilter(IDirect3DSurface9 *source, IDirect3DSurface9 *dest)
+bool Blit9::boxFilter(IDirect3DSurface9 *source, IDirect3DSurface9 *dest)
 {
     IDirect3DTexture9 *texture = copySurfaceToTexture(source, getSurfaceRect(source));
     if (!texture)
@@ -204,24 +201,24 @@ bool Blit::boxFilter(IDirect3DSurface9 *source, IDirect3DSurface9 *dest)
 
     render();
 
-    texture->Release();
+    SafeRelease(texture);
 
     restoreState();
 
     return true;
 }
 
-bool Blit::copy(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level)
+bool Blit9::copy2D(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level)
 {
     RenderTarget9 *renderTarget = NULL;
     IDirect3DSurface9 *source = NULL;
-    gl::Renderbuffer *colorbuffer = framebuffer->getColorbuffer(0);
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getColorbuffer(0);
 
     if (colorbuffer)
     {
-        renderTarget = RenderTarget9::makeRenderTarget9(colorbuffer->getRenderTarget());
+        renderTarget = d3d9::GetAttachmentRenderTarget(colorbuffer);
     }
-    
+
     if (renderTarget)
     {
         source = renderTarget->getSurface();
@@ -233,31 +230,31 @@ bool Blit::copy(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum des
         return gl::error(GL_OUT_OF_MEMORY, false);
     }
 
-    TextureStorage9_2D *storage9 = TextureStorage9_2D::makeTextureStorage9_2D(storage->getStorageInstance());
+    TextureStorage9_2D *storage9 = TextureStorage9_2D::makeTextureStorage9_2D(storage);
     IDirect3DSurface9 *destSurface = storage9->getSurfaceLevel(level, true);
     bool result = false;
-        
+
     if (destSurface)
     {
         result = copy(source, sourceRect, destFormat, xoffset, yoffset, destSurface);
-        destSurface->Release();
+        SafeRelease(destSurface);
     }
 
-    source->Release();
+    SafeRelease(source);
     return result;
 }
 
-bool Blit::copy(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level)
+bool Blit9::copyCube(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level)
 {
     RenderTarget9 *renderTarget = NULL;
     IDirect3DSurface9 *source = NULL;
-    gl::Renderbuffer *colorbuffer = framebuffer->getColorbuffer(0);
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getColorbuffer(0);
 
     if (colorbuffer)
     {
-        renderTarget = RenderTarget9::makeRenderTarget9(colorbuffer->getRenderTarget());
+        renderTarget = d3d9::GetAttachmentRenderTarget(colorbuffer);
     }
-    
+
     if (renderTarget)
     {
         source = renderTarget->getSurface();
@@ -269,21 +266,21 @@ bool Blit::copy(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum des
         return gl::error(GL_OUT_OF_MEMORY, false);
     }
 
-    TextureStorage9_Cube *storage9 = TextureStorage9_Cube::makeTextureStorage9_Cube(storage->getStorageInstance());
+    TextureStorage9_Cube *storage9 = TextureStorage9_Cube::makeTextureStorage9_Cube(storage);
     IDirect3DSurface9 *destSurface = storage9->getCubeMapSurface(target, level, true);
     bool result = false;
 
     if (destSurface)
     {
         result = copy(source, sourceRect, destFormat, xoffset, yoffset, destSurface);
-        destSurface->Release();
+        SafeRelease(destSurface);
     }
 
-    source->Release();
+    SafeRelease(source);
     return result;
 }
 
-bool Blit::copy(IDirect3DSurface9 *source, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, IDirect3DSurface9 *dest)
+bool Blit9::copy(IDirect3DSurface9 *source, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, IDirect3DSurface9 *dest)
 {
     if (!dest)
     {
@@ -316,7 +313,7 @@ bool Blit::copy(IDirect3DSurface9 *source, const RECT &sourceRect, GLenum destFo
     return true;
 }
 
-bool Blit::formatConvert(IDirect3DSurface9 *source, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, IDirect3DSurface9 *dest)
+bool Blit9::formatConvert(IDirect3DSurface9 *source, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, IDirect3DSurface9 *dest)
 {
     IDirect3DTexture9 *texture = copySurfaceToTexture(source, sourceRect);
     if (!texture)
@@ -339,14 +336,14 @@ bool Blit::formatConvert(IDirect3DSurface9 *source, const RECT &sourceRect, GLen
         render();
     }
 
-    texture->Release();
+    SafeRelease(texture);
 
     restoreState();
 
     return true;
 }
 
-bool Blit::setFormatConvertShaders(GLenum destFormat)
+bool Blit9::setFormatConvertShaders(GLenum destFormat)
 {
     bool okay = setVertexShader(SHADER_VS_STANDARD);
 
@@ -356,6 +353,8 @@ bool Blit::setFormatConvertShaders(GLenum destFormat)
       case GL_RGBA:
       case GL_BGRA_EXT:
       case GL_RGB:
+      case GL_RG_EXT:
+      case GL_RED_EXT:
       case GL_ALPHA:
         okay = okay && setPixelShader(SHADER_PS_COMPONENTMASK);
         break;
@@ -375,41 +374,99 @@ bool Blit::setFormatConvertShaders(GLenum destFormat)
 
     // The meaning of this constant depends on the shader that was selected.
     // See the shader assembly code above for details.
-    float psConst0[4] = { 0, 0, 0, 0 };
+    // Allocate one array for both registers and split it into two float4's.
+    float psConst[8] = { 0 };
+    float *multConst = &psConst[0];
+    float *addConst = &psConst[4];
 
     switch (destFormat)
     {
       default: UNREACHABLE();
       case GL_RGBA:
       case GL_BGRA_EXT:
-        psConst0[X] = 1;
-        psConst0[Z] = 1;
+        multConst[X] = 1;
+        multConst[Y] = 1;
+        multConst[Z] = 1;
+        multConst[W] = 1;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 0;
         break;
 
       case GL_RGB:
-        psConst0[X] = 1;
-        psConst0[W] = 1;
+        multConst[X] = 1;
+        multConst[Y] = 1;
+        multConst[Z] = 1;
+        multConst[W] = 0;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 1;
+        break;
+
+      case GL_RG_EXT:
+        multConst[X] = 1;
+        multConst[Y] = 1;
+        multConst[Z] = 0;
+        multConst[W] = 0;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 1;
+        break;
+
+      case GL_RED_EXT:
+        multConst[X] = 1;
+        multConst[Y] = 0;
+        multConst[Z] = 0;
+        multConst[W] = 0;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 1;
         break;
 
       case GL_ALPHA:
-        psConst0[Z] = 1;
+        multConst[X] = 0;
+        multConst[Y] = 0;
+        multConst[Z] = 0;
+        multConst[W] = 1;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 0;
         break;
 
       case GL_LUMINANCE:
-        psConst0[Y] = 1;
+        multConst[X] = 1;
+        multConst[Y] = 0;
+        multConst[Z] = 0;
+        multConst[W] = 0;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 1;
         break;
 
       case GL_LUMINANCE_ALPHA:
-        psConst0[X] = 1;
+        multConst[X] = 1;
+        multConst[Y] = 0;
+        multConst[Z] = 0;
+        multConst[W] = 1;
+        addConst[X] = 0;
+        addConst[Y] = 0;
+        addConst[Z] = 0;
+        addConst[W] = 0;
         break;
     }
 
-    mRenderer->getDevice()->SetPixelShaderConstantF(0, psConst0, 1);
+    mRenderer->getDevice()->SetPixelShaderConstantF(0, psConst, 2);
 
     return true;
 }
 
-IDirect3DTexture9 *Blit::copySurfaceToTexture(IDirect3DSurface9 *surface, const RECT &sourceRect)
+IDirect3DTexture9 *Blit9::copySurfaceToTexture(IDirect3DSurface9 *surface, const RECT &sourceRect)
 {
     if (!surface)
     {
@@ -437,26 +494,26 @@ IDirect3DTexture9 *Blit::copySurfaceToTexture(IDirect3DSurface9 *surface, const
     if (FAILED(result))
     {
         ASSERT(result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY);
-        texture->Release();
+        SafeRelease(texture);
         return gl::error(GL_OUT_OF_MEMORY, (IDirect3DTexture9*)NULL);
     }
 
     mRenderer->endScene();
     result = device->StretchRect(surface, &sourceRect, textureSurface, NULL, D3DTEXF_NONE);
 
-    textureSurface->Release();
+    SafeRelease(textureSurface);
 
     if (FAILED(result))
     {
         ASSERT(result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY);
-        texture->Release();
+        SafeRelease(texture);
         return gl::error(GL_OUT_OF_MEMORY, (IDirect3DTexture9*)NULL);
     }
 
     return texture;
 }
 
-void Blit::setViewport(const RECT &sourceRect, GLint xoffset, GLint yoffset)
+void Blit9::setViewport(const RECT &sourceRect, GLint xoffset, GLint yoffset)
 {
     IDirect3DDevice9 *device = mRenderer->getDevice();
 
@@ -473,7 +530,7 @@ void Blit::setViewport(const RECT &sourceRect, GLint xoffset, GLint yoffset)
     device->SetVertexShaderConstantF(0, halfPixelAdjust, 1);
 }
 
-void Blit::setCommonBlitState()
+void Blit9::setCommonBlitState()
 {
     IDirect3DDevice9 *device = mRenderer->getDevice();
 
@@ -503,7 +560,7 @@ void Blit::setCommonBlitState()
     }
 }
 
-void Blit::render()
+void Blit9::render()
 {
     IDirect3DDevice9 *device = mRenderer->getDevice();
 
@@ -514,7 +571,7 @@ void Blit::render()
     hr = device->DrawPrimitive(D3DPT_TRIANGLESTRIP, 0, 2);
 }
 
-void Blit::saveState()
+void Blit9::saveState()
 {
     IDirect3DDevice9 *device = mRenderer->getDevice();
 
@@ -530,12 +587,12 @@ void Blit::saveState()
 
         setCommonBlitState();
 
-        static const float dummyConst[4] = { 0, 0, 0, 0 };
+        static const float dummyConst[8] = { 0 };
 
         device->SetVertexShader(NULL);
-        device->SetVertexShaderConstantF(0, dummyConst, 1);
+        device->SetVertexShaderConstantF(0, dummyConst, 2);
         device->SetPixelShader(NULL);
-        device->SetPixelShaderConstantF(0, dummyConst, 1);
+        device->SetPixelShaderConstantF(0, dummyConst, 2);
 
         D3DVIEWPORT9 dummyVp;
         dummyVp.X = 0;
@@ -566,23 +623,15 @@ void Blit::saveState()
     }
 }
 
-void Blit::restoreState()
+void Blit9::restoreState()
 {
     IDirect3DDevice9 *device = mRenderer->getDevice();
 
     device->SetDepthStencilSurface(mSavedDepthStencil);
-    if (mSavedDepthStencil != NULL)
-    {
-        mSavedDepthStencil->Release();
-        mSavedDepthStencil = NULL;
-    }
+    SafeRelease(mSavedDepthStencil);
 
     device->SetRenderTarget(0, mSavedRenderTarget);
-    if (mSavedRenderTarget != NULL)
-    {
-        mSavedRenderTarget->Release();
-        mSavedRenderTarget = NULL;
-    }
+    SafeRelease(mSavedRenderTarget);
 
     ASSERT(mSavedStateBlock != NULL);
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Blit.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.h
index 3718028e66..46a3ee1cf3 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Blit.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.h
@@ -4,13 +4,15 @@
 // found in the LICENSE file.
 //
 
-// Blit.cpp: Surface copy utility class.
+// Blit9.cpp: Surface copy utility class.
 
-#ifndef LIBGLESV2_BLIT_H_
-#define LIBGLESV2_BLIT_H_
+#ifndef LIBGLESV2_BLIT9_H_
+#define LIBGLESV2_BLIT9_H_
 
 #include "common/angleutils.h"
 
+#include <GLES2/gl2.h>
+
 namespace gl
 {
 class Framebuffer;
@@ -19,19 +21,18 @@ class Framebuffer;
 namespace rx
 {
 class Renderer9;
-class TextureStorageInterface2D;
-class TextureStorageInterfaceCube;
+class TextureStorage;
 
-class Blit
+class Blit9
 {
   public:
-    explicit Blit(Renderer9 *renderer);
-    ~Blit();
+    explicit Blit9(Renderer9 *renderer);
+    ~Blit9();
 
     // Copy from source surface to dest surface.
     // sourceRect, xoffset, yoffset are in D3D coordinates (0,0 in upper-left)
-    bool copy(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level);
-    bool copy(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level);
+    bool copy2D(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level);
+    bool copyCube(gl::Framebuffer *framebuffer, const RECT &sourceRect, GLenum destFormat, GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level);
 
     // Copy from source surface to dest surface.
     // sourceRect, xoffset, yoffset are in D3D coordinates (0,0 in upper-left)
@@ -87,8 +88,8 @@ class Blit
     IDirect3DSurface9 *mSavedRenderTarget;
     IDirect3DSurface9 *mSavedDepthStencil;
 
-    DISALLOW_COPY_AND_ASSIGN(Blit);
+    DISALLOW_COPY_AND_ASSIGN(Blit9);
 };
 }
 
-#endif   // LIBGLESV2_BLIT_H_
+#endif   // LIBGLESV2_BLIT9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Buffer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Buffer9.cpp
new file mode 100644
index 0000000000..c02db515a2
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Buffer9.cpp
@@ -0,0 +1,121 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Buffer9.cpp Defines the Buffer9 class.
+
+#include "libGLESv2/renderer/d3d/d3d9/Buffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+Buffer9::Buffer9(rx::Renderer9 *renderer)
+    : BufferD3D(),
+      mRenderer(renderer),
+      mSize(0)
+{}
+
+Buffer9::~Buffer9()
+{
+    mSize = 0;
+}
+
+Buffer9 *Buffer9::makeBuffer9(BufferImpl *buffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(Buffer9*, buffer));
+    return static_cast<Buffer9*>(buffer);
+}
+
+gl::Error Buffer9::setData(const void* data, size_t size, GLenum usage)
+{
+    if (size > mMemory.size())
+    {
+        if (!mMemory.resize(size))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to resize internal buffer.");
+        }
+    }
+
+    mSize = size;
+    if (data)
+    {
+        memcpy(mMemory.data(), data, size);
+    }
+
+    invalidateStaticData();
+
+    if (usage == GL_STATIC_DRAW)
+    {
+        initializeStaticData();
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+void *Buffer9::getData()
+{
+    return mMemory.data();
+}
+
+gl::Error Buffer9::setSubData(const void* data, size_t size, size_t offset)
+{
+    if (offset + size > mMemory.size())
+    {
+        if (!mMemory.resize(offset + size))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to resize internal buffer.");
+        }
+    }
+
+    mSize = std::max(mSize, offset + size);
+    if (data)
+    {
+        memcpy(mMemory.data() + offset, data, size);
+    }
+
+    invalidateStaticData();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Buffer9::copySubData(BufferImpl* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size)
+{
+    // Note: this method is currently unreachable
+    Buffer9* sourceBuffer = makeBuffer9(source);
+    ASSERT(sourceBuffer);
+
+    memcpy(mMemory.data() + destOffset, sourceBuffer->mMemory.data() + sourceOffset, size);
+
+    invalidateStaticData();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+// We do not support buffer mapping in D3D9
+gl::Error Buffer9::map(size_t offset, size_t length, GLbitfield access, GLvoid **mapPtr)
+{
+    UNREACHABLE();
+    return gl::Error(GL_INVALID_OPERATION);
+}
+
+gl::Error Buffer9::unmap()
+{
+    UNREACHABLE();
+    return gl::Error(GL_INVALID_OPERATION);
+}
+
+void Buffer9::markTransformFeedbackUsage()
+{
+    UNREACHABLE();
+}
+
+Renderer* Buffer9::getRenderer()
+{
+    return mRenderer;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Buffer9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Buffer9.h
new file mode 100644
index 0000000000..e78182f905
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Buffer9.h
@@ -0,0 +1,52 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Buffer9.h: Defines the rx::Buffer9 class which implements rx::BufferImpl via rx::BufferD3D.
+
+#ifndef LIBGLESV2_RENDERER_BUFFER9_H_
+#define LIBGLESV2_RENDERER_BUFFER9_H_
+
+#include "libGLESv2/renderer/d3d/BufferD3D.h"
+#include "libGLESv2/renderer/d3d/MemoryBuffer.h"
+#include "libGLESv2/angletypes.h"
+
+namespace rx
+{
+class Renderer9;
+
+class Buffer9 : public BufferD3D
+{
+  public:
+    Buffer9(rx::Renderer9 *renderer);
+    virtual ~Buffer9();
+
+    static Buffer9 *makeBuffer9(BufferImpl *buffer);
+
+    // BufferD3D implementation
+    virtual size_t getSize() const { return mSize; }
+    virtual bool supportsDirectBinding() const { return false; }
+    virtual Renderer* getRenderer();
+
+    // BufferImpl implementation
+    virtual gl::Error setData(const void* data, size_t size, GLenum usage);
+    virtual void *getData();
+    virtual gl::Error setSubData(const void* data, size_t size, size_t offset);
+    virtual gl::Error copySubData(BufferImpl* source, GLintptr sourceOffset, GLintptr destOffset, GLsizeiptr size);
+    virtual gl::Error map(size_t offset, size_t length, GLbitfield access, GLvoid **mapPtr);
+    virtual gl::Error unmap();
+    virtual void markTransformFeedbackUsage();
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Buffer9);
+
+    rx::Renderer9 *mRenderer;
+    MemoryBuffer mMemory;
+    size_t mSize;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_BUFFER9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Fence9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Fence9.cpp
new file mode 100644
index 0000000000..e352a5f50a
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Fence9.cpp
@@ -0,0 +1,72 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Fence9.cpp: Defines the rx::Fence9 class.
+
+#include "libGLESv2/renderer/d3d/d3d9/Fence9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+Fence9::Fence9(rx::Renderer9 *renderer)
+{
+    mRenderer = renderer;
+    mQuery = NULL;
+}
+
+Fence9::~Fence9()
+{
+    SafeRelease(mQuery);
+}
+
+bool Fence9::isSet() const
+{
+    return mQuery != NULL;
+}
+
+void Fence9::set()
+{
+    if (!mQuery)
+    {
+        mQuery = mRenderer->allocateEventQuery();
+        if (!mQuery)
+        {
+            return gl::error(GL_OUT_OF_MEMORY);
+        }
+    }
+
+    HRESULT result = mQuery->Issue(D3DISSUE_END);
+    UNUSED_ASSERTION_VARIABLE(result);
+    ASSERT(SUCCEEDED(result));
+}
+
+bool Fence9::test(bool flushCommandBuffer)
+{
+    ASSERT(mQuery);
+
+    DWORD getDataFlags = (flushCommandBuffer ? D3DGETDATA_FLUSH : 0);
+    HRESULT result = mQuery->GetData(NULL, 0, getDataFlags);
+
+    if (d3d9::isDeviceLostError(result))
+    {
+        mRenderer->notifyDeviceLost();
+        return gl::error(GL_OUT_OF_MEMORY, true);
+    }
+
+    ASSERT(result == S_OK || result == S_FALSE);
+
+    return (result == S_OK);
+}
+
+bool Fence9::hasError() const
+{
+    return mRenderer->isDeviceLost();
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Fence9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Fence9.h
index 9f17641e51..e923a2178c 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Fence9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Fence9.h
@@ -21,11 +21,10 @@ class Fence9 : public FenceImpl
     explicit Fence9(rx::Renderer9 *renderer);
     virtual ~Fence9();
 
-    GLboolean isFence();
-    void setFence(GLenum condition);
-    GLboolean testFence();
-    void finishFence();
-    void getFenceiv(GLenum pname, GLint *params);
+    bool isSet() const;
+    void set();
+    bool test(bool flushCommandBuffer);
+    bool hasError() const;
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Fence9);
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Image9.cpp
index cd12d8cc9e..18383fba78 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Image9.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -8,17 +7,17 @@
 // Image9.cpp: Implements the rx::Image9 class, which acts as the interface to
 // the actual underlying surfaces of a Texture.
 
-#include "libGLESv2/renderer/d3d9/Image9.h"
-
+#include "libGLESv2/renderer/d3d/d3d9/Image9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/RenderTarget9.h"
+#include "libGLESv2/renderer/d3d/d3d9/TextureStorage9.h"
 #include "libGLESv2/main.h"
 #include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
 #include "libGLESv2/Renderbuffer.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-#include "libGLESv2/renderer/d3d9/RenderTarget9.h"
-#include "libGLESv2/renderer/d3d9/TextureStorage9.h"
 
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/renderer/generatemip.h"
 
 namespace rx
 {
@@ -34,10 +33,7 @@ Image9::Image9()
 
 Image9::~Image9()
 {
-    if (mSurface)
-    {
-        mSurface->Release();
-    }
+    SafeRelease(mSurface);
 }
 
 void Image9::generateMip(IDirect3DSurface9 *destSurface, IDirect3DSurface9 *sourceSurface)
@@ -54,6 +50,9 @@ void Image9::generateMip(IDirect3DSurface9 *destSurface, IDirect3DSurface9 *sour
     ASSERT(sourceDesc.Width == 1 || sourceDesc.Width / 2 == destDesc.Width);
     ASSERT(sourceDesc.Height == 1 || sourceDesc.Height / 2 == destDesc.Height);
 
+    const d3d9::D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(sourceDesc.Format);
+    ASSERT(d3dFormatInfo.mipGenerationFunction != NULL);
+
     D3DLOCKED_RECT sourceLocked = {0};
     result = sourceSurface->LockRect(&sourceLocked, NULL, D3DLOCK_READONLY);
     ASSERT(SUCCEEDED(result));
@@ -62,37 +61,17 @@ void Image9::generateMip(IDirect3DSurface9 *destSurface, IDirect3DSurface9 *sour
     result = destSurface->LockRect(&destLocked, NULL, 0);
     ASSERT(SUCCEEDED(result));
 
-    const unsigned char *sourceData = reinterpret_cast<const unsigned char*>(sourceLocked.pBits);
-    unsigned char *destData = reinterpret_cast<unsigned char*>(destLocked.pBits);
+    const uint8_t *sourceData = reinterpret_cast<const uint8_t*>(sourceLocked.pBits);
+    uint8_t *destData = reinterpret_cast<uint8_t*>(destLocked.pBits);
 
     if (sourceData && destData)
     {
-        switch (sourceDesc.Format)
-        {
-          case D3DFMT_L8:
-            GenerateMip<L8>(sourceDesc.Width, sourceDesc.Height, sourceData, sourceLocked.Pitch, destData, destLocked.Pitch);
-            break;
-          case D3DFMT_A8L8:
-            GenerateMip<A8L8>(sourceDesc.Width, sourceDesc.Height, sourceData, sourceLocked.Pitch, destData, destLocked.Pitch);
-            break;
-          case D3DFMT_A8R8G8B8:
-          case D3DFMT_X8R8G8B8:
-            GenerateMip<A8R8G8B8>(sourceDesc.Width, sourceDesc.Height, sourceData, sourceLocked.Pitch, destData, destLocked.Pitch);
-            break;
-          case D3DFMT_A16B16G16R16F:
-            GenerateMip<A16B16G16R16F>(sourceDesc.Width, sourceDesc.Height, sourceData, sourceLocked.Pitch, destData, destLocked.Pitch);
-            break;
-          case D3DFMT_A32B32G32R32F:
-            GenerateMip<A32B32G32R32F>(sourceDesc.Width, sourceDesc.Height, sourceData, sourceLocked.Pitch, destData, destLocked.Pitch);
-            break;
-          default:
-            UNREACHABLE();
-            break;
-        }
-
-        destSurface->UnlockRect();
-        sourceSurface->UnlockRect();
+        d3dFormatInfo.mipGenerationFunction(sourceDesc.Width, sourceDesc.Height, 1, sourceData, sourceLocked.Pitch, 0,
+                                            destData, destLocked.Pitch, 0);
     }
+
+    destSurface->UnlockRect();
+    sourceSurface->UnlockRect();
 }
 
 Image9 *Image9::makeImage9(Image *img)
@@ -117,20 +96,23 @@ void Image9::copyLockableSurfaces(IDirect3DSurface9 *dest, IDirect3DSurface9 *so
 {
     D3DLOCKED_RECT sourceLock = {0};
     D3DLOCKED_RECT destLock = {0};
-    
+
     source->LockRect(&sourceLock, NULL, 0);
     dest->LockRect(&destLock, NULL, 0);
-    
+
     if (sourceLock.pBits && destLock.pBits)
     {
         D3DSURFACE_DESC desc;
         source->GetDesc(&desc);
 
-        int rows = d3d9::IsCompressedFormat(desc.Format) ? desc.Height / 4 : desc.Height;
-        int bytes = d3d9::ComputeRowSize(desc.Format, desc.Width);
-        ASSERT(bytes <= sourceLock.Pitch && bytes <= destLock.Pitch);
+        const d3d9::D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(desc.Format);
+        unsigned int rows = desc.Height / d3dFormatInfo.blockHeight;
+
+        unsigned int bytes = d3d9::ComputeBlockSize(desc.Format, desc.Width, d3dFormatInfo.blockHeight);
+        ASSERT(bytes <= static_cast<unsigned int>(sourceLock.Pitch) &&
+               bytes <= static_cast<unsigned int>(destLock.Pitch));
 
-        for(int i = 0; i < rows; i++)
+        for(unsigned int i = 0; i < rows; i++)
         {
             memcpy((char*)destLock.pBits + destLock.Pitch * i, (char*)sourceLock.pBits + sourceLock.Pitch * i, bytes);
         }
@@ -141,10 +123,17 @@ void Image9::copyLockableSurfaces(IDirect3DSurface9 *dest, IDirect3DSurface9 *so
     else UNREACHABLE();
 }
 
-bool Image9::redefine(rx::Renderer *renderer, GLint internalformat, GLsizei width, GLsizei height, bool forceRelease)
+bool Image9::redefine(rx::Renderer *renderer, GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, bool forceRelease)
 {
+    // 3D textures are not supported by the D3D9 backend.
+    ASSERT(depth <= 1);
+
+    // Only 2D and cube texture are supported by the D3D9 backend.
+    ASSERT(target == GL_TEXTURE_2D || target == GL_TEXTURE_CUBE_MAP);
+
     if (mWidth != width ||
         mHeight != height ||
+        mDepth != depth ||
         mInternalFormat != internalformat ||
         forceRelease)
     {
@@ -152,16 +141,18 @@ bool Image9::redefine(rx::Renderer *renderer, GLint internalformat, GLsizei widt
 
         mWidth = width;
         mHeight = height;
+        mDepth = depth;
         mInternalFormat = internalformat;
+
         // compute the d3d format that will be used
-        mD3DFormat = mRenderer->ConvertTextureInternalFormat(internalformat);
-        mActualFormat = d3d9_gl::GetEquivalentFormat(mD3DFormat);
+        const d3d9::TextureFormat &d3d9FormatInfo = d3d9::GetTextureFormatInfo(internalformat);
+        const d3d9::D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(d3d9FormatInfo.texFormat);
+        mD3DFormat = d3d9FormatInfo.texFormat;
+        mActualFormat = d3dFormatInfo.internalFormat;
+        mRenderable = (d3d9FormatInfo.renderFormat != D3DFMT_UNKNOWN);
 
-        if (mSurface)
-        {
-            mSurface->Release();
-            mSurface = NULL;
-        }
+        SafeRelease(mSurface);
+        mDirty = (d3d9FormatInfo.dataInitializerFunction != NULL);
 
         return true;
     }
@@ -180,14 +171,13 @@ void Image9::createSurface()
     IDirect3DSurface9 *newSurface = NULL;
     const D3DPOOL poolToUse = D3DPOOL_SYSTEMMEM;
     const D3DFORMAT d3dFormat = getD3DFormat();
-    ASSERT(d3dFormat != D3DFMT_INTZ); // We should never get here for depth textures
 
     if (mWidth != 0 && mHeight != 0)
     {
         int levelToFetch = 0;
         GLsizei requestWidth = mWidth;
         GLsizei requestHeight = mHeight;
-        gl::MakeValidSize(true, gl::IsCompressed(mInternalFormat), &requestWidth, &requestHeight, &levelToFetch);
+        d3d9::MakeValidSize(true, d3dFormat, &requestWidth, &requestHeight, &levelToFetch);
 
         IDirect3DDevice9 *device = mRenderer->getDevice();
 
@@ -202,7 +192,27 @@ void Image9::createSurface()
         }
 
         newTexture->GetSurfaceLevel(levelToFetch, &newSurface);
-        newTexture->Release();
+        SafeRelease(newTexture);
+
+        const d3d9::TextureFormat &d3dFormatInfo = d3d9::GetTextureFormatInfo(mInternalFormat);
+        if (d3dFormatInfo.dataInitializerFunction != NULL)
+        {
+            RECT entireRect;
+            entireRect.left = 0;
+            entireRect.right = mWidth;
+            entireRect.top = 0;
+            entireRect.bottom = mHeight;
+
+            D3DLOCKED_RECT lockedRect;
+            result = newSurface->LockRect(&lockedRect, &entireRect, 0);
+            ASSERT(SUCCEEDED(result));
+
+            d3dFormatInfo.dataInitializerFunction(mWidth, mHeight, 1, reinterpret_cast<uint8_t*>(lockedRect.pBits),
+                                                  lockedRect.Pitch, 0);
+
+            result = newSurface->UnlockRect();
+            ASSERT(SUCCEEDED(result));
+        }
     }
 
     mSurface = newSurface;
@@ -232,15 +242,11 @@ void Image9::unlock()
     if (mSurface)
     {
         HRESULT result = mSurface->UnlockRect();
+        UNUSED_ASSERTION_VARIABLE(result);
         ASSERT(SUCCEEDED(result));
     }
 }
 
-bool Image9::isRenderableFormat() const
-{    
-    return TextureStorage9::IsTextureFormatRenderable(getD3DFormat());
-}
-
 D3DFORMAT Image9::getD3DFormat() const
 {
     // this should only happen if the image hasn't been redefined first
@@ -250,6 +256,13 @@ D3DFORMAT Image9::getD3DFormat() const
     return mD3DFormat;
 }
 
+bool Image9::isDirty() const
+{
+    // Make sure to that this image is marked as dirty even if the staging texture hasn't been created yet
+    // if initialization is required before use.
+    return (mSurface || d3d9::GetTextureFormatInfo(mInternalFormat).dataInitializerFunction != NULL) && mDirty;
+}
+
 IDirect3DSurface9 *Image9::getSurface()
 {
     createSurface();
@@ -257,15 +270,15 @@ IDirect3DSurface9 *Image9::getSurface()
     return mSurface;
 }
 
-void Image9::setManagedSurface(TextureStorageInterface2D *storage, int level)
+void Image9::setManagedSurface2D(TextureStorage *storage, int level)
 {
-    TextureStorage9_2D *storage9 = TextureStorage9_2D::makeTextureStorage9_2D(storage->getStorageInstance());
+    TextureStorage9_2D *storage9 = TextureStorage9_2D::makeTextureStorage9_2D(storage);
     setManagedSurface(storage9->getSurfaceLevel(level, false));
 }
 
-void Image9::setManagedSurface(TextureStorageInterfaceCube *storage, int face, int level)
+void Image9::setManagedSurfaceCube(TextureStorage *storage, int face, int level)
 {
-    TextureStorage9_Cube *storage9 = TextureStorage9_Cube::makeTextureStorage9_Cube(storage->getStorageInstance());
+    TextureStorage9_Cube *storage9 = TextureStorage9_Cube::makeTextureStorage9_Cube(storage);
     setManagedSurface(storage9->getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level, false));
 }
 
@@ -280,7 +293,7 @@ void Image9::setManagedSurface(IDirect3DSurface9 *surface)
         if (mSurface)
         {
             copyLockableSurfaces(surface, mSurface);
-            mSurface->Release();
+            SafeRelease(mSurface);
         }
 
         mSurface = surface;
@@ -288,22 +301,38 @@ void Image9::setManagedSurface(IDirect3DSurface9 *surface)
     }
 }
 
-bool Image9::updateSurface(TextureStorageInterface2D *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+bool Image9::copyToStorage2D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
 {
     ASSERT(getSurface() != NULL);
-    TextureStorage9_2D *storage9 = TextureStorage9_2D::makeTextureStorage9_2D(storage->getStorageInstance());
-    return updateSurface(storage9->getSurfaceLevel(level, true), xoffset, yoffset, width, height);
+    TextureStorage9_2D *storage9 = TextureStorage9_2D::makeTextureStorage9_2D(storage);
+    return copyToSurface(storage9->getSurfaceLevel(level, true), xoffset, yoffset, width, height);
 }
 
-bool Image9::updateSurface(TextureStorageInterfaceCube *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+bool Image9::copyToStorageCube(TextureStorage *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
 {
     ASSERT(getSurface() != NULL);
-    TextureStorage9_Cube *storage9 = TextureStorage9_Cube::makeTextureStorage9_Cube(storage->getStorageInstance());
-    return updateSurface(storage9->getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level, true), xoffset, yoffset, width, height);
+    TextureStorage9_Cube *storage9 = TextureStorage9_Cube::makeTextureStorage9_Cube(storage);
+    return copyToSurface(storage9->getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level, true), xoffset, yoffset, width, height);
+}
+
+bool Image9::copyToStorage3D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth)
+{
+    // 3D textures are not supported by the D3D9 backend.
+    UNREACHABLE();
+    return false;
 }
 
-bool Image9::updateSurface(IDirect3DSurface9 *destSurface, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+bool Image9::copyToStorage2DArray(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height)
 {
+    // 2D array textures are not supported by the D3D9 backend.
+    UNREACHABLE();
+    return false;
+}
+
+bool Image9::copyToSurface(IDirect3DSurface9 *destSurface, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
+{
+    ASSERT(width > 0 && height > 0);
+
     if (!destSurface)
         return false;
 
@@ -334,26 +363,36 @@ bool Image9::updateSurface(IDirect3DSurface9 *destSurface, GLint xoffset, GLint
                 copyLockableSurfaces(surf, sourceSurface);
                 result = device->UpdateSurface(surf, &rect, destSurface, &point);
                 ASSERT(SUCCEEDED(result));
-                surf->Release();
+                SafeRelease(surf);
             }
         }
         else
         {
-            // UpdateSurface: source must be SYSTEMMEM, dest must be DEFAULT pools 
+            // UpdateSurface: source must be SYSTEMMEM, dest must be DEFAULT pools
             HRESULT result = device->UpdateSurface(sourceSurface, &rect, destSurface, &point);
+            UNUSED_ASSERTION_VARIABLE(result);
             ASSERT(SUCCEEDED(result));
         }
     }
 
-    destSurface->Release();
+    SafeRelease(destSurface);
     return true;
 }
 
 // Store the pixel rectangle designated by xoffset,yoffset,width,height with pixels stored as format/type at input
 // into the target pixel rectangle.
-void Image9::loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                      GLint unpackAlignment, const void *input)
+void Image9::loadData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                      GLint unpackAlignment, GLenum type, const void *input)
 {
+    // 3D textures are not supported by the D3D9 backend.
+    ASSERT(zoffset == 0 && depth == 1);
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(mInternalFormat);
+    GLsizei inputRowPitch = formatInfo.computeRowPitch(type, width, unpackAlignment);
+
+    const d3d9::TextureFormat &d3dFormatInfo = d3d9::GetTextureFormatInfo(mInternalFormat);
+    ASSERT(d3dFormatInfo.loadFunction != NULL);
+
     RECT lockRect =
     {
         xoffset, yoffset,
@@ -367,100 +406,32 @@ void Image9::loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei heigh
         return;
     }
 
-
-    GLsizei inputPitch = gl::ComputePitch(width, mInternalFormat, unpackAlignment);
-
-    switch (mInternalFormat)
-    {
-      case GL_ALPHA8_EXT:
-#if defined(__SSE2__)
-        if (gl::supportsSSE2())
-        {
-            loadAlphaDataToBGRASSE2(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        }
-        else
-#endif
-        {
-            loadAlphaDataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        }
-        break;
-      case GL_LUMINANCE8_EXT:
-        loadLuminanceDataToNativeOrBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits, getD3DFormat() == D3DFMT_L8);
-        break;
-      case GL_ALPHA32F_EXT:
-        loadAlphaFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_LUMINANCE32F_EXT:
-        loadLuminanceFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_ALPHA16F_EXT:
-        loadAlphaHalfFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_LUMINANCE16F_EXT:
-        loadLuminanceHalfFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_LUMINANCE8_ALPHA8_EXT:
-        loadLuminanceAlphaDataToNativeOrBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits, getD3DFormat() == D3DFMT_A8L8);
-        break;
-      case GL_LUMINANCE_ALPHA32F_EXT:
-        loadLuminanceAlphaFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_LUMINANCE_ALPHA16F_EXT:
-        loadLuminanceAlphaHalfFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGB8_OES:
-        loadRGBUByteDataToBGRX(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGB565:
-        loadRGB565DataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGBA8_OES:
-#if defined(__SSE2__)
-        if (gl::supportsSSE2())
-        {
-            loadRGBAUByteDataToBGRASSE2(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        }
-        else
-#endif
-        {
-            loadRGBAUByteDataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        }
-        break;
-      case GL_RGBA4:
-        loadRGBA4444DataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGB5_A1:
-        loadRGBA5551DataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_BGRA8_EXT:
-        loadBGRADataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      // float textures are converted to RGBA, not BGRA, as they're stored that way in D3D
-      case GL_RGB32F_EXT:
-        loadRGBFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGB16F_EXT:
-        loadRGBHalfFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGBA32F_EXT:
-        loadRGBAFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      case GL_RGBA16F_EXT:
-        loadRGBAHalfFloatDataToRGBA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-        break;
-      default: UNREACHABLE(); 
-    }
+    d3dFormatInfo.loadFunction(width, height, depth,
+                               reinterpret_cast<const uint8_t*>(input), inputRowPitch, 0,
+                               reinterpret_cast<uint8_t*>(locked.pBits), locked.Pitch, 0);
 
     unlock();
 }
 
-void Image9::loadCompressedData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
+void Image9::loadCompressedData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
                                 const void *input)
 {
-    ASSERT(xoffset % 4 == 0);
-    ASSERT(yoffset % 4 == 0);
+    // 3D textures are not supported by the D3D9 backend.
+    ASSERT(zoffset == 0 && depth == 1);
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(mInternalFormat);
+    GLsizei inputRowPitch = formatInfo.computeRowPitch(GL_UNSIGNED_BYTE, width, 1);
+    GLsizei inputDepthPitch = formatInfo.computeDepthPitch(GL_UNSIGNED_BYTE, width, height, 1);
+
+    const d3d9::TextureFormat &d3d9FormatInfo = d3d9::GetTextureFormatInfo(mInternalFormat);
+
+    ASSERT(xoffset % d3d9::GetD3DFormatInfo(d3d9FormatInfo.texFormat).blockWidth == 0);
+    ASSERT(yoffset % d3d9::GetD3DFormatInfo(d3d9FormatInfo.texFormat).blockHeight == 0);
 
-    RECT lockRect = {
+    ASSERT(d3d9FormatInfo.loadFunction != NULL);
+
+    RECT lockRect =
+    {
         xoffset, yoffset,
         xoffset + width, yoffset + height
     };
@@ -472,29 +443,28 @@ void Image9::loadCompressedData(GLint xoffset, GLint yoffset, GLsizei width, GLs
         return;
     }
 
-    GLsizei inputSize = gl::ComputeCompressedSize(width, height, mInternalFormat);
-    GLsizei inputPitch = gl::ComputeCompressedPitch(width, mInternalFormat);
-    int rows = inputSize / inputPitch;
-    for (int i = 0; i < rows; ++i)
-    {
-        memcpy((void*)((BYTE*)locked.pBits + i * locked.Pitch), (void*)((BYTE*)input + i * inputPitch), inputPitch);
-    }
+    d3d9FormatInfo.loadFunction(width, height, depth,
+                                reinterpret_cast<const uint8_t*>(input), inputRowPitch, inputDepthPitch,
+                                reinterpret_cast<uint8_t*>(locked.pBits), locked.Pitch, 0);
 
     unlock();
 }
 
 // This implements glCopyTex[Sub]Image2D for non-renderable internal texture formats and incomplete textures
-void Image9::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
+void Image9::copy(GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
 {
+    // ES3.0 only behaviour to copy into a 3d texture
+    ASSERT(zoffset == 0);
+
     RenderTarget9 *renderTarget = NULL;
     IDirect3DSurface9 *surface = NULL;
-    gl::Renderbuffer *colorbuffer = source->getColorbuffer(0);
+    gl::FramebufferAttachment *colorbuffer = source->getColorbuffer(0);
 
     if (colorbuffer)
     {
-        renderTarget = RenderTarget9::makeRenderTarget9(colorbuffer->getRenderTarget());
+        renderTarget = d3d9::GetAttachmentRenderTarget(colorbuffer);
     }
-    
+
     if (renderTarget)
     {
         surface = renderTarget->getSurface();
@@ -511,13 +481,13 @@ void Image9::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width,
     IDirect3DSurface9 *renderTargetData = NULL;
     D3DSURFACE_DESC description;
     surface->GetDesc(&description);
-    
+
     HRESULT result = device->CreateOffscreenPlainSurface(description.Width, description.Height, description.Format, D3DPOOL_SYSTEMMEM, &renderTargetData, NULL);
 
     if (FAILED(result))
     {
         ERR("Could not create matching destination surface.");
-        surface->Release();
+        SafeRelease(surface);
         return gl::error(GL_OUT_OF_MEMORY);
     }
 
@@ -526,8 +496,8 @@ void Image9::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width,
     if (FAILED(result))
     {
         ERR("GetRenderTargetData unexpectedly failed.");
-        renderTargetData->Release();
-        surface->Release();
+        SafeRelease(renderTargetData);
+        SafeRelease(surface);
         return gl::error(GL_OUT_OF_MEMORY);
     }
 
@@ -540,20 +510,20 @@ void Image9::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width,
     if (FAILED(result))
     {
         ERR("Failed to lock the source surface (rectangle might be invalid).");
-        renderTargetData->Release();
-        surface->Release();
+        SafeRelease(renderTargetData);
+        SafeRelease(surface);
         return gl::error(GL_OUT_OF_MEMORY);
     }
 
     D3DLOCKED_RECT destLock = {0};
     result = lock(&destLock, &destRect);
-    
+
     if (FAILED(result))
     {
         ERR("Failed to lock the destination surface (rectangle might be invalid).");
         renderTargetData->UnlockRect();
-        renderTargetData->Release();
-        surface->Release();
+        SafeRelease(renderTargetData);
+        SafeRelease(surface);
         return gl::error(GL_OUT_OF_MEMORY);
     }
 
@@ -727,8 +697,8 @@ void Image9::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width,
     unlock();
     renderTargetData->UnlockRect();
 
-    renderTargetData->Release();
-    surface->Release();
+    SafeRelease(renderTargetData);
+    SafeRelease(surface);
 
     mDirty = true;
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Image9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Image9.h
new file mode 100644
index 0000000000..08d8ee3545
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Image9.h
@@ -0,0 +1,78 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Image9.h: Defines the rx::Image9 class, which acts as the interface to
+// the actual underlying surfaces of a Texture.
+
+#ifndef LIBGLESV2_RENDERER_IMAGE9_H_
+#define LIBGLESV2_RENDERER_IMAGE9_H_
+
+#include "libGLESv2/renderer/d3d/ImageD3D.h"
+#include "common/debug.h"
+
+namespace gl
+{
+class Framebuffer;
+}
+
+namespace rx
+{
+class Renderer;
+class Renderer9;
+
+class Image9 : public ImageD3D
+{
+  public:
+    Image9();
+    ~Image9();
+
+    static Image9 *makeImage9(Image *img);
+
+    static void generateMipmap(Image9 *dest, Image9 *source);
+    static void generateMip(IDirect3DSurface9 *destSurface, IDirect3DSurface9 *sourceSurface);
+    static void copyLockableSurfaces(IDirect3DSurface9 *dest, IDirect3DSurface9 *source);
+
+    virtual bool redefine(Renderer *renderer, GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, bool forceRelease);
+
+    D3DFORMAT getD3DFormat() const;
+
+    virtual bool isDirty() const;
+    IDirect3DSurface9 *getSurface();
+
+    virtual void setManagedSurface2D(TextureStorage *storage, int level);
+    virtual void setManagedSurfaceCube(TextureStorage *storage, int face, int level);
+    virtual bool copyToStorage2D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+    virtual bool copyToStorageCube(TextureStorage *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+    virtual bool copyToStorage3D(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
+    virtual bool copyToStorage2DArray(TextureStorage *storage, int level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height);
+
+    virtual void loadData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                          GLint unpackAlignment, GLenum type, const void *input);
+    virtual void loadCompressedData(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                                    const void *input);
+
+    virtual void copy(GLint xoffset, GLint yoffset, GLint zoffset,GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Image9);
+
+    void createSurface();
+    void setManagedSurface(IDirect3DSurface9 *surface);
+    bool copyToSurface(IDirect3DSurface9 *dest, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
+
+    HRESULT lock(D3DLOCKED_RECT *lockedRect, const RECT *rect);
+    void unlock();
+    
+    Renderer9 *mRenderer;
+
+    D3DPOOL mD3DPool;   // can only be D3DPOOL_SYSTEMMEM or D3DPOOL_MANAGED since it needs to be lockable.
+    D3DFORMAT mD3DFormat;
+
+    IDirect3DSurface9 *mSurface;
+};
+}
+
+#endif   // LIBGLESV2_RENDERER_IMAGE9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.cpp
new file mode 100644
index 0000000000..1c51b9e985
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.cpp
@@ -0,0 +1,173 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Indexffer9.cpp: Defines the D3D9 IndexBuffer implementation.
+
+#include "libGLESv2/renderer/d3d/d3d9/IndexBuffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+
+namespace rx
+{
+
+IndexBuffer9::IndexBuffer9(Renderer9 *const renderer) : mRenderer(renderer)
+{
+    mIndexBuffer = NULL;
+    mBufferSize = 0;
+    mIndexType = 0;
+    mDynamic = false;
+}
+
+IndexBuffer9::~IndexBuffer9()
+{
+    SafeRelease(mIndexBuffer);
+}
+
+gl::Error IndexBuffer9::initialize(unsigned int bufferSize, GLenum indexType, bool dynamic)
+{
+    SafeRelease(mIndexBuffer);
+
+    updateSerial();
+
+    if (bufferSize > 0)
+    {
+        D3DFORMAT format = D3DFMT_UNKNOWN;
+        if (indexType == GL_UNSIGNED_SHORT || indexType == GL_UNSIGNED_BYTE)
+        {
+            format = D3DFMT_INDEX16;
+        }
+        else if (indexType == GL_UNSIGNED_INT)
+        {
+            ASSERT(mRenderer->getRendererExtensions().elementIndexUint);
+            format = D3DFMT_INDEX32;
+        }
+        else UNREACHABLE();
+
+        DWORD usageFlags = D3DUSAGE_WRITEONLY;
+        if (dynamic)
+        {
+            usageFlags |= D3DUSAGE_DYNAMIC;
+        }
+
+        HRESULT result = mRenderer->createIndexBuffer(bufferSize, usageFlags, format, &mIndexBuffer);
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal index buffer of size, %lu.", bufferSize);
+        }
+    }
+
+    mBufferSize = bufferSize;
+    mIndexType = indexType;
+    mDynamic = dynamic;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+IndexBuffer9 *IndexBuffer9::makeIndexBuffer9(IndexBuffer *indexBuffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(IndexBuffer9*, indexBuffer));
+    return static_cast<IndexBuffer9*>(indexBuffer);
+}
+
+gl::Error IndexBuffer9::mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory)
+{
+    if (!mIndexBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal index buffer is not initialized.");
+    }
+
+    DWORD lockFlags = mDynamic ? D3DLOCK_NOOVERWRITE : 0;
+
+    void *mapPtr = NULL;
+    HRESULT result = mIndexBuffer->Lock(offset, size, &mapPtr, lockFlags);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to lock internal index buffer, HRESULT: 0x%08x.", result);
+    }
+
+    *outMappedMemory = mapPtr;
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error IndexBuffer9::unmapBuffer()
+{
+    if (!mIndexBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal index buffer is not initialized.");
+    }
+
+    HRESULT result = mIndexBuffer->Unlock();
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to unlock internal index buffer, HRESULT: 0x%08x.", result);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+GLenum IndexBuffer9::getIndexType() const
+{
+    return mIndexType;
+}
+
+unsigned int IndexBuffer9::getBufferSize() const
+{
+    return mBufferSize;
+}
+
+gl::Error IndexBuffer9::setSize(unsigned int bufferSize, GLenum indexType)
+{
+    if (bufferSize > mBufferSize || indexType != mIndexType)
+    {
+        return initialize(bufferSize, indexType, mDynamic);
+    }
+    else
+    {
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+gl::Error IndexBuffer9::discard()
+{
+    if (!mIndexBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal index buffer is not initialized.");
+    }
+
+    void *dummy;
+    HRESULT result;
+
+    result = mIndexBuffer->Lock(0, 1, &dummy, D3DLOCK_DISCARD);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to lock internal index buffer, HRESULT: 0x%08x.", result);
+    }
+
+    result = mIndexBuffer->Unlock();
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to unlock internal index buffer, HRESULT: 0x%08x.", result);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+D3DFORMAT IndexBuffer9::getIndexFormat() const
+{
+    switch (mIndexType)
+    {
+      case GL_UNSIGNED_BYTE:    return D3DFMT_INDEX16;
+      case GL_UNSIGNED_SHORT:   return D3DFMT_INDEX16;
+      case GL_UNSIGNED_INT:     return D3DFMT_INDEX32;
+      default: UNREACHABLE();   return D3DFMT_UNKNOWN;
+    }
+}
+
+IDirect3DIndexBuffer9 * IndexBuffer9::getBuffer() const
+{
+    return mIndexBuffer;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/IndexBuffer9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.h
index 6801867532..d0970d6ac5 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/IndexBuffer9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.h
@@ -9,7 +9,7 @@
 #ifndef LIBGLESV2_RENDERER_INDEXBUFFER9_H_
 #define LIBGLESV2_RENDERER_INDEXBUFFER9_H_
 
-#include "libGLESv2/renderer/IndexBuffer.h"
+#include "libGLESv2/renderer/d3d/IndexBuffer.h"
 
 namespace rx
 {
@@ -21,18 +21,18 @@ class IndexBuffer9 : public IndexBuffer
     explicit IndexBuffer9(Renderer9 *const renderer);
     virtual ~IndexBuffer9();
 
-    virtual bool initialize(unsigned int bufferSize, GLenum indexType, bool dynamic);
+    virtual gl::Error initialize(unsigned int bufferSize, GLenum indexType, bool dynamic);
 
     static IndexBuffer9 *makeIndexBuffer9(IndexBuffer *indexBuffer);
 
-    virtual bool mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory);
-    virtual bool unmapBuffer();
+    virtual gl::Error mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory);
+    virtual gl::Error unmapBuffer();
 
     virtual GLenum getIndexType() const;
     virtual unsigned int getBufferSize() const;
-    virtual bool setSize(unsigned int bufferSize, GLenum indexType);
+    virtual gl::Error setSize(unsigned int bufferSize, GLenum indexType);
 
-    virtual bool discard();
+    virtual gl::Error discard();
 
     D3DFORMAT getIndexFormat() const;
     IDirect3DIndexBuffer9 *getBuffer() const;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Query9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Query9.cpp
new file mode 100644
index 0000000000..815fc01a9b
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Query9.cpp
@@ -0,0 +1,144 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Query9.cpp: Defines the rx::Query9 class which implements rx::QueryImpl.
+
+#include "libGLESv2/renderer/d3d/d3d9/Query9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/main.h"
+
+#include <GLES2/gl2ext.h>
+
+namespace rx
+{
+Query9::Query9(rx::Renderer9 *renderer, GLenum type)
+    : QueryImpl(type),
+      mResult(GL_FALSE),
+      mQueryFinished(false),
+      mRenderer(renderer),
+      mQuery(NULL)
+{
+}
+
+Query9::~Query9()
+{
+    SafeRelease(mQuery);
+}
+
+gl::Error Query9::begin()
+{
+    if (mQuery == NULL)
+    {
+        HRESULT result = mRenderer->getDevice()->CreateQuery(D3DQUERYTYPE_OCCLUSION, &mQuery);
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Internal query creation failed, result: 0x%X.", result);
+        }
+    }
+
+    HRESULT result = mQuery->Issue(D3DISSUE_BEGIN);
+    ASSERT(SUCCEEDED(result));
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to begin internal query, result: 0x%X.", result);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query9::end()
+{
+    ASSERT(mQuery);
+
+    HRESULT result = mQuery->Issue(D3DISSUE_END);
+    ASSERT(SUCCEEDED(result));
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to end internal query, result: 0x%X.", result);
+    }
+
+    mQueryFinished = false;
+    mResult = GL_FALSE;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query9::getResult(GLuint *params)
+{
+    while (!mQueryFinished)
+    {
+        gl::Error error = testQuery();
+        if (error.isError())
+        {
+            return error;
+        }
+
+        if (!mQueryFinished)
+        {
+            Sleep(0);
+        }
+    }
+
+    ASSERT(mQueryFinished);
+    *params = mResult;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query9::isResultAvailable(GLuint *available)
+{
+    gl::Error error = testQuery();
+    if (error.isError())
+    {
+        return error;
+    }
+
+    *available = (mQueryFinished ? GL_TRUE : GL_FALSE);
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Query9::testQuery()
+{
+    if (!mQueryFinished)
+    {
+        ASSERT(mQuery);
+
+        DWORD numPixels = 0;
+
+        HRESULT hres = mQuery->GetData(&numPixels, sizeof(DWORD), D3DGETDATA_FLUSH);
+        if (hres == S_OK)
+        {
+            mQueryFinished = true;
+
+            switch (getType())
+            {
+              case GL_ANY_SAMPLES_PASSED_EXT:
+              case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
+                mResult = (numPixels > 0) ? GL_TRUE : GL_FALSE;
+                break;
+
+              default:
+                UNREACHABLE();
+                break;
+            }
+        }
+        else if (d3d9::isDeviceLostError(hres))
+        {
+            mRenderer->notifyDeviceLost();
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to test get query result, device is lost.");
+        }
+        else if (mRenderer->testDeviceLost(true))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to test get query result, device is lost.");
+        }
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Query9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Query9.h
index 47eef89336..513e0ba6fd 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Query9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Query9.h
@@ -21,15 +21,18 @@ class Query9 : public QueryImpl
     Query9(rx::Renderer9 *renderer, GLenum type);
     virtual ~Query9();
 
-    void begin();
-    void end();
-    GLuint getResult();
-    GLboolean isResultAvailable();
+    virtual gl::Error begin();
+    virtual gl::Error end();
+    virtual gl::Error getResult(GLuint *params);
+    virtual gl::Error isResultAvailable(GLuint *available);
 
   private:
     DISALLOW_COPY_AND_ASSIGN(Query9);
 
-    GLboolean testQuery();
+    gl::Error testQuery();
+
+    GLuint mResult;
+    bool mQueryFinished;
 
     rx::Renderer9 *mRenderer;
     IDirect3DQuery9 *mQuery;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.cpp
new file mode 100644
index 0000000000..13321ac8cd
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.cpp
@@ -0,0 +1,133 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// RenderTarget9.cpp: Implements a D3D9-specific wrapper for IDirect3DSurface9
+// pointers retained by renderbuffers.
+
+#include "libGLESv2/renderer/d3d/d3d9/RenderTarget9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/main.h"
+
+namespace rx
+{
+
+// TODO: AddRef the incoming surface to take ownership instead of expecting that its ref is being given.
+RenderTarget9::RenderTarget9(Renderer *renderer, IDirect3DSurface9 *surface)
+{
+    mRenderer = Renderer9::makeRenderer9(renderer);
+    mRenderTarget = surface;
+
+    if (mRenderTarget)
+    {
+        D3DSURFACE_DESC description;
+        mRenderTarget->GetDesc(&description);
+
+        mWidth = description.Width;
+        mHeight = description.Height;
+        mDepth = 1;
+
+        const d3d9::D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(description.Format);
+        mInternalFormat = d3dFormatInfo.internalFormat;
+        mActualFormat = d3dFormatInfo.internalFormat;
+        mSamples = d3d9_gl::GetSamplesCount(description.MultiSampleType);
+    }
+}
+
+RenderTarget9::RenderTarget9(Renderer *renderer, GLsizei width, GLsizei height, GLenum internalFormat, GLsizei samples)
+{
+    mRenderer = Renderer9::makeRenderer9(renderer);
+    mRenderTarget = NULL;
+
+    const d3d9::TextureFormat &d3d9FormatInfo = d3d9::GetTextureFormatInfo(internalFormat);
+    const d3d9::D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(d3d9FormatInfo.renderFormat);
+
+    const gl::TextureCaps &textureCaps = mRenderer->getRendererTextureCaps().get(internalFormat);
+    GLuint supportedSamples = textureCaps.getNearestSamples(samples);
+
+    HRESULT result = D3DERR_INVALIDCALL;
+
+    if (width > 0 && height > 0)
+    {
+        IDirect3DDevice9 *device = mRenderer->getDevice();
+
+        bool requiresInitialization = false;
+
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+        if (formatInfo.depthBits > 0 || formatInfo.stencilBits > 0)
+        {
+            result = device->CreateDepthStencilSurface(width, height, d3d9FormatInfo.renderFormat,
+                                                       gl_d3d9::GetMultisampleType(supportedSamples),
+                                                       0, FALSE, &mRenderTarget, NULL);
+        }
+        else
+        {
+            requiresInitialization = (d3d9FormatInfo.dataInitializerFunction != NULL);
+            result = device->CreateRenderTarget(width, height, d3d9FormatInfo.renderFormat,
+                                                gl_d3d9::GetMultisampleType(supportedSamples),
+                                                0, FALSE, &mRenderTarget, NULL);
+        }
+
+        if (result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY)
+        {
+            gl::error(GL_OUT_OF_MEMORY);
+
+            return;
+        }
+
+        ASSERT(SUCCEEDED(result));
+
+        if (requiresInitialization)
+        {
+            // This format requires that the data be initialized before the render target can be used
+            // Unfortunately this requires a Get call on the d3d device but it is far better than having
+            // to mark the render target as lockable and copy data to the gpu.
+            IDirect3DSurface9 *prevRenderTarget = NULL;
+            device->GetRenderTarget(0, &prevRenderTarget);
+            device->SetRenderTarget(0, mRenderTarget);
+            device->Clear(0, NULL, D3DCLEAR_TARGET, D3DCOLOR_RGBA(0, 0, 0, 255), 0.0f, 0);
+            device->SetRenderTarget(0, prevRenderTarget);
+        }
+    }
+
+    mWidth = width;
+    mHeight = height;
+    mDepth = 1;
+    mInternalFormat = internalFormat;
+    mSamples = supportedSamples;
+    mActualFormat = d3dFormatInfo.internalFormat;
+}
+
+RenderTarget9::~RenderTarget9()
+{
+    SafeRelease(mRenderTarget);
+}
+
+RenderTarget9 *RenderTarget9::makeRenderTarget9(RenderTarget *target)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(rx::RenderTarget9*, target));
+    return static_cast<rx::RenderTarget9*>(target);
+}
+
+void RenderTarget9::invalidate(GLint x, GLint y, GLsizei width, GLsizei height)
+{
+    // Currently a no-op
+}
+
+IDirect3DSurface9 *RenderTarget9::getSurface()
+{
+    // Caller is responsible for releasing the returned surface reference.
+    // TODO: remove the AddRef to match RenderTarget11
+    if (mRenderTarget)
+    {
+        mRenderTarget->AddRef();
+    }
+
+    return mRenderTarget;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/RenderTarget9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.h
index faf8ad1c6d..68d7adb49e 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/RenderTarget9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.h
@@ -21,10 +21,13 @@ class RenderTarget9 : public RenderTarget
 {
   public:
     RenderTarget9(Renderer *renderer, IDirect3DSurface9 *surface);
-    RenderTarget9(Renderer *renderer, GLsizei width, GLsizei height, GLenum format, GLsizei samples);
+    RenderTarget9(Renderer *renderer, GLsizei width, GLsizei height, GLenum internalFormat, GLsizei samples);
     virtual ~RenderTarget9();
 
     static RenderTarget9 *makeRenderTarget9(RenderTarget *renderTarget);
+
+    virtual void invalidate(GLint x, GLint y, GLsizei width, GLsizei height);
+
     IDirect3DSurface9 *getSurface();
 
   private:
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Renderer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
index 97a10d64bf..d63f9b8582 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Renderer9.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
@@ -1,36 +1,45 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 // Renderer9.cpp: Implements a back-end specific class for the D3D9 renderer.
 
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.h"
+#include "libGLESv2/renderer/d3d/d3d9/SwapChain9.h"
+#include "libGLESv2/renderer/d3d/d3d9/TextureStorage9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Image9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Blit9.h"
+#include "libGLESv2/renderer/d3d/d3d9/RenderTarget9.h"
+#include "libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/IndexBuffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Buffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Query9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Fence9.h"
+#include "libGLESv2/renderer/d3d/d3d9/VertexArray9.h"
+#include "libGLESv2/renderer/d3d/IndexDataManager.h"
+#include "libGLESv2/renderer/d3d/ProgramD3D.h"
+#include "libGLESv2/renderer/d3d/ShaderD3D.h"
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
+#include "libGLESv2/renderer/d3d/TransformFeedbackD3D.h"
 #include "libGLESv2/main.h"
 #include "libGLESv2/Buffer.h"
 #include "libGLESv2/Texture.h"
 #include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
 #include "libGLESv2/Renderbuffer.h"
 #include "libGLESv2/ProgramBinary.h"
-#include "libGLESv2/renderer/IndexDataManager.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/renderer/d3d9/ShaderExecutable9.h"
-#include "libGLESv2/renderer/d3d9/SwapChain9.h"
-#include "libGLESv2/renderer/d3d9/TextureStorage9.h"
-#include "libGLESv2/renderer/d3d9/Image9.h"
-#include "libGLESv2/renderer/d3d9/Blit.h"
-#include "libGLESv2/renderer/d3d9/RenderTarget9.h"
-#include "libGLESv2/renderer/d3d9/VertexBuffer9.h"
-#include "libGLESv2/renderer/d3d9/IndexBuffer9.h"
-#include "libGLESv2/renderer/d3d9/BufferStorage9.h"
-#include "libGLESv2/renderer/d3d9/Query9.h"
-#include "libGLESv2/renderer/d3d9/Fence9.h"
+#include "libGLESv2/angletypes.h"
 
 #include "libEGL/Display.h"
 
-#include "third_party/trace_event/trace_event.h"
+#include "common/utilities.h"
+
+#include <sstream>
 
 // Can also be enabled by defining FORCE_REF_RAST in the project's predefined macros
 #define REF_RAST 0
@@ -43,6 +52,13 @@
 #define ANGLE_ENABLE_D3D9EX 1
 #endif // !defined(ANGLE_ENABLE_D3D9EX)
 
+#if !defined(ANGLE_COMPILE_OPTIMIZATION_LEVEL)
+#define ANGLE_COMPILE_OPTIMIZATION_LEVEL D3DCOMPILE_OPTIMIZATION_LEVEL3
+#endif
+
+const D3DFORMAT D3DFMT_INTZ = ((D3DFORMAT)(MAKEFOURCC('I','N','T','Z')));
+const D3DFORMAT D3DFMT_NULL = ((D3DFORMAT)(MAKEFOURCC('N','U','L','L')));
+
 namespace rx
 {
 static const D3DFORMAT RenderTargetFormats[] =
@@ -80,7 +96,9 @@ enum
     MAX_TEXTURE_IMAGE_UNITS_VTF_SM3 = 4
 };
 
-Renderer9::Renderer9(egl::Display *display, HDC hDc, bool softwareDevice) : Renderer(display), mDc(hDc), mSoftwareDevice(softwareDevice)
+Renderer9::Renderer9(egl::Display *display, EGLNativeDisplayType hDc, EGLint requestedDisplay)
+    : Renderer(display),
+      mDc(hDc)
 {
     mD3d9Module = NULL;
 
@@ -101,13 +119,12 @@ Renderer9::Renderer9(egl::Display *display, HDC hDc, bool softwareDevice) : Rend
 
     mDeviceLost = false;
 
-    mMaxSupportedSamples = 0;
-
     mMaskedClearSavedState = NULL;
 
     mVertexDataManager = NULL;
     mIndexDataManager = NULL;
     mLineLoopIB = NULL;
+    mCountingIB = NULL;
 
     mMaxNullColorbufferLRU = 0;
     for (int i = 0; i < NUM_NULL_COLORBUFFER_CACHE_ENTRIES; i++)
@@ -117,6 +134,10 @@ Renderer9::Renderer9(egl::Display *display, HDC hDc, bool softwareDevice) : Rend
         mNullColorbufferCache[i].height = 0;
         mNullColorbufferCache[i].buffer = NULL;
     }
+
+    mAppliedVertexShader = NULL;
+    mAppliedPixelShader = NULL;
+    mAppliedProgramSerial = 0;
 }
 
 Renderer9::~Renderer9()
@@ -130,11 +151,12 @@ Renderer9::~Renderer9()
         }
     }
 
-    deinitialize();
+    release();
 }
 
-void Renderer9::deinitialize()
+void Renderer9::release()
 {
+    releaseShaderCompiler();
     releaseDeviceResources();
 
     SafeRelease(mDevice);
@@ -142,22 +164,15 @@ void Renderer9::deinitialize()
     SafeRelease(mD3d9);
     SafeRelease(mD3d9Ex);
 
+    mCompiler.release();
+
     if (mDeviceWindow)
     {
         DestroyWindow(mDeviceWindow);
         mDeviceWindow = NULL;
     }
 
-    if (mD3d9Module)
-    {
-        mD3d9Module = NULL;
-    }
-
-    while (!mMultiSampleSupport.empty())
-    {
-        delete [] mMultiSampleSupport.begin()->second;
-        mMultiSampleSupport.erase(mMultiSampleSupport.begin());
-    }
+    mD3d9Module = NULL;
 }
 
 Renderer9 *Renderer9::makeRenderer9(Renderer *renderer)
@@ -168,21 +183,12 @@ Renderer9 *Renderer9::makeRenderer9(Renderer *renderer)
 
 EGLint Renderer9::initialize()
 {
-    if (!initializeCompiler())
+    if (!mCompiler.initialize())
     {
         return EGL_NOT_INITIALIZED;
     }
 
-    if (mSoftwareDevice)
-    {
-        TRACE_EVENT0("gpu", "GetModuleHandle_swiftshader");
-        mD3d9Module = GetModuleHandle(TEXT("swiftshader_d3d9.dll"));
-    }
-    else
-    {
-        TRACE_EVENT0("gpu", "GetModuleHandle_d3d9");
-        mD3d9Module = GetModuleHandle(TEXT("d3d9.dll"));
-    }
+    mD3d9Module = GetModuleHandle(TEXT("d3d9.dll"));
 
     if (mD3d9Module == NULL)
     {
@@ -198,14 +204,12 @@ EGLint Renderer9::initialize()
     // desktop. Direct3D9Ex is available in Windows Vista and later if suitable drivers are available.
     if (ANGLE_ENABLE_D3D9EX && Direct3DCreate9ExPtr && SUCCEEDED(Direct3DCreate9ExPtr(D3D_SDK_VERSION, &mD3d9Ex)))
     {
-        TRACE_EVENT0("gpu", "D3d9Ex_QueryInterface");
         ASSERT(mD3d9Ex);
         mD3d9Ex->QueryInterface(IID_IDirect3D9, reinterpret_cast<void**>(&mD3d9));
         ASSERT(mD3d9);
     }
     else
     {
-        TRACE_EVENT0("gpu", "Direct3DCreate9");
         mD3d9 = Direct3DCreate9(D3D_SDK_VERSION);
     }
 
@@ -224,7 +228,6 @@ EGLint Renderer9::initialize()
 
     // Give up on getting device caps after about one second.
     {
-        TRACE_EVENT0("gpu", "GetDeviceCaps");
         for (int i = 0; i < 10; ++i)
         {
             result = mD3d9->GetDeviceCaps(mAdapter, mDeviceType, &mDeviceCaps);
@@ -251,7 +254,7 @@ EGLint Renderer9::initialize()
     }
 
     // When DirectX9 is running with an older DirectX8 driver, a StretchRect from a regular texture to a render target texture is not supported.
-    // This is required by Texture2D::convertToRenderTarget.
+    // This is required by Texture2D::ensureRenderTarget.
     if ((mDeviceCaps.DevCaps2 & D3DDEVCAPS2_CAN_STRETCHRECT_FROM_TEXTURES) == 0)
     {
         ERR("Renderer does not support stretctrect from textures!\n");
@@ -259,19 +262,9 @@ EGLint Renderer9::initialize()
     }
 
     {
-        TRACE_EVENT0("gpu", "GetAdapterIdentifier");
         mD3d9->GetAdapterIdentifier(mAdapter, 0, &mAdapterIdentifier);
     }
 
-    // ATI cards on XP have problems with non-power-of-two textures.
-    mSupportsNonPower2Textures = !(mDeviceCaps.TextureCaps & D3DPTEXTURECAPS_POW2) &&
-        !(mDeviceCaps.TextureCaps & D3DPTEXTURECAPS_CUBEMAP_POW2) &&
-        !(mDeviceCaps.TextureCaps & D3DPTEXTURECAPS_NONPOW2CONDITIONAL) &&
-        !(getComparableOSVersion() < versionWindowsVista && mAdapterIdentifier.VendorId == VENDOR_ID_AMD);
-
-    // Must support a minimum of 2:1 anisotropy for max anisotropy to be considered supported, per the spec
-    mSupportsTextureFilterAnisotropy = ((mDeviceCaps.RasterCaps & D3DPRASTERCAPS_ANISOTROPY) && (mDeviceCaps.MaxAnisotropy >= 2));
-
     mMinSwapInterval = 4;
     mMaxSwapInterval = 0;
 
@@ -301,61 +294,21 @@ EGLint Renderer9::initialize()
         mMaxSwapInterval = std::max(mMaxSwapInterval, 4);
     }
 
-    int max = 0;
-    {
-        TRACE_EVENT0("gpu", "getMultiSampleSupport");
-        for (unsigned int i = 0; i < ArraySize(RenderTargetFormats); ++i)
-        {
-            bool *multisampleArray = new bool[D3DMULTISAMPLE_16_SAMPLES + 1];
-            getMultiSampleSupport(RenderTargetFormats[i], multisampleArray);
-            mMultiSampleSupport[RenderTargetFormats[i]] = multisampleArray;
-
-            for (int j = D3DMULTISAMPLE_16_SAMPLES; j >= 0; --j)
-            {
-                if (multisampleArray[j] && j != D3DMULTISAMPLE_NONMASKABLE && j > max)
-                {
-                    max = j;
-                }
-            }
-        }
-    }
-
-    {
-        TRACE_EVENT0("gpu", "getMultiSampleSupport2");
-        for (unsigned int i = 0; i < ArraySize(DepthStencilFormats); ++i)
-        {
-            if (DepthStencilFormats[i] == D3DFMT_UNKNOWN)
-                continue;
-
-            bool *multisampleArray = new bool[D3DMULTISAMPLE_16_SAMPLES + 1];
-            getMultiSampleSupport(DepthStencilFormats[i], multisampleArray);
-            mMultiSampleSupport[DepthStencilFormats[i]] = multisampleArray;
-
-            for (int j = D3DMULTISAMPLE_16_SAMPLES; j >= 0; --j)
-            {
-                if (multisampleArray[j] && j != D3DMULTISAMPLE_NONMASKABLE && j > max)
-                {
-                    max = j;
-                }
-            }
-        }
-    }
-
-    mMaxSupportedSamples = max;
-
     static const TCHAR windowName[] = TEXT("AngleHiddenWindow");
     static const TCHAR className[] = TEXT("STATIC");
 
     {
-        TRACE_EVENT0("gpu", "CreateWindowEx");
         mDeviceWindow = CreateWindowEx(WS_EX_NOACTIVATE, className, windowName, WS_DISABLED | WS_POPUP, 0, 0, 1, 1, HWND_MESSAGE, NULL, GetModuleHandle(NULL), NULL);
     }
 
     D3DPRESENT_PARAMETERS presentParameters = getDefaultPresentParameters();
     DWORD behaviorFlags = D3DCREATE_FPU_PRESERVE | D3DCREATE_NOWINDOWCHANGES;
 
+    static wchar_t *qt_d3dcreate_multihreaded_var = _wgetenv(L"QT_D3DCREATE_MULTITHREADED");
+    if (qt_d3dcreate_multihreaded_var && wcsstr(qt_d3dcreate_multihreaded_var, L"1"))
+        behaviorFlags |= D3DCREATE_MULTITHREADED;
+
     {
-        TRACE_EVENT0("gpu", "D3d9_CreateDevice");
         result = mD3d9->CreateDevice(mAdapter, mDeviceType, mDeviceWindow, behaviorFlags | D3DCREATE_HARDWARE_VERTEXPROCESSING | D3DCREATE_PUREDEVICE, &presentParameters, &mDevice);
     }
     if (result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY || result == D3DERR_DEVICELOST)
@@ -365,7 +318,6 @@ EGLint Renderer9::initialize()
 
     if (FAILED(result))
     {
-        TRACE_EVENT0("gpu", "D3d9_CreateDevice2");
         result = mD3d9->CreateDevice(mAdapter, mDeviceType, mDeviceWindow, behaviorFlags | D3DCREATE_SOFTWARE_VERTEXPROCESSING, &presentParameters, &mDevice);
 
         if (FAILED(result))
@@ -377,47 +329,15 @@ EGLint Renderer9::initialize()
 
     if (mD3d9Ex)
     {
-        TRACE_EVENT0("gpu", "mDevice_QueryInterface");
-        result = mDevice->QueryInterface(IID_IDirect3DDevice9Ex, (void**) &mDeviceEx);
+        result = mDevice->QueryInterface(IID_IDirect3DDevice9Ex, (void**)&mDeviceEx);
         ASSERT(SUCCEEDED(result));
     }
 
     {
-        TRACE_EVENT0("gpu", "ShaderCache initialize");
         mVertexShaderCache.initialize(mDevice);
         mPixelShaderCache.initialize(mDevice);
     }
 
-    // Check occlusion query support
-    IDirect3DQuery9 *occlusionQuery = NULL;
-    {
-        TRACE_EVENT0("gpu", "device_CreateQuery");
-        if (SUCCEEDED(mDevice->CreateQuery(D3DQUERYTYPE_OCCLUSION, &occlusionQuery)) && occlusionQuery)
-        {
-            occlusionQuery->Release();
-            mOcclusionQuerySupport = true;
-        }
-        else
-        {
-            mOcclusionQuerySupport = false;
-        }
-    }
-
-    // Check event query support
-    IDirect3DQuery9 *eventQuery = NULL;
-    {
-        TRACE_EVENT0("gpu", "device_CreateQuery2");
-        if (SUCCEEDED(mDevice->CreateQuery(D3DQUERYTYPE_EVENT, &eventQuery)) && eventQuery)
-        {
-            eventQuery->Release();
-            mEventQuerySupport = true;
-        }
-        else
-        {
-            mEventQuerySupport = false;
-        }
-    }
-
     D3DDISPLAYMODE currentDisplayMode;
     mD3d9->GetAdapterDisplayMode(mAdapter, &currentDisplayMode);
 
@@ -428,70 +348,6 @@ EGLint Renderer9::initialize()
                             SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format,
                                                                D3DUSAGE_QUERY_VERTEXTEXTURE, D3DRTYPE_TEXTURE, D3DFMT_R16F));
 
-    // Check depth texture support
-    // we use INTZ for depth textures in Direct3D9
-    // we also want NULL texture support to ensure the we can make depth-only FBOs
-    // see http://aras-p.info/texts/D3D9GPUHacks.html
-    mDepthTextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format,
-                                                              D3DUSAGE_DEPTHSTENCIL, D3DRTYPE_TEXTURE, D3DFMT_INTZ)) &&
-                           SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format,
-                                                              D3DUSAGE_RENDERTARGET, D3DRTYPE_SURFACE, D3DFMT_NULL));
-
-    // Check 32 bit floating point texture support
-    mFloat32FilterSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_QUERY_FILTER,
-                                                               D3DRTYPE_TEXTURE, D3DFMT_A32B32G32R32F)) &&
-                            SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_QUERY_FILTER,
-                                                               D3DRTYPE_CUBETEXTURE, D3DFMT_A32B32G32R32F));
-
-    mFloat32RenderSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_RENDERTARGET,
-                                                               D3DRTYPE_TEXTURE, D3DFMT_A32B32G32R32F)) &&
-                            SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_RENDERTARGET,
-                                                               D3DRTYPE_CUBETEXTURE, D3DFMT_A32B32G32R32F));
-
-    if (!mFloat32FilterSupport && !mFloat32RenderSupport)
-    {
-        mFloat32TextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0,
-                                                                    D3DRTYPE_TEXTURE, D3DFMT_A32B32G32R32F)) &&
-                                 SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0,
-                                                                    D3DRTYPE_CUBETEXTURE, D3DFMT_A32B32G32R32F));
-    }
-    else
-    {
-        mFloat32TextureSupport = true;
-    }
-
-    // Check 16 bit floating point texture support
-    mFloat16FilterSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_QUERY_FILTER,
-                                                               D3DRTYPE_TEXTURE, D3DFMT_A16B16G16R16F)) &&
-                            SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_QUERY_FILTER,
-                                                               D3DRTYPE_CUBETEXTURE, D3DFMT_A16B16G16R16F));
-
-    mFloat16RenderSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_RENDERTARGET,
-                                                               D3DRTYPE_TEXTURE, D3DFMT_A16B16G16R16F)) &&
-                            SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_RENDERTARGET,
-                                                               D3DRTYPE_CUBETEXTURE, D3DFMT_A16B16G16R16F));
-
-    if (!mFloat16FilterSupport && !mFloat16RenderSupport)
-    {
-        mFloat16TextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0,
-                                                                    D3DRTYPE_TEXTURE, D3DFMT_A16B16G16R16F)) &&
-                                 SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0,
-                                                                    D3DRTYPE_CUBETEXTURE, D3DFMT_A16B16G16R16F));
-    }
-    else
-    {
-        mFloat16TextureSupport = true;
-    }
-
-    // Check DXT texture support
-    mDXT1TextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0, D3DRTYPE_TEXTURE, D3DFMT_DXT1));
-    mDXT3TextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0, D3DRTYPE_TEXTURE, D3DFMT_DXT3));
-    mDXT5TextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0, D3DRTYPE_TEXTURE, D3DFMT_DXT5));
-
-    // Check luminance[alpha] texture support
-    mLuminanceTextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0, D3DRTYPE_TEXTURE, D3DFMT_L8));
-    mLuminanceAlphaTextureSupport = SUCCEEDED(mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, 0, D3DRTYPE_TEXTURE, D3DFMT_A8L8));
-
     initializeDevice();
 
     return EGL_SUCCESS;
@@ -515,12 +371,23 @@ void Renderer9::initializeDevice()
         mDevice->SetRenderState(D3DRS_POINTSIZE_MAX, 0x3F800000);   // 1.0f
     }
 
+    const gl::Caps &rendererCaps = getRendererCaps();
+
+    mForceSetVertexSamplerStates.resize(rendererCaps.maxVertexTextureImageUnits);
+    mCurVertexSamplerStates.resize(rendererCaps.maxVertexTextureImageUnits);
+
+    mForceSetPixelSamplerStates.resize(rendererCaps.maxTextureImageUnits);
+    mCurPixelSamplerStates.resize(rendererCaps.maxTextureImageUnits);
+
+    mCurVertexTextureSerials.resize(rendererCaps.maxVertexTextureImageUnits);
+    mCurPixelTextureSerials.resize(rendererCaps.maxTextureImageUnits);
+
     markAllStateDirty();
 
     mSceneStarted = false;
 
     ASSERT(!mBlit && !mVertexDataManager && !mIndexDataManager);
-    mBlit = new Blit(this);
+    mBlit = new Blit9(this);
     mVertexDataManager = new rx::VertexDataManager(this);
     mIndexDataManager = new rx::IndexDataManager(this);
 }
@@ -559,39 +426,24 @@ int Renderer9::generateConfigs(ConfigDesc **configDescList)
 
     for (unsigned int formatIndex = 0; formatIndex < numRenderFormats; formatIndex++)
     {
-        D3DFORMAT renderTargetFormat = RenderTargetFormats[formatIndex];
-
-        HRESULT result = mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_RENDERTARGET, D3DRTYPE_SURFACE, renderTargetFormat);
-
-        if (SUCCEEDED(result))
+        const d3d9::D3DFormat &renderTargetFormatInfo = d3d9::GetD3DFormatInfo(RenderTargetFormats[formatIndex]);
+        const gl::TextureCaps &renderTargetFormatCaps = getRendererTextureCaps().get(renderTargetFormatInfo.internalFormat);
+        if (renderTargetFormatCaps.renderable)
         {
             for (unsigned int depthStencilIndex = 0; depthStencilIndex < numDepthFormats; depthStencilIndex++)
             {
-                D3DFORMAT depthStencilFormat = DepthStencilFormats[depthStencilIndex];
-                HRESULT result = D3D_OK;
-
-                if(depthStencilFormat != D3DFMT_UNKNOWN)
+                const d3d9::D3DFormat &depthStencilFormatInfo = d3d9::GetD3DFormatInfo(DepthStencilFormats[depthStencilIndex]);
+                const gl::TextureCaps &depthStencilFormatCaps = getRendererTextureCaps().get(depthStencilFormatInfo.internalFormat);
+                if (depthStencilFormatCaps.renderable || DepthStencilFormats[depthStencilIndex] == D3DFMT_UNKNOWN)
                 {
-                    result = mD3d9->CheckDeviceFormat(mAdapter, mDeviceType, currentDisplayMode.Format, D3DUSAGE_DEPTHSTENCIL, D3DRTYPE_SURFACE, depthStencilFormat);
-                }
-
-                if (SUCCEEDED(result))
-                {
-                    if(depthStencilFormat != D3DFMT_UNKNOWN)
-                    {
-                        result = mD3d9->CheckDepthStencilMatch(mAdapter, mDeviceType, currentDisplayMode.Format, renderTargetFormat, depthStencilFormat);
-                    }
-
-                    if (SUCCEEDED(result))
-                    {
-                        ConfigDesc newConfig;
-                        newConfig.renderTargetFormat = d3d9_gl::ConvertBackBufferFormat(renderTargetFormat);
-                        newConfig.depthStencilFormat = d3d9_gl::ConvertDepthStencilFormat(depthStencilFormat);
-                        newConfig.multiSample = 0; // FIXME: enumerate multi-sampling
-                        newConfig.fastConfig = (currentDisplayMode.Format == renderTargetFormat);
-
-                        (*configDescList)[numConfigs++] = newConfig;
-                    }
+                    ConfigDesc newConfig;
+                    newConfig.renderTargetFormat = renderTargetFormatInfo.internalFormat;
+                    newConfig.depthStencilFormat = depthStencilFormatInfo.internalFormat;
+                    newConfig.multiSample = 0; // FIXME: enumerate multi-sampling
+                    newConfig.fastConfig = (currentDisplayMode.Format == RenderTargetFormats[formatIndex]);
+                    newConfig.es3Capable = false;
+
+                    (*configDescList)[numConfigs++] = newConfig;
                 }
             }
         }
@@ -681,6 +533,7 @@ IDirect3DQuery9* Renderer9::allocateEventQuery()
     if (mEventQueryPool.empty())
     {
         HRESULT result = mDevice->CreateQuery(D3DQUERYTYPE_EVENT, &query);
+        UNUSED_ASSERTION_VARIABLE(result);
         ASSERT(SUCCEEDED(result));
     }
     else
@@ -696,7 +549,7 @@ void Renderer9::freeEventQuery(IDirect3DQuery9* query)
 {
     if (mEventQueryPool.size() > 1000)
     {
-        query->Release();
+        SafeRelease(query);
     }
     else
     {
@@ -736,9 +589,14 @@ IndexBuffer *Renderer9::createIndexBuffer()
     return new IndexBuffer9(this);
 }
 
-BufferStorage *Renderer9::createBufferStorage()
+BufferImpl *Renderer9::createBuffer()
+{
+    return new Buffer9(this);
+}
+
+VertexArrayImpl *Renderer9::createVertexArray()
 {
-    return new BufferStorage9();
+    return new VertexArray9(this);
 }
 
 QueryImpl *Renderer9::createQuery(GLenum type)
@@ -751,10 +609,36 @@ FenceImpl *Renderer9::createFence()
     return new Fence9(this);
 }
 
-void Renderer9::setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &samplerState)
+TransformFeedbackImpl* Renderer9::createTransformFeedback()
+{
+    return new TransformFeedbackD3D();
+}
+
+bool Renderer9::supportsFastCopyBufferToTexture(GLenum internalFormat) const
+{
+    // Pixel buffer objects are not supported in D3D9, since D3D9 is ES2-only and PBOs are ES3.
+    return false;
+}
+
+bool Renderer9::fastCopyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                                        GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea)
+{
+    // Pixel buffer objects are not supported in D3D9, since D3D9 is ES2-only and PBOs are ES3.
+    UNREACHABLE();
+    return false;
+}
+
+gl::Error Renderer9::generateSwizzle(gl::Texture *texture)
 {
-    bool *forceSetSamplers = (type == gl::SAMPLER_PIXEL) ? mForceSetPixelSamplerStates : mForceSetVertexSamplerStates;
-    gl::SamplerState *appliedSamplers = (type == gl::SAMPLER_PIXEL) ? mCurPixelSamplerStates: mCurVertexSamplerStates;
+    // Swizzled textures are not available in ES2 or D3D9
+    UNREACHABLE();
+    return gl::Error(GL_INVALID_OPERATION);
+}
+
+gl::Error Renderer9::setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &samplerState)
+{
+    std::vector<bool> &forceSetSamplers = (type == gl::SAMPLER_PIXEL) ? mForceSetPixelSamplerStates : mForceSetVertexSamplerStates;
+    std::vector<gl::SamplerState> &appliedSamplers = (type == gl::SAMPLER_PIXEL) ? mCurPixelSamplerStates: mCurVertexSamplerStates;
 
     if (forceSetSamplers[index] || memcmp(&samplerState, &appliedSamplers[index], sizeof(gl::SamplerState)) != 0)
     {
@@ -769,8 +653,8 @@ void Renderer9::setSamplerState(gl::SamplerType type, int index, const gl::Sampl
         gl_d3d9::ConvertMinFilter(samplerState.minFilter, &d3dMinFilter, &d3dMipFilter, samplerState.maxAnisotropy);
         mDevice->SetSamplerState(d3dSampler, D3DSAMP_MINFILTER, d3dMinFilter);
         mDevice->SetSamplerState(d3dSampler, D3DSAMP_MIPFILTER, d3dMipFilter);
-        mDevice->SetSamplerState(d3dSampler, D3DSAMP_MAXMIPLEVEL, samplerState.lodOffset);
-        if (mSupportsTextureFilterAnisotropy)
+        mDevice->SetSamplerState(d3dSampler, D3DSAMP_MAXMIPLEVEL, samplerState.baseLevel);
+        if (getRendererExtensions().textureFilterAnisotropic)
         {
             mDevice->SetSamplerState(d3dSampler, D3DSAMP_MAXANISOTROPY, (DWORD)samplerState.maxAnisotropy);
         }
@@ -778,9 +662,11 @@ void Renderer9::setSamplerState(gl::SamplerType type, int index, const gl::Sampl
 
     forceSetSamplers[index] = false;
     appliedSamplers[index] = samplerState;
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::setTexture(gl::SamplerType type, int index, gl::Texture *texture)
+gl::Error Renderer9::setTexture(gl::SamplerType type, int index, gl::Texture *texture)
 {
     int d3dSamplerOffset = (type == gl::SAMPLER_PIXEL) ? 0 : D3DVERTEXTEXTURESAMPLER0;
     int d3dSampler = index + d3dSamplerOffset;
@@ -788,14 +674,16 @@ void Renderer9::setTexture(gl::SamplerType type, int index, gl::Texture *texture
     unsigned int serial = 0;
     bool forceSetTexture = false;
 
-    unsigned int *appliedSerials = (type == gl::SAMPLER_PIXEL) ? mCurPixelTextureSerials : mCurVertexTextureSerials;
+    std::vector<unsigned int> &appliedSerials = (type == gl::SAMPLER_PIXEL) ? mCurPixelTextureSerials : mCurVertexTextureSerials;
 
     if (texture)
     {
-        TextureStorageInterface *texStorage = texture->getNativeTexture();
+        TextureD3D* textureImpl = TextureD3D::makeTextureD3D(texture->getImplementation());
+
+        TextureStorage *texStorage = textureImpl->getNativeTexture();
         if (texStorage)
         {
-            TextureStorage9 *storage9 = TextureStorage9::makeTextureStorage9(texStorage->getStorageInstance());
+            TextureStorage9 *storage9 = TextureStorage9::makeTextureStorage9(texStorage);
             d3dTexture = storage9->getBaseTexture();
         }
         // If we get NULL back from getBaseTexture here, something went wrong
@@ -803,7 +691,8 @@ void Renderer9::setTexture(gl::SamplerType type, int index, gl::Texture *texture
         ASSERT(d3dTexture != NULL);
 
         serial = texture->getTextureSerial();
-        forceSetTexture = texture->hasDirtyImages();
+        forceSetTexture = textureImpl->hasDirtyImages();
+        textureImpl->resetDirty();
     }
 
     if (forceSetTexture || appliedSerials[index] != serial)
@@ -812,9 +701,17 @@ void Renderer9::setTexture(gl::SamplerType type, int index, gl::Texture *texture
     }
 
     appliedSerials[index] = serial;
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer9::setUniformBuffers(const gl::Buffer* /*vertexUniformBuffers*/[], const gl::Buffer* /*fragmentUniformBuffers*/[])
+{
+    // No effect in ES2/D3D9
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::setRasterizerState(const gl::RasterizerState &rasterState)
+gl::Error Renderer9::setRasterizerState(const gl::RasterizerState &rasterState)
 {
     bool rasterStateChanged = mForceSetRasterState || memcmp(&rasterState, &mCurRasterState, sizeof(gl::RasterizerState)) != 0;
 
@@ -850,12 +747,15 @@ void Renderer9::setRasterizerState(const gl::RasterizerState &rasterState)
     }
 
     mForceSetRasterState = false;
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::Color &blendColor, unsigned int sampleMask)
+gl::Error Renderer9::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::ColorF &blendColor,
+                                   unsigned int sampleMask)
 {
     bool blendStateChanged = mForceSetBlendState || memcmp(&blendState, &mCurBlendState, sizeof(gl::BlendState)) != 0;
-    bool blendColorChanged = mForceSetBlendState || memcmp(&blendColor, &mCurBlendColor, sizeof(gl::Color)) != 0;
+    bool blendColorChanged = mForceSetBlendState || memcmp(&blendColor, &mCurBlendColor, sizeof(gl::ColorF)) != 0;
     bool sampleMaskChanged = mForceSetBlendState || sampleMask != mCurSampleMask;
 
     if (blendStateChanged || blendColorChanged)
@@ -906,6 +806,9 @@ void Renderer9::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState
             FIXME("Sample alpha to coverage is unimplemented.");
         }
 
+        gl::FramebufferAttachment *attachment = framebuffer->getFirstColorbuffer();
+        GLenum internalFormat = attachment ? attachment->getInternalFormat() : GL_NONE;
+
         // Set the color mask
         bool zeroColorMaskAllowed = getAdapterVendor() != VENDOR_ID_AMD;
         // Apparently some ATI cards have a bug where a draw with a zero color
@@ -914,8 +817,11 @@ void Renderer9::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState
         // drawing is done.
         // http://code.google.com/p/angleproject/issues/detail?id=169
 
-        DWORD colorMask = gl_d3d9::ConvertColorMask(blendState.colorMaskRed, blendState.colorMaskGreen,
-                                                    blendState.colorMaskBlue, blendState.colorMaskAlpha);
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+        DWORD colorMask = gl_d3d9::ConvertColorMask(formatInfo.redBits   > 0 && blendState.colorMaskRed,
+                                                    formatInfo.greenBits > 0 && blendState.colorMaskGreen,
+                                                    formatInfo.blueBits  > 0 && blendState.colorMaskBlue,
+                                                    formatInfo.alphaBits > 0 && blendState.colorMaskAlpha);
         if (colorMask == 0 && !zeroColorMaskAllowed)
         {
             // Enable green channel, but set blending so nothing will be drawn.
@@ -947,10 +853,12 @@ void Renderer9::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState
     }
 
     mForceSetBlendState = false;
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
-                                     int stencilBackRef, bool frontFaceCCW)
+gl::Error Renderer9::setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
+                                          int stencilBackRef, bool frontFaceCCW)
 {
     bool depthStencilStateChanged = mForceSetDepthStencilState ||
                                     memcmp(&depthStencilState, &mCurDepthStencilState, sizeof(gl::DepthStencilState)) != 0;
@@ -984,13 +892,10 @@ void Renderer9::setDepthStencilState(const gl::DepthStencilState &depthStencilSt
             const D3DRENDERSTATETYPE D3DRS_CCW_STENCILREF = D3DRS_STENCILREF;
             const D3DRENDERSTATETYPE D3DRS_CCW_STENCILMASK = D3DRS_STENCILMASK;
             const D3DRENDERSTATETYPE D3DRS_CCW_STENCILWRITEMASK = D3DRS_STENCILWRITEMASK;
-            if (depthStencilState.stencilWritemask != depthStencilState.stencilBackWritemask ||
-                stencilRef != stencilBackRef ||
-                depthStencilState.stencilMask != depthStencilState.stencilBackMask)
-            {
-                ERR("Separate front/back stencil writemasks, reference values, or stencil mask values are invalid under WebGL.");
-                return gl::error(GL_INVALID_OPERATION);
-            }
+
+            ASSERT(depthStencilState.stencilWritemask == depthStencilState.stencilBackWritemask);
+            ASSERT(stencilRef == stencilBackRef);
+            ASSERT(depthStencilState.stencilMask == depthStencilState.stencilBackMask);
 
             // get the maximum size of the stencil ref
             unsigned int maxStencil = (1 << mCurStencilSize) - 1;
@@ -1042,6 +947,8 @@ void Renderer9::setDepthStencilState(const gl::DepthStencilState &depthStencilSt
     }
 
     mForceSetDepthStencilState = false;
+
+    return gl::Error(GL_NO_ERROR);
 }
 
 void Renderer9::setScissorRectangle(const gl::Rectangle &scissor, bool enabled)
@@ -1071,7 +978,7 @@ void Renderer9::setScissorRectangle(const gl::Rectangle &scissor, bool enabled)
     mForceSetScissor = false;
 }
 
-bool Renderer9::setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
+void Renderer9::setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
                             bool ignoreViewport)
 {
     gl::Rectangle actualViewport = viewport;
@@ -1095,11 +1002,6 @@ bool Renderer9::setViewport(const gl::Rectangle &viewport, float zNear, float zF
     dxViewport.MinZ = actualZNear;
     dxViewport.MaxZ = actualZFar;
 
-    if (dxViewport.Width <= 0 || dxViewport.Height <= 0)
-    {
-        return false;   // Nothing to render
-    }
-
     float depthFront = !gl::IsTriangleMode(drawMode) ? 0.0f : (frontFace == GL_CCW ? 1.0f : -1.0f);
 
     bool viewportChanged = mForceSetViewport || memcmp(&actualViewport, &mCurViewport, sizeof(gl::Rectangle)) != 0 ||
@@ -1152,7 +1054,6 @@ bool Renderer9::setViewport(const gl::Rectangle &viewport, float zNear, float zF
     }
 
     mForceSetViewport = false;
-    return true;
 }
 
 bool Renderer9::applyPrimitiveType(GLenum mode, GLsizei count)
@@ -1188,14 +1089,15 @@ bool Renderer9::applyPrimitiveType(GLenum mode, GLsizei count)
         mPrimitiveCount = count - 2;
         break;
       default:
-        return gl::error(GL_INVALID_ENUM, false);
+        UNREACHABLE();
+        return false;
     }
 
     return mPrimitiveCount > 0;
 }
 
 
-gl::Renderbuffer *Renderer9::getNullColorbuffer(gl::Renderbuffer *depthbuffer)
+gl::FramebufferAttachment *Renderer9::getNullColorbuffer(gl::FramebufferAttachment *depthbuffer)
 {
     if (!depthbuffer)
     {
@@ -1218,7 +1120,8 @@ gl::Renderbuffer *Renderer9::getNullColorbuffer(gl::Renderbuffer *depthbuffer)
         }
     }
 
-    gl::Renderbuffer *nullbuffer = new gl::Renderbuffer(this, 0, new gl::Colorbuffer(this, width, height, GL_NONE, 0));
+    gl::Renderbuffer *nullRenderbuffer = new gl::Renderbuffer(0, new gl::Colorbuffer(this, width, height, GL_NONE, 0));
+    gl::RenderbufferAttachment *nullbuffer = new gl::RenderbufferAttachment(GL_NONE, nullRenderbuffer);
 
     // add nullbuffer to the cache
     NullColorbufferCacheEntry *oldest = &mNullColorbufferCache[0];
@@ -1239,75 +1142,56 @@ gl::Renderbuffer *Renderer9::getNullColorbuffer(gl::Renderbuffer *depthbuffer)
     return nullbuffer;
 }
 
-bool Renderer9::applyRenderTarget(gl::Framebuffer *framebuffer)
+gl::Error Renderer9::applyRenderTarget(gl::Framebuffer *framebuffer)
 {
     // if there is no color attachment we must synthesize a NULL colorattachment
     // to keep the D3D runtime happy.  This should only be possible if depth texturing.
-    gl::Renderbuffer *renderbufferObject = NULL;
-    if (framebuffer->getColorbufferType(0) != GL_NONE)
-    {
-        renderbufferObject = framebuffer->getColorbuffer(0);
-    }
-    else
+    gl::FramebufferAttachment *attachment = framebuffer->getColorbuffer(0);
+    if (!attachment)
     {
-        renderbufferObject = getNullColorbuffer(framebuffer->getDepthbuffer());
+        attachment = getNullColorbuffer(framebuffer->getDepthbuffer());
     }
-    if (!renderbufferObject)
+    if (!attachment)
     {
-        ERR("unable to locate renderbuffer for FBO.");
-        return false;
+        return gl::Error(GL_OUT_OF_MEMORY, "Unable to locate renderbuffer for FBO.");
     }
 
     bool renderTargetChanged = false;
-    unsigned int renderTargetSerial = renderbufferObject->getSerial();
+    unsigned int renderTargetSerial = GetAttachmentSerial(attachment);
     if (renderTargetSerial != mAppliedRenderTargetSerial)
     {
         // Apply the render target on the device
         IDirect3DSurface9 *renderTargetSurface = NULL;
 
-        RenderTarget *renderTarget = renderbufferObject->getRenderTarget();
+        RenderTarget9 *renderTarget = d3d9::GetAttachmentRenderTarget(attachment);
         if (renderTarget)
         {
-            renderTargetSurface = RenderTarget9::makeRenderTarget9(renderTarget)->getSurface();
+            renderTargetSurface = renderTarget->getSurface();
         }
 
         if (!renderTargetSurface)
         {
-            ERR("render target pointer unexpectedly null.");
-            return false;   // Context must be lost
+            return gl::Error(GL_OUT_OF_MEMORY, "Internal render target pointer unexpectedly null.");
         }
 
         mDevice->SetRenderTarget(0, renderTargetSurface);
-        renderTargetSurface->Release();
+        SafeRelease(renderTargetSurface);
 
         mAppliedRenderTargetSerial = renderTargetSerial;
         renderTargetChanged = true;
     }
 
-    gl::Renderbuffer *depthStencil = NULL;
+    gl::FramebufferAttachment *depthStencil = framebuffer->getDepthbuffer();
     unsigned int depthbufferSerial = 0;
     unsigned int stencilbufferSerial = 0;
-    if (framebuffer->getDepthbufferType() != GL_NONE)
+    if (depthStencil)
     {
-        depthStencil = framebuffer->getDepthbuffer();
-        if (!depthStencil)
-        {
-            ERR("Depth stencil pointer unexpectedly null.");
-            return false;
-        }
-
-        depthbufferSerial = depthStencil->getSerial();
+        depthbufferSerial = GetAttachmentSerial(depthStencil);
     }
-    else if (framebuffer->getStencilbufferType() != GL_NONE)
+    else if (framebuffer->getStencilbuffer())
     {
         depthStencil = framebuffer->getStencilbuffer();
-        if (!depthStencil)
-        {
-            ERR("Depth stencil pointer unexpectedly null.");
-            return false;
-        }
-
-        stencilbufferSerial = depthStencil->getSerial();
+        stencilbufferSerial = GetAttachmentSerial(depthStencil);
     }
 
     if (depthbufferSerial != mAppliedDepthbufferSerial ||
@@ -1321,21 +1205,20 @@ bool Renderer9::applyRenderTarget(gl::Framebuffer *framebuffer)
         if (depthStencil)
         {
             IDirect3DSurface9 *depthStencilSurface = NULL;
-            RenderTarget *depthStencilRenderTarget = depthStencil->getDepthStencil();
+            rx::RenderTarget9 *depthStencilRenderTarget = d3d9::GetAttachmentRenderTarget(depthStencil);
 
             if (depthStencilRenderTarget)
             {
-                depthStencilSurface = RenderTarget9::makeRenderTarget9(depthStencilRenderTarget)->getSurface();
+                depthStencilSurface = depthStencilRenderTarget->getSurface();
             }
 
             if (!depthStencilSurface)
             {
-                ERR("depth stencil pointer unexpectedly null.");
-                return false;   // Context must be lost
+                return gl::Error(GL_OUT_OF_MEMORY, "Internal depth stencil pointer unexpectedly null.");
             }
 
             mDevice->SetDepthStencilSurface(depthStencilSurface);
-            depthStencilSurface->Release();
+            SafeRelease(depthStencilSurface);
 
             depthSize = depthStencil->getDepthSize();
             stencilSize = depthStencil->getStencilSize();
@@ -1366,160 +1249,172 @@ bool Renderer9::applyRenderTarget(gl::Framebuffer *framebuffer)
     {
         mForceSetScissor = true;
         mForceSetViewport = true;
+        mForceSetBlendState = true;
 
-        mRenderTargetDesc.width = renderbufferObject->getWidth();
-        mRenderTargetDesc.height = renderbufferObject->getHeight();
-        mRenderTargetDesc.format = renderbufferObject->getActualFormat();
+        mRenderTargetDesc.width = attachment->getWidth();
+        mRenderTargetDesc.height = attachment->getHeight();
+        mRenderTargetDesc.format = attachment->getActualFormat();
         mRenderTargetDescInitialized = true;
     }
 
-    return true;
+    return gl::Error(GL_NO_ERROR);
 }
 
-GLenum Renderer9::applyVertexBuffer(gl::ProgramBinary *programBinary, gl::VertexAttribute vertexAttributes[], GLint first, GLsizei count, GLsizei instances)
+gl::Error Renderer9::applyVertexBuffer(gl::ProgramBinary *programBinary, const gl::VertexAttribute vertexAttributes[], const gl::VertexAttribCurrentValueData currentValues[],
+                                       GLint first, GLsizei count, GLsizei instances)
 {
     TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS];
-    GLenum err = mVertexDataManager->prepareVertexData(vertexAttributes, programBinary, first, count, attributes, instances);
-    if (err != GL_NO_ERROR)
+    gl::Error error = mVertexDataManager->prepareVertexData(vertexAttributes, currentValues, programBinary, first, count, attributes, instances);
+    if (error.isError())
     {
-        return err;
+        return error;
     }
-    
+
     return mVertexDeclarationCache.applyDeclaration(mDevice, attributes, programBinary, instances, &mRepeatDraw);
 }
 
 // Applies the indices and element array bindings to the Direct3D 9 device
-GLenum Renderer9::applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo)
+gl::Error Renderer9::applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo)
 {
-    GLenum err = mIndexDataManager->prepareIndexData(type, count, elementArrayBuffer, indices, indexInfo);
-
-    if (err == GL_NO_ERROR)
+    gl::Error error = mIndexDataManager->prepareIndexData(type, count, elementArrayBuffer, indices, indexInfo);
+    if (error.isError())
     {
-        // Directly binding the storage buffer is not supported for d3d9
-        ASSERT(indexInfo->storage == NULL);
+        return error;
+    }
 
-        if (indexInfo->serial != mAppliedIBSerial)
-        {
-            IndexBuffer9* indexBuffer = IndexBuffer9::makeIndexBuffer9(indexInfo->indexBuffer);
+    // Directly binding the storage buffer is not supported for d3d9
+    ASSERT(indexInfo->storage == NULL);
 
-            mDevice->SetIndices(indexBuffer->getBuffer());
-            mAppliedIBSerial = indexInfo->serial;
-        }
+    if (indexInfo->serial != mAppliedIBSerial)
+    {
+        IndexBuffer9* indexBuffer = IndexBuffer9::makeIndexBuffer9(indexInfo->indexBuffer);
+
+        mDevice->SetIndices(indexBuffer->getBuffer());
+        mAppliedIBSerial = indexInfo->serial;
     }
 
-    return err;
+    return gl::Error(GL_NO_ERROR);
+}
+
+void Renderer9::applyTransformFeedbackBuffers(gl::Buffer *transformFeedbackBuffers[], GLintptr offsets[])
+{
+    UNREACHABLE();
 }
 
-void Renderer9::drawArrays(GLenum mode, GLsizei count, GLsizei instances)
+gl::Error Renderer9::drawArrays(GLenum mode, GLsizei count, GLsizei instances, bool transformFeedbackActive)
 {
+    ASSERT(!transformFeedbackActive);
+
     startScene();
-        
+
     if (mode == GL_LINE_LOOP)
     {
-        drawLineLoop(count, GL_NONE, NULL, 0, NULL);
+        return drawLineLoop(count, GL_NONE, NULL, 0, NULL);
     }
     else if (instances > 0)
     {
-        StaticIndexBufferInterface *countingIB = mIndexDataManager->getCountingIndices(count);
-        if (countingIB)
+        StaticIndexBufferInterface *countingIB = NULL;
+        gl::Error error = getCountingIB(count, &countingIB);
+        if (error.isError())
         {
-            if (mAppliedIBSerial != countingIB->getSerial())
-            {
-                IndexBuffer9 *indexBuffer = IndexBuffer9::makeIndexBuffer9(countingIB->getIndexBuffer());
+            return error;
+        }
 
-                mDevice->SetIndices(indexBuffer->getBuffer());
-                mAppliedIBSerial = countingIB->getSerial();
-            }
+        if (mAppliedIBSerial != countingIB->getSerial())
+        {
+            IndexBuffer9 *indexBuffer = IndexBuffer9::makeIndexBuffer9(countingIB->getIndexBuffer());
 
-            for (int i = 0; i < mRepeatDraw; i++)
-            {
-                mDevice->DrawIndexedPrimitive(mPrimitiveType, 0, 0, count, 0, mPrimitiveCount);
-            }
+            mDevice->SetIndices(indexBuffer->getBuffer());
+            mAppliedIBSerial = countingIB->getSerial();
         }
-        else
+
+        for (int i = 0; i < mRepeatDraw; i++)
         {
-            ERR("Could not create a counting index buffer for glDrawArraysInstanced.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            mDevice->DrawIndexedPrimitive(mPrimitiveType, 0, 0, count, 0, mPrimitiveCount);
         }
+
+        return gl::Error(GL_NO_ERROR);
     }
     else   // Regular case
     {
         mDevice->DrawPrimitive(mPrimitiveType, 0, mPrimitiveCount);
+        return gl::Error(GL_NO_ERROR);
     }
 }
 
-void Renderer9::drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei /*instances*/)
+gl::Error Renderer9::drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices,
+                                  gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei /*instances*/)
 {
     startScene();
 
+    int minIndex = static_cast<int>(indexInfo.indexRange.start);
+
     if (mode == GL_POINTS)
     {
-        drawIndexedPoints(count, type, indices, indexInfo.minIndex, elementArrayBuffer);
+        return drawIndexedPoints(count, type, indices, minIndex, elementArrayBuffer);
     }
     else if (mode == GL_LINE_LOOP)
     {
-        drawLineLoop(count, type, indices, indexInfo.minIndex, elementArrayBuffer);
+        return drawLineLoop(count, type, indices, minIndex, elementArrayBuffer);
     }
     else
     {
         for (int i = 0; i < mRepeatDraw; i++)
         {
-            GLsizei vertexCount = indexInfo.maxIndex - indexInfo.minIndex + 1;
-            mDevice->DrawIndexedPrimitive(mPrimitiveType, -(INT)indexInfo.minIndex, indexInfo.minIndex, vertexCount, indexInfo.startIndex, mPrimitiveCount);
+            GLsizei vertexCount = static_cast<int>(indexInfo.indexRange.length()) + 1;
+            mDevice->DrawIndexedPrimitive(mPrimitiveType, -minIndex, minIndex, vertexCount, indexInfo.startIndex, mPrimitiveCount);
         }
+        return gl::Error(GL_NO_ERROR);
     }
 }
 
-void Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
+gl::Error Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
 {
     // Get the raw indices for an indexed draw
     if (type != GL_NONE && elementArrayBuffer)
     {
         gl::Buffer *indexBuffer = elementArrayBuffer;
-        BufferStorage *storage = indexBuffer->getStorage();
+        BufferImpl *storage = indexBuffer->getImplementation();
         intptr_t offset = reinterpret_cast<intptr_t>(indices);
         indices = static_cast<const GLubyte*>(storage->getData()) + offset;
     }
 
     unsigned int startIndex = 0;
 
-    if (get32BitIndexSupport())
+    if (getRendererExtensions().elementIndexUint)
     {
         if (!mLineLoopIB)
         {
             mLineLoopIB = new StreamingIndexBufferInterface(this);
-            if (!mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT))
+            gl::Error error = mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT);
+            if (error.isError())
             {
-                delete mLineLoopIB;
-                mLineLoopIB = NULL;
-
-                ERR("Could not create a 32-bit looping index buffer for GL_LINE_LOOP.");
-                return gl::error(GL_OUT_OF_MEMORY);
+                SafeDelete(mLineLoopIB);
+                return error;
             }
         }
 
+        // Checked by Renderer9::applyPrimitiveType
+        ASSERT(count >= 0);
+
         if (static_cast<unsigned int>(count) + 1 > (std::numeric_limits<unsigned int>::max() / sizeof(unsigned int)))
         {
-            ERR("Could not create a 32-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to create a 32-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
         }
 
-        // Checked by Renderer9::applyPrimitiveType
-        ASSERT(count >= 0);
-
-        const unsigned int spaceNeeded = (static_cast<unsigned int>(count) + 1) * sizeof(unsigned int);
-        if (!mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT))
+        const unsigned int spaceNeeded = (static_cast<unsigned int>(count)+1) * sizeof(unsigned int);
+        gl::Error error = mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT);
+        if (error.isError())
         {
-            ERR("Could not reserve enough space in looping index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return error;
         }
 
         void* mappedMemory = NULL;
         unsigned int offset = 0;
-        if (!mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset))
+        error = mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset);
+        if (error.isError())
         {
-            ERR("Could not map index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return error;
         }
 
         startIndex = static_cast<unsigned int>(offset) / 4;
@@ -1558,10 +1453,10 @@ void Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
           default: UNREACHABLE();
         }
 
-        if (!mLineLoopIB->unmapBuffer())
+        error = mLineLoopIB->unmapBuffer();
+        if (error.isError())
         {
-            ERR("Could not unmap index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return error;
         }
     }
     else
@@ -1569,13 +1464,11 @@ void Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
         if (!mLineLoopIB)
         {
             mLineLoopIB = new StreamingIndexBufferInterface(this);
-            if (!mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_SHORT))
+            gl::Error error = mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_SHORT);
+            if (error.isError())
             {
-                delete mLineLoopIB;
-                mLineLoopIB = NULL;
-
-                ERR("Could not create a 16-bit looping index buffer for GL_LINE_LOOP.");
-                return gl::error(GL_OUT_OF_MEMORY);
+                SafeDelete(mLineLoopIB);
+                return error;
             }
         }
 
@@ -1584,23 +1477,22 @@ void Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
 
         if (static_cast<unsigned int>(count) + 1 > (std::numeric_limits<unsigned short>::max() / sizeof(unsigned short)))
         {
-            ERR("Could not create a 16-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to create a 16-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
         }
 
         const unsigned int spaceNeeded = (static_cast<unsigned int>(count) + 1) * sizeof(unsigned short);
-        if (!mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_SHORT))
+        gl::Error error = mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_SHORT);
+        if (error.isError())
         {
-            ERR("Could not reserve enough space in looping index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return error;
         }
 
         void* mappedMemory = NULL;
         unsigned int offset;
-        if (mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset))
+        error = mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset);
+        if (error.isError())
         {
-            ERR("Could not map index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return error;
         }
 
         startIndex = static_cast<unsigned int>(offset) / 2;
@@ -1639,10 +1531,10 @@ void Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
           default: UNREACHABLE();
         }
 
-        if (!mLineLoopIB->unmapBuffer())
+        error = mLineLoopIB->unmapBuffer();
+        if (error.isError())
         {
-            ERR("Could not unmap index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
+            return error;
         }
     }
 
@@ -1655,67 +1547,162 @@ void Renderer9::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
     }
 
     mDevice->DrawIndexedPrimitive(D3DPT_LINESTRIP, -minIndex, minIndex, count, startIndex, count);
+
+    return gl::Error(GL_NO_ERROR);
 }
 
 template <typename T>
-static void drawPoints(IDirect3DDevice9* device, GLsizei count, const GLvoid *indices, int minIndex)
+static gl::Error drawPoints(IDirect3DDevice9* device, GLsizei count, const GLvoid *indices, int minIndex)
 {
     for (int i = 0; i < count; i++)
     {
         unsigned int indexValue = static_cast<unsigned int>(static_cast<const T*>(indices)[i]) - minIndex;
         device->DrawPrimitive(D3DPT_POINTLIST, indexValue, 1);
     }
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::drawIndexedPoints(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
+gl::Error Renderer9::drawIndexedPoints(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
 {
     // Drawing index point lists is unsupported in d3d9, fall back to a regular DrawPrimitive call
     // for each individual point. This call is not expected to happen often.
 
     if (elementArrayBuffer)
     {
-        BufferStorage *storage = elementArrayBuffer->getStorage();
+        BufferImpl *storage = elementArrayBuffer->getImplementation();
         intptr_t offset = reinterpret_cast<intptr_t>(indices);
         indices = static_cast<const GLubyte*>(storage->getData()) + offset;
     }
 
     switch (type)
     {
-        case GL_UNSIGNED_BYTE:  drawPoints<GLubyte>(mDevice, count, indices, minIndex);  break;
-        case GL_UNSIGNED_SHORT: drawPoints<GLushort>(mDevice, count, indices, minIndex); break;
-        case GL_UNSIGNED_INT:   drawPoints<GLuint>(mDevice, count, indices, minIndex);   break;
-        default: UNREACHABLE();
+        case GL_UNSIGNED_BYTE:  return drawPoints<GLubyte>(mDevice, count, indices, minIndex);
+        case GL_UNSIGNED_SHORT: return drawPoints<GLushort>(mDevice, count, indices, minIndex);
+        case GL_UNSIGNED_INT:   return drawPoints<GLuint>(mDevice, count, indices, minIndex);
+        default: UNREACHABLE(); return gl::Error(GL_INVALID_OPERATION);
     }
 }
 
-void Renderer9::applyShaders(gl::ProgramBinary *programBinary)
+gl::Error Renderer9::getCountingIB(size_t count, StaticIndexBufferInterface **outIB)
 {
-    unsigned int programBinarySerial = programBinary->getSerial();
-    if (programBinarySerial != mAppliedProgramBinarySerial)
+    // Update the counting index buffer if it is not large enough or has not been created yet.
+    if (count <= 65536)   // 16-bit indices
     {
-        ShaderExecutable *vertexExe = programBinary->getVertexExecutable();
-        ShaderExecutable *pixelExe = programBinary->getPixelExecutable();
+        const unsigned int spaceNeeded = count * sizeof(unsigned short);
 
-        IDirect3DVertexShader9 *vertexShader = NULL;
-        if (vertexExe) vertexShader = ShaderExecutable9::makeShaderExecutable9(vertexExe)->getVertexShader();
+        if (!mCountingIB || mCountingIB->getBufferSize() < spaceNeeded)
+        {
+            SafeDelete(mCountingIB);
+            mCountingIB = new StaticIndexBufferInterface(this);
+            mCountingIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_SHORT);
 
-        IDirect3DPixelShader9 *pixelShader = NULL;
-        if (pixelExe) pixelShader = ShaderExecutable9::makeShaderExecutable9(pixelExe)->getPixelShader();
+            void *mappedMemory = NULL;
+            gl::Error error = mCountingIB->mapBuffer(spaceNeeded, &mappedMemory, NULL);
+            if (error.isError())
+            {
+                return error;
+            }
 
-        mDevice->SetPixelShader(pixelShader);
+            unsigned short *data = reinterpret_cast<unsigned short*>(mappedMemory);
+            for (size_t i = 0; i < count; i++)
+            {
+                data[i] = i;
+            }
+
+            error = mCountingIB->unmapBuffer();
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+    }
+    else if (getRendererExtensions().elementIndexUint)
+    {
+        const unsigned int spaceNeeded = count * sizeof(unsigned int);
+
+        if (!mCountingIB || mCountingIB->getBufferSize() < spaceNeeded)
+        {
+            SafeDelete(mCountingIB);
+            mCountingIB = new StaticIndexBufferInterface(this);
+            mCountingIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT);
+
+            void *mappedMemory = NULL;
+            gl::Error error = mCountingIB->mapBuffer(spaceNeeded, &mappedMemory, NULL);
+            if (error.isError())
+            {
+                return error;
+            }
+
+            unsigned int *data = reinterpret_cast<unsigned int*>(mappedMemory);
+            for (size_t i = 0; i < count; i++)
+            {
+                data[i] = i;
+            }
+
+            error = mCountingIB->unmapBuffer();
+            if (error.isError())
+            {
+                return error;
+            }
+        }
+    }
+    else
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Could not create a counting index buffer for glDrawArraysInstanced.");
+    }
+
+    *outIB = mCountingIB;
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error Renderer9::applyShaders(gl::ProgramBinary *programBinary, const gl::VertexFormat inputLayout[], const gl::Framebuffer *framebuffer,
+                                  bool rasterizerDiscard, bool transformFeedbackActive)
+{
+    ASSERT(!transformFeedbackActive);
+    ASSERT(!rasterizerDiscard);
+
+    ShaderExecutable *vertexExe = programBinary->getVertexExecutableForInputLayout(inputLayout);
+    ShaderExecutable *pixelExe = programBinary->getPixelExecutableForFramebuffer(framebuffer);
+
+    IDirect3DVertexShader9 *vertexShader = (vertexExe ? ShaderExecutable9::makeShaderExecutable9(vertexExe)->getVertexShader() : NULL);
+    IDirect3DPixelShader9 *pixelShader = (pixelExe ? ShaderExecutable9::makeShaderExecutable9(pixelExe)->getPixelShader() : NULL);
+
+    if (vertexShader != mAppliedVertexShader)
+    {
         mDevice->SetVertexShader(vertexShader);
+        mAppliedVertexShader = vertexShader;
+    }
+
+    if (pixelShader != mAppliedPixelShader)
+    {
+        mDevice->SetPixelShader(pixelShader);
+        mAppliedPixelShader = pixelShader;
+    }
+
+    // D3D9 has a quirk where creating multiple shaders with the same content
+    // can return the same shader pointer. Because GL programs store different data
+    // per-program, checking the program serial guarantees we upload fresh
+    // uniform data even if our shader pointers are the same.
+    // https://code.google.com/p/angleproject/issues/detail?id=661
+    unsigned int programSerial = programBinary->getSerial();
+    if (programSerial != mAppliedProgramSerial)
+    {
         programBinary->dirtyAllUniforms();
         mDxUniformsDirty = true;
-
-        mAppliedProgramBinarySerial = programBinarySerial;
+        mAppliedProgramSerial = programSerial;
     }
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray *uniformArray)
+gl::Error Renderer9::applyUniforms(const gl::ProgramBinary &programBinary)
 {
-    for (std::vector<gl::Uniform*>::const_iterator ub = uniformArray->begin(), ue = uniformArray->end(); ub != ue; ++ub)
+    const std::vector<gl::LinkedUniform*> &uniformArray = programBinary.getUniforms();
+
+    for (size_t uniformIndex = 0; uniformIndex < uniformArray.size(); uniformIndex++)
     {
-        gl::Uniform *targetUniform = *ub;
+        gl::LinkedUniform *targetUniform = uniformArray[uniformIndex];
 
         if (targetUniform->dirty)
         {
@@ -1751,8 +1738,6 @@ void Renderer9::applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray
               default:
                 UNREACHABLE();
             }
-
-            targetUniform->dirty = false;
         }
     }
 
@@ -1763,22 +1748,24 @@ void Renderer9::applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray
         mDevice->SetPixelShaderConstantF(0, (float*)&mPixelConstants, sizeof(dx_PixelConstants) / sizeof(float[4]));
         mDxUniformsDirty = false;
     }
+
+    return gl::Error(GL_NO_ERROR);
 }
 
-void Renderer9::applyUniformnfv(gl::Uniform *targetUniform, const GLfloat *v)
+void Renderer9::applyUniformnfv(gl::LinkedUniform *targetUniform, const GLfloat *v)
 {
-    if (targetUniform->psRegisterIndex >= 0)
+    if (targetUniform->isReferencedByFragmentShader())
     {
         mDevice->SetPixelShaderConstantF(targetUniform->psRegisterIndex, v, targetUniform->registerCount);
     }
 
-    if (targetUniform->vsRegisterIndex >= 0)
+    if (targetUniform->isReferencedByVertexShader())
     {
         mDevice->SetVertexShaderConstantF(targetUniform->vsRegisterIndex, v, targetUniform->registerCount);
     }
 }
 
-void Renderer9::applyUniformniv(gl::Uniform *targetUniform, const GLint *v)
+void Renderer9::applyUniformniv(gl::LinkedUniform *targetUniform, const GLint *v)
 {
     ASSERT(targetUniform->registerCount <= MAX_VERTEX_CONSTANT_VECTORS_D3D9);
     GLfloat vector[MAX_VERTEX_CONSTANT_VECTORS_D3D9][4];
@@ -1794,7 +1781,7 @@ void Renderer9::applyUniformniv(gl::Uniform *targetUniform, const GLint *v)
     applyUniformnfv(targetUniform, (GLfloat*)vector);
 }
 
-void Renderer9::applyUniformnbv(gl::Uniform *targetUniform, const GLint *v)
+void Renderer9::applyUniformnbv(gl::LinkedUniform *targetUniform, const GLint *v)
 {
     ASSERT(targetUniform->registerCount <= MAX_VERTEX_CONSTANT_VECTORS_D3D9);
     GLfloat vector[MAX_VERTEX_CONSTANT_VECTORS_D3D9][4];
@@ -1810,29 +1797,60 @@ void Renderer9::applyUniformnbv(gl::Uniform *targetUniform, const GLint *v)
     applyUniformnfv(targetUniform, (GLfloat*)vector);
 }
 
-void Renderer9::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer)
+gl::Error Renderer9::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer)
 {
-    D3DCOLOR color = D3DCOLOR_ARGB(gl::unorm<8>(clearParams.colorClearValue.alpha),
-                                   gl::unorm<8>(clearParams.colorClearValue.red),
-                                   gl::unorm<8>(clearParams.colorClearValue.green),
-                                   gl::unorm<8>(clearParams.colorClearValue.blue));
+    if (clearParams.colorClearType != GL_FLOAT)
+    {
+        // Clearing buffers with non-float values is not supported by Renderer9 and ES 2.0
+        UNREACHABLE();
+        return gl::Error(GL_INVALID_OPERATION);
+    }
+
+    bool clearColor = clearParams.clearColor[0];
+    for (unsigned int i = 0; i < ArraySize(clearParams.clearColor); i++)
+    {
+        if (clearParams.clearColor[i] != clearColor)
+        {
+            // Clearing individual buffers other than buffer zero is not supported by Renderer9 and ES 2.0
+            UNREACHABLE();
+            return gl::Error(GL_INVALID_OPERATION);
+        }
+    }
+
     float depth = gl::clamp01(clearParams.depthClearValue);
-    int stencil = clearParams.stencilClearValue & 0x000000FF;
+    DWORD stencil = clearParams.stencilClearValue & 0x000000FF;
 
     unsigned int stencilUnmasked = 0x0;
-    if ((clearParams.mask & GL_STENCIL_BUFFER_BIT) && frameBuffer->hasStencil())
+    if (clearParams.clearStencil && frameBuffer->hasStencil())
     {
-        unsigned int stencilSize = gl::GetStencilSize(frameBuffer->getStencilbuffer()->getActualFormat());
+        unsigned int stencilSize = gl::GetInternalFormatInfo((frameBuffer->getStencilbuffer()->getActualFormat())).stencilBits;
         stencilUnmasked = (0x1 << stencilSize) - 1;
     }
 
-    bool alphaUnmasked = (gl::GetAlphaSize(mRenderTargetDesc.format) == 0) || clearParams.colorMaskAlpha;
-
-    const bool needMaskedStencilClear = (clearParams.mask & GL_STENCIL_BUFFER_BIT) &&
+    const bool needMaskedStencilClear = clearParams.clearStencil &&
                                         (clearParams.stencilWriteMask & stencilUnmasked) != stencilUnmasked;
-    const bool needMaskedColorClear = (clearParams.mask & GL_COLOR_BUFFER_BIT) &&
-                                      !(clearParams.colorMaskRed && clearParams.colorMaskGreen &&
-                                        clearParams.colorMaskBlue && alphaUnmasked);
+
+    bool needMaskedColorClear = false;
+    D3DCOLOR color = D3DCOLOR_ARGB(255, 0, 0, 0);
+    if (clearColor)
+    {
+        const gl::FramebufferAttachment *attachment = frameBuffer->getFirstColorbuffer();
+        const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(attachment->getInternalFormat());
+        const gl::InternalFormat &actualFormatInfo = gl::GetInternalFormatInfo(attachment->getActualFormat());
+
+        color = D3DCOLOR_ARGB(gl::unorm<8>((formatInfo.alphaBits == 0 && actualFormatInfo.alphaBits > 0) ? 1.0f : clearParams.colorFClearValue.alpha),
+                              gl::unorm<8>((formatInfo.redBits   == 0 && actualFormatInfo.redBits   > 0) ? 0.0f : clearParams.colorFClearValue.red),
+                              gl::unorm<8>((formatInfo.greenBits == 0 && actualFormatInfo.greenBits > 0) ? 0.0f : clearParams.colorFClearValue.green),
+                              gl::unorm<8>((formatInfo.blueBits  == 0 && actualFormatInfo.blueBits  > 0) ? 0.0f : clearParams.colorFClearValue.blue));
+
+        if ((formatInfo.redBits   > 0 && !clearParams.colorMaskRed) ||
+            (formatInfo.greenBits > 0 && !clearParams.colorMaskGreen) ||
+            (formatInfo.blueBits  > 0 && !clearParams.colorMaskBlue) ||
+            (formatInfo.alphaBits > 0 && !clearParams.colorMaskAlpha))
+        {
+            needMaskedColorClear = true;
+        }
+    }
 
     if (needMaskedColorClear || needMaskedStencilClear)
     {
@@ -1893,7 +1911,7 @@ void Renderer9::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *f
         mDevice->SetRenderState(D3DRS_ALPHABLENDENABLE, FALSE);
         mDevice->SetRenderState(D3DRS_CLIPPLANEENABLE, 0);
 
-        if (clearParams.mask & GL_COLOR_BUFFER_BIT)
+        if (clearColor)
         {
             mDevice->SetRenderState(D3DRS_COLORWRITEENABLE,
                                     gl_d3d9::ConvertColorMask(clearParams.colorMaskRed,
@@ -1906,7 +1924,7 @@ void Renderer9::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *f
             mDevice->SetRenderState(D3DRS_COLORWRITEENABLE, 0);
         }
 
-        if (stencilUnmasked != 0x0 && (clearParams.mask & GL_STENCIL_BUFFER_BIT))
+        if (stencilUnmasked != 0x0 && clearParams.clearStencil)
         {
             mDevice->SetRenderState(D3DRS_STENCILENABLE, TRUE);
             mDevice->SetRenderState(D3DRS_TWOSIDEDSTENCILMODE, FALSE);
@@ -1962,7 +1980,7 @@ void Renderer9::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *f
         startScene();
         mDevice->DrawPrimitiveUP(D3DPT_TRIANGLESTRIP, 2, quad, sizeof(float[4]));
 
-        if (clearParams.mask & GL_DEPTH_BUFFER_BIT)
+        if (clearParams.clearDepth)
         {
             mDevice->SetRenderState(D3DRS_ZENABLE, TRUE);
             mDevice->SetRenderState(D3DRS_ZWRITEENABLE, TRUE);
@@ -1974,24 +1992,26 @@ void Renderer9::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *f
             mMaskedClearSavedState->Apply();
         }
     }
-    else if (clearParams.mask)
+    else if (clearColor || clearParams.clearDepth || clearParams.clearStencil)
     {
         DWORD dxClearFlags = 0;
-        if (clearParams.mask & GL_COLOR_BUFFER_BIT)
+        if (clearColor)
         {
             dxClearFlags |= D3DCLEAR_TARGET;
         }
-        if (clearParams.mask & GL_DEPTH_BUFFER_BIT)
+        if (clearParams.clearDepth)
         {
             dxClearFlags |= D3DCLEAR_ZBUFFER;
         }
-        if (clearParams.mask & GL_STENCIL_BUFFER_BIT)
+        if (clearParams.clearStencil)
         {
             dxClearFlags |= D3DCLEAR_STENCIL;
         }
 
         mDevice->Clear(0, NULL, dxClearFlags, color, depth, stencil);
     }
+
+    return gl::Error(GL_NO_ERROR);
 }
 
 void Renderer9::markAllStateDirty()
@@ -2008,19 +2028,24 @@ void Renderer9::markAllStateDirty()
     mForceSetViewport = true;
     mForceSetBlendState = true;
 
-    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS; i++)
+    ASSERT(mForceSetVertexSamplerStates.size() == mCurVertexTextureSerials.size());
+    for (unsigned int i = 0; i < mForceSetVertexSamplerStates.size(); i++)
     {
         mForceSetVertexSamplerStates[i] = true;
         mCurVertexTextureSerials[i] = 0;
     }
-    for (unsigned int i = 0; i < gl::MAX_TEXTURE_IMAGE_UNITS; i++)
+
+    ASSERT(mForceSetPixelSamplerStates.size() == mCurPixelTextureSerials.size());
+    for (unsigned int i = 0; i < mForceSetPixelSamplerStates.size(); i++)
     {
         mForceSetPixelSamplerStates[i] = true;
         mCurPixelTextureSerials[i] = 0;
     }
 
     mAppliedIBSerial = 0;
-    mAppliedProgramBinarySerial = 0;
+    mAppliedVertexShader = NULL;
+    mAppliedPixelShader = NULL;
+    mAppliedProgramSerial = 0;
     mDxUniformsDirty = true;
 
     mVertexDeclarationCache.markStateDirty();
@@ -2028,11 +2053,11 @@ void Renderer9::markAllStateDirty()
 
 void Renderer9::releaseDeviceResources()
 {
-    while (!mEventQueryPool.empty())
+    for (size_t i = 0; i < mEventQueryPool.size(); i++)
     {
-        mEventQueryPool.back()->Release();
-        mEventQueryPool.pop_back();
+        SafeRelease(mEventQueryPool[i]);
     }
+    mEventQueryPool.clear();
 
     SafeRelease(mMaskedClearSavedState);
 
@@ -2043,15 +2068,14 @@ void Renderer9::releaseDeviceResources()
     SafeDelete(mVertexDataManager);
     SafeDelete(mIndexDataManager);
     SafeDelete(mLineLoopIB);
+    SafeDelete(mCountingIB);
 
     for (int i = 0; i < NUM_NULL_COLORBUFFER_CACHE_ENTRIES; i++)
     {
         SafeDelete(mNullColorbufferCache[i].buffer);
     }
-
 }
 
-
 void Renderer9::notifyDeviceLost()
 {
     mDeviceLost = true;
@@ -2221,7 +2245,7 @@ bool Renderer9::resetRemovedDevice()
     // The hardware adapter has been removed. Application must destroy the device, do enumeration of
     // adapters and create another Direct3D device. If application continues rendering without
     // calling Reset, the rendering calls will succeed. Applies to Direct3D 9Ex only.
-    deinitialize();
+    release();
     return (initialize() == EGL_SUCCESS);
 }
 
@@ -2255,97 +2279,6 @@ GUID Renderer9::getAdapterIdentifier() const
     return mAdapterIdentifier.DeviceIdentifier;
 }
 
-void Renderer9::getMultiSampleSupport(D3DFORMAT format, bool *multiSampleArray)
-{
-    for (int multiSampleIndex = 0; multiSampleIndex <= D3DMULTISAMPLE_16_SAMPLES; multiSampleIndex++)
-    {
-        HRESULT result = mD3d9->CheckDeviceMultiSampleType(mAdapter, mDeviceType, format,
-                                                           TRUE, (D3DMULTISAMPLE_TYPE)multiSampleIndex, NULL);
-
-        multiSampleArray[multiSampleIndex] = SUCCEEDED(result);
-    }
-}
-
-bool Renderer9::getBGRATextureSupport() const
-{
-    // DirectX 9 always supports BGRA
-    return true;
-}
-
-bool Renderer9::getDXT1TextureSupport()
-{
-    return mDXT1TextureSupport;
-}
-
-bool Renderer9::getDXT3TextureSupport()
-{
-    return mDXT3TextureSupport;
-}
-
-bool Renderer9::getDXT5TextureSupport()
-{
-    return mDXT5TextureSupport;
-}
-
-bool Renderer9::getDepthTextureSupport() const
-{
-    return mDepthTextureSupport;
-}
-
-bool Renderer9::getFloat32TextureSupport(bool *filtering, bool *renderable)
-{
-    *filtering = mFloat32FilterSupport;
-    *renderable = mFloat32RenderSupport;
-    return mFloat32TextureSupport;
-}
-
-bool Renderer9::getFloat16TextureSupport(bool *filtering, bool *renderable)
-{
-    *filtering = mFloat16FilterSupport;
-    *renderable = mFloat16RenderSupport;
-    return mFloat16TextureSupport;
-}
-
-bool Renderer9::getLuminanceTextureSupport()
-{
-    return mLuminanceTextureSupport;
-}
-
-bool Renderer9::getLuminanceAlphaTextureSupport()
-{
-    return mLuminanceAlphaTextureSupport;
-}
-
-bool Renderer9::getTextureFilterAnisotropySupport() const
-{
-    return mSupportsTextureFilterAnisotropy;
-}
-
-float Renderer9::getTextureMaxAnisotropy() const
-{
-    if (mSupportsTextureFilterAnisotropy)
-    {
-        return static_cast<float>(mDeviceCaps.MaxAnisotropy);
-    }
-    return 1.0f;
-}
-
-bool Renderer9::getEventQuerySupport()
-{
-    return mEventQuerySupport;
-}
-
-unsigned int Renderer9::getMaxVertexTextureImageUnits() const
-{
-    META_ASSERT(MAX_TEXTURE_IMAGE_UNITS_VTF_SM3 <= gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS);
-    return mVertexTextureSupport ? MAX_TEXTURE_IMAGE_UNITS_VTF_SM3 : 0;
-}
-
-unsigned int Renderer9::getMaxCombinedTextureImageUnits() const
-{
-    return gl::MAX_TEXTURE_IMAGE_UNITS + getMaxVertexTextureImageUnits();
-}
-
 unsigned int Renderer9::getReservedVertexUniformVectors() const
 {
     return 2;   // dx_ViewAdjust and dx_DepthRange.
@@ -2356,36 +2289,14 @@ unsigned int Renderer9::getReservedFragmentUniformVectors() const
     return 3;   // dx_ViewCoords, dx_DepthFront and dx_DepthRange.
 }
 
-unsigned int Renderer9::getMaxVertexUniformVectors() const
-{
-    return MAX_VERTEX_CONSTANT_VECTORS_D3D9 - getReservedVertexUniformVectors();
-}
-
-unsigned int Renderer9::getMaxFragmentUniformVectors() const
-{
-    const int maxPixelConstantVectors = (getMajorShaderModel() >= 3) ? MAX_PIXEL_CONSTANT_VECTORS_SM3 : MAX_PIXEL_CONSTANT_VECTORS_SM2;
-
-    return maxPixelConstantVectors - getReservedFragmentUniformVectors();
-}
-
-unsigned int Renderer9::getMaxVaryingVectors() const
+unsigned int Renderer9::getReservedVertexUniformBuffers() const
 {
-    return (getMajorShaderModel() >= 3) ? MAX_VARYING_VECTORS_SM3 : MAX_VARYING_VECTORS_SM2;
+    return 0;
 }
 
-bool Renderer9::getNonPower2TextureSupport() const
+unsigned int Renderer9::getReservedFragmentUniformBuffers() const
 {
-    return mSupportsNonPower2Textures;
-}
-
-bool Renderer9::getOcclusionQuerySupport() const
-{
-    return mOcclusionQuerySupport;
-}
-
-bool Renderer9::getInstancingSupport() const
-{
-    return mDeviceCaps.PixelShaderVersion >= D3DPS_VERSION(3, 0);
+    return 0;
 }
 
 bool Renderer9::getShareHandleSupport() const
@@ -2394,11 +2305,6 @@ bool Renderer9::getShareHandleSupport() const
     return (mD3d9Ex != NULL) && !gl::perfActive();
 }
 
-bool Renderer9::getDerivativeInstructionSupport() const
-{
-    return (mDeviceCaps.PS20Caps.Caps & D3DPS20CAPS_GRADIENTINSTRUCTIONS) != 0;
-}
-
 bool Renderer9::getPostSubBufferSupport() const
 {
     return true;
@@ -2409,34 +2315,6 @@ int Renderer9::getMajorShaderModel() const
     return D3DSHADER_VERSION_MAJOR(mDeviceCaps.PixelShaderVersion);
 }
 
-float Renderer9::getMaxPointSize() const
-{
-    // Point size clamped at 1.0f for SM2
-    return getMajorShaderModel() == 3 ? mDeviceCaps.MaxPointSize : 1.0f;
-}
-
-int Renderer9::getMaxViewportDimension() const
-{
-    int maxTextureDimension = std::min(std::min(getMaxTextureWidth(), getMaxTextureHeight()),
-                                       (int)gl::IMPLEMENTATION_MAX_TEXTURE_SIZE);
-    return maxTextureDimension;
-}
-
-int Renderer9::getMaxTextureWidth() const
-{
-    return (int)mDeviceCaps.MaxTextureWidth;
-}
-
-int Renderer9::getMaxTextureHeight() const
-{
-    return (int)mDeviceCaps.MaxTextureHeight;
-}
-
-bool Renderer9::get32BitIndexSupport() const
-{
-    return mDeviceCaps.MaxVertexIndex >= (1 << 16);
-}
-
 DWORD Renderer9::getCapsDeclTypes() const
 {
     return mDeviceCaps.DeclTypes;
@@ -2452,127 +2330,45 @@ int Renderer9::getMaxSwapInterval() const
     return mMaxSwapInterval;
 }
 
-int Renderer9::getMaxSupportedSamples() const
-{
-    return mMaxSupportedSamples;
-}
-
-int Renderer9::getNearestSupportedSamples(D3DFORMAT format, int requested) const
-{
-    if (requested == 0)
-    {
-        return requested;
-    }
-
-    std::map<D3DFORMAT, bool *>::const_iterator itr = mMultiSampleSupport.find(format);
-    if (itr == mMultiSampleSupport.end())
-    {
-        if (format == D3DFMT_UNKNOWN)
-            return 0;
-        return -1;
-    }
-
-    for (int i = requested; i <= D3DMULTISAMPLE_16_SAMPLES; ++i)
-    {
-        if (itr->second[i] && i != D3DMULTISAMPLE_NONMASKABLE)
-        {
-            return i;
-        }
-    }
-
-    return -1;
-}
-
-unsigned int Renderer9::getMaxRenderTargets() const
-{
-    // we do not support MRT in d3d9
-    return 1;
-}
-
-D3DFORMAT Renderer9::ConvertTextureInternalFormat(GLint internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_DEPTH_COMPONENT16:
-      case GL_DEPTH_COMPONENT32_OES:
-      case GL_DEPTH24_STENCIL8_OES:
-        return D3DFMT_INTZ;
-      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-        return D3DFMT_DXT1;
-      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-        return D3DFMT_DXT3;
-      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-        return D3DFMT_DXT5;
-      case GL_RGBA32F_EXT:
-      case GL_RGB32F_EXT:
-      case GL_ALPHA32F_EXT:
-      case GL_LUMINANCE32F_EXT:
-      case GL_LUMINANCE_ALPHA32F_EXT:
-        return D3DFMT_A32B32G32R32F;
-      case GL_RGBA16F_EXT:
-      case GL_RGB16F_EXT:
-      case GL_ALPHA16F_EXT:
-      case GL_LUMINANCE16F_EXT:
-      case GL_LUMINANCE_ALPHA16F_EXT:
-        return D3DFMT_A16B16G16R16F;
-      case GL_LUMINANCE8_EXT:
-        if (getLuminanceTextureSupport())
-        {
-            return D3DFMT_L8;
-        }
-        break;
-      case GL_LUMINANCE8_ALPHA8_EXT:
-        if (getLuminanceAlphaTextureSupport())
-        {
-            return D3DFMT_A8L8;
-        }
-        break;
-      case GL_RGB8_OES:
-      case GL_RGB565:
-        return D3DFMT_X8R8G8B8;
-    }
-
-    return D3DFMT_A8R8G8B8;
-}
-
-bool Renderer9::copyToRenderTarget(TextureStorageInterface2D *dest, TextureStorageInterface2D *source)
+bool Renderer9::copyToRenderTarget2D(TextureStorage *dest, TextureStorage *source)
 {
     bool result = false;
 
     if (source && dest)
     {
-        TextureStorage9_2D *source9 = TextureStorage9_2D::makeTextureStorage9_2D(source->getStorageInstance());
-        TextureStorage9_2D *dest9 = TextureStorage9_2D::makeTextureStorage9_2D(dest->getStorageInstance());
+        TextureStorage9_2D *source9 = TextureStorage9_2D::makeTextureStorage9_2D(source);
+        TextureStorage9_2D *dest9 = TextureStorage9_2D::makeTextureStorage9_2D(dest);
 
-        int levels = source9->levelCount();
+        int levels = source9->getLevelCount();
         for (int i = 0; i < levels; ++i)
         {
             IDirect3DSurface9 *srcSurf = source9->getSurfaceLevel(i, false);
             IDirect3DSurface9 *dstSurf = dest9->getSurfaceLevel(i, false);
-            
+
             result = copyToRenderTarget(dstSurf, srcSurf, source9->isManaged());
 
-            if (srcSurf) srcSurf->Release();
-            if (dstSurf) dstSurf->Release();
+            SafeRelease(srcSurf);
+            SafeRelease(dstSurf);
 
             if (!result)
+            {
                 return false;
+            }
         }
     }
 
     return result;
 }
 
-bool Renderer9::copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureStorageInterfaceCube *source)
+bool Renderer9::copyToRenderTargetCube(TextureStorage *dest, TextureStorage *source)
 {
     bool result = false;
 
     if (source && dest)
     {
-        TextureStorage9_Cube *source9 = TextureStorage9_Cube::makeTextureStorage9_Cube(source->getStorageInstance());
-        TextureStorage9_Cube *dest9 = TextureStorage9_Cube::makeTextureStorage9_Cube(dest->getStorageInstance());
-        int levels = source9->levelCount();
+        TextureStorage9_Cube *source9 = TextureStorage9_Cube::makeTextureStorage9_Cube(source);
+        TextureStorage9_Cube *dest9 = TextureStorage9_Cube::makeTextureStorage9_Cube(dest);
+        int levels = source9->getLevelCount();
         for (int f = 0; f < 6; f++)
         {
             for (int i = 0; i < levels; i++)
@@ -2582,11 +2378,13 @@ bool Renderer9::copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureSto
 
                 result = copyToRenderTarget(dstSurf, srcSurf, source9->isManaged());
 
-                if (srcSurf) srcSurf->Release();
-                if (dstSurf) dstSurf->Release();
+                SafeRelease(srcSurf);
+                SafeRelease(dstSurf);
 
                 if (!result)
+                {
                     return false;
+                }
             }
         }
     }
@@ -2594,6 +2392,20 @@ bool Renderer9::copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureSto
     return result;
 }
 
+bool Renderer9::copyToRenderTarget3D(TextureStorage *dest, TextureStorage *source)
+{
+    // 3D textures are not available in the D3D9 backend.
+    UNREACHABLE();
+    return false;
+}
+
+bool Renderer9::copyToRenderTarget2DArray(TextureStorage *dest, TextureStorage *source)
+{
+    // 2D array textures are not supported by the D3D9 backend.
+    UNREACHABLE();
+    return false;
+}
+
 D3DPOOL Renderer9::getBufferPool(DWORD usage) const
 {
     if (mD3d9Ex != NULL)
@@ -2611,8 +2423,8 @@ D3DPOOL Renderer9::getBufferPool(DWORD usage) const
     return D3DPOOL_DEFAULT;
 }
 
-bool Renderer9::copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                          GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level)
+bool Renderer9::copyImage2D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                            GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level)
 {
     RECT rect;
     rect.left = sourceRect.x;
@@ -2620,11 +2432,11 @@ bool Renderer9::copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sou
     rect.right = sourceRect.x + sourceRect.width;
     rect.bottom = sourceRect.y + sourceRect.height;
 
-    return mBlit->copy(framebuffer, rect, destFormat, xoffset, yoffset, storage, level);
+    return mBlit->copy2D(framebuffer, rect, destFormat, xoffset, yoffset, storage, level);
 }
 
-bool Renderer9::copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                          GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level)
+bool Renderer9::copyImageCube(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                              GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level)
 {
     RECT rect;
     rect.left = sourceRect.x;
@@ -2632,18 +2444,36 @@ bool Renderer9::copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sou
     rect.right = sourceRect.x + sourceRect.width;
     rect.bottom = sourceRect.y + sourceRect.height;
 
-    return mBlit->copy(framebuffer, rect, destFormat, xoffset, yoffset, storage, target, level);
+    return mBlit->copyCube(framebuffer, rect, destFormat, xoffset, yoffset, storage, target, level);
+}
+
+bool Renderer9::copyImage3D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                            GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level)
+{
+    // 3D textures are not available in the D3D9 backend.
+    UNREACHABLE();
+    return false;
+}
+
+bool Renderer9::copyImage2DArray(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                                 GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level)
+{
+    // 2D array textures are not available in the D3D9 backend.
+    UNREACHABLE();
+    return false;
 }
 
 bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &readRect, gl::Framebuffer *drawFramebuffer, const gl::Rectangle &drawRect,
-                         bool blitRenderTarget, bool blitDepthStencil)
+                         const gl::Rectangle *scissor, bool blitRenderTarget, bool blitDepth, bool blitStencil, GLenum filter)
 {
+    ASSERT(filter == GL_NEAREST);
+
     endScene();
 
     if (blitRenderTarget)
     {
-        gl::Renderbuffer *readBuffer = readFramebuffer->getColorbuffer(0);
-        gl::Renderbuffer *drawBuffer = drawFramebuffer->getColorbuffer(0);
+        gl::FramebufferAttachment *readBuffer = readFramebuffer->getColorbuffer(0);
+        gl::FramebufferAttachment *drawBuffer = drawFramebuffer->getColorbuffer(0);
         RenderTarget9 *readRenderTarget = NULL;
         RenderTarget9 *drawRenderTarget = NULL;
         IDirect3DSurface9* readSurface = NULL;
@@ -2651,11 +2481,11 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
 
         if (readBuffer)
         {
-            readRenderTarget = RenderTarget9::makeRenderTarget9(readBuffer->getRenderTarget());
+            readRenderTarget = d3d9::GetAttachmentRenderTarget(readBuffer);
         }
         if (drawBuffer)
         {
-            drawRenderTarget = RenderTarget9::makeRenderTarget9(drawBuffer->getRenderTarget());
+            drawRenderTarget = d3d9::GetAttachmentRenderTarget(drawBuffer);
         }
 
         if (readRenderTarget)
@@ -2673,6 +2503,9 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
             return gl::error(GL_OUT_OF_MEMORY, false);
         }
 
+        gl::Extents srcSize(readRenderTarget->getWidth(), readRenderTarget->getHeight(), 1);
+        gl::Extents dstSize(drawRenderTarget->getWidth(), drawRenderTarget->getHeight(), 1);
+
         RECT srcRect;
         srcRect.left = readRect.x;
         srcRect.right = readRect.x + readRect.width;
@@ -2685,10 +2518,79 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
         dstRect.top = drawRect.y;
         dstRect.bottom = drawRect.y + drawRect.height;
 
+        // Clip the rectangles to the scissor rectangle
+        if (scissor)
+        {
+            if (dstRect.left < scissor->x)
+            {
+                srcRect.left += (scissor->x - dstRect.left);
+                dstRect.left = scissor->x;
+            }
+            if (dstRect.top < scissor->y)
+            {
+                srcRect.top += (scissor->y - dstRect.top);
+                dstRect.top = scissor->y;
+            }
+            if (dstRect.right > scissor->x + scissor->width)
+            {
+                srcRect.right -= (dstRect.right - (scissor->x + scissor->width));
+                dstRect.right = scissor->x + scissor->width;
+            }
+            if (dstRect.bottom > scissor->y + scissor->height)
+            {
+                srcRect.bottom -= (dstRect.bottom - (scissor->y + scissor->height));
+                dstRect.bottom = scissor->y + scissor->height;
+            }
+        }
+
+        // Clip the rectangles to the destination size
+        if (dstRect.left < 0)
+        {
+            srcRect.left += -dstRect.left;
+            dstRect.left = 0;
+        }
+        if (dstRect.right > dstSize.width)
+        {
+            srcRect.right -= (dstRect.right - dstSize.width);
+            dstRect.right = dstSize.width;
+        }
+        if (dstRect.top < 0)
+        {
+            srcRect.top += -dstRect.top;
+            dstRect.top = 0;
+        }
+        if (dstRect.bottom > dstSize.height)
+        {
+            srcRect.bottom -= (dstRect.bottom - dstSize.height);
+            dstRect.bottom = dstSize.height;
+        }
+
+        // Clip the rectangles to the source size
+        if (srcRect.left < 0)
+        {
+            dstRect.left += -srcRect.left;
+            srcRect.left = 0;
+        }
+        if (srcRect.right > srcSize.width)
+        {
+            dstRect.right -= (srcRect.right - srcSize.width);
+            srcRect.right = srcSize.width;
+        }
+        if (srcRect.top < 0)
+        {
+            dstRect.top += -srcRect.top;
+            srcRect.top = 0;
+        }
+        if (srcRect.bottom > srcSize.height)
+        {
+            dstRect.bottom -= (srcRect.bottom - srcSize.height);
+            srcRect.bottom = srcSize.height;
+        }
+
         HRESULT result = mDevice->StretchRect(readSurface, &srcRect, drawSurface, &dstRect, D3DTEXF_NONE);
 
-        readSurface->Release();
-        drawSurface->Release();
+        SafeRelease(readSurface);
+        SafeRelease(drawSurface);
 
         if (FAILED(result))
         {
@@ -2697,10 +2599,10 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
         }
     }
 
-    if (blitDepthStencil)
+    if (blitDepth || blitStencil)
     {
-        gl::Renderbuffer *readBuffer = readFramebuffer->getDepthOrStencilbuffer();
-        gl::Renderbuffer *drawBuffer = drawFramebuffer->getDepthOrStencilbuffer();
+        gl::FramebufferAttachment *readBuffer = readFramebuffer->getDepthOrStencilbuffer();
+        gl::FramebufferAttachment *drawBuffer = drawFramebuffer->getDepthOrStencilbuffer();
         RenderTarget9 *readDepthStencil = NULL;
         RenderTarget9 *drawDepthStencil = NULL;
         IDirect3DSurface9* readSurface = NULL;
@@ -2708,11 +2610,11 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
 
         if (readBuffer)
         {
-            readDepthStencil = RenderTarget9::makeRenderTarget9(readBuffer->getDepthStencil());
+            readDepthStencil = d3d9::GetAttachmentRenderTarget(readBuffer);
         }
         if (drawBuffer)
         {
-            drawDepthStencil = RenderTarget9::makeRenderTarget9(drawBuffer->getDepthStencil());
+            drawDepthStencil = d3d9::GetAttachmentRenderTarget(drawBuffer);
         }
 
         if (readDepthStencil)
@@ -2732,8 +2634,8 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
 
         HRESULT result = mDevice->StretchRect(readSurface, NULL, drawSurface, NULL, D3DTEXF_NONE);
 
-        readSurface->Release();
-        drawSurface->Release();
+        SafeRelease(readSurface);
+        SafeRelease(drawSurface);
 
         if (FAILED(result))
         {
@@ -2745,18 +2647,20 @@ bool Renderer9::blitRect(gl::Framebuffer *readFramebuffer, const gl::Rectangle &
     return true;
 }
 
-void Renderer9::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, 
-                           GLsizei outputPitch, bool packReverseRowOrder, GLint packAlignment, void* pixels)
+gl::Error Renderer9::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format,
+                                GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels)
 {
+    ASSERT(pack.pixelBuffer.get() == NULL);
+
     RenderTarget9 *renderTarget = NULL;
     IDirect3DSurface9 *surface = NULL;
-    gl::Renderbuffer *colorbuffer = framebuffer->getColorbuffer(0);
+    gl::FramebufferAttachment *colorbuffer = framebuffer->getColorbuffer(0);
 
     if (colorbuffer)
     {
-        renderTarget = RenderTarget9::makeRenderTarget9(colorbuffer->getRenderTarget());
+        renderTarget = d3d9::GetAttachmentRenderTarget(colorbuffer);
     }
-    
+
     if (renderTarget)
     {
         surface = renderTarget->getSurface();
@@ -2765,7 +2669,7 @@ void Renderer9::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsiz
     if (!surface)
     {
         // context must be lost
-        return;
+        return gl::Error(GL_NO_ERROR);
     }
 
     D3DSURFACE_DESC desc;
@@ -2774,20 +2678,20 @@ void Renderer9::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsiz
     if (desc.MultiSampleType != D3DMULTISAMPLE_NONE)
     {
         UNIMPLEMENTED();   // FIXME: Requires resolve using StretchRect into non-multisampled render target
-        surface->Release();
-        return gl::error(GL_OUT_OF_MEMORY);
+        SafeRelease(surface);
+        return gl::Error(GL_OUT_OF_MEMORY, "ReadPixels is unimplemented for multisampled framebuffer attachments.");
     }
 
     HRESULT result;
     IDirect3DSurface9 *systemSurface = NULL;
-    bool directToPixels = !packReverseRowOrder && packAlignment <= 4 && getShareHandleSupport() &&
+    bool directToPixels = !pack.reverseRowOrder && pack.alignment <= 4 && getShareHandleSupport() &&
                           x == 0 && y == 0 && UINT(width) == desc.Width && UINT(height) == desc.Height &&
                           desc.Format == D3DFMT_A8R8G8B8 && format == GL_BGRA_EXT && type == GL_UNSIGNED_BYTE;
     if (directToPixels)
     {
         // Use the pixels ptr as a shared handle to write directly into client's memory
         result = mDevice->CreateOffscreenPlainSurface(desc.Width, desc.Height, desc.Format,
-                                                      D3DPOOL_SYSTEMMEM, &systemSurface, &pixels);
+                                                      D3DPOOL_SYSTEMMEM, &systemSurface, reinterpret_cast<void**>(&pixels));
         if (FAILED(result))
         {
             // Try again without the shared handle
@@ -2802,38 +2706,36 @@ void Renderer9::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsiz
         if (FAILED(result))
         {
             ASSERT(result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY);
-            surface->Release();
-            return gl::error(GL_OUT_OF_MEMORY);
+            SafeRelease(surface);
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal texture for ReadPixels.");
         }
     }
 
     result = mDevice->GetRenderTargetData(surface, systemSurface);
-    surface->Release();
-    surface = NULL;
+    SafeRelease(surface);
 
     if (FAILED(result))
     {
-        systemSurface->Release();
+        SafeRelease(systemSurface);
 
         // It turns out that D3D will sometimes produce more error
         // codes than those documented.
         if (d3d9::isDeviceLostError(result))
         {
             notifyDeviceLost();
-            return gl::error(GL_OUT_OF_MEMORY);
         }
         else
         {
             UNREACHABLE();
-            return;
         }
 
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to read internal render target data.");
     }
 
     if (directToPixels)
     {
-        systemSurface->Release();
-        return;
+        SafeRelease(systemSurface);
+        return gl::Error(GL_NO_ERROR);
     }
 
     RECT rect;
@@ -2848,252 +2750,79 @@ void Renderer9::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsiz
     if (FAILED(result))
     {
         UNREACHABLE();
-        systemSurface->Release();
+        SafeRelease(systemSurface);
 
-        return;   // No sensible error to generate
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to lock internal render target.");
     }
 
-    unsigned char *dest = (unsigned char*)pixels;
-    unsigned short *dest16 = (unsigned short*)pixels;
-
-    unsigned char *source;
+    uint8_t *source;
     int inputPitch;
-    if (packReverseRowOrder)
+    if (pack.reverseRowOrder)
     {
-        source = ((unsigned char*)lock.pBits) + lock.Pitch * (rect.bottom - rect.top - 1);
+        source = reinterpret_cast<uint8_t*>(lock.pBits) + lock.Pitch * (rect.bottom - rect.top - 1);
         inputPitch = -lock.Pitch;
     }
     else
     {
-        source = (unsigned char*)lock.pBits;
+        source = reinterpret_cast<uint8_t*>(lock.pBits);
         inputPitch = lock.Pitch;
     }
 
-    unsigned int fastPixelSize = 0;
-
-    if (desc.Format == D3DFMT_A8R8G8B8 &&
-        format == GL_BGRA_EXT &&
-        type == GL_UNSIGNED_BYTE)
-    {
-        fastPixelSize = 4;
-    }
-    else if ((desc.Format == D3DFMT_A4R4G4B4 &&
-             format == GL_BGRA_EXT &&
-             type == GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT) ||
-             (desc.Format == D3DFMT_A1R5G5B5 &&
-             format == GL_BGRA_EXT &&
-             type == GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT))
-    {
-        fastPixelSize = 2;
-    }
-    else if (desc.Format == D3DFMT_A16B16G16R16F &&
-             format == GL_RGBA &&
-             type == GL_HALF_FLOAT_OES)
+    const d3d9::D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(desc.Format);
+    const gl::InternalFormat &sourceFormatInfo = gl::GetInternalFormatInfo(d3dFormatInfo.internalFormat);
+    if (sourceFormatInfo.format == format && sourceFormatInfo.type == type)
     {
-        fastPixelSize = 8;
+        // Direct copy possible
+        for (int y = 0; y < rect.bottom - rect.top; y++)
+        {
+            memcpy(pixels + y * outputPitch, source + y * inputPitch, (rect.right - rect.left) * sourceFormatInfo.pixelBytes);
+        }
     }
-    else if (desc.Format == D3DFMT_A32B32G32R32F &&
-             format == GL_RGBA &&
-             type == GL_FLOAT)
+    else
     {
-        fastPixelSize = 16;
-    }
+        const d3d9::D3DFormat &sourceD3DFormatInfo = d3d9::GetD3DFormatInfo(desc.Format);
+        ColorCopyFunction fastCopyFunc = sourceD3DFormatInfo.getFastCopyFunction(format, type);
 
-    for (int j = 0; j < rect.bottom - rect.top; j++)
-    {
-        if (fastPixelSize != 0)
-        {
-            // Fast path for formats which require no translation:
-            // D3DFMT_A8R8G8B8 to BGRA/UNSIGNED_BYTE
-            // D3DFMT_A4R4G4B4 to BGRA/UNSIGNED_SHORT_4_4_4_4_REV_EXT
-            // D3DFMT_A1R5G5B5 to BGRA/UNSIGNED_SHORT_1_5_5_5_REV_EXT
-            // D3DFMT_A16B16G16R16F to RGBA/HALF_FLOAT_OES
-            // D3DFMT_A32B32G32R32F to RGBA/FLOAT
-            // 
-            // Note that buffers with no alpha go through the slow path below.
-            memcpy(dest + j * outputPitch,
-                   source + j * inputPitch,
-                   (rect.right - rect.left) * fastPixelSize);
-            continue;
-        }
-        else if (desc.Format == D3DFMT_A8R8G8B8 &&
-                 format == GL_RGBA &&
-                 type == GL_UNSIGNED_BYTE)
-        {
-            // Fast path for swapping red with blue
-            for (int i = 0; i < rect.right - rect.left; i++)
-            {
-                unsigned int argb = *(unsigned int*)(source + 4 * i + j * inputPitch);
-                *(unsigned int*)(dest + 4 * i + j * outputPitch) =
-                    (argb & 0xFF00FF00) |       // Keep alpha and green
-                    (argb & 0x00FF0000) >> 16 | // Move red to blue
-                    (argb & 0x000000FF) << 16;  // Move blue to red
-            }
-            continue;
-        }
+        const gl::FormatType &destFormatTypeInfo = gl::GetFormatTypeInfo(format, type);
+        const gl::InternalFormat &destFormatInfo = gl::GetInternalFormatInfo(destFormatTypeInfo.internalFormat);
 
-        for (int i = 0; i < rect.right - rect.left; i++)
+        if (fastCopyFunc)
         {
-            float r;
-            float g;
-            float b;
-            float a;
-
-            switch (desc.Format)
+            // Fast copy is possible through some special function
+            for (int y = 0; y < rect.bottom - rect.top; y++)
             {
-              case D3DFMT_R5G6B5:
+                for (int x = 0; x < rect.right - rect.left; x++)
                 {
-                    unsigned short rgb = *(unsigned short*)(source + 2 * i + j * inputPitch);
+                    uint8_t *dest = pixels + y * outputPitch + x * destFormatInfo.pixelBytes;
+                    const uint8_t *src = source + y * inputPitch + x * sourceFormatInfo.pixelBytes;
 
-                    a = 1.0f;
-                    b = (rgb & 0x001F) * (1.0f / 0x001F);
-                    g = (rgb & 0x07E0) * (1.0f / 0x07E0);
-                    r = (rgb & 0xF800) * (1.0f / 0xF800);
+                    fastCopyFunc(src, dest);
                 }
-                break;
-              case D3DFMT_A1R5G5B5:
-                {
-                    unsigned short argb = *(unsigned short*)(source + 2 * i + j * inputPitch);
-
-                    a = (argb & 0x8000) ? 1.0f : 0.0f;
-                    b = (argb & 0x001F) * (1.0f / 0x001F);
-                    g = (argb & 0x03E0) * (1.0f / 0x03E0);
-                    r = (argb & 0x7C00) * (1.0f / 0x7C00);
-                }
-                break;
-              case D3DFMT_A8R8G8B8:
-                {
-                    unsigned int argb = *(unsigned int*)(source + 4 * i + j * inputPitch);
-
-                    a = (argb & 0xFF000000) * (1.0f / 0xFF000000);
-                    b = (argb & 0x000000FF) * (1.0f / 0x000000FF);
-                    g = (argb & 0x0000FF00) * (1.0f / 0x0000FF00);
-                    r = (argb & 0x00FF0000) * (1.0f / 0x00FF0000);
-                }
-                break;
-              case D3DFMT_X8R8G8B8:
-                {
-                    unsigned int xrgb = *(unsigned int*)(source + 4 * i + j * inputPitch);
-
-                    a = 1.0f;
-                    b = (xrgb & 0x000000FF) * (1.0f / 0x000000FF);
-                    g = (xrgb & 0x0000FF00) * (1.0f / 0x0000FF00);
-                    r = (xrgb & 0x00FF0000) * (1.0f / 0x00FF0000);
-                }
-                break;
-              case D3DFMT_A2R10G10B10:
-                {
-                    unsigned int argb = *(unsigned int*)(source + 4 * i + j * inputPitch);
-
-                    a = (argb & 0xC0000000) * (1.0f / 0xC0000000);
-                    b = (argb & 0x000003FF) * (1.0f / 0x000003FF);
-                    g = (argb & 0x000FFC00) * (1.0f / 0x000FFC00);
-                    r = (argb & 0x3FF00000) * (1.0f / 0x3FF00000);
-                }
-                break;
-              case D3DFMT_A32B32G32R32F:
-                {
-                    // float formats in D3D are stored rgba, rather than the other way round
-                    r = *((float*)(source + 16 * i + j * inputPitch) + 0);
-                    g = *((float*)(source + 16 * i + j * inputPitch) + 1);
-                    b = *((float*)(source + 16 * i + j * inputPitch) + 2);
-                    a = *((float*)(source + 16 * i + j * inputPitch) + 3);
-                }
-                break;
-              case D3DFMT_A16B16G16R16F:
-                {
-                    // float formats in D3D are stored rgba, rather than the other way round
-                    r = gl::float16ToFloat32(*((unsigned short*)(source + 8 * i + j * inputPitch) + 0));
-                    g = gl::float16ToFloat32(*((unsigned short*)(source + 8 * i + j * inputPitch) + 1));
-                    b = gl::float16ToFloat32(*((unsigned short*)(source + 8 * i + j * inputPitch) + 2));
-                    a = gl::float16ToFloat32(*((unsigned short*)(source + 8 * i + j * inputPitch) + 3));
-                }
-                break;
-              default:
-                UNIMPLEMENTED();   // FIXME
-                UNREACHABLE();
-                return;
             }
-
-            switch (format)
+        }
+        else
+        {
+            uint8_t temp[sizeof(gl::ColorF)];
+            for (int y = 0; y < rect.bottom - rect.top; y++)
             {
-              case GL_RGBA:
-                switch (type)
+                for (int x = 0; x < rect.right - rect.left; x++)
                 {
-                  case GL_UNSIGNED_BYTE:
-                    dest[4 * i + j * outputPitch + 0] = (unsigned char)(255 * r + 0.5f);
-                    dest[4 * i + j * outputPitch + 1] = (unsigned char)(255 * g + 0.5f);
-                    dest[4 * i + j * outputPitch + 2] = (unsigned char)(255 * b + 0.5f);
-                    dest[4 * i + j * outputPitch + 3] = (unsigned char)(255 * a + 0.5f);
-                    break;
-                  default: UNREACHABLE();
-                }
-                break;
-              case GL_BGRA_EXT:
-                switch (type)
-                {
-                  case GL_UNSIGNED_BYTE:
-                    dest[4 * i + j * outputPitch + 0] = (unsigned char)(255 * b + 0.5f);
-                    dest[4 * i + j * outputPitch + 1] = (unsigned char)(255 * g + 0.5f);
-                    dest[4 * i + j * outputPitch + 2] = (unsigned char)(255 * r + 0.5f);
-                    dest[4 * i + j * outputPitch + 3] = (unsigned char)(255 * a + 0.5f);
-                    break;
-                  case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:
-                    // According to the desktop GL spec in the "Transfer of Pixel Rectangles" section
-                    // this type is packed as follows:
-                    //   15   14   13   12   11   10    9    8    7    6    5    4    3    2    1    0
-                    //  --------------------------------------------------------------------------------
-                    // |       4th         |        3rd         |        2nd        |   1st component   |
-                    //  --------------------------------------------------------------------------------
-                    // in the case of BGRA_EXT, B is the first component, G the second, and so forth.
-                    dest16[i + j * outputPitch / sizeof(unsigned short)] =
-                        ((unsigned short)(15 * a + 0.5f) << 12)|
-                        ((unsigned short)(15 * r + 0.5f) << 8) |
-                        ((unsigned short)(15 * g + 0.5f) << 4) |
-                        ((unsigned short)(15 * b + 0.5f) << 0);
-                    break;
-                  case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:
-                    // According to the desktop GL spec in the "Transfer of Pixel Rectangles" section
-                    // this type is packed as follows:
-                    //   15   14   13   12   11   10    9    8    7    6    5    4    3    2    1    0
-                    //  --------------------------------------------------------------------------------
-                    // | 4th |          3rd           |           2nd          |      1st component     |
-                    //  --------------------------------------------------------------------------------
-                    // in the case of BGRA_EXT, B is the first component, G the second, and so forth.
-                    dest16[i + j * outputPitch / sizeof(unsigned short)] =
-                        ((unsigned short)(     a + 0.5f) << 15) |
-                        ((unsigned short)(31 * r + 0.5f) << 10) |
-                        ((unsigned short)(31 * g + 0.5f) << 5) |
-                        ((unsigned short)(31 * b + 0.5f) << 0);
-                    break;
-                  default: UNREACHABLE();
-                }
-                break;
-              case GL_RGB:
-                switch (type)
-                {
-                  case GL_UNSIGNED_SHORT_5_6_5:
-                    dest16[i + j * outputPitch / sizeof(unsigned short)] = 
-                        ((unsigned short)(31 * b + 0.5f) << 0) |
-                        ((unsigned short)(63 * g + 0.5f) << 5) |
-                        ((unsigned short)(31 * r + 0.5f) << 11);
-                    break;
-                  case GL_UNSIGNED_BYTE:
-                    dest[3 * i + j * outputPitch + 0] = (unsigned char)(255 * r + 0.5f);
-                    dest[3 * i + j * outputPitch + 1] = (unsigned char)(255 * g + 0.5f);
-                    dest[3 * i + j * outputPitch + 2] = (unsigned char)(255 * b + 0.5f);
-                    break;
-                  default: UNREACHABLE();
+                    uint8_t *dest = pixels + y * outputPitch + x * destFormatInfo.pixelBytes;
+                    const uint8_t *src = source + y * inputPitch + x * sourceFormatInfo.pixelBytes;
+
+                    // readFunc and writeFunc will be using the same type of color, CopyTexImage
+                    // will not allow the copy otherwise.
+                    sourceD3DFormatInfo.colorReadFunction(src, temp);
+                    destFormatTypeInfo.colorWriteFunction(temp, dest);
                 }
-                break;
-              default: UNREACHABLE();
             }
         }
     }
 
     systemSurface->UnlockRect();
+    SafeRelease(systemSurface);
 
-    systemSurface->Release();
+    return gl::Error(GL_NO_ERROR);
 }
 
 RenderTarget *Renderer9::createRenderTarget(SwapChain *swapChain, bool depth)
@@ -3114,14 +2843,34 @@ RenderTarget *Renderer9::createRenderTarget(SwapChain *swapChain, bool depth)
     return renderTarget;
 }
 
-RenderTarget *Renderer9::createRenderTarget(int width, int height, GLenum format, GLsizei samples, bool depth)
+RenderTarget *Renderer9::createRenderTarget(int width, int height, GLenum format, GLsizei samples)
 {
     RenderTarget9 *renderTarget = new RenderTarget9(this, width, height, format, samples);
     return renderTarget;
 }
 
-ShaderExecutable *Renderer9::loadExecutable(const void *function, size_t length, rx::ShaderType type)
+ShaderImpl *Renderer9::createShader(GLenum type)
+{
+    return new ShaderD3D(type, this);
+}
+
+ProgramImpl *Renderer9::createProgram()
+{
+    return new ProgramD3D(this);
+}
+
+void Renderer9::releaseShaderCompiler()
+{
+    ShaderD3D::releaseCompiler();
+}
+
+ShaderExecutable *Renderer9::loadExecutable(const void *function, size_t length, rx::ShaderType type,
+                                            const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                            bool separatedOutputBuffers)
 {
+    // Transform feedback is not supported in ES2 or D3D9
+    ASSERT(transformFeedbackVaryings.size() == 0);
+
     ShaderExecutable9 *executable = NULL;
 
     switch (type)
@@ -3152,8 +2901,13 @@ ShaderExecutable *Renderer9::loadExecutable(const void *function, size_t length,
     return executable;
 }
 
-ShaderExecutable *Renderer9::compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type, D3DWorkaroundType workaround)
+ShaderExecutable *Renderer9::compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type,
+                                                 const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                                 bool separatedOutputBuffers, D3DWorkaroundType workaround)
 {
+    // Transform feedback is not supported in ES2 or D3D9
+    ASSERT(transformFeedbackVaryings.size() == 0);
+
     const char *profile = NULL;
 
     switch (type)
@@ -3169,20 +2923,67 @@ ShaderExecutable *Renderer9::compileToExecutable(gl::InfoLog &infoLog, const cha
         return NULL;
     }
 
-    // ANGLE issue 486:
-    // Work-around a D3D9 compiler bug that presents itself when using conditional discard, by disabling optimization
-    UINT optimizationFlags = (workaround == ANGLE_D3D_WORKAROUND_SM3_OPTIMIZER ? D3DCOMPILE_SKIP_OPTIMIZATION : ANGLE_COMPILE_OPTIMIZATION_LEVEL);
+    UINT flags = ANGLE_COMPILE_OPTIMIZATION_LEVEL;
+
+    if (workaround == ANGLE_D3D_WORKAROUND_SKIP_OPTIMIZATION)
+    {
+        flags = D3DCOMPILE_SKIP_OPTIMIZATION;
+    }
+    else if (workaround == ANGLE_D3D_WORKAROUND_MAX_OPTIMIZATION)
+    {
+        flags = D3DCOMPILE_OPTIMIZATION_LEVEL3;
+    }
+    else ASSERT(workaround == ANGLE_D3D_WORKAROUND_NONE);
+
+    if (gl::perfActive())
+    {
+#ifndef NDEBUG
+        flags = D3DCOMPILE_SKIP_OPTIMIZATION;
+#endif
+
+        flags |= D3DCOMPILE_DEBUG;
+
+        std::string sourcePath = getTempPath();
+        std::string sourceText = std::string("#line 2 \"") + sourcePath + std::string("\"\n\n") + std::string(shaderHLSL);
+        writeFile(sourcePath.c_str(), sourceText.c_str(), sourceText.size());
+    }
+
+    // Sometimes D3DCompile will fail with the default compilation flags for complicated shaders when it would otherwise pass with alternative options.
+    // Try the default flags first and if compilation fails, try some alternatives.
+    const UINT extraFlags[] =
+    {
+        flags,
+        flags | D3DCOMPILE_AVOID_FLOW_CONTROL,
+        flags | D3DCOMPILE_PREFER_FLOW_CONTROL
+    };
 
-    ID3DBlob *binary = (ID3DBlob*)compileToBinary(infoLog, shaderHLSL, profile, optimizationFlags, true);
+    const static char *extraFlagNames[] =
+    {
+        "default",
+        "avoid flow control",
+        "prefer flow control"
+    };
+
+    int attempts = ArraySize(extraFlags);
+
+    ID3DBlob *binary = (ID3DBlob*)mCompiler.compileToBinary(infoLog, shaderHLSL, profile, extraFlags, extraFlagNames, attempts);
     if (!binary)
+    {
         return NULL;
+    }
 
-    ShaderExecutable *executable = loadExecutable(binary->GetBufferPointer(), binary->GetBufferSize(), type);
-    binary->Release();
+    ShaderExecutable *executable = loadExecutable(binary->GetBufferPointer(), binary->GetBufferSize(), type,
+                                                  transformFeedbackVaryings, separatedOutputBuffers);
+    SafeRelease(binary);
 
     return executable;
 }
 
+rx::UniformStorage *Renderer9::createUniformStorage(size_t storageSize)
+{
+    return new UniformStorage(storageSize);
+}
+
 bool Renderer9::boxFilter(IDirect3DSurface9 *source, IDirect3DSurface9 *dest)
 {
     return mBlit->boxFilter(source, dest);
@@ -3223,7 +3024,7 @@ bool Renderer9::copyToRenderTarget(IDirect3DSurface9 *dest, IDirect3DSurface9 *s
             {
                 Image9::copyLockableSurfaces(surf, source);
                 result = mDevice->UpdateSurface(surf, NULL, dest, NULL);
-                surf->Release();
+                SafeRelease(surf);
             }
         }
         else
@@ -3260,14 +3061,42 @@ TextureStorage *Renderer9::createTextureStorage2D(SwapChain *swapChain)
     return new TextureStorage9_2D(this, swapChain9);
 }
 
-TextureStorage *Renderer9::createTextureStorage2D(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height)
+TextureStorage *Renderer9::createTextureStorage2D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels)
+{
+    return new TextureStorage9_2D(this, internalformat, renderTarget, width, height, levels);
+}
+
+TextureStorage *Renderer9::createTextureStorageCube(GLenum internalformat, bool renderTarget, int size, int levels)
+{
+    return new TextureStorage9_Cube(this, internalformat, renderTarget, size, levels);
+}
+
+TextureStorage *Renderer9::createTextureStorage3D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels)
+{
+    // 3D textures are not supported by the D3D9 backend.
+    UNREACHABLE();
+
+    return NULL;
+}
+
+TextureStorage *Renderer9::createTextureStorage2DArray(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels)
 {
-    return new TextureStorage9_2D(this, levels, internalformat, usage, forceRenderable, width, height);
+    // 2D array textures are not supported by the D3D9 backend.
+    UNREACHABLE();
+
+    return NULL;
 }
 
-TextureStorage *Renderer9::createTextureStorageCube(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size)
+TextureImpl *Renderer9::createTexture(GLenum target)
 {
-    return new TextureStorage9_Cube(this, levels, internalformat, usage, forceRenderable, size);
+    switch(target)
+    {
+      case GL_TEXTURE_2D:       return new TextureD3D_2D(this);
+      case GL_TEXTURE_CUBE_MAP: return new TextureD3D_Cube(this);
+      default:                  UNREACHABLE();
+    }
+
+    return NULL;
 }
 
 bool Renderer9::getLUID(LUID *adapterLuid) const
@@ -3284,4 +3113,19 @@ bool Renderer9::getLUID(LUID *adapterLuid) const
     return false;
 }
 
+rx::VertexConversionType Renderer9::getVertexConversionType(const gl::VertexFormat &vertexFormat) const
+{
+    return d3d9::GetVertexFormatInfo(getCapsDeclTypes(), vertexFormat).conversionType;
+}
+
+GLenum Renderer9::getVertexComponentType(const gl::VertexFormat &vertexFormat) const
+{
+    return d3d9::GetVertexFormatInfo(getCapsDeclTypes(), vertexFormat).componentType;
+}
+
+void Renderer9::generateCaps(gl::Caps *outCaps, gl::TextureCapsMap *outTextureCaps, gl::Extensions *outExtensions) const
+{
+    d3d9_gl::GenerateCaps(mD3d9, mDevice, mDeviceType, mAdapter, outCaps, outTextureCaps, outExtensions);
+}
+
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.h
new file mode 100644
index 0000000000..dd5f30268a
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.h
@@ -0,0 +1,342 @@
+//
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// Renderer9.h: Defines a back-end specific class for the D3D9 renderer.
+
+#ifndef LIBGLESV2_RENDERER_RENDERER9_H_
+#define LIBGLESV2_RENDERER_RENDERER9_H_
+
+#include "common/angleutils.h"
+#include "common/mathutil.h"
+#include "libGLESv2/renderer/d3d/HLSLCompiler.h"
+#include "libGLESv2/renderer/d3d/d3d9/ShaderCache.h"
+#include "libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.h"
+#include "libGLESv2/renderer/Renderer.h"
+#include "libGLESv2/renderer/RenderTarget.h"
+
+namespace gl
+{
+class FramebufferAttachment;
+}
+
+namespace rx
+{
+class VertexDataManager;
+class IndexDataManager;
+class StreamingIndexBufferInterface;
+class StaticIndexBufferInterface;
+struct TranslatedAttribute;
+class Blit9;
+
+class Renderer9 : public Renderer
+{
+  public:
+    Renderer9(egl::Display *display, EGLNativeDisplayType hDc, EGLint requestedDisplay);
+    virtual ~Renderer9();
+
+    static Renderer9 *makeRenderer9(Renderer *renderer);
+
+    virtual EGLint initialize();
+    virtual bool resetDevice();
+
+    virtual int generateConfigs(ConfigDesc **configDescList);
+    virtual void deleteConfigs(ConfigDesc *configDescList);
+
+    void startScene();
+    void endScene();
+
+    virtual void sync(bool block);
+
+    virtual SwapChain *createSwapChain(HWND window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat);
+
+    IDirect3DQuery9* allocateEventQuery();
+    void freeEventQuery(IDirect3DQuery9* query);
+
+    // resource creation
+    IDirect3DVertexShader9 *createVertexShader(const DWORD *function, size_t length);
+    IDirect3DPixelShader9 *createPixelShader(const DWORD *function, size_t length);
+    HRESULT createVertexBuffer(UINT Length, DWORD Usage, IDirect3DVertexBuffer9 **ppVertexBuffer);
+    HRESULT createIndexBuffer(UINT Length, DWORD Usage, D3DFORMAT Format, IDirect3DIndexBuffer9 **ppIndexBuffer);
+    virtual gl::Error generateSwizzle(gl::Texture *texture);
+    virtual gl::Error setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler);
+    virtual gl::Error setTexture(gl::SamplerType type, int index, gl::Texture *texture);
+
+    virtual gl::Error setUniformBuffers(const gl::Buffer *vertexUniformBuffers[], const gl::Buffer *fragmentUniformBuffers[]);
+
+    virtual gl::Error setRasterizerState(const gl::RasterizerState &rasterState);
+    virtual gl::Error setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::ColorF &blendColor,
+                                    unsigned int sampleMask);
+    virtual gl::Error setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
+                                           int stencilBackRef, bool frontFaceCCW);
+
+    virtual void setScissorRectangle(const gl::Rectangle &scissor, bool enabled);
+    virtual void setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
+                             bool ignoreViewport);
+
+    virtual gl::Error applyRenderTarget(gl::Framebuffer *frameBuffer);
+    virtual gl::Error applyShaders(gl::ProgramBinary *programBinary, const gl::VertexFormat inputLayout[], const gl::Framebuffer *framebuffer,
+                                   bool rasterizerDiscard, bool transformFeedbackActive);
+    virtual gl::Error applyUniforms(const gl::ProgramBinary &programBinary);
+    virtual bool applyPrimitiveType(GLenum primitiveType, GLsizei elementCount);
+    virtual gl::Error applyVertexBuffer(gl::ProgramBinary *programBinary, const gl::VertexAttribute vertexAttributes[], const gl::VertexAttribCurrentValueData currentValues[],
+                                        GLint first, GLsizei count, GLsizei instances);
+    virtual gl::Error applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo);
+
+    virtual void applyTransformFeedbackBuffers(gl::Buffer *transformFeedbackBuffers[], GLintptr offsets[]);
+
+    virtual gl::Error drawArrays(GLenum mode, GLsizei count, GLsizei instances, bool transformFeedbackActive);
+    virtual gl::Error drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices,
+                                   gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances);
+
+    virtual gl::Error clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer);
+
+    virtual void markAllStateDirty();
+
+    // lost device
+    void notifyDeviceLost();
+    virtual bool isDeviceLost();
+    virtual bool testDeviceLost(bool notify);
+    virtual bool testDeviceResettable();
+
+    IDirect3DDevice9 *getDevice() { return mDevice; }
+    virtual DWORD getAdapterVendor() const;
+    virtual std::string getRendererDescription() const;
+    virtual GUID getAdapterIdentifier() const;
+
+    virtual unsigned int getReservedVertexUniformVectors() const;
+    virtual unsigned int getReservedFragmentUniformVectors() const;
+    virtual unsigned int getReservedVertexUniformBuffers() const;
+    virtual unsigned int getReservedFragmentUniformBuffers() const;
+    virtual bool getShareHandleSupport() const;
+    virtual bool getPostSubBufferSupport() const;
+
+    virtual int getMajorShaderModel() const;
+    DWORD getCapsDeclTypes() const;
+    virtual int getMinSwapInterval() const;
+    virtual int getMaxSwapInterval() const;
+
+    // Pixel operations
+    virtual bool copyToRenderTarget2D(TextureStorage *dest, TextureStorage *source);
+    virtual bool copyToRenderTargetCube(TextureStorage *dest, TextureStorage *source);
+    virtual bool copyToRenderTarget3D(TextureStorage *dest, TextureStorage *source);
+    virtual bool copyToRenderTarget2DArray(TextureStorage *dest, TextureStorage *source);
+
+    virtual bool copyImage2D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, TextureStorage *storage, GLint level);
+    virtual bool copyImageCube(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                               GLint xoffset, GLint yoffset, TextureStorage *storage, GLenum target, GLint level);
+    virtual bool copyImage3D(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                             GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level);
+    virtual bool copyImage2DArray(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
+                                  GLint xoffset, GLint yoffset, GLint zOffset, TextureStorage *storage, GLint level);
+
+    virtual bool blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
+                          const gl::Rectangle *scissor, bool blitRenderTarget, bool blitDepth, bool blitStencil, GLenum filter);
+
+    virtual gl::Error readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format,
+                                 GLenum type, GLuint outputPitch, const gl::PixelPackState &pack, uint8_t *pixels);
+
+    // RenderTarget creation
+    virtual RenderTarget *createRenderTarget(SwapChain *swapChain, bool depth);
+    virtual RenderTarget *createRenderTarget(int width, int height, GLenum format, GLsizei samples);
+
+    // Shader creation
+    virtual ShaderImpl *createShader(GLenum type);
+    virtual ProgramImpl *createProgram();
+
+    // Shader operations
+    virtual void releaseShaderCompiler();
+    virtual ShaderExecutable *loadExecutable(const void *function, size_t length, rx::ShaderType type,
+                                             const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                             bool separatedOutputBuffers);
+    virtual ShaderExecutable *compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type,
+                                                  const std::vector<gl::LinkedVarying> &transformFeedbackVaryings,
+                                                  bool separatedOutputBuffers, D3DWorkaroundType workaround);
+    virtual UniformStorage *createUniformStorage(size_t storageSize);
+
+    // Image operations
+    virtual Image *createImage();
+    virtual void generateMipmap(Image *dest, Image *source);
+    virtual TextureStorage *createTextureStorage2D(SwapChain *swapChain);
+    virtual TextureStorage *createTextureStorage2D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels);
+    virtual TextureStorage *createTextureStorageCube(GLenum internalformat, bool renderTarget, int size, int levels);
+    virtual TextureStorage *createTextureStorage3D(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels);
+    virtual TextureStorage *createTextureStorage2DArray(GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, GLsizei depth, int levels);
+
+    // Texture creation
+    virtual TextureImpl *createTexture(GLenum target);
+
+    // Buffer creation
+    virtual BufferImpl *createBuffer();
+    virtual VertexBuffer *createVertexBuffer();
+    virtual IndexBuffer *createIndexBuffer();
+
+    // Vertex Array creation
+    virtual VertexArrayImpl *createVertexArray();
+
+    // Query and Fence creation
+    virtual QueryImpl *createQuery(GLenum type);
+    virtual FenceImpl *createFence();
+
+    // Transform Feedback creation
+    virtual TransformFeedbackImpl* createTransformFeedback();
+
+    // Buffer-to-texture and Texture-to-buffer copies
+    virtual bool supportsFastCopyBufferToTexture(GLenum internalFormat) const;
+    virtual bool fastCopyBufferToTexture(const gl::PixelUnpackState &unpack, unsigned int offset, RenderTarget *destRenderTarget,
+                                         GLenum destinationFormat, GLenum sourcePixelsType, const gl::Box &destArea);
+
+    // D3D9-renderer specific methods
+    bool boxFilter(IDirect3DSurface9 *source, IDirect3DSurface9 *dest);
+
+    D3DPOOL getTexturePool(DWORD usage) const;
+
+    virtual bool getLUID(LUID *adapterLuid) const;
+    virtual rx::VertexConversionType getVertexConversionType(const gl::VertexFormat &vertexFormat) const;
+    virtual GLenum getVertexComponentType(const gl::VertexFormat &vertexFormat) const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(Renderer9);
+
+    virtual void generateCaps(gl::Caps *outCaps, gl::TextureCapsMap *outTextureCaps, gl::Extensions *outExtensions) const;
+
+    void release();
+
+    void applyUniformnfv(gl::LinkedUniform *targetUniform, const GLfloat *v);
+    void applyUniformniv(gl::LinkedUniform *targetUniform, const GLint *v);
+    void applyUniformnbv(gl::LinkedUniform *targetUniform, const GLint *v);
+
+    gl::Error drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer);
+    gl::Error drawIndexedPoints(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer);
+
+    gl::Error getCountingIB(size_t count, StaticIndexBufferInterface **outIB);
+
+    bool copyToRenderTarget(IDirect3DSurface9 *dest, IDirect3DSurface9 *source, bool fromManaged);
+    gl::FramebufferAttachment *getNullColorbuffer(gl::FramebufferAttachment *depthbuffer);
+
+    D3DPOOL getBufferPool(DWORD usage) const;
+
+    HMODULE mD3d9Module;
+    HDC mDc;
+
+    void initializeDevice();
+    D3DPRESENT_PARAMETERS getDefaultPresentParameters();
+    void releaseDeviceResources();
+
+    HRESULT getDeviceStatusCode();
+    bool isRemovedDeviceResettable() const;
+    bool resetRemovedDevice();
+
+    UINT mAdapter;
+    D3DDEVTYPE mDeviceType;
+    IDirect3D9 *mD3d9;  // Always valid after successful initialization.
+    IDirect3D9Ex *mD3d9Ex;  // Might be null if D3D9Ex is not supported.
+    IDirect3DDevice9 *mDevice;
+    IDirect3DDevice9Ex *mDeviceEx;  // Might be null if D3D9Ex is not supported.
+
+    HLSLCompiler mCompiler;
+
+    Blit9 *mBlit;
+
+    HWND mDeviceWindow;
+
+    bool mDeviceLost;
+    D3DCAPS9 mDeviceCaps;
+    D3DADAPTER_IDENTIFIER9 mAdapterIdentifier;
+
+    D3DPRIMITIVETYPE mPrimitiveType;
+    int mPrimitiveCount;
+    GLsizei mRepeatDraw;
+
+    bool mSceneStarted;
+    int mMinSwapInterval;
+    int mMaxSwapInterval;
+
+    bool mVertexTextureSupport;
+
+    // current render target states
+    unsigned int mAppliedRenderTargetSerial;
+    unsigned int mAppliedDepthbufferSerial;
+    unsigned int mAppliedStencilbufferSerial;
+    bool mDepthStencilInitialized;
+    bool mRenderTargetDescInitialized;
+    rx::RenderTarget::Desc mRenderTargetDesc;
+    unsigned int mCurStencilSize;
+    unsigned int mCurDepthSize;
+
+    IDirect3DStateBlock9 *mMaskedClearSavedState;
+
+    // previously set render states
+    bool mForceSetDepthStencilState;
+    gl::DepthStencilState mCurDepthStencilState;
+    int mCurStencilRef;
+    int mCurStencilBackRef;
+    bool mCurFrontFaceCCW;
+
+    bool mForceSetRasterState;
+    gl::RasterizerState mCurRasterState;
+
+    bool mForceSetScissor;
+    gl::Rectangle mCurScissor;
+    bool mScissorEnabled;
+
+    bool mForceSetViewport;
+    gl::Rectangle mCurViewport;
+    float mCurNear;
+    float mCurFar;
+    float mCurDepthFront;
+
+    bool mForceSetBlendState;
+    gl::BlendState mCurBlendState;
+    gl::ColorF mCurBlendColor;
+    GLuint mCurSampleMask;
+
+    // Currently applied sampler states
+    std::vector<bool> mForceSetVertexSamplerStates;
+    std::vector<gl::SamplerState> mCurVertexSamplerStates;
+
+    std::vector<bool> mForceSetPixelSamplerStates;
+    std::vector<gl::SamplerState> mCurPixelSamplerStates;
+
+    // Currently applied textures
+    std::vector<unsigned int> mCurVertexTextureSerials;
+    std::vector<unsigned int> mCurPixelTextureSerials;
+
+    unsigned int mAppliedIBSerial;
+    IDirect3DVertexShader9 *mAppliedVertexShader;
+    IDirect3DPixelShader9 *mAppliedPixelShader;
+    unsigned int mAppliedProgramSerial;
+
+    rx::dx_VertexConstants mVertexConstants;
+    rx::dx_PixelConstants mPixelConstants;
+    bool mDxUniformsDirty;
+
+    // A pool of event queries that are currently unused.
+    std::vector<IDirect3DQuery9*> mEventQueryPool;
+    VertexShaderCache mVertexShaderCache;
+    PixelShaderCache mPixelShaderCache;
+
+    VertexDataManager *mVertexDataManager;
+    VertexDeclarationCache mVertexDeclarationCache;
+
+    IndexDataManager *mIndexDataManager;
+    StreamingIndexBufferInterface *mLineLoopIB;
+    StaticIndexBufferInterface *mCountingIB;
+
+    enum { NUM_NULL_COLORBUFFER_CACHE_ENTRIES = 12 };
+    struct NullColorbufferCacheEntry
+    {
+        UINT lruCount;
+        int width;
+        int height;
+        gl::FramebufferAttachment *buffer;
+    } mNullColorbufferCache[NUM_NULL_COLORBUFFER_CACHE_ENTRIES];
+    UINT mMaxNullColorbufferLRU;
+
+};
+
+}
+#endif // LIBGLESV2_RENDERER_RENDERER9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/ShaderCache.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/ShaderCache.h
index 4391ac271a..2ad3022839 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/ShaderCache.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/ShaderCache.h
@@ -12,6 +12,10 @@
 
 #include "common/debug.h"
 
+#include <cstddef>
+#include <unordered_map>
+#include <string>
+
 namespace rx
 {
 template <typename ShaderObject>
@@ -53,7 +57,7 @@ class ShaderCache
         // Random eviction policy.
         if (mMap.size() >= kMaxMapSize)
         {
-            mMap.begin()->second->Release();
+            SafeRelease(mMap.begin()->second);
             mMap.erase(mMap.begin());
         }
 
@@ -67,7 +71,7 @@ class ShaderCache
     {
         for (typename Map::iterator it = mMap.begin(); it != mMap.end(); ++it)
         {
-            it->second->Release();
+            SafeRelease(it->second);
         }
 
         mMap.clear();
@@ -88,15 +92,7 @@ class ShaderCache
         return mDevice->CreatePixelShader(function, shader);
     }
 
-#ifndef HASH_MAP
-# ifdef _MSC_VER
-#  define HASH_MAP stdext::hash_map
-# else
-#  define HASH_MAP std::unordered_map
-# endif
-#endif
-
-    typedef HASH_MAP<std::string, ShaderObject*> Map;
+    typedef std::unordered_map<std::string, ShaderObject*> Map;
     Map mMap;
 
     IDirect3DDevice9 *mDevice;
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/ShaderExecutable9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.cpp
index 5decf9664d..bc7120461b 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/ShaderExecutable9.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -8,7 +7,7 @@
 // ShaderExecutable9.cpp: Implements a D3D9-specific class to contain shader
 // executable implementation details.
 
-#include "libGLESv2/renderer/d3d9/ShaderExecutable9.h"
+#include "libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.h"
 
 #include "common/debug.h"
 
@@ -31,14 +30,8 @@ ShaderExecutable9::ShaderExecutable9(const void *function, size_t length, IDirec
 
 ShaderExecutable9::~ShaderExecutable9()
 {
-    if (mVertexExecutable)
-    {
-        mVertexExecutable->Release();
-    }
-    if (mPixelExecutable)
-    {
-        mPixelExecutable->Release();
-    }
+    SafeRelease(mVertexExecutable);
+    SafeRelease(mPixelExecutable);
 }
 
 ShaderExecutable9 *ShaderExecutable9::makeShaderExecutable9(ShaderExecutable *executable)
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/ShaderExecutable9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.h
index fa1e6c2844..fa1e6c2844 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/ShaderExecutable9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.h
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/SwapChain9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp
index dd8895d18d..0aeaabb1ca 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/SwapChain9.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp
@@ -1,15 +1,15 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
 // SwapChain9.cpp: Implements a back-end specific class for the D3D9 swap chain.
 
-#include "libGLESv2/renderer/d3d9/SwapChain9.h"
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/SwapChain9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
 
 namespace rx
 {
@@ -35,43 +35,21 @@ SwapChain9::~SwapChain9()
 
 void SwapChain9::release()
 {
-    if (mSwapChain)
-    {
-        mSwapChain->Release();
-        mSwapChain = NULL;
-    }
-
-    if (mBackBuffer)
-    {
-        mBackBuffer->Release();
-        mBackBuffer = NULL;
-    }
-
-    if (mDepthStencil)
-    {
-        mDepthStencil->Release();
-        mDepthStencil = NULL;
-    }
-
-    if (mRenderTarget)
-    {
-        mRenderTarget->Release();
-        mRenderTarget = NULL;
-    }
-
-    if (mOffscreenTexture)
-    {
-        mOffscreenTexture->Release();
-        mOffscreenTexture = NULL;
-    }
+    SafeRelease(mSwapChain);
+    SafeRelease(mBackBuffer);
+    SafeRelease(mDepthStencil);
+    SafeRelease(mRenderTarget);
+    SafeRelease(mOffscreenTexture);
 
     if (mWindow)
+    {
         mShareHandle = NULL;
+    }
 }
 
 static DWORD convertInterval(EGLint interval)
 {
-#if ANGLE_FORCE_VSYNC_OFF
+#ifdef ANGLE_FORCE_VSYNC_OFF
     return D3DPRESENT_INTERVAL_IMMEDIATE;
 #else
     switch(interval)
@@ -111,29 +89,10 @@ EGLint SwapChain9::reset(int backbufferWidth, int backbufferHeight, EGLint swapI
 
     // Release specific resources to free up memory for the new render target, while the
     // old render target still exists for the purpose of preserving its contents.
-    if (mSwapChain)
-    {
-        mSwapChain->Release();
-        mSwapChain = NULL;
-    }
-
-    if (mBackBuffer)
-    {
-        mBackBuffer->Release();
-        mBackBuffer = NULL;
-    }
-
-    if (mOffscreenTexture)
-    {
-        mOffscreenTexture->Release();
-        mOffscreenTexture = NULL;
-    }
-
-    if (mDepthStencil)
-    {
-        mDepthStencil->Release();
-        mDepthStencil = NULL;
-    }
+    SafeRelease(mSwapChain);
+    SafeRelease(mBackBuffer);
+    SafeRelease(mOffscreenTexture);
+    SafeRelease(mDepthStencil);
 
     HANDLE *pShareHandle = NULL;
     if (!mWindow && mRenderer->getShareHandleSupport())
@@ -141,9 +100,10 @@ EGLint SwapChain9::reset(int backbufferWidth, int backbufferHeight, EGLint swapI
         pShareHandle = &mShareHandle;
     }
 
+    const d3d9::TextureFormat &backBufferd3dFormatInfo = d3d9::GetTextureFormatInfo(mBackBufferFormat);
     result = device->CreateTexture(backbufferWidth, backbufferHeight, 1, D3DUSAGE_RENDERTARGET,
-                                   gl_d3d9::ConvertRenderbufferFormat(mBackBufferFormat), D3DPOOL_DEFAULT,
-                                   &mOffscreenTexture, pShareHandle);
+                                   backBufferd3dFormatInfo.texFormat, D3DPOOL_DEFAULT, &mOffscreenTexture,
+                                   pShareHandle);
     if (FAILED(result))
     {
         ERR("Could not create offscreen texture: %08lX", result);
@@ -187,15 +147,17 @@ EGLint SwapChain9::reset(int backbufferWidth, int backbufferHeight, EGLint swapI
         result = device->StretchRect(oldRenderTarget, &rect, mRenderTarget, &rect, D3DTEXF_NONE);
         ASSERT(SUCCEEDED(result));
 
-        oldRenderTarget->Release();
+        SafeRelease(oldRenderTarget);
     }
 
+    const d3d9::TextureFormat &depthBufferd3dFormatInfo = d3d9::GetTextureFormatInfo(mDepthBufferFormat);
+
     if (mWindow)
     {
         D3DPRESENT_PARAMETERS presentParameters = {0};
-        presentParameters.AutoDepthStencilFormat = gl_d3d9::ConvertRenderbufferFormat(mDepthBufferFormat);
+        presentParameters.AutoDepthStencilFormat = depthBufferd3dFormatInfo.renderFormat;
         presentParameters.BackBufferCount = 1;
-        presentParameters.BackBufferFormat = gl_d3d9::ConvertRenderbufferFormat(mBackBufferFormat);
+        presentParameters.BackBufferFormat = backBufferd3dFormatInfo.renderFormat;
         presentParameters.EnableAutoDepthStencil = FALSE;
         presentParameters.Flags = 0;
         presentParameters.hDeviceWindow = mWindow;
@@ -247,7 +209,7 @@ EGLint SwapChain9::reset(int backbufferWidth, int backbufferHeight, EGLint swapI
     if (mDepthBufferFormat != GL_NONE)
     {
         result = device->CreateDepthStencilSurface(backbufferWidth, backbufferHeight,
-                                                   gl_d3d9::ConvertRenderbufferFormat(mDepthBufferFormat),
+                                                   depthBufferd3dFormatInfo.renderFormat,
                                                    D3DMULTISAMPLE_NONE, 0, FALSE, &mDepthStencil, NULL);
 
         if (FAILED(result))
@@ -276,7 +238,7 @@ EGLint SwapChain9::reset(int backbufferWidth, int backbufferHeight, EGLint swapI
 }
 
 // parameters should be validated/clamped by caller
-EGLint SwapChain9::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
+EGLint SwapChain9::swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint)
 {
     if (!mSwapChain)
     {
@@ -356,6 +318,14 @@ EGLint SwapChain9::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
         return EGL_BAD_ALLOC;
     }
 
+    // On Windows 8 systems, IDirect3DSwapChain9::Present sometimes returns 0x88760873 when the windows is
+    // in the process of entering/exiting fullscreen. This code doesn't seem to have any documentation.  The
+    // device appears to be ok after emitting this error so simply return a failure to swap.
+    if (result == 0x88760873)
+    {
+        return EGL_BAD_MATCH;
+    }
+
     // http://crbug.com/313210
     // If our swap failed, trigger a device lost event. Resetting will work around an AMD-specific
     // device removed bug with lost contexts when reinstalling drivers.
@@ -370,6 +340,7 @@ EGLint SwapChain9::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
 
 // Increments refcount on surface.
 // caller must Release() the returned surface
+// TODO: remove the AddRef to match SwapChain11
 IDirect3DSurface9 *SwapChain9::getRenderTarget()
 {
     if (mRenderTarget)
@@ -382,6 +353,7 @@ IDirect3DSurface9 *SwapChain9::getRenderTarget()
 
 // Increments refcount on surface.
 // caller must Release() the returned surface
+// TODO: remove the AddRef to match SwapChain11
 IDirect3DSurface9 *SwapChain9::getDepthStencil()
 {
     if (mDepthStencil)
@@ -394,6 +366,7 @@ IDirect3DSurface9 *SwapChain9::getDepthStencil()
 
 // Increments refcount on texture.
 // caller must Release() the returned texture
+// TODO: remove the AddRef to match SwapChain11
 IDirect3DTexture9 *SwapChain9::getOffscreenTexture()
 {
     if (mOffscreenTexture)
@@ -434,10 +407,10 @@ void SwapChain9::recreate()
         return;
     }
 
-    mSwapChain->Release();
+    SafeRelease(mSwapChain);
     mSwapChain = newSwapChain;
 
-    mBackBuffer->Release();
+    SafeRelease(mBackBuffer);
     result = mSwapChain->GetBackBuffer(0, D3DBACKBUFFER_TYPE_MONO, &mBackBuffer);
     ASSERT(SUCCEEDED(result));
 }
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/SwapChain9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h
index 16a62bd86f..4d756f80d1 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/SwapChain9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h
@@ -25,7 +25,7 @@ class SwapChain9 : public SwapChain
 
     EGLint resize(EGLint backbufferWidth, EGLint backbufferHeight);
     virtual EGLint reset(EGLint backbufferWidth, EGLint backbufferHeight, EGLint swapInterval);
-    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height);
+    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint);
     virtual void recreate();
 
     virtual IDirect3DSurface9 *getRenderTarget();
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/TextureStorage9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/TextureStorage9.cpp
index 2486a9a5bf..f44e33db18 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/TextureStorage9.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/TextureStorage9.cpp
@@ -1,6 +1,5 @@
-#include "precompiled.h"
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -9,18 +8,20 @@
 // classes TextureStorage9_2D and TextureStorage9_Cube, which act as the interface to the
 // D3D9 texture.
 
-#include "libGLESv2/main.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-#include "libGLESv2/renderer/d3d9/TextureStorage9.h"
-#include "libGLESv2/renderer/d3d9/SwapChain9.h"
-#include "libGLESv2/renderer/d3d9/RenderTarget9.h"
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/TextureStorage9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/SwapChain9.h"
+#include "libGLESv2/renderer/d3d/d3d9/RenderTarget9.h"
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/d3d/TextureD3D.h"
 #include "libGLESv2/Texture.h"
+#include "libGLESv2/main.h"
 
 namespace rx
 {
 TextureStorage9::TextureStorage9(Renderer *renderer, DWORD usage)
-    : mLodOffset(0),
+    : mTopLevel(0),
       mRenderer(Renderer9::makeRenderer9(renderer)),
       mD3DUsage(usage),
       mD3DPool(mRenderer->getTexturePool(usage))
@@ -37,46 +38,24 @@ TextureStorage9 *TextureStorage9::makeTextureStorage9(TextureStorage *storage)
     return static_cast<TextureStorage9*>(storage);
 }
 
-DWORD TextureStorage9::GetTextureUsage(D3DFORMAT d3dfmt, GLenum glusage, bool forceRenderable)
+DWORD TextureStorage9::GetTextureUsage(GLenum internalformat, bool renderTarget)
 {
     DWORD d3dusage = 0;
 
-    if (d3dfmt == D3DFMT_INTZ)
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+    const d3d9::TextureFormat &d3dFormatInfo = d3d9::GetTextureFormatInfo(internalformat);
+    if (formatInfo.depthBits > 0 || formatInfo.stencilBits > 0)
     {
         d3dusage |= D3DUSAGE_DEPTHSTENCIL;
     }
-    else if(forceRenderable || (TextureStorage9::IsTextureFormatRenderable(d3dfmt) && (glusage == GL_FRAMEBUFFER_ATTACHMENT_ANGLE)))
+    else if (renderTarget && (d3dFormatInfo.renderFormat != D3DFMT_UNKNOWN))
     {
         d3dusage |= D3DUSAGE_RENDERTARGET;
     }
+
     return d3dusage;
 }
 
-bool TextureStorage9::IsTextureFormatRenderable(D3DFORMAT format)
-{
-    if (format == D3DFMT_INTZ)
-    {
-        return true;
-    }
-    switch(format)
-    {
-      case D3DFMT_L8:
-      case D3DFMT_A8L8:
-      case D3DFMT_DXT1:
-      case D3DFMT_DXT3:
-      case D3DFMT_DXT5:
-        return false;
-      case D3DFMT_A8R8G8B8:
-      case D3DFMT_X8R8G8B8:
-      case D3DFMT_A16B16G16R16F:
-      case D3DFMT_A32B32G32R32F:
-        return true;
-      default:
-        UNREACHABLE();
-    }
-
-    return false;
-}
 
 bool TextureStorage9::isRenderTarget() const
 {
@@ -98,27 +77,29 @@ DWORD TextureStorage9::getUsage() const
     return mD3DUsage;
 }
 
-int TextureStorage9::getLodOffset() const
+int TextureStorage9::getTopLevel() const
 {
-    return mLodOffset;
+    return mTopLevel;
 }
 
-int TextureStorage9::levelCount()
+int TextureStorage9::getLevelCount() const
 {
-    return getBaseTexture() ? getBaseTexture()->GetLevelCount() - getLodOffset() : 0;
+    return getBaseTexture() ? (getBaseTexture()->GetLevelCount() - getTopLevel()) : 0;
 }
 
-TextureStorage9_2D::TextureStorage9_2D(Renderer *renderer, SwapChain9 *swapchain) : TextureStorage9(renderer, D3DUSAGE_RENDERTARGET)
+TextureStorage9_2D::TextureStorage9_2D(Renderer *renderer, SwapChain9 *swapchain)
+    : TextureStorage9(renderer, D3DUSAGE_RENDERTARGET)
 {
     IDirect3DTexture9 *surfaceTexture = swapchain->getOffscreenTexture();
     mTexture = surfaceTexture;
     mRenderTarget = NULL;
 
     initializeRenderTarget();
+    initializeSerials(1, 1);
 }
 
-TextureStorage9_2D::TextureStorage9_2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height)
-    : TextureStorage9(renderer, GetTextureUsage(Renderer9::makeRenderer9(renderer)->ConvertTextureInternalFormat(internalformat), usage, forceRenderable))
+TextureStorage9_2D::TextureStorage9_2D(Renderer *renderer, GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels)
+    : TextureStorage9(renderer, GetTextureUsage(internalformat, renderTarget))
 {
     mTexture = NULL;
     mRenderTarget = NULL;
@@ -127,9 +108,11 @@ TextureStorage9_2D::TextureStorage9_2D(Renderer *renderer, int levels, GLenum in
     if (width > 0 && height > 0)
     {
         IDirect3DDevice9 *device = mRenderer->getDevice();
-        gl::MakeValidSize(false, gl::IsCompressed(internalformat), &width, &height, &mLodOffset);
-        HRESULT result = device->CreateTexture(width, height, levels ? levels + mLodOffset : 0, getUsage(),
-                                               mRenderer->ConvertTextureInternalFormat(internalformat), getPool(), &mTexture, NULL);
+        const d3d9::TextureFormat &d3dFormatInfo = d3d9::GetTextureFormatInfo(internalformat);
+        d3d9::MakeValidSize(false, d3dFormatInfo.texFormat, &width, &height, &mTopLevel);
+        UINT creationLevels = (levels == 0) ? 0 : mTopLevel + levels;
+
+        HRESULT result = device->CreateTexture(width, height, creationLevels, getUsage(), d3dFormatInfo.texFormat, getPool(), &mTexture, NULL);
 
         if (FAILED(result))
         {
@@ -139,16 +122,13 @@ TextureStorage9_2D::TextureStorage9_2D(Renderer *renderer, int levels, GLenum in
     }
 
     initializeRenderTarget();
+    initializeSerials(getLevelCount(), 1);
 }
 
 TextureStorage9_2D::~TextureStorage9_2D()
 {
-    if (mTexture)
-    {
-        mTexture->Release();
-    }
-
-    delete mRenderTarget;
+    SafeRelease(mTexture);
+    SafeDelete(mRenderTarget);
 }
 
 TextureStorage9_2D *TextureStorage9_2D::makeTextureStorage9_2D(TextureStorage *storage)
@@ -165,11 +145,12 @@ IDirect3DSurface9 *TextureStorage9_2D::getSurfaceLevel(int level, bool dirty)
 
     if (mTexture)
     {
-        HRESULT result = mTexture->GetSurfaceLevel(level + mLodOffset, &surface);
+        HRESULT result = mTexture->GetSurfaceLevel(level + mTopLevel, &surface);
+        UNUSED_ASSERTION_VARIABLE(result);
         ASSERT(SUCCEEDED(result));
 
         // With managed textures the driver needs to be informed of updates to the lower mipmap levels
-        if (level + mLodOffset != 0 && isManaged() && dirty)
+        if (level + mTopLevel != 0 && isManaged() && dirty)
         {
             mTexture->AddDirtyRect(NULL);
         }
@@ -178,23 +159,28 @@ IDirect3DSurface9 *TextureStorage9_2D::getSurfaceLevel(int level, bool dirty)
     return surface;
 }
 
-RenderTarget *TextureStorage9_2D::getRenderTarget()
+RenderTarget *TextureStorage9_2D::getRenderTarget(const gl::ImageIndex &/*index*/)
 {
     return mRenderTarget;
 }
 
-void TextureStorage9_2D::generateMipmap(int level)
+void TextureStorage9_2D::generateMipmaps()
 {
-    IDirect3DSurface9 *upper = getSurfaceLevel(level - 1, false);
-    IDirect3DSurface9 *lower = getSurfaceLevel(level, true);
+    // Base level must already be defined
 
-    if (upper != NULL && lower != NULL)
+    for (int level = 1; level < getLevelCount(); level++)
     {
-        mRenderer->boxFilter(upper, lower);
-    }
+        IDirect3DSurface9 *upper = getSurfaceLevel(level - 1, false);
+        IDirect3DSurface9 *lower = getSurfaceLevel(level, true);
+
+        if (upper != NULL && lower != NULL)
+        {
+            mRenderer->boxFilter(upper, lower);
+        }
 
-    if (upper != NULL) upper->Release();
-    if (lower != NULL) lower->Release();
+        SafeRelease(upper);
+        SafeRelease(lower);
+    }
 }
 
 IDirect3DBaseTexture9 *TextureStorage9_2D::getBaseTexture() const
@@ -214,8 +200,8 @@ void TextureStorage9_2D::initializeRenderTarget()
     }
 }
 
-TextureStorage9_Cube::TextureStorage9_Cube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size)
-    : TextureStorage9(renderer, GetTextureUsage(Renderer9::makeRenderer9(renderer)->ConvertTextureInternalFormat(internalformat), usage, forceRenderable))
+TextureStorage9_Cube::TextureStorage9_Cube(Renderer *renderer, GLenum internalformat, bool renderTarget, int size, int levels)
+    : TextureStorage9(renderer, GetTextureUsage(internalformat, renderTarget))
 {
     mTexture = NULL;
     for (int i = 0; i < 6; ++i)
@@ -229,9 +215,11 @@ TextureStorage9_Cube::TextureStorage9_Cube(Renderer *renderer, int levels, GLenu
     {
         IDirect3DDevice9 *device = mRenderer->getDevice();
         int height = size;
-        gl::MakeValidSize(false, gl::IsCompressed(internalformat), &size, &height, &mLodOffset);
-        HRESULT result = device->CreateCubeTexture(size, levels ? levels + mLodOffset : 0, getUsage(),
-                                                   mRenderer->ConvertTextureInternalFormat(internalformat), getPool(), &mTexture, NULL);
+        const d3d9::TextureFormat &d3dFormatInfo = d3d9::GetTextureFormatInfo(internalformat);
+        d3d9::MakeValidSize(false, d3dFormatInfo.texFormat, &size, &height, &mTopLevel);
+        UINT creationLevels = (levels == 0) ? 0 : mTopLevel + levels;
+
+        HRESULT result = device->CreateCubeTexture(size, creationLevels, getUsage(), d3dFormatInfo.texFormat, getPool(), &mTexture, NULL);
 
         if (FAILED(result))
         {
@@ -241,18 +229,16 @@ TextureStorage9_Cube::TextureStorage9_Cube(Renderer *renderer, int levels, GLenu
     }
 
     initializeRenderTarget();
+    initializeSerials(getLevelCount() * 6, 6);
 }
 
 TextureStorage9_Cube::~TextureStorage9_Cube()
 {
-    if (mTexture)
-    {
-        mTexture->Release();
-    }
+    SafeRelease(mTexture);
 
     for (int i = 0; i < 6; ++i)
     {
-        delete mRenderTarget[i];
+        SafeDelete(mRenderTarget[i]);
     }
 }
 
@@ -271,7 +257,8 @@ IDirect3DSurface9 *TextureStorage9_Cube::getCubeMapSurface(GLenum faceTarget, in
     if (mTexture)
     {
         D3DCUBEMAP_FACES face = gl_d3d9::ConvertCubeFace(faceTarget);
-        HRESULT result = mTexture->GetCubeMapSurface(face, level + mLodOffset, &surface);
+        HRESULT result = mTexture->GetCubeMapSurface(face, level + mTopLevel, &surface);
+        UNUSED_ASSERTION_VARIABLE(result);
         ASSERT(SUCCEEDED(result));
 
         // With managed textures the driver needs to be informed of updates to the lower mipmap levels
@@ -284,23 +271,31 @@ IDirect3DSurface9 *TextureStorage9_Cube::getCubeMapSurface(GLenum faceTarget, in
     return surface;
 }
 
-RenderTarget *TextureStorage9_Cube::getRenderTarget(GLenum faceTarget)
+RenderTarget *TextureStorage9_Cube::getRenderTarget(const gl::ImageIndex &index)
 {
-    return mRenderTarget[gl::TextureCubeMap::faceIndex(faceTarget)];
+    return mRenderTarget[index.layerIndex];
 }
 
-void TextureStorage9_Cube::generateMipmap(int face, int level)
+void TextureStorage9_Cube::generateMipmaps()
 {
-    IDirect3DSurface9 *upper = getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level - 1, false);
-    IDirect3DSurface9 *lower = getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level, true);
+    // Base level must already be defined
 
-    if (upper != NULL && lower != NULL)
+    for (int faceIndex = 0; faceIndex < 6; faceIndex++)
     {
-        mRenderer->boxFilter(upper, lower);
-    }
+        for (int level = 1; level < getLevelCount(); level++)
+        {
+            IDirect3DSurface9 *upper = getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + faceIndex, level - 1, false);
+            IDirect3DSurface9 *lower = getCubeMapSurface(GL_TEXTURE_CUBE_MAP_POSITIVE_X + faceIndex, level, true);
 
-    if (upper != NULL) upper->Release();
-    if (lower != NULL) lower->Release();
+            if (upper != NULL && lower != NULL)
+            {
+                mRenderer->boxFilter(upper, lower);
+            }
+
+            SafeRelease(upper);
+            SafeRelease(lower);
+        }
+    }
 }
 
 IDirect3DBaseTexture9 *TextureStorage9_Cube::getBaseTexture() const
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/TextureStorage9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/TextureStorage9.h
index 86f551a131..e698c7dd56 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/TextureStorage9.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/TextureStorage9.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -11,7 +11,7 @@
 #ifndef LIBGLESV2_RENDERER_TEXTURESTORAGE9_H_
 #define LIBGLESV2_RENDERER_TEXTURESTORAGE9_H_
 
-#include "libGLESv2/renderer/TextureStorage.h"
+#include "libGLESv2/renderer/d3d/TextureStorage.h"
 #include "common/debug.h"
 
 namespace rx
@@ -20,37 +20,34 @@ class Renderer9;
 class SwapChain9;
 class RenderTarget;
 class RenderTarget9;
-class Blit;
 
 class TextureStorage9 : public TextureStorage
 {
   public:
-    TextureStorage9(Renderer *renderer, DWORD usage);
     virtual ~TextureStorage9();
 
     static TextureStorage9 *makeTextureStorage9(TextureStorage *storage);
 
-    static DWORD GetTextureUsage(D3DFORMAT d3dfmt, GLenum glusage, bool forceRenderable);
-    static bool IsTextureFormatRenderable(D3DFORMAT format);
+    static DWORD GetTextureUsage(GLenum internalformat, bool renderTarget);
 
     D3DPOOL getPool() const;
     DWORD getUsage() const;
 
     virtual IDirect3DBaseTexture9 *getBaseTexture() const = 0;
-    virtual RenderTarget *getRenderTarget() { return NULL; }
-    virtual RenderTarget *getRenderTarget(GLenum faceTarget) { return NULL; }
-    virtual void generateMipmap(int level) {};
-    virtual void generateMipmap(int face, int level) {};
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index) = 0;
+    virtual void generateMipmaps() = 0;
 
-    virtual int getLodOffset() const;
+    virtual int getTopLevel() const;
     virtual bool isRenderTarget() const;
     virtual bool isManaged() const;
-    virtual int levelCount();
+    virtual int getLevelCount() const;
 
   protected:
-    int mLodOffset;
+    int mTopLevel;
     Renderer9 *mRenderer;
 
+    TextureStorage9(Renderer *renderer, DWORD usage);
+
   private:
     DISALLOW_COPY_AND_ASSIGN(TextureStorage9);
 
@@ -62,15 +59,15 @@ class TextureStorage9_2D : public TextureStorage9
 {
   public:
     TextureStorage9_2D(Renderer *renderer, SwapChain9 *swapchain);
-    TextureStorage9_2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height);
+    TextureStorage9_2D(Renderer *renderer, GLenum internalformat, bool renderTarget, GLsizei width, GLsizei height, int levels);
     virtual ~TextureStorage9_2D();
 
     static TextureStorage9_2D *makeTextureStorage9_2D(TextureStorage *storage);
 
     IDirect3DSurface9 *getSurfaceLevel(int level, bool dirty);
-    virtual RenderTarget *getRenderTarget();
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
     virtual IDirect3DBaseTexture9 *getBaseTexture() const;
-    virtual void generateMipmap(int level);
+    virtual void generateMipmaps();
 
   private:
     DISALLOW_COPY_AND_ASSIGN(TextureStorage9_2D);
@@ -84,15 +81,15 @@ class TextureStorage9_2D : public TextureStorage9
 class TextureStorage9_Cube : public TextureStorage9
 {
   public:
-    TextureStorage9_Cube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size);
+    TextureStorage9_Cube(Renderer *renderer, GLenum internalformat, bool renderTarget, int size, int levels);
     virtual ~TextureStorage9_Cube();
 
     static TextureStorage9_Cube *makeTextureStorage9_Cube(TextureStorage *storage);
 
     IDirect3DSurface9 *getCubeMapSurface(GLenum faceTarget, int level, bool dirty);
-    virtual RenderTarget *getRenderTarget(GLenum faceTarget);
+    virtual RenderTarget *getRenderTarget(const gl::ImageIndex &index);
     virtual IDirect3DBaseTexture9 *getBaseTexture() const;
-    virtual void generateMipmap(int face, int level);
+    virtual void generateMipmaps();
 
   private:
     DISALLOW_COPY_AND_ASSIGN(TextureStorage9_Cube);
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexArray9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexArray9.h
new file mode 100644
index 0000000000..66a6c64d81
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexArray9.h
@@ -0,0 +1,43 @@
+//
+// Copyright 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexArray9.h: Defines the rx::VertexArray9 class which implements rx::VertexArrayImpl.
+
+#ifndef LIBGLESV2_RENDERER_VERTEXARRAY9_H_
+#define LIBGLESV2_RENDERER_VERTEXARRAY9_H_
+
+#include "libGLESv2/renderer/VertexArrayImpl.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+
+namespace rx
+{
+class Renderer9;
+
+class VertexArray9 : public VertexArrayImpl
+{
+  public:
+    VertexArray9(rx::Renderer9 *renderer)
+        : VertexArrayImpl(),
+          mRenderer(renderer)
+    {
+    }
+
+    virtual ~VertexArray9() { }
+
+    virtual void setElementArrayBuffer(const gl::Buffer *buffer) { }
+    virtual void setAttribute(size_t idx, const gl::VertexAttribute &attr) { }
+    virtual void setAttributeDivisor(size_t idx, GLuint divisor) { }
+    virtual void enableAttribute(size_t idx, bool enabledState) { }
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(VertexArray9);
+
+    rx::Renderer9 *mRenderer;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_VERTEXARRAY9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.cpp
new file mode 100644
index 0000000000..4cf7779118
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.cpp
@@ -0,0 +1,233 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexBuffer9.cpp: Defines the D3D9 VertexBuffer implementation.
+
+#include "libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/vertexconversion.h"
+#include "libGLESv2/renderer/BufferImpl.h"
+#include "libGLESv2/VertexAttribute.h"
+#include "libGLESv2/Buffer.h"
+
+namespace rx
+{
+
+VertexBuffer9::VertexBuffer9(rx::Renderer9 *renderer) : mRenderer(renderer)
+{
+    mVertexBuffer = NULL;
+    mBufferSize = 0;
+    mDynamicUsage = false;
+}
+
+VertexBuffer9::~VertexBuffer9()
+{
+    SafeRelease(mVertexBuffer);
+}
+
+gl::Error VertexBuffer9::initialize(unsigned int size, bool dynamicUsage)
+{
+    SafeRelease(mVertexBuffer);
+
+    updateSerial();
+
+    if (size > 0)
+    {
+        DWORD flags = D3DUSAGE_WRITEONLY;
+        if (dynamicUsage)
+        {
+            flags |= D3DUSAGE_DYNAMIC;
+        }
+
+        HRESULT result = mRenderer->createVertexBuffer(size, flags, &mVertexBuffer);
+
+        if (FAILED(result))
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "Failed to allocate internal vertex buffer of size, %lu.", size);
+        }
+    }
+
+    mBufferSize = size;
+    mDynamicUsage = dynamicUsage;
+    return gl::Error(GL_NO_ERROR);
+}
+
+VertexBuffer9 *VertexBuffer9::makeVertexBuffer9(VertexBuffer *vertexBuffer)
+{
+    ASSERT(HAS_DYNAMIC_TYPE(VertexBuffer9*, vertexBuffer));
+    return static_cast<VertexBuffer9*>(vertexBuffer);
+}
+
+gl::Error VertexBuffer9::storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                               GLint start, GLsizei count, GLsizei instances, unsigned int offset)
+{
+    if (!mVertexBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal vertex buffer is not initialized.");
+    }
+
+    gl::Buffer *buffer = attrib.buffer.get();
+
+    int inputStride = gl::ComputeVertexAttributeStride(attrib);
+    int elementSize = gl::ComputeVertexAttributeTypeSize(attrib);
+
+    DWORD lockFlags = mDynamicUsage ? D3DLOCK_NOOVERWRITE : 0;
+
+    uint8_t *mapPtr = NULL;
+
+    unsigned int mapSize;
+    gl::Error error = spaceRequired(attrib, count, instances, &mapSize);
+    if (error.isError())
+    {
+        return error;
+    }
+
+    HRESULT result = mVertexBuffer->Lock(offset, mapSize, reinterpret_cast<void**>(&mapPtr), lockFlags);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to lock internal vertex buffer, HRESULT: 0x%08x.", result);
+    }
+
+    const uint8_t *input = NULL;
+    if (attrib.enabled)
+    {
+        if (buffer)
+        {
+            BufferImpl *storage = buffer->getImplementation();
+            input = static_cast<const uint8_t*>(storage->getData()) + static_cast<int>(attrib.offset);
+        }
+        else
+        {
+            input = static_cast<const uint8_t*>(attrib.pointer);
+        }
+    }
+    else
+    {
+        input = reinterpret_cast<const uint8_t*>(currentValue.FloatValues);
+    }
+
+    if (instances == 0 || attrib.divisor == 0)
+    {
+        input += inputStride * start;
+    }
+
+    gl::VertexFormat vertexFormat(attrib, currentValue.Type);
+    const d3d9::VertexFormat &d3dVertexInfo = d3d9::GetVertexFormatInfo(mRenderer->getCapsDeclTypes(), vertexFormat);
+    bool needsConversion = (d3dVertexInfo.conversionType & VERTEX_CONVERT_CPU) > 0;
+
+    if (!needsConversion && inputStride == elementSize)
+    {
+        size_t copySize = static_cast<size_t>(count) * static_cast<size_t>(inputStride);
+        memcpy(mapPtr, input, copySize);
+    }
+    else
+    {
+        d3dVertexInfo.copyFunction(input, inputStride, count, mapPtr);
+    }
+
+    mVertexBuffer->Unlock();
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+gl::Error VertexBuffer9::getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances,
+                                          unsigned int *outSpaceRequired) const
+{
+    return spaceRequired(attrib, count, instances, outSpaceRequired);
+}
+
+unsigned int VertexBuffer9::getBufferSize() const
+{
+    return mBufferSize;
+}
+
+gl::Error VertexBuffer9::setBufferSize(unsigned int size)
+{
+    if (size > mBufferSize)
+    {
+        return initialize(size, mDynamicUsage);
+    }
+    else
+    {
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+gl::Error VertexBuffer9::discard()
+{
+    if (!mVertexBuffer)
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Internal vertex buffer is not initialized.");
+    }
+
+    void *dummy;
+    HRESULT result;
+
+    result = mVertexBuffer->Lock(0, 1, &dummy, D3DLOCK_DISCARD);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to lock internal buffer for discarding, HRESULT: 0x%08x", result);
+    }
+
+    result = mVertexBuffer->Unlock();
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to unlock internal buffer for discarding, HRESULT: 0x%08x", result);
+    }
+
+    return gl::Error(GL_NO_ERROR);
+}
+
+IDirect3DVertexBuffer9 * VertexBuffer9::getBuffer() const
+{
+    return mVertexBuffer;
+}
+
+gl::Error VertexBuffer9::spaceRequired(const gl::VertexAttribute &attrib, std::size_t count, GLsizei instances,
+                                       unsigned int *outSpaceRequired) const
+{
+    gl::VertexFormat vertexFormat(attrib, GL_FLOAT);
+    const d3d9::VertexFormat &d3d9VertexInfo = d3d9::GetVertexFormatInfo(mRenderer->getCapsDeclTypes(), vertexFormat);
+
+    if (attrib.enabled)
+    {
+        unsigned int elementCount = 0;
+        if (instances == 0 || attrib.divisor == 0)
+        {
+            elementCount = count;
+        }
+        else
+        {
+            // Round up to divisor, if possible
+            elementCount = rx::UnsignedCeilDivide(static_cast<unsigned int>(instances), attrib.divisor);
+        }
+
+        if (d3d9VertexInfo.outputElementSize <= std::numeric_limits<unsigned int>::max() / elementCount)
+        {
+            if (outSpaceRequired)
+            {
+                *outSpaceRequired = d3d9VertexInfo.outputElementSize * elementCount;
+            }
+            return gl::Error(GL_NO_ERROR);
+        }
+        else
+        {
+            return gl::Error(GL_OUT_OF_MEMORY, "New vertex buffer size would result in an overflow.");
+        }
+    }
+    else
+    {
+        const unsigned int elementSize = 4;
+        if (outSpaceRequired)
+        {
+            *outSpaceRequired = elementSize * 4;
+        }
+        return gl::Error(GL_NO_ERROR);
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h
new file mode 100644
index 0000000000..bdcf4bb64a
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h
@@ -0,0 +1,54 @@
+//
+// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// VertexBuffer9.h: Defines the D3D9 VertexBuffer implementation.
+
+#ifndef LIBGLESV2_RENDERER_VERTEXBUFFER9_H_
+#define LIBGLESV2_RENDERER_VERTEXBUFFER9_H_
+
+#include "libGLESv2/renderer/d3d/VertexBuffer.h"
+
+namespace rx
+{
+class Renderer9;
+
+class VertexBuffer9 : public VertexBuffer
+{
+  public:
+    explicit VertexBuffer9(rx::Renderer9 *renderer);
+    virtual ~VertexBuffer9();
+
+    virtual gl::Error initialize(unsigned int size, bool dynamicUsage);
+
+    static VertexBuffer9 *makeVertexBuffer9(VertexBuffer *vertexBuffer);
+
+    virtual gl::Error storeVertexAttributes(const gl::VertexAttribute &attrib, const gl::VertexAttribCurrentValueData &currentValue,
+                                            GLint start, GLsizei count, GLsizei instances, unsigned int offset);
+
+    virtual gl::Error getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances, unsigned int *outSpaceRequired) const;
+
+    virtual unsigned int getBufferSize() const;
+    virtual gl::Error setBufferSize(unsigned int size);
+    virtual gl::Error discard();
+
+    IDirect3DVertexBuffer9 *getBuffer() const;
+
+  private:
+    DISALLOW_COPY_AND_ASSIGN(VertexBuffer9);
+
+    rx::Renderer9 *mRenderer;
+
+    IDirect3DVertexBuffer9 *mVertexBuffer;
+    unsigned int mBufferSize;
+    bool mDynamicUsage;
+
+    gl::Error spaceRequired(const gl::VertexAttribute &attrib, std::size_t count, GLsizei instances,
+                            unsigned int *outSpaceRequired) const;
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_VERTEXBUFFER9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexDeclarationCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.cpp
index e5c8a14232..cefd786f11 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexDeclarationCache.cpp
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.cpp
@@ -1,4 +1,3 @@
-#include "precompiled.h"
 //
 // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
@@ -7,10 +6,11 @@
 
 // VertexDeclarationCache.cpp: Implements a helper class to construct and cache vertex declarations.
 
+#include "libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.h"
+#include "libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
 #include "libGLESv2/ProgramBinary.h"
-#include "libGLESv2/Context.h"
-#include "libGLESv2/renderer/d3d9/VertexBuffer9.h"
-#include "libGLESv2/renderer/d3d9/VertexDeclarationCache.h"
+#include "libGLESv2/VertexAttribute.h"
 
 namespace rx
 {
@@ -36,20 +36,31 @@ VertexDeclarationCache::~VertexDeclarationCache()
 {
     for (int i = 0; i < NUM_VERTEX_DECL_CACHE_ENTRIES; i++)
     {
-        if (mVertexDeclCache[i].vertexDeclaration)
-        {
-            mVertexDeclCache[i].vertexDeclaration->Release();
-        }
+        SafeRelease(mVertexDeclCache[i].vertexDeclaration);
     }
 }
 
-GLenum VertexDeclarationCache::applyDeclaration(IDirect3DDevice9 *device, TranslatedAttribute attributes[], gl::ProgramBinary *programBinary, GLsizei instances, GLsizei *repeatDraw)
+gl::Error VertexDeclarationCache::applyDeclaration(IDirect3DDevice9 *device, TranslatedAttribute attributes[], gl::ProgramBinary *programBinary, GLsizei instances, GLsizei *repeatDraw)
 {
     *repeatDraw = 1;
 
     int indexedAttribute = gl::MAX_VERTEX_ATTRIBS;
     int instancedAttribute = gl::MAX_VERTEX_ATTRIBS;
 
+    if (instances == 0)
+    {
+        for (int i = 0; i < gl::MAX_VERTEX_ATTRIBS; ++i)
+        {
+            if (attributes[i].divisor != 0)
+            {
+                // If a divisor is set, it still applies even if an instanced draw was not used, so treat
+                // as a single-instance draw.
+                instances = 1;
+                break;
+            }
+        }
+    }
+
     if (instances > 0)
     {
         // Find an indexed attribute to be mapped to D3D stream 0
@@ -70,12 +81,14 @@ GLenum VertexDeclarationCache::applyDeclaration(IDirect3DDevice9 *device, Transl
             }
         }
 
-        if (indexedAttribute == gl::MAX_VERTEX_ATTRIBS)
-        {
-            return GL_INVALID_OPERATION;
-        }
+        // The validation layer checks that there is at least one active attribute with a zero divisor as per
+        // the GL_ANGLE_instanced_arrays spec.
+        ASSERT(indexedAttribute != gl::MAX_VERTEX_ATTRIBS);
     }
 
+    D3DCAPS9 caps;
+    device->GetDeviceCaps(&caps);
+
     D3DVERTEXELEMENT9 elements[gl::MAX_VERTEX_ATTRIBS + 1];
     D3DVERTEXELEMENT9 *element = &elements[0];
 
@@ -134,9 +147,12 @@ GLenum VertexDeclarationCache::applyDeclaration(IDirect3DDevice9 *device, Transl
                 mAppliedVBs[stream].offset = attributes[i].offset;
             }
 
+            gl::VertexFormat vertexFormat(*attributes[i].attribute, GL_FLOAT);
+            const d3d9::VertexFormat &d3d9VertexInfo = d3d9::GetVertexFormatInfo(caps.DeclTypes, vertexFormat);
+
             element->Stream = stream;
             element->Offset = 0;
-            element->Type = attributes[i].attribute->mArrayEnabled ? vertexBuffer->getDeclType(*attributes[i].attribute) : D3DDECLTYPE_FLOAT4;
+            element->Type = d3d9VertexInfo.nativeFormat;
             element->Method = D3DDECLMETHOD_DEFAULT;
             element->Usage = D3DDECLUSAGE_TEXCOORD;
             element->UsageIndex = programBinary->getSemanticIndex(i);
@@ -172,7 +188,7 @@ GLenum VertexDeclarationCache::applyDeclaration(IDirect3DDevice9 *device, Transl
                 mLastSetVDecl = entry->vertexDeclaration;
             }
 
-            return GL_NO_ERROR;
+            return gl::Error(GL_NO_ERROR);
         }
     }
 
@@ -188,19 +204,23 @@ GLenum VertexDeclarationCache::applyDeclaration(IDirect3DDevice9 *device, Transl
 
     if (lastCache->vertexDeclaration != NULL)
     {
-        lastCache->vertexDeclaration->Release();
-        lastCache->vertexDeclaration = NULL;
+        SafeRelease(lastCache->vertexDeclaration);
         // mLastSetVDecl is set to the replacement, so we don't have to worry
         // about it.
     }
 
     memcpy(lastCache->cachedElements, elements, (element - elements) * sizeof(D3DVERTEXELEMENT9));
-    device->CreateVertexDeclaration(elements, &lastCache->vertexDeclaration);
+    HRESULT result = device->CreateVertexDeclaration(elements, &lastCache->vertexDeclaration);
+    if (FAILED(result))
+    {
+        return gl::Error(GL_OUT_OF_MEMORY, "Failed to create internal vertex declaration, result: 0x%X.", result);
+    }
+
     device->SetVertexDeclaration(lastCache->vertexDeclaration);
     mLastSetVDecl = lastCache->vertexDeclaration;
     lastCache->lruCount = ++mMaxLru;
 
-    return GL_NO_ERROR;
+    return gl::Error(GL_NO_ERROR);
 }
 
 void VertexDeclarationCache::markStateDirty()
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexDeclarationCache.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.h
index 3fc024a9ba..9af36e0d7a 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexDeclarationCache.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.h
@@ -9,7 +9,8 @@
 #ifndef LIBGLESV2_RENDERER_VERTEXDECLARATIONCACHE_H_
 #define LIBGLESV2_RENDERER_VERTEXDECLARATIONCACHE_H_
 
-#include "libGLESv2/renderer/VertexDataManager.h"
+#include "libGLESv2/Error.h"
+#include "libGLESv2/renderer/d3d/VertexDataManager.h"
 
 namespace gl
 {
@@ -25,7 +26,7 @@ class VertexDeclarationCache
     VertexDeclarationCache();
     ~VertexDeclarationCache();
 
-    GLenum applyDeclaration(IDirect3DDevice9 *device, TranslatedAttribute attributes[], gl::ProgramBinary *programBinary, GLsizei instances, GLsizei *repeatDraw);
+    gl::Error applyDeclaration(IDirect3DDevice9 *device, TranslatedAttribute attributes[], gl::ProgramBinary *programBinary, GLsizei instances, GLsizei *repeatDraw);
 
     void markStateDirty();
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/formatutils9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/formatutils9.cpp
new file mode 100644
index 0000000000..f3acaf7987
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/formatutils9.cpp
@@ -0,0 +1,588 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// formatutils9.cpp: Queries for GL image formats and their translations to D3D9
+// formats.
+
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/renderer/d3d/d3d9/Renderer9.h"
+#include "libGLESv2/renderer/generatemip.h"
+#include "libGLESv2/renderer/loadimage.h"
+#include "libGLESv2/renderer/copyimage.h"
+#include "libGLESv2/renderer/vertexconversion.h"
+
+namespace rx
+{
+
+namespace d3d9
+{
+
+const D3DFORMAT D3DFMT_INTZ = ((D3DFORMAT)(MAKEFOURCC('I', 'N', 'T', 'Z')));
+const D3DFORMAT D3DFMT_NULL = ((D3DFORMAT)(MAKEFOURCC('N', 'U', 'L', 'L')));
+
+struct D3D9FastCopyFormat
+{
+    GLenum destFormat;
+    GLenum destType;
+    ColorCopyFunction copyFunction;
+
+    D3D9FastCopyFormat(GLenum destFormat, GLenum destType, ColorCopyFunction copyFunction)
+        : destFormat(destFormat), destType(destType), copyFunction(copyFunction)
+    { }
+
+    bool operator<(const D3D9FastCopyFormat& other) const
+    {
+        return memcmp(this, &other, sizeof(D3D9FastCopyFormat)) < 0;
+    }
+};
+
+typedef std::multimap<D3DFORMAT, D3D9FastCopyFormat> D3D9FastCopyMap;
+
+static D3D9FastCopyMap BuildFastCopyMap()
+{
+    D3D9FastCopyMap map;
+
+    map.insert(std::make_pair(D3DFMT_A8R8G8B8, D3D9FastCopyFormat(GL_RGBA, GL_UNSIGNED_BYTE, CopyBGRA8ToRGBA8)));
+
+    return map;
+}
+
+// A map to determine the pixel size and mip generation function of a given D3D format
+typedef std::map<D3DFORMAT, D3DFormat> D3D9FormatInfoMap;
+
+D3DFormat::D3DFormat()
+    : pixelBytes(0),
+      blockWidth(0),
+      blockHeight(0),
+      internalFormat(GL_NONE),
+      mipGenerationFunction(NULL),
+      colorReadFunction(NULL),
+      fastCopyFunctions()
+{
+}
+
+ColorCopyFunction D3DFormat::getFastCopyFunction(GLenum format, GLenum type) const
+{
+    FastCopyFunctionMap::const_iterator iter = fastCopyFunctions.find(std::make_pair(format, type));
+    return (iter != fastCopyFunctions.end()) ? iter->second : NULL;
+}
+
+static inline void InsertD3DFormatInfo(D3D9FormatInfoMap *map, D3DFORMAT format, GLuint bits, GLuint blockWidth,
+                                       GLuint blockHeight, GLenum internalFormat, MipGenerationFunction mipFunc,
+                                       ColorReadFunction colorReadFunc)
+{
+    D3DFormat info;
+    info.pixelBytes = bits / 8;
+    info.blockWidth = blockWidth;
+    info.blockHeight = blockHeight;
+    info.internalFormat = internalFormat;
+    info.mipGenerationFunction = mipFunc;
+    info.colorReadFunction = colorReadFunc;
+
+    static const D3D9FastCopyMap fastCopyMap = BuildFastCopyMap();
+    std::pair<D3D9FastCopyMap::const_iterator, D3D9FastCopyMap::const_iterator> fastCopyIter = fastCopyMap.equal_range(format);
+    for (D3D9FastCopyMap::const_iterator i = fastCopyIter.first; i != fastCopyIter.second; i++)
+    {
+        info.fastCopyFunctions.insert(std::make_pair(std::make_pair(i->second.destFormat, i->second.destType), i->second.copyFunction));
+    }
+
+    map->insert(std::make_pair(format, info));
+}
+
+static D3D9FormatInfoMap BuildD3D9FormatInfoMap()
+{
+    D3D9FormatInfoMap map;
+
+    //                       | D3DFORMAT           | S  |W |H | Internal format                   | Mip generation function   | Color read function             |
+    InsertD3DFormatInfo(&map, D3DFMT_NULL,            0, 0, 0, GL_NONE,                            NULL,                       NULL                             );
+    InsertD3DFormatInfo(&map, D3DFMT_UNKNOWN,         0, 0, 0, GL_NONE,                            NULL,                       NULL                             );
+
+    InsertD3DFormatInfo(&map, D3DFMT_L8,              8, 1, 1, GL_LUMINANCE8_EXT,                  GenerateMip<L8>,            ReadColor<L8, GLfloat>           );
+    InsertD3DFormatInfo(&map, D3DFMT_A8,              8, 1, 1, GL_ALPHA8_EXT,                      GenerateMip<A8>,            ReadColor<A8, GLfloat>           );
+    InsertD3DFormatInfo(&map, D3DFMT_A8L8,           16, 1, 1, GL_LUMINANCE8_ALPHA8_EXT,           GenerateMip<A8L8>,          ReadColor<A8L8, GLfloat>         );
+    InsertD3DFormatInfo(&map, D3DFMT_A4R4G4B4,       16, 1, 1, GL_BGRA4_ANGLEX,                    GenerateMip<B4G4R4A4>,      ReadColor<B4G4R4A4, GLfloat>     );
+    InsertD3DFormatInfo(&map, D3DFMT_A1R5G5B5,       16, 1, 1, GL_BGR5_A1_ANGLEX,                  GenerateMip<B5G5R5A1>,      ReadColor<B5G5R5A1, GLfloat>     );
+    InsertD3DFormatInfo(&map, D3DFMT_R5G6B5,         16, 1, 1, GL_RGB565,                          GenerateMip<R5G6B5>,        ReadColor<R5G6B5, GLfloat>       );
+    InsertD3DFormatInfo(&map, D3DFMT_X8R8G8B8,       32, 1, 1, GL_BGRA8_EXT,                       GenerateMip<B8G8R8X8>,      ReadColor<B8G8R8X8, GLfloat>     );
+    InsertD3DFormatInfo(&map, D3DFMT_A8R8G8B8,       32, 1, 1, GL_BGRA8_EXT,                       GenerateMip<B8G8R8A8>,      ReadColor<B8G8R8A8, GLfloat>     );
+    InsertD3DFormatInfo(&map, D3DFMT_R16F,           16, 1, 1, GL_R16F_EXT,                        GenerateMip<R16F>,          ReadColor<R16F, GLfloat>         );
+    InsertD3DFormatInfo(&map, D3DFMT_G16R16F,        32, 1, 1, GL_RG16F_EXT,                       GenerateMip<R16G16F>,       ReadColor<R16G16F, GLfloat>      );
+    InsertD3DFormatInfo(&map, D3DFMT_A16B16G16R16F,  64, 1, 1, GL_RGBA16F_EXT,                     GenerateMip<R16G16B16A16F>, ReadColor<R16G16B16A16F, GLfloat>);
+    InsertD3DFormatInfo(&map, D3DFMT_R32F,           32, 1, 1, GL_R32F_EXT,                        GenerateMip<R32F>,          ReadColor<R32F, GLfloat>         );
+    InsertD3DFormatInfo(&map, D3DFMT_G32R32F,        64, 1, 1, GL_RG32F_EXT,                       GenerateMip<R32G32F>,       ReadColor<R32G32F, GLfloat>      );
+    InsertD3DFormatInfo(&map, D3DFMT_A32B32G32R32F, 128, 1, 1, GL_RGBA32F_EXT,                     GenerateMip<R32G32B32A32F>, ReadColor<R32G32B32A32F, GLfloat>);
+
+    InsertD3DFormatInfo(&map, D3DFMT_D16,            16, 1, 1, GL_DEPTH_COMPONENT16,               NULL,                       NULL                             );
+    InsertD3DFormatInfo(&map, D3DFMT_D24S8,          32, 1, 1, GL_DEPTH24_STENCIL8_OES,            NULL,                       NULL                             );
+    InsertD3DFormatInfo(&map, D3DFMT_D24X8,          32, 1, 1, GL_DEPTH_COMPONENT16,               NULL,                       NULL                             );
+    InsertD3DFormatInfo(&map, D3DFMT_D32,            32, 1, 1, GL_DEPTH_COMPONENT32_OES,           NULL,                       NULL                             );
+
+    InsertD3DFormatInfo(&map, D3DFMT_INTZ,           32, 1, 1, GL_DEPTH24_STENCIL8_OES,            NULL,                       NULL                             );
+
+    InsertD3DFormatInfo(&map, D3DFMT_DXT1,           64, 4, 4, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,   NULL,                       NULL                             );
+    InsertD3DFormatInfo(&map, D3DFMT_DXT3,          128, 4, 4, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE, NULL,                       NULL                             );
+    InsertD3DFormatInfo(&map, D3DFMT_DXT5,          128, 4, 4, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE, NULL,                       NULL                             );
+
+    return map;
+}
+
+const D3DFormat &GetD3DFormatInfo(D3DFORMAT format)
+{
+    static const D3D9FormatInfoMap infoMap = BuildD3D9FormatInfoMap();
+    D3D9FormatInfoMap::const_iterator iter = infoMap.find(format);
+    if (iter != infoMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const D3DFormat defaultInfo;
+        return defaultInfo;
+    }
+}
+
+
+
+typedef std::pair<GLint, InitializeTextureDataFunction> InternalFormatInitialzerPair;
+typedef std::map<GLint, InitializeTextureDataFunction> InternalFormatInitialzerMap;
+
+static InternalFormatInitialzerMap BuildInternalFormatInitialzerMap()
+{
+    InternalFormatInitialzerMap map;
+
+    map.insert(InternalFormatInitialzerPair(GL_RGB16F, Initialize4ComponentData<GLhalf,   0x0000,     0x0000,     0x0000,     gl::Float16One>));
+    map.insert(InternalFormatInitialzerPair(GL_RGB32F, Initialize4ComponentData<GLfloat,  0x00000000, 0x00000000, 0x00000000, gl::Float32One>));
+
+    return map;
+}
+
+// Each GL internal format corresponds to one D3D format and data loading function.
+// Due to not all formats being available all the time, some of the function/format types are wrapped
+// in templates that perform format support queries on a Renderer9 object which is supplied
+// when requesting the function or format.
+
+typedef bool(*FallbackPredicateFunction)();
+
+template <FallbackPredicateFunction pred, LoadImageFunction prefered, LoadImageFunction fallback>
+static void FallbackLoad(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    if (pred())
+    {
+        prefered(width, height, depth, input, inputRowPitch, inputDepthPitch, output, outputRowPitch, outputDepthPitch);
+    }
+    else
+    {
+        fallback(width, height, depth, input, inputRowPitch, inputDepthPitch, output, outputRowPitch, outputDepthPitch);
+    }
+}
+
+static void UnreachableLoad(size_t width, size_t height, size_t depth,
+                            const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                            uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    UNREACHABLE();
+}
+
+typedef std::pair<GLenum, TextureFormat> D3D9FormatPair;
+typedef std::map<GLenum, TextureFormat> D3D9FormatMap;
+
+TextureFormat::TextureFormat()
+    : texFormat(D3DFMT_NULL),
+      renderFormat(D3DFMT_NULL),
+      dataInitializerFunction(NULL),
+      loadFunction(UnreachableLoad)
+{
+}
+
+static inline void InsertD3D9FormatInfo(D3D9FormatMap *map, GLenum internalFormat, D3DFORMAT texFormat,
+                                        D3DFORMAT renderFormat, LoadImageFunction loadFunction)
+{
+    TextureFormat info;
+    info.texFormat = texFormat;
+    info.renderFormat = renderFormat;
+
+    static const InternalFormatInitialzerMap dataInitializationMap = BuildInternalFormatInitialzerMap();
+    InternalFormatInitialzerMap::const_iterator dataInitIter = dataInitializationMap.find(internalFormat);
+    info.dataInitializerFunction = (dataInitIter != dataInitializationMap.end()) ? dataInitIter->second : NULL;
+
+    info.loadFunction = loadFunction;
+
+    map->insert(std::make_pair(internalFormat, info));
+}
+
+static D3D9FormatMap BuildD3D9FormatMap()
+{
+    D3D9FormatMap map;
+
+    //                       | Internal format                     | Texture format      | Render format        | Load function                           |
+    InsertD3D9FormatInfo(&map, GL_NONE,                             D3DFMT_NULL,          D3DFMT_NULL,           UnreachableLoad                          );
+
+    // We choose to downsample the GL_DEPTH_COMPONENT32_OES format to a 24-bit format because D3DFMT_D32 is not widely
+    // supported.  We're allowed to do this because:
+    //  - The ES spec 2.0.25 sec 3.7.1 states that we're allowed to store texture formats with internal format
+    //    resolutions of our own choosing.
+    //  - OES_depth_texture states that downsampling of the depth formats is allowed.
+    //  - ANGLE_depth_texture does not state minimum required resolutions of the depth texture formats it
+    //    introduces.
+    // In ES3 however, there are minimum resolutions for the texture formats and this would not be allowed.
+
+    InsertD3D9FormatInfo(&map, GL_DEPTH_COMPONENT16,                D3DFMT_INTZ,          D3DFMT_D24S8,          UnreachableLoad                          );
+    InsertD3D9FormatInfo(&map, GL_DEPTH_COMPONENT32_OES,            D3DFMT_INTZ,          D3DFMT_D24X8,          UnreachableLoad                          );
+    InsertD3D9FormatInfo(&map, GL_DEPTH24_STENCIL8_OES,             D3DFMT_INTZ,          D3DFMT_D24S8,          UnreachableLoad                          );
+    InsertD3D9FormatInfo(&map, GL_STENCIL_INDEX8,                   D3DFMT_UNKNOWN,       D3DFMT_D24S8,          UnreachableLoad                          ); // TODO: What's the texture format?
+
+    InsertD3D9FormatInfo(&map, GL_RGBA32F_EXT,                      D3DFMT_A32B32G32R32F, D3DFMT_A32B32G32R32F,  LoadToNative<GLfloat, 4>                 );
+    InsertD3D9FormatInfo(&map, GL_RGB32F_EXT,                       D3DFMT_A32B32G32R32F, D3DFMT_A32B32G32R32F,  LoadToNative3To4<GLfloat, gl::Float32One>);
+    InsertD3D9FormatInfo(&map, GL_RG32F_EXT,                        D3DFMT_G32R32F,       D3DFMT_G32R32F,        LoadToNative<GLfloat, 2>                 );
+    InsertD3D9FormatInfo(&map, GL_R32F_EXT,                         D3DFMT_R32F,          D3DFMT_R32F,           LoadToNative<GLfloat, 1>                 );
+    InsertD3D9FormatInfo(&map, GL_ALPHA32F_EXT,                     D3DFMT_A32B32G32R32F, D3DFMT_UNKNOWN,        LoadA32FToRGBA32F                        );
+    InsertD3D9FormatInfo(&map, GL_LUMINANCE32F_EXT,                 D3DFMT_A32B32G32R32F, D3DFMT_UNKNOWN,        LoadL32FToRGBA32F                        );
+    InsertD3D9FormatInfo(&map, GL_LUMINANCE_ALPHA32F_EXT,           D3DFMT_A32B32G32R32F, D3DFMT_UNKNOWN,        LoadLA32FToRGBA32F                       );
+
+    InsertD3D9FormatInfo(&map, GL_RGBA16F_EXT,                      D3DFMT_A16B16G16R16F, D3DFMT_A16B16G16R16F,  LoadToNative<GLhalf, 4>                  );
+    InsertD3D9FormatInfo(&map, GL_RGB16F_EXT,                       D3DFMT_A16B16G16R16F, D3DFMT_A16B16G16R16F,  LoadToNative3To4<GLhalf, gl::Float16One> );
+    InsertD3D9FormatInfo(&map, GL_RG16F_EXT,                        D3DFMT_G16R16F,       D3DFMT_G16R16F,        LoadToNative<GLhalf, 2>                  );
+    InsertD3D9FormatInfo(&map, GL_R16F_EXT,                         D3DFMT_R16F,          D3DFMT_R16F,           LoadToNative<GLhalf, 1>                  );
+    InsertD3D9FormatInfo(&map, GL_ALPHA16F_EXT,                     D3DFMT_A16B16G16R16F, D3DFMT_UNKNOWN,        LoadA16FToRGBA16F                        );
+    InsertD3D9FormatInfo(&map, GL_LUMINANCE16F_EXT,                 D3DFMT_A16B16G16R16F, D3DFMT_UNKNOWN,        LoadL16FToRGBA16F                        );
+    InsertD3D9FormatInfo(&map, GL_LUMINANCE_ALPHA16F_EXT,           D3DFMT_A16B16G16R16F, D3DFMT_UNKNOWN,        LoadLA16FToRGBA16F                       );
+
+    InsertD3D9FormatInfo(&map, GL_ALPHA8_EXT,                       D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       FallbackLoad<gl::supportsSSE2, LoadA8ToBGRA8_SSE2, LoadA8ToBGRA8>);
+
+    InsertD3D9FormatInfo(&map, GL_RGB8_OES,                         D3DFMT_X8R8G8B8,      D3DFMT_X8R8G8B8,       LoadRGB8ToBGRX8                           );
+    InsertD3D9FormatInfo(&map, GL_RGB565,                           D3DFMT_X8R8G8B8,      D3DFMT_X8R8G8B8,       LoadR5G6B5ToBGRA8                         );
+    InsertD3D9FormatInfo(&map, GL_RGBA8_OES,                        D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       FallbackLoad<gl::supportsSSE2, LoadRGBA8ToBGRA8_SSE2, LoadRGBA8ToBGRA8>);
+    InsertD3D9FormatInfo(&map, GL_RGBA4,                            D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       LoadRGBA4ToBGRA8                          );
+    InsertD3D9FormatInfo(&map, GL_RGB5_A1,                          D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       LoadRGB5A1ToBGRA8                         );
+    InsertD3D9FormatInfo(&map, GL_R8_EXT,                           D3DFMT_X8R8G8B8,      D3DFMT_X8R8G8B8,       LoadR8ToBGRX8                             );
+    InsertD3D9FormatInfo(&map, GL_RG8_EXT,                          D3DFMT_X8R8G8B8,      D3DFMT_X8R8G8B8,       LoadRG8ToBGRX8                            );
+
+    InsertD3D9FormatInfo(&map, GL_BGRA8_EXT,                        D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       LoadToNative<GLubyte, 4>                  );
+    InsertD3D9FormatInfo(&map, GL_BGRA4_ANGLEX,                     D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       LoadBGRA4ToBGRA8                          );
+    InsertD3D9FormatInfo(&map, GL_BGR5_A1_ANGLEX,                   D3DFMT_A8R8G8B8,      D3DFMT_A8R8G8B8,       LoadBGR5A1ToBGRA8                         );
+
+    InsertD3D9FormatInfo(&map, GL_COMPRESSED_RGB_S3TC_DXT1_EXT,     D3DFMT_DXT1,          D3DFMT_UNKNOWN,        LoadCompressedToNative<4, 4,  8>          );
+    InsertD3D9FormatInfo(&map, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,    D3DFMT_DXT1,          D3DFMT_UNKNOWN,        LoadCompressedToNative<4, 4,  8>          );
+    InsertD3D9FormatInfo(&map, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE,  D3DFMT_DXT3,          D3DFMT_UNKNOWN,        LoadCompressedToNative<4, 4, 16>          );
+    InsertD3D9FormatInfo(&map, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE,  D3DFMT_DXT5,          D3DFMT_UNKNOWN,        LoadCompressedToNative<4, 4, 16>          );
+
+    // These formats require checking if the renderer supports D3DFMT_L8 or D3DFMT_A8L8 and
+    // then changing the format and loading function appropriately.
+    InsertD3D9FormatInfo(&map, GL_LUMINANCE8_EXT,                   D3DFMT_L8,            D3DFMT_UNKNOWN,        LoadToNative<GLubyte, 1>                  );
+    InsertD3D9FormatInfo(&map, GL_LUMINANCE8_ALPHA8_EXT,            D3DFMT_A8L8,          D3DFMT_UNKNOWN,        LoadToNative<GLubyte, 2>                  );
+
+    return map;
+}
+
+const TextureFormat &GetTextureFormatInfo(GLenum internalFormat)
+{
+    static const D3D9FormatMap formatMap = BuildD3D9FormatMap();
+    D3D9FormatMap::const_iterator iter = formatMap.find(internalFormat);
+    if (iter != formatMap.end())
+    {
+        return iter->second;
+    }
+    else
+    {
+        static const TextureFormat defaultInfo;
+        return defaultInfo;
+    }
+}
+
+static GLenum GetDeclTypeComponentType(D3DDECLTYPE declType)
+{
+    switch (declType)
+    {
+      case D3DDECLTYPE_FLOAT1:   return GL_FLOAT;
+      case D3DDECLTYPE_FLOAT2:   return GL_FLOAT;
+      case D3DDECLTYPE_FLOAT3:   return GL_FLOAT;
+      case D3DDECLTYPE_FLOAT4:   return GL_FLOAT;
+      case D3DDECLTYPE_UBYTE4:   return GL_UNSIGNED_INT;
+      case D3DDECLTYPE_SHORT2:   return GL_INT;
+      case D3DDECLTYPE_SHORT4:   return GL_INT;
+      case D3DDECLTYPE_UBYTE4N:  return GL_UNSIGNED_NORMALIZED;
+      case D3DDECLTYPE_SHORT4N:  return GL_SIGNED_NORMALIZED;
+      case D3DDECLTYPE_USHORT4N: return GL_UNSIGNED_NORMALIZED;
+      case D3DDECLTYPE_SHORT2N:  return GL_SIGNED_NORMALIZED;
+      case D3DDECLTYPE_USHORT2N: return GL_UNSIGNED_NORMALIZED;
+      default: UNREACHABLE();    return GL_NONE;
+    }
+}
+
+// Attribute format conversion
+enum { NUM_GL_VERTEX_ATTRIB_TYPES = 6 };
+
+struct TranslationDescription
+{
+    DWORD capsFlag;
+    VertexFormat preferredConversion;
+    VertexFormat fallbackConversion;
+};
+
+// Mapping from OpenGL-ES vertex attrib type to D3D decl type:
+//
+// BYTE                 SHORT (Cast)
+// BYTE-norm            FLOAT (Normalize) (can't be exactly represented as SHORT-norm)
+// UNSIGNED_BYTE        UBYTE4 (Identity) or SHORT (Cast)
+// UNSIGNED_BYTE-norm   UBYTE4N (Identity) or FLOAT (Normalize)
+// SHORT                SHORT (Identity)
+// SHORT-norm           SHORT-norm (Identity) or FLOAT (Normalize)
+// UNSIGNED_SHORT       FLOAT (Cast)
+// UNSIGNED_SHORT-norm  USHORT-norm (Identity) or FLOAT (Normalize)
+// FIXED (not in WebGL) FLOAT (FixedToFloat)
+// FLOAT                FLOAT (Identity)
+
+// GLToCType maps from GL type (as GLenum) to the C typedef.
+template <GLenum GLType> struct GLToCType { };
+
+template <> struct GLToCType<GL_BYTE>           { typedef GLbyte type;      };
+template <> struct GLToCType<GL_UNSIGNED_BYTE>  { typedef GLubyte type;     };
+template <> struct GLToCType<GL_SHORT>          { typedef GLshort type;     };
+template <> struct GLToCType<GL_UNSIGNED_SHORT> { typedef GLushort type;    };
+template <> struct GLToCType<GL_FIXED>          { typedef GLuint type;      };
+template <> struct GLToCType<GL_FLOAT>          { typedef GLfloat type;     };
+
+// This differs from D3DDECLTYPE in that it is unsized. (Size expansion is applied last.)
+enum D3DVertexType
+{
+    D3DVT_FLOAT,
+    D3DVT_SHORT,
+    D3DVT_SHORT_NORM,
+    D3DVT_UBYTE,
+    D3DVT_UBYTE_NORM,
+    D3DVT_USHORT_NORM
+};
+
+// D3DToCType maps from D3D vertex type (as enum D3DVertexType) to the corresponding C type.
+template <unsigned int D3DType> struct D3DToCType { };
+
+template <> struct D3DToCType<D3DVT_FLOAT> { typedef float type; };
+template <> struct D3DToCType<D3DVT_SHORT> { typedef short type; };
+template <> struct D3DToCType<D3DVT_SHORT_NORM> { typedef short type; };
+template <> struct D3DToCType<D3DVT_UBYTE> { typedef unsigned char type; };
+template <> struct D3DToCType<D3DVT_UBYTE_NORM> { typedef unsigned char type; };
+template <> struct D3DToCType<D3DVT_USHORT_NORM> { typedef unsigned short type; };
+
+// Encode the type/size combinations that D3D permits. For each type/size it expands to a widener that will provide the appropriate final size.
+template <unsigned int type, int size> struct WidenRule { };
+
+template <int size> struct WidenRule<D3DVT_FLOAT, size>          : NoWiden<size> { };
+template <int size> struct WidenRule<D3DVT_SHORT, size>          : WidenToEven<size> { };
+template <int size> struct WidenRule<D3DVT_SHORT_NORM, size>     : WidenToEven<size> { };
+template <int size> struct WidenRule<D3DVT_UBYTE, size>          : WidenToFour<size> { };
+template <int size> struct WidenRule<D3DVT_UBYTE_NORM, size>     : WidenToFour<size> { };
+template <int size> struct WidenRule<D3DVT_USHORT_NORM, size>    : WidenToEven<size> { };
+
+// VertexTypeFlags encodes the D3DCAPS9::DeclType flag and vertex declaration flag for each D3D vertex type & size combination.
+template <unsigned int d3dtype, int size> struct VertexTypeFlags { };
+
+template <unsigned int _capflag, unsigned int _declflag>
+struct VertexTypeFlagsHelper
+{
+    enum { capflag = _capflag };
+    enum { declflag = _declflag };
+};
+
+template <> struct VertexTypeFlags<D3DVT_FLOAT, 1> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT1> { };
+template <> struct VertexTypeFlags<D3DVT_FLOAT, 2> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT2> { };
+template <> struct VertexTypeFlags<D3DVT_FLOAT, 3> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT3> { };
+template <> struct VertexTypeFlags<D3DVT_FLOAT, 4> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT4> { };
+template <> struct VertexTypeFlags<D3DVT_SHORT, 2> : VertexTypeFlagsHelper<0, D3DDECLTYPE_SHORT2> { };
+template <> struct VertexTypeFlags<D3DVT_SHORT, 4> : VertexTypeFlagsHelper<0, D3DDECLTYPE_SHORT4> { };
+template <> struct VertexTypeFlags<D3DVT_SHORT_NORM, 2> : VertexTypeFlagsHelper<D3DDTCAPS_SHORT2N, D3DDECLTYPE_SHORT2N> { };
+template <> struct VertexTypeFlags<D3DVT_SHORT_NORM, 4> : VertexTypeFlagsHelper<D3DDTCAPS_SHORT4N, D3DDECLTYPE_SHORT4N> { };
+template <> struct VertexTypeFlags<D3DVT_UBYTE, 4> : VertexTypeFlagsHelper<D3DDTCAPS_UBYTE4, D3DDECLTYPE_UBYTE4> { };
+template <> struct VertexTypeFlags<D3DVT_UBYTE_NORM, 4> : VertexTypeFlagsHelper<D3DDTCAPS_UBYTE4N, D3DDECLTYPE_UBYTE4N> { };
+template <> struct VertexTypeFlags<D3DVT_USHORT_NORM, 2> : VertexTypeFlagsHelper<D3DDTCAPS_USHORT2N, D3DDECLTYPE_USHORT2N> { };
+template <> struct VertexTypeFlags<D3DVT_USHORT_NORM, 4> : VertexTypeFlagsHelper<D3DDTCAPS_USHORT4N, D3DDECLTYPE_USHORT4N> { };
+
+
+// VertexTypeMapping maps GL type & normalized flag to preferred and fallback D3D vertex types (as D3DVertexType enums).
+template <GLenum GLtype, bool normalized> struct VertexTypeMapping { };
+
+template <D3DVertexType Preferred, D3DVertexType Fallback = Preferred>
+struct VertexTypeMappingBase
+{
+    enum { preferred = Preferred };
+    enum { fallback = Fallback };
+};
+
+template <> struct VertexTypeMapping<GL_BYTE, false>                        : VertexTypeMappingBase<D3DVT_SHORT> { };                       // Cast
+template <> struct VertexTypeMapping<GL_BYTE, true>                         : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // Normalize
+template <> struct VertexTypeMapping<GL_UNSIGNED_BYTE, false>               : VertexTypeMappingBase<D3DVT_UBYTE, D3DVT_FLOAT> { };          // Identity, Cast
+template <> struct VertexTypeMapping<GL_UNSIGNED_BYTE, true>                : VertexTypeMappingBase<D3DVT_UBYTE_NORM, D3DVT_FLOAT> { };     // Identity, Normalize
+template <> struct VertexTypeMapping<GL_SHORT, false>                       : VertexTypeMappingBase<D3DVT_SHORT> { };                       // Identity
+template <> struct VertexTypeMapping<GL_SHORT, true>                        : VertexTypeMappingBase<D3DVT_SHORT_NORM, D3DVT_FLOAT> { };     // Cast, Normalize
+template <> struct VertexTypeMapping<GL_UNSIGNED_SHORT, false>              : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // Cast
+template <> struct VertexTypeMapping<GL_UNSIGNED_SHORT, true>               : VertexTypeMappingBase<D3DVT_USHORT_NORM, D3DVT_FLOAT> { };    // Cast, Normalize
+template <bool normalized> struct VertexTypeMapping<GL_FIXED, normalized>   : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // FixedToFloat
+template <bool normalized> struct VertexTypeMapping<GL_FLOAT, normalized>   : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // Identity
+
+
+// Given a GL type & norm flag and a D3D type, ConversionRule provides the type conversion rule (Cast, Normalize, Identity, FixedToFloat).
+// The conversion rules themselves are defined in vertexconversion.h.
+
+// Almost all cases are covered by Cast (including those that are actually Identity since Cast<T,T> knows it's an identity mapping).
+template <GLenum fromType, bool normalized, unsigned int toType>
+struct ConversionRule : Cast<typename GLToCType<fromType>::type, typename D3DToCType<toType>::type> { };
+
+// All conversions from normalized types to float use the Normalize operator.
+template <GLenum fromType> struct ConversionRule<fromType, true, D3DVT_FLOAT> : Normalize<typename GLToCType<fromType>::type> { };
+
+// Use a full specialization for this so that it preferentially matches ahead of the generic normalize-to-float rules.
+template <> struct ConversionRule<GL_FIXED, true, D3DVT_FLOAT>  : FixedToFloat<GLint, 16> { };
+template <> struct ConversionRule<GL_FIXED, false, D3DVT_FLOAT> : FixedToFloat<GLint, 16> { };
+
+// A 2-stage construction is used for DefaultVertexValues because float must use SimpleDefaultValues (i.e. 0/1)
+// whether it is normalized or not.
+template <class T, bool normalized> struct DefaultVertexValuesStage2 { };
+
+template <class T> struct DefaultVertexValuesStage2<T, true>  : NormalizedDefaultValues<T> { };
+template <class T> struct DefaultVertexValuesStage2<T, false> : SimpleDefaultValues<T> { };
+
+// Work out the default value rule for a D3D type (expressed as the C type) and
+template <class T, bool normalized> struct DefaultVertexValues : DefaultVertexValuesStage2<T, normalized> { };
+template <bool normalized> struct DefaultVertexValues<float, normalized> : SimpleDefaultValues<float> { };
+
+// Policy rules for use with Converter, to choose whether to use the preferred or fallback conversion.
+// The fallback conversion produces an output that all D3D9 devices must support.
+template <class T> struct UsePreferred { enum { type = T::preferred }; };
+template <class T> struct UseFallback { enum { type = T::fallback }; };
+
+// Converter ties it all together. Given an OpenGL type/norm/size and choice of preferred/fallback conversion,
+// it provides all the members of the appropriate VertexDataConverter, the D3DCAPS9::DeclTypes flag in cap flag
+// and the D3DDECLTYPE member needed for the vertex declaration in declflag.
+template <GLenum fromType, bool normalized, int size, template <class T> class PreferenceRule>
+struct Converter
+    : VertexDataConverter<typename GLToCType<fromType>::type,
+                          WidenRule<PreferenceRule< VertexTypeMapping<fromType, normalized> >::type, size>,
+                          ConversionRule<fromType,
+                                         normalized,
+                                         PreferenceRule< VertexTypeMapping<fromType, normalized> >::type>,
+                          DefaultVertexValues<typename D3DToCType<PreferenceRule< VertexTypeMapping<fromType, normalized> >::type>::type, normalized > >
+{
+private:
+    enum { d3dtype = PreferenceRule< VertexTypeMapping<fromType, normalized> >::type };
+    enum { d3dsize = WidenRule<d3dtype, size>::finalWidth };
+
+public:
+    enum { capflag = VertexTypeFlags<d3dtype, d3dsize>::capflag };
+    enum { declflag = VertexTypeFlags<d3dtype, d3dsize>::declflag };
+};
+
+VertexFormat::VertexFormat()
+    : conversionType(VERTEX_CONVERT_NONE),
+      outputElementSize(0),
+      copyFunction(NULL),
+      nativeFormat(D3DDECLTYPE_UNUSED),
+      componentType(GL_NONE)
+{
+}
+
+// Initialize a TranslationInfo
+VertexFormat CreateVertexFormatInfo(bool identity, size_t elementSize, VertexCopyFunction copyFunc, D3DDECLTYPE nativeFormat)
+{
+    VertexFormat formatInfo;
+    formatInfo.conversionType = identity ? VERTEX_CONVERT_NONE : VERTEX_CONVERT_CPU;
+    formatInfo.outputElementSize = elementSize;
+    formatInfo.copyFunction = copyFunc;
+    formatInfo.nativeFormat = nativeFormat;
+    formatInfo.componentType = GetDeclTypeComponentType(nativeFormat);
+    return formatInfo;
+}
+
+#define TRANSLATION(type, norm, size, preferred)                                    \
+    CreateVertexFormatInfo                                                          \
+    (                                                                               \
+        Converter<type, norm, size, preferred>::identity,                           \
+        Converter<type, norm, size, preferred>::finalSize,                          \
+        Converter<type, norm, size, preferred>::convertArray,                       \
+        static_cast<D3DDECLTYPE>(Converter<type, norm, size, preferred>::declflag)  \
+    )
+
+#define TRANSLATION_FOR_TYPE_NORM_SIZE(type, norm, size)    \
+    {                                                       \
+        Converter<type, norm, size, UsePreferred>::capflag, \
+        TRANSLATION(type, norm, size, UsePreferred),        \
+        TRANSLATION(type, norm, size, UseFallback)          \
+    }
+
+#define TRANSLATIONS_FOR_TYPE(type)                                                                                                                                                                         \
+    {                                                                                                                                                                                                       \
+        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 4) }, \
+        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 4) },     \
+    }
+
+#define TRANSLATIONS_FOR_TYPE_NO_NORM(type)                                                                                                                                                                 \
+    {                                                                                                                                                                                                       \
+        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 4) }, \
+        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 4) }, \
+    }
+
+static inline unsigned int ComputeTypeIndex(GLenum type)
+{
+    switch (type)
+    {
+      case GL_BYTE:           return 0;
+      case GL_UNSIGNED_BYTE:  return 1;
+      case GL_SHORT:          return 2;
+      case GL_UNSIGNED_SHORT: return 3;
+      case GL_FIXED:          return 4;
+      case GL_FLOAT:          return 5;
+
+      default: UNREACHABLE(); return 5;
+    }
+}
+
+const VertexFormat &GetVertexFormatInfo(DWORD supportedDeclTypes, const gl::VertexFormat &vertexFormat)
+{
+    static bool initialized = false;
+    static DWORD intializedDeclTypes = 0;
+    static VertexFormat formatConverters[NUM_GL_VERTEX_ATTRIB_TYPES][2][4];
+    if (!initialized)
+    {
+        const TranslationDescription translations[NUM_GL_VERTEX_ATTRIB_TYPES][2][4] = // [GL types as enumerated by typeIndex()][normalized][size-1]
+        {
+            TRANSLATIONS_FOR_TYPE(GL_BYTE),
+            TRANSLATIONS_FOR_TYPE(GL_UNSIGNED_BYTE),
+            TRANSLATIONS_FOR_TYPE(GL_SHORT),
+            TRANSLATIONS_FOR_TYPE(GL_UNSIGNED_SHORT),
+            TRANSLATIONS_FOR_TYPE_NO_NORM(GL_FIXED),
+            TRANSLATIONS_FOR_TYPE_NO_NORM(GL_FLOAT)
+        };
+        for (unsigned int i = 0; i < NUM_GL_VERTEX_ATTRIB_TYPES; i++)
+        {
+            for (unsigned int j = 0; j < 2; j++)
+            {
+                for (unsigned int k = 0; k < 4; k++)
+                {
+                    if (translations[i][j][k].capsFlag == 0 || (supportedDeclTypes & translations[i][j][k].capsFlag) != 0)
+                    {
+                        formatConverters[i][j][k] = translations[i][j][k].preferredConversion;
+                    }
+                    else
+                    {
+                        formatConverters[i][j][k] = translations[i][j][k].fallbackConversion;
+                    }
+                }
+            }
+        }
+        initialized = true;
+        intializedDeclTypes = supportedDeclTypes;
+    }
+
+    ASSERT(intializedDeclTypes == supportedDeclTypes);
+
+    // Pure integer attributes only supported in ES3.0
+    ASSERT(!vertexFormat.mPureInteger);
+    return formatConverters[ComputeTypeIndex(vertexFormat.mType)][vertexFormat.mNormalized][vertexFormat.mComponents - 1];
+}
+
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/formatutils9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/formatutils9.h
new file mode 100644
index 0000000000..f26fe43b36
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/formatutils9.h
@@ -0,0 +1,74 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// formatutils9.h: Queries for GL image formats and their translations to D3D9
+// formats.
+
+#ifndef LIBGLESV2_RENDERER_FORMATUTILS9_H_
+#define LIBGLESV2_RENDERER_FORMATUTILS9_H_
+
+#include "libGLESv2/formatutils.h"
+
+#include <map>
+
+namespace rx
+{
+
+class Renderer9;
+
+namespace d3d9
+{
+
+typedef std::map<std::pair<GLenum, GLenum>, ColorCopyFunction> FastCopyFunctionMap;
+
+struct D3DFormat
+{
+    D3DFormat();
+
+    GLuint pixelBytes;
+    GLuint blockWidth;
+    GLuint blockHeight;
+
+    GLenum internalFormat;
+
+    MipGenerationFunction mipGenerationFunction;
+    ColorReadFunction colorReadFunction;
+
+    FastCopyFunctionMap fastCopyFunctions;
+    ColorCopyFunction getFastCopyFunction(GLenum format, GLenum type) const;
+};
+const D3DFormat &GetD3DFormatInfo(D3DFORMAT format);
+
+struct VertexFormat
+{
+    VertexFormat();
+
+    VertexConversionType conversionType;
+    size_t outputElementSize;
+    VertexCopyFunction copyFunction;
+    D3DDECLTYPE nativeFormat;
+    GLenum componentType;
+};
+const VertexFormat &GetVertexFormatInfo(DWORD supportedDeclTypes, const gl::VertexFormat &vertexFormat);
+
+struct TextureFormat
+{
+    TextureFormat();
+
+    D3DFORMAT texFormat;
+    D3DFORMAT renderFormat;
+
+    InitializeTextureDataFunction dataInitializerFunction;
+
+    LoadImageFunction loadFunction;
+};
+const TextureFormat &GetTextureFormatInfo(GLenum internalFormat);
+
+}
+
+}
+
+#endif // LIBGLESV2_RENDERER_FORMATUTILS9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.cpp
new file mode 100644
index 0000000000..e7a91e62d6
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.cpp
@@ -0,0 +1,542 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// renderer9_utils.cpp: Conversion functions and other utility routines
+// specific to the D3D9 renderer.
+
+#include "libGLESv2/renderer/d3d/d3d9/renderer9_utils.h"
+#include "libGLESv2/renderer/d3d/d3d9/formatutils9.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/renderer/d3d/d3d9/RenderTarget9.h"
+
+#include "common/mathutil.h"
+#include "common/debug.h"
+
+#include "third_party/systeminfo/SystemInfo.h"
+
+namespace rx
+{
+
+namespace gl_d3d9
+{
+
+D3DCMPFUNC ConvertComparison(GLenum comparison)
+{
+    D3DCMPFUNC d3dComp = D3DCMP_ALWAYS;
+    switch (comparison)
+    {
+      case GL_NEVER:    d3dComp = D3DCMP_NEVER;        break;
+      case GL_ALWAYS:   d3dComp = D3DCMP_ALWAYS;       break;
+      case GL_LESS:     d3dComp = D3DCMP_LESS;         break;
+      case GL_LEQUAL:   d3dComp = D3DCMP_LESSEQUAL;    break;
+      case GL_EQUAL:    d3dComp = D3DCMP_EQUAL;        break;
+      case GL_GREATER:  d3dComp = D3DCMP_GREATER;      break;
+      case GL_GEQUAL:   d3dComp = D3DCMP_GREATEREQUAL; break;
+      case GL_NOTEQUAL: d3dComp = D3DCMP_NOTEQUAL;     break;
+      default: UNREACHABLE();
+    }
+
+    return d3dComp;
+}
+
+D3DCOLOR ConvertColor(gl::ColorF color)
+{
+    return D3DCOLOR_RGBA(gl::unorm<8>(color.red),
+                         gl::unorm<8>(color.green),
+                         gl::unorm<8>(color.blue),
+                         gl::unorm<8>(color.alpha));
+}
+
+D3DBLEND ConvertBlendFunc(GLenum blend)
+{
+    D3DBLEND d3dBlend = D3DBLEND_ZERO;
+
+    switch (blend)
+    {
+      case GL_ZERO:                     d3dBlend = D3DBLEND_ZERO;           break;
+      case GL_ONE:                      d3dBlend = D3DBLEND_ONE;            break;
+      case GL_SRC_COLOR:                d3dBlend = D3DBLEND_SRCCOLOR;       break;
+      case GL_ONE_MINUS_SRC_COLOR:      d3dBlend = D3DBLEND_INVSRCCOLOR;    break;
+      case GL_DST_COLOR:                d3dBlend = D3DBLEND_DESTCOLOR;      break;
+      case GL_ONE_MINUS_DST_COLOR:      d3dBlend = D3DBLEND_INVDESTCOLOR;   break;
+      case GL_SRC_ALPHA:                d3dBlend = D3DBLEND_SRCALPHA;       break;
+      case GL_ONE_MINUS_SRC_ALPHA:      d3dBlend = D3DBLEND_INVSRCALPHA;    break;
+      case GL_DST_ALPHA:                d3dBlend = D3DBLEND_DESTALPHA;      break;
+      case GL_ONE_MINUS_DST_ALPHA:      d3dBlend = D3DBLEND_INVDESTALPHA;   break;
+      case GL_CONSTANT_COLOR:           d3dBlend = D3DBLEND_BLENDFACTOR;    break;
+      case GL_ONE_MINUS_CONSTANT_COLOR: d3dBlend = D3DBLEND_INVBLENDFACTOR; break;
+      case GL_CONSTANT_ALPHA:           d3dBlend = D3DBLEND_BLENDFACTOR;    break;
+      case GL_ONE_MINUS_CONSTANT_ALPHA: d3dBlend = D3DBLEND_INVBLENDFACTOR; break;
+      case GL_SRC_ALPHA_SATURATE:       d3dBlend = D3DBLEND_SRCALPHASAT;    break;
+      default: UNREACHABLE();
+    }
+
+    return d3dBlend;
+}
+
+D3DBLENDOP ConvertBlendOp(GLenum blendOp)
+{
+    D3DBLENDOP d3dBlendOp = D3DBLENDOP_ADD;
+
+    switch (blendOp)
+    {
+      case GL_FUNC_ADD:              d3dBlendOp = D3DBLENDOP_ADD;         break;
+      case GL_FUNC_SUBTRACT:         d3dBlendOp = D3DBLENDOP_SUBTRACT;    break;
+      case GL_FUNC_REVERSE_SUBTRACT: d3dBlendOp = D3DBLENDOP_REVSUBTRACT; break;
+      case GL_MIN_EXT:               d3dBlendOp = D3DBLENDOP_MIN;         break;
+      case GL_MAX_EXT:               d3dBlendOp = D3DBLENDOP_MAX;         break;
+      default: UNREACHABLE();
+    }
+
+    return d3dBlendOp;
+}
+
+D3DSTENCILOP ConvertStencilOp(GLenum stencilOp)
+{
+    D3DSTENCILOP d3dStencilOp = D3DSTENCILOP_KEEP;
+
+    switch (stencilOp)
+    {
+      case GL_ZERO:      d3dStencilOp = D3DSTENCILOP_ZERO;    break;
+      case GL_KEEP:      d3dStencilOp = D3DSTENCILOP_KEEP;    break;
+      case GL_REPLACE:   d3dStencilOp = D3DSTENCILOP_REPLACE; break;
+      case GL_INCR:      d3dStencilOp = D3DSTENCILOP_INCRSAT; break;
+      case GL_DECR:      d3dStencilOp = D3DSTENCILOP_DECRSAT; break;
+      case GL_INVERT:    d3dStencilOp = D3DSTENCILOP_INVERT;  break;
+      case GL_INCR_WRAP: d3dStencilOp = D3DSTENCILOP_INCR;    break;
+      case GL_DECR_WRAP: d3dStencilOp = D3DSTENCILOP_DECR;    break;
+      default: UNREACHABLE();
+    }
+
+    return d3dStencilOp;
+}
+
+D3DTEXTUREADDRESS ConvertTextureWrap(GLenum wrap)
+{
+    D3DTEXTUREADDRESS d3dWrap = D3DTADDRESS_WRAP;
+
+    switch (wrap)
+    {
+      case GL_REPEAT:            d3dWrap = D3DTADDRESS_WRAP;   break;
+      case GL_CLAMP_TO_EDGE:     d3dWrap = D3DTADDRESS_CLAMP;  break;
+      case GL_MIRRORED_REPEAT:   d3dWrap = D3DTADDRESS_MIRROR; break;
+      default: UNREACHABLE();
+    }
+
+    return d3dWrap;
+}
+
+D3DCULL ConvertCullMode(GLenum cullFace, GLenum frontFace)
+{
+    D3DCULL cull = D3DCULL_CCW;
+    switch (cullFace)
+    {
+      case GL_FRONT:
+        cull = (frontFace == GL_CCW ? D3DCULL_CW : D3DCULL_CCW);
+        break;
+      case GL_BACK:
+        cull = (frontFace == GL_CCW ? D3DCULL_CCW : D3DCULL_CW);
+        break;
+      case GL_FRONT_AND_BACK:
+        cull = D3DCULL_NONE; // culling will be handled during draw
+        break;
+      default: UNREACHABLE();
+    }
+
+    return cull;
+}
+
+D3DCUBEMAP_FACES ConvertCubeFace(GLenum cubeFace)
+{
+    D3DCUBEMAP_FACES face = D3DCUBEMAP_FACE_POSITIVE_X;
+
+    switch (cubeFace)
+    {
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+        face = D3DCUBEMAP_FACE_POSITIVE_X;
+        break;
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+        face = D3DCUBEMAP_FACE_NEGATIVE_X;
+        break;
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+        face = D3DCUBEMAP_FACE_POSITIVE_Y;
+        break;
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+        face = D3DCUBEMAP_FACE_NEGATIVE_Y;
+        break;
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+        face = D3DCUBEMAP_FACE_POSITIVE_Z;
+        break;
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+        face = D3DCUBEMAP_FACE_NEGATIVE_Z;
+        break;
+      default: UNREACHABLE();
+    }
+
+    return face;
+}
+
+DWORD ConvertColorMask(bool red, bool green, bool blue, bool alpha)
+{
+    return (red   ? D3DCOLORWRITEENABLE_RED   : 0) |
+           (green ? D3DCOLORWRITEENABLE_GREEN : 0) |
+           (blue  ? D3DCOLORWRITEENABLE_BLUE  : 0) |
+           (alpha ? D3DCOLORWRITEENABLE_ALPHA : 0);
+}
+
+D3DTEXTUREFILTERTYPE ConvertMagFilter(GLenum magFilter, float maxAnisotropy)
+{
+    if (maxAnisotropy > 1.0f)
+    {
+        return D3DTEXF_ANISOTROPIC;
+    }
+
+    D3DTEXTUREFILTERTYPE d3dMagFilter = D3DTEXF_POINT;
+    switch (magFilter)
+    {
+      case GL_NEAREST: d3dMagFilter = D3DTEXF_POINT;  break;
+      case GL_LINEAR:  d3dMagFilter = D3DTEXF_LINEAR; break;
+      default: UNREACHABLE();
+    }
+
+    return d3dMagFilter;
+}
+
+void ConvertMinFilter(GLenum minFilter, D3DTEXTUREFILTERTYPE *d3dMinFilter, D3DTEXTUREFILTERTYPE *d3dMipFilter, float maxAnisotropy)
+{
+    switch (minFilter)
+    {
+      case GL_NEAREST:
+        *d3dMinFilter = D3DTEXF_POINT;
+        *d3dMipFilter = D3DTEXF_NONE;
+        break;
+      case GL_LINEAR:
+        *d3dMinFilter = D3DTEXF_LINEAR;
+        *d3dMipFilter = D3DTEXF_NONE;
+        break;
+      case GL_NEAREST_MIPMAP_NEAREST:
+        *d3dMinFilter = D3DTEXF_POINT;
+        *d3dMipFilter = D3DTEXF_POINT;
+        break;
+      case GL_LINEAR_MIPMAP_NEAREST:
+        *d3dMinFilter = D3DTEXF_LINEAR;
+        *d3dMipFilter = D3DTEXF_POINT;
+        break;
+      case GL_NEAREST_MIPMAP_LINEAR:
+        *d3dMinFilter = D3DTEXF_POINT;
+        *d3dMipFilter = D3DTEXF_LINEAR;
+        break;
+      case GL_LINEAR_MIPMAP_LINEAR:
+        *d3dMinFilter = D3DTEXF_LINEAR;
+        *d3dMipFilter = D3DTEXF_LINEAR;
+        break;
+      default:
+        *d3dMinFilter = D3DTEXF_POINT;
+        *d3dMipFilter = D3DTEXF_NONE;
+        UNREACHABLE();
+    }
+
+    if (maxAnisotropy > 1.0f)
+    {
+        *d3dMinFilter = D3DTEXF_ANISOTROPIC;
+    }
+}
+
+D3DMULTISAMPLE_TYPE GetMultisampleType(GLuint samples)
+{
+    return (samples > 1) ? static_cast<D3DMULTISAMPLE_TYPE>(samples) : D3DMULTISAMPLE_NONE;
+}
+
+}
+
+namespace d3d9_gl
+{
+
+GLsizei GetSamplesCount(D3DMULTISAMPLE_TYPE type)
+{
+    return (type != D3DMULTISAMPLE_NONMASKABLE) ? type : 0;
+}
+
+bool IsFormatChannelEquivalent(D3DFORMAT d3dformat, GLenum format)
+{
+    GLenum internalFormat = d3d9::GetD3DFormatInfo(d3dformat).internalFormat;
+    GLenum convertedFormat = gl::GetInternalFormatInfo(internalFormat).format;
+    return convertedFormat == format;
+}
+
+static gl::TextureCaps GenerateTextureFormatCaps(GLenum internalFormat, IDirect3D9 *d3d9, D3DDEVTYPE deviceType,
+                                                 UINT adapter, D3DFORMAT adapterFormat)
+{
+    gl::TextureCaps textureCaps;
+
+    const d3d9::TextureFormat &d3dFormatInfo = d3d9::GetTextureFormatInfo(internalFormat);
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+    if (formatInfo.depthBits > 0 || formatInfo.stencilBits > 0)
+    {
+        textureCaps.texturable = SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, adapterFormat, 0, D3DRTYPE_TEXTURE, d3dFormatInfo.texFormat));
+    }
+    else
+    {
+        textureCaps.texturable = SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, adapterFormat, 0, D3DRTYPE_TEXTURE, d3dFormatInfo.texFormat)) &&
+                                 SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, adapterFormat, 0, D3DRTYPE_CUBETEXTURE, d3dFormatInfo.texFormat));
+    }
+
+    textureCaps.filterable = SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, adapterFormat, D3DUSAGE_QUERY_FILTER, D3DRTYPE_TEXTURE, d3dFormatInfo.texFormat));
+    textureCaps.renderable = SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, adapterFormat, D3DUSAGE_DEPTHSTENCIL, D3DRTYPE_TEXTURE, d3dFormatInfo.renderFormat)) ||
+                             SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, adapterFormat, D3DUSAGE_RENDERTARGET, D3DRTYPE_TEXTURE, d3dFormatInfo.renderFormat));
+
+    textureCaps.sampleCounts.insert(1);
+    for (size_t i = D3DMULTISAMPLE_2_SAMPLES; i <= D3DMULTISAMPLE_16_SAMPLES; i++)
+    {
+        D3DMULTISAMPLE_TYPE multisampleType = D3DMULTISAMPLE_TYPE(i);
+
+        HRESULT result = d3d9->CheckDeviceMultiSampleType(adapter, deviceType, d3dFormatInfo.renderFormat, TRUE, multisampleType, NULL);
+        if (SUCCEEDED(result))
+        {
+            textureCaps.sampleCounts.insert(i);
+        }
+    }
+
+    return textureCaps;
+}
+
+void GenerateCaps(IDirect3D9 *d3d9, IDirect3DDevice9 *device, D3DDEVTYPE deviceType, UINT adapter, gl::Caps *caps,
+                  gl::TextureCapsMap *textureCapsMap, gl::Extensions *extensions)
+{
+    D3DCAPS9 deviceCaps;
+    if (FAILED(d3d9->GetDeviceCaps(adapter, deviceType, &deviceCaps)))
+    {
+        // Can't continue with out device caps
+        return;
+    }
+
+    D3DDISPLAYMODE currentDisplayMode;
+    d3d9->GetAdapterDisplayMode(adapter, &currentDisplayMode);
+
+    GLuint maxSamples = 0;
+    const gl::FormatSet &allFormats = gl::GetAllSizedInternalFormats();
+    for (gl::FormatSet::const_iterator internalFormat = allFormats.begin(); internalFormat != allFormats.end(); ++internalFormat)
+    {
+        gl::TextureCaps textureCaps = GenerateTextureFormatCaps(*internalFormat, d3d9, deviceType, adapter,
+                                                                currentDisplayMode.Format);
+        textureCapsMap->insert(*internalFormat, textureCaps);
+
+        maxSamples = std::max(maxSamples, textureCaps.getMaxSamples());
+
+        if (gl::GetInternalFormatInfo(*internalFormat).compressed)
+        {
+            caps->compressedTextureFormats.push_back(*internalFormat);
+        }
+    }
+
+    // GL core feature limits
+    caps->maxElementIndex = static_cast<GLint64>(std::numeric_limits<unsigned int>::max());
+
+    // 3D textures are unimplemented in D3D9
+    caps->max3DTextureSize = 1;
+
+    // Only one limit in GL, use the minimum dimension
+    caps->max2DTextureSize = std::min(deviceCaps.MaxTextureWidth, deviceCaps.MaxTextureHeight);
+
+    // D3D treats cube maps as a special case of 2D textures
+    caps->maxCubeMapTextureSize = caps->max2DTextureSize;
+
+    // Array textures are not available in D3D9
+    caps->maxArrayTextureLayers = 1;
+
+    // ES3-only feature
+    caps->maxLODBias = 0.0f;
+
+    // No specific limits on render target size, maximum 2D texture size is equivalent
+    caps->maxRenderbufferSize = caps->max2DTextureSize;
+
+    // Draw buffers are not supported in D3D9
+    caps->maxDrawBuffers = 1;
+    caps->maxColorAttachments = 1;
+
+    // No specific limits on viewport size, maximum 2D texture size is equivalent
+    caps->maxViewportWidth = caps->max2DTextureSize;
+    caps->maxViewportHeight = caps->maxViewportWidth;
+
+    // Point size is clamped to 1.0f when the shader model is less than 3
+    caps->minAliasedPointSize = 1.0f;
+    caps->maxAliasedPointSize = ((D3DSHADER_VERSION_MAJOR(deviceCaps.PixelShaderVersion) >= 3) ? deviceCaps.MaxPointSize : 1.0f);
+
+    // Wide lines not supported
+    caps->minAliasedLineWidth = 1.0f;
+    caps->maxAliasedLineWidth = 1.0f;
+
+    // Primitive count limits (unused in ES2)
+    caps->maxElementsIndices = 0;
+    caps->maxElementsVertices = 0;
+
+    // Program and shader binary formats (no supported shader binary formats)
+    caps->programBinaryFormats.push_back(GL_PROGRAM_BINARY_ANGLE);
+
+    // WaitSync is ES3-only, set to zero
+    caps->maxServerWaitTimeout = 0;
+
+    // Vertex shader limits
+    caps->maxVertexAttributes = 16;
+
+    const size_t reservedVertexUniformVectors = 2; // dx_ViewAdjust and dx_DepthRange.
+    const size_t MAX_VERTEX_CONSTANT_VECTORS_D3D9 = 256;
+    caps->maxVertexUniformVectors = MAX_VERTEX_CONSTANT_VECTORS_D3D9 - reservedVertexUniformVectors;
+    caps->maxVertexUniformComponents = caps->maxVertexUniformVectors * 4;
+
+    caps->maxVertexUniformBlocks = 0;
+
+    const size_t MAX_VERTEX_OUTPUT_VECTORS_SM3 = 10;
+    const size_t MAX_VERTEX_OUTPUT_VECTORS_SM2 = 8;
+    caps->maxVertexOutputComponents = ((deviceCaps.VertexShaderVersion >= D3DVS_VERSION(3, 0)) ? MAX_VERTEX_OUTPUT_VECTORS_SM3
+                                                                                               : MAX_VERTEX_OUTPUT_VECTORS_SM2) * 4;
+
+    // Only Direct3D 10 ready devices support all the necessary vertex texture formats.
+    // We test this using D3D9 by checking support for the R16F format.
+    if (deviceCaps.VertexShaderVersion >= D3DVS_VERSION(3, 0) &&
+        SUCCEEDED(d3d9->CheckDeviceFormat(adapter, deviceType, currentDisplayMode.Format,
+                                          D3DUSAGE_QUERY_VERTEXTEXTURE, D3DRTYPE_TEXTURE, D3DFMT_R16F)))
+    {
+        const size_t MAX_TEXTURE_IMAGE_UNITS_VTF_SM3 = 4;
+        caps->maxVertexTextureImageUnits = MAX_TEXTURE_IMAGE_UNITS_VTF_SM3;
+    }
+    else
+    {
+        caps->maxVertexTextureImageUnits = 0;
+    }
+
+    // Fragment shader limits
+    const size_t reservedPixelUniformVectors = 3; // dx_ViewCoords, dx_DepthFront and dx_DepthRange.
+
+    const size_t MAX_PIXEL_CONSTANT_VECTORS_SM3 = 224;
+    const size_t MAX_PIXEL_CONSTANT_VECTORS_SM2 = 32;
+    caps->maxFragmentUniformVectors = ((deviceCaps.PixelShaderVersion >= D3DPS_VERSION(3, 0)) ? MAX_PIXEL_CONSTANT_VECTORS_SM3
+                                                                                              : MAX_PIXEL_CONSTANT_VECTORS_SM2) - reservedPixelUniformVectors;
+    caps->maxFragmentUniformComponents = caps->maxFragmentUniformVectors * 4;
+    caps->maxFragmentUniformBlocks = 0;
+    caps->maxFragmentInputComponents = caps->maxVertexOutputComponents;
+    caps->maxTextureImageUnits = 16;
+    caps->minProgramTexelOffset = 0;
+    caps->maxProgramTexelOffset = 0;
+
+    // Aggregate shader limits (unused in ES2)
+    caps->maxUniformBufferBindings = 0;
+    caps->maxUniformBlockSize = 0;
+    caps->uniformBufferOffsetAlignment = 0;
+    caps->maxCombinedUniformBlocks = 0;
+    caps->maxCombinedVertexUniformComponents = 0;
+    caps->maxCombinedFragmentUniformComponents = 0;
+    caps->maxVaryingComponents = 0;
+
+    // Aggregate shader limits
+    caps->maxVaryingVectors = caps->maxVertexOutputComponents / 4;
+    caps->maxCombinedTextureImageUnits = caps->maxVertexTextureImageUnits + caps->maxTextureImageUnits;
+
+    // Transform feedback limits
+    caps->maxTransformFeedbackInterleavedComponents = 0;
+    caps->maxTransformFeedbackSeparateAttributes = 0;
+    caps->maxTransformFeedbackSeparateComponents = 0;
+
+    // GL extension support
+    extensions->setTextureExtensionSupport(*textureCapsMap);
+    extensions->elementIndexUint = deviceCaps.MaxVertexIndex >= (1 << 16);
+    extensions->packedDepthStencil = true;
+    extensions->getProgramBinary = true;
+    extensions->rgb8rgba8 = true;
+    extensions->readFormatBGRA = true;
+    extensions->pixelBufferObject = false;
+    extensions->mapBuffer = false;
+    extensions->mapBufferRange = false;
+
+    // ATI cards on XP have problems with non-power-of-two textures.
+    D3DADAPTER_IDENTIFIER9 adapterId = { 0 };
+    if (SUCCEEDED(d3d9->GetAdapterIdentifier(adapter, 0, &adapterId)))
+    {
+        extensions->textureNPOT = !(deviceCaps.TextureCaps & D3DPTEXTURECAPS_POW2) &&
+                                      !(deviceCaps.TextureCaps & D3DPTEXTURECAPS_CUBEMAP_POW2) &&
+                                      !(deviceCaps.TextureCaps & D3DPTEXTURECAPS_NONPOW2CONDITIONAL) &&
+                                      !(isWindowsVistaOrGreater() && adapterId.VendorId == VENDOR_ID_AMD);
+    }
+    else
+    {
+        extensions->textureNPOT = false;
+    }
+
+    extensions->drawBuffers = false;
+    extensions->textureStorage = true;
+
+    // Must support a minimum of 2:1 anisotropy for max anisotropy to be considered supported, per the spec
+    extensions->textureFilterAnisotropic = (deviceCaps.RasterCaps & D3DPRASTERCAPS_ANISOTROPY) != 0 && deviceCaps.MaxAnisotropy >= 2;
+    extensions->maxTextureAnisotropy = static_cast<GLfloat>(deviceCaps.MaxAnisotropy);
+
+    // Check occlusion query support by trying to create one
+    IDirect3DQuery9 *occlusionQuery = NULL;
+    extensions->occlusionQueryBoolean = SUCCEEDED(device->CreateQuery(D3DQUERYTYPE_OCCLUSION, &occlusionQuery)) && occlusionQuery;
+    SafeRelease(occlusionQuery);
+
+    // Check event query support by trying to create one
+    IDirect3DQuery9 *eventQuery = NULL;
+    extensions->fence = SUCCEEDED(device->CreateQuery(D3DQUERYTYPE_EVENT, &eventQuery)) && eventQuery;
+    SafeRelease(eventQuery);
+
+    extensions->timerQuery = false; // Unimplemented
+    extensions->robustness = true;
+    extensions->blendMinMax = true;
+    extensions->framebufferBlit = true;
+    extensions->framebufferMultisample = true;
+    extensions->maxSamples = maxSamples;
+    extensions->instancedArrays = deviceCaps.PixelShaderVersion >= D3DPS_VERSION(3, 0);
+    extensions->packReverseRowOrder = true;
+    extensions->standardDerivatives = (deviceCaps.PS20Caps.Caps & D3DPS20CAPS_GRADIENTINSTRUCTIONS) != 0;
+    extensions->shaderTextureLOD = true;
+    extensions->fragDepth = true;
+    extensions->textureUsage = true;
+    extensions->translatedShaderSource = true;
+    extensions->colorBufferFloat = false;
+}
+
+}
+
+namespace d3d9
+{
+
+GLuint ComputeBlockSize(D3DFORMAT format, GLuint width, GLuint height)
+{
+    const D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(format);
+    GLuint numBlocksWide = (width + d3dFormatInfo.blockWidth - 1) / d3dFormatInfo.blockWidth;
+    GLuint numBlocksHight = (height + d3dFormatInfo.blockHeight - 1) / d3dFormatInfo.blockHeight;
+    return (d3dFormatInfo.pixelBytes * numBlocksWide * numBlocksHight);
+}
+
+void MakeValidSize(bool isImage, D3DFORMAT format, GLsizei *requestWidth, GLsizei *requestHeight, int *levelOffset)
+{
+    const D3DFormat &d3dFormatInfo = d3d9::GetD3DFormatInfo(format);
+
+    int upsampleCount = 0;
+    // Don't expand the size of full textures that are at least (blockWidth x blockHeight) already.
+    if (isImage || *requestWidth < static_cast<GLsizei>(d3dFormatInfo.blockWidth) ||
+        *requestHeight < static_cast<GLsizei>(d3dFormatInfo.blockHeight))
+    {
+        while (*requestWidth % d3dFormatInfo.blockWidth != 0 || *requestHeight % d3dFormatInfo.blockHeight != 0)
+        {
+            *requestWidth <<= 1;
+            *requestHeight <<= 1;
+            upsampleCount++;
+        }
+    }
+    *levelOffset = upsampleCount;
+}
+
+RenderTarget9 *GetAttachmentRenderTarget(gl::FramebufferAttachment *attachment)
+{
+    RenderTarget *renderTarget = rx::GetAttachmentRenderTarget(attachment);
+    return RenderTarget9::makeRenderTarget9(renderTarget);
+}
+
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/renderer9_utils.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.h
index bf6cdf1ea6..b0a940e60a 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/renderer9_utils.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.h
@@ -1,25 +1,32 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
 
-// renderer9_utils.h: Conversion functions and other utility routines 
+// renderer9_utils.h: Conversion functions and other utility routines
 // specific to the D3D9 renderer
 
 #ifndef LIBGLESV2_RENDERER_RENDERER9_UTILS_H
 #define LIBGLESV2_RENDERER_RENDERER9_UTILS_H
 
-#include "libGLESv2/utilities.h"
+#include "libGLESv2/angletypes.h"
+#include "libGLESv2/Caps.h"
 
-const D3DFORMAT D3DFMT_INTZ = ((D3DFORMAT)(MAKEFOURCC('I','N','T','Z')));
-const D3DFORMAT D3DFMT_NULL = ((D3DFORMAT)(MAKEFOURCC('N','U','L','L')));
+namespace gl
+{
+class FramebufferAttachment;
+}
+
+namespace rx
+{
+class RenderTarget9;
 
 namespace gl_d3d9
 {
 
 D3DCMPFUNC ConvertComparison(GLenum comparison);
-D3DCOLOR ConvertColor(gl::Color color);
+D3DCOLOR ConvertColor(gl::ColorF color);
 D3DBLEND ConvertBlendFunc(GLenum blend);
 D3DBLENDOP ConvertBlendOp(GLenum blendOp);
 D3DSTENCILOP ConvertStencilOp(GLenum stencilOp);
@@ -29,31 +36,29 @@ D3DCUBEMAP_FACES ConvertCubeFace(GLenum cubeFace);
 DWORD ConvertColorMask(bool red, bool green, bool blue, bool alpha);
 D3DTEXTUREFILTERTYPE ConvertMagFilter(GLenum magFilter, float maxAnisotropy);
 void ConvertMinFilter(GLenum minFilter, D3DTEXTUREFILTERTYPE *d3dMinFilter, D3DTEXTUREFILTERTYPE *d3dMipFilter, float maxAnisotropy);
-D3DFORMAT ConvertRenderbufferFormat(GLenum format);
-D3DMULTISAMPLE_TYPE GetMultisampleTypeFromSamples(GLsizei samples);
+
+D3DMULTISAMPLE_TYPE GetMultisampleType(GLuint samples);
 
 }
 
 namespace d3d9_gl
 {
 
-GLuint GetAlphaSize(D3DFORMAT colorFormat);
-GLuint GetStencilSize(D3DFORMAT stencilFormat);
-
-GLsizei GetSamplesFromMultisampleType(D3DMULTISAMPLE_TYPE type);
+GLsizei GetSamplesCount(D3DMULTISAMPLE_TYPE type);
 
 bool IsFormatChannelEquivalent(D3DFORMAT d3dformat, GLenum format);
-GLenum ConvertBackBufferFormat(D3DFORMAT format);
-GLenum ConvertDepthStencilFormat(D3DFORMAT format);
-GLenum ConvertRenderTargetFormat(D3DFORMAT format);
-GLenum GetEquivalentFormat(D3DFORMAT format);
+
+void GenerateCaps(IDirect3D9 *d3d9, IDirect3DDevice9 *device, D3DDEVTYPE deviceType, UINT adapter, gl::Caps *caps,
+                  gl::TextureCapsMap *textureCapsMap, gl::Extensions *extensions);
 
 }
 
 namespace d3d9
 {
-bool IsCompressedFormat(D3DFORMAT format);
-size_t ComputeRowSize(D3DFORMAT format, unsigned int width);
+
+GLuint ComputeBlockSize(D3DFORMAT format, GLuint width, GLuint height);
+
+void MakeValidSize(bool isImage, D3DFORMAT format, GLsizei *requestWidth, GLsizei *requestHeight, int *levelOffset);
 
 inline bool isDeviceLostError(HRESULT errorCode)
 {
@@ -69,6 +74,10 @@ inline bool isDeviceLostError(HRESULT errorCode)
     }
 }
 
+RenderTarget9 *GetAttachmentRenderTarget(gl::FramebufferAttachment *attachment);
+
+}
+
 }
 
 #endif // LIBGLESV2_RENDERER_RENDERER9_UTILS_H
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps
new file mode 100644
index 0000000000..eb43eb3e7a
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps
@@ -0,0 +1,33 @@
+//
+// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+sampler2D tex : s0;
+
+uniform float4 mult : c0;
+uniform float4 add  : c1;
+
+// Passthrough Pixel Shader
+// Outputs texture 0 sampled at texcoord 0.
+float4 PS_passthrough(float4 texcoord : TEXCOORD0) : COLOR
+{
+    return tex2D(tex, texcoord.xy);
+};
+
+// Luminance Conversion Pixel Shader
+// Performs a mad operation using the LA data from the texture with mult.xw and add.xw.
+// Returns data in the form of llla
+float4 PS_luminance(float4 texcoord : TEXCOORD0) : COLOR
+{
+    return (tex2D(tex, texcoord.xy).xw * mult.xw + add.xw).xxxy;
+};
+
+// RGB/A Component Mask Pixel Shader
+// Performs a mad operation using the texture's RGBA data with mult.xyzw and add.xyzw.
+// Returns data in the form of rgba
+float4 PS_componentmask(float4 texcoord : TEXCOORD0) : COLOR
+{
+    return tex2D(tex, texcoord.xy) * mult + add;
+};
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/shaders/Blit.vs b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs
index 3a36980b93..3bd611ba5d 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/shaders/Blit.vs
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs
@@ -17,7 +17,7 @@ uniform float4 halfPixelSize : c0;
 // Outputs the homogenous position as-is.
 // Outputs a tex coord with (0,0) in the upper-left corner of the screen and (1,1) in the bottom right.
 // C0.X must be negative half-pixel width, C0.Y must be half-pixel height. C0.ZW must be 0.
-VS_OUTPUT standardvs(in float4 position : POSITION)
+VS_OUTPUT VS_standard(in float4 position : POSITION)
 {
     VS_OUTPUT Out;
 
@@ -32,7 +32,7 @@ VS_OUTPUT standardvs(in float4 position : POSITION)
 // Outputs the homogenous position as-is.
 // Outputs a tex coord with (0,1) in the upper-left corner of the screen and (1,0) in the bottom right.
 // C0.XY must be the half-pixel width and height. C0.ZW must be 0.
-VS_OUTPUT flipyvs(in float4 position : POSITION)
+VS_OUTPUT VS_flipy(in float4 position : POSITION)
 {
     VS_OUTPUT Out;
 
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/BufferStorage11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/BufferStorage11.cpp
deleted file mode 100644
index 31d5b8b886..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/BufferStorage11.cpp
+++ /dev/null
@@ -1,366 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// BufferStorage11.cpp Defines the BufferStorage11 class.
-
-#include "libGLESv2/renderer/d3d11/BufferStorage11.h"
-#include "libGLESv2/main.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-
-namespace rx
-{
-
-BufferStorage11::BufferStorage11(Renderer11 *renderer)
-{
-    mRenderer = renderer;
-
-    mStagingBuffer = NULL;
-    mStagingBufferSize = 0;
-
-    mSize = 0;
-
-    mResolvedData = NULL;
-    mResolvedDataSize = 0;
-    mResolvedDataValid = false;
-
-    mReadUsageCount = 0;
-    mWriteUsageCount = 0;
-}
-
-BufferStorage11::~BufferStorage11()
-{
-    SafeRelease(mStagingBuffer);
-
-    if (mResolvedData)
-    {
-        free(mResolvedData);
-        mResolvedData = NULL;
-    }
-
-    for (auto it = mDirectBuffers.begin(); it != mDirectBuffers.end(); it++)
-    {
-        SafeDelete(it->second);
-    }
-}
-
-BufferStorage11 *BufferStorage11::makeBufferStorage11(BufferStorage *bufferStorage)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(BufferStorage11*, bufferStorage));
-    return static_cast<BufferStorage11*>(bufferStorage);
-}
-
-void *BufferStorage11::getData()
-{
-    ASSERT(mStagingBuffer);
-
-    if (!mResolvedDataValid)
-    {
-        ID3D11Device *device = mRenderer->getDevice();
-        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
-        HRESULT result;
-
-        if (!mResolvedData || mResolvedDataSize < mStagingBufferSize)
-        {
-            free(mResolvedData);
-            mResolvedData = malloc(mSize);
-            mResolvedDataSize = mSize;
-        }
-
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        result = context->Map(mStagingBuffer, 0, D3D11_MAP_READ, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            return gl::error(GL_OUT_OF_MEMORY, (void*)NULL);
-        }
-
-        memcpy(mResolvedData, mappedResource.pData, mSize);
-
-        context->Unmap(mStagingBuffer, 0);
-
-        mResolvedDataValid = true;
-    }
-
-    mReadUsageCount = 0;
-
-    return mResolvedData;
-}
-
-void BufferStorage11::setData(const void* data, unsigned int size, unsigned int offset)
-{
-    ID3D11Device *device = mRenderer->getDevice();
-    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
-    HRESULT result;
-
-    const unsigned int requiredStagingBufferSize = size + offset;
-    const bool createStagingBuffer = !mStagingBuffer || mStagingBufferSize < requiredStagingBufferSize;
-
-    if (createStagingBuffer)
-    {
-        D3D11_BUFFER_DESC bufferDesc;
-        bufferDesc.ByteWidth = requiredStagingBufferSize;
-        bufferDesc.Usage = D3D11_USAGE_STAGING;
-        bufferDesc.BindFlags = 0;
-        bufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE;
-        bufferDesc.MiscFlags = 0;
-        bufferDesc.StructureByteStride = 0;
-
-        HRESULT result;
-        ID3D11Device *device = mRenderer->getDevice();
-        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
-        ID3D11Buffer *newStagingBuffer;
-
-        if (data && offset == 0)
-        {
-            D3D11_SUBRESOURCE_DATA initialData;
-            initialData.pSysMem = data;
-            initialData.SysMemPitch = requiredStagingBufferSize;
-            initialData.SysMemSlicePitch = 0;
-
-            result = device->CreateBuffer(&bufferDesc, &initialData, &newStagingBuffer);
-        }
-        else
-        {
-            result = device->CreateBuffer(&bufferDesc, NULL, &newStagingBuffer);
-        }
-
-        if (FAILED(result))
-        {
-            mStagingBufferSize = 0;
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-
-        mStagingBufferSize = requiredStagingBufferSize;
-
-        if (mStagingBuffer && offset > 0)
-        {
-            // If offset is greater than zero and the buffer is non-null, need to preserve the data from
-            // the old buffer up to offset
-            D3D11_BOX srcBox;
-            srcBox.left = 0;
-            srcBox.right = std::min(offset, requiredStagingBufferSize);
-            srcBox.top = 0;
-            srcBox.bottom = 1;
-            srcBox.front = 0;
-            srcBox.back = 1;
-
-            context->CopySubresourceRegion(newStagingBuffer, 0, 0, 0, 0, mStagingBuffer, 0, &srcBox);
-        }
-
-        SafeRelease(mStagingBuffer);
-        mStagingBuffer = newStagingBuffer;
-    }
-
-    if (data && (offset != 0 || !createStagingBuffer))
-    {
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        result = context->Map(mStagingBuffer, 0, D3D11_MAP_WRITE, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-
-        unsigned char *offsetBufferPointer = reinterpret_cast<unsigned char *>(mappedResource.pData) + offset;
-        memcpy(offsetBufferPointer, data, size);
-
-        context->Unmap(mStagingBuffer, 0);
-    }
-
-    for (auto it = mDirectBuffers.begin(); it != mDirectBuffers.end(); it++)
-    {
-        it->second->markDirty();
-    }
-
-    mSize = std::max(mSize, requiredStagingBufferSize);
-    mWriteUsageCount = 0;
-
-    mResolvedDataValid = false;
-}
-
-void BufferStorage11::copyData(BufferStorage* sourceStorage, unsigned int size,
-                               unsigned int sourceOffset, unsigned int destOffset)
-{
-    BufferStorage11* source = makeBufferStorage11(sourceStorage);
-    if (source)
-    {
-        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
-
-        D3D11_BOX srcBox;
-        srcBox.left = sourceOffset;
-        srcBox.right = sourceOffset + size;
-        srcBox.top = 0;
-        srcBox.bottom = 1;
-        srcBox.front = 0;
-        srcBox.back = 1;
-
-        ASSERT(mStagingBuffer && source->mStagingBuffer);
-        context->CopySubresourceRegion(mStagingBuffer, 0, destOffset, 0, 0, source->mStagingBuffer, 0, &srcBox);
-    }
-}
-
-void BufferStorage11::clear()
-{
-    mResolvedDataValid = false;
-    mSize = 0;
-}
-
-unsigned int BufferStorage11::getSize() const
-{
-    return mSize;
-}
-
-bool BufferStorage11::supportsDirectBinding() const
-{
-    return true;
-}
-
-void BufferStorage11::markBufferUsage()
-{
-    mReadUsageCount++;
-    mWriteUsageCount++;
-
-    const unsigned int usageLimit = 5;
-
-    if (mReadUsageCount > usageLimit && mResolvedData)
-    {
-        free(mResolvedData);
-        mResolvedData = NULL;
-        mResolvedDataSize = 0;
-        mResolvedDataValid = false;
-    }
-}
-
-ID3D11Buffer *BufferStorage11::getBuffer(BufferUsage usage)
-{
-    markBufferUsage();
-
-    DirectBufferStorage11 *directBuffer = NULL;
-
-    auto directBufferIt = mDirectBuffers.find(usage);
-    if (directBufferIt != mDirectBuffers.end())
-    {
-        directBuffer = directBufferIt->second;
-    }
-
-    if (directBuffer)
-    {
-        if (directBuffer->isDirty())
-        {
-            // if updateFromStagingBuffer returns true, the D3D buffer has been recreated
-            // and we should update our serial
-            if (directBuffer->updateFromStagingBuffer(mStagingBuffer, mSize, 0))
-            {
-                updateSerial();
-            }
-        }
-    }
-    else
-    {
-        // buffer is not allocated, create it
-        directBuffer = new DirectBufferStorage11(mRenderer, usage);
-        directBuffer->updateFromStagingBuffer(mStagingBuffer, mSize, 0);
-
-        mDirectBuffers.insert(std::make_pair(usage, directBuffer));
-        updateSerial();
-    }
-
-    return directBuffer->getD3DBuffer();
-}
-
-DirectBufferStorage11::DirectBufferStorage11(Renderer11 *renderer, BufferUsage usage)
-    : mRenderer(renderer),
-      mUsage(usage),
-      mDirectBuffer(NULL),
-      mBufferSize(0),
-      mDirty(false)
-{
-}
-
-DirectBufferStorage11::~DirectBufferStorage11()
-{
-    SafeRelease(mDirectBuffer);
-}
-
-BufferUsage DirectBufferStorage11::getUsage() const
-{
-    return mUsage;
-}
-
-// Returns true if it recreates the direct buffer
-bool DirectBufferStorage11::updateFromStagingBuffer(ID3D11Buffer *stagingBuffer, size_t size, size_t offset)
-{
-    ID3D11Device *device = mRenderer->getDevice();
-    ID3D11DeviceContext *context = mRenderer->getDeviceContext();
-
-    // unused for now
-    ASSERT(offset == 0);
-
-    unsigned int requiredBufferSize = size + offset;
-    bool createBuffer = !mDirectBuffer || mBufferSize < requiredBufferSize;
-
-    // (Re)initialize D3D buffer if needed
-    if (createBuffer)
-    {
-        D3D11_BUFFER_DESC bufferDesc;
-        fillBufferDesc(&bufferDesc, mRenderer, mUsage, requiredBufferSize);
-
-        ID3D11Buffer *newBuffer;
-        HRESULT result = device->CreateBuffer(&bufferDesc, NULL, &newBuffer);
-
-        if (FAILED(result))
-        {
-            return gl::error(GL_OUT_OF_MEMORY, false);
-        }
-
-        // No longer need the old buffer
-        SafeRelease(mDirectBuffer);
-        mDirectBuffer = newBuffer;
-
-        mBufferSize = bufferDesc.ByteWidth;
-    }
-
-    // Copy data via staging buffer
-    D3D11_BOX srcBox;
-    srcBox.left = 0;
-    srcBox.right = size;
-    srcBox.top = 0;
-    srcBox.bottom = 1;
-    srcBox.front = 0;
-    srcBox.back = 1;
-
-    context->CopySubresourceRegion(mDirectBuffer, 0, offset, 0, 0, stagingBuffer, 0, &srcBox);
-
-    mDirty = false;
-
-    return createBuffer;
-}
-
-void DirectBufferStorage11::fillBufferDesc(D3D11_BUFFER_DESC* bufferDesc, Renderer *renderer, BufferUsage usage, unsigned int bufferSize)
-{
-    bufferDesc->ByteWidth = bufferSize;
-    bufferDesc->MiscFlags = 0;
-    bufferDesc->StructureByteStride = 0;
-
-    switch (usage)
-    {
-      case BUFFER_USAGE_VERTEX:
-        bufferDesc->Usage = D3D11_USAGE_DEFAULT;
-        bufferDesc->BindFlags = D3D11_BIND_VERTEX_BUFFER;
-        bufferDesc->CPUAccessFlags = 0;
-        break;
-
-      case BUFFER_USAGE_INDEX:
-        bufferDesc->Usage = D3D11_USAGE_DEFAULT;
-        bufferDesc->BindFlags = D3D11_BIND_INDEX_BUFFER;
-        bufferDesc->CPUAccessFlags = 0;
-        break;
-
-    default:
-        UNREACHABLE();
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/BufferStorage11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/BufferStorage11.h
deleted file mode 100644
index a6afafe1b4..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/BufferStorage11.h
+++ /dev/null
@@ -1,92 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// BufferStorage11.h Defines the BufferStorage11 class.
-
-#ifndef LIBGLESV2_RENDERER_BUFFERSTORAGE11_H_
-#define LIBGLESV2_RENDERER_BUFFERSTORAGE11_H_
-
-#include "libGLESv2/renderer/BufferStorage.h"
-
-namespace rx
-{
-class Renderer;
-class Renderer11;
-class DirectBufferStorage11;
-
-enum BufferUsage
-{
-    BUFFER_USAGE_VERTEX,
-    BUFFER_USAGE_INDEX,
-};
-
-class BufferStorage11 : public BufferStorage
-{
-  public:
-    explicit BufferStorage11(Renderer11 *renderer);
-    virtual ~BufferStorage11();
-
-    static BufferStorage11 *makeBufferStorage11(BufferStorage *bufferStorage);
-
-    virtual void *getData();
-    virtual void setData(const void* data, unsigned int size, unsigned int offset);
-    virtual void copyData(BufferStorage* sourceStorage, unsigned int size,
-                          unsigned int sourceOffset, unsigned int destOffset);
-    virtual void clear();
-    virtual unsigned int getSize() const;
-    virtual bool supportsDirectBinding() const;
-
-    ID3D11Buffer *getBuffer(BufferUsage usage);
-
-  private:
-    Renderer11 *mRenderer;
-
-    ID3D11Buffer *mStagingBuffer;
-    unsigned int mStagingBufferSize;
-
-    std::map<BufferUsage, DirectBufferStorage11*> mDirectBuffers;
-
-    unsigned int mSize;
-
-    void *mResolvedData;
-    unsigned int mResolvedDataSize;
-    bool mResolvedDataValid;
-
-    unsigned int mReadUsageCount;
-    unsigned int mWriteUsageCount;
-
-    void markBufferUsage();
-};
-
-// Each instance of BufferStorageD3DBuffer11 is specialized for a class of D3D binding points
-// - vertex buffers
-// - index buffers
-class DirectBufferStorage11
-{
-  public:
-    DirectBufferStorage11(Renderer11 *renderer, BufferUsage usage);
-    ~DirectBufferStorage11();
-
-    BufferUsage getUsage() const;
-    bool updateFromStagingBuffer(ID3D11Buffer *stagingBuffer, size_t size, size_t offset);
-
-    ID3D11Buffer *getD3DBuffer() { return mDirectBuffer; }
-    bool isDirty() const { return mDirty; }
-    void markDirty() { mDirty = true; }
-
-  private:
-    Renderer11 *mRenderer;
-    const BufferUsage mUsage;
-    ID3D11Buffer *mDirectBuffer;
-    size_t mBufferSize;
-    bool mDirty;
-
-    static void fillBufferDesc(D3D11_BUFFER_DESC* bufferDesc, Renderer *renderer, BufferUsage usage, unsigned int bufferSize);
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_BUFFERSTORAGE11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Fence11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Fence11.cpp
deleted file mode 100644
index 2a7d4d43ef..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Fence11.cpp
+++ /dev/null
@@ -1,134 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Fence11.cpp: Defines the rx::Fence11 class which implements rx::FenceImpl.
-
-#include "libGLESv2/renderer/d3d11/Fence11.h"
-#include "libGLESv2/main.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-
-namespace rx
-{
-
-Fence11::Fence11(rx::Renderer11 *renderer)
-{
-    mRenderer = renderer;
-    mQuery = NULL;
-}
-
-Fence11::~Fence11()
-{
-    if (mQuery)
-    {
-        mQuery->Release();
-        mQuery = NULL;
-    }
-}
-
-GLboolean Fence11::isFence()
-{
-    // GL_NV_fence spec:
-    // A name returned by GenFencesNV, but not yet set via SetFenceNV, is not the name of an existing fence.
-    return mQuery != NULL;
-}
-
-void Fence11::setFence(GLenum condition)
-{
-    if (!mQuery)
-    {
-        D3D11_QUERY_DESC queryDesc;
-        queryDesc.Query = D3D11_QUERY_EVENT;
-        queryDesc.MiscFlags = 0;
-
-        if (FAILED(mRenderer->getDevice()->CreateQuery(&queryDesc, &mQuery)))
-        {
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    mRenderer->getDeviceContext()->End(mQuery);
-
-    setCondition(condition);
-    setStatus(GL_FALSE);
-}
-
-GLboolean Fence11::testFence()
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION, GL_TRUE);
-    }
-
-    HRESULT result = mRenderer->getDeviceContext()->GetData(mQuery, NULL, 0, 0);
-
-    if (mRenderer->isDeviceLost())
-    {
-       return gl::error(GL_OUT_OF_MEMORY, GL_TRUE);
-    }
-
-    ASSERT(result == S_OK || result == S_FALSE);
-    setStatus(result == S_OK);
-    return getStatus();
-}
-
-void Fence11::finishFence()
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    while (!testFence())
-    {
-        Sleep(0);
-    }
-}
-
-void Fence11::getFenceiv(GLenum pname, GLint *params)
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    switch (pname)
-    {
-      case GL_FENCE_STATUS_NV:
-        {
-            // GL_NV_fence spec:
-            // Once the status of a fence has been finished (via FinishFenceNV) or tested and the returned status is TRUE (via either TestFenceNV
-            // or GetFenceivNV querying the FENCE_STATUS_NV), the status remains TRUE until the next SetFenceNV of the fence.
-            if (getStatus())
-            {
-                params[0] = GL_TRUE;
-                return;
-            }
-
-            HRESULT result = mRenderer->getDeviceContext()->GetData(mQuery, NULL, 0, D3D11_ASYNC_GETDATA_DONOTFLUSH);
-
-            if (mRenderer->isDeviceLost())
-            {
-                params[0] = GL_TRUE;
-                return gl::error(GL_OUT_OF_MEMORY);
-            }
-
-            ASSERT(result == S_OK || result == S_FALSE);
-            setStatus(result == S_OK);
-            params[0] = getStatus();
-
-            break;
-        }
-      case GL_FENCE_CONDITION_NV:
-        params[0] = getCondition();
-        break;
-      default:
-        return gl::error(GL_INVALID_ENUM);
-        break;
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp
deleted file mode 100644
index 5d039a35e8..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp
+++ /dev/null
@@ -1,498 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Image11.h: Implements the rx::Image11 class, which acts as the interface to
-// the actual underlying resources of a Texture
-
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-#include "libGLESv2/renderer/d3d11/Image11.h"
-#include "libGLESv2/renderer/d3d11/TextureStorage11.h"
-#include "libGLESv2/Framebuffer.h"
-#include "libGLESv2/Renderbuffer.h"
-
-#include "libGLESv2/main.h"
-#include "libGLESv2/utilities.h"
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
-#include "libGLESv2/renderer/generatemip.h"
-
-namespace rx
-{
-
-Image11::Image11()
-{
-    mStagingTexture = NULL;
-    mRenderer = NULL;
-    mDXGIFormat = DXGI_FORMAT_UNKNOWN;
-}
-
-Image11::~Image11()
-{
-    if (mStagingTexture)
-    {
-        mStagingTexture->Release();
-    }
-}
-
-Image11 *Image11::makeImage11(Image *img)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(rx::Image11*, img));
-    return static_cast<rx::Image11*>(img);
-}
-
-void Image11::generateMipmap(Image11 *dest, Image11 *src)
-{
-    ASSERT(src->getDXGIFormat() == dest->getDXGIFormat());
-    ASSERT(src->getWidth() == 1 || src->getWidth() / 2 == dest->getWidth());
-    ASSERT(src->getHeight() == 1 || src->getHeight() / 2 == dest->getHeight());
-
-    D3D11_MAPPED_SUBRESOURCE destMapped, srcMapped;
-    dest->map(D3D11_MAP_WRITE, &destMapped);
-    src->map(D3D11_MAP_READ, &srcMapped);
-
-    const unsigned char *sourceData = reinterpret_cast<const unsigned char*>(srcMapped.pData);
-    unsigned char *destData = reinterpret_cast<unsigned char*>(destMapped.pData);
-
-    if (sourceData && destData)
-    {
-        switch (src->getDXGIFormat())
-        {
-          case DXGI_FORMAT_R8G8B8A8_UNORM:
-          case DXGI_FORMAT_B8G8R8A8_UNORM:
-            GenerateMip<R8G8B8A8>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_A8_UNORM:
-            GenerateMip<A8>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R8_UNORM:
-            GenerateMip<R8>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R32G32B32A32_FLOAT:
-            GenerateMip<A32B32G32R32F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R32G32B32_FLOAT:
-            GenerateMip<R32G32B32F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R16G16B16A16_FLOAT:
-            GenerateMip<A16B16G16R16F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R8G8_UNORM:
-            GenerateMip<R8G8>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R16_FLOAT:
-            GenerateMip<R16F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R16G16_FLOAT:
-            GenerateMip<R16G16F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R32_FLOAT:
-            GenerateMip<R32F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          case DXGI_FORMAT_R32G32_FLOAT:
-            GenerateMip<R32G32F>(src->getWidth(), src->getHeight(), sourceData, srcMapped.RowPitch, destData, destMapped.RowPitch);
-            break;
-          default:
-            UNREACHABLE();
-            break;
-        }
-
-        dest->unmap();
-        src->unmap();
-    }
-
-    dest->markDirty();
-}
-
-static bool FormatRequiresInitialization(DXGI_FORMAT dxgiFormat, GLenum internalFormat)
-{
-    return (dxgiFormat == DXGI_FORMAT_R8G8B8A8_UNORM && gl::GetAlphaSize(internalFormat) == 0) ||
-           (dxgiFormat == DXGI_FORMAT_R32G32B32A32_FLOAT && gl::GetAlphaSize(internalFormat) == 0);
-}
-
-bool Image11::isDirty() const
-{
-    return ((mStagingTexture || FormatRequiresInitialization(mDXGIFormat, mInternalFormat)) && mDirty);
-}
-
-bool Image11::updateSurface(TextureStorageInterface2D *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
-{
-    TextureStorage11_2D *storage11 = TextureStorage11_2D::makeTextureStorage11_2D(storage->getStorageInstance());
-    return storage11->updateSubresourceLevel(getStagingTexture(), getStagingSubresource(), level, 0, xoffset, yoffset, width, height);
-}
-
-bool Image11::updateSurface(TextureStorageInterfaceCube *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height)
-{
-    TextureStorage11_Cube *storage11 = TextureStorage11_Cube::makeTextureStorage11_Cube(storage->getStorageInstance());
-    return storage11->updateSubresourceLevel(getStagingTexture(), getStagingSubresource(), level, face, xoffset, yoffset, width, height);
-}
-
-bool Image11::redefine(Renderer *renderer, GLint internalformat, GLsizei width, GLsizei height, bool forceRelease)
-{
-    if (mWidth != width ||
-        mHeight != height ||
-        mInternalFormat != internalformat ||
-        forceRelease)
-    {
-        mRenderer = Renderer11::makeRenderer11(renderer);
-
-        mWidth = width;
-        mHeight = height;
-        mInternalFormat = internalformat;
-        // compute the d3d format that will be used
-        mDXGIFormat = gl_d3d11::ConvertTextureFormat(internalformat, mRenderer->getFeatureLevel());
-        mActualFormat = d3d11_gl::ConvertTextureInternalFormat(mDXGIFormat);
-
-        if (mStagingTexture)
-        {
-            mStagingTexture->Release();
-            mStagingTexture = NULL;
-        }
-        
-        return true;
-    }
-
-    return false;
-}
-
-bool Image11::isRenderableFormat() const
-{
-    return TextureStorage11::IsTextureFormatRenderable(mDXGIFormat);
-}
-
-DXGI_FORMAT Image11::getDXGIFormat() const
-{
-    // this should only happen if the image hasn't been redefined first
-    // which would be a bug by the caller
-    ASSERT(mDXGIFormat != DXGI_FORMAT_UNKNOWN);
-
-    return mDXGIFormat;
-}
-
-// Store the pixel rectangle designated by xoffset,yoffset,width,height with pixels stored as format/type at input
-// into the target pixel rectangle.
-void Image11::loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                       GLint unpackAlignment, const void *input)
-{
-    D3D11_MAPPED_SUBRESOURCE mappedImage;
-    HRESULT result = map(D3D11_MAP_WRITE, &mappedImage);
-    if (FAILED(result))
-    {
-        ERR("Could not map image for loading.");
-        return;
-    }
-    
-    GLsizei inputPitch = gl::ComputePitch(width, mInternalFormat, unpackAlignment);
-    size_t pixelSize = d3d11::ComputePixelSizeBits(mDXGIFormat) / 8;
-    void* offsetMappedData = (void*)((BYTE *)mappedImage.pData + (yoffset * mappedImage.RowPitch + xoffset * pixelSize));
-
-    switch (mInternalFormat)
-    {
-      case GL_ALPHA8_EXT:
-        if (mRenderer->getFeatureLevel() >= D3D_FEATURE_LEVEL_10_0)
-            loadAlphaDataToNative(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        else
-            loadAlphaDataToBGRA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_LUMINANCE8_EXT:
-        loadLuminanceDataToNativeOrBGRA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData, false);
-        break;
-      case GL_ALPHA32F_EXT:
-        loadAlphaFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_LUMINANCE32F_EXT:
-        loadLuminanceFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_ALPHA16F_EXT:
-        loadAlphaHalfFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_LUMINANCE16F_EXT:
-        loadLuminanceHalfFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_LUMINANCE8_ALPHA8_EXT:
-        loadLuminanceAlphaDataToNativeOrBGRA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData, false);
-        break;
-      case GL_LUMINANCE_ALPHA32F_EXT:
-        loadLuminanceAlphaFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_LUMINANCE_ALPHA16F_EXT:
-        loadLuminanceAlphaHalfFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGB8_OES:
-        loadRGBUByteDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGB565:
-        loadRGB565DataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGBA8_OES:
-        loadRGBAUByteDataToNative(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGBA4:
-        loadRGBA4444DataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGB5_A1:
-        loadRGBA5551DataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_BGRA8_EXT:
-        loadBGRADataToBGRA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGB32F_EXT:
-        loadRGBFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGB16F_EXT:
-        loadRGBHalfFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGBA32F_EXT:
-        loadRGBAFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      case GL_RGBA16F_EXT:
-        loadRGBAHalfFloatDataToRGBA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-        break;
-      default: UNREACHABLE(); 
-    }
-
-    unmap();
-}
-
-void Image11::loadCompressedData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                                const void *input)
-{
-    ASSERT(xoffset % 4 == 0);
-    ASSERT(yoffset % 4 == 0);
-
-    D3D11_MAPPED_SUBRESOURCE mappedImage;
-    HRESULT result = map(D3D11_MAP_WRITE, &mappedImage);
-    if (FAILED(result))
-    {
-        ERR("Could not map image for loading.");
-        return;
-    }
-
-    // Size computation assumes a 4x4 block compressed texture format
-    size_t blockSize = d3d11::ComputeBlockSizeBits(mDXGIFormat) / 8;
-    void* offsetMappedData = (void*)((BYTE *)mappedImage.pData + ((yoffset / 4) * mappedImage.RowPitch + (xoffset / 4) * blockSize));
-
-    GLsizei inputSize = gl::ComputeCompressedSize(width, height, mInternalFormat);
-    GLsizei inputPitch = gl::ComputeCompressedPitch(width, mInternalFormat);
-    int rows = inputSize / inputPitch;
-    for (int i = 0; i < rows; ++i)
-    {
-        memcpy((void*)((BYTE*)offsetMappedData + i * mappedImage.RowPitch), (void*)((BYTE*)input + i * inputPitch), inputPitch);
-    }
-
-    unmap();
-}
-
-void Image11::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source)
-{
-    gl::Renderbuffer *colorbuffer = source->getReadColorbuffer();
-
-    if (colorbuffer && colorbuffer->getActualFormat() == (GLuint)mActualFormat)
-    {
-        // No conversion needed-- use copyback fastpath
-        ID3D11Texture2D *colorBufferTexture = NULL;
-        unsigned int subresourceIndex = 0;
-
-        if (mRenderer->getRenderTargetResource(colorbuffer, &subresourceIndex, &colorBufferTexture))
-        {
-            D3D11_TEXTURE2D_DESC textureDesc;
-            colorBufferTexture->GetDesc(&textureDesc);
-
-            ID3D11Device *device = mRenderer->getDevice();
-            ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
-
-            ID3D11Texture2D* srcTex = NULL;
-            if (textureDesc.SampleDesc.Count > 1)
-            {
-                D3D11_TEXTURE2D_DESC resolveDesc;
-                resolveDesc.Width = textureDesc.Width;
-                resolveDesc.Height = textureDesc.Height;
-                resolveDesc.MipLevels = 1;
-                resolveDesc.ArraySize = 1;
-                resolveDesc.Format = textureDesc.Format;
-                resolveDesc.SampleDesc.Count = 1;
-                resolveDesc.SampleDesc.Quality = 0;
-                resolveDesc.Usage = D3D11_USAGE_DEFAULT;
-                resolveDesc.BindFlags = 0;
-                resolveDesc.CPUAccessFlags = 0;
-                resolveDesc.MiscFlags = 0;
-
-                HRESULT result = device->CreateTexture2D(&resolveDesc, NULL, &srcTex);
-                if (FAILED(result))
-                {
-                    ERR("Failed to create resolve texture for Image11::copy, HRESULT: 0x%X.", result);
-                    return;
-                }
-
-                deviceContext->ResolveSubresource(srcTex, 0, colorBufferTexture, subresourceIndex, textureDesc.Format);
-                subresourceIndex = 0;
-            }
-            else
-            {
-                srcTex = colorBufferTexture;
-                srcTex->AddRef();
-            }
-
-            D3D11_BOX srcBox;
-            srcBox.left = x;
-            srcBox.right = x + width;
-            srcBox.top = y;
-            srcBox.bottom = y + height;
-            srcBox.front = 0;
-            srcBox.back = 1;
-
-            deviceContext->CopySubresourceRegion(mStagingTexture, 0, xoffset, yoffset, 0, srcTex, subresourceIndex, &srcBox);
-
-            srcTex->Release();
-            colorBufferTexture->Release();
-        }
-    }
-    else
-    {
-        // This format requires conversion, so we must copy the texture to staging and manually convert via readPixels
-        D3D11_MAPPED_SUBRESOURCE mappedImage;
-        HRESULT result = map(D3D11_MAP_WRITE, &mappedImage);
-
-        // determine the offset coordinate into the destination buffer
-        GLsizei rowOffset = gl::ComputePixelSize(mActualFormat) * xoffset;
-        void *dataOffset = static_cast<unsigned char*>(mappedImage.pData) + mappedImage.RowPitch * yoffset + rowOffset;
-
-        mRenderer->readPixels(source, x, y, width, height, gl::ExtractFormat(mInternalFormat), 
-                              gl::ExtractType(mInternalFormat), mappedImage.RowPitch, false, 4, dataOffset);
-
-        unmap();
-    }
-}
-
-ID3D11Texture2D *Image11::getStagingTexture()
-{
-    createStagingTexture();
-
-    return mStagingTexture;
-}
-
-unsigned int Image11::getStagingSubresource()
-{
-    createStagingTexture();
-
-    return mStagingSubresource;
-}
-
-template <typename T, size_t N>
-static void setDefaultData(ID3D11DeviceContext *deviceContext, ID3D11Texture2D *texture, UINT subresource,
-                           GLsizei width, GLsizei height, const T (&defaultData)[N])
-{
-    D3D11_MAPPED_SUBRESOURCE map;
-    deviceContext->Map(texture, subresource, D3D11_MAP_WRITE, 0, &map);
-
-    unsigned char* ptr = reinterpret_cast<unsigned char*>(map.pData);
-    size_t pixelSize = sizeof(T) * N;
-
-    for (GLsizei y = 0; y < height; y++)
-    {
-        for (GLsizei x = 0; x < width; x++)
-        {
-            memcpy(ptr + (y * map.RowPitch) + (x * pixelSize), defaultData, pixelSize);
-        }
-    }
-
-    deviceContext->Unmap(texture, subresource);
-}
-
-void Image11::createStagingTexture()
-{
-    if (mStagingTexture)
-    {
-        return;
-    }
-
-    ID3D11Texture2D *newTexture = NULL;
-    int lodOffset = 1;
-    const DXGI_FORMAT dxgiFormat = getDXGIFormat();
-    ASSERT(!d3d11::IsDepthStencilFormat(dxgiFormat)); // We should never get here for depth textures
-
-    if (mWidth != 0 && mHeight != 0)
-    {
-        GLsizei width = mWidth;
-        GLsizei height = mHeight;
-
-        // adjust size if needed for compressed textures
-        gl::MakeValidSize(false, d3d11::IsCompressed(dxgiFormat), &width, &height, &lodOffset);
-        ID3D11Device *device = mRenderer->getDevice();
-
-        D3D11_TEXTURE2D_DESC desc;
-        desc.Width = width;
-        desc.Height = height;
-        desc.MipLevels = lodOffset + 1;
-        desc.ArraySize = 1;
-        desc.Format = dxgiFormat;
-        desc.SampleDesc.Count = 1;
-        desc.SampleDesc.Quality = 0;
-        desc.Usage = D3D11_USAGE_STAGING;
-        desc.BindFlags = 0;
-        desc.CPUAccessFlags = D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE;
-        desc.MiscFlags = 0;
-
-        HRESULT result = device->CreateTexture2D(&desc, NULL, &newTexture);
-
-        if (FAILED(result))
-        {
-            ASSERT(result == E_OUTOFMEMORY);
-            ERR("Creating image failed.");
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    mStagingTexture = newTexture;
-    mStagingSubresource = D3D11CalcSubresource(lodOffset, 0, lodOffset + 1);
-    mDirty = false;
-
-    if (mDXGIFormat == DXGI_FORMAT_R8G8B8A8_UNORM && gl::GetAlphaSize(mInternalFormat) == 0)
-    {
-        unsigned char defaultPixel[4] = { 0, 0, 0, 255 };
-        setDefaultData(mRenderer->getDeviceContext(), mStagingTexture, mStagingSubresource, mWidth, mHeight, defaultPixel);
-    }
-    else if (mDXGIFormat == DXGI_FORMAT_R32G32B32A32_FLOAT && gl::GetAlphaSize(mInternalFormat) == 0)
-    {
-        float defaultPixel[4] = { 0.0f, 0.0f, 0.0f, 1.0f };
-        setDefaultData(mRenderer->getDeviceContext(), mStagingTexture, mStagingSubresource, mWidth, mHeight, defaultPixel);
-    }
-}
-
-HRESULT Image11::map(D3D11_MAP mapType, D3D11_MAPPED_SUBRESOURCE *map)
-{
-    createStagingTexture();
-
-    HRESULT result = E_FAIL;
-
-    if (mStagingTexture)
-    {
-        ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
-        result = deviceContext->Map(mStagingTexture, mStagingSubresource, mapType, 0, map);
-
-        // this can fail if the device is removed (from TDR)
-        if (d3d11::isDeviceLostError(result))
-        {
-            mRenderer->notifyDeviceLost();
-        }
-        else if (SUCCEEDED(result))
-        {
-            mDirty = true;
-        }
-    }
-
-    return result;
-}
-
-void Image11::unmap()
-{
-    if (mStagingTexture)
-    {
-        ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
-        deviceContext->Unmap(mStagingTexture, mStagingSubresource);
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.h
deleted file mode 100644
index 11a6492dc8..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.h
+++ /dev/null
@@ -1,76 +0,0 @@
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Image11.h: Defines the rx::Image11 class, which acts as the interface to
-// the actual underlying resources of a Texture
-
-#ifndef LIBGLESV2_RENDERER_IMAGE11_H_
-#define LIBGLESV2_RENDERER_IMAGE11_H_
-
-#include "libGLESv2/renderer/Image.h"
-
-#include "common/debug.h"
-
-namespace gl
-{
-class Framebuffer;
-}
-
-namespace rx
-{
-class Renderer;
-class Renderer11;
-class TextureStorageInterface2D;
-class TextureStorageInterfaceCube;
-
-class Image11 : public Image
-{
-  public:
-    Image11();
-    virtual ~Image11();
-
-    static Image11 *makeImage11(Image *img);
-
-    static void generateMipmap(Image11 *dest, Image11 *src);
-
-    virtual bool isDirty() const;
-
-    virtual bool updateSurface(TextureStorageInterface2D *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-    virtual bool updateSurface(TextureStorageInterfaceCube *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-
-    virtual bool redefine(Renderer *renderer, GLint internalformat, GLsizei width, GLsizei height, bool forceRelease);
-
-    virtual bool isRenderableFormat() const;
-    DXGI_FORMAT getDXGIFormat() const;
-    
-    virtual void loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                  GLint unpackAlignment, const void *input);
-    virtual void loadCompressedData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                                    const void *input);
-
-    virtual void copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
-
-  protected:
-    HRESULT map(D3D11_MAP mapType, D3D11_MAPPED_SUBRESOURCE *map);
-    void unmap();
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(Image11);
-
-    ID3D11Texture2D *getStagingTexture();
-    unsigned int getStagingSubresource();
-    void createStagingTexture();
-
-    Renderer11 *mRenderer;
-
-    DXGI_FORMAT mDXGIFormat;
-    ID3D11Texture2D *mStagingTexture;
-    unsigned int mStagingSubresource;
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_IMAGE11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/IndexBuffer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/IndexBuffer11.cpp
deleted file mode 100644
index 44f9976d43..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/IndexBuffer11.cpp
+++ /dev/null
@@ -1,183 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// IndexBuffer11.cpp: Defines the D3D11 IndexBuffer implementation.
-
-#include "libGLESv2/renderer/d3d11/IndexBuffer11.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-
-namespace rx
-{
-
-IndexBuffer11::IndexBuffer11(Renderer11 *const renderer) : mRenderer(renderer)
-{
-    mBuffer = NULL;
-    mBufferSize = 0;
-    mDynamicUsage = false;
-}
-
-IndexBuffer11::~IndexBuffer11()
-{
-    if (mBuffer)
-    {
-        mBuffer->Release();
-        mBuffer = NULL;
-    }
-}
-
-bool IndexBuffer11::initialize(unsigned int bufferSize, GLenum indexType, bool dynamic)
-{
-    if (mBuffer)
-    {
-        mBuffer->Release();
-        mBuffer = NULL;
-    }
-
-    updateSerial();
-
-    if (bufferSize > 0)
-    {
-        ID3D11Device* dxDevice = mRenderer->getDevice();
-
-        D3D11_BUFFER_DESC bufferDesc;
-        bufferDesc.ByteWidth = bufferSize;
-        bufferDesc.Usage = D3D11_USAGE_DYNAMIC;
-        bufferDesc.BindFlags = D3D11_BIND_INDEX_BUFFER;
-        bufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
-        bufferDesc.MiscFlags = 0;
-        bufferDesc.StructureByteStride = 0;
-
-        HRESULT result = dxDevice->CreateBuffer(&bufferDesc, NULL, &mBuffer);
-        if (FAILED(result))
-        {
-            return false;
-        }
-    }
-
-    mBufferSize = bufferSize;
-    mIndexType = indexType;
-    mDynamicUsage = dynamic;
-
-    return true;
-}
-
-IndexBuffer11 *IndexBuffer11::makeIndexBuffer11(IndexBuffer *indexBuffer)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(IndexBuffer11*, indexBuffer));
-    return static_cast<IndexBuffer11*>(indexBuffer);
-}
-
-bool IndexBuffer11::mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory)
-{
-    if (mBuffer)
-    {
-        // Check for integer overflows and out-out-bounds map requests
-        if (offset + size < offset || offset + size > mBufferSize)
-        {
-            ERR("Index buffer map range is not inside the buffer.");
-            return false;
-        }
-
-        ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
-
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_NO_OVERWRITE, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            ERR("Index buffer map failed with error 0x%08x", result);
-            return false;
-        }
-
-        *outMappedMemory = reinterpret_cast<char*>(mappedResource.pData) + offset;
-        return true;
-    }
-    else
-    {
-        ERR("Index buffer not initialized.");
-        return false;
-    }
-}
-
-bool IndexBuffer11::unmapBuffer()
-{
-    if (mBuffer)
-    {
-        ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
-        dxContext->Unmap(mBuffer, 0);
-        return true;
-    }
-    else
-    {
-        ERR("Index buffer not initialized.");
-        return false;
-    }
-}
-
-GLenum IndexBuffer11::getIndexType() const
-{
-    return mIndexType;
-}
-
-unsigned int IndexBuffer11::getBufferSize() const
-{
-    return mBufferSize;
-}
-
-bool IndexBuffer11::setSize(unsigned int bufferSize, GLenum indexType)
-{
-    if (bufferSize > mBufferSize || indexType != mIndexType)
-    {
-        return initialize(bufferSize, indexType, mDynamicUsage);
-    }
-    else
-    {
-        return true;
-    }
-}
-
-bool IndexBuffer11::discard()
-{
-    if (mBuffer)
-    {
-        ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
-
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            ERR("Index buffer map failed with error 0x%08x", result);
-            return false;
-        }
-
-        dxContext->Unmap(mBuffer, 0);
-
-        return true;
-    }
-    else
-    {
-        ERR("Index buffer not initialized.");
-        return false;
-    }
-}
-
-DXGI_FORMAT IndexBuffer11::getIndexFormat() const
-{
-    switch (mIndexType)
-    {
-      case GL_UNSIGNED_BYTE:    return DXGI_FORMAT_R16_UINT;
-      case GL_UNSIGNED_SHORT:   return DXGI_FORMAT_R16_UINT;
-      case GL_UNSIGNED_INT:     return DXGI_FORMAT_R32_UINT;
-      default: UNREACHABLE();   return DXGI_FORMAT_UNKNOWN;
-    }
-}
-
-ID3D11Buffer *IndexBuffer11::getBuffer() const
-{
-    return mBuffer;
-}
-
-}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Query11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Query11.cpp
deleted file mode 100644
index 24c0330a1e..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Query11.cpp
+++ /dev/null
@@ -1,122 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Query11.cpp: Defines the rx::Query11 class which implements rx::QueryImpl.
-
-#include "libGLESv2/renderer/d3d11/Query11.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-#include "libGLESv2/main.h"
-
-namespace rx
-{
-
-Query11::Query11(rx::Renderer11 *renderer, GLenum type) : QueryImpl(type)
-{
-    mRenderer = renderer;
-    mQuery = NULL;
-}
-
-Query11::~Query11()
-{
-    if (mQuery)
-    {
-        mQuery->Release();
-        mQuery = NULL;
-    }
-}
-
-void Query11::begin()
-{
-    if (mQuery == NULL)
-    {
-        D3D11_QUERY_DESC queryDesc;
-        queryDesc.Query = D3D11_QUERY_OCCLUSION;
-        queryDesc.MiscFlags = 0;
-
-        if (FAILED(mRenderer->getDevice()->CreateQuery(&queryDesc, &mQuery)))
-        {
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    mRenderer->getDeviceContext()->Begin(mQuery);
-}
-
-void Query11::end()
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    mRenderer->getDeviceContext()->End(mQuery);
-
-    mStatus = GL_FALSE;
-    mResult = GL_FALSE;
-}
-
-GLuint Query11::getResult()
-{
-    if (mQuery != NULL)
-    {
-        while (!testQuery())
-        {
-            Sleep(0);
-            // explicitly check for device loss, some drivers seem to return S_FALSE
-            // if the device is lost
-            if (mRenderer->testDeviceLost(true))
-            {
-                return gl::error(GL_OUT_OF_MEMORY, 0);
-            }
-        }
-    }
-
-    return mResult;
-}
-
-GLboolean Query11::isResultAvailable()
-{
-    if (mQuery != NULL)
-    {
-        testQuery();
-    }
-
-    return mStatus;
-}
-
-GLboolean Query11::testQuery()
-{
-    if (mQuery != NULL && mStatus != GL_TRUE)
-    {
-        UINT64 numPixels = 0;
-        HRESULT result = mRenderer->getDeviceContext()->GetData(mQuery, &numPixels, sizeof(UINT64), 0);
-        if (result == S_OK)
-        {
-            mStatus = GL_TRUE;
-
-            switch (getType())
-            {
-              case GL_ANY_SAMPLES_PASSED_EXT:
-              case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
-                mResult = (numPixels > 0) ? GL_TRUE : GL_FALSE;
-                break;
-              default:
-                UNREACHABLE();
-            }
-        }
-        else if (mRenderer->testDeviceLost(true))
-        {
-            return gl::error(GL_OUT_OF_MEMORY, GL_TRUE);
-        }
-
-        return mStatus;
-    }
-
-    return GL_TRUE; // prevent blocking when query is null
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
deleted file mode 100644
index e70727c65e..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
+++ /dev/null
@@ -1,3736 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Renderer11.cpp: Implements a back-end specific class for the D3D11 renderer.
-
-#include "libGLESv2/main.h"
-#include "libGLESv2/utilities.h"
-#include "libGLESv2/Buffer.h"
-#include "libGLESv2/ProgramBinary.h"
-#include "libGLESv2/Framebuffer.h"
-#include "libGLESv2/Renderbuffer.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-#include "libGLESv2/renderer/d3d11/RenderTarget11.h"
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
-#include "libGLESv2/renderer/d3d11/ShaderExecutable11.h"
-#include "libGLESv2/renderer/d3d11/SwapChain11.h"
-#include "libGLESv2/renderer/d3d11/Image11.h"
-#include "libGLESv2/renderer/d3d11/VertexBuffer11.h"
-#include "libGLESv2/renderer/d3d11/IndexBuffer11.h"
-#include "libGLESv2/renderer/d3d11/BufferStorage11.h"
-#include "libGLESv2/renderer/VertexDataManager.h"
-#include "libGLESv2/renderer/IndexDataManager.h"
-#include "libGLESv2/renderer/d3d11/TextureStorage11.h"
-#include "libGLESv2/renderer/d3d11/Query11.h"
-#include "libGLESv2/renderer/d3d11/Fence11.h"
-
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthrough11vs.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthroughrgba11ps.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthroughrgb11ps.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthroughlum11ps.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/passthroughlumalpha11ps.h"
-
-#include "libGLESv2/renderer/d3d11/shaders/compiled/clear11vs.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/clearsingle11ps.h"
-#include "libGLESv2/renderer/d3d11/shaders/compiled/clearmultiple11ps.h"
-
-#include "libEGL/Display.h"
-
-#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-#  include <dxgi1_3.h>
-#  include <wrl.h>
-#  include <windows.applicationmodel.core.h>
-typedef ABI::Windows::Foundation::IEventHandler<ABI::Windows::ApplicationModel::SuspendingEventArgs *> SuspendEventHandler;
-#endif
-
-#ifdef _DEBUG
-// this flag enables suppressing some spurious warnings that pop up in certain WebGL samples
-// and conformance tests. to enable all warnings, remove this define.
-#define ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS 1
-#endif
-
-namespace rx
-{
-static const DXGI_FORMAT RenderTargetFormats[] =
-    {
-        DXGI_FORMAT_B8G8R8A8_UNORM,
-        DXGI_FORMAT_R8G8B8A8_UNORM
-    };
-
-static const DXGI_FORMAT DepthStencilFormats[] =
-    {
-        DXGI_FORMAT_UNKNOWN,
-        DXGI_FORMAT_D24_UNORM_S8_UINT,
-        DXGI_FORMAT_D16_UNORM
-    };
-
-enum
-{
-    MAX_TEXTURE_IMAGE_UNITS_VTF_SM4 = 16
-};
-
-Renderer11::Renderer11(egl::Display *display) : Renderer(display)
-{
-    mVertexDataManager = NULL;
-    mIndexDataManager = NULL;
-
-    mLineLoopIB = NULL;
-    mTriangleFanIB = NULL;
-
-    mCopyResourcesInitialized = false;
-    mCopyVB = NULL;
-    mCopySampler = NULL;
-    mCopyIL = NULL;
-    mCopyVS = NULL;
-    mCopyRGBAPS = NULL;
-    mCopyRGBPS = NULL;
-    mCopyLumPS = NULL;
-    mCopyLumAlphaPS = NULL;
-
-    mClearResourcesInitialized = false;
-    mClearVB = NULL;
-    mClearIL = NULL;
-    mClearVS = NULL;
-    mClearSinglePS = NULL;
-    mClearMultiplePS = NULL;
-    mClearScissorRS = NULL;
-    mClearNoScissorRS = NULL;
-
-    mSyncQuery = NULL;
-
-    mD3d11Module = NULL;
-    mDxgiModule = NULL;
-
-    mDeviceLost = false;
-
-    mMaxSupportedSamples = 0;
-
-    mDevice = NULL;
-    mDeviceContext = NULL;
-    mDxgiAdapter = NULL;
-    mDxgiFactory = NULL;
-
-    mDriverConstantBufferVS = NULL;
-    mDriverConstantBufferPS = NULL;
-
-    mBGRATextureSupport = false;
-
-    mIsGeometryShaderActive = false;
-}
-
-Renderer11::~Renderer11()
-{
-    release();
-}
-
-Renderer11 *Renderer11::makeRenderer11(Renderer *renderer)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(rx::Renderer11*, renderer));
-    return static_cast<rx::Renderer11*>(renderer);
-}
-
-#ifndef __d3d11_1_h__
-#define D3D11_MESSAGE_ID_DEVICE_DRAW_RENDERTARGETVIEW_NOT_SET ((D3D11_MESSAGE_ID)3146081)
-#endif
-
-EGLint Renderer11::initialize()
-{
-    if (!initializeCompiler())
-    {
-        return EGL_NOT_INITIALIZED;
-    }
-
-#if !defined(ANGLE_OS_WINRT)
-    mDxgiModule = LoadLibrary(TEXT("dxgi.dll"));
-    mD3d11Module = LoadLibrary(TEXT("d3d11.dll"));
-
-    if (mD3d11Module == NULL || mDxgiModule == NULL)
-    {
-        ERR("Could not load D3D11 or DXGI library - aborting!\n");
-        return EGL_NOT_INITIALIZED;
-    }
-
-
-    // create the D3D11 device
-    ASSERT(mDevice == NULL);
-    PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = (PFN_D3D11_CREATE_DEVICE)GetProcAddress(mD3d11Module, "D3D11CreateDevice");
-
-    if (D3D11CreateDevice == NULL)
-    {
-        ERR("Could not retrieve D3D11CreateDevice address - aborting!\n");
-        return EGL_NOT_INITIALIZED;
-    }
-#endif
-
-    D3D_FEATURE_LEVEL featureLevels[] =
-    {
-        D3D_FEATURE_LEVEL_11_0,
-        D3D_FEATURE_LEVEL_10_1,
-        D3D_FEATURE_LEVEL_10_0,
-#if !defined(ANGLE_ENABLE_D3D9)
-        D3D_FEATURE_LEVEL_9_3,
-        D3D_FEATURE_LEVEL_9_2,
-        D3D_FEATURE_LEVEL_9_1,
-#endif
-    };
-
-    HRESULT result = S_OK;
-
-#ifdef _DEBUG
-    result = D3D11CreateDevice(NULL,
-                               D3D_DRIVER_TYPE_HARDWARE,
-                               NULL,
-                               D3D11_CREATE_DEVICE_DEBUG,
-                               featureLevels,
-                               ArraySize(featureLevels),
-                               D3D11_SDK_VERSION,
-                               &mDevice,
-                               &mFeatureLevel,
-                               &mDeviceContext);
-
-    if (!mDevice || FAILED(result))
-    {
-        ERR("Failed creating Debug D3D11 device - falling back to release runtime.\n");
-    }
-
-    if (!mDevice || FAILED(result))
-#endif
-    {
-        result = D3D11CreateDevice(NULL,
-                                   D3D_DRIVER_TYPE_HARDWARE,
-                                   NULL,
-                                   0,
-                                   featureLevels,
-                                   ArraySize(featureLevels),
-                                   D3D11_SDK_VERSION,
-                                   &mDevice,
-                                   &mFeatureLevel,
-                                   &mDeviceContext);
-
-        if (!mDevice || FAILED(result))
-        {
-            ERR("Could not create D3D11 device - aborting!\n");
-            return EGL_NOT_INITIALIZED;   // Cleanup done by destructor through glDestroyRenderer
-        }
-    }
-
-#if !defined(ANGLE_OS_WINRT)
-    IDXGIDevice *dxgiDevice = NULL;
-#else
-    IDXGIDevice1 *dxgiDevice = NULL;
-#endif
-    result = mDevice->QueryInterface(IID_PPV_ARGS(&dxgiDevice));
-
-    if (FAILED(result))
-    {
-        ERR("Could not query DXGI device - aborting!\n");
-        return EGL_NOT_INITIALIZED;
-    }
-
-    result = dxgiDevice->GetParent(__uuidof(IDXGIAdapter), (void**)&mDxgiAdapter);
-
-    if (FAILED(result))
-    {
-        ERR("Could not retrieve DXGI adapter - aborting!\n");
-        return EGL_NOT_INITIALIZED;
-    }
-
-    dxgiDevice->Release();
-
-    mDxgiAdapter->GetDesc(&mAdapterDescription);
-    memset(mDescription, 0, sizeof(mDescription));
-    wcstombs(mDescription, mAdapterDescription.Description, sizeof(mDescription) - 1);
-
-    result = mDxgiAdapter->GetParent(__uuidof(IDXGIFactory), (void**)&mDxgiFactory);
-
-    if (!mDxgiFactory || FAILED(result))
-    {
-        ERR("Could not create DXGI factory - aborting!\n");
-        return EGL_NOT_INITIALIZED;
-    }
-
-    // Disable some spurious D3D11 debug warnings to prevent them from flooding the output log
-#if defined(ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS) && defined(_DEBUG)
-    ID3D11InfoQueue *infoQueue;
-    result = mDevice->QueryInterface(__uuidof(ID3D11InfoQueue),  (void **)&infoQueue);
-
-    if (SUCCEEDED(result))
-    {
-        D3D11_MESSAGE_ID hideMessages[] =
-        {
-            D3D11_MESSAGE_ID_DEVICE_DRAW_RENDERTARGETVIEW_NOT_SET
-        };
-
-        D3D11_INFO_QUEUE_FILTER filter = {0};
-        filter.DenyList.NumIDs = ArraySize(hideMessages);
-        filter.DenyList.pIDList = hideMessages;
-
-        infoQueue->AddStorageFilterEntries(&filter);
-
-        infoQueue->Release();
-    }
-#endif
-
-    unsigned int maxSupportedSamples = 0;
-    unsigned int rtFormatCount = ArraySize(RenderTargetFormats);
-    unsigned int dsFormatCount = ArraySize(DepthStencilFormats);
-    for (unsigned int i = 0; i < rtFormatCount + dsFormatCount; ++i)
-    {
-        DXGI_FORMAT format = (i < rtFormatCount) ? RenderTargetFormats[i] : DepthStencilFormats[i - rtFormatCount];
-        if (format != DXGI_FORMAT_UNKNOWN)
-        {
-            UINT formatSupport;
-            result = mDevice->CheckFormatSupport(format, &formatSupport);
-            if (SUCCEEDED(result) && (formatSupport & D3D11_FORMAT_SUPPORT_MULTISAMPLE_RENDERTARGET))
-            {
-                MultisampleSupportInfo supportInfo;
-
-                for (unsigned int j = 1; j <= D3D11_MAX_MULTISAMPLE_SAMPLE_COUNT; j++)
-                {
-                    result = mDevice->CheckMultisampleQualityLevels(format, j, &supportInfo.qualityLevels[j - 1]);
-                    if (SUCCEEDED(result) && supportInfo.qualityLevels[j - 1] > 0)
-                    {
-                        maxSupportedSamples = std::max(j, maxSupportedSamples);
-                    }
-                    else
-                    {
-                        supportInfo.qualityLevels[j - 1] = 0;
-                    }
-                }
-
-                mMultisampleSupportMap.insert(std::make_pair(format, supportInfo));
-            }
-        }
-    }
-    mMaxSupportedSamples = maxSupportedSamples;
-
-    initializeDevice();
-
-    // BGRA texture support is optional in feature levels 10 and 10_1
-    UINT formatSupport;
-    result = mDevice->CheckFormatSupport(DXGI_FORMAT_B8G8R8A8_UNORM, &formatSupport);
-    if (FAILED(result))
-    {
-        ERR("Error checking BGRA format support: 0x%08X", result);
-    }
-    else
-    {
-        const int flags = (D3D11_FORMAT_SUPPORT_TEXTURE2D | D3D11_FORMAT_SUPPORT_RENDER_TARGET);
-        mBGRATextureSupport = (formatSupport & flags) == flags;
-    }
-
-    // Check floating point texture support
-    static const unsigned int requiredTextureFlags = D3D11_FORMAT_SUPPORT_TEXTURE2D | D3D11_FORMAT_SUPPORT_TEXTURECUBE;
-    static const unsigned int requiredRenderableFlags = D3D11_FORMAT_SUPPORT_RENDER_TARGET;
-    static const unsigned int requiredFilterFlags = D3D11_FORMAT_SUPPORT_SHADER_SAMPLE;
-
-    DXGI_FORMAT float16Formats[] =
-    {
-        DXGI_FORMAT_R16_FLOAT,
-        DXGI_FORMAT_R16G16_FLOAT,
-        DXGI_FORMAT_R16G16B16A16_FLOAT,
-    };
-
-    DXGI_FORMAT float32Formats[] =
-    {
-        DXGI_FORMAT_R32_FLOAT,
-        DXGI_FORMAT_R32G32_FLOAT,
-        DXGI_FORMAT_R32G32B32A32_FLOAT,
-    };
-
-    mFloat16TextureSupport = true;
-    mFloat16FilterSupport = true;
-    mFloat16RenderSupport = true;
-    for (unsigned int i = 0; i < ArraySize(float16Formats); i++)
-    {
-        if (SUCCEEDED(mDevice->CheckFormatSupport(float16Formats[i], &formatSupport)))
-        {
-            mFloat16TextureSupport = mFloat16TextureSupport && (formatSupport & requiredTextureFlags) == requiredTextureFlags;
-            mFloat16FilterSupport = mFloat16FilterSupport && (formatSupport & requiredFilterFlags) == requiredFilterFlags;
-            mFloat16RenderSupport = mFloat16RenderSupport && (formatSupport & requiredRenderableFlags) == requiredRenderableFlags;
-        }
-        else
-        {
-            mFloat16TextureSupport = false;
-            mFloat16RenderSupport = false;
-            mFloat16FilterSupport = false;
-        }
-    }
-
-    mFloat32TextureSupport = true;
-    mFloat32FilterSupport = true;
-    mFloat32RenderSupport = true;
-    for (unsigned int i = 0; i < ArraySize(float32Formats); i++)
-    {
-        if (SUCCEEDED(mDevice->CheckFormatSupport(float32Formats[i], &formatSupport)))
-        {
-            mFloat32TextureSupport = mFloat32TextureSupport && (formatSupport & requiredTextureFlags) == requiredTextureFlags;
-            mFloat32FilterSupport = mFloat32FilterSupport && (formatSupport & requiredFilterFlags) == requiredFilterFlags;
-            mFloat32RenderSupport = mFloat32RenderSupport && (formatSupport & requiredRenderableFlags) == requiredRenderableFlags;
-        }
-        else
-        {
-            mFloat32TextureSupport = false;
-            mFloat32FilterSupport = false;
-            mFloat32RenderSupport = false;
-        }
-    }
-
-    // Check compressed texture support
-    const unsigned int requiredCompressedTextureFlags = D3D11_FORMAT_SUPPORT_TEXTURE2D;
-
-    if (SUCCEEDED(mDevice->CheckFormatSupport(DXGI_FORMAT_BC1_UNORM, &formatSupport)))
-    {
-        mDXT1TextureSupport = (formatSupport & requiredCompressedTextureFlags) == requiredCompressedTextureFlags;
-    }
-    else
-    {
-        mDXT1TextureSupport = false;
-    }
-
-    if (SUCCEEDED(mDevice->CheckFormatSupport(DXGI_FORMAT_BC3_UNORM, &formatSupport)))
-    {
-        mDXT3TextureSupport = (formatSupport & requiredCompressedTextureFlags) == requiredCompressedTextureFlags;
-    }
-    else
-    {
-        mDXT3TextureSupport = false;
-    }
-
-    if (SUCCEEDED(mDevice->CheckFormatSupport(DXGI_FORMAT_BC5_UNORM, &formatSupport)))
-    {
-        mDXT5TextureSupport = (formatSupport & requiredCompressedTextureFlags) == requiredCompressedTextureFlags;
-    }
-    else
-    {
-        mDXT5TextureSupport = false;
-    }
-
-    // Check depth texture support
-    DXGI_FORMAT depthTextureFormats[] =
-    {
-        DXGI_FORMAT_D16_UNORM,
-        DXGI_FORMAT_D24_UNORM_S8_UINT,
-    };
-
-    static const unsigned int requiredDepthTextureFlags = D3D11_FORMAT_SUPPORT_DEPTH_STENCIL |
-                                                          D3D11_FORMAT_SUPPORT_TEXTURE2D;
-
-    mDepthTextureSupport = true;
-    for (unsigned int i = 0; i < ArraySize(depthTextureFormats); i++)
-    {
-        if (SUCCEEDED(mDevice->CheckFormatSupport(depthTextureFormats[i], &formatSupport)))
-        {
-            mDepthTextureSupport = mDepthTextureSupport && ((formatSupport & requiredDepthTextureFlags) == requiredDepthTextureFlags);
-        }
-        else
-        {
-            mDepthTextureSupport = false;
-        }
-    }
-
-#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-    // Monitor when the application suspends so that Trim() can be called
-    Microsoft::WRL::ComPtr<ABI::Windows::ApplicationModel::Core::ICoreApplication> application;
-    result = RoGetActivationFactory(Microsoft::WRL::Wrappers::HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
-                                    IID_PPV_ARGS(&application));
-    if (FAILED(result))
-    {
-        ERR("Error obtaining CoreApplication: 0x%08X", result);
-        return EGL_NOT_INITIALIZED;
-    }
-
-    EventRegistrationToken cookie;
-    result = application->add_Suspending(Microsoft::WRL::Callback<SuspendEventHandler>(this, &Renderer11::onSuspend).Get(), &cookie);
-    if (FAILED(result))
-    {
-        ERR("Error setting suspend callback: 0x%08X", result);
-        return EGL_NOT_INITIALIZED;
-    }
-#endif
-
-    return EGL_SUCCESS;
-}
-
-#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-HRESULT Renderer11::onSuspend(IInspectable *, ABI::Windows::ApplicationModel::ISuspendingEventArgs *)
-{
-    if (!mDevice)
-        return S_OK;
-
-    Microsoft::WRL::ComPtr<IDXGIDevice3> dxgiDevice;
-    HRESULT result = mDevice->QueryInterface(IID_PPV_ARGS(&dxgiDevice));
-    if (FAILED(result))
-    {
-        ERR("Error obtaining DXGIDevice3 on suspend: 0x%08X", result);
-        return S_OK;
-    }
-
-    dxgiDevice->Trim();
-
-    return S_OK;
-}
-#endif
-
-// do any one-time device initialization
-// NOTE: this is also needed after a device lost/reset
-// to reset the scene status and ensure the default states are reset.
-void Renderer11::initializeDevice()
-{
-    mStateCache.initialize(mDevice);
-    mInputLayoutCache.initialize(mDevice, mDeviceContext);
-
-    ASSERT(!mVertexDataManager && !mIndexDataManager);
-    mVertexDataManager = new VertexDataManager(this);
-    mIndexDataManager = new IndexDataManager(this);
-
-    markAllStateDirty();
-}
-
-int Renderer11::generateConfigs(ConfigDesc **configDescList)
-{
-    unsigned int numRenderFormats = ArraySize(RenderTargetFormats);
-    unsigned int numDepthFormats = ArraySize(DepthStencilFormats);
-    (*configDescList) = new ConfigDesc[numRenderFormats * numDepthFormats];
-    int numConfigs = 0;
-    
-    for (unsigned int formatIndex = 0; formatIndex < numRenderFormats; formatIndex++)
-    {
-        for (unsigned int depthStencilIndex = 0; depthStencilIndex < numDepthFormats; depthStencilIndex++)
-        {
-            DXGI_FORMAT renderTargetFormat = RenderTargetFormats[formatIndex];
-
-            UINT formatSupport = 0;
-            HRESULT result = mDevice->CheckFormatSupport(renderTargetFormat, &formatSupport);
-
-            if (SUCCEEDED(result) && (formatSupport & D3D11_FORMAT_SUPPORT_RENDER_TARGET))
-            {
-                DXGI_FORMAT depthStencilFormat = DepthStencilFormats[depthStencilIndex];
-
-                bool depthStencilFormatOK = true;
-
-                if (depthStencilFormat != DXGI_FORMAT_UNKNOWN)
-                {
-                    UINT formatSupport = 0;
-                    result = mDevice->CheckFormatSupport(depthStencilFormat, &formatSupport);
-                    depthStencilFormatOK = SUCCEEDED(result) && (formatSupport & D3D11_FORMAT_SUPPORT_DEPTH_STENCIL);
-                }
-
-                if (depthStencilFormatOK)
-                {
-                    ConfigDesc newConfig;
-                    newConfig.renderTargetFormat = d3d11_gl::ConvertBackBufferFormat(renderTargetFormat);
-                    newConfig.depthStencilFormat = d3d11_gl::ConvertDepthStencilFormat(depthStencilFormat);
-                    newConfig.multiSample = 0;     // FIXME: enumerate multi-sampling
-                    newConfig.fastConfig = true;   // Assume all DX11 format conversions to be fast
-
-                    (*configDescList)[numConfigs++] = newConfig;
-                }
-            }
-        }
-    }
-
-    return numConfigs;
-}
-
-void Renderer11::deleteConfigs(ConfigDesc *configDescList)
-{
-    delete [] (configDescList);
-}
-
-void Renderer11::sync(bool block)
-{
-    if (block)
-    {
-        HRESULT result;
-
-        if (!mSyncQuery)
-        {
-            D3D11_QUERY_DESC queryDesc;
-            queryDesc.Query = D3D11_QUERY_EVENT;
-            queryDesc.MiscFlags = 0;
-
-            result = mDevice->CreateQuery(&queryDesc, &mSyncQuery);
-            ASSERT(SUCCEEDED(result));
-        }
-
-        mDeviceContext->End(mSyncQuery);
-        mDeviceContext->Flush();
-
-        do
-        {
-            result = mDeviceContext->GetData(mSyncQuery, NULL, 0, D3D11_ASYNC_GETDATA_DONOTFLUSH);
-
-            // Keep polling, but allow other threads to do something useful first
-            Sleep(0);
-
-            if (testDeviceLost(true))
-            {
-                return;
-            }
-        }
-        while (result == S_FALSE);
-    }
-    else
-    {
-        mDeviceContext->Flush();
-    }
-}
-
-SwapChain *Renderer11::createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat)
-{
-    return new rx::SwapChain11(this, window, shareHandle, backBufferFormat, depthBufferFormat);
-}
-
-void Renderer11::setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &samplerState)
-{
-    if (type == gl::SAMPLER_PIXEL)
-    {
-        if (index < 0 || index >= gl::MAX_TEXTURE_IMAGE_UNITS)
-        {
-            ERR("Pixel shader sampler index %i is not valid.", index);
-            return;
-        }
-
-        if (mForceSetPixelSamplerStates[index] || memcmp(&samplerState, &mCurPixelSamplerStates[index], sizeof(gl::SamplerState)) != 0)
-        {
-            ID3D11SamplerState *dxSamplerState = mStateCache.getSamplerState(samplerState);
-
-            if (!dxSamplerState)
-            {
-                ERR("NULL sampler state returned by RenderStateCache::getSamplerState, setting the default"
-                    "sampler state for pixel shaders at slot %i.", index);
-            }
-
-            mDeviceContext->PSSetSamplers(index, 1, &dxSamplerState);
-
-            mCurPixelSamplerStates[index] = samplerState;
-        }
-
-        mForceSetPixelSamplerStates[index] = false;
-    }
-    else if (type == gl::SAMPLER_VERTEX)
-    {
-        if (index < 0 || index >= (int)getMaxVertexTextureImageUnits())
-        {
-            ERR("Vertex shader sampler index %i is not valid.", index);
-            return;
-        }
-
-        if (mForceSetVertexSamplerStates[index] || memcmp(&samplerState, &mCurVertexSamplerStates[index], sizeof(gl::SamplerState)) != 0)
-        {
-            ID3D11SamplerState *dxSamplerState = mStateCache.getSamplerState(samplerState);
-
-            if (!dxSamplerState)
-            {
-                ERR("NULL sampler state returned by RenderStateCache::getSamplerState, setting the default"
-                    "sampler state for vertex shaders at slot %i.", index);
-            }
-
-            mDeviceContext->VSSetSamplers(index, 1, &dxSamplerState);
-
-            mCurVertexSamplerStates[index] = samplerState;
-        }
-
-        mForceSetVertexSamplerStates[index] = false;
-    }
-    else UNREACHABLE();
-}
-
-void Renderer11::setTexture(gl::SamplerType type, int index, gl::Texture *texture)
-{
-    ID3D11ShaderResourceView *textureSRV = NULL;
-    unsigned int serial = 0;
-    bool forceSetTexture = false;
-
-    if (texture)
-    {
-        TextureStorageInterface *texStorage = texture->getNativeTexture();
-        if (texStorage)
-        {
-            TextureStorage11 *storage11 = TextureStorage11::makeTextureStorage11(texStorage->getStorageInstance());
-            textureSRV = storage11->getSRV();
-        }
-
-        // If we get NULL back from getSRV here, something went wrong in the texture class and we're unexpectedly
-        // missing the shader resource view
-        ASSERT(textureSRV != NULL);
-
-        serial = texture->getTextureSerial();
-        forceSetTexture = texture->hasDirtyImages();
-    }
-
-    if (type == gl::SAMPLER_PIXEL)
-    {
-        if (index < 0 || index >= gl::MAX_TEXTURE_IMAGE_UNITS)
-        {
-            ERR("Pixel shader sampler index %i is not valid.", index);
-            return;
-        }
-
-        if (forceSetTexture || mCurPixelTextureSerials[index] != serial)
-        {
-            mDeviceContext->PSSetShaderResources(index, 1, &textureSRV);
-        }
-
-        mCurPixelTextureSerials[index] = serial;
-    }
-    else if (type == gl::SAMPLER_VERTEX)
-    {
-        if (index < 0 || index >= (int)getMaxVertexTextureImageUnits())
-        {
-            ERR("Vertex shader sampler index %i is not valid.", index);
-            return;
-        }
-
-        if (forceSetTexture || mCurVertexTextureSerials[index] != serial)
-        {
-            mDeviceContext->VSSetShaderResources(index, 1, &textureSRV);
-        }
-
-        mCurVertexTextureSerials[index] = serial;
-    }
-    else UNREACHABLE();
-}
-
-void Renderer11::setRasterizerState(const gl::RasterizerState &rasterState)
-{
-    if (mForceSetRasterState || memcmp(&rasterState, &mCurRasterState, sizeof(gl::RasterizerState)) != 0)
-    {
-        ID3D11RasterizerState *dxRasterState = mStateCache.getRasterizerState(rasterState, mScissorEnabled,
-                                                                              mCurDepthSize);
-        if (!dxRasterState)
-        {
-            ERR("NULL rasterizer state returned by RenderStateCache::getRasterizerState, setting the default"
-                "rasterizer state.");
-        }
-
-        mDeviceContext->RSSetState(dxRasterState);
-
-        mCurRasterState = rasterState;
-    }
-
-    mForceSetRasterState = false;
-}
-
-void Renderer11::setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::Color &blendColor,
-                               unsigned int sampleMask)
-{
-    if (mForceSetBlendState ||
-        memcmp(&blendState, &mCurBlendState, sizeof(gl::BlendState)) != 0 ||
-        memcmp(&blendColor, &mCurBlendColor, sizeof(gl::Color)) != 0 ||
-        sampleMask != mCurSampleMask)
-    {
-        ID3D11BlendState *dxBlendState = mStateCache.getBlendState(framebuffer, blendState);
-        if (!dxBlendState)
-        {
-            ERR("NULL blend state returned by RenderStateCache::getBlendState, setting the default "
-                "blend state.");
-        }
-
-        float blendColors[4] = {0.0f};
-        if (blendState.sourceBlendRGB != GL_CONSTANT_ALPHA && blendState.sourceBlendRGB != GL_ONE_MINUS_CONSTANT_ALPHA &&
-            blendState.destBlendRGB != GL_CONSTANT_ALPHA && blendState.destBlendRGB != GL_ONE_MINUS_CONSTANT_ALPHA)
-        {
-            blendColors[0] = blendColor.red;
-            blendColors[1] = blendColor.green;
-            blendColors[2] = blendColor.blue;
-            blendColors[3] = blendColor.alpha;
-        }
-        else
-        {
-            blendColors[0] = blendColor.alpha;
-            blendColors[1] = blendColor.alpha;
-            blendColors[2] = blendColor.alpha;
-            blendColors[3] = blendColor.alpha;
-        }
-
-        mDeviceContext->OMSetBlendState(dxBlendState, blendColors, sampleMask);
-
-        mCurBlendState = blendState;
-        mCurBlendColor = blendColor;
-        mCurSampleMask = sampleMask;
-    }
-
-    mForceSetBlendState = false;
-}
-
-void Renderer11::setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
-                                      int stencilBackRef, bool frontFaceCCW)
-{
-    if (mForceSetDepthStencilState ||
-        memcmp(&depthStencilState, &mCurDepthStencilState, sizeof(gl::DepthStencilState)) != 0 ||
-        stencilRef != mCurStencilRef || stencilBackRef != mCurStencilBackRef)
-    {
-        if (depthStencilState.stencilWritemask != depthStencilState.stencilBackWritemask ||
-            stencilRef != stencilBackRef ||
-            depthStencilState.stencilMask != depthStencilState.stencilBackMask)
-        {
-            ERR("Separate front/back stencil writemasks, reference values, or stencil mask values are "
-                "invalid under WebGL.");
-            return gl::error(GL_INVALID_OPERATION);
-        }
-
-        ID3D11DepthStencilState *dxDepthStencilState = mStateCache.getDepthStencilState(depthStencilState);
-        if (!dxDepthStencilState)
-        {
-            ERR("NULL depth stencil state returned by RenderStateCache::getDepthStencilState, "
-                "setting the default depth stencil state.");
-        }
-
-        mDeviceContext->OMSetDepthStencilState(dxDepthStencilState, static_cast<UINT>(stencilRef));
-
-        mCurDepthStencilState = depthStencilState;
-        mCurStencilRef = stencilRef;
-        mCurStencilBackRef = stencilBackRef;
-    }
-
-    mForceSetDepthStencilState = false;
-}
-
-void Renderer11::setScissorRectangle(const gl::Rectangle &scissor, bool enabled)
-{
-    if (mForceSetScissor || memcmp(&scissor, &mCurScissor, sizeof(gl::Rectangle)) != 0 ||
-        enabled != mScissorEnabled)
-    {
-        if (enabled)
-        {
-            D3D11_RECT rect;
-            rect.left = std::max(0, scissor.x);
-            rect.top = std::max(0, scissor.y);
-            rect.right = scissor.x + std::max(0, scissor.width);
-            rect.bottom = scissor.y + std::max(0, scissor.height);
-
-            mDeviceContext->RSSetScissorRects(1, &rect);
-        }
-
-        if (enabled != mScissorEnabled)
-        {
-            mForceSetRasterState = true;
-        }
-
-        mCurScissor = scissor;
-        mScissorEnabled = enabled;
-    }
-
-    mForceSetScissor = false;
-}
-
-bool Renderer11::setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace, 
-                             bool ignoreViewport)
-{
-    gl::Rectangle actualViewport = viewport;
-    float actualZNear = gl::clamp01(zNear);
-    float actualZFar = gl::clamp01(zFar);
-    if (ignoreViewport)
-    {
-        actualViewport.x = 0;
-        actualViewport.y = 0;
-        actualViewport.width = mRenderTargetDesc.width;
-        actualViewport.height = mRenderTargetDesc.height;
-        actualZNear = 0.0f;
-        actualZFar = 1.0f;
-    }
-
-    // Get D3D viewport bounds, which depends on the feature level
-    const Range& viewportBounds = getViewportBounds();
-
-    // Clamp width and height first to the gl maximum, then clamp further if we extend past the D3D maximum bounds
-    D3D11_VIEWPORT dxViewport;
-    dxViewport.TopLeftX = gl::clamp(actualViewport.x, viewportBounds.start, viewportBounds.end);
-    dxViewport.TopLeftY = gl::clamp(actualViewport.y, viewportBounds.start, viewportBounds.end);
-    dxViewport.Width = gl::clamp(actualViewport.width, 0, getMaxViewportDimension());
-    dxViewport.Height = gl::clamp(actualViewport.height, 0, getMaxViewportDimension());
-    dxViewport.Width = std::min((int)dxViewport.Width, viewportBounds.end - static_cast<int>(dxViewport.TopLeftX));
-    dxViewport.Height = std::min((int)dxViewport.Height, viewportBounds.end - static_cast<int>(dxViewport.TopLeftY));
-    dxViewport.MinDepth = actualZNear;
-    dxViewport.MaxDepth = actualZFar;
-
-    if (dxViewport.Width <= 0 || dxViewport.Height <= 0)
-    {
-        return false;   // Nothing to render
-    }
-
-    bool viewportChanged = mForceSetViewport || memcmp(&actualViewport, &mCurViewport, sizeof(gl::Rectangle)) != 0 ||
-                           actualZNear != mCurNear || actualZFar != mCurFar;
-
-    if (viewportChanged)
-    {
-        mDeviceContext->RSSetViewports(1, &dxViewport);
-
-        mCurViewport = actualViewport;
-        mCurNear = actualZNear;
-        mCurFar = actualZFar;
-
-        mPixelConstants.viewCoords[0] = actualViewport.width  * 0.5f;
-        mPixelConstants.viewCoords[1] = actualViewport.height * 0.5f;
-        mPixelConstants.viewCoords[2] = actualViewport.x + (actualViewport.width  * 0.5f);
-        mPixelConstants.viewCoords[3] = actualViewport.y + (actualViewport.height * 0.5f);
-
-        mPixelConstants.depthFront[0] = (actualZFar - actualZNear) * 0.5f;
-        mPixelConstants.depthFront[1] = (actualZNear + actualZFar) * 0.5f;
-
-        mVertexConstants.depthRange[0] = actualZNear;
-        mVertexConstants.depthRange[1] = actualZFar;
-        mVertexConstants.depthRange[2] = actualZFar - actualZNear;
-
-        mPixelConstants.depthRange[0] = actualZNear;
-        mPixelConstants.depthRange[1] = actualZFar;
-        mPixelConstants.depthRange[2] = actualZFar - actualZNear;
-    }
-
-    mForceSetViewport = false;
-    return true;
-}
-
-bool Renderer11::applyPrimitiveType(GLenum mode, GLsizei count)
-{
-    D3D11_PRIMITIVE_TOPOLOGY primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_UNDEFINED;
-
-    GLsizei minCount = 0;
-
-    switch (mode)
-    {
-      case GL_POINTS:         primitiveTopology = D3D11_PRIMITIVE_TOPOLOGY_POINTLIST;   minCount = 1; break;
-      case GL_LINES:          primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINELIST;      minCount = 2; break;
-      case GL_LINE_LOOP:      primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINESTRIP;     minCount = 2; break;
-      case GL_LINE_STRIP:     primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINESTRIP;     minCount = 2; break;
-      case GL_TRIANGLES:      primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST;  minCount = 3; break;
-      case GL_TRIANGLE_STRIP: primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP; minCount = 3; break;
-          // emulate fans via rewriting index buffer
-      case GL_TRIANGLE_FAN:   primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST;  minCount = 3; break;
-      default:
-        return gl::error(GL_INVALID_ENUM, false);
-    }
-
-    if (primitiveTopology != mCurrentPrimitiveTopology)
-    {
-        mDeviceContext->IASetPrimitiveTopology(primitiveTopology);
-        mCurrentPrimitiveTopology = primitiveTopology;
-    }
-
-    return count >= minCount;
-}
-
-bool Renderer11::applyRenderTarget(gl::Framebuffer *framebuffer)
-{
-    // Get the color render buffer and serial
-    // Also extract the render target dimensions and view
-    unsigned int renderTargetWidth = 0;
-    unsigned int renderTargetHeight = 0;
-    GLenum renderTargetFormat = 0;
-    unsigned int renderTargetSerials[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS] = {0};
-    ID3D11RenderTargetView* framebufferRTVs[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS] = {NULL};
-    bool missingColorRenderTarget = true;
-
-    for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
-    {
-        const GLenum drawBufferState = framebuffer->getDrawBufferState(colorAttachment);
-
-        if (framebuffer->getColorbufferType(colorAttachment) != GL_NONE && drawBufferState != GL_NONE)
-        {
-            // the draw buffer must be either "none", "back" for the default buffer or the same index as this color (in order)
-            ASSERT(drawBufferState == GL_BACK || drawBufferState == (GL_COLOR_ATTACHMENT0_EXT + colorAttachment));
-
-            gl::Renderbuffer *colorbuffer = framebuffer->getColorbuffer(colorAttachment);
-
-            if (!colorbuffer)
-            {
-                ERR("render target pointer unexpectedly null.");
-                return false;
-            }
-
-            // check for zero-sized default framebuffer, which is a special case.
-            // in this case we do not wish to modify any state and just silently return false.
-            // this will not report any gl error but will cause the calling method to return.
-            if (colorbuffer->getWidth() == 0 || colorbuffer->getHeight() == 0)
-            {
-                return false;
-            }
-
-            renderTargetSerials[colorAttachment] = colorbuffer->getSerial();
-
-            // Extract the render target dimensions and view
-            RenderTarget11 *renderTarget = RenderTarget11::makeRenderTarget11(colorbuffer->getRenderTarget());
-            if (!renderTarget)
-            {
-                ERR("render target pointer unexpectedly null.");
-                return false;
-            }
-
-            framebufferRTVs[colorAttachment] = renderTarget->getRenderTargetView();
-            if (!framebufferRTVs[colorAttachment])
-            {
-                ERR("render target view pointer unexpectedly null.");
-                return false;
-            }
-
-            if (missingColorRenderTarget)
-            {
-                renderTargetWidth = colorbuffer->getWidth();
-                renderTargetHeight = colorbuffer->getHeight();
-                renderTargetFormat = colorbuffer->getActualFormat();
-                missingColorRenderTarget = false;
-            }
-
-#ifdef _DEBUG
-            // Workaround for Debug SETSHADERRESOURCES_HAZARD D3D11 warnings
-            for (unsigned int vertexSerialIndex = 0; vertexSerialIndex < gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS; vertexSerialIndex++)
-            {
-                if (colorbuffer->getTextureSerial() != 0 && mCurVertexTextureSerials[vertexSerialIndex] == colorbuffer->getTextureSerial())
-                {
-                    setTexture(gl::SAMPLER_VERTEX, vertexSerialIndex, NULL);
-                }
-            }
-
-            for (unsigned int pixelSerialIndex = 0; pixelSerialIndex < gl::MAX_TEXTURE_IMAGE_UNITS; pixelSerialIndex++)
-            {
-                if (colorbuffer->getTextureSerial() != 0 && mCurPixelTextureSerials[pixelSerialIndex] == colorbuffer->getTextureSerial())
-                {
-                    setTexture(gl::SAMPLER_PIXEL, pixelSerialIndex, NULL);
-                }
-            }
-#endif
-        }
-    }
-
-    // Get the depth stencil render buffer and serials
-    gl::Renderbuffer *depthStencil = NULL;
-    unsigned int depthbufferSerial = 0;
-    unsigned int stencilbufferSerial = 0;
-    if (framebuffer->getDepthbufferType() != GL_NONE)
-    {
-        depthStencil = framebuffer->getDepthbuffer();
-        if (!depthStencil)
-        {
-            ERR("Depth stencil pointer unexpectedly null.");
-            SafeRelease(framebufferRTVs);
-            return false;
-        }
-
-        depthbufferSerial = depthStencil->getSerial();
-    }
-    else if (framebuffer->getStencilbufferType() != GL_NONE)
-    {
-        depthStencil = framebuffer->getStencilbuffer();
-        if (!depthStencil)
-        {
-            ERR("Depth stencil pointer unexpectedly null.");
-            SafeRelease(framebufferRTVs);
-            return false;
-        }
-
-        stencilbufferSerial = depthStencil->getSerial();
-    }
-
-    // Extract the depth stencil sizes and view
-    unsigned int depthSize = 0;
-    unsigned int stencilSize = 0;
-    ID3D11DepthStencilView* framebufferDSV = NULL;
-    if (depthStencil)
-    {
-        RenderTarget11 *depthStencilRenderTarget = RenderTarget11::makeRenderTarget11(depthStencil->getDepthStencil());
-        if (!depthStencilRenderTarget)
-        {
-            ERR("render target pointer unexpectedly null.");
-            SafeRelease(framebufferRTVs);
-            return false;
-        }
-
-        framebufferDSV = depthStencilRenderTarget->getDepthStencilView();
-        if (!framebufferDSV)
-        {
-            ERR("depth stencil view pointer unexpectedly null.");
-            SafeRelease(framebufferRTVs);
-            return false;
-        }
-
-        // If there is no render buffer, the width, height and format values come from
-        // the depth stencil
-        if (missingColorRenderTarget)
-        {
-            renderTargetWidth = depthStencil->getWidth();
-            renderTargetHeight = depthStencil->getHeight();
-            renderTargetFormat = depthStencil->getActualFormat();
-        }
-
-        depthSize = depthStencil->getDepthSize();
-        stencilSize = depthStencil->getStencilSize();
-    }
-
-    // Apply the render target and depth stencil
-    if (!mRenderTargetDescInitialized || !mDepthStencilInitialized ||
-        memcmp(renderTargetSerials, mAppliedRenderTargetSerials, sizeof(renderTargetSerials)) != 0 ||
-        depthbufferSerial != mAppliedDepthbufferSerial ||
-        stencilbufferSerial != mAppliedStencilbufferSerial)
-    {
-        mDeviceContext->OMSetRenderTargets(getMaxRenderTargets(), framebufferRTVs, framebufferDSV);
-
-        mRenderTargetDesc.width = renderTargetWidth;
-        mRenderTargetDesc.height = renderTargetHeight;
-        mRenderTargetDesc.format = renderTargetFormat;
-        mForceSetViewport = true;
-        mForceSetScissor = true;
-
-        if (!mDepthStencilInitialized || depthSize != mCurDepthSize)
-        {
-            mCurDepthSize = depthSize;
-            mForceSetRasterState = true;
-        }
-
-        mCurStencilSize = stencilSize;
-
-        for (unsigned int rtIndex = 0; rtIndex < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; rtIndex++)
-        {
-            mAppliedRenderTargetSerials[rtIndex] = renderTargetSerials[rtIndex];
-        }
-        mAppliedDepthbufferSerial = depthbufferSerial;
-        mAppliedStencilbufferSerial = stencilbufferSerial;
-        mRenderTargetDescInitialized = true;
-        mDepthStencilInitialized = true;
-    }
-
-    return true;
-}
-
-GLenum Renderer11::applyVertexBuffer(gl::ProgramBinary *programBinary, gl::VertexAttribute vertexAttributes[], GLint first, GLsizei count, GLsizei instances)
-{
-    TranslatedAttribute attributes[gl::MAX_VERTEX_ATTRIBS];
-    GLenum err = mVertexDataManager->prepareVertexData(vertexAttributes, programBinary, first, count, attributes, instances);
-    if (err != GL_NO_ERROR)
-    {
-        return err;
-    }
-
-    return mInputLayoutCache.applyVertexBuffers(attributes, programBinary);
-}
-
-GLenum Renderer11::applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo)
-{
-    GLenum err = mIndexDataManager->prepareIndexData(type, count, elementArrayBuffer, indices, indexInfo);
-
-    if (err == GL_NO_ERROR)
-    {
-        if (indexInfo->storage)
-        {
-            if (indexInfo->serial != mAppliedStorageIBSerial || indexInfo->startOffset != mAppliedIBOffset)
-            {
-                BufferStorage11 *storage = BufferStorage11::makeBufferStorage11(indexInfo->storage);
-                IndexBuffer11* indexBuffer = IndexBuffer11::makeIndexBuffer11(indexInfo->indexBuffer);
-
-                mDeviceContext->IASetIndexBuffer(storage->getBuffer(BUFFER_USAGE_INDEX), indexBuffer->getIndexFormat(), indexInfo->startOffset);
-
-                mAppliedIBSerial = 0;
-                mAppliedStorageIBSerial = storage->getSerial();
-                mAppliedIBOffset = indexInfo->startOffset;
-            }
-        }
-        else if (indexInfo->serial != mAppliedIBSerial || indexInfo->startOffset != mAppliedIBOffset)
-        {
-            IndexBuffer11* indexBuffer = IndexBuffer11::makeIndexBuffer11(indexInfo->indexBuffer);
-
-            mDeviceContext->IASetIndexBuffer(indexBuffer->getBuffer(), indexBuffer->getIndexFormat(), indexInfo->startOffset);
-
-            mAppliedIBSerial = indexInfo->serial;
-            mAppliedStorageIBSerial = 0;
-            mAppliedIBOffset = indexInfo->startOffset;
-        }
-    }
-
-    return err;
-}
-
-void Renderer11::drawArrays(GLenum mode, GLsizei count, GLsizei instances)
-{
-    if (mode == GL_LINE_LOOP)
-    {
-        drawLineLoop(count, GL_NONE, NULL, 0, NULL);
-    }
-    else if (mode == GL_TRIANGLE_FAN)
-    {
-        drawTriangleFan(count, GL_NONE, NULL, 0, NULL, instances);
-    }
-    else if (instances > 0)
-    {
-        mDeviceContext->DrawInstanced(count, instances, 0, 0);
-    }
-    else
-    {
-        mDeviceContext->Draw(count, 0);
-    }
-}
-
-void Renderer11::drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances)
-{
-    if (mode == GL_LINE_LOOP)
-    {
-        drawLineLoop(count, type, indices, indexInfo.minIndex, elementArrayBuffer);
-    }
-    else if (mode == GL_TRIANGLE_FAN)
-    {
-        drawTriangleFan(count, type, indices, indexInfo.minIndex, elementArrayBuffer, instances);
-    }
-    else if (instances > 0)
-    {
-        mDeviceContext->DrawIndexedInstanced(count, instances, 0, -static_cast<int>(indexInfo.minIndex), 0);
-    }
-    else
-    {
-        mDeviceContext->DrawIndexed(count, 0, -static_cast<int>(indexInfo.minIndex));
-    }
-}
-
-template<typename T>
-static void fillLineLoopIndices(GLenum type, GLsizei count, const GLvoid *indices, T *data)
-{
-    switch (type)
-    {
-      case GL_NONE:   // Non-indexed draw
-        for (int i = 0; i < count; i++)
-        {
-            data[i] = i;
-        }
-        data[count] = 0;
-        break;
-      case GL_UNSIGNED_BYTE:
-        for (int i = 0; i < count; i++)
-        {
-            data[i] = static_cast<const GLubyte*>(indices)[i];
-        }
-        data[count] = static_cast<const GLubyte*>(indices)[0];
-        break;
-      case GL_UNSIGNED_SHORT:
-        for (int i = 0; i < count; i++)
-        {
-            data[i] = static_cast<const GLushort*>(indices)[i];
-        }
-        data[count] = static_cast<const GLushort*>(indices)[0];
-        break;
-      case GL_UNSIGNED_INT:
-        for (int i = 0; i < count; i++)
-        {
-            data[i] = static_cast<const GLuint*>(indices)[i];
-        }
-        data[count] = static_cast<const GLuint*>(indices)[0];
-        break;
-      default: UNREACHABLE();
-    }
-}
-
-template<typename T>
-static void fillTriangleFanIndices(GLenum type, unsigned int numTris, const GLvoid *indices, T *data)
-{
-    switch (type)
-    {
-      case GL_NONE:   // Non-indexed draw
-        for (unsigned int i = 0; i < numTris; i++)
-        {
-            data[i*3 + 0] = 0;
-            data[i*3 + 1] = i + 1;
-            data[i*3 + 2] = i + 2;
-        }
-        break;
-      case GL_UNSIGNED_BYTE:
-        for (unsigned int i = 0; i < numTris; i++)
-        {
-            data[i*3 + 0] = static_cast<const GLubyte*>(indices)[0];
-            data[i*3 + 1] = static_cast<const GLubyte*>(indices)[i + 1];
-            data[i*3 + 2] = static_cast<const GLubyte*>(indices)[i + 2];
-        }
-        break;
-      case GL_UNSIGNED_SHORT:
-        for (unsigned int i = 0; i < numTris; i++)
-        {
-            data[i*3 + 0] = static_cast<const GLushort*>(indices)[0];
-            data[i*3 + 1] = static_cast<const GLushort*>(indices)[i + 1];
-            data[i*3 + 2] = static_cast<const GLushort*>(indices)[i + 2];
-        }
-        break;
-      case GL_UNSIGNED_INT:
-        for (unsigned int i = 0; i < numTris; i++)
-        {
-            data[i*3 + 0] = static_cast<const GLuint*>(indices)[0];
-            data[i*3 + 1] = static_cast<const GLuint*>(indices)[i + 1];
-            data[i*3 + 2] = static_cast<const GLuint*>(indices)[i + 2];
-        }
-        break;
-      default: UNREACHABLE();
-    }
-}
-
-void Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
-{
-    // Get the raw indices for an indexed draw
-    if (type != GL_NONE && elementArrayBuffer)
-    {
-        gl::Buffer *indexBuffer = elementArrayBuffer;
-        BufferStorage *storage = indexBuffer->getStorage();
-        intptr_t offset = reinterpret_cast<intptr_t>(indices);
-        indices = static_cast<const GLubyte*>(storage->getData()) + offset;
-    }
-
-    const int indexType = get32BitIndexSupport() ? GL_UNSIGNED_INT : GL_UNSIGNED_SHORT;
-
-    if (!mLineLoopIB)
-    {
-        mLineLoopIB = new StreamingIndexBufferInterface(this);
-        if (!mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType))
-        {
-            delete mLineLoopIB;
-            mLineLoopIB = NULL;
-
-            ERR("Could not create a 32-bit looping index buffer for GL_LINE_LOOP.");
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    // Checked by Renderer11::applyPrimitiveType
-    ASSERT(count >= 0);
-
-    if (static_cast<unsigned int>(count) + 1 > (std::numeric_limits<unsigned int>::max() / sizeof(unsigned int)))
-    {
-        ERR("Could not create a 32-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    const unsigned int spaceNeeded = (static_cast<unsigned int>(count) + 1) * sizeof(unsigned int);
-    if (!mLineLoopIB->reserveBufferSpace(spaceNeeded, indexType))
-    {
-        ERR("Could not reserve enough space in looping index buffer for GL_LINE_LOOP.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    void* mappedMemory = NULL;
-    unsigned int offset;
-    if (!mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset))
-    {
-        ERR("Could not map index buffer for GL_LINE_LOOP.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    if (indexType == GL_UNSIGNED_SHORT)
-        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned short*>(mappedMemory));
-    else
-        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned int*>(mappedMemory));
-    unsigned int indexBufferOffset = offset;
-
-    if (!mLineLoopIB->unmapBuffer())
-    {
-        ERR("Could not unmap index buffer for GL_LINE_LOOP.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    if (mAppliedIBSerial != mLineLoopIB->getSerial() || mAppliedIBOffset != indexBufferOffset)
-    {
-        IndexBuffer11 *indexBuffer = IndexBuffer11::makeIndexBuffer11(mLineLoopIB->getIndexBuffer());
-
-        mDeviceContext->IASetIndexBuffer(indexBuffer->getBuffer(), indexBuffer->getIndexFormat(), indexBufferOffset);
-        mAppliedIBSerial = mLineLoopIB->getSerial();
-        mAppliedStorageIBSerial = 0;
-        mAppliedIBOffset = indexBufferOffset;
-    }
-
-    mDeviceContext->DrawIndexed(count + 1, 0, -minIndex);
-}
-
-void Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer, int instances)
-{
-    // Get the raw indices for an indexed draw
-    if (type != GL_NONE && elementArrayBuffer)
-    {
-        gl::Buffer *indexBuffer = elementArrayBuffer;
-        BufferStorage *storage = indexBuffer->getStorage();
-        intptr_t offset = reinterpret_cast<intptr_t>(indices);
-        indices = static_cast<const GLubyte*>(storage->getData()) + offset;
-    }
-
-    const int indexType = get32BitIndexSupport() ? GL_UNSIGNED_INT : GL_UNSIGNED_SHORT;
-
-    if (!mTriangleFanIB)
-    {
-        mTriangleFanIB = new StreamingIndexBufferInterface(this);
-        if (!mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType))
-        {
-            delete mTriangleFanIB;
-            mTriangleFanIB = NULL;
-
-            ERR("Could not create a scratch index buffer for GL_TRIANGLE_FAN.");
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    // Checked by Renderer11::applyPrimitiveType
-    ASSERT(count >= 3);
-
-    const unsigned int numTris = count - 2;
-
-    if (numTris > (std::numeric_limits<unsigned int>::max() / (sizeof(unsigned int) * 3)))
-    {
-        ERR("Could not create a scratch index buffer for GL_TRIANGLE_FAN, too many indices required.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    const unsigned int spaceNeeded = (numTris * 3) * sizeof(unsigned int);
-    if (!mTriangleFanIB->reserveBufferSpace(spaceNeeded, indexType))
-    {
-        ERR("Could not reserve enough space in scratch index buffer for GL_TRIANGLE_FAN.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    void* mappedMemory = NULL;
-    unsigned int offset;
-    if (!mTriangleFanIB->mapBuffer(spaceNeeded, &mappedMemory, &offset))
-    {
-        ERR("Could not map scratch index buffer for GL_TRIANGLE_FAN.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    if (indexType == GL_UNSIGNED_SHORT)
-        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned short*>(mappedMemory));
-    else
-        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned int*>(mappedMemory));
-    unsigned int indexBufferOffset = offset;
-
-
-    if (!mTriangleFanIB->unmapBuffer())
-    {
-        ERR("Could not unmap scratch index buffer for GL_TRIANGLE_FAN.");
-        return gl::error(GL_OUT_OF_MEMORY);
-    }
-
-    if (mAppliedIBSerial != mTriangleFanIB->getSerial() || mAppliedIBOffset != indexBufferOffset)
-    {
-        IndexBuffer11 *indexBuffer = IndexBuffer11::makeIndexBuffer11(mTriangleFanIB->getIndexBuffer());
-
-        mDeviceContext->IASetIndexBuffer(indexBuffer->getBuffer(), indexBuffer->getIndexFormat(), indexBufferOffset);
-        mAppliedIBSerial = mTriangleFanIB->getSerial();
-        mAppliedStorageIBSerial = 0;
-        mAppliedIBOffset = indexBufferOffset;
-    }
-
-    if (instances > 0)
-    {
-        mDeviceContext->DrawIndexedInstanced(numTris * 3, instances, 0, -minIndex, 0);
-    }
-    else
-    {
-        mDeviceContext->DrawIndexed(numTris * 3, 0, -minIndex);
-    }
-}
-
-void Renderer11::applyShaders(gl::ProgramBinary *programBinary)
-{
-    unsigned int programBinarySerial = programBinary->getSerial();
-    const bool updateProgramState = (programBinarySerial != mAppliedProgramBinarySerial);
-
-    if (updateProgramState)
-    {
-        ShaderExecutable *vertexExe = programBinary->getVertexExecutable();
-        ShaderExecutable *pixelExe = programBinary->getPixelExecutable();
-
-        ID3D11VertexShader *vertexShader = NULL;
-        if (vertexExe) vertexShader = ShaderExecutable11::makeShaderExecutable11(vertexExe)->getVertexShader();
-
-        ID3D11PixelShader *pixelShader = NULL;
-        if (pixelExe) pixelShader = ShaderExecutable11::makeShaderExecutable11(pixelExe)->getPixelShader();
-
-        mDeviceContext->PSSetShader(pixelShader, NULL, 0);
-        mDeviceContext->VSSetShader(vertexShader, NULL, 0);
-
-        programBinary->dirtyAllUniforms();
-
-        mAppliedProgramBinarySerial = programBinarySerial;
-    }
-
-    // Only use the geometry shader currently for point sprite drawing
-    const bool usesGeometryShader = (programBinary->usesGeometryShader() && mCurRasterState.pointDrawMode);
-
-    if (updateProgramState || usesGeometryShader != mIsGeometryShaderActive)
-    {
-        if (usesGeometryShader)
-        {
-            ShaderExecutable *geometryExe = programBinary->getGeometryExecutable();
-            ID3D11GeometryShader *geometryShader = ShaderExecutable11::makeShaderExecutable11(geometryExe)->getGeometryShader();
-            mDeviceContext->GSSetShader(geometryShader, NULL, 0);
-        }
-        else
-        {
-            mDeviceContext->GSSetShader(NULL, NULL, 0);
-        }
-
-        mIsGeometryShaderActive = usesGeometryShader;
-    }
-}
-
-void Renderer11::applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray *uniformArray)
-{
-    ShaderExecutable11 *vertexExecutable = ShaderExecutable11::makeShaderExecutable11(programBinary->getVertexExecutable());
-    ShaderExecutable11 *pixelExecutable = ShaderExecutable11::makeShaderExecutable11(programBinary->getPixelExecutable());
-
-    unsigned int totalRegisterCountVS = 0;
-    unsigned int totalRegisterCountPS = 0;
-
-    bool vertexUniformsDirty = false;
-    bool pixelUniformsDirty = false;
-
-    for (gl::UniformArray::const_iterator uniform_iterator = uniformArray->begin(); uniform_iterator != uniformArray->end(); uniform_iterator++)
-    {
-        const gl::Uniform *uniform = *uniform_iterator;
-
-        if (uniform->vsRegisterIndex >= 0)
-        {
-            totalRegisterCountVS += uniform->registerCount;
-            vertexUniformsDirty = vertexUniformsDirty || uniform->dirty;
-        }
-
-        if (uniform->psRegisterIndex >= 0)
-        {
-            totalRegisterCountPS += uniform->registerCount;
-            pixelUniformsDirty = pixelUniformsDirty || uniform->dirty;
-        }
-    }
-
-    ID3D11Buffer *vertexConstantBuffer = vertexExecutable->getConstantBuffer(mDevice, totalRegisterCountVS);
-    ID3D11Buffer *pixelConstantBuffer = pixelExecutable->getConstantBuffer(mDevice, totalRegisterCountPS);
-
-    float (*mapVS)[4] = NULL;
-    float (*mapPS)[4] = NULL;
-
-    if (totalRegisterCountVS > 0 && vertexUniformsDirty)
-    {
-        D3D11_MAPPED_SUBRESOURCE map = {0};
-        HRESULT result = mDeviceContext->Map(vertexConstantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &map);
-        ASSERT(SUCCEEDED(result));
-        mapVS = (float(*)[4])map.pData;
-    }
-
-    if (totalRegisterCountPS > 0 && pixelUniformsDirty)
-    {
-        D3D11_MAPPED_SUBRESOURCE map = {0};
-        HRESULT result = mDeviceContext->Map(pixelConstantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &map);
-        ASSERT(SUCCEEDED(result));
-        mapPS = (float(*)[4])map.pData;
-    }
-
-    for (gl::UniformArray::iterator uniform_iterator = uniformArray->begin(); uniform_iterator != uniformArray->end(); uniform_iterator++)
-    {
-        gl::Uniform *uniform = *uniform_iterator;
-
-        if (uniform->type !=  GL_SAMPLER_2D && uniform->type != GL_SAMPLER_CUBE)
-        {
-            if (uniform->vsRegisterIndex >= 0 && mapVS)
-            {
-                memcpy(mapVS + uniform->vsRegisterIndex, uniform->data, uniform->registerCount * sizeof(float[4]));
-            }
-
-            if (uniform->psRegisterIndex >= 0 && mapPS)
-            {
-                memcpy(mapPS + uniform->psRegisterIndex, uniform->data, uniform->registerCount * sizeof(float[4]));
-            }
-        }
-
-        uniform->dirty = false;
-    }
-
-    if (mapVS)
-    {
-        mDeviceContext->Unmap(vertexConstantBuffer, 0);
-    }
-
-    if (mapPS)
-    {
-        mDeviceContext->Unmap(pixelConstantBuffer, 0);
-    }
-
-    if (mCurrentVertexConstantBuffer != vertexConstantBuffer)
-    {
-        mDeviceContext->VSSetConstantBuffers(0, 1, &vertexConstantBuffer);
-        mCurrentVertexConstantBuffer = vertexConstantBuffer;
-    }
-
-    if (mCurrentPixelConstantBuffer != pixelConstantBuffer)
-    {
-        mDeviceContext->PSSetConstantBuffers(0, 1, &pixelConstantBuffer);
-        mCurrentPixelConstantBuffer = pixelConstantBuffer;
-    }
-
-    // Driver uniforms
-    if (!mDriverConstantBufferVS)
-    {
-        D3D11_BUFFER_DESC constantBufferDescription = {0};
-        constantBufferDescription.ByteWidth = sizeof(dx_VertexConstants);
-        constantBufferDescription.Usage = D3D11_USAGE_DEFAULT;
-        constantBufferDescription.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
-        constantBufferDescription.CPUAccessFlags = 0;
-        constantBufferDescription.MiscFlags = 0;
-        constantBufferDescription.StructureByteStride = 0;
-
-        HRESULT result = mDevice->CreateBuffer(&constantBufferDescription, NULL, &mDriverConstantBufferVS);
-        ASSERT(SUCCEEDED(result));
-
-        mDeviceContext->VSSetConstantBuffers(1, 1, &mDriverConstantBufferVS);
-    }
-
-    if (!mDriverConstantBufferPS)
-    {
-        D3D11_BUFFER_DESC constantBufferDescription = {0};
-        constantBufferDescription.ByteWidth = sizeof(dx_PixelConstants);
-        constantBufferDescription.Usage = D3D11_USAGE_DEFAULT;
-        constantBufferDescription.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
-        constantBufferDescription.CPUAccessFlags = 0;
-        constantBufferDescription.MiscFlags = 0;
-        constantBufferDescription.StructureByteStride = 0;
-
-        HRESULT result = mDevice->CreateBuffer(&constantBufferDescription, NULL, &mDriverConstantBufferPS);
-        ASSERT(SUCCEEDED(result));
-
-        mDeviceContext->PSSetConstantBuffers(1, 1, &mDriverConstantBufferPS);
-    }
-
-    if (memcmp(&mVertexConstants, &mAppliedVertexConstants, sizeof(dx_VertexConstants)) != 0)
-    {
-        mDeviceContext->UpdateSubresource(mDriverConstantBufferVS, 0, NULL, &mVertexConstants, 16, 0);
-        memcpy(&mAppliedVertexConstants, &mVertexConstants, sizeof(dx_VertexConstants));
-    }
-
-    if (memcmp(&mPixelConstants, &mAppliedPixelConstants, sizeof(dx_PixelConstants)) != 0)
-    {
-        mDeviceContext->UpdateSubresource(mDriverConstantBufferPS, 0, NULL, &mPixelConstants, 16, 0);
-        memcpy(&mAppliedPixelConstants, &mPixelConstants, sizeof(dx_PixelConstants));
-    }
-
-    // needed for the point sprite geometry shader
-    if (mFeatureLevel >= D3D_FEATURE_LEVEL_10_0 && mCurrentGeometryConstantBuffer != mDriverConstantBufferPS)
-    {
-        mDeviceContext->GSSetConstantBuffers(0, 1, &mDriverConstantBufferPS);
-        mCurrentGeometryConstantBuffer = mDriverConstantBufferPS;
-    }
-}
-
-void Renderer11::clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer)
-{
-     gl::Renderbuffer *firstRenderbuffer = frameBuffer->getFirstColorbuffer();
-     GLenum internalFormat = firstRenderbuffer ? firstRenderbuffer->getInternalFormat() : GL_NONE;
-
-     bool needMaskedColorClear = (clearParams.mask & GL_COLOR_BUFFER_BIT) &&
-                                 ((!clearParams.colorMaskRed && gl::GetRedSize(internalFormat) > 0) ||
-                                  (!clearParams.colorMaskGreen && gl::GetGreenSize(internalFormat) > 0) ||
-                                  (!clearParams.colorMaskBlue && gl::GetBlueSize(internalFormat) > 0) ||
-                                  (!clearParams.colorMaskAlpha && gl::GetAlphaSize(internalFormat) > 0));
-
-     unsigned int stencilUnmasked = 0x0;
-     if (frameBuffer->hasStencil())
-     {
-         unsigned int stencilSize = gl::GetStencilSize(frameBuffer->getStencilbuffer()->getActualFormat());
-         stencilUnmasked = (0x1 << stencilSize) - 1;
-     }
-     bool needMaskedStencilClear = (clearParams.mask & GL_STENCIL_BUFFER_BIT) &&
-                                   (clearParams.stencilWriteMask & stencilUnmasked) != stencilUnmasked;
-
-     bool needScissoredClear = mScissorEnabled && (mCurScissor.x > 0 || mCurScissor.y > 0 ||
-                                                   mCurScissor.x + mCurScissor.width < mRenderTargetDesc.width ||
-                                                   mCurScissor.y + mCurScissor.height < mRenderTargetDesc.height);
-
-     if (needMaskedColorClear || needMaskedStencilClear || needScissoredClear)
-     {
-         maskedClear(clearParams, frameBuffer);
-     }
-     else
-     {
-         if (clearParams.mask & GL_COLOR_BUFFER_BIT)
-         {
-             for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
-             {
-                 if (frameBuffer->isEnabledColorAttachment(colorAttachment))
-                 {
-                     gl::Renderbuffer *renderbufferObject = frameBuffer->getColorbuffer(colorAttachment);
-                     if (renderbufferObject)
-                     {
-                        RenderTarget11 *renderTarget = RenderTarget11::makeRenderTarget11(renderbufferObject->getRenderTarget());
-                        if (!renderTarget)
-                        {
-                            ERR("render target pointer unexpectedly null.");
-                            return;
-                        }
-
-                        ID3D11RenderTargetView *framebufferRTV = renderTarget->getRenderTargetView();
-                        if (!framebufferRTV)
-                        {
-                            ERR("render target view pointer unexpectedly null.");
-                            return;
-                        }
-
-                        GLenum format = renderbufferObject->getInternalFormat();
-
-                        const float clearValues[4] = { (gl::GetRedSize(format) > 0)   ? clearParams.colorClearValue.red   : 0.0f,
-                                                       (gl::GetGreenSize(format) > 0) ? clearParams.colorClearValue.green : 0.0f,
-                                                       (gl::GetBlueSize(format) > 0)  ? clearParams.colorClearValue.blue  : 0.0f,
-                                                       (gl::GetAlphaSize(format) > 0) ? clearParams.colorClearValue.alpha : 1.0f };
-                        mDeviceContext->ClearRenderTargetView(framebufferRTV, clearValues);
-                    }
-                 }
-             }
-        }
-        if (clearParams.mask & GL_DEPTH_BUFFER_BIT || clearParams.mask & GL_STENCIL_BUFFER_BIT)
-        {
-            gl::Renderbuffer *renderbufferObject = frameBuffer->getDepthOrStencilbuffer();
-            if (renderbufferObject)
-            {
-                RenderTarget11 *renderTarget = RenderTarget11::makeRenderTarget11(renderbufferObject->getDepthStencil());
-                if (!renderTarget)
-                {
-                    ERR("render target pointer unexpectedly null.");
-                    return;
-                }
-
-                ID3D11DepthStencilView *framebufferDSV = renderTarget->getDepthStencilView();
-                if (!framebufferDSV)
-                {
-                    ERR("depth stencil view pointer unexpectedly null.");
-                    return;
-                }
-
-                UINT clearFlags = 0;
-                if (clearParams.mask & GL_DEPTH_BUFFER_BIT)
-                {
-                    clearFlags |= D3D11_CLEAR_DEPTH;
-                }
-                if (clearParams.mask & GL_STENCIL_BUFFER_BIT)
-                {
-                    clearFlags |= D3D11_CLEAR_STENCIL;
-                }
-
-                float depthClear = gl::clamp01(clearParams.depthClearValue);
-                UINT8 stencilClear = clearParams.stencilClearValue & 0x000000FF;
-
-                mDeviceContext->ClearDepthStencilView(framebufferDSV, clearFlags, depthClear, stencilClear);
-            }
-        }
-    }
-}
-
-void Renderer11::maskedClear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer)
-{
-    HRESULT result;
-
-    if (!mClearResourcesInitialized)
-    {
-        ASSERT(!mClearVB && !mClearVS && !mClearSinglePS && !mClearMultiplePS && !mClearScissorRS && !mClearNoScissorRS);
-
-        D3D11_BUFFER_DESC vbDesc;
-        vbDesc.ByteWidth = sizeof(d3d11::PositionDepthColorVertex) * 4;
-        vbDesc.Usage = D3D11_USAGE_DYNAMIC;
-        vbDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
-        vbDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
-        vbDesc.MiscFlags = 0;
-        vbDesc.StructureByteStride = 0;
-
-        result = mDevice->CreateBuffer(&vbDesc, NULL, &mClearVB);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearVB, "Renderer11 masked clear vertex buffer");
-
-        D3D11_INPUT_ELEMENT_DESC quadLayout[] =
-        {
-            { "POSITION", 0, DXGI_FORMAT_R32G32B32_FLOAT,    0,  0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
-            { "COLOR",    0, DXGI_FORMAT_R32G32B32A32_FLOAT, 0, 12, D3D11_INPUT_PER_VERTEX_DATA, 0 },
-        };
-
-        result = mDevice->CreateInputLayout(quadLayout, 2, g_VS_Clear, sizeof(g_VS_Clear), &mClearIL);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearIL, "Renderer11 masked clear input layout");
-
-        result = mDevice->CreateVertexShader(g_VS_Clear, sizeof(g_VS_Clear), NULL, &mClearVS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearVS, "Renderer11 masked clear vertex shader");
-
-        result = mDevice->CreatePixelShader(g_PS_ClearSingle, sizeof(g_PS_ClearSingle), NULL, &mClearSinglePS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearSinglePS, "Renderer11 masked clear pixel shader (1 RT)");
-
-        result = mDevice->CreatePixelShader(g_PS_ClearMultiple, sizeof(g_PS_ClearMultiple), NULL, &mClearMultiplePS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearMultiplePS, "Renderer11 masked clear pixel shader (MRT)");
-
-        D3D11_RASTERIZER_DESC rsScissorDesc;
-        rsScissorDesc.FillMode = D3D11_FILL_SOLID;
-        rsScissorDesc.CullMode = D3D11_CULL_NONE;
-        rsScissorDesc.FrontCounterClockwise = FALSE;
-        rsScissorDesc.DepthBias = 0;
-        rsScissorDesc.DepthBiasClamp = 0.0f;
-        rsScissorDesc.SlopeScaledDepthBias = 0.0f;
-        rsScissorDesc.DepthClipEnable = FALSE;
-        rsScissorDesc.ScissorEnable = TRUE;
-        rsScissorDesc.MultisampleEnable = FALSE;
-        rsScissorDesc.AntialiasedLineEnable = FALSE;
-
-        result = mDevice->CreateRasterizerState(&rsScissorDesc, &mClearScissorRS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearScissorRS, "Renderer11 masked clear scissor rasterizer state");
-
-        D3D11_RASTERIZER_DESC rsNoScissorDesc;
-        rsNoScissorDesc.FillMode = D3D11_FILL_SOLID;
-        rsNoScissorDesc.CullMode = D3D11_CULL_NONE;
-        rsNoScissorDesc.FrontCounterClockwise = FALSE;
-        rsNoScissorDesc.DepthBias = 0;
-        rsNoScissorDesc.DepthBiasClamp = 0.0f;
-        rsNoScissorDesc.SlopeScaledDepthBias = 0.0f;
-        rsNoScissorDesc.DepthClipEnable = FALSE;
-        rsNoScissorDesc.ScissorEnable = FALSE;
-        rsNoScissorDesc.MultisampleEnable = FALSE;
-        rsNoScissorDesc.AntialiasedLineEnable = FALSE;
-
-        result = mDevice->CreateRasterizerState(&rsNoScissorDesc, &mClearNoScissorRS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mClearNoScissorRS, "Renderer11 masked clear no scissor rasterizer state");
-
-        mClearResourcesInitialized = true;
-    }
-
-    // Prepare the depth stencil state to write depth values if the depth should be cleared
-    // and stencil values if the stencil should be cleared
-    gl::DepthStencilState glDSState;
-    glDSState.depthTest = (clearParams.mask & GL_DEPTH_BUFFER_BIT) != 0;
-    glDSState.depthFunc = GL_ALWAYS;
-    glDSState.depthMask = (clearParams.mask & GL_DEPTH_BUFFER_BIT) != 0;
-    glDSState.stencilTest = (clearParams.mask & GL_STENCIL_BUFFER_BIT) != 0;
-    glDSState.stencilFunc = GL_ALWAYS;
-    glDSState.stencilMask = 0;
-    glDSState.stencilFail = GL_REPLACE;
-    glDSState.stencilPassDepthFail = GL_REPLACE;
-    glDSState.stencilPassDepthPass = GL_REPLACE;
-    glDSState.stencilWritemask = clearParams.stencilWriteMask;
-    glDSState.stencilBackFunc = GL_ALWAYS;
-    glDSState.stencilBackMask = 0;
-    glDSState.stencilBackFail = GL_REPLACE;
-    glDSState.stencilBackPassDepthFail = GL_REPLACE;
-    glDSState.stencilBackPassDepthPass = GL_REPLACE;
-    glDSState.stencilBackWritemask = clearParams.stencilWriteMask;
-
-    int stencilClear = clearParams.stencilClearValue & 0x000000FF;
-
-    ID3D11DepthStencilState *dsState = mStateCache.getDepthStencilState(glDSState);
-
-    // Prepare the blend state to use a write mask if the color buffer should be cleared
-    gl::BlendState glBlendState;
-    glBlendState.blend = false;
-    glBlendState.sourceBlendRGB = GL_ONE;
-    glBlendState.destBlendRGB = GL_ZERO;
-    glBlendState.sourceBlendAlpha = GL_ONE;
-    glBlendState.destBlendAlpha = GL_ZERO;
-    glBlendState.blendEquationRGB = GL_FUNC_ADD;
-    glBlendState.blendEquationAlpha = GL_FUNC_ADD;
-    glBlendState.colorMaskRed = (clearParams.mask & GL_COLOR_BUFFER_BIT) ? clearParams.colorMaskRed : false;
-    glBlendState.colorMaskGreen = (clearParams.mask & GL_COLOR_BUFFER_BIT) ? clearParams.colorMaskGreen : false;
-    glBlendState.colorMaskBlue = (clearParams.mask & GL_COLOR_BUFFER_BIT) ? clearParams.colorMaskBlue : false;
-    glBlendState.colorMaskAlpha = (clearParams.mask & GL_COLOR_BUFFER_BIT) ? clearParams.colorMaskAlpha : false;
-    glBlendState.sampleAlphaToCoverage = false;
-    glBlendState.dither = false;
-
-    static const float blendFactors[4] = { 1.0f, 1.0f, 1.0f, 1.0f };
-    static const UINT sampleMask = 0xFFFFFFFF;
-
-    ID3D11BlendState *blendState = mStateCache.getBlendState(frameBuffer, glBlendState);
-
-    // Set the vertices
-    D3D11_MAPPED_SUBRESOURCE mappedResource;
-    result = mDeviceContext->Map(mClearVB, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
-    if (FAILED(result))
-    {
-        ERR("Failed to map masked clear vertex buffer, HRESULT: 0x%X.", result);
-        return;
-    }
-
-    d3d11::PositionDepthColorVertex *vertices = reinterpret_cast<d3d11::PositionDepthColorVertex*>(mappedResource.pData);
-
-    float depthClear = gl::clamp01(clearParams.depthClearValue);
-    d3d11::SetPositionDepthColorVertex(&vertices[0], -1.0f,  1.0f, depthClear, clearParams.colorClearValue);
-    d3d11::SetPositionDepthColorVertex(&vertices[1], -1.0f, -1.0f, depthClear, clearParams.colorClearValue);
-    d3d11::SetPositionDepthColorVertex(&vertices[2],  1.0f,  1.0f, depthClear, clearParams.colorClearValue);
-    d3d11::SetPositionDepthColorVertex(&vertices[3],  1.0f, -1.0f, depthClear, clearParams.colorClearValue);
-
-    mDeviceContext->Unmap(mClearVB, 0);
-
-    // Apply state
-    mDeviceContext->OMSetBlendState(blendState, blendFactors, sampleMask);
-    mDeviceContext->OMSetDepthStencilState(dsState, stencilClear);
-    mDeviceContext->RSSetState(mScissorEnabled ? mClearScissorRS : mClearNoScissorRS);
-
-    // Apply shaders
-    ID3D11PixelShader *pixelShader = frameBuffer->usingExtendedDrawBuffers() ? mClearMultiplePS : mClearSinglePS;
-
-    mDeviceContext->IASetInputLayout(mClearIL);
-    mDeviceContext->VSSetShader(mClearVS, NULL, 0);
-    mDeviceContext->PSSetShader(pixelShader, NULL, 0);
-    mDeviceContext->GSSetShader(NULL, NULL, 0);
-
-    // Apply vertex buffer
-    static UINT stride = sizeof(d3d11::PositionDepthColorVertex);
-    static UINT startIdx = 0;
-    mDeviceContext->IASetVertexBuffers(0, 1, &mClearVB, &stride, &startIdx);
-    mDeviceContext->IASetPrimitiveTopology(D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP);
-
-    // Draw the clear quad
-    mDeviceContext->Draw(4, 0);
-
-    // Clean up
-    markAllStateDirty();
-}
-
-void Renderer11::markAllStateDirty()
-{
-    for (unsigned int rtIndex = 0; rtIndex < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; rtIndex++)
-    {
-        mAppliedRenderTargetSerials[rtIndex] = 0;
-    }
-    mAppliedDepthbufferSerial = 0;
-    mAppliedStencilbufferSerial = 0;
-    mDepthStencilInitialized = false;
-    mRenderTargetDescInitialized = false;
-
-    for (int i = 0; i < gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS; i++)
-    {
-        mForceSetVertexSamplerStates[i] = true;
-        mCurVertexTextureSerials[i] = 0;
-    }
-    for (int i = 0; i < gl::MAX_TEXTURE_IMAGE_UNITS; i++)
-    {
-        mForceSetPixelSamplerStates[i] = true;
-        mCurPixelTextureSerials[i] = 0;
-    }
-
-    mForceSetBlendState = true;
-    mForceSetRasterState = true;
-    mForceSetDepthStencilState = true;
-    mForceSetScissor = true;
-    mForceSetViewport = true;
-
-    mAppliedIBSerial = 0;
-    mAppliedStorageIBSerial = 0;
-    mAppliedIBOffset = 0;
-
-    mAppliedProgramBinarySerial = 0;
-    memset(&mAppliedVertexConstants, 0, sizeof(dx_VertexConstants));
-    memset(&mAppliedPixelConstants, 0, sizeof(dx_PixelConstants));
-
-    mInputLayoutCache.markDirty();
-
-    mCurrentVertexConstantBuffer = NULL;
-    mCurrentPixelConstantBuffer = NULL;
-    mCurrentGeometryConstantBuffer = NULL;
-
-    mCurrentPrimitiveTopology = D3D_PRIMITIVE_TOPOLOGY_UNDEFINED;
-}
-
-void Renderer11::releaseDeviceResources()
-{
-    mStateCache.clear();
-    mInputLayoutCache.clear();
-
-    delete mVertexDataManager;
-    mVertexDataManager = NULL;
-
-    delete mIndexDataManager;
-    mIndexDataManager = NULL;
-
-    delete mLineLoopIB;
-    mLineLoopIB = NULL;
-
-    delete mTriangleFanIB;
-    mTriangleFanIB = NULL;
-
-    SafeRelease(mCopyVB);
-    SafeRelease(mCopySampler);
-    SafeRelease(mCopyIL);
-    SafeRelease(mCopyIL);
-    SafeRelease(mCopyVS);
-    SafeRelease(mCopyRGBAPS);
-    SafeRelease(mCopyRGBPS);
-    SafeRelease(mCopyLumPS);
-    SafeRelease(mCopyLumAlphaPS);
-
-    mCopyResourcesInitialized = false;
-
-    SafeRelease(mClearVB);
-    SafeRelease(mClearIL);
-    SafeRelease(mClearVS);
-    SafeRelease(mClearSinglePS);
-    SafeRelease(mClearMultiplePS);
-    SafeRelease(mClearScissorRS);
-    SafeRelease(mClearNoScissorRS);
-
-    mClearResourcesInitialized = false;
-
-    SafeRelease(mDriverConstantBufferVS);
-    SafeRelease(mDriverConstantBufferPS);
-    SafeRelease(mSyncQuery);
-}
-
-void Renderer11::notifyDeviceLost()
-{
-    mDeviceLost = true;
-    mDisplay->notifyDeviceLost();
-}
-
-bool Renderer11::isDeviceLost()
-{
-    return mDeviceLost;
-}
-
-// set notify to true to broadcast a message to all contexts of the device loss
-bool Renderer11::testDeviceLost(bool notify)
-{
-    bool isLost = false;
-
-    // GetRemovedReason is used to test if the device is removed
-    HRESULT result = mDevice->GetDeviceRemovedReason();
-    isLost = d3d11::isDeviceLostError(result);
-
-    if (isLost)
-    {
-        // Log error if this is a new device lost event
-        if (mDeviceLost == false)
-        {
-            ERR("The D3D11 device was removed: 0x%08X", result);
-        }
-
-        // ensure we note the device loss --
-        // we'll probably get this done again by notifyDeviceLost
-        // but best to remember it!
-        // Note that we don't want to clear the device loss status here
-        // -- this needs to be done by resetDevice
-        mDeviceLost = true;
-        if (notify)
-        {
-            notifyDeviceLost();
-        }
-    }
-
-    return isLost;
-}
-
-bool Renderer11::testDeviceResettable()
-{
-    // determine if the device is resettable by creating a dummy device
-    PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = (PFN_D3D11_CREATE_DEVICE)GetProcAddress(mD3d11Module, "D3D11CreateDevice");
-
-    if (D3D11CreateDevice == NULL)
-    {
-        return false;
-    }
-
-    D3D_FEATURE_LEVEL featureLevels[] =
-    {
-        D3D_FEATURE_LEVEL_11_0,
-        D3D_FEATURE_LEVEL_10_1,
-        D3D_FEATURE_LEVEL_10_0,
-#if !defined(ANGLE_ENABLE_D3D9)
-        D3D_FEATURE_LEVEL_9_3,
-        D3D_FEATURE_LEVEL_9_2,
-        D3D_FEATURE_LEVEL_9_1,
-#endif
-    };
-
-    ID3D11Device* dummyDevice;
-    D3D_FEATURE_LEVEL dummyFeatureLevel;
-    ID3D11DeviceContext* dummyContext;
-
-    HRESULT result = D3D11CreateDevice(NULL,
-                                       D3D_DRIVER_TYPE_HARDWARE,
-                                       NULL,
-                                       #if defined(_DEBUG)
-                                       D3D11_CREATE_DEVICE_DEBUG,
-                                       #else
-                                       0,
-                                       #endif
-                                       featureLevels,
-                                       ArraySize(featureLevels),
-                                       D3D11_SDK_VERSION,
-                                       &dummyDevice,
-                                       &dummyFeatureLevel,
-                                       &dummyContext);
-
-    if (!mDevice || FAILED(result))
-    {
-        return false;
-    }
-
-    dummyContext->Release();
-    dummyDevice->Release();
-
-    return true;
-}
-
-void Renderer11::release()
-{
-    releaseDeviceResources();
-
-    if (mDxgiFactory)
-    {
-        mDxgiFactory->Release();
-        mDxgiFactory = NULL;
-    }
-
-    if (mDxgiAdapter)
-    {
-        mDxgiAdapter->Release();
-        mDxgiAdapter = NULL;
-    }
-
-    if (mDeviceContext)
-    {
-        mDeviceContext->ClearState();
-        mDeviceContext->Flush();
-        mDeviceContext->Release();
-        mDeviceContext = NULL;
-    }
-
-    if (mDevice)
-    {
-        mDevice->Release();
-        mDevice = NULL;
-    }
-
-    if (mD3d11Module)
-    {
-        FreeLibrary(mD3d11Module);
-        mD3d11Module = NULL;
-    }
-
-    if (mDxgiModule)
-    {
-        FreeLibrary(mDxgiModule);
-        mDxgiModule = NULL;
-    }
-}
-
-bool Renderer11::resetDevice()
-{
-    // recreate everything
-    release();
-    EGLint result = initialize();
-
-    if (result != EGL_SUCCESS)
-    {
-        ERR("Could not reinitialize D3D11 device: %08X", result);
-        return false;
-    }
-
-    mDeviceLost = false;
-
-    return true;
-}
-
-DWORD Renderer11::getAdapterVendor() const
-{
-    return mAdapterDescription.VendorId;
-}
-
-std::string Renderer11::getRendererDescription() const
-{
-    std::ostringstream rendererString;
-
-    rendererString << mDescription;
-    rendererString << " Direct3D11";
-
-    rendererString << " vs_" << getMajorShaderModel() << "_" << getMinorShaderModel();
-    rendererString << " ps_" << getMajorShaderModel() << "_" << getMinorShaderModel();
-
-    return rendererString.str();
-}
-
-GUID Renderer11::getAdapterIdentifier() const
-{
-    // Use the adapter LUID as our adapter ID
-    // This number is local to a machine is only guaranteed to be unique between restarts
-    META_ASSERT(sizeof(LUID) <= sizeof(GUID));
-    GUID adapterId = {0};
-    memcpy(&adapterId, &mAdapterDescription.AdapterLuid, sizeof(LUID));
-    return adapterId;
-}
-
-bool Renderer11::getBGRATextureSupport() const
-{
-    return mBGRATextureSupport;
-}
-
-bool Renderer11::getDXT1TextureSupport()
-{
-    return mDXT1TextureSupport;
-}
-
-bool Renderer11::getDXT3TextureSupport()
-{
-    return mDXT3TextureSupport;
-}
-
-bool Renderer11::getDXT5TextureSupport()
-{
-    return mDXT5TextureSupport;
-}
-
-bool Renderer11::getDepthTextureSupport() const
-{
-    return mDepthTextureSupport;
-}
-
-bool Renderer11::getFloat32TextureSupport(bool *filtering, bool *renderable)
-{
-    *renderable = mFloat32RenderSupport;
-    *filtering = mFloat32FilterSupport;
-    return mFloat32TextureSupport;
-}
-
-bool Renderer11::getFloat16TextureSupport(bool *filtering, bool *renderable)
-{
-    *renderable = mFloat16RenderSupport;
-    *filtering = mFloat16FilterSupport;
-    return mFloat16TextureSupport;
-}
-
-bool Renderer11::getLuminanceTextureSupport()
-{
-    return false;
-}
-
-bool Renderer11::getLuminanceAlphaTextureSupport()
-{
-    return false;
-}
-
-bool Renderer11::getTextureFilterAnisotropySupport() const
-{
-    return true;
-}
-
-float Renderer11::getTextureMaxAnisotropy() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-        return D3D11_MAX_MAXANISOTROPY;
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return D3D10_MAX_MAXANISOTROPY;
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-        return 16;
-      case D3D_FEATURE_LEVEL_9_1:
-        return D3D_FL9_1_DEFAULT_MAX_ANISOTROPY;
-      default: UNREACHABLE();
-        return 0;
-    }
-}
-
-bool Renderer11::getEventQuerySupport()
-{
-    return true;
-}
-
-Range Renderer11::getViewportBounds() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-        return Range(D3D11_VIEWPORT_BOUNDS_MIN, D3D11_VIEWPORT_BOUNDS_MAX);
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return Range(D3D10_VIEWPORT_BOUNDS_MIN, D3D10_VIEWPORT_BOUNDS_MAX);
-      case D3D_FEATURE_LEVEL_9_3:
-        return Range(D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION * -2, D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION * 2);
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return Range(D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION * -2, D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION * 2);
-      default: UNREACHABLE();
-        return Range(0, 0);
-    }
-}
-
-unsigned int Renderer11::getMaxVertexTextureImageUnits() const
-{
-    META_ASSERT(MAX_TEXTURE_IMAGE_UNITS_VTF_SM4 <= gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS);
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return MAX_TEXTURE_IMAGE_UNITS_VTF_SM4;
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return 0;
-      default: UNREACHABLE();
-        return 0;
-    }
-}
-
-unsigned int Renderer11::getMaxCombinedTextureImageUnits() const
-{
-    return gl::MAX_TEXTURE_IMAGE_UNITS + getMaxVertexTextureImageUnits();
-}
-
-unsigned int Renderer11::getReservedVertexUniformVectors() const
-{
-    return 0;   // Driver uniforms are stored in a separate constant buffer
-}
-
-unsigned int Renderer11::getReservedFragmentUniformVectors() const
-{
-    return 0;   // Driver uniforms are stored in a separate constant buffer
-}
-
-unsigned int Renderer11::getMaxVertexUniformVectors() const
-{
-    META_ASSERT(MAX_VERTEX_UNIFORM_VECTORS_D3D11 <= D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT);
-    ASSERT(mFeatureLevel >= D3D_FEATURE_LEVEL_9_1);
-    return MAX_VERTEX_UNIFORM_VECTORS_D3D11;
-}
-
-unsigned int Renderer11::getMaxFragmentUniformVectors() const
-{
-    META_ASSERT(MAX_FRAGMENT_UNIFORM_VECTORS_D3D11 <= D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT);
-    ASSERT(mFeatureLevel >= D3D_FEATURE_LEVEL_9_1);
-    return MAX_FRAGMENT_UNIFORM_VECTORS_D3D11;
-}
-
-unsigned int Renderer11::getMaxVaryingVectors() const
-{
-    META_ASSERT(gl::IMPLEMENTATION_MAX_VARYING_VECTORS == D3D11_VS_OUTPUT_REGISTER_COUNT);
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-        return D3D11_VS_OUTPUT_REGISTER_COUNT;
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return D3D10_VS_OUTPUT_REGISTER_COUNT;
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return 8;
-      default: UNREACHABLE();
-        return 0;
-    }
-}
-
-bool Renderer11::getNonPower2TextureSupport() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return true;
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return false;
-      default: UNREACHABLE();
-        return false;
-    }
-}
-
-bool Renderer11::getOcclusionQuerySupport() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return true;
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-        return true;
-      case D3D_FEATURE_LEVEL_9_1:
-        return false;
-      default: UNREACHABLE();
-        return false;
-    }
-}
-
-bool Renderer11::getInstancingSupport() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-      case D3D_FEATURE_LEVEL_9_3:
-         return true;
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return false;
-      default: UNREACHABLE();
-        return false;
-    }
-}
-
-bool Renderer11::getShareHandleSupport() const
-{
-    // We only currently support share handles with BGRA surfaces, because
-    // chrome needs BGRA. Once chrome fixes this, we should always support them.
-    // PIX doesn't seem to support using share handles, so disable them.
-    return getBGRATextureSupport() && !gl::perfActive();
-}
-
-bool Renderer11::getDerivativeInstructionSupport() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-        return true;
-      case D3D_FEATURE_LEVEL_9_3:
-        return true;
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return false;
-      default: UNREACHABLE();
-        return false;
-    }
-}
-
-bool Renderer11::getPostSubBufferSupport() const
-{
-    // D3D11 does not support present with dirty rectangles until D3D11.1 and DXGI 1.2.
-    return false;
-}
-
-int Renderer11::getMajorShaderModel() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0: return D3D11_SHADER_MAJOR_VERSION;   // 5
-      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SHADER_MAJOR_VERSION; // 4
-      case D3D_FEATURE_LEVEL_10_0: return D3D10_SHADER_MAJOR_VERSION;   // 4
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MAJOR_VERSION;   // 4 (level 9)
-      default: UNREACHABLE();      return 0;
-    }
-}
-
-int Renderer11::getMinorShaderModel() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0: return D3D11_SHADER_MINOR_VERSION;   // 0
-      case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SHADER_MINOR_VERSION; // 1
-      case D3D_FEATURE_LEVEL_10_0: return D3D10_SHADER_MINOR_VERSION;   // 0
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MINOR_VERSION;   // 0 (level 9)
-      default: UNREACHABLE();      return 0;
-    }
-}
-
-float Renderer11::getMaxPointSize() const
-{
-    // choose a reasonable maximum. we enforce this in the shader.
-    // (nb: on a Radeon 2600xt, DX9 reports a 256 max point size)
-    return 1024.0f;
-}
-
-int Renderer11::getMaxViewportDimension() const
-{
-    // Maximum viewport size must be at least as large as the largest render buffer (or larger).
-    // In our case return the maximum texture size, which is the maximum render buffer size.
-    META_ASSERT(D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION * 2 - 1 <= D3D11_VIEWPORT_BOUNDS_MAX);
-    META_ASSERT(D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION * 2 - 1 <= D3D10_VIEWPORT_BOUNDS_MAX);
-
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0: 
-        return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 16384
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0: 
-        return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 8192
-      case D3D_FEATURE_LEVEL_9_3:
-        return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 4096
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:
-        return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 2048
-      default: UNREACHABLE();      
-        return 0;
-    }
-}
-
-int Renderer11::getMaxTextureWidth() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 16384
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 8192
-      case D3D_FEATURE_LEVEL_9_3: return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 4096
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1: return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 2048
-      default: UNREACHABLE();      return 0;
-    }
-}
-
-int Renderer11::getMaxTextureHeight() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 16384
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 8192
-      case D3D_FEATURE_LEVEL_9_3: return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 4096
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1: return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 2048
-      default: UNREACHABLE();      return 0;
-    }
-}
-
-bool Renderer11::get32BitIndexSupport() const
-{
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0: 
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP >= 32;   // true
-      case D3D_FEATURE_LEVEL_9_3:
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1:  return false;
-      default: UNREACHABLE();      return false;
-    }
-}
-
-int Renderer11::getMinSwapInterval() const
-{
-    return 0;
-}
-
-int Renderer11::getMaxSwapInterval() const
-{
-    return 4;
-}
-
-int Renderer11::getMaxSupportedSamples() const
-{
-    return mMaxSupportedSamples;
-}
-
-int Renderer11::getNearestSupportedSamples(DXGI_FORMAT format, unsigned int requested) const
-{
-    if (requested == 0)
-    {
-        return 0;
-    }
-
-    MultisampleSupportMap::const_iterator iter = mMultisampleSupportMap.find(format);
-    if (iter != mMultisampleSupportMap.end())
-    {
-        const MultisampleSupportInfo& info = iter->second;
-        for (unsigned int i = requested - 1; i < D3D11_MAX_MULTISAMPLE_SAMPLE_COUNT; i++)
-        {
-            if (info.qualityLevels[i] > 0)
-            {
-                return i + 1;
-            }
-        }
-    }
-
-    return -1;
-}
-
-unsigned int Renderer11::getMaxRenderTargets() const
-{
-    META_ASSERT(D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    META_ASSERT(D3D10_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    META_ASSERT(D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-    META_ASSERT(D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-
-    switch (mFeatureLevel)
-    {
-      case D3D_FEATURE_LEVEL_11_0:
-        return D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT;  // 8
-      case D3D_FEATURE_LEVEL_10_1:
-      case D3D_FEATURE_LEVEL_10_0:
-      case D3D_FEATURE_LEVEL_9_3: //  return D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT; // 4
-      case D3D_FEATURE_LEVEL_9_2:
-      case D3D_FEATURE_LEVEL_9_1: //  return D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT; // 1
-        // Feature level 10.0 and 10.1 cards perform very poorly when the pixel shader
-        // outputs to multiple RTs that are not bound.
-        // TODO: Remove pixel shader outputs for render targets that are not bound.
-        return 1;
-      default:
-        UNREACHABLE();
-        return 1;
-    }
-}
-
-bool Renderer11::copyToRenderTarget(TextureStorageInterface2D *dest, TextureStorageInterface2D *source)
-{
-    if (source && dest)
-    {
-        TextureStorage11_2D *source11 = TextureStorage11_2D::makeTextureStorage11_2D(source->getStorageInstance());
-        TextureStorage11_2D *dest11 = TextureStorage11_2D::makeTextureStorage11_2D(dest->getStorageInstance());
-
-        mDeviceContext->CopyResource(dest11->getBaseTexture(), source11->getBaseTexture());
-        return true;
-    }
-
-    return false;
-}
-
-bool Renderer11::copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureStorageInterfaceCube *source)
-{
-    if (source && dest)
-    {
-        TextureStorage11_Cube *source11 = TextureStorage11_Cube::makeTextureStorage11_Cube(source->getStorageInstance());
-        TextureStorage11_Cube *dest11 = TextureStorage11_Cube::makeTextureStorage11_Cube(dest->getStorageInstance());
-
-        mDeviceContext->CopyResource(dest11->getBaseTexture(), source11->getBaseTexture());
-        return true;
-    }
-
-    return false;
-}
-
-bool Renderer11::copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level)
-{
-    gl::Renderbuffer *colorbuffer = framebuffer->getReadColorbuffer();
-    if (!colorbuffer)
-    {
-        ERR("Failed to retrieve the color buffer from the frame buffer.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    RenderTarget11 *sourceRenderTarget = RenderTarget11::makeRenderTarget11(colorbuffer->getRenderTarget());
-    if (!sourceRenderTarget)
-    {
-        ERR("Failed to retrieve the render target from the frame buffer.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    ID3D11ShaderResourceView *source = sourceRenderTarget->getShaderResourceView();
-    if (!source)
-    {
-        ERR("Failed to retrieve the render target view from the render target.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    TextureStorage11_2D *storage11 = TextureStorage11_2D::makeTextureStorage11_2D(storage->getStorageInstance());
-    if (!storage11)
-    {
-        ERR("Failed to retrieve the texture storage from the destination.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    RenderTarget11 *destRenderTarget = RenderTarget11::makeRenderTarget11(storage11->getRenderTarget(level));
-    if (!destRenderTarget)
-    {
-        ERR("Failed to retrieve the render target from the destination storage.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    ID3D11RenderTargetView *dest = destRenderTarget->getRenderTargetView();
-    if (!dest)
-    {
-        ERR("Failed to retrieve the render target view from the destination render target.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    gl::Rectangle destRect;
-    destRect.x = xoffset;
-    destRect.y = yoffset;
-    destRect.width = sourceRect.width;
-    destRect.height = sourceRect.height;
-
-    bool ret = copyTexture(source, sourceRect, sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(),
-                           dest, destRect, destRenderTarget->getWidth(), destRenderTarget->getHeight(), destFormat);
-
-    return ret;
-}
-
-bool Renderer11::copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level)
-{
-    gl::Renderbuffer *colorbuffer = framebuffer->getReadColorbuffer();
-    if (!colorbuffer)
-    {
-        ERR("Failed to retrieve the color buffer from the frame buffer.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    RenderTarget11 *sourceRenderTarget = RenderTarget11::makeRenderTarget11(colorbuffer->getRenderTarget());
-    if (!sourceRenderTarget)
-    {
-        ERR("Failed to retrieve the render target from the frame buffer.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    ID3D11ShaderResourceView *source = sourceRenderTarget->getShaderResourceView();
-    if (!source)
-    {
-        ERR("Failed to retrieve the render target view from the render target.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    TextureStorage11_Cube *storage11 = TextureStorage11_Cube::makeTextureStorage11_Cube(storage->getStorageInstance());
-    if (!storage11)
-    {
-        ERR("Failed to retrieve the texture storage from the destination.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    RenderTarget11 *destRenderTarget = RenderTarget11::makeRenderTarget11(storage11->getRenderTarget(target, level));
-    if (!destRenderTarget)
-    {
-        ERR("Failed to retrieve the render target from the destination storage.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    ID3D11RenderTargetView *dest = destRenderTarget->getRenderTargetView();
-    if (!dest)
-    {
-        ERR("Failed to retrieve the render target view from the destination render target.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    gl::Rectangle destRect;
-    destRect.x = xoffset;
-    destRect.y = yoffset;
-    destRect.width = sourceRect.width;
-    destRect.height = sourceRect.height;
-
-    bool ret = copyTexture(source, sourceRect, sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(),
-                           dest, destRect, destRenderTarget->getWidth(), destRenderTarget->getHeight(), destFormat);
-
-    return ret;
-}
-
-bool Renderer11::copyTexture(ID3D11ShaderResourceView *source, const gl::Rectangle &sourceArea, unsigned int sourceWidth, unsigned int sourceHeight,
-                             ID3D11RenderTargetView *dest, const gl::Rectangle &destArea, unsigned int destWidth, unsigned int destHeight, GLenum destFormat)
-{
-    HRESULT result;
-
-    if (!mCopyResourcesInitialized)
-    {
-        ASSERT(!mCopyVB && !mCopySampler && !mCopyIL && !mCopyVS && !mCopyRGBAPS && !mCopyRGBPS && !mCopyLumPS && !mCopyLumAlphaPS);
-
-        D3D11_BUFFER_DESC vbDesc;
-        vbDesc.ByteWidth = sizeof(d3d11::PositionTexCoordVertex) * 4;
-        vbDesc.Usage = D3D11_USAGE_DYNAMIC;
-        vbDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
-        vbDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
-        vbDesc.MiscFlags = 0;
-        vbDesc.StructureByteStride = 0;
-
-        result = mDevice->CreateBuffer(&vbDesc, NULL, &mCopyVB);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyVB, "Renderer11 copy texture vertex buffer");
-
-        D3D11_SAMPLER_DESC samplerDesc;
-        samplerDesc.Filter = D3D11_FILTER_MIN_MAG_MIP_LINEAR;
-        samplerDesc.AddressU = D3D11_TEXTURE_ADDRESS_CLAMP;
-        samplerDesc.AddressV = D3D11_TEXTURE_ADDRESS_CLAMP;
-        samplerDesc.AddressW = D3D11_TEXTURE_ADDRESS_CLAMP;
-        samplerDesc.MipLODBias = 0.0f;
-        samplerDesc.MaxAnisotropy = 0;
-        samplerDesc.ComparisonFunc = D3D11_COMPARISON_NEVER;
-        samplerDesc.BorderColor[0] = 0.0f;
-        samplerDesc.BorderColor[1] = 0.0f;
-        samplerDesc.BorderColor[2] = 0.0f;
-        samplerDesc.BorderColor[3] = 0.0f;
-        samplerDesc.MinLOD = 0.0f;
-        samplerDesc.MaxLOD = mDevice->GetFeatureLevel() >= D3D_FEATURE_LEVEL_10_0 ? 0.0f : FLT_MAX;
-
-        result = mDevice->CreateSamplerState(&samplerDesc, &mCopySampler);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopySampler, "Renderer11 copy sampler");
-
-        D3D11_INPUT_ELEMENT_DESC quadLayout[] =
-        {
-            { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
-            { "TEXCOORD", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 8, D3D11_INPUT_PER_VERTEX_DATA, 0 },
-        };
-
-        result = mDevice->CreateInputLayout(quadLayout, 2, g_VS_Passthrough, sizeof(g_VS_Passthrough), &mCopyIL);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyIL, "Renderer11 copy texture input layout");
-
-        result = mDevice->CreateVertexShader(g_VS_Passthrough, sizeof(g_VS_Passthrough), NULL, &mCopyVS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyVS, "Renderer11 copy texture vertex shader");
-
-        result = mDevice->CreatePixelShader(g_PS_PassthroughRGBA, sizeof(g_PS_PassthroughRGBA), NULL, &mCopyRGBAPS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyRGBAPS, "Renderer11 copy texture RGBA pixel shader");
-
-        result = mDevice->CreatePixelShader(g_PS_PassthroughRGB, sizeof(g_PS_PassthroughRGB), NULL, &mCopyRGBPS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyRGBPS, "Renderer11 copy texture RGB pixel shader");
-
-        result = mDevice->CreatePixelShader(g_PS_PassthroughLum, sizeof(g_PS_PassthroughLum), NULL, &mCopyLumPS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyLumPS, "Renderer11 copy texture luminance pixel shader");
-
-        result = mDevice->CreatePixelShader(g_PS_PassthroughLumAlpha, sizeof(g_PS_PassthroughLumAlpha), NULL, &mCopyLumAlphaPS);
-        ASSERT(SUCCEEDED(result));
-        d3d11::SetDebugName(mCopyLumAlphaPS, "Renderer11 copy texture luminance alpha pixel shader");
-
-        mCopyResourcesInitialized = true;
-    }
-
-    // Verify the source and destination area sizes
-    if (sourceArea.x < 0 || sourceArea.x + sourceArea.width > static_cast<int>(sourceWidth) ||
-        sourceArea.y < 0 || sourceArea.y + sourceArea.height > static_cast<int>(sourceHeight) ||
-        destArea.x < 0 || destArea.x + destArea.width > static_cast<int>(destWidth) ||
-        destArea.y < 0 || destArea.y + destArea.height > static_cast<int>(destHeight))
-    {
-        return gl::error(GL_INVALID_VALUE, false);
-    }
-
-    // Set vertices
-    D3D11_MAPPED_SUBRESOURCE mappedResource;
-    result = mDeviceContext->Map(mCopyVB, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
-    if (FAILED(result))
-    {
-        ERR("Failed to map vertex buffer for texture copy, HRESULT: 0x%X.", result);
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    d3d11::PositionTexCoordVertex *vertices = static_cast<d3d11::PositionTexCoordVertex*>(mappedResource.pData);
-
-    // Create a quad in homogeneous coordinates
-    float x1 = (destArea.x / float(destWidth)) * 2.0f - 1.0f;
-    float y1 = ((destHeight - destArea.y - destArea.height) / float(destHeight)) * 2.0f - 1.0f;
-    float x2 = ((destArea.x + destArea.width) / float(destWidth)) * 2.0f - 1.0f;
-    float y2 = ((destHeight - destArea.y) / float(destHeight)) * 2.0f - 1.0f;
-
-    float u1 = sourceArea.x / float(sourceWidth);
-    float v1 = sourceArea.y / float(sourceHeight);
-    float u2 = (sourceArea.x + sourceArea.width) / float(sourceWidth);
-    float v2 = (sourceArea.y + sourceArea.height) / float(sourceHeight);
-
-    d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, u1, v2);
-    d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, u1, v1);
-    d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, u2, v2);
-    d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, u2, v1);
-
-    mDeviceContext->Unmap(mCopyVB, 0);
-
-    static UINT stride = sizeof(d3d11::PositionTexCoordVertex);
-    static UINT startIdx = 0;
-    mDeviceContext->IASetVertexBuffers(0, 1, &mCopyVB, &stride, &startIdx);
-
-    // Apply state
-    mDeviceContext->OMSetBlendState(NULL, NULL, 0xFFFFFFF);
-    mDeviceContext->OMSetDepthStencilState(NULL, 0xFFFFFFFF);
-    mDeviceContext->RSSetState(NULL);
-
-    // Apply shaders
-    mDeviceContext->IASetInputLayout(mCopyIL);
-    mDeviceContext->IASetPrimitiveTopology(D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP);
-    mDeviceContext->VSSetShader(mCopyVS, NULL, 0);
-
-    ID3D11PixelShader *ps = NULL;
-    switch(destFormat)
-    {
-      case GL_RGBA:            ps = mCopyRGBAPS;     break;
-      case GL_RGB:             ps = mCopyRGBPS;      break;
-      case GL_ALPHA:           ps = mCopyRGBAPS;     break;
-      case GL_BGRA_EXT:        ps = mCopyRGBAPS;     break;
-      case GL_LUMINANCE:       ps = mCopyLumPS;      break;
-      case GL_LUMINANCE_ALPHA: ps = mCopyLumAlphaPS; break;
-      default: UNREACHABLE();  ps = NULL;            break;
-    }
-
-    mDeviceContext->PSSetShader(ps, NULL, 0);
-    mDeviceContext->GSSetShader(NULL, NULL, 0);
-
-    // Unset the currently bound shader resource to avoid conflicts
-    static ID3D11ShaderResourceView *const nullSRV = NULL;
-    mDeviceContext->PSSetShaderResources(0, 1, &nullSRV);
-
-    // Apply render target
-    setOneTimeRenderTarget(dest);
-
-    // Set the viewport
-    D3D11_VIEWPORT viewport;
-    viewport.TopLeftX = 0;
-    viewport.TopLeftY = 0;
-    viewport.Width = destWidth;
-    viewport.Height = destHeight;
-    viewport.MinDepth = 0.0f;
-    viewport.MaxDepth = 1.0f;
-    mDeviceContext->RSSetViewports(1, &viewport);
-
-    // Apply textures
-    mDeviceContext->PSSetShaderResources(0, 1, &source);
-    mDeviceContext->PSSetSamplers(0, 1, &mCopySampler);
-
-    // Draw the quad
-    mDeviceContext->Draw(4, 0);
-
-    // Unbind textures and render targets and vertex buffer
-    mDeviceContext->PSSetShaderResources(0, 1, &nullSRV);
-
-    unapplyRenderTargets();
-
-    UINT zero = 0;
-    ID3D11Buffer *const nullBuffer = NULL;
-    mDeviceContext->IASetVertexBuffers(0, 1, &nullBuffer, &zero, &zero);
-
-    markAllStateDirty();
-
-    return true;
-}
-
-void Renderer11::unapplyRenderTargets()
-{
-    setOneTimeRenderTarget(NULL);
-}
-
-void Renderer11::setOneTimeRenderTarget(ID3D11RenderTargetView *renderTargetView)
-{
-    ID3D11RenderTargetView *rtvArray[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS] = {NULL};
-
-    rtvArray[0] = renderTargetView;
-
-    mDeviceContext->OMSetRenderTargets(getMaxRenderTargets(), rtvArray, NULL);
-
-    // Do not preserve the serial for this one-time-use render target
-    for (unsigned int rtIndex = 0; rtIndex < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; rtIndex++)
-    {
-        mAppliedRenderTargetSerials[rtIndex] = 0;
-    }
-}
-
-RenderTarget *Renderer11::createRenderTarget(SwapChain *swapChain, bool depth)
-{
-    SwapChain11 *swapChain11 = SwapChain11::makeSwapChain11(swapChain);
-    RenderTarget11 *renderTarget = NULL;
-
-    if (depth)
-    {
-        // Note: depth stencil may be NULL for 0 sized surfaces
-        renderTarget = new RenderTarget11(this, swapChain11->getDepthStencil(),
-                                          swapChain11->getDepthStencilTexture(), NULL,
-                                          swapChain11->getWidth(), swapChain11->getHeight());
-    }
-    else
-    {
-        // Note: render target may be NULL for 0 sized surfaces
-        renderTarget = new RenderTarget11(this, swapChain11->getRenderTarget(),
-                                          swapChain11->getOffscreenTexture(),
-                                          swapChain11->getRenderTargetShaderResource(),
-                                          swapChain11->getWidth(), swapChain11->getHeight());
-    }
-    return renderTarget;
-}
-
-RenderTarget *Renderer11::createRenderTarget(int width, int height, GLenum format, GLsizei samples, bool depth)
-{
-    RenderTarget11 *renderTarget = new RenderTarget11(this, width, height, format, samples, depth);
-    return renderTarget;
-}
-
-ShaderExecutable *Renderer11::loadExecutable(const void *function, size_t length, rx::ShaderType type)
-{
-    ShaderExecutable11 *executable = NULL;
-
-    switch (type)
-    {
-      case rx::SHADER_VERTEX:
-        {
-            ID3D11VertexShader *vshader = NULL;
-            HRESULT result = mDevice->CreateVertexShader(function, length, NULL, &vshader);
-            ASSERT(SUCCEEDED(result));
-
-            if (vshader)
-            {
-                executable = new ShaderExecutable11(function, length, vshader);
-            }
-        }
-        break;
-      case rx::SHADER_PIXEL:
-        {
-            ID3D11PixelShader *pshader = NULL;
-            HRESULT result = mDevice->CreatePixelShader(function, length, NULL, &pshader);
-            ASSERT(SUCCEEDED(result));
-
-            if (pshader)
-            {
-                executable = new ShaderExecutable11(function, length, pshader);
-            }
-        }
-        break;
-      case rx::SHADER_GEOMETRY:
-        {
-            ID3D11GeometryShader *gshader = NULL;
-            HRESULT result = mDevice->CreateGeometryShader(function, length, NULL, &gshader);
-            ASSERT(SUCCEEDED(result));
-
-            if (gshader)
-            {
-                executable = new ShaderExecutable11(function, length, gshader);
-            }
-        }
-        break;
-      default:
-        UNREACHABLE();
-        break;
-    }
-
-    return executable;
-}
-
-ShaderExecutable *Renderer11::compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type, D3DWorkaroundType workaround)
-{
-    std::string profile;
-
-    switch (type)
-    {
-      case rx::SHADER_VERTEX:
-        profile = "vs_4_0";
-        break;
-      case rx::SHADER_PIXEL:
-        profile = "ps_4_0";
-        break;
-      case rx::SHADER_GEOMETRY:
-        profile = "gs_4_0";
-        break;
-      default:
-        UNREACHABLE();
-        return NULL;
-    }
-
-    if (mFeatureLevel == D3D_FEATURE_LEVEL_9_3)
-        profile += "_level_9_3";
-    else if (mFeatureLevel == D3D_FEATURE_LEVEL_9_2 || mFeatureLevel == D3D_FEATURE_LEVEL_9_1)
-        profile += "_level_9_1";
-
-    ID3DBlob *binary = (ID3DBlob*)compileToBinary(infoLog, shaderHLSL, profile.c_str(), D3DCOMPILE_OPTIMIZATION_LEVEL0, false);
-    if (!binary)
-        return NULL;
-
-    ShaderExecutable *executable = loadExecutable((DWORD *)binary->GetBufferPointer(), binary->GetBufferSize(), type);
-    binary->Release();
-
-    return executable;
-}
-
-VertexBuffer *Renderer11::createVertexBuffer()
-{
-    return new VertexBuffer11(this);
-}
-
-IndexBuffer *Renderer11::createIndexBuffer()
-{
-    return new IndexBuffer11(this);
-}
-
-BufferStorage *Renderer11::createBufferStorage()
-{
-    return new BufferStorage11(this);
-}
-
-QueryImpl *Renderer11::createQuery(GLenum type)
-{
-    return new Query11(this, type);
-}
-
-FenceImpl *Renderer11::createFence()
-{
-    return new Fence11(this);
-}
-
-bool Renderer11::getRenderTargetResource(gl::Renderbuffer *colorbuffer, unsigned int *subresourceIndex, ID3D11Texture2D **resource)
-{
-    ASSERT(colorbuffer != NULL);
-
-    RenderTarget11 *renderTarget = RenderTarget11::makeRenderTarget11(colorbuffer->getRenderTarget());
-    if (renderTarget)
-    {
-        *subresourceIndex = renderTarget->getSubresourceIndex();
-
-        ID3D11RenderTargetView *colorBufferRTV = renderTarget->getRenderTargetView();
-        if (colorBufferRTV)
-        {
-            ID3D11Resource *textureResource = NULL;
-            colorBufferRTV->GetResource(&textureResource);
-
-            if (textureResource)
-            {
-                HRESULT result = textureResource->QueryInterface(IID_ID3D11Texture2D, (void**)resource);
-                textureResource->Release();
-
-                if (SUCCEEDED(result))
-                {
-                    return true;
-                }
-                else
-                {
-                    ERR("Failed to extract the ID3D11Texture2D from the render target resource, "
-                        "HRESULT: 0x%X.", result);
-                }
-            }
-        }
-    }
-
-    return false;
-}
-
-bool Renderer11::blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
-                          bool blitRenderTarget, bool blitDepthStencil)
-{
-    if (blitRenderTarget)
-    {
-        gl::Renderbuffer *readBuffer = readTarget->getReadColorbuffer();
-
-        if (!readBuffer)
-        {
-            ERR("Failed to retrieve the read buffer from the read framebuffer.");
-            return gl::error(GL_OUT_OF_MEMORY, false);
-        }
-
-        RenderTarget *readRenderTarget = readBuffer->getRenderTarget();
-
-        for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
-        {
-            if (drawTarget->isEnabledColorAttachment(colorAttachment))
-            {
-                gl::Renderbuffer *drawBuffer = drawTarget->getColorbuffer(colorAttachment);
-
-                if (!drawBuffer)
-                {
-                    ERR("Failed to retrieve the draw buffer from the draw framebuffer.");
-                    return gl::error(GL_OUT_OF_MEMORY, false);
-                }
-
-                RenderTarget *drawRenderTarget = drawBuffer->getRenderTarget();
-
-                if (!blitRenderbufferRect(readRect, drawRect, readRenderTarget, drawRenderTarget, false))
-                {
-                    return false;
-                }
-            }
-        }
-    }
-
-    if (blitDepthStencil)
-    {
-        gl::Renderbuffer *readBuffer = readTarget->getDepthOrStencilbuffer();
-        gl::Renderbuffer *drawBuffer = drawTarget->getDepthOrStencilbuffer();
-
-        if (!readBuffer)
-        {
-            ERR("Failed to retrieve the read depth-stencil buffer from the read framebuffer.");
-            return gl::error(GL_OUT_OF_MEMORY, false);
-        }
-
-        if (!drawBuffer)
-        {
-            ERR("Failed to retrieve the draw depth-stencil buffer from the draw framebuffer.");
-            return gl::error(GL_OUT_OF_MEMORY, false);
-        }
-
-        RenderTarget *readRenderTarget = readBuffer->getDepthStencil();
-        RenderTarget *drawRenderTarget = drawBuffer->getDepthStencil();
-
-        if (!blitRenderbufferRect(readRect, drawRect, readRenderTarget, drawRenderTarget, true))
-        {
-            return false;
-        }
-    }
-
-    return true;
-}
-
-void Renderer11::readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type,
-                            GLsizei outputPitch, bool packReverseRowOrder, GLint packAlignment, void* pixels)
-{
-    ID3D11Texture2D *colorBufferTexture = NULL;
-    unsigned int subresourceIndex = 0;
-
-    gl::Renderbuffer *colorbuffer = framebuffer->getReadColorbuffer();
-
-    if (colorbuffer && getRenderTargetResource(colorbuffer, &subresourceIndex, &colorBufferTexture))
-    {
-        gl::Rectangle area;
-        area.x = x;
-        area.y = y;
-        area.width = width;
-        area.height = height;
-
-        readTextureData(colorBufferTexture, subresourceIndex, area, colorbuffer->getActualFormat(), format, type, outputPitch,
-                        packReverseRowOrder, packAlignment, pixels);
-
-        colorBufferTexture->Release();
-        colorBufferTexture = NULL;
-    }
-}
-
-Image *Renderer11::createImage()
-{
-    return new Image11();
-}
-
-void Renderer11::generateMipmap(Image *dest, Image *src)
-{
-    Image11 *dest11 = Image11::makeImage11(dest);
-    Image11 *src11 = Image11::makeImage11(src);
-    Image11::generateMipmap(dest11, src11);
-}
-
-TextureStorage *Renderer11::createTextureStorage2D(SwapChain *swapChain)
-{
-    SwapChain11 *swapChain11 = SwapChain11::makeSwapChain11(swapChain);
-    return new TextureStorage11_2D(this, swapChain11);
-}
-
-TextureStorage *Renderer11::createTextureStorage2D(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height)
-{
-    return new TextureStorage11_2D(this, levels, internalformat, usage, forceRenderable, width, height);
-}
-
-TextureStorage *Renderer11::createTextureStorageCube(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size)
-{
-    return new TextureStorage11_Cube(this, levels, internalformat, usage, forceRenderable, size);
-}
-
-static inline unsigned int getFastPixelCopySize(DXGI_FORMAT sourceFormat, GLenum sourceGLFormat, GLenum destFormat, GLenum destType)
-{
-    if (sourceFormat == DXGI_FORMAT_A8_UNORM &&
-        destFormat   == GL_ALPHA &&
-        destType     == GL_UNSIGNED_BYTE)
-    {
-        return 1;
-    }
-    else if (sourceFormat   == DXGI_FORMAT_R8G8B8A8_UNORM &&
-             sourceGLFormat == GL_RGBA8_OES &&
-             destFormat     == GL_RGBA &&
-             destType       == GL_UNSIGNED_BYTE)
-    {
-        return 4;
-    }
-    else if (sourceFormat == DXGI_FORMAT_B8G8R8A8_UNORM &&
-             destFormat   == GL_BGRA_EXT &&
-             destType     == GL_UNSIGNED_BYTE)
-    {
-        return 4;
-    }
-    else if (sourceFormat   == DXGI_FORMAT_R16G16B16A16_FLOAT &&
-             sourceGLFormat == GL_RGBA16F_EXT &&
-             destFormat     == GL_RGBA &&
-             destType       == GL_HALF_FLOAT_OES)
-    {
-        return 8;
-    }
-    else if (sourceFormat == DXGI_FORMAT_R32G32B32_FLOAT &&
-             destFormat   == GL_RGB &&
-             destType     == GL_FLOAT)
-    {
-        return 12;
-    }
-    else if (sourceFormat   == DXGI_FORMAT_R32G32B32A32_FLOAT &&
-             sourceGLFormat == GL_RGBA32F_EXT &&
-             destFormat     == GL_RGBA &&
-             destType       == GL_FLOAT)
-    {
-        return 16;
-    }
-    else
-    {
-        return 0;
-    }
-}
-
-static inline void readPixelColor(const unsigned char *data, DXGI_FORMAT format, GLenum glFormat, unsigned int x,
-                                  unsigned int y, int inputPitch, gl::Color *outColor)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_R8G8B8A8_UNORM:
-        {
-            unsigned int rgba = *reinterpret_cast<const unsigned int*>(data + 4 * x + y * inputPitch);
-            outColor->red =   (rgba & 0x000000FF) * (1.0f / 0x000000FF);
-            outColor->green = (rgba & 0x0000FF00) * (1.0f / 0x0000FF00);
-            outColor->blue =  (rgba & 0x00FF0000) * (1.0f / 0x00FF0000);
-
-            if (gl::GetAlphaSize(glFormat) > 0)
-            {
-                outColor->alpha = (rgba & 0xFF000000) * (1.0f / 0xFF000000);
-            }
-            else
-            {
-                outColor->alpha = 1.0f;
-            }
-        }
-        break;
-
-      case DXGI_FORMAT_A8_UNORM:
-        {
-            outColor->red =   0.0f;
-            outColor->green = 0.0f;
-            outColor->blue =  0.0f;
-            outColor->alpha = *(data + x + y * inputPitch) / 255.0f;
-        }
-        break;
-
-      case DXGI_FORMAT_R32G32B32A32_FLOAT:
-        {
-            outColor->red =   *(reinterpret_cast<const float*>(data + 16 * x + y * inputPitch) + 0);
-            outColor->green = *(reinterpret_cast<const float*>(data + 16 * x + y * inputPitch) + 1);
-            outColor->blue =  *(reinterpret_cast<const float*>(data + 16 * x + y * inputPitch) + 2);
-
-            if (gl::GetAlphaSize(glFormat) > 0)
-            {
-                outColor->alpha = *(reinterpret_cast<const float*>(data + 16 * x + y * inputPitch) + 3);
-            }
-            else
-            {
-                outColor->alpha = 1.0f;
-            }
-        }
-        break;
-
-      case DXGI_FORMAT_R32G32B32_FLOAT:
-        {
-            outColor->red =   *(reinterpret_cast<const float*>(data + 12 * x + y * inputPitch) + 0);
-            outColor->green = *(reinterpret_cast<const float*>(data + 12 * x + y * inputPitch) + 1);
-            outColor->blue =  *(reinterpret_cast<const float*>(data + 12 * x + y * inputPitch) + 2);
-            outColor->alpha = 1.0f;
-        }
-        break;
-
-      case DXGI_FORMAT_R16G16B16A16_FLOAT:
-        {
-            outColor->red =   gl::float16ToFloat32(*(reinterpret_cast<const unsigned short*>(data + 8 * x + y * inputPitch) + 0));
-            outColor->green = gl::float16ToFloat32(*(reinterpret_cast<const unsigned short*>(data + 8 * x + y * inputPitch) + 1));
-            outColor->blue =  gl::float16ToFloat32(*(reinterpret_cast<const unsigned short*>(data + 8 * x + y * inputPitch) + 2));
-
-            if (gl::GetAlphaSize(glFormat) > 0)
-            {
-                outColor->alpha = gl::float16ToFloat32(*(reinterpret_cast<const unsigned short*>(data + 8 * x + y * inputPitch) + 3));
-            }
-            else
-            {
-                outColor->alpha = 1.0f;
-            }
-        }
-        break;
-
-      case DXGI_FORMAT_B8G8R8A8_UNORM:
-        {
-            unsigned int bgra = *reinterpret_cast<const unsigned int*>(data + 4 * x + y * inputPitch);
-            outColor->red =   (bgra & 0x00FF0000) * (1.0f / 0x00FF0000);
-            outColor->blue =  (bgra & 0x000000FF) * (1.0f / 0x000000FF);
-            outColor->green = (bgra & 0x0000FF00) * (1.0f / 0x0000FF00);
-            outColor->alpha = (bgra & 0xFF000000) * (1.0f / 0xFF000000);
-        }
-        break;
-
-      case DXGI_FORMAT_R8_UNORM:
-        {
-            outColor->red =   *(data + x + y * inputPitch) / 255.0f;
-            outColor->green = 0.0f;
-            outColor->blue =  0.0f;
-            outColor->alpha = 1.0f;
-        }
-        break;
-
-      case DXGI_FORMAT_R8G8_UNORM:
-        {
-            unsigned short rg = *reinterpret_cast<const unsigned short*>(data + 2 * x + y * inputPitch);
-
-            outColor->red =   (rg & 0xFF00) * (1.0f / 0xFF00);
-            outColor->green = (rg & 0x00FF) * (1.0f / 0x00FF);
-            outColor->blue =  0.0f;
-            outColor->alpha = 1.0f;
-        }
-        break;
-
-      case DXGI_FORMAT_R16_FLOAT:
-        {
-            outColor->red =   gl::float16ToFloat32(*reinterpret_cast<const unsigned short*>(data + 2 * x + y * inputPitch));
-            outColor->green = 0.0f;
-            outColor->blue =  0.0f;
-            outColor->alpha = 1.0f;
-        }
-        break;
-
-      case DXGI_FORMAT_R16G16_FLOAT:
-        {
-            outColor->red =   gl::float16ToFloat32(*(reinterpret_cast<const unsigned short*>(data + 4 * x + y * inputPitch) + 0));
-            outColor->green = gl::float16ToFloat32(*(reinterpret_cast<const unsigned short*>(data + 4 * x + y * inputPitch) + 1));
-            outColor->blue =  0.0f;
-            outColor->alpha = 1.0f;
-        }
-        break;
-
-      default:
-        ERR("ReadPixelColor not implemented for DXGI format %u.", format);
-        UNIMPLEMENTED();
-        break;
-    }
-}
-
-static inline void writePixelColor(const gl::Color &color, GLenum format, GLenum type, unsigned int x,
-                                   unsigned int y, int outputPitch, void *outData)
-{
-    unsigned char* byteData = reinterpret_cast<unsigned char*>(outData);
-    unsigned short* shortData = reinterpret_cast<unsigned short*>(outData);
-
-    switch (format)
-    {
-      case GL_RGBA:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:
-            byteData[4 * x + y * outputPitch + 0] = static_cast<unsigned char>(255 * color.red   + 0.5f);
-            byteData[4 * x + y * outputPitch + 1] = static_cast<unsigned char>(255 * color.green + 0.5f);
-            byteData[4 * x + y * outputPitch + 2] = static_cast<unsigned char>(255 * color.blue  + 0.5f);
-            byteData[4 * x + y * outputPitch + 3] = static_cast<unsigned char>(255 * color.alpha + 0.5f);
-            break;
-
-          default:
-            ERR("WritePixelColor not implemented for format GL_RGBA and type 0x%X.", type);
-            UNIMPLEMENTED();
-            break;
-        }
-        break;
-
-      case GL_BGRA_EXT:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:
-            byteData[4 * x + y * outputPitch + 0] = static_cast<unsigned char>(255 * color.blue  + 0.5f);
-            byteData[4 * x + y * outputPitch + 1] = static_cast<unsigned char>(255 * color.green + 0.5f);
-            byteData[4 * x + y * outputPitch + 2] = static_cast<unsigned char>(255 * color.red   + 0.5f);
-            byteData[4 * x + y * outputPitch + 3] = static_cast<unsigned char>(255 * color.alpha + 0.5f);
-            break;
-
-          case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:
-            // According to the desktop GL spec in the "Transfer of Pixel Rectangles" section
-            // this type is packed as follows:
-            //   15   14   13   12   11   10    9    8    7    6    5    4    3    2    1    0
-            //  --------------------------------------------------------------------------------
-            // |       4th         |        3rd         |        2nd        |   1st component   |
-            //  --------------------------------------------------------------------------------
-            // in the case of BGRA_EXT, B is the first component, G the second, and so forth.
-            shortData[x + y * outputPitch / sizeof(unsigned short)] =
-                (static_cast<unsigned short>(15 * color.alpha + 0.5f) << 12) |
-                (static_cast<unsigned short>(15 * color.red   + 0.5f) <<  8) |
-                (static_cast<unsigned short>(15 * color.green + 0.5f) <<  4) |
-                (static_cast<unsigned short>(15 * color.blue  + 0.5f) <<  0);
-            break;
-
-          case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:
-            // According to the desktop GL spec in the "Transfer of Pixel Rectangles" section
-            // this type is packed as follows:
-            //   15   14   13   12   11   10    9    8    7    6    5    4    3    2    1    0
-            //  --------------------------------------------------------------------------------
-            // | 4th |          3rd           |           2nd          |      1st component     |
-            //  --------------------------------------------------------------------------------
-            // in the case of BGRA_EXT, B is the first component, G the second, and so forth.
-            shortData[x + y * outputPitch / sizeof(unsigned short)] =
-                (static_cast<unsigned short>(     color.alpha + 0.5f) << 15) |
-                (static_cast<unsigned short>(31 * color.red   + 0.5f) << 10) |
-                (static_cast<unsigned short>(31 * color.green + 0.5f) <<  5) |
-                (static_cast<unsigned short>(31 * color.blue  + 0.5f) <<  0);
-            break;
-
-          default:
-            ERR("WritePixelColor not implemented for format GL_BGRA_EXT and type 0x%X.", type);
-            UNIMPLEMENTED();
-            break;
-        }
-        break;
-
-      case GL_RGB:
-        switch (type)
-        {
-          case GL_UNSIGNED_SHORT_5_6_5:
-            shortData[x + y * outputPitch / sizeof(unsigned short)] =
-                (static_cast<unsigned short>(31 * color.blue  + 0.5f) <<  0) |
-                (static_cast<unsigned short>(63 * color.green + 0.5f) <<  5) |
-                (static_cast<unsigned short>(31 * color.red   + 0.5f) << 11);
-            break;
-
-          case GL_UNSIGNED_BYTE:
-            byteData[3 * x + y * outputPitch + 0] = static_cast<unsigned char>(255 * color.red +   0.5f);
-            byteData[3 * x + y * outputPitch + 1] = static_cast<unsigned char>(255 * color.green + 0.5f);
-            byteData[3 * x + y * outputPitch + 2] = static_cast<unsigned char>(255 * color.blue +  0.5f);
-            break;
-
-          default:
-            ERR("WritePixelColor not implemented for format GL_RGB and type 0x%X.", type);
-            UNIMPLEMENTED();
-            break;
-        }
-        break;
-
-      default:
-        ERR("WritePixelColor not implemented for format 0x%X.", format);
-        UNIMPLEMENTED();
-        break;
-    }
-}
-
-void Renderer11::readTextureData(ID3D11Texture2D *texture, unsigned int subResource, const gl::Rectangle &area,
-                                 GLenum sourceFormat, GLenum format, GLenum type, GLsizei outputPitch, bool packReverseRowOrder,
-                                 GLint packAlignment, void *pixels)
-{
-    D3D11_TEXTURE2D_DESC textureDesc;
-    texture->GetDesc(&textureDesc);
-
-    D3D11_TEXTURE2D_DESC stagingDesc;
-    stagingDesc.Width = area.width;
-    stagingDesc.Height = area.height;
-    stagingDesc.MipLevels = 1;
-    stagingDesc.ArraySize = 1;
-    stagingDesc.Format = textureDesc.Format;
-    stagingDesc.SampleDesc.Count = 1;
-    stagingDesc.SampleDesc.Quality = 0;
-    stagingDesc.Usage = D3D11_USAGE_STAGING;
-    stagingDesc.BindFlags = 0;
-    stagingDesc.CPUAccessFlags = D3D11_CPU_ACCESS_READ;
-    stagingDesc.MiscFlags = 0;
-
-    ID3D11Texture2D* stagingTex = NULL;
-    HRESULT result = mDevice->CreateTexture2D(&stagingDesc, NULL, &stagingTex);
-    if (FAILED(result))
-    {
-        ERR("Failed to create staging texture for readPixels, HRESULT: 0x%X.", result);
-        return;
-    }
-
-    ID3D11Texture2D* srcTex = NULL;
-    if (textureDesc.SampleDesc.Count > 1)
-    {
-        D3D11_TEXTURE2D_DESC resolveDesc;
-        resolveDesc.Width = textureDesc.Width;
-        resolveDesc.Height = textureDesc.Height;
-        resolveDesc.MipLevels = 1;
-        resolveDesc.ArraySize = 1;
-        resolveDesc.Format = textureDesc.Format;
-        resolveDesc.SampleDesc.Count = 1;
-        resolveDesc.SampleDesc.Quality = 0;
-        resolveDesc.Usage = D3D11_USAGE_DEFAULT;
-        resolveDesc.BindFlags = 0;
-        resolveDesc.CPUAccessFlags = 0;
-        resolveDesc.MiscFlags = 0;
-
-        result = mDevice->CreateTexture2D(&resolveDesc, NULL, &srcTex);
-        if (FAILED(result))
-        {
-            ERR("Failed to create resolve texture for readPixels, HRESULT: 0x%X.", result);
-            stagingTex->Release();
-            return;
-        }
-
-        mDeviceContext->ResolveSubresource(srcTex, 0, texture, subResource, textureDesc.Format);
-        subResource = 0;
-    }
-    else
-    {
-        srcTex = texture;
-        srcTex->AddRef();
-    }
-
-    D3D11_BOX srcBox;
-    srcBox.left = area.x;
-    srcBox.right = area.x + area.width;
-    srcBox.top = area.y;
-    srcBox.bottom = area.y + area.height;
-    srcBox.front = 0;
-    srcBox.back = 1;
-
-    mDeviceContext->CopySubresourceRegion(stagingTex, 0, 0, 0, 0, srcTex, subResource, &srcBox);
-
-    srcTex->Release();
-    srcTex = NULL;
-
-    D3D11_MAPPED_SUBRESOURCE mapping;
-    mDeviceContext->Map(stagingTex, 0, D3D11_MAP_READ, 0, &mapping);
-
-    unsigned char *source;
-    int inputPitch;
-    if (packReverseRowOrder)
-    {
-        source = static_cast<unsigned char*>(mapping.pData) + mapping.RowPitch * (area.height - 1);
-        inputPitch = -static_cast<int>(mapping.RowPitch);
-    }
-    else
-    {
-        source = static_cast<unsigned char*>(mapping.pData);
-        inputPitch = static_cast<int>(mapping.RowPitch);
-    }
-
-    unsigned int fastPixelSize = getFastPixelCopySize(textureDesc.Format, sourceFormat, format, type);
-    if (fastPixelSize != 0)
-    {
-        unsigned char *dest = static_cast<unsigned char*>(pixels);
-        for (int j = 0; j < area.height; j++)
-        {
-            memcpy(dest + j * outputPitch, source + j * inputPitch, area.width * fastPixelSize);
-        }
-    }
-    else if (textureDesc.Format == DXGI_FORMAT_B8G8R8A8_UNORM &&
-             format == GL_RGBA &&
-             type == GL_UNSIGNED_BYTE)
-    {
-        // Fast path for swapping red with blue
-        unsigned char *dest = static_cast<unsigned char*>(pixels);
-
-        for (int j = 0; j < area.height; j++)
-        {
-            for (int i = 0; i < area.width; i++)
-            {
-                unsigned int argb = *(unsigned int*)(source + 4 * i + j * inputPitch);
-                *(unsigned int*)(dest + 4 * i + j * outputPitch) =
-                    (argb & 0xFF00FF00) |       // Keep alpha and green
-                    (argb & 0x00FF0000) >> 16 | // Move red to blue
-                    (argb & 0x000000FF) << 16;  // Move blue to red
-            }
-        }
-    }
-    else
-    {
-        gl::Color pixelColor;
-        for (int j = 0; j < area.height; j++)
-        {
-            for (int i = 0; i < area.width; i++)
-            {
-                readPixelColor(source, textureDesc.Format, sourceFormat, i, j, inputPitch, &pixelColor);
-                writePixelColor(pixelColor, format, type, i, j, outputPitch, pixels);
-            }
-        }
-    }
-
-    mDeviceContext->Unmap(stagingTex, 0);
-
-    stagingTex->Release();
-    stagingTex = NULL;
-}
-
-bool Renderer11::blitRenderbufferRect(const gl::Rectangle &readRect, const gl::Rectangle &drawRect, RenderTarget *readRenderTarget, 
-                                      RenderTarget *drawRenderTarget, bool wholeBufferCopy)
-{
-    ASSERT(readRect.width == drawRect.width && readRect.height == drawRect.height);
-
-    RenderTarget11 *drawRenderTarget11 = RenderTarget11::makeRenderTarget11(drawRenderTarget);
-    if (!drawRenderTarget)
-    {
-        ERR("Failed to retrieve the draw render target from the draw framebuffer.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    ID3D11Texture2D *drawTexture = drawRenderTarget11->getTexture();
-    unsigned int drawSubresource = drawRenderTarget11->getSubresourceIndex();
-
-    RenderTarget11 *readRenderTarget11 = RenderTarget11::makeRenderTarget11(readRenderTarget);
-    if (!readRenderTarget)
-    {
-        ERR("Failed to retrieve the read render target from the read framebuffer.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    ID3D11Texture2D *readTexture = NULL;
-    unsigned int readSubresource = 0;
-    if (readRenderTarget->getSamples() > 0)
-    {
-        readTexture = resolveMultisampledTexture(readRenderTarget11->getTexture(), readRenderTarget11->getSubresourceIndex());
-        readSubresource = 0;
-    }
-    else
-    {
-        readTexture = readRenderTarget11->getTexture();
-        readTexture->AddRef();
-        readSubresource = readRenderTarget11->getSubresourceIndex();
-    }
-
-    if (!readTexture)
-    {
-        ERR("Failed to retrieve the read render target view from the read render target.");
-        return gl::error(GL_OUT_OF_MEMORY, false);
-    }
-
-    D3D11_BOX readBox;
-    readBox.left = readRect.x;
-    readBox.right = readRect.x + readRect.width;
-    readBox.top = readRect.y;
-    readBox.bottom = readRect.y + readRect.height;
-    readBox.front = 0;
-    readBox.back = 1;
-
-    // D3D11 needs depth-stencil CopySubresourceRegions to have a NULL pSrcBox
-    // We also require complete framebuffer copies for depth-stencil blit.
-    D3D11_BOX *pSrcBox = wholeBufferCopy ? NULL : &readBox;
-
-    mDeviceContext->CopySubresourceRegion(drawTexture, drawSubresource, drawRect.x, drawRect.y, 0,
-                                          readTexture, readSubresource, pSrcBox);
-
-    SafeRelease(readTexture);
-
-    return true;
-}
-
-ID3D11Texture2D *Renderer11::resolveMultisampledTexture(ID3D11Texture2D *source, unsigned int subresource)
-{
-    D3D11_TEXTURE2D_DESC textureDesc;
-    source->GetDesc(&textureDesc);
-
-    if (textureDesc.SampleDesc.Count > 1)
-    {
-        D3D11_TEXTURE2D_DESC resolveDesc;
-        resolveDesc.Width = textureDesc.Width;
-        resolveDesc.Height = textureDesc.Height;
-        resolveDesc.MipLevels = 1;
-        resolveDesc.ArraySize = 1;
-        resolveDesc.Format = textureDesc.Format;
-        resolveDesc.SampleDesc.Count = 1;
-        resolveDesc.SampleDesc.Quality = 0;
-        resolveDesc.Usage = textureDesc.Usage;
-        resolveDesc.BindFlags = textureDesc.BindFlags;
-        resolveDesc.CPUAccessFlags = 0;
-        resolveDesc.MiscFlags = 0;
-
-        ID3D11Texture2D *resolveTexture = NULL;
-        HRESULT result = mDevice->CreateTexture2D(&resolveDesc, NULL, &resolveTexture);
-        if (FAILED(result))
-        {
-            ERR("Failed to create a multisample resolve texture, HRESULT: 0x%X.", result);
-            return NULL;
-        }
-
-        mDeviceContext->ResolveSubresource(resolveTexture, 0, source, subresource, textureDesc.Format);
-        return resolveTexture;
-    }
-    else
-    {
-        source->AddRef();
-        return source;
-    }
-}
-
-bool Renderer11::getLUID(LUID *adapterLuid) const
-{
-    adapterLuid->HighPart = 0;
-    adapterLuid->LowPart = 0;
-
-    if (!mDxgiAdapter)
-    {
-        return false;
-    }
-
-    DXGI_ADAPTER_DESC adapterDesc;
-    if (FAILED(mDxgiAdapter->GetDesc(&adapterDesc)))
-    {
-        return false;
-    }
-
-    *adapterLuid = adapterDesc.AdapterLuid;
-    return true;
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
deleted file mode 100644
index 773fc26db1..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
+++ /dev/null
@@ -1,373 +0,0 @@
-//
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Renderer11.h: Defines a back-end specific class for the D3D11 renderer.
-
-#ifndef LIBGLESV2_RENDERER_RENDERER11_H_
-#define LIBGLESV2_RENDERER_RENDERER11_H_
-
-#include "common/angleutils.h"
-#include "libGLESv2/angletypes.h"
-#include "libGLESv2/mathutil.h"
-
-#include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/renderer/d3d11/RenderStateCache.h"
-#include "libGLESv2/renderer/d3d11/InputLayoutCache.h"
-#include "libGLESv2/renderer/RenderTarget.h"
-
-#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-struct IInspectable;
-namespace ABI {
-    namespace Windows {
-        namespace ApplicationModel {
-            struct ISuspendingEventArgs;
-        }
-    }
-}
-#endif
-
-namespace gl
-{
-class Renderbuffer;
-}
-
-namespace rx
-{
-
-class VertexDataManager;
-class IndexDataManager;
-class StreamingIndexBufferInterface;
-
-enum
-{
-    MAX_VERTEX_UNIFORM_VECTORS_D3D11 = 1024,
-    MAX_FRAGMENT_UNIFORM_VECTORS_D3D11 = 1024
-};
-
-class Renderer11 : public Renderer
-{
-  public:
-    Renderer11(egl::Display *display);
-    virtual ~Renderer11();
-
-    static Renderer11 *makeRenderer11(Renderer *renderer);
-
-    virtual EGLint initialize();
-    virtual bool resetDevice();
-
-    virtual int generateConfigs(ConfigDesc **configDescList);
-    virtual void deleteConfigs(ConfigDesc *configDescList);
-
-    virtual void sync(bool block);
-
-    virtual SwapChain *createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat);
-
-    virtual void setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler);
-    virtual void setTexture(gl::SamplerType type, int index, gl::Texture *texture);
-
-    virtual void setRasterizerState(const gl::RasterizerState &rasterState);
-    virtual void setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::Color &blendColor,
-                               unsigned int sampleMask);
-    virtual void setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
-                                      int stencilBackRef, bool frontFaceCCW);
-
-    virtual void setScissorRectangle(const gl::Rectangle &scissor, bool enabled);
-    virtual bool setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
-                             bool ignoreViewport);
-
-    virtual bool applyPrimitiveType(GLenum mode, GLsizei count);
-    virtual bool applyRenderTarget(gl::Framebuffer *frameBuffer);
-    virtual void applyShaders(gl::ProgramBinary *programBinary);
-    virtual void applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray *uniformArray);
-    virtual GLenum applyVertexBuffer(gl::ProgramBinary *programBinary, gl::VertexAttribute vertexAttributes[], GLint first, GLsizei count, GLsizei instances);
-    virtual GLenum applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo);
-
-    virtual void drawArrays(GLenum mode, GLsizei count, GLsizei instances);
-    virtual void drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances);
-
-    virtual void clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer);
-
-    virtual void markAllStateDirty();
-
-    // lost device
-    void notifyDeviceLost();
-    virtual bool isDeviceLost();
-    virtual bool testDeviceLost(bool notify);
-    virtual bool testDeviceResettable();
-
-    // Renderer capabilities
-    virtual DWORD getAdapterVendor() const;
-    virtual std::string getRendererDescription() const;
-    virtual GUID getAdapterIdentifier() const;
-
-    virtual bool getBGRATextureSupport() const;
-    virtual bool getDXT1TextureSupport();
-    virtual bool getDXT3TextureSupport();
-    virtual bool getDXT5TextureSupport();
-    virtual bool getEventQuerySupport();
-    virtual bool getFloat32TextureSupport(bool *filtering, bool *renderable);
-    virtual bool getFloat16TextureSupport(bool *filtering, bool *renderable);
-    virtual bool getLuminanceTextureSupport();
-    virtual bool getLuminanceAlphaTextureSupport();
-    virtual unsigned int getMaxVertexTextureImageUnits() const;
-    virtual unsigned int getMaxCombinedTextureImageUnits() const;
-    virtual unsigned int getReservedVertexUniformVectors() const;
-    virtual unsigned int getReservedFragmentUniformVectors() const;
-    virtual unsigned int getMaxVertexUniformVectors() const;
-    virtual unsigned int getMaxFragmentUniformVectors() const;
-    virtual unsigned int getMaxVaryingVectors() const;
-    virtual bool getNonPower2TextureSupport() const;
-    virtual bool getDepthTextureSupport() const;
-    virtual bool getOcclusionQuerySupport() const;
-    virtual bool getInstancingSupport() const;
-    virtual bool getTextureFilterAnisotropySupport() const;
-    virtual float getTextureMaxAnisotropy() const;
-    virtual bool getShareHandleSupport() const;
-    virtual bool getDerivativeInstructionSupport() const;
-    virtual bool getPostSubBufferSupport() const;
-
-    virtual int getMajorShaderModel() const;
-    virtual float getMaxPointSize() const;
-    virtual int getMaxViewportDimension() const;
-    virtual int getMaxTextureWidth() const;
-    virtual int getMaxTextureHeight() const;
-    virtual bool get32BitIndexSupport() const;
-    virtual int getMinSwapInterval() const;
-    virtual int getMaxSwapInterval() const;
-
-    virtual GLsizei getMaxSupportedSamples() const;
-    int getNearestSupportedSamples(DXGI_FORMAT format, unsigned int requested) const;
-
-    virtual unsigned int getMaxRenderTargets() const;
-
-    // Pixel operations
-    virtual bool copyToRenderTarget(TextureStorageInterface2D *dest, TextureStorageInterface2D *source);
-    virtual bool copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureStorageInterfaceCube *source);
-
-    virtual bool copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level);
-    virtual bool copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level);
-
-    bool copyTexture(ID3D11ShaderResourceView *source, const gl::Rectangle &sourceArea, unsigned int sourceWidth, unsigned int sourceHeight,
-                     ID3D11RenderTargetView *dest, const gl::Rectangle &destArea, unsigned int destWidth, unsigned int destHeight, GLenum destFormat);
-
-    virtual bool blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
-                          bool blitRenderTarget, bool blitDepthStencil);
-    virtual void readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type,
-                            GLsizei outputPitch, bool packReverseRowOrder, GLint packAlignment, void* pixels);
-
-    // RenderTarget creation
-    virtual RenderTarget *createRenderTarget(SwapChain *swapChain, bool depth);
-    virtual RenderTarget *createRenderTarget(int width, int height, GLenum format, GLsizei samples, bool depth);
-
-    // Shader operations
-    virtual ShaderExecutable *loadExecutable(const void *function, size_t length, rx::ShaderType type);
-    virtual ShaderExecutable *compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type, D3DWorkaroundType workaround);
-
-    // Image operations
-    virtual Image *createImage();
-    virtual void generateMipmap(Image *dest, Image *source);
-    virtual TextureStorage *createTextureStorage2D(SwapChain *swapChain);
-    virtual TextureStorage *createTextureStorage2D(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height);
-    virtual TextureStorage *createTextureStorageCube(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size);
-
-    // Buffer creation
-    virtual VertexBuffer *createVertexBuffer();
-    virtual IndexBuffer *createIndexBuffer();
-    virtual BufferStorage *createBufferStorage();
-
-    // Query and Fence creation
-    virtual QueryImpl *createQuery(GLenum type);
-    virtual FenceImpl *createFence();
-
-    // D3D11-renderer specific methods
-    ID3D11Device *getDevice() { return mDevice; }
-    ID3D11DeviceContext *getDeviceContext() { return mDeviceContext; };
-    IDXGIFactory *getDxgiFactory() { return mDxgiFactory; };
-    D3D_FEATURE_LEVEL getFeatureLevel() { return mFeatureLevel; }
-
-    bool getRenderTargetResource(gl::Renderbuffer *colorbuffer, unsigned int *subresourceIndex, ID3D11Texture2D **resource);
-    void unapplyRenderTargets();
-    void setOneTimeRenderTarget(ID3D11RenderTargetView *renderTargetView);
-
-    virtual bool getLUID(LUID *adapterLuid) const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(Renderer11);
-
-    void drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer);
-    void drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer, int instances);
-
-    void readTextureData(ID3D11Texture2D *texture, unsigned int subResource, const gl::Rectangle &area,
-                         GLenum sourceFormat, GLenum format, GLenum type, GLsizei outputPitch, bool packReverseRowOrder,
-                         GLint packAlignment, void *pixels);
-
-    void maskedClear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer);
-    rx::Range getViewportBounds() const;
-
-    bool blitRenderbufferRect(const gl::Rectangle &readRect, const gl::Rectangle &drawRect, RenderTarget *readRenderTarget, 
-                              RenderTarget *drawRenderTarget, bool wholeBufferCopy);
-    ID3D11Texture2D *resolveMultisampledTexture(ID3D11Texture2D *source, unsigned int subresource);
-
-#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-    HRESULT onSuspend(IInspectable *, ABI::Windows::ApplicationModel::ISuspendingEventArgs *);
-#endif
-
-    HMODULE mD3d11Module;
-    HMODULE mDxgiModule;
-
-    bool mDeviceLost;
-
-    void initializeDevice();
-    void releaseDeviceResources();
-    int getMinorShaderModel() const;
-    void release();
-
-    RenderStateCache mStateCache;
-
-    // Support flags
-    bool mFloat16TextureSupport;
-    bool mFloat16FilterSupport;
-    bool mFloat16RenderSupport;
-
-    bool mFloat32TextureSupport;
-    bool mFloat32FilterSupport;
-    bool mFloat32RenderSupport;
-
-    bool mDXT1TextureSupport;
-    bool mDXT3TextureSupport;
-    bool mDXT5TextureSupport;
-
-    bool mDepthTextureSupport;
-
-    // Multisample format support
-    struct MultisampleSupportInfo
-    {
-        unsigned int qualityLevels[D3D11_MAX_MULTISAMPLE_SAMPLE_COUNT];
-    };
-
-    typedef std::unordered_map<DXGI_FORMAT, MultisampleSupportInfo, std::hash<int> > MultisampleSupportMap;
-    MultisampleSupportMap mMultisampleSupportMap;
-
-    unsigned int mMaxSupportedSamples;
-
-    // current render target states
-    unsigned int mAppliedRenderTargetSerials[gl::IMPLEMENTATION_MAX_DRAW_BUFFERS];
-    unsigned int mAppliedDepthbufferSerial;
-    unsigned int mAppliedStencilbufferSerial;
-    bool mDepthStencilInitialized;
-    bool mRenderTargetDescInitialized;
-    rx::RenderTarget::Desc mRenderTargetDesc;
-    unsigned int mCurDepthSize;
-    unsigned int mCurStencilSize;
-
-    // Currently applied sampler states
-    bool mForceSetVertexSamplerStates[gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
-    gl::SamplerState mCurVertexSamplerStates[gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
-
-    bool mForceSetPixelSamplerStates[gl::MAX_TEXTURE_IMAGE_UNITS];
-    gl::SamplerState mCurPixelSamplerStates[gl::MAX_TEXTURE_IMAGE_UNITS];
-
-    // Currently applied textures
-    unsigned int mCurVertexTextureSerials[gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
-    unsigned int mCurPixelTextureSerials[gl::MAX_TEXTURE_IMAGE_UNITS];
-
-    // Currently applied blend state
-    bool mForceSetBlendState;
-    gl::BlendState mCurBlendState;
-    gl::Color mCurBlendColor;
-    unsigned int mCurSampleMask;
-
-    // Currently applied rasterizer state
-    bool mForceSetRasterState;
-    gl::RasterizerState mCurRasterState;
-
-    // Currently applied depth stencil state
-    bool mForceSetDepthStencilState;
-    gl::DepthStencilState mCurDepthStencilState;
-    int mCurStencilRef;
-    int mCurStencilBackRef;
-
-    // Currently applied scissor rectangle
-    bool mForceSetScissor;
-    bool mScissorEnabled;
-    gl::Rectangle mCurScissor;
-
-    // Currently applied viewport
-    bool mForceSetViewport;
-    gl::Rectangle mCurViewport;
-    float mCurNear;
-    float mCurFar;
-
-    // Currently applied primitive topology
-    D3D11_PRIMITIVE_TOPOLOGY mCurrentPrimitiveTopology;
-
-    unsigned int mAppliedIBSerial;
-    unsigned int mAppliedStorageIBSerial;
-    unsigned int mAppliedIBOffset;
-
-    unsigned int mAppliedProgramBinarySerial;
-    bool mIsGeometryShaderActive;
-
-    dx_VertexConstants mVertexConstants;
-    dx_VertexConstants mAppliedVertexConstants;
-    ID3D11Buffer *mDriverConstantBufferVS;
-    ID3D11Buffer *mCurrentVertexConstantBuffer;
-
-    dx_PixelConstants mPixelConstants;
-    dx_PixelConstants mAppliedPixelConstants;
-    ID3D11Buffer *mDriverConstantBufferPS;
-    ID3D11Buffer *mCurrentPixelConstantBuffer;
-
-    ID3D11Buffer *mCurrentGeometryConstantBuffer;
-
-    // Vertex, index and input layouts
-    VertexDataManager *mVertexDataManager;
-    IndexDataManager *mIndexDataManager;
-    InputLayoutCache mInputLayoutCache;
-
-    StreamingIndexBufferInterface *mLineLoopIB;
-    StreamingIndexBufferInterface *mTriangleFanIB;
-
-    // Texture copy resources
-    bool mCopyResourcesInitialized;
-    ID3D11Buffer *mCopyVB;
-    ID3D11SamplerState *mCopySampler;
-    ID3D11InputLayout *mCopyIL;
-    ID3D11VertexShader *mCopyVS;
-    ID3D11PixelShader *mCopyRGBAPS;
-    ID3D11PixelShader *mCopyRGBPS;
-    ID3D11PixelShader *mCopyLumPS;
-    ID3D11PixelShader *mCopyLumAlphaPS;
-
-    // Masked clear resources
-    bool mClearResourcesInitialized;
-    ID3D11Buffer *mClearVB;
-    ID3D11InputLayout *mClearIL;
-    ID3D11VertexShader *mClearVS;
-    ID3D11PixelShader *mClearSinglePS;
-    ID3D11PixelShader *mClearMultiplePS;
-    ID3D11RasterizerState *mClearScissorRS;
-    ID3D11RasterizerState *mClearNoScissorRS;
-
-    // Sync query
-    ID3D11Query *mSyncQuery;
-
-    ID3D11Device *mDevice;
-    D3D_FEATURE_LEVEL mFeatureLevel;
-    ID3D11DeviceContext *mDeviceContext;
-    IDXGIAdapter *mDxgiAdapter;
-    DXGI_ADAPTER_DESC mAdapterDescription;
-    char mDescription[128];
-    IDXGIFactory *mDxgiFactory;
-
-    // Cached device caps
-    bool mBGRATextureSupport;
-};
-
-}
-#endif // LIBGLESV2_RENDERER_RENDERER11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
deleted file mode 100644
index 0c981ac503..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
+++ /dev/null
@@ -1,667 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// TextureStorage11.cpp: Implements the abstract rx::TextureStorage11 class and its concrete derived
-// classes TextureStorage11_2D and TextureStorage11_Cube, which act as the interface to the D3D11 texture.
-
-#include "libGLESv2/renderer/d3d11/TextureStorage11.h"
-
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-#include "libGLESv2/renderer/d3d11/RenderTarget11.h"
-#include "libGLESv2/renderer/d3d11/SwapChain11.h"
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
-
-#include "libGLESv2/utilities.h"
-#include "libGLESv2/main.h"
-
-namespace rx
-{
-
-TextureStorage11::TextureStorage11(Renderer *renderer, UINT bindFlags)
-    : mBindFlags(bindFlags),
-      mLodOffset(0),
-      mMipLevels(0),
-      mTexture(NULL),
-      mTextureFormat(DXGI_FORMAT_UNKNOWN),
-      mShaderResourceFormat(DXGI_FORMAT_UNKNOWN),
-      mRenderTargetFormat(DXGI_FORMAT_UNKNOWN),
-      mDepthStencilFormat(DXGI_FORMAT_UNKNOWN),
-      mSRV(NULL),
-      mTextureWidth(0),
-      mTextureHeight(0)
-{
-    mRenderer = Renderer11::makeRenderer11(renderer);
-}
-
-TextureStorage11::~TextureStorage11()
-{
-}
-
-TextureStorage11 *TextureStorage11::makeTextureStorage11(TextureStorage *storage)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11*, storage));
-    return static_cast<TextureStorage11*>(storage);
-}
-
-DWORD TextureStorage11::GetTextureBindFlags(DXGI_FORMAT format, GLenum glusage, bool forceRenderable)
-{
-    UINT bindFlags = D3D11_BIND_SHADER_RESOURCE;
-    
-    if (d3d11::IsDepthStencilFormat(format))
-    {
-        bindFlags |= D3D11_BIND_DEPTH_STENCIL;
-    }
-    else if(forceRenderable || (TextureStorage11::IsTextureFormatRenderable(format) && (glusage == GL_FRAMEBUFFER_ATTACHMENT_ANGLE)))
-    {
-        bindFlags |= D3D11_BIND_RENDER_TARGET;
-    }
-    return bindFlags;
-}
-
-bool TextureStorage11::IsTextureFormatRenderable(DXGI_FORMAT format)
-{
-    switch(format)
-    {
-      case DXGI_FORMAT_R8G8B8A8_UNORM:
-      case DXGI_FORMAT_A8_UNORM:
-      case DXGI_FORMAT_R32G32B32A32_FLOAT:
-      case DXGI_FORMAT_R16G16B16A16_FLOAT:
-      case DXGI_FORMAT_B8G8R8A8_UNORM:
-      case DXGI_FORMAT_R8_UNORM:
-      case DXGI_FORMAT_R8G8_UNORM:
-      case DXGI_FORMAT_R16_FLOAT:
-      case DXGI_FORMAT_R16G16_FLOAT:
-        return true;
-      case DXGI_FORMAT_BC1_UNORM:
-      case DXGI_FORMAT_BC2_UNORM: 
-      case DXGI_FORMAT_BC3_UNORM:
-      case DXGI_FORMAT_R32G32B32_FLOAT: // not renderable on all devices
-        return false;
-      default:
-        UNREACHABLE();
-        return false;
-    }
-}
-
-UINT TextureStorage11::getBindFlags() const
-{
-    return mBindFlags;
-}
-
-ID3D11Texture2D *TextureStorage11::getBaseTexture() const
-{
-    return mTexture;
-}
-
-int TextureStorage11::getLodOffset() const
-{
-    return mLodOffset;
-}
-
-bool TextureStorage11::isRenderTarget() const
-{
-    return (mBindFlags & (D3D11_BIND_RENDER_TARGET | D3D11_BIND_DEPTH_STENCIL)) != 0;
-}
-    
-bool TextureStorage11::isManaged() const
-{
-    return false;
-}
-
-int TextureStorage11::levelCount()
-{
-    int levels = 0;
-    if (getBaseTexture())
-    {
-        levels = mMipLevels - getLodOffset();
-    }
-    return levels;
-}
-
-UINT TextureStorage11::getSubresourceIndex(int level, int faceIndex)
-{
-    UINT index = 0;
-    if (getBaseTexture())
-    {
-        index = D3D11CalcSubresource(level, faceIndex, mMipLevels);
-    }
-    return index;
-}
-
-bool TextureStorage11::updateSubresourceLevel(ID3D11Texture2D *srcTexture, unsigned int sourceSubresource,
-                                              int level, int face, GLint xoffset, GLint yoffset,
-                                              GLsizei width, GLsizei height)
-{
-    if (srcTexture)
-    {
-        // Round up the width and height to the nearest multiple of dimension alignment
-        unsigned int dimensionAlignment = d3d11::GetTextureFormatDimensionAlignment(mTextureFormat);
-        width = width + dimensionAlignment - 1 - (width - 1) % dimensionAlignment;
-        height = height + dimensionAlignment - 1 - (height - 1) % dimensionAlignment;
-
-        D3D11_BOX srcBox;
-        srcBox.left = xoffset;
-        srcBox.top = yoffset;
-        srcBox.right = xoffset + width;
-        srcBox.bottom = yoffset + height;
-        srcBox.front = 0;
-        srcBox.back = 1;
-
-        ID3D11DeviceContext *context = mRenderer->getDeviceContext();
-        
-        ASSERT(getBaseTexture());
-        context->CopySubresourceRegion(getBaseTexture(), getSubresourceIndex(level + mLodOffset, face),
-                                       xoffset, yoffset, 0, srcTexture, sourceSubresource, &srcBox);
-        return true;
-    }
-
-    return false;
-}
-
-void TextureStorage11::generateMipmapLayer(RenderTarget11 *source, RenderTarget11 *dest)
-{
-    if (source && dest)
-    {
-        ID3D11ShaderResourceView *sourceSRV = source->getShaderResourceView();
-        ID3D11RenderTargetView *destRTV = dest->getRenderTargetView();
-
-        if (sourceSRV && destRTV)
-        {
-            gl::Rectangle sourceArea;
-            sourceArea.x = 0;
-            sourceArea.y = 0;
-            sourceArea.width = source->getWidth();
-            sourceArea.height = source->getHeight();
-
-            gl::Rectangle destArea;
-            destArea.x = 0;
-            destArea.y = 0;
-            destArea.width = dest->getWidth();
-            destArea.height = dest->getHeight();
-
-            mRenderer->copyTexture(sourceSRV, sourceArea, source->getWidth(), source->getHeight(),
-                                   destRTV, destArea, dest->getWidth(), dest->getHeight(),
-                                   GL_RGBA);
-        }
-    }
-}
-
-TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, SwapChain11 *swapchain)
-    : TextureStorage11(renderer, D3D11_BIND_RENDER_TARGET | D3D11_BIND_SHADER_RESOURCE)
-{
-    mTexture = swapchain->getOffscreenTexture();
-    mSRV = swapchain->getRenderTargetShaderResource();
-
-    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-    {
-        mRenderTarget[i] = NULL;
-    }
-
-    D3D11_TEXTURE2D_DESC texDesc;
-    mTexture->GetDesc(&texDesc);
-    mMipLevels = texDesc.MipLevels;
-    mTextureFormat = texDesc.Format;
-    mTextureWidth = texDesc.Width;
-    mTextureHeight = texDesc.Height;
-
-    D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
-    mSRV->GetDesc(&srvDesc);
-    mShaderResourceFormat = srvDesc.Format;
-
-    ID3D11RenderTargetView* offscreenRTV = swapchain->getRenderTarget();
-    D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
-    offscreenRTV->GetDesc(&rtvDesc);
-    mRenderTargetFormat = rtvDesc.Format;
-    offscreenRTV->Release();
-
-    mDepthStencilFormat = DXGI_FORMAT_UNKNOWN;
-}
-
-TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height)
-    : TextureStorage11(renderer, GetTextureBindFlags(gl_d3d11::ConvertTextureFormat(internalformat, Renderer11::makeRenderer11(renderer)->getFeatureLevel()), usage, forceRenderable))
-{
-    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-    {
-        mRenderTarget[i] = NULL;
-    }
-
-    DXGI_FORMAT convertedFormat = gl_d3d11::ConvertTextureFormat(internalformat, mRenderer->getFeatureLevel());
-    if (d3d11::IsDepthStencilFormat(convertedFormat))
-    {
-        mTextureFormat = d3d11::GetDepthTextureFormat(convertedFormat);
-        mShaderResourceFormat = d3d11::GetDepthShaderResourceFormat(convertedFormat);
-        mDepthStencilFormat = convertedFormat;
-        mRenderTargetFormat = DXGI_FORMAT_UNKNOWN;
-    }
-    else
-    {
-        mTextureFormat = convertedFormat;
-        mShaderResourceFormat = convertedFormat;
-        mDepthStencilFormat = DXGI_FORMAT_UNKNOWN;
-        mRenderTargetFormat = convertedFormat;
-    }
-
-    // if the width or height is not positive this should be treated as an incomplete texture
-    // we handle that here by skipping the d3d texture creation
-    if (width > 0 && height > 0)
-    {
-        // adjust size if needed for compressed textures
-        gl::MakeValidSize(false, gl::IsCompressed(internalformat), &width, &height, &mLodOffset);
-
-        ID3D11Device *device = mRenderer->getDevice();
-
-        D3D11_TEXTURE2D_DESC desc;
-        desc.Width = width;      // Compressed texture size constraints?
-        desc.Height = height;
-        desc.MipLevels = mRenderer->getFeatureLevel() >= D3D_FEATURE_LEVEL_10_0 ? ((levels > 0) ? levels + mLodOffset : 0) : 1;
-        desc.ArraySize = 1;
-        desc.Format = mTextureFormat;
-        desc.SampleDesc.Count = 1;
-        desc.SampleDesc.Quality = 0;
-        desc.Usage = D3D11_USAGE_DEFAULT;
-        desc.BindFlags = getBindFlags();
-        desc.CPUAccessFlags = 0;
-        desc.MiscFlags = 0;
-
-        HRESULT result = device->CreateTexture2D(&desc, NULL, &mTexture);
-
-        // this can happen from windows TDR
-        if (d3d11::isDeviceLostError(result))
-        {
-            mRenderer->notifyDeviceLost();
-            gl::error(GL_OUT_OF_MEMORY);
-        }
-        else if (FAILED(result))
-        {
-            ASSERT(result == E_OUTOFMEMORY);
-            ERR("Creating image failed.");
-            gl::error(GL_OUT_OF_MEMORY);
-        }
-        else
-        {
-            mTexture->GetDesc(&desc);
-            mMipLevels = desc.MipLevels;
-            mTextureWidth = desc.Width;
-            mTextureHeight = desc.Height;
-        }
-    }
-}
-
-TextureStorage11_2D::~TextureStorage11_2D()
-{
-    if (mTexture)
-    {
-        mTexture->Release();
-        mTexture = NULL;
-    }
-
-    if (mSRV)
-    {
-        mSRV->Release();
-        mSRV = NULL;
-    }
-
-    for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-    {
-        delete mRenderTarget[i];
-        mRenderTarget[i] = NULL;
-    }
-}
-
-TextureStorage11_2D *TextureStorage11_2D::makeTextureStorage11_2D(TextureStorage *storage)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11_2D*, storage));
-    return static_cast<TextureStorage11_2D*>(storage);
-}
-
-RenderTarget *TextureStorage11_2D::getRenderTarget(int level)
-{
-    if (level >= 0 && level < static_cast<int>(mMipLevels))
-    {
-        if (!mRenderTarget[level])
-        {
-            ID3D11Device *device = mRenderer->getDevice();
-            HRESULT result;
-
-            D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
-            srvDesc.Format = mShaderResourceFormat;
-            srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D;
-            srvDesc.Texture2D.MostDetailedMip = level;
-            srvDesc.Texture2D.MipLevels = level ? 1 : -1;
-
-            ID3D11ShaderResourceView *srv;
-            result = device->CreateShaderResourceView(mTexture, &srvDesc, &srv);
-
-            if (result == E_OUTOFMEMORY)
-            {
-                return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
-            }
-            ASSERT(SUCCEEDED(result));
-
-            if (mRenderTargetFormat != DXGI_FORMAT_UNKNOWN)
-            {
-                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
-                rtvDesc.Format = mRenderTargetFormat;
-                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2D;
-                rtvDesc.Texture2D.MipSlice = level;
-
-                ID3D11RenderTargetView *rtv;
-                result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
-
-                if (result == E_OUTOFMEMORY)
-                {
-                    srv->Release();
-                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
-                }
-                ASSERT(SUCCEEDED(result));
-
-                // RenderTarget11 expects to be the owner of the resources it is given but TextureStorage11
-                // also needs to keep a reference to the texture.
-                mTexture->AddRef();
-
-                mRenderTarget[level] = new RenderTarget11(mRenderer, rtv, mTexture, srv,
-                                                          std::max(mTextureWidth >> level, 1U),
-                                                          std::max(mTextureHeight >> level, 1U));
-            }
-            else if (mDepthStencilFormat != DXGI_FORMAT_UNKNOWN)
-            {
-                D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc;
-                dsvDesc.Format = mDepthStencilFormat;
-                dsvDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D;
-                dsvDesc.Texture2D.MipSlice = level;
-                dsvDesc.Flags = 0;
-
-                ID3D11DepthStencilView *dsv;
-                result = device->CreateDepthStencilView(mTexture, &dsvDesc, &dsv);
-
-                if (result == E_OUTOFMEMORY)
-                {
-                    srv->Release();
-                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
-                }
-                ASSERT(SUCCEEDED(result));
-
-                // RenderTarget11 expects to be the owner of the resources it is given but TextureStorage11
-                // also needs to keep a reference to the texture.
-                mTexture->AddRef();
-
-                mRenderTarget[level] = new RenderTarget11(mRenderer, dsv, mTexture, srv,
-                                                          std::max(mTextureWidth >> level, 1U),
-                                                          std::max(mTextureHeight >> level, 1U));
-            }
-            else
-            {
-                UNREACHABLE();
-            }
-        }
-
-        return mRenderTarget[level];
-    }
-    else
-    {
-        return NULL;
-    }
-}
-
-ID3D11ShaderResourceView *TextureStorage11_2D::getSRV()
-{
-    if (!mSRV)
-    {
-        ID3D11Device *device = mRenderer->getDevice();
-
-        D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
-        srvDesc.Format = mShaderResourceFormat;
-        srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D;
-        srvDesc.Texture2D.MipLevels = (mMipLevels == 0 ? -1 : mMipLevels);
-        srvDesc.Texture2D.MostDetailedMip = 0;
-
-        HRESULT result = device->CreateShaderResourceView(mTexture, &srvDesc, &mSRV);
-
-        if (result == E_OUTOFMEMORY)
-        {
-            return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11ShaderResourceView*>(NULL));
-        }
-        ASSERT(SUCCEEDED(result));
-    }
-
-    return mSRV;
-}
-
-void TextureStorage11_2D::generateMipmap(int level)
-{
-    RenderTarget11 *source = RenderTarget11::makeRenderTarget11(getRenderTarget(level - 1));
-    RenderTarget11 *dest = RenderTarget11::makeRenderTarget11(getRenderTarget(level));
-
-    generateMipmapLayer(source, dest);
-}
-
-TextureStorage11_Cube::TextureStorage11_Cube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size)
-    : TextureStorage11(renderer, GetTextureBindFlags(gl_d3d11::ConvertTextureFormat(internalformat, Renderer11::makeRenderer11(renderer)->getFeatureLevel()), usage, forceRenderable))
-{
-    for (unsigned int i = 0; i < 6; i++)
-    {
-        for (unsigned int j = 0; j < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; j++)
-        {
-            mRenderTarget[i][j] = NULL;
-        }
-    }
-
-    DXGI_FORMAT convertedFormat = gl_d3d11::ConvertTextureFormat(internalformat, mRenderer->getFeatureLevel());
-    if (d3d11::IsDepthStencilFormat(convertedFormat))
-    {
-        mTextureFormat = d3d11::GetDepthTextureFormat(convertedFormat);
-        mShaderResourceFormat = d3d11::GetDepthShaderResourceFormat(convertedFormat);
-        mDepthStencilFormat = convertedFormat;
-        mRenderTargetFormat = DXGI_FORMAT_UNKNOWN;
-    }
-    else
-    {
-        mTextureFormat = convertedFormat;
-        mShaderResourceFormat = convertedFormat;
-        mDepthStencilFormat = DXGI_FORMAT_UNKNOWN;
-        mRenderTargetFormat = convertedFormat;
-    }
-
-    // if the size is not positive this should be treated as an incomplete texture
-    // we handle that here by skipping the d3d texture creation
-    if (size > 0)
-    {
-        // adjust size if needed for compressed textures
-        int height = size;
-        gl::MakeValidSize(false, gl::IsCompressed(internalformat), &size, &height, &mLodOffset);
-
-        ID3D11Device *device = mRenderer->getDevice();
-
-        D3D11_TEXTURE2D_DESC desc;
-        desc.Width = size;
-        desc.Height = size;
-        desc.MipLevels = (levels > 0) ? levels + mLodOffset : 0;
-        desc.ArraySize = 6;
-        desc.Format = mTextureFormat;
-        desc.SampleDesc.Count = 1;
-        desc.SampleDesc.Quality = 0;
-        desc.Usage = D3D11_USAGE_DEFAULT;
-        desc.BindFlags = getBindFlags();
-        desc.CPUAccessFlags = 0;
-        desc.MiscFlags = D3D11_RESOURCE_MISC_TEXTURECUBE;
-
-        HRESULT result = device->CreateTexture2D(&desc, NULL, &mTexture);
-
-        if (FAILED(result))
-        {
-            ASSERT(result == E_OUTOFMEMORY);
-            ERR("Creating image failed.");
-            gl::error(GL_OUT_OF_MEMORY);
-        }
-        else
-        {
-            mTexture->GetDesc(&desc);
-            mMipLevels = desc.MipLevels;
-            mTextureWidth = desc.Width;
-            mTextureHeight = desc.Height;
-        }
-    }
-}
-
-TextureStorage11_Cube::~TextureStorage11_Cube()
-{
-    if (mTexture)
-    {
-        mTexture->Release();
-        mTexture = NULL;
-    }
-
-    if (mSRV)
-    {
-        mSRV->Release();
-        mSRV = NULL;
-    }
-
-    for (unsigned int i = 0; i < 6; i++)
-    {
-        for (unsigned int j = 0; j < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; j++)
-        {
-            delete mRenderTarget[i][j];
-            mRenderTarget[i][j] = NULL;
-        }
-    }
-}
-
-TextureStorage11_Cube *TextureStorage11_Cube::makeTextureStorage11_Cube(TextureStorage *storage)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(TextureStorage11_Cube*, storage));
-    return static_cast<TextureStorage11_Cube*>(storage);
-}
-
-RenderTarget *TextureStorage11_Cube::getRenderTarget(GLenum faceTarget, int level)
-{
-    unsigned int faceIdx = gl::TextureCubeMap::faceIndex(faceTarget);
-    if (level >= 0 && level < static_cast<int>(mMipLevels))
-    {
-        if (!mRenderTarget[faceIdx][level])
-        {
-            ID3D11Device *device = mRenderer->getDevice();
-            HRESULT result;
-
-            D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
-            srvDesc.Format = mShaderResourceFormat;
-            srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2DARRAY; // Will be used with Texture2D sampler, not TextureCube
-            srvDesc.Texture2DArray.MostDetailedMip = level;
-            srvDesc.Texture2DArray.MipLevels = 1;
-            srvDesc.Texture2DArray.FirstArraySlice = faceIdx;
-            srvDesc.Texture2DArray.ArraySize = 1;
-
-            ID3D11ShaderResourceView *srv;
-            result = device->CreateShaderResourceView(mTexture, &srvDesc, &srv);
-
-            if (result == E_OUTOFMEMORY)
-            {
-                return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
-            }
-            ASSERT(SUCCEEDED(result));
-
-            if (mRenderTargetFormat != DXGI_FORMAT_UNKNOWN)
-            {
-                D3D11_RENDER_TARGET_VIEW_DESC rtvDesc;
-                rtvDesc.Format = mRenderTargetFormat;
-                rtvDesc.ViewDimension = D3D11_RTV_DIMENSION_TEXTURE2DARRAY;
-                rtvDesc.Texture2DArray.MipSlice = level;
-                rtvDesc.Texture2DArray.FirstArraySlice = faceIdx;
-                rtvDesc.Texture2DArray.ArraySize = 1;
-
-                ID3D11RenderTargetView *rtv;
-                result = device->CreateRenderTargetView(mTexture, &rtvDesc, &rtv);
-
-                if (result == E_OUTOFMEMORY)
-                {
-                    srv->Release();
-                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
-                }
-                ASSERT(SUCCEEDED(result));
-
-                // RenderTarget11 expects to be the owner of the resources it is given but TextureStorage11
-                // also needs to keep a reference to the texture.
-                mTexture->AddRef();
-
-                mRenderTarget[faceIdx][level] = new RenderTarget11(mRenderer, rtv, mTexture, srv,
-                                                                   std::max(mTextureWidth >> level, 1U),
-                                                                   std::max(mTextureHeight >> level, 1U));
-            }
-            else if (mDepthStencilFormat != DXGI_FORMAT_UNKNOWN)
-            {
-                D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc;
-                dsvDesc.Format = mRenderTargetFormat;
-                dsvDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2DARRAY;
-                dsvDesc.Texture2DArray.MipSlice = level;
-                dsvDesc.Texture2DArray.FirstArraySlice = faceIdx;
-                dsvDesc.Texture2DArray.ArraySize = 1;
-
-                ID3D11DepthStencilView *dsv;
-                result = device->CreateDepthStencilView(mTexture, &dsvDesc, &dsv);
-
-                if (result == E_OUTOFMEMORY)
-                {
-                    srv->Release();
-                    return gl::error(GL_OUT_OF_MEMORY, static_cast<RenderTarget*>(NULL));
-                }
-                ASSERT(SUCCEEDED(result));
-
-                // RenderTarget11 expects to be the owner of the resources it is given but TextureStorage11
-                // also needs to keep a reference to the texture.
-                mTexture->AddRef();
-
-                mRenderTarget[faceIdx][level] = new RenderTarget11(mRenderer, dsv, mTexture, srv,
-                                                                   std::max(mTextureWidth >> level, 1U),
-                                                                   std::max(mTextureHeight >> level, 1U));
-            }
-            else
-            {
-                UNREACHABLE();
-            }
-        }
-
-        return mRenderTarget[faceIdx][level];
-    }
-    else
-    {
-        return NULL;
-    }
-}
-
-ID3D11ShaderResourceView *TextureStorage11_Cube::getSRV()
-{
-    if (!mSRV)
-    {
-        ID3D11Device *device = mRenderer->getDevice();
-
-        D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc;
-        srvDesc.Format = mShaderResourceFormat;
-        srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURECUBE;
-        srvDesc.TextureCube.MipLevels = (mMipLevels == 0 ? -1 : mMipLevels);
-        srvDesc.TextureCube.MostDetailedMip = 0;
-
-        HRESULT result = device->CreateShaderResourceView(mTexture, &srvDesc, &mSRV);
-
-        if (result == E_OUTOFMEMORY)
-        {
-            return gl::error(GL_OUT_OF_MEMORY, static_cast<ID3D11ShaderResourceView*>(NULL));
-        }
-        ASSERT(SUCCEEDED(result));
-    }
-
-    return mSRV;
-}
-
-void TextureStorage11_Cube::generateMipmap(int face, int level)
-{
-    RenderTarget11 *source = RenderTarget11::makeRenderTarget11(getRenderTarget(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level - 1));
-    RenderTarget11 *dest = RenderTarget11::makeRenderTarget11(getRenderTarget(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, level));
-
-    generateMipmapLayer(source, dest);
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.h
deleted file mode 100644
index 3c5ded05b8..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.h
+++ /dev/null
@@ -1,120 +0,0 @@
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// TextureStorage11.h: Defines the abstract rx::TextureStorage11 class and its concrete derived
-// classes TextureStorage11_2D and TextureStorage11_Cube, which act as the interface to the D3D11 texture.
-
-#ifndef LIBGLESV2_RENDERER_TEXTURESTORAGE11_H_
-#define LIBGLESV2_RENDERER_TEXTURESTORAGE11_H_
-
-#include "libGLESv2/Texture.h"
-#include "libGLESv2/renderer/TextureStorage.h"
-
-namespace rx
-{
-class RenderTarget;
-class RenderTarget11;
-class Renderer;
-class Renderer11;
-class SwapChain11;
-
-class TextureStorage11 : public TextureStorage
-{
-  public:
-    TextureStorage11(Renderer *renderer, UINT bindFlags);
-    virtual ~TextureStorage11();
-
-    static TextureStorage11 *makeTextureStorage11(TextureStorage *storage);
-
-    static DWORD GetTextureBindFlags(DXGI_FORMAT d3dfmt, GLenum glusage, bool forceRenderable);
-    static bool IsTextureFormatRenderable(DXGI_FORMAT format);
-
-    UINT getBindFlags() const;
-
-    virtual ID3D11Texture2D *getBaseTexture() const;
-    virtual ID3D11ShaderResourceView *getSRV() = 0;
-    virtual RenderTarget *getRenderTarget() { return getRenderTarget(0); }
-    virtual RenderTarget *getRenderTarget(int level) { return NULL; }
-    virtual RenderTarget *getRenderTarget(GLenum faceTarget) { return getRenderTarget(faceTarget, 0); }
-    virtual RenderTarget *getRenderTarget(GLenum faceTarget, int level) { return NULL; }
-
-    virtual void generateMipmap(int level) {};
-    virtual void generateMipmap(int face, int level) {};
-
-    virtual int getLodOffset() const;
-    virtual bool isRenderTarget() const;
-    virtual bool isManaged() const;
-    virtual int levelCount();
-    UINT getSubresourceIndex(int level, int faceTarget);
-
-    bool updateSubresourceLevel(ID3D11Texture2D *texture, unsigned int sourceSubresource, int level,
-                                int faceTarget, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-
-  protected:
-    void generateMipmapLayer(RenderTarget11 *source, RenderTarget11 *dest);
-
-    Renderer11 *mRenderer;
-    int mLodOffset;
-    unsigned int mMipLevels;
-
-    ID3D11Texture2D *mTexture;
-    DXGI_FORMAT mTextureFormat;
-    DXGI_FORMAT mShaderResourceFormat;
-    DXGI_FORMAT mRenderTargetFormat;
-    DXGI_FORMAT mDepthStencilFormat;
-    unsigned int mTextureWidth;
-    unsigned int mTextureHeight;
-
-    ID3D11ShaderResourceView *mSRV;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorage11);
-
-    const UINT mBindFlags;
-};
-
-class TextureStorage11_2D : public TextureStorage11
-{
-  public:
-    TextureStorage11_2D(Renderer *renderer, SwapChain11 *swapchain);
-    TextureStorage11_2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height);
-    virtual ~TextureStorage11_2D();
-
-    static TextureStorage11_2D *makeTextureStorage11_2D(TextureStorage *storage);
-
-    virtual ID3D11ShaderResourceView *getSRV();
-    virtual RenderTarget *getRenderTarget(int level);
-
-    virtual void generateMipmap(int level);
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorage11_2D);
-
-    RenderTarget11 *mRenderTarget[gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
-};
-
-class TextureStorage11_Cube : public TextureStorage11
-{
-  public:
-    TextureStorage11_Cube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size);
-    virtual ~TextureStorage11_Cube();
-
-    static TextureStorage11_Cube *makeTextureStorage11_Cube(TextureStorage *storage);
-
-    virtual ID3D11ShaderResourceView *getSRV();
-    virtual RenderTarget *getRenderTarget(GLenum faceTarget, int level);
-
-    virtual void generateMipmap(int face, int level);
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(TextureStorage11_Cube);
-
-    RenderTarget11 *mRenderTarget[6][gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS];
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_TEXTURESTORAGE11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/VertexBuffer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/VertexBuffer11.cpp
deleted file mode 100644
index 6f9b4181f1..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/VertexBuffer11.cpp
+++ /dev/null
@@ -1,440 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexBuffer11.cpp: Defines the D3D11 VertexBuffer implementation.
-
-#include "libGLESv2/renderer/d3d11/VertexBuffer11.h"
-#include "libGLESv2/renderer/BufferStorage.h"
-
-#include "libGLESv2/Buffer.h"
-#include "libGLESv2/renderer/d3d11/Renderer11.h"
-#include "libGLESv2/Context.h"
-
-namespace rx
-{
-
-VertexBuffer11::VertexBuffer11(rx::Renderer11 *const renderer) : mRenderer(renderer)
-{
-    mBuffer = NULL;
-    mBufferSize = 0;
-    mDynamicUsage = false;
-}
-
-VertexBuffer11::~VertexBuffer11()
-{
-    if (mBuffer)
-    {
-        mBuffer->Release();
-        mBuffer = NULL;
-    }
-}
-
-bool VertexBuffer11::initialize(unsigned int size, bool dynamicUsage)
-{
-    if (mBuffer)
-    {
-        mBuffer->Release();
-        mBuffer = NULL;
-    }
-
-    updateSerial();
-
-    if (size > 0)
-    {
-        ID3D11Device* dxDevice = mRenderer->getDevice();
-
-        D3D11_BUFFER_DESC bufferDesc;
-        bufferDesc.ByteWidth = size;
-        bufferDesc.Usage = D3D11_USAGE_DYNAMIC;
-        bufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
-        bufferDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
-        bufferDesc.MiscFlags = 0;
-        bufferDesc.StructureByteStride = 0;
-
-        HRESULT result = dxDevice->CreateBuffer(&bufferDesc, NULL, &mBuffer);
-        if (FAILED(result))
-        {
-            return false;
-        }
-    }
-
-    mBufferSize = size;
-    mDynamicUsage = dynamicUsage;
-    return true;
-}
-
-VertexBuffer11 *VertexBuffer11::makeVertexBuffer11(VertexBuffer *vetexBuffer)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(VertexBuffer11*, vetexBuffer));
-    return static_cast<VertexBuffer11*>(vetexBuffer);
-}
-
-bool VertexBuffer11::storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count,
-                                           GLsizei instances, unsigned int offset)
-{
-    if (mBuffer)
-    {
-        gl::Buffer *buffer = attrib.mBoundBuffer.get();
-
-        int inputStride = attrib.stride();
-        const VertexConverter &converter = getVertexConversion(attrib);
-
-        ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
-
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_NO_OVERWRITE, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            ERR("Vertex buffer map failed with error 0x%08x", result);
-            return false;
-        }
-
-        char* output = reinterpret_cast<char*>(mappedResource.pData) + offset;
-
-        const char *input = NULL;
-        if (buffer)
-        {
-            BufferStorage *storage = buffer->getStorage();
-            input = static_cast<const char*>(storage->getData()) + static_cast<int>(attrib.mOffset);
-        }
-        else
-        {
-            input = static_cast<const char*>(attrib.mPointer);
-        }
-
-        if (instances == 0 || attrib.mDivisor == 0)
-        {
-            input += inputStride * start;
-        }
-
-        converter.conversionFunc(input, inputStride, count, output);
-
-        dxContext->Unmap(mBuffer, 0);
-
-        return true;
-    }
-    else
-    {
-        ERR("Vertex buffer not initialized.");
-        return false;
-    }
-}
-
-bool VertexBuffer11::storeRawData(const void* data, unsigned int size, unsigned int offset)
-{
-    if (mBuffer)
-    {
-        ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
-
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_NO_OVERWRITE, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            ERR("Vertex buffer map failed with error 0x%08x", result);
-            return false;
-        }
-
-        char* bufferData = static_cast<char*>(mappedResource.pData);
-        memcpy(bufferData + offset, data, size);
-
-        dxContext->Unmap(mBuffer, 0);
-
-        return true;
-    }
-    else
-    {
-        ERR("Vertex buffer not initialized.");
-        return false;
-    }
-}
-
-bool VertexBuffer11::getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count,
-                                      GLsizei instances, unsigned int *outSpaceRequired) const
-{
-    unsigned int elementSize = getVertexConversion(attrib).outputElementSize;
-
-    unsigned int elementCount = 0;
-    if (instances == 0 || attrib.mDivisor == 0)
-    {
-        elementCount = count;
-    }
-    else
-    {
-        if (static_cast<unsigned int>(instances) < std::numeric_limits<unsigned int>::max() - (attrib.mDivisor - 1))
-        {
-            // Round up
-            elementCount = (static_cast<unsigned int>(instances) + (attrib.mDivisor - 1)) / attrib.mDivisor;
-        }
-        else
-        {
-            elementCount = instances / attrib.mDivisor;
-        }
-    }
-
-    if (elementSize <= std::numeric_limits<unsigned int>::max() / elementCount)
-    {
-        if (outSpaceRequired)
-        {
-            *outSpaceRequired = elementSize * elementCount;
-        }
-        return true;
-    }
-    else
-    {
-        return false;
-    }
-}
-
-bool VertexBuffer11::requiresConversion(const gl::VertexAttribute &attrib) const
-{
-    return !getVertexConversion(attrib).identity;
-}
-
-unsigned int VertexBuffer11::getBufferSize() const
-{
-    return mBufferSize;
-}
-
-bool VertexBuffer11::setBufferSize(unsigned int size)
-{
-    if (size > mBufferSize)
-    {
-        return initialize(size, mDynamicUsage);
-    }
-    else
-    {
-        return true;
-    }
-}
-
-bool VertexBuffer11::discard()
-{
-    if (mBuffer)
-    {
-        ID3D11DeviceContext *dxContext = mRenderer->getDeviceContext();
-
-        D3D11_MAPPED_SUBRESOURCE mappedResource;
-        HRESULT result = dxContext->Map(mBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
-        if (FAILED(result))
-        {
-            ERR("Vertex buffer map failed with error 0x%08x", result);
-            return false;
-        }
-
-        dxContext->Unmap(mBuffer, 0);
-
-        return true;
-    }
-    else
-    {
-        ERR("Vertex buffer not initialized.");
-        return false;
-    }
-}
-
-unsigned int VertexBuffer11::getVertexSize(const gl::VertexAttribute &attrib) const
-{
-    return getVertexConversion(attrib).outputElementSize;
-}
-
-DXGI_FORMAT VertexBuffer11::getDXGIFormat(const gl::VertexAttribute &attrib) const
-{
-    return getVertexConversion(attrib).dxgiFormat;
-}
-
-ID3D11Buffer *VertexBuffer11::getBuffer() const
-{
-    return mBuffer;
-}
-
-template <typename T, unsigned int componentCount, bool widen, bool normalized>
-static void copyVertexData(const void *input, unsigned int stride, unsigned int count, void *output)
-{
-    unsigned int attribSize = sizeof(T) * componentCount;
-
-    if (attribSize == stride && !widen)
-    {
-        memcpy(output, input, count * attribSize);
-    }
-    else
-    {
-        unsigned int outputStride = widen ? 4 : componentCount;
-        T defaultVal = normalized ? std::numeric_limits<T>::max() : T(1);
-
-        for (unsigned int i = 0; i < count; i++)
-        {
-            const T *offsetInput = reinterpret_cast<const T*>(reinterpret_cast<const char*>(input) + i * stride);
-            T *offsetOutput = reinterpret_cast<T*>(output) + i * outputStride;
-
-            for (unsigned int j = 0; j < componentCount; j++)
-            {
-                offsetOutput[j] = offsetInput[j];
-            }
-
-            if (widen)
-            {
-                offsetOutput[3] = defaultVal;
-            }
-        }
-    }
-}
-
-template <unsigned int componentCount>
-static void copyFixedVertexData(const void* input, unsigned int stride, unsigned int count, void* output)
-{
-    static const float divisor = 1.0f / (1 << 16);
-
-    for (unsigned int i = 0; i < count; i++)
-    {
-        const GLfixed* offsetInput = reinterpret_cast<const GLfixed*>(reinterpret_cast<const char*>(input) + stride * i);
-        float* offsetOutput = reinterpret_cast<float*>(output) + i * componentCount;
-
-        for (unsigned int j = 0; j < componentCount; j++)
-        {
-            offsetOutput[j] = static_cast<float>(offsetInput[j]) * divisor;
-        }
-    }
-}
-
-template <typename T, unsigned int componentCount, bool normalized>
-static void copyToFloatVertexData(const void* input, unsigned int stride, unsigned int count, void* output)
-{
-    typedef std::numeric_limits<T> NL;
-
-    for (unsigned int i = 0; i < count; i++)
-    {
-        const T *offsetInput = reinterpret_cast<const T*>(reinterpret_cast<const char*>(input) + stride * i);
-        float *offsetOutput = reinterpret_cast<float*>(output) + i * componentCount;
-
-        for (unsigned int j = 0; j < componentCount; j++)
-        {
-            if (normalized)
-            {
-                if (NL::is_signed)
-                {
-                    const float divisor = 1.0f / (2 * static_cast<float>(NL::max()) + 1);
-                    offsetOutput[j] = (2 * static_cast<float>(offsetInput[j]) + 1) * divisor;
-                }
-                else
-                {
-                    offsetOutput[j] =  static_cast<float>(offsetInput[j]) / NL::max();
-                }
-            }
-            else
-            {
-                offsetOutput[j] =  static_cast<float>(offsetInput[j]);
-            }
-        }
-    }
-}
-
-const VertexBuffer11::VertexConverter VertexBuffer11::mPossibleTranslations[NUM_GL_VERTEX_ATTRIB_TYPES][2][4] =
-{
-    { // GL_BYTE
-        { // unnormalized
-            { &copyToFloatVertexData<GLbyte, 1, false>, false, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyToFloatVertexData<GLbyte, 2, false>, false, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyToFloatVertexData<GLbyte, 3, false>, false, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyToFloatVertexData<GLbyte, 4, false>, false, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-        { // normalized
-            { &copyVertexData<GLbyte, 1, false, true>, true, DXGI_FORMAT_R8_SNORM, 1 },
-            { &copyVertexData<GLbyte, 2, false, true>, true, DXGI_FORMAT_R8G8_SNORM, 2 },
-            { &copyVertexData<GLbyte, 3, true, true>, false, DXGI_FORMAT_R8G8B8A8_SNORM, 4 },
-            { &copyVertexData<GLbyte, 4, false, true>, true, DXGI_FORMAT_R8G8B8A8_SNORM, 4 },
-        },
-    },
-    { // GL_UNSIGNED_BYTE
-        { // unnormalized
-            { &copyToFloatVertexData<GLubyte, 1, false>, false, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyToFloatVertexData<GLubyte, 2, false>, false, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyToFloatVertexData<GLubyte, 3, false>, false, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyToFloatVertexData<GLubyte, 4, false>, false, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-        { // normalized
-            { &copyVertexData<GLubyte, 1, false, true>, true, DXGI_FORMAT_R8_UNORM, 1 },
-            { &copyVertexData<GLubyte, 2, false, true>, true, DXGI_FORMAT_R8G8_UNORM, 2 },
-            { &copyVertexData<GLubyte, 3, true, true>, false, DXGI_FORMAT_R8G8B8A8_UNORM, 4 },
-            { &copyVertexData<GLubyte, 4, false, true>, true, DXGI_FORMAT_R8G8B8A8_UNORM, 4 },
-        },
-    },
-    { // GL_SHORT
-        { // unnormalized
-            { &copyToFloatVertexData<GLshort, 1, false>, false, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyToFloatVertexData<GLshort, 2, false>, false, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyToFloatVertexData<GLshort, 3, false>, false, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyToFloatVertexData<GLshort, 4, false>, false, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-        { // normalized
-            { &copyVertexData<GLshort, 1, false, true>, true, DXGI_FORMAT_R16_SNORM, 2 },
-            { &copyVertexData<GLshort, 2, false, true>, true, DXGI_FORMAT_R16G16_SNORM, 4 },
-            { &copyVertexData<GLshort, 3, true, true>, false, DXGI_FORMAT_R16G16B16A16_SNORM, 8 },
-            { &copyVertexData<GLshort, 4, false, true>, true, DXGI_FORMAT_R16G16B16A16_SNORM, 8 },
-        },
-    },
-    { // GL_UNSIGNED_SHORT
-        { // unnormalized
-            { &copyToFloatVertexData<GLushort, 1, false>, false, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyToFloatVertexData<GLushort, 2, false>, false, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyToFloatVertexData<GLushort, 3, false>, false, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyToFloatVertexData<GLushort, 4, false>, false, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-        { // normalized
-            { &copyVertexData<GLushort, 1, false, true>, true, DXGI_FORMAT_R16_UNORM, 2 },
-            { &copyVertexData<GLushort, 2, false, true>, true, DXGI_FORMAT_R16G16_UNORM, 4 },
-            { &copyVertexData<GLushort, 3, true, true>, false, DXGI_FORMAT_R16G16B16A16_UNORM, 8 },
-            { &copyVertexData<GLushort, 4, false, true>, true, DXGI_FORMAT_R16G16B16A16_UNORM, 8 },
-        },
-    },
-    { // GL_FIXED
-        { // unnormalized
-            { &copyFixedVertexData<1>, false, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyFixedVertexData<2>, false, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyFixedVertexData<3>, false, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyFixedVertexData<4>, false, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-        { // normalized
-            { &copyFixedVertexData<1>, false, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyFixedVertexData<2>, false, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyFixedVertexData<3>, false, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyFixedVertexData<4>, false, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-    },
-    { // GL_FLOAT
-        { // unnormalized
-            { &copyVertexData<GLfloat, 1, false, false>, true, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyVertexData<GLfloat, 2, false, false>, true, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyVertexData<GLfloat, 3, false, false>, true, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyVertexData<GLfloat, 4, false, false>, true, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-        { // normalized
-            { &copyVertexData<GLfloat, 1, false, false>, true, DXGI_FORMAT_R32_FLOAT, 4 },
-            { &copyVertexData<GLfloat, 2, false, false>, true, DXGI_FORMAT_R32G32_FLOAT, 8 },
-            { &copyVertexData<GLfloat, 3, false, false>, true, DXGI_FORMAT_R32G32B32_FLOAT, 12 },
-            { &copyVertexData<GLfloat, 4, false, false>, true, DXGI_FORMAT_R32G32B32A32_FLOAT, 16 },
-        },
-    },
-};
-
-const VertexBuffer11::VertexConverter &VertexBuffer11::getVertexConversion(const gl::VertexAttribute &attribute)
-{
-    unsigned int typeIndex = 0;
-    switch (attribute.mType)
-    {
-      case GL_BYTE:             typeIndex = 0; break;
-      case GL_UNSIGNED_BYTE:    typeIndex = 1; break;
-      case GL_SHORT:            typeIndex = 2; break;
-      case GL_UNSIGNED_SHORT:   typeIndex = 3; break;
-      case GL_FIXED:            typeIndex = 4; break;
-      case GL_FLOAT:            typeIndex = 5; break;
-      default:                  UNREACHABLE(); break;
-    }
-
-    return mPossibleTranslations[typeIndex][attribute.mNormalized ? 1 : 0][attribute.mSize - 1];
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/VertexBuffer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/VertexBuffer11.h
deleted file mode 100644
index eceb426e82..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/VertexBuffer11.h
+++ /dev/null
@@ -1,74 +0,0 @@
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexBuffer11.h: Defines the D3D11 VertexBuffer implementation.
-
-#ifndef LIBGLESV2_RENDERER_VERTEXBUFFER11_H_
-#define LIBGLESV2_RENDERER_VERTEXBUFFER11_H_
-
-#include "libGLESv2/renderer/VertexBuffer.h"
-
-namespace rx
-{
-class Renderer11;
-
-class VertexBuffer11 : public VertexBuffer
-{
-  public:
-    explicit VertexBuffer11(rx::Renderer11 *const renderer);
-    virtual ~VertexBuffer11();
-
-    virtual bool initialize(unsigned int size, bool dynamicUsage);
-
-    static VertexBuffer11 *makeVertexBuffer11(VertexBuffer *vetexBuffer);
-
-    virtual bool storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count, GLsizei instances,
-                                       unsigned int offset);
-    virtual bool storeRawData(const void* data, unsigned int size, unsigned int offset);
-
-    virtual bool getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances,
-                                  unsigned int *outSpaceRequired) const;
-
-    virtual bool requiresConversion(const gl::VertexAttribute &attrib) const;
-
-    virtual unsigned int getBufferSize() const;
-    virtual bool setBufferSize(unsigned int size);
-    virtual bool discard();
-
-    unsigned int getVertexSize(const gl::VertexAttribute &attrib) const;
-    DXGI_FORMAT getDXGIFormat(const gl::VertexAttribute &attrib) const;
-
-    ID3D11Buffer *getBuffer() const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(VertexBuffer11);
-
-    rx::Renderer11 *const mRenderer;
-
-    ID3D11Buffer *mBuffer;
-    unsigned int mBufferSize;
-    bool mDynamicUsage;
-
-    typedef void (*VertexConversionFunction)(const void *, unsigned int, unsigned int, void *);
-    struct VertexConverter
-    {
-        VertexConversionFunction conversionFunc;
-        bool identity;
-        DXGI_FORMAT dxgiFormat;
-        unsigned int outputElementSize;
-    };
-
-    enum { NUM_GL_VERTEX_ATTRIB_TYPES = 6 };
-
-    // This table is used to generate mAttributeTypes.
-    static const VertexConverter mPossibleTranslations[NUM_GL_VERTEX_ATTRIB_TYPES][2][4]; // [GL types as enumerated by typeIndex()][normalized][size - 1]
-
-    static const VertexConverter &getVertexConversion(const gl::VertexAttribute &attribute);
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_VERTEXBUFFER11_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp
deleted file mode 100644
index 34b8259a80..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp
+++ /dev/null
@@ -1,688 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// renderer11_utils.cpp: Conversion functions and other utility routines
-// specific to the D3D11 renderer.
-
-#include "libGLESv2/renderer/d3d11/renderer11_utils.h"
-
-#include "common/debug.h"
-
-namespace gl_d3d11
-{
-
-D3D11_BLEND ConvertBlendFunc(GLenum glBlend, bool isAlpha)
-{
-    D3D11_BLEND d3dBlend = D3D11_BLEND_ZERO;
-
-    switch (glBlend)
-    {
-      case GL_ZERO:                     d3dBlend = D3D11_BLEND_ZERO;                break;
-      case GL_ONE:                      d3dBlend = D3D11_BLEND_ONE;                 break;
-      case GL_SRC_COLOR:                d3dBlend = (isAlpha ? D3D11_BLEND_SRC_ALPHA : D3D11_BLEND_SRC_COLOR);           break;
-      case GL_ONE_MINUS_SRC_COLOR:      d3dBlend = (isAlpha ? D3D11_BLEND_INV_SRC_ALPHA : D3D11_BLEND_INV_SRC_COLOR);   break;
-      case GL_DST_COLOR:                d3dBlend = (isAlpha ? D3D11_BLEND_DEST_ALPHA : D3D11_BLEND_DEST_COLOR);         break;
-      case GL_ONE_MINUS_DST_COLOR:      d3dBlend = (isAlpha ? D3D11_BLEND_INV_DEST_ALPHA : D3D11_BLEND_INV_DEST_COLOR); break;
-      case GL_SRC_ALPHA:                d3dBlend = D3D11_BLEND_SRC_ALPHA;           break;
-      case GL_ONE_MINUS_SRC_ALPHA:      d3dBlend = D3D11_BLEND_INV_SRC_ALPHA;       break;
-      case GL_DST_ALPHA:                d3dBlend = D3D11_BLEND_DEST_ALPHA;          break;
-      case GL_ONE_MINUS_DST_ALPHA:      d3dBlend = D3D11_BLEND_INV_DEST_ALPHA;      break;
-      case GL_CONSTANT_COLOR:           d3dBlend = D3D11_BLEND_BLEND_FACTOR;        break;
-      case GL_ONE_MINUS_CONSTANT_COLOR: d3dBlend = D3D11_BLEND_INV_BLEND_FACTOR;    break;
-      case GL_CONSTANT_ALPHA:           d3dBlend = D3D11_BLEND_BLEND_FACTOR;        break;
-      case GL_ONE_MINUS_CONSTANT_ALPHA: d3dBlend = D3D11_BLEND_INV_BLEND_FACTOR;    break;
-      case GL_SRC_ALPHA_SATURATE:       d3dBlend = D3D11_BLEND_SRC_ALPHA_SAT;       break;
-      default: UNREACHABLE();
-    }
-
-    return d3dBlend;
-}
-
-D3D11_BLEND_OP ConvertBlendOp(GLenum glBlendOp)
-{
-    D3D11_BLEND_OP d3dBlendOp = D3D11_BLEND_OP_ADD;
-
-    switch (glBlendOp)
-    {
-      case GL_FUNC_ADD:              d3dBlendOp = D3D11_BLEND_OP_ADD;           break;
-      case GL_FUNC_SUBTRACT:         d3dBlendOp = D3D11_BLEND_OP_SUBTRACT;      break;
-      case GL_FUNC_REVERSE_SUBTRACT: d3dBlendOp = D3D11_BLEND_OP_REV_SUBTRACT;  break;
-      default: UNREACHABLE();
-    }
-
-    return d3dBlendOp;
-}
-
-UINT8 ConvertColorMask(bool red, bool green, bool blue, bool alpha)
-{
-    UINT8 mask = 0;
-    if (red)
-    {
-        mask |= D3D11_COLOR_WRITE_ENABLE_RED;
-    }
-    if (green)
-    {
-        mask |= D3D11_COLOR_WRITE_ENABLE_GREEN;
-    }
-    if (blue)
-    {
-        mask |= D3D11_COLOR_WRITE_ENABLE_BLUE;
-    }
-    if (alpha)
-    {
-        mask |= D3D11_COLOR_WRITE_ENABLE_ALPHA;
-    }
-    return mask;
-}
-
-D3D11_CULL_MODE ConvertCullMode(bool cullEnabled, GLenum cullMode)
-{
-    D3D11_CULL_MODE cull = D3D11_CULL_NONE;
-
-    if (cullEnabled)
-    {
-        switch (cullMode)
-        {
-          case GL_FRONT:            cull = D3D11_CULL_FRONT;    break;
-          case GL_BACK:             cull = D3D11_CULL_BACK;     break;
-          case GL_FRONT_AND_BACK:   cull = D3D11_CULL_NONE;     break;
-          default: UNREACHABLE();
-        }
-    }
-    else
-    {
-        cull = D3D11_CULL_NONE;
-    }
-
-    return cull;
-}
-
-D3D11_COMPARISON_FUNC ConvertComparison(GLenum comparison)
-{
-    D3D11_COMPARISON_FUNC d3dComp = D3D11_COMPARISON_NEVER;
-    switch (comparison)
-    {
-      case GL_NEVER:    d3dComp = D3D11_COMPARISON_NEVER;           break;
-      case GL_ALWAYS:   d3dComp = D3D11_COMPARISON_ALWAYS;          break;
-      case GL_LESS:     d3dComp = D3D11_COMPARISON_LESS;            break;
-      case GL_LEQUAL:   d3dComp = D3D11_COMPARISON_LESS_EQUAL;      break;
-      case GL_EQUAL:    d3dComp = D3D11_COMPARISON_EQUAL;           break;
-      case GL_GREATER:  d3dComp = D3D11_COMPARISON_GREATER;         break;
-      case GL_GEQUAL:   d3dComp = D3D11_COMPARISON_GREATER_EQUAL;   break;
-      case GL_NOTEQUAL: d3dComp = D3D11_COMPARISON_NOT_EQUAL;       break;
-      default: UNREACHABLE();
-    }
-
-    return d3dComp;
-}
-
-D3D11_DEPTH_WRITE_MASK ConvertDepthMask(bool depthWriteEnabled)
-{
-    return depthWriteEnabled ? D3D11_DEPTH_WRITE_MASK_ALL : D3D11_DEPTH_WRITE_MASK_ZERO;
-}
-
-UINT8 ConvertStencilMask(GLuint stencilmask)
-{
-    return static_cast<UINT8>(stencilmask);
-}
-
-D3D11_STENCIL_OP ConvertStencilOp(GLenum stencilOp)
-{
-    D3D11_STENCIL_OP d3dStencilOp = D3D11_STENCIL_OP_KEEP;
-
-    switch (stencilOp)
-    {
-      case GL_ZERO:      d3dStencilOp = D3D11_STENCIL_OP_ZERO;      break;
-      case GL_KEEP:      d3dStencilOp = D3D11_STENCIL_OP_KEEP;      break;
-      case GL_REPLACE:   d3dStencilOp = D3D11_STENCIL_OP_REPLACE;   break;
-      case GL_INCR:      d3dStencilOp = D3D11_STENCIL_OP_INCR_SAT;  break;
-      case GL_DECR:      d3dStencilOp = D3D11_STENCIL_OP_DECR_SAT;  break;
-      case GL_INVERT:    d3dStencilOp = D3D11_STENCIL_OP_INVERT;    break;
-      case GL_INCR_WRAP: d3dStencilOp = D3D11_STENCIL_OP_INCR;      break;
-      case GL_DECR_WRAP: d3dStencilOp = D3D11_STENCIL_OP_DECR;      break;
-      default: UNREACHABLE();
-    }
-
-    return d3dStencilOp;
-}
-
-D3D11_FILTER ConvertFilter(GLenum minFilter, GLenum magFilter, float maxAnisotropy)
-{
-    if (maxAnisotropy > 1.0f)
-    {
-        return D3D11_ENCODE_ANISOTROPIC_FILTER(false);
-    }
-    else
-    {
-        D3D11_FILTER_TYPE dxMin = D3D11_FILTER_TYPE_POINT;
-        D3D11_FILTER_TYPE dxMip = D3D11_FILTER_TYPE_POINT;
-        switch (minFilter)
-        {
-          case GL_NEAREST:                dxMin = D3D11_FILTER_TYPE_POINT;  dxMip = D3D11_FILTER_TYPE_POINT;  break;
-          case GL_LINEAR:                 dxMin = D3D11_FILTER_TYPE_LINEAR; dxMip = D3D11_FILTER_TYPE_POINT;  break;
-          case GL_NEAREST_MIPMAP_NEAREST: dxMin = D3D11_FILTER_TYPE_POINT;  dxMip = D3D11_FILTER_TYPE_POINT;  break;
-          case GL_LINEAR_MIPMAP_NEAREST:  dxMin = D3D11_FILTER_TYPE_LINEAR; dxMip = D3D11_FILTER_TYPE_POINT;  break;
-          case GL_NEAREST_MIPMAP_LINEAR:  dxMin = D3D11_FILTER_TYPE_POINT;  dxMip = D3D11_FILTER_TYPE_LINEAR; break;
-          case GL_LINEAR_MIPMAP_LINEAR:   dxMin = D3D11_FILTER_TYPE_LINEAR; dxMip = D3D11_FILTER_TYPE_LINEAR; break;
-          default:                        UNREACHABLE();
-        }
-
-        D3D11_FILTER_TYPE dxMag = D3D11_FILTER_TYPE_POINT;
-        switch (magFilter)
-        {
-          case GL_NEAREST: dxMag = D3D11_FILTER_TYPE_POINT;  break;
-          case GL_LINEAR:  dxMag = D3D11_FILTER_TYPE_LINEAR; break;
-          default:         UNREACHABLE();
-        }
-
-        return D3D11_ENCODE_BASIC_FILTER(dxMin, dxMag, dxMip, false);
-    }
-}
-
-D3D11_TEXTURE_ADDRESS_MODE ConvertTextureWrap(GLenum wrap)
-{
-    switch (wrap)
-    {
-      case GL_REPEAT:          return D3D11_TEXTURE_ADDRESS_WRAP;
-      case GL_CLAMP_TO_EDGE:   return D3D11_TEXTURE_ADDRESS_CLAMP;
-      case GL_MIRRORED_REPEAT: return D3D11_TEXTURE_ADDRESS_MIRROR;
-      default:                 UNREACHABLE();
-    }
-
-    return D3D11_TEXTURE_ADDRESS_WRAP;
-}
-
-FLOAT ConvertMinLOD(GLenum minFilter, unsigned int lodOffset)
-{
-    return (minFilter == GL_NEAREST || minFilter == GL_LINEAR) ? static_cast<float>(lodOffset) : -FLT_MAX;
-}
-
-FLOAT ConvertMaxLOD(GLenum minFilter, unsigned int lodOffset)
-{
-    return (minFilter == GL_NEAREST || minFilter == GL_LINEAR) ? static_cast<float>(lodOffset) : FLT_MAX;
-}
-
-}
-
-namespace d3d11_gl
-{
-
-GLenum ConvertBackBufferFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_R8G8B8A8_UNORM: return GL_RGBA8_OES;
-      case DXGI_FORMAT_B8G8R8A8_UNORM: return GL_BGRA8_EXT;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_RGBA8_OES;
-}
-
-GLenum ConvertDepthStencilFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_UNKNOWN: return GL_NONE;
-      case DXGI_FORMAT_D16_UNORM: return GL_DEPTH_COMPONENT16;
-      case DXGI_FORMAT_D24_UNORM_S8_UINT: return GL_DEPTH24_STENCIL8_OES;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_DEPTH24_STENCIL8_OES;
-}
-
-GLenum ConvertRenderbufferFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_B8G8R8A8_UNORM:
-        return GL_BGRA8_EXT;
-      case DXGI_FORMAT_R8G8B8A8_UNORM:
-        return GL_RGBA8_OES;
-      case DXGI_FORMAT_D16_UNORM:
-        return GL_DEPTH_COMPONENT16;
-      case DXGI_FORMAT_D24_UNORM_S8_UINT:
-        return GL_DEPTH24_STENCIL8_OES;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_RGBA8_OES;
-}
-
-GLenum ConvertTextureInternalFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_R8G8B8A8_UNORM:
-        return GL_RGBA8_OES;
-      case DXGI_FORMAT_A8_UNORM:
-        return GL_ALPHA8_EXT;
-      case DXGI_FORMAT_BC1_UNORM:
-        return GL_COMPRESSED_RGBA_S3TC_DXT1_EXT;
-      case DXGI_FORMAT_BC2_UNORM:
-        return GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE;
-      case DXGI_FORMAT_BC3_UNORM:
-        return GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE;
-      case DXGI_FORMAT_R32G32B32A32_FLOAT:
-        return GL_RGBA32F_EXT;
-      case DXGI_FORMAT_R32G32B32_FLOAT:
-        return GL_RGB32F_EXT;
-      case DXGI_FORMAT_R16G16B16A16_FLOAT:
-        return GL_RGBA16F_EXT;
-      case DXGI_FORMAT_B8G8R8A8_UNORM:
-        return GL_BGRA8_EXT;
-      case DXGI_FORMAT_R8_UNORM:
-        return GL_R8_EXT;
-      case DXGI_FORMAT_R8G8_UNORM:
-        return GL_RG8_EXT;
-      case DXGI_FORMAT_R16_FLOAT:
-        return GL_R16F_EXT;
-      case DXGI_FORMAT_R16G16_FLOAT:
-        return GL_RG16F_EXT;
-      case DXGI_FORMAT_D16_UNORM:
-        return GL_DEPTH_COMPONENT16;
-      case DXGI_FORMAT_D24_UNORM_S8_UINT:
-        return GL_DEPTH24_STENCIL8_OES;
-      case DXGI_FORMAT_UNKNOWN:
-        return GL_NONE;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_RGBA8_OES;
-}
-
-}
-
-namespace gl_d3d11
-{
-
-DXGI_FORMAT ConvertRenderbufferFormat(GLenum format)
-{
-    switch (format)
-    {
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGBA8_OES:
-      case GL_RGB565:
-      case GL_RGB8_OES:
-        return DXGI_FORMAT_R8G8B8A8_UNORM;
-      case GL_BGRA8_EXT:
-        return DXGI_FORMAT_B8G8R8A8_UNORM;
-      case GL_DEPTH_COMPONENT16:
-        return DXGI_FORMAT_D16_UNORM;
-      case GL_STENCIL_INDEX8:
-      case GL_DEPTH24_STENCIL8_OES:
-        return DXGI_FORMAT_D24_UNORM_S8_UINT;
-      default:
-        UNREACHABLE();
-    }
-
-    return DXGI_FORMAT_R8G8B8A8_UNORM;
-}
-
-DXGI_FORMAT ConvertTextureFormat(GLenum internalformat, D3D_FEATURE_LEVEL featureLevel)
-{
-    switch (internalformat)
-    {
-      case GL_RGB565:
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGB8_OES:
-      case GL_RGBA8_OES:
-      case GL_LUMINANCE8_EXT:
-      case GL_LUMINANCE8_ALPHA8_EXT:
-        return DXGI_FORMAT_R8G8B8A8_UNORM;
-      case GL_ALPHA8_EXT:
-        return featureLevel >= D3D_FEATURE_LEVEL_10_0 ? DXGI_FORMAT_A8_UNORM : DXGI_FORMAT_B8G8R8A8_UNORM;
-      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-        return DXGI_FORMAT_BC1_UNORM;
-      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-        return DXGI_FORMAT_BC2_UNORM;
-      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-        return DXGI_FORMAT_BC3_UNORM;
-      case GL_RGBA32F_EXT:
-      case GL_ALPHA32F_EXT:
-      case GL_LUMINANCE_ALPHA32F_EXT:
-        return DXGI_FORMAT_R32G32B32A32_FLOAT;
-      case GL_RGB32F_EXT:
-      case GL_LUMINANCE32F_EXT:
-        return DXGI_FORMAT_R32G32B32A32_FLOAT;
-      case GL_RGBA16F_EXT:
-      case GL_ALPHA16F_EXT:
-      case GL_LUMINANCE_ALPHA16F_EXT:
-      case GL_RGB16F_EXT:
-      case GL_LUMINANCE16F_EXT:
-        return DXGI_FORMAT_R16G16B16A16_FLOAT;
-      case GL_BGRA8_EXT:
-        return DXGI_FORMAT_B8G8R8A8_UNORM;
-      case GL_R8_EXT:
-        return DXGI_FORMAT_R8_UNORM;
-      case GL_RG8_EXT:
-        return DXGI_FORMAT_R8G8_UNORM;
-      case GL_R16F_EXT:
-        return DXGI_FORMAT_R16_FLOAT;
-      case GL_RG16F_EXT:
-        return DXGI_FORMAT_R16G16_FLOAT;
-      case GL_DEPTH_COMPONENT16:
-        return DXGI_FORMAT_D16_UNORM;
-      case GL_DEPTH_COMPONENT32_OES:
-      case GL_DEPTH24_STENCIL8_OES:
-        return DXGI_FORMAT_D24_UNORM_S8_UINT;
-      case GL_NONE:
-        return DXGI_FORMAT_UNKNOWN;
-      default:
-        UNREACHABLE();
-    }
-
-    return DXGI_FORMAT_R8G8B8A8_UNORM;
-}
-
-}
-
-namespace d3d11
-{
-
-void SetPositionTexCoordVertex(PositionTexCoordVertex* vertex, float x, float y, float u, float v)
-{
-    vertex->x = x;
-    vertex->y = y;
-    vertex->u = u;
-    vertex->v = v;
-}
-
-void SetPositionDepthColorVertex(PositionDepthColorVertex* vertex, float x, float y, float z,
-                                 const gl::Color &color)
-{
-    vertex->x = x;
-    vertex->y = y;
-    vertex->z = z;
-    vertex->r = color.red;
-    vertex->g = color.green;
-    vertex->b = color.blue;
-    vertex->a = color.alpha;
-}
-
-size_t ComputePixelSizeBits(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_R1_UNORM:
-        return 1;
-
-      case DXGI_FORMAT_A8_UNORM:
-      case DXGI_FORMAT_R8_SINT:
-      case DXGI_FORMAT_R8_SNORM:
-      case DXGI_FORMAT_R8_TYPELESS:
-      case DXGI_FORMAT_R8_UINT:
-      case DXGI_FORMAT_R8_UNORM:
-        return 8;
-
-      case DXGI_FORMAT_B5G5R5A1_UNORM:
-      case DXGI_FORMAT_B5G6R5_UNORM:
-      case DXGI_FORMAT_D16_UNORM:
-      case DXGI_FORMAT_R16_FLOAT:
-      case DXGI_FORMAT_R16_SINT:
-      case DXGI_FORMAT_R16_SNORM:
-      case DXGI_FORMAT_R16_TYPELESS:
-      case DXGI_FORMAT_R16_UINT:
-      case DXGI_FORMAT_R16_UNORM:
-      case DXGI_FORMAT_R8G8_SINT:
-      case DXGI_FORMAT_R8G8_SNORM:
-      case DXGI_FORMAT_R8G8_TYPELESS:
-      case DXGI_FORMAT_R8G8_UINT:
-      case DXGI_FORMAT_R8G8_UNORM:
-        return 16;
-
-      case DXGI_FORMAT_B8G8R8X8_TYPELESS:
-      case DXGI_FORMAT_B8G8R8X8_UNORM:
-      case DXGI_FORMAT_B8G8R8X8_UNORM_SRGB:
-      case DXGI_FORMAT_D24_UNORM_S8_UINT:
-      case DXGI_FORMAT_D32_FLOAT:
-      case DXGI_FORMAT_D32_FLOAT_S8X24_UINT:
-      case DXGI_FORMAT_G8R8_G8B8_UNORM:
-      case DXGI_FORMAT_R10G10B10_XR_BIAS_A2_UNORM:
-      case DXGI_FORMAT_R10G10B10A2_TYPELESS:
-      case DXGI_FORMAT_R10G10B10A2_UINT:
-      case DXGI_FORMAT_R10G10B10A2_UNORM:
-      case DXGI_FORMAT_R11G11B10_FLOAT:
-      case DXGI_FORMAT_R16G16_FLOAT:
-      case DXGI_FORMAT_R16G16_SINT:
-      case DXGI_FORMAT_R16G16_SNORM:
-      case DXGI_FORMAT_R16G16_TYPELESS:
-      case DXGI_FORMAT_R16G16_UINT:
-      case DXGI_FORMAT_R16G16_UNORM:
-      case DXGI_FORMAT_R24_UNORM_X8_TYPELESS:
-      case DXGI_FORMAT_R24G8_TYPELESS:
-      case DXGI_FORMAT_R32_FLOAT:
-      case DXGI_FORMAT_R32_FLOAT_X8X24_TYPELESS:
-      case DXGI_FORMAT_R32_SINT:
-      case DXGI_FORMAT_R32_TYPELESS:
-      case DXGI_FORMAT_R32_UINT:
-      case DXGI_FORMAT_R8G8_B8G8_UNORM:
-      case DXGI_FORMAT_R8G8B8A8_SINT:
-      case DXGI_FORMAT_R8G8B8A8_SNORM:
-      case DXGI_FORMAT_R8G8B8A8_TYPELESS:
-      case DXGI_FORMAT_R8G8B8A8_UINT:
-      case DXGI_FORMAT_R8G8B8A8_UNORM:
-      case DXGI_FORMAT_R8G8B8A8_UNORM_SRGB:
-      case DXGI_FORMAT_B8G8R8A8_TYPELESS:
-      case DXGI_FORMAT_B8G8R8A8_UNORM:
-      case DXGI_FORMAT_B8G8R8A8_UNORM_SRGB:
-      case DXGI_FORMAT_R9G9B9E5_SHAREDEXP:
-      case DXGI_FORMAT_X24_TYPELESS_G8_UINT:
-      case DXGI_FORMAT_X32_TYPELESS_G8X24_UINT:
-        return 32;
-
-      case DXGI_FORMAT_R16G16B16A16_FLOAT:
-      case DXGI_FORMAT_R16G16B16A16_SINT:
-      case DXGI_FORMAT_R16G16B16A16_SNORM:
-      case DXGI_FORMAT_R16G16B16A16_TYPELESS:
-      case DXGI_FORMAT_R16G16B16A16_UINT:
-      case DXGI_FORMAT_R16G16B16A16_UNORM:
-      case DXGI_FORMAT_R32G32_FLOAT:
-      case DXGI_FORMAT_R32G32_SINT:
-      case DXGI_FORMAT_R32G32_TYPELESS:
-      case DXGI_FORMAT_R32G32_UINT:
-      case DXGI_FORMAT_R32G8X24_TYPELESS:
-        return 64;
-
-      case DXGI_FORMAT_R32G32B32_FLOAT:
-      case DXGI_FORMAT_R32G32B32_SINT:
-      case DXGI_FORMAT_R32G32B32_TYPELESS:
-      case DXGI_FORMAT_R32G32B32_UINT:
-        return 96;
-
-      case DXGI_FORMAT_R32G32B32A32_FLOAT:
-      case DXGI_FORMAT_R32G32B32A32_SINT:
-      case DXGI_FORMAT_R32G32B32A32_TYPELESS:
-      case DXGI_FORMAT_R32G32B32A32_UINT:
-        return 128;
-
-      case DXGI_FORMAT_BC1_TYPELESS:
-      case DXGI_FORMAT_BC1_UNORM:
-      case DXGI_FORMAT_BC1_UNORM_SRGB:
-      case DXGI_FORMAT_BC4_SNORM:
-      case DXGI_FORMAT_BC4_TYPELESS:
-      case DXGI_FORMAT_BC4_UNORM:
-        return 4;
-
-      case DXGI_FORMAT_BC2_TYPELESS:
-      case DXGI_FORMAT_BC2_UNORM:
-      case DXGI_FORMAT_BC2_UNORM_SRGB:
-      case DXGI_FORMAT_BC3_TYPELESS:
-      case DXGI_FORMAT_BC3_UNORM:
-      case DXGI_FORMAT_BC3_UNORM_SRGB:
-      case DXGI_FORMAT_BC5_SNORM:
-      case DXGI_FORMAT_BC5_TYPELESS:
-      case DXGI_FORMAT_BC5_UNORM:
-      case DXGI_FORMAT_BC6H_SF16:
-      case DXGI_FORMAT_BC6H_TYPELESS:
-      case DXGI_FORMAT_BC6H_UF16:
-      case DXGI_FORMAT_BC7_TYPELESS:
-      case DXGI_FORMAT_BC7_UNORM:
-      case DXGI_FORMAT_BC7_UNORM_SRGB:
-        return 8;
-
-      default:
-        return 0;
-    }
-}
-
-size_t ComputeBlockSizeBits(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_BC1_TYPELESS:
-      case DXGI_FORMAT_BC1_UNORM:
-      case DXGI_FORMAT_BC1_UNORM_SRGB:
-      case DXGI_FORMAT_BC4_SNORM:
-      case DXGI_FORMAT_BC4_TYPELESS:
-      case DXGI_FORMAT_BC4_UNORM:
-      case DXGI_FORMAT_BC2_TYPELESS:
-      case DXGI_FORMAT_BC2_UNORM:
-      case DXGI_FORMAT_BC2_UNORM_SRGB:
-      case DXGI_FORMAT_BC3_TYPELESS:
-      case DXGI_FORMAT_BC3_UNORM:
-      case DXGI_FORMAT_BC3_UNORM_SRGB:
-      case DXGI_FORMAT_BC5_SNORM:
-      case DXGI_FORMAT_BC5_TYPELESS:
-      case DXGI_FORMAT_BC5_UNORM:
-      case DXGI_FORMAT_BC6H_SF16:
-      case DXGI_FORMAT_BC6H_TYPELESS:
-      case DXGI_FORMAT_BC6H_UF16:
-      case DXGI_FORMAT_BC7_TYPELESS:
-      case DXGI_FORMAT_BC7_UNORM:
-      case DXGI_FORMAT_BC7_UNORM_SRGB:
-        return ComputePixelSizeBits(format) * 16;
-      default:
-        UNREACHABLE();
-        return 0;
-    }
-}
-
-bool IsCompressed(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_BC1_TYPELESS:
-      case DXGI_FORMAT_BC1_UNORM:
-      case DXGI_FORMAT_BC1_UNORM_SRGB:
-      case DXGI_FORMAT_BC4_SNORM:
-      case DXGI_FORMAT_BC4_TYPELESS:
-      case DXGI_FORMAT_BC4_UNORM:
-      case DXGI_FORMAT_BC2_TYPELESS:
-      case DXGI_FORMAT_BC2_UNORM:
-      case DXGI_FORMAT_BC2_UNORM_SRGB:
-      case DXGI_FORMAT_BC3_TYPELESS:
-      case DXGI_FORMAT_BC3_UNORM:
-      case DXGI_FORMAT_BC3_UNORM_SRGB:
-      case DXGI_FORMAT_BC5_SNORM:
-      case DXGI_FORMAT_BC5_TYPELESS:
-      case DXGI_FORMAT_BC5_UNORM:
-      case DXGI_FORMAT_BC6H_SF16:
-      case DXGI_FORMAT_BC6H_TYPELESS:
-      case DXGI_FORMAT_BC6H_UF16:
-      case DXGI_FORMAT_BC7_TYPELESS:
-      case DXGI_FORMAT_BC7_UNORM:
-      case DXGI_FORMAT_BC7_UNORM_SRGB:
-        return true;
-      case DXGI_FORMAT_UNKNOWN:
-        UNREACHABLE();
-        return false;
-      default:
-        return false;
-    }
-}
-
-unsigned int GetTextureFormatDimensionAlignment(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_BC1_TYPELESS:
-      case DXGI_FORMAT_BC1_UNORM:
-      case DXGI_FORMAT_BC1_UNORM_SRGB:
-      case DXGI_FORMAT_BC4_SNORM:
-      case DXGI_FORMAT_BC4_TYPELESS:
-      case DXGI_FORMAT_BC4_UNORM:
-      case DXGI_FORMAT_BC2_TYPELESS:
-      case DXGI_FORMAT_BC2_UNORM:
-      case DXGI_FORMAT_BC2_UNORM_SRGB:
-      case DXGI_FORMAT_BC3_TYPELESS:
-      case DXGI_FORMAT_BC3_UNORM:
-      case DXGI_FORMAT_BC3_UNORM_SRGB:
-      case DXGI_FORMAT_BC5_SNORM:
-      case DXGI_FORMAT_BC5_TYPELESS:
-      case DXGI_FORMAT_BC5_UNORM:
-      case DXGI_FORMAT_BC6H_SF16:
-      case DXGI_FORMAT_BC6H_TYPELESS:
-      case DXGI_FORMAT_BC6H_UF16:
-      case DXGI_FORMAT_BC7_TYPELESS:
-      case DXGI_FORMAT_BC7_UNORM:
-      case DXGI_FORMAT_BC7_UNORM_SRGB:
-        return 4;
-      case DXGI_FORMAT_UNKNOWN:
-        UNREACHABLE();
-        return 1;
-      default:
-        return 1;
-    }
-}
-
-bool IsDepthStencilFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_D32_FLOAT_S8X24_UINT:
-      case DXGI_FORMAT_D32_FLOAT:
-      case DXGI_FORMAT_D24_UNORM_S8_UINT:
-      case DXGI_FORMAT_D16_UNORM:
-        return true;
-      default:
-        return false;
-    }
-}
-
-DXGI_FORMAT GetDepthTextureFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_D32_FLOAT_S8X24_UINT: return DXGI_FORMAT_R32G8X24_TYPELESS;
-      case DXGI_FORMAT_D32_FLOAT:            return DXGI_FORMAT_R32_TYPELESS;
-      case DXGI_FORMAT_D24_UNORM_S8_UINT:    return DXGI_FORMAT_R24G8_TYPELESS;
-      case DXGI_FORMAT_D16_UNORM:            return DXGI_FORMAT_R16_TYPELESS;
-      default: UNREACHABLE();                return DXGI_FORMAT_UNKNOWN;
-    }
-}
-
-DXGI_FORMAT GetDepthShaderResourceFormat(DXGI_FORMAT format)
-{
-    switch (format)
-    {
-      case DXGI_FORMAT_D32_FLOAT_S8X24_UINT: return DXGI_FORMAT_R32_FLOAT_X8X24_TYPELESS;
-      case DXGI_FORMAT_D32_FLOAT:            return DXGI_FORMAT_R32_UINT;
-      case DXGI_FORMAT_D24_UNORM_S8_UINT:    return DXGI_FORMAT_R24_UNORM_X8_TYPELESS;
-      case DXGI_FORMAT_D16_UNORM:            return DXGI_FORMAT_R16_UNORM;
-      default: UNREACHABLE();                return DXGI_FORMAT_UNKNOWN;
-    }
-}
-
-HRESULT SetDebugName(ID3D11DeviceChild *resource, const char *name)
-{
-#if defined(_DEBUG)
-    return resource->SetPrivateData(WKPDID_D3DDebugObjectName, strlen(name), name);
-#else
-    return S_OK;
-#endif
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h
deleted file mode 100644
index 70ad4fea2b..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h
+++ /dev/null
@@ -1,95 +0,0 @@
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// renderer11_utils.h: Conversion functions and other utility routines
-// specific to the D3D11 renderer.
-
-#ifndef LIBGLESV2_RENDERER_RENDERER11_UTILS_H
-#define LIBGLESV2_RENDERER_RENDERER11_UTILS_H
-
-#include "libGLESv2/angletypes.h"
-
-namespace gl_d3d11
-{
-
-D3D11_BLEND ConvertBlendFunc(GLenum glBlend, bool isAlpha);
-D3D11_BLEND_OP ConvertBlendOp(GLenum glBlendOp);
-UINT8 ConvertColorMask(bool maskRed, bool maskGreen, bool maskBlue, bool maskAlpha);
-
-D3D11_CULL_MODE ConvertCullMode(bool cullEnabled, GLenum cullMode);
-
-D3D11_COMPARISON_FUNC ConvertComparison(GLenum comparison);
-D3D11_DEPTH_WRITE_MASK ConvertDepthMask(bool depthWriteEnabled);
-UINT8 ConvertStencilMask(GLuint stencilmask);
-D3D11_STENCIL_OP ConvertStencilOp(GLenum stencilOp);
-
-D3D11_FILTER ConvertFilter(GLenum minFilter, GLenum magFilter, float maxAnisotropy);
-D3D11_TEXTURE_ADDRESS_MODE ConvertTextureWrap(GLenum wrap);
-FLOAT ConvertMinLOD(GLenum minFilter, unsigned int lodOffset);
-FLOAT ConvertMaxLOD(GLenum minFilter, unsigned int lodOffset);
-
-DXGI_FORMAT ConvertRenderbufferFormat(GLenum format);
-DXGI_FORMAT ConvertTextureFormat(GLenum format, D3D_FEATURE_LEVEL featureLevel);
-}
-
-namespace d3d11_gl
-{
-
-GLenum ConvertBackBufferFormat(DXGI_FORMAT format);
-GLenum ConvertDepthStencilFormat(DXGI_FORMAT format);
-GLenum ConvertRenderbufferFormat(DXGI_FORMAT format);
-GLenum ConvertTextureInternalFormat(DXGI_FORMAT format);
-
-}
-
-namespace d3d11
-{
-
-struct PositionTexCoordVertex
-{
-    float x, y;
-    float u, v;
-};
-void SetPositionTexCoordVertex(PositionTexCoordVertex* vertex, float x, float y, float u, float v);
-
-struct PositionDepthColorVertex
-{
-    float x, y, z;
-    float r, g, b, a;
-};
-void SetPositionDepthColorVertex(PositionDepthColorVertex* vertex, float x, float y, float z,
-                                 const gl::Color &color);
-
-size_t ComputePixelSizeBits(DXGI_FORMAT format);
-size_t ComputeBlockSizeBits(DXGI_FORMAT format);
-
-bool IsCompressed(DXGI_FORMAT format);
-unsigned int GetTextureFormatDimensionAlignment(DXGI_FORMAT format);
-
-bool IsDepthStencilFormat(DXGI_FORMAT format);
-DXGI_FORMAT GetDepthTextureFormat(DXGI_FORMAT format);
-DXGI_FORMAT GetDepthShaderResourceFormat(DXGI_FORMAT format);
-
-HRESULT SetDebugName(ID3D11DeviceChild *resource, const char *name);
-
-inline bool isDeviceLostError(HRESULT errorCode)
-{
-    switch (errorCode)
-    {
-      case DXGI_ERROR_DEVICE_HUNG:
-      case DXGI_ERROR_DEVICE_REMOVED:
-      case DXGI_ERROR_DEVICE_RESET:
-      case DXGI_ERROR_DRIVER_INTERNAL_ERROR:
-      case DXGI_ERROR_NOT_CURRENTLY_AVAILABLE:
-        return true;
-      default:
-        return false;
-    }
-}
-
-}
-
-#endif // LIBGLESV2_RENDERER_RENDERER11_UTILS_H
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl
deleted file mode 100644
index cb132dc99c..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl
+++ /dev/null
@@ -1,42 +0,0 @@
-void VS_Clear( in float3  inPosition :    POSITION,  in float4  inColor : COLOR,
-              out float4 outPosition : SV_POSITION, out float4 outColor : COLOR)
-{
-    outPosition = float4(inPosition, 1.0f);
-    outColor = inColor;
-}
-
-// Assume we are in SM4+, which has 8 color outputs
-struct PS_OutputMultiple
-{
-	float4 color0 : SV_TARGET0;
-	float4 color1 : SV_TARGET1;
-	float4 color2 : SV_TARGET2;
-	float4 color3 : SV_TARGET3;
-#ifdef SM4
-	float4 color4 : SV_TARGET4;
-	float4 color5 : SV_TARGET5;
-	float4 color6 : SV_TARGET6;
-	float4 color7 : SV_TARGET7;
-#endif
-};
-
-PS_OutputMultiple PS_ClearMultiple(in float4 inPosition : SV_POSITION, in float4 inColor : COLOR)
-{
-	PS_OutputMultiple outColor;
-	outColor.color0 = inColor;
-	outColor.color1 = inColor;
-	outColor.color2 = inColor;
-	outColor.color3 = inColor;
-#ifdef SM4
-	outColor.color4 = inColor;
-	outColor.color5 = inColor;
-	outColor.color6 = inColor;
-	outColor.color7 = inColor;
-#endif
-	return outColor;
-}
-
-float4 PS_ClearSingle(in float4 inPosition : SV_Position, in float4 inColor : COLOR) : SV_Target0
-{
-	return inColor;
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Passthrough11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Passthrough11.hlsl
deleted file mode 100644
index 43b7801efc..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Passthrough11.hlsl
+++ /dev/null
@@ -1,29 +0,0 @@
-Texture2D Texture : register(t0);
-SamplerState Sampler : register(s0);
-
-void VS_Passthrough( in float2  inPosition :    POSITION,  in float2  inTexCoord : TEXCOORD0,
-                    out float4 outPosition : SV_POSITION, out float2 outTexCoord : TEXCOORD0)
-{
-    outPosition = float4(inPosition, 0.0f, 1.0f);
-    outTexCoord = inTexCoord;
-}
-
-float4 PS_PassthroughRGBA(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
-{
-    return Texture.Sample(Sampler, inTexCoord).rgba;
-}
-
-float4 PS_PassthroughRGB(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
-{
-    return float4(Texture.Sample(Sampler, inTexCoord).rgb, 1.0f);
-}
-
-float4 PS_PassthroughLum(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
-{
-    return float4(Texture.Sample(Sampler, inTexCoord).rrr, 1.0f);
-}
-
-float4 PS_PassthroughLumAlpha(in float4 inPosition : SV_POSITION, in float2 inTexCoord : TEXCOORD0) : SV_TARGET0
-{
-    return Texture.Sample(Sampler, inTexCoord).rrra;
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/BufferStorage9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/BufferStorage9.cpp
deleted file mode 100644
index 9fdc1246f1..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/BufferStorage9.cpp
+++ /dev/null
@@ -1,78 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// BufferStorage9.cpp Defines the BufferStorage9 class.
-
-#include "libGLESv2/renderer/d3d9/BufferStorage9.h"
-#include "common/debug.h"
-
-namespace rx
-{
-
-BufferStorage9::BufferStorage9()
-{
-    mMemory = NULL;
-    mAllocatedSize = 0;
-    mSize = 0;
-}
-
-BufferStorage9::~BufferStorage9()
-{
-    delete[] mMemory;
-}
-
-BufferStorage9 *BufferStorage9::makeBufferStorage9(BufferStorage *bufferStorage)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(BufferStorage9*, bufferStorage));
-    return static_cast<BufferStorage9*>(bufferStorage);
-}
-
-void *BufferStorage9::getData()
-{
-    return mMemory;
-}
-
-void BufferStorage9::setData(const void* data, unsigned int size, unsigned int offset)
-{
-    if (!mMemory || offset + size > mAllocatedSize)
-    {
-        unsigned int newAllocatedSize = offset + size;
-        void *newMemory = new char[newAllocatedSize];
-
-        if (offset > 0 && mMemory && mAllocatedSize > 0)
-        {
-            memcpy(newMemory, mMemory, std::min(offset, mAllocatedSize));
-        }
-
-        delete[] mMemory;
-        mMemory = newMemory;
-        mAllocatedSize = newAllocatedSize;
-    }
-
-    mSize = std::max(mSize, offset + size);
-    if (data)
-    {
-        memcpy(reinterpret_cast<char*>(mMemory) + offset, data, size);
-    }
-}
-
-void BufferStorage9::clear()
-{
-    mSize = 0;
-}
-
-unsigned int BufferStorage9::getSize() const
-{
-    return mSize;
-}
-
-bool BufferStorage9::supportsDirectBinding() const
-{
-    return false;
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/BufferStorage9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/BufferStorage9.h
deleted file mode 100644
index 3e803969bc..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/BufferStorage9.h
+++ /dev/null
@@ -1,42 +0,0 @@
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// BufferStorage9.h Defines the BufferStorage9 class.
-
-#ifndef LIBGLESV2_RENDERER_BUFFERSTORAGE9_H_
-#define LIBGLESV2_RENDERER_BUFFERSTORAGE9_H_
-
-#include "libGLESv2/renderer/BufferStorage.h"
-
-namespace rx
-{
-
-class BufferStorage9 : public BufferStorage
-{
-  public:
-    BufferStorage9();
-    virtual ~BufferStorage9();
-
-    static BufferStorage9 *makeBufferStorage9(BufferStorage *bufferStorage);
-
-    virtual void *getData();
-    virtual void setData(const void* data, unsigned int size, unsigned int offset);
-    virtual void clear();
-    virtual unsigned int getSize() const;
-    virtual bool supportsDirectBinding() const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(BufferStorage9);
-
-    void *mMemory;
-    unsigned int mAllocatedSize;
-
-    unsigned int mSize;
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_BUFFERSTORAGE9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Fence9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Fence9.cpp
deleted file mode 100644
index 639c37b4e4..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Fence9.cpp
+++ /dev/null
@@ -1,135 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Fence9.cpp: Defines the rx::Fence9 class.
-
-#include "libGLESv2/renderer/d3d9/Fence9.h"
-#include "libGLESv2/main.h"
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-
-namespace rx
-{
-
-Fence9::Fence9(rx::Renderer9 *renderer)
-{
-    mRenderer = renderer;
-    mQuery = NULL;
-}
-
-Fence9::~Fence9()
-{
-    if (mQuery)
-    {
-        mRenderer->freeEventQuery(mQuery);
-        mQuery = NULL;
-    }
-}
-
-GLboolean Fence9::isFence()
-{
-    // GL_NV_fence spec:
-    // A name returned by GenFencesNV, but not yet set via SetFenceNV, is not the name of an existing fence.
-    return mQuery != NULL;
-}
-
-void Fence9::setFence(GLenum condition)
-{
-    if (!mQuery)
-    {
-        mQuery = mRenderer->allocateEventQuery();
-        if (!mQuery)
-        {
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    HRESULT result = mQuery->Issue(D3DISSUE_END);
-    ASSERT(SUCCEEDED(result));
-
-    setCondition(condition);
-    setStatus(GL_FALSE);
-}
-
-GLboolean Fence9::testFence()
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION, GL_TRUE);
-    }
-
-    HRESULT result = mQuery->GetData(NULL, 0, D3DGETDATA_FLUSH);
-
-    if (d3d9::isDeviceLostError(result))
-    {
-        mRenderer->notifyDeviceLost();
-        return gl::error(GL_OUT_OF_MEMORY, GL_TRUE);
-    }
-
-    ASSERT(result == S_OK || result == S_FALSE);
-    setStatus(result == S_OK);
-    return getStatus();
-}
-
-void Fence9::finishFence()
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    while (!testFence())
-    {
-        Sleep(0);
-    }
-}
-
-void Fence9::getFenceiv(GLenum pname, GLint *params)
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    switch (pname)
-    {
-        case GL_FENCE_STATUS_NV:
-        {
-            // GL_NV_fence spec:
-            // Once the status of a fence has been finished (via FinishFenceNV) or tested and the returned status is TRUE (via either TestFenceNV
-            // or GetFenceivNV querying the FENCE_STATUS_NV), the status remains TRUE until the next SetFenceNV of the fence.
-            if (getStatus())
-            {
-                params[0] = GL_TRUE;
-                return;
-            }
-            
-            HRESULT result = mQuery->GetData(NULL, 0, 0);
-
-            if (d3d9::isDeviceLostError(result))
-            {
-                params[0] = GL_TRUE;
-                mRenderer->notifyDeviceLost();
-                return gl::error(GL_OUT_OF_MEMORY);
-            }
-
-            ASSERT(result == S_OK || result == S_FALSE);
-            setStatus(result == S_OK);
-            params[0] = getStatus();
-
-            break;
-        }
-        case GL_FENCE_CONDITION_NV:
-            params[0] = getCondition();
-            break;
-        default:
-            return gl::error(GL_INVALID_ENUM);
-            break;
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.h
deleted file mode 100644
index 2fbbca3124..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.h
+++ /dev/null
@@ -1,79 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Image9.h: Defines the rx::Image9 class, which acts as the interface to
-// the actual underlying surfaces of a Texture.
-
-#ifndef LIBGLESV2_RENDERER_IMAGE9_H_
-#define LIBGLESV2_RENDERER_IMAGE9_H_
-
-#include "libGLESv2/renderer/Image.h"
-#include "common/debug.h"
-
-namespace gl
-{
-class Framebuffer;
-}
-
-namespace rx
-{
-class Renderer;
-class Renderer9;
-class TextureStorageInterface2D;
-class TextureStorageInterfaceCube;
-
-class Image9 : public Image
-{
-  public:
-    Image9();
-    ~Image9();
-
-    static Image9 *makeImage9(Image *img);
-
-    static void generateMipmap(Image9 *dest, Image9 *source);
-    static void generateMip(IDirect3DSurface9 *destSurface, IDirect3DSurface9 *sourceSurface);
-    static void copyLockableSurfaces(IDirect3DSurface9 *dest, IDirect3DSurface9 *source);
-
-    virtual bool redefine(Renderer *renderer, GLint internalformat, GLsizei width, GLsizei height, bool forceRelease);
-
-    virtual bool isRenderableFormat() const;
-    D3DFORMAT getD3DFormat() const;
-
-    virtual bool isDirty() const {return mSurface && mDirty;}
-    IDirect3DSurface9 *getSurface();
-
-    virtual void setManagedSurface(TextureStorageInterface2D *storage, int level);
-    virtual void setManagedSurface(TextureStorageInterfaceCube *storage, int face, int level);
-    virtual bool updateSurface(TextureStorageInterface2D *storage, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-    virtual bool updateSurface(TextureStorageInterfaceCube *storage, int face, int level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-
-    virtual void loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                  GLint unpackAlignment, const void *input);
-    virtual void loadCompressedData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
-                                    const void *input);
-
-    virtual void copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height, gl::Framebuffer *source);
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(Image9);
-
-    void createSurface();
-    void setManagedSurface(IDirect3DSurface9 *surface);
-    bool updateSurface(IDirect3DSurface9 *dest, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height);
-
-    HRESULT lock(D3DLOCKED_RECT *lockedRect, const RECT *rect);
-    void unlock();
-    
-    Renderer9 *mRenderer;
-
-    D3DPOOL mD3DPool;   // can only be D3DPOOL_SYSTEMMEM or D3DPOOL_MANAGED since it needs to be lockable.
-    D3DFORMAT mD3DFormat;
-
-    IDirect3DSurface9 *mSurface;
-};
-}
-
-#endif   // LIBGLESV2_RENDERER_IMAGE9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/IndexBuffer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/IndexBuffer9.cpp
deleted file mode 100644
index 7cb5d13a18..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/IndexBuffer9.cpp
+++ /dev/null
@@ -1,207 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Indexffer9.cpp: Defines the D3D9 IndexBuffer implementation.
-
-#include "libGLESv2/renderer/d3d9/IndexBuffer9.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-
-namespace rx
-{
-
-IndexBuffer9::IndexBuffer9(Renderer9 *const renderer) : mRenderer(renderer)
-{
-    mIndexBuffer = NULL;
-    mBufferSize = 0;
-    mIndexType = 0;
-    mDynamic = false;
-}
-
-IndexBuffer9::~IndexBuffer9()
-{
-    if (mIndexBuffer)
-    {
-        mIndexBuffer->Release();
-        mIndexBuffer = NULL;
-    }
-}
-
-bool IndexBuffer9::initialize(unsigned int bufferSize, GLenum indexType, bool dynamic)
-{
-    if (mIndexBuffer)
-    {
-        mIndexBuffer->Release();
-        mIndexBuffer = NULL;
-    }
-
-    updateSerial();
-
-    if (bufferSize > 0)
-    {
-        D3DFORMAT format;
-        if (indexType == GL_UNSIGNED_SHORT || indexType == GL_UNSIGNED_BYTE)
-        {
-            format = D3DFMT_INDEX16;
-        }
-        else if (indexType == GL_UNSIGNED_INT)
-        {
-            if (mRenderer->get32BitIndexSupport())
-            {
-                format = D3DFMT_INDEX32;
-            }
-            else
-            {
-                ERR("Attempted to create a 32-bit index buffer but renderer does not support 32-bit indices.");
-                return false;
-            }
-        }
-        else
-        {
-            ERR("Invalid index type %u.", indexType);
-            return false;
-        }
-
-        DWORD usageFlags = D3DUSAGE_WRITEONLY;
-        if (dynamic)
-        {
-            usageFlags |= D3DUSAGE_DYNAMIC;
-        }
-
-        HRESULT result = mRenderer->createIndexBuffer(bufferSize, usageFlags, format, &mIndexBuffer);
-        if (FAILED(result))
-        {
-            ERR("Failed to create an index buffer of size %u, result: 0x%08x.", mBufferSize, result);
-            return false;
-        }
-    }
-
-    mBufferSize = bufferSize;
-    mIndexType = indexType;
-    mDynamic = dynamic;
-
-    return true;
-}
-
-IndexBuffer9 *IndexBuffer9::makeIndexBuffer9(IndexBuffer *indexBuffer)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(IndexBuffer9*, indexBuffer));
-    return static_cast<IndexBuffer9*>(indexBuffer);
-}
-
-bool IndexBuffer9::mapBuffer(unsigned int offset, unsigned int size, void** outMappedMemory)
-{
-    if (mIndexBuffer)
-    {
-        DWORD lockFlags = mDynamic ? D3DLOCK_NOOVERWRITE : 0;
-
-        void *mapPtr = NULL;
-        HRESULT result = mIndexBuffer->Lock(offset, size, &mapPtr, lockFlags);
-        if (FAILED(result))
-        {
-            ERR("Index buffer lock failed with error 0x%08x", result);
-            return false;
-        }
-
-        *outMappedMemory = mapPtr;
-        return true;
-    }
-    else
-    {
-        ERR("Index buffer not initialized.");
-        return false;
-    }
-}
-
-bool IndexBuffer9::unmapBuffer()
-{
-    if (mIndexBuffer)
-    {
-        HRESULT result = mIndexBuffer->Unlock();
-        if (FAILED(result))
-        {
-            ERR("Index buffer unlock failed with error 0x%08x", result);
-            return false;
-        }
-
-        return true;
-    }
-    else
-    {
-        ERR("Index buffer not initialized.");
-        return false;
-    }
-}
-
-GLenum IndexBuffer9::getIndexType() const
-{
-    return mIndexType;
-}
-
-unsigned int IndexBuffer9::getBufferSize() const
-{
-    return mBufferSize;
-}
-
-bool IndexBuffer9::setSize(unsigned int bufferSize, GLenum indexType)
-{
-    if (bufferSize > mBufferSize || indexType != mIndexType)
-    {
-        return initialize(bufferSize, indexType, mDynamic);
-    }
-    else
-    {
-        return true;
-    }
-}
-
-bool IndexBuffer9::discard()
-{
-    if (mIndexBuffer)
-    {
-        void *dummy;
-        HRESULT result;
-
-        result = mIndexBuffer->Lock(0, 1, &dummy, D3DLOCK_DISCARD);
-        if (FAILED(result))
-        {
-            ERR("Discard lock failed with error 0x%08x", result);
-            return false;
-        }
-
-        result = mIndexBuffer->Unlock();
-        if (FAILED(result))
-        {
-            ERR("Discard unlock failed with error 0x%08x", result);
-            return false;
-        }
-
-        return true;
-    }
-    else
-    {
-        ERR("Index buffer not initialized.");
-        return false;
-    }
-}
-
-D3DFORMAT IndexBuffer9::getIndexFormat() const
-{
-    switch (mIndexType)
-    {
-      case GL_UNSIGNED_BYTE:    return D3DFMT_INDEX16;
-      case GL_UNSIGNED_SHORT:   return D3DFMT_INDEX16;
-      case GL_UNSIGNED_INT:     return D3DFMT_INDEX32;
-      default: UNREACHABLE();   return D3DFMT_UNKNOWN;
-    }
-}
-
-IDirect3DIndexBuffer9 * IndexBuffer9::getBuffer() const
-{
-    return mIndexBuffer;
-}
-
-}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Query9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Query9.cpp
deleted file mode 100644
index 72781cbc39..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Query9.cpp
+++ /dev/null
@@ -1,125 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Query9.cpp: Defines the rx::Query9 class which implements rx::QueryImpl.
-
-
-#include "libGLESv2/renderer/d3d9/Query9.h"
-#include "libGLESv2/main.h"
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-
-namespace rx
-{
-
-Query9::Query9(rx::Renderer9 *renderer, GLenum type) : QueryImpl(type)
-{
-    mRenderer = renderer;
-    mQuery = NULL;
-}
-
-Query9::~Query9()
-{
-    if (mQuery)
-    {
-        mQuery->Release();
-        mQuery = NULL;
-    }
-}
-
-void Query9::begin()
-{
-    if (mQuery == NULL)
-    {
-        if (FAILED(mRenderer->getDevice()->CreateQuery(D3DQUERYTYPE_OCCLUSION, &mQuery)))
-        {
-            return gl::error(GL_OUT_OF_MEMORY);
-        }
-    }
-
-    HRESULT result = mQuery->Issue(D3DISSUE_BEGIN);
-    ASSERT(SUCCEEDED(result));
-}
-
-void Query9::end()
-{
-    if (mQuery == NULL)
-    {
-        return gl::error(GL_INVALID_OPERATION);
-    }
-
-    HRESULT result = mQuery->Issue(D3DISSUE_END);
-    ASSERT(SUCCEEDED(result));
-
-    mStatus = GL_FALSE;
-    mResult = GL_FALSE;
-}
-
-GLuint Query9::getResult()
-{
-    if (mQuery != NULL)
-    {
-        while (!testQuery())
-        {
-            Sleep(0);
-            // explicitly check for device loss
-            // some drivers seem to return S_FALSE even if the device is lost
-            // instead of D3DERR_DEVICELOST like they should
-            if (mRenderer->testDeviceLost(true))
-            {
-                return gl::error(GL_OUT_OF_MEMORY, 0);
-            }
-        }
-    }
-
-    return mResult;
-}
-
-GLboolean Query9::isResultAvailable()
-{
-    if (mQuery != NULL)
-    {
-        testQuery();
-    }
-
-    return mStatus;
-}
-
-GLboolean Query9::testQuery()
-{
-    if (mQuery != NULL && mStatus != GL_TRUE)
-    {
-        DWORD numPixels = 0;
-
-        HRESULT hres = mQuery->GetData(&numPixels, sizeof(DWORD), D3DGETDATA_FLUSH);
-        if (hres == S_OK)
-        {
-            mStatus =  GL_TRUE;
-
-            switch (getType())
-            {
-              case GL_ANY_SAMPLES_PASSED_EXT:
-              case GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT:
-                mResult = (numPixels > 0) ? GL_TRUE : GL_FALSE;
-                break;
-              default:
-                ASSERT(false);
-            }
-        }
-        else if (d3d9::isDeviceLostError(hres))
-        {
-            mRenderer->notifyDeviceLost();
-            return gl::error(GL_OUT_OF_MEMORY, GL_TRUE);
-        }
-
-        return mStatus;
-    }
-
-    return GL_TRUE; // prevent blocking when query is null
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/RenderTarget9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/RenderTarget9.cpp
deleted file mode 100644
index 090431db99..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/RenderTarget9.cpp
+++ /dev/null
@@ -1,113 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// RenderTarget9.cpp: Implements a D3D9-specific wrapper for IDirect3DSurface9
-// pointers retained by renderbuffers.
-
-#include "libGLESv2/renderer/d3d9/RenderTarget9.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/main.h"
-
-namespace rx
-{
-
-RenderTarget9::RenderTarget9(Renderer *renderer, IDirect3DSurface9 *surface)
-{
-    mRenderer = Renderer9::makeRenderer9(renderer);
-    mRenderTarget = surface;
-
-    if (mRenderTarget)
-    {
-        D3DSURFACE_DESC description;
-        mRenderTarget->GetDesc(&description);
-
-        mWidth = description.Width;
-        mHeight = description.Height;
-        
-        mInternalFormat = d3d9_gl::GetEquivalentFormat(description.Format);
-        mActualFormat = d3d9_gl::GetEquivalentFormat(description.Format);
-        mSamples = d3d9_gl::GetSamplesFromMultisampleType(description.MultiSampleType);
-    }
-}
-
-RenderTarget9::RenderTarget9(Renderer *renderer, GLsizei width, GLsizei height, GLenum format, GLsizei samples)
-{
-    mRenderer = Renderer9::makeRenderer9(renderer);
-    mRenderTarget = NULL;
-
-    D3DFORMAT requestedFormat = gl_d3d9::ConvertRenderbufferFormat(format);
-    int supportedSamples = mRenderer->getNearestSupportedSamples(requestedFormat, samples);
-
-    if (supportedSamples == -1)
-    {
-        gl::error(GL_OUT_OF_MEMORY);
-
-        return;
-    }
-
-    HRESULT result = D3DERR_INVALIDCALL;
-    
-    if (width > 0 && height > 0)
-    {
-        if (requestedFormat == D3DFMT_D24S8)
-        {
-            result = mRenderer->getDevice()->CreateDepthStencilSurface(width, height, requestedFormat,
-                                                                       gl_d3d9::GetMultisampleTypeFromSamples(supportedSamples),
-                                                                       0, FALSE, &mRenderTarget, NULL);
-        }
-        else
-        {
-            result = mRenderer->getDevice()->CreateRenderTarget(width, height, requestedFormat, 
-                                                                gl_d3d9::GetMultisampleTypeFromSamples(supportedSamples),
-                                                                0, FALSE, &mRenderTarget, NULL);
-        }
-
-        if (result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY)
-        {
-            gl::error(GL_OUT_OF_MEMORY);
-
-            return;
-        }
-
-        ASSERT(SUCCEEDED(result));
-    }
-
-    mWidth = width;
-    mHeight = height;
-    mInternalFormat = format;
-    mSamples = supportedSamples;
-    mActualFormat = d3d9_gl::GetEquivalentFormat(requestedFormat);
-}
-
-RenderTarget9::~RenderTarget9()
-{
-    if (mRenderTarget)
-    {
-        mRenderTarget->Release();
-    }
-}
-
-RenderTarget9 *RenderTarget9::makeRenderTarget9(RenderTarget *target)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(rx::RenderTarget9*, target));
-    return static_cast<rx::RenderTarget9*>(target);
-}
-
-IDirect3DSurface9 *RenderTarget9::getSurface()
-{
-    // Caller is responsible for releasing the returned surface reference.
-    if (mRenderTarget)
-    {
-        mRenderTarget->AddRef();
-    }
-
-    return mRenderTarget;
-}
-
-}
\ No newline at end of file
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Renderer9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Renderer9.h
deleted file mode 100644
index 24fd2bdd84..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Renderer9.h
+++ /dev/null
@@ -1,356 +0,0 @@
-//
-// Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// Renderer9.h: Defines a back-end specific class for the D3D9 renderer.
-
-#ifndef LIBGLESV2_RENDERER_RENDERER9_H_
-#define LIBGLESV2_RENDERER_RENDERER9_H_
-
-#include "common/angleutils.h"
-#include "libGLESv2/mathutil.h"
-#include "libGLESv2/renderer/ShaderCache.h"
-#include "libGLESv2/renderer/d3d9/VertexDeclarationCache.h"
-#include "libGLESv2/renderer/Renderer.h"
-#include "libGLESv2/renderer/RenderTarget.h"
-
-namespace gl
-{
-class Renderbuffer;
-}
-
-namespace rx
-{
-class VertexDataManager;
-class IndexDataManager;
-class StreamingIndexBufferInterface;
-struct TranslatedAttribute;
-
-class Renderer9 : public Renderer
-{
-  public:
-    Renderer9(egl::Display *display, HDC hDc, bool softwareDevice);
-    virtual ~Renderer9();
-
-    static Renderer9 *makeRenderer9(Renderer *renderer);
-
-    virtual EGLint initialize();
-    virtual bool resetDevice();
-
-    virtual int generateConfigs(ConfigDesc **configDescList);
-    virtual void deleteConfigs(ConfigDesc *configDescList);
-
-    void startScene();
-    void endScene();
-
-    virtual void sync(bool block);
-
-    virtual SwapChain *createSwapChain(HWND window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat);
-
-    IDirect3DQuery9* allocateEventQuery();
-    void freeEventQuery(IDirect3DQuery9* query);
-
-    // resource creation
-    IDirect3DVertexShader9 *createVertexShader(const DWORD *function, size_t length);
-    IDirect3DPixelShader9 *createPixelShader(const DWORD *function, size_t length);
-    HRESULT createVertexBuffer(UINT Length, DWORD Usage, IDirect3DVertexBuffer9 **ppVertexBuffer);
-    HRESULT createIndexBuffer(UINT Length, DWORD Usage, D3DFORMAT Format, IDirect3DIndexBuffer9 **ppIndexBuffer);
-#if 0
-    void *createTexture2D();
-    void *createTextureCube();
-    void *createQuery();
-    void *createIndexBuffer();
-    void *createVertexbuffer();
-
-    // state setup
-    void applyShaders();
-    void applyConstants();
-#endif
-    virtual void setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler);
-    virtual void setTexture(gl::SamplerType type, int index, gl::Texture *texture);
-
-    virtual void setRasterizerState(const gl::RasterizerState &rasterState);
-    virtual void setBlendState(gl::Framebuffer *framebuffer, const gl::BlendState &blendState, const gl::Color &blendColor,
-                               unsigned int sampleMask);
-    virtual void setDepthStencilState(const gl::DepthStencilState &depthStencilState, int stencilRef,
-                                      int stencilBackRef, bool frontFaceCCW);
-
-    virtual void setScissorRectangle(const gl::Rectangle &scissor, bool enabled);
-    virtual bool setViewport(const gl::Rectangle &viewport, float zNear, float zFar, GLenum drawMode, GLenum frontFace,
-                             bool ignoreViewport);
-
-    virtual bool applyRenderTarget(gl::Framebuffer *frameBuffer);
-    virtual void applyShaders(gl::ProgramBinary *programBinary);
-    virtual void applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArray *uniformArray);
-    virtual bool applyPrimitiveType(GLenum primitiveType, GLsizei elementCount);
-    virtual GLenum applyVertexBuffer(gl::ProgramBinary *programBinary, gl::VertexAttribute vertexAttributes[], GLint first, GLsizei count, GLsizei instances);
-    virtual GLenum applyIndexBuffer(const GLvoid *indices, gl::Buffer *elementArrayBuffer, GLsizei count, GLenum mode, GLenum type, TranslatedIndexData *indexInfo);
-
-    virtual void drawArrays(GLenum mode, GLsizei count, GLsizei instances);
-    virtual void drawElements(GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, gl::Buffer *elementArrayBuffer, const TranslatedIndexData &indexInfo, GLsizei instances);
-
-    virtual void clear(const gl::ClearParameters &clearParams, gl::Framebuffer *frameBuffer);
-
-    virtual void markAllStateDirty();
-
-    // lost device
-    void notifyDeviceLost();
-    virtual bool isDeviceLost();
-    virtual bool testDeviceLost(bool notify);
-    virtual bool testDeviceResettable();
-
-    // Renderer capabilities
-    IDirect3DDevice9 *getDevice() { return mDevice; }
-    virtual DWORD getAdapterVendor() const;
-    virtual std::string getRendererDescription() const;
-    virtual GUID getAdapterIdentifier() const;
-
-    virtual bool getBGRATextureSupport() const;
-    virtual bool getDXT1TextureSupport();
-    virtual bool getDXT3TextureSupport();
-    virtual bool getDXT5TextureSupport();
-    virtual bool getEventQuerySupport();
-    virtual bool getFloat32TextureSupport(bool *filtering, bool *renderable);
-    virtual bool getFloat16TextureSupport(bool *filtering, bool *renderable);
-    virtual bool getLuminanceTextureSupport();
-    virtual bool getLuminanceAlphaTextureSupport();
-    virtual unsigned int getMaxVertexTextureImageUnits() const;
-    virtual unsigned int getMaxCombinedTextureImageUnits() const;
-    virtual unsigned int getReservedVertexUniformVectors() const;
-    virtual unsigned int getReservedFragmentUniformVectors() const;
-    virtual unsigned int getMaxVertexUniformVectors() const;
-    virtual unsigned int getMaxFragmentUniformVectors() const;
-    virtual unsigned int getMaxVaryingVectors() const;
-    virtual bool getNonPower2TextureSupport() const;
-    virtual bool getDepthTextureSupport() const;
-    virtual bool getOcclusionQuerySupport() const;
-    virtual bool getInstancingSupport() const;
-    virtual bool getTextureFilterAnisotropySupport() const;
-    virtual float getTextureMaxAnisotropy() const;
-    virtual bool getShareHandleSupport() const;
-    virtual bool getDerivativeInstructionSupport() const;
-    virtual bool getPostSubBufferSupport() const;
-
-    virtual int getMajorShaderModel() const;
-    virtual float getMaxPointSize() const;
-    virtual int getMaxViewportDimension() const;
-    virtual int getMaxTextureWidth() const;
-    virtual int getMaxTextureHeight() const;
-    virtual bool get32BitIndexSupport() const;
-    DWORD getCapsDeclTypes() const;
-    virtual int getMinSwapInterval() const;
-    virtual int getMaxSwapInterval() const;
-
-    virtual GLsizei getMaxSupportedSamples() const;
-    int getNearestSupportedSamples(D3DFORMAT format, int requested) const;
-    
-    virtual unsigned int getMaxRenderTargets() const;
-
-    D3DFORMAT ConvertTextureInternalFormat(GLint internalformat);
-
-    // Pixel operations
-    virtual bool copyToRenderTarget(TextureStorageInterface2D *dest, TextureStorageInterface2D *source);
-    virtual bool copyToRenderTarget(TextureStorageInterfaceCube *dest, TextureStorageInterfaceCube *source);
-
-    virtual bool copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterface2D *storage, GLint level);
-    virtual bool copyImage(gl::Framebuffer *framebuffer, const gl::Rectangle &sourceRect, GLenum destFormat,
-                           GLint xoffset, GLint yoffset, TextureStorageInterfaceCube *storage, GLenum target, GLint level);
-
-    virtual bool blitRect(gl::Framebuffer *readTarget, const gl::Rectangle &readRect, gl::Framebuffer *drawTarget, const gl::Rectangle &drawRect,
-                          bool blitRenderTarget, bool blitDepthStencil);
-    virtual void readPixels(gl::Framebuffer *framebuffer, GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type,
-                            GLsizei outputPitch, bool packReverseRowOrder, GLint packAlignment, void* pixels);
-
-    // RenderTarget creation
-    virtual RenderTarget *createRenderTarget(SwapChain *swapChain, bool depth);
-    virtual RenderTarget *createRenderTarget(int width, int height, GLenum format, GLsizei samples, bool depth);
-
-    // Shader operations
-    virtual ShaderExecutable *loadExecutable(const void *function, size_t length, rx::ShaderType type);
-    virtual ShaderExecutable *compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type, D3DWorkaroundType workaround);
-
-    // Image operations
-    virtual Image *createImage();
-    virtual void generateMipmap(Image *dest, Image *source);
-    virtual TextureStorage *createTextureStorage2D(SwapChain *swapChain);
-    virtual TextureStorage *createTextureStorage2D(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height);
-    virtual TextureStorage *createTextureStorageCube(int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size);
-
-    // Buffer creation
-    virtual VertexBuffer *createVertexBuffer();
-    virtual IndexBuffer *createIndexBuffer();
-    virtual BufferStorage *createBufferStorage();
-
-    // Query and Fence creation
-    virtual QueryImpl *createQuery(GLenum type);
-    virtual FenceImpl *createFence();
-
-    // D3D9-renderer specific methods
-    bool boxFilter(IDirect3DSurface9 *source, IDirect3DSurface9 *dest);
-
-    D3DPOOL getTexturePool(DWORD usage) const;
-
-    virtual bool getLUID(LUID *adapterLuid) const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(Renderer9);
-
-    void deinitialize();
-
-    void applyUniformnfv(gl::Uniform *targetUniform, const GLfloat *v);
-    void applyUniformniv(gl::Uniform *targetUniform, const GLint *v);
-    void applyUniformnbv(gl::Uniform *targetUniform, const GLint *v);
-
-    void drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer);
-    void drawIndexedPoints(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer);
-
-    void getMultiSampleSupport(D3DFORMAT format, bool *multiSampleArray);
-    bool copyToRenderTarget(IDirect3DSurface9 *dest, IDirect3DSurface9 *source, bool fromManaged);
-    gl::Renderbuffer *getNullColorbuffer(gl::Renderbuffer *depthbuffer);
-
-    D3DPOOL getBufferPool(DWORD usage) const;
-
-    HMODULE mD3d9Module;
-    HDC mDc;
-
-    void initializeDevice();
-    D3DPRESENT_PARAMETERS getDefaultPresentParameters();
-    void releaseDeviceResources();
-
-    HRESULT getDeviceStatusCode();
-    bool isRemovedDeviceResettable() const;
-    bool resetRemovedDevice();
-
-    UINT mAdapter;
-    D3DDEVTYPE mDeviceType;
-    bool mSoftwareDevice;   // FIXME: Deprecate
-    IDirect3D9 *mD3d9;  // Always valid after successful initialization.
-    IDirect3D9Ex *mD3d9Ex;  // Might be null if D3D9Ex is not supported.
-    IDirect3DDevice9 *mDevice;
-    IDirect3DDevice9Ex *mDeviceEx;  // Might be null if D3D9Ex is not supported.
-
-    Blit *mBlit;
-
-    HWND mDeviceWindow;
-
-    bool mDeviceLost;
-    D3DCAPS9 mDeviceCaps;
-    D3DADAPTER_IDENTIFIER9 mAdapterIdentifier;
-
-    D3DPRIMITIVETYPE mPrimitiveType;
-    int mPrimitiveCount;
-    GLsizei mRepeatDraw;
-
-    bool mSceneStarted;
-    bool mSupportsNonPower2Textures;
-    bool mSupportsTextureFilterAnisotropy;
-    int mMinSwapInterval;
-    int mMaxSwapInterval;
-
-    bool mOcclusionQuerySupport;
-    bool mEventQuerySupport;
-    bool mVertexTextureSupport;
-
-    bool mDepthTextureSupport;
-
-    bool mFloat32TextureSupport;
-    bool mFloat32FilterSupport;
-    bool mFloat32RenderSupport;
-
-    bool mFloat16TextureSupport;
-    bool mFloat16FilterSupport;
-    bool mFloat16RenderSupport;
-
-    bool mDXT1TextureSupport;
-    bool mDXT3TextureSupport;
-    bool mDXT5TextureSupport;
-
-    bool mLuminanceTextureSupport;
-    bool mLuminanceAlphaTextureSupport;
-
-    std::map<D3DFORMAT, bool *> mMultiSampleSupport;
-    GLsizei mMaxSupportedSamples;
-
-    // current render target states
-    unsigned int mAppliedRenderTargetSerial;
-    unsigned int mAppliedDepthbufferSerial;
-    unsigned int mAppliedStencilbufferSerial;
-    bool mDepthStencilInitialized;
-    bool mRenderTargetDescInitialized;
-    rx::RenderTarget::Desc mRenderTargetDesc;
-    unsigned int mCurStencilSize;
-    unsigned int mCurDepthSize;
-
-    IDirect3DStateBlock9 *mMaskedClearSavedState;
-
-    // previously set render states
-    bool mForceSetDepthStencilState;
-    gl::DepthStencilState mCurDepthStencilState;
-    int mCurStencilRef;
-    int mCurStencilBackRef;
-    bool mCurFrontFaceCCW;
-
-    bool mForceSetRasterState;
-    gl::RasterizerState mCurRasterState;
-
-    bool mForceSetScissor;
-    gl::Rectangle mCurScissor;
-    bool mScissorEnabled;
-
-    bool mForceSetViewport;
-    gl::Rectangle mCurViewport;
-    float mCurNear;
-    float mCurFar;
-    float mCurDepthFront;
-
-    bool mForceSetBlendState;
-    gl::BlendState mCurBlendState;
-    gl::Color mCurBlendColor;
-    GLuint mCurSampleMask;
-
-    // Currently applied sampler states
-    bool mForceSetVertexSamplerStates[gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
-    gl::SamplerState mCurVertexSamplerStates[gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
-
-    bool mForceSetPixelSamplerStates[gl::MAX_TEXTURE_IMAGE_UNITS];
-    gl::SamplerState mCurPixelSamplerStates[gl::MAX_TEXTURE_IMAGE_UNITS];
-
-    // Currently applied textures
-    unsigned int mCurVertexTextureSerials[gl::IMPLEMENTATION_MAX_VERTEX_TEXTURE_IMAGE_UNITS];
-    unsigned int mCurPixelTextureSerials[gl::MAX_TEXTURE_IMAGE_UNITS];
-
-    unsigned int mAppliedIBSerial;
-    unsigned int mAppliedProgramBinarySerial;
-    
-    rx::dx_VertexConstants mVertexConstants;
-    rx::dx_PixelConstants mPixelConstants;
-    bool mDxUniformsDirty;
-
-    // A pool of event queries that are currently unused.
-    std::vector<IDirect3DQuery9*> mEventQueryPool;
-    VertexShaderCache mVertexShaderCache;
-    PixelShaderCache mPixelShaderCache;
-
-    VertexDataManager *mVertexDataManager;
-    VertexDeclarationCache mVertexDeclarationCache;
-
-    IndexDataManager *mIndexDataManager;
-    StreamingIndexBufferInterface *mLineLoopIB;
-
-    enum { NUM_NULL_COLORBUFFER_CACHE_ENTRIES = 12 };
-    struct NullColorbufferCacheEntry
-    {
-        UINT lruCount;
-        int width;
-        int height;
-        gl::Renderbuffer *buffer;
-    } mNullColorbufferCache[NUM_NULL_COLORBUFFER_CACHE_ENTRIES];
-    UINT mMaxNullColorbufferLRU;
-
-};
-
-}
-#endif // LIBGLESV2_RENDERER_RENDERER9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexBuffer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexBuffer9.cpp
deleted file mode 100644
index 57f5bcd256..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexBuffer9.cpp
+++ /dev/null
@@ -1,530 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexBuffer9.cpp: Defines the D3D9 VertexBuffer implementation.
-
-#include "libGLESv2/renderer/d3d9/VertexBuffer9.h"
-#include "libGLESv2/renderer/d3d9/vertexconversion.h"
-#include "libGLESv2/renderer/BufferStorage.h"
-#include "libGLESv2/Context.h"
-#include "libGLESv2/renderer/d3d9/Renderer9.h"
-
-#include "libGLESv2/Buffer.h"
-
-namespace rx
-{
-
-bool VertexBuffer9::mTranslationsInitialized = false;
-VertexBuffer9::FormatConverter VertexBuffer9::mFormatConverters[NUM_GL_VERTEX_ATTRIB_TYPES][2][4];
-
-VertexBuffer9::VertexBuffer9(rx::Renderer9 *const renderer) : mRenderer(renderer)
-{
-    mVertexBuffer = NULL;
-    mBufferSize = 0;
-    mDynamicUsage = false;
-
-    if (!mTranslationsInitialized)
-    {
-        initializeTranslations(renderer->getCapsDeclTypes());
-        mTranslationsInitialized = true;
-    }
-}
-
-VertexBuffer9::~VertexBuffer9()
-{
-    if (mVertexBuffer)
-    {
-        mVertexBuffer->Release();
-        mVertexBuffer = NULL;
-    }
-}
-
-bool VertexBuffer9::initialize(unsigned int size, bool dynamicUsage)
-{
-    if (mVertexBuffer)
-    {
-        mVertexBuffer->Release();
-        mVertexBuffer = NULL;
-    }
-
-    updateSerial();
-
-    if (size > 0)
-    {
-        DWORD flags = D3DUSAGE_WRITEONLY;
-        if (dynamicUsage)
-        {
-            flags |= D3DUSAGE_DYNAMIC;
-        }
-
-        HRESULT result = mRenderer->createVertexBuffer(size, flags, &mVertexBuffer);
-
-        if (FAILED(result))
-        {
-            ERR("Out of memory allocating a vertex buffer of size %lu.", size);
-            return false;
-        }
-    }
-
-    mBufferSize = size;
-    mDynamicUsage = dynamicUsage;
-    return true;
-}
-
-VertexBuffer9 *VertexBuffer9::makeVertexBuffer9(VertexBuffer *vertexBuffer)
-{
-    ASSERT(HAS_DYNAMIC_TYPE(VertexBuffer9*, vertexBuffer));
-    return static_cast<VertexBuffer9*>(vertexBuffer);
-}
-
-bool VertexBuffer9::storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count,
-                                             GLsizei instances, unsigned int offset)
-{
-    if (mVertexBuffer)
-    {
-        gl::Buffer *buffer = attrib.mBoundBuffer.get();
-
-        int inputStride = attrib.stride();
-        int elementSize = attrib.typeSize();
-        const FormatConverter &converter = formatConverter(attrib);
-
-        DWORD lockFlags = mDynamicUsage ? D3DLOCK_NOOVERWRITE : 0;
-
-        void *mapPtr = NULL;
-
-        unsigned int mapSize;
-        if (!spaceRequired(attrib, count, instances, &mapSize))
-        {
-            return false;
-        }
-
-        HRESULT result = mVertexBuffer->Lock(offset, mapSize, &mapPtr, lockFlags);
-
-        if (FAILED(result))
-        {
-            ERR("Lock failed with error 0x%08x", result);
-            return false;
-        }
-
-        const char *input = NULL;
-        if (buffer)
-        {
-            BufferStorage *storage = buffer->getStorage();
-            input = static_cast<const char*>(storage->getData()) + static_cast<int>(attrib.mOffset);
-        }
-        else
-        {
-            input = static_cast<const char*>(attrib.mPointer);
-        }
-
-        if (instances == 0 || attrib.mDivisor == 0)
-        {
-            input += inputStride * start;
-        }
-
-        if (converter.identity && inputStride == elementSize)
-        {
-            memcpy(mapPtr, input, count * inputStride);
-        }
-        else
-        {
-            converter.convertArray(input, inputStride, count, mapPtr);
-        }
-
-        mVertexBuffer->Unlock();
-
-        return true;
-    }
-    else
-    {
-        ERR("Vertex buffer not initialized.");
-        return false;
-    }
-}
-
-bool VertexBuffer9::storeRawData(const void* data, unsigned int size, unsigned int offset)
-{
-    if (mVertexBuffer)
-    {
-        DWORD lockFlags = mDynamicUsage ? D3DLOCK_NOOVERWRITE : 0;
-
-        void *mapPtr = NULL;
-        HRESULT result = mVertexBuffer->Lock(offset, size, &mapPtr, lockFlags);
-
-        if (FAILED(result))
-        {
-            ERR("Lock failed with error 0x%08x", result);
-            return false;
-        }
-
-        memcpy(mapPtr, data, size);
-
-        mVertexBuffer->Unlock();
-
-        return true;
-    }
-    else
-    {
-        ERR("Vertex buffer not initialized.");
-        return false;
-    }
-}
-
-bool VertexBuffer9::getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances,
-                                     unsigned int *outSpaceRequired) const
-{
-    return spaceRequired(attrib, count, instances, outSpaceRequired);
-}
-
-bool VertexBuffer9::requiresConversion(const gl::VertexAttribute &attrib) const
-{
-    return !formatConverter(attrib).identity;
-}
-
-unsigned int VertexBuffer9::getVertexSize(const gl::VertexAttribute &attrib) const
-{
-    unsigned int spaceRequired;
-    return getSpaceRequired(attrib, 1, 0, &spaceRequired) ? spaceRequired : 0;
-}
-
-D3DDECLTYPE VertexBuffer9::getDeclType(const gl::VertexAttribute &attrib) const
-{
-    return formatConverter(attrib).d3dDeclType;
-}
-
-unsigned int VertexBuffer9::getBufferSize() const
-{
-    return mBufferSize;
-}
-
-bool VertexBuffer9::setBufferSize(unsigned int size)
-{
-    if (size > mBufferSize)
-    {
-        return initialize(size, mDynamicUsage);
-    }
-    else
-    {
-        return true;
-    }
-}
-
-bool VertexBuffer9::discard()
-{
-    if (mVertexBuffer)
-    {
-        void *dummy;
-        HRESULT result;
-
-        result = mVertexBuffer->Lock(0, 1, &dummy, D3DLOCK_DISCARD);
-        if (FAILED(result))
-        {
-            ERR("Discard lock failed with error 0x%08x", result);
-            return false;
-        }
-
-        result = mVertexBuffer->Unlock();
-        if (FAILED(result))
-        {
-            ERR("Discard unlock failed with error 0x%08x", result);
-            return false;
-        }
-
-        return true;
-    }
-    else
-    {
-        ERR("Vertex buffer not initialized.");
-        return false;
-    }
-}
-
-IDirect3DVertexBuffer9 * VertexBuffer9::getBuffer() const
-{
-    return mVertexBuffer;
-}
-
-// Mapping from OpenGL-ES vertex attrib type to D3D decl type:
-//
-// BYTE                 SHORT (Cast)
-// BYTE-norm            FLOAT (Normalize) (can't be exactly represented as SHORT-norm)
-// UNSIGNED_BYTE        UBYTE4 (Identity) or SHORT (Cast)
-// UNSIGNED_BYTE-norm   UBYTE4N (Identity) or FLOAT (Normalize)
-// SHORT                SHORT (Identity)
-// SHORT-norm           SHORT-norm (Identity) or FLOAT (Normalize)
-// UNSIGNED_SHORT       FLOAT (Cast)
-// UNSIGNED_SHORT-norm  USHORT-norm (Identity) or FLOAT (Normalize)
-// FIXED (not in WebGL) FLOAT (FixedToFloat)
-// FLOAT                FLOAT (Identity)
-
-// GLToCType maps from GL type (as GLenum) to the C typedef.
-template <GLenum GLType> struct GLToCType { };
-
-template <> struct GLToCType<GL_BYTE>           { typedef GLbyte type;      };
-template <> struct GLToCType<GL_UNSIGNED_BYTE>  { typedef GLubyte type;     };
-template <> struct GLToCType<GL_SHORT>          { typedef GLshort type;     };
-template <> struct GLToCType<GL_UNSIGNED_SHORT> { typedef GLushort type;    };
-template <> struct GLToCType<GL_FIXED>          { typedef GLuint type;      };
-template <> struct GLToCType<GL_FLOAT>          { typedef GLfloat type;     };
-
-// This differs from D3DDECLTYPE in that it is unsized. (Size expansion is applied last.)
-enum D3DVertexType
-{
-    D3DVT_FLOAT,
-    D3DVT_SHORT,
-    D3DVT_SHORT_NORM,
-    D3DVT_UBYTE,
-    D3DVT_UBYTE_NORM,
-    D3DVT_USHORT_NORM
-};
-
-// D3DToCType maps from D3D vertex type (as enum D3DVertexType) to the corresponding C type.
-template <unsigned int D3DType> struct D3DToCType { };
-
-template <> struct D3DToCType<D3DVT_FLOAT> { typedef float type; };
-template <> struct D3DToCType<D3DVT_SHORT> { typedef short type; };
-template <> struct D3DToCType<D3DVT_SHORT_NORM> { typedef short type; };
-template <> struct D3DToCType<D3DVT_UBYTE> { typedef unsigned char type; };
-template <> struct D3DToCType<D3DVT_UBYTE_NORM> { typedef unsigned char type; };
-template <> struct D3DToCType<D3DVT_USHORT_NORM> { typedef unsigned short type; };
-
-// Encode the type/size combinations that D3D permits. For each type/size it expands to a widener that will provide the appropriate final size.
-template <unsigned int type, int size> struct WidenRule { };
-
-template <int size> struct WidenRule<D3DVT_FLOAT, size>          : NoWiden<size> { };
-template <int size> struct WidenRule<D3DVT_SHORT, size>          : WidenToEven<size> { };
-template <int size> struct WidenRule<D3DVT_SHORT_NORM, size>     : WidenToEven<size> { };
-template <int size> struct WidenRule<D3DVT_UBYTE, size>          : WidenToFour<size> { };
-template <int size> struct WidenRule<D3DVT_UBYTE_NORM, size>     : WidenToFour<size> { };
-template <int size> struct WidenRule<D3DVT_USHORT_NORM, size>    : WidenToEven<size> { };
-
-// VertexTypeFlags encodes the D3DCAPS9::DeclType flag and vertex declaration flag for each D3D vertex type & size combination.
-template <unsigned int d3dtype, int size> struct VertexTypeFlags { };
-
-template <unsigned int _capflag, unsigned int _declflag>
-struct VertexTypeFlagsHelper
-{
-    enum { capflag = _capflag };
-    enum { declflag = _declflag };
-};
-
-template <> struct VertexTypeFlags<D3DVT_FLOAT, 1> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT1> { };
-template <> struct VertexTypeFlags<D3DVT_FLOAT, 2> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT2> { };
-template <> struct VertexTypeFlags<D3DVT_FLOAT, 3> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT3> { };
-template <> struct VertexTypeFlags<D3DVT_FLOAT, 4> : VertexTypeFlagsHelper<0, D3DDECLTYPE_FLOAT4> { };
-template <> struct VertexTypeFlags<D3DVT_SHORT, 2> : VertexTypeFlagsHelper<0, D3DDECLTYPE_SHORT2> { };
-template <> struct VertexTypeFlags<D3DVT_SHORT, 4> : VertexTypeFlagsHelper<0, D3DDECLTYPE_SHORT4> { };
-template <> struct VertexTypeFlags<D3DVT_SHORT_NORM, 2> : VertexTypeFlagsHelper<D3DDTCAPS_SHORT2N, D3DDECLTYPE_SHORT2N> { };
-template <> struct VertexTypeFlags<D3DVT_SHORT_NORM, 4> : VertexTypeFlagsHelper<D3DDTCAPS_SHORT4N, D3DDECLTYPE_SHORT4N> { };
-template <> struct VertexTypeFlags<D3DVT_UBYTE, 4> : VertexTypeFlagsHelper<D3DDTCAPS_UBYTE4, D3DDECLTYPE_UBYTE4> { };
-template <> struct VertexTypeFlags<D3DVT_UBYTE_NORM, 4> : VertexTypeFlagsHelper<D3DDTCAPS_UBYTE4N, D3DDECLTYPE_UBYTE4N> { };
-template <> struct VertexTypeFlags<D3DVT_USHORT_NORM, 2> : VertexTypeFlagsHelper<D3DDTCAPS_USHORT2N, D3DDECLTYPE_USHORT2N> { };
-template <> struct VertexTypeFlags<D3DVT_USHORT_NORM, 4> : VertexTypeFlagsHelper<D3DDTCAPS_USHORT4N, D3DDECLTYPE_USHORT4N> { };
-
-
-// VertexTypeMapping maps GL type & normalized flag to preferred and fallback D3D vertex types (as D3DVertexType enums).
-template <GLenum GLtype, bool normalized> struct VertexTypeMapping { };
-
-template <D3DVertexType Preferred, D3DVertexType Fallback = Preferred>
-struct VertexTypeMappingBase
-{
-    enum { preferred = Preferred };
-    enum { fallback = Fallback };
-};
-
-template <> struct VertexTypeMapping<GL_BYTE, false>                        : VertexTypeMappingBase<D3DVT_SHORT> { };                       // Cast
-template <> struct VertexTypeMapping<GL_BYTE, true>                         : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // Normalize
-template <> struct VertexTypeMapping<GL_UNSIGNED_BYTE, false>               : VertexTypeMappingBase<D3DVT_UBYTE, D3DVT_FLOAT> { };          // Identity, Cast
-template <> struct VertexTypeMapping<GL_UNSIGNED_BYTE, true>                : VertexTypeMappingBase<D3DVT_UBYTE_NORM, D3DVT_FLOAT> { };     // Identity, Normalize
-template <> struct VertexTypeMapping<GL_SHORT, false>                       : VertexTypeMappingBase<D3DVT_SHORT> { };                       // Identity
-template <> struct VertexTypeMapping<GL_SHORT, true>                        : VertexTypeMappingBase<D3DVT_SHORT_NORM, D3DVT_FLOAT> { };     // Cast, Normalize
-template <> struct VertexTypeMapping<GL_UNSIGNED_SHORT, false>              : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // Cast
-template <> struct VertexTypeMapping<GL_UNSIGNED_SHORT, true>               : VertexTypeMappingBase<D3DVT_USHORT_NORM, D3DVT_FLOAT> { };    // Cast, Normalize
-template <bool normalized> struct VertexTypeMapping<GL_FIXED, normalized>   : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // FixedToFloat
-template <bool normalized> struct VertexTypeMapping<GL_FLOAT, normalized>   : VertexTypeMappingBase<D3DVT_FLOAT> { };                       // Identity
-
-
-// Given a GL type & norm flag and a D3D type, ConversionRule provides the type conversion rule (Cast, Normalize, Identity, FixedToFloat).
-// The conversion rules themselves are defined in vertexconversion.h.
-
-// Almost all cases are covered by Cast (including those that are actually Identity since Cast<T,T> knows it's an identity mapping).
-template <GLenum fromType, bool normalized, unsigned int toType>
-struct ConversionRule : Cast<typename GLToCType<fromType>::type, typename D3DToCType<toType>::type> { };
-
-// All conversions from normalized types to float use the Normalize operator.
-template <GLenum fromType> struct ConversionRule<fromType, true, D3DVT_FLOAT> : Normalize<typename GLToCType<fromType>::type> { };
-
-// Use a full specialization for this so that it preferentially matches ahead of the generic normalize-to-float rules.
-template <> struct ConversionRule<GL_FIXED, true, D3DVT_FLOAT>  : FixedToFloat<GLint, 16> { };
-template <> struct ConversionRule<GL_FIXED, false, D3DVT_FLOAT> : FixedToFloat<GLint, 16> { };
-
-// A 2-stage construction is used for DefaultVertexValues because float must use SimpleDefaultValues (i.e. 0/1)
-// whether it is normalized or not.
-template <class T, bool normalized> struct DefaultVertexValuesStage2 { };
-
-template <class T> struct DefaultVertexValuesStage2<T, true>  : NormalizedDefaultValues<T> { };
-template <class T> struct DefaultVertexValuesStage2<T, false> : SimpleDefaultValues<T> { };
-
-// Work out the default value rule for a D3D type (expressed as the C type) and
-template <class T, bool normalized> struct DefaultVertexValues : DefaultVertexValuesStage2<T, normalized> { };
-template <bool normalized> struct DefaultVertexValues<float, normalized> : SimpleDefaultValues<float> { };
-
-// Policy rules for use with Converter, to choose whether to use the preferred or fallback conversion.
-// The fallback conversion produces an output that all D3D9 devices must support.
-template <class T> struct UsePreferred { enum { type = T::preferred }; };
-template <class T> struct UseFallback { enum { type = T::fallback }; };
-
-// Converter ties it all together. Given an OpenGL type/norm/size and choice of preferred/fallback conversion,
-// it provides all the members of the appropriate VertexDataConverter, the D3DCAPS9::DeclTypes flag in cap flag
-// and the D3DDECLTYPE member needed for the vertex declaration in declflag.
-template <GLenum fromType, bool normalized, int size, template <class T> class PreferenceRule>
-struct Converter
-    : VertexDataConverter<typename GLToCType<fromType>::type,
-                          WidenRule<PreferenceRule< VertexTypeMapping<fromType, normalized> >::type, size>,
-                          ConversionRule<fromType,
-                                         normalized,
-                                         PreferenceRule< VertexTypeMapping<fromType, normalized> >::type>,
-                          DefaultVertexValues<typename D3DToCType<PreferenceRule< VertexTypeMapping<fromType, normalized> >::type>::type, normalized > >
-{
-private:
-    enum { d3dtype = PreferenceRule< VertexTypeMapping<fromType, normalized> >::type };
-    enum { d3dsize = WidenRule<d3dtype, size>::finalWidth };
-
-public:
-    enum { capflag = VertexTypeFlags<d3dtype, d3dsize>::capflag };
-    enum { declflag = VertexTypeFlags<d3dtype, d3dsize>::declflag };
-};
-
-// Initialize a TranslationInfo
-#define TRANSLATION(type, norm, size, preferred)                                    \
-    {                                                                               \
-        Converter<type, norm, size, preferred>::identity,                           \
-        Converter<type, norm, size, preferred>::finalSize,                          \
-        Converter<type, norm, size, preferred>::convertArray,                       \
-        static_cast<D3DDECLTYPE>(Converter<type, norm, size, preferred>::declflag)  \
-    }
-
-#define TRANSLATION_FOR_TYPE_NORM_SIZE(type, norm, size)    \
-    {                                                       \
-        Converter<type, norm, size, UsePreferred>::capflag, \
-        TRANSLATION(type, norm, size, UsePreferred),        \
-        TRANSLATION(type, norm, size, UseFallback)          \
-    }
-
-#define TRANSLATIONS_FOR_TYPE(type)                                                                                                                                                                         \
-    {                                                                                                                                                                                                       \
-        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 4) }, \
-        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, true, 4) },     \
-    }
-
-#define TRANSLATIONS_FOR_TYPE_NO_NORM(type)                                                                                                                                                                 \
-    {                                                                                                                                                                                                       \
-        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 4) }, \
-        { TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 1), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 2), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 3), TRANSLATION_FOR_TYPE_NORM_SIZE(type, false, 4) }, \
-    }
-
-const VertexBuffer9::TranslationDescription VertexBuffer9::mPossibleTranslations[NUM_GL_VERTEX_ATTRIB_TYPES][2][4] = // [GL types as enumerated by typeIndex()][normalized][size-1]
-{
-    TRANSLATIONS_FOR_TYPE(GL_BYTE),
-    TRANSLATIONS_FOR_TYPE(GL_UNSIGNED_BYTE),
-    TRANSLATIONS_FOR_TYPE(GL_SHORT),
-    TRANSLATIONS_FOR_TYPE(GL_UNSIGNED_SHORT),
-    TRANSLATIONS_FOR_TYPE_NO_NORM(GL_FIXED),
-    TRANSLATIONS_FOR_TYPE_NO_NORM(GL_FLOAT)
-};
-
-void VertexBuffer9::initializeTranslations(DWORD declTypes)
-{
-    for (unsigned int i = 0; i < NUM_GL_VERTEX_ATTRIB_TYPES; i++)
-    {
-        for (unsigned int j = 0; j < 2; j++)
-        {
-            for (unsigned int k = 0; k < 4; k++)
-            {
-                if (mPossibleTranslations[i][j][k].capsFlag == 0 || (declTypes & mPossibleTranslations[i][j][k].capsFlag) != 0)
-                {
-                    mFormatConverters[i][j][k] = mPossibleTranslations[i][j][k].preferredConversion;
-                }
-                else
-                {
-                    mFormatConverters[i][j][k] = mPossibleTranslations[i][j][k].fallbackConversion;
-                }
-            }
-        }
-    }
-}
-
-unsigned int VertexBuffer9::typeIndex(GLenum type)
-{
-    switch (type)
-    {
-      case GL_BYTE: return 0;
-      case GL_UNSIGNED_BYTE: return 1;
-      case GL_SHORT: return 2;
-      case GL_UNSIGNED_SHORT: return 3;
-      case GL_FIXED: return 4;
-      case GL_FLOAT: return 5;
-
-      default: UNREACHABLE(); return 5;
-    }
-}
-
-const VertexBuffer9::FormatConverter &VertexBuffer9::formatConverter(const gl::VertexAttribute &attribute)
-{
-    return mFormatConverters[typeIndex(attribute.mType)][attribute.mNormalized][attribute.mSize - 1];
-}
-
-bool VertexBuffer9::spaceRequired(const gl::VertexAttribute &attrib, std::size_t count, GLsizei instances,
-                                  unsigned int *outSpaceRequired)
-{
-    unsigned int elementSize = formatConverter(attrib).outputElementSize;
-
-    if (attrib.mArrayEnabled)
-    {
-        unsigned int elementCount = 0;
-        if (instances == 0 || attrib.mDivisor == 0)
-        {
-            elementCount = count;
-        }
-        else
-        {
-            if (static_cast<unsigned int>(instances) < std::numeric_limits<unsigned int>::max() - (attrib.mDivisor - 1))
-            {
-                // Round up
-                elementCount = (static_cast<unsigned int>(instances) + (attrib.mDivisor - 1)) / attrib.mDivisor;
-            }
-            else
-            {
-                elementCount = static_cast<unsigned int>(instances) / attrib.mDivisor;
-            }
-        }
-
-        if (elementSize <= std::numeric_limits<unsigned int>::max() / elementCount)
-        {
-            if (outSpaceRequired)
-            {
-                *outSpaceRequired = elementSize * elementCount;
-            }
-            return true;
-        }
-        else
-        {
-            return false;
-        }
-    }
-    else
-    {
-        const unsigned int elementSize = 4;
-        if (outSpaceRequired)
-        {
-            *outSpaceRequired = elementSize * 4;
-        }
-        return true;
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexBuffer9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexBuffer9.h
deleted file mode 100644
index 2f88117bda..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/VertexBuffer9.h
+++ /dev/null
@@ -1,91 +0,0 @@
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// VertexBuffer9.h: Defines the D3D9 VertexBuffer implementation.
-
-#ifndef LIBGLESV2_RENDERER_VERTEXBUFFER9_H_
-#define LIBGLESV2_RENDERER_VERTEXBUFFER9_H_
-
-#include "libGLESv2/renderer/VertexBuffer.h"
-
-namespace rx
-{
-class Renderer9;
-
-class VertexBuffer9 : public VertexBuffer
-{
-  public:
-    explicit VertexBuffer9(rx::Renderer9 *const renderer);
-    virtual ~VertexBuffer9();
-
-    virtual bool initialize(unsigned int size, bool dynamicUsage);
-
-    static VertexBuffer9 *makeVertexBuffer9(VertexBuffer *vertexBuffer);
-
-    virtual bool storeVertexAttributes(const gl::VertexAttribute &attrib, GLint start, GLsizei count, GLsizei instances,
-                                       unsigned int offset);
-    virtual bool storeRawData(const void* data, unsigned int size, unsigned int offset);
-
-    virtual bool getSpaceRequired(const gl::VertexAttribute &attrib, GLsizei count, GLsizei instances, unsigned int *outSpaceRequired) const;
-
-    virtual bool requiresConversion(const gl::VertexAttribute &attrib) const;
-
-    unsigned int getVertexSize(const gl::VertexAttribute &attrib) const;
-    D3DDECLTYPE getDeclType(const gl::VertexAttribute &attrib) const;
-
-    virtual unsigned int getBufferSize() const;
-    virtual bool setBufferSize(unsigned int size);
-    virtual bool discard();
-
-    IDirect3DVertexBuffer9 *getBuffer() const;
-
-  private:
-    DISALLOW_COPY_AND_ASSIGN(VertexBuffer9);
-
-    rx::Renderer9 *const mRenderer;
-
-    IDirect3DVertexBuffer9 *mVertexBuffer;
-    unsigned int mBufferSize;
-    bool mDynamicUsage;
-
-    // Attribute format conversion
-    enum { NUM_GL_VERTEX_ATTRIB_TYPES = 6 };
-
-    struct FormatConverter
-    {
-        bool identity;
-        std::size_t outputElementSize;
-        void (*convertArray)(const void *in, std::size_t stride, std::size_t n, void *out);
-        D3DDECLTYPE d3dDeclType;
-    };
-
-    static bool mTranslationsInitialized;
-    static void initializeTranslations(DWORD declTypes);
-
-    // [GL types as enumerated by typeIndex()][normalized][size - 1]
-    static FormatConverter mFormatConverters[NUM_GL_VERTEX_ATTRIB_TYPES][2][4];
-
-    struct TranslationDescription
-    {
-        DWORD capsFlag;
-        FormatConverter preferredConversion;
-        FormatConverter fallbackConversion;
-    };
-
-    // This table is used to generate mFormatConverters.
-    // [GL types as enumerated by typeIndex()][normalized][size - 1]
-    static const TranslationDescription mPossibleTranslations[NUM_GL_VERTEX_ATTRIB_TYPES][2][4];
-
-    static unsigned int typeIndex(GLenum type);
-    static const FormatConverter &formatConverter(const gl::VertexAttribute &attribute);
-
-    static bool spaceRequired(const gl::VertexAttribute &attrib, std::size_t count, GLsizei instances,
-                              unsigned int *outSpaceRequired);
-};
-
-}
-
-#endif // LIBGLESV2_RENDERER_VERTEXBUFFER9_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/renderer9_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/renderer9_utils.cpp
deleted file mode 100644
index b7f2ffb1d9..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/renderer9_utils.cpp
+++ /dev/null
@@ -1,500 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// renderer9_utils.cpp: Conversion functions and other utility routines
-// specific to the D3D9 renderer.
-
-#include "libGLESv2/renderer/d3d9/renderer9_utils.h"
-#include "libGLESv2/mathutil.h"
-#include "libGLESv2/Context.h"
-
-#include "common/debug.h"
-
-namespace gl_d3d9
-{
-
-D3DCMPFUNC ConvertComparison(GLenum comparison)
-{
-    D3DCMPFUNC d3dComp = D3DCMP_ALWAYS;
-    switch (comparison)
-    {
-      case GL_NEVER:    d3dComp = D3DCMP_NEVER;        break;
-      case GL_ALWAYS:   d3dComp = D3DCMP_ALWAYS;       break;
-      case GL_LESS:     d3dComp = D3DCMP_LESS;         break;
-      case GL_LEQUAL:   d3dComp = D3DCMP_LESSEQUAL;    break;
-      case GL_EQUAL:    d3dComp = D3DCMP_EQUAL;        break;
-      case GL_GREATER:  d3dComp = D3DCMP_GREATER;      break;
-      case GL_GEQUAL:   d3dComp = D3DCMP_GREATEREQUAL; break;
-      case GL_NOTEQUAL: d3dComp = D3DCMP_NOTEQUAL;     break;
-      default: UNREACHABLE();
-    }
-
-    return d3dComp;
-}
-
-D3DCOLOR ConvertColor(gl::Color color)
-{
-    return D3DCOLOR_RGBA(gl::unorm<8>(color.red),
-                         gl::unorm<8>(color.green),
-                         gl::unorm<8>(color.blue),
-                         gl::unorm<8>(color.alpha));
-}
-
-D3DBLEND ConvertBlendFunc(GLenum blend)
-{
-    D3DBLEND d3dBlend = D3DBLEND_ZERO;
-
-    switch (blend)
-    {
-      case GL_ZERO:                     d3dBlend = D3DBLEND_ZERO;           break;
-      case GL_ONE:                      d3dBlend = D3DBLEND_ONE;            break;
-      case GL_SRC_COLOR:                d3dBlend = D3DBLEND_SRCCOLOR;       break;
-      case GL_ONE_MINUS_SRC_COLOR:      d3dBlend = D3DBLEND_INVSRCCOLOR;    break;
-      case GL_DST_COLOR:                d3dBlend = D3DBLEND_DESTCOLOR;      break;
-      case GL_ONE_MINUS_DST_COLOR:      d3dBlend = D3DBLEND_INVDESTCOLOR;   break;
-      case GL_SRC_ALPHA:                d3dBlend = D3DBLEND_SRCALPHA;       break;
-      case GL_ONE_MINUS_SRC_ALPHA:      d3dBlend = D3DBLEND_INVSRCALPHA;    break;
-      case GL_DST_ALPHA:                d3dBlend = D3DBLEND_DESTALPHA;      break;
-      case GL_ONE_MINUS_DST_ALPHA:      d3dBlend = D3DBLEND_INVDESTALPHA;   break;
-      case GL_CONSTANT_COLOR:           d3dBlend = D3DBLEND_BLENDFACTOR;    break;
-      case GL_ONE_MINUS_CONSTANT_COLOR: d3dBlend = D3DBLEND_INVBLENDFACTOR; break;
-      case GL_CONSTANT_ALPHA:           d3dBlend = D3DBLEND_BLENDFACTOR;    break;
-      case GL_ONE_MINUS_CONSTANT_ALPHA: d3dBlend = D3DBLEND_INVBLENDFACTOR; break;
-      case GL_SRC_ALPHA_SATURATE:       d3dBlend = D3DBLEND_SRCALPHASAT;    break;
-      default: UNREACHABLE();
-    }
-
-    return d3dBlend;
-}
-
-D3DBLENDOP ConvertBlendOp(GLenum blendOp)
-{
-    D3DBLENDOP d3dBlendOp = D3DBLENDOP_ADD;
-
-    switch (blendOp)
-    {
-      case GL_FUNC_ADD:              d3dBlendOp = D3DBLENDOP_ADD;         break;
-      case GL_FUNC_SUBTRACT:         d3dBlendOp = D3DBLENDOP_SUBTRACT;    break;
-      case GL_FUNC_REVERSE_SUBTRACT: d3dBlendOp = D3DBLENDOP_REVSUBTRACT; break;
-      default: UNREACHABLE();
-    }
-
-    return d3dBlendOp;
-}
-
-D3DSTENCILOP ConvertStencilOp(GLenum stencilOp)
-{
-    D3DSTENCILOP d3dStencilOp = D3DSTENCILOP_KEEP;
-
-    switch (stencilOp)
-    {
-      case GL_ZERO:      d3dStencilOp = D3DSTENCILOP_ZERO;    break;
-      case GL_KEEP:      d3dStencilOp = D3DSTENCILOP_KEEP;    break;
-      case GL_REPLACE:   d3dStencilOp = D3DSTENCILOP_REPLACE; break;
-      case GL_INCR:      d3dStencilOp = D3DSTENCILOP_INCRSAT; break;
-      case GL_DECR:      d3dStencilOp = D3DSTENCILOP_DECRSAT; break;
-      case GL_INVERT:    d3dStencilOp = D3DSTENCILOP_INVERT;  break;
-      case GL_INCR_WRAP: d3dStencilOp = D3DSTENCILOP_INCR;    break;
-      case GL_DECR_WRAP: d3dStencilOp = D3DSTENCILOP_DECR;    break;
-      default: UNREACHABLE();
-    }
-
-    return d3dStencilOp;
-}
-
-D3DTEXTUREADDRESS ConvertTextureWrap(GLenum wrap)
-{
-    D3DTEXTUREADDRESS d3dWrap = D3DTADDRESS_WRAP;
-
-    switch (wrap)
-    {
-      case GL_REPEAT:            d3dWrap = D3DTADDRESS_WRAP;   break;
-      case GL_CLAMP_TO_EDGE:     d3dWrap = D3DTADDRESS_CLAMP;  break;
-      case GL_MIRRORED_REPEAT:   d3dWrap = D3DTADDRESS_MIRROR; break;
-      default: UNREACHABLE();
-    }
-
-    return d3dWrap;
-}
-
-D3DCULL ConvertCullMode(GLenum cullFace, GLenum frontFace)
-{
-    D3DCULL cull = D3DCULL_CCW;
-    switch (cullFace)
-    {
-      case GL_FRONT:
-        cull = (frontFace == GL_CCW ? D3DCULL_CW : D3DCULL_CCW);
-        break;
-      case GL_BACK:
-        cull = (frontFace == GL_CCW ? D3DCULL_CCW : D3DCULL_CW);
-        break;
-      case GL_FRONT_AND_BACK:
-        cull = D3DCULL_NONE; // culling will be handled during draw
-        break;
-      default: UNREACHABLE();
-    }
-
-    return cull;
-}
-
-D3DCUBEMAP_FACES ConvertCubeFace(GLenum cubeFace)
-{
-    D3DCUBEMAP_FACES face = D3DCUBEMAP_FACE_POSITIVE_X;
-
-    switch (cubeFace)
-    {
-      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
-        face = D3DCUBEMAP_FACE_POSITIVE_X;
-        break;
-      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
-        face = D3DCUBEMAP_FACE_NEGATIVE_X;
-        break;
-      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
-        face = D3DCUBEMAP_FACE_POSITIVE_Y;
-        break;
-      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
-        face = D3DCUBEMAP_FACE_NEGATIVE_Y;
-        break;
-      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
-        face = D3DCUBEMAP_FACE_POSITIVE_Z;
-        break;
-      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
-        face = D3DCUBEMAP_FACE_NEGATIVE_Z;
-        break;
-      default: UNREACHABLE();
-    }
-
-    return face;
-}
-
-DWORD ConvertColorMask(bool red, bool green, bool blue, bool alpha)
-{
-    return (red   ? D3DCOLORWRITEENABLE_RED   : 0) |
-           (green ? D3DCOLORWRITEENABLE_GREEN : 0) |
-           (blue  ? D3DCOLORWRITEENABLE_BLUE  : 0) |
-           (alpha ? D3DCOLORWRITEENABLE_ALPHA : 0);
-}
-
-D3DTEXTUREFILTERTYPE ConvertMagFilter(GLenum magFilter, float maxAnisotropy)
-{
-    if (maxAnisotropy > 1.0f)
-    {
-        return D3DTEXF_ANISOTROPIC;
-    }
-
-    D3DTEXTUREFILTERTYPE d3dMagFilter = D3DTEXF_POINT;
-    switch (magFilter)
-    {
-      case GL_NEAREST: d3dMagFilter = D3DTEXF_POINT;  break;
-      case GL_LINEAR:  d3dMagFilter = D3DTEXF_LINEAR; break;
-      default: UNREACHABLE();
-    }
-
-    return d3dMagFilter;
-}
-
-void ConvertMinFilter(GLenum minFilter, D3DTEXTUREFILTERTYPE *d3dMinFilter, D3DTEXTUREFILTERTYPE *d3dMipFilter, float maxAnisotropy)
-{
-    switch (minFilter)
-    {
-      case GL_NEAREST:
-        *d3dMinFilter = D3DTEXF_POINT;
-        *d3dMipFilter = D3DTEXF_NONE;
-        break;
-      case GL_LINEAR:
-        *d3dMinFilter = D3DTEXF_LINEAR;
-        *d3dMipFilter = D3DTEXF_NONE;
-        break;
-      case GL_NEAREST_MIPMAP_NEAREST:
-        *d3dMinFilter = D3DTEXF_POINT;
-        *d3dMipFilter = D3DTEXF_POINT;
-        break;
-      case GL_LINEAR_MIPMAP_NEAREST:
-        *d3dMinFilter = D3DTEXF_LINEAR;
-        *d3dMipFilter = D3DTEXF_POINT;
-        break;
-      case GL_NEAREST_MIPMAP_LINEAR:
-        *d3dMinFilter = D3DTEXF_POINT;
-        *d3dMipFilter = D3DTEXF_LINEAR;
-        break;
-      case GL_LINEAR_MIPMAP_LINEAR:
-        *d3dMinFilter = D3DTEXF_LINEAR;
-        *d3dMipFilter = D3DTEXF_LINEAR;
-        break;
-      default:
-        *d3dMinFilter = D3DTEXF_POINT;
-        *d3dMipFilter = D3DTEXF_NONE;
-        UNREACHABLE();
-    }
-
-    if (maxAnisotropy > 1.0f)
-    {
-        *d3dMinFilter = D3DTEXF_ANISOTROPIC;
-    }
-}
-
-D3DFORMAT ConvertRenderbufferFormat(GLenum format)
-{
-    switch (format)
-    {
-      case GL_NONE:                 return D3DFMT_NULL;
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGBA8_OES:            return D3DFMT_A8R8G8B8;
-      case GL_RGB565:               return D3DFMT_R5G6B5;
-      case GL_RGB8_OES:             return D3DFMT_X8R8G8B8;
-      case GL_DEPTH_COMPONENT16:
-      case GL_STENCIL_INDEX8:       
-      case GL_DEPTH24_STENCIL8_OES: return D3DFMT_D24S8;
-      default: UNREACHABLE();       return D3DFMT_A8R8G8B8;
-    }
-}
-
-D3DMULTISAMPLE_TYPE GetMultisampleTypeFromSamples(GLsizei samples)
-{
-    if (samples <= 1)
-        return D3DMULTISAMPLE_NONE;
-    else
-        return (D3DMULTISAMPLE_TYPE)samples;
-}
-
-}
-
-namespace d3d9_gl
-{
-
-unsigned int GetStencilSize(D3DFORMAT stencilFormat)
-{
-    if (stencilFormat == D3DFMT_INTZ)
-    {
-        return 8;
-    }
-    switch(stencilFormat)
-    {
-      case D3DFMT_D24FS8:
-      case D3DFMT_D24S8:
-        return 8;
-      case D3DFMT_D24X4S4:
-        return 4;
-      case D3DFMT_D15S1:
-        return 1;
-      case D3DFMT_D16_LOCKABLE:
-      case D3DFMT_D32:
-      case D3DFMT_D24X8:
-      case D3DFMT_D32F_LOCKABLE:
-      case D3DFMT_D16:
-        return 0;
-    //case D3DFMT_D32_LOCKABLE:  return 0;   // DirectX 9Ex only
-    //case D3DFMT_S8_LOCKABLE:   return 8;   // DirectX 9Ex only
-      default:
-        return 0;
-    }
-}
-
-unsigned int GetAlphaSize(D3DFORMAT colorFormat)
-{
-    switch (colorFormat)
-    {
-      case D3DFMT_A16B16G16R16F:
-        return 16;
-      case D3DFMT_A32B32G32R32F:
-        return 32;
-      case D3DFMT_A2R10G10B10:
-        return 2;
-      case D3DFMT_A8R8G8B8:
-        return 8;
-      case D3DFMT_A1R5G5B5:
-        return 1;
-      case D3DFMT_X8R8G8B8:
-      case D3DFMT_R5G6B5:
-        return 0;
-      default:
-        return 0;
-    }
-}
-
-GLsizei GetSamplesFromMultisampleType(D3DMULTISAMPLE_TYPE type)
-{
-    if (type == D3DMULTISAMPLE_NONMASKABLE)
-        return 0;
-    else
-        return type;
-}
-
-bool IsFormatChannelEquivalent(D3DFORMAT d3dformat, GLenum format)
-{
-    switch (d3dformat)
-    {
-      case D3DFMT_L8:
-        return (format == GL_LUMINANCE);
-      case D3DFMT_A8L8:
-        return (format == GL_LUMINANCE_ALPHA);
-      case D3DFMT_DXT1:
-        return (format == GL_COMPRESSED_RGBA_S3TC_DXT1_EXT || format == GL_COMPRESSED_RGB_S3TC_DXT1_EXT);
-      case D3DFMT_DXT3:
-        return (format == GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE);
-      case D3DFMT_DXT5:
-        return (format == GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE);
-      case D3DFMT_A8R8G8B8:
-      case D3DFMT_A16B16G16R16F:
-      case D3DFMT_A32B32G32R32F:
-        return (format == GL_RGBA || format == GL_BGRA_EXT);
-      case D3DFMT_X8R8G8B8:
-        return (format == GL_RGB);
-      default:
-        if (d3dformat == D3DFMT_INTZ && gl::IsDepthTexture(format))
-            return true;
-        return false;
-    }
-}
-
-GLenum ConvertBackBufferFormat(D3DFORMAT format)
-{
-    switch (format)
-    {
-      case D3DFMT_A4R4G4B4: return GL_RGBA4;
-      case D3DFMT_A8R8G8B8: return GL_RGBA8_OES;
-      case D3DFMT_A1R5G5B5: return GL_RGB5_A1;
-      case D3DFMT_R5G6B5:   return GL_RGB565;
-      case D3DFMT_X8R8G8B8: return GL_RGB8_OES;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_RGBA4;
-}
-
-GLenum ConvertDepthStencilFormat(D3DFORMAT format)
-{
-    if (format == D3DFMT_INTZ)
-    {
-        return GL_DEPTH24_STENCIL8_OES;
-    }
-    switch (format)
-    {
-      case D3DFMT_D16:
-      case D3DFMT_D24X8:
-        return GL_DEPTH_COMPONENT16;
-      case D3DFMT_D24S8:
-        return GL_DEPTH24_STENCIL8_OES;
-      case D3DFMT_UNKNOWN:
-        return GL_NONE;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_DEPTH24_STENCIL8_OES;
-}
-
-GLenum ConvertRenderTargetFormat(D3DFORMAT format)
-{
-    if (format == D3DFMT_INTZ)
-    {
-        return GL_DEPTH24_STENCIL8_OES;
-    }
-    
-    switch (format)
-    {
-      case D3DFMT_A4R4G4B4: return GL_RGBA4;
-      case D3DFMT_A8R8G8B8: return GL_RGBA8_OES;
-      case D3DFMT_A1R5G5B5: return GL_RGB5_A1;
-      case D3DFMT_R5G6B5:   return GL_RGB565;
-      case D3DFMT_X8R8G8B8: return GL_RGB8_OES;
-      case D3DFMT_D16:
-      case D3DFMT_D24X8:
-        return GL_DEPTH_COMPONENT16;
-      case D3DFMT_D24S8:
-        return GL_DEPTH24_STENCIL8_OES;
-      case D3DFMT_UNKNOWN:
-        return GL_NONE;
-      default:
-        UNREACHABLE();
-    }
-
-    return GL_RGBA4;
-}
-
-GLenum GetEquivalentFormat(D3DFORMAT format)
-{
-    if (format == D3DFMT_INTZ)
-        return GL_DEPTH24_STENCIL8_OES;
-    if (format == D3DFMT_NULL)
-        return GL_NONE;
-
-    switch (format)
-    {
-      case D3DFMT_A4R4G4B4:             return GL_RGBA4;
-      case D3DFMT_A8R8G8B8:             return GL_RGBA8_OES;
-      case D3DFMT_A1R5G5B5:             return GL_RGB5_A1;
-      case D3DFMT_R5G6B5:               return GL_RGB565;
-      case D3DFMT_X8R8G8B8:             return GL_RGB8_OES;
-      case D3DFMT_D16:                  return GL_DEPTH_COMPONENT16;
-      case D3DFMT_D24S8:                return GL_DEPTH24_STENCIL8_OES;
-      case D3DFMT_UNKNOWN:              return GL_NONE;
-      case D3DFMT_DXT1:                 return GL_COMPRESSED_RGBA_S3TC_DXT1_EXT;
-      case D3DFMT_DXT3:                 return GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE;
-      case D3DFMT_DXT5:                 return GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE;
-      case D3DFMT_A32B32G32R32F:        return GL_RGBA32F_EXT;
-      case D3DFMT_A16B16G16R16F:        return GL_RGBA16F_EXT;
-      case D3DFMT_L8:                   return GL_LUMINANCE8_EXT;
-      case D3DFMT_A8L8:                 return GL_LUMINANCE8_ALPHA8_EXT;
-      default:              UNREACHABLE();
-        return GL_NONE;
-    }
-}
-
-}
-
-namespace d3d9
-{
-
-bool IsCompressedFormat(D3DFORMAT surfaceFormat)
-{
-    switch(surfaceFormat)
-    {
-      case D3DFMT_DXT1:
-      case D3DFMT_DXT2:
-      case D3DFMT_DXT3:
-      case D3DFMT_DXT4:
-      case D3DFMT_DXT5:
-        return true;
-      default:
-        return false;
-    }
-}
-
-size_t ComputeRowSize(D3DFORMAT format, unsigned int width)
-{
-    if (format == D3DFMT_INTZ)
-    {
-        return 4 * width;
-    }
-    switch (format)
-    {
-      case D3DFMT_L8:
-          return 1 * width;
-      case D3DFMT_A8L8:
-          return 2 * width;
-      case D3DFMT_X8R8G8B8:
-      case D3DFMT_A8R8G8B8:
-        return 4 * width;
-      case D3DFMT_A16B16G16R16F:
-        return 8 * width;
-      case D3DFMT_A32B32G32R32F:
-        return 16 * width;
-      case D3DFMT_DXT1:
-        return 8 * ((width + 3) / 4);
-      case D3DFMT_DXT3:
-      case D3DFMT_DXT5:
-        return 16 * ((width + 3) / 4);
-      default:
-        UNREACHABLE();
-        return 0;
-    }
-}
-
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/shaders/Blit.ps b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/shaders/Blit.ps
deleted file mode 100644
index dcb3bd0e76..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/shaders/Blit.ps
+++ /dev/null
@@ -1,39 +0,0 @@
-//
-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-sampler2D tex : s0;
-
-uniform float4 mode : c0;
-
-// Passthrough Pixel Shader
-// Outputs texture 0 sampled at texcoord 0.
-float4 passthroughps(float4 texcoord : TEXCOORD0) : COLOR
-{
-	return tex2D(tex, texcoord.xy);
-};
-
-// Luminance Conversion Pixel Shader
-// Outputs sample(tex0, tc0).rrra.
-// For LA output (pass A) set C0.X = 1, C0.Y = 0.
-// For L output (A = 1) set C0.X = 0, C0.Y = 1.
-float4 luminanceps(float4 texcoord : TEXCOORD0) : COLOR
-{
-	float4 tmp = tex2D(tex, texcoord.xy);
-	tmp.w = tmp.w * mode.x + mode.y;
-	return tmp.xxxw;
-};
-
-// RGB/A Component Mask Pixel Shader
-// Outputs sample(tex0, tc0) with options to force RGB = 0 and/or A = 1.
-// To force RGB = 0, set C0.X = 0, otherwise C0.X = 1.
-// To force A = 1, set C0.Z = 0, C0.W = 1, otherwise C0.Z = 1, C0.W = 0.
-float4 componentmaskps(float4 texcoord : TEXCOORD0) : COLOR
-{
-	float4 tmp = tex2D(tex, texcoord.xy);
-	tmp.xyz = tmp.xyz * mode.x;
-	tmp.w = tmp.w * mode.z + mode.w;
-	return tmp;
-};
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.h b/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.h
index 8e1973605b..a57b00d444 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.h
@@ -1,5 +1,5 @@
 //
-// Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 //
@@ -10,194 +10,19 @@
 #ifndef LIBGLESV2_RENDERER_GENERATEMIP_H_
 #define LIBGLESV2_RENDERER_GENERATEMIP_H_
 
-#include "libGLESv2/mathutil.h"
+#include "libGLESv2/renderer/imageformats.h"
+#include "libGLESv2/angletypes.h"
 
 namespace rx
 {
-struct L8
-{
-    unsigned char L;
-
-    static void average(L8 *dst, const L8 *src1, const L8 *src2)
-    {
-        dst->L = ((src1->L ^ src2->L) >> 1) + (src1->L & src2->L);
-    }
-};
-
-typedef L8 R8; // R8 type is functionally equivalent for mip purposes
-typedef L8 A8; // A8 type is functionally equivalent for mip purposes
-
-struct A8L8
-{
-    unsigned char L;
-    unsigned char A;
-
-    static void average(A8L8 *dst, const A8L8 *src1, const A8L8 *src2)
-    {
-        *(unsigned short*)dst = (((*(unsigned short*)src1 ^ *(unsigned short*)src2) & 0xFEFE) >> 1) + (*(unsigned short*)src1 & *(unsigned short*)src2);
-    }
-};
-
-typedef A8L8 R8G8; // R8G8 type is functionally equivalent for mip purposes
-
-struct A8R8G8B8
-{
-    unsigned char B;
-    unsigned char G;
-    unsigned char R;
-    unsigned char A;
-
-    static void average(A8R8G8B8 *dst, const A8R8G8B8 *src1, const A8R8G8B8 *src2)
-    {
-        *(unsigned int*)dst = (((*(unsigned int*)src1 ^ *(unsigned int*)src2) & 0xFEFEFEFE) >> 1) + (*(unsigned int*)src1 & *(unsigned int*)src2);
-    }
-};
-
-typedef A8R8G8B8 R8G8B8A8; // R8G8B8A8 type is functionally equivalent for mip purposes
-
-struct A16B16G16R16F
-{
-    unsigned short R;
-    unsigned short G;
-    unsigned short B;
-    unsigned short A;
-
-    static void average(A16B16G16R16F *dst, const A16B16G16R16F *src1, const A16B16G16R16F *src2)
-    {
-        dst->R = gl::float32ToFloat16((gl::float16ToFloat32(src1->R) + gl::float16ToFloat32(src2->R)) * 0.5f);
-        dst->G = gl::float32ToFloat16((gl::float16ToFloat32(src1->G) + gl::float16ToFloat32(src2->G)) * 0.5f);
-        dst->B = gl::float32ToFloat16((gl::float16ToFloat32(src1->B) + gl::float16ToFloat32(src2->B)) * 0.5f);
-        dst->A = gl::float32ToFloat16((gl::float16ToFloat32(src1->A) + gl::float16ToFloat32(src2->A)) * 0.5f);
-    }
-};
-
-struct R16F
-{
-    unsigned short R;
-
-    static void average(R16F *dst, const R16F *src1, const R16F *src2)
-    {
-        dst->R = gl::float32ToFloat16((gl::float16ToFloat32(src1->R) + gl::float16ToFloat32(src2->R)) * 0.5f);
-    }
-};
-
-struct R16G16F
-{
-    unsigned short R;
-    unsigned short G;
-
-    static void average(R16G16F *dst, const R16G16F *src1, const R16G16F *src2)
-    {
-        dst->R = gl::float32ToFloat16((gl::float16ToFloat32(src1->R) + gl::float16ToFloat32(src2->R)) * 0.5f);
-        dst->G = gl::float32ToFloat16((gl::float16ToFloat32(src1->G) + gl::float16ToFloat32(src2->G)) * 0.5f);
-    }
-};
-
-struct A32B32G32R32F
-{
-    float R;
-    float G;
-    float B;
-    float A;
-
-    static void average(A32B32G32R32F *dst, const A32B32G32R32F *src1, const A32B32G32R32F *src2)
-    {
-        dst->R = (src1->R + src2->R) * 0.5f;
-        dst->G = (src1->G + src2->G) * 0.5f;
-        dst->B = (src1->B + src2->B) * 0.5f;
-        dst->A = (src1->A + src2->A) * 0.5f;
-    }
-};
-
-struct R32F
-{
-    float R;
-
-    static void average(R32F *dst, const R32F *src1, const R32F *src2)
-    {
-        dst->R = (src1->R + src2->R) * 0.5f;
-    }
-};
-
-struct R32G32F
-{
-    float R;
-    float G;
-
-    static void average(R32G32F *dst, const R32G32F *src1, const R32G32F *src2)
-    {
-        dst->R = (src1->R + src2->R) * 0.5f;
-        dst->G = (src1->G + src2->G) * 0.5f;
-    }
-};
-
-struct R32G32B32F
-{
-    float R;
-    float G;
-    float B;
-
-    static void average(R32G32B32F *dst, const R32G32B32F *src1, const R32G32B32F *src2)
-    {
-        dst->R = (src1->R + src2->R) * 0.5f;
-        dst->G = (src1->G + src2->G) * 0.5f;
-        dst->B = (src1->B + src2->B) * 0.5f;
-    }
-};
 
 template <typename T>
-static void GenerateMip(unsigned int sourceWidth, unsigned int sourceHeight,
-                        const unsigned char *sourceData, int sourcePitch,
-                        unsigned char *destData, int destPitch)
-{
-    unsigned int mipWidth = std::max(1U, sourceWidth >> 1);
-    unsigned int mipHeight = std::max(1U, sourceHeight >> 1);
-
-    if (sourceHeight == 1)
-    {
-        ASSERT(sourceWidth != 1);
-
-        const T *src = (const T*)sourceData;
-        T *dst = (T*)destData;
-
-        for (unsigned int x = 0; x < mipWidth; x++)
-        {
-            T::average(&dst[x], &src[x * 2], &src[x * 2 + 1]);
-        }
-    }
-    else if (sourceWidth == 1)
-    {
-        ASSERT(sourceHeight != 1);
+inline void GenerateMip(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                        const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                        uint8_t *destData, size_t destRowPitch, size_t destDepthPitch);
 
-        for (unsigned int y = 0; y < mipHeight; y++)
-        {
-            const T *src0 = (const T*)(sourceData + y * 2 * sourcePitch);
-            const T *src1 = (const T*)(sourceData + y * 2 * sourcePitch + sourcePitch);
-            T *dst = (T*)(destData + y * destPitch);
-
-            T::average(dst, src0, src1);
-        }
-    }
-    else
-    {
-        for (unsigned int y = 0; y < mipHeight; y++)
-        {
-            const T *src0 = (const T*)(sourceData + y * 2 * sourcePitch);
-            const T *src1 = (const T*)(sourceData + y * 2 * sourcePitch + sourcePitch);
-            T *dst = (T*)(destData + y * destPitch);
-
-            for (unsigned int x = 0; x < mipWidth; x++)
-            {
-                T tmp0;
-                T tmp1;
-
-                T::average(&tmp0, &src0[x * 2], &src0[x * 2 + 1]);
-                T::average(&tmp1, &src1[x * 2], &src1[x * 2 + 1]);
-                T::average(&dst[x], &tmp0, &tmp1);
-            }
-        }
-    }
-}
 }
 
+#include "generatemip.inl"
+
 #endif // LIBGLESV2_RENDERER_GENERATEMIP_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.inl b/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.inl
new file mode 100644
index 0000000000..6788a42f03
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/generatemip.inl
@@ -0,0 +1,266 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// generatemip.inl: Defines the GenerateMip function, templated on the format
+// type of the image for which mip levels are being generated.
+
+#include "common/mathutil.h"
+
+namespace rx
+{
+
+namespace priv
+{
+
+template <typename T>
+static inline T *GetPixel(uint8_t *data, size_t x, size_t y, size_t z, size_t rowPitch, size_t depthPitch)
+{
+    return reinterpret_cast<T*>(data + (x * sizeof(T)) + (y * rowPitch) + (z * depthPitch));
+}
+
+template <typename T>
+static inline const T *GetPixel(const uint8_t *data, size_t x, size_t y, size_t z, size_t rowPitch, size_t depthPitch)
+{
+    return reinterpret_cast<const T*>(data + (x * sizeof(T)) + (y * rowPitch) + (z * depthPitch));
+}
+
+template <typename T>
+static void GenerateMip_Y(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                          const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                          size_t destWidth, size_t destHeight, size_t destDepth,
+                          uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth == 1);
+    ASSERT(sourceHeight > 1);
+    ASSERT(sourceDepth == 1);
+
+    for (size_t y = 0; y < destHeight; y++)
+    {
+        const T *src0 = GetPixel<T>(sourceData, 0, y * 2, 0, sourceRowPitch, sourceDepthPitch);
+        const T *src1 = GetPixel<T>(sourceData, 0, y * 2 + 1, 0, sourceRowPitch, sourceDepthPitch);
+        T *dst = GetPixel<T>(destData, 0, y, 0, destRowPitch, destDepthPitch);
+
+        T::average(dst, src0, src1);
+    }
+}
+
+template <typename T>
+static void GenerateMip_X(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                          const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                          size_t destWidth, size_t destHeight, size_t destDepth,
+                          uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth > 1);
+    ASSERT(sourceHeight == 1);
+    ASSERT(sourceDepth == 1);
+
+    for (size_t x = 0; x < destWidth; x++)
+    {
+        const T *src0 = GetPixel<T>(sourceData, x * 2, 0, 0, sourceRowPitch, sourceDepthPitch);
+        const T *src1 = GetPixel<T>(sourceData, x * 2 + 1, 0, 0, sourceRowPitch, sourceDepthPitch);
+        T *dst = GetPixel<T>(destData, x, 0, 0, destRowPitch, destDepthPitch);
+
+        T::average(dst, src0, src1);
+    }
+}
+
+template <typename T>
+static void GenerateMip_Z(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                          const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                          size_t destWidth, size_t destHeight, size_t destDepth,
+                          uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth == 1);
+    ASSERT(sourceHeight == 1);
+    ASSERT(sourceDepth > 1);
+
+    for (size_t z = 0; z < destDepth; z++)
+    {
+        const T *src0 = GetPixel<T>(sourceData, 0, 0, z * 2, sourceRowPitch, sourceDepthPitch);
+        const T *src1 = GetPixel<T>(sourceData, 0, 0, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+        T *dst = GetPixel<T>(destData, 0, 0, z, destRowPitch, destDepthPitch);
+
+        T::average(dst, src0, src1);
+    }
+}
+
+template <typename T>
+static void GenerateMip_XY(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                           const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                           size_t destWidth, size_t destHeight, size_t destDepth,
+                           uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth > 1);
+    ASSERT(sourceHeight > 1);
+    ASSERT(sourceDepth == 1);
+
+    for (size_t y = 0; y < destHeight; y++)
+    {
+        for (size_t x = 0; x < destWidth; x++)
+        {
+            const T *src0 = GetPixel<T>(sourceData, x * 2, y * 2, 0, sourceRowPitch, sourceDepthPitch);
+            const T *src1 = GetPixel<T>(sourceData, x * 2, y * 2 + 1, 0, sourceRowPitch, sourceDepthPitch);
+            const T *src2 = GetPixel<T>(sourceData, x * 2 + 1, y * 2, 0, sourceRowPitch, sourceDepthPitch);
+            const T *src3 = GetPixel<T>(sourceData, x * 2 + 1, y * 2 + 1, 0, sourceRowPitch, sourceDepthPitch);
+            T *dst = GetPixel<T>(destData, x, y, 0, destRowPitch, destDepthPitch);
+
+            T tmp0, tmp1;
+
+            T::average(&tmp0, src0, src1);
+            T::average(&tmp1, src2, src3);
+            T::average(dst, &tmp0, &tmp1);
+        }
+    }
+}
+
+template <typename T>
+static void GenerateMip_YZ(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                           const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                           size_t destWidth, size_t destHeight, size_t destDepth,
+                           uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth == 1);
+    ASSERT(sourceHeight > 1);
+    ASSERT(sourceDepth > 1);
+
+    for (size_t z = 0; z < destDepth; z++)
+    {
+        for (size_t y = 0; y < destHeight; y++)
+        {
+            const T *src0 = GetPixel<T>(sourceData, 0, y * 2, z * 2, sourceRowPitch, sourceDepthPitch);
+            const T *src1 = GetPixel<T>(sourceData, 0, y * 2, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+            const T *src2 = GetPixel<T>(sourceData, 0, y * 2 + 1, z * 2, sourceRowPitch, sourceDepthPitch);
+            const T *src3 = GetPixel<T>(sourceData, 0, y * 2 + 1, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+            T *dst = GetPixel<T>(destData, 0, y, z, destRowPitch, destDepthPitch);
+
+            T tmp0, tmp1;
+
+            T::average(&tmp0, src0, src1);
+            T::average(&tmp1, src2, src3);
+            T::average(dst, &tmp0, &tmp1);
+        }
+    }
+}
+
+template <typename T>
+static void GenerateMip_XZ(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                           const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                           size_t destWidth, size_t destHeight, size_t destDepth,
+                           uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth > 1);
+    ASSERT(sourceHeight == 1);
+    ASSERT(sourceDepth > 1);
+
+    for (size_t z = 0; z < destDepth; z++)
+    {
+        for (size_t x = 0; x < destWidth; x++)
+        {
+            const T *src0 = GetPixel<T>(sourceData, x * 2, 0, z * 2, sourceRowPitch, sourceDepthPitch);
+            const T *src1 = GetPixel<T>(sourceData, x * 2, 0, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+            const T *src2 = GetPixel<T>(sourceData, x * 2 + 1, 0, z * 2, sourceRowPitch, sourceDepthPitch);
+            const T *src3 = GetPixel<T>(sourceData, x * 2 + 1, 0, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+            T *dst = GetPixel<T>(destData, x, 0, z, destRowPitch, destDepthPitch);
+
+            T tmp0, tmp1;
+
+            T::average(&tmp0, src0, src1);
+            T::average(&tmp1, src2, src3);
+            T::average(dst, &tmp0, &tmp1);
+        }
+    }
+}
+
+template <typename T>
+static void GenerateMip_XYZ(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                            const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                            size_t destWidth, size_t destHeight, size_t destDepth,
+                            uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    ASSERT(sourceWidth > 1);
+    ASSERT(sourceHeight > 1);
+    ASSERT(sourceDepth > 1);
+
+    for (size_t z = 0; z < destDepth; z++)
+    {
+        for (size_t y = 0; y < destHeight; y++)
+        {
+            for (size_t x = 0; x < destWidth; x++)
+            {
+                const T *src0 = GetPixel<T>(sourceData, x * 2, y * 2, z * 2, sourceRowPitch, sourceDepthPitch);
+                const T *src1 = GetPixel<T>(sourceData, x * 2, y * 2, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+                const T *src2 = GetPixel<T>(sourceData, x * 2, y * 2 + 1, z * 2, sourceRowPitch, sourceDepthPitch);
+                const T *src3 = GetPixel<T>(sourceData, x * 2, y * 2 + 1, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+                const T *src4 = GetPixel<T>(sourceData, x * 2 + 1, y * 2, z * 2, sourceRowPitch, sourceDepthPitch);
+                const T *src5 = GetPixel<T>(sourceData, x * 2 + 1, y * 2, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+                const T *src6 = GetPixel<T>(sourceData, x * 2 + 1, y * 2 + 1, z * 2, sourceRowPitch, sourceDepthPitch);
+                const T *src7 = GetPixel<T>(sourceData, x * 2 + 1, y * 2 + 1, z * 2 + 1, sourceRowPitch, sourceDepthPitch);
+                T *dst = GetPixel<T>(destData, x, y, z, destRowPitch, destDepthPitch);
+
+                T tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+
+                T::average(&tmp0, src0, src1);
+                T::average(&tmp1, src2, src3);
+                T::average(&tmp2, src4, src5);
+                T::average(&tmp3, src6, src7);
+
+                T::average(&tmp4, &tmp0, &tmp1);
+                T::average(&tmp5, &tmp2, &tmp3);
+
+                T::average(dst, &tmp4, &tmp5);
+            }
+        }
+    }
+}
+
+
+typedef void (*MipGenerationFunction)(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                                      const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                                      size_t destWidth, size_t destHeight, size_t destDepth,
+                                      uint8_t *destData, size_t destRowPitch, size_t destDepthPitch);
+
+template <typename T>
+static MipGenerationFunction GetMipGenerationFunction(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth)
+{
+    uint8_t index = ((sourceWidth > 1)  ? 1 : 0) |
+                    ((sourceHeight > 1) ? 2 : 0) |
+                    ((sourceDepth > 1)  ? 4 : 0);
+
+    switch (index)
+    {
+      case 0: return NULL;
+      case 1: return GenerateMip_X<T>;   // W x 1 x 1
+      case 2: return GenerateMip_Y<T>;   // 1 x H x 1
+      case 3: return GenerateMip_XY<T>;  // W x H x 1
+      case 4: return GenerateMip_Z<T>;   // 1 x 1 x D
+      case 5: return GenerateMip_XZ<T>;  // W x 1 x D
+      case 6: return GenerateMip_YZ<T>;  // 1 x H x D
+      case 7: return GenerateMip_XYZ<T>; // W x H x D
+    }
+
+    UNREACHABLE();
+    return NULL;
+}
+
+}
+
+template <typename T>
+inline void GenerateMip(size_t sourceWidth, size_t sourceHeight, size_t sourceDepth,
+                        const uint8_t *sourceData, size_t sourceRowPitch, size_t sourceDepthPitch,
+                        uint8_t *destData, size_t destRowPitch, size_t destDepthPitch)
+{
+    size_t mipWidth = std::max<size_t>(1, sourceWidth >> 1);
+    size_t mipHeight = std::max<size_t>(1, sourceHeight >> 1);
+    size_t mipDepth = std::max<size_t>(1, sourceDepth >> 1);
+
+    priv::MipGenerationFunction generationFunction = priv::GetMipGenerationFunction<T>(sourceWidth, sourceHeight, sourceDepth);
+    ASSERT(generationFunction != NULL);
+
+    generationFunction(sourceWidth, sourceHeight, sourceDepth, sourceData, sourceRowPitch, sourceDepthPitch,
+                       mipWidth, mipHeight, mipDepth, destData, destRowPitch, destDepthPitch);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/imageformats.h b/src/3rdparty/angle/src/libGLESv2/renderer/imageformats.h
new file mode 100644
index 0000000000..2140a9ee72
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/imageformats.h
@@ -0,0 +1,2029 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// imageformats.h: Defines image format types with functions for mip generation
+// and copying.
+
+#ifndef LIBGLESV2_RENDERER_IMAGEFORMATS_H_
+#define LIBGLESV2_RENDERER_IMAGEFORMATS_H_
+
+#include "common/mathutil.h"
+
+namespace rx
+{
+
+// Several structures share functionality for reading, writing or mipmapping but the layout
+// must match the texture format which the structure represents. If collapsing or typedefing
+// structs in this header, make sure the functionality and memory layout is exactly the same.
+
+struct L8
+{
+    unsigned char L;
+
+    static void readColor(gl::ColorF *dst, const L8 *src)
+    {
+        const float lum = gl::normalizedToFloat(src->L);
+        dst->red   = lum;
+        dst->green = lum;
+        dst->blue  = lum;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(L8 *dst, const gl::ColorF *src)
+    {
+        dst->L = gl::floatToNormalized<unsigned char>((src->red + src->green + src->blue) / 3.0f);
+    }
+
+    static void average(L8 *dst, const L8 *src1, const L8 *src2)
+    {
+        dst->L = gl::average(src1->L, src2->L);
+    }
+};
+
+struct R8
+{
+    unsigned char R;
+
+    static void readColor(gl::ColorF *dst, const R8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+    }
+
+    static void writeColor(R8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+    }
+
+    static void average(R8 *dst, const R8 *src1, const R8 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct A8
+{
+    unsigned char A;
+
+    static void readColor(gl::ColorF *dst, const A8 *src)
+    {
+        dst->red   = 0.0f;
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void writeColor(A8 *dst, const gl::ColorF *src)
+    {
+        dst->A = gl::floatToNormalized<unsigned char>(src->alpha);
+    }
+
+    static void average(A8 *dst, const A8 *src1, const A8 *src2)
+    {
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct L8A8
+{
+    unsigned char L;
+    unsigned char A;
+
+    static void readColor(gl::ColorF *dst, const L8A8 *src)
+    {
+        const float lum = gl::normalizedToFloat(src->L);
+        dst->red   = lum;
+        dst->green = lum;
+        dst->blue  = lum;
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void writeColor(L8A8 *dst, const gl::ColorF *src)
+    {
+        dst->L = gl::floatToNormalized<unsigned char>((src->red + src->green + src->blue) / 3.0f);
+        dst->A = gl::floatToNormalized<unsigned char>(src->alpha);
+    }
+
+    static void average(L8A8 *dst, const L8A8 *src1, const L8A8 *src2)
+    {
+        *(unsigned short*)dst = (((*(unsigned short*)src1 ^ *(unsigned short*)src2) & 0xFEFE) >> 1) + (*(unsigned short*)src1 & *(unsigned short*)src2);
+    }
+};
+
+struct A8L8
+{
+    unsigned char A;
+    unsigned char L;
+
+    static void readColor(gl::ColorF *dst, const A8L8 *src)
+    {
+        const float lum = gl::normalizedToFloat(src->L);
+        dst->red   = lum;
+        dst->green = lum;
+        dst->blue  = lum;
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void writeColor(A8L8 *dst, const gl::ColorF *src)
+    {
+        dst->L = gl::floatToNormalized<unsigned char>((src->red + src->green + src->blue) / 3.0f);
+        dst->A = gl::floatToNormalized<unsigned char>(src->alpha);
+    }
+
+    static void average(A8L8 *dst, const A8L8 *src1, const A8L8 *src2)
+    {
+        *(unsigned short*)dst = (((*(unsigned short*)src1 ^ *(unsigned short*)src2) & 0xFEFE) >> 1) + (*(unsigned short*)src1 & *(unsigned short*)src2);
+    }
+};
+
+struct R8G8
+{
+    unsigned char R;
+    unsigned char G;
+
+    static void readColor(gl::ColorF *dst, const R8G8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R8G8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R8G8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+    }
+
+    static void writeColor(R8G8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+    }
+
+    static void average(R8G8 *dst, const R8G8 *src1, const R8G8 *src2)
+    {
+        *(unsigned short*)dst = (((*(unsigned short*)src1 ^ *(unsigned short*)src2) & 0xFEFE) >> 1) + (*(unsigned short*)src1 & *(unsigned short*)src2);
+    }
+};
+
+struct R8G8B8
+{
+    unsigned char R;
+    unsigned char G;
+    unsigned char B;
+
+    static void readColor(gl::ColorF *dst, const R8G8B8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R8G8B8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->G;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R8G8B8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<unsigned char>(src->blue);
+    }
+
+    static void writeColor(R8G8B8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+        dst->B = static_cast<unsigned char>(src->blue);
+    }
+
+    static void average(R8G8B8 *dst, const R8G8B8 *src1, const R8G8B8 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct B8G8R8
+{
+    unsigned char B;
+    unsigned char G;
+    unsigned char R;
+
+    static void readColor(gl::ColorF *dst, const B8G8R8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const B8G8R8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->G;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(B8G8R8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<unsigned char>(src->blue);
+    }
+
+    static void writeColor(B8G8R8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+        dst->B = static_cast<unsigned char>(src->blue);
+    }
+
+    static void average(B8G8R8 *dst, const B8G8R8 *src1, const B8G8R8 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R5G6B5
+{
+    unsigned short RGB;
+
+    static void readColor(gl::ColorF *dst, const R5G6B5 *src)
+    {
+        dst->red   = gl::normalizedToFloat<5>(gl::getShiftedData<5, 11>(src->RGB));
+        dst->green = gl::normalizedToFloat<6>(gl::getShiftedData<6,  5>(src->RGB));
+        dst->blue  = gl::normalizedToFloat<5>(gl::getShiftedData<5,  0>(src->RGB));
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R5G6B5 *dst, const gl::ColorF *src)
+    {
+        dst->RGB = gl::shiftData<5, 11>(gl::floatToNormalized<5, unsigned short>(src->red))   |
+                   gl::shiftData<6,  5>(gl::floatToNormalized<6, unsigned short>(src->green)) |
+                   gl::shiftData<5,  0>(gl::floatToNormalized<5, unsigned short>(src->blue));
+    }
+
+    static void average(R5G6B5 *dst, const R5G6B5 *src1, const R5G6B5 *src2)
+    {
+        dst->RGB = gl::shiftData<5, 11>(gl::average(gl::getShiftedData<5, 11>(src1->RGB), gl::getShiftedData<5, 11>(src2->RGB))) |
+                   gl::shiftData<6,  5>(gl::average(gl::getShiftedData<6,  5>(src1->RGB), gl::getShiftedData<6,  5>(src2->RGB))) |
+                   gl::shiftData<5,  0>(gl::average(gl::getShiftedData<5,  0>(src1->RGB), gl::getShiftedData<5,  0>(src2->RGB)));
+    }
+};
+
+struct A8R8G8B8
+{
+    unsigned char A;
+    unsigned char R;
+    unsigned char G;
+    unsigned char B;
+
+    static void readColor(gl::ColorF *dst, const A8R8G8B8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorUI *dst, const A8R8G8B8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(A8R8G8B8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<unsigned char>(src->blue);
+        dst->A = gl::floatToNormalized<unsigned char>(src->alpha);
+    }
+
+    static void writeColor(A8R8G8B8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+        dst->B = static_cast<unsigned char>(src->blue);
+        dst->A = static_cast<unsigned char>(src->alpha);
+    }
+
+    static void average(A8R8G8B8 *dst, const A8R8G8B8 *src1, const A8R8G8B8 *src2)
+    {
+        *(unsigned int*)dst = (((*(unsigned int*)src1 ^ *(unsigned int*)src2) & 0xFEFEFEFE) >> 1) + (*(unsigned int*)src1 & *(unsigned int*)src2);
+    }
+};
+
+struct R8G8B8A8
+{
+    unsigned char R;
+    unsigned char G;
+    unsigned char B;
+    unsigned char A;
+
+    static void readColor(gl::ColorF *dst, const R8G8B8A8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorUI *dst, const R8G8B8A8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R8G8B8A8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<unsigned char>(src->blue);
+        dst->A = gl::floatToNormalized<unsigned char>(src->alpha);
+    }
+
+    static void writeColor(R8G8B8A8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+        dst->B = static_cast<unsigned char>(src->blue);
+        dst->A = static_cast<unsigned char>(src->alpha);
+    }
+
+    static void average(R8G8B8A8 *dst, const R8G8B8A8 *src1, const R8G8B8A8 *src2)
+    {
+        *(unsigned int*)dst = (((*(unsigned int*)src1 ^ *(unsigned int*)src2) & 0xFEFEFEFE) >> 1) + (*(unsigned int*)src1 & *(unsigned int*)src2);
+    }
+};
+
+struct B8G8R8A8
+{
+    unsigned char B;
+    unsigned char G;
+    unsigned char R;
+    unsigned char A;
+
+    static void readColor(gl::ColorF *dst, const B8G8R8A8 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorUI *dst, const B8G8R8A8 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(B8G8R8A8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<unsigned char>(src->blue);
+        dst->A = gl::floatToNormalized<unsigned char>(src->alpha);
+    }
+
+    static void writeColor(B8G8R8A8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+        dst->B = static_cast<unsigned char>(src->blue);
+        dst->A = static_cast<unsigned char>(src->alpha);
+    }
+
+    static void average(B8G8R8A8 *dst, const B8G8R8A8 *src1, const B8G8R8A8 *src2)
+    {
+        *(unsigned int*)dst = (((*(unsigned int*)src1 ^ *(unsigned int*)src2) & 0xFEFEFEFE) >> 1) + (*(unsigned int*)src1 & *(unsigned int*)src2);
+    }
+};
+
+struct B8G8R8X8
+{
+    unsigned char B;
+    unsigned char G;
+    unsigned char R;
+    unsigned char X;
+
+    static void readColor(gl::ColorF *dst, const B8G8R8X8 *src)
+    {
+        dst->red = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const B8G8R8X8 *src)
+    {
+        dst->red = src->R;
+        dst->green = src->G;
+        dst->blue = src->B;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(B8G8R8X8 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<unsigned char>(src->blue);
+        dst->X = 255;
+    }
+
+    static void writeColor(B8G8R8X8 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned char>(src->red);
+        dst->G = static_cast<unsigned char>(src->green);
+        dst->B = static_cast<unsigned char>(src->blue);
+        dst->X = 255;
+    }
+
+    static void average(B8G8R8X8 *dst, const B8G8R8X8 *src1, const B8G8R8X8 *src2)
+    {
+        *(unsigned int*)dst = (((*(unsigned int*)src1 ^ *(unsigned int*)src2) & 0xFEFEFEFE) >> 1) + (*(unsigned int*)src1 & *(unsigned int*)src2);
+        dst->X = 255;
+    }
+};
+
+struct B5G5R5A1
+{
+    unsigned short BGRA;
+
+    static void readColor(gl::ColorF *dst, const B5G5R5A1 *src)
+    {
+        dst->alpha = gl::normalizedToFloat<1>(gl::getShiftedData<1, 15>(src->BGRA));
+        dst->red   = gl::normalizedToFloat<5>(gl::getShiftedData<5, 10>(src->BGRA));
+        dst->green = gl::normalizedToFloat<5>(gl::getShiftedData<5,  5>(src->BGRA));
+        dst->blue  = gl::normalizedToFloat<5>(gl::getShiftedData<5,  0>(src->BGRA));
+    }
+
+    static void writeColor(B5G5R5A1 *dst, const gl::ColorF *src)
+    {
+        dst->BGRA = gl::shiftData<1, 15>(gl::floatToNormalized<1, unsigned short>(src->alpha)) |
+                    gl::shiftData<5, 10>(gl::floatToNormalized<5, unsigned short>(src->red))   |
+                    gl::shiftData<5,  5>(gl::floatToNormalized<5, unsigned short>(src->green)) |
+                    gl::shiftData<5,  0>(gl::floatToNormalized<5, unsigned short>(src->blue));
+    }
+
+    static void average(B5G5R5A1 *dst, const B5G5R5A1 *src1, const B5G5R5A1 *src2)
+    {
+        dst->BGRA = gl::shiftData<1, 15>(gl::average(gl::getShiftedData<1, 15>(src1->BGRA), gl::getShiftedData<1, 15>(src2->BGRA))) |
+                    gl::shiftData<5, 10>(gl::average(gl::getShiftedData<5, 10>(src1->BGRA), gl::getShiftedData<5, 10>(src2->BGRA))) |
+                    gl::shiftData<5,  5>(gl::average(gl::getShiftedData<5,  5>(src1->BGRA), gl::getShiftedData<5,  5>(src2->BGRA))) |
+                    gl::shiftData<5,  0>(gl::average(gl::getShiftedData<5,  0>(src1->BGRA), gl::getShiftedData<5,  0>(src2->BGRA)));
+    }
+};
+
+struct R5G5B5A1
+{
+    unsigned short RGBA;
+
+    static void readColor(gl::ColorF *dst, const R5G5B5A1 *src)
+    {
+        dst->alpha = gl::normalizedToFloat<1>(gl::getShiftedData<1, 15>(src->RGBA));
+        dst->blue  = gl::normalizedToFloat<5>(gl::getShiftedData<5, 10>(src->RGBA));
+        dst->green = gl::normalizedToFloat<5>(gl::getShiftedData<5,  5>(src->RGBA));
+        dst->red   = gl::normalizedToFloat<5>(gl::getShiftedData<5,  0>(src->RGBA));
+    }
+
+    static void writeColor(R5G5B5A1 *dst, const gl::ColorF *src)
+    {
+        dst->RGBA = gl::shiftData<1, 15>(gl::floatToNormalized<1, unsigned short>(src->alpha)) |
+                    gl::shiftData<5, 10>(gl::floatToNormalized<5, unsigned short>(src->blue))  |
+                    gl::shiftData<5,  5>(gl::floatToNormalized<5, unsigned short>(src->green)) |
+                    gl::shiftData<5,  0>(gl::floatToNormalized<5, unsigned short>(src->red));
+    }
+
+    static void average(R5G5B5A1 *dst, const R5G5B5A1 *src1, const R5G5B5A1 *src2)
+    {
+        dst->RGBA = gl::shiftData<1, 15>(gl::average(gl::getShiftedData<1, 15>(src1->RGBA), gl::getShiftedData<1, 15>(src2->RGBA))) |
+                    gl::shiftData<5, 10>(gl::average(gl::getShiftedData<5, 10>(src1->RGBA), gl::getShiftedData<5, 10>(src2->RGBA))) |
+                    gl::shiftData<5,  5>(gl::average(gl::getShiftedData<5,  5>(src1->RGBA), gl::getShiftedData<5,  5>(src2->RGBA))) |
+                    gl::shiftData<5,  0>(gl::average(gl::getShiftedData<5,  0>(src1->RGBA), gl::getShiftedData<5,  0>(src2->RGBA)));
+    }
+};
+
+struct R4G4B4A4
+{
+    unsigned char R : 4;
+    unsigned char G : 4;
+    unsigned char B : 4;
+    unsigned char A : 4;
+
+    static void readColor(gl::ColorF *dst, const R4G4B4A4 *src)
+    {
+        dst->red   = gl::normalizedToFloat<4>(src->R);
+        dst->green = gl::normalizedToFloat<4>(src->G);
+        dst->blue  = gl::normalizedToFloat<4>(src->B);
+        dst->alpha = gl::normalizedToFloat<4>(src->A);
+    }
+
+    static void writeColor(R4G4B4A4 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<4, unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<4, unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<4, unsigned char>(src->blue);
+        dst->A = gl::floatToNormalized<4, unsigned char>(src->alpha);
+    }
+
+    static void average(R4G4B4A4 *dst, const R4G4B4A4 *src1, const R4G4B4A4 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct A4R4G4B4
+{
+    unsigned char A : 4;
+    unsigned char R : 4;
+    unsigned char G : 4;
+    unsigned char B : 4;
+
+    static void readColor(gl::ColorF *dst, const A4R4G4B4 *src)
+    {
+        dst->red   = gl::normalizedToFloat<4>(src->R);
+        dst->green = gl::normalizedToFloat<4>(src->G);
+        dst->blue  = gl::normalizedToFloat<4>(src->B);
+        dst->alpha = gl::normalizedToFloat<4>(src->A);
+    }
+
+    static void writeColor(A4R4G4B4 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<4, unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<4, unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<4, unsigned char>(src->blue);
+        dst->A = gl::floatToNormalized<4, unsigned char>(src->alpha);
+    }
+
+    static void average(A4R4G4B4 *dst, const A4R4G4B4 *src1, const A4R4G4B4 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct B4G4R4A4
+{
+    unsigned char B : 4;
+    unsigned char G : 4;
+    unsigned char R : 4;
+    unsigned char A : 4;
+
+    static void readColor(gl::ColorF *dst, const B4G4R4A4 *src)
+    {
+        dst->red   = gl::normalizedToFloat<4>(src->R);
+        dst->green = gl::normalizedToFloat<4>(src->G);
+        dst->blue  = gl::normalizedToFloat<4>(src->B);
+        dst->alpha = gl::normalizedToFloat<4>(src->A);
+    }
+
+    static void writeColor(B4G4R4A4 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<4, unsigned char>(src->red);
+        dst->G = gl::floatToNormalized<4, unsigned char>(src->green);
+        dst->B = gl::floatToNormalized<4, unsigned char>(src->blue);
+        dst->A = gl::floatToNormalized<4, unsigned char>(src->alpha);
+    }
+
+    static void average(B4G4R4A4 *dst, const B4G4R4A4 *src1, const B4G4R4A4 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R16
+{
+    unsigned short R;
+
+    static void readColor(gl::ColorF *dst, const R16 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R16 *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R16 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned short>(src->red);
+    }
+
+    static void writeColor(R16 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned short>(src->red);
+    }
+
+    static void average(R16 *dst, const R16 *src1, const R16 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct R16G16
+{
+    unsigned short R;
+    unsigned short G;
+
+    static void readColor(gl::ColorF *dst, const R16G16 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R16G16 *src)
+    {
+        dst->red = src->R;
+        dst->green = src->G;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R16G16 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned short>(src->red);
+        dst->G = gl::floatToNormalized<unsigned short>(src->green);
+    }
+
+    static void writeColor(R16G16 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned short>(src->red);
+        dst->G = static_cast<unsigned short>(src->green);
+    }
+
+    static void average(R16G16 *dst, const R16G16 *src1, const R16G16 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+    }
+};
+
+struct R16G16B16
+{
+    unsigned short R;
+    unsigned short G;
+    unsigned short B;
+
+    static void readColor(gl::ColorF *dst, const R16G16B16 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R16G16B16 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R16G16B16 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned short>(src->red);
+        dst->G = gl::floatToNormalized<unsigned short>(src->green);
+        dst->B = gl::floatToNormalized<unsigned short>(src->blue);
+    }
+
+    static void writeColor(R16G16B16 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned short>(src->red);
+        dst->G = static_cast<unsigned short>(src->green);
+        dst->B = static_cast<unsigned short>(src->blue);
+    }
+
+    static void average(R16G16B16 *dst, const R16G16B16 *src1, const R16G16B16 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R16G16B16A16
+{
+    unsigned short R;
+    unsigned short G;
+    unsigned short B;
+    unsigned short A;
+
+    static void readColor(gl::ColorF *dst, const R16G16B16A16 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorUI *dst, const R16G16B16A16 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R16G16B16A16 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned short>(src->red);
+        dst->G = gl::floatToNormalized<unsigned short>(src->green);
+        dst->B = gl::floatToNormalized<unsigned short>(src->blue);
+        dst->A = gl::floatToNormalized<unsigned short>(src->alpha);
+    }
+
+    static void writeColor(R16G16B16A16 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned short>(src->red);
+        dst->G = static_cast<unsigned short>(src->green);
+        dst->B = static_cast<unsigned short>(src->blue);
+        dst->A = static_cast<unsigned short>(src->alpha);
+    }
+
+    static void average(R16G16B16A16 *dst, const R16G16B16A16 *src1, const R16G16B16A16 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R32
+{
+    unsigned int R;
+
+    static void readColor(gl::ColorF *dst, const R32 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R32 *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R32 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned int>(src->red);
+    }
+
+    static void writeColor(R32 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned int>(src->red);
+    }
+
+    static void average(R32 *dst, const R32 *src1, const R32 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct R32G32
+{
+    unsigned int R;
+    unsigned int G;
+
+    static void readColor(gl::ColorF *dst, const R32G32 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R32G32 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R32G32 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned int>(src->red);
+        dst->G = gl::floatToNormalized<unsigned int>(src->green);
+    }
+
+    static void writeColor(R32G32 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned int>(src->red);
+        dst->G = static_cast<unsigned int>(src->green);
+    }
+
+    static void average(R32G32 *dst, const R32G32 *src1, const R32G32 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+    }
+};
+
+struct R32G32B32
+{
+    unsigned int R;
+    unsigned int G;
+    unsigned int B;
+
+    static void readColor(gl::ColorF *dst, const R32G32B32 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorUI *dst, const R32G32B32 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R32G32B32 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned int>(src->red);
+        dst->G = gl::floatToNormalized<unsigned int>(src->green);
+        dst->B = gl::floatToNormalized<unsigned int>(src->blue);
+    }
+
+    static void writeColor(R32G32B32 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned int>(src->red);
+        dst->G = static_cast<unsigned int>(src->green);
+        dst->B = static_cast<unsigned int>(src->blue);
+    }
+
+    static void average(R32G32B32 *dst, const R32G32B32 *src1, const R32G32B32 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R32G32B32A32
+{
+    unsigned int R;
+    unsigned int G;
+    unsigned int B;
+    unsigned int A;
+
+    static void readColor(gl::ColorF *dst, const R32G32B32A32 *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorUI *dst, const R32G32B32A32 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R32G32B32A32 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<unsigned int>(src->red);
+        dst->G = gl::floatToNormalized<unsigned int>(src->green);
+        dst->B = gl::floatToNormalized<unsigned int>(src->blue);
+        dst->A = gl::floatToNormalized<unsigned int>(src->alpha);
+    }
+
+    static void writeColor(R32G32B32A32 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned int>(src->red);
+        dst->G = static_cast<unsigned int>(src->green);
+        dst->B = static_cast<unsigned int>(src->blue);
+        dst->A = static_cast<unsigned int>(src->alpha);
+    }
+
+    static void average(R32G32B32A32 *dst, const R32G32B32A32 *src1, const R32G32B32A32 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R8S
+{
+    char R;
+
+    static void readColor(gl::ColorF *dst, const R8S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R8S *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R8S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<char>(src->red);
+    }
+
+    static void writeColor(R8S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<char>(src->red);
+    }
+
+    static void average(R8S *dst, const R8S *src1, const R8S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct R8G8S
+{
+    char R;
+    char G;
+
+    static void readColor(gl::ColorF *dst, const R8G8S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R8G8S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R8G8S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<char>(src->red);
+        dst->G = gl::floatToNormalized<char>(src->green);
+    }
+
+    static void writeColor(R8G8S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<char>(src->red);
+        dst->G = static_cast<char>(src->green);
+    }
+
+    static void average(R8G8S *dst, const R8G8S *src1, const R8G8S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+    }
+};
+
+struct R8G8B8S
+{
+    char R;
+    char G;
+    char B;
+
+    static void readColor(gl::ColorF *dst, const R8G8B8S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R8G8B8S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R8G8B8S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<char>(src->red);
+        dst->G = gl::floatToNormalized<char>(src->green);
+        dst->B = gl::floatToNormalized<char>(src->blue);
+    }
+
+    static void writeColor(R8G8B8S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<char>(src->red);
+        dst->G = static_cast<char>(src->green);
+        dst->B = static_cast<char>(src->blue);
+    }
+
+    static void average(R8G8B8S *dst, const R8G8B8S *src1, const R8G8B8S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R8G8B8A8S
+{
+    char R;
+    char G;
+    char B;
+    char A;
+
+    static void readColor(gl::ColorF *dst, const R8G8B8A8S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorI *dst, const R8G8B8A8S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R8G8B8A8S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<char>(src->red);
+        dst->G = gl::floatToNormalized<char>(src->green);
+        dst->B = gl::floatToNormalized<char>(src->blue);
+        dst->A = gl::floatToNormalized<char>(src->alpha);
+    }
+
+    static void writeColor(R8G8B8A8S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<char>(src->red);
+        dst->G = static_cast<char>(src->green);
+        dst->B = static_cast<char>(src->blue);
+        dst->A = static_cast<char>(src->alpha);
+    }
+
+    static void average(R8G8B8A8S *dst, const R8G8B8A8S *src1, const R8G8B8A8S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R16S
+{
+    short R;
+
+    static void readColor(gl::ColorF *dst, const R16S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R16S *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R16S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<short>(src->red);
+    }
+
+    static void writeColor(R16S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<short>(src->red);
+    }
+
+    static void average(R16S *dst, const R16S *src1, const R16S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct R16G16S
+{
+    short R;
+    short G;
+
+    static void readColor(gl::ColorF *dst, const R16G16S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R16G16S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R16G16S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<short>(src->red);
+        dst->G = gl::floatToNormalized<short>(src->green);
+    }
+
+    static void writeColor(R16G16S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<short>(src->red);
+        dst->G = static_cast<short>(src->green);
+    }
+
+    static void average(R16G16S *dst, const R16G16S *src1, const R16G16S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+    }
+};
+
+struct R16G16B16S
+{
+    short R;
+    short G;
+    short B;
+
+    static void readColor(gl::ColorF *dst, const R16G16B16S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R16G16B16S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R16G16B16S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<short>(src->red);
+        dst->G = gl::floatToNormalized<short>(src->green);
+        dst->B = gl::floatToNormalized<short>(src->blue);
+    }
+
+    static void writeColor(R16G16B16S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<short>(src->red);
+        dst->G = static_cast<short>(src->green);
+        dst->B = static_cast<short>(src->blue);
+    }
+
+    static void average(R16G16B16S *dst, const R16G16B16S *src1, const R16G16B16S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R16G16B16A16S
+{
+    short R;
+    short G;
+    short B;
+    short A;
+
+    static void readColor(gl::ColorF *dst, const R16G16B16A16S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorI *dst, const R16G16B16A16S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R16G16B16A16S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<short>(src->red);
+        dst->G = gl::floatToNormalized<short>(src->green);
+        dst->B = gl::floatToNormalized<short>(src->blue);
+        dst->A = gl::floatToNormalized<short>(src->alpha);
+    }
+
+    static void writeColor(R16G16B16A16S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<short>(src->red);
+        dst->G = static_cast<short>(src->green);
+        dst->B = static_cast<short>(src->blue);
+        dst->A = static_cast<short>(src->alpha);
+    }
+
+    static void average(R16G16B16A16S *dst, const R16G16B16A16S *src1, const R16G16B16A16S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R32S
+{
+    int R;
+
+    static void readColor(gl::ColorF *dst, const R32S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R32S *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R32S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<int>(src->red);
+    }
+
+    static void writeColor(R32S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<int>(src->red);
+    }
+
+    static void average(R32S *dst, const R32S *src1, const R32S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct R32G32S
+{
+    int R;
+    int G;
+
+    static void readColor(gl::ColorF *dst, const R32G32S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R32G32S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = 0;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R32G32S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<int>(src->red);
+        dst->G = gl::floatToNormalized<int>(src->green);
+    }
+
+    static void writeColor(R32G32S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<int>(src->red);
+        dst->G = static_cast<int>(src->green);
+    }
+
+    static void average(R32G32S *dst, const R32G32S *src1, const R32G32S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+    }
+};
+
+struct R32G32B32S
+{
+    int R;
+    int G;
+    int B;
+
+    static void readColor(gl::ColorF *dst, const R32G32B32S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void readColor(gl::ColorI *dst, const R32G32B32S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = 1;
+    }
+
+    static void writeColor(R32G32B32S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<int>(src->red);
+        dst->G = gl::floatToNormalized<int>(src->green);
+        dst->B = gl::floatToNormalized<int>(src->blue);
+    }
+
+    static void writeColor(R32G32B32S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<int>(src->red);
+        dst->G = static_cast<int>(src->green);
+        dst->B = static_cast<int>(src->blue);
+    }
+
+    static void average(R32G32B32S *dst, const R32G32B32S *src1, const R32G32B32S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R32G32B32A32S
+{
+    int R;
+    int G;
+    int B;
+    int A;
+
+    static void readColor(gl::ColorF *dst, const R32G32B32A32S *src)
+    {
+        dst->red   = gl::normalizedToFloat(src->R);
+        dst->green = gl::normalizedToFloat(src->G);
+        dst->blue  = gl::normalizedToFloat(src->B);
+        dst->alpha = gl::normalizedToFloat(src->A);
+    }
+
+    static void readColor(gl::ColorI *dst, const R32G32B32A32S *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R32G32B32A32S *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<int>(src->red);
+        dst->G = gl::floatToNormalized<int>(src->green);
+        dst->B = gl::floatToNormalized<int>(src->blue);
+        dst->A = gl::floatToNormalized<int>(src->alpha);
+    }
+
+    static void writeColor(R32G32B32A32S *dst, const gl::ColorI *src)
+    {
+        dst->R = static_cast<int>(src->red);
+        dst->G = static_cast<int>(src->green);
+        dst->B = static_cast<int>(src->blue);
+        dst->A = static_cast<int>(src->alpha);
+    }
+
+    static void average(R32G32B32A32S *dst, const R32G32B32A32S *src1, const R32G32B32A32S *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct A16B16G16R16F
+{
+    unsigned short A;
+    unsigned short R;
+    unsigned short G;
+    unsigned short B;
+
+    static void readColor(gl::ColorF *dst, const A16B16G16R16F *src)
+    {
+        dst->red   = gl::float16ToFloat32(src->R);
+        dst->green = gl::float16ToFloat32(src->G);
+        dst->blue  = gl::float16ToFloat32(src->B);
+        dst->alpha = gl::float16ToFloat32(src->A);
+    }
+
+    static void writeColor(A16B16G16R16F *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::float32ToFloat16(src->red);
+        dst->G = gl::float32ToFloat16(src->green);
+        dst->B = gl::float32ToFloat16(src->blue);
+        dst->A = gl::float32ToFloat16(src->alpha);
+    }
+
+    static void average(A16B16G16R16F *dst, const A16B16G16R16F *src1, const A16B16G16R16F *src2)
+    {
+        dst->R = gl::averageHalfFloat(src1->R, src2->R);
+        dst->G = gl::averageHalfFloat(src1->G, src2->G);
+        dst->B = gl::averageHalfFloat(src1->B, src2->B);
+        dst->A = gl::averageHalfFloat(src1->A, src2->A);
+    }
+};
+
+struct R16G16B16A16F
+{
+    unsigned short R;
+    unsigned short G;
+    unsigned short B;
+    unsigned short A;
+
+    static void readColor(gl::ColorF *dst, const R16G16B16A16F *src)
+    {
+        dst->red   = gl::float16ToFloat32(src->R);
+        dst->green = gl::float16ToFloat32(src->G);
+        dst->blue  = gl::float16ToFloat32(src->B);
+        dst->alpha = gl::float16ToFloat32(src->A);
+    }
+
+    static void writeColor(R16G16B16A16F *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::float32ToFloat16(src->red);
+        dst->G = gl::float32ToFloat16(src->green);
+        dst->B = gl::float32ToFloat16(src->blue);
+        dst->A = gl::float32ToFloat16(src->alpha);
+    }
+
+    static void average(R16G16B16A16F *dst, const R16G16B16A16F *src1, const R16G16B16A16F *src2)
+    {
+        dst->R = gl::averageHalfFloat(src1->R, src2->R);
+        dst->G = gl::averageHalfFloat(src1->G, src2->G);
+        dst->B = gl::averageHalfFloat(src1->B, src2->B);
+        dst->A = gl::averageHalfFloat(src1->A, src2->A);
+    }
+};
+
+struct R16F
+{
+    unsigned short R;
+
+    static void readColor(gl::ColorF *dst, const R16F *src)
+    {
+        dst->red   = gl::float16ToFloat32(src->R);
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R16F *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::float32ToFloat16(src->red);
+    }
+    
+    static void average(R16F *dst, const R16F *src1, const R16F *src2)
+    {
+        dst->R = gl::averageHalfFloat(src1->R, src2->R);
+    }
+};
+
+struct A16F
+{
+    unsigned short A;
+
+    static void readColor(gl::ColorF *dst, const A16F *src)
+    {
+        dst->red   = 0.0f;
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = gl::float16ToFloat32(src->A);
+    }
+
+    static void writeColor(A16F *dst, const gl::ColorF *src)
+    {
+        dst->A = gl::float32ToFloat16(src->alpha);
+    }
+
+    static void average(A16F *dst, const A16F *src1, const A16F *src2)
+    {
+        dst->A = gl::averageHalfFloat(src1->A, src2->A);
+    }
+};
+
+struct L16F
+{
+    unsigned short L;
+
+    static void readColor(gl::ColorF *dst, const L16F *src)
+    {
+        float lum = gl::float16ToFloat32(src->L);
+        dst->red   = lum;
+        dst->green = lum;
+        dst->blue  = lum;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(L16F *dst, const gl::ColorF *src)
+    {
+        dst->L = gl::float32ToFloat16((src->red + src->green + src->blue) / 3.0f);
+    }
+
+    static void average(L16F *dst, const L16F *src1, const L16F *src2)
+    {
+        dst->L = gl::averageHalfFloat(src1->L, src2->L);
+    }
+};
+
+struct L16A16F
+{
+    unsigned short L;
+    unsigned short A;
+
+    static void readColor(gl::ColorF *dst, const L16A16F *src)
+    {
+        float lum = gl::float16ToFloat32(src->L);
+        dst->red   = lum;
+        dst->green = lum;
+        dst->blue  = lum;
+        dst->alpha = gl::float16ToFloat32(src->A);
+    }
+
+    static void writeColor(L16A16F *dst, const gl::ColorF *src)
+    {
+        dst->L = gl::float32ToFloat16((src->red + src->green + src->blue) / 3.0f);
+        dst->A = gl::float32ToFloat16(src->alpha);
+    }
+
+    static void average(L16A16F *dst, const L16A16F *src1, const L16A16F *src2)
+    {
+        dst->L = gl::averageHalfFloat(src1->L, src2->L);
+        dst->A = gl::averageHalfFloat(src1->A, src2->A);
+    }
+};
+
+struct R16G16F
+{
+    unsigned short R;
+    unsigned short G;
+
+    static void readColor(gl::ColorF *dst, const R16G16F *src)
+    {
+        dst->red   = gl::float16ToFloat32(src->R);
+        dst->green = gl::float16ToFloat32(src->G);
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R16G16F *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::float32ToFloat16(src->red);
+        dst->G = gl::float32ToFloat16(src->green);
+    }
+
+    static void average(R16G16F *dst, const R16G16F *src1, const R16G16F *src2)
+    {
+        dst->R = gl::averageHalfFloat(src1->R, src2->R);
+        dst->G = gl::averageHalfFloat(src1->G, src2->G);
+    }
+};
+
+struct R16G16B16F
+{
+    unsigned short R;
+    unsigned short G;
+    unsigned short B;
+
+    static void readColor(gl::ColorF *dst, const R16G16B16F *src)
+    {
+        dst->red   = gl::float16ToFloat32(src->R);
+        dst->green = gl::float16ToFloat32(src->G);
+        dst->blue  = gl::float16ToFloat32(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R16G16B16F *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::float32ToFloat16(src->red);
+        dst->G = gl::float32ToFloat16(src->green);
+        dst->B = gl::float32ToFloat16(src->blue);
+    }
+
+    static void average(R16G16B16F *dst, const R16G16B16F *src1, const R16G16B16F *src2)
+    {
+        dst->R = gl::averageHalfFloat(src1->R, src2->R);
+        dst->G = gl::averageHalfFloat(src1->G, src2->G);
+        dst->B = gl::averageHalfFloat(src1->B, src2->B);
+    }
+};
+
+struct A32B32G32R32F
+{
+    float A;
+    float R;
+    float G;
+    float B;
+
+    static void readColor(gl::ColorF *dst, const A32B32G32R32F *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(A32B32G32R32F *dst, const gl::ColorF *src)
+    {
+        dst->R = src->red;
+        dst->G = src->green;
+        dst->B = src->blue;
+        dst->A = src->alpha;
+    }
+
+    static void average(A32B32G32R32F *dst, const A32B32G32R32F *src1, const A32B32G32R32F *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R32G32B32A32F
+{
+    float R;
+    float G;
+    float B;
+    float A;
+
+    static void readColor(gl::ColorF *dst, const R32G32B32A32F *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R32G32B32A32F *dst, const gl::ColorF *src)
+    {
+        dst->R = src->red;
+        dst->G = src->green;
+        dst->B = src->blue;
+        dst->A = src->alpha;
+    }
+
+    static void average(R32G32B32A32F *dst, const R32G32B32A32F *src1, const R32G32B32A32F *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R32F
+{
+    float R;
+
+    static void readColor(gl::ColorF *dst, const R32F *src)
+    {
+        dst->red   = src->R;
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R32F *dst, const gl::ColorF *src)
+    {
+        dst->R = src->red;
+    }
+
+    static void average(R32F *dst, const R32F *src1, const R32F *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+    }
+};
+
+struct A32F
+{
+    float A;
+
+    static void readColor(gl::ColorF *dst, const A32F *src)
+    {
+        dst->red   = 0.0f;
+        dst->green = 0.0f;
+        dst->blue  = 0.0f;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(A32F *dst, const gl::ColorF *src)
+    {
+        dst->A = src->alpha;
+    }
+
+    static void average(A32F *dst, const A32F *src1, const A32F *src2)
+    {
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct L32F
+{
+    float L;
+
+    static void readColor(gl::ColorF *dst, const L32F *src)
+    {
+        dst->red   = src->L;
+        dst->green = src->L;
+        dst->blue  = src->L;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(L32F *dst, const gl::ColorF *src)
+    {
+        dst->L = (src->red + src->green + src->blue) / 3.0f;
+    }
+
+    static void average(L32F *dst, const L32F *src1, const L32F *src2)
+    {
+        dst->L = gl::average(src1->L, src2->L);
+    }
+};
+
+struct L32A32F
+{
+    float L;
+    float A;
+
+    static void readColor(gl::ColorF *dst, const L32A32F *src)
+    {
+        dst->red   = src->L;
+        dst->green = src->L;
+        dst->blue  = src->L;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(L32A32F *dst, const gl::ColorF *src)
+    {
+        dst->L = (src->red + src->green + src->blue) / 3.0f;
+        dst->A = src->alpha;
+    }
+
+    static void average(L32A32F *dst, const L32A32F *src1, const L32A32F *src2)
+    {
+        dst->L = gl::average(src1->L, src2->L);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R32G32F
+{
+    float R;
+    float G;
+
+    static void readColor(gl::ColorF *dst, const R32G32F *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = 0.0f;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R32G32F *dst, const gl::ColorF *src)
+    {
+        dst->R = src->red;
+        dst->G = src->green;
+    }
+
+    static void average(R32G32F *dst, const R32G32F *src1, const R32G32F *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+    }
+};
+
+struct R32G32B32F
+{
+    float R;
+    float G;
+    float B;
+
+    static void readColor(gl::ColorF *dst, const R32G32B32F *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R32G32B32F *dst, const gl::ColorF *src)
+    {
+        dst->R = src->red;
+        dst->G = src->green;
+        dst->B = src->blue;
+    }
+
+    static void average(R32G32B32F *dst, const R32G32B32F *src1, const R32G32B32F *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+    }
+};
+
+struct R10G10B10A2
+{
+    unsigned int R : 10;
+    unsigned int G : 10;
+    unsigned int B : 10;
+    unsigned int A : 2;
+
+    static void readColor(gl::ColorF *dst, const R10G10B10A2 *src)
+    {
+        dst->red   = gl::normalizedToFloat<10>(src->R);
+        dst->green = gl::normalizedToFloat<10>(src->G);
+        dst->blue  = gl::normalizedToFloat<10>(src->B);
+        dst->alpha = gl::normalizedToFloat< 2>(src->A);
+    }
+
+    static void readColor(gl::ColorUI *dst, const R10G10B10A2 *src)
+    {
+        dst->red   = src->R;
+        dst->green = src->G;
+        dst->blue  = src->B;
+        dst->alpha = src->A;
+    }
+
+    static void writeColor(R10G10B10A2 *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::floatToNormalized<10, unsigned int>(src->red);
+        dst->G = gl::floatToNormalized<10, unsigned int>(src->green);
+        dst->B = gl::floatToNormalized<10, unsigned int>(src->blue);
+        dst->A = gl::floatToNormalized< 2, unsigned int>(src->alpha);
+    }
+
+    static void writeColor(R10G10B10A2 *dst, const gl::ColorUI *src)
+    {
+        dst->R = static_cast<unsigned int>(src->red);
+        dst->G = static_cast<unsigned int>(src->green);
+        dst->B = static_cast<unsigned int>(src->blue);
+        dst->A = static_cast<unsigned int>(src->alpha);
+    }
+
+    static void average(R10G10B10A2 *dst, const R10G10B10A2 *src1, const R10G10B10A2 *src2)
+    {
+        dst->R = gl::average(src1->R, src2->R);
+        dst->G = gl::average(src1->G, src2->G);
+        dst->B = gl::average(src1->B, src2->B);
+        dst->A = gl::average(src1->A, src2->A);
+    }
+};
+
+struct R9G9B9E5
+{
+    unsigned int R : 9;
+    unsigned int G : 9;
+    unsigned int B : 9;
+    unsigned int E : 5;
+
+    static void readColor(gl::ColorF *dst, const R9G9B9E5 *src)
+    {
+        gl::convert999E5toRGBFloats(gl::bitCast<unsigned int>(*src), &dst->red, &dst->green, &dst->blue);
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R9G9B9E5 *dst, const gl::ColorF *src)
+    {
+        *reinterpret_cast<unsigned int*>(dst) = gl::convertRGBFloatsTo999E5(src->red,
+                                                                            src->green,
+                                                                            src->blue);
+    }
+
+    static void average(R9G9B9E5 *dst, const R9G9B9E5 *src1, const R9G9B9E5 *src2)
+    {
+        float r1, g1, b1;
+        gl::convert999E5toRGBFloats(*reinterpret_cast<const unsigned int*>(src1), &r1, &g1, &b1);
+
+        float r2, g2, b2;
+        gl::convert999E5toRGBFloats(*reinterpret_cast<const unsigned int*>(src2), &r2, &g2, &b2);
+
+        *reinterpret_cast<unsigned int*>(dst) = gl::convertRGBFloatsTo999E5(gl::average(r1, r2),
+                                                                            gl::average(g1, g2),
+                                                                            gl::average(b1, b2));
+    }
+};
+
+struct R11G11B10F
+{
+    unsigned int R : 11;
+    unsigned int G : 11;
+    unsigned int B : 10;
+
+    static void readColor(gl::ColorF *dst, const R11G11B10F *src)
+    {
+        dst->red   = gl::float11ToFloat32(src->R);
+        dst->green = gl::float11ToFloat32(src->G);
+        dst->blue  = gl::float10ToFloat32(src->B);
+        dst->alpha = 1.0f;
+    }
+
+    static void writeColor(R11G11B10F *dst, const gl::ColorF *src)
+    {
+        dst->R = gl::float32ToFloat11(src->red);
+        dst->G = gl::float32ToFloat11(src->green);
+        dst->B = gl::float32ToFloat10(src->blue);
+    }
+
+    static void average(R11G11B10F *dst, const R11G11B10F *src1, const R11G11B10F *src2)
+    {
+        dst->R = gl::averageFloat11(src1->R, src2->R);
+        dst->G = gl::averageFloat11(src1->G, src2->G);
+        dst->B = gl::averageFloat10(src1->B, src2->B);
+    }
+};
+
+}
+
+#endif // LIBGLESV2_RENDERER_IMAGEFORMATS_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.cpp
new file mode 100644
index 0000000000..1986191a75
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.cpp
@@ -0,0 +1,661 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// loadimage.cpp: Defines image loading functions.
+
+#include "libGLESv2/renderer/loadimage.h"
+
+namespace rx
+{
+
+void LoadA8ToRGBA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = static_cast<uint32_t>(source[x]) << 24;
+            }
+        }
+    }
+}
+
+void LoadA8ToBGRA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    // Same as loading to RGBA
+    LoadA8ToRGBA8(width, height, depth, input, inputRowPitch, inputDepthPitch, output, outputRowPitch, outputDepthPitch);
+}
+
+void LoadA32FToRGBA32F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            float *dest = OffsetDataPointer<float>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = 0.0f;
+                dest[4 * x + 1] = 0.0f;
+                dest[4 * x + 2] = 0.0f;
+                dest[4 * x + 3] = source[x];
+            }
+        }
+    }
+}
+
+void LoadA16FToRGBA16F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint16_t *dest = OffsetDataPointer<uint16_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = 0;
+                dest[4 * x + 1] = 0;
+                dest[4 * x + 2] = 0;
+                dest[4 * x + 3] = source[x];
+            }
+        }
+    }
+}
+
+void LoadL8ToRGBA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[x];
+                dest[4 * x + 1] = source[x];
+                dest[4 * x + 2] = source[x];
+                dest[4 * x + 3] = 0xFF;
+            }
+        }
+    }
+}
+
+void LoadL8ToBGRA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    // Same as loading to RGBA
+    LoadL8ToRGBA8(width, height, depth, input, inputRowPitch, inputDepthPitch, output, outputRowPitch, outputDepthPitch);
+}
+
+void LoadL32FToRGBA32F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            float *dest = OffsetDataPointer<float>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[x];
+                dest[4 * x + 1] = source[x];
+                dest[4 * x + 2] = source[x];
+                dest[4 * x + 3] = 1.0f;
+            }
+        }
+    }
+}
+
+void LoadL16FToRGBA16F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint16_t *dest = OffsetDataPointer<uint16_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[x];
+                dest[4 * x + 1] = source[x];
+                dest[4 * x + 2] = source[x];
+                dest[4 * x + 3] = gl::Float16One;
+            }
+        }
+    }
+}
+
+void LoadLA8ToRGBA8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[2 * x + 0];
+                dest[4 * x + 1] = source[2 * x + 0];
+                dest[4 * x + 2] = source[2 * x + 0];
+                dest[4 * x + 3] = source[2 * x + 1];
+            }
+        }
+    }
+}
+
+void LoadLA8ToBGRA8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    // Same as loading to RGBA
+    LoadLA8ToRGBA8(width, height, depth, input, inputRowPitch, inputDepthPitch, output, outputRowPitch, outputDepthPitch);
+}
+
+void LoadLA32FToRGBA32F(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            float *dest = OffsetDataPointer<float>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[2 * x + 0];
+                dest[4 * x + 1] = source[2 * x + 0];
+                dest[4 * x + 2] = source[2 * x + 0];
+                dest[4 * x + 3] = source[2 * x + 1];
+            }
+        }
+    }
+}
+
+void LoadLA16FToRGBA16F(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint16_t *dest = OffsetDataPointer<uint16_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[2 * x + 0];
+                dest[4 * x + 1] = source[2 * x + 0];
+                dest[4 * x + 2] = source[2 * x + 0];
+                dest[4 * x + 3] = source[2 * x + 1];
+            }
+        }
+    }
+}
+
+void LoadRGB8ToBGRX8(size_t width, size_t height, size_t depth,
+                     const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                     uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = source[x * 3 + 2];
+                dest[4 * x + 1] = source[x * 3 + 1];
+                dest[4 * x + 2] = source[x * 3 + 0];
+                dest[4 * x + 3] = 0xFF;
+            }
+        }
+    }
+}
+
+void LoadRG8ToBGRX8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = 0x00;
+                dest[4 * x + 1] = source[x * 2 + 1];
+                dest[4 * x + 2] = source[x * 2 + 0];
+                dest[4 * x + 3] = 0xFF;
+            }
+        }
+    }
+}
+
+void LoadR8ToBGRX8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[4 * x + 0] = 0x00;
+                dest[4 * x + 1] = 0x00;
+                dest[4 * x + 2] = source[x];
+                dest[4 * x + 3] = 0xFF;
+            }
+        }
+    }
+}
+
+void LoadR5G6B5ToBGRA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t rgb = source[x];
+                dest[4 * x + 0] = ((rgb & 0x001F) << 3) | ((rgb & 0x001F) >> 2);
+                dest[4 * x + 1] = ((rgb & 0x07E0) >> 3) | ((rgb & 0x07E0) >> 9);
+                dest[4 * x + 2] = ((rgb & 0xF800) >> 8) | ((rgb & 0xF800) >> 13);
+                dest[4 * x + 3] = 0xFF;
+            }
+        }
+    }
+}
+
+void LoadR5G6B5ToRGBA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t rgb = source[x];
+                dest[4 * x + 0] = ((rgb & 0xF800) >> 8) | ((rgb & 0xF800) >> 13);
+                dest[4 * x + 1] = ((rgb & 0x07E0) >> 3) | ((rgb & 0x07E0) >> 9);
+                dest[4 * x + 2] = ((rgb & 0x001F) << 3) | ((rgb & 0x001F) >> 2);
+                dest[4 * x + 3] = 0xFF;
+            }
+        }
+    }
+}
+
+void LoadRGBA8ToBGRA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint32_t *source = OffsetDataPointer<uint32_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint32_t rgba = source[x];
+                dest[x] = (_rotl(rgba, 16) & 0x00ff00ff) | (rgba & 0xff00ff00);
+            }
+        }
+    }
+}
+
+void LoadRGBA4ToBGRA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t rgba = source[x];
+                dest[4 * x + 0] = ((rgba & 0x00F0) << 0) | ((rgba & 0x00F0) >> 4);
+                dest[4 * x + 1] = ((rgba & 0x0F00) >> 4) | ((rgba & 0x0F00) >> 8);
+                dest[4 * x + 2] = ((rgba & 0xF000) >> 8) | ((rgba & 0xF000) >> 12);
+                dest[4 * x + 3] = ((rgba & 0x000F) << 4) | ((rgba & 0x000F) >> 0);
+            }
+        }
+    }
+}
+
+void LoadRGBA4ToRGBA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t rgba = source[x];
+                dest[4 * x + 0] = ((rgba & 0xF000) >> 8) | ((rgba & 0xF000) >> 12);
+                dest[4 * x + 1] = ((rgba & 0x0F00) >> 4) | ((rgba & 0x0F00) >> 8);
+                dest[4 * x + 2] = ((rgba & 0x00F0) << 0) | ((rgba & 0x00F0) >> 4);
+                dest[4 * x + 3] = ((rgba & 0x000F) << 4) | ((rgba & 0x000F) >> 0);
+            }
+        }
+    }
+}
+
+void LoadBGRA4ToBGRA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t bgra = source[x];
+                dest[4 * x + 0] = ((bgra & 0xF000) >> 8) | ((bgra & 0xF000) >> 12);
+                dest[4 * x + 1] = ((bgra & 0x0F00) >> 4) | ((bgra & 0x0F00) >> 8);
+                dest[4 * x + 2] = ((bgra & 0x00F0) << 0) | ((bgra & 0x00F0) >> 4);
+                dest[4 * x + 3] = ((bgra & 0x000F) << 4) | ((bgra & 0x000F) >> 0);
+            }
+        }
+    }
+}
+
+void LoadRGB5A1ToBGRA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t rgba = source[x];
+                dest[4 * x + 0] = ((rgba & 0x003E) << 2) | ((rgba & 0x003E) >> 3);
+                dest[4 * x + 1] = ((rgba & 0x07C0) >> 3) | ((rgba & 0x07C0) >> 8);
+                dest[4 * x + 2] = ((rgba & 0xF800) >> 8) | ((rgba & 0xF800) >> 13);
+                dest[4 * x + 3] = (rgba & 0x0001) ? 0xFF : 0;
+            }
+        }
+    }
+}
+
+void LoadRGB5A1ToRGBA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t rgba = source[x];
+                dest[4 * x + 0] = ((rgba & 0xF800) >> 8) | ((rgba & 0xF800) >> 13);
+                dest[4 * x + 1] = ((rgba & 0x07C0) >> 3) | ((rgba & 0x07C0) >> 8);
+                dest[4 * x + 2] = ((rgba & 0x003E) << 2) | ((rgba & 0x003E) >> 3);
+                dest[4 * x + 3] = (rgba & 0x0001) ? 0xFF : 0;
+            }
+        }
+    }
+}
+
+
+void LoadBGR5A1ToBGRA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint16_t bgra = source[x];
+                dest[4 * x + 0] = ((bgra & 0xF800) >> 8) | ((bgra & 0xF800) >> 13);
+                dest[4 * x + 1] = ((bgra & 0x07C0) >> 3) | ((bgra & 0x07C0) >> 8);
+                dest[4 * x + 2] = ((bgra & 0x003E) << 2) | ((bgra & 0x003E) >> 3);
+                dest[4 * x + 3] = (bgra & 0x0001) ? 0xFF : 0;
+            }
+        }
+    }
+}
+
+void LoadRGB10A2ToRGBA8(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint32_t *source = OffsetDataPointer<uint32_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint32_t rgba = source[x];
+                dest[4 * x + 0] = (rgba & 0x000003FF) >>  2;
+                dest[4 * x + 1] = (rgba & 0x000FFC00) >> 12;
+                dest[4 * x + 2] = (rgba & 0x3FF00000) >> 22;
+                dest[4 * x + 3] = ((rgba & 0xC0000000) >> 30) * 0x55;
+            }
+        }
+    }
+}
+
+void LoadRGB16FToRGB9E5(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = gl::convertRGBFloatsTo999E5(gl::float16ToFloat32(source[x * 3 + 0]),
+                                                      gl::float16ToFloat32(source[x * 3 + 1]),
+                                                      gl::float16ToFloat32(source[x * 3 + 2]));
+            }
+        }
+    }
+}
+
+void LoadRGB32FToRGB9E5(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = gl::convertRGBFloatsTo999E5(source[x * 3 + 0], source[x * 3 + 1], source[x * 3 + 2]);
+            }
+        }
+    }
+}
+
+void LoadRGB16FToRG11B10F(size_t width, size_t height, size_t depth,
+                          const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                          uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint16_t *source = OffsetDataPointer<uint16_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = (gl::float32ToFloat11(gl::float16ToFloat32(source[x * 3 + 0])) <<  0) |
+                          (gl::float32ToFloat11(gl::float16ToFloat32(source[x * 3 + 1])) << 11) |
+                          (gl::float32ToFloat10(gl::float16ToFloat32(source[x * 3 + 2])) << 22);
+            }
+        }
+    }
+}
+
+void LoadRGB32FToRG11B10F(size_t width, size_t height, size_t depth,
+                          const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                          uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = (gl::float32ToFloat11(source[x * 3 + 0]) <<  0) |
+                          (gl::float32ToFloat11(source[x * 3 + 1]) << 11) |
+                          (gl::float32ToFloat10(source[x * 3 + 2]) << 22);
+            }
+        }
+    }
+}
+
+void LoadG8R24ToR24G8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint32_t *source = OffsetDataPointer<uint32_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                uint32_t d = source[x] >> 8;
+                uint8_t  s = source[x] & 0xFF;
+                dest[x] = d | (s << 24);
+            }
+        }
+    }
+}
+
+void LoadRGB32FToRGBA16F(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint16_t *dest = OffsetDataPointer<uint16_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x * 4 + 0] = gl::float32ToFloat16(source[x * 3 + 0]);
+                dest[x * 4 + 1] = gl::float32ToFloat16(source[x * 3 + 1]);
+                dest[x * 4 + 2] = gl::float32ToFloat16(source[x * 3 + 2]);
+                dest[x * 4 + 3] = gl::Float16One;
+            }
+        }
+    }
+}
+
+void LoadR32ToR16(size_t width, size_t height, size_t depth,
+                  const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                  uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint32_t *source = OffsetDataPointer<uint32_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint16_t *dest = OffsetDataPointer<uint16_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = source[x] >> 16;
+            }
+        }
+    }
+}
+
+void LoadR32ToR24G8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint32_t *source = OffsetDataPointer<uint32_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x] = source[x] >> 8;
+            }
+        }
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.h b/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.h
new file mode 100644
index 0000000000..bcdff24a66
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.h
@@ -0,0 +1,193 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// loadimage.h: Defines image loading functions
+
+#ifndef LIBGLESV2_RENDERER_LOADIMAGE_H_
+#define LIBGLESV2_RENDERER_LOADIMAGE_H_
+
+#include "libGLESv2/angletypes.h"
+
+#include <cstdint>
+
+namespace rx
+{
+
+void LoadA8ToRGBA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadA8ToBGRA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadA32FToRGBA32F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadA16FToRGBA16F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadL8ToRGBA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadL8ToBGRA8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadL32FToRGBA32F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadL16FToRGBA16F(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadLA8ToRGBA8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadLA8ToBGRA8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadLA32FToRGBA32F(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadLA16FToRGBA16F(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB8ToBGRX8(size_t width, size_t height, size_t depth,
+                     const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                     uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRG8ToBGRX8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadR8ToBGRX8(size_t width, size_t height, size_t depth,
+                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadR5G6B5ToBGRA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadR5G6B5ToRGBA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGBA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+                           const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                           uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGBA8ToBGRA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGBA4ToBGRA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGBA4ToRGBA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadBGRA4ToBGRA8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB5A1ToBGRA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB5A1ToRGBA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadBGR5A1ToBGRA8(size_t width, size_t height, size_t depth,
+                       const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                       uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB10A2ToRGBA8(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB16FToRGB9E5(size_t width, size_t height, size_t depth,
+                          const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                          uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB32FToRGB9E5(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB16FToRG11B10F(size_t width, size_t height, size_t depth,
+                          const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                          uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB32FToRG11B10F(size_t width, size_t height, size_t depth,
+                          const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                          uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadG8R24ToR24G8(size_t width, size_t height, size_t depth,
+                      const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                      uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+template <typename type, size_t componentCount>
+inline void LoadToNative(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+template <typename type, uint32_t fourthComponentBits>
+inline void LoadToNative3To4(size_t width, size_t height, size_t depth,
+                             const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                             uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+template <size_t componentCount>
+inline void Load32FTo16F(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadRGB32FToRGBA16F(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+template <size_t blockWidth, size_t blockHeight, size_t blockSize>
+inline void LoadCompressedToNative(size_t width, size_t height, size_t depth,
+                                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadR32ToR16(size_t width, size_t height, size_t depth,
+                  const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                  uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+template <typename type, uint32_t firstBits, uint32_t secondBits, uint32_t thirdBits, uint32_t fourthBits>
+inline void Initialize4ComponentData(size_t width, size_t height, size_t depth,
+                                     uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+void LoadR32ToR24G8(size_t width, size_t height, size_t depth,
+                    const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                    uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch);
+
+template <typename T>
+inline T *OffsetDataPointer(uint8_t *data, size_t y, size_t z, size_t rowPitch, size_t depthPitch);
+
+template <typename T>
+inline const T *OffsetDataPointer(const uint8_t *data, size_t y, size_t z, size_t rowPitch, size_t depthPitch);
+
+}
+
+#include "loadimage.inl"
+
+#endif // LIBGLESV2_RENDERER_LOADIMAGE_H_
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.inl b/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.inl
new file mode 100644
index 0000000000..abd0a3673c
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/loadimage.inl
@@ -0,0 +1,156 @@
+//
+// Copyright (c) 2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+#include "common/mathutil.h"
+
+namespace rx
+{
+
+template <typename T>
+inline T *OffsetDataPointer(uint8_t *data, size_t y, size_t z, size_t rowPitch, size_t depthPitch)
+{
+    return reinterpret_cast<T*>(data + (y * rowPitch) + (z * depthPitch));
+}
+
+template <typename T>
+inline const T *OffsetDataPointer(const uint8_t *data, size_t y, size_t z, size_t rowPitch, size_t depthPitch)
+{
+    return reinterpret_cast<const T*>(data + (y * rowPitch) + (z * depthPitch));
+}
+
+template <typename type, size_t componentCount>
+inline void LoadToNative(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    const size_t rowSize = width * sizeof(type) * componentCount;
+    const size_t layerSize = rowSize * height;
+    const size_t imageSize = layerSize * depth;
+
+    if (layerSize == inputDepthPitch && layerSize == outputDepthPitch)
+    {
+        ASSERT(rowSize == inputRowPitch && rowSize == outputRowPitch);
+        memcpy(output, input, imageSize);
+    }
+    else if (rowSize == inputRowPitch && rowSize == outputRowPitch)
+    {
+        for (size_t z = 0; z < depth; z++)
+        {
+            const type *source = OffsetDataPointer<type>(input, 0, z, inputRowPitch, inputDepthPitch);
+            type *dest = OffsetDataPointer<type>(output, 0, z, outputRowPitch, outputDepthPitch);
+
+            memcpy(dest, source, layerSize);
+        }
+    }
+    else
+    {
+        for (size_t z = 0; z < depth; z++)
+        {
+            for (size_t y = 0; y < height; y++)
+            {
+                const type *source = OffsetDataPointer<type>(input, y, z, inputRowPitch, inputDepthPitch);
+                type *dest = OffsetDataPointer<type>(output, y, z, outputRowPitch, outputDepthPitch);
+                memcpy(dest, source, width * sizeof(type) * componentCount);
+            }
+        }
+    }
+}
+
+template <typename type, uint32_t fourthComponentBits>
+inline void LoadToNative3To4(size_t width, size_t height, size_t depth,
+                             const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                             uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    const type fourthValue = gl::bitCast<type>(fourthComponentBits);
+
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const type *source = OffsetDataPointer<type>(input, y, z, inputRowPitch, inputDepthPitch);
+            type *dest = OffsetDataPointer<type>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                dest[x * 4 + 0] = source[x * 3 + 0];
+                dest[x * 4 + 1] = source[x * 3 + 1];
+                dest[x * 4 + 2] = source[x * 3 + 2];
+                dest[x * 4 + 3] = fourthValue;
+            }
+        }
+    }
+}
+
+template <size_t componentCount>
+inline void Load32FTo16F(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    const size_t elementWidth = componentCount * width;
+
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const float *source = OffsetDataPointer<float>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint16_t *dest = OffsetDataPointer<uint16_t>(output, y, z, outputRowPitch, outputDepthPitch);
+
+            for (size_t x = 0; x < elementWidth; x++)
+            {
+                dest[x] = gl::float32ToFloat16(source[x]);
+            }
+        }
+    }
+}
+
+template <size_t blockWidth, size_t blockHeight, size_t blockSize>
+inline void LoadCompressedToNative(size_t width, size_t height, size_t depth,
+                                   const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                                   uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    const size_t columns = (width + (blockWidth - 1)) / blockWidth;
+    const size_t rows = (height + (blockHeight - 1)) / blockHeight;
+
+    for (size_t z = 0; z < depth; ++z)
+    {
+        for (size_t y = 0; y < rows; ++y)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint8_t *dest = OffsetDataPointer<uint8_t>(output, y, z, outputRowPitch, outputDepthPitch);
+            memcpy(dest, source, columns * blockSize);
+        }
+    }
+}
+
+template <typename type, uint32_t firstBits, uint32_t secondBits, uint32_t thirdBits, uint32_t fourthBits>
+inline void Initialize4ComponentData(size_t width, size_t height, size_t depth,
+                                     uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+    type writeValues[4] =
+    {
+        gl::bitCast<type>(firstBits),
+        gl::bitCast<type>(secondBits),
+        gl::bitCast<type>(thirdBits),
+        gl::bitCast<type>(fourthBits),
+    };
+
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            type *destRow = OffsetDataPointer<type>(output, y, z, outputRowPitch, outputDepthPitch);
+            for (size_t x = 0; x < width; x++)
+            {
+                type* destPixel = destRow + x * 4;
+
+                // This could potentially be optimized by generating an entire row of initialization
+                // data and copying row by row instead of pixel by pixel.
+                memcpy(destPixel, writeValues, sizeof(type) * 4);
+            }
+        }
+    }
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp
new file mode 100644
index 0000000000..f777b30be6
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp
@@ -0,0 +1,112 @@
+//
+// Copyright (c) 2002-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// loadimageSSE2.cpp: Defines image loading functions. It's
+// in a separated file for GCC, which can enable SSE usage only per-file,
+// not for code blocks that use SSE2 explicitly.
+
+#include "libGLESv2/renderer/loadimage.h"
+
+#if !defined(__SSE2__) && (defined(_M_X64) || _M_IX86_FP == 2)
+#define __SSE2__
+#endif
+
+namespace rx
+{
+
+void LoadA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+                        const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                        uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+#ifdef __SSE2__
+    __m128i zeroWide = _mm_setzero_si128();
+
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint8_t *source = OffsetDataPointer<uint8_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+
+            size_t x = 0;
+
+            // Make output writes aligned
+            for (; ((reinterpret_cast<intptr_t>(&dest[x]) & 0xF) != 0 && x < width); x++)
+            {
+                dest[x] = static_cast<uint32_t>(source[x]) << 24;
+            }
+
+            for (; x + 7 < width; x += 8)
+            {
+                __m128i sourceData = _mm_loadl_epi64(reinterpret_cast<const __m128i*>(&source[x]));
+                // Interleave each byte to 16bit, make the lower byte to zero
+                sourceData = _mm_unpacklo_epi8(zeroWide, sourceData);
+                // Interleave each 16bit to 32bit, make the lower 16bit to zero
+                __m128i lo = _mm_unpacklo_epi16(zeroWide, sourceData);
+                __m128i hi = _mm_unpackhi_epi16(zeroWide, sourceData);
+
+                _mm_store_si128(reinterpret_cast<__m128i*>(&dest[x]), lo);
+                _mm_store_si128(reinterpret_cast<__m128i*>(&dest[x + 4]), hi);
+            }
+
+            // Handle the remainder
+            for (; x < width; x++)
+            {
+                dest[x] = static_cast<uint32_t>(source[x]) << 24;
+            }
+        }
+    }
+#endif
+}
+
+void LoadRGBA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+                           const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                           uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+{
+#ifdef __SSE2__
+    __m128i brMask = _mm_set1_epi32(0x00ff00ff);
+
+    for (size_t z = 0; z < depth; z++)
+    {
+        for (size_t y = 0; y < height; y++)
+        {
+            const uint32_t *source = OffsetDataPointer<uint32_t>(input, y, z, inputRowPitch, inputDepthPitch);
+            uint32_t *dest = OffsetDataPointer<uint32_t>(output, y, z, outputRowPitch, outputDepthPitch);
+
+            size_t x = 0;
+
+            // Make output writes aligned
+            for (; ((reinterpret_cast<intptr_t>(&dest[x]) & 15) != 0) && x < width; x++)
+            {
+                uint32_t rgba = source[x];
+                dest[x] = (_rotl(rgba, 16) & 0x00ff00ff) | (rgba & 0xff00ff00);
+            }
+
+            for (; x + 3 < width; x += 4)
+            {
+                __m128i sourceData = _mm_loadu_si128(reinterpret_cast<const __m128i*>(&source[x]));
+                // Mask out g and a, which don't change
+                __m128i gaComponents = _mm_andnot_si128(brMask, sourceData);
+                // Mask out b and r
+                __m128i brComponents = _mm_and_si128(sourceData, brMask);
+                // Swap b and r
+                __m128i brSwapped = _mm_shufflehi_epi16(_mm_shufflelo_epi16(brComponents, _MM_SHUFFLE(2, 3, 0, 1)), _MM_SHUFFLE(2, 3, 0, 1));
+                __m128i result = _mm_or_si128(gaComponents, brSwapped);
+                _mm_store_si128(reinterpret_cast<__m128i*>(&dest[x]), result);
+            }
+
+            // Perform leftover writes
+            for (; x < width; x++)
+            {
+                uint32_t rgba = source[x];
+                dest[x] = (_rotl(rgba, 16) & 0x00ff00ff) | (rgba & 0xff00ff00);
+            }
+        }
+    }
+#endif
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/vertexconversion.h b/src/3rdparty/angle/src/libGLESv2/renderer/vertexconversion.h
index 590b9d48a3..81ba8a0767 100644
--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/vertexconversion.h
+++ b/src/3rdparty/angle/src/libGLESv2/renderer/vertexconversion.h
@@ -10,6 +10,10 @@
 #ifndef LIBGLESV2_VERTEXCONVERSION_H_
 #define LIBGLESV2_VERTEXCONVERSION_H_
 
+#include <limits>
+#include <cstdint>
+#include <cstddef>
+
 namespace rx
 {
 
@@ -154,11 +158,13 @@ struct VertexDataConverter
     static const bool identity = (WidenRule::initialWidth == WidenRule::finalWidth) && Converter::identity;
     static const std::size_t finalSize = WidenRule::finalWidth * sizeof(OutputType);
 
-    static void convertArray(const InputType *in, std::size_t stride, std::size_t n, OutputType *out)
+    static void convertArray(const uint8_t *input, size_t stride, size_t n, uint8_t *output)
     {
+        OutputType *out = reinterpret_cast<OutputType*>(output);
+
         for (std::size_t i = 0; i < n; i++)
         {
-            const InputType *ein = pointerAddBytes(in, i * stride);
+            const InputType *ein = reinterpret_cast<const InputType*>(input + i * stride);
 
             copyComponent(out, ein, 0, static_cast<OutputType>(DefaultValueRule::zero()));
             copyComponent(out, ein, 1, static_cast<OutputType>(DefaultValueRule::zero()));
@@ -169,19 +175,7 @@ struct VertexDataConverter
         }
     }
 
-    static void convertArray(const void *in, std::size_t stride, std::size_t n, void *out)
-    {
-        return convertArray(static_cast<const InputType*>(in), stride, n, static_cast<OutputType*>(out));
-    }
-
   private:
-    // Advance the given pointer by a number of bytes (not pointed-to elements).
-    template <class T>
-    static T *pointerAddBytes(T *basePtr, std::size_t numBytes)
-    {
-        return reinterpret_cast<T *>(reinterpret_cast<uintptr_t>(basePtr) + numBytes);
-    }
-
     static void copyComponent(OutputType *out, const InputType *in, std::size_t elementindex, OutputType defaultvalue)
     {
         if (WidenRule::finalWidth > elementindex)
diff --git a/src/3rdparty/angle/src/libGLESv2/utilities.cpp b/src/3rdparty/angle/src/libGLESv2/utilities.cpp
deleted file mode 100644
index 30765ffba0..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/utilities.cpp
+++ /dev/null
@@ -1,817 +0,0 @@
-#include "precompiled.h"
-//
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// utilities.cpp: Conversion functions and other utility routines.
-
-#include "libGLESv2/utilities.h"
-#include "libGLESv2/mathutil.h"
-#if defined(ANGLE_OS_WINRT)
-#  include <locale>
-#  include <codecvt>
-#  include <wrl.h>
-#  include <windows.storage.h>
-   using namespace Microsoft::WRL;
-   using namespace ABI::Windows::Storage;
-#endif
-
-namespace gl
-{
-
-int UniformComponentCount(GLenum type)
-{
-    switch (type)
-    {
-      case GL_BOOL:
-      case GL_FLOAT:
-      case GL_INT:
-      case GL_SAMPLER_2D:
-      case GL_SAMPLER_CUBE:
-          return 1;
-      case GL_BOOL_VEC2:
-      case GL_FLOAT_VEC2:
-      case GL_INT_VEC2:
-          return 2;
-      case GL_INT_VEC3:
-      case GL_FLOAT_VEC3:
-      case GL_BOOL_VEC3:
-          return 3;
-      case GL_BOOL_VEC4:
-      case GL_FLOAT_VEC4:
-      case GL_INT_VEC4:
-      case GL_FLOAT_MAT2:
-          return 4;
-      case GL_FLOAT_MAT3:
-          return 9;
-      case GL_FLOAT_MAT4:
-          return 16;
-      default:
-          UNREACHABLE();
-    }
-
-    return 0;
-}
-
-GLenum UniformComponentType(GLenum type)
-{
-    switch(type)
-    {
-      case GL_BOOL:
-      case GL_BOOL_VEC2:
-      case GL_BOOL_VEC3:
-      case GL_BOOL_VEC4:
-          return GL_BOOL;
-      case GL_FLOAT:
-      case GL_FLOAT_VEC2:
-      case GL_FLOAT_VEC3:
-      case GL_FLOAT_VEC4:
-      case GL_FLOAT_MAT2:
-      case GL_FLOAT_MAT3:
-      case GL_FLOAT_MAT4:
-          return GL_FLOAT;
-      case GL_INT:
-      case GL_SAMPLER_2D:
-      case GL_SAMPLER_CUBE:
-      case GL_INT_VEC2:
-      case GL_INT_VEC3:
-      case GL_INT_VEC4:
-          return GL_INT;
-      default:
-          UNREACHABLE();
-    }
-
-    return GL_NONE;
-}
-
-size_t UniformComponentSize(GLenum type)
-{
-    switch(type)
-    {
-      case GL_BOOL:  return sizeof(GLint);
-      case GL_FLOAT: return sizeof(GLfloat);
-      case GL_INT:   return sizeof(GLint);
-      default:       UNREACHABLE();
-    }
-
-    return 0;
-}
-
-size_t UniformInternalSize(GLenum type)
-{
-    // Expanded to 4-element vectors
-    return UniformComponentSize(UniformComponentType(type)) * VariableRowCount(type) * 4;
-}
-
-size_t UniformExternalSize(GLenum type)
-{
-    return UniformComponentSize(UniformComponentType(type)) * UniformComponentCount(type);
-}
-
-int VariableRowCount(GLenum type)
-{
-    switch (type)
-    {
-      case GL_NONE:
-        return 0;
-      case GL_BOOL:
-      case GL_FLOAT:
-      case GL_INT:
-      case GL_BOOL_VEC2:
-      case GL_FLOAT_VEC2:
-      case GL_INT_VEC2:
-      case GL_INT_VEC3:
-      case GL_FLOAT_VEC3:
-      case GL_BOOL_VEC3:
-      case GL_BOOL_VEC4:
-      case GL_FLOAT_VEC4:
-      case GL_INT_VEC4:
-      case GL_SAMPLER_2D:
-      case GL_SAMPLER_CUBE:
-        return 1;
-      case GL_FLOAT_MAT2:
-        return 2;
-      case GL_FLOAT_MAT3:
-        return 3;
-      case GL_FLOAT_MAT4:
-        return 4;
-      default:
-        UNREACHABLE();
-    }
-
-    return 0;
-}
-
-int VariableColumnCount(GLenum type)
-{
-    switch (type)
-    {
-      case GL_NONE:
-        return 0;
-      case GL_BOOL:
-      case GL_FLOAT:
-      case GL_INT:
-      case GL_SAMPLER_2D:
-      case GL_SAMPLER_CUBE:
-        return 1;
-      case GL_BOOL_VEC2:
-      case GL_FLOAT_VEC2:
-      case GL_INT_VEC2:
-      case GL_FLOAT_MAT2:
-        return 2;
-      case GL_INT_VEC3:
-      case GL_FLOAT_VEC3:
-      case GL_BOOL_VEC3:
-      case GL_FLOAT_MAT3:
-        return 3;
-      case GL_BOOL_VEC4:
-      case GL_FLOAT_VEC4:
-      case GL_INT_VEC4:
-      case GL_FLOAT_MAT4:
-        return 4;
-      default:
-        UNREACHABLE();
-    }
-
-    return 0;
-}
-
-int AllocateFirstFreeBits(unsigned int *bits, unsigned int allocationSize, unsigned int bitsSize)
-{
-    ASSERT(allocationSize <= bitsSize);
-
-    unsigned int mask = std::numeric_limits<unsigned int>::max() >> (std::numeric_limits<unsigned int>::digits - allocationSize);
-
-    for (unsigned int i = 0; i < bitsSize - allocationSize + 1; i++)
-    {
-        if ((*bits & mask) == 0)
-        {
-            *bits |= mask;
-            return i;
-        }
-
-        mask <<= 1;
-    }
-
-    return -1;
-}
-
-GLsizei ComputePitch(GLsizei width, GLint internalformat, GLint alignment)
-{
-    ASSERT(alignment > 0 && isPow2(alignment));
-
-    GLsizei rawPitch = ComputePixelSize(internalformat) * width;
-    return (rawPitch + alignment - 1) & ~(alignment - 1);
-}
-
-GLsizei ComputeCompressedPitch(GLsizei width, GLenum internalformat)
-{
-    return ComputeCompressedSize(width, 1, internalformat);
-}
-
-GLsizei ComputeCompressedSize(GLsizei width, GLsizei height, GLenum internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-        return 8 * ((width + 3) / 4) * ((height + 3) / 4);
-      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-        return 16 * ((width + 3) / 4) * ((height + 3) / 4);
-      default:
-        return 0;
-    }
-}
-
-GLsizei ComputeTypeSize(GLenum type)
-{
-    switch (type)
-    {
-      case GL_BYTE:                            return 1;
-      case GL_UNSIGNED_BYTE:                   return 1;
-      case GL_SHORT:                           return 2;
-      case GL_UNSIGNED_SHORT:                  return 2;
-      case GL_INT:                             return 4;
-      case GL_UNSIGNED_INT:                    return 4;
-      case GL_FLOAT:                           return 4;
-      case GL_HALF_FLOAT_OES:                  return 2;
-      case GL_UNSIGNED_SHORT_5_6_5:            return 2;
-      case GL_UNSIGNED_SHORT_4_4_4_4:          return 2;
-      case GL_UNSIGNED_SHORT_5_5_5_1:          return 2;
-      case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:  return 2;
-      case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:  return 2;
-      case GL_UNSIGNED_INT_2_10_10_10_REV_EXT: return 4;
-      case GL_UNSIGNED_INT_24_8_OES:           return 4;
-      default: UNREACHABLE();                  return 0;
-    }
-}
-
-bool IsCompressed(GLenum format)
-{
-    if(format == GL_COMPRESSED_RGB_S3TC_DXT1_EXT ||
-       format == GL_COMPRESSED_RGBA_S3TC_DXT1_EXT ||
-       format == GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE ||
-       format == GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE)
-    {
-        return true;
-    }
-    else
-    {
-        return false;
-    }
-}
-
-bool IsDepthTexture(GLenum format)
-{
-    if (format == GL_DEPTH_COMPONENT ||
-        format == GL_DEPTH_STENCIL_OES ||
-        format == GL_DEPTH_COMPONENT16 ||
-        format == GL_DEPTH_COMPONENT32_OES ||
-        format == GL_DEPTH24_STENCIL8_OES)
-    {
-        return true;
-    }
-
-    return false;
-}
-
-bool IsStencilTexture(GLenum format)
-{
-    if (format == GL_DEPTH_STENCIL_OES ||
-        format == GL_DEPTH24_STENCIL8_OES)
-    {
-        return true;
-    }
-
-    return false;
-}
-
-void MakeValidSize(bool isImage, bool isCompressed, GLsizei *requestWidth, GLsizei *requestHeight, int *levelOffset)
-{
-    int upsampleCount = 0;
-
-    if (isCompressed)
-    {
-        // Don't expand the size of full textures that are at least 4x4
-        // already.
-        if (isImage || *requestWidth < 4 || *requestHeight < 4)
-        {
-            while (*requestWidth % 4 != 0 || *requestHeight % 4 != 0)
-            {
-                *requestWidth <<= 1;
-                *requestHeight <<= 1;
-                upsampleCount++;
-            }
-        }
-    }
-    *levelOffset = upsampleCount;
-}
-
-// Returns the size, in bytes, of a single texel in an Image
-int ComputePixelSize(GLint internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_ALPHA8_EXT:                       return sizeof(unsigned char);
-      case GL_LUMINANCE8_EXT:                   return sizeof(unsigned char);
-      case GL_ALPHA32F_EXT:                     return sizeof(float);
-      case GL_LUMINANCE32F_EXT:                 return sizeof(float);
-      case GL_ALPHA16F_EXT:                     return sizeof(unsigned short);
-      case GL_LUMINANCE16F_EXT:                 return sizeof(unsigned short);
-      case GL_LUMINANCE8_ALPHA8_EXT:            return sizeof(unsigned char) * 2;
-      case GL_LUMINANCE_ALPHA32F_EXT:           return sizeof(float) * 2;
-      case GL_LUMINANCE_ALPHA16F_EXT:           return sizeof(unsigned short) * 2;
-      case GL_RGB8_OES:                         return sizeof(unsigned char) * 3;
-      case GL_RGB565:                           return sizeof(unsigned short);
-      case GL_RGB32F_EXT:                       return sizeof(float) * 3;
-      case GL_RGB16F_EXT:                       return sizeof(unsigned short) * 3;
-      case GL_RGBA8_OES:                        return sizeof(unsigned char) * 4;
-      case GL_RGBA4:                            return sizeof(unsigned short);
-      case GL_RGB5_A1:                          return sizeof(unsigned short);
-      case GL_RGBA32F_EXT:                      return sizeof(float) * 4;
-      case GL_RGBA16F_EXT:                      return sizeof(unsigned short) * 4;
-      case GL_BGRA8_EXT:                        return sizeof(unsigned char) * 4;
-      case GL_BGRA4_ANGLEX:                     return sizeof(unsigned short);
-      case GL_BGR5_A1_ANGLEX:                   return sizeof(unsigned short);
-      default: UNREACHABLE();
-    }
-
-    return 0;
-}
-
-bool IsCubemapTextureTarget(GLenum target)
-{
-    return (target >= GL_TEXTURE_CUBE_MAP_POSITIVE_X && target <= GL_TEXTURE_CUBE_MAP_NEGATIVE_Z);
-}
-
-bool IsInternalTextureTarget(GLenum target)
-{
-    return target == GL_TEXTURE_2D || IsCubemapTextureTarget(target);
-}
-
-GLint ConvertSizedInternalFormat(GLenum format, GLenum type)
-{
-    switch (format)
-    {
-      case GL_ALPHA:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:    return GL_ALPHA8_EXT;
-          case GL_FLOAT:            return GL_ALPHA32F_EXT;
-          case GL_HALF_FLOAT_OES:   return GL_ALPHA16F_EXT;
-          default:                  UNIMPLEMENTED();
-        }
-        break;
-      case GL_LUMINANCE:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:    return GL_LUMINANCE8_EXT;
-          case GL_FLOAT:            return GL_LUMINANCE32F_EXT;
-          case GL_HALF_FLOAT_OES:   return GL_LUMINANCE16F_EXT;
-          default:                  UNIMPLEMENTED();
-        }
-        break;
-      case GL_LUMINANCE_ALPHA:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:    return GL_LUMINANCE8_ALPHA8_EXT;
-          case GL_FLOAT:            return GL_LUMINANCE_ALPHA32F_EXT;
-          case GL_HALF_FLOAT_OES:   return GL_LUMINANCE_ALPHA16F_EXT;
-          default:                  UNIMPLEMENTED();
-        }
-        break;
-      case GL_RGB:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:            return GL_RGB8_OES;
-          case GL_UNSIGNED_SHORT_5_6_5:     return GL_RGB565;
-          case GL_FLOAT:                    return GL_RGB32F_EXT;
-          case GL_HALF_FLOAT_OES:           return GL_RGB16F_EXT;
-          default:                          UNIMPLEMENTED();
-        }
-        break;
-      case GL_RGBA:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:            return GL_RGBA8_OES;
-          case GL_UNSIGNED_SHORT_4_4_4_4:   return GL_RGBA4;
-          case GL_UNSIGNED_SHORT_5_5_5_1:   return GL_RGB5_A1;
-          case GL_FLOAT:                    return GL_RGBA32F_EXT;
-          case GL_HALF_FLOAT_OES:           return GL_RGBA16F_EXT;
-            break;
-          default:                          UNIMPLEMENTED();
-        }
-        break;
-      case GL_BGRA_EXT:
-        switch (type)
-        {
-          case GL_UNSIGNED_BYTE:                    return GL_BGRA8_EXT;
-          case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:   return GL_BGRA4_ANGLEX;
-          case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:   return GL_BGR5_A1_ANGLEX;
-          default:                                  UNIMPLEMENTED();
-        }
-        break;
-      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
-      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
-        return format;
-      case GL_DEPTH_COMPONENT:
-        switch (type)
-        {
-          case GL_UNSIGNED_SHORT:           return GL_DEPTH_COMPONENT16;
-          case GL_UNSIGNED_INT:             return GL_DEPTH_COMPONENT32_OES;
-          default:                          UNIMPLEMENTED();
-        }
-        break;
-      case GL_DEPTH_STENCIL_OES:
-        switch (type)
-        {
-          case GL_UNSIGNED_INT_24_8_OES:    return GL_DEPTH24_STENCIL8_OES;
-          default:                          UNIMPLEMENTED();
-        }
-        break;
-      default:
-        UNIMPLEMENTED();
-    }
-
-    return GL_NONE;
-}
-
-GLenum ExtractFormat(GLenum internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_RGB565:                          return GL_RGB;
-      case GL_RGBA4:                           return GL_RGBA;
-      case GL_RGB5_A1:                         return GL_RGBA;
-      case GL_RGB8_OES:                        return GL_RGB;
-      case GL_RGBA8_OES:                       return GL_RGBA;
-      case GL_LUMINANCE8_ALPHA8_EXT:           return GL_LUMINANCE_ALPHA;
-      case GL_LUMINANCE8_EXT:                  return GL_LUMINANCE;
-      case GL_ALPHA8_EXT:                      return GL_ALPHA;
-      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:    return GL_COMPRESSED_RGB_S3TC_DXT1_EXT;
-      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:   return GL_COMPRESSED_RGBA_S3TC_DXT1_EXT;
-      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE: return GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE;
-      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE: return GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE;
-      case GL_RGBA32F_EXT:                     return GL_RGBA;
-      case GL_RGB32F_EXT:                      return GL_RGB;
-      case GL_ALPHA32F_EXT:                    return GL_ALPHA;
-      case GL_LUMINANCE32F_EXT:                return GL_LUMINANCE;
-      case GL_LUMINANCE_ALPHA32F_EXT:          return GL_LUMINANCE_ALPHA;
-      case GL_RGBA16F_EXT:                     return GL_RGBA;
-      case GL_RGB16F_EXT:                      return GL_RGB;
-      case GL_ALPHA16F_EXT:                    return GL_ALPHA;
-      case GL_LUMINANCE16F_EXT:                return GL_LUMINANCE;
-      case GL_LUMINANCE_ALPHA16F_EXT:          return GL_LUMINANCE_ALPHA;
-      case GL_BGRA8_EXT:                       return GL_BGRA_EXT;
-      case GL_DEPTH_COMPONENT16:               return GL_DEPTH_COMPONENT;
-      case GL_DEPTH_COMPONENT32_OES:           return GL_DEPTH_COMPONENT;
-      case GL_DEPTH24_STENCIL8_OES:            return GL_DEPTH_STENCIL_OES;
-      default:                                 return GL_NONE;   // Unsupported
-    }
-}
-
-GLenum ExtractType(GLenum internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_RGB565:                          return GL_UNSIGNED_SHORT_5_6_5;
-      case GL_RGBA4:                           return GL_UNSIGNED_SHORT_4_4_4_4;
-      case GL_RGB5_A1:                         return GL_UNSIGNED_SHORT_5_5_5_1;
-      case GL_RGB8_OES:                        return GL_UNSIGNED_BYTE;
-      case GL_RGBA8_OES:                       return GL_UNSIGNED_BYTE;
-      case GL_LUMINANCE8_ALPHA8_EXT:           return GL_UNSIGNED_BYTE;
-      case GL_LUMINANCE8_EXT:                  return GL_UNSIGNED_BYTE;
-      case GL_ALPHA8_EXT:                      return GL_UNSIGNED_BYTE;
-      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:    return GL_UNSIGNED_BYTE;
-      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:   return GL_UNSIGNED_BYTE;
-      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE: return GL_UNSIGNED_BYTE;
-      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE: return GL_UNSIGNED_BYTE;
-      case GL_RGBA32F_EXT:                     return GL_FLOAT;
-      case GL_RGB32F_EXT:                      return GL_FLOAT;
-      case GL_ALPHA32F_EXT:                    return GL_FLOAT;
-      case GL_LUMINANCE32F_EXT:                return GL_FLOAT;
-      case GL_LUMINANCE_ALPHA32F_EXT:          return GL_FLOAT;
-      case GL_RGBA16F_EXT:                     return GL_HALF_FLOAT_OES;
-      case GL_RGB16F_EXT:                      return GL_HALF_FLOAT_OES;
-      case GL_ALPHA16F_EXT:                    return GL_HALF_FLOAT_OES;
-      case GL_LUMINANCE16F_EXT:                return GL_HALF_FLOAT_OES;
-      case GL_LUMINANCE_ALPHA16F_EXT:          return GL_HALF_FLOAT_OES;
-      case GL_BGRA8_EXT:                       return GL_UNSIGNED_BYTE;
-      case GL_DEPTH_COMPONENT16:               return GL_UNSIGNED_SHORT;
-      case GL_DEPTH_COMPONENT32_OES:           return GL_UNSIGNED_INT;
-      case GL_DEPTH24_STENCIL8_OES:            return GL_UNSIGNED_INT_24_8_OES;
-      default:                                 return GL_NONE;   // Unsupported
-    }
-}
-
-bool IsColorRenderable(GLenum internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGB565:
-      case GL_RGB8_OES:
-      case GL_RGBA8_OES:
-        return true;
-      case GL_DEPTH_COMPONENT16:
-      case GL_STENCIL_INDEX8:
-      case GL_DEPTH24_STENCIL8_OES:
-        return false;
-      case GL_BGRA8_EXT:
-          return true;
-      default:
-        UNIMPLEMENTED();
-    }
-
-    return false;
-}
-
-bool IsDepthRenderable(GLenum internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_DEPTH_COMPONENT16:
-      case GL_DEPTH24_STENCIL8_OES:
-        return true;
-      case GL_STENCIL_INDEX8:
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGB565:
-      case GL_RGB8_OES:
-      case GL_RGBA8_OES:
-        return false;
-      default:
-        UNIMPLEMENTED();
-    }
-
-    return false;
-}
-
-bool IsStencilRenderable(GLenum internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_STENCIL_INDEX8:
-      case GL_DEPTH24_STENCIL8_OES:
-        return true;
-      case GL_RGBA4:
-      case GL_RGB5_A1:
-      case GL_RGB565:
-      case GL_RGB8_OES:
-      case GL_RGBA8_OES:
-      case GL_DEPTH_COMPONENT16:
-        return false;
-      default:
-        UNIMPLEMENTED();
-    }
-
-    return false;
-}
-
-bool IsFloat32Format(GLint internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_RGBA32F_EXT:
-      case GL_RGB32F_EXT:
-      case GL_ALPHA32F_EXT:
-      case GL_LUMINANCE32F_EXT:
-      case GL_LUMINANCE_ALPHA32F_EXT:
-        return true;
-      default:
-        return false;
-    }
-}
-
-bool IsFloat16Format(GLint internalformat)
-{
-    switch (internalformat)
-    {
-      case GL_RGBA16F_EXT:
-      case GL_RGB16F_EXT:
-      case GL_ALPHA16F_EXT:
-      case GL_LUMINANCE16F_EXT:
-      case GL_LUMINANCE_ALPHA16F_EXT:
-        return true;
-      default:
-        return false;
-    }
-}
-
-unsigned int GetAlphaSize(GLenum colorFormat)
-{
-    switch (colorFormat)
-    {
-      case GL_RGBA16F_EXT:
-        return 16;
-      case GL_RGBA32F_EXT:
-        return 32;
-      case GL_RGBA4:
-        return 4;
-      case GL_RGBA8_OES:
-      case GL_BGRA8_EXT:
-        return 8;
-      case GL_RGB5_A1:
-        return 1;
-      case GL_RGB8_OES:
-      case GL_RGB565:
-      case GL_RGB32F_EXT:
-      case GL_RGB16F_EXT:
-        return 0;
-      default:
-        return 0;
-    }
-}
-
-unsigned int GetRedSize(GLenum colorFormat)
-{
-    switch (colorFormat)
-    {
-      case GL_RGBA16F_EXT:
-      case GL_RGB16F_EXT:
-        return 16;
-      case GL_RGBA32F_EXT:
-      case GL_RGB32F_EXT:
-        return 32;
-      case GL_RGBA4:
-        return 4;
-      case GL_RGBA8_OES:
-      case GL_BGRA8_EXT:
-      case GL_RGB8_OES:
-        return 8;
-      case GL_RGB5_A1:
-      case GL_RGB565:
-        return 5;
-      default:
-        return 0;
-    }
-}
-
-unsigned int GetGreenSize(GLenum colorFormat)
-{
-    switch (colorFormat)
-    {
-      case GL_RGBA16F_EXT:
-      case GL_RGB16F_EXT:
-        return 16;
-      case GL_RGBA32F_EXT:
-      case GL_RGB32F_EXT:
-        return 32;
-      case GL_RGBA4:
-        return 4;
-      case GL_RGBA8_OES:
-      case GL_BGRA8_EXT:
-      case GL_RGB8_OES:
-        return 8;
-      case GL_RGB5_A1:
-        return 5;
-      case GL_RGB565:
-        return 6;
-      default:
-        return 0;
-    }
-}
-
-unsigned int GetBlueSize(GLenum colorFormat)
-{
-    switch (colorFormat)
-    {
-      case GL_RGBA16F_EXT:
-      case GL_RGB16F_EXT:
-        return 16;
-      case GL_RGBA32F_EXT:
-      case GL_RGB32F_EXT:
-        return 32;
-      case GL_RGBA4:
-        return 4;
-      case GL_RGBA8_OES:
-      case GL_BGRA8_EXT:
-      case GL_RGB8_OES:
-        return 8;
-      case GL_RGB5_A1:
-      case GL_RGB565:
-        return 5;
-      default:
-        return 0;
-    }
-}
-
-unsigned int GetDepthSize(GLenum depthFormat)
-{
-    switch (depthFormat)
-    {
-      case GL_DEPTH_COMPONENT16:        return 16;
-      case GL_DEPTH_COMPONENT32_OES:    return 32;
-      case GL_DEPTH24_STENCIL8_OES:     return 24;
-      default:                          return 0;
-    }
-}
-
-unsigned int GetStencilSize(GLenum stencilFormat)
-{
-    switch (stencilFormat)
-    {
-      case GL_DEPTH24_STENCIL8_OES:     return 8;
-      default:                          return 0;
-    }
-}
-
-bool IsTriangleMode(GLenum drawMode)
-{
-    switch (drawMode)
-    {
-      case GL_TRIANGLES:
-      case GL_TRIANGLE_FAN:
-      case GL_TRIANGLE_STRIP:
-        return true;
-      case GL_POINTS:
-      case GL_LINES:
-      case GL_LINE_LOOP:
-      case GL_LINE_STRIP:
-        return false;
-      default: UNREACHABLE();
-    }
-
-    return false;
-}
-
-}
-
-std::string getTempPath()
-{
-#if !defined(ANGLE_OS_WINRT)
-    char path[MAX_PATH];
-    DWORD pathLen = GetTempPathA(sizeof(path) / sizeof(path[0]), path);
-    if (pathLen == 0)
-    {
-        UNREACHABLE();
-        return std::string();
-    }
-
-    UINT unique = GetTempFileNameA(path, "sh", 0, path);
-    if (unique == 0)
-    {
-        UNREACHABLE();
-        return std::string();
-    }
-#else
-    static std::string path;
-
-    while (path.empty()) {
-        ComPtr<IApplicationDataStatics> factory;
-        Wrappers::HStringReference classId(RuntimeClass_Windows_Storage_ApplicationData);
-        HRESULT result = RoGetActivationFactory(classId.Get(), IID_PPV_ARGS(&factory));
-        if (FAILED(result))
-            break;
-
-        ComPtr<IApplicationData> applicationData;
-        result = factory->get_Current(&applicationData);
-        if (FAILED(result))
-            break;
-
-        ComPtr<IStorageFolder> storageFolder;
-        result = applicationData->get_LocalFolder(&storageFolder);
-        if (FAILED(result))
-            break;
-
-        ComPtr<IStorageItem> localFolder;
-        result = storageFolder.As(&localFolder);
-        if (FAILED(result))
-            break;
-
-        HSTRING localFolderPath;
-        result = localFolder->get_Path(&localFolderPath);
-        if (FAILED(result))
-            break;
-
-        std::wstring_convert< std::codecvt_utf8<wchar_t> > converter;
-        path = converter.to_bytes(WindowsGetStringRawBuffer(localFolderPath, NULL));
-        if (path.empty())
-        {
-            UNREACHABLE();
-            break;
-        }
-    }
-#endif
-    
-    return path;
-}
-
-void writeFile(const char* path, const void* content, size_t size)
-{
-    FILE* file = fopen(path, "w");
-    if (!file)
-    {
-        UNREACHABLE();
-        return;
-    }
-
-    fwrite(content, sizeof(char), size, file);
-    fclose(file);
-}
diff --git a/src/3rdparty/angle/src/libGLESv2/utilities.h b/src/3rdparty/angle/src/libGLESv2/utilities.h
deleted file mode 100644
index ed663ebca2..0000000000
--- a/src/3rdparty/angle/src/libGLESv2/utilities.h
+++ /dev/null
@@ -1,67 +0,0 @@
-//
-// Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-
-// utilities.h: Conversion functions and other utility routines.
-
-#ifndef LIBGLESV2_UTILITIES_H
-#define LIBGLESV2_UTILITIES_H
-
-#define GL_APICALL
-#include <GLES2/gl2.h>
-#include <GLES2/gl2ext.h>
-
-#include <string>
-
-namespace gl
-{
-
-struct Color;
-
-int UniformComponentCount(GLenum type);
-GLenum UniformComponentType(GLenum type);
-size_t UniformInternalSize(GLenum type);
-size_t UniformExternalSize(GLenum type);
-int VariableRowCount(GLenum type);
-int VariableColumnCount(GLenum type);
-
-int AllocateFirstFreeBits(unsigned int *bits, unsigned int allocationSize, unsigned int bitsSize);
-
-void MakeValidSize(bool isImage, bool isCompressed, GLsizei *requestWidth, GLsizei *requestHeight, int *levelOffset);
-int ComputePixelSize(GLint internalformat);
-GLsizei ComputePitch(GLsizei width, GLint internalformat, GLint alignment);
-GLsizei ComputeCompressedPitch(GLsizei width, GLenum format);
-GLsizei ComputeCompressedSize(GLsizei width, GLsizei height, GLenum format);
-GLsizei ComputeTypeSize(GLenum type);
-bool IsCompressed(GLenum format);
-bool IsDepthTexture(GLenum format);
-bool IsStencilTexture(GLenum format);
-bool IsCubemapTextureTarget(GLenum target);
-bool IsInternalTextureTarget(GLenum target);
-GLint ConvertSizedInternalFormat(GLenum format, GLenum type);
-GLenum ExtractFormat(GLenum internalformat);
-GLenum ExtractType(GLenum internalformat);
-
-bool IsColorRenderable(GLenum internalformat);
-bool IsDepthRenderable(GLenum internalformat);
-bool IsStencilRenderable(GLenum internalformat);
-
-bool IsFloat32Format(GLint internalformat);
-bool IsFloat16Format(GLint internalformat);
-
-GLuint GetAlphaSize(GLenum colorFormat);
-GLuint GetRedSize(GLenum colorFormat);
-GLuint GetGreenSize(GLenum colorFormat);
-GLuint GetBlueSize(GLenum colorFormat);
-GLuint GetDepthSize(GLenum depthFormat);
-GLuint GetStencilSize(GLenum stencilFormat);
-bool IsTriangleMode(GLenum drawMode);
-
-}
-
-std::string getTempPath();
-void writeFile(const char* path, const void* data, size_t size);
-
-#endif  // LIBGLESV2_UTILITIES_H
diff --git a/src/3rdparty/angle/src/libGLESv2/validationES.cpp b/src/3rdparty/angle/src/libGLESv2/validationES.cpp
new file mode 100644
index 0000000000..f79bc97e4f
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/validationES.cpp
@@ -0,0 +1,1920 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// validationES.h: Validation functions for generic OpenGL ES entry point parameters
+
+#include "libGLESv2/validationES.h"
+#include "libGLESv2/validationES2.h"
+#include "libGLESv2/validationES3.h"
+#include "libGLESv2/Context.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/FramebufferAttachment.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/Query.h"
+#include "libGLESv2/ProgramBinary.h"
+#include "libGLESv2/TransformFeedback.h"
+#include "libGLESv2/VertexArray.h"
+#include "libGLESv2/renderer/BufferImpl.h"
+
+#include "common/mathutil.h"
+#include "common/utilities.h"
+
+namespace gl
+{
+
+bool ValidCap(const Context *context, GLenum cap)
+{
+    switch (cap)
+    {
+      case GL_CULL_FACE:
+      case GL_POLYGON_OFFSET_FILL:
+      case GL_SAMPLE_ALPHA_TO_COVERAGE:
+      case GL_SAMPLE_COVERAGE:
+      case GL_SCISSOR_TEST:
+      case GL_STENCIL_TEST:
+      case GL_DEPTH_TEST:
+      case GL_BLEND:
+      case GL_DITHER:
+        return true;
+      case GL_PRIMITIVE_RESTART_FIXED_INDEX:
+      case GL_RASTERIZER_DISCARD:
+        return (context->getClientVersion() >= 3);
+      default:
+        return false;
+    }
+}
+
+bool ValidTextureTarget(const Context *context, GLenum target)
+{
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+      case GL_TEXTURE_CUBE_MAP:
+        return true;
+
+      case GL_TEXTURE_3D:
+      case GL_TEXTURE_2D_ARRAY:
+        return (context->getClientVersion() >= 3);
+
+      default:
+        return false;
+    }
+}
+
+// This function differs from ValidTextureTarget in that the target must be
+// usable as the destination of a 2D operation-- so a cube face is valid, but
+// GL_TEXTURE_CUBE_MAP is not.
+// Note: duplicate of IsInternalTextureTarget
+bool ValidTexture2DDestinationTarget(const Context *context, GLenum target)
+{
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+        return true;
+      case GL_TEXTURE_2D_ARRAY:
+      case GL_TEXTURE_3D:
+        return (context->getClientVersion() >= 3);
+      default:
+        return false;
+    }
+}
+
+bool ValidFramebufferTarget(GLenum target)
+{
+    META_ASSERT(GL_DRAW_FRAMEBUFFER_ANGLE == GL_DRAW_FRAMEBUFFER && GL_READ_FRAMEBUFFER_ANGLE == GL_READ_FRAMEBUFFER);
+
+    switch (target)
+    {
+      case GL_FRAMEBUFFER:      return true;
+      case GL_READ_FRAMEBUFFER: return true;
+      case GL_DRAW_FRAMEBUFFER: return true;
+      default:                  return false;
+    }
+}
+
+bool ValidBufferTarget(const Context *context, GLenum target)
+{
+    switch (target)
+    {
+      case GL_ARRAY_BUFFER:
+      case GL_ELEMENT_ARRAY_BUFFER:
+        return true;
+
+      case GL_PIXEL_PACK_BUFFER:
+      case GL_PIXEL_UNPACK_BUFFER:
+        return context->getExtensions().pixelBufferObject;
+
+      case GL_COPY_READ_BUFFER:
+      case GL_COPY_WRITE_BUFFER:
+      case GL_TRANSFORM_FEEDBACK_BUFFER:
+      case GL_UNIFORM_BUFFER:
+        return (context->getClientVersion() >= 3);
+
+      default:
+        return false;
+    }
+}
+
+bool ValidBufferParameter(const Context *context, GLenum pname)
+{
+    switch (pname)
+    {
+      case GL_BUFFER_USAGE:
+      case GL_BUFFER_SIZE:
+        return true;
+
+      // GL_BUFFER_MAP_POINTER is a special case, and may only be
+      // queried with GetBufferPointerv
+      case GL_BUFFER_ACCESS_FLAGS:
+      case GL_BUFFER_MAPPED:
+      case GL_BUFFER_MAP_OFFSET:
+      case GL_BUFFER_MAP_LENGTH:
+        return (context->getClientVersion() >= 3);
+
+      default:
+        return false;
+    }
+}
+
+bool ValidMipLevel(const Context *context, GLenum target, GLint level)
+{
+    size_t maxDimension = 0;
+    switch (target)
+    {
+      case GL_TEXTURE_2D:                  maxDimension = context->getCaps().max2DTextureSize;       break;
+      case GL_TEXTURE_CUBE_MAP:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z: maxDimension = context->getCaps().maxCubeMapTextureSize;  break;
+      case GL_TEXTURE_3D:                  maxDimension = context->getCaps().max3DTextureSize;       break;
+      case GL_TEXTURE_2D_ARRAY:            maxDimension = context->getCaps().max2DTextureSize;       break;
+      default: UNREACHABLE();
+    }
+
+    return level <= gl::log2(maxDimension);
+}
+
+bool ValidImageSize(const Context *context, GLenum target, GLint level,
+                    GLsizei width, GLsizei height, GLsizei depth)
+{
+    if (level < 0 || width < 0 || height < 0 || depth < 0)
+    {
+        return false;
+    }
+
+    if (!context->getExtensions().textureNPOT &&
+        (level != 0 && (!gl::isPow2(width) || !gl::isPow2(height) || !gl::isPow2(depth))))
+    {
+        return false;
+    }
+
+    if (!ValidMipLevel(context, target, level))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidCompressedImageSize(const Context *context, GLenum internalFormat, GLsizei width, GLsizei height)
+{
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+    if (!formatInfo.compressed)
+    {
+        return false;
+    }
+
+    if (width  < 0 || (static_cast<GLuint>(width)  > formatInfo.compressedBlockWidth  && width  % formatInfo.compressedBlockWidth != 0) ||
+        height < 0 || (static_cast<GLuint>(height) > formatInfo.compressedBlockHeight && height % formatInfo.compressedBlockHeight != 0))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidQueryType(const Context *context, GLenum queryType)
+{
+    META_ASSERT(GL_ANY_SAMPLES_PASSED == GL_ANY_SAMPLES_PASSED_EXT);
+    META_ASSERT(GL_ANY_SAMPLES_PASSED_CONSERVATIVE == GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT);
+
+    switch (queryType)
+    {
+      case GL_ANY_SAMPLES_PASSED:
+      case GL_ANY_SAMPLES_PASSED_CONSERVATIVE:
+        return true;
+      case GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN:
+        return (context->getClientVersion() >= 3);
+      default:
+        return false;
+    }
+}
+
+bool ValidProgram(Context *context, GLuint id)
+{
+    // ES3 spec (section 2.11.1) -- "Commands that accept shader or program object names will generate the
+    // error INVALID_VALUE if the provided name is not the name of either a shader or program object and
+    // INVALID_OPERATION if the provided name identifies an object that is not the expected type."
+
+    if (context->getProgram(id) != NULL)
+    {
+        return true;
+    }
+    else if (context->getShader(id) != NULL)
+    {
+        // ID is the wrong type
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+    else
+    {
+        // No shader/program object has this ID
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+}
+
+bool ValidateAttachmentTarget(gl::Context *context, GLenum attachment)
+{
+    if (attachment >= GL_COLOR_ATTACHMENT0_EXT && attachment <= GL_COLOR_ATTACHMENT15_EXT)
+    {
+        const unsigned int colorAttachment = (attachment - GL_COLOR_ATTACHMENT0_EXT);
+
+        if (colorAttachment >= context->getCaps().maxColorAttachments)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+    }
+    else
+    {
+        switch (attachment)
+        {
+          case GL_DEPTH_ATTACHMENT:
+          case GL_STENCIL_ATTACHMENT:
+            break;
+
+          case GL_DEPTH_STENCIL_ATTACHMENT:
+            if (context->getClientVersion() < 3)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+    }
+
+    return true;
+}
+
+bool ValidateRenderbufferStorageParameters(gl::Context *context, GLenum target, GLsizei samples,
+                                           GLenum internalformat, GLsizei width, GLsizei height,
+                                           bool angleExtension)
+{
+    switch (target)
+    {
+      case GL_RENDERBUFFER:
+        break;
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (width < 0 || height < 0 || samples < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    const TextureCaps &formatCaps = context->getTextureCaps().get(internalformat);
+    if (!formatCaps.renderable)
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    // ANGLE_framebuffer_multisample does not explicitly state that the internal format must be
+    // sized but it does state that the format must be in the ES2.0 spec table 4.5 which contains
+    // only sized internal formats. The ES3 spec (section 4.4.2) does, however, state that the
+    // internal format must be sized and not an integer format if samples is greater than zero.
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+    if (formatInfo.pixelBytes == 0)
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if ((formatInfo.componentType == GL_UNSIGNED_INT || formatInfo.componentType == GL_INT) && samples > 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (static_cast<GLuint>(std::max(width, height)) > context->getCaps().maxRenderbufferSize)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    // ANGLE_framebuffer_multisample states that the value of samples must be less than or equal
+    // to MAX_SAMPLES_ANGLE (Context::getMaxSupportedSamples) while the ES3.0 spec (section 4.4.2)
+    // states that samples must be less than or equal to the maximum samples for the specified
+    // internal format.
+    if (angleExtension)
+    {
+        ASSERT(context->getExtensions().framebufferMultisample);
+        if (static_cast<GLuint>(samples) > context->getExtensions().maxSamples)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+
+        // Check if this specific format supports enough samples
+        if (static_cast<GLuint>(samples) > formatCaps.getMaxSamples())
+        {
+            context->recordError(Error(GL_OUT_OF_MEMORY));
+            return false;
+        }
+    }
+    else
+    {
+        if (static_cast<GLuint>(samples) > formatCaps.getMaxSamples())
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+    }
+
+    GLuint handle = context->getState().getRenderbufferId();
+    if (handle == 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateFramebufferRenderbufferParameters(gl::Context *context, GLenum target, GLenum attachment,
+                                               GLenum renderbuffertarget, GLuint renderbuffer)
+{
+    if (!ValidFramebufferTarget(target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+    GLuint framebufferHandle = context->getState().getTargetFramebuffer(target)->id();
+
+    if (!framebuffer || (framebufferHandle == 0 && renderbuffer != 0))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (!ValidateAttachmentTarget(context, attachment))
+    {
+        return false;
+    }
+
+    // [OpenGL ES 2.0.25] Section 4.4.3 page 112
+    // [OpenGL ES 3.0.2] Section 4.4.2 page 201
+    // 'renderbuffer' must be either zero or the name of an existing renderbuffer object of
+    // type 'renderbuffertarget', otherwise an INVALID_OPERATION error is generated.
+    if (renderbuffer != 0)
+    {
+        if (!context->getRenderbuffer(renderbuffer))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    return true;
+}
+
+static bool IsPartialBlit(gl::Context *context, gl::FramebufferAttachment *readBuffer, gl::FramebufferAttachment *writeBuffer,
+                          GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,
+                          GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1)
+{
+    if (srcX0 != 0 || srcY0 != 0 || dstX0 != 0 || dstY0 != 0 ||
+        dstX1 != writeBuffer->getWidth() || dstY1 != writeBuffer->getHeight() ||
+        srcX1 != readBuffer->getWidth() || srcY1 != readBuffer->getHeight())
+    {
+        return true;
+    }
+    else if (context->getState().isScissorTestEnabled())
+    {
+        const Rectangle &scissor = context->getState().getScissor();
+
+        return scissor.x > 0 || scissor.y > 0 ||
+               scissor.width < writeBuffer->getWidth() ||
+               scissor.height < writeBuffer->getHeight();
+    }
+    else
+    {
+        return false;
+    }
+}
+
+bool ValidateBlitFramebufferParameters(gl::Context *context, GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,
+                                       GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask,
+                                       GLenum filter, bool fromAngleExtension)
+{
+    switch (filter)
+    {
+      case GL_NEAREST:
+        break;
+      case GL_LINEAR:
+        if (fromAngleExtension)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if ((mask & ~(GL_COLOR_BUFFER_BIT | GL_STENCIL_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)) != 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (mask == 0)
+    {
+        // ES3.0 spec, section 4.3.2 specifies that a mask of zero is valid and no
+        // buffers are copied.
+        return false;
+    }
+
+    if (fromAngleExtension && (srcX1 - srcX0 != dstX1 - dstX0 || srcY1 - srcY0 != dstY1 - dstY0))
+    {
+        ERR("Scaling and flipping in BlitFramebufferANGLE not supported by this implementation.");
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // ES3.0 spec, section 4.3.2 states that linear filtering is only available for the
+    // color buffer, leaving only nearest being unfiltered from above
+    if ((mask & ~GL_COLOR_BUFFER_BIT) != 0 && filter != GL_NEAREST)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (context->getState().getReadFramebuffer()->id() == context->getState().getDrawFramebuffer()->id())
+    {
+        if (fromAngleExtension)
+        {
+            ERR("Blits with the same source and destination framebuffer are not supported by this "
+                "implementation.");
+        }
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    gl::Framebuffer *readFramebuffer = context->getState().getReadFramebuffer();
+    gl::Framebuffer *drawFramebuffer = context->getState().getDrawFramebuffer();
+    if (!readFramebuffer || readFramebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE ||
+        !drawFramebuffer || drawFramebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    {
+        context->recordError(Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+        return false;
+    }
+
+    if (drawFramebuffer->getSamples() != 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    bool sameBounds = srcX0 == dstX0 && srcY0 == dstY0 && srcX1 == dstX1 && srcY1 == dstY1;
+
+    if (mask & GL_COLOR_BUFFER_BIT)
+    {
+        gl::FramebufferAttachment *readColorBuffer = readFramebuffer->getReadColorbuffer();
+        gl::FramebufferAttachment *drawColorBuffer = drawFramebuffer->getFirstColorbuffer();
+
+        if (readColorBuffer && drawColorBuffer)
+        {
+            GLenum readInternalFormat = readColorBuffer->getActualFormat();
+            const InternalFormat &readFormatInfo = GetInternalFormatInfo(readInternalFormat);
+
+            for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; i++)
+            {
+                if (drawFramebuffer->isEnabledColorAttachment(i))
+                {
+                    GLenum drawInternalFormat = drawFramebuffer->getColorbuffer(i)->getActualFormat();
+                    const InternalFormat &drawFormatInfo = GetInternalFormatInfo(drawInternalFormat);
+
+                    // The GL ES 3.0.2 spec (pg 193) states that:
+                    // 1) If the read buffer is fixed point format, the draw buffer must be as well
+                    // 2) If the read buffer is an unsigned integer format, the draw buffer must be as well
+                    // 3) If the read buffer is a signed integer format, the draw buffer must be as well
+                    if ( (readFormatInfo.componentType == GL_UNSIGNED_NORMALIZED || readFormatInfo.componentType == GL_SIGNED_NORMALIZED) &&
+                        !(drawFormatInfo.componentType == GL_UNSIGNED_NORMALIZED || drawFormatInfo.componentType == GL_SIGNED_NORMALIZED))
+                    {
+                        context->recordError(Error(GL_INVALID_OPERATION));
+                        return false;
+                    }
+
+                    if (readFormatInfo.componentType == GL_UNSIGNED_INT && drawFormatInfo.componentType != GL_UNSIGNED_INT)
+                    {
+                        context->recordError(Error(GL_INVALID_OPERATION));
+                        return false;
+                    }
+
+                    if (readFormatInfo.componentType == GL_INT && drawFormatInfo.componentType != GL_INT)
+                    {
+                        context->recordError(Error(GL_INVALID_OPERATION));
+                        return false;
+                    }
+
+                    if (readColorBuffer->getSamples() > 0 && (readInternalFormat != drawInternalFormat || !sameBounds))
+                    {
+                        context->recordError(Error(GL_INVALID_OPERATION));
+                        return false;
+                    }
+                }
+            }
+
+            if ((readFormatInfo.componentType == GL_INT || readFormatInfo.componentType == GL_UNSIGNED_INT) && filter == GL_LINEAR)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+
+            if (fromAngleExtension)
+            {
+                const GLenum readColorbufferType = readFramebuffer->getReadColorbufferType();
+                if (readColorbufferType != GL_TEXTURE_2D && readColorbufferType != GL_RENDERBUFFER)
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+
+                for (unsigned int colorAttachment = 0; colorAttachment < gl::IMPLEMENTATION_MAX_DRAW_BUFFERS; colorAttachment++)
+                {
+                    if (drawFramebuffer->isEnabledColorAttachment(colorAttachment))
+                    {
+                        FramebufferAttachment *attachment = drawFramebuffer->getColorbuffer(colorAttachment);
+                        ASSERT(attachment);
+
+                        if (attachment->type() != GL_TEXTURE_2D && attachment->type() != GL_RENDERBUFFER)
+                        {
+                            context->recordError(Error(GL_INVALID_OPERATION));
+                            return false;
+                        }
+
+                        if (attachment->getActualFormat() != readColorBuffer->getActualFormat())
+                        {
+                            context->recordError(Error(GL_INVALID_OPERATION));
+                            return false;
+                        }
+                    }
+                }
+                if (readFramebuffer->getSamples() != 0 && IsPartialBlit(context, readColorBuffer, drawColorBuffer,
+                                                                        srcX0, srcY0, srcX1, srcY1,
+                                                                        dstX0, dstY0, dstX1, dstY1))
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+        }
+    }
+
+    if (mask & GL_DEPTH_BUFFER_BIT)
+    {
+        gl::FramebufferAttachment *readDepthBuffer = readFramebuffer->getDepthbuffer();
+        gl::FramebufferAttachment *drawDepthBuffer = drawFramebuffer->getDepthbuffer();
+
+        if (readDepthBuffer && drawDepthBuffer)
+        {
+            if (readDepthBuffer->getActualFormat() != drawDepthBuffer->getActualFormat())
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+
+            if (readDepthBuffer->getSamples() > 0 && !sameBounds)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+
+            if (fromAngleExtension)
+            {
+                if (IsPartialBlit(context, readDepthBuffer, drawDepthBuffer,
+                                  srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1))
+                {
+                    ERR("Only whole-buffer depth and stencil blits are supported by this implementation.");
+                    context->recordError(Error(GL_INVALID_OPERATION)); // only whole-buffer copies are permitted
+                    return false;
+                }
+
+                if (readDepthBuffer->getSamples() != 0 || drawDepthBuffer->getSamples() != 0)
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+        }
+    }
+
+    if (mask & GL_STENCIL_BUFFER_BIT)
+    {
+        gl::FramebufferAttachment *readStencilBuffer = readFramebuffer->getStencilbuffer();
+        gl::FramebufferAttachment *drawStencilBuffer = drawFramebuffer->getStencilbuffer();
+
+        if (readStencilBuffer && drawStencilBuffer)
+        {
+            if (readStencilBuffer->getActualFormat() != drawStencilBuffer->getActualFormat())
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+
+            if (readStencilBuffer->getSamples() > 0 && !sameBounds)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+
+            if (fromAngleExtension)
+            {
+                if (IsPartialBlit(context, readStencilBuffer, drawStencilBuffer,
+                                  srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1))
+                {
+                    ERR("Only whole-buffer depth and stencil blits are supported by this implementation.");
+                    context->recordError(Error(GL_INVALID_OPERATION)); // only whole-buffer copies are permitted
+                    return false;
+                }
+
+                if (readStencilBuffer->getSamples() != 0 || drawStencilBuffer->getSamples() != 0)
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+        }
+    }
+
+    return true;
+}
+
+bool ValidateGetVertexAttribParameters(Context *context, GLenum pname)
+{
+    switch (pname)
+    {
+      case GL_VERTEX_ATTRIB_ARRAY_ENABLED:
+      case GL_VERTEX_ATTRIB_ARRAY_SIZE:
+      case GL_VERTEX_ATTRIB_ARRAY_STRIDE:
+      case GL_VERTEX_ATTRIB_ARRAY_TYPE:
+      case GL_VERTEX_ATTRIB_ARRAY_NORMALIZED:
+      case GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING:
+      case GL_CURRENT_VERTEX_ATTRIB:
+        return true;
+
+      case GL_VERTEX_ATTRIB_ARRAY_DIVISOR:
+        // Don't verify ES3 context because GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE uses
+        // the same constant.
+        META_ASSERT(GL_VERTEX_ATTRIB_ARRAY_DIVISOR == GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE);
+        return true;
+
+      case GL_VERTEX_ATTRIB_ARRAY_INTEGER:
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        return true;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+}
+
+bool ValidateTexParamParameters(gl::Context *context, GLenum pname, GLint param)
+{
+    switch (pname)
+    {
+      case GL_TEXTURE_WRAP_R:
+      case GL_TEXTURE_SWIZZLE_R:
+      case GL_TEXTURE_SWIZZLE_G:
+      case GL_TEXTURE_SWIZZLE_B:
+      case GL_TEXTURE_SWIZZLE_A:
+      case GL_TEXTURE_BASE_LEVEL:
+      case GL_TEXTURE_MAX_LEVEL:
+      case GL_TEXTURE_COMPARE_MODE:
+      case GL_TEXTURE_COMPARE_FUNC:
+      case GL_TEXTURE_MIN_LOD:
+      case GL_TEXTURE_MAX_LOD:
+        if (context->getClientVersion() < 3)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      default: break;
+    }
+
+    switch (pname)
+    {
+      case GL_TEXTURE_WRAP_S:
+      case GL_TEXTURE_WRAP_T:
+      case GL_TEXTURE_WRAP_R:
+        switch (param)
+        {
+          case GL_REPEAT:
+          case GL_CLAMP_TO_EDGE:
+          case GL_MIRRORED_REPEAT:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+
+      case GL_TEXTURE_MIN_FILTER:
+        switch (param)
+        {
+          case GL_NEAREST:
+          case GL_LINEAR:
+          case GL_NEAREST_MIPMAP_NEAREST:
+          case GL_LINEAR_MIPMAP_NEAREST:
+          case GL_NEAREST_MIPMAP_LINEAR:
+          case GL_LINEAR_MIPMAP_LINEAR:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      case GL_TEXTURE_MAG_FILTER:
+        switch (param)
+        {
+          case GL_NEAREST:
+          case GL_LINEAR:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      case GL_TEXTURE_USAGE_ANGLE:
+        switch (param)
+        {
+          case GL_NONE:
+          case GL_FRAMEBUFFER_ATTACHMENT_ANGLE:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      case GL_TEXTURE_MAX_ANISOTROPY_EXT:
+        if (!context->getExtensions().textureFilterAnisotropic)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+
+        // we assume the parameter passed to this validation method is truncated, not rounded
+        if (param < 1)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+        return true;
+
+      case GL_TEXTURE_MIN_LOD:
+      case GL_TEXTURE_MAX_LOD:
+        // any value is permissible
+        return true;
+
+      case GL_TEXTURE_COMPARE_MODE:
+        // Acceptable mode parameters from GLES 3.0.2 spec, table 3.17
+        switch (param)
+        {
+          case GL_NONE:
+          case GL_COMPARE_REF_TO_TEXTURE:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      case GL_TEXTURE_COMPARE_FUNC:
+        // Acceptable function parameters from GLES 3.0.2 spec, table 3.17
+        switch (param)
+        {
+          case GL_LEQUAL:
+          case GL_GEQUAL:
+          case GL_LESS:
+          case GL_GREATER:
+          case GL_EQUAL:
+          case GL_NOTEQUAL:
+          case GL_ALWAYS:
+          case GL_NEVER:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      case GL_TEXTURE_SWIZZLE_R:
+      case GL_TEXTURE_SWIZZLE_G:
+      case GL_TEXTURE_SWIZZLE_B:
+      case GL_TEXTURE_SWIZZLE_A:
+        switch (param)
+        {
+          case GL_RED:
+          case GL_GREEN:
+          case GL_BLUE:
+          case GL_ALPHA:
+          case GL_ZERO:
+          case GL_ONE:
+            return true;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+
+      case GL_TEXTURE_BASE_LEVEL:
+      case GL_TEXTURE_MAX_LEVEL:
+        if (param < 0)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+        return true;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+}
+
+bool ValidateSamplerObjectParameter(gl::Context *context, GLenum pname)
+{
+    switch (pname)
+    {
+      case GL_TEXTURE_MIN_FILTER:
+      case GL_TEXTURE_MAG_FILTER:
+      case GL_TEXTURE_WRAP_S:
+      case GL_TEXTURE_WRAP_T:
+      case GL_TEXTURE_WRAP_R:
+      case GL_TEXTURE_MIN_LOD:
+      case GL_TEXTURE_MAX_LOD:
+      case GL_TEXTURE_COMPARE_MODE:
+      case GL_TEXTURE_COMPARE_FUNC:
+        return true;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+}
+
+bool ValidateReadPixelsParameters(gl::Context *context, GLint x, GLint y, GLsizei width, GLsizei height,
+                                  GLenum format, GLenum type, GLsizei *bufSize, GLvoid *pixels)
+{
+    gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
+    ASSERT(framebuffer);
+
+    if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    {
+        context->recordError(Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+        return false;
+    }
+
+    if (context->getState().getReadFramebuffer()->id() != 0 && framebuffer->getSamples() != 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (!framebuffer->getReadColorbuffer())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    GLenum currentInternalFormat, currentFormat, currentType;
+    GLuint clientVersion = context->getClientVersion();
+
+    context->getCurrentReadFormatType(&currentInternalFormat, &currentFormat, &currentType);
+
+    bool validReadFormat = (clientVersion < 3) ? ValidES2ReadFormatType(context, format, type) :
+                                                 ValidES3ReadFormatType(context, currentInternalFormat, format, type);
+
+    if (!(currentFormat == format && currentType == type) && !validReadFormat)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    GLenum sizedInternalFormat = GetSizedInternalFormat(format, type);
+    const InternalFormat &sizedFormatInfo = GetInternalFormatInfo(sizedInternalFormat);
+
+    GLsizei outputPitch = sizedFormatInfo.computeRowPitch(type, width, context->getState().getPackAlignment());
+    // sized query sanity check
+    if (bufSize)
+    {
+        int requiredSize = outputPitch * height;
+        if (requiredSize > *bufSize)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    return true;
+}
+
+bool ValidateBeginQuery(gl::Context *context, GLenum target, GLuint id)
+{
+    if (!ValidQueryType(context, target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (id == 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // From EXT_occlusion_query_boolean: If BeginQueryEXT is called with an <id>
+    // of zero, if the active query object name for <target> is non-zero (for the
+    // targets ANY_SAMPLES_PASSED_EXT and ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, if
+    // the active query for either target is non-zero), if <id> is the name of an
+    // existing query object whose type does not match <target>, or if <id> is the
+    // active query object name for any query type, the error INVALID_OPERATION is
+    // generated.
+
+    // Ensure no other queries are active
+    // NOTE: If other queries than occlusion are supported, we will need to check
+    // separately that:
+    //    a) The query ID passed is not the current active query for any target/type
+    //    b) There are no active queries for the requested target (and in the case
+    //       of GL_ANY_SAMPLES_PASSED_EXT and GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT,
+    //       no query may be active for either if glBeginQuery targets either.
+    if (context->getState().isQueryActive())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    Query *queryObject = context->getQuery(id, true, target);
+
+    // check that name was obtained with glGenQueries
+    if (!queryObject)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // check for type mismatch
+    if (queryObject->getType() != target)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateEndQuery(gl::Context *context, GLenum target)
+{
+    if (!ValidQueryType(context, target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    const Query *queryObject = context->getState().getActiveQuery(target);
+
+    if (queryObject == NULL)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+static bool ValidateUniformCommonBase(gl::Context *context, GLenum targetUniformType,
+                                      GLint location, GLsizei count, LinkedUniform **uniformOut)
+{
+    if (count < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    gl::ProgramBinary *programBinary = context->getState().getCurrentProgramBinary();
+    if (!programBinary)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (location == -1)
+    {
+        // Silently ignore the uniform command
+        return false;
+    }
+
+    if (!programBinary->isValidUniformLocation(location))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    LinkedUniform *uniform = programBinary->getUniformByLocation(location);
+
+    // attempting to write an array to a non-array uniform is an INVALID_OPERATION
+    if (uniform->elementCount() == 1 && count > 1)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    *uniformOut = uniform;
+    return true;
+}
+
+bool ValidateUniform(gl::Context *context, GLenum uniformType, GLint location, GLsizei count)
+{
+    // Check for ES3 uniform entry points
+    if (VariableComponentType(uniformType) == GL_UNSIGNED_INT && context->getClientVersion() < 3)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    LinkedUniform *uniform = NULL;
+    if (!ValidateUniformCommonBase(context, uniformType, location, count, &uniform))
+    {
+        return false;
+    }
+
+    GLenum targetBoolType = VariableBoolVectorType(uniformType);
+    bool samplerUniformCheck = (IsSampler(uniform->type) && uniformType == GL_INT);
+    if (!samplerUniformCheck && uniformType != uniform->type && targetBoolType != uniform->type)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateUniformMatrix(gl::Context *context, GLenum matrixType, GLint location, GLsizei count,
+                           GLboolean transpose)
+{
+    // Check for ES3 uniform entry points
+    int rows = VariableRowCount(matrixType);
+    int cols = VariableColumnCount(matrixType);
+    if (rows != cols && context->getClientVersion() < 3)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (transpose != GL_FALSE && context->getClientVersion() < 3)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    LinkedUniform *uniform = NULL;
+    if (!ValidateUniformCommonBase(context, matrixType, location, count, &uniform))
+    {
+        return false;
+    }
+
+    if (uniform->type != matrixType)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateStateQuery(gl::Context *context, GLenum pname, GLenum *nativeType, unsigned int *numParams)
+{
+    if (!context->getQueryParameterInfo(pname, nativeType, numParams))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (pname >= GL_DRAW_BUFFER0 && pname <= GL_DRAW_BUFFER15)
+    {
+        unsigned int colorAttachment = (pname - GL_DRAW_BUFFER0);
+
+        if (colorAttachment >= context->getCaps().maxDrawBuffers)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    switch (pname)
+    {
+      case GL_TEXTURE_BINDING_2D:
+      case GL_TEXTURE_BINDING_CUBE_MAP:
+      case GL_TEXTURE_BINDING_3D:
+      case GL_TEXTURE_BINDING_2D_ARRAY:
+        if (context->getState().getActiveSampler() >= context->getCaps().maxCombinedTextureImageUnits)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+        break;
+
+      case GL_IMPLEMENTATION_COLOR_READ_TYPE:
+      case GL_IMPLEMENTATION_COLOR_READ_FORMAT:
+        {
+            Framebuffer *framebuffer = context->getState().getReadFramebuffer();
+            ASSERT(framebuffer);
+            if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+
+            FramebufferAttachment *attachment = framebuffer->getReadColorbuffer();
+            if (!attachment)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+        }
+        break;
+
+      default:
+        break;
+    }
+
+    // pname is valid, but there are no parameters to return
+    if (numParams == 0)
+    {
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateCopyTexImageParametersBase(gl::Context* context, GLenum target, GLint level, GLenum internalformat, bool isSubImage,
+                                        GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height,
+                                        GLint border, GLenum *textureFormatOut)
+{
+
+    if (!ValidTexture2DDestinationTarget(context, target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (level < 0 || xoffset < 0 || yoffset < 0 || zoffset < 0 || width < 0 || height < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (std::numeric_limits<GLsizei>::max() - xoffset < width || std::numeric_limits<GLsizei>::max() - yoffset < height)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (border != 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (!ValidMipLevel(context, target, level))
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
+    if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    {
+        context->recordError(Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+        return false;
+    }
+
+    if (context->getState().getReadFramebuffer()->id() != 0 && framebuffer->getSamples() != 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::Caps &caps = context->getCaps();
+
+    gl::Texture *texture = NULL;
+    GLenum textureInternalFormat = GL_NONE;
+    GLint textureLevelWidth = 0;
+    GLint textureLevelHeight = 0;
+    GLint textureLevelDepth = 0;
+    GLuint maxDimension = 0;
+
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+        {
+            gl::Texture2D *texture2d = context->getTexture2D();
+            if (texture2d)
+            {
+                textureInternalFormat = texture2d->getInternalFormat(level);
+                textureLevelWidth = texture2d->getWidth(level);
+                textureLevelHeight = texture2d->getHeight(level);
+                textureLevelDepth = 1;
+                texture = texture2d;
+                maxDimension = caps.max2DTextureSize;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+        {
+            gl::TextureCubeMap *textureCube = context->getTextureCubeMap();
+            if (textureCube)
+            {
+                textureInternalFormat = textureCube->getInternalFormat(target, level);
+                textureLevelWidth = textureCube->getWidth(target, level);
+                textureLevelHeight = textureCube->getHeight(target, level);
+                textureLevelDepth = 1;
+                texture = textureCube;
+                maxDimension = caps.maxCubeMapTextureSize;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_2D_ARRAY:
+        {
+            gl::Texture2DArray *texture2dArray = context->getTexture2DArray();
+            if (texture2dArray)
+            {
+                textureInternalFormat = texture2dArray->getInternalFormat(level);
+                textureLevelWidth = texture2dArray->getWidth(level);
+                textureLevelHeight = texture2dArray->getHeight(level);
+                textureLevelDepth = texture2dArray->getLayers(level);
+                texture = texture2dArray;
+                maxDimension = caps.max2DTextureSize;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_3D:
+        {
+            gl::Texture3D *texture3d = context->getTexture3D();
+            if (texture3d)
+            {
+                textureInternalFormat = texture3d->getInternalFormat(level);
+                textureLevelWidth = texture3d->getWidth(level);
+                textureLevelHeight = texture3d->getHeight(level);
+                textureLevelDepth = texture3d->getDepth(level);
+                texture = texture3d;
+                maxDimension = caps.max3DTextureSize;
+            }
+        }
+        break;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (!texture)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (texture->isImmutable() && !isSubImage)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+
+    if (formatInfo.depthBits > 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (formatInfo.compressed)
+    {
+        if (((width % formatInfo.compressedBlockWidth) != 0 && width != textureLevelWidth) ||
+            ((height % formatInfo.compressedBlockHeight) != 0 && height != textureLevelHeight))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    if (isSubImage)
+    {
+        if (xoffset + width > textureLevelWidth ||
+            yoffset + height > textureLevelHeight ||
+            zoffset >= textureLevelDepth)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+    }
+    else
+    {
+        if (IsCubemapTextureTarget(target) && width != height)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+
+        if (!formatInfo.textureSupport(context->getClientVersion(), context->getExtensions()))
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+
+        int maxLevelDimension = (maxDimension >> level);
+        if (static_cast<int>(width) > maxLevelDimension || static_cast<int>(height) > maxLevelDimension)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+    }
+
+    *textureFormatOut = textureInternalFormat;
+    return true;
+}
+
+static bool ValidateDrawBase(Context *context, GLenum mode, GLsizei count, GLsizei maxVertex, GLsizei primcount)
+{
+    switch (mode)
+    {
+      case GL_POINTS:
+      case GL_LINES:
+      case GL_LINE_LOOP:
+      case GL_LINE_STRIP:
+      case GL_TRIANGLES:
+      case GL_TRIANGLE_STRIP:
+      case GL_TRIANGLE_FAN:
+        break;
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (count < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    const State &state = context->getState();
+
+    // Check for mapped buffers
+    if (state.hasMappedBuffer(GL_ARRAY_BUFFER))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::DepthStencilState &depthStencilState = state.getDepthStencilState();
+    if (depthStencilState.stencilWritemask != depthStencilState.stencilBackWritemask ||
+        state.getStencilRef() != state.getStencilBackRef() ||
+        depthStencilState.stencilMask != depthStencilState.stencilBackMask)
+    {
+        // Note: these separate values are not supported in WebGL, due to D3D's limitations.
+        // See Section 6.10 of the WebGL 1.0 spec
+        ERR("This ANGLE implementation does not support separate front/back stencil "
+            "writemasks, reference values, or stencil mask values.");
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::Framebuffer *fbo = state.getDrawFramebuffer();
+    if (!fbo || fbo->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    {
+        context->recordError(Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+        return false;
+    }
+
+    if (state.getCurrentProgramId() == 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    gl::ProgramBinary *programBinary = state.getCurrentProgramBinary();
+    if (!programBinary->validateSamplers(NULL, context->getCaps()))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // Buffer validations
+    const VertexArray *vao = state.getVertexArray();
+    for (int attributeIndex = 0; attributeIndex < MAX_VERTEX_ATTRIBS; attributeIndex++)
+    {
+        const VertexAttribute &attrib = vao->getVertexAttribute(attributeIndex);
+        bool attribActive = (programBinary->getSemanticIndex(attributeIndex) != -1);
+        if (attribActive && attrib.enabled)
+        {
+            gl::Buffer *buffer = attrib.buffer.get();
+
+            if (buffer)
+            {
+                GLint64 attribStride = static_cast<GLint64>(ComputeVertexAttributeStride(attrib));
+                GLint64 maxVertexElement = 0;
+
+                if (attrib.divisor > 0)
+                {
+                    maxVertexElement = static_cast<GLint64>(primcount) / static_cast<GLint64>(attrib.divisor);
+                }
+                else
+                {
+                    maxVertexElement = static_cast<GLint64>(maxVertex);
+                }
+
+                GLint64 attribDataSize = maxVertexElement * attribStride;
+
+                // [OpenGL ES 3.0.2] section 2.9.4 page 40:
+                // We can return INVALID_OPERATION if our vertex attribute does not have
+                // enough backing data.
+                if (attribDataSize > buffer->getSize())
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+            else if (attrib.pointer == NULL)
+            {
+                // This is an application error that would normally result in a crash,
+                // but we catch it and return an error
+                context->recordError(Error(GL_INVALID_OPERATION, "An enabled vertex array has no buffer and no pointer."));
+                return false;
+            }
+        }
+    }
+
+    // No-op if zero count
+    return (count > 0);
+}
+
+bool ValidateDrawArrays(Context *context, GLenum mode, GLint first, GLsizei count, GLsizei primcount)
+{
+    if (first < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    const State &state = context->getState();
+    gl::TransformFeedback *curTransformFeedback = state.getCurrentTransformFeedback();
+    if (curTransformFeedback && curTransformFeedback->isStarted() && !curTransformFeedback->isPaused() &&
+        curTransformFeedback->getDrawMode() != mode)
+    {
+        // It is an invalid operation to call DrawArrays or DrawArraysInstanced with a draw mode
+        // that does not match the current transform feedback object's draw mode (if transform feedback
+        // is active), (3.0.2, section 2.14, pg 86)
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (!ValidateDrawBase(context, mode, count, count, primcount))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateDrawArraysInstanced(Context *context, GLenum mode, GLint first, GLsizei count, GLsizei primcount)
+{
+    if (primcount < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (!ValidateDrawArrays(context, mode, first, count, primcount))
+    {
+        return false;
+    }
+
+    // No-op if zero primitive count
+    return (primcount > 0);
+}
+
+static bool ValidateDrawInstancedANGLE(Context *context)
+{
+    // Verify there is at least one active attribute with a divisor of zero
+    const gl::State& state = context->getState();
+
+    gl::ProgramBinary *programBinary = state.getCurrentProgramBinary();
+
+    const VertexArray *vao = state.getVertexArray();
+    for (int attributeIndex = 0; attributeIndex < MAX_VERTEX_ATTRIBS; attributeIndex++)
+    {
+        const VertexAttribute &attrib = vao->getVertexAttribute(attributeIndex);
+        bool active = (programBinary->getSemanticIndex(attributeIndex) != -1);
+        if (active && attrib.divisor == 0)
+        {
+            return true;
+        }
+    }
+
+    context->recordError(Error(GL_INVALID_OPERATION, "ANGLE_instanced_arrays requires that at least one active attribute"
+                                                     "has a divisor of zero."));
+    return false;
+}
+
+bool ValidateDrawArraysInstancedANGLE(Context *context, GLenum mode, GLint first, GLsizei count, GLsizei primcount)
+{
+    if (!ValidateDrawInstancedANGLE(context))
+    {
+        return false;
+    }
+
+    return ValidateDrawArraysInstanced(context, mode, first, count, primcount);
+}
+
+bool ValidateDrawElements(Context *context, GLenum mode, GLsizei count, GLenum type,
+                          const GLvoid* indices, GLsizei primcount, rx::RangeUI *indexRangeOut)
+{
+    switch (type)
+    {
+      case GL_UNSIGNED_BYTE:
+      case GL_UNSIGNED_SHORT:
+        break;
+      case GL_UNSIGNED_INT:
+        if (!context->getExtensions().elementIndexUint)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    const State &state = context->getState();
+
+    gl::TransformFeedback *curTransformFeedback = state.getCurrentTransformFeedback();
+    if (curTransformFeedback && curTransformFeedback->isStarted() && !curTransformFeedback->isPaused())
+    {
+        // It is an invalid operation to call DrawElements, DrawRangeElements or DrawElementsInstanced
+        // while transform feedback is active, (3.0.2, section 2.14, pg 86)
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // Check for mapped buffers
+    if (state.hasMappedBuffer(GL_ELEMENT_ARRAY_BUFFER))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::VertexArray *vao = state.getVertexArray();
+    const gl::Buffer *elementArrayBuffer = vao->getElementArrayBuffer();
+    if (!indices && !elementArrayBuffer)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (elementArrayBuffer)
+    {
+        const gl::Type &typeInfo = gl::GetTypeInfo(type);
+
+        GLint64 offset = reinterpret_cast<GLint64>(indices);
+        GLint64 byteCount = static_cast<GLint64>(typeInfo.bytes) * static_cast<GLint64>(count)+offset;
+
+        // check for integer overflows
+        if (static_cast<GLuint>(count) > (std::numeric_limits<GLuint>::max() / typeInfo.bytes) ||
+            byteCount > static_cast<GLint64>(std::numeric_limits<GLuint>::max()))
+        {
+            context->recordError(Error(GL_OUT_OF_MEMORY));
+            return false;
+        }
+
+        // Check for reading past the end of the bound buffer object
+        if (byteCount > elementArrayBuffer->getSize())
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+    else if (!indices)
+    {
+        // Catch this programming error here
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // Use max index to validate if our vertex buffers are large enough for the pull.
+    // TODO: offer fast path, with disabled index validation.
+    // TODO: also disable index checking on back-ends that are robust to out-of-range accesses.
+    if (elementArrayBuffer)
+    {
+        GLint64 offset = reinterpret_cast<GLint64>(indices);
+        if (!elementArrayBuffer->getIndexRangeCache()->findRange(type, offset, count, indexRangeOut, NULL))
+        {
+            const void *dataPointer = elementArrayBuffer->getImplementation()->getData();
+            const uint8_t *offsetPointer = static_cast<const uint8_t *>(dataPointer) + offset;
+            *indexRangeOut = rx::IndexRangeCache::ComputeRange(type, offsetPointer, count);
+        }
+    }
+    else
+    {
+        *indexRangeOut = rx::IndexRangeCache::ComputeRange(type, indices, count);
+    }
+
+    if (!ValidateDrawBase(context, mode, count, static_cast<GLsizei>(indexRangeOut->end), primcount))
+    {
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateDrawElementsInstanced(Context *context,
+                                   GLenum mode, GLsizei count, GLenum type,
+                                   const GLvoid *indices, GLsizei primcount,
+                                   rx::RangeUI *indexRangeOut)
+{
+    if (primcount < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (!ValidateDrawElements(context, mode, count, type, indices, primcount, indexRangeOut))
+    {
+        return false;
+    }
+
+    // No-op zero primitive count
+    return (primcount > 0);
+}
+
+bool ValidateDrawElementsInstancedANGLE(Context *context, GLenum mode, GLsizei count, GLenum type,
+                                        const GLvoid *indices, GLsizei primcount, rx::RangeUI *indexRangeOut)
+{
+    if (!ValidateDrawInstancedANGLE(context))
+    {
+        return false;
+    }
+
+    return ValidateDrawElementsInstanced(context, mode, count, type, indices, primcount, indexRangeOut);
+}
+
+bool ValidateFramebufferTextureBase(Context *context, GLenum target, GLenum attachment,
+                                    GLuint texture, GLint level)
+{
+    if (!ValidFramebufferTarget(target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (!ValidateAttachmentTarget(context, attachment))
+    {
+        return false;
+    }
+
+    if (texture != 0)
+    {
+        gl::Texture *tex = context->getTexture(texture);
+
+        if (tex == NULL)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        if (level < 0)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+    }
+
+    const gl::Framebuffer *framebuffer = context->getState().getTargetFramebuffer(target);
+    GLuint framebufferHandle = context->getState().getTargetFramebuffer(target)->id();
+
+    if (framebufferHandle == 0 || !framebuffer)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateFramebufferTexture2D(Context *context, GLenum target, GLenum attachment,
+                                  GLenum textarget, GLuint texture, GLint level)
+{
+    // Attachments are required to be bound to level 0 in ES2
+    if (context->getClientVersion() < 3 && level != 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (!ValidateFramebufferTextureBase(context, target, attachment, texture, level))
+    {
+        return false;
+    }
+
+    if (texture != 0)
+    {
+        gl::Texture *tex = context->getTexture(texture);
+        ASSERT(tex);
+
+        const gl::Caps &caps = context->getCaps();
+
+        switch (textarget)
+        {
+          case GL_TEXTURE_2D:
+            {
+                if (level > gl::log2(caps.max2DTextureSize))
+                {
+                    context->recordError(Error(GL_INVALID_VALUE));
+                    return false;
+                }
+                if (tex->getTarget() != GL_TEXTURE_2D)
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+                gl::Texture2D *tex2d = static_cast<gl::Texture2D *>(tex);
+                if (tex2d->isCompressed(level))
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+            break;
+
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+          case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+          case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+            {
+                if (level > gl::log2(caps.maxCubeMapTextureSize))
+                {
+                    context->recordError(Error(GL_INVALID_VALUE));
+                    return false;
+                }
+                if (tex->getTarget() != GL_TEXTURE_CUBE_MAP)
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+                gl::TextureCubeMap *texcube = static_cast<gl::TextureCubeMap *>(tex);
+                if (texcube->isCompressed(textarget, level))
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+            break;
+
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+    }
+
+    return true;
+}
+
+bool ValidateGetUniformBase(Context *context, GLuint program, GLint location)
+{
+    if (program == 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    gl::Program *programObject = context->getProgram(program);
+
+    if (!programObject || !programObject->isLinked())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+    if (!programBinary)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (!programBinary->isValidUniformLocation(location))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateGetUniformfv(Context *context, GLuint program, GLint location, GLfloat* params)
+{
+    return ValidateGetUniformBase(context, program, location);
+}
+
+bool ValidateGetUniformiv(Context *context, GLuint program, GLint location, GLint* params)
+{
+    return ValidateGetUniformBase(context, program, location);
+}
+
+static bool ValidateSizedGetUniform(Context *context, GLuint program, GLint location, GLsizei bufSize)
+{
+    if (!ValidateGetUniformBase(context, program, location))
+    {
+        return false;
+    }
+
+    gl::Program *programObject = context->getProgram(program);
+    ASSERT(programObject);
+    gl::ProgramBinary *programBinary = programObject->getProgramBinary();
+
+    // sized queries -- ensure the provided buffer is large enough
+    LinkedUniform *uniform = programBinary->getUniformByLocation(location);
+    size_t requiredBytes = VariableExternalSize(uniform->type);
+    if (static_cast<size_t>(bufSize) < requiredBytes)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateGetnUniformfvEXT(Context *context, GLuint program, GLint location, GLsizei bufSize, GLfloat* params)
+{
+    return ValidateSizedGetUniform(context, program, location, bufSize);
+}
+
+bool ValidateGetnUniformivEXT(Context *context, GLuint program, GLint location, GLsizei bufSize, GLint* params)
+{
+    return ValidateSizedGetUniform(context, program, location, bufSize);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/validationES.h b/src/3rdparty/angle/src/libGLESv2/validationES.h
new file mode 100644
index 0000000000..1fdb633cb6
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/validationES.h
@@ -0,0 +1,92 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// validationES.h: Validation functions for generic OpenGL ES entry point parameters
+
+#ifndef LIBGLESV2_VALIDATION_ES_H
+#define LIBGLESV2_VALIDATION_ES_H
+
+#include "common/mathutil.h"
+
+#include <GLES2/gl2.h>
+#include <GLES3/gl3.h>
+
+namespace gl
+{
+
+class Context;
+
+bool ValidCap(const Context *context, GLenum cap);
+bool ValidTextureTarget(const Context *context, GLenum target);
+bool ValidTexture2DDestinationTarget(const Context *context, GLenum target);
+bool ValidFramebufferTarget(GLenum target);
+bool ValidBufferTarget(const Context *context, GLenum target);
+bool ValidBufferParameter(const Context *context, GLenum pname);
+bool ValidMipLevel(const Context *context, GLenum target, GLint level);
+bool ValidImageSize(const Context *context, GLenum target, GLint level, GLsizei width, GLsizei height, GLsizei depth);
+bool ValidCompressedImageSize(const Context *context, GLenum internalFormat, GLsizei width, GLsizei height);
+bool ValidQueryType(const Context *context, GLenum queryType);
+bool ValidProgram(Context *context, GLuint id);
+
+bool ValidateAttachmentTarget(Context *context, GLenum attachment);
+bool ValidateRenderbufferStorageParameters(Context *context, GLenum target, GLsizei samples,
+                                           GLenum internalformat, GLsizei width, GLsizei height,
+                                           bool angleExtension);
+bool ValidateFramebufferRenderbufferParameters(Context *context, GLenum target, GLenum attachment,
+                                               GLenum renderbuffertarget, GLuint renderbuffer);
+
+bool ValidateBlitFramebufferParameters(Context *context, GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,
+                                       GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask,
+                                       GLenum filter, bool fromAngleExtension);
+
+bool ValidateGetVertexAttribParameters(Context *context, GLenum pname);
+
+bool ValidateTexParamParameters(Context *context, GLenum pname, GLint param);
+
+bool ValidateSamplerObjectParameter(Context *context, GLenum pname);
+
+bool ValidateReadPixelsParameters(Context *context, GLint x, GLint y, GLsizei width, GLsizei height,
+                                  GLenum format, GLenum type, GLsizei *bufSize, GLvoid *pixels);
+
+bool ValidateBeginQuery(Context *context, GLenum target, GLuint id);
+bool ValidateEndQuery(Context *context, GLenum target);
+
+bool ValidateUniform(Context *context, GLenum uniformType, GLint location, GLsizei count);
+bool ValidateUniformMatrix(Context *context, GLenum matrixType, GLint location, GLsizei count,
+                           GLboolean transpose);
+
+bool ValidateStateQuery(Context *context, GLenum pname, GLenum *nativeType, unsigned int *numParams);
+
+bool ValidateCopyTexImageParametersBase(Context* context, GLenum target, GLint level, GLenum internalformat, bool isSubImage,
+                                        GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height,
+                                        GLint border, GLenum *textureInternalFormatOut);
+
+bool ValidateDrawArrays(Context *context, GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+bool ValidateDrawArraysInstanced(Context *context, GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+bool ValidateDrawArraysInstancedANGLE(Context *context, GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+
+bool ValidateDrawElements(Context *context, GLenum mode, GLsizei count, GLenum type,
+                          const GLvoid* indices, GLsizei primcount, rx::RangeUI *indexRangeOut);
+
+bool ValidateDrawElementsInstanced(Context *context, GLenum mode, GLsizei count, GLenum type,
+                                   const GLvoid *indices, GLsizei primcount, rx::RangeUI *indexRangeOut);
+bool ValidateDrawElementsInstancedANGLE(Context *context, GLenum mode, GLsizei count, GLenum type,
+                                        const GLvoid *indices, GLsizei primcount, rx::RangeUI *indexRangeOut);
+
+bool ValidateFramebufferTextureBase(Context *context, GLenum target, GLenum attachment,
+                                    GLuint texture, GLint level);
+bool ValidateFramebufferTexture2D(Context *context, GLenum target, GLenum attachment,
+                                  GLenum textarget, GLuint texture, GLint level);
+
+bool ValidateGetUniformBase(Context *context, GLuint program, GLint location);
+bool ValidateGetUniformfv(Context *context, GLuint program, GLint location, GLfloat* params);
+bool ValidateGetUniformiv(Context *context, GLuint program, GLint location, GLint* params);
+bool ValidateGetnUniformfvEXT(Context *context, GLuint program, GLint location, GLsizei bufSize, GLfloat* params);
+bool ValidateGetnUniformivEXT(Context *context, GLuint program, GLint location, GLsizei bufSize, GLint* params);
+
+}
+
+#endif // LIBGLESV2_VALIDATION_ES_H
diff --git a/src/3rdparty/angle/src/libGLESv2/validationES2.cpp b/src/3rdparty/angle/src/libGLESv2/validationES2.cpp
new file mode 100644
index 0000000000..f950454df0
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/validationES2.cpp
@@ -0,0 +1,980 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// validationES2.cpp: Validation functions for OpenGL ES 2.0 entry point parameters
+
+#include "libGLESv2/validationES2.h"
+#include "libGLESv2/validationES.h"
+#include "libGLESv2/Context.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/FramebufferAttachment.h"
+
+#include "common/mathutil.h"
+#include "common/utilities.h"
+
+namespace gl
+{
+
+static bool ValidateSubImageParams2D(Context *context, bool compressed, GLsizei width, GLsizei height,
+                                     GLint xoffset, GLint yoffset, GLint level, GLenum format, GLenum type,
+                                     gl::Texture2D *texture)
+{
+    if (!texture)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (compressed != texture->isCompressed(level))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (format != GL_NONE)
+    {
+        if (gl::GetFormatTypeInfo(format, type).internalFormat != texture->getInternalFormat(level))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    if (compressed)
+    {
+        if ((width % 4 != 0 && width != texture->getWidth(level)) ||
+            (height % 4 != 0 && height != texture->getHeight(level)))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    if (xoffset + width > texture->getWidth(level) ||
+        yoffset + height > texture->getHeight(level))
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    return true;
+}
+
+static bool ValidateSubImageParamsCube(Context *context, bool compressed, GLsizei width, GLsizei height,
+                                       GLint xoffset, GLint yoffset, GLenum target, GLint level, GLenum format, GLenum type,
+                                       gl::TextureCubeMap *texture)
+{
+    if (!texture)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (compressed != texture->isCompressed(target, level))
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (format != GL_NONE)
+    {
+        if (gl::GetFormatTypeInfo(format, type).internalFormat != texture->getInternalFormat(target, level))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    if (compressed)
+    {
+        if ((width % 4 != 0 && width != texture->getWidth(target, 0)) ||
+            (height % 4 != 0 && height != texture->getHeight(target, 0)))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    if (xoffset + width > texture->getWidth(target, level) ||
+        yoffset + height > texture->getHeight(target, level))
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateES2TexImageParameters(Context *context, GLenum target, GLint level, GLenum internalformat, bool isCompressed, bool isSubImage,
+                                   GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
+                                   GLint border, GLenum format, GLenum type, const GLvoid *pixels)
+{
+    if (!ValidTexture2DDestinationTarget(context, target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (!ValidImageSize(context, target, level, width, height, 1))
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (level < 0 || xoffset < 0 ||
+        std::numeric_limits<GLsizei>::max() - xoffset < width ||
+        std::numeric_limits<GLsizei>::max() - yoffset < height)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (!isSubImage && !isCompressed && internalformat != format)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::Caps &caps = context->getCaps();
+
+    gl::Texture *texture = NULL;
+    bool textureCompressed = false;
+    GLenum textureInternalFormat = GL_NONE;
+    GLint textureLevelWidth = 0;
+    GLint textureLevelHeight = 0;
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+        {
+            if (static_cast<GLuint>(width) > (caps.max2DTextureSize >> level) ||
+                static_cast<GLuint>(height) > (caps.max2DTextureSize >> level))
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            gl::Texture2D *tex2d = context->getTexture2D();
+            if (tex2d)
+            {
+                textureCompressed = tex2d->isCompressed(level);
+                textureInternalFormat = tex2d->getInternalFormat(level);
+                textureLevelWidth = tex2d->getWidth(level);
+                textureLevelHeight = tex2d->getHeight(level);
+                texture = tex2d;
+            }
+
+            if (isSubImage && !ValidateSubImageParams2D(context, isCompressed, width, height, xoffset, yoffset,
+                                                        level, format, type, tex2d))
+            {
+                return false;
+            }
+
+            texture = tex2d;
+        }
+        break;
+
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+        {
+            if (!isSubImage && width != height)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            if (static_cast<GLuint>(width) > (caps.maxCubeMapTextureSize >> level) ||
+                static_cast<GLuint>(height) > (caps.maxCubeMapTextureSize >> level))
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            gl::TextureCubeMap *texCube = context->getTextureCubeMap();
+            if (texCube)
+            {
+                textureCompressed = texCube->isCompressed(target, level);
+                textureInternalFormat = texCube->getInternalFormat(target, level);
+                textureLevelWidth = texCube->getWidth(target, level);
+                textureLevelHeight = texCube->getHeight(target, level);
+                texture = texCube;
+            }
+
+            if (isSubImage && !ValidateSubImageParamsCube(context, isCompressed, width, height, xoffset, yoffset,
+                                                          target, level, format, type, texCube))
+            {
+                return false;
+            }
+        }
+        break;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (!texture)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (!isSubImage && texture->isImmutable())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // Verify zero border
+    if (border != 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    GLenum actualInternalFormat = isSubImage ? textureInternalFormat : internalformat;
+    if (isCompressed)
+    {
+        if (!ValidCompressedImageSize(context, actualInternalFormat, width, height))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        switch (actualInternalFormat)
+        {
+          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
+          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
+            if (!context->getExtensions().textureCompressionDXT1)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
+            if (!context->getExtensions().textureCompressionDXT1)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
+            if (!context->getExtensions().textureCompressionDXT5)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+    }
+    else
+    {
+        // validate <type> by itself (used as secondary key below)
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:
+          case GL_UNSIGNED_SHORT_5_6_5:
+          case GL_UNSIGNED_SHORT_4_4_4_4:
+          case GL_UNSIGNED_SHORT_5_5_5_1:
+          case GL_UNSIGNED_SHORT:
+          case GL_UNSIGNED_INT:
+          case GL_UNSIGNED_INT_24_8_OES:
+          case GL_HALF_FLOAT_OES:
+          case GL_FLOAT:
+            break;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+
+        // validate <format> + <type> combinations
+        // - invalid <format> -> sets INVALID_ENUM
+        // - invalid <format>+<type> combination -> sets INVALID_OPERATION
+        switch (format)
+        {
+          case GL_ALPHA:
+          case GL_LUMINANCE:
+          case GL_LUMINANCE_ALPHA:
+            switch (type)
+            {
+              case GL_UNSIGNED_BYTE:
+              case GL_FLOAT:
+              case GL_HALF_FLOAT_OES:
+                break;
+              default:
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+            }
+            break;
+          case GL_RED:
+          case GL_RG:
+              if (!context->getExtensions().textureRG)
+              {
+                  context->recordError(Error(GL_INVALID_ENUM));
+                  return false;
+              }
+              switch (type)
+              {
+                case GL_UNSIGNED_BYTE:
+                case GL_FLOAT:
+                case GL_HALF_FLOAT_OES:
+                  break;
+                default:
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RGB:
+            switch (type)
+            {
+              case GL_UNSIGNED_BYTE:
+              case GL_UNSIGNED_SHORT_5_6_5:
+              case GL_FLOAT:
+              case GL_HALF_FLOAT_OES:
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_RGBA:
+            switch (type)
+            {
+              case GL_UNSIGNED_BYTE:
+              case GL_UNSIGNED_SHORT_4_4_4_4:
+              case GL_UNSIGNED_SHORT_5_5_5_1:
+              case GL_FLOAT:
+              case GL_HALF_FLOAT_OES:
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_BGRA_EXT:
+            switch (type)
+            {
+              case GL_UNSIGNED_BYTE:
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_SRGB_EXT:
+          case GL_SRGB_ALPHA_EXT:
+            if (!context->getExtensions().sRGB)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            switch (type)
+            {
+              case GL_UNSIGNED_BYTE:
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:  // error cases for compressed textures are handled below
+          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
+          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
+          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
+            break;
+          case GL_DEPTH_COMPONENT:
+            switch (type)
+            {
+              case GL_UNSIGNED_SHORT:
+              case GL_UNSIGNED_INT:
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_DEPTH_STENCIL_OES:
+            switch (type)
+            {
+              case GL_UNSIGNED_INT_24_8_OES:
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+
+        switch (format)
+        {
+          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
+          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
+            if (context->getExtensions().textureCompressionDXT1)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
+            if (context->getExtensions().textureCompressionDXT3)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
+            if (context->getExtensions().textureCompressionDXT5)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_DEPTH_COMPONENT:
+          case GL_DEPTH_STENCIL_OES:
+            if (!context->getExtensions().depthTextures)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+            if (target != GL_TEXTURE_2D)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            // OES_depth_texture supports loading depth data and multiple levels,
+            // but ANGLE_depth_texture does not
+            if (pixels != NULL || level != 0)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          default:
+            break;
+        }
+
+        if (type == GL_FLOAT)
+        {
+            if (!context->getExtensions().textureFloat)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+        }
+        else if (type == GL_HALF_FLOAT_OES)
+        {
+            if (!context->getExtensions().textureHalfFloat)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+        }
+    }
+
+    return true;
+}
+
+
+
+bool ValidateES2CopyTexImageParameters(Context* context, GLenum target, GLint level, GLenum internalformat, bool isSubImage,
+                                       GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height,
+                                       GLint border)
+{
+    GLenum textureInternalFormat = GL_NONE;
+
+    if (!ValidateCopyTexImageParametersBase(context, target, level, internalformat, isSubImage,
+                                            xoffset, yoffset, 0, x, y, width, height, border, &textureInternalFormat))
+    {
+        return false;
+    }
+
+    gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
+    GLenum colorbufferFormat = framebuffer->getReadColorbuffer()->getInternalFormat();
+    GLenum textureFormat = gl::GetInternalFormatInfo(textureInternalFormat).format;
+
+    // [OpenGL ES 2.0.24] table 3.9
+    if (isSubImage)
+    {
+        switch (textureFormat)
+        {
+          case GL_ALPHA:
+            if (colorbufferFormat != GL_ALPHA8_EXT &&
+                colorbufferFormat != GL_RGBA4 &&
+                colorbufferFormat != GL_RGB5_A1 &&
+                colorbufferFormat != GL_RGBA8_OES)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_LUMINANCE:
+              if (colorbufferFormat != GL_R8_EXT &&
+                  colorbufferFormat != GL_RG8_EXT &&
+                  colorbufferFormat != GL_RGB565 &&
+                  colorbufferFormat != GL_RGB8_OES &&
+                  colorbufferFormat != GL_RGBA4 &&
+                  colorbufferFormat != GL_RGB5_A1 &&
+                  colorbufferFormat != GL_RGBA8_OES)
+              {
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RED_EXT:
+              if (colorbufferFormat != GL_R8_EXT &&
+                  colorbufferFormat != GL_RG8_EXT &&
+                  colorbufferFormat != GL_RGB565 &&
+                  colorbufferFormat != GL_RGB8_OES &&
+                  colorbufferFormat != GL_RGBA4 &&
+                  colorbufferFormat != GL_RGB5_A1 &&
+                  colorbufferFormat != GL_RGBA8_OES)
+              {
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RG_EXT:
+              if (colorbufferFormat != GL_RG8_EXT &&
+                  colorbufferFormat != GL_RGB565 &&
+                  colorbufferFormat != GL_RGB8_OES &&
+                  colorbufferFormat != GL_RGBA4 &&
+                  colorbufferFormat != GL_RGB5_A1 &&
+                  colorbufferFormat != GL_RGBA8_OES)
+              {
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RGB:
+            if (colorbufferFormat != GL_RGB565 &&
+                colorbufferFormat != GL_RGB8_OES &&
+                colorbufferFormat != GL_RGBA4 &&
+                colorbufferFormat != GL_RGB5_A1 &&
+                colorbufferFormat != GL_RGBA8_OES)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_LUMINANCE_ALPHA:
+          case GL_RGBA:
+            if (colorbufferFormat != GL_RGBA4 &&
+                colorbufferFormat != GL_RGB5_A1 &&
+                colorbufferFormat != GL_RGBA8_OES)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
+          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
+          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
+          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+          case GL_DEPTH_COMPONENT:
+          case GL_DEPTH_STENCIL_OES:
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+          default:
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+    else
+    {
+        switch (internalformat)
+        {
+          case GL_ALPHA:
+            if (colorbufferFormat != GL_ALPHA8_EXT &&
+                colorbufferFormat != GL_RGBA4 &&
+                colorbufferFormat != GL_RGB5_A1 &&
+                colorbufferFormat != GL_BGRA8_EXT &&
+                colorbufferFormat != GL_RGBA8_OES)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_LUMINANCE:
+              if (colorbufferFormat != GL_R8_EXT &&
+                  colorbufferFormat != GL_RG8_EXT &&
+                  colorbufferFormat != GL_RGB565 &&
+                  colorbufferFormat != GL_RGB8_OES &&
+                  colorbufferFormat != GL_RGBA4 &&
+                  colorbufferFormat != GL_RGB5_A1 &&
+                  colorbufferFormat != GL_BGRA8_EXT &&
+                  colorbufferFormat != GL_RGBA8_OES)
+              {
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RED_EXT:
+              if (colorbufferFormat != GL_R8_EXT &&
+                  colorbufferFormat != GL_RG8_EXT &&
+                  colorbufferFormat != GL_RGB565 &&
+                  colorbufferFormat != GL_RGB8_OES &&
+                  colorbufferFormat != GL_RGBA4 &&
+                  colorbufferFormat != GL_RGB5_A1 &&
+                  colorbufferFormat != GL_BGRA8_EXT &&
+                  colorbufferFormat != GL_RGBA8_OES)
+              {
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RG_EXT:
+              if (colorbufferFormat != GL_RG8_EXT &&
+                  colorbufferFormat != GL_RGB565 &&
+                  colorbufferFormat != GL_RGB8_OES &&
+                  colorbufferFormat != GL_RGBA4 &&
+                  colorbufferFormat != GL_RGB5_A1 &&
+                  colorbufferFormat != GL_BGRA8_EXT &&
+                  colorbufferFormat != GL_RGBA8_OES)
+              {
+                  context->recordError(Error(GL_INVALID_OPERATION));
+                  return false;
+              }
+              break;
+          case GL_RGB:
+            if (colorbufferFormat != GL_RGB565 &&
+                colorbufferFormat != GL_RGB8_OES &&
+                colorbufferFormat != GL_RGBA4 &&
+                colorbufferFormat != GL_RGB5_A1 &&
+                colorbufferFormat != GL_BGRA8_EXT &&
+                colorbufferFormat != GL_RGBA8_OES)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_LUMINANCE_ALPHA:
+          case GL_RGBA:
+            if (colorbufferFormat != GL_RGBA4 &&
+                colorbufferFormat != GL_RGB5_A1 &&
+                colorbufferFormat != GL_BGRA8_EXT &&
+                colorbufferFormat != GL_RGBA8_OES)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
+          case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
+            if (context->getExtensions().textureCompressionDXT1)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
+            if (context->getExtensions().textureCompressionDXT3)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
+            if (context->getExtensions().textureCompressionDXT5)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+            break;
+          case GL_DEPTH_COMPONENT:
+          case GL_DEPTH_COMPONENT16:
+          case GL_DEPTH_COMPONENT32_OES:
+          case GL_DEPTH_STENCIL_OES:
+          case GL_DEPTH24_STENCIL8_OES:
+            if (context->getExtensions().depthTextures)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+            else
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+          default:
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+    }
+
+    // If width or height is zero, it is a no-op.  Return false without setting an error.
+    return (width > 0 && height > 0);
+}
+
+bool ValidateES2TexStorageParameters(Context *context, GLenum target, GLsizei levels, GLenum internalformat,
+                                     GLsizei width, GLsizei height)
+{
+    if (target != GL_TEXTURE_2D && target != GL_TEXTURE_CUBE_MAP)
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (width < 1 || height < 1 || levels < 1)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (target == GL_TEXTURE_CUBE_MAP && width != height)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (levels != 1 && levels != gl::log2(std::max(width, height)) + 1)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+    if (formatInfo.format == GL_NONE || formatInfo.type == GL_NONE)
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    const gl::Caps &caps = context->getCaps();
+
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+        if (static_cast<GLuint>(width) > caps.max2DTextureSize ||
+            static_cast<GLuint>(height) > caps.max2DTextureSize)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+        break;
+      case GL_TEXTURE_CUBE_MAP:
+        if (static_cast<GLuint>(width) > caps.maxCubeMapTextureSize ||
+            static_cast<GLuint>(height) > caps.maxCubeMapTextureSize)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+        break;
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (levels != 1 && !context->getExtensions().textureNPOT)
+    {
+        if (!gl::isPow2(width) || !gl::isPow2(height))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    switch (internalformat)
+    {
+      case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
+      case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
+        if (!context->getExtensions().textureCompressionDXT1)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      case GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE:
+        if (!context->getExtensions().textureCompressionDXT3)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      case GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE:
+        if (!context->getExtensions().textureCompressionDXT5)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      case GL_RGBA32F_EXT:
+      case GL_RGB32F_EXT:
+      case GL_ALPHA32F_EXT:
+      case GL_LUMINANCE32F_EXT:
+      case GL_LUMINANCE_ALPHA32F_EXT:
+        if (!context->getExtensions().textureFloat)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      case GL_RGBA16F_EXT:
+      case GL_RGB16F_EXT:
+      case GL_ALPHA16F_EXT:
+      case GL_LUMINANCE16F_EXT:
+      case GL_LUMINANCE_ALPHA16F_EXT:
+        if (!context->getExtensions().textureHalfFloat)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      case GL_R8_EXT:
+      case GL_RG8_EXT:
+      case GL_R16F_EXT:
+      case GL_RG16F_EXT:
+      case GL_R32F_EXT:
+      case GL_RG32F_EXT:
+        if (!context->getExtensions().textureRG)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        break;
+      case GL_DEPTH_COMPONENT16:
+      case GL_DEPTH_COMPONENT32_OES:
+      case GL_DEPTH24_STENCIL8_OES:
+        if (!context->getExtensions().depthTextures)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+        if (target != GL_TEXTURE_2D)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+        // ANGLE_depth_texture only supports 1-level textures
+        if (levels != 1)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+        break;
+      default:
+        break;
+    }
+
+    gl::Texture *texture = NULL;
+    switch(target)
+    {
+      case GL_TEXTURE_2D:
+        texture = context->getTexture2D();
+        break;
+      case GL_TEXTURE_CUBE_MAP:
+        texture = context->getTextureCubeMap();
+        break;
+      default:
+        UNREACHABLE();
+    }
+
+    if (!texture || texture->id() == 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (texture->isImmutable())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+// check for combinations of format and type that are valid for ReadPixels
+bool ValidES2ReadFormatType(Context *context, GLenum format, GLenum type)
+{
+    switch (format)
+    {
+      case GL_RGBA:
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:
+            break;
+          default:
+            return false;
+        }
+        break;
+      case GL_BGRA_EXT:
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:
+          case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:
+          case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:
+            break;
+          default:
+            return false;
+        }
+        break;
+      case GL_RG_EXT:
+      case GL_RED_EXT:
+        if (!context->getExtensions().textureRG)
+        {
+            return false;
+        }
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:
+            break;
+          default:
+            return false;
+        }
+        break;
+
+      default:
+        return false;
+    }
+    return true;
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/validationES2.h b/src/3rdparty/angle/src/libGLESv2/validationES2.h
new file mode 100644
index 0000000000..53a0b630ea
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/validationES2.h
@@ -0,0 +1,34 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// validationES2.h: Validation functions for OpenGL ES 2.0 entry point parameters
+
+#ifndef LIBGLESV2_VALIDATION_ES2_H
+#define LIBGLESV2_VALIDATION_ES2_H
+
+#include <GLES2/gl2.h>
+
+namespace gl
+{
+
+class Context;
+
+bool ValidateES2TexImageParameters(Context *context, GLenum target, GLint level, GLenum internalformat, bool isCompressed, bool isSubImage,
+                                   GLint xoffset, GLint yoffset, GLsizei width, GLsizei height,
+                                   GLint border, GLenum format, GLenum type, const GLvoid *pixels);
+
+bool ValidateES2CopyTexImageParameters(Context* context, GLenum target, GLint level, GLenum internalformat, bool isSubImage,
+                                       GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height,
+                                       GLint border);
+
+bool ValidateES2TexStorageParameters(Context *context, GLenum target, GLsizei levels, GLenum internalformat,
+                                     GLsizei width, GLsizei height);
+
+bool ValidES2ReadFormatType(Context *context, GLenum format, GLenum type);
+
+}
+
+#endif // LIBGLESV2_VALIDATION_ES2_H
diff --git a/src/3rdparty/angle/src/libGLESv2/validationES3.cpp b/src/3rdparty/angle/src/libGLESv2/validationES3.cpp
new file mode 100644
index 0000000000..251c6ad2c4
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/validationES3.cpp
@@ -0,0 +1,1281 @@
+//
+// Copyright (c) 2013-2014 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// validationES3.cpp: Validation functions for OpenGL ES 3.0 entry point parameters
+
+#include "libGLESv2/validationES3.h"
+#include "libGLESv2/validationES.h"
+#include "libGLESv2/Context.h"
+#include "libGLESv2/Texture.h"
+#include "libGLESv2/Framebuffer.h"
+#include "libGLESv2/Renderbuffer.h"
+#include "libGLESv2/formatutils.h"
+#include "libGLESv2/main.h"
+#include "libGLESv2/FramebufferAttachment.h"
+
+#include "common/mathutil.h"
+
+namespace gl
+{
+
+struct ES3FormatCombination
+{
+    GLenum internalFormat;
+    GLenum format;
+    GLenum type;
+};
+
+bool operator<(const ES3FormatCombination& a, const ES3FormatCombination& b)
+{
+    return memcmp(&a, &b, sizeof(ES3FormatCombination)) < 0;
+}
+
+typedef std::set<ES3FormatCombination> ES3FormatCombinationSet;
+
+static inline void InsertES3FormatCombo(ES3FormatCombinationSet *set, GLenum internalFormat, GLenum format, GLenum type)
+{
+    ES3FormatCombination info;
+    info.internalFormat = internalFormat;
+    info.format = format;
+    info.type = type;
+    set->insert(info);
+}
+
+ES3FormatCombinationSet BuildES3FormatSet()
+{
+    ES3FormatCombinationSet set;
+
+    // Format combinations from ES 3.0.1 spec, table 3.2
+
+    //                        | Internal format      | Format            | Type                            |
+    //                        |                      |                   |                                 |
+    InsertES3FormatCombo(&set, GL_RGBA8,              GL_RGBA,            GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGB5_A1,            GL_RGBA,            GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGBA4,              GL_RGBA,            GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_SRGB8_ALPHA8,       GL_RGBA,            GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGBA8_SNORM,        GL_RGBA,            GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_RGBA4,              GL_RGBA,            GL_UNSIGNED_SHORT_4_4_4_4        );
+    InsertES3FormatCombo(&set, GL_RGB10_A2,           GL_RGBA,            GL_UNSIGNED_INT_2_10_10_10_REV   );
+    InsertES3FormatCombo(&set, GL_RGB5_A1,            GL_RGBA,            GL_UNSIGNED_INT_2_10_10_10_REV   );
+    InsertES3FormatCombo(&set, GL_RGB5_A1,            GL_RGBA,            GL_UNSIGNED_SHORT_5_5_5_1        );
+    InsertES3FormatCombo(&set, GL_RGBA16F,            GL_RGBA,            GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_RGBA16F,            GL_RGBA,            GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_RGBA32F,            GL_RGBA,            GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RGBA16F,            GL_RGBA,            GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RGBA8UI,            GL_RGBA_INTEGER,    GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGBA8I,             GL_RGBA_INTEGER,    GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_RGBA16UI,           GL_RGBA_INTEGER,    GL_UNSIGNED_SHORT                );
+    InsertES3FormatCombo(&set, GL_RGBA16I,            GL_RGBA_INTEGER,    GL_SHORT                         );
+    InsertES3FormatCombo(&set, GL_RGBA32UI,           GL_RGBA_INTEGER,    GL_UNSIGNED_INT                  );
+    InsertES3FormatCombo(&set, GL_RGBA32I,            GL_RGBA_INTEGER,    GL_INT                           );
+    InsertES3FormatCombo(&set, GL_RGB10_A2UI,         GL_RGBA_INTEGER,    GL_UNSIGNED_INT_2_10_10_10_REV   );
+    InsertES3FormatCombo(&set, GL_RGB8,               GL_RGB,             GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGB565,             GL_RGB,             GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_SRGB8,              GL_RGB,             GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGB8_SNORM,         GL_RGB,             GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_RGB565,             GL_RGB,             GL_UNSIGNED_SHORT_5_6_5          );
+    InsertES3FormatCombo(&set, GL_R11F_G11F_B10F,     GL_RGB,             GL_UNSIGNED_INT_10F_11F_11F_REV  );
+    InsertES3FormatCombo(&set, GL_RGB9_E5,            GL_RGB,             GL_UNSIGNED_INT_5_9_9_9_REV      );
+    InsertES3FormatCombo(&set, GL_RGB16F,             GL_RGB,             GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_RGB16F,             GL_RGB,             GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_R11F_G11F_B10F,     GL_RGB,             GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_R11F_G11F_B10F,     GL_RGB,             GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_RGB9_E5,            GL_RGB,             GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_RGB9_E5,            GL_RGB,             GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_RGB32F,             GL_RGB,             GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RGB16F,             GL_RGB,             GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_R11F_G11F_B10F,     GL_RGB,             GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RGB9_E5,            GL_RGB,             GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RGB8UI,             GL_RGB_INTEGER,     GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGB8I,              GL_RGB_INTEGER,     GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_RGB16UI,            GL_RGB_INTEGER,     GL_UNSIGNED_SHORT                );
+    InsertES3FormatCombo(&set, GL_RGB16I,             GL_RGB_INTEGER,     GL_SHORT                         );
+    InsertES3FormatCombo(&set, GL_RGB32UI,            GL_RGB_INTEGER,     GL_UNSIGNED_INT                  );
+    InsertES3FormatCombo(&set, GL_RGB32I,             GL_RGB_INTEGER,     GL_INT                           );
+    InsertES3FormatCombo(&set, GL_RG8,                GL_RG,              GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RG8_SNORM,          GL_RG,              GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_RG16F,              GL_RG,              GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_RG16F,              GL_RG,              GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_RG32F,              GL_RG,              GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RG16F,              GL_RG,              GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_RG8UI,              GL_RG_INTEGER,      GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RG8I,               GL_RG_INTEGER,      GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_RG16UI,             GL_RG_INTEGER,      GL_UNSIGNED_SHORT                );
+    InsertES3FormatCombo(&set, GL_RG16I,              GL_RG_INTEGER,      GL_SHORT                         );
+    InsertES3FormatCombo(&set, GL_RG32UI,             GL_RG_INTEGER,      GL_UNSIGNED_INT                  );
+    InsertES3FormatCombo(&set, GL_RG32I,              GL_RG_INTEGER,      GL_INT                           );
+    InsertES3FormatCombo(&set, GL_R8,                 GL_RED,             GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_R8_SNORM,           GL_RED,             GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_R16F,               GL_RED,             GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_R16F,               GL_RED,             GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_R32F,               GL_RED,             GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_R16F,               GL_RED,             GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_R8UI,               GL_RED_INTEGER,     GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_R8I,                GL_RED_INTEGER,     GL_BYTE                          );
+    InsertES3FormatCombo(&set, GL_R16UI,              GL_RED_INTEGER,     GL_UNSIGNED_SHORT                );
+    InsertES3FormatCombo(&set, GL_R16I,               GL_RED_INTEGER,     GL_SHORT                         );
+    InsertES3FormatCombo(&set, GL_R32UI,              GL_RED_INTEGER,     GL_UNSIGNED_INT                  );
+    InsertES3FormatCombo(&set, GL_R32I,               GL_RED_INTEGER,     GL_INT                           );
+
+    // Unsized formats
+    InsertES3FormatCombo(&set, GL_RGBA,               GL_RGBA,            GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGBA,               GL_RGBA,            GL_UNSIGNED_SHORT_4_4_4_4        );
+    InsertES3FormatCombo(&set, GL_RGBA,               GL_RGBA,            GL_UNSIGNED_SHORT_5_5_5_1        );
+    InsertES3FormatCombo(&set, GL_RGB,                GL_RGB,             GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_RGB,                GL_RGB,             GL_UNSIGNED_SHORT_5_6_5          );
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA,    GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_LUMINANCE,          GL_LUMINANCE,       GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_ALPHA,              GL_ALPHA,           GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_SRGB_ALPHA_EXT,     GL_SRGB_ALPHA_EXT,  GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_SRGB_EXT,           GL_SRGB_EXT,        GL_UNSIGNED_BYTE                 );
+
+    // Depth stencil formats
+    InsertES3FormatCombo(&set, GL_DEPTH_COMPONENT16,  GL_DEPTH_COMPONENT, GL_UNSIGNED_SHORT                );
+    InsertES3FormatCombo(&set, GL_DEPTH_COMPONENT24,  GL_DEPTH_COMPONENT, GL_UNSIGNED_INT                  );
+    InsertES3FormatCombo(&set, GL_DEPTH_COMPONENT16,  GL_DEPTH_COMPONENT, GL_UNSIGNED_INT                  );
+    InsertES3FormatCombo(&set, GL_DEPTH_COMPONENT32F, GL_DEPTH_COMPONENT, GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_DEPTH24_STENCIL8,   GL_DEPTH_STENCIL,   GL_UNSIGNED_INT_24_8             );
+    InsertES3FormatCombo(&set, GL_DEPTH32F_STENCIL8,  GL_DEPTH_STENCIL,   GL_FLOAT_32_UNSIGNED_INT_24_8_REV);
+
+    // From GL_EXT_sRGB
+    InsertES3FormatCombo(&set, GL_SRGB8_ALPHA8_EXT,   GL_SRGB_ALPHA_EXT, GL_UNSIGNED_BYTE                  );
+    InsertES3FormatCombo(&set, GL_SRGB8,              GL_SRGB_EXT,       GL_UNSIGNED_BYTE                  );
+
+    // From GL_OES_texture_float
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA,    GL_LUMINANCE_ALPHA, GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_LUMINANCE,          GL_LUMINANCE,       GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_ALPHA,              GL_ALPHA,           GL_FLOAT                         );
+
+    // From GL_OES_texture_half_float
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA,    GL_LUMINANCE_ALPHA, GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA,    GL_LUMINANCE_ALPHA, GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_LUMINANCE,          GL_LUMINANCE,       GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_LUMINANCE,          GL_LUMINANCE,       GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_ALPHA,              GL_ALPHA,           GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_ALPHA,              GL_ALPHA,           GL_HALF_FLOAT_OES                );
+
+    // From GL_EXT_texture_format_BGRA8888
+    InsertES3FormatCombo(&set, GL_BGRA_EXT,           GL_BGRA_EXT,        GL_UNSIGNED_BYTE                 );
+
+    // From GL_EXT_texture_storage
+    //                    | Internal format          | Format            | Type                            |
+    //                    |                          |                   |                                 |
+    InsertES3FormatCombo(&set, GL_ALPHA8_EXT,             GL_ALPHA,           GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_LUMINANCE8_EXT,         GL_LUMINANCE,       GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_LUMINANCE8_ALPHA8_EXT,  GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_ALPHA32F_EXT,           GL_ALPHA,           GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_LUMINANCE32F_EXT,       GL_LUMINANCE,       GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA32F_EXT, GL_LUMINANCE_ALPHA, GL_FLOAT                         );
+    InsertES3FormatCombo(&set, GL_ALPHA16F_EXT,           GL_ALPHA,           GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_ALPHA16F_EXT,           GL_ALPHA,           GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_LUMINANCE16F_EXT,       GL_LUMINANCE,       GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_LUMINANCE16F_EXT,       GL_LUMINANCE,       GL_HALF_FLOAT_OES                );
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA16F_EXT, GL_LUMINANCE_ALPHA, GL_HALF_FLOAT                    );
+    InsertES3FormatCombo(&set, GL_LUMINANCE_ALPHA16F_EXT, GL_LUMINANCE_ALPHA, GL_HALF_FLOAT_OES                );
+
+    // From GL_EXT_texture_storage and GL_EXT_texture_format_BGRA8888
+    InsertES3FormatCombo(&set, GL_BGRA8_EXT,              GL_BGRA_EXT,        GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_BGRA4_ANGLEX,           GL_BGRA_EXT,        GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT);
+    InsertES3FormatCombo(&set, GL_BGRA4_ANGLEX,           GL_BGRA_EXT,        GL_UNSIGNED_BYTE                 );
+    InsertES3FormatCombo(&set, GL_BGR5_A1_ANGLEX,         GL_BGRA_EXT,        GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT);
+    InsertES3FormatCombo(&set, GL_BGR5_A1_ANGLEX,         GL_BGRA_EXT,        GL_UNSIGNED_BYTE                 );
+
+    // From GL_ANGLE_depth_texture
+    InsertES3FormatCombo(&set, GL_DEPTH_COMPONENT32_OES,  GL_DEPTH_COMPONENT, GL_UNSIGNED_INT_24_8_OES         );
+
+    // Compressed formats
+    // From ES 3.0.1 spec, table 3.16
+    //                    | Internal format                             | Format                                      | Type           |
+    //                    |                                             |                                             |                |
+    InsertES3FormatCombo(&set, GL_COMPRESSED_R11_EAC,                        GL_COMPRESSED_R11_EAC,                        GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_R11_EAC,                        GL_COMPRESSED_R11_EAC,                        GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_SIGNED_R11_EAC,                 GL_COMPRESSED_SIGNED_R11_EAC,                 GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RG11_EAC,                       GL_COMPRESSED_RG11_EAC,                       GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_SIGNED_RG11_EAC,                GL_COMPRESSED_SIGNED_RG11_EAC,                GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGB8_ETC2,                      GL_COMPRESSED_RGB8_ETC2,                      GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_SRGB8_ETC2,                     GL_COMPRESSED_SRGB8_ETC2,                     GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2,  GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2,  GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2, GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2, GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGBA8_ETC2_EAC,                 GL_COMPRESSED_RGBA8_ETC2_EAC,                 GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC,          GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC,          GL_UNSIGNED_BYTE);
+
+
+    // From GL_EXT_texture_compression_dxt1
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGB_S3TC_DXT1_EXT,              GL_COMPRESSED_RGB_S3TC_DXT1_EXT,              GL_UNSIGNED_BYTE);
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,             GL_COMPRESSED_RGBA_S3TC_DXT1_EXT,             GL_UNSIGNED_BYTE);
+
+    // From GL_ANGLE_texture_compression_dxt3
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE,           GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE,           GL_UNSIGNED_BYTE);
+
+    // From GL_ANGLE_texture_compression_dxt5
+    InsertES3FormatCombo(&set, GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE,           GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE,           GL_UNSIGNED_BYTE);
+
+    return set;
+}
+
+static bool ValidateTexImageFormatCombination(gl::Context *context, GLenum internalFormat, GLenum format, GLenum type)
+{
+    // Note: dEQP 2013.4 expects an INVALID_VALUE error for TexImage3D with an invalid
+    // internal format. (dEQP-GLES3.functional.negative_api.texture.teximage3d)
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalFormat);
+    if (!formatInfo.textureSupport(context->getClientVersion(), context->getExtensions()))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    // The type and format are valid if any supported internal format has that type and format
+    bool formatSupported = false;
+    bool typeSupported = false;
+
+    static const ES3FormatCombinationSet es3FormatSet = BuildES3FormatSet();
+    for (ES3FormatCombinationSet::const_iterator i = es3FormatSet.begin(); i != es3FormatSet.end(); i++)
+    {
+        if (i->format == format || i->type == type)
+        {
+            const gl::InternalFormat &info = gl::GetInternalFormatInfo(i->internalFormat);
+            bool supported = info.textureSupport(context->getClientVersion(), context->getExtensions());
+            if (supported && i->type == type)
+            {
+                typeSupported = true;
+            }
+            if (supported && i->format == format)
+            {
+                formatSupported = true;
+            }
+
+            // Early-out if both type and format are supported now
+            if (typeSupported && formatSupported)
+            {
+                break;
+            }
+        }
+    }
+
+    if (!typeSupported || !formatSupported)
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    // Check if this is a valid format combination to load texture data
+    ES3FormatCombination searchFormat;
+    searchFormat.internalFormat = internalFormat;
+    searchFormat.format = format;
+    searchFormat.type = type;
+
+    if (es3FormatSet.find(searchFormat) == es3FormatSet.end())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateES3TexImageParameters(Context *context, GLenum target, GLint level, GLenum internalformat, bool isCompressed, bool isSubImage,
+                                   GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                                   GLint border, GLenum format, GLenum type, const GLvoid *pixels)
+{
+    if (!ValidTexture2DDestinationTarget(context, target))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    // Validate image size
+    if (!ValidImageSize(context, target, level, width, height, depth))
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    // Verify zero border
+    if (border != 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (xoffset < 0 || yoffset < 0 || zoffset < 0 ||
+        std::numeric_limits<GLsizei>::max() - xoffset < width ||
+        std::numeric_limits<GLsizei>::max() - yoffset < height ||
+        std::numeric_limits<GLsizei>::max() - zoffset < depth)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    const gl::Caps &caps = context->getCaps();
+
+    gl::Texture *texture = NULL;
+    bool textureCompressed = false;
+    GLenum textureInternalFormat = GL_NONE;
+    GLint textureLevelWidth = 0;
+    GLint textureLevelHeight = 0;
+    GLint textureLevelDepth = 0;
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+        {
+            if (static_cast<GLuint>(width) > (caps.max2DTextureSize >> level) ||
+                static_cast<GLuint>(height) > (caps.max2DTextureSize >> level))
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            gl::Texture2D *texture2d = context->getTexture2D();
+            if (texture2d)
+            {
+                textureCompressed = texture2d->isCompressed(level);
+                textureInternalFormat = texture2d->getInternalFormat(level);
+                textureLevelWidth = texture2d->getWidth(level);
+                textureLevelHeight = texture2d->getHeight(level);
+                textureLevelDepth = 1;
+                texture = texture2d;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_X:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_X:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Y:
+      case GL_TEXTURE_CUBE_MAP_POSITIVE_Z:
+      case GL_TEXTURE_CUBE_MAP_NEGATIVE_Z:
+        {
+            if (!isSubImage && width != height)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            if (static_cast<GLuint>(width) > (caps.maxCubeMapTextureSize >> level))
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            gl::TextureCubeMap *textureCube = context->getTextureCubeMap();
+            if (textureCube)
+            {
+                textureCompressed = textureCube->isCompressed(target, level);
+                textureInternalFormat = textureCube->getInternalFormat(target, level);
+                textureLevelWidth = textureCube->getWidth(target, level);
+                textureLevelHeight = textureCube->getHeight(target, level);
+                textureLevelDepth = 1;
+                texture = textureCube;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_3D:
+        {
+            if (static_cast<GLuint>(width) > (caps.max3DTextureSize >> level) ||
+                static_cast<GLuint>(height) > (caps.max3DTextureSize >> level) ||
+                static_cast<GLuint>(depth) > (caps.max3DTextureSize >> level))
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            gl::Texture3D *texture3d = context->getTexture3D();
+            if (texture3d)
+            {
+                textureCompressed = texture3d->isCompressed(level);
+                textureInternalFormat = texture3d->getInternalFormat(level);
+                textureLevelWidth = texture3d->getWidth(level);
+                textureLevelHeight = texture3d->getHeight(level);
+                textureLevelDepth = texture3d->getDepth(level);
+                texture = texture3d;
+            }
+        }
+        break;
+
+        case GL_TEXTURE_2D_ARRAY:
+          {
+              if (static_cast<GLuint>(width) > (caps.max2DTextureSize >> level) ||
+                  static_cast<GLuint>(height) > (caps.max2DTextureSize >> level) ||
+                  static_cast<GLuint>(depth) > (caps.maxArrayTextureLayers >> level))
+              {
+                  context->recordError(Error(GL_INVALID_VALUE));
+                  return false;
+              }
+
+              gl::Texture2DArray *texture2darray = context->getTexture2DArray();
+              if (texture2darray)
+              {
+                  textureCompressed = texture2darray->isCompressed(level);
+                  textureInternalFormat = texture2darray->getInternalFormat(level);
+                  textureLevelWidth = texture2darray->getWidth(level);
+                  textureLevelHeight = texture2darray->getHeight(level);
+                  textureLevelDepth = texture2darray->getLayers(level);
+                  texture = texture2darray;
+              }
+          }
+          break;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (!texture)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (texture->isImmutable() && !isSubImage)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    // Validate texture formats
+    GLenum actualInternalFormat = isSubImage ? textureInternalFormat : internalformat;
+    const gl::InternalFormat &actualFormatInfo = gl::GetInternalFormatInfo(actualInternalFormat);
+    if (isCompressed)
+    {
+        if (!ValidCompressedImageSize(context, actualInternalFormat, width, height))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        if (!actualFormatInfo.compressed)
+        {
+            context->recordError(Error(GL_INVALID_ENUM));
+            return false;
+        }
+
+        if (target == GL_TEXTURE_3D)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+    else
+    {
+        if (!ValidateTexImageFormatCombination(context, actualInternalFormat, format, type))
+        {
+            return false;
+        }
+
+        if (target == GL_TEXTURE_3D && (format == GL_DEPTH_COMPONENT || format == GL_DEPTH_STENCIL))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    // Validate sub image parameters
+    if (isSubImage)
+    {
+        if (isCompressed != textureCompressed)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        if (isCompressed)
+        {
+            if ((width % 4 != 0 && width != textureLevelWidth) ||
+                (height % 4 != 0 && height != textureLevelHeight))
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+        }
+
+        if (width == 0 || height == 0 || depth == 0)
+        {
+            return false;
+        }
+
+        if (xoffset < 0 || yoffset < 0 || zoffset < 0)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+
+        if (std::numeric_limits<GLsizei>::max() - xoffset < width ||
+            std::numeric_limits<GLsizei>::max() - yoffset < height ||
+            std::numeric_limits<GLsizei>::max() - zoffset < depth)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+
+        if (xoffset + width > textureLevelWidth ||
+            yoffset + height > textureLevelHeight ||
+            zoffset + depth > textureLevelDepth)
+        {
+            context->recordError(Error(GL_INVALID_VALUE));
+            return false;
+        }
+    }
+
+    // Check for pixel unpack buffer related API errors
+    gl::Buffer *pixelUnpackBuffer = context->getState().getTargetBuffer(GL_PIXEL_UNPACK_BUFFER);
+    if (pixelUnpackBuffer != NULL)
+    {
+        // ...the data would be unpacked from the buffer object such that the memory reads required
+        // would exceed the data store size.
+        size_t widthSize = static_cast<size_t>(width);
+        size_t heightSize = static_cast<size_t>(height);
+        size_t depthSize = static_cast<size_t>(depth);
+        GLenum sizedFormat = GetSizedInternalFormat(actualInternalFormat, type);
+
+        size_t pixelBytes = static_cast<size_t>(gl::GetInternalFormatInfo(sizedFormat).pixelBytes);
+
+        if (!rx::IsUnsignedMultiplicationSafe(widthSize, heightSize) ||
+            !rx::IsUnsignedMultiplicationSafe(widthSize * heightSize, depthSize) ||
+            !rx::IsUnsignedMultiplicationSafe(widthSize * heightSize * depthSize, pixelBytes))
+        {
+            // Overflow past the end of the buffer
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        size_t copyBytes = widthSize * heightSize * depthSize * pixelBytes;
+        size_t offset = reinterpret_cast<size_t>(pixels);
+
+        if (!rx::IsUnsignedAdditionSafe(offset, copyBytes) ||
+            ((offset + copyBytes) > static_cast<size_t>(pixelUnpackBuffer->getSize())))
+        {
+            // Overflow past the end of the buffer
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        // ...data is not evenly divisible into the number of bytes needed to store in memory a datum
+        // indicated by type.
+        size_t dataBytesPerPixel = static_cast<size_t>(gl::GetTypeInfo(type).bytes);
+
+        if ((offset % dataBytesPerPixel) != 0)
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+
+        // ...the buffer object's data store is currently mapped.
+        if (pixelUnpackBuffer->isMapped())
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    return true;
+}
+
+struct EffectiveInternalFormatInfo
+{
+    GLenum mEffectiveFormat;
+    GLenum mDestFormat;
+    GLuint mMinRedBits;
+    GLuint mMaxRedBits;
+    GLuint mMinGreenBits;
+    GLuint mMaxGreenBits;
+    GLuint mMinBlueBits;
+    GLuint mMaxBlueBits;
+    GLuint mMinAlphaBits;
+    GLuint mMaxAlphaBits;
+
+    EffectiveInternalFormatInfo(GLenum effectiveFormat, GLenum destFormat, GLuint minRedBits, GLuint maxRedBits,
+                                GLuint minGreenBits, GLuint maxGreenBits, GLuint minBlueBits, GLuint maxBlueBits,
+                                GLuint minAlphaBits, GLuint maxAlphaBits)
+        : mEffectiveFormat(effectiveFormat), mDestFormat(destFormat), mMinRedBits(minRedBits),
+          mMaxRedBits(maxRedBits), mMinGreenBits(minGreenBits), mMaxGreenBits(maxGreenBits),
+          mMinBlueBits(minBlueBits), mMaxBlueBits(maxBlueBits), mMinAlphaBits(minAlphaBits),
+          mMaxAlphaBits(maxAlphaBits) {};
+};
+
+typedef std::vector<EffectiveInternalFormatInfo> EffectiveInternalFormatList;
+
+static EffectiveInternalFormatList BuildSizedEffectiveInternalFormatList()
+{
+    EffectiveInternalFormatList list;
+
+    // OpenGL ES 3.0.3 Specification, Table 3.17, pg 141: Effective internal format coresponding to destination internal format and
+    //                                                    linear source buffer component sizes.
+    //                                                                            | Source channel min/max sizes |
+    //                                         Effective Internal Format |  N/A   |  R   |  G   |  B   |  A      |
+    list.push_back(EffectiveInternalFormatInfo(GL_ALPHA8_EXT,              GL_NONE, 0,  0, 0,  0, 0,  0, 1, 8));
+    list.push_back(EffectiveInternalFormatInfo(GL_R8,                      GL_NONE, 1,  8, 0,  0, 0,  0, 0, 0));
+    list.push_back(EffectiveInternalFormatInfo(GL_RG8,                     GL_NONE, 1,  8, 1,  8, 0,  0, 0, 0));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB565,                  GL_NONE, 1,  5, 1,  6, 1,  5, 0, 0));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB8,                    GL_NONE, 6,  8, 7,  8, 6,  8, 0, 0));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGBA4,                   GL_NONE, 1,  4, 1,  4, 1,  4, 1, 4));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB5_A1,                 GL_NONE, 5,  5, 5,  5, 5,  5, 1, 1));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGBA8,                   GL_NONE, 5,  8, 5,  8, 5,  8, 2, 8));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB10_A2,                GL_NONE, 9, 10, 9, 10, 9, 10, 2, 2));
+
+    return list;
+}
+
+static EffectiveInternalFormatList BuildUnsizedEffectiveInternalFormatList()
+{
+    EffectiveInternalFormatList list;
+
+    // OpenGL ES 3.0.3 Specification, Table 3.17, pg 141: Effective internal format coresponding to destination internal format and
+    //                                                    linear source buffer component sizes.
+    //                                                                                        |          Source channel min/max sizes            |
+    //                                         Effective Internal Format |    Dest Format     |     R     |      G     |      B     |      A     |
+    list.push_back(EffectiveInternalFormatInfo(GL_ALPHA8_EXT,              GL_ALPHA,           0, UINT_MAX, 0, UINT_MAX, 0, UINT_MAX, 1,        8));
+    list.push_back(EffectiveInternalFormatInfo(GL_LUMINANCE8_EXT,          GL_LUMINANCE,       1,        8, 0, UINT_MAX, 0, UINT_MAX, 0, UINT_MAX));
+    list.push_back(EffectiveInternalFormatInfo(GL_LUMINANCE8_ALPHA8_EXT,   GL_LUMINANCE_ALPHA, 1,        8, 0, UINT_MAX, 0, UINT_MAX, 1,        8));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB565,                  GL_RGB,             1,        5, 1,        6, 1,        5, 0, UINT_MAX));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB8,                    GL_RGB,             6,        8, 7,        8, 6,        8, 0, UINT_MAX));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGBA4,                   GL_RGBA,            1,        4, 1,        4, 1,        4, 1,        4));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGB5_A1,                 GL_RGBA,            5,        5, 5,        5, 5,        5, 1,        1));
+    list.push_back(EffectiveInternalFormatInfo(GL_RGBA8,                   GL_RGBA,            5,        8, 5,        8, 5,        8, 5,        8));
+
+    return list;
+}
+
+static bool GetEffectiveInternalFormat(const InternalFormat &srcFormat, const InternalFormat &destFormat,
+                                       GLenum *outEffectiveFormat)
+{
+    const EffectiveInternalFormatList *list = NULL;
+    GLenum targetFormat = GL_NONE;
+
+    if (destFormat.pixelBytes > 0)
+    {
+        static const EffectiveInternalFormatList sizedList = BuildSizedEffectiveInternalFormatList();
+        list = &sizedList;
+    }
+    else
+    {
+        static const EffectiveInternalFormatList unsizedList = BuildUnsizedEffectiveInternalFormatList();
+        list = &unsizedList;
+        targetFormat = destFormat.format;
+    }
+
+    for (size_t curFormat = 0; curFormat < list->size(); ++curFormat)
+    {
+        const EffectiveInternalFormatInfo& formatInfo = list->at(curFormat);
+        if ((formatInfo.mDestFormat == targetFormat) &&
+            (formatInfo.mMinRedBits   <= srcFormat.redBits   && formatInfo.mMaxRedBits   >= srcFormat.redBits)   &&
+            (formatInfo.mMinGreenBits <= srcFormat.greenBits && formatInfo.mMaxGreenBits >= srcFormat.greenBits) &&
+            (formatInfo.mMinBlueBits  <= srcFormat.blueBits  && formatInfo.mMaxBlueBits  >= srcFormat.blueBits)  &&
+            (formatInfo.mMinAlphaBits <= srcFormat.alphaBits && formatInfo.mMaxAlphaBits >= srcFormat.alphaBits))
+        {
+            *outEffectiveFormat = formatInfo.mEffectiveFormat;
+            return true;
+        }
+    }
+
+    return false;
+}
+
+struct CopyConversion
+{
+    GLenum mTextureFormat;
+    GLenum mFramebufferFormat;
+
+    CopyConversion(GLenum textureFormat, GLenum framebufferFormat)
+        : mTextureFormat(textureFormat), mFramebufferFormat(framebufferFormat) { }
+
+    bool operator<(const CopyConversion& other) const
+    {
+        return memcmp(this, &other, sizeof(CopyConversion)) < 0;
+    }
+};
+
+typedef std::set<CopyConversion> CopyConversionSet;
+
+static CopyConversionSet BuildValidES3CopyTexImageCombinations()
+{
+    CopyConversionSet set;
+
+    // From ES 3.0.1 spec, table 3.15
+    set.insert(CopyConversion(GL_ALPHA, GL_RGBA));
+    set.insert(CopyConversion(GL_LUMINANCE, GL_RED));
+    set.insert(CopyConversion(GL_LUMINANCE, GL_RG));
+    set.insert(CopyConversion(GL_LUMINANCE, GL_RGB));
+    set.insert(CopyConversion(GL_LUMINANCE, GL_RGBA));
+    set.insert(CopyConversion(GL_LUMINANCE_ALPHA, GL_RGBA));
+    set.insert(CopyConversion(GL_RED, GL_RED));
+    set.insert(CopyConversion(GL_RED, GL_RG));
+    set.insert(CopyConversion(GL_RED, GL_RGB));
+    set.insert(CopyConversion(GL_RED, GL_RGBA));
+    set.insert(CopyConversion(GL_RG, GL_RG));
+    set.insert(CopyConversion(GL_RG, GL_RGB));
+    set.insert(CopyConversion(GL_RG, GL_RGBA));
+    set.insert(CopyConversion(GL_RGB, GL_RGB));
+    set.insert(CopyConversion(GL_RGB, GL_RGBA));
+    set.insert(CopyConversion(GL_RGBA, GL_RGBA));
+
+    // Necessary for ANGLE back-buffers
+    set.insert(CopyConversion(GL_ALPHA, GL_BGRA_EXT));
+    set.insert(CopyConversion(GL_LUMINANCE, GL_BGRA_EXT));
+    set.insert(CopyConversion(GL_LUMINANCE_ALPHA, GL_BGRA_EXT));
+    set.insert(CopyConversion(GL_RED, GL_BGRA_EXT));
+    set.insert(CopyConversion(GL_RG, GL_BGRA_EXT));
+    set.insert(CopyConversion(GL_RGB, GL_BGRA_EXT));
+    set.insert(CopyConversion(GL_RGBA, GL_BGRA_EXT));
+
+    set.insert(CopyConversion(GL_RED_INTEGER, GL_RED_INTEGER));
+    set.insert(CopyConversion(GL_RED_INTEGER, GL_RG_INTEGER));
+    set.insert(CopyConversion(GL_RED_INTEGER, GL_RGB_INTEGER));
+    set.insert(CopyConversion(GL_RED_INTEGER, GL_RGBA_INTEGER));
+    set.insert(CopyConversion(GL_RG_INTEGER, GL_RG_INTEGER));
+    set.insert(CopyConversion(GL_RG_INTEGER, GL_RGB_INTEGER));
+    set.insert(CopyConversion(GL_RG_INTEGER, GL_RGBA_INTEGER));
+    set.insert(CopyConversion(GL_RGB_INTEGER, GL_RGB_INTEGER));
+    set.insert(CopyConversion(GL_RGB_INTEGER, GL_RGBA_INTEGER));
+    set.insert(CopyConversion(GL_RGBA_INTEGER, GL_RGBA_INTEGER));
+
+    return set;
+}
+
+static bool IsValidES3CopyTexImageCombination(GLenum textureInternalFormat, GLenum frameBufferInternalFormat, GLuint readBufferHandle)
+{
+    const InternalFormat &textureInternalFormatInfo = GetInternalFormatInfo(textureInternalFormat);
+    const InternalFormat &framebufferInternalFormatInfo = GetInternalFormatInfo(frameBufferInternalFormat);
+
+    static const CopyConversionSet conversionSet = BuildValidES3CopyTexImageCombinations();
+    if (conversionSet.find(CopyConversion(textureInternalFormatInfo.format, framebufferInternalFormatInfo.format)) != conversionSet.end())
+    {
+        // Section 3.8.5 of the GLES 3.0.3 spec states that source and destination formats
+        // must both be signed, unsigned, or fixed point and both source and destinations
+        // must be either both SRGB or both not SRGB. EXT_color_buffer_float adds allowed
+        // conversion between fixed and floating point.
+
+        if ((textureInternalFormatInfo.colorEncoding == GL_SRGB) != (framebufferInternalFormatInfo.colorEncoding == GL_SRGB))
+        {
+            return false;
+        }
+
+        if (((textureInternalFormatInfo.componentType == GL_INT)          != (framebufferInternalFormatInfo.componentType == GL_INT         )) ||
+            ((textureInternalFormatInfo.componentType == GL_UNSIGNED_INT) != (framebufferInternalFormatInfo.componentType == GL_UNSIGNED_INT)))
+        {
+            return false;
+        }
+
+        if ((textureInternalFormatInfo.componentType == GL_UNSIGNED_NORMALIZED ||
+             textureInternalFormatInfo.componentType == GL_SIGNED_NORMALIZED ||
+             textureInternalFormatInfo.componentType == GL_FLOAT) &&
+            !(framebufferInternalFormatInfo.componentType == GL_UNSIGNED_NORMALIZED ||
+              framebufferInternalFormatInfo.componentType == GL_SIGNED_NORMALIZED ||
+              framebufferInternalFormatInfo.componentType == GL_FLOAT))
+        {
+            return false;
+        }
+
+        // GLES specification 3.0.3, sec 3.8.5, pg 139-140:
+        // The effective internal format of the source buffer is determined with the following rules applied in order:
+        //    * If the source buffer is a texture or renderbuffer that was created with a sized internal format then the
+        //      effective internal format is the source buffer's sized internal format.
+        //    * If the source buffer is a texture that was created with an unsized base internal format, then the
+        //      effective internal format is the source image array's effective internal format, as specified by table
+        //      3.12, which is determined from the <format> and <type> that were used when the source image array was
+        //      specified by TexImage*.
+        //    * Otherwise the effective internal format is determined by the row in table 3.17 or 3.18 where
+        //      Destination Internal Format matches internalformat and where the [source channel sizes] are consistent
+        //      with the values of the source buffer's [channel sizes]. Table 3.17 is used if the
+        //      FRAMEBUFFER_ATTACHMENT_ENCODING is LINEAR and table 3.18 is used if the FRAMEBUFFER_ATTACHMENT_ENCODING
+        //      is SRGB.
+        const InternalFormat *sourceEffectiveFormat = NULL;
+        if (readBufferHandle != 0)
+        {
+            // Not the default framebuffer, therefore the read buffer must be a user-created texture or renderbuffer
+            if (framebufferInternalFormatInfo.pixelBytes > 0)
+            {
+                sourceEffectiveFormat = &framebufferInternalFormatInfo;
+            }
+            else
+            {
+                // Renderbuffers cannot be created with an unsized internal format, so this must be an unsized-format
+                // texture. We can use the same table we use when creating textures to get its effective sized format.
+                const FormatType &typeInfo = GetFormatTypeInfo(framebufferInternalFormatInfo.format, framebufferInternalFormatInfo.type);
+                sourceEffectiveFormat = &GetInternalFormatInfo(typeInfo.internalFormat);
+            }
+        }
+        else
+        {
+            // The effective internal format must be derived from the source framebuffer's channel sizes.
+            // This is done in GetEffectiveInternalFormat for linear buffers (table 3.17)
+            if (framebufferInternalFormatInfo.colorEncoding == GL_LINEAR)
+            {
+                GLenum effectiveFormat;
+                if (GetEffectiveInternalFormat(framebufferInternalFormatInfo, textureInternalFormatInfo, &effectiveFormat))
+                {
+                    sourceEffectiveFormat = &GetInternalFormatInfo(effectiveFormat);
+                }
+                else
+                {
+                    return false;
+                }
+            }
+            else if (framebufferInternalFormatInfo.colorEncoding == GL_SRGB)
+            {
+                // SRGB buffers can only be copied to sized format destinations according to table 3.18
+                if ((textureInternalFormatInfo.pixelBytes > 0) &&
+                    (framebufferInternalFormatInfo.redBits   >= 1 && framebufferInternalFormatInfo.redBits   <= 8) &&
+                    (framebufferInternalFormatInfo.greenBits >= 1 && framebufferInternalFormatInfo.greenBits <= 8) &&
+                    (framebufferInternalFormatInfo.blueBits  >= 1 && framebufferInternalFormatInfo.blueBits  <= 8) &&
+                    (framebufferInternalFormatInfo.alphaBits >= 1 && framebufferInternalFormatInfo.alphaBits <= 8))
+                {
+                    sourceEffectiveFormat = &GetInternalFormatInfo(GL_SRGB8_ALPHA8);
+                }
+                else
+                {
+                    return false;
+                }
+            }
+            else
+            {
+                UNREACHABLE();
+                return false;
+            }
+        }
+
+        if (textureInternalFormatInfo.pixelBytes > 0)
+        {
+            // Section 3.8.5 of the GLES 3.0.3 spec, pg 139, requires that, if the destination format is sized,
+            // component sizes of the source and destination formats must exactly match
+            if (textureInternalFormatInfo.redBits   != sourceEffectiveFormat->redBits   ||
+                textureInternalFormatInfo.greenBits != sourceEffectiveFormat->greenBits ||
+                textureInternalFormatInfo.blueBits  != sourceEffectiveFormat->blueBits  ||
+                textureInternalFormatInfo.alphaBits != sourceEffectiveFormat->alphaBits)
+            {
+                return false;
+            }
+        }
+
+
+        return true; // A conversion function exists, and no rule in the specification has precluded conversion
+                     // between these formats.
+    }
+
+    return false;
+}
+
+bool ValidateES3CopyTexImageParameters(Context *context, GLenum target, GLint level, GLenum internalformat,
+                                       bool isSubImage, GLint xoffset, GLint yoffset, GLint zoffset,
+                                       GLint x, GLint y, GLsizei width, GLsizei height, GLint border)
+{
+    GLenum textureInternalFormat;
+    if (!ValidateCopyTexImageParametersBase(context, target, level, internalformat, isSubImage,
+                                            xoffset, yoffset, zoffset, x, y, width, height,
+                                            border, &textureInternalFormat))
+    {
+        return false;
+    }
+
+    gl::Framebuffer *framebuffer = context->getState().getReadFramebuffer();
+
+    if (framebuffer->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    {
+        context->recordError(Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+        return false;
+    }
+
+    if (context->getState().getReadFramebuffer()->id() != 0 && framebuffer->getSamples() != 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    gl::FramebufferAttachment *source = framebuffer->getReadColorbuffer();
+    GLenum colorbufferInternalFormat = source->getInternalFormat();
+
+    if (isSubImage)
+    {
+        if (!IsValidES3CopyTexImageCombination(textureInternalFormat, colorbufferInternalFormat,
+                                               context->getState().getReadFramebuffer()->id()))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+    else
+    {
+        if (!gl::IsValidES3CopyTexImageCombination(internalformat, colorbufferInternalFormat,
+                                                context->getState().getReadFramebuffer()->id()))
+        {
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    // If width or height is zero, it is a no-op.  Return false without setting an error.
+    return (width > 0 && height > 0);
+}
+
+bool ValidateES3TexStorageParameters(Context *context, GLenum target, GLsizei levels, GLenum internalformat,
+                                     GLsizei width, GLsizei height, GLsizei depth)
+{
+    if (width < 1 || height < 1 || depth < 1 || levels < 1)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (levels > gl::log2(std::max(std::max(width, height), depth)) + 1)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::Caps &caps = context->getCaps();
+
+    gl::Texture *texture = NULL;
+    switch (target)
+    {
+      case GL_TEXTURE_2D:
+        {
+            texture = context->getTexture2D();
+
+            if (static_cast<GLuint>(width) > caps.max2DTextureSize ||
+                static_cast<GLuint>(height) > caps.max2DTextureSize)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_CUBE_MAP:
+        {
+            texture = context->getTextureCubeMap();
+
+            if (width != height)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+
+            if (static_cast<GLuint>(width) > caps.maxCubeMapTextureSize)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_3D:
+        {
+            texture = context->getTexture3D();
+
+            if (static_cast<GLuint>(width) > caps.max3DTextureSize ||
+                static_cast<GLuint>(height) > caps.max3DTextureSize ||
+                static_cast<GLuint>(depth) > caps.max3DTextureSize)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+        }
+        break;
+
+      case GL_TEXTURE_2D_ARRAY:
+        {
+            texture = context->getTexture2DArray();
+
+            if (static_cast<GLuint>(width) > caps.max2DTextureSize ||
+                static_cast<GLuint>(height) > caps.max2DTextureSize ||
+                static_cast<GLuint>(depth) > caps.maxArrayTextureLayers)
+            {
+                context->recordError(Error(GL_INVALID_VALUE));
+                return false;
+            }
+        }
+        break;
+
+      default:
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (!texture || texture->id() == 0)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (texture->isImmutable())
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(internalformat);
+    if (!formatInfo.textureSupport(context->getClientVersion(), context->getExtensions()))
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    if (formatInfo.pixelBytes == 0)
+    {
+        context->recordError(Error(GL_INVALID_ENUM));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateFramebufferTextureLayer(Context *context, GLenum target, GLenum attachment,
+                                     GLuint texture, GLint level, GLint layer)
+{
+    if (context->getClientVersion() < 3)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    if (layer < 0)
+    {
+        context->recordError(Error(GL_INVALID_VALUE));
+        return false;
+    }
+
+    if (!ValidateFramebufferTextureBase(context, target, attachment, texture, level))
+    {
+        return false;
+    }
+
+    const gl::Caps &caps = context->getCaps();
+    if (texture != 0)
+    {
+        gl::Texture *tex = context->getTexture(texture);
+        ASSERT(tex);
+
+        switch (tex->getTarget())
+        {
+          case GL_TEXTURE_2D_ARRAY:
+            {
+                if (level > gl::log2(caps.max2DTextureSize))
+                {
+                    context->recordError(Error(GL_INVALID_VALUE));
+                    return false;
+                }
+
+                if (static_cast<GLuint>(layer) >= caps.maxArrayTextureLayers)
+                {
+                    context->recordError(Error(GL_INVALID_VALUE));
+                    return false;
+                }
+
+                gl::Texture2DArray *texArray = static_cast<gl::Texture2DArray *>(tex);
+                if (texArray->isCompressed(level))
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+            break;
+
+          case GL_TEXTURE_3D:
+            {
+                if (level > gl::log2(caps.max3DTextureSize))
+                {
+                    context->recordError(Error(GL_INVALID_VALUE));
+                    return false;
+                }
+
+                if (static_cast<GLuint>(layer) >= caps.max3DTextureSize)
+                {
+                    context->recordError(Error(GL_INVALID_VALUE));
+                    return false;
+                }
+
+                gl::Texture3D *tex3d = static_cast<gl::Texture3D *>(tex);
+                if (tex3d->isCompressed(level))
+                {
+                    context->recordError(Error(GL_INVALID_OPERATION));
+                    return false;
+                }
+            }
+            break;
+
+          default:
+            context->recordError(Error(GL_INVALID_OPERATION));
+            return false;
+        }
+    }
+
+    return true;
+}
+
+bool ValidES3ReadFormatType(Context *context, GLenum internalFormat, GLenum format, GLenum type)
+{
+    const gl::InternalFormat &internalFormatInfo = gl::GetInternalFormatInfo(internalFormat);
+
+    switch (format)
+    {
+      case GL_RGBA:
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:
+            break;
+          case GL_UNSIGNED_INT_2_10_10_10_REV:
+            if (internalFormat != GL_RGB10_A2)
+            {
+                return false;
+            }
+            break;
+          case GL_FLOAT:
+            if (internalFormatInfo.componentType != GL_FLOAT)
+            {
+                return false;
+            }
+            break;
+          default:
+            return false;
+        }
+        break;
+      case GL_RGBA_INTEGER:
+        switch (type)
+        {
+          case GL_INT:
+            if (internalFormatInfo.componentType != GL_INT)
+            {
+                return false;
+            }
+            break;
+          case GL_UNSIGNED_INT:
+            if (internalFormatInfo.componentType != GL_UNSIGNED_INT)
+            {
+                return false;
+            }
+            break;
+          default:
+            return false;
+        }
+        break;
+      case GL_BGRA_EXT:
+        switch (type)
+        {
+          case GL_UNSIGNED_BYTE:
+          case GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT:
+          case GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT:
+            break;
+          default:
+            return false;
+        }
+        break;
+      case GL_RG_EXT:
+      case GL_RED_EXT:
+        if (!context->getExtensions().textureRG)
+        {
+            return false;
+        }
+        switch (type)
+        {
+        case GL_UNSIGNED_BYTE:
+            break;
+        default:
+            return false;
+        }
+        break;
+      default:
+        return false;
+    }
+    return true;
+}
+
+bool ValidateInvalidateFramebufferParameters(Context *context, GLenum target, GLsizei numAttachments,
+                                             const GLenum* attachments)
+{
+    bool defaultFramebuffer = false;
+
+    switch (target)
+    {
+      case GL_DRAW_FRAMEBUFFER:
+      case GL_FRAMEBUFFER:
+        defaultFramebuffer = context->getState().getDrawFramebuffer()->id() == 0;
+        break;
+      case GL_READ_FRAMEBUFFER:
+        defaultFramebuffer = context->getState().getReadFramebuffer()->id() == 0;
+        break;
+      default:
+          context->recordError(Error(GL_INVALID_ENUM));
+          return false;
+    }
+
+    for (int i = 0; i < numAttachments; ++i)
+    {
+        if (attachments[i] >= GL_COLOR_ATTACHMENT0 && attachments[i] <= GL_COLOR_ATTACHMENT15)
+        {
+            if (defaultFramebuffer)
+            {
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+
+            if (attachments[i] >= GL_COLOR_ATTACHMENT0 + context->getCaps().maxColorAttachments)
+            {
+                context->recordError(Error(GL_INVALID_OPERATION));
+                return false;
+            }
+        }
+        else
+        {
+            switch (attachments[i])
+            {
+              case GL_DEPTH_ATTACHMENT:
+              case GL_STENCIL_ATTACHMENT:
+              case GL_DEPTH_STENCIL_ATTACHMENT:
+                if (defaultFramebuffer)
+                {
+                    context->recordError(Error(GL_INVALID_ENUM));
+                    return false;
+                }
+                break;
+              case GL_COLOR:
+              case GL_DEPTH:
+              case GL_STENCIL:
+                if (!defaultFramebuffer)
+                {
+                    context->recordError(Error(GL_INVALID_ENUM));
+                    return false;
+                }
+                break;
+              default:
+                context->recordError(Error(GL_INVALID_ENUM));
+                return false;
+            }
+        }
+    }
+
+    return true;
+}
+
+bool ValidateClearBuffer(Context *context)
+{
+    if (context->getClientVersion() < 3)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    const gl::Framebuffer *fbo = context->getState().getDrawFramebuffer();
+    if (!fbo || fbo->completeness() != GL_FRAMEBUFFER_COMPLETE)
+    {
+        context->recordError(Error(GL_INVALID_FRAMEBUFFER_OPERATION));
+        return false;
+    }
+
+    return true;
+}
+
+bool ValidateGetUniformuiv(Context *context, GLuint program, GLint location, GLuint* params)
+{
+    if (context->getClientVersion() < 3)
+    {
+        context->recordError(Error(GL_INVALID_OPERATION));
+        return false;
+    }
+
+    return ValidateGetUniformBase(context, program, location);
+}
+
+}
diff --git a/src/3rdparty/angle/src/libGLESv2/validationES3.h b/src/3rdparty/angle/src/libGLESv2/validationES3.h
new file mode 100644
index 0000000000..cafacca601
--- /dev/null
+++ b/src/3rdparty/angle/src/libGLESv2/validationES3.h
@@ -0,0 +1,44 @@
+//
+// Copyright (c) 2013 The ANGLE Project Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+//
+
+// validationES3.h: Validation functions for OpenGL ES 3.0 entry point parameters
+
+#ifndef LIBGLESV2_VALIDATION_ES3_H
+#define LIBGLESV2_VALIDATION_ES3_H
+
+#include <GLES3/gl3.h>
+
+namespace gl
+{
+
+class Context;
+
+bool ValidateES3TexImageParameters(Context *context, GLenum target, GLint level, GLenum internalformat, bool isCompressed, bool isSubImage,
+                                   GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth,
+                                   GLint border, GLenum format, GLenum type, const GLvoid *pixels);
+
+bool ValidateES3CopyTexImageParameters(Context *context, GLenum target, GLint level, GLenum internalformat,
+                                       bool isSubImage, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y,
+                                       GLsizei width, GLsizei height, GLint border);
+
+bool ValidateES3TexStorageParameters(Context *context, GLenum target, GLsizei levels, GLenum internalformat,
+                                     GLsizei width, GLsizei height, GLsizei depth);
+
+bool ValidateFramebufferTextureLayer(Context *context, GLenum target, GLenum attachment,
+                                     GLuint texture, GLint level, GLint layer);
+
+bool ValidES3ReadFormatType(Context *context, GLenum internalFormat, GLenum format, GLenum type);
+
+bool ValidateInvalidateFramebufferParameters(Context *context, GLenum target, GLsizei numAttachments,
+                                             const GLenum* attachments);
+
+bool ValidateClearBuffer(Context *context);
+
+bool ValidateGetUniformuiv(Context *context, GLuint program, GLint location, GLuint* params);
+
+}
+
+#endif // LIBGLESV2_VALIDATION_ES3_H
diff --git a/src/3rdparty/angle/src/third_party/compiler/ArrayBoundsClamper.h b/src/3rdparty/angle/src/third_party/compiler/ArrayBoundsClamper.h
index f725f55b57..30bb7e3b94 100644
--- a/src/3rdparty/angle/src/third_party/compiler/ArrayBoundsClamper.h
+++ b/src/3rdparty/angle/src/third_party/compiler/ArrayBoundsClamper.h
@@ -26,10 +26,8 @@
 #ifndef THIRD_PARTY_COMPILER_ARRAY_BOUNDS_CLAMPER_H_
 #define THIRD_PARTY_COMPILER_ARRAY_BOUNDS_CLAMPER_H_
 
-#include "GLSLANG/ShaderLang.h"
-
 #include "compiler/translator/InfoSink.h"
-#include "compiler/translator/intermediate.h"
+#include "compiler/translator/IntermNode.h"
 
 class ArrayBoundsClamper {
 public:
diff --git a/src/3rdparty/angle/src/third_party/murmurhash/MurmurHash3.h b/src/3rdparty/angle/src/third_party/murmurhash/MurmurHash3.h
index c08f4f2585..adb52004e2 100644
--- a/src/3rdparty/angle/src/third_party/murmurhash/MurmurHash3.h
+++ b/src/3rdparty/angle/src/third_party/murmurhash/MurmurHash3.h
@@ -8,22 +8,8 @@
 //-----------------------------------------------------------------------------
 // Platform-specific functions and macros
 
-// Microsoft Visual Studio
-
-#if defined(_MSC_VER)
-
-typedef unsigned char uint8_t;
-typedef unsigned long uint32_t;
-typedef unsigned __int64 uint64_t;
-
-// Other compilers
-
-#else	// defined(_MSC_VER)
-
 #include <stdint.h>
 
-#endif // !defined(_MSC_VER)
-
 //-----------------------------------------------------------------------------
 
 void MurmurHash3_x86_32  ( const void * key, int len, uint32_t seed, void * out );
diff --git a/src/3rdparty/angle/src/third_party/systeminfo/SystemInfo.cpp b/src/3rdparty/angle/src/third_party/systeminfo/SystemInfo.cpp
new file mode 100644
index 0000000000..19a9644d70
--- /dev/null
+++ b/src/3rdparty/angle/src/third_party/systeminfo/SystemInfo.cpp
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009 Apple Inc. All Rights Reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL APPLE INC. OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <windows.h>
+
+#if _WIN32_WINNT_WINBLUE
+#include <versionhelpers.h>
+#endif
+
+namespace rx {
+
+#ifndef _WIN32_WINNT_WINBLUE
+static bool IsWindowsVistaOrGreater()
+{
+    OSVERSIONINFOEXW osvi = { };
+    osvi.dwOSVersionInfoSize = sizeof(osvi);
+    osvi.dwMajorVersion = HIBYTE(_WIN32_WINNT_VISTA);
+    osvi.dwMinorVersion = LOBYTE(_WIN32_WINNT_VISTA);
+    DWORDLONG condition = 0;
+    VER_SET_CONDITION(condition, VER_MAJORVERSION, VER_GREATER_EQUAL);
+    VER_SET_CONDITION(condition, VER_MINORVERSION, VER_GREATER_EQUAL);
+    return !!::VerifyVersionInfoW(&osvi, VER_MAJORVERSION | VER_MINORVERSION, condition);
+}
+#endif
+
+bool isWindowsVistaOrGreater()
+{
+    static bool initialized = false;
+    static bool cachedIsWindowsVistaOrGreater;
+
+    if (!initialized) {
+        initialized = true;
+        cachedIsWindowsVistaOrGreater = IsWindowsVistaOrGreater();
+    }
+    return cachedIsWindowsVistaOrGreater;
+}
+
+} // namespace rx
diff --git a/src/3rdparty/angle/src/third_party/systeminfo/SystemInfo.h b/src/3rdparty/angle/src/third_party/systeminfo/SystemInfo.h
new file mode 100644
index 0000000000..65005ee9c6
--- /dev/null
+++ b/src/3rdparty/angle/src/third_party/systeminfo/SystemInfo.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2009 Apple Inc. All Rights Reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL APPLE INC. OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef SystemInfo_h
+#define SystemInfo_h
+
+namespace rx {
+
+bool isWindowsVistaOrGreater();
+
+} // namespace rx
+
+#endif // SystemInfo_h
diff --git a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h b/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
deleted file mode 100644
index 96ac910b08..0000000000
--- a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
+++ /dev/null
@@ -1,828 +0,0 @@
-// Copyright (c) 2013 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-// Trace events are for tracking application performance and resource usage.
-// Macros are provided to track:
-//    Begin and end of function calls
-//    Counters
-//
-// Events are issued against categories. Whereas LOG's
-// categories are statically defined, TRACE categories are created
-// implicitly with a string. For example:
-//   TRACE_EVENT_INSTANT0("MY_SUBSYSTEM", "SomeImportantEvent")
-//
-// Events can be INSTANT, or can be pairs of BEGIN and END in the same scope:
-//   TRACE_EVENT_BEGIN0("MY_SUBSYSTEM", "SomethingCostly")
-//   doSomethingCostly()
-//   TRACE_EVENT_END0("MY_SUBSYSTEM", "SomethingCostly")
-// Note: our tools can't always determine the correct BEGIN/END pairs unless
-// these are used in the same scope. Use ASYNC_BEGIN/ASYNC_END macros if you need them
-// to be in separate scopes.
-//
-// A common use case is to trace entire function scopes. This
-// issues a trace BEGIN and END automatically:
-//   void doSomethingCostly() {
-//     TRACE_EVENT0("MY_SUBSYSTEM", "doSomethingCostly");
-//     ...
-//   }
-//
-// Additional parameters can be associated with an event:
-//   void doSomethingCostly2(int howMuch) {
-//     TRACE_EVENT1("MY_SUBSYSTEM", "doSomethingCostly",
-//         "howMuch", howMuch);
-//     ...
-//   }
-//
-// The trace system will automatically add to this information the
-// current process id, thread id, and a timestamp in microseconds.
-//
-// To trace an asynchronous procedure such as an IPC send/receive, use ASYNC_BEGIN and
-// ASYNC_END:
-//   [single threaded sender code]
-//     static int send_count = 0;
-//     ++send_count;
-//     TRACE_EVENT_ASYNC_BEGIN0("ipc", "message", send_count);
-//     Send(new MyMessage(send_count));
-//   [receive code]
-//     void OnMyMessage(send_count) {
-//       TRACE_EVENT_ASYNC_END0("ipc", "message", send_count);
-//     }
-// The third parameter is a unique ID to match ASYNC_BEGIN/ASYNC_END pairs.
-// ASYNC_BEGIN and ASYNC_END can occur on any thread of any traced process. Pointers can
-// be used for the ID parameter, and they will be mangled internally so that
-// the same pointer on two different processes will not match. For example:
-//   class MyTracedClass {
-//    public:
-//     MyTracedClass() {
-//       TRACE_EVENT_ASYNC_BEGIN0("category", "MyTracedClass", this);
-//     }
-//     ~MyTracedClass() {
-//       TRACE_EVENT_ASYNC_END0("category", "MyTracedClass", this);
-//     }
-//   }
-//
-// Trace event also supports counters, which is a way to track a quantity
-// as it varies over time. Counters are created with the following macro:
-//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter", g_myCounterValue);
-//
-// Counters are process-specific. The macro itself can be issued from any
-// thread, however.
-//
-// Sometimes, you want to track two counters at once. You can do this with two
-// counter macros:
-//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter0", g_myCounterValue[0]);
-//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter1", g_myCounterValue[1]);
-// Or you can do it with a combined macro:
-//   TRACE_COUNTER2("MY_SUBSYSTEM", "myCounter",
-//       "bytesPinned", g_myCounterValue[0],
-//       "bytesAllocated", g_myCounterValue[1]);
-// This indicates to the tracing UI that these counters should be displayed
-// in a single graph, as a summed area chart.
-//
-// Since counters are in a global namespace, you may want to disembiguate with a
-// unique ID, by using the TRACE_COUNTER_ID* variations.
-//
-// By default, trace collection is compiled in, but turned off at runtime.
-// Collecting trace data is the responsibility of the embedding
-// application. In Chrome's case, navigating to about:tracing will turn on
-// tracing and display data collected across all active processes.
-//
-//
-// Memory scoping note:
-// Tracing copies the pointers, not the string content, of the strings passed
-// in for category, name, and arg_names. Thus, the following code will
-// cause problems:
-//     char* str = strdup("impprtantName");
-//     TRACE_EVENT_INSTANT0("SUBSYSTEM", str);  // BAD!
-//     free(str);                   // Trace system now has dangling pointer
-//
-// To avoid this issue with the |name| and |arg_name| parameters, use the
-// TRACE_EVENT_COPY_XXX overloads of the macros at additional runtime overhead.
-// Notes: The category must always be in a long-lived char* (i.e. static const).
-//        The |arg_values|, when used, are always deep copied with the _COPY
-//        macros.
-//
-// When are string argument values copied:
-// const char* arg_values are only referenced by default:
-//     TRACE_EVENT1("category", "name",
-//                  "arg1", "literal string is only referenced");
-// Use TRACE_STR_COPY to force copying of a const char*:
-//     TRACE_EVENT1("category", "name",
-//                  "arg1", TRACE_STR_COPY("string will be copied"));
-// std::string arg_values are always copied:
-//     TRACE_EVENT1("category", "name",
-//                  "arg1", std::string("string will be copied"));
-//
-//
-// Thread Safety:
-// A thread safe singleton and mutex are used for thread safety. Category
-// enabled flags are used to limit the performance impact when the system
-// is not enabled.
-//
-// TRACE_EVENT macros first cache a pointer to a category. The categories are
-// statically allocated and safe at all times, even after exit. Fetching a
-// category is protected by the TraceLog::lock_. Multiple threads initializing
-// the static variable is safe, as they will be serialized by the lock and
-// multiple calls will return the same pointer to the category.
-//
-// Then the category_enabled flag is checked. This is a unsigned char, and
-// not intended to be multithread safe. It optimizes access to addTraceEvent
-// which is threadsafe internally via TraceLog::lock_. The enabled flag may
-// cause some threads to incorrectly call or skip calling addTraceEvent near
-// the time of the system being enabled or disabled. This is acceptable as
-// we tolerate some data loss while the system is being enabled/disabled and
-// because addTraceEvent is threadsafe internally and checks the enabled state
-// again under lock.
-//
-// Without the use of these static category pointers and enabled flags all
-// trace points would carry a significant performance cost of aquiring a lock
-// and resolving the category.
-
-#ifndef COMMON_TRACE_EVENT_H_
-#define COMMON_TRACE_EVENT_H_
-
-#include <string>
-
-#include "common/event_tracer.h"
-
-// By default, const char* argument values are assumed to have long-lived scope
-// and will not be copied. Use this macro to force a const char* to be copied.
-#define TRACE_STR_COPY(str) \
-    WebCore::TraceEvent::TraceStringWithCopy(str)
-
-// Records a pair of begin and end events called "name" for the current
-// scope, with 0, 1 or 2 associated arguments. If the category is not
-// enabled, then this does nothing.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-#define TRACE_EVENT0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name)
-#define TRACE_EVENT1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name, arg1_name, arg1_val)
-#define TRACE_EVENT2(category, name, arg1_name, arg1_val, arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-
-// Records a single event called "name" immediately, with 0, 1 or 2
-// associated arguments. If the category is not enabled, then this
-// does nothing.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-#define TRACE_EVENT_INSTANT0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
-        category, name, TRACE_EVENT_FLAG_NONE)
-#define TRACE_EVENT_INSTANT1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
-#define TRACE_EVENT_INSTANT2(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-#define TRACE_EVENT_COPY_INSTANT0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
-        category, name, TRACE_EVENT_FLAG_COPY)
-#define TRACE_EVENT_COPY_INSTANT1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val)
-#define TRACE_EVENT_COPY_INSTANT2(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-
-// Records a single BEGIN event called "name" immediately, with 0, 1 or 2
-// associated arguments. If the category is not enabled, then this
-// does nothing.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-#define TRACE_EVENT_BEGIN0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
-        category, name, TRACE_EVENT_FLAG_NONE)
-#define TRACE_EVENT_BEGIN1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
-#define TRACE_EVENT_BEGIN2(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-#define TRACE_EVENT_COPY_BEGIN0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
-        category, name, TRACE_EVENT_FLAG_COPY)
-#define TRACE_EVENT_COPY_BEGIN1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val)
-#define TRACE_EVENT_COPY_BEGIN2(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-
-// Records a single END event for "name" immediately. If the category
-// is not enabled, then this does nothing.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-#define TRACE_EVENT_END0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
-        category, name, TRACE_EVENT_FLAG_NONE)
-#define TRACE_EVENT_END1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
-#define TRACE_EVENT_END2(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-#define TRACE_EVENT_COPY_END0(category, name) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
-        category, name, TRACE_EVENT_FLAG_COPY)
-#define TRACE_EVENT_COPY_END1(category, name, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val)
-#define TRACE_EVENT_COPY_END2(category, name, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \
-        arg2_name, arg2_val)
-
-// Records the value of a counter called "name" immediately. Value
-// must be representable as a 32 bit integer.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-#define TRACE_COUNTER1(category, name, value) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, TRACE_EVENT_FLAG_NONE, \
-        "value", static_cast<int>(value))
-#define TRACE_COPY_COUNTER1(category, name, value) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, TRACE_EVENT_FLAG_COPY, \
-        "value", static_cast<int>(value))
-
-// Records the values of a multi-parted counter called "name" immediately.
-// The UI will treat value1 and value2 as parts of a whole, displaying their
-// values as a stacked-bar chart.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-#define TRACE_COUNTER2(category, name, value1_name, value1_val, \
-        value2_name, value2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, TRACE_EVENT_FLAG_NONE, \
-        value1_name, static_cast<int>(value1_val), \
-        value2_name, static_cast<int>(value2_val))
-#define TRACE_COPY_COUNTER2(category, name, value1_name, value1_val, \
-        value2_name, value2_val) \
-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, TRACE_EVENT_FLAG_COPY, \
-        value1_name, static_cast<int>(value1_val), \
-        value2_name, static_cast<int>(value2_val))
-
-// Records the value of a counter called "name" immediately. Value
-// must be representable as a 32 bit integer.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-// - |id| is used to disambiguate counters with the same name. It must either
-//   be a pointer or an integer value up to 64 bits. If it's a pointer, the bits
-//   will be xored with a hash of the process ID so that the same pointer on
-//   two different processes will not collide.
-#define TRACE_COUNTER_ID1(category, name, id, value) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, \
-        "value", static_cast<int>(value))
-#define TRACE_COPY_COUNTER_ID1(category, name, id, value) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, \
-        "value", static_cast<int>(value))
-
-// Records the values of a multi-parted counter called "name" immediately.
-// The UI will treat value1 and value2 as parts of a whole, displaying their
-// values as a stacked-bar chart.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-// - |id| is used to disambiguate counters with the same name. It must either
-//   be a pointer or an integer value up to 64 bits. If it's a pointer, the bits
-//   will be xored with a hash of the process ID so that the same pointer on
-//   two different processes will not collide.
-#define TRACE_COUNTER_ID2(category, name, id, value1_name, value1_val, \
-        value2_name, value2_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, \
-        value1_name, static_cast<int>(value1_val), \
-        value2_name, static_cast<int>(value2_val))
-#define TRACE_COPY_COUNTER_ID2(category, name, id, value1_name, value1_val, \
-        value2_name, value2_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, \
-        value1_name, static_cast<int>(value1_val), \
-        value2_name, static_cast<int>(value2_val))
-
-// Records a single ASYNC_BEGIN event called "name" immediately, with 0, 1 or 2
-// associated arguments. If the category is not enabled, then this
-// does nothing.
-// - category and name strings must have application lifetime (statics or
-//   literals). They may not include " chars.
-// - |id| is used to match the ASYNC_BEGIN event with the ASYNC_END event. ASYNC
-//   events are considered to match if their category, name and id values all
-//   match. |id| must either be a pointer or an integer value up to 64 bits. If
-//   it's a pointer, the bits will be xored with a hash of the process ID so
-//   that the same pointer on two different processes will not collide.
-// An asynchronous operation can consist of multiple phases. The first phase is
-// defined by the ASYNC_BEGIN calls. Additional phases can be defined using the
-// ASYNC_STEP_BEGIN macros. When the operation completes, call ASYNC_END.
-// An async operation can span threads and processes, but all events in that
-// operation must use the same |name| and |id|. Each event can have its own
-// args.
-#define TRACE_EVENT_ASYNC_BEGIN0(category, name, id) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
-        category, name, id, TRACE_EVENT_FLAG_NONE)
-#define TRACE_EVENT_ASYNC_BEGIN1(category, name, id, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
-#define TRACE_EVENT_ASYNC_BEGIN2(category, name, id, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, \
-        arg1_name, arg1_val, arg2_name, arg2_val)
-#define TRACE_EVENT_COPY_ASYNC_BEGIN0(category, name, id) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
-        category, name, id, TRACE_EVENT_FLAG_COPY)
-#define TRACE_EVENT_COPY_ASYNC_BEGIN1(category, name, id, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, \
-        arg1_name, arg1_val)
-#define TRACE_EVENT_COPY_ASYNC_BEGIN2(category, name, id, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, \
-        arg1_name, arg1_val, arg2_name, arg2_val)
-
-// Records a single ASYNC_STEP event for |step| immediately. If the category
-// is not enabled, then this does nothing. The |name| and |id| must match the
-// ASYNC_BEGIN event above. The |step| param identifies this step within the
-// async event. This should be called at the beginning of the next phase of an
-// asynchronous operation.
-#define TRACE_EVENT_ASYNC_STEP0(category, name, id, step) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, "step", step)
-#define TRACE_EVENT_ASYNC_STEP1(category, name, id, step, \
-                                      arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, "step", step, \
-        arg1_name, arg1_val)
-#define TRACE_EVENT_COPY_ASYNC_STEP0(category, name, id, step) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, "step", step)
-#define TRACE_EVENT_COPY_ASYNC_STEP1(category, name, id, step, \
-        arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, "step", step, \
-        arg1_name, arg1_val)
-
-// Records a single ASYNC_END event for "name" immediately. If the category
-// is not enabled, then this does nothing.
-#define TRACE_EVENT_ASYNC_END0(category, name, id) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
-        category, name, id, TRACE_EVENT_FLAG_NONE)
-#define TRACE_EVENT_ASYNC_END1(category, name, id, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
-#define TRACE_EVENT_ASYNC_END2(category, name, id, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
-        category, name, id, TRACE_EVENT_FLAG_NONE, \
-        arg1_name, arg1_val, arg2_name, arg2_val)
-#define TRACE_EVENT_COPY_ASYNC_END0(category, name, id) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
-        category, name, id, TRACE_EVENT_FLAG_COPY)
-#define TRACE_EVENT_COPY_ASYNC_END1(category, name, id, arg1_name, arg1_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, \
-        arg1_name, arg1_val)
-#define TRACE_EVENT_COPY_ASYNC_END2(category, name, id, arg1_name, arg1_val, \
-        arg2_name, arg2_val) \
-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
-        category, name, id, TRACE_EVENT_FLAG_COPY, \
-        arg1_name, arg1_val, arg2_name, arg2_val)
-
-// Creates a scope of a sampling state with the given category and name (both must
-// be constant strings). These states are intended for a sampling profiler.
-// Implementation note: we store category and name together because we don't
-// want the inconsistency/expense of storing two pointers.
-// |thread_bucket| is [0..2] and is used to statically isolate samples in one
-// thread from others.
-//
-// {  // The sampling state is set within this scope.
-//    TRACE_EVENT_SAMPLING_STATE_SCOPE_FOR_BUCKET(0, "category", "name");
-//    ...;
-// }
-#define TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \
-    TraceEvent::SamplingStateScope<bucket_number> traceEventSamplingScope(category "\0" name);
-
-// Returns a current sampling state of the given bucket.
-// The format of the returned string is "category\0name".
-#define TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(bucket_number) \
-    TraceEvent::SamplingStateScope<bucket_number>::current()
-
-// Sets a current sampling state of the given bucket.
-// |category| and |name| have to be constant strings.
-#define TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \
-    TraceEvent::SamplingStateScope<bucket_number>::set(category "\0" name)
-
-// Sets a current sampling state of the given bucket.
-// |categoryAndName| doesn't need to be a constant string.
-// The format of the string is "category\0name".
-#define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(bucket_number, categoryAndName) \
-    TraceEvent::SamplingStateScope<bucket_number>::set(categoryAndName)
-
-// Syntactic sugars for the sampling tracing in the main thread.
-#define TRACE_EVENT_SCOPED_SAMPLING_STATE(category, name) \
-    TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(0, category, name)
-#define TRACE_EVENT_GET_SAMPLING_STATE() \
-    TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(0)
-#define TRACE_EVENT_SET_SAMPLING_STATE(category, name) \
-    TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(0, category, name)
-#define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE(categoryAndName) \
-    TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(0, categoryAndName)
-
-////////////////////////////////////////////////////////////////////////////////
-// Implementation specific tracing API definitions.
-
-// Get a pointer to the enabled state of the given trace category. Only
-// long-lived literal strings should be given as the category name. The returned
-// pointer can be held permanently in a local static for example. If the
-// unsigned char is non-zero, tracing is enabled. If tracing is enabled,
-// TRACE_EVENT_API_ADD_TRACE_EVENT can be called. It's OK if tracing is disabled
-// between the load of the tracing state and the call to
-// TRACE_EVENT_API_ADD_TRACE_EVENT, because this flag only provides an early out
-// for best performance when tracing is disabled.
-// const unsigned char*
-//     TRACE_EVENT_API_GET_CATEGORY_ENABLED(const char* category_name)
-#define TRACE_EVENT_API_GET_CATEGORY_ENABLED \
-    gl::TraceGetTraceCategoryEnabledFlag
-
-// Add a trace event to the platform tracing system.
-// void TRACE_EVENT_API_ADD_TRACE_EVENT(
-//                    char phase,
-//                    const unsigned char* category_enabled,
-//                    const char* name,
-//                    unsigned long long id,
-//                    int num_args,
-//                    const char** arg_names,
-//                    const unsigned char* arg_types,
-//                    const unsigned long long* arg_values,
-//                    unsigned char flags)
-#define TRACE_EVENT_API_ADD_TRACE_EVENT \
-    gl::TraceAddTraceEvent
-
-////////////////////////////////////////////////////////////////////////////////
-
-// Implementation detail: trace event macros create temporary variables
-// to keep instrumentation overhead low. These macros give each temporary
-// variable a unique name based on the line number to prevent name collissions.
-#define INTERNAL_TRACE_EVENT_UID3(a, b) \
-    trace_event_unique_##a##b
-#define INTERNAL_TRACE_EVENT_UID2(a, b) \
-    INTERNAL_TRACE_EVENT_UID3(a, b)
-#define INTERNALTRACEEVENTUID(name_prefix) \
-    INTERNAL_TRACE_EVENT_UID2(name_prefix, __LINE__)
-
-// Implementation detail: internal macro to create static category.
-#define INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category) \
-    static const unsigned char* INTERNALTRACEEVENTUID(catstatic) = 0; \
-    if (!INTERNALTRACEEVENTUID(catstatic)) \
-      INTERNALTRACEEVENTUID(catstatic) = \
-          TRACE_EVENT_API_GET_CATEGORY_ENABLED(category);
-
-// Implementation detail: internal macro to create static category and add
-// event if the category is enabled.
-#define INTERNAL_TRACE_EVENT_ADD(phase, category, name, flags, ...) \
-    do { \
-        INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category); \
-        if (*INTERNALTRACEEVENTUID(catstatic)) { \
-            gl::TraceEvent::addTraceEvent( \
-                phase, INTERNALTRACEEVENTUID(catstatic), name, \
-                gl::TraceEvent::noEventId, flags, ##__VA_ARGS__); \
-        } \
-    } while (0)
-
-// Implementation detail: internal macro to create static category and add begin
-// event if the category is enabled. Also adds the end event when the scope
-// ends.
-#define INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name, ...) \
-    INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category); \
-    gl::TraceEvent::TraceEndOnScopeClose \
-        INTERNALTRACEEVENTUID(profileScope); \
-    if (*INTERNALTRACEEVENTUID(catstatic)) { \
-      gl::TraceEvent::addTraceEvent( \
-          TRACE_EVENT_PHASE_BEGIN, \
-          INTERNALTRACEEVENTUID(catstatic), \
-          name, gl::TraceEvent::noEventId, \
-          TRACE_EVENT_FLAG_NONE, ##__VA_ARGS__); \
-      INTERNALTRACEEVENTUID(profileScope).initialize( \
-          INTERNALTRACEEVENTUID(catstatic), name); \
-    }
-
-// Implementation detail: internal macro to create static category and add
-// event if the category is enabled.
-#define INTERNAL_TRACE_EVENT_ADD_WITH_ID(phase, category, name, id, flags, \
-                                         ...) \
-    do { \
-        INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category); \
-        if (*INTERNALTRACEEVENTUID(catstatic)) { \
-            unsigned char traceEventFlags = flags | TRACE_EVENT_FLAG_HAS_ID; \
-            gl::TraceEvent::TraceID traceEventTraceID( \
-                id, &traceEventFlags); \
-            gl::TraceEvent::addTraceEvent( \
-                phase, INTERNALTRACEEVENTUID(catstatic), \
-                name, traceEventTraceID.data(), traceEventFlags, \
-                ##__VA_ARGS__); \
-        } \
-    } while (0)
-
-// Notes regarding the following definitions:
-// New values can be added and propagated to third party libraries, but existing
-// definitions must never be changed, because third party libraries may use old
-// definitions.
-
-// Phase indicates the nature of an event entry. E.g. part of a begin/end pair.
-#define TRACE_EVENT_PHASE_BEGIN    ('B')
-#define TRACE_EVENT_PHASE_END      ('E')
-#define TRACE_EVENT_PHASE_INSTANT  ('I')
-#define TRACE_EVENT_PHASE_ASYNC_BEGIN ('S')
-#define TRACE_EVENT_PHASE_ASYNC_STEP  ('T')
-#define TRACE_EVENT_PHASE_ASYNC_END   ('F')
-#define TRACE_EVENT_PHASE_METADATA ('M')
-#define TRACE_EVENT_PHASE_COUNTER  ('C')
-#define TRACE_EVENT_PHASE_SAMPLE  ('P')
-
-// Flags for changing the behavior of TRACE_EVENT_API_ADD_TRACE_EVENT.
-#define TRACE_EVENT_FLAG_NONE        (static_cast<unsigned char>(0))
-#define TRACE_EVENT_FLAG_COPY        (static_cast<unsigned char>(1 << 0))
-#define TRACE_EVENT_FLAG_HAS_ID      (static_cast<unsigned char>(1 << 1))
-#define TRACE_EVENT_FLAG_MANGLE_ID   (static_cast<unsigned char>(1 << 2))
-
-// Type values for identifying types in the TraceValue union.
-#define TRACE_VALUE_TYPE_BOOL         (static_cast<unsigned char>(1))
-#define TRACE_VALUE_TYPE_UINT         (static_cast<unsigned char>(2))
-#define TRACE_VALUE_TYPE_INT          (static_cast<unsigned char>(3))
-#define TRACE_VALUE_TYPE_DOUBLE       (static_cast<unsigned char>(4))
-#define TRACE_VALUE_TYPE_POINTER      (static_cast<unsigned char>(5))
-#define TRACE_VALUE_TYPE_STRING       (static_cast<unsigned char>(6))
-#define TRACE_VALUE_TYPE_COPY_STRING  (static_cast<unsigned char>(7))
-
-
-namespace gl {
-
-namespace TraceEvent {
-
-// Specify these values when the corresponding argument of addTraceEvent is not
-// used.
-const int zeroNumArgs = 0;
-const unsigned long long noEventId = 0;
-
-// TraceID encapsulates an ID that can either be an integer or pointer. Pointers
-// are mangled with the Process ID so that they are unlikely to collide when the
-// same pointer is used on different processes.
-class TraceID {
-public:
-    explicit TraceID(const void* id, unsigned char* flags) :
-        m_data(reinterpret_cast<unsigned long long>(id))
-    {
-        *flags |= TRACE_EVENT_FLAG_MANGLE_ID;
-    }
-    explicit TraceID(unsigned long long id, unsigned char* flags) : m_data(id) { (void)flags; }
-    explicit TraceID(unsigned long id, unsigned char* flags) : m_data(id) { (void)flags; }
-    explicit TraceID(unsigned int id, unsigned char* flags) : m_data(id) { (void)flags; }
-    explicit TraceID(unsigned short id, unsigned char* flags) : m_data(id) { (void)flags; }
-    explicit TraceID(unsigned char id, unsigned char* flags) : m_data(id) { (void)flags; }
-    explicit TraceID(long long id, unsigned char* flags) :
-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
-    explicit TraceID(long id, unsigned char* flags) :
-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
-    explicit TraceID(int id, unsigned char* flags) :
-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
-    explicit TraceID(short id, unsigned char* flags) :
-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
-    explicit TraceID(signed char id, unsigned char* flags) :
-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
-
-    unsigned long long data() const { return m_data; }
-
-private:
-    unsigned long long m_data;
-};
-
-// Simple union to store various types as unsigned long long.
-union TraceValueUnion {
-    bool m_bool;
-    unsigned long long m_uint;
-    long long m_int;
-    double m_double;
-    const void* m_pointer;
-    const char* m_string;
-};
-
-// Simple container for const char* that should be copied instead of retained.
-class TraceStringWithCopy {
-public:
-    explicit TraceStringWithCopy(const char* str) : m_str(str) { }
-    operator const char* () const { return m_str; }
-private:
-    const char* m_str;
-};
-
-// Define setTraceValue for each allowed type. It stores the type and
-// value in the return arguments. This allows this API to avoid declaring any
-// structures so that it is portable to third_party libraries.
-#define INTERNAL_DECLARE_SET_TRACE_VALUE(actual_type, \
-                                         union_member, \
-                                         value_type_id) \
-    static inline void setTraceValue(actual_type arg, \
-                                     unsigned char* type, \
-                                     unsigned long long* value) { \
-        TraceValueUnion typeValue; \
-        typeValue.union_member = arg; \
-        *type = value_type_id; \
-        *value = typeValue.m_uint; \
-    }
-// Simpler form for int types that can be safely casted.
-#define INTERNAL_DECLARE_SET_TRACE_VALUE_INT(actual_type, \
-                                             value_type_id) \
-    static inline void setTraceValue(actual_type arg, \
-                                     unsigned char* type, \
-                                     unsigned long long* value) { \
-        *type = value_type_id; \
-        *value = static_cast<unsigned long long>(arg); \
-    }
-
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned long long, TRACE_VALUE_TYPE_UINT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned int, TRACE_VALUE_TYPE_UINT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned short, TRACE_VALUE_TYPE_UINT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned char, TRACE_VALUE_TYPE_UINT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(long long, TRACE_VALUE_TYPE_INT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(int, TRACE_VALUE_TYPE_INT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(short, TRACE_VALUE_TYPE_INT)
-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(signed char, TRACE_VALUE_TYPE_INT)
-INTERNAL_DECLARE_SET_TRACE_VALUE(bool, m_bool, TRACE_VALUE_TYPE_BOOL)
-INTERNAL_DECLARE_SET_TRACE_VALUE(double, m_double, TRACE_VALUE_TYPE_DOUBLE)
-INTERNAL_DECLARE_SET_TRACE_VALUE(const void*, m_pointer,
-                                 TRACE_VALUE_TYPE_POINTER)
-INTERNAL_DECLARE_SET_TRACE_VALUE(const char*, m_string,
-                                 TRACE_VALUE_TYPE_STRING)
-INTERNAL_DECLARE_SET_TRACE_VALUE(const TraceStringWithCopy&, m_string,
-                                 TRACE_VALUE_TYPE_COPY_STRING)
-
-#undef INTERNAL_DECLARE_SET_TRACE_VALUE
-#undef INTERNAL_DECLARE_SET_TRACE_VALUE_INT
-
-static inline void setTraceValue(const std::string& arg,
-                                 unsigned char* type,
-                                 unsigned long long* value) {
-    TraceValueUnion typeValue;
-    typeValue.m_string = arg.data();
-    *type = TRACE_VALUE_TYPE_COPY_STRING;
-    *value = typeValue.m_uint;
-}
-
-// These addTraceEvent template functions are defined here instead of in the
-// macro, because the arg values could be temporary string objects. In order to
-// store pointers to the internal c_str and pass through to the tracing API, the
-// arg values must live throughout these procedures.
-
-static inline void addTraceEvent(char phase,
-                                const unsigned char* categoryEnabled,
-                                const char* name,
-                                unsigned long long id,
-                                unsigned char flags) {
-    TRACE_EVENT_API_ADD_TRACE_EVENT(
-        phase, categoryEnabled, name, id,
-        zeroNumArgs, 0, 0, 0,
-        flags);
-}
-
-template<class ARG1_TYPE>
-static inline void addTraceEvent(char phase,
-                                const unsigned char* categoryEnabled,
-                                const char* name,
-                                unsigned long long id,
-                                unsigned char flags,
-                                const char* arg1Name,
-                                const ARG1_TYPE& arg1Val) {
-    const int numArgs = 1;
-    unsigned char argTypes[1];
-    unsigned long long argValues[1];
-    setTraceValue(arg1Val, &argTypes[0], &argValues[0]);
-    TRACE_EVENT_API_ADD_TRACE_EVENT(
-        phase, categoryEnabled, name, id,
-        numArgs, &arg1Name, argTypes, argValues,
-        flags);
-}
-
-template<class ARG1_TYPE, class ARG2_TYPE>
-static inline void addTraceEvent(char phase,
-                                const unsigned char* categoryEnabled,
-                                const char* name,
-                                unsigned long long id,
-                                unsigned char flags,
-                                const char* arg1Name,
-                                const ARG1_TYPE& arg1Val,
-                                const char* arg2Name,
-                                const ARG2_TYPE& arg2Val) {
-    const int numArgs = 2;
-    const char* argNames[2] = { arg1Name, arg2Name };
-    unsigned char argTypes[2];
-    unsigned long long argValues[2];
-    setTraceValue(arg1Val, &argTypes[0], &argValues[0]);
-    setTraceValue(arg2Val, &argTypes[1], &argValues[1]);
-    return TRACE_EVENT_API_ADD_TRACE_EVENT(
-        phase, categoryEnabled, name, id,
-        numArgs, argNames, argTypes, argValues,
-        flags);
-}
-
-// Used by TRACE_EVENTx macro. Do not use directly.
-class TraceEndOnScopeClose {
-public:
-    // Note: members of m_data intentionally left uninitialized. See initialize.
-    TraceEndOnScopeClose() : m_pdata(0) { }
-    ~TraceEndOnScopeClose()
-    {
-        if (m_pdata)
-            addEventIfEnabled();
-    }
-
-    void initialize(const unsigned char* categoryEnabled,
-                    const char* name)
-    {
-        m_data.categoryEnabled = categoryEnabled;
-        m_data.name = name;
-        m_pdata = &m_data;
-    }
-
-private:
-    // Add the end event if the category is still enabled.
-    void addEventIfEnabled()
-    {
-        // Only called when m_pdata is non-null.
-        if (*m_pdata->categoryEnabled) {
-            TRACE_EVENT_API_ADD_TRACE_EVENT(
-                TRACE_EVENT_PHASE_END,
-                m_pdata->categoryEnabled,
-                m_pdata->name, noEventId,
-                zeroNumArgs, 0, 0, 0,
-                TRACE_EVENT_FLAG_NONE);
-        }
-    }
-
-    // This Data struct workaround is to avoid initializing all the members
-    // in Data during construction of this object, since this object is always
-    // constructed, even when tracing is disabled. If the members of Data were
-    // members of this class instead, compiler warnings occur about potential
-    // uninitialized accesses.
-    struct Data {
-        const unsigned char* categoryEnabled;
-        const char* name;
-    };
-    Data* m_pdata;
-    Data m_data;
-};
-
-// TraceEventSamplingStateScope records the current sampling state
-// and sets a new sampling state. When the scope exists, it restores
-// the sampling state having recorded.
-#if 0 // This is not used by ANGLE and causes a compilation error on MinGW
-template<size_t BucketNumber>
-class SamplingStateScope {
-public:
-    SamplingStateScope(const char* categoryAndName)
-    {
-        m_previousState = SamplingStateScope<BucketNumber>::current();
-        SamplingStateScope<BucketNumber>::set(categoryAndName);
-    }
-
-    ~SamplingStateScope()
-    {
-        SamplingStateScope<BucketNumber>::set(m_previousState);
-    }
-
-    // FIXME: Make load/store to traceSamplingState[] thread-safe and atomic.
-    static inline const char* current()
-    {
-        return reinterpret_cast<const char*>(*gl::traceSamplingState[BucketNumber]);
-    }
-    static inline void set(const char* categoryAndName)
-    {
-        *gl::traceSamplingState[BucketNumber] = reinterpret_cast<long>(const_cast<char*>(categoryAndName));
-    }
-
-private:
-    const char* m_previousState;
-};
-#endif
-
-} // namespace TraceEvent
-
-} // namespace gl
-
-#endif
diff --git a/src/3rdparty/harfbuzz-ng/AUTHORS b/src/3rdparty/harfbuzz-ng/AUTHORS
index c611d7d476..81cdc4cf37 100644
--- a/src/3rdparty/harfbuzz-ng/AUTHORS
+++ b/src/3rdparty/harfbuzz-ng/AUTHORS
@@ -4,5 +4,6 @@ Martin Hosken
 Jonathan Kew
 Lars Knoll
 Werner Lemberg
+Roozbeh Pournader
 Owen Taylor
 David Turner
diff --git a/src/3rdparty/harfbuzz-ng/NEWS b/src/3rdparty/harfbuzz-ng/NEWS
index 0a2477268a..f4fabc7cd9 100644
--- a/src/3rdparty/harfbuzz-ng/NEWS
+++ b/src/3rdparty/harfbuzz-ng/NEWS
@@ -1,3 +1,122 @@
+Overview of changes leading to 0.9.32
+Thursday, July 17, 2014
+=====================================
+
+- Apply Arabic shaping features in spec order exactly.
+- Another fix for Mongolian free variation selectors.
+- For non-Arabic scripts in Arabic shaper apply 'rlig' and 'calt'
+  together.
+- Minor adjustment to U+FFFD logic.
+- Fix hb-coretext build.
+
+
+Overview of changes leading to 0.9.31
+Wednesday, July 16, 2014
+=====================================
+
+- Only accept valid UTF-8/16/32; we missed many cases before.
+- Better shaping of invalid UTF-8/16/32.  Falls back to
+  U+FFFD REPLACEMENT CHARACTER now.
+- With all changes in this release, the buffer will contain fully
+  valid Unicode after hb_buffer_add_utf8/16/32 no matter how
+  broken the input is.  This can be overriden though.  See below.
+- Fix Mongolian Variation Selectors for fonts without GDEF.
+- Fix minor invalid buffer access.
+- Accept zh-Hant and zh-Hans language tags.  hb_ot_tag_to_language()
+  now uses these instead of private tags.
+- Build fixes.
+- New API:
+  * hb_buffer_add_codepoints().  This does what hb_buffer_add_utf32()
+    used to do, ie. no validity check on the input at all.  add_utf32
+    now replaces invalid Unicode codepoints with the replacement
+    character (see below).
+  * hb_buffer_set_replacement_codepoint()
+  * hb_buffer_get_replacement_codepoint()
+    Previously, in hb_buffer_add_utf8 and hb_buffer_add_utf16, when
+    we detected broken input, we replaced that with (hb_codepoint_t)-1.
+    This has changed to use U+FFFD now, but can be changed using these
+    new API.
+
+
+Overview of changes leading to 0.9.30
+Wednesday, July 9, 2014
+=====================================
+
+- Update to Unicode 7.0.0:
+  * New scripts Manichaean and Psalter Pahlavi are shaped using
+    Arabic shaper.
+  * All the other new scripts to through the generic shaper for
+    now.
+- Minor Indic improvements.
+- Fix graphite2 backend cluster mapping [crasher!]
+- API changes:
+  * New HB_SCRIPT_* values for Unicode 7.0 scripts.
+  * New function hb_ot_layout_language_get_required_feature().
+- Build fixes.
+
+
+Overview of changes leading to 0.9.29
+Thursday, May 29, 2014
+=====================================
+
+- Implement cmap in hb-ot-font.h.  No variation-selectors yet.
+- Myanmar: Allow MedialYa+Asat.
+- Various Indic fixes:
+  * Support most characters in Extended Devanagary and Vedic
+    Unicode blocks.
+  * Allow digits and a some punctuation as consonant placeholders.
+- Build fixes.
+
+
+Overview of changes leading to 0.9.28
+Monday, April 28, 2014
+=====================================
+
+- Unbreak old-spec Indic shaping. (bug 76705)
+- Fix shaping of U+17DD and U+0FC6.
+- Add HB_NO_MERGE_CLUSTERS build option.  NOT to be enabled by default
+  for shipping libraries.  It's an option for further experimentation
+  right now.  When we are sure how to do it properly, we will add
+  public run-time API for the functionality.
+- Build fixes.
+
+
+Overview of changes leading to 0.9.27
+Tuesday, March 18, 2014
+=====================================
+
+- Don't use "register" storage class specifier
+- Wrap definition of free_langs() with HAVE_ATEXIT
+- Add coretext_aat shaper and hb_coretext_face_create() constructor
+- If HAVE_ICU_BUILTIN is defined, use hb-icu Unicode callbacks
+- Add Myanmar test case from OpenType Myanmar spec
+- Only do fallback Hebrew composition if no GPOS 'mark' available
+- Allow bootstrapping without gtk-doc
+- Use AM_MISSING_PROG for ragel and git
+- Typo in ucdn's Makefile.am
+- Improve MemoryBarrier() implementation
+
+
+Overview of changes leading to 0.9.26
+Thursday, January 30, 2014
+=====================================
+
+- Misc fixes.
+- Fix application of 'rtlm' feature.
+- Automatically apply frac/numr/dnom around U+2044 FRACTION SLASH.
+- New header: hb-ot-shape.h
+- Uniscribe: fix scratch-buffer accounting.
+- Reorder Tai Tham SAKOT to after tone-marks.
+- Add Hangul shaper.
+- New files:
+  hb-ot-shape-complex-hangul.cc
+  hb-ot-shape-complex-hebrew.cc
+  hb-ot-shape-complex-tibetan.cc
+- Disable 'cswh' feature in Arabic shaper.
+- Coretext: better handle surrogate pairs.
+- Add HB_TAG_MAX and _HB_SCRIPT_MAX_VALUE.
+
+
 Overview of changes leading to 0.9.25
 Wednesday, December 4, 2013
 =====================================
diff --git a/src/3rdparty/harfbuzz-ng/harfbuzz-ng.pro b/src/3rdparty/harfbuzz-ng/harfbuzz-ng.pro
index 246c763fd6..79c2a3e2d6 100644
--- a/src/3rdparty/harfbuzz-ng/harfbuzz-ng.pro
+++ b/src/3rdparty/harfbuzz-ng/harfbuzz-ng.pro
@@ -7,8 +7,7 @@ CONFIG += \
 
 load(qt_helper_lib)
 
-DEFINES += HAVE_CONFIG_H
-HEADERS += $$PWD/src/config.h
+DEFINES += HAVE_OT HAVE_ATEXIT HB_NO_UNICODE_FUNCS HB_DISABLE_DEPRECATED
 
 INCLUDEPATH += $$PWD/include
 
@@ -39,6 +38,7 @@ HEADERS += \
     $$PWD/src/hb-object-private.hh \
     $$PWD/src/hb-open-file-private.hh \
     $$PWD/src/hb-open-type-private.hh \
+    $$PWD/src/hb-ot-cmap-table.hh \
     $$PWD/src/hb-ot-head-table.hh \
     $$PWD/src/hb-ot-hhea-table.hh \
     $$PWD/src/hb-ot-hmtx-table.hh \
@@ -58,6 +58,7 @@ HEADERS += \
     $$PWD/src/hb-blob.h \
     $$PWD/src/hb-buffer.h \
     $$PWD/src/hb-common.h \
+    $$PWD/src/hb-deprecated.h \
     $$PWD/src/hb-face.h \
     $$PWD/src/hb-font.h \
     $$PWD/src/hb-set.h \
@@ -68,6 +69,7 @@ HEADERS += \
 
 # Open Type
 SOURCES += \
+    $$PWD/src/hb-ot-font.cc \
     $$PWD/src/hb-ot-layout.cc \
     $$PWD/src/hb-ot-map.cc \
     $$PWD/src/hb-ot-shape.cc \
@@ -106,6 +108,7 @@ HEADERS += \
 
 HEADERS += \
     $$PWD/src/hb-ot.h \
+    $$PWD/src/hb-ot-font.h \
     $$PWD/src/hb-ot-layout.h \
     $$PWD/src/hb-ot-shape.h \
     $$PWD/src/hb-ot-tag.h
diff --git a/src/3rdparty/harfbuzz-ng/include/harfbuzz/hb-ot-font.h b/src/3rdparty/harfbuzz-ng/include/harfbuzz/hb-ot-font.h
new file mode 100644
index 0000000000..146441b33b
--- /dev/null
+++ b/src/3rdparty/harfbuzz-ng/include/harfbuzz/hb-ot-font.h
@@ -0,0 +1 @@
+#include "../../src/hb-ot-font.h"
diff --git a/src/3rdparty/harfbuzz-ng/src/config.h b/src/3rdparty/harfbuzz-ng/src/config.h
deleted file mode 100644
index 9abb5df7f1..0000000000
--- a/src/3rdparty/harfbuzz-ng/src/config.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef HB_CONFIG_H
-#define HB_CONFIG_H
-
-#define HAVE_OT
-#define HAVE_ATEXIT
-
-#define HB_NO_UNICODE_FUNCS
-
-#define HB_DISABLE_DEPRECATED
-
-// because strdup() is not part of strict Posix, declare it here
-extern "C" char *strdup(const char *src);
-
-#endif /* HB_CONFIG_H */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-atomic-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-atomic-private.hh
index b5d64853ea..60cbcf91be 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-atomic-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-atomic-private.hh
@@ -47,18 +47,22 @@
 #define WIN32_LEAN_AND_MEAN
 #include <windows.h>
 
-#if defined(__MINGW32__) && !defined(MemoryBarrier)
+/* MinGW has a convoluted history of supporting MemoryBarrier
+ * properly.  As such, define a function to wrap the whole
+ * thing. */
 static inline void _HBMemoryBarrier (void) {
+#if !defined(MemoryBarrier)
   long dummy = 0;
   InterlockedExchange (&dummy, 1);
-}
-# define MemoryBarrier _HBMemoryBarrier
+#else
+  MemoryBarrier ();
 #endif
+}
 
 typedef LONG hb_atomic_int_t;
 #define hb_atomic_int_add(AI, V)	InterlockedExchangeAdd (&(AI), (V))
 
-#define hb_atomic_ptr_get(P)		(MemoryBarrier (), (void *) *(P))
+#define hb_atomic_ptr_get(P)		(_HBMemoryBarrier (), (void *) *(P))
 #define hb_atomic_ptr_cmpexch(P,O,N)	(InterlockedCompareExchangePointer ((void **) (P), (void *) (N), (void *) (O)) == (void *) (O))
 
 
@@ -78,7 +82,7 @@ typedef int32_t hb_atomic_int_t;
 #if (MAC_OS_X_VERSION_MIN_REQUIRED > MAC_OS_X_VERSION_10_4 || __IPHONE_VERSION_MIN_REQUIRED >= 20100)
 #define hb_atomic_ptr_cmpexch(P,O,N)	OSAtomicCompareAndSwapPtrBarrier ((void *) (O), (void *) (N), (void **) (P))
 #else
-#if __ppc64__ || __x86_64__ || __arm64__
+#if __ppc64__ || __x86_64__ || __aarch64__
 #define hb_atomic_ptr_cmpexch(P,O,N)    OSAtomicCompareAndSwap64Barrier ((int64_t) (O), (int64_t) (N), (int64_t*) (P))
 #else
 #define hb_atomic_ptr_cmpexch(P,O,N)    OSAtomicCompareAndSwap32Barrier ((int32_t) (O), (int32_t) (N), (int32_t*) (P))
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-blob.cc b/src/3rdparty/harfbuzz-ng/src/hb-blob.cc
index d6acca0fca..b82b4b2a3a 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-blob.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-blob.cc
@@ -25,7 +25,9 @@
  */
 
 /* http://www.oracle.com/technetwork/articles/servers-storage-dev/standardheaderfiles-453865.html */
+#ifndef _POSIX_C_SOURCE
 #define _POSIX_C_SOURCE 199309L
+#endif
 
 #include "hb-private.hh"
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-blob.h b/src/3rdparty/harfbuzz-ng/src/hb-blob.h
index d3d0f41b11..b2419abfd2 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-blob.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-blob.h
@@ -47,14 +47,13 @@ HB_BEGIN_DECLS
  * - Use MODE_READONLY otherse, unless you really really
  *   really know what you are doing,
  *
- * - MODE_WRITABLE is appropriate if you relaly made a
+ * - MODE_WRITABLE is appropriate if you really made a
  *   copy of data solely for the purpose of passing to
  *   HarfBuzz and doing that just once (no reuse!),
  *
  * - If the font is mmap()ed, it's ok to use
- *   READONLY_MAY_MAKE_WRITABLE, however, there were
- *   design problems with that mode, so HarfBuzz do not
- *   really use it anymore.  If not sure, use MODE_READONLY.
+ *   READONLY_MAY_MAKE_WRITABLE, however, using that mode
+ *   correctly is very tricky.  Use MODE_READONLY instead.
  */
 typedef enum {
   HB_MEMORY_MODE_DUPLICATE,
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-buffer-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-buffer-private.hh
index 3a2b9ab481..5eccd3c31f 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-buffer-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-buffer-private.hh
@@ -52,6 +52,7 @@ struct hb_buffer_t {
   hb_unicode_funcs_t *unicode; /* Unicode functions */
   hb_segment_properties_t props; /* Script, language, direction */
   hb_buffer_flags_t flags; /* BOT / EOT / etc. */
+  hb_codepoint_t replacement; /* U+FFFD or something else. */
 
   /* Buffer contents */
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-buffer-serialize.cc b/src/3rdparty/harfbuzz-ng/src/hb-buffer-serialize.cc
index 263bc81dc4..406d69db75 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-buffer-serialize.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-buffer-serialize.cc
@@ -63,7 +63,7 @@ hb_buffer_serialize_format_t
 hb_buffer_serialize_format_from_string (const char *str, int len)
 {
   /* Upper-case it. */
-  return (hb_buffer_serialize_format_t) (hb_tag_from_string (str, len) & ~0x20202020);
+  return (hb_buffer_serialize_format_t) (hb_tag_from_string (str, len) & ~0x20202020u);
 }
 
 /**
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-buffer.cc b/src/3rdparty/harfbuzz-ng/src/hb-buffer.cc
index d6c6fcb8e6..2377ba40da 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-buffer.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-buffer.cc
@@ -178,6 +178,7 @@ hb_buffer_t::reset (void)
 
   hb_unicode_funcs_destroy (unicode);
   unicode = hb_unicode_funcs_get_default ();
+  replacement = HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT;
 
   clear ();
 }
@@ -500,6 +501,10 @@ void
 hb_buffer_t::merge_clusters (unsigned int start,
 			     unsigned int end)
 {
+#ifdef HB_NO_MERGE_CLUSTERS
+  return;
+#endif
+
   if (unlikely (end - start < 2))
     return;
 
@@ -528,6 +533,10 @@ void
 hb_buffer_t::merge_out_clusters (unsigned int start,
 				 unsigned int end)
 {
+#ifdef HB_NO_MERGE_CLUSTERS
+  return;
+#endif
+
   if (unlikely (end - start < 2))
     return;
 
@@ -695,6 +704,7 @@ hb_buffer_get_empty (void)
     const_cast<hb_unicode_funcs_t *> (&_hb_unicode_funcs_nil),
     HB_SEGMENT_PROPERTIES_DEFAULT,
     HB_BUFFER_FLAG_DEFAULT,
+    HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT,
 
     HB_BUFFER_CONTENT_TYPE_INVALID,
     true, /* in_error */
@@ -1040,6 +1050,42 @@ hb_buffer_get_flags (hb_buffer_t *buffer)
 
 
 /**
+ * hb_buffer_set_replacement_codepoint:
+ * @buffer: a buffer.
+ * @replacement: 
+ *
+ * 
+ *
+ * Since: 1.0
+ **/
+void
+hb_buffer_set_replacement_codepoint (hb_buffer_t    *buffer,
+				     hb_codepoint_t  replacement)
+{
+  if (unlikely (hb_object_is_inert (buffer)))
+    return;
+
+  buffer->replacement = replacement;
+}
+
+/**
+ * hb_buffer_get_replacement_codepoint:
+ * @buffer: a buffer.
+ *
+ * 
+ *
+ * Return value: 
+ *
+ * Since: 1.0
+ **/
+hb_codepoint_t
+hb_buffer_get_replacement_codepoint (hb_buffer_t    *buffer)
+{
+  return buffer->replacement;
+}
+
+
+/**
  * hb_buffer_reset:
  * @buffer: a buffer.
  *
@@ -1282,7 +1328,7 @@ hb_buffer_guess_segment_properties (hb_buffer_t *buffer)
   buffer->guess_segment_properties ();
 }
 
-template <typename T>
+template <bool validate, typename T>
 static inline void
 hb_buffer_add_utf (hb_buffer_t  *buffer,
 		   const T      *text,
@@ -1290,6 +1336,9 @@ hb_buffer_add_utf (hb_buffer_t  *buffer,
 		   unsigned int  item_offset,
 		   int           item_length)
 {
+  typedef hb_utf_t<T, true> utf_t;
+  const hb_codepoint_t replacement = buffer->replacement;
+
   assert (buffer->content_type == HB_BUFFER_CONTENT_TYPE_UNICODE ||
 	  (!buffer->len && buffer->content_type == HB_BUFFER_CONTENT_TYPE_INVALID));
 
@@ -1297,7 +1346,7 @@ hb_buffer_add_utf (hb_buffer_t  *buffer,
     return;
 
   if (text_length == -1)
-    text_length = hb_utf_strlen (text);
+    text_length = utf_t::strlen (text);
 
   if (item_length == -1)
     item_length = text_length - item_offset;
@@ -1320,7 +1369,7 @@ hb_buffer_add_utf (hb_buffer_t  *buffer,
     while (start < prev && buffer->context_len[0] < buffer->CONTEXT_LENGTH)
     {
       hb_codepoint_t u;
-      prev = hb_utf_prev (prev, start, &u);
+      prev = utf_t::prev (prev, start, &u, replacement);
       buffer->context[0][buffer->context_len[0]++] = u;
     }
   }
@@ -1331,7 +1380,7 @@ hb_buffer_add_utf (hb_buffer_t  *buffer,
   {
     hb_codepoint_t u;
     const T *old_next = next;
-    next = hb_utf_next (next, end, &u);
+    next = utf_t::next (next, end, &u, replacement);
     buffer->add (u, old_next - (const T *) text);
   }
 
@@ -1341,7 +1390,7 @@ hb_buffer_add_utf (hb_buffer_t  *buffer,
   while (next < end && buffer->context_len[1] < buffer->CONTEXT_LENGTH)
   {
     hb_codepoint_t u;
-    next = hb_utf_next (next, end, &u);
+    next = utf_t::next (next, end, &u, replacement);
     buffer->context[1][buffer->context_len[1]++] = u;
   }
 
@@ -1367,7 +1416,7 @@ hb_buffer_add_utf8 (hb_buffer_t  *buffer,
 		    unsigned int  item_offset,
 		    int           item_length)
 {
-  hb_buffer_add_utf (buffer, (const uint8_t *) text, text_length, item_offset, item_length);
+  hb_buffer_add_utf<true> (buffer, (const uint8_t *) text, text_length, item_offset, item_length);
 }
 
 /**
@@ -1389,7 +1438,7 @@ hb_buffer_add_utf16 (hb_buffer_t    *buffer,
 		     unsigned int    item_offset,
 		     int             item_length)
 {
-  hb_buffer_add_utf (buffer, text, text_length, item_offset, item_length);
+  hb_buffer_add_utf<true> (buffer, text, text_length, item_offset, item_length);
 }
 
 /**
@@ -1411,7 +1460,29 @@ hb_buffer_add_utf32 (hb_buffer_t    *buffer,
 		     unsigned int    item_offset,
 		     int             item_length)
 {
-  hb_buffer_add_utf (buffer, text, text_length, item_offset, item_length);
+  hb_buffer_add_utf<true> (buffer, text, text_length, item_offset, item_length);
+}
+
+/**
+ * hb_buffer_add_codepoints:
+ * @buffer: a buffer.
+ * @text: (array length=text_length):
+ * @text_length: 
+ * @item_offset: 
+ * @item_length: 
+ *
+ * 
+ *
+ * Since: 1.0
+ **/
+void
+hb_buffer_add_codepoints (hb_buffer_t          *buffer,
+			  const hb_codepoint_t *text,
+			  int                   text_length,
+			  unsigned int          item_offset,
+			  int                   item_length)
+{
+  hb_buffer_add_utf<false> (buffer, text, text_length, item_offset, item_length);
 }
 
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-buffer.h b/src/3rdparty/harfbuzz-ng/src/hb-buffer.h
index 3086851b01..7b0c920468 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-buffer.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-buffer.h
@@ -186,12 +186,25 @@ hb_buffer_flags_t
 hb_buffer_get_flags (hb_buffer_t *buffer);
 
 
+
+#define HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT 0xFFFDu
+
+/* Sets codepoint used to replace invalid UTF-8/16/32 entries.
+ * Default is 0xFFFDu. */
+void
+hb_buffer_set_replacement_codepoint (hb_buffer_t    *buffer,
+				     hb_codepoint_t  replacement);
+
+hb_codepoint_t
+hb_buffer_get_replacement_codepoint (hb_buffer_t    *buffer);
+
+
 /* Resets the buffer.  Afterwards it's as if it was just created,
  * except that it has a larger buffer allocated perhaps... */
 void
 hb_buffer_reset (hb_buffer_t *buffer);
 
-/* Like reset, but does NOT clear unicode_funcs. */
+/* Like reset, but does NOT clear unicode_funcs and replacement_codepoint. */
 void
 hb_buffer_clear_contents (hb_buffer_t *buffer);
 
@@ -240,6 +253,14 @@ hb_buffer_add_utf32 (hb_buffer_t    *buffer,
 		     unsigned int    item_offset,
 		     int             item_length);
 
+/* Like add_utf32 but does NOT check for invalid Unicode codepoints. */
+void
+hb_buffer_add_codepoints (hb_buffer_t          *buffer,
+			  const hb_codepoint_t *text,
+			  int                   text_length,
+			  unsigned int          item_offset,
+			  int                   item_length);
+
 
 /* Clears any new items added at the end */
 hb_bool_t
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-common.cc b/src/3rdparty/harfbuzz-ng/src/hb-common.cc
index 0fd790bc04..416d082a6b 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-common.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-common.cc
@@ -33,6 +33,10 @@
 
 #include <locale.h>
 
+#ifdef _WIN32_WCE
+#define strdup(x) _strdup(x)
+#endif
+
 
 /* hb_options_t */
 
@@ -234,6 +238,7 @@ struct hb_language_item_t {
 
 static hb_language_item_t *langs;
 
+#ifdef HAVE_ATEXIT
 static inline
 void free_langs (void)
 {
@@ -244,6 +249,7 @@ void free_langs (void)
     langs = next;
   }
 }
+#endif
 
 static hb_language_item_t *
 lang_find_or_insert (const char *key)
@@ -297,9 +303,11 @@ hb_language_from_string (const char *str, int len)
 
   if (len >= 0)
   {
+    /* NUL-terminate it. */
     len = MIN (len, (int) sizeof (strbuf) - 1);
-    str = (char *) memcpy (strbuf, str, len);
+    memcpy (strbuf, str, len);
     strbuf[len] = '\0';
+    str = strbuf;
   }
 
   hb_language_item_t *item = lang_find_or_insert (str);
@@ -367,7 +375,7 @@ hb_script_from_iso15924_tag (hb_tag_t tag)
     return HB_SCRIPT_INVALID;
 
   /* Be lenient, adjust case (one capital letter followed by three small letters) */
-  tag = (tag & 0xDFDFDFDF) | 0x00202020;
+  tag = (tag & 0xDFDFDFDFu) | 0x00202020u;
 
   switch (tag) {
 
@@ -387,7 +395,7 @@ hb_script_from_iso15924_tag (hb_tag_t tag)
   }
 
   /* If it looks right, just use the tag as a script */
-  if (((uint32_t) tag & 0xE0E0E0E0) == 0x40606060)
+  if (((uint32_t) tag & 0xE0E0E0E0u) == 0x40606060u)
     return (hb_script_t) tag;
 
   /* Otherwise, return unknown */
@@ -480,6 +488,14 @@ hb_script_get_horizontal_direction (hb_script_t script)
     case HB_SCRIPT_MEROITIC_CURSIVE:
     case HB_SCRIPT_MEROITIC_HIEROGLYPHS:
 
+    /* Unicode-7.0 additions */
+    case HB_SCRIPT_MANICHAEAN:
+    case HB_SCRIPT_MENDE_KIKAKUI:
+    case HB_SCRIPT_NABATAEAN:
+    case HB_SCRIPT_OLD_NORTH_ARABIAN:
+    case HB_SCRIPT_PALMYRENE:
+    case HB_SCRIPT_PSALTER_PAHLAVI:
+
       return HB_DIRECTION_RTL;
   }
 
@@ -557,7 +573,7 @@ hb_version_string (void)
 }
 
 /**
- * hb_version_check:
+ * hb_version_atleast:
  * @major: 
  * @minor: 
  * @micro: 
@@ -569,9 +585,9 @@ hb_version_string (void)
  * Since: 1.0
  **/
 hb_bool_t
-hb_version_check (unsigned int major,
-		  unsigned int minor,
-		  unsigned int micro)
+hb_version_atleast (unsigned int major,
+		    unsigned int minor,
+		    unsigned int micro)
 {
-  return HB_VERSION_CHECK (major, minor, micro);
+  return HB_VERSION_ATLEAST (major, minor, micro);
 }
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-common.h b/src/3rdparty/harfbuzz-ng/src/hb-common.h
index c8bfd8825a..b24cbb33ba 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-common.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-common.h
@@ -270,17 +270,6 @@ typedef enum
   /*6.1*/ HB_SCRIPT_SORA_SOMPENG		= HB_TAG ('S','o','r','a'),
   /*6.1*/ HB_SCRIPT_TAKRI			= HB_TAG ('T','a','k','r'),
 
-  /* No script set. */
-  /*---*/ HB_SCRIPT_INVALID			= HB_TAG_NONE,
-
-  /* Dummy value to ensure any hb_tag_t value can be passed/stored as hb_script_t
-   * without risking undefined behavior. */
-  /*---*/ _HB_SCRIPT_MAX_VALUE			= HB_TAG_MAX
-
-} hb_script_t;
-
-/* These are moved out of hb_script_t because glib-mkenums chokes otherwise. */
-#if 0
   /*7.0*/ HB_SCRIPT_BASSA_VAH			= HB_TAG ('B','a','s','s'),
   /*7.0*/ HB_SCRIPT_CAUCASIAN_ALBANIAN		= HB_TAG ('A','g','h','b'),
   /*7.0*/ HB_SCRIPT_DUPLOYAN			= HB_TAG ('D','u','p','l'),
@@ -292,19 +281,27 @@ typedef enum
   /*7.0*/ HB_SCRIPT_MAHAJANI			= HB_TAG ('M','a','h','j'),
   /*7.0*/ HB_SCRIPT_MANICHAEAN			= HB_TAG ('M','a','n','i'),
   /*7.0*/ HB_SCRIPT_MENDE_KIKAKUI		= HB_TAG ('M','e','n','d'),
-  /*7.0*/ HB_SCRIPT_MODI			= ???
+  /*7.0*/ HB_SCRIPT_MODI			= HB_TAG ('M','o','d','i'),
   /*7.0*/ HB_SCRIPT_MRO				= HB_TAG ('M','r','o','o'),
   /*7.0*/ HB_SCRIPT_NABATAEAN			= HB_TAG ('N','b','a','t'),
   /*7.0*/ HB_SCRIPT_OLD_NORTH_ARABIAN		= HB_TAG ('N','a','r','b'),
   /*7.0*/ HB_SCRIPT_OLD_PERMIC			= HB_TAG ('P','e','r','m'),
   /*7.0*/ HB_SCRIPT_PAHAWH_HMONG		= HB_TAG ('H','m','n','g'),
   /*7.0*/ HB_SCRIPT_PALMYRENE			= HB_TAG ('P','a','l','m'),
-  /*7.0*/ HB_SCRIPT_PAU_CIN_HAU			= ???
+  /*7.0*/ HB_SCRIPT_PAU_CIN_HAU			= HB_TAG ('P','a','u','c'),
   /*7.0*/ HB_SCRIPT_PSALTER_PAHLAVI		= HB_TAG ('P','h','l','p'),
-  /*7.0*/ HB_SCRIPT_SIDDHAM			= ???
+  /*7.0*/ HB_SCRIPT_SIDDHAM			= HB_TAG ('S','i','d','d'),
   /*7.0*/ HB_SCRIPT_TIRHUTA			= HB_TAG ('T','i','r','h'),
   /*7.0*/ HB_SCRIPT_WARANG_CITI			= HB_TAG ('W','a','r','a'),
-#endif
+
+  /* No script set. */
+  /*---*/ HB_SCRIPT_INVALID			= HB_TAG_NONE,
+
+  /* Dummy value to ensure any hb_tag_t value can be passed/stored as hb_script_t
+   * without risking undefined behavior. */
+  /*---*/ _HB_SCRIPT_MAX_VALUE			= HB_TAG_MAX
+
+} hb_script_t;
 
 
 /* Script functions */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-coretext.cc b/src/3rdparty/harfbuzz-ng/src/hb-coretext.cc
index 2507cd1d9f..e2cd2777ed 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-coretext.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-coretext.cc
@@ -31,18 +31,12 @@
 
 #include "hb-coretext.h"
 
-#include "hb-face-private.hh"
-
 
 #ifndef HB_DEBUG_CORETEXT
 #define HB_DEBUG_CORETEXT (HB_DEBUG+0)
 #endif
 
 
-HB_SHAPER_DATA_ENSURE_DECLARE(coretext, face)
-HB_SHAPER_DATA_ENSURE_DECLARE(coretext, font)
-
-
 typedef bool (*qt_get_font_table_func_t) (void *user_data, unsigned int tag, unsigned char *buffer, unsigned int *length);
 
 struct FontEngineFaceData {
@@ -56,6 +50,42 @@ struct CoreTextFontEngineData {
 };
 
 
+static void
+release_table_data (void *user_data)
+{
+  CFDataRef cf_data = reinterpret_cast<CFDataRef> (user_data);
+  CFRelease(cf_data);
+}
+
+static hb_blob_t *
+reference_table  (hb_face_t *face HB_UNUSED, hb_tag_t tag, void *user_data)
+{
+  CGFontRef cg_font = reinterpret_cast<CGFontRef> (user_data);
+  CFDataRef cf_data = CGFontCopyTableForTag (cg_font, tag);
+  if (unlikely (!cf_data))
+    return NULL;
+
+  const char *data = reinterpret_cast<const char*> (CFDataGetBytePtr (cf_data));
+  const size_t length = CFDataGetLength (cf_data);
+  if (!data || !length)
+    return NULL;
+
+  return hb_blob_create (data, length, HB_MEMORY_MODE_READONLY,
+			 reinterpret_cast<void *> (const_cast<__CFData *> (cf_data)),
+			 release_table_data);
+}
+
+hb_face_t *
+hb_coretext_face_create (CGFontRef cg_font)
+{
+  return hb_face_create_for_tables (reference_table, CGFontRetain (cg_font), (hb_destroy_func_t) CGFontRelease);
+}
+
+
+HB_SHAPER_DATA_ENSURE_DECLARE(coretext, face)
+HB_SHAPER_DATA_ENSURE_DECLARE(coretext, font)
+
+
 /*
  * shaper face data
  */
@@ -76,31 +106,33 @@ release_data (void *info, const void *data, size_t size)
 hb_coretext_shaper_face_data_t *
 _hb_coretext_shaper_face_data_create (hb_face_t *face)
 {
-  hb_blob_t *mort_blob = face->reference_table (HB_CORETEXT_TAG_MORT);
-  /* Umm, we just reference the table to check whether it exists.
-   * Maybe add better API for this? */
-  if (!hb_blob_get_length (mort_blob))
-  {
-    hb_blob_destroy (mort_blob);
-    mort_blob = face->reference_table (HB_CORETEXT_TAG_MORX);
-    if (!hb_blob_get_length (mort_blob))
-    {
-      hb_blob_destroy (mort_blob);
-      return NULL;
-    }
-  }
-  hb_blob_destroy (mort_blob);
-
   hb_coretext_shaper_face_data_t *data = (hb_coretext_shaper_face_data_t *) calloc (1, sizeof (hb_coretext_shaper_face_data_t));
   if (unlikely (!data))
     return NULL;
-
+#if 0
+  if (face->destroy == (hb_destroy_func_t) CGFontRelease)
+  {
+    data->cg_font = CGFontRetain ((CGFontRef) face->user_data);
+  }
+  else
+  {
+    hb_blob_t *blob = hb_face_reference_blob (face);
+    unsigned int blob_length;
+    const char *blob_data = hb_blob_get_data (blob, &blob_length);
+    if (unlikely (!blob_length))
+      DEBUG_MSG (CORETEXT, face, "Face has empty blob");
+
+    CGDataProviderRef provider = CGDataProviderCreateWithData (blob, blob_data, blob_length, &release_data);
+    data->cg_font = CGFontCreateWithDataProvider (provider);
+    CGDataProviderRelease (provider);
+  }
+#else
   FontEngineFaceData *fontEngineFaceData = (FontEngineFaceData *) face->user_data;
   CoreTextFontEngineData *coreTextFontEngineData = (CoreTextFontEngineData *) fontEngineFaceData->user_data;
   data->cg_font = coreTextFontEngineData->cgFont;
   if (likely (data->cg_font))
     CFRetain (data->cg_font);
-
+#endif
   if (unlikely (!data->cg_font)) {
     DEBUG_MSG (CORETEXT, face, "Face CGFontCreateWithDataProvider() failed");
     free (data);
@@ -144,13 +176,17 @@ _hb_coretext_shaper_font_data_create (hb_font_t *font)
     return NULL;
 
   hb_face_t *face = font->face;
+#if 0
+  hb_coretext_shaper_face_data_t *face_data = HB_SHAPER_DATA_GET (face);
 
+  data->ct_font = CTFontCreateWithGraphicsFont (face_data->cg_font, font->y_scale, NULL, NULL);
+#else
   FontEngineFaceData *fontEngineFaceData = (FontEngineFaceData *) face->user_data;
   CoreTextFontEngineData *coreTextFontEngineData = (CoreTextFontEngineData *) fontEngineFaceData->user_data;
   data->ct_font = coreTextFontEngineData->ctFont;
   if (likely (data->ct_font))
     CFRetain (data->ct_font);
-
+#endif
   if (unlikely (!data->ct_font)) {
     DEBUG_MSG (CORETEXT, font, "Font CTFontCreateWithGraphicsFont() failed");
     free (data);
@@ -468,7 +504,7 @@ _hb_coretext_shape (hb_shape_plan_t    *shape_plan,
       event->start = false;
       event->feature = feature;
     }
-    feature_events.sort ();
+    feature_events.qsort ();
     /* Add a strategic final event. */
     {
       active_feature_t feature;
@@ -498,14 +534,12 @@ _hb_coretext_shape (hb_shape_plan_t    *shape_plan,
 	if (unlikely (!range))
 	  goto fail_features;
 
-	unsigned int offset = feature_records.len;
-
 	if (active_features.len)
 	{
 	  CFMutableArrayRef features_array = CFArrayCreateMutable(kCFAllocatorDefault, 0, &kCFTypeArrayCallBacks);
 
 	  /* TODO sort and resolve conflicting features? */
-	  /* active_features.sort (); */
+	  /* active_features.qsort (); */
 	  for (unsigned int j = 0; j < active_features.len; j++)
 	  {
 	    CFStringRef keys[2] = {
@@ -603,13 +637,13 @@ _hb_coretext_shape (hb_shape_plan_t    *shape_plan,
   for (unsigned int i = 0; i < buffer->len; i++) {
     hb_codepoint_t c = buffer->info[i].codepoint;
     buffer->info[i].utf16_index() = chars_len;
-    if (likely (c < 0x10000))
+    if (likely (c <= 0xFFFFu))
       pchars[chars_len++] = c;
-    else if (unlikely (c >= 0x110000))
-      pchars[chars_len++] = 0xFFFD;
+    else if (unlikely (c > 0x10FFFFu))
+      pchars[chars_len++] = 0xFFFDu;
     else {
-      pchars[chars_len++] = 0xD800 + ((c - 0x10000) >> 10);
-      pchars[chars_len++] = 0xDC00 + ((c - 0x10000) & ((1 << 10) - 1));
+      pchars[chars_len++] = 0xD800u + ((c - 0x10000u) >> 10);
+      pchars[chars_len++] = 0xDC00u + ((c - 0x10000u) & ((1 << 10) - 1));
     }
   }
 
@@ -635,7 +669,7 @@ _hb_coretext_shape (hb_shape_plan_t    *shape_plan,
       hb_codepoint_t c = buffer->info[i].codepoint;
       unsigned int cluster = buffer->info[i].cluster;
       log_clusters[chars_len++] = cluster;
-      if (c >= 0x10000 && c < 0x110000)
+      if (hb_in_range (c, 0x10000u, 0x10FFFFu))
 	log_clusters[chars_len++] = cluster; /* Surrogates. */
     }
 
@@ -705,10 +739,10 @@ _hb_coretext_shape (hb_shape_plan_t    *shape_plan,
         for (CFIndex j = range.location; j < range.location + range.length; j++)
 	{
 	    UniChar ch = CFStringGetCharacterAtIndex (string_ref, j);
-	    if (hb_in_range<UniChar> (ch, 0xDC00, 0xDFFF) && range.location < j)
+	    if (hb_in_range<UniChar> (ch, 0xDC00u, 0xDFFFu) && range.location < j)
 	    {
 	      ch = CFStringGetCharacterAtIndex (string_ref, j - 1);
-	      if (hb_in_range<UniChar> (ch, 0xD800, 0xDBFF))
+	      if (hb_in_range<UniChar> (ch, 0xD800u, 0xDBFFu))
 	        /* This is the second of a surrogate pair.  Don't need .notdef
 		 * for this one. */
 	        continue;
@@ -866,3 +900,97 @@ _hb_coretext_shape (hb_shape_plan_t    *shape_plan,
 
   return true;
 }
+
+
+/*
+ * AAT shaper
+ */
+
+HB_SHAPER_DATA_ENSURE_DECLARE(coretext_aat, face)
+HB_SHAPER_DATA_ENSURE_DECLARE(coretext_aat, font)
+
+
+/*
+ * shaper face data
+ */
+
+struct hb_coretext_aat_shaper_face_data_t {};
+
+hb_coretext_aat_shaper_face_data_t *
+_hb_coretext_aat_shaper_face_data_create (hb_face_t *face)
+{
+  hb_blob_t *mort_blob = face->reference_table (HB_CORETEXT_TAG_MORT);
+  /* Umm, we just reference the table to check whether it exists.
+   * Maybe add better API for this? */
+  if (!hb_blob_get_length (mort_blob))
+  {
+    hb_blob_destroy (mort_blob);
+    mort_blob = face->reference_table (HB_CORETEXT_TAG_MORX);
+    if (!hb_blob_get_length (mort_blob))
+    {
+      hb_blob_destroy (mort_blob);
+      return NULL;
+    }
+  }
+  hb_blob_destroy (mort_blob);
+
+  return hb_coretext_shaper_face_data_ensure (face) ? (hb_coretext_aat_shaper_face_data_t *) HB_SHAPER_DATA_SUCCEEDED : NULL;
+}
+
+void
+_hb_coretext_aat_shaper_face_data_destroy (hb_coretext_aat_shaper_face_data_t *data HB_UNUSED)
+{
+}
+
+
+/*
+ * shaper font data
+ */
+
+struct hb_coretext_aat_shaper_font_data_t {};
+
+hb_coretext_aat_shaper_font_data_t *
+_hb_coretext_aat_shaper_font_data_create (hb_font_t *font)
+{
+  return hb_coretext_shaper_font_data_ensure (font) ? (hb_coretext_aat_shaper_font_data_t *) HB_SHAPER_DATA_SUCCEEDED : NULL;
+}
+
+void
+_hb_coretext_aat_shaper_font_data_destroy (hb_coretext_aat_shaper_font_data_t *data HB_UNUSED)
+{
+}
+
+
+/*
+ * shaper shape_plan data
+ */
+
+struct hb_coretext_aat_shaper_shape_plan_data_t {};
+
+hb_coretext_aat_shaper_shape_plan_data_t *
+_hb_coretext_aat_shaper_shape_plan_data_create (hb_shape_plan_t    *shape_plan HB_UNUSED,
+					     const hb_feature_t *user_features HB_UNUSED,
+					     unsigned int        num_user_features HB_UNUSED)
+{
+  return (hb_coretext_aat_shaper_shape_plan_data_t *) HB_SHAPER_DATA_SUCCEEDED;
+}
+
+void
+_hb_coretext_aat_shaper_shape_plan_data_destroy (hb_coretext_aat_shaper_shape_plan_data_t *data HB_UNUSED)
+{
+}
+
+
+/*
+ * shaper
+ */
+
+hb_bool_t
+_hb_coretext_aat_shape (hb_shape_plan_t    *shape_plan,
+			hb_font_t          *font,
+			hb_buffer_t        *buffer,
+			const hb_feature_t *features,
+			unsigned int        num_features)
+{
+  return _hb_coretext_shape (shape_plan, font, buffer, features, num_features);
+}
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-coretext.h b/src/3rdparty/harfbuzz-ng/src/hb-coretext.h
index aa4bf69a52..25267bc978 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-coretext.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-coretext.h
@@ -30,7 +30,7 @@
 #include "hb.h"
 
 #include <TargetConditionals.h>
-#if defined(TARGET_OS_IPHONE) && TARGET_OS_IPHONE
+#if TARGET_OS_IPHONE
 #  include <CoreText/CoreText.h>
 #  include <CoreGraphics/CoreGraphics.h>
 #else
@@ -44,6 +44,10 @@ HB_BEGIN_DECLS
 #define HB_CORETEXT_TAG_MORX HB_TAG('m','o','r','x')
 
 
+hb_face_t *
+hb_coretext_face_create (CGFontRef cg_font);
+
+
 CGFontRef
 hb_coretext_face_get_cg_font (hb_face_t *face);
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-mutex-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-mutex-private.hh
index 0fb21c2e86..40f2e3d152 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-mutex-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-mutex-private.hh
@@ -47,8 +47,18 @@
 #define WIN32_LEAN_AND_MEAN
 #include <windows.h>
 typedef CRITICAL_SECTION hb_mutex_impl_t;
+#ifdef _WIN32_WCE
+#define HB_MUTEX_IMPL_INIT	{ 0, 0, NULL, NULL, 0 }
+#else
 #define HB_MUTEX_IMPL_INIT	{ NULL, 0, 0, NULL, NULL, 0 }
+#endif
+
+#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_PC_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
+#define hb_mutex_impl_init(M)	InitializeCriticalSectionEx (M, 0, 0)
+#else
 #define hb_mutex_impl_init(M)	InitializeCriticalSection (M)
+#endif
+
 #define hb_mutex_impl_lock(M)	EnterCriticalSection (M)
 #define hb_mutex_impl_unlock(M)	LeaveCriticalSection (M)
 #define hb_mutex_impl_finish(M)	DeleteCriticalSection (M)
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-open-file-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-open-file-private.hh
index 250504ae20..57db59db84 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-open-file-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-open-file-private.hh
@@ -110,9 +110,9 @@ typedef struct OffsetTable
   protected:
   Tag		sfnt_version;	/* '\0\001\0\00' if TrueType / 'OTTO' if CFF */
   USHORT	numTables;	/* Number of tables. */
-  USHORT	searchRange;	/* (Maximum power of 2 <= numTables) x 16 */
-  USHORT	entrySelector;	/* Log2(maximum power of 2 <= numTables). */
-  USHORT	rangeShift;	/* NumTables x 16-searchRange. */
+  USHORT	searchRangeZ;	/* (Maximum power of 2 <= numTables) x 16 */
+  USHORT	entrySelectorZ;	/* Log2(maximum power of 2 <= numTables). */
+  USHORT	rangeShiftZ;	/* NumTables x 16-searchRange. */
   TableRecord	tables[VAR];	/* TableRecord entries. numTables items */
   public:
   DEFINE_SIZE_ARRAY (12, tables);
@@ -138,8 +138,8 @@ struct TTCHeaderVersion1
   protected:
   Tag		ttcTag;		/* TrueType Collection ID string: 'ttcf' */
   FixedVersion	version;	/* Version of the TTC Header (1.0),
-				 * 0x00010000 */
-  LongOffsetLongArrayOf<OffsetTable>
+				 * 0x00010000u */
+  ArrayOf<OffsetTo<OffsetTable, ULONG>, ULONG>
 		table;		/* Array of offsets to the OffsetTable for each font
 				 * from the beginning of the file */
   public:
@@ -184,7 +184,7 @@ struct TTCHeader
   struct {
   Tag		ttcTag;		/* TrueType Collection ID string: 'ttcf' */
   FixedVersion	version;	/* Version of the TTC Header (1.0 or 2.0),
-				 * 0x00010000 or 0x00020000 */
+				 * 0x00010000u or 0x00020000u */
   }			header;
   TTCHeaderVersion1	version1;
   } u;
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-open-type-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-open-type-private.hh
index 558103a8ec..046df97659 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-open-type-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-open-type-private.hh
@@ -42,36 +42,36 @@ namespace OT {
 
 /* Cast to struct T, reference to reference */
 template<typename Type, typename TObject>
-inline const Type& CastR(const TObject &X)
+static inline const Type& CastR(const TObject &X)
 { return reinterpret_cast<const Type&> (X); }
 template<typename Type, typename TObject>
-inline Type& CastR(TObject &X)
+static inline Type& CastR(TObject &X)
 { return reinterpret_cast<Type&> (X); }
 
 /* Cast to struct T, pointer to pointer */
 template<typename Type, typename TObject>
-inline const Type* CastP(const TObject *X)
+static inline const Type* CastP(const TObject *X)
 { return reinterpret_cast<const Type*> (X); }
 template<typename Type, typename TObject>
-inline Type* CastP(TObject *X)
+static inline Type* CastP(TObject *X)
 { return reinterpret_cast<Type*> (X); }
 
 /* StructAtOffset<T>(P,Ofs) returns the struct T& that is placed at memory
  * location pointed to by P plus Ofs bytes. */
 template<typename Type>
-inline const Type& StructAtOffset(const void *P, unsigned int offset)
+static inline const Type& StructAtOffset(const void *P, unsigned int offset)
 { return * reinterpret_cast<const Type*> ((const char *) P + offset); }
 template<typename Type>
-inline Type& StructAtOffset(void *P, unsigned int offset)
+static inline Type& StructAtOffset(void *P, unsigned int offset)
 { return * reinterpret_cast<Type*> ((char *) P + offset); }
 
 /* StructAfter<T>(X) returns the struct T& that is placed after X.
  * Works with X of variable size also.  X must implement get_size() */
 template<typename Type, typename TObject>
-inline const Type& StructAfter(const TObject &X)
+static inline const Type& StructAfter(const TObject &X)
 { return StructAtOffset<Type>(&X, X.get_size()); }
 template<typename Type, typename TObject>
-inline Type& StructAfter(TObject &X)
+static inline Type& StructAfter(TObject &X)
 { return StructAtOffset<Type>(&X, X.get_size()); }
 
 
@@ -132,7 +132,7 @@ inline Type& StructAfter(TObject &X)
 
 /* Global nul-content Null pool.  Enlarge as necessary. */
 /* TODO This really should be a extern HB_INTERNAL and defined somewhere... */
-static const void *_NullPool[64 / sizeof (void *)];
+static const void *_NullPool[(256+8) / sizeof (void *)];
 
 /* Generic nul-content Null objects. */
 template <typename Type>
@@ -145,7 +145,7 @@ static inline const Type& Null (void) {
 #define DEFINE_NULL_DATA(Type, data) \
 static const char _Null##Type[sizeof (Type) + 1] = data; /* +1 is for nul-termination in data */ \
 template <> \
-inline const Type& Null<Type> (void) { \
+/*static*/ inline const Type& Null<Type> (void) { \
   return *CastP<Type> (_Null##Type); \
 } /* The following line really exists such that we end in a place needing semicolon */ \
 ASSERT_STATIC (Type::min_size + 1 <= sizeof (_Null##Type))
@@ -266,6 +266,15 @@ struct hb_sanitize_context_t
     return TRACE_RETURN (this->writable);
   }
 
+  template <typename Type, typename ValueType>
+  inline bool try_set (Type *obj, const ValueType &v) {
+    if (this->may_edit (obj, obj->static_size)) {
+      obj->set (v);
+      return true;
+    }
+    return false;
+  }
+
   mutable unsigned int debug_depth;
   const char *start, *end;
   bool writable;
@@ -572,6 +581,7 @@ struct IntType
   DEFINE_SIZE_STATIC (Size);
 };
 
+typedef		uint8_t	     BYTE;	/* 8-bit unsigned integer. */
 typedef IntType<uint16_t, 2> USHORT;	/* 16-bit unsigned integer. */
 typedef IntType<int16_t,  2> SHORT;	/* 16-bit signed integer. */
 typedef IntType<uint32_t, 4> ULONG;	/* 32-bit unsigned integer. */
@@ -616,24 +626,17 @@ typedef USHORT GlyphID;
 
 /* Script/language-system/feature index */
 struct Index : USHORT {
-  static const unsigned int NOT_FOUND_INDEX = 0xFFFF;
+  static const unsigned int NOT_FOUND_INDEX = 0xFFFFu;
 };
 DEFINE_NULL_DATA (Index, "\xff\xff");
 
-/* Offset to a table, same as uint16 (length = 16 bits), Null offset = 0x0000 */
-struct Offset : USHORT
+/* Offset, Null offset = 0 */
+template <typename Type=USHORT>
+struct Offset : Type
 {
   inline bool is_null (void) const { return 0 == *this; }
   public:
-  DEFINE_SIZE_STATIC (2);
-};
-
-/* LongOffset to a table, same as uint32 (length = 32 bits), Null offset = 0x00000000 */
-struct LongOffset : ULONG
-{
-  inline bool is_null (void) const { return 0 == *this; }
-  public:
-  DEFINE_SIZE_STATIC (4);
+  DEFINE_SIZE_STATIC (sizeof(Type));
 };
 
 
@@ -682,12 +685,12 @@ struct FixedVersion
 
 
 /*
- * Template subclasses of Offset and LongOffset that do the dereferencing.
+ * Template subclasses of Offset that do the dereferencing.
  * Use: (base+offset)
  */
 
-template <typename OffsetType, typename Type>
-struct GenericOffsetTo : OffsetType
+template <typename Type, typename OffsetType=USHORT>
+struct OffsetTo : Offset<OffsetType>
 {
   inline const Type& operator () (const void *base) const
   {
@@ -721,40 +724,25 @@ struct GenericOffsetTo : OffsetType
     return TRACE_RETURN (likely (obj.sanitize (c, user_data)) || neuter (c));
   }
 
-  inline bool try_set (hb_sanitize_context_t *c, const OffsetType &v) {
-    if (c->may_edit (this, this->static_size)) {
-      this->set (v);
-      return true;
-    }
-    return false;
-  }
   /* Set the offset to Null */
   inline bool neuter (hb_sanitize_context_t *c) {
-    if (c->may_edit (this, this->static_size)) {
-      this->set (0); /* 0 is Null offset */
-      return true;
-    }
-    return false;
+    return c->try_set (this, 0);
   }
+  DEFINE_SIZE_STATIC (sizeof(OffsetType));
 };
 template <typename Base, typename OffsetType, typename Type>
-inline const Type& operator + (const Base &base, const GenericOffsetTo<OffsetType, Type> &offset) { return offset (base); }
+static inline const Type& operator + (const Base &base, const OffsetTo<Type, OffsetType> &offset) { return offset (base); }
 template <typename Base, typename OffsetType, typename Type>
-inline Type& operator + (Base &base, GenericOffsetTo<OffsetType, Type> &offset) { return offset (base); }
-
-template <typename Type>
-struct OffsetTo : GenericOffsetTo<Offset, Type> {};
-
-template <typename Type>
-struct LongOffsetTo : GenericOffsetTo<LongOffset, Type> {};
+static inline Type& operator + (Base &base, OffsetTo<Type, OffsetType> &offset) { return offset (base); }
 
 
 /*
  * Array Types
  */
 
-template <typename LenType, typename Type>
-struct GenericArrayOf
+/* An array with a number of elements. */
+template <typename Type, typename LenType=USHORT>
+struct ArrayOf
 {
   const Type *sub_array (unsigned int start_offset, unsigned int *pcount /* IN/OUT */) const
   {
@@ -837,6 +825,16 @@ struct GenericArrayOf
     return TRACE_RETURN (true);
   }
 
+  template <typename SearchType>
+  inline int lsearch (const SearchType &x) const
+  {
+    unsigned int count = len;
+    for (unsigned int i = 0; i < count; i++)
+      if (!this->array[i].cmp (x))
+        return i;
+    return -1;
+  }
+
   private:
   inline bool sanitize_shallow (hb_sanitize_context_t *c) {
     TRACE_SANITIZE (this);
@@ -850,26 +848,10 @@ struct GenericArrayOf
   DEFINE_SIZE_ARRAY (sizeof (LenType), array);
 };
 
-/* An array with a USHORT number of elements. */
-template <typename Type>
-struct ArrayOf : GenericArrayOf<USHORT, Type> {};
-
-/* An array with a ULONG number of elements. */
-template <typename Type>
-struct LongArrayOf : GenericArrayOf<ULONG, Type> {};
-
 /* Array of Offset's */
 template <typename Type>
 struct OffsetArrayOf : ArrayOf<OffsetTo<Type> > {};
 
-/* Array of LongOffset's */
-template <typename Type>
-struct LongOffsetArrayOf : ArrayOf<LongOffsetTo<Type> > {};
-
-/* LongArray of LongOffset's */
-template <typename Type>
-struct LongOffsetLongArrayOf : LongArrayOf<LongOffsetTo<Type> > {};
-
 /* Array of offsets relative to the beginning of the array itself. */
 template <typename Type>
 struct OffsetListOf : OffsetArrayOf<Type>
@@ -892,9 +874,8 @@ struct OffsetListOf : OffsetArrayOf<Type>
 };
 
 
-/* An array with a USHORT number of elements,
- * starting at second element. */
-template <typename Type>
+/* An array starting at second element. */
+template <typename Type, typename LenType=USHORT>
 struct HeadlessArrayOf
 {
   inline const Type& operator [] (unsigned int i) const
@@ -941,19 +922,19 @@ struct HeadlessArrayOf
     return TRACE_RETURN (true);
   }
 
-  USHORT len;
+  LenType len;
   Type array[VAR];
   public:
-  DEFINE_SIZE_ARRAY (sizeof (USHORT), array);
+  DEFINE_SIZE_ARRAY (sizeof (LenType), array);
 };
 
 
 /* An array with sorted elements.  Supports binary searching. */
-template <typename Type>
-struct SortedArrayOf : ArrayOf<Type> {
-
+template <typename Type, typename LenType=USHORT>
+struct SortedArrayOf : ArrayOf<Type, LenType>
+{
   template <typename SearchType>
-  inline int search (const SearchType &x) const
+  inline int bsearch (const SearchType &x) const
   {
     /* Hand-coded bsearch here since this is in the hot inner loop. */
     int min = 0, max = (int) this->len - 1;
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-cmap-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-cmap-table.hh
new file mode 100644
index 0000000000..d53141157d
--- /dev/null
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-cmap-table.hh
@@ -0,0 +1,517 @@
+/*
+ * Copyright © 2014  Google, Inc.
+ *
+ *  This is part of HarfBuzz, a text shaping library.
+ *
+ * Permission is hereby granted, without written agreement and without
+ * license or royalty fees, to use, copy, modify, and distribute this
+ * software and its documentation for any purpose, provided that the
+ * above copyright notice and the following two paragraphs appear in
+ * all copies of this software.
+ *
+ * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
+ * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN
+ * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
+ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO
+ * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ * Google Author(s): Behdad Esfahbod
+ */
+
+#ifndef HB_OT_CMAP_TABLE_HH
+#define HB_OT_CMAP_TABLE_HH
+
+#include "hb-open-type-private.hh"
+
+
+namespace OT {
+
+
+/*
+ * cmap -- Character To Glyph Index Mapping Table
+ */
+
+#define HB_OT_TAG_cmap HB_TAG('c','m','a','p')
+
+
+struct CmapSubtableFormat0
+{
+  inline bool get_glyph (hb_codepoint_t codepoint, hb_codepoint_t *glyph) const
+  {
+    hb_codepoint_t gid = codepoint < 256 ? glyphIdArray[codepoint] : 0;
+    if (!gid)
+      return false;
+    *glyph = gid;
+    return true;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this));
+  }
+
+  protected:
+  USHORT	format;		/* Format number is set to 0. */
+  USHORT	lengthZ;	/* Byte length of this subtable. */
+  USHORT	languageZ;	/* Ignore. */
+  BYTE		glyphIdArray[256];/* An array that maps character
+				 * code to glyph index values. */
+  public:
+  DEFINE_SIZE_STATIC (6 + 256);
+};
+
+struct CmapSubtableFormat4
+{
+  inline bool get_glyph (hb_codepoint_t codepoint, hb_codepoint_t *glyph) const
+  {
+    unsigned int segCount;
+    const USHORT *endCount;
+    const USHORT *startCount;
+    const USHORT *idDelta;
+    const USHORT *idRangeOffset;
+    const USHORT *glyphIdArray;
+    unsigned int glyphIdArrayLength;
+
+    segCount = this->segCountX2 / 2;
+    endCount = this->values;
+    startCount = endCount + segCount + 1;
+    idDelta = startCount + segCount;
+    idRangeOffset = idDelta + segCount;
+    glyphIdArray = idRangeOffset + segCount;
+    glyphIdArrayLength = (this->length - 16 - 8 * segCount) / 2;
+
+    /* Custom two-array bsearch. */
+    int min = 0, max = (int) segCount - 1;
+    unsigned int i;
+    while (min <= max)
+    {
+      int mid = (min + max) / 2;
+      if (codepoint < startCount[mid])
+        max = mid - 1;
+      else if (codepoint > endCount[mid])
+        min = mid + 1;
+      else
+      {
+	i = mid;
+	goto found;
+      }
+    }
+    return false;
+
+  found:
+    hb_codepoint_t gid;
+    unsigned int rangeOffset = idRangeOffset[i];
+    if (rangeOffset == 0)
+      gid = codepoint + idDelta[i];
+    else
+    {
+      /* Somebody has been smoking... */
+      unsigned int index = rangeOffset / 2 + (codepoint - startCount[i]) + i - segCount;
+      if (unlikely (index >= glyphIdArrayLength))
+	return false;
+      gid = glyphIdArray[index];
+      if (unlikely (!gid))
+	return false;
+      gid += idDelta[i];
+    }
+
+    *glyph = gid & 0xFFFFu;
+    return true;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c)
+  {
+    TRACE_SANITIZE (this);
+    if (unlikely (!c->check_struct (this)))
+      return TRACE_RETURN (false);
+
+    if (unlikely (!c->check_range (this, length)))
+    {
+      /* Some broken fonts have too long of a "length" value.
+       * If that is the case, just change the value to truncate
+       * the subtable at the end of the blob. */
+      uint16_t new_length = (uint16_t) MIN ((uintptr_t) 65535,
+					    (uintptr_t) (c->end -
+							 (char *) this));
+      if (!c->try_set (&length, new_length))
+	return TRACE_RETURN (false);
+    }
+
+    return TRACE_RETURN (16 + 4 * (unsigned int) segCountX2 <= length);
+  }
+
+  protected:
+  USHORT	format;		/* Format number is set to 4. */
+  USHORT	length;		/* This is the length in bytes of the
+				 * subtable. */
+  USHORT	languageZ;	/* Ignore. */
+  USHORT	segCountX2;	/* 2 x segCount. */
+  USHORT	searchRangeZ;	/* 2 * (2**floor(log2(segCount))) */
+  USHORT	entrySelectorZ;	/* log2(searchRange/2) */
+  USHORT	rangeShiftZ;	/* 2 x segCount - searchRange */
+
+  USHORT	values[VAR];
+#if 0
+  USHORT	endCount[segCount];	/* End characterCode for each segment,
+					 * last=0xFFFFu. */
+  USHORT	reservedPad;		/* Set to 0. */
+  USHORT	startCount[segCount];	/* Start character code for each segment. */
+  SHORT		idDelta[segCount];	/* Delta for all character codes in segment. */
+  USHORT	idRangeOffset[segCount];/* Offsets into glyphIdArray or 0 */
+  USHORT	glyphIdArray[VAR];	/* Glyph index array (arbitrary length) */
+#endif
+
+  public:
+  DEFINE_SIZE_ARRAY (14, values);
+};
+
+struct CmapSubtableLongGroup
+{
+  friend struct CmapSubtableFormat12;
+  friend struct CmapSubtableFormat13;
+
+  int cmp (hb_codepoint_t codepoint) const
+  {
+    if (codepoint < startCharCode) return -1;
+    if (codepoint > endCharCode)   return +1;
+    return 0;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this));
+  }
+
+  private:
+  ULONG		startCharCode;	/* First character code in this group. */
+  ULONG		endCharCode;	/* Last character code in this group. */
+  ULONG		glyphID;	/* Glyph index; interpretation depends on
+				 * subtable format. */
+  public:
+  DEFINE_SIZE_STATIC (12);
+};
+
+template <typename UINT>
+struct CmapSubtableTrimmed
+{
+  inline bool get_glyph (hb_codepoint_t codepoint, hb_codepoint_t *glyph) const
+  {
+    /* Rely on our implicit array bound-checking. */
+    hb_codepoint_t gid = glyphIdArray[codepoint - startCharCode];
+    if (!gid)
+      return false;
+    *glyph = gid;
+    return true;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this) && glyphIdArray.sanitize (c));
+  }
+
+  protected:
+  UINT		formatReserved;	/* Subtable format and (maybe) padding. */
+  UINT		lengthZ;	/* Byte length of this subtable. */
+  UINT		languageZ;	/* Ignore. */
+  UINT		startCharCode;	/* First character code covered. */
+  ArrayOf<GlyphID, UINT>
+		glyphIdArray;	/* Array of glyph index values for character
+				 * codes in the range. */
+  public:
+  DEFINE_SIZE_ARRAY (5 * sizeof (UINT), glyphIdArray);
+};
+
+struct CmapSubtableFormat6  : CmapSubtableTrimmed<USHORT> {};
+struct CmapSubtableFormat10 : CmapSubtableTrimmed<ULONG > {};
+
+template <typename T>
+struct CmapSubtableLongSegmented
+{
+  inline bool get_glyph (hb_codepoint_t codepoint, hb_codepoint_t *glyph) const
+  {
+    int i = groups.bsearch (codepoint);
+    if (i == -1)
+      return false;
+    *glyph = T::group_get_glyph (groups[i], codepoint);
+    return true;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this) && groups.sanitize (c));
+  }
+
+  protected:
+  USHORT	format;		/* Subtable format; set to 12. */
+  USHORT	reservedZ;	/* Reserved; set to 0. */
+  ULONG		lengthZ;	/* Byte length of this subtable. */
+  ULONG		languageZ;	/* Ignore. */
+  SortedArrayOf<CmapSubtableLongGroup, ULONG>
+		groups;		/* Groupings. */
+  public:
+  DEFINE_SIZE_ARRAY (16, groups);
+};
+
+struct CmapSubtableFormat12 : CmapSubtableLongSegmented<CmapSubtableFormat12>
+{
+  static inline hb_codepoint_t group_get_glyph (const CmapSubtableLongGroup &group,
+						hb_codepoint_t u)
+  { return group.glyphID + (u - group.startCharCode); }
+};
+
+struct CmapSubtableFormat13 : CmapSubtableLongSegmented<CmapSubtableFormat13>
+{
+  static inline hb_codepoint_t group_get_glyph (const CmapSubtableLongGroup &group,
+						hb_codepoint_t u HB_UNUSED)
+  { return group.glyphID; }
+};
+
+typedef enum
+{
+  GLYPH_VARIANT_NOT_FOUND = 0,
+  GLYPH_VARIANT_FOUND = 1,
+  GLYPH_VARIANT_USE_DEFAULT = 2
+} glyph_variant_t;
+
+struct UnicodeValueRange
+{
+  inline int cmp (const hb_codepoint_t &codepoint) const
+  {
+    if (codepoint < startUnicodeValue) return -1;
+    if (codepoint > startUnicodeValue + additionalCount) return +1;
+    return 0;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this));
+  }
+
+  UINT24	startUnicodeValue;	/* First value in this range. */
+  BYTE		additionalCount;	/* Number of additional values in this
+					 * range. */
+  public:
+  DEFINE_SIZE_STATIC (4);
+};
+
+typedef SortedArrayOf<UnicodeValueRange, ULONG> DefaultUVS;
+
+struct UVSMapping
+{
+  inline int cmp (const hb_codepoint_t &codepoint) const
+  {
+    return unicodeValue.cmp (codepoint);
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this));
+  }
+
+  UINT24	unicodeValue;	/* Base Unicode value of the UVS */
+  GlyphID	glyphID;	/* Glyph ID of the UVS */
+  public:
+  DEFINE_SIZE_STATIC (5);
+};
+
+typedef SortedArrayOf<UVSMapping, ULONG> NonDefaultUVS;
+
+struct VariationSelectorRecord
+{
+  inline glyph_variant_t get_glyph (hb_codepoint_t codepoint,
+				    hb_codepoint_t *glyph,
+				    const void *base) const
+  {
+    int i;
+    const DefaultUVS &defaults = base+defaultUVS;
+    i = defaults.bsearch (codepoint);
+    if (i != -1)
+      return GLYPH_VARIANT_USE_DEFAULT;
+    const NonDefaultUVS &nonDefaults = base+nonDefaultUVS;
+    i = nonDefaults.bsearch (codepoint);
+    if (i != -1)
+    {
+      *glyph = nonDefaults[i].glyphID;
+       return GLYPH_VARIANT_FOUND;
+    }
+    return GLYPH_VARIANT_NOT_FOUND;
+  }
+
+  inline int cmp (const hb_codepoint_t &variation_selector) const
+  {
+    return varSelector.cmp (variation_selector);
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c, void *base) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this) &&
+			 defaultUVS.sanitize (c, base) &&
+			 nonDefaultUVS.sanitize (c, base));
+  }
+
+  UINT24	varSelector;	/* Variation selector. */
+  OffsetTo<DefaultUVS, ULONG>
+		defaultUVS;	/* Offset to Default UVS Table. May be 0. */
+  OffsetTo<NonDefaultUVS, ULONG>
+		nonDefaultUVS;	/* Offset to Non-Default UVS Table. May be 0. */
+  public:
+  DEFINE_SIZE_STATIC (11);
+};
+
+struct CmapSubtableFormat14
+{
+  inline glyph_variant_t get_glyph_variant (hb_codepoint_t codepoint,
+					    hb_codepoint_t variation_selector,
+					    hb_codepoint_t *glyph) const
+  {
+    return record[record.bsearch(variation_selector)].get_glyph (codepoint, glyph, this);
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this) &&
+			 record.sanitize (c, this));
+  }
+
+  protected:
+  USHORT	format;		/* Format number is set to 0. */
+  ULONG		lengthZ;	/* Byte length of this subtable. */
+  SortedArrayOf<VariationSelectorRecord, ULONG>
+		record;		/* Variation selector records; sorted
+				 * in increasing order of `varSelector'. */
+  public:
+  DEFINE_SIZE_ARRAY (10, record);
+};
+
+struct CmapSubtable
+{
+  /* Note: We intentionally do NOT implement subtable formats 2 and 8. */
+
+  inline bool get_glyph (hb_codepoint_t codepoint,
+			 hb_codepoint_t *glyph) const
+  {
+    switch (u.format) {
+    case  0: return u.format0 .get_glyph(codepoint, glyph);
+    case  4: return u.format4 .get_glyph(codepoint, glyph);
+    case  6: return u.format6 .get_glyph(codepoint, glyph);
+    case 10: return u.format10.get_glyph(codepoint, glyph);
+    case 12: return u.format12.get_glyph(codepoint, glyph);
+    case 13: return u.format13.get_glyph(codepoint, glyph);
+    case 14:
+    default: return false;
+    }
+  }
+
+  inline glyph_variant_t get_glyph_variant (hb_codepoint_t codepoint,
+					    hb_codepoint_t variation_selector,
+					    hb_codepoint_t *glyph) const
+  {
+    switch (u.format) {
+    case 14: return u.format14.get_glyph_variant(codepoint, variation_selector, glyph);
+    default: return GLYPH_VARIANT_NOT_FOUND;
+    }
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    if (!u.format.sanitize (c)) return TRACE_RETURN (false);
+    switch (u.format) {
+    case  0: return TRACE_RETURN (u.format0 .sanitize (c));
+    case  4: return TRACE_RETURN (u.format4 .sanitize (c));
+    case  6: return TRACE_RETURN (u.format6 .sanitize (c));
+    case 10: return TRACE_RETURN (u.format10.sanitize (c));
+    case 12: return TRACE_RETURN (u.format12.sanitize (c));
+    case 13: return TRACE_RETURN (u.format13.sanitize (c));
+    case 14: return TRACE_RETURN (u.format14.sanitize (c));
+    default:return TRACE_RETURN (true);
+    }
+  }
+
+  protected:
+  union {
+  USHORT		format;		/* Format identifier */
+  CmapSubtableFormat0	format0;
+  CmapSubtableFormat4	format4;
+  CmapSubtableFormat6	format6;
+  CmapSubtableFormat10	format10;
+  CmapSubtableFormat12	format12;
+  CmapSubtableFormat13	format13;
+  CmapSubtableFormat14	format14;
+  } u;
+  public:
+  DEFINE_SIZE_UNION (2, format);
+};
+
+
+struct EncodingRecord
+{
+  inline int cmp (const EncodingRecord &other) const
+  {
+    int ret;
+    ret = platformID.cmp (other.platformID);
+    if (ret) return ret;
+    ret = encodingID.cmp (other.encodingID);
+    if (ret) return ret;
+    return 0;
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c, void *base) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this) &&
+			 subtable.sanitize (c, base));
+  }
+
+  USHORT	platformID;	/* Platform ID. */
+  USHORT	encodingID;	/* Platform-specific encoding ID. */
+  OffsetTo<CmapSubtable, ULONG>
+		subtable;	/* Byte offset from beginning of table to the subtable for this encoding. */
+  public:
+  DEFINE_SIZE_STATIC (8);
+};
+
+struct cmap
+{
+  static const hb_tag_t tableTag	= HB_OT_TAG_cmap;
+
+  inline const CmapSubtable *find_subtable (unsigned int platform_id,
+					    unsigned int encoding_id) const
+  {
+    EncodingRecord key;
+    key.platformID.set (platform_id);
+    key.encodingID.set (encoding_id);
+
+    /* Note: We can use bsearch, but since it has no performance
+     * implications, we use lsearch and as such accept fonts with
+     * unsorted subtable list. */
+    int result = encodingRecord./*bsearch*/lsearch (key);
+    if (result == -1 || !encodingRecord[result].subtable)
+      return NULL;
+
+    return &(this+encodingRecord[result].subtable);
+  }
+
+  inline bool sanitize (hb_sanitize_context_t *c) {
+    TRACE_SANITIZE (this);
+    return TRACE_RETURN (c->check_struct (this) &&
+			 likely (version == 0) &&
+			 encodingRecord.sanitize (c, this));
+  }
+
+  USHORT		version;	/* Table version number (0). */
+  SortedArrayOf<EncodingRecord>
+			encodingRecord;	/* Encoding tables. */
+  public:
+  DEFINE_SIZE_ARRAY (4, encodingRecord);
+};
+
+
+} /* namespace OT */
+
+
+#endif /* HB_OT_CMAP_TABLE_HH */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-font.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-font.cc
new file mode 100644
index 0000000000..c9890c5922
--- /dev/null
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-font.cc
@@ -0,0 +1,289 @@
+/*
+ * Copyright © 2011,2014  Google, Inc.
+ *
+ *  This is part of HarfBuzz, a text shaping library.
+ *
+ * Permission is hereby granted, without written agreement and without
+ * license or royalty fees, to use, copy, modify, and distribute this
+ * software and its documentation for any purpose, provided that the
+ * above copyright notice and the following two paragraphs appear in
+ * all copies of this software.
+ *
+ * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
+ * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN
+ * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
+ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO
+ * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ * Google Author(s): Behdad Esfahbod, Roozbeh Pournader
+ */
+
+#include "hb-private.hh"
+
+#include "hb-ot.h"
+
+#include "hb-font-private.hh"
+
+#include "hb-ot-cmap-table.hh"
+#include "hb-ot-hhea-table.hh"
+#include "hb-ot-hmtx-table.hh"
+
+
+
+struct hb_ot_font_t
+{
+  unsigned int num_glyphs;
+  unsigned int num_hmetrics;
+  const OT::hmtx *hmtx;
+  hb_blob_t *hmtx_blob;
+
+  const OT::CmapSubtable *cmap;
+  const OT::CmapSubtable *cmap_uvs;
+  hb_blob_t *cmap_blob;
+};
+
+
+static hb_ot_font_t *
+_hb_ot_font_create (hb_font_t *font)
+{
+  hb_ot_font_t *ot_font = (hb_ot_font_t *) calloc (1, sizeof (hb_ot_font_t));
+
+  if (unlikely (!ot_font))
+    return NULL;
+
+  ot_font->num_glyphs = font->face->get_num_glyphs ();
+
+  {
+    hb_blob_t *hhea_blob = OT::Sanitizer<OT::hhea>::sanitize (font->face->reference_table (HB_OT_TAG_hhea));
+    const OT::hhea *hhea = OT::Sanitizer<OT::hhea>::lock_instance (hhea_blob);
+    ot_font->num_hmetrics = hhea->numberOfHMetrics;
+    hb_blob_destroy (hhea_blob);
+  }
+  ot_font->hmtx_blob = OT::Sanitizer<OT::hmtx>::sanitize (font->face->reference_table (HB_OT_TAG_hmtx));
+  if (unlikely (!ot_font->num_hmetrics ||
+		2 * (ot_font->num_hmetrics + ot_font->num_glyphs) < hb_blob_get_length (ot_font->hmtx_blob)))
+  {
+    hb_blob_destroy (ot_font->hmtx_blob);
+    free (ot_font);
+    return NULL;
+  }
+  ot_font->hmtx = OT::Sanitizer<OT::hmtx>::lock_instance (ot_font->hmtx_blob);
+
+  ot_font->cmap_blob = OT::Sanitizer<OT::cmap>::sanitize (font->face->reference_table (HB_OT_TAG_cmap));
+  const OT::cmap *cmap = OT::Sanitizer<OT::cmap>::lock_instance (ot_font->cmap_blob);
+  const OT::CmapSubtable *subtable = NULL;
+  const OT::CmapSubtable *subtable_uvs = NULL;
+
+  /* 32-bit subtables. */
+  if (!subtable) subtable = cmap->find_subtable (0, 6);
+  if (!subtable) subtable = cmap->find_subtable (0, 4);
+  if (!subtable) subtable = cmap->find_subtable (3, 10);
+  /* 16-bit subtables. */
+  if (!subtable) subtable = cmap->find_subtable (0, 3);
+  if (!subtable) subtable = cmap->find_subtable (3, 1);
+  /* Meh. */
+  if (!subtable) subtable = &OT::Null(OT::CmapSubtable);
+
+  /* UVS subtable. */
+  if (!subtable_uvs) subtable_uvs = cmap->find_subtable (0, 5);
+  /* Meh. */
+  if (!subtable_uvs) subtable_uvs = &OT::Null(OT::CmapSubtable);
+
+  ot_font->cmap = subtable;
+  ot_font->cmap_uvs = subtable_uvs;
+
+  return ot_font;
+}
+
+static void
+_hb_ot_font_destroy (hb_ot_font_t *ot_font)
+{
+  hb_blob_destroy (ot_font->cmap_blob);
+  hb_blob_destroy (ot_font->hmtx_blob);
+
+  free (ot_font);
+}
+
+
+static hb_bool_t
+hb_ot_get_glyph (hb_font_t *font HB_UNUSED,
+		 void *font_data,
+		 hb_codepoint_t unicode,
+		 hb_codepoint_t variation_selector,
+		 hb_codepoint_t *glyph,
+		 void *user_data HB_UNUSED)
+
+{
+  const hb_ot_font_t *ot_font = (const hb_ot_font_t *) font_data;
+
+  if (unlikely (variation_selector))
+  {
+    switch (ot_font->cmap_uvs->get_glyph_variant (unicode,
+						  variation_selector,
+						  glyph))
+    {
+      case OT::GLYPH_VARIANT_NOT_FOUND:		return false;
+      case OT::GLYPH_VARIANT_FOUND:		return true;
+      case OT::GLYPH_VARIANT_USE_DEFAULT:	break;
+    }
+  }
+
+  return ot_font->cmap->get_glyph (unicode, glyph);
+}
+
+static hb_position_t
+hb_ot_get_glyph_h_advance (hb_font_t *font HB_UNUSED,
+			   void *font_data,
+			   hb_codepoint_t glyph,
+			   void *user_data HB_UNUSED)
+{
+  const hb_ot_font_t *ot_font = (const hb_ot_font_t *) font_data;
+
+  if (unlikely (glyph >= ot_font->num_glyphs))
+    return 0; /* Maybe better to return notdef's advance instead? */
+
+  if (glyph >= ot_font->num_hmetrics)
+    glyph = ot_font->num_hmetrics - 1;
+
+  return font->em_scale_x (ot_font->hmtx->longHorMetric[glyph].advanceWidth);
+}
+
+static hb_position_t
+hb_ot_get_glyph_v_advance (hb_font_t *font HB_UNUSED,
+			   void *font_data,
+			   hb_codepoint_t glyph,
+			   void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return 0;
+}
+
+static hb_bool_t
+hb_ot_get_glyph_h_origin (hb_font_t *font HB_UNUSED,
+			  void *font_data HB_UNUSED,
+			  hb_codepoint_t glyph HB_UNUSED,
+			  hb_position_t *x HB_UNUSED,
+			  hb_position_t *y HB_UNUSED,
+			  void *user_data HB_UNUSED)
+{
+  /* We always work in the horizontal coordinates. */
+  return true;
+}
+
+static hb_bool_t
+hb_ot_get_glyph_v_origin (hb_font_t *font HB_UNUSED,
+			  void *font_data,
+			  hb_codepoint_t glyph,
+			  hb_position_t *x,
+			  hb_position_t *y,
+			  void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return false;
+}
+
+static hb_position_t
+hb_ot_get_glyph_h_kerning (hb_font_t *font,
+			   void *font_data,
+			   hb_codepoint_t left_glyph,
+			   hb_codepoint_t right_glyph,
+			   void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return 0;
+}
+
+static hb_position_t
+hb_ot_get_glyph_v_kerning (hb_font_t *font HB_UNUSED,
+			   void *font_data HB_UNUSED,
+			   hb_codepoint_t top_glyph HB_UNUSED,
+			   hb_codepoint_t bottom_glyph HB_UNUSED,
+			   void *user_data HB_UNUSED)
+{
+  return 0;
+}
+
+static hb_bool_t
+hb_ot_get_glyph_extents (hb_font_t *font HB_UNUSED,
+			 void *font_data,
+			 hb_codepoint_t glyph,
+			 hb_glyph_extents_t *extents,
+			 void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return false;
+}
+
+static hb_bool_t
+hb_ot_get_glyph_contour_point (hb_font_t *font HB_UNUSED,
+			       void *font_data,
+			       hb_codepoint_t glyph,
+			       unsigned int point_index,
+			       hb_position_t *x,
+			       hb_position_t *y,
+			       void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return false;
+}
+
+static hb_bool_t
+hb_ot_get_glyph_name (hb_font_t *font HB_UNUSED,
+		      void *font_data,
+		      hb_codepoint_t glyph,
+		      char *name, unsigned int size,
+		      void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return false;
+}
+
+static hb_bool_t
+hb_ot_get_glyph_from_name (hb_font_t *font HB_UNUSED,
+			   void *font_data,
+			   const char *name, int len, /* -1 means nul-terminated */
+			   hb_codepoint_t *glyph,
+			   void *user_data HB_UNUSED)
+{
+  /* TODO */
+  return false;
+}
+
+
+static hb_font_funcs_t *
+_hb_ot_get_font_funcs (void)
+{
+  static const hb_font_funcs_t ot_ffuncs = {
+    HB_OBJECT_HEADER_STATIC,
+
+    true, /* immutable */
+
+    {
+#define HB_FONT_FUNC_IMPLEMENT(name) hb_ot_get_##name,
+      HB_FONT_FUNCS_IMPLEMENT_CALLBACKS
+#undef HB_FONT_FUNC_IMPLEMENT
+    }
+  };
+
+  return const_cast<hb_font_funcs_t *> (&ot_ffuncs);
+}
+
+
+void
+hb_ot_font_set_funcs (hb_font_t *font)
+{
+  hb_ot_font_t *ot_font = _hb_ot_font_create (font);
+  if (unlikely (!ot_font))
+    return;
+
+  hb_font_set_funcs (font,
+		     _hb_ot_get_font_funcs (),
+		     ot_font,
+		     (hb_destroy_func_t) _hb_ot_font_destroy);
+}
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-font.h b/src/3rdparty/harfbuzz-ng/src/hb-ot-font.h
new file mode 100644
index 0000000000..7a8c04ac33
--- /dev/null
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-font.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright © 2014  Google, Inc.
+ *
+ *  This is part of HarfBuzz, a text shaping library.
+ *
+ * Permission is hereby granted, without written agreement and without
+ * license or royalty fees, to use, copy, modify, and distribute this
+ * software and its documentation for any purpose, provided that the
+ * above copyright notice and the following two paragraphs appear in
+ * all copies of this software.
+ *
+ * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
+ * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN
+ * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
+ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO
+ * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ * Google Author(s): Behdad Esfahbod, Roozbeh Pournader
+ */
+
+#ifndef HB_OT_FONT_H
+#define HB_OT_FONT_H
+
+#include "hb.h"
+
+HB_BEGIN_DECLS
+
+
+void
+hb_ot_font_set_funcs (hb_font_t *font);
+
+
+HB_END_DECLS
+
+#endif /* HB_OT_FONT_H */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-head-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-head-table.hh
index 0285f0cf31..ec4e8c9d45 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-head-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-head-table.hh
@@ -58,12 +58,12 @@ struct head
 
   protected:
   FixedVersion	version;		/* Version of the head table--currently
-					 * 0x00010000 for version 1.0. */
+					 * 0x00010000u for version 1.0. */
   FixedVersion	fontRevision;		/* Set by font manufacturer. */
   ULONG		checkSumAdjustment;	/* To compute: set it to 0, sum the
 					 * entire font as ULONG, then store
-					 * 0xB1B0AFBA - sum. */
-  ULONG		magicNumber;		/* Set to 0x5F0F3CF5. */
+					 * 0xB1B0AFBAu - sum. */
+  ULONG		magicNumber;		/* Set to 0x5F0F3CF5u. */
   USHORT	flags;			/* Bit 0: Baseline for font at y=0;
 					 * Bit 1: Left sidebearing point at x=0;
 					 * Bit 2: Instructions may depend on point size;
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-hhea-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-hhea-table.hh
index 611de8a666..d433200165 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-hhea-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-hhea-table.hh
@@ -49,8 +49,8 @@ struct hhea
     return TRACE_RETURN (c->check_struct (this) && likely (version.major == 1));
   }
 
-  protected:
-  FixedVersion	version;		/* 0x00010000 for version 1.0. */
+  public:
+  FixedVersion	version;		/* 0x00010000u for version 1.0. */
   FWORD		ascender;		/* Typographic ascent. <a
 					 * href="http://developer.apple.com/fonts/TTRefMan/RM06/Chap6hhea.html">
 					 * (Distance from baseline of highest
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-hmtx-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-hmtx-table.hh
index d107cf990a..e918e3b3f4 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-hmtx-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-hmtx-table.hh
@@ -59,7 +59,7 @@ struct hmtx
     return TRACE_RETURN (true);
   }
 
-  protected:
+  public:
   LongHorMetric	longHorMetric[VAR];	/* Paired advance width and left side
 					 * bearing values for each glyph. The
 					 * value numOfHMetrics comes from
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-common-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-common-private.hh
index 02d0d0f87c..abd063c896 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-common-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-common-private.hh
@@ -103,7 +103,8 @@ struct RecordArrayOf : SortedArrayOf<Record<Type> > {
   }
   inline bool find_index (hb_tag_t tag, unsigned int *index) const
   {
-    int i = this->search (tag);
+    /* If we want to allow non-sorted data, we can lsearch(). */
+    int i = this->/*lsearch*/bsearch (tag);
     if (i != -1) {
         if (index) *index = i;
         return true;
@@ -189,10 +190,10 @@ struct LangSys
 					   unsigned int *feature_indexes /* OUT */) const
   { return featureIndex.get_indexes (start_offset, feature_count, feature_indexes); }
 
-  inline bool has_required_feature (void) const { return reqFeatureIndex != 0xffff; }
+  inline bool has_required_feature (void) const { return reqFeatureIndex != 0xFFFFu; }
   inline unsigned int get_required_feature_index (void) const
   {
-    if (reqFeatureIndex == 0xffff)
+    if (reqFeatureIndex == 0xFFFFu)
       return Index::NOT_FOUND_INDEX;
    return reqFeatureIndex;;
   }
@@ -203,11 +204,11 @@ struct LangSys
     return TRACE_RETURN (c->check_struct (this) && featureIndex.sanitize (c));
   }
 
-  Offset	lookupOrder;	/* = Null (reserved for an offset to a
+  Offset<>	lookupOrderZ;	/* = Null (reserved for an offset to a
 				 * reordering table) */
   USHORT	reqFeatureIndex;/* Index of a feature required for this
 				 * language system--if no required features
-				 * = 0xFFFF */
+				 * = 0xFFFFu */
   IndexArray	featureIndex;	/* Array of indices into the FeatureList */
   public:
   DEFINE_SIZE_ARRAY (6, featureIndex);
@@ -447,9 +448,9 @@ struct FeatureParams
     TRACE_SANITIZE (this);
     if (tag == HB_TAG ('s','i','z','e'))
       return TRACE_RETURN (u.size.sanitize (c));
-    if ((tag & 0xFFFF0000) == HB_TAG ('s','s','\0','\0')) /* ssXX */
+    if ((tag & 0xFFFF0000u) == HB_TAG ('s','s','\0','\0')) /* ssXX */
       return TRACE_RETURN (u.stylisticSet.sanitize (c));
-    if ((tag & 0xFFFF0000) == HB_TAG ('c','v','\0','\0')) /* cvXX */
+    if ((tag & 0xFFFF0000u) == HB_TAG ('c','v','\0','\0')) /* cvXX */
       return TRACE_RETURN (u.characterVariants.sanitize (c));
     return TRACE_RETURN (true);
   }
@@ -501,11 +502,11 @@ struct Feature
      * Adobe tools, only the 'size' feature had FeatureParams defined.
      */
 
-    Offset orig_offset = featureParams;
+    OffsetTo<FeatureParams> orig_offset = featureParams;
     if (unlikely (!featureParams.sanitize (c, this, closure ? closure->tag : HB_TAG_NONE)))
       return TRACE_RETURN (false);
 
-    if (likely (!orig_offset))
+    if (likely (orig_offset.is_null ()))
       return TRACE_RETURN (true);
 
     if (featureParams == 0 && closure &&
@@ -513,13 +514,13 @@ struct Feature
 	closure->list_base && closure->list_base < this)
     {
       unsigned int new_offset_int = (unsigned int) orig_offset -
-				    ((char *) this - (char *) closure->list_base);
+				    (((char *) this) - ((char *) closure->list_base));
 
-      Offset new_offset;
+      OffsetTo<FeatureParams> new_offset;
       /* Check that it did not overflow. */
       new_offset.set (new_offset_int);
       if (new_offset == new_offset_int &&
-	  featureParams.try_set (c, new_offset) &&
+	  c->try_set (&featureParams, new_offset) &&
 	  !featureParams.sanitize (c, this, closure ? closure->tag : HB_TAG_NONE))
 	return TRACE_RETURN (false);
     }
@@ -584,7 +585,7 @@ struct Lookup
     TRACE_SERIALIZE (this);
     if (unlikely (!c->extend_min (*this))) return TRACE_RETURN (false);
     lookupType.set (lookup_type);
-    lookupFlag.set (lookup_props & 0xFFFF);
+    lookupFlag.set (lookup_props & 0xFFFFu);
     if (unlikely (!subTable.serialize (c, num_subtables))) return TRACE_RETURN (false);
     if (lookupFlag & LookupFlag::UseMarkFilteringSet)
     {
@@ -608,7 +609,7 @@ struct Lookup
 
   USHORT	lookupType;		/* Different enumerations for GSUB and GPOS */
   USHORT	lookupFlag;		/* Lookup qualifiers */
-  ArrayOf<Offset>
+  ArrayOf<Offset<> >
 		subTable;		/* Array of SubTables */
   USHORT	markFilteringSetX[VAR];	/* Index (base 0) into GDEF mark glyph sets
 					 * structure. This field is only present if bit
@@ -631,7 +632,7 @@ struct CoverageFormat1
   private:
   inline unsigned int get_coverage (hb_codepoint_t glyph_id) const
   {
-    int i = glyphArray.search (glyph_id);
+    int i = glyphArray.bsearch (glyph_id);
     ASSERT_STATIC (((unsigned int) -1) == NOT_COVERED);
     return i;
   }
@@ -696,7 +697,7 @@ struct CoverageFormat2
   private:
   inline unsigned int get_coverage (hb_codepoint_t glyph_id) const
   {
-    int i = rangeRecord.search (glyph_id);
+    int i = rangeRecord.bsearch (glyph_id);
     if (i != -1) {
       const RangeRecord &range = rangeRecord[i];
       return (unsigned int) range.value + (glyph_id - range.start);
@@ -992,7 +993,7 @@ struct ClassDefFormat2
   private:
   inline unsigned int get_class (hb_codepoint_t glyph_id) const
   {
-    int i = rangeRecord.search (glyph_id);
+    int i = rangeRecord.bsearch (glyph_id);
     if (i != -1)
       return rangeRecord[i].value;
     return 0;
@@ -1130,7 +1131,7 @@ struct Device
 
     unsigned int byte = deltaValue[s >> (4 - f)];
     unsigned int bits = (byte >> (16 - (((s & ((1 << (4 - f)) - 1)) + 1) << f)));
-    unsigned int mask = (0xFFFF >> (16 - (1 << f)));
+    unsigned int mask = (0xFFFFu >> (16 - (1 << f)));
 
     int delta = bits & mask;
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gdef-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gdef-table.hh
index 389cbb9e39..84a5e797c6 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gdef-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gdef-table.hh
@@ -282,7 +282,7 @@ struct MarkGlyphSetsFormat1
 
   protected:
   USHORT	format;			/* Format identifier--format = 1 */
-  LongOffsetArrayOf<Coverage>
+  ArrayOf<OffsetTo<Coverage, ULONG> >
 		coverage;		/* Array of long offsets to mark set
 					 * coverage tables */
   public:
@@ -360,9 +360,9 @@ struct GDEF
 				      hb_position_t *caret_array /* OUT */) const
   { return (this+ligCaretList).get_lig_carets (font, direction, glyph_id, start_offset, caret_count, caret_array); }
 
-  inline bool has_mark_sets (void) const { return version.to_int () >= 0x00010002 && markGlyphSetsDef[0] != 0; }
+  inline bool has_mark_sets (void) const { return version.to_int () >= 0x00010002u && markGlyphSetsDef[0] != 0; }
   inline bool mark_set_covers (unsigned int set_index, hb_codepoint_t glyph_id) const
-  { return version.to_int () >= 0x00010002 && (this+markGlyphSetsDef[0]).covers (set_index, glyph_id); }
+  { return version.to_int () >= 0x00010002u && (this+markGlyphSetsDef[0]).covers (set_index, glyph_id); }
 
   inline bool sanitize (hb_sanitize_context_t *c) {
     TRACE_SANITIZE (this);
@@ -372,7 +372,7 @@ struct GDEF
 			 attachList.sanitize (c, this) &&
 			 ligCaretList.sanitize (c, this) &&
 			 markAttachClassDef.sanitize (c, this) &&
-			 (version.to_int () < 0x00010002 || markGlyphSetsDef[0].sanitize (c, this)));
+			 (version.to_int () < 0x00010002u || markGlyphSetsDef[0].sanitize (c, this)));
   }
 
 
@@ -400,7 +400,7 @@ struct GDEF
 
   protected:
   FixedVersion	version;		/* Version of the GDEF table--currently
-					 * 0x00010002 */
+					 * 0x00010002u */
   OffsetTo<ClassDef>
 		glyphClassDef;		/* Offset to class definition table
 					 * for glyph type--from beginning of
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gpos-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gpos-table.hh
index 7c0a4ea666..d8e3e6e11d 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gpos-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gpos-table.hh
@@ -49,18 +49,18 @@ typedef Value ValueRecord[VAR];
 struct ValueFormat : USHORT
 {
   enum Flags {
-    xPlacement	= 0x0001,	/* Includes horizontal adjustment for placement */
-    yPlacement	= 0x0002,	/* Includes vertical adjustment for placement */
-    xAdvance	= 0x0004,	/* Includes horizontal adjustment for advance */
-    yAdvance	= 0x0008,	/* Includes vertical adjustment for advance */
-    xPlaDevice	= 0x0010,	/* Includes horizontal Device table for placement */
-    yPlaDevice	= 0x0020,	/* Includes vertical Device table for placement */
-    xAdvDevice	= 0x0040,	/* Includes horizontal Device table for advance */
-    yAdvDevice	= 0x0080,	/* Includes vertical Device table for advance */
-    ignored	= 0x0F00,	/* Was used in TrueType Open for MM fonts */
-    reserved	= 0xF000,	/* For future use */
-
-    devices	= 0x00F0	/* Mask for having any Device table */
+    xPlacement	= 0x0001u,	/* Includes horizontal adjustment for placement */
+    yPlacement	= 0x0002u,	/* Includes vertical adjustment for placement */
+    xAdvance	= 0x0004u,	/* Includes horizontal adjustment for advance */
+    yAdvance	= 0x0008u,	/* Includes vertical adjustment for advance */
+    xPlaDevice	= 0x0010u,	/* Includes horizontal Device table for placement */
+    yPlaDevice	= 0x0020u,	/* Includes vertical Device table for placement */
+    xAdvDevice	= 0x0040u,	/* Includes horizontal Device table for advance */
+    yAdvDevice	= 0x0080u,	/* Includes vertical Device table for advance */
+    ignored	= 0x0F00u,	/* Was used in TrueType Open for MM fonts */
+    reserved	= 0xF000u,	/* For future use */
+
+    devices	= 0x00F0u	/* Mask for having any Device table */
   };
 
 /* All fields are options.  Only those available advance the value pointer. */
@@ -1608,14 +1608,14 @@ GPOS::position_finish (hb_font_t *font HB_UNUSED, hb_buffer_t *buffer)
 /* Out-of-class implementation for methods recursing */
 
 template <typename context_t>
-inline typename context_t::return_t PosLookup::dispatch_recurse_func (context_t *c, unsigned int lookup_index)
+/*static*/ inline typename context_t::return_t PosLookup::dispatch_recurse_func (context_t *c, unsigned int lookup_index)
 {
   const GPOS &gpos = *(hb_ot_layout_from_face (c->face)->gpos);
   const PosLookup &l = gpos.get_lookup (lookup_index);
   return l.dispatch (c);
 }
 
-inline bool PosLookup::apply_recurse_func (hb_apply_context_t *c, unsigned int lookup_index)
+/*static*/ inline bool PosLookup::apply_recurse_func (hb_apply_context_t *c, unsigned int lookup_index)
 {
   const GPOS &gpos = *(hb_ot_layout_from_face (c->face)->gpos);
   const PosLookup &l = gpos.get_lookup (lookup_index);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsub-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsub-table.hh
index 76b4f33c70..e1939735de 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsub-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsub-table.hh
@@ -44,7 +44,7 @@ struct SingleSubstFormat1
     for (iter.init (this+coverage); iter.more (); iter.next ()) {
       hb_codepoint_t glyph_id = iter.get_glyph ();
       if (c->glyphs->has (glyph_id))
-	c->glyphs->add ((glyph_id + deltaGlyphID) & 0xFFFF);
+	c->glyphs->add ((glyph_id + deltaGlyphID) & 0xFFFFu);
     }
   }
 
@@ -55,7 +55,7 @@ struct SingleSubstFormat1
     for (iter.init (this+coverage); iter.more (); iter.next ()) {
       hb_codepoint_t glyph_id = iter.get_glyph ();
       c->input->add (glyph_id);
-      c->output->add ((glyph_id + deltaGlyphID) & 0xFFFF);
+      c->output->add ((glyph_id + deltaGlyphID) & 0xFFFFu);
     }
   }
 
@@ -79,7 +79,7 @@ struct SingleSubstFormat1
 
     /* According to the Adobe Annotated OpenType Suite, result is always
      * limited to 16bit. */
-    glyph_id = (glyph_id + deltaGlyphID) & 0xFFFF;
+    glyph_id = (glyph_id + deltaGlyphID) & 0xFFFFu;
     c->replace_glyph (glyph_id);
 
     return TRACE_RETURN (true);
@@ -270,23 +270,34 @@ struct Sequence
   inline bool apply (hb_apply_context_t *c) const
   {
     TRACE_APPLY (this);
-    if (unlikely (!substitute.len)) return TRACE_RETURN (false);
-
-    unsigned int klass = _hb_glyph_info_is_ligature (&c->buffer->cur()) ?
-			 HB_OT_LAYOUT_GLYPH_PROPS_BASE_GLYPH : 0;
     unsigned int count = substitute.len;
-    if (count == 1) /* Special-case to make it in-place. */
+
+    /* TODO:
+     * Testing shows that Uniscribe actually allows zero-len susbstitute,
+     * which essentially deletes a glyph.  We don't allow for now.  It
+     * can be confusing to the client since the cluster from the deleted
+     * glyph won't be merged with any output cluster...  Also, currently
+     * buffer->move_to() makes assumptions about this too.  Perhaps fix
+     * in the future after figuring out what to do with the clusters.
+     */
+    if (unlikely (!count)) return TRACE_RETURN (false);
+
+    /* Special-case to make it in-place and not consider this
+     * as a "multiplied" substitution. */
+    if (unlikely (count == 1))
     {
       c->replace_glyph (substitute.array[0]);
+      return TRACE_RETURN (true);
     }
-    else
-    {
-      for (unsigned int i = 0; i < count; i++) {
-	_hb_glyph_info_set_lig_props_for_component (&c->buffer->cur(), i);
-	c->output_glyph (substitute.array[i], klass);
-      }
-      c->buffer->skip_glyph ();
+
+    unsigned int klass = _hb_glyph_info_is_ligature (&c->buffer->cur()) ?
+			 HB_OT_LAYOUT_GLYPH_PROPS_BASE_GLYPH : 0;
+
+    for (unsigned int i = 0; i < count; i++) {
+      _hb_glyph_info_set_lig_props_for_component (&c->buffer->cur(), i);
+      c->output_glyph_for_component (substitute.array[i], klass);
     }
+    c->buffer->skip_glyph ();
 
     return TRACE_RETURN (true);
   }
@@ -624,7 +635,16 @@ struct Ligature
   {
     TRACE_APPLY (this);
     unsigned int count = component.len;
-    if (unlikely (count < 1)) return TRACE_RETURN (false);
+
+    if (unlikely (!count)) return TRACE_RETURN (false);
+
+    /* Special-case to make it in-place and not consider this
+     * as a "ligated" substitution. */
+    if (unlikely (count == 1))
+    {
+      c->replace_glyph (ligGlyph);
+      return TRACE_RETURN (true);
+    }
 
     bool is_mark_ligature = false;
     unsigned int total_component_count = 0;
@@ -1338,7 +1358,7 @@ GSUB::substitute_finish (hb_font_t *font HB_UNUSED, hb_buffer_t *buffer HB_UNUSE
 
 /* Out-of-class implementation for methods recursing */
 
-inline bool ExtensionSubst::is_reverse (void) const
+/*static*/ inline bool ExtensionSubst::is_reverse (void) const
 {
   unsigned int type = get_type ();
   if (unlikely (type == SubstLookupSubTable::Extension))
@@ -1347,14 +1367,14 @@ inline bool ExtensionSubst::is_reverse (void) const
 }
 
 template <typename context_t>
-inline typename context_t::return_t SubstLookup::dispatch_recurse_func (context_t *c, unsigned int lookup_index)
+/*static*/ inline typename context_t::return_t SubstLookup::dispatch_recurse_func (context_t *c, unsigned int lookup_index)
 {
   const GSUB &gsub = *(hb_ot_layout_from_face (c->face)->gsub);
   const SubstLookup &l = gsub.get_lookup (lookup_index);
   return l.dispatch (c);
 }
 
-inline bool SubstLookup::apply_recurse_func (hb_apply_context_t *c, unsigned int lookup_index)
+/*static*/ inline bool SubstLookup::apply_recurse_func (hb_apply_context_t *c, unsigned int lookup_index)
 {
   const GSUB &gsub = *(hb_ot_layout_from_face (c->face)->gsub);
   const SubstLookup &l = gsub.get_lookup (lookup_index);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsubgpos-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsubgpos-private.hh
index bdd773e36b..546ff4b0fd 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsubgpos-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-gsubgpos-private.hh
@@ -349,11 +349,7 @@ struct hb_apply_context_t
     may_skip (const hb_apply_context_t *c,
 	      const hb_glyph_info_t    &info) const
     {
-      unsigned int property;
-
-      property = _hb_glyph_info_get_glyph_props (&info);
-
-      if (!c->match_properties (info.codepoint, property, lookup_props))
+      if (!c->check_glyph_property (&info, lookup_props))
 	return SKIP_YES;
 
       if (unlikely (_hb_glyph_info_is_default_ignorable (&info) &&
@@ -487,7 +483,6 @@ struct hb_apply_context_t
 	const hb_glyph_info_t &info = c->buffer->out_info[idx];
 
 	matcher_t::may_skip_t skip = matcher.may_skip (c, info);
-
 	if (unlikely (skip == matcher_t::SKIP_YES))
 	  continue;
 
@@ -538,10 +533,12 @@ struct hb_apply_context_t
   }
 
   inline bool
-  match_properties (hb_codepoint_t  glyph,
-		    unsigned int    glyph_props,
-		    unsigned int    lookup_props) const
+  check_glyph_property (const hb_glyph_info_t *info,
+			unsigned int  lookup_props) const
   {
+    hb_codepoint_t glyph = info->codepoint;
+    unsigned int glyph_props = _hb_glyph_info_get_glyph_props (info);
+
     /* Not covered, if, for example, glyph class is ligature and
      * lookup_props includes LookupFlags::IgnoreLigatures
      */
@@ -554,26 +551,27 @@ struct hb_apply_context_t
     return true;
   }
 
-  inline bool
-  check_glyph_property (hb_glyph_info_t *info,
-			unsigned int  lookup_props) const
-  {
-    unsigned int property;
-
-    property = _hb_glyph_info_get_glyph_props (info);
-
-    return match_properties (info->codepoint, property, lookup_props);
-  }
-
   inline void _set_glyph_props (hb_codepoint_t glyph_index,
 			  unsigned int class_guess = 0,
-			  bool ligature = false) const
+			  bool ligature = false,
+			  bool component = false) const
   {
     unsigned int add_in = _hb_glyph_info_get_glyph_props (&buffer->cur()) &
 			  HB_OT_LAYOUT_GLYPH_PROPS_PRESERVE;
     add_in |= HB_OT_LAYOUT_GLYPH_PROPS_SUBSTITUTED;
     if (ligature)
+    {
       add_in |= HB_OT_LAYOUT_GLYPH_PROPS_LIGATED;
+      /* In the only place that the MULTIPLIED bit is used, Uniscribe
+       * seems to only care about the "last" transformation between
+       * Ligature and Multiple substitions.  Ie. if you ligate, expand,
+       * and ligate again, it forgives the multiplication and acts as
+       * if only ligation happened.  As such, clear MULTIPLIED bit.
+       */
+      add_in &= ~HB_OT_LAYOUT_GLYPH_PROPS_MULTIPLIED;
+    }
+    if (component)
+      add_in |= HB_OT_LAYOUT_GLYPH_PROPS_MULTIPLIED;
     if (likely (has_glyph_classes))
       _hb_glyph_info_set_glyph_props (&buffer->cur(), add_in | gdef.get_glyph_props (glyph_index));
     else if (class_guess)
@@ -596,10 +594,10 @@ struct hb_apply_context_t
     _set_glyph_props (glyph_index, class_guess, true);
     buffer->replace_glyph (glyph_index);
   }
-  inline void output_glyph (hb_codepoint_t glyph_index,
-			    unsigned int class_guess) const
+  inline void output_glyph_for_component (hb_codepoint_t glyph_index,
+					  unsigned int class_guess) const
   {
-    _set_glyph_props (glyph_index, class_guess);
+    _set_glyph_props (glyph_index, class_guess, false, true);
     buffer->output_glyph (glyph_index);
   }
 };
@@ -882,6 +880,7 @@ static inline void ligate_input (hb_apply_context_t *c,
 	break;
     }
   }
+  TRACE_RETURN (true);
 }
 
 static inline bool match_backtrack (hb_apply_context_t *c,
@@ -994,7 +993,9 @@ static inline bool apply_lookup (hb_apply_context_t *c,
 
     /* Recursed lookup changed buffer len.  Adjust. */
 
-    /* end can't go back past the current match position. */
+    /* end can't go back past the current match position.
+     * Note: this is only true because we do NOT allow MultipleSubst
+     * with zero sequence len. */
     end = MAX ((int) match_positions[idx] + 1, int (end) + delta);
 
     unsigned int next = idx + 1; /* next now is the position after the recursed lookup. */
@@ -2253,8 +2254,8 @@ struct GSUBGPOS
 
   inline unsigned int get_feature_count (void) const
   { return (this+featureList).len; }
-  inline const Tag& get_feature_tag (unsigned int i) const
-  { return (this+featureList).get_tag (i); }
+  inline hb_tag_t get_feature_tag (unsigned int i) const
+  { return i == Index::NOT_FOUND_INDEX ? HB_TAG_NONE : (this+featureList).get_tag (i); }
   inline unsigned int get_feature_tags (unsigned int start_offset,
 					unsigned int *feature_count /* IN/OUT */,
 					hb_tag_t     *feature_tags /* OUT */) const
@@ -2279,7 +2280,7 @@ struct GSUBGPOS
 
   protected:
   FixedVersion	version;	/* Version of the GSUB/GPOS table--initially set
-				 * to 0x00010000 */
+				 * to 0x00010000u */
   OffsetTo<ScriptList>
 		scriptList;  	/* ScriptList table */
   OffsetTo<FeatureList>
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-jstf-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-jstf-table.hh
index 79eb859566..67a6df5b42 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-jstf-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-jstf-table.hh
@@ -214,7 +214,7 @@ struct JSTF
 
   protected:
   FixedVersion	version;	/* Version of the JSTF table--initially set
-				 * to 0x00010000 */
+				 * to 0x00010000u */
   RecordArrayOf<JstfScript>
 		scriptList;  	/* Array of JstfScripts--listed
 				 * alphabetically by ScriptTag */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-private.hh
index 0a0a54b25d..9b06300800 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout-private.hh
@@ -50,9 +50,11 @@ typedef enum
   /* The following are used internally; not derived from GDEF. */
   HB_OT_LAYOUT_GLYPH_PROPS_SUBSTITUTED	= 0x10u,
   HB_OT_LAYOUT_GLYPH_PROPS_LIGATED	= 0x20u,
+  HB_OT_LAYOUT_GLYPH_PROPS_MULTIPLIED	= 0x40u,
 
   HB_OT_LAYOUT_GLYPH_PROPS_PRESERVE     = HB_OT_LAYOUT_GLYPH_PROPS_SUBSTITUTED |
-					  HB_OT_LAYOUT_GLYPH_PROPS_LIGATED
+					  HB_OT_LAYOUT_GLYPH_PROPS_LIGATED |
+					  HB_OT_LAYOUT_GLYPH_PROPS_MULTIPLIED
 } hb_ot_layout_glyph_class_mask_t;
 
 
@@ -182,62 +184,62 @@ enum {
   MASK0_GEN_CAT   = 0x1Fu
 };
 
-inline void
+static inline void
 _hb_glyph_info_set_unicode_props (hb_glyph_info_t *info, hb_unicode_funcs_t *unicode)
 {
   /* XXX This shouldn't be inlined, or at least not while is_default_ignorable() is inline. */
   info->unicode_props0() = ((unsigned int) unicode->general_category (info->codepoint)) |
 			   (unicode->is_default_ignorable (info->codepoint) ? MASK0_IGNORABLE : 0) |
-			   (info->codepoint == 0x200C ? MASK0_ZWNJ : 0) |
-			   (info->codepoint == 0x200D ? MASK0_ZWJ : 0);
+			   (info->codepoint == 0x200Cu ? MASK0_ZWNJ : 0) |
+			   (info->codepoint == 0x200Du ? MASK0_ZWJ : 0);
   info->unicode_props1() = unicode->modified_combining_class (info->codepoint);
 }
 
-inline void
+static inline void
 _hb_glyph_info_set_general_category (hb_glyph_info_t *info,
 				     hb_unicode_general_category_t gen_cat)
 {
   info->unicode_props0() = (unsigned int) gen_cat | ((info->unicode_props0()) & ~MASK0_GEN_CAT);
 }
 
-inline hb_unicode_general_category_t
+static inline hb_unicode_general_category_t
 _hb_glyph_info_get_general_category (const hb_glyph_info_t *info)
 {
   return (hb_unicode_general_category_t) (info->unicode_props0() & MASK0_GEN_CAT);
 }
 
-inline void
+static inline void
 _hb_glyph_info_set_modified_combining_class (hb_glyph_info_t *info,
 					     unsigned int modified_class)
 {
   info->unicode_props1() = modified_class;
 }
 
-inline unsigned int
+static inline unsigned int
 _hb_glyph_info_get_modified_combining_class (const hb_glyph_info_t *info)
 {
   return info->unicode_props1();
 }
 
-inline hb_bool_t
+static inline hb_bool_t
 _hb_glyph_info_is_default_ignorable (const hb_glyph_info_t *info)
 {
   return !!(info->unicode_props0() & MASK0_IGNORABLE);
 }
 
-inline hb_bool_t
+static inline hb_bool_t
 _hb_glyph_info_is_zwnj (const hb_glyph_info_t *info)
 {
   return !!(info->unicode_props0() & MASK0_ZWNJ);
 }
 
-inline hb_bool_t
+static inline hb_bool_t
 _hb_glyph_info_is_zwj (const hb_glyph_info_t *info)
 {
   return !!(info->unicode_props0() & MASK0_ZWJ);
 }
 
-inline void
+static inline void
 _hb_glyph_info_flip_joiners (hb_glyph_info_t *info)
 {
   info->unicode_props0() ^= MASK0_ZWNJ | MASK0_ZWJ;
@@ -339,31 +341,31 @@ _hb_allocate_lig_id (hb_buffer_t *buffer) {
 
 /* glyph_props: */
 
-inline void
+static inline void
 _hb_glyph_info_set_glyph_props (hb_glyph_info_t *info, unsigned int props)
 {
   info->glyph_props() = props;
 }
 
-inline unsigned int
+static inline unsigned int
 _hb_glyph_info_get_glyph_props (const hb_glyph_info_t *info)
 {
   return info->glyph_props();
 }
 
-inline bool
+static inline bool
 _hb_glyph_info_is_base_glyph (const hb_glyph_info_t *info)
 {
   return !!(info->glyph_props() & HB_OT_LAYOUT_GLYPH_PROPS_BASE_GLYPH);
 }
 
-inline bool
+static inline bool
 _hb_glyph_info_is_ligature (const hb_glyph_info_t *info)
 {
   return !!(info->glyph_props() & HB_OT_LAYOUT_GLYPH_PROPS_LIGATURE);
 }
 
-inline bool
+static inline bool
 _hb_glyph_info_is_mark (const hb_glyph_info_t *info)
 {
   return !!(info->glyph_props() & HB_OT_LAYOUT_GLYPH_PROPS_MARK);
@@ -381,23 +383,43 @@ _hb_glyph_info_ligated (const hb_glyph_info_t *info)
   return !!(info->glyph_props() & HB_OT_LAYOUT_GLYPH_PROPS_LIGATED);
 }
 
+static inline bool
+_hb_glyph_info_multiplied (const hb_glyph_info_t *info)
+{
+  return !!(info->glyph_props() & HB_OT_LAYOUT_GLYPH_PROPS_MULTIPLIED);
+}
+
+static inline bool
+_hb_glyph_info_ligated_and_didnt_multiply (const hb_glyph_info_t *info)
+{
+  return _hb_glyph_info_ligated (info) && !_hb_glyph_info_multiplied (info);
+}
+
+static inline void
+_hb_glyph_info_clear_ligated_and_multiplied (hb_glyph_info_t *info)
+{
+  info->glyph_props() &= ~(HB_OT_LAYOUT_GLYPH_PROPS_LIGATED |
+			   HB_OT_LAYOUT_GLYPH_PROPS_MULTIPLIED);
+}
+
+
 /* Allocation / deallocation. */
 
-inline void
+static inline void
 _hb_buffer_allocate_unicode_vars (hb_buffer_t *buffer)
 {
   HB_BUFFER_ALLOCATE_VAR (buffer, unicode_props0);
   HB_BUFFER_ALLOCATE_VAR (buffer, unicode_props1);
 }
 
-inline void
+static inline void
 _hb_buffer_deallocate_unicode_vars (hb_buffer_t *buffer)
 {
   HB_BUFFER_DEALLOCATE_VAR (buffer, unicode_props0);
   HB_BUFFER_DEALLOCATE_VAR (buffer, unicode_props1);
 }
 
-inline void
+static inline void
 _hb_buffer_allocate_gsubgpos_vars (hb_buffer_t *buffer)
 {
   HB_BUFFER_ALLOCATE_VAR (buffer, glyph_props);
@@ -405,7 +427,7 @@ _hb_buffer_allocate_gsubgpos_vars (hb_buffer_t *buffer)
   HB_BUFFER_ALLOCATE_VAR (buffer, syllable);
 }
 
-inline void
+static inline void
 _hb_buffer_deallocate_gsubgpos_vars (hb_buffer_t *buffer)
 {
   HB_BUFFER_DEALLOCATE_VAR (buffer, syllable);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.cc
index 183726e63c..661d90ea0d 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.cc
@@ -327,9 +327,28 @@ hb_ot_layout_language_get_required_feature_index (hb_face_t    *face,
 						  unsigned int  language_index,
 						  unsigned int *feature_index)
 {
-  const OT::LangSys &l = get_gsubgpos_table (face, table_tag).get_script (script_index).get_lang_sys (language_index);
+  return hb_ot_layout_language_get_required_feature (face,
+						     table_tag,
+						     script_index,
+						     language_index,
+						     feature_index,
+						     NULL);
+}
+
+hb_bool_t
+hb_ot_layout_language_get_required_feature (hb_face_t    *face,
+					    hb_tag_t      table_tag,
+					    unsigned int  script_index,
+					    unsigned int  language_index,
+					    unsigned int *feature_index,
+					    hb_tag_t     *feature_tag)
+{
+  const OT::GSUBGPOS &g = get_gsubgpos_table (face, table_tag);
+  const OT::LangSys &l = g.get_script (script_index).get_lang_sys (language_index);
 
-  if (feature_index) *feature_index = l.get_required_feature_index ();
+  unsigned int index = l.get_required_feature_index ();
+  if (feature_index) *feature_index = index;
+  if (feature_tag) *feature_tag = g.get_feature_tag (index);
 
   return l.has_required_feature ();
 }
@@ -468,11 +487,12 @@ _hb_ot_layout_collect_lookups_features (hb_face_t      *face,
   if (!features)
   {
     unsigned int required_feature_index;
-    if (hb_ot_layout_language_get_required_feature_index (face,
-							  table_tag,
-							  script_index,
-							  language_index,
-							  &required_feature_index))
+    if (hb_ot_layout_language_get_required_feature (face,
+						    table_tag,
+						    script_index,
+						    language_index,
+						    &required_feature_index,
+						    NULL))
       _hb_ot_layout_collect_lookups_lookups (face,
 					     table_tag,
 					     required_feature_index,
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.h b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.h
index d90eff374d..949678ac42 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-layout.h
@@ -92,9 +92,9 @@ hb_ot_layout_get_ligature_carets (hb_font_t      *font,
  * GSUB/GPOS feature query and enumeration interface
  */
 
-#define HB_OT_LAYOUT_NO_SCRIPT_INDEX		((unsigned int) 0xFFFF)
-#define HB_OT_LAYOUT_NO_FEATURE_INDEX		((unsigned int) 0xFFFF)
-#define HB_OT_LAYOUT_DEFAULT_LANGUAGE_INDEX	((unsigned int) 0xFFFF)
+#define HB_OT_LAYOUT_NO_SCRIPT_INDEX		0xFFFFu
+#define HB_OT_LAYOUT_NO_FEATURE_INDEX		0xFFFFu
+#define HB_OT_LAYOUT_DEFAULT_LANGUAGE_INDEX	0xFFFFu
 
 unsigned int
 hb_ot_layout_table_get_script_tags (hb_face_t    *face,
@@ -146,6 +146,14 @@ hb_ot_layout_language_get_required_feature_index (hb_face_t    *face,
 						  unsigned int  language_index,
 						  unsigned int *feature_index);
 
+hb_bool_t
+hb_ot_layout_language_get_required_feature (hb_face_t    *face,
+					    hb_tag_t      table_tag,
+					    unsigned int  script_index,
+					    unsigned int  language_index,
+					    unsigned int *feature_index,
+					    hb_tag_t     *feature_tag);
+
 unsigned int
 hb_ot_layout_language_get_feature_indexes (hb_face_t    *face,
 					   hb_tag_t      table_tag,
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-map-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-map-private.hh
index 0e718a6f1f..86b7e9fafe 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-map-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-map-private.hh
@@ -153,26 +153,26 @@ struct hb_ot_map_t
 };
 
 enum hb_ot_map_feature_flags_t {
-  F_NONE		= 0x0000,
-  F_GLOBAL		= 0x0001,
-  F_HAS_FALLBACK	= 0x0002,
-  F_MANUAL_ZWJ		= 0x0004
+  F_NONE		= 0x0000u,
+  F_GLOBAL		= 0x0001u,
+  F_HAS_FALLBACK	= 0x0002u,
+  F_MANUAL_ZWJ		= 0x0004u
 };
 /* Macro version for where const is desired. */
 #define F_COMBINE(l,r) (hb_ot_map_feature_flags_t ((unsigned int) (l) | (unsigned int) (r)))
-inline hb_ot_map_feature_flags_t
+static inline hb_ot_map_feature_flags_t
 operator | (hb_ot_map_feature_flags_t l, hb_ot_map_feature_flags_t r)
 { return hb_ot_map_feature_flags_t ((unsigned int) l | (unsigned int) r); }
-inline hb_ot_map_feature_flags_t
+static inline hb_ot_map_feature_flags_t
 operator & (hb_ot_map_feature_flags_t l, hb_ot_map_feature_flags_t r)
 { return hb_ot_map_feature_flags_t ((unsigned int) l & (unsigned int) r); }
-inline hb_ot_map_feature_flags_t
+static inline hb_ot_map_feature_flags_t
 operator ~ (hb_ot_map_feature_flags_t r)
 { return hb_ot_map_feature_flags_t (~(unsigned int) r); }
-inline hb_ot_map_feature_flags_t&
+static inline hb_ot_map_feature_flags_t&
 operator |= (hb_ot_map_feature_flags_t &l, hb_ot_map_feature_flags_t r)
 { l = l | r; return l; }
-inline hb_ot_map_feature_flags_t&
+static inline hb_ot_map_feature_flags_t&
 operator &= (hb_ot_map_feature_flags_t& l, hb_ot_map_feature_flags_t r)
 { l = l & r; return l; }
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-map.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-map.cc
index 559193c1ba..4985eb22b2 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-map.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-map.cc
@@ -99,6 +99,7 @@ void hb_ot_map_builder_t::add_feature (hb_tag_t tag, unsigned int value,
 {
   feature_info_t *info = feature_infos.push();
   if (unlikely (!info)) return;
+  if (unlikely (!tag)) return;
   info->tag = tag;
   info->seq = feature_infos.len;
   info->max_value = value;
@@ -131,9 +132,25 @@ hb_ot_map_builder_t::compile (hb_ot_map_t &m)
 {
   m.global_mask = 1;
 
-  for (unsigned int table_index = 0; table_index < 2; table_index++) {
+  unsigned int required_feature_index[2];
+  hb_tag_t required_feature_tag[2];
+  /* We default to applying required feature in stage 0.  If the required
+   * feature has a tag that is known to the shaper, we apply required feature
+   * in the stage for that tag.
+   */
+  unsigned int required_feature_stage[2] = {0, 0};
+
+  for (unsigned int table_index = 0; table_index < 2; table_index++)
+  {
     m.chosen_script[table_index] = chosen_script[table_index];
     m.found_script[table_index] = found_script[table_index];
+
+    hb_ot_layout_language_get_required_feature (face,
+						table_tags[table_index],
+						script_index[table_index],
+						language_index[table_index],
+						&required_feature_index[table_index],
+						&required_feature_tag[table_index]);
   }
 
   if (!feature_infos.len)
@@ -141,7 +158,7 @@ hb_ot_map_builder_t::compile (hb_ot_map_t &m)
 
   /* Sort features and merge duplicates */
   {
-    feature_infos.sort ();
+    feature_infos.qsort ();
     unsigned int j = 0;
     for (unsigned int i = 1; i < feature_infos.len; i++)
       if (feature_infos[i].tag != feature_infos[j].tag)
@@ -166,7 +183,8 @@ hb_ot_map_builder_t::compile (hb_ot_map_t &m)
 
   /* Allocate bits now */
   unsigned int next_bit = 1;
-  for (unsigned int i = 0; i < feature_infos.len; i++) {
+  for (unsigned int i = 0; i < feature_infos.len; i++)
+  {
     const feature_info_t *info = &feature_infos[i];
 
     unsigned int bits_needed;
@@ -184,12 +202,20 @@ hb_ot_map_builder_t::compile (hb_ot_map_t &m)
     hb_bool_t found = false;
     unsigned int feature_index[2];
     for (unsigned int table_index = 0; table_index < 2; table_index++)
+    {
+      if (required_feature_tag[table_index] == info->tag)
+      {
+	required_feature_stage[table_index] = info->stage[table_index];
+	found = true;
+	continue;
+      }
       found |= hb_ot_layout_language_find_feature (face,
 						   table_tags[table_index],
 						   script_index[table_index],
 						   language_index[table_index],
 						   info->tag,
 						   &feature_index[table_index]);
+    }
     if (!found && !(info->flags & F_HAS_FALLBACK))
       continue;
 
@@ -224,23 +250,21 @@ hb_ot_map_builder_t::compile (hb_ot_map_t &m)
   add_gsub_pause (NULL);
   add_gpos_pause (NULL);
 
-  for (unsigned int table_index = 0; table_index < 2; table_index++) {
-    hb_tag_t table_tag = table_tags[table_index];
-
+  for (unsigned int table_index = 0; table_index < 2; table_index++)
+  {
     /* Collect lookup indices for features */
 
-    unsigned int required_feature_index;
-    if (hb_ot_layout_language_get_required_feature_index (face,
-							  table_tag,
-							  script_index[table_index],
-							  language_index[table_index],
-							  &required_feature_index))
-      m.add_lookups (face, table_index, required_feature_index, 1, true);
-
     unsigned int stage_index = 0;
     unsigned int last_num_lookups = 0;
     for (unsigned stage = 0; stage < current_stage[table_index]; stage++)
     {
+      if (required_feature_index[table_index] != HB_OT_LAYOUT_NO_FEATURE_INDEX &&
+	  required_feature_stage[table_index] == stage)
+	m.add_lookups (face, table_index,
+		       required_feature_index[table_index],
+		       1 /* mask */,
+		       true /* auto_zwj */);
+
       for (unsigned i = 0; i < m.features.len; i++)
         if (m.features[i].stage[table_index] == stage)
 	  m.add_lookups (face, table_index,
@@ -251,7 +275,7 @@ hb_ot_map_builder_t::compile (hb_ot_map_t &m)
       /* Sort lookups and merge duplicates */
       if (last_num_lookups < m.lookups[table_index].len)
       {
-	m.lookups[table_index].sort (last_num_lookups, m.lookups[table_index].len);
+	m.lookups[table_index].qsort (last_num_lookups, m.lookups[table_index].len);
 
 	unsigned int j = last_num_lookups;
 	for (unsigned int i = j + 1; i < m.lookups[table_index].len; i++)
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-maxp-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-maxp-table.hh
index e6d255579c..b1f832852d 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-maxp-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-maxp-table.hh
@@ -50,13 +50,13 @@ struct maxp
   inline bool sanitize (hb_sanitize_context_t *c) {
     TRACE_SANITIZE (this);
     return TRACE_RETURN (c->check_struct (this) &&
-			 likely (version.major == 1 || (version.major == 0 && version.minor == 0x5000)));
+			 likely (version.major == 1 || (version.major == 0 && version.minor == 0x5000u)));
   }
 
   /* We only implement version 0.5 as none of the extra fields in version 1.0 are useful. */
   protected:
   FixedVersion	version;		/* Version of the maxp table (0.5 or 1.0),
-					 * 0x00005000 or 0x00010000. */
+					 * 0x00005000u or 0x00010000u. */
   USHORT	numGlyphs;		/* The number of glyphs in the font. */
   public:
   DEFINE_SIZE_STATIC (6);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-name-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-name-table.hh
index 07dc0565ca..31d9fac7e2 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-name-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-name-table.hh
@@ -121,7 +121,7 @@ struct name
   /* We only implement format 0 for now. */
   USHORT	format;			/* Format selector (=0/1). */
   USHORT	count;			/* Number of name records. */
-  Offset	stringOffset;		/* Offset to start of string storage (from start of table). */
+  Offset<>	stringOffset;		/* Offset to start of string storage (from start of table). */
   NameRecord	nameRecord[VAR];	/* The name records where count is the number of records. */
   public:
   DEFINE_SIZE_ARRAY (6, nameRecord);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-fallback.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-fallback.hh
index 6b2b87e3f2..2d8488e151 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-fallback.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-fallback.hh
@@ -71,7 +71,7 @@ arabic_fallback_synthesize_lookup_single (const hb_ot_shape_plan_t *plan HB_UNUS
 	!hb_font_get_glyph (font, u, 0, &u_glyph) ||
 	!hb_font_get_glyph (font, s, 0, &s_glyph) ||
 	u_glyph == s_glyph ||
-	u_glyph > 0xFFFF || s_glyph > 0xFFFF)
+	u_glyph > 0xFFFFu || s_glyph > 0xFFFFu)
       continue;
 
     glyphs[num_glyphs].set (u_glyph);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-table.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-table.hh
index 730a275bf0..d41d6ce598 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-table.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic-table.hh
@@ -2,12 +2,14 @@
 /*
  * The following table is generated by running:
  *
- *   ./gen-arabic-table.py ArabicShaping.txt UnicodeData.txt
+ *   ./gen-arabic-table.py ArabicShaping.txt UnicodeData.txt Blocks.txt
  *
  * on files with these headers:
  *
- * # ArabicShaping-6.2.0.txt
- * # Date: 2012-05-15, 21:05:00 GMT [KW]
+ * # ArabicShaping-7.0.0.txt
+ * # Date: 2014-02-14, 21:00:00 GMT [RP, KW, LI]
+ * # Blocks-7.0.0.txt
+ * # Date: 2014-04-03, 23:23:00 GMT [RP, KW]
  * UnicodeData.txt does not have a header.
  */
 
@@ -15,903 +17,342 @@
 #define HB_OT_SHAPE_COMPLEX_ARABIC_TABLE_HH
 
 
+#define X	JOINING_TYPE_X
+#define R	JOINING_TYPE_R
+#define U	JOINING_TYPE_U
+#define A	JOINING_GROUP_ALAPH
+#define DR	JOINING_GROUP_DALATH_RISH
+#define L	JOINING_TYPE_L
+#define C	JOINING_TYPE_C
+#define D	JOINING_TYPE_D
+
 static const uint8_t joining_table[] =
 {
 
-  /* Arabic Characters */
-
-  JOINING_TYPE_U, /* 0600; ARABIC NUMBER SIGN; U; No_Joining_Group */
-  JOINING_TYPE_U, /* 0601; ARABIC SIGN SANAH; U; No_Joining_Group */
-  JOINING_TYPE_U, /* 0602; ARABIC FOOTNOTE MARKER; U; No_Joining_Group */
-  JOINING_TYPE_U, /* 0603; ARABIC SIGN SAFHA; U; No_Joining_Group */
-  JOINING_TYPE_U, /* 0604; ARABIC SIGN SAMVAT; U; No_Joining_Group */
-  JOINING_TYPE_X, /* 0605 */
-  JOINING_TYPE_X, /* 0606 */
-  JOINING_TYPE_X, /* 0607 */
-  JOINING_TYPE_U, /* 0608; ARABIC RAY; U; No_Joining_Group */
-  JOINING_TYPE_X, /* 0609 */
-  JOINING_TYPE_X, /* 060A */
-  JOINING_TYPE_U, /* 060B; AFGHANI SIGN; U; No_Joining_Group */
-  JOINING_TYPE_X, /* 060C */
-  JOINING_TYPE_X, /* 060D */
-  JOINING_TYPE_X, /* 060E */
-  JOINING_TYPE_X, /* 060F */
-  JOINING_TYPE_X, /* 0610 */
-  JOINING_TYPE_X, /* 0611 */
-  JOINING_TYPE_X, /* 0612 */
-  JOINING_TYPE_X, /* 0613 */
-  JOINING_TYPE_X, /* 0614 */
-  JOINING_TYPE_X, /* 0615 */
-  JOINING_TYPE_X, /* 0616 */
-  JOINING_TYPE_X, /* 0617 */
-  JOINING_TYPE_X, /* 0618 */
-  JOINING_TYPE_X, /* 0619 */
-  JOINING_TYPE_X, /* 061A */
-  JOINING_TYPE_X, /* 061B */
-  JOINING_TYPE_X, /* 061C */
-  JOINING_TYPE_X, /* 061D */
-  JOINING_TYPE_X, /* 061E */
-  JOINING_TYPE_X, /* 061F */
-  JOINING_TYPE_D, /* 0620; DOTLESS YEH WITH SEPARATE RING BELOW; D; YEH */
-  JOINING_TYPE_U, /* 0621; HAMZA; U; No_Joining_Group */
-  JOINING_TYPE_R, /* 0622; ALEF WITH MADDA ABOVE; R; ALEF */
-  JOINING_TYPE_R, /* 0623; ALEF WITH HAMZA ABOVE; R; ALEF */
-  JOINING_TYPE_R, /* 0624; WAW WITH HAMZA ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 0625; ALEF WITH HAMZA BELOW; R; ALEF */
-  JOINING_TYPE_D, /* 0626; DOTLESS YEH WITH HAMZA ABOVE; D; YEH */
-  JOINING_TYPE_R, /* 0627; ALEF; R; ALEF */
-  JOINING_TYPE_D, /* 0628; BEH; D; BEH */
-  JOINING_TYPE_R, /* 0629; TEH MARBUTA; R; TEH MARBUTA */
-  JOINING_TYPE_D, /* 062A; DOTLESS BEH WITH 2 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 062B; DOTLESS BEH WITH 3 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 062C; HAH WITH DOT BELOW; D; HAH */
-  JOINING_TYPE_D, /* 062D; HAH; D; HAH */
-  JOINING_TYPE_D, /* 062E; HAH WITH DOT ABOVE; D; HAH */
-  JOINING_TYPE_R, /* 062F; DAL; R; DAL */
-  JOINING_TYPE_R, /* 0630; DAL WITH DOT ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 0631; REH; R; REH */
-  JOINING_TYPE_R, /* 0632; REH WITH DOT ABOVE; R; REH */
-  JOINING_TYPE_D, /* 0633; SEEN; D; SEEN */
-  JOINING_TYPE_D, /* 0634; SEEN WITH 3 DOTS ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 0635; SAD; D; SAD */
-  JOINING_TYPE_D, /* 0636; SAD WITH DOT ABOVE; D; SAD */
-  JOINING_TYPE_D, /* 0637; TAH; D; TAH */
-  JOINING_TYPE_D, /* 0638; TAH WITH DOT ABOVE; D; TAH */
-  JOINING_TYPE_D, /* 0639; AIN; D; AIN */
-  JOINING_TYPE_D, /* 063A; AIN WITH DOT ABOVE; D; AIN */
-  JOINING_TYPE_D, /* 063B; KEHEH WITH 2 DOTS ABOVE; D; GAF */
-  JOINING_TYPE_D, /* 063C; KEHEH WITH 3 DOTS BELOW; D; GAF */
-  JOINING_TYPE_D, /* 063D; FARSI YEH WITH INVERTED V ABOVE; D; FARSI YEH */
-  JOINING_TYPE_D, /* 063E; FARSI YEH WITH 2 DOTS ABOVE; D; FARSI YEH */
-  JOINING_TYPE_D, /* 063F; FARSI YEH WITH 3 DOTS ABOVE; D; FARSI YEH */
-  JOINING_TYPE_C, /* 0640; TATWEEL; C; No_Joining_Group */
-  JOINING_TYPE_D, /* 0641; FEH; D; FEH */
-  JOINING_TYPE_D, /* 0642; QAF; D; QAF */
-  JOINING_TYPE_D, /* 0643; KAF; D; KAF */
-  JOINING_TYPE_D, /* 0644; LAM; D; LAM */
-  JOINING_TYPE_D, /* 0645; MEEM; D; MEEM */
-  JOINING_TYPE_D, /* 0646; NOON; D; NOON */
-  JOINING_TYPE_D, /* 0647; HEH; D; HEH */
-  JOINING_TYPE_R, /* 0648; WAW; R; WAW */
-  JOINING_TYPE_D, /* 0649; DOTLESS YEH; D; YEH */
-  JOINING_TYPE_D, /* 064A; YEH; D; YEH */
-  JOINING_TYPE_X, /* 064B */
-  JOINING_TYPE_X, /* 064C */
-  JOINING_TYPE_X, /* 064D */
-  JOINING_TYPE_X, /* 064E */
-  JOINING_TYPE_X, /* 064F */
-  JOINING_TYPE_X, /* 0650 */
-  JOINING_TYPE_X, /* 0651 */
-  JOINING_TYPE_X, /* 0652 */
-  JOINING_TYPE_X, /* 0653 */
-  JOINING_TYPE_X, /* 0654 */
-  JOINING_TYPE_X, /* 0655 */
-  JOINING_TYPE_X, /* 0656 */
-  JOINING_TYPE_X, /* 0657 */
-  JOINING_TYPE_X, /* 0658 */
-  JOINING_TYPE_X, /* 0659 */
-  JOINING_TYPE_X, /* 065A */
-  JOINING_TYPE_X, /* 065B */
-  JOINING_TYPE_X, /* 065C */
-  JOINING_TYPE_X, /* 065D */
-  JOINING_TYPE_X, /* 065E */
-  JOINING_TYPE_X, /* 065F */
-  JOINING_TYPE_X, /* 0660 */
-  JOINING_TYPE_X, /* 0661 */
-  JOINING_TYPE_X, /* 0662 */
-  JOINING_TYPE_X, /* 0663 */
-  JOINING_TYPE_X, /* 0664 */
-  JOINING_TYPE_X, /* 0665 */
-  JOINING_TYPE_X, /* 0666 */
-  JOINING_TYPE_X, /* 0667 */
-  JOINING_TYPE_X, /* 0668 */
-  JOINING_TYPE_X, /* 0669 */
-  JOINING_TYPE_X, /* 066A */
-  JOINING_TYPE_X, /* 066B */
-  JOINING_TYPE_X, /* 066C */
-  JOINING_TYPE_X, /* 066D */
-  JOINING_TYPE_D, /* 066E; DOTLESS BEH; D; BEH */
-  JOINING_TYPE_D, /* 066F; DOTLESS QAF; D; QAF */
-  JOINING_TYPE_X, /* 0670 */
-  JOINING_TYPE_R, /* 0671; ALEF WITH WASLA ABOVE; R; ALEF */
-  JOINING_TYPE_R, /* 0672; ALEF WITH WAVY HAMZA ABOVE; R; ALEF */
-  JOINING_TYPE_R, /* 0673; ALEF WITH WAVY HAMZA BELOW; R; ALEF */
-  JOINING_TYPE_U, /* 0674; HIGH HAMZA; U; No_Joining_Group */
-  JOINING_TYPE_R, /* 0675; HIGH HAMZA ALEF; R; ALEF */
-  JOINING_TYPE_R, /* 0676; HIGH HAMZA WAW; R; WAW */
-  JOINING_TYPE_R, /* 0677; HIGH HAMZA WAW WITH DAMMA ABOVE; R; WAW */
-  JOINING_TYPE_D, /* 0678; HIGH HAMZA DOTLESS YEH; D; YEH */
-  JOINING_TYPE_D, /* 0679; DOTLESS BEH WITH TAH ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 067A; DOTLESS BEH WITH VERTICAL 2 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 067B; DOTLESS BEH WITH VERTICAL 2 DOTS BELOW; D; BEH */
-  JOINING_TYPE_D, /* 067C; DOTLESS BEH WITH ATTACHED RING BELOW AND 2 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 067D; DOTLESS BEH WITH INVERTED 3 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 067E; DOTLESS BEH WITH 3 DOTS BELOW; D; BEH */
-  JOINING_TYPE_D, /* 067F; DOTLESS BEH WITH 4 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 0680; DOTLESS BEH WITH 4 DOTS BELOW; D; BEH */
-  JOINING_TYPE_D, /* 0681; HAH WITH HAMZA ABOVE; D; HAH */
-  JOINING_TYPE_D, /* 0682; HAH WITH VERTICAL 2 DOTS ABOVE; D; HAH */
-  JOINING_TYPE_D, /* 0683; HAH WITH 2 DOTS BELOW; D; HAH */
-  JOINING_TYPE_D, /* 0684; HAH WITH VERTICAL 2 DOTS BELOW; D; HAH */
-  JOINING_TYPE_D, /* 0685; HAH WITH 3 DOTS ABOVE; D; HAH */
-  JOINING_TYPE_D, /* 0686; HAH WITH 3 DOTS BELOW; D; HAH */
-  JOINING_TYPE_D, /* 0687; HAH WITH 4 DOTS BELOW; D; HAH */
-  JOINING_TYPE_R, /* 0688; DAL WITH TAH ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 0689; DAL WITH ATTACHED RING BELOW; R; DAL */
-  JOINING_TYPE_R, /* 068A; DAL WITH DOT BELOW; R; DAL */
-  JOINING_TYPE_R, /* 068B; DAL WITH DOT BELOW AND TAH ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 068C; DAL WITH 2 DOTS ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 068D; DAL WITH 2 DOTS BELOW; R; DAL */
-  JOINING_TYPE_R, /* 068E; DAL WITH 3 DOTS ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 068F; DAL WITH INVERTED 3 DOTS ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 0690; DAL WITH 4 DOTS ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 0691; REH WITH TAH ABOVE; R; REH */
-  JOINING_TYPE_R, /* 0692; REH WITH V ABOVE; R; REH */
-  JOINING_TYPE_R, /* 0693; REH WITH ATTACHED RING BELOW; R; REH */
-  JOINING_TYPE_R, /* 0694; REH WITH DOT BELOW; R; REH */
-  JOINING_TYPE_R, /* 0695; REH WITH V BELOW; R; REH */
-  JOINING_TYPE_R, /* 0696; REH WITH DOT BELOW AND DOT WITHIN; R; REH */
-  JOINING_TYPE_R, /* 0697; REH WITH 2 DOTS ABOVE; R; REH */
-  JOINING_TYPE_R, /* 0698; REH WITH 3 DOTS ABOVE; R; REH */
-  JOINING_TYPE_R, /* 0699; REH WITH 4 DOTS ABOVE; R; REH */
-  JOINING_TYPE_D, /* 069A; SEEN WITH DOT BELOW AND DOT ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 069B; SEEN WITH 3 DOTS BELOW; D; SEEN */
-  JOINING_TYPE_D, /* 069C; SEEN WITH 3 DOTS BELOW AND 3 DOTS ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 069D; SAD WITH 2 DOTS BELOW; D; SAD */
-  JOINING_TYPE_D, /* 069E; SAD WITH 3 DOTS ABOVE; D; SAD */
-  JOINING_TYPE_D, /* 069F; TAH WITH 3 DOTS ABOVE; D; TAH */
-  JOINING_TYPE_D, /* 06A0; AIN WITH 3 DOTS ABOVE; D; AIN */
-  JOINING_TYPE_D, /* 06A1; DOTLESS FEH; D; FEH */
-  JOINING_TYPE_D, /* 06A2; DOTLESS FEH WITH DOT BELOW; D; FEH */
-  JOINING_TYPE_D, /* 06A3; FEH WITH DOT BELOW; D; FEH */
-  JOINING_TYPE_D, /* 06A4; DOTLESS FEH WITH 3 DOTS ABOVE; D; FEH */
-  JOINING_TYPE_D, /* 06A5; DOTLESS FEH WITH 3 DOTS BELOW; D; FEH */
-  JOINING_TYPE_D, /* 06A6; DOTLESS FEH WITH 4 DOTS ABOVE; D; FEH */
-  JOINING_TYPE_D, /* 06A7; DOTLESS QAF WITH DOT ABOVE; D; QAF */
-  JOINING_TYPE_D, /* 06A8; DOTLESS QAF WITH 3 DOTS ABOVE; D; QAF */
-  JOINING_TYPE_D, /* 06A9; KEHEH; D; GAF */
-  JOINING_TYPE_D, /* 06AA; SWASH KAF; D; SWASH KAF */
-  JOINING_TYPE_D, /* 06AB; KEHEH WITH ATTACHED RING BELOW; D; GAF */
-  JOINING_TYPE_D, /* 06AC; KAF WITH DOT ABOVE; D; KAF */
-  JOINING_TYPE_D, /* 06AD; KAF WITH 3 DOTS ABOVE; D; KAF */
-  JOINING_TYPE_D, /* 06AE; KAF WITH 3 DOTS BELOW; D; KAF */
-  JOINING_TYPE_D, /* 06AF; GAF; D; GAF */
-  JOINING_TYPE_D, /* 06B0; GAF WITH ATTACHED RING BELOW; D; GAF */
-  JOINING_TYPE_D, /* 06B1; GAF WITH 2 DOTS ABOVE; D; GAF */
-  JOINING_TYPE_D, /* 06B2; GAF WITH 2 DOTS BELOW; D; GAF */
-  JOINING_TYPE_D, /* 06B3; GAF WITH VERTICAL 2 DOTS BELOW; D; GAF */
-  JOINING_TYPE_D, /* 06B4; GAF WITH 3 DOTS ABOVE; D; GAF */
-  JOINING_TYPE_D, /* 06B5; LAM WITH V ABOVE; D; LAM */
-  JOINING_TYPE_D, /* 06B6; LAM WITH DOT ABOVE; D; LAM */
-  JOINING_TYPE_D, /* 06B7; LAM WITH 3 DOTS ABOVE; D; LAM */
-  JOINING_TYPE_D, /* 06B8; LAM WITH 3 DOTS BELOW; D; LAM */
-  JOINING_TYPE_D, /* 06B9; NOON WITH DOT BELOW; D; NOON */
-  JOINING_TYPE_D, /* 06BA; DOTLESS NOON; D; NOON */
-  JOINING_TYPE_D, /* 06BB; DOTLESS NOON WITH TAH ABOVE; D; NOON */
-  JOINING_TYPE_D, /* 06BC; NOON WITH ATTACHED RING BELOW; D; NOON */
-  JOINING_TYPE_D, /* 06BD; NYA; D; NYA */
-  JOINING_TYPE_D, /* 06BE; KNOTTED HEH; D; KNOTTED HEH */
-  JOINING_TYPE_D, /* 06BF; HAH WITH 3 DOTS BELOW AND DOT ABOVE; D; HAH */
-  JOINING_TYPE_R, /* 06C0; DOTLESS TEH MARBUTA WITH HAMZA ABOVE; R; TEH MARBUTA */
-  JOINING_TYPE_D, /* 06C1; HEH GOAL; D; HEH GOAL */
-  JOINING_TYPE_D, /* 06C2; HEH GOAL WITH HAMZA ABOVE; D; HEH GOAL */
-  JOINING_TYPE_R, /* 06C3; TEH MARBUTA GOAL; R; TEH MARBUTA GOAL */
-  JOINING_TYPE_R, /* 06C4; WAW WITH ATTACHED RING WITHIN; R; WAW */
-  JOINING_TYPE_R, /* 06C5; WAW WITH BAR; R; WAW */
-  JOINING_TYPE_R, /* 06C6; WAW WITH V ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 06C7; WAW WITH DAMMA ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 06C8; WAW WITH ALEF ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 06C9; WAW WITH INVERTED V ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 06CA; WAW WITH 2 DOTS ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 06CB; WAW WITH 3 DOTS ABOVE; R; WAW */
-  JOINING_TYPE_D, /* 06CC; FARSI YEH; D; FARSI YEH */
-  JOINING_TYPE_R, /* 06CD; YEH WITH TAIL; R; YEH WITH TAIL */
-  JOINING_TYPE_D, /* 06CE; FARSI YEH WITH V ABOVE; D; FARSI YEH */
-  JOINING_TYPE_R, /* 06CF; WAW WITH DOT ABOVE; R; WAW */
-  JOINING_TYPE_D, /* 06D0; DOTLESS YEH WITH VERTICAL 2 DOTS BELOW; D; YEH */
-  JOINING_TYPE_D, /* 06D1; DOTLESS YEH WITH 3 DOTS BELOW; D; YEH */
-  JOINING_TYPE_R, /* 06D2; YEH BARREE; R; YEH BARREE */
-  JOINING_TYPE_R, /* 06D3; YEH BARREE WITH HAMZA ABOVE; R; YEH BARREE */
-  JOINING_TYPE_X, /* 06D4 */
-  JOINING_TYPE_R, /* 06D5; DOTLESS TEH MARBUTA; R; TEH MARBUTA */
-  JOINING_TYPE_X, /* 06D6 */
-  JOINING_TYPE_X, /* 06D7 */
-  JOINING_TYPE_X, /* 06D8 */
-  JOINING_TYPE_X, /* 06D9 */
-  JOINING_TYPE_X, /* 06DA */
-  JOINING_TYPE_X, /* 06DB */
-  JOINING_TYPE_X, /* 06DC */
-  JOINING_TYPE_U, /* 06DD; ARABIC END OF AYAH; U; No_Joining_Group */
-  JOINING_TYPE_X, /* 06DE */
-  JOINING_TYPE_X, /* 06DF */
-  JOINING_TYPE_X, /* 06E0 */
-  JOINING_TYPE_X, /* 06E1 */
-  JOINING_TYPE_X, /* 06E2 */
-  JOINING_TYPE_X, /* 06E3 */
-  JOINING_TYPE_X, /* 06E4 */
-  JOINING_TYPE_X, /* 06E5 */
-  JOINING_TYPE_X, /* 06E6 */
-  JOINING_TYPE_X, /* 06E7 */
-  JOINING_TYPE_X, /* 06E8 */
-  JOINING_TYPE_X, /* 06E9 */
-  JOINING_TYPE_X, /* 06EA */
-  JOINING_TYPE_X, /* 06EB */
-  JOINING_TYPE_X, /* 06EC */
-  JOINING_TYPE_X, /* 06ED */
-  JOINING_TYPE_R, /* 06EE; DAL WITH INVERTED V ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 06EF; REH WITH INVERTED V ABOVE; R; REH */
-  JOINING_TYPE_X, /* 06F0 */
-  JOINING_TYPE_X, /* 06F1 */
-  JOINING_TYPE_X, /* 06F2 */
-  JOINING_TYPE_X, /* 06F3 */
-  JOINING_TYPE_X, /* 06F4 */
-  JOINING_TYPE_X, /* 06F5 */
-  JOINING_TYPE_X, /* 06F6 */
-  JOINING_TYPE_X, /* 06F7 */
-  JOINING_TYPE_X, /* 06F8 */
-  JOINING_TYPE_X, /* 06F9 */
-  JOINING_TYPE_D, /* 06FA; SEEN WITH DOT BELOW AND 3 DOTS ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 06FB; SAD WITH DOT BELOW AND DOT ABOVE; D; SAD */
-  JOINING_TYPE_D, /* 06FC; AIN WITH DOT BELOW AND DOT ABOVE; D; AIN */
-  JOINING_TYPE_X, /* 06FD */
-  JOINING_TYPE_X, /* 06FE */
-  JOINING_TYPE_D, /* 06FF; KNOTTED HEH WITH INVERTED V ABOVE; D; KNOTTED HEH */
-
-  /* Syriac Characters */
-
-  JOINING_TYPE_X, /* 0700 */
-  JOINING_TYPE_X, /* 0701 */
-  JOINING_TYPE_X, /* 0702 */
-  JOINING_TYPE_X, /* 0703 */
-  JOINING_TYPE_X, /* 0704 */
-  JOINING_TYPE_X, /* 0705 */
-  JOINING_TYPE_X, /* 0706 */
-  JOINING_TYPE_X, /* 0707 */
-  JOINING_TYPE_X, /* 0708 */
-  JOINING_TYPE_X, /* 0709 */
-  JOINING_TYPE_X, /* 070A */
-  JOINING_TYPE_X, /* 070B */
-  JOINING_TYPE_X, /* 070C */
-  JOINING_TYPE_X, /* 070D */
-  JOINING_TYPE_X, /* 070E */
-  JOINING_TYPE_X, /* 070F */
-  JOINING_GROUP_ALAPH, /* 0710; ALAPH; R; ALAPH */
-  JOINING_TYPE_X, /* 0711 */
-  JOINING_TYPE_D, /* 0712; BETH; D; BETH */
-  JOINING_TYPE_D, /* 0713; GAMAL; D; GAMAL */
-  JOINING_TYPE_D, /* 0714; GAMAL GARSHUNI; D; GAMAL */
-  JOINING_GROUP_DALATH_RISH, /* 0715; DALATH; R; DALATH RISH */
-  JOINING_GROUP_DALATH_RISH, /* 0716; DOTLESS DALATH RISH; R; DALATH RISH */
-  JOINING_TYPE_R, /* 0717; HE; R; HE */
-  JOINING_TYPE_R, /* 0718; WAW; R; SYRIAC WAW */
-  JOINING_TYPE_R, /* 0719; ZAIN; R; ZAIN */
-  JOINING_TYPE_D, /* 071A; HETH; D; HETH */
-  JOINING_TYPE_D, /* 071B; TETH; D; TETH */
-  JOINING_TYPE_D, /* 071C; TETH GARSHUNI; D; TETH */
-  JOINING_TYPE_D, /* 071D; YUDH; D; YUDH */
-  JOINING_TYPE_R, /* 071E; YUDH HE; R; YUDH HE */
-  JOINING_TYPE_D, /* 071F; KAPH; D; KAPH */
-  JOINING_TYPE_D, /* 0720; LAMADH; D; LAMADH */
-  JOINING_TYPE_D, /* 0721; MIM; D; MIM */
-  JOINING_TYPE_D, /* 0722; NUN; D; NUN */
-  JOINING_TYPE_D, /* 0723; SEMKATH; D; SEMKATH */
-  JOINING_TYPE_D, /* 0724; FINAL SEMKATH; D; FINAL SEMKATH */
-  JOINING_TYPE_D, /* 0725; E; D; E */
-  JOINING_TYPE_D, /* 0726; PE; D; PE */
-  JOINING_TYPE_D, /* 0727; REVERSED PE; D; REVERSED PE */
-  JOINING_TYPE_R, /* 0728; SADHE; R; SADHE */
-  JOINING_TYPE_D, /* 0729; QAPH; D; QAPH */
-  JOINING_GROUP_DALATH_RISH, /* 072A; RISH; R; DALATH RISH */
-  JOINING_TYPE_D, /* 072B; SHIN; D; SHIN */
-  JOINING_TYPE_R, /* 072C; TAW; R; TAW */
-  JOINING_TYPE_D, /* 072D; PERSIAN BHETH; D; BETH */
-  JOINING_TYPE_D, /* 072E; PERSIAN GHAMAL; D; GAMAL */
-  JOINING_GROUP_DALATH_RISH, /* 072F; PERSIAN DHALATH; R; DALATH RISH */
-  JOINING_TYPE_X, /* 0730 */
-  JOINING_TYPE_X, /* 0731 */
-  JOINING_TYPE_X, /* 0732 */
-  JOINING_TYPE_X, /* 0733 */
-  JOINING_TYPE_X, /* 0734 */
-  JOINING_TYPE_X, /* 0735 */
-  JOINING_TYPE_X, /* 0736 */
-  JOINING_TYPE_X, /* 0737 */
-  JOINING_TYPE_X, /* 0738 */
-  JOINING_TYPE_X, /* 0739 */
-  JOINING_TYPE_X, /* 073A */
-  JOINING_TYPE_X, /* 073B */
-  JOINING_TYPE_X, /* 073C */
-  JOINING_TYPE_X, /* 073D */
-  JOINING_TYPE_X, /* 073E */
-  JOINING_TYPE_X, /* 073F */
-  JOINING_TYPE_X, /* 0740 */
-  JOINING_TYPE_X, /* 0741 */
-  JOINING_TYPE_X, /* 0742 */
-  JOINING_TYPE_X, /* 0743 */
-  JOINING_TYPE_X, /* 0744 */
-  JOINING_TYPE_X, /* 0745 */
-  JOINING_TYPE_X, /* 0746 */
-  JOINING_TYPE_X, /* 0747 */
-  JOINING_TYPE_X, /* 0748 */
-  JOINING_TYPE_X, /* 0749 */
-  JOINING_TYPE_X, /* 074A */
-  JOINING_TYPE_X, /* 074B */
-  JOINING_TYPE_X, /* 074C */
-  JOINING_TYPE_R, /* 074D; SOGDIAN ZHAIN; R; ZHAIN */
-  JOINING_TYPE_D, /* 074E; SOGDIAN KHAPH; D; KHAPH */
-  JOINING_TYPE_D, /* 074F; SOGDIAN FE; D; FE */
-
-  /* Arabic Supplement Characters */
-
-  JOINING_TYPE_D, /* 0750; DOTLESS BEH WITH HORIZONTAL 3 DOTS BELOW; D; BEH */
-  JOINING_TYPE_D, /* 0751; BEH WITH 3 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 0752; DOTLESS BEH WITH INVERTED 3 DOTS BELOW; D; BEH */
-  JOINING_TYPE_D, /* 0753; DOTLESS BEH WITH INVERTED 3 DOTS BELOW AND 2 DOTS ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 0754; DOTLESS BEH WITH 2 DOTS BELOW AND DOT ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 0755; DOTLESS BEH WITH INVERTED V BELOW; D; BEH */
-  JOINING_TYPE_D, /* 0756; DOTLESS BEH WITH V ABOVE; D; BEH */
-  JOINING_TYPE_D, /* 0757; HAH WITH 2 DOTS ABOVE; D; HAH */
-  JOINING_TYPE_D, /* 0758; HAH WITH INVERTED 3 DOTS BELOW; D; HAH */
-  JOINING_TYPE_R, /* 0759; DAL WITH VERTICAL 2 DOTS BELOW AND TAH ABOVE; R; DAL */
-  JOINING_TYPE_R, /* 075A; DAL WITH INVERTED V BELOW; R; DAL */
-  JOINING_TYPE_R, /* 075B; REH WITH BAR; R; REH */
-  JOINING_TYPE_D, /* 075C; SEEN WITH 4 DOTS ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 075D; AIN WITH 2 DOTS ABOVE; D; AIN */
-  JOINING_TYPE_D, /* 075E; AIN WITH INVERTED 3 DOTS ABOVE; D; AIN */
-  JOINING_TYPE_D, /* 075F; AIN WITH VERTICAL 2 DOTS ABOVE; D; AIN */
-  JOINING_TYPE_D, /* 0760; DOTLESS FEH WITH 2 DOTS BELOW; D; FEH */
-  JOINING_TYPE_D, /* 0761; DOTLESS FEH WITH INVERTED 3 DOTS BELOW; D; FEH */
-  JOINING_TYPE_D, /* 0762; KEHEH WITH DOT ABOVE; D; GAF */
-  JOINING_TYPE_D, /* 0763; KEHEH WITH 3 DOTS ABOVE; D; GAF */
-  JOINING_TYPE_D, /* 0764; KEHEH WITH INVERTED 3 DOTS BELOW; D; GAF */
-  JOINING_TYPE_D, /* 0765; MEEM WITH DOT ABOVE; D; MEEM */
-  JOINING_TYPE_D, /* 0766; MEEM WITH DOT BELOW; D; MEEM */
-  JOINING_TYPE_D, /* 0767; NOON WITH 2 DOTS BELOW; D; NOON */
-  JOINING_TYPE_D, /* 0768; NOON WITH TAH ABOVE; D; NOON */
-  JOINING_TYPE_D, /* 0769; NOON WITH V ABOVE; D; NOON */
-  JOINING_TYPE_D, /* 076A; LAM WITH BAR; D; LAM */
-  JOINING_TYPE_R, /* 076B; REH WITH VERTICAL 2 DOTS ABOVE; R; REH */
-  JOINING_TYPE_R, /* 076C; REH WITH HAMZA ABOVE; R; REH */
-  JOINING_TYPE_D, /* 076D; SEEN WITH VERTICAL 2 DOTS ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 076E; HAH WITH TAH BELOW; D; HAH */
-  JOINING_TYPE_D, /* 076F; HAH WITH TAH AND 2 DOTS BELOW; D; HAH */
-  JOINING_TYPE_D, /* 0770; SEEN WITH 2 DOTS AND TAH ABOVE; D; SEEN */
-  JOINING_TYPE_R, /* 0771; REH WITH 2 DOTS AND TAH ABOVE; R; REH */
-  JOINING_TYPE_D, /* 0772; HAH WITH TAH ABOVE; D; HAH */
-  JOINING_TYPE_R, /* 0773; ALEF WITH DIGIT TWO ABOVE; R; ALEF */
-  JOINING_TYPE_R, /* 0774; ALEF WITH DIGIT THREE ABOVE; R; ALEF */
-  JOINING_TYPE_D, /* 0775; FARSI YEH WITH DIGIT TWO ABOVE; D; FARSI YEH */
-  JOINING_TYPE_D, /* 0776; FARSI YEH WITH DIGIT THREE ABOVE; D; FARSI YEH */
-  JOINING_TYPE_D, /* 0777; DOTLESS YEH WITH DIGIT FOUR BELOW; D; YEH */
-  JOINING_TYPE_R, /* 0778; WAW WITH DIGIT TWO ABOVE; R; WAW */
-  JOINING_TYPE_R, /* 0779; WAW WITH DIGIT THREE ABOVE; R; WAW */
-  JOINING_TYPE_D, /* 077A; BURUSHASKI YEH BARREE WITH DIGIT TWO ABOVE; D; BURUSHASKI YEH BARREE */
-  JOINING_TYPE_D, /* 077B; BURUSHASKI YEH BARREE WITH DIGIT THREE ABOVE; D; BURUSHASKI YEH BARREE */
-  JOINING_TYPE_D, /* 077C; HAH WITH DIGIT FOUR BELOW; D; HAH */
-  JOINING_TYPE_D, /* 077D; SEEN WITH DIGIT FOUR ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 077E; SEEN WITH INVERTED V ABOVE; D; SEEN */
-  JOINING_TYPE_D, /* 077F; KAF WITH 2 DOTS ABOVE; D; KAF */
-
-  /* N'Ko Characters */
-
-  JOINING_TYPE_X, /* 0780 */
-  JOINING_TYPE_X, /* 0781 */
-  JOINING_TYPE_X, /* 0782 */
-  JOINING_TYPE_X, /* 0783 */
-  JOINING_TYPE_X, /* 0784 */
-  JOINING_TYPE_X, /* 0785 */
-  JOINING_TYPE_X, /* 0786 */
-  JOINING_TYPE_X, /* 0787 */
-  JOINING_TYPE_X, /* 0788 */
-  JOINING_TYPE_X, /* 0789 */
-  JOINING_TYPE_X, /* 078A */
-  JOINING_TYPE_X, /* 078B */
-  JOINING_TYPE_X, /* 078C */
-  JOINING_TYPE_X, /* 078D */
-  JOINING_TYPE_X, /* 078E */
-  JOINING_TYPE_X, /* 078F */
-  JOINING_TYPE_X, /* 0790 */
-  JOINING_TYPE_X, /* 0791 */
-  JOINING_TYPE_X, /* 0792 */
-  JOINING_TYPE_X, /* 0793 */
-  JOINING_TYPE_X, /* 0794 */
-  JOINING_TYPE_X, /* 0795 */
-  JOINING_TYPE_X, /* 0796 */
-  JOINING_TYPE_X, /* 0797 */
-  JOINING_TYPE_X, /* 0798 */
-  JOINING_TYPE_X, /* 0799 */
-  JOINING_TYPE_X, /* 079A */
-  JOINING_TYPE_X, /* 079B */
-  JOINING_TYPE_X, /* 079C */
-  JOINING_TYPE_X, /* 079D */
-  JOINING_TYPE_X, /* 079E */
-  JOINING_TYPE_X, /* 079F */
-  JOINING_TYPE_X, /* 07A0 */
-  JOINING_TYPE_X, /* 07A1 */
-  JOINING_TYPE_X, /* 07A2 */
-  JOINING_TYPE_X, /* 07A3 */
-  JOINING_TYPE_X, /* 07A4 */
-  JOINING_TYPE_X, /* 07A5 */
-  JOINING_TYPE_X, /* 07A6 */
-  JOINING_TYPE_X, /* 07A7 */
-  JOINING_TYPE_X, /* 07A8 */
-  JOINING_TYPE_X, /* 07A9 */
-  JOINING_TYPE_X, /* 07AA */
-  JOINING_TYPE_X, /* 07AB */
-  JOINING_TYPE_X, /* 07AC */
-  JOINING_TYPE_X, /* 07AD */
-  JOINING_TYPE_X, /* 07AE */
-  JOINING_TYPE_X, /* 07AF */
-  JOINING_TYPE_X, /* 07B0 */
-  JOINING_TYPE_X, /* 07B1 */
-  JOINING_TYPE_X, /* 07B2 */
-  JOINING_TYPE_X, /* 07B3 */
-  JOINING_TYPE_X, /* 07B4 */
-  JOINING_TYPE_X, /* 07B5 */
-  JOINING_TYPE_X, /* 07B6 */
-  JOINING_TYPE_X, /* 07B7 */
-  JOINING_TYPE_X, /* 07B8 */
-  JOINING_TYPE_X, /* 07B9 */
-  JOINING_TYPE_X, /* 07BA */
-  JOINING_TYPE_X, /* 07BB */
-  JOINING_TYPE_X, /* 07BC */
-  JOINING_TYPE_X, /* 07BD */
-  JOINING_TYPE_X, /* 07BE */
-  JOINING_TYPE_X, /* 07BF */
-  JOINING_TYPE_X, /* 07C0 */
-  JOINING_TYPE_X, /* 07C1 */
-  JOINING_TYPE_X, /* 07C2 */
-  JOINING_TYPE_X, /* 07C3 */
-  JOINING_TYPE_X, /* 07C4 */
-  JOINING_TYPE_X, /* 07C5 */
-  JOINING_TYPE_X, /* 07C6 */
-  JOINING_TYPE_X, /* 07C7 */
-  JOINING_TYPE_X, /* 07C8 */
-  JOINING_TYPE_X, /* 07C9 */
-  JOINING_TYPE_D, /* 07CA; NKO A; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07CB; NKO EE; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07CC; NKO I; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07CD; NKO E; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07CE; NKO U; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07CF; NKO OO; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D0; NKO O; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D1; NKO DAGBASINNA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D2; NKO N; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D3; NKO BA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D4; NKO PA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D5; NKO TA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D6; NKO JA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D7; NKO CHA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D8; NKO DA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07D9; NKO RA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07DA; NKO RRA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07DB; NKO SA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07DC; NKO GBA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07DD; NKO FA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07DE; NKO KA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07DF; NKO LA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E0; NKO NA WOLOSO; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E1; NKO MA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E2; NKO NYA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E3; NKO NA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E4; NKO HA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E5; NKO WA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E6; NKO YA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E7; NKO NYA WOLOSO; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E8; NKO JONA JA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07E9; NKO JONA CHA; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 07EA; NKO JONA RA; D; No_Joining_Group */
-  JOINING_TYPE_X, /* 07EB */
-  JOINING_TYPE_X, /* 07EC */
-  JOINING_TYPE_X, /* 07ED */
-  JOINING_TYPE_X, /* 07EE */
-  JOINING_TYPE_X, /* 07EF */
-  JOINING_TYPE_X, /* 07F0 */
-  JOINING_TYPE_X, /* 07F1 */
-  JOINING_TYPE_X, /* 07F2 */
-  JOINING_TYPE_X, /* 07F3 */
-  JOINING_TYPE_X, /* 07F4 */
-  JOINING_TYPE_X, /* 07F5 */
-  JOINING_TYPE_X, /* 07F6 */
-  JOINING_TYPE_X, /* 07F7 */
-  JOINING_TYPE_X, /* 07F8 */
-  JOINING_TYPE_X, /* 07F9 */
-  JOINING_TYPE_C, /* 07FA; NKO LAJANYALAN; C; No_Joining_Group */
-
-  /* Mandaic Characters */
-
-  JOINING_TYPE_X, /* 07FB */
-  JOINING_TYPE_X, /* 07FC */
-  JOINING_TYPE_X, /* 07FD */
-  JOINING_TYPE_X, /* 07FE */
-  JOINING_TYPE_X, /* 07FF */
-  JOINING_TYPE_X, /* 0800 */
-  JOINING_TYPE_X, /* 0801 */
-  JOINING_TYPE_X, /* 0802 */
-  JOINING_TYPE_X, /* 0803 */
-  JOINING_TYPE_X, /* 0804 */
-  JOINING_TYPE_X, /* 0805 */
-  JOINING_TYPE_X, /* 0806 */
-  JOINING_TYPE_X, /* 0807 */
-  JOINING_TYPE_X, /* 0808 */
-  JOINING_TYPE_X, /* 0809 */
-  JOINING_TYPE_X, /* 080A */
-  JOINING_TYPE_X, /* 080B */
-  JOINING_TYPE_X, /* 080C */
-  JOINING_TYPE_X, /* 080D */
-  JOINING_TYPE_X, /* 080E */
-  JOINING_TYPE_X, /* 080F */
-  JOINING_TYPE_X, /* 0810 */
-  JOINING_TYPE_X, /* 0811 */
-  JOINING_TYPE_X, /* 0812 */
-  JOINING_TYPE_X, /* 0813 */
-  JOINING_TYPE_X, /* 0814 */
-  JOINING_TYPE_X, /* 0815 */
-  JOINING_TYPE_X, /* 0816 */
-  JOINING_TYPE_X, /* 0817 */
-  JOINING_TYPE_X, /* 0818 */
-  JOINING_TYPE_X, /* 0819 */
-  JOINING_TYPE_X, /* 081A */
-  JOINING_TYPE_X, /* 081B */
-  JOINING_TYPE_X, /* 081C */
-  JOINING_TYPE_X, /* 081D */
-  JOINING_TYPE_X, /* 081E */
-  JOINING_TYPE_X, /* 081F */
-  JOINING_TYPE_X, /* 0820 */
-  JOINING_TYPE_X, /* 0821 */
-  JOINING_TYPE_X, /* 0822 */
-  JOINING_TYPE_X, /* 0823 */
-  JOINING_TYPE_X, /* 0824 */
-  JOINING_TYPE_X, /* 0825 */
-  JOINING_TYPE_X, /* 0826 */
-  JOINING_TYPE_X, /* 0827 */
-  JOINING_TYPE_X, /* 0828 */
-  JOINING_TYPE_X, /* 0829 */
-  JOINING_TYPE_X, /* 082A */
-  JOINING_TYPE_X, /* 082B */
-  JOINING_TYPE_X, /* 082C */
-  JOINING_TYPE_X, /* 082D */
-  JOINING_TYPE_X, /* 082E */
-  JOINING_TYPE_X, /* 082F */
-  JOINING_TYPE_X, /* 0830 */
-  JOINING_TYPE_X, /* 0831 */
-  JOINING_TYPE_X, /* 0832 */
-  JOINING_TYPE_X, /* 0833 */
-  JOINING_TYPE_X, /* 0834 */
-  JOINING_TYPE_X, /* 0835 */
-  JOINING_TYPE_X, /* 0836 */
-  JOINING_TYPE_X, /* 0837 */
-  JOINING_TYPE_X, /* 0838 */
-  JOINING_TYPE_X, /* 0839 */
-  JOINING_TYPE_X, /* 083A */
-  JOINING_TYPE_X, /* 083B */
-  JOINING_TYPE_X, /* 083C */
-  JOINING_TYPE_X, /* 083D */
-  JOINING_TYPE_X, /* 083E */
-  JOINING_TYPE_X, /* 083F */
-  JOINING_TYPE_R, /* 0840; MANDAIC HALQA; R; No_Joining_Group */
-  JOINING_TYPE_D, /* 0841; MANDAIC AB; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0842; MANDAIC AG; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0843; MANDAIC AD; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0844; MANDAIC AH; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0845; MANDAIC USHENNA; D; No_Joining_Group */
-  JOINING_TYPE_R, /* 0846; MANDAIC AZ; R; No_Joining_Group */
-  JOINING_TYPE_D, /* 0847; MANDAIC IT; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0848; MANDAIC ATT; D; No_Joining_Group */
-  JOINING_TYPE_R, /* 0849; MANDAIC AKSA; R; No_Joining_Group */
-  JOINING_TYPE_D, /* 084A; MANDAIC AK; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 084B; MANDAIC AL; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 084C; MANDAIC AM; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 084D; MANDAIC AN; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 084E; MANDAIC AS; D; No_Joining_Group */
-  JOINING_TYPE_R, /* 084F; MANDAIC IN; R; No_Joining_Group */
-  JOINING_TYPE_D, /* 0850; MANDAIC AP; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0851; MANDAIC ASZ; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0852; MANDAIC AQ; D; No_Joining_Group */
-  JOINING_TYPE_D, /* 0853; MANDAIC AR; D; No_Joining_Group */
-  JOINING_TYPE_R, /* 0854; MANDAIC ASH; R; No_Joining_Group */
-  JOINING_TYPE_D, /* 0855; MANDAIC AT; D; No_Joining_Group */
-  JOINING_TYPE_U, /* 0856; MANDAIC DUSHENNA; U; No_Joining_Group */
-  JOINING_TYPE_U, /* 0857; MANDAIC KAD; U; No_Joining_Group */
-  JOINING_TYPE_U, /* 0858; MANDAIC AIN; U; No_Joining_Group */
-
-  /* Arabic Extended-A Characters */
-
-  JOINING_TYPE_X, /* 0859 */
-  JOINING_TYPE_X, /* 085A */
-  JOINING_TYPE_X, /* 085B */
-  JOINING_TYPE_X, /* 085C */
-  JOINING_TYPE_X, /* 085D */
-  JOINING_TYPE_X, /* 085E */
-  JOINING_TYPE_X, /* 085F */
-  JOINING_TYPE_X, /* 0860 */
-  JOINING_TYPE_X, /* 0861 */
-  JOINING_TYPE_X, /* 0862 */
-  JOINING_TYPE_X, /* 0863 */
-  JOINING_TYPE_X, /* 0864 */
-  JOINING_TYPE_X, /* 0865 */
-  JOINING_TYPE_X, /* 0866 */
-  JOINING_TYPE_X, /* 0867 */
-  JOINING_TYPE_X, /* 0868 */
-  JOINING_TYPE_X, /* 0869 */
-  JOINING_TYPE_X, /* 086A */
-  JOINING_TYPE_X, /* 086B */
-  JOINING_TYPE_X, /* 086C */
-  JOINING_TYPE_X, /* 086D */
-  JOINING_TYPE_X, /* 086E */
-  JOINING_TYPE_X, /* 086F */
-  JOINING_TYPE_X, /* 0870 */
-  JOINING_TYPE_X, /* 0871 */
-  JOINING_TYPE_X, /* 0872 */
-  JOINING_TYPE_X, /* 0873 */
-  JOINING_TYPE_X, /* 0874 */
-  JOINING_TYPE_X, /* 0875 */
-  JOINING_TYPE_X, /* 0876 */
-  JOINING_TYPE_X, /* 0877 */
-  JOINING_TYPE_X, /* 0878 */
-  JOINING_TYPE_X, /* 0879 */
-  JOINING_TYPE_X, /* 087A */
-  JOINING_TYPE_X, /* 087B */
-  JOINING_TYPE_X, /* 087C */
-  JOINING_TYPE_X, /* 087D */
-  JOINING_TYPE_X, /* 087E */
-  JOINING_TYPE_X, /* 087F */
-  JOINING_TYPE_X, /* 0880 */
-  JOINING_TYPE_X, /* 0881 */
-  JOINING_TYPE_X, /* 0882 */
-  JOINING_TYPE_X, /* 0883 */
-  JOINING_TYPE_X, /* 0884 */
-  JOINING_TYPE_X, /* 0885 */
-  JOINING_TYPE_X, /* 0886 */
-  JOINING_TYPE_X, /* 0887 */
-  JOINING_TYPE_X, /* 0888 */
-  JOINING_TYPE_X, /* 0889 */
-  JOINING_TYPE_X, /* 088A */
-  JOINING_TYPE_X, /* 088B */
-  JOINING_TYPE_X, /* 088C */
-  JOINING_TYPE_X, /* 088D */
-  JOINING_TYPE_X, /* 088E */
-  JOINING_TYPE_X, /* 088F */
-  JOINING_TYPE_X, /* 0890 */
-  JOINING_TYPE_X, /* 0891 */
-  JOINING_TYPE_X, /* 0892 */
-  JOINING_TYPE_X, /* 0893 */
-  JOINING_TYPE_X, /* 0894 */
-  JOINING_TYPE_X, /* 0895 */
-  JOINING_TYPE_X, /* 0896 */
-  JOINING_TYPE_X, /* 0897 */
-  JOINING_TYPE_X, /* 0898 */
-  JOINING_TYPE_X, /* 0899 */
-  JOINING_TYPE_X, /* 089A */
-  JOINING_TYPE_X, /* 089B */
-  JOINING_TYPE_X, /* 089C */
-  JOINING_TYPE_X, /* 089D */
-  JOINING_TYPE_X, /* 089E */
-  JOINING_TYPE_X, /* 089F */
-  JOINING_TYPE_D, /* 08A0; DOTLESS BEH WITH V BELOW; D; BEH */
-  JOINING_TYPE_X, /* 08A1 */
-  JOINING_TYPE_D, /* 08A2; HAH WITH DOT BELOW AND 2 DOTS ABOVE; D; HAH */
-  JOINING_TYPE_D, /* 08A3; TAH WITH 2 DOTS ABOVE; D; TAH */
-  JOINING_TYPE_D, /* 08A4; DOTLESS FEH WITH DOT BELOW AND 3 DOTS ABOVE; D; FEH */
-  JOINING_TYPE_D, /* 08A5; QAF WITH DOT BELOW; D; QAF */
-  JOINING_TYPE_D, /* 08A6; LAM WITH DOUBLE BAR; D; LAM */
-  JOINING_TYPE_D, /* 08A7; MEEM WITH 3 DOTS ABOVE; D; MEEM */
-  JOINING_TYPE_D, /* 08A8; YEH WITH HAMZA ABOVE; D; YEH */
-  JOINING_TYPE_D, /* 08A9; YEH WITH DOT ABOVE; D; YEH */
-  JOINING_TYPE_R, /* 08AA; REH WITH LOOP; R; REH */
-  JOINING_TYPE_R, /* 08AB; WAW WITH DOT WITHIN; R; WAW */
-  JOINING_TYPE_R, /* 08AC; ROHINGYA YEH; R; ROHINGYA YEH */
+#define joining_offset_0x0600u 0
 
-};
+  /* Arabic */
+
+  /* 0600 */ U,U,U,U,U,U,X,X,U,X,X,U,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 0620 */ D,U,R,R,R,R,D,R,D,R,D,D,D,D,D,R,R,R,R,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* 0640 */ C,D,D,D,D,D,D,D,R,D,D,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 0660 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,D,D,X,R,R,R,U,R,R,R,D,D,D,D,D,D,D,D,
+  /* 0680 */ D,D,D,D,D,D,D,D,R,R,R,R,R,R,R,R,R,R,R,R,R,R,R,R,R,R,D,D,D,D,D,D,
+  /* 06A0 */ D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* 06C0 */ R,D,D,R,R,R,R,R,R,R,R,R,D,R,D,R,D,D,R,R,X,R,X,X,X,X,X,X,X,U,X,X,
+  /* 06E0 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,R,R,X,X,X,X,X,X,X,X,X,X,D,D,D,X,X,D,
+
+  /* Syriac */
+
+  /* 0700 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,A,X,D,D,D,DR,DR,R,R,R,D,D,D,D,R,D,
+  /* 0720 */ D,D,D,D,D,D,D,D,R,D,DR,D,R,D,D,DR,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 0740 */ X,X,X,X,X,X,X,X,X,X,X,X,X,R,D,D,
+
+  /* Arabic Supplement */
+
+  /* 0740 */                                 D,D,D,D,D,D,D,D,D,R,R,R,D,D,D,D,
+  /* 0760 */ D,D,D,D,D,D,D,D,D,D,D,R,R,D,D,D,D,R,D,R,R,D,D,D,R,R,D,D,D,D,D,D,
+
+  /* FILLER */
+
+  /* 0780 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 07A0 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+
+  /* NKo */
+
+  /* 07C0 */ X,X,X,X,X,X,X,X,X,X,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* 07E0 */ D,D,D,D,D,D,D,D,D,D,D,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,C,X,X,X,X,X,
+
+  /* FILLER */
+
+  /* 0800 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 0820 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+
+  /* Mandaic */
+
+  /* 0840 */ R,D,D,D,D,D,R,D,D,R,D,D,D,D,D,R,D,D,D,D,R,D,U,U,U,X,X,X,X,X,X,X,
+  /* 0860 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 0880 */ X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+
+  /* Arabic Extended-A */
+
+  /* 08A0 */ D,D,D,D,D,D,D,D,D,D,R,R,R,U,R,D,D,R,R,
+
+#define joining_offset_0x1806u 691
+
+  /* Mongolian */
+
+  /* 1800 */             U,D,X,X,C,X,X,X,U,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 1820 */ D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* 1840 */ D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* 1860 */ D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,X,X,X,X,X,X,X,X,
+  /* 1880 */ U,U,U,U,U,U,U,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* 18A0 */ D,D,D,D,D,D,D,D,D,X,D,
+
+#define joining_offset_0x200cu 856
+
+  /* General Punctuation */
+
+  /* 2000 */                         U,C,
+
+#define joining_offset_0x2066u 858
+
+  /* General Punctuation */
+
+  /* 2060 */             U,U,U,U,
+
+#define joining_offset_0xa840u 862
+
+  /* Phags-pa */
+
+  /* A840 */ D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,
+  /* A860 */ D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,D,L,U,
+
+#define joining_offset_0x10ac0u 914
+
+  /* Manichaean */
+
+  /* 10AC0 */ D,D,D,D,D,R,U,R,U,R,R,U,U,L,R,R,R,R,R,D,D,D,D,L,D,D,D,D,D,R,D,D,
+  /* 10AE0 */ D,R,U,U,R,X,X,X,X,X,X,D,D,D,D,R,
+
+#define joining_offset_0x10b80u 962
+
+  /* Psalter Pahlavi */
+
+  /* 10B80 */ D,R,D,R,R,R,D,D,D,R,D,D,R,D,R,R,D,R,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
+  /* 10BA0 */ X,X,X,X,X,X,X,X,X,R,R,R,R,D,D,U,
+
+}; /* Table items: 1010; occupancy: 57% */
+
+
+static unsigned int
+joining_type (hb_codepoint_t u)
+{
+  switch (u >> 12)
+  {
+    case 0x0u:
+      if (hb_in_range (u, 0x0600u, 0x08B2u)) return joining_table[u - 0x0600u + joining_offset_0x0600u];
+      break;
+
+    case 0x1u:
+      if (hb_in_range (u, 0x1806u, 0x18AAu)) return joining_table[u - 0x1806u + joining_offset_0x1806u];
+      break;
+
+    case 0x2u:
+      if (hb_in_range (u, 0x200Cu, 0x200Du)) return joining_table[u - 0x200Cu + joining_offset_0x200cu];
+      if (hb_in_range (u, 0x2066u, 0x2069u)) return joining_table[u - 0x2066u + joining_offset_0x2066u];
+      break;
+
+    case 0xAu:
+      if (hb_in_range (u, 0xA840u, 0xA873u)) return joining_table[u - 0xA840u + joining_offset_0xa840u];
+      break;
+
+    case 0x10u:
+      if (hb_in_range (u, 0x10AC0u, 0x10AEFu)) return joining_table[u - 0x10AC0u + joining_offset_0x10ac0u];
+      if (hb_in_range (u, 0x10B80u, 0x10BAFu)) return joining_table[u - 0x10B80u + joining_offset_0x10b80u];
+      break;
+
+    default:
+      break;
+  }
+  return X;
+}
 
-#define JOINING_TABLE_FIRST	0x0600
-#define JOINING_TABLE_LAST	0x08AC
+#undef X
+#undef R
+#undef U
+#undef A
+#undef DR
+#undef L
+#undef C
+#undef D
 
 
 static const uint16_t shaping_table[][4] =
 {
-  {0x0000, 0x0000, 0x0000, 0xFE80}, /* U+0621 ARABIC LETTER HAMZA ISOLATED FORM */
-  {0x0000, 0x0000, 0xFE82, 0xFE81}, /* U+0622 ARABIC LETTER ALEF WITH MADDA ABOVE */
-  {0x0000, 0x0000, 0xFE84, 0xFE83}, /* U+0623 ARABIC LETTER ALEF WITH HAMZA ABOVE */
-  {0x0000, 0x0000, 0xFE86, 0xFE85}, /* U+0624 ARABIC LETTER WAW WITH HAMZA ABOVE */
-  {0x0000, 0x0000, 0xFE88, 0xFE87}, /* U+0625 ARABIC LETTER ALEF WITH HAMZA BELOW */
-  {0xFE8B, 0xFE8C, 0xFE8A, 0xFE89}, /* U+0626 ARABIC LETTER YEH WITH HAMZA ABOVE */
-  {0x0000, 0x0000, 0xFE8E, 0xFE8D}, /* U+0627 ARABIC LETTER ALEF */
-  {0xFE91, 0xFE92, 0xFE90, 0xFE8F}, /* U+0628 ARABIC LETTER BEH */
-  {0x0000, 0x0000, 0xFE94, 0xFE93}, /* U+0629 ARABIC LETTER TEH MARBUTA */
-  {0xFE97, 0xFE98, 0xFE96, 0xFE95}, /* U+062A ARABIC LETTER TEH */
-  {0xFE9B, 0xFE9C, 0xFE9A, 0xFE99}, /* U+062B ARABIC LETTER THEH */
-  {0xFE9F, 0xFEA0, 0xFE9E, 0xFE9D}, /* U+062C ARABIC LETTER JEEM */
-  {0xFEA3, 0xFEA4, 0xFEA2, 0xFEA1}, /* U+062D ARABIC LETTER HAH */
-  {0xFEA7, 0xFEA8, 0xFEA6, 0xFEA5}, /* U+062E ARABIC LETTER KHAH */
-  {0x0000, 0x0000, 0xFEAA, 0xFEA9}, /* U+062F ARABIC LETTER DAL */
-  {0x0000, 0x0000, 0xFEAC, 0xFEAB}, /* U+0630 ARABIC LETTER THAL */
-  {0x0000, 0x0000, 0xFEAE, 0xFEAD}, /* U+0631 ARABIC LETTER REH */
-  {0x0000, 0x0000, 0xFEB0, 0xFEAF}, /* U+0632 ARABIC LETTER ZAIN */
-  {0xFEB3, 0xFEB4, 0xFEB2, 0xFEB1}, /* U+0633 ARABIC LETTER SEEN */
-  {0xFEB7, 0xFEB8, 0xFEB6, 0xFEB5}, /* U+0634 ARABIC LETTER SHEEN */
-  {0xFEBB, 0xFEBC, 0xFEBA, 0xFEB9}, /* U+0635 ARABIC LETTER SAD */
-  {0xFEBF, 0xFEC0, 0xFEBE, 0xFEBD}, /* U+0636 ARABIC LETTER DAD */
-  {0xFEC3, 0xFEC4, 0xFEC2, 0xFEC1}, /* U+0637 ARABIC LETTER TAH */
-  {0xFEC7, 0xFEC8, 0xFEC6, 0xFEC5}, /* U+0638 ARABIC LETTER ZAH */
-  {0xFECB, 0xFECC, 0xFECA, 0xFEC9}, /* U+0639 ARABIC LETTER AIN */
-  {0xFECF, 0xFED0, 0xFECE, 0xFECD}, /* U+063A ARABIC LETTER GHAIN */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+063B  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+063C  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+063D  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+063E  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+063F  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0640  */
-  {0xFED3, 0xFED4, 0xFED2, 0xFED1}, /* U+0641 ARABIC LETTER FEH */
-  {0xFED7, 0xFED8, 0xFED6, 0xFED5}, /* U+0642 ARABIC LETTER QAF */
-  {0xFEDB, 0xFEDC, 0xFEDA, 0xFED9}, /* U+0643 ARABIC LETTER KAF */
-  {0xFEDF, 0xFEE0, 0xFEDE, 0xFEDD}, /* U+0644 ARABIC LETTER LAM */
-  {0xFEE3, 0xFEE4, 0xFEE2, 0xFEE1}, /* U+0645 ARABIC LETTER MEEM */
-  {0xFEE7, 0xFEE8, 0xFEE6, 0xFEE5}, /* U+0646 ARABIC LETTER NOON */
-  {0xFEEB, 0xFEEC, 0xFEEA, 0xFEE9}, /* U+0647 ARABIC LETTER HEH */
-  {0x0000, 0x0000, 0xFEEE, 0xFEED}, /* U+0648 ARABIC LETTER WAW */
-  {0xFBE8, 0xFBE9, 0xFEF0, 0xFEEF}, /* U+0649 ARABIC LETTER */
-  {0xFEF3, 0xFEF4, 0xFEF2, 0xFEF1}, /* U+064A ARABIC LETTER YEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+064B  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+064C  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+064D  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+064E  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+064F  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0650  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0651  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0652  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0653  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0654  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0655  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0656  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0657  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0658  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0659  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+065A  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+065B  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+065C  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+065D  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+065E  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+065F  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0660  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0661  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0662  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0663  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0664  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0665  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0666  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0667  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0668  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0669  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+066A  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+066B  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+066C  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+066D  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+066E  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+066F  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0670  */
-  {0x0000, 0x0000, 0xFB51, 0xFB50}, /* U+0671 ARABIC LETTER ALEF WASLA */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0672  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0673  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0674  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0675  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0676  */
-  {0x0000, 0x0000, 0x0000, 0xFBDD}, /* U+0677 ARABIC LETTER U WITH HAMZA ABOVE ISOLATED FORM */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0678  */
-  {0xFB68, 0xFB69, 0xFB67, 0xFB66}, /* U+0679 ARABIC LETTER TTEH */
-  {0xFB60, 0xFB61, 0xFB5F, 0xFB5E}, /* U+067A ARABIC LETTER TTEHEH */
-  {0xFB54, 0xFB55, 0xFB53, 0xFB52}, /* U+067B ARABIC LETTER BEEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+067C  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+067D  */
-  {0xFB58, 0xFB59, 0xFB57, 0xFB56}, /* U+067E ARABIC LETTER PEH */
-  {0xFB64, 0xFB65, 0xFB63, 0xFB62}, /* U+067F ARABIC LETTER TEHEH */
-  {0xFB5C, 0xFB5D, 0xFB5B, 0xFB5A}, /* U+0680 ARABIC LETTER BEHEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0681  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0682  */
-  {0xFB78, 0xFB79, 0xFB77, 0xFB76}, /* U+0683 ARABIC LETTER NYEH */
-  {0xFB74, 0xFB75, 0xFB73, 0xFB72}, /* U+0684 ARABIC LETTER DYEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0685  */
-  {0xFB7C, 0xFB7D, 0xFB7B, 0xFB7A}, /* U+0686 ARABIC LETTER TCHEH */
-  {0xFB80, 0xFB81, 0xFB7F, 0xFB7E}, /* U+0687 ARABIC LETTER TCHEHEH */
-  {0x0000, 0x0000, 0xFB89, 0xFB88}, /* U+0688 ARABIC LETTER DDAL */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0689  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+068A  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+068B  */
-  {0x0000, 0x0000, 0xFB85, 0xFB84}, /* U+068C ARABIC LETTER DAHAL */
-  {0x0000, 0x0000, 0xFB83, 0xFB82}, /* U+068D ARABIC LETTER DDAHAL */
-  {0x0000, 0x0000, 0xFB87, 0xFB86}, /* U+068E ARABIC LETTER DUL */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+068F  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0690  */
-  {0x0000, 0x0000, 0xFB8D, 0xFB8C}, /* U+0691 ARABIC LETTER RREH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0692  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0693  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0694  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0695  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0696  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0697  */
-  {0x0000, 0x0000, 0xFB8B, 0xFB8A}, /* U+0698 ARABIC LETTER JEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+0699  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+069A  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+069B  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+069C  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+069D  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+069E  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+069F  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A0  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A1  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A2  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A3  */
-  {0xFB6C, 0xFB6D, 0xFB6B, 0xFB6A}, /* U+06A4 ARABIC LETTER VEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A5  */
-  {0xFB70, 0xFB71, 0xFB6F, 0xFB6E}, /* U+06A6 ARABIC LETTER PEHEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A7  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06A8  */
-  {0xFB90, 0xFB91, 0xFB8F, 0xFB8E}, /* U+06A9 ARABIC LETTER KEHEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06AA  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06AB  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06AC  */
-  {0xFBD5, 0xFBD6, 0xFBD4, 0xFBD3}, /* U+06AD ARABIC LETTER NG */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06AE  */
-  {0xFB94, 0xFB95, 0xFB93, 0xFB92}, /* U+06AF ARABIC LETTER GAF */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B0  */
-  {0xFB9C, 0xFB9D, 0xFB9B, 0xFB9A}, /* U+06B1 ARABIC LETTER NGOEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B2  */
-  {0xFB98, 0xFB99, 0xFB97, 0xFB96}, /* U+06B3 ARABIC LETTER GUEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B4  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B5  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B6  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B7  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B8  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06B9  */
-  {0x0000, 0x0000, 0xFB9F, 0xFB9E}, /* U+06BA ARABIC LETTER NOON GHUNNA */
-  {0xFBA2, 0xFBA3, 0xFBA1, 0xFBA0}, /* U+06BB ARABIC LETTER RNOON */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06BC  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06BD  */
-  {0xFBAC, 0xFBAD, 0xFBAB, 0xFBAA}, /* U+06BE ARABIC LETTER HEH DOACHASHMEE */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06BF  */
-  {0x0000, 0x0000, 0xFBA5, 0xFBA4}, /* U+06C0 ARABIC LETTER HEH WITH YEH ABOVE */
-  {0xFBA8, 0xFBA9, 0xFBA7, 0xFBA6}, /* U+06C1 ARABIC LETTER HEH GOAL */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06C2  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06C3  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06C4  */
-  {0x0000, 0x0000, 0xFBE1, 0xFBE0}, /* U+06C5 ARABIC LETTER KIRGHIZ OE */
-  {0x0000, 0x0000, 0xFBDA, 0xFBD9}, /* U+06C6 ARABIC LETTER OE */
-  {0x0000, 0x0000, 0xFBD8, 0xFBD7}, /* U+06C7 ARABIC LETTER U */
-  {0x0000, 0x0000, 0xFBDC, 0xFBDB}, /* U+06C8 ARABIC LETTER YU */
-  {0x0000, 0x0000, 0xFBE3, 0xFBE2}, /* U+06C9 ARABIC LETTER KIRGHIZ YU */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06CA  */
-  {0x0000, 0x0000, 0xFBDF, 0xFBDE}, /* U+06CB ARABIC LETTER VE */
-  {0xFBFE, 0xFBFF, 0xFBFD, 0xFBFC}, /* U+06CC ARABIC LETTER FARSI YEH */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06CD  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06CE  */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06CF  */
-  {0xFBE6, 0xFBE7, 0xFBE5, 0xFBE4}, /* U+06D0 ARABIC LETTER E */
-  {0x0000, 0x0000, 0x0000, 0x0000}, /* U+06D1  */
-  {0x0000, 0x0000, 0xFBAF, 0xFBAE}, /* U+06D2 ARABIC LETTER YEH BARREE */
-  {0x0000, 0x0000, 0xFBB1, 0xFBB0}, /* U+06D3 ARABIC LETTER YEH BARREE WITH HAMZA ABOVE */
+  {0x0000u, 0x0000u, 0x0000u, 0xFE80u}, /* U+0621 ARABIC LETTER HAMZA ISOLATED FORM */
+  {0x0000u, 0x0000u, 0xFE82u, 0xFE81u}, /* U+0622 ARABIC LETTER ALEF WITH MADDA ABOVE */
+  {0x0000u, 0x0000u, 0xFE84u, 0xFE83u}, /* U+0623 ARABIC LETTER ALEF WITH HAMZA ABOVE */
+  {0x0000u, 0x0000u, 0xFE86u, 0xFE85u}, /* U+0624 ARABIC LETTER WAW WITH HAMZA ABOVE */
+  {0x0000u, 0x0000u, 0xFE88u, 0xFE87u}, /* U+0625 ARABIC LETTER ALEF WITH HAMZA BELOW */
+  {0xFE8Bu, 0xFE8Cu, 0xFE8Au, 0xFE89u}, /* U+0626 ARABIC LETTER YEH WITH HAMZA ABOVE */
+  {0x0000u, 0x0000u, 0xFE8Eu, 0xFE8Du}, /* U+0627 ARABIC LETTER ALEF */
+  {0xFE91u, 0xFE92u, 0xFE90u, 0xFE8Fu}, /* U+0628 ARABIC LETTER BEH */
+  {0x0000u, 0x0000u, 0xFE94u, 0xFE93u}, /* U+0629 ARABIC LETTER TEH MARBUTA */
+  {0xFE97u, 0xFE98u, 0xFE96u, 0xFE95u}, /* U+062A ARABIC LETTER TEH */
+  {0xFE9Bu, 0xFE9Cu, 0xFE9Au, 0xFE99u}, /* U+062B ARABIC LETTER THEH */
+  {0xFE9Fu, 0xFEA0u, 0xFE9Eu, 0xFE9Du}, /* U+062C ARABIC LETTER JEEM */
+  {0xFEA3u, 0xFEA4u, 0xFEA2u, 0xFEA1u}, /* U+062D ARABIC LETTER HAH */
+  {0xFEA7u, 0xFEA8u, 0xFEA6u, 0xFEA5u}, /* U+062E ARABIC LETTER KHAH */
+  {0x0000u, 0x0000u, 0xFEAAu, 0xFEA9u}, /* U+062F ARABIC LETTER DAL */
+  {0x0000u, 0x0000u, 0xFEACu, 0xFEABu}, /* U+0630 ARABIC LETTER THAL */
+  {0x0000u, 0x0000u, 0xFEAEu, 0xFEADu}, /* U+0631 ARABIC LETTER REH */
+  {0x0000u, 0x0000u, 0xFEB0u, 0xFEAFu}, /* U+0632 ARABIC LETTER ZAIN */
+  {0xFEB3u, 0xFEB4u, 0xFEB2u, 0xFEB1u}, /* U+0633 ARABIC LETTER SEEN */
+  {0xFEB7u, 0xFEB8u, 0xFEB6u, 0xFEB5u}, /* U+0634 ARABIC LETTER SHEEN */
+  {0xFEBBu, 0xFEBCu, 0xFEBAu, 0xFEB9u}, /* U+0635 ARABIC LETTER SAD */
+  {0xFEBFu, 0xFEC0u, 0xFEBEu, 0xFEBDu}, /* U+0636 ARABIC LETTER DAD */
+  {0xFEC3u, 0xFEC4u, 0xFEC2u, 0xFEC1u}, /* U+0637 ARABIC LETTER TAH */
+  {0xFEC7u, 0xFEC8u, 0xFEC6u, 0xFEC5u}, /* U+0638 ARABIC LETTER ZAH */
+  {0xFECBu, 0xFECCu, 0xFECAu, 0xFEC9u}, /* U+0639 ARABIC LETTER AIN */
+  {0xFECFu, 0xFED0u, 0xFECEu, 0xFECDu}, /* U+063A ARABIC LETTER GHAIN */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+063B  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+063C  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+063D  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+063E  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+063F  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0640  */
+  {0xFED3u, 0xFED4u, 0xFED2u, 0xFED1u}, /* U+0641 ARABIC LETTER FEH */
+  {0xFED7u, 0xFED8u, 0xFED6u, 0xFED5u}, /* U+0642 ARABIC LETTER QAF */
+  {0xFEDBu, 0xFEDCu, 0xFEDAu, 0xFED9u}, /* U+0643 ARABIC LETTER KAF */
+  {0xFEDFu, 0xFEE0u, 0xFEDEu, 0xFEDDu}, /* U+0644 ARABIC LETTER LAM */
+  {0xFEE3u, 0xFEE4u, 0xFEE2u, 0xFEE1u}, /* U+0645 ARABIC LETTER MEEM */
+  {0xFEE7u, 0xFEE8u, 0xFEE6u, 0xFEE5u}, /* U+0646 ARABIC LETTER NOON */
+  {0xFEEBu, 0xFEECu, 0xFEEAu, 0xFEE9u}, /* U+0647 ARABIC LETTER HEH */
+  {0x0000u, 0x0000u, 0xFEEEu, 0xFEEDu}, /* U+0648 ARABIC LETTER WAW */
+  {0xFBE8u, 0xFBE9u, 0xFEF0u, 0xFEEFu}, /* U+0649 ARABIC LETTER */
+  {0xFEF3u, 0xFEF4u, 0xFEF2u, 0xFEF1u}, /* U+064A ARABIC LETTER YEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+064B  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+064C  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+064D  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+064E  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+064F  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0650  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0651  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0652  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0653  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0654  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0655  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0656  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0657  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0658  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0659  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+065A  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+065B  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+065C  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+065D  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+065E  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+065F  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0660  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0661  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0662  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0663  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0664  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0665  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0666  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0667  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0668  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0669  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+066A  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+066B  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+066C  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+066D  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+066E  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+066F  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0670  */
+  {0x0000u, 0x0000u, 0xFB51u, 0xFB50u}, /* U+0671 ARABIC LETTER ALEF WASLA */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0672  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0673  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0674  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0675  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0676  */
+  {0x0000u, 0x0000u, 0x0000u, 0xFBDDu}, /* U+0677 ARABIC LETTER U WITH HAMZA ABOVE ISOLATED FORM */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0678  */
+  {0xFB68u, 0xFB69u, 0xFB67u, 0xFB66u}, /* U+0679 ARABIC LETTER TTEH */
+  {0xFB60u, 0xFB61u, 0xFB5Fu, 0xFB5Eu}, /* U+067A ARABIC LETTER TTEHEH */
+  {0xFB54u, 0xFB55u, 0xFB53u, 0xFB52u}, /* U+067B ARABIC LETTER BEEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+067C  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+067D  */
+  {0xFB58u, 0xFB59u, 0xFB57u, 0xFB56u}, /* U+067E ARABIC LETTER PEH */
+  {0xFB64u, 0xFB65u, 0xFB63u, 0xFB62u}, /* U+067F ARABIC LETTER TEHEH */
+  {0xFB5Cu, 0xFB5Du, 0xFB5Bu, 0xFB5Au}, /* U+0680 ARABIC LETTER BEHEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0681  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0682  */
+  {0xFB78u, 0xFB79u, 0xFB77u, 0xFB76u}, /* U+0683 ARABIC LETTER NYEH */
+  {0xFB74u, 0xFB75u, 0xFB73u, 0xFB72u}, /* U+0684 ARABIC LETTER DYEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0685  */
+  {0xFB7Cu, 0xFB7Du, 0xFB7Bu, 0xFB7Au}, /* U+0686 ARABIC LETTER TCHEH */
+  {0xFB80u, 0xFB81u, 0xFB7Fu, 0xFB7Eu}, /* U+0687 ARABIC LETTER TCHEHEH */
+  {0x0000u, 0x0000u, 0xFB89u, 0xFB88u}, /* U+0688 ARABIC LETTER DDAL */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0689  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+068A  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+068B  */
+  {0x0000u, 0x0000u, 0xFB85u, 0xFB84u}, /* U+068C ARABIC LETTER DAHAL */
+  {0x0000u, 0x0000u, 0xFB83u, 0xFB82u}, /* U+068D ARABIC LETTER DDAHAL */
+  {0x0000u, 0x0000u, 0xFB87u, 0xFB86u}, /* U+068E ARABIC LETTER DUL */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+068F  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0690  */
+  {0x0000u, 0x0000u, 0xFB8Du, 0xFB8Cu}, /* U+0691 ARABIC LETTER RREH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0692  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0693  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0694  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0695  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0696  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0697  */
+  {0x0000u, 0x0000u, 0xFB8Bu, 0xFB8Au}, /* U+0698 ARABIC LETTER JEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+0699  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+069A  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+069B  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+069C  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+069D  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+069E  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+069F  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A0  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A1  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A2  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A3  */
+  {0xFB6Cu, 0xFB6Du, 0xFB6Bu, 0xFB6Au}, /* U+06A4 ARABIC LETTER VEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A5  */
+  {0xFB70u, 0xFB71u, 0xFB6Fu, 0xFB6Eu}, /* U+06A6 ARABIC LETTER PEHEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A7  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06A8  */
+  {0xFB90u, 0xFB91u, 0xFB8Fu, 0xFB8Eu}, /* U+06A9 ARABIC LETTER KEHEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06AA  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06AB  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06AC  */
+  {0xFBD5u, 0xFBD6u, 0xFBD4u, 0xFBD3u}, /* U+06AD ARABIC LETTER NG */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06AE  */
+  {0xFB94u, 0xFB95u, 0xFB93u, 0xFB92u}, /* U+06AF ARABIC LETTER GAF */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B0  */
+  {0xFB9Cu, 0xFB9Du, 0xFB9Bu, 0xFB9Au}, /* U+06B1 ARABIC LETTER NGOEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B2  */
+  {0xFB98u, 0xFB99u, 0xFB97u, 0xFB96u}, /* U+06B3 ARABIC LETTER GUEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B4  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B5  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B6  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B7  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B8  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06B9  */
+  {0x0000u, 0x0000u, 0xFB9Fu, 0xFB9Eu}, /* U+06BA ARABIC LETTER NOON GHUNNA */
+  {0xFBA2u, 0xFBA3u, 0xFBA1u, 0xFBA0u}, /* U+06BB ARABIC LETTER RNOON */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06BC  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06BD  */
+  {0xFBACu, 0xFBADu, 0xFBABu, 0xFBAAu}, /* U+06BE ARABIC LETTER HEH DOACHASHMEE */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06BF  */
+  {0x0000u, 0x0000u, 0xFBA5u, 0xFBA4u}, /* U+06C0 ARABIC LETTER HEH WITH YEH ABOVE */
+  {0xFBA8u, 0xFBA9u, 0xFBA7u, 0xFBA6u}, /* U+06C1 ARABIC LETTER HEH GOAL */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06C2  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06C3  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06C4  */
+  {0x0000u, 0x0000u, 0xFBE1u, 0xFBE0u}, /* U+06C5 ARABIC LETTER KIRGHIZ OE */
+  {0x0000u, 0x0000u, 0xFBDAu, 0xFBD9u}, /* U+06C6 ARABIC LETTER OE */
+  {0x0000u, 0x0000u, 0xFBD8u, 0xFBD7u}, /* U+06C7 ARABIC LETTER U */
+  {0x0000u, 0x0000u, 0xFBDCu, 0xFBDBu}, /* U+06C8 ARABIC LETTER YU */
+  {0x0000u, 0x0000u, 0xFBE3u, 0xFBE2u}, /* U+06C9 ARABIC LETTER KIRGHIZ YU */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06CA  */
+  {0x0000u, 0x0000u, 0xFBDFu, 0xFBDEu}, /* U+06CB ARABIC LETTER VE */
+  {0xFBFEu, 0xFBFFu, 0xFBFDu, 0xFBFCu}, /* U+06CC ARABIC LETTER FARSI YEH */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06CD  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06CE  */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06CF  */
+  {0xFBE6u, 0xFBE7u, 0xFBE5u, 0xFBE4u}, /* U+06D0 ARABIC LETTER E */
+  {0x0000u, 0x0000u, 0x0000u, 0x0000u}, /* U+06D1  */
+  {0x0000u, 0x0000u, 0xFBAFu, 0xFBAEu}, /* U+06D2 ARABIC LETTER YEH BARREE */
+  {0x0000u, 0x0000u, 0xFBB1u, 0xFBB0u}, /* U+06D3 ARABIC LETTER YEH BARREE WITH HAMZA ABOVE */
 };
 
-#define SHAPING_TABLE_FIRST	0x0621
-#define SHAPING_TABLE_LAST	0x06D3
+#define SHAPING_TABLE_FIRST	0x0621u
+#define SHAPING_TABLE_LAST	0x06D3u
 
 
 static const struct ligature_set_t {
@@ -922,17 +363,17 @@ static const struct ligature_set_t {
  } ligatures[4];
 } ligature_table[] =
 {
-  { 0xFEDF, {
-    { 0xFE88, 0xFEF9 }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA BELOW ISOLATED FORM */
-    { 0xFE82, 0xFEF5 }, /* ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE ISOLATED FORM */
-    { 0xFE8E, 0xFEFB }, /* ARABIC LIGATURE LAM WITH ALEF ISOLATED FORM */
-    { 0xFE84, 0xFEF7 }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE ISOLATED FORM */
+  { 0xFEDFu, {
+    { 0xFE88u, 0xFEF9u }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA BELOW ISOLATED FORM */
+    { 0xFE82u, 0xFEF5u }, /* ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE ISOLATED FORM */
+    { 0xFE8Eu, 0xFEFBu }, /* ARABIC LIGATURE LAM WITH ALEF ISOLATED FORM */
+    { 0xFE84u, 0xFEF7u }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE ISOLATED FORM */
   }},
-  { 0xFEE0, {
-    { 0xFE88, 0xFEFA }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA BELOW FINAL FORM */
-    { 0xFE82, 0xFEF6 }, /* ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE FINAL FORM */
-    { 0xFE8E, 0xFEFC }, /* ARABIC LIGATURE LAM WITH ALEF FINAL FORM */
-    { 0xFE84, 0xFEF8 }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE FINAL FORM */
+  { 0xFEE0u, {
+    { 0xFE88u, 0xFEFAu }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA BELOW FINAL FORM */
+    { 0xFE82u, 0xFEF6u }, /* ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE FINAL FORM */
+    { 0xFE8Eu, 0xFEFCu }, /* ARABIC LIGATURE LAM WITH ALEF FINAL FORM */
+    { 0xFE84u, 0xFEF8u }, /* ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE FINAL FORM */
   }},
 };
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic.cc
index ea6d85c1e6..9870ba3da0 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-arabic.cc
@@ -57,68 +57,41 @@ enum {
 
 static unsigned int get_joining_type (hb_codepoint_t u, hb_unicode_general_category_t gen_cat)
 {
-  if (likely (hb_in_range<hb_codepoint_t> (u, JOINING_TABLE_FIRST, JOINING_TABLE_LAST))) {
-    unsigned int j_type = joining_table[u - JOINING_TABLE_FIRST];
-    if (likely (j_type != JOINING_TYPE_X))
-      return j_type;
-  }
-
-  /* Mongolian joining data is not in ArabicJoining.txt yet. */
-  if (unlikely (hb_in_range<hb_codepoint_t> (u, 0x1800, 0x18AF)))
-  {
-    if (unlikely (hb_in_range<hb_codepoint_t> (u, 0x1880, 0x1886)))
-      return JOINING_TYPE_U;
-
-    /* All letters, SIBE SYLLABLE BOUNDARY MARKER, and NIRUGU are D */
-    if ((FLAG(gen_cat) & (FLAG (HB_UNICODE_GENERAL_CATEGORY_OTHER_LETTER) |
-			  FLAG (HB_UNICODE_GENERAL_CATEGORY_MODIFIER_LETTER)))
-	|| u == 0x1807 || u == 0x180A)
-      return JOINING_TYPE_D;
-  }
-
-  /* 'Phags-pa joining data is not in ArabicJoining.txt yet. */
-  if (unlikely (hb_in_range<hb_codepoint_t> (u, 0xA840, 0xA872)))
-  {
-      if (unlikely (u == 0xA872))
-	return JOINING_TYPE_L;
-
-      return JOINING_TYPE_D;
-  }
-
-  if (unlikely (hb_in_range<hb_codepoint_t> (u, 0x200C, 0x200D)))
-  {
-    return u == 0x200C ? JOINING_TYPE_U : JOINING_TYPE_C;
-  }
-
-  return (FLAG(gen_cat) & (FLAG(HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK) | FLAG(HB_UNICODE_GENERAL_CATEGORY_ENCLOSING_MARK) | FLAG(HB_UNICODE_GENERAL_CATEGORY_FORMAT))) ?
-	 JOINING_TYPE_T : JOINING_TYPE_U;
+  unsigned int j_type = joining_type(u);
+  if (likely (j_type != JOINING_TYPE_X))
+    return j_type;
+
+  return (FLAG(gen_cat) &
+	  (FLAG(HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK) |
+	   FLAG(HB_UNICODE_GENERAL_CATEGORY_ENCLOSING_MARK) |
+	   FLAG(HB_UNICODE_GENERAL_CATEGORY_FORMAT))
+	 ) ?  JOINING_TYPE_T : JOINING_TYPE_U;
 }
 
+#define FEATURE_IS_SYRIAC(tag) hb_in_range<unsigned char> ((unsigned char) (tag), '2', '3')
+
 static const hb_tag_t arabic_features[] =
 {
-  HB_TAG('i','n','i','t'),
-  HB_TAG('m','e','d','i'),
-  HB_TAG('f','i','n','a'),
   HB_TAG('i','s','o','l'),
-  /* Syriac */
-  HB_TAG('m','e','d','2'),
+  HB_TAG('f','i','n','a'),
   HB_TAG('f','i','n','2'),
   HB_TAG('f','i','n','3'),
+  HB_TAG('m','e','d','i'),
+  HB_TAG('m','e','d','2'),
+  HB_TAG('i','n','i','t'),
   HB_TAG_NONE
 };
 
 
 /* Same order as the feature array */
 enum {
-  INIT,
-  MEDI,
-  FINA,
   ISOL,
-
-  /* Syriac */
-  MED2,
+  FINA,
   FIN2,
   FIN3,
+  MEDI,
+  MED2,
+  INIT,
 
   NONE,
 
@@ -171,14 +144,23 @@ collect_features_arabic (hb_ot_shape_planner_t *plan)
 {
   hb_ot_map_builder_t *map = &plan->map;
 
-  /* For Language forms (in ArabicOT speak), we do the iso/fina/medi/init together,
-   * then rlig and calt each in their own stage.  This makes IranNastaliq's ALLAH
-   * ligature work correctly. It's unfortunate though...
+  /* We apply features according to the Arabic spec, with pauses
+   * in between most.
    *
-   * This also makes Arial Bold in Windows7 work.  See:
+   * The pause between init/medi/... and rlig is required.  See eg:
    * https://bugzilla.mozilla.org/show_bug.cgi?id=644184
    *
-   * TODO: Add test cases for these two.
+   * The pauses between init/medi/... themselves are not necessarily
+   * needed as only one of those features is applied to any character.
+   * The only difference it makes is when fonts have contextual
+   * substitutions.  We now follow the order of the spec, which makes
+   * for better experience if that's what Uniscribe is doing.
+   *
+   * At least for Arabic, looks like Uniscribe has a pause between
+   * rlig and calt.  Otherwise the IranNastaliq's ALLAH ligature won't
+   * work.  However, testing shows that rlig and calt are applied
+   * together for Mongolian in Uniscribe.  As such, we only add a
+   * pause for Arabic, not other scripts.
    */
 
   map->add_gsub_pause (nuke_joiners);
@@ -189,16 +171,28 @@ collect_features_arabic (hb_ot_shape_planner_t *plan)
   map->add_gsub_pause (NULL);
 
   for (unsigned int i = 0; i < ARABIC_NUM_FEATURES; i++)
-    map->add_feature (arabic_features[i], 1, i < 4 ? F_HAS_FALLBACK : F_NONE); /* The first four features have fallback. */
-
-  map->add_gsub_pause (NULL);
+  {
+    bool has_fallback = plan->props.script == HB_SCRIPT_ARABIC && !FEATURE_IS_SYRIAC (arabic_features[i]);
+    map->add_feature (arabic_features[i], 1, has_fallback ? F_HAS_FALLBACK : F_NONE);
+    map->add_gsub_pause (NULL);
+  }
 
   map->add_feature (HB_TAG('r','l','i','g'), 1, F_GLOBAL|F_HAS_FALLBACK);
-  map->add_gsub_pause (arabic_fallback_shape);
+  if (plan->props.script == HB_SCRIPT_ARABIC)
+    map->add_gsub_pause (arabic_fallback_shape);
 
   map->add_global_bool_feature (HB_TAG('c','a','l','t'));
   map->add_gsub_pause (NULL);
 
+  /* The spec includes 'cswh'.  Earlier versions of Windows
+   * used to enable this by default, but testing suggests
+   * that Windows 8 and later do not enable it by default,
+   * and spec now says 'Off by default'.
+   * We disabled this in ae23c24c32.
+   * Note that IranNastaliq uses this feature extensively
+   * to fixup broken glyph sequences.  Oh well...
+   * Test case: U+0643,U+0640,U+0631. */
+  //map->add_global_bool_feature (HB_TAG('c','s','w','h'));
   map->add_global_bool_feature (HB_TAG('m','s','e','t'));
 }
 
@@ -228,8 +222,9 @@ data_create_arabic (const hb_ot_shape_plan_t *plan)
   arabic_plan->do_fallback = plan->props.script == HB_SCRIPT_ARABIC;
   for (unsigned int i = 0; i < ARABIC_NUM_FEATURES; i++) {
     arabic_plan->mask_array[i] = plan->map.get_1_mask (arabic_features[i]);
-    if (i < 4)
-      arabic_plan->do_fallback = arabic_plan->do_fallback && plan->map.needs_fallback (arabic_features[i]);
+    arabic_plan->do_fallback = arabic_plan->do_fallback &&
+			       !FEATURE_IS_SYRIAC (arabic_features[i]) &&
+			       plan->map.needs_fallback (arabic_features[i]);
   }
 
   return arabic_plan;
@@ -249,10 +244,9 @@ static void
 arabic_joining (hb_buffer_t *buffer)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   unsigned int prev = (unsigned int) -1, state = 0;
 
-  HB_BUFFER_ALLOCATE_VAR (buffer, arabic_shaping_action);
-
   /* Check pre-context */
   if (!(buffer->flags & HB_BUFFER_FLAG_BOT))
     for (unsigned int i = 0; i < buffer->context_len[0]; i++)
@@ -269,20 +263,19 @@ arabic_joining (hb_buffer_t *buffer)
 
   for (unsigned int i = 0; i < count; i++)
   {
-    unsigned int this_type = get_joining_type (buffer->info[i].codepoint, _hb_glyph_info_get_general_category (&buffer->info[i]));
+    unsigned int this_type = get_joining_type (info[i].codepoint, _hb_glyph_info_get_general_category (&info[i]));
 
     if (unlikely (this_type == JOINING_TYPE_T)) {
-      buffer->info[i].arabic_shaping_action() = NONE;
+      info[i].arabic_shaping_action() = NONE;
       continue;
     }
 
     const arabic_state_table_entry *entry = &arabic_state_table[state][this_type];
 
     if (entry->prev_action != NONE && prev != (unsigned int) -1)
-      for (; prev < i; prev++)
-	buffer->info[prev].arabic_shaping_action() = entry->prev_action;
+      info[prev].arabic_shaping_action() = entry->prev_action;
 
-    buffer->info[i].arabic_shaping_action() = entry->curr_action;
+    info[i].arabic_shaping_action() = entry->curr_action;
 
     prev = i;
     state = entry->next_state;
@@ -298,12 +291,20 @@ arabic_joining (hb_buffer_t *buffer)
 
       const arabic_state_table_entry *entry = &arabic_state_table[state][this_type];
       if (entry->prev_action != NONE && prev != (unsigned int) -1)
-	buffer->info[prev].arabic_shaping_action() = entry->prev_action;
+	info[prev].arabic_shaping_action() = entry->prev_action;
       break;
     }
+}
 
-
-  HB_BUFFER_DEALLOCATE_VAR (buffer, arabic_shaping_action);
+static void
+mongolian_variation_selectors (hb_buffer_t *buffer)
+{
+  /* Copy arabic_shaping_action() from base to Mongolian variation selectors. */
+  unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
+  for (unsigned int i = 1; i < count; i++)
+    if (unlikely (hb_in_range (info[i].codepoint, 0x180Bu, 0x180Du)))
+      info[i].arabic_shaping_action() = info[i - 1].arabic_shaping_action();
 }
 
 static void
@@ -311,12 +312,20 @@ setup_masks_arabic (const hb_ot_shape_plan_t *plan,
 		    hb_buffer_t              *buffer,
 		    hb_font_t                *font HB_UNUSED)
 {
+  HB_BUFFER_ALLOCATE_VAR (buffer, arabic_shaping_action);
+
   const arabic_shape_plan_t *arabic_plan = (const arabic_shape_plan_t *) plan->data;
 
   arabic_joining (buffer);
+  if (plan->props.script == HB_SCRIPT_MONGOLIAN)
+    mongolian_variation_selectors (buffer);
+
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    buffer->info[i].mask |= arabic_plan->mask_array[buffer->info[i].arabic_shaping_action()];
+    info[i].mask |= arabic_plan->mask_array[info[i].arabic_shaping_action()];
+
+  HB_BUFFER_DEALLOCATE_VAR (buffer, arabic_shaping_action);
 }
 
 
@@ -326,9 +335,10 @@ nuke_joiners (const hb_ot_shape_plan_t *plan HB_UNUSED,
 	      hb_buffer_t *buffer)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if (_hb_glyph_info_is_zwj (&buffer->info[i]))
-      _hb_glyph_info_flip_joiners (&buffer->info[i]);
+    if (_hb_glyph_info_is_zwj (&info[i]))
+      _hb_glyph_info_flip_joiners (&info[i]);
 }
 
 static void
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hangul.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hangul.cc
index 47aa44fedb..54c12ebca2 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hangul.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hangul.cc
@@ -86,26 +86,26 @@ data_destroy_hangul (void *data)
 }
 
 /* Constants for algorithmic hangul syllable [de]composition. */
-#define LBase 0x1100
-#define VBase 0x1161
-#define TBase 0x11A7
-#define LCount 19
-#define VCount 21
-#define TCount 28
-#define SBase 0xAC00
+#define LBase 0x1100u
+#define VBase 0x1161u
+#define TBase 0x11A7u
+#define LCount 19u
+#define VCount 21u
+#define TCount 28u
+#define SBase 0xAC00u
 #define NCount (VCount * TCount)
 #define SCount (LCount * NCount)
 
-#define isCombiningL(u) (hb_in_range<hb_codepoint_t> ((u), LBase, LBase+LCount-1))
-#define isCombiningV(u) (hb_in_range<hb_codepoint_t> ((u), VBase, VBase+VCount-1))
-#define isCombiningT(u) (hb_in_range<hb_codepoint_t> ((u), TBase+1, TBase+TCount-1))
-#define isCombinedS(u) (hb_in_range<hb_codepoint_t> ((u), SBase, SBase+SCount-1))
+#define isCombiningL(u) (hb_in_range ((u), LBase, LBase+LCount-1))
+#define isCombiningV(u) (hb_in_range ((u), VBase, VBase+VCount-1))
+#define isCombiningT(u) (hb_in_range ((u), TBase+1, TBase+TCount-1))
+#define isCombinedS(u) (hb_in_range ((u), SBase, SBase+SCount-1))
 
-#define isL(u) (hb_in_ranges<hb_codepoint_t> ((u), 0x1100, 0x115F, 0xA960, 0xA97C))
-#define isV(u) (hb_in_ranges<hb_codepoint_t> ((u), 0x1160, 0x11A7, 0xD7B0, 0xD7C6))
-#define isT(u) (hb_in_ranges<hb_codepoint_t> ((u), 0x11A8, 0x11FF, 0xD7CB, 0xD7FB))
+#define isL(u) (hb_in_ranges ((u), 0x1100u, 0x115Fu, 0xA960u, 0xA97Cu))
+#define isV(u) (hb_in_ranges ((u), 0x1160u, 0x11A7u, 0xD7B0u, 0xD7C6u))
+#define isT(u) (hb_in_ranges ((u), 0x11A8u, 0x11FFu, 0xD7CBu, 0xD7FBu))
 
-#define isHangulTone(u) (hb_in_range<hb_codepoint_t> ((u), 0x302e, 0x302f))
+#define isHangulTone(u) (hb_in_range ((u), 0x302Eu, 0x302Fu))
 
 /* buffer var allocations */
 #define hangul_shaping_feature() complex_var_u8_0() /* hangul jamo shaping feature */
@@ -211,14 +211,14 @@ preprocess_text_hangul (const hb_ot_shape_plan_t *plan,
       else
       {
 	/* No valid syllable as base for tone mark; try to insert dotted circle. */
-	if (font->has_glyph (0x25cc))
+	if (font->has_glyph (0x25CCu))
 	{
 	  hb_codepoint_t chars[2];
 	  if (!is_zero_width_char (font, u)) {
 	    chars[0] = u;
-	    chars[1] = 0x25cc;
+	    chars[1] = 0x25CCu;
 	  } else {
-	    chars[0] = 0x25cc;
+	    chars[0] = 0x25CCu;
 	    chars[1] = u;
 	  }
 	  buffer->replace_glyphs (1, 2, chars);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hebrew.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hebrew.cc
index efef8c14ad..2381a6e732 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hebrew.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-hebrew.cc
@@ -35,116 +35,116 @@ compose_hebrew (const hb_ot_shape_normalize_context_t *c,
 {
   /* Hebrew presentation-form shaping.
    * https://bugzilla.mozilla.org/show_bug.cgi?id=728866
-   * Hebrew presentation forms with dagesh, for characters 0x05D0..0x05EA;
+   * Hebrew presentation forms with dagesh, for characters U+05D0..05EA;
    * Note that some letters do not have a dagesh presForm encoded.
    */
-  static const hb_codepoint_t sDageshForms[0x05EA - 0x05D0 + 1] = {
-    0xFB30, /* ALEF */
-    0xFB31, /* BET */
-    0xFB32, /* GIMEL */
-    0xFB33, /* DALET */
-    0xFB34, /* HE */
-    0xFB35, /* VAV */
-    0xFB36, /* ZAYIN */
-    0x0000, /* HET */
-    0xFB38, /* TET */
-    0xFB39, /* YOD */
-    0xFB3A, /* FINAL KAF */
-    0xFB3B, /* KAF */
-    0xFB3C, /* LAMED */
-    0x0000, /* FINAL MEM */
-    0xFB3E, /* MEM */
-    0x0000, /* FINAL NUN */
-    0xFB40, /* NUN */
-    0xFB41, /* SAMEKH */
-    0x0000, /* AYIN */
-    0xFB43, /* FINAL PE */
-    0xFB44, /* PE */
-    0x0000, /* FINAL TSADI */
-    0xFB46, /* TSADI */
-    0xFB47, /* QOF */
-    0xFB48, /* RESH */
-    0xFB49, /* SHIN */
-    0xFB4A /* TAV */
+  static const hb_codepoint_t sDageshForms[0x05EAu - 0x05D0u + 1] = {
+    0xFB30u, /* ALEF */
+    0xFB31u, /* BET */
+    0xFB32u, /* GIMEL */
+    0xFB33u, /* DALET */
+    0xFB34u, /* HE */
+    0xFB35u, /* VAV */
+    0xFB36u, /* ZAYIN */
+    0x0000u, /* HET */
+    0xFB38u, /* TET */
+    0xFB39u, /* YOD */
+    0xFB3Au, /* FINAL KAF */
+    0xFB3Bu, /* KAF */
+    0xFB3Cu, /* LAMED */
+    0x0000u, /* FINAL MEM */
+    0xFB3Eu, /* MEM */
+    0x0000u, /* FINAL NUN */
+    0xFB40u, /* NUN */
+    0xFB41u, /* SAMEKH */
+    0x0000u, /* AYIN */
+    0xFB43u, /* FINAL PE */
+    0xFB44u, /* PE */
+    0x0000u, /* FINAL TSADI */
+    0xFB46u, /* TSADI */
+    0xFB47u, /* QOF */
+    0xFB48u, /* RESH */
+    0xFB49u, /* SHIN */
+    0xFB4Au /* TAV */
   };
 
   bool found = c->unicode->compose (a, b, ab);
 
-  if (!found)
+  if (!found && !c->plan->has_mark)
   {
       /* Special-case Hebrew presentation forms that are excluded from
        * standard normalization, but wanted for old fonts. */
       switch (b) {
-      case 0x05B4: /* HIRIQ */
-	  if (a == 0x05D9) { /* YOD */
-	      *ab = 0xFB1D;
+      case 0x05B4u: /* HIRIQ */
+	  if (a == 0x05D9u) { /* YOD */
+	      *ab = 0xFB1Du;
 	      found = true;
 	  }
 	  break;
-      case 0x05B7: /* patah */
-	  if (a == 0x05F2) { /* YIDDISH YOD YOD */
-	      *ab = 0xFB1F;
+      case 0x05B7u: /* patah */
+	  if (a == 0x05F2u) { /* YIDDISH YOD YOD */
+	      *ab = 0xFB1Fu;
 	      found = true;
-	  } else if (a == 0x05D0) { /* ALEF */
-	      *ab = 0xFB2E;
+	  } else if (a == 0x05D0u) { /* ALEF */
+	      *ab = 0xFB2Eu;
 	      found = true;
 	  }
 	  break;
-      case 0x05B8: /* QAMATS */
-	  if (a == 0x05D0) { /* ALEF */
-	      *ab = 0xFB2F;
+      case 0x05B8u: /* QAMATS */
+	  if (a == 0x05D0u) { /* ALEF */
+	      *ab = 0xFB2Fu;
 	      found = true;
 	  }
 	  break;
-      case 0x05B9: /* HOLAM */
-	  if (a == 0x05D5) { /* VAV */
-	      *ab = 0xFB4B;
+      case 0x05B9u: /* HOLAM */
+	  if (a == 0x05D5u) { /* VAV */
+	      *ab = 0xFB4Bu;
 	      found = true;
 	  }
 	  break;
-      case 0x05BC: /* DAGESH */
-	  if (a >= 0x05D0 && a <= 0x05EA) {
-	      *ab = sDageshForms[a - 0x05D0];
+      case 0x05BCu: /* DAGESH */
+	  if (a >= 0x05D0u && a <= 0x05EAu) {
+	      *ab = sDageshForms[a - 0x05D0u];
 	      found = (*ab != 0);
-	  } else if (a == 0xFB2A) { /* SHIN WITH SHIN DOT */
-	      *ab = 0xFB2C;
+	  } else if (a == 0xFB2Au) { /* SHIN WITH SHIN DOT */
+	      *ab = 0xFB2Cu;
 	      found = true;
-	  } else if (a == 0xFB2B) { /* SHIN WITH SIN DOT */
-	      *ab = 0xFB2D;
+	  } else if (a == 0xFB2Bu) { /* SHIN WITH SIN DOT */
+	      *ab = 0xFB2Du;
 	      found = true;
 	  }
 	  break;
-      case 0x05BF: /* RAFE */
+      case 0x05BFu: /* RAFE */
 	  switch (a) {
-	  case 0x05D1: /* BET */
-	      *ab = 0xFB4C;
+	  case 0x05D1u: /* BET */
+	      *ab = 0xFB4Cu;
 	      found = true;
 	      break;
-	  case 0x05DB: /* KAF */
-	      *ab = 0xFB4D;
+	  case 0x05DBu: /* KAF */
+	      *ab = 0xFB4Du;
 	      found = true;
 	      break;
-	  case 0x05E4: /* PE */
-	      *ab = 0xFB4E;
+	  case 0x05E4u: /* PE */
+	      *ab = 0xFB4Eu;
 	      found = true;
 	      break;
 	  }
 	  break;
-      case 0x05C1: /* SHIN DOT */
-	  if (a == 0x05E9) { /* SHIN */
-	      *ab = 0xFB2A;
+      case 0x05C1u: /* SHIN DOT */
+	  if (a == 0x05E9u) { /* SHIN */
+	      *ab = 0xFB2Au;
 	      found = true;
-	  } else if (a == 0xFB49) { /* SHIN WITH DAGESH */
-	      *ab = 0xFB2C;
+	  } else if (a == 0xFB49u) { /* SHIN WITH DAGESH */
+	      *ab = 0xFB2Cu;
 	      found = true;
 	  }
 	  break;
-      case 0x05C2: /* SIN DOT */
-	  if (a == 0x05E9) { /* SHIN */
-	      *ab = 0xFB2B;
+      case 0x05C2u: /* SIN DOT */
+	  if (a == 0x05E9u) { /* SHIN */
+	      *ab = 0xFB2Bu;
 	      found = true;
-	  } else if (a == 0xFB49) { /* SHIN WITH DAGESH */
-	      *ab = 0xFB2D;
+	  } else if (a == 0xFB49u) { /* SHIN WITH DAGESH */
+	      *ab = 0xFB2Du;
 	      found = true;
 	  }
 	  break;
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-machine.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-machine.hh
index 71621034ee..522ccc67fe 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-machine.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-machine.hh
@@ -55,52 +55,52 @@ static const unsigned char _indic_syllable_machine_trans_keys[] = {
 	4u, 14u, 5u, 7u, 5u, 7u, 5u, 7u, 5u, 7u, 7u, 7u, 5u, 7u, 5u, 7u, 
 	7u, 7u, 5u, 7u, 5u, 7u, 7u, 7u, 1u, 16u, 13u, 13u, 4u, 4u, 6u, 6u, 
 	16u, 16u, 4u, 7u, 6u, 6u, 16u, 16u, 4u, 7u, 6u, 6u, 16u, 16u, 4u, 7u, 
-	6u, 6u, 16u, 16u, 1u, 31u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 18u, 8u, 18u, 
-	5u, 10u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 18u, 3u, 18u, 8u, 18u, 
-	3u, 10u, 8u, 10u, 3u, 18u, 3u, 18u, 3u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 
-	3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 
-	6u, 18u, 3u, 18u, 1u, 18u, 4u, 31u, 4u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 3u, 31u, 3u, 31u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 18u, 8u, 18u, 
-	5u, 10u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 18u, 3u, 18u, 8u, 18u, 
-	3u, 10u, 8u, 10u, 3u, 18u, 3u, 18u, 3u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 
-	3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 
-	6u, 18u, 3u, 18u, 1u, 18u, 4u, 31u, 4u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	4u, 14u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 
-	4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 
-	4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 18u, 8u, 18u, 5u, 10u, 
-	9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 18u, 3u, 18u, 8u, 18u, 3u, 10u, 
-	8u, 10u, 3u, 18u, 3u, 18u, 3u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 
-	4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 6u, 18u, 
-	3u, 18u, 1u, 18u, 4u, 31u, 4u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	4u, 14u, 3u, 31u, 4u, 14u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 1u, 18u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 18u, 8u, 18u, 
-	5u, 10u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 18u, 3u, 18u, 8u, 18u, 
-	3u, 10u, 8u, 10u, 3u, 18u, 3u, 18u, 3u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 
-	3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 
-	6u, 18u, 3u, 18u, 1u, 18u, 4u, 31u, 4u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 1u, 18u, 3u, 31u, 3u, 31u, 1u, 18u, 1u, 18u, 1u, 18u, 1u, 18u, 
-	1u, 18u, 3u, 31u, 1u, 31u, 3u, 31u, 1u, 31u, 4u, 18u, 1u, 18u, 3u, 31u, 
-	3u, 31u, 4u, 31u, 5u, 10u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 10u, 
-	8u, 10u, 3u, 31u, 3u, 31u, 1u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 
-	4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 5u, 18u, 3u, 18u, 4u, 18u, 8u, 18u, 
-	3u, 18u, 3u, 18u, 8u, 18u, 3u, 18u, 3u, 18u, 1u, 18u, 3u, 10u, 8u, 10u, 
-	5u, 10u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 0
+	6u, 6u, 16u, 16u, 1u, 31u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 14u, 8u, 14u, 
+	5u, 10u, 9u, 10u, 9u, 9u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 13u, 
+	3u, 10u, 8u, 10u, 3u, 10u, 3u, 13u, 3u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 
+	3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 
+	6u, 14u, 3u, 14u, 1u, 16u, 4u, 31u, 4u, 14u, 3u, 31u, 3u, 31u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 3u, 31u, 3u, 31u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 14u, 8u, 14u, 
+	5u, 10u, 9u, 10u, 9u, 9u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 13u, 
+	3u, 10u, 8u, 10u, 3u, 10u, 3u, 13u, 3u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 
+	3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 
+	6u, 14u, 3u, 14u, 1u, 16u, 4u, 31u, 4u, 14u, 3u, 31u, 3u, 31u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	4u, 14u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 
+	4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 
+	4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 14u, 8u, 14u, 5u, 10u, 
+	9u, 10u, 9u, 9u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 13u, 3u, 10u, 
+	8u, 10u, 3u, 10u, 3u, 13u, 3u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 
+	4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 6u, 14u, 
+	3u, 14u, 1u, 16u, 4u, 31u, 4u, 14u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	4u, 14u, 3u, 31u, 4u, 14u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 1u, 16u, 3u, 31u, 3u, 31u, 4u, 31u, 5u, 14u, 8u, 14u, 
+	5u, 10u, 9u, 10u, 9u, 9u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 3u, 13u, 
+	3u, 10u, 8u, 10u, 3u, 10u, 3u, 13u, 3u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 
+	3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 
+	6u, 14u, 3u, 14u, 1u, 16u, 4u, 31u, 4u, 14u, 3u, 31u, 3u, 31u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 1u, 16u, 3u, 31u, 3u, 31u, 1u, 16u, 1u, 16u, 1u, 16u, 1u, 16u, 
+	1u, 16u, 3u, 31u, 1u, 31u, 3u, 31u, 1u, 31u, 4u, 14u, 1u, 16u, 3u, 31u, 
+	3u, 31u, 4u, 31u, 5u, 10u, 9u, 10u, 9u, 9u, 9u, 10u, 9u, 10u, 9u, 9u, 
+	5u, 10u, 3u, 31u, 3u, 31u, 1u, 16u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 
+	4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 5u, 14u, 3u, 14u, 4u, 14u, 8u, 14u, 
+	3u, 13u, 3u, 10u, 8u, 10u, 3u, 10u, 3u, 13u, 1u, 16u, 3u, 10u, 8u, 10u, 
+	5u, 10u, 9u, 10u, 9u, 9u, 9u, 10u, 9u, 10u, 9u, 9u, 5u, 10u, 0
 };
 
 static const char _indic_syllable_machine_key_spans[] = {
@@ -125,52 +125,52 @@ static const char _indic_syllable_machine_key_spans[] = {
 	11, 3, 3, 3, 3, 1, 3, 3, 
 	1, 3, 3, 1, 16, 1, 1, 1, 
 	1, 4, 1, 1, 4, 1, 1, 4, 
-	1, 1, 31, 29, 29, 28, 18, 29, 
-	29, 28, 18, 29, 29, 28, 18, 29, 
-	29, 28, 18, 29, 29, 28, 14, 11, 
-	6, 2, 2, 1, 6, 16, 16, 11, 
-	8, 3, 16, 16, 16, 16, 15, 14, 
-	16, 15, 14, 16, 15, 14, 16, 15, 
-	13, 16, 18, 28, 15, 29, 29, 18, 
-	18, 18, 18, 18, 29, 29, 18, 18, 
-	18, 18, 18, 29, 29, 18, 18, 18, 
-	18, 18, 29, 29, 18, 18, 18, 18, 
-	18, 29, 29, 29, 29, 28, 18, 29, 
-	29, 28, 18, 29, 29, 28, 18, 29, 
-	29, 28, 18, 29, 29, 28, 14, 11, 
-	6, 2, 2, 1, 6, 16, 16, 11, 
-	8, 3, 16, 16, 16, 16, 15, 14, 
-	16, 15, 14, 16, 15, 14, 16, 15, 
-	13, 16, 18, 28, 15, 29, 29, 18, 
-	18, 18, 18, 18, 29, 29, 18, 18, 
-	18, 18, 18, 29, 29, 18, 18, 18, 
-	18, 18, 29, 29, 18, 18, 18, 18, 
-	11, 18, 29, 29, 28, 18, 29, 29, 
-	28, 18, 29, 29, 28, 18, 29, 29, 
-	28, 18, 29, 29, 28, 14, 11, 6, 
-	2, 2, 1, 6, 16, 16, 11, 8, 
-	3, 16, 16, 16, 16, 15, 14, 16, 
-	15, 14, 16, 15, 14, 16, 15, 13, 
-	16, 18, 28, 15, 29, 29, 18, 18, 
-	18, 18, 18, 29, 29, 18, 18, 18, 
-	18, 18, 29, 29, 18, 18, 18, 18, 
-	18, 29, 29, 18, 18, 18, 18, 18, 
-	11, 29, 11, 29, 29, 28, 18, 29, 
-	29, 28, 18, 29, 29, 28, 18, 29, 
-	29, 28, 18, 29, 29, 28, 14, 11, 
-	6, 2, 2, 1, 6, 16, 16, 11, 
-	8, 3, 16, 16, 16, 16, 15, 14, 
-	16, 15, 14, 16, 15, 14, 16, 15, 
-	13, 16, 18, 28, 15, 29, 29, 18, 
-	18, 18, 18, 18, 29, 29, 18, 18, 
-	18, 18, 18, 29, 29, 18, 18, 18, 
-	18, 18, 29, 29, 18, 18, 18, 18, 
-	18, 29, 31, 29, 31, 15, 18, 29, 
-	29, 28, 6, 2, 2, 1, 6, 8, 
-	3, 29, 29, 18, 16, 15, 14, 16, 
-	15, 14, 16, 15, 14, 16, 15, 11, 
-	16, 16, 11, 16, 16, 18, 8, 3, 
-	6, 2, 2, 1, 6
+	1, 1, 31, 29, 29, 28, 16, 29, 
+	29, 28, 16, 29, 29, 28, 16, 29, 
+	29, 28, 16, 29, 29, 28, 10, 7, 
+	6, 2, 1, 2, 2, 1, 6, 11, 
+	8, 3, 8, 11, 12, 12, 11, 10, 
+	12, 11, 10, 12, 11, 10, 12, 11, 
+	9, 12, 16, 28, 11, 29, 29, 16, 
+	16, 16, 16, 16, 29, 29, 16, 16, 
+	16, 16, 16, 29, 29, 16, 16, 16, 
+	16, 16, 29, 29, 16, 16, 16, 16, 
+	16, 29, 29, 29, 29, 28, 16, 29, 
+	29, 28, 16, 29, 29, 28, 16, 29, 
+	29, 28, 16, 29, 29, 28, 10, 7, 
+	6, 2, 1, 2, 2, 1, 6, 11, 
+	8, 3, 8, 11, 12, 12, 11, 10, 
+	12, 11, 10, 12, 11, 10, 12, 11, 
+	9, 12, 16, 28, 11, 29, 29, 16, 
+	16, 16, 16, 16, 29, 29, 16, 16, 
+	16, 16, 16, 29, 29, 16, 16, 16, 
+	16, 16, 29, 29, 16, 16, 16, 16, 
+	11, 16, 29, 29, 28, 16, 29, 29, 
+	28, 16, 29, 29, 28, 16, 29, 29, 
+	28, 16, 29, 29, 28, 10, 7, 6, 
+	2, 1, 2, 2, 1, 6, 11, 8, 
+	3, 8, 11, 12, 12, 11, 10, 12, 
+	11, 10, 12, 11, 10, 12, 11, 9, 
+	12, 16, 28, 11, 29, 29, 16, 16, 
+	16, 16, 16, 29, 29, 16, 16, 16, 
+	16, 16, 29, 29, 16, 16, 16, 16, 
+	16, 29, 29, 16, 16, 16, 16, 16, 
+	11, 29, 11, 29, 29, 28, 16, 29, 
+	29, 28, 16, 29, 29, 28, 16, 29, 
+	29, 28, 16, 29, 29, 28, 10, 7, 
+	6, 2, 1, 2, 2, 1, 6, 11, 
+	8, 3, 8, 11, 12, 12, 11, 10, 
+	12, 11, 10, 12, 11, 10, 12, 11, 
+	9, 12, 16, 28, 11, 29, 29, 16, 
+	16, 16, 16, 16, 29, 29, 16, 16, 
+	16, 16, 16, 29, 29, 16, 16, 16, 
+	16, 16, 29, 29, 16, 16, 16, 16, 
+	16, 29, 31, 29, 31, 11, 16, 29, 
+	29, 28, 6, 2, 1, 2, 2, 1, 
+	6, 29, 29, 16, 12, 11, 10, 12, 
+	11, 10, 12, 11, 10, 12, 11, 7, 
+	11, 8, 3, 8, 11, 16, 8, 3, 
+	6, 2, 1, 2, 2, 1, 6
 };
 
 static const short _indic_syllable_machine_index_offsets[] = {
@@ -195,52 +195,52 @@ static const short _indic_syllable_machine_index_offsets[] = {
 	848, 860, 864, 868, 872, 876, 878, 882, 
 	886, 888, 892, 896, 898, 915, 917, 919, 
 	921, 923, 928, 930, 932, 937, 939, 941, 
-	946, 948, 950, 982, 1012, 1042, 1071, 1090, 
-	1120, 1150, 1179, 1198, 1228, 1258, 1287, 1306, 
-	1336, 1366, 1395, 1414, 1444, 1474, 1503, 1518, 
-	1530, 1537, 1540, 1543, 1545, 1552, 1569, 1586, 
-	1598, 1607, 1611, 1628, 1645, 1662, 1679, 1695, 
-	1710, 1727, 1743, 1758, 1775, 1791, 1806, 1823, 
-	1839, 1853, 1870, 1889, 1918, 1934, 1964, 1994, 
-	2013, 2032, 2051, 2070, 2089, 2119, 2149, 2168, 
-	2187, 2206, 2225, 2244, 2274, 2304, 2323, 2342, 
-	2361, 2380, 2399, 2429, 2459, 2478, 2497, 2516, 
-	2535, 2554, 2584, 2614, 2644, 2674, 2703, 2722, 
-	2752, 2782, 2811, 2830, 2860, 2890, 2919, 2938, 
-	2968, 2998, 3027, 3046, 3076, 3106, 3135, 3150, 
-	3162, 3169, 3172, 3175, 3177, 3184, 3201, 3218, 
-	3230, 3239, 3243, 3260, 3277, 3294, 3311, 3327, 
-	3342, 3359, 3375, 3390, 3407, 3423, 3438, 3455, 
-	3471, 3485, 3502, 3521, 3550, 3566, 3596, 3626, 
-	3645, 3664, 3683, 3702, 3721, 3751, 3781, 3800, 
-	3819, 3838, 3857, 3876, 3906, 3936, 3955, 3974, 
-	3993, 4012, 4031, 4061, 4091, 4110, 4129, 4148, 
-	4167, 4179, 4198, 4228, 4258, 4287, 4306, 4336, 
-	4366, 4395, 4414, 4444, 4474, 4503, 4522, 4552, 
-	4582, 4611, 4630, 4660, 4690, 4719, 4734, 4746, 
-	4753, 4756, 4759, 4761, 4768, 4785, 4802, 4814, 
-	4823, 4827, 4844, 4861, 4878, 4895, 4911, 4926, 
-	4943, 4959, 4974, 4991, 5007, 5022, 5039, 5055, 
-	5069, 5086, 5105, 5134, 5150, 5180, 5210, 5229, 
-	5248, 5267, 5286, 5305, 5335, 5365, 5384, 5403, 
-	5422, 5441, 5460, 5490, 5520, 5539, 5558, 5577, 
-	5596, 5615, 5645, 5675, 5694, 5713, 5732, 5751, 
-	5770, 5782, 5812, 5824, 5854, 5884, 5913, 5932, 
-	5962, 5992, 6021, 6040, 6070, 6100, 6129, 6148, 
-	6178, 6208, 6237, 6256, 6286, 6316, 6345, 6360, 
-	6372, 6379, 6382, 6385, 6387, 6394, 6411, 6428, 
-	6440, 6449, 6453, 6470, 6487, 6504, 6521, 6537, 
-	6552, 6569, 6585, 6600, 6617, 6633, 6648, 6665, 
-	6681, 6695, 6712, 6731, 6760, 6776, 6806, 6836, 
-	6855, 6874, 6893, 6912, 6931, 6961, 6991, 7010, 
-	7029, 7048, 7067, 7086, 7116, 7146, 7165, 7184, 
-	7203, 7222, 7241, 7271, 7301, 7320, 7339, 7358, 
-	7377, 7396, 7426, 7458, 7488, 7520, 7536, 7555, 
-	7585, 7615, 7644, 7651, 7654, 7657, 7659, 7666, 
-	7675, 7679, 7709, 7739, 7758, 7775, 7791, 7806, 
-	7823, 7839, 7854, 7871, 7887, 7902, 7919, 7935, 
-	7947, 7964, 7981, 7993, 8010, 8027, 8046, 8055, 
-	8059, 8066, 8069, 8072, 8074
+	946, 948, 950, 982, 1012, 1042, 1071, 1088, 
+	1118, 1148, 1177, 1194, 1224, 1254, 1283, 1300, 
+	1330, 1360, 1389, 1406, 1436, 1466, 1495, 1506, 
+	1514, 1521, 1524, 1526, 1529, 1532, 1534, 1541, 
+	1553, 1562, 1566, 1575, 1587, 1600, 1613, 1625, 
+	1636, 1649, 1661, 1672, 1685, 1697, 1708, 1721, 
+	1733, 1743, 1756, 1773, 1802, 1814, 1844, 1874, 
+	1891, 1908, 1925, 1942, 1959, 1989, 2019, 2036, 
+	2053, 2070, 2087, 2104, 2134, 2164, 2181, 2198, 
+	2215, 2232, 2249, 2279, 2309, 2326, 2343, 2360, 
+	2377, 2394, 2424, 2454, 2484, 2514, 2543, 2560, 
+	2590, 2620, 2649, 2666, 2696, 2726, 2755, 2772, 
+	2802, 2832, 2861, 2878, 2908, 2938, 2967, 2978, 
+	2986, 2993, 2996, 2998, 3001, 3004, 3006, 3013, 
+	3025, 3034, 3038, 3047, 3059, 3072, 3085, 3097, 
+	3108, 3121, 3133, 3144, 3157, 3169, 3180, 3193, 
+	3205, 3215, 3228, 3245, 3274, 3286, 3316, 3346, 
+	3363, 3380, 3397, 3414, 3431, 3461, 3491, 3508, 
+	3525, 3542, 3559, 3576, 3606, 3636, 3653, 3670, 
+	3687, 3704, 3721, 3751, 3781, 3798, 3815, 3832, 
+	3849, 3861, 3878, 3908, 3938, 3967, 3984, 4014, 
+	4044, 4073, 4090, 4120, 4150, 4179, 4196, 4226, 
+	4256, 4285, 4302, 4332, 4362, 4391, 4402, 4410, 
+	4417, 4420, 4422, 4425, 4428, 4430, 4437, 4449, 
+	4458, 4462, 4471, 4483, 4496, 4509, 4521, 4532, 
+	4545, 4557, 4568, 4581, 4593, 4604, 4617, 4629, 
+	4639, 4652, 4669, 4698, 4710, 4740, 4770, 4787, 
+	4804, 4821, 4838, 4855, 4885, 4915, 4932, 4949, 
+	4966, 4983, 5000, 5030, 5060, 5077, 5094, 5111, 
+	5128, 5145, 5175, 5205, 5222, 5239, 5256, 5273, 
+	5290, 5302, 5332, 5344, 5374, 5404, 5433, 5450, 
+	5480, 5510, 5539, 5556, 5586, 5616, 5645, 5662, 
+	5692, 5722, 5751, 5768, 5798, 5828, 5857, 5868, 
+	5876, 5883, 5886, 5888, 5891, 5894, 5896, 5903, 
+	5915, 5924, 5928, 5937, 5949, 5962, 5975, 5987, 
+	5998, 6011, 6023, 6034, 6047, 6059, 6070, 6083, 
+	6095, 6105, 6118, 6135, 6164, 6176, 6206, 6236, 
+	6253, 6270, 6287, 6304, 6321, 6351, 6381, 6398, 
+	6415, 6432, 6449, 6466, 6496, 6526, 6543, 6560, 
+	6577, 6594, 6611, 6641, 6671, 6688, 6705, 6722, 
+	6739, 6756, 6786, 6818, 6848, 6880, 6892, 6909, 
+	6939, 6969, 6998, 7005, 7008, 7010, 7013, 7016, 
+	7018, 7025, 7055, 7085, 7102, 7115, 7127, 7138, 
+	7151, 7163, 7174, 7187, 7199, 7210, 7223, 7235, 
+	7243, 7255, 7264, 7268, 7277, 7289, 7306, 7315, 
+	7319, 7326, 7329, 7331, 7334, 7337, 7339
 };
 
 static const short _indic_syllable_machine_indicies[] = {
@@ -368,911 +368,819 @@ static const short _indic_syllable_machine_indicies[] = {
 	180, 180, 180, 180, 180, 180, 180, 180, 
 	180, 180, 180, 180, 196, 180, 198, 199, 
 	200, 201, 5, 202, 203, 204, 197, 197, 
-	37, 205, 197, 197, 206, 207, 197, 197, 
+	37, 205, 197, 197, 206, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 208, 197, 209, 199, 210, 210, 
+	197, 197, 207, 197, 208, 199, 209, 209, 
 	5, 202, 203, 204, 197, 197, 197, 205, 
-	197, 197, 206, 207, 197, 197, 197, 197, 
+	197, 197, 206, 197, 197, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	208, 197, 199, 210, 210, 5, 202, 203, 
+	207, 197, 199, 209, 209, 5, 202, 203, 
 	204, 197, 197, 197, 205, 197, 197, 206, 
-	207, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 208, 197, 211, 
-	197, 197, 197, 18, 212, 197, 202, 203, 
-	204, 197, 197, 197, 213, 197, 211, 197, 
-	207, 197, 214, 215, 216, 217, 5, 202, 
-	203, 204, 197, 197, 35, 218, 197, 197, 
-	206, 207, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 197, 208, 197, 
-	219, 215, 220, 220, 5, 202, 203, 204, 
-	197, 197, 197, 218, 197, 197, 206, 207, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 208, 197, 215, 220, 
-	220, 5, 202, 203, 204, 197, 197, 197, 
-	218, 197, 197, 206, 207, 197, 197, 197, 
+	197, 197, 197, 197, 197, 207, 197, 210, 
+	197, 197, 197, 18, 211, 197, 202, 203, 
+	204, 197, 197, 197, 212, 197, 210, 197, 
+	213, 214, 215, 216, 5, 202, 203, 204, 
+	197, 197, 35, 217, 197, 197, 206, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 208, 197, 221, 197, 197, 197, 18, 
-	222, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 221, 197, 207, 197, 223, 224, 
-	225, 226, 5, 202, 203, 204, 197, 197, 
-	33, 227, 197, 197, 206, 207, 197, 197, 
+	197, 197, 197, 197, 207, 197, 218, 214, 
+	219, 219, 5, 202, 203, 204, 197, 197, 
+	197, 217, 197, 197, 206, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 208, 197, 228, 224, 229, 229, 
-	5, 202, 203, 204, 197, 197, 197, 227, 
-	197, 197, 206, 207, 197, 197, 197, 197, 
+	197, 197, 207, 197, 214, 219, 219, 5, 
+	202, 203, 204, 197, 197, 197, 217, 197, 
+	197, 206, 197, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 197, 207, 
+	197, 220, 197, 197, 197, 18, 221, 197, 
+	202, 203, 204, 197, 197, 197, 212, 197, 
+	220, 197, 222, 223, 224, 225, 5, 202, 
+	203, 204, 197, 197, 33, 226, 197, 197, 
+	206, 197, 197, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 207, 197, 
+	227, 223, 228, 228, 5, 202, 203, 204, 
+	197, 197, 197, 226, 197, 197, 206, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	208, 197, 224, 229, 229, 5, 202, 203, 
-	204, 197, 197, 197, 227, 197, 197, 206, 
-	207, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 208, 197, 230, 
-	197, 197, 197, 18, 231, 197, 202, 203, 
-	204, 197, 197, 197, 213, 197, 230, 197, 
-	207, 197, 232, 233, 234, 235, 5, 202, 
-	203, 204, 197, 197, 31, 236, 197, 197, 
-	206, 207, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 197, 208, 197, 
-	237, 233, 238, 238, 5, 202, 203, 204, 
-	197, 197, 197, 236, 197, 197, 206, 207, 
+	197, 197, 197, 197, 207, 197, 223, 228, 
+	228, 5, 202, 203, 204, 197, 197, 197, 
+	226, 197, 197, 206, 197, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 208, 197, 233, 238, 
-	238, 5, 202, 203, 204, 197, 197, 197, 
-	236, 197, 197, 206, 207, 197, 197, 197, 
+	197, 207, 197, 229, 197, 197, 197, 18, 
+	230, 197, 202, 203, 204, 197, 197, 197, 
+	212, 197, 229, 197, 231, 232, 233, 234, 
+	5, 202, 203, 204, 197, 197, 31, 235, 
+	197, 197, 206, 197, 197, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 208, 197, 239, 197, 197, 197, 18, 
-	240, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 239, 197, 207, 197, 241, 242, 
-	243, 244, 5, 202, 203, 204, 197, 197, 
-	29, 245, 197, 197, 206, 207, 197, 197, 
+	207, 197, 236, 232, 237, 237, 5, 202, 
+	203, 204, 197, 197, 197, 235, 197, 197, 
+	206, 197, 197, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 207, 197, 
+	232, 237, 237, 5, 202, 203, 204, 197, 
+	197, 197, 235, 197, 197, 206, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 208, 197, 246, 242, 247, 247, 
-	5, 202, 203, 204, 197, 197, 197, 245, 
-	197, 197, 206, 207, 197, 197, 197, 197, 
+	197, 197, 197, 207, 197, 238, 197, 197, 
+	197, 18, 239, 197, 202, 203, 204, 197, 
+	197, 197, 212, 197, 238, 197, 240, 241, 
+	242, 243, 5, 202, 203, 204, 197, 197, 
+	29, 244, 197, 197, 206, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	208, 197, 242, 247, 247, 5, 202, 203, 
-	204, 197, 197, 197, 245, 197, 197, 206, 
-	207, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 208, 197, 18, 
-	248, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 197, 197, 207, 197, 202, 203, 
-	204, 197, 197, 197, 213, 197, 197, 197, 
-	207, 197, 249, 197, 197, 250, 203, 204, 
-	197, 203, 204, 197, 203, 251, 197, 203, 
-	197, 249, 197, 197, 197, 203, 204, 197, 
-	252, 197, 253, 254, 197, 202, 203, 204, 
-	197, 197, 3, 197, 197, 197, 197, 207, 
+	197, 197, 207, 197, 245, 241, 246, 246, 
+	5, 202, 203, 204, 197, 197, 197, 244, 
+	197, 197, 206, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 197, 197, 
+	207, 197, 241, 246, 246, 5, 202, 203, 
+	204, 197, 197, 197, 244, 197, 197, 206, 
+	197, 197, 197, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 207, 197, 18, 
+	247, 197, 202, 203, 204, 197, 197, 197, 
+	212, 197, 202, 203, 204, 197, 197, 197, 
+	212, 197, 248, 197, 197, 249, 203, 204, 
+	197, 203, 204, 197, 250, 197, 203, 251, 
+	197, 203, 252, 197, 203, 197, 248, 197, 
+	197, 197, 203, 204, 197, 253, 197, 254, 
+	255, 197, 202, 203, 204, 197, 197, 3, 
 	197, 2, 197, 197, 197, 197, 202, 203, 
-	204, 197, 197, 197, 197, 197, 197, 197, 
-	207, 197, 202, 203, 204, 197, 197, 197, 
-	197, 197, 197, 197, 207, 197, 255, 197, 
-	197, 197, 197, 202, 203, 204, 197, 202, 
-	203, 204, 197, 252, 197, 197, 197, 197, 
-	202, 203, 204, 197, 197, 197, 197, 197, 
-	197, 197, 207, 197, 252, 197, 253, 197, 
-	197, 202, 203, 204, 197, 197, 3, 197, 
-	197, 197, 197, 207, 197, 18, 197, 256, 
-	256, 5, 202, 203, 204, 197, 197, 197, 
-	213, 197, 197, 197, 207, 197, 257, 27, 
-	258, 259, 8, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 27, 
-	258, 259, 8, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 258, 
-	258, 8, 202, 203, 204, 197, 197, 197, 
-	213, 197, 197, 197, 207, 197, 260, 24, 
-	261, 262, 11, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 24, 
-	261, 262, 11, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 261, 
-	261, 11, 202, 203, 204, 197, 197, 197, 
-	213, 197, 197, 197, 207, 197, 263, 21, 
-	264, 265, 14, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 21, 
-	264, 265, 14, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 264, 
-	264, 14, 202, 203, 204, 197, 197, 197, 
-	213, 197, 197, 197, 207, 197, 266, 18, 
-	197, 267, 197, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 18, 
-	197, 267, 197, 202, 203, 204, 197, 197, 
-	197, 213, 197, 197, 197, 207, 197, 268, 
-	197, 202, 203, 204, 197, 197, 197, 213, 
-	197, 197, 197, 207, 197, 18, 197, 197, 
-	197, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 197, 197, 207, 197, 1, 2, 
-	197, 197, 18, 248, 197, 202, 203, 204, 
-	197, 197, 197, 213, 197, 1, 197, 207, 
-	197, 242, 247, 247, 5, 202, 203, 204, 
-	197, 197, 197, 245, 197, 197, 197, 207, 
+	204, 197, 202, 203, 204, 197, 253, 197, 
+	197, 197, 197, 202, 203, 204, 197, 253, 
+	197, 254, 197, 197, 202, 203, 204, 197, 
+	197, 3, 197, 18, 197, 256, 256, 5, 
+	202, 203, 204, 197, 197, 197, 212, 197, 
+	257, 27, 258, 259, 8, 202, 203, 204, 
+	197, 197, 197, 212, 197, 27, 258, 259, 
+	8, 202, 203, 204, 197, 197, 197, 212, 
+	197, 258, 258, 8, 202, 203, 204, 197, 
+	197, 197, 212, 197, 260, 24, 261, 262, 
+	11, 202, 203, 204, 197, 197, 197, 212, 
+	197, 24, 261, 262, 11, 202, 203, 204, 
+	197, 197, 197, 212, 197, 261, 261, 11, 
+	202, 203, 204, 197, 197, 197, 212, 197, 
+	263, 21, 264, 265, 14, 202, 203, 204, 
+	197, 197, 197, 212, 197, 21, 264, 265, 
+	14, 202, 203, 204, 197, 197, 197, 212, 
+	197, 264, 264, 14, 202, 203, 204, 197, 
+	197, 197, 212, 197, 266, 18, 197, 267, 
+	197, 202, 203, 204, 197, 197, 197, 212, 
+	197, 18, 197, 267, 197, 202, 203, 204, 
+	197, 197, 197, 212, 197, 268, 197, 202, 
+	203, 204, 197, 197, 197, 212, 197, 18, 
+	197, 197, 197, 197, 202, 203, 204, 197, 
+	197, 197, 212, 197, 1, 2, 197, 197, 
+	18, 247, 197, 202, 203, 204, 197, 197, 
+	197, 212, 197, 1, 197, 241, 246, 246, 
+	5, 202, 203, 204, 197, 197, 197, 244, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 208, 197, 242, 247, 
-	247, 5, 202, 203, 204, 197, 197, 197, 
-	245, 197, 197, 197, 207, 197, 241, 242, 
-	247, 247, 5, 202, 203, 204, 197, 197, 
-	197, 245, 197, 197, 206, 207, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 208, 197, 241, 242, 243, 247, 
-	5, 202, 203, 204, 197, 197, 29, 245, 
-	197, 197, 206, 207, 197, 197, 197, 197, 
+	207, 197, 241, 246, 246, 5, 202, 203, 
+	204, 197, 197, 197, 244, 197, 240, 241, 
+	246, 246, 5, 202, 203, 204, 197, 197, 
+	197, 244, 197, 197, 206, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	208, 197, 239, 197, 269, 197, 256, 256, 
-	5, 202, 203, 204, 197, 197, 197, 213, 
-	197, 239, 197, 207, 197, 239, 197, 197, 
-	197, 197, 197, 197, 202, 203, 204, 197, 
-	197, 197, 213, 197, 239, 197, 207, 197, 
-	239, 197, 197, 197, 197, 270, 197, 202, 
-	203, 204, 197, 197, 197, 213, 197, 239, 
-	197, 207, 197, 239, 197, 269, 197, 197, 
+	197, 197, 207, 197, 240, 241, 242, 246, 
+	5, 202, 203, 204, 197, 197, 29, 244, 
+	197, 197, 206, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 197, 197, 
+	207, 197, 238, 197, 269, 197, 256, 256, 
+	5, 202, 203, 204, 197, 197, 197, 212, 
+	197, 238, 197, 238, 197, 197, 197, 197, 
 	197, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 239, 197, 207, 197, 239, 2, 
-	197, 197, 18, 240, 197, 202, 203, 204, 
-	197, 197, 197, 213, 197, 239, 197, 207, 
-	197, 232, 233, 238, 238, 5, 202, 203, 
-	204, 197, 197, 197, 236, 197, 197, 206, 
-	207, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 208, 197, 232, 
-	233, 234, 238, 5, 202, 203, 204, 197, 
-	197, 31, 236, 197, 197, 206, 207, 197, 
+	212, 197, 238, 197, 238, 197, 197, 197, 
+	197, 270, 197, 202, 203, 204, 197, 197, 
+	197, 212, 197, 238, 197, 238, 197, 269, 
+	197, 197, 197, 197, 202, 203, 204, 197, 
+	197, 197, 212, 197, 238, 197, 238, 2, 
+	197, 197, 18, 239, 197, 202, 203, 204, 
+	197, 197, 197, 212, 197, 238, 197, 231, 
+	232, 237, 237, 5, 202, 203, 204, 197, 
+	197, 197, 235, 197, 197, 206, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 208, 197, 230, 197, 271, 
-	197, 256, 256, 5, 202, 203, 204, 197, 
-	197, 197, 213, 197, 230, 197, 207, 197, 
-	230, 197, 197, 197, 197, 197, 197, 202, 
-	203, 204, 197, 197, 197, 213, 197, 230, 
-	197, 207, 197, 230, 197, 197, 197, 197, 
-	272, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 230, 197, 207, 197, 230, 197, 
+	197, 197, 197, 207, 197, 231, 232, 233, 
+	237, 5, 202, 203, 204, 197, 197, 31, 
+	235, 197, 197, 206, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 197, 197, 
+	197, 207, 197, 229, 197, 271, 197, 256, 
+	256, 5, 202, 203, 204, 197, 197, 197, 
+	212, 197, 229, 197, 229, 197, 197, 197, 
+	197, 197, 197, 202, 203, 204, 197, 197, 
+	197, 212, 197, 229, 197, 229, 197, 197, 
+	197, 197, 272, 197, 202, 203, 204, 197, 
+	197, 197, 212, 197, 229, 197, 229, 197, 
 	271, 197, 197, 197, 197, 202, 203, 204, 
-	197, 197, 197, 213, 197, 230, 197, 207, 
-	197, 230, 2, 197, 197, 18, 231, 197, 
-	202, 203, 204, 197, 197, 197, 213, 197, 
-	230, 197, 207, 197, 223, 224, 229, 229, 
-	5, 202, 203, 204, 197, 197, 197, 227, 
-	197, 197, 206, 207, 197, 197, 197, 197, 
+	197, 197, 197, 212, 197, 229, 197, 229, 
+	2, 197, 197, 18, 230, 197, 202, 203, 
+	204, 197, 197, 197, 212, 197, 229, 197, 
+	222, 223, 228, 228, 5, 202, 203, 204, 
+	197, 197, 197, 226, 197, 197, 206, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	208, 197, 223, 224, 225, 229, 5, 202, 
-	203, 204, 197, 197, 33, 227, 197, 197, 
-	206, 207, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 197, 208, 197, 
-	221, 197, 273, 197, 256, 256, 5, 202, 
-	203, 204, 197, 197, 197, 213, 197, 221, 
-	197, 207, 197, 221, 197, 197, 197, 197, 
-	197, 197, 202, 203, 204, 197, 197, 197, 
-	213, 197, 221, 197, 207, 197, 221, 197, 
+	197, 197, 197, 197, 207, 197, 222, 223, 
+	224, 228, 5, 202, 203, 204, 197, 197, 
+	33, 226, 197, 197, 206, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 197, 197, 
+	197, 197, 207, 197, 220, 197, 273, 197, 
+	256, 256, 5, 202, 203, 204, 197, 197, 
+	197, 212, 197, 220, 197, 220, 197, 197, 
+	197, 197, 197, 197, 202, 203, 204, 197, 
+	197, 197, 212, 197, 220, 197, 220, 197, 
 	197, 197, 197, 274, 197, 202, 203, 204, 
-	197, 197, 197, 213, 197, 221, 197, 207, 
-	197, 221, 197, 273, 197, 197, 197, 197, 
-	202, 203, 204, 197, 197, 197, 213, 197, 
-	221, 197, 207, 197, 221, 2, 197, 197, 
-	18, 222, 197, 202, 203, 204, 197, 197, 
-	197, 213, 197, 221, 197, 207, 197, 214, 
-	215, 220, 220, 5, 202, 203, 204, 197, 
-	197, 197, 218, 197, 197, 206, 207, 197, 
+	197, 197, 197, 212, 197, 220, 197, 220, 
+	197, 273, 197, 197, 197, 197, 202, 203, 
+	204, 197, 197, 197, 212, 197, 220, 197, 
+	220, 2, 197, 197, 18, 221, 197, 202, 
+	203, 204, 197, 197, 197, 212, 197, 220, 
+	197, 213, 214, 219, 219, 5, 202, 203, 
+	204, 197, 197, 197, 217, 197, 197, 206, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 208, 197, 214, 215, 216, 
-	220, 5, 202, 203, 204, 197, 197, 35, 
-	218, 197, 197, 206, 207, 197, 197, 197, 
+	197, 197, 197, 197, 197, 207, 197, 213, 
+	214, 215, 219, 5, 202, 203, 204, 197, 
+	197, 35, 217, 197, 197, 206, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 208, 197, 211, 197, 275, 197, 256, 
-	256, 5, 202, 203, 204, 197, 197, 197, 
-	213, 197, 211, 197, 207, 197, 211, 197, 
+	197, 197, 197, 207, 197, 210, 197, 275, 
+	197, 256, 256, 5, 202, 203, 204, 197, 
+	197, 197, 212, 197, 210, 197, 210, 197, 
 	197, 197, 197, 197, 197, 202, 203, 204, 
-	197, 197, 197, 213, 197, 211, 197, 207, 
-	197, 211, 197, 197, 197, 197, 276, 197, 
-	202, 203, 204, 197, 197, 197, 213, 197, 
-	211, 197, 207, 197, 211, 197, 275, 197, 
-	197, 197, 197, 202, 203, 204, 197, 197, 
-	197, 213, 197, 211, 197, 207, 197, 211, 
-	2, 197, 197, 18, 212, 197, 202, 203, 
-	204, 197, 197, 197, 213, 197, 211, 197, 
-	207, 197, 198, 199, 210, 210, 5, 202, 
+	197, 197, 197, 212, 197, 210, 197, 210, 
+	197, 197, 197, 197, 276, 197, 202, 203, 
+	204, 197, 197, 197, 212, 197, 210, 197, 
+	210, 197, 275, 197, 197, 197, 197, 202, 
+	203, 204, 197, 197, 197, 212, 197, 210, 
+	197, 210, 2, 197, 197, 18, 211, 197, 
+	202, 203, 204, 197, 197, 197, 212, 197, 
+	210, 197, 198, 199, 209, 209, 5, 202, 
 	203, 204, 197, 197, 197, 205, 197, 197, 
-	206, 207, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 197, 208, 197, 
-	198, 199, 200, 210, 5, 202, 203, 204, 
-	197, 197, 37, 205, 197, 197, 206, 207, 
+	206, 197, 197, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 207, 197, 
+	198, 199, 200, 209, 5, 202, 203, 204, 
+	197, 197, 37, 205, 197, 197, 206, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 208, 197, 278, 279, 
+	197, 197, 197, 197, 207, 197, 278, 279, 
 	280, 281, 43, 282, 283, 284, 277, 277, 
-	75, 285, 277, 277, 286, 287, 277, 277, 
+	75, 285, 277, 277, 286, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 288, 277, 289, 279, 290, 281, 
+	277, 277, 287, 277, 288, 279, 289, 281, 
 	43, 282, 283, 284, 277, 277, 277, 285, 
-	277, 277, 286, 287, 277, 277, 277, 277, 
+	277, 277, 286, 277, 277, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	288, 277, 279, 290, 281, 43, 282, 283, 
+	287, 277, 279, 289, 281, 43, 282, 283, 
 	284, 277, 277, 277, 285, 277, 277, 286, 
-	287, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 288, 277, 291, 
-	277, 277, 277, 56, 292, 277, 282, 283, 
-	284, 277, 277, 277, 293, 277, 291, 277, 
-	287, 277, 294, 295, 296, 297, 43, 282, 
-	283, 284, 277, 277, 73, 298, 277, 277, 
-	286, 287, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 277, 288, 277, 
-	299, 295, 300, 300, 43, 282, 283, 284, 
-	277, 277, 277, 298, 277, 277, 286, 287, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 288, 277, 295, 300, 
-	300, 43, 282, 283, 284, 277, 277, 277, 
-	298, 277, 277, 286, 287, 277, 277, 277, 
+	277, 277, 277, 277, 277, 287, 277, 290, 
+	277, 277, 277, 56, 291, 277, 282, 283, 
+	284, 277, 277, 277, 292, 277, 290, 277, 
+	293, 294, 295, 296, 43, 282, 283, 284, 
+	277, 277, 73, 297, 277, 277, 286, 277, 
+	277, 277, 277, 277, 277, 277, 277, 277, 
+	277, 277, 277, 277, 287, 277, 298, 294, 
+	299, 299, 43, 282, 283, 284, 277, 277, 
+	277, 297, 277, 277, 286, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 277, 277, 
+	277, 277, 287, 277, 294, 299, 299, 43, 
+	282, 283, 284, 277, 277, 277, 297, 277, 
+	277, 286, 277, 277, 277, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 277, 287, 
+	277, 300, 277, 277, 277, 56, 301, 277, 
+	282, 283, 284, 277, 277, 277, 292, 277, 
+	300, 277, 302, 303, 304, 305, 43, 282, 
+	283, 284, 277, 277, 71, 306, 277, 277, 
+	286, 277, 277, 277, 277, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 287, 277, 
+	307, 303, 308, 308, 43, 282, 283, 284, 
+	277, 277, 277, 306, 277, 277, 286, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 288, 277, 301, 277, 277, 277, 56, 
-	302, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 301, 277, 287, 277, 303, 304, 
-	305, 306, 43, 282, 283, 284, 277, 277, 
-	71, 307, 277, 277, 286, 287, 277, 277, 
+	277, 277, 277, 277, 287, 277, 303, 308, 
+	308, 43, 282, 283, 284, 277, 277, 277, 
+	306, 277, 277, 286, 277, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 288, 277, 308, 304, 309, 309, 
-	43, 282, 283, 284, 277, 277, 277, 307, 
-	277, 277, 286, 287, 277, 277, 277, 277, 
+	277, 287, 277, 309, 277, 277, 277, 56, 
+	310, 277, 282, 283, 284, 277, 277, 277, 
+	292, 277, 309, 277, 311, 312, 313, 314, 
+	43, 282, 283, 284, 277, 277, 69, 315, 
+	277, 277, 286, 277, 277, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	288, 277, 304, 309, 309, 43, 282, 283, 
-	284, 277, 277, 277, 307, 277, 277, 286, 
-	287, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 288, 277, 310, 
-	277, 277, 277, 56, 311, 277, 282, 283, 
-	284, 277, 277, 277, 293, 277, 310, 277, 
-	287, 277, 312, 313, 314, 315, 43, 282, 
-	283, 284, 277, 277, 69, 316, 277, 277, 
-	286, 287, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 277, 288, 277, 
-	317, 313, 318, 318, 43, 282, 283, 284, 
-	277, 277, 277, 316, 277, 277, 286, 287, 
+	287, 277, 316, 312, 317, 317, 43, 282, 
+	283, 284, 277, 277, 277, 315, 277, 277, 
+	286, 277, 277, 277, 277, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 287, 277, 
+	312, 317, 317, 43, 282, 283, 284, 277, 
+	277, 277, 315, 277, 277, 286, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 288, 277, 313, 318, 
-	318, 43, 282, 283, 284, 277, 277, 277, 
-	316, 277, 277, 286, 287, 277, 277, 277, 
+	277, 277, 277, 287, 277, 318, 277, 277, 
+	277, 56, 319, 277, 282, 283, 284, 277, 
+	277, 277, 292, 277, 318, 277, 320, 321, 
+	322, 323, 43, 282, 283, 284, 277, 277, 
+	67, 324, 277, 277, 286, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 288, 277, 319, 277, 277, 277, 56, 
-	320, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 319, 277, 287, 277, 321, 322, 
-	323, 324, 43, 282, 283, 284, 277, 277, 
-	67, 325, 277, 277, 286, 287, 277, 277, 
+	277, 277, 287, 277, 325, 321, 326, 326, 
+	43, 282, 283, 284, 277, 277, 277, 324, 
+	277, 277, 286, 277, 277, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 288, 277, 326, 322, 327, 327, 
-	43, 282, 283, 284, 277, 277, 277, 325, 
-	277, 277, 286, 287, 277, 277, 277, 277, 
+	287, 277, 321, 326, 326, 43, 282, 283, 
+	284, 277, 277, 277, 324, 277, 277, 286, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	288, 277, 322, 327, 327, 43, 282, 283, 
-	284, 277, 277, 277, 325, 277, 277, 286, 
-	287, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 288, 277, 56, 
-	328, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 277, 277, 287, 277, 282, 283, 
-	284, 277, 277, 277, 293, 277, 277, 277, 
-	287, 277, 329, 277, 277, 330, 283, 284, 
-	277, 283, 284, 277, 283, 331, 277, 283, 
-	277, 329, 277, 277, 277, 283, 284, 277, 
-	332, 277, 333, 334, 277, 282, 283, 284, 
-	277, 277, 41, 277, 277, 277, 277, 287, 
+	277, 277, 277, 277, 277, 287, 277, 56, 
+	327, 277, 282, 283, 284, 277, 277, 277, 
+	292, 277, 282, 283, 284, 277, 277, 277, 
+	292, 277, 328, 277, 277, 329, 283, 284, 
+	277, 283, 284, 277, 330, 277, 283, 331, 
+	277, 283, 332, 277, 283, 277, 328, 277, 
+	277, 277, 283, 284, 277, 333, 277, 334, 
+	335, 277, 282, 283, 284, 277, 277, 41, 
 	277, 40, 277, 277, 277, 277, 282, 283, 
-	284, 277, 277, 277, 277, 277, 277, 277, 
-	287, 277, 282, 283, 284, 277, 277, 277, 
-	277, 277, 277, 277, 287, 277, 335, 277, 
-	277, 277, 277, 282, 283, 284, 277, 282, 
-	283, 284, 277, 332, 277, 277, 277, 277, 
-	282, 283, 284, 277, 277, 277, 277, 277, 
-	277, 277, 287, 277, 332, 277, 333, 277, 
-	277, 282, 283, 284, 277, 277, 41, 277, 
-	277, 277, 277, 287, 277, 56, 277, 336, 
-	336, 43, 282, 283, 284, 277, 277, 277, 
-	293, 277, 277, 277, 287, 277, 337, 65, 
-	338, 339, 46, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 65, 
-	338, 339, 46, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 338, 
-	338, 46, 282, 283, 284, 277, 277, 277, 
-	293, 277, 277, 277, 287, 277, 340, 62, 
-	341, 342, 49, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 62, 
-	341, 342, 49, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 341, 
-	341, 49, 282, 283, 284, 277, 277, 277, 
-	293, 277, 277, 277, 287, 277, 343, 59, 
-	344, 345, 52, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 59, 
-	344, 345, 52, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 344, 
-	344, 52, 282, 283, 284, 277, 277, 277, 
-	293, 277, 277, 277, 287, 277, 346, 56, 
-	277, 347, 277, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 56, 
-	277, 347, 277, 282, 283, 284, 277, 277, 
-	277, 293, 277, 277, 277, 287, 277, 348, 
-	277, 282, 283, 284, 277, 277, 277, 293, 
-	277, 277, 277, 287, 277, 56, 277, 277, 
-	277, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 277, 277, 287, 277, 39, 40, 
-	277, 277, 56, 328, 277, 282, 283, 284, 
-	277, 277, 277, 293, 277, 39, 277, 287, 
-	277, 322, 327, 327, 43, 282, 283, 284, 
-	277, 277, 277, 325, 277, 277, 277, 287, 
+	284, 277, 282, 283, 284, 277, 333, 277, 
+	277, 277, 277, 282, 283, 284, 277, 333, 
+	277, 334, 277, 277, 282, 283, 284, 277, 
+	277, 41, 277, 56, 277, 336, 336, 43, 
+	282, 283, 284, 277, 277, 277, 292, 277, 
+	337, 65, 338, 339, 46, 282, 283, 284, 
+	277, 277, 277, 292, 277, 65, 338, 339, 
+	46, 282, 283, 284, 277, 277, 277, 292, 
+	277, 338, 338, 46, 282, 283, 284, 277, 
+	277, 277, 292, 277, 340, 62, 341, 342, 
+	49, 282, 283, 284, 277, 277, 277, 292, 
+	277, 62, 341, 342, 49, 282, 283, 284, 
+	277, 277, 277, 292, 277, 341, 341, 49, 
+	282, 283, 284, 277, 277, 277, 292, 277, 
+	343, 59, 344, 345, 52, 282, 283, 284, 
+	277, 277, 277, 292, 277, 59, 344, 345, 
+	52, 282, 283, 284, 277, 277, 277, 292, 
+	277, 344, 344, 52, 282, 283, 284, 277, 
+	277, 277, 292, 277, 346, 56, 277, 347, 
+	277, 282, 283, 284, 277, 277, 277, 292, 
+	277, 56, 277, 347, 277, 282, 283, 284, 
+	277, 277, 277, 292, 277, 348, 277, 282, 
+	283, 284, 277, 277, 277, 292, 277, 56, 
+	277, 277, 277, 277, 282, 283, 284, 277, 
+	277, 277, 292, 277, 39, 40, 277, 277, 
+	56, 327, 277, 282, 283, 284, 277, 277, 
+	277, 292, 277, 39, 277, 321, 326, 326, 
+	43, 282, 283, 284, 277, 277, 277, 324, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 288, 277, 322, 327, 
-	327, 43, 282, 283, 284, 277, 277, 277, 
-	325, 277, 277, 277, 287, 277, 321, 322, 
-	327, 327, 43, 282, 283, 284, 277, 277, 
-	277, 325, 277, 277, 286, 287, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 288, 277, 321, 322, 323, 327, 
-	43, 282, 283, 284, 277, 277, 67, 325, 
-	277, 277, 286, 287, 277, 277, 277, 277, 
+	287, 277, 321, 326, 326, 43, 282, 283, 
+	284, 277, 277, 277, 324, 277, 320, 321, 
+	326, 326, 43, 282, 283, 284, 277, 277, 
+	277, 324, 277, 277, 286, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	288, 277, 319, 277, 349, 277, 336, 336, 
-	43, 282, 283, 284, 277, 277, 277, 293, 
-	277, 319, 277, 287, 277, 319, 277, 277, 
-	277, 277, 277, 277, 282, 283, 284, 277, 
-	277, 277, 293, 277, 319, 277, 287, 277, 
-	319, 277, 277, 277, 277, 350, 277, 282, 
-	283, 284, 277, 277, 277, 293, 277, 319, 
-	277, 287, 277, 319, 277, 349, 277, 277, 
+	277, 277, 287, 277, 320, 321, 322, 326, 
+	43, 282, 283, 284, 277, 277, 67, 324, 
+	277, 277, 286, 277, 277, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 277, 277, 
+	287, 277, 318, 277, 349, 277, 336, 336, 
+	43, 282, 283, 284, 277, 277, 277, 292, 
+	277, 318, 277, 318, 277, 277, 277, 277, 
 	277, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 319, 277, 287, 277, 319, 40, 
-	277, 277, 56, 320, 277, 282, 283, 284, 
-	277, 277, 277, 293, 277, 319, 277, 287, 
-	277, 312, 313, 318, 318, 43, 282, 283, 
-	284, 277, 277, 277, 316, 277, 277, 286, 
-	287, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 288, 277, 312, 
-	313, 314, 318, 43, 282, 283, 284, 277, 
-	277, 69, 316, 277, 277, 286, 287, 277, 
+	292, 277, 318, 277, 318, 277, 277, 277, 
+	277, 350, 277, 282, 283, 284, 277, 277, 
+	277, 292, 277, 318, 277, 318, 277, 349, 
+	277, 277, 277, 277, 282, 283, 284, 277, 
+	277, 277, 292, 277, 318, 277, 318, 40, 
+	277, 277, 56, 319, 277, 282, 283, 284, 
+	277, 277, 277, 292, 277, 318, 277, 311, 
+	312, 317, 317, 43, 282, 283, 284, 277, 
+	277, 277, 315, 277, 277, 286, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 288, 277, 310, 277, 351, 
-	277, 336, 336, 43, 282, 283, 284, 277, 
-	277, 277, 293, 277, 310, 277, 287, 277, 
-	310, 277, 277, 277, 277, 277, 277, 282, 
-	283, 284, 277, 277, 277, 293, 277, 310, 
-	277, 287, 277, 310, 277, 277, 277, 277, 
-	352, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 310, 277, 287, 277, 310, 277, 
+	277, 277, 277, 287, 277, 311, 312, 313, 
+	317, 43, 282, 283, 284, 277, 277, 69, 
+	315, 277, 277, 286, 277, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 277, 277, 
+	277, 287, 277, 309, 277, 351, 277, 336, 
+	336, 43, 282, 283, 284, 277, 277, 277, 
+	292, 277, 309, 277, 309, 277, 277, 277, 
+	277, 277, 277, 282, 283, 284, 277, 277, 
+	277, 292, 277, 309, 277, 309, 277, 277, 
+	277, 277, 352, 277, 282, 283, 284, 277, 
+	277, 277, 292, 277, 309, 277, 309, 277, 
 	351, 277, 277, 277, 277, 282, 283, 284, 
-	277, 277, 277, 293, 277, 310, 277, 287, 
-	277, 310, 40, 277, 277, 56, 311, 277, 
-	282, 283, 284, 277, 277, 277, 293, 277, 
-	310, 277, 287, 277, 303, 304, 309, 309, 
-	43, 282, 283, 284, 277, 277, 277, 307, 
-	277, 277, 286, 287, 277, 277, 277, 277, 
+	277, 277, 277, 292, 277, 309, 277, 309, 
+	40, 277, 277, 56, 310, 277, 282, 283, 
+	284, 277, 277, 277, 292, 277, 309, 277, 
+	302, 303, 308, 308, 43, 282, 283, 284, 
+	277, 277, 277, 306, 277, 277, 286, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	288, 277, 303, 304, 305, 309, 43, 282, 
-	283, 284, 277, 277, 71, 307, 277, 277, 
-	286, 287, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 277, 277, 277, 288, 277, 
-	301, 277, 353, 277, 336, 336, 43, 282, 
-	283, 284, 277, 277, 277, 293, 277, 301, 
-	277, 287, 277, 301, 277, 277, 277, 277, 
-	277, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 301, 277, 287, 277, 301, 277, 
+	277, 277, 277, 277, 287, 277, 302, 303, 
+	304, 308, 43, 282, 283, 284, 277, 277, 
+	71, 306, 277, 277, 286, 277, 277, 277, 
+	277, 277, 277, 277, 277, 277, 277, 277, 
+	277, 277, 287, 277, 300, 277, 353, 277, 
+	336, 336, 43, 282, 283, 284, 277, 277, 
+	277, 292, 277, 300, 277, 300, 277, 277, 
+	277, 277, 277, 277, 282, 283, 284, 277, 
+	277, 277, 292, 277, 300, 277, 300, 277, 
 	277, 277, 277, 354, 277, 282, 283, 284, 
-	277, 277, 277, 293, 277, 301, 277, 287, 
-	277, 301, 277, 353, 277, 277, 277, 277, 
-	282, 283, 284, 277, 277, 277, 293, 277, 
-	301, 277, 287, 277, 301, 40, 277, 277, 
-	56, 302, 277, 282, 283, 284, 277, 277, 
-	277, 293, 277, 301, 277, 287, 277, 294, 
-	295, 300, 300, 43, 282, 283, 284, 277, 
-	277, 277, 298, 277, 277, 286, 287, 277, 
+	277, 277, 277, 292, 277, 300, 277, 300, 
+	277, 353, 277, 277, 277, 277, 282, 283, 
+	284, 277, 277, 277, 292, 277, 300, 277, 
+	300, 40, 277, 277, 56, 301, 277, 282, 
+	283, 284, 277, 277, 277, 292, 277, 300, 
+	277, 293, 294, 299, 299, 43, 282, 283, 
+	284, 277, 277, 277, 297, 277, 277, 286, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 277, 288, 277, 294, 295, 296, 
-	300, 43, 282, 283, 284, 277, 277, 73, 
-	298, 277, 277, 286, 287, 277, 277, 277, 
+	277, 277, 277, 277, 277, 287, 277, 293, 
+	294, 295, 299, 43, 282, 283, 284, 277, 
+	277, 73, 297, 277, 277, 286, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 288, 277, 291, 277, 355, 277, 336, 
-	336, 43, 282, 283, 284, 277, 277, 277, 
-	293, 277, 291, 277, 287, 277, 291, 277, 
+	277, 277, 277, 287, 277, 290, 277, 355, 
+	277, 336, 336, 43, 282, 283, 284, 277, 
+	277, 277, 292, 277, 290, 277, 290, 277, 
 	277, 277, 277, 277, 277, 282, 283, 284, 
-	277, 277, 277, 293, 277, 291, 277, 287, 
-	277, 291, 277, 277, 277, 277, 356, 277, 
-	282, 283, 284, 277, 277, 277, 293, 277, 
-	291, 277, 287, 277, 291, 277, 355, 277, 
-	277, 277, 277, 282, 283, 284, 277, 277, 
-	277, 293, 277, 291, 277, 287, 277, 74, 
-	42, 42, 43, 277, 277, 277, 277, 277, 
-	277, 74, 277, 291, 40, 277, 277, 56, 
-	292, 277, 282, 283, 284, 277, 277, 277, 
-	293, 277, 291, 277, 287, 277, 278, 279, 
-	290, 281, 43, 282, 283, 284, 277, 277, 
-	277, 285, 277, 277, 286, 287, 277, 277, 
+	277, 277, 277, 292, 277, 290, 277, 290, 
+	277, 277, 277, 277, 356, 277, 282, 283, 
+	284, 277, 277, 277, 292, 277, 290, 277, 
+	290, 277, 355, 277, 277, 277, 277, 282, 
+	283, 284, 277, 277, 277, 292, 277, 290, 
+	277, 74, 42, 42, 43, 277, 277, 277, 
+	277, 277, 277, 74, 277, 290, 40, 277, 
+	277, 56, 291, 277, 282, 283, 284, 277, 
+	277, 277, 292, 277, 290, 277, 278, 279, 
+	289, 281, 43, 282, 283, 284, 277, 277, 
+	277, 285, 277, 277, 286, 277, 277, 277, 
 	277, 277, 277, 277, 277, 277, 277, 277, 
-	277, 277, 288, 277, 358, 184, 359, 359, 
+	277, 277, 287, 277, 358, 184, 359, 359, 
 	81, 187, 188, 189, 357, 357, 357, 191, 
-	357, 357, 194, 360, 357, 357, 357, 357, 
+	357, 357, 194, 357, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
 	196, 357, 184, 359, 359, 81, 187, 188, 
 	189, 357, 357, 357, 191, 357, 357, 194, 
-	360, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 357, 196, 357, 361, 
-	357, 357, 357, 95, 362, 357, 187, 188, 
-	189, 357, 357, 357, 363, 357, 361, 357, 
-	360, 357, 364, 365, 366, 367, 81, 187, 
-	188, 189, 357, 357, 112, 368, 357, 357, 
-	194, 360, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 357, 357, 196, 357, 
-	369, 365, 370, 370, 81, 187, 188, 189, 
-	357, 357, 357, 368, 357, 357, 194, 360, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 196, 357, 365, 370, 
-	370, 81, 187, 188, 189, 357, 357, 357, 
-	368, 357, 357, 194, 360, 357, 357, 357, 
+	357, 357, 357, 357, 357, 196, 357, 360, 
+	357, 357, 357, 95, 361, 357, 187, 188, 
+	189, 357, 357, 357, 362, 357, 360, 357, 
+	363, 364, 365, 366, 81, 187, 188, 189, 
+	357, 357, 112, 367, 357, 357, 194, 357, 
+	357, 357, 357, 357, 357, 357, 357, 357, 
+	357, 357, 357, 357, 196, 357, 368, 364, 
+	369, 369, 81, 187, 188, 189, 357, 357, 
+	357, 367, 357, 357, 194, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 196, 357, 371, 357, 357, 357, 95, 
-	372, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 371, 357, 360, 357, 373, 374, 
-	375, 376, 81, 187, 188, 189, 357, 357, 
-	110, 377, 357, 357, 194, 360, 357, 357, 
+	357, 357, 196, 357, 364, 369, 369, 81, 
+	187, 188, 189, 357, 357, 357, 367, 357, 
+	357, 194, 357, 357, 357, 357, 357, 357, 
+	357, 357, 357, 357, 357, 357, 357, 196, 
+	357, 370, 357, 357, 357, 95, 371, 357, 
+	187, 188, 189, 357, 357, 357, 362, 357, 
+	370, 357, 372, 373, 374, 375, 81, 187, 
+	188, 189, 357, 357, 110, 376, 357, 357, 
+	194, 357, 357, 357, 357, 357, 357, 357, 
+	357, 357, 357, 357, 357, 357, 196, 357, 
+	377, 373, 378, 378, 81, 187, 188, 189, 
+	357, 357, 357, 376, 357, 357, 194, 357, 
+	357, 357, 357, 357, 357, 357, 357, 357, 
+	357, 357, 357, 357, 196, 357, 373, 378, 
+	378, 81, 187, 188, 189, 357, 357, 357, 
+	376, 357, 357, 194, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 196, 357, 378, 374, 379, 379, 
-	81, 187, 188, 189, 357, 357, 357, 377, 
-	357, 357, 194, 360, 357, 357, 357, 357, 
+	357, 196, 357, 379, 357, 357, 357, 95, 
+	380, 357, 187, 188, 189, 357, 357, 357, 
+	362, 357, 379, 357, 381, 382, 383, 384, 
+	81, 187, 188, 189, 357, 357, 108, 385, 
+	357, 357, 194, 357, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	196, 357, 374, 379, 379, 81, 187, 188, 
-	189, 357, 357, 357, 377, 357, 357, 194, 
-	360, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 357, 196, 357, 380, 
-	357, 357, 357, 95, 381, 357, 187, 188, 
-	189, 357, 357, 357, 363, 357, 380, 357, 
-	360, 357, 382, 383, 384, 385, 81, 187, 
-	188, 189, 357, 357, 108, 386, 357, 357, 
-	194, 360, 357, 357, 357, 357, 357, 357, 
+	196, 357, 386, 382, 387, 387, 81, 187, 
+	188, 189, 357, 357, 357, 385, 357, 357, 
+	194, 357, 357, 357, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 196, 357, 
-	387, 383, 388, 388, 81, 187, 188, 189, 
-	357, 357, 357, 386, 357, 357, 194, 360, 
+	382, 387, 387, 81, 187, 188, 189, 357, 
+	357, 357, 385, 357, 357, 194, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 196, 357, 383, 388, 
-	388, 81, 187, 188, 189, 357, 357, 357, 
-	386, 357, 357, 194, 360, 357, 357, 357, 
+	357, 357, 357, 196, 357, 388, 357, 357, 
+	357, 95, 389, 357, 187, 188, 189, 357, 
+	357, 357, 362, 357, 388, 357, 390, 391, 
+	392, 393, 81, 187, 188, 189, 357, 357, 
+	106, 394, 357, 357, 194, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 196, 357, 389, 357, 357, 357, 95, 
-	390, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 389, 357, 360, 357, 391, 392, 
-	393, 394, 81, 187, 188, 189, 357, 357, 
-	106, 395, 357, 357, 194, 360, 357, 357, 
+	357, 357, 196, 357, 395, 391, 396, 396, 
+	81, 187, 188, 189, 357, 357, 357, 394, 
+	357, 357, 194, 357, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 196, 357, 396, 392, 397, 397, 
-	81, 187, 188, 189, 357, 357, 357, 395, 
-	357, 357, 194, 360, 357, 357, 357, 357, 
+	196, 357, 391, 396, 396, 81, 187, 188, 
+	189, 357, 357, 357, 394, 357, 357, 194, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	196, 357, 392, 397, 397, 81, 187, 188, 
-	189, 357, 357, 357, 395, 357, 357, 194, 
-	360, 357, 357, 357, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 196, 357, 95, 
-	398, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 357, 357, 360, 357, 187, 188, 
-	189, 357, 357, 357, 363, 357, 357, 357, 
-	360, 357, 399, 357, 357, 400, 188, 189, 
-	357, 188, 189, 357, 188, 401, 357, 188, 
-	357, 399, 357, 357, 357, 188, 189, 357, 
-	402, 357, 403, 404, 357, 187, 188, 189, 
-	357, 357, 79, 357, 357, 357, 357, 360, 
+	397, 357, 187, 188, 189, 357, 357, 357, 
+	362, 357, 187, 188, 189, 357, 357, 357, 
+	362, 357, 398, 357, 357, 399, 188, 189, 
+	357, 188, 189, 357, 400, 357, 188, 401, 
+	357, 188, 402, 357, 188, 357, 398, 357, 
+	357, 357, 188, 189, 357, 403, 357, 404, 
+	405, 357, 187, 188, 189, 357, 357, 79, 
 	357, 78, 357, 357, 357, 357, 187, 188, 
-	189, 357, 357, 357, 357, 357, 357, 357, 
-	360, 357, 187, 188, 189, 357, 357, 357, 
-	357, 357, 357, 357, 360, 357, 405, 357, 
-	357, 357, 357, 187, 188, 189, 357, 187, 
-	188, 189, 357, 402, 357, 357, 357, 357, 
-	187, 188, 189, 357, 357, 357, 357, 357, 
-	357, 357, 360, 357, 402, 357, 403, 357, 
-	357, 187, 188, 189, 357, 357, 79, 357, 
-	357, 357, 357, 360, 357, 95, 357, 406, 
-	406, 81, 187, 188, 189, 357, 357, 357, 
-	363, 357, 357, 357, 360, 357, 407, 104, 
-	408, 409, 85, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 104, 
-	408, 409, 85, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 408, 
-	408, 85, 187, 188, 189, 357, 357, 357, 
-	363, 357, 357, 357, 360, 357, 410, 101, 
-	411, 412, 88, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 101, 
-	411, 412, 88, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 411, 
-	411, 88, 187, 188, 189, 357, 357, 357, 
-	363, 357, 357, 357, 360, 357, 413, 98, 
-	414, 415, 91, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 98, 
-	414, 415, 91, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 414, 
-	414, 91, 187, 188, 189, 357, 357, 357, 
-	363, 357, 357, 357, 360, 357, 416, 95, 
-	357, 417, 357, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 95, 
-	357, 417, 357, 187, 188, 189, 357, 357, 
-	357, 363, 357, 357, 357, 360, 357, 418, 
-	357, 187, 188, 189, 357, 357, 357, 363, 
-	357, 357, 357, 360, 357, 95, 357, 357, 
-	357, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 357, 357, 360, 357, 77, 78, 
-	357, 357, 95, 398, 357, 187, 188, 189, 
-	357, 357, 357, 363, 357, 77, 357, 360, 
-	357, 392, 397, 397, 81, 187, 188, 189, 
-	357, 357, 357, 395, 357, 357, 357, 360, 
+	189, 357, 187, 188, 189, 357, 403, 357, 
+	357, 357, 357, 187, 188, 189, 357, 403, 
+	357, 404, 357, 357, 187, 188, 189, 357, 
+	357, 79, 357, 95, 357, 406, 406, 81, 
+	187, 188, 189, 357, 357, 357, 362, 357, 
+	407, 104, 408, 409, 85, 187, 188, 189, 
+	357, 357, 357, 362, 357, 104, 408, 409, 
+	85, 187, 188, 189, 357, 357, 357, 362, 
+	357, 408, 408, 85, 187, 188, 189, 357, 
+	357, 357, 362, 357, 410, 101, 411, 412, 
+	88, 187, 188, 189, 357, 357, 357, 362, 
+	357, 101, 411, 412, 88, 187, 188, 189, 
+	357, 357, 357, 362, 357, 411, 411, 88, 
+	187, 188, 189, 357, 357, 357, 362, 357, 
+	413, 98, 414, 415, 91, 187, 188, 189, 
+	357, 357, 357, 362, 357, 98, 414, 415, 
+	91, 187, 188, 189, 357, 357, 357, 362, 
+	357, 414, 414, 91, 187, 188, 189, 357, 
+	357, 357, 362, 357, 416, 95, 357, 417, 
+	357, 187, 188, 189, 357, 357, 357, 362, 
+	357, 95, 357, 417, 357, 187, 188, 189, 
+	357, 357, 357, 362, 357, 418, 357, 187, 
+	188, 189, 357, 357, 357, 362, 357, 95, 
+	357, 357, 357, 357, 187, 188, 189, 357, 
+	357, 357, 362, 357, 77, 78, 357, 357, 
+	95, 397, 357, 187, 188, 189, 357, 357, 
+	357, 362, 357, 77, 357, 391, 396, 396, 
+	81, 187, 188, 189, 357, 357, 357, 394, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 196, 357, 392, 397, 
-	397, 81, 187, 188, 189, 357, 357, 357, 
-	395, 357, 357, 357, 360, 357, 391, 392, 
-	397, 397, 81, 187, 188, 189, 357, 357, 
-	357, 395, 357, 357, 194, 360, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 196, 357, 391, 392, 393, 397, 
-	81, 187, 188, 189, 357, 357, 106, 395, 
-	357, 357, 194, 360, 357, 357, 357, 357, 
+	196, 357, 391, 396, 396, 81, 187, 188, 
+	189, 357, 357, 357, 394, 357, 390, 391, 
+	396, 396, 81, 187, 188, 189, 357, 357, 
+	357, 394, 357, 357, 194, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	196, 357, 389, 357, 419, 357, 406, 406, 
-	81, 187, 188, 189, 357, 357, 357, 363, 
-	357, 389, 357, 360, 357, 389, 357, 357, 
-	357, 357, 357, 357, 187, 188, 189, 357, 
-	357, 357, 363, 357, 389, 357, 360, 357, 
-	389, 357, 357, 357, 357, 420, 357, 187, 
-	188, 189, 357, 357, 357, 363, 357, 389, 
-	357, 360, 357, 389, 357, 419, 357, 357, 
+	357, 357, 196, 357, 390, 391, 392, 396, 
+	81, 187, 188, 189, 357, 357, 106, 394, 
+	357, 357, 194, 357, 357, 357, 357, 357, 
+	357, 357, 357, 357, 357, 357, 357, 357, 
+	196, 357, 388, 357, 419, 357, 406, 406, 
+	81, 187, 188, 189, 357, 357, 357, 362, 
+	357, 388, 357, 388, 357, 357, 357, 357, 
 	357, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 389, 357, 360, 357, 389, 78, 
-	357, 357, 95, 390, 357, 187, 188, 189, 
-	357, 357, 357, 363, 357, 389, 357, 360, 
-	357, 382, 383, 388, 388, 81, 187, 188, 
-	189, 357, 357, 357, 386, 357, 357, 194, 
-	360, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 357, 196, 357, 382, 
-	383, 384, 388, 81, 187, 188, 189, 357, 
-	357, 108, 386, 357, 357, 194, 360, 357, 
+	362, 357, 388, 357, 388, 357, 357, 357, 
+	357, 420, 357, 187, 188, 189, 357, 357, 
+	357, 362, 357, 388, 357, 388, 357, 419, 
+	357, 357, 357, 357, 187, 188, 189, 357, 
+	357, 357, 362, 357, 388, 357, 388, 78, 
+	357, 357, 95, 389, 357, 187, 188, 189, 
+	357, 357, 357, 362, 357, 388, 357, 381, 
+	382, 387, 387, 81, 187, 188, 189, 357, 
+	357, 357, 385, 357, 357, 194, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 196, 357, 380, 357, 421, 
-	357, 406, 406, 81, 187, 188, 189, 357, 
-	357, 357, 363, 357, 380, 357, 360, 357, 
-	380, 357, 357, 357, 357, 357, 357, 187, 
-	188, 189, 357, 357, 357, 363, 357, 380, 
-	357, 360, 357, 380, 357, 357, 357, 357, 
-	422, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 380, 357, 360, 357, 380, 357, 
+	357, 357, 357, 196, 357, 381, 382, 383, 
+	387, 81, 187, 188, 189, 357, 357, 108, 
+	385, 357, 357, 194, 357, 357, 357, 357, 
+	357, 357, 357, 357, 357, 357, 357, 357, 
+	357, 196, 357, 379, 357, 421, 357, 406, 
+	406, 81, 187, 188, 189, 357, 357, 357, 
+	362, 357, 379, 357, 379, 357, 357, 357, 
+	357, 357, 357, 187, 188, 189, 357, 357, 
+	357, 362, 357, 379, 357, 379, 357, 357, 
+	357, 357, 422, 357, 187, 188, 189, 357, 
+	357, 357, 362, 357, 379, 357, 379, 357, 
 	421, 357, 357, 357, 357, 187, 188, 189, 
-	357, 357, 357, 363, 357, 380, 357, 360, 
-	357, 380, 78, 357, 357, 95, 381, 357, 
-	187, 188, 189, 357, 357, 357, 363, 357, 
-	380, 357, 360, 357, 373, 374, 379, 379, 
-	81, 187, 188, 189, 357, 357, 357, 377, 
-	357, 357, 194, 360, 357, 357, 357, 357, 
+	357, 357, 357, 362, 357, 379, 357, 379, 
+	78, 357, 357, 95, 380, 357, 187, 188, 
+	189, 357, 357, 357, 362, 357, 379, 357, 
+	372, 373, 378, 378, 81, 187, 188, 189, 
+	357, 357, 357, 376, 357, 357, 194, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	196, 357, 373, 374, 375, 379, 81, 187, 
-	188, 189, 357, 357, 110, 377, 357, 357, 
-	194, 360, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 357, 357, 357, 196, 357, 
-	371, 357, 423, 357, 406, 406, 81, 187, 
-	188, 189, 357, 357, 357, 363, 357, 371, 
-	357, 360, 357, 371, 357, 357, 357, 357, 
-	357, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 371, 357, 360, 357, 371, 357, 
+	357, 357, 357, 357, 196, 357, 372, 373, 
+	374, 378, 81, 187, 188, 189, 357, 357, 
+	110, 376, 357, 357, 194, 357, 357, 357, 
+	357, 357, 357, 357, 357, 357, 357, 357, 
+	357, 357, 196, 357, 370, 357, 423, 357, 
+	406, 406, 81, 187, 188, 189, 357, 357, 
+	357, 362, 357, 370, 357, 370, 357, 357, 
+	357, 357, 357, 357, 187, 188, 189, 357, 
+	357, 357, 362, 357, 370, 357, 370, 357, 
 	357, 357, 357, 424, 357, 187, 188, 189, 
-	357, 357, 357, 363, 357, 371, 357, 360, 
-	357, 371, 357, 423, 357, 357, 357, 357, 
-	187, 188, 189, 357, 357, 357, 363, 357, 
-	371, 357, 360, 357, 371, 78, 357, 357, 
-	95, 372, 357, 187, 188, 189, 357, 357, 
-	357, 363, 357, 371, 357, 360, 357, 364, 
-	365, 370, 370, 81, 187, 188, 189, 357, 
-	357, 357, 368, 357, 357, 194, 360, 357, 
+	357, 357, 357, 362, 357, 370, 357, 370, 
+	357, 423, 357, 357, 357, 357, 187, 188, 
+	189, 357, 357, 357, 362, 357, 370, 357, 
+	370, 78, 357, 357, 95, 371, 357, 187, 
+	188, 189, 357, 357, 357, 362, 357, 370, 
+	357, 363, 364, 369, 369, 81, 187, 188, 
+	189, 357, 357, 357, 367, 357, 357, 194, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 357, 357, 196, 357, 364, 365, 366, 
-	370, 81, 187, 188, 189, 357, 357, 112, 
-	368, 357, 357, 194, 360, 357, 357, 357, 
+	357, 357, 357, 357, 357, 196, 357, 363, 
+	364, 365, 369, 81, 187, 188, 189, 357, 
+	357, 112, 367, 357, 357, 194, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
-	357, 196, 357, 361, 357, 425, 357, 406, 
-	406, 81, 187, 188, 189, 357, 357, 357, 
-	363, 357, 361, 357, 360, 357, 361, 357, 
+	357, 357, 357, 196, 357, 360, 357, 425, 
+	357, 406, 406, 81, 187, 188, 189, 357, 
+	357, 357, 362, 357, 360, 357, 360, 357, 
 	357, 357, 357, 357, 357, 187, 188, 189, 
-	357, 357, 357, 363, 357, 361, 357, 360, 
-	357, 361, 357, 357, 357, 357, 426, 357, 
-	187, 188, 189, 357, 357, 357, 363, 357, 
-	361, 357, 360, 357, 361, 357, 425, 357, 
-	357, 357, 357, 187, 188, 189, 357, 357, 
-	357, 363, 357, 361, 357, 360, 357, 361, 
-	78, 357, 357, 95, 362, 357, 187, 188, 
-	189, 357, 357, 357, 363, 357, 361, 357, 
+	357, 357, 357, 362, 357, 360, 357, 360, 
+	357, 357, 357, 357, 426, 357, 187, 188, 
+	189, 357, 357, 357, 362, 357, 360, 357, 
+	360, 357, 425, 357, 357, 357, 357, 187, 
+	188, 189, 357, 357, 357, 362, 357, 360, 
+	357, 360, 78, 357, 357, 95, 361, 357, 
+	187, 188, 189, 357, 357, 357, 362, 357, 
 	360, 357, 113, 80, 80, 81, 427, 427, 
 	427, 427, 427, 152, 113, 427, 183, 184, 
 	359, 359, 81, 187, 188, 189, 357, 357, 
-	357, 191, 357, 357, 194, 360, 357, 357, 
+	357, 191, 357, 357, 194, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
 	357, 357, 196, 357, 113, 80, 80, 81, 
 	427, 427, 427, 427, 427, 427, 113, 427, 
 	429, 430, 431, 432, 119, 433, 434, 435, 
-	428, 428, 151, 436, 428, 428, 437, 438, 
+	428, 428, 151, 436, 428, 428, 437, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 439, 428, 440, 430, 
+	428, 428, 428, 428, 438, 428, 439, 430, 
 	432, 432, 119, 433, 434, 435, 428, 428, 
-	428, 436, 428, 428, 437, 438, 428, 428, 
+	428, 436, 428, 428, 437, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 439, 428, 430, 432, 432, 119, 
+	428, 428, 438, 428, 430, 432, 432, 119, 
 	433, 434, 435, 428, 428, 428, 436, 428, 
-	428, 437, 438, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 428, 439, 
-	428, 441, 428, 428, 428, 132, 442, 428, 
-	433, 434, 435, 428, 428, 428, 443, 428, 
-	441, 428, 438, 428, 444, 445, 446, 447, 
-	119, 433, 434, 435, 428, 428, 149, 448, 
-	428, 428, 437, 438, 428, 428, 428, 428, 
+	428, 437, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 428, 428, 438, 
+	428, 440, 428, 428, 428, 132, 441, 428, 
+	433, 434, 435, 428, 428, 428, 442, 428, 
+	440, 428, 443, 444, 445, 446, 119, 433, 
+	434, 435, 428, 428, 149, 447, 428, 428, 
+	437, 428, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 428, 438, 428, 
+	448, 444, 449, 449, 119, 433, 434, 435, 
+	428, 428, 428, 447, 428, 428, 437, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	439, 428, 449, 445, 450, 450, 119, 433, 
-	434, 435, 428, 428, 428, 448, 428, 428, 
-	437, 438, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 439, 428, 
-	445, 450, 450, 119, 433, 434, 435, 428, 
-	428, 428, 448, 428, 428, 437, 438, 428, 
+	428, 428, 428, 428, 438, 428, 444, 449, 
+	449, 119, 433, 434, 435, 428, 428, 428, 
+	447, 428, 428, 437, 428, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 439, 428, 451, 428, 428, 
-	428, 132, 452, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 451, 428, 438, 428, 
-	453, 454, 455, 456, 119, 433, 434, 435, 
-	428, 428, 147, 457, 428, 428, 437, 438, 
+	428, 438, 428, 450, 428, 428, 428, 132, 
+	451, 428, 433, 434, 435, 428, 428, 428, 
+	442, 428, 450, 428, 452, 453, 454, 455, 
+	119, 433, 434, 435, 428, 428, 147, 456, 
+	428, 428, 437, 428, 428, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 439, 428, 458, 454, 
-	459, 459, 119, 433, 434, 435, 428, 428, 
-	428, 457, 428, 428, 437, 438, 428, 428, 
+	438, 428, 457, 453, 458, 458, 119, 433, 
+	434, 435, 428, 428, 428, 456, 428, 428, 
+	437, 428, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 428, 438, 428, 
+	453, 458, 458, 119, 433, 434, 435, 428, 
+	428, 428, 456, 428, 428, 437, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 439, 428, 454, 459, 459, 119, 
-	433, 434, 435, 428, 428, 428, 457, 428, 
-	428, 437, 438, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 428, 439, 
-	428, 460, 428, 428, 428, 132, 461, 428, 
-	433, 434, 435, 428, 428, 428, 443, 428, 
-	460, 428, 438, 428, 462, 463, 464, 465, 
-	119, 433, 434, 435, 428, 428, 145, 466, 
-	428, 428, 437, 438, 428, 428, 428, 428, 
+	428, 428, 428, 438, 428, 459, 428, 428, 
+	428, 132, 460, 428, 433, 434, 435, 428, 
+	428, 428, 442, 428, 459, 428, 461, 462, 
+	463, 464, 119, 433, 434, 435, 428, 428, 
+	145, 465, 428, 428, 437, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	439, 428, 467, 463, 468, 468, 119, 433, 
-	434, 435, 428, 428, 428, 466, 428, 428, 
-	437, 438, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 439, 428, 
-	463, 468, 468, 119, 433, 434, 435, 428, 
-	428, 428, 466, 428, 428, 437, 438, 428, 
+	428, 428, 438, 428, 466, 462, 467, 467, 
+	119, 433, 434, 435, 428, 428, 428, 465, 
+	428, 428, 437, 428, 428, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 439, 428, 469, 428, 428, 
-	428, 132, 470, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 469, 428, 438, 428, 
-	471, 472, 473, 474, 119, 433, 434, 435, 
-	428, 428, 143, 475, 428, 428, 437, 438, 
+	438, 428, 462, 467, 467, 119, 433, 434, 
+	435, 428, 428, 428, 465, 428, 428, 437, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 439, 428, 476, 472, 
-	477, 477, 119, 433, 434, 435, 428, 428, 
-	428, 475, 428, 428, 437, 438, 428, 428, 
+	428, 428, 428, 428, 428, 438, 428, 468, 
+	428, 428, 428, 132, 469, 428, 433, 434, 
+	435, 428, 428, 428, 442, 428, 468, 428, 
+	470, 471, 472, 473, 119, 433, 434, 435, 
+	428, 428, 143, 474, 428, 428, 437, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 439, 428, 472, 477, 477, 119, 
-	433, 434, 435, 428, 428, 428, 475, 428, 
-	428, 437, 438, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 428, 439, 
-	428, 132, 478, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 428, 428, 438, 428, 
-	433, 434, 435, 428, 428, 428, 443, 428, 
-	428, 428, 438, 428, 479, 428, 428, 480, 
-	434, 435, 428, 434, 435, 428, 434, 481, 
-	428, 434, 428, 479, 428, 428, 428, 434, 
-	435, 428, 482, 428, 483, 484, 428, 433, 
-	434, 435, 428, 428, 117, 428, 428, 428, 
-	428, 438, 428, 116, 428, 428, 428, 428, 
-	433, 434, 435, 428, 428, 428, 428, 428, 
-	428, 428, 438, 428, 433, 434, 435, 428, 
-	428, 428, 428, 428, 428, 428, 438, 428, 
-	485, 428, 428, 428, 428, 433, 434, 435, 
-	428, 433, 434, 435, 428, 482, 428, 428, 
-	428, 428, 433, 434, 435, 428, 428, 428, 
-	428, 428, 428, 428, 438, 428, 482, 428, 
-	483, 428, 428, 433, 434, 435, 428, 428, 
-	117, 428, 428, 428, 428, 438, 428, 132, 
-	428, 486, 486, 119, 433, 434, 435, 428, 
-	428, 428, 443, 428, 428, 428, 438, 428, 
-	487, 141, 488, 489, 122, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 141, 488, 489, 122, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 488, 488, 122, 433, 434, 435, 428, 
-	428, 428, 443, 428, 428, 428, 438, 428, 
-	490, 138, 491, 492, 125, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 138, 491, 492, 125, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 491, 491, 125, 433, 434, 435, 428, 
-	428, 428, 443, 428, 428, 428, 438, 428, 
-	493, 135, 494, 495, 128, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 135, 494, 495, 128, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 494, 494, 128, 433, 434, 435, 428, 
-	428, 428, 443, 428, 428, 428, 438, 428, 
-	496, 132, 428, 497, 428, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 132, 428, 497, 428, 433, 434, 435, 
-	428, 428, 428, 443, 428, 428, 428, 438, 
-	428, 498, 428, 433, 434, 435, 428, 428, 
-	428, 443, 428, 428, 428, 438, 428, 132, 
-	428, 428, 428, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 428, 428, 438, 428, 
-	115, 116, 428, 428, 132, 478, 428, 433, 
-	434, 435, 428, 428, 428, 443, 428, 115, 
-	428, 438, 428, 472, 477, 477, 119, 433, 
-	434, 435, 428, 428, 428, 475, 428, 428, 
-	428, 438, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 439, 428, 
-	472, 477, 477, 119, 433, 434, 435, 428, 
-	428, 428, 475, 428, 428, 428, 438, 428, 
-	471, 472, 477, 477, 119, 433, 434, 435, 
-	428, 428, 428, 475, 428, 428, 437, 438, 
+	428, 428, 428, 428, 438, 428, 475, 471, 
+	476, 476, 119, 433, 434, 435, 428, 428, 
+	428, 474, 428, 428, 437, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 439, 428, 471, 472, 
-	473, 477, 119, 433, 434, 435, 428, 428, 
-	143, 475, 428, 428, 437, 438, 428, 428, 
+	428, 428, 438, 428, 471, 476, 476, 119, 
+	433, 434, 435, 428, 428, 428, 474, 428, 
+	428, 437, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 428, 428, 438, 
+	428, 132, 477, 428, 433, 434, 435, 428, 
+	428, 428, 442, 428, 433, 434, 435, 428, 
+	428, 428, 442, 428, 478, 428, 428, 479, 
+	434, 435, 428, 434, 435, 428, 480, 428, 
+	434, 481, 428, 434, 482, 428, 434, 428, 
+	478, 428, 428, 428, 434, 435, 428, 483, 
+	428, 484, 485, 428, 433, 434, 435, 428, 
+	428, 117, 428, 116, 428, 428, 428, 428, 
+	433, 434, 435, 428, 433, 434, 435, 428, 
+	483, 428, 428, 428, 428, 433, 434, 435, 
+	428, 483, 428, 484, 428, 428, 433, 434, 
+	435, 428, 428, 117, 428, 132, 428, 486, 
+	486, 119, 433, 434, 435, 428, 428, 428, 
+	442, 428, 487, 141, 488, 489, 122, 433, 
+	434, 435, 428, 428, 428, 442, 428, 141, 
+	488, 489, 122, 433, 434, 435, 428, 428, 
+	428, 442, 428, 488, 488, 122, 433, 434, 
+	435, 428, 428, 428, 442, 428, 490, 138, 
+	491, 492, 125, 433, 434, 435, 428, 428, 
+	428, 442, 428, 138, 491, 492, 125, 433, 
+	434, 435, 428, 428, 428, 442, 428, 491, 
+	491, 125, 433, 434, 435, 428, 428, 428, 
+	442, 428, 493, 135, 494, 495, 128, 433, 
+	434, 435, 428, 428, 428, 442, 428, 135, 
+	494, 495, 128, 433, 434, 435, 428, 428, 
+	428, 442, 428, 494, 494, 128, 433, 434, 
+	435, 428, 428, 428, 442, 428, 496, 132, 
+	428, 497, 428, 433, 434, 435, 428, 428, 
+	428, 442, 428, 132, 428, 497, 428, 433, 
+	434, 435, 428, 428, 428, 442, 428, 498, 
+	428, 433, 434, 435, 428, 428, 428, 442, 
+	428, 132, 428, 428, 428, 428, 433, 434, 
+	435, 428, 428, 428, 442, 428, 115, 116, 
+	428, 428, 132, 477, 428, 433, 434, 435, 
+	428, 428, 428, 442, 428, 115, 428, 471, 
+	476, 476, 119, 433, 434, 435, 428, 428, 
+	428, 474, 428, 428, 428, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 439, 428, 469, 428, 499, 428, 
-	486, 486, 119, 433, 434, 435, 428, 428, 
-	428, 443, 428, 469, 428, 438, 428, 469, 
-	428, 428, 428, 428, 428, 428, 433, 434, 
-	435, 428, 428, 428, 443, 428, 469, 428, 
-	438, 428, 469, 428, 428, 428, 428, 500, 
-	428, 433, 434, 435, 428, 428, 428, 443, 
-	428, 469, 428, 438, 428, 469, 428, 499, 
-	428, 428, 428, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 469, 428, 438, 428, 
-	469, 116, 428, 428, 132, 470, 428, 433, 
-	434, 435, 428, 428, 428, 443, 428, 469, 
-	428, 438, 428, 462, 463, 468, 468, 119, 
-	433, 434, 435, 428, 428, 428, 466, 428, 
-	428, 437, 438, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 428, 428, 439, 
-	428, 462, 463, 464, 468, 119, 433, 434, 
-	435, 428, 428, 145, 466, 428, 428, 437, 
-	438, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 439, 428, 460, 
-	428, 501, 428, 486, 486, 119, 433, 434, 
-	435, 428, 428, 428, 443, 428, 460, 428, 
-	438, 428, 460, 428, 428, 428, 428, 428, 
-	428, 433, 434, 435, 428, 428, 428, 443, 
-	428, 460, 428, 438, 428, 460, 428, 428, 
-	428, 428, 502, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 460, 428, 438, 428, 
-	460, 428, 501, 428, 428, 428, 428, 433, 
-	434, 435, 428, 428, 428, 443, 428, 460, 
-	428, 438, 428, 460, 116, 428, 428, 132, 
-	461, 428, 433, 434, 435, 428, 428, 428, 
-	443, 428, 460, 428, 438, 428, 453, 454, 
-	459, 459, 119, 433, 434, 435, 428, 428, 
-	428, 457, 428, 428, 437, 438, 428, 428, 
+	428, 428, 438, 428, 471, 476, 476, 119, 
+	433, 434, 435, 428, 428, 428, 474, 428, 
+	470, 471, 476, 476, 119, 433, 434, 435, 
+	428, 428, 428, 474, 428, 428, 437, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 439, 428, 453, 454, 455, 459, 
-	119, 433, 434, 435, 428, 428, 147, 457, 
-	428, 428, 437, 438, 428, 428, 428, 428, 
+	428, 428, 428, 428, 438, 428, 470, 471, 
+	472, 476, 119, 433, 434, 435, 428, 428, 
+	143, 474, 428, 428, 437, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	439, 428, 451, 428, 503, 428, 486, 486, 
-	119, 433, 434, 435, 428, 428, 428, 443, 
-	428, 451, 428, 438, 428, 451, 428, 428, 
+	428, 428, 438, 428, 468, 428, 499, 428, 
+	486, 486, 119, 433, 434, 435, 428, 428, 
+	428, 442, 428, 468, 428, 468, 428, 428, 
 	428, 428, 428, 428, 433, 434, 435, 428, 
-	428, 428, 443, 428, 451, 428, 438, 428, 
-	451, 428, 428, 428, 428, 504, 428, 433, 
-	434, 435, 428, 428, 428, 443, 428, 451, 
-	428, 438, 428, 451, 428, 503, 428, 428, 
-	428, 428, 433, 434, 435, 428, 428, 428, 
-	443, 428, 451, 428, 438, 428, 451, 116, 
-	428, 428, 132, 452, 428, 433, 434, 435, 
-	428, 428, 428, 443, 428, 451, 428, 438, 
-	428, 444, 445, 450, 450, 119, 433, 434, 
-	435, 428, 428, 428, 448, 428, 428, 437, 
-	438, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 428, 428, 439, 428, 444, 
-	445, 446, 450, 119, 433, 434, 435, 428, 
-	428, 149, 448, 428, 428, 437, 438, 428, 
+	428, 428, 442, 428, 468, 428, 468, 428, 
+	428, 428, 428, 500, 428, 433, 434, 435, 
+	428, 428, 428, 442, 428, 468, 428, 468, 
+	428, 499, 428, 428, 428, 428, 433, 434, 
+	435, 428, 428, 428, 442, 428, 468, 428, 
+	468, 116, 428, 428, 132, 469, 428, 433, 
+	434, 435, 428, 428, 428, 442, 428, 468, 
+	428, 461, 462, 467, 467, 119, 433, 434, 
+	435, 428, 428, 428, 465, 428, 428, 437, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	428, 428, 428, 439, 428, 441, 428, 505, 
+	428, 428, 428, 428, 428, 438, 428, 461, 
+	462, 463, 467, 119, 433, 434, 435, 428, 
+	428, 145, 465, 428, 428, 437, 428, 428, 
+	428, 428, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 438, 428, 459, 428, 501, 
 	428, 486, 486, 119, 433, 434, 435, 428, 
-	428, 428, 443, 428, 441, 428, 438, 428, 
-	441, 428, 428, 428, 428, 428, 428, 433, 
-	434, 435, 428, 428, 428, 443, 428, 441, 
-	428, 438, 428, 441, 428, 428, 428, 428, 
-	506, 428, 433, 434, 435, 428, 428, 428, 
-	443, 428, 441, 428, 438, 428, 441, 428, 
-	505, 428, 428, 428, 428, 433, 434, 435, 
-	428, 428, 428, 443, 428, 441, 428, 438, 
-	428, 441, 116, 428, 428, 132, 442, 428, 
-	433, 434, 435, 428, 428, 428, 443, 428, 
-	441, 428, 438, 428, 429, 430, 432, 432, 
+	428, 428, 442, 428, 459, 428, 459, 428, 
+	428, 428, 428, 428, 428, 433, 434, 435, 
+	428, 428, 428, 442, 428, 459, 428, 459, 
+	428, 428, 428, 428, 502, 428, 433, 434, 
+	435, 428, 428, 428, 442, 428, 459, 428, 
+	459, 428, 501, 428, 428, 428, 428, 433, 
+	434, 435, 428, 428, 428, 442, 428, 459, 
+	428, 459, 116, 428, 428, 132, 460, 428, 
+	433, 434, 435, 428, 428, 428, 442, 428, 
+	459, 428, 452, 453, 458, 458, 119, 433, 
+	434, 435, 428, 428, 428, 456, 428, 428, 
+	437, 428, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 428, 438, 428, 
+	452, 453, 454, 458, 119, 433, 434, 435, 
+	428, 428, 147, 456, 428, 428, 437, 428, 
+	428, 428, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 438, 428, 450, 428, 
+	503, 428, 486, 486, 119, 433, 434, 435, 
+	428, 428, 428, 442, 428, 450, 428, 450, 
+	428, 428, 428, 428, 428, 428, 433, 434, 
+	435, 428, 428, 428, 442, 428, 450, 428, 
+	450, 428, 428, 428, 428, 504, 428, 433, 
+	434, 435, 428, 428, 428, 442, 428, 450, 
+	428, 450, 428, 503, 428, 428, 428, 428, 
+	433, 434, 435, 428, 428, 428, 442, 428, 
+	450, 428, 450, 116, 428, 428, 132, 451, 
+	428, 433, 434, 435, 428, 428, 428, 442, 
+	428, 450, 428, 443, 444, 449, 449, 119, 
+	433, 434, 435, 428, 428, 428, 447, 428, 
+	428, 437, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 428, 428, 438, 
+	428, 443, 444, 445, 449, 119, 433, 434, 
+	435, 428, 428, 149, 447, 428, 428, 437, 
+	428, 428, 428, 428, 428, 428, 428, 428, 
+	428, 428, 428, 428, 428, 438, 428, 440, 
+	428, 505, 428, 486, 486, 119, 433, 434, 
+	435, 428, 428, 428, 442, 428, 440, 428, 
+	440, 428, 428, 428, 428, 428, 428, 433, 
+	434, 435, 428, 428, 428, 442, 428, 440, 
+	428, 440, 428, 428, 428, 428, 506, 428, 
+	433, 434, 435, 428, 428, 428, 442, 428, 
+	440, 428, 440, 428, 505, 428, 428, 428, 
+	428, 433, 434, 435, 428, 428, 428, 442, 
+	428, 440, 428, 440, 116, 428, 428, 132, 
+	441, 428, 433, 434, 435, 428, 428, 428, 
+	442, 428, 440, 428, 429, 430, 432, 432, 
 	119, 433, 434, 435, 428, 428, 428, 436, 
-	428, 428, 437, 438, 428, 428, 428, 428, 
+	428, 428, 437, 428, 428, 428, 428, 428, 
 	428, 428, 428, 428, 428, 428, 428, 428, 
-	439, 428, 181, 182, 183, 184, 507, 359, 
+	438, 428, 181, 182, 183, 184, 507, 359, 
 	81, 187, 188, 189, 190, 190, 152, 191, 
-	357, 181, 194, 360, 357, 357, 357, 357, 
+	357, 181, 194, 357, 357, 357, 357, 357, 
 	357, 357, 357, 357, 357, 357, 357, 357, 
 	196, 357, 198, 508, 200, 201, 5, 202, 
 	203, 204, 197, 197, 37, 205, 197, 197, 
-	206, 207, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 197, 208, 197, 
-	211, 182, 183, 184, 509, 510, 81, 511, 
-	203, 512, 190, 190, 152, 513, 197, 211, 
-	194, 514, 197, 197, 197, 197, 197, 197, 
+	206, 197, 197, 197, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 207, 197, 
+	210, 182, 183, 184, 509, 510, 81, 511, 
+	512, 513, 197, 190, 152, 514, 197, 210, 
+	194, 197, 197, 197, 197, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 196, 197, 
 	113, 80, 80, 81, 202, 203, 204, 197, 
-	197, 152, 515, 197, 197, 197, 207, 197, 
-	516, 2, 357, 357, 357, 426, 357, 187, 
-	188, 189, 357, 357, 357, 363, 357, 516, 
-	357, 360, 357, 517, 365, 518, 519, 81, 
-	511, 203, 512, 197, 197, 153, 368, 197, 
-	197, 194, 514, 197, 197, 197, 197, 197, 
+	197, 152, 515, 197, 516, 2, 357, 357, 
+	357, 426, 357, 187, 188, 189, 357, 357, 
+	357, 362, 357, 516, 357, 517, 364, 518, 
+	519, 81, 511, 512, 513, 197, 197, 153, 
+	367, 197, 197, 194, 197, 197, 197, 197, 
+	197, 197, 197, 197, 197, 197, 197, 197, 
+	197, 196, 197, 520, 364, 369, 369, 81, 
+	511, 512, 513, 197, 197, 197, 367, 197, 
+	197, 194, 197, 197, 197, 197, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 196, 
-	197, 520, 365, 370, 370, 81, 511, 203, 
-	512, 197, 197, 197, 368, 197, 197, 194, 
-	514, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 197, 197, 196, 197, 365, 
-	370, 370, 81, 511, 203, 512, 197, 197, 
-	197, 368, 197, 197, 194, 514, 197, 197, 
+	197, 364, 369, 369, 81, 511, 512, 513, 
+	197, 197, 197, 367, 197, 197, 194, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 196, 197, 521, 197, 197, 522, 
-	203, 512, 197, 203, 512, 197, 203, 523, 
-	197, 203, 197, 521, 197, 197, 197, 203, 
-	512, 197, 524, 197, 197, 197, 197, 511, 
-	203, 512, 197, 511, 203, 512, 197, 517, 
-	365, 370, 370, 81, 511, 203, 512, 197, 
-	197, 197, 368, 197, 197, 194, 514, 197, 
+	197, 197, 197, 197, 196, 197, 521, 197, 
+	197, 522, 512, 513, 197, 512, 513, 197, 
+	250, 197, 512, 523, 197, 512, 524, 197, 
+	512, 197, 521, 197, 197, 197, 512, 513, 
+	197, 517, 364, 369, 369, 81, 511, 512, 
+	513, 197, 197, 197, 367, 197, 197, 194, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 197, 197, 196, 197, 517, 365, 518, 
-	370, 81, 511, 203, 512, 197, 197, 153, 
-	368, 197, 197, 194, 514, 197, 197, 197, 
+	197, 197, 197, 197, 197, 196, 197, 517, 
+	364, 518, 369, 81, 511, 512, 513, 197, 
+	197, 153, 367, 197, 197, 194, 197, 197, 
 	197, 197, 197, 197, 197, 197, 197, 197, 
-	197, 196, 197, 211, 197, 275, 113, 525, 
-	525, 155, 202, 203, 204, 197, 197, 197, 
-	515, 197, 211, 197, 207, 197, 526, 179, 
-	527, 528, 157, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 179, 
-	527, 528, 157, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 527, 
-	527, 157, 511, 203, 512, 197, 197, 197, 
-	529, 197, 197, 197, 514, 197, 530, 176, 
-	531, 532, 160, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 176, 
-	531, 532, 160, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 531, 
-	531, 160, 511, 203, 512, 197, 197, 197, 
-	529, 197, 197, 197, 514, 197, 533, 173, 
-	534, 535, 163, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 173, 
-	534, 535, 163, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 534, 
-	534, 163, 511, 203, 512, 197, 197, 197, 
-	529, 197, 197, 197, 514, 197, 536, 170, 
-	197, 537, 197, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 170, 
-	197, 537, 197, 511, 203, 512, 197, 197, 
-	197, 529, 197, 197, 197, 514, 197, 511, 
-	203, 512, 197, 197, 197, 529, 197, 197, 
-	197, 514, 197, 538, 197, 539, 540, 197, 
-	511, 203, 512, 197, 197, 167, 197, 197, 
-	197, 197, 514, 197, 166, 197, 197, 197, 
-	197, 511, 203, 512, 197, 197, 197, 197, 
-	197, 197, 197, 514, 197, 511, 203, 512, 
-	197, 197, 197, 197, 197, 197, 197, 514, 
-	197, 538, 197, 197, 197, 197, 511, 203, 
-	512, 197, 197, 197, 197, 197, 197, 197, 
-	514, 197, 538, 197, 539, 197, 197, 511, 
-	203, 512, 197, 197, 167, 197, 197, 197, 
-	197, 514, 197, 516, 166, 357, 357, 95, 
-	362, 357, 187, 188, 189, 357, 357, 357, 
-	363, 357, 516, 357, 360, 357, 542, 541, 
-	541, 541, 541, 543, 544, 545, 541, 543, 
-	544, 545, 541, 546, 541, 541, 547, 544, 
-	545, 541, 544, 545, 541, 544, 548, 541, 
-	544, 541, 546, 541, 541, 541, 544, 545, 
-	541, 0
+	197, 197, 197, 196, 197, 210, 197, 275, 
+	113, 525, 525, 155, 202, 203, 204, 197, 
+	197, 197, 515, 197, 210, 197, 526, 179, 
+	527, 528, 157, 511, 512, 513, 197, 197, 
+	197, 529, 197, 179, 527, 528, 157, 511, 
+	512, 513, 197, 197, 197, 529, 197, 527, 
+	527, 157, 511, 512, 513, 197, 197, 197, 
+	529, 197, 530, 176, 531, 532, 160, 511, 
+	512, 513, 197, 197, 197, 529, 197, 176, 
+	531, 532, 160, 511, 512, 513, 197, 197, 
+	197, 529, 197, 531, 531, 160, 511, 512, 
+	513, 197, 197, 197, 529, 197, 533, 173, 
+	534, 535, 163, 511, 512, 513, 197, 197, 
+	197, 529, 197, 173, 534, 535, 163, 511, 
+	512, 513, 197, 197, 197, 529, 197, 534, 
+	534, 163, 511, 512, 513, 197, 197, 197, 
+	529, 197, 536, 170, 197, 537, 197, 511, 
+	512, 513, 197, 197, 197, 529, 197, 170, 
+	197, 537, 197, 511, 512, 513, 197, 197, 
+	197, 529, 197, 511, 512, 513, 197, 197, 
+	197, 529, 197, 538, 197, 539, 540, 197, 
+	511, 512, 513, 197, 197, 167, 197, 166, 
+	197, 197, 197, 197, 511, 512, 513, 197, 
+	511, 512, 513, 197, 538, 197, 197, 197, 
+	197, 511, 512, 513, 197, 538, 197, 539, 
+	197, 197, 511, 512, 513, 197, 197, 167, 
+	197, 516, 166, 357, 357, 95, 361, 357, 
+	187, 188, 189, 357, 357, 357, 362, 357, 
+	516, 357, 542, 541, 541, 541, 541, 543, 
+	544, 545, 541, 543, 544, 545, 541, 546, 
+	541, 541, 547, 544, 545, 541, 544, 545, 
+	541, 548, 541, 544, 549, 541, 544, 550, 
+	541, 544, 541, 546, 541, 541, 541, 544, 
+	545, 541, 0
 };
 
 static const short _indic_syllable_machine_trans_targs[] = {
-	170, 197, 199, 202, 3, 205, 4, 6, 
+	170, 199, 201, 202, 3, 205, 4, 6, 
 	208, 7, 9, 211, 10, 12, 214, 13, 
 	15, 16, 191, 18, 19, 213, 21, 22, 
 	210, 24, 25, 207, 216, 221, 225, 228, 
-	232, 235, 239, 242, 246, 249, 170, 277, 
-	279, 282, 39, 285, 40, 42, 288, 43, 
+	232, 235, 239, 242, 246, 249, 170, 279, 
+	281, 282, 39, 285, 40, 42, 288, 43, 
 	45, 291, 46, 48, 294, 49, 51, 52, 
 	271, 54, 55, 293, 57, 58, 290, 60, 
 	61, 287, 296, 301, 305, 308, 312, 315, 
-	319, 322, 326, 330, 170, 356, 358, 361, 
+	319, 322, 326, 330, 170, 358, 360, 361, 
 	75, 364, 170, 76, 78, 367, 79, 81, 
 	370, 82, 84, 373, 85, 87, 88, 350, 
 	90, 91, 372, 93, 94, 369, 96, 97, 
 	366, 375, 380, 384, 387, 391, 394, 398, 
-	401, 405, 170, 437, 439, 442, 110, 445, 
+	401, 405, 170, 439, 441, 442, 110, 445, 
 	111, 113, 448, 114, 116, 451, 117, 119, 
 	454, 120, 122, 123, 431, 125, 126, 453, 
 	128, 129, 450, 131, 132, 447, 456, 461, 
@@ -1281,52 +1189,52 @@ static const short _indic_syllable_machine_trans_targs[] = {
 	514, 152, 154, 517, 155, 520, 522, 523, 
 	159, 160, 519, 162, 163, 516, 165, 166, 
 	513, 168, 169, 510, 170, 171, 251, 331, 
-	333, 408, 410, 351, 170, 353, 411, 407, 
+	333, 408, 410, 351, 353, 354, 411, 407, 
 	490, 491, 378, 526, 379, 170, 172, 174, 
-	35, 250, 192, 170, 194, 248, 219, 200, 
-	220, 173, 34, 175, 244, 0, 176, 178, 
-	33, 243, 241, 177, 32, 179, 237, 180, 
-	182, 31, 236, 234, 181, 30, 183, 230, 
-	184, 186, 29, 229, 227, 185, 28, 187, 
-	223, 188, 190, 27, 222, 218, 189, 26, 
-	204, 193, 196, 195, 198, 1, 203, 201, 
+	35, 250, 192, 194, 195, 248, 219, 220, 
+	173, 34, 175, 244, 0, 176, 178, 33, 
+	243, 241, 177, 32, 179, 237, 180, 182, 
+	31, 236, 234, 181, 30, 183, 230, 184, 
+	186, 29, 229, 227, 185, 28, 187, 223, 
+	188, 190, 27, 222, 218, 189, 26, 204, 
+	193, 198, 170, 196, 197, 200, 1, 203, 
 	2, 206, 5, 23, 209, 8, 20, 212, 
 	11, 17, 215, 14, 217, 224, 226, 231, 
 	233, 238, 240, 245, 247, 170, 252, 254, 
-	71, 328, 272, 170, 274, 329, 299, 280, 
-	300, 253, 70, 255, 324, 36, 256, 258, 
-	69, 323, 321, 257, 68, 259, 317, 260, 
-	262, 67, 316, 314, 261, 66, 263, 310, 
-	264, 266, 65, 309, 307, 265, 64, 267, 
-	303, 268, 270, 63, 302, 298, 269, 62, 
-	284, 273, 276, 275, 278, 37, 283, 281, 
+	71, 328, 272, 274, 275, 329, 299, 300, 
+	253, 70, 255, 324, 36, 256, 258, 69, 
+	323, 321, 257, 68, 259, 317, 260, 262, 
+	67, 316, 314, 261, 66, 263, 310, 264, 
+	266, 65, 309, 307, 265, 64, 267, 303, 
+	268, 270, 63, 302, 298, 269, 62, 284, 
+	273, 278, 170, 276, 277, 280, 37, 283, 
 	38, 286, 41, 59, 289, 44, 56, 292, 
 	47, 53, 295, 50, 297, 304, 306, 311, 
 	313, 318, 320, 325, 327, 170, 332, 106, 
-	359, 334, 403, 72, 335, 337, 105, 402, 
-	400, 336, 104, 338, 396, 339, 341, 103, 
-	395, 393, 340, 102, 342, 389, 343, 345, 
-	101, 388, 386, 344, 100, 346, 382, 347, 
-	349, 99, 381, 377, 348, 98, 363, 352, 
-	355, 354, 357, 73, 362, 360, 74, 365, 
+	334, 403, 72, 335, 337, 105, 402, 400, 
+	336, 104, 338, 396, 339, 341, 103, 395, 
+	393, 340, 102, 342, 389, 343, 345, 101, 
+	388, 386, 344, 100, 346, 382, 347, 349, 
+	99, 381, 377, 348, 98, 363, 352, 357, 
+	170, 355, 356, 359, 73, 362, 74, 365, 
 	77, 95, 368, 80, 92, 371, 83, 89, 
 	374, 86, 376, 383, 385, 390, 392, 397, 
 	399, 404, 406, 170, 170, 412, 414, 142, 
-	141, 432, 170, 434, 488, 459, 440, 460, 
-	413, 415, 484, 107, 416, 418, 140, 483, 
-	481, 417, 139, 419, 477, 420, 422, 138, 
-	476, 474, 421, 137, 423, 470, 424, 426, 
-	136, 469, 467, 425, 135, 427, 463, 428, 
-	430, 134, 462, 458, 429, 133, 444, 433, 
-	436, 435, 438, 108, 443, 441, 109, 446, 
+	141, 432, 434, 435, 488, 459, 460, 413, 
+	415, 484, 107, 416, 418, 140, 483, 481, 
+	417, 139, 419, 477, 420, 422, 138, 476, 
+	474, 421, 137, 423, 470, 424, 426, 136, 
+	469, 467, 425, 135, 427, 463, 428, 430, 
+	134, 462, 458, 429, 133, 444, 433, 438, 
+	170, 436, 437, 440, 108, 443, 109, 446, 
 	112, 130, 449, 115, 127, 452, 118, 124, 
 	455, 121, 457, 464, 466, 471, 473, 478, 
 	480, 485, 487, 143, 492, 493, 507, 498, 
-	500, 525, 503, 494, 495, 496, 144, 506, 
-	497, 499, 502, 501, 504, 145, 509, 147, 
+	500, 501, 525, 494, 495, 496, 144, 506, 
+	497, 499, 504, 502, 503, 145, 509, 147, 
 	167, 156, 512, 150, 164, 515, 153, 161, 
 	518, 158, 521, 157, 524, 170, 527, 528, 
-	170, 530, 529, 532, 531
+	530, 531, 529, 534, 170, 532, 533
 };
 
 static const char _indic_syllable_machine_trans_actions[] = {
@@ -1353,52 +1261,52 @@ static const char _indic_syllable_machine_trans_actions[] = {
 	2, 0, 0, 2, 0, 2, 0, 0, 
 	0, 0, 2, 0, 0, 2, 0, 0, 
 	2, 0, 0, 2, 11, 2, 2, 6, 
-	2, 12, 12, 0, 13, 0, 2, 2, 
-	6, 2, 6, 0, 6, 14, 2, 2, 
-	0, 2, 0, 15, 0, 2, 2, 0, 
-	2, 2, 0, 2, 2, 0, 2, 2, 
+	2, 12, 12, 0, 0, 0, 2, 2, 
+	6, 2, 6, 0, 6, 13, 2, 2, 
+	0, 2, 0, 0, 0, 2, 2, 2, 
+	2, 0, 2, 2, 0, 2, 2, 0, 
+	2, 2, 2, 0, 2, 2, 2, 2, 
 	0, 2, 2, 2, 0, 2, 2, 2, 
 	2, 0, 2, 2, 2, 0, 2, 2, 
 	2, 2, 0, 2, 2, 2, 0, 2, 
-	2, 2, 2, 0, 2, 2, 2, 0, 
-	2, 0, 0, 0, 0, 0, 2, 0, 
+	0, 0, 14, 0, 0, 0, 0, 2, 
 	0, 2, 0, 0, 2, 0, 0, 2, 
 	0, 0, 2, 0, 2, 2, 2, 2, 
-	2, 2, 2, 2, 2, 16, 2, 2, 
-	0, 2, 0, 17, 0, 2, 2, 0, 
-	2, 2, 0, 2, 2, 0, 2, 2, 
+	2, 2, 2, 2, 2, 15, 2, 2, 
+	0, 2, 0, 0, 0, 2, 2, 2, 
+	2, 0, 2, 2, 0, 2, 2, 0, 
+	2, 2, 2, 0, 2, 2, 2, 2, 
 	0, 2, 2, 2, 0, 2, 2, 2, 
 	2, 0, 2, 2, 2, 0, 2, 2, 
 	2, 2, 0, 2, 2, 2, 0, 2, 
-	2, 2, 2, 0, 2, 2, 2, 0, 
-	2, 0, 0, 0, 0, 0, 2, 0, 
+	0, 0, 16, 0, 0, 0, 0, 2, 
 	0, 2, 0, 0, 2, 0, 0, 2, 
 	0, 0, 2, 0, 2, 2, 2, 2, 
-	2, 2, 2, 2, 2, 18, 6, 0, 
-	0, 6, 6, 0, 6, 2, 0, 6, 
+	2, 2, 2, 2, 2, 17, 6, 0, 
+	6, 6, 0, 6, 2, 0, 6, 2, 
+	6, 0, 6, 6, 6, 2, 0, 6, 
 	2, 6, 0, 6, 6, 6, 2, 0, 
 	6, 2, 6, 0, 6, 6, 6, 2, 
-	0, 6, 2, 6, 0, 6, 6, 6, 
-	2, 0, 6, 2, 6, 0, 6, 0, 
-	0, 0, 0, 0, 2, 0, 0, 2, 
+	0, 6, 2, 6, 0, 6, 0, 0, 
+	18, 0, 0, 0, 0, 2, 0, 2, 
 	0, 0, 2, 0, 0, 2, 0, 0, 
 	2, 0, 2, 2, 2, 2, 2, 2, 
 	2, 2, 2, 19, 20, 2, 2, 0, 
-	0, 0, 21, 0, 2, 2, 0, 2, 
-	2, 2, 2, 0, 2, 2, 0, 2, 
+	0, 0, 0, 0, 2, 2, 2, 2, 
+	2, 2, 0, 2, 2, 0, 2, 2, 
+	2, 0, 2, 2, 2, 2, 0, 2, 
 	2, 2, 0, 2, 2, 2, 2, 0, 
 	2, 2, 2, 0, 2, 2, 2, 2, 
-	0, 2, 2, 2, 0, 2, 2, 2, 
-	2, 0, 2, 2, 2, 0, 2, 0, 
-	0, 0, 0, 0, 2, 0, 0, 2, 
+	0, 2, 2, 2, 0, 2, 0, 0, 
+	21, 0, 0, 0, 0, 2, 0, 2, 
 	0, 0, 2, 0, 0, 2, 0, 0, 
 	2, 0, 2, 2, 2, 2, 2, 2, 
 	2, 2, 2, 0, 0, 8, 2, 0, 
-	0, 2, 0, 2, 8, 8, 0, 8, 
+	0, 0, 2, 2, 8, 8, 0, 8, 
 	8, 0, 0, 0, 0, 0, 2, 0, 
 	0, 0, 2, 0, 0, 2, 0, 0, 
 	2, 0, 0, 0, 2, 22, 0, 0, 
-	23, 0, 0, 0, 0
+	0, 0, 0, 0, 23, 0, 0
 };
 
 static const char _indic_syllable_machine_to_state_actions[] = {
@@ -1468,7 +1376,7 @@ static const char _indic_syllable_machine_to_state_actions[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 
 	0, 0, 0, 0, 0, 0, 0, 0, 
 	0, 0, 0, 0, 0, 0, 0, 0, 
-	0, 0, 0, 0, 0
+	0, 0, 0, 0, 0, 0, 0
 };
 
 static const char _indic_syllable_machine_from_state_actions[] = {
@@ -1538,7 +1446,7 @@ static const char _indic_syllable_machine_from_state_actions[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 
 	0, 0, 0, 0, 0, 0, 0, 0, 
 	0, 0, 0, 0, 0, 0, 0, 0, 
-	0, 0, 0, 0, 0
+	0, 0, 0, 0, 0, 0, 0
 };
 
 static const short _indic_syllable_machine_eof_trans[] = {
@@ -1608,7 +1516,7 @@ static const short _indic_syllable_machine_eof_trans[] = {
 	198, 198, 198, 198, 198, 198, 198, 198, 
 	198, 198, 198, 198, 198, 198, 198, 198, 
 	198, 198, 198, 198, 198, 358, 542, 542, 
-	542, 542, 542, 542, 542
+	542, 542, 542, 542, 542, 542, 542
 };
 
 static const int indic_syllable_machine_start = 170;
@@ -1622,7 +1530,7 @@ static const int indic_syllable_machine_en_main = 170;
 
 
 
-#line 98 "hb-ot-shape-complex-indic-machine.rl"
+#line 97 "hb-ot-shape-complex-indic-machine.rl"
 
 
 #define found_syllable(syllable_type) \
@@ -1642,7 +1550,7 @@ find_syllables (hb_buffer_t *buffer)
   int cs;
   hb_glyph_info_t *info = buffer->info;
   
-#line 1646 "hb-ot-shape-complex-indic-machine.hh"
+#line 1554 "hb-ot-shape-complex-indic-machine.hh"
 	{
 	cs = indic_syllable_machine_start;
 	ts = 0;
@@ -1650,7 +1558,7 @@ find_syllables (hb_buffer_t *buffer)
 	act = 0;
 	}
 
-#line 119 "hb-ot-shape-complex-indic-machine.rl"
+#line 118 "hb-ot-shape-complex-indic-machine.rl"
 
 
   p = 0;
@@ -1659,7 +1567,7 @@ find_syllables (hb_buffer_t *buffer)
   unsigned int last = 0;
   unsigned int syllable_serial = 1;
   
-#line 1663 "hb-ot-shape-complex-indic-machine.hh"
+#line 1571 "hb-ot-shape-complex-indic-machine.hh"
 	{
 	int _slen;
 	int _trans;
@@ -1673,7 +1581,7 @@ _resume:
 #line 1 "NONE"
 	{ts = p;}
 	break;
-#line 1677 "hb-ot-shape-complex-indic-machine.hh"
+#line 1585 "hb-ot-shape-complex-indic-machine.hh"
 	}
 
 	_keys = _indic_syllable_machine_trans_keys + (cs<<1);
@@ -1695,68 +1603,68 @@ _eof_trans:
 #line 1 "NONE"
 	{te = p+1;}
 	break;
-	case 15:
-#line 89 "hb-ot-shape-complex-indic-machine.rl"
+	case 14:
+#line 88 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p+1;{ found_syllable (consonant_syllable); }}
 	break;
-	case 17:
-#line 90 "hb-ot-shape-complex-indic-machine.rl"
+	case 16:
+#line 89 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p+1;{ found_syllable (vowel_syllable); }}
 	break;
 	case 21:
-#line 91 "hb-ot-shape-complex-indic-machine.rl"
+#line 90 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p+1;{ found_syllable (standalone_cluster); }}
 	break;
 	case 23:
-#line 92 "hb-ot-shape-complex-indic-machine.rl"
-	{te = p+1;{ found_syllable (avagraha_cluster); }}
+#line 91 "hb-ot-shape-complex-indic-machine.rl"
+	{te = p+1;{ found_syllable (symbol_cluster); }}
 	break;
-	case 13:
-#line 93 "hb-ot-shape-complex-indic-machine.rl"
+	case 18:
+#line 92 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p+1;{ found_syllable (broken_cluster); }}
 	break;
 	case 11:
-#line 94 "hb-ot-shape-complex-indic-machine.rl"
+#line 93 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p+1;{ found_syllable (non_indic_cluster); }}
 	break;
-	case 14:
-#line 89 "hb-ot-shape-complex-indic-machine.rl"
+	case 13:
+#line 88 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p;p--;{ found_syllable (consonant_syllable); }}
 	break;
-	case 16:
-#line 90 "hb-ot-shape-complex-indic-machine.rl"
+	case 15:
+#line 89 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p;p--;{ found_syllable (vowel_syllable); }}
 	break;
 	case 20:
-#line 91 "hb-ot-shape-complex-indic-machine.rl"
+#line 90 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p;p--;{ found_syllable (standalone_cluster); }}
 	break;
 	case 22:
-#line 92 "hb-ot-shape-complex-indic-machine.rl"
-	{te = p;p--;{ found_syllable (avagraha_cluster); }}
+#line 91 "hb-ot-shape-complex-indic-machine.rl"
+	{te = p;p--;{ found_syllable (symbol_cluster); }}
 	break;
-	case 18:
-#line 93 "hb-ot-shape-complex-indic-machine.rl"
+	case 17:
+#line 92 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p;p--;{ found_syllable (broken_cluster); }}
 	break;
 	case 19:
-#line 94 "hb-ot-shape-complex-indic-machine.rl"
+#line 93 "hb-ot-shape-complex-indic-machine.rl"
 	{te = p;p--;{ found_syllable (non_indic_cluster); }}
 	break;
 	case 1:
-#line 89 "hb-ot-shape-complex-indic-machine.rl"
+#line 88 "hb-ot-shape-complex-indic-machine.rl"
 	{{p = ((te))-1;}{ found_syllable (consonant_syllable); }}
 	break;
 	case 3:
-#line 90 "hb-ot-shape-complex-indic-machine.rl"
+#line 89 "hb-ot-shape-complex-indic-machine.rl"
 	{{p = ((te))-1;}{ found_syllable (vowel_syllable); }}
 	break;
 	case 7:
-#line 91 "hb-ot-shape-complex-indic-machine.rl"
+#line 90 "hb-ot-shape-complex-indic-machine.rl"
 	{{p = ((te))-1;}{ found_syllable (standalone_cluster); }}
 	break;
 	case 4:
-#line 93 "hb-ot-shape-complex-indic-machine.rl"
+#line 92 "hb-ot-shape-complex-indic-machine.rl"
 	{{p = ((te))-1;}{ found_syllable (broken_cluster); }}
 	break;
 	case 5:
@@ -1777,22 +1685,22 @@ _eof_trans:
 	case 8:
 #line 1 "NONE"
 	{te = p+1;}
-#line 89 "hb-ot-shape-complex-indic-machine.rl"
+#line 88 "hb-ot-shape-complex-indic-machine.rl"
 	{act = 1;}
 	break;
 	case 6:
 #line 1 "NONE"
 	{te = p+1;}
-#line 93 "hb-ot-shape-complex-indic-machine.rl"
+#line 92 "hb-ot-shape-complex-indic-machine.rl"
 	{act = 5;}
 	break;
 	case 12:
 #line 1 "NONE"
 	{te = p+1;}
-#line 94 "hb-ot-shape-complex-indic-machine.rl"
+#line 93 "hb-ot-shape-complex-indic-machine.rl"
 	{act = 6;}
 	break;
-#line 1796 "hb-ot-shape-complex-indic-machine.hh"
+#line 1704 "hb-ot-shape-complex-indic-machine.hh"
 	}
 
 _again:
@@ -1801,7 +1709,7 @@ _again:
 #line 1 "NONE"
 	{ts = 0;}
 	break;
-#line 1805 "hb-ot-shape-complex-indic-machine.hh"
+#line 1713 "hb-ot-shape-complex-indic-machine.hh"
 	}
 
 	if ( ++p != pe )
@@ -1817,7 +1725,7 @@ _again:
 
 	}
 
-#line 128 "hb-ot-shape-complex-indic-machine.rl"
+#line 127 "hb-ot-shape-complex-indic-machine.rl"
 
 }
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-private.hh
index 3de5c203fa..d8dfc6507d 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-private.hh
@@ -53,17 +53,29 @@ enum indic_category_t {
   OT_SM = 8,
   OT_VD = 9,
   OT_A = 10,
-  OT_NBSP = 11,
+  OT_PLACEHOLDER = 11,
   OT_DOTTEDCIRCLE = 12,
   OT_RS = 13, /* Register Shifter, used in Khmer OT spec. */
   OT_Coeng = 14, /* Khmer-style Virama. */
   OT_Repha = 15, /* Atomically-encoded logical or visual repha. */
   OT_Ra = 16,
   OT_CM = 17,  /* Consonant-Medial. */
-  OT_Avag = 18, /* Avagraha. */
+  OT_Symbol = 18, /* Avagraha, etc that take marks (SM,A,VD). */
   OT_CM2 = 31 /* Consonant-Medial, second slot. */
 };
 
+#define MEDIAL_FLAGS (FLAG (OT_CM) | FLAG (OT_CM2))
+
+/* Note:
+ *
+ * We treat Vowels and placeholders as if they were consonants.  This is safe because Vowels
+ * cannot happen in a consonant syllable.  The plus side however is, we can call the
+ * consonant syllable logic from the vowel syllable function and get it all right! */
+#define CONSONANT_FLAGS (FLAG (OT_C) | FLAG (OT_Ra) | MEDIAL_FLAGS | FLAG (OT_V) | FLAG (OT_PLACEHOLDER) | FLAG (OT_DOTTEDCIRCLE))
+#define JOINER_FLAGS (FLAG (OT_ZWJ) | FLAG (OT_ZWNJ))
+#define HALANT_OR_COENG_FLAGS (FLAG (OT_H) | FLAG (OT_Coeng))
+
+
 /* Visual positions in a syllable from left to right. */
 enum indic_position_t {
   POS_START,
@@ -93,57 +105,74 @@ enum indic_position_t {
 
 /* Categories used in IndicSyllabicCategory.txt from UCD. */
 enum indic_syllabic_category_t {
-  INDIC_SYLLABIC_CATEGORY_OTHER			= OT_X,
-
-  INDIC_SYLLABIC_CATEGORY_AVAGRAHA		= OT_Avag,
-  INDIC_SYLLABIC_CATEGORY_BINDU			= OT_SM,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT		= OT_C,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_DEAD	= OT_C,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_FINAL	= OT_CM,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_HEAD_LETTER	= OT_C,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_MEDIAL	= OT_CM,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_PLACEHOLDER	= OT_NBSP,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_SUBJOINED	= OT_CM,
-  INDIC_SYLLABIC_CATEGORY_CONSONANT_REPHA	= OT_Repha,
-  INDIC_SYLLABIC_CATEGORY_MODIFYING_LETTER	= OT_X,
-  INDIC_SYLLABIC_CATEGORY_NUKTA			= OT_N,
-  INDIC_SYLLABIC_CATEGORY_REGISTER_SHIFTER	= OT_RS,
-  INDIC_SYLLABIC_CATEGORY_TONE_LETTER		= OT_X,
-  INDIC_SYLLABIC_CATEGORY_TONE_MARK		= OT_N,
-  INDIC_SYLLABIC_CATEGORY_VIRAMA		= OT_H,
-  INDIC_SYLLABIC_CATEGORY_VISARGA		= OT_SM,
-  INDIC_SYLLABIC_CATEGORY_VOWEL			= OT_V,
-  INDIC_SYLLABIC_CATEGORY_VOWEL_DEPENDENT	= OT_M,
-  INDIC_SYLLABIC_CATEGORY_VOWEL_INDEPENDENT	= OT_V
+  INDIC_SYLLABIC_CATEGORY_OTHER				= OT_X,
+
+  INDIC_SYLLABIC_CATEGORY_AVAGRAHA			= OT_Symbol,
+  INDIC_SYLLABIC_CATEGORY_BINDU				= OT_SM,
+  INDIC_SYLLABIC_CATEGORY_BRAHMI_JOINING_NUMBER		= OT_PLACEHOLDER, /* TODO */
+  INDIC_SYLLABIC_CATEGORY_CANTILLATION_MARK		= OT_A,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT			= OT_C,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_DEAD		= OT_C,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_FINAL		= OT_CM,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_HEAD_LETTER		= OT_C,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_MEDIAL		= OT_CM,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_PLACEHOLDER		= OT_PLACEHOLDER,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_PRECEDING_REPHA	= OT_Repha,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_SUBJOINED		= OT_CM,
+  INDIC_SYLLABIC_CATEGORY_CONSONANT_SUCCEEDING_REPHA	= OT_N,
+  INDIC_SYLLABIC_CATEGORY_GEMINATION_MARK		= OT_SM,
+  INDIC_SYLLABIC_CATEGORY_INVISIBLE_STACKER		= OT_H, /* TODO */
+  INDIC_SYLLABIC_CATEGORY_JOINER			= OT_ZWJ,
+  INDIC_SYLLABIC_CATEGORY_MODIFYING_LETTER		= OT_X,
+  INDIC_SYLLABIC_CATEGORY_NON_JOINER			= OT_ZWNJ,
+  INDIC_SYLLABIC_CATEGORY_NUKTA				= OT_N,
+  INDIC_SYLLABIC_CATEGORY_NUMBER			= OT_PLACEHOLDER,
+  INDIC_SYLLABIC_CATEGORY_NUMBER_JOINER			= OT_PLACEHOLDER, /* TODO */
+  INDIC_SYLLABIC_CATEGORY_PURE_KILLER			= OT_H, /* TODO */
+  INDIC_SYLLABIC_CATEGORY_REGISTER_SHIFTER		= OT_RS,
+  INDIC_SYLLABIC_CATEGORY_TONE_LETTER			= OT_X,
+  INDIC_SYLLABIC_CATEGORY_TONE_MARK			= OT_N,
+  INDIC_SYLLABIC_CATEGORY_VIRAMA			= OT_H,
+  INDIC_SYLLABIC_CATEGORY_VISARGA			= OT_SM,
+  INDIC_SYLLABIC_CATEGORY_VOWEL				= OT_V,
+  INDIC_SYLLABIC_CATEGORY_VOWEL_DEPENDENT		= OT_M,
+  INDIC_SYLLABIC_CATEGORY_VOWEL_INDEPENDENT		= OT_V
 };
 
 /* Categories used in IndicSMatraCategory.txt from UCD */
 enum indic_matra_category_t {
-  INDIC_MATRA_CATEGORY_NOT_APPLICABLE		= POS_END,
+  INDIC_MATRA_CATEGORY_NOT_APPLICABLE			= POS_END,
 
-  INDIC_MATRA_CATEGORY_LEFT			= POS_PRE_C,
-  INDIC_MATRA_CATEGORY_TOP			= POS_ABOVE_C,
-  INDIC_MATRA_CATEGORY_BOTTOM			= POS_BELOW_C,
-  INDIC_MATRA_CATEGORY_RIGHT			= POS_POST_C,
+  INDIC_MATRA_CATEGORY_LEFT				= POS_PRE_C,
+  INDIC_MATRA_CATEGORY_TOP				= POS_ABOVE_C,
+  INDIC_MATRA_CATEGORY_BOTTOM				= POS_BELOW_C,
+  INDIC_MATRA_CATEGORY_RIGHT				= POS_POST_C,
 
   /* These should resolve to the position of the last part of the split sequence. */
-  INDIC_MATRA_CATEGORY_BOTTOM_AND_RIGHT		= INDIC_MATRA_CATEGORY_RIGHT,
-  INDIC_MATRA_CATEGORY_LEFT_AND_RIGHT		= INDIC_MATRA_CATEGORY_RIGHT,
-  INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM		= INDIC_MATRA_CATEGORY_BOTTOM,
-  INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM_AND_RIGHT	= INDIC_MATRA_CATEGORY_RIGHT,
-  INDIC_MATRA_CATEGORY_TOP_AND_LEFT		= INDIC_MATRA_CATEGORY_TOP,
-  INDIC_MATRA_CATEGORY_TOP_AND_LEFT_AND_RIGHT	= INDIC_MATRA_CATEGORY_RIGHT,
-  INDIC_MATRA_CATEGORY_TOP_AND_RIGHT		= INDIC_MATRA_CATEGORY_RIGHT,
-
-  INDIC_MATRA_CATEGORY_INVISIBLE		= INDIC_MATRA_CATEGORY_NOT_APPLICABLE,
-  INDIC_MATRA_CATEGORY_OVERSTRUCK		= POS_AFTER_MAIN,
-  INDIC_MATRA_CATEGORY_VISUAL_ORDER_LEFT	= POS_PRE_M
+  INDIC_MATRA_CATEGORY_BOTTOM_AND_RIGHT			= INDIC_MATRA_CATEGORY_RIGHT,
+  INDIC_MATRA_CATEGORY_LEFT_AND_RIGHT			= INDIC_MATRA_CATEGORY_RIGHT,
+  INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM			= INDIC_MATRA_CATEGORY_BOTTOM,
+  INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM_AND_RIGHT		= INDIC_MATRA_CATEGORY_RIGHT,
+  INDIC_MATRA_CATEGORY_TOP_AND_LEFT			= INDIC_MATRA_CATEGORY_TOP,
+  INDIC_MATRA_CATEGORY_TOP_AND_LEFT_AND_RIGHT		= INDIC_MATRA_CATEGORY_RIGHT,
+  INDIC_MATRA_CATEGORY_TOP_AND_RIGHT			= INDIC_MATRA_CATEGORY_RIGHT,
+
+  INDIC_MATRA_CATEGORY_OVERSTRUCK			= POS_AFTER_MAIN,
+  INDIC_MATRA_CATEGORY_VISUAL_ORDER_LEFT		= POS_PRE_M
 };
 
 /* Note: We use ASSERT_STATIC_EXPR_ZERO() instead of ASSERT_STATIC_EXPR() and the comma operation
  * because gcc fails to optimize the latter and fills the table in at runtime. */
 #define INDIC_COMBINE_CATEGORIES(S,M) \
-  (ASSERT_STATIC_EXPR_ZERO (M == INDIC_MATRA_CATEGORY_NOT_APPLICABLE || (S == INDIC_SYLLABIC_CATEGORY_VIRAMA || S == INDIC_SYLLABIC_CATEGORY_VOWEL_DEPENDENT)) + \
+  (ASSERT_STATIC_EXPR_ZERO (M == INDIC_MATRA_CATEGORY_NOT_APPLICABLE || \
+			    ( \
+			     S == INDIC_SYLLABIC_CATEGORY_CONSONANT_MEDIAL || \
+			     S == INDIC_SYLLABIC_CATEGORY_GEMINATION_MARK || \
+			     S == INDIC_SYLLABIC_CATEGORY_REGISTER_SHIFTER || \
+			     S == INDIC_SYLLABIC_CATEGORY_CONSONANT_SUCCEEDING_REPHA || \
+			     S == INDIC_SYLLABIC_CATEGORY_VIRAMA || \
+			     S == INDIC_SYLLABIC_CATEGORY_VOWEL_DEPENDENT || \
+			     false)) + \
    ASSERT_STATIC_EXPR_ZERO (S < 255 && M < 255) + \
    ((M << 8) | S))
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-table.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-table.cc
index 18a022bc50..f58380e0c8 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-table.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic-table.cc
@@ -6,54 +6,63 @@
  *
  * on files with these headers:
  *
- * # IndicSyllabicCategory-6.2.0.txt
- * # Date: 2012-05-15, 21:12:00 GMT [KW]
- * # IndicMatraCategory-6.2.0.txt
- * # Date: 2012-05-15, 21:10:00 GMT [KW]
- * # Blocks-6.2.0.txt
- * # Date: 2012-05-14, 22:42:00 GMT [KW, LI]
+ * # IndicSyllabicCategory-7.0.0.txt
+ * # Date: 2014-06-03, 07:00:00 GMT [KW, LI, AG, RP]
+ * # IndicMatraCategory-7.0.0.txt
+ * # Date: 2014-06-03, 07:00:00 GMT [KW, LI, AG, RP]
+ * # Blocks-7.0.0.txt
+ * # Date: 2014-04-03, 23:23:00 GMT [RP, KW]
  */
 
 #include "hb-ot-shape-complex-indic-private.hh"
 
 
-#define ISC_A	INDIC_SYLLABIC_CATEGORY_AVAGRAHA		/*  11 chars; Avagraha */
-#define ISC_Bi	INDIC_SYLLABIC_CATEGORY_BINDU			/*  34 chars; Bindu */
-#define ISC_C	INDIC_SYLLABIC_CATEGORY_CONSONANT		/* 123 chars; Consonant */
-#define ISC_CD	INDIC_SYLLABIC_CATEGORY_CONSONANT_DEAD		/*   2 chars; Consonant_Dead */
-#define ISC_CF	INDIC_SYLLABIC_CATEGORY_CONSONANT_FINAL		/*  17 chars; Consonant_Final */
-#define ISC_CHL	INDIC_SYLLABIC_CATEGORY_CONSONANT_HEAD_LETTER	/*   1 chars; Consonant_Head_Letter */
-#define ISC_CM	INDIC_SYLLABIC_CATEGORY_CONSONANT_MEDIAL	/*  12 chars; Consonant_Medial */
-#define ISC_CP	INDIC_SYLLABIC_CATEGORY_CONSONANT_PLACEHOLDER	/*   4 chars; Consonant_Placeholder */
-#define ISC_CR	INDIC_SYLLABIC_CATEGORY_CONSONANT_REPHA		/*   5 chars; Consonant_Repha */
-#define ISC_CS	INDIC_SYLLABIC_CATEGORY_CONSONANT_SUBJOINED	/*  10 chars; Consonant_Subjoined */
+#define ISC_A	INDIC_SYLLABIC_CATEGORY_AVAGRAHA		/*  13 chars; Avagraha */
+#define ISC_Bi	INDIC_SYLLABIC_CATEGORY_BINDU			/*  59 chars; Bindu */
+#define ISC_BJN	INDIC_SYLLABIC_CATEGORY_BRAHMI_JOINING_NUMBER	/*  20 chars; Brahmi_Joining_Number */
+#define ISC_Ca	INDIC_SYLLABIC_CATEGORY_CANTILLATION_MARK	/*  30 chars; Cantillation_Mark */
+#define ISC_C	INDIC_SYLLABIC_CATEGORY_CONSONANT		/* 1744 chars; Consonant */
+#define ISC_CD	INDIC_SYLLABIC_CATEGORY_CONSONANT_DEAD		/*   7 chars; Consonant_Dead */
+#define ISC_CF	INDIC_SYLLABIC_CATEGORY_CONSONANT_FINAL		/*  61 chars; Consonant_Final */
+#define ISC_CHL	INDIC_SYLLABIC_CATEGORY_CONSONANT_HEAD_LETTER	/*   5 chars; Consonant_Head_Letter */
+#define ISC_CM	INDIC_SYLLABIC_CATEGORY_CONSONANT_MEDIAL	/*  19 chars; Consonant_Medial */
+#define ISC_CP	INDIC_SYLLABIC_CATEGORY_CONSONANT_PLACEHOLDER	/*  11 chars; Consonant_Placeholder */
+#define ISC_CPR	INDIC_SYLLABIC_CATEGORY_CONSONANT_PRECEDING_REPHA	/*   1 chars; Consonant_Preceding_Repha */
+#define ISC_CS	INDIC_SYLLABIC_CATEGORY_CONSONANT_SUBJOINED	/*  61 chars; Consonant_Subjoined */
+#define ISC_CSR	INDIC_SYLLABIC_CATEGORY_CONSONANT_SUCCEEDING_REPHA	/*   4 chars; Consonant_Succeeding_Repha */
+#define ISC_GM	INDIC_SYLLABIC_CATEGORY_GEMINATION_MARK		/*   2 chars; Gemination_Mark */
+#define ISC_IS	INDIC_SYLLABIC_CATEGORY_INVISIBLE_STACKER	/*   7 chars; Invisible_Stacker */
+#define ISC_ZWJ	INDIC_SYLLABIC_CATEGORY_JOINER			/*   1 chars; Joiner */
 #define ISC_ML	INDIC_SYLLABIC_CATEGORY_MODIFYING_LETTER	/*   1 chars; Modifying_Letter */
-#define ISC_N	INDIC_SYLLABIC_CATEGORY_NUKTA			/*  12 chars; Nukta */
+#define ISC_ZWNJ	INDIC_SYLLABIC_CATEGORY_NON_JOINER		/*   1 chars; Non_Joiner */
+#define ISC_N	INDIC_SYLLABIC_CATEGORY_NUKTA			/*  18 chars; Nukta */
+#define ISC_Nd	INDIC_SYLLABIC_CATEGORY_NUMBER			/* 408 chars; Number */
+#define ISC_NJ	INDIC_SYLLABIC_CATEGORY_NUMBER_JOINER		/*   1 chars; Number_Joiner */
 #define ISC_x	INDIC_SYLLABIC_CATEGORY_OTHER			/*   1 chars; Other */
-#define ISC_RS	INDIC_SYLLABIC_CATEGORY_REGISTER_SHIFTER	/*   1 chars; Register_Shifter */
-#define ISC_TL	INDIC_SYLLABIC_CATEGORY_TONE_LETTER		/*   3 chars; Tone_Letter */
-#define ISC_TM	INDIC_SYLLABIC_CATEGORY_TONE_MARK		/*  16 chars; Tone_Mark */
-#define ISC_V	INDIC_SYLLABIC_CATEGORY_VIRAMA			/*  34 chars; Virama */
-#define ISC_Vs	INDIC_SYLLABIC_CATEGORY_VISARGA			/*  25 chars; Visarga */
-#define ISC_Vo	INDIC_SYLLABIC_CATEGORY_VOWEL			/*   5 chars; Vowel */
-#define ISC_M	INDIC_SYLLABIC_CATEGORY_VOWEL_DEPENDENT		/* 165 chars; Vowel_Dependent */
-#define ISC_VI	INDIC_SYLLABIC_CATEGORY_VOWEL_INDEPENDENT	/*  59 chars; Vowel_Independent */
-
-#define IMC_B	INDIC_MATRA_CATEGORY_BOTTOM			/*  65 chars; Bottom */
+#define ISC_PK	INDIC_SYLLABIC_CATEGORY_PURE_KILLER		/*  15 chars; Pure_Killer */
+#define ISC_RS	INDIC_SYLLABIC_CATEGORY_REGISTER_SHIFTER	/*   3 chars; Register_Shifter */
+#define ISC_TL	INDIC_SYLLABIC_CATEGORY_TONE_LETTER		/*   7 chars; Tone_Letter */
+#define ISC_TM	INDIC_SYLLABIC_CATEGORY_TONE_MARK		/*  62 chars; Tone_Mark */
+#define ISC_V	INDIC_SYLLABIC_CATEGORY_VIRAMA			/*  22 chars; Virama */
+#define ISC_Vs	INDIC_SYLLABIC_CATEGORY_VISARGA			/*  29 chars; Visarga */
+#define ISC_Vo	INDIC_SYLLABIC_CATEGORY_VOWEL			/*  30 chars; Vowel */
+#define ISC_M	INDIC_SYLLABIC_CATEGORY_VOWEL_DEPENDENT		/* 553 chars; Vowel_Dependent */
+#define ISC_VI	INDIC_SYLLABIC_CATEGORY_VOWEL_INDEPENDENT	/* 395 chars; Vowel_Independent */
+
+#define IMC_B	INDIC_MATRA_CATEGORY_BOTTOM			/* 142 chars; Bottom */
 #define IMC_BR	INDIC_MATRA_CATEGORY_BOTTOM_AND_RIGHT		/*   2 chars; Bottom_And_Right */
-#define IMC_I	INDIC_MATRA_CATEGORY_INVISIBLE			/*   6 chars; Invisible */
-#define IMC_L	INDIC_MATRA_CATEGORY_LEFT			/*  30 chars; Left */
-#define IMC_LR	INDIC_MATRA_CATEGORY_LEFT_AND_RIGHT		/*   8 chars; Left_And_Right */
+#define IMC_L	INDIC_MATRA_CATEGORY_LEFT			/*  57 chars; Left */
+#define IMC_LR	INDIC_MATRA_CATEGORY_LEFT_AND_RIGHT		/*  21 chars; Left_And_Right */
 #define IMC_x	INDIC_MATRA_CATEGORY_NOT_APPLICABLE		/*   1 chars; Not_Applicable */
 #define IMC_O	INDIC_MATRA_CATEGORY_OVERSTRUCK			/*   2 chars; Overstruck */
-#define IMC_R	INDIC_MATRA_CATEGORY_RIGHT			/*  75 chars; Right */
-#define IMC_T	INDIC_MATRA_CATEGORY_TOP			/*  83 chars; Top */
-#define IMC_TB	INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM		/*   6 chars; Top_And_Bottom */
+#define IMC_R	INDIC_MATRA_CATEGORY_RIGHT			/* 163 chars; Right */
+#define IMC_T	INDIC_MATRA_CATEGORY_TOP			/* 169 chars; Top */
+#define IMC_TB	INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM		/*  10 chars; Top_And_Bottom */
 #define IMC_TBR	INDIC_MATRA_CATEGORY_TOP_AND_BOTTOM_AND_RIGHT	/*   1 chars; Top_And_Bottom_And_Right */
-#define IMC_TL	INDIC_MATRA_CATEGORY_TOP_AND_LEFT		/*   4 chars; Top_And_Left */
-#define IMC_TLR	INDIC_MATRA_CATEGORY_TOP_AND_LEFT_AND_RIGHT	/*   2 chars; Top_And_Left_And_Right */
-#define IMC_TR	INDIC_MATRA_CATEGORY_TOP_AND_RIGHT		/*   8 chars; Top_And_Right */
-#define IMC_VOL	INDIC_MATRA_CATEGORY_VISUAL_ORDER_LEFT		/*   5 chars; Visual_Order_Left */
+#define IMC_TL	INDIC_MATRA_CATEGORY_TOP_AND_LEFT		/*   6 chars; Top_And_Left */
+#define IMC_TLR	INDIC_MATRA_CATEGORY_TOP_AND_LEFT_AND_RIGHT	/*   4 chars; Top_And_Left_And_Right */
+#define IMC_TR	INDIC_MATRA_CATEGORY_TOP_AND_RIGHT		/*  13 chars; Top_And_Right */
+#define IMC_VOL	INDIC_MATRA_CATEGORY_VISUAL_ORDER_LEFT		/*  15 chars; Visual_Order_Left */
 
 #define _(S,M) INDIC_COMBINE_CATEGORIES (ISC_##S, IMC_##M)
 
@@ -61,10 +70,26 @@
 static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
 
 
-#define indic_offset_0x0900 0
+#define indic_offset_0x0028u 0
 
 
-  /* Devanagari  (0900..097F) */
+  /* Basic Latin */
+
+  /* 0028 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(CP,x),  _(x,x),  _(x,x),
+  /* 0030 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 0038 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+#define indic_offset_0x00d0u 24
+
+
+  /* Latin-1 Supplement */
+
+  /* 00D0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(CP,x),
+
+#define indic_offset_0x0900u 32
+
+
+  /* Devanagari */
 
   /* 0900 */ _(Bi,x), _(Bi,x), _(Bi,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0908 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
@@ -76,14 +101,14 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0938 */  _(C,x),  _(C,x),  _(M,T),  _(M,R),  _(N,x),  _(A,x),  _(M,R),  _(M,L),
   /* 0940 */  _(M,R),  _(M,B),  _(M,B),  _(M,B),  _(M,B),  _(M,T),  _(M,T),  _(M,T),
   /* 0948 */  _(M,T),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(V,B),  _(M,L),  _(M,R),
-  /* 0950 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,T),  _(M,B),  _(M,B),
+  /* 0950 */  _(x,x), _(TM,x), _(TM,x),  _(x,x),  _(x,x),  _(M,T),  _(M,B),  _(M,B),
   /* 0958 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0960 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0968 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0960 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0968 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0970 */  _(x,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
-  /* 0978 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 0978 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
 
-  /* Bengali  (0980..09FF) */
+  /* Bengali */
 
   /* 0980 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0988 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x),  _(x,x), _(VI,x),
@@ -97,12 +122,12 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 09C8 */  _(M,L),  _(x,x),  _(x,x), _(M,LR), _(M,LR),  _(V,B), _(CD,x),  _(x,x),
   /* 09D0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,R),
   /* 09D8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),
-  /* 09E0 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 09E8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 09E0 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 09E8 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 09F0 */  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 09F8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Gurmukhi  (0A00..0A7F) */
+  /* Gurmukhi */
 
   /* 0A00 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0A08 */ _(VI,x), _(VI,x), _(VI,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(VI,x),
@@ -116,12 +141,12 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0A48 */  _(M,T),  _(x,x),  _(x,x),  _(M,T),  _(M,T),  _(V,B),  _(x,x),  _(x,x),
   /* 0A50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0A58 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(x,x),
-  /* 0A60 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0A68 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0A70 */ _(Bi,x),  _(x,x), _(CP,x), _(CP,x),  _(x,x), _(CM,x),  _(x,x),  _(x,x),
+  /* 0A60 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0A68 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 0A70 */ _(Bi,x), _(GM,T), _(CP,x), _(CP,x),  _(x,x), _(CM,x),  _(x,x),  _(x,x),
   /* 0A78 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Gujarati  (0A80..0AFF) */
+  /* Gujarati */
 
   /* 0A80 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0A88 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x), _(VI,x),
@@ -135,12 +160,12 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0AC8 */  _(M,T), _(M,TR),  _(x,x),  _(M,R),  _(M,R),  _(V,B),  _(x,x),  _(x,x),
   /* 0AD0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0AD8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0AE0 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0AE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0AE0 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0AE8 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0AF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0AF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Oriya  (0B00..0B7F) */
+  /* Oriya */
 
   /* 0B00 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0B08 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x),  _(x,x), _(VI,x),
@@ -154,12 +179,12 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0B48 */ _(M,TL),  _(x,x),  _(x,x), _(M,LR),_(M,TLR),  _(V,B),  _(x,x),  _(x,x),
   /* 0B50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,T), _(M,TR),
   /* 0B58 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),
-  /* 0B60 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0B68 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0B60 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0B68 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0B70 */  _(x,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0B78 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Tamil  (0B80..0BFF) */
+  /* Tamil */
 
   /* 0B80 */  _(x,x),  _(x,x), _(Bi,x), _(ML,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0B88 */ _(VI,x), _(VI,x), _(VI,x),  _(x,x),  _(x,x),  _(x,x), _(VI,x), _(VI,x),
@@ -173,33 +198,33 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0BC8 */  _(M,L),  _(x,x), _(M,LR), _(M,LR), _(M,LR),  _(V,T),  _(x,x),  _(x,x),
   /* 0BD0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,R),
   /* 0BD8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0BE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0BE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0BE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0BE8 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0BF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0BF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Telugu  (0C00..0C7F) */
+  /* Telugu */
 
-  /* 0C00 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 0C00 */ _(Bi,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0C08 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x), _(VI,x), _(VI,x),
   /* 0C10 */ _(VI,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0C18 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0C20 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0C28 */  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0C30 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 0C30 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0C38 */  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(A,x),  _(M,T),  _(M,T),
   /* 0C40 */  _(M,T),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(x,x),  _(M,T),  _(M,T),
   /* 0C48 */ _(M,TB),  _(x,x),  _(M,T),  _(M,T),  _(M,T),  _(V,T),  _(x,x),  _(x,x),
   /* 0C50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,T),  _(M,B),  _(x,x),
   /* 0C58 */  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0C60 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0C68 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0C60 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0C68 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0C70 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0C78 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Kannada  (0C80..0CFF) */
+  /* Kannada */
 
-  /* 0C80 */  _(x,x),  _(x,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 0C80 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0C88 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x), _(VI,x), _(VI,x),
   /* 0C90 */ _(VI,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0C98 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -211,14 +236,14 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0CC8 */ _(M,TR),  _(x,x), _(M,TR), _(M,TR),  _(M,T),  _(V,T),  _(x,x),  _(x,x),
   /* 0CD0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,R),  _(M,R),  _(x,x),
   /* 0CD8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(x,x),
-  /* 0CE0 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0CE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0CE0 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0CE8 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0CF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0CF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Malayalam  (0D00..0D7F) */
+  /* Malayalam */
 
-  /* 0D00 */  _(x,x),  _(x,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 0D00 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0D08 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x), _(VI,x), _(VI,x),
   /* 0D10 */ _(VI,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0D18 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -227,15 +252,15 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0D30 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 0D38 */  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(A,x),  _(M,R),  _(M,R),
   /* 0D40 */  _(M,R),  _(M,R),  _(M,R),  _(M,B),  _(M,B),  _(x,x),  _(M,L),  _(M,L),
-  /* 0D48 */  _(M,L),  _(x,x), _(M,LR), _(M,LR), _(M,LR),  _(V,T), _(CR,x),  _(x,x),
+  /* 0D48 */  _(M,L),  _(x,x), _(M,LR), _(M,LR), _(M,LR),  _(V,T),_(CPR,x),  _(x,x),
   /* 0D50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,R),
   /* 0D58 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0D60 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0D68 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0D60 */ _(VI,x), _(VI,x),  _(M,B),  _(M,B),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0D68 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0D70 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 0D78 */  _(x,x),  _(x,x), _(CD,x), _(CD,x), _(CD,x), _(CD,x), _(CD,x), _(CD,x),
 
-  /* Sinhala  (0D80..0DFF) */
+  /* Sinhala */
 
   /* 0D80 */  _(x,x),  _(x,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 0D88 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
@@ -248,86 +273,15 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 0DC0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),
   /* 0DC8 */  _(x,x),  _(x,x),  _(V,T),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,R),
   /* 0DD0 */  _(M,R),  _(M,R),  _(M,T),  _(M,T),  _(M,B),  _(x,x),  _(M,B),  _(x,x),
-  /* 0DD8 */  _(M,R),  _(M,L), _(M,TL),  _(M,L), _(M,LR), _(M,LR), _(M,LR),  _(M,R),
-  /* 0DE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0DE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 0DD8 */  _(M,R),  _(M,L), _(M,TL),  _(M,L), _(M,LR),_(M,TLR), _(M,LR),  _(M,R),
+  /* 0DE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 0DE8 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 0DF0 */  _(x,x),  _(x,x),  _(M,R),  _(M,R),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0DF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* Thai  (0E00..0E7F) */
-
-  /* 0E00 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0E08 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0E10 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0E18 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0E20 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0E28 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),
-  /* 0E30 */  _(M,R),  _(M,T),  _(M,R),  _(M,R),  _(M,T),  _(M,T),  _(M,T),  _(M,T),
-  /* 0E38 */  _(M,B),  _(M,B),  _(V,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0E40 */_(M,VOL),_(M,VOL),_(M,VOL),_(M,VOL),_(M,VOL),  _(M,R),  _(x,x),  _(M,T),
-  /* 0E48 */ _(TM,x), _(TM,x), _(TM,x), _(TM,x),  _(x,x), _(Bi,x),  _(V,T),  _(x,x),
-  /* 0E50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0E58 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0E60 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0E68 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0E70 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0E78 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* Lao  (0E80..0EFF) */
-
-  /* 0E80 */  _(x,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(x,x),  _(x,x),  _(C,x),
-  /* 0E88 */  _(C,x),  _(x,x),  _(C,x),  _(x,x),  _(x,x),  _(C,x),  _(x,x),  _(x,x),
-  /* 0E90 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0E98 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0EA0 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(x,x),  _(C,x),
-  /* 0EA8 */  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(x,x),
-  /* 0EB0 */  _(M,R),  _(M,T),  _(M,R),  _(M,R),  _(M,T),  _(M,T),  _(M,T),  _(M,T),
-  /* 0EB8 */  _(M,B),  _(M,B),  _(x,x),  _(M,T), _(CM,x), _(CM,x),  _(x,x),  _(x,x),
-  /* 0EC0 */_(M,VOL),_(M,VOL),_(M,VOL),_(M,VOL),_(M,VOL),  _(x,x),  _(x,x),  _(x,x),
-  /* 0EC8 */ _(TM,x), _(TM,x), _(TM,x), _(TM,x),  _(x,x), _(Bi,x),  _(x,x),  _(x,x),
-  /* 0ED0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0ED8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),
-  /* 0EE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0EE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0EF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0EF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* Tibetan  (0F00..0FFF) */
-
-  /* 0F00 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F08 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F10 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F18 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F20 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F28 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F30 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F38 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F40 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0F48 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0F50 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0F58 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0F60 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 0F68 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0F70 */  _(x,x),  _(M,B),  _(M,T), _(M,TB),  _(M,B),  _(M,B), _(M,TB), _(M,TB),
-  /* 0F78 */ _(M,TB), _(M,TB),  _(M,T),  _(M,T),  _(M,T),  _(M,T), _(Bi,x), _(Vs,x),
-  /* 0F80 */  _(M,T), _(M,TB), _(Bi,x), _(Bi,x),  _(V,B),  _(A,x),  _(x,x),  _(x,x),
-  /* 0F88 */_(CHL,x),_(CHL,x),_(CHL,x),_(CHL,x),_(CHL,x), _(CS,x), _(CS,x), _(CS,x),
-  /* 0F90 */ _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x),
-  /* 0F98 */  _(x,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x),
-  /* 0FA0 */ _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x),
-  /* 0FA8 */ _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x),
-  /* 0FB0 */ _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x),
-  /* 0FB8 */ _(CS,x), _(CS,x), _(CS,x), _(CS,x), _(CS,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FC0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FC8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FD0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FD8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 0FF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* Myanmar  (1000..109F) */
+
+#define indic_offset_0x1000u 1304
+
+
+  /* Myanmar */
 
   /* 1000 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1008 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -336,9 +290,9 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 1020 */  _(C,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 1028 */ _(VI,x), _(VI,x), _(VI,x),  _(M,R),  _(M,R),  _(M,T),  _(M,T),  _(M,B),
   /* 1030 */  _(M,B),  _(M,L),  _(M,T),  _(M,T),  _(M,T),  _(M,T), _(Bi,x), _(TM,x),
-  /* 1038 */ _(Vs,x),  _(V,I),  _(V,T), _(CM,x), _(CM,x), _(CM,x), _(CM,x),  _(C,x),
-  /* 1040 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1048 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1038 */ _(Vs,x), _(IS,x), _(PK,T), _(CM,x), _(CM,x), _(CM,x), _(CM,x),  _(C,x),
+  /* 1040 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1048 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(CP,x),  _(x,x),
   /* 1050 */  _(C,x),  _(C,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(M,R),  _(M,R),
   /* 1058 */  _(M,B),  _(M,B),  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(CM,x), _(CM,x),
   /* 1060 */ _(CM,x),  _(C,x),  _(M,R), _(TM,x), _(TM,x),  _(C,x),  _(C,x),  _(M,R),
@@ -347,41 +301,41 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 1078 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1080 */  _(C,x),  _(C,x), _(CM,x),  _(M,R),  _(M,L),  _(M,T),  _(M,T), _(TM,x),
   /* 1088 */ _(TM,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x),  _(C,x), _(TM,x),
-  /* 1090 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1098 */  _(x,x),  _(x,x), _(TM,x), _(TM,x),  _(M,R),  _(M,T),  _(x,x),  _(x,x),
+  /* 1090 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1098 */ _(Nd,x), _(Nd,x), _(TM,x), _(TM,x),  _(M,R),  _(M,T),  _(x,x),  _(x,x),
 
-#define indic_offset_0x1700 1952
+#define indic_offset_0x1700u 1464
 
 
-  /* Tagalog  (1700..171F) */
+  /* Tagalog */
 
   /* 1700 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1708 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(C,x),
-  /* 1710 */  _(C,x),  _(C,x),  _(M,T),  _(M,B),  _(V,B),  _(x,x),  _(x,x),  _(x,x),
+  /* 1710 */  _(C,x),  _(C,x),  _(M,T),  _(M,B), _(PK,B),  _(x,x),  _(x,x),  _(x,x),
   /* 1718 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Hanunoo  (1720..173F) */
+  /* Hanunoo */
 
   /* 1720 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1728 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 1730 */  _(C,x),  _(C,x),  _(M,T),  _(M,B),  _(V,B),  _(x,x),  _(x,x),  _(x,x),
+  /* 1730 */  _(C,x),  _(C,x),  _(M,T),  _(M,B), _(PK,B),  _(x,x),  _(x,x),  _(x,x),
   /* 1738 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Buhid  (1740..175F) */
+  /* Buhid */
 
   /* 1740 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1748 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1750 */  _(C,x),  _(C,x),  _(M,T),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1758 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Tagbanwa  (1760..177F) */
+  /* Tagbanwa */
 
   /* 1760 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1768 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(C,x),
   /* 1770 */  _(C,x),  _(x,x),  _(M,T),  _(M,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1778 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Khmer  (1780..17FF) */
+  /* Khmer */
 
   /* 1780 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1788 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -392,31 +346,29 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 17B0 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x),  _(x,x),  _(M,R),  _(M,T),
   /* 17B8 */  _(M,T),  _(M,T),  _(M,T),  _(M,B),  _(M,B),  _(M,B), _(M,TL),_(M,TLR),
   /* 17C0 */ _(M,LR),  _(M,L),  _(M,L),  _(M,L), _(M,LR), _(M,LR), _(Bi,x), _(Vs,x),
-  /* 17C8 */  _(M,R), _(RS,x), _(RS,x),  _(x,x), _(CR,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 17D0 */  _(x,x),  _(V,T),  _(V,I),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 17C8 */  _(M,R), _(RS,T), _(RS,T), _(RS,T),_(CSR,T),  _(M,T),  _(M,T),  _(M,T),
+  /* 17D0 */  _(M,T), _(PK,T), _(IS,x),  _(M,T),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 17D8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(A,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 17E0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 17E8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 17F0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 17F8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 17E0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 17E8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-#define indic_offset_0x1900 2208
+#define indic_offset_0x1900u 1704
 
 
-  /* Limbu  (1900..194F) */
+  /* Limbu */
 
   /* 1900 */ _(CP,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1908 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1910 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 1918 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1918 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),
   /* 1920 */  _(M,T),  _(M,T),  _(M,B),  _(M,R),  _(M,R), _(M,TR), _(M,TR),  _(M,T),
   /* 1928 */  _(M,T), _(CS,x), _(CS,x), _(CS,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1930 */ _(CF,x), _(CF,x), _(Bi,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x),
   /* 1938 */ _(CF,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1940 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1948 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1940 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 1948 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
 
-  /* Tai Le  (1950..197F) */
+  /* Tai Le */
 
   /* 1950 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1958 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -425,7 +377,7 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 1970 */ _(TL,x), _(TL,x), _(TL,x), _(TL,x), _(TL,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1978 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* New Tai Lue  (1980..19DF) */
+  /* New Tai Lue */
 
   /* 1980 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1988 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -437,24 +389,21 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 19B8 */  _(M,R),  _(M,R),  _(M,L),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(M,R),
   /* 19C0 */  _(M,R), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x),
   /* 19C8 */ _(TM,x), _(TM,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 19D0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 19D8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* FILLER  (19E0..19FF) */
-
+  /* 19D0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 19D8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 19E0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 19E8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 19F0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 19F8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Buginese  (1A00..1A1F) */
+  /* Buginese */
 
   /* 1A00 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1A08 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1A10 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(M,T),
-  /* 1A18 */  _(M,B),  _(M,L),  _(M,R),  _(M,L),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1A18 */  _(M,B),  _(M,L),  _(M,R),  _(M,T),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Tai Tham  (1A20..1AAF) */
+  /* Tai Tham */
 
   /* 1A20 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1A28 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -462,25 +411,23 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 1A38 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1A40 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1A48 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(VI,x), _(VI,x), _(VI,x),
-  /* 1A50 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x), _(CM,x), _(CM,x), _(CF,x),
+  /* 1A50 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x), _(CM,L), _(CM,x), _(CF,x),
   /* 1A58 */ _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x),  _(x,x),
-  /* 1A60 */  _(V,I),  _(M,R),  _(M,T),  _(M,R),  _(M,R),  _(M,T),  _(M,T),  _(M,T),
+  /* 1A60 */ _(IS,x),  _(M,R),  _(M,T),  _(M,R),  _(M,R),  _(M,T),  _(M,T),  _(M,T),
   /* 1A68 */  _(M,T),  _(M,B),  _(M,B),  _(M,T),  _(M,B),  _(M,R),  _(M,L),  _(M,L),
   /* 1A70 */  _(M,L),  _(M,L),  _(M,L),  _(M,T),  _(M,T), _(TM,x), _(TM,x), _(TM,x),
   /* 1A78 */ _(TM,x), _(TM,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1A80 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1A88 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1A90 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1A98 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1AA0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1AA8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1A80 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1A88 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1A90 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1A98 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-#define indic_offset_0x1b00 2640
+#define indic_offset_0x1b00u 2120
 
 
-  /* Balinese  (1B00..1B7F) */
+  /* Balinese */
 
-  /* 1B00 */ _(Bi,x), _(Bi,x), _(Bi,x), _(CR,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 1B00 */ _(Bi,x), _(Bi,x), _(Bi,x),_(CSR,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x),
   /* 1B08 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 1B10 */ _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1B18 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -490,36 +437,36 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 1B38 */  _(M,B),  _(M,B),  _(M,B), _(M,BR), _(M,TB),_(M,TBR),  _(M,L),  _(M,L),
   /* 1B40 */ _(M,LR), _(M,LR),  _(M,T), _(M,TR),  _(V,R),  _(C,x),  _(C,x),  _(C,x),
   /* 1B48 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1B50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1B58 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1B50 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1B58 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1B60 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1B68 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1B70 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1B78 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Sundanese  (1B80..1BBF) */
+  /* Sundanese */
 
-  /* 1B80 */ _(Bi,x), _(CR,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 1B80 */ _(Bi,x),_(CSR,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 1B88 */ _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1B90 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1B98 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1BA0 */  _(C,x), _(CS,x), _(CS,x), _(CS,x),  _(M,T),  _(M,B),  _(M,L),  _(M,R),
-  /* 1BA8 */  _(M,T),  _(M,T),  _(V,R),  _(V,x), _(CS,x), _(CS,x),  _(C,x),  _(C,x),
-  /* 1BB0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1BB8 */  _(x,x),  _(x,x),  _(A,x),  _(C,x),  _(C,x),  _(C,x), _(CF,x), _(CF,x),
+  /* 1BA8 */  _(M,T),  _(M,T), _(PK,R), _(IS,x), _(CS,x), _(CS,x),  _(C,x),  _(C,x),
+  /* 1BB0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1BB8 */ _(Nd,x), _(Nd,x),  _(A,x),  _(C,x),  _(C,x),  _(C,x), _(CF,x), _(CF,x),
 
-  /* Batak  (1BC0..1BFF) */
+  /* Batak */
 
   /* 1BC0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1BC8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1BD0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1BD8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
-  /* 1BE0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(VI,x), _(VI,x),  _(N,x),  _(M,x),
-  /* 1BE8 */  _(M,x),  _(M,x),  _(M,x),  _(M,x),  _(M,x),  _(M,x),  _(M,x),  _(M,x),
-  /* 1BF0 */ _(CF,x), _(CF,x),  _(V,R),  _(V,R),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1BE0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(VI,x), _(VI,x),  _(N,x),  _(M,R),
+  /* 1BE8 */  _(M,T),  _(M,T),  _(M,R),  _(M,R),  _(M,R),  _(M,T),  _(M,R),  _(M,T),
+  /* 1BF0 */ _(CF,x), _(CF,x), _(PK,R), _(PK,R),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1BF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Lepcha  (1C00..1C4F) */
+  /* Lepcha */
 
   /* 1C00 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1C08 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -527,41 +474,45 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 1C18 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 1C20 */  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(CS,x), _(CS,x),  _(M,R),  _(M,L),
   /* 1C28 */  _(M,L), _(M,TL),  _(M,R),  _(M,R),  _(M,B), _(CF,x), _(CF,x), _(CF,x),
-  /* 1C30 */ _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(Bi,x), _(Bi,x),  _(x,x),  _(N,x),
+  /* 1C30 */ _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(Bi,L), _(Bi,L),  _(x,x),  _(N,x),
   /* 1C38 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1C40 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1C48 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 1C40 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 1C48 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),
 
-#define indic_offset_0x1cd0 2976
+#define indic_offset_0x1cd0u 2456
 
 
-  /* Vedic Extensions  (1CD0..1CFF) */
+  /* Vedic Extensions */
 
-  /* 1CD0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1CD8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1CE0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1CD0 */ _(TM,x), _(TM,x), _(TM,x),  _(x,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x),
+  /* 1CD8 */ _(TM,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x), _(TM,x),
+  /* 1CE0 */ _(TM,x), _(TM,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 1CE8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1CF0 */  _(x,x),  _(x,x), _(Vs,x), _(Vs,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 1CF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 1CF0 */  _(x,x),  _(x,x), _(Vs,x), _(Vs,x), _(TM,x),  _(x,x),  _(x,x),  _(x,x),
 
-#define indic_offset_0xa800 3024
+#define indic_offset_0x2008u 2496
 
 
-  /* Syloti Nagri  (A800..A82F) */
+  /* General Punctuation */
 
-  /* A800 */ _(VI,x), _(VI,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),  _(V,T),  _(C,x),
+  /* 2008 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),_(ZWNJ,x),_(ZWJ,x),  _(x,x),  _(x,x),
+  /* 2010 */  _(x,x),  _(x,x), _(CP,x), _(CP,x), _(CP,x),  _(x,x),  _(x,x),  _(x,x),
+
+#define indic_offset_0xa800u 2512
+
+
+  /* Syloti Nagri */
+
+  /* A800 */ _(VI,x), _(VI,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x), _(PK,T),  _(C,x),
   /* A808 */  _(C,x),  _(C,x),  _(C,x), _(Bi,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A810 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A818 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A820 */  _(C,x),  _(C,x),  _(C,x),  _(M,R),  _(M,R),  _(M,B),  _(M,T),  _(M,R),
   /* A828 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* FILLER  (A830..A83F) */
-
   /* A830 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A838 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Phags-pa  (A840..A87F) */
+  /* Phags-pa */
 
   /* A840 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A848 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -572,7 +523,7 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* A870 */  _(C,x), _(CS,x),  _(C,x), _(Bi,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A878 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Saurashtra  (A880..A8DF) */
+  /* Saurashtra */
 
   /* A880 */ _(Bi,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* A888 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
@@ -584,44 +535,41 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* A8B8 */  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(M,R),
   /* A8C0 */  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(V,B),  _(x,x),  _(x,x),  _(x,x),
   /* A8C8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A8D0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A8D8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* A8D0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* A8D8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* FILLER  (A8E0..A8FF) */
+  /* Devanagari Extended */
 
-  /* A8E0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A8E8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A8F0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* A8E0 */ _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x),
+  /* A8E8 */ _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x),
+  /* A8F0 */ _(Ca,x), _(Ca,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A8F8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Kayah Li  (A900..A92F) */
+  /* Kayah Li */
 
-  /* A900 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A908 */  _(x,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* A900 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* A908 */ _(Nd,x), _(Nd,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A910 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A918 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A920 */  _(C,x),  _(C,x), _(Vo,x), _(Vo,x), _(Vo,x), _(Vo,x), _(Vo,x), _(Vo,x),
   /* A928 */ _(Vo,x), _(Vo,x), _(Vo,x), _(TM,x), _(TM,x), _(TM,x),  _(x,x),  _(x,x),
 
-  /* Rejang  (A930..A95F) */
+  /* Rejang */
 
   /* A930 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A938 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A940 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(M,B),
   /* A948 */  _(M,B),  _(M,B),  _(M,T),  _(M,B),  _(M,B),  _(M,B),  _(M,B), _(CF,x),
-  /* A950 */ _(CF,x), _(CF,x), _(CF,x),  _(V,R),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* A950 */ _(CF,x), _(CF,x), _(CF,x), _(PK,R),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A958 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-  /* FILLER  (A960..A97F) */
-
   /* A960 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A968 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A970 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A978 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Javanese  (A980..A9DF) */
+  /* Javanese */
 
-  /* A980 */ _(Bi,x), _(Bi,x), _(CR,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* A980 */ _(Bi,x), _(Bi,x),_(CSR,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* A988 */ _(VI,x),  _(C,x),  _(C,x),  _(C,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),
   /* A990 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* A998 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -631,17 +579,17 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* A9B8 */  _(M,B),  _(M,B),  _(M,L),  _(M,L),  _(M,T), _(CS,x), _(CM,x), _(CM,x),
   /* A9C0 */ _(V,BR),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* A9C8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A9D0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A9D8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* A9D0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* A9D8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* FILLER  (A9E0..A9FF) */
+  /* Myanmar Extended-B */
 
-  /* A9E0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A9E8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A9F0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* A9F8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* A9E0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(C,x),
+  /* A9E8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* A9F0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* A9F8 */ _(Nd,x), _(Nd,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),
 
-  /* Cham  (AA00..AA5F) */
+  /* Cham */
 
   /* AA00 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),
   /* AA08 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -649,21 +597,21 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* AA18 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* AA20 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* AA28 */  _(C,x),  _(M,T),  _(M,T),  _(M,T),  _(M,T),  _(M,B),  _(M,T),  _(M,L),
-  /* AA30 */  _(M,L),  _(M,T),  _(M,B), _(CM,x), _(CM,x), _(CM,x), _(CM,x),  _(x,x),
+  /* AA30 */  _(M,L),  _(M,T),  _(M,B), _(CM,x), _(CM,L), _(CM,x), _(CM,x),  _(x,x),
   /* AA38 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* AA40 */ _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x),
   /* AA48 */ _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x),  _(x,x),  _(x,x),
-  /* AA50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* AA58 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* AA50 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* AA58 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Myanmar Extended-A  (AA60..AA7F) */
+  /* Myanmar Extended-A */
 
   /* AA60 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* AA68 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* AA70 */  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* AA78 */  _(x,x),  _(x,x),  _(C,x), _(TM,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* AA78 */  _(x,x),  _(x,x),  _(C,x), _(TM,x), _(TM,x), _(TM,x),  _(C,x),  _(C,x),
 
-  /* Tai Viet  (AA80..AADF) */
+  /* Tai Viet */
 
   /* AA80 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* AA88 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -678,31 +626,30 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* AAD0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* AAD8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Meetei Mayek Extensions  (AAE0..AAFF) */
+  /* Meetei Mayek Extensions */
 
   /* AAE0 */ _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* AAE8 */  _(C,x),  _(C,x),  _(C,x),  _(M,L),  _(M,B),  _(M,T),  _(M,L),  _(M,R),
-  /* AAF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(Vs,x),  _(V,I),  _(x,x),
-  /* AAF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* AAF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(Vs,x), _(IS,x),  _(x,x),
 
-#define indic_offset_0xabc0 3792
+#define indic_offset_0xabc0u 3272
 
 
-  /* Meetei Mayek  (ABC0..ABFF) */
+  /* Meetei Mayek */
 
   /* ABC0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* ABC8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(VI,x), _(VI,x),
   /* ABD0 */  _(C,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* ABD8 */  _(C,x),  _(C,x),  _(C,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x), _(CF,x),
   /* ABE0 */ _(CF,x), _(CF,x), _(CF,x),  _(M,R),  _(M,R),  _(M,T),  _(M,R),  _(M,R),
-  /* ABE8 */  _(M,B),  _(M,R),  _(M,R),  _(x,x), _(TM,x),  _(V,B),  _(x,x),  _(x,x),
-  /* ABF0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* ABF8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* ABE8 */  _(M,B),  _(M,R),  _(M,R),  _(x,x), _(TM,x), _(PK,B),  _(x,x),  _(x,x),
+  /* ABF0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* ABF8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-#define indic_offset_0x10a00 3856
+#define indic_offset_0x10a00u 3336
 
 
-  /* Kharoshthi  (10A00..10A5F) */
+  /* Kharoshthi */
 
   /* 10A00 */  _(C,x),  _(M,O),  _(M,B),  _(M,B),  _(x,x),  _(M,T),  _(M,O),  _(x,x),
   /* 10A08 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,B),  _(x,x), _(Bi,x), _(Vs,x),
@@ -711,16 +658,13 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 10A20 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 10A28 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 10A30 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 10A38 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(V,I),
-  /* 10A40 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 10A48 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 10A50 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 10A58 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 10A38 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(IS,x),
+  /* 10A40 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
 
-#define indic_offset_0x11000 3952
+#define indic_offset_0x11000u 3408
 
 
-  /* Brahmi  (11000..1107F) */
+  /* Brahmi */
 
   /* 11000 */ _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
   /* 11008 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
@@ -732,14 +676,14 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 11038 */  _(M,T),  _(M,T),  _(M,T),  _(M,T),  _(M,B),  _(M,B),  _(M,B),  _(M,B),
   /* 11040 */  _(M,B),  _(M,B),  _(M,T),  _(M,T),  _(M,T),  _(M,T),  _(V,T),  _(x,x),
   /* 11048 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 11050 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 11058 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 11060 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 11068 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11050 */  _(x,x),  _(x,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),
+  /* 11058 */_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),
+  /* 11060 */_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x),_(BJN,x), _(Nd,x), _(Nd,x),
+  /* 11068 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 11070 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 11078 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11078 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x), _(NJ,x),
 
-  /* Kaithi  (11080..110CF) */
+  /* Kaithi */
 
   /* 11080 */ _(Bi,x), _(Bi,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 11088 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),
@@ -749,13 +693,11 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 110A8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 110B0 */  _(M,R),  _(M,L),  _(M,R),  _(M,B),  _(M,B),  _(M,T),  _(M,T),  _(M,R),
   /* 110B8 */  _(M,R),  _(V,B),  _(N,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 110C0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 110C8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-#define indic_offset_0x11100 4160
+#define indic_offset_0x11100u 3600
 
 
-  /* Chakma  (11100..1114F) */
+  /* Chakma */
 
   /* 11100 */ _(Bi,x), _(Bi,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),
   /* 11108 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -763,15 +705,21 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 11118 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
   /* 11120 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(M,T),
   /* 11128 */  _(M,T),  _(M,T),  _(M,B),  _(M,B),  _(M,L),  _(M,T), _(M,TB), _(M,TB),
-  /* 11130 */  _(M,T),  _(M,B),  _(M,B),  _(V,I),  _(V,T),  _(x,x),  _(x,x),  _(x,x),
-  /* 11138 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11130 */  _(M,T),  _(M,B),  _(M,B), _(IS,x), _(PK,T),  _(x,x), _(Nd,x), _(Nd,x),
+  /* 11138 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
   /* 11140 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 11148 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-#define indic_offset_0x11180 4240
+  /* Mahajani */
 
+  /* 11150 */ _(Vo,x), _(Vo,x), _(Vo,x), _(Vo,x), _(Vo,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11158 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11160 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11168 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11170 */  _(C,x),  _(C,x),  _(C,x),  _(N,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11178 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-  /* Sharada  (11180..111DF) */
+  /* Sharada */
 
   /* 11180 */ _(Bi,x), _(Bi,x), _(Vs,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 11188 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
@@ -783,13 +731,116 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 111B8 */  _(M,B),  _(M,B),  _(M,B),  _(M,B),  _(M,T),  _(M,T),  _(M,T), _(M,TR),
   /* 111C0 */  _(V,R),  _(A,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
   /* 111C8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 111D0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 111D8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-#define indic_offset_0x11680 4336
-
-
-  /* Takri  (11680..116CF) */
+  /* 111D0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 111D8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+  /* Sinhala Archaic Numbers */
+
+  /* 111E0 */  _(x,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 111E8 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 111F0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 111F8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+  /* Khojki */
+
+  /* 11200 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 11208 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11210 */  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11218 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11220 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11228 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(M,R),  _(M,R),  _(M,R),  _(M,B),
+  /* 11230 */  _(M,T),  _(M,T), _(M,TR), _(M,TR), _(Bi,x),  _(V,R),  _(N,x), _(GM,T),
+
+#define indic_offset_0x112b0u 3912
+
+
+  /* Khudawadi */
+
+  /* 112B0 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 112B8 */ _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 112C0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 112C8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 112D0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 112D8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x), _(Bi,x),
+  /* 112E0 */  _(M,R),  _(M,L),  _(M,R),  _(M,B),  _(M,B),  _(M,T),  _(M,T),  _(M,T),
+  /* 112E8 */  _(M,T),  _(N,x), _(PK,B),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 112F0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 112F8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+  /* Grantha */
+
+  /* 11300 */  _(x,x), _(Bi,x), _(Bi,x), _(Vs,x),  _(x,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 11308 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(x,x),  _(x,x), _(VI,x),
+  /* 11310 */ _(VI,x),  _(x,x),  _(x,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11318 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11320 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11328 */  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11330 */  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(x,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11338 */  _(C,x),  _(C,x),  _(x,x),  _(x,x),  _(N,x),  _(A,x),  _(M,R),  _(M,R),
+  /* 11340 */  _(M,T),  _(M,R),  _(M,R),  _(M,R),  _(M,R),  _(x,x),  _(x,x),  _(M,L),
+  /* 11348 */  _(M,L),  _(x,x),  _(x,x), _(M,LR), _(M,LR),  _(V,R),  _(x,x),  _(x,x),
+  /* 11350 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(M,R),
+  /* 11358 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11360 */ _(VI,x), _(VI,x),  _(M,R),  _(M,R),  _(x,x),  _(x,x), _(Ca,x), _(Ca,x),
+  /* 11368 */ _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11370 */ _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x), _(Ca,x),  _(x,x),  _(x,x),  _(x,x),
+
+#define indic_offset_0x11480u 4112
+
+
+  /* Tirhuta */
+
+  /* 11480 */  _(x,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 11488 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),
+  /* 11490 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11498 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 114A0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 114A8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 114B0 */  _(M,R),  _(M,L),  _(M,R),  _(M,B),  _(M,B),  _(M,B),  _(M,B),  _(M,B),
+  /* 114B8 */  _(M,B),  _(M,L),  _(M,T), _(M,TL), _(M,LR),  _(M,R), _(M,LR), _(Bi,x),
+  /* 114C0 */ _(Bi,x), _(Vs,x),  _(V,B),  _(N,x),  _(A,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 114C8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 114D0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 114D8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+#define indic_offset_0x11580u 4208
+
+
+  /* Siddham */
+
+  /* 11580 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 11588 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),
+  /* 11590 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11598 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 115A0 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 115A8 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(M,R),
+  /* 115B0 */  _(M,L),  _(M,R),  _(M,B),  _(M,B),  _(M,B),  _(M,B),  _(x,x),  _(x,x),
+  /* 115B8 */  _(M,L), _(M,TL), _(M,LR),_(M,TLR), _(Bi,x), _(Bi,x), _(Vs,x),  _(V,B),
+  /* 115C0 */  _(N,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+#define indic_offset_0x11600u 4280
+
+
+  /* Modi */
+
+  /* 11600 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
+  /* 11608 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),  _(C,x),  _(C,x),
+  /* 11610 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11618 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11620 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11628 */  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
+  /* 11630 */  _(M,R),  _(M,R),  _(M,R),  _(M,B),  _(M,B),  _(M,B),  _(M,B),  _(M,B),
+  /* 11638 */  _(M,B),  _(M,T),  _(M,T),  _(M,R),  _(M,R), _(Bi,x), _(Vs,x),  _(V,B),
+  /* 11640 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11648 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11650 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 11658 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11660 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11668 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11670 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+  /* 11678 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
+
+  /* Takri */
 
   /* 11680 */ _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x), _(VI,x),
   /* 11688 */ _(VI,x), _(VI,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),  _(C,x),
@@ -799,30 +850,57 @@ static const INDIC_TABLE_ELEMENT_TYPE indic_table[] = {
   /* 116A8 */  _(C,x),  _(C,x),  _(C,x), _(Bi,x), _(Vs,x),  _(M,T),  _(M,L),  _(M,R),
   /* 116B0 */  _(M,B),  _(M,B),  _(M,T),  _(M,T),  _(M,T),  _(M,T),  _(V,T),  _(N,x),
   /* 116B8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 116C0 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-  /* 116C8 */  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
-
-#define indic_offset_total 4416
+  /* 116C0 */ _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x), _(Nd,x),
+  /* 116C8 */ _(Nd,x), _(Nd,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),  _(x,x),
 
-}; /* Table occupancy: 60% */
+}; /* Table items: 4488; occupancy: 73% */
 
 INDIC_TABLE_ELEMENT_TYPE
 hb_indic_get_categories (hb_codepoint_t u)
 {
-  if (0x0900 <= u && u <= 0x10A0) return indic_table[u - 0x0900 + indic_offset_0x0900];
-  if (0x1700 <= u && u <= 0x1800) return indic_table[u - 0x1700 + indic_offset_0x1700];
-  if (0x1900 <= u && u <= 0x1AB0) return indic_table[u - 0x1900 + indic_offset_0x1900];
-  if (0x1B00 <= u && u <= 0x1C50) return indic_table[u - 0x1B00 + indic_offset_0x1b00];
-  if (0x1CD0 <= u && u <= 0x1D00) return indic_table[u - 0x1CD0 + indic_offset_0x1cd0];
-  if (0xA800 <= u && u <= 0xAB00) return indic_table[u - 0xA800 + indic_offset_0xa800];
-  if (0xABC0 <= u && u <= 0xAC00) return indic_table[u - 0xABC0 + indic_offset_0xabc0];
-  if (0x10A00 <= u && u <= 0x10A60) return indic_table[u - 0x10A00 + indic_offset_0x10a00];
-  if (0x11000 <= u && u <= 0x110D0) return indic_table[u - 0x11000 + indic_offset_0x11000];
-  if (0x11100 <= u && u <= 0x11150) return indic_table[u - 0x11100 + indic_offset_0x11100];
-  if (0x11180 <= u && u <= 0x111E0) return indic_table[u - 0x11180 + indic_offset_0x11180];
-  if (0x11680 <= u && u <= 0x116D0) return indic_table[u - 0x11680 + indic_offset_0x11680];
-  if (unlikely (u == 0x00A0)) return _(CP,x);
-  if (unlikely (u == 0x25CC)) return _(CP,x);
+  switch (u >> 12)
+  {
+    case 0x0u:
+      if (hb_in_range (u, 0x0028u, 0x0040u)) return indic_table[u - 0x0028u + indic_offset_0x0028u];
+      if (hb_in_range (u, 0x00D0u, 0x00D8u)) return indic_table[u - 0x00D0u + indic_offset_0x00d0u];
+      if (hb_in_range (u, 0x0900u, 0x0DF8u)) return indic_table[u - 0x0900u + indic_offset_0x0900u];
+      if (unlikely (u == 0x00A0u)) return _(CP,x);
+      break;
+
+    case 0x1u:
+      if (hb_in_range (u, 0x1000u, 0x10A0u)) return indic_table[u - 0x1000u + indic_offset_0x1000u];
+      if (hb_in_range (u, 0x1700u, 0x17F0u)) return indic_table[u - 0x1700u + indic_offset_0x1700u];
+      if (hb_in_range (u, 0x1900u, 0x1AA0u)) return indic_table[u - 0x1900u + indic_offset_0x1900u];
+      if (hb_in_range (u, 0x1B00u, 0x1C50u)) return indic_table[u - 0x1B00u + indic_offset_0x1b00u];
+      if (hb_in_range (u, 0x1CD0u, 0x1CF8u)) return indic_table[u - 0x1CD0u + indic_offset_0x1cd0u];
+      break;
+
+    case 0x2u:
+      if (hb_in_range (u, 0x2008u, 0x2018u)) return indic_table[u - 0x2008u + indic_offset_0x2008u];
+      if (unlikely (u == 0x25CCu)) return _(CP,x);
+      break;
+
+    case 0xAu:
+      if (hb_in_range (u, 0xA800u, 0xAAF8u)) return indic_table[u - 0xA800u + indic_offset_0xa800u];
+      if (hb_in_range (u, 0xABC0u, 0xAC00u)) return indic_table[u - 0xABC0u + indic_offset_0xabc0u];
+      break;
+
+    case 0x10u:
+      if (hb_in_range (u, 0x10A00u, 0x10A48u)) return indic_table[u - 0x10A00u + indic_offset_0x10a00u];
+      break;
+
+    case 0x11u:
+      if (hb_in_range (u, 0x11000u, 0x110C0u)) return indic_table[u - 0x11000u + indic_offset_0x11000u];
+      if (hb_in_range (u, 0x11100u, 0x11238u)) return indic_table[u - 0x11100u + indic_offset_0x11100u];
+      if (hb_in_range (u, 0x112B0u, 0x11378u)) return indic_table[u - 0x112B0u + indic_offset_0x112b0u];
+      if (hb_in_range (u, 0x11480u, 0x114E0u)) return indic_table[u - 0x11480u + indic_offset_0x11480u];
+      if (hb_in_range (u, 0x11580u, 0x115C8u)) return indic_table[u - 0x11580u + indic_offset_0x11580u];
+      if (hb_in_range (u, 0x11600u, 0x116D0u)) return indic_table[u - 0x11600u + indic_offset_0x11600u];
+      break;
+
+    default:
+      break;
+  }
   return _(x,x);
 }
 
@@ -830,17 +908,27 @@ hb_indic_get_categories (hb_codepoint_t u)
 
 #undef ISC_A
 #undef ISC_Bi
+#undef ISC_BJN
+#undef ISC_Ca
 #undef ISC_C
 #undef ISC_CD
 #undef ISC_CF
 #undef ISC_CHL
 #undef ISC_CM
 #undef ISC_CP
-#undef ISC_CR
+#undef ISC_CPR
 #undef ISC_CS
+#undef ISC_CSR
+#undef ISC_GM
+#undef ISC_IS
+#undef ISC_ZWJ
 #undef ISC_ML
+#undef ISC_ZWNJ
 #undef ISC_N
+#undef ISC_Nd
+#undef ISC_NJ
 #undef ISC_x
+#undef ISC_PK
 #undef ISC_RS
 #undef ISC_TL
 #undef ISC_TM
@@ -852,7 +940,6 @@ hb_indic_get_categories (hb_codepoint_t u)
 
 #undef IMC_B
 #undef IMC_BR
-#undef IMC_I
 #undef IMC_L
 #undef IMC_LR
 #undef IMC_x
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic.cc
index 1e07d33177..33215a304f 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-indic.cc
@@ -37,19 +37,19 @@
  */
 
 
-#define IN_HALF_BLOCK(u, Base) (((u) & ~0x7F) == (Base))
+#define IN_HALF_BLOCK(u, Base) (((u) & ~0x7Fu) == (Base))
 
-#define IS_DEVA(u) (IN_HALF_BLOCK (u, 0x0900))
-#define IS_BENG(u) (IN_HALF_BLOCK (u, 0x0980))
-#define IS_GURU(u) (IN_HALF_BLOCK (u, 0x0A00))
-#define IS_GUJR(u) (IN_HALF_BLOCK (u, 0x0A80))
-#define IS_ORYA(u) (IN_HALF_BLOCK (u, 0x0B00))
-#define IS_TAML(u) (IN_HALF_BLOCK (u, 0x0B80))
-#define IS_TELU(u) (IN_HALF_BLOCK (u, 0x0C00))
-#define IS_KNDA(u) (IN_HALF_BLOCK (u, 0x0C80))
-#define IS_MLYM(u) (IN_HALF_BLOCK (u, 0x0D00))
-#define IS_SINH(u) (IN_HALF_BLOCK (u, 0x0D80))
-#define IS_KHMR(u) (IN_HALF_BLOCK (u, 0x1780))
+#define IS_DEVA(u) (IN_HALF_BLOCK (u, 0x0900u))
+#define IS_BENG(u) (IN_HALF_BLOCK (u, 0x0980u))
+#define IS_GURU(u) (IN_HALF_BLOCK (u, 0x0A00u))
+#define IS_GUJR(u) (IN_HALF_BLOCK (u, 0x0A80u))
+#define IS_ORYA(u) (IN_HALF_BLOCK (u, 0x0B00u))
+#define IS_TAML(u) (IN_HALF_BLOCK (u, 0x0B80u))
+#define IS_TELU(u) (IN_HALF_BLOCK (u, 0x0C00u))
+#define IS_KNDA(u) (IN_HALF_BLOCK (u, 0x0C80u))
+#define IS_MLYM(u) (IN_HALF_BLOCK (u, 0x0D00u))
+#define IS_SINH(u) (IN_HALF_BLOCK (u, 0x0D80u))
+#define IS_KHMR(u) (IN_HALF_BLOCK (u, 0x1780u))
 
 
 #define MATRA_POS_LEFT(u)	POS_PRE_M
@@ -60,8 +60,8 @@
 				  IS_GUJR(u) ? POS_AFTER_POST : \
 				  IS_ORYA(u) ? POS_AFTER_POST : \
 				  IS_TAML(u) ? POS_AFTER_POST : \
-				  IS_TELU(u) ? (u <= 0x0C42 ? POS_BEFORE_SUB : POS_AFTER_SUB) : \
-				  IS_KNDA(u) ? (u < 0x0CC3 || u > 0xCD6 ? POS_BEFORE_SUB : POS_AFTER_SUB) : \
+				  IS_TELU(u) ? (u <= 0x0C42u ? POS_BEFORE_SUB : POS_AFTER_SUB) : \
+				  IS_KNDA(u) ? (u < 0x0CC3u || u > 0xCD6u ? POS_BEFORE_SUB : POS_AFTER_SUB) : \
 				  IS_MLYM(u) ? POS_AFTER_POST : \
 				  IS_SINH(u) ? POS_AFTER_SUB  : \
 				  IS_KHMR(u) ? POS_AFTER_POST : \
@@ -112,20 +112,20 @@ matra_position (hb_codepoint_t u, indic_position_t side)
  * Or completely remove it and just check in the tables.
  */
 static const hb_codepoint_t ra_chars[] = {
-  0x0930, /* Devanagari */
-  0x09B0, /* Bengali */
-  0x09F0, /* Bengali */
-  0x0A30, /* Gurmukhi */	/* No Reph */
-  0x0AB0, /* Gujarati */
-  0x0B30, /* Oriya */
-  0x0BB0, /* Tamil */		/* No Reph */
-  0x0C30, /* Telugu */		/* Reph formed only with ZWJ */
-  0x0CB0, /* Kannada */
-  0x0D30, /* Malayalam */	/* No Reph, Logical Repha */
-
-  0x0DBB, /* Sinhala */		/* Reph formed only with ZWJ */
-
-  0x179A, /* Khmer */		/* No Reph, Visual Repha */
+  0x0930u, /* Devanagari */
+  0x09B0u, /* Bengali */
+  0x09F0u, /* Bengali */
+  0x0A30u, /* Gurmukhi */	/* No Reph */
+  0x0AB0u, /* Gujarati */
+  0x0B30u, /* Oriya */
+  0x0BB0u, /* Tamil */		/* No Reph */
+  0x0C30u, /* Telugu */		/* Reph formed only with ZWJ */
+  0x0CB0u, /* Kannada */
+  0x0D30u, /* Malayalam */	/* No Reph, Logical Repha */
+
+  0x0DBBu, /* Sinhala */		/* Reph formed only with ZWJ */
+
+  0x179Au, /* Khmer */		/* No Reph, Visual Repha */
 };
 
 static inline bool
@@ -145,28 +145,18 @@ is_one_of (const hb_glyph_info_t &info, unsigned int flags)
   return !!(FLAG (info.indic_category()) & flags);
 }
 
-#define JOINER_FLAGS (FLAG (OT_ZWJ) | FLAG (OT_ZWNJ))
 static inline bool
 is_joiner (const hb_glyph_info_t &info)
 {
   return is_one_of (info, JOINER_FLAGS);
 }
 
-#define MEDIAL_FLAGS (FLAG (OT_CM) | FLAG (OT_CM2))
-
-/* Note:
- *
- * We treat Vowels and placeholders as if they were consonants.  This is safe because Vowels
- * cannot happen in a consonant syllable.  The plus side however is, we can call the
- * consonant syllable logic from the vowel syllable function and get it all right! */
-#define CONSONANT_FLAGS (FLAG (OT_C) | FLAG (OT_Ra) | MEDIAL_FLAGS | FLAG (OT_V) | FLAG (OT_NBSP) | FLAG (OT_DOTTEDCIRCLE))
 static inline bool
 is_consonant (const hb_glyph_info_t &info)
 {
   return is_one_of (info, CONSONANT_FLAGS);
 }
 
-#define HALANT_OR_COENG_FLAGS (FLAG (OT_H) | FLAG (OT_Coeng))
 static inline bool
 is_halant_or_coeng (const hb_glyph_info_t &info)
 {
@@ -178,7 +168,7 @@ set_indic_properties (hb_glyph_info_t &info)
 {
   hb_codepoint_t u = info.codepoint;
   unsigned int type = hb_indic_get_categories (u);
-  indic_category_t cat = (indic_category_t) (type & 0x7F);
+  indic_category_t cat = (indic_category_t) (type & 0x7Fu);
   indic_position_t pos = (indic_position_t) (type >> 8);
 
 
@@ -188,48 +178,59 @@ set_indic_properties (hb_glyph_info_t &info)
 
 
   /* The spec says U+0952 is OT_A.  However, testing shows that Uniscribe
-   * treats U+0951..U+0954 all behave similarly.
-   * TESTS:
+   * treats a whole bunch of characters similarly.
+   * TESTS: For example, for U+0951:
    * U+092E,U+0947,U+0952
    * U+092E,U+0952,U+0947
    * U+092E,U+0947,U+0951
    * U+092E,U+0951,U+0947
+   * U+092E,U+0951,U+0952
+   * U+092E,U+0952,U+0951
    */
-  if (unlikely (hb_in_range<hb_codepoint_t> (u, 0x0951, 0x0954)))
+  if (unlikely (hb_in_ranges (u, 0x0951u, 0x0952u,
+				 0x1CD0u, 0x1CD2u,
+				 0x1CD4u, 0x1CE1u) ||
+			    u == 0x1CF4u))
     cat = OT_A;
-
-  if (unlikely (u == 0x17D1))
-    cat = OT_X;
-  if (cat == OT_X &&
-      unlikely (hb_in_range<hb_codepoint_t> (u, 0x17CB, 0x17D3))) /* Khmer Various signs */
+  /* The following act more like the Bindus. */
+  else if (unlikely (hb_in_range (u, 0x0953u, 0x0954u)))
+    cat = OT_SM;
+  /* The following act like consonants. */
+  else if (unlikely (hb_in_ranges (u, 0x0A72u, 0x0A73u,
+				      0x1CF5u, 0x1CF6u)))
+    cat = OT_C;
+  /* TODO: The following should only be allowed after a Visarga.
+   * For now, just treat them like regular tone marks. */
+  else if (unlikely (hb_in_range (u, 0x1CE2u, 0x1CE8u)))
+    cat = OT_A;
+  /* TODO: The following should only be allowed after some of
+   * the nasalization marks, maybe only for U+1CE9..U+1CF1.
+   * For now, just treat them like tone marks. */
+  else if (unlikely (u == 0x1CEDu))
+    cat = OT_A;
+  /* The following take marks in standalone clusters, similar to Avagraha. */
+  else if (unlikely (hb_in_ranges (u, 0xA8F2u, 0xA8F7u,
+				      0x1CE9u, 0x1CECu,
+				      0x1CEEu, 0x1CF1u)))
+  {
+    cat = OT_Symbol;
+    ASSERT_STATIC ((int) INDIC_SYLLABIC_CATEGORY_AVAGRAHA == OT_Symbol);
+  }
+  else if (unlikely (hb_in_range (u, 0x17CDu, 0x17D1u) ||
+		     u == 0x17CBu || u == 0x17D3u || u == 0x17DDu)) /* Khmer Various signs */
   {
     /* These are like Top Matras. */
     cat = OT_M;
     pos = POS_ABOVE_C;
   }
-  if (u == 0x17C6) /* Khmer Bindu doesn't like to be repositioned. */
-    cat = OT_N;
-
-  if (unlikely (u == 0x17D2)) cat = OT_Coeng; /* Khmer coeng */
-  else if (unlikely (u == 0x200C)) cat = OT_ZWNJ;
-  else if (unlikely (u == 0x200D)) cat = OT_ZWJ;
-  else if (unlikely (u == 0x25CC)) cat = OT_DOTTEDCIRCLE;
-  else if (unlikely (u == 0x0A71)) cat = OT_SM; /* GURMUKHI ADDAK.  Move it to the end. */
-  else if (unlikely (u == 0xA982)) cat = OT_SM; /* Javanese repha. */
-  else if (unlikely (u == 0xA9BE)) cat = OT_CM2; /* Javanese medial ya. */
-  else if (unlikely (u == 0xA9BD)) { cat = OT_M; pos = POS_POST_C; } /* Javanese vocalic r. */
-
-  if (cat == OT_Repha) {
-    /* There are two kinds of characters marked as Repha:
-     * - The ones that are GenCat=Mn are already positioned visually, ie. after base. (eg. Khmer)
-     * - The ones that are GenCat=Lo is encoded logically, ie. beginning of syllable. (eg. Malayalam)
-     *
-     * We recategorize the first kind to look like a Nukta and attached to the base directly.
-     */
-    if (_hb_glyph_info_get_general_category (&info) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)
-      cat = OT_N;
-  }
-
+  else if (unlikely (u == 0x17C6u)) cat = OT_N; /* Khmer Bindu doesn't like to be repositioned. */
+  else if (unlikely (u == 0x17D2u)) cat = OT_Coeng; /* Khmer coeng */
+  else if (unlikely (hb_in_range (u, 0x2010u, 0x2011u)))
+				    cat = OT_PLACEHOLDER;
+  else if (unlikely (u == 0x25CCu)) cat = OT_DOTTEDCIRCLE;
+  else if (unlikely (u == 0xA982u)) cat = OT_SM; /* Javanese repha. */
+  else if (unlikely (u == 0xA9BEu)) cat = OT_CM2; /* Javanese medial ya. */
+  else if (unlikely (u == 0xA9BDu)) { cat = OT_M; pos = POS_POST_C; } /* Javanese vocalic r. */
 
 
   /*
@@ -246,12 +247,12 @@ set_indic_properties (hb_glyph_info_t &info)
   {
     pos = matra_position (u, pos);
   }
-  else if ((FLAG (cat) & (FLAG (OT_SM) | FLAG (OT_VD) | FLAG (OT_A) | FLAG (OT_Avag))))
+  else if ((FLAG (cat) & (FLAG (OT_SM) | FLAG (OT_VD) | FLAG (OT_A) | FLAG (OT_Symbol))))
   {
     pos = POS_SMVD;
   }
 
-  if (unlikely (u == 0x0B01)) pos = POS_BEFORE_SUB; /* Oriya Bindu is BeforeSub in the spec. */
+  if (unlikely (u == 0x0B01u)) pos = POS_BEFORE_SUB; /* Oriya Bindu is BeforeSub in the spec. */
 
 
 
@@ -315,20 +316,20 @@ struct indic_config_t
 static const indic_config_t indic_configs[] =
 {
   /* Default.  Should be first. */
-  {HB_SCRIPT_INVALID,	false,     0,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_1},
-  {HB_SCRIPT_DEVANAGARI,true, 0x094D,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
-  {HB_SCRIPT_BENGALI,	true, 0x09CD,BASE_POS_LAST, REPH_POS_AFTER_SUB,  REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
-  {HB_SCRIPT_GURMUKHI,	true, 0x0A4D,BASE_POS_LAST, REPH_POS_BEFORE_SUB, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
-  {HB_SCRIPT_GUJARATI,	true, 0x0ACD,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
-  {HB_SCRIPT_ORIYA,	true, 0x0B4D,BASE_POS_LAST, REPH_POS_AFTER_MAIN, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
-  {HB_SCRIPT_TAMIL,	true, 0x0BCD,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_2},
-  {HB_SCRIPT_TELUGU,	true, 0x0C4D,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_EXPLICIT, BLWF_MODE_POST_ONLY,    PREF_LEN_2},
-  {HB_SCRIPT_KANNADA,	true, 0x0CCD,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT, BLWF_MODE_POST_ONLY,    PREF_LEN_2},
-  {HB_SCRIPT_MALAYALAM,	true, 0x0D4D,BASE_POS_LAST, REPH_POS_AFTER_MAIN, REPH_MODE_LOG_REPHA,BLWF_MODE_PRE_AND_POST, PREF_LEN_2},
-  {HB_SCRIPT_SINHALA,	false,0x0DCA,BASE_POS_LAST_SINHALA,
-						    REPH_POS_AFTER_MAIN, REPH_MODE_EXPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
-  {HB_SCRIPT_KHMER,	false,0x17D2,BASE_POS_FIRST,REPH_POS_DONT_CARE,  REPH_MODE_VIS_REPHA,BLWF_MODE_PRE_AND_POST, PREF_LEN_2},
-  {HB_SCRIPT_JAVANESE,	false,0xA9C0,BASE_POS_FIRST,REPH_POS_DONT_CARE,  REPH_MODE_VIS_REPHA,BLWF_MODE_PRE_AND_POST, PREF_LEN_1},
+  {HB_SCRIPT_INVALID,	false,      0,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_1},
+  {HB_SCRIPT_DEVANAGARI,true, 0x094Du,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
+  {HB_SCRIPT_BENGALI,	true, 0x09CDu,BASE_POS_LAST, REPH_POS_AFTER_SUB,  REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
+  {HB_SCRIPT_GURMUKHI,	true, 0x0A4Du,BASE_POS_LAST, REPH_POS_BEFORE_SUB, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
+  {HB_SCRIPT_GUJARATI,	true, 0x0ACDu,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
+  {HB_SCRIPT_ORIYA,	true, 0x0B4Du,BASE_POS_LAST, REPH_POS_AFTER_MAIN, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
+  {HB_SCRIPT_TAMIL,	true, 0x0BCDu,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_2},
+  {HB_SCRIPT_TELUGU,	true, 0x0C4Du,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_EXPLICIT, BLWF_MODE_POST_ONLY,    PREF_LEN_2},
+  {HB_SCRIPT_KANNADA,	true, 0x0CCDu,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT, BLWF_MODE_POST_ONLY,    PREF_LEN_2},
+  {HB_SCRIPT_MALAYALAM,	true, 0x0D4Du,BASE_POS_LAST, REPH_POS_AFTER_MAIN, REPH_MODE_LOG_REPHA,BLWF_MODE_PRE_AND_POST, PREF_LEN_2},
+  {HB_SCRIPT_SINHALA,	false,0x0DCAu,BASE_POS_LAST_SINHALA,
+						     REPH_POS_AFTER_MAIN, REPH_MODE_EXPLICIT, BLWF_MODE_PRE_AND_POST, PREF_LEN_DONT_CARE},
+  {HB_SCRIPT_KHMER,	false,0x17D2u,BASE_POS_FIRST,REPH_POS_DONT_CARE,  REPH_MODE_VIS_REPHA,BLWF_MODE_PRE_AND_POST, PREF_LEN_2},
+  {HB_SCRIPT_JAVANESE,	false,0xA9C0u,BASE_POS_FIRST,REPH_POS_DONT_CARE,  REPH_MODE_VIS_REPHA,BLWF_MODE_PRE_AND_POST, PREF_LEN_1},
 };
 
 
@@ -552,12 +553,12 @@ data_create_indic (const hb_ot_shape_plan_t *plan)
       break;
     }
 
-  indic_plan->is_old_spec = indic_plan->config->has_old_spec && ((plan->map.chosen_script[0] & 0x000000FF) != '2');
+  indic_plan->is_old_spec = indic_plan->config->has_old_spec && ((plan->map.chosen_script[0] & 0x000000FFu) != '2');
   indic_plan->virama_glyph = (hb_codepoint_t) -1;
 
   /* Use zero-context would_substitute() matching for new-spec of the main
-   * Indic scripts, but not for old-spec or scripts with one spec only. */
-  bool zero_context = indic_plan->config->has_old_spec || !indic_plan->is_old_spec;
+   * Indic scripts, and scripts with one spec only, but not for old-specs. */
+  bool zero_context = !indic_plan->is_old_spec;
   indic_plan->rphf.init (&plan->map, HB_TAG('r','p','h','f'), zero_context);
   indic_plan->pref.init (&plan->map, HB_TAG('p','r','e','f'), zero_context);
   indic_plan->blwf.init (&plan->map, HB_TAG('b','l','w','f'), zero_context);
@@ -614,7 +615,7 @@ enum syllable_type_t {
   consonant_syllable,
   vowel_syllable,
   standalone_cluster,
-  avagraha_cluster,
+  symbol_cluster,
   broken_cluster,
   non_indic_cluster,
 };
@@ -634,8 +635,9 @@ setup_masks_indic (const hb_ot_shape_plan_t *plan HB_UNUSED,
    * and setup masks later on in a pause-callback. */
 
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    set_indic_properties (buffer->info[i]);
+    set_indic_properties (info[i]);
 }
 
 static void
@@ -672,10 +674,12 @@ update_consonant_positions (const hb_ot_shape_plan_t *plan,
   {
     hb_face_t *face = font->face;
     unsigned int count = buffer->len;
+    hb_glyph_info_t *info = buffer->info;
     for (unsigned int i = 0; i < count; i++)
-      if (buffer->info[i].indic_position() == POS_BASE_C) {
-	hb_codepoint_t consonant = buffer->info[i].codepoint;
-	buffer->info[i].indic_position() = consonant_position_from_face (indic_plan, consonant, virama, face);
+      if (info[i].indic_position() == POS_BASE_C)
+      {
+	hb_codepoint_t consonant = info[i].codepoint;
+	info[i].indic_position() = consonant_position_from_face (indic_plan, consonant, virama, face);
       }
   }
 }
@@ -725,8 +729,13 @@ initial_reordering_consonant_syllable (const hb_ot_shape_plan_t *plan,
 	))
     {
       /* See if it matches the 'rphf' feature. */
-      hb_codepoint_t glyphs[2] = {info[start].codepoint, info[start + 1].codepoint};
-      if (indic_plan->rphf.would_substitute (glyphs, ARRAY_LENGTH (glyphs), face))
+      hb_codepoint_t glyphs[3] = {info[start].codepoint,
+				  info[start + 1].codepoint,
+				  indic_plan->config->reph_mode == REPH_MODE_EXPLICIT ?
+				    info[start + 2].codepoint : 0};
+      if (indic_plan->rphf.would_substitute (glyphs, 2, face) ||
+	  (indic_plan->config->reph_mode == REPH_MODE_EXPLICIT &&
+	   indic_plan->rphf.would_substitute (glyphs, 3, face)))
       {
 	limit += 2;
 	while (limit < end && is_joiner (info[limit]))
@@ -801,7 +810,7 @@ initial_reordering_consonant_syllable (const hb_ot_shape_plan_t *plan,
       case BASE_POS_LAST_SINHALA:
       {
         /* Sinhala base positioning is slightly different from main Indic, in that:
-	 * 1. It's ZWJ behavior is different,
+	 * 1. Its ZWJ behavior is different,
 	 * 2. We don't need to look into the font for consonant positions.
 	 */
 
@@ -1151,8 +1160,8 @@ initial_reordering_standalone_cluster (const hb_ot_shape_plan_t *plan,
 				       hb_buffer_t *buffer,
 				       unsigned int start, unsigned int end)
 {
-  /* We treat NBSP/dotted-circle as if they are consonants, so we should just chain.
-   * Only if not in compatibility mode that is... */
+  /* We treat placeholder/dotted-circle as if they are consonants, so we
+   * should just chain.  Only if not in compatibility mode that is... */
 
   if (hb_options ().uniscribe_bug_compatible)
   {
@@ -1177,10 +1186,10 @@ initial_reordering_broken_cluster (const hb_ot_shape_plan_t *plan,
 }
 
 static void
-initial_reordering_avagraha_cluster (const hb_ot_shape_plan_t *plan HB_UNUSED,
-				     hb_face_t *face HB_UNUSED,
-				     hb_buffer_t *buffer HB_UNUSED,
-				     unsigned int start HB_UNUSED, unsigned int end HB_UNUSED)
+initial_reordering_symbol_cluster (const hb_ot_shape_plan_t *plan HB_UNUSED,
+				   hb_face_t *face HB_UNUSED,
+				   hb_buffer_t *buffer HB_UNUSED,
+				   unsigned int start HB_UNUSED, unsigned int end HB_UNUSED)
 {
   /* Nothing to do right now.  If we ever switch to using the output
    * buffer in the reordering process, we'd need to next_glyph() here. */
@@ -1208,7 +1217,7 @@ initial_reordering_syllable (const hb_ot_shape_plan_t *plan,
   case consonant_syllable:	initial_reordering_consonant_syllable (plan, face, buffer, start, end); return;
   case vowel_syllable:		initial_reordering_vowel_syllable     (plan, face, buffer, start, end); return;
   case standalone_cluster:	initial_reordering_standalone_cluster (plan, face, buffer, start, end); return;
-  case avagraha_cluster:	initial_reordering_avagraha_cluster   (plan, face, buffer, start, end); return;
+  case symbol_cluster:		initial_reordering_symbol_cluster     (plan, face, buffer, start, end); return;
   case broken_cluster:		initial_reordering_broken_cluster     (plan, face, buffer, start, end); return;
   case non_indic_cluster:	initial_reordering_non_indic_cluster  (plan, face, buffer, start, end); return;
   }
@@ -1222,8 +1231,10 @@ insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED,
   /* Note: This loop is extra overhead, but should not be measurable. */
   bool has_broken_syllables = false;
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if ((buffer->info[i].syllable() & 0x0F) == broken_cluster) {
+    if ((info[i].syllable() & 0x0F) == broken_cluster)
+    {
       has_broken_syllables = true;
       break;
     }
@@ -1232,11 +1243,11 @@ insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED,
 
 
   hb_codepoint_t dottedcircle_glyph;
-  if (!font->get_glyph (0x25CC, 0, &dottedcircle_glyph))
+  if (!font->get_glyph (0x25CCu, 0, &dottedcircle_glyph))
     return;
 
   hb_glyph_info_t dottedcircle = {0};
-  dottedcircle.codepoint = 0x25CC;
+  dottedcircle.codepoint = 0x25CCu;
   set_indic_properties (dottedcircle);
   dottedcircle.codepoint = dottedcircle_glyph;
 
@@ -1302,6 +1313,27 @@ final_reordering_syllable (const hb_ot_shape_plan_t *plan,
   const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data;
   hb_glyph_info_t *info = buffer->info;
 
+
+  /* This function relies heavily on halant glyphs.  Lots of ligation
+   * and possibly multiplication substitutions happened prior to this
+   * phase, and that might have messed up our properties.  Recover
+   * from a particular case of that where we're fairly sure that a
+   * class of OT_H is desired but has been lost. */
+  if (indic_plan->virama_glyph)
+  {
+    unsigned int virama_glyph = indic_plan->virama_glyph;
+    for (unsigned int i = start; i < end; i++)
+      if (info[i].codepoint == virama_glyph &&
+	  _hb_glyph_info_ligated (&info[i]) &&
+	  _hb_glyph_info_multiplied (&info[i]))
+      {
+        /* This will make sure that this glyph passes is_halant_or_coeng() test. */
+	info[i].indic_category() = OT_H;
+	_hb_glyph_info_clear_ligated_and_multiplied (&info[i]);
+      }
+  }
+
+
   /* 4. Final reordering:
    *
    * After the localized forms and basic shaping forms GSUB features have been
@@ -1310,21 +1342,45 @@ final_reordering_syllable (const hb_ot_shape_plan_t *plan,
    * cluster.
    */
 
+  bool try_pref = !!indic_plan->mask_array[PREF];
+
   /* Find base again */
   unsigned int base;
   for (base = start; base < end; base++)
-    if (info[base].indic_position() >= POS_BASE_C) {
+    if (info[base].indic_position() >= POS_BASE_C)
+    {
+      if (try_pref && base + 1 < end && indic_plan->config->pref_len == 2)
+      {
+	for (unsigned int i = base + 1; i < end; i++)
+	  if ((info[i].mask & indic_plan->mask_array[PREF]) != 0)
+	  {
+	    if (!(_hb_glyph_info_substituted (&info[i]) &&
+		  _hb_glyph_info_ligated_and_didnt_multiply (&info[i])))
+	    {
+	      /* Ok, this was a 'pref' candidate but didn't form any.
+	       * Base is around here... */
+	      base = i;
+	      while (base < end && is_halant_or_coeng (info[base]))
+		base++;
+	      info[base].indic_position() = POS_BASE_C;
+
+	      try_pref = false;
+	    }
+	    break;
+	  }
+      }
+
       if (start < base && info[base].indic_position() > POS_BASE_C)
         base--;
       break;
     }
   if (base == end && start < base &&
-      info[base - 1].indic_category() != OT_ZWJ)
-    base--;
-  while (start < base &&
-	 (info[base].indic_category() == OT_H ||
-	  info[base].indic_category() == OT_N))
+      is_one_of (info[base - 1], FLAG (OT_ZWJ)))
     base--;
+  if (base < end)
+    while (start < base &&
+	   is_one_of (info[base], (FLAG (OT_N) | HALANT_OR_COENG_FLAGS)))
+      base--;
 
 
   /*   o Reorder matras:
@@ -1349,7 +1405,7 @@ final_reordering_syllable (const hb_ot_shape_plan_t *plan,
     if (buffer->props.script != HB_SCRIPT_MALAYALAM && buffer->props.script != HB_SCRIPT_TAMIL)
     {
       while (new_pos > start &&
-	     !(is_one_of (info[new_pos], (FLAG (OT_M) | FLAG (OT_H) | FLAG (OT_Coeng)))))
+	     !(is_one_of (info[new_pos], (FLAG (OT_M) | HALANT_OR_COENG_FLAGS))))
 	new_pos--;
 
       /* If we found no Halant we are done.
@@ -1412,7 +1468,7 @@ final_reordering_syllable (const hb_ot_shape_plan_t *plan,
   if (start + 1 < end &&
       info[start].indic_position() == POS_RA_TO_BECOME_REPH &&
       ((info[start].indic_category() == OT_Repha) ^
-       _hb_glyph_info_ligated (&info[start])))
+       _hb_glyph_info_ligated_and_didnt_multiply (&info[start])))
   {
     unsigned int new_reph_pos;
     reph_position_t reph_pos = indic_plan->config->reph_pos;
@@ -1549,7 +1605,7 @@ final_reordering_syllable (const hb_ot_shape_plan_t *plan,
    *     the following rules:
    */
 
-  if (indic_plan->mask_array[PREF] && base + 1 < end) /* Otherwise there can't be any pre-base reordering Ra. */
+  if (try_pref && base + 1 < end) /* Otherwise there can't be any pre-base reordering Ra. */
   {
     unsigned int pref_len = indic_plan->config->pref_len;
     for (unsigned int i = base + 1; i < end; i++)
@@ -1565,7 +1621,7 @@ final_reordering_syllable (const hb_ot_shape_plan_t *plan,
 	 * If pref len is longer than one, then only reorder if it ligated.  If
 	 * pref len is one, only reorder if it didn't ligate with other things. */
 	if (_hb_glyph_info_substituted (&info[i]) &&
-	    ((pref_len == 1) ^ _hb_glyph_info_ligated (&info[i])))
+	    ((pref_len == 1) ^ _hb_glyph_info_ligated_and_didnt_multiply (&info[i])))
 	{
 	  /*
 	   *       2. Try to find a target position the same way as for pre-base matra.
@@ -1699,37 +1755,37 @@ decompose_indic (const hb_ot_shape_normalize_context_t *c,
   switch (ab)
   {
     /* Don't decompose these. */
-    case 0x0931  : return false;
-    case 0x0B94  : return false;
+    case 0x0931u  : return false;
+    case 0x0B94u  : return false;
 
 
     /*
      * Decompose split matras that don't have Unicode decompositions.
      */
 
-    case 0x0F77  : *a = 0x0FB2; *b= 0x0F81; return true;
-    case 0x0F79  : *a = 0x0FB3; *b= 0x0F81; return true;
-    case 0x17BE  : *a = 0x17C1; *b= 0x17BE; return true;
-    case 0x17BF  : *a = 0x17C1; *b= 0x17BF; return true;
-    case 0x17C0  : *a = 0x17C1; *b= 0x17C0; return true;
-    case 0x17C4  : *a = 0x17C1; *b= 0x17C4; return true;
-    case 0x17C5  : *a = 0x17C1; *b= 0x17C5; return true;
-    case 0x1925  : *a = 0x1920; *b= 0x1923; return true;
-    case 0x1926  : *a = 0x1920; *b= 0x1924; return true;
-    case 0x1B3C  : *a = 0x1B42; *b= 0x1B3C; return true;
-    case 0x1112E  : *a = 0x11127; *b= 0x11131; return true;
-    case 0x1112F  : *a = 0x11127; *b= 0x11132; return true;
+    case 0x0F77u  : *a = 0x0FB2u; *b= 0x0F81u; return true;
+    case 0x0F79u  : *a = 0x0FB3u; *b= 0x0F81u; return true;
+    case 0x17BEu  : *a = 0x17C1u; *b= 0x17BEu; return true;
+    case 0x17BFu  : *a = 0x17C1u; *b= 0x17BFu; return true;
+    case 0x17C0u  : *a = 0x17C1u; *b= 0x17C0u; return true;
+    case 0x17C4u  : *a = 0x17C1u; *b= 0x17C4u; return true;
+    case 0x17C5u  : *a = 0x17C1u; *b= 0x17C5u; return true;
+    case 0x1925u  : *a = 0x1920u; *b= 0x1923u; return true;
+    case 0x1926u  : *a = 0x1920u; *b= 0x1924u; return true;
+    case 0x1B3Cu  : *a = 0x1B42u; *b= 0x1B3Cu; return true;
+    case 0x1112Eu  : *a = 0x11127u; *b= 0x11131u; return true;
+    case 0x1112Fu  : *a = 0x11127u; *b= 0x11132u; return true;
 #if 0
     /* This one has no decomposition in Unicode, but needs no decomposition either. */
-    /* case 0x0AC9  : return false; */
-    case 0x0B57  : *a = no decomp, -> RIGHT; return true;
-    case 0x1C29  : *a = no decomp, -> LEFT; return true;
-    case 0xA9C0  : *a = no decomp, -> RIGHT; return true;
-    case 0x111BF  : *a = no decomp, -> ABOVE; return true;
+    /* case 0x0AC9u  : return false; */
+    case 0x0B57u  : *a = no decomp, -> RIGHT; return true;
+    case 0x1C29u  : *a = no decomp, -> LEFT; return true;
+    case 0xA9C0u  : *a = no decomp, -> RIGHT; return true;
+    case 0x111BuF  : *a = no decomp, -> ABOVE; return true;
 #endif
   }
 
-  if ((ab == 0x0DDA || hb_in_range<hb_codepoint_t> (ab, 0x0DDC, 0x0DDE)))
+  if ((ab == 0x0DDAu || hb_in_range (ab, 0x0DDCu, 0x0DDEu)))
   {
     /*
      * Sinhala split matras...  Let the fun begin.
@@ -1766,7 +1822,7 @@ decompose_indic (const hb_ot_shape_normalize_context_t *c,
 	 indic_plan->pstf.would_substitute (&glyph, 1, c->font->face)))
     {
       /* Ok, safe to use Uniscribe-style decomposition. */
-      *a = 0x0DD9;
+      *a = 0x0DD9u;
       *b = ab;
       return true;
     }
@@ -1786,7 +1842,7 @@ compose_indic (const hb_ot_shape_normalize_context_t *c,
     return false;
 
   /* Composition-exclusion exceptions that we want to recompose. */
-  if (a == 0x09AF && b == 0x09BC) { *ab = 0x09DF; return true; }
+  if (a == 0x09AFu && b == 0x09BCu) { *ab = 0x09DFu; return true; }
 
   return c->unicode->compose (a, b, ab);
 }
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar-machine.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar-machine.hh
index a9c8dbeaac..29fdf9a1ae 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar-machine.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar-machine.hh
@@ -62,7 +62,7 @@ static const short _myanmar_syllable_machine_index_offsets[] = {
 
 static const char _myanmar_syllable_machine_indicies[] = {
 	1, 1, 2, 3, 4, 4, 0, 5, 
-	0, 6, 0, 1, 0, 0, 0, 7, 
+	0, 6, 1, 0, 0, 0, 0, 7, 
 	0, 8, 1, 0, 9, 10, 11, 12, 
 	13, 14, 15, 16, 17, 18, 19, 0, 
 	21, 22, 23, 23, 20, 24, 20, 25, 
@@ -119,14 +119,14 @@ static const char _myanmar_syllable_machine_indicies[] = {
 	20, 20, 20, 20, 20, 20, 20, 20, 
 	20, 31, 20, 33, 20, 35, 20, 21, 
 	20, 23, 23, 20, 24, 20, 25, 20, 
-	20, 20, 20, 20, 20, 20, 20, 20, 
+	20, 20, 20, 20, 20, 20, 34, 20, 
 	20, 27, 20, 29, 20, 31, 32, 33, 
 	34, 35, 20, 21, 20, 23, 23, 20, 
 	24, 20, 25, 20, 20, 20, 20, 20, 
 	20, 20, 34, 20, 20, 27, 20, 20, 
 	20, 31, 32, 33, 34, 35, 20, 21, 
 	20, 23, 23, 20, 24, 20, 25, 20, 
-	20, 20, 20, 20, 20, 20, 20, 20, 
+	20, 20, 20, 20, 20, 20, 34, 20, 
 	20, 27, 28, 29, 20, 31, 32, 33, 
 	34, 35, 20, 21, 22, 23, 23, 20, 
 	24, 20, 25, 20, 20, 20, 20, 20, 
@@ -169,8 +169,8 @@ static const char _myanmar_syllable_machine_indicies[] = {
 	25, 20, 20, 20, 20, 20, 20, 20, 
 	26, 20, 20, 27, 28, 29, 30, 31, 
 	32, 33, 34, 35, 20, 1, 1, 2, 
-	3, 3, 3, 42, 5, 42, 6, 42, 
-	1, 42, 42, 42, 1, 42, 8, 1, 
+	3, 3, 3, 42, 5, 42, 6, 1, 
+	42, 42, 42, 42, 1, 42, 8, 1, 
 	42, 9, 10, 11, 12, 13, 14, 15, 
 	16, 17, 18, 42, 2, 42, 3, 3, 
 	42, 5, 42, 6, 42, 42, 42, 42, 
@@ -191,14 +191,14 @@ static const char _myanmar_syllable_machine_indicies[] = {
 	42, 42, 42, 42, 42, 42, 42, 42, 
 	42, 42, 13, 42, 15, 42, 17, 42, 
 	2, 42, 3, 3, 42, 5, 42, 6, 
-	42, 42, 42, 42, 42, 42, 42, 42, 
+	42, 42, 42, 42, 42, 42, 42, 16, 
 	42, 42, 9, 42, 11, 42, 13, 14, 
 	15, 16, 17, 42, 2, 42, 3, 3, 
 	42, 5, 42, 6, 42, 42, 42, 42, 
 	42, 42, 42, 16, 42, 42, 9, 42, 
 	42, 42, 13, 14, 15, 16, 17, 42, 
 	2, 42, 3, 3, 42, 5, 42, 6, 
-	42, 42, 42, 42, 42, 42, 42, 42, 
+	42, 42, 42, 42, 42, 42, 42, 16, 
 	42, 42, 9, 10, 11, 42, 13, 14, 
 	15, 16, 17, 42, 2, 3, 3, 3, 
 	42, 5, 42, 6, 42, 42, 42, 42, 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar.cc
index 50209ffb0e..258ccc470c 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-myanmar.cc
@@ -134,7 +134,7 @@ enum myanmar_category_t {
   OT_D   = 19, /* Digits except zero */
   OT_D0  = 20, /* Digit zero */
   OT_DB  = OT_N, /* Dot below */
-  OT_GB  = OT_DOTTEDCIRCLE,
+  OT_GB  = OT_PLACEHOLDER,
   OT_MH  = 21, /* Various consonant medial types */
   OT_MR  = 22, /* Various consonant medial types */
   OT_MW  = 23, /* Various consonant medial types */
@@ -157,12 +157,6 @@ is_one_of (const hb_glyph_info_t &info, unsigned int flags)
   return !!(FLAG (info.myanmar_category()) & flags);
 }
 
-/* Note:
- *
- * We treat Vowels and placeholders as if they were consonants.  This is safe because Vowels
- * cannot happen in a consonant syllable.  The plus side however is, we can call the
- * consonant syllable logic from the vowel syllable function and get it all right! */
-#define CONSONANT_FLAGS (FLAG (OT_C) | FLAG (OT_CM) | FLAG (OT_Ra) | FLAG (OT_V) | FLAG (OT_NBSP) | FLAG (OT_GB))
 static inline bool
 is_consonant (const hb_glyph_info_t &info)
 {
@@ -175,82 +169,80 @@ set_myanmar_properties (hb_glyph_info_t &info)
 {
   hb_codepoint_t u = info.codepoint;
   unsigned int type = hb_indic_get_categories (u);
-  indic_category_t cat = (indic_category_t) (type & 0x7F);
+  indic_category_t cat = (indic_category_t) (type & 0x7Fu);
   indic_position_t pos = (indic_position_t) (type >> 8);
 
   /* Myanmar
    * http://www.microsoft.com/typography/OpenTypeDev/myanmar/intro.htm#analyze
    */
-  if (unlikely (hb_in_range<hb_codepoint_t> (u, 0xFE00, 0xFE0F)))
+  if (unlikely (hb_in_range (u, 0xFE00u, 0xFE0Fu)))
     cat = (indic_category_t) OT_VS;
-  else if (unlikely (u == 0x200C)) cat = (indic_category_t) OT_ZWNJ;
-  else if (unlikely (u == 0x200D)) cat = (indic_category_t) OT_ZWJ;
 
   switch (u)
   {
-    case 0x104E:
+    case 0x104Eu:
       cat = (indic_category_t) OT_C; /* The spec says C, IndicSyllableCategory doesn't have. */
       break;
 
-    case 0x002D: case 0x00A0: case 0x00D7: case 0x2012:
-    case 0x2013: case 0x2014: case 0x2015: case 0x2022:
-    case 0x25CC: case 0x25FB: case 0x25FC: case 0x25FD:
-    case 0x25FE:
+    case 0x002Du: case 0x00A0u: case 0x00D7u: case 0x2012u:
+    case 0x2013u: case 0x2014u: case 0x2015u: case 0x2022u:
+    case 0x25CCu: case 0x25FBu: case 0x25FCu: case 0x25FDu:
+    case 0x25FEu:
       cat = (indic_category_t) OT_GB;
       break;
 
-    case 0x1004: case 0x101B: case 0x105A:
+    case 0x1004u: case 0x101Bu: case 0x105Au:
       cat = (indic_category_t) OT_Ra;
       break;
 
-    case 0x1032: case 0x1036:
+    case 0x1032u: case 0x1036u:
       cat = (indic_category_t) OT_A;
       break;
 
-    case 0x103A:
+    case 0x103Au:
       cat = (indic_category_t) OT_As;
       break;
 
-    case 0x1041: case 0x1042: case 0x1043: case 0x1044:
-    case 0x1045: case 0x1046: case 0x1047: case 0x1048:
-    case 0x1049: case 0x1090: case 0x1091: case 0x1092:
-    case 0x1093: case 0x1094: case 0x1095: case 0x1096:
-    case 0x1097: case 0x1098: case 0x1099:
+    case 0x1041u: case 0x1042u: case 0x1043u: case 0x1044u:
+    case 0x1045u: case 0x1046u: case 0x1047u: case 0x1048u:
+    case 0x1049u: case 0x1090u: case 0x1091u: case 0x1092u:
+    case 0x1093u: case 0x1094u: case 0x1095u: case 0x1096u:
+    case 0x1097u: case 0x1098u: case 0x1099u:
       cat = (indic_category_t) OT_D;
       break;
 
-    case 0x1040:
+    case 0x1040u:
       cat = (indic_category_t) OT_D; /* XXX The spec says D0, but Uniscribe doesn't seem to do. */
       break;
 
-    case 0x103E: case 0x1060:
+    case 0x103Eu: case 0x1060u:
       cat = (indic_category_t) OT_MH;
       break;
 
-    case 0x103C:
+    case 0x103Cu:
       cat = (indic_category_t) OT_MR;
       break;
 
-    case 0x103D: case 0x1082:
+    case 0x103Du: case 0x1082u:
       cat = (indic_category_t) OT_MW;
       break;
 
-    case 0x103B: case 0x105E: case 0x105F:
+    case 0x103Bu: case 0x105Eu: case 0x105Fu:
       cat = (indic_category_t) OT_MY;
       break;
 
-    case 0x1063: case 0x1064: case 0x1069: case 0x106A:
-    case 0x106B: case 0x106C: case 0x106D: case 0xAA7B:
+    case 0x1063u: case 0x1064u: case 0x1069u: case 0x106Au:
+    case 0x106Bu: case 0x106Cu: case 0x106Du: case 0xAA7Bu:
       cat = (indic_category_t) OT_PT;
       break;
 
-    case 0x1038: case 0x1087: case 0x1088: case 0x1089:
-    case 0x108A: case 0x108B: case 0x108C: case 0x108D:
-    case 0x108F: case 0x109A: case 0x109B: case 0x109C:
+    case 0x1038u: case 0x1087u: case 0x1088u: case 0x1089u:
+    case 0x108Au: case 0x108Bu: case 0x108Cu: case 0x108Du:
+    case 0x108Fu: case 0x109Au: case 0x109Bu: case 0x109Cu:
       cat = (indic_category_t) OT_SM;
       break;
 
-    case 0x104A: case 0x104B:
+    case 0x104Au: case 0x104Bu:
       cat = (indic_category_t) OT_P;
       break;
   }
@@ -285,8 +277,9 @@ setup_masks_myanmar (const hb_ot_shape_plan_t *plan HB_UNUSED,
    * and setup masks later on in a pause-callback. */
 
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    set_myanmar_properties (buffer->info[i]);
+    set_myanmar_properties (info[i]);
 }
 
 static void
@@ -459,8 +452,10 @@ insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED,
   /* Note: This loop is extra overhead, but should not be measurable. */
   bool has_broken_syllables = false;
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if ((buffer->info[i].syllable() & 0x0F) == broken_cluster) {
+    if ((info[i].syllable() & 0x0F) == broken_cluster)
+    {
       has_broken_syllables = true;
       break;
     }
@@ -469,11 +464,11 @@ insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED,
 
 
   hb_codepoint_t dottedcircle_glyph;
-  if (!font->get_glyph (0x25CC, 0, &dottedcircle_glyph))
+  if (!font->get_glyph (0x25CCu, 0, &dottedcircle_glyph))
     return;
 
   hb_glyph_info_t dottedcircle = {0};
-  dottedcircle.codepoint = 0x25CC;
+  dottedcircle.codepoint = 0x25CCu;
   set_myanmar_properties (dottedcircle);
   dottedcircle.codepoint = dottedcircle_glyph;
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-private.hh
index 104726e8af..3e581afa9c 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-private.hh
@@ -173,6 +173,10 @@ hb_ot_shape_complex_categorize (const hb_ot_shape_planner_t *planner)
     /* Unicode-6.0 additions */
     case HB_SCRIPT_MANDAIC:
 
+    /* Unicode-7.0 additions */
+    case HB_SCRIPT_MANICHAEAN:
+    case HB_SCRIPT_PSALTER_PAHLAVI:
+
       /* For Arabic script, use the Arabic shaper even if no OT script tag was found.
        * This is because we do fallback shaping for Arabic script (and not others). */
       if (planner->map.chosen_script[0] != HB_OT_TAG_DEFAULT_SCRIPT ||
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-sea.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-sea.cc
index 6288a90c9a..f08b7ccb9f 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-sea.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-sea.cc
@@ -139,11 +139,11 @@ set_sea_properties (hb_glyph_info_t &info)
 {
   hb_codepoint_t u = info.codepoint;
   unsigned int type = hb_indic_get_categories (u);
-  indic_category_t cat = (indic_category_t) (type & 0x7F);
+  indic_category_t cat = (indic_category_t) (type & 0x7Fu);
   indic_position_t pos = (indic_position_t) (type >> 8);
 
   /* Medial Ra */
-  if (u == 0x1A55 || u == 0xAA34)
+  if (u == 0x1A55u || u == 0xAA34u)
     cat = (indic_category_t) OT_MR;
 
   if (cat == OT_M)
@@ -174,8 +174,9 @@ setup_masks_sea (const hb_ot_shape_plan_t *plan HB_UNUSED,
    * and setup masks later on in a pause-callback. */
 
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    set_sea_properties (buffer->info[i]);
+    set_sea_properties (info[i]);
 }
 
 static void
@@ -278,8 +279,10 @@ insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED,
   /* Note: This loop is extra overhead, but should not be measurable. */
   bool has_broken_syllables = false;
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if ((buffer->info[i].syllable() & 0x0F) == broken_cluster) {
+    if ((info[i].syllable() & 0x0F) == broken_cluster)
+    {
       has_broken_syllables = true;
       break;
     }
@@ -288,11 +291,11 @@ insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED,
 
 
   hb_codepoint_t dottedcircle_glyph;
-  if (!font->get_glyph (0x25CC, 0, &dottedcircle_glyph))
+  if (!font->get_glyph (0x25CCu, 0, &dottedcircle_glyph))
     return;
 
   hb_glyph_info_t dottedcircle = {0};
-  dottedcircle.codepoint = 0x25CC;
+  dottedcircle.codepoint = 0x25CCu;
   set_sea_properties (dottedcircle);
   dottedcircle.codepoint = dottedcircle_glyph;
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-thai.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-thai.cc
index 8664eca45c..feb7fc7a14 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-thai.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-complex-thai.cc
@@ -46,13 +46,13 @@ enum thai_consonant_type_t
 static thai_consonant_type_t
 get_consonant_type (hb_codepoint_t u)
 {
-  if (u == 0x0E1B || u == 0x0E1D || u == 0x0E1F/* || u == 0x0E2C*/)
+  if (u == 0x0E1Bu || u == 0x0E1Du || u == 0x0E1Fu/* || u == 0x0E2Cu*/)
     return AC;
-  if (u == 0x0E0D || u == 0x0E10)
+  if (u == 0x0E0Du || u == 0x0E10u)
     return RC;
-  if (u == 0x0E0E || u == 0x0E0F)
+  if (u == 0x0E0Eu || u == 0x0E0Fu)
     return DC;
-  if (hb_in_range<hb_codepoint_t> (u, 0x0E01, 0x0E2E))
+  if (hb_in_range (u, 0x0E01u, 0x0E2Eu))
     return NC;
   return NOT_CONSONANT;
 }
@@ -70,12 +70,12 @@ enum thai_mark_type_t
 static thai_mark_type_t
 get_mark_type (hb_codepoint_t u)
 {
-  if (u == 0x0E31 || hb_in_range<hb_codepoint_t> (u, 0x0E34, 0x0E37) ||
-      u == 0x0E47 || hb_in_range<hb_codepoint_t> (u, 0x0E4D, 0x0E4E))
+  if (u == 0x0E31u || hb_in_range (u, 0x0E34u, 0x0E37u) ||
+      u == 0x0E47u || hb_in_range (u, 0x0E4Du, 0x0E4Eu))
     return AV;
-  if (hb_in_range<hb_codepoint_t> (u, 0x0E38, 0x0E3A))
+  if (hb_in_range (u, 0x0E38u, 0x0E3Au))
     return BV;
-  if (hb_in_range<hb_codepoint_t> (u, 0x0E48, 0x0E4C))
+  if (hb_in_range (u, 0x0E48u, 0x0E4Cu))
     return T;
   return NOT_MARK;
 }
@@ -99,43 +99,43 @@ thai_pua_shape (hb_codepoint_t u, thai_action_t action, hb_font_t *font)
     hb_codepoint_t mac_pua;
   } const *pua_mappings = NULL;
   static const thai_pua_mapping_t SD_mappings[] = {
-    {0x0E48, 0xF70A, 0xF88B}, /* MAI EK */
-    {0x0E49, 0xF70B, 0xF88E}, /* MAI THO */
-    {0x0E4A, 0xF70C, 0xF891}, /* MAI TRI */
-    {0x0E4B, 0xF70D, 0xF894}, /* MAI CHATTAWA */
-    {0x0E4C, 0xF70E, 0xF897}, /* THANTHAKHAT */
-    {0x0E38, 0xF718, 0xF89B}, /* SARA U */
-    {0x0E39, 0xF719, 0xF89C}, /* SARA UU */
-    {0x0E3A, 0xF71A, 0xF89D}, /* PHINTHU */
-    {0x0000, 0x0000, 0x0000}
+    {0x0E48u, 0xF70Au, 0xF88Bu}, /* MAI EK */
+    {0x0E49u, 0xF70Bu, 0xF88Eu}, /* MAI THO */
+    {0x0E4Au, 0xF70Cu, 0xF891u}, /* MAI TRI */
+    {0x0E4Bu, 0xF70Du, 0xF894u}, /* MAI CHATTAWA */
+    {0x0E4Cu, 0xF70Eu, 0xF897u}, /* THANTHAKHAT */
+    {0x0E38u, 0xF718u, 0xF89Bu}, /* SARA U */
+    {0x0E39u, 0xF719u, 0xF89Cu}, /* SARA UU */
+    {0x0E3Au, 0xF71Au, 0xF89Du}, /* PHINTHU */
+    {0x0000u, 0x0000u, 0x0000u}
   };
   static const thai_pua_mapping_t SDL_mappings[] = {
-    {0x0E48, 0xF705, 0xF88C}, /* MAI EK */
-    {0x0E49, 0xF706, 0xF88F}, /* MAI THO */
-    {0x0E4A, 0xF707, 0xF892}, /* MAI TRI */
-    {0x0E4B, 0xF708, 0xF895}, /* MAI CHATTAWA */
-    {0x0E4C, 0xF709, 0xF898}, /* THANTHAKHAT */
-    {0x0000, 0x0000, 0x0000}
+    {0x0E48u, 0xF705u, 0xF88Cu}, /* MAI EK */
+    {0x0E49u, 0xF706u, 0xF88Fu}, /* MAI THO */
+    {0x0E4Au, 0xF707u, 0xF892u}, /* MAI TRI */
+    {0x0E4Bu, 0xF708u, 0xF895u}, /* MAI CHATTAWA */
+    {0x0E4Cu, 0xF709u, 0xF898u}, /* THANTHAKHAT */
+    {0x0000u, 0x0000u, 0x0000u}
   };
   static const thai_pua_mapping_t SL_mappings[] = {
-    {0x0E48, 0xF713, 0xF88A}, /* MAI EK */
-    {0x0E49, 0xF714, 0xF88D}, /* MAI THO */
-    {0x0E4A, 0xF715, 0xF890}, /* MAI TRI */
-    {0x0E4B, 0xF716, 0xF893}, /* MAI CHATTAWA */
-    {0x0E4C, 0xF717, 0xF896}, /* THANTHAKHAT */
-    {0x0E31, 0xF710, 0xF884}, /* MAI HAN-AKAT */
-    {0x0E34, 0xF701, 0xF885}, /* SARA I */
-    {0x0E35, 0xF702, 0xF886}, /* SARA II */
-    {0x0E36, 0xF703, 0xF887}, /* SARA UE */
-    {0x0E37, 0xF704, 0xF888}, /* SARA UEE */
-    {0x0E47, 0xF712, 0xF889}, /* MAITAIKHU */
-    {0x0E4D, 0xF711, 0xF899}, /* NIKHAHIT */
-    {0x0000, 0x0000, 0x0000}
+    {0x0E48u, 0xF713u, 0xF88Au}, /* MAI EK */
+    {0x0E49u, 0xF714u, 0xF88Du}, /* MAI THO */
+    {0x0E4Au, 0xF715u, 0xF890u}, /* MAI TRI */
+    {0x0E4Bu, 0xF716u, 0xF893u}, /* MAI CHATTAWA */
+    {0x0E4Cu, 0xF717u, 0xF896u}, /* THANTHAKHAT */
+    {0x0E31u, 0xF710u, 0xF884u}, /* MAI HAN-AKAT */
+    {0x0E34u, 0xF701u, 0xF885u}, /* SARA I */
+    {0x0E35u, 0xF702u, 0xF886u}, /* SARA II */
+    {0x0E36u, 0xF703u, 0xF887u}, /* SARA UE */
+    {0x0E37u, 0xF704u, 0xF888u}, /* SARA UEE */
+    {0x0E47u, 0xF712u, 0xF889u}, /* MAITAIKHU */
+    {0x0E4Du, 0xF711u, 0xF899u}, /* NIKHAHIT */
+    {0x0000u, 0x0000u, 0x0000u}
   };
   static const thai_pua_mapping_t RD_mappings[] = {
-    {0x0E0D, 0xF70F, 0xF89A}, /* YO YING */
-    {0x0E10, 0xF700, 0xF89E}, /* THO THAN */
-    {0x0000, 0x0000, 0x0000}
+    {0x0E0Du, 0xF70Fu, 0xF89Au}, /* YO YING */
+    {0x0E10u, 0xF700u, 0xF89Eu}, /* THO THAN */
+    {0x0000u, 0x0000u, 0x0000u}
   };
 
   switch (action) {
@@ -308,10 +308,10 @@ preprocess_text_thai (const hb_ot_shape_plan_t *plan,
 
   /* We only get one script at a time, so a script-agnostic implementation
    * is adequate here. */
-#define IS_SARA_AM(x) (((x) & ~0x0080) == 0x0E33)
-#define NIKHAHIT_FROM_SARA_AM(x) ((x) - 0xE33 + 0xE4D)
+#define IS_SARA_AM(x) (((x) & ~0x0080u) == 0x0E33u)
+#define NIKHAHIT_FROM_SARA_AM(x) ((x) - 0x0E33u + 0x0E4Du)
 #define SARA_AA_FROM_SARA_AM(x) ((x) - 1)
-#define IS_TONE_MARK(x) (hb_in_ranges<hb_codepoint_t> ((x) & ~0x0080, 0x0E34, 0x0E37, 0x0E47, 0x0E4E, 0x0E31, 0x0E31))
+#define IS_TONE_MARK(x) (hb_in_ranges ((x) & ~0x0080u, 0x0E34u, 0x0E37u, 0x0E47u, 0x0E4Eu, 0x0E31u, 0x0E31u))
 
   buffer->clear_output ();
   unsigned int count = buffer->len;
@@ -330,8 +330,11 @@ preprocess_text_thai (const hb_ot_shape_plan_t *plan,
     if (unlikely (buffer->in_error))
       return;
 
-    /* Ok, let's see... */
+    /* Make Nikhahit be recognized as a mark when zeroing widths. */
     unsigned int end = buffer->out_len;
+    _hb_glyph_info_set_general_category (&buffer->out_info[end - 2], HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK);
+
+    /* Ok, let's see... */
     unsigned int start = end - 2;
     while (start > 0 && IS_TONE_MARK (buffer->out_info[start - 1].codepoint))
       start--;
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-fallback.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-fallback.cc
index 5d526c3a8e..a774f95185 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-fallback.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-fallback.cc
@@ -35,42 +35,42 @@ recategorize_combining_class (hb_codepoint_t u,
     return klass;
 
   /* Thai / Lao need some per-character work. */
-  if ((u & ~0xFF) == 0x0E00)
+  if ((u & ~0xFF) == 0x0E00u)
   {
     if (unlikely (klass == 0))
     {
       switch (u)
       {
-        case 0x0E31:
-        case 0x0E34:
-        case 0x0E35:
-        case 0x0E36:
-        case 0x0E37:
-        case 0x0E47:
-        case 0x0E4C:
-        case 0x0E4D:
-        case 0x0E4E:
+        case 0x0E31u:
+        case 0x0E34u:
+        case 0x0E35u:
+        case 0x0E36u:
+        case 0x0E37u:
+        case 0x0E47u:
+        case 0x0E4Cu:
+        case 0x0E4Du:
+        case 0x0E4Eu:
 	  klass = HB_UNICODE_COMBINING_CLASS_ABOVE_RIGHT;
 	  break;
 
-        case 0x0EB1:
-        case 0x0EB4:
-        case 0x0EB5:
-        case 0x0EB6:
-        case 0x0EB7:
-        case 0x0EBB:
-        case 0x0ECC:
-        case 0x0ECD:
+        case 0x0EB1u:
+        case 0x0EB4u:
+        case 0x0EB5u:
+        case 0x0EB6u:
+        case 0x0EB7u:
+        case 0x0EBBu:
+        case 0x0ECCu:
+        case 0x0ECDu:
 	  klass = HB_UNICODE_COMBINING_CLASS_ABOVE;
 	  break;
 
-        case 0x0EBC:
+        case 0x0EBCu:
 	  klass = HB_UNICODE_COMBINING_CLASS_BELOW;
 	  break;
       }
     } else {
       /* Thai virama is below-right */
-      if (u == 0x0E3A)
+      if (u == 0x0E3Au)
 	klass = HB_UNICODE_COMBINING_CLASS_BELOW_RIGHT;
     }
   }
@@ -167,11 +167,12 @@ _hb_ot_shape_fallback_position_recategorize_marks (const hb_ot_shape_plan_t *pla
 						   hb_buffer_t  *buffer)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if (_hb_glyph_info_get_general_category (&buffer->info[i]) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK) {
-      unsigned int combining_class = _hb_glyph_info_get_modified_combining_class (&buffer->info[i]);
-      combining_class = recategorize_combining_class (buffer->info[i].codepoint, combining_class);
-      _hb_glyph_info_set_modified_combining_class (&buffer->info[i], combining_class);
+    if (_hb_glyph_info_get_general_category (&info[i]) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK) {
+      unsigned int combining_class = _hb_glyph_info_get_modified_combining_class (&info[i]);
+      combining_class = recategorize_combining_class (info[i].codepoint, combining_class);
+      _hb_glyph_info_set_modified_combining_class (&info[i], combining_class);
     }
 }
 
@@ -181,8 +182,9 @@ zero_mark_advances (hb_buffer_t *buffer,
 		    unsigned int start,
 		    unsigned int end)
 {
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = start; i < end; i++)
-    if (_hb_glyph_info_get_general_category (&buffer->info[i]) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)
+    if (_hb_glyph_info_get_general_category (&info[i]) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)
     {
       buffer->pos[i].x_advance = 0;
       buffer->pos[i].y_advance = 0;
@@ -327,12 +329,13 @@ position_around_base (const hb_ot_shape_plan_t *plan,
   unsigned int last_lig_component = (unsigned int) -1;
   unsigned int last_combining_class = 255;
   hb_glyph_extents_t cluster_extents = base_extents; /* Initialization is just to shut gcc up. */
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = base + 1; i < end; i++)
-    if (_hb_glyph_info_get_modified_combining_class (&buffer->info[i]))
+    if (_hb_glyph_info_get_modified_combining_class (&info[i]))
     {
       if (num_lig_components > 1) {
-	unsigned int this_lig_id = _hb_glyph_info_get_lig_id (&buffer->info[i]);
-	unsigned int this_lig_component = _hb_glyph_info_get_lig_comp (&buffer->info[i]) - 1;
+	unsigned int this_lig_id = _hb_glyph_info_get_lig_id (&info[i]);
+	unsigned int this_lig_component = _hb_glyph_info_get_lig_comp (&info[i]) - 1;
 	/* Conditions for attaching to the last component. */
 	if (!lig_id || lig_id != this_lig_id || this_lig_component >= num_lig_components)
 	  this_lig_component = num_lig_components - 1;
@@ -355,7 +358,7 @@ position_around_base (const hb_ot_shape_plan_t *plan,
 	}
       }
 
-      unsigned int this_combining_class = _hb_glyph_info_get_modified_combining_class (&buffer->info[i]);
+      unsigned int this_combining_class = _hb_glyph_info_get_modified_combining_class (&info[i]);
       if (last_combining_class != this_combining_class)
       {
 	last_combining_class = this_combining_class;
@@ -391,13 +394,14 @@ position_cluster (const hb_ot_shape_plan_t *plan,
     return;
 
   /* Find the base glyph */
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = start; i < end; i++)
-    if (!HB_UNICODE_GENERAL_CATEGORY_IS_MARK (_hb_glyph_info_get_general_category (&buffer->info[i])))
+    if (!HB_UNICODE_GENERAL_CATEGORY_IS_MARK (_hb_glyph_info_get_general_category (&info[i])))
     {
       /* Find mark glyphs */
       unsigned int j;
       for (j = i + 1; j < end; j++)
-	if (!HB_UNICODE_GENERAL_CATEGORY_IS_MARK (_hb_glyph_info_get_general_category (&buffer->info[j])))
+	if (!HB_UNICODE_GENERAL_CATEGORY_IS_MARK (_hb_glyph_info_get_general_category (&info[j])))
 	  break;
 
       position_around_base (plan, font, buffer, i, j);
@@ -432,15 +436,13 @@ _hb_ot_shape_fallback_kern (const hb_ot_shape_plan_t *plan,
 {
   if (!plan->has_kern) return;
 
-  unsigned int count = buffer->len;
-
   OT::hb_apply_context_t c (1, font, buffer);
   c.set_lookup_mask (plan->kern_mask);
   c.set_lookup_props (OT::LookupFlag::IgnoreMarks);
 
+  unsigned int count = buffer->len;
   hb_glyph_info_t *info = buffer->info;
   hb_glyph_position_t *pos = buffer->pos;
-
   for (unsigned int idx = 0; idx < count;)
   {
     OT::hb_apply_context_t::skipping_forward_iterator_t skippy_iter (&c, idx, 1);
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-private.hh
index df81fa25d9..54ac2c3cf7 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape-private.hh
@@ -44,6 +44,7 @@ struct hb_ot_shape_plan_t
   hb_mask_t kern_mask;
   unsigned int has_frac : 1;
   unsigned int has_kern : 1;
+  unsigned int has_mark : 1;
 
   inline void collect_lookups (hb_tag_t table_tag, hb_set_t *lookups) const
   {
@@ -92,6 +93,7 @@ struct hb_ot_shape_planner_t
 
     plan.has_frac = plan.frac_mask || (plan.numr_mask && plan.dnom_mask);
     plan.has_kern = !!plan.kern_mask;
+    plan.has_mark = !!plan.map.get_1_mask (HB_TAG ('m','a','r','k'));
   }
 
   private:
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.cc
index 3080a1d03d..1f99014c62 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.cc
@@ -37,6 +37,7 @@
 #include "hb-ot-shape-normalize-private.hh"
 
 #include "hb-ot-layout-private.hh"
+#include "hb-unicode-private.hh"
 #include "hb-set-private.hh"
 
 
@@ -226,8 +227,9 @@ static void
 hb_set_unicode_props (hb_buffer_t *buffer)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    _hb_glyph_info_set_unicode_props (&buffer->info[i], buffer->unicode);
+    _hb_glyph_info_set_unicode_props (&info[i], buffer->unicode);
 }
 
 static void
@@ -238,11 +240,11 @@ hb_insert_dotted_circle (hb_buffer_t *buffer, hb_font_t *font)
       HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)
     return;
 
-  if (!font->has_glyph (0x25CC))
+  if (!font->has_glyph (0x25CCu))
     return;
 
   hb_glyph_info_t dottedcircle;
-  dottedcircle.codepoint = 0x25CC;
+  dottedcircle.codepoint = 0x25CCu;
   _hb_glyph_info_set_unicode_props (&dottedcircle, buffer->unicode);
 
   buffer->clear_output ();
@@ -262,8 +264,9 @@ static void
 hb_form_clusters (hb_buffer_t *buffer)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 1; i < count; i++)
-    if (HB_UNICODE_GENERAL_CATEGORY_IS_MARK (_hb_glyph_info_get_general_category (&buffer->info[i])))
+    if (HB_UNICODE_GENERAL_CATEGORY_IS_MARK (_hb_glyph_info_get_general_category (&info[i])))
       buffer->merge_clusters (i - 1, i + 1);
 }
 
@@ -321,7 +324,7 @@ hb_ot_shape_setup_masks_fraction (hb_ot_shape_context_t *c)
   hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
   {
-    if (info[i].codepoint == 0x2044) /* FRACTION SLASH */
+    if (info[i].codepoint == 0x2044u) /* FRACTION SLASH */
     {
       unsigned int start = i, end = i + 1;
       while (start &&
@@ -381,8 +384,9 @@ hb_ot_map_glyphs_fast (hb_buffer_t  *buffer)
 {
   /* Normalization process sets up glyph_index(), we just copy it. */
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    buffer->info[i].codepoint = buffer->info[i].glyph_index();
+    info[i].codepoint = info[i].glyph_index();
 }
 
 static inline void
@@ -391,11 +395,24 @@ hb_synthesize_glyph_classes (hb_ot_shape_context_t *c)
   unsigned int count = c->buffer->len;
   hb_glyph_info_t *info = c->buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    _hb_glyph_info_set_glyph_props (&info[i],
-				    _hb_glyph_info_get_general_category (&info[i])
-				    == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK ?
-				    HB_OT_LAYOUT_GLYPH_PROPS_MARK :
-				    HB_OT_LAYOUT_GLYPH_PROPS_BASE_GLYPH);
+  {
+    hb_ot_layout_glyph_class_mask_t klass;
+
+    /* Never mark default-ignorables as marks.
+     * They won't get in the way of lookups anyway,
+     * but having them as mark will cause them to be skipped
+     * over if the lookup-flag says so, but at least for the
+     * Mongolian variation selectors, looks like Uniscribe
+     * marks them as non-mark.  Some Mongolian fonts without
+     * GDEF rely on this.  Another notable character that
+     * this applies to is COMBINING GRAPHEME JOINER. */
+    klass = (_hb_glyph_info_get_general_category (&info[i]) !=
+	     HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK ||
+	     _hb_glyph_info_is_default_ignorable (&info[i])) ?
+	    HB_OT_LAYOUT_GLYPH_PROPS_BASE_GLYPH :
+	    HB_OT_LAYOUT_GLYPH_PROPS_MARK;
+    _hb_glyph_info_set_glyph_props (&info[i], klass);
+  }
 }
 
 static inline void
@@ -452,26 +469,44 @@ hb_ot_substitute (hb_ot_shape_context_t *c)
 /* Position */
 
 static inline void
-zero_mark_widths_by_unicode (hb_buffer_t *buffer)
+adjust_mark_offsets (hb_glyph_position_t *pos)
+{
+  pos->x_offset -= pos->x_advance;
+  pos->y_offset -= pos->y_advance;
+}
+
+static inline void
+zero_mark_width (hb_glyph_position_t *pos)
+{
+  pos->x_advance = 0;
+  pos->y_advance = 0;
+}
+
+static inline void
+zero_mark_widths_by_unicode (hb_buffer_t *buffer, bool adjust_offsets)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if (_hb_glyph_info_get_general_category (&buffer->info[i]) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)
+    if (_hb_glyph_info_get_general_category (&info[i]) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)
     {
-      buffer->pos[i].x_advance = 0;
-      buffer->pos[i].y_advance = 0;
+      if (adjust_offsets)
+        adjust_mark_offsets (&buffer->pos[i]);
+      zero_mark_width (&buffer->pos[i]);
     }
 }
 
 static inline void
-zero_mark_widths_by_gdef (hb_buffer_t *buffer)
+zero_mark_widths_by_gdef (hb_buffer_t *buffer, bool adjust_offsets)
 {
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    if (_hb_glyph_info_is_mark (&buffer->info[i]))
+    if (_hb_glyph_info_is_mark (&info[i]))
     {
-      buffer->pos[i].x_advance = 0;
-      buffer->pos[i].y_advance = 0;
+      if (adjust_offsets)
+        adjust_mark_offsets (&buffer->pos[i]);
+      zero_mark_width (&buffer->pos[i]);
     }
 }
 
@@ -501,16 +536,28 @@ hb_ot_position_complex (hb_ot_shape_context_t *c)
 {
   bool ret = false;
   unsigned int count = c->buffer->len;
+  bool has_positioning = hb_ot_layout_has_positioning (c->face);
+  /* If the font has no GPOS, AND, no fallback positioning will
+   * happen, AND, direction is forward, then when zeroing mark
+   * widths, we shift the mark with it, such that the mark
+   * is positioned hanging over the previous glyph.  When
+   * direction is backward we don't shift and it will end up
+   * hanging over the next glyph after the final reordering.
+   * If fallback positinoing happens or GPOS is present, we don't
+   * care.
+   */
+  bool adjust_offsets_when_zeroing = !(has_positioning || c->plan->shaper->fallback_position ||
+                                       HB_DIRECTION_IS_BACKWARD (c->buffer->props.direction));
 
   switch (c->plan->shaper->zero_width_marks)
   {
     case HB_OT_SHAPE_ZERO_WIDTH_MARKS_BY_GDEF_EARLY:
-      zero_mark_widths_by_gdef (c->buffer);
+      zero_mark_widths_by_gdef (c->buffer, adjust_offsets_when_zeroing);
       break;
 
     /* Not currently used for any shaper:
     case HB_OT_SHAPE_ZERO_WIDTH_MARKS_BY_UNICODE_EARLY:
-      zero_mark_widths_by_unicode (c->buffer);
+      zero_mark_widths_by_unicode (c->buffer, adjust_offsets_when_zeroing);
       break;
     */
 
@@ -521,7 +568,7 @@ hb_ot_position_complex (hb_ot_shape_context_t *c)
       break;
   }
 
-  if (hb_ot_layout_has_positioning (c->face))
+  if (has_positioning)
   {
     hb_glyph_info_t *info = c->buffer->info;
     hb_glyph_position_t *pos = c->buffer->pos;
@@ -550,11 +597,11 @@ hb_ot_position_complex (hb_ot_shape_context_t *c)
   switch (c->plan->shaper->zero_width_marks)
   {
     case HB_OT_SHAPE_ZERO_WIDTH_MARKS_BY_UNICODE_LATE:
-      zero_mark_widths_by_unicode (c->buffer);
+      zero_mark_widths_by_unicode (c->buffer, adjust_offsets_when_zeroing);
       break;
 
     case HB_OT_SHAPE_ZERO_WIDTH_MARKS_BY_GDEF_LATE:
-      zero_mark_widths_by_gdef (c->buffer);
+      zero_mark_widths_by_gdef (c->buffer, adjust_offsets_when_zeroing);
       break;
 
     default:
@@ -731,8 +778,9 @@ hb_ot_shape_glyphs_closure (hb_font_t          *font,
   bool mirror = hb_script_get_horizontal_direction (buffer->props.script) == HB_DIRECTION_RTL;
 
   unsigned int count = buffer->len;
+  hb_glyph_info_t *info = buffer->info;
   for (unsigned int i = 0; i < count; i++)
-    add_char (font, buffer->unicode, mirror, buffer->info[i].codepoint, glyphs);
+    add_char (font, buffer->unicode, mirror, info[i].codepoint, glyphs);
 
   hb_set_t lookups;
   lookups.init ();
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.h b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.h
index afe6fe9618..1402f54acc 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-shape.h
@@ -24,31 +24,30 @@
  * Red Hat Author(s): Behdad Esfahbod
  */
 
+#ifndef HB_OT_H_IN
+#error "Include <hb-ot.h> instead."
+#endif
+
 #ifndef HB_OT_SHAPE_H
 #define HB_OT_SHAPE_H
-#define HB_OT_SHAPE_H_IN
 
 #include "hb.h"
 
-#include "hb-ot-layout.h"
-#include "hb-ot-tag.h"
-
 HB_BEGIN_DECLS
 
 /* TODO port to shape-plan / set. */
 void
 hb_ot_shape_glyphs_closure (hb_font_t          *font,
-                hb_buffer_t        *buffer,
-                const hb_feature_t *features,
-                unsigned int        num_features,
-                hb_set_t           *glyphs);
+			    hb_buffer_t        *buffer,
+			    const hb_feature_t *features,
+			    unsigned int        num_features,
+			    hb_set_t           *glyphs);
 
 void
 hb_ot_shape_plan_collect_lookups (hb_shape_plan_t *shape_plan,
-                hb_tag_t         table_tag,
-                hb_set_t        *lookup_indexes /* OUT */);
+				  hb_tag_t         table_tag,
+				  hb_set_t        *lookup_indexes /* OUT */);
 
 HB_END_DECLS
 
-#undef HB_OT_SHAPE_H_IN
 #endif /* HB_OT_SHAPE_H */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot-tag.cc b/src/3rdparty/harfbuzz-ng/src/hb-ot-tag.cc
index 5594ef5074..878dd79b62 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot-tag.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot-tag.cc
@@ -57,7 +57,7 @@ hb_ot_old_tag_from_script (hb_script_t script)
   }
 
   /* Else, just change first char to lowercase and return */
-  return ((hb_tag_t) script) | 0x20000000;
+  return ((hb_tag_t) script) | 0x20000000u;
 }
 
 static hb_script_t
@@ -70,13 +70,13 @@ hb_ot_old_tag_to_script (hb_tag_t tag)
 
   /* Any spaces at the end of the tag are replaced by repeating the last
    * letter.  Eg 'nko ' -> 'Nkoo' */
-  if (unlikely ((tag & 0x0000FF00) == 0x00002000))
-    tag |= (tag >> 8) & 0x0000FF00; /* Copy second letter to third */
-  if (unlikely ((tag & 0x000000FF) == 0x00000020))
-    tag |= (tag >> 8) & 0x000000FF; /* Copy third letter to fourth */
+  if (unlikely ((tag & 0x0000FF00u) == 0x00002000u))
+    tag |= (tag >> 8) & 0x0000FF00u; /* Copy second letter to third */
+  if (unlikely ((tag & 0x000000FFu) == 0x00000020u))
+    tag |= (tag >> 8) & 0x000000FFu; /* Copy third letter to fourth */
 
   /* Change first char to uppercase and return */
-  return (hb_script_t) (tag & ~0x20000000);
+  return (hb_script_t) (tag & ~0x20000000u);
 }
 
 static hb_tag_t
@@ -146,7 +146,7 @@ hb_ot_tags_from_script (hb_script_t  script,
 hb_script_t
 hb_ot_tag_to_script (hb_tag_t tag)
 {
-  if (unlikely ((tag & 0x000000FF) == '2'))
+  if (unlikely ((tag & 0x000000FFu) == '2'))
     return hb_ot_new_tag_to_script (tag);
 
   return hb_ot_old_tag_to_script (tag);
@@ -156,7 +156,7 @@ hb_ot_tag_to_script (hb_tag_t tag)
 /* hb_language_t */
 
 typedef struct {
-  char language[6];
+  char language[4];
   hb_tag_t tag;
 } LangTag;
 
@@ -763,12 +763,18 @@ static const LangTag ot_languages[] = {
 /*{"??",	HB_TAG('Z','H','P',' ')},*/	/* Chinese Phonetic */
 };
 
-static const LangTag ot_languages_zh[] = {
+typedef struct {
+  char language[8];
+  hb_tag_t tag;
+} LangTagLong;
+static const LangTagLong ot_languages_zh[] = {
   {"zh-cn",	HB_TAG('Z','H','S',' ')},	/* Chinese (China) */
   {"zh-hk",	HB_TAG('Z','H','H',' ')},	/* Chinese (Hong Kong) */
   {"zh-mo",	HB_TAG('Z','H','T',' ')},	/* Chinese (Macao) */
   {"zh-sg",	HB_TAG('Z','H','S',' ')},	/* Chinese (Singapore) */
-  {"zh-tw",	HB_TAG('Z','H','T',' ')} 	/* Chinese (Taiwan) */
+  {"zh-tw",	HB_TAG('Z','H','T',' ')},	/* Chinese (Taiwan) */
+  {"zh-hans",	HB_TAG('Z','H','S',' ')},	/* Chinese (Simplified) */
+  {"zh-hant",	HB_TAG('Z','H','T',' ')},	/* Chinese (Traditional) */
 };
 
 static int
@@ -800,7 +806,6 @@ hb_tag_t
 hb_ot_tag_from_language (hb_language_t language)
 {
   const char *lang_str, *s;
-  const LangTag *lang_tag;
 
   if (language == HB_LANGUAGE_INVALID)
     return HB_OT_TAG_DEFAULT_LANGUAGE;
@@ -822,11 +827,14 @@ hb_ot_tag_from_language (hb_language_t language)
   }
 
   /* Find a language matching in the first component */
-  lang_tag = (LangTag *) bsearch (lang_str, ot_languages,
-				  ARRAY_LENGTH (ot_languages), sizeof (LangTag),
-				  (hb_compare_func_t) lang_compare_first_component);
-  if (lang_tag)
-    return lang_tag->tag;
+  {
+    const LangTag *lang_tag;
+    lang_tag = (LangTag *) bsearch (lang_str, ot_languages,
+				    ARRAY_LENGTH (ot_languages), sizeof (LangTag),
+				    (hb_compare_func_t) lang_compare_first_component);
+    if (lang_tag)
+      return lang_tag->tag;
+  }
 
   /* Otherwise, check the Chinese ones */
   if (0 == lang_compare_first_component (lang_str, "zh"))
@@ -835,8 +843,9 @@ hb_ot_tag_from_language (hb_language_t language)
 
     for (i = 0; i < ARRAY_LENGTH (ot_languages_zh); i++)
     {
+      const LangTagLong *lang_tag;
       lang_tag = &ot_languages_zh[i];
-      if (lang_matches (lang_tag->language, lang_str))
+      if (lang_matches (lang_str, lang_tag->language))
 	return lang_tag->tag;
     }
 
@@ -849,7 +858,7 @@ hb_ot_tag_from_language (hb_language_t language)
     s = lang_str + strlen (lang_str);
   if (s - lang_str == 3) {
     /* Assume it's ISO-639-3 and upper-case and use it. */
-    return hb_tag_from_string (lang_str, s - lang_str) & ~0x20202000;
+    return hb_tag_from_string (lang_str, s - lang_str) & ~0x20202000u;
   }
 
   return HB_OT_TAG_DEFAULT_LANGUAGE;
@@ -868,21 +877,12 @@ hb_ot_tag_to_language (hb_tag_t tag)
       return hb_language_from_string (ot_languages[i].language, -1);
 
   /* If tag starts with ZH, it's Chinese */
-  if ((tag & 0xFFFF0000)  == 0x5A480000) {
+  if ((tag & 0xFFFF0000u)  == 0x5A480000u) {
     switch (tag) {
       case HB_TAG('Z','H','H',' '): return hb_language_from_string ("zh-hk", -1); /* Hong Kong */
-      default: {
-        /* Encode the tag... */
-	unsigned char buf[14] = "zh-x-hbot";
-	buf[9] = tag >> 24;
-	buf[10] = (tag >> 16) & 0xFF;
-	buf[11] = (tag >> 8) & 0xFF;
-	buf[12] = tag & 0xFF;
-	if (buf[12] == 0x20)
-	  buf[12] = '\0';
-	buf[13] = '\0';
-	return hb_language_from_string ((char *) buf, -1);
-      }
+      case HB_TAG('Z','H','S',' '): return hb_language_from_string ("zh-Hans", -1); /* Simplified */
+      case HB_TAG('Z','H','T',' '): return hb_language_from_string ("zh-Hant", -1); /* Traditional */
+      default: break; /* Fall through */
     }
   }
 
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-ot.h b/src/3rdparty/harfbuzz-ng/src/hb-ot.h
index e9a280b7dd..47c92a58e4 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-ot.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-ot.h
@@ -30,6 +30,7 @@
 
 #include "hb.h"
 
+#include "hb-ot-font.h"
 #include "hb-ot-layout.h"
 #include "hb-ot-tag.h"
 #include "hb-ot-shape.h"
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-private.hh
index 680b21e2cc..3f70d74c26 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-private.hh
@@ -54,23 +54,86 @@
 #include <stdarg.h>
 
 
+/* Compiler attributes */
 
-/* Essentials */
 
-#ifndef NULL
-# define NULL ((void *) 0)
+#if defined(__GNUC__) && (__GNUC__ > 2) && defined(__OPTIMIZE__)
+#define _HB_BOOLEAN_EXPR(expr) ((expr) ? 1 : 0)
+#define likely(expr) (__builtin_expect (_HB_BOOLEAN_EXPR(expr), 1))
+#define unlikely(expr) (__builtin_expect (_HB_BOOLEAN_EXPR(expr), 0))
+#else
+#define likely(expr) (expr)
+#define unlikely(expr) (expr)
 #endif
 
+#ifndef __GNUC__
+#undef __attribute__
+#define __attribute__(x)
+#endif
 
-/* Void! */
-struct _hb_void_t {};
-typedef const _hb_void_t &hb_void_t;
-#define HB_VOID (* (const _hb_void_t *) NULL)
+#if __GNUC__ >= 3
+#define HB_PURE_FUNC	__attribute__((pure))
+#define HB_CONST_FUNC	__attribute__((const))
+#define HB_PRINTF_FUNC(format_idx, arg_idx) __attribute__((__format__ (__printf__, format_idx, arg_idx)))
+#else
+#define HB_PURE_FUNC
+#define HB_CONST_FUNC
+#define HB_PRINTF_FUNC(format_idx, arg_idx)
+#endif
+#if __GNUC__ >= 4
+#define HB_UNUSED	__attribute__((unused))
+#else
+#define HB_UNUSED
+#endif
 
+#ifndef HB_INTERNAL
+# ifndef __MINGW32__
+#  define HB_INTERNAL __attribute__((__visibility__("hidden")))
+# else
+#  define HB_INTERNAL
+# endif
+#endif
+
+#if (defined(__WIN32__) && !defined(__WINE__)) || defined(_MSC_VER)
+#define snprintf _snprintf
+#endif
+
+#ifdef _MSC_VER
+#undef inline
+#define inline __inline
+#endif
+
+#ifdef __STRICT_ANSI__
+#undef inline
+#define inline __inline__
+#endif
+
+#if __GNUC__ >= 3
+#define HB_FUNC __PRETTY_FUNCTION__
+#elif defined(_MSC_VER)
+#define HB_FUNC __FUNCSIG__
+#else
+#define HB_FUNC __func__
+#endif
+
+// Take from https://github.com/behdad/harfbuzz/commit/26a963b9cb4af3119177f277a2d48a5d537458fb
+#if defined(_WIN32_WCE)
+/* Some things not defined on Windows CE. */
+#define MemoryBarrier()
+#define getenv(Name) NULL
+#define setlocale(Category, Locale) "C"
+static int errno = 0; /* Use something better? */
+#elif defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_PC_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
+#define getenv(Name) NULL
+#endif
 
 /* Basics */
 
 
+#ifndef NULL
+# define NULL ((void *) 0)
+#endif
+
 #undef MIN
 template <typename Type>
 static inline Type MIN (const Type &a, const Type &b) { return a < b ? a : b; }
@@ -92,7 +155,7 @@ static inline unsigned int ARRAY_LENGTH (const Type (&)[n]) { return n; }
 #define HB_STMT_START do
 #define HB_STMT_END   while (0)
 
-#define _ASSERT_STATIC1(_line, _cond)	typedef int _static_assert_on_line_##_line##_failed[(_cond)?1:-1]
+#define _ASSERT_STATIC1(_line, _cond)	HB_UNUSED typedef int _static_assert_on_line_##_line##_failed[(_cond)?1:-1]
 #define _ASSERT_STATIC0(_line, _cond)	_ASSERT_STATIC1 (_line, (_cond))
 #define ASSERT_STATIC(_cond)		_ASSERT_STATIC0 (__LINE__, (_cond))
 
@@ -139,7 +202,7 @@ ASSERT_STATIC (sizeof (hb_var_int_t) == 4);
 
 /* Check _assertion in a method environment */
 #define _ASSERT_POD1(_line) \
-	inline void _static_assertion_on_line_##_line (void) const \
+	HB_UNUSED inline void _static_assertion_on_line_##_line (void) const \
 	{ _ASSERT_INSTANCE_POD1 (_line, *this); /* Make sure it's POD. */ }
 # define _ASSERT_POD0(_line)	_ASSERT_POD1 (_line)
 # define ASSERT_POD()		_ASSERT_POD0 (__LINE__)
@@ -148,68 +211,10 @@ ASSERT_STATIC (sizeof (hb_var_int_t) == 4);
 
 /* Misc */
 
-
-#if defined(__GNUC__) && (__GNUC__ > 2) && defined(__OPTIMIZE__)
-#define _HB_BOOLEAN_EXPR(expr) ((expr) ? 1 : 0)
-#define likely(expr) (__builtin_expect (_HB_BOOLEAN_EXPR(expr), 1))
-#define unlikely(expr) (__builtin_expect (_HB_BOOLEAN_EXPR(expr), 0))
-#else
-#define likely(expr) (expr)
-#define unlikely(expr) (expr)
-#endif
-
-#ifndef __GNUC__
-#undef __attribute__
-#define __attribute__(x)
-#endif
-
-#if __GNUC__ >= 3
-#define HB_PURE_FUNC	__attribute__((pure))
-#define HB_CONST_FUNC	__attribute__((const))
-#define HB_PRINTF_FUNC(format_idx, arg_idx) __attribute__((__format__ (__printf__, format_idx, arg_idx)))
-#else
-#define HB_PURE_FUNC
-#define HB_CONST_FUNC
-#define HB_PRINTF_FUNC(format_idx, arg_idx)
-#endif
-#if __GNUC__ >= 4
-#define HB_UNUSED	__attribute__((unused))
-#else
-#define HB_UNUSED
-#endif
-
-#ifndef HB_INTERNAL
-# ifndef __MINGW32__
-#  define HB_INTERNAL __attribute__((__visibility__("hidden")))
-# else
-#  define HB_INTERNAL
-# endif
-#endif
-
-
-#if (defined(__WIN32__) && !defined(__WINE__)) || defined(_MSC_VER)
-#define snprintf _snprintf
-#endif
-
-#ifdef _MSC_VER
-#undef inline
-#define inline __inline
-#endif
-
-#ifdef __STRICT_ANSI__
-#undef inline
-#define inline __inline__
-#endif
-
-
-#if __GNUC__ >= 3
-#define HB_FUNC __PRETTY_FUNCTION__
-#elif defined(_MSC_VER)
-#define HB_FUNC __FUNCSIG__
-#else
-#define HB_FUNC __func__
-#endif
-
+/* Void! */
+struct _hb_void_t {};
+typedef const _hb_void_t &hb_void_t;
+#define HB_VOID (* (const _hb_void_t *) NULL)
 
 /* Return the number of 1 bits in mask. */
 static inline HB_CONST_FUNC unsigned int
@@ -219,7 +224,7 @@ _hb_popcount32 (uint32_t mask)
   return __builtin_popcount (mask);
 #else
   /* "HACKMEM 169" */
-  register uint32_t y;
+  uint32_t y;
   y = (mask >> 1) &033333333333;
   y = mask - y - ((y >>1) & 033333333333);
   return (((y + (y >> 3)) & 030707070707) % 077);
@@ -233,7 +238,7 @@ _hb_bit_storage (unsigned int number)
 #if defined(__GNUC__) && (__GNUC__ >= 4) && defined(__OPTIMIZE__)
   return likely (number) ? (sizeof (unsigned int) * 8 - __builtin_clz (number)) : 0;
 #else
-  register unsigned int n_bits = 0;
+  unsigned int n_bits = 0;
   while (number) {
     n_bits++;
     number >>= 1;
@@ -249,7 +254,7 @@ _hb_ctz (unsigned int number)
 #if defined(__GNUC__) && (__GNUC__ >= 4) && defined(__OPTIMIZE__)
   return likely (number) ? __builtin_ctz (number) : 0;
 #else
-  register unsigned int n_bits = 0;
+  unsigned int n_bits = 0;
   if (unlikely (!number)) return 0;
   while (!(number & 1)) {
     n_bits++;
@@ -276,7 +281,7 @@ typedef int (*hb_compare_func_t) (const void *, const void *);
 
 
 #define HB_PREALLOCED_ARRAY_INIT {0}
-template <typename Type, unsigned int StaticSize>
+template <typename Type, unsigned int StaticSize=16>
 struct hb_prealloced_array_t
 {
   unsigned int len;
@@ -357,14 +362,14 @@ struct hb_prealloced_array_t
     return NULL;
   }
 
-  inline void sort (void)
+  inline void qsort (void)
   {
-    qsort (array, len, sizeof (Type), (hb_compare_func_t) Type::cmp);
+    ::qsort (array, len, sizeof (Type), (hb_compare_func_t) Type::cmp);
   }
 
-  inline void sort (unsigned int start, unsigned int end)
+  inline void qsort (unsigned int start, unsigned int end)
   {
-    qsort (array + start, end - start, sizeof (Type), (hb_compare_func_t) Type::cmp);
+    ::qsort (array + start, end - start, sizeof (Type), (hb_compare_func_t) Type::cmp);
   }
 
   template <typename T>
@@ -387,12 +392,11 @@ struct hb_prealloced_array_t
   }
 };
 
-#define HB_AUTO_ARRAY_PREALLOCED 16
 template <typename Type>
-struct hb_auto_array_t : hb_prealloced_array_t <Type, HB_AUTO_ARRAY_PREALLOCED>
+struct hb_auto_array_t : hb_prealloced_array_t <Type>
 {
-  hb_auto_array_t (void) { hb_prealloced_array_t<Type, HB_AUTO_ARRAY_PREALLOCED>::init (); }
-  ~hb_auto_array_t (void) { hb_prealloced_array_t<Type, HB_AUTO_ARRAY_PREALLOCED>::finish (); }
+  hb_auto_array_t (void) { hb_prealloced_array_t<Type>::init (); }
+  ~hb_auto_array_t (void) { hb_prealloced_array_t<Type>::finish (); }
 };
 
 
@@ -725,7 +729,7 @@ static inline void _hb_warn_no_return (bool returned)
   }
 }
 template <>
-inline void _hb_warn_no_return<hb_void_t> (bool returned HB_UNUSED)
+/*static*/ inline void _hb_warn_no_return<hb_void_t> (bool returned HB_UNUSED)
 {}
 
 template <int max_level, typename ret_t>
@@ -791,20 +795,23 @@ struct hb_auto_trace_t<0, ret_t> {
 
 /* Misc */
 
+template <typename T> class hb_assert_unsigned_t;
+template <> class hb_assert_unsigned_t<unsigned char> {};
+template <> class hb_assert_unsigned_t<unsigned short> {};
+template <> class hb_assert_unsigned_t<unsigned int> {};
+template <> class hb_assert_unsigned_t<unsigned long> {};
 
-/* Pre-mature optimization:
- * Checks for lo <= u <= hi but with an optimization if lo and hi
- * are only different in a contiguous set of lower-most bits.
- */
 template <typename T> static inline bool
 hb_in_range (T u, T lo, T hi)
 {
-  if ( ((lo^hi) & lo) == 0 &&
-       ((lo^hi) & hi) == (lo^hi) &&
-       ((lo^hi) & ((lo^hi) + 1)) == 0 )
-    return (u & ~(lo^hi)) == lo;
-  else
-    return lo <= u && u <= hi;
+  /* The sizeof() is here to force template instantiation.
+   * I'm sure there are better ways to do this but can't think of
+   * one right now.  Declaring a variable won't work as HB_UNUSED
+   * is unsable on some platforms and unused types are less likely
+   * to generate a warning than unused variables. */
+  ASSERT_STATIC (sizeof (hb_assert_unsigned_t<T>) >= 0);
+
+  return (u - lo) <= (hi - lo);
 }
 
 template <typename T> static inline bool
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-shape-plan.cc b/src/3rdparty/harfbuzz-ng/src/hb-shape-plan.cc
index e354f29176..5ffc6b1362 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-shape-plan.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-shape-plan.cc
@@ -104,8 +104,6 @@ hb_shape_plan_create (hb_face_t                     *face,
 		      unsigned int                   num_user_features,
 		      const char * const            *shaper_list)
 {
-  assert (props->direction != HB_DIRECTION_INVALID);
-
   hb_shape_plan_t *shape_plan;
   hb_feature_t *features = NULL;
 
@@ -120,6 +118,8 @@ hb_shape_plan_create (hb_face_t                     *face,
     return hb_shape_plan_get_empty ();
   }
 
+  assert (props->direction != HB_DIRECTION_INVALID);
+
   hb_face_make_immutable (face);
   shape_plan->default_shaper_list = shaper_list == NULL;
   shape_plan->face_unsafe = face;
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-shaper-list.hh b/src/3rdparty/harfbuzz-ng/src/hb-shaper-list.hh
index 5713e057a0..6c537d4921 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-shaper-list.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-shaper-list.hh
@@ -34,25 +34,21 @@
 /* Only picks up fonts that have a "Silf" table. */
 HB_SHAPER_IMPLEMENT (graphite2)
 #endif
-
 #ifdef HAVE_CORETEXT
 /* Only picks up fonts that have a "mort" or "morx" table. */
-HB_SHAPER_IMPLEMENT (coretext)
+HB_SHAPER_IMPLEMENT (coretext_aat)
 #endif
 
 #ifdef HAVE_OT
 HB_SHAPER_IMPLEMENT (ot) /* <--- This is our main OpenType shaper. */
 #endif
 
-#ifdef HAVE_HB_OLD
-HB_SHAPER_IMPLEMENT (old)
-#endif
-#ifdef HAVE_ICU_LE
-HB_SHAPER_IMPLEMENT (icu_le)
-#endif
 #ifdef HAVE_UNISCRIBE
 HB_SHAPER_IMPLEMENT (uniscribe)
 #endif
+#ifdef HAVE_CORETEXT
+HB_SHAPER_IMPLEMENT (coretext)
+#endif
 
 #ifdef HAVE_FALLBACK
 HB_SHAPER_IMPLEMENT (fallback) /* <--- This should be last. */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-unicode-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-unicode-private.hh
index ba193e8fa5..a2c59da274 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-unicode-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-unicode-private.hh
@@ -102,72 +102,70 @@ HB_UNICODE_FUNCS_IMPLEMENT_CALLBACKS_SIMPLE
   }
 
 
-  unsigned int
+  inline unsigned int
   modified_combining_class (hb_codepoint_t unicode)
   {
     /* XXX This hack belongs to the Myanmar shaper. */
-    if (unlikely (unicode == 0x1037)) unicode = 0x103A;
+    if (unlikely (unicode == 0x1037u)) unicode = 0x103Au;
 
     /* XXX This hack belongs to the SEA shaper (for Tai Tham):
      * Reorder SAKOT to ensure it comes after any tone marks. */
-    if (unlikely (unicode == 0x1A60)) return 254;
+    if (unlikely (unicode == 0x1A60u)) return 254;
+
+    /* XXX This hack belongs to the Tibetan shaper:
+     * Reorder PADMA to ensure it comes after any vowel marks. */
+    if (unlikely (unicode == 0x0FC6u)) return 254;
 
     return _hb_modified_combining_class[combining_class (unicode)];
   }
 
-  inline hb_bool_t
+  static inline hb_bool_t
   is_variation_selector (hb_codepoint_t unicode)
   {
-    return unlikely (hb_in_ranges<hb_codepoint_t> (unicode,
-						   0x180B, 0x180D, /* MONGOLIAN FREE VARIATION SELECTOR ONE..THREE */
-						   0xFE00, 0xFE0F, /* VARIATION SELECTOR-1..16 */
-						   0xE0100, 0xE01EF));  /* VARIATION SELECTOR-17..256 */
+    /* U+180B..180D MONGOLIAN FREE VARIATION SELECTORs are handled in the
+     * Arabic shaper.  No need to match them here. */
+    return unlikely (hb_in_ranges (unicode,
+				   0xFE00u, 0xFE0Fu, /* VARIATION SELECTOR-1..16 */
+				   0xE0100u, 0xE01EFu));  /* VARIATION SELECTOR-17..256 */
   }
 
   /* Default_Ignorable codepoints:
    *
-   * Note that as of Oct 2012 (Unicode 6.2), U+180E MONGOLIAN VOWEL SEPARATOR
-   * is NOT Default_Ignorable, but it really behaves in a way that it should
-   * be.  That has been reported to the Unicode Technical Committee for
-   * consideration.  As such, we include it here, since Uniscribe removes it.
-   * It *is* in Unicode 6.3 however.  U+061C ARABIC LETTER MARK from Unicode
-   * 6.3 is also added manually.  The new Unicode 6.3 bidi formatting
-   * characters are encoded in a block that was Default_Ignorable already.
-   *
    * Note: While U+115F, U+1160, U+3164 and U+FFA0 are Default_Ignorable,
    * we do NOT want to hide them, as the way Uniscribe has implemented them
    * is with regular spacing glyphs, and that's the way fonts are made to work.
    * As such, we make exceptions for those four.
    *
-   * Gathered from:
-   * http://unicode.org/cldr/utility/list-unicodeset.jsp?a=[:DI:]&abb=on&ucd=on&esc=on
-   *
-   * Last updated to the page with the following versions:
-   * Version 3.6; ICU version: 50.0.1.0; Unicode version: 6.1.0.0
-   *
-   * 4,167 Code Points
-   *
-   * [\u00AD\u034F\u115F\u1160\u17B4\u17B5\u180B-\u180D\u200B-\u200F\u202A-\u202E\u2060-\u206F\u3164\uFE00-\uFE0F\uFEFF\uFFA0\uFFF0-\uFFF8\U0001D173-\U0001D17A\U000E0000-\U000E0FFF]
-   *
-   * 00AD ;SOFT HYPHEN
-   * 034F ;COMBINING GRAPHEME JOINER
-   * #115F ;HANGUL CHOSEONG FILLER
-   * #1160 ;HANGUL JUNGSEONG FILLER
-   * 17B4 ;KHMER VOWEL INHERENT AQ
-   * 17B5 ;KHMER VOWEL INHERENT AA
-   * 180B..180D ;MONGOLIAN FREE VARIATION SELECTOR THREE
-   * 200B..200F ;RIGHT-TO-LEFT MARK
-   * 202A..202E ;RIGHT-TO-LEFT OVERRIDE
-   * 2060..206F ;NOMINAL DIGIT SHAPES
-   * #3164 ;HANGUL FILLER
-   * FE00..FE0F ;VARIATION SELECTOR-16
-   * FEFF ;ZERO WIDTH NO-BREAK SPACE
-   * #FFA0 ;HALFWIDTH HANGUL FILLER
-   * FFF0..FFF8 ;<unassigned-FFF8>
-   * 1D173..1D17A ;MUSICAL SYMBOL END PHRASE
-   * E0000..E0FFF ;<unassigned-E0FFF>
+   * Unicode 7.0:
+   * $ grep '; Default_Ignorable_Code_Point ' DerivedCoreProperties.txt | sed 's/;.*#/#/'
+   * 00AD          # Cf       SOFT HYPHEN
+   * 034F          # Mn       COMBINING GRAPHEME JOINER
+   * 061C          # Cf       ARABIC LETTER MARK
+   * 115F..1160    # Lo   [2] HANGUL CHOSEONG FILLER..HANGUL JUNGSEONG FILLER
+   * 17B4..17B5    # Mn   [2] KHMER VOWEL INHERENT AQ..KHMER VOWEL INHERENT AA
+   * 180B..180D    # Mn   [3] MONGOLIAN FREE VARIATION SELECTOR ONE..MONGOLIAN FREE VARIATION SELECTOR THREE
+   * 180E          # Cf       MONGOLIAN VOWEL SEPARATOR
+   * 200B..200F    # Cf   [5] ZERO WIDTH SPACE..RIGHT-TO-LEFT MARK
+   * 202A..202E    # Cf   [5] LEFT-TO-RIGHT EMBEDDING..RIGHT-TO-LEFT OVERRIDE
+   * 2060..2064    # Cf   [5] WORD JOINER..INVISIBLE PLUS
+   * 2065          # Cn       <reserved-2065>
+   * 2066..206F    # Cf  [10] LEFT-TO-RIGHT ISOLATE..NOMINAL DIGIT SHAPES
+   * 3164          # Lo       HANGUL FILLER
+   * FE00..FE0F    # Mn  [16] VARIATION SELECTOR-1..VARIATION SELECTOR-16
+   * FEFF          # Cf       ZERO WIDTH NO-BREAK SPACE
+   * FFA0          # Lo       HALFWIDTH HANGUL FILLER
+   * FFF0..FFF8    # Cn   [9] <reserved-FFF0>..<reserved-FFF8>
+   * 1BCA0..1BCA3  # Cf   [4] SHORTHAND FORMAT LETTER OVERLAP..SHORTHAND FORMAT UP STEP
+   * 1D173..1D17A  # Cf   [8] MUSICAL SYMBOL BEGIN BEAM..MUSICAL SYMBOL END PHRASE
+   * E0000         # Cn       <reserved-E0000>
+   * E0001         # Cf       LANGUAGE TAG
+   * E0002..E001F  # Cn  [30] <reserved-E0002>..<reserved-E001F>
+   * E0020..E007F  # Cf  [96] TAG SPACE..CANCEL TAG
+   * E0080..E00FF  # Cn [128] <reserved-E0080>..<reserved-E00FF>
+   * E0100..E01EF  # Mn [240] VARIATION SELECTOR-17..VARIATION SELECTOR-256
+   * E01F0..E0FFF  # Cn [3600] <reserved-E01F0>..<reserved-E0FFF>
    */
-  inline hb_bool_t
+  static inline hb_bool_t
   is_default_ignorable (hb_codepoint_t ch)
   {
     hb_codepoint_t plane = ch >> 16;
@@ -176,16 +174,16 @@ HB_UNICODE_FUNCS_IMPLEMENT_CALLBACKS_SIMPLE
       /* BMP */
       hb_codepoint_t page = ch >> 8;
       switch (page) {
-	case 0x00: return unlikely (ch == 0x00AD);
-	case 0x03: return unlikely (ch == 0x034F);
-	case 0x06: return unlikely (ch == 0x061C);
-	case 0x17: return hb_in_range<hb_codepoint_t> (ch, 0x17B4, 0x17B5);
-	case 0x18: return hb_in_range<hb_codepoint_t> (ch, 0x180B, 0x180E);
-	case 0x20: return hb_in_ranges<hb_codepoint_t> (ch, 0x200B, 0x200F,
-							    0x202A, 0x202E,
-							    0x2060, 0x206F);
-	case 0xFE: return hb_in_range<hb_codepoint_t> (ch, 0xFE00, 0xFE0F) || ch == 0xFEFF;
-	case 0xFF: return hb_in_range<hb_codepoint_t> (ch, 0xFFF0, 0xFFF8);
+	case 0x00: return unlikely (ch == 0x00ADu);
+	case 0x03: return unlikely (ch == 0x034Fu);
+	case 0x06: return unlikely (ch == 0x061Cu);
+	case 0x17: return hb_in_range (ch, 0x17B4u, 0x17B5u);
+	case 0x18: return hb_in_range (ch, 0x180Bu, 0x180Eu);
+	case 0x20: return hb_in_ranges (ch, 0x200Bu, 0x200Fu,
+							    0x202Au, 0x202Eu,
+							    0x2060u, 0x206Fu);
+	case 0xFE: return hb_in_range (ch, 0xFE00u, 0xFE0Fu) || ch == 0xFEFFu;
+	case 0xFF: return hb_in_range (ch, 0xFFF0u, 0xFFF8u);
 	default: return false;
       }
     }
@@ -193,8 +191,9 @@ HB_UNICODE_FUNCS_IMPLEMENT_CALLBACKS_SIMPLE
     {
       /* Other planes */
       switch (plane) {
-	case 0x01: return hb_in_range<hb_codepoint_t> (ch, 0x0001D173, 0x0001D17A);
-	case 0x0E: return hb_in_range<hb_codepoint_t> (ch, 0x000E0000, 0x000E0FFF);
+	case 0x01: return hb_in_ranges (ch, 0x1BCA0u, 0x1BCA3u,
+					    0x1D173u, 0x1D17Au);
+	case 0x0E: return hb_in_range (ch, 0xE0000u, 0xE0FFFu);
 	default: return false;
       }
     }
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-unicode.cc b/src/3rdparty/harfbuzz-ng/src/hb-unicode.cc
index 5b44913bd3..84e5c06fd3 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-unicode.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-unicode.cc
@@ -133,7 +133,7 @@ hb_unicode_funcs_get_default (void)
 
 #ifdef HAVE_GLIB
   HB_UNICODE_FUNCS_IMPLEMENT(glib)
-#elif 0 && defined(HAVE_ICU)
+#elif defined(HAVE_ICU) && defined(HAVE_ICU_BUILTIN)
   HB_UNICODE_FUNCS_IMPLEMENT(icu)
 #elif defined(HAVE_UCDN)
   HB_UNICODE_FUNCS_IMPLEMENT(ucdn)
@@ -146,8 +146,13 @@ hb_unicode_funcs_get_default (void)
 }
 
 #if !defined(HB_NO_UNICODE_FUNCS) && defined(HB_UNICODE_FUNCS_NIL)
-#pragma message("Could not find any Unicode functions implementation, you have to provide your own.")
-#pragma message("To suppress this warnings, define HB_NO_UNICODE_FUNCS.")
+#ifdef _MSC_VER
+#pragma message("Could not find any Unicode functions implementation, you have to provide your own")
+#pragma message("To suppress this warnings, define HB_NO_UNICODE_FUNCS")
+#else
+#warning "Could not find any Unicode functions implementation, you have to provide your own"
+#warning "To suppress this warning, define HB_NO_UNICODE_FUNCS"
+#endif
 #endif
 
 /**
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-utf-private.hh b/src/3rdparty/harfbuzz-ng/src/hb-utf-private.hh
index b9a6519d28..0b798a05c3 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-utf-private.hh
+++ b/src/3rdparty/harfbuzz-ng/src/hb-utf-private.hh
@@ -1,5 +1,5 @@
 /*
- * Copyright © 2011,2012  Google, Inc.
+ * Copyright © 2011,2012,2014  Google, Inc.
  *
  *  This is part of HarfBuzz, a text shaping library.
  *
@@ -29,176 +29,221 @@
 
 #include "hb-private.hh"
 
+template <typename T, bool validate=true> struct hb_utf_t;
+
 
 /* UTF-8 */
 
-#define HB_UTF8_COMPUTE(Char, Mask, Len) \
-  if (Char < 128) { Len = 1; Mask = 0x7f; } \
-  else if ((Char & 0xe0) == 0xc0) { Len = 2; Mask = 0x1f; } \
-  else if ((Char & 0xf0) == 0xe0) { Len = 3; Mask = 0x0f; } \
-  else if ((Char & 0xf8) == 0xf0) { Len = 4; Mask = 0x07; } \
-  else Len = 0;
-
-static inline const uint8_t *
-hb_utf_next (const uint8_t *text,
-	     const uint8_t *end,
-	     hb_codepoint_t *unicode)
+template <>
+struct hb_utf_t<uint8_t, true>
 {
-  hb_codepoint_t c = *text, mask;
-  unsigned int len;
-
-  /* TODO check for overlong sequences? */
-
-  HB_UTF8_COMPUTE (c, mask, len);
-  if (unlikely (!len || (unsigned int) (end - text) < len)) {
-    *unicode = -1;
-    return text + 1;
-  } else {
-    hb_codepoint_t result;
-    unsigned int i;
-    result = c & mask;
-    for (i = 1; i < len; i++)
+  static inline const uint8_t *
+  next (const uint8_t *text,
+	const uint8_t *end,
+	hb_codepoint_t *unicode,
+	hb_codepoint_t replacement)
+  {
+    /* Written to only accept well-formed sequences.
+     * Based on ideas from ICU's U8_NEXT.
+     * Generates one "replacement" for each ill-formed byte. */
+
+    hb_codepoint_t c = *text++;
+
+    if (c > 0x7Fu)
+    {
+      if (hb_in_range (c, 0xC2u, 0xDFu)) /* Two-byte */
       {
-	if (unlikely ((text[i] & 0xc0) != 0x80))
-	  {
-	    *unicode = -1;
-	    return text + 1;
-	  }
-	result <<= 6;
-	result |= (text[i] & 0x3f);
+	unsigned int t1;
+	if (likely (text < end &&
+		    (t1 = text[0] - 0x80u) <= 0x3Fu))
+	{
+	  c = ((c&0x1Fu)<<6) | t1;
+	  text++;
+	}
+	else
+	  goto error;
       }
-    *unicode = result;
-    return text + len;
-  }
-}
+      else if (hb_in_range (c, 0xE0u, 0xEFu)) /* Three-byte */
+      {
+	unsigned int t1, t2;
+	if (likely (1 < end - text &&
+		    (t1 = text[0] - 0x80u) <= 0x3Fu &&
+		    (t2 = text[1] - 0x80u) <= 0x3Fu))
+	{
+	  c = ((c&0xFu)<<12) | (t1<<6) | t2;
+	  if (unlikely (c < 0x0800u || hb_in_range (c, 0xD800u, 0xDFFFu)))
+	    goto error;
+	  text += 2;
+	}
+	else
+	  goto error;
+      }
+      else if (hb_in_range (c, 0xF0u, 0xF4u)) /* Four-byte */
+      {
+	unsigned int t1, t2, t3;
+	if (likely (2 < end - text &&
+		    (t1 = text[0] - 0x80u) <= 0x3Fu &&
+		    (t2 = text[1] - 0x80u) <= 0x3Fu &&
+		    (t3 = text[2] - 0x80u) <= 0x3Fu))
+	{
+	  c = ((c&0x7u)<<18) | (t1<<12) | (t2<<6) | t3;
+	  if (unlikely (!hb_in_range (c, 0x10000u, 0x10FFFFu)))
+	    goto error;
+	  text += 3;
+	}
+	else
+	  goto error;
+      }
+      else
+	goto error;
+    }
 
-static inline const uint8_t *
-hb_utf_prev (const uint8_t *text,
-	     const uint8_t *start,
-	     hb_codepoint_t *unicode)
-{
-  const uint8_t *end = text--;
-  while (start < text && (*text & 0xc0) == 0x80 && end - text < 4)
-    text--;
+    *unicode = c;
+    return text;
+
+  error:
+    *unicode = replacement;
+    return text;
+  }
 
-  hb_codepoint_t c = *text, mask;
-  unsigned int len;
+  static inline const uint8_t *
+  prev (const uint8_t *text,
+	const uint8_t *start,
+	hb_codepoint_t *unicode,
+	hb_codepoint_t replacement)
+  {
+    const uint8_t *end = text--;
+    while (start < text && (*text & 0xc0) == 0x80 && end - text < 4)
+      text--;
 
-  /* TODO check for overlong sequences? */
+    if (likely (next (text, end, unicode, replacement) == end))
+      return text;
 
-  HB_UTF8_COMPUTE (c, mask, len);
-  if (unlikely (!len || (unsigned int) (end - text) != len)) {
-    *unicode = -1;
+    *unicode = replacement;
     return end - 1;
-  } else {
-    hb_codepoint_t result;
-    unsigned int i;
-    result = c & mask;
-    for (i = 1; i < len; i++)
-      {
-	result <<= 6;
-	result |= (text[i] & 0x3f);
-      }
-    *unicode = result;
-    return text;
   }
-}
-
 
-static inline unsigned int
-hb_utf_strlen (const uint8_t *text)
-{
-  return strlen ((const char *) text);
-}
+  static inline unsigned int
+  strlen (const uint8_t *text)
+  {
+    return ::strlen ((const char *) text);
+  }
+};
 
 
 /* UTF-16 */
 
-static inline const uint16_t *
-hb_utf_next (const uint16_t *text,
-	     const uint16_t *end,
-	     hb_codepoint_t *unicode)
+template <>
+struct hb_utf_t<uint16_t, true>
 {
-  hb_codepoint_t c = *text++;
-
-  if (unlikely (hb_in_range<hb_codepoint_t> (c, 0xd800, 0xdbff)))
+  static inline const uint16_t *
+  next (const uint16_t *text,
+	const uint16_t *end,
+	hb_codepoint_t *unicode,
+	hb_codepoint_t replacement)
   {
-    /* high surrogate */
-    hb_codepoint_t l;
-    if (text < end && ((l = *text), likely (hb_in_range<hb_codepoint_t> (l, 0xdc00, 0xdfff))))
+    hb_codepoint_t c = *text++;
+
+    if (likely (!hb_in_range (c, 0xD800u, 0xDFFFu)))
     {
-      /* low surrogate */
-      *unicode = (c << 10) + l - ((0xd800 << 10) - 0x10000 + 0xdc00);
-       text++;
-    } else
-      *unicode = -1;
-  } else
-    *unicode = c;
+      *unicode = c;
+      return text;
+    }
 
-  return text;
-}
+    if (likely (hb_in_range (c, 0xD800u, 0xDBFFu)))
+    {
+      /* High-surrogate in c */
+      hb_codepoint_t l;
+      if (text < end && ((l = *text), likely (hb_in_range (l, 0xDC00u, 0xDFFFu))))
+      {
+	/* Low-surrogate in l */
+	*unicode = (c << 10) + l - ((0xD800u << 10) - 0x10000u + 0xDC00u);
+	 text++;
+	 return text;
+      }
+    }
 
-static inline const uint16_t *
-hb_utf_prev (const uint16_t *text,
-	     const uint16_t *start,
-	     hb_codepoint_t *unicode)
-{
-  hb_codepoint_t c = *--text;
+    /* Lonely / out-of-order surrogate. */
+    *unicode = replacement;
+    return text;
+  }
 
-  if (unlikely (hb_in_range<hb_codepoint_t> (c, 0xdc00, 0xdfff)))
+  static inline const uint16_t *
+  prev (const uint16_t *text,
+	const uint16_t *start,
+	hb_codepoint_t *unicode,
+	hb_codepoint_t replacement)
   {
-    /* low surrogate */
-    hb_codepoint_t h;
-    if (start < text && ((h = *(text - 1)), likely (hb_in_range<hb_codepoint_t> (h, 0xd800, 0xdbff))))
+    const uint16_t *end = text--;
+    hb_codepoint_t c = *text;
+
+    if (likely (!hb_in_range (c, 0xD800u, 0xDFFFu)))
     {
-      /* high surrogate */
-      *unicode = (h << 10) + c - ((0xd800 << 10) - 0x10000 + 0xdc00);
-       text--;
-    } else
-      *unicode = -1;
-  } else
-    *unicode = c;
+      *unicode = c;
+      return text;
+    }
 
-  return text;
-}
+    if (likely (start < text && hb_in_range (c, 0xDC00u, 0xDFFFu)))
+      text--;
 
+    if (likely (next (text, end, unicode, replacement) == end))
+      return text;
 
-static inline unsigned int
-hb_utf_strlen (const uint16_t *text)
-{
-  unsigned int l = 0;
-  while (*text++) l++;
-  return l;
-}
+    *unicode = replacement;
+    return end - 1;
+  }
+
+
+  static inline unsigned int
+  strlen (const uint16_t *text)
+  {
+    unsigned int l = 0;
+    while (*text++) l++;
+    return l;
+  }
+};
 
 
 /* UTF-32 */
 
-static inline const uint32_t *
-hb_utf_next (const uint32_t *text,
-	     const uint32_t *end HB_UNUSED,
-	     hb_codepoint_t *unicode)
+template <bool validate>
+struct hb_utf_t<uint32_t, validate>
 {
-  *unicode = *text++;
-  return text;
-}
-
-static inline const uint32_t *
-hb_utf_prev (const uint32_t *text,
-	     const uint32_t *start HB_UNUSED,
-	     hb_codepoint_t *unicode)
-{
-  *unicode = *--text;
-  return text;
-}
+  static inline const uint32_t *
+  next (const uint32_t *text,
+	const uint32_t *end HB_UNUSED,
+	hb_codepoint_t *unicode,
+	hb_codepoint_t replacement)
+  {
+    hb_codepoint_t c = *text++;
+    if (validate && unlikely (c > 0x10FFFFu || hb_in_range (c, 0xD800u, 0xDFFFu)))
+      goto error;
+    *unicode = c;
+    return text;
 
-static inline unsigned int
-hb_utf_strlen (const uint32_t *text)
-{
-  unsigned int l = 0;
-  while (*text++) l++;
-  return l;
-}
+  error:
+    *unicode = replacement;
+    return text;
+  }
+
+  static inline const uint32_t *
+  prev (const uint32_t *text,
+	const uint32_t *start HB_UNUSED,
+	hb_codepoint_t *unicode,
+	hb_codepoint_t replacement)
+  {
+    next (text - 1, text, unicode, replacement);
+    return text - 1;
+  }
+
+  static inline unsigned int
+  strlen (const uint32_t *text)
+  {
+    unsigned int l = 0;
+    while (*text++) l++;
+    return l;
+  }
+};
 
 
 #endif /* HB_UTF_PRIVATE_HH */
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-version.h b/src/3rdparty/harfbuzz-ng/src/hb-version.h
index 790e0ecbae..517cc8f26e 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-version.h
+++ b/src/3rdparty/harfbuzz-ng/src/hb-version.h
@@ -38,12 +38,12 @@ HB_BEGIN_DECLS
 
 #define HB_VERSION_MAJOR 0
 #define HB_VERSION_MINOR 9
-#define HB_VERSION_MICRO 25
+#define HB_VERSION_MICRO 32
 
-#define HB_VERSION_STRING "0.9.25"
+#define HB_VERSION_STRING "0.9.32"
 
-#define HB_VERSION_CHECK(major,minor,micro) \
-	((major)*10000+(minor)*100+(micro) >= \
+#define HB_VERSION_ATLEAST(major,minor,micro) \
+	((major)*10000+(minor)*100+(micro) <= \
 	 HB_VERSION_MAJOR*10000+HB_VERSION_MINOR*100+HB_VERSION_MICRO)
 
 
@@ -56,9 +56,9 @@ const char *
 hb_version_string (void);
 
 hb_bool_t
-hb_version_check (unsigned int major,
-		  unsigned int minor,
-		  unsigned int micro);
+hb_version_atleast (unsigned int major,
+		    unsigned int minor,
+		    unsigned int micro);
 
 
 HB_END_DECLS
diff --git a/src/3rdparty/harfbuzz-ng/src/hb-warning.cc b/src/3rdparty/harfbuzz-ng/src/hb-warning.cc
index 4f1f65f5a2..e0f88e2d4a 100644
--- a/src/3rdparty/harfbuzz-ng/src/hb-warning.cc
+++ b/src/3rdparty/harfbuzz-ng/src/hb-warning.cc
@@ -53,14 +53,3 @@
 #endif
 
 
-#include "hb-unicode-private.hh"
-
-#if !defined(HB_NO_UNICODE_FUNCS) && defined(HB_UNICODE_FUNCS_NIL)
-#ifdef _MSC_VER
-#pragma message("Could not find any Unicode functions implementation, you have to provide your own")
-#pragma message("To suppress this warnings, define HB_NO_UNICODE_FUNCS")
-#else
-#warning "Could not find any Unicode functions implementation, you have to provide your own"
-#warning "To suppress this warning, define HB_NO_UNICODE_FUNCS"
-#endif
-#endif
diff --git a/src/3rdparty/pcre/AUTHORS b/src/3rdparty/pcre/AUTHORS
index 97d8c71dd6..5eee1af4c6 100644
--- a/src/3rdparty/pcre/AUTHORS
+++ b/src/3rdparty/pcre/AUTHORS
@@ -8,7 +8,7 @@ Email domain:     cam.ac.uk
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2013 University of Cambridge
+Copyright (c) 1997-2014 University of Cambridge
 All rights reserved
 
 
@@ -19,7 +19,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2013 Zoltan Herczeg
+Copyright(c) 2010-2014 Zoltan Herczeg
 All rights reserved.
 
 
@@ -30,7 +30,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2013 Zoltan Herczeg
+Copyright(c) 2009-2014 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/src/3rdparty/pcre/LICENCE b/src/3rdparty/pcre/LICENCE
index 3aff6a62c0..602e4ae680 100644
--- a/src/3rdparty/pcre/LICENCE
+++ b/src/3rdparty/pcre/LICENCE
@@ -24,7 +24,7 @@ Email domain:     cam.ac.uk
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2013 University of Cambridge
+Copyright (c) 1997-2014 University of Cambridge
 All rights reserved.
 
 
@@ -35,7 +35,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2013 Zoltan Herczeg
+Copyright(c) 2010-2014 Zoltan Herczeg
 All rights reserved.
 
 
@@ -46,7 +46,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2013 Zoltan Herczeg
+Copyright(c) 2009-2014 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/src/3rdparty/pcre/config.h b/src/3rdparty/pcre/config.h
index d45d88abd1..de3832a8e2 100644
--- a/src/3rdparty/pcre/config.h
+++ b/src/3rdparty/pcre/config.h
@@ -16,10 +16,11 @@
 
 /*
     man 3 pcrejit for a list of supported platforms;
-    as PCRE 8.30, stable JIT support is available for:
+    as PCRE 8.35, stable JIT support is available for:
     - ARM v5, v7, and Thumb2 (__GNUC__ compilers only)
     - x86/x86-64
     - MIPS 32bit (__GNUC__ compilers only)
+    - Power PC 32-bit and 64-bit (__GNUC__ compilers only)
 */
 #if !defined(PCRE_DISABLE_JIT) && (\
     /* ARM */ \
@@ -30,6 +31,11 @@
     /* MIPS32 */ \
     || (defined(__GNUC__) \
        && (defined(__mips) || defined(__mips__)) \
-       && !(defined(_MIPS_ARCH_MIPS64) || defined(__mips64))))
+       && !(defined(_MIPS_ARCH_MIPS64) || defined(__mips64))) \
+    || (defined(__GNUC__) \
+       && (defined(__ppc__) || defined(__ppc) || defined(__powerpc__) \
+          || defined(_ARCH_COM) || defined(_ARCH_PWR) || defined(_ARCH_PPC)  \
+          || defined(_M_MPPC) || defined(_M_PPC))) \
+    )
 #  define SUPPORT_JIT
 #endif
diff --git a/src/3rdparty/pcre/import_from_pcre_tarball.sh b/src/3rdparty/pcre/import_from_pcre_tarball.sh
index 5710e36a0f..ead4ac8c88 100755
--- a/src/3rdparty/pcre/import_from_pcre_tarball.sh
+++ b/src/3rdparty/pcre/import_from_pcre_tarball.sh
@@ -136,15 +136,19 @@ FILES="
     sljit/sljitExecAllocator.c
     sljit/sljitLir.c
     sljit/sljitLir.h
-    sljit/sljitNativeARM_Thumb2.c
-    sljit/sljitNativeARM_v5.c
+    sljit/sljitNativeARM_32.c
+    sljit/sljitNativeARM_64.c
+    sljit/sljitNativeARM_T2_32.c
     sljit/sljitNativeMIPS_32.c
+    sljit/sljitNativeMIPS_64.c
     sljit/sljitNativeMIPS_common.c
     sljit/sljitNativePPC_32.c
     sljit/sljitNativePPC_64.c
     sljit/sljitNativePPC_common.c
     sljit/sljitNativeSPARC_32.c
     sljit/sljitNativeSPARC_common.c
+    sljit/sljitNativeTILEGX_64.c
+    sljit/sljitNativeTILEGX-encoder.c
     sljit/sljitNativeX86_32.c
     sljit/sljitNativeX86_64.c
     sljit/sljitNativeX86_common.c
diff --git a/src/3rdparty/pcre/patches/bug_1423_jit_condition_misoptimization_fix.diff b/src/3rdparty/pcre/patches/bug_1423_jit_condition_misoptimization_fix.diff
deleted file mode 100644
index 4fd46d57a1..0000000000
--- a/src/3rdparty/pcre/patches/bug_1423_jit_condition_misoptimization_fix.diff
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: pcre_jit_compile.c
-===================================================================
---- pcre_jit_compile.c	(revision 1413)
-+++ pcre_jit_compile.c	(working copy)
-@@ -3546,7 +3546,9 @@
-       }
-     return TRUE;
-     }
--  if ((ranges[3] - ranges[2]) == (ranges[5] - ranges[4]) && is_powerof2(ranges[4] - ranges[2]))
-+  if ((ranges[3] - ranges[2]) == (ranges[5] - ranges[4])
-+      && (ranges[2] | (ranges[4] - ranges[2])) == ranges[4]
-+      && is_powerof2(ranges[4] - ranges[2]))
-     {
-     if (readch)
-       read_char(common);
diff --git a/src/3rdparty/pcre/pcre.h b/src/3rdparty/pcre/pcre.h
index c85f36b6bc..ce4251c8e6 100644
--- a/src/3rdparty/pcre/pcre.h
+++ b/src/3rdparty/pcre/pcre.h
@@ -5,7 +5,7 @@
 /* This is the public header file for the PCRE library, to be #included by
 applications that call the PCRE functions.
 
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -42,9 +42,9 @@ POSSIBILITY OF SUCH DAMAGE.
 /* The current PCRE version information. */
 
 #define PCRE_MAJOR          8
-#define PCRE_MINOR          34
+#define PCRE_MINOR          35
 #define PCRE_PRERELEASE     
-#define PCRE_DATE           2013-12-15
+#define PCRE_DATE           2014-04-04
 
 /* When an application links to a PCRE DLL in Windows, the symbols that are
 imported have to be identified as such. When building PCRE, the appropriate
@@ -491,36 +491,42 @@ PCRE_EXP_DECL void  (*pcre_free)(void *);
 PCRE_EXP_DECL void *(*pcre_stack_malloc)(size_t);
 PCRE_EXP_DECL void  (*pcre_stack_free)(void *);
 PCRE_EXP_DECL int   (*pcre_callout)(pcre_callout_block *);
+PCRE_EXP_DECL int   (*pcre_stack_guard)(void);
 
 PCRE_EXP_DECL void *(*pcre16_malloc)(size_t);
 PCRE_EXP_DECL void  (*pcre16_free)(void *);
 PCRE_EXP_DECL void *(*pcre16_stack_malloc)(size_t);
 PCRE_EXP_DECL void  (*pcre16_stack_free)(void *);
 PCRE_EXP_DECL int   (*pcre16_callout)(pcre16_callout_block *);
+PCRE_EXP_DECL int   (*pcre16_stack_guard)(void);
 
 PCRE_EXP_DECL void *(*pcre32_malloc)(size_t);
 PCRE_EXP_DECL void  (*pcre32_free)(void *);
 PCRE_EXP_DECL void *(*pcre32_stack_malloc)(size_t);
 PCRE_EXP_DECL void  (*pcre32_stack_free)(void *);
 PCRE_EXP_DECL int   (*pcre32_callout)(pcre32_callout_block *);
+PCRE_EXP_DECL int   (*pcre32_stack_guard)(void);
 #else   /* VPCOMPAT */
 PCRE_EXP_DECL void *pcre_malloc(size_t);
 PCRE_EXP_DECL void  pcre_free(void *);
 PCRE_EXP_DECL void *pcre_stack_malloc(size_t);
 PCRE_EXP_DECL void  pcre_stack_free(void *);
 PCRE_EXP_DECL int   pcre_callout(pcre_callout_block *);
+PCRE_EXP_DECL int   pcre_stack_guard(void);
 
 PCRE_EXP_DECL void *pcre16_malloc(size_t);
 PCRE_EXP_DECL void  pcre16_free(void *);
 PCRE_EXP_DECL void *pcre16_stack_malloc(size_t);
 PCRE_EXP_DECL void  pcre16_stack_free(void *);
 PCRE_EXP_DECL int   pcre16_callout(pcre16_callout_block *);
+PCRE_EXP_DECL int   pcre16_stack_guard(void);
 
 PCRE_EXP_DECL void *pcre32_malloc(size_t);
 PCRE_EXP_DECL void  pcre32_free(void *);
 PCRE_EXP_DECL void *pcre32_stack_malloc(size_t);
 PCRE_EXP_DECL void  pcre32_stack_free(void *);
 PCRE_EXP_DECL int   pcre32_callout(pcre32_callout_block *);
+PCRE_EXP_DECL int   pcre32_stack_guard(void);
 #endif  /* VPCOMPAT */
 
 /* User defined callback which provides a stack just before the match starts. */
diff --git a/src/3rdparty/pcre/pcre_byte_order.c b/src/3rdparty/pcre/pcre_byte_order.c
index 02b8050327..4ce674b0c0 100644
--- a/src/3rdparty/pcre/pcre_byte_order.c
+++ b/src/3rdparty/pcre/pcre_byte_order.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -311,9 +311,9 @@ while(TRUE)
   ptr++;
   }
 /* Control should never reach here in 16/32 bit mode. */
-#endif /* !COMPILE_PCRE8 */
-
+#else  /* In 8-bit mode, the pattern does not need to be processed. */
 return 0;
+#endif /* !COMPILE_PCRE8 */
 }
 
 /* End of pcre_byte_order.c */
diff --git a/src/3rdparty/pcre/pcre_compile.c b/src/3rdparty/pcre/pcre_compile.c
index ed1681e5dd..ce365e2915 100644
--- a/src/3rdparty/pcre/pcre_compile.c
+++ b/src/3rdparty/pcre/pcre_compile.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -547,6 +547,8 @@ static const char error_texts[] =
   "parentheses are too deeply nested\0"
   "invalid range in character class\0"
   "group name must start with a non-digit\0"
+  /* 85 */
+  "parentheses are too deeply nested (stack check)\0"
   ;
 
 /* Table to identify digits and hex digits. This is used when compiling
@@ -3067,8 +3069,11 @@ const pcre_uint32 *chr_ptr;
 const pcre_uint32 *ochr_ptr;
 const pcre_uint32 *list_ptr;
 const pcre_uchar *next_code;
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+const pcre_uchar *xclass_flags;
+#endif
 const pcre_uint8 *class_bitset;
-const pcre_uint32 *set1, *set2, *set_end;
+const pcre_uint8 *set1, *set2, *set_end;
 pcre_uint32 chr;
 BOOL accepted, invert_bits;
 
@@ -3199,12 +3204,12 @@ for(;;)
     if (base_list[0] == OP_CLASS)
 #endif
       {
-      set1 = (pcre_uint32 *)(base_end - base_list[2]);
+      set1 = (pcre_uint8 *)(base_end - base_list[2]);
       list_ptr = list;
       }
     else
       {
-      set1 = (pcre_uint32 *)(code - list[2]);
+      set1 = (pcre_uint8 *)(code - list[2]);
       list_ptr = base_list;
       }
 
@@ -3213,41 +3218,53 @@ for(;;)
       {
       case OP_CLASS:
       case OP_NCLASS:
-      set2 = (pcre_uint32 *)
+      set2 = (pcre_uint8 *)
         ((list_ptr == list ? code : base_end) - list_ptr[2]);
       break;
 
-      /* OP_XCLASS cannot be supported here, because its bitset
-      is not necessarily complete. E.g: [a-\0x{200}] is stored
-      as a character range, and the appropriate bits are not set. */
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+      case OP_XCLASS:
+      xclass_flags = (list_ptr == list ? code : base_end) - list_ptr[2] + LINK_SIZE;
+      if ((*xclass_flags & XCL_HASPROP) != 0) return FALSE;
+      if ((*xclass_flags & XCL_MAP) == 0)
+        {
+        /* No bits are set for characters < 256. */
+        if (list[1] == 0) return TRUE;
+        /* Might be an empty repeat. */
+        continue;
+        }
+      set2 = (pcre_uint8 *)(xclass_flags + 1);
+      break;
+#endif
 
       case OP_NOT_DIGIT:
-        invert_bits = TRUE;
-        /* Fall through */
+      invert_bits = TRUE;
+      /* Fall through */
       case OP_DIGIT:
-        set2 = (pcre_uint32 *)(cd->cbits + cbit_digit);
-        break;
+      set2 = (pcre_uint8 *)(cd->cbits + cbit_digit);
+      break;
 
       case OP_NOT_WHITESPACE:
-        invert_bits = TRUE;
-        /* Fall through */
+      invert_bits = TRUE;
+      /* Fall through */
       case OP_WHITESPACE:
-        set2 = (pcre_uint32 *)(cd->cbits + cbit_space);
-        break;
+      set2 = (pcre_uint8 *)(cd->cbits + cbit_space);
+      break;
 
       case OP_NOT_WORDCHAR:
-        invert_bits = TRUE;
-        /* Fall through */
+      invert_bits = TRUE;
+      /* Fall through */
       case OP_WORDCHAR:
-        set2 = (pcre_uint32 *)(cd->cbits + cbit_word);
-        break;
+      set2 = (pcre_uint8 *)(cd->cbits + cbit_word);
+      break;
 
       default:
       return FALSE;
       }
 
-    /* Compare 4 bytes to improve speed. */
-    set_end = set1 + (32 / 4);
+    /* Because the sets are unaligned, we need
+    to perform byte comparison here. */
+    set_end = set1 + 32;
     if (invert_bits)
       {
       do
@@ -3548,7 +3565,9 @@ for(;;)
   if (list[1] == 0) return TRUE;
   }
 
-return FALSE;
+/* Control never reaches here. There used to be a fail-save return FALSE; here,
+but some compilers complain about an unreachable statement. */
+
 }
 
 
@@ -3620,7 +3639,7 @@ for (;;)
         break;
 
         case OP_MINUPTO:
-        *code += OP_MINUPTO - OP_UPTO;
+        *code += OP_POSUPTO - OP_MINUPTO;
         break;
         }
       }
@@ -4059,12 +4078,16 @@ for (c = *cptr; c <= d; c++)
 
 if (c > d) return -1;  /* Reached end of range */
 
+/* Found a character that has a single other case. Search for the end of the
+range, which is either the end of the input range, or a character that has zero
+or more than one other cases. */
+
 *ocptr = othercase;
 next = othercase + 1;
 
 for (++c; c <= d; c++)
   {
-  if (UCD_OTHERCASE(c) != next) break;
+  if ((co = UCD_CASESET(c)) != 0 || UCD_OTHERCASE(c) != next) break;
   next++;
   }
 
@@ -4102,6 +4125,7 @@ add_to_class(pcre_uint8 *classbits, pcre_uchar **uchardptr, int options,
   compile_data *cd, pcre_uint32 start, pcre_uint32 end)
 {
 pcre_uint32 c;
+pcre_uint32 classbits_end = (end <= 0xff ? end : 0xff);
 int n8 = 0;
 
 /* If caseless matching is required, scan the range and process alternate
@@ -4145,7 +4169,7 @@ if ((options & PCRE_CASELESS) != 0)
 
   /* Not UTF-mode, or no UCP */
 
-  for (c = start; c <= end && c < 256; c++)
+  for (c = start; c <= classbits_end; c++)
     {
     SETBIT(classbits, cd->fcc[c]);
     n8++;
@@ -4170,22 +4194,21 @@ in all cases. */
 
 #endif /* COMPILE_PCRE[8|16] */
 
-/* If all characters are less than 256, use the bit map. Otherwise use extra
-data. */
+/* Use the bitmap for characters < 256. Otherwise use extra data.*/
 
-if (end < 0x100)
+for (c = start; c <= classbits_end; c++)
   {
-  for (c = start; c <= end; c++)
-    {
-    n8++;
-    SETBIT(classbits, c);
-    }
+  /* Regardless of start, c will always be <= 255. */
+  SETBIT(classbits, c);
+  n8++;
   }
 
-else
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+if (start <= 0xff) start = 0xff + 1;
+
+if (end >= start)
   {
   pcre_uchar *uchardata = *uchardptr;
-
 #ifdef SUPPORT_UTF
   if ((options & PCRE_UTF8) != 0)  /* All UTFs use the same flag bit */
     {
@@ -4225,6 +4248,7 @@ else
 
   *uchardptr = uchardata;   /* Updata extra data pointer */
   }
+#endif /* SUPPORT_UTF || !COMPILE_PCRE8 */
 
 return n8;    /* Number of 8-bit characters */
 }
@@ -4446,6 +4470,9 @@ for (;; ptr++)
   BOOL reset_bracount;
   int class_has_8bitchar;
   int class_one_char;
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+  BOOL xclass_has_prop;
+#endif
   int newoptions;
   int recno;
   int refsign;
@@ -4780,13 +4807,26 @@ for (;; ptr++)
 
     should_flip_negation = FALSE;
 
+    /* Extended class (xclass) will be used when characters > 255
+    might match. */
+
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+    xclass = FALSE;
+    class_uchardata = code + LINK_SIZE + 2;   /* For XCLASS items */
+    class_uchardata_base = class_uchardata;   /* Save the start */
+#endif
+
     /* For optimization purposes, we track some properties of the class:
     class_has_8bitchar will be non-zero if the class contains at least one <
     256 character; class_one_char will be 1 if the class contains just one
-    character. */
+    character; xclass_has_prop will be TRUE if unicode property checks
+    are present in the class. */
 
     class_has_8bitchar = 0;
     class_one_char = 0;
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+    xclass_has_prop = FALSE;
+#endif
 
     /* Initialize the 32-char bit map to all zeros. We build the map in a
     temporary bit of memory, in case the class contains fewer than two
@@ -4795,12 +4835,6 @@ for (;; ptr++)
 
     memset(classbits, 0, 32 * sizeof(pcre_uint8));
 
-#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
-    xclass = FALSE;
-    class_uchardata = code + LINK_SIZE + 2;   /* For XCLASS items */
-    class_uchardata_base = class_uchardata;   /* Save the start */
-#endif
-
     /* Process characters until ] is reached. By writing this as a "do" it
     means that an initial ] is taken as a data character. At the start of the
     loop, c contains the first byte of the character. */
@@ -4924,6 +4958,7 @@ for (;; ptr++)
             *class_uchardata++ = local_negate? XCL_NOTPROP : XCL_PROP;
             *class_uchardata++ = ptype;
             *class_uchardata++ = 0;
+            xclass_has_prop = TRUE;
             ptr = tempptr + 1;
             continue;
 
@@ -5106,6 +5141,7 @@ for (;; ptr++)
                 XCL_PROP : XCL_NOTPROP;
               *class_uchardata++ = ptype;
               *class_uchardata++ = pdata;
+              xclass_has_prop = TRUE;
               class_has_8bitchar--;                /* Undo! */
               continue;
               }
@@ -5400,6 +5436,7 @@ for (;; ptr++)
       *code++ = OP_XCLASS;
       code += LINK_SIZE;
       *code = negate_class? XCL_NOT:0;
+      if (xclass_has_prop) *code |= XCL_HASPROP;
 
       /* If the map is required, move up the extra data to make room for it;
       otherwise just move the code pointer to the end of the extra data. */
@@ -5409,6 +5446,8 @@ for (;; ptr++)
         *code++ |= XCL_MAP;
         memmove(code + (32 / sizeof(pcre_uchar)), code,
           IN_UCHARS(class_uchardata - code));
+        if (negate_class && !xclass_has_prop)
+          for (c = 0; c < 32; c++) classbits[c] = ~classbits[c];
         memcpy(code, classbits, 32);
         code = class_uchardata + (32 / sizeof(pcre_uchar));
         }
@@ -6577,7 +6616,10 @@ for (;; ptr++)
 
         code[1+LINK_SIZE] = OP_CREF;
         skipbytes = 1+IMM2_SIZE;
-        refsign = -1;
+        refsign = -1;     /* => not a number */
+        namelen = -1;     /* => not a name; must set to avoid warning */
+        name = NULL;      /* Always set to avoid warning */
+        recno = 0;        /* Always set to avoid warning */
 
         /* Check for a test for recursion in a named group. */
 
@@ -6614,7 +6656,6 @@ for (;; ptr++)
 
         if (refsign >= 0)
           {
-          recno = 0;
           while (IS_DIGIT(*ptr))
             {
             recno = recno * 10 + (int)(*ptr - CHAR_0);
@@ -7991,6 +8032,16 @@ unsigned int orig_bracount;
 unsigned int max_bracount;
 branch_chain bc;
 
+/* If set, call the external function that checks for stack availability. */
+
+if (PUBL(stack_guard) != NULL && PUBL(stack_guard)())
+  {
+  *errorcodeptr= ERR85;
+  return FALSE;
+  }
+
+/* Miscellaneous initialization */
+
 bc.outer = bcptr;
 bc.current_branch = code;
 
diff --git a/src/3rdparty/pcre/pcre_dfa_exec.c b/src/3rdparty/pcre/pcre_dfa_exec.c
index 243309789e..886df525cc 100644
--- a/src/3rdparty/pcre/pcre_dfa_exec.c
+++ b/src/3rdparty/pcre/pcre_dfa_exec.c
@@ -7,7 +7,7 @@ and semantics are as close as possible to those of the Perl 5 language (but see
 below for why this module is different).
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -1473,7 +1473,7 @@ for (;;)
           goto ANYNL01;
 
           case CHAR_CR:
-          if (ptr + 1 < end_subject && RAWUCHARTEST(ptr + 1) == CHAR_LF) ncount = 1;
+          if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1;
           /* Fall through */
 
           ANYNL01:
@@ -1742,7 +1742,7 @@ for (;;)
           goto ANYNL02;
 
           case CHAR_CR:
-          if (ptr + 1 < end_subject && RAWUCHARTEST(ptr + 1) == CHAR_LF) ncount = 1;
+          if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1;
           /* Fall through */
 
           ANYNL02:
@@ -2012,7 +2012,7 @@ for (;;)
           goto ANYNL03;
 
           case CHAR_CR:
-          if (ptr + 1 < end_subject && RAWUCHARTEST(ptr + 1) == CHAR_LF) ncount = 1;
+          if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1;
           /* Fall through */
 
           ANYNL03:
@@ -2210,7 +2210,7 @@ for (;;)
           if ((md->moptions & PCRE_PARTIAL_HARD) != 0)
             reset_could_continue = TRUE;
           }
-        else if (RAWUCHARTEST(ptr + 1) == CHAR_LF)
+        else if (UCHAR21TEST(ptr + 1) == CHAR_LF)
           {
           ADD_NEW_DATA(-(state_offset + 1), 0, 1);
           }
@@ -3466,7 +3466,7 @@ for (;;)
 
     if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0)
       {
-      /* Advance to a known first char. */
+      /* Advance to a known first pcre_uchar (i.e. data item) */
 
       if (has_first_char)
         {
@@ -3474,12 +3474,12 @@ for (;;)
           {
           pcre_uchar csc;
           while (current_subject < end_subject &&
-                 (csc = RAWUCHARTEST(current_subject)) != first_char && csc != first_char2)
+                 (csc = UCHAR21TEST(current_subject)) != first_char && csc != first_char2)
             current_subject++;
           }
         else
           while (current_subject < end_subject &&
-                 RAWUCHARTEST(current_subject) != first_char)
+                 UCHAR21TEST(current_subject) != first_char)
             current_subject++;
         }
 
@@ -3509,36 +3509,26 @@ for (;;)
           ANYCRLF, and we are now at a LF, advance the match position by one
           more character. */
 
-          if (RAWUCHARTEST(current_subject - 1) == CHAR_CR &&
+          if (UCHAR21TEST(current_subject - 1) == CHAR_CR &&
                (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) &&
                current_subject < end_subject &&
-               RAWUCHARTEST(current_subject) == CHAR_NL)
+               UCHAR21TEST(current_subject) == CHAR_NL)
             current_subject++;
           }
         }
 
-      /* Or to a non-unique first char after study */
+      /* Advance to a non-unique first pcre_uchar after study */
 
       else if (start_bits != NULL)
         {
         while (current_subject < end_subject)
           {
-          register pcre_uint32 c = RAWUCHARTEST(current_subject);
+          register pcre_uint32 c = UCHAR21TEST(current_subject);
 #ifndef COMPILE_PCRE8
           if (c > 255) c = 255;
 #endif
-          if ((start_bits[c/8] & (1 << (c&7))) == 0)
-            {
-            current_subject++;
-#if defined SUPPORT_UTF && defined COMPILE_PCRE8
-            /* In non 8-bit mode, the iteration will stop for
-            characters > 255 at the beginning or not stop at all. */
-            if (utf)
-              ACROSSCHAR(current_subject < end_subject, *current_subject,
-                current_subject++);
-#endif
-            }
-          else break;
+          if ((start_bits[c/8] & (1 << (c&7))) != 0) break;
+          current_subject++;
           }
         }
       }
@@ -3557,19 +3547,20 @@ for (;;)
       /* If the pattern was studied, a minimum subject length may be set. This
       is a lower bound; no actual string of that length may actually match the
       pattern. Although the value is, strictly, in characters, we treat it as
-      bytes to avoid spending too much time in this optimization. */
+      in pcre_uchar units to avoid spending too much time in this optimization.
+      */
 
       if (study != NULL && (study->flags & PCRE_STUDY_MINLEN) != 0 &&
           (pcre_uint32)(end_subject - current_subject) < study->minlength)
         return PCRE_ERROR_NOMATCH;
 
-      /* If req_char is set, we know that that character must appear in the
-      subject for the match to succeed. If the first character is set, req_char
-      must be later in the subject; otherwise the test starts at the match
-      point. This optimization can save a huge amount of work in patterns with
-      nested unlimited repeats that aren't going to match. Writing separate
-      code for cased/caseless versions makes it go faster, as does using an
-      autoincrement and backing off on a match.
+      /* If req_char is set, we know that that pcre_uchar must appear in the
+      subject for the match to succeed. If the first pcre_uchar is set,
+      req_char must be later in the subject; otherwise the test starts at the
+      match point. This optimization can save a huge amount of work in patterns
+      with nested unlimited repeats that aren't going to match. Writing
+      separate code for cased/caseless versions makes it go faster, as does
+      using an autoincrement and backing off on a match.
 
       HOWEVER: when the subject string is very, very long, searching to its end
       can take a long time, and give bad performance on quite ordinary
@@ -3589,7 +3580,7 @@ for (;;)
             {
             while (p < end_subject)
               {
-              register pcre_uint32 pp = RAWUCHARINCTEST(p);
+              register pcre_uint32 pp = UCHAR21INCTEST(p);
               if (pp == req_char || pp == req_char2) { p--; break; }
               }
             }
@@ -3597,18 +3588,18 @@ for (;;)
             {
             while (p < end_subject)
               {
-              if (RAWUCHARINCTEST(p) == req_char) { p--; break; }
+              if (UCHAR21INCTEST(p) == req_char) { p--; break; }
               }
             }
 
-          /* If we can't find the required character, break the matching loop,
+          /* If we can't find the required pcre_uchar, break the matching loop,
           which will cause a return or PCRE_ERROR_NOMATCH. */
 
           if (p >= end_subject) break;
 
-          /* If we have found the required character, save the point where we
+          /* If we have found the required pcre_uchar, save the point where we
           found it, so that we don't search again next time round the loop if
-          the start hasn't passed this character yet. */
+          the start hasn't passed this point yet. */
 
           req_char_ptr = p;
           }
@@ -3665,9 +3656,9 @@ for (;;)
   not contain any explicit matches for \r or \n, and the newline option is CRLF
   or ANY or ANYCRLF, advance the match position by one more character. */
 
-  if (RAWUCHARTEST(current_subject - 1) == CHAR_CR &&
+  if (UCHAR21TEST(current_subject - 1) == CHAR_CR &&
       current_subject < end_subject &&
-      RAWUCHARTEST(current_subject) == CHAR_NL &&
+      UCHAR21TEST(current_subject) == CHAR_NL &&
       (re->flags & PCRE_HASCRORLF) == 0 &&
         (md->nltype == NLTYPE_ANY ||
          md->nltype == NLTYPE_ANYCRLF ||
diff --git a/src/3rdparty/pcre/pcre_exec.c b/src/3rdparty/pcre/pcre_exec.c
index 913521ff0c..b0101da351 100644
--- a/src/3rdparty/pcre/pcre_exec.c
+++ b/src/3rdparty/pcre/pcre_exec.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -134,7 +134,7 @@ pcre_uint32 c;
 BOOL utf = md->utf;
 if (is_subject && length > md->end_subject - p) length = md->end_subject - p;
 while (length-- > 0)
-  if (isprint(c = RAWUCHARINCTEST(p))) printf("%c", (char)c); else printf("\\x{%02x}", c);
+  if (isprint(c = UCHAR21INCTEST(p))) printf("%c", (char)c); else printf("\\x{%02x}", c);
 }
 #endif
 
@@ -237,8 +237,8 @@ if (caseless)
       {
       pcre_uint32 cc, cp;
       if (eptr >= md->end_subject) return -2;   /* Partial match */
-      cc = RAWUCHARTEST(eptr);
-      cp = RAWUCHARTEST(p);
+      cc = UCHAR21TEST(eptr);
+      cp = UCHAR21TEST(p);
       if (TABLE_GET(cp, md->lcc, cp) != TABLE_GET(cc, md->lcc, cc)) return -1;
       p++;
       eptr++;
@@ -254,7 +254,7 @@ else
   while (length-- > 0)
     {
     if (eptr >= md->end_subject) return -2;   /* Partial match */
-    if (RAWUCHARINCTEST(p) != RAWUCHARINCTEST(eptr)) return -1;
+    if (UCHAR21INCTEST(p) != UCHAR21INCTEST(eptr)) return -1;
     }
   }
 
@@ -2103,7 +2103,7 @@ for (;;)
             eptr + 1 >= md->end_subject &&
             NLBLOCK->nltype == NLTYPE_FIXED &&
             NLBLOCK->nllen == 2 &&
-            RAWUCHARTEST(eptr) == NLBLOCK->nl[0])
+            UCHAR21TEST(eptr) == NLBLOCK->nl[0])
           {
           md->hitend = TRUE;
           if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);
@@ -2147,7 +2147,7 @@ for (;;)
           eptr + 1 >= md->end_subject &&
           NLBLOCK->nltype == NLTYPE_FIXED &&
           NLBLOCK->nllen == 2 &&
-          RAWUCHARTEST(eptr) == NLBLOCK->nl[0])
+          UCHAR21TEST(eptr) == NLBLOCK->nl[0])
         {
         md->hitend = TRUE;
         if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);
@@ -2290,7 +2290,7 @@ for (;;)
         eptr + 1 >= md->end_subject &&
         NLBLOCK->nltype == NLTYPE_FIXED &&
         NLBLOCK->nllen == 2 &&
-        RAWUCHARTEST(eptr) == NLBLOCK->nl[0])
+        UCHAR21TEST(eptr) == NLBLOCK->nl[0])
       {
       md->hitend = TRUE;
       if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);
@@ -2444,7 +2444,7 @@ for (;;)
         {
         SCHECK_PARTIAL();
         }
-      else if (RAWUCHARTEST(eptr) == CHAR_LF) eptr++;
+      else if (UCHAR21TEST(eptr) == CHAR_LF) eptr++;
       break;
 
       case CHAR_LF:
@@ -2691,16 +2691,22 @@ for (;;)
       pcre_uchar *slot = md->name_table + GET2(ecode, 1) * md->name_entry_size;
       ecode += 1 + 2*IMM2_SIZE;
 
+      /* Setting the default length first and initializing 'offset' avoids
+      compiler warnings in the REF_REPEAT code. */
+
+      length = (md->jscript_compat)? 0 : -1;
+      offset = 0;
+
       while (count-- > 0)
         {
         offset = GET2(slot, 0) << 1;
-        if (offset < offset_top && md->offset_vector[offset] >= 0) break;
+        if (offset < offset_top && md->offset_vector[offset] >= 0)
+          {
+          length = md->offset_vector[offset+1] - md->offset_vector[offset];
+          break;
+          }
         slot += md->name_entry_size;
         }
-      if (count < 0)
-        length = (md->jscript_compat)? 0 : -1;
-      else
-        length = md->offset_vector[offset+1] - md->offset_vector[offset];
       }
     goto REF_REPEAT;
 
@@ -3212,7 +3218,7 @@ for (;;)
         CHECK_PARTIAL();             /* Not SCHECK_PARTIAL() */
         RRETURN(MATCH_NOMATCH);
         }
-      while (length-- > 0) if (*ecode++ != RAWUCHARINC(eptr)) RRETURN(MATCH_NOMATCH);
+      while (length-- > 0) if (*ecode++ != UCHAR21INC(eptr)) RRETURN(MATCH_NOMATCH);
       }
     else
 #endif
@@ -3252,7 +3258,7 @@ for (;;)
 
       if (fc < 128)
         {
-        pcre_uint32 cc = RAWUCHAR(eptr);
+        pcre_uint32 cc = UCHAR21(eptr);
         if (md->lcc[fc] != TABLE_GET(cc, md->lcc, cc)) RRETURN(MATCH_NOMATCH);
         ecode++;
         eptr++;
@@ -3521,7 +3527,7 @@ for (;;)
           SCHECK_PARTIAL();
           RRETURN(MATCH_NOMATCH);
           }
-        cc = RAWUCHARTEST(eptr);
+        cc = UCHAR21TEST(eptr);
         if (fc != cc && foc != cc) RRETURN(MATCH_NOMATCH);
         eptr++;
         }
@@ -3539,7 +3545,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          cc = RAWUCHARTEST(eptr);
+          cc = UCHAR21TEST(eptr);
           if (fc != cc && foc != cc) RRETURN(MATCH_NOMATCH);
           eptr++;
           }
@@ -3556,7 +3562,7 @@ for (;;)
             SCHECK_PARTIAL();
             break;
             }
-          cc = RAWUCHARTEST(eptr);
+          cc = UCHAR21TEST(eptr);
           if (fc != cc && foc != cc) break;
           eptr++;
           }
@@ -3583,7 +3589,7 @@ for (;;)
           SCHECK_PARTIAL();
           RRETURN(MATCH_NOMATCH);
           }
-        if (fc != RAWUCHARINCTEST(eptr)) RRETURN(MATCH_NOMATCH);
+        if (fc != UCHAR21INCTEST(eptr)) RRETURN(MATCH_NOMATCH);
         }
 
       if (min == max) continue;
@@ -3600,7 +3606,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          if (fc != RAWUCHARINCTEST(eptr)) RRETURN(MATCH_NOMATCH);
+          if (fc != UCHAR21INCTEST(eptr)) RRETURN(MATCH_NOMATCH);
           }
         /* Control never gets here */
         }
@@ -3614,7 +3620,7 @@ for (;;)
             SCHECK_PARTIAL();
             break;
             }
-          if (fc != RAWUCHARTEST(eptr)) break;
+          if (fc != UCHAR21TEST(eptr)) break;
           eptr++;
           }
         if (possessive) continue;    /* No backtracking */
@@ -4369,7 +4375,7 @@ for (;;)
               eptr + 1 >= md->end_subject &&
               NLBLOCK->nltype == NLTYPE_FIXED &&
               NLBLOCK->nllen == 2 &&
-              RAWUCHAR(eptr) == NLBLOCK->nl[0])
+              UCHAR21(eptr) == NLBLOCK->nl[0])
             {
             md->hitend = TRUE;
             if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);
@@ -4411,7 +4417,7 @@ for (;;)
             default: RRETURN(MATCH_NOMATCH);
 
             case CHAR_CR:
-            if (eptr < md->end_subject && RAWUCHAR(eptr) == CHAR_LF) eptr++;
+            if (eptr < md->end_subject && UCHAR21(eptr) == CHAR_LF) eptr++;
             break;
 
             case CHAR_LF:
@@ -4521,7 +4527,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          cc = RAWUCHAR(eptr);
+          cc = UCHAR21(eptr);
           if (cc >= 128 || (md->ctypes[cc] & ctype_digit) == 0)
             RRETURN(MATCH_NOMATCH);
           eptr++;
@@ -4538,7 +4544,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          cc = RAWUCHAR(eptr);
+          cc = UCHAR21(eptr);
           if (cc < 128 && (md->ctypes[cc] & ctype_space) != 0)
             RRETURN(MATCH_NOMATCH);
           eptr++;
@@ -4555,7 +4561,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          cc = RAWUCHAR(eptr);
+          cc = UCHAR21(eptr);
           if (cc >= 128 || (md->ctypes[cc] & ctype_space) == 0)
             RRETURN(MATCH_NOMATCH);
           eptr++;
@@ -4572,7 +4578,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          cc = RAWUCHAR(eptr);
+          cc = UCHAR21(eptr);
           if (cc < 128 && (md->ctypes[cc] & ctype_word) != 0)
             RRETURN(MATCH_NOMATCH);
           eptr++;
@@ -4589,7 +4595,7 @@ for (;;)
             SCHECK_PARTIAL();
             RRETURN(MATCH_NOMATCH);
             }
-          cc = RAWUCHAR(eptr);
+          cc = UCHAR21(eptr);
           if (cc >= 128 || (md->ctypes[cc] & ctype_word) == 0)
             RRETURN(MATCH_NOMATCH);
           eptr++;
@@ -5150,7 +5156,7 @@ for (;;)
               {
               default: RRETURN(MATCH_NOMATCH);
               case CHAR_CR:
-              if (eptr < md->end_subject && RAWUCHAR(eptr) == CHAR_LF) eptr++;
+              if (eptr < md->end_subject && UCHAR21(eptr) == CHAR_LF) eptr++;
               break;
 
               case CHAR_LF:
@@ -5689,7 +5695,7 @@ for (;;)
                   eptr + 1 >= md->end_subject &&
                   NLBLOCK->nltype == NLTYPE_FIXED &&
                   NLBLOCK->nllen == 2 &&
-                  RAWUCHAR(eptr) == NLBLOCK->nl[0])
+                  UCHAR21(eptr) == NLBLOCK->nl[0])
                 {
                 md->hitend = TRUE;
                 if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);
@@ -5715,7 +5721,7 @@ for (;;)
                   eptr + 1 >= md->end_subject &&
                   NLBLOCK->nltype == NLTYPE_FIXED &&
                   NLBLOCK->nllen == 2 &&
-                  RAWUCHAR(eptr) == NLBLOCK->nl[0])
+                  UCHAR21(eptr) == NLBLOCK->nl[0])
                 {
                 md->hitend = TRUE;
                 if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);
@@ -5772,7 +5778,7 @@ for (;;)
             if (c == CHAR_CR)
               {
               if (++eptr >= md->end_subject) break;
-              if (RAWUCHAR(eptr) == CHAR_LF) eptr++;
+              if (UCHAR21(eptr) == CHAR_LF) eptr++;
               }
             else
               {
@@ -5935,8 +5941,8 @@ for (;;)
           if (rrc != MATCH_NOMATCH) RRETURN(rrc);
           eptr--;
           BACKCHAR(eptr);
-          if (ctype == OP_ANYNL && eptr > pp  && RAWUCHAR(eptr) == CHAR_NL &&
-              RAWUCHAR(eptr - 1) == CHAR_CR) eptr--;
+          if (ctype == OP_ANYNL && eptr > pp  && UCHAR21(eptr) == CHAR_NL &&
+              UCHAR21(eptr - 1) == CHAR_CR) eptr--;
           }
         }
       else
@@ -6783,10 +6789,10 @@ for(;;)
 
       if (first_char != first_char2)
         while (start_match < end_subject &&
-          (smc = RAWUCHARTEST(start_match)) != first_char && smc != first_char2)
+          (smc = UCHAR21TEST(start_match)) != first_char && smc != first_char2)
           start_match++;
       else
-        while (start_match < end_subject && RAWUCHARTEST(start_match) != first_char)
+        while (start_match < end_subject && UCHAR21TEST(start_match) != first_char)
           start_match++;
       }
 
@@ -6818,7 +6824,7 @@ for(;;)
         if (start_match[-1] == CHAR_CR &&
              (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) &&
              start_match < end_subject &&
-             RAWUCHARTEST(start_match) == CHAR_NL)
+             UCHAR21TEST(start_match) == CHAR_NL)
           start_match++;
         }
       }
@@ -6829,22 +6835,12 @@ for(;;)
       {
       while (start_match < end_subject)
         {
-        register pcre_uint32 c = RAWUCHARTEST(start_match);
+        register pcre_uint32 c = UCHAR21TEST(start_match);
 #ifndef COMPILE_PCRE8
         if (c > 255) c = 255;
 #endif
-        if ((start_bits[c/8] & (1 << (c&7))) == 0)
-          {
-          start_match++;
-#if defined SUPPORT_UTF && defined COMPILE_PCRE8
-          /* In non 8-bit mode, the iteration will stop for
-          characters > 255 at the beginning or not stop at all. */
-          if (utf)
-            ACROSSCHAR(start_match < end_subject, *start_match,
-              start_match++);
-#endif
-          }
-        else break;
+        if ((start_bits[c/8] & (1 << (c&7))) != 0) break;
+        start_match++;
         }
       }
     }   /* Starting optimizations */
@@ -6897,7 +6893,7 @@ for(;;)
           {
           while (p < end_subject)
             {
-            register pcre_uint32 pp = RAWUCHARINCTEST(p);
+            register pcre_uint32 pp = UCHAR21INCTEST(p);
             if (pp == req_char || pp == req_char2) { p--; break; }
             }
           }
@@ -6905,7 +6901,7 @@ for(;;)
           {
           while (p < end_subject)
             {
-            if (RAWUCHARINCTEST(p) == req_char) { p--; break; }
+            if (UCHAR21INCTEST(p) == req_char) { p--; break; }
             }
           }
 
diff --git a/src/3rdparty/pcre/pcre_globals.c b/src/3rdparty/pcre/pcre_globals.c
index d5b6286fc2..8e02bbc728 100644
--- a/src/3rdparty/pcre/pcre_globals.c
+++ b/src/3rdparty/pcre/pcre_globals.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2012 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -72,6 +72,7 @@ PCRE_EXP_DATA_DEFN void  (*PUBL(free))(void *) = LocalPcreFree;
 PCRE_EXP_DATA_DEFN void *(*PUBL(stack_malloc))(size_t) = LocalPcreMalloc;
 PCRE_EXP_DATA_DEFN void  (*PUBL(stack_free))(void *) = LocalPcreFree;
 PCRE_EXP_DATA_DEFN int   (*PUBL(callout))(PUBL(callout_block) *) = NULL;
+PCRE_EXP_DATA_DEFN int   (*PUBL(stack_guard))(void) = NULL;
 
 #elif !defined VPCOMPAT
 PCRE_EXP_DATA_DEFN void *(*PUBL(malloc))(size_t) = malloc;
@@ -79,6 +80,7 @@ PCRE_EXP_DATA_DEFN void  (*PUBL(free))(void *) = free;
 PCRE_EXP_DATA_DEFN void *(*PUBL(stack_malloc))(size_t) = malloc;
 PCRE_EXP_DATA_DEFN void  (*PUBL(stack_free))(void *) = free;
 PCRE_EXP_DATA_DEFN int   (*PUBL(callout))(PUBL(callout_block) *) = NULL;
+PCRE_EXP_DATA_DEFN int   (*PUBL(stack_guard))(void) = NULL;
 #endif
 
 /* End of pcre_globals.c */
diff --git a/src/3rdparty/pcre/pcre_internal.h b/src/3rdparty/pcre/pcre_internal.h
index 0b9798c554..6e915a0e45 100644
--- a/src/3rdparty/pcre/pcre_internal.h
+++ b/src/3rdparty/pcre/pcre_internal.h
@@ -7,7 +7,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -316,8 +316,8 @@ start/end of string field names are. */
        &(NLBLOCK->nllen), utf)) \
     : \
     ((p) <= NLBLOCK->PSEND - NLBLOCK->nllen && \
-     RAWUCHARTEST(p) == NLBLOCK->nl[0] && \
-     (NLBLOCK->nllen == 1 || RAWUCHARTEST(p+1) == NLBLOCK->nl[1])       \
+     UCHAR21TEST(p) == NLBLOCK->nl[0] && \
+     (NLBLOCK->nllen == 1 || UCHAR21TEST(p+1) == NLBLOCK->nl[1])       \
     ) \
   )
 
@@ -330,8 +330,8 @@ start/end of string field names are. */
        &(NLBLOCK->nllen), utf)) \
     : \
     ((p) >= NLBLOCK->PSSTART + NLBLOCK->nllen && \
-     RAWUCHARTEST(p - NLBLOCK->nllen) == NLBLOCK->nl[0] &&              \
-     (NLBLOCK->nllen == 1 || RAWUCHARTEST(p - NLBLOCK->nllen + 1) == NLBLOCK->nl[1]) \
+     UCHAR21TEST(p - NLBLOCK->nllen) == NLBLOCK->nl[0] &&              \
+     (NLBLOCK->nllen == 1 || UCHAR21TEST(p - NLBLOCK->nllen + 1) == NLBLOCK->nl[1]) \
     ) \
   )
 
@@ -582,12 +582,27 @@ changed in future to be a fixed number of bytes or to depend on LINK_SIZE. */
 #define MAX_MARK ((1u << 8) - 1)
 #endif
 
+/* There is a proposed future special "UTF-21" mode, in which only the lowest
+21 bits of a 32-bit character are interpreted as UTF, with the remaining 11
+high-order bits available to the application for other uses. In preparation for
+the future implementation of this mode, there are macros that load a data item
+and, if in this special mode, mask it to 21 bits. These macros all have names
+starting with UCHAR21. In all other modes, including the normal 32-bit
+library, the macros all have the same simple definitions. When the new mode is
+implemented, it is expected that these definitions will be varied appropriately
+using #ifdef when compiling the library that supports the special mode. */
+
+#define UCHAR21(eptr)        (*(eptr))
+#define UCHAR21TEST(eptr)    (*(eptr))
+#define UCHAR21INC(eptr)     (*(eptr)++)
+#define UCHAR21INCTEST(eptr) (*(eptr)++)
+
 /* When UTF encoding is being used, a character is no longer just a single
-byte. The macros for character handling generate simple sequences when used in
-character-mode, and more complicated ones for UTF characters. GETCHARLENTEST
-and other macros are not used when UTF is not supported, so they are not
-defined. To make sure they can never even appear when UTF support is omitted,
-we don't even define them. */
+byte in 8-bit mode or a single short in 16-bit mode. The macros for character
+handling generate simple sequences when used in the basic mode, and more
+complicated ones for UTF characters. GETCHARLENTEST and other macros are not
+used when UTF is not supported. To make sure they can never even appear when
+UTF support is omitted, we don't even define them. */
 
 #ifndef SUPPORT_UTF
 
@@ -600,10 +615,6 @@ we don't even define them. */
 #define GETCHARINC(c, eptr) c = *eptr++;
 #define GETCHARINCTEST(c, eptr) c = *eptr++;
 #define GETCHARLEN(c, eptr, len) c = *eptr;
-#define RAWUCHAR(eptr) (*(eptr))
-#define RAWUCHARINC(eptr) (*(eptr)++)
-#define RAWUCHARTEST(eptr) (*(eptr))
-#define RAWUCHARINCTEST(eptr) (*(eptr)++)
 /* #define GETCHARLENTEST(c, eptr, len) */
 /* #define BACKCHAR(eptr) */
 /* #define FORWARDCHAR(eptr) */
@@ -776,30 +787,6 @@ do not know if we are in UTF-8 mode. */
   c = *eptr; \
   if (utf && c >= 0xc0) GETUTF8LEN(c, eptr, len);
 
-/* Returns the next uchar, not advancing the pointer. This is called when
-we know we are in UTF mode. */
-
-#define RAWUCHAR(eptr) \
-  (*(eptr))
-
-/* Returns the next uchar, advancing the pointer. This is called when
-we know we are in UTF mode. */
-
-#define RAWUCHARINC(eptr) \
-  (*((eptr)++))
-
-/* Returns the next uchar, testing for UTF mode, and not advancing the
-pointer. */
-
-#define RAWUCHARTEST(eptr) \
-  (*(eptr))
-
-/* Returns the next uchar, testing for UTF mode, advancing the
-pointer. */
-
-#define RAWUCHARINCTEST(eptr) \
-  (*((eptr)++))
-
 /* If the pointer is not at the start of a character, move it back until
 it is. This is called only in UTF-8 mode - we don't put a test within the macro
 because almost all calls are already within a block of UTF-8 only code. */
@@ -895,30 +882,6 @@ we do not know if we are in UTF-16 mode. */
   c = *eptr; \
   if (utf && (c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len);
 
-/* Returns the next uchar, not advancing the pointer. This is called when
-we know we are in UTF mode. */
-
-#define RAWUCHAR(eptr) \
-  (*(eptr))
-
-/* Returns the next uchar, advancing the pointer. This is called when
-we know we are in UTF mode. */
-
-#define RAWUCHARINC(eptr) \
-  (*((eptr)++))
-
-/* Returns the next uchar, testing for UTF mode, and not advancing the
-pointer. */
-
-#define RAWUCHARTEST(eptr) \
-  (*(eptr))
-
-/* Returns the next uchar, testing for UTF mode, advancing the
-pointer. */
-
-#define RAWUCHARINCTEST(eptr) \
-  (*((eptr)++))
-
 /* If the pointer is not at the start of a character, move it back until
 it is. This is called only in UTF-16 mode - we don't put a test within the
 macro because almost all calls are already within a block of UTF-16 only
@@ -980,30 +943,6 @@ This is called when we do not know if we are in UTF-32 mode. */
 #define GETCHARLENTEST(c, eptr, len) \
   GETCHARTEST(c, eptr)
 
-/* Returns the next uchar, not advancing the pointer. This is called when
-we know we are in UTF mode. */
-
-#define RAWUCHAR(eptr) \
-  (*(eptr))
-
-/* Returns the next uchar, advancing the pointer. This is called when
-we know we are in UTF mode. */
-
-#define RAWUCHARINC(eptr) \
-  (*((eptr)++))
-
-/* Returns the next uchar, testing for UTF mode, and not advancing the
-pointer. */
-
-#define RAWUCHARTEST(eptr) \
-  (*(eptr))
-
-/* Returns the next uchar, testing for UTF mode, advancing the
-pointer. */
-
-#define RAWUCHARINCTEST(eptr) \
-  (*((eptr)++))
-
 /* If the pointer is not at the start of a character, move it back until
 it is. This is called only in UTF-32 mode - we don't put a test within the
 macro because almost all calls are already within a block of UTF-32 only
@@ -1874,8 +1813,9 @@ table. */
 /* Flag bits and data types for the extended class (OP_XCLASS) for classes that
 contain characters with values greater than 255. */
 
-#define XCL_NOT    0x01    /* Flag: this is a negative class */
-#define XCL_MAP    0x02    /* Flag: a 32-byte map is present */
+#define XCL_NOT       0x01    /* Flag: this is a negative class */
+#define XCL_MAP       0x02    /* Flag: a 32-byte map is present */
+#define XCL_HASPROP   0x04    /* Flag: property checks are present. */
 
 #define XCL_END       0    /* Marks end of individual items */
 #define XCL_SINGLE    1    /* Single item (one multibyte char) follows */
@@ -2341,7 +2281,7 @@ enum { ERR0,  ERR1,  ERR2,  ERR3,  ERR4,  ERR5,  ERR6,  ERR7,  ERR8,  ERR9,
        ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,
        ERR60, ERR61, ERR62, ERR63, ERR64, ERR65, ERR66, ERR67, ERR68, ERR69,
        ERR70, ERR71, ERR72, ERR73, ERR74, ERR75, ERR76, ERR77, ERR78, ERR79,
-       ERR80, ERR81, ERR82, ERR83, ERR84, ERRCOUNT };
+       ERR80, ERR81, ERR82, ERR83, ERR84, ERR85, ERRCOUNT };
 
 /* JIT compiling modes. The function list is indexed by them. */
 
diff --git a/src/3rdparty/pcre/pcre_jit_compile.c b/src/3rdparty/pcre/pcre_jit_compile.c
index a318708b46..42a0a2278e 100644
--- a/src/3rdparty/pcre/pcre_jit_compile.c
+++ b/src/3rdparty/pcre/pcre_jit_compile.c
@@ -179,11 +179,12 @@ typedef struct jit_arguments {
 
 typedef struct executable_functions {
   void *executable_funcs[JIT_NUMBER_OF_COMPILE_MODES];
+  sljit_uw *read_only_data[JIT_NUMBER_OF_COMPILE_MODES];
+  sljit_uw executable_sizes[JIT_NUMBER_OF_COMPILE_MODES];
   PUBL(jit_callback) callback;
   void *userdata;
   pcre_uint32 top_bracket;
   pcre_uint32 limit_match;
-  sljit_uw executable_sizes[JIT_NUMBER_OF_COMPILE_MODES];
 } executable_functions;
 
 typedef struct jump_list {
@@ -197,6 +198,12 @@ typedef struct stub_list {
   struct stub_list *next;
 } stub_list;
 
+typedef struct label_addr_list {
+  struct sljit_label *label;
+  sljit_uw *addr;
+  struct label_addr_list *next;
+} label_addr_list;
+
 enum frame_types {
   no_frame = -1,
   no_stack = -2
@@ -306,7 +313,7 @@ typedef struct then_trap_backtrack {
   int framesize;
 } then_trap_backtrack;
 
-#define MAX_RANGE_SIZE 6
+#define MAX_RANGE_SIZE 4
 
 typedef struct compiler_common {
   /* The sljit ceneric compiler. */
@@ -315,6 +322,12 @@ typedef struct compiler_common {
   pcre_uchar *start;
   /* Maps private data offset to each opcode. */
   sljit_si *private_data_ptrs;
+  /* This read-only data is available during runtime. */
+  sljit_uw *read_only_data;
+  /* The total size of the read-only data. */
+  sljit_uw read_only_data_size;
+  /* The next free entry of the read_only_data. */
+  sljit_uw *read_only_data_ptr;
   /* Tells whether the capturing bracket is optimized. */
   pcre_uint8 *optimized_cbracket;
   /* Tells whether the starting offset is a target of then. */
@@ -349,6 +362,8 @@ typedef struct compiler_common {
   sljit_sw lcc;
   /* Mode can be PCRE_STUDY_JIT_COMPILE and others. */
   int mode;
+  /* TRUE, when minlength is greater than 0. */
+  BOOL might_be_empty;
   /* \K is found in the pattern. */
   BOOL has_set_som;
   /* (*SKIP:arg) is found in the pattern. */
@@ -363,13 +378,16 @@ typedef struct compiler_common {
   BOOL positive_assert;
   /* Newline control. */
   int nltype;
+  pcre_uint32 nlmax;
+  pcre_uint32 nlmin;
   int newline;
   int bsr_nltype;
+  pcre_uint32 bsr_nlmax;
+  pcre_uint32 bsr_nlmin;
   /* Dollar endonly. */
   int endonly;
   /* Tables. */
   sljit_sw ctypes;
-  int digits[2 + MAX_RANGE_SIZE];
   /* Named capturing brackets. */
   pcre_uchar *name_table;
   sljit_sw name_count;
@@ -380,7 +398,9 @@ typedef struct compiler_common {
   struct sljit_label *quit_label;
   struct sljit_label *forced_quit_label;
   struct sljit_label *accept_label;
+  struct sljit_label *ff_newline_shortcut;
   stub_list *stubs;
+  label_addr_list *label_addrs;
   recurse_entry *entries;
   recurse_entry *currententry;
   jump_list *partialmatch;
@@ -404,10 +424,9 @@ typedef struct compiler_common {
 #ifdef SUPPORT_UCP
   BOOL use_ucp;
 #endif
-#ifndef COMPILE_PCRE32
-  jump_list *utfreadchar;
-#endif
 #ifdef COMPILE_PCRE8
+  jump_list *utfreadchar;
+  jump_list *utfreadchar16;
   jump_list *utfreadtype8;
 #endif
 #endif /* SUPPORT_UTF */
@@ -524,6 +543,8 @@ the start pointers when the end of the capturing group has not yet reached. */
 #define GET_LOCAL_BASE(dst, dstw, offset) \
   sljit_get_local_base(compiler, (dst), (dstw), (offset))
 
+#define READ_CHAR_MAX 0x7fffffff
+
 static pcre_uchar* bracketend(pcre_uchar* cc)
 {
 SLJIT_ASSERT((*cc >= OP_ASSERT && *cc <= OP_ASSERTBACK_NOT) || (*cc >= OP_ONCE && *cc <= OP_SCOND));
@@ -533,6 +554,25 @@ cc += 1 + LINK_SIZE;
 return cc;
 }
 
+static int no_alternatives(pcre_uchar* cc)
+{
+int count = 0;
+SLJIT_ASSERT((*cc >= OP_ASSERT && *cc <= OP_ASSERTBACK_NOT) || (*cc >= OP_ONCE && *cc <= OP_SCOND));
+do
+  {
+  cc += GET(cc, 1);
+  count++;
+  }
+while (*cc == OP_ALT);
+SLJIT_ASSERT(*cc >= OP_KET && *cc <= OP_KETRPOS);
+return count;
+}
+
+static int ones_in_half_byte[16] = {
+  /* 0 */ 0, 1, 1, 2, /* 4 */ 1, 2, 2, 3,
+  /* 8 */ 1, 2, 2, 3, /* 12 */ 2, 3, 3, 4
+};
+
 /* Functions whose might need modification for all new supported opcodes:
  next_opcode
  check_opcode_types
@@ -752,6 +792,7 @@ while (cc < ccend)
     {
     case OP_SET_SOM:
     common->has_set_som = TRUE;
+    common->might_be_empty = TRUE;
     cc += 1;
     break;
 
@@ -761,6 +802,16 @@ while (cc < ccend)
     cc += 1 + IMM2_SIZE;
     break;
 
+    case OP_BRA:
+    case OP_CBRA:
+    case OP_SBRA:
+    case OP_SCBRA:
+    count = no_alternatives(cc);
+    if (count > 4)
+      common->read_only_data_size += count * sizeof(sljit_uw);
+    cc += 1 + LINK_SIZE + (*cc == OP_CBRA || *cc == OP_SCBRA ? IMM2_SIZE : 0);
+    break;
+
     case OP_CBRAPOS:
     case OP_SCBRAPOS:
     common->optimized_cbracket[GET2(cc, 1 + LINK_SIZE)] = 0;
@@ -2019,6 +2070,21 @@ while (list_item)
 common->stubs = NULL;
 }
 
+static void add_label_addr(compiler_common *common)
+{
+DEFINE_COMPILER;
+label_addr_list *label_addr;
+
+label_addr = sljit_alloc_memory(compiler, sizeof(label_addr_list));
+if (label_addr == NULL)
+  return;
+label_addr->label = LABEL();
+label_addr->addr = common->read_only_data_ptr;
+label_addr->next = common->label_addrs;
+common->label_addrs = label_addr;
+common->read_only_data_ptr++;
+}
+
 static SLJIT_INLINE void count_match(compiler_common *common)
 {
 DEFINE_COMPILER;
@@ -2457,107 +2523,290 @@ else
 JUMPHERE(jump);
 }
 
-static void read_char(compiler_common *common)
+static void peek_char(compiler_common *common, pcre_uint32 max)
 {
-/* Reads the character into TMP1, updates STR_PTR.
+/* Reads the character into TMP1, keeps STR_PTR.
 Does not check STR_END. TMP2 Destroyed. */
 DEFINE_COMPILER;
 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
 struct sljit_jump *jump;
 #endif
 
+SLJIT_UNUSED_ARG(max);
+
 OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
-#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
 if (common->utf)
   {
-#if defined COMPILE_PCRE8
+  if (max < 128) return;
+
   jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
-#elif defined COMPILE_PCRE16
-  jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
-#endif /* COMPILE_PCRE[8|16] */
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   add_jump(compiler, &common->utfreadchar, JUMP(SLJIT_FAST_CALL));
+  OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
   JUMPHERE(jump);
   }
 #endif /* SUPPORT_UTF && !COMPILE_PCRE32 */
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE16
+if (common->utf)
+  {
+  if (max < 0xd800) return;
+
+  OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
+  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+  /* TMP2 contains the high surrogate. */
+  OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+  OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x40);
+  OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 10);
+  OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3ff);
+  OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+  JUMPHERE(jump);
+  }
+#endif
+}
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+
+static BOOL is_char7_bitset(const pcre_uint8 *bitset, BOOL nclass)
+{
+/* Tells whether the character codes below 128 are enough
+to determine a match. */
+const pcre_uint8 value = nclass ? 0xff : 0;
+const pcre_uint8* end = bitset + 32;
+
+bitset += 16;
+do
+  {
+  if (*bitset++ != value)
+    return FALSE;
+  }
+while (bitset < end);
+return TRUE;
+}
+
+static void read_char7_type(compiler_common *common, BOOL full_read)
+{
+/* Reads the precise character type of a character into TMP1, if the character
+is less than 128. Otherwise it returns with zero. Does not check STR_END. The
+full_read argument tells whether characters above max are accepted or not. */
+DEFINE_COMPILER;
+struct sljit_jump *jump;
+
+SLJIT_ASSERT(common->utf);
+
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), 0);
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
+
+if (full_read)
+  {
+  jump = CMP(SLJIT_C_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
+  OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), (sljit_sw)PRIV(utf8_table4) - 0xc0);
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
+  JUMPHERE(jump);
+  }
 }
 
-static void peek_char(compiler_common *common)
+#endif /* SUPPORT_UTF && COMPILE_PCRE8 */
+
+static void read_char_range(compiler_common *common, pcre_uint32 min, pcre_uint32 max, BOOL update_str_ptr)
 {
-/* Reads the character into TMP1, keeps STR_PTR.
-Does not check STR_END. TMP2 Destroyed. */
+/* Reads the precise value of a character into TMP1, if the character is
+between min and max (c >= min && c <= max). Otherwise it returns with a value
+outside the range. Does not check STR_END. */
 DEFINE_COMPILER;
 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
 struct sljit_jump *jump;
 #endif
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+struct sljit_jump *jump2;
+#endif
 
-OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
-#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+SLJIT_UNUSED_ARG(update_str_ptr);
+SLJIT_UNUSED_ARG(min);
+SLJIT_UNUSED_ARG(max);
+SLJIT_ASSERT(min <= max);
+
+OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
 if (common->utf)
   {
-#if defined COMPILE_PCRE8
+  if (max < 128 && !update_str_ptr) return;
+
   jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
-#elif defined COMPILE_PCRE16
-  jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
-#endif /* COMPILE_PCRE[8|16] */
-  add_jump(compiler, &common->utfreadchar, JUMP(SLJIT_FAST_CALL));
-  OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
+  if (min >= 0x10000)
+    {
+    OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xf0);
+    if (update_str_ptr)
+      OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
+    OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+    jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0x7);
+    OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+    OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(2));
+    if (!update_str_ptr)
+      OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(3));
+    OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    JUMPHERE(jump2);
+    if (update_str_ptr)
+      OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, RETURN_ADDR, 0);
+    }
+  else if (min >= 0x800 && max <= 0xffff)
+    {
+    OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xe0);
+    if (update_str_ptr)
+      OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
+    OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+    jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xf);
+    OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+    if (!update_str_ptr)
+      OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
+    OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    JUMPHERE(jump2);
+    if (update_str_ptr)
+      OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, RETURN_ADDR, 0);
+    }
+  else if (max >= 0x800)
+    add_jump(compiler, (max < 0x10000) ? &common->utfreadchar16 : &common->utfreadchar, JUMP(SLJIT_FAST_CALL));
+  else if (max < 128)
+    {
+    OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
+    OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
+    }
+  else
+    {
+    OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+    if (!update_str_ptr)
+      OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+    else
+      OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
+    OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    if (update_str_ptr)
+      OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, RETURN_ADDR, 0);
+    }
   JUMPHERE(jump);
   }
-#endif /* SUPPORT_UTF && !COMPILE_PCRE32 */
+#endif
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE16
+if (common->utf)
+  {
+  if (max >= 0x10000)
+    {
+    OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
+    jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+    /* TMP2 contains the high surrogate. */
+    OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+    OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x40);
+    OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 10);
+    OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+    OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3ff);
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+    JUMPHERE(jump);
+    return;
+    }
+
+  if (max < 0xd800 && !update_str_ptr) return;
+
+  /* Skip low surrogate if necessary. */
+  OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
+  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+  if (update_str_ptr)
+    OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+  if (max >= 0xd800)
+    OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0x10000);
+  JUMPHERE(jump);
+  }
+#endif
+}
+
+static SLJIT_INLINE void read_char(compiler_common *common)
+{
+read_char_range(common, 0, READ_CHAR_MAX, TRUE);
 }
 
-static void read_char8_type(compiler_common *common)
+static void read_char8_type(compiler_common *common, BOOL update_str_ptr)
 {
 /* Reads the character type into TMP1, updates STR_PTR. Does not check STR_END. */
 DEFINE_COMPILER;
-#if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
 struct sljit_jump *jump;
 #endif
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+struct sljit_jump *jump2;
+#endif
 
-#ifdef SUPPORT_UTF
+SLJIT_UNUSED_ARG(update_str_ptr);
+
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), 0);
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
 if (common->utf)
   {
-  OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), 0);
-  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-#if defined COMPILE_PCRE8
   /* This can be an extra read in some situations, but hopefully
   it is needed in most cases. */
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
   jump = CMP(SLJIT_C_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
-  add_jump(compiler, &common->utfreadtype8, JUMP(SLJIT_FAST_CALL));
-  JUMPHERE(jump);
-#elif defined COMPILE_PCRE16
-  OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
-  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
-  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
-  JUMPHERE(jump);
-  /* Skip low surrogate if necessary. */
-  OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0xfc00);
-  OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, 0xd800);
-  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
-  OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 1);
-  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
-#elif defined COMPILE_PCRE32
-  OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
-  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
-  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
+  if (!update_str_ptr)
+    {
+    OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+    OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+    OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
+    OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
+    OP2(SLJIT_OR, TMP2, 0, TMP2, 0, TMP1, 0);
+    OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
+    jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
+    OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
+    JUMPHERE(jump2);
+    }
+  else
+    add_jump(compiler, &common->utfreadtype8, JUMP(SLJIT_FAST_CALL));
   JUMPHERE(jump);
-#endif /* COMPILE_PCRE[8|16|32] */
   return;
   }
-#endif /* SUPPORT_UTF */
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), 0);
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
+#endif /* SUPPORT_UTF && COMPILE_PCRE8 */
+
+#if !defined COMPILE_PCRE8
 /* The ctypes array contains only 256 values. */
 OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
 jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
 #endif
 OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
-#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
+#if !defined COMPILE_PCRE8
 JUMPHERE(jump);
 #endif
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE16
+if (common->utf && update_str_ptr)
+  {
+  /* Skip low surrogate if necessary. */
+  OP2(SLJIT_SUB, TMP2, 0, TMP2, 0, SLJIT_IMM, 0xd800);
+  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+  JUMPHERE(jump);
+  }
+#endif /* SUPPORT_UTF && COMPILE_PCRE16 */
 }
 
 static void skip_char_back(compiler_common *common)
@@ -2595,28 +2844,35 @@ if (common->utf)
 OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 }
 
-static void check_newlinechar(compiler_common *common, int nltype, jump_list **backtracks, BOOL jumpiftrue)
+static void check_newlinechar(compiler_common *common, int nltype, jump_list **backtracks, BOOL jumpifmatch)
 {
 /* Character comes in TMP1. Checks if it is a newline. TMP2 may be destroyed. */
 DEFINE_COMPILER;
+struct sljit_jump *jump;
 
 if (nltype == NLTYPE_ANY)
   {
   add_jump(compiler, &common->anynewline, JUMP(SLJIT_FAST_CALL));
-  add_jump(compiler, backtracks, JUMP(jumpiftrue ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+  add_jump(compiler, backtracks, JUMP(jumpifmatch ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
   }
 else if (nltype == NLTYPE_ANYCRLF)
   {
-  OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_CR);
-  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
-  OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_NL);
-  OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
-  add_jump(compiler, backtracks, JUMP(jumpiftrue ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+  if (jumpifmatch)
+    {
+    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR));
+    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+    }
+  else
+    {
+    jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+    JUMPHERE(jump);
+    }
   }
 else
   {
   SLJIT_ASSERT(nltype == NLTYPE_FIXED && common->newline < 256);
-  add_jump(compiler, backtracks, CMP(jumpiftrue ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
+  add_jump(compiler, backtracks, CMP(jumpifmatch ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
   }
 }
 
@@ -2626,58 +2882,84 @@ else
 static void do_utfreadchar(compiler_common *common)
 {
 /* Fast decoding a UTF-8 character. TMP1 contains the first byte
-of the character (>= 0xc0). Return char value in TMP1, length - 1 in TMP2. */
+of the character (>= 0xc0). Return char value in TMP1, length in TMP2. */
 DEFINE_COMPILER;
 struct sljit_jump *jump;
 
 sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
+OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
+OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
+OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
+
 /* Searching for the first zero. */
-OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x20);
+OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x800);
 jump = JUMP(SLJIT_C_NOT_ZERO);
 /* Two byte sequence. */
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x1f);
+OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(2));
+sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
+
+JUMPHERE(jump);
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+OP2(SLJIT_XOR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x800);
 OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
 OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
 OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-JUMPHERE(jump);
 
-OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x10);
+OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x10000);
 jump = JUMP(SLJIT_C_NOT_ZERO);
 /* Three byte sequence. */
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x0f);
-OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 12);
-OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
-OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
-OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(2));
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
-OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
-OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(2));
+OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(3));
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-JUMPHERE(jump);
 
 /* Four byte sequence. */
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x07);
-OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 18);
+JUMPHERE(jump);
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(2));
+OP2(SLJIT_XOR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x10000);
+OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(3));
 OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
-OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 12);
 OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(2));
+OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(4));
+sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
+}
+
+static void do_utfreadchar16(compiler_common *common)
+{
+/* Fast decoding a UTF-8 character. TMP1 contains the first byte
+of the character (>= 0xc0). Return value in TMP1. */
+DEFINE_COMPILER;
+struct sljit_jump *jump;
+
+sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
+OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
+OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
 OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
-OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
 OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(3));
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(3));
+
+/* Searching for the first zero. */
+OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x800);
+jump = JUMP(SLJIT_C_NOT_ZERO);
+/* Two byte sequence. */
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
+
+JUMPHERE(jump);
+OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x400);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_NOT_ZERO);
+/* This code runs only in 8 bit mode. No need to shift the value. */
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
+OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+OP2(SLJIT_XOR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x800);
+OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 6);
 OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3f);
 OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(3));
+/* Three byte sequence. */
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 }
 
@@ -2697,53 +2979,27 @@ jump = JUMP(SLJIT_C_NOT_ZERO);
 OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x1f);
+/* The upper 5 bits are known at this point. */
+compare = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0x3);
 OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
 OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
 OP2(SLJIT_OR, TMP2, 0, TMP2, 0, TMP1, 0);
-compare = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
 OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 
 JUMPHERE(compare);
 OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-JUMPHERE(jump);
 
 /* We only have types for characters less than 256. */
-OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), (sljit_sw)PRIV(utf8_table4) - 0xc0);
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
-OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
-sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-}
-
-#elif defined COMPILE_PCRE16
-
-static void do_utfreadchar(compiler_common *common)
-{
-/* Fast decoding a UTF-16 character. TMP1 contains the first 16 bit char
-of the character (>= 0xd800). Return char value in TMP1, length - 1 in TMP2. */
-DEFINE_COMPILER;
-struct sljit_jump *jump;
-
-sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
-jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xdc00);
-/* Do nothing, only return. */
-sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-
 JUMPHERE(jump);
-/* Combine two 16 bit characters. */
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3ff);
-OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 10);
-OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x3ff);
-OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
-OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x10000);
+OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), (sljit_sw)PRIV(utf8_table4) - 0xc0);
+OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
+OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 }
 
-#endif /* COMPILE_PCRE[8|16] */
+#endif /* COMPILE_PCRE8 */
 
 #endif /* SUPPORT_UTF */
 
@@ -2818,7 +3074,7 @@ if (firstline)
     mainloop = LABEL();
     /* Continual stores does not cause data dependency. */
     OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_LOCALS_REG), common->first_line_end, STR_PTR, 0);
-    read_char(common);
+    read_char_range(common, common->nlmin, common->nlmax, TRUE);
     check_newlinechar(common, common->nltype, &newline, TRUE);
     CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop);
     JUMPHERE(end);
@@ -2894,37 +3150,66 @@ if (newlinecheck)
 return mainloop;
 }
 
-#define MAX_N_CHARS 3
+#define MAX_N_CHARS 16
+#define MAX_N_BYTES 8
 
-static SLJIT_INLINE BOOL fast_forward_first_n_chars(compiler_common *common, BOOL firstline)
+static SLJIT_INLINE void add_prefix_byte(pcre_uint8 byte, pcre_uint8 *bytes)
 {
-DEFINE_COMPILER;
-struct sljit_label *start;
-struct sljit_jump *quit;
-pcre_uint32 chars[MAX_N_CHARS * 2];
-pcre_uchar *cc = common->start + 1 + LINK_SIZE;
-int location = 0;
-pcre_int32 len, c, bit, caseless;
-int must_stop;
+pcre_uint8 len = bytes[0];
+int i;
 
-/* We do not support alternatives now. */
-if (*(common->start + GET(common->start, 1)) == OP_ALT)
-  return FALSE;
+if (len == 255)
+  return;
+
+if (len == 0)
+  {
+  bytes[0] = 1;
+  bytes[1] = byte;
+  return;
+  }
+
+for (i = len; i > 0; i--)
+  if (bytes[i] == byte)
+    return;
 
+if (len >= MAX_N_BYTES - 1)
+  {
+  bytes[0] = 255;
+  return;
+  }
+
+len++;
+bytes[len] = byte;
+bytes[0] = len;
+}
+
+static int scan_prefix(compiler_common *common, pcre_uchar *cc, pcre_uint32 *chars, pcre_uint8 *bytes, int max_chars)
+{
+/* Recursive function, which scans prefix literals. */
+BOOL last, any, caseless;
+int len, repeat, len_save, consumed = 0;
+pcre_uint32 chr, mask;
+pcre_uchar *alternative, *cc_save, *oc;
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+pcre_uchar othercase[8];
+#elif defined SUPPORT_UTF && defined COMPILE_PCRE16
+pcre_uchar othercase[2];
+#else
+pcre_uchar othercase[1];
+#endif
+
+repeat = 1;
 while (TRUE)
   {
-  caseless = 0;
-  must_stop = 1;
-  switch(*cc)
+  last = TRUE;
+  any = FALSE;
+  caseless = FALSE;
+  switch (*cc)
     {
-    case OP_CHAR:
-    must_stop = 0;
-    cc++;
-    break;
-
     case OP_CHARI:
-    caseless = 1;
-    must_stop = 0;
+    caseless = TRUE;
+    case OP_CHAR:
+    last = FALSE;
     cc++;
     break;
 
@@ -2943,125 +3228,546 @@ while (TRUE)
     cc++;
     continue;
 
+    case OP_ASSERT:
+    case OP_ASSERT_NOT:
+    case OP_ASSERTBACK:
+    case OP_ASSERTBACK_NOT:
+    cc = bracketend(cc);
+    continue;
+
+    case OP_PLUSI:
+    case OP_MINPLUSI:
+    case OP_POSPLUSI:
+    caseless = TRUE;
     case OP_PLUS:
     case OP_MINPLUS:
     case OP_POSPLUS:
     cc++;
     break;
 
+    case OP_EXACTI:
+    caseless = TRUE;
     case OP_EXACT:
+    repeat = GET2(cc, 1);
+    last = FALSE;
     cc += 1 + IMM2_SIZE;
     break;
 
-    case OP_PLUSI:
-    case OP_MINPLUSI:
-    case OP_POSPLUSI:
-    caseless = 1;
+    case OP_QUERYI:
+    case OP_MINQUERYI:
+    case OP_POSQUERYI:
+    caseless = TRUE;
+    case OP_QUERY:
+    case OP_MINQUERY:
+    case OP_POSQUERY:
+    len = 1;
     cc++;
+#ifdef SUPPORT_UTF
+    if (common->utf && HAS_EXTRALEN(*cc)) len += GET_EXTRALEN(*cc);
+#endif
+    max_chars = scan_prefix(common, cc + len, chars, bytes, max_chars);
+    if (max_chars == 0)
+      return consumed;
+    last = FALSE;
     break;
 
-    case OP_EXACTI:
-    caseless = 1;
+    case OP_KET:
+    cc += 1 + LINK_SIZE;
+    continue;
+
+    case OP_ALT:
+    cc += GET(cc, 1);
+    continue;
+
+    case OP_ONCE:
+    case OP_ONCE_NC:
+    case OP_BRA:
+    case OP_BRAPOS:
+    case OP_CBRA:
+    case OP_CBRAPOS:
+    alternative = cc + GET(cc, 1);
+    while (*alternative == OP_ALT)
+      {
+      max_chars = scan_prefix(common, alternative + 1 + LINK_SIZE, chars, bytes, max_chars);
+      if (max_chars == 0)
+        return consumed;
+      alternative += GET(alternative, 1);
+      }
+
+    if (*cc == OP_CBRA || *cc == OP_CBRAPOS)
+      cc += IMM2_SIZE;
+    cc += 1 + LINK_SIZE;
+    continue;
+
+    case OP_CLASS:
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+    if (common->utf && !is_char7_bitset((const pcre_uint8 *)(cc + 1), FALSE)) return consumed;
+#endif
+    any = TRUE;
+    cc += 1 + 32 / sizeof(pcre_uchar);
+    break;
+
+    case OP_NCLASS:
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+    if (common->utf) return consumed;
+#endif
+    any = TRUE;
+    cc += 1 + 32 / sizeof(pcre_uchar);
+    break;
+
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+    case OP_XCLASS:
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+    if (common->utf) return consumed;
+#endif
+    any = TRUE;
+    cc += GET(cc, 1);
+    break;
+#endif
+
+    case OP_DIGIT:
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+    if (common->utf && !is_char7_bitset((const pcre_uint8 *)common->ctypes - cbit_length + cbit_digit, FALSE))
+      return consumed;
+#endif
+    any = TRUE;
+    cc++;
+    break;
+
+    case OP_WHITESPACE:
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+    if (common->utf && !is_char7_bitset((const pcre_uint8 *)common->ctypes - cbit_length + cbit_space, FALSE))
+      return consumed;
+#endif
+    any = TRUE;
+    cc++;
+    break;
+
+    case OP_WORDCHAR:
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+    if (common->utf && !is_char7_bitset((const pcre_uint8 *)common->ctypes - cbit_length + cbit_word, FALSE))
+      return consumed;
+#endif
+    any = TRUE;
+    cc++;
+    break;
+
+    case OP_NOT:
+    case OP_NOTI:
+    cc++;
+    /* Fall through. */
+    case OP_NOT_DIGIT:
+    case OP_NOT_WHITESPACE:
+    case OP_NOT_WORDCHAR:
+    case OP_ANY:
+    case OP_ALLANY:
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+    if (common->utf) return consumed;
+#endif
+    any = TRUE;
+    cc++;
+    break;
+
+#ifdef SUPPORT_UCP
+    case OP_NOTPROP:
+    case OP_PROP:
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+    if (common->utf) return consumed;
+#endif
+    any = TRUE;
+    cc += 1 + 2;
+    break;
+#endif
+
+    case OP_TYPEEXACT:
+    repeat = GET2(cc, 1);
     cc += 1 + IMM2_SIZE;
+    continue;
+
+    case OP_NOTEXACT:
+    case OP_NOTEXACTI:
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+    if (common->utf) return consumed;
+#endif
+    any = TRUE;
+    repeat = GET2(cc, 1);
+    cc += 1 + IMM2_SIZE + 1;
     break;
 
     default:
-    must_stop = 2;
-    break;
+    return consumed;
     }
 
-  if (must_stop == 2)
-      break;
+  if (any)
+    {
+#if defined COMPILE_PCRE8
+    mask = 0xff;
+#elif defined COMPILE_PCRE16
+    mask = 0xffff;
+#elif defined COMPILE_PCRE32
+    mask = 0xffffffff;
+#else
+    SLJIT_ASSERT_STOP();
+#endif
+
+    do
+      {
+      chars[0] = mask;
+      chars[1] = mask;
+      bytes[0] = 255;
+
+      consumed++;
+      if (--max_chars == 0)
+        return consumed;
+      chars += 2;
+      bytes += MAX_N_BYTES;
+      }
+    while (--repeat > 0);
+
+    repeat = 1;
+    continue;
+    }
 
   len = 1;
 #ifdef SUPPORT_UTF
-  if (common->utf && HAS_EXTRALEN(cc[0])) len += GET_EXTRALEN(cc[0]);
+  if (common->utf && HAS_EXTRALEN(*cc)) len += GET_EXTRALEN(*cc);
 #endif
 
   if (caseless && char_has_othercase(common, cc))
     {
-    caseless = char_get_othercase_bit(common, cc);
-    if (caseless == 0)
-      return FALSE;
-#ifdef COMPILE_PCRE8
-    caseless = ((caseless & 0xff) << 8) | (len - (caseless >> 8));
-#else
-    if ((caseless & 0x100) != 0)
-      caseless = ((caseless & 0xff) << 16) | (len - (caseless >> 9));
+#ifdef SUPPORT_UTF
+    if (common->utf)
+      {
+      GETCHAR(chr, cc);
+      if ((int)PRIV(ord2utf)(char_othercase(common, chr), othercase) != len)
+        return consumed;
+      }
     else
-      caseless = ((caseless & 0xff) << 8) | (len - (caseless >> 9));
 #endif
+      {
+      chr = *cc;
+      othercase[0] = TABLE_GET(chr, common->fcc, chr);
+      }
     }
   else
-    caseless = 0;
+    caseless = FALSE;
 
-  while (len > 0 && location < MAX_N_CHARS * 2)
+  len_save = len;
+  cc_save = cc;
+  while (TRUE)
     {
-    c = *cc;
-    bit = 0;
-    if (len == (caseless & 0xff))
+    oc = othercase;
+    do
       {
-      bit = caseless >> 8;
-      c |= bit;
+      chr = *cc;
+#ifdef COMPILE_PCRE32
+      if (SLJIT_UNLIKELY(chr == NOTACHAR))
+        return consumed;
+#endif
+      add_prefix_byte((pcre_uint8)chr, bytes);
+
+      mask = 0;
+      if (caseless)
+        {
+        add_prefix_byte((pcre_uint8)*oc, bytes);
+        mask = *cc ^ *oc;
+        chr |= mask;
+        }
+
+#ifdef COMPILE_PCRE32
+      if (chars[0] == NOTACHAR && chars[1] == 0)
+#else
+      if (chars[0] == NOTACHAR)
+#endif
+        {
+        chars[0] = chr;
+        chars[1] = mask;
+        }
+      else
+        {
+        mask |= chars[0] ^ chr;
+        chr |= mask;
+        chars[0] = chr;
+        chars[1] |= mask;
+        }
+
+      len--;
+      consumed++;
+      if (--max_chars == 0)
+        return consumed;
+      chars += 2;
+      bytes += MAX_N_BYTES;
+      cc++;
+      oc++;
       }
+    while (len > 0);
 
-    chars[location] = c;
-    chars[location + 1] = bit;
+    if (--repeat == 0)
+      break;
 
-    len--;
-    location += 2;
-    cc++;
+    len = len_save;
+    cc = cc_save;
+    }
+
+  repeat = 1;
+  if (last)
+    return consumed;
+  }
+}
+
+static SLJIT_INLINE BOOL fast_forward_first_n_chars(compiler_common *common, BOOL firstline)
+{
+DEFINE_COMPILER;
+struct sljit_label *start;
+struct sljit_jump *quit;
+pcre_uint32 chars[MAX_N_CHARS * 2];
+pcre_uint8 bytes[MAX_N_CHARS * MAX_N_BYTES];
+pcre_uint8 ones[MAX_N_CHARS];
+int offsets[3];
+pcre_uint32 mask;
+pcre_uint8 *byte_set, *byte_set_end;
+int i, max, from;
+int range_right = -1, range_len = 3 - 1;
+sljit_ub *update_table = NULL;
+BOOL in_range;
+
+/* This is even TRUE, if both are NULL. */
+SLJIT_ASSERT(common->read_only_data_ptr == common->read_only_data);
+
+for (i = 0; i < MAX_N_CHARS; i++)
+  {
+  chars[i << 1] = NOTACHAR;
+  chars[(i << 1) + 1] = 0;
+  bytes[i * MAX_N_BYTES] = 0;
+  }
+
+max = scan_prefix(common, common->start, chars, bytes, MAX_N_CHARS);
+
+if (max <= 1)
+  return FALSE;
+
+for (i = 0; i < max; i++)
+  {
+  mask = chars[(i << 1) + 1];
+  ones[i] = ones_in_half_byte[mask & 0xf];
+  mask >>= 4;
+  while (mask != 0)
+    {
+    ones[i] += ones_in_half_byte[mask & 0xf];
+    mask >>= 4;
+    }
+  }
+
+in_range = FALSE;
+from = 0;   /* Prevent compiler "uninitialized" warning */
+for (i = 0; i <= max; i++)
+  {
+  if (in_range && (i - from) > range_len && (bytes[(i - 1) * MAX_N_BYTES] <= 4))
+    {
+    range_len = i - from;
+    range_right = i - 1;
+    }
+
+  if (i < max && bytes[i * MAX_N_BYTES] < 255)
+    {
+    if (!in_range)
+      {
+      in_range = TRUE;
+      from = i;
+      }
+    }
+  else if (in_range)
+    in_range = FALSE;
+  }
+
+if (range_right >= 0)
+  {
+  /* Since no data is consumed (see the assert in the beginning
+  of this function), this space can be reallocated. */
+  if (common->read_only_data)
+    SLJIT_FREE(common->read_only_data);
+
+  common->read_only_data_size += 256;
+  common->read_only_data = (sljit_uw *)SLJIT_MALLOC(common->read_only_data_size);
+  if (common->read_only_data == NULL)
+    return TRUE;
+
+  update_table = (sljit_ub *)common->read_only_data;
+  common->read_only_data_ptr = (sljit_uw *)(update_table + 256);
+  memset(update_table, IN_UCHARS(range_len), 256);
+
+  for (i = 0; i < range_len; i++)
+    {
+    byte_set = bytes + ((range_right - i) * MAX_N_BYTES);
+    SLJIT_ASSERT(byte_set[0] > 0 && byte_set[0] < 255);
+    byte_set_end = byte_set + byte_set[0];
+    byte_set++;
+    while (byte_set <= byte_set_end)
+      {
+      if (update_table[*byte_set] > IN_UCHARS(i))
+        update_table[*byte_set] = IN_UCHARS(i);
+      byte_set++;
+      }
     }
+  }
 
-  if (location >= MAX_N_CHARS * 2 || must_stop != 0)
+offsets[0] = -1;
+/* Scan forward. */
+for (i = 0; i < max; i++)
+  if (ones[i] <= 2) {
+    offsets[0] = i;
     break;
   }
 
-/* At least two characters are required. */
-if (location < 2 * 2)
+if (offsets[0] < 0 && range_right < 0)
+  return FALSE;
+
+if (offsets[0] >= 0)
+  {
+  /* Scan backward. */
+  offsets[1] = -1;
+  for (i = max - 1; i > offsets[0]; i--)
+    if (ones[i] <= 2 && i != range_right)
+      {
+      offsets[1] = i;
+      break;
+      }
+
+  /* This case is handled better by fast_forward_first_char. */
+  if (offsets[1] == -1 && offsets[0] == 0 && range_right < 0)
     return FALSE;
 
+  offsets[2] = -1;
+  /* We only search for a middle character if there is no range check. */
+  if (offsets[1] >= 0 && range_right == -1)
+    {
+    /* Scan from middle. */
+    for (i = (offsets[0] + offsets[1]) / 2 + 1; i < offsets[1]; i++)
+      if (ones[i] <= 2)
+        {
+        offsets[2] = i;
+        break;
+        }
+
+    if (offsets[2] == -1)
+      {
+      for (i = (offsets[0] + offsets[1]) / 2; i > offsets[0]; i--)
+        if (ones[i] <= 2)
+          {
+          offsets[2] = i;
+          break;
+          }
+      }
+    }
+
+  SLJIT_ASSERT(offsets[1] == -1 || (offsets[0] < offsets[1]));
+  SLJIT_ASSERT(offsets[2] == -1 || (offsets[0] < offsets[2] && offsets[1] > offsets[2]));
+
+  chars[0] = chars[offsets[0] << 1];
+  chars[1] = chars[(offsets[0] << 1) + 1];
+  if (offsets[2] >= 0)
+    {
+    chars[2] = chars[offsets[2] << 1];
+    chars[3] = chars[(offsets[2] << 1) + 1];
+    }
+  if (offsets[1] >= 0)
+    {
+    chars[4] = chars[offsets[1] << 1];
+    chars[5] = chars[(offsets[1] << 1) + 1];
+    }
+  }
+
+max -= 1;
 if (firstline)
   {
   SLJIT_ASSERT(common->first_line_end != 0);
+  OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), common->first_line_end);
   OP1(SLJIT_MOV, TMP3, 0, STR_END, 0);
-  OP2(SLJIT_SUB, STR_END, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), common->first_line_end, SLJIT_IMM, IN_UCHARS((location >> 1) - 1));
+  OP2(SLJIT_SUB, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS(max));
+  quit = CMP(SLJIT_C_LESS_EQUAL, STR_END, 0, TMP1, 0);
+  OP1(SLJIT_MOV, STR_END, 0, TMP1, 0);
+  JUMPHERE(quit);
   }
 else
-  OP2(SLJIT_SUB, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS((location >> 1) - 1));
+  OP2(SLJIT_SUB, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS(max));
+
+#if !(defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+if (range_right >= 0)
+  OP1(SLJIT_MOV, RETURN_ADDR, 0, SLJIT_IMM, (sljit_sw)update_table);
+#endif
 
 start = LABEL();
 quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
 
-OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
-OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-if (chars[1] != 0)
-  OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[1]);
-CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[0], start);
-if (location > 2 * 2)
-  OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-if (chars[3] != 0)
-  OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, chars[3]);
-CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, chars[2], start);
-if (location > 2 * 2)
-  {
-  if (chars[5] != 0)
-    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[5]);
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[4], start);
+SLJIT_ASSERT(range_right >= 0 || offsets[0] >= 0);
+
+if (range_right >= 0)
+  {
+#if defined COMPILE_PCRE8 || (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
+  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(range_right));
+#else
+  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(range_right + 1) - 1);
+#endif
+
+#if !(defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM2(RETURN_ADDR, TMP1), 0);
+#else
+  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)update_table);
+#endif
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
+  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, start);
+  }
+
+if (offsets[0] >= 0)
+  {
+  OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(offsets[0]));
+  if (offsets[1] >= 0)
+    OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(offsets[1]));
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+  if (chars[1] != 0)
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[1]);
+  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[0], start);
+  if (offsets[2] >= 0)
+    OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(offsets[2] - 1));
+
+  if (offsets[1] >= 0)
+    {
+    if (chars[5] != 0)
+      OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, chars[5]);
+    CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, chars[4], start);
+    }
+
+  if (offsets[2] >= 0)
+    {
+    if (chars[3] != 0)
+      OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[3]);
+    CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[2], start);
+    }
+  OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   }
-OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 
 JUMPHERE(quit);
 
 if (firstline)
+  {
+  if (range_right >= 0)
+    OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), common->first_line_end);
   OP1(SLJIT_MOV, STR_END, 0, TMP3, 0);
+  if (range_right >= 0)
+    {
+    quit = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
+    OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
+    JUMPHERE(quit);
+    }
+  }
 else
-  OP2(SLJIT_ADD, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS((location >> 1) - 1));
+  OP2(SLJIT_ADD, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS(max));
 return TRUE;
 }
 
 #undef MAX_N_CHARS
+#undef MAX_N_BYTES
 
 static SLJIT_INLINE void fast_forward_first_char(compiler_common *common, pcre_uchar first_char, BOOL caseless, BOOL firstline)
 {
@@ -3167,7 +3873,7 @@ if (common->nltype == NLTYPE_FIXED && common->newline > 255)
   JUMPHERE(lastchar);
 
   if (firstline)
-    OP1(SLJIT_MOV, STR_END, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), POSSESSIVE0);
+    OP1(SLJIT_MOV, STR_END, 0, TMP3, 0);
   return;
   }
 
@@ -3177,7 +3883,9 @@ firstchar = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
 skip_char_back(common);
 
 loop = LABEL();
-read_char(common);
+common->ff_newline_shortcut = loop;
+
+read_char_range(common, common->nlmin, common->nlmax, TRUE);
 lastchar = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
 if (common->nltype == NLTYPE_ANY || common->nltype == NLTYPE_ANYCRLF)
   foundcr = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
@@ -3206,24 +3914,19 @@ if (firstline)
   OP1(SLJIT_MOV, STR_END, 0, TMP3, 0);
 }
 
-static BOOL check_class_ranges(compiler_common *common, const pcre_uint8 *bits, BOOL nclass, jump_list **backtracks);
+static BOOL check_class_ranges(compiler_common *common, const pcre_uint8 *bits, BOOL nclass, BOOL invert, jump_list **backtracks);
 
-static SLJIT_INLINE void fast_forward_start_bits(compiler_common *common, sljit_uw start_bits, BOOL firstline)
+static SLJIT_INLINE void fast_forward_start_bits(compiler_common *common, pcre_uint8 *start_bits, BOOL firstline)
 {
 DEFINE_COMPILER;
 struct sljit_label *start;
 struct sljit_jump *quit;
 struct sljit_jump *found = NULL;
 jump_list *matches = NULL;
-pcre_uint8 inverted_start_bits[32];
-int i;
 #ifndef COMPILE_PCRE8
 struct sljit_jump *jump;
 #endif
 
-for (i = 0; i < 32; ++i)
-  inverted_start_bits[i] = ~(((pcre_uint8*)start_bits)[i]);
-
 if (firstline)
   {
   SLJIT_ASSERT(common->first_line_end != 0);
@@ -3239,7 +3942,7 @@ if (common->utf)
   OP1(SLJIT_MOV, TMP3, 0, TMP1, 0);
 #endif
 
-if (!check_class_ranges(common, inverted_start_bits, (inverted_start_bits[31] & 0x80) != 0, &matches))
+if (!check_class_ranges(common, start_bits, (start_bits[31] & 0x80) != 0, TRUE, &matches))
   {
 #ifndef COMPILE_PCRE8
   jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 255);
@@ -3248,7 +3951,7 @@ if (!check_class_ranges(common, inverted_start_bits, (inverted_start_bits[31] &
 #endif
   OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
   OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
-  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), start_bits);
+  OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)start_bits);
   OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
   found = JUMP(SLJIT_C_NOT_ZERO);
@@ -3451,7 +4154,7 @@ JUMPHERE(skipread);
 
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 0);
 check_str_end(common, &skipread_list);
-peek_char(common);
+peek_char(common, READ_CHAR_MAX);
 
 /* Testing char type. This is a code duplication. */
 #ifdef SUPPORT_UCP
@@ -3497,112 +4200,15 @@ OP2(SLJIT_XOR | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_MEM1(SLJIT_LOCALS_R
 sljit_emit_fast_return(compiler, SLJIT_MEM1(SLJIT_LOCALS_REG), LOCALS0);
 }
 
-/*
-  range format:
-
-  ranges[0] = length of the range (max MAX_RANGE_SIZE, -1 means invalid range).
-  ranges[1] = first bit (0 or 1)
-  ranges[2-length] = position of the bit change (when the current bit is not equal to the previous)
-*/
-
-static BOOL check_ranges(compiler_common *common, int *ranges, jump_list **backtracks, BOOL readch)
+static BOOL check_class_ranges(compiler_common *common, const pcre_uint8 *bits, BOOL nclass, BOOL invert, jump_list **backtracks)
 {
 DEFINE_COMPILER;
-struct sljit_jump *jump;
-
-if (ranges[0] < 0)
-  return FALSE;
-
-switch(ranges[0])
-  {
-  case 1:
-  if (readch)
-    read_char(common);
-  add_jump(compiler, backtracks, CMP(ranges[1] == 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
-  return TRUE;
-
-  case 2:
-  if (readch)
-    read_char(common);
-  OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2]);
-  add_jump(compiler, backtracks, CMP(ranges[1] != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
-  return TRUE;
-
-  case 4:
-  if (ranges[2] + 1 == ranges[3] && ranges[4] + 1 == ranges[5])
-    {
-    if (readch)
-      read_char(common);
-    if (ranges[1] != 0)
-      {
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[4]));
-      }
-    else
-      {
-      jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[4]));
-      JUMPHERE(jump);
-      }
-    return TRUE;
-    }
-  if ((ranges[3] - ranges[2]) == (ranges[5] - ranges[4])
-      && (ranges[2] | (ranges[4] - ranges[2])) == ranges[4]
-      && is_powerof2(ranges[4] - ranges[2]))
-    {
-    if (readch)
-      read_char(common);
-    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[4] - ranges[2]);
-    OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[4]);
-    add_jump(compiler, backtracks, CMP(ranges[1] != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[5] - ranges[4]));
-    return TRUE;
-    }
-  return FALSE;
-
-  default:
-  return FALSE;
-  }
-}
-
-static void get_ctype_ranges(compiler_common *common, int flag, int *ranges)
-{
-int i, bit, length;
-const pcre_uint8 *ctypes = (const pcre_uint8*)common->ctypes;
-
-bit = ctypes[0] & flag;
-ranges[0] = -1;
-ranges[1] = bit != 0 ? 1 : 0;
-length = 0;
-
-for (i = 1; i < 256; i++)
-  if ((ctypes[i] & flag) != bit)
-    {
-    if (length >= MAX_RANGE_SIZE)
-      return;
-    ranges[2 + length] = i;
-    length++;
-    bit ^= flag;
-    }
-
-if (bit != 0)
-  {
-  if (length >= MAX_RANGE_SIZE)
-    return;
-  ranges[2 + length] = 256;
-  length++;
-  }
-ranges[0] = length;
-}
-
-static BOOL check_class_ranges(compiler_common *common, const pcre_uint8 *bits, BOOL nclass, jump_list **backtracks)
-{
-int ranges[2 + MAX_RANGE_SIZE];
+int ranges[MAX_RANGE_SIZE];
 pcre_uint8 bit, cbit, all;
 int i, byte, length = 0;
 
 bit = bits[0] & 0x1;
-ranges[1] = bit;
-/* Can be 0 or 255. */
+/* All bits will be zero or one (since bit is zero or one). */
 all = -bit;
 
 for (i = 0; i < 256; )
@@ -3617,7 +4223,7 @@ for (i = 0; i < 256; )
       {
       if (length >= MAX_RANGE_SIZE)
         return FALSE;
-      ranges[2 + length] = i;
+      ranges[length] = i;
       length++;
       bit = cbit;
       all = -cbit;
@@ -3630,12 +4236,117 @@ if (((bit == 0) && nclass) || ((bit == 1) && !nclass))
   {
   if (length >= MAX_RANGE_SIZE)
     return FALSE;
-  ranges[2 + length] = 256;
+  ranges[length] = 256;
   length++;
   }
-ranges[0] = length;
 
-return check_ranges(common, ranges, backtracks, FALSE);
+if (length < 0 || length > 4)
+  return FALSE;
+
+bit = bits[0] & 0x1;
+if (invert) bit ^= 0x1;
+
+/* No character is accepted. */
+if (length == 0 && bit == 0)
+  add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
+
+switch(length)
+  {
+  case 0:
+  /* When bit != 0, all characters are accepted. */
+  return TRUE;
+
+  case 1:
+  add_jump(compiler, backtracks, CMP(bit == 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+  return TRUE;
+
+  case 2:
+  if (ranges[0] + 1 != ranges[1])
+    {
+    OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
+    add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+    }
+  else
+    add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+  return TRUE;
+
+  case 3:
+  if (bit != 0)
+    {
+    add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
+    if (ranges[0] + 1 != ranges[1])
+      {
+      OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
+      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+      }
+    else
+      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+    return TRUE;
+    }
+
+  add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[0]));
+  if (ranges[1] + 1 != ranges[2])
+    {
+    OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[1]);
+    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
+    }
+  else
+    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1]));
+  return TRUE;
+
+  case 4:
+  if ((ranges[1] - ranges[0]) == (ranges[3] - ranges[2])
+      && (ranges[0] | (ranges[2] - ranges[0])) == ranges[2]
+      && is_powerof2(ranges[2] - ranges[0]))
+    {
+    OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[0]);
+    if (ranges[2] + 1 != ranges[3])
+      {
+      OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2]);
+      add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
+      }
+    else
+      add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
+    return TRUE;
+    }
+
+  if (bit != 0)
+    {
+    i = 0;
+    if (ranges[0] + 1 != ranges[1])
+      {
+      OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
+      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+      i = ranges[0];
+      }
+    else
+      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+
+    if (ranges[2] + 1 != ranges[3])
+      {
+      OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2] - i);
+      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
+      }
+    else
+      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2] - i));
+    return TRUE;
+    }
+
+  OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
+  add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[0]));
+  if (ranges[1] + 1 != ranges[2])
+    {
+    OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]);
+    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
+    }
+  else
+    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+  return TRUE;
+
+  default:
+  SLJIT_ASSERT_STOP();
+  return FALSE;
+  }
 }
 
 static void check_anynewline(compiler_common *common)
@@ -4002,20 +4713,20 @@ return cc;
 #define SET_TYPE_OFFSET(value) \
   if ((value) != typeoffset) \
     { \
-    if ((value) > typeoffset) \
-      OP2(SLJIT_SUB, typereg, 0, typereg, 0, SLJIT_IMM, (value) - typeoffset); \
-    else \
+    if ((value) < typeoffset) \
       OP2(SLJIT_ADD, typereg, 0, typereg, 0, SLJIT_IMM, typeoffset - (value)); \
+    else \
+      OP2(SLJIT_SUB, typereg, 0, typereg, 0, SLJIT_IMM, (value) - typeoffset); \
     } \
   typeoffset = (value);
 
 #define SET_CHAR_OFFSET(value) \
   if ((value) != charoffset) \
     { \
-    if ((value) > charoffset) \
-      OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, (value) - charoffset); \
+    if ((value) < charoffset) \
+      OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(charoffset - (value))); \
     else \
-      OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, charoffset - (value)); \
+      OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)((value) - charoffset)); \
     } \
   charoffset = (value);
 
@@ -4023,84 +4734,53 @@ static void compile_xclass_matchingpath(compiler_common *common, pcre_uchar *cc,
 {
 DEFINE_COMPILER;
 jump_list *found = NULL;
-jump_list **list = (*cc & XCL_NOT) == 0 ? &found : backtracks;
-pcre_int32 c, charoffset;
+jump_list **list = (cc[0] & XCL_NOT) == 0 ? &found : backtracks;
+sljit_uw c, charoffset, max = 256, min = READ_CHAR_MAX;
 struct sljit_jump *jump = NULL;
 pcre_uchar *ccbegin;
 int compares, invertcmp, numberofcmps;
+#if defined SUPPORT_UTF && (defined COMPILE_PCRE8 || defined COMPILE_PCRE16)
+BOOL utf = common->utf;
+#endif
 
 #ifdef SUPPORT_UCP
 BOOL needstype = FALSE, needsscript = FALSE, needschar = FALSE;
 BOOL charsaved = FALSE;
 int typereg = TMP1, scriptreg = TMP1;
 const pcre_uint32 *other_cases;
-pcre_int32 typeoffset;
+sljit_uw typeoffset;
 #endif
 
-/* Although SUPPORT_UTF must be defined, we are
-   not necessary in utf mode even in 8 bit mode. */
-detect_partial_match(common, backtracks);
-read_char(common);
-
-if ((*cc++ & XCL_MAP) != 0)
+/* Scanning the necessary info. */
+cc++;
+ccbegin = cc;
+compares = 0;
+if (cc[-1] & XCL_MAP)
   {
-  OP1(SLJIT_MOV, TMP3, 0, TMP1, 0);
-#ifndef COMPILE_PCRE8
-  jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
-#elif defined SUPPORT_UTF
-  if (common->utf)
-    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
-#endif
-
-  if (!check_class_ranges(common, (const pcre_uint8 *)cc, TRUE, list))
-    {
-    OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
-    OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
-    OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
-    OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
-    OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
-    add_jump(compiler, list, JUMP(SLJIT_C_NOT_ZERO));
-    }
-
-#ifndef COMPILE_PCRE8
-  JUMPHERE(jump);
-#elif defined SUPPORT_UTF
-  if (common->utf)
-    JUMPHERE(jump);
-#endif
-  OP1(SLJIT_MOV, TMP1, 0, TMP3, 0);
-#ifdef SUPPORT_UCP
-  charsaved = TRUE;
-#endif
+  min = 0;
   cc += 32 / sizeof(pcre_uchar);
   }
 
-/* Scanning the necessary info. */
-ccbegin = cc;
-compares = 0;
 while (*cc != XCL_END)
   {
   compares++;
   if (*cc == XCL_SINGLE)
     {
-    cc += 2;
-#ifdef SUPPORT_UTF
-    if (common->utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
-#endif
+    cc ++;
+    GETCHARINCTEST(c, cc);
+    if (c > max) max = c;
+    if (c < min) min = c;
 #ifdef SUPPORT_UCP
     needschar = TRUE;
 #endif
     }
   else if (*cc == XCL_RANGE)
     {
-    cc += 2;
-#ifdef SUPPORT_UTF
-    if (common->utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
-#endif
-    cc++;
-#ifdef SUPPORT_UTF
-    if (common->utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
-#endif
+    cc ++;
+    GETCHARINCTEST(c, cc);
+    if (c < min) min = c;
+    GETCHARINCTEST(c, cc);
+    if (c > max) max = c;
 #ifdef SUPPORT_UCP
     needschar = TRUE;
 #endif
@@ -4110,6 +4790,22 @@ while (*cc != XCL_END)
     {
     SLJIT_ASSERT(*cc == XCL_PROP || *cc == XCL_NOTPROP);
     cc++;
+    if (*cc == PT_CLIST)
+      {
+      other_cases = PRIV(ucd_caseless_sets) + cc[1];
+      while (*other_cases != NOTACHAR)
+        {
+        if (*other_cases > max) max = *other_cases;
+        if (*other_cases < min) min = *other_cases;
+        other_cases++;
+        }
+      }
+    else
+      {
+      max = READ_CHAR_MAX;
+      min = 0;
+      }
+
     switch(*cc)
       {
       case PT_ANY:
@@ -4150,6 +4846,64 @@ while (*cc != XCL_END)
 #endif
   }
 
+/* We are not necessary in utf mode even in 8 bit mode. */
+cc = ccbegin;
+detect_partial_match(common, backtracks);
+read_char_range(common, min, max, (cc[-1] & XCL_NOT) != 0);
+
+if ((cc[-1] & XCL_HASPROP) == 0)
+  {
+  if ((cc[-1] & XCL_MAP) != 0)
+    {
+    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+    if (!check_class_ranges(common, (const pcre_uint8 *)cc, (((const pcre_uint8 *)cc)[31] & 0x80) != 0, TRUE, &found))
+      {
+      OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
+      OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
+      OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
+      OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
+      OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
+      add_jump(compiler, &found, JUMP(SLJIT_C_NOT_ZERO));
+      }
+
+    add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
+    JUMPHERE(jump);
+
+    cc += 32 / sizeof(pcre_uchar);
+    }
+  else
+    {
+    OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, min);
+    add_jump(compiler, (cc[-1] & XCL_NOT) == 0 ? backtracks : &found, CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, max - min));
+    }
+  }
+else if ((cc[-1] & XCL_MAP) != 0)
+  {
+  OP1(SLJIT_MOV, TMP3, 0, TMP1, 0);
+#ifdef SUPPORT_UCP
+  charsaved = TRUE;
+#endif
+  if (!check_class_ranges(common, (const pcre_uint8 *)cc, FALSE, TRUE, list))
+    {
+#ifdef COMPILE_PCRE8
+    SLJIT_ASSERT(common->utf);
+#endif
+    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+
+    OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
+    OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
+    OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
+    OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
+    OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
+    add_jump(compiler, list, JUMP(SLJIT_C_NOT_ZERO));
+
+    JUMPHERE(jump);
+    }
+
+  OP1(SLJIT_MOV, TMP1, 0, TMP3, 0);
+  cc += 32 / sizeof(pcre_uchar);
+  }
+
 #ifdef SUPPORT_UCP
 /* Simple register allocation. TMP1 is preferred if possible. */
 if (needstype || needsscript)
@@ -4191,7 +4945,6 @@ if (needstype || needsscript)
 #endif
 
 /* Generating code. */
-cc = ccbegin;
 charoffset = 0;
 numberofcmps = 0;
 #ifdef SUPPORT_UCP
@@ -4207,70 +4960,50 @@ while (*cc != XCL_END)
   if (*cc == XCL_SINGLE)
     {
     cc ++;
-#ifdef SUPPORT_UTF
-    if (common->utf)
-      {
-      GETCHARINC(c, cc);
-      }
-    else
-#endif
-      c = *cc++;
+    GETCHARINCTEST(c, cc);
 
     if (numberofcmps < 3 && (*cc == XCL_SINGLE || *cc == XCL_RANGE))
       {
-      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, c - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_EQUAL);
       numberofcmps++;
       }
     else if (numberofcmps > 0)
       {
-      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, c - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
       jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
       numberofcmps = 0;
       }
     else
       {
-      jump = CMP(SLJIT_C_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, c - charoffset);
+      jump = CMP(SLJIT_C_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       numberofcmps = 0;
       }
     }
   else if (*cc == XCL_RANGE)
     {
     cc ++;
-#ifdef SUPPORT_UTF
-    if (common->utf)
-      {
-      GETCHARINC(c, cc);
-      }
-    else
-#endif
-      c = *cc++;
+    GETCHARINCTEST(c, cc);
     SET_CHAR_OFFSET(c);
-#ifdef SUPPORT_UTF
-    if (common->utf)
-      {
-      GETCHARINC(c, cc);
-      }
-    else
-#endif
-      c = *cc++;
+    GETCHARINCTEST(c, cc);
+
     if (numberofcmps < 3 && (*cc == XCL_SINGLE || *cc == XCL_RANGE))
       {
-      OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, c - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_LESS_EQUAL);
       numberofcmps++;
       }
     else if (numberofcmps > 0)
       {
-      OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, c - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
       jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
       numberofcmps = 0;
       }
     else
       {
-      jump = CMP(SLJIT_C_LESS_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, c - charoffset);
+      jump = CMP(SLJIT_C_LESS_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       numberofcmps = 0;
       }
     }
@@ -4336,7 +5069,7 @@ while (*cc != XCL_END)
       break;
 
       case PT_WORD:
-      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_UNDERSCORE - charoffset));
       OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
       /* Fall through. */
 
@@ -4384,35 +5117,35 @@ while (*cc != XCL_END)
         OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, other_cases[2]);
         OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
 
-        OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, other_cases[0] - charoffset);
+        OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(other_cases[0] - charoffset));
         OP_FLAGS(SLJIT_OR | ((other_cases[3] == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
 
         other_cases += 3;
         }
       else
         {
-        OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, *other_cases++ - charoffset);
+        OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(*other_cases++ - charoffset));
         OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
         }
 
       while (*other_cases != NOTACHAR)
         {
-        OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, *other_cases++ - charoffset);
+        OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(*other_cases++ - charoffset));
         OP_FLAGS(SLJIT_OR | ((*other_cases == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
         }
       jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
       break;
 
       case PT_UCNC:
-      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_DOLLAR_SIGN - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_DOLLAR_SIGN - charoffset));
       OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
-      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_COMMERCIAL_AT - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_COMMERCIAL_AT - charoffset));
       OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
-      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_GRAVE_ACCENT - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_GRAVE_ACCENT - charoffset));
       OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
 
       SET_CHAR_OFFSET(0xa0);
-      OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd7ff - charoffset);
+      OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(0xd7ff - charoffset));
       OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
       SET_CHAR_OFFSET(0);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xe000 - 0);
@@ -4511,7 +5244,7 @@ struct sljit_label *label;
 #ifdef SUPPORT_UCP
 pcre_uchar propdata[5];
 #endif
-#endif
+#endif /* SUPPORT_UTF */
 
 switch(type)
   {
@@ -4536,26 +5269,27 @@ switch(type)
   case OP_NOT_DIGIT:
   case OP_DIGIT:
   /* Digits are usually 0-9, so it is worth to optimize them. */
-  if (common->digits[0] == -2)
-    get_ctype_ranges(common, ctype_digit, common->digits);
   detect_partial_match(common, backtracks);
-  /* Flip the starting bit in the negative case. */
-  if (type == OP_NOT_DIGIT)
-    common->digits[1] ^= 1;
-  if (!check_ranges(common, common->digits, backtracks, TRUE))
-    {
-    read_char8_type(common);
-    OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_digit);
-    add_jump(compiler, backtracks, JUMP(type == OP_DIGIT ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
-    }
-  if (type == OP_NOT_DIGIT)
-    common->digits[1] ^= 1;
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+  if (common->utf && is_char7_bitset((const pcre_uint8*)common->ctypes - cbit_length + cbit_digit, FALSE))
+    read_char7_type(common, type == OP_NOT_DIGIT);
+  else
+#endif
+    read_char8_type(common, type == OP_NOT_DIGIT);
+    /* Flip the starting bit in the negative case. */
+  OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_digit);
+  add_jump(compiler, backtracks, JUMP(type == OP_DIGIT ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
   return cc;
 
   case OP_NOT_WHITESPACE:
   case OP_WHITESPACE:
   detect_partial_match(common, backtracks);
-  read_char8_type(common);
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+  if (common->utf && is_char7_bitset((const pcre_uint8*)common->ctypes - cbit_length + cbit_space, FALSE))
+    read_char7_type(common, type == OP_NOT_WHITESPACE);
+  else
+#endif
+    read_char8_type(common, type == OP_NOT_WHITESPACE);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_space);
   add_jump(compiler, backtracks, JUMP(type == OP_WHITESPACE ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
   return cc;
@@ -4563,14 +5297,19 @@ switch(type)
   case OP_NOT_WORDCHAR:
   case OP_WORDCHAR:
   detect_partial_match(common, backtracks);
-  read_char8_type(common);
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+  if (common->utf && is_char7_bitset((const pcre_uint8*)common->ctypes - cbit_length + cbit_word, FALSE))
+    read_char7_type(common, type == OP_NOT_WORDCHAR);
+  else
+#endif
+    read_char8_type(common, type == OP_NOT_WORDCHAR);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_word);
   add_jump(compiler, backtracks, JUMP(type == OP_WORDCHAR ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
   return cc;
 
   case OP_ANY:
   detect_partial_match(common, backtracks);
-  read_char(common);
+  read_char_range(common, common->nlmin, common->nlmax, TRUE);
   if (common->nltype == NLTYPE_FIXED && common->newline > 255)
     {
     jump[0] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
@@ -4626,7 +5365,7 @@ switch(type)
 #ifdef SUPPORT_UCP
   case OP_NOTPROP:
   case OP_PROP:
-  propdata[0] = 0;
+  propdata[0] = XCL_HASPROP;
   propdata[1] = type == OP_NOTPROP ? XCL_NOTPROP : XCL_PROP;
   propdata[2] = cc[0];
   propdata[3] = cc[1];
@@ -4638,7 +5377,7 @@ switch(type)
 
   case OP_ANYNL:
   detect_partial_match(common, backtracks);
-  read_char(common);
+  read_char_range(common, common->bsr_nlmin, common->bsr_nlmax, FALSE);
   jump[0] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
   /* We don't need to handle soft partial matching case. */
   end_list = NULL;
@@ -4660,7 +5399,7 @@ switch(type)
   case OP_NOT_HSPACE:
   case OP_HSPACE:
   detect_partial_match(common, backtracks);
-  read_char(common);
+  read_char_range(common, 0x9, 0x3000, type == OP_NOT_HSPACE);
   add_jump(compiler, &common->hspace, JUMP(SLJIT_FAST_CALL));
   add_jump(compiler, backtracks, JUMP(type == OP_NOT_HSPACE ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
   return cc;
@@ -4668,7 +5407,7 @@ switch(type)
   case OP_NOT_VSPACE:
   case OP_VSPACE:
   detect_partial_match(common, backtracks);
-  read_char(common);
+  read_char_range(common, 0xa, 0x2029, type == OP_NOT_VSPACE);
   add_jump(compiler, &common->vspace, JUMP(SLJIT_FAST_CALL));
   add_jump(compiler, backtracks, JUMP(type == OP_NOT_VSPACE ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
   return cc;
@@ -4767,7 +5506,7 @@ switch(type)
     else
       {
       OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_LOCALS_REG), LOCALS1, STR_PTR, 0);
-      read_char(common);
+      read_char_range(common, common->nlmin, common->nlmax, TRUE);
       add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, STR_END, 0));
       add_jump(compiler, &common->anynewline, JUMP(SLJIT_FAST_CALL));
       add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
@@ -4815,7 +5554,7 @@ switch(type)
   else
     {
     skip_char_back(common);
-    read_char(common);
+    read_char_range(common, common->nlmin, common->nlmax, TRUE);
     check_newlinechar(common, common->nltype, backtracks, FALSE);
     }
   JUMPHERE(jump[0]);
@@ -4866,7 +5605,7 @@ switch(type)
     }
   else
     {
-    peek_char(common);
+    peek_char(common, common->nlmax);
     check_newlinechar(common, common->nltype, backtracks, FALSE);
     }
   JUMPHERE(jump[0]);
@@ -4890,8 +5629,8 @@ switch(type)
 #endif
     return byte_sequence_compare(common, type == OP_CHARI, cc, &context, backtracks);
     }
+
   detect_partial_match(common, backtracks);
-  read_char(common);
 #ifdef SUPPORT_UTF
   if (common->utf)
     {
@@ -4900,12 +5639,15 @@ switch(type)
   else
 #endif
     c = *cc;
+
   if (type == OP_CHAR || !char_has_othercase(common, cc))
     {
+    read_char_range(common, c, c, FALSE);
     add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c));
     return cc + length;
     }
   oc = char_othercase(common, c);
+  read_char_range(common, c < oc ? c : oc, c > oc ? c : oc, FALSE);
   bit = c ^ oc;
   if (is_powerof2(bit))
     {
@@ -4913,11 +5655,9 @@ switch(type)
     add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
     return cc + length;
     }
-  OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, c);
-  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
-  OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, oc);
-  OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
-  add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
+  jump[0] = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c);
+  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
+  JUMPHERE(jump[0]);
   return cc + length;
 
   case OP_NOT:
@@ -4952,21 +5692,21 @@ switch(type)
 #endif /* COMPILE_PCRE8 */
       {
       GETCHARLEN(c, cc, length);
-      read_char(common);
       }
     }
   else
 #endif /* SUPPORT_UTF */
-    {
-    read_char(common);
     c = *cc;
-    }
 
   if (type == OP_NOT || !char_has_othercase(common, cc))
+    {
+    read_char_range(common, c, c, TRUE);
     add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
+    }
   else
     {
     oc = char_othercase(common, c);
+    read_char_range(common, c < oc ? c : oc, c > oc ? c : oc, TRUE);
     bit = c ^ oc;
     if (is_powerof2(bit))
       {
@@ -4984,36 +5724,49 @@ switch(type)
   case OP_CLASS:
   case OP_NCLASS:
   detect_partial_match(common, backtracks);
-  read_char(common);
-  if (check_class_ranges(common, (const pcre_uint8 *)cc, type == OP_NCLASS, backtracks))
+
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+  bit = (common->utf && is_char7_bitset((const pcre_uint8 *)cc, type == OP_NCLASS)) ? 127 : 255;
+  read_char_range(common, 0, bit, type == OP_NCLASS);
+#else
+  read_char_range(common, 0, 255, type == OP_NCLASS);
+#endif
+
+  if (check_class_ranges(common, (const pcre_uint8 *)cc, type == OP_NCLASS, FALSE, backtracks))
     return cc + 32 / sizeof(pcre_uchar);
 
-#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
   jump[0] = NULL;
-#ifdef COMPILE_PCRE8
-  /* This check only affects 8 bit mode. In other modes, we
-  always need to compare the value with 255. */
   if (common->utf)
-#endif /* COMPILE_PCRE8 */
     {
-    jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+    jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, bit);
     if (type == OP_CLASS)
       {
       add_jump(compiler, backtracks, jump[0]);
       jump[0] = NULL;
       }
     }
-#endif /* SUPPORT_UTF || !COMPILE_PCRE8 */
+#elif !defined COMPILE_PCRE8
+  jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+  if (type == OP_CLASS)
+    {
+    add_jump(compiler, backtracks, jump[0]);
+    jump[0] = NULL;
+    }
+#endif /* SUPPORT_UTF && COMPILE_PCRE8 */
+
   OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
   OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
   OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
   add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
+
 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
   if (jump[0] != NULL)
     JUMPHERE(jump[0]);
-#endif /* SUPPORT_UTF || !COMPILE_PCRE8 */
+#endif
+
   return cc + 32 / sizeof(pcre_uchar);
 
 #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
@@ -7347,7 +8100,7 @@ if (*cc == OP_FAIL)
   return cc + 1;
   }
 
-if (*cc == OP_ASSERT_ACCEPT || common->currententry != NULL)
+if (*cc == OP_ASSERT_ACCEPT || common->currententry != NULL || !common->might_be_empty)
   {
   /* No need to check notempty conditions. */
   if (common->accept_label == NULL)
@@ -8049,21 +8802,21 @@ if (bra == OP_BRAZERO)
 static void compile_bracket_backtrackingpath(compiler_common *common, struct backtrack_common *current)
 {
 DEFINE_COMPILER;
-int opcode, stacksize, count;
+int opcode, stacksize, alt_count, alt_max;
 int offset = 0;
 int private_data_ptr = CURRENT_AS(bracket_backtrack)->private_data_ptr;
 int repeat_ptr = 0, repeat_type = 0, repeat_count = 0;
 pcre_uchar *cc = current->cc;
 pcre_uchar *ccbegin;
 pcre_uchar *ccprev;
-jump_list *jumplist = NULL;
-jump_list *jumplistitem = NULL;
 pcre_uchar bra = OP_BRA;
 pcre_uchar ket;
 assert_backtrack *assert;
 BOOL has_alternatives;
 BOOL needs_control_head = FALSE;
 struct sljit_jump *brazero = NULL;
+struct sljit_jump *alt1 = NULL;
+struct sljit_jump *alt2 = NULL;
 struct sljit_jump *once = NULL;
 struct sljit_jump *cond = NULL;
 struct sljit_label *rmin_label = NULL;
@@ -8101,6 +8854,8 @@ if (SLJIT_UNLIKELY(opcode == OP_COND) && (*cc == OP_KETRMAX || *cc == OP_KETRMIN
 if (SLJIT_UNLIKELY(opcode == OP_ONCE_NC))
   opcode = OP_ONCE;
 
+alt_max = has_alternatives ? no_alternatives(ccbegin) : 0;
+
 /* Decoding the needs_control_head in framesize. */
 if (opcode == OP_ONCE)
   {
@@ -8214,44 +8969,27 @@ else if (SLJIT_UNLIKELY(opcode == OP_COND) || SLJIT_UNLIKELY(opcode == OP_SCOND)
     OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
     free_stack(common, 1);
 
-    jumplistitem = sljit_alloc_memory(compiler, sizeof(jump_list));
-    if (SLJIT_UNLIKELY(!jumplistitem))
-      return;
-    jumplist = jumplistitem;
-    jumplistitem->next = NULL;
-    jumplistitem->jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 1);
+    alt_max = 2;
+    alt1 = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
     }
   }
-else if (*cc == OP_ALT)
+else if (has_alternatives)
   {
-  /* Build a jump list. Get the last successfully matched branch index. */
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
   free_stack(common, 1);
-  count = 1;
-  do
-    {
-    /* Append as the last item. */
-    if (jumplist != NULL)
-      {
-      jumplistitem->next = sljit_alloc_memory(compiler, sizeof(jump_list));
-      jumplistitem = jumplistitem->next;
-      }
-    else
-      {
-      jumplistitem = sljit_alloc_memory(compiler, sizeof(jump_list));
-      jumplist = jumplistitem;
-      }
 
-    if (SLJIT_UNLIKELY(!jumplistitem))
-      return;
-
-    jumplistitem->next = NULL;
-    jumplistitem->jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, count++);
-    cc += GET(cc, 1);
+  if (alt_max > 4)
+    {
+    /* Table jump if alt_max is greater than 4. */
+    sljit_emit_ijump(compiler, SLJIT_JUMP, SLJIT_MEM1(TMP1), (sljit_sw)common->read_only_data_ptr);
+    add_label_addr(common);
+    }
+  else
+    {
+    if (alt_max == 4)
+      alt2 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
+    alt1 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
     }
-  while (*cc == OP_ALT);
-
-  cc = ccbegin + GET(ccbegin, 1);
   }
 
 COMPILE_BACKTRACKINGPATH(current->top);
@@ -8286,7 +9024,7 @@ if (SLJIT_UNLIKELY(opcode == OP_COND) || SLJIT_UNLIKELY(opcode == OP_SCOND))
 
 if (has_alternatives)
   {
-  count = 1;
+  alt_count = sizeof(sljit_uw);
   do
     {
     current->top = NULL;
@@ -8362,7 +9100,7 @@ if (has_alternatives)
       stacksize = match_capture_common(common, stacksize, offset, private_data_ptr);
 
     if (opcode != OP_ONCE)
-      OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(stacksize), SLJIT_IMM, count++);
+      OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(stacksize), SLJIT_IMM, alt_count);
 
     if (offset != 0 && ket == OP_KETRMAX && common->optimized_cbracket[offset >> 1] != 0)
       {
@@ -8375,9 +9113,24 @@ if (has_alternatives)
 
     if (opcode != OP_ONCE)
       {
-      SLJIT_ASSERT(jumplist);
-      JUMPHERE(jumplist->jump);
-      jumplist = jumplist->next;
+      if (alt_max > 4)
+        add_label_addr(common);
+      else
+        {
+        if (alt_count != 2 * sizeof(sljit_uw))
+          {
+          JUMPHERE(alt1);
+          if (alt_max == 3 && alt_count == sizeof(sljit_uw))
+            alt2 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
+          }
+        else
+          {
+          JUMPHERE(alt2);
+          if (alt_max == 4)
+            alt1 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 3 * sizeof(sljit_uw));
+          }
+        }
+      alt_count += sizeof(sljit_uw);
       }
 
     COMPILE_BACKTRACKINGPATH(current->top);
@@ -8386,7 +9139,6 @@ if (has_alternatives)
     SLJIT_ASSERT(!current->nextbacktracks);
     }
   while (*cc == OP_ALT);
-  SLJIT_ASSERT(!jumplist);
 
   if (cond != NULL)
     {
@@ -8987,16 +9739,18 @@ pcre_uchar *ccend;
 executable_functions *functions;
 void *executable_func;
 sljit_uw executable_size;
+sljit_uw total_length;
+label_addr_list *label_addr;
 struct sljit_label *mainloop_label = NULL;
 struct sljit_label *continue_match_label;
-struct sljit_label *empty_match_found_label;
-struct sljit_label *empty_match_backtrack_label;
+struct sljit_label *empty_match_found_label = NULL;
+struct sljit_label *empty_match_backtrack_label = NULL;
 struct sljit_label *reset_match_label;
+struct sljit_label *quit_label;
 struct sljit_jump *jump;
 struct sljit_jump *minlength_check_failed = NULL;
 struct sljit_jump *reqbyte_notfound = NULL;
-struct sljit_jump *empty_match;
-struct sljit_label *quit_label;
+struct sljit_jump *empty_match = NULL;
 
 SLJIT_ASSERT((extra->flags & PCRE_EXTRA_STUDY_DATA) != 0);
 study = extra->study_data;
@@ -9009,9 +9763,13 @@ memset(common, 0, sizeof(compiler_common));
 rootbacktrack.cc = (pcre_uchar *)re + re->name_table_offset + re->name_count * re->name_entry_size;
 
 common->start = rootbacktrack.cc;
+common->read_only_data = NULL;
+common->read_only_data_size = 0;
+common->read_only_data_ptr = NULL;
 common->fcc = tables + fcc_offset;
 common->lcc = (sljit_sw)(tables + lcc_offset);
 common->mode = mode;
+common->might_be_empty = study->minlength == 0;
 common->nltype = NLTYPE_FIXED;
 switch(re->options & PCRE_NEWLINE_BITS)
   {
@@ -9032,6 +9790,8 @@ switch(re->options & PCRE_NEWLINE_BITS)
   case PCRE_NEWLINE_ANYCRLF: common->newline = (CHAR_CR << 8) | CHAR_NL; common->nltype = NLTYPE_ANYCRLF; break;
   default: return;
   }
+common->nlmax = READ_CHAR_MAX;
+common->nlmin = 0;
 if ((re->options & PCRE_BSR_ANYCRLF) != 0)
   common->bsr_nltype = NLTYPE_ANYCRLF;
 else if ((re->options & PCRE_BSR_UNICODE) != 0)
@@ -9044,9 +9804,10 @@ else
   common->bsr_nltype = NLTYPE_ANY;
 #endif
   }
+common->bsr_nlmax = READ_CHAR_MAX;
+common->bsr_nlmin = 0;
 common->endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0;
 common->ctypes = (sljit_sw)(tables + ctypes_offset);
-common->digits[0] = -2;
 common->name_table = ((pcre_uchar *)re) + re->name_table_offset;
 common->name_count = re->name_count;
 common->name_entry_size = re->name_entry_size;
@@ -9057,8 +9818,31 @@ common->utf = (re->options & PCRE_UTF8) != 0;
 #ifdef SUPPORT_UCP
 common->use_ucp = (re->options & PCRE_UCP) != 0;
 #endif
+if (common->utf)
+  {
+  if (common->nltype == NLTYPE_ANY)
+    common->nlmax = 0x2029;
+  else if (common->nltype == NLTYPE_ANYCRLF)
+    common->nlmax = (CHAR_CR > CHAR_NL) ? CHAR_CR : CHAR_NL;
+  else
+    {
+    /* We only care about the first newline character. */
+    common->nlmax = common->newline & 0xff;
+    }
+
+  if (common->nltype == NLTYPE_FIXED)
+    common->nlmin = common->newline & 0xff;
+  else
+    common->nlmin = (CHAR_CR < CHAR_NL) ? CHAR_CR : CHAR_NL;
+
+  if (common->bsr_nltype == NLTYPE_ANY)
+    common->bsr_nlmax = 0x2029;
+  else
+    common->bsr_nlmax = (CHAR_CR > CHAR_NL) ? CHAR_CR : CHAR_NL;
+  common->bsr_nlmin = (CHAR_CR < CHAR_NL) ? CHAR_CR : CHAR_NL;
+  }
 #endif /* SUPPORT_UTF */
-ccend = bracketend(rootbacktrack.cc);
+ccend = bracketend(common->start);
 
 /* Calculate the local space size on the stack. */
 common->ovector_start = LIMIT_MATCH + sizeof(sljit_sw);
@@ -9071,12 +9855,12 @@ memset(common->optimized_cbracket, 0, re->top_bracket + 1);
 memset(common->optimized_cbracket, 1, re->top_bracket + 1);
 #endif
 
-SLJIT_ASSERT(*rootbacktrack.cc == OP_BRA && ccend[-(1 + LINK_SIZE)] == OP_KET);
+SLJIT_ASSERT(*common->start == OP_BRA && ccend[-(1 + LINK_SIZE)] == OP_KET);
 #if defined DEBUG_FORCE_UNOPTIMIZED_CBRAS && DEBUG_FORCE_UNOPTIMIZED_CBRAS == 2
 common->capture_last_ptr = common->ovector_start;
 common->ovector_start += sizeof(sljit_sw);
 #endif
-if (!check_opcode_types(common, rootbacktrack.cc, ccend))
+if (!check_opcode_types(common, common->start, ccend))
   {
   SLJIT_FREE(common->optimized_cbracket);
   return;
@@ -9139,13 +9923,14 @@ if (common->capture_last_ptr != 0)
 SLJIT_ASSERT(!(common->req_char_ptr != 0 && common->start_used_ptr != 0));
 common->cbra_ptr = OVECTOR_START + (re->top_bracket + 1) * 2 * sizeof(sljit_sw);
 
-common->private_data_ptrs = (int *)SLJIT_MALLOC((ccend - rootbacktrack.cc) * sizeof(sljit_si));
+total_length = ccend - common->start;
+common->private_data_ptrs = (sljit_si *)SLJIT_MALLOC(total_length * (sizeof(sljit_si) + (common->has_then ? 1 : 0)));
 if (!common->private_data_ptrs)
   {
   SLJIT_FREE(common->optimized_cbracket);
   return;
   }
-memset(common->private_data_ptrs, 0, (ccend - rootbacktrack.cc) * sizeof(int));
+memset(common->private_data_ptrs, 0, total_length * sizeof(sljit_si));
 
 private_data_size = common->cbra_ptr + (re->top_bracket + 1) * sizeof(sljit_sw);
 set_private_data_ptrs(common, &private_data_size, ccend);
@@ -9158,15 +9943,21 @@ if (private_data_size > SLJIT_MAX_LOCAL_SIZE)
 
 if (common->has_then)
   {
-  common->then_offsets = (pcre_uint8 *)SLJIT_MALLOC(ccend - rootbacktrack.cc);
-  if (!common->then_offsets)
+  common->then_offsets = (pcre_uint8 *)(common->private_data_ptrs + total_length);
+  memset(common->then_offsets, 0, total_length);
+  set_then_offsets(common, common->start, NULL);
+  }
+
+if (common->read_only_data_size > 0)
+  {
+  common->read_only_data = (sljit_uw *)SLJIT_MALLOC(common->read_only_data_size);
+  if (common->read_only_data == NULL)
     {
     SLJIT_FREE(common->optimized_cbracket);
     SLJIT_FREE(common->private_data_ptrs);
     return;
     }
-  memset(common->then_offsets, 0, ccend - rootbacktrack.cc);
-  set_then_offsets(common, rootbacktrack.cc, NULL);
+  common->read_only_data_ptr = common->read_only_data;
   }
 
 compiler = sljit_create_compiler();
@@ -9174,8 +9965,8 @@ if (!compiler)
   {
   SLJIT_FREE(common->optimized_cbracket);
   SLJIT_FREE(common->private_data_ptrs);
-  if (common->has_then)
-    SLJIT_FREE(common->then_offsets);
+  if (common->read_only_data)
+    SLJIT_FREE(common->read_only_data);
   return;
   }
 common->compiler = compiler;
@@ -9214,13 +10005,22 @@ if ((re->options & PCRE_ANCHORED) == 0)
   if ((re->options & PCRE_NO_START_OPTIMIZE) == 0)
     {
     if (mode == JIT_COMPILE && fast_forward_first_n_chars(common, (re->options & PCRE_FIRSTLINE) != 0))
-      { /* Do nothing */ }
+      {
+      /* If read_only_data is reallocated, we might have an allocation failure. */
+      if (common->read_only_data_size > 0 && common->read_only_data == NULL)
+        {
+        sljit_free_compiler(compiler);
+        SLJIT_FREE(common->optimized_cbracket);
+        SLJIT_FREE(common->private_data_ptrs);
+        return;
+        }
+      }
     else if ((re->flags & PCRE_FIRSTSET) != 0)
       fast_forward_first_char(common, (pcre_uchar)re->first_char, (re->flags & PCRE_FCH_CASELESS) != 0, (re->options & PCRE_FIRSTLINE) != 0);
     else if ((re->flags & PCRE_STARTLINE) != 0)
       fast_forward_newline(common, (re->options & PCRE_FIRSTLINE) != 0);
     else if ((re->flags & PCRE_STARTLINE) == 0 && study != NULL && (study->flags & PCRE_STUDY_MAPPED) != 0)
-      fast_forward_start_bits(common, (sljit_uw)study->start_bits, (re->options & PCRE_FIRSTLINE) != 0);
+      fast_forward_start_bits(common, study->start_bits, (re->options & PCRE_FIRSTLINE) != 0);
     }
   }
 else
@@ -9261,19 +10061,22 @@ if (mode == JIT_PARTIAL_SOFT_COMPILE)
 else if (mode == JIT_PARTIAL_HARD_COMPILE)
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_LOCALS_REG), common->start_used_ptr, STR_PTR, 0);
 
-compile_matchingpath(common, rootbacktrack.cc, ccend, &rootbacktrack);
+compile_matchingpath(common, common->start, ccend, &rootbacktrack);
 if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
   {
   sljit_free_compiler(compiler);
   SLJIT_FREE(common->optimized_cbracket);
   SLJIT_FREE(common->private_data_ptrs);
-  if (common->has_then)
-    SLJIT_FREE(common->then_offsets);
+  if (common->read_only_data)
+    SLJIT_FREE(common->read_only_data);
   return;
   }
 
-empty_match = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), OVECTOR(0));
-empty_match_found_label = LABEL();
+if (common->might_be_empty)
+  {
+  empty_match = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), OVECTOR(0));
+  empty_match_found_label = LABEL();
+  }
 
 common->accept_label = LABEL();
 if (common->accept != NULL)
@@ -9297,15 +10100,16 @@ if (mode != JIT_COMPILE)
   return_with_partial_match(common, common->quit_label);
   }
 
-empty_match_backtrack_label = LABEL();
+if (common->might_be_empty)
+  empty_match_backtrack_label = LABEL();
 compile_backtrackingpath(common, rootbacktrack.top);
 if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
   {
   sljit_free_compiler(compiler);
   SLJIT_FREE(common->optimized_cbracket);
   SLJIT_FREE(common->private_data_ptrs);
-  if (common->has_then)
-    SLJIT_FREE(common->then_offsets);
+  if (common->read_only_data)
+    SLJIT_FREE(common->read_only_data);
   return;
   }
 
@@ -9333,10 +10137,19 @@ OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), common->start_ptr);
 
 if ((re->options & PCRE_ANCHORED) == 0)
   {
-  if ((re->options & PCRE_FIRSTLINE) == 0)
-    CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop_label);
+  if (common->ff_newline_shortcut != NULL)
+    {
+    if ((re->options & PCRE_FIRSTLINE) == 0)
+      CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, common->ff_newline_shortcut);
+    /* There cannot be more newlines here. */
+    }
   else
-    CMPTO(SLJIT_C_LESS, STR_PTR, 0, TMP1, 0, mainloop_label);
+    {
+    if ((re->options & PCRE_FIRSTLINE) == 0)
+      CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop_label);
+    else
+      CMPTO(SLJIT_C_LESS, STR_PTR, 0, TMP1, 0, mainloop_label);
+    }
   }
 
 /* No more remaining characters. */
@@ -9351,15 +10164,18 @@ JUMPTO(SLJIT_JUMP, common->quit_label);
 
 flush_stubs(common);
 
-JUMPHERE(empty_match);
-OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
-OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty));
-CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_backtrack_label);
-OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty_atstart));
-CMPTO(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_found_label);
-OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
-CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, empty_match_found_label);
-JUMPTO(SLJIT_JUMP, empty_match_backtrack_label);
+if (common->might_be_empty)
+  {
+  JUMPHERE(empty_match);
+  OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
+  OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty));
+  CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_backtrack_label);
+  OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty_atstart));
+  CMPTO(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_found_label);
+  OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
+  CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, empty_match_found_label);
+  JUMPTO(SLJIT_JUMP, empty_match_backtrack_label);
+  }
 
 common->currententry = common->entries;
 common->local_exit = TRUE;
@@ -9373,8 +10189,8 @@ while (common->currententry != NULL)
     sljit_free_compiler(compiler);
     SLJIT_FREE(common->optimized_cbracket);
     SLJIT_FREE(common->private_data_ptrs);
-    if (common->has_then)
-      SLJIT_FREE(common->then_offsets);
+    if (common->read_only_data)
+      SLJIT_FREE(common->read_only_data);
     return;
     }
   flush_stubs(common);
@@ -9458,14 +10274,17 @@ if (common->reset_match != NULL)
   JUMPTO(SLJIT_JUMP, reset_match_label);
   }
 #ifdef SUPPORT_UTF
-#ifndef COMPILE_PCRE32
+#ifdef COMPILE_PCRE8
 if (common->utfreadchar != NULL)
   {
   set_jumps(common->utfreadchar, LABEL());
   do_utfreadchar(common);
   }
-#endif /* !COMPILE_PCRE32 */
-#ifdef COMPILE_PCRE8
+if (common->utfreadchar16 != NULL)
+  {
+  set_jumps(common->utfreadchar16, LABEL());
+  do_utfreadchar16(common);
+  }
 if (common->utfreadtype8 != NULL)
   {
   set_jumps(common->utfreadtype8, LABEL());
@@ -9481,16 +10300,25 @@ if (common->getucd != NULL)
   }
 #endif
 
+SLJIT_ASSERT(common->read_only_data + (common->read_only_data_size >> SLJIT_WORD_SHIFT) == common->read_only_data_ptr);
 SLJIT_FREE(common->optimized_cbracket);
 SLJIT_FREE(common->private_data_ptrs);
-if (common->has_then)
-  SLJIT_FREE(common->then_offsets);
 
 executable_func = sljit_generate_code(compiler);
 executable_size = sljit_get_generated_code_size(compiler);
+label_addr = common->label_addrs;
+while (label_addr != NULL)
+  {
+  *label_addr->addr = sljit_get_label_addr(label_addr->label);
+  label_addr = label_addr->next;
+  }
 sljit_free_compiler(compiler);
 if (executable_func == NULL)
+  {
+  if (common->read_only_data)
+    SLJIT_FREE(common->read_only_data);
   return;
+  }
 
 /* Reuse the function descriptor if possible. */
 if ((extra->flags & PCRE_EXTRA_EXECUTABLE_JIT) != 0 && extra->executable_jit != NULL)
@@ -9510,8 +10338,10 @@ else
   if (functions == NULL)
     {
     /* This case is highly unlikely since we just recently
-    freed a lot of memory. Although not impossible. */
+    freed a lot of memory. Not impossible though. */
     sljit_free_code(executable_func);
+    if (common->read_only_data)
+      SLJIT_FREE(common->read_only_data);
     return;
     }
   memset(functions, 0, sizeof(executable_functions));
@@ -9522,6 +10352,7 @@ else
   }
 
 functions->executable_funcs[mode] = executable_func;
+functions->read_only_data[mode] = common->read_only_data;
 functions->executable_sizes[mode] = executable_size;
 }
 
@@ -9708,6 +10539,8 @@ for (i = 0; i < JIT_NUMBER_OF_COMPILE_MODES; i++)
   {
   if (functions->executable_funcs[i] != NULL)
     sljit_free_code(functions->executable_funcs[i]);
+  if (functions->read_only_data[i] != NULL)
+    SLJIT_FREE(functions->read_only_data[i]);
   }
 SLJIT_FREE(functions);
 }
diff --git a/src/3rdparty/pcre/pcre_string_utils.c b/src/3rdparty/pcre/pcre_string_utils.c
index 2601ce385a..36f9b7b864 100644
--- a/src/3rdparty/pcre/pcre_string_utils.c
+++ b/src/3rdparty/pcre/pcre_string_utils.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2013 University of Cambridge
+           Copyright (c) 1997-2014 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -91,8 +91,8 @@ pcre_uchar c2;
 
 while (*str1 != '\0' || *str2 != '\0')
   {
-  c1 = RAWUCHARINC(str1);
-  c2 = RAWUCHARINC(str2);
+  c1 = UCHAR21INC(str1);
+  c2 = UCHAR21INC(str2);
   if (c1 != c2)
     return ((c1 > c2) << 1) - 1;
   }
@@ -131,7 +131,7 @@ pcre_uchar c2;
 
 while (*str1 != '\0' || *ustr2 != '\0')
   {
-  c1 = RAWUCHARINC(str1);
+  c1 = UCHAR21INC(str1);
   c2 = (pcre_uchar)*ustr2++;
   if (c1 != c2)
     return ((c1 > c2) << 1) - 1;
diff --git a/src/3rdparty/pcre/pcre_study.c b/src/3rdparty/pcre/pcre_study.c
index 0478a00c1a..feb74115c6 100644
--- a/src/3rdparty/pcre/pcre_study.c
+++ b/src/3rdparty/pcre/pcre_study.c
@@ -879,9 +879,6 @@ do
       case OP_SOM:
       case OP_THEN:
       case OP_THEN_ARG:
-#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
-      case OP_XCLASS:
-#endif
       return SSB_FAIL;
 
       /* We can ignore word boundary tests. */
@@ -1257,6 +1254,16 @@ do
       with a value >= 0xc4 is a potentially valid starter because it starts a
       character with a value > 255. */
 
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+      case OP_XCLASS:
+      if ((tcode[1 + LINK_SIZE] & XCL_HASPROP) != 0)
+        return SSB_FAIL;
+      /* All bits are set. */
+      if ((tcode[1 + LINK_SIZE] & XCL_MAP) == 0 && (tcode[1 + LINK_SIZE] & XCL_NOT) != 0)
+        return SSB_FAIL;
+#endif
+      /* Fall through */
+
       case OP_NCLASS:
 #if defined SUPPORT_UTF && defined COMPILE_PCRE8
       if (utf)
@@ -1273,8 +1280,21 @@ do
       case OP_CLASS:
         {
         pcre_uint8 *map;
-        tcode++;
-        map = (pcre_uint8 *)tcode;
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+        map = NULL;
+        if (*tcode == OP_XCLASS)
+          {
+          if ((tcode[1 + LINK_SIZE] & XCL_MAP) != 0)
+            map = (pcre_uint8 *)(tcode + 1 + LINK_SIZE + 1);
+          tcode += GET(tcode, 1);
+          }
+        else
+#endif
+          {
+          tcode++;
+          map = (pcre_uint8 *)tcode;
+          tcode += 32 / sizeof(pcre_uchar);
+          }
 
         /* In UTF-8 mode, the bits in a bit map correspond to character
         values, not to byte values. However, the bit map we are constructing is
@@ -1282,31 +1302,35 @@ do
         value is > 127. In fact, there are only two possible starting bytes for
         characters in the range 128 - 255. */
 
-#if defined SUPPORT_UTF && defined COMPILE_PCRE8
-        if (utf)
+#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
+        if (map != NULL)
+#endif
           {
-          for (c = 0; c < 16; c++) start_bits[c] |= map[c];
-          for (c = 128; c < 256; c++)
+#if defined SUPPORT_UTF && defined COMPILE_PCRE8
+          if (utf)
             {
-            if ((map[c/8] && (1 << (c&7))) != 0)
+            for (c = 0; c < 16; c++) start_bits[c] |= map[c];
+            for (c = 128; c < 256; c++)
               {
-              int d = (c >> 6) | 0xc0;            /* Set bit for this starter */
-              start_bits[d/8] |= (1 << (d&7));    /* and then skip on to the */
-              c = (c & 0xc0) + 0x40 - 1;          /* next relevant character. */
+              if ((map[c/8] && (1 << (c&7))) != 0)
+                {
+                int d = (c >> 6) | 0xc0;            /* Set bit for this starter */
+                start_bits[d/8] |= (1 << (d&7));    /* and then skip on to the */
+                c = (c & 0xc0) + 0x40 - 1;          /* next relevant character. */
+                }
               }
             }
-          }
-        else
+          else
 #endif
-          {
-          /* In non-UTF-8 mode, the two bit maps are completely compatible. */
-          for (c = 0; c < 32; c++) start_bits[c] |= map[c];
+            {
+            /* In non-UTF-8 mode, the two bit maps are completely compatible. */
+            for (c = 0; c < 32; c++) start_bits[c] |= map[c];
+            }
           }
 
         /* Advance past the bit map, and act on what follows. For a zero
         minimum repeat, continue; otherwise stop processing. */
 
-        tcode += 32 / sizeof(pcre_uchar);
         switch (*tcode)
           {
           case OP_CRSTAR:
diff --git a/src/3rdparty/pcre/pcre_xclass.c b/src/3rdparty/pcre/pcre_xclass.c
index dce8580a3d..036b6e734a 100644
--- a/src/3rdparty/pcre/pcre_xclass.c
+++ b/src/3rdparty/pcre/pcre_xclass.c
@@ -81,6 +81,11 @@ additional data. */
 
 if (c < 256)
   {
+  if ((*data & XCL_HASPROP) == 0)
+    {
+    if ((*data & XCL_MAP) == 0) return negated;
+    return (((pcre_uint8 *)(data + 1))[c/8] & (1 << (c&7))) != 0;
+    }
   if ((*data & XCL_MAP) != 0 &&
     (((pcre_uint8 *)(data + 1))[c/8] & (1 << (c&7))) != 0)
     return !negated; /* char found */
diff --git a/src/3rdparty/pcre/sljit/sljitConfig.h b/src/3rdparty/pcre/sljit/sljitConfig.h
index 4f0fe4463a..4d93f4f78c 100644
--- a/src/3rdparty/pcre/sljit/sljitConfig.h
+++ b/src/3rdparty/pcre/sljit/sljitConfig.h
@@ -44,9 +44,11 @@
 /* #define SLJIT_CONFIG_ARM_V5 1 */
 /* #define SLJIT_CONFIG_ARM_V7 1 */
 /* #define SLJIT_CONFIG_ARM_THUMB2 1 */
+/* #define SLJIT_CONFIG_ARM_64 1 */
 /* #define SLJIT_CONFIG_PPC_32 1 */
 /* #define SLJIT_CONFIG_PPC_64 1 */
 /* #define SLJIT_CONFIG_MIPS_32 1 */
+/* #define SLJIT_CONFIG_MIPS_64 1 */
 /* #define SLJIT_CONFIG_SPARC_32 1 */
 /* #define SLJIT_CONFIG_TILEGX 1 */
 
@@ -106,6 +108,13 @@
 #define SLJIT_VERBOSE 1
 #endif
 
-/* See the beginning of sljitConfigInternal.h */
+/*
+  SLJIT_IS_FPU_AVAILABLE
+    The availability of the FPU can be controlled by SLJIT_IS_FPU_AVAILABLE.
+      zero value - FPU is NOT present.
+      nonzero value - FPU is present.
+*/
+
+/* For further configurations, see the beginning of sljitConfigInternal.h */
 
 #endif
diff --git a/src/3rdparty/pcre/sljit/sljitConfigInternal.h b/src/3rdparty/pcre/sljit/sljitConfigInternal.h
index af455df063..89be38bd46 100644
--- a/src/3rdparty/pcre/sljit/sljitConfigInternal.h
+++ b/src/3rdparty/pcre/sljit/sljitConfigInternal.h
@@ -59,9 +59,11 @@
 	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
 	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
 	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
 	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
 	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
 	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
 	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
 	|| (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \
 	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
@@ -75,10 +77,12 @@
 	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
 	+ (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
 	+ (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	+ (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
 	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
 	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
 	+ (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \
 	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	+ (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
 	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
 	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
 	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2
@@ -102,12 +106,16 @@
 #else
 #define SLJIT_CONFIG_ARM_V5 1
 #endif
+#elif defined (__aarch64__)
+#define SLJIT_CONFIG_ARM_64 1
 #elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__))
 #define SLJIT_CONFIG_PPC_64 1
 #elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER)
 #define SLJIT_CONFIG_PPC_32 1
 #elif defined(__mips__) && !defined(_LP64)
 #define SLJIT_CONFIG_MIPS_32 1
+#elif defined(__mips64)
+#define SLJIT_CONFIG_MIPS_64 1
 #elif defined(__sparc__) || defined(__sparc)
 #define SLJIT_CONFIG_SPARC_32 1
 #elif defined(__tilegx__)
@@ -275,7 +283,9 @@ typedef signed int sljit_si;
 typedef unsigned long int sljit_uw;
 typedef long int sljit_sw;
 #elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+	&& !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
 	&& !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
+	&& !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
 	&& !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
 #define SLJIT_32BIT_ARCHITECTURE 1
 #define SLJIT_WORD_SHIFT 2
@@ -353,13 +363,18 @@ typedef double sljit_d;
 
 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
 
-/* These macros are useful for the application. */
+/* These macros are useful for the applications. */
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+
+#ifdef __LITTLE_ENDIAN__
+#define SLJIT_LITTLE_ENDIAN 1
+#else
 #define SLJIT_BIG_ENDIAN 1
+#endif
 
-#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
 
 #ifdef __MIPSEL__
 #define SLJIT_LITTLE_ENDIAN 1
@@ -367,6 +382,10 @@ typedef double sljit_d;
 #define SLJIT_BIG_ENDIAN 1
 #endif
 
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+
+#define SLJIT_BIG_ENDIAN 1
+
 #else
 #define SLJIT_LITTLE_ENDIAN 1
 #endif
@@ -383,7 +402,8 @@ typedef double sljit_d;
 #endif
 
 #ifndef SLJIT_INDIRECT_CALL
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32 && defined _AIX)
+#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
+	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
 /* It seems certain ppc compilers use an indirect addressing for functions
    which makes things complicated. */
 #define SLJIT_INDIRECT_CALL 1
@@ -420,6 +440,7 @@ typedef double sljit_d;
 	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
 	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
 	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
 	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
 	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 #define SLJIT_UNALIGNED 1
diff --git a/src/3rdparty/pcre/sljit/sljitLir.c b/src/3rdparty/pcre/sljit/sljitLir.c
index 53d208a69d..1acecba8b4 100644
--- a/src/3rdparty/pcre/sljit/sljitLir.c
+++ b/src/3rdparty/pcre/sljit/sljitLir.c
@@ -83,13 +83,13 @@
 #if !(defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
 
 #define GET_OPCODE(op) \
-	((op) & ~(SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))
+	((op) & ~(SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))
 
 #define GET_FLAGS(op) \
-	((op) & (SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C))
+	((op) & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C))
 
 #define GET_ALL_FLAGS(op) \
-	((op) & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))
+	((op) & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))
 
 #define TYPE_CAST_NEEDED(op) \
 	(((op) >= SLJIT_MOV_UB && (op) <= SLJIT_MOV_SH) || ((op) >= SLJIT_MOVU_UB && (op) <= SLJIT_MOVU_SH))
@@ -102,6 +102,16 @@
 #define ABUF_SIZE	4096
 #endif
 
+/* Parameter parsing. */
+#define REG_MASK		0x3f
+#define OFFS_REG(reg)		(((reg) >> 8) & REG_MASK)
+#define OFFS_REG_MASK		(REG_MASK << 8)
+#define TO_OFFS_REG(reg)	((reg) << 8)
+/* When reg cannot be unused. */
+#define FAST_IS_REG(reg)	((reg) <= REG_MASK)
+/* When reg can be unused. */
+#define SLOW_IS_REG(reg)	((reg) > 0 && (reg) <= REG_MASK)
+
 /* Jump flags. */
 #define JUMP_LABEL	0x1
 #define JUMP_ADDR	0x2
@@ -127,39 +137,59 @@
 #if (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
 #	define IS_COND		0x04
 #	define IS_BL		0x08
-	/* cannot be encoded as branch */
-#	define B_TYPE0		0x00
 	/* conditional + imm8 */
-#	define B_TYPE1		0x10
+#	define PATCH_TYPE1	0x10
 	/* conditional + imm20 */
-#	define B_TYPE2		0x20
+#	define PATCH_TYPE2	0x20
 	/* IT + imm24 */
-#	define B_TYPE3		0x30
+#	define PATCH_TYPE3	0x30
 	/* imm11 */
-#	define B_TYPE4		0x40
+#	define PATCH_TYPE4	0x40
 	/* imm24 */
-#	define B_TYPE5		0x50
+#	define PATCH_TYPE5	0x50
 	/* BL + imm24 */
-#	define BL_TYPE6	0x60
+#	define PATCH_BL		0x60
 	/* 0xf00 cc code for branches */
 #endif
 
+#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+#	define IS_COND		0x004
+#	define IS_CBZ		0x008
+#	define IS_BL		0x010
+#	define PATCH_B		0x020
+#	define PATCH_COND	0x040
+#	define PATCH_ABS48	0x080
+#	define PATCH_ABS64	0x100
+#endif
+
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#	define UNCOND_B	0x04
-#	define PATCH_B		0x08
-#	define ABSOLUTE_B	0x10
+#	define IS_COND		0x004
+#	define IS_CALL		0x008
+#	define PATCH_B		0x010
+#	define PATCH_ABS_B	0x020
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#	define PATCH_ABS32	0x040
+#	define PATCH_ABS48	0x080
+#endif
+#	define REMOVE_COND	0x100
 #endif
 
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
-#	define IS_MOVABLE	0x04
-#	define IS_JAL		0x08
-#	define IS_BIT26_COND	0x10
-#	define IS_BIT16_COND	0x20
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+#	define IS_MOVABLE	0x004
+#	define IS_JAL		0x008
+#	define IS_CALL		0x010
+#	define IS_BIT26_COND	0x020
+#	define IS_BIT16_COND	0x040
 
 #	define IS_COND		(IS_BIT26_COND | IS_BIT16_COND)
 
-#	define PATCH_B		0x40
-#	define PATCH_J		0x80
+#	define PATCH_B		0x080
+#	define PATCH_J		0x100
+
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+#	define PATCH_ABS32	0x200
+#	define PATCH_ABS48	0x400
+#endif
 
 	/* instruction types */
 #	define MOVABLE_INS	0
@@ -167,15 +197,15 @@
 	/* no destination (i.e: store) */
 #	define UNMOVABLE_INS	32
 	/* FPU status register */
-#	define FCSR_FCC	33
+#	define FCSR_FCC		33
 #endif
 
 #if (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
-#	define IS_JAL           0x04
-#	define IS_COND          0x08
+#	define IS_JAL		0x04
+#	define IS_COND		0x08
 
-#	define PATCH_B          0x10
-#	define PATCH_J          0x20
+#	define PATCH_B		0x10
+#	define PATCH_J		0x20
 #endif
 
 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
@@ -215,9 +245,13 @@
 #endif
 #endif
 
+#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+#define SLJIT_HAS_VARIABLE_LOCALS_OFFSET 1
+#endif
+
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
 #define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#if (defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
+#ifdef _AIX
 #define FIXED_LOCALS_OFFSET ((6 + 8) * sizeof(sljit_sw))
 #else
 #define FIXED_LOCALS_OFFSET (2 * sizeof(sljit_sw))
@@ -234,6 +268,11 @@
 #define FIXED_LOCALS_OFFSET (4 * sizeof(sljit_sw))
 #endif
 
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
+#define FIXED_LOCALS_OFFSET 0
+#endif
+
 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
 #define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
 #define FIXED_LOCALS_OFFSET (23 * sizeof(sljit_sw))
@@ -343,7 +382,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void)
 	compiler->cpool_diff = 0xffffffff;
 #endif
 
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
 	compiler->delay_slot = UNMOVABLE_INS;
 #endif
 
@@ -418,8 +457,6 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_set_label(struct sljit_jump *jump, struct sl
 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_target(struct sljit_jump *jump, sljit_uw target)
 {
 	if (SLJIT_LIKELY(!!jump)) {
-		SLJIT_ASSERT(jump->flags & SLJIT_REWRITABLE_JUMP);
-
 		jump->flags &= ~JUMP_LABEL;
 		jump->flags |= JUMP_ADDR;
 		jump->u.target = target;
@@ -534,7 +571,7 @@ static SLJIT_INLINE void set_const(struct sljit_const *const_, struct sljit_comp
 }
 
 #define ADDRESSING_DEPENDS_ON(exp, reg) \
-	(((exp) & SLJIT_MEM) && (((exp) & 0xf) == reg || (((exp) >> 4) & 0xf) == reg))
+	(((exp) & SLJIT_MEM) && (((exp) & REG_MASK) == reg || OFFS_REG(exp) == reg))
 
 #if (defined SLJIT_DEBUG && SLJIT_DEBUG)
 #define FUNCTION_CHECK_OP() \
@@ -548,41 +585,43 @@ static SLJIT_INLINE void set_const(struct sljit_const *const_, struct sljit_comp
 	case SLJIT_SHL: \
 	case SLJIT_LSHR: \
 	case SLJIT_ASHR: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C))); \
+		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C))); \
 		break; \
 	case SLJIT_NEG: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_C))); \
+		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
 		break; \
 	case SLJIT_MUL: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_C))); \
+		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
 		break; \
 	case SLJIT_CMPD: \
 		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
 		SLJIT_ASSERT((op & (SLJIT_SET_E | SLJIT_SET_S))); \
 		break; \
 	case SLJIT_ADD: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_S | SLJIT_SET_U))); \
+		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S))); \
 		break; \
 	case SLJIT_SUB: \
 		break; \
 	case SLJIT_ADDC: \
 	case SLJIT_SUBC: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O))); \
+		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O))); \
 		break; \
 	case SLJIT_BREAKPOINT: \
 	case SLJIT_NOP: \
 	case SLJIT_UMUL: \
 	case SLJIT_SMUL: \
 	case SLJIT_MOV: \
+	case SLJIT_MOV_UI: \
 	case SLJIT_MOV_P: \
 	case SLJIT_MOVU: \
+	case SLJIT_MOVU_UI: \
 	case SLJIT_MOVU_P: \
 		/* Nothing allowed */ \
-		SLJIT_ASSERT(!(op & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+		SLJIT_ASSERT(!(op & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
 		break; \
 	default: \
 		/* Only SLJIT_INT_OP or SLJIT_SINGLE_OP is allowed. */ \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
 		break; \
 	}
 
@@ -600,12 +639,12 @@ static SLJIT_INLINE void set_const(struct sljit_const *const_, struct sljit_comp
 	else if ((p) == (SLJIT_MEM1(SLJIT_LOCALS_REG))) \
 		SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
 	else if ((p) & SLJIT_MEM) { \
-		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & 0xf)); \
-		if ((p) & 0xf0) { \
-			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(((p) >> 4) & 0xf)); \
+		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
+		if ((p) & OFFS_REG_MASK) { \
+			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
 			SLJIT_ASSERT(!((i) & ~0x3)); \
 		} \
-		SLJIT_ASSERT(((p) >> 9) == 0); \
+		SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
 	} \
 	else \
 		SLJIT_ASSERT_STOP();
@@ -617,12 +656,12 @@ static SLJIT_INLINE void set_const(struct sljit_const *const_, struct sljit_comp
 	else if ((p) == (SLJIT_MEM1(SLJIT_LOCALS_REG))) \
 		SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
 	else if ((p) & SLJIT_MEM) { \
-		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & 0xf)); \
-		if ((p) & 0xf0) { \
-			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(((p) >> 4) & 0xf)); \
+		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
+		if ((p) & OFFS_REG_MASK) { \
+			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
 			SLJIT_ASSERT(!((i) & ~0x3)); \
 		} \
-		SLJIT_ASSERT(((p) >> 9) == 0); \
+		SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
 	} \
 	else \
 		SLJIT_ASSERT_STOP();
@@ -631,23 +670,23 @@ static SLJIT_INLINE void set_const(struct sljit_const *const_, struct sljit_comp
 	if ((p) >= SLJIT_FLOAT_REG1 && (p) <= SLJIT_FLOAT_REG6) \
 		SLJIT_ASSERT(i == 0); \
 	else if ((p) & SLJIT_MEM) { \
-		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & 0xf)); \
-		if ((p) & 0xf0) { \
-			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(((p) >> 4) & 0xf)); \
-			SLJIT_ASSERT(((p) & 0xf0) != (SLJIT_LOCALS_REG << 4) && !(i & ~0x3)); \
+		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
+		if ((p) & OFFS_REG_MASK) { \
+			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+			SLJIT_ASSERT(((p) & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_LOCALS_REG) && !(i & ~0x3)); \
 		} else \
-			SLJIT_ASSERT((((p) >> 4) & 0xf) == 0); \
-		SLJIT_ASSERT(((p) >> 9) == 0); \
+			SLJIT_ASSERT(OFFS_REG(p) == 0); \
+		SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
 	} \
 	else \
 		SLJIT_ASSERT_STOP();
 
 #define FUNCTION_CHECK_OP1() \
 	if (GET_OPCODE(op) >= SLJIT_MOVU && GET_OPCODE(op) <= SLJIT_MOVU_P) { \
-		SLJIT_ASSERT(!(src & SLJIT_MEM) || (src & 0xf) != SLJIT_LOCALS_REG); \
-		SLJIT_ASSERT(!(dst & SLJIT_MEM) || (dst & 0xf) != SLJIT_LOCALS_REG); \
-		if ((src & SLJIT_MEM) && (src & 0xf)) \
-			SLJIT_ASSERT((dst & 0xf) != (src & 0xf) && ((dst >> 4) & 0xf) != (src & 0xf)); \
+		SLJIT_ASSERT(!(src & SLJIT_MEM) || (src & REG_MASK) != SLJIT_LOCALS_REG); \
+		SLJIT_ASSERT(!(dst & SLJIT_MEM) || (dst & REG_MASK) != SLJIT_LOCALS_REG); \
+		if ((src & SLJIT_MEM) && (src & REG_MASK)) \
+			SLJIT_ASSERT((dst & REG_MASK) != (src & REG_MASK) && OFFS_REG(dst) != (src & REG_MASK)); \
 	}
 
 #endif
@@ -670,7 +709,7 @@ static char* freg_names[] = {
 	(char*)"f4", (char*)"f5", (char*)"f6"
 };
 
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE)
 #ifdef _WIN64
 #	define SLJIT_PRINT_D	"I64"
 #else
@@ -684,18 +723,18 @@ static char* freg_names[] = {
 	if ((p) & SLJIT_IMM) \
 		fprintf(compiler->verbose, "#%" SLJIT_PRINT_D "d", (i)); \
 	else if ((p) & SLJIT_MEM) { \
-		if ((p) & 0xf) { \
+		if ((p) & REG_MASK) { \
 			if (i) { \
-				if (((p) >> 4) & 0xf) \
-					fprintf(compiler->verbose, "[%s + %s * %d]", reg_names[(p) & 0xF], reg_names[((p) >> 4)& 0xF], 1 << (i)); \
+				if ((p) & OFFS_REG_MASK) \
+					fprintf(compiler->verbose, "[%s + %s * %d]", reg_names[(p) & REG_MASK], reg_names[OFFS_REG(p)], 1 << (i)); \
 				else \
-					fprintf(compiler->verbose, "[%s + #%" SLJIT_PRINT_D "d]", reg_names[(p) & 0xF], (i)); \
+					fprintf(compiler->verbose, "[%s + #%" SLJIT_PRINT_D "d]", reg_names[(p) & REG_MASK], (i)); \
 			} \
 			else { \
-				if (((p) >> 4) & 0xf) \
-					fprintf(compiler->verbose, "[%s + %s]", reg_names[(p) & 0xF], reg_names[((p) >> 4)& 0xF]); \
+				if ((p) & OFFS_REG_MASK) \
+					fprintf(compiler->verbose, "[%s + %s]", reg_names[(p) & REG_MASK], reg_names[OFFS_REG(p)]); \
 				else \
-					fprintf(compiler->verbose, "[%s]", reg_names[(p) & 0xF]); \
+					fprintf(compiler->verbose, "[%s]", reg_names[(p) & REG_MASK]); \
 			} \
 		} \
 		else \
@@ -704,18 +743,18 @@ static char* freg_names[] = {
 		fprintf(compiler->verbose, "%s", reg_names[p]);
 #define sljit_verbose_fparam(p, i) \
 	if ((p) & SLJIT_MEM) { \
-		if ((p) & 0xf) { \
+		if ((p) & REG_MASK) { \
 			if (i) { \
-				if (((p) >> 4) & 0xf) \
-					fprintf(compiler->verbose, "[%s + %s * %d]", reg_names[(p) & 0xF], reg_names[((p) >> 4)& 0xF], 1 << (i)); \
+				if ((p) & OFFS_REG_MASK) \
+					fprintf(compiler->verbose, "[%s + %s * %d]", reg_names[(p) & REG_MASK], reg_names[OFFS_REG(p)], 1 << (i)); \
 				else \
-					fprintf(compiler->verbose, "[%s + #%" SLJIT_PRINT_D "d]", reg_names[(p) & 0xF], (i)); \
+					fprintf(compiler->verbose, "[%s + #%" SLJIT_PRINT_D "d]", reg_names[(p) & REG_MASK], (i)); \
 			} \
 			else { \
-				if (((p) >> 4) & 0xF) \
-					fprintf(compiler->verbose, "[%s + %s]", reg_names[(p) & 0xF], reg_names[((p) >> 4)& 0xF]); \
+				if ((p) & OFFS_REG_MASK) \
+					fprintf(compiler->verbose, "[%s + %s]", reg_names[(p) & REG_MASK], reg_names[OFFS_REG(p)]); \
 				else \
-					fprintf(compiler->verbose, "[%s]", reg_names[(p) & 0xF]); \
+					fprintf(compiler->verbose, "[%s]", reg_names[(p) & REG_MASK]); \
 			} \
 		} \
 		else \
@@ -941,7 +980,7 @@ static SLJIT_INLINE void check_sljit_emit_op1(struct sljit_compiler *compiler, s
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
 		fprintf(compiler->verbose, "  %s%s%s%s%s%s%s%s ", !(op & SLJIT_INT_OP) ? "" : "i", op_names[GET_OPCODE(op)],
-			!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_SET_S) ? "" : ".s", !(op & SLJIT_SET_U) ? "" : ".u",
+			!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_SET_U) ? "" : ".u", !(op & SLJIT_SET_S) ? "" : ".s",
 			!(op & SLJIT_SET_O) ? "" : ".o", !(op & SLJIT_SET_C) ? "" : ".c", !(op & SLJIT_KEEP_FLAGS) ? "" : ".k");
 		sljit_verbose_param(dst, dstw);
 		fprintf(compiler->verbose, ", ");
@@ -983,7 +1022,7 @@ static SLJIT_INLINE void check_sljit_emit_op2(struct sljit_compiler *compiler, s
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
 		fprintf(compiler->verbose, "  %s%s%s%s%s%s%s%s ", !(op & SLJIT_INT_OP) ? "" : "i", op_names[GET_OPCODE(op)],
-			!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_SET_S) ? "" : ".s", !(op & SLJIT_SET_U) ? "" : ".u",
+			!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_SET_U) ? "" : ".u", !(op & SLJIT_SET_S) ? "" : ".s",
 			!(op & SLJIT_SET_O) ? "" : ".o", !(op & SLJIT_SET_C) ? "" : ".c", !(op & SLJIT_KEEP_FLAGS) ? "" : ".k");
 		sljit_verbose_param(dst, dstw);
 		fprintf(compiler->verbose, ", ");
@@ -1225,7 +1264,7 @@ static SLJIT_INLINE void check_sljit_emit_op_flags(struct sljit_compiler *compil
 	SLJIT_ASSERT(type >= SLJIT_C_EQUAL && type < SLJIT_JUMP);
 	SLJIT_ASSERT(op == SLJIT_MOV || GET_OPCODE(op) == SLJIT_MOV_UI || GET_OPCODE(op) == SLJIT_MOV_SI
 		|| (GET_OPCODE(op) >= SLJIT_AND && GET_OPCODE(op) <= SLJIT_XOR));
-	SLJIT_ASSERT((op & (SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C)) == 0);
+	SLJIT_ASSERT((op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C)) == 0);
 	SLJIT_ASSERT((op & (SLJIT_SET_E | SLJIT_KEEP_FLAGS)) != (SLJIT_SET_E | SLJIT_KEEP_FLAGS));
 #if (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (GET_OPCODE(op) < SLJIT_ADD) {
@@ -1340,24 +1379,28 @@ static SLJIT_INLINE sljit_si emit_mov_before_return(struct sljit_compiler *compi
 #elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 #	include "sljitNativeX86_common.c"
 #elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
-#	include "sljitNativeARM_v5.c"
+#	include "sljitNativeARM_32.c"
 #elif (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
-#	include "sljitNativeARM_v5.c"
+#	include "sljitNativeARM_32.c"
 #elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-#	include "sljitNativeARM_Thumb2.c"
+#	include "sljitNativeARM_T2_32.c"
+#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+#	include "sljitNativeARM_64.c"
 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
 #	include "sljitNativePPC_common.c"
 #elif (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 #	include "sljitNativePPC_common.c"
 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 #	include "sljitNativeMIPS_common.c"
+#elif (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+#	include "sljitNativeMIPS_common.c"
 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
 #	include "sljitNativeSPARC_common.c"
 #elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
-#	include "sljitNativeTILEGX.c"
+#	include "sljitNativeTILEGX_64.c"
 #endif
 
-#if !(defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#if !(defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
 
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
 	sljit_si src1, sljit_sw src1w,
@@ -1371,6 +1414,19 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler
 	check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w);
 
 	condition = type & 0xff;
+#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+	if ((condition == SLJIT_C_EQUAL || condition == SLJIT_C_NOT_EQUAL)) {
+		if ((src1 & SLJIT_IMM) && !src1w) {
+			src1 = src2;
+			src1w = src2w;
+			src2 = SLJIT_IMM;
+			src2w = 0;
+		}
+		if ((src2 & SLJIT_IMM) && !src2w)
+			return emit_cmp_to0(compiler, type, src1, src1w);
+	}
+#endif
+
 	if (SLJIT_UNLIKELY((src1 & SLJIT_IMM) && !(src2 & SLJIT_IMM))) {
 		/* Immediate is prefered as second argument by most architectures. */
 		switch (condition) {
diff --git a/src/3rdparty/pcre/sljit/sljitLir.h b/src/3rdparty/pcre/sljit/sljitLir.h
index 920689d2ec..e2cd21846d 100644
--- a/src/3rdparty/pcre/sljit/sljitLir.h
+++ b/src/3rdparty/pcre/sljit/sljitLir.h
@@ -265,13 +265,19 @@ struct sljit_compiler {
 	sljit_sw cache_argw;
 #endif
 
+#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+	sljit_si locals_offset;
+	sljit_si cache_arg;
+	sljit_sw cache_argw;
+#endif
+
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 	sljit_sw imm;
 	sljit_si cache_arg;
 	sljit_sw cache_argw;
 #endif
 
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
 	sljit_si delay_slot;
 	sljit_si cache_arg;
 	sljit_sw cache_argw;
@@ -478,11 +484,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 
 /* Register output: simply the name of the register.
    For destination, you can use SLJIT_UNUSED as well. */
-#define SLJIT_MEM		0x100
+#define SLJIT_MEM		0x80
 #define SLJIT_MEM0()		(SLJIT_MEM)
 #define SLJIT_MEM1(r1)		(SLJIT_MEM | (r1))
-#define SLJIT_MEM2(r1, r2)	(SLJIT_MEM | (r1) | ((r2) << 4))
-#define SLJIT_IMM		0x200
+#define SLJIT_MEM2(r1, r2)	(SLJIT_MEM | (r1) | ((r2) << 8))
+#define SLJIT_IMM		0x40
 
 /* Set 32 bit operation mode (I) on 64 bit CPUs. The flag is totally ignored on
    32 bit CPUs. If this flag is set for an arithmetic operation, it uses only the
@@ -494,12 +500,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
    is specified, all register arguments must be the result of other operations with
    the same SLJIT_INT_OP flag. In other words, although a register can hold either
    a 64 or 32 bit value, these values cannot be mixed. The only exceptions are
-   SLJIT_IMOV and SLJIT_IMOVU (SLJIT_MOV_SI/SLJIT_MOV_UI/SLJIT_MOVU_SI/SLJIT_MOV_UI
-   with SLJIT_INT_OP flag) which can convert any source argument to SLJIT_INT_OP
-   compatible result. This conversion might be unnecessary on some CPUs like x86-64,
-   since the upper 32 bit is always ignored. In this case SLJIT is clever enough
-   to not generate any instructions if the source and destination operands are the
-   same registers. Affects sljit_emit_op0, sljit_emit_op1 and sljit_emit_op2. */
+   SLJIT_IMOV and SLJIT_IMOVU (SLJIT_MOV_SI/SLJIT_MOVU_SI with SLJIT_INT_OP flag)
+   which can convert any source argument to SLJIT_INT_OP compatible result. This
+   conversion might be unnecessary on some CPUs like x86-64, since the upper 32
+   bit is always ignored. In this case SLJIT is clever enough to not generate any
+   instructions if the source and destination operands are the same registers.
+   Affects sljit_emit_op0, sljit_emit_op1 and sljit_emit_op2. */
 #define SLJIT_INT_OP		0x100
 
 /* Single precision mode (SP). This flag is similar to SLJIT_INT_OP, just
@@ -525,10 +531,10 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 
 /* Set Equal (Zero) status flag (E). */
 #define SLJIT_SET_E			0x0200
+/* Set unsigned status flag (U). */
+#define SLJIT_SET_U			0x0400
 /* Set signed status flag (S). */
-#define SLJIT_SET_S			0x0400
-/* Set unsgined status flag (U). */
-#define SLJIT_SET_U			0x0800
+#define SLJIT_SET_S			0x0800
 /* Set signed overflow flag (O). */
 #define SLJIT_SET_O			0x1000
 /* Set carry flag (C).
@@ -575,7 +581,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op);
 
 /* Notes for MOV instructions:
-   U = Mov with update (post form). If source or destination defined as SLJIT_MEM1(r1)
+   U = Mov with update (pre form). If source or destination defined as SLJIT_MEM1(r1)
        or SLJIT_MEM2(r1, r2), r1 is increased by the sum of r2 and the constant argument
    UB = unsigned byte (8 bit)
    SB = signed byte (8 bit)
@@ -602,7 +608,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 /* Flags: I - (never set any flags)
    Note: see SLJIT_INT_OP for further details. */
 #define SLJIT_MOV_UI			11
-/* No SLJIT_INT_OP form, since it the same as SLJIT_IMOVU. */
+/* No SLJIT_INT_OP form, since it is the same as SLJIT_IMOV. */
 /* Flags: I - (never set any flags)
    Note: see SLJIT_INT_OP for further details. */
 #define SLJIT_MOV_SI			12
@@ -626,7 +632,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 /* Flags: I - (never set any flags)
    Note: see SLJIT_INT_OP for further details. */
 #define SLJIT_MOVU_UI			19
-/* No SLJIT_INT_OP form, since it the same as SLJIT_IMOVU. */
+/* No SLJIT_INT_OP form, since it is the same as SLJIT_IMOVU. */
 /* Flags: I - (never set any flags)
    Note: see SLJIT_INT_OP for further details. */
 #define SLJIT_MOVU_SI			20
@@ -656,7 +662,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 /* Flags: I | C | K */
 #define SLJIT_ADDC			26
 #define SLJIT_IADDC			(SLJIT_ADDC | SLJIT_INT_OP)
-/* Flags: I | E | S | U | O | C | K */
+/* Flags: I | E | U | S | O | C | K */
 #define SLJIT_SUB			27
 #define SLJIT_ISUB			(SLJIT_SUB | SLJIT_INT_OP)
 /* Flags: I | C | K */
@@ -851,8 +857,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compile
 
 /* Set the destination of the jump to this label. */
 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_label(struct sljit_jump *jump, struct sljit_label* label);
-/* Only for jumps defined with SLJIT_REWRITABLE_JUMP flag.
-   Note: use sljit_emit_ijump for fixed jumps. */
+/* Set the destination address of the jump to this label. */
 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_target(struct sljit_jump *jump, sljit_uw target);
 
 /* Call function or jump anywhere. Both direct and indirect form
diff --git a/src/3rdparty/pcre/sljit/sljitNativeARM_v5.c b/src/3rdparty/pcre/sljit/sljitNativeARM_32.c
index e3ca3d9bb1..6747c4f617 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeARM_v5.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeARM_32.c
@@ -1379,54 +1379,57 @@ static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si inp_fl
 			EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(MVN_DP, 0, reg, SLJIT_UNUSED, imm));
 			return -1;
 		}
-		return (inp_flags & ARG_TEST) ? SLJIT_SUCCESS : 0;
+		return 0;
 	}
 
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
 	/* Fast loads/stores. */
-	if (arg & 0xf) {
-		if (!(arg & 0xf0)) {
-			if (IS_TYPE1_TRANSFER(inp_flags)) {
-				if (argw >= 0 && argw <= 0xfff) {
-					if (inp_flags & ARG_TEST)
-						return 1;
-					EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & 0xf, argw));
-					return -1;
-				}
-				if (argw < 0 && argw >= -0xfff) {
-					if (inp_flags & ARG_TEST)
-						return 1;
-					EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 0, inp_flags & WRITE_BACK, reg, arg & 0xf, -argw));
-					return -1;
-				}
-			}
-			else {
-				if (argw >= 0 && argw <= 0xff) {
-					if (inp_flags & ARG_TEST)
-						return 1;
-					EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & 0xf, TYPE2_TRANSFER_IMM(argw)));
-					return -1;
-				}
-				if (argw < 0 && argw >= -0xff) {
-					if (inp_flags & ARG_TEST)
-						return 1;
-					argw = -argw;
-					EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 0, inp_flags & WRITE_BACK, reg, arg & 0xf, TYPE2_TRANSFER_IMM(argw)));
-					return -1;
-				}
-			}
+	if (!(arg & REG_MASK))
+		return 0;
+
+	if (arg & OFFS_REG_MASK) {
+		if ((argw & 0x3) != 0 && !IS_TYPE1_TRANSFER(inp_flags))
+			return 0;
+
+		if (inp_flags & ARG_TEST)
+			return 1;
+		EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & REG_MASK,
+			RM(OFFS_REG(arg)) | (IS_TYPE1_TRANSFER(inp_flags) ? SRC2_IMM : 0) | ((argw & 0x3) << 7)));
+		return -1;
+	}
+
+	if (IS_TYPE1_TRANSFER(inp_flags)) {
+		if (argw >= 0 && argw <= 0xfff) {
+			if (inp_flags & ARG_TEST)
+				return 1;
+			EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & REG_MASK, argw));
+			return -1;
+		}
+		if (argw < 0 && argw >= -0xfff) {
+			if (inp_flags & ARG_TEST)
+				return 1;
+			EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 0, inp_flags & WRITE_BACK, reg, arg & REG_MASK, -argw));
+			return -1;
+		}
+	}
+	else {
+		if (argw >= 0 && argw <= 0xff) {
+			if (inp_flags & ARG_TEST)
+				return 1;
+			EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & REG_MASK, TYPE2_TRANSFER_IMM(argw)));
+			return -1;
 		}
-		else if ((argw & 0x3) == 0 || IS_TYPE1_TRANSFER(inp_flags)) {
+		if (argw < 0 && argw >= -0xff) {
 			if (inp_flags & ARG_TEST)
 				return 1;
-			EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & 0xf,
-				RM((arg >> 4) & 0xf) | (IS_TYPE1_TRANSFER(inp_flags) ? SRC2_IMM : 0) | ((argw & 0x3) << 7)));
+			argw = -argw;
+			EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 0, inp_flags & WRITE_BACK, reg, arg & REG_MASK, TYPE2_TRANSFER_IMM(argw)));
 			return -1;
 		}
 	}
 
-	return (inp_flags & ARG_TEST) ? SLJIT_SUCCESS : 0;
+	return 0;
 }
 
 /* See getput_arg below.
@@ -1439,10 +1442,10 @@ static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_
 		return 0;
 
 	/* Always a simple operation. */
-	if (arg & 0xf0)
+	if (arg & OFFS_REG_MASK)
 		return 0;
 
-	if (!(arg & 0xf)) {
+	if (!(arg & REG_MASK)) {
 		/* Immediate access. */
 		if ((next_arg & SLJIT_MEM) && ((sljit_uw)argw - (sljit_uw)next_argw <= 0xfff || (sljit_uw)next_argw - (sljit_uw)argw <= 0xfff))
 			return 1;
@@ -1469,7 +1472,7 @@ static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_
 
 #define TEST_WRITE_BACK() \
 	if (inp_flags & WRITE_BACK) { \
-		tmp_r = arg & 0xf; \
+		tmp_r = arg & REG_MASK; \
 		if (reg == tmp_r) { \
 			/* This can only happen for stores */ \
 			/* since ldr reg, [reg, ...]! has no meaning */ \
@@ -1497,7 +1500,7 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 	tmp_r = (inp_flags & LOAD_DATA) ? reg : TMP_REG3;
 	max_delta = IS_TYPE1_TRANSFER(inp_flags) ? 0xfff : 0xff;
 
-	if ((arg & 0xf) == SLJIT_UNUSED) {
+	if ((arg & REG_MASK) == SLJIT_UNUSED) {
 		/* Write back is not used. */
 		imm = (sljit_uw)(argw - compiler->cache_argw);
 		if ((compiler->cache_arg & SLJIT_IMM) && (imm <= (sljit_uw)max_delta || imm >= (sljit_uw)-max_delta)) {
@@ -1530,11 +1533,11 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 		return SLJIT_SUCCESS;
 	}
 
-	if (arg & 0xf0) {
+	if (arg & OFFS_REG_MASK) {
 		SLJIT_ASSERT((argw & 0x3) && !(max_delta & 0xf00));
 		if (inp_flags & WRITE_BACK)
-			tmp_r = arg & 0xf;
-		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, tmp_r, arg & 0xf, RM((arg >> 4) & 0xf) | ((argw & 0x3) << 7)));
+			tmp_r = arg & REG_MASK;
+		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, tmp_r, arg & REG_MASK, RM(OFFS_REG(arg)) | ((argw & 0x3) << 7)));
 		EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, 0, reg, tmp_r, TYPE2_TRANSFER_IMM(0)));
 		return SLJIT_SUCCESS;
 	}
@@ -1555,7 +1558,7 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 	imm = get_imm(argw & ~max_delta);
 	if (imm) {
 		TEST_WRITE_BACK();
-		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, tmp_r, arg & 0xf, imm));
+		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, tmp_r, arg & REG_MASK, imm));
 		GETPUT_ARG_DATA_TRANSFER(1, inp_flags & WRITE_BACK, reg, tmp_r, argw & max_delta);
 		return SLJIT_SUCCESS;
 	}
@@ -1564,14 +1567,14 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 	if (imm) {
 		argw = -argw;
 		TEST_WRITE_BACK();
-		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(SUB_DP, 0, tmp_r, arg & 0xf, imm));
+		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(SUB_DP, 0, tmp_r, arg & REG_MASK, imm));
 		GETPUT_ARG_DATA_TRANSFER(0, inp_flags & WRITE_BACK, reg, tmp_r, argw & max_delta);
 		return SLJIT_SUCCESS;
 	}
 
 	if ((compiler->cache_arg & SLJIT_IMM) && compiler->cache_argw == argw) {
 		TEST_WRITE_BACK();
-		EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & 0xf, RM(TMP_REG3) | (max_delta & 0xf00 ? SRC2_IMM : 0)));
+		EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & REG_MASK, RM(TMP_REG3) | (max_delta & 0xf00 ? SRC2_IMM : 0)));
 		return SLJIT_SUCCESS;
 	}
 
@@ -1583,7 +1586,7 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 		compiler->cache_argw = argw;
 
 		TEST_WRITE_BACK();
-		EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & 0xf, RM(TMP_REG3) | (max_delta & 0xf00 ? SRC2_IMM : 0)));
+		EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & REG_MASK, RM(TMP_REG3) | (max_delta & 0xf00 ? SRC2_IMM : 0)));
 		return SLJIT_SUCCESS;
 	}
 
@@ -1591,7 +1594,7 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 	if (arg == next_arg && !(inp_flags & WRITE_BACK) && (imm <= (sljit_uw)max_delta || imm >= (sljit_uw)-max_delta)) {
 		SLJIT_ASSERT(inp_flags & LOAD_DATA);
 		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
-		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG3, TMP_REG3, reg_map[arg & 0xf]));
+		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG3, TMP_REG3, reg_map[arg & REG_MASK]));
 
 		compiler->cache_arg = arg;
 		compiler->cache_argw = argw;
@@ -1600,14 +1603,14 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 		return SLJIT_SUCCESS;
 	}
 
-	if ((arg & 0xf) == tmp_r) {
+	if ((arg & REG_MASK) == tmp_r) {
 		compiler->cache_arg = SLJIT_IMM;
 		compiler->cache_argw = argw;
 		tmp_r = TMP_REG3;
 	}
 
 	FAIL_IF(load_immediate(compiler, tmp_r, argw));
-	EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & 0xf, reg_map[tmp_r] | (max_delta & 0xf00 ? SRC2_IMM : 0)));
+	EMIT_INSTRUCTION(EMIT_DATA_TRANSFER(inp_flags, 1, inp_flags & WRITE_BACK, reg, arg & REG_MASK, reg_map[tmp_r] | (max_delta & 0xf00 ? SRC2_IMM : 0)));
 	return SLJIT_SUCCESS;
 }
 
@@ -1653,7 +1656,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 			return SLJIT_SUCCESS;
 		dst_r = TMP_REG2;
 	}
-	else if (dst <= TMP_REG3) {
+	else if (FAST_IS_REG(dst)) {
 		dst_r = dst;
 		flags |= REG_DEST;
 		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -1672,9 +1675,9 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 	}
 
 	/* Source 1. */
-	if (src1 <= TMP_REG3)
+	if (FAST_IS_REG(src1))
 		src1_r = src1;
-	else if (src2 <= TMP_REG3) {
+	else if (FAST_IS_REG(src2)) {
 		flags |= ARGS_SWAPPED;
 		src1_r = src2;
 		src2 = src1;
@@ -1720,7 +1723,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 
 	/* Source 2. */
 	if (src2_r == 0) {
-		if (src2 <= TMP_REG3) {
+		if (FAST_IS_REG(src2)) {
 			src2_r = src2;
 			flags |= REG_SOURCE;
 			if (!(flags & REG_DEST) && op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -2026,9 +2029,13 @@ static void init_compiler(void)
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
 {
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
+#else
 	if (arm_fpu_type == -1)
 		init_compiler();
 	return arm_fpu_type;
+#endif
 }
 
 #else
@@ -2056,18 +2063,18 @@ static sljit_si emit_fop_mem(struct sljit_compiler *compiler, sljit_si flags, sl
 	sljit_sw inst = VSTR_F32 | (flags & (SLJIT_SINGLE_OP | FPU_LOAD));
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
-	if (SLJIT_UNLIKELY(arg & 0xf0)) {
-		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG1, arg & 0xf, RM((arg >> 4) & 0xf) | ((argw & 0x3) << 7)));
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
+		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG1, arg & REG_MASK, RM(OFFS_REG(arg)) | ((argw & 0x3) << 7)));
 		arg = SLJIT_MEM | TMP_REG1;
 		argw = 0;
 	}
 
 	/* Fast loads and stores. */
-	if ((arg & 0xf)) {
+	if ((arg & REG_MASK)) {
 		if (!(argw & ~0x3fc))
-			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 1, arg & 0xf, reg, argw >> 2));
+			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 1, arg & REG_MASK, reg, argw >> 2));
 		if (!(-argw & ~0x3fc))
-			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 0, arg & 0xf, reg, (-argw) >> 2));
+			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 0, arg & REG_MASK, reg, (-argw) >> 2));
 	}
 
 	if (compiler->cache_arg == arg) {
@@ -2083,29 +2090,29 @@ static sljit_si emit_fop_mem(struct sljit_compiler *compiler, sljit_si flags, sl
 		}
 	}
 
-	if (arg & 0xf) {
-		if (emit_set_delta(compiler, TMP_REG1, arg & 0xf, argw) != SLJIT_ERR_UNSUPPORTED) {
+	if (arg & REG_MASK) {
+		if (emit_set_delta(compiler, TMP_REG1, arg & REG_MASK, argw) != SLJIT_ERR_UNSUPPORTED) {
 			FAIL_IF(compiler->error);
 			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 1, TMP_REG1, reg, 0));
 		}
 		imm = get_imm(argw & ~0x3fc);
 		if (imm) {
-			EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG1, arg & 0xf, imm));
+			EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG1, arg & REG_MASK, imm));
 			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 1, TMP_REG1, reg, (argw & 0x3fc) >> 2));
 		}
 		imm = get_imm(-argw & ~0x3fc);
 		if (imm) {
 			argw = -argw;
-			EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(SUB_DP, 0, TMP_REG1, arg & 0xf, imm));
+			EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(SUB_DP, 0, TMP_REG1, arg & REG_MASK, imm));
 			return push_inst(compiler, EMIT_FPU_DATA_TRANSFER(inst, 0, TMP_REG1, reg, (argw & 0x3fc) >> 2));
 		}
 	}
 
 	compiler->cache_arg = arg;
 	compiler->cache_argw = argw;
-	if (arg & 0xf) {
+	if (arg & REG_MASK) {
 		FAIL_IF(load_immediate(compiler, TMP_REG1, argw));
-		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG3, arg & 0xf, reg_map[TMP_REG1]));
+		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(ADD_DP, 0, TMP_REG3, arg & REG_MASK, reg_map[TMP_REG1]));
 	}
 	else
 		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
@@ -2128,11 +2135,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 	op ^= SLJIT_SINGLE_OP;
 
 	if (GET_OPCODE(op) == SLJIT_CMPD) {
-		if (dst > SLJIT_FLOAT_REG6) {
+		if (dst & SLJIT_MEM) {
 			FAIL_IF(emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, TMP_FREG1, dst, dstw));
 			dst = TMP_FREG1;
 		}
-		if (src > SLJIT_FLOAT_REG6) {
+		if (src & SLJIT_MEM) {
 			FAIL_IF(emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, TMP_FREG2, src, srcw));
 			src = TMP_FREG2;
 		}
@@ -2141,9 +2148,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 		return SLJIT_SUCCESS;
 	}
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : dst;
+	dst_fr = FAST_IS_REG(dst) ? dst : TMP_FREG1;
 
-	if (src > SLJIT_FLOAT_REG6) {
+	if (src & SLJIT_MEM) {
 		FAIL_IF(emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, dst_fr, src, srcw));
 		src = dst_fr;
 	}
@@ -2184,14 +2191,14 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	compiler->cache_argw = 0;
 	op ^= SLJIT_SINGLE_OP;
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : dst;
+	dst_fr = FAST_IS_REG(dst) ? dst : TMP_FREG1;
 
-	if (src2 > SLJIT_FLOAT_REG6) {
+	if (src2 & SLJIT_MEM) {
 		FAIL_IF(emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, TMP_FREG2, src2, src2w));
 		src2 = TMP_FREG2;
 	}
 
-	if (src1 > SLJIT_FLOAT_REG6) {
+	if (src1 & SLJIT_MEM) {
 		FAIL_IF(emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, TMP_FREG1, src1, src1w));
 		src1 = TMP_FREG1;
 	}
@@ -2238,7 +2245,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
 
-	if (dst <= TMP_REG3)
+	if (FAST_IS_REG(dst))
 		return push_inst(compiler, EMIT_DATA_PROCESS_INS(MOV_DP, 0, dst, SLJIT_UNUSED, RM(TMP_REG3)));
 
 	/* Memory. */
@@ -2257,7 +2264,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 	check_sljit_emit_fast_return(compiler, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= TMP_REG3)
+	if (FAST_IS_REG(src))
 		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(MOV_DP, 0, TMP_REG3, SLJIT_UNUSED, RM(src)));
 	else if (src & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, WORD_DATA | LOAD_DATA, TMP_REG3, src, srcw))
@@ -2398,26 +2405,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	/* In ARM, we don't need to touch the arguments. */
-	if (src & SLJIT_IMM) {
-		jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
-		FAIL_IF(!jump);
-		set_jump(jump, compiler, JUMP_ADDR | ((type >= SLJIT_FAST_CALL) ? IS_BL : 0));
-		jump->u.target = srcw;
-
-#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
-		if (type >= SLJIT_FAST_CALL)
-			FAIL_IF(prepare_blx(compiler));
-		FAIL_IF(push_inst_with_unique_literal(compiler, EMIT_DATA_TRANSFER(WORD_DATA | LOAD_DATA, 1, 0, type <= SLJIT_JUMP ? TMP_PC : TMP_REG1, TMP_PC, 0), 0));
-		if (type >= SLJIT_FAST_CALL)
-			FAIL_IF(emit_blx(compiler));
-#else
-		FAIL_IF(emit_imm(compiler, TMP_REG1, 0));
-		FAIL_IF(push_inst(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RM(TMP_REG1)));
-#endif
-		jump->addr = compiler->size;
-	}
-	else {
-		if (src <= TMP_REG3)
+	if (!(src & SLJIT_IMM)) {
+		if (FAST_IS_REG(src))
 			return push_inst(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RM(src));
 
 		SLJIT_ASSERT(src & SLJIT_MEM);
@@ -2425,6 +2414,22 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 		return push_inst(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RM(TMP_REG2));
 	}
 
+	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
+	FAIL_IF(!jump);
+	set_jump(jump, compiler, JUMP_ADDR | ((type >= SLJIT_FAST_CALL) ? IS_BL : 0));
+	jump->u.target = srcw;
+
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
+	if (type >= SLJIT_FAST_CALL)
+		FAIL_IF(prepare_blx(compiler));
+	FAIL_IF(push_inst_with_unique_literal(compiler, EMIT_DATA_TRANSFER(WORD_DATA | LOAD_DATA, 1, 0, type <= SLJIT_JUMP ? TMP_PC : TMP_REG1, TMP_PC, 0), 0));
+	if (type >= SLJIT_FAST_CALL)
+		FAIL_IF(emit_blx(compiler));
+#else
+	FAIL_IF(emit_imm(compiler, TMP_REG1, 0));
+	FAIL_IF(push_inst(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RM(TMP_REG1)));
+#endif
+	jump->addr = compiler->size;
 	return SLJIT_SUCCESS;
 }
 
@@ -2446,7 +2451,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 
 	op = GET_OPCODE(op);
 	cc = get_cc(type);
-	dst_r = (dst <= TMP_REG3) ? dst : TMP_REG2;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
 
 	if (op < SLJIT_ADD) {
 		EMIT_INSTRUCTION(EMIT_DATA_PROCESS_INS(MOV_DP, 0, dst_r, SLJIT_UNUSED, SRC2_IMM | 0));
@@ -2455,7 +2460,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	}
 
 	ins = (op == SLJIT_AND ? AND_DP : (op == SLJIT_OR ? ORR_DP : EOR_DP));
-	if ((op == SLJIT_OR || op == SLJIT_XOR) && dst <= TMP_REG3 && dst == src) {
+	if ((op == SLJIT_OR || op == SLJIT_XOR) && FAST_IS_REG(dst) && dst == src) {
 		EMIT_INSTRUCTION((EMIT_DATA_PROCESS_INS(ins, 0, dst, dst, SRC2_IMM | 1) & ~COND_MASK) | cc);
 		/* The condition must always be set, even if the ORR/EOR is not executed above. */
 		return (flags & SLJIT_SET_E) ? push_inst(compiler, EMIT_DATA_PROCESS_INS(MOV_DP, SET_FLAGS, TMP_REG1, SLJIT_UNUSED, RM(dst))) : SLJIT_SUCCESS;
@@ -2493,7 +2498,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
 	PTR_FAIL_IF(!const_);
 
-	reg = (dst <= TMP_REG3) ? dst : TMP_REG2;
+	reg = SLOW_IS_REG(dst) ? dst : TMP_REG2;
 
 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
 	PTR_FAIL_IF(push_inst_with_unique_literal(compiler, EMIT_DATA_TRANSFER(WORD_DATA | LOAD_DATA, 1, 0, reg, TMP_PC, 0), init_value));
@@ -2503,7 +2508,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 #endif
 	set_const(const_, compiler);
 
-	if (reg == TMP_REG2 && dst != SLJIT_UNUSED)
+	if (dst & SLJIT_MEM)
 		PTR_FAIL_IF(emit_op_mem(compiler, WORD_DATA, TMP_REG2, dst, dstw));
 	return const_;
 }
diff --git a/src/3rdparty/pcre/sljit/sljitNativeARM_64.c b/src/3rdparty/pcre/sljit/sljitNativeARM_64.c
new file mode 100644
index 0000000000..cfd1a38242
--- /dev/null
+++ b/src/3rdparty/pcre/sljit/sljitNativeARM_64.c
@@ -0,0 +1,1902 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char* sljit_get_platform_name(void)
+{
+	return "ARM-64" SLJIT_CPUINFO;
+}
+
+/* Length of an instruction word */
+typedef sljit_ui sljit_ins;
+
+#define TMP_ZERO	0
+
+#define TMP_REG1	(SLJIT_NO_REGISTERS + 1)
+#define TMP_REG2	(SLJIT_NO_REGISTERS + 2)
+#define TMP_REG3	(SLJIT_NO_REGISTERS + 3)
+#define TMP_REG4	(SLJIT_NO_REGISTERS + 4)
+#define TMP_LR		(SLJIT_NO_REGISTERS + 5)
+#define TMP_SP		(SLJIT_NO_REGISTERS + 6)
+
+#define TMP_FREG1	(0)
+#define TMP_FREG2	(SLJIT_FLOAT_REG6 + 1)
+
+static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 7] = {
+  31, 0, 1, 2, 3, 4, 19, 20, 21, 22, 23, 29, 9, 10, 11, 12, 30, 31
+};
+
+#define W_OP (1 << 31)
+#define RD(rd) (reg_map[rd])
+#define RT(rt) (reg_map[rt])
+#define RN(rn) (reg_map[rn] << 5)
+#define RT2(rt2) (reg_map[rt2] << 10)
+#define RM(rm) (reg_map[rm] << 16)
+#define VD(vd) (vd)
+#define VT(vt) (vt)
+#define VN(vn) ((vn) << 5)
+#define VM(vm) ((vm) << 16)
+
+/* --------------------------------------------------------------------- */
+/*  Instrucion forms                                                     */
+/* --------------------------------------------------------------------- */
+
+#define ADC 0x9a000000
+#define ADD 0x8b000000
+#define ADDI 0x91000000
+#define AND 0x8a000000
+#define ANDI 0x92000000
+#define ASRV 0x9ac02800
+#define B 0x14000000
+#define B_CC 0x54000000
+#define BL 0x94000000
+#define BLR 0xd63f0000
+#define BR 0xd61f0000
+#define BRK 0xd4200000
+#define CBZ 0xb4000000
+#define CLZ 0xdac01000
+#define CSINC 0x9a800400
+#define EOR 0xca000000
+#define EORI 0xd2000000
+#define FABS 0x1e60c000
+#define FADD 0x1e602800
+#define FCMP 0x1e602000
+#define FDIV 0x1e601800
+#define FMOV 0x1e604000
+#define FMUL 0x1e600800
+#define FNEG 0x1e614000
+#define FSUB 0x1e603800
+#define LDRI 0xf9400000
+#define LDP 0xa9400000
+#define LDP_PST 0xa8c00000
+#define LSLV 0x9ac02000
+#define LSRV 0x9ac02400
+#define MADD 0x9b000000
+#define MOVK 0xf2800000
+#define MOVN 0x92800000
+#define MOVZ 0xd2800000
+#define NOP 0xd503201f
+#define ORN 0xaa200000
+#define ORR 0xaa000000
+#define ORRI 0xb2000000
+#define RET 0xd65f0000
+#define SBC 0xda000000
+#define SBFM 0x93000000
+#define SDIV 0x9ac00c00
+#define SMADDL 0x9b200000
+#define SMULH 0x9b403c00
+#define STP 0xa9000000
+#define STP_PRE 0xa9800000
+#define STRI 0xf9000000
+#define STR_FI 0x3d000000
+#define STR_FR 0x3c206800
+#define STUR_FI 0x3c000000
+#define SUB 0xcb000000
+#define SUBI 0xd1000000
+#define SUBS 0xeb000000
+#define UBFM 0xd3000000
+#define UDIV 0x9ac00800
+#define UMULH 0x9bc03c00
+
+/* dest_reg is the absolute name of the register
+   Useful for reordering instructions in the delay slot. */
+static sljit_si push_inst(struct sljit_compiler *compiler, sljit_ins ins)
+{
+	sljit_ins *ptr = (sljit_ins*)ensure_buf(compiler, sizeof(sljit_ins));
+	FAIL_IF(!ptr);
+	*ptr = ins;
+	compiler->size++;
+	return SLJIT_SUCCESS;
+}
+
+static SLJIT_INLINE sljit_si emit_imm64_const(struct sljit_compiler *compiler, sljit_si dst, sljit_uw imm)
+{
+	FAIL_IF(push_inst(compiler, MOVZ | RD(dst) | ((imm & 0xffff) << 5)));
+	FAIL_IF(push_inst(compiler, MOVK | RD(dst) | (((imm >> 16) & 0xffff) << 5) | (1 << 21)));
+	FAIL_IF(push_inst(compiler, MOVK | RD(dst) | (((imm >> 32) & 0xffff) << 5) | (2 << 21)));
+	return push_inst(compiler, MOVK | RD(dst) | ((imm >> 48) << 5) | (3 << 21));
+}
+
+static SLJIT_INLINE void modify_imm64_const(sljit_ins* inst, sljit_uw new_imm)
+{
+	sljit_si dst = inst[0] & 0x1f;
+	SLJIT_ASSERT((inst[0] & 0xffe00000) == MOVZ && (inst[1] & 0xffe00000) == (MOVK | (1 << 21)));
+	inst[0] = MOVZ | dst | ((new_imm & 0xffff) << 5);
+	inst[1] = MOVK | dst | (((new_imm >> 16) & 0xffff) << 5) | (1 << 21);
+	inst[2] = MOVK | dst | (((new_imm >> 32) & 0xffff) << 5) | (2 << 21);
+	inst[3] = MOVK | dst | ((new_imm >> 48) << 5) | (3 << 21);
+}
+
+static SLJIT_INLINE sljit_si detect_jump_type(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
+{
+	sljit_sw diff;
+	sljit_uw target_addr;
+
+	if (jump->flags & SLJIT_REWRITABLE_JUMP) {
+		jump->flags |= PATCH_ABS64;
+		return 0;
+	}
+
+	if (jump->flags & JUMP_ADDR)
+		target_addr = jump->u.target;
+	else {
+		SLJIT_ASSERT(jump->flags & JUMP_LABEL);
+		target_addr = (sljit_uw)(code + jump->u.label->size);
+	}
+	diff = (sljit_sw)target_addr - (sljit_sw)(code_ptr + 4);
+
+	if (jump->flags & IS_COND) {
+		diff += sizeof(sljit_ins);
+		if (diff <= 0xfffff && diff >= -0x100000) {
+			code_ptr[-5] ^= (jump->flags & IS_CBZ) ? (0x1 << 24) : 0x1;
+			jump->addr -= sizeof(sljit_ins);
+			jump->flags |= PATCH_COND;
+			return 5;
+		}
+		diff -= sizeof(sljit_ins);
+	}
+
+	if (diff <= 0x7ffffff && diff >= -0x8000000) {
+		jump->flags |= PATCH_B;
+		return 4;
+	}
+
+	if (target_addr <= 0xffffffffl) {
+		if (jump->flags & IS_COND)
+			code_ptr[-5] -= (2 << 5);
+		code_ptr[-2] = code_ptr[0];
+		return 2;
+	}
+	if (target_addr <= 0xffffffffffffl) {
+		if (jump->flags & IS_COND)
+			code_ptr[-5] -= (1 << 5);
+		jump->flags |= PATCH_ABS48;
+		code_ptr[-1] = code_ptr[0];
+		return 1;
+	}
+
+	jump->flags |= PATCH_ABS64;
+	return 0;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compiler)
+{
+	struct sljit_memory_fragment *buf;
+	sljit_ins *code;
+	sljit_ins *code_ptr;
+	sljit_ins *buf_ptr;
+	sljit_ins *buf_end;
+	sljit_uw word_count;
+	sljit_uw addr;
+	sljit_si dst;
+
+	struct sljit_label *label;
+	struct sljit_jump *jump;
+	struct sljit_const *const_;
+
+	CHECK_ERROR_PTR();
+	check_sljit_generate_code(compiler);
+	reverse_buf(compiler);
+
+	code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
+	PTR_FAIL_WITH_EXEC_IF(code);
+	buf = compiler->buf;
+
+	code_ptr = code;
+	word_count = 0;
+	label = compiler->labels;
+	jump = compiler->jumps;
+	const_ = compiler->consts;
+
+	do {
+		buf_ptr = (sljit_ins*)buf->memory;
+		buf_end = buf_ptr + (buf->used_size >> 2);
+		do {
+			*code_ptr = *buf_ptr++;
+			/* These structures are ordered by their address. */
+			SLJIT_ASSERT(!label || label->size >= word_count);
+			SLJIT_ASSERT(!jump || jump->addr >= word_count);
+			SLJIT_ASSERT(!const_ || const_->addr >= word_count);
+			if (label && label->size == word_count) {
+				label->addr = (sljit_uw)code_ptr;
+				label->size = code_ptr - code;
+				label = label->next;
+			}
+			if (jump && jump->addr == word_count) {
+					jump->addr = (sljit_uw)(code_ptr - 4);
+					code_ptr -= detect_jump_type(jump, code_ptr, code);
+					jump = jump->next;
+			}
+			if (const_ && const_->addr == word_count) {
+				const_->addr = (sljit_uw)code_ptr;
+				const_ = const_->next;
+			}
+			code_ptr ++;
+			word_count ++;
+		} while (buf_ptr < buf_end);
+
+		buf = buf->next;
+	} while (buf);
+
+	if (label && label->size == word_count) {
+		label->addr = (sljit_uw)code_ptr;
+		label->size = code_ptr - code;
+		label = label->next;
+	}
+
+	SLJIT_ASSERT(!label);
+	SLJIT_ASSERT(!jump);
+	SLJIT_ASSERT(!const_);
+	SLJIT_ASSERT(code_ptr - code <= (sljit_sw)compiler->size);
+
+	jump = compiler->jumps;
+	while (jump) {
+		do {
+			addr = (jump->flags & JUMP_LABEL) ? jump->u.label->addr : jump->u.target;
+			buf_ptr = (sljit_ins*)jump->addr;
+			if (jump->flags & PATCH_B) {
+				addr = (sljit_sw)(addr - jump->addr) >> 2;
+				SLJIT_ASSERT((sljit_sw)addr <= 0x1ffffff && (sljit_sw)addr >= -0x2000000);
+				buf_ptr[0] = ((jump->flags & IS_BL) ? BL : B) | (addr & 0x3ffffff);
+				if (jump->flags & IS_COND)
+					buf_ptr[-1] -= (4 << 5);
+				break;
+			}
+			if (jump->flags & PATCH_COND) {
+				addr = (sljit_sw)(addr - jump->addr) >> 2;
+				SLJIT_ASSERT((sljit_sw)addr <= 0x3ffff && (sljit_sw)addr >= -0x40000);
+				buf_ptr[0] = (buf_ptr[0] & ~0xffffe0) | ((addr & 0x7ffff) << 5);
+				break;
+			}
+
+			SLJIT_ASSERT((jump->flags & (PATCH_ABS48 | PATCH_ABS64)) || addr <= 0xffffffffl);
+			SLJIT_ASSERT((jump->flags & PATCH_ABS64) || addr <= 0xffffffffffffl);
+
+			dst = buf_ptr[0] & 0x1f;
+			buf_ptr[0] = MOVZ | dst | ((addr & 0xffff) << 5);
+			buf_ptr[1] = MOVK | dst | (((addr >> 16) & 0xffff) << 5) | (1 << 21);
+			if (jump->flags & (PATCH_ABS48 | PATCH_ABS64))
+				buf_ptr[2] = MOVK | dst | (((addr >> 32) & 0xffff) << 5) | (2 << 21);
+			if (jump->flags & PATCH_ABS64)
+				buf_ptr[3] = MOVK | dst | (((addr >> 48) & 0xffff) << 5) | (3 << 21);
+		} while (0);
+		jump = jump->next;
+	}
+
+	compiler->error = SLJIT_ERR_COMPILED;
+	compiler->executable_size = (code_ptr - code) * sizeof(sljit_ins);
+	SLJIT_CACHE_FLUSH(code, code_ptr);
+	return code;
+}
+
+/* --------------------------------------------------------------------- */
+/*  Core code generator functions.                                       */
+/* --------------------------------------------------------------------- */
+
+#define COUNT_TRAILING_ZERO(value, result) \
+	result = 0; \
+	if (!(value & 0xffffffff)) { \
+		result += 32; \
+		value >>= 32; \
+	} \
+	if (!(value & 0xffff)) { \
+		result += 16; \
+		value >>= 16; \
+	} \
+	if (!(value & 0xff)) { \
+		result += 8; \
+		value >>= 8; \
+	} \
+	if (!(value & 0xf)) { \
+		result += 4; \
+		value >>= 4; \
+	} \
+	if (!(value & 0x3)) { \
+		result += 2; \
+		value >>= 2; \
+	} \
+	if (!(value & 0x1)) { \
+		result += 1; \
+		value >>= 1; \
+	}
+
+#define LOGICAL_IMM_CHECK 0x100
+
+static sljit_ins logical_imm(sljit_sw imm, sljit_si len)
+{
+	sljit_si negated, ones, right;
+	sljit_uw mask, uimm;
+	sljit_ins ins;
+
+	if (len & LOGICAL_IMM_CHECK) {
+		len &= ~LOGICAL_IMM_CHECK;
+		if (len == 32 && (imm == 0 || imm == -1))
+			return 0;
+		if (len == 16 && ((sljit_si)imm == 0 || (sljit_si)imm == -1))
+			return 0;
+	}
+
+	SLJIT_ASSERT((len == 32 && imm != 0 && imm != -1)
+		|| (len == 16 && (sljit_si)imm != 0 && (sljit_si)imm != -1));
+	uimm = (sljit_uw)imm;
+	while (1) {
+		if (len <= 0) {
+			SLJIT_ASSERT_STOP();
+			return 0;
+		}
+		mask = ((sljit_uw)1 << len) - 1;
+		if ((uimm & mask) != ((uimm >> len) & mask))
+			break;
+		len >>= 1;
+	}
+
+	len <<= 1;
+
+	negated = 0;
+	if (uimm & 0x1) {
+		negated = 1;
+		uimm = ~uimm;
+	}
+
+	if (len < 64)
+		uimm &= ((sljit_uw)1 << len) - 1;
+
+	/* Unsigned right shift. */
+	COUNT_TRAILING_ZERO(uimm, right);
+
+	/* Signed shift. We also know that the highest bit is set. */
+	imm = (sljit_sw)~uimm;
+	SLJIT_ASSERT(imm < 0);
+
+	COUNT_TRAILING_ZERO(imm, ones);
+
+	if (~imm)
+		return 0;
+
+	if (len == 64)
+		ins = 1 << 22;
+	else
+		ins = (0x3f - ((len << 1) - 1)) << 10;
+
+	if (negated)
+		return ins | ((len - ones - 1) << 10) | ((len - ones - right) << 16);
+
+	return ins | ((ones - 1) << 10) | ((len - right) << 16);
+}
+
+#undef COUNT_TRAILING_ZERO
+
+static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst, sljit_sw simm)
+{
+	sljit_uw imm = (sljit_uw)simm;
+	sljit_si i, zeros, ones, first;
+	sljit_ins bitmask;
+
+	if (imm <= 0xffff)
+		return push_inst(compiler, MOVZ | RD(dst) | (imm << 5));
+
+	if (simm >= -0x10000 && simm < 0)
+		return push_inst(compiler, MOVN | RD(dst) | ((~imm & 0xffff) << 5));
+
+	if (imm <= 0xffffffffl) {
+		if ((imm & 0xffff0000l) == 0xffff0000)
+			return push_inst(compiler, (MOVN ^ W_OP) | RD(dst) | ((~imm & 0xffff) << 5));
+		if ((imm & 0xffff) == 0xffff)
+			return push_inst(compiler, (MOVN ^ W_OP) | RD(dst) | ((~imm & 0xffff0000l) >> (16 - 5)) | (1 << 21));
+		bitmask = logical_imm(simm, 16);
+		if (bitmask != 0)
+			return push_inst(compiler, (ORRI ^ W_OP) | RD(dst) | RN(TMP_ZERO) | bitmask);
+	}
+	else {
+		bitmask = logical_imm(simm, 32);
+		if (bitmask != 0)
+			return push_inst(compiler, ORRI | RD(dst) | RN(TMP_ZERO) | bitmask);
+	}
+
+	if (imm <= 0xffffffffl) {
+		FAIL_IF(push_inst(compiler, MOVZ | RD(dst) | ((imm & 0xffff) << 5)));
+		return push_inst(compiler, MOVK | RD(dst) | ((imm & 0xffff0000l) >> (16 - 5)) | (1 << 21));
+	}
+
+	if (simm >= -0x100000000l && simm < 0) {
+		FAIL_IF(push_inst(compiler, MOVN | RD(dst) | ((~imm & 0xffff) << 5)));
+		return push_inst(compiler, MOVK | RD(dst) | ((imm & 0xffff0000l) >> (16 - 5)) | (1 << 21));
+	}
+
+	/* A large amount of number can be constructed from ORR and MOVx,
+	but computing them is costly. We don't  */
+
+	zeros = 0;
+	ones = 0;
+	for (i = 4; i > 0; i--) {
+		if ((simm & 0xffff) == 0)
+			zeros++;
+		if ((simm & 0xffff) == 0xffff)
+			ones++;
+		simm >>= 16;
+	}
+
+	simm = (sljit_sw)imm;
+	first = 1;
+	if (ones > zeros) {
+		simm = ~simm;
+		for (i = 0; i < 4; i++) {
+			if (!(simm & 0xffff)) {
+				simm >>= 16;
+				continue;
+			}
+			if (first) {
+				first = 0;
+				FAIL_IF(push_inst(compiler, MOVN | RD(dst) | ((simm & 0xffff) << 5) | (i << 21)));
+			}
+			else
+				FAIL_IF(push_inst(compiler, MOVK | RD(dst) | ((~simm & 0xffff) << 5) | (i << 21)));
+			simm >>= 16;
+		}
+		return SLJIT_SUCCESS;
+	}
+
+	for (i = 0; i < 4; i++) {
+		if (!(simm & 0xffff)) {
+			simm >>= 16;
+			continue;
+		}
+		if (first) {
+			first = 0;
+			FAIL_IF(push_inst(compiler, MOVZ | RD(dst) | ((simm & 0xffff) << 5) | (i << 21)));
+		}
+		else
+			FAIL_IF(push_inst(compiler, MOVK | RD(dst) | ((simm & 0xffff) << 5) | (i << 21)));
+		simm >>= 16;
+	}
+	return SLJIT_SUCCESS;
+}
+
+#define ARG1_IMM	0x0010000
+#define ARG2_IMM	0x0020000
+#define INT_OP		0x0040000
+#define SET_FLAGS	0x0080000
+#define UNUSED_RETURN	0x0100000
+#define SLOW_DEST	0x0200000
+#define SLOW_SRC1	0x0400000
+#define SLOW_SRC2	0x0800000
+
+#define CHECK_FLAGS(flag_bits) \
+	if (flags & SET_FLAGS) { \
+		inv_bits |= flag_bits; \
+		if (flags & UNUSED_RETURN) \
+			dst = TMP_ZERO; \
+	}
+
+static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, sljit_si dst, sljit_sw arg1, sljit_sw arg2)
+{
+	/* dst must be register, TMP_REG1
+	   arg1 must be register, TMP_REG1, imm
+	   arg2 must be register, TMP_REG2, imm */
+	sljit_ins inv_bits = (flags & INT_OP) ? (1 << 31) : 0;
+	sljit_ins inst_bits;
+	sljit_si op = (flags & 0xffff);
+	sljit_si reg;
+	sljit_sw imm, nimm;
+
+	if (SLJIT_UNLIKELY((flags & (ARG1_IMM | ARG2_IMM)) == (ARG1_IMM | ARG2_IMM))) {
+		/* Both are immediates. */
+		flags &= ~ARG1_IMM;
+		if (arg1 == 0 && op != SLJIT_ADD && op != SLJIT_SUB)
+			arg1 = TMP_ZERO;
+		else {
+			FAIL_IF(load_immediate(compiler, TMP_REG1, arg1));
+			arg1 = TMP_REG1;
+		}
+	}
+
+	if (flags & (ARG1_IMM | ARG2_IMM)) {
+		reg = (flags & ARG2_IMM) ? arg1 : arg2;
+		imm = (flags & ARG2_IMM) ? arg2 : arg1;
+
+		switch (op) {
+		case SLJIT_MUL:
+		case SLJIT_NEG:
+		case SLJIT_CLZ:
+		case SLJIT_ADDC:
+		case SLJIT_SUBC:
+			/* No form with immediate operand (except imm 0, which
+			is represented by a ZERO register). */
+			break;
+		case SLJIT_MOV:
+			SLJIT_ASSERT(!(flags & SET_FLAGS) && (flags & ARG2_IMM) && arg1 == TMP_REG1);
+			return load_immediate(compiler, dst, imm);
+		case SLJIT_NOT:
+			SLJIT_ASSERT(flags & ARG2_IMM);
+			FAIL_IF(load_immediate(compiler, dst, (flags & INT_OP) ? (~imm & 0xffffffff) : ~imm));
+			goto set_flags;
+		case SLJIT_SUB:
+			if (flags & ARG1_IMM)
+				break;
+			imm = -imm;
+			/* Fall through. */
+		case SLJIT_ADD:
+			if (imm == 0) {
+				CHECK_FLAGS(1 << 29);
+				return push_inst(compiler, ((op == SLJIT_ADD ? ADDI : SUBI) ^ inv_bits) | RD(dst) | RN(reg));
+			}
+			if (imm > 0 && imm <= 0xfff) {
+				CHECK_FLAGS(1 << 29);
+				return push_inst(compiler, (ADDI ^ inv_bits) | RD(dst) | RN(reg) | (imm << 10));
+			}
+			nimm = -imm;
+			if (nimm > 0 && nimm <= 0xfff) {
+				CHECK_FLAGS(1 << 29);
+				return push_inst(compiler, (SUBI ^ inv_bits) | RD(dst) | RN(reg) | (nimm << 10));
+			}
+			if (imm > 0 && imm <= 0xffffff && !(imm & 0xfff)) {
+				CHECK_FLAGS(1 << 29);
+				return push_inst(compiler, (ADDI ^ inv_bits) | RD(dst) | RN(reg) | ((imm >> 12) << 10) | (1 << 22));
+			}
+			if (nimm > 0 && nimm <= 0xffffff && !(nimm & 0xfff)) {
+				CHECK_FLAGS(1 << 29);
+				return push_inst(compiler, (SUBI ^ inv_bits) | RD(dst) | RN(reg) | ((nimm >> 12) << 10) | (1 << 22));
+			}
+			if (imm > 0 && imm <= 0xffffff && !(flags & SET_FLAGS)) {
+				FAIL_IF(push_inst(compiler, (ADDI ^ inv_bits) | RD(dst) | RN(reg) | ((imm >> 12) << 10) | (1 << 22)));
+				return push_inst(compiler, (ADDI ^ inv_bits) | RD(dst) | RN(dst) | ((imm & 0xfff) << 10));
+			}
+			if (nimm > 0 && nimm <= 0xffffff && !(flags & SET_FLAGS)) {
+				FAIL_IF(push_inst(compiler, (SUBI ^ inv_bits) | RD(dst) | RN(reg) | ((nimm >> 12) << 10) | (1 << 22)));
+				return push_inst(compiler, (SUBI ^ inv_bits) | RD(dst) | RN(dst) | ((nimm & 0xfff) << 10));
+			}
+			break;
+		case SLJIT_AND:
+			inst_bits = logical_imm(imm, LOGICAL_IMM_CHECK | ((flags & INT_OP) ? 16 : 32));
+			if (!inst_bits)
+				break;
+			CHECK_FLAGS(3 << 29);
+			return push_inst(compiler, (ANDI ^ inv_bits) | RD(dst) | RN(reg) | inst_bits);
+		case SLJIT_OR:
+		case SLJIT_XOR:
+			inst_bits = logical_imm(imm, LOGICAL_IMM_CHECK | ((flags & INT_OP) ? 16 : 32));
+			if (!inst_bits)
+				break;
+			if (op == SLJIT_OR)
+				inst_bits |= ORRI;
+			else
+				inst_bits |= EORI;
+			FAIL_IF(push_inst(compiler, (inst_bits ^ inv_bits) | RD(dst) | RN(reg)));
+			goto set_flags;
+		case SLJIT_SHL:
+			if (flags & ARG1_IMM)
+				break;
+			if (flags & INT_OP) {
+				imm &= 0x1f;
+				FAIL_IF(push_inst(compiler, (UBFM ^ inv_bits) | RD(dst) | RN(arg1) | ((-imm & 0x1f) << 16) | ((31 - imm) << 10)));
+			}
+			else {
+				imm &= 0x3f;
+				FAIL_IF(push_inst(compiler, (UBFM ^ inv_bits) | RD(dst) | RN(arg1) | (1 << 22) | ((-imm & 0x3f) << 16) | ((63 - imm) << 10)));
+			}
+			goto set_flags;
+		case SLJIT_LSHR:
+		case SLJIT_ASHR:
+			if (flags & ARG1_IMM)
+				break;
+			if (op == SLJIT_ASHR)
+				inv_bits |= 1 << 30;
+			if (flags & INT_OP) {
+				imm &= 0x1f;
+				FAIL_IF(push_inst(compiler, (UBFM ^ inv_bits) | RD(dst) | RN(arg1) | (imm << 16) | (31 << 10)));
+			}
+			else {
+				imm &= 0x3f;
+				FAIL_IF(push_inst(compiler, (UBFM ^ inv_bits) | RD(dst) | RN(arg1) | (1 << 22) | (imm << 16) | (63 << 10)));
+			}
+			goto set_flags;
+		default:
+			SLJIT_ASSERT_STOP();
+			break;
+		}
+
+		if (flags & ARG2_IMM) {
+			if (arg2 == 0)
+				arg2 = TMP_ZERO;
+			else {
+				FAIL_IF(load_immediate(compiler, TMP_REG2, arg2));
+				arg2 = TMP_REG2;
+			}
+		}
+		else {
+			if (arg1 == 0)
+				arg1 = TMP_ZERO;
+			else {
+				FAIL_IF(load_immediate(compiler, TMP_REG1, arg1));
+				arg1 = TMP_REG1;
+			}
+		}
+	}
+
+	/* Both arguments are registers. */
+	switch (op) {
+	case SLJIT_MOV:
+	case SLJIT_MOV_P:
+	case SLJIT_MOVU:
+	case SLJIT_MOVU_P:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		if (dst == arg2)
+			return SLJIT_SUCCESS;
+		return push_inst(compiler, ORR | RD(dst) | RN(TMP_ZERO) | RM(arg2));
+	case SLJIT_MOV_UB:
+	case SLJIT_MOVU_UB:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		return push_inst(compiler, (UBFM ^ (1 << 31)) | RD(dst) | RN(arg2) | (7 << 10));
+	case SLJIT_MOV_SB:
+	case SLJIT_MOVU_SB:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		if (!(flags & INT_OP))
+			inv_bits |= 1 << 22;
+		return push_inst(compiler, (SBFM ^ inv_bits) | RD(dst) | RN(arg2) | (7 << 10));
+	case SLJIT_MOV_UH:
+	case SLJIT_MOVU_UH:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		return push_inst(compiler, (UBFM ^ (1 << 31)) | RD(dst) | RN(arg2) | (15 << 10));
+	case SLJIT_MOV_SH:
+	case SLJIT_MOVU_SH:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		if (!(flags & INT_OP))
+			inv_bits |= 1 << 22;
+		return push_inst(compiler, (SBFM ^ inv_bits) | RD(dst) | RN(arg2) | (15 << 10));
+	case SLJIT_MOV_UI:
+	case SLJIT_MOVU_UI:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		if ((flags & INT_OP) && dst == arg2)
+			return SLJIT_SUCCESS;
+		return push_inst(compiler, (ORR ^ (1 << 31)) | RD(dst) | RN(TMP_ZERO) | RM(arg2));
+	case SLJIT_MOV_SI:
+	case SLJIT_MOVU_SI:
+		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		if ((flags & INT_OP) && dst == arg2)
+			return SLJIT_SUCCESS;
+		return push_inst(compiler, SBFM | (1 << 22) | RD(dst) | RN(arg2) | (31 << 10));
+	case SLJIT_NOT:
+		SLJIT_ASSERT(arg1 == TMP_REG1);
+		FAIL_IF(push_inst(compiler, (ORN ^ inv_bits) | RD(dst) | RN(TMP_ZERO) | RM(arg2)));
+		goto set_flags;
+	case SLJIT_NEG:
+		SLJIT_ASSERT(arg1 == TMP_REG1);
+		if (flags & SET_FLAGS)
+			inv_bits |= 1 << 29;
+		return push_inst(compiler, (SUB ^ inv_bits) | RD(dst) | RN(TMP_ZERO) | RM(arg2));
+	case SLJIT_CLZ:
+		SLJIT_ASSERT(arg1 == TMP_REG1);
+		FAIL_IF(push_inst(compiler, (CLZ ^ inv_bits) | RD(dst) | RN(arg2)));
+		goto set_flags;
+	case SLJIT_ADD:
+		CHECK_FLAGS(1 << 29);
+		return push_inst(compiler, (ADD ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
+	case SLJIT_ADDC:
+		CHECK_FLAGS(1 << 29);
+		return push_inst(compiler, (ADC ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
+	case SLJIT_SUB:
+		CHECK_FLAGS(1 << 29);
+		return push_inst(compiler, (SUB ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
+	case SLJIT_SUBC:
+		CHECK_FLAGS(1 << 29);
+		return push_inst(compiler, (SBC ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
+	case SLJIT_MUL:
+		if (!(flags & SET_FLAGS))
+			return push_inst(compiler, (MADD ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2) | RT2(TMP_ZERO));
+		if (flags & INT_OP) {
+			FAIL_IF(push_inst(compiler, SMADDL | RD(dst) | RN(arg1) | RM(arg2) | (31 << 10)));
+			FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG4) | RN(TMP_ZERO) | RM(dst) | (2 << 22) | (31 << 10)));
+			return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_REG4) | RM(dst) | (2 << 22) | (63 << 10));
+		}
+		FAIL_IF(push_inst(compiler, SMULH | RD(TMP_REG4) | RN(arg1) | RM(arg2)));
+		FAIL_IF(push_inst(compiler, MADD | RD(dst) | RN(arg1) | RM(arg2) | RT2(TMP_ZERO)));
+		return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_REG4) | RM(dst) | (2 << 22) | (63 << 10));
+	case SLJIT_AND:
+		CHECK_FLAGS(3 << 29);
+		return push_inst(compiler, (AND ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
+	case SLJIT_OR:
+		FAIL_IF(push_inst(compiler, (ORR ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2)));
+		goto set_flags;
+	case SLJIT_XOR:
+		FAIL_IF(push_inst(compiler, (EOR ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2)));
+		goto set_flags;
+	case SLJIT_SHL:
+		FAIL_IF(push_inst(compiler, (LSLV ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2)));
+		goto set_flags;
+	case SLJIT_LSHR:
+		FAIL_IF(push_inst(compiler, (LSRV ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2)));
+		goto set_flags;
+	case SLJIT_ASHR:
+		FAIL_IF(push_inst(compiler, (ASRV ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2)));
+		goto set_flags;
+	}
+
+	SLJIT_ASSERT_STOP();
+	return SLJIT_SUCCESS;
+
+set_flags:
+	if (flags & SET_FLAGS)
+		return push_inst(compiler, (SUBS ^ inv_bits) | RD(TMP_ZERO) | RN(dst) | RM(TMP_ZERO));
+	return SLJIT_SUCCESS;
+}
+
+#define STORE		0x01
+#define SIGNED		0x02
+
+#define UPDATE		0x04
+#define ARG_TEST	0x08
+
+#define BYTE_SIZE	0x000
+#define HALF_SIZE	0x100
+#define INT_SIZE	0x200
+#define WORD_SIZE	0x300
+
+#define MEM_SIZE_SHIFT(flags) ((flags) >> 8)
+
+static SLJIT_CONST sljit_ins sljit_mem_imm[4] = {
+/* u l */ 0x39400000 /* ldrb [reg,imm] */,
+/* u s */ 0x39000000 /* strb [reg,imm] */,
+/* s l */ 0x39800000 /* ldrsb [reg,imm] */,
+/* s s */ 0x39000000 /* strb [reg,imm] */,
+};
+
+static SLJIT_CONST sljit_ins sljit_mem_simm[4] = {
+/* u l */ 0x38400000 /* ldurb [reg,imm] */,
+/* u s */ 0x38000000 /* sturb [reg,imm] */,
+/* s l */ 0x38800000 /* ldursb [reg,imm] */,
+/* s s */ 0x38000000 /* sturb [reg,imm] */,
+};
+
+static SLJIT_CONST sljit_ins sljit_mem_pre_simm[4] = {
+/* u l */ 0x38400c00 /* ldrb [reg,imm]! */,
+/* u s */ 0x38000c00 /* strb [reg,imm]! */,
+/* s l */ 0x38800c00 /* ldrsb [reg,imm]! */,
+/* s s */ 0x38000c00 /* strb [reg,imm]! */,
+};
+
+static SLJIT_CONST sljit_ins sljit_mem_reg[4] = {
+/* u l */ 0x38606800 /* ldrb [reg,reg] */,
+/* u s */ 0x38206800 /* strb [reg,reg] */,
+/* s l */ 0x38a06800 /* ldrsb [reg,reg] */,
+/* s s */ 0x38206800 /* strb [reg,reg] */,
+};
+
+/* Helper function. Dst should be reg + value, using at most 1 instruction, flags does not set. */
+static sljit_si emit_set_delta(struct sljit_compiler *compiler, sljit_si dst, sljit_si reg, sljit_sw value)
+{
+	if (value >= 0) {
+		if (value <= 0xfff)
+			return push_inst(compiler, ADDI | RD(dst) | RN(reg) | (value << 10));
+		if (value <= 0xffffff && !(value & 0xfff))
+			return push_inst(compiler, ADDI | (1 << 22) | RD(dst) | RN(reg) | (value >> 2));
+	}
+	else {
+		value = -value;
+		if (value <= 0xfff)
+			return push_inst(compiler, SUBI | RD(dst) | RN(reg) | (value << 10));
+		if (value <= 0xffffff && !(value & 0xfff))
+			return push_inst(compiler, SUBI | (1 << 22) | RD(dst) | RN(reg) | (value >> 2));
+	}
+	return SLJIT_ERR_UNSUPPORTED;
+}
+
+/* Can perform an operation using at most 1 instruction. */
+static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg, sljit_sw argw)
+{
+	sljit_ui shift = MEM_SIZE_SHIFT(flags);
+
+	SLJIT_ASSERT(arg & SLJIT_MEM);
+
+	if (SLJIT_UNLIKELY(flags & UPDATE)) {
+		if ((arg & REG_MASK) && !(arg & OFFS_REG_MASK) && argw <= 255 && argw >= -256) {
+			if (SLJIT_UNLIKELY(flags & ARG_TEST))
+				return 1;
+
+			arg &= REG_MASK;
+			argw &= 0x1ff;
+			FAIL_IF(push_inst(compiler, sljit_mem_pre_simm[flags & 0x3]
+				| (shift << 30) | RT(reg) | RN(arg) | (argw << 12)));
+			return -1;
+		}
+		return 0;
+	}
+
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
+		argw &= 0x3;
+		if (argw && argw != shift)
+			return 0;
+
+		if (SLJIT_UNLIKELY(flags & ARG_TEST))
+			return 1;
+
+		FAIL_IF(push_inst(compiler, sljit_mem_reg[flags & 0x3] | (shift << 30) | RT(reg)
+			| RN(arg & REG_MASK) | RM(OFFS_REG(arg)) | (argw ? (1 << 12) : 0)));
+		return -1;
+	}
+
+	arg &= REG_MASK;
+	if (argw >= 0 && (argw >> shift) <= 0xfff && (argw & ((1 << shift) - 1)) == 0) {
+		if (SLJIT_UNLIKELY(flags & ARG_TEST))
+			return 1;
+
+		FAIL_IF(push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30)
+			| RT(reg) | RN(arg) | (argw << (10 - shift))));
+		return -1;
+	}
+
+	if (argw > 255 || argw < -256)
+		return 0;
+
+	if (SLJIT_UNLIKELY(flags & ARG_TEST))
+		return 1;
+
+	FAIL_IF(push_inst(compiler, sljit_mem_simm[flags & 0x3] | (shift << 30)
+		| RT(reg) | RN(arg) | ((argw & 0x1ff) << 12)));
+	return -1;
+}
+
+/* see getput_arg below.
+   Note: can_cache is called only for binary operators. Those
+   operators always uses word arguments without write back. */
+static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
+{
+	sljit_sw diff;
+	if ((arg & OFFS_REG_MASK) || !(next_arg & SLJIT_MEM))
+		return 0;
+
+	if (!(arg & REG_MASK)) {
+		diff = argw - next_argw;
+		if (diff <= 0xfff && diff >= -0xfff)
+			return 1;
+		return 0;
+	}
+
+	if (argw == next_argw)
+		return 1;
+
+	diff = argw - next_argw;
+	if (arg == next_arg && diff <= 0xfff && diff >= -0xfff)
+		return 1;
+
+	return 0;
+}
+
+/* Emit the necessary instructions. See can_cache above. */
+static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg,
+	sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
+{
+	sljit_ui shift = MEM_SIZE_SHIFT(flags);
+	sljit_si tmp_r, other_r;
+	sljit_sw diff;
+
+	SLJIT_ASSERT(arg & SLJIT_MEM);
+	if (!(next_arg & SLJIT_MEM)) {
+		next_arg = 0;
+		next_argw = 0;
+	}
+
+	tmp_r = (flags & STORE) ? TMP_REG3 : reg;
+
+	if (SLJIT_UNLIKELY((flags & UPDATE) && (arg & REG_MASK))) {
+		/* Update only applies if a base register exists. */
+		other_r = OFFS_REG(arg);
+		if (!other_r) {
+			other_r = arg & REG_MASK;
+			if (other_r != reg && argw >= 0 && argw <= 0xffffff) {
+				if ((argw & 0xfff) != 0)
+					FAIL_IF(push_inst(compiler, ADDI | RD(other_r) | RN(other_r) | ((argw & 0xfff) << 10)));
+				if (argw >> 12)
+					FAIL_IF(push_inst(compiler, ADDI | (1 << 22) | RD(other_r) | RN(other_r) | ((argw >> 12) << 10)));
+				return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(other_r));
+			}
+			else if (other_r != reg && argw < 0 && argw >= -0xffffff) {
+				argw = -argw;
+				if ((argw & 0xfff) != 0)
+					FAIL_IF(push_inst(compiler, SUBI | RD(other_r) | RN(other_r) | ((argw & 0xfff) << 10)));
+				if (argw >> 12)
+					FAIL_IF(push_inst(compiler, SUBI | (1 << 22) | RD(other_r) | RN(other_r) | ((argw >> 12) << 10)));
+				return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(other_r));
+			}
+
+			if (compiler->cache_arg == SLJIT_MEM) {
+				if (argw == compiler->cache_argw) {
+					other_r = TMP_REG3;
+					argw = 0;
+				}
+				else if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
+					FAIL_IF(compiler->error);
+					compiler->cache_argw = argw;
+					other_r = TMP_REG3;
+					argw = 0;
+				}
+			}
+
+			if (argw) {
+				FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
+				compiler->cache_arg = SLJIT_MEM;
+				compiler->cache_argw = argw;
+				other_r = TMP_REG3;
+				argw = 0;
+			}
+		}
+
+		/* No caching here. */
+		arg &= REG_MASK;
+		argw &= 0x3;
+		if (!argw || argw == shift) {
+			FAIL_IF(push_inst(compiler, sljit_mem_reg[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg) | RM(other_r) | (argw ? (1 << 12) : 0)));
+			return push_inst(compiler, ADD | RD(arg) | RN(arg) | RM(other_r) | (argw << 10));
+		}
+		if (arg != reg) {
+			FAIL_IF(push_inst(compiler, ADD | RD(arg) | RN(arg) | RM(other_r) | (argw << 10)));
+			return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg));
+		}
+		FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG4) | RN(arg) | RM(other_r) | (argw << 10)));
+		FAIL_IF(push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(TMP_REG4)));
+		return push_inst(compiler, ORR | RD(arg) | RN(TMP_ZERO) | RM(TMP_REG4));
+	}
+
+	if (arg & OFFS_REG_MASK) {
+		other_r = OFFS_REG(arg);
+		arg &= REG_MASK;
+		FAIL_IF(push_inst(compiler, ADD | RD(tmp_r) | RN(arg) | RM(other_r) | ((argw & 0x3) << 10)));
+		return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(tmp_r));
+	}
+
+	if (compiler->cache_arg == arg) {
+		diff = argw - compiler->cache_argw;
+		if (diff <= 255 && diff >= -256)
+			return push_inst(compiler, sljit_mem_simm[flags & 0x3] | (shift << 30)
+				| RT(reg) | RN(TMP_REG3) | ((diff & 0x1ff) << 12));
+		if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, diff) != SLJIT_ERR_UNSUPPORTED) {
+			FAIL_IF(compiler->error);
+			return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg));
+		}
+	}
+
+	if (argw >= 0 && argw <= 0xffffff && (argw & ((1 << shift) - 1)) == 0) {
+		FAIL_IF(push_inst(compiler, ADDI | (1 << 22) | RD(tmp_r) | RN(arg & REG_MASK) | ((argw >> 12) << 10)));
+		return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30)
+			| RT(reg) | RN(tmp_r) | ((argw & 0xfff) << (10 - shift)));
+	}
+
+	diff = argw - next_argw;
+	next_arg = (arg & REG_MASK) && (arg == next_arg) && diff <= 0xfff && diff >= -0xfff && diff != 0;
+	arg &= REG_MASK;
+
+	if (arg && compiler->cache_arg == SLJIT_MEM) {
+		if (compiler->cache_argw == argw)
+			return push_inst(compiler, sljit_mem_reg[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg) | RM(TMP_REG3));
+		if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
+			FAIL_IF(compiler->error);
+			compiler->cache_argw = argw;
+			return push_inst(compiler, sljit_mem_reg[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg) | RM(TMP_REG3));
+		}
+	}
+
+	compiler->cache_argw = argw;
+	if (next_arg && emit_set_delta(compiler, TMP_REG3, arg, argw) != SLJIT_ERR_UNSUPPORTED) {
+		FAIL_IF(compiler->error);
+		compiler->cache_arg = SLJIT_MEM | arg;
+		arg = 0;
+	}
+	else {
+		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
+		compiler->cache_arg = SLJIT_MEM;
+
+		if (next_arg) {
+			FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG3) | RN(TMP_REG3) | RM(arg)));
+			compiler->cache_arg = SLJIT_MEM | arg;
+			arg = 0;
+		}
+	}
+
+	if (arg)
+		return push_inst(compiler, sljit_mem_reg[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg) | RM(TMP_REG3));
+	return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(TMP_REG3));
+}
+
+static SLJIT_INLINE sljit_si emit_op_mem(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg, sljit_sw argw)
+{
+	if (getput_arg_fast(compiler, flags, reg, arg, argw))
+		return compiler->error;
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+	return getput_arg(compiler, flags, reg, arg, argw, 0, 0);
+}
+
+static SLJIT_INLINE sljit_si emit_op_mem2(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg1, sljit_sw arg1w, sljit_si arg2, sljit_sw arg2w)
+{
+	if (getput_arg_fast(compiler, flags, reg, arg1, arg1w))
+		return compiler->error;
+	return getput_arg(compiler, flags, reg, arg1, arg1w, arg2, arg2w);
+}
+
+/* --------------------------------------------------------------------- */
+/*  Entry, exit                                                          */
+/* --------------------------------------------------------------------- */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compiler, sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size)
+{
+	CHECK_ERROR();
+	check_sljit_emit_enter(compiler, args, scratches, saveds, local_size);
+
+	compiler->scratches = scratches;
+	compiler->saveds = saveds;
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	compiler->logical_local_size = local_size;
+#endif
+	compiler->locals_offset = (2 + saveds) * sizeof(sljit_sw);
+	local_size = (compiler->locals_offset + local_size + 15) & ~15;
+	compiler->local_size = local_size;
+
+	if (local_size <= (64 << 3))
+		FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR)
+			| RN(TMP_SP) | ((-(local_size >> 3) & 0x7f) << 15)));
+	else {
+		local_size -= (64 << 3);
+		if (local_size > 0xfff) {
+			FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
+			local_size &= 0xfff;
+		}
+		if (local_size)
+			FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+		FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR) | RN(TMP_SP) | (0x40 << 15)));
+	}
+
+	FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_LOCALS_REG) | RN(TMP_SP)));
+
+	if (saveds >= 2)
+		FAIL_IF(push_inst(compiler, STP | RT(SLJIT_SAVED_REG1) | RT2(SLJIT_SAVED_REG2) | RN(TMP_SP) | (2 << 15)));
+	if (saveds >= 4)
+		FAIL_IF(push_inst(compiler, STP | RT(SLJIT_SAVED_REG3) | RT2(SLJIT_SAVED_EREG1) | RN(TMP_SP) | (4 << 15)));
+	if (saveds == 1)
+		FAIL_IF(push_inst(compiler, STRI | RT(SLJIT_SAVED_REG1) | RN(TMP_SP) | (2 << 10)));
+	if (saveds == 3)
+		FAIL_IF(push_inst(compiler, STRI | RT(SLJIT_SAVED_REG3) | RN(TMP_SP) | (4 << 10)));
+	if (saveds == 5)
+		FAIL_IF(push_inst(compiler, STRI | RT(SLJIT_SAVED_EREG2) | RN(TMP_SP) | (6 << 10)));
+
+	if (args >= 1)
+		FAIL_IF(push_inst(compiler, ORR | RD(SLJIT_SAVED_REG1) | RN(TMP_ZERO) | RM(SLJIT_SCRATCH_REG1)));
+	if (args >= 2)
+		FAIL_IF(push_inst(compiler, ORR | RD(SLJIT_SAVED_REG2) | RN(TMP_ZERO) | RM(SLJIT_SCRATCH_REG2)));
+	if (args >= 3)
+		FAIL_IF(push_inst(compiler, ORR | RD(SLJIT_SAVED_REG3) | RN(TMP_ZERO) | RM(SLJIT_SCRATCH_REG3)));
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler, sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size)
+{
+	CHECK_ERROR_VOID();
+	check_sljit_set_context(compiler, args, scratches, saveds, local_size);
+
+	compiler->scratches = scratches;
+	compiler->saveds = saveds;
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	compiler->logical_local_size = local_size;
+#endif
+	compiler->locals_offset = (2 + saveds) * sizeof(sljit_sw);
+	compiler->local_size = (compiler->locals_offset + local_size + 15) & ~15;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
+{
+	sljit_si saveds, local_size;
+
+	CHECK_ERROR();
+	check_sljit_emit_return(compiler, op, src, srcw);
+
+	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
+
+	saveds = compiler->saveds;
+
+	if (saveds >= 2)
+		FAIL_IF(push_inst(compiler, LDP | RT(SLJIT_SAVED_REG1) | RT2(SLJIT_SAVED_REG2) | RN(TMP_SP) | (2 << 15)));
+	if (saveds >= 4)
+		FAIL_IF(push_inst(compiler, LDP | RT(SLJIT_SAVED_REG3) | RT2(SLJIT_SAVED_EREG1) | RN(TMP_SP) | (4 << 15)));
+	if (saveds == 1)
+		FAIL_IF(push_inst(compiler, LDRI | RT(SLJIT_SAVED_REG1) | RN(TMP_SP) | (2 << 10)));
+	if (saveds == 3)
+		FAIL_IF(push_inst(compiler, LDRI | RT(SLJIT_SAVED_REG3) | RN(TMP_SP) | (4 << 10)));
+	if (saveds == 5)
+		FAIL_IF(push_inst(compiler, LDRI | RT(SLJIT_SAVED_EREG2) | RN(TMP_SP) | (6 << 10)));
+
+	local_size = compiler->local_size;
+
+	if (local_size <= (62 << 3))
+		FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR)
+			| RN(TMP_SP) | (((local_size >> 3) & 0x7f) << 15)));
+	else {
+		FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR) | RN(TMP_SP) | (0x3e << 15)));
+		local_size -= (62 << 3);
+		if (local_size > 0xfff) {
+			FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
+			local_size &= 0xfff;
+		}
+		if (local_size)
+			FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+	}
+
+	FAIL_IF(push_inst(compiler, RET | RN(TMP_LR)));
+	return SLJIT_SUCCESS;
+}
+
+/* --------------------------------------------------------------------- */
+/*  Operators                                                            */
+/* --------------------------------------------------------------------- */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
+{
+	sljit_ins inv_bits = (op & SLJIT_INT_OP) ? (1 << 31) : 0;
+
+	CHECK_ERROR();
+	check_sljit_emit_op0(compiler, op);
+
+	op = GET_OPCODE(op);
+	switch (op) {
+	case SLJIT_BREAKPOINT:
+		return push_inst(compiler, BRK);
+	case SLJIT_NOP:
+		return push_inst(compiler, NOP);
+	case SLJIT_UMUL:
+	case SLJIT_SMUL:
+		FAIL_IF(push_inst(compiler, ORR | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_SCRATCH_REG1)));
+		FAIL_IF(push_inst(compiler, MADD | RD(SLJIT_SCRATCH_REG1) | RN(SLJIT_SCRATCH_REG1) | RM(SLJIT_SCRATCH_REG2) | RT2(TMP_ZERO)));
+		return push_inst(compiler, (op == SLJIT_SMUL ? SMULH : UMULH) | RD(SLJIT_SCRATCH_REG2) | RN(TMP_REG1) | RM(SLJIT_SCRATCH_REG2));
+	case SLJIT_UDIV:
+	case SLJIT_SDIV:
+		FAIL_IF(push_inst(compiler, (ORR ^ inv_bits) | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_SCRATCH_REG1)));
+		FAIL_IF(push_inst(compiler, ((op == SLJIT_SDIV ? SDIV : UDIV) ^ inv_bits) | RD(SLJIT_SCRATCH_REG1) | RN(SLJIT_SCRATCH_REG1) | RM(SLJIT_SCRATCH_REG2)));
+		FAIL_IF(push_inst(compiler, (MADD ^ inv_bits) | RD(SLJIT_SCRATCH_REG2) | RN(SLJIT_SCRATCH_REG1) | RM(SLJIT_SCRATCH_REG2) | RT2(TMP_ZERO)));
+		return push_inst(compiler, (SUB ^ inv_bits) | RD(SLJIT_SCRATCH_REG2) | RN(TMP_REG1) | RM(SLJIT_SCRATCH_REG2));
+	}
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src, sljit_sw srcw)
+{
+	sljit_si dst_r, flags, mem_flags;
+	sljit_si op_flags = GET_ALL_FLAGS(op);
+
+	CHECK_ERROR();
+	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+
+	dst_r = SLOW_IS_REG(dst) ? dst : TMP_REG1;
+
+	op = GET_OPCODE(op);
+	if (op >= SLJIT_MOV && op <= SLJIT_MOVU_P) {
+		switch (op) {
+		case SLJIT_MOV:
+		case SLJIT_MOV_P:
+			flags = WORD_SIZE;
+			break;
+		case SLJIT_MOV_UB:
+			flags = BYTE_SIZE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_ub)srcw;
+			break;
+		case SLJIT_MOV_SB:
+			flags = BYTE_SIZE | SIGNED;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_sb)srcw;
+			break;
+		case SLJIT_MOV_UH:
+			flags = HALF_SIZE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_uh)srcw;
+			break;
+		case SLJIT_MOV_SH:
+			flags = HALF_SIZE | SIGNED;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_sh)srcw;
+			break;
+		case SLJIT_MOV_UI:
+			flags = INT_SIZE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_ui)srcw;
+			break;
+		case SLJIT_MOV_SI:
+			flags = INT_SIZE | SIGNED;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_si)srcw;
+			break;
+		case SLJIT_MOVU:
+		case SLJIT_MOVU_P:
+			flags = WORD_SIZE | UPDATE;
+			break;
+		case SLJIT_MOVU_UB:
+			flags = BYTE_SIZE | UPDATE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_ub)srcw;
+			break;
+		case SLJIT_MOVU_SB:
+			flags = BYTE_SIZE | SIGNED | UPDATE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_sb)srcw;
+			break;
+		case SLJIT_MOVU_UH:
+			flags = HALF_SIZE | UPDATE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_uh)srcw;
+			break;
+		case SLJIT_MOVU_SH:
+			flags = HALF_SIZE | SIGNED | UPDATE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_sh)srcw;
+			break;
+		case SLJIT_MOVU_UI:
+			flags = INT_SIZE | UPDATE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_ui)srcw;
+			break;
+		case SLJIT_MOVU_SI:
+			flags = INT_SIZE | SIGNED | UPDATE;
+			if (src & SLJIT_IMM)
+				srcw = (sljit_si)srcw;
+			break;
+		default:
+			SLJIT_ASSERT_STOP();
+			flags = 0;
+			break;
+		}
+
+		if (src & SLJIT_IMM)
+			FAIL_IF(emit_op_imm(compiler, SLJIT_MOV | ARG2_IMM, dst_r, TMP_REG1, srcw));
+		else if (src & SLJIT_MEM) {
+			if (getput_arg_fast(compiler, flags, dst_r, src, srcw))
+				FAIL_IF(compiler->error);
+			else
+				FAIL_IF(getput_arg(compiler, flags, dst_r, src, srcw, dst, dstw));
+		} else {
+			if (dst_r != TMP_REG1)
+				return emit_op_imm(compiler, op | ((op_flags & SLJIT_INT_OP) ? INT_OP : 0), dst_r, TMP_REG1, src);
+			dst_r = src;
+		}
+
+		if (dst & SLJIT_MEM) {
+			if (getput_arg_fast(compiler, flags | STORE, dst_r, dst, dstw))
+				return compiler->error;
+			else
+				return getput_arg(compiler, flags | STORE, dst_r, dst, dstw, 0, 0);
+		}
+		return SLJIT_SUCCESS;
+	}
+
+	flags = GET_FLAGS(op_flags) ? SET_FLAGS : 0;
+	mem_flags = WORD_SIZE;
+	if (op_flags & SLJIT_INT_OP) {
+		flags |= INT_OP;
+		mem_flags = INT_SIZE;
+	}
+
+	if (dst == SLJIT_UNUSED)
+		flags |= UNUSED_RETURN;
+
+	if (src & SLJIT_MEM) {
+		if (getput_arg_fast(compiler, mem_flags, TMP_REG2, src, srcw))
+			FAIL_IF(compiler->error);
+		else
+			FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG2, src, srcw, dst, dstw));
+		src = TMP_REG2;
+	}
+
+	if (src & SLJIT_IMM) {
+		flags |= ARG2_IMM;
+		if (op_flags & SLJIT_INT_OP)
+			srcw = (sljit_si)srcw;
+	} else
+		srcw = src;
+
+	emit_op_imm(compiler, flags | op, dst_r, TMP_REG1, srcw);
+
+	if (dst & SLJIT_MEM) {
+		if (getput_arg_fast(compiler, mem_flags | STORE, dst_r, dst, dstw))
+			return compiler->error;
+		else
+			return getput_arg(compiler, mem_flags | STORE, dst_r, dst, dstw, 0, 0);
+	}
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src1, sljit_sw src1w,
+	sljit_si src2, sljit_sw src2w)
+{
+	sljit_si dst_r, flags, mem_flags;
+
+	CHECK_ERROR();
+	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+	ADJUST_LOCAL_OFFSET(src1, src1w);
+	ADJUST_LOCAL_OFFSET(src2, src2w);
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+
+	dst_r = SLOW_IS_REG(dst) ? dst : TMP_REG1;
+	flags = GET_FLAGS(op) ? SET_FLAGS : 0;
+	mem_flags = WORD_SIZE;
+	if (op & SLJIT_INT_OP) {
+		flags |= INT_OP;
+		mem_flags = INT_SIZE;
+	}
+
+	if (dst == SLJIT_UNUSED)
+		flags |= UNUSED_RETURN;
+
+	if ((dst & SLJIT_MEM) && !getput_arg_fast(compiler, mem_flags | STORE | ARG_TEST, TMP_REG1, dst, dstw))
+		flags |= SLOW_DEST;
+
+	if (src1 & SLJIT_MEM) {
+		if (getput_arg_fast(compiler, mem_flags, TMP_REG1, src1, src1w))
+			FAIL_IF(compiler->error);
+		else
+			flags |= SLOW_SRC1;
+	}
+	if (src2 & SLJIT_MEM) {
+		if (getput_arg_fast(compiler, mem_flags, TMP_REG2, src2, src2w))
+			FAIL_IF(compiler->error);
+		else
+			flags |= SLOW_SRC2;
+	}
+
+	if ((flags & (SLOW_SRC1 | SLOW_SRC2)) == (SLOW_SRC1 | SLOW_SRC2)) {
+		if (!can_cache(src1, src1w, src2, src2w) && can_cache(src1, src1w, dst, dstw)) {
+			FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG2, src2, src2w, src1, src1w));
+			FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG1, src1, src1w, dst, dstw));
+		}
+		else {
+			FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG1, src1, src1w, src2, src2w));
+			FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG2, src2, src2w, dst, dstw));
+		}
+	}
+	else if (flags & SLOW_SRC1)
+		FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG1, src1, src1w, dst, dstw));
+	else if (flags & SLOW_SRC2)
+		FAIL_IF(getput_arg(compiler, mem_flags, TMP_REG2, src2, src2w, dst, dstw));
+
+	if (src1 & SLJIT_MEM)
+		src1 = TMP_REG1;
+	if (src2 & SLJIT_MEM)
+		src2 = TMP_REG2;
+
+	if (src1 & SLJIT_IMM)
+		flags |= ARG1_IMM;
+	else
+		src1w = src1;
+	if (src2 & SLJIT_IMM)
+		flags |= ARG2_IMM;
+	else
+		src2w = src2;
+
+	emit_op_imm(compiler, flags | GET_OPCODE(op), dst_r, src1w, src2w);
+
+	if (dst & SLJIT_MEM) {
+		if (!(flags & SLOW_DEST)) {
+			getput_arg_fast(compiler, mem_flags | STORE, dst_r, dst, dstw);
+			return compiler->error;
+		}
+		return getput_arg(compiler, mem_flags | STORE, TMP_REG1, dst, dstw, 0, 0);
+	}
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
+{
+	check_sljit_get_register_index(reg);
+	return reg_map[reg];
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
+{
+	check_sljit_get_float_register_index(reg);
+	return reg;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *compiler,
+	void *instruction, sljit_si size)
+{
+	CHECK_ERROR();
+	check_sljit_emit_op_custom(compiler, instruction, size);
+	SLJIT_ASSERT(size == 4);
+
+	return push_inst(compiler, *(sljit_ins*)instruction);
+}
+
+/* --------------------------------------------------------------------- */
+/*  Floating point operators                                             */
+/* --------------------------------------------------------------------- */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
+{
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
+#else
+	/* Available by default. */
+	return 1;
+#endif
+}
+
+static sljit_si emit_fop_mem(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg, sljit_sw argw)
+{
+	sljit_ui shift = MEM_SIZE_SHIFT(flags);
+	sljit_ins ins_bits = (shift << 30);
+	sljit_si other_r;
+	sljit_sw diff;
+
+	SLJIT_ASSERT(arg & SLJIT_MEM);
+
+	if (!(flags & STORE))
+		ins_bits |= 1 << 22;
+
+	if (arg & OFFS_REG_MASK) {
+		argw &= 3;
+		if (!argw || argw == shift)
+			return push_inst(compiler, STR_FR | ins_bits | VT(reg)
+				| RN(arg & REG_MASK) | RM(OFFS_REG(arg)) | (argw ? (1 << 12) : 0));
+		other_r = OFFS_REG(arg);
+		arg &= REG_MASK;
+		FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG1) | RN(arg) | RM(other_r) | (argw << 10)));
+		arg = TMP_REG1;
+		argw = 0;
+	}
+
+	arg &= REG_MASK;
+	if (arg && argw >= 0 && ((argw >> shift) <= 0xfff) && (argw & ((1 << shift) - 1)) == 0)
+		return push_inst(compiler, STR_FI | ins_bits | VT(reg) | RN(arg) | (argw << (10 - shift)));
+
+	if (arg && argw <= 255 && argw >= -256)
+		return push_inst(compiler, STUR_FI | ins_bits | VT(reg) | RN(arg) | ((argw & 0x1ff) << 12));
+
+	/* Slow cases */
+	if (compiler->cache_arg == SLJIT_MEM && argw != compiler->cache_argw) {
+		diff = argw - compiler->cache_argw;
+		if (!arg && diff <= 255 && diff >= -256)
+			return push_inst(compiler, STUR_FI | ins_bits | VT(reg) | RN(TMP_REG3) | ((diff & 0x1ff) << 12));
+		if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
+			FAIL_IF(compiler->error);
+			compiler->cache_argw = argw;
+		}
+	}
+
+	if (compiler->cache_arg != SLJIT_MEM || argw != compiler->cache_argw) {
+		compiler->cache_arg = SLJIT_MEM;
+		compiler->cache_argw = argw;
+		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
+	}
+
+	if (arg & REG_MASK)
+		return push_inst(compiler, STR_FR | ins_bits | VT(reg) | RN(arg) | RM(TMP_REG3));
+	return push_inst(compiler, STR_FI | ins_bits | VT(reg) | RN(TMP_REG3));
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src, sljit_sw srcw)
+{
+	sljit_si dst_r, mem_flags = (op & SLJIT_SINGLE_OP) ? INT_SIZE : WORD_SIZE;
+	sljit_ins inv_bits = (op & SLJIT_SINGLE_OP) ? (1 << 22) : 0;
+
+	CHECK_ERROR();
+	check_sljit_emit_fop1(compiler, op, dst, dstw, src, srcw);
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+
+	if (GET_OPCODE(op) == SLJIT_CMPD) {
+		if (dst & SLJIT_MEM) {
+			emit_fop_mem(compiler, mem_flags, TMP_FREG1, dst, dstw);
+			dst = TMP_FREG1;
+		}
+		if (src & SLJIT_MEM) {
+			emit_fop_mem(compiler, mem_flags, TMP_FREG2, src, srcw);
+			src = TMP_FREG2;
+		}
+		return push_inst(compiler, (FCMP ^ inv_bits) | VN(dst) | VM(src));
+	}
+
+	dst_r = (dst <= REG_MASK) ? dst : TMP_FREG1;
+	if (src & SLJIT_MEM) {
+		emit_fop_mem(compiler, mem_flags, dst_r, src, srcw);
+		src = dst_r;
+	}
+
+	switch (GET_OPCODE(op)) {
+	case SLJIT_MOVD:
+		if (src != dst_r)
+			FAIL_IF(push_inst(compiler, (FMOV ^ inv_bits) | VD(dst_r) | VN(src)));
+		break;
+	case SLJIT_NEGD:
+		FAIL_IF(push_inst(compiler, (FNEG ^ inv_bits) | VD(dst_r) | VN(src)));
+		break;
+	case SLJIT_ABSD:
+		FAIL_IF(push_inst(compiler, (FABS ^ inv_bits) | VD(dst_r) | VN(src)));
+		break;
+	}
+
+	if (!(dst & SLJIT_MEM))
+		return SLJIT_SUCCESS;
+	return emit_fop_mem(compiler, mem_flags | STORE, TMP_FREG1, dst, dstw);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src1, sljit_sw src1w,
+	sljit_si src2, sljit_sw src2w)
+{
+	sljit_si dst_r, mem_flags = (op & SLJIT_SINGLE_OP) ? INT_SIZE : WORD_SIZE;
+	sljit_ins inv_bits = (op & SLJIT_SINGLE_OP) ? (1 << 22) : 0;
+
+	CHECK_ERROR();
+	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+
+	dst_r = (dst <= REG_MASK) ? dst : TMP_FREG1;
+	if (src1 & SLJIT_MEM) {
+		emit_fop_mem(compiler, mem_flags, TMP_FREG1, src1, src1w);
+		src1 = TMP_FREG1;
+	}
+	if (src2 & SLJIT_MEM) {
+		emit_fop_mem(compiler, mem_flags, TMP_FREG2, src2, src2w);
+		src2 = TMP_FREG2;
+	}
+
+	switch (GET_OPCODE(op)) {
+	case SLJIT_ADDD:
+		FAIL_IF(push_inst(compiler, (FADD ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
+		break;
+	case SLJIT_SUBD:
+		FAIL_IF(push_inst(compiler, (FSUB ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
+		break;
+	case SLJIT_MULD:
+		FAIL_IF(push_inst(compiler, (FMUL ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
+		break;
+	case SLJIT_DIVD:
+		FAIL_IF(push_inst(compiler, (FDIV ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
+		break;
+	}
+
+	if (!(dst & SLJIT_MEM))
+		return SLJIT_SUCCESS;
+	return emit_fop_mem(compiler, mem_flags | STORE, TMP_FREG1, dst, dstw);
+}
+
+/* --------------------------------------------------------------------- */
+/*  Other instructions                                                   */
+/* --------------------------------------------------------------------- */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
+{
+	CHECK_ERROR();
+	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+
+	/* For UNUSED dst. Uncommon, but possible. */
+	if (dst == SLJIT_UNUSED)
+		return SLJIT_SUCCESS;
+
+	if (dst <= REG_MASK)
+		return push_inst(compiler, ORR | RD(dst) | RN(TMP_ZERO) | RM(TMP_LR));
+
+	/* Memory. */
+	return emit_op_mem(compiler, WORD_SIZE | STORE, TMP_LR, dst, dstw);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
+{
+	CHECK_ERROR();
+	check_sljit_emit_fast_return(compiler, src, srcw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	if (src <= REG_MASK)
+		FAIL_IF(push_inst(compiler, ORR | RD(TMP_LR) | RN(TMP_ZERO) | RM(src)));
+	else if (src & SLJIT_MEM)
+		FAIL_IF(emit_op_mem(compiler, WORD_SIZE, TMP_LR, src, srcw));
+	else if (src & SLJIT_IMM)
+		FAIL_IF(load_immediate(compiler, TMP_LR, srcw));
+
+	return push_inst(compiler, RET | RN(TMP_LR));
+}
+
+/* --------------------------------------------------------------------- */
+/*  Conditional instructions                                             */
+/* --------------------------------------------------------------------- */
+
+static sljit_uw get_cc(sljit_si type)
+{
+	switch (type) {
+	case SLJIT_C_EQUAL:
+	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_C_FLOAT_EQUAL:
+		return 0x1;
+
+	case SLJIT_C_NOT_EQUAL:
+	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_C_FLOAT_NOT_EQUAL:
+		return 0x0;
+
+	case SLJIT_C_LESS:
+	case SLJIT_C_FLOAT_LESS:
+		return 0x2;
+
+	case SLJIT_C_GREATER_EQUAL:
+	case SLJIT_C_FLOAT_GREATER_EQUAL:
+		return 0x3;
+
+	case SLJIT_C_GREATER:
+	case SLJIT_C_FLOAT_GREATER:
+		return 0x9;
+
+	case SLJIT_C_LESS_EQUAL:
+	case SLJIT_C_FLOAT_LESS_EQUAL:
+		return 0x8;
+
+	case SLJIT_C_SIG_LESS:
+		return 0xa;
+
+	case SLJIT_C_SIG_GREATER_EQUAL:
+		return 0xb;
+
+	case SLJIT_C_SIG_GREATER:
+		return 0xd;
+
+	case SLJIT_C_SIG_LESS_EQUAL:
+		return 0xc;
+
+	case SLJIT_C_OVERFLOW:
+	case SLJIT_C_FLOAT_UNORDERED:
+		return 0x7;
+
+	case SLJIT_C_NOT_OVERFLOW:
+	case SLJIT_C_FLOAT_ORDERED:
+		return 0x6;
+
+	default:
+		SLJIT_ASSERT_STOP();
+		return 0xe;
+	}
+}
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compiler *compiler)
+{
+	struct sljit_label *label;
+
+	CHECK_ERROR_PTR();
+	check_sljit_emit_label(compiler);
+
+	if (compiler->last_label && compiler->last_label->size == compiler->size)
+		return compiler->last_label;
+
+	label = (struct sljit_label*)ensure_abuf(compiler, sizeof(struct sljit_label));
+	PTR_FAIL_IF(!label);
+	set_label(label, compiler);
+	return label;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
+{
+	struct sljit_jump *jump;
+
+	CHECK_ERROR_PTR();
+	check_sljit_emit_jump(compiler, type);
+
+	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
+	PTR_FAIL_IF(!jump);
+	set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
+	type &= 0xff;
+
+	if (type < SLJIT_JUMP) {
+		jump->flags |= IS_COND;
+		PTR_FAIL_IF(push_inst(compiler, B_CC | (6 << 5) | get_cc(type)));
+	}
+	else if (type >= SLJIT_FAST_CALL)
+		jump->flags |= IS_BL;
+
+	PTR_FAIL_IF(emit_imm64_const(compiler, TMP_REG1, 0));
+	jump->addr = compiler->size;
+	PTR_FAIL_IF(push_inst(compiler, ((type >= SLJIT_FAST_CALL) ? BLR : BR) | RN(TMP_REG1)));
+
+	return jump;
+}
+
+static SLJIT_INLINE struct sljit_jump* emit_cmp_to0(struct sljit_compiler *compiler, sljit_si type,
+	sljit_si src, sljit_sw srcw)
+{
+	struct sljit_jump *jump;
+	sljit_ins inv_bits = (type & SLJIT_INT_OP) ? (1 << 31) : 0;
+
+	SLJIT_ASSERT((type & 0xff) == SLJIT_C_EQUAL || (type & 0xff) == SLJIT_C_NOT_EQUAL);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
+	PTR_FAIL_IF(!jump);
+	set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
+	jump->flags |= IS_CBZ | IS_COND;
+
+	if (src & SLJIT_MEM) {
+		PTR_FAIL_IF(emit_op_mem(compiler, inv_bits ? INT_SIZE : WORD_SIZE, TMP_REG1, src, srcw));
+		src = TMP_REG1;
+	}
+	else if (src & SLJIT_IMM) {
+		PTR_FAIL_IF(load_immediate(compiler, TMP_REG1, srcw));
+		src = TMP_REG1;
+	}
+	SLJIT_ASSERT(FAST_IS_REG(src));
+
+	if ((type & 0xff) == SLJIT_C_EQUAL)
+		inv_bits |= 1 << 24;
+
+	PTR_FAIL_IF(push_inst(compiler, (CBZ ^ inv_bits) | (6 << 5) | RT(src)));
+	PTR_FAIL_IF(emit_imm64_const(compiler, TMP_REG1, 0));
+	jump->addr = compiler->size;
+	PTR_FAIL_IF(push_inst(compiler, BR | RN(TMP_REG1)));
+	return jump;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw)
+{
+	struct sljit_jump *jump;
+
+	CHECK_ERROR();
+	check_sljit_emit_ijump(compiler, type, src, srcw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	/* In ARM, we don't need to touch the arguments. */
+	if (!(src & SLJIT_IMM)) {
+		if (src & SLJIT_MEM) {
+			FAIL_IF(emit_op_mem(compiler, WORD_SIZE, TMP_REG1, src, srcw));
+			src = TMP_REG1;
+		}
+		return push_inst(compiler, ((type >= SLJIT_FAST_CALL) ? BLR : BR) | RN(src));
+	}
+
+	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
+	FAIL_IF(!jump);
+	set_jump(jump, compiler, JUMP_ADDR | ((type >= SLJIT_FAST_CALL) ? IS_BL : 0));
+	jump->u.target = srcw;
+
+	FAIL_IF(emit_imm64_const(compiler, TMP_REG1, 0));
+	jump->addr = compiler->size;
+	return push_inst(compiler, ((type >= SLJIT_FAST_CALL) ? BLR : BR) | RN(TMP_REG1));
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src, sljit_sw srcw,
+	sljit_si type)
+{
+	sljit_si dst_r, flags, mem_flags;
+	sljit_ins cc;
+
+	CHECK_ERROR();
+	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	if (dst == SLJIT_UNUSED)
+		return SLJIT_SUCCESS;
+
+	cc = get_cc(type);
+	dst_r = (dst <= REG_MASK) ? dst : TMP_REG1;
+
+	if (GET_OPCODE(op) < SLJIT_ADD) {
+		FAIL_IF(push_inst(compiler, CSINC | (cc << 12) | RD(dst_r) | RN(TMP_ZERO) | RM(TMP_ZERO)));
+		if (dst_r != TMP_REG1)
+			return SLJIT_SUCCESS;
+		return emit_op_mem(compiler, (GET_OPCODE(op) == SLJIT_MOV ? WORD_SIZE : INT_SIZE) | STORE, TMP_REG1, dst, dstw);
+	}
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+	flags = GET_FLAGS(op) ? SET_FLAGS : 0;
+	mem_flags = WORD_SIZE;
+	if (op & SLJIT_INT_OP) {
+		flags |= INT_OP;
+		mem_flags = INT_SIZE;
+	}
+
+	if (src & SLJIT_MEM) {
+		FAIL_IF(emit_op_mem2(compiler, mem_flags, TMP_REG1, src, srcw, dst, dstw));
+		src = TMP_REG1;
+		srcw = 0;
+	} else if (src & SLJIT_IMM)
+		flags |= ARG1_IMM;
+
+	FAIL_IF(push_inst(compiler, CSINC | (cc << 12) | RD(TMP_REG2) | RN(TMP_ZERO) | RM(TMP_ZERO)));
+	emit_op_imm(compiler, flags | GET_OPCODE(op), dst_r, src, TMP_REG2);
+
+	if (dst_r != TMP_REG1)
+		return SLJIT_SUCCESS;
+	return emit_op_mem2(compiler, mem_flags | STORE, TMP_REG1, dst, dstw, 0, 0);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
+{
+	struct sljit_const *const_;
+	sljit_si dst_r;
+
+	CHECK_ERROR_PTR();
+	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+
+	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
+	PTR_FAIL_IF(!const_);
+	set_const(const_, compiler);
+
+	dst_r = SLOW_IS_REG(dst) ? dst : TMP_REG1;
+	PTR_FAIL_IF(emit_imm64_const(compiler, dst_r, init_value));
+
+	if (dst & SLJIT_MEM)
+		PTR_FAIL_IF(emit_op_mem(compiler, WORD_SIZE | STORE, dst_r, dst, dstw));
+	return const_;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
+{
+	sljit_ins* inst = (sljit_ins*)addr;
+	modify_imm64_const(inst, new_addr);
+	SLJIT_CACHE_FLUSH(inst, inst + 4);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
+{
+	sljit_ins* inst = (sljit_ins*)addr;
+	modify_imm64_const(inst, new_constant);
+	SLJIT_CACHE_FLUSH(inst, inst + 4);
+}
diff --git a/src/3rdparty/pcre/sljit/sljitNativeARM_Thumb2.c b/src/3rdparty/pcre/sljit/sljitNativeARM_T2_32.c
index 74ec83177d..682f964e35 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeARM_Thumb2.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeARM_T2_32.c
@@ -207,7 +207,7 @@ static SLJIT_INLINE sljit_si emit_imm32_const(struct sljit_compiler *compiler, s
 		COPY_BITS(imm, 12 + 16, 16, 4) | COPY_BITS(imm, 11 + 16, 26, 1) | COPY_BITS(imm, 8 + 16, 12, 3) | ((imm & 0xff0000) >> 16));
 }
 
-static SLJIT_INLINE void modify_imm32_const(sljit_uh* inst, sljit_uw new_imm)
+static SLJIT_INLINE void modify_imm32_const(sljit_uh *inst, sljit_uw new_imm)
 {
 	sljit_si dst = inst[1] & 0x0f00;
 	SLJIT_ASSERT(((inst[0] & 0xfbf0) == (MOVW >> 16)) && ((inst[2] & 0xfbf0) == (MOVT >> 16)) && dst == (inst[3] & 0x0f00));
@@ -238,33 +238,33 @@ static SLJIT_INLINE sljit_si detect_jump_type(struct sljit_jump *jump, sljit_uh
 	if (jump->flags & IS_COND) {
 		SLJIT_ASSERT(!(jump->flags & IS_BL));
 		if (diff <= 127 && diff >= -128) {
-			jump->flags |= B_TYPE1;
+			jump->flags |= PATCH_TYPE1;
 			return 5;
 		}
 		if (diff <= 524287 && diff >= -524288) {
-			jump->flags |= B_TYPE2;
+			jump->flags |= PATCH_TYPE2;
 			return 4;
 		}
 		/* +1 comes from the prefix IT instruction. */
 		diff--;
 		if (diff <= 8388607 && diff >= -8388608) {
-			jump->flags |= B_TYPE3;
+			jump->flags |= PATCH_TYPE3;
 			return 3;
 		}
 	}
 	else if (jump->flags & IS_BL) {
 		if (diff <= 8388607 && diff >= -8388608) {
-			jump->flags |= BL_TYPE6;
+			jump->flags |= PATCH_BL;
 			return 3;
 		}
 	}
 	else {
 		if (diff <= 1023 && diff >= -1024) {
-			jump->flags |= B_TYPE4;
+			jump->flags |= PATCH_TYPE4;
 			return 4;
 		}
 		if (diff <= 8388607 && diff >= -8388608) {
-			jump->flags |= B_TYPE5;
+			jump->flags |= PATCH_TYPE5;
 			return 3;
 		}
 	}
@@ -272,15 +272,6 @@ static SLJIT_INLINE sljit_si detect_jump_type(struct sljit_jump *jump, sljit_uh
 	return 0;
 }
 
-static SLJIT_INLINE void inline_set_jump_addr(sljit_uw addr, sljit_uw new_addr, sljit_si flush)
-{
-	sljit_uh* inst = (sljit_uh*)addr;
-	modify_imm32_const(inst, new_addr);
-	if (flush) {
-		SLJIT_CACHE_FLUSH(inst, inst + 3);
-	}
-}
-
 static SLJIT_INLINE void set_jump_instruction(struct sljit_jump *jump)
 {
 	sljit_si type = (jump->flags >> 4) & 0xf;
@@ -289,7 +280,7 @@ static SLJIT_INLINE void set_jump_instruction(struct sljit_jump *jump)
 	sljit_si s, j1, j2;
 
 	if (SLJIT_UNLIKELY(type == 0)) {
-		inline_set_jump_addr(jump->addr, (jump->flags & JUMP_LABEL) ? jump->u.label->addr : jump->u.target, 0);
+		modify_imm32_const((sljit_uh*)jump->addr, (jump->flags & JUMP_LABEL) ? jump->u.label->addr : jump->u.target);
 		return;
 	}
 
@@ -425,6 +416,10 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 	return (void*)((sljit_uw)code | 0x1);
 }
 
+/* --------------------------------------------------------------------- */
+/*  Core code generator functions.                                       */
+/* --------------------------------------------------------------------- */
+
 #define INVALID_IMM	0x80000000
 static sljit_uw get_imm(sljit_uw imm)
 {
@@ -502,7 +497,6 @@ static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst, sl
 #define ARG1_IMM	0x0010000
 #define ARG2_IMM	0x0020000
 #define KEEP_FLAGS	0x0040000
-#define SET_MULOV	0x0080000
 /* SET_FLAGS must be 0x100000 as it is also the value of S bit (can be used for optimization). */
 #define SET_FLAGS	0x0100000
 #define UNUSED_RETURN	0x0200000
@@ -516,7 +510,7 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
 	   arg1 must be register, TMP_REG1, imm
 	   arg2 must be register, TMP_REG2, imm */
 	sljit_si reg;
-	sljit_uw imm, negated_imm;
+	sljit_uw imm, nimm;
 
 	if (SLJIT_UNLIKELY((flags & (ARG1_IMM | ARG2_IMM)) == (ARG1_IMM | ARG2_IMM))) {
 		/* Both are immediates. */
@@ -530,6 +524,10 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
 		imm = (flags & ARG2_IMM) ? arg2 : arg1;
 
 		switch (flags & 0xffff) {
+		case SLJIT_CLZ:
+		case SLJIT_MUL:
+			/* No form with immediate operand. */
+			break;
 		case SLJIT_MOV:
 			SLJIT_ASSERT(!(flags & SET_FLAGS) && (flags & ARG2_IMM) && arg1 == TMP_REG1);
 			return load_immediate(compiler, dst, imm);
@@ -537,30 +535,27 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
 			if (!(flags & SET_FLAGS))
 				return load_immediate(compiler, dst, ~imm);
 			/* Since the flags should be set, we just fallback to the register mode.
-			   Although I could do some clever things here, "NOT IMM" does not worth the efforts. */
-			break;
-		case SLJIT_CLZ:
-			/* No form with immediate operand. */
+			   Although some clever things could be done here, "NOT IMM" does not worth the efforts. */
 			break;
 		case SLJIT_ADD:
-			negated_imm = (sljit_uw)-(sljit_sw)imm;
+			nimm = -imm;
 			if (!(flags & KEEP_FLAGS) && IS_2_LO_REGS(reg, dst)) {
 				if (imm <= 0x7)
 					return push_inst16(compiler, ADDSI3 | IMM3(imm) | RD3(dst) | RN3(reg));
-				if (negated_imm <= 0x7)
-					return push_inst16(compiler, SUBSI3 | IMM3(negated_imm) | RD3(dst) | RN3(reg));
+				if (nimm <= 0x7)
+					return push_inst16(compiler, SUBSI3 | IMM3(nimm) | RD3(dst) | RN3(reg));
 				if (reg == dst) {
 					if (imm <= 0xff)
 						return push_inst16(compiler, ADDSI8 | IMM8(imm) | RDN3(dst));
-					if (negated_imm <= 0xff)
-						return push_inst16(compiler, SUBSI8 | IMM8(negated_imm) | RDN3(dst));
+					if (nimm <= 0xff)
+						return push_inst16(compiler, SUBSI8 | IMM8(nimm) | RDN3(dst));
 				}
 			}
 			if (!(flags & SET_FLAGS)) {
 				if (imm <= 0xfff)
 					return push_inst32(compiler, ADDWI | RD4(dst) | RN4(reg) | IMM12(imm));
-				if (negated_imm <= 0xfff)
-					return push_inst32(compiler, SUBWI | RD4(dst) | RN4(reg) | IMM12(negated_imm));
+				if (nimm <= 0xfff)
+					return push_inst32(compiler, SUBWI | RD4(dst) | RN4(reg) | IMM12(nimm));
 			}
 			imm = get_imm(imm);
 			if (imm != INVALID_IMM)
@@ -572,64 +567,60 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
 				return push_inst32(compiler, ADCI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
 			break;
 		case SLJIT_SUB:
-			if (flags & ARG2_IMM) {
-				negated_imm = (sljit_uw)-(sljit_sw)imm;
-				if (!(flags & KEEP_FLAGS) && IS_2_LO_REGS(reg, dst)) {
-					if (imm <= 0x7)
-						return push_inst16(compiler, SUBSI3 | IMM3(imm) | RD3(dst) | RN3(reg));
-					if (negated_imm <= 0x7)
-						return push_inst16(compiler, ADDSI3 | IMM3(negated_imm) | RD3(dst) | RN3(reg));
-					if (reg == dst) {
-						if (imm <= 0xff)
-							return push_inst16(compiler, SUBSI8 | IMM8(imm) | RDN3(dst));
-						if (negated_imm <= 0xff)
-							return push_inst16(compiler, ADDSI8 | IMM8(negated_imm) | RDN3(dst));
-					}
-					if (imm <= 0xff && (flags & UNUSED_RETURN))
-						return push_inst16(compiler, CMPI | IMM8(imm) | RDN3(reg));
-				}
-				if (!(flags & SET_FLAGS)) {
-					if (imm <= 0xfff)
-						return push_inst32(compiler, SUBWI | RD4(dst) | RN4(reg) | IMM12(imm));
-					if (negated_imm <= 0xfff)
-						return push_inst32(compiler, ADDWI | RD4(dst) | RN4(reg) | IMM12(negated_imm));
-				}
-				imm = get_imm(imm);
-				if (imm != INVALID_IMM)
-					return push_inst32(compiler, SUB_WI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
-			}
-			else {
+			if (flags & ARG1_IMM) {
 				if (!(flags & KEEP_FLAGS) && imm == 0 && IS_2_LO_REGS(reg, dst))
 					return push_inst16(compiler, RSBSI | RD3(dst) | RN3(reg));
 				imm = get_imm(imm);
 				if (imm != INVALID_IMM)
 					return push_inst32(compiler, RSB_WI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
+				break;
 			}
-			break;
-		case SLJIT_SUBC:
-			if (flags & ARG2_IMM) {
-				imm = get_imm(imm);
-				if (imm != INVALID_IMM)
-					return push_inst32(compiler, SBCI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
+			nimm = -imm;
+			if (!(flags & KEEP_FLAGS) && IS_2_LO_REGS(reg, dst)) {
+				if (imm <= 0x7)
+					return push_inst16(compiler, SUBSI3 | IMM3(imm) | RD3(dst) | RN3(reg));
+				if (nimm <= 0x7)
+					return push_inst16(compiler, ADDSI3 | IMM3(nimm) | RD3(dst) | RN3(reg));
+				if (reg == dst) {
+					if (imm <= 0xff)
+						return push_inst16(compiler, SUBSI8 | IMM8(imm) | RDN3(dst));
+					if (nimm <= 0xff)
+						return push_inst16(compiler, ADDSI8 | IMM8(nimm) | RDN3(dst));
+				}
+				if (imm <= 0xff && (flags & UNUSED_RETURN))
+					return push_inst16(compiler, CMPI | IMM8(imm) | RDN3(reg));
 			}
+			if (!(flags & SET_FLAGS)) {
+				if (imm <= 0xfff)
+					return push_inst32(compiler, SUBWI | RD4(dst) | RN4(reg) | IMM12(imm));
+				if (nimm <= 0xfff)
+					return push_inst32(compiler, ADDWI | RD4(dst) | RN4(reg) | IMM12(nimm));
+			}
+			imm = get_imm(imm);
+			if (imm != INVALID_IMM)
+				return push_inst32(compiler, SUB_WI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
 			break;
-		case SLJIT_MUL:
-			/* No form with immediate operand. */
+		case SLJIT_SUBC:
+			if (flags & ARG1_IMM)
+				break;
+			imm = get_imm(imm);
+			if (imm != INVALID_IMM)
+				return push_inst32(compiler, SBCI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
 			break;
 		case SLJIT_AND:
+			nimm = get_imm(imm);
+			if (nimm != INVALID_IMM)
+				return push_inst32(compiler, ANDI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | nimm);
 			imm = get_imm(imm);
 			if (imm != INVALID_IMM)
-				return push_inst32(compiler, ANDI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
-			imm = get_imm(~((flags & ARG2_IMM) ? arg2 : arg1));
-			if (imm != INVALID_IMM)
 				return push_inst32(compiler, BICI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
 			break;
 		case SLJIT_OR:
+			nimm = get_imm(imm);
+			if (nimm != INVALID_IMM)
+				return push_inst32(compiler, ORRI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | nimm);
 			imm = get_imm(imm);
 			if (imm != INVALID_IMM)
-				return push_inst32(compiler, ORRI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
-			imm = get_imm(~((flags & ARG2_IMM) ? arg2 : arg1));
-			if (imm != INVALID_IMM)
 				return push_inst32(compiler, ORNI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
 			break;
 		case SLJIT_XOR:
@@ -638,50 +629,32 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
 				return push_inst32(compiler, EORI | (flags & SET_FLAGS) | RD4(dst) | RN4(reg) | imm);
 			break;
 		case SLJIT_SHL:
-			if (flags & ARG2_IMM) {
-				imm &= 0x1f;
-				if (imm == 0) {
-					if (!(flags & SET_FLAGS))
-						return push_inst16(compiler, MOV | SET_REGS44(dst, reg));
-					if (IS_2_LO_REGS(dst, reg))
-						return push_inst16(compiler, MOVS | RD3(dst) | RN3(reg));
-					return push_inst32(compiler, MOV_W | SET_FLAGS | RD4(dst) | RM4(reg));
-				}
+		case SLJIT_LSHR:
+		case SLJIT_ASHR:
+			if (flags & ARG1_IMM)
+				break;
+			imm &= 0x1f;
+			if (imm == 0) {
+				if (!(flags & SET_FLAGS))
+					return push_inst16(compiler, MOV | SET_REGS44(dst, reg));
+				if (IS_2_LO_REGS(dst, reg))
+					return push_inst16(compiler, MOVS | RD3(dst) | RN3(reg));
+				return push_inst32(compiler, MOV_W | SET_FLAGS | RD4(dst) | RM4(reg));
+			}
+			switch (flags & 0xffff) {
+			case SLJIT_SHL:
 				if (!(flags & KEEP_FLAGS) && IS_2_LO_REGS(dst, reg))
 					return push_inst16(compiler, LSLSI | RD3(dst) | RN3(reg) | (imm << 6));
 				return push_inst32(compiler, LSL_WI | (flags & SET_FLAGS) | RD4(dst) | RM4(reg) | IMM5(imm));
-			}
-			break;
-		case SLJIT_LSHR:
-			if (flags & ARG2_IMM) {
-				imm &= 0x1f;
-				if (imm == 0) {
-					if (!(flags & SET_FLAGS))
-						return push_inst16(compiler, MOV | SET_REGS44(dst, reg));
-					if (IS_2_LO_REGS(dst, reg))
-						return push_inst16(compiler, MOVS | RD3(dst) | RN3(reg));
-					return push_inst32(compiler, MOV_W | SET_FLAGS | RD4(dst) | RM4(reg));
-				}
+			case SLJIT_LSHR:
 				if (!(flags & KEEP_FLAGS) && IS_2_LO_REGS(dst, reg))
 					return push_inst16(compiler, LSRSI | RD3(dst) | RN3(reg) | (imm << 6));
 				return push_inst32(compiler, LSR_WI | (flags & SET_FLAGS) | RD4(dst) | RM4(reg) | IMM5(imm));
-			}
-			break;
-		case SLJIT_ASHR:
-			if (flags & ARG2_IMM) {
-				imm &= 0x1f;
-				if (imm == 0) {
-					if (!(flags & SET_FLAGS))
-						return push_inst16(compiler, MOV | SET_REGS44(dst, reg));
-					if (IS_2_LO_REGS(dst, reg))
-						return push_inst16(compiler, MOVS | RD3(dst) | RN3(reg));
-					return push_inst32(compiler, MOV_W | SET_FLAGS | RD4(dst) | RM4(reg));
-				}
+			default: /* SLJIT_ASHR */
 				if (!(flags & KEEP_FLAGS) && IS_2_LO_REGS(dst, reg))
 					return push_inst16(compiler, ASRSI | RD3(dst) | RN3(reg) | (imm << 6));
 				return push_inst32(compiler, ASR_WI | (flags & SET_FLAGS) | RD4(dst) | RM4(reg) | IMM5(imm));
 			}
-			break;
 		default:
 			SLJIT_ASSERT_STOP();
 			break;
@@ -708,6 +681,8 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
 	case SLJIT_MOVU_SI:
 	case SLJIT_MOVU_P:
 		SLJIT_ASSERT(!(flags & SET_FLAGS) && arg1 == TMP_REG1);
+		if (dst == arg2)
+			return SLJIT_SUCCESS;
 		return push_inst16(compiler, MOV | SET_REGS44(dst, arg2));
 	case SLJIT_MOV_UB:
 	case SLJIT_MOVU_UB:
@@ -834,7 +809,7 @@ static sljit_si emit_op_imm(struct sljit_compiler *compiler, sljit_si flags, slj
   s = store
 */
 
-static SLJIT_CONST sljit_uw sljit_mem16[12] = {
+static SLJIT_CONST sljit_ins sljit_mem16[12] = {
 /* w u l */ 0x5800 /* ldr */,
 /* w u s */ 0x5000 /* str */,
 /* w s l */ 0x5800 /* ldr */,
@@ -851,7 +826,7 @@ static SLJIT_CONST sljit_uw sljit_mem16[12] = {
 /* h s s */ 0x5200 /* strh */,
 };
 
-static SLJIT_CONST sljit_uw sljit_mem16_imm5[12] = {
+static SLJIT_CONST sljit_ins sljit_mem16_imm5[12] = {
 /* w u l */ 0x6800 /* ldr imm5 */,
 /* w u s */ 0x6000 /* str imm5 */,
 /* w s l */ 0x6800 /* ldr imm5 */,
@@ -870,7 +845,7 @@ static SLJIT_CONST sljit_uw sljit_mem16_imm5[12] = {
 
 #define MEM_IMM8	0xc00
 #define MEM_IMM12	0x800000
-static SLJIT_CONST sljit_uw sljit_mem32[12] = {
+static SLJIT_CONST sljit_ins sljit_mem32[12] = {
 /* w u l */ 0xf8500000 /* ldr.w */,
 /* w u s */ 0xf8400000 /* str.w */,
 /* w s l */ 0xf8500000 /* ldr.w */,
@@ -911,69 +886,71 @@ static sljit_si emit_set_delta(struct sljit_compiler *compiler, sljit_si dst, sl
 /* Can perform an operation using at most 1 instruction. */
 static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg, sljit_sw argw)
 {
-	sljit_si tmp;
+	sljit_si other_r, shift;
 
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
 	if (SLJIT_UNLIKELY(flags & UPDATE)) {
-		if ((arg & 0xf) && !(arg & 0xf0) && argw <= 0xff && argw >= -0xff) {
-			flags &= ~UPDATE;
-			arg &= 0xf;
+		if ((arg & REG_MASK) && !(arg & OFFS_REG_MASK) && argw <= 0xff && argw >= -0xff) {
 			if (SLJIT_UNLIKELY(flags & ARG_TEST))
 				return 1;
 
+			flags &= ~UPDATE;
+			arg &= 0xf;
 			if (argw >= 0)
 				argw |= 0x200;
 			else {
 				argw = -argw;
 			}
+
 			SLJIT_ASSERT(argw >= 0 && (argw & 0xff) <= 0xff);
 			FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | MEM_IMM8 | RT4(reg) | RN4(arg) | 0x100 | argw));
 			return -1;
 		}
-		return (flags & ARG_TEST) ? SLJIT_SUCCESS : 0;
+		return 0;
 	}
 
-	if (SLJIT_UNLIKELY(arg & 0xf0)) {
-		argw &= 0x3;
-		tmp = (arg >> 4) & 0xf;
-		arg &= 0xf;
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
 		if (SLJIT_UNLIKELY(flags & ARG_TEST))
 			return 1;
 
-		if (!argw && IS_3_LO_REGS(reg, arg, tmp))
-			FAIL_IF(push_inst16(compiler, sljit_mem16[flags] | RD3(reg) | RN3(arg) | RM3(tmp)));
+		argw &= 0x3;
+		other_r = OFFS_REG(arg);
+		arg &= 0xf;
+
+		if (!argw && IS_3_LO_REGS(reg, arg, other_r))
+			FAIL_IF(push_inst16(compiler, sljit_mem16[flags] | RD3(reg) | RN3(arg) | RM3(other_r)));
 		else
-			FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(tmp) | (argw << 4)));
+			FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(other_r) | (argw << 4)));
 		return -1;
 	}
 
-	if (!(arg & 0xf) || argw > 0xfff || argw < -0xff)
-		return (flags & ARG_TEST) ? SLJIT_SUCCESS : 0;
+	if (!(arg & REG_MASK) || argw > 0xfff || argw < -0xff)
+		return 0;
 
 	if (SLJIT_UNLIKELY(flags & ARG_TEST))
 		return 1;
 
 	arg &= 0xf;
 	if (IS_2_LO_REGS(reg, arg) && sljit_mem16_imm5[flags]) {
-		tmp = 3;
+		shift = 3;
 		if (IS_WORD_SIZE(flags)) {
 			if (OFFSET_CHECK(0x1f, 2))
-				tmp = 2;
+				shift = 2;
 		}
 		else if (flags & BYTE_SIZE)
 		{
 			if (OFFSET_CHECK(0x1f, 0))
-				tmp = 0;
+				shift = 0;
 		}
 		else {
 			SLJIT_ASSERT(flags & HALF_SIZE);
 			if (OFFSET_CHECK(0x1f, 1))
-				tmp = 1;
+				shift = 1;
 		}
 
-		if (tmp != 3) {
-			FAIL_IF(push_inst16(compiler, sljit_mem16_imm5[flags] | RD3(reg) | RN3(arg) | (argw << (6 - tmp))));
+		if (shift != 3) {
+			FAIL_IF(push_inst16(compiler, sljit_mem16_imm5[flags] | RD3(reg) | RN3(arg) | (argw << (6 - shift))));
 			return -1;
 		}
 	}
@@ -996,12 +973,13 @@ static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si flags,
    operators always uses word arguments without write back. */
 static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
 {
-	/* Simple operation except for updates. */
-	if ((arg & 0xf0) || !(next_arg & SLJIT_MEM))
+	sljit_sw diff;
+	if ((arg & OFFS_REG_MASK) || !(next_arg & SLJIT_MEM))
 		return 0;
 
-	if (!(arg & 0xf)) {
-		if ((sljit_uw)(argw - next_argw) <= 0xfff || (sljit_uw)(next_argw - argw) <= 0xfff)
+	if (!(arg & REG_MASK)) {
+		diff = argw - next_argw;
+		if (diff <= 0xfff && diff >= -0xfff)
 			return 1;
 		return 0;
 	}
@@ -1009,17 +987,19 @@ static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_
 	if (argw == next_argw)
 		return 1;
 
-	if (arg == next_arg && ((sljit_uw)(argw - next_argw) <= 0xfff || (sljit_uw)(next_argw - argw) <= 0xfff))
+	diff = argw - next_argw;
+	if (arg == next_arg && diff <= 0xfff && diff >= -0xfff)
 		return 1;
 
 	return 0;
 }
 
 /* Emit the necessary instructions. See can_cache above. */
-static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
+static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg,
+	sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
 {
-	sljit_si tmp_r;
-	sljit_sw tmp;
+	sljit_si tmp_r, other_r;
+	sljit_sw diff;
 
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 	if (!(next_arg & SLJIT_MEM)) {
@@ -1029,69 +1009,76 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 
 	tmp_r = (flags & STORE) ? TMP_REG3 : reg;
 
-	if (SLJIT_UNLIKELY(flags & UPDATE)) {
-		flags &= ~UPDATE;
+	if (SLJIT_UNLIKELY((flags & UPDATE) && (arg & REG_MASK))) {
 		/* Update only applies if a base register exists. */
-		if (arg & 0xf) {
-			/* There is no caching here. */
-			tmp = (arg & 0xf0) >> 4;
-			arg &= 0xf;
+		/* There is no caching here. */
+		other_r = OFFS_REG(arg);
+		arg &= 0xf;
+		flags &= ~UPDATE;
 
-			if (!tmp) {
-				if (!(argw & ~0xfff)) {
-					FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | MEM_IMM12 | RT4(reg) | RN4(arg) | argw));
-					return push_inst32(compiler, ADDWI | RD4(arg) | RN4(arg) | IMM12(argw));
-				}
+		if (!other_r) {
+			if (!(argw & ~0xfff)) {
+				FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | MEM_IMM12 | RT4(reg) | RN4(arg) | argw));
+				return push_inst32(compiler, ADDWI | RD4(arg) | RN4(arg) | IMM12(argw));
+			}
 
-				if (compiler->cache_arg == SLJIT_MEM) {
-					if (argw == compiler->cache_argw) {
-						tmp = TMP_REG3;
-						argw = 0;
-					}
-					else if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
-						FAIL_IF(compiler->error);
-						compiler->cache_argw = argw;
-						tmp = TMP_REG3;
-						argw = 0;
-					}
+			if (compiler->cache_arg == SLJIT_MEM) {
+				if (argw == compiler->cache_argw) {
+					other_r = TMP_REG3;
+					argw = 0;
 				}
-
-				if (argw) {
-					FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
-					compiler->cache_arg = SLJIT_MEM;
+				else if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
+					FAIL_IF(compiler->error);
 					compiler->cache_argw = argw;
-					tmp = TMP_REG3;
+					other_r = TMP_REG3;
 					argw = 0;
 				}
 			}
 
-			argw &= 0x3;
-			if (!argw && IS_3_LO_REGS(reg, arg, tmp)) {
-				FAIL_IF(push_inst16(compiler, sljit_mem16[flags] | RD3(reg) | RN3(arg) | RM3(tmp)));
-				return push_inst16(compiler, ADD | SET_REGS44(arg, tmp));
+			if (argw) {
+				FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
+				compiler->cache_arg = SLJIT_MEM;
+				compiler->cache_argw = argw;
+				other_r = TMP_REG3;
+				argw = 0;
 			}
-			FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(tmp) | (argw << 4)));
-			return push_inst32(compiler, ADD_W | RD4(arg) | RN4(arg) | RM4(tmp) | (argw << 6));
 		}
+
+		argw &= 0x3;
+		if (!argw && IS_3_LO_REGS(reg, arg, other_r)) {
+			FAIL_IF(push_inst16(compiler, sljit_mem16[flags] | RD3(reg) | RN3(arg) | RM3(other_r)));
+			return push_inst16(compiler, ADD | SET_REGS44(arg, other_r));
+		}
+		FAIL_IF(push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(other_r) | (argw << 4)));
+		return push_inst32(compiler, ADD_W | RD4(arg) | RN4(arg) | RM4(other_r) | (argw << 6));
 	}
+	flags &= ~UPDATE;
 
-	SLJIT_ASSERT(!(arg & 0xf0));
+	SLJIT_ASSERT(!(arg & OFFS_REG_MASK));
 
 	if (compiler->cache_arg == arg) {
-		if (!((argw - compiler->cache_argw) & ~0xfff))
-			return push_inst32(compiler, sljit_mem32[flags] | MEM_IMM12 | RT4(reg) | RN4(TMP_REG3) | (argw - compiler->cache_argw));
+		diff = argw - compiler->cache_argw;
+		if (!(diff & ~0xfff))
+			return push_inst32(compiler, sljit_mem32[flags] | MEM_IMM12 | RT4(reg) | RN4(TMP_REG3) | diff);
 		if (!((compiler->cache_argw - argw) & ~0xff))
 			return push_inst32(compiler, sljit_mem32[flags] | MEM_IMM8 | RT4(reg) | RN4(TMP_REG3) | (compiler->cache_argw - argw));
-		if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
+		if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, diff) != SLJIT_ERR_UNSUPPORTED) {
 			FAIL_IF(compiler->error);
 			return push_inst32(compiler, sljit_mem32[flags] | MEM_IMM12 | RT4(reg) | RN4(TMP_REG3) | 0);
 		}
 	}
 
-	next_arg = (arg & 0xf) && (arg == next_arg);
+	next_arg = (arg & REG_MASK) && (arg == next_arg) && (argw != next_argw);
 	arg &= 0xf;
-	if (arg && compiler->cache_arg == SLJIT_MEM && compiler->cache_argw == argw)
-		return push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(TMP_REG3));
+	if (arg && compiler->cache_arg == SLJIT_MEM) {
+		if (compiler->cache_argw == argw)
+			return push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(TMP_REG3));
+		if (emit_set_delta(compiler, TMP_REG3, TMP_REG3, argw - compiler->cache_argw) != SLJIT_ERR_UNSUPPORTED) {
+			FAIL_IF(compiler->error);
+			compiler->cache_argw = argw;
+			return push_inst32(compiler, sljit_mem32[flags] | RT4(reg) | RN4(arg) | RM4(TMP_REG3));
+		}
+	}
 
 	compiler->cache_argw = argw;
 	if (next_arg && emit_set_delta(compiler, TMP_REG3, arg, argw) != SLJIT_ERR_UNSUPPORTED) {
@@ -1103,7 +1090,8 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
 		compiler->cache_arg = SLJIT_MEM;
 
-		if (next_arg) {
+		diff = argw - next_argw;
+		if (next_arg && diff <= 0xfff && diff >= -0xfff) {
 			FAIL_IF(push_inst16(compiler, ADD | SET_REGS44(TMP_REG3, arg)));
 			compiler->cache_arg = SLJIT_MEM | arg;
 			arg = 0;
@@ -1270,11 +1258,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 	op = GET_OPCODE(op);
 	switch (op) {
 	case SLJIT_BREAKPOINT:
-		push_inst16(compiler, BKPT);
-		break;
+		return push_inst16(compiler, BKPT);
 	case SLJIT_NOP:
-		push_inst16(compiler, NOP);
-		break;
+		return push_inst16(compiler, NOP);
 	case SLJIT_UMUL:
 	case SLJIT_SMUL:
 		return push_inst32(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
@@ -1321,7 +1307,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 
-	dst_r = (dst >= SLJIT_SCRATCH_REG1 && dst <= TMP_REG3) ? dst : TMP_REG1;
+	dst_r = SLOW_IS_REG(dst) ? dst : TMP_REG1;
 
 	op = GET_OPCODE(op);
 	if (op >= SLJIT_MOV && op <= SLJIT_MOVU_P) {
@@ -1454,7 +1440,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 
-	dst_r = (dst >= SLJIT_SCRATCH_REG1 && dst <= TMP_REG3) ? dst : TMP_REG1;
+	dst_r = SLOW_IS_REG(dst) ? dst : TMP_REG1;
 	flags = (GET_FLAGS(op) ? SET_FLAGS : 0) | ((op & SLJIT_KEEP_FLAGS) ? KEEP_FLAGS : 0);
 
 	if ((dst & SLJIT_MEM) && !getput_arg_fast(compiler, WORD_SIZE | STORE | ARG_TEST, TMP_REG1, dst, dstw))
@@ -1505,9 +1491,6 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 	if (dst == SLJIT_UNUSED)
 		flags |= UNUSED_RETURN;
 
-	if (GET_OPCODE(op) == SLJIT_MUL && (op & SLJIT_SET_O))
-		flags |= SET_MULOV;
-
 	emit_op_imm(compiler, flags | GET_OPCODE(op), dst_r, src1w, src2w);
 
 	if (dst & SLJIT_MEM) {
@@ -1550,7 +1533,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *co
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
 {
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
+#else
+	/* Available by default. */
 	return 1;
+#endif
 }
 
 #define FPU_LOAD (1 << 20)
@@ -1564,20 +1552,21 @@ static sljit_si emit_fop_mem(struct sljit_compiler *compiler, sljit_si flags, sl
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
 	/* Fast loads and stores. */
-	if (SLJIT_UNLIKELY(arg & 0xf0)) {
-		FAIL_IF(push_inst32(compiler, ADD_W | RD4(TMP_REG2) | RN4(arg & 0xf) | RM4((arg & 0xf0) >> 4) | ((argw & 0x3) << 6)));
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
+		FAIL_IF(push_inst32(compiler, ADD_W | RD4(TMP_REG2) | RN4(arg & REG_MASK) | RM4(OFFS_REG(arg)) | ((argw & 0x3) << 6)));
 		arg = SLJIT_MEM | TMP_REG2;
 		argw = 0;
 	}
 
-	if ((arg & 0xf) && (argw & 0x3) == 0) {
+	if ((arg & REG_MASK) && (argw & 0x3) == 0) {
 		if (!(argw & ~0x3fc))
-			return push_inst32(compiler, inst | 0x800000 | RN4(arg & 0xf) | DD4(reg) | (argw >> 2));
+			return push_inst32(compiler, inst | 0x800000 | RN4(arg & REG_MASK) | DD4(reg) | (argw >> 2));
 		if (!(-argw & ~0x3fc))
-			return push_inst32(compiler, inst | RN4(arg & 0xf) | DD4(reg) | (-argw >> 2));
+			return push_inst32(compiler, inst | RN4(arg & REG_MASK) | DD4(reg) | (-argw >> 2));
 	}
 
-	SLJIT_ASSERT(!(arg & 0xf0));
+	/* Slow cases */
+	SLJIT_ASSERT(!(arg & OFFS_REG_MASK));
 	if (compiler->cache_arg == arg) {
 		tmp = argw - compiler->cache_argw;
 		if (!(tmp & ~0x3fc))
@@ -1591,20 +1580,20 @@ static sljit_si emit_fop_mem(struct sljit_compiler *compiler, sljit_si flags, sl
 		}
 	}
 
-	if (arg & 0xf) {
-		if (emit_set_delta(compiler, TMP_REG1, arg & 0xf, argw) != SLJIT_ERR_UNSUPPORTED) {
+	if (arg & REG_MASK) {
+		if (emit_set_delta(compiler, TMP_REG1, arg & REG_MASK, argw) != SLJIT_ERR_UNSUPPORTED) {
 			FAIL_IF(compiler->error);
 			return push_inst32(compiler, inst | 0x800000 | RN4(TMP_REG1) | DD4(reg));
 		}
 		imm = get_imm(argw & ~0x3fc);
 		if (imm != INVALID_IMM) {
-			FAIL_IF(push_inst32(compiler, ADD_WI | RD4(TMP_REG1) | RN4(arg & 0xf) | imm));
+			FAIL_IF(push_inst32(compiler, ADD_WI | RD4(TMP_REG1) | RN4(arg & REG_MASK) | imm));
 			return push_inst32(compiler, inst | 0x800000 | RN4(TMP_REG1) | DD4(reg) | ((argw & 0x3fc) >> 2));
 		}
 		imm = get_imm(-argw & ~0x3fc);
 		if (imm != INVALID_IMM) {
 			argw = -argw;
-			FAIL_IF(push_inst32(compiler, SUB_WI | RD4(TMP_REG1) | RN4(arg & 0xf) | imm));
+			FAIL_IF(push_inst32(compiler, SUB_WI | RD4(TMP_REG1) | RN4(arg & REG_MASK) | imm));
 			return push_inst32(compiler, inst | RN4(TMP_REG1) | DD4(reg) | ((argw & 0x3fc) >> 2));
 		}
 	}
@@ -1612,13 +1601,9 @@ static sljit_si emit_fop_mem(struct sljit_compiler *compiler, sljit_si flags, sl
 	compiler->cache_arg = arg;
 	compiler->cache_argw = argw;
 
-	if (SLJIT_UNLIKELY(!(arg & 0xf)))
-		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
-	else {
-		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
-		if (arg & 0xf)
-			FAIL_IF(push_inst16(compiler, ADD | SET_REGS44(TMP_REG3, (arg & 0xf))));
-	}
+	FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
+	if (arg & REG_MASK)
+		FAIL_IF(push_inst16(compiler, ADD | SET_REGS44(TMP_REG3, (arg & REG_MASK))));
 	return push_inst32(compiler, inst | 0x800000 | RN4(TMP_REG3) | DD4(reg));
 }
 
@@ -1649,7 +1634,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 		return push_inst32(compiler, VMRS);
 	}
 
-	dst_r = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : dst;
+	dst_r = (dst <= REG_MASK) ? dst : TMP_FREG1;
 	if (src & SLJIT_MEM) {
 		emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, dst_r, src, srcw);
 		src = dst_r;
@@ -1668,9 +1653,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 		break;
 	}
 
-	if (dst & SLJIT_MEM)
-		return emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP), TMP_FREG1, dst, dstw);
-	return SLJIT_SUCCESS;
+	if (!(dst & SLJIT_MEM))
+		return SLJIT_SUCCESS;
+	return emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP), TMP_FREG1, dst, dstw);
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
@@ -1687,7 +1672,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	compiler->cache_argw = 0;
 	op ^= SLJIT_SINGLE_OP;
 
-	dst_r = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : dst;
+	dst_r = (dst <= REG_MASK) ? dst : TMP_FREG1;
 	if (src1 & SLJIT_MEM) {
 		emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP) | FPU_LOAD, TMP_FREG1, src1, src1w);
 		src1 = TMP_FREG1;
@@ -1712,9 +1697,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 		break;
 	}
 
-	if (dst & SLJIT_MEM)
-		return emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP), TMP_FREG1, dst, dstw);
-	return SLJIT_SUCCESS;
+	if (!(dst & SLJIT_MEM))
+		return SLJIT_SUCCESS;
+	return emit_fop_mem(compiler, (op & SLJIT_SINGLE_OP), TMP_FREG1, dst, dstw);
 }
 
 #undef FPU_LOAD
@@ -1733,7 +1718,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
 
-	if (dst <= TMP_REG3)
+	if (dst <= REG_MASK)
 		return push_inst16(compiler, MOV | SET_REGS44(dst, TMP_REG3));
 
 	/* Memory. */
@@ -1752,7 +1737,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 	check_sljit_emit_fast_return(compiler, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= TMP_REG3)
+	if (src <= REG_MASK)
 		FAIL_IF(push_inst16(compiler, MOV | SET_REGS44(TMP_REG3, src)));
 	else if (src & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, WORD_SIZE, TMP_REG3, src, srcw))
@@ -1846,7 +1831,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compi
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
 {
 	struct sljit_jump *jump;
-	sljit_si cc;
+	sljit_ins cc;
 
 	CHECK_ERROR_PTR();
 	check_sljit_emit_jump(compiler, type);
@@ -1885,25 +1870,23 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	/* In ARM, we don't need to touch the arguments. */
-	if (src & SLJIT_IMM) {
-		jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
-		FAIL_IF(!jump);
-		set_jump(jump, compiler, JUMP_ADDR | ((type >= SLJIT_FAST_CALL) ? IS_BL : 0));
-		jump->u.target = srcw;
-
-		FAIL_IF(emit_imm32_const(compiler, TMP_REG1, 0));
-		jump->addr = compiler->size;
-		FAIL_IF(push_inst16(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RN3(TMP_REG1)));
-	}
-	else {
-		if (src <= TMP_REG3)
+	if (!(src & SLJIT_IMM)) {
+		if (FAST_IS_REG(src))
 			return push_inst16(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RN3(src));
 
 		FAIL_IF(emit_op_mem(compiler, WORD_SIZE, type <= SLJIT_JUMP ? TMP_PC : TMP_REG1, src, srcw));
 		if (type >= SLJIT_FAST_CALL)
 			return push_inst16(compiler, BLX | RN3(TMP_REG1));
 	}
-	return SLJIT_SUCCESS;
+
+	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
+	FAIL_IF(!jump);
+	set_jump(jump, compiler, JUMP_ADDR | ((type >= SLJIT_FAST_CALL) ? IS_BL : 0));
+	jump->u.target = srcw;
+
+	FAIL_IF(emit_imm32_const(compiler, TMP_REG1, 0));
+	jump->addr = compiler->size;
+	return push_inst16(compiler, (type <= SLJIT_JUMP ? BX : BLX) | RN3(TMP_REG1));
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
@@ -1912,8 +1895,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	sljit_si type)
 {
 	sljit_si dst_r, flags = GET_ALL_FLAGS(op);
-	sljit_ins ins;
-	sljit_uw cc;
+	sljit_ins cc, ins;
 
 	CHECK_ERROR();
 	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
@@ -1925,7 +1907,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 
 	op = GET_OPCODE(op);
 	cc = get_cc(type);
-	dst_r = (dst <= TMP_REG3) ? dst : TMP_REG2;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
 
 	if (op < SLJIT_ADD) {
 		FAIL_IF(push_inst16(compiler, IT | (cc << 4) | (((cc & 0x1) ^ 0x1) << 3) | 0x4));
@@ -1936,11 +1918,13 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 			FAIL_IF(push_inst16(compiler, MOVSI | RDN3(dst_r) | 1));
 			FAIL_IF(push_inst16(compiler, MOVSI | RDN3(dst_r) | 0));
 		}
-		return dst_r == TMP_REG2 ? emit_op_mem(compiler, WORD_SIZE | STORE, TMP_REG2, dst, dstw) : SLJIT_SUCCESS;
+		if (dst_r != TMP_REG2)
+			return SLJIT_SUCCESS;
+		return emit_op_mem(compiler, WORD_SIZE | STORE, TMP_REG2, dst, dstw);
 	}
 
 	ins = (op == SLJIT_AND ? ANDI : (op == SLJIT_OR ? ORRI : EORI));
-	if ((op == SLJIT_OR || op == SLJIT_XOR) && dst <= TMP_REG3 && dst == src) {
+	if ((op == SLJIT_OR || op == SLJIT_XOR) && FAST_IS_REG(dst) && dst == src) {
 		/* Does not change the other bits. */
 		FAIL_IF(push_inst16(compiler, IT | (cc << 4) | 0x8));
 		FAIL_IF(push_inst32(compiler, ins | RN4(src) | RD4(dst) | 1));
@@ -1956,18 +1940,25 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 	if (src & SLJIT_MEM) {
-		FAIL_IF(emit_op_mem2(compiler, WORD_SIZE, TMP_REG1, src, srcw, dst, dstw));
-		src = TMP_REG1;
+		FAIL_IF(emit_op_mem2(compiler, WORD_SIZE, TMP_REG2, src, srcw, dst, dstw));
+		src = TMP_REG2;
 		srcw = 0;
 	} else if (src & SLJIT_IMM) {
-		FAIL_IF(load_immediate(compiler, TMP_REG1, srcw));
-		src = TMP_REG1;
+		FAIL_IF(load_immediate(compiler, TMP_REG2, srcw));
+		src = TMP_REG2;
 		srcw = 0;
 	}
 
-	FAIL_IF(push_inst16(compiler, IT | (cc << 4) | (((cc & 0x1) ^ 0x1) << 3) | 0x4));
-	FAIL_IF(push_inst32(compiler, ins | RN4(src) | RD4(dst_r) | 1));
-	FAIL_IF(push_inst32(compiler, ins | RN4(src) | RD4(dst_r) | 0));
+	if (op == SLJIT_AND || src != dst_r) {
+		FAIL_IF(push_inst16(compiler, IT | (cc << 4) | (((cc & 0x1) ^ 0x1) << 3) | 0x4));
+		FAIL_IF(push_inst32(compiler, ins | RN4(src) | RD4(dst_r) | 1));
+		FAIL_IF(push_inst32(compiler, ins | RN4(src) | RD4(dst_r) | 0));
+	}
+	else {
+		FAIL_IF(push_inst16(compiler, IT | (cc << 4) | 0x8));
+		FAIL_IF(push_inst32(compiler, ins | RN4(src) | RD4(dst_r) | 1));
+	}
+
 	if (dst_r == TMP_REG2)
 		FAIL_IF(emit_op_mem2(compiler, WORD_SIZE | STORE, TMP_REG2, dst, dstw, 0, 0));
 
@@ -1993,7 +1984,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 	PTR_FAIL_IF(!const_);
 	set_const(const_, compiler);
 
-	dst_r = (dst <= TMP_REG3) ? dst : TMP_REG1;
+	dst_r = SLOW_IS_REG(dst) ? dst : TMP_REG1;
 	PTR_FAIL_IF(emit_imm32_const(compiler, dst_r, init_value));
 
 	if (dst & SLJIT_MEM)
@@ -2003,12 +1994,14 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 
 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
 {
-	inline_set_jump_addr(addr, new_addr, 1);
+	sljit_uh *inst = (sljit_uh*)addr;
+	modify_imm32_const(inst, new_addr);
+	SLJIT_CACHE_FLUSH(inst, inst + 4);
 }
 
 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
 {
-	sljit_uh* inst = (sljit_uh*)addr;
+	sljit_uh *inst = (sljit_uh*)addr;
 	modify_imm32_const(inst, new_constant);
-	SLJIT_CACHE_FLUSH(inst, inst + 3);
+	SLJIT_CACHE_FLUSH(inst, inst + 4);
 }
diff --git a/src/3rdparty/pcre/sljit/sljitNativeMIPS_32.c b/src/3rdparty/pcre/sljit/sljitNativeMIPS_32.c
index f8c214863d..cb7c695168 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeMIPS_32.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeMIPS_32.c
@@ -52,7 +52,7 @@ static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst_ar,
 			FAIL_IF(push_inst(compiler, op_norm | S(src1) | T(src2) | D(dst), DR(dst))); \
 	}
 
-#define EMIT_SHIFT(op_imm, op_norm) \
+#define EMIT_SHIFT(op_imm, op_v) \
 	if (flags & SRC2_IMM) { \
 		if (op & SLJIT_SET_E) \
 			FAIL_IF(push_inst(compiler, op_imm | T(src1) | DA(EQUAL_FLAG) | SH_IMM(src2), EQUAL_FLAG)); \
@@ -61,16 +61,14 @@ static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst_ar,
 	} \
 	else { \
 		if (op & SLJIT_SET_E) \
-			FAIL_IF(push_inst(compiler, op_norm | S(src2) | T(src1) | DA(EQUAL_FLAG), EQUAL_FLAG)); \
+			FAIL_IF(push_inst(compiler, op_v | S(src2) | T(src1) | DA(EQUAL_FLAG), EQUAL_FLAG)); \
 		if (CHECK_FLAGS(SLJIT_SET_E)) \
-			FAIL_IF(push_inst(compiler, op_norm | S(src2) | T(src1) | D(dst), DR(dst))); \
+			FAIL_IF(push_inst(compiler, op_v | S(src2) | T(src1) | D(dst), DR(dst))); \
 	}
 
 static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags,
 	sljit_si dst, sljit_si src1, sljit_sw src2)
 {
-	sljit_si overflow_ra = 0;
-
 	switch (GET_OPCODE(op)) {
 	case SLJIT_MOV:
 	case SLJIT_MOV_UI:
@@ -138,30 +136,31 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 			return push_inst(compiler, XORI | SA(EQUAL_FLAG) | TA(EQUAL_FLAG) | IMM(1), EQUAL_FLAG);
 		}
 		/* Nearly all instructions are unmovable in the following sequence. */
-		FAIL_IF(push_inst(compiler, ADDU_W | S(src2) | TA(0) | D(TMP_REG1), DR(TMP_REG1)));
+		FAIL_IF(push_inst(compiler, ADDU | S(src2) | TA(0) | D(TMP_REG1), DR(TMP_REG1)));
 		/* Check zero. */
 		FAIL_IF(push_inst(compiler, BEQ | S(TMP_REG1) | TA(0) | IMM(5), UNMOVABLE_INS));
 		FAIL_IF(push_inst(compiler, ORI | SA(0) | T(dst) | IMM(32), UNMOVABLE_INS));
-		FAIL_IF(push_inst(compiler, ADDIU_W | SA(0) | T(dst) | IMM(-1), DR(dst)));
+		FAIL_IF(push_inst(compiler, ADDIU | SA(0) | T(dst) | IMM(-1), DR(dst)));
 		/* Loop for searching the highest bit. */
-		FAIL_IF(push_inst(compiler, ADDIU_W | S(dst) | T(dst) | IMM(1), DR(dst)));
+		FAIL_IF(push_inst(compiler, ADDIU | S(dst) | T(dst) | IMM(1), DR(dst)));
 		FAIL_IF(push_inst(compiler, BGEZ | S(TMP_REG1) | IMM(-2), UNMOVABLE_INS));
 		FAIL_IF(push_inst(compiler, SLL | T(TMP_REG1) | D(TMP_REG1) | SH_IMM(1), UNMOVABLE_INS));
 		if (op & SLJIT_SET_E)
-			return push_inst(compiler, ADDU_W | S(dst) | TA(0) | DA(EQUAL_FLAG), EQUAL_FLAG);
+			return push_inst(compiler, ADDU | S(dst) | TA(0) | DA(EQUAL_FLAG), EQUAL_FLAG);
 #endif
 		return SLJIT_SUCCESS;
 
 	case SLJIT_ADD:
 		if (flags & SRC2_IMM) {
 			if (op & SLJIT_SET_O) {
-				FAIL_IF(push_inst(compiler, SRL | T(src1) | DA(TMP_EREG1) | SH_IMM(31), TMP_EREG1));
-				if (src2 < 0)
-					FAIL_IF(push_inst(compiler, XORI | SA(TMP_EREG1) | TA(TMP_EREG1) | IMM(1), TMP_EREG1));
+				if (src2 >= 0)
+					FAIL_IF(push_inst(compiler, OR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
+				else
+					FAIL_IF(push_inst(compiler, NOR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
 			}
 			if (op & SLJIT_SET_E)
 				FAIL_IF(push_inst(compiler, ADDIU | S(src1) | TA(EQUAL_FLAG) | IMM(src2), EQUAL_FLAG));
-			if (op & SLJIT_SET_C) {
+			if (op & (SLJIT_SET_C | SLJIT_SET_O)) {
 				if (src2 >= 0)
 					FAIL_IF(push_inst(compiler, ORI | S(src1) | TA(ULESS_FLAG) | IMM(src2), ULESS_FLAG));
 				else {
@@ -172,45 +171,28 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 			/* dst may be the same as src1 or src2. */
 			if (CHECK_FLAGS(SLJIT_SET_E))
 				FAIL_IF(push_inst(compiler, ADDIU | S(src1) | T(dst) | IMM(src2), DR(dst)));
-			if (op & SLJIT_SET_O) {
-				FAIL_IF(push_inst(compiler, SRL | T(dst) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
-				if (src2 < 0)
-					FAIL_IF(push_inst(compiler, XORI | SA(OVERFLOW_FLAG) | TA(OVERFLOW_FLAG) | IMM(1), OVERFLOW_FLAG));
-			}
 		}
 		else {
-			if (op & SLJIT_SET_O) {
+			if (op & SLJIT_SET_O)
 				FAIL_IF(push_inst(compiler, XOR | S(src1) | T(src2) | DA(TMP_EREG1), TMP_EREG1));
-				FAIL_IF(push_inst(compiler, SRL | TA(TMP_EREG1) | DA(TMP_EREG1) | SH_IMM(31), TMP_EREG1));
-				if (src1 != dst)
-					overflow_ra = DR(src1);
-				else if (src2 != dst)
-					overflow_ra = DR(src2);
-				else {
-					/* Rare ocasion. */
-					FAIL_IF(push_inst(compiler, ADDU | S(src1) | TA(0) | DA(TMP_EREG2), TMP_EREG2));
-					overflow_ra = TMP_EREG2;
-				}
-			}
 			if (op & SLJIT_SET_E)
 				FAIL_IF(push_inst(compiler, ADDU | S(src1) | T(src2) | DA(EQUAL_FLAG), EQUAL_FLAG));
-			if (op & SLJIT_SET_C)
+			if (op & (SLJIT_SET_C | SLJIT_SET_O))
 				FAIL_IF(push_inst(compiler, OR | S(src1) | T(src2) | DA(ULESS_FLAG), ULESS_FLAG));
 			/* dst may be the same as src1 or src2. */
 			if (CHECK_FLAGS(SLJIT_SET_E))
 				FAIL_IF(push_inst(compiler, ADDU | S(src1) | T(src2) | D(dst), DR(dst)));
-			if (op & SLJIT_SET_O) {
-				FAIL_IF(push_inst(compiler, XOR | S(dst) | TA(overflow_ra) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
-				FAIL_IF(push_inst(compiler, SRL | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
-			}
 		}
 
 		/* a + b >= a | b (otherwise, the carry should be set to 1). */
-		if (op & SLJIT_SET_C)
+		if (op & (SLJIT_SET_C | SLJIT_SET_O))
 			FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(ULESS_FLAG) | DA(ULESS_FLAG), ULESS_FLAG));
-		if (op & SLJIT_SET_O)
-			return push_inst(compiler, MOVN | SA(0) | TA(TMP_EREG1) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG);
-		return SLJIT_SUCCESS;
+		if (!(op & SLJIT_SET_O))
+			return SLJIT_SUCCESS;
+		FAIL_IF(push_inst(compiler, SLL | TA(ULESS_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | SA(TMP_EREG1) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | S(dst) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		return push_inst(compiler, SLL | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG);
 
 	case SLJIT_ADDC:
 		if (flags & SRC2_IMM) {
@@ -236,14 +218,13 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 		if (!(op & SLJIT_SET_C))
 			return SLJIT_SUCCESS;
 
-		/* Set TMP_EREG2 (dst == 0) && (ULESS_FLAG == 1). */
-		FAIL_IF(push_inst(compiler, SLTIU | S(dst) | TA(TMP_EREG2) | IMM(1), TMP_EREG2));
-		FAIL_IF(push_inst(compiler, AND | SA(TMP_EREG2) | TA(ULESS_FLAG) | DA(TMP_EREG2), TMP_EREG2));
+		/* Set ULESS_FLAG (dst == 0) && (ULESS_FLAG == 1). */
+		FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(ULESS_FLAG) | DA(ULESS_FLAG), ULESS_FLAG));
 		/* Set carry flag. */
-		return push_inst(compiler, OR | SA(TMP_EREG2) | TA(TMP_EREG1) | DA(ULESS_FLAG), ULESS_FLAG);
+		return push_inst(compiler, OR | SA(ULESS_FLAG) | TA(TMP_EREG1) | DA(ULESS_FLAG), ULESS_FLAG);
 
 	case SLJIT_SUB:
-		if ((flags & SRC2_IMM) && ((op & (SLJIT_SET_S | SLJIT_SET_U)) || src2 == SIMM_MIN)) {
+		if ((flags & SRC2_IMM) && ((op & (SLJIT_SET_U | SLJIT_SET_S)) || src2 == SIMM_MIN)) {
 			FAIL_IF(push_inst(compiler, ADDIU | SA(0) | T(TMP_REG2) | IMM(src2), DR(TMP_REG2)));
 			src2 = TMP_REG2;
 			flags &= ~SRC2_IMM;
@@ -251,40 +232,25 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 
 		if (flags & SRC2_IMM) {
 			if (op & SLJIT_SET_O) {
-				FAIL_IF(push_inst(compiler, SRL | T(src1) | DA(TMP_EREG1) | SH_IMM(31), TMP_EREG1));
-				if (src2 < 0)
-					FAIL_IF(push_inst(compiler, XORI | SA(TMP_EREG1) | TA(TMP_EREG1) | IMM(1), TMP_EREG1));
-				if (src1 != dst)
-					overflow_ra = DR(src1);
-				else {
-					/* Rare ocasion. */
-					FAIL_IF(push_inst(compiler, ADDU | S(src1) | TA(0) | DA(TMP_EREG2), TMP_EREG2));
-					overflow_ra = TMP_EREG2;
-				}
+				if (src2 >= 0)
+					FAIL_IF(push_inst(compiler, OR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
+				else
+					FAIL_IF(push_inst(compiler, NOR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
 			}
 			if (op & SLJIT_SET_E)
 				FAIL_IF(push_inst(compiler, ADDIU | S(src1) | TA(EQUAL_FLAG) | IMM(-src2), EQUAL_FLAG));
-			if (op & SLJIT_SET_C)
+			if (op & (SLJIT_SET_C | SLJIT_SET_O))
 				FAIL_IF(push_inst(compiler, SLTIU | S(src1) | TA(ULESS_FLAG) | IMM(src2), ULESS_FLAG));
 			/* dst may be the same as src1 or src2. */
 			if (CHECK_FLAGS(SLJIT_SET_E))
 				FAIL_IF(push_inst(compiler, ADDIU | S(src1) | T(dst) | IMM(-src2), DR(dst)));
 		}
 		else {
-			if (op & SLJIT_SET_O) {
+			if (op & SLJIT_SET_O)
 				FAIL_IF(push_inst(compiler, XOR | S(src1) | T(src2) | DA(TMP_EREG1), TMP_EREG1));
-				FAIL_IF(push_inst(compiler, SRL | TA(TMP_EREG1) | DA(TMP_EREG1) | SH_IMM(31), TMP_EREG1));
-				if (src1 != dst)
-					overflow_ra = DR(src1);
-				else {
-					/* Rare ocasion. */
-					FAIL_IF(push_inst(compiler, ADDU | S(src1) | TA(0) | DA(TMP_EREG2), TMP_EREG2));
-					overflow_ra = TMP_EREG2;
-				}
-			}
 			if (op & SLJIT_SET_E)
 				FAIL_IF(push_inst(compiler, SUBU | S(src1) | T(src2) | DA(EQUAL_FLAG), EQUAL_FLAG));
-			if (op & (SLJIT_SET_U | SLJIT_SET_C))
+			if (op & (SLJIT_SET_U | SLJIT_SET_C | SLJIT_SET_O))
 				FAIL_IF(push_inst(compiler, SLTU | S(src1) | T(src2) | DA(ULESS_FLAG), ULESS_FLAG));
 			if (op & SLJIT_SET_U)
 				FAIL_IF(push_inst(compiler, SLTU | S(src2) | T(src1) | DA(UGREATER_FLAG), UGREATER_FLAG));
@@ -293,16 +259,16 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 				FAIL_IF(push_inst(compiler, SLT | S(src2) | T(src1) | DA(GREATER_FLAG), GREATER_FLAG));
 			}
 			/* dst may be the same as src1 or src2. */
-			if (CHECK_FLAGS(SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_C))
+			if (CHECK_FLAGS(SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))
 				FAIL_IF(push_inst(compiler, SUBU | S(src1) | T(src2) | D(dst), DR(dst)));
 		}
 
-		if (op & SLJIT_SET_O) {
-			FAIL_IF(push_inst(compiler, XOR | S(dst) | TA(overflow_ra) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
-			FAIL_IF(push_inst(compiler, SRL | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
-			return push_inst(compiler, MOVZ | SA(0) | TA(TMP_EREG1) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG);
-		}
-		return SLJIT_SUCCESS;
+		if (!(op & SLJIT_SET_O))
+			return SLJIT_SUCCESS;
+		FAIL_IF(push_inst(compiler, SLL | TA(ULESS_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | SA(TMP_EREG1) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | S(dst) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		return push_inst(compiler, SRL | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG);
 
 	case SLJIT_SUBC:
 		if ((flags & SRC2_IMM) && src2 == SIMM_MIN) {
@@ -313,7 +279,7 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 
 		if (flags & SRC2_IMM) {
 			if (op & SLJIT_SET_C)
-				FAIL_IF(push_inst(compiler, SLTIU | S(src1) | TA(TMP_EREG1) | IMM(-src2), TMP_EREG1));
+				FAIL_IF(push_inst(compiler, SLTIU | S(src1) | TA(TMP_EREG1) | IMM(src2), TMP_EREG1));
 			/* dst may be the same as src1 or src2. */
 			FAIL_IF(push_inst(compiler, ADDIU | S(src1) | T(dst) | IMM(-src2), DR(dst)));
 		}
@@ -325,14 +291,10 @@ static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, slj
 		}
 
 		if (op & SLJIT_SET_C)
-			FAIL_IF(push_inst(compiler, MOVZ | SA(ULESS_FLAG) | T(dst) | DA(TMP_EREG1), TMP_EREG1));
+			FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(ULESS_FLAG) | DA(TMP_EREG2), TMP_EREG2));
 
 		FAIL_IF(push_inst(compiler, SUBU | S(dst) | TA(ULESS_FLAG) | D(dst), DR(dst)));
-
-		if (op & SLJIT_SET_C)
-			FAIL_IF(push_inst(compiler, ADDU | SA(TMP_EREG1) | TA(0) | DA(ULESS_FLAG), ULESS_FLAG));
-
-		return SLJIT_SUCCESS;
+		return (op & SLJIT_SET_C) ? push_inst(compiler, OR | SA(TMP_EREG1) | TA(TMP_EREG2) | DA(ULESS_FLAG), ULESS_FLAG) : SLJIT_SUCCESS;
 
 	case SLJIT_MUL:
 		SLJIT_ASSERT(!(flags & SRC2_IMM));
diff --git a/src/3rdparty/pcre/sljit/sljitNativeMIPS_64.c b/src/3rdparty/pcre/sljit/sljitNativeMIPS_64.c
new file mode 100644
index 0000000000..df22ebaf55
--- /dev/null
+++ b/src/3rdparty/pcre/sljit/sljitNativeMIPS_64.c
@@ -0,0 +1,469 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* mips 64-bit arch dependent functions. */
+
+static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst_ar, sljit_sw imm)
+{
+	sljit_si shift = 32;
+	sljit_si shift2;
+	sljit_si inv = 0;
+	sljit_ins ins;
+	sljit_uw uimm;
+
+	if (!(imm & ~0xffff))
+		return push_inst(compiler, ORI | SA(0) | TA(dst_ar) | IMM(imm), dst_ar);
+
+	if (imm < 0 && imm >= SIMM_MIN)
+		return push_inst(compiler, ADDIU | SA(0) | TA(dst_ar) | IMM(imm), dst_ar);
+
+	if (imm <= 0x7fffffffl && imm >= -0x80000000l) {
+		FAIL_IF(push_inst(compiler, LUI | TA(dst_ar) | IMM(imm >> 16), dst_ar));
+		return (imm & 0xffff) ? push_inst(compiler, ORI | SA(dst_ar) | TA(dst_ar) | IMM(imm), dst_ar) : SLJIT_SUCCESS;
+	}
+
+	/* Zero extended number. */
+	uimm = imm;
+	if (imm < 0) {
+		uimm = ~imm;
+		inv = 1;
+	}
+
+	while (!(uimm & 0xff00000000000000l)) {
+		shift -= 8;
+		uimm <<= 8;
+	}
+
+	if (!(uimm & 0xf000000000000000l)) {
+		shift -= 4;
+		uimm <<= 4;
+	}
+
+	if (!(uimm & 0xc000000000000000l)) {
+		shift -= 2;
+		uimm <<= 2;
+	}
+
+	if ((sljit_sw)uimm < 0) {
+		uimm >>= 1;
+		shift += 1;
+	}
+	SLJIT_ASSERT(((uimm & 0xc000000000000000l) == 0x4000000000000000l) && (shift > 0) && (shift <= 32));
+
+	if (inv)
+		uimm = ~uimm;
+
+	FAIL_IF(push_inst(compiler, LUI | TA(dst_ar) | IMM(uimm >> 48), dst_ar));
+	if (uimm & 0x0000ffff00000000l)
+		FAIL_IF(push_inst(compiler, ORI | SA(dst_ar) | TA(dst_ar) | IMM(uimm >> 32), dst_ar));
+
+	imm &= (1l << shift) - 1;
+	if (!(imm & ~0xffff)) {
+		ins = (shift == 32) ? DSLL32 : DSLL;
+		if (shift < 32)
+			ins |= SH_IMM(shift);
+		FAIL_IF(push_inst(compiler, ins | TA(dst_ar) | DA(dst_ar), dst_ar));
+		return !(imm & 0xffff) ? SLJIT_SUCCESS : push_inst(compiler, ORI | SA(dst_ar) | TA(dst_ar) | IMM(imm), dst_ar);
+	}
+
+	/* Double shifts needs to be performed. */
+	uimm <<= 32;
+	shift2 = shift - 16;
+
+	while (!(uimm & 0xf000000000000000l)) {
+		shift2 -= 4;
+		uimm <<= 4;
+	}
+
+	if (!(uimm & 0xc000000000000000l)) {
+		shift2 -= 2;
+		uimm <<= 2;
+	}
+
+	if (!(uimm & 0x8000000000000000l)) {
+		shift2--;
+		uimm <<= 1;
+	}
+
+	SLJIT_ASSERT((uimm & 0x8000000000000000l) && (shift2 > 0) && (shift2 <= 16));
+
+	FAIL_IF(push_inst(compiler, DSLL | TA(dst_ar) | DA(dst_ar) | SH_IMM(shift - shift2), dst_ar));
+	FAIL_IF(push_inst(compiler, ORI | SA(dst_ar) | TA(dst_ar) | IMM(uimm >> 48), dst_ar));
+	FAIL_IF(push_inst(compiler, DSLL | TA(dst_ar) | DA(dst_ar) | SH_IMM(shift2), dst_ar));
+
+	imm &= (1l << shift2) - 1;
+	return !(imm & 0xffff) ? SLJIT_SUCCESS : push_inst(compiler, ORI | SA(dst_ar) | TA(dst_ar) | IMM(imm), dst_ar);
+}
+
+#define SELECT_OP(a, b) \
+	(!(op & SLJIT_INT_OP) ? a : b)
+
+#define EMIT_LOGICAL(op_imm, op_norm) \
+	if (flags & SRC2_IMM) { \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_inst(compiler, op_imm | S(src1) | TA(EQUAL_FLAG) | IMM(src2), EQUAL_FLAG)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_inst(compiler, op_imm | S(src1) | T(dst) | IMM(src2), DR(dst))); \
+	} \
+	else { \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_inst(compiler, op_norm | S(src1) | T(src2) | DA(EQUAL_FLAG), EQUAL_FLAG)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_inst(compiler, op_norm | S(src1) | T(src2) | D(dst), DR(dst))); \
+	}
+
+#define EMIT_SHIFT(op_dimm, op_dimm32, op_imm, op_dv, op_v) \
+	if (flags & SRC2_IMM) { \
+		if (src2 >= 32) { \
+			SLJIT_ASSERT(!(op & SLJIT_INT_OP)); \
+			ins = op_dimm32; \
+			src2 -= 32; \
+		} \
+		else \
+			ins = (op & SLJIT_INT_OP) ? op_imm : op_dimm; \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_inst(compiler, ins | T(src1) | DA(EQUAL_FLAG) | SH_IMM(src2), EQUAL_FLAG)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_inst(compiler, ins | T(src1) | D(dst) | SH_IMM(src2), DR(dst))); \
+	} \
+	else { \
+		ins = (op & SLJIT_INT_OP) ? op_v : op_dv; \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_inst(compiler, ins | S(src2) | T(src1) | DA(EQUAL_FLAG), EQUAL_FLAG)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_inst(compiler, ins | S(src2) | T(src1) | D(dst), DR(dst))); \
+	}
+
+static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags,
+	sljit_si dst, sljit_si src1, sljit_sw src2)
+{
+	sljit_ins ins;
+
+	switch (GET_OPCODE(op)) {
+	case SLJIT_MOV:
+	case SLJIT_MOV_P:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if (dst != src2)
+			return push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(src2) | TA(0) | D(dst), DR(dst));
+		return SLJIT_SUCCESS;
+
+	case SLJIT_MOV_UB:
+	case SLJIT_MOV_SB:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
+			if (op == SLJIT_MOV_SB) {
+				FAIL_IF(push_inst(compiler, DSLL32 | T(src2) | D(dst) | SH_IMM(24), DR(dst)));
+				return push_inst(compiler, DSRA32 | T(dst) | D(dst) | SH_IMM(24), DR(dst));
+			}
+			return push_inst(compiler, ANDI | S(src2) | T(dst) | IMM(0xff), DR(dst));
+		}
+		else if (dst != src2)
+			SLJIT_ASSERT_STOP();
+		return SLJIT_SUCCESS;
+
+	case SLJIT_MOV_UH:
+	case SLJIT_MOV_SH:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
+			if (op == SLJIT_MOV_SH) {
+				FAIL_IF(push_inst(compiler, DSLL32 | T(src2) | D(dst) | SH_IMM(16), DR(dst)));
+				return push_inst(compiler, DSRA32 | T(dst) | D(dst) | SH_IMM(16), DR(dst));
+			}
+			return push_inst(compiler, ANDI | S(src2) | T(dst) | IMM(0xffff), DR(dst));
+		}
+		else if (dst != src2)
+			SLJIT_ASSERT_STOP();
+		return SLJIT_SUCCESS;
+
+	case SLJIT_MOV_UI:
+		SLJIT_ASSERT(!(op & SLJIT_INT_OP));
+		FAIL_IF(push_inst(compiler, DSLL32 | T(src2) | D(dst) | SH_IMM(0), DR(dst)));
+		return push_inst(compiler, DSRL32 | T(dst) | D(dst) | SH_IMM(0), DR(dst));
+
+	case SLJIT_MOV_SI:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		return push_inst(compiler, SLL | T(src2) | D(dst) | SH_IMM(0), DR(dst));
+
+	case SLJIT_NOT:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if (op & SLJIT_SET_E)
+			FAIL_IF(push_inst(compiler, NOR | S(src2) | T(src2) | DA(EQUAL_FLAG), EQUAL_FLAG));
+		if (CHECK_FLAGS(SLJIT_SET_E))
+			FAIL_IF(push_inst(compiler, NOR | S(src2) | T(src2) | D(dst), DR(dst)));
+		return SLJIT_SUCCESS;
+
+	case SLJIT_CLZ:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+#if (defined SLJIT_MIPS_32_64 && SLJIT_MIPS_32_64)
+		if (op & SLJIT_SET_E)
+			FAIL_IF(push_inst(compiler, SELECT_OP(DCLZ, CLZ) | S(src2) | TA(EQUAL_FLAG) | DA(EQUAL_FLAG), EQUAL_FLAG));
+		if (CHECK_FLAGS(SLJIT_SET_E))
+			FAIL_IF(push_inst(compiler, SELECT_OP(DCLZ, CLZ) | S(src2) | T(dst) | D(dst), DR(dst)));
+#else
+		if (SLJIT_UNLIKELY(flags & UNUSED_DEST)) {
+			FAIL_IF(push_inst(compiler, SELECT_OP(DSRL32, SRL) | T(src2) | DA(EQUAL_FLAG) | SH_IMM(31), EQUAL_FLAG));
+			return push_inst(compiler, XORI | SA(EQUAL_FLAG) | TA(EQUAL_FLAG) | IMM(1), EQUAL_FLAG);
+		}
+		/* Nearly all instructions are unmovable in the following sequence. */
+		FAIL_IF(push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(src2) | TA(0) | D(TMP_REG1), DR(TMP_REG1)));
+		/* Check zero. */
+		FAIL_IF(push_inst(compiler, BEQ | S(TMP_REG1) | TA(0) | IMM(5), UNMOVABLE_INS));
+		FAIL_IF(push_inst(compiler, ORI | SA(0) | T(dst) | IMM((op & SLJIT_INT_OP) ? 32 : 64), UNMOVABLE_INS));
+		FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | SA(0) | T(dst) | IMM(-1), DR(dst)));
+		/* Loop for searching the highest bit. */
+		FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(dst) | T(dst) | IMM(1), DR(dst)));
+		FAIL_IF(push_inst(compiler, BGEZ | S(TMP_REG1) | IMM(-2), UNMOVABLE_INS));
+		FAIL_IF(push_inst(compiler, SELECT_OP(DSLL, SLL) | T(TMP_REG1) | D(TMP_REG1) | SH_IMM(1), UNMOVABLE_INS));
+		if (op & SLJIT_SET_E)
+			return push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(dst) | TA(0) | DA(EQUAL_FLAG), EQUAL_FLAG);
+#endif
+		return SLJIT_SUCCESS;
+
+	case SLJIT_ADD:
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_O) {
+				if (src2 >= 0)
+					FAIL_IF(push_inst(compiler, OR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
+				else
+					FAIL_IF(push_inst(compiler, NOR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
+			}
+			if (op & SLJIT_SET_E)
+				FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(src1) | TA(EQUAL_FLAG) | IMM(src2), EQUAL_FLAG));
+			if (op & (SLJIT_SET_C | SLJIT_SET_O)) {
+				if (src2 >= 0)
+					FAIL_IF(push_inst(compiler, ORI | S(src1) | TA(ULESS_FLAG) | IMM(src2), ULESS_FLAG));
+				else {
+					FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | SA(0) | TA(ULESS_FLAG) | IMM(src2), ULESS_FLAG));
+					FAIL_IF(push_inst(compiler, OR | S(src1) | TA(ULESS_FLAG) | DA(ULESS_FLAG), ULESS_FLAG));
+				}
+			}
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E))
+				FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(src1) | T(dst) | IMM(src2), DR(dst)));
+		}
+		else {
+			if (op & SLJIT_SET_O)
+				FAIL_IF(push_inst(compiler, XOR | S(src1) | T(src2) | DA(TMP_EREG1), TMP_EREG1));
+			if (op & SLJIT_SET_E)
+				FAIL_IF(push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(src1) | T(src2) | DA(EQUAL_FLAG), EQUAL_FLAG));
+			if (op & (SLJIT_SET_C | SLJIT_SET_O))
+				FAIL_IF(push_inst(compiler, OR | S(src1) | T(src2) | DA(ULESS_FLAG), ULESS_FLAG));
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E))
+				FAIL_IF(push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(src1) | T(src2) | D(dst), DR(dst)));
+		}
+
+		/* a + b >= a | b (otherwise, the carry should be set to 1). */
+		if (op & (SLJIT_SET_C | SLJIT_SET_O))
+			FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(ULESS_FLAG) | DA(ULESS_FLAG), ULESS_FLAG));
+		if (!(op & SLJIT_SET_O))
+			return SLJIT_SUCCESS;
+		FAIL_IF(push_inst(compiler, SELECT_OP(DSLL32, SLL) | TA(ULESS_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | SA(TMP_EREG1) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | S(dst) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		return push_inst(compiler, SELECT_OP(DSRL32, SLL) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG);
+
+	case SLJIT_ADDC:
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_C) {
+				if (src2 >= 0)
+					FAIL_IF(push_inst(compiler, ORI | S(src1) | TA(TMP_EREG1) | IMM(src2), TMP_EREG1));
+				else {
+					FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | SA(0) | TA(TMP_EREG1) | IMM(src2), TMP_EREG1));
+					FAIL_IF(push_inst(compiler, OR | S(src1) | TA(TMP_EREG1) | DA(TMP_EREG1), TMP_EREG1));
+				}
+			}
+			FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(src1) | T(dst) | IMM(src2), DR(dst)));
+		} else {
+			if (op & SLJIT_SET_C)
+				FAIL_IF(push_inst(compiler, OR | S(src1) | T(src2) | DA(TMP_EREG1), TMP_EREG1));
+			/* dst may be the same as src1 or src2. */
+			FAIL_IF(push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(src1) | T(src2) | D(dst), DR(dst)));
+		}
+		if (op & SLJIT_SET_C)
+			FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(TMP_EREG1) | DA(TMP_EREG1), TMP_EREG1));
+
+		FAIL_IF(push_inst(compiler, SELECT_OP(DADDU, ADDU) | S(dst) | TA(ULESS_FLAG) | D(dst), DR(dst)));
+		if (!(op & SLJIT_SET_C))
+			return SLJIT_SUCCESS;
+
+		/* Set ULESS_FLAG (dst == 0) && (ULESS_FLAG == 1). */
+		FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(ULESS_FLAG) | DA(ULESS_FLAG), ULESS_FLAG));
+		/* Set carry flag. */
+		return push_inst(compiler, OR | SA(ULESS_FLAG) | TA(TMP_EREG1) | DA(ULESS_FLAG), ULESS_FLAG);
+
+	case SLJIT_SUB:
+		if ((flags & SRC2_IMM) && ((op & (SLJIT_SET_U | SLJIT_SET_S)) || src2 == SIMM_MIN)) {
+			FAIL_IF(push_inst(compiler, ADDIU | SA(0) | T(TMP_REG2) | IMM(src2), DR(TMP_REG2)));
+			src2 = TMP_REG2;
+			flags &= ~SRC2_IMM;
+		}
+
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_O) {
+				if (src2 >= 0)
+					FAIL_IF(push_inst(compiler, OR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
+				else
+					FAIL_IF(push_inst(compiler, NOR | S(src1) | T(src1) | DA(TMP_EREG1), TMP_EREG1));
+			}
+			if (op & SLJIT_SET_E)
+				FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(src1) | TA(EQUAL_FLAG) | IMM(-src2), EQUAL_FLAG));
+			if (op & (SLJIT_SET_C | SLJIT_SET_O))
+				FAIL_IF(push_inst(compiler, SLTIU | S(src1) | TA(ULESS_FLAG) | IMM(src2), ULESS_FLAG));
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E))
+				FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(src1) | T(dst) | IMM(-src2), DR(dst)));
+		}
+		else {
+			if (op & SLJIT_SET_O)
+				FAIL_IF(push_inst(compiler, XOR | S(src1) | T(src2) | DA(TMP_EREG1), TMP_EREG1));
+			if (op & SLJIT_SET_E)
+				FAIL_IF(push_inst(compiler, SELECT_OP(DSUBU, SUBU) | S(src1) | T(src2) | DA(EQUAL_FLAG), EQUAL_FLAG));
+			if (op & (SLJIT_SET_U | SLJIT_SET_C | SLJIT_SET_O))
+				FAIL_IF(push_inst(compiler, SLTU | S(src1) | T(src2) | DA(ULESS_FLAG), ULESS_FLAG));
+			if (op & SLJIT_SET_U)
+				FAIL_IF(push_inst(compiler, SLTU | S(src2) | T(src1) | DA(UGREATER_FLAG), UGREATER_FLAG));
+			if (op & SLJIT_SET_S) {
+				FAIL_IF(push_inst(compiler, SLT | S(src1) | T(src2) | DA(LESS_FLAG), LESS_FLAG));
+				FAIL_IF(push_inst(compiler, SLT | S(src2) | T(src1) | DA(GREATER_FLAG), GREATER_FLAG));
+			}
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))
+				FAIL_IF(push_inst(compiler, SELECT_OP(DSUBU, SUBU) | S(src1) | T(src2) | D(dst), DR(dst)));
+		}
+
+		if (!(op & SLJIT_SET_O))
+			return SLJIT_SUCCESS;
+		FAIL_IF(push_inst(compiler, SELECT_OP(DSLL32, SLL) | TA(ULESS_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | SA(TMP_EREG1) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		FAIL_IF(push_inst(compiler, XOR | S(dst) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG));
+		return push_inst(compiler, SELECT_OP(DSRL32, SRL) | TA(OVERFLOW_FLAG) | DA(OVERFLOW_FLAG) | SH_IMM(31), OVERFLOW_FLAG);
+
+	case SLJIT_SUBC:
+		if ((flags & SRC2_IMM) && src2 == SIMM_MIN) {
+			FAIL_IF(push_inst(compiler, ADDIU | SA(0) | T(TMP_REG2) | IMM(src2), DR(TMP_REG2)));
+			src2 = TMP_REG2;
+			flags &= ~SRC2_IMM;
+		}
+
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_C)
+				FAIL_IF(push_inst(compiler, SLTIU | S(src1) | TA(TMP_EREG1) | IMM(src2), TMP_EREG1));
+			/* dst may be the same as src1 or src2. */
+			FAIL_IF(push_inst(compiler, SELECT_OP(DADDIU, ADDIU) | S(src1) | T(dst) | IMM(-src2), DR(dst)));
+		}
+		else {
+			if (op & SLJIT_SET_C)
+				FAIL_IF(push_inst(compiler, SLTU | S(src1) | T(src2) | DA(TMP_EREG1), TMP_EREG1));
+			/* dst may be the same as src1 or src2. */
+			FAIL_IF(push_inst(compiler, SELECT_OP(DSUBU, SUBU) | S(src1) | T(src2) | D(dst), DR(dst)));
+		}
+
+		if (op & SLJIT_SET_C)
+			FAIL_IF(push_inst(compiler, SLTU | S(dst) | TA(ULESS_FLAG) | DA(TMP_EREG2), TMP_EREG2));
+
+		FAIL_IF(push_inst(compiler, SELECT_OP(DSUBU, SUBU) | S(dst) | TA(ULESS_FLAG) | D(dst), DR(dst)));
+		return (op & SLJIT_SET_C) ? push_inst(compiler, OR | SA(TMP_EREG1) | TA(TMP_EREG2) | DA(ULESS_FLAG), ULESS_FLAG) : SLJIT_SUCCESS;
+
+	case SLJIT_MUL:
+		SLJIT_ASSERT(!(flags & SRC2_IMM));
+		if (!(op & SLJIT_SET_O)) {
+#if (defined SLJIT_MIPS_32_64 && SLJIT_MIPS_32_64)
+			if (op & SLJIT_INT_OP)
+				return push_inst(compiler, MUL | S(src1) | T(src2) | D(dst), DR(dst));
+			FAIL_IF(push_inst(compiler, DMULT | S(src1) | T(src2), MOVABLE_INS));
+			return push_inst(compiler, MFLO | D(dst), DR(dst));
+#else
+			FAIL_IF(push_inst(compiler, SELECT_OP(DMULT, MULT) | S(src1) | T(src2), MOVABLE_INS));
+			return push_inst(compiler, MFLO | D(dst), DR(dst));
+#endif
+		}
+		FAIL_IF(push_inst(compiler, SELECT_OP(DMULT, MULT) | S(src1) | T(src2), MOVABLE_INS));
+		FAIL_IF(push_inst(compiler, MFHI | DA(TMP_EREG1), TMP_EREG1));
+		FAIL_IF(push_inst(compiler, MFLO | D(dst), DR(dst)));
+		FAIL_IF(push_inst(compiler, SELECT_OP(DSRA32, SRA) | T(dst) | DA(TMP_EREG2) | SH_IMM(31), TMP_EREG2));
+		return push_inst(compiler, SELECT_OP(DSUBU, SUBU) | SA(TMP_EREG1) | TA(TMP_EREG2) | DA(OVERFLOW_FLAG), OVERFLOW_FLAG);
+
+	case SLJIT_AND:
+		EMIT_LOGICAL(ANDI, AND);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_OR:
+		EMIT_LOGICAL(ORI, OR);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_XOR:
+		EMIT_LOGICAL(XORI, XOR);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_SHL:
+		EMIT_SHIFT(DSLL, DSLL32, SLL, DSLLV, SLLV);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_LSHR:
+		EMIT_SHIFT(DSRL, DSRL32, SRL, DSRLV, SRLV);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_ASHR:
+		EMIT_SHIFT(DSRA, DSRA32, SRA, DSRAV, SRAV);
+		return SLJIT_SUCCESS;
+	}
+
+	SLJIT_ASSERT_STOP();
+	return SLJIT_SUCCESS;
+}
+
+static SLJIT_INLINE sljit_si emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw init_value)
+{
+	FAIL_IF(push_inst(compiler, LUI | T(dst) | IMM(init_value >> 48), DR(dst)));
+	FAIL_IF(push_inst(compiler, ORI | S(dst) | T(dst) | IMM(init_value >> 32), DR(dst)));
+	FAIL_IF(push_inst(compiler, DSLL | T(dst) | D(dst) | SH_IMM(16), DR(dst)));
+	FAIL_IF(push_inst(compiler, ORI | S(dst) | T(dst) | IMM(init_value >> 16), DR(dst)));
+	FAIL_IF(push_inst(compiler, DSLL | T(dst) | D(dst) | SH_IMM(16), DR(dst)));
+	return push_inst(compiler, ORI | S(dst) | T(dst) | IMM(init_value), DR(dst));
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
+{
+	sljit_ins *inst = (sljit_ins*)addr;
+
+	inst[0] = (inst[0] & 0xffff0000) | ((new_addr >> 48) & 0xffff);
+	inst[1] = (inst[1] & 0xffff0000) | ((new_addr >> 32) & 0xffff);
+	inst[3] = (inst[3] & 0xffff0000) | ((new_addr >> 16) & 0xffff);
+	inst[5] = (inst[5] & 0xffff0000) | (new_addr & 0xffff);
+	SLJIT_CACHE_FLUSH(inst, inst + 6);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
+{
+	sljit_ins *inst = (sljit_ins*)addr;
+
+	inst[0] = (inst[0] & 0xffff0000) | ((new_constant >> 48) & 0xffff);
+	inst[1] = (inst[1] & 0xffff0000) | ((new_constant >> 32) & 0xffff);
+	inst[3] = (inst[3] & 0xffff0000) | ((new_constant >> 16) & 0xffff);
+	inst[5] = (inst[5] & 0xffff0000) | (new_constant & 0xffff);
+	SLJIT_CACHE_FLUSH(inst, inst + 6);
+}
diff --git a/src/3rdparty/pcre/sljit/sljitNativeMIPS_common.c b/src/3rdparty/pcre/sljit/sljitNativeMIPS_common.c
index ede1c0bafe..011d8874c2 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeMIPS_common.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeMIPS_common.c
@@ -30,7 +30,7 @@
 SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char* sljit_get_platform_name(void)
 {
 #if (defined SLJIT_MIPS_32_64 && SLJIT_MIPS_32_64)
-	return "MIPS(32)" SLJIT_CPUINFO;
+	return "MIPS V" SLJIT_CPUINFO;
 #else
 	return "MIPS III" SLJIT_CPUINFO;
 #endif
@@ -47,7 +47,7 @@ typedef sljit_ui sljit_ins;
 /* For position independent code, t9 must contain the function address. */
 #define PIC_ADDR_REG	TMP_REG2
 
-/* TMP_EREG1 is used mainly for literal encoding on 64 bit. */
+/* TMP_EREGs are used mainly for arithmetic operations. */
 #define TMP_EREG1	15
 #define TMP_EREG2	24
 /* Floating point status register. */
@@ -86,7 +86,7 @@ static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 4] = {
 #define FS(s)		((s) << 11)
 #define FD(d)		((d) << 6)
 #define IMM(imm)	((imm) & 0xffff)
-#define SH_IMM(imm)	((imm & 0x1f) << 6)
+#define SH_IMM(imm)	((imm) << 6)
 
 #define DR(dr)		(reg_map[dr])
 #define HI(opcode)	((opcode) << 26)
@@ -96,8 +96,8 @@ static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 4] = {
 
 #define ABS_fmt		(HI(17) | FMT_SD | LO(5))
 #define ADD_fmt		(HI(17) | FMT_SD | LO(0))
-#define ADDU		(HI(0) | LO(33))
 #define ADDIU		(HI(9))
+#define ADDU		(HI(0) | LO(33))
 #define AND		(HI(0) | LO(36))
 #define ANDI		(HI(12))
 #define B		(HI(4))
@@ -116,9 +116,25 @@ static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 4] = {
 #define C_UEQ_fmt	(HI(17) | FMT_SD | LO(51))
 #define C_ULE_fmt	(HI(17) | FMT_SD | LO(55))
 #define C_ULT_fmt	(HI(17) | FMT_SD | LO(53))
+#define DADDIU		(HI(25))
+#define DADDU		(HI(0) | LO(45))
+#define DDIV		(HI(0) | LO(30))
+#define DDIVU		(HI(0) | LO(31))
 #define DIV		(HI(0) | LO(26))
 #define DIVU		(HI(0) | LO(27))
 #define DIV_fmt		(HI(17) | FMT_SD | LO(3))
+#define DMULT		(HI(0) | LO(28))
+#define DMULTU		(HI(0) | LO(29))
+#define DSLL		(HI(0) | LO(56))
+#define DSLL32		(HI(0) | LO(60))
+#define DSLLV		(HI(0) | LO(20))
+#define DSRA		(HI(0) | LO(59))
+#define DSRA32		(HI(0) | LO(63))
+#define DSRAV		(HI(0) | LO(23))
+#define DSRL		(HI(0) | LO(58))
+#define DSRL32		(HI(0) | LO(62))
+#define DSRLV		(HI(0) | LO(22))
+#define DSUBU		(HI(0) | LO(47))
 #define J		(HI(2))
 #define JAL		(HI(3))
 #define JALR		(HI(0) | LO(9))
@@ -129,8 +145,6 @@ static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 4] = {
 #define MFHI		(HI(0) | LO(16))
 #define MFLO		(HI(0) | LO(18))
 #define MOV_fmt		(HI(17) | FMT_SD | LO(6))
-#define MOVN		(HI(0) | LO(11))
-#define MOVZ		(HI(0) | LO(10))
 #define MUL_fmt		(HI(17) | FMT_SD | LO(2))
 #define MULT		(HI(0) | LO(24))
 #define MULTU		(HI(0) | LO(25))
@@ -158,6 +172,7 @@ static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 4] = {
 
 #if (defined SLJIT_MIPS_32_64 && SLJIT_MIPS_32_64)
 #define CLZ		(HI(28) | LO(32))
+#define DCLZ		(HI(28) | LO(36))
 #define MUL		(HI(28) | LO(2))
 #define SEB		(HI(31) | (16 << 6) | LO(32))
 #define SEH		(HI(31) | (24 << 6) | LO(32))
@@ -198,15 +213,20 @@ static SLJIT_INLINE sljit_ins invert_branch(sljit_si flags)
 	return (flags & IS_BIT26_COND) ? (1 << 26) : (1 << 16);
 }
 
-static SLJIT_INLINE sljit_ins* optimize_jump(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
+static SLJIT_INLINE sljit_ins* detect_jump_type(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
 {
 	sljit_sw diff;
 	sljit_uw target_addr;
 	sljit_ins *inst;
 	sljit_ins saved_inst;
 
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+	if (jump->flags & (SLJIT_REWRITABLE_JUMP | IS_CALL))
+		return code_ptr;
+#else
 	if (jump->flags & SLJIT_REWRITABLE_JUMP)
 		return code_ptr;
+#endif
 
 	if (jump->flags & JUMP_ADDR)
 		target_addr = jump->u.target;
@@ -218,6 +238,11 @@ static SLJIT_INLINE sljit_ins* optimize_jump(struct sljit_jump *jump, sljit_ins
 	if (jump->flags & IS_COND)
 		inst--;
 
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+	if (jump->flags & IS_CALL)
+		goto keep_address;
+#endif
+
 	/* B instructions. */
 	if (jump->flags & IS_MOVABLE) {
 		diff = ((sljit_sw)target_addr - (sljit_sw)(inst)) >> 2;
@@ -237,24 +262,34 @@ static SLJIT_INLINE sljit_ins* optimize_jump(struct sljit_jump *jump, sljit_ins
 			return inst;
 		}
 	}
+	else {
+		diff = ((sljit_sw)target_addr - (sljit_sw)(inst + 1)) >> 2;
+		if (diff <= SIMM_MAX && diff >= SIMM_MIN) {
+			jump->flags |= PATCH_B;
 
-	diff = ((sljit_sw)target_addr - (sljit_sw)(inst + 1)) >> 2;
-	if (diff <= SIMM_MAX && diff >= SIMM_MIN) {
-		jump->flags |= PATCH_B;
-
-		if (!(jump->flags & IS_COND)) {
-			inst[0] = (jump->flags & IS_JAL) ? BAL : B;
+			if (!(jump->flags & IS_COND)) {
+				inst[0] = (jump->flags & IS_JAL) ? BAL : B;
+				inst[1] = NOP;
+				return inst + 1;
+			}
+			inst[0] = inst[0] ^ invert_branch(jump->flags);
 			inst[1] = NOP;
+			jump->addr -= sizeof(sljit_ins);
 			return inst + 1;
 		}
-		inst[0] = inst[0] ^ invert_branch(jump->flags);
-		inst[1] = NOP;
-		jump->addr -= sizeof(sljit_ins);
-		return inst + 1;
 	}
 
 	if (jump->flags & IS_COND) {
-		if ((target_addr & ~0xfffffff) == ((jump->addr + 3 * sizeof(sljit_ins)) & ~0xfffffff)) {
+		if ((jump->flags & IS_MOVABLE) && (target_addr & ~0xfffffff) == ((jump->addr + 2 * sizeof(sljit_ins)) & ~0xfffffff)) {
+			jump->flags |= PATCH_J;
+			saved_inst = inst[0];
+			inst[0] = inst[-1];
+			inst[-1] = (saved_inst & 0xffff0000) | 3;
+			inst[1] = J;
+			inst[2] = NOP;
+			return inst + 2;
+		}
+		else if ((target_addr & ~0xfffffff) == ((jump->addr + 3 * sizeof(sljit_ins)) & ~0xfffffff)) {
 			jump->flags |= PATCH_J;
 			inst[0] = (inst[0] & 0xffff0000) | 3;
 			inst[1] = NOP;
@@ -263,26 +298,48 @@ static SLJIT_INLINE sljit_ins* optimize_jump(struct sljit_jump *jump, sljit_ins
 			jump->addr += sizeof(sljit_ins);
 			return inst + 3;
 		}
-		return code_ptr;
 	}
-
-	/* J instuctions. */
-	if (jump->flags & IS_MOVABLE) {
-		if ((target_addr & ~0xfffffff) == (jump->addr & ~0xfffffff)) {
+	else {
+		/* J instuctions. */
+		if ((jump->flags & IS_MOVABLE) && (target_addr & ~0xfffffff) == (jump->addr & ~0xfffffff)) {
 			jump->flags |= PATCH_J;
 			inst[0] = inst[-1];
 			inst[-1] = (jump->flags & IS_JAL) ? JAL : J;
 			jump->addr -= sizeof(sljit_ins);
 			return inst;
 		}
+
+		if ((target_addr & ~0xfffffff) == ((jump->addr + sizeof(sljit_ins)) & ~0xfffffff)) {
+			jump->flags |= PATCH_J;
+			inst[0] = (jump->flags & IS_JAL) ? JAL : J;
+			inst[1] = NOP;
+			return inst + 1;
+		}
 	}
 
-	if ((target_addr & ~0xfffffff) == ((jump->addr + sizeof(sljit_ins)) & ~0xfffffff)) {
-		jump->flags |= PATCH_J;
-		inst[0] = (jump->flags & IS_JAL) ? JAL : J;
-		inst[1] = NOP;
-		return inst + 1;
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+keep_address:
+	if (target_addr <= 0x7fffffff) {
+		jump->flags |= PATCH_ABS32;
+		if (jump->flags & IS_COND) {
+			inst[0] -= 4;
+			inst++;
+		}
+		inst[2] = inst[6];
+		inst[3] = inst[7];
+		return inst + 3;
+	}
+	if (target_addr <= 0x7fffffffffffl) {
+		jump->flags |= PATCH_ABS48;
+		if (jump->flags & IS_COND) {
+			inst[0] -= 2;
+			inst++;
+		}
+		inst[4] = inst[6];
+		inst[5] = inst[7];
+		return inst + 5;
 	}
+#endif
 
 	return code_ptr;
 }
@@ -340,9 +397,9 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 				jump->addr = (sljit_uw)(code_ptr - 3);
 #else
-#error "Implementation required"
+				jump->addr = (sljit_uw)(code_ptr - 7);
 #endif
-				code_ptr = optimize_jump(jump, code_ptr, code);
+				code_ptr = detect_jump_type(jump, code_ptr, code);
 				jump = jump->next;
 			}
 			if (const_ && const_->addr == word_count) {
@@ -391,7 +448,23 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 			buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 16) & 0xffff);
 			buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | (addr & 0xffff);
 #else
-#error "Implementation required"
+			if (jump->flags & PATCH_ABS32) {
+				SLJIT_ASSERT(addr <= 0x7fffffff);
+				buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 16) & 0xffff);
+				buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | (addr & 0xffff);
+			}
+			else if (jump->flags & PATCH_ABS48) {
+				SLJIT_ASSERT(addr <= 0x7fffffffffffl);
+				buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 32) & 0xffff);
+				buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | ((addr >> 16) & 0xffff);
+				buf_ptr[3] = (buf_ptr[3] & 0xffff0000) | (addr & 0xffff);
+			}
+			else {
+				buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 48) & 0xffff);
+				buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | ((addr >> 32) & 0xffff);
+				buf_ptr[3] = (buf_ptr[3] & 0xffff0000) | ((addr >> 16) & 0xffff);
+				buf_ptr[5] = (buf_ptr[5] & 0xffff0000) | (addr & 0xffff);
+			}
 #endif
 		} while (0);
 		jump = jump->next;
@@ -473,7 +546,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compil
 #endif
 
 	local_size += (saveds + 1 + 4) * sizeof(sljit_sw);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 	local_size = (local_size + 15) & ~0xf;
+#else
+	local_size = (local_size + 31) & ~0x1f;
+#endif
 	compiler->local_size = local_size;
 
 	if (local_size <= SIMM_MAX) {
@@ -523,7 +600,11 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
 #endif
 
 	local_size += (saveds + 1 + 4) * sizeof(sljit_sw);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 	compiler->local_size = (local_size + 15) & ~0xf;
+#else
+	compiler->local_size = (local_size + 31) & ~0x1f;
+#endif
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -612,11 +693,11 @@ static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si flags,
 {
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
-	if ((!(flags & WRITE_BACK) || !(arg & 0xf)) && !(arg & 0xf0) && argw <= SIMM_MAX && argw >= SIMM_MIN) {
+	if ((!(flags & WRITE_BACK) || !(arg & REG_MASK)) && !(arg & OFFS_REG_MASK) && argw <= SIMM_MAX && argw >= SIMM_MIN) {
 		/* Works for both absoulte and relative addresses. */
 		if (SLJIT_UNLIKELY(flags & ARG_TEST))
 			return 1;
-		FAIL_IF(push_inst(compiler, data_transfer_insts[flags & MEM_MASK] | S(arg & 0xf)
+		FAIL_IF(push_inst(compiler, data_transfer_insts[flags & MEM_MASK] | S(arg & REG_MASK)
 			| TA(reg_ar) | IMM(argw), ((flags & MEM_MASK) <= GPR_REG && (flags & LOAD_DATA)) ? reg_ar : MOVABLE_INS));
 		return -1;
 	}
@@ -631,10 +712,10 @@ static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_
 	SLJIT_ASSERT((arg & SLJIT_MEM) && (next_arg & SLJIT_MEM));
 
 	/* Simple operation except for updates. */
-	if (arg & 0xf0) {
+	if (arg & OFFS_REG_MASK) {
 		argw &= 0x3;
 		next_argw &= 0x3;
-		if (argw && argw == next_argw && (arg == next_arg || (arg & 0xf0) == (next_arg & 0xf0)))
+		if (argw && argw == next_argw && (arg == next_arg || (arg & OFFS_REG_MASK) == (next_arg & OFFS_REG_MASK)))
 			return 1;
 		return 0;
 	}
@@ -666,9 +747,9 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 		tmp_ar = DR(TMP_REG1);
 		delay_slot = MOVABLE_INS;
 	}
-	base = arg & 0xf;
+	base = arg & REG_MASK;
 
-	if (SLJIT_UNLIKELY(arg & 0xf0)) {
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
 		argw &= 0x3;
 		if ((flags & WRITE_BACK) && reg_ar == DR(base)) {
 			SLJIT_ASSERT(!(flags & LOAD_DATA) && DR(TMP_REG1) != reg_ar);
@@ -681,7 +762,7 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 			if (!(flags & WRITE_BACK)) {
 				if (arg == compiler->cache_arg)
 					return push_inst(compiler, data_transfer_insts[flags & MEM_MASK] | S(TMP_REG3) | TA(reg_ar), delay_slot);
-				if ((SLJIT_MEM | (arg & 0xf0)) == compiler->cache_arg) {
+				if ((SLJIT_MEM | (arg & OFFS_REG_MASK)) == compiler->cache_arg) {
 					if (arg == next_arg && argw == (next_argw & 0x3)) {
 						compiler->cache_arg = arg;
 						compiler->cache_argw = argw;
@@ -693,7 +774,7 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 				}
 			}
 			else {
-				if ((SLJIT_MEM | (arg & 0xf0)) == compiler->cache_arg) {
+				if ((SLJIT_MEM | (arg & OFFS_REG_MASK)) == compiler->cache_arg) {
 					FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(TMP_REG3) | D(base), DR(base)));
 					return push_inst(compiler, data_transfer_insts[flags & MEM_MASK] | S(base) | TA(reg_ar), delay_slot);
 				}
@@ -701,23 +782,23 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 		}
 
 		if (SLJIT_UNLIKELY(argw)) {
-			compiler->cache_arg = SLJIT_MEM | (arg & 0xf0);
+			compiler->cache_arg = SLJIT_MEM | (arg & OFFS_REG_MASK);
 			compiler->cache_argw = argw;
-			FAIL_IF(push_inst(compiler, SLL_W | T((arg >> 4) & 0xf) | D(TMP_REG3) | SH_IMM(argw), DR(TMP_REG3)));
+			FAIL_IF(push_inst(compiler, SLL_W | T(OFFS_REG(arg)) | D(TMP_REG3) | SH_IMM(argw), DR(TMP_REG3)));
 		}
 
 		if (!(flags & WRITE_BACK)) {
 			if (arg == next_arg && argw == (next_argw & 0x3)) {
 				compiler->cache_arg = arg;
 				compiler->cache_argw = argw;
-				FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(!argw ? ((arg >> 4) & 0xf) : TMP_REG3) | D(TMP_REG3), DR(TMP_REG3)));
+				FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(!argw ? OFFS_REG(arg) : TMP_REG3) | D(TMP_REG3), DR(TMP_REG3)));
 				tmp_ar = DR(TMP_REG3);
 			}
 			else
-				FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(!argw ? ((arg >> 4) & 0xf) : TMP_REG3) | DA(tmp_ar), tmp_ar));
+				FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(!argw ? OFFS_REG(arg) : TMP_REG3) | DA(tmp_ar), tmp_ar));
 			return push_inst(compiler, data_transfer_insts[flags & MEM_MASK] | SA(tmp_ar) | TA(reg_ar), delay_slot);
 		}
-		FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(!argw ? ((arg >> 4) & 0xf) : TMP_REG3) | D(base), DR(base)));
+		FAIL_IF(push_inst(compiler, ADDU_W | S(base) | T(!argw ? OFFS_REG(arg) : TMP_REG3) | D(base), DR(base)));
 		return push_inst(compiler, data_transfer_insts[flags & MEM_MASK] | S(base) | TA(reg_ar), delay_slot);
 	}
 
@@ -829,7 +910,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 		if (GET_FLAGS(op))
 			flags |= UNUSED_DEST;
 	}
-	else if (dst <= TMP_REG3) {
+	else if (FAST_IS_REG(dst)) {
 		dst_r = dst;
 		flags |= REG_DEST;
 		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -862,7 +943,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 	}
 
 	/* Source 1. */
-	if (src1 <= TMP_REG3) {
+	if (FAST_IS_REG(src1)) {
 		src1_r = src1;
 		flags |= REG1_SOURCE;
 	}
@@ -883,7 +964,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 	}
 
 	/* Source 2. */
-	if (src2 <= TMP_REG3) {
+	if (FAST_IS_REG(src2)) {
 		src2_r = src2;
 		flags |= REG2_SOURCE;
 		if (!(flags & REG_DEST) && op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -941,6 +1022,10 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
 {
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+	sljit_si int_op = op & SLJIT_INT_OP;
+#endif
+
 	CHECK_ERROR();
 	check_sljit_emit_op0(compiler, op);
 
@@ -952,7 +1037,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 		return push_inst(compiler, NOP, UNMOVABLE_INS);
 	case SLJIT_UMUL:
 	case SLJIT_SMUL:
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+		FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? DMULTU : DMULT) | S(SLJIT_SCRATCH_REG1) | T(SLJIT_SCRATCH_REG2), MOVABLE_INS));
+#else
 		FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? MULTU : MULT) | S(SLJIT_SCRATCH_REG1) | T(SLJIT_SCRATCH_REG2), MOVABLE_INS));
+#endif
 		FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_SCRATCH_REG1), DR(SLJIT_SCRATCH_REG1)));
 		return push_inst(compiler, MFHI | D(SLJIT_SCRATCH_REG2), DR(SLJIT_SCRATCH_REG2));
 	case SLJIT_UDIV:
@@ -961,7 +1050,16 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 		FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
 		FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
 #endif
+
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+		if (int_op)
+			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVU : DIV) | S(SLJIT_SCRATCH_REG1) | T(SLJIT_SCRATCH_REG2), MOVABLE_INS));
+		else
+			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DDIVU : DDIV) | S(SLJIT_SCRATCH_REG1) | T(SLJIT_SCRATCH_REG2), MOVABLE_INS));
+#else
 		FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVU : DIV) | S(SLJIT_SCRATCH_REG1) | T(SLJIT_SCRATCH_REG2), MOVABLE_INS));
+#endif
+
 		FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_SCRATCH_REG1), DR(SLJIT_SCRATCH_REG1)));
 		return push_inst(compiler, MFHI | D(SLJIT_SCRATCH_REG2), DR(SLJIT_SCRATCH_REG2));
 	}
@@ -975,6 +1073,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 {
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 #	define flags 0
+#else
+	sljit_si flags = 0;
 #endif
 
 	CHECK_ERROR();
@@ -982,50 +1082,74 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+	if ((op & SLJIT_INT_OP) && GET_OPCODE(op) >= SLJIT_NOT) {
+		flags |= INT_DATA | SIGNED_DATA;
+		if (src & SLJIT_IMM)
+			srcw = (sljit_si)srcw;
+	}
+#endif
+
 	switch (GET_OPCODE(op)) {
 	case SLJIT_MOV:
 	case SLJIT_MOV_P:
-		return emit_op(compiler, SLJIT_MOV, flags | WORD_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+		return emit_op(compiler, SLJIT_MOV, WORD_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
 
 	case SLJIT_MOV_UI:
-		return emit_op(compiler, SLJIT_MOV_UI, flags | INT_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+		return emit_op(compiler, SLJIT_MOV_UI, INT_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+#else
+		return emit_op(compiler, SLJIT_MOV_UI, INT_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ui)srcw : srcw);
+#endif
 
 	case SLJIT_MOV_SI:
-		return emit_op(compiler, SLJIT_MOV_SI, flags | INT_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+		return emit_op(compiler, SLJIT_MOV_SI, INT_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+#else
+		return emit_op(compiler, SLJIT_MOV_SI, INT_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_si)srcw : srcw);
+#endif
 
 	case SLJIT_MOV_UB:
-		return emit_op(compiler, SLJIT_MOV_UB, flags | BYTE_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ub)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_UB, BYTE_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ub)srcw : srcw);
 
 	case SLJIT_MOV_SB:
-		return emit_op(compiler, SLJIT_MOV_SB, flags | BYTE_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sb)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_SB, BYTE_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sb)srcw : srcw);
 
 	case SLJIT_MOV_UH:
-		return emit_op(compiler, SLJIT_MOV_UH, flags | HALF_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_uh)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_UH, HALF_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_uh)srcw : srcw);
 
 	case SLJIT_MOV_SH:
-		return emit_op(compiler, SLJIT_MOV_SH, flags | HALF_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sh)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_SH, HALF_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sh)srcw : srcw);
 
 	case SLJIT_MOVU:
 	case SLJIT_MOVU_P:
-		return emit_op(compiler, SLJIT_MOV, flags | WORD_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+		return emit_op(compiler, SLJIT_MOV, WORD_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
 
 	case SLJIT_MOVU_UI:
-		return emit_op(compiler, SLJIT_MOV_UI, flags | INT_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+		return emit_op(compiler, SLJIT_MOV_UI, INT_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+#else
+		return emit_op(compiler, SLJIT_MOV_UI, INT_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ui)srcw : srcw);
+#endif
 
 	case SLJIT_MOVU_SI:
-		return emit_op(compiler, SLJIT_MOV_SI, flags | INT_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+		return emit_op(compiler, SLJIT_MOV_SI, INT_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+#else
+		return emit_op(compiler, SLJIT_MOV_SI, INT_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_si)srcw : srcw);
+#endif
 
 	case SLJIT_MOVU_UB:
-		return emit_op(compiler, SLJIT_MOV_UB, flags | BYTE_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ub)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_UB, BYTE_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ub)srcw : srcw);
 
 	case SLJIT_MOVU_SB:
-		return emit_op(compiler, SLJIT_MOV_SB, flags | BYTE_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sb)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_SB, BYTE_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sb)srcw : srcw);
 
 	case SLJIT_MOVU_UH:
-		return emit_op(compiler, SLJIT_MOV_UH, flags | HALF_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_uh)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_UH, HALF_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_uh)srcw : srcw);
 
 	case SLJIT_MOVU_SH:
-		return emit_op(compiler, SLJIT_MOV_SH, flags | HALF_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sh)srcw : srcw);
+		return emit_op(compiler, SLJIT_MOV_SH, HALF_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sh)srcw : srcw);
 
 	case SLJIT_NOT:
 		return emit_op(compiler, op, flags, dst, dstw, TMP_REG1, 0, src, srcw);
@@ -1038,6 +1162,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 	}
 
 	return SLJIT_SUCCESS;
+
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 #	undef flags
 #endif
@@ -1050,6 +1175,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 {
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 #	define flags 0
+#else
+	sljit_si flags = 0;
 #endif
 
 	CHECK_ERROR();
@@ -1058,6 +1185,16 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
 
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+	if (op & SLJIT_INT_OP) {
+		flags |= INT_DATA | SIGNED_DATA;
+		if (src1 & SLJIT_IMM)
+			src1w = (sljit_si)src1w;
+		if (src2 & SLJIT_IMM)
+			src2w = (sljit_si)src2w;
+	}
+#endif
+
 	switch (GET_OPCODE(op)) {
 	case SLJIT_ADD:
 	case SLJIT_ADDC:
@@ -1082,12 +1219,18 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 		if (src2 & SLJIT_IMM)
 			src2w &= 0x1f;
 #else
-		SLJIT_ASSERT_STOP();
+		if (src2 & SLJIT_IMM) {
+			if (op & SLJIT_INT_OP)
+				src2w &= 0x1f;
+			else
+				src2w &= 0x3f;
+		}
 #endif
 		return emit_op(compiler, op, flags | IMM_OP, dst, dstw, src1, src1w, src2, src2w);
 	}
 
 	return SLJIT_SUCCESS;
+
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 #	undef flags
 #endif
@@ -1121,9 +1264,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *co
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
 {
-#if (defined SLJIT_QEMU && SLJIT_QEMU)
-	/* Qemu says fir is 0 by default. */
-	return 1;
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
 #elif defined(__GNUC__)
 	sljit_sw fir;
 	asm ("cfc1 %0, $0" : "=r"(fir));
@@ -1150,14 +1292,14 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 	compiler->cache_argw = 0;
 
 	if (GET_OPCODE(op) == SLJIT_CMPD) {
-		if (dst > SLJIT_FLOAT_REG6) {
+		if (dst & SLJIT_MEM) {
 			FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG1, dst, dstw, src, srcw));
 			dst = TMP_FREG1;
 		}
 		else
 			dst <<= 1;
 
-		if (src > SLJIT_FLOAT_REG6) {
+		if (src & SLJIT_MEM) {
 			FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG2, src, srcw, 0, 0));
 			src = TMP_FREG2;
 		}
@@ -1185,9 +1327,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 		return push_inst(compiler, C_UN_fmt | FMT(op) | FT(src) | FS(dst), FCSR_FCC);
 	}
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : (dst << 1);
+	dst_fr = FAST_IS_REG(dst) ? (dst << 1) : TMP_FREG1;
 
-	if (src > SLJIT_FLOAT_REG6) {
+	if (src & SLJIT_MEM) {
 		FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, dst_fr, src, srcw, dst, dstw));
 		src = dst_fr;
 	}
@@ -1229,9 +1371,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG2 : (dst << 1);
+	dst_fr = FAST_IS_REG(dst) ? (dst << 1) : TMP_FREG2;
 
-	if (src1 > SLJIT_FLOAT_REG6) {
+	if (src1 & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG1, src1, src1w)) {
 			FAIL_IF(compiler->error);
 			src1 = TMP_FREG1;
@@ -1241,7 +1383,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	else
 		src1 <<= 1;
 
-	if (src2 > SLJIT_FLOAT_REG6) {
+	if (src2 & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG2, src2, src2w)) {
 			FAIL_IF(compiler->error);
 			src2 = TMP_FREG2;
@@ -1309,7 +1451,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
 
-	if (dst <= TMP_REG3)
+	if (FAST_IS_REG(dst))
 		return push_inst(compiler, ADDU_W | SA(RETURN_ADDR_REG) | TA(0) | D(dst), DR(dst));
 
 	/* Memory. */
@@ -1322,7 +1464,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 	check_sljit_emit_fast_return(compiler, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= TMP_REG3)
+	if (FAST_IS_REG(src))
 		FAIL_IF(push_inst(compiler, ADDU_W | S(src) | TA(0) | DA(RETURN_ADDR_REG), RETURN_ADDR_REG));
 	else if (src & SLJIT_MEM)
 		FAIL_IF(emit_op_mem(compiler, WORD_DATA | LOAD_DATA, RETURN_ADDR_REG, src, srcw));
@@ -1357,7 +1499,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compi
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 #define JUMP_LENGTH	4
 #else
-#error "Implementation required"
+#define JUMP_LENGTH	8
 #endif
 
 #define BR_Z(src) \
@@ -1467,7 +1609,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compile
 	} else {
 		SLJIT_ASSERT(DR(PIC_ADDR_REG) == 25 && PIC_ADDR_REG == TMP_REG2);
 		/* Cannot be optimized out if type is >= CALL0. */
-		jump->flags |= IS_JAL | (type >= SLJIT_CALL0 ? SLJIT_REWRITABLE_JUMP : 0);
+		jump->flags |= IS_JAL | (type >= SLJIT_CALL0 ? IS_CALL : 0);
 		PTR_FAIL_IF(push_inst(compiler, JALR | S(TMP_REG2) | DA(RETURN_ADDR_REG), UNMOVABLE_INS));
 		jump->addr = compiler->size;
 		/* A NOP if type < CALL1. */
@@ -1631,14 +1773,14 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compile
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 
-	if (src1 > SLJIT_FLOAT_REG6) {
+	if (src1 & SLJIT_MEM) {
 		PTR_FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(type) | LOAD_DATA, TMP_FREG1, src1, src1w, src2, src2w));
 		src1 = TMP_FREG1;
 	}
 	else
 		src1 <<= 1;
 
-	if (src2 > SLJIT_FLOAT_REG6) {
+	if (src2 & SLJIT_MEM) {
 		PTR_FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(type) | LOAD_DATA, TMP_FREG2, src2, src2w, 0, 0));
 		src2 = TMP_FREG2;
 	}
@@ -1714,7 +1856,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 	check_sljit_emit_ijump(compiler, type, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= TMP_REG3) {
+	if (FAST_IS_REG(src)) {
 		if (DR(src) != 4)
 			src_r = src;
 		else
@@ -1770,6 +1912,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 {
 	sljit_si sugg_dst_ar, dst_ar;
 	sljit_si flags = GET_ALL_FLAGS(op);
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#	define mem_type WORD_DATA
+#else
+	sljit_si mem_type = (op & SLJIT_INT_OP) ? (INT_DATA | SIGNED_DATA) : WORD_DATA;
+#endif
 
 	CHECK_ERROR();
 	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
@@ -1779,13 +1926,17 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 		return SLJIT_SUCCESS;
 
 	op = GET_OPCODE(op);
-	sugg_dst_ar = DR((op < SLJIT_ADD && dst <= TMP_REG3) ? dst : TMP_REG2);
+#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+	if (op == SLJIT_MOV_SI || op == SLJIT_MOV_UI)
+		mem_type = INT_DATA | SIGNED_DATA;
+#endif
+	sugg_dst_ar = DR((op < SLJIT_ADD && FAST_IS_REG(dst)) ? dst : TMP_REG2);
 
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 	if (op >= SLJIT_ADD && (src & SLJIT_MEM)) {
 		ADJUST_LOCAL_OFFSET(src, srcw);
-		FAIL_IF(emit_op_mem2(compiler, WORD_DATA | LOAD_DATA, DR(TMP_REG1), src, srcw, dst, dstw));
+		FAIL_IF(emit_op_mem2(compiler, mem_type | LOAD_DATA, DR(TMP_REG1), src, srcw, dst, dstw));
 		src = TMP_REG1;
 		srcw = 0;
 	}
@@ -1853,15 +2004,19 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	if (op >= SLJIT_ADD) {
 		if (DR(TMP_REG2) != dst_ar)
 			FAIL_IF(push_inst(compiler, ADDU_W | SA(dst_ar) | TA(0) | D(TMP_REG2), DR(TMP_REG2)));
-		return emit_op(compiler, op | flags, CUMULATIVE_OP | LOGICAL_OP | IMM_OP | ALT_KEEP_CACHE, dst, dstw, src, srcw, TMP_REG2, 0);
+		return emit_op(compiler, op | flags, mem_type | CUMULATIVE_OP | LOGICAL_OP | IMM_OP | ALT_KEEP_CACHE, dst, dstw, src, srcw, TMP_REG2, 0);
 	}
 
 	if (dst & SLJIT_MEM)
-		return emit_op_mem(compiler, WORD_DATA, dst_ar, dst, dstw);
+		return emit_op_mem(compiler, mem_type, dst_ar, dst, dstw);
 
 	if (sugg_dst_ar != dst_ar)
 		return push_inst(compiler, ADDU_W | SA(dst_ar) | TA(0) | DA(sugg_dst_ar), sugg_dst_ar);
 	return SLJIT_SUCCESS;
+
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#	undef mem_type
+#endif
 }
 
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
@@ -1877,7 +2032,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 	PTR_FAIL_IF(!const_);
 	set_const(const_, compiler);
 
-	reg = (dst <= TMP_REG3) ? dst : TMP_REG2;
+	reg = SLOW_IS_REG(dst) ? dst : TMP_REG2;
 
 	PTR_FAIL_IF(emit_const(compiler, reg, init_value));
 
diff --git a/src/3rdparty/pcre/sljit/sljitNativePPC_32.c b/src/3rdparty/pcre/sljit/sljitNativePPC_32.c
index 0bd35a6e0e..b14b75ceb5 100644
--- a/src/3rdparty/pcre/sljit/sljitNativePPC_32.c
+++ b/src/3rdparty/pcre/sljit/sljitNativePPC_32.c
@@ -32,7 +32,7 @@ static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si reg, sl
 		return push_inst(compiler, ADDI | D(reg) | A(0) | IMM(imm));
 
 	if (!(imm & ~0xffff))
-		return push_inst(compiler, ORI | S(ZERO_REG) | A(reg) | IMM(imm));
+		return push_inst(compiler, ORI | S(TMP_ZERO) | A(reg) | IMM(imm));
 
 	FAIL_IF(push_inst(compiler, ADDIS | D(reg) | A(0) | IMM(imm >> 16)));
 	return (imm & 0xffff) ? push_inst(compiler, ORI | S(reg) | A(reg) | IMM(imm)) : SLJIT_SUCCESS;
diff --git a/src/3rdparty/pcre/sljit/sljitNativePPC_64.c b/src/3rdparty/pcre/sljit/sljitNativePPC_64.c
index 8eaeb41f4e..182ac7b3da 100644
--- a/src/3rdparty/pcre/sljit/sljitNativePPC_64.c
+++ b/src/3rdparty/pcre/sljit/sljitNativePPC_64.c
@@ -52,9 +52,9 @@ static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si reg, sl
 		return push_inst(compiler, ADDI | D(reg) | A(0) | IMM(imm));
 
 	if (!(imm & ~0xffff))
-		return push_inst(compiler, ORI | S(ZERO_REG) | A(reg) | IMM(imm));
+		return push_inst(compiler, ORI | S(TMP_ZERO) | A(reg) | IMM(imm));
 
-	if (imm <= SLJIT_W(0x7fffffff) && imm >= SLJIT_W(-0x80000000)) {
+	if (imm <= 0x7fffffffl && imm >= -0x80000000l) {
 		FAIL_IF(push_inst(compiler, ADDIS | D(reg) | A(0) | IMM(imm >> 16)));
 		return (imm & 0xffff) ? push_inst(compiler, ORI | S(reg) | A(reg) | IMM(imm)) : SLJIT_SUCCESS;
 	}
diff --git a/src/3rdparty/pcre/sljit/sljitNativePPC_common.c b/src/3rdparty/pcre/sljit/sljitNativePPC_common.c
index 67e6898a17..5e06f2fd8e 100644
--- a/src/3rdparty/pcre/sljit/sljitNativePPC_common.c
+++ b/src/3rdparty/pcre/sljit/sljitNativePPC_common.c
@@ -33,10 +33,19 @@ SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char* sljit_get_platform_name(void)
    Both for ppc-32 and ppc-64. */
 typedef sljit_ui sljit_ins;
 
+#if ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && (defined _AIX)) \
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#define SLJIT_PPC_STACK_FRAME_V2 1
+#endif
+
 #ifdef _AIX
 #include <sys/cache.h>
 #endif
 
+#if (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
+#define SLJIT_PASS_ENTRY_ADDR_TO_CALL 1
+#endif
+
 static void ppc_cache_flush(sljit_ins *from, sljit_ins *to)
 {
 #ifdef _AIX
@@ -81,13 +90,19 @@ static void ppc_cache_flush(sljit_ins *from, sljit_ins *to)
 #define TMP_REG1	(SLJIT_NO_REGISTERS + 1)
 #define TMP_REG2	(SLJIT_NO_REGISTERS + 2)
 #define TMP_REG3	(SLJIT_NO_REGISTERS + 3)
-#define ZERO_REG	(SLJIT_NO_REGISTERS + 4)
+#define TMP_ZERO	(SLJIT_NO_REGISTERS + 4)
+
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL)
+#define TMP_CALL_REG	(SLJIT_NO_REGISTERS + 5)
+#else
+#define TMP_CALL_REG	TMP_REG2
+#endif
 
 #define TMP_FREG1	(0)
 #define TMP_FREG2	(SLJIT_FLOAT_REG6 + 1)
 
-static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 5] = {
-	0, 3, 4, 5, 6, 7, 30, 29, 28, 27, 26, 1, 8, 9, 10, 31
+static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 6] = {
+	0, 3, 4, 5, 6, 7, 30, 29, 28, 27, 26, 1, 8, 9, 10, 31, 12
 };
 
 /* --------------------------------------------------------------------- */
@@ -224,13 +239,19 @@ static sljit_si push_inst(struct sljit_compiler *compiler, sljit_ins ins)
 	return SLJIT_SUCCESS;
 }
 
-static SLJIT_INLINE sljit_si optimize_jump(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
+static SLJIT_INLINE sljit_si detect_jump_type(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
 {
 	sljit_sw diff;
 	sljit_uw target_addr;
+	sljit_sw extra_jump_flags;
 
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL) && (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+	if (jump->flags & (SLJIT_REWRITABLE_JUMP | IS_CALL))
+		return 0;
+#else
 	if (jump->flags & SLJIT_REWRITABLE_JUMP)
 		return 0;
+#endif
 
 	if (jump->flags & JUMP_ADDR)
 		target_addr = jump->u.target;
@@ -238,28 +259,52 @@ static SLJIT_INLINE sljit_si optimize_jump(struct sljit_jump *jump, sljit_ins *c
 		SLJIT_ASSERT(jump->flags & JUMP_LABEL);
 		target_addr = (sljit_uw)(code + jump->u.label->size);
 	}
+
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL) && (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	if (jump->flags & IS_CALL)
+		goto keep_address;
+#endif
+
 	diff = ((sljit_sw)target_addr - (sljit_sw)(code_ptr)) & ~0x3l;
 
-	if (jump->flags & UNCOND_B) {
-		if (diff <= 0x01ffffff && diff >= -0x02000000) {
-			jump->flags |= PATCH_B;
-			return 1;
-		}
-		if (target_addr <= 0x03ffffff) {
-			jump->flags |= PATCH_B | ABSOLUTE_B;
-			return 1;
-		}
-	}
-	else {
+	extra_jump_flags = 0;
+	if (jump->flags & IS_COND) {
 		if (diff <= 0x7fff && diff >= -0x8000) {
 			jump->flags |= PATCH_B;
 			return 1;
 		}
 		if (target_addr <= 0xffff) {
-			jump->flags |= PATCH_B | ABSOLUTE_B;
+			jump->flags |= PATCH_B | PATCH_ABS_B;
 			return 1;
 		}
+		extra_jump_flags = REMOVE_COND;
+
+		diff -= sizeof(sljit_ins);
+	}
+
+	if (diff <= 0x01ffffff && diff >= -0x02000000) {
+		jump->flags |= PATCH_B | extra_jump_flags;
+		return 1;
 	}
+	if (target_addr <= 0x03ffffff) {
+		jump->flags |= PATCH_B | PATCH_ABS_B | extra_jump_flags;
+		return 1;
+	}
+
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL)
+keep_address:
+#endif
+	if (target_addr <= 0x7fffffff) {
+		jump->flags |= PATCH_ABS32;
+		return 1;
+	}
+	if (target_addr <= 0x7fffffffffffl) {
+		jump->flags |= PATCH_ABS48;
+		return 1;
+	}
+#endif
+
 	return 0;
 }
 
@@ -318,19 +363,42 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 #else
 				jump->addr = (sljit_uw)(code_ptr - 6);
 #endif
-				if (optimize_jump(jump, code_ptr, code)) {
+				if (detect_jump_type(jump, code_ptr, code)) {
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
 					code_ptr[-3] = code_ptr[0];
 					code_ptr -= 3;
 #else
-					code_ptr[-6] = code_ptr[0];
-					code_ptr -= 6;
+					if (jump->flags & PATCH_ABS32) {
+						code_ptr -= 3;
+						code_ptr[-1] = code_ptr[2];
+						code_ptr[0] = code_ptr[3];
+					}
+					else if (jump->flags & PATCH_ABS48) {
+						code_ptr--;
+						code_ptr[-1] = code_ptr[0];
+						code_ptr[0] = code_ptr[1];
+						/* rldicr rX,rX,32,31 -> rX,rX,16,47 */
+						SLJIT_ASSERT((code_ptr[-3] & 0xfc00ffff) == 0x780007c6);
+						code_ptr[-3] ^= 0x8422;
+						/* oris -> ori */
+						code_ptr[-2] ^= 0x4000000;
+					}
+					else {
+						code_ptr[-6] = code_ptr[0];
+						code_ptr -= 6;
+					}
 #endif
+					if (jump->flags & REMOVE_COND) {
+						code_ptr[0] = BCx | (2 << 2) | ((code_ptr[0] ^ (8 << 21)) & 0x03ff0001);
+						code_ptr++;
+						jump->addr += sizeof(sljit_ins);
+						code_ptr[0] = Bx;
+						jump->flags -= IS_COND;
+					}
 				}
 				jump = jump->next;
 			}
 			if (const_ && const_->addr == word_count) {
-				/* Just recording the address. */
 				const_->addr = (sljit_uw)code_ptr;
 				const_ = const_->next;
 			}
@@ -362,29 +430,27 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 			addr = (jump->flags & JUMP_LABEL) ? jump->u.label->addr : jump->u.target;
 			buf_ptr = (sljit_ins*)jump->addr;
 			if (jump->flags & PATCH_B) {
-				if (jump->flags & UNCOND_B) {
-					if (!(jump->flags & ABSOLUTE_B)) {
+				if (jump->flags & IS_COND) {
+					if (!(jump->flags & PATCH_ABS_B)) {
 						addr = addr - jump->addr;
-						SLJIT_ASSERT((sljit_sw)addr <= 0x01ffffff && (sljit_sw)addr >= -0x02000000);
-						*buf_ptr = Bx | (addr & 0x03fffffc) | ((*buf_ptr) & 0x1);
+						SLJIT_ASSERT((sljit_sw)addr <= 0x7fff && (sljit_sw)addr >= -0x8000);
+						*buf_ptr = BCx | (addr & 0xfffc) | ((*buf_ptr) & 0x03ff0001);
 					}
 					else {
-						SLJIT_ASSERT(addr <= 0x03ffffff);
-						*buf_ptr = Bx | (addr & 0x03fffffc) | 0x2 | ((*buf_ptr) & 0x1);
+						SLJIT_ASSERT(addr <= 0xffff);
+						*buf_ptr = BCx | (addr & 0xfffc) | 0x2 | ((*buf_ptr) & 0x03ff0001);
 					}
 				}
 				else {
-					if (!(jump->flags & ABSOLUTE_B)) {
+					if (!(jump->flags & PATCH_ABS_B)) {
 						addr = addr - jump->addr;
-						SLJIT_ASSERT((sljit_sw)addr <= 0x7fff && (sljit_sw)addr >= -0x8000);
-						*buf_ptr = BCx | (addr & 0xfffc) | ((*buf_ptr) & 0x03ff0001);
+						SLJIT_ASSERT((sljit_sw)addr <= 0x01ffffff && (sljit_sw)addr >= -0x02000000);
+						*buf_ptr = Bx | (addr & 0x03fffffc) | ((*buf_ptr) & 0x1);
 					}
 					else {
-						addr = addr & ~0x3l;
-						SLJIT_ASSERT(addr <= 0xffff);
-						*buf_ptr = BCx | (addr & 0xfffc) | 0x2 | ((*buf_ptr) & 0x03ff0001);
+						SLJIT_ASSERT(addr <= 0x03ffffff);
+						*buf_ptr = Bx | (addr & 0x03fffffc) | 0x2 | ((*buf_ptr) & 0x1);
 					}
-
 				}
 				break;
 			}
@@ -393,6 +459,19 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 			buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 16) & 0xffff);
 			buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | (addr & 0xffff);
 #else
+			if (jump->flags & PATCH_ABS32) {
+				SLJIT_ASSERT(addr <= 0x7fffffff);
+				buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 16) & 0xffff);
+				buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | (addr & 0xffff);
+				break;
+			}
+			if (jump->flags & PATCH_ABS48) {
+				SLJIT_ASSERT(addr <= 0x7fffffffffff);
+				buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 32) & 0xffff);
+				buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | ((addr >> 16) & 0xffff);
+				buf_ptr[3] = (buf_ptr[3] & 0xffff0000) | (addr & 0xffff);
+				break;
+			}
 			buf_ptr[0] = (buf_ptr[0] & 0xffff0000) | ((addr >> 48) & 0xffff);
 			buf_ptr[1] = (buf_ptr[1] & 0xffff0000) | ((addr >> 32) & 0xffff);
 			buf_ptr[3] = (buf_ptr[3] & 0xffff0000) | ((addr >> 16) & 0xffff);
@@ -498,7 +577,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compil
 #endif
 
 	FAIL_IF(push_inst(compiler, MFLR | D(0)));
-	FAIL_IF(push_inst(compiler, STACK_STORE | S(ZERO_REG) | A(SLJIT_LOCALS_REG) | IMM(-(sljit_si)(sizeof(sljit_sw))) ));
+	FAIL_IF(push_inst(compiler, STACK_STORE | S(TMP_ZERO) | A(SLJIT_LOCALS_REG) | IMM(-(sljit_si)(sizeof(sljit_sw))) ));
 	if (saveds >= 1)
 		FAIL_IF(push_inst(compiler, STACK_STORE | S(SLJIT_SAVED_REG1) | A(SLJIT_LOCALS_REG) | IMM(-2 * (sljit_si)(sizeof(sljit_sw))) ));
 	if (saveds >= 2)
@@ -509,9 +588,13 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compil
 		FAIL_IF(push_inst(compiler, STACK_STORE | S(SLJIT_SAVED_EREG1) | A(SLJIT_LOCALS_REG) | IMM(-5 * (sljit_si)(sizeof(sljit_sw))) ));
 	if (saveds >= 5)
 		FAIL_IF(push_inst(compiler, STACK_STORE | S(SLJIT_SAVED_EREG2) | A(SLJIT_LOCALS_REG) | IMM(-6 * (sljit_si)(sizeof(sljit_sw))) ));
+#if (defined SLJIT_PPC_STACK_FRAME_V2 && SLJIT_PPC_STACK_FRAME_V2)
+	FAIL_IF(push_inst(compiler, STACK_STORE | S(0) | A(SLJIT_LOCALS_REG) | IMM(2 * sizeof(sljit_sw)) ));
+#else
 	FAIL_IF(push_inst(compiler, STACK_STORE | S(0) | A(SLJIT_LOCALS_REG) | IMM(sizeof(sljit_sw)) ));
+#endif
 
-	FAIL_IF(push_inst(compiler, ADDI | D(ZERO_REG) | A(0) | 0));
+	FAIL_IF(push_inst(compiler, ADDI | D(TMP_ZERO) | A(0) | 0));
 	if (args >= 1)
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_SCRATCH_REG1) | A(SLJIT_SAVED_REG1) | B(SLJIT_SCRATCH_REG1)));
 	if (args >= 2)
@@ -519,7 +602,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compil
 	if (args >= 3)
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_SCRATCH_REG3) | A(SLJIT_SAVED_REG3) | B(SLJIT_SCRATCH_REG3)));
 
-#if (defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
+#if (defined SLJIT_PPC_STACK_FRAME_V2 && SLJIT_PPC_STACK_FRAME_V2)
 	compiler->local_size = (1 + saveds + 6 + 8) * sizeof(sljit_sw) + local_size;
 #else
 	compiler->local_size = (1 + saveds + 2) * sizeof(sljit_sw) + local_size;
@@ -556,7 +639,7 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
 	compiler->logical_local_size = local_size;
 #endif
 
-#if (defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
+#if (defined SLJIT_PPC_STACK_FRAME_V2 && SLJIT_PPC_STACK_FRAME_V2)
 	compiler->local_size = (1 + saveds + 6 + 8) * sizeof(sljit_sw) + local_size;
 #else
 	compiler->local_size = (1 + saveds + 2) * sizeof(sljit_sw) + local_size;
@@ -578,7 +661,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compi
 		FAIL_IF(push_inst(compiler, ADD | D(SLJIT_LOCALS_REG) | A(SLJIT_LOCALS_REG) | B(0)));
 	}
 
+#if (defined SLJIT_PPC_STACK_FRAME_V2 && SLJIT_PPC_STACK_FRAME_V2)
+	FAIL_IF(push_inst(compiler, STACK_LOAD | D(0) | A(SLJIT_LOCALS_REG) | IMM(2 * sizeof(sljit_sw))));
+#else
 	FAIL_IF(push_inst(compiler, STACK_LOAD | D(0) | A(SLJIT_LOCALS_REG) | IMM(sizeof(sljit_sw))));
+#endif
 	if (compiler->saveds >= 5)
 		FAIL_IF(push_inst(compiler, STACK_LOAD | D(SLJIT_SAVED_EREG2) | A(SLJIT_LOCALS_REG) | IMM(-6 * (sljit_si)(sizeof(sljit_sw))) ));
 	if (compiler->saveds >= 4)
@@ -589,7 +676,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compi
 		FAIL_IF(push_inst(compiler, STACK_LOAD | D(SLJIT_SAVED_REG2) | A(SLJIT_LOCALS_REG) | IMM(-3 * (sljit_si)(sizeof(sljit_sw))) ));
 	if (compiler->saveds >= 1)
 		FAIL_IF(push_inst(compiler, STACK_LOAD | D(SLJIT_SAVED_REG1) | A(SLJIT_LOCALS_REG) | IMM(-2 * (sljit_si)(sizeof(sljit_sw))) ));
-	FAIL_IF(push_inst(compiler, STACK_LOAD | D(ZERO_REG) | A(SLJIT_LOCALS_REG) | IMM(-(sljit_si)(sizeof(sljit_sw))) ));
+	FAIL_IF(push_inst(compiler, STACK_LOAD | D(TMP_ZERO) | A(SLJIT_LOCALS_REG) | IMM(-(sljit_si)(sizeof(sljit_sw))) ));
 
 	FAIL_IF(push_inst(compiler, MTLR | S(0)));
 	FAIL_IF(push_inst(compiler, BLR));
@@ -612,7 +699,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compi
    It contans 32 items, but not all are different. */
 
 /* 64 bit only: [reg+imm] must be aligned to 4 bytes. */
-#define ADDR_MODE2	0x10000
+#define INT_ALIGNED	0x10000
 /* 64-bit only: there is no lwau instruction. */
 #define UPDATE_REQ	0x20000
 
@@ -623,7 +710,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compi
 #else
 #define ARCH_32_64(a, b)	b
 #define INST_CODE_AND_DST(inst, flags, reg) \
-	(((inst) & ~(ADDR_MODE2 | UPDATE_REQ)) | (((flags) & MEM_MASK) <= GPR_REG ? D(reg) : FD(reg)))
+	(((inst) & ~(INT_ALIGNED | UPDATE_REQ)) | (((flags) & MEM_MASK) <= GPR_REG ? D(reg) : FD(reg)))
 #endif
 
 static SLJIT_CONST sljit_ins data_transfer_insts[64 + 8] = {
@@ -632,13 +719,13 @@ static SLJIT_CONST sljit_ins data_transfer_insts[64 + 8] = {
 
 /* Word. */
 
-/* u w n i s */ ARCH_32_64(HI(36) /* stw */, HI(62) | ADDR_MODE2 | 0x0 /* std */),
-/* u w n i l */ ARCH_32_64(HI(32) /* lwz */, HI(58) | ADDR_MODE2 | 0x0 /* ld */),
+/* u w n i s */ ARCH_32_64(HI(36) /* stw */, HI(62) | INT_ALIGNED | 0x0 /* std */),
+/* u w n i l */ ARCH_32_64(HI(32) /* lwz */, HI(58) | INT_ALIGNED | 0x0 /* ld */),
 /* u w n x s */ ARCH_32_64(HI(31) | LO(151) /* stwx */, HI(31) | LO(149) /* stdx */),
 /* u w n x l */ ARCH_32_64(HI(31) | LO(23) /* lwzx */, HI(31) | LO(21) /* ldx */),
 
-/* u w w i s */ ARCH_32_64(HI(37) /* stwu */, HI(62) | ADDR_MODE2 | 0x1 /* stdu */),
-/* u w w i l */ ARCH_32_64(HI(33) /* lwzu */, HI(58) | ADDR_MODE2 | 0x1 /* ldu */),
+/* u w w i s */ ARCH_32_64(HI(37) /* stwu */, HI(62) | INT_ALIGNED | 0x1 /* stdu */),
+/* u w w i l */ ARCH_32_64(HI(33) /* lwzu */, HI(58) | INT_ALIGNED | 0x1 /* ldu */),
 /* u w w x s */ ARCH_32_64(HI(31) | LO(183) /* stwux */, HI(31) | LO(181) /* stdux */),
 /* u w w x l */ ARCH_32_64(HI(31) | LO(55) /* lwzux */, HI(31) | LO(53) /* ldux */),
 
@@ -682,13 +769,13 @@ static SLJIT_CONST sljit_ins data_transfer_insts[64 + 8] = {
 
 /* Word. */
 
-/* s w n i s */ ARCH_32_64(HI(36) /* stw */, HI(62) | ADDR_MODE2 | 0x0 /* std */),
-/* s w n i l */ ARCH_32_64(HI(32) /* lwz */, HI(58) | ADDR_MODE2 | 0x0 /* ld */),
+/* s w n i s */ ARCH_32_64(HI(36) /* stw */, HI(62) | INT_ALIGNED | 0x0 /* std */),
+/* s w n i l */ ARCH_32_64(HI(32) /* lwz */, HI(58) | INT_ALIGNED | 0x0 /* ld */),
 /* s w n x s */ ARCH_32_64(HI(31) | LO(151) /* stwx */, HI(31) | LO(149) /* stdx */),
 /* s w n x l */ ARCH_32_64(HI(31) | LO(23) /* lwzx */, HI(31) | LO(21) /* ldx */),
 
-/* s w w i s */ ARCH_32_64(HI(37) /* stwu */, HI(62) | ADDR_MODE2 | 0x1 /* stdu */),
-/* s w w i l */ ARCH_32_64(HI(33) /* lwzu */, HI(58) | ADDR_MODE2 | 0x1 /* ldu */),
+/* s w w i s */ ARCH_32_64(HI(37) /* stwu */, HI(62) | INT_ALIGNED | 0x1 /* stdu */),
+/* s w w i l */ ARCH_32_64(HI(33) /* lwzu */, HI(58) | INT_ALIGNED | 0x1 /* ldu */),
 /* s w w x s */ ARCH_32_64(HI(31) | LO(183) /* stwux */, HI(31) | LO(181) /* stdux */),
 /* s w w x l */ ARCH_32_64(HI(31) | LO(55) /* lwzux */, HI(31) | LO(53) /* ldux */),
 
@@ -719,12 +806,12 @@ static SLJIT_CONST sljit_ins data_transfer_insts[64 + 8] = {
 /* Int. */
 
 /* s i n i s */ HI(36) /* stw */,
-/* s i n i l */ ARCH_32_64(HI(32) /* lwz */, HI(58) | ADDR_MODE2 | 0x2 /* lwa */),
+/* s i n i l */ ARCH_32_64(HI(32) /* lwz */, HI(58) | INT_ALIGNED | 0x2 /* lwa */),
 /* s i n x s */ HI(31) | LO(151) /* stwx */,
 /* s i n x l */ ARCH_32_64(HI(31) | LO(23) /* lwzx */, HI(31) | LO(341) /* lwax */),
 
 /* s i w i s */ HI(37) /* stwu */,
-/* s i w i l */ ARCH_32_64(HI(33) /* lwzu */, HI(58) | ADDR_MODE2 | UPDATE_REQ | 0x2 /* lwa */),
+/* s i w i l */ ARCH_32_64(HI(33) /* lwzu */, HI(58) | INT_ALIGNED | UPDATE_REQ | 0x2 /* lwa */),
 /* s i w x s */ HI(31) | LO(183) /* stwux */,
 /* s i w x l */ ARCH_32_64(HI(31) | LO(55) /* lwzux */, HI(31) | LO(373) /* lwaux */),
 
@@ -748,74 +835,48 @@ static SLJIT_CONST sljit_ins data_transfer_insts[64 + 8] = {
 static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si inp_flags, sljit_si reg, sljit_si arg, sljit_sw argw)
 {
 	sljit_ins inst;
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-	sljit_si tmp_reg;
-#endif
 
+	/* Should work when (arg & REG_MASK) == 0. */
+	SLJIT_COMPILE_ASSERT(A(0) == 0, a0_must_be_0);
 	SLJIT_ASSERT(arg & SLJIT_MEM);
-	if (!(arg & 0xf)) {
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-		if (argw <= SIMM_MAX && argw >= SIMM_MIN) {
-			if (inp_flags & ARG_TEST)
-				return 1;
-
-			inst = data_transfer_insts[(inp_flags & ~WRITE_BACK) & MEM_MASK];
-			SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-			push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | IMM(argw));
-			return -1;
-		}
-#else
-		inst = data_transfer_insts[(inp_flags & ~WRITE_BACK) & MEM_MASK];
-		if (argw <= SIMM_MAX && argw >= SIMM_MIN &&
-				(!(inst & ADDR_MODE2) || (argw & 0x3) == 0)) {
-			if (inp_flags & ARG_TEST)
-				return 1;
-
-			push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | IMM(argw));
-			return -1;
-		}
-#endif
-		return 0;
-	}
 
-	if (!(arg & 0xf0)) {
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-		if (argw <= SIMM_MAX && argw >= SIMM_MIN) {
-			if (inp_flags & ARG_TEST)
-				return 1;
-
-			inst = data_transfer_insts[inp_flags & MEM_MASK];
-			SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-			push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | IMM(argw));
-			return -1;
-		}
-#else
-		inst = data_transfer_insts[inp_flags & MEM_MASK];
-		if (argw <= SIMM_MAX && argw >= SIMM_MIN && (!(inst & ADDR_MODE2) || (argw & 0x3) == 0)) {
-			if (inp_flags & ARG_TEST)
-				return 1;
-
-			if ((inp_flags & WRITE_BACK) && (inst & UPDATE_REQ)) {
-				tmp_reg = (inp_flags & LOAD_DATA) ? (arg & 0xf) : TMP_REG3;
-				if (push_inst(compiler, ADDI | D(tmp_reg) | A(arg & 0xf) | IMM(argw)))
-					return -1;
-				arg = tmp_reg | SLJIT_MEM;
-				argw = 0;
-			}
-			push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | IMM(argw));
-			return -1;
-		}
-#endif
-	}
-	else if (!(argw & 0x3)) {
+	if (arg & OFFS_REG_MASK) {
+		if (argw & 0x3)
+			return 0;
 		if (inp_flags & ARG_TEST)
 			return 1;
+
 		inst = data_transfer_insts[(inp_flags | INDEXED) & MEM_MASK];
-		SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-		push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | B((arg >> 4) & 0xf));
+		SLJIT_ASSERT(!(inst & (INT_ALIGNED | UPDATE_REQ)));
+		FAIL_IF(push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & REG_MASK) | B(OFFS_REG(arg))));
 		return -1;
 	}
-	return 0;
+
+	if (SLJIT_UNLIKELY(!(arg & REG_MASK)))
+		inp_flags &= ~WRITE_BACK;
+
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	inst = data_transfer_insts[inp_flags & MEM_MASK];
+	SLJIT_ASSERT((arg & REG_MASK) || !(inst & UPDATE_REQ));
+
+	if (argw > SIMM_MAX || argw < SIMM_MIN || ((inst & INT_ALIGNED) && (argw & 0x3)) || (inst & UPDATE_REQ))
+		return 0;
+	if (inp_flags & ARG_TEST)
+		return 1;
+#endif
+
+#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+	if (argw > SIMM_MAX || argw < SIMM_MIN)
+		return 0;
+	if (inp_flags & ARG_TEST)
+		return 1;
+
+	inst = data_transfer_insts[inp_flags & MEM_MASK];
+	SLJIT_ASSERT(!(inst & (INT_ALIGNED | UPDATE_REQ)));
+#endif
+
+	FAIL_IF(push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & REG_MASK) | IMM(argw)));
+	return -1;
 }
 
 /* See getput_arg below.
@@ -823,35 +884,50 @@ static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si inp_fl
    uses word arguments without write back. */
 static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
 {
+	sljit_sw high_short, next_high_short;
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	sljit_sw diff;
+#endif
+
 	SLJIT_ASSERT((arg & SLJIT_MEM) && (next_arg & SLJIT_MEM));
 
-	if (!(arg & 0xf))
-		return (next_arg & SLJIT_MEM) && ((sljit_uw)argw - (sljit_uw)next_argw <= SIMM_MAX || (sljit_uw)next_argw - (sljit_uw)argw <= SIMM_MAX);
+	if (arg & OFFS_REG_MASK)
+		return ((arg & OFFS_REG_MASK) == (next_arg & OFFS_REG_MASK) && (argw & 0x3) == (next_argw & 0x3));
 
-	if (arg & 0xf0)
-		return ((arg & 0xf0) == (next_arg & 0xf0) && (argw & 0x3) == (next_argw & 0x3));
+	if (next_arg & OFFS_REG_MASK)
+		return 0;
 
-	if (argw <= SIMM_MAX && argw >= SIMM_MIN) {
-		if (arg == next_arg && (next_argw >= SIMM_MAX && next_argw <= SIMM_MIN))
+#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+	high_short = (argw + ((argw & 0x8000) << 1)) & ~0xffff;
+	next_high_short = (next_argw + ((next_argw & 0x8000) << 1)) & ~0xffff;
+	return high_short == next_high_short;
+#else
+	if (argw <= 0x7fffffffl && argw >= -0x80000000l) {
+		high_short = (argw + ((argw & 0x8000) << 1)) & ~0xffff;
+		next_high_short = (next_argw + ((next_argw & 0x8000) << 1)) & ~0xffff;
+		if (high_short == next_high_short)
 			return 1;
 	}
 
-	if (arg == next_arg && ((sljit_uw)argw - (sljit_uw)next_argw <= SIMM_MAX || (sljit_uw)next_argw - (sljit_uw)argw <= SIMM_MAX))
+	diff = argw - next_argw;
+	if (!(arg & REG_MASK))
+		return diff <= SIMM_MAX && diff >= SIMM_MIN;
+
+	if (arg == next_arg && diff <= SIMM_MAX && diff >= SIMM_MIN)
 		return 1;
 
 	return 0;
+#endif
 }
 
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 #define ADJUST_CACHED_IMM(imm) \
-	if ((inst & ADDR_MODE2) && (imm & 0x3)) { \
+	if ((inst & INT_ALIGNED) && (imm & 0x3)) { \
 		/* Adjust cached value. Fortunately this is really a rare case */ \
 		compiler->cache_argw += imm & 0x3; \
 		FAIL_IF(push_inst(compiler, ADDI | D(TMP_REG3) | A(TMP_REG3) | (imm & 0x3))); \
 		imm &= ~0x3; \
 	}
-#else
-#define ADJUST_CACHED_IMM(imm)
 #endif
 
 /* Emit the necessary instructions. See can_cache above. */
@@ -859,72 +935,125 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 {
 	sljit_si tmp_r;
 	sljit_ins inst;
+	sljit_sw high_short, next_high_short;
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	sljit_sw diff;
+#endif
 
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
 	tmp_r = ((inp_flags & LOAD_DATA) && ((inp_flags) & MEM_MASK) <= GPR_REG) ? reg : TMP_REG1;
 	/* Special case for "mov reg, [reg, ... ]". */
-	if ((arg & 0xf) == tmp_r)
+	if ((arg & REG_MASK) == tmp_r)
 		tmp_r = TMP_REG1;
 
-	if (!(arg & 0xf)) {
-		inst = data_transfer_insts[(inp_flags & ~WRITE_BACK) & MEM_MASK];
-		if ((compiler->cache_arg & SLJIT_IMM) && (((sljit_uw)argw - (sljit_uw)compiler->cache_argw) <= SIMM_MAX || ((sljit_uw)compiler->cache_argw - (sljit_uw)argw) <= SIMM_MAX)) {
-			argw = argw - compiler->cache_argw;
-			ADJUST_CACHED_IMM(argw);
-			SLJIT_ASSERT(!(inst & UPDATE_REQ));
-			return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(TMP_REG3) | IMM(argw));
-		}
-
-		if ((next_arg & SLJIT_MEM) && (argw - next_argw <= SIMM_MAX || next_argw - argw <= SIMM_MAX)) {
-			SLJIT_ASSERT(inp_flags & LOAD_DATA);
-
-			compiler->cache_arg = SLJIT_IMM;
-			compiler->cache_argw = argw;
-			tmp_r = TMP_REG3;
-		}
-
-		FAIL_IF(load_immediate(compiler, tmp_r, argw));
-		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(tmp_r));
-	}
-
-	if (SLJIT_UNLIKELY(arg & 0xf0)) {
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
 		argw &= 0x3;
 		/* Otherwise getput_arg_fast would capture it. */
 		SLJIT_ASSERT(argw);
 
-		if ((SLJIT_MEM | (arg & 0xf0)) == compiler->cache_arg && argw == compiler->cache_argw)
+		if ((SLJIT_MEM | (arg & OFFS_REG_MASK)) == compiler->cache_arg && argw == compiler->cache_argw)
 			tmp_r = TMP_REG3;
 		else {
-			if ((arg & 0xf0) == (next_arg & 0xf0) && argw == (next_argw & 0x3)) {
-				compiler->cache_arg = SLJIT_MEM | (arg & 0xf0);
+			if ((arg & OFFS_REG_MASK) == (next_arg & OFFS_REG_MASK) && argw == (next_argw & 0x3)) {
+				compiler->cache_arg = SLJIT_MEM | (arg & OFFS_REG_MASK);
 				compiler->cache_argw = argw;
 				tmp_r = TMP_REG3;
 			}
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-			FAIL_IF(push_inst(compiler, RLWINM | S((arg >> 4) & 0xf) | A(tmp_r) | (argw << 11) | ((31 - argw) << 1)));
+			FAIL_IF(push_inst(compiler, RLWINM | S(OFFS_REG(arg)) | A(tmp_r) | (argw << 11) | ((31 - argw) << 1)));
 #else
-			FAIL_IF(push_inst(compiler, RLDI(tmp_r, (arg >> 4) & 0xf, argw, 63 - argw, 1)));
+			FAIL_IF(push_inst(compiler, RLDI(tmp_r, OFFS_REG(arg), argw, 63 - argw, 1)));
 #endif
 		}
 		inst = data_transfer_insts[(inp_flags | INDEXED) & MEM_MASK];
-		SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | B(tmp_r));
+		SLJIT_ASSERT(!(inst & (INT_ALIGNED | UPDATE_REQ)));
+		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & REG_MASK) | B(tmp_r));
 	}
 
+	if (SLJIT_UNLIKELY(!(arg & REG_MASK)))
+		inp_flags &= ~WRITE_BACK;
+
 	inst = data_transfer_insts[inp_flags & MEM_MASK];
+	SLJIT_ASSERT((arg & REG_MASK) || !(inst & UPDATE_REQ));
+
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	if (argw <= 0x7fff7fffl && argw >= -0x80000000l
+			&& (!(inst & INT_ALIGNED) || !(argw & 0x3)) && !(inst & UPDATE_REQ)) {
+#endif
+
+		arg &= REG_MASK;
+		high_short = (sljit_si)(argw + ((argw & 0x8000) << 1)) & ~0xffff;
+		/* The getput_arg_fast should handle this otherwise. */
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+		SLJIT_ASSERT(high_short && high_short <= 0x7fffffffl && high_short >= -0x80000000l);
+#else
+		SLJIT_ASSERT(high_short && !(inst & (INT_ALIGNED | UPDATE_REQ)));
+#endif
 
-	if (compiler->cache_arg == arg && ((sljit_uw)argw - (sljit_uw)compiler->cache_argw <= SIMM_MAX || (sljit_uw)compiler->cache_argw - (sljit_uw)argw <= SIMM_MAX)) {
-		SLJIT_ASSERT(!(inp_flags & WRITE_BACK));
-		argw = argw - compiler->cache_argw;
-		ADJUST_CACHED_IMM(argw);
-		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(TMP_REG3) | IMM(argw));
+		if (inp_flags & WRITE_BACK) {
+			if (arg == reg) {
+				FAIL_IF(push_inst(compiler, OR | S(reg) | A(tmp_r) | B(reg)));
+				reg = tmp_r;
+			}
+			tmp_r = arg;
+			FAIL_IF(push_inst(compiler, ADDIS | D(arg) | A(arg) | IMM(high_short >> 16)));
+		}
+		else if (compiler->cache_arg != arg || high_short != compiler->cache_argw) {
+			if ((next_arg & SLJIT_MEM) && !(next_arg & OFFS_REG_MASK)) {
+				next_high_short = (sljit_si)(next_argw + ((next_argw & 0x8000) << 1)) & ~0xffff;
+				if (high_short == next_high_short) {
+					compiler->cache_arg = SLJIT_IMM | arg;
+					compiler->cache_argw = next_high_short;
+					tmp_r = TMP_REG3;
+				}
+			}
+			FAIL_IF(push_inst(compiler, ADDIS | D(tmp_r) | A(arg & REG_MASK) | IMM(high_short >> 16)));
+		}
+		else
+			tmp_r = TMP_REG3;
+
+		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(tmp_r) | IMM(argw));
+
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	}
+
+	/* Everything else is PPC-64 only. */
+	if (SLJIT_UNLIKELY(!(arg & REG_MASK))) {
+		diff = argw - compiler->cache_argw;
+		if ((compiler->cache_arg & SLJIT_IMM) && diff <= SIMM_MAX && diff >= SIMM_MIN) {
+			ADJUST_CACHED_IMM(diff);
+			return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(TMP_REG3) | IMM(diff));
+		}
+
+		diff = argw - next_argw;
+		if ((next_arg & SLJIT_MEM) && diff <= SIMM_MAX && diff >= SIMM_MIN) {
+			SLJIT_ASSERT(inp_flags & LOAD_DATA);
+
+			compiler->cache_arg = SLJIT_IMM;
+			compiler->cache_argw = argw;
+			tmp_r = TMP_REG3;
+		}
+
+		FAIL_IF(load_immediate(compiler, tmp_r, argw));
+		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(tmp_r));
+	}
+
+	diff = argw - compiler->cache_argw;
+	if (compiler->cache_arg == arg && diff <= SIMM_MAX && diff >= SIMM_MIN) {
+		SLJIT_ASSERT(!(inp_flags & WRITE_BACK) && !(inst & UPDATE_REQ));
+		ADJUST_CACHED_IMM(diff);
+		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(TMP_REG3) | IMM(diff));
 	}
 
-	if ((compiler->cache_arg & SLJIT_IMM) && compiler->cache_argw == argw) {
+	if ((compiler->cache_arg & SLJIT_IMM) && diff <= SIMM_MAX && diff >= SIMM_MIN) {
 		inst = data_transfer_insts[(inp_flags | INDEXED) & MEM_MASK];
-		SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | B(TMP_REG3));
+		SLJIT_ASSERT(!(inst & (INT_ALIGNED | UPDATE_REQ)));
+		if (compiler->cache_argw != argw) {
+			FAIL_IF(push_inst(compiler, ADDI | D(TMP_REG3) | A(TMP_REG3) | IMM(diff)));
+			compiler->cache_argw = argw;
+		}
+		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & REG_MASK) | B(TMP_REG3));
 	}
 
 	if (argw == next_argw && (next_arg & SLJIT_MEM)) {
@@ -935,14 +1064,15 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 		compiler->cache_argw = argw;
 
 		inst = data_transfer_insts[(inp_flags | INDEXED) & MEM_MASK];
-		SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | B(TMP_REG3));
+		SLJIT_ASSERT(!(inst & (INT_ALIGNED | UPDATE_REQ)));
+		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & REG_MASK) | B(TMP_REG3));
 	}
 
-	if (arg == next_arg && !(inp_flags & WRITE_BACK) && ((sljit_uw)argw - (sljit_uw)next_argw <= SIMM_MAX || (sljit_uw)next_argw - (sljit_uw)argw <= SIMM_MAX)) {
+	diff = argw - next_argw;
+	if (arg == next_arg && !(inp_flags & WRITE_BACK) && diff <= SIMM_MAX && diff >= SIMM_MIN) {
 		SLJIT_ASSERT(inp_flags & LOAD_DATA);
 		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
-		FAIL_IF(push_inst(compiler, ADD | D(TMP_REG3) | A(TMP_REG3) | B(arg & 0xf)));
+		FAIL_IF(push_inst(compiler, ADD | D(TMP_REG3) | A(TMP_REG3) | B(arg & REG_MASK)));
 
 		compiler->cache_arg = arg;
 		compiler->cache_argw = argw;
@@ -950,11 +1080,22 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si inp_flags,
 		return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(TMP_REG3));
 	}
 
+	if ((next_arg & SLJIT_MEM) && !(next_arg & OFFS_REG_MASK) && diff <= SIMM_MAX && diff >= SIMM_MIN) {
+		SLJIT_ASSERT(inp_flags & LOAD_DATA);
+		FAIL_IF(load_immediate(compiler, TMP_REG3, argw));
+
+		compiler->cache_arg = SLJIT_IMM;
+		compiler->cache_argw = argw;
+		tmp_r = TMP_REG3;
+	}
+	else
+		FAIL_IF(load_immediate(compiler, tmp_r, argw));
+
 	/* Get the indexed version instead of the normal one. */
 	inst = data_transfer_insts[(inp_flags | INDEXED) & MEM_MASK];
-	SLJIT_ASSERT(!(inst & (ADDR_MODE2 | UPDATE_REQ)));
-	FAIL_IF(load_immediate(compiler, tmp_r, argw));
-	return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & 0xf) | B(tmp_r));
+	SLJIT_ASSERT(!(inst & (INT_ALIGNED | UPDATE_REQ)));
+	return push_inst(compiler, INST_CODE_AND_DST(inst, inp_flags, reg) | A(arg & REG_MASK) | B(tmp_r));
+#endif
 }
 
 static SLJIT_INLINE sljit_si emit_op_mem2(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg1, sljit_sw arg1w, sljit_si arg2, sljit_sw arg2w)
@@ -990,7 +1131,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 			return SLJIT_SUCCESS;
 		dst_r = TMP_REG2;
 	}
-	else if (dst <= ZERO_REG) {
+	else if (FAST_IS_REG(dst)) {
 		dst_r = dst;
 		flags |= REG_DEST;
 		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -1009,7 +1150,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 	}
 
 	/* Source 1. */
-	if (src1 <= ZERO_REG) {
+	if (FAST_IS_REG(src1)) {
 		src1_r = src1;
 		flags |= REG1_SOURCE;
 	}
@@ -1025,7 +1166,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 		src1_r = 0;
 
 	/* Source 2. */
-	if (src2 <= ZERO_REG) {
+	if (FAST_IS_REG(src2)) {
 		src2_r = src2;
 		flags |= REG2_SOURCE;
 		if (!(flags & REG_DEST) && op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -1095,38 +1236,42 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si i
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
 {
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	sljit_si int_op = op & SLJIT_INT_OP;
+#endif
+
 	CHECK_ERROR();
 	check_sljit_emit_op0(compiler, op);
 
-	switch (GET_OPCODE(op)) {
+	op = GET_OPCODE(op);
+	switch (op) {
 	case SLJIT_BREAKPOINT:
 	case SLJIT_NOP:
 		return push_inst(compiler, NOP);
-		break;
 	case SLJIT_UMUL:
 	case SLJIT_SMUL:
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG1)));
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 		FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
-		return push_inst(compiler, (GET_OPCODE(op) == SLJIT_UMUL ? MULHDU : MULHD) | D(SLJIT_SCRATCH_REG2) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2));
+		return push_inst(compiler, (op == SLJIT_UMUL ? MULHDU : MULHD) | D(SLJIT_SCRATCH_REG2) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2));
 #else
 		FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
-		return push_inst(compiler, (GET_OPCODE(op) == SLJIT_UMUL ? MULHWU : MULHW) | D(SLJIT_SCRATCH_REG2) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2));
+		return push_inst(compiler, (op == SLJIT_UMUL ? MULHWU : MULHW) | D(SLJIT_SCRATCH_REG2) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2));
 #endif
 	case SLJIT_UDIV:
 	case SLJIT_SDIV:
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG1)));
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-		if (op & SLJIT_INT_OP) {
-			FAIL_IF(push_inst(compiler, (GET_OPCODE(op) == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
+		if (int_op) {
+			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
 			FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG1) | B(SLJIT_SCRATCH_REG2)));
-			return push_inst(compiler, SUBF | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG2) | B(TMP_REG1));
+		} else {
+			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVDU : DIVD) | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
+			FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG1) | B(SLJIT_SCRATCH_REG2)));
 		}
-		FAIL_IF(push_inst(compiler, (GET_OPCODE(op) == SLJIT_UDIV ? DIVDU : DIVD) | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
-		FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG1) | B(SLJIT_SCRATCH_REG2)));
 		return push_inst(compiler, SUBF | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG2) | B(TMP_REG1));
 #else
-		FAIL_IF(push_inst(compiler, (GET_OPCODE(op) == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_SCRATCH_REG1) | A(TMP_REG1) | B(SLJIT_SCRATCH_REG2)));
 		FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG1) | B(SLJIT_SCRATCH_REG2)));
 		return push_inst(compiler, SUBF | D(SLJIT_SCRATCH_REG2) | A(SLJIT_SCRATCH_REG2) | B(TMP_REG1));
 #endif
@@ -1152,14 +1297,14 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 
 	op = GET_OPCODE(op);
 	if ((src & SLJIT_IMM) && srcw == 0)
-		src = ZERO_REG;
+		src = TMP_ZERO;
 
 	if (op_flags & SLJIT_SET_O)
-		FAIL_IF(push_inst(compiler, MTXER | S(ZERO_REG)));
+		FAIL_IF(push_inst(compiler, MTXER | S(TMP_ZERO)));
 
 	if (op_flags & SLJIT_INT_OP) {
-		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_P) {
-			if (src <= ZERO_REG && src == dst) {
+		if (op < SLJIT_NOT) {
+			if (FAST_IS_REG(src) && src == dst) {
 				if (!TYPE_CAST_NEEDED(op))
 					return SLJIT_SUCCESS;
 			}
@@ -1268,7 +1413,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 #define TEST_SH_IMM(src, srcw) \
-	(((src) & SLJIT_IMM) && !((srcw) & 0xffff) && (srcw) <= SLJIT_W(0x7fffffff) && (srcw) >= SLJIT_W(-0x80000000))
+	(((src) & SLJIT_IMM) && !((srcw) & 0xffff) && (srcw) <= 0x7fffffffl && (srcw) >= -0x80000000l)
 #else
 #define TEST_SH_IMM(src, srcw) \
 	(((src) & SLJIT_IMM) && !((srcw) & 0xffff))
@@ -1279,7 +1424,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 #define TEST_ADD_IMM(src, srcw) \
-	(((src) & SLJIT_IMM) && (srcw) <= SLJIT_W(0x7fff7fff) && (srcw) >= SLJIT_W(-0x80000000))
+	(((src) & SLJIT_IMM) && (srcw) <= 0x7fff7fffl && (srcw) >= -0x80000000l)
 #else
 #define TEST_ADD_IMM(src, srcw) \
 	((src) & SLJIT_IMM)
@@ -1307,9 +1452,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 	ADJUST_LOCAL_OFFSET(src2, src2w);
 
 	if ((src1 & SLJIT_IMM) && src1w == 0)
-		src1 = ZERO_REG;
+		src1 = TMP_ZERO;
 	if ((src2 & SLJIT_IMM) && src2w == 0)
-		src2 = ZERO_REG;
+		src2 = TMP_ZERO;
 
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 	if (op & SLJIT_INT_OP) {
@@ -1324,7 +1469,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 	}
 #endif
 	if (op & SLJIT_SET_O)
-		FAIL_IF(push_inst(compiler, MTXER | S(ZERO_REG)));
+		FAIL_IF(push_inst(compiler, MTXER | S(TMP_ZERO)));
 	if (src2 == TMP_REG2)
 		flags |= ALT_KEEP_CACHE;
 
@@ -1392,7 +1537,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 				return emit_op(compiler, SLJIT_ADD, flags | ALT_FORM4, dst, dstw, src1, src1w, TMP_REG2, 0);
 			}
 		}
-		if (dst == SLJIT_UNUSED && (op & (SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U)) && !(op & (SLJIT_SET_O | SLJIT_SET_C))) {
+		if (dst == SLJIT_UNUSED && (op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S)) && !(op & (SLJIT_SET_O | SLJIT_SET_C))) {
 			if (!(op & SLJIT_SET_U)) {
 				/* We know ALT_SIGN_EXT is set if it is an SLJIT_INT_OP on 64 bit systems. */
 				if (TEST_SL_IMM(src2, src2w)) {
@@ -1418,7 +1563,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler
 			}
 			return emit_op(compiler, SLJIT_SUB, flags | ((op & SLJIT_SET_U) ? ALT_FORM4 : 0) | ((op & (SLJIT_SET_E | SLJIT_SET_S)) ? ALT_FORM5 : 0), dst, dstw, src1, src1w, src2, src2w);
 		}
-		if (!(op & (SLJIT_SET_E | SLJIT_SET_S | SLJIT_SET_U | SLJIT_SET_O))) {
+		if (!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O))) {
 			if (TEST_SL_IMM(src2, -src2w)) {
 				compiler->imm = (-src2w) & 0xffff;
 				return emit_op(compiler, SLJIT_ADD, flags | ALT_FORM3, dst, dstw, src1, src1w, TMP_REG2, 0);
@@ -1529,8 +1674,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *co
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
 {
-	/* Always available. */
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
+#else
+	/* Available by default. */
 	return 1;
+#endif
 }
 
 #define FLOAT_DATA(op) (DOUBLE_DATA | ((op & SLJIT_SINGLE_OP) >> 6))
@@ -1550,12 +1699,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 	compiler->cache_argw = 0;
 
 	if (GET_OPCODE(op) == SLJIT_CMPD) {
-		if (dst > SLJIT_FLOAT_REG6) {
+		if (dst & SLJIT_MEM) {
 			FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG1, dst, dstw, src, srcw));
 			dst = TMP_FREG1;
 		}
 
-		if (src > SLJIT_FLOAT_REG6) {
+		if (src & SLJIT_MEM) {
 			FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG2, src, srcw, 0, 0));
 			src = TMP_FREG2;
 		}
@@ -1563,9 +1712,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 		return push_inst(compiler, FCMPU | CRD(4) | FA(dst) | FB(src));
 	}
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : dst;
+	dst_fr = FAST_IS_REG(dst) ? dst : TMP_FREG1;
 
-	if (src > SLJIT_FLOAT_REG6) {
+	if (src & SLJIT_MEM) {
 		FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, dst_fr, src, srcw, dst, dstw));
 		src = dst_fr;
 	}
@@ -1605,9 +1754,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG2 : dst;
+	dst_fr = FAST_IS_REG(dst) ? dst : TMP_FREG2;
 
-	if (src1 > SLJIT_FLOAT_REG6) {
+	if (src1 & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG1, src1, src1w)) {
 			FAIL_IF(compiler->error);
 			src1 = TMP_FREG1;
@@ -1615,7 +1764,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 			flags |= ALT_FORM1;
 	}
 
-	if (src2 > SLJIT_FLOAT_REG6) {
+	if (src2 & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG2, src2, src2w)) {
 			FAIL_IF(compiler->error);
 			src2 = TMP_FREG2;
@@ -1684,7 +1833,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
 
-	if (dst <= ZERO_REG)
+	if (FAST_IS_REG(dst))
 		return push_inst(compiler, MFLR | D(dst));
 
 	/* Memory. */
@@ -1698,7 +1847,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 	check_sljit_emit_fast_return(compiler, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= ZERO_REG)
+	if (FAST_IS_REG(src))
 		FAIL_IF(push_inst(compiler, MTLR | S(src)));
 	else {
 		if (src & SLJIT_MEM)
@@ -1811,11 +1960,15 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compile
 	type &= 0xff;
 
 	/* In PPC, we don't need to touch the arguments. */
-	if (type >= SLJIT_JUMP)
-		jump->flags |= UNCOND_B;
+	if (type < SLJIT_JUMP)
+		jump->flags |= IS_COND;
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL)
+	if (type >= SLJIT_CALL0)
+		jump->flags |= IS_CALL;
+#endif
 
-	PTR_FAIL_IF(emit_const(compiler, TMP_REG1, 0));
-	PTR_FAIL_IF(push_inst(compiler, MTCTR | S(TMP_REG1)));
+	PTR_FAIL_IF(emit_const(compiler, TMP_CALL_REG, 0));
+	PTR_FAIL_IF(push_inst(compiler, MTCTR | S(TMP_CALL_REG)));
 	jump->addr = compiler->size;
 	PTR_FAIL_IF(push_inst(compiler, BCCTR | bo_bi_flags | (type >= SLJIT_FAST_CALL ? 1 : 0)));
 	return jump;
@@ -1830,20 +1983,32 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 	check_sljit_emit_ijump(compiler, type, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= ZERO_REG)
+	if (FAST_IS_REG(src)) {
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL)
+		if (type >= SLJIT_CALL0) {
+			FAIL_IF(push_inst(compiler, OR | S(src) | A(TMP_CALL_REG) | B(src)));
+			src_r = TMP_CALL_REG;
+		}
+		else
+			src_r = src;
+#else
 		src_r = src;
-	else if (src & SLJIT_IMM) {
+#endif
+	} else if (src & SLJIT_IMM) {
 		jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
 		FAIL_IF(!jump);
-		set_jump(jump, compiler, JUMP_ADDR | UNCOND_B);
+		set_jump(jump, compiler, JUMP_ADDR);
 		jump->u.target = srcw;
-
-		FAIL_IF(emit_const(compiler, TMP_REG2, 0));
-		src_r = TMP_REG2;
+#if (defined SLJIT_PASS_ENTRY_ADDR_TO_CALL && SLJIT_PASS_ENTRY_ADDR_TO_CALL)
+		if (type >= SLJIT_CALL0)
+			jump->flags |= IS_CALL;
+#endif
+		FAIL_IF(emit_const(compiler, TMP_CALL_REG, 0));
+		src_r = TMP_CALL_REG;
 	}
 	else {
-		FAIL_IF(emit_op(compiler, SLJIT_MOV, WORD_DATA, TMP_REG2, 0, TMP_REG1, 0, src, srcw));
-		src_r = TMP_REG2;
+		FAIL_IF(emit_op(compiler, SLJIT_MOV, WORD_DATA, TMP_CALL_REG, 0, TMP_REG1, 0, src, srcw));
+		src_r = TMP_CALL_REG;
 	}
 
 	FAIL_IF(push_inst(compiler, MTCTR | S(src_r)));
@@ -1867,6 +2032,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 {
 	sljit_si reg, input_flags;
 	sljit_si flags = GET_ALL_FLAGS(op);
+	sljit_sw original_dstw = dstw;
 
 	CHECK_ERROR();
 	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
@@ -1876,7 +2042,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 		return SLJIT_SUCCESS;
 
 	op = GET_OPCODE(op);
-	reg = (op < SLJIT_ADD && dst <= ZERO_REG) ? dst : TMP_REG2;
+	reg = (op < SLJIT_ADD && FAST_IS_REG(dst)) ? dst : TMP_REG2;
 
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
@@ -1988,13 +2154,15 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 		op = SLJIT_MOV;
 		input_flags = WORD_DATA;
 #endif
-		return (reg == TMP_REG2) ? emit_op(compiler, op, input_flags, dst, dstw, TMP_REG1, 0, TMP_REG2, 0) : SLJIT_SUCCESS;
+		if (reg != TMP_REG2)
+			return SLJIT_SUCCESS;
+		return emit_op(compiler, op, input_flags, dst, dstw, TMP_REG1, 0, TMP_REG2, 0);
 	}
 
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	compiler->skip_checks = 1;
 #endif
-	return sljit_emit_op2(compiler, op | flags, dst, dstw, src, srcw, TMP_REG2, 0);
+	return sljit_emit_op2(compiler, op | flags, dst, original_dstw, src, srcw, TMP_REG2, 0);
 }
 
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
@@ -2010,7 +2178,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 	PTR_FAIL_IF(!const_);
 	set_const(const_, compiler);
 
-	reg = (dst <= ZERO_REG) ? dst : TMP_REG2;
+	reg = SLOW_IS_REG(dst) ? dst : TMP_REG2;
 
 	PTR_FAIL_IF(emit_const(compiler, reg, init_value));
 
diff --git a/src/3rdparty/pcre/sljit/sljitNativeSPARC_common.c b/src/3rdparty/pcre/sljit/sljitNativeSPARC_common.c
index e5571ee6dd..d6a1e12bfe 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeSPARC_common.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeSPARC_common.c
@@ -87,7 +87,7 @@ static void sparc_cache_flush(sljit_ins *from, sljit_ins *to)
 #define TMP_REG2	(SLJIT_NO_REGISTERS + 2)
 #define TMP_REG3	(SLJIT_NO_REGISTERS + 3)
 #define TMP_REG4	(SLJIT_NO_REGISTERS + 4)
-#define LINK_REG	(SLJIT_NO_REGISTERS + 5)
+#define TMP_LINK	(SLJIT_NO_REGISTERS + 5)
 
 #define TMP_FREG1	(0)
 #define TMP_FREG2	((SLJIT_FLOAT_REG6 + 1) << 1)
@@ -190,7 +190,7 @@ static sljit_si push_inst(struct sljit_compiler *compiler, sljit_ins ins, sljit_
 	return SLJIT_SUCCESS;
 }
 
-static SLJIT_INLINE sljit_ins* optimize_jump(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
+static SLJIT_INLINE sljit_ins* detect_jump_type(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
 {
 	sljit_sw diff;
 	sljit_uw target_addr;
@@ -311,7 +311,7 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 #else
 				jump->addr = (sljit_uw)(code_ptr - 6);
 #endif
-				code_ptr = optimize_jump(jump, code_ptr, code);
+				code_ptr = detect_jump_type(jump, code_ptr, code);
 				jump = jump->next;
 			}
 			if (const_ && const_->addr == word_count) {
@@ -465,7 +465,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compi
 	CHECK_ERROR();
 	check_sljit_emit_return(compiler, op, src, srcw);
 
-	if (op != SLJIT_MOV || !(src <= TMP_REG3)) {
+	if (op != SLJIT_MOV || !FAST_IS_REG(src)) {
 		FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
 		src = SLJIT_SCRATCH_REG1;
 	}
@@ -516,15 +516,15 @@ static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si flags,
 {
 	SLJIT_ASSERT(arg & SLJIT_MEM);
 
-	if (!(flags & WRITE_BACK) || !(arg & 0xf)) {
-		if ((!(arg & 0xf0) && argw <= SIMM_MAX && argw >= SIMM_MIN)
-				|| ((arg & 0xf0) && (argw & 0x3) == 0)) {
+	if (!(flags & WRITE_BACK) || !(arg & REG_MASK)) {
+		if ((!(arg & OFFS_REG_MASK) && argw <= SIMM_MAX && argw >= SIMM_MIN)
+				|| ((arg & OFFS_REG_MASK) && (argw & 0x3) == 0)) {
 			/* Works for both absoulte and relative addresses (immediate case). */
 			if (SLJIT_UNLIKELY(flags & ARG_TEST))
 				return 1;
 			FAIL_IF(push_inst(compiler, data_transfer_insts[flags & MEM_MASK]
 				| ((flags & MEM_MASK) <= GPR_REG ? D(reg) : DA(reg))
-				| S1(arg & 0xf) | ((arg & 0xf0) ? S2((arg >> 4) & 0xf) : IMM(argw)),
+				| S1(arg & REG_MASK) | ((arg & OFFS_REG_MASK) ? S2(OFFS_REG(arg)) : IMM(argw)),
 				((flags & MEM_MASK) <= GPR_REG && (flags & LOAD_DATA)) ? DR(reg) : MOVABLE_INS));
 			return -1;
 		}
@@ -540,11 +540,11 @@ static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_
 	SLJIT_ASSERT((arg & SLJIT_MEM) && (next_arg & SLJIT_MEM));
 
 	/* Simple operation except for updates. */
-	if (arg & 0xf0) {
+	if (arg & OFFS_REG_MASK) {
 		argw &= 0x3;
 		SLJIT_ASSERT(argw);
 		next_argw &= 0x3;
-		if ((arg & 0xf0) == (next_arg & 0xf0) && argw == next_argw)
+		if ((arg & OFFS_REG_MASK) == (next_arg & OFFS_REG_MASK) && argw == next_argw)
 			return 1;
 		return 0;
 	}
@@ -566,25 +566,25 @@ static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, slji
 		next_argw = 0;
 	}
 
-	base = arg & 0xf;
-	if (SLJIT_UNLIKELY(arg & 0xf0)) {
+	base = arg & REG_MASK;
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
 		argw &= 0x3;
 		SLJIT_ASSERT(argw != 0);
 
 		/* Using the cache. */
-		if (((SLJIT_MEM | (arg & 0xf0)) == compiler->cache_arg) && (argw == compiler->cache_argw))
+		if (((SLJIT_MEM | (arg & OFFS_REG_MASK)) == compiler->cache_arg) && (argw == compiler->cache_argw))
 			arg2 = TMP_REG3;
 		else {
-			if ((arg & 0xf0) == (next_arg & 0xf0) && argw == (next_argw & 0x3)) {
-				compiler->cache_arg = SLJIT_MEM | (arg & 0xf0);
+			if ((arg & OFFS_REG_MASK) == (next_arg & OFFS_REG_MASK) && argw == (next_argw & 0x3)) {
+				compiler->cache_arg = SLJIT_MEM | (arg & OFFS_REG_MASK);
 				compiler->cache_argw = argw;
 				arg2 = TMP_REG3;
 			}
-			else if ((flags & LOAD_DATA) && ((flags & MEM_MASK) <= GPR_REG) && reg != base && (reg << 4) != (arg & 0xf0))
+			else if ((flags & LOAD_DATA) && ((flags & MEM_MASK) <= GPR_REG) && reg != base && reg != OFFS_REG(arg))
 				arg2 = reg;
 			else /* It must be a mov operation, so tmp1 must be free to use. */
 				arg2 = TMP_REG1;
-			FAIL_IF(push_inst(compiler, SLL_W | D(arg2) | S1((arg >> 4) & 0xf) | IMM_ARG | argw, DR(arg2)));
+			FAIL_IF(push_inst(compiler, SLL_W | D(arg2) | S1(OFFS_REG(arg)) | IMM_ARG | argw, DR(arg2)));
 		}
 	}
 	else {
@@ -658,7 +658,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI && !(src2 & SLJIT_MEM))
 			return SLJIT_SUCCESS;
 	}
-	else if (dst <= TMP_REG3) {
+	else if (FAST_IS_REG(dst)) {
 		dst_r = dst;
 		flags |= REG_DEST;
 		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -689,7 +689,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 	}
 
 	/* Source 1. */
-	if (src1 <= TMP_REG3)
+	if (FAST_IS_REG(src1))
 		src1_r = src1;
 	else if (src1 & SLJIT_IMM) {
 		if (src1w) {
@@ -708,7 +708,7 @@ static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si f
 	}
 
 	/* Source 2. */
-	if (src2 <= TMP_REG3) {
+	if (FAST_IS_REG(src2)) {
 		src2_r = src2;
 		flags |= REG2_SOURCE;
 		if (!(flags & REG_DEST) && op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
@@ -943,7 +943,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *co
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
 {
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
+#else
+	/* Available by default. */
 	return 1;
+#endif
 }
 
 #define FLOAT_DATA(op) (DOUBLE_DATA | ((op & SLJIT_SINGLE_OP) >> 7))
@@ -963,14 +968,14 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 	compiler->cache_argw = 0;
 
 	if (GET_OPCODE(op) == SLJIT_CMPD) {
-		if (dst > SLJIT_FLOAT_REG6) {
+		if (dst & SLJIT_MEM) {
 			FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG1, dst, dstw, src, srcw));
 			dst = TMP_FREG1;
 		}
 		else
 			dst <<= 1;
 
-		if (src > SLJIT_FLOAT_REG6) {
+		if (src & SLJIT_MEM) {
 			FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG2, src, srcw, 0, 0));
 			src = TMP_FREG2;
 		}
@@ -980,9 +985,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 		return push_inst(compiler, SELECT_FOP(op, FCMPS, FCMPD) | S1A(dst) | S2A(src), FCC_IS_SET | MOVABLE_INS);
 	}
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG1 : (dst << 1);
+	dst_fr = FAST_IS_REG(dst) ? (dst << 1) : TMP_FREG1;
 
-	if (src > SLJIT_FLOAT_REG6) {
+	if (src & SLJIT_MEM) {
 		FAIL_IF(emit_op_mem2(compiler, FLOAT_DATA(op) | LOAD_DATA, dst_fr, src, srcw, dst, dstw));
 		src = dst_fr;
 	}
@@ -1031,9 +1036,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
 
-	dst_fr = (dst > SLJIT_FLOAT_REG6) ? TMP_FREG2 : (dst << 1);
+	dst_fr = FAST_IS_REG(dst) ? (dst << 1) : TMP_FREG2;
 
-	if (src1 > SLJIT_FLOAT_REG6) {
+	if (src1 & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG1, src1, src1w)) {
 			FAIL_IF(compiler->error);
 			src1 = TMP_FREG1;
@@ -1043,7 +1048,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	else
 		src1 <<= 1;
 
-	if (src2 > SLJIT_FLOAT_REG6) {
+	if (src2 & SLJIT_MEM) {
 		if (getput_arg_fast(compiler, FLOAT_DATA(op) | LOAD_DATA, TMP_FREG2, src2, src2w)) {
 			FAIL_IF(compiler->error);
 			src2 = TMP_FREG2;
@@ -1114,11 +1119,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
 
-	if (dst <= TMP_REG3)
-		return push_inst(compiler, OR | D(dst) | S1(0) | S2(LINK_REG), DR(dst));
+	if (FAST_IS_REG(dst))
+		return push_inst(compiler, OR | D(dst) | S1(0) | S2(TMP_LINK), DR(dst));
 
 	/* Memory. */
-	return emit_op_mem(compiler, WORD_DATA, LINK_REG, dst, dstw);
+	return emit_op_mem(compiler, WORD_DATA, TMP_LINK, dst, dstw);
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
@@ -1127,14 +1132,14 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 	check_sljit_emit_fast_return(compiler, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= TMP_REG3)
-		FAIL_IF(push_inst(compiler, OR | D(LINK_REG) | S1(0) | S2(src), DR(LINK_REG)));
+	if (FAST_IS_REG(src))
+		FAIL_IF(push_inst(compiler, OR | D(TMP_LINK) | S1(0) | S2(src), DR(TMP_LINK)));
 	else if (src & SLJIT_MEM)
-		FAIL_IF(emit_op_mem(compiler, WORD_DATA | LOAD_DATA, LINK_REG, src, srcw));
+		FAIL_IF(emit_op_mem(compiler, WORD_DATA | LOAD_DATA, TMP_LINK, src, srcw));
 	else if (src & SLJIT_IMM)
-		FAIL_IF(load_immediate(compiler, LINK_REG, srcw));
+		FAIL_IF(load_immediate(compiler, TMP_LINK, srcw));
 
-	FAIL_IF(push_inst(compiler, JMPL | D(0) | S1(LINK_REG) | IMM(8), UNMOVABLE_INS));
+	FAIL_IF(push_inst(compiler, JMPL | D(0) | S1(TMP_LINK) | IMM(8), UNMOVABLE_INS));
 	return push_inst(compiler, NOP, UNMOVABLE_INS);
 }
 
@@ -1269,7 +1274,7 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compile
 	}
 
 	PTR_FAIL_IF(emit_const(compiler, TMP_REG2, 0));
-	PTR_FAIL_IF(push_inst(compiler, JMPL | D(type >= SLJIT_FAST_CALL ? LINK_REG : 0) | S1(TMP_REG2) | IMM(0), UNMOVABLE_INS));
+	PTR_FAIL_IF(push_inst(compiler, JMPL | D(type >= SLJIT_FAST_CALL ? TMP_LINK : 0) | S1(TMP_REG2) | IMM(0), UNMOVABLE_INS));
 	jump->addr = compiler->size;
 	PTR_FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
 
@@ -1285,7 +1290,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 	check_sljit_emit_ijump(compiler, type, src, srcw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
-	if (src <= TMP_REG3)
+	if (FAST_IS_REG(src))
 		src_r = src;
 	else if (src & SLJIT_IMM) {
 		jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
@@ -1305,7 +1310,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 		src_r = TMP_REG2;
 	}
 
-	FAIL_IF(push_inst(compiler, JMPL | D(type >= SLJIT_FAST_CALL ? LINK_REG : 0) | S1(src_r) | IMM(0), UNMOVABLE_INS));
+	FAIL_IF(push_inst(compiler, JMPL | D(type >= SLJIT_FAST_CALL ? TMP_LINK : 0) | S1(src_r) | IMM(0), UNMOVABLE_INS));
 	if (jump)
 		jump->addr = compiler->size;
 	return push_inst(compiler, NOP, UNMOVABLE_INS);
@@ -1327,7 +1332,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 
 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
 	op = GET_OPCODE(op);
-	reg = (op < SLJIT_ADD && dst <= TMP_REG3) ? dst : TMP_REG2;
+	reg = (op < SLJIT_ADD && FAST_IS_REG(dst)) ? dst : TMP_REG2;
 
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
@@ -1368,12 +1373,11 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 	PTR_FAIL_IF(!const_);
 	set_const(const_, compiler);
 
-	reg = (dst <= TMP_REG3) ? dst : TMP_REG2;
+	reg = SLOW_IS_REG(dst) ? dst : TMP_REG2;
 
 	PTR_FAIL_IF(emit_const(compiler, reg, init_value));
 
 	if (dst & SLJIT_MEM)
 		PTR_FAIL_IF(emit_op_mem(compiler, WORD_DATA, TMP_REG2, dst, dstw));
-
 	return const_;
 }
diff --git a/src/3rdparty/pcre/sljit/sljitNativeTILEGX-encoder.c b/src/3rdparty/pcre/sljit/sljitNativeTILEGX-encoder.c
new file mode 100644
index 0000000000..719632908c
--- /dev/null
+++ b/src/3rdparty/pcre/sljit/sljitNativeTILEGX-encoder.c
@@ -0,0 +1,10159 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2013-2013 Tilera Corporation(jiwang@tilera.com). All rights reserved.
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* This code is owned by Tilera Corporation, and distributed as part
+   of multiple projects. In sljit, the code is under BSD licence.  */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#define BFD_RELOC(x) R_##x
+
+/* Special registers. */
+#define TREG_LR 55
+#define TREG_SN 56
+#define TREG_ZERO 63
+
+/* Canonical name of each register. */
+const char *const tilegx_register_names[] =
+{
+  "r0",   "r1",  "r2",  "r3",  "r4",  "r5",  "r6",  "r7",
+  "r8",   "r9",  "r10", "r11", "r12", "r13", "r14", "r15",
+  "r16",  "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+  "r24",  "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+  "r32",  "r33", "r34", "r35", "r36", "r37", "r38", "r39",
+  "r40",  "r41", "r42", "r43", "r44", "r45", "r46", "r47",
+  "r48",  "r49", "r50", "r51", "r52", "tp",  "sp",  "lr",
+  "sn",  "idn0", "idn1", "udn0", "udn1", "udn2", "udn3", "zero"
+};
+
+enum
+{
+  R_NONE = 0,
+  R_TILEGX_NONE = 0,
+  R_TILEGX_64 = 1,
+  R_TILEGX_32 = 2,
+  R_TILEGX_16 = 3,
+  R_TILEGX_8 = 4,
+  R_TILEGX_64_PCREL = 5,
+  R_TILEGX_32_PCREL = 6,
+  R_TILEGX_16_PCREL = 7,
+  R_TILEGX_8_PCREL = 8,
+  R_TILEGX_HW0 = 9,
+  R_TILEGX_HW1 = 10,
+  R_TILEGX_HW2 = 11,
+  R_TILEGX_HW3 = 12,
+  R_TILEGX_HW0_LAST = 13,
+  R_TILEGX_HW1_LAST = 14,
+  R_TILEGX_HW2_LAST = 15,
+  R_TILEGX_COPY = 16,
+  R_TILEGX_GLOB_DAT = 17,
+  R_TILEGX_JMP_SLOT = 18,
+  R_TILEGX_RELATIVE = 19,
+  R_TILEGX_BROFF_X1 = 20,
+  R_TILEGX_JUMPOFF_X1 = 21,
+  R_TILEGX_JUMPOFF_X1_PLT = 22,
+  R_TILEGX_IMM8_X0 = 23,
+  R_TILEGX_IMM8_Y0 = 24,
+  R_TILEGX_IMM8_X1 = 25,
+  R_TILEGX_IMM8_Y1 = 26,
+  R_TILEGX_DEST_IMM8_X1 = 27,
+  R_TILEGX_MT_IMM14_X1 = 28,
+  R_TILEGX_MF_IMM14_X1 = 29,
+  R_TILEGX_MMSTART_X0 = 30,
+  R_TILEGX_MMEND_X0 = 31,
+  R_TILEGX_SHAMT_X0 = 32,
+  R_TILEGX_SHAMT_X1 = 33,
+  R_TILEGX_SHAMT_Y0 = 34,
+  R_TILEGX_SHAMT_Y1 = 35,
+  R_TILEGX_IMM16_X0_HW0 = 36,
+  R_TILEGX_IMM16_X1_HW0 = 37,
+  R_TILEGX_IMM16_X0_HW1 = 38,
+  R_TILEGX_IMM16_X1_HW1 = 39,
+  R_TILEGX_IMM16_X0_HW2 = 40,
+  R_TILEGX_IMM16_X1_HW2 = 41,
+  R_TILEGX_IMM16_X0_HW3 = 42,
+  R_TILEGX_IMM16_X1_HW3 = 43,
+  R_TILEGX_IMM16_X0_HW0_LAST = 44,
+  R_TILEGX_IMM16_X1_HW0_LAST = 45,
+  R_TILEGX_IMM16_X0_HW1_LAST = 46,
+  R_TILEGX_IMM16_X1_HW1_LAST = 47,
+  R_TILEGX_IMM16_X0_HW2_LAST = 48,
+  R_TILEGX_IMM16_X1_HW2_LAST = 49,
+  R_TILEGX_IMM16_X0_HW0_PCREL = 50,
+  R_TILEGX_IMM16_X1_HW0_PCREL = 51,
+  R_TILEGX_IMM16_X0_HW1_PCREL = 52,
+  R_TILEGX_IMM16_X1_HW1_PCREL = 53,
+  R_TILEGX_IMM16_X0_HW2_PCREL = 54,
+  R_TILEGX_IMM16_X1_HW2_PCREL = 55,
+  R_TILEGX_IMM16_X0_HW3_PCREL = 56,
+  R_TILEGX_IMM16_X1_HW3_PCREL = 57,
+  R_TILEGX_IMM16_X0_HW0_LAST_PCREL = 58,
+  R_TILEGX_IMM16_X1_HW0_LAST_PCREL = 59,
+  R_TILEGX_IMM16_X0_HW1_LAST_PCREL = 60,
+  R_TILEGX_IMM16_X1_HW1_LAST_PCREL = 61,
+  R_TILEGX_IMM16_X0_HW2_LAST_PCREL = 62,
+  R_TILEGX_IMM16_X1_HW2_LAST_PCREL = 63,
+  R_TILEGX_IMM16_X0_HW0_GOT = 64,
+  R_TILEGX_IMM16_X1_HW0_GOT = 65,
+
+  R_TILEGX_IMM16_X0_HW0_PLT_PCREL = 66,
+  R_TILEGX_IMM16_X1_HW0_PLT_PCREL = 67,
+  R_TILEGX_IMM16_X0_HW1_PLT_PCREL = 68,
+  R_TILEGX_IMM16_X1_HW1_PLT_PCREL = 69,
+  R_TILEGX_IMM16_X0_HW2_PLT_PCREL = 70,
+  R_TILEGX_IMM16_X1_HW2_PLT_PCREL = 71,
+
+  R_TILEGX_IMM16_X0_HW0_LAST_GOT = 72,
+  R_TILEGX_IMM16_X1_HW0_LAST_GOT = 73,
+  R_TILEGX_IMM16_X0_HW1_LAST_GOT = 74,
+  R_TILEGX_IMM16_X1_HW1_LAST_GOT = 75,
+  R_TILEGX_IMM16_X0_HW0_TLS_GD = 78,
+  R_TILEGX_IMM16_X1_HW0_TLS_GD = 79,
+  R_TILEGX_IMM16_X0_HW0_TLS_LE = 80,
+  R_TILEGX_IMM16_X1_HW0_TLS_LE = 81,
+  R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE = 82,
+  R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE = 83,
+  R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE = 84,
+  R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE = 85,
+  R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD = 86,
+  R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD = 87,
+  R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD = 88,
+  R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD = 89,
+  R_TILEGX_IMM16_X0_HW0_TLS_IE = 92,
+  R_TILEGX_IMM16_X1_HW0_TLS_IE = 93,
+
+  R_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL = 94,
+  R_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL = 95,
+  R_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL = 96,
+  R_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL = 97,
+  R_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL = 98,
+  R_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL = 99,
+
+  R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE = 100,
+  R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE = 101,
+  R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE = 102,
+  R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE = 103,
+  R_TILEGX_TLS_DTPMOD64 = 106,
+  R_TILEGX_TLS_DTPOFF64 = 107,
+  R_TILEGX_TLS_TPOFF64 = 108,
+  R_TILEGX_TLS_DTPMOD32 = 109,
+  R_TILEGX_TLS_DTPOFF32 = 110,
+  R_TILEGX_TLS_TPOFF32 = 111,
+  R_TILEGX_TLS_GD_CALL = 112,
+  R_TILEGX_IMM8_X0_TLS_GD_ADD = 113,
+  R_TILEGX_IMM8_X1_TLS_GD_ADD = 114,
+  R_TILEGX_IMM8_Y0_TLS_GD_ADD = 115,
+  R_TILEGX_IMM8_Y1_TLS_GD_ADD = 116,
+  R_TILEGX_TLS_IE_LOAD = 117,
+  R_TILEGX_IMM8_X0_TLS_ADD = 118,
+  R_TILEGX_IMM8_X1_TLS_ADD = 119,
+  R_TILEGX_IMM8_Y0_TLS_ADD = 120,
+  R_TILEGX_IMM8_Y1_TLS_ADD = 121,
+  R_TILEGX_GNU_VTINHERIT = 128,
+  R_TILEGX_GNU_VTENTRY = 129,
+  R_TILEGX_IRELATIVE = 130,
+  R_TILEGX_NUM = 131
+};
+
+typedef enum
+{
+  TILEGX_PIPELINE_X0,
+  TILEGX_PIPELINE_X1,
+  TILEGX_PIPELINE_Y0,
+  TILEGX_PIPELINE_Y1,
+  TILEGX_PIPELINE_Y2,
+} tilegx_pipeline;
+
+typedef unsigned long long tilegx_bundle_bits;
+
+/* These are the bits that determine if a bundle is in the X encoding. */
+#define TILEGX_BUNDLE_MODE_MASK ((tilegx_bundle_bits)3 << 62)
+
+enum
+{
+  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+  TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+  TILEGX_NUM_PIPELINE_ENCODINGS = 5,
+
+  /* Log base 2 of TILEGX_BUNDLE_SIZE_IN_BYTES. */
+  TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+  /* Instructions take this many bytes. */
+  TILEGX_BUNDLE_SIZE_IN_BYTES = 1 << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+  /* Log base 2 of TILEGX_BUNDLE_ALIGNMENT_IN_BYTES. */
+  TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+  /* Bundles should be aligned modulo this number of bytes. */
+  TILEGX_BUNDLE_ALIGNMENT_IN_BYTES =
+    (1 << TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+  /* Number of registers (some are magic, such as network I/O). */
+  TILEGX_NUM_REGISTERS = 64,
+};
+
+/* Make a few "tile_" variables to simplify common code between
+   architectures.  */
+
+typedef tilegx_bundle_bits tile_bundle_bits;
+#define TILE_BUNDLE_SIZE_IN_BYTES TILEGX_BUNDLE_SIZE_IN_BYTES
+#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES
+#define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \
+  TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILEGX_BPT_BUNDLE 0x286a44ae51485000ULL
+
+typedef enum
+{
+  TILEGX_OP_TYPE_REGISTER,
+  TILEGX_OP_TYPE_IMMEDIATE,
+  TILEGX_OP_TYPE_ADDRESS,
+  TILEGX_OP_TYPE_SPR
+} tilegx_operand_type;
+
+struct tilegx_operand
+{
+  /* Is this operand a register, immediate or address? */
+  tilegx_operand_type type;
+
+  /* The default relocation type for this operand.  */
+  signed int default_reloc : 16;
+
+  /* How many bits is this value? (used for range checking) */
+  unsigned int num_bits : 5;
+
+  /* Is the value signed? (used for range checking) */
+  unsigned int is_signed : 1;
+
+  /* Is this operand a source register? */
+  unsigned int is_src_reg : 1;
+
+  /* Is this operand written? (i.e. is it a destination register) */
+  unsigned int is_dest_reg : 1;
+
+  /* Is this operand PC-relative? */
+  unsigned int is_pc_relative : 1;
+
+  /* By how many bits do we right shift the value before inserting? */
+  unsigned int rightshift : 2;
+
+  /* Return the bits for this operand to be ORed into an existing bundle. */
+  tilegx_bundle_bits (*insert) (int op);
+
+  /* Extract this operand and return it. */
+  unsigned int (*extract) (tilegx_bundle_bits bundle);
+};
+
+typedef enum
+{
+  TILEGX_OPC_BPT,
+  TILEGX_OPC_INFO,
+  TILEGX_OPC_INFOL,
+  TILEGX_OPC_LD4S_TLS,
+  TILEGX_OPC_LD_TLS,
+  TILEGX_OPC_MOVE,
+  TILEGX_OPC_MOVEI,
+  TILEGX_OPC_MOVELI,
+  TILEGX_OPC_PREFETCH,
+  TILEGX_OPC_PREFETCH_ADD_L1,
+  TILEGX_OPC_PREFETCH_ADD_L1_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L2,
+  TILEGX_OPC_PREFETCH_ADD_L2_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L3,
+  TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  TILEGX_OPC_PREFETCH_L1,
+  TILEGX_OPC_PREFETCH_L1_FAULT,
+  TILEGX_OPC_PREFETCH_L2,
+  TILEGX_OPC_PREFETCH_L2_FAULT,
+  TILEGX_OPC_PREFETCH_L3,
+  TILEGX_OPC_PREFETCH_L3_FAULT,
+  TILEGX_OPC_RAISE,
+  TILEGX_OPC_ADD,
+  TILEGX_OPC_ADDI,
+  TILEGX_OPC_ADDLI,
+  TILEGX_OPC_ADDX,
+  TILEGX_OPC_ADDXI,
+  TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXSC,
+  TILEGX_OPC_AND,
+  TILEGX_OPC_ANDI,
+  TILEGX_OPC_BEQZ,
+  TILEGX_OPC_BEQZT,
+  TILEGX_OPC_BFEXTS,
+  TILEGX_OPC_BFEXTU,
+  TILEGX_OPC_BFINS,
+  TILEGX_OPC_BGEZ,
+  TILEGX_OPC_BGEZT,
+  TILEGX_OPC_BGTZ,
+  TILEGX_OPC_BGTZT,
+  TILEGX_OPC_BLBC,
+  TILEGX_OPC_BLBCT,
+  TILEGX_OPC_BLBS,
+  TILEGX_OPC_BLBST,
+  TILEGX_OPC_BLEZ,
+  TILEGX_OPC_BLEZT,
+  TILEGX_OPC_BLTZ,
+  TILEGX_OPC_BLTZT,
+  TILEGX_OPC_BNEZ,
+  TILEGX_OPC_BNEZT,
+  TILEGX_OPC_CLZ,
+  TILEGX_OPC_CMOVEQZ,
+  TILEGX_OPC_CMOVNEZ,
+  TILEGX_OPC_CMPEQ,
+  TILEGX_OPC_CMPEQI,
+  TILEGX_OPC_CMPEXCH,
+  TILEGX_OPC_CMPEXCH4,
+  TILEGX_OPC_CMPLES,
+  TILEGX_OPC_CMPLEU,
+  TILEGX_OPC_CMPLTS,
+  TILEGX_OPC_CMPLTSI,
+  TILEGX_OPC_CMPLTU,
+  TILEGX_OPC_CMPLTUI,
+  TILEGX_OPC_CMPNE,
+  TILEGX_OPC_CMUL,
+  TILEGX_OPC_CMULA,
+  TILEGX_OPC_CMULAF,
+  TILEGX_OPC_CMULF,
+  TILEGX_OPC_CMULFR,
+  TILEGX_OPC_CMULH,
+  TILEGX_OPC_CMULHR,
+  TILEGX_OPC_CRC32_32,
+  TILEGX_OPC_CRC32_8,
+  TILEGX_OPC_CTZ,
+  TILEGX_OPC_DBLALIGN,
+  TILEGX_OPC_DBLALIGN2,
+  TILEGX_OPC_DBLALIGN4,
+  TILEGX_OPC_DBLALIGN6,
+  TILEGX_OPC_DRAIN,
+  TILEGX_OPC_DTLBPR,
+  TILEGX_OPC_EXCH,
+  TILEGX_OPC_EXCH4,
+  TILEGX_OPC_FDOUBLE_ADD_FLAGS,
+  TILEGX_OPC_FDOUBLE_ADDSUB,
+  TILEGX_OPC_FDOUBLE_MUL_FLAGS,
+  TILEGX_OPC_FDOUBLE_PACK1,
+  TILEGX_OPC_FDOUBLE_PACK2,
+  TILEGX_OPC_FDOUBLE_SUB_FLAGS,
+  TILEGX_OPC_FDOUBLE_UNPACK_MAX,
+  TILEGX_OPC_FDOUBLE_UNPACK_MIN,
+  TILEGX_OPC_FETCHADD,
+  TILEGX_OPC_FETCHADD4,
+  TILEGX_OPC_FETCHADDGEZ,
+  TILEGX_OPC_FETCHADDGEZ4,
+  TILEGX_OPC_FETCHAND,
+  TILEGX_OPC_FETCHAND4,
+  TILEGX_OPC_FETCHOR,
+  TILEGX_OPC_FETCHOR4,
+  TILEGX_OPC_FINV,
+  TILEGX_OPC_FLUSH,
+  TILEGX_OPC_FLUSHWB,
+  TILEGX_OPC_FNOP,
+  TILEGX_OPC_FSINGLE_ADD1,
+  TILEGX_OPC_FSINGLE_ADDSUB2,
+  TILEGX_OPC_FSINGLE_MUL1,
+  TILEGX_OPC_FSINGLE_MUL2,
+  TILEGX_OPC_FSINGLE_PACK1,
+  TILEGX_OPC_FSINGLE_PACK2,
+  TILEGX_OPC_FSINGLE_SUB1,
+  TILEGX_OPC_ICOH,
+  TILEGX_OPC_ILL,
+  TILEGX_OPC_INV,
+  TILEGX_OPC_IRET,
+  TILEGX_OPC_J,
+  TILEGX_OPC_JAL,
+  TILEGX_OPC_JALR,
+  TILEGX_OPC_JALRP,
+  TILEGX_OPC_JR,
+  TILEGX_OPC_JRP,
+  TILEGX_OPC_LD,
+  TILEGX_OPC_LD1S,
+  TILEGX_OPC_LD1S_ADD,
+  TILEGX_OPC_LD1U,
+  TILEGX_OPC_LD1U_ADD,
+  TILEGX_OPC_LD2S,
+  TILEGX_OPC_LD2S_ADD,
+  TILEGX_OPC_LD2U,
+  TILEGX_OPC_LD2U_ADD,
+  TILEGX_OPC_LD4S,
+  TILEGX_OPC_LD4S_ADD,
+  TILEGX_OPC_LD4U,
+  TILEGX_OPC_LD4U_ADD,
+  TILEGX_OPC_LD_ADD,
+  TILEGX_OPC_LDNA,
+  TILEGX_OPC_LDNA_ADD,
+  TILEGX_OPC_LDNT,
+  TILEGX_OPC_LDNT1S,
+  TILEGX_OPC_LDNT1S_ADD,
+  TILEGX_OPC_LDNT1U,
+  TILEGX_OPC_LDNT1U_ADD,
+  TILEGX_OPC_LDNT2S,
+  TILEGX_OPC_LDNT2S_ADD,
+  TILEGX_OPC_LDNT2U,
+  TILEGX_OPC_LDNT2U_ADD,
+  TILEGX_OPC_LDNT4S,
+  TILEGX_OPC_LDNT4S_ADD,
+  TILEGX_OPC_LDNT4U,
+  TILEGX_OPC_LDNT4U_ADD,
+  TILEGX_OPC_LDNT_ADD,
+  TILEGX_OPC_LNK,
+  TILEGX_OPC_MF,
+  TILEGX_OPC_MFSPR,
+  TILEGX_OPC_MM,
+  TILEGX_OPC_MNZ,
+  TILEGX_OPC_MTSPR,
+  TILEGX_OPC_MUL_HS_HS,
+  TILEGX_OPC_MUL_HS_HU,
+  TILEGX_OPC_MUL_HS_LS,
+  TILEGX_OPC_MUL_HS_LU,
+  TILEGX_OPC_MUL_HU_HU,
+  TILEGX_OPC_MUL_HU_LS,
+  TILEGX_OPC_MUL_HU_LU,
+  TILEGX_OPC_MUL_LS_LS,
+  TILEGX_OPC_MUL_LS_LU,
+  TILEGX_OPC_MUL_LU_LU,
+  TILEGX_OPC_MULA_HS_HS,
+  TILEGX_OPC_MULA_HS_HU,
+  TILEGX_OPC_MULA_HS_LS,
+  TILEGX_OPC_MULA_HS_LU,
+  TILEGX_OPC_MULA_HU_HU,
+  TILEGX_OPC_MULA_HU_LS,
+  TILEGX_OPC_MULA_HU_LU,
+  TILEGX_OPC_MULA_LS_LS,
+  TILEGX_OPC_MULA_LS_LU,
+  TILEGX_OPC_MULA_LU_LU,
+  TILEGX_OPC_MULAX,
+  TILEGX_OPC_MULX,
+  TILEGX_OPC_MZ,
+  TILEGX_OPC_NAP,
+  TILEGX_OPC_NOP,
+  TILEGX_OPC_NOR,
+  TILEGX_OPC_OR,
+  TILEGX_OPC_ORI,
+  TILEGX_OPC_PCNT,
+  TILEGX_OPC_REVBITS,
+  TILEGX_OPC_REVBYTES,
+  TILEGX_OPC_ROTL,
+  TILEGX_OPC_ROTLI,
+  TILEGX_OPC_SHL,
+  TILEGX_OPC_SHL16INSLI,
+  TILEGX_OPC_SHL1ADD,
+  TILEGX_OPC_SHL1ADDX,
+  TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL2ADDX,
+  TILEGX_OPC_SHL3ADD,
+  TILEGX_OPC_SHL3ADDX,
+  TILEGX_OPC_SHLI,
+  TILEGX_OPC_SHLX,
+  TILEGX_OPC_SHLXI,
+  TILEGX_OPC_SHRS,
+  TILEGX_OPC_SHRSI,
+  TILEGX_OPC_SHRU,
+  TILEGX_OPC_SHRUI,
+  TILEGX_OPC_SHRUX,
+  TILEGX_OPC_SHRUXI,
+  TILEGX_OPC_SHUFFLEBYTES,
+  TILEGX_OPC_ST,
+  TILEGX_OPC_ST1,
+  TILEGX_OPC_ST1_ADD,
+  TILEGX_OPC_ST2,
+  TILEGX_OPC_ST2_ADD,
+  TILEGX_OPC_ST4,
+  TILEGX_OPC_ST4_ADD,
+  TILEGX_OPC_ST_ADD,
+  TILEGX_OPC_STNT,
+  TILEGX_OPC_STNT1,
+  TILEGX_OPC_STNT1_ADD,
+  TILEGX_OPC_STNT2,
+  TILEGX_OPC_STNT2_ADD,
+  TILEGX_OPC_STNT4,
+  TILEGX_OPC_STNT4_ADD,
+  TILEGX_OPC_STNT_ADD,
+  TILEGX_OPC_SUB,
+  TILEGX_OPC_SUBX,
+  TILEGX_OPC_SUBXSC,
+  TILEGX_OPC_SWINT0,
+  TILEGX_OPC_SWINT1,
+  TILEGX_OPC_SWINT2,
+  TILEGX_OPC_SWINT3,
+  TILEGX_OPC_TBLIDXB0,
+  TILEGX_OPC_TBLIDXB1,
+  TILEGX_OPC_TBLIDXB2,
+  TILEGX_OPC_TBLIDXB3,
+  TILEGX_OPC_V1ADD,
+  TILEGX_OPC_V1ADDI,
+  TILEGX_OPC_V1ADDUC,
+  TILEGX_OPC_V1ADIFFU,
+  TILEGX_OPC_V1AVGU,
+  TILEGX_OPC_V1CMPEQ,
+  TILEGX_OPC_V1CMPEQI,
+  TILEGX_OPC_V1CMPLES,
+  TILEGX_OPC_V1CMPLEU,
+  TILEGX_OPC_V1CMPLTS,
+  TILEGX_OPC_V1CMPLTSI,
+  TILEGX_OPC_V1CMPLTU,
+  TILEGX_OPC_V1CMPLTUI,
+  TILEGX_OPC_V1CMPNE,
+  TILEGX_OPC_V1DDOTPU,
+  TILEGX_OPC_V1DDOTPUA,
+  TILEGX_OPC_V1DDOTPUS,
+  TILEGX_OPC_V1DDOTPUSA,
+  TILEGX_OPC_V1DOTP,
+  TILEGX_OPC_V1DOTPA,
+  TILEGX_OPC_V1DOTPU,
+  TILEGX_OPC_V1DOTPUA,
+  TILEGX_OPC_V1DOTPUS,
+  TILEGX_OPC_V1DOTPUSA,
+  TILEGX_OPC_V1INT_H,
+  TILEGX_OPC_V1INT_L,
+  TILEGX_OPC_V1MAXU,
+  TILEGX_OPC_V1MAXUI,
+  TILEGX_OPC_V1MINU,
+  TILEGX_OPC_V1MINUI,
+  TILEGX_OPC_V1MNZ,
+  TILEGX_OPC_V1MULTU,
+  TILEGX_OPC_V1MULU,
+  TILEGX_OPC_V1MULUS,
+  TILEGX_OPC_V1MZ,
+  TILEGX_OPC_V1SADAU,
+  TILEGX_OPC_V1SADU,
+  TILEGX_OPC_V1SHL,
+  TILEGX_OPC_V1SHLI,
+  TILEGX_OPC_V1SHRS,
+  TILEGX_OPC_V1SHRSI,
+  TILEGX_OPC_V1SHRU,
+  TILEGX_OPC_V1SHRUI,
+  TILEGX_OPC_V1SUB,
+  TILEGX_OPC_V1SUBUC,
+  TILEGX_OPC_V2ADD,
+  TILEGX_OPC_V2ADDI,
+  TILEGX_OPC_V2ADDSC,
+  TILEGX_OPC_V2ADIFFS,
+  TILEGX_OPC_V2AVGS,
+  TILEGX_OPC_V2CMPEQ,
+  TILEGX_OPC_V2CMPEQI,
+  TILEGX_OPC_V2CMPLES,
+  TILEGX_OPC_V2CMPLEU,
+  TILEGX_OPC_V2CMPLTS,
+  TILEGX_OPC_V2CMPLTSI,
+  TILEGX_OPC_V2CMPLTU,
+  TILEGX_OPC_V2CMPLTUI,
+  TILEGX_OPC_V2CMPNE,
+  TILEGX_OPC_V2DOTP,
+  TILEGX_OPC_V2DOTPA,
+  TILEGX_OPC_V2INT_H,
+  TILEGX_OPC_V2INT_L,
+  TILEGX_OPC_V2MAXS,
+  TILEGX_OPC_V2MAXSI,
+  TILEGX_OPC_V2MINS,
+  TILEGX_OPC_V2MINSI,
+  TILEGX_OPC_V2MNZ,
+  TILEGX_OPC_V2MULFSC,
+  TILEGX_OPC_V2MULS,
+  TILEGX_OPC_V2MULTS,
+  TILEGX_OPC_V2MZ,
+  TILEGX_OPC_V2PACKH,
+  TILEGX_OPC_V2PACKL,
+  TILEGX_OPC_V2PACKUC,
+  TILEGX_OPC_V2SADAS,
+  TILEGX_OPC_V2SADAU,
+  TILEGX_OPC_V2SADS,
+  TILEGX_OPC_V2SADU,
+  TILEGX_OPC_V2SHL,
+  TILEGX_OPC_V2SHLI,
+  TILEGX_OPC_V2SHLSC,
+  TILEGX_OPC_V2SHRS,
+  TILEGX_OPC_V2SHRSI,
+  TILEGX_OPC_V2SHRU,
+  TILEGX_OPC_V2SHRUI,
+  TILEGX_OPC_V2SUB,
+  TILEGX_OPC_V2SUBSC,
+  TILEGX_OPC_V4ADD,
+  TILEGX_OPC_V4ADDSC,
+  TILEGX_OPC_V4INT_H,
+  TILEGX_OPC_V4INT_L,
+  TILEGX_OPC_V4PACKSC,
+  TILEGX_OPC_V4SHL,
+  TILEGX_OPC_V4SHLSC,
+  TILEGX_OPC_V4SHRS,
+  TILEGX_OPC_V4SHRU,
+  TILEGX_OPC_V4SUB,
+  TILEGX_OPC_V4SUBSC,
+  TILEGX_OPC_WH64,
+  TILEGX_OPC_XOR,
+  TILEGX_OPC_XORI,
+  TILEGX_OPC_NONE
+} tilegx_mnemonic;
+
+enum
+{
+  TILEGX_MAX_OPERANDS = 4 /* bfexts */
+};
+
+struct tilegx_opcode
+{
+  /* The opcode mnemonic, e.g. "add" */
+  const char *name;
+
+  /* The enum value for this mnemonic. */
+  tilegx_mnemonic mnemonic;
+
+  /* A bit mask of which of the five pipes this instruction
+     is compatible with:
+     X0  0x01
+     X1  0x02
+     Y0  0x04
+     Y1  0x08
+     Y2  0x10 */
+  unsigned char pipes;
+
+  /* How many operands are there? */
+  unsigned char num_operands;
+
+  /* Which register does this write implicitly, or TREG_ZERO if none? */
+  unsigned char implicitly_written_register;
+
+  /* Can this be bundled with other instructions (almost always true). */
+  unsigned char can_bundle;
+
+  /* The description of the operands. Each of these is an
+   * index into the tilegx_operands[] table. */
+  unsigned char operands[TILEGX_NUM_PIPELINE_ENCODINGS][TILEGX_MAX_OPERANDS];
+
+  /* A mask of which bits have predefined values for each pipeline.
+   * This is useful for disassembly. */
+  tilegx_bundle_bits fixed_bit_masks[TILEGX_NUM_PIPELINE_ENCODINGS];
+
+  /* For each bit set in fixed_bit_masks, what the value is for this
+   * instruction. */
+  tilegx_bundle_bits fixed_bit_values[TILEGX_NUM_PIPELINE_ENCODINGS];
+};
+
+/* Used for non-textual disassembly into structs. */
+struct tilegx_decoded_instruction
+{
+  const struct tilegx_opcode *opcode;
+  const struct tilegx_operand *operands[TILEGX_MAX_OPERANDS];
+  long long operand_values[TILEGX_MAX_OPERANDS];
+};
+
+enum
+{
+  ADDI_IMM8_OPCODE_X0 = 1,
+  ADDI_IMM8_OPCODE_X1 = 1,
+  ADDI_OPCODE_Y0 = 0,
+  ADDI_OPCODE_Y1 = 1,
+  ADDLI_OPCODE_X0 = 1,
+  ADDLI_OPCODE_X1 = 0,
+  ADDXI_IMM8_OPCODE_X0 = 2,
+  ADDXI_IMM8_OPCODE_X1 = 2,
+  ADDXI_OPCODE_Y0 = 1,
+  ADDXI_OPCODE_Y1 = 2,
+  ADDXLI_OPCODE_X0 = 2,
+  ADDXLI_OPCODE_X1 = 1,
+  ADDXSC_RRR_0_OPCODE_X0 = 1,
+  ADDXSC_RRR_0_OPCODE_X1 = 1,
+  ADDX_RRR_0_OPCODE_X0 = 2,
+  ADDX_RRR_0_OPCODE_X1 = 2,
+  ADDX_RRR_0_OPCODE_Y0 = 0,
+  ADDX_SPECIAL_0_OPCODE_Y1 = 0,
+  ADD_RRR_0_OPCODE_X0 = 3,
+  ADD_RRR_0_OPCODE_X1 = 3,
+  ADD_RRR_0_OPCODE_Y0 = 1,
+  ADD_SPECIAL_0_OPCODE_Y1 = 1,
+  ANDI_IMM8_OPCODE_X0 = 3,
+  ANDI_IMM8_OPCODE_X1 = 3,
+  ANDI_OPCODE_Y0 = 2,
+  ANDI_OPCODE_Y1 = 3,
+  AND_RRR_0_OPCODE_X0 = 4,
+  AND_RRR_0_OPCODE_X1 = 4,
+  AND_RRR_5_OPCODE_Y0 = 0,
+  AND_RRR_5_OPCODE_Y1 = 0,
+  BEQZT_BRANCH_OPCODE_X1 = 16,
+  BEQZ_BRANCH_OPCODE_X1 = 17,
+  BFEXTS_BF_OPCODE_X0 = 4,
+  BFEXTU_BF_OPCODE_X0 = 5,
+  BFINS_BF_OPCODE_X0 = 6,
+  BF_OPCODE_X0 = 3,
+  BGEZT_BRANCH_OPCODE_X1 = 18,
+  BGEZ_BRANCH_OPCODE_X1 = 19,
+  BGTZT_BRANCH_OPCODE_X1 = 20,
+  BGTZ_BRANCH_OPCODE_X1 = 21,
+  BLBCT_BRANCH_OPCODE_X1 = 22,
+  BLBC_BRANCH_OPCODE_X1 = 23,
+  BLBST_BRANCH_OPCODE_X1 = 24,
+  BLBS_BRANCH_OPCODE_X1 = 25,
+  BLEZT_BRANCH_OPCODE_X1 = 26,
+  BLEZ_BRANCH_OPCODE_X1 = 27,
+  BLTZT_BRANCH_OPCODE_X1 = 28,
+  BLTZ_BRANCH_OPCODE_X1 = 29,
+  BNEZT_BRANCH_OPCODE_X1 = 30,
+  BNEZ_BRANCH_OPCODE_X1 = 31,
+  BRANCH_OPCODE_X1 = 2,
+  CMOVEQZ_RRR_0_OPCODE_X0 = 5,
+  CMOVEQZ_RRR_4_OPCODE_Y0 = 0,
+  CMOVNEZ_RRR_0_OPCODE_X0 = 6,
+  CMOVNEZ_RRR_4_OPCODE_Y0 = 1,
+  CMPEQI_IMM8_OPCODE_X0 = 4,
+  CMPEQI_IMM8_OPCODE_X1 = 4,
+  CMPEQI_OPCODE_Y0 = 3,
+  CMPEQI_OPCODE_Y1 = 4,
+  CMPEQ_RRR_0_OPCODE_X0 = 7,
+  CMPEQ_RRR_0_OPCODE_X1 = 5,
+  CMPEQ_RRR_3_OPCODE_Y0 = 0,
+  CMPEQ_RRR_3_OPCODE_Y1 = 2,
+  CMPEXCH4_RRR_0_OPCODE_X1 = 6,
+  CMPEXCH_RRR_0_OPCODE_X1 = 7,
+  CMPLES_RRR_0_OPCODE_X0 = 8,
+  CMPLES_RRR_0_OPCODE_X1 = 8,
+  CMPLES_RRR_2_OPCODE_Y0 = 0,
+  CMPLES_RRR_2_OPCODE_Y1 = 0,
+  CMPLEU_RRR_0_OPCODE_X0 = 9,
+  CMPLEU_RRR_0_OPCODE_X1 = 9,
+  CMPLEU_RRR_2_OPCODE_Y0 = 1,
+  CMPLEU_RRR_2_OPCODE_Y1 = 1,
+  CMPLTSI_IMM8_OPCODE_X0 = 5,
+  CMPLTSI_IMM8_OPCODE_X1 = 5,
+  CMPLTSI_OPCODE_Y0 = 4,
+  CMPLTSI_OPCODE_Y1 = 5,
+  CMPLTS_RRR_0_OPCODE_X0 = 10,
+  CMPLTS_RRR_0_OPCODE_X1 = 10,
+  CMPLTS_RRR_2_OPCODE_Y0 = 2,
+  CMPLTS_RRR_2_OPCODE_Y1 = 2,
+  CMPLTUI_IMM8_OPCODE_X0 = 6,
+  CMPLTUI_IMM8_OPCODE_X1 = 6,
+  CMPLTU_RRR_0_OPCODE_X0 = 11,
+  CMPLTU_RRR_0_OPCODE_X1 = 11,
+  CMPLTU_RRR_2_OPCODE_Y0 = 3,
+  CMPLTU_RRR_2_OPCODE_Y1 = 3,
+  CMPNE_RRR_0_OPCODE_X0 = 12,
+  CMPNE_RRR_0_OPCODE_X1 = 12,
+  CMPNE_RRR_3_OPCODE_Y0 = 1,
+  CMPNE_RRR_3_OPCODE_Y1 = 3,
+  CMULAF_RRR_0_OPCODE_X0 = 13,
+  CMULA_RRR_0_OPCODE_X0 = 14,
+  CMULFR_RRR_0_OPCODE_X0 = 15,
+  CMULF_RRR_0_OPCODE_X0 = 16,
+  CMULHR_RRR_0_OPCODE_X0 = 17,
+  CMULH_RRR_0_OPCODE_X0 = 18,
+  CMUL_RRR_0_OPCODE_X0 = 19,
+  CNTLZ_UNARY_OPCODE_X0 = 1,
+  CNTLZ_UNARY_OPCODE_Y0 = 1,
+  CNTTZ_UNARY_OPCODE_X0 = 2,
+  CNTTZ_UNARY_OPCODE_Y0 = 2,
+  CRC32_32_RRR_0_OPCODE_X0 = 20,
+  CRC32_8_RRR_0_OPCODE_X0 = 21,
+  DBLALIGN2_RRR_0_OPCODE_X0 = 22,
+  DBLALIGN2_RRR_0_OPCODE_X1 = 13,
+  DBLALIGN4_RRR_0_OPCODE_X0 = 23,
+  DBLALIGN4_RRR_0_OPCODE_X1 = 14,
+  DBLALIGN6_RRR_0_OPCODE_X0 = 24,
+  DBLALIGN6_RRR_0_OPCODE_X1 = 15,
+  DBLALIGN_RRR_0_OPCODE_X0 = 25,
+  DRAIN_UNARY_OPCODE_X1 = 1,
+  DTLBPR_UNARY_OPCODE_X1 = 2,
+  EXCH4_RRR_0_OPCODE_X1 = 16,
+  EXCH_RRR_0_OPCODE_X1 = 17,
+  FDOUBLE_ADDSUB_RRR_0_OPCODE_X0 = 26,
+  FDOUBLE_ADD_FLAGS_RRR_0_OPCODE_X0 = 27,
+  FDOUBLE_MUL_FLAGS_RRR_0_OPCODE_X0 = 28,
+  FDOUBLE_PACK1_RRR_0_OPCODE_X0 = 29,
+  FDOUBLE_PACK2_RRR_0_OPCODE_X0 = 30,
+  FDOUBLE_SUB_FLAGS_RRR_0_OPCODE_X0 = 31,
+  FDOUBLE_UNPACK_MAX_RRR_0_OPCODE_X0 = 32,
+  FDOUBLE_UNPACK_MIN_RRR_0_OPCODE_X0 = 33,
+  FETCHADD4_RRR_0_OPCODE_X1 = 18,
+  FETCHADDGEZ4_RRR_0_OPCODE_X1 = 19,
+  FETCHADDGEZ_RRR_0_OPCODE_X1 = 20,
+  FETCHADD_RRR_0_OPCODE_X1 = 21,
+  FETCHAND4_RRR_0_OPCODE_X1 = 22,
+  FETCHAND_RRR_0_OPCODE_X1 = 23,
+  FETCHOR4_RRR_0_OPCODE_X1 = 24,
+  FETCHOR_RRR_0_OPCODE_X1 = 25,
+  FINV_UNARY_OPCODE_X1 = 3,
+  FLUSHWB_UNARY_OPCODE_X1 = 4,
+  FLUSH_UNARY_OPCODE_X1 = 5,
+  FNOP_UNARY_OPCODE_X0 = 3,
+  FNOP_UNARY_OPCODE_X1 = 6,
+  FNOP_UNARY_OPCODE_Y0 = 3,
+  FNOP_UNARY_OPCODE_Y1 = 8,
+  FSINGLE_ADD1_RRR_0_OPCODE_X0 = 34,
+  FSINGLE_ADDSUB2_RRR_0_OPCODE_X0 = 35,
+  FSINGLE_MUL1_RRR_0_OPCODE_X0 = 36,
+  FSINGLE_MUL2_RRR_0_OPCODE_X0 = 37,
+  FSINGLE_PACK1_UNARY_OPCODE_X0 = 4,
+  FSINGLE_PACK1_UNARY_OPCODE_Y0 = 4,
+  FSINGLE_PACK2_RRR_0_OPCODE_X0 = 38,
+  FSINGLE_SUB1_RRR_0_OPCODE_X0 = 39,
+  ICOH_UNARY_OPCODE_X1 = 7,
+  ILL_UNARY_OPCODE_X1 = 8,
+  ILL_UNARY_OPCODE_Y1 = 9,
+  IMM8_OPCODE_X0 = 4,
+  IMM8_OPCODE_X1 = 3,
+  INV_UNARY_OPCODE_X1 = 9,
+  IRET_UNARY_OPCODE_X1 = 10,
+  JALRP_UNARY_OPCODE_X1 = 11,
+  JALRP_UNARY_OPCODE_Y1 = 10,
+  JALR_UNARY_OPCODE_X1 = 12,
+  JALR_UNARY_OPCODE_Y1 = 11,
+  JAL_JUMP_OPCODE_X1 = 0,
+  JRP_UNARY_OPCODE_X1 = 13,
+  JRP_UNARY_OPCODE_Y1 = 12,
+  JR_UNARY_OPCODE_X1 = 14,
+  JR_UNARY_OPCODE_Y1 = 13,
+  JUMP_OPCODE_X1 = 4,
+  J_JUMP_OPCODE_X1 = 1,
+  LD1S_ADD_IMM8_OPCODE_X1 = 7,
+  LD1S_OPCODE_Y2 = 0,
+  LD1S_UNARY_OPCODE_X1 = 15,
+  LD1U_ADD_IMM8_OPCODE_X1 = 8,
+  LD1U_OPCODE_Y2 = 1,
+  LD1U_UNARY_OPCODE_X1 = 16,
+  LD2S_ADD_IMM8_OPCODE_X1 = 9,
+  LD2S_OPCODE_Y2 = 2,
+  LD2S_UNARY_OPCODE_X1 = 17,
+  LD2U_ADD_IMM8_OPCODE_X1 = 10,
+  LD2U_OPCODE_Y2 = 3,
+  LD2U_UNARY_OPCODE_X1 = 18,
+  LD4S_ADD_IMM8_OPCODE_X1 = 11,
+  LD4S_OPCODE_Y2 = 1,
+  LD4S_UNARY_OPCODE_X1 = 19,
+  LD4U_ADD_IMM8_OPCODE_X1 = 12,
+  LD4U_OPCODE_Y2 = 2,
+  LD4U_UNARY_OPCODE_X1 = 20,
+  LDNA_UNARY_OPCODE_X1 = 21,
+  LDNT1S_ADD_IMM8_OPCODE_X1 = 13,
+  LDNT1S_UNARY_OPCODE_X1 = 22,
+  LDNT1U_ADD_IMM8_OPCODE_X1 = 14,
+  LDNT1U_UNARY_OPCODE_X1 = 23,
+  LDNT2S_ADD_IMM8_OPCODE_X1 = 15,
+  LDNT2S_UNARY_OPCODE_X1 = 24,
+  LDNT2U_ADD_IMM8_OPCODE_X1 = 16,
+  LDNT2U_UNARY_OPCODE_X1 = 25,
+  LDNT4S_ADD_IMM8_OPCODE_X1 = 17,
+  LDNT4S_UNARY_OPCODE_X1 = 26,
+  LDNT4U_ADD_IMM8_OPCODE_X1 = 18,
+  LDNT4U_UNARY_OPCODE_X1 = 27,
+  LDNT_ADD_IMM8_OPCODE_X1 = 19,
+  LDNT_UNARY_OPCODE_X1 = 28,
+  LD_ADD_IMM8_OPCODE_X1 = 20,
+  LD_OPCODE_Y2 = 3,
+  LD_UNARY_OPCODE_X1 = 29,
+  LNK_UNARY_OPCODE_X1 = 30,
+  LNK_UNARY_OPCODE_Y1 = 14,
+  LWNA_ADD_IMM8_OPCODE_X1 = 21,
+  MFSPR_IMM8_OPCODE_X1 = 22,
+  MF_UNARY_OPCODE_X1 = 31,
+  MM_BF_OPCODE_X0 = 7,
+  MNZ_RRR_0_OPCODE_X0 = 40,
+  MNZ_RRR_0_OPCODE_X1 = 26,
+  MNZ_RRR_4_OPCODE_Y0 = 2,
+  MNZ_RRR_4_OPCODE_Y1 = 2,
+  MODE_OPCODE_YA2 = 1,
+  MODE_OPCODE_YB2 = 2,
+  MODE_OPCODE_YC2 = 3,
+  MTSPR_IMM8_OPCODE_X1 = 23,
+  MULAX_RRR_0_OPCODE_X0 = 41,
+  MULAX_RRR_3_OPCODE_Y0 = 2,
+  MULA_HS_HS_RRR_0_OPCODE_X0 = 42,
+  MULA_HS_HS_RRR_9_OPCODE_Y0 = 0,
+  MULA_HS_HU_RRR_0_OPCODE_X0 = 43,
+  MULA_HS_LS_RRR_0_OPCODE_X0 = 44,
+  MULA_HS_LU_RRR_0_OPCODE_X0 = 45,
+  MULA_HU_HU_RRR_0_OPCODE_X0 = 46,
+  MULA_HU_HU_RRR_9_OPCODE_Y0 = 1,
+  MULA_HU_LS_RRR_0_OPCODE_X0 = 47,
+  MULA_HU_LU_RRR_0_OPCODE_X0 = 48,
+  MULA_LS_LS_RRR_0_OPCODE_X0 = 49,
+  MULA_LS_LS_RRR_9_OPCODE_Y0 = 2,
+  MULA_LS_LU_RRR_0_OPCODE_X0 = 50,
+  MULA_LU_LU_RRR_0_OPCODE_X0 = 51,
+  MULA_LU_LU_RRR_9_OPCODE_Y0 = 3,
+  MULX_RRR_0_OPCODE_X0 = 52,
+  MULX_RRR_3_OPCODE_Y0 = 3,
+  MUL_HS_HS_RRR_0_OPCODE_X0 = 53,
+  MUL_HS_HS_RRR_8_OPCODE_Y0 = 0,
+  MUL_HS_HU_RRR_0_OPCODE_X0 = 54,
+  MUL_HS_LS_RRR_0_OPCODE_X0 = 55,
+  MUL_HS_LU_RRR_0_OPCODE_X0 = 56,
+  MUL_HU_HU_RRR_0_OPCODE_X0 = 57,
+  MUL_HU_HU_RRR_8_OPCODE_Y0 = 1,
+  MUL_HU_LS_RRR_0_OPCODE_X0 = 58,
+  MUL_HU_LU_RRR_0_OPCODE_X0 = 59,
+  MUL_LS_LS_RRR_0_OPCODE_X0 = 60,
+  MUL_LS_LS_RRR_8_OPCODE_Y0 = 2,
+  MUL_LS_LU_RRR_0_OPCODE_X0 = 61,
+  MUL_LU_LU_RRR_0_OPCODE_X0 = 62,
+  MUL_LU_LU_RRR_8_OPCODE_Y0 = 3,
+  MZ_RRR_0_OPCODE_X0 = 63,
+  MZ_RRR_0_OPCODE_X1 = 27,
+  MZ_RRR_4_OPCODE_Y0 = 3,
+  MZ_RRR_4_OPCODE_Y1 = 3,
+  NAP_UNARY_OPCODE_X1 = 32,
+  NOP_UNARY_OPCODE_X0 = 5,
+  NOP_UNARY_OPCODE_X1 = 33,
+  NOP_UNARY_OPCODE_Y0 = 5,
+  NOP_UNARY_OPCODE_Y1 = 15,
+  NOR_RRR_0_OPCODE_X0 = 64,
+  NOR_RRR_0_OPCODE_X1 = 28,
+  NOR_RRR_5_OPCODE_Y0 = 1,
+  NOR_RRR_5_OPCODE_Y1 = 1,
+  ORI_IMM8_OPCODE_X0 = 7,
+  ORI_IMM8_OPCODE_X1 = 24,
+  OR_RRR_0_OPCODE_X0 = 65,
+  OR_RRR_0_OPCODE_X1 = 29,
+  OR_RRR_5_OPCODE_Y0 = 2,
+  OR_RRR_5_OPCODE_Y1 = 2,
+  PCNT_UNARY_OPCODE_X0 = 6,
+  PCNT_UNARY_OPCODE_Y0 = 6,
+  REVBITS_UNARY_OPCODE_X0 = 7,
+  REVBITS_UNARY_OPCODE_Y0 = 7,
+  REVBYTES_UNARY_OPCODE_X0 = 8,
+  REVBYTES_UNARY_OPCODE_Y0 = 8,
+  ROTLI_SHIFT_OPCODE_X0 = 1,
+  ROTLI_SHIFT_OPCODE_X1 = 1,
+  ROTLI_SHIFT_OPCODE_Y0 = 0,
+  ROTLI_SHIFT_OPCODE_Y1 = 0,
+  ROTL_RRR_0_OPCODE_X0 = 66,
+  ROTL_RRR_0_OPCODE_X1 = 30,
+  ROTL_RRR_6_OPCODE_Y0 = 0,
+  ROTL_RRR_6_OPCODE_Y1 = 0,
+  RRR_0_OPCODE_X0 = 5,
+  RRR_0_OPCODE_X1 = 5,
+  RRR_0_OPCODE_Y0 = 5,
+  RRR_0_OPCODE_Y1 = 6,
+  RRR_1_OPCODE_Y0 = 6,
+  RRR_1_OPCODE_Y1 = 7,
+  RRR_2_OPCODE_Y0 = 7,
+  RRR_2_OPCODE_Y1 = 8,
+  RRR_3_OPCODE_Y0 = 8,
+  RRR_3_OPCODE_Y1 = 9,
+  RRR_4_OPCODE_Y0 = 9,
+  RRR_4_OPCODE_Y1 = 10,
+  RRR_5_OPCODE_Y0 = 10,
+  RRR_5_OPCODE_Y1 = 11,
+  RRR_6_OPCODE_Y0 = 11,
+  RRR_6_OPCODE_Y1 = 12,
+  RRR_7_OPCODE_Y0 = 12,
+  RRR_7_OPCODE_Y1 = 13,
+  RRR_8_OPCODE_Y0 = 13,
+  RRR_9_OPCODE_Y0 = 14,
+  SHIFT_OPCODE_X0 = 6,
+  SHIFT_OPCODE_X1 = 6,
+  SHIFT_OPCODE_Y0 = 15,
+  SHIFT_OPCODE_Y1 = 14,
+  SHL16INSLI_OPCODE_X0 = 7,
+  SHL16INSLI_OPCODE_X1 = 7,
+  SHL1ADDX_RRR_0_OPCODE_X0 = 67,
+  SHL1ADDX_RRR_0_OPCODE_X1 = 31,
+  SHL1ADDX_RRR_7_OPCODE_Y0 = 1,
+  SHL1ADDX_RRR_7_OPCODE_Y1 = 1,
+  SHL1ADD_RRR_0_OPCODE_X0 = 68,
+  SHL1ADD_RRR_0_OPCODE_X1 = 32,
+  SHL1ADD_RRR_1_OPCODE_Y0 = 0,
+  SHL1ADD_RRR_1_OPCODE_Y1 = 0,
+  SHL2ADDX_RRR_0_OPCODE_X0 = 69,
+  SHL2ADDX_RRR_0_OPCODE_X1 = 33,
+  SHL2ADDX_RRR_7_OPCODE_Y0 = 2,
+  SHL2ADDX_RRR_7_OPCODE_Y1 = 2,
+  SHL2ADD_RRR_0_OPCODE_X0 = 70,
+  SHL2ADD_RRR_0_OPCODE_X1 = 34,
+  SHL2ADD_RRR_1_OPCODE_Y0 = 1,
+  SHL2ADD_RRR_1_OPCODE_Y1 = 1,
+  SHL3ADDX_RRR_0_OPCODE_X0 = 71,
+  SHL3ADDX_RRR_0_OPCODE_X1 = 35,
+  SHL3ADDX_RRR_7_OPCODE_Y0 = 3,
+  SHL3ADDX_RRR_7_OPCODE_Y1 = 3,
+  SHL3ADD_RRR_0_OPCODE_X0 = 72,
+  SHL3ADD_RRR_0_OPCODE_X1 = 36,
+  SHL3ADD_RRR_1_OPCODE_Y0 = 2,
+  SHL3ADD_RRR_1_OPCODE_Y1 = 2,
+  SHLI_SHIFT_OPCODE_X0 = 2,
+  SHLI_SHIFT_OPCODE_X1 = 2,
+  SHLI_SHIFT_OPCODE_Y0 = 1,
+  SHLI_SHIFT_OPCODE_Y1 = 1,
+  SHLXI_SHIFT_OPCODE_X0 = 3,
+  SHLXI_SHIFT_OPCODE_X1 = 3,
+  SHLX_RRR_0_OPCODE_X0 = 73,
+  SHLX_RRR_0_OPCODE_X1 = 37,
+  SHL_RRR_0_OPCODE_X0 = 74,
+  SHL_RRR_0_OPCODE_X1 = 38,
+  SHL_RRR_6_OPCODE_Y0 = 1,
+  SHL_RRR_6_OPCODE_Y1 = 1,
+  SHRSI_SHIFT_OPCODE_X0 = 4,
+  SHRSI_SHIFT_OPCODE_X1 = 4,
+  SHRSI_SHIFT_OPCODE_Y0 = 2,
+  SHRSI_SHIFT_OPCODE_Y1 = 2,
+  SHRS_RRR_0_OPCODE_X0 = 75,
+  SHRS_RRR_0_OPCODE_X1 = 39,
+  SHRS_RRR_6_OPCODE_Y0 = 2,
+  SHRS_RRR_6_OPCODE_Y1 = 2,
+  SHRUI_SHIFT_OPCODE_X0 = 5,
+  SHRUI_SHIFT_OPCODE_X1 = 5,
+  SHRUI_SHIFT_OPCODE_Y0 = 3,
+  SHRUI_SHIFT_OPCODE_Y1 = 3,
+  SHRUXI_SHIFT_OPCODE_X0 = 6,
+  SHRUXI_SHIFT_OPCODE_X1 = 6,
+  SHRUX_RRR_0_OPCODE_X0 = 76,
+  SHRUX_RRR_0_OPCODE_X1 = 40,
+  SHRU_RRR_0_OPCODE_X0 = 77,
+  SHRU_RRR_0_OPCODE_X1 = 41,
+  SHRU_RRR_6_OPCODE_Y0 = 3,
+  SHRU_RRR_6_OPCODE_Y1 = 3,
+  SHUFFLEBYTES_RRR_0_OPCODE_X0 = 78,
+  ST1_ADD_IMM8_OPCODE_X1 = 25,
+  ST1_OPCODE_Y2 = 0,
+  ST1_RRR_0_OPCODE_X1 = 42,
+  ST2_ADD_IMM8_OPCODE_X1 = 26,
+  ST2_OPCODE_Y2 = 1,
+  ST2_RRR_0_OPCODE_X1 = 43,
+  ST4_ADD_IMM8_OPCODE_X1 = 27,
+  ST4_OPCODE_Y2 = 2,
+  ST4_RRR_0_OPCODE_X1 = 44,
+  STNT1_ADD_IMM8_OPCODE_X1 = 28,
+  STNT1_RRR_0_OPCODE_X1 = 45,
+  STNT2_ADD_IMM8_OPCODE_X1 = 29,
+  STNT2_RRR_0_OPCODE_X1 = 46,
+  STNT4_ADD_IMM8_OPCODE_X1 = 30,
+  STNT4_RRR_0_OPCODE_X1 = 47,
+  STNT_ADD_IMM8_OPCODE_X1 = 31,
+  STNT_RRR_0_OPCODE_X1 = 48,
+  ST_ADD_IMM8_OPCODE_X1 = 32,
+  ST_OPCODE_Y2 = 3,
+  ST_RRR_0_OPCODE_X1 = 49,
+  SUBXSC_RRR_0_OPCODE_X0 = 79,
+  SUBXSC_RRR_0_OPCODE_X1 = 50,
+  SUBX_RRR_0_OPCODE_X0 = 80,
+  SUBX_RRR_0_OPCODE_X1 = 51,
+  SUBX_RRR_0_OPCODE_Y0 = 2,
+  SUBX_RRR_0_OPCODE_Y1 = 2,
+  SUB_RRR_0_OPCODE_X0 = 81,
+  SUB_RRR_0_OPCODE_X1 = 52,
+  SUB_RRR_0_OPCODE_Y0 = 3,
+  SUB_RRR_0_OPCODE_Y1 = 3,
+  SWINT0_UNARY_OPCODE_X1 = 34,
+  SWINT1_UNARY_OPCODE_X1 = 35,
+  SWINT2_UNARY_OPCODE_X1 = 36,
+  SWINT3_UNARY_OPCODE_X1 = 37,
+  TBLIDXB0_UNARY_OPCODE_X0 = 9,
+  TBLIDXB0_UNARY_OPCODE_Y0 = 9,
+  TBLIDXB1_UNARY_OPCODE_X0 = 10,
+  TBLIDXB1_UNARY_OPCODE_Y0 = 10,
+  TBLIDXB2_UNARY_OPCODE_X0 = 11,
+  TBLIDXB2_UNARY_OPCODE_Y0 = 11,
+  TBLIDXB3_UNARY_OPCODE_X0 = 12,
+  TBLIDXB3_UNARY_OPCODE_Y0 = 12,
+  UNARY_RRR_0_OPCODE_X0 = 82,
+  UNARY_RRR_0_OPCODE_X1 = 53,
+  UNARY_RRR_1_OPCODE_Y0 = 3,
+  UNARY_RRR_1_OPCODE_Y1 = 3,
+  V1ADDI_IMM8_OPCODE_X0 = 8,
+  V1ADDI_IMM8_OPCODE_X1 = 33,
+  V1ADDUC_RRR_0_OPCODE_X0 = 83,
+  V1ADDUC_RRR_0_OPCODE_X1 = 54,
+  V1ADD_RRR_0_OPCODE_X0 = 84,
+  V1ADD_RRR_0_OPCODE_X1 = 55,
+  V1ADIFFU_RRR_0_OPCODE_X0 = 85,
+  V1AVGU_RRR_0_OPCODE_X0 = 86,
+  V1CMPEQI_IMM8_OPCODE_X0 = 9,
+  V1CMPEQI_IMM8_OPCODE_X1 = 34,
+  V1CMPEQ_RRR_0_OPCODE_X0 = 87,
+  V1CMPEQ_RRR_0_OPCODE_X1 = 56,
+  V1CMPLES_RRR_0_OPCODE_X0 = 88,
+  V1CMPLES_RRR_0_OPCODE_X1 = 57,
+  V1CMPLEU_RRR_0_OPCODE_X0 = 89,
+  V1CMPLEU_RRR_0_OPCODE_X1 = 58,
+  V1CMPLTSI_IMM8_OPCODE_X0 = 10,
+  V1CMPLTSI_IMM8_OPCODE_X1 = 35,
+  V1CMPLTS_RRR_0_OPCODE_X0 = 90,
+  V1CMPLTS_RRR_0_OPCODE_X1 = 59,
+  V1CMPLTUI_IMM8_OPCODE_X0 = 11,
+  V1CMPLTUI_IMM8_OPCODE_X1 = 36,
+  V1CMPLTU_RRR_0_OPCODE_X0 = 91,
+  V1CMPLTU_RRR_0_OPCODE_X1 = 60,
+  V1CMPNE_RRR_0_OPCODE_X0 = 92,
+  V1CMPNE_RRR_0_OPCODE_X1 = 61,
+  V1DDOTPUA_RRR_0_OPCODE_X0 = 161,
+  V1DDOTPUSA_RRR_0_OPCODE_X0 = 93,
+  V1DDOTPUS_RRR_0_OPCODE_X0 = 94,
+  V1DDOTPU_RRR_0_OPCODE_X0 = 162,
+  V1DOTPA_RRR_0_OPCODE_X0 = 95,
+  V1DOTPUA_RRR_0_OPCODE_X0 = 163,
+  V1DOTPUSA_RRR_0_OPCODE_X0 = 96,
+  V1DOTPUS_RRR_0_OPCODE_X0 = 97,
+  V1DOTPU_RRR_0_OPCODE_X0 = 164,
+  V1DOTP_RRR_0_OPCODE_X0 = 98,
+  V1INT_H_RRR_0_OPCODE_X0 = 99,
+  V1INT_H_RRR_0_OPCODE_X1 = 62,
+  V1INT_L_RRR_0_OPCODE_X0 = 100,
+  V1INT_L_RRR_0_OPCODE_X1 = 63,
+  V1MAXUI_IMM8_OPCODE_X0 = 12,
+  V1MAXUI_IMM8_OPCODE_X1 = 37,
+  V1MAXU_RRR_0_OPCODE_X0 = 101,
+  V1MAXU_RRR_0_OPCODE_X1 = 64,
+  V1MINUI_IMM8_OPCODE_X0 = 13,
+  V1MINUI_IMM8_OPCODE_X1 = 38,
+  V1MINU_RRR_0_OPCODE_X0 = 102,
+  V1MINU_RRR_0_OPCODE_X1 = 65,
+  V1MNZ_RRR_0_OPCODE_X0 = 103,
+  V1MNZ_RRR_0_OPCODE_X1 = 66,
+  V1MULTU_RRR_0_OPCODE_X0 = 104,
+  V1MULUS_RRR_0_OPCODE_X0 = 105,
+  V1MULU_RRR_0_OPCODE_X0 = 106,
+  V1MZ_RRR_0_OPCODE_X0 = 107,
+  V1MZ_RRR_0_OPCODE_X1 = 67,
+  V1SADAU_RRR_0_OPCODE_X0 = 108,
+  V1SADU_RRR_0_OPCODE_X0 = 109,
+  V1SHLI_SHIFT_OPCODE_X0 = 7,
+  V1SHLI_SHIFT_OPCODE_X1 = 7,
+  V1SHL_RRR_0_OPCODE_X0 = 110,
+  V1SHL_RRR_0_OPCODE_X1 = 68,
+  V1SHRSI_SHIFT_OPCODE_X0 = 8,
+  V1SHRSI_SHIFT_OPCODE_X1 = 8,
+  V1SHRS_RRR_0_OPCODE_X0 = 111,
+  V1SHRS_RRR_0_OPCODE_X1 = 69,
+  V1SHRUI_SHIFT_OPCODE_X0 = 9,
+  V1SHRUI_SHIFT_OPCODE_X1 = 9,
+  V1SHRU_RRR_0_OPCODE_X0 = 112,
+  V1SHRU_RRR_0_OPCODE_X1 = 70,
+  V1SUBUC_RRR_0_OPCODE_X0 = 113,
+  V1SUBUC_RRR_0_OPCODE_X1 = 71,
+  V1SUB_RRR_0_OPCODE_X0 = 114,
+  V1SUB_RRR_0_OPCODE_X1 = 72,
+  V2ADDI_IMM8_OPCODE_X0 = 14,
+  V2ADDI_IMM8_OPCODE_X1 = 39,
+  V2ADDSC_RRR_0_OPCODE_X0 = 115,
+  V2ADDSC_RRR_0_OPCODE_X1 = 73,
+  V2ADD_RRR_0_OPCODE_X0 = 116,
+  V2ADD_RRR_0_OPCODE_X1 = 74,
+  V2ADIFFS_RRR_0_OPCODE_X0 = 117,
+  V2AVGS_RRR_0_OPCODE_X0 = 118,
+  V2CMPEQI_IMM8_OPCODE_X0 = 15,
+  V2CMPEQI_IMM8_OPCODE_X1 = 40,
+  V2CMPEQ_RRR_0_OPCODE_X0 = 119,
+  V2CMPEQ_RRR_0_OPCODE_X1 = 75,
+  V2CMPLES_RRR_0_OPCODE_X0 = 120,
+  V2CMPLES_RRR_0_OPCODE_X1 = 76,
+  V2CMPLEU_RRR_0_OPCODE_X0 = 121,
+  V2CMPLEU_RRR_0_OPCODE_X1 = 77,
+  V2CMPLTSI_IMM8_OPCODE_X0 = 16,
+  V2CMPLTSI_IMM8_OPCODE_X1 = 41,
+  V2CMPLTS_RRR_0_OPCODE_X0 = 122,
+  V2CMPLTS_RRR_0_OPCODE_X1 = 78,
+  V2CMPLTUI_IMM8_OPCODE_X0 = 17,
+  V2CMPLTUI_IMM8_OPCODE_X1 = 42,
+  V2CMPLTU_RRR_0_OPCODE_X0 = 123,
+  V2CMPLTU_RRR_0_OPCODE_X1 = 79,
+  V2CMPNE_RRR_0_OPCODE_X0 = 124,
+  V2CMPNE_RRR_0_OPCODE_X1 = 80,
+  V2DOTPA_RRR_0_OPCODE_X0 = 125,
+  V2DOTP_RRR_0_OPCODE_X0 = 126,
+  V2INT_H_RRR_0_OPCODE_X0 = 127,
+  V2INT_H_RRR_0_OPCODE_X1 = 81,
+  V2INT_L_RRR_0_OPCODE_X0 = 128,
+  V2INT_L_RRR_0_OPCODE_X1 = 82,
+  V2MAXSI_IMM8_OPCODE_X0 = 18,
+  V2MAXSI_IMM8_OPCODE_X1 = 43,
+  V2MAXS_RRR_0_OPCODE_X0 = 129,
+  V2MAXS_RRR_0_OPCODE_X1 = 83,
+  V2MINSI_IMM8_OPCODE_X0 = 19,
+  V2MINSI_IMM8_OPCODE_X1 = 44,
+  V2MINS_RRR_0_OPCODE_X0 = 130,
+  V2MINS_RRR_0_OPCODE_X1 = 84,
+  V2MNZ_RRR_0_OPCODE_X0 = 131,
+  V2MNZ_RRR_0_OPCODE_X1 = 85,
+  V2MULFSC_RRR_0_OPCODE_X0 = 132,
+  V2MULS_RRR_0_OPCODE_X0 = 133,
+  V2MULTS_RRR_0_OPCODE_X0 = 134,
+  V2MZ_RRR_0_OPCODE_X0 = 135,
+  V2MZ_RRR_0_OPCODE_X1 = 86,
+  V2PACKH_RRR_0_OPCODE_X0 = 136,
+  V2PACKH_RRR_0_OPCODE_X1 = 87,
+  V2PACKL_RRR_0_OPCODE_X0 = 137,
+  V2PACKL_RRR_0_OPCODE_X1 = 88,
+  V2PACKUC_RRR_0_OPCODE_X0 = 138,
+  V2PACKUC_RRR_0_OPCODE_X1 = 89,
+  V2SADAS_RRR_0_OPCODE_X0 = 139,
+  V2SADAU_RRR_0_OPCODE_X0 = 140,
+  V2SADS_RRR_0_OPCODE_X0 = 141,
+  V2SADU_RRR_0_OPCODE_X0 = 142,
+  V2SHLI_SHIFT_OPCODE_X0 = 10,
+  V2SHLI_SHIFT_OPCODE_X1 = 10,
+  V2SHLSC_RRR_0_OPCODE_X0 = 143,
+  V2SHLSC_RRR_0_OPCODE_X1 = 90,
+  V2SHL_RRR_0_OPCODE_X0 = 144,
+  V2SHL_RRR_0_OPCODE_X1 = 91,
+  V2SHRSI_SHIFT_OPCODE_X0 = 11,
+  V2SHRSI_SHIFT_OPCODE_X1 = 11,
+  V2SHRS_RRR_0_OPCODE_X0 = 145,
+  V2SHRS_RRR_0_OPCODE_X1 = 92,
+  V2SHRUI_SHIFT_OPCODE_X0 = 12,
+  V2SHRUI_SHIFT_OPCODE_X1 = 12,
+  V2SHRU_RRR_0_OPCODE_X0 = 146,
+  V2SHRU_RRR_0_OPCODE_X1 = 93,
+  V2SUBSC_RRR_0_OPCODE_X0 = 147,
+  V2SUBSC_RRR_0_OPCODE_X1 = 94,
+  V2SUB_RRR_0_OPCODE_X0 = 148,
+  V2SUB_RRR_0_OPCODE_X1 = 95,
+  V4ADDSC_RRR_0_OPCODE_X0 = 149,
+  V4ADDSC_RRR_0_OPCODE_X1 = 96,
+  V4ADD_RRR_0_OPCODE_X0 = 150,
+  V4ADD_RRR_0_OPCODE_X1 = 97,
+  V4INT_H_RRR_0_OPCODE_X0 = 151,
+  V4INT_H_RRR_0_OPCODE_X1 = 98,
+  V4INT_L_RRR_0_OPCODE_X0 = 152,
+  V4INT_L_RRR_0_OPCODE_X1 = 99,
+  V4PACKSC_RRR_0_OPCODE_X0 = 153,
+  V4PACKSC_RRR_0_OPCODE_X1 = 100,
+  V4SHLSC_RRR_0_OPCODE_X0 = 154,
+  V4SHLSC_RRR_0_OPCODE_X1 = 101,
+  V4SHL_RRR_0_OPCODE_X0 = 155,
+  V4SHL_RRR_0_OPCODE_X1 = 102,
+  V4SHRS_RRR_0_OPCODE_X0 = 156,
+  V4SHRS_RRR_0_OPCODE_X1 = 103,
+  V4SHRU_RRR_0_OPCODE_X0 = 157,
+  V4SHRU_RRR_0_OPCODE_X1 = 104,
+  V4SUBSC_RRR_0_OPCODE_X0 = 158,
+  V4SUBSC_RRR_0_OPCODE_X1 = 105,
+  V4SUB_RRR_0_OPCODE_X0 = 159,
+  V4SUB_RRR_0_OPCODE_X1 = 106,
+  WH64_UNARY_OPCODE_X1 = 38,
+  XORI_IMM8_OPCODE_X0 = 20,
+  XORI_IMM8_OPCODE_X1 = 45,
+  XOR_RRR_0_OPCODE_X0 = 160,
+  XOR_RRR_0_OPCODE_X1 = 107,
+  XOR_RRR_5_OPCODE_Y0 = 3,
+  XOR_RRR_5_OPCODE_Y1 = 3
+};
+
+static __inline unsigned int
+get_BFEnd_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_BFOpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 24)) & 0xf);
+}
+
+static __inline unsigned int
+get_BFStart_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3f);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x0001ffc0);
+}
+
+static __inline unsigned int
+get_BrType_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8OpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8OpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_JumpOff_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x7ffffff);
+}
+
+static __inline unsigned int
+get_JumpOpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_MF_Imm14_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3fff);
+}
+
+static __inline unsigned int
+get_MT_Imm14_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x00003fc0);
+}
+
+static __inline unsigned int
+get_Mode(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 62)) & 0x3);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tilegx_bundle_bits n)
+{
+  return (((n >> 26)) & 0x00000001) |
+         (((unsigned int)(n >> 56)) & 0x00000002);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+  int shift = (int)(sizeof(int) * 8 - num_bits);
+  return (n << shift) >> shift;
+}
+
+static __inline tilegx_bundle_bits
+create_BFEnd_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_BFOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 24);
+}
+
+static __inline tilegx_bundle_bits
+create_BFStart_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_BrOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilegx_bundle_bits)(n & 0x0001ffc0)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_BrType_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilegx_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm16_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xffff) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm16_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8OpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 20);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8OpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xff)) << 51);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_JumpOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x7ffffff)) << 31);
+}
+
+static __inline tilegx_bundle_bits
+create_JumpOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tilegx_bundle_bits
+create_MF_Imm14_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3fff)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_MT_Imm14_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilegx_bundle_bits)(n & 0x00003fc0)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_Mode(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3)) << 62);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 28);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x7)) << 59);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 27);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xf)) << 58);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x00000001) << 26) |
+         (((tilegx_bundle_bits)(n & 0x00000002)) << 56);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3ff)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3ff)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 20);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 51);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+const struct tilegx_opcode tilegx_opcodes[336] =
+{
+ { "bpt", TILEGX_OPC_BPT, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffffffff80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a44ae00000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "info", TILEGX_OPC_INFO, 0xf, 1, TREG_ZERO, 1,
+    { { 0 }, { 1 }, { 2 }, { 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00fffULL,
+      0xfff807ff80000000ULL,
+      0x0000000078000fffULL,
+      0x3c0007ff80000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040300fffULL,
+      0x181807ff80000000ULL,
+      0x0000000010000fffULL,
+      0x0c0007ff80000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "infol", TILEGX_OPC_INFOL, 0x3, 1, TREG_ZERO, 1,
+    { { 4 }, { 5 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc000000070000fffULL,
+      0xf80007ff80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000070000fffULL,
+      0x380007ff80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld4s_tls", TILEGX_OPC_LD4S_TLS, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1858000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld_tls", TILEGX_OPC_LD_TLS, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18a0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "move", TILEGX_OPC_MOVE, 0xf, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 6, 7 }, { 10, 11 }, { 12, 13 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0xfffff80000000000ULL,
+      0x00000000780ff000ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      0x000000005107f000ULL,
+      0x283bf80000000000ULL,
+      0x00000000500bf000ULL,
+      0x2c05f80000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "movei", TILEGX_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1,
+    { { 8, 0 }, { 6, 1 }, { 10, 2 }, { 12, 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00fc0ULL,
+      0xfff807e000000000ULL,
+      0x0000000078000fc0ULL,
+      0x3c0007e000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040100fc0ULL,
+      0x180807e000000000ULL,
+      0x0000000000000fc0ULL,
+      0x040007e000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "moveli", TILEGX_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1,
+    { { 8, 4 }, { 6, 5 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc000000070000fc0ULL,
+      0xf80007e000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000010000fc0ULL,
+      0x000007e000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch", TILEGX_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a801f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x41f8000004000000ULL
+    }
+#endif
+  },
+  { "prefetch_add_l1", TILEGX_OPC_PREFETCH_ADD_L1, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8001f80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1840001f80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch_add_l1_fault", TILEGX_OPC_PREFETCH_ADD_L1_FAULT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8001f80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1838001f80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch_add_l2", TILEGX_OPC_PREFETCH_ADD_L2, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8001f80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1850001f80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch_add_l2_fault", TILEGX_OPC_PREFETCH_ADD_L2_FAULT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8001f80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1848001f80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch_add_l3", TILEGX_OPC_PREFETCH_ADD_L3, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8001f80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1860001f80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch_add_l3_fault", TILEGX_OPC_PREFETCH_ADD_L3_FAULT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8001f80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1858001f80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "prefetch_l1", TILEGX_OPC_PREFETCH_L1, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a801f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x41f8000004000000ULL
+    }
+#endif
+  },
+  { "prefetch_l1_fault", TILEGX_OPC_PREFETCH_L1_FAULT, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a781f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x41f8000000000000ULL
+    }
+#endif
+  },
+  { "prefetch_l2", TILEGX_OPC_PREFETCH_L2, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a901f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x43f8000004000000ULL
+    }
+#endif
+  },
+  { "prefetch_l2_fault", TILEGX_OPC_PREFETCH_L2_FAULT, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a881f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x43f8000000000000ULL
+    }
+#endif
+  },
+  { "prefetch_l3", TILEGX_OPC_PREFETCH_L3, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286aa01f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x83f8000000000000ULL
+    }
+#endif
+  },
+  { "prefetch_l3_fault", TILEGX_OPC_PREFETCH_L3_FAULT, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff81f80000000ULL,
+      0ULL,
+      0ULL,
+      0xc3f8000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a981f80000000ULL,
+      -1ULL,
+      -1ULL,
+      0x81f8000004000000ULL
+    }
+#endif
+  },
+  { "raise", TILEGX_OPC_RAISE, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffffffff80000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a44ae80000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "add", TILEGX_OPC_ADD, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x00000000500c0000ULL,
+      0x2806000000000000ULL,
+      0x0000000028040000ULL,
+      0x1802000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "addi", TILEGX_OPC_ADDI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0x0000000078000000ULL,
+      0x3c00000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040100000ULL,
+      0x1808000000000000ULL,
+      0ULL,
+      0x0400000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "addli", TILEGX_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 4 }, { 6, 7, 5 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc000000070000000ULL,
+      0xf800000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000010000000ULL,
+      0ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "addx", TILEGX_OPC_ADDX, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050080000ULL,
+      0x2804000000000000ULL,
+      0x0000000028000000ULL,
+      0x1800000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "addxi", TILEGX_OPC_ADDXI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0x0000000078000000ULL,
+      0x3c00000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040200000ULL,
+      0x1810000000000000ULL,
+      0x0000000008000000ULL,
+      0x0800000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "addxli", TILEGX_OPC_ADDXLI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 4 }, { 6, 7, 5 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc000000070000000ULL,
+      0xf800000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000020000000ULL,
+      0x0800000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "addxsc", TILEGX_OPC_ADDXSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050040000ULL,
+      0x2802000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "and", TILEGX_OPC_AND, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050100000ULL,
+      0x2808000000000000ULL,
+      0x0000000050000000ULL,
+      0x2c00000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "andi", TILEGX_OPC_ANDI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0x0000000078000000ULL,
+      0x3c00000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040300000ULL,
+      0x1818000000000000ULL,
+      0x0000000010000000ULL,
+      0x0c00000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "beqz", TILEGX_OPC_BEQZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1440000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "beqzt", TILEGX_OPC_BEQZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1400000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bfexts", TILEGX_OPC_BFEXTS, 0x1, 4, TREG_ZERO, 1,
+    { { 8, 9, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007f000000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000034000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bfextu", TILEGX_OPC_BFEXTU, 0x1, 4, TREG_ZERO, 1,
+    { { 8, 9, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007f000000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000035000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bfins", TILEGX_OPC_BFINS, 0x1, 4, TREG_ZERO, 1,
+    { { 23, 9, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007f000000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000036000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bgez", TILEGX_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x14c0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bgezt", TILEGX_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1480000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bgtz", TILEGX_OPC_BGTZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1540000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bgtzt", TILEGX_OPC_BGTZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1500000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "blbc", TILEGX_OPC_BLBC, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x15c0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "blbct", TILEGX_OPC_BLBCT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1580000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "blbs", TILEGX_OPC_BLBS, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1640000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "blbst", TILEGX_OPC_BLBST, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1600000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "blez", TILEGX_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x16c0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "blezt", TILEGX_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1680000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bltz", TILEGX_OPC_BLTZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1740000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bltzt", TILEGX_OPC_BLTZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1700000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bnez", TILEGX_OPC_BNEZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x17c0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "bnezt", TILEGX_OPC_BNEZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 20 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xffc0000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1780000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "clz", TILEGX_OPC_CLZ, 0x5, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 0, }, { 10, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051481000ULL,
+      -1ULL,
+      0x00000000300c1000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmoveqz", TILEGX_OPC_CMOVEQZ, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050140000ULL,
+      -1ULL,
+      0x0000000048000000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmovnez", TILEGX_OPC_CMOVNEZ, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050180000ULL,
+      -1ULL,
+      0x0000000048040000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpeq", TILEGX_OPC_CMPEQ, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x00000000501c0000ULL,
+      0x280a000000000000ULL,
+      0x0000000040000000ULL,
+      0x2404000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpeqi", TILEGX_OPC_CMPEQI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0x0000000078000000ULL,
+      0x3c00000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040400000ULL,
+      0x1820000000000000ULL,
+      0x0000000018000000ULL,
+      0x1000000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpexch", TILEGX_OPC_CMPEXCH, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x280e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpexch4", TILEGX_OPC_CMPEXCH4, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x280c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmples", TILEGX_OPC_CMPLES, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050200000ULL,
+      0x2810000000000000ULL,
+      0x0000000038000000ULL,
+      0x2000000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpleu", TILEGX_OPC_CMPLEU, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050240000ULL,
+      0x2812000000000000ULL,
+      0x0000000038040000ULL,
+      0x2002000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmplts", TILEGX_OPC_CMPLTS, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050280000ULL,
+      0x2814000000000000ULL,
+      0x0000000038080000ULL,
+      0x2004000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpltsi", TILEGX_OPC_CMPLTSI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0x0000000078000000ULL,
+      0x3c00000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000040500000ULL,
+      0x1828000000000000ULL,
+      0x0000000020000000ULL,
+      0x1400000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpltu", TILEGX_OPC_CMPLTU, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x00000000502c0000ULL,
+      0x2816000000000000ULL,
+      0x00000000380c0000ULL,
+      0x2006000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpltui", TILEGX_OPC_CMPLTUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040600000ULL,
+      0x1830000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmpne", TILEGX_OPC_CMPNE, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050300000ULL,
+      0x2818000000000000ULL,
+      0x0000000040040000ULL,
+      0x2406000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmul", TILEGX_OPC_CMUL, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000504c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmula", TILEGX_OPC_CMULA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050380000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmulaf", TILEGX_OPC_CMULAF, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050340000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmulf", TILEGX_OPC_CMULF, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050400000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmulfr", TILEGX_OPC_CMULFR, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000503c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmulh", TILEGX_OPC_CMULH, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050480000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "cmulhr", TILEGX_OPC_CMULHR, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050440000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "crc32_32", TILEGX_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050500000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "crc32_8", TILEGX_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050540000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ctz", TILEGX_OPC_CTZ, 0x5, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 0, }, { 10, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051482000ULL,
+      -1ULL,
+      0x00000000300c2000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "dblalign", TILEGX_OPC_DBLALIGN, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050640000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "dblalign2", TILEGX_OPC_DBLALIGN2, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050580000ULL,
+      0x281a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "dblalign4", TILEGX_OPC_DBLALIGN4, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000505c0000ULL,
+      0x281c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "dblalign6", TILEGX_OPC_DBLALIGN6, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050600000ULL,
+      0x281e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "drain", TILEGX_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a080000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "dtlbpr", TILEGX_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a100000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "exch", TILEGX_OPC_EXCH, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2822000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "exch4", TILEGX_OPC_EXCH4, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2820000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_add_flags", TILEGX_OPC_FDOUBLE_ADD_FLAGS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000506c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_addsub", TILEGX_OPC_FDOUBLE_ADDSUB, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050680000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_mul_flags", TILEGX_OPC_FDOUBLE_MUL_FLAGS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050700000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_pack1", TILEGX_OPC_FDOUBLE_PACK1, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050740000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_pack2", TILEGX_OPC_FDOUBLE_PACK2, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050780000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_sub_flags", TILEGX_OPC_FDOUBLE_SUB_FLAGS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000507c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_unpack_max", TILEGX_OPC_FDOUBLE_UNPACK_MAX, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050800000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fdouble_unpack_min", TILEGX_OPC_FDOUBLE_UNPACK_MIN, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050840000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchadd", TILEGX_OPC_FETCHADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x282a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchadd4", TILEGX_OPC_FETCHADD4, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2824000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchaddgez", TILEGX_OPC_FETCHADDGEZ, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2828000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchaddgez4", TILEGX_OPC_FETCHADDGEZ4, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2826000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchand", TILEGX_OPC_FETCHAND, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x282e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchand4", TILEGX_OPC_FETCHAND4, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x282c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchor", TILEGX_OPC_FETCHOR, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2832000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fetchor4", TILEGX_OPC_FETCHOR4, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2830000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "finv", TILEGX_OPC_FINV, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a180000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "flush", TILEGX_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a280000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "flushwb", TILEGX_OPC_FLUSHWB, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a200000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fnop", TILEGX_OPC_FNOP, 0xf, 0, TREG_ZERO, 1,
+    { {  }, {  }, {  }, {  }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0xfffff80000000000ULL,
+      0x00000000780ff000ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051483000ULL,
+      0x286a300000000000ULL,
+      0x00000000300c3000ULL,
+      0x1c06400000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_add1", TILEGX_OPC_FSINGLE_ADD1, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050880000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_addsub2", TILEGX_OPC_FSINGLE_ADDSUB2, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000508c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_mul1", TILEGX_OPC_FSINGLE_MUL1, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050900000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_mul2", TILEGX_OPC_FSINGLE_MUL2, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050940000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_pack1", TILEGX_OPC_FSINGLE_PACK1, 0x5, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 0, }, { 10, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051484000ULL,
+      -1ULL,
+      0x00000000300c4000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_pack2", TILEGX_OPC_FSINGLE_PACK2, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050980000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "fsingle_sub1", TILEGX_OPC_FSINGLE_SUB1, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000509c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "icoh", TILEGX_OPC_ICOH, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a380000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ill", TILEGX_OPC_ILL, 0xa, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, {  }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a400000000000ULL,
+      -1ULL,
+      0x1c06480000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "inv", TILEGX_OPC_INV, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a480000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "iret", TILEGX_OPC_IRET, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a500000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "j", TILEGX_OPC_J, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 25 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfc00000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2400000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "jal", TILEGX_OPC_JAL, 0x2, 1, TREG_LR, 1,
+    { { 0, }, { 25 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfc00000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2000000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "jalr", TILEGX_OPC_JALR, 0xa, 1, TREG_LR, 1,
+    { { 0, }, { 7 }, { 0, }, { 13 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a600000000000ULL,
+      -1ULL,
+      0x1c06580000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "jalrp", TILEGX_OPC_JALRP, 0xa, 1, TREG_LR, 1,
+    { { 0, }, { 7 }, { 0, }, { 13 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a580000000000ULL,
+      -1ULL,
+      0x1c06500000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "jr", TILEGX_OPC_JR, 0xa, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 13 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a700000000000ULL,
+      -1ULL,
+      0x1c06680000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "jrp", TILEGX_OPC_JRP, 0xa, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 13 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286a680000000000ULL,
+      -1ULL,
+      0x1c06600000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld", TILEGX_OPC_LD, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286ae80000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x8200000004000000ULL
+    }
+#endif
+  },
+  { "ld1s", TILEGX_OPC_LD1S, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a780000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x4000000000000000ULL
+    }
+#endif
+  },
+  { "ld1s_add", TILEGX_OPC_LD1S_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1838000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld1u", TILEGX_OPC_LD1U, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a800000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x4000000004000000ULL
+    }
+#endif
+  },
+  { "ld1u_add", TILEGX_OPC_LD1U_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1840000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld2s", TILEGX_OPC_LD2S, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a880000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x4200000000000000ULL
+    }
+#endif
+  },
+  { "ld2s_add", TILEGX_OPC_LD2S_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1848000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld2u", TILEGX_OPC_LD2U, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a900000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x4200000004000000ULL
+    }
+#endif
+  },
+  { "ld2u_add", TILEGX_OPC_LD2U_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1850000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld4s", TILEGX_OPC_LD4S, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286a980000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x8000000004000000ULL
+    }
+#endif
+  },
+  { "ld4s_add", TILEGX_OPC_LD4S_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1858000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld4u", TILEGX_OPC_LD4U, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 26, 14 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x286aa00000000000ULL,
+      -1ULL,
+      -1ULL,
+      0x8200000000000000ULL
+    }
+#endif
+  },
+  { "ld4u_add", TILEGX_OPC_LD4U_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1860000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ld_add", TILEGX_OPC_LD_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18a0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldna", TILEGX_OPC_LDNA, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286aa80000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldna_add", TILEGX_OPC_LDNA_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18a8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt", TILEGX_OPC_LDNT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ae00000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt1s", TILEGX_OPC_LDNT1S, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ab00000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt1s_add", TILEGX_OPC_LDNT1S_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1868000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt1u", TILEGX_OPC_LDNT1U, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ab80000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt1u_add", TILEGX_OPC_LDNT1U_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1870000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt2s", TILEGX_OPC_LDNT2S, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ac00000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt2s_add", TILEGX_OPC_LDNT2S_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1878000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt2u", TILEGX_OPC_LDNT2U, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ac80000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt2u_add", TILEGX_OPC_LDNT2U_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1880000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt4s", TILEGX_OPC_LDNT4S, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ad00000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt4s_add", TILEGX_OPC_LDNT4S_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1888000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt4u", TILEGX_OPC_LDNT4U, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286ad80000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt4u_add", TILEGX_OPC_LDNT4U_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1890000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ldnt_add", TILEGX_OPC_LDNT_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 6, 15, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1898000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "lnk", TILEGX_OPC_LNK, 0xa, 1, TREG_ZERO, 1,
+    { { 0, }, { 6 }, { 0, }, { 12 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286af00000000000ULL,
+      -1ULL,
+      0x1c06700000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mf", TILEGX_OPC_MF, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286af80000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mfspr", TILEGX_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 6, 27 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18b0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mm", TILEGX_OPC_MM, 0x1, 4, TREG_ZERO, 1,
+    { { 23, 9, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007f000000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000037000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mnz", TILEGX_OPC_MNZ, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050a00000ULL,
+      0x2834000000000000ULL,
+      0x0000000048080000ULL,
+      0x2804000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mtspr", TILEGX_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 28, 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18b8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hs_hs", TILEGX_OPC_MUL_HS_HS, 0x5, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050d40000ULL,
+      -1ULL,
+      0x0000000068000000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hs_hu", TILEGX_OPC_MUL_HS_HU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050d80000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hs_ls", TILEGX_OPC_MUL_HS_LS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050dc0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hs_lu", TILEGX_OPC_MUL_HS_LU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050e00000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hu_hu", TILEGX_OPC_MUL_HU_HU, 0x5, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050e40000ULL,
+      -1ULL,
+      0x0000000068040000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hu_ls", TILEGX_OPC_MUL_HU_LS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050e80000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_hu_lu", TILEGX_OPC_MUL_HU_LU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050ec0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_ls_ls", TILEGX_OPC_MUL_LS_LS, 0x5, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050f00000ULL,
+      -1ULL,
+      0x0000000068080000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_ls_lu", TILEGX_OPC_MUL_LS_LU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050f40000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mul_lu_lu", TILEGX_OPC_MUL_LU_LU, 0x5, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050f80000ULL,
+      -1ULL,
+      0x00000000680c0000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hs_hs", TILEGX_OPC_MULA_HS_HS, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050a80000ULL,
+      -1ULL,
+      0x0000000070000000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hs_hu", TILEGX_OPC_MULA_HS_HU, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050ac0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hs_ls", TILEGX_OPC_MULA_HS_LS, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050b00000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hs_lu", TILEGX_OPC_MULA_HS_LU, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050b40000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hu_hu", TILEGX_OPC_MULA_HU_HU, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050b80000ULL,
+      -1ULL,
+      0x0000000070040000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hu_ls", TILEGX_OPC_MULA_HU_LS, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050bc0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_hu_lu", TILEGX_OPC_MULA_HU_LU, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050c00000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_ls_ls", TILEGX_OPC_MULA_LS_LS, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050c40000ULL,
+      -1ULL,
+      0x0000000070080000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_ls_lu", TILEGX_OPC_MULA_LS_LU, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050c80000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mula_lu_lu", TILEGX_OPC_MULA_LU_LU, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050cc0000ULL,
+      -1ULL,
+      0x00000000700c0000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mulax", TILEGX_OPC_MULAX, 0x5, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050a40000ULL,
+      -1ULL,
+      0x0000000040080000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mulx", TILEGX_OPC_MULX, 0x5, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0x00000000780c0000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000050d00000ULL,
+      -1ULL,
+      0x00000000400c0000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "mz", TILEGX_OPC_MZ, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000050fc0000ULL,
+      0x2836000000000000ULL,
+      0x00000000480c0000ULL,
+      0x2806000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "nap", TILEGX_OPC_NAP, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286b000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "nop", TILEGX_OPC_NOP, 0xf, 0, TREG_ZERO, 1,
+    { {  }, {  }, {  }, {  }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0xfffff80000000000ULL,
+      0x00000000780ff000ULL,
+      0x3c07f80000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051485000ULL,
+      0x286b080000000000ULL,
+      0x00000000300c5000ULL,
+      0x1c06780000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "nor", TILEGX_OPC_NOR, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051000000ULL,
+      0x2838000000000000ULL,
+      0x0000000050040000ULL,
+      0x2c02000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "or", TILEGX_OPC_OR, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051040000ULL,
+      0x283a000000000000ULL,
+      0x0000000050080000ULL,
+      0x2c04000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "ori", TILEGX_OPC_ORI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040700000ULL,
+      0x18c0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "pcnt", TILEGX_OPC_PCNT, 0x5, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 0, }, { 10, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051486000ULL,
+      -1ULL,
+      0x00000000300c6000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "revbits", TILEGX_OPC_REVBITS, 0x5, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 0, }, { 10, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051487000ULL,
+      -1ULL,
+      0x00000000300c7000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "revbytes", TILEGX_OPC_REVBYTES, 0x5, 2, TREG_ZERO, 1,
+    { { 8, 9 }, { 0, }, { 10, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051488000ULL,
+      -1ULL,
+      0x00000000300c8000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "rotl", TILEGX_OPC_ROTL, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051080000ULL,
+      0x283c000000000000ULL,
+      0x0000000058000000ULL,
+      0x3000000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "rotli", TILEGX_OPC_ROTLI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000060040000ULL,
+      0x3002000000000000ULL,
+      0x0000000078000000ULL,
+      0x3800000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl", TILEGX_OPC_SHL, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051280000ULL,
+      0x284c000000000000ULL,
+      0x0000000058040000ULL,
+      0x3002000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl16insli", TILEGX_OPC_SHL16INSLI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 4 }, { 6, 7, 5 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc000000070000000ULL,
+      0xf800000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000070000000ULL,
+      0x3800000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl1add", TILEGX_OPC_SHL1ADD, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051100000ULL,
+      0x2840000000000000ULL,
+      0x0000000030000000ULL,
+      0x1c00000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl1addx", TILEGX_OPC_SHL1ADDX, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x00000000510c0000ULL,
+      0x283e000000000000ULL,
+      0x0000000060040000ULL,
+      0x3402000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl2add", TILEGX_OPC_SHL2ADD, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051180000ULL,
+      0x2844000000000000ULL,
+      0x0000000030040000ULL,
+      0x1c02000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl2addx", TILEGX_OPC_SHL2ADDX, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051140000ULL,
+      0x2842000000000000ULL,
+      0x0000000060080000ULL,
+      0x3404000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl3add", TILEGX_OPC_SHL3ADD, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051200000ULL,
+      0x2848000000000000ULL,
+      0x0000000030080000ULL,
+      0x1c04000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shl3addx", TILEGX_OPC_SHL3ADDX, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x00000000511c0000ULL,
+      0x2846000000000000ULL,
+      0x00000000600c0000ULL,
+      0x3406000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shli", TILEGX_OPC_SHLI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000060080000ULL,
+      0x3004000000000000ULL,
+      0x0000000078040000ULL,
+      0x3802000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shlx", TILEGX_OPC_SHLX, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051240000ULL,
+      0x284a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shlxi", TILEGX_OPC_SHLXI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000600c0000ULL,
+      0x3006000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shrs", TILEGX_OPC_SHRS, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x00000000512c0000ULL,
+      0x284e000000000000ULL,
+      0x0000000058080000ULL,
+      0x3004000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shrsi", TILEGX_OPC_SHRSI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000060100000ULL,
+      0x3008000000000000ULL,
+      0x0000000078080000ULL,
+      0x3804000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shru", TILEGX_OPC_SHRU, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051340000ULL,
+      0x2852000000000000ULL,
+      0x00000000580c0000ULL,
+      0x3006000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shrui", TILEGX_OPC_SHRUI, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000060140000ULL,
+      0x300a000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3806000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shrux", TILEGX_OPC_SHRUX, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051300000ULL,
+      0x2850000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shruxi", TILEGX_OPC_SHRUXI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000060180000ULL,
+      0x300c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "shufflebytes", TILEGX_OPC_SHUFFLEBYTES, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051380000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "st", TILEGX_OPC_ST, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 14, 33 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x2862000000000000ULL,
+      -1ULL,
+      -1ULL,
+      0xc200000004000000ULL
+    }
+#endif
+  },
+  { "st1", TILEGX_OPC_ST1, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 14, 33 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x2854000000000000ULL,
+      -1ULL,
+      -1ULL,
+      0xc000000000000000ULL
+    }
+#endif
+  },
+  { "st1_add", TILEGX_OPC_ST1_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18c8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "st2", TILEGX_OPC_ST2, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 14, 33 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x2856000000000000ULL,
+      -1ULL,
+      -1ULL,
+      0xc000000004000000ULL
+    }
+#endif
+  },
+  { "st2_add", TILEGX_OPC_ST2_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18d0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "st4", TILEGX_OPC_ST4, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 14, 33 } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0xc200000004000000ULL
+    },
+    {
+      -1ULL,
+      0x2858000000000000ULL,
+      -1ULL,
+      -1ULL,
+      0xc200000000000000ULL
+    }
+#endif
+  },
+  { "st4_add", TILEGX_OPC_ST4_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18d8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "st_add", TILEGX_OPC_ST_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x1900000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt", TILEGX_OPC_STNT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x2860000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt1", TILEGX_OPC_STNT1, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x285a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt1_add", TILEGX_OPC_STNT1_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18e0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt2", TILEGX_OPC_STNT2, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x285c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt2_add", TILEGX_OPC_STNT2_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18e8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt4", TILEGX_OPC_STNT4, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x285e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt4_add", TILEGX_OPC_STNT4_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18f0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "stnt_add", TILEGX_OPC_STNT_ADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x18f8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "sub", TILEGX_OPC_SUB, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051440000ULL,
+      0x2868000000000000ULL,
+      0x00000000280c0000ULL,
+      0x1806000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "subx", TILEGX_OPC_SUBX, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000051400000ULL,
+      0x2866000000000000ULL,
+      0x0000000028080000ULL,
+      0x1804000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "subxsc", TILEGX_OPC_SUBXSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000513c0000ULL,
+      0x2864000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "swint0", TILEGX_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286b100000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "swint1", TILEGX_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286b180000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "swint2", TILEGX_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286b200000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "swint3", TILEGX_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286b280000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "tblidxb0", TILEGX_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1,
+    { { 23, 9 }, { 0, }, { 24, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051489000ULL,
+      -1ULL,
+      0x00000000300c9000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "tblidxb1", TILEGX_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1,
+    { { 23, 9 }, { 0, }, { 24, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x000000005148a000ULL,
+      -1ULL,
+      0x00000000300ca000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "tblidxb2", TILEGX_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1,
+    { { 23, 9 }, { 0, }, { 24, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x000000005148b000ULL,
+      -1ULL,
+      0x00000000300cb000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "tblidxb3", TILEGX_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1,
+    { { 23, 9 }, { 0, }, { 24, 11 }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffff000ULL,
+      0ULL,
+      0x00000000780ff000ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x000000005148c000ULL,
+      -1ULL,
+      0x00000000300cc000ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1add", TILEGX_OPC_V1ADD, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051500000ULL,
+      0x286e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1addi", TILEGX_OPC_V1ADDI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040800000ULL,
+      0x1908000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1adduc", TILEGX_OPC_V1ADDUC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000514c0000ULL,
+      0x286c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1adiffu", TILEGX_OPC_V1ADIFFU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051540000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1avgu", TILEGX_OPC_V1AVGU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051580000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpeq", TILEGX_OPC_V1CMPEQ, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000515c0000ULL,
+      0x2870000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpeqi", TILEGX_OPC_V1CMPEQI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040900000ULL,
+      0x1910000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmples", TILEGX_OPC_V1CMPLES, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051600000ULL,
+      0x2872000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpleu", TILEGX_OPC_V1CMPLEU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051640000ULL,
+      0x2874000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmplts", TILEGX_OPC_V1CMPLTS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051680000ULL,
+      0x2876000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpltsi", TILEGX_OPC_V1CMPLTSI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040a00000ULL,
+      0x1918000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpltu", TILEGX_OPC_V1CMPLTU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000516c0000ULL,
+      0x2878000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpltui", TILEGX_OPC_V1CMPLTUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040b00000ULL,
+      0x1920000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1cmpne", TILEGX_OPC_V1CMPNE, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051700000ULL,
+      0x287a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1ddotpu", TILEGX_OPC_V1DDOTPU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052880000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1ddotpua", TILEGX_OPC_V1DDOTPUA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052840000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1ddotpus", TILEGX_OPC_V1DDOTPUS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051780000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1ddotpusa", TILEGX_OPC_V1DDOTPUSA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051740000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1dotp", TILEGX_OPC_V1DOTP, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051880000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1dotpa", TILEGX_OPC_V1DOTPA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000517c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1dotpu", TILEGX_OPC_V1DOTPU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052900000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1dotpua", TILEGX_OPC_V1DOTPUA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000528c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1dotpus", TILEGX_OPC_V1DOTPUS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051840000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1dotpusa", TILEGX_OPC_V1DOTPUSA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051800000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1int_h", TILEGX_OPC_V1INT_H, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000518c0000ULL,
+      0x287c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1int_l", TILEGX_OPC_V1INT_L, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051900000ULL,
+      0x287e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1maxu", TILEGX_OPC_V1MAXU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051940000ULL,
+      0x2880000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1maxui", TILEGX_OPC_V1MAXUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040c00000ULL,
+      0x1928000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1minu", TILEGX_OPC_V1MINU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051980000ULL,
+      0x2882000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1minui", TILEGX_OPC_V1MINUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040d00000ULL,
+      0x1930000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1mnz", TILEGX_OPC_V1MNZ, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000519c0000ULL,
+      0x2884000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1multu", TILEGX_OPC_V1MULTU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051a00000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1mulu", TILEGX_OPC_V1MULU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051a80000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1mulus", TILEGX_OPC_V1MULUS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051a40000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1mz", TILEGX_OPC_V1MZ, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051ac0000ULL,
+      0x2886000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1sadau", TILEGX_OPC_V1SADAU, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051b00000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1sadu", TILEGX_OPC_V1SADU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051b40000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1shl", TILEGX_OPC_V1SHL, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051b80000ULL,
+      0x2888000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1shli", TILEGX_OPC_V1SHLI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000601c0000ULL,
+      0x300e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1shrs", TILEGX_OPC_V1SHRS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051bc0000ULL,
+      0x288a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1shrsi", TILEGX_OPC_V1SHRSI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000060200000ULL,
+      0x3010000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1shru", TILEGX_OPC_V1SHRU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051c00000ULL,
+      0x288c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1shrui", TILEGX_OPC_V1SHRUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000060240000ULL,
+      0x3012000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1sub", TILEGX_OPC_V1SUB, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051c80000ULL,
+      0x2890000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v1subuc", TILEGX_OPC_V1SUBUC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051c40000ULL,
+      0x288e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2add", TILEGX_OPC_V2ADD, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051d00000ULL,
+      0x2894000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2addi", TILEGX_OPC_V2ADDI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040e00000ULL,
+      0x1938000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2addsc", TILEGX_OPC_V2ADDSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051cc0000ULL,
+      0x2892000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2adiffs", TILEGX_OPC_V2ADIFFS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051d40000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2avgs", TILEGX_OPC_V2AVGS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051d80000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpeq", TILEGX_OPC_V2CMPEQ, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051dc0000ULL,
+      0x2896000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpeqi", TILEGX_OPC_V2CMPEQI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000040f00000ULL,
+      0x1940000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmples", TILEGX_OPC_V2CMPLES, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051e00000ULL,
+      0x2898000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpleu", TILEGX_OPC_V2CMPLEU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051e40000ULL,
+      0x289a000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmplts", TILEGX_OPC_V2CMPLTS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051e80000ULL,
+      0x289c000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpltsi", TILEGX_OPC_V2CMPLTSI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000041000000ULL,
+      0x1948000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpltu", TILEGX_OPC_V2CMPLTU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051ec0000ULL,
+      0x289e000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpltui", TILEGX_OPC_V2CMPLTUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000041100000ULL,
+      0x1950000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2cmpne", TILEGX_OPC_V2CMPNE, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051f00000ULL,
+      0x28a0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2dotp", TILEGX_OPC_V2DOTP, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051f80000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2dotpa", TILEGX_OPC_V2DOTPA, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051f40000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2int_h", TILEGX_OPC_V2INT_H, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000051fc0000ULL,
+      0x28a2000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2int_l", TILEGX_OPC_V2INT_L, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052000000ULL,
+      0x28a4000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2maxs", TILEGX_OPC_V2MAXS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052040000ULL,
+      0x28a6000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2maxsi", TILEGX_OPC_V2MAXSI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000041200000ULL,
+      0x1958000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2mins", TILEGX_OPC_V2MINS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052080000ULL,
+      0x28a8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2minsi", TILEGX_OPC_V2MINSI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000041300000ULL,
+      0x1960000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2mnz", TILEGX_OPC_V2MNZ, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000520c0000ULL,
+      0x28aa000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2mulfsc", TILEGX_OPC_V2MULFSC, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052100000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2muls", TILEGX_OPC_V2MULS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052140000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2mults", TILEGX_OPC_V2MULTS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052180000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2mz", TILEGX_OPC_V2MZ, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000521c0000ULL,
+      0x28ac000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2packh", TILEGX_OPC_V2PACKH, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052200000ULL,
+      0x28ae000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2packl", TILEGX_OPC_V2PACKL, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052240000ULL,
+      0x28b0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2packuc", TILEGX_OPC_V2PACKUC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052280000ULL,
+      0x28b2000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2sadas", TILEGX_OPC_V2SADAS, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000522c0000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2sadau", TILEGX_OPC_V2SADAU, 0x1, 3, TREG_ZERO, 1,
+    { { 23, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052300000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2sads", TILEGX_OPC_V2SADS, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052340000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2sadu", TILEGX_OPC_V2SADU, 0x1, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052380000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shl", TILEGX_OPC_V2SHL, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052400000ULL,
+      0x28b6000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shli", TILEGX_OPC_V2SHLI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000060280000ULL,
+      0x3014000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shlsc", TILEGX_OPC_V2SHLSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000523c0000ULL,
+      0x28b4000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shrs", TILEGX_OPC_V2SHRS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052440000ULL,
+      0x28b8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shrsi", TILEGX_OPC_V2SHRSI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000602c0000ULL,
+      0x3016000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shru", TILEGX_OPC_V2SHRU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052480000ULL,
+      0x28ba000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2shrui", TILEGX_OPC_V2SHRUI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 29 }, { 6, 7, 30 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000060300000ULL,
+      0x3018000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2sub", TILEGX_OPC_V2SUB, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052500000ULL,
+      0x28be000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v2subsc", TILEGX_OPC_V2SUBSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000524c0000ULL,
+      0x28bc000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4add", TILEGX_OPC_V4ADD, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052580000ULL,
+      0x28c2000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4addsc", TILEGX_OPC_V4ADDSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052540000ULL,
+      0x28c0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4int_h", TILEGX_OPC_V4INT_H, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000525c0000ULL,
+      0x28c4000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4int_l", TILEGX_OPC_V4INT_L, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052600000ULL,
+      0x28c6000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4packsc", TILEGX_OPC_V4PACKSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052640000ULL,
+      0x28c8000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4shl", TILEGX_OPC_V4SHL, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000526c0000ULL,
+      0x28cc000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4shlsc", TILEGX_OPC_V4SHLSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052680000ULL,
+      0x28ca000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4shrs", TILEGX_OPC_V4SHRS, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052700000ULL,
+      0x28ce000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4shru", TILEGX_OPC_V4SHRU, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052740000ULL,
+      0x28d0000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4sub", TILEGX_OPC_V4SUB, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x00000000527c0000ULL,
+      0x28d4000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "v4subsc", TILEGX_OPC_V4SUBSC, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000052780000ULL,
+      0x28d2000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "wh64", TILEGX_OPC_WH64, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 7 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0ULL,
+      0xfffff80000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      -1ULL,
+      0x286b300000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "xor", TILEGX_OPC_XOR, 0xf, 3, TREG_ZERO, 1,
+    { { 8, 9, 16 }, { 6, 7, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ffc0000ULL,
+      0xfffe000000000000ULL,
+      0x00000000780c0000ULL,
+      0x3c06000000000000ULL,
+      0ULL
+    },
+    {
+      0x0000000052800000ULL,
+      0x28d6000000000000ULL,
+      0x00000000500c0000ULL,
+      0x2c06000000000000ULL,
+      -1ULL
+    }
+#endif
+  },
+  { "xori", TILEGX_OPC_XORI, 0x3, 3, TREG_ZERO, 1,
+    { { 8, 9, 0 }, { 6, 7, 1 }, { 0, }, { 0, }, { 0, } },
+#ifndef DISASM_ONLY
+    {
+      0xc00000007ff00000ULL,
+      0xfff8000000000000ULL,
+      0ULL,
+      0ULL,
+      0ULL
+    },
+    {
+      0x0000000041400000ULL,
+      0x1968000000000000ULL,
+      -1ULL,
+      -1ULL,
+      -1ULL
+    }
+#endif
+  },
+  { NULL, TILEGX_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } },
+#ifndef DISASM_ONLY
+    { 0, }, { 0, }
+#endif
+  }
+};
+
+#define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6))
+#define CHILD(array_index) (TILEGX_OPC_NONE + (array_index))
+
+static const unsigned short decode_X0_fsm[936] =
+{
+  BITFIELD(22, 9) /* index 0 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_BFEXTS,
+  TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTU,
+  TILEGX_OPC_BFEXTU, TILEGX_OPC_BFEXTU, TILEGX_OPC_BFEXTU, TILEGX_OPC_BFINS,
+  TILEGX_OPC_BFINS, TILEGX_OPC_BFINS, TILEGX_OPC_BFINS, TILEGX_OPC_MM,
+  TILEGX_OPC_MM, TILEGX_OPC_MM, TILEGX_OPC_MM, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(528), CHILD(578),
+  CHILD(583), CHILD(588), CHILD(593), CHILD(598), TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, CHILD(603), CHILD(620), CHILD(637), CHILD(654), CHILD(671),
+  CHILD(703), CHILD(797), CHILD(814), CHILD(831), CHILD(848), CHILD(865),
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, CHILD(889), TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906),
+  BITFIELD(6, 2) /* index 513 */,
+  TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(518),
+  BITFIELD(8, 2) /* index 518 */,
+  TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(523),
+  BITFIELD(10, 2) /* index 523 */,
+  TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_MOVELI,
+  BITFIELD(20, 2) /* index 528 */,
+  TILEGX_OPC_NONE, CHILD(533), TILEGX_OPC_ADDXI, CHILD(548),
+  BITFIELD(6, 2) /* index 533 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(538),
+  BITFIELD(8, 2) /* index 538 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(543),
+  BITFIELD(10, 2) /* index 543 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI,
+  BITFIELD(0, 2) /* index 548 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(553),
+  BITFIELD(2, 2) /* index 553 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(558),
+  BITFIELD(4, 2) /* index 558 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(563),
+  BITFIELD(6, 2) /* index 563 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(568),
+  BITFIELD(8, 2) /* index 568 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(573),
+  BITFIELD(10, 2) /* index 573 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO,
+  BITFIELD(20, 2) /* index 578 */,
+  TILEGX_OPC_CMPEQI, TILEGX_OPC_CMPLTSI, TILEGX_OPC_CMPLTUI, TILEGX_OPC_ORI,
+  BITFIELD(20, 2) /* index 583 */,
+  TILEGX_OPC_V1ADDI, TILEGX_OPC_V1CMPEQI, TILEGX_OPC_V1CMPLTSI,
+  TILEGX_OPC_V1CMPLTUI,
+  BITFIELD(20, 2) /* index 588 */,
+  TILEGX_OPC_V1MAXUI, TILEGX_OPC_V1MINUI, TILEGX_OPC_V2ADDI,
+  TILEGX_OPC_V2CMPEQI,
+  BITFIELD(20, 2) /* index 593 */,
+  TILEGX_OPC_V2CMPLTSI, TILEGX_OPC_V2CMPLTUI, TILEGX_OPC_V2MAXSI,
+  TILEGX_OPC_V2MINSI,
+  BITFIELD(20, 2) /* index 598 */,
+  TILEGX_OPC_XORI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(18, 4) /* index 603 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_ADDXSC, TILEGX_OPC_ADDX, TILEGX_OPC_ADD,
+  TILEGX_OPC_AND, TILEGX_OPC_CMOVEQZ, TILEGX_OPC_CMOVNEZ, TILEGX_OPC_CMPEQ,
+  TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU,
+  TILEGX_OPC_CMPNE, TILEGX_OPC_CMULAF, TILEGX_OPC_CMULA, TILEGX_OPC_CMULFR,
+  BITFIELD(18, 4) /* index 620 */,
+  TILEGX_OPC_CMULF, TILEGX_OPC_CMULHR, TILEGX_OPC_CMULH, TILEGX_OPC_CMUL,
+  TILEGX_OPC_CRC32_32, TILEGX_OPC_CRC32_8, TILEGX_OPC_DBLALIGN2,
+  TILEGX_OPC_DBLALIGN4, TILEGX_OPC_DBLALIGN6, TILEGX_OPC_DBLALIGN,
+  TILEGX_OPC_FDOUBLE_ADDSUB, TILEGX_OPC_FDOUBLE_ADD_FLAGS,
+  TILEGX_OPC_FDOUBLE_MUL_FLAGS, TILEGX_OPC_FDOUBLE_PACK1,
+  TILEGX_OPC_FDOUBLE_PACK2, TILEGX_OPC_FDOUBLE_SUB_FLAGS,
+  BITFIELD(18, 4) /* index 637 */,
+  TILEGX_OPC_FDOUBLE_UNPACK_MAX, TILEGX_OPC_FDOUBLE_UNPACK_MIN,
+  TILEGX_OPC_FSINGLE_ADD1, TILEGX_OPC_FSINGLE_ADDSUB2,
+  TILEGX_OPC_FSINGLE_MUL1, TILEGX_OPC_FSINGLE_MUL2, TILEGX_OPC_FSINGLE_PACK2,
+  TILEGX_OPC_FSINGLE_SUB1, TILEGX_OPC_MNZ, TILEGX_OPC_MULAX,
+  TILEGX_OPC_MULA_HS_HS, TILEGX_OPC_MULA_HS_HU, TILEGX_OPC_MULA_HS_LS,
+  TILEGX_OPC_MULA_HS_LU, TILEGX_OPC_MULA_HU_HU, TILEGX_OPC_MULA_HU_LS,
+  BITFIELD(18, 4) /* index 654 */,
+  TILEGX_OPC_MULA_HU_LU, TILEGX_OPC_MULA_LS_LS, TILEGX_OPC_MULA_LS_LU,
+  TILEGX_OPC_MULA_LU_LU, TILEGX_OPC_MULX, TILEGX_OPC_MUL_HS_HS,
+  TILEGX_OPC_MUL_HS_HU, TILEGX_OPC_MUL_HS_LS, TILEGX_OPC_MUL_HS_LU,
+  TILEGX_OPC_MUL_HU_HU, TILEGX_OPC_MUL_HU_LS, TILEGX_OPC_MUL_HU_LU,
+  TILEGX_OPC_MUL_LS_LS, TILEGX_OPC_MUL_LS_LU, TILEGX_OPC_MUL_LU_LU,
+  TILEGX_OPC_MZ,
+  BITFIELD(18, 4) /* index 671 */,
+  TILEGX_OPC_NOR, CHILD(688), TILEGX_OPC_ROTL, TILEGX_OPC_SHL1ADDX,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADDX, TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL3ADDX, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHLX, TILEGX_OPC_SHL,
+  TILEGX_OPC_SHRS, TILEGX_OPC_SHRUX, TILEGX_OPC_SHRU, TILEGX_OPC_SHUFFLEBYTES,
+  TILEGX_OPC_SUBXSC,
+  BITFIELD(12, 2) /* index 688 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(693),
+  BITFIELD(14, 2) /* index 693 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(698),
+  BITFIELD(16, 2) /* index 698 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE,
+  BITFIELD(18, 4) /* index 703 */,
+  TILEGX_OPC_SUBX, TILEGX_OPC_SUB, CHILD(720), TILEGX_OPC_V1ADDUC,
+  TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADIFFU, TILEGX_OPC_V1AVGU,
+  TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLEU,
+  TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPNE,
+  TILEGX_OPC_V1DDOTPUSA, TILEGX_OPC_V1DDOTPUS, TILEGX_OPC_V1DOTPA,
+  BITFIELD(12, 4) /* index 720 */,
+  TILEGX_OPC_NONE, CHILD(737), CHILD(742), CHILD(747), CHILD(752), CHILD(757),
+  CHILD(762), CHILD(767), CHILD(772), CHILD(777), CHILD(782), CHILD(787),
+  CHILD(792), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 737 */,
+  TILEGX_OPC_CLZ, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 742 */,
+  TILEGX_OPC_CTZ, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 747 */,
+  TILEGX_OPC_FNOP, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 752 */,
+  TILEGX_OPC_FSINGLE_PACK1, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 757 */,
+  TILEGX_OPC_NOP, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 762 */,
+  TILEGX_OPC_PCNT, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 767 */,
+  TILEGX_OPC_REVBITS, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 772 */,
+  TILEGX_OPC_REVBYTES, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 777 */,
+  TILEGX_OPC_TBLIDXB0, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 782 */,
+  TILEGX_OPC_TBLIDXB1, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 787 */,
+  TILEGX_OPC_TBLIDXB2, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(16, 2) /* index 792 */,
+  TILEGX_OPC_TBLIDXB3, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(18, 4) /* index 797 */,
+  TILEGX_OPC_V1DOTPUSA, TILEGX_OPC_V1DOTPUS, TILEGX_OPC_V1DOTP,
+  TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1MAXU,
+  TILEGX_OPC_V1MINU, TILEGX_OPC_V1MNZ, TILEGX_OPC_V1MULTU, TILEGX_OPC_V1MULUS,
+  TILEGX_OPC_V1MULU, TILEGX_OPC_V1MZ, TILEGX_OPC_V1SADAU, TILEGX_OPC_V1SADU,
+  TILEGX_OPC_V1SHL, TILEGX_OPC_V1SHRS,
+  BITFIELD(18, 4) /* index 814 */,
+  TILEGX_OPC_V1SHRU, TILEGX_OPC_V1SUBUC, TILEGX_OPC_V1SUB, TILEGX_OPC_V2ADDSC,
+  TILEGX_OPC_V2ADD, TILEGX_OPC_V2ADIFFS, TILEGX_OPC_V2AVGS,
+  TILEGX_OPC_V2CMPEQ, TILEGX_OPC_V2CMPLES, TILEGX_OPC_V2CMPLEU,
+  TILEGX_OPC_V2CMPLTS, TILEGX_OPC_V2CMPLTU, TILEGX_OPC_V2CMPNE,
+  TILEGX_OPC_V2DOTPA, TILEGX_OPC_V2DOTP, TILEGX_OPC_V2INT_H,
+  BITFIELD(18, 4) /* index 831 */,
+  TILEGX_OPC_V2INT_L, TILEGX_OPC_V2MAXS, TILEGX_OPC_V2MINS, TILEGX_OPC_V2MNZ,
+  TILEGX_OPC_V2MULFSC, TILEGX_OPC_V2MULS, TILEGX_OPC_V2MULTS, TILEGX_OPC_V2MZ,
+  TILEGX_OPC_V2PACKH, TILEGX_OPC_V2PACKL, TILEGX_OPC_V2PACKUC,
+  TILEGX_OPC_V2SADAS, TILEGX_OPC_V2SADAU, TILEGX_OPC_V2SADS,
+  TILEGX_OPC_V2SADU, TILEGX_OPC_V2SHLSC,
+  BITFIELD(18, 4) /* index 848 */,
+  TILEGX_OPC_V2SHL, TILEGX_OPC_V2SHRS, TILEGX_OPC_V2SHRU, TILEGX_OPC_V2SUBSC,
+  TILEGX_OPC_V2SUB, TILEGX_OPC_V4ADDSC, TILEGX_OPC_V4ADD, TILEGX_OPC_V4INT_H,
+  TILEGX_OPC_V4INT_L, TILEGX_OPC_V4PACKSC, TILEGX_OPC_V4SHLSC,
+  TILEGX_OPC_V4SHL, TILEGX_OPC_V4SHRS, TILEGX_OPC_V4SHRU, TILEGX_OPC_V4SUBSC,
+  TILEGX_OPC_V4SUB,
+  BITFIELD(18, 3) /* index 865 */,
+  CHILD(874), CHILD(877), CHILD(880), CHILD(883), CHILD(886), TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(21, 1) /* index 874 */,
+  TILEGX_OPC_XOR, TILEGX_OPC_NONE,
+  BITFIELD(21, 1) /* index 877 */,
+  TILEGX_OPC_V1DDOTPUA, TILEGX_OPC_NONE,
+  BITFIELD(21, 1) /* index 880 */,
+  TILEGX_OPC_V1DDOTPU, TILEGX_OPC_NONE,
+  BITFIELD(21, 1) /* index 883 */,
+  TILEGX_OPC_V1DOTPUA, TILEGX_OPC_NONE,
+  BITFIELD(21, 1) /* index 886 */,
+  TILEGX_OPC_V1DOTPU, TILEGX_OPC_NONE,
+  BITFIELD(18, 4) /* index 889 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHLXI,
+  TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, TILEGX_OPC_SHRUXI, TILEGX_OPC_V1SHLI,
+  TILEGX_OPC_V1SHRSI, TILEGX_OPC_V1SHRUI, TILEGX_OPC_V2SHLI,
+  TILEGX_OPC_V2SHRSI, TILEGX_OPC_V2SHRUI, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE,
+  BITFIELD(0, 2) /* index 906 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(911),
+  BITFIELD(2, 2) /* index 911 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(916),
+  BITFIELD(4, 2) /* index 916 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(921),
+  BITFIELD(6, 2) /* index 921 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(926),
+  BITFIELD(8, 2) /* index 926 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(931),
+  BITFIELD(10, 2) /* index 931 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  TILEGX_OPC_INFOL,
+};
+
+static const unsigned short decode_X1_fsm[1266] =
+{
+  BITFIELD(53, 9) /* index 0 */,
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513),
+  CHILD(513), CHILD(513), CHILD(513), CHILD(513), TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_BEQZT,
+  TILEGX_OPC_BEQZT, TILEGX_OPC_BEQZ, TILEGX_OPC_BEQZ, TILEGX_OPC_BGEZT,
+  TILEGX_OPC_BGEZT, TILEGX_OPC_BGEZ, TILEGX_OPC_BGEZ, TILEGX_OPC_BGTZT,
+  TILEGX_OPC_BGTZT, TILEGX_OPC_BGTZ, TILEGX_OPC_BGTZ, TILEGX_OPC_BLBCT,
+  TILEGX_OPC_BLBCT, TILEGX_OPC_BLBC, TILEGX_OPC_BLBC, TILEGX_OPC_BLBST,
+  TILEGX_OPC_BLBST, TILEGX_OPC_BLBS, TILEGX_OPC_BLBS, TILEGX_OPC_BLEZT,
+  TILEGX_OPC_BLEZT, TILEGX_OPC_BLEZ, TILEGX_OPC_BLEZ, TILEGX_OPC_BLTZT,
+  TILEGX_OPC_BLTZT, TILEGX_OPC_BLTZ, TILEGX_OPC_BLTZ, TILEGX_OPC_BNEZT,
+  TILEGX_OPC_BNEZT, TILEGX_OPC_BNEZ, TILEGX_OPC_BNEZ, CHILD(528), CHILD(578),
+  CHILD(598), CHILD(703), CHILD(723), CHILD(728), CHILD(753), CHILD(758),
+  CHILD(763), CHILD(768), CHILD(773), CHILD(778), TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL,
+  TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_J, TILEGX_OPC_J,
+  TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J,
+  TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J,
+  TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J,
+  TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J,
+  TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J,
+  TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J,
+  CHILD(783), CHILD(800), CHILD(832), CHILD(849), CHILD(1168), CHILD(1185),
+  CHILD(1202), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(1219), TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236), CHILD(1236),
+  CHILD(1236),
+  BITFIELD(37, 2) /* index 513 */,
+  TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(518),
+  BITFIELD(39, 2) /* index 518 */,
+  TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(523),
+  BITFIELD(41, 2) /* index 523 */,
+  TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_MOVELI,
+  BITFIELD(51, 2) /* index 528 */,
+  TILEGX_OPC_NONE, CHILD(533), TILEGX_OPC_ADDXI, CHILD(548),
+  BITFIELD(37, 2) /* index 533 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(538),
+  BITFIELD(39, 2) /* index 538 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(543),
+  BITFIELD(41, 2) /* index 543 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI,
+  BITFIELD(31, 2) /* index 548 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(553),
+  BITFIELD(33, 2) /* index 553 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(558),
+  BITFIELD(35, 2) /* index 558 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(563),
+  BITFIELD(37, 2) /* index 563 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(568),
+  BITFIELD(39, 2) /* index 568 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(573),
+  BITFIELD(41, 2) /* index 573 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO,
+  BITFIELD(51, 2) /* index 578 */,
+  TILEGX_OPC_CMPEQI, TILEGX_OPC_CMPLTSI, TILEGX_OPC_CMPLTUI, CHILD(583),
+  BITFIELD(31, 2) /* index 583 */,
+  TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, CHILD(588),
+  BITFIELD(33, 2) /* index 588 */,
+  TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, CHILD(593),
+  BITFIELD(35, 2) /* index 593 */,
+  TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD,
+  TILEGX_OPC_PREFETCH_ADD_L1_FAULT,
+  BITFIELD(51, 2) /* index 598 */,
+  CHILD(603), CHILD(618), CHILD(633), CHILD(648),
+  BITFIELD(31, 2) /* index 603 */,
+  TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, CHILD(608),
+  BITFIELD(33, 2) /* index 608 */,
+  TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, CHILD(613),
+  BITFIELD(35, 2) /* index 613 */,
+  TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD,
+  TILEGX_OPC_PREFETCH_ADD_L1,
+  BITFIELD(31, 2) /* index 618 */,
+  TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, CHILD(623),
+  BITFIELD(33, 2) /* index 623 */,
+  TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, CHILD(628),
+  BITFIELD(35, 2) /* index 628 */,
+  TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD,
+  TILEGX_OPC_PREFETCH_ADD_L2_FAULT,
+  BITFIELD(31, 2) /* index 633 */,
+  TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, CHILD(638),
+  BITFIELD(33, 2) /* index 638 */,
+  TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, CHILD(643),
+  BITFIELD(35, 2) /* index 643 */,
+  TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD,
+  TILEGX_OPC_PREFETCH_ADD_L2,
+  BITFIELD(31, 2) /* index 648 */,
+  CHILD(653), CHILD(653), CHILD(653), CHILD(673),
+  BITFIELD(43, 2) /* index 653 */,
+  CHILD(658), TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD,
+  BITFIELD(45, 2) /* index 658 */,
+  CHILD(663), TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD,
+  BITFIELD(47, 2) /* index 663 */,
+  CHILD(668), TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD,
+  BITFIELD(49, 2) /* index 668 */,
+  TILEGX_OPC_LD4S_TLS, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD,
+  TILEGX_OPC_LD4S_ADD,
+  BITFIELD(33, 2) /* index 673 */,
+  CHILD(653), CHILD(653), CHILD(653), CHILD(678),
+  BITFIELD(35, 2) /* index 678 */,
+  CHILD(653), CHILD(653), CHILD(653), CHILD(683),
+  BITFIELD(43, 2) /* index 683 */,
+  CHILD(688), TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L3_FAULT, TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  BITFIELD(45, 2) /* index 688 */,
+  CHILD(693), TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L3_FAULT, TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  BITFIELD(47, 2) /* index 693 */,
+  CHILD(698), TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L3_FAULT, TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  BITFIELD(49, 2) /* index 698 */,
+  TILEGX_OPC_LD4S_TLS, TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L3_FAULT, TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  BITFIELD(51, 2) /* index 703 */,
+  CHILD(708), TILEGX_OPC_LDNT1S_ADD, TILEGX_OPC_LDNT1U_ADD,
+  TILEGX_OPC_LDNT2S_ADD,
+  BITFIELD(31, 2) /* index 708 */,
+  TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, CHILD(713),
+  BITFIELD(33, 2) /* index 713 */,
+  TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, CHILD(718),
+  BITFIELD(35, 2) /* index 718 */,
+  TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD,
+  TILEGX_OPC_PREFETCH_ADD_L3,
+  BITFIELD(51, 2) /* index 723 */,
+  TILEGX_OPC_LDNT2U_ADD, TILEGX_OPC_LDNT4S_ADD, TILEGX_OPC_LDNT4U_ADD,
+  TILEGX_OPC_LDNT_ADD,
+  BITFIELD(51, 2) /* index 728 */,
+  CHILD(733), TILEGX_OPC_LDNA_ADD, TILEGX_OPC_MFSPR, TILEGX_OPC_MTSPR,
+  BITFIELD(43, 2) /* index 733 */,
+  CHILD(738), TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD,
+  BITFIELD(45, 2) /* index 738 */,
+  CHILD(743), TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD,
+  BITFIELD(47, 2) /* index 743 */,
+  CHILD(748), TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD,
+  BITFIELD(49, 2) /* index 748 */,
+  TILEGX_OPC_LD_TLS, TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD, TILEGX_OPC_LD_ADD,
+  BITFIELD(51, 2) /* index 753 */,
+  TILEGX_OPC_ORI, TILEGX_OPC_ST1_ADD, TILEGX_OPC_ST2_ADD, TILEGX_OPC_ST4_ADD,
+  BITFIELD(51, 2) /* index 758 */,
+  TILEGX_OPC_STNT1_ADD, TILEGX_OPC_STNT2_ADD, TILEGX_OPC_STNT4_ADD,
+  TILEGX_OPC_STNT_ADD,
+  BITFIELD(51, 2) /* index 763 */,
+  TILEGX_OPC_ST_ADD, TILEGX_OPC_V1ADDI, TILEGX_OPC_V1CMPEQI,
+  TILEGX_OPC_V1CMPLTSI,
+  BITFIELD(51, 2) /* index 768 */,
+  TILEGX_OPC_V1CMPLTUI, TILEGX_OPC_V1MAXUI, TILEGX_OPC_V1MINUI,
+  TILEGX_OPC_V2ADDI,
+  BITFIELD(51, 2) /* index 773 */,
+  TILEGX_OPC_V2CMPEQI, TILEGX_OPC_V2CMPLTSI, TILEGX_OPC_V2CMPLTUI,
+  TILEGX_OPC_V2MAXSI,
+  BITFIELD(51, 2) /* index 778 */,
+  TILEGX_OPC_V2MINSI, TILEGX_OPC_XORI, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(49, 4) /* index 783 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_ADDXSC, TILEGX_OPC_ADDX, TILEGX_OPC_ADD,
+  TILEGX_OPC_AND, TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPEXCH4, TILEGX_OPC_CMPEXCH,
+  TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU,
+  TILEGX_OPC_CMPNE, TILEGX_OPC_DBLALIGN2, TILEGX_OPC_DBLALIGN4,
+  TILEGX_OPC_DBLALIGN6,
+  BITFIELD(49, 4) /* index 800 */,
+  TILEGX_OPC_EXCH4, TILEGX_OPC_EXCH, TILEGX_OPC_FETCHADD4,
+  TILEGX_OPC_FETCHADDGEZ4, TILEGX_OPC_FETCHADDGEZ, TILEGX_OPC_FETCHADD,
+  TILEGX_OPC_FETCHAND4, TILEGX_OPC_FETCHAND, TILEGX_OPC_FETCHOR4,
+  TILEGX_OPC_FETCHOR, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, TILEGX_OPC_NOR,
+  CHILD(817), TILEGX_OPC_ROTL, TILEGX_OPC_SHL1ADDX,
+  BITFIELD(43, 2) /* index 817 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(822),
+  BITFIELD(45, 2) /* index 822 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(827),
+  BITFIELD(47, 2) /* index 827 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE,
+  BITFIELD(49, 4) /* index 832 */,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADDX, TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL3ADDX, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHLX, TILEGX_OPC_SHL,
+  TILEGX_OPC_SHRS, TILEGX_OPC_SHRUX, TILEGX_OPC_SHRU, TILEGX_OPC_ST1,
+  TILEGX_OPC_ST2, TILEGX_OPC_ST4, TILEGX_OPC_STNT1, TILEGX_OPC_STNT2,
+  TILEGX_OPC_STNT4,
+  BITFIELD(46, 7) /* index 849 */,
+  TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT,
+  TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT,
+  TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST,
+  TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_SUBXSC,
+  TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC,
+  TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBX,
+  TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX,
+  TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUB,
+  TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB,
+  TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, CHILD(978), CHILD(987),
+  CHILD(1066), CHILD(1150), CHILD(1159), TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC,
+  TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC,
+  TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD,
+  TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD,
+  TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ,
+  TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ,
+  TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ,
+  TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES,
+  TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES,
+  TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLEU,
+  TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU,
+  TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU,
+  TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS,
+  TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS,
+  TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS,
+  TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU,
+  TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU,
+  TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPNE,
+  TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE,
+  TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE,
+  TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H,
+  TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H,
+  TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H,
+  TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L,
+  TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L,
+  TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L,
+  BITFIELD(43, 3) /* index 978 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_DRAIN, TILEGX_OPC_DTLBPR, TILEGX_OPC_FINV,
+  TILEGX_OPC_FLUSHWB, TILEGX_OPC_FLUSH, TILEGX_OPC_FNOP, TILEGX_OPC_ICOH,
+  BITFIELD(43, 3) /* index 987 */,
+  CHILD(996), TILEGX_OPC_INV, TILEGX_OPC_IRET, TILEGX_OPC_JALRP,
+  TILEGX_OPC_JALR, TILEGX_OPC_JRP, TILEGX_OPC_JR, CHILD(1051),
+  BITFIELD(31, 2) /* index 996 */,
+  CHILD(1001), CHILD(1026), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(33, 2) /* index 1001 */,
+  TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_ILL, CHILD(1006),
+  BITFIELD(35, 2) /* index 1006 */,
+  TILEGX_OPC_ILL, CHILD(1011), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(37, 2) /* index 1011 */,
+  TILEGX_OPC_ILL, CHILD(1016), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(39, 2) /* index 1016 */,
+  TILEGX_OPC_ILL, CHILD(1021), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(41, 2) /* index 1021 */,
+  TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_BPT, TILEGX_OPC_ILL,
+  BITFIELD(33, 2) /* index 1026 */,
+  TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_ILL, CHILD(1031),
+  BITFIELD(35, 2) /* index 1031 */,
+  TILEGX_OPC_ILL, CHILD(1036), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(37, 2) /* index 1036 */,
+  TILEGX_OPC_ILL, CHILD(1041), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(39, 2) /* index 1041 */,
+  TILEGX_OPC_ILL, CHILD(1046), TILEGX_OPC_ILL, TILEGX_OPC_ILL,
+  BITFIELD(41, 2) /* index 1046 */,
+  TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_RAISE, TILEGX_OPC_ILL,
+  BITFIELD(31, 2) /* index 1051 */,
+  TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(1056),
+  BITFIELD(33, 2) /* index 1056 */,
+  TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(1061),
+  BITFIELD(35, 2) /* index 1061 */,
+  TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S,
+  TILEGX_OPC_PREFETCH_L1_FAULT,
+  BITFIELD(43, 3) /* index 1066 */,
+  CHILD(1075), CHILD(1090), CHILD(1105), CHILD(1120), CHILD(1135),
+  TILEGX_OPC_LDNA, TILEGX_OPC_LDNT1S, TILEGX_OPC_LDNT1U,
+  BITFIELD(31, 2) /* index 1075 */,
+  TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(1080),
+  BITFIELD(33, 2) /* index 1080 */,
+  TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(1085),
+  BITFIELD(35, 2) /* index 1085 */,
+  TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_PREFETCH,
+  BITFIELD(31, 2) /* index 1090 */,
+  TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(1095),
+  BITFIELD(33, 2) /* index 1095 */,
+  TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(1100),
+  BITFIELD(35, 2) /* index 1100 */,
+  TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S,
+  TILEGX_OPC_PREFETCH_L2_FAULT,
+  BITFIELD(31, 2) /* index 1105 */,
+  TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(1110),
+  BITFIELD(33, 2) /* index 1110 */,
+  TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(1115),
+  BITFIELD(35, 2) /* index 1115 */,
+  TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_PREFETCH_L2,
+  BITFIELD(31, 2) /* index 1120 */,
+  TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(1125),
+  BITFIELD(33, 2) /* index 1125 */,
+  TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(1130),
+  BITFIELD(35, 2) /* index 1130 */,
+  TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S,
+  TILEGX_OPC_PREFETCH_L3_FAULT,
+  BITFIELD(31, 2) /* index 1135 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(1140),
+  BITFIELD(33, 2) /* index 1140 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(1145),
+  BITFIELD(35, 2) /* index 1145 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_PREFETCH_L3,
+  BITFIELD(43, 3) /* index 1150 */,
+  TILEGX_OPC_LDNT2S, TILEGX_OPC_LDNT2U, TILEGX_OPC_LDNT4S, TILEGX_OPC_LDNT4U,
+  TILEGX_OPC_LDNT, TILEGX_OPC_LD, TILEGX_OPC_LNK, TILEGX_OPC_MF,
+  BITFIELD(43, 3) /* index 1159 */,
+  TILEGX_OPC_NAP, TILEGX_OPC_NOP, TILEGX_OPC_SWINT0, TILEGX_OPC_SWINT1,
+  TILEGX_OPC_SWINT2, TILEGX_OPC_SWINT3, TILEGX_OPC_WH64, TILEGX_OPC_NONE,
+  BITFIELD(49, 4) /* index 1168 */,
+  TILEGX_OPC_V1MAXU, TILEGX_OPC_V1MINU, TILEGX_OPC_V1MNZ, TILEGX_OPC_V1MZ,
+  TILEGX_OPC_V1SHL, TILEGX_OPC_V1SHRS, TILEGX_OPC_V1SHRU, TILEGX_OPC_V1SUBUC,
+  TILEGX_OPC_V1SUB, TILEGX_OPC_V2ADDSC, TILEGX_OPC_V2ADD, TILEGX_OPC_V2CMPEQ,
+  TILEGX_OPC_V2CMPLES, TILEGX_OPC_V2CMPLEU, TILEGX_OPC_V2CMPLTS,
+  TILEGX_OPC_V2CMPLTU,
+  BITFIELD(49, 4) /* index 1185 */,
+  TILEGX_OPC_V2CMPNE, TILEGX_OPC_V2INT_H, TILEGX_OPC_V2INT_L,
+  TILEGX_OPC_V2MAXS, TILEGX_OPC_V2MINS, TILEGX_OPC_V2MNZ, TILEGX_OPC_V2MZ,
+  TILEGX_OPC_V2PACKH, TILEGX_OPC_V2PACKL, TILEGX_OPC_V2PACKUC,
+  TILEGX_OPC_V2SHLSC, TILEGX_OPC_V2SHL, TILEGX_OPC_V2SHRS, TILEGX_OPC_V2SHRU,
+  TILEGX_OPC_V2SUBSC, TILEGX_OPC_V2SUB,
+  BITFIELD(49, 4) /* index 1202 */,
+  TILEGX_OPC_V4ADDSC, TILEGX_OPC_V4ADD, TILEGX_OPC_V4INT_H,
+  TILEGX_OPC_V4INT_L, TILEGX_OPC_V4PACKSC, TILEGX_OPC_V4SHLSC,
+  TILEGX_OPC_V4SHL, TILEGX_OPC_V4SHRS, TILEGX_OPC_V4SHRU, TILEGX_OPC_V4SUBSC,
+  TILEGX_OPC_V4SUB, TILEGX_OPC_XOR, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(49, 4) /* index 1219 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHLXI,
+  TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, TILEGX_OPC_SHRUXI, TILEGX_OPC_V1SHLI,
+  TILEGX_OPC_V1SHRSI, TILEGX_OPC_V1SHRUI, TILEGX_OPC_V2SHLI,
+  TILEGX_OPC_V2SHRSI, TILEGX_OPC_V2SHRUI, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE,
+  BITFIELD(31, 2) /* index 1236 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(1241),
+  BITFIELD(33, 2) /* index 1241 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(1246),
+  BITFIELD(35, 2) /* index 1246 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(1251),
+  BITFIELD(37, 2) /* index 1251 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(1256),
+  BITFIELD(39, 2) /* index 1256 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  CHILD(1261),
+  BITFIELD(41, 2) /* index 1261 */,
+  TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI,
+  TILEGX_OPC_INFOL,
+};
+
+static const unsigned short decode_Y0_fsm[178] =
+{
+  BITFIELD(27, 4) /* index 0 */,
+  CHILD(17), TILEGX_OPC_ADDXI, CHILD(32), TILEGX_OPC_CMPEQI,
+  TILEGX_OPC_CMPLTSI, CHILD(62), CHILD(67), CHILD(118), CHILD(123),
+  CHILD(128), CHILD(133), CHILD(153), CHILD(158), CHILD(163), CHILD(168),
+  CHILD(173),
+  BITFIELD(6, 2) /* index 17 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(22),
+  BITFIELD(8, 2) /* index 22 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(27),
+  BITFIELD(10, 2) /* index 27 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI,
+  BITFIELD(0, 2) /* index 32 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(37),
+  BITFIELD(2, 2) /* index 37 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(42),
+  BITFIELD(4, 2) /* index 42 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(47),
+  BITFIELD(6, 2) /* index 47 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(52),
+  BITFIELD(8, 2) /* index 52 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(57),
+  BITFIELD(10, 2) /* index 57 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO,
+  BITFIELD(18, 2) /* index 62 */,
+  TILEGX_OPC_ADDX, TILEGX_OPC_ADD, TILEGX_OPC_SUBX, TILEGX_OPC_SUB,
+  BITFIELD(15, 5) /* index 67 */,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD,
+  TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD,
+  TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, CHILD(100),
+  CHILD(109), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(12, 3) /* index 100 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_CLZ, TILEGX_OPC_CTZ, TILEGX_OPC_FNOP,
+  TILEGX_OPC_FSINGLE_PACK1, TILEGX_OPC_NOP, TILEGX_OPC_PCNT,
+  TILEGX_OPC_REVBITS,
+  BITFIELD(12, 3) /* index 109 */,
+  TILEGX_OPC_REVBYTES, TILEGX_OPC_TBLIDXB0, TILEGX_OPC_TBLIDXB1,
+  TILEGX_OPC_TBLIDXB2, TILEGX_OPC_TBLIDXB3, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  TILEGX_OPC_NONE,
+  BITFIELD(18, 2) /* index 118 */,
+  TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU,
+  BITFIELD(18, 2) /* index 123 */,
+  TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPNE, TILEGX_OPC_MULAX, TILEGX_OPC_MULX,
+  BITFIELD(18, 2) /* index 128 */,
+  TILEGX_OPC_CMOVEQZ, TILEGX_OPC_CMOVNEZ, TILEGX_OPC_MNZ, TILEGX_OPC_MZ,
+  BITFIELD(18, 2) /* index 133 */,
+  TILEGX_OPC_AND, TILEGX_OPC_NOR, CHILD(138), TILEGX_OPC_XOR,
+  BITFIELD(12, 2) /* index 138 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(143),
+  BITFIELD(14, 2) /* index 143 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(148),
+  BITFIELD(16, 2) /* index 148 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE,
+  BITFIELD(18, 2) /* index 153 */,
+  TILEGX_OPC_ROTL, TILEGX_OPC_SHL, TILEGX_OPC_SHRS, TILEGX_OPC_SHRU,
+  BITFIELD(18, 2) /* index 158 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_SHL1ADDX, TILEGX_OPC_SHL2ADDX,
+  TILEGX_OPC_SHL3ADDX,
+  BITFIELD(18, 2) /* index 163 */,
+  TILEGX_OPC_MUL_HS_HS, TILEGX_OPC_MUL_HU_HU, TILEGX_OPC_MUL_LS_LS,
+  TILEGX_OPC_MUL_LU_LU,
+  BITFIELD(18, 2) /* index 168 */,
+  TILEGX_OPC_MULA_HS_HS, TILEGX_OPC_MULA_HU_HU, TILEGX_OPC_MULA_LS_LS,
+  TILEGX_OPC_MULA_LU_LU,
+  BITFIELD(18, 2) /* index 173 */,
+  TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI,
+};
+
+static const unsigned short decode_Y1_fsm[167] =
+{
+  BITFIELD(58, 4) /* index 0 */,
+  TILEGX_OPC_NONE, CHILD(17), TILEGX_OPC_ADDXI, CHILD(32), TILEGX_OPC_CMPEQI,
+  TILEGX_OPC_CMPLTSI, CHILD(62), CHILD(67), CHILD(117), CHILD(122),
+  CHILD(127), CHILD(132), CHILD(152), CHILD(157), CHILD(162), TILEGX_OPC_NONE,
+  BITFIELD(37, 2) /* index 17 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(22),
+  BITFIELD(39, 2) /* index 22 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(27),
+  BITFIELD(41, 2) /* index 27 */,
+  TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI,
+  BITFIELD(31, 2) /* index 32 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(37),
+  BITFIELD(33, 2) /* index 37 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(42),
+  BITFIELD(35, 2) /* index 42 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(47),
+  BITFIELD(37, 2) /* index 47 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(52),
+  BITFIELD(39, 2) /* index 52 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(57),
+  BITFIELD(41, 2) /* index 57 */,
+  TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO,
+  BITFIELD(49, 2) /* index 62 */,
+  TILEGX_OPC_ADDX, TILEGX_OPC_ADD, TILEGX_OPC_SUBX, TILEGX_OPC_SUB,
+  BITFIELD(47, 4) /* index 67 */,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD,
+  TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL3ADD,
+  TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, CHILD(84),
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE,
+  BITFIELD(43, 3) /* index 84 */,
+  CHILD(93), CHILD(96), CHILD(99), CHILD(102), CHILD(105), CHILD(108),
+  CHILD(111), CHILD(114),
+  BITFIELD(46, 1) /* index 93 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_FNOP,
+  BITFIELD(46, 1) /* index 96 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_ILL,
+  BITFIELD(46, 1) /* index 99 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_JALRP,
+  BITFIELD(46, 1) /* index 102 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_JALR,
+  BITFIELD(46, 1) /* index 105 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_JRP,
+  BITFIELD(46, 1) /* index 108 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_JR,
+  BITFIELD(46, 1) /* index 111 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_LNK,
+  BITFIELD(46, 1) /* index 114 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_NOP,
+  BITFIELD(49, 2) /* index 117 */,
+  TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU,
+  BITFIELD(49, 2) /* index 122 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPNE,
+  BITFIELD(49, 2) /* index 127 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_MNZ, TILEGX_OPC_MZ,
+  BITFIELD(49, 2) /* index 132 */,
+  TILEGX_OPC_AND, TILEGX_OPC_NOR, CHILD(137), TILEGX_OPC_XOR,
+  BITFIELD(43, 2) /* index 137 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(142),
+  BITFIELD(45, 2) /* index 142 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(147),
+  BITFIELD(47, 2) /* index 147 */,
+  TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE,
+  BITFIELD(49, 2) /* index 152 */,
+  TILEGX_OPC_ROTL, TILEGX_OPC_SHL, TILEGX_OPC_SHRS, TILEGX_OPC_SHRU,
+  BITFIELD(49, 2) /* index 157 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_SHL1ADDX, TILEGX_OPC_SHL2ADDX,
+  TILEGX_OPC_SHL3ADDX,
+  BITFIELD(49, 2) /* index 162 */,
+  TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI,
+};
+
+static const unsigned short decode_Y2_fsm[118] =
+{
+  BITFIELD(62, 2) /* index 0 */,
+  TILEGX_OPC_NONE, CHILD(5), CHILD(66), CHILD(109),
+  BITFIELD(55, 3) /* index 5 */,
+  CHILD(14), CHILD(14), CHILD(14), CHILD(17), CHILD(40), CHILD(40), CHILD(40),
+  CHILD(43),
+  BITFIELD(26, 1) /* index 14 */,
+  TILEGX_OPC_LD1S, TILEGX_OPC_LD1U,
+  BITFIELD(26, 1) /* index 17 */,
+  CHILD(20), CHILD(30),
+  BITFIELD(51, 2) /* index 20 */,
+  TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(25),
+  BITFIELD(53, 2) /* index 25 */,
+  TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S,
+  TILEGX_OPC_PREFETCH_L1_FAULT,
+  BITFIELD(51, 2) /* index 30 */,
+  TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(35),
+  BITFIELD(53, 2) /* index 35 */,
+  TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_PREFETCH,
+  BITFIELD(26, 1) /* index 40 */,
+  TILEGX_OPC_LD2S, TILEGX_OPC_LD2U,
+  BITFIELD(26, 1) /* index 43 */,
+  CHILD(46), CHILD(56),
+  BITFIELD(51, 2) /* index 46 */,
+  TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(51),
+  BITFIELD(53, 2) /* index 51 */,
+  TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S,
+  TILEGX_OPC_PREFETCH_L2_FAULT,
+  BITFIELD(51, 2) /* index 56 */,
+  TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(61),
+  BITFIELD(53, 2) /* index 61 */,
+  TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_PREFETCH_L2,
+  BITFIELD(56, 2) /* index 66 */,
+  CHILD(71), CHILD(74), CHILD(90), CHILD(93),
+  BITFIELD(26, 1) /* index 71 */,
+  TILEGX_OPC_NONE, TILEGX_OPC_LD4S,
+  BITFIELD(26, 1) /* index 74 */,
+  TILEGX_OPC_NONE, CHILD(77),
+  BITFIELD(51, 2) /* index 77 */,
+  TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(82),
+  BITFIELD(53, 2) /* index 82 */,
+  TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(87),
+  BITFIELD(55, 1) /* index 87 */,
+  TILEGX_OPC_LD4S, TILEGX_OPC_PREFETCH_L3_FAULT,
+  BITFIELD(26, 1) /* index 90 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_LD,
+  BITFIELD(26, 1) /* index 93 */,
+  CHILD(96), TILEGX_OPC_LD,
+  BITFIELD(51, 2) /* index 96 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(101),
+  BITFIELD(53, 2) /* index 101 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(106),
+  BITFIELD(55, 1) /* index 106 */,
+  TILEGX_OPC_LD4U, TILEGX_OPC_PREFETCH_L3,
+  BITFIELD(26, 1) /* index 109 */,
+  CHILD(112), CHILD(115),
+  BITFIELD(57, 1) /* index 112 */,
+  TILEGX_OPC_ST1, TILEGX_OPC_ST4,
+  BITFIELD(57, 1) /* index 115 */,
+  TILEGX_OPC_ST2, TILEGX_OPC_ST,
+};
+
+#undef BITFIELD
+#undef CHILD
+
+const unsigned short * const
+tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS] =
+{
+  decode_X0_fsm,
+  decode_X1_fsm,
+  decode_Y0_fsm,
+  decode_Y1_fsm,
+  decode_Y2_fsm
+};
+
+const struct tilegx_operand tilegx_operands[35] =
+{
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_X0),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_X0, get_Imm8_X0
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_X1),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_X1, get_Imm8_X1
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_Y0),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_Y0, get_Imm8_Y0
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_Y1),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_Y1, get_Imm8_Y1
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM16_X0_HW0_LAST),
+    16, 1, 0, 0, 0, 0,
+    create_Imm16_X0, get_Imm16_X0
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM16_X1_HW0_LAST),
+    16, 1, 0, 0, 0, 0,
+    create_Imm16_X1, get_Imm16_X1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_X1, get_Dest_X1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_X1, get_SrcA_X1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_X0, get_Dest_X0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_X0, get_SrcA_X0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_Y0, get_Dest_Y0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_Y0, get_SrcA_Y0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_Y1, get_Dest_Y1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_Y1, get_SrcA_Y1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_Y2, get_SrcA_Y2
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 1, 0, 0,
+    create_SrcA_X1, get_SrcA_X1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_X0, get_SrcB_X0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_X1, get_SrcB_X1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_Y0, get_SrcB_Y0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_Y1, get_SrcB_Y1
+  },
+  {
+    TILEGX_OP_TYPE_ADDRESS, BFD_RELOC(TILEGX_BROFF_X1),
+    17, 1, 0, 0, 1, TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    create_BrOff_X1, get_BrOff_X1
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_MMSTART_X0),
+    6, 0, 0, 0, 0, 0,
+    create_BFStart_X0, get_BFStart_X0
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_MMEND_X0),
+    6, 0, 0, 0, 0, 0,
+    create_BFEnd_X0, get_BFEnd_X0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 1, 0, 0,
+    create_Dest_X0, get_Dest_X0
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 1, 0, 0,
+    create_Dest_Y0, get_Dest_Y0
+  },
+  {
+    TILEGX_OP_TYPE_ADDRESS, BFD_RELOC(TILEGX_JUMPOFF_X1),
+    27, 1, 0, 0, 1, TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    create_JumpOff_X1, get_JumpOff_X1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_SrcBDest_Y2, get_SrcBDest_Y2
+  },
+  {
+    TILEGX_OP_TYPE_SPR, BFD_RELOC(TILEGX_MF_IMM14_X1),
+    14, 0, 0, 0, 0, 0,
+    create_MF_Imm14_X1, get_MF_Imm14_X1
+  },
+  {
+    TILEGX_OP_TYPE_SPR, BFD_RELOC(TILEGX_MT_IMM14_X1),
+    14, 0, 0, 0, 0, 0,
+    create_MT_Imm14_X1, get_MT_Imm14_X1
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_X0),
+    6, 0, 0, 0, 0, 0,
+    create_ShAmt_X0, get_ShAmt_X0
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_X1),
+    6, 0, 0, 0, 0, 0,
+    create_ShAmt_X1, get_ShAmt_X1
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_Y0),
+    6, 0, 0, 0, 0, 0,
+    create_ShAmt_Y0, get_ShAmt_Y0
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_Y1),
+    6, 0, 0, 0, 0, 0,
+    create_ShAmt_Y1, get_ShAmt_Y1
+  },
+  {
+    TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcBDest_Y2, get_SrcBDest_Y2
+  },
+  {
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_DEST_IMM8_X1),
+    8, 1, 0, 0, 0, 0,
+    create_Dest_Imm8_X1, get_Dest_Imm8_X1
+  }
+};
+
+/* Given a set of bundle bits and a specific pipe, returns which
+ * instruction the bundle contains in that pipe.
+ */
+const struct tilegx_opcode *
+find_opcode(tilegx_bundle_bits bits, tilegx_pipeline pipe)
+{
+  const unsigned short *table = tilegx_bundle_decoder_fsms[pipe];
+  int index = 0;
+
+  while (1)
+  {
+    unsigned short bitspec = table[index];
+    unsigned int bitfield =
+      ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6);
+
+    unsigned short next = table[index + 1 + bitfield];
+    if (next <= TILEGX_OPC_NONE)
+      return &tilegx_opcodes[next];
+
+    index = next - TILEGX_OPC_NONE;
+  }
+}
+
+int
+parse_insn_tilegx(tilegx_bundle_bits bits,
+                  unsigned long long pc,
+                  struct tilegx_decoded_instruction
+                  decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE])
+{
+  int num_instructions = 0;
+  int pipe;
+
+  int min_pipe, max_pipe;
+  if ((bits & TILEGX_BUNDLE_MODE_MASK) == 0)
+  {
+    min_pipe = TILEGX_PIPELINE_X0;
+    max_pipe = TILEGX_PIPELINE_X1;
+  }
+  else
+  {
+    min_pipe = TILEGX_PIPELINE_Y0;
+    max_pipe = TILEGX_PIPELINE_Y2;
+  }
+
+  /* For each pipe, find an instruction that fits. */
+  for (pipe = min_pipe; pipe <= max_pipe; pipe++)
+  {
+    const struct tilegx_opcode *opc;
+    struct tilegx_decoded_instruction *d;
+    int i;
+
+    d = &decoded[num_instructions++];
+    opc = find_opcode (bits, (tilegx_pipeline)pipe);
+    d->opcode = opc;
+
+    /* Decode each operand, sign extending, etc. as appropriate. */
+    for (i = 0; i < opc->num_operands; i++)
+    {
+      const struct tilegx_operand *op =
+        &tilegx_operands[opc->operands[pipe][i]];
+      int raw_opval = op->extract (bits);
+      long long opval;
+
+      if (op->is_signed)
+      {
+        /* Sign-extend the operand. */
+        int shift = (int)((sizeof(int) * 8) - op->num_bits);
+        raw_opval = (raw_opval << shift) >> shift;
+      }
+
+      /* Adjust PC-relative scaled branch offsets. */
+      if (op->type == TILEGX_OP_TYPE_ADDRESS)
+        opval = (raw_opval * TILEGX_BUNDLE_SIZE_IN_BYTES) + pc;
+      else
+        opval = raw_opval;
+
+      /* Record the final value. */
+      d->operands[i] = op;
+      d->operand_values[i] = opval;
+    }
+  }
+
+  return num_instructions;
+}
+
+struct tilegx_spr
+{
+  /* The number */
+  int number;
+
+  /* The name */
+  const char *name;
+};
+
+static int
+tilegx_spr_compare (const void *a_ptr, const void *b_ptr)
+{
+  const struct tilegx_spr *a = (const struct tilegx_spr *) a_ptr;
+  const struct tilegx_spr *b = (const struct tilegx_spr *) b_ptr;
+  return (a->number - b->number);
+}
+
+const struct tilegx_spr tilegx_sprs[] = {
+  { 0, "MPL_MEM_ERROR_SET_0" },
+  { 1, "MPL_MEM_ERROR_SET_1" },
+  { 2, "MPL_MEM_ERROR_SET_2" },
+  { 3, "MPL_MEM_ERROR_SET_3" },
+  { 4, "MPL_MEM_ERROR" },
+  { 5, "MEM_ERROR_CBOX_ADDR" },
+  { 6, "MEM_ERROR_CBOX_STATUS" },
+  { 7, "MEM_ERROR_ENABLE" },
+  { 8, "MEM_ERROR_MBOX_ADDR" },
+  { 9, "MEM_ERROR_MBOX_STATUS" },
+  { 10, "SBOX_ERROR" },
+  { 11, "XDN_DEMUX_ERROR" },
+  { 256, "MPL_SINGLE_STEP_3_SET_0" },
+  { 257, "MPL_SINGLE_STEP_3_SET_1" },
+  { 258, "MPL_SINGLE_STEP_3_SET_2" },
+  { 259, "MPL_SINGLE_STEP_3_SET_3" },
+  { 260, "MPL_SINGLE_STEP_3" },
+  { 261, "SINGLE_STEP_CONTROL_3" },
+  { 512, "MPL_SINGLE_STEP_2_SET_0" },
+  { 513, "MPL_SINGLE_STEP_2_SET_1" },
+  { 514, "MPL_SINGLE_STEP_2_SET_2" },
+  { 515, "MPL_SINGLE_STEP_2_SET_3" },
+  { 516, "MPL_SINGLE_STEP_2" },
+  { 517, "SINGLE_STEP_CONTROL_2" },
+  { 768, "MPL_SINGLE_STEP_1_SET_0" },
+  { 769, "MPL_SINGLE_STEP_1_SET_1" },
+  { 770, "MPL_SINGLE_STEP_1_SET_2" },
+  { 771, "MPL_SINGLE_STEP_1_SET_3" },
+  { 772, "MPL_SINGLE_STEP_1" },
+  { 773, "SINGLE_STEP_CONTROL_1" },
+  { 1024, "MPL_SINGLE_STEP_0_SET_0" },
+  { 1025, "MPL_SINGLE_STEP_0_SET_1" },
+  { 1026, "MPL_SINGLE_STEP_0_SET_2" },
+  { 1027, "MPL_SINGLE_STEP_0_SET_3" },
+  { 1028, "MPL_SINGLE_STEP_0" },
+  { 1029, "SINGLE_STEP_CONTROL_0" },
+  { 1280, "MPL_IDN_COMPLETE_SET_0" },
+  { 1281, "MPL_IDN_COMPLETE_SET_1" },
+  { 1282, "MPL_IDN_COMPLETE_SET_2" },
+  { 1283, "MPL_IDN_COMPLETE_SET_3" },
+  { 1284, "MPL_IDN_COMPLETE" },
+  { 1285, "IDN_COMPLETE_PENDING" },
+  { 1536, "MPL_UDN_COMPLETE_SET_0" },
+  { 1537, "MPL_UDN_COMPLETE_SET_1" },
+  { 1538, "MPL_UDN_COMPLETE_SET_2" },
+  { 1539, "MPL_UDN_COMPLETE_SET_3" },
+  { 1540, "MPL_UDN_COMPLETE" },
+  { 1541, "UDN_COMPLETE_PENDING" },
+  { 1792, "MPL_ITLB_MISS_SET_0" },
+  { 1793, "MPL_ITLB_MISS_SET_1" },
+  { 1794, "MPL_ITLB_MISS_SET_2" },
+  { 1795, "MPL_ITLB_MISS_SET_3" },
+  { 1796, "MPL_ITLB_MISS" },
+  { 1797, "ITLB_TSB_BASE_ADDR_0" },
+  { 1798, "ITLB_TSB_BASE_ADDR_1" },
+  { 1920, "ITLB_CURRENT_ATTR" },
+  { 1921, "ITLB_CURRENT_PA" },
+  { 1922, "ITLB_CURRENT_VA" },
+  { 1923, "ITLB_INDEX" },
+  { 1924, "ITLB_MATCH_0" },
+  { 1925, "ITLB_PERF" },
+  { 1926, "ITLB_PR" },
+  { 1927, "ITLB_TSB_ADDR_0" },
+  { 1928, "ITLB_TSB_ADDR_1" },
+  { 1929, "ITLB_TSB_FILL_CURRENT_ATTR" },
+  { 1930, "ITLB_TSB_FILL_MATCH" },
+  { 1931, "NUMBER_ITLB" },
+  { 1932, "REPLACEMENT_ITLB" },
+  { 1933, "WIRED_ITLB" },
+  { 2048, "MPL_ILL_SET_0" },
+  { 2049, "MPL_ILL_SET_1" },
+  { 2050, "MPL_ILL_SET_2" },
+  { 2051, "MPL_ILL_SET_3" },
+  { 2052, "MPL_ILL" },
+  { 2304, "MPL_GPV_SET_0" },
+  { 2305, "MPL_GPV_SET_1" },
+  { 2306, "MPL_GPV_SET_2" },
+  { 2307, "MPL_GPV_SET_3" },
+  { 2308, "MPL_GPV" },
+  { 2309, "GPV_REASON" },
+  { 2560, "MPL_IDN_ACCESS_SET_0" },
+  { 2561, "MPL_IDN_ACCESS_SET_1" },
+  { 2562, "MPL_IDN_ACCESS_SET_2" },
+  { 2563, "MPL_IDN_ACCESS_SET_3" },
+  { 2564, "MPL_IDN_ACCESS" },
+  { 2565, "IDN_DEMUX_COUNT_0" },
+  { 2566, "IDN_DEMUX_COUNT_1" },
+  { 2567, "IDN_FLUSH_EGRESS" },
+  { 2568, "IDN_PENDING" },
+  { 2569, "IDN_ROUTE_ORDER" },
+  { 2570, "IDN_SP_FIFO_CNT" },
+  { 2688, "IDN_DATA_AVAIL" },
+  { 2816, "MPL_UDN_ACCESS_SET_0" },
+  { 2817, "MPL_UDN_ACCESS_SET_1" },
+  { 2818, "MPL_UDN_ACCESS_SET_2" },
+  { 2819, "MPL_UDN_ACCESS_SET_3" },
+  { 2820, "MPL_UDN_ACCESS" },
+  { 2821, "UDN_DEMUX_COUNT_0" },
+  { 2822, "UDN_DEMUX_COUNT_1" },
+  { 2823, "UDN_DEMUX_COUNT_2" },
+  { 2824, "UDN_DEMUX_COUNT_3" },
+  { 2825, "UDN_FLUSH_EGRESS" },
+  { 2826, "UDN_PENDING" },
+  { 2827, "UDN_ROUTE_ORDER" },
+  { 2828, "UDN_SP_FIFO_CNT" },
+  { 2944, "UDN_DATA_AVAIL" },
+  { 3072, "MPL_SWINT_3_SET_0" },
+  { 3073, "MPL_SWINT_3_SET_1" },
+  { 3074, "MPL_SWINT_3_SET_2" },
+  { 3075, "MPL_SWINT_3_SET_3" },
+  { 3076, "MPL_SWINT_3" },
+  { 3328, "MPL_SWINT_2_SET_0" },
+  { 3329, "MPL_SWINT_2_SET_1" },
+  { 3330, "MPL_SWINT_2_SET_2" },
+  { 3331, "MPL_SWINT_2_SET_3" },
+  { 3332, "MPL_SWINT_2" },
+  { 3584, "MPL_SWINT_1_SET_0" },
+  { 3585, "MPL_SWINT_1_SET_1" },
+  { 3586, "MPL_SWINT_1_SET_2" },
+  { 3587, "MPL_SWINT_1_SET_3" },
+  { 3588, "MPL_SWINT_1" },
+  { 3840, "MPL_SWINT_0_SET_0" },
+  { 3841, "MPL_SWINT_0_SET_1" },
+  { 3842, "MPL_SWINT_0_SET_2" },
+  { 3843, "MPL_SWINT_0_SET_3" },
+  { 3844, "MPL_SWINT_0" },
+  { 4096, "MPL_ILL_TRANS_SET_0" },
+  { 4097, "MPL_ILL_TRANS_SET_1" },
+  { 4098, "MPL_ILL_TRANS_SET_2" },
+  { 4099, "MPL_ILL_TRANS_SET_3" },
+  { 4100, "MPL_ILL_TRANS" },
+  { 4101, "ILL_TRANS_REASON" },
+  { 4102, "ILL_VA_PC" },
+  { 4352, "MPL_UNALIGN_DATA_SET_0" },
+  { 4353, "MPL_UNALIGN_DATA_SET_1" },
+  { 4354, "MPL_UNALIGN_DATA_SET_2" },
+  { 4355, "MPL_UNALIGN_DATA_SET_3" },
+  { 4356, "MPL_UNALIGN_DATA" },
+  { 4608, "MPL_DTLB_MISS_SET_0" },
+  { 4609, "MPL_DTLB_MISS_SET_1" },
+  { 4610, "MPL_DTLB_MISS_SET_2" },
+  { 4611, "MPL_DTLB_MISS_SET_3" },
+  { 4612, "MPL_DTLB_MISS" },
+  { 4613, "DTLB_TSB_BASE_ADDR_0" },
+  { 4614, "DTLB_TSB_BASE_ADDR_1" },
+  { 4736, "AAR" },
+  { 4737, "CACHE_PINNED_WAYS" },
+  { 4738, "DTLB_BAD_ADDR" },
+  { 4739, "DTLB_BAD_ADDR_REASON" },
+  { 4740, "DTLB_CURRENT_ATTR" },
+  { 4741, "DTLB_CURRENT_PA" },
+  { 4742, "DTLB_CURRENT_VA" },
+  { 4743, "DTLB_INDEX" },
+  { 4744, "DTLB_MATCH_0" },
+  { 4745, "DTLB_PERF" },
+  { 4746, "DTLB_TSB_ADDR_0" },
+  { 4747, "DTLB_TSB_ADDR_1" },
+  { 4748, "DTLB_TSB_FILL_CURRENT_ATTR" },
+  { 4749, "DTLB_TSB_FILL_MATCH" },
+  { 4750, "NUMBER_DTLB" },
+  { 4751, "REPLACEMENT_DTLB" },
+  { 4752, "WIRED_DTLB" },
+  { 4864, "MPL_DTLB_ACCESS_SET_0" },
+  { 4865, "MPL_DTLB_ACCESS_SET_1" },
+  { 4866, "MPL_DTLB_ACCESS_SET_2" },
+  { 4867, "MPL_DTLB_ACCESS_SET_3" },
+  { 4868, "MPL_DTLB_ACCESS" },
+  { 5120, "MPL_IDN_FIREWALL_SET_0" },
+  { 5121, "MPL_IDN_FIREWALL_SET_1" },
+  { 5122, "MPL_IDN_FIREWALL_SET_2" },
+  { 5123, "MPL_IDN_FIREWALL_SET_3" },
+  { 5124, "MPL_IDN_FIREWALL" },
+  { 5125, "IDN_DIRECTION_PROTECT" },
+  { 5376, "MPL_UDN_FIREWALL_SET_0" },
+  { 5377, "MPL_UDN_FIREWALL_SET_1" },
+  { 5378, "MPL_UDN_FIREWALL_SET_2" },
+  { 5379, "MPL_UDN_FIREWALL_SET_3" },
+  { 5380, "MPL_UDN_FIREWALL" },
+  { 5381, "UDN_DIRECTION_PROTECT" },
+  { 5632, "MPL_TILE_TIMER_SET_0" },
+  { 5633, "MPL_TILE_TIMER_SET_1" },
+  { 5634, "MPL_TILE_TIMER_SET_2" },
+  { 5635, "MPL_TILE_TIMER_SET_3" },
+  { 5636, "MPL_TILE_TIMER" },
+  { 5637, "TILE_TIMER_CONTROL" },
+  { 5888, "MPL_AUX_TILE_TIMER_SET_0" },
+  { 5889, "MPL_AUX_TILE_TIMER_SET_1" },
+  { 5890, "MPL_AUX_TILE_TIMER_SET_2" },
+  { 5891, "MPL_AUX_TILE_TIMER_SET_3" },
+  { 5892, "MPL_AUX_TILE_TIMER" },
+  { 5893, "AUX_TILE_TIMER_CONTROL" },
+  { 6144, "MPL_IDN_TIMER_SET_0" },
+  { 6145, "MPL_IDN_TIMER_SET_1" },
+  { 6146, "MPL_IDN_TIMER_SET_2" },
+  { 6147, "MPL_IDN_TIMER_SET_3" },
+  { 6148, "MPL_IDN_TIMER" },
+  { 6149, "IDN_DEADLOCK_COUNT" },
+  { 6150, "IDN_DEADLOCK_TIMEOUT" },
+  { 6400, "MPL_UDN_TIMER_SET_0" },
+  { 6401, "MPL_UDN_TIMER_SET_1" },
+  { 6402, "MPL_UDN_TIMER_SET_2" },
+  { 6403, "MPL_UDN_TIMER_SET_3" },
+  { 6404, "MPL_UDN_TIMER" },
+  { 6405, "UDN_DEADLOCK_COUNT" },
+  { 6406, "UDN_DEADLOCK_TIMEOUT" },
+  { 6656, "MPL_IDN_AVAIL_SET_0" },
+  { 6657, "MPL_IDN_AVAIL_SET_1" },
+  { 6658, "MPL_IDN_AVAIL_SET_2" },
+  { 6659, "MPL_IDN_AVAIL_SET_3" },
+  { 6660, "MPL_IDN_AVAIL" },
+  { 6661, "IDN_AVAIL_EN" },
+  { 6912, "MPL_UDN_AVAIL_SET_0" },
+  { 6913, "MPL_UDN_AVAIL_SET_1" },
+  { 6914, "MPL_UDN_AVAIL_SET_2" },
+  { 6915, "MPL_UDN_AVAIL_SET_3" },
+  { 6916, "MPL_UDN_AVAIL" },
+  { 6917, "UDN_AVAIL_EN" },
+  { 7168, "MPL_IPI_3_SET_0" },
+  { 7169, "MPL_IPI_3_SET_1" },
+  { 7170, "MPL_IPI_3_SET_2" },
+  { 7171, "MPL_IPI_3_SET_3" },
+  { 7172, "MPL_IPI_3" },
+  { 7173, "IPI_EVENT_3" },
+  { 7174, "IPI_EVENT_RESET_3" },
+  { 7175, "IPI_EVENT_SET_3" },
+  { 7176, "IPI_MASK_3" },
+  { 7177, "IPI_MASK_RESET_3" },
+  { 7178, "IPI_MASK_SET_3" },
+  { 7424, "MPL_IPI_2_SET_0" },
+  { 7425, "MPL_IPI_2_SET_1" },
+  { 7426, "MPL_IPI_2_SET_2" },
+  { 7427, "MPL_IPI_2_SET_3" },
+  { 7428, "MPL_IPI_2" },
+  { 7429, "IPI_EVENT_2" },
+  { 7430, "IPI_EVENT_RESET_2" },
+  { 7431, "IPI_EVENT_SET_2" },
+  { 7432, "IPI_MASK_2" },
+  { 7433, "IPI_MASK_RESET_2" },
+  { 7434, "IPI_MASK_SET_2" },
+  { 7680, "MPL_IPI_1_SET_0" },
+  { 7681, "MPL_IPI_1_SET_1" },
+  { 7682, "MPL_IPI_1_SET_2" },
+  { 7683, "MPL_IPI_1_SET_3" },
+  { 7684, "MPL_IPI_1" },
+  { 7685, "IPI_EVENT_1" },
+  { 7686, "IPI_EVENT_RESET_1" },
+  { 7687, "IPI_EVENT_SET_1" },
+  { 7688, "IPI_MASK_1" },
+  { 7689, "IPI_MASK_RESET_1" },
+  { 7690, "IPI_MASK_SET_1" },
+  { 7936, "MPL_IPI_0_SET_0" },
+  { 7937, "MPL_IPI_0_SET_1" },
+  { 7938, "MPL_IPI_0_SET_2" },
+  { 7939, "MPL_IPI_0_SET_3" },
+  { 7940, "MPL_IPI_0" },
+  { 7941, "IPI_EVENT_0" },
+  { 7942, "IPI_EVENT_RESET_0" },
+  { 7943, "IPI_EVENT_SET_0" },
+  { 7944, "IPI_MASK_0" },
+  { 7945, "IPI_MASK_RESET_0" },
+  { 7946, "IPI_MASK_SET_0" },
+  { 8192, "MPL_PERF_COUNT_SET_0" },
+  { 8193, "MPL_PERF_COUNT_SET_1" },
+  { 8194, "MPL_PERF_COUNT_SET_2" },
+  { 8195, "MPL_PERF_COUNT_SET_3" },
+  { 8196, "MPL_PERF_COUNT" },
+  { 8197, "PERF_COUNT_0" },
+  { 8198, "PERF_COUNT_1" },
+  { 8199, "PERF_COUNT_CTL" },
+  { 8200, "PERF_COUNT_DN_CTL" },
+  { 8201, "PERF_COUNT_STS" },
+  { 8202, "WATCH_MASK" },
+  { 8203, "WATCH_VAL" },
+  { 8448, "MPL_AUX_PERF_COUNT_SET_0" },
+  { 8449, "MPL_AUX_PERF_COUNT_SET_1" },
+  { 8450, "MPL_AUX_PERF_COUNT_SET_2" },
+  { 8451, "MPL_AUX_PERF_COUNT_SET_3" },
+  { 8452, "MPL_AUX_PERF_COUNT" },
+  { 8453, "AUX_PERF_COUNT_0" },
+  { 8454, "AUX_PERF_COUNT_1" },
+  { 8455, "AUX_PERF_COUNT_CTL" },
+  { 8456, "AUX_PERF_COUNT_STS" },
+  { 8704, "MPL_INTCTRL_3_SET_0" },
+  { 8705, "MPL_INTCTRL_3_SET_1" },
+  { 8706, "MPL_INTCTRL_3_SET_2" },
+  { 8707, "MPL_INTCTRL_3_SET_3" },
+  { 8708, "MPL_INTCTRL_3" },
+  { 8709, "INTCTRL_3_STATUS" },
+  { 8710, "INTERRUPT_MASK_3" },
+  { 8711, "INTERRUPT_MASK_RESET_3" },
+  { 8712, "INTERRUPT_MASK_SET_3" },
+  { 8713, "INTERRUPT_VECTOR_BASE_3" },
+  { 8714, "SINGLE_STEP_EN_0_3" },
+  { 8715, "SINGLE_STEP_EN_1_3" },
+  { 8716, "SINGLE_STEP_EN_2_3" },
+  { 8717, "SINGLE_STEP_EN_3_3" },
+  { 8832, "EX_CONTEXT_3_0" },
+  { 8833, "EX_CONTEXT_3_1" },
+  { 8834, "SYSTEM_SAVE_3_0" },
+  { 8835, "SYSTEM_SAVE_3_1" },
+  { 8836, "SYSTEM_SAVE_3_2" },
+  { 8837, "SYSTEM_SAVE_3_3" },
+  { 8960, "MPL_INTCTRL_2_SET_0" },
+  { 8961, "MPL_INTCTRL_2_SET_1" },
+  { 8962, "MPL_INTCTRL_2_SET_2" },
+  { 8963, "MPL_INTCTRL_2_SET_3" },
+  { 8964, "MPL_INTCTRL_2" },
+  { 8965, "INTCTRL_2_STATUS" },
+  { 8966, "INTERRUPT_MASK_2" },
+  { 8967, "INTERRUPT_MASK_RESET_2" },
+  { 8968, "INTERRUPT_MASK_SET_2" },
+  { 8969, "INTERRUPT_VECTOR_BASE_2" },
+  { 8970, "SINGLE_STEP_EN_0_2" },
+  { 8971, "SINGLE_STEP_EN_1_2" },
+  { 8972, "SINGLE_STEP_EN_2_2" },
+  { 8973, "SINGLE_STEP_EN_3_2" },
+  { 9088, "EX_CONTEXT_2_0" },
+  { 9089, "EX_CONTEXT_2_1" },
+  { 9090, "SYSTEM_SAVE_2_0" },
+  { 9091, "SYSTEM_SAVE_2_1" },
+  { 9092, "SYSTEM_SAVE_2_2" },
+  { 9093, "SYSTEM_SAVE_2_3" },
+  { 9216, "MPL_INTCTRL_1_SET_0" },
+  { 9217, "MPL_INTCTRL_1_SET_1" },
+  { 9218, "MPL_INTCTRL_1_SET_2" },
+  { 9219, "MPL_INTCTRL_1_SET_3" },
+  { 9220, "MPL_INTCTRL_1" },
+  { 9221, "INTCTRL_1_STATUS" },
+  { 9222, "INTERRUPT_MASK_1" },
+  { 9223, "INTERRUPT_MASK_RESET_1" },
+  { 9224, "INTERRUPT_MASK_SET_1" },
+  { 9225, "INTERRUPT_VECTOR_BASE_1" },
+  { 9226, "SINGLE_STEP_EN_0_1" },
+  { 9227, "SINGLE_STEP_EN_1_1" },
+  { 9228, "SINGLE_STEP_EN_2_1" },
+  { 9229, "SINGLE_STEP_EN_3_1" },
+  { 9344, "EX_CONTEXT_1_0" },
+  { 9345, "EX_CONTEXT_1_1" },
+  { 9346, "SYSTEM_SAVE_1_0" },
+  { 9347, "SYSTEM_SAVE_1_1" },
+  { 9348, "SYSTEM_SAVE_1_2" },
+  { 9349, "SYSTEM_SAVE_1_3" },
+  { 9472, "MPL_INTCTRL_0_SET_0" },
+  { 9473, "MPL_INTCTRL_0_SET_1" },
+  { 9474, "MPL_INTCTRL_0_SET_2" },
+  { 9475, "MPL_INTCTRL_0_SET_3" },
+  { 9476, "MPL_INTCTRL_0" },
+  { 9477, "INTCTRL_0_STATUS" },
+  { 9478, "INTERRUPT_MASK_0" },
+  { 9479, "INTERRUPT_MASK_RESET_0" },
+  { 9480, "INTERRUPT_MASK_SET_0" },
+  { 9481, "INTERRUPT_VECTOR_BASE_0" },
+  { 9482, "SINGLE_STEP_EN_0_0" },
+  { 9483, "SINGLE_STEP_EN_1_0" },
+  { 9484, "SINGLE_STEP_EN_2_0" },
+  { 9485, "SINGLE_STEP_EN_3_0" },
+  { 9600, "EX_CONTEXT_0_0" },
+  { 9601, "EX_CONTEXT_0_1" },
+  { 9602, "SYSTEM_SAVE_0_0" },
+  { 9603, "SYSTEM_SAVE_0_1" },
+  { 9604, "SYSTEM_SAVE_0_2" },
+  { 9605, "SYSTEM_SAVE_0_3" },
+  { 9728, "MPL_BOOT_ACCESS_SET_0" },
+  { 9729, "MPL_BOOT_ACCESS_SET_1" },
+  { 9730, "MPL_BOOT_ACCESS_SET_2" },
+  { 9731, "MPL_BOOT_ACCESS_SET_3" },
+  { 9732, "MPL_BOOT_ACCESS" },
+  { 9733, "BIG_ENDIAN_CONFIG" },
+  { 9734, "CACHE_INVALIDATION_COMPRESSION_MODE" },
+  { 9735, "CACHE_INVALIDATION_MASK_0" },
+  { 9736, "CACHE_INVALIDATION_MASK_1" },
+  { 9737, "CACHE_INVALIDATION_MASK_2" },
+  { 9738, "CBOX_CACHEASRAM_CONFIG" },
+  { 9739, "CBOX_CACHE_CONFIG" },
+  { 9740, "CBOX_HOME_MAP_ADDR" },
+  { 9741, "CBOX_HOME_MAP_DATA" },
+  { 9742, "CBOX_MMAP_0" },
+  { 9743, "CBOX_MMAP_1" },
+  { 9744, "CBOX_MMAP_2" },
+  { 9745, "CBOX_MMAP_3" },
+  { 9746, "CBOX_MSR" },
+  { 9747, "DIAG_BCST_CTL" },
+  { 9748, "DIAG_BCST_MASK" },
+  { 9749, "DIAG_BCST_TRIGGER" },
+  { 9750, "DIAG_MUX_CTL" },
+  { 9751, "DIAG_TRACE_CTL" },
+  { 9752, "DIAG_TRACE_DATA" },
+  { 9753, "DIAG_TRACE_STS" },
+  { 9754, "IDN_DEMUX_BUF_THRESH" },
+  { 9755, "L1_I_PIN_WAY_0" },
+  { 9756, "MEM_ROUTE_ORDER" },
+  { 9757, "MEM_STRIPE_CONFIG" },
+  { 9758, "PERF_COUNT_PLS" },
+  { 9759, "PSEUDO_RANDOM_NUMBER_MODIFY" },
+  { 9760, "QUIESCE_CTL" },
+  { 9761, "RSHIM_COORD" },
+  { 9762, "SBOX_CONFIG" },
+  { 9763, "UDN_DEMUX_BUF_THRESH" },
+  { 9764, "XDN_CORE_STARVATION_COUNT" },
+  { 9765, "XDN_ROUND_ROBIN_ARB_CTL" },
+  { 9856, "CYCLE_MODIFY" },
+  { 9857, "I_AAR" },
+  { 9984, "MPL_WORLD_ACCESS_SET_0" },
+  { 9985, "MPL_WORLD_ACCESS_SET_1" },
+  { 9986, "MPL_WORLD_ACCESS_SET_2" },
+  { 9987, "MPL_WORLD_ACCESS_SET_3" },
+  { 9988, "MPL_WORLD_ACCESS" },
+  { 9989, "DONE" },
+  { 9990, "DSTREAM_PF" },
+  { 9991, "FAIL" },
+  { 9992, "INTERRUPT_CRITICAL_SECTION" },
+  { 9993, "PASS" },
+  { 9994, "PSEUDO_RANDOM_NUMBER" },
+  { 9995, "TILE_COORD" },
+  { 9996, "TILE_RTF_HWM" },
+  { 10112, "CMPEXCH_VALUE" },
+  { 10113, "CYCLE" },
+  { 10114, "EVENT_BEGIN" },
+  { 10115, "EVENT_END" },
+  { 10116, "PROC_STATUS" },
+  { 10117, "SIM_CONTROL" },
+  { 10118, "SIM_SOCKET" },
+  { 10119, "STATUS_SATURATE" },
+  { 10240, "MPL_I_ASID_SET_0" },
+  { 10241, "MPL_I_ASID_SET_1" },
+  { 10242, "MPL_I_ASID_SET_2" },
+  { 10243, "MPL_I_ASID_SET_3" },
+  { 10244, "MPL_I_ASID" },
+  { 10245, "I_ASID" },
+  { 10496, "MPL_D_ASID_SET_0" },
+  { 10497, "MPL_D_ASID_SET_1" },
+  { 10498, "MPL_D_ASID_SET_2" },
+  { 10499, "MPL_D_ASID_SET_3" },
+  { 10500, "MPL_D_ASID" },
+  { 10501, "D_ASID" },
+  { 10752, "MPL_DOUBLE_FAULT_SET_0" },
+  { 10753, "MPL_DOUBLE_FAULT_SET_1" },
+  { 10754, "MPL_DOUBLE_FAULT_SET_2" },
+  { 10755, "MPL_DOUBLE_FAULT_SET_3" },
+  { 10756, "MPL_DOUBLE_FAULT" },
+  { 10757, "LAST_INTERRUPT_REASON" },
+};
+
+const int tilegx_num_sprs = 441;
+
+const char *
+get_tilegx_spr_name (int num)
+{
+  void *result;
+  struct tilegx_spr key;
+
+  key.number = num;
+  result = bsearch((const void *) &key, (const void *) tilegx_sprs,
+                   tilegx_num_sprs, sizeof (struct tilegx_spr),
+                   tilegx_spr_compare);
+
+  if (result == NULL)
+  {
+    return (NULL);
+  }
+  else
+  {
+    struct tilegx_spr *result_ptr = (struct tilegx_spr *) result;
+    return (result_ptr->name);
+  }
+}
+
+int
+print_insn_tilegx (unsigned char * memaddr)
+{
+  struct tilegx_decoded_instruction
+    decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE];
+  unsigned char opbuf[TILEGX_BUNDLE_SIZE_IN_BYTES];
+  int i, num_instructions, num_printed;
+  tilegx_mnemonic padding_mnemonic;
+
+  memcpy((void *)opbuf, (void *)memaddr, TILEGX_BUNDLE_SIZE_IN_BYTES);
+
+  /* Parse the instructions in the bundle. */
+  num_instructions =
+    parse_insn_tilegx (*(unsigned long long *)opbuf, (unsigned long long)memaddr, decoded);
+
+  /* Print the instructions in the bundle. */
+  printf("{ ");
+  num_printed = 0;
+
+  /* Determine which nop opcode is used for padding and should be skipped. */
+  padding_mnemonic = TILEGX_OPC_FNOP;
+  for (i = 0; i < num_instructions; i++)
+  {
+    if (!decoded[i].opcode->can_bundle)
+    {
+      /* Instructions that cannot be bundled are padded out with nops,
+         rather than fnops. Displaying them is always clutter. */
+      padding_mnemonic = TILEGX_OPC_NOP;
+      break;
+    }
+  }
+
+  for (i = 0; i < num_instructions; i++)
+  {
+    const struct tilegx_opcode *opcode = decoded[i].opcode;
+    const char *name;
+    int j;
+
+    /* Do not print out fnops, unless everything is an fnop, in
+       which case we will print out just the last one. */
+    if (opcode->mnemonic == padding_mnemonic
+        && (num_printed > 0 || i + 1 < num_instructions))
+      continue;
+
+    if (num_printed > 0)
+      printf(" ; ");
+    ++num_printed;
+
+    name = opcode->name;
+    if (name == NULL)
+      name = "<invalid>";
+    printf("%s", name);
+
+    for (j = 0; j < opcode->num_operands; j++)
+    {
+      unsigned long long num;
+      const struct tilegx_operand *op;
+      const char *spr_name;
+
+      if (j > 0)
+        printf (",");
+      printf (" ");
+
+      num = decoded[i].operand_values[j];
+
+      op = decoded[i].operands[j];
+      switch (op->type)
+      {
+      case TILEGX_OP_TYPE_REGISTER:
+        printf ("%s", tilegx_register_names[(int)num]);
+        break;
+      case TILEGX_OP_TYPE_SPR:
+        spr_name = get_tilegx_spr_name(num);
+        if (spr_name != NULL)
+          printf ("%s", spr_name);
+        else
+          printf ("%d", (int)num);
+        break;
+      case TILEGX_OP_TYPE_IMMEDIATE:
+        printf ("%d", (int)num);
+        break;
+      case TILEGX_OP_TYPE_ADDRESS:
+        printf ("0x%016llx", num);
+        break;
+      default:
+        abort ();
+      }
+    }
+  }
+  printf (" }\n");
+
+  return TILEGX_BUNDLE_SIZE_IN_BYTES;
+}
diff --git a/src/3rdparty/pcre/sljit/sljitNativeTILEGX_64.c b/src/3rdparty/pcre/sljit/sljitNativeTILEGX_64.c
new file mode 100644
index 0000000000..d0b392e7a4
--- /dev/null
+++ b/src/3rdparty/pcre/sljit/sljitNativeTILEGX_64.c
@@ -0,0 +1,2580 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2013-2013 Tilera Corporation(jiwang@tilera.com). All rights reserved.
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* TileGX architecture. */
+/* Contributed by Tilera Corporation. */
+#include "sljitNativeTILEGX-encoder.c"
+
+#define SIMM_8BIT_MAX (0x7f)
+#define SIMM_8BIT_MIN (-0x80)
+#define SIMM_16BIT_MAX (0x7fff)
+#define SIMM_16BIT_MIN (-0x8000)
+#define SIMM_17BIT_MAX (0xffff)
+#define SIMM_17BIT_MIN (-0x10000)
+#define SIMM_32BIT_MIN (-0x80000000)
+#define SIMM_32BIT_MAX (0x7fffffff)
+#define SIMM_48BIT_MIN (0x800000000000L)
+#define SIMM_48BIT_MAX (0x7fffffff0000L)
+#define IMM16(imm) ((imm) & 0xffff)
+
+#define UIMM_16BIT_MAX (0xffff)
+
+#define TMP_REG1 (SLJIT_NO_REGISTERS + 1)
+#define TMP_REG2 (SLJIT_NO_REGISTERS + 2)
+#define TMP_REG3 (SLJIT_NO_REGISTERS + 3)
+#define ADDR_TMP (SLJIT_NO_REGISTERS + 4)
+#define PIC_ADDR_REG TMP_REG2
+
+static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 5] = {
+	63, 0, 1, 2, 3, 4, 30, 31, 32, 33, 34, 54, 5, 16, 6, 7
+};
+
+#define SLJIT_LOCALS_REG_mapped 54
+#define TMP_REG1_mapped 5
+#define TMP_REG2_mapped 16
+#define TMP_REG3_mapped 6
+#define ADDR_TMP_mapped 7
+#define SLJIT_SAVED_REG1_mapped 30
+#define SLJIT_SAVED_REG2_mapped 31
+#define SLJIT_SAVED_REG3_mapped 32
+#define SLJIT_SAVED_EREG1_mapped 33
+#define SLJIT_SAVED_EREG2_mapped 34
+
+/* Flags are keept in volatile registers. */
+#define EQUAL_FLAG 8
+/* And carry flag as well. */
+#define ULESS_FLAG 9
+#define UGREATER_FLAG 10
+#define LESS_FLAG 11
+#define GREATER_FLAG 12
+#define OVERFLOW_FLAG 13
+
+#define ZERO 63
+#define RA 55
+#define TMP_EREG1 14
+#define TMP_EREG2 15
+
+#define LOAD_DATA 0x01
+#define WORD_DATA 0x00
+#define BYTE_DATA 0x02
+#define HALF_DATA 0x04
+#define INT_DATA 0x06
+#define SIGNED_DATA 0x08
+#define DOUBLE_DATA 0x10
+
+/* Separates integer and floating point registers */
+#define GPR_REG 0xf
+
+#define MEM_MASK 0x1f
+
+#define WRITE_BACK 0x00020
+#define ARG_TEST 0x00040
+#define ALT_KEEP_CACHE 0x00080
+#define CUMULATIVE_OP 0x00100
+#define LOGICAL_OP 0x00200
+#define IMM_OP 0x00400
+#define SRC2_IMM 0x00800
+
+#define UNUSED_DEST 0x01000
+#define REG_DEST 0x02000
+#define REG1_SOURCE 0x04000
+#define REG2_SOURCE 0x08000
+#define SLOW_SRC1 0x10000
+#define SLOW_SRC2 0x20000
+#define SLOW_DEST 0x40000
+
+/* Only these flags are set. UNUSED_DEST is not set when no flags should be set.
+ */
+#define CHECK_FLAGS(list) (!(flags & UNUSED_DEST) || (op & GET_FLAGS(~(list))))
+
+SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char *sljit_get_platform_name(void)
+{
+	return "TileGX" SLJIT_CPUINFO;
+}
+
+/* Length of an instruction word */
+typedef sljit_uw sljit_ins;
+
+struct jit_instr {
+	const struct tilegx_opcode* opcode; 
+	tilegx_pipeline pipe;
+	unsigned long input_registers;
+	unsigned long output_registers;
+	int operand_value[4];
+	int line;
+};
+
+/* Opcode Helper Macros */
+#define TILEGX_X_MODE 0
+
+#define X_MODE create_Mode(TILEGX_X_MODE)
+
+#define FNOP_X0 \
+	create_Opcode_X0(RRR_0_OPCODE_X0) | \
+	create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) | \
+	create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0)
+
+#define FNOP_X1 \
+	create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) | \
+	create_UnaryOpcodeExtension_X1(FNOP_UNARY_OPCODE_X1)
+
+#define NOP \
+	create_Mode(TILEGX_X_MODE) | FNOP_X0 | FNOP_X1
+
+#define ANOP_X0 \
+	create_Opcode_X0(RRR_0_OPCODE_X0) | \
+	create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) | \
+	create_UnaryOpcodeExtension_X0(NOP_UNARY_OPCODE_X0)
+
+#define BPT create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) | \
+	create_UnaryOpcodeExtension_X1(ILL_UNARY_OPCODE_X1) | \
+	create_Dest_X1(0x1C) | create_SrcA_X1(0x25) | ANOP_X0
+
+#define ADD_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(ADD_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define ADDI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(IMM8_OPCODE_X1) | \
+	create_Imm8OpcodeExtension_X1(ADDI_IMM8_OPCODE_X1) | FNOP_X0
+
+#define SUB_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(SUB_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define NOR_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(NOR_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define OR_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(OR_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define AND_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(AND_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define XOR_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(XOR_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define CMOVNEZ_X0 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X0(RRR_0_OPCODE_X0) | \
+	create_RRROpcodeExtension_X0(CMOVNEZ_RRR_0_OPCODE_X0) | FNOP_X1
+
+#define CMOVEQZ_X0 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X0(RRR_0_OPCODE_X0) | \
+	create_RRROpcodeExtension_X0(CMOVEQZ_RRR_0_OPCODE_X0) | FNOP_X1
+
+#define ADDLI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(ADDLI_OPCODE_X1) | FNOP_X0
+
+#define V4INT_L_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(V4INT_L_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define BFEXTU_X0 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X0(BF_OPCODE_X0) | \
+	create_BFOpcodeExtension_X0(BFEXTU_BF_OPCODE_X0) | FNOP_X1
+
+#define BFEXTS_X0 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X0(BF_OPCODE_X0) | \
+	create_BFOpcodeExtension_X0(BFEXTS_BF_OPCODE_X0) | FNOP_X1
+
+#define SHL16INSLI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(SHL16INSLI_OPCODE_X1) | FNOP_X0
+
+#define ST_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(ST_RRR_0_OPCODE_X1) | create_Dest_X1(0x0) | FNOP_X0
+
+#define LD_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) | \
+	create_UnaryOpcodeExtension_X1(LD_UNARY_OPCODE_X1) | FNOP_X0
+
+#define JR_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) | \
+	create_UnaryOpcodeExtension_X1(JR_UNARY_OPCODE_X1) | FNOP_X0
+
+#define JALR_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) | \
+	create_UnaryOpcodeExtension_X1(JALR_UNARY_OPCODE_X1) | FNOP_X0
+
+#define CLZ_X0 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X0(RRR_0_OPCODE_X0) | \
+	create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) | \
+	create_UnaryOpcodeExtension_X0(CNTLZ_UNARY_OPCODE_X0) | FNOP_X1
+
+#define CMPLTUI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(IMM8_OPCODE_X1) | \
+	create_Imm8OpcodeExtension_X1(CMPLTUI_IMM8_OPCODE_X1) | FNOP_X0
+
+#define CMPLTU_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(CMPLTU_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define CMPLTS_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(CMPLTS_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define XORI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(IMM8_OPCODE_X1) | \
+	create_Imm8OpcodeExtension_X1(XORI_IMM8_OPCODE_X1) | FNOP_X0
+
+#define ORI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(IMM8_OPCODE_X1) | \
+	create_Imm8OpcodeExtension_X1(ORI_IMM8_OPCODE_X1) | FNOP_X0
+
+#define ANDI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(IMM8_OPCODE_X1) | \
+	create_Imm8OpcodeExtension_X1(ANDI_IMM8_OPCODE_X1) | FNOP_X0
+
+#define SHLI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(SHIFT_OPCODE_X1) | \
+	create_ShiftOpcodeExtension_X1(SHLI_SHIFT_OPCODE_X1) | FNOP_X0
+
+#define SHL_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(SHL_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define SHRSI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(SHIFT_OPCODE_X1) | \
+	create_ShiftOpcodeExtension_X1(SHRSI_SHIFT_OPCODE_X1) | FNOP_X0
+
+#define SHRS_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(SHRS_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define SHRUI_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(SHIFT_OPCODE_X1) | \
+	create_ShiftOpcodeExtension_X1(SHRUI_SHIFT_OPCODE_X1) | FNOP_X0
+
+#define SHRU_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(RRR_0_OPCODE_X1) | \
+	create_RRROpcodeExtension_X1(SHRU_RRR_0_OPCODE_X1) | FNOP_X0
+
+#define BEQZ_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(BRANCH_OPCODE_X1) | \
+	create_BrType_X1(BEQZ_BRANCH_OPCODE_X1) | FNOP_X0
+
+#define BNEZ_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(BRANCH_OPCODE_X1) | \
+	create_BrType_X1(BNEZ_BRANCH_OPCODE_X1) | FNOP_X0
+
+#define J_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(JUMP_OPCODE_X1) | \
+	create_JumpOpcodeExtension_X1(J_JUMP_OPCODE_X1) | FNOP_X0
+
+#define JAL_X1 \
+	create_Mode(TILEGX_X_MODE) | create_Opcode_X1(JUMP_OPCODE_X1) | \
+	create_JumpOpcodeExtension_X1(JAL_JUMP_OPCODE_X1) | FNOP_X0
+
+#define DEST_X0(x) create_Dest_X0(x)
+#define SRCA_X0(x) create_SrcA_X0(x)
+#define SRCB_X0(x) create_SrcB_X0(x)
+#define DEST_X1(x) create_Dest_X1(x)
+#define SRCA_X1(x) create_SrcA_X1(x)
+#define SRCB_X1(x) create_SrcB_X1(x)
+#define IMM16_X1(x) create_Imm16_X1(x)
+#define IMM8_X1(x) create_Imm8_X1(x)
+#define BFSTART_X0(x) create_BFStart_X0(x)
+#define BFEND_X0(x) create_BFEnd_X0(x)
+#define SHIFTIMM_X1(x) create_ShAmt_X1(x)
+#define JOFF_X1(x) create_JumpOff_X1(x)
+#define BOFF_X1(x) create_BrOff_X1(x)
+
+static SLJIT_CONST tilegx_mnemonic data_transfer_insts[16] = {
+	/* u w s */ TILEGX_OPC_ST   /* st */,
+	/* u w l */ TILEGX_OPC_LD   /* ld */,
+	/* u b s */ TILEGX_OPC_ST1  /* st1 */,
+	/* u b l */ TILEGX_OPC_LD1U /* ld1u */,
+	/* u h s */ TILEGX_OPC_ST2  /* st2 */,
+	/* u h l */ TILEGX_OPC_LD2U /* ld2u */,
+	/* u i s */ TILEGX_OPC_ST4  /* st4 */,
+	/* u i l */ TILEGX_OPC_LD4U /* ld4u */,
+	/* s w s */ TILEGX_OPC_ST   /* st */,
+	/* s w l */ TILEGX_OPC_LD   /* ld */,
+	/* s b s */ TILEGX_OPC_ST1  /* st1 */,
+	/* s b l */ TILEGX_OPC_LD1S /* ld1s */,
+	/* s h s */ TILEGX_OPC_ST2  /* st2 */,
+	/* s h l */ TILEGX_OPC_LD2S /* ld2s */,
+	/* s i s */ TILEGX_OPC_ST4  /* st4 */,
+	/* s i l */ TILEGX_OPC_LD4S /* ld4s */,
+};
+
+#ifdef TILEGX_JIT_DEBUG
+static sljit_si push_inst_debug(struct sljit_compiler *compiler, sljit_ins ins, int line)
+{
+	sljit_ins *ptr = (sljit_ins *)ensure_buf(compiler, sizeof(sljit_ins));
+	FAIL_IF(!ptr);
+	*ptr = ins;
+	compiler->size++;
+	printf("|%04d|S0|:\t\t", line);
+	print_insn_tilegx(ptr);
+	return SLJIT_SUCCESS;
+}
+
+static sljit_si push_inst_nodebug(struct sljit_compiler *compiler, sljit_ins ins)
+{
+	sljit_ins *ptr = (sljit_ins *)ensure_buf(compiler, sizeof(sljit_ins));
+	FAIL_IF(!ptr);
+	*ptr = ins;
+	compiler->size++;
+	return SLJIT_SUCCESS;
+}
+
+#define push_inst(a, b) push_inst_debug(a, b, __LINE__)
+#else
+static sljit_si push_inst(struct sljit_compiler *compiler, sljit_ins ins)
+{
+	sljit_ins *ptr = (sljit_ins *)ensure_buf(compiler, sizeof(sljit_ins));
+	FAIL_IF(!ptr);
+	*ptr = ins;
+	compiler->size++;
+	return SLJIT_SUCCESS;
+}
+#endif
+
+#define BUNDLE_FORMAT_MASK(p0, p1, p2) \
+	((p0) | ((p1) << 8) | ((p2) << 16))
+
+#define BUNDLE_FORMAT(p0, p1, p2) \
+	{ \
+		{ \
+			(tilegx_pipeline)(p0), \
+			(tilegx_pipeline)(p1), \
+			(tilegx_pipeline)(p2) \
+		}, \
+		BUNDLE_FORMAT_MASK(1 << (p0), 1 << (p1), (1 << (p2))) \
+	}
+
+#define NO_PIPELINE TILEGX_NUM_PIPELINE_ENCODINGS
+
+#define tilegx_is_x_pipeline(p) ((int)(p) <= (int)TILEGX_PIPELINE_X1)
+
+#define PI(encoding) \
+	push_inst(compiler, encoding)
+
+#define PB3(opcode, dst, srca, srcb) \
+	push_3_buffer(compiler, opcode, dst, srca, srcb, __LINE__)
+
+#define PB2(opcode, dst, src) \
+	push_2_buffer(compiler, opcode, dst, src, __LINE__)
+
+#define JR(reg) \
+	push_jr_buffer(compiler, TILEGX_OPC_JR, reg, __LINE__)
+
+#define ADD(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_ADD, dst, srca, srcb, __LINE__)
+
+#define SUB(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_SUB, dst, srca, srcb, __LINE__)
+
+#define NOR(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_NOR, dst, srca, srcb, __LINE__)
+
+#define OR(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_OR, dst, srca, srcb, __LINE__)
+
+#define XOR(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_XOR, dst, srca, srcb, __LINE__)
+
+#define AND(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_AND, dst, srca, srcb, __LINE__)
+
+#define CLZ(dst, src) \
+	push_2_buffer(compiler, TILEGX_OPC_CLZ, dst, src, __LINE__)
+
+#define SHLI(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_SHLI, dst, srca, srcb, __LINE__)
+
+#define SHRUI(dst, srca, imm) \
+	push_3_buffer(compiler, TILEGX_OPC_SHRUI, dst, srca, imm, __LINE__)
+
+#define XORI(dst, srca, imm) \
+	push_3_buffer(compiler, TILEGX_OPC_XORI, dst, srca, imm, __LINE__)
+
+#define ORI(dst, srca, imm) \
+	push_3_buffer(compiler, TILEGX_OPC_ORI, dst, srca, imm, __LINE__)
+
+#define CMPLTU(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_CMPLTU, dst, srca, srcb, __LINE__)
+
+#define CMPLTS(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_CMPLTS, dst, srca, srcb, __LINE__)
+
+#define CMPLTUI(dst, srca, imm) \
+	push_3_buffer(compiler, TILEGX_OPC_CMPLTUI, dst, srca, imm, __LINE__)
+
+#define CMOVNEZ(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_CMOVNEZ, dst, srca, srcb, __LINE__)
+
+#define CMOVEQZ(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_CMOVEQZ, dst, srca, srcb, __LINE__)
+
+#define ADDLI(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_ADDLI, dst, srca, srcb, __LINE__)
+
+#define SHL16INSLI(dst, srca, srcb) \
+	push_3_buffer(compiler, TILEGX_OPC_SHL16INSLI, dst, srca, srcb, __LINE__)
+
+#define LD_ADD(dst, addr, adjust) \
+	push_3_buffer(compiler, TILEGX_OPC_LD_ADD, dst, addr, adjust, __LINE__)
+
+#define ST_ADD(src, addr, adjust) \
+	push_3_buffer(compiler, TILEGX_OPC_ST_ADD, src, addr, adjust, __LINE__)
+
+#define LD(dst, addr) \
+	push_2_buffer(compiler, TILEGX_OPC_LD, dst, addr, __LINE__)
+
+#define BFEXTU(dst, src, start, end) \
+	push_4_buffer(compiler, TILEGX_OPC_BFEXTU, dst, src, start, end, __LINE__)
+
+#define BFEXTS(dst, src, start, end) \
+	push_4_buffer(compiler, TILEGX_OPC_BFEXTS, dst, src, start, end, __LINE__)
+
+#define ADD_SOLO(dest, srca, srcb) \
+	push_inst(compiler, ADD_X1 | DEST_X1(dest) | SRCA_X1(srca) | SRCB_X1(srcb))
+
+#define ADDI_SOLO(dest, srca, imm) \
+	push_inst(compiler, ADDI_X1 | DEST_X1(dest) | SRCA_X1(srca) | IMM8_X1(imm))
+
+#define ADDLI_SOLO(dest, srca, imm) \
+	push_inst(compiler, ADDLI_X1 | DEST_X1(dest) | SRCA_X1(srca) | IMM16_X1(imm))
+
+#define SHL16INSLI_SOLO(dest, srca, imm) \
+	push_inst(compiler, SHL16INSLI_X1 | DEST_X1(dest) | SRCA_X1(srca) | IMM16_X1(imm))
+
+#define JALR_SOLO(reg) \
+	push_inst(compiler, JALR_X1 | SRCA_X1(reg))
+
+#define JR_SOLO(reg) \
+	push_inst(compiler, JR_X1 | SRCA_X1(reg))
+
+struct Format {
+	/* Mapping of bundle issue slot to assigned pipe. */
+	tilegx_pipeline pipe[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE];
+
+	/* Mask of pipes used by this bundle. */
+	unsigned int pipe_mask;
+};
+
+const struct Format formats[] =
+{
+	/* In Y format we must always have something in Y2, since it has
+	* no fnop, so this conveys that Y2 must always be used. */
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y0, TILEGX_PIPELINE_Y2, NO_PIPELINE),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y1, TILEGX_PIPELINE_Y2, NO_PIPELINE),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y2, TILEGX_PIPELINE_Y0, NO_PIPELINE),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y2, TILEGX_PIPELINE_Y1, NO_PIPELINE),
+
+	/* Y format has three instructions. */
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y0, TILEGX_PIPELINE_Y1, TILEGX_PIPELINE_Y2),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y0, TILEGX_PIPELINE_Y2, TILEGX_PIPELINE_Y1),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y1, TILEGX_PIPELINE_Y0, TILEGX_PIPELINE_Y2),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y1, TILEGX_PIPELINE_Y2, TILEGX_PIPELINE_Y0),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y2, TILEGX_PIPELINE_Y0, TILEGX_PIPELINE_Y1),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_Y2, TILEGX_PIPELINE_Y1, TILEGX_PIPELINE_Y0),
+
+	/* X format has only two instructions. */
+	BUNDLE_FORMAT(TILEGX_PIPELINE_X0, TILEGX_PIPELINE_X1, NO_PIPELINE),
+	BUNDLE_FORMAT(TILEGX_PIPELINE_X1, TILEGX_PIPELINE_X0, NO_PIPELINE)
+};
+
+
+struct jit_instr inst_buf[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE];
+unsigned long inst_buf_index;
+
+tilegx_pipeline get_any_valid_pipe(const struct tilegx_opcode* opcode)
+{
+	/* FIXME: tile: we could pregenerate this. */
+	int pipe;
+	for (pipe = 0; ((opcode->pipes & (1 << pipe)) == 0 && pipe < TILEGX_NUM_PIPELINE_ENCODINGS); pipe++)
+		;
+	return (tilegx_pipeline)(pipe);
+}
+
+void insert_nop(tilegx_mnemonic opc, int line)
+{
+	const struct tilegx_opcode* opcode = NULL;
+
+	memmove(&inst_buf[1], &inst_buf[0], inst_buf_index * sizeof inst_buf[0]);
+
+	opcode = &tilegx_opcodes[opc];
+	inst_buf[0].opcode = opcode;
+	inst_buf[0].pipe = get_any_valid_pipe(opcode);
+	inst_buf[0].input_registers = 0;
+	inst_buf[0].output_registers = 0;
+	inst_buf[0].line = line;
+	++inst_buf_index;
+}
+
+const struct Format* compute_format()
+{
+	unsigned int compatible_pipes = BUNDLE_FORMAT_MASK(
+		inst_buf[0].opcode->pipes,
+		inst_buf[1].opcode->pipes,
+		(inst_buf_index == 3 ? inst_buf[2].opcode->pipes : (1 << NO_PIPELINE)));
+
+	const struct Format* match = NULL;
+	const struct Format *b = NULL;
+	unsigned int i = 0;
+	for (i; i < sizeof formats / sizeof formats[0]; i++) {
+		b = &formats[i];
+		if ((b->pipe_mask & compatible_pipes) == b->pipe_mask) {
+			match = b;
+			break;
+		}
+	}
+
+	return match;
+}
+
+sljit_si assign_pipes()
+{
+	unsigned long output_registers = 0;
+	unsigned int i = 0;
+
+	if (inst_buf_index == 1) {
+		tilegx_mnemonic opc = inst_buf[0].opcode->can_bundle
+					? TILEGX_OPC_FNOP : TILEGX_OPC_NOP;
+		insert_nop(opc, __LINE__);
+	}
+
+	const struct Format* match = compute_format();
+
+	if (match == NULL)
+		return -1;
+
+	for (i = 0; i < inst_buf_index; i++) {
+
+		if ((i > 0) && ((inst_buf[i].input_registers & output_registers) != 0))
+			return -1;
+
+		if ((i > 0) && ((inst_buf[i].output_registers & output_registers) != 0))
+			return -1;
+
+		/* Don't include Rzero in the match set, to avoid triggering
+		   needlessly on 'prefetch' instrs. */
+
+		output_registers |= inst_buf[i].output_registers & 0xFFFFFFFFFFFFFFL;
+
+		inst_buf[i].pipe = match->pipe[i];
+	}
+
+	/* If only 2 instrs, and in Y-mode, insert a nop. */
+	if (inst_buf_index == 2 && !tilegx_is_x_pipeline(match->pipe[0])) {
+		insert_nop(TILEGX_OPC_FNOP, __LINE__);
+
+		/* Select the yet unassigned pipe. */
+		tilegx_pipeline pipe = (tilegx_pipeline)(((TILEGX_PIPELINE_Y0
+					+ TILEGX_PIPELINE_Y1 + TILEGX_PIPELINE_Y2)
+					- (inst_buf[1].pipe + inst_buf[2].pipe)));
+
+		inst_buf[0].pipe = pipe;
+	}
+
+	return 0;
+}
+
+tilegx_bundle_bits get_bundle_bit(struct jit_instr *inst)
+{
+	int i, val;
+	const struct tilegx_opcode* opcode = inst->opcode;
+	tilegx_bundle_bits bits = opcode->fixed_bit_values[inst->pipe];
+
+	const struct tilegx_operand* operand = NULL;
+	for (i = 0; i < opcode->num_operands; i++) {
+		operand = &tilegx_operands[opcode->operands[inst->pipe][i]];
+		val = inst->operand_value[i];
+
+		bits |= operand->insert(val);
+	}
+
+	return bits;
+}
+
+static sljit_si update_buffer(struct sljit_compiler *compiler)
+{
+	int count;
+	int i;
+	int orig_index = inst_buf_index;
+	struct jit_instr inst0 = inst_buf[0];
+	struct jit_instr inst1 = inst_buf[1];
+	struct jit_instr inst2 = inst_buf[2];
+	tilegx_bundle_bits bits = 0;
+
+	/* If the bundle is valid as is, perform the encoding and return 1. */
+	if (assign_pipes() == 0) {
+		for (i = 0; i < inst_buf_index; i++) {
+			bits |= get_bundle_bit(inst_buf + i);
+#ifdef TILEGX_JIT_DEBUG
+			printf("|%04d", inst_buf[i].line);
+#endif
+		}
+#ifdef TILEGX_JIT_DEBUG
+		if (inst_buf_index == 3)
+			printf("|M0|:\t");
+		else
+			printf("|M0|:\t\t");
+		print_insn_tilegx(&bits);
+#endif
+
+		inst_buf_index = 0;
+
+#ifdef TILEGX_JIT_DEBUG
+		return push_inst_nodebug(compiler, bits);
+#else
+		return push_inst(compiler, bits);
+#endif
+	}
+
+	/* If the bundle is invalid, split it in two. First encode the first two
+	   (or possibly 1) instructions, and then the last, separately. Note that
+	   assign_pipes may have re-ordered the instrs (by inserting no-ops in
+	   lower slots) so we need to reset them. */
+
+	inst_buf_index = orig_index - 1;
+	inst_buf[0] = inst0;
+	inst_buf[1] = inst1;
+	inst_buf[2] = inst2;
+	if (assign_pipes() == 0) {
+		for (i = 0; i < inst_buf_index; i++) {
+			bits |= get_bundle_bit(inst_buf + i);
+#ifdef TILEGX_JIT_DEBUG
+			printf("|%04d", inst_buf[i].line);
+#endif
+		}
+
+#ifdef TILEGX_JIT_DEBUG
+		if (inst_buf_index == 3)
+			printf("|M1|:\t");
+		else
+			printf("|M1|:\t\t");
+		print_insn_tilegx(&bits);
+#endif
+
+		if ((orig_index - 1) == 2) {
+			inst_buf[0] = inst2;
+			inst_buf_index = 1;
+		} else if ((orig_index - 1) == 1) {
+			inst_buf[0] = inst1;
+			inst_buf_index = 1;
+		} else
+			SLJIT_ASSERT_STOP();
+
+#ifdef TILEGX_JIT_DEBUG
+		return push_inst_nodebug(compiler, bits);
+#else
+		return push_inst(compiler, bits);
+#endif
+	} else {
+		/* We had 3 instrs of which the first 2 can't live in the same bundle.
+		   Split those two. Note that we don't try to then combine the second
+		   and third instr into a single bundle.  First instruction: */
+		inst_buf_index = 1;
+		inst_buf[0] = inst0;
+		inst_buf[1] = inst1;
+		inst_buf[2] = inst2;
+		if (assign_pipes() == 0) {
+			for (i = 0; i < inst_buf_index; i++) {
+				bits |= get_bundle_bit(inst_buf + i);
+#ifdef TILEGX_JIT_DEBUG
+				printf("|%04d", inst_buf[i].line);
+#endif
+			}
+
+#ifdef TILEGX_JIT_DEBUG
+			if (inst_buf_index == 3)
+				printf("|M2|:\t");
+			else
+				printf("|M2|:\t\t");
+			print_insn_tilegx(&bits);
+#endif
+
+			inst_buf[0] = inst1;
+			inst_buf[1] = inst2;
+			inst_buf_index = orig_index - 1;
+#ifdef TILEGX_JIT_DEBUG
+			return push_inst_nodebug(compiler, bits);
+#else
+			return push_inst(compiler, bits);
+#endif
+		} else
+			SLJIT_ASSERT_STOP();
+	}
+
+	SLJIT_ASSERT_STOP();
+}
+
+static sljit_si flush_buffer(struct sljit_compiler *compiler)
+{
+	while (inst_buf_index != 0)
+		update_buffer(compiler);
+}
+
+static sljit_si push_4_buffer(struct sljit_compiler *compiler, tilegx_mnemonic opc, int op0, int op1, int op2, int op3, int line)
+{
+	if (inst_buf_index == TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE)
+		FAIL_IF(update_buffer(compiler));
+
+	const struct tilegx_opcode* opcode = &tilegx_opcodes[opc];
+	inst_buf[inst_buf_index].opcode = opcode;
+	inst_buf[inst_buf_index].pipe = get_any_valid_pipe(opcode);
+	inst_buf[inst_buf_index].operand_value[0] = op0;
+	inst_buf[inst_buf_index].operand_value[1] = op1;
+	inst_buf[inst_buf_index].operand_value[2] = op2;
+	inst_buf[inst_buf_index].operand_value[3] = op3;
+	inst_buf[inst_buf_index].input_registers = 1L << op1;
+	inst_buf[inst_buf_index].output_registers = 1L << op0;
+	inst_buf[inst_buf_index].line = line;
+	inst_buf_index++;
+
+	return SLJIT_SUCCESS;
+}
+
+static sljit_si push_3_buffer(struct sljit_compiler *compiler, tilegx_mnemonic opc, int op0, int op1, int op2, int line)
+{
+	if (inst_buf_index == TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE)
+		FAIL_IF(update_buffer(compiler));
+
+	const struct tilegx_opcode* opcode = &tilegx_opcodes[opc];
+	inst_buf[inst_buf_index].opcode = opcode;
+	inst_buf[inst_buf_index].pipe = get_any_valid_pipe(opcode);
+	inst_buf[inst_buf_index].operand_value[0] = op0;
+	inst_buf[inst_buf_index].operand_value[1] = op1;
+	inst_buf[inst_buf_index].operand_value[2] = op2;
+	inst_buf[inst_buf_index].line = line;
+
+	switch (opc) {
+	case TILEGX_OPC_ST_ADD:
+		inst_buf[inst_buf_index].input_registers = (1L << op0) | (1L << op1);
+		inst_buf[inst_buf_index].output_registers = 1L << op0;
+		break;
+	case TILEGX_OPC_LD_ADD:
+		inst_buf[inst_buf_index].input_registers = 1L << op1;
+		inst_buf[inst_buf_index].output_registers = (1L << op0) | (1L << op1);
+		break;
+	case TILEGX_OPC_ADD:
+	case TILEGX_OPC_AND:
+	case TILEGX_OPC_SUB:
+	case TILEGX_OPC_OR:
+	case TILEGX_OPC_XOR:
+	case TILEGX_OPC_NOR:
+	case TILEGX_OPC_SHL:
+	case TILEGX_OPC_SHRU:
+	case TILEGX_OPC_SHRS:
+	case TILEGX_OPC_CMPLTU:
+	case TILEGX_OPC_CMPLTS:
+	case TILEGX_OPC_CMOVEQZ:
+	case TILEGX_OPC_CMOVNEZ:
+		inst_buf[inst_buf_index].input_registers = (1L << op1) | (1L << op2);
+		inst_buf[inst_buf_index].output_registers = 1L << op0;
+		break;
+	case TILEGX_OPC_ADDLI:
+	case TILEGX_OPC_XORI:
+	case TILEGX_OPC_ORI:
+	case TILEGX_OPC_SHLI:
+	case TILEGX_OPC_SHRUI:
+	case TILEGX_OPC_SHRSI:
+	case TILEGX_OPC_SHL16INSLI:
+	case TILEGX_OPC_CMPLTUI:
+	case TILEGX_OPC_CMPLTSI:
+		inst_buf[inst_buf_index].input_registers = 1L << op1;
+		inst_buf[inst_buf_index].output_registers = 1L << op0;
+		break;
+	default:
+		printf("unrecoginzed opc: %s\n", opcode->name);
+		SLJIT_ASSERT_STOP();
+	}
+
+	inst_buf_index++;
+
+	return SLJIT_SUCCESS;
+}
+
+static sljit_si push_2_buffer(struct sljit_compiler *compiler, tilegx_mnemonic opc, int op0, int op1, int line)
+{
+	if (inst_buf_index == TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE)
+		FAIL_IF(update_buffer(compiler));
+
+	const struct tilegx_opcode* opcode = &tilegx_opcodes[opc];
+	inst_buf[inst_buf_index].opcode = opcode;
+	inst_buf[inst_buf_index].pipe = get_any_valid_pipe(opcode);
+	inst_buf[inst_buf_index].operand_value[0] = op0;
+	inst_buf[inst_buf_index].operand_value[1] = op1;
+	inst_buf[inst_buf_index].line = line;
+
+	switch (opc) {
+	case TILEGX_OPC_BEQZ:
+	case TILEGX_OPC_BNEZ:
+		inst_buf[inst_buf_index].input_registers = 1L << op0;
+		break;
+	case TILEGX_OPC_ST:
+	case TILEGX_OPC_ST1:
+	case TILEGX_OPC_ST2:
+	case TILEGX_OPC_ST4:
+		inst_buf[inst_buf_index].input_registers = (1L << op0) | (1L << op1);
+		inst_buf[inst_buf_index].output_registers = 0;
+		break;
+	case TILEGX_OPC_CLZ:
+	case TILEGX_OPC_LD:
+	case TILEGX_OPC_LD1U:
+	case TILEGX_OPC_LD1S:
+	case TILEGX_OPC_LD2U:
+	case TILEGX_OPC_LD2S:
+	case TILEGX_OPC_LD4U:
+	case TILEGX_OPC_LD4S:
+		inst_buf[inst_buf_index].input_registers = 1L << op1;
+		inst_buf[inst_buf_index].output_registers = 1L << op0;
+		break;
+	default:
+		printf("unrecoginzed opc: %s\n", opcode->name);
+		SLJIT_ASSERT_STOP();
+	}
+
+	inst_buf_index++;
+
+	return SLJIT_SUCCESS;
+}
+
+static sljit_si push_0_buffer(struct sljit_compiler *compiler, tilegx_mnemonic opc, int line)
+{
+	if (inst_buf_index == TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE)
+		FAIL_IF(update_buffer(compiler));
+
+	const struct tilegx_opcode* opcode = &tilegx_opcodes[opc];
+	inst_buf[inst_buf_index].opcode = opcode;
+	inst_buf[inst_buf_index].pipe = get_any_valid_pipe(opcode);
+	inst_buf[inst_buf_index].input_registers = 0;
+	inst_buf[inst_buf_index].output_registers = 0;
+	inst_buf[inst_buf_index].line = line;
+	inst_buf_index++;
+
+	return SLJIT_SUCCESS;
+}
+
+static sljit_si push_jr_buffer(struct sljit_compiler *compiler, tilegx_mnemonic opc, int op0, int line)
+{
+	if (inst_buf_index == TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE)
+		FAIL_IF(update_buffer(compiler));
+
+	const struct tilegx_opcode* opcode = &tilegx_opcodes[opc];
+	inst_buf[inst_buf_index].opcode = opcode;
+	inst_buf[inst_buf_index].pipe = get_any_valid_pipe(opcode);
+	inst_buf[inst_buf_index].operand_value[0] = op0;
+	inst_buf[inst_buf_index].input_registers = 1L << op0;
+	inst_buf[inst_buf_index].output_registers = 0;
+	inst_buf[inst_buf_index].line = line;
+	inst_buf_index++;
+ 
+	return flush_buffer(compiler);
+}
+
+static SLJIT_INLINE sljit_ins * detect_jump_type(struct sljit_jump *jump, sljit_ins *code_ptr, sljit_ins *code)
+{
+	sljit_sw diff;
+	sljit_uw target_addr;
+	sljit_ins *inst;
+	sljit_ins saved_inst;
+
+	if (jump->flags & SLJIT_REWRITABLE_JUMP)
+		return code_ptr;
+
+	if (jump->flags & JUMP_ADDR)
+		target_addr = jump->u.target;
+	else {
+		SLJIT_ASSERT(jump->flags & JUMP_LABEL);
+		target_addr = (sljit_uw)(code + jump->u.label->size);
+	}
+
+	inst = (sljit_ins *)jump->addr;
+	if (jump->flags & IS_COND)
+		inst--;
+
+	diff = ((sljit_sw) target_addr - (sljit_sw) inst) >> 3;
+	if (diff <= SIMM_17BIT_MAX && diff >= SIMM_17BIT_MIN) {
+		jump->flags |= PATCH_B;
+
+		if (!(jump->flags & IS_COND)) {
+			if (jump->flags & IS_JAL) {
+				jump->flags &= ~(PATCH_B);
+				jump->flags |= PATCH_J;
+				inst[0] = JAL_X1;
+
+#ifdef TILEGX_JIT_DEBUG
+				printf("[runtime relocate]%04d:\t", __LINE__);
+				print_insn_tilegx(inst);
+#endif
+			} else {
+				inst[0] = BEQZ_X1 | SRCA_X1(ZERO);
+
+#ifdef TILEGX_JIT_DEBUG
+				printf("[runtime relocate]%04d:\t", __LINE__);
+				print_insn_tilegx(inst);
+#endif
+			}
+
+			return inst;
+		}
+
+		inst[0] = inst[0] ^ (0x7L << 55);
+
+#ifdef TILEGX_JIT_DEBUG
+		printf("[runtime relocate]%04d:\t", __LINE__);
+		print_insn_tilegx(inst);
+#endif
+		jump->addr -= sizeof(sljit_ins);
+		return inst;
+	}
+
+	if (jump->flags & IS_COND) {
+		if ((target_addr & ~0x3FFFFFFFL) == ((jump->addr + sizeof(sljit_ins)) & ~0x3FFFFFFFL)) {
+			jump->flags |= PATCH_J;
+			inst[0] = (inst[0] & ~(BOFF_X1(-1))) | BOFF_X1(2);
+			inst[1] = J_X1;
+			return inst + 1;
+		}
+
+		return code_ptr;
+	}
+
+	if ((target_addr & ~0x3FFFFFFFL) == ((jump->addr + sizeof(sljit_ins)) & ~0x3FFFFFFFL)) {
+		jump->flags |= PATCH_J;
+
+		if (jump->flags & IS_JAL) {
+			inst[0] = JAL_X1;
+
+#ifdef TILEGX_JIT_DEBUG
+			printf("[runtime relocate]%04d:\t", __LINE__);
+			print_insn_tilegx(inst);
+#endif
+
+		} else {
+			inst[0] = J_X1;
+
+#ifdef TILEGX_JIT_DEBUG
+			printf("[runtime relocate]%04d:\t", __LINE__);
+			print_insn_tilegx(inst);
+#endif
+		}
+
+		return inst;
+	}
+
+	return code_ptr;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void * sljit_generate_code(struct sljit_compiler *compiler)
+{
+	struct sljit_memory_fragment *buf;
+	sljit_ins *code;
+	sljit_ins *code_ptr;
+	sljit_ins *buf_ptr;
+	sljit_ins *buf_end;
+	sljit_uw word_count;
+	sljit_uw addr;
+
+	struct sljit_label *label;
+	struct sljit_jump *jump;
+	struct sljit_const *const_;
+
+	CHECK_ERROR_PTR();
+	check_sljit_generate_code(compiler);
+	reverse_buf(compiler);
+
+	code = (sljit_ins *)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
+	PTR_FAIL_WITH_EXEC_IF(code);
+	buf = compiler->buf;
+
+	code_ptr = code;
+	word_count = 0;
+	label = compiler->labels;
+	jump = compiler->jumps;
+	const_ = compiler->consts;
+	do {
+		buf_ptr = (sljit_ins *)buf->memory;
+		buf_end = buf_ptr + (buf->used_size >> 3);
+		do {
+			*code_ptr = *buf_ptr++;
+			SLJIT_ASSERT(!label || label->size >= word_count);
+			SLJIT_ASSERT(!jump || jump->addr >= word_count);
+			SLJIT_ASSERT(!const_ || const_->addr >= word_count);
+			/* These structures are ordered by their address. */
+			if (label && label->size == word_count) {
+				/* Just recording the address. */
+				label->addr = (sljit_uw) code_ptr;
+				label->size = code_ptr - code;
+				label = label->next;
+			}
+
+			if (jump && jump->addr == word_count) {
+				if (jump->flags & IS_JAL)
+					jump->addr = (sljit_uw)(code_ptr - 4);
+				else
+					jump->addr = (sljit_uw)(code_ptr - 3);
+
+				code_ptr = detect_jump_type(jump, code_ptr, code);
+				jump = jump->next;
+			}
+
+			if (const_ && const_->addr == word_count) {
+				/* Just recording the address. */
+				const_->addr = (sljit_uw) code_ptr;
+				const_ = const_->next;
+			}
+
+			code_ptr++;
+			word_count++;
+		} while (buf_ptr < buf_end);
+
+		buf = buf->next;
+	} while (buf);
+
+	if (label && label->size == word_count) {
+		label->addr = (sljit_uw) code_ptr;
+		label->size = code_ptr - code;
+		label = label->next;
+	}
+
+	SLJIT_ASSERT(!label);
+	SLJIT_ASSERT(!jump);
+	SLJIT_ASSERT(!const_);
+	SLJIT_ASSERT(code_ptr - code <= (sljit_sw)compiler->size);
+
+	jump = compiler->jumps;
+	while (jump) {
+		do {
+			addr = (jump->flags & JUMP_LABEL) ? jump->u.label->addr : jump->u.target;
+			buf_ptr = (sljit_ins *)jump->addr;
+
+			if (jump->flags & PATCH_B) {
+				addr = (sljit_sw)(addr - (jump->addr)) >> 3;
+				SLJIT_ASSERT((sljit_sw) addr <= SIMM_17BIT_MAX && (sljit_sw) addr >= SIMM_17BIT_MIN);
+				buf_ptr[0] = (buf_ptr[0] & ~(BOFF_X1(-1))) | BOFF_X1(addr);
+
+#ifdef TILEGX_JIT_DEBUG
+				printf("[runtime relocate]%04d:\t", __LINE__);
+				print_insn_tilegx(buf_ptr);
+#endif
+				break;
+			}
+
+			if (jump->flags & PATCH_J) {
+				SLJIT_ASSERT((addr & ~0x3FFFFFFFL) == ((jump->addr + sizeof(sljit_ins)) & ~0x3FFFFFFFL));
+				addr = (sljit_sw)(addr - (jump->addr)) >> 3;
+				buf_ptr[0] = (buf_ptr[0] & ~(JOFF_X1(-1))) | JOFF_X1(addr);
+
+#ifdef TILEGX_JIT_DEBUG
+				printf("[runtime relocate]%04d:\t", __LINE__);
+				print_insn_tilegx(buf_ptr);
+#endif
+				break;
+			}
+
+			SLJIT_ASSERT(!(jump->flags & IS_JAL));
+
+			/* Set the fields of immediate loads. */
+			buf_ptr[0] = (buf_ptr[0] & ~(0xFFFFL << 43)) | (((addr >> 32) & 0xFFFFL) << 43);
+			buf_ptr[1] = (buf_ptr[1] & ~(0xFFFFL << 43)) | (((addr >> 16) & 0xFFFFL) << 43);
+			buf_ptr[2] = (buf_ptr[2] & ~(0xFFFFL << 43)) | ((addr & 0xFFFFL) << 43);
+		} while (0);
+
+		jump = jump->next;
+	}
+
+	compiler->error = SLJIT_ERR_COMPILED;
+	compiler->executable_size = (code_ptr - code) * sizeof(sljit_ins);
+	SLJIT_CACHE_FLUSH(code, code_ptr);
+	return code;
+}
+
+static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst_ar, sljit_sw imm)
+{
+
+	if (imm <= SIMM_16BIT_MAX && imm >= SIMM_16BIT_MIN)
+		return ADDLI(dst_ar, ZERO, imm);
+
+	if (imm <= SIMM_32BIT_MAX && imm >= SIMM_32BIT_MIN) {
+		FAIL_IF(ADDLI(dst_ar, ZERO, imm >> 16));
+		return SHL16INSLI(dst_ar, dst_ar, imm);
+	}
+
+	if (imm <= SIMM_48BIT_MAX && imm >= SIMM_48BIT_MIN) {
+		FAIL_IF(ADDLI(dst_ar, ZERO, imm >> 32));
+		FAIL_IF(SHL16INSLI(dst_ar, dst_ar, imm >> 16));
+		return SHL16INSLI(dst_ar, dst_ar, imm);
+	}
+
+	FAIL_IF(ADDLI(dst_ar, ZERO, imm >> 48));
+	FAIL_IF(SHL16INSLI(dst_ar, dst_ar, imm >> 32));
+	FAIL_IF(SHL16INSLI(dst_ar, dst_ar, imm >> 16));
+	return SHL16INSLI(dst_ar, dst_ar, imm);
+}
+
+static sljit_si emit_const(struct sljit_compiler *compiler, sljit_si dst_ar, sljit_sw imm, int flush)
+{
+	/* Should *not* be optimized as load_immediate, as pcre relocation
+	   mechanism will match this fixed 4-instruction pattern. */
+	if (flush) {
+		FAIL_IF(ADDLI_SOLO(dst_ar, ZERO, imm >> 32));
+		FAIL_IF(SHL16INSLI_SOLO(dst_ar, dst_ar, imm >> 16));
+		return SHL16INSLI_SOLO(dst_ar, dst_ar, imm);
+	}
+
+	FAIL_IF(ADDLI(dst_ar, ZERO, imm >> 32));
+	FAIL_IF(SHL16INSLI(dst_ar, dst_ar, imm >> 16));
+	return SHL16INSLI(dst_ar, dst_ar, imm);
+}
+
+static sljit_si emit_const_64(struct sljit_compiler *compiler, sljit_si dst_ar, sljit_sw imm, int flush)
+{
+	/* Should *not* be optimized as load_immediate, as pcre relocation
+	   mechanism will match this fixed 4-instruction pattern. */
+	if (flush) {
+		FAIL_IF(ADDLI_SOLO(reg_map[dst_ar], ZERO, imm >> 48));
+		FAIL_IF(SHL16INSLI_SOLO(reg_map[dst_ar], reg_map[dst_ar], imm >> 32));
+		FAIL_IF(SHL16INSLI_SOLO(reg_map[dst_ar], reg_map[dst_ar], imm >> 16));
+		return SHL16INSLI_SOLO(reg_map[dst_ar], reg_map[dst_ar], imm);
+	}
+
+	FAIL_IF(ADDLI(reg_map[dst_ar], ZERO, imm >> 48));
+	FAIL_IF(SHL16INSLI(reg_map[dst_ar], reg_map[dst_ar], imm >> 32));
+	FAIL_IF(SHL16INSLI(reg_map[dst_ar], reg_map[dst_ar], imm >> 16));
+	return SHL16INSLI(reg_map[dst_ar], reg_map[dst_ar], imm);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compiler, sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size)
+{
+	sljit_ins base;
+	sljit_ins bundle = 0;
+
+	CHECK_ERROR();
+	check_sljit_emit_enter(compiler, args, scratches, saveds, local_size);
+
+	compiler->scratches = scratches;
+	compiler->saveds = saveds;
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	compiler->logical_local_size = local_size;
+#endif
+
+	local_size += (saveds + 1) * sizeof(sljit_sw);
+	local_size = (local_size + 7) & ~7;
+	compiler->local_size = local_size;
+
+	if (local_size <= SIMM_16BIT_MAX) {
+		/* Frequent case. */
+		FAIL_IF(ADDLI(SLJIT_LOCALS_REG_mapped, SLJIT_LOCALS_REG_mapped, -local_size));
+		base = SLJIT_LOCALS_REG_mapped;
+	} else {
+		FAIL_IF(load_immediate(compiler, TMP_REG1_mapped, local_size));
+		FAIL_IF(ADD(TMP_REG2_mapped, SLJIT_LOCALS_REG_mapped, ZERO));
+		FAIL_IF(SUB(SLJIT_LOCALS_REG_mapped, SLJIT_LOCALS_REG_mapped, TMP_REG1_mapped));
+		base = TMP_REG2_mapped;
+		local_size = 0;
+	}
+
+	FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 8));
+	FAIL_IF(ST_ADD(ADDR_TMP_mapped, RA, -8));
+
+	if (saveds >= 1)
+		FAIL_IF(ST_ADD(ADDR_TMP_mapped, SLJIT_SAVED_REG1_mapped, -8));
+
+	if (saveds >= 2)
+		FAIL_IF(ST_ADD(ADDR_TMP_mapped, SLJIT_SAVED_REG2_mapped, -8));
+
+	if (saveds >= 3)
+		FAIL_IF(ST_ADD(ADDR_TMP_mapped, SLJIT_SAVED_REG3_mapped, -8));
+
+	if (saveds >= 4)
+		FAIL_IF(ST_ADD(ADDR_TMP_mapped, SLJIT_SAVED_EREG1_mapped, -8));
+
+	if (saveds >= 5)
+		FAIL_IF(ST_ADD(ADDR_TMP_mapped, SLJIT_SAVED_EREG2_mapped, -8));
+
+	if (args >= 1)
+		FAIL_IF(ADD(SLJIT_SAVED_REG1_mapped, 0, ZERO));
+
+	if (args >= 2)
+		FAIL_IF(ADD(SLJIT_SAVED_REG2_mapped, 1, ZERO));
+
+	if (args >= 3)
+		FAIL_IF(ADD(SLJIT_SAVED_REG3_mapped, 2, ZERO));
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler, sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size)
+{
+	CHECK_ERROR_VOID();
+	check_sljit_set_context(compiler, args, scratches, saveds, local_size);
+
+	compiler->scratches = scratches;
+	compiler->saveds = saveds;
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	compiler->logical_local_size = local_size;
+#endif
+
+	local_size += (saveds + 1) * sizeof(sljit_sw);
+	compiler->local_size = (local_size + 7) & ~7;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
+{
+	sljit_si local_size;
+	sljit_ins base;
+	int addr_initialized = 0;
+
+	CHECK_ERROR();
+	check_sljit_emit_return(compiler, op, src, srcw);
+
+	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
+
+	local_size = compiler->local_size;
+	if (local_size <= SIMM_16BIT_MAX)
+		base = SLJIT_LOCALS_REG_mapped;
+	else {
+		FAIL_IF(load_immediate(compiler, TMP_REG1_mapped, local_size));
+		FAIL_IF(ADD(TMP_REG1_mapped, SLJIT_LOCALS_REG_mapped, TMP_REG1_mapped));
+		base = TMP_REG1_mapped;
+		local_size = 0;
+	}
+
+	FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 8));
+	FAIL_IF(LD(RA, ADDR_TMP_mapped));
+
+	if (compiler->saveds >= 5) {
+		FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 48));
+		addr_initialized = 1;
+
+		FAIL_IF(LD_ADD(SLJIT_SAVED_EREG2_mapped, ADDR_TMP_mapped, 8));
+	}
+
+	if (compiler->saveds >= 4) {
+		if (addr_initialized == 0) {
+			FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 40));
+			addr_initialized = 1;
+		}
+
+		FAIL_IF(LD_ADD(SLJIT_SAVED_EREG1_mapped, ADDR_TMP_mapped, 8));
+	}
+
+	if (compiler->saveds >= 3) {
+		if (addr_initialized == 0) {
+			FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 32));
+			addr_initialized = 1;
+		}
+
+		FAIL_IF(LD_ADD(SLJIT_SAVED_REG3_mapped, ADDR_TMP_mapped, 8));
+	}
+
+	if (compiler->saveds >= 2) {
+		if (addr_initialized == 0) {
+			FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 24));
+			addr_initialized = 1;
+		}
+
+		FAIL_IF(LD_ADD(SLJIT_SAVED_REG2_mapped, ADDR_TMP_mapped, 8));
+	}
+
+	if (compiler->saveds >= 1) {
+		if (addr_initialized == 0) {
+			FAIL_IF(ADDLI(ADDR_TMP_mapped, base, local_size - 16));
+			/* addr_initialized = 1; no need to initialize as it's the last one. */
+		}
+
+		FAIL_IF(LD_ADD(SLJIT_SAVED_REG1_mapped, ADDR_TMP_mapped, 8));
+	}
+
+	if (compiler->local_size <= SIMM_16BIT_MAX)
+		FAIL_IF(ADDLI(SLJIT_LOCALS_REG_mapped, SLJIT_LOCALS_REG_mapped, compiler->local_size));
+	else
+		FAIL_IF(ADD(SLJIT_LOCALS_REG_mapped, TMP_REG1_mapped, ZERO));
+
+	return JR(RA);
+}
+
+/* reg_ar is an absoulute register! */
+
+/* Can perform an operation using at most 1 instruction. */
+static sljit_si getput_arg_fast(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg_ar, sljit_si arg, sljit_sw argw)
+{
+	SLJIT_ASSERT(arg & SLJIT_MEM);
+
+	if ((!(flags & WRITE_BACK) || !(arg & REG_MASK))
+			&& !(arg & OFFS_REG_MASK) && argw <= SIMM_16BIT_MAX && argw >= SIMM_16BIT_MIN) {
+		/* Works for both absoulte and relative addresses. */
+		if (SLJIT_UNLIKELY(flags & ARG_TEST))
+			return 1;
+
+		FAIL_IF(ADDLI(ADDR_TMP_mapped, reg_map[arg & REG_MASK], argw));
+
+		if (flags & LOAD_DATA)
+			FAIL_IF(PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, ADDR_TMP_mapped));
+		else
+			FAIL_IF(PB2(data_transfer_insts[flags & MEM_MASK], ADDR_TMP_mapped, reg_ar));
+
+		return -1;
+	}
+
+	return 0;
+}
+
+/* See getput_arg below.
+   Note: can_cache is called only for binary operators. Those
+   operators always uses word arguments without write back. */
+static sljit_si can_cache(sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
+{
+	SLJIT_ASSERT((arg & SLJIT_MEM) && (next_arg & SLJIT_MEM));
+
+	/* Simple operation except for updates. */
+	if (arg & OFFS_REG_MASK) {
+		argw &= 0x3;
+		next_argw &= 0x3;
+		if (argw && argw == next_argw
+				&& (arg == next_arg || (arg & OFFS_REG_MASK) == (next_arg & OFFS_REG_MASK)))
+			return 1;
+		return 0;
+	}
+
+	if (arg == next_arg) {
+		if (((next_argw - argw) <= SIMM_16BIT_MAX
+				&& (next_argw - argw) >= SIMM_16BIT_MIN))
+			return 1;
+
+		return 0;
+	}
+
+	return 0;
+}
+
+/* Emit the necessary instructions. See can_cache above. */
+static sljit_si getput_arg(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg_ar, sljit_si arg, sljit_sw argw, sljit_si next_arg, sljit_sw next_argw)
+{
+	sljit_si tmp_ar, base;
+
+	SLJIT_ASSERT(arg & SLJIT_MEM);
+	if (!(next_arg & SLJIT_MEM)) {
+		next_arg = 0;
+		next_argw = 0;
+	}
+
+	if ((flags & MEM_MASK) <= GPR_REG && (flags & LOAD_DATA))
+		tmp_ar = reg_ar;
+	else
+		tmp_ar = TMP_REG1_mapped;
+
+	base = arg & REG_MASK;
+
+	if (SLJIT_UNLIKELY(arg & OFFS_REG_MASK)) {
+		argw &= 0x3;
+
+		if ((flags & WRITE_BACK) && reg_ar == reg_map[base]) {
+			SLJIT_ASSERT(!(flags & LOAD_DATA) && reg_map[TMP_REG1] != reg_ar);
+			FAIL_IF(ADD(TMP_REG1_mapped, reg_ar, ZERO));
+			reg_ar = TMP_REG1_mapped;
+		}
+
+		/* Using the cache. */
+		if (argw == compiler->cache_argw) {
+			if (!(flags & WRITE_BACK)) {
+				if (arg == compiler->cache_arg) {
+					if (flags & LOAD_DATA)
+						return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, TMP_REG3_mapped);
+					else
+						return PB2(data_transfer_insts[flags & MEM_MASK], TMP_REG3_mapped, reg_ar);
+				}
+
+				if ((SLJIT_MEM | (arg & OFFS_REG_MASK)) == compiler->cache_arg) {
+					if (arg == next_arg && argw == (next_argw & 0x3)) {
+						compiler->cache_arg = arg;
+						compiler->cache_argw = argw;
+						FAIL_IF(ADD(TMP_REG3_mapped, reg_map[base], TMP_REG3_mapped));
+						if (flags & LOAD_DATA)
+							return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, TMP_REG3_mapped);
+						else
+							return PB2(data_transfer_insts[flags & MEM_MASK], TMP_REG3_mapped, reg_ar);
+					}
+
+					FAIL_IF(ADD(tmp_ar, reg_map[base], TMP_REG3_mapped));
+					if (flags & LOAD_DATA)
+						return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, tmp_ar);
+					else
+						return PB2(data_transfer_insts[flags & MEM_MASK], tmp_ar, reg_ar);
+				}
+			} else {
+				if ((SLJIT_MEM | (arg & OFFS_REG_MASK)) == compiler->cache_arg) {
+					FAIL_IF(ADD(reg_map[base], reg_map[base], TMP_REG3_mapped));
+					if (flags & LOAD_DATA)
+						return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, reg_map[base]);
+					else
+						return PB2(data_transfer_insts[flags & MEM_MASK], reg_map[base], reg_ar);
+				}
+			}
+		}
+
+		if (SLJIT_UNLIKELY(argw)) {
+			compiler->cache_arg = SLJIT_MEM | (arg & OFFS_REG_MASK);
+			compiler->cache_argw = argw;
+			FAIL_IF(SHLI(TMP_REG3_mapped, reg_map[OFFS_REG(arg)], argw));
+		}
+
+		if (!(flags & WRITE_BACK)) {
+			if (arg == next_arg && argw == (next_argw & 0x3)) {
+				compiler->cache_arg = arg;
+				compiler->cache_argw = argw;
+				FAIL_IF(ADD(TMP_REG3_mapped, reg_map[base], reg_map[!argw ? OFFS_REG(arg) : TMP_REG3]));
+				tmp_ar = TMP_REG3_mapped;
+			} else
+				FAIL_IF(ADD(tmp_ar, reg_map[base], reg_map[!argw ? OFFS_REG(arg) : TMP_REG3]));
+
+			if (flags & LOAD_DATA)
+				return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, tmp_ar);
+			else
+				return PB2(data_transfer_insts[flags & MEM_MASK], tmp_ar, reg_ar);
+		}
+
+		FAIL_IF(ADD(reg_map[base], reg_map[base], reg_map[!argw ? OFFS_REG(arg) : TMP_REG3]));
+
+		if (flags & LOAD_DATA)
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, reg_map[base]);
+		else
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_map[base], reg_ar);
+	}
+
+	if (SLJIT_UNLIKELY(flags & WRITE_BACK) && base) {
+		/* Update only applies if a base register exists. */
+		if (reg_ar == reg_map[base]) {
+			SLJIT_ASSERT(!(flags & LOAD_DATA) && TMP_REG1_mapped != reg_ar);
+			if (argw <= SIMM_16BIT_MAX && argw >= SIMM_16BIT_MIN) {
+				FAIL_IF(ADDLI(ADDR_TMP_mapped, reg_map[base], argw));
+				if (flags & LOAD_DATA)
+					FAIL_IF(PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, ADDR_TMP_mapped));
+				else
+					FAIL_IF(PB2(data_transfer_insts[flags & MEM_MASK], ADDR_TMP_mapped, reg_ar));
+
+				if (argw)
+					return ADDLI(reg_map[base], reg_map[base], argw);
+
+				return SLJIT_SUCCESS;
+			}
+
+			FAIL_IF(ADD(TMP_REG1_mapped, reg_ar, ZERO));
+			reg_ar = TMP_REG1_mapped;
+		}
+
+		if (argw <= SIMM_16BIT_MAX && argw >= SIMM_16BIT_MIN) {
+			if (argw)
+				FAIL_IF(ADDLI(reg_map[base], reg_map[base], argw));
+		} else {
+			if (compiler->cache_arg == SLJIT_MEM
+					&& argw - compiler->cache_argw <= SIMM_16BIT_MAX
+					&& argw - compiler->cache_argw >= SIMM_16BIT_MIN) {
+				if (argw != compiler->cache_argw) {
+					FAIL_IF(ADD(TMP_REG3_mapped, TMP_REG3_mapped, argw - compiler->cache_argw));
+					compiler->cache_argw = argw;
+				}
+
+				FAIL_IF(ADD(reg_map[base], reg_map[base], TMP_REG3_mapped));
+			} else {
+				compiler->cache_arg = SLJIT_MEM;
+				compiler->cache_argw = argw;
+				FAIL_IF(load_immediate(compiler, TMP_REG3_mapped, argw));
+				FAIL_IF(ADD(reg_map[base], reg_map[base], TMP_REG3_mapped));
+			}
+		}
+
+		if (flags & LOAD_DATA)
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, reg_map[base]);
+		else
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_map[base], reg_ar);
+	}
+
+	if (compiler->cache_arg == arg
+			&& argw - compiler->cache_argw <= SIMM_16BIT_MAX
+			&& argw - compiler->cache_argw >= SIMM_16BIT_MIN) {
+		if (argw != compiler->cache_argw) {
+			FAIL_IF(ADDLI(TMP_REG3_mapped, TMP_REG3_mapped, argw - compiler->cache_argw));
+			compiler->cache_argw = argw;
+		}
+
+		if (flags & LOAD_DATA)
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, TMP_REG3_mapped);
+		else
+			return PB2(data_transfer_insts[flags & MEM_MASK], TMP_REG3_mapped, reg_ar);
+	}
+
+	if (compiler->cache_arg == SLJIT_MEM
+			&& argw - compiler->cache_argw <= SIMM_16BIT_MAX
+			&& argw - compiler->cache_argw >= SIMM_16BIT_MIN) {
+		if (argw != compiler->cache_argw)
+			FAIL_IF(ADDLI(TMP_REG3_mapped, TMP_REG3_mapped, argw - compiler->cache_argw));
+	} else {
+		compiler->cache_arg = SLJIT_MEM;
+		FAIL_IF(load_immediate(compiler, TMP_REG3_mapped, argw));
+	}
+
+	compiler->cache_argw = argw;
+
+	if (!base) {
+		if (flags & LOAD_DATA)
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, TMP_REG3_mapped);
+		else
+			return PB2(data_transfer_insts[flags & MEM_MASK], TMP_REG3_mapped, reg_ar);
+	}
+
+	if (arg == next_arg
+			&& next_argw - argw <= SIMM_16BIT_MAX
+			&& next_argw - argw >= SIMM_16BIT_MIN) {
+		compiler->cache_arg = arg;
+		FAIL_IF(ADD(TMP_REG3_mapped, TMP_REG3_mapped, reg_map[base]));
+		if (flags & LOAD_DATA)
+			return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, TMP_REG3_mapped);
+		else
+			return PB2(data_transfer_insts[flags & MEM_MASK], TMP_REG3_mapped, reg_ar);
+	}
+
+	FAIL_IF(ADD(tmp_ar, TMP_REG3_mapped, reg_map[base]));
+
+	if (flags & LOAD_DATA)
+		return PB2(data_transfer_insts[flags & MEM_MASK], reg_ar, tmp_ar);
+	else
+		return PB2(data_transfer_insts[flags & MEM_MASK], tmp_ar, reg_ar);
+}
+
+static SLJIT_INLINE sljit_si emit_op_mem(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg_ar, sljit_si arg, sljit_sw argw)
+{
+	if (getput_arg_fast(compiler, flags, reg_ar, arg, argw))
+		return compiler->error;
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+	return getput_arg(compiler, flags, reg_ar, arg, argw, 0, 0);
+}
+
+static SLJIT_INLINE sljit_si emit_op_mem2(struct sljit_compiler *compiler, sljit_si flags, sljit_si reg, sljit_si arg1, sljit_sw arg1w, sljit_si arg2, sljit_sw arg2w)
+{
+	if (getput_arg_fast(compiler, flags, reg, arg1, arg1w))
+		return compiler->error;
+	return getput_arg(compiler, flags, reg, arg1, arg1w, arg2, arg2w);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
+{
+	CHECK_ERROR();
+	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+
+	/* For UNUSED dst. Uncommon, but possible. */
+	if (dst == SLJIT_UNUSED)
+		return SLJIT_SUCCESS;
+
+	if (FAST_IS_REG(dst))
+		return ADD(reg_map[dst], RA, ZERO);
+
+	/* Memory. */
+	return emit_op_mem(compiler, WORD_DATA, RA, dst, dstw);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
+{
+	CHECK_ERROR();
+	check_sljit_emit_fast_return(compiler, src, srcw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	if (FAST_IS_REG(src))
+		FAIL_IF(ADD(RA, reg_map[src], ZERO));
+
+	else if (src & SLJIT_MEM)
+		FAIL_IF(emit_op_mem(compiler, WORD_DATA | LOAD_DATA, RA, src, srcw));
+
+	else if (src & SLJIT_IMM)
+		FAIL_IF(load_immediate(compiler, RA, srcw));
+
+	return JR(RA);
+}
+
+static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags, sljit_si dst, sljit_si src1, sljit_sw src2)
+{
+	sljit_si overflow_ra = 0;
+
+	switch (GET_OPCODE(op)) {
+	case SLJIT_MOV:
+	case SLJIT_MOV_P:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if (dst != src2)
+			return ADD(reg_map[dst], reg_map[src2], ZERO);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_MOV_UI:
+	case SLJIT_MOV_SI:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
+			if (op == SLJIT_MOV_SI)
+				return BFEXTS(reg_map[dst], reg_map[src2], 0, 31);
+
+		return BFEXTU(reg_map[dst], reg_map[src2], 0, 31);
+		} else if (dst != src2)
+			SLJIT_ASSERT_STOP();
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_MOV_UB:
+	case SLJIT_MOV_SB:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
+			if (op == SLJIT_MOV_SB)
+				return BFEXTS(reg_map[dst], reg_map[src2], 0, 7);
+
+			return BFEXTU(reg_map[dst], reg_map[src2], 0, 7);
+		} else if (dst != src2)
+			SLJIT_ASSERT_STOP();
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_MOV_UH:
+	case SLJIT_MOV_SH:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
+			if (op == SLJIT_MOV_SH)
+				return BFEXTS(reg_map[dst], reg_map[src2], 0, 15);
+
+			return BFEXTU(reg_map[dst], reg_map[src2], 0, 15);
+		} else if (dst != src2)
+			SLJIT_ASSERT_STOP();
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_NOT:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if (op & SLJIT_SET_E)
+			FAIL_IF(NOR(EQUAL_FLAG, reg_map[src2], reg_map[src2]));
+		if (CHECK_FLAGS(SLJIT_SET_E))
+			FAIL_IF(NOR(reg_map[dst], reg_map[src2], reg_map[src2]));
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_CLZ:
+		SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
+		if (op & SLJIT_SET_E)
+			FAIL_IF(CLZ(EQUAL_FLAG, reg_map[src2]));
+		if (CHECK_FLAGS(SLJIT_SET_E))
+			FAIL_IF(CLZ(reg_map[dst], reg_map[src2]));
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_ADD:
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_O) {
+				FAIL_IF(SHRUI(TMP_EREG1, reg_map[src1], 63));
+				if (src2 < 0)
+					FAIL_IF(XORI(TMP_EREG1, TMP_EREG1, 1));
+			}
+
+			if (op & SLJIT_SET_E)
+				FAIL_IF(ADDLI(EQUAL_FLAG, reg_map[src1], src2));
+
+			if (op & SLJIT_SET_C) {
+				if (src2 >= 0)
+					FAIL_IF(ORI(ULESS_FLAG ,reg_map[src1], src2));
+				else {
+					FAIL_IF(ADDLI(ULESS_FLAG ,ZERO, src2));
+					FAIL_IF(OR(ULESS_FLAG,reg_map[src1],ULESS_FLAG));
+				}
+			}
+
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E))
+				FAIL_IF(ADDLI(reg_map[dst], reg_map[src1], src2));
+
+			if (op & SLJIT_SET_O) {
+				FAIL_IF(SHRUI(OVERFLOW_FLAG, reg_map[dst], 63));
+
+				if (src2 < 0)
+					FAIL_IF(XORI(OVERFLOW_FLAG, OVERFLOW_FLAG, 1));
+			}
+		} else {
+			if (op & SLJIT_SET_O) {
+				FAIL_IF(XOR(TMP_EREG1, reg_map[src1], reg_map[src2]));
+				FAIL_IF(SHRUI(TMP_EREG1, TMP_EREG1, 63));
+
+				if (src1 != dst)
+					overflow_ra = reg_map[src1];
+				else if (src2 != dst)
+					overflow_ra = reg_map[src2];
+				else {
+					/* Rare ocasion. */
+					FAIL_IF(ADD(TMP_EREG2, reg_map[src1], ZERO));
+					overflow_ra = TMP_EREG2;
+				}
+			}
+
+			if (op & SLJIT_SET_E)
+				FAIL_IF(ADD(EQUAL_FLAG ,reg_map[src1], reg_map[src2]));
+
+			if (op & SLJIT_SET_C)
+				FAIL_IF(OR(ULESS_FLAG,reg_map[src1], reg_map[src2]));
+
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E))
+				FAIL_IF(ADD(reg_map[dst],reg_map[src1], reg_map[src2]));
+
+			if (op & SLJIT_SET_O) {
+				FAIL_IF(XOR(OVERFLOW_FLAG,reg_map[dst], overflow_ra));
+				FAIL_IF(SHRUI(OVERFLOW_FLAG, OVERFLOW_FLAG, 63));
+			}
+		}
+
+		/* a + b >= a | b (otherwise, the carry should be set to 1). */
+		if (op & SLJIT_SET_C)
+			FAIL_IF(CMPLTU(ULESS_FLAG ,reg_map[dst] ,ULESS_FLAG));
+
+		if (op & SLJIT_SET_O)
+			return CMOVNEZ(OVERFLOW_FLAG, TMP_EREG1, ZERO);
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_ADDC:
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_C) {
+				if (src2 >= 0)
+					FAIL_IF(ORI(TMP_EREG1, reg_map[src1], src2));
+				else {
+					FAIL_IF(ADDLI(TMP_EREG1, ZERO, src2));
+					FAIL_IF(OR(TMP_EREG1, reg_map[src1], TMP_EREG1));
+				}
+			}
+
+			FAIL_IF(ADDLI(reg_map[dst], reg_map[src1], src2));
+
+		} else {
+			if (op & SLJIT_SET_C)
+				FAIL_IF(OR(TMP_EREG1, reg_map[src1], reg_map[src2]));
+
+			/* dst may be the same as src1 or src2. */
+			FAIL_IF(ADD(reg_map[dst], reg_map[src1], reg_map[src2]));
+		}
+
+		if (op & SLJIT_SET_C)
+			FAIL_IF(CMPLTU(TMP_EREG1, reg_map[dst], TMP_EREG1));
+
+		FAIL_IF(ADD(reg_map[dst], reg_map[dst], ULESS_FLAG));
+
+		if (!(op & SLJIT_SET_C))
+			return SLJIT_SUCCESS;
+
+		/* Set TMP_EREG2 (dst == 0) && (ULESS_FLAG == 1). */
+		FAIL_IF(CMPLTUI(TMP_EREG2, reg_map[dst], 1));
+		FAIL_IF(AND(TMP_EREG2, TMP_EREG2, ULESS_FLAG));
+		/* Set carry flag. */
+		return OR(ULESS_FLAG, TMP_EREG2, TMP_EREG1);
+
+	case SLJIT_SUB:
+		if ((flags & SRC2_IMM) && ((op & (SLJIT_SET_U | SLJIT_SET_S)) || src2 == SIMM_16BIT_MIN)) {
+			FAIL_IF(ADDLI(TMP_REG2_mapped, ZERO, src2));
+			src2 = TMP_REG2;
+			flags &= ~SRC2_IMM;
+		}
+
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_O) {
+				FAIL_IF(SHRUI(TMP_EREG1,reg_map[src1], 63));
+
+				if (src2 < 0)
+					FAIL_IF(XORI(TMP_EREG1, TMP_EREG1, 1));
+
+				if (src1 != dst)
+					overflow_ra = reg_map[src1];
+				else {
+					/* Rare ocasion. */
+					FAIL_IF(ADD(TMP_EREG2, reg_map[src1], ZERO));
+	
+					overflow_ra = TMP_EREG2;
+				}
+			}
+
+			if (op & SLJIT_SET_E)
+				FAIL_IF(ADDLI(EQUAL_FLAG, reg_map[src1], -src2));
+
+			if (op & SLJIT_SET_C) {
+				FAIL_IF(load_immediate(compiler, ADDR_TMP_mapped, src2));
+				FAIL_IF(CMPLTU(ULESS_FLAG, reg_map[src1], ADDR_TMP_mapped));
+			}
+
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E))
+				FAIL_IF(ADDLI(reg_map[dst], reg_map[src1], -src2));
+
+		} else {
+
+			if (op & SLJIT_SET_O) {
+				FAIL_IF(XOR(TMP_EREG1, reg_map[src1], reg_map[src2]));
+				FAIL_IF(SHRUI(TMP_EREG1, TMP_EREG1, 63));
+
+				if (src1 != dst)
+					overflow_ra = reg_map[src1];
+				else {
+					/* Rare ocasion. */
+					FAIL_IF(ADD(TMP_EREG2, reg_map[src1], ZERO));
+					overflow_ra = TMP_EREG2;
+				}
+			}
+
+			if (op & SLJIT_SET_E)
+				FAIL_IF(SUB(EQUAL_FLAG, reg_map[src1], reg_map[src2]));
+
+			if (op & (SLJIT_SET_U | SLJIT_SET_C))
+				FAIL_IF(CMPLTU(ULESS_FLAG, reg_map[src1], reg_map[src2]));
+
+			if (op & SLJIT_SET_U)
+				FAIL_IF(CMPLTU(UGREATER_FLAG, reg_map[src2], reg_map[src1]));
+
+			if (op & SLJIT_SET_S) {
+				FAIL_IF(CMPLTS(LESS_FLAG ,reg_map[src1] ,reg_map[src2]));
+				FAIL_IF(CMPLTS(GREATER_FLAG ,reg_map[src2] ,reg_map[src1]));
+			}
+
+			/* dst may be the same as src1 or src2. */
+			if (CHECK_FLAGS(SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))
+				FAIL_IF(SUB(reg_map[dst], reg_map[src1], reg_map[src2]));
+		}
+
+		if (op & SLJIT_SET_O) {
+			FAIL_IF(XOR(OVERFLOW_FLAG, reg_map[dst], overflow_ra));
+			FAIL_IF(SHRUI(OVERFLOW_FLAG, OVERFLOW_FLAG, 63));
+			return CMOVEQZ(OVERFLOW_FLAG, TMP_EREG1, ZERO);
+		}
+
+		return SLJIT_SUCCESS;
+
+	case SLJIT_SUBC:
+		if ((flags & SRC2_IMM) && src2 == SIMM_16BIT_MIN) {
+			FAIL_IF(ADDLI(TMP_REG2_mapped, ZERO, src2));
+			src2 = TMP_REG2;
+			flags &= ~SRC2_IMM;
+		}
+
+		if (flags & SRC2_IMM) {
+			if (op & SLJIT_SET_C) {
+				FAIL_IF(load_immediate(compiler, ADDR_TMP_mapped, -src2));
+				FAIL_IF(CMPLTU(TMP_EREG1, reg_map[src1], ADDR_TMP_mapped));
+			}
+
+			/* dst may be the same as src1 or src2. */
+			FAIL_IF(ADDLI(reg_map[dst], reg_map[src1], -src2));
+
+		} else {
+			if (op & SLJIT_SET_C)
+				FAIL_IF(CMPLTU(TMP_EREG1, reg_map[src1], reg_map[src2]));
+				/* dst may be the same as src1 or src2. */
+			FAIL_IF(SUB(reg_map[dst], reg_map[src1], reg_map[src2]));
+		}
+
+		if (op & SLJIT_SET_C)
+			FAIL_IF(CMOVEQZ(TMP_EREG1, reg_map[dst], ULESS_FLAG));
+
+		FAIL_IF(SUB(reg_map[dst], reg_map[dst], ULESS_FLAG));
+
+		if (op & SLJIT_SET_C)
+			FAIL_IF(ADD(ULESS_FLAG, TMP_EREG1, ZERO));
+
+		return SLJIT_SUCCESS;
+
+#define EMIT_LOGICAL(op_imm, op_norm) \
+	if (flags & SRC2_IMM) { \
+		FAIL_IF(load_immediate(compiler, ADDR_TMP_mapped, src2)); \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_norm, EQUAL_FLAG, reg_map[src1], \
+				ADDR_TMP_mapped, __LINE__)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_norm, reg_map[dst], reg_map[src1], \
+				ADDR_TMP_mapped, __LINE__)); \
+	} else { \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_norm, EQUAL_FLAG, reg_map[src1], \
+				reg_map[src2], __LINE__)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_norm, reg_map[dst], reg_map[src1], \
+				reg_map[src2], __LINE__)); \
+	}
+
+	case SLJIT_AND:
+		EMIT_LOGICAL(TILEGX_OPC_ANDI, TILEGX_OPC_AND);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_OR:
+		EMIT_LOGICAL(TILEGX_OPC_ORI, TILEGX_OPC_OR);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_XOR:
+		EMIT_LOGICAL(TILEGX_OPC_XORI, TILEGX_OPC_XOR);
+		return SLJIT_SUCCESS;
+
+#define EMIT_SHIFT(op_imm, op_norm) \
+	if (flags & SRC2_IMM) { \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_imm, EQUAL_FLAG, reg_map[src1], \
+				src2 & 0x3F, __LINE__)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_imm, reg_map[dst], reg_map[src1], \
+				src2 & 0x3F, __LINE__)); \
+	} else { \
+		if (op & SLJIT_SET_E) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_imm, reg_map[dst], reg_map[src1], \
+				src2 & 0x3F, __LINE__)); \
+		if (CHECK_FLAGS(SLJIT_SET_E)) \
+			FAIL_IF(push_3_buffer( \
+				compiler, op_norm, reg_map[dst], reg_map[src1], \
+				reg_map[src2], __LINE__)); \
+	}
+
+	case SLJIT_SHL:
+		EMIT_SHIFT(TILEGX_OPC_SHLI, TILEGX_OPC_SHL);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_LSHR:
+		EMIT_SHIFT(TILEGX_OPC_SHRUI, TILEGX_OPC_SHRU);
+		return SLJIT_SUCCESS;
+
+	case SLJIT_ASHR:
+		EMIT_SHIFT(TILEGX_OPC_SHRSI, TILEGX_OPC_SHRS);
+		return SLJIT_SUCCESS;
+	}
+
+	SLJIT_ASSERT_STOP();
+	return SLJIT_SUCCESS;
+}
+
+static sljit_si emit_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags, sljit_si dst, sljit_sw dstw, sljit_si src1, sljit_sw src1w, sljit_si src2, sljit_sw src2w)
+{
+	/* arg1 goes to TMP_REG1 or src reg.
+	   arg2 goes to TMP_REG2, imm or src reg.
+	   TMP_REG3 can be used for caching.
+	   result goes to TMP_REG2, so put result can use TMP_REG1 and TMP_REG3. */
+	sljit_si dst_r = TMP_REG2;
+	sljit_si src1_r;
+	sljit_sw src2_r = 0;
+	sljit_si sugg_src2_r = TMP_REG2;
+
+	if (!(flags & ALT_KEEP_CACHE)) {
+		compiler->cache_arg = 0;
+		compiler->cache_argw = 0;
+	}
+
+	if (SLJIT_UNLIKELY(dst == SLJIT_UNUSED)) {
+		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI && !(src2 & SLJIT_MEM))
+			return SLJIT_SUCCESS;
+		if (GET_FLAGS(op))
+			flags |= UNUSED_DEST;
+	} else if (FAST_IS_REG(dst)) {
+		dst_r = dst;
+		flags |= REG_DEST;
+		if (op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
+			sugg_src2_r = dst_r;
+	} else if ((dst & SLJIT_MEM) && !getput_arg_fast(compiler, flags | ARG_TEST, TMP_REG1_mapped, dst, dstw))
+		flags |= SLOW_DEST;
+
+	if (flags & IMM_OP) {
+		if ((src2 & SLJIT_IMM) && src2w) {
+			if ((!(flags & LOGICAL_OP)
+					&& (src2w <= SIMM_16BIT_MAX && src2w >= SIMM_16BIT_MIN))
+					|| ((flags & LOGICAL_OP) && !(src2w & ~UIMM_16BIT_MAX))) {
+				flags |= SRC2_IMM;
+				src2_r = src2w;
+			}
+		}
+
+		if (!(flags & SRC2_IMM) && (flags & CUMULATIVE_OP) && (src1 & SLJIT_IMM) && src1w) {
+			if ((!(flags & LOGICAL_OP)
+					&& (src1w <= SIMM_16BIT_MAX && src1w >= SIMM_16BIT_MIN))
+					|| ((flags & LOGICAL_OP) && !(src1w & ~UIMM_16BIT_MAX))) {
+				flags |= SRC2_IMM;
+				src2_r = src1w;
+
+				/* And swap arguments. */
+				src1 = src2;
+				src1w = src2w;
+				src2 = SLJIT_IMM;
+				/* src2w = src2_r unneeded. */
+			}
+		}
+	}
+
+	/* Source 1. */
+	if (FAST_IS_REG(src1)) {
+		src1_r = src1;
+		flags |= REG1_SOURCE;
+	} else if (src1 & SLJIT_IMM) {
+		if (src1w) {
+			FAIL_IF(load_immediate(compiler, TMP_REG1_mapped, src1w));
+			src1_r = TMP_REG1;
+		} else
+			src1_r = 0;
+	} else {
+		if (getput_arg_fast(compiler, flags | LOAD_DATA, TMP_REG1_mapped, src1, src1w))
+			FAIL_IF(compiler->error);
+		else
+			flags |= SLOW_SRC1;
+		src1_r = TMP_REG1;
+	}
+
+	/* Source 2. */
+	if (FAST_IS_REG(src2)) {
+		src2_r = src2;
+		flags |= REG2_SOURCE;
+		if (!(flags & REG_DEST) && op >= SLJIT_MOV && op <= SLJIT_MOVU_SI)
+			dst_r = src2_r;
+	} else if (src2 & SLJIT_IMM) {
+		if (!(flags & SRC2_IMM)) {
+			if (src2w) {
+				FAIL_IF(load_immediate(compiler, reg_map[sugg_src2_r], src2w));
+				src2_r = sugg_src2_r;
+			} else {
+				src2_r = 0;
+				if ((op >= SLJIT_MOV && op <= SLJIT_MOVU_SI) && (dst & SLJIT_MEM))
+					dst_r = 0;
+			}
+		}
+	} else {
+		if (getput_arg_fast(compiler, flags | LOAD_DATA, reg_map[sugg_src2_r], src2, src2w))
+			FAIL_IF(compiler->error);
+		else
+			flags |= SLOW_SRC2;
+		src2_r = sugg_src2_r;
+	}
+
+	if ((flags & (SLOW_SRC1 | SLOW_SRC2)) == (SLOW_SRC1 | SLOW_SRC2)) {
+		SLJIT_ASSERT(src2_r == TMP_REG2);
+		if (!can_cache(src1, src1w, src2, src2w) && can_cache(src1, src1w, dst, dstw)) {
+			FAIL_IF(getput_arg(compiler, flags | LOAD_DATA, TMP_REG2_mapped, src2, src2w, src1, src1w));
+			FAIL_IF(getput_arg(compiler, flags | LOAD_DATA, TMP_REG1_mapped, src1, src1w, dst, dstw));
+		} else {
+			FAIL_IF(getput_arg(compiler, flags | LOAD_DATA, TMP_REG1_mapped, src1, src1w, src2, src2w));
+			FAIL_IF(getput_arg(compiler, flags | LOAD_DATA, TMP_REG2_mapped, src2, src2w, dst, dstw));
+		}
+	} else if (flags & SLOW_SRC1)
+		FAIL_IF(getput_arg(compiler, flags | LOAD_DATA, TMP_REG1_mapped, src1, src1w, dst, dstw));
+	else if (flags & SLOW_SRC2)
+		FAIL_IF(getput_arg(compiler, flags | LOAD_DATA, reg_map[sugg_src2_r], src2, src2w, dst, dstw));
+
+	FAIL_IF(emit_single_op(compiler, op, flags, dst_r, src1_r, src2_r));
+
+	if (dst & SLJIT_MEM) {
+		if (!(flags & SLOW_DEST)) {
+			getput_arg_fast(compiler, flags, reg_map[dst_r], dst, dstw);
+			return compiler->error;
+		}
+
+		return getput_arg(compiler, flags, reg_map[dst_r], dst, dstw, 0, 0);
+	}
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op, sljit_si dst, sljit_sw dstw, sljit_si src, sljit_sw srcw, sljit_si type)
+{
+	sljit_si sugg_dst_ar, dst_ar;
+	sljit_si flags = GET_ALL_FLAGS(op);
+
+	CHECK_ERROR();
+	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+
+	if (dst == SLJIT_UNUSED)
+		return SLJIT_SUCCESS;
+
+	op = GET_OPCODE(op);
+	sugg_dst_ar = reg_map[(op < SLJIT_ADD && FAST_IS_REG(dst)) ? dst : TMP_REG2];
+
+	compiler->cache_arg = 0;
+	compiler->cache_argw = 0;
+	if (op >= SLJIT_ADD && (src & SLJIT_MEM)) {
+		ADJUST_LOCAL_OFFSET(src, srcw);
+		FAIL_IF(emit_op_mem2(compiler, WORD_DATA | LOAD_DATA, TMP_REG1_mapped, src, srcw, dst, dstw));
+		src = TMP_REG1;
+		srcw = 0;
+	}
+
+	switch (type) {
+	case SLJIT_C_EQUAL:
+	case SLJIT_C_NOT_EQUAL:
+		FAIL_IF(CMPLTUI(sugg_dst_ar, EQUAL_FLAG, 1));
+		dst_ar = sugg_dst_ar;
+		break;
+	case SLJIT_C_LESS:
+	case SLJIT_C_GREATER_EQUAL:
+	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_C_FLOAT_GREATER_EQUAL:
+		dst_ar = ULESS_FLAG;
+		break;
+	case SLJIT_C_GREATER:
+	case SLJIT_C_LESS_EQUAL:
+	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_C_FLOAT_LESS_EQUAL:
+		dst_ar = UGREATER_FLAG;
+		break;
+	case SLJIT_C_SIG_LESS:
+	case SLJIT_C_SIG_GREATER_EQUAL:
+		dst_ar = LESS_FLAG;
+		break;
+	case SLJIT_C_SIG_GREATER:
+	case SLJIT_C_SIG_LESS_EQUAL:
+		dst_ar = GREATER_FLAG;
+		break;
+	case SLJIT_C_OVERFLOW:
+	case SLJIT_C_NOT_OVERFLOW:
+		dst_ar = OVERFLOW_FLAG;
+		break;
+	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_C_MUL_NOT_OVERFLOW:
+		FAIL_IF(CMPLTUI(sugg_dst_ar, OVERFLOW_FLAG, 1));
+		dst_ar = sugg_dst_ar;
+		type ^= 0x1; /* Flip type bit for the XORI below. */
+		break;
+	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_C_FLOAT_NOT_EQUAL:
+		dst_ar = EQUAL_FLAG;
+		break;
+
+	default:
+		SLJIT_ASSERT_STOP();
+		dst_ar = sugg_dst_ar;
+		break;
+	}
+
+	if (type & 0x1) {
+		FAIL_IF(XORI(sugg_dst_ar, dst_ar, 1));
+		dst_ar = sugg_dst_ar;
+	}
+
+	if (op >= SLJIT_ADD) {
+		if (TMP_REG2_mapped != dst_ar)
+			FAIL_IF(ADD(TMP_REG2_mapped, dst_ar, ZERO));
+		return emit_op(compiler, op | flags, CUMULATIVE_OP | LOGICAL_OP | IMM_OP | ALT_KEEP_CACHE, dst, dstw, src, srcw, TMP_REG2, 0);
+	}
+
+	if (dst & SLJIT_MEM)
+		return emit_op_mem(compiler, WORD_DATA, dst_ar, dst, dstw);
+
+	if (sugg_dst_ar != dst_ar)
+		return ADD(sugg_dst_ar, dst_ar, ZERO);
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op) {
+	CHECK_ERROR();
+	check_sljit_emit_op0(compiler, op);
+
+	op = GET_OPCODE(op);
+	switch (op) {
+	case SLJIT_NOP:
+		return push_0_buffer(compiler, TILEGX_OPC_FNOP, __LINE__);
+
+	case SLJIT_BREAKPOINT:
+		return PI(BPT);
+
+	case SLJIT_UMUL:
+	case SLJIT_SMUL:
+	case SLJIT_UDIV:
+	case SLJIT_SDIV:
+		SLJIT_ASSERT_STOP();
+	}
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op, sljit_si dst, sljit_sw dstw, sljit_si src, sljit_sw srcw)
+{
+	CHECK_ERROR();
+	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	switch (GET_OPCODE(op)) {
+	case SLJIT_MOV:
+	case SLJIT_MOV_P:
+		return emit_op(compiler, SLJIT_MOV, WORD_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_MOV_UI:
+		return emit_op(compiler, SLJIT_MOV_UI, INT_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_MOV_SI:
+		return emit_op(compiler, SLJIT_MOV_SI, INT_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_MOV_UB:
+		return emit_op(compiler, SLJIT_MOV_UB, BYTE_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ub) srcw : srcw);
+
+	case SLJIT_MOV_SB:
+		return emit_op(compiler, SLJIT_MOV_SB, BYTE_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sb) srcw : srcw);
+
+	case SLJIT_MOV_UH:
+		return emit_op(compiler, SLJIT_MOV_UH, HALF_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_uh) srcw : srcw);
+
+	case SLJIT_MOV_SH:
+		return emit_op(compiler, SLJIT_MOV_SH, HALF_DATA | SIGNED_DATA, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sh) srcw : srcw);
+
+	case SLJIT_MOVU:
+	case SLJIT_MOVU_P:
+		return emit_op(compiler, SLJIT_MOV, WORD_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_MOVU_UI:
+		return emit_op(compiler, SLJIT_MOV_UI, INT_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_MOVU_SI:
+		return emit_op(compiler, SLJIT_MOV_SI, INT_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_MOVU_UB:
+		return emit_op(compiler, SLJIT_MOV_UB, BYTE_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_ub) srcw : srcw);
+
+	case SLJIT_MOVU_SB:
+		return emit_op(compiler, SLJIT_MOV_SB, BYTE_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sb) srcw : srcw);
+
+	case SLJIT_MOVU_UH:
+		return emit_op(compiler, SLJIT_MOV_UH, HALF_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_uh) srcw : srcw);
+
+	case SLJIT_MOVU_SH:
+		return emit_op(compiler, SLJIT_MOV_SH, HALF_DATA | SIGNED_DATA | WRITE_BACK, dst, dstw, TMP_REG1, 0, src, (src & SLJIT_IMM) ? (sljit_sh) srcw : srcw);
+
+	case SLJIT_NOT:
+		return emit_op(compiler, op, 0, dst, dstw, TMP_REG1, 0, src, srcw);
+
+	case SLJIT_NEG:
+		return emit_op(compiler, SLJIT_SUB | GET_ALL_FLAGS(op), IMM_OP, dst, dstw, SLJIT_IMM, 0, src, srcw);
+
+	case SLJIT_CLZ:
+		return emit_op(compiler, op, 0, dst, dstw, TMP_REG1, 0, src, srcw);
+	}
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op, sljit_si dst, sljit_sw dstw, sljit_si src1, sljit_sw src1w, sljit_si src2, sljit_sw src2w)
+{
+	CHECK_ERROR();
+	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+	ADJUST_LOCAL_OFFSET(src1, src1w);
+	ADJUST_LOCAL_OFFSET(src2, src2w);
+
+	switch (GET_OPCODE(op)) {
+	case SLJIT_ADD:
+	case SLJIT_ADDC:
+		return emit_op(compiler, op, CUMULATIVE_OP | IMM_OP, dst, dstw, src1, src1w, src2, src2w);
+
+	case SLJIT_SUB:
+	case SLJIT_SUBC:
+		return emit_op(compiler, op, IMM_OP, dst, dstw, src1, src1w, src2, src2w);
+
+	case SLJIT_MUL:
+		return emit_op(compiler, op, CUMULATIVE_OP, dst, dstw, src1, src1w, src2, src2w);
+
+	case SLJIT_AND:
+	case SLJIT_OR:
+	case SLJIT_XOR:
+		return emit_op(compiler, op, CUMULATIVE_OP | LOGICAL_OP | IMM_OP, dst, dstw, src1, src1w, src2, src2w);
+
+	case SLJIT_SHL:
+	case SLJIT_LSHR:
+	case SLJIT_ASHR:
+		if (src2 & SLJIT_IMM)
+			src2w &= 0x3f;
+		if (op & SLJIT_INT_OP)
+			src2w &= 0x1f;
+
+		return emit_op(compiler, op, IMM_OP, dst, dstw, src1, src1w, src2, src2w);
+	}
+
+	return SLJIT_SUCCESS;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_label * sljit_emit_label(struct sljit_compiler *compiler)
+{
+	struct sljit_label *label;
+
+	flush_buffer(compiler);
+
+	CHECK_ERROR_PTR();
+	check_sljit_emit_label(compiler);
+
+	if (compiler->last_label && compiler->last_label->size == compiler->size)
+		return compiler->last_label;
+
+	label = (struct sljit_label *)ensure_abuf(compiler, sizeof(struct sljit_label));
+	PTR_FAIL_IF(!label);
+	set_label(label, compiler);
+	return label;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw)
+{
+	sljit_si src_r = TMP_REG2;
+	struct sljit_jump *jump = NULL;
+
+	flush_buffer(compiler);
+
+	CHECK_ERROR();
+	check_sljit_emit_ijump(compiler, type, src, srcw);
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
+	if (FAST_IS_REG(src)) {
+		if (reg_map[src] != 0)
+			src_r = src;
+		else
+			FAIL_IF(ADD_SOLO(TMP_REG2_mapped, reg_map[src], ZERO));
+	}
+
+	if (type >= SLJIT_CALL0) {
+		SLJIT_ASSERT(reg_map[PIC_ADDR_REG] == 16 && PIC_ADDR_REG == TMP_REG2);
+		if (src & (SLJIT_IMM | SLJIT_MEM)) {
+			if (src & SLJIT_IMM)
+				FAIL_IF(emit_const(compiler, reg_map[PIC_ADDR_REG], srcw, 1));
+			else {
+				SLJIT_ASSERT(src_r == TMP_REG2 && (src & SLJIT_MEM));
+				FAIL_IF(emit_op(compiler, SLJIT_MOV, WORD_DATA, TMP_REG2, 0, TMP_REG1, 0, src, srcw));
+			}
+
+			FAIL_IF(ADD_SOLO(0, reg_map[SLJIT_SCRATCH_REG1], ZERO));
+
+			FAIL_IF(ADDI_SOLO(54, 54, -16));
+
+			FAIL_IF(JALR_SOLO(reg_map[PIC_ADDR_REG]));
+
+			return ADDI_SOLO(54, 54, 16);
+		}
+
+		/* Register input. */
+		if (type >= SLJIT_CALL1)
+			FAIL_IF(ADD_SOLO(0, reg_map[SLJIT_SCRATCH_REG1], ZERO));
+
+		FAIL_IF(ADD_SOLO(reg_map[PIC_ADDR_REG], reg_map[src_r], ZERO));
+
+		FAIL_IF(ADDI_SOLO(54, 54, -16));
+
+		FAIL_IF(JALR_SOLO(reg_map[src_r]));
+
+		return ADDI_SOLO(54, 54, 16);
+	}
+
+	if (src & SLJIT_IMM) {
+		jump = (struct sljit_jump *)ensure_abuf(compiler, sizeof(struct sljit_jump));
+		FAIL_IF(!jump);
+		set_jump(jump, compiler, JUMP_ADDR | ((type >= SLJIT_FAST_CALL) ? IS_JAL : 0));
+		jump->u.target = srcw;
+		FAIL_IF(emit_const(compiler, TMP_REG2_mapped, 0, 1));
+
+		if (type >= SLJIT_FAST_CALL) {
+			FAIL_IF(ADD_SOLO(ZERO, ZERO, ZERO));
+			jump->addr = compiler->size;
+			FAIL_IF(JR_SOLO(reg_map[src_r]));
+		} else {
+			jump->addr = compiler->size;
+			FAIL_IF(JR_SOLO(reg_map[src_r]));
+		}
+
+		return SLJIT_SUCCESS;
+
+	} else if (src & SLJIT_MEM)
+		FAIL_IF(emit_op(compiler, SLJIT_MOV, WORD_DATA, TMP_REG2, 0, TMP_REG1, 0, src, srcw));
+
+	FAIL_IF(JR_SOLO(reg_map[src_r]));
+
+	if (jump)
+		jump->addr = compiler->size;
+
+	return SLJIT_SUCCESS;
+}
+
+#define BR_Z(src) \
+	inst = BEQZ_X1 | SRCA_X1(src); \
+	flags = IS_COND;
+
+#define BR_NZ(src) \
+	inst = BNEZ_X1 | SRCA_X1(src); \
+	flags = IS_COND;
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump * sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
+{
+	struct sljit_jump *jump;
+	sljit_ins inst;
+	sljit_si flags = 0;
+
+	flush_buffer(compiler);
+
+	CHECK_ERROR_PTR();
+	check_sljit_emit_jump(compiler, type);
+
+	jump = (struct sljit_jump *)ensure_abuf(compiler, sizeof(struct sljit_jump));
+	PTR_FAIL_IF(!jump);
+	set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
+	type &= 0xff;
+
+	switch (type) {
+	case SLJIT_C_EQUAL:
+	case SLJIT_C_FLOAT_NOT_EQUAL:
+		BR_NZ(EQUAL_FLAG);
+		break;
+	case SLJIT_C_NOT_EQUAL:
+	case SLJIT_C_FLOAT_EQUAL:
+		BR_Z(EQUAL_FLAG);
+		break;
+	case SLJIT_C_LESS:
+	case SLJIT_C_FLOAT_LESS:
+		BR_Z(ULESS_FLAG);
+		break;
+	case SLJIT_C_GREATER_EQUAL:
+	case SLJIT_C_FLOAT_GREATER_EQUAL:
+		BR_NZ(ULESS_FLAG);
+		break;
+	case SLJIT_C_GREATER:
+	case SLJIT_C_FLOAT_GREATER:
+		BR_Z(UGREATER_FLAG);
+		break;
+	case SLJIT_C_LESS_EQUAL:
+	case SLJIT_C_FLOAT_LESS_EQUAL:
+		BR_NZ(UGREATER_FLAG);
+		break;
+	case SLJIT_C_SIG_LESS:
+		BR_Z(LESS_FLAG);
+		break;
+	case SLJIT_C_SIG_GREATER_EQUAL:
+		BR_NZ(LESS_FLAG);
+		break;
+	case SLJIT_C_SIG_GREATER:
+		BR_Z(GREATER_FLAG);
+		break;
+	case SLJIT_C_SIG_LESS_EQUAL:
+		BR_NZ(GREATER_FLAG);
+		break;
+	case SLJIT_C_OVERFLOW:
+	case SLJIT_C_MUL_OVERFLOW:
+		BR_Z(OVERFLOW_FLAG);
+		break;
+	case SLJIT_C_NOT_OVERFLOW:
+	case SLJIT_C_MUL_NOT_OVERFLOW:
+		BR_NZ(OVERFLOW_FLAG);
+		break;
+	default:
+		/* Not conditional branch. */
+		inst = 0;
+		break;
+	}
+
+	jump->flags |= flags;
+
+	if (inst) {
+		inst = inst | ((type <= SLJIT_JUMP) ? BOFF_X1(5) : BOFF_X1(6));
+		PTR_FAIL_IF(PI(inst));
+	}
+
+	PTR_FAIL_IF(emit_const(compiler, TMP_REG2_mapped, 0, 1));
+	if (type <= SLJIT_JUMP) {
+		jump->addr = compiler->size;
+		PTR_FAIL_IF(JR_SOLO(TMP_REG2_mapped));
+	} else {
+		SLJIT_ASSERT(reg_map[PIC_ADDR_REG] == 16 && PIC_ADDR_REG == TMP_REG2);
+		/* Cannot be optimized out if type is >= CALL0. */
+		jump->flags |= IS_JAL | (type >= SLJIT_CALL0 ? SLJIT_REWRITABLE_JUMP : 0);
+		PTR_FAIL_IF(ADD_SOLO(0, reg_map[SLJIT_SCRATCH_REG1], ZERO));
+		jump->addr = compiler->size;
+		PTR_FAIL_IF(JALR_SOLO(TMP_REG2_mapped));
+	}
+
+	return jump;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
+{
+	return 0;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op, sljit_si dst, sljit_sw dstw, sljit_si src, sljit_sw srcw)
+{
+	SLJIT_ASSERT_STOP();
+}
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op, sljit_si dst, sljit_sw dstw, sljit_si src1, sljit_sw src1w, sljit_si src2, sljit_sw src2w)
+{
+	SLJIT_ASSERT_STOP();
+}
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_const * sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
+{
+	struct sljit_const *const_;
+	sljit_si reg;
+
+	flush_buffer(compiler);
+
+	CHECK_ERROR_PTR();
+	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	ADJUST_LOCAL_OFFSET(dst, dstw);
+
+	const_ = (struct sljit_const *)ensure_abuf(compiler, sizeof(struct sljit_const));
+	PTR_FAIL_IF(!const_);
+	set_const(const_, compiler);
+
+	reg = FAST_IS_REG(dst) ? dst : TMP_REG2;
+
+	PTR_FAIL_IF(emit_const_64(compiler, reg, init_value, 1));
+
+	if (dst & SLJIT_MEM)
+		PTR_FAIL_IF(emit_op(compiler, SLJIT_MOV, WORD_DATA, dst, dstw, TMP_REG1, 0, TMP_REG2, 0));
+	return const_;
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
+{
+	sljit_ins *inst = (sljit_ins *)addr;
+
+	inst[0] = (inst[0] & ~(0xFFFFL << 43)) | (((new_addr >> 32) & 0xffff) << 43);
+	inst[1] = (inst[1] & ~(0xFFFFL << 43)) | (((new_addr >> 16) & 0xffff) << 43);
+	inst[2] = (inst[2] & ~(0xFFFFL << 43)) | ((new_addr & 0xffff) << 43);
+	SLJIT_CACHE_FLUSH(inst, inst + 3);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
+{
+	sljit_ins *inst = (sljit_ins *)addr;
+
+	inst[0] = (inst[0] & ~(0xFFFFL << 43)) | (((new_constant >> 48) & 0xFFFFL) << 43);
+	inst[1] = (inst[1] & ~(0xFFFFL << 43)) | (((new_constant >> 32) & 0xFFFFL) << 43);
+	inst[2] = (inst[2] & ~(0xFFFFL << 43)) | (((new_constant >> 16) & 0xFFFFL) << 43);
+	inst[3] = (inst[3] & ~(0xFFFFL << 43)) | ((new_constant & 0xFFFFL) << 43);
+	SLJIT_CACHE_FLUSH(inst, inst + 4);
+}
diff --git a/src/3rdparty/pcre/sljit/sljitNativeX86_32.c b/src/3rdparty/pcre/sljit/sljitNativeX86_32.c
index 2866e8f2a1..dd03f26618 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeX86_32.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeX86_32.c
@@ -89,11 +89,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compil
 	FAIL_IF(!inst);
 
 	INC_SIZE(size);
-	PUSH_REG(reg_map[TMP_REGISTER]);
+	PUSH_REG(reg_map[TMP_REG1]);
 #if !(defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
 	if (args > 0) {
 		*inst++ = MOV_r_rm;
-		*inst++ = MOD_REG | (reg_map[TMP_REGISTER] << 3) | 0x4 /* esp */;
+		*inst++ = MOD_REG | (reg_map[TMP_REG1] << 3) | 0x4 /* esp */;
 	}
 #endif
 	if (saveds > 2)
@@ -121,17 +121,17 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compil
 #else
 	if (args > 0) {
 		*inst++ = MOV_r_rm;
-		*inst++ = MOD_DISP8 | (reg_map[SLJIT_SAVED_REG1] << 3) | reg_map[TMP_REGISTER];
+		*inst++ = MOD_DISP8 | (reg_map[SLJIT_SAVED_REG1] << 3) | reg_map[TMP_REG1];
 		*inst++ = sizeof(sljit_sw) * 2;
 	}
 	if (args > 1) {
 		*inst++ = MOV_r_rm;
-		*inst++ = MOD_DISP8 | (reg_map[SLJIT_SAVED_REG2] << 3) | reg_map[TMP_REGISTER];
+		*inst++ = MOD_DISP8 | (reg_map[SLJIT_SAVED_REG2] << 3) | reg_map[TMP_REG1];
 		*inst++ = sizeof(sljit_sw) * 3;
 	}
 	if (args > 2) {
 		*inst++ = MOV_r_rm;
-		*inst++ = MOD_DISP8 | (reg_map[SLJIT_SAVED_REG3] << 3) | reg_map[TMP_REGISTER];
+		*inst++ = MOD_DISP8 | (reg_map[SLJIT_SAVED_REG3] << 3) | reg_map[TMP_REG1];
 		*inst++ = sizeof(sljit_sw) * 4;
 	}
 #endif
@@ -245,7 +245,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compi
 		POP_REG(reg_map[SLJIT_SAVED_REG2]);
 	if (compiler->saveds > 2)
 		POP_REG(reg_map[SLJIT_SAVED_REG3]);
-	POP_REG(reg_map[TMP_REGISTER]);
+	POP_REG(reg_map[TMP_REG1]);
 #if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
 	if (compiler->args > 2)
 		RET_I16(sizeof(sljit_sw));
@@ -301,9 +301,9 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 	/* Calculate size of b. */
 	inst_size += 1; /* mod r/m byte. */
 	if (b & SLJIT_MEM) {
-		if ((b & 0x0f) == SLJIT_UNUSED)
+		if ((b & REG_MASK) == SLJIT_UNUSED)
 			inst_size += sizeof(sljit_sw);
-		else if (immb != 0 && !(b & 0xf0)) {
+		else if (immb != 0 && !(b & OFFS_REG_MASK)) {
 			/* Immediate operand. */
 			if (immb <= 127 && immb >= -128)
 				inst_size += sizeof(sljit_sb);
@@ -311,10 +311,10 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 				inst_size += sizeof(sljit_sw);
 		}
 
-		if ((b & 0xf) == SLJIT_LOCALS_REG && !(b & 0xf0))
-			b |= SLJIT_LOCALS_REG << 4;
+		if ((b & REG_MASK) == SLJIT_LOCALS_REG && !(b & OFFS_REG_MASK))
+			b |= TO_OFFS_REG(SLJIT_LOCALS_REG);
 
-		if ((b & 0xf0) != SLJIT_UNUSED)
+		if ((b & OFFS_REG_MASK) != SLJIT_UNUSED)
 			inst_size += 1; /* SIB byte. */
 	}
 
@@ -393,8 +393,8 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 #else
 		*buf_ptr++ |= MOD_REG + reg_map[b];
 #endif
-	else if ((b & 0x0f) != SLJIT_UNUSED) {
-		if ((b & 0xf0) == SLJIT_UNUSED || (b & 0xf0) == (SLJIT_LOCALS_REG << 4)) {
+	else if ((b & REG_MASK) != SLJIT_UNUSED) {
+		if ((b & OFFS_REG_MASK) == SLJIT_UNUSED || (b & OFFS_REG_MASK) == TO_OFFS_REG(SLJIT_LOCALS_REG)) {
 			if (immb != 0) {
 				if (immb <= 127 && immb >= -128)
 					*buf_ptr |= 0x40;
@@ -402,11 +402,11 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 					*buf_ptr |= 0x80;
 			}
 
-			if ((b & 0xf0) == SLJIT_UNUSED)
-				*buf_ptr++ |= reg_map[b & 0x0f];
+			if ((b & OFFS_REG_MASK) == SLJIT_UNUSED)
+				*buf_ptr++ |= reg_map[b & REG_MASK];
 			else {
 				*buf_ptr++ |= 0x04;
-				*buf_ptr++ = reg_map[b & 0x0f] | (reg_map[(b >> 4) & 0x0f] << 3);
+				*buf_ptr++ = reg_map[b & REG_MASK] | (reg_map[OFFS_REG(b)] << 3);
 			}
 
 			if (immb != 0) {
@@ -420,7 +420,7 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 		}
 		else {
 			*buf_ptr++ |= 0x04;
-			*buf_ptr++ = reg_map[b & 0x0f] | (reg_map[(b >> 4) & 0x0f] << 3) | (immb << 6);
+			*buf_ptr++ = reg_map[b & REG_MASK] | (reg_map[OFFS_REG(b)] << 3) | (immb << 6);
 		}
 	}
 	else {
@@ -495,9 +495,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 
 	/* For UNUSED dst. Uncommon, but possible. */
 	if (dst == SLJIT_UNUSED)
-		dst = TMP_REGISTER;
+		dst = TMP_REG1;
 
-	if (dst <= TMP_REGISTER) {
+	if (FAST_IS_REG(dst)) {
 		/* Unused dest is possible here. */
 		inst = (sljit_ub*)ensure_buf(compiler, 1 + 1);
 		FAIL_IF(!inst);
@@ -524,7 +524,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 
 	CHECK_EXTRA_REGS(src, srcw, (void)0);
 
-	if (src <= TMP_REGISTER) {
+	if (FAST_IS_REG(src)) {
 		inst = (sljit_ub*)ensure_buf(compiler, 1 + 1 + 1);
 		FAIL_IF(!inst);
 
diff --git a/src/3rdparty/pcre/sljit/sljitNativeX86_64.c b/src/3rdparty/pcre/sljit/sljitNativeX86_64.c
index 28f04fddd8..967f3c3444 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeX86_64.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeX86_64.c
@@ -69,7 +69,7 @@ static sljit_ub* generate_fixed_jump(sljit_ub *code_ptr, sljit_sw addr, sljit_si
 {
 	sljit_sw delta = addr - ((sljit_sw)code_ptr + 1 + sizeof(sljit_si));
 
-	if (delta <= SLJIT_W(0x7fffffff) && delta >= SLJIT_W(-0x80000000)) {
+	if (delta <= HALFWORD_MAX && delta >= HALFWORD_MIN) {
 		*code_ptr++ = (type == 2) ? CALL_i32 : JMP_i32;
 		*(sljit_sw*)code_ptr = delta;
 	}
@@ -420,12 +420,12 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 	size &= 0xf;
 	inst_size = size;
 
-	if ((b & SLJIT_MEM) && !(b & 0xf0) && NOT_HALFWORD(immb)) {
+	if ((b & SLJIT_MEM) && !(b & OFFS_REG_MASK) && NOT_HALFWORD(immb)) {
 		if (emit_load_imm64(compiler, TMP_REG3, immb))
 			return NULL;
 		immb = 0;
-		if (b & 0xf)
-			b |= TMP_REG3 << 4;
+		if (b & REG_MASK)
+			b |= TO_OFFS_REG(TMP_REG3);
 		else
 			b |= TMP_REG3;
 	}
@@ -445,12 +445,12 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 	/* Calculate size of b. */
 	inst_size += 1; /* mod r/m byte. */
 	if (b & SLJIT_MEM) {
-		if ((b & 0x0f) == SLJIT_UNUSED)
+		if ((b & REG_MASK) == SLJIT_UNUSED)
 			inst_size += 1 + sizeof(sljit_si); /* SIB byte required to avoid RIP based addressing. */
 		else {
-			if (reg_map[b & 0x0f] >= 8)
+			if (reg_map[b & REG_MASK] >= 8)
 				rex |= REX_B;
-			if (immb != 0 && !(b & 0xf0)) {
+			if (immb != 0 && !(b & OFFS_REG_MASK)) {
 				/* Immediate operand. */
 				if (immb <= 127 && immb >= -128)
 					inst_size += sizeof(sljit_sb);
@@ -459,12 +459,12 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 			}
 		}
 
-		if ((b & 0xf) == SLJIT_LOCALS_REG && !(b & 0xf0))
-			b |= SLJIT_LOCALS_REG << 4;
+		if ((b & REG_MASK) == SLJIT_LOCALS_REG && !(b & OFFS_REG_MASK))
+			b |= TO_OFFS_REG(SLJIT_LOCALS_REG);
 
-		if ((b & 0xf0) != SLJIT_UNUSED) {
+		if ((b & OFFS_REG_MASK) != SLJIT_UNUSED) {
 			inst_size += 1; /* SIB byte. */
-			if (reg_map[(b >> 4) & 0x0f] >= 8)
+			if (reg_map[OFFS_REG(b)] >= 8)
 				rex |= REX_X;
 		}
 	}
@@ -563,8 +563,8 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 #else
 		*buf_ptr++ |= MOD_REG + reg_lmap[b];
 #endif
-	else if ((b & 0x0f) != SLJIT_UNUSED) {
-		if ((b & 0xf0) == SLJIT_UNUSED || (b & 0xf0) == (SLJIT_LOCALS_REG << 4)) {
+	else if ((b & REG_MASK) != SLJIT_UNUSED) {
+		if ((b & OFFS_REG_MASK) == SLJIT_UNUSED || (b & OFFS_REG_MASK) == TO_OFFS_REG(SLJIT_LOCALS_REG)) {
 			if (immb != 0) {
 				if (immb <= 127 && immb >= -128)
 					*buf_ptr |= 0x40;
@@ -572,11 +572,11 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 					*buf_ptr |= 0x80;
 			}
 
-			if ((b & 0xf0) == SLJIT_UNUSED)
-				*buf_ptr++ |= reg_lmap[b & 0x0f];
+			if ((b & OFFS_REG_MASK) == SLJIT_UNUSED)
+				*buf_ptr++ |= reg_lmap[b & REG_MASK];
 			else {
 				*buf_ptr++ |= 0x04;
-				*buf_ptr++ = reg_lmap[b & 0x0f] | (reg_lmap[(b >> 4) & 0x0f] << 3);
+				*buf_ptr++ = reg_lmap[b & REG_MASK] | (reg_lmap[OFFS_REG(b)] << 3);
 			}
 
 			if (immb != 0) {
@@ -590,7 +590,7 @@ static sljit_ub* emit_x86_instruction(struct sljit_compiler *compiler, sljit_si
 		}
 		else {
 			*buf_ptr++ |= 0x04;
-			*buf_ptr++ = reg_lmap[b & 0x0f] | (reg_lmap[(b >> 4) & 0x0f] << 3) | (immb << 6);
+			*buf_ptr++ = reg_lmap[b & REG_MASK] | (reg_lmap[OFFS_REG(b)] << 3) | (immb << 6);
 		}
 	}
 	else {
@@ -662,9 +662,9 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *c
 
 	/* For UNUSED dst. Uncommon, but possible. */
 	if (dst == SLJIT_UNUSED)
-		dst = TMP_REGISTER;
+		dst = TMP_REG1;
 
-	if (dst <= TMP_REGISTER) {
+	if (FAST_IS_REG(dst)) {
 		if (reg_map[dst] < 8) {
 			inst = (sljit_ub*)ensure_buf(compiler, 1 + 1);
 			FAIL_IF(!inst);
@@ -698,11 +698,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if ((src & SLJIT_IMM) && NOT_HALFWORD(srcw)) {
-		FAIL_IF(emit_load_imm64(compiler, TMP_REGISTER, srcw));
-		src = TMP_REGISTER;
+		FAIL_IF(emit_load_imm64(compiler, TMP_REG1, srcw));
+		src = TMP_REG1;
 	}
 
-	if (src <= TMP_REGISTER) {
+	if (FAST_IS_REG(src)) {
 		if (reg_map[src] < 8) {
 			inst = (sljit_ub*)ensure_buf(compiler, 1 + 1 + 1);
 			FAIL_IF(!inst);
@@ -765,7 +765,7 @@ static sljit_si emit_mov_int(struct sljit_compiler *compiler, sljit_si sign,
 		return SLJIT_SUCCESS; /* Empty instruction. */
 
 	if (src & SLJIT_IMM) {
-		if (dst <= TMP_REGISTER) {
+		if (FAST_IS_REG(dst)) {
 			if (sign || ((sljit_uw)srcw <= 0x7fffffff)) {
 				inst = emit_x86_instruction(compiler, 1, SLJIT_IMM, (sljit_sw)(sljit_si)srcw, dst, dstw);
 				FAIL_IF(!inst);
@@ -782,9 +782,9 @@ static sljit_si emit_mov_int(struct sljit_compiler *compiler, sljit_si sign,
 		return SLJIT_SUCCESS;
 	}
 
-	dst_r = (dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
 
-	if ((dst & SLJIT_MEM) && (src <= TMP_REGISTER))
+	if ((dst & SLJIT_MEM) && FAST_IS_REG(src))
 		dst_r = src;
 	else {
 		if (sign) {
diff --git a/src/3rdparty/pcre/sljit/sljitNativeX86_common.c b/src/3rdparty/pcre/sljit/sljitNativeX86_common.c
index ceb3d675b7..653705f6ca 100644
--- a/src/3rdparty/pcre/sljit/sljitNativeX86_common.c
+++ b/src/3rdparty/pcre/sljit/sljitNativeX86_common.c
@@ -64,7 +64,7 @@ SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char* sljit_get_platform_name(void)
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 
 /* Last register + 1. */
-#define TMP_REGISTER	(SLJIT_NO_REGISTERS + 1)
+#define TMP_REG1	(SLJIT_NO_REGISTERS + 1)
 
 static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 2] = {
 	0, 0, 2, 1, 0, 0, 3, 6, 7, 0, 0, 4, 5
@@ -85,7 +85,7 @@ static SLJIT_CONST sljit_ub reg_map[SLJIT_NO_REGISTERS + 2] = {
 #else /* SLJIT_CONFIG_X86_32 */
 
 /* Last register + 1. */
-#define TMP_REGISTER	(SLJIT_NO_REGISTERS + 1)
+#define TMP_REG1	(SLJIT_NO_REGISTERS + 1)
 #define TMP_REG2	(SLJIT_NO_REGISTERS + 2)
 #define TMP_REG3	(SLJIT_NO_REGISTERS + 3)
 
@@ -118,8 +118,16 @@ static SLJIT_CONST sljit_ub reg_lmap[SLJIT_NO_REGISTERS + 4] = {
 #define REX_B		0x41
 #define REX		0x40
 
-#define IS_HALFWORD(x)		((x) <= 0x7fffffffll && (x) >= -0x80000000ll)
-#define NOT_HALFWORD(x)		((x) > 0x7fffffffll || (x) < -0x80000000ll)
+#ifndef _WIN64
+#define HALFWORD_MAX 0x7fffffffl
+#define HALFWORD_MIN -0x80000000l
+#else
+#define HALFWORD_MAX 0x7fffffffll
+#define HALFWORD_MIN -0x80000000ll
+#endif
+
+#define IS_HALFWORD(x)		((x) <= HALFWORD_MAX && (x) >= HALFWORD_MIN)
+#define NOT_HALFWORD(x)		((x) > HALFWORD_MAX || (x) < HALFWORD_MIN)
 
 #define CHECK_EXTRA_REGS(p, w, do)
 
@@ -397,7 +405,7 @@ static sljit_ub* generate_near_jump_code(struct sljit_jump *jump, sljit_ub *code
 	short_jump = (sljit_sw)(label_addr - (jump->addr + 2)) >= -128 && (sljit_sw)(label_addr - (jump->addr + 2)) <= 127;
 
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-	if ((sljit_sw)(label_addr - (jump->addr + 1)) > 0x7fffffffll || (sljit_sw)(label_addr - (jump->addr + 1)) < -0x80000000ll)
+	if ((sljit_sw)(label_addr - (jump->addr + 1)) > HALFWORD_MAX || (sljit_sw)(label_addr - (jump->addr + 1)) < HALFWORD_MIN)
 		return generate_far_jump_code(jump, code_ptr, type);
 #endif
 
@@ -526,7 +534,7 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 				*(sljit_sw*)jump->addr = (sljit_sw)(jump->u.label->addr - (jump->addr + sizeof(sljit_sw)));
 #else
-				SLJIT_ASSERT((sljit_sw)(jump->u.label->addr - (jump->addr + sizeof(sljit_si))) >= -0x80000000ll && (sljit_sw)(jump->u.label->addr - (jump->addr + sizeof(sljit_si))) <= 0x7fffffffll);
+				SLJIT_ASSERT((sljit_sw)(jump->u.label->addr - (jump->addr + sizeof(sljit_si))) >= HALFWORD_MIN && (sljit_sw)(jump->u.label->addr - (jump->addr + sizeof(sljit_si))) <= HALFWORD_MAX);
 				*(sljit_si*)jump->addr = (sljit_si)(jump->u.label->addr - (jump->addr + sizeof(sljit_si)));
 #endif
 			}
@@ -534,7 +542,7 @@ SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compil
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 				*(sljit_sw*)jump->addr = (sljit_sw)(jump->u.target - (jump->addr + sizeof(sljit_sw)));
 #else
-				SLJIT_ASSERT((sljit_sw)(jump->u.target - (jump->addr + sizeof(sljit_si))) >= -0x80000000ll && (sljit_sw)(jump->u.target - (jump->addr + sizeof(sljit_si))) <= 0x7fffffffll);
+				SLJIT_ASSERT((sljit_sw)(jump->u.target - (jump->addr + sizeof(sljit_si))) >= HALFWORD_MIN && (sljit_sw)(jump->u.target - (jump->addr + sizeof(sljit_si))) <= HALFWORD_MAX);
 				*(sljit_si*)jump->addr = (sljit_si)(jump->u.target - (jump->addr + sizeof(sljit_si)));
 #endif
 			}
@@ -633,7 +641,7 @@ static void SLJIT_CALL sljit_grow_stack(sljit_sw local_size)
 	CPU cycles if the stack is large enough. However, you don't know it in
 	advance, so it must always be called. I think this is a bad design in
 	general even if it has some reasons. */
-	*(sljit_si*)alloca(local_size) = 0;
+	*(volatile sljit_si*)alloca(local_size) = 0;
 }
 
 #endif
@@ -653,20 +661,20 @@ static sljit_si emit_mov(struct sljit_compiler *compiler,
 	if (dst == SLJIT_UNUSED) {
 		/* No destination, doesn't need to setup flags. */
 		if (src & SLJIT_MEM) {
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src, srcw);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src, srcw);
 			FAIL_IF(!inst);
 			*inst = MOV_r_rm;
 		}
 		return SLJIT_SUCCESS;
 	}
-	if (src <= TMP_REGISTER) {
+	if (FAST_IS_REG(src)) {
 		inst = emit_x86_instruction(compiler, 1, src, 0, dst, dstw);
 		FAIL_IF(!inst);
 		*inst = MOV_rm_r;
 		return SLJIT_SUCCESS;
 	}
 	if (src & SLJIT_IMM) {
-		if (dst <= TMP_REGISTER) {
+		if (FAST_IS_REG(dst)) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 			return emit_do_imm(compiler, MOV_r_i32 + reg_map[dst], srcw);
 #else
@@ -692,7 +700,7 @@ static sljit_si emit_mov(struct sljit_compiler *compiler,
 		*inst = MOV_rm_i32;
 		return SLJIT_SUCCESS;
 	}
-	if (dst <= TMP_REGISTER) {
+	if (FAST_IS_REG(dst)) {
 		inst = emit_x86_instruction(compiler, 1, dst, 0, src, srcw);
 		FAIL_IF(!inst);
 		*inst = MOV_r_rm;
@@ -700,10 +708,10 @@ static sljit_si emit_mov(struct sljit_compiler *compiler,
 	}
 
 	/* Memory to memory move. Requires two instruction. */
-	inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src, srcw);
+	inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src, srcw);
 	FAIL_IF(!inst);
 	*inst = MOV_r_rm;
-	inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, dst, dstw);
+	inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, dst, dstw);
 	FAIL_IF(!inst);
 	*inst = MOV_rm_r;
 	return SLJIT_SUCCESS;
@@ -745,13 +753,13 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 		SLJIT_COMPILE_ASSERT(
 			reg_map[SLJIT_SCRATCH_REG1] == 0
 			&& reg_map[SLJIT_SCRATCH_REG2] == 2
-			&& reg_map[TMP_REGISTER] > 7,
+			&& reg_map[TMP_REG1] > 7,
 			invalid_register_assignment_for_div_mul);
 #else
 		SLJIT_COMPILE_ASSERT(
 			reg_map[SLJIT_SCRATCH_REG1] == 0
 			&& reg_map[SLJIT_SCRATCH_REG2] < 7
-			&& reg_map[TMP_REGISTER] == 2,
+			&& reg_map[TMP_REG1] == 2,
 			invalid_register_assignment_for_div_mul);
 #endif
 		compiler->mode32 = op & SLJIT_INT_OP;
@@ -760,10 +768,10 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 		op = GET_OPCODE(op);
 		if (op == SLJIT_UDIV) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || defined(_WIN64)
-			EMIT_MOV(compiler, TMP_REGISTER, 0, SLJIT_SCRATCH_REG2, 0);
+			EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_SCRATCH_REG2, 0);
 			inst = emit_x86_instruction(compiler, 1, SLJIT_SCRATCH_REG2, 0, SLJIT_SCRATCH_REG2, 0);
 #else
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, TMP_REGISTER, 0);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, TMP_REG1, 0);
 #endif
 			FAIL_IF(!inst);
 			*inst = XOR_r_rm;
@@ -771,7 +779,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 
 		if (op == SLJIT_SDIV) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || defined(_WIN64)
-			EMIT_MOV(compiler, TMP_REGISTER, 0, SLJIT_SCRATCH_REG2, 0);
+			EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_SCRATCH_REG2, 0);
 #endif
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
@@ -800,7 +808,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 		FAIL_IF(!inst);
 		INC_SIZE(2);
 		*inst++ = GROUP_F7;
-		*inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_map[TMP_REGISTER] : reg_map[SLJIT_SCRATCH_REG2]);
+		*inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_map[TMP_REG1] : reg_map[SLJIT_SCRATCH_REG2]);
 #else
 #ifdef _WIN64
 		size = (!compiler->mode32 || op >= SLJIT_UDIV) ? 3 : 2;
@@ -816,7 +824,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 		else if (op >= SLJIT_UDIV)
 			*inst++ = REX_B;
 		*inst++ = GROUP_F7;
-		*inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_lmap[TMP_REGISTER] : reg_lmap[SLJIT_SCRATCH_REG2]);
+		*inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_lmap[TMP_REG1] : reg_lmap[SLJIT_SCRATCH_REG2]);
 #else
 		if (!compiler->mode32)
 			*inst++ = REX_W;
@@ -839,7 +847,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler
 			break;
 		}
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && !defined(_WIN64)
-		EMIT_MOV(compiler, SLJIT_SCRATCH_REG2, 0, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, SLJIT_SCRATCH_REG2, 0, TMP_REG1, 0);
 #endif
 		break;
 	}
@@ -873,7 +881,7 @@ static sljit_si emit_mov_byte(struct sljit_compiler *compiler, sljit_si sign,
 		return SLJIT_SUCCESS; /* Empty instruction. */
 
 	if (src & SLJIT_IMM) {
-		if (dst <= TMP_REGISTER) {
+		if (FAST_IS_REG(dst)) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 			return emit_do_imm(compiler, MOV_r_i32 + reg_map[dst], srcw);
 #else
@@ -889,13 +897,13 @@ static sljit_si emit_mov_byte(struct sljit_compiler *compiler, sljit_si sign,
 		return SLJIT_SUCCESS;
 	}
 
-	dst_r = (dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
 
-	if ((dst & SLJIT_MEM) && src <= TMP_REGISTER) {
+	if ((dst & SLJIT_MEM) && FAST_IS_REG(src)) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 		if (reg_map[src] >= 4) {
-			SLJIT_ASSERT(dst_r == TMP_REGISTER);
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src, 0);
+			SLJIT_ASSERT(dst_r == TMP_REG1);
+			EMIT_MOV(compiler, TMP_REG1, 0, src, 0);
 		} else
 			dst_r = src;
 #else
@@ -903,9 +911,9 @@ static sljit_si emit_mov_byte(struct sljit_compiler *compiler, sljit_si sign,
 #endif
 	}
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-	else if (src <= TMP_REGISTER && reg_map[src] >= 4) {
+	else if (FAST_IS_REG(src) && reg_map[src] >= 4) {
 		/* src, dst are registers. */
-		SLJIT_ASSERT(dst >= SLJIT_SCRATCH_REG1 && dst <= TMP_REGISTER);
+		SLJIT_ASSERT(SLOW_IS_REG(dst));
 		if (reg_map[dst] < 4) {
 			if (dst != src)
 				EMIT_MOV(compiler, dst, 0, src, 0);
@@ -946,25 +954,25 @@ static sljit_si emit_mov_byte(struct sljit_compiler *compiler, sljit_si sign,
 
 	if (dst & SLJIT_MEM) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-		if (dst_r == TMP_REGISTER) {
+		if (dst_r == TMP_REG1) {
 			/* Find a non-used register, whose reg_map[src] < 4. */
-			if ((dst & 0xf) == SLJIT_SCRATCH_REG1) {
-				if ((dst & 0xf0) == (SLJIT_SCRATCH_REG2 << 4))
+			if ((dst & REG_MASK) == SLJIT_SCRATCH_REG1) {
+				if ((dst & OFFS_REG_MASK) == TO_OFFS_REG(SLJIT_SCRATCH_REG2))
 					work_r = SLJIT_SCRATCH_REG3;
 				else
 					work_r = SLJIT_SCRATCH_REG2;
 			}
 			else {
-				if ((dst & 0xf0) != (SLJIT_SCRATCH_REG1 << 4))
+				if ((dst & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SCRATCH_REG1))
 					work_r = SLJIT_SCRATCH_REG1;
-				else if ((dst & 0xf) == SLJIT_SCRATCH_REG2)
+				else if ((dst & REG_MASK) == SLJIT_SCRATCH_REG2)
 					work_r = SLJIT_SCRATCH_REG3;
 				else
 					work_r = SLJIT_SCRATCH_REG2;
 			}
 
 			if (work_r == SLJIT_SCRATCH_REG1) {
-				ENCODE_PREFIX(XCHG_EAX_r + reg_map[TMP_REGISTER]);
+				ENCODE_PREFIX(XCHG_EAX_r + reg_map[TMP_REG1]);
 			}
 			else {
 				inst = emit_x86_instruction(compiler, 1, work_r, 0, dst_r, 0);
@@ -977,7 +985,7 @@ static sljit_si emit_mov_byte(struct sljit_compiler *compiler, sljit_si sign,
 			*inst = MOV_rm8_r8;
 
 			if (work_r == SLJIT_SCRATCH_REG1) {
-				ENCODE_PREFIX(XCHG_EAX_r + reg_map[TMP_REGISTER]);
+				ENCODE_PREFIX(XCHG_EAX_r + reg_map[TMP_REG1]);
 			}
 			else {
 				inst = emit_x86_instruction(compiler, 1, work_r, 0, dst_r, 0);
@@ -1015,7 +1023,7 @@ static sljit_si emit_mov_half(struct sljit_compiler *compiler, sljit_si sign,
 		return SLJIT_SUCCESS; /* Empty instruction. */
 
 	if (src & SLJIT_IMM) {
-		if (dst <= TMP_REGISTER) {
+		if (FAST_IS_REG(dst)) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 			return emit_do_imm(compiler, MOV_r_i32 + reg_map[dst], srcw);
 #else
@@ -1031,9 +1039,9 @@ static sljit_si emit_mov_half(struct sljit_compiler *compiler, sljit_si sign,
 		return SLJIT_SUCCESS;
 	}
 
-	dst_r = (dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
 
-	if ((dst & SLJIT_MEM) && src <= TMP_REGISTER)
+	if ((dst & SLJIT_MEM) && FAST_IS_REG(src))
 		dst_r = src;
 	else {
 		inst = emit_x86_instruction(compiler, 2, dst_r, 0, src, srcw);
@@ -1058,8 +1066,8 @@ static sljit_si emit_unary(struct sljit_compiler *compiler, sljit_ub opcode,
 	sljit_ub* inst;
 
 	if (dst == SLJIT_UNUSED) {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src, srcw);
-		inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, TMP_REG1, 0, src, srcw);
+		inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst++ = GROUP_F7;
 		*inst |= opcode;
@@ -1073,7 +1081,7 @@ static sljit_si emit_unary(struct sljit_compiler *compiler, sljit_ub opcode,
 		*inst |= opcode;
 		return SLJIT_SUCCESS;
 	}
-	if (dst <= TMP_REGISTER) {
+	if (FAST_IS_REG(dst)) {
 		EMIT_MOV(compiler, dst, 0, src, srcw);
 		inst = emit_x86_instruction(compiler, 1, 0, 0, dst, dstw);
 		FAIL_IF(!inst);
@@ -1081,12 +1089,12 @@ static sljit_si emit_unary(struct sljit_compiler *compiler, sljit_ub opcode,
 		*inst |= opcode;
 		return SLJIT_SUCCESS;
 	}
-	EMIT_MOV(compiler, TMP_REGISTER, 0, src, srcw);
-	inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REGISTER, 0);
+	EMIT_MOV(compiler, TMP_REG1, 0, src, srcw);
+	inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REG1, 0);
 	FAIL_IF(!inst);
 	*inst++ = GROUP_F7;
 	*inst |= opcode;
-	EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+	EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 	return SLJIT_SUCCESS;
 }
 
@@ -1097,17 +1105,17 @@ static sljit_si emit_not_with_flags(struct sljit_compiler *compiler,
 	sljit_ub* inst;
 
 	if (dst == SLJIT_UNUSED) {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src, srcw);
-		inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, TMP_REG1, 0, src, srcw);
+		inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst++ = GROUP_F7;
 		*inst |= NOT_rm;
-		inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst = OR_r_rm;
 		return SLJIT_SUCCESS;
 	}
-	if (dst <= TMP_REGISTER) {
+	if (FAST_IS_REG(dst)) {
 		EMIT_MOV(compiler, dst, 0, src, srcw);
 		inst = emit_x86_instruction(compiler, 1, 0, 0, dst, dstw);
 		FAIL_IF(!inst);
@@ -1118,15 +1126,15 @@ static sljit_si emit_not_with_flags(struct sljit_compiler *compiler,
 		*inst = OR_r_rm;
 		return SLJIT_SUCCESS;
 	}
-	EMIT_MOV(compiler, TMP_REGISTER, 0, src, srcw);
-	inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REGISTER, 0);
+	EMIT_MOV(compiler, TMP_REG1, 0, src, srcw);
+	inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REG1, 0);
 	FAIL_IF(!inst);
 	*inst++ = GROUP_F7;
 	*inst |= NOT_rm;
-	inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, TMP_REGISTER, 0);
+	inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, TMP_REG1, 0);
 	FAIL_IF(!inst);
 	*inst = OR_r_rm;
-	EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+	EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 	return SLJIT_SUCCESS;
 }
 
@@ -1140,15 +1148,15 @@ static sljit_si emit_clz(struct sljit_compiler *compiler, sljit_si op_flags,
 	SLJIT_UNUSED_ARG(op_flags);
 	if (SLJIT_UNLIKELY(dst == SLJIT_UNUSED)) {
 		/* Just set the zero flag. */
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src, srcw);
-		inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, TMP_REG1, 0, src, srcw);
+		inst = emit_x86_instruction(compiler, 1, 0, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst++ = GROUP_F7;
 		*inst |= NOT_rm;
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_IMM, 31, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_IMM, 31, TMP_REG1, 0);
 #else
-		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_IMM, !(op_flags & SLJIT_INT_OP) ? 63 : 31, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_IMM, !(op_flags & SLJIT_INT_OP) ? 63 : 31, TMP_REG1, 0);
 #endif
 		FAIL_IF(!inst);
 		*inst |= SHR;
@@ -1156,24 +1164,24 @@ static sljit_si emit_clz(struct sljit_compiler *compiler, sljit_si op_flags,
 	}
 
 	if (SLJIT_UNLIKELY(src & SLJIT_IMM)) {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, SLJIT_IMM, srcw);
-		src = TMP_REGISTER;
+		EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_IMM, srcw);
+		src = TMP_REG1;
 		srcw = 0;
 	}
 
-	inst = emit_x86_instruction(compiler, 2, TMP_REGISTER, 0, src, srcw);
+	inst = emit_x86_instruction(compiler, 2, TMP_REG1, 0, src, srcw);
 	FAIL_IF(!inst);
 	*inst++ = GROUP_0F;
 	*inst = BSR_r_rm;
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-	if (dst <= TMP_REGISTER)
+	if (FAST_IS_REG(dst))
 		dst_r = dst;
 	else {
 		/* Find an unused temporary register. */
-		if ((dst & 0xf) != SLJIT_SCRATCH_REG1 && (dst & 0xf0) != (SLJIT_SCRATCH_REG1 << 4))
+		if ((dst & REG_MASK) != SLJIT_SCRATCH_REG1 && (dst & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SCRATCH_REG1))
 			dst_r = SLJIT_SCRATCH_REG1;
-		else if ((dst & 0xf) != SLJIT_SCRATCH_REG2 && (dst & 0xf0) != (SLJIT_SCRATCH_REG2 << 4))
+		else if ((dst & REG_MASK) != SLJIT_SCRATCH_REG2 && (dst & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SCRATCH_REG2))
 			dst_r = SLJIT_SCRATCH_REG2;
 		else
 			dst_r = SLJIT_SCRATCH_REG3;
@@ -1181,7 +1189,7 @@ static sljit_si emit_clz(struct sljit_compiler *compiler, sljit_si op_flags,
 	}
 	EMIT_MOV(compiler, dst_r, 0, SLJIT_IMM, 32 + 31);
 #else
-	dst_r = (dst <= TMP_REGISTER) ? dst : TMP_REG2;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
 	compiler->mode32 = 0;
 	EMIT_MOV(compiler, dst_r, 0, SLJIT_IMM, !(op_flags & SLJIT_INT_OP) ? 64 + 63 : 32 + 31);
 	compiler->mode32 = op_flags & SLJIT_INT_OP;
@@ -1191,7 +1199,7 @@ static sljit_si emit_clz(struct sljit_compiler *compiler, sljit_si op_flags,
 		get_cpu_features();
 
 	if (cpu_has_cmov) {
-		inst = emit_x86_instruction(compiler, 2, dst_r, 0, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 2, dst_r, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst++ = GROUP_0F;
 		*inst = CMOVNE_r_rm;
@@ -1204,7 +1212,7 @@ static sljit_si emit_clz(struct sljit_compiler *compiler, sljit_si op_flags,
 		*inst++ = JE_i8;
 		*inst++ = 2;
 		*inst++ = MOV_r_rm;
-		*inst++ = MOD_REG | (reg_map[dst_r] << 3) | reg_map[TMP_REGISTER];
+		*inst++ = MOD_REG | (reg_map[dst_r] << 3) | reg_map[TMP_REG1];
 #else
 		inst = (sljit_ub*)ensure_buf(compiler, 1 + 5);
 		FAIL_IF(!inst);
@@ -1212,9 +1220,9 @@ static sljit_si emit_clz(struct sljit_compiler *compiler, sljit_si op_flags,
 
 		*inst++ = JE_i8;
 		*inst++ = 3;
-		*inst++ = REX_W | (reg_map[dst_r] >= 8 ? REX_R : 0) | (reg_map[TMP_REGISTER] >= 8 ? REX_B : 0);
+		*inst++ = REX_W | (reg_map[dst_r] >= 8 ? REX_R : 0) | (reg_map[TMP_REG1] >= 8 ? REX_B : 0);
 		*inst++ = MOV_r_rm;
-		*inst++ = MOD_REG | (reg_lmap[dst_r] << 3) | reg_lmap[TMP_REGISTER];
+		*inst++ = MOD_REG | (reg_lmap[dst_r] << 3) | reg_lmap[TMP_REG1];
 #endif
 	}
 
@@ -1271,7 +1279,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 #endif
 
 		if (op_flags & SLJIT_INT_OP) {
-			if (src <= TMP_REGISTER && src == dst) {
+			if (FAST_IS_REG(src) && src == dst) {
 				if (!TYPE_CAST_NEEDED(op))
 					return SLJIT_SUCCESS;
 			}
@@ -1322,8 +1330,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 #endif
 		}
 
-		if (SLJIT_UNLIKELY(update) && (src & SLJIT_MEM) && !src_is_ereg && (src & 0xf) && (srcw != 0 || (src & 0xf0) != 0)) {
-			inst = emit_x86_instruction(compiler, 1, src & 0xf, 0, src, srcw);
+		if (SLJIT_UNLIKELY(update) && (src & SLJIT_MEM) && !src_is_ereg && (src & REG_MASK) && (srcw != 0 || (src & OFFS_REG_MASK) != 0)) {
+			inst = emit_x86_instruction(compiler, 1, src & REG_MASK, 0, src, srcw);
 			FAIL_IF(!inst);
 			*inst = LEA_r_m;
 			src &= SLJIT_MEM | 0xf;
@@ -1333,7 +1341,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 		if (SLJIT_UNLIKELY(dst_is_ereg) && (!(op == SLJIT_MOV || op == SLJIT_MOV_UI || op == SLJIT_MOV_SI || op == SLJIT_MOV_P) || (src & SLJIT_MEM))) {
 			SLJIT_ASSERT(dst == SLJIT_MEM1(SLJIT_LOCALS_REG));
-			dst = TMP_REGISTER;
+			dst = TMP_REG1;
 		}
 #endif
 
@@ -1369,12 +1377,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler
 		}
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-		if (SLJIT_UNLIKELY(dst_is_ereg) && dst == TMP_REGISTER)
-			return emit_mov(compiler, SLJIT_MEM1(SLJIT_LOCALS_REG), dstw, TMP_REGISTER, 0);
+		if (SLJIT_UNLIKELY(dst_is_ereg) && dst == TMP_REG1)
+			return emit_mov(compiler, SLJIT_MEM1(SLJIT_LOCALS_REG), dstw, TMP_REG1, 0);
 #endif
 
-		if (SLJIT_UNLIKELY(update) && (dst & SLJIT_MEM) && (dst & 0xf) && (dstw != 0 || (dst & 0xf0) != 0)) {
-			inst = emit_x86_instruction(compiler, 1, dst & 0xf, 0, dst, dstw);
+		if (SLJIT_UNLIKELY(update) && (dst & SLJIT_MEM) && (dst & REG_MASK) && (dstw != 0 || (dst & OFFS_REG_MASK) != 0)) {
+			inst = emit_x86_instruction(compiler, 1, dst & REG_MASK, 0, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = LEA_r_m;
 		}
@@ -1447,12 +1455,12 @@ static sljit_si emit_cum_binary(struct sljit_compiler *compiler,
 	sljit_ub* inst;
 
 	if (dst == SLJIT_UNUSED) {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 		if (src2 & SLJIT_IMM) {
-			BINARY_IMM(op_imm, op_mr, src2w, TMP_REGISTER, 0);
+			BINARY_IMM(op_imm, op_mr, src2w, TMP_REG1, 0);
 		}
 		else {
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src2, src2w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src2, src2w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
@@ -1472,20 +1480,20 @@ static sljit_si emit_cum_binary(struct sljit_compiler *compiler,
 				BINARY_IMM(op_imm, op_mr, src2w, dst, dstw);
 			}
 		}
-		else if (dst <= TMP_REGISTER) {
+		else if (FAST_IS_REG(dst)) {
 			inst = emit_x86_instruction(compiler, 1, dst, dstw, src2, src2w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
-		else if (src2 <= TMP_REGISTER) {
+		else if (FAST_IS_REG(src2)) {
 			/* Special exception for sljit_emit_op_flags. */
 			inst = emit_x86_instruction(compiler, 1, src2, src2w, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = op_mr;
 		}
 		else {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src2, src2w);
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, dst, dstw);
+			EMIT_MOV(compiler, TMP_REG1, 0, src2, src2w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = op_mr;
 		}
@@ -1506,19 +1514,19 @@ static sljit_si emit_cum_binary(struct sljit_compiler *compiler,
 				BINARY_IMM(op_imm, op_mr, src1w, dst, dstw);
 			}
 		}
-		else if (dst <= TMP_REGISTER) {
+		else if (FAST_IS_REG(dst)) {
 			inst = emit_x86_instruction(compiler, 1, dst, dstw, src1, src1w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
-		else if (src1 <= TMP_REGISTER) {
+		else if (FAST_IS_REG(src1)) {
 			inst = emit_x86_instruction(compiler, 1, src1, src1w, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = op_mr;
 		}
 		else {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, dst, dstw);
+			EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = op_mr;
 		}
@@ -1526,7 +1534,7 @@ static sljit_si emit_cum_binary(struct sljit_compiler *compiler,
 	}
 
 	/* General version. */
-	if (dst <= TMP_REGISTER) {
+	if (FAST_IS_REG(dst)) {
 		EMIT_MOV(compiler, dst, 0, src1, src1w);
 		if (src2 & SLJIT_IMM) {
 			BINARY_IMM(op_imm, op_mr, src2w, dst, 0);
@@ -1539,16 +1547,16 @@ static sljit_si emit_cum_binary(struct sljit_compiler *compiler,
 	}
 	else {
 		/* This version requires less memory writing. */
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 		if (src2 & SLJIT_IMM) {
-			BINARY_IMM(op_imm, op_mr, src2w, TMP_REGISTER, 0);
+			BINARY_IMM(op_imm, op_mr, src2w, TMP_REG1, 0);
 		}
 		else {
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src2, src2w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src2, src2w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
-		EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 	}
 
 	return SLJIT_SUCCESS;
@@ -1563,12 +1571,12 @@ static sljit_si emit_non_cum_binary(struct sljit_compiler *compiler,
 	sljit_ub* inst;
 
 	if (dst == SLJIT_UNUSED) {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 		if (src2 & SLJIT_IMM) {
-			BINARY_IMM(op_imm, op_mr, src2w, TMP_REGISTER, 0);
+			BINARY_IMM(op_imm, op_mr, src2w, TMP_REG1, 0);
 		}
 		else {
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src2, src2w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src2, src2w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
@@ -1588,19 +1596,19 @@ static sljit_si emit_non_cum_binary(struct sljit_compiler *compiler,
 				BINARY_IMM(op_imm, op_mr, src2w, dst, dstw);
 			}
 		}
-		else if (dst <= TMP_REGISTER) {
+		else if (FAST_IS_REG(dst)) {
 			inst = emit_x86_instruction(compiler, 1, dst, dstw, src2, src2w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
-		else if (src2 <= TMP_REGISTER) {
+		else if (FAST_IS_REG(src2)) {
 			inst = emit_x86_instruction(compiler, 1, src2, src2w, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = op_mr;
 		}
 		else {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src2, src2w);
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, dst, dstw);
+			EMIT_MOV(compiler, TMP_REG1, 0, src2, src2w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, dst, dstw);
 			FAIL_IF(!inst);
 			*inst = op_mr;
 		}
@@ -1608,7 +1616,7 @@ static sljit_si emit_non_cum_binary(struct sljit_compiler *compiler,
 	}
 
 	/* General version. */
-	if (dst <= TMP_REGISTER && dst != src2) {
+	if (FAST_IS_REG(dst) && dst != src2) {
 		EMIT_MOV(compiler, dst, 0, src1, src1w);
 		if (src2 & SLJIT_IMM) {
 			BINARY_IMM(op_imm, op_mr, src2w, dst, 0);
@@ -1621,16 +1629,16 @@ static sljit_si emit_non_cum_binary(struct sljit_compiler *compiler,
 	}
 	else {
 		/* This version requires less memory writing. */
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 		if (src2 & SLJIT_IMM) {
-			BINARY_IMM(op_imm, op_mr, src2w, TMP_REGISTER, 0);
+			BINARY_IMM(op_imm, op_mr, src2w, TMP_REG1, 0);
 		}
 		else {
-			inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src2, src2w);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src2, src2w);
 			FAIL_IF(!inst);
 			*inst = op_rm;
 		}
-		EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 	}
 
 	return SLJIT_SUCCESS;
@@ -1644,7 +1652,7 @@ static sljit_si emit_mul(struct sljit_compiler *compiler,
 	sljit_ub* inst;
 	sljit_si dst_r;
 
-	dst_r = (dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
 
 	/* Register destination. */
 	if (dst_r == src1 && !(src2 & SLJIT_IMM)) {
@@ -1752,7 +1760,7 @@ static sljit_si emit_mul(struct sljit_compiler *compiler,
 	else {
 		/* Neither argument is immediate. */
 		if (ADDRESSING_DEPENDS_ON(src2, dst_r))
-			dst_r = TMP_REGISTER;
+			dst_r = TMP_REG1;
 		EMIT_MOV(compiler, dst_r, 0, src1, src1w);
 		inst = emit_x86_instruction(compiler, 2, dst_r, 0, src2, src2w);
 		FAIL_IF(!inst);
@@ -1760,8 +1768,8 @@ static sljit_si emit_mul(struct sljit_compiler *compiler,
 		*inst = IMUL_r_rm;
 	}
 
-	if (dst_r == TMP_REGISTER)
-		EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+	if (dst_r == TMP_REG1)
+		EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 
 	return SLJIT_SUCCESS;
 }
@@ -1782,10 +1790,10 @@ static sljit_si emit_lea_binary(struct sljit_compiler *compiler, sljit_si keep_f
 			return SLJIT_ERR_UNSUPPORTED;
 	}
 
-	dst_r = (dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
 
-	if (src1 <= TMP_REGISTER) {
-		if (src2 <= TMP_REGISTER || src2 == TMP_REGISTER) {
+	if (FAST_IS_REG(src1)) {
+		if (FAST_IS_REG(src2)) {
 			inst = emit_x86_instruction(compiler, 1, dst_r, 0, SLJIT_MEM2(src1, src2), 0);
 			FAIL_IF(!inst);
 			*inst = LEA_r_m;
@@ -1803,7 +1811,7 @@ static sljit_si emit_lea_binary(struct sljit_compiler *compiler, sljit_si keep_f
 			done = 1;
 		}
 	}
-	else if (src2 <= TMP_REGISTER) {
+	else if (FAST_IS_REG(src2)) {
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 		if ((src1 & SLJIT_IMM) && (compiler->mode32 || IS_HALFWORD(src1w))) {
 			inst = emit_x86_instruction(compiler, 1, dst_r, 0, SLJIT_MEM1(src2), (sljit_si)src1w);
@@ -1818,8 +1826,8 @@ static sljit_si emit_lea_binary(struct sljit_compiler *compiler, sljit_si keep_f
 	}
 
 	if (done) {
-		if (dst_r == TMP_REGISTER)
-			return emit_mov(compiler, dst, dstw, TMP_REGISTER, 0);
+		if (dst_r == TMP_REG1)
+			return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
 		return SLJIT_SUCCESS;
 	}
 	return SLJIT_ERR_UNSUPPORTED;
@@ -1840,7 +1848,7 @@ static sljit_si emit_cmp_binary(struct sljit_compiler *compiler,
 		return SLJIT_SUCCESS;
 	}
 
-	if (src1 <= TMP_REGISTER) {
+	if (FAST_IS_REG(src1)) {
 		if (src2 & SLJIT_IMM) {
 			BINARY_IMM(CMP, CMP_rm_r, src2w, src1, 0);
 		}
@@ -1852,7 +1860,7 @@ static sljit_si emit_cmp_binary(struct sljit_compiler *compiler,
 		return SLJIT_SUCCESS;
 	}
 
-	if (src2 <= TMP_REGISTER && !(src1 & SLJIT_IMM)) {
+	if (FAST_IS_REG(src2) && !(src1 & SLJIT_IMM)) {
 		inst = emit_x86_instruction(compiler, 1, src2, 0, src1, src1w);
 		FAIL_IF(!inst);
 		*inst = CMP_rm_r;
@@ -1861,15 +1869,15 @@ static sljit_si emit_cmp_binary(struct sljit_compiler *compiler,
 
 	if (src2 & SLJIT_IMM) {
 		if (src1 & SLJIT_IMM) {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
-			src1 = TMP_REGISTER;
+			EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
+			src1 = TMP_REG1;
 			src1w = 0;
 		}
 		BINARY_IMM(CMP, CMP_rm_r, src2w, src1, src1w);
 	}
 	else {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
-		inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src2, src2w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
+		inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src2, src2w);
 		FAIL_IF(!inst);
 		*inst = CMP_r_rm;
 	}
@@ -1900,7 +1908,7 @@ static sljit_si emit_test_binary(struct sljit_compiler *compiler,
 		return SLJIT_SUCCESS;
 	}
 
-	if (src1 <= TMP_REGISTER) {
+	if (FAST_IS_REG(src1)) {
 		if (src2 & SLJIT_IMM) {
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 			if (IS_HALFWORD(src2w) || compiler->mode32) {
@@ -1928,7 +1936,7 @@ static sljit_si emit_test_binary(struct sljit_compiler *compiler,
 		return SLJIT_SUCCESS;
 	}
 
-	if (src2 <= TMP_REGISTER) {
+	if (FAST_IS_REG(src2)) {
 		if (src1 & SLJIT_IMM) {
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 			if (IS_HALFWORD(src1w) || compiler->mode32) {
@@ -1956,28 +1964,28 @@ static sljit_si emit_test_binary(struct sljit_compiler *compiler,
 		return SLJIT_SUCCESS;
 	}
 
-	EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+	EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 	if (src2 & SLJIT_IMM) {
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 		if (IS_HALFWORD(src2w) || compiler->mode32) {
-			inst = emit_x86_instruction(compiler, 1, SLJIT_IMM, src2w, TMP_REGISTER, 0);
+			inst = emit_x86_instruction(compiler, 1, SLJIT_IMM, src2w, TMP_REG1, 0);
 			FAIL_IF(!inst);
 			*inst = GROUP_F7;
 		}
 		else {
 			FAIL_IF(emit_load_imm64(compiler, TMP_REG2, src2w));
-			inst = emit_x86_instruction(compiler, 1, TMP_REG2, 0, TMP_REGISTER, 0);
+			inst = emit_x86_instruction(compiler, 1, TMP_REG2, 0, TMP_REG1, 0);
 			FAIL_IF(!inst);
 			*inst = TEST_rm_r;
 		}
 #else
-		inst = emit_x86_instruction(compiler, 1, SLJIT_IMM, src2w, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 1, SLJIT_IMM, src2w, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst = GROUP_F7;
 #endif
 	}
 	else {
-		inst = emit_x86_instruction(compiler, 1, TMP_REGISTER, 0, src2, src2w);
+		inst = emit_x86_instruction(compiler, 1, TMP_REG1, 0, src2, src2w);
 		FAIL_IF(!inst);
 		*inst = TEST_rm_r;
 	}
@@ -2000,21 +2008,21 @@ static sljit_si emit_shift(struct sljit_compiler *compiler,
 			return SLJIT_SUCCESS;
 		}
 		if (dst == SLJIT_UNUSED) {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
-			inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, src2, src2w, TMP_REGISTER, 0);
+			EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
+			inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, src2, src2w, TMP_REG1, 0);
 			FAIL_IF(!inst);
 			*inst |= mode;
 			return SLJIT_SUCCESS;
 		}
 		if (dst == SLJIT_PREF_SHIFT_REG && src2 == SLJIT_PREF_SHIFT_REG) {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
-			inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, TMP_REGISTER, 0);
+			EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
+			inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, TMP_REG1, 0);
 			FAIL_IF(!inst);
 			*inst |= mode;
-			EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, TMP_REGISTER, 0);
+			EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, TMP_REG1, 0);
 			return SLJIT_SUCCESS;
 		}
-		if (dst <= TMP_REGISTER) {
+		if (FAST_IS_REG(dst)) {
 			EMIT_MOV(compiler, dst, 0, src1, src1w);
 			inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, src2, src2w, dst, 0);
 			FAIL_IF(!inst);
@@ -2022,36 +2030,36 @@ static sljit_si emit_shift(struct sljit_compiler *compiler,
 			return SLJIT_SUCCESS;
 		}
 
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
-		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, src2, src2w, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
+		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, src2, src2w, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst |= mode;
-		EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 		return SLJIT_SUCCESS;
 	}
 
 	if (dst == SLJIT_PREF_SHIFT_REG) {
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, src2, src2w);
-		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst |= mode;
-		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, TMP_REG1, 0);
 	}
-	else if (dst <= TMP_REGISTER && dst != src2 && !ADDRESSING_DEPENDS_ON(src2, dst)) {
+	else if (FAST_IS_REG(dst) && dst != src2 && !ADDRESSING_DEPENDS_ON(src2, dst)) {
 		if (src1 != dst)
 			EMIT_MOV(compiler, dst, 0, src1, src1w);
-		EMIT_MOV(compiler, TMP_REGISTER, 0, SLJIT_PREF_SHIFT_REG, 0);
+		EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_PREF_SHIFT_REG, 0);
 		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, src2, src2w);
 		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, dst, 0);
 		FAIL_IF(!inst);
 		*inst |= mode;
-		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, TMP_REG1, 0);
 	}
 	else {
 		/* This case is really difficult, since ecx itself may used for
 		   addressing, and we must ensure to work even in that case. */
-		EMIT_MOV(compiler, TMP_REGISTER, 0, src1, src1w);
+		EMIT_MOV(compiler, TMP_REG1, 0, src1, src1w);
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 		EMIT_MOV(compiler, TMP_REG2, 0, SLJIT_PREF_SHIFT_REG, 0);
 #else
@@ -2059,7 +2067,7 @@ static sljit_si emit_shift(struct sljit_compiler *compiler,
 		EMIT_MOV(compiler, SLJIT_MEM1(SLJIT_LOCALS_REG), sizeof(sljit_sw), SLJIT_PREF_SHIFT_REG, 0);
 #endif
 		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, src2, src2w);
-		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, TMP_REGISTER, 0);
+		inst = emit_x86_instruction(compiler, 1 | EX86_SHIFT_INS, SLJIT_PREF_SHIFT_REG, 0, TMP_REG1, 0);
 		FAIL_IF(!inst);
 		*inst |= mode;
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
@@ -2067,7 +2075,7 @@ static sljit_si emit_shift(struct sljit_compiler *compiler,
 #else
 		EMIT_MOV(compiler, SLJIT_PREF_SHIFT_REG, 0, SLJIT_MEM1(SLJIT_LOCALS_REG), sizeof(sljit_sw));
 #endif
-		EMIT_MOV(compiler, dst, dstw, TMP_REGISTER, 0);
+		EMIT_MOV(compiler, dst, dstw, TMP_REG1, 0);
 	}
 
 	return SLJIT_SUCCESS;
@@ -2098,12 +2106,12 @@ static sljit_si emit_shift_with_flags(struct sljit_compiler *compiler,
 	if (!set_flags)
 		return emit_shift(compiler, mode, dst, dstw, src1, src1w, src2, src2w);
 
-	if (!(dst <= TMP_REGISTER))
+	if (!FAST_IS_REG(dst))
 		FAIL_IF(emit_cmp_binary(compiler, src1, src1w, SLJIT_IMM, 0));
 
 	FAIL_IF(emit_shift(compiler,mode, dst, dstw, src1, src1w, src2, src2w));
 
-	if (dst <= TMP_REGISTER)
+	if (FAST_IS_REG(dst))
 		return emit_cmp_binary(compiler, dst, dstw, SLJIT_IMM, 0);
 	return SLJIT_SUCCESS;
 }
@@ -2263,7 +2271,9 @@ static void init_compiler(void)
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void)
 {
-#if (defined SLJIT_SSE2 && SLJIT_SSE2)
+#ifdef SLJIT_IS_FPU_AVAILABLE
+	return SLJIT_IS_FPU_AVAILABLE;
+#elif (defined SLJIT_SSE2 && SLJIT_SSE2)
 #if (defined SLJIT_DETECT_SSE2 && SLJIT_DETECT_SSE2)
 	if (cpu_has_sse2 == -1)
 		get_cpu_features();
@@ -2329,7 +2339,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 
 	if (GET_OPCODE(op) == SLJIT_CMPD) {
 		compiler->flags_saved = 0;
-		if (dst <= SLJIT_FLOAT_REG6)
+		if (FAST_IS_REG(dst))
 			dst_r = dst;
 		else {
 			dst_r = TMP_FREG;
@@ -2339,15 +2349,15 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compile
 	}
 
 	if (op == SLJIT_MOVD) {
-		if (dst <= SLJIT_FLOAT_REG6)
+		if (FAST_IS_REG(dst))
 			return emit_sse2_load(compiler, op & SLJIT_SINGLE_OP, dst, src, srcw);
-		if (src <= SLJIT_FLOAT_REG6)
+		if (FAST_IS_REG(src))
 			return emit_sse2_store(compiler, op & SLJIT_SINGLE_OP, dst, dstw, src);
 		FAIL_IF(emit_sse2_load(compiler, op & SLJIT_SINGLE_OP, TMP_FREG, src, srcw));
 		return emit_sse2_store(compiler, op & SLJIT_SINGLE_OP, dst, dstw, TMP_FREG);
 	}
 
-	if (dst >= SLJIT_FLOAT_REG1 && dst <= SLJIT_FLOAT_REG6) {
+	if (SLOW_IS_REG(dst)) {
 		dst_r = dst;
 		if (dst != src)
 			FAIL_IF(emit_sse2_load(compiler, op & SLJIT_SINGLE_OP, dst_r, src, srcw));
@@ -2386,7 +2396,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compile
 	compiler->mode32 = 1;
 #endif
 
-	if (dst <= SLJIT_FLOAT_REG6) {
+	if (FAST_IS_REG(dst)) {
 		dst_r = dst;
 		if (dst == src1)
 			; /* Do nothing here. */
@@ -2548,8 +2558,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 #if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
 		if (src == SLJIT_SCRATCH_REG3) {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src, 0);
-			src = TMP_REGISTER;
+			EMIT_MOV(compiler, TMP_REG1, 0, src, 0);
+			src = TMP_REG1;
 		}
 		if (src == SLJIT_MEM1(SLJIT_LOCALS_REG) && type >= SLJIT_CALL3)
 			srcw += sizeof(sljit_sw);
@@ -2557,8 +2567,8 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compil
 #endif
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && defined(_WIN64)
 		if (src == SLJIT_SCRATCH_REG3) {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, src, 0);
-			src = TMP_REGISTER;
+			EMIT_MOV(compiler, TMP_REG1, 0, src, 0);
+			src = TMP_REG1;
 		}
 #endif
 		FAIL_IF(call_with_args(compiler, type));
@@ -2626,22 +2636,22 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	cond_set = get_jump_code(type) + 0x10;
 
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-	if (GET_OPCODE(op) == SLJIT_OR && !GET_ALL_FLAGS(op) && dst <= TMP_REGISTER && dst == src) {
+	if (GET_OPCODE(op) == SLJIT_OR && !GET_ALL_FLAGS(op) && FAST_IS_REG(dst) && dst == src) {
 		inst = (sljit_ub*)ensure_buf(compiler, 1 + 4 + 3);
 		FAIL_IF(!inst);
 		INC_SIZE(4 + 3);
 		/* Set low register to conditional flag. */
-		*inst++ = (reg_map[TMP_REGISTER] <= 7) ? REX : REX_B;
+		*inst++ = (reg_map[TMP_REG1] <= 7) ? REX : REX_B;
 		*inst++ = GROUP_0F;
 		*inst++ = cond_set;
-		*inst++ = MOD_REG | reg_lmap[TMP_REGISTER];
-		*inst++ = REX | (reg_map[TMP_REGISTER] <= 7 ? 0 : REX_R) | (reg_map[dst] <= 7 ? 0 : REX_B);
+		*inst++ = MOD_REG | reg_lmap[TMP_REG1];
+		*inst++ = REX | (reg_map[TMP_REG1] <= 7 ? 0 : REX_R) | (reg_map[dst] <= 7 ? 0 : REX_B);
 		*inst++ = OR_rm8_r8;
-		*inst++ = MOD_REG | (reg_lmap[TMP_REGISTER] << 3) | reg_lmap[dst];
+		*inst++ = MOD_REG | (reg_lmap[TMP_REG1] << 3) | reg_lmap[dst];
 		return SLJIT_SUCCESS;
 	}
 
-	reg = (op == SLJIT_MOV && dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	reg = (op == SLJIT_MOV && FAST_IS_REG(dst)) ? dst : TMP_REG1;
 
 	inst = (sljit_ub*)ensure_buf(compiler, 1 + 4 + 4);
 	FAIL_IF(!inst);
@@ -2656,19 +2666,19 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	*inst++ = MOVZX_r_rm8;
 	*inst = MOD_REG | (reg_lmap[reg] << 3) | reg_lmap[reg];
 
-	if (reg != TMP_REGISTER)
+	if (reg != TMP_REG1)
 		return SLJIT_SUCCESS;
 
 	if (GET_OPCODE(op) < SLJIT_ADD) {
 		compiler->mode32 = GET_OPCODE(op) != SLJIT_MOV;
-		return emit_mov(compiler, dst, dstw, TMP_REGISTER, 0);
+		return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
 	}
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	compiler->skip_checks = 1;
 #endif
-	return sljit_emit_op2(compiler, op, dst, dstw, dst, dstw, TMP_REGISTER, 0);
+	return sljit_emit_op2(compiler, op, dst, dstw, dst, dstw, TMP_REG1, 0);
 #else /* SLJIT_CONFIG_X86_64 */
-	if (GET_OPCODE(op) < SLJIT_ADD && dst <= TMP_REGISTER) {
+	if (GET_OPCODE(op) < SLJIT_ADD && FAST_IS_REG(dst)) {
 		if (reg_map[dst] <= 4) {
 			/* Low byte is accessible. */
 			inst = (sljit_ub*)ensure_buf(compiler, 1 + 3 + 3);
@@ -2690,7 +2700,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 			get_cpu_features();
 
 		if (cpu_has_cmov) {
-			EMIT_MOV(compiler, TMP_REGISTER, 0, SLJIT_IMM, 1);
+			EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_IMM, 1);
 			/* a xor reg, reg operation would overwrite the flags. */
 			EMIT_MOV(compiler, dst, 0, SLJIT_IMM, 0);
 
@@ -2701,14 +2711,14 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 			*inst++ = GROUP_0F;
 			/* cmovcc = setcc - 0x50. */
 			*inst++ = cond_set - 0x50;
-			*inst++ = MOD_REG | (reg_map[dst] << 3) | reg_map[TMP_REGISTER];
+			*inst++ = MOD_REG | (reg_map[dst] << 3) | reg_map[TMP_REG1];
 			return SLJIT_SUCCESS;
 		}
 
 		inst = (sljit_ub*)ensure_buf(compiler, 1 + 1 + 3 + 3 + 1);
 		FAIL_IF(!inst);
 		INC_SIZE(1 + 3 + 3 + 1);
-		*inst++ = XCHG_EAX_r + reg_map[TMP_REGISTER];
+		*inst++ = XCHG_EAX_r + reg_map[TMP_REG1];
 		/* Set al to conditional flag. */
 		*inst++ = GROUP_0F;
 		*inst++ = cond_set;
@@ -2717,24 +2727,24 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 		*inst++ = GROUP_0F;
 		*inst++ = MOVZX_r_rm8;
 		*inst++ = MOD_REG | (reg_map[dst] << 3) | 0 /* eax */;
-		*inst++ = XCHG_EAX_r + reg_map[TMP_REGISTER];
+		*inst++ = XCHG_EAX_r + reg_map[TMP_REG1];
 		return SLJIT_SUCCESS;
 	}
 
-	if (GET_OPCODE(op) == SLJIT_OR && !GET_ALL_FLAGS(op) && dst <= TMP_REGISTER && dst == src && reg_map[dst] <= 4) {
+	if (GET_OPCODE(op) == SLJIT_OR && !GET_ALL_FLAGS(op) && FAST_IS_REG(dst) && dst == src && reg_map[dst] <= 4) {
 		SLJIT_COMPILE_ASSERT(reg_map[SLJIT_SCRATCH_REG1] == 0, scratch_reg1_must_be_eax);
 		if (dst != SLJIT_SCRATCH_REG1) {
 			inst = (sljit_ub*)ensure_buf(compiler, 1 + 1 + 3 + 2 + 1);
 			FAIL_IF(!inst);
 			INC_SIZE(1 + 3 + 2 + 1);
 			/* Set low register to conditional flag. */
-			*inst++ = XCHG_EAX_r + reg_map[TMP_REGISTER];
+			*inst++ = XCHG_EAX_r + reg_map[TMP_REG1];
 			*inst++ = GROUP_0F;
 			*inst++ = cond_set;
 			*inst++ = MOD_REG | 0 /* eax */;
 			*inst++ = OR_rm8_r8;
 			*inst++ = MOD_REG | (0 /* eax */ << 3) | reg_map[dst];
-			*inst++ = XCHG_EAX_r + reg_map[TMP_REGISTER];
+			*inst++ = XCHG_EAX_r + reg_map[TMP_REG1];
 		}
 		else {
 			inst = (sljit_ub*)ensure_buf(compiler, 1 + 2 + 3 + 2 + 2);
@@ -2742,23 +2752,23 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 			INC_SIZE(2 + 3 + 2 + 2);
 			/* Set low register to conditional flag. */
 			*inst++ = XCHG_r_rm;
-			*inst++ = MOD_REG | (1 /* ecx */ << 3) | reg_map[TMP_REGISTER];
+			*inst++ = MOD_REG | (1 /* ecx */ << 3) | reg_map[TMP_REG1];
 			*inst++ = GROUP_0F;
 			*inst++ = cond_set;
 			*inst++ = MOD_REG | 1 /* ecx */;
 			*inst++ = OR_rm8_r8;
 			*inst++ = MOD_REG | (1 /* ecx */ << 3) | 0 /* eax */;
 			*inst++ = XCHG_r_rm;
-			*inst++ = MOD_REG | (1 /* ecx */ << 3) | reg_map[TMP_REGISTER];
+			*inst++ = MOD_REG | (1 /* ecx */ << 3) | reg_map[TMP_REG1];
 		}
 		return SLJIT_SUCCESS;
 	}
 
-	/* Set TMP_REGISTER to the bit. */
+	/* Set TMP_REG1 to the bit. */
 	inst = (sljit_ub*)ensure_buf(compiler, 1 + 1 + 3 + 3 + 1);
 	FAIL_IF(!inst);
 	INC_SIZE(1 + 3 + 3 + 1);
-	*inst++ = XCHG_EAX_r + reg_map[TMP_REGISTER];
+	*inst++ = XCHG_EAX_r + reg_map[TMP_REG1];
 	/* Set al to conditional flag. */
 	*inst++ = GROUP_0F;
 	*inst++ = cond_set;
@@ -2768,15 +2778,15 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *com
 	*inst++ = MOVZX_r_rm8;
 	*inst++ = MOD_REG | (0 << 3) /* eax */ | 0 /* eax */;
 
-	*inst++ = XCHG_EAX_r + reg_map[TMP_REGISTER];
+	*inst++ = XCHG_EAX_r + reg_map[TMP_REG1];
 
 	if (GET_OPCODE(op) < SLJIT_ADD)
-		return emit_mov(compiler, dst, dstw, TMP_REGISTER, 0);
+		return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
 
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	compiler->skip_checks = 1;
 #endif
-	return sljit_emit_op2(compiler, op, dst_save, dstw_save, dst_save, dstw_save, TMP_REGISTER, 0);
+	return sljit_emit_op2(compiler, op, dst_save, dstw_save, dst_save, dstw_save, TMP_REG1, 0);
 #endif /* SLJIT_CONFIG_X86_64 */
 }
 
@@ -2796,12 +2806,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *co
 
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 	if (NOT_HALFWORD(offset)) {
-		FAIL_IF(emit_load_imm64(compiler, TMP_REGISTER, offset));
+		FAIL_IF(emit_load_imm64(compiler, TMP_REG1, offset));
 #if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-		SLJIT_ASSERT(emit_lea_binary(compiler, SLJIT_KEEP_FLAGS, dst, dstw, SLJIT_LOCALS_REG, 0, TMP_REGISTER, 0) != SLJIT_ERR_UNSUPPORTED);
+		SLJIT_ASSERT(emit_lea_binary(compiler, SLJIT_KEEP_FLAGS, dst, dstw, SLJIT_LOCALS_REG, 0, TMP_REG1, 0) != SLJIT_ERR_UNSUPPORTED);
 		return compiler->error;
 #else
-		return emit_lea_binary(compiler, SLJIT_KEEP_FLAGS, dst, dstw, SLJIT_LOCALS_REG, 0, TMP_REGISTER, 0);
+		return emit_lea_binary(compiler, SLJIT_KEEP_FLAGS, dst, dstw, SLJIT_LOCALS_REG, 0, TMP_REG1, 0);
 #endif
 	}
 #endif
@@ -2831,13 +2841,13 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 	compiler->mode32 = 0;
-	reg = (dst <= TMP_REGISTER) ? dst : TMP_REGISTER;
+	reg = SLOW_IS_REG(dst) ? dst : TMP_REG1;
 
 	if (emit_load_imm64(compiler, reg, init_value))
 		return NULL;
 #else
 	if (dst == SLJIT_UNUSED)
-		dst = TMP_REGISTER;
+		dst = TMP_REG1;
 
 	if (emit_mov(compiler, dst, dstw, SLJIT_IMM, init_value))
 		return NULL;
@@ -2850,8 +2860,8 @@ SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compi
 	*inst++ = 1;
 
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-	if (reg == TMP_REGISTER && dst != SLJIT_UNUSED)
-		if (emit_mov(compiler, dst, dstw, TMP_REGISTER, 0))
+	if (dst & SLJIT_MEM)
+		if (emit_mov(compiler, dst, dstw, TMP_REG1, 0))
 			return NULL;
 #endif
 
diff --git a/src/3rdparty/sha1/sha1.cpp b/src/3rdparty/sha1/sha1.cpp
index e02655f8bc..e111a7c88a 100644
--- a/src/3rdparty/sha1/sha1.cpp
+++ b/src/3rdparty/sha1/sha1.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/3rdparty/sqlite.pri b/src/3rdparty/sqlite.pri
index 0c9d179660..15f082b2ba 100644
--- a/src/3rdparty/sqlite.pri
+++ b/src/3rdparty/sqlite.pri
@@ -3,6 +3,7 @@ DEFINES += SQLITE_OMIT_LOAD_EXTENSION SQLITE_OMIT_COMPLETE SQLITE_ENABLE_FTS3 SQ
 !contains(CONFIG, largefile):DEFINES += SQLITE_DISABLE_LFS
 contains(QT_CONFIG, posix_fallocate):DEFINES += HAVE_POSIX_FALLOCATE=1
 winrt: DEFINES += SQLITE_OS_WINRT
+winphone: DEFINES += SQLITE_WIN32_FILEMAPPING_API=1
 qnx: DEFINES += _QNX_SOURCE
 INCLUDEPATH +=  $$PWD/sqlite
 SOURCES +=      $$PWD/sqlite/sqlite3.c
diff --git a/src/3rdparty/sqlite/shell.c b/src/3rdparty/sqlite/shell.c
index 2cff102e91..a74dcdb85d 100644
--- a/src/3rdparty/sqlite/shell.c
+++ b/src/3rdparty/sqlite/shell.c
@@ -64,6 +64,7 @@
 
 #if defined(_WIN32) || defined(WIN32)
 # include <io.h>
+# include <fcntl.h>
 #define isatty(h) _isatty(h)
 #ifndef access
 # define access(f,m) _access((f),(m))
@@ -446,8 +447,9 @@ struct previous_mode_data {
 struct callback_data {
   sqlite3 *db;           /* The database */
   int echoOn;            /* True to echo input commands */
-  int autoEQP;           /* Run EXPLAIN QUERY PLAN prior to seach SQL statement */
+  int autoEQP;           /* Run EXPLAIN QUERY PLAN prior to seach SQL stmt */
   int statsOn;           /* True to display memory stats before each finalize */
+  int outCount;          /* Revert to stdout when reaching zero */
   int cnt;               /* Number of records displayed so far */
   FILE *out;             /* Write results here */
   FILE *traceOut;        /* Output for sqlite3_trace() */
@@ -457,6 +459,7 @@ struct callback_data {
   int showHeader;        /* True to show column names in List or Column mode */
   char *zDestTable;      /* Name of destination table when MODE_Insert */
   char separator[20];    /* Separator character for MODE_List */
+  char newline[20];      /* Record separator in MODE_Csv */
   int colWidth[100];     /* Requested width of each column when in column mode*/
   int actualWidth[100];  /* Actual width of each column */
   char nullvalue[20];    /* The text to print when a NULL comes back from
@@ -658,7 +661,8 @@ static const char needCsvQuote[] = {
 /*
 ** Output a single term of CSV.  Actually, p->separator is used for
 ** the separator, which may or may not be a comma.  p->nullvalue is
-** the null value.  Strings are quoted if necessary.
+** the null value.  Strings are quoted if necessary.  The separator
+** is only issued if bSep is true.
 */
 static void output_csv(struct callback_data *p, const char *z, int bSep){
   FILE *out = p->out;
@@ -697,7 +701,8 @@ static void output_csv(struct callback_data *p, const char *z, int bSep){
 */
 static void interrupt_handler(int NotUsed){
   UNUSED_PARAMETER(NotUsed);
-  seenInterrupt = 1;
+  seenInterrupt++;
+  if( seenInterrupt>2 ) exit(1);
   if( db ) sqlite3_interrupt(db);
 }
 #endif
@@ -853,17 +858,26 @@ static int shell_callback(void *pArg, int nArg, char **azArg, char **azCol, int
       break;
     }
     case MODE_Csv: {
+#if defined(WIN32) || defined(_WIN32)
+      fflush(p->out);
+      _setmode(_fileno(p->out), _O_BINARY);
+#endif
       if( p->cnt++==0 && p->showHeader ){
         for(i=0; i<nArg; i++){
           output_csv(p, azCol[i] ? azCol[i] : "", i<nArg-1);
         }
-        fprintf(p->out,"\n");
+        fprintf(p->out,"%s",p->newline);
       }
-      if( azArg==0 ) break;
-      for(i=0; i<nArg; i++){
-        output_csv(p, azArg[i], i<nArg-1);
+      if( azArg>0 ){
+        for(i=0; i<nArg; i++){
+          output_csv(p, azArg[i], i<nArg-1);
+        }
+        fprintf(p->out,"%s",p->newline);
       }
-      fprintf(p->out,"\n");
+#if defined(WIN32) || defined(_WIN32)
+      fflush(p->out);
+      _setmode(_fileno(p->out), _O_TEXT);
+#endif
       break;
     }
     case MODE_Insert: {
@@ -877,7 +891,8 @@ static int shell_callback(void *pArg, int nArg, char **azArg, char **azCol, int
         }else if( aiType && aiType[i]==SQLITE_TEXT ){
           if( zSep[0] ) fprintf(p->out,"%s",zSep);
           output_quoted_string(p->out, azArg[i]);
-        }else if( aiType && (aiType[i]==SQLITE_INTEGER || aiType[i]==SQLITE_FLOAT) ){
+        }else if( aiType && (aiType[i]==SQLITE_INTEGER
+                             || aiType[i]==SQLITE_FLOAT) ){
           fprintf(p->out,"%s%s",zSep, azArg[i]);
         }else if( aiType && aiType[i]==SQLITE_BLOB && p->pStmt ){
           const void *pBlob = sqlite3_column_blob(p->pStmt, i);
@@ -1195,8 +1210,9 @@ static void explain_data_prepare(struct callback_data *p, sqlite3_stmt *pSql){
   int nAlloc = 0;                 /* Allocated size of p->aiIndent[], abYield */
   int iOp;                        /* Index of operation in p->aiIndent[] */
 
-  const char *azNext[] = { "Next", "Prev", "VPrev", "VNext", "SorterNext", 0 };
-  const char *azYield[] = { "Yield", "SeekLt", "SeekGt", "RowSetRead", "Rewind", 0 };
+  const char *azNext[] = { "Next", "Prev", "VPrev", "VNext", "SorterNext",
+                           "NextIfOpen", "PrevIfOpen", 0 };
+  const char *azYield[] = { "Yield", "SeekLT", "SeekGT", "RowSetRead", "Rewind", 0 };
   const char *azGoto[] = { "Goto", 0 };
 
   /* Try to figure out if this is really an EXPLAIN statement. If this
@@ -1568,17 +1584,19 @@ static int run_schema_dump_query(
 */
 static char zHelp[] =
   ".backup ?DB? FILE      Backup DB (default \"main\") to FILE\n"
-  ".bail ON|OFF           Stop after hitting an error.  Default OFF\n"
+  ".bail on|off           Stop after hitting an error.  Default OFF\n"
   ".clone NEWDB           Clone data into NEWDB from the existing database\n"
   ".databases             List names and files of attached databases\n"
   ".dump ?TABLE? ...      Dump the database in an SQL text format\n"
   "                         If TABLE specified, only dump tables matching\n"
   "                         LIKE pattern TABLE.\n"
-  ".echo ON|OFF           Turn command echo on or off\n"
+  ".echo on|off           Turn command echo on or off\n"
+  ".eqp on|off            Enable or disable automatic EXPLAIN QUERY PLAN\n"
   ".exit                  Exit this program\n"
-  ".explain ?ON|OFF?      Turn output mode suitable for EXPLAIN on or off.\n"
+  ".explain ?on|off?      Turn output mode suitable for EXPLAIN on or off.\n"
   "                         With no args, it turns EXPLAIN on.\n"
-  ".header(s) ON|OFF      Turn display of headers on or off\n"
+  ".fullschema            Show schema and the content of sqlite_stat tables\n"
+  ".headers on|off        Turn display of headers on or off\n"
   ".help                  Show this message\n"
   ".import FILE TABLE     Import data from FILE into TABLE\n"
   ".indices ?TABLE?       Show names of all indices\n"
@@ -1601,9 +1619,9 @@ static char zHelp[] =
   "                         tabs     Tab-separated values\n"
   "                         tcl      TCL list elements\n"
   ".nullvalue STRING      Use STRING in place of NULL values\n"
+  ".once FILENAME         Output for the next SQL command only to FILENAME\n"
   ".open ?FILENAME?       Close existing database and reopen FILENAME\n"
-  ".output FILENAME       Send output to FILENAME\n"
-  ".output stdout         Send output to the screen\n"
+  ".output ?FILENAME?     Send output to FILENAME or stdout\n"
   ".print STRING...       Print literal STRING\n"
   ".prompt MAIN CONTINUE  Replace the standard prompts\n"
   ".quit                  Exit this program\n"
@@ -1613,24 +1631,85 @@ static char zHelp[] =
   ".schema ?TABLE?        Show the CREATE statements\n"
   "                         If TABLE specified, only show tables matching\n"
   "                         LIKE pattern TABLE.\n"
-  ".separator STRING      Change separator used by output mode and .import\n"
+  ".separator STRING ?NL? Change separator used by output mode and .import\n"
+  "                         NL is the end-of-line mark for CSV\n"
+  ".shell CMD ARGS...     Run CMD ARGS... in a system shell\n"
   ".show                  Show the current values for various settings\n"
-  ".stats ON|OFF          Turn stats on or off\n"
+  ".stats on|off          Turn stats on or off\n"
+  ".system CMD ARGS...    Run CMD ARGS... in a system shell\n"
   ".tables ?TABLE?        List names of tables\n"
   "                         If TABLE specified, only list tables matching\n"
   "                         LIKE pattern TABLE.\n"
   ".timeout MS            Try opening locked tables for MS milliseconds\n"
+  ".timer on|off          Turn SQL timer on or off\n"
   ".trace FILE|off        Output each SQL statement as it is run\n"
   ".vfsname ?AUX?         Print the name of the VFS stack\n"
   ".width NUM1 NUM2 ...   Set column widths for \"column\" mode\n"
-;
-
-static char zTimerHelp[] =
-  ".timer ON|OFF          Turn the CPU timer measurement on or off\n"
+  "                         Negative values right-justify\n"
 ;
 
 /* Forward reference */
 static int process_input(struct callback_data *p, FILE *in);
+/*
+** Implementation of the "readfile(X)" SQL function.  The entire content
+** of the file named X is read and returned as a BLOB.  NULL is returned
+** if the file does not exist or is unreadable.
+*/
+static void readfileFunc(
+  sqlite3_context *context,
+  int argc,
+  sqlite3_value **argv
+){
+  const char *zName;
+  FILE *in;
+  long nIn;
+  void *pBuf;
+
+  zName = (const char*)sqlite3_value_text(argv[0]);
+  if( zName==0 ) return;
+  in = fopen(zName, "rb");
+  if( in==0 ) return;
+  fseek(in, 0, SEEK_END);
+  nIn = ftell(in);
+  rewind(in);
+  pBuf = sqlite3_malloc( nIn );
+  if( pBuf && 1==fread(pBuf, nIn, 1, in) ){
+    sqlite3_result_blob(context, pBuf, nIn, sqlite3_free);
+  }else{
+    sqlite3_free(pBuf);
+  }
+  fclose(in);
+}
+
+/*
+** Implementation of the "writefile(X,Y)" SQL function.  The argument Y
+** is written into file X.  The number of bytes written is returned.  Or
+** NULL is returned if something goes wrong, such as being unable to open
+** file X for writing.
+*/
+static void writefileFunc(
+  sqlite3_context *context,
+  int argc,
+  sqlite3_value **argv
+){
+  FILE *out;
+  const char *z;
+  sqlite3_int64 rc;
+  const char *zFile;
+
+  zFile = (const char*)sqlite3_value_text(argv[0]);
+  if( zFile==0 ) return;
+  out = fopen(zFile, "wb");
+  if( out==0 ) return;
+  z = (const char*)sqlite3_value_blob(argv[1]);
+  if( z==0 ){
+    rc = 0;
+  }else{
+    rc = fwrite(z, 1, sqlite3_value_bytes(argv[1]), out);
+  }
+  fclose(out);
+  sqlite3_result_int64(context, rc);
+}
 
 /*
 ** Make sure the database is open.  If it is not, then open it.  If
@@ -1654,6 +1733,10 @@ static void open_db(struct callback_data *p, int keepAlive){
 #ifndef SQLITE_OMIT_LOAD_EXTENSION
     sqlite3_enable_load_extension(p->db, 1);
 #endif
+    sqlite3_create_function(db, "readfile", 1, SQLITE_UTF8, 0,
+                            readfileFunc, 0, 0);
+    sqlite3_create_function(db, "writefile", 2, SQLITE_UTF8, 0,
+                            writefileFunc, 0, 0);
   }
 }
 
@@ -1670,6 +1753,7 @@ static void open_db(struct callback_data *p, int keepAlive){
 static void resolve_backslashes(char *z){
   int i, j;
   char c;
+  while( *z && *z!='\\' ) z++;
   for(i=j=0; (c = z[i])!=0; i++, j++){
     if( c=='\\' ){
       c = z[++i];
@@ -1695,7 +1779,7 @@ static void resolve_backslashes(char *z){
     }
     z[j] = c;
   }
-  z[j] = 0;
+  if( j<i ) z[j] = 0;
 }
 
 /*
@@ -2129,15 +2213,30 @@ static void tryToClone(struct callback_data *p, const char *zNewDb){
     fprintf(stderr, "Cannot create output database: %s\n",
             sqlite3_errmsg(newDb));
   }else{
+    sqlite3_exec(p->db, "PRAGMA writable_schema=ON;", 0, 0, 0);
     sqlite3_exec(newDb, "BEGIN EXCLUSIVE;", 0, 0, 0);
     tryToCloneSchema(p, newDb, "type='table'", tryToCloneData);
     tryToCloneSchema(p, newDb, "type!='table'", 0);
     sqlite3_exec(newDb, "COMMIT;", 0, 0, 0);
+    sqlite3_exec(p->db, "PRAGMA writable_schema=OFF;", 0, 0, 0);
   }
   sqlite3_close(newDb);
 }
 
 /*
+** Change the output file back to stdout
+*/
+static void output_reset(struct callback_data *p){
+  if( p->outfile[0]=='|' ){
+    pclose(p->out);
+  }else{
+    output_file_close(p->out);
+  }
+  p->outfile[0] = 0;
+  p->out = stdout;
+}
+
+/*
 ** If an input line begins with "." then invoke this routine to
 ** process that line.
 **
@@ -2235,8 +2334,13 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     sqlite3_close(pDest);
   }else
 
-  if( c=='b' && n>=3 && strncmp(azArg[0], "bail", n)==0 && nArg>1 && nArg<3 ){
-    bail_on_error = booleanValue(azArg[1]);
+  if( c=='b' && n>=3 && strncmp(azArg[0], "bail", n)==0 ){
+    if( nArg==2 ){
+      bail_on_error = booleanValue(azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .bail on|off\n");
+      rc = 1;
+    }
   }else
 
   /* The undocumented ".breakpoint" command causes a call to the no-op
@@ -2246,11 +2350,16 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     test_breakpoint();
   }else
 
-  if( c=='c' && strncmp(azArg[0], "clone", n)==0 && nArg>1 && nArg<3 ){
-    tryToClone(p, azArg[1]);
+  if( c=='c' && strncmp(azArg[0], "clone", n)==0 ){
+    if( nArg==2 ){
+      tryToClone(p, azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .clone FILENAME\n");
+      rc = 1;
+    }
   }else
 
-  if( c=='d' && n>1 && strncmp(azArg[0], "databases", n)==0 && nArg==1 ){
+  if( c=='d' && n>1 && strncmp(azArg[0], "databases", n)==0 ){
     struct callback_data data;
     char *zErrMsg = 0;
     open_db(p, 0);
@@ -2269,11 +2378,16 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='d' && strncmp(azArg[0], "dump", n)==0 && nArg<3 ){
+  if( c=='d' && strncmp(azArg[0], "dump", n)==0 ){
     open_db(p, 0);
     /* When playing back a "dump", the content might appear in an order
     ** which causes immediate foreign key constraints to be violated.
     ** So disable foreign-key constraint enforcement to prevent problems. */
+    if( nArg!=1 && nArg!=2 ){
+      fprintf(stderr, "Usage: .dump ?LIKE-PATTERN?\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
     fprintf(p->out, "PRAGMA foreign_keys=OFF;\n");
     fprintf(p->out, "BEGIN TRANSACTION;\n");
     p->writableSchema = 0;
@@ -2318,12 +2432,22 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     fprintf(p->out, p->nErr ? "ROLLBACK; -- due to errors\n" : "COMMIT;\n");
   }else
 
-  if( c=='e' && strncmp(azArg[0], "echo", n)==0 && nArg>1 && nArg<3 ){
-    p->echoOn = booleanValue(azArg[1]);
+  if( c=='e' && strncmp(azArg[0], "echo", n)==0 ){
+    if( nArg==2 ){
+      p->echoOn = booleanValue(azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .echo on|off\n");
+      rc = 1;
+    }
   }else
 
-  if( c=='e' && strncmp(azArg[0], "eqp", n)==0 && nArg>1 && nArg<3 ){
-    p->autoEQP = booleanValue(azArg[1]);
+  if( c=='e' && strncmp(azArg[0], "eqp", n)==0 ){
+    if( nArg==2 ){
+      p->autoEQP = booleanValue(azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .eqp on|off\n");
+      rc = 1;
+    }   
   }else
 
   if( c=='e' && strncmp(azArg[0], "exit", n)==0 ){
@@ -2331,7 +2455,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     rc = 2;
   }else
 
-  if( c=='e' && strncmp(azArg[0], "explain", n)==0 && nArg<3 ){
+  if( c=='e' && strncmp(azArg[0], "explain", n)==0 ){
     int val = nArg>=2 ? booleanValue(azArg[1]) : 1;
     if(val == 1) {
       if(!p->explainPrev.valid) {
@@ -2366,21 +2490,73 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='h' && (strncmp(azArg[0], "header", n)==0 ||
-                 strncmp(azArg[0], "headers", n)==0) && nArg>1 && nArg<3 ){
-    p->showHeader = booleanValue(azArg[1]);
+  if( c=='f' && strncmp(azArg[0], "fullschema", n)==0 ){
+    struct callback_data data;
+    char *zErrMsg = 0;
+    int doStats = 0;
+    if( nArg!=1 ){
+      fprintf(stderr, "Usage: .fullschema\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
+    open_db(p, 0);
+    memcpy(&data, p, sizeof(data));
+    data.showHeader = 0;
+    data.mode = MODE_Semi;
+    rc = sqlite3_exec(p->db,
+       "SELECT sql FROM"
+       "  (SELECT sql sql, type type, tbl_name tbl_name, name name, rowid x"
+       "     FROM sqlite_master UNION ALL"
+       "   SELECT sql, type, tbl_name, name, rowid FROM sqlite_temp_master) "
+       "WHERE type!='meta' AND sql NOTNULL AND name NOT LIKE 'sqlite_%'"
+       "ORDER BY rowid",
+       callback, &data, &zErrMsg
+    );
+    if( rc==SQLITE_OK ){
+      sqlite3_stmt *pStmt;
+      rc = sqlite3_prepare_v2(p->db,
+               "SELECT rowid FROM sqlite_master"
+               " WHERE name GLOB 'sqlite_stat[134]'",
+               -1, &pStmt, 0);
+      doStats = sqlite3_step(pStmt)==SQLITE_ROW;
+      sqlite3_finalize(pStmt);
+    }
+    if( doStats==0 ){
+      fprintf(p->out, "/* No STAT tables available */\n");
+    }else{
+      fprintf(p->out, "ANALYZE sqlite_master;\n");
+      sqlite3_exec(p->db, "SELECT 'ANALYZE sqlite_master'",
+                   callback, &data, &zErrMsg);
+      data.mode = MODE_Insert;
+      data.zDestTable = "sqlite_stat1";
+      shell_exec(p->db, "SELECT * FROM sqlite_stat1",
+                 shell_callback, &data,&zErrMsg);
+      data.zDestTable = "sqlite_stat3";
+      shell_exec(p->db, "SELECT * FROM sqlite_stat3",
+                 shell_callback, &data,&zErrMsg);
+      data.zDestTable = "sqlite_stat4";
+      shell_exec(p->db, "SELECT * FROM sqlite_stat4",
+                 shell_callback, &data, &zErrMsg);
+      fprintf(p->out, "ANALYZE sqlite_master;\n");
+    }
+  }else
+
+  if( c=='h' && strncmp(azArg[0], "headers", n)==0 ){
+    if( nArg==2 ){
+      p->showHeader = booleanValue(azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .headers on|off\n");
+      rc = 1;
+    }
   }else
 
   if( c=='h' && strncmp(azArg[0], "help", n)==0 ){
-    fprintf(stderr,"%s",zHelp);
-    if( HAS_TIMER ){
-      fprintf(stderr,"%s",zTimerHelp);
-    }
+    fprintf(p->out, "%s", zHelp);
   }else
 
-  if( c=='i' && strncmp(azArg[0], "import", n)==0 && nArg==3 ){
-    char *zTable = azArg[2];    /* Insert data into this table */
-    char *zFile = azArg[1];     /* Name of file to extra content from */
+  if( c=='i' && strncmp(azArg[0], "import", n)==0 ){
+    char *zTable;               /* Insert data into this table */
+    char *zFile;                /* Name of file to extra content from */
     sqlite3_stmt *pStmt = NULL; /* A statement */
     int nCol;                   /* Number of columns in the table */
     int nByte;                  /* Number of bytes in an SQL string */
@@ -2391,6 +2567,12 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     CSVReader sCsv;             /* Reader context */
     int (*xCloser)(FILE*);      /* Procedure to close th3 connection */
 
+    if( nArg!=3 ){
+      fprintf(stderr, "Usage: .import FILE TABLE\n");
+      goto meta_command_exit;
+    }
+    zFile = azArg[1];
+    zTable = azArg[2];
     seenInterrupt = 0;
     memset(&sCsv, 0, sizeof(sCsv));
     open_db(p, 0);
@@ -2427,6 +2609,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
     nByte = strlen30(zSql);
     rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
+    csv_append_char(&sCsv, 0);    /* To ensure sCsv.z is allocated */
     if( rc && sqlite3_strglob("no such table: *", sqlite3_errmsg(db))==0 ){
       char *zCreate = sqlite3_mprintf("CREATE TABLE %s", zTable);
       char cSep = '(';
@@ -2500,7 +2683,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
                           "filling the rest with NULL\n",
                           sCsv.zFile, startLine, nCol, i+1);
           i++;
-          while( i<nCol ){ sqlite3_bind_null(pStmt, i); i++; }
+          while( i<=nCol ){ sqlite3_bind_null(pStmt, i); i++; }
         }
       }
       if( sCsv.cTerm==sCsv.cSeparator ){
@@ -2528,7 +2711,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     if( needCommit ) sqlite3_exec(db, "COMMIT", 0, 0, 0);
   }else
 
-  if( c=='i' && strncmp(azArg[0], "indices", n)==0 && nArg<3 ){
+  if( c=='i' && strncmp(azArg[0], "indices", n)==0 ){
     struct callback_data data;
     char *zErrMsg = 0;
     open_db(p, 0);
@@ -2545,7 +2728,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
         "ORDER BY 1",
         callback, &data, &zErrMsg
       );
-    }else{
+    }else if( nArg==2 ){
       zShellStatic = azArg[1];
       rc = sqlite3_exec(p->db,
         "SELECT name FROM sqlite_master "
@@ -2557,6 +2740,10 @@ static int do_meta_command(char *zLine, struct callback_data *p){
         callback, &data, &zErrMsg
       );
       zShellStatic = 0;
+    }else{
+      fprintf(stderr, "Usage: .indices ?LIKE-PATTERN?\n");
+      rc = 1;
+      goto meta_command_exit;
     }
     if( zErrMsg ){
       fprintf(stderr,"Error: %s\n", zErrMsg);
@@ -2592,9 +2779,14 @@ static int do_meta_command(char *zLine, struct callback_data *p){
 #endif
 
 #ifndef SQLITE_OMIT_LOAD_EXTENSION
-  if( c=='l' && strncmp(azArg[0], "load", n)==0 && nArg>=2 ){
+  if( c=='l' && strncmp(azArg[0], "load", n)==0 ){
     const char *zFile, *zProc;
     char *zErrMsg = 0;
+    if( nArg<2 ){
+      fprintf(stderr, "Usage: .load FILE ?ENTRYPOINT?\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
     zFile = azArg[1];
     zProc = nArg>=3 ? azArg[2] : 0;
     open_db(p, 0);
@@ -2607,38 +2799,42 @@ static int do_meta_command(char *zLine, struct callback_data *p){
   }else
 #endif
 
-  if( c=='l' && strncmp(azArg[0], "log", n)==0 && nArg>=2 ){
-    const char *zFile = azArg[1];
-    output_file_close(p->pLog);
-    p->pLog = output_file_open(zFile);
+  if( c=='l' && strncmp(azArg[0], "log", n)==0 ){
+    if( nArg!=2 ){
+      fprintf(stderr, "Usage: .log FILENAME\n");
+      rc = 1;
+    }else{
+      const char *zFile = azArg[1];
+      output_file_close(p->pLog);
+      p->pLog = output_file_open(zFile);
+    }
   }else
 
-  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==2 ){
-    int n2 = strlen30(azArg[1]);
-    if( (n2==4 && strncmp(azArg[1],"line",n2)==0)
-        ||
-        (n2==5 && strncmp(azArg[1],"lines",n2)==0) ){
+  if( c=='m' && strncmp(azArg[0], "mode", n)==0 ){
+    const char *zMode = nArg>=2 ? azArg[1] : "";
+    int n2 = (int)strlen(zMode);
+    int c2 = zMode[0];
+    if( c2=='l' && n2>2 && strncmp(azArg[1],"lines",n2)==0 ){
       p->mode = MODE_Line;
-    }else if( (n2==6 && strncmp(azArg[1],"column",n2)==0)
-              ||
-              (n2==7 && strncmp(azArg[1],"columns",n2)==0) ){
+    }else if( c2=='c' && strncmp(azArg[1],"columns",n2)==0 ){
       p->mode = MODE_Column;
-    }else if( n2==4 && strncmp(azArg[1],"list",n2)==0 ){
+    }else if( c2=='l' && n2>2 && strncmp(azArg[1],"list",n2)==0 ){
       p->mode = MODE_List;
-    }else if( n2==4 && strncmp(azArg[1],"html",n2)==0 ){
+    }else if( c2=='h' && strncmp(azArg[1],"html",n2)==0 ){
       p->mode = MODE_Html;
-    }else if( n2==3 && strncmp(azArg[1],"tcl",n2)==0 ){
+    }else if( c2=='t' && strncmp(azArg[1],"tcl",n2)==0 ){
       p->mode = MODE_Tcl;
       sqlite3_snprintf(sizeof(p->separator), p->separator, " ");
-    }else if( n2==3 && strncmp(azArg[1],"csv",n2)==0 ){
+    }else if( c2=='c' && strncmp(azArg[1],"csv",n2)==0 ){
       p->mode = MODE_Csv;
       sqlite3_snprintf(sizeof(p->separator), p->separator, ",");
-    }else if( n2==4 && strncmp(azArg[1],"tabs",n2)==0 ){
+      sqlite3_snprintf(sizeof(p->newline), p->newline, "\r\n");
+    }else if( c2=='t' && strncmp(azArg[1],"tabs",n2)==0 ){
       p->mode = MODE_List;
       sqlite3_snprintf(sizeof(p->separator), p->separator, "\t");
-    }else if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){
+    }else if( c2=='i' && strncmp(azArg[1],"insert",n2)==0 ){
       p->mode = MODE_Insert;
-      set_table_name(p, "table");
+      set_table_name(p, nArg>=3 ? azArg[2] : "table");
     }else {
       fprintf(stderr,"Error: mode should be one of: "
          "column csv html insert line list tabs tcl\n");
@@ -2646,23 +2842,16 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==3 ){
-    int n2 = strlen30(azArg[1]);
-    if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){
-      p->mode = MODE_Insert;
-      set_table_name(p, azArg[2]);
-    }else {
-      fprintf(stderr, "Error: invalid arguments: "
-        " \"%s\". Enter \".help\" for help\n", azArg[2]);
+  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 ){
+    if( nArg==2 ){
+      sqlite3_snprintf(sizeof(p->nullvalue), p->nullvalue,
+                       "%.*s", (int)ArraySize(p->nullvalue)-1, azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .nullvalue STRING\n");
       rc = 1;
     }
   }else
 
-  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 && nArg==2 ) {
-    sqlite3_snprintf(sizeof(p->nullvalue), p->nullvalue,
-                     "%.*s", (int)ArraySize(p->nullvalue)-1, azArg[1]);
-  }else
-
   if( c=='o' && strncmp(azArg[0], "open", n)==0 && n>=2 ){
     sqlite3 *savedDb = p->db;
     const char *zSavedFilename = p->zDbFilename;
@@ -2683,32 +2872,45 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='o' && strncmp(azArg[0], "output", n)==0 && nArg==2 ){
-    if( p->outfile[0]=='|' ){
-      pclose(p->out);
+  if( c=='o'
+   && (strncmp(azArg[0], "output", n)==0 || strncmp(azArg[0], "once", n)==0)
+  ){
+    const char *zFile = nArg>=2 ? azArg[1] : "stdout";
+    if( nArg>2 ){
+      fprintf(stderr, "Usage: .%s FILE\n", azArg[0]);
+      rc = 1;
+      goto meta_command_exit;
+    }
+    if( n>1 && strncmp(azArg[0], "once", n)==0 ){
+      if( nArg<2 ){
+        fprintf(stderr, "Usage: .once FILE\n");
+        rc = 1;
+        goto meta_command_exit;
+      }
+      p->outCount = 2;
     }else{
-      output_file_close(p->out);
+      p->outCount = 0;
     }
-    p->outfile[0] = 0;
-    if( azArg[1][0]=='|' ){
-      p->out = popen(&azArg[1][1], "w");
+    output_reset(p);
+    if( zFile[0]=='|' ){
+      p->out = popen(zFile + 1, "w");
       if( p->out==0 ){
-        fprintf(stderr,"Error: cannot open pipe \"%s\"\n", &azArg[1][1]);
+        fprintf(stderr,"Error: cannot open pipe \"%s\"\n", zFile + 1);
         p->out = stdout;
         rc = 1;
       }else{
-        sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", azArg[1]);
+        sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", zFile);
       }
     }else{
-      p->out = output_file_open(azArg[1]);
+      p->out = output_file_open(zFile);
       if( p->out==0 ){
-        if( strcmp(azArg[1],"off")!=0 ){
-          fprintf(stderr,"Error: cannot write to \"%s\"\n", azArg[1]);
+        if( strcmp(zFile,"off")!=0 ){
+          fprintf(stderr,"Error: cannot write to \"%s\"\n", zFile);
         }
         p->out = stdout;
         rc = 1;
       } else {
-        sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", azArg[1]);
+        sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", zFile);
       }
     }
   }else
@@ -2722,7 +2924,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     fprintf(p->out, "\n");
   }else
 
-  if( c=='p' && strncmp(azArg[0], "prompt", n)==0 && (nArg==2 || nArg==3)){
+  if( c=='p' && strncmp(azArg[0], "prompt", n)==0 ){
     if( nArg >= 2) {
       strncpy(mainPrompt,azArg[1],(int)ArraySize(mainPrompt)-1);
     }
@@ -2731,12 +2933,18 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='q' && strncmp(azArg[0], "quit", n)==0 && nArg==1 ){
+  if( c=='q' && strncmp(azArg[0], "quit", n)==0 ){
     rc = 2;
   }else
 
-  if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 && nArg==2 ){
-    FILE *alt = fopen(azArg[1], "rb");
+  if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 ){
+    FILE *alt;
+    if( nArg!=2 ){
+      fprintf(stderr, "Usage: .read FILE\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
+    alt = fopen(azArg[1], "rb");
     if( alt==0 ){
       fprintf(stderr,"Error: cannot open \"%s\"\n", azArg[1]);
       rc = 1;
@@ -2746,7 +2954,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 && nArg>1 && nArg<4){
+  if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 ){
     const char *zSrcFile;
     const char *zDb;
     sqlite3 *pSrc;
@@ -2756,9 +2964,13 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     if( nArg==2 ){
       zSrcFile = azArg[1];
       zDb = "main";
-    }else{
+    }else if( nArg==3 ){
       zSrcFile = azArg[2];
       zDb = azArg[1];
+    }else{
+      fprintf(stderr, "Usage: .restore ?DB? FILE\n");
+      rc = 1;
+      goto meta_command_exit;
     }
     rc = sqlite3_open(zSrcFile, &pSrc);
     if( rc!=SQLITE_OK ){
@@ -2793,14 +3005,14 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     sqlite3_close(pSrc);
   }else
 
-  if( c=='s' && strncmp(azArg[0], "schema", n)==0 && nArg<3 ){
+  if( c=='s' && strncmp(azArg[0], "schema", n)==0 ){
     struct callback_data data;
     char *zErrMsg = 0;
     open_db(p, 0);
     memcpy(&data, p, sizeof(data));
     data.showHeader = 0;
     data.mode = MODE_Semi;
-    if( nArg>1 ){
+    if( nArg==2 ){
       int i;
       for(i=0; azArg[1][i]; i++) azArg[1][i] = ToLower(azArg[1][i]);
       if( strcmp(azArg[1],"sqlite_master")==0 ){
@@ -2844,7 +3056,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
           callback, &data, &zErrMsg);
         zShellStatic = 0;
       }
-    }else{
+    }else if( nArg==1 ){
       rc = sqlite3_exec(p->db,
          "SELECT sql FROM "
          "  (SELECT sql sql, type type, tbl_name tbl_name, name name, rowid x"
@@ -2854,6 +3066,10 @@ static int do_meta_command(char *zLine, struct callback_data *p){
          "ORDER BY rowid",
          callback, &data, &zErrMsg
       );
+    }else{
+      fprintf(stderr, "Usage: .schema ?LIKE-PATTERN?\n");
+      rc = 1;
+      goto meta_command_exit;
     }
     if( zErrMsg ){
       fprintf(stderr,"Error: %s\n", zErrMsg);
@@ -2883,20 +3099,53 @@ static int do_meta_command(char *zLine, struct callback_data *p){
       for(i=1; i<nArg; i++){
         char zBuf[200];
         v = integerValue(azArg[i]);
-        sqlite3_snprintf(sizeof(zBuf), zBuf, "%s: %lld 0x%llx\n", azArg[i], v, v);
+        sqlite3_snprintf(sizeof(zBuf),zBuf,"%s: %lld 0x%llx\n", azArg[i],v,v);
         fprintf(p->out, "%s", zBuf);
       }
     }
   }else
 #endif
 
-  if( c=='s' && strncmp(azArg[0], "separator", n)==0 && nArg==2 ){
-    sqlite3_snprintf(sizeof(p->separator), p->separator,
-                     "%.*s", (int)sizeof(p->separator)-1, azArg[1]);
+  if( c=='s' && strncmp(azArg[0], "separator", n)==0 ){
+    if( nArg<2 || nArg>3 ){
+      fprintf(stderr, "Usage: .separator SEPARATOR ?NEWLINE?\n");
+      rc = 1;
+    }
+    if( nArg>=2 ){
+      sqlite3_snprintf(sizeof(p->separator), p->separator, azArg[1]);
+    }
+    if( nArg>=3 ){
+      sqlite3_snprintf(sizeof(p->newline), p->newline, azArg[2]);
+    }
+  }else
+
+  if( c=='s'
+   && (strncmp(azArg[0], "shell", n)==0 || strncmp(azArg[0],"system",n)==0)
+  ){
+    char *zCmd;
+    int i, x;
+    if( nArg<2 ){
+      fprintf(stderr, "Usage: .system COMMAND\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
+    zCmd = sqlite3_mprintf(strchr(azArg[1],' ')==0?"%s":"\"%s\"", azArg[1]);
+    for(i=2; i<nArg; i++){
+      zCmd = sqlite3_mprintf(strchr(azArg[i],' ')==0?"%z %s":"%z \"%s\"",
+                             zCmd, azArg[i]);
+    }
+    x = system(zCmd);
+    sqlite3_free(zCmd);
+    if( x ) fprintf(stderr, "System command returns %d\n", x);
   }else
 
-  if( c=='s' && strncmp(azArg[0], "show", n)==0 && nArg==1 ){
+  if( c=='s' && strncmp(azArg[0], "show", n)==0 ){
     int i;
+    if( nArg!=1 ){
+      fprintf(stderr, "Usage: .show\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
     fprintf(p->out,"%9.9s: %s\n","echo", p->echoOn ? "on" : "off");
     fprintf(p->out,"%9.9s: %s\n","eqp", p->autoEQP ? "on" : "off");
     fprintf(p->out,"%9.9s: %s\n","explain", p->explainPrev.valid ? "on" :"off");
@@ -2909,6 +3158,8 @@ static int do_meta_command(char *zLine, struct callback_data *p){
             strlen30(p->outfile) ? p->outfile : "stdout");
     fprintf(p->out,"%9.9s: ", "separator");
       output_c_string(p->out, p->separator);
+      fprintf(p->out," ");
+      output_c_string(p->out, p->newline);
       fprintf(p->out, "\n");
     fprintf(p->out,"%9.9s: %s\n","stats", p->statsOn ? "on" : "off");
     fprintf(p->out,"%9.9s: ","width");
@@ -2918,11 +3169,16 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     fprintf(p->out,"\n");
   }else
 
-  if( c=='s' && strncmp(azArg[0], "stats", n)==0 && nArg>1 && nArg<3 ){
-    p->statsOn = booleanValue(azArg[1]);
+  if( c=='s' && strncmp(azArg[0], "stats", n)==0 ){
+    if( nArg==2 ){
+      p->statsOn = booleanValue(azArg[1]);
+    }else{
+      fprintf(stderr, "Usage: .stats on|off\n");
+      rc = 1;
+    }
   }else
 
-  if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 && nArg<3 ){
+  if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 ){
     sqlite3_stmt *pStmt;
     char **azResult;
     int nRow, nAlloc;
@@ -3024,6 +3280,7 @@ static int do_meta_command(char *zLine, struct callback_data *p){
       { "optimizations",         SQLITE_TESTCTRL_OPTIMIZATIONS          },
       { "iskeyword",             SQLITE_TESTCTRL_ISKEYWORD              },
       { "scratchmalloc",         SQLITE_TESTCTRL_SCRATCHMALLOC          },
+      { "byteorder",             SQLITE_TESTCTRL_BYTEORDER              },
     };
     int testctrl = -1;
     int rc = 0;
@@ -3064,9 +3321,10 @@ static int do_meta_command(char *zLine, struct callback_data *p){
           break;
 
         /* sqlite3_test_control(int) */
-        case SQLITE_TESTCTRL_PRNG_SAVE:           
-        case SQLITE_TESTCTRL_PRNG_RESTORE:        
+        case SQLITE_TESTCTRL_PRNG_SAVE:
+        case SQLITE_TESTCTRL_PRNG_RESTORE:
         case SQLITE_TESTCTRL_PRNG_RESET:
+        case SQLITE_TESTCTRL_BYTEORDER:
           if( nArg==2 ){
             rc = sqlite3_test_control(testctrl);
             fprintf(p->out, "%d (0x%08x)\n", rc, rc);
@@ -3126,20 +3384,32 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     }
   }else
 
-  if( c=='t' && n>4 && strncmp(azArg[0], "timeout", n)==0 && nArg==2 ){
+  if( c=='t' && n>4 && strncmp(azArg[0], "timeout", n)==0 ){
     open_db(p, 0);
-    sqlite3_busy_timeout(p->db, (int)integerValue(azArg[1]));
+    sqlite3_busy_timeout(p->db, nArg>=2 ? (int)integerValue(azArg[1]) : 0);
   }else
     
-  if( HAS_TIMER && c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0
-   && nArg==2
-  ){
-    enableTimer = booleanValue(azArg[1]);
+  if( c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0 ){
+    if( nArg==2 ){
+      enableTimer = booleanValue(azArg[1]);
+      if( enableTimer && !HAS_TIMER ){
+        fprintf(stderr, "Error: timer not available on this system.\n");
+        enableTimer = 0;
+      }
+    }else{
+      fprintf(stderr, "Usage: .timer on|off\n");
+      rc = 1;
+    }
   }else
   
-  if( c=='t' && strncmp(azArg[0], "trace", n)==0 && nArg>1 ){
+  if( c=='t' && strncmp(azArg[0], "trace", n)==0 ){
     open_db(p, 0);
     output_file_close(p->traceOut);
+    if( nArg!=2 ){
+      fprintf(stderr, "Usage: .trace FILE|off\n");
+      rc = 1;
+      goto meta_command_exit;
+    }
     p->traceOut = output_file_open(azArg[1]);
 #if !defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_OMIT_FLOATING_POINT)
     if( p->traceOut==0 ){
@@ -3170,11 +3440,11 @@ static int do_meta_command(char *zLine, struct callback_data *p){
 #if defined(SQLITE_DEBUG) && defined(SQLITE_ENABLE_WHERETRACE)
   if( c=='w' && strncmp(azArg[0], "wheretrace", n)==0 ){
     extern int sqlite3WhereTrace;
-    sqlite3WhereTrace = booleanValue(azArg[1]);
+    sqlite3WhereTrace = nArg>=2 ? booleanValue(azArg[1]) : 0xff;
   }else
 #endif
 
-  if( c=='w' && strncmp(azArg[0], "width", n)==0 && nArg>1 ){
+  if( c=='w' && strncmp(azArg[0], "width", n)==0 ){
     int j;
     assert( nArg<=ArraySize(azArg) );
     for(j=1; j<nArg && j<ArraySize(p->colWidth); j++){
@@ -3188,6 +3458,11 @@ static int do_meta_command(char *zLine, struct callback_data *p){
     rc = 1;
   }
 
+meta_command_exit:
+  if( p->outCount ){
+    p->outCount--;
+    if( p->outCount==0 ) output_reset(p);
+  }
   return rc;
 }
 
@@ -3355,6 +3630,10 @@ static int process_input(struct callback_data *p, FILE *in){
         errCnt++;
       }
       nSql = 0;
+      if( p->outCount ){
+        output_reset(p);
+        p->outCount = 0;
+      }
     }else if( nSql && _all_whitespace(zSql) ){
       if( p->echoOn ) printf("%s\n", zSql);
       nSql = 0;
@@ -3497,6 +3776,7 @@ static const char zOptions[] =
 #ifdef SQLITE_ENABLE_MULTIPLEX
   "   -multiplex           enable the multiplexor VFS\n"
 #endif
+  "   -newline SEP         set newline character(s) for CSV\n"
   "   -nullvalue TEXT      set text string for NULL values. Default ''\n"
   "   -separator SEP       set output field separator. Default: '|'\n"
   "   -stats               print memory stats before each finalize\n"
@@ -3526,6 +3806,7 @@ static void main_init(struct callback_data *data) {
   memset(data, 0, sizeof(*data));
   data->mode = MODE_List;
   memcpy(data->separator,"|", 2);
+  memcpy(data->newline,"\r\n", 3);
   data->showHeader = 0;
   sqlite3_config(SQLITE_CONFIG_URI, 1);
   sqlite3_config(SQLITE_CONFIG_LOG, shellLog, data);
@@ -3618,6 +3899,7 @@ int main(int argc, char **argv){
     if( z[1]=='-' ) z++;
     if( strcmp(z,"-separator")==0
      || strcmp(z,"-nullvalue")==0
+     || strcmp(z,"-newline")==0
      || strcmp(z,"-cmd")==0
     ){
       (void)cmdline_option_value(argc, argv, ++i);
@@ -3727,6 +4009,9 @@ int main(int argc, char **argv){
     }else if( strcmp(z,"-separator")==0 ){
       sqlite3_snprintf(sizeof(data.separator), data.separator,
                        "%s",cmdline_option_value(argc,argv,++i));
+    }else if( strcmp(z,"-newline")==0 ){
+      sqlite3_snprintf(sizeof(data.newline), data.newline,
+                       "%s",cmdline_option_value(argc,argv,++i));
     }else if( strcmp(z,"-nullvalue")==0 ){
       sqlite3_snprintf(sizeof(data.nullvalue), data.nullvalue,
                        "%s",cmdline_option_value(argc,argv,++i));
diff --git a/src/3rdparty/sqlite/sqlite3.c b/src/3rdparty/sqlite/sqlite3.c
index 27b5beac12..28cfcac389 100644
--- a/src/3rdparty/sqlite/sqlite3.c
+++ b/src/3rdparty/sqlite/sqlite3.c
@@ -1,6 +1,6 @@
 /******************************************************************************
 ** This file is an amalgamation of many separate C source files from SQLite
-** version 3.8.4.3.  By combining all the individual C code files into this 
+** version 3.8.6.  By combining all the individual C code files into this 
 ** single large file, the entire code can be compiled as a single translation
 ** unit.  This allows many compilers to do optimizations that would not be
 ** possible if the files were compiled separately.  Performance improvements
@@ -222,9 +222,9 @@ extern "C" {
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.8.4.3"
-#define SQLITE_VERSION_NUMBER 3008004
-#define SQLITE_SOURCE_ID      "2014-04-03 16:53:12 a611fa96c4a848614efe899130359c9f6fb889c3"
+#define SQLITE_VERSION        "3.8.6"
+#define SQLITE_VERSION_NUMBER 3008006
+#define SQLITE_SOURCE_ID      "2014-08-15 11:46:33 9491ba7d738528f168657adb43a198238abde19e"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -384,7 +384,7 @@ typedef sqlite_uint64 sqlite3_uint64;
 **
 ** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
 ** for the [sqlite3] object.
-** ^Calls to sqlite3_close() and sqlite3_close_v2() return SQLITE_OK if
+** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
 ** the [sqlite3] object is successfully destroyed and all associated
 ** resources are deallocated.
 **
@@ -392,7 +392,7 @@ typedef sqlite_uint64 sqlite3_uint64;
 ** statements or unfinished sqlite3_backup objects then sqlite3_close()
 ** will leave the database connection open and return [SQLITE_BUSY].
 ** ^If sqlite3_close_v2() is called with unfinalized prepared statements
-** and unfinished sqlite3_backups, then the database connection becomes
+** and/or unfinished sqlite3_backups, then the database connection becomes
 ** an unusable "zombie" which will automatically be deallocated when the
 ** last prepared statement is finalized or the last sqlite3_backup is
 ** finished.  The sqlite3_close_v2() interface is intended for use with
@@ -405,7 +405,7 @@ typedef sqlite_uint64 sqlite3_uint64;
 ** with the [sqlite3] object prior to attempting to close the object.  ^If
 ** sqlite3_close_v2() is called on a [database connection] that still has
 ** outstanding [prepared statements], [BLOB handles], and/or
-** [sqlite3_backup] objects then it returns SQLITE_OK but the deallocation
+** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
 ** of resources is deferred until all [prepared statements], [BLOB handles],
 ** and [sqlite3_backup] objects are also destroyed.
 **
@@ -501,16 +501,14 @@ SQLITE_API int sqlite3_exec(
 
 /*
 ** CAPI3REF: Result Codes
-** KEYWORDS: SQLITE_OK {error code} {error codes}
-** KEYWORDS: {result code} {result codes}
+** KEYWORDS: {result code definitions}
 **
 ** Many SQLite functions return an integer result code from the set shown
 ** here in order to indicate success or failure.
 **
 ** New error codes may be added in future versions of SQLite.
 **
-** See also: [SQLITE_IOERR_READ | extended result codes],
-** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK | result codes].
+** See also: [extended result code definitions]
 */
 #define SQLITE_OK           0   /* Successful result */
 /* beginning-of-error-codes */
@@ -548,26 +546,19 @@ SQLITE_API int sqlite3_exec(
 
 /*
 ** CAPI3REF: Extended Result Codes
-** KEYWORDS: {extended error code} {extended error codes}
-** KEYWORDS: {extended result code} {extended result codes}
+** KEYWORDS: {extended result code definitions}
 **
-** In its default configuration, SQLite API routines return one of 26 integer
-** [SQLITE_OK | result codes].  However, experience has shown that many of
+** In its default configuration, SQLite API routines return one of 30 integer
+** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
 ** address this, newer versions of SQLite (version 3.3.8 and later) include
 ** support for additional result codes that provide more detailed information
-** about errors. The extended result codes are enabled or disabled
+** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
-** [sqlite3_extended_result_codes()] API.
-**
-** Some of the available extended result codes are listed here.
-** One may expect the number of extended result codes will increase
-** over time.  Software that uses extended result codes should expect
-** to see new result codes in future releases of SQLite.
-**
-** The SQLITE_OK result code will never be extended.  It will always
-** be exactly zero.
+** [sqlite3_extended_result_codes()] API.  Or, the extended code for
+** the most recent error can be obtained using
+** [sqlite3_extended_errcode()].
 */
 #define SQLITE_IOERR_READ              (SQLITE_IOERR | (1<<8))
 #define SQLITE_IOERR_SHORT_READ        (SQLITE_IOERR | (2<<8))
@@ -675,7 +666,10 @@ SQLITE_API int sqlite3_exec(
 ** file that were written at the application level might have changed
 ** and that adjacent bytes, even bytes within the same sector are
 ** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
-** flag indicate that a file cannot be deleted when open.
+** flag indicate that a file cannot be deleted when open.  The
+** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
+** read-only media and cannot be changed even by processes with
+** elevated privileges.
 */
 #define SQLITE_IOCAP_ATOMIC                 0x00000001
 #define SQLITE_IOCAP_ATOMIC512              0x00000002
@@ -690,6 +684,7 @@ SQLITE_API int sqlite3_exec(
 #define SQLITE_IOCAP_SEQUENTIAL             0x00000400
 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
+#define SQLITE_IOCAP_IMMUTABLE              0x00002000
 
 /*
 ** CAPI3REF: File Locking Levels
@@ -796,7 +791,7 @@ struct sqlite3_file {
 ** locking strategy (for example to use dot-file locks), to inquire
 ** about the status of a lock, or to break stale locks.  The SQLite
 ** core reserves all opcodes less than 100 for its own use.
-** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
+** A [file control opcodes | list of opcodes] less than 100 is available.
 ** Applications that define a custom xFileControl method should use opcodes
 ** greater than 100 to avoid conflicts.  VFS implementations should
 ** return [SQLITE_NOTFOUND] for file control opcodes that they do not
@@ -869,6 +864,7 @@ struct sqlite3_io_methods {
 
 /*
 ** CAPI3REF: Standard File Control Opcodes
+** KEYWORDS: {file control opcodes} {file control opcode}
 **
 ** These integer constants are opcodes for the xFileControl method
 ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
@@ -1058,6 +1054,12 @@ struct sqlite3_io_methods {
 ** on whether or not the file has been renamed, moved, or deleted since it
 ** was first opened.
 **
+** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging.  This
+** opcode causes the xFileControl method to swap the file handle with the one
+** pointed to by the pArg argument.  This capability is used during testing
+** and only needs to be supported when SQLITE_TEST is defined.
+**
 ** </ul>
 */
 #define SQLITE_FCNTL_LOCKSTATE               1
@@ -1081,6 +1083,7 @@ struct sqlite3_io_methods {
 #define SQLITE_FCNTL_HAS_MOVED              20
 #define SQLITE_FCNTL_SYNC                   21
 #define SQLITE_FCNTL_COMMIT_PHASETWO        22
+#define SQLITE_FCNTL_WIN32_SET_HANDLE       23
 
 /*
 ** CAPI3REF: Mutex Handle
@@ -2141,27 +2144,33 @@ SQLITE_API int sqlite3_complete16(const void *sql);
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
 **
-** ^This routine sets a callback function that might be invoked whenever
-** an attempt is made to open a database table that another thread
-** or process has locked.
+** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
+** that might be invoked with argument P whenever
+** an attempt is made to access a database table associated with
+** [database connection] D when another thread
+** or process has the table locked.
+** The sqlite3_busy_handler() interface is used to implement
+** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
 **
-** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
+** ^If the busy callback is NULL, then [SQLITE_BUSY]
 ** is returned immediately upon encountering the lock.  ^If the busy callback
 ** is not NULL, then the callback might be invoked with two arguments.
 **
 ** ^The first argument to the busy handler is a copy of the void* pointer which
 ** is the third argument to sqlite3_busy_handler().  ^The second argument to
 ** the busy handler callback is the number of times that the busy handler has
-** been invoked for this locking event.  ^If the
+** been invoked for the same locking event.  ^If the
 ** busy callback returns 0, then no additional attempts are made to
-** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
+** access the database and [SQLITE_BUSY] is returned
+** to the application.
 ** ^If the callback returns non-zero, then another attempt
-** is made to open the database for reading and the cycle repeats.
+** is made to access the database and the cycle repeats.
 **
 ** The presence of a busy handler does not guarantee that it will be invoked
 ** when there is lock contention. ^If SQLite determines that invoking the busy
 ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
+** to the application instead of invoking the 
+** busy handler.
 ** Consider a scenario where one process is holding a read lock that
 ** it is trying to promote to a reserved lock and
 ** a second process is holding a reserved lock that it is trying
@@ -2175,28 +2184,15 @@ SQLITE_API int sqlite3_complete16(const void *sql);
 **
 ** ^The default busy callback is NULL.
 **
-** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
-** when SQLite is in the middle of a large transaction where all the
-** changes will not fit into the in-memory cache.  SQLite will
-** already hold a RESERVED lock on the database file, but it needs
-** to promote this lock to EXCLUSIVE so that it can spill cache
-** pages into the database file without harm to concurrent
-** readers.  ^If it is unable to promote the lock, then the in-memory
-** cache will be left in an inconsistent state and so the error
-** code is promoted from the relatively benign [SQLITE_BUSY] to
-** the more severe [SQLITE_IOERR_BLOCKED].  ^This error code promotion
-** forces an automatic rollback of the changes.  See the
-** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
-** CorruptionFollowingBusyError</a> wiki page for a discussion of why
-** this is important.
-**
 ** ^(There can only be a single busy handler defined for each
 ** [database connection].  Setting a new busy handler clears any
 ** previously set handler.)^  ^Note that calling [sqlite3_busy_timeout()]
-** will also set or clear the busy handler.
+** or evaluating [PRAGMA busy_timeout=N] will change the
+** busy handler and thus clear any previously set busy handler.
 **
 ** The busy callback should not take any actions which modify the
-** database connection that invoked the busy handler.  Any such actions
+** database connection that invoked the busy handler.  In other words,
+** the busy handler is not reentrant.  Any such actions
 ** result in undefined behavior.
 ** 
 ** A busy handler must not close the database connection
@@ -2212,7 +2208,7 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
 ** will sleep multiple times until at least "ms" milliseconds of sleeping
 ** have accumulated.  ^After at least "ms" milliseconds of sleeping,
 ** the handler returns 0 which causes [sqlite3_step()] to return
-** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
+** [SQLITE_BUSY].
 **
 ** ^Calling this routine with an argument less than or equal to zero
 ** turns off all busy handlers.
@@ -2221,6 +2217,8 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
 ** [database connection] any any given moment.  If another busy handler
 ** was defined  (using [sqlite3_busy_handler()]) prior to calling
 ** this routine, that other busy handler is cleared.)^
+**
+** See also:  [PRAGMA busy_timeout]
 */
 SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
@@ -2622,8 +2620,8 @@ SQLITE_API int sqlite3_set_authorizer(
 ** [sqlite3_set_authorizer | authorizer documentation] for additional
 ** information.
 **
-** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK | return code]
-** from the [sqlite3_vtab_on_conflict()] interface.
+** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
+** returned from the [sqlite3_vtab_on_conflict()] interface.
 */
 #define SQLITE_DENY   1   /* Abort the SQL statement with an error */
 #define SQLITE_IGNORE 2   /* Don't allow access, but don't generate an error */
@@ -2894,6 +2892,30 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 **     ^If sqlite3_open_v2() is used and the "cache" parameter is present in
 **     a URI filename, its value overrides any behavior requested by setting
 **     SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
+**
+**  <li> <b>psow</b>: ^The psow parameter may be "true" (or "on" or "yes" or
+**     "1") or "false" (or "off" or "no" or "0") to indicate that the
+**     [powersafe overwrite] property does or does not apply to the
+**     storage media on which the database file resides.  ^The psow query
+**     parameter only works for the built-in unix and Windows VFSes.
+**
+**  <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter
+**     which if set disables file locking in rollback journal modes.  This
+**     is useful for accessing a database on a filesystem that does not
+**     support locking.  Caution:  Database corruption might result if two
+**     or more processes write to the same database and any one of those
+**     processes uses nolock=1.
+**
+**  <li> <b>immutable</b>: ^The immutable parameter is a boolean query
+**     parameter that indicates that the database file is stored on
+**     read-only media.  ^When immutable is set, SQLite assumes that the
+**     database file cannot be changed, even by a process with higher
+**     privilege, and so the database is opened read-only and all locking
+**     and change detection is disabled.  Caution: Setting the immutable
+**     property on a database file that does in fact change can result
+**     in incorrect query results and/or [SQLITE_CORRUPT] errors.
+**     See also: [SQLITE_IOCAP_IMMUTABLE].
+**       
 ** </ul>
 **
 ** ^Specifying an unknown parameter in the query component of a URI is not an
@@ -2923,8 +2945,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 **          Open file "data.db" in the current directory for read-only access.
 **          Regardless of whether or not shared-cache mode is enabled by
 **          default, use a private cache.
-** <tr><td> file:/home/fred/data.db?vfs=unix-nolock <td>
-**          Open file "/home/fred/data.db". Use the special VFS "unix-nolock".
+** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
+**          Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
+**          that uses dot-files in place of posix advisory locking.
 ** <tr><td> file:data.db?mode=readonly <td> 
 **          An error. "readonly" is not a valid option for the "mode" parameter.
 ** </table>
@@ -4785,6 +4808,13 @@ SQLITE_API int sqlite3_sleep(int);
 ** is a NULL pointer, then SQLite performs a search for an appropriate
 ** temporary file directory.
 **
+** Applications are strongly discouraged from using this global variable.
+** It is required to set a temporary folder on Windows Runtime (WinRT).
+** But for all other platforms, it is highly recommended that applications
+** neither read nor write this variable.  This global variable is a relic
+** that exists for backwards compatibility of legacy applications and should
+** be avoided in new projects.
+**
 ** It is not safe to read or modify this variable in more than one
 ** thread at a time.  It is not safe to read or modify this variable
 ** if a [database connection] is being used at the same time in a separate
@@ -4803,6 +4833,11 @@ SQLITE_API int sqlite3_sleep(int);
 ** Hence, if this variable is modified directly, either it should be
 ** made NULL or made to point to memory obtained from [sqlite3_malloc]
 ** or else the use of the [temp_store_directory pragma] should be avoided.
+** Except when requested by the [temp_store_directory pragma], SQLite
+** does not free the memory that sqlite3_temp_directory points to.  If
+** the application wants that memory to be freed, it must do
+** so itself, taking care to only do so after all [database connection]
+** objects have been destroyed.
 **
 ** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
 ** prior to calling [sqlite3_open] or [sqlite3_open_v2].  Otherwise, various
@@ -5937,10 +5972,12 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
 ** <li>  SQLITE_MUTEX_RECURSIVE
 ** <li>  SQLITE_MUTEX_STATIC_MASTER
 ** <li>  SQLITE_MUTEX_STATIC_MEM
-** <li>  SQLITE_MUTEX_STATIC_MEM2
+** <li>  SQLITE_MUTEX_STATIC_OPEN
 ** <li>  SQLITE_MUTEX_STATIC_PRNG
 ** <li>  SQLITE_MUTEX_STATIC_LRU
-** <li>  SQLITE_MUTEX_STATIC_LRU2
+** <li>  SQLITE_MUTEX_STATIC_PMEM
+** <li>  SQLITE_MUTEX_STATIC_APP1
+** <li>  SQLITE_MUTEX_STATIC_APP2
 ** </ul>)^
 **
 ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
@@ -6144,6 +6181,9 @@ SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
+#define SQLITE_MUTEX_STATIC_APP1      8  /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP2      9  /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP3     10  /* For use by application */
 
 /*
 ** CAPI3REF: Retrieve the mutex for a database connection
@@ -6238,7 +6278,9 @@ SQLITE_API int sqlite3_test_control(int op, ...);
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19
 #define SQLITE_TESTCTRL_NEVER_CORRUPT           20
 #define SQLITE_TESTCTRL_VDBE_COVERAGE           21
-#define SQLITE_TESTCTRL_LAST                    21
+#define SQLITE_TESTCTRL_BYTEORDER               22
+#define SQLITE_TESTCTRL_ISINIT                  23
+#define SQLITE_TESTCTRL_LAST                    23
 
 /*
 ** CAPI3REF: SQLite Runtime Status
@@ -7222,6 +7264,9 @@ SQLITE_API void *sqlite3_wal_hook(
 ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
 ** from SQL.
 **
+** ^Checkpoints initiated by this mechanism are
+** [sqlite3_wal_checkpoint_v2|PASSIVE].
+**
 ** ^Every new [database connection] defaults to having the auto-checkpoint
 ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
 ** pages.  The use of this interface
@@ -7238,6 +7283,10 @@ SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 ** empty string, then a checkpoint is run on all databases of
 ** connection D.  ^If the database connection D is not in
 ** [WAL | write-ahead log mode] then this interface is a harmless no-op.
+** ^The [sqlite3_wal_checkpoint(D,X)] interface initiates a
+** [sqlite3_wal_checkpoint_v2|PASSIVE] checkpoint.
+** Use the [sqlite3_wal_checkpoint_v2()] interface to get a FULL
+** or RESET checkpoint.
 **
 ** ^The [wal_checkpoint pragma] can be used to invoke this interface
 ** from SQL.  ^The [sqlite3_wal_autocheckpoint()] interface and the
@@ -7260,10 +7309,12 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 **   Checkpoint as many frames as possible without waiting for any database 
 **   readers or writers to finish. Sync the db file if all frames in the log
 **   are checkpointed. This mode is the same as calling 
-**   sqlite3_wal_checkpoint(). The busy-handler callback is never invoked.
+**   sqlite3_wal_checkpoint(). The [sqlite3_busy_handler|busy-handler callback]
+**   is never invoked.
 **
 ** <dt>SQLITE_CHECKPOINT_FULL<dd>
-**   This mode blocks (calls the busy-handler callback) until there is no
+**   This mode blocks (it invokes the
+**   [sqlite3_busy_handler|busy-handler callback]) until there is no
 **   database writer and all readers are reading from the most recent database
 **   snapshot. It then checkpoints all frames in the log file and syncs the
 **   database file. This call blocks database writers while it is running,
@@ -7271,7 +7322,8 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 **
 ** <dt>SQLITE_CHECKPOINT_RESTART<dd>
 **   This mode works the same way as SQLITE_CHECKPOINT_FULL, except after 
-**   checkpointing the log file it blocks (calls the busy-handler callback)
+**   checkpointing the log file it blocks (calls the 
+**   [sqlite3_busy_handler|busy-handler callback])
 **   until all readers are reading from the database file only. This ensures 
 **   that the next client to write to the database file restarts the log file 
 **   from the beginning. This call blocks database writers while it is running,
@@ -7409,6 +7461,7 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
 /*
 ** CAPI3REF: Conflict resolution modes
+** KEYWORDS: {conflict resolution mode}
 **
 ** These constants are returned by [sqlite3_vtab_on_conflict()] to
 ** inform a [virtual table] implementation what the [ON CONFLICT] mode
@@ -7461,6 +7514,16 @@ extern "C" {
 #endif
 
 typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
+typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;
+
+/* The double-precision datatype used by RTree depends on the
+** SQLITE_RTREE_INT_ONLY compile-time option.
+*/
+#ifdef SQLITE_RTREE_INT_ONLY
+  typedef sqlite3_int64 sqlite3_rtree_dbl;
+#else
+  typedef double sqlite3_rtree_dbl;
+#endif
 
 /*
 ** Register a geometry callback named zGeom that can be used as part of an
@@ -7471,11 +7534,7 @@ typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
 SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
-#ifdef SQLITE_RTREE_INT_ONLY
-  int (*xGeom)(sqlite3_rtree_geometry*, int n, sqlite3_int64 *a, int *pRes),
-#else
-  int (*xGeom)(sqlite3_rtree_geometry*, int n, double *a, int *pRes),
-#endif
+  int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
   void *pContext
 );
 
@@ -7487,11 +7546,60 @@ SQLITE_API int sqlite3_rtree_geometry_callback(
 struct sqlite3_rtree_geometry {
   void *pContext;                 /* Copy of pContext passed to s_r_g_c() */
   int nParam;                     /* Size of array aParam[] */
-  double *aParam;                 /* Parameters passed to SQL geom function */
+  sqlite3_rtree_dbl *aParam;      /* Parameters passed to SQL geom function */
   void *pUser;                    /* Callback implementation user data */
   void (*xDelUser)(void *);       /* Called by SQLite to clean up pUser */
 };
 
+/*
+** Register a 2nd-generation geometry callback named zScore that can be 
+** used as part of an R-Tree geometry query as follows:
+**
+**   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
+*/
+SQLITE_API int sqlite3_rtree_query_callback(
+  sqlite3 *db,
+  const char *zQueryFunc,
+  int (*xQueryFunc)(sqlite3_rtree_query_info*),
+  void *pContext,
+  void (*xDestructor)(void*)
+);
+
+
+/*
+** A pointer to a structure of the following type is passed as the 
+** argument to scored geometry callback registered using
+** sqlite3_rtree_query_callback().
+**
+** Note that the first 5 fields of this structure are identical to
+** sqlite3_rtree_geometry.  This structure is a subclass of
+** sqlite3_rtree_geometry.
+*/
+struct sqlite3_rtree_query_info {
+  void *pContext;                   /* pContext from when function registered */
+  int nParam;                       /* Number of function parameters */
+  sqlite3_rtree_dbl *aParam;        /* value of function parameters */
+  void *pUser;                      /* callback can use this, if desired */
+  void (*xDelUser)(void*);          /* function to free pUser */
+  sqlite3_rtree_dbl *aCoord;        /* Coordinates of node or entry to check */
+  unsigned int *anQueue;            /* Number of pending entries in the queue */
+  int nCoord;                       /* Number of coordinates */
+  int iLevel;                       /* Level of current node or entry */
+  int mxLevel;                      /* The largest iLevel value in the tree */
+  sqlite3_int64 iRowid;             /* Rowid for current entry */
+  sqlite3_rtree_dbl rParentScore;   /* Score of parent node */
+  int eParentWithin;                /* Visibility of parent node */
+  int eWithin;                      /* OUT: Visiblity */
+  sqlite3_rtree_dbl rScore;         /* OUT: Write the score here */
+};
+
+/*
+** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
+*/
+#define NOT_WITHIN       0   /* Object completely outside of query region */
+#define PARTLY_WITHIN    1   /* Object partially overlaps query region */
+#define FULLY_WITHIN     2   /* Object fully contained within query region */
+
 
 #if 0
 }  /* end of the 'extern "C"' block */
@@ -8418,10 +8526,10 @@ typedef INT8_TYPE i8;              /* 1-byte signed integer */
 ** gives a possible range of values of approximately 1.0e986 to 1e-986.
 ** But the allowed values are "grainy".  Not every value is representable.
 ** For example, quantities 16 and 17 are both represented by a LogEst
-** of 40.  However, since LogEst quantatites are suppose to be estimates,
+** of 40.  However, since LogEst quantaties are suppose to be estimates,
 ** not exact values, this imprecision is not a problem.
 **
-** "LogEst" is short for "Logarithimic Estimate".
+** "LogEst" is short for "Logarithmic Estimate".
 **
 ** Examples:
 **      1 -> 0              20 -> 43          10000 -> 132
@@ -8439,22 +8547,39 @@ typedef INT16_TYPE LogEst;
 
 /*
 ** Macros to determine whether the machine is big or little endian,
-** evaluated at runtime.
+** and whether or not that determination is run-time or compile-time.
+**
+** For best performance, an attempt is made to guess at the byte-order
+** using C-preprocessor macros.  If that is unsuccessful, or if
+** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined
+** at run-time.
 */
 #ifdef SQLITE_AMALGAMATION
 SQLITE_PRIVATE const int sqlite3one = 1;
 #else
 SQLITE_PRIVATE const int sqlite3one;
 #endif
-#if defined(i386) || defined(__i386__) || defined(_M_IX86)\
-                             || defined(__x86_64) || defined(__x86_64__)
+#if (defined(i386)     || defined(__i386__)   || defined(_M_IX86) ||    \
+     defined(__x86_64) || defined(__x86_64__) || defined(_M_X64)  ||    \
+     defined(_M_AMD64) || defined(_M_ARM)     || defined(__x86)   ||    \
+     defined(__arm__)) && !defined(SQLITE_RUNTIME_BYTEORDER)
+# define SQLITE_BYTEORDER    1234
 # define SQLITE_BIGENDIAN    0
 # define SQLITE_LITTLEENDIAN 1
 # define SQLITE_UTF16NATIVE  SQLITE_UTF16LE
-#else
+#endif
+#if (defined(sparc)    || defined(__ppc__))  \
+    && !defined(SQLITE_RUNTIME_BYTEORDER)
+# define SQLITE_BYTEORDER    4321
+# define SQLITE_BIGENDIAN    1
+# define SQLITE_LITTLEENDIAN 0
+# define SQLITE_UTF16NATIVE  SQLITE_UTF16BE
+#endif
+#if !defined(SQLITE_BYTEORDER)
+# define SQLITE_BYTEORDER    0     /* 0 means "unknown at compile-time" */
 # define SQLITE_BIGENDIAN    (*(char *)(&sqlite3one)==0)
 # define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1)
-# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE)
+# define SQLITE_UTF16NATIVE  (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE)
 #endif
 
 /*
@@ -8769,7 +8894,9 @@ SQLITE_PRIVATE int sqlite3BtreeOpen(
 
 SQLITE_PRIVATE int sqlite3BtreeClose(Btree*);
 SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int);
-SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64);
+#if SQLITE_MAX_MMAP_SIZE>0
+SQLITE_PRIVATE   int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64);
+#endif
 SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned);
 SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*);
 SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix);
@@ -8819,6 +8946,7 @@ SQLITE_PRIVATE int sqlite3BtreeIncrVacuum(Btree *);
 
 SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*);
 SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*);
+SQLITE_PRIVATE int sqlite3BtreeClearTableOfCursor(BtCursor*);
 SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree*, int);
 
 SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue);
@@ -8893,10 +9021,11 @@ SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, i
 SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*);
 
 SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
-SQLITE_PRIVATE void sqlite3BtreeCacheOverflow(BtCursor *);
+SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *);
 SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *);
 SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);
 SQLITE_PRIVATE void sqlite3BtreeCursorHints(BtCursor *, unsigned int mask);
+SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *pBt);
 
 #ifndef NDEBUG
 SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*);
@@ -9136,7 +9265,7 @@ typedef struct VdbeOpList VdbeOpList;
 #define OP_Checkpoint     11
 #define OP_JournalMode    12
 #define OP_Vacuum         13
-#define OP_VFilter        14 /* synopsis: iPlan=r[P3] zPlan='P4'           */
+#define OP_VFilter        14 /* synopsis: iplan=r[P3] zplan='P4'           */
 #define OP_VUpdate        15 /* synopsis: data=r[P3@P2]                    */
 #define OP_Goto           16
 #define OP_Gosub          17
@@ -9163,7 +9292,7 @@ typedef struct VdbeOpList VdbeOpList;
 #define OP_MustBeInt      38
 #define OP_RealAffinity   39
 #define OP_Permutation    40
-#define OP_Compare        41
+#define OP_Compare        41 /* synopsis: r[P1@P3] <-> r[P2@P3]            */
 #define OP_Jump           42
 #define OP_Once           43
 #define OP_If             44
@@ -9174,30 +9303,30 @@ typedef struct VdbeOpList VdbeOpList;
 #define OP_Count          49 /* synopsis: r[P2]=count()                    */
 #define OP_ReadCookie     50
 #define OP_SetCookie      51
-#define OP_OpenRead       52 /* synopsis: root=P2 iDb=P3                   */
-#define OP_OpenWrite      53 /* synopsis: root=P2 iDb=P3                   */
-#define OP_OpenAutoindex  54 /* synopsis: nColumn=P2                       */
-#define OP_OpenEphemeral  55 /* synopsis: nColumn=P2                       */
-#define OP_SorterOpen     56
-#define OP_OpenPseudo     57 /* synopsis: P3 columns in r[P2]              */
-#define OP_Close          58
-#define OP_SeekLT         59
-#define OP_SeekLE         60
-#define OP_SeekGE         61
-#define OP_SeekGT         62
-#define OP_Seek           63 /* synopsis: intkey=r[P2]                     */
-#define OP_NoConflict     64 /* synopsis: key=r[P3@P4]                     */
-#define OP_NotFound       65 /* synopsis: key=r[P3@P4]                     */
-#define OP_Found          66 /* synopsis: key=r[P3@P4]                     */
-#define OP_NotExists      67 /* synopsis: intkey=r[P3]                     */
-#define OP_Sequence       68 /* synopsis: r[P2]=rowid                      */
-#define OP_NewRowid       69 /* synopsis: r[P2]=rowid                      */
-#define OP_Insert         70 /* synopsis: intkey=r[P3] data=r[P2]          */
+#define OP_ReopenIdx      52 /* synopsis: root=P2 iDb=P3                   */
+#define OP_OpenRead       53 /* synopsis: root=P2 iDb=P3                   */
+#define OP_OpenWrite      54 /* synopsis: root=P2 iDb=P3                   */
+#define OP_OpenAutoindex  55 /* synopsis: nColumn=P2                       */
+#define OP_OpenEphemeral  56 /* synopsis: nColumn=P2                       */
+#define OP_SorterOpen     57
+#define OP_OpenPseudo     58 /* synopsis: P3 columns in r[P2]              */
+#define OP_Close          59
+#define OP_SeekLT         60 /* synopsis: key=r[P3@P4]                     */
+#define OP_SeekLE         61 /* synopsis: key=r[P3@P4]                     */
+#define OP_SeekGE         62 /* synopsis: key=r[P3@P4]                     */
+#define OP_SeekGT         63 /* synopsis: key=r[P3@P4]                     */
+#define OP_Seek           64 /* synopsis: intkey=r[P2]                     */
+#define OP_NoConflict     65 /* synopsis: key=r[P3@P4]                     */
+#define OP_NotFound       66 /* synopsis: key=r[P3@P4]                     */
+#define OP_Found          67 /* synopsis: key=r[P3@P4]                     */
+#define OP_NotExists      68 /* synopsis: intkey=r[P3]                     */
+#define OP_Sequence       69 /* synopsis: r[P2]=cursor[P1].ctr++           */
+#define OP_NewRowid       70 /* synopsis: r[P2]=rowid                      */
 #define OP_Or             71 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
 #define OP_And            72 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
-#define OP_InsertInt      73 /* synopsis: intkey=P3 data=r[P2]             */
-#define OP_Delete         74
-#define OP_ResetCount     75
+#define OP_Insert         73 /* synopsis: intkey=r[P3] data=r[P2]          */
+#define OP_InsertInt      74 /* synopsis: intkey=P3 data=r[P2]             */
+#define OP_Delete         75
 #define OP_IsNull         76 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
 #define OP_NotNull        77 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
 #define OP_Ne             78 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */
@@ -9206,7 +9335,7 @@ typedef struct VdbeOpList VdbeOpList;
 #define OP_Le             81 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */
 #define OP_Lt             82 /* same as TK_LT, synopsis: if r[P1]<r[P3] goto P2 */
 #define OP_Ge             83 /* same as TK_GE, synopsis: if r[P1]>=r[P3] goto P2 */
-#define OP_SorterCompare  84 /* synopsis: if key(P1)!=rtrim(r[P3],P4) goto P2 */
+#define OP_ResetCount     84
 #define OP_BitAnd         85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
 #define OP_BitOr          86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
 #define OP_ShiftLeft      87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */
@@ -9217,68 +9346,70 @@ typedef struct VdbeOpList VdbeOpList;
 #define OP_Divide         92 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
 #define OP_Remainder      93 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
 #define OP_Concat         94 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
-#define OP_SorterData     95 /* synopsis: r[P2]=data                       */
+#define OP_SorterCompare  95 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
 #define OP_BitNot         96 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
 #define OP_String8        97 /* same as TK_STRING, synopsis: r[P2]='P4'    */
-#define OP_RowKey         98 /* synopsis: r[P2]=key                        */
-#define OP_RowData        99 /* synopsis: r[P2]=data                       */
-#define OP_Rowid         100 /* synopsis: r[P2]=rowid                      */
-#define OP_NullRow       101
-#define OP_Last          102
-#define OP_SorterSort    103
-#define OP_Sort          104
-#define OP_Rewind        105
-#define OP_SorterInsert  106
-#define OP_IdxInsert     107 /* synopsis: key=r[P2]                        */
-#define OP_IdxDelete     108 /* synopsis: key=r[P2@P3]                     */
-#define OP_IdxRowid      109 /* synopsis: r[P2]=rowid                      */
-#define OP_IdxLE         110 /* synopsis: key=r[P3@P4]                     */
-#define OP_IdxGT         111 /* synopsis: key=r[P3@P4]                     */
-#define OP_IdxLT         112 /* synopsis: key=r[P3@P4]                     */
-#define OP_IdxGE         113 /* synopsis: key=r[P3@P4]                     */
-#define OP_Destroy       114
-#define OP_Clear         115
-#define OP_CreateIndex   116 /* synopsis: r[P2]=root iDb=P1                */
-#define OP_CreateTable   117 /* synopsis: r[P2]=root iDb=P1                */
-#define OP_ParseSchema   118
-#define OP_LoadAnalysis  119
-#define OP_DropTable     120
-#define OP_DropIndex     121
-#define OP_DropTrigger   122
-#define OP_IntegrityCk   123
-#define OP_RowSetAdd     124 /* synopsis: rowset(P1)=r[P2]                 */
-#define OP_RowSetRead    125 /* synopsis: r[P3]=rowset(P1)                 */
-#define OP_RowSetTest    126 /* synopsis: if r[P3] in rowset(P1) goto P2   */
-#define OP_Program       127
-#define OP_Param         128
-#define OP_FkCounter     129 /* synopsis: fkctr[P1]+=P2                    */
-#define OP_FkIfZero      130 /* synopsis: if fkctr[P1]==0 goto P2          */
-#define OP_MemMax        131 /* synopsis: r[P1]=max(r[P1],r[P2])           */
-#define OP_IfPos         132 /* synopsis: if r[P1]>0 goto P2               */
+#define OP_SorterData     98 /* synopsis: r[P2]=data                       */
+#define OP_RowKey         99 /* synopsis: r[P2]=key                        */
+#define OP_RowData       100 /* synopsis: r[P2]=data                       */
+#define OP_Rowid         101 /* synopsis: r[P2]=rowid                      */
+#define OP_NullRow       102
+#define OP_Last          103
+#define OP_SorterSort    104
+#define OP_Sort          105
+#define OP_Rewind        106
+#define OP_SorterInsert  107
+#define OP_IdxInsert     108 /* synopsis: key=r[P2]                        */
+#define OP_IdxDelete     109 /* synopsis: key=r[P2@P3]                     */
+#define OP_IdxRowid      110 /* synopsis: r[P2]=rowid                      */
+#define OP_IdxLE         111 /* synopsis: key=r[P3@P4]                     */
+#define OP_IdxGT         112 /* synopsis: key=r[P3@P4]                     */
+#define OP_IdxLT         113 /* synopsis: key=r[P3@P4]                     */
+#define OP_IdxGE         114 /* synopsis: key=r[P3@P4]                     */
+#define OP_Destroy       115
+#define OP_Clear         116
+#define OP_ResetSorter   117
+#define OP_CreateIndex   118 /* synopsis: r[P2]=root iDb=P1                */
+#define OP_CreateTable   119 /* synopsis: r[P2]=root iDb=P1                */
+#define OP_ParseSchema   120
+#define OP_LoadAnalysis  121
+#define OP_DropTable     122
+#define OP_DropIndex     123
+#define OP_DropTrigger   124
+#define OP_IntegrityCk   125
+#define OP_RowSetAdd     126 /* synopsis: rowset(P1)=r[P2]                 */
+#define OP_RowSetRead    127 /* synopsis: r[P3]=rowset(P1)                 */
+#define OP_RowSetTest    128 /* synopsis: if r[P3] in rowset(P1) goto P2   */
+#define OP_Program       129
+#define OP_Param         130
+#define OP_FkCounter     131 /* synopsis: fkctr[P1]+=P2                    */
+#define OP_FkIfZero      132 /* synopsis: if fkctr[P1]==0 goto P2          */
 #define OP_Real          133 /* same as TK_FLOAT, synopsis: r[P2]=P4       */
-#define OP_IfNeg         134 /* synopsis: if r[P1]<0 goto P2               */
-#define OP_IfZero        135 /* synopsis: r[P1]+=P3, if r[P1]==0 goto P2   */
-#define OP_AggFinal      136 /* synopsis: accum=r[P1] N=P2                 */
-#define OP_IncrVacuum    137
-#define OP_Expire        138
-#define OP_TableLock     139 /* synopsis: iDb=P1 root=P2 write=P3          */
-#define OP_VBegin        140
-#define OP_VCreate       141
-#define OP_VDestroy      142
+#define OP_MemMax        134 /* synopsis: r[P1]=max(r[P1],r[P2])           */
+#define OP_IfPos         135 /* synopsis: if r[P1]>0 goto P2               */
+#define OP_IfNeg         136 /* synopsis: r[P1]+=P3, if r[P1]<0 goto P2    */
+#define OP_IfZero        137 /* synopsis: r[P1]+=P3, if r[P1]==0 goto P2   */
+#define OP_AggFinal      138 /* synopsis: accum=r[P1] N=P2                 */
+#define OP_IncrVacuum    139
+#define OP_Expire        140
+#define OP_TableLock     141 /* synopsis: iDb=P1 root=P2 write=P3          */
+#define OP_VBegin        142
 #define OP_ToText        143 /* same as TK_TO_TEXT                         */
 #define OP_ToBlob        144 /* same as TK_TO_BLOB                         */
 #define OP_ToNumeric     145 /* same as TK_TO_NUMERIC                      */
 #define OP_ToInt         146 /* same as TK_TO_INT                          */
 #define OP_ToReal        147 /* same as TK_TO_REAL                         */
-#define OP_VOpen         148
-#define OP_VColumn       149 /* synopsis: r[P3]=vcolumn(P2)                */
-#define OP_VNext         150
-#define OP_VRename       151
-#define OP_Pagecount     152
-#define OP_MaxPgcnt      153
-#define OP_Init          154 /* synopsis: Start at P2                      */
-#define OP_Noop          155
-#define OP_Explain       156
+#define OP_VCreate       148
+#define OP_VDestroy      149
+#define OP_VOpen         150
+#define OP_VColumn       151 /* synopsis: r[P3]=vcolumn(P2)                */
+#define OP_VNext         152
+#define OP_VRename       153
+#define OP_Pagecount     154
+#define OP_MaxPgcnt      155
+#define OP_Init          156 /* synopsis: Start at P2                      */
+#define OP_Noop          157
+#define OP_Explain       158
 
 
 /* Properties such as "out2" or "jump" that are specified in
@@ -9300,19 +9431,19 @@ typedef struct VdbeOpList VdbeOpList;
 /*  32 */ 0x00, 0x00, 0x20, 0x00, 0x00, 0x04, 0x05, 0x04,\
 /*  40 */ 0x00, 0x00, 0x01, 0x01, 0x05, 0x05, 0x00, 0x00,\
 /*  48 */ 0x00, 0x02, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00,\
-/*  56 */ 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x08,\
-/*  64 */ 0x11, 0x11, 0x11, 0x11, 0x02, 0x02, 0x00, 0x4c,\
+/*  56 */ 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11,\
+/*  64 */ 0x08, 0x11, 0x11, 0x11, 0x11, 0x02, 0x02, 0x4c,\
 /*  72 */ 0x4c, 0x00, 0x00, 0x00, 0x05, 0x05, 0x15, 0x15,\
 /*  80 */ 0x15, 0x15, 0x15, 0x15, 0x00, 0x4c, 0x4c, 0x4c,\
 /*  88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x00,\
-/*  96 */ 0x24, 0x02, 0x00, 0x00, 0x02, 0x00, 0x01, 0x01,\
-/* 104 */ 0x01, 0x01, 0x08, 0x08, 0x00, 0x02, 0x01, 0x01,\
-/* 112 */ 0x01, 0x01, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00,\
-/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x0c, 0x45, 0x15, 0x01,\
-/* 128 */ 0x02, 0x00, 0x01, 0x08, 0x05, 0x02, 0x05, 0x05,\
-/* 136 */ 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,\
-/* 144 */ 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x01, 0x00,\
-/* 152 */ 0x02, 0x02, 0x01, 0x00, 0x00,}
+/*  96 */ 0x24, 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x01,\
+/* 104 */ 0x01, 0x01, 0x01, 0x08, 0x08, 0x00, 0x02, 0x01,\
+/* 112 */ 0x01, 0x01, 0x01, 0x02, 0x00, 0x00, 0x02, 0x02,\
+/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x45,\
+/* 128 */ 0x15, 0x01, 0x02, 0x00, 0x01, 0x02, 0x08, 0x05,\
+/* 136 */ 0x05, 0x05, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04,\
+/* 144 */ 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00,\
+/* 152 */ 0x01, 0x00, 0x02, 0x02, 0x01, 0x00, 0x00,}
 
 /************** End of opcodes.h *********************************************/
 /************** Continuing where we left off in vdbe.h ***********************/
@@ -9367,12 +9498,13 @@ SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe*, int);
 #ifndef SQLITE_OMIT_TRACE
 SQLITE_PRIVATE   char *sqlite3VdbeExpandSql(Vdbe*, const char*);
 #endif
+SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*);
 
 SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*);
-SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,const UnpackedRecord*,int);
+SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*,int);
 SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **);
 
-typedef int (*RecordCompare)(int,const void*,const UnpackedRecord*,int);
+typedef int (*RecordCompare)(int,const void*,UnpackedRecord*,int);
 SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*);
 
 #ifndef SQLITE_OMIT_TRIGGER
@@ -9850,83 +9982,71 @@ SQLITE_PRIVATE void sqlite3PCacheSetDefault(void);
 #define _SQLITE_OS_H_
 
 /*
-** Figure out if we are dealing with Unix, Windows, or some other
-** operating system.  After the following block of preprocess macros,
-** all of SQLITE_OS_UNIX, SQLITE_OS_WIN, and SQLITE_OS_OTHER 
-** will defined to either 1 or 0.  One of the four will be 1.  The other 
-** three will be 0.
+** Attempt to automatically detect the operating system and setup the
+** necessary pre-processor macros for it.
 */
-#if defined(SQLITE_OS_OTHER)
-# if SQLITE_OS_OTHER==1
-#   undef SQLITE_OS_UNIX
-#   define SQLITE_OS_UNIX 0
-#   undef SQLITE_OS_WIN
-#   define SQLITE_OS_WIN 0
-# else
-#   undef SQLITE_OS_OTHER
-# endif
-#endif
-#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER)
-# define SQLITE_OS_OTHER 0
-# ifndef SQLITE_OS_WIN
-#   if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || defined(__MINGW32__) || defined(__BORLANDC__)
-#     define SQLITE_OS_WIN 1
-#     define SQLITE_OS_UNIX 0
-#   else
-#     define SQLITE_OS_WIN 0
-#     define SQLITE_OS_UNIX 1
-#  endif
-# else
-#  define SQLITE_OS_UNIX 0
-# endif
-#else
-# ifndef SQLITE_OS_WIN
-#  define SQLITE_OS_WIN 0
-# endif
-#endif
-
-#if SQLITE_OS_WIN
-# include <windows.h>
-#endif
-
+/************** Include os_setup.h in the middle of os.h *********************/
+/************** Begin file os_setup.h ****************************************/
 /*
-** Determine if we are dealing with Windows NT.
+** 2013 November 25
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
 **
-** We ought to be able to determine if we are compiling for win98 or winNT
-** using the _WIN32_WINNT macro as follows:
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
 **
-** #if defined(_WIN32_WINNT)
-** # define SQLITE_OS_WINNT 1
-** #else
-** # define SQLITE_OS_WINNT 0
-** #endif
+******************************************************************************
 **
-** However, vs2005 does not set _WIN32_WINNT by default, as it ought to,
-** so the above test does not work.  We'll just assume that everything is
-** winNT unless the programmer explicitly says otherwise by setting
-** SQLITE_OS_WINNT to 0.
+** This file contains pre-processor directives related to operating system
+** detection and/or setup.
 */
-#if SQLITE_OS_WIN && !defined(SQLITE_OS_WINNT)
-# define SQLITE_OS_WINNT 1
-#endif
+#ifndef _OS_SETUP_H_
+#define _OS_SETUP_H_
 
 /*
-** Determine if we are dealing with WindowsCE - which has a much
-** reduced API.
+** Figure out if we are dealing with Unix, Windows, or some other operating
+** system.
+**
+** After the following block of preprocess macros, all of SQLITE_OS_UNIX,
+** SQLITE_OS_WIN, and SQLITE_OS_OTHER will defined to either 1 or 0.  One of
+** the three will be 1.  The other two will be 0.
 */
-#if defined(_WIN32_WCE)
-# define SQLITE_OS_WINCE 1
+#if defined(SQLITE_OS_OTHER)
+#  if SQLITE_OS_OTHER==1
+#    undef SQLITE_OS_UNIX
+#    define SQLITE_OS_UNIX 0
+#    undef SQLITE_OS_WIN
+#    define SQLITE_OS_WIN 0
+#  else
+#    undef SQLITE_OS_OTHER
+#  endif
+#endif
+#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER)
+#  define SQLITE_OS_OTHER 0
+#  ifndef SQLITE_OS_WIN
+#    if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || \
+        defined(__MINGW32__) || defined(__BORLANDC__)
+#      define SQLITE_OS_WIN 1
+#      define SQLITE_OS_UNIX 0
+#    else
+#      define SQLITE_OS_WIN 0
+#      define SQLITE_OS_UNIX 1
+#    endif
+#  else
+#    define SQLITE_OS_UNIX 0
+#  endif
 #else
-# define SQLITE_OS_WINCE 0
+#  ifndef SQLITE_OS_WIN
+#    define SQLITE_OS_WIN 0
+#  endif
 #endif
 
-/*
-** Determine if we are dealing with WinRT, which provides only a subset of
-** the full Win32 API.
-*/
-#if !defined(SQLITE_OS_WINRT)
-# define SQLITE_OS_WINRT 0
-#endif
+#endif /* _OS_SETUP_H_ */
+
+/************** End of os_setup.h ********************************************/
+/************** Continuing where we left off in os.h *************************/
 
 /* If the SET_FULLSYNC macro is not defined above, then make it
 ** a no-op
@@ -10230,7 +10350,7 @@ struct Schema {
   Table *pSeqTab;      /* The sqlite_sequence table used by AUTOINCREMENT */
   u8 file_format;      /* Schema format version for this file */
   u8 enc;              /* Text encoding used by this database */
-  u16 flags;           /* Flags associated with this schema */
+  u16 schemaFlags;     /* Flags associated with this schema */
   int cache_size;      /* Number of pages to use in the cache */
 };
 
@@ -10238,10 +10358,10 @@ struct Schema {
 ** These macros can be used to test, set, or clear bits in the 
 ** Db.pSchema->flags field.
 */
-#define DbHasProperty(D,I,P)     (((D)->aDb[I].pSchema->flags&(P))==(P))
-#define DbHasAnyProperty(D,I,P)  (((D)->aDb[I].pSchema->flags&(P))!=0)
-#define DbSetProperty(D,I,P)     (D)->aDb[I].pSchema->flags|=(P)
-#define DbClearProperty(D,I,P)   (D)->aDb[I].pSchema->flags&=~(P)
+#define DbHasProperty(D,I,P)     (((D)->aDb[I].pSchema->schemaFlags&(P))==(P))
+#define DbHasAnyProperty(D,I,P)  (((D)->aDb[I].pSchema->schemaFlags&(P))!=0)
+#define DbSetProperty(D,I,P)     (D)->aDb[I].pSchema->schemaFlags|=(P)
+#define DbClearProperty(D,I,P)   (D)->aDb[I].pSchema->schemaFlags&=~(P)
 
 /*
 ** Allowed values for the DB.pSchema->flags field.
@@ -10825,12 +10945,15 @@ struct Table {
 #ifndef SQLITE_OMIT_CHECK
   ExprList *pCheck;    /* All CHECK constraints */
 #endif
-  tRowcnt nRowEst;     /* Estimated rows in table - from sqlite_stat1 table */
+  LogEst nRowLogEst;   /* Estimated rows in table - from sqlite_stat1 table */
   int tnum;            /* Root BTree node for this table (see note above) */
   i16 iPKey;           /* If not negative, use aCol[iPKey] as the primary key */
   i16 nCol;            /* Number of columns in this table */
   u16 nRef;            /* Number of pointers to this Table */
   LogEst szTabRow;     /* Estimated size of each table row in bytes */
+#ifdef SQLITE_ENABLE_COSTMULT
+  LogEst costMult;     /* Cost multiplier for using this table */
+#endif
   u8 tabFlags;         /* Mask of TF_* values */
   u8 keyConf;          /* What to do in case of uniqueness conflict on iPKey */
 #ifndef SQLITE_OMIT_ALTERTABLE
@@ -10998,6 +11121,7 @@ struct UnpackedRecord {
   KeyInfo *pKeyInfo;  /* Collation and sort-order information */
   u16 nField;         /* Number of entries in apMem[] */
   i8 default_rc;      /* Comparison result if keys are equal */
+  u8 isCorrupt;       /* Corruption detected by xRecordCompare() */
   Mem *aMem;          /* Values */
   int r1;             /* Value to return if (lhs > rhs) */
   int r2;             /* Value to return if (rhs < lhs) */
@@ -11033,7 +11157,7 @@ struct UnpackedRecord {
 struct Index {
   char *zName;             /* Name of this index */
   i16 *aiColumn;           /* Which columns are used by this index.  1st is 0 */
-  tRowcnt *aiRowEst;       /* From ANALYZE: Est. rows selected by each column */
+  LogEst *aiRowLogEst;     /* From ANALYZE: Est. rows selected by each column */
   Table *pTable;           /* The SQL table being indexed */
   char *zColAff;           /* String defining the affinity of each column */
   Index *pNext;            /* The next index associated with the same table */
@@ -11047,7 +11171,7 @@ struct Index {
   u16 nKeyCol;             /* Number of columns forming the key */
   u16 nColumn;             /* Number of columns stored in the index */
   u8 onError;              /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */
-  unsigned autoIndex:2;    /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */
+  unsigned idxType:2;      /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */
   unsigned bUnordered:1;   /* Use this index for == or IN queries only */
   unsigned uniqNotNull:1;  /* True if UNIQUE and NOT NULL for all columns */
   unsigned isResized:1;    /* True if resizeIndexObject() has been called */
@@ -11061,6 +11185,19 @@ struct Index {
 };
 
 /*
+** Allowed values for Index.idxType
+*/
+#define SQLITE_IDXTYPE_APPDEF      0   /* Created using CREATE INDEX */
+#define SQLITE_IDXTYPE_UNIQUE      1   /* Implements a UNIQUE constraint */
+#define SQLITE_IDXTYPE_PRIMARYKEY  2   /* Is the PRIMARY KEY for the table */
+
+/* Return true if index X is a PRIMARY KEY index */
+#define IsPrimaryKeyIndex(X)  ((X)->idxType==SQLITE_IDXTYPE_PRIMARYKEY)
+
+/* Return true if index X is a UNIQUE index */
+#define IsUniqueIndex(X)      ((X)->onError!=OE_None)
+
+/*
 ** Each sample stored in the sqlite_stat3 table is represented in memory 
 ** using a structure of this type.  See documentation at the top of the
 ** analyze.c source file for additional information.
@@ -11264,8 +11401,8 @@ struct Expr {
 #define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */
 #define EP_DblQuoted 0x000040 /* token.z was originally in "..." */
 #define EP_InfixFunc 0x000080 /* True for an infix function: LIKE, GLOB, etc */
-#define EP_Collate   0x000100 /* Tree contains a TK_COLLATE opeartor */
-      /* unused      0x000200 */
+#define EP_Collate   0x000100 /* Tree contains a TK_COLLATE operator */
+#define EP_Generic   0x000200 /* Ignore COLLATE or affinity on this tree */
 #define EP_IntValue  0x000400 /* Integer value contained in u.iValue */
 #define EP_xIsSelect 0x000800 /* x.pSelect is valid (otherwise x.pList is) */
 #define EP_Skip      0x001000 /* COLLATE, AS, or UNLIKELY */
@@ -11329,7 +11466,6 @@ struct Expr {
 */
 struct ExprList {
   int nExpr;             /* Number of expressions on the list */
-  int iECursor;          /* VDBE Cursor associated with this ExprList */
   struct ExprList_item { /* For each expression in the list */
     Expr *pExpr;            /* The list of expressions */
     char *zName;            /* Token associated with this expression */
@@ -11479,6 +11615,8 @@ struct SrcList {
 #define WHERE_GROUPBY          0x0100 /* pOrderBy is really a GROUP BY */
 #define WHERE_DISTINCTBY       0x0200 /* pOrderby is really a DISTINCT clause */
 #define WHERE_WANT_DISTINCT    0x0400 /* All output needs to be distinct */
+#define WHERE_SORTBYGROUP      0x0800 /* Support sqlite3WhereIsSorted() */
+#define WHERE_REOPEN_IDX       0x1000 /* Try to use OP_ReopenIdx */
 
 /* Allowed return values from sqlite3WhereIsDistinct()
 */
@@ -11553,7 +11691,7 @@ struct Select {
   u8 op;                 /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
   u16 selFlags;          /* Various SF_* values */
   int iLimit, iOffset;   /* Memory registers holding LIMIT & OFFSET counters */
-  int addrOpenEphm[3];   /* OP_OpenEphem opcodes related to this select */
+  int addrOpenEphm[2];   /* OP_OpenEphem opcodes related to this select */
   u64 nSelectRow;        /* Estimated number of result rows */
   SrcList *pSrc;         /* The FROM clause */
   Expr *pWhere;          /* The WHERE clause */
@@ -11577,9 +11715,9 @@ struct Select {
 #define SF_UsesEphemeral   0x0008  /* Uses the OpenEphemeral opcode */
 #define SF_Expanded        0x0010  /* sqlite3SelectExpand() called on this */
 #define SF_HasTypeInfo     0x0020  /* FROM subqueries have Table metadata */
-#define SF_UseSorter       0x0040  /* Sort using a sorter */
+                    /*     0x0040  NOT USED */
 #define SF_Values          0x0080  /* Synthesized from VALUES clause */
-#define SF_Materialize     0x0100  /* NOT USED */
+                    /*     0x0100  NOT USED */
 #define SF_NestedFrom      0x0200  /* Part of a parenthesized FROM clause */
 #define SF_MaybeConvert    0x0400  /* Need convertCompoundSelectToSubquery() */
 #define SF_Recursive       0x0800  /* The recursive part of a recursive CTE */
@@ -11632,13 +11770,15 @@ struct Select {
 **                     starting with pDest->iSdst.
 **
 **     SRT_Table       Store results in temporary table pDest->iSDParm.
-**                     This is like SRT_EphemTab except that the table
-**                     is assumed to already be open.
+**     SRT_Fifo        This is like SRT_EphemTab except that the table
+**                     is assumed to already be open.  SRT_Fifo has
+**                     the additional property of being able to ignore
+**                     the ORDER BY clause.
 **
-**     SRT_DistTable   Store results in a temporary table pDest->iSDParm.
+**     SRT_DistFifo    Store results in a temporary table pDest->iSDParm.
 **                     But also use temporary table pDest->iSDParm+1 as
 **                     a record of all prior results and ignore any duplicate
-**                     rows.  Name means:  "Distinct Table".
+**                     rows.  Name means:  "Distinct Fifo".
 **
 **     SRT_Queue       Store results in priority queue pDest->iSDParm (really
 **                     an index).  Append a sequence number so that all entries
@@ -11652,19 +11792,20 @@ struct Select {
 #define SRT_Except       2  /* Remove result from a UNION index */
 #define SRT_Exists       3  /* Store 1 if the result is not empty */
 #define SRT_Discard      4  /* Do not save the results anywhere */
+#define SRT_Fifo         5  /* Store result as data with an automatic rowid */
+#define SRT_DistFifo     6  /* Like SRT_Fifo, but unique results only */
+#define SRT_Queue        7  /* Store result in an queue */
+#define SRT_DistQueue    8  /* Like SRT_Queue, but unique results only */
 
 /* The ORDER BY clause is ignored for all of the above */
-#define IgnorableOrderby(X) ((X->eDest)<=SRT_Discard)
+#define IgnorableOrderby(X) ((X->eDest)<=SRT_DistQueue)
 
-#define SRT_Output       5  /* Output each row of result */
-#define SRT_Mem          6  /* Store result in a memory cell */
-#define SRT_Set          7  /* Store results as keys in an index */
-#define SRT_EphemTab     8  /* Create transient tab and store like SRT_Table */
-#define SRT_Coroutine    9  /* Generate a single row of result */
-#define SRT_Table       10  /* Store result as data with an automatic rowid */
-#define SRT_DistTable   11  /* Like SRT_Table, but unique results only */
-#define SRT_Queue       12  /* Store result in an queue */
-#define SRT_DistQueue   13  /* Like SRT_Queue, but unique results only */
+#define SRT_Output       9  /* Output each row of result */
+#define SRT_Mem         10  /* Store result in a memory cell */
+#define SRT_Set         11  /* Store results as keys in an index */
+#define SRT_EphemTab    12  /* Create transient tab and store like SRT_Table */
+#define SRT_Coroutine   13  /* Generate a single row of result */
+#define SRT_Table       14  /* Store result as data with an automatic rowid */
 
 /*
 ** An instance of this object describes where to put of the results of
@@ -11732,9 +11873,19 @@ struct TriggerPrg {
 ** The yDbMask datatype for the bitmask of all attached databases.
 */
 #if SQLITE_MAX_ATTACHED>30
-  typedef sqlite3_uint64 yDbMask;
+  typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8];
+# define DbMaskTest(M,I)    (((M)[(I)/8]&(1<<((I)&7)))!=0)
+# define DbMaskZero(M)      memset((M),0,sizeof(M))
+# define DbMaskSet(M,I)     (M)[(I)/8]|=(1<<((I)&7))
+# define DbMaskAllZero(M)   sqlite3DbMaskAllZero(M)
+# define DbMaskNonZero(M)   (sqlite3DbMaskAllZero(M)==0)
 #else
   typedef unsigned int yDbMask;
+# define DbMaskTest(M,I)    (((M)&(((yDbMask)1)<<(I)))!=0)
+# define DbMaskZero(M)      (M)=0
+# define DbMaskSet(M,I)     (M)|=(((yDbMask)1)<<(I))
+# define DbMaskAllZero(M)   (M)==0
+# define DbMaskNonZero(M)   (M)!=0
 #endif
 
 /*
@@ -11762,8 +11913,6 @@ struct Parse {
   u8 checkSchema;      /* Causes schema cookie check after an error */
   u8 nested;           /* Number of nested calls to the parser/code generator */
   u8 nTempReg;         /* Number of temporary registers in aTempReg[] */
-  u8 nColCache;        /* Number of entries in aColCache[] */
-  u8 iColCache;        /* Next entry in aColCache[] to replace */
   u8 isMultiWrite;     /* True if statement may modify/insert multiple rows */
   u8 mayAbort;         /* True if statement may throw an ABORT exception */
   u8 hasCompound;      /* Need to invoke convertCompoundSelectToSubquery() */
@@ -12061,11 +12210,10 @@ struct Sqlite3Config {
   int isMutexInit;                  /* True after mutexes are initialized */
   int isMallocInit;                 /* True after malloc is initialized */
   int isPCacheInit;                 /* True after malloc is initialized */
-  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
   int nRefInitMutex;                /* Number of users of pInitMutex */
+  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
   void (*xLog)(void*,int,const char*); /* Function for logging */
   void *pLogArg;                       /* First argument to xLog() */
-  int bLocaltimeFault;              /* True to fail localtime() calls */
 #ifdef SQLITE_ENABLE_SQLLOG
   void(*xSqllog)(void*,sqlite3*,const char*, int);
   void *pSqllogArg;
@@ -12077,6 +12225,10 @@ struct Sqlite3Config {
   void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx);  /* Callback */
   void *pVdbeBranchArg;                                     /* 1st argument */
 #endif
+#ifndef SQLITE_OMIT_BUILTIN_TEST
+  int (*xTestCallback)(int);        /* Invoked by sqlite3FaultSim() */
+#endif
+  int bLocaltimeFault;              /* True to fail localtime() calls */
 };
 
 /*
@@ -12378,6 +12530,12 @@ SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*,
 SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
 SQLITE_PRIVATE int sqlite3CodeOnce(Parse *);
 
+#ifdef SQLITE_OMIT_BUILTIN_TEST
+# define sqlite3FaultSim(X) SQLITE_OK
+#else
+SQLITE_PRIVATE   int sqlite3FaultSim(int);
+#endif
+
 SQLITE_PRIVATE Bitvec *sqlite3BitvecCreate(u32);
 SQLITE_PRIVATE int sqlite3BitvecTest(Bitvec*, u32);
 SQLITE_PRIVATE int sqlite3BitvecSet(Bitvec*, u32);
@@ -12389,7 +12547,7 @@ SQLITE_PRIVATE int sqlite3BitvecBuiltinTest(int,int*);
 SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int);
 SQLITE_PRIVATE void sqlite3RowSetClear(RowSet*);
 SQLITE_PRIVATE void sqlite3RowSetInsert(RowSet*, i64);
-SQLITE_PRIVATE int sqlite3RowSetTest(RowSet*, u8 iBatch, i64);
+SQLITE_PRIVATE int sqlite3RowSetTest(RowSet*, int iBatch, i64);
 SQLITE_PRIVATE int sqlite3RowSetNext(RowSet*, i64*);
 
 SQLITE_PRIVATE void sqlite3CreateView(Parse*,Token*,Token*,Token*,Select*,int,int);
@@ -12400,6 +12558,9 @@ SQLITE_PRIVATE   int sqlite3ViewGetColumnNames(Parse*,Table*);
 # define sqlite3ViewGetColumnNames(A,B) 0
 #endif
 
+#if SQLITE_MAX_ATTACHED>30
+SQLITE_PRIVATE   int sqlite3DbMaskAllZero(yDbMask);
+#endif
 SQLITE_PRIVATE void sqlite3DropTable(Parse*, SrcList*, int, int);
 SQLITE_PRIVATE void sqlite3CodeDropTable(Parse*, Table*, int, int);
 SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3*, Table*);
@@ -12445,6 +12606,7 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo*);
 SQLITE_PRIVATE u64 sqlite3WhereOutputRowCount(WhereInfo*);
 SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo*);
 SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo*);
+SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo*);
 SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo*);
 SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo*);
 SQLITE_PRIVATE int sqlite3WhereOkOnePass(WhereInfo*, int*);
@@ -12453,7 +12615,7 @@ SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int
 SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse*, int, int, int);
 SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse*, int, int, int);
 SQLITE_PRIVATE void sqlite3ExprCachePush(Parse*);
-SQLITE_PRIVATE void sqlite3ExprCachePop(Parse*, int);
+SQLITE_PRIVATE void sqlite3ExprCachePop(Parse*);
 SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse*, int, int);
 SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse*);
 SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse*, int, int);
@@ -12505,6 +12667,7 @@ SQLITE_PRIVATE int sqlite3IsRowid(const char*);
 SQLITE_PRIVATE void sqlite3GenerateRowDelete(Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8);
 SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*);
 SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int);
+SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int);
 SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int,
                                      u8,u8,int,int*);
 SQLITE_PRIVATE void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int);
@@ -12648,6 +12811,7 @@ SQLITE_PRIVATE char sqlite3CompareAffinity(Expr *pExpr, char aff2);
 SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
 SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr);
 SQLITE_PRIVATE int sqlite3Atoi64(const char*, i64*, int, u8);
+SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char*, i64*);
 SQLITE_PRIVATE void sqlite3Error(sqlite3*, int, const char*,...);
 SQLITE_PRIVATE void *sqlite3HexToBlob(sqlite3*, const char *z, int n);
 SQLITE_PRIVATE u8 sqlite3HexToInt(int h);
@@ -12662,7 +12826,7 @@ SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse);
 SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int);
 SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
 SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
-SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, Token*);
+SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*);
 SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*);
 SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*);
 SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *, CollSeq *);
@@ -12677,7 +12841,7 @@ SQLITE_PRIVATE void sqlite3FileSuffix3(const char*, char*);
 #else
 # define sqlite3FileSuffix3(X,Y)
 #endif
-SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z,int);
+SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z,u8);
 
 SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value*, u8);
 SQLITE_PRIVATE int sqlite3ValueBytes(sqlite3_value*, u8);
@@ -12762,7 +12926,9 @@ SQLITE_PRIVATE void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
 SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void);
 SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*);
+SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**);
 SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord*);
+SQLITE_PRIVATE int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**);
 #endif
 
 /*
@@ -12899,11 +13065,21 @@ SQLITE_PRIVATE   void sqlite3EndBenignMalloc(void);
   #define sqlite3EndBenignMalloc()
 #endif
 
-#define IN_INDEX_ROWID           1
-#define IN_INDEX_EPH             2
-#define IN_INDEX_INDEX_ASC       3
-#define IN_INDEX_INDEX_DESC      4
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, int*);
+/*
+** Allowed return values from sqlite3FindInIndex()
+*/
+#define IN_INDEX_ROWID        1   /* Search the rowid of the table */
+#define IN_INDEX_EPH          2   /* Search an ephemeral b-tree */
+#define IN_INDEX_INDEX_ASC    3   /* Existing index ASCENDING */
+#define IN_INDEX_INDEX_DESC   4   /* Existing index DESCENDING */
+#define IN_INDEX_NOOP         5   /* No table available. Use comparisons */
+/*
+** Allowed flags for the 3rd parameter to sqlite3FindInIndex().
+*/
+#define IN_INDEX_NOOP_OK     0x0001  /* OK to return IN_INDEX_NOOP */
+#define IN_INDEX_MEMBERSHIP  0x0002  /* IN operator used for membership test */
+#define IN_INDEX_LOOP        0x0004  /* IN operator used as a loop */
+SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
 
 #ifdef SQLITE_ENABLE_ATOMIC_WRITE
 SQLITE_PRIVATE   int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
@@ -13181,15 +13357,22 @@ SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config = {
    0,                         /* isMutexInit */
    0,                         /* isMallocInit */
    0,                         /* isPCacheInit */
-   0,                         /* pInitMutex */
    0,                         /* nRefInitMutex */
+   0,                         /* pInitMutex */
    0,                         /* xLog */
    0,                         /* pLogArg */
-   0,                         /* bLocaltimeFault */
 #ifdef SQLITE_ENABLE_SQLLOG
    0,                         /* xSqllog */
-   0                          /* pSqllogArg */
+   0,                         /* pSqllogArg */
+#endif
+#ifdef SQLITE_VDBE_COVERAGE
+   0,                         /* xVdbeBranch */
+   0,                         /* pVbeBranchArg */
+#endif
+#ifndef SQLITE_OMIT_BUILTIN_TEST
+   0,                         /* xTestCallback */
 #endif
+   0                          /* bLocaltimeFault */
 };
 
 /*
@@ -13743,13 +13926,18 @@ struct VdbeCursor {
   int pseudoTableReg;   /* Register holding pseudotable content. */
   i16 nField;           /* Number of fields in the header */
   u16 nHdrParsed;       /* Number of header fields parsed so far */
+#ifdef SQLITE_DEBUG
+  u8 seekOp;            /* Most recent seek operation on this cursor */
+#endif
   i8 iDb;               /* Index of cursor database in db->aDb[] (or -1) */
   u8 nullRow;           /* True if pointing to a row with no data */
   u8 rowidIsValid;      /* True if lastRowid is valid */
   u8 deferredMoveto;    /* A call to sqlite3BtreeMoveto() is needed */
+  Bool isEphemeral:1;   /* True for an ephemeral table */
   Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */
   Bool isTable:1;       /* True if a table requiring integer keys */
   Bool isOrdered:1;     /* True if the underlying table is BTREE_UNORDERED */
+  Pgno pgnoRoot;        /* Root page of the open btree cursor */
   sqlite3_vtab_cursor *pVtabCursor;  /* The cursor for a virtual table */
   i64 seqCount;         /* Sequence counter */
   i64 movetoTarget;     /* Argument to the deferred sqlite3BtreeMoveto() */
@@ -14066,9 +14254,8 @@ SQLITE_PRIVATE u32 sqlite3VdbeSerialGet(const unsigned char*, u32, Mem*);
 SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(Vdbe*, int, int);
 
 int sqlite2BtreeKeyCompare(BtCursor *, const void *, int, int, int *);
-SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(VdbeCursor*,const UnpackedRecord*,int*);
+SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(VdbeCursor*,UnpackedRecord*,int*);
 SQLITE_PRIVATE int sqlite3VdbeIdxRowid(sqlite3*, BtCursor *, i64 *);
-SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*);
 SQLITE_PRIVATE int sqlite3VdbeExec(Vdbe*);
 SQLITE_PRIVATE int sqlite3VdbeList(Vdbe*);
 SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe*);
@@ -14112,6 +14299,7 @@ SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *);
 SQLITE_PRIVATE int sqlite3VdbeTransferError(Vdbe *p);
 
 SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, VdbeCursor *);
+SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *, VdbeSorter *);
 SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *, VdbeCursor *);
 SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *, Mem *);
 SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *, int *);
@@ -14823,7 +15011,7 @@ static void clearYMD_HMS_TZ(DateTime *p){
 #define HAVE_LOCALTIME_S 1
 #endif
 
-#if SQLITE_OS_WINCE >= 1
+#if defined(_WIN32_WCE)
 struct tm *__cdecl localtime(const time_t *t);
 #endif
 
@@ -17855,7 +18043,7 @@ static void *memsys5MallocUnsafe(int nByte){
   ** block.  If not, then split a block of the next larger power of
   ** two in order to create a new free block of size iLogsize.
   */
-  for(iBin=iLogsize; mem5.aiFreelist[iBin]<0 && iBin<=LOGMAX; iBin++){}
+  for(iBin=iLogsize; iBin<=LOGMAX && mem5.aiFreelist[iBin]<0; iBin++){}
   if( iBin>LOGMAX ){
     testcase( sqlite3GlobalConfig.xLog!=0 );
     sqlite3_log(SQLITE_NOMEM, "failed to allocate %u bytes", nByte);
@@ -18266,7 +18454,7 @@ SQLITE_PRIVATE int sqlite3MutexEnd(void){
 */
 SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int id){
 #ifndef SQLITE_OMIT_AUTOINIT
-  if( sqlite3_initialize() ) return 0;
+  if( id<=SQLITE_MUTEX_RECURSIVE && sqlite3_initialize() ) return 0;
 #endif
   return sqlite3GlobalConfig.mutex.xMutexAlloc(id);
 }
@@ -18447,7 +18635,7 @@ static int debugMutexEnd(void){ return SQLITE_OK; }
 ** that means that a mutex could not be allocated. 
 */
 static sqlite3_mutex *debugMutexAlloc(int id){
-  static sqlite3_debug_mutex aStatic[6];
+  static sqlite3_debug_mutex aStatic[SQLITE_MUTEX_STATIC_APP3 - 1];
   sqlite3_debug_mutex *pNew = 0;
   switch( id ){
     case SQLITE_MUTEX_FAST:
@@ -18644,10 +18832,13 @@ static int pthreadMutexEnd(void){ return SQLITE_OK; }
 ** <li>  SQLITE_MUTEX_RECURSIVE
 ** <li>  SQLITE_MUTEX_STATIC_MASTER
 ** <li>  SQLITE_MUTEX_STATIC_MEM
-** <li>  SQLITE_MUTEX_STATIC_MEM2
+** <li>  SQLITE_MUTEX_STATIC_OPEN
 ** <li>  SQLITE_MUTEX_STATIC_PRNG
 ** <li>  SQLITE_MUTEX_STATIC_LRU
 ** <li>  SQLITE_MUTEX_STATIC_PMEM
+** <li>  SQLITE_MUTEX_STATIC_APP1
+** <li>  SQLITE_MUTEX_STATIC_APP2
+** <li>  SQLITE_MUTEX_STATIC_APP3
 ** </ul>
 **
 ** The first two constants cause sqlite3_mutex_alloc() to create
@@ -18681,6 +18872,9 @@ static sqlite3_mutex *pthreadMutexAlloc(int iType){
     SQLITE3_MUTEX_INITIALIZER,
     SQLITE3_MUTEX_INITIALIZER,
     SQLITE3_MUTEX_INITIALIZER,
+    SQLITE3_MUTEX_INITIALIZER,
+    SQLITE3_MUTEX_INITIALIZER,
+    SQLITE3_MUTEX_INITIALIZER,
     SQLITE3_MUTEX_INITIALIZER
   };
   sqlite3_mutex *p;
@@ -18911,12 +19105,303 @@ SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
 **    May you share freely, never taking more than you give.
 **
 *************************************************************************
-** This file contains the C functions that implement mutexes for win32
+** This file contains the C functions that implement mutexes for Win32.
+*/
+
+#if SQLITE_OS_WIN
+/*
+** Include code that is common to all os_*.c files
+*/
+/************** Include os_common.h in the middle of mutex_w32.c *************/
+/************** Begin file os_common.h ***************************************/
+/*
+** 2004 May 22
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file contains macros and a little bit of code that is common to
+** all of the platform-specific files (os_*.c) and is #included into those
+** files.
+**
+** This file should be #included by the os_*.c files only.  It is not a
+** general purpose header file.
+*/
+#ifndef _OS_COMMON_H_
+#define _OS_COMMON_H_
+
+/*
+** At least two bugs have slipped in because we changed the MEMORY_DEBUG
+** macro to SQLITE_DEBUG and some older makefiles have not yet made the
+** switch.  The following code should catch this problem at compile-time.
+*/
+#ifdef MEMORY_DEBUG
+# error "The MEMORY_DEBUG macro is obsolete.  Use SQLITE_DEBUG instead."
+#endif
+
+#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
+# ifndef SQLITE_DEBUG_OS_TRACE
+#   define SQLITE_DEBUG_OS_TRACE 0
+# endif
+  int sqlite3OSTrace = SQLITE_DEBUG_OS_TRACE;
+# define OSTRACE(X)          if( sqlite3OSTrace ) sqlite3DebugPrintf X
+#else
+# define OSTRACE(X)
+#endif
+
+/*
+** Macros for performance tracing.  Normally turned off.  Only works
+** on i486 hardware.
+*/
+#ifdef SQLITE_PERFORMANCE_TRACE
+
+/* 
+** hwtime.h contains inline assembler code for implementing 
+** high-performance timing routines.
+*/
+/************** Include hwtime.h in the middle of os_common.h ****************/
+/************** Begin file hwtime.h ******************************************/
+/*
+** 2008 May 27
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file contains inline asm code for retrieving "high-performance"
+** counters for x86 class CPUs.
+*/
+#ifndef _HWTIME_H_
+#define _HWTIME_H_
+
+/*
+** The following routine only works on pentium-class (or newer) processors.
+** It uses the RDTSC opcode to read the cycle count value out of the
+** processor and returns that value.  This can be used for high-res
+** profiling.
+*/
+#if (defined(__GNUC__) || defined(_MSC_VER)) && \
+      (defined(i386) || defined(__i386__) || defined(_M_IX86))
+
+  #if defined(__GNUC__)
+
+  __inline__ sqlite_uint64 sqlite3Hwtime(void){
+     unsigned int lo, hi;
+     __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+     return (sqlite_uint64)hi << 32 | lo;
+  }
+
+  #elif defined(_MSC_VER)
+
+  __declspec(naked) __inline sqlite_uint64 __cdecl sqlite3Hwtime(void){
+     __asm {
+        rdtsc
+        ret       ; return value at EDX:EAX
+     }
+  }
+
+  #endif
+
+#elif (defined(__GNUC__) && defined(__x86_64__))
+
+  __inline__ sqlite_uint64 sqlite3Hwtime(void){
+      unsigned long val;
+      __asm__ __volatile__ ("rdtsc" : "=A" (val));
+      return val;
+  }
+ 
+#elif (defined(__GNUC__) && defined(__ppc__))
+
+  __inline__ sqlite_uint64 sqlite3Hwtime(void){
+      unsigned long long retval;
+      unsigned long junk;
+      __asm__ __volatile__ ("\n\
+          1:      mftbu   %1\n\
+                  mftb    %L0\n\
+                  mftbu   %0\n\
+                  cmpw    %0,%1\n\
+                  bne     1b"
+                  : "=r" (retval), "=r" (junk));
+      return retval;
+  }
+
+#else
+
+  #error Need implementation of sqlite3Hwtime() for your platform.
+
+  /*
+  ** To compile without implementing sqlite3Hwtime() for your platform,
+  ** you can remove the above #error and use the following
+  ** stub function.  You will lose timing support for many
+  ** of the debugging and testing utilities, but it should at
+  ** least compile and run.
+  */
+SQLITE_PRIVATE   sqlite_uint64 sqlite3Hwtime(void){ return ((sqlite_uint64)0); }
+
+#endif
+
+#endif /* !defined(_HWTIME_H_) */
+
+/************** End of hwtime.h **********************************************/
+/************** Continuing where we left off in os_common.h ******************/
+
+static sqlite_uint64 g_start;
+static sqlite_uint64 g_elapsed;
+#define TIMER_START       g_start=sqlite3Hwtime()
+#define TIMER_END         g_elapsed=sqlite3Hwtime()-g_start
+#define TIMER_ELAPSED     g_elapsed
+#else
+#define TIMER_START
+#define TIMER_END
+#define TIMER_ELAPSED     ((sqlite_uint64)0)
+#endif
+
+/*
+** If we compile with the SQLITE_TEST macro set, then the following block
+** of code will give us the ability to simulate a disk I/O error.  This
+** is used for testing the I/O recovery logic.
+*/
+#ifdef SQLITE_TEST
+SQLITE_API int sqlite3_io_error_hit = 0;            /* Total number of I/O Errors */
+SQLITE_API int sqlite3_io_error_hardhit = 0;        /* Number of non-benign errors */
+SQLITE_API int sqlite3_io_error_pending = 0;        /* Count down to first I/O error */
+SQLITE_API int sqlite3_io_error_persist = 0;        /* True if I/O errors persist */
+SQLITE_API int sqlite3_io_error_benign = 0;         /* True if errors are benign */
+SQLITE_API int sqlite3_diskfull_pending = 0;
+SQLITE_API int sqlite3_diskfull = 0;
+#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X)
+#define SimulateIOError(CODE)  \
+  if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \
+       || sqlite3_io_error_pending-- == 1 )  \
+              { local_ioerr(); CODE; }
+static void local_ioerr(){
+  IOTRACE(("IOERR\n"));
+  sqlite3_io_error_hit++;
+  if( !sqlite3_io_error_benign ) sqlite3_io_error_hardhit++;
+}
+#define SimulateDiskfullError(CODE) \
+   if( sqlite3_diskfull_pending ){ \
+     if( sqlite3_diskfull_pending == 1 ){ \
+       local_ioerr(); \
+       sqlite3_diskfull = 1; \
+       sqlite3_io_error_hit = 1; \
+       CODE; \
+     }else{ \
+       sqlite3_diskfull_pending--; \
+     } \
+   }
+#else
+#define SimulateIOErrorBenign(X)
+#define SimulateIOError(A)
+#define SimulateDiskfullError(A)
+#endif
+
+/*
+** When testing, keep a count of the number of open files.
+*/
+#ifdef SQLITE_TEST
+SQLITE_API int sqlite3_open_file_count = 0;
+#define OpenCounter(X)  sqlite3_open_file_count+=(X)
+#else
+#define OpenCounter(X)
+#endif
+
+#endif /* !defined(_OS_COMMON_H_) */
+
+/************** End of os_common.h *******************************************/
+/************** Continuing where we left off in mutex_w32.c ******************/
+
+/*
+** Include the header file for the Windows VFS.
+*/
+/************** Include os_win.h in the middle of mutex_w32.c ****************/
+/************** Begin file os_win.h ******************************************/
+/*
+** 2013 November 25
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file contains code that is specific to Windows.
 */
+#ifndef _OS_WIN_H_
+#define _OS_WIN_H_
+
+/*
+** Include the primary Windows SDK header file.
+*/
+#include "windows.h"
+
+#ifdef __CYGWIN__
+# include <sys/cygwin.h>
+# include <errno.h> /* amalgamator: dontcache */
+#endif
+
+/*
+** Determine if we are dealing with Windows NT.
+**
+** We ought to be able to determine if we are compiling for Windows 9x or
+** Windows NT using the _WIN32_WINNT macro as follows:
+**
+** #if defined(_WIN32_WINNT)
+** # define SQLITE_OS_WINNT 1
+** #else
+** # define SQLITE_OS_WINNT 0
+** #endif
+**
+** However, Visual Studio 2005 does not set _WIN32_WINNT by default, as
+** it ought to, so the above test does not work.  We'll just assume that
+** everything is Windows NT unless the programmer explicitly says otherwise
+** by setting SQLITE_OS_WINNT to 0.
+*/
+#if SQLITE_OS_WIN && !defined(SQLITE_OS_WINNT)
+# define SQLITE_OS_WINNT 1
+#endif
+
+/*
+** Determine if we are dealing with Windows CE - which has a much reduced
+** API.
+*/
+#if defined(_WIN32_WCE)
+# define SQLITE_OS_WINCE 1
+#else
+# define SQLITE_OS_WINCE 0
+#endif
+
+/*
+** Determine if we are dealing with WinRT, which provides only a subset of
+** the full Win32 API.
+*/
+#if !defined(SQLITE_OS_WINRT)
+# define SQLITE_OS_WINRT 0
+#endif
+
+#endif /* _OS_WIN_H_ */
+
+/************** End of os_win.h **********************************************/
+/************** Continuing where we left off in mutex_w32.c ******************/
+#endif
 
 /*
 ** The code in this file is only used if we are compiling multithreaded
-** on a win32 system.
+** on a Win32 system.
 */
 #ifdef SQLITE_MUTEX_W32
 
@@ -18929,48 +19414,22 @@ struct sqlite3_mutex {
 #ifdef SQLITE_DEBUG
   volatile int nRef;         /* Number of enterances */
   volatile DWORD owner;      /* Thread holding this mutex */
-  int trace;                 /* True to trace changes */
+  volatile int trace;        /* True to trace changes */
 #endif
 };
-#define SQLITE_W32_MUTEX_INITIALIZER { 0 }
-#ifdef SQLITE_DEBUG
-#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, 0L, (DWORD)0, 0 }
-#else
-#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 }
-#endif
 
 /*
-** Return true (non-zero) if we are running under WinNT, Win2K, WinXP,
-** or WinCE.  Return false (zero) for Win95, Win98, or WinME.
-**
-** Here is an interesting observation:  Win95, Win98, and WinME lack
-** the LockFileEx() API.  But we can still statically link against that
-** API as long as we don't call it win running Win95/98/ME.  A call to
-** this routine is used to determine if the host is Win95/98/ME or
-** WinNT/2K/XP so that we will know whether or not we can safely call
-** the LockFileEx() API.
-**
-** mutexIsNT() is only used for the TryEnterCriticalSection() API call,
-** which is only available if your application was compiled with 
-** _WIN32_WINNT defined to a value >= 0x0400.  Currently, the only
-** call to TryEnterCriticalSection() is #ifdef'ed out, so #ifdef 
-** this out as well.
+** These are the initializer values used when declaring a "static" mutex
+** on Win32.  It should be noted that all mutexes require initialization
+** on the Win32 platform.
 */
-#if 0
-#if SQLITE_OS_WINCE || SQLITE_OS_WINRT
-# define mutexIsNT()  (1)
+#define SQLITE_W32_MUTEX_INITIALIZER { 0 }
+
+#ifdef SQLITE_DEBUG
+#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, \
+                                    0L, (DWORD)0, 0 }
 #else
-  static int mutexIsNT(void){
-    static int osType = 0;
-    if( osType==0 ){
-      OSVERSIONINFO sInfo;
-      sInfo.dwOSVersionInfoSize = sizeof(sInfo);
-      GetVersionEx(&sInfo);
-      osType = sInfo.dwPlatformId==VER_PLATFORM_WIN32_NT ? 2 : 1;
-    }
-    return osType==2;
-  }
-#endif /* SQLITE_OS_WINCE || SQLITE_OS_WINRT */
+#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 }
 #endif
 
 #ifdef SQLITE_DEBUG
@@ -18981,20 +19440,24 @@ struct sqlite3_mutex {
 static int winMutexHeld(sqlite3_mutex *p){
   return p->nRef!=0 && p->owner==GetCurrentThreadId();
 }
+
 static int winMutexNotheld2(sqlite3_mutex *p, DWORD tid){
   return p->nRef==0 || p->owner!=tid;
 }
+
 static int winMutexNotheld(sqlite3_mutex *p){
-  DWORD tid = GetCurrentThreadId(); 
+  DWORD tid = GetCurrentThreadId();
   return winMutexNotheld2(p, tid);
 }
 #endif
 
-
 /*
 ** Initialize and deinitialize the mutex subsystem.
 */
-static sqlite3_mutex winMutex_staticMutexes[6] = {
+static sqlite3_mutex winMutex_staticMutexes[] = {
+  SQLITE3_MUTEX_INITIALIZER,
+  SQLITE3_MUTEX_INITIALIZER,
+  SQLITE3_MUTEX_INITIALIZER,
   SQLITE3_MUTEX_INITIALIZER,
   SQLITE3_MUTEX_INITIALIZER,
   SQLITE3_MUTEX_INITIALIZER,
@@ -19002,17 +19465,20 @@ static sqlite3_mutex winMutex_staticMutexes[6] = {
   SQLITE3_MUTEX_INITIALIZER,
   SQLITE3_MUTEX_INITIALIZER
 };
+
 static int winMutex_isInit = 0;
-/* As winMutexInit() and winMutexEnd() are called as part
-** of the sqlite3_initialize and sqlite3_shutdown()
-** processing, the "interlocked" magic is probably not
-** strictly necessary.
+static int winMutex_isNt = -1; /* <0 means "need to query" */
+
+/* As the winMutexInit() and winMutexEnd() functions are called as part
+** of the sqlite3_initialize() and sqlite3_shutdown() processing, the
+** "interlocked" magic used here is probably not strictly necessary.
 */
-static LONG winMutex_lock = 0;
+static LONG volatile winMutex_lock = 0;
 
+SQLITE_API int sqlite3_win32_is_nt(void); /* os_win.c */
 SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
 
-static int winMutexInit(void){ 
+static int winMutexInit(void){
   /* The first to increment to 1 does actual initialization */
   if( InterlockedCompareExchange(&winMutex_lock, 1, 0)==0 ){
     int i;
@@ -19025,16 +19491,17 @@ static int winMutexInit(void){
     }
     winMutex_isInit = 1;
   }else{
-    /* Someone else is in the process of initing the static mutexes */
+    /* Another thread is (in the process of) initializing the static
+    ** mutexes */
     while( !winMutex_isInit ){
       sqlite3_win32_sleep(1);
     }
   }
-  return SQLITE_OK; 
+  return SQLITE_OK;
 }
 
-static int winMutexEnd(void){ 
-  /* The first to decrement to 0 does actual shutdown 
+static int winMutexEnd(void){
+  /* The first to decrement to 0 does actual shutdown
   ** (which should be the last to shutdown.) */
   if( InterlockedCompareExchange(&winMutex_lock, 0, 1)==1 ){
     if( winMutex_isInit==1 ){
@@ -19045,7 +19512,7 @@ static int winMutexEnd(void){
       winMutex_isInit = 0;
     }
   }
-  return SQLITE_OK; 
+  return SQLITE_OK;
 }
 
 /*
@@ -19060,10 +19527,13 @@ static int winMutexEnd(void){
 ** <li>  SQLITE_MUTEX_RECURSIVE
 ** <li>  SQLITE_MUTEX_STATIC_MASTER
 ** <li>  SQLITE_MUTEX_STATIC_MEM
-** <li>  SQLITE_MUTEX_STATIC_MEM2
+** <li>  SQLITE_MUTEX_STATIC_OPEN
 ** <li>  SQLITE_MUTEX_STATIC_PRNG
 ** <li>  SQLITE_MUTEX_STATIC_LRU
 ** <li>  SQLITE_MUTEX_STATIC_PMEM
+** <li>  SQLITE_MUTEX_STATIC_APP1
+** <li>  SQLITE_MUTEX_STATIC_APP2
+** <li>  SQLITE_MUTEX_STATIC_APP3
 ** </ul>
 **
 ** The first two constants cause sqlite3_mutex_alloc() to create
@@ -19086,7 +19556,7 @@ static int winMutexEnd(void){
 **
 ** Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
 ** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
-** returns a different mutex on every call.  But for the static 
+** returns a different mutex on every call.  But for the static
 ** mutex types, the same mutex is returned on every call that has
 ** the same type number.
 */
@@ -19097,9 +19567,12 @@ static sqlite3_mutex *winMutexAlloc(int iType){
     case SQLITE_MUTEX_FAST:
     case SQLITE_MUTEX_RECURSIVE: {
       p = sqlite3MallocZero( sizeof(*p) );
-      if( p ){  
+      if( p ){
 #ifdef SQLITE_DEBUG
         p->id = iType;
+#ifdef SQLITE_WIN32_MUTEX_TRACE_DYNAMIC
+        p->trace = 1;
+#endif
 #endif
 #if SQLITE_OS_WINRT
         InitializeCriticalSectionEx(&p->mutex, 0, 0);
@@ -19110,12 +19583,15 @@ static sqlite3_mutex *winMutexAlloc(int iType){
       break;
     }
     default: {
-      assert( winMutex_isInit==1 );
       assert( iType-2 >= 0 );
       assert( iType-2 < ArraySize(winMutex_staticMutexes) );
+      assert( winMutex_isInit==1 );
       p = &winMutex_staticMutexes[iType-2];
 #ifdef SQLITE_DEBUG
       p->id = iType;
+#ifdef SQLITE_WIN32_MUTEX_TRACE_STATIC
+      p->trace = 1;
+#endif
 #endif
       break;
     }
@@ -19131,8 +19607,11 @@ static sqlite3_mutex *winMutexAlloc(int iType){
 */
 static void winMutexFree(sqlite3_mutex *p){
   assert( p );
+#ifdef SQLITE_DEBUG
   assert( p->nRef==0 && p->owner==0 );
   assert( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE );
+#endif
+  assert( winMutex_isInit==1 );
   DeleteCriticalSection(&p->mutex);
   sqlite3_free(p);
 }
@@ -19149,30 +19628,39 @@ static void winMutexFree(sqlite3_mutex *p){
 ** more than once, the behavior is undefined.
 */
 static void winMutexEnter(sqlite3_mutex *p){
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
+  DWORD tid = GetCurrentThreadId();
+#endif
 #ifdef SQLITE_DEBUG
-  DWORD tid = GetCurrentThreadId(); 
+  assert( p );
   assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) );
+#else
+  assert( p );
 #endif
+  assert( winMutex_isInit==1 );
   EnterCriticalSection(&p->mutex);
 #ifdef SQLITE_DEBUG
   assert( p->nRef>0 || p->owner==0 );
-  p->owner = tid; 
+  p->owner = tid;
   p->nRef++;
   if( p->trace ){
-    printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
+    OSTRACE(("ENTER-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n",
+             tid, p, p->trace, p->nRef));
   }
 #endif
 }
+
 static int winMutexTry(sqlite3_mutex *p){
-#ifndef NDEBUG
-  DWORD tid = GetCurrentThreadId(); 
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
+  DWORD tid = GetCurrentThreadId();
 #endif
   int rc = SQLITE_BUSY;
+  assert( p );
   assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) );
   /*
   ** The sqlite3_mutex_try() routine is very rarely used, and when it
   ** is used it is merely an optimization.  So it is OK for it to always
-  ** fail.  
+  ** fail.
   **
   ** The TryEnterCriticalSection() interface is only available on WinNT.
   ** And some windows compilers complain if you try to use it without
@@ -19180,18 +19668,27 @@ static int winMutexTry(sqlite3_mutex *p){
   ** For that reason, we will omit this optimization for now.  See
   ** ticket #2685.
   */
-#if 0
-  if( mutexIsNT() && TryEnterCriticalSection(&p->mutex) ){
+#if defined(_WIN32_WINNT) && _WIN32_WINNT >= 0x0400
+  assert( winMutex_isInit==1 );
+  assert( winMutex_isNt>=-1 && winMutex_isNt<=1 );
+  if( winMutex_isNt<0 ){
+    winMutex_isNt = sqlite3_win32_is_nt();
+  }
+  assert( winMutex_isNt==0 || winMutex_isNt==1 );
+  if( winMutex_isNt && TryEnterCriticalSection(&p->mutex) ){
+#ifdef SQLITE_DEBUG
     p->owner = tid;
     p->nRef++;
+#endif
     rc = SQLITE_OK;
   }
 #else
   UNUSED_PARAMETER(p);
 #endif
 #ifdef SQLITE_DEBUG
-  if( rc==SQLITE_OK && p->trace ){
-    printf("try mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
+  if( p->trace ){
+    OSTRACE(("TRY-MUTEX tid=%lu, mutex=%p (%d), owner=%lu, nRef=%d, rc=%s\n",
+             tid, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc)));
   }
 #endif
   return rc;
@@ -19204,18 +19701,23 @@ static int winMutexTry(sqlite3_mutex *p){
 ** is not currently allocated.  SQLite will never do either.
 */
 static void winMutexLeave(sqlite3_mutex *p){
-#ifndef NDEBUG
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
   DWORD tid = GetCurrentThreadId();
+#endif
+  assert( p );
+#ifdef SQLITE_DEBUG
   assert( p->nRef>0 );
   assert( p->owner==tid );
   p->nRef--;
   if( p->nRef==0 ) p->owner = 0;
   assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );
 #endif
+  assert( winMutex_isInit==1 );
   LeaveCriticalSection(&p->mutex);
 #ifdef SQLITE_DEBUG
   if( p->trace ){
-    printf("leave mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
+    OSTRACE(("LEAVE-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n",
+             tid, p, p->trace, p->nRef));
   }
 #endif
 }
@@ -19237,9 +19739,9 @@ SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
     0
 #endif
   };
-
   return &sMutex;
 }
+
 #endif /* SQLITE_MUTEX_W32 */
 
 /************** End of mutex_w32.c *******************************************/
@@ -20166,20 +20668,6 @@ static char et_getdigit(LONGDOUBLE_TYPE *val, int *cnt){
 #endif /* SQLITE_OMIT_FLOATING_POINT */
 
 /*
-** Append N space characters to the given string buffer.
-*/
-SQLITE_PRIVATE void sqlite3AppendSpace(StrAccum *pAccum, int N){
-  static const char zSpaces[] = "                             ";
-  while( N>=(int)sizeof(zSpaces)-1 ){
-    sqlite3StrAccumAppend(pAccum, zSpaces, sizeof(zSpaces)-1);
-    N -= sizeof(zSpaces)-1;
-  }
-  if( N>0 ){
-    sqlite3StrAccumAppend(pAccum, zSpaces, N);
-  }
-}
-
-/*
 ** Set the StrAccum object to an error mode.
 */
 static void setStrAccumError(StrAccum *p, u8 eError){
@@ -20268,11 +20756,9 @@ SQLITE_PRIVATE void sqlite3VXPrintf(
   }
   for(; (c=(*fmt))!=0; ++fmt){
     if( c!='%' ){
-      int amt;
       bufpt = (char *)fmt;
-      amt = 1;
-      while( (c=(*++fmt))!='%' && c!=0 ) amt++;
-      sqlite3StrAccumAppend(pAccum, bufpt, amt);
+      while( (c=(*++fmt))!='%' && c!=0 ){};
+      sqlite3StrAccumAppend(pAccum, bufpt, (int)(fmt - bufpt));
       if( c==0 ) break;
     }
     if( (c=(*++fmt))==0 ){
@@ -20453,10 +20939,8 @@ SQLITE_PRIVATE void sqlite3VXPrintf(
           *(--bufpt) = zOrd[x*2];
         }
         {
-          register const char *cset;      /* Use registers for speed */
-          register int base;
-          cset = &aDigits[infop->charset];
-          base = infop->base;
+          const char *cset = &aDigits[infop->charset];
+          u8 base = infop->base;
           do{                                           /* Convert to ascii */
             *(--bufpt) = cset[longvalue%base];
             longvalue = longvalue/base;
@@ -20760,29 +21244,90 @@ SQLITE_PRIVATE void sqlite3VXPrintf(
     ** "length" characters long.  The field width is "width".  Do
     ** the output.
     */
-    if( !flag_leftjustify ){
-      register int nspace;
-      nspace = width-length;
-      if( nspace>0 ){
-        sqlite3AppendSpace(pAccum, nspace);
-      }
-    }
-    if( length>0 ){
-      sqlite3StrAccumAppend(pAccum, bufpt, length);
-    }
-    if( flag_leftjustify ){
-      register int nspace;
-      nspace = width-length;
-      if( nspace>0 ){
-        sqlite3AppendSpace(pAccum, nspace);
-      }
-    }
+    width -= length;
+    if( width>0 && !flag_leftjustify ) sqlite3AppendSpace(pAccum, width);
+    sqlite3StrAccumAppend(pAccum, bufpt, length);
+    if( width>0 && flag_leftjustify ) sqlite3AppendSpace(pAccum, width);
+
     if( zExtra ) sqlite3_free(zExtra);
   }/* End for loop over the format string */
 } /* End of function */
 
 /*
-** Append N bytes of text from z to the StrAccum object.
+** Enlarge the memory allocation on a StrAccum object so that it is
+** able to accept at least N more bytes of text.
+**
+** Return the number of bytes of text that StrAccum is able to accept
+** after the attempted enlargement.  The value returned might be zero.
+*/
+static int sqlite3StrAccumEnlarge(StrAccum *p, int N){
+  char *zNew;
+  assert( p->nChar+N >= p->nAlloc ); /* Only called if really needed */
+  if( p->accError ){
+    testcase(p->accError==STRACCUM_TOOBIG);
+    testcase(p->accError==STRACCUM_NOMEM);
+    return 0;
+  }
+  if( !p->useMalloc ){
+    N = p->nAlloc - p->nChar - 1;
+    setStrAccumError(p, STRACCUM_TOOBIG);
+    return N;
+  }else{
+    char *zOld = (p->zText==p->zBase ? 0 : p->zText);
+    i64 szNew = p->nChar;
+    szNew += N + 1;
+    if( szNew > p->mxAlloc ){
+      sqlite3StrAccumReset(p);
+      setStrAccumError(p, STRACCUM_TOOBIG);
+      return 0;
+    }else{
+      p->nAlloc = (int)szNew;
+    }
+    if( p->useMalloc==1 ){
+      zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc);
+    }else{
+      zNew = sqlite3_realloc(zOld, p->nAlloc);
+    }
+    if( zNew ){
+      assert( p->zText!=0 || p->nChar==0 );
+      if( zOld==0 && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar);
+      p->zText = zNew;
+    }else{
+      sqlite3StrAccumReset(p);
+      setStrAccumError(p, STRACCUM_NOMEM);
+      return 0;
+    }
+  }
+  return N;
+}
+
+/*
+** Append N space characters to the given string buffer.
+*/
+SQLITE_PRIVATE void sqlite3AppendSpace(StrAccum *p, int N){
+  if( p->nChar+N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ) return;
+  while( (N--)>0 ) p->zText[p->nChar++] = ' ';
+}
+
+/*
+** The StrAccum "p" is not large enough to accept N new bytes of z[].
+** So enlarge if first, then do the append.
+**
+** This is a helper routine to sqlite3StrAccumAppend() that does special-case
+** work (enlarging the buffer) using tail recursion, so that the
+** sqlite3StrAccumAppend() routine can use fast calling semantics.
+*/
+static void enlargeAndAppend(StrAccum *p, const char *z, int N){
+  N = sqlite3StrAccumEnlarge(p, N);
+  if( N>0 ){
+    memcpy(&p->zText[p->nChar], z, N);
+    p->nChar += N;
+  }
+}
+
+/*
+** Append N bytes of text from z to the StrAccum object.  Increase the
+** size of the memory allocation for StrAccum if necessary.
 */
 SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){
   assert( z!=0 );
@@ -20790,43 +21335,8 @@ SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){
   assert( N>=0 );
   assert( p->accError==0 || p->nAlloc==0 );
   if( p->nChar+N >= p->nAlloc ){
-    char *zNew;
-    if( p->accError ){
-      testcase(p->accError==STRACCUM_TOOBIG);
-      testcase(p->accError==STRACCUM_NOMEM);
-      return;
-    }
-    if( !p->useMalloc ){
-      N = p->nAlloc - p->nChar - 1;
-      setStrAccumError(p, STRACCUM_TOOBIG);
-      if( N<=0 ){
-        return;
-      }
-    }else{
-      char *zOld = (p->zText==p->zBase ? 0 : p->zText);
-      i64 szNew = p->nChar;
-      szNew += N + 1;
-      if( szNew > p->mxAlloc ){
-        sqlite3StrAccumReset(p);
-        setStrAccumError(p, STRACCUM_TOOBIG);
-        return;
-      }else{
-        p->nAlloc = (int)szNew;
-      }
-      if( p->useMalloc==1 ){
-        zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc);
-      }else{
-        zNew = sqlite3_realloc(zOld, p->nAlloc);
-      }
-      if( zNew ){
-        if( zOld==0 && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar);
-        p->zText = zNew;
-      }else{
-        sqlite3StrAccumReset(p);
-        setStrAccumError(p, STRACCUM_NOMEM);
-        return;
-      }
-    }
+    enlargeAndAppend(p,z,N);
+    return;
   }
   assert( p->zText );
   memcpy(&p->zText[p->nChar], z, N);
@@ -21348,8 +21858,8 @@ static const unsigned char sqlite3Utf8Trans1[] = {
 **     and rendered as themselves even though they are technically
 **     invalid characters.
 **
-**  *  This routine accepts an infinite number of different UTF8 encodings
-**     for unicode values 0x80 and greater.  It do not change over-length
+**  *  This routine accepts over-length UTF8 encodings
+**     for unicode values 0x80 and greater.  It does not change over-length
 **     encodings to 0xfffd as some systems recommend.
 */
 #define READ_UTF8(zIn, zTerm, c)                           \
@@ -21762,6 +22272,24 @@ SQLITE_PRIVATE void sqlite3Coverage(int x){
 }
 #endif
 
+/*
+** Give a callback to the test harness that can be used to simulate faults
+** in places where it is difficult or expensive to do so purely by means
+** of inputs.
+**
+** The intent of the integer argument is to let the fault simulator know
+** which of multiple sqlite3FaultSim() calls has been hit.
+**
+** Return whatever integer value the test callback returns, or return
+** SQLITE_OK if no test callback is installed.
+*/
+#ifndef SQLITE_OMIT_BUILTIN_TEST
+SQLITE_PRIVATE int sqlite3FaultSim(int iTest){
+  int (*xCallback)(int) = sqlite3GlobalConfig.xTestCallback;
+  return xCallback ? xCallback(iTest) : SQLITE_OK;
+}
+#endif
+
 #ifndef SQLITE_OMIT_FLOATING_POINT
 /*
 ** Return true if the floating point value is Not a Number (NaN).
@@ -22188,9 +22716,9 @@ static int compare2pow63(const char *zNum, int incr){
   return c;
 }
 
-
 /*
-** Convert zNum to a 64-bit signed integer.
+** Convert zNum to a 64-bit signed integer.  zNum must be decimal. This
+** routine does *not* accept hexadecimal notation.
 **
 ** If the zNum value is representable as a 64-bit twos-complement 
 ** integer, then write that value into *pNum and return 0.
@@ -22279,9 +22807,43 @@ SQLITE_PRIVATE int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc
 }
 
 /*
+** Transform a UTF-8 integer literal, in either decimal or hexadecimal,
+** into a 64-bit signed integer.  This routine accepts hexadecimal literals,
+** whereas sqlite3Atoi64() does not.
+**
+** Returns:
+**
+**     0    Successful transformation.  Fits in a 64-bit signed integer.
+**     1    Integer too large for a 64-bit signed integer or is malformed
+**     2    Special case of 9223372036854775808
+*/
+SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){
+#ifndef SQLITE_OMIT_HEX_INTEGER
+  if( z[0]=='0'
+   && (z[1]=='x' || z[1]=='X')
+   && sqlite3Isxdigit(z[2])
+  ){
+    u64 u = 0;
+    int i, k;
+    for(i=2; z[i]=='0'; i++){}
+    for(k=i; sqlite3Isxdigit(z[k]); k++){
+      u = u*16 + sqlite3HexToInt(z[k]);
+    }
+    memcpy(pOut, &u, 8);
+    return (z[k]==0 && k-i<=16) ? 0 : 1;
+  }else
+#endif /* SQLITE_OMIT_HEX_INTEGER */
+  {
+    return sqlite3Atoi64(z, pOut, sqlite3Strlen30(z), SQLITE_UTF8);
+  }
+}
+
+/*
 ** If zNum represents an integer that will fit in 32-bits, then set
 ** *pValue to that integer and return true.  Otherwise return false.
 **
+** This routine accepts both decimal and hexadecimal notation for integers.
+**
 ** Any non-numeric characters that following zNum are ignored.
 ** This is different from sqlite3Atoi64() which requires the
 ** input number to be zero-terminated.
@@ -22296,7 +22858,25 @@ SQLITE_PRIVATE int sqlite3GetInt32(const char *zNum, int *pValue){
   }else if( zNum[0]=='+' ){
     zNum++;
   }
-  while( zNum[0]=='0' ) zNum++;
+#ifndef SQLITE_OMIT_HEX_INTEGER
+  else if( zNum[0]=='0'
+        && (zNum[1]=='x' || zNum[1]=='X')
+        && sqlite3Isxdigit(zNum[2])
+  ){
+    u32 u = 0;
+    zNum += 2;
+    while( zNum[0]=='0' ) zNum++;
+    for(i=0; sqlite3Isxdigit(zNum[i]) && i<8; i++){
+      u = u*16 + sqlite3HexToInt(zNum[i]);
+    }
+    if( (u&0x80000000)==0 && sqlite3Isxdigit(zNum[i])==0 ){
+      memcpy(pValue, &u, 4);
+      return 1;
+    }else{
+      return 0;
+    }
+  }
+#endif
   for(i=0; i<11 && (c = zNum[i] - '0')>=0 && c<=9; i++){
     v = v*10 + c;
   }
@@ -22977,8 +23557,8 @@ SQLITE_PRIVATE LogEst sqlite3LogEstAdd(LogEst a, LogEst b){
 }
 
 /*
-** Convert an integer into a LogEst.  In other words, compute a
-** good approximatation for 10*log2(x).
+** Convert an integer into a LogEst.  In other words, compute an
+** approximation for 10*log2(x).
 */
 SQLITE_PRIVATE LogEst sqlite3LogEst(u64 x){
   static LogEst a[] = { 0, 2, 3, 5, 6, 7, 8, 9 };
@@ -23334,7 +23914,7 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
      /*  11 */ "Checkpoint"       OpHelp(""),
      /*  12 */ "JournalMode"      OpHelp(""),
      /*  13 */ "Vacuum"           OpHelp(""),
-     /*  14 */ "VFilter"          OpHelp("iPlan=r[P3] zPlan='P4'"),
+     /*  14 */ "VFilter"          OpHelp("iplan=r[P3] zplan='P4'"),
      /*  15 */ "VUpdate"          OpHelp("data=r[P3@P2]"),
      /*  16 */ "Goto"             OpHelp(""),
      /*  17 */ "Gosub"            OpHelp(""),
@@ -23361,7 +23941,7 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
      /*  38 */ "MustBeInt"        OpHelp(""),
      /*  39 */ "RealAffinity"     OpHelp(""),
      /*  40 */ "Permutation"      OpHelp(""),
-     /*  41 */ "Compare"          OpHelp(""),
+     /*  41 */ "Compare"          OpHelp("r[P1@P3] <-> r[P2@P3]"),
      /*  42 */ "Jump"             OpHelp(""),
      /*  43 */ "Once"             OpHelp(""),
      /*  44 */ "If"               OpHelp(""),
@@ -23372,30 +23952,30 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
      /*  49 */ "Count"            OpHelp("r[P2]=count()"),
      /*  50 */ "ReadCookie"       OpHelp(""),
      /*  51 */ "SetCookie"        OpHelp(""),
-     /*  52 */ "OpenRead"         OpHelp("root=P2 iDb=P3"),
-     /*  53 */ "OpenWrite"        OpHelp("root=P2 iDb=P3"),
-     /*  54 */ "OpenAutoindex"    OpHelp("nColumn=P2"),
-     /*  55 */ "OpenEphemeral"    OpHelp("nColumn=P2"),
-     /*  56 */ "SorterOpen"       OpHelp(""),
-     /*  57 */ "OpenPseudo"       OpHelp("P3 columns in r[P2]"),
-     /*  58 */ "Close"            OpHelp(""),
-     /*  59 */ "SeekLT"           OpHelp(""),
-     /*  60 */ "SeekLE"           OpHelp(""),
-     /*  61 */ "SeekGE"           OpHelp(""),
-     /*  62 */ "SeekGT"           OpHelp(""),
-     /*  63 */ "Seek"             OpHelp("intkey=r[P2]"),
-     /*  64 */ "NoConflict"       OpHelp("key=r[P3@P4]"),
-     /*  65 */ "NotFound"         OpHelp("key=r[P3@P4]"),
-     /*  66 */ "Found"            OpHelp("key=r[P3@P4]"),
-     /*  67 */ "NotExists"        OpHelp("intkey=r[P3]"),
-     /*  68 */ "Sequence"         OpHelp("r[P2]=rowid"),
-     /*  69 */ "NewRowid"         OpHelp("r[P2]=rowid"),
-     /*  70 */ "Insert"           OpHelp("intkey=r[P3] data=r[P2]"),
+     /*  52 */ "ReopenIdx"        OpHelp("root=P2 iDb=P3"),
+     /*  53 */ "OpenRead"         OpHelp("root=P2 iDb=P3"),
+     /*  54 */ "OpenWrite"        OpHelp("root=P2 iDb=P3"),
+     /*  55 */ "OpenAutoindex"    OpHelp("nColumn=P2"),
+     /*  56 */ "OpenEphemeral"    OpHelp("nColumn=P2"),
+     /*  57 */ "SorterOpen"       OpHelp(""),
+     /*  58 */ "OpenPseudo"       OpHelp("P3 columns in r[P2]"),
+     /*  59 */ "Close"            OpHelp(""),
+     /*  60 */ "SeekLT"           OpHelp("key=r[P3@P4]"),
+     /*  61 */ "SeekLE"           OpHelp("key=r[P3@P4]"),
+     /*  62 */ "SeekGE"           OpHelp("key=r[P3@P4]"),
+     /*  63 */ "SeekGT"           OpHelp("key=r[P3@P4]"),
+     /*  64 */ "Seek"             OpHelp("intkey=r[P2]"),
+     /*  65 */ "NoConflict"       OpHelp("key=r[P3@P4]"),
+     /*  66 */ "NotFound"         OpHelp("key=r[P3@P4]"),
+     /*  67 */ "Found"            OpHelp("key=r[P3@P4]"),
+     /*  68 */ "NotExists"        OpHelp("intkey=r[P3]"),
+     /*  69 */ "Sequence"         OpHelp("r[P2]=cursor[P1].ctr++"),
+     /*  70 */ "NewRowid"         OpHelp("r[P2]=rowid"),
      /*  71 */ "Or"               OpHelp("r[P3]=(r[P1] || r[P2])"),
      /*  72 */ "And"              OpHelp("r[P3]=(r[P1] && r[P2])"),
-     /*  73 */ "InsertInt"        OpHelp("intkey=P3 data=r[P2]"),
-     /*  74 */ "Delete"           OpHelp(""),
-     /*  75 */ "ResetCount"       OpHelp(""),
+     /*  73 */ "Insert"           OpHelp("intkey=r[P3] data=r[P2]"),
+     /*  74 */ "InsertInt"        OpHelp("intkey=P3 data=r[P2]"),
+     /*  75 */ "Delete"           OpHelp(""),
      /*  76 */ "IsNull"           OpHelp("if r[P1]==NULL goto P2"),
      /*  77 */ "NotNull"          OpHelp("if r[P1]!=NULL goto P2"),
      /*  78 */ "Ne"               OpHelp("if r[P1]!=r[P3] goto P2"),
@@ -23404,7 +23984,7 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
      /*  81 */ "Le"               OpHelp("if r[P1]<=r[P3] goto P2"),
      /*  82 */ "Lt"               OpHelp("if r[P1]<r[P3] goto P2"),
      /*  83 */ "Ge"               OpHelp("if r[P1]>=r[P3] goto P2"),
-     /*  84 */ "SorterCompare"    OpHelp("if key(P1)!=rtrim(r[P3],P4) goto P2"),
+     /*  84 */ "ResetCount"       OpHelp(""),
      /*  85 */ "BitAnd"           OpHelp("r[P3]=r[P1]&r[P2]"),
      /*  86 */ "BitOr"            OpHelp("r[P3]=r[P1]|r[P2]"),
      /*  87 */ "ShiftLeft"        OpHelp("r[P3]=r[P2]<<r[P1]"),
@@ -23415,68 +23995,70 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
      /*  92 */ "Divide"           OpHelp("r[P3]=r[P2]/r[P1]"),
      /*  93 */ "Remainder"        OpHelp("r[P3]=r[P2]%r[P1]"),
      /*  94 */ "Concat"           OpHelp("r[P3]=r[P2]+r[P1]"),
-     /*  95 */ "SorterData"       OpHelp("r[P2]=data"),
+     /*  95 */ "SorterCompare"    OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"),
      /*  96 */ "BitNot"           OpHelp("r[P1]= ~r[P1]"),
      /*  97 */ "String8"          OpHelp("r[P2]='P4'"),
-     /*  98 */ "RowKey"           OpHelp("r[P2]=key"),
-     /*  99 */ "RowData"          OpHelp("r[P2]=data"),
-     /* 100 */ "Rowid"            OpHelp("r[P2]=rowid"),
-     /* 101 */ "NullRow"          OpHelp(""),
-     /* 102 */ "Last"             OpHelp(""),
-     /* 103 */ "SorterSort"       OpHelp(""),
-     /* 104 */ "Sort"             OpHelp(""),
-     /* 105 */ "Rewind"           OpHelp(""),
-     /* 106 */ "SorterInsert"     OpHelp(""),
-     /* 107 */ "IdxInsert"        OpHelp("key=r[P2]"),
-     /* 108 */ "IdxDelete"        OpHelp("key=r[P2@P3]"),
-     /* 109 */ "IdxRowid"         OpHelp("r[P2]=rowid"),
-     /* 110 */ "IdxLE"            OpHelp("key=r[P3@P4]"),
-     /* 111 */ "IdxGT"            OpHelp("key=r[P3@P4]"),
-     /* 112 */ "IdxLT"            OpHelp("key=r[P3@P4]"),
-     /* 113 */ "IdxGE"            OpHelp("key=r[P3@P4]"),
-     /* 114 */ "Destroy"          OpHelp(""),
-     /* 115 */ "Clear"            OpHelp(""),
-     /* 116 */ "CreateIndex"      OpHelp("r[P2]=root iDb=P1"),
-     /* 117 */ "CreateTable"      OpHelp("r[P2]=root iDb=P1"),
-     /* 118 */ "ParseSchema"      OpHelp(""),
-     /* 119 */ "LoadAnalysis"     OpHelp(""),
-     /* 120 */ "DropTable"        OpHelp(""),
-     /* 121 */ "DropIndex"        OpHelp(""),
-     /* 122 */ "DropTrigger"      OpHelp(""),
-     /* 123 */ "IntegrityCk"      OpHelp(""),
-     /* 124 */ "RowSetAdd"        OpHelp("rowset(P1)=r[P2]"),
-     /* 125 */ "RowSetRead"       OpHelp("r[P3]=rowset(P1)"),
-     /* 126 */ "RowSetTest"       OpHelp("if r[P3] in rowset(P1) goto P2"),
-     /* 127 */ "Program"          OpHelp(""),
-     /* 128 */ "Param"            OpHelp(""),
-     /* 129 */ "FkCounter"        OpHelp("fkctr[P1]+=P2"),
-     /* 130 */ "FkIfZero"         OpHelp("if fkctr[P1]==0 goto P2"),
-     /* 131 */ "MemMax"           OpHelp("r[P1]=max(r[P1],r[P2])"),
-     /* 132 */ "IfPos"            OpHelp("if r[P1]>0 goto P2"),
+     /*  98 */ "SorterData"       OpHelp("r[P2]=data"),
+     /*  99 */ "RowKey"           OpHelp("r[P2]=key"),
+     /* 100 */ "RowData"          OpHelp("r[P2]=data"),
+     /* 101 */ "Rowid"            OpHelp("r[P2]=rowid"),
+     /* 102 */ "NullRow"          OpHelp(""),
+     /* 103 */ "Last"             OpHelp(""),
+     /* 104 */ "SorterSort"       OpHelp(""),
+     /* 105 */ "Sort"             OpHelp(""),
+     /* 106 */ "Rewind"           OpHelp(""),
+     /* 107 */ "SorterInsert"     OpHelp(""),
+     /* 108 */ "IdxInsert"        OpHelp("key=r[P2]"),
+     /* 109 */ "IdxDelete"        OpHelp("key=r[P2@P3]"),
+     /* 110 */ "IdxRowid"         OpHelp("r[P2]=rowid"),
+     /* 111 */ "IdxLE"            OpHelp("key=r[P3@P4]"),
+     /* 112 */ "IdxGT"            OpHelp("key=r[P3@P4]"),
+     /* 113 */ "IdxLT"            OpHelp("key=r[P3@P4]"),
+     /* 114 */ "IdxGE"            OpHelp("key=r[P3@P4]"),
+     /* 115 */ "Destroy"          OpHelp(""),
+     /* 116 */ "Clear"            OpHelp(""),
+     /* 117 */ "ResetSorter"      OpHelp(""),
+     /* 118 */ "CreateIndex"      OpHelp("r[P2]=root iDb=P1"),
+     /* 119 */ "CreateTable"      OpHelp("r[P2]=root iDb=P1"),
+     /* 120 */ "ParseSchema"      OpHelp(""),
+     /* 121 */ "LoadAnalysis"     OpHelp(""),
+     /* 122 */ "DropTable"        OpHelp(""),
+     /* 123 */ "DropIndex"        OpHelp(""),
+     /* 124 */ "DropTrigger"      OpHelp(""),
+     /* 125 */ "IntegrityCk"      OpHelp(""),
+     /* 126 */ "RowSetAdd"        OpHelp("rowset(P1)=r[P2]"),
+     /* 127 */ "RowSetRead"       OpHelp("r[P3]=rowset(P1)"),
+     /* 128 */ "RowSetTest"       OpHelp("if r[P3] in rowset(P1) goto P2"),
+     /* 129 */ "Program"          OpHelp(""),
+     /* 130 */ "Param"            OpHelp(""),
+     /* 131 */ "FkCounter"        OpHelp("fkctr[P1]+=P2"),
+     /* 132 */ "FkIfZero"         OpHelp("if fkctr[P1]==0 goto P2"),
      /* 133 */ "Real"             OpHelp("r[P2]=P4"),
-     /* 134 */ "IfNeg"            OpHelp("if r[P1]<0 goto P2"),
-     /* 135 */ "IfZero"           OpHelp("r[P1]+=P3, if r[P1]==0 goto P2"),
-     /* 136 */ "AggFinal"         OpHelp("accum=r[P1] N=P2"),
-     /* 137 */ "IncrVacuum"       OpHelp(""),
-     /* 138 */ "Expire"           OpHelp(""),
-     /* 139 */ "TableLock"        OpHelp("iDb=P1 root=P2 write=P3"),
-     /* 140 */ "VBegin"           OpHelp(""),
-     /* 141 */ "VCreate"          OpHelp(""),
-     /* 142 */ "VDestroy"         OpHelp(""),
+     /* 134 */ "MemMax"           OpHelp("r[P1]=max(r[P1],r[P2])"),
+     /* 135 */ "IfPos"            OpHelp("if r[P1]>0 goto P2"),
+     /* 136 */ "IfNeg"            OpHelp("r[P1]+=P3, if r[P1]<0 goto P2"),
+     /* 137 */ "IfZero"           OpHelp("r[P1]+=P3, if r[P1]==0 goto P2"),
+     /* 138 */ "AggFinal"         OpHelp("accum=r[P1] N=P2"),
+     /* 139 */ "IncrVacuum"       OpHelp(""),
+     /* 140 */ "Expire"           OpHelp(""),
+     /* 141 */ "TableLock"        OpHelp("iDb=P1 root=P2 write=P3"),
+     /* 142 */ "VBegin"           OpHelp(""),
      /* 143 */ "ToText"           OpHelp(""),
      /* 144 */ "ToBlob"           OpHelp(""),
      /* 145 */ "ToNumeric"        OpHelp(""),
      /* 146 */ "ToInt"            OpHelp(""),
      /* 147 */ "ToReal"           OpHelp(""),
-     /* 148 */ "VOpen"            OpHelp(""),
-     /* 149 */ "VColumn"          OpHelp("r[P3]=vcolumn(P2)"),
-     /* 150 */ "VNext"            OpHelp(""),
-     /* 151 */ "VRename"          OpHelp(""),
-     /* 152 */ "Pagecount"        OpHelp(""),
-     /* 153 */ "MaxPgcnt"         OpHelp(""),
-     /* 154 */ "Init"             OpHelp("Start at P2"),
-     /* 155 */ "Noop"             OpHelp(""),
-     /* 156 */ "Explain"          OpHelp(""),
+     /* 148 */ "VCreate"          OpHelp(""),
+     /* 149 */ "VDestroy"         OpHelp(""),
+     /* 150 */ "VOpen"            OpHelp(""),
+     /* 151 */ "VColumn"          OpHelp("r[P3]=vcolumn(P2)"),
+     /* 152 */ "VNext"            OpHelp(""),
+     /* 153 */ "VRename"          OpHelp(""),
+     /* 154 */ "Pagecount"        OpHelp(""),
+     /* 155 */ "MaxPgcnt"         OpHelp(""),
+     /* 156 */ "Init"             OpHelp("Start at P2"),
+     /* 157 */ "Noop"             OpHelp(""),
+     /* 158 */ "Explain"          OpHelp(""),
   };
   return azName[i];
 }
@@ -23579,11 +24161,10 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
 #include <sys/time.h>
 #include <errno.h>
 #if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
-#include <sys/mman.h>
+# include <sys/mman.h>
 #endif
 
-
-#if SQLITE_ENABLE_LOCKING_STYLE
+#if SQLITE_ENABLE_LOCKING_STYLE || OS_VXWORKS
 # include <sys/ioctl.h>
 # if OS_VXWORKS
 #  include <semaphore.h>
@@ -24011,11 +24592,16 @@ static int posixOpen(const char *zFile, int flags, int mode){
 ** we are not running as root.
 */
 static int posixFchown(int fd, uid_t uid, gid_t gid){
+#if OS_VXWORKS
+  return 0;
+#else
   return geteuid() ? 0 : fchown(fd,uid,gid);
+#endif
 }
 
 /* Forward reference */
 static int openDirectory(const char*, int*);
+static int unixGetpagesize(void);
 
 /*
 ** Many system calls are accessed through pointer-to-functions so that
@@ -24066,7 +24652,7 @@ static struct unix_syscall {
   { "read",         (sqlite3_syscall_ptr)read,       0  },
 #define osRead      ((ssize_t(*)(int,void*,size_t))aSyscall[8].pCurrent)
 
-#if defined(USE_PREAD) || SQLITE_ENABLE_LOCKING_STYLE
+#if defined(USE_PREAD) || (SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS)
   { "pread",        (sqlite3_syscall_ptr)pread,      0  },
 #else
   { "pread",        (sqlite3_syscall_ptr)0,          0  },
@@ -24083,7 +24669,7 @@ static struct unix_syscall {
   { "write",        (sqlite3_syscall_ptr)write,      0  },
 #define osWrite     ((ssize_t(*)(int,const void*,size_t))aSyscall[11].pCurrent)
 
-#if defined(USE_PREAD) || SQLITE_ENABLE_LOCKING_STYLE
+#if defined(USE_PREAD) || (SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS)
   { "pwrite",       (sqlite3_syscall_ptr)pwrite,     0  },
 #else
   { "pwrite",       (sqlite3_syscall_ptr)0,          0  },
@@ -24137,6 +24723,9 @@ static struct unix_syscall {
   { "mremap",       (sqlite3_syscall_ptr)0,               0 },
 #endif
 #define osMremap ((void*(*)(void*,size_t,size_t,int,...))aSyscall[23].pCurrent)
+  { "getpagesize",  (sqlite3_syscall_ptr)unixGetpagesize, 0 },
+#define osGetpagesize ((int(*)(void))aSyscall[24].pCurrent)
+
 #endif
 
 }; /* End of the overrideable system calls */
@@ -24450,16 +25039,6 @@ static int sqliteErrorFromPosixError(int posixError, int sqliteIOErr) {
   case EPERM: 
     return SQLITE_PERM;
     
-  /* EDEADLK is only possible if a call to fcntl(F_SETLKW) is made. And
-  ** this module never makes such a call. And the code in SQLite itself 
-  ** asserts that SQLITE_IOERR_BLOCKED is never returned. For these reasons
-  ** this case is also commented out. If the system does set errno to EDEADLK,
-  ** the default SQLITE_IOERR_XXX code will be returned. */
-#if 0
-  case EDEADLK:
-    return SQLITE_IOERR_BLOCKED;
-#endif
-    
 #if EOPNOTSUPP!=ENOTSUP
   case EOPNOTSUPP: 
     /* something went terribly awry, unless during file system support 
@@ -24992,9 +25571,13 @@ static int findInodeInfo(
 ** Return TRUE if pFile has been renamed or unlinked since it was first opened.
 */
 static int fileHasMoved(unixFile *pFile){
+#if OS_VXWORKS
+  return pFile->pInode!=0 && pFile->pId!=pFile->pInode->fileId.pId;
+#else
   struct stat buf;
   return pFile->pInode!=0 &&
-         (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino);
+      (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino);
+#endif
 }
 
 
@@ -25608,6 +26191,13 @@ static int closeUnixFile(sqlite3_file *id){
     pFile->pId = 0;
   }
 #endif
+#ifdef SQLITE_UNLINK_AFTER_CLOSE
+  if( pFile->ctrlFlags & UNIXFILE_DELETE ){
+    osUnlink(pFile->zPath);
+    sqlite3_free(*(char**)&pFile->zPath);
+    pFile->zPath = 0;
+  }
+#endif
   OSTRACE(("CLOSE   %-3d\n", pFile->h));
   OpenCounter(-1);
   sqlite3_free(pFile->pUnused);
@@ -26130,7 +26720,6 @@ static int semCheckReservedLock(sqlite3_file *id, int *pResOut) {
   /* Otherwise see if some other process holds it. */
   if( !reserved ){
     sem_t *pSem = pFile->pInode->pSem;
-    struct stat statBuf;
 
     if( sem_trywait(pSem)==-1 ){
       int tErrno = errno;
@@ -26183,7 +26772,6 @@ static int semCheckReservedLock(sqlite3_file *id, int *pResOut) {
 */
 static int semLock(sqlite3_file *id, int eFileLock) {
   unixFile *pFile = (unixFile*)id;
-  int fd;
   sem_t *pSem = pFile->pInode->pSem;
   int rc = SQLITE_OK;
 
@@ -27646,8 +28234,25 @@ static int unixDeviceCharacteristics(sqlite3_file *id){
   return rc;
 }
 
-#ifndef SQLITE_OMIT_WAL
+#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
+
+/*
+** Return the system page size.
+**
+** This function should not be called directly by other code in this file. 
+** Instead, it should be called via macro osGetpagesize().
+*/
+static int unixGetpagesize(void){
+#if defined(_BSD_SOURCE)
+  return getpagesize();
+#else
+  return (int)sysconf(_SC_PAGESIZE);
+#endif
+}
 
+#endif /* !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 */
+
+#ifndef SQLITE_OMIT_WAL
 
 /*
 ** Object used to represent an shared memory buffer.  
@@ -27798,6 +28403,22 @@ static int unixShmSystemLock(
   return rc;        
 }
 
+/*
+** Return the minimum number of 32KB shm regions that should be mapped at
+** a time, assuming that each mapping must be an integer multiple of the
+** current system page-size.
+**
+** Usually, this is 1. The exception seems to be systems that are configured
+** to use 64KB pages - in this case each mapping must cover at least two
+** shm regions.
+*/
+static int unixShmRegionPerMap(void){
+  int shmsz = 32*1024;            /* SHM region size */
+  int pgsz = osGetpagesize();   /* System page size */
+  assert( ((pgsz-1)&pgsz)==0 );   /* Page size must be a power of 2 */
+  if( pgsz<shmsz ) return 1;
+  return pgsz/shmsz;
+}
 
 /*
 ** Purge the unixShmNodeList list of all entries with unixShmNode.nRef==0.
@@ -27809,10 +28430,11 @@ static void unixShmPurge(unixFile *pFd){
   unixShmNode *p = pFd->pInode->pShmNode;
   assert( unixMutexHeld() );
   if( p && p->nRef==0 ){
+    int nShmPerMap = unixShmRegionPerMap();
     int i;
     assert( p->pInode==pFd->pInode );
     sqlite3_mutex_free(p->mutex);
-    for(i=0; i<p->nRegion; i++){
+    for(i=0; i<p->nRegion; i+=nShmPerMap){
       if( p->h>=0 ){
         osMunmap(p->apRegion[i], p->szRegion);
       }else{
@@ -28019,6 +28641,8 @@ static int unixShmMap(
   unixShm *p;
   unixShmNode *pShmNode;
   int rc = SQLITE_OK;
+  int nShmPerMap = unixShmRegionPerMap();
+  int nReqRegion;
 
   /* If the shared-memory file has not yet been opened, open it now. */
   if( pDbFd->pShm==0 ){
@@ -28034,9 +28658,12 @@ static int unixShmMap(
   assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 );
   assert( pShmNode->h<0 || pDbFd->pInode->bProcessLock==0 );
 
-  if( pShmNode->nRegion<=iRegion ){
+  /* Minimum number of regions required to be mapped. */
+  nReqRegion = ((iRegion+nShmPerMap) / nShmPerMap) * nShmPerMap;
+
+  if( pShmNode->nRegion<nReqRegion ){
     char **apNew;                      /* New apRegion[] array */
-    int nByte = (iRegion+1)*szRegion;  /* Minimum required file size */
+    int nByte = nReqRegion*szRegion;   /* Minimum required file size */
     struct stat sStat;                 /* Used by fstat() */
 
     pShmNode->szRegion = szRegion;
@@ -28085,17 +28712,19 @@ static int unixShmMap(
 
     /* Map the requested memory region into this processes address space. */
     apNew = (char **)sqlite3_realloc(
-        pShmNode->apRegion, (iRegion+1)*sizeof(char *)
+        pShmNode->apRegion, nReqRegion*sizeof(char *)
     );
     if( !apNew ){
       rc = SQLITE_IOERR_NOMEM;
       goto shmpage_out;
     }
     pShmNode->apRegion = apNew;
-    while(pShmNode->nRegion<=iRegion){
+    while( pShmNode->nRegion<nReqRegion ){
+      int nMap = szRegion*nShmPerMap;
+      int i;
       void *pMem;
       if( pShmNode->h>=0 ){
-        pMem = osMmap(0, szRegion,
+        pMem = osMmap(0, nMap,
             pShmNode->isReadonly ? PROT_READ : PROT_READ|PROT_WRITE, 
             MAP_SHARED, pShmNode->h, szRegion*(i64)pShmNode->nRegion
         );
@@ -28111,8 +28740,11 @@ static int unixShmMap(
         }
         memset(pMem, 0, szRegion);
       }
-      pShmNode->apRegion[pShmNode->nRegion] = pMem;
-      pShmNode->nRegion++;
+
+      for(i=0; i<nShmPerMap; i++){
+        pShmNode->apRegion[pShmNode->nRegion+i] = &((char*)pMem)[szRegion*i];
+      }
+      pShmNode->nRegion += nShmPerMap;
     }
   }
 
@@ -28327,19 +28959,6 @@ static void unixUnmapfile(unixFile *pFd){
 }
 
 /*
-** Return the system page size.
-*/
-static int unixGetPagesize(void){
-#if HAVE_MREMAP
-  return 512;
-#elif defined(_BSD_SOURCE)
-  return getpagesize();
-#else
-  return (int)sysconf(_SC_PAGESIZE);
-#endif
-}
-
-/*
 ** Attempt to set the size of the memory mapping maintained by file 
 ** descriptor pFd to nNew bytes. Any existing mapping is discarded.
 **
@@ -28375,8 +28994,12 @@ static void unixRemapfile(
   if( (pFd->ctrlFlags & UNIXFILE_RDONLY)==0 ) flags |= PROT_WRITE;
 
   if( pOrig ){
-    const int szSyspage = unixGetPagesize();
+#if HAVE_MREMAP
+    i64 nReuse = pFd->mmapSize;
+#else
+    const int szSyspage = osGetpagesize();
     i64 nReuse = (pFd->mmapSize & ~(szSyspage-1));
+#endif
     u8 *pReq = &pOrig[nReuse];
 
     /* Unmap any pages of the existing mapping that cannot be reused. */
@@ -29429,6 +30052,12 @@ static int unixOpen(
   if( isDelete ){
 #if OS_VXWORKS
     zPath = zName;
+#elif defined(SQLITE_UNLINK_AFTER_CLOSE)
+    zPath = sqlite3_mprintf("%s", zName);
+    if( zPath==0 ){
+      robust_close(p, fd, __LINE__);
+      return SQLITE_NOMEM;
+    }
 #else
     osUnlink(zName);
 #endif
@@ -29529,7 +30158,11 @@ static int unixDelete(
   UNUSED_PARAMETER(NotUsed);
   SimulateIOError(return SQLITE_IOERR_DELETE);
   if( osUnlink(zPath)==(-1) ){
-    if( errno==ENOENT ){
+    if( errno==ENOENT
+#if OS_VXWORKS
+        || errno==0x380003
+#endif
+    ){
       rc = SQLITE_IOERR_DELETE_NOENT;
     }else{
       rc = unixLogError(SQLITE_IOERR_DELETE, "unlink", zPath);
@@ -31122,7 +31755,7 @@ SQLITE_API int sqlite3_os_init(void){
 
   /* Double-check that the aSyscall[] array has been constructed
   ** correctly.  See ticket [bb3a86e890c8e96ab] */
-  assert( ArraySize(aSyscall)==24 );
+  assert( ArraySize(aSyscall)==25 );
 
   /* Register all VFSes defined in the aVfs[] array */
   for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
@@ -31162,11 +31795,6 @@ SQLITE_API int sqlite3_os_end(void){
 */
 #if SQLITE_OS_WIN               /* This file is used for Windows only */
 
-#ifdef __CYGWIN__
-# include <sys/cygwin.h>
-# include <errno.h> /* amalgamator: keep */
-#endif
-
 /*
 ** Include code that is common to all os_*.c files
 */
@@ -31381,6 +32009,10 @@ SQLITE_API int sqlite3_open_file_count = 0;
 /************** Continuing where we left off in os_win.c *********************/
 
 /*
+** Include the header file for the Windows VFS.
+*/
+
+/*
 ** Compiling and using WAL mode requires several APIs that are only
 ** available in Windows platforms based on the NT kernel.
 */
@@ -31427,18 +32059,14 @@ SQLITE_API int sqlite3_open_file_count = 0;
 #endif
 
 /*
-** Check if the GetVersionEx[AW] functions should be considered deprecated
-** and avoid using them in that case.  It should be noted here that if the
-** value of the SQLITE_WIN32_GETVERSIONEX pre-processor macro is zero
-** (whether via this block or via being manually specified), that implies
-** the underlying operating system will always be based on the Windows NT
-** Kernel.
+** Check to see if the GetVersionEx[AW] functions are deprecated on the
+** target system.  GetVersionEx was first deprecated in Win8.1.
 */
 #ifndef SQLITE_WIN32_GETVERSIONEX
 #  if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINBLUE
-#    define SQLITE_WIN32_GETVERSIONEX   0
+#    define SQLITE_WIN32_GETVERSIONEX   0   /* GetVersionEx() is deprecated */
 #  else
-#    define SQLITE_WIN32_GETVERSIONEX   1
+#    define SQLITE_WIN32_GETVERSIONEX   1   /* GetVersionEx() is current */
 #  endif
 #endif
 
@@ -31510,7 +32138,7 @@ SQLITE_API int sqlite3_open_file_count = 0;
 ** [sometimes] not used by the code (e.g. via conditional compilation).
 */
 #ifndef UNUSED_VARIABLE_VALUE
-#  define UNUSED_VARIABLE_VALUE(x) (void)(x)
+#  define UNUSED_VARIABLE_VALUE(x)      (void)(x)
 #endif
 
 /*
@@ -31559,7 +32187,7 @@ WINBASEAPI BOOL WINAPI UnmapViewOfFile(LPCVOID);
 ** Some Microsoft compilers lack this definition.
 */
 #ifndef INVALID_FILE_ATTRIBUTES
-# define INVALID_FILE_ATTRIBUTES ((DWORD)-1) 
+# define INVALID_FILE_ATTRIBUTES ((DWORD)-1)
 #endif
 
 #ifndef FILE_FLAG_MASK
@@ -31609,7 +32237,7 @@ struct winFile {
   int szChunk;            /* Chunk size configured by FCNTL_CHUNK_SIZE */
 #if SQLITE_OS_WINCE
   LPWSTR zDeleteOnClose;  /* Name of file to delete when closing */
-  HANDLE hMutex;          /* Mutex used to control access to shared lock */  
+  HANDLE hMutex;          /* Mutex used to control access to shared lock */
   HANDLE hShared;         /* Shared memory segment used for locking */
   winceLock local;        /* Locks obtained by this instance of winFile */
   winceLock *shared;      /* Global shared lock memory for the file  */
@@ -31769,10 +32397,9 @@ SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetWin32(void);
 ** can manually set this value to 1 to emulate Win98 behavior.
 */
 #ifdef SQLITE_TEST
-SQLITE_API int sqlite3_os_type = 0;
-#elif !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && \
-      defined(SQLITE_WIN32_HAS_ANSI) && defined(SQLITE_WIN32_HAS_WIDE)
-static int sqlite3_os_type = 0;
+SQLITE_API LONG volatile sqlite3_os_type = 0;
+#else
+static LONG volatile sqlite3_os_type = 0;
 #endif
 
 #ifndef SYSCALL
@@ -32403,6 +33030,22 @@ static struct win_syscall {
 #define osCreateFileMappingFromApp ((HANDLE(WINAPI*)(HANDLE, \
         LPSECURITY_ATTRIBUTES,ULONG,ULONG64,LPCWSTR))aSyscall[75].pCurrent)
 
+/*
+** NOTE: On some sub-platforms, the InterlockedCompareExchange "function"
+**       is really just a macro that uses a compiler intrinsic (e.g. x64).
+**       So do not try to make this is into a redefinable interface.
+*/
+#if defined(InterlockedCompareExchange)
+  { "InterlockedCompareExchange", (SYSCALL)0,                    0 },
+
+#define osInterlockedCompareExchange InterlockedCompareExchange
+#else
+  { "InterlockedCompareExchange", (SYSCALL)InterlockedCompareExchange, 0 },
+
+#define osInterlockedCompareExchange ((LONG(WINAPI*)(LONG volatile*, \
+        LONG,LONG))aSyscall[76].pCurrent)
+#endif /* defined(InterlockedCompareExchange) */
+
 }; /* End of the overrideable system calls */
 
 /*
@@ -32653,22 +33296,38 @@ SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds){
 #elif !defined(SQLITE_WIN32_HAS_WIDE)
 # define osIsNT()  (0)
 #else
-  static int osIsNT(void){
-    if( sqlite3_os_type==0 ){
-#if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WIN8
-      OSVERSIONINFOW sInfo;
-      sInfo.dwOSVersionInfoSize = sizeof(sInfo);
-      osGetVersionExW(&sInfo);
-#else
-      OSVERSIONINFOA sInfo;
-      sInfo.dwOSVersionInfoSize = sizeof(sInfo);
-      osGetVersionExA(&sInfo);
+# define osIsNT()  ((sqlite3_os_type==2) || sqlite3_win32_is_nt())
+#endif
+
+/*
+** This function determines if the machine is running a version of Windows
+** based on the NT kernel.
+*/
+SQLITE_API int sqlite3_win32_is_nt(void){
+#if defined(SQLITE_WIN32_GETVERSIONEX) && SQLITE_WIN32_GETVERSIONEX
+  if( osInterlockedCompareExchange(&sqlite3_os_type, 0, 0)==0 ){
+#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
+        defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WIN8
+    OSVERSIONINFOW sInfo;
+    sInfo.dwOSVersionInfoSize = sizeof(sInfo);
+    osGetVersionExW(&sInfo);
+    osInterlockedCompareExchange(&sqlite3_os_type,
+        (sInfo.dwPlatformId == VER_PLATFORM_WIN32_NT) ? 2 : 1, 0);
+#elif defined(SQLITE_WIN32_HAS_ANSI)
+    OSVERSIONINFOA sInfo;
+    sInfo.dwOSVersionInfoSize = sizeof(sInfo);
+    osGetVersionExA(&sInfo);
+    osInterlockedCompareExchange(&sqlite3_os_type,
+        (sInfo.dwPlatformId == VER_PLATFORM_WIN32_NT) ? 2 : 1, 0);
 #endif
-      sqlite3_os_type = sInfo.dwPlatformId==VER_PLATFORM_WIN32_NT ? 2 : 1;
-    }
-    return sqlite3_os_type==2;
   }
+  return osInterlockedCompareExchange(&sqlite3_os_type, 2, 2)==2;
+#elif SQLITE_TEST
+  return osInterlockedCompareExchange(&sqlite3_os_type, 2, 2)==2;
+#else
+  return 1;
 #endif
+}
 
 #ifdef SQLITE_WIN32_MALLOC
 /*
@@ -32876,7 +33535,7 @@ SQLITE_PRIVATE void sqlite3MemSetDefault(void){
 #endif /* SQLITE_WIN32_MALLOC */
 
 /*
-** Convert a UTF-8 string to Microsoft Unicode (UTF-16?). 
+** Convert a UTF-8 string to Microsoft Unicode (UTF-16?).
 **
 ** Space to hold the returned string is obtained from malloc.
 */
@@ -32929,7 +33588,7 @@ static char *winUnicodeToUtf8(LPCWSTR zWideFilename){
 /*
 ** Convert an ANSI string to Microsoft Unicode, based on the
 ** current codepage settings for file apis.
-** 
+**
 ** Space to hold the returned string is obtained
 ** from sqlite3_malloc.
 */
@@ -33003,7 +33662,7 @@ SQLITE_API char *sqlite3_win32_mbcs_to_utf8(const char *zFilename){
 }
 
 /*
-** Convert UTF-8 to multibyte character string.  Space to hold the 
+** Convert UTF-8 to multibyte character string.  Space to hold the
 ** returned string is obtained from sqlite3_malloc().
 */
 SQLITE_API char *sqlite3_win32_utf8_to_mbcs(const char *zFilename){
@@ -33143,11 +33802,11 @@ static int winGetLastErrorMsg(DWORD lastErrno, int nBuf, char *zBuf){
 **
 ** This routine is invoked after an error occurs in an OS function.
 ** It logs a message using sqlite3_log() containing the current value of
-** error code and, if possible, the human-readable equivalent from 
+** error code and, if possible, the human-readable equivalent from
 ** FormatMessage.
 **
 ** The first argument passed to the macro should be the error code that
-** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN). 
+** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN).
 ** The two subsequent arguments should be the name of the OS function that
 ** failed and the associated file-system path, if any.
 */
@@ -33178,7 +33837,7 @@ static int winLogErrorAtLine(
 
 /*
 ** The number of times that a ReadFile(), WriteFile(), and DeleteFile()
-** will be retried following a locking error - probably caused by 
+** will be retried following a locking error - probably caused by
 ** antivirus software.  Also the initial delay before the first retry.
 ** The delay increases linearly with each retry.
 */
@@ -33192,6 +33851,32 @@ static int winIoerrRetry = SQLITE_WIN32_IOERR_RETRY;
 static int winIoerrRetryDelay = SQLITE_WIN32_IOERR_RETRY_DELAY;
 
 /*
+** The "winIoerrCanRetry1" macro is used to determine if a particular I/O
+** error code obtained via GetLastError() is eligible to be retried.  It
+** must accept the error code DWORD as its only argument and should return
+** non-zero if the error code is transient in nature and the operation
+** responsible for generating the original error might succeed upon being
+** retried.  The argument to this macro should be a variable.
+**
+** Additionally, a macro named "winIoerrCanRetry2" may be defined.  If it
+** is defined, it will be consulted only when the macro "winIoerrCanRetry1"
+** returns zero.  The "winIoerrCanRetry2" macro is completely optional and
+** may be used to include additional error codes in the set that should
+** result in the failing I/O operation being retried by the caller.  If
+** defined, the "winIoerrCanRetry2" macro must exhibit external semantics
+** identical to those of the "winIoerrCanRetry1" macro.
+*/
+#if !defined(winIoerrCanRetry1)
+#define winIoerrCanRetry1(a) (((a)==ERROR_ACCESS_DENIED)        || \
+                              ((a)==ERROR_SHARING_VIOLATION)    || \
+                              ((a)==ERROR_LOCK_VIOLATION)       || \
+                              ((a)==ERROR_DEV_NOT_EXIST)        || \
+                              ((a)==ERROR_NETNAME_DELETED)      || \
+                              ((a)==ERROR_SEM_TIMEOUT)          || \
+                              ((a)==ERROR_NETWORK_UNREACHABLE))
+#endif
+
+/*
 ** If a ReadFile() or WriteFile() error occurs, invoke this routine
 ** to see if it should be retried.  Return TRUE to retry.  Return FALSE
 ** to give up with an error.
@@ -33204,13 +33889,18 @@ static int winRetryIoerr(int *pnRetry, DWORD *pError){
     }
     return 0;
   }
-  if( e==ERROR_ACCESS_DENIED ||
-      e==ERROR_LOCK_VIOLATION ||
-      e==ERROR_SHARING_VIOLATION ){
+  if( winIoerrCanRetry1(e) ){
+    sqlite3_win32_sleep(winIoerrRetryDelay*(1+*pnRetry));
+    ++*pnRetry;
+    return 1;
+  }
+#if defined(winIoerrCanRetry2)
+  else if( winIoerrCanRetry2(e) ){
     sqlite3_win32_sleep(winIoerrRetryDelay*(1+*pnRetry));
     ++*pnRetry;
     return 1;
   }
+#endif
   if( pError ){
     *pError = e;
   }
@@ -33222,7 +33912,7 @@ static int winRetryIoerr(int *pnRetry, DWORD *pError){
 */
 static void winLogIoerr(int nRetry){
   if( nRetry ){
-    sqlite3_log(SQLITE_IOERR, 
+    sqlite3_log(SQLITE_IOERR,
       "delayed %dms for lock/sharing conflict",
       winIoerrRetryDelay*nRetry*(nRetry+1)/2
     );
@@ -33316,17 +34006,17 @@ static int winceCreateLock(const char *zFilename, winFile *pFile){
 
   /* Acquire the mutex before continuing */
   winceMutexAcquire(pFile->hMutex);
-  
-  /* Since the names of named mutexes, semaphores, file mappings etc are 
+
+  /* Since the names of named mutexes, semaphores, file mappings etc are
   ** case-sensitive, take advantage of that by uppercasing the mutex name
   ** and using that as the shared filemapping name.
   */
   osCharUpperW(zName);
   pFile->hShared = osCreateFileMappingW(INVALID_HANDLE_VALUE, NULL,
                                         PAGE_READWRITE, 0, sizeof(winceLock),
-                                        zName);  
+                                        zName);
 
-  /* Set a flag that indicates we're the first to create the memory so it 
+  /* Set a flag that indicates we're the first to create the memory so it
   ** must be zero-initialized */
   lastErrno = osGetLastError();
   if (lastErrno == ERROR_ALREADY_EXISTS){
@@ -33337,7 +34027,7 @@ static int winceCreateLock(const char *zFilename, winFile *pFile){
 
   /* If we succeeded in making the shared memory handle, map it. */
   if( pFile->hShared ){
-    pFile->shared = (winceLock*)osMapViewOfFile(pFile->hShared, 
+    pFile->shared = (winceLock*)osMapViewOfFile(pFile->hShared,
              FILE_MAP_READ|FILE_MAP_WRITE, 0, 0, sizeof(winceLock));
     /* If mapping failed, close the shared memory handle and erase it */
     if( !pFile->shared ){
@@ -33363,7 +34053,7 @@ static int winceCreateLock(const char *zFilename, winFile *pFile){
     pFile->hMutex = NULL;
     return SQLITE_IOERR;
   }
-  
+
   /* Initialize the shared memory if we're supposed to */
   if( bInit ){
     memset(pFile->shared, 0, sizeof(winceLock));
@@ -33401,13 +34091,13 @@ static void winceDestroyLock(winFile *pFile){
     osCloseHandle(pFile->hShared);
 
     /* Done with the mutex */
-    winceMutexRelease(pFile->hMutex);    
+    winceMutexRelease(pFile->hMutex);
     osCloseHandle(pFile->hMutex);
     pFile->hMutex = NULL;
   }
 }
 
-/* 
+/*
 ** An implementation of the LockFile() API of Windows for CE
 */
 static BOOL winceLockFile(
@@ -33618,8 +34308,8 @@ static BOOL winUnlockFile(
 #endif
 
 /*
-** Move the current position of the file handle passed as the first 
-** argument to offset iOffset within the file. If successful, return 0. 
+** Move the current position of the file handle passed as the first
+** argument to offset iOffset within the file. If successful, return 0.
 ** Otherwise, set pFile->lastErrno and return non-zero.
 */
 static int winSeekFile(winFile *pFile, sqlite3_int64 iOffset){
@@ -33634,11 +34324,11 @@ static int winSeekFile(winFile *pFile, sqlite3_int64 iOffset){
   upperBits = (LONG)((iOffset>>32) & 0x7fffffff);
   lowerBits = (LONG)(iOffset & 0xffffffff);
 
-  /* API oddity: If successful, SetFilePointer() returns a dword 
+  /* API oddity: If successful, SetFilePointer() returns a dword
   ** containing the lower 32-bits of the new file-offset. Or, if it fails,
-  ** it returns INVALID_SET_FILE_POINTER. However according to MSDN, 
-  ** INVALID_SET_FILE_POINTER may also be a valid new offset. So to determine 
-  ** whether an error has actually occurred, it is also necessary to call 
+  ** it returns INVALID_SET_FILE_POINTER. However according to MSDN,
+  ** INVALID_SET_FILE_POINTER may also be a valid new offset. So to determine
+  ** whether an error has actually occurred, it is also necessary to call
   ** GetLastError().
   */
   dwRet = osSetFilePointer(pFile->h, lowerBits, &upperBits, FILE_BEGIN);
@@ -33721,7 +34411,7 @@ static int winClose(sqlite3_file *id){
     int cnt = 0;
     while(
            osDeleteFileW(pFile->zDeleteOnClose)==0
-        && osGetFileAttributesW(pFile->zDeleteOnClose)!=0xffffffff 
+        && osGetFileAttributesW(pFile->zDeleteOnClose)!=0xffffffff
         && cnt++ < WINCE_DELETION_ATTEMPTS
     ){
        sqlite3_win32_sleep(100);  /* Wait a little before trying again */
@@ -34149,7 +34839,7 @@ static int winGetReadLock(winFile *pFile){
     pFile->lastErrno = osGetLastError();
     /* No need to log a failure to lock */
   }
-  OSTRACE(("READ-LOCK file=%p, rc=%s\n", pFile->h, sqlite3ErrName(res)));
+  OSTRACE(("READ-LOCK file=%p, result=%d\n", pFile->h, res));
   return res;
 }
 
@@ -34173,7 +34863,7 @@ static int winUnlockReadLock(winFile *pFile){
     winLogError(SQLITE_IOERR_UNLOCK, pFile->lastErrno,
                 "winUnlockReadLock", pFile->zPath);
   }
-  OSTRACE(("READ-UNLOCK file=%p, rc=%s\n", pFile->h, sqlite3ErrName(res)));
+  OSTRACE(("READ-UNLOCK file=%p, result=%d\n", pFile->h, res));
   return res;
 }
 
@@ -34248,8 +34938,16 @@ static int winLock(sqlite3_file *id, int locktype){
       ** If you are using this code as a model for alternative VFSes, do not
       ** copy this retry logic.  It is a hack intended for Windows only.
       */
-      OSTRACE(("LOCK-PENDING-FAIL file=%p, count=%d, rc=%s\n",
-               pFile->h, cnt, sqlite3ErrName(res)));
+      lastErrno = osGetLastError();
+      OSTRACE(("LOCK-PENDING-FAIL file=%p, count=%d, result=%d\n",
+               pFile->h, cnt, res));
+      if( lastErrno==ERROR_INVALID_HANDLE ){
+        pFile->lastErrno = lastErrno;
+        rc = SQLITE_IOERR_LOCK;
+        OSTRACE(("LOCK-FAIL file=%p, count=%d, rc=%s\n",
+                 pFile->h, cnt, sqlite3ErrName(rc)));
+        return rc;
+      }
       if( cnt ) sqlite3_win32_sleep(1);
     }
     gotPendingLock = res;
@@ -34334,7 +35032,7 @@ static int winLock(sqlite3_file *id, int locktype){
 ** non-zero, otherwise zero.
 */
 static int winCheckReservedLock(sqlite3_file *id, int *pResOut){
-  int rc;
+  int res;
   winFile *pFile = (winFile*)id;
 
   SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
@@ -34342,17 +35040,17 @@ static int winCheckReservedLock(sqlite3_file *id, int *pResOut){
 
   assert( id!=0 );
   if( pFile->locktype>=RESERVED_LOCK ){
-    rc = 1;
-    OSTRACE(("TEST-WR-LOCK file=%p, rc=%d (local)\n", pFile->h, rc));
+    res = 1;
+    OSTRACE(("TEST-WR-LOCK file=%p, result=%d (local)\n", pFile->h, res));
   }else{
-    rc = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE, 0, 1, 0);
-    if( rc ){
+    res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE, 0, 1, 0);
+    if( res ){
       winUnlockFile(&pFile->h, RESERVED_BYTE, 0, 1, 0);
     }
-    rc = !rc;
-    OSTRACE(("TEST-WR-LOCK file=%p, rc=%d (remote)\n", pFile->h, rc));
+    res = !res;
+    OSTRACE(("TEST-WR-LOCK file=%p, result=%d (remote)\n", pFile->h, res));
   }
-  *pResOut = rc;
+  *pResOut = res;
   OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n",
            pFile->h, pResOut, *pResOut));
   return SQLITE_OK;
@@ -34493,6 +35191,17 @@ static int winFileControl(sqlite3_file *id, int op, void *pArg){
       OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
       return SQLITE_OK;
     }
+#ifdef SQLITE_TEST
+    case SQLITE_FCNTL_WIN32_SET_HANDLE: {
+      LPHANDLE phFile = (LPHANDLE)pArg;
+      HANDLE hOldFile = pFile->h;
+      pFile->h = *phFile;
+      *phFile = hOldFile;
+      OSTRACE(("FCNTL oldFile=%p, newFile=%p, rc=SQLITE_OK\n",
+               hOldFile, pFile->h));
+      return SQLITE_OK;
+    }
+#endif
     case SQLITE_FCNTL_TEMPFILENAME: {
       char *zTFile = 0;
       int rc = winGetTempname(pFile->pVfs, &zTFile);
@@ -34550,7 +35259,7 @@ static int winDeviceCharacteristics(sqlite3_file *id){
          ((p->ctrlFlags & WINFILE_PSOW)?SQLITE_IOCAP_POWERSAFE_OVERWRITE:0);
 }
 
-/* 
+/*
 ** Windows will only let you create file view mappings
 ** on allocation size granularity boundaries.
 ** During sqlite3_os_init() we do a GetSystemInfo()
@@ -34562,11 +35271,11 @@ static SYSTEM_INFO winSysInfo;
 
 /*
 ** Helper functions to obtain and relinquish the global mutex. The
-** global mutex is used to protect the winLockInfo objects used by 
+** global mutex is used to protect the winLockInfo objects used by
 ** this file, all of which may be shared by multiple threads.
 **
-** Function winShmMutexHeld() is used to assert() that the global mutex 
-** is held when required. This function is only used as part of assert() 
+** Function winShmMutexHeld() is used to assert() that the global mutex
+** is held when required. This function is only used as part of assert()
 ** statements. e.g.
 **
 **   winShmEnterMutex()
@@ -34596,10 +35305,10 @@ static int winShmMutexHeld(void) {
 ** this object or while reading or writing the following fields:
 **
 **      nRef
-**      pNext 
+**      pNext
 **
 ** The following fields are read-only after the object is created:
-** 
+**
 **      fid
 **      zFilename
 **
@@ -34695,7 +35404,7 @@ static int winShmSystemLock(
     if( lockType == _SHM_WRLCK ) dwFlags |= LOCKFILE_EXCLUSIVE_LOCK;
     rc = winLockFile(&pFile->hFile.h, dwFlags, ofst, 0, nByte, 0);
   }
-  
+
   if( rc!= 0 ){
     rc = SQLITE_OK;
   }else{
@@ -34791,7 +35500,7 @@ static int winOpenSharedMemory(winFile *pDbFd){
   }
   pNew->zFilename = (char*)&pNew[1];
   sqlite3_snprintf(nName+15, pNew->zFilename, "%s-shm", pDbFd->zPath);
-  sqlite3FileSuffix3(pDbFd->zPath, pNew->zFilename); 
+  sqlite3FileSuffix3(pDbFd->zPath, pNew->zFilename);
 
   /* Look to see if there is an existing winShmNode that can be used.
   ** If no matching winShmNode currently exists, create a new one.
@@ -34828,7 +35537,7 @@ static int winOpenSharedMemory(winFile *pDbFd){
     }
 
     /* Check to see if another process is holding the dead-man switch.
-    ** If not, truncate the file to zero length. 
+    ** If not, truncate the file to zero length.
     */
     if( winShmSystemLock(pShmNode, _SHM_WRLCK, WIN_SHM_DMS, 1)==SQLITE_OK ){
       rc = winTruncate((sqlite3_file *)&pShmNode->hFile, 0);
@@ -34857,7 +35566,7 @@ static int winOpenSharedMemory(winFile *pDbFd){
   ** the cover of the winShmEnterMutex() mutex and the pointer from the
   ** new (struct winShm) object to the pShmNode has been set. All that is
   ** left to do is to link the new object into the linked list starting
-  ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex 
+  ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex
   ** mutex.
   */
   sqlite3_mutex_enter(pShmNode->mutex);
@@ -34877,7 +35586,7 @@ shm_open_err:
 }
 
 /*
-** Close a connection to shared-memory.  Delete the underlying 
+** Close a connection to shared-memory.  Delete the underlying
 ** storage if deleteFlag is true.
 */
 static int winShmUnmap(
@@ -34966,7 +35675,7 @@ static int winShmLock(
     if( rc==SQLITE_OK ){
       p->exclMask &= ~mask;
       p->sharedMask &= ~mask;
-    } 
+    }
   }else if( flags & SQLITE_SHM_SHARED ){
     u16 allShared = 0;  /* Union of locks held by connections other than "p" */
 
@@ -35005,7 +35714,7 @@ static int winShmLock(
         break;
       }
     }
-  
+
     /* Get the exclusive locks at the system level.  Then if successful
     ** also mark the local connection as being locked.
     */
@@ -35025,7 +35734,7 @@ static int winShmLock(
 }
 
 /*
-** Implement a memory barrier or memory fence on shared memory.  
+** Implement a memory barrier or memory fence on shared memory.
 **
 ** All loads and stores begun before the barrier must complete before
 ** any load or store begun after the barrier.
@@ -35040,22 +35749,22 @@ static void winShmBarrier(
 }
 
 /*
-** This function is called to obtain a pointer to region iRegion of the 
-** shared-memory associated with the database file fd. Shared-memory regions 
-** are numbered starting from zero. Each shared-memory region is szRegion 
+** This function is called to obtain a pointer to region iRegion of the
+** shared-memory associated with the database file fd. Shared-memory regions
+** are numbered starting from zero. Each shared-memory region is szRegion
 ** bytes in size.
 **
 ** If an error occurs, an error code is returned and *pp is set to NULL.
 **
 ** Otherwise, if the isWrite parameter is 0 and the requested shared-memory
 ** region has not been allocated (by any client, including one running in a
-** separate process), then *pp is set to NULL and SQLITE_OK returned. If 
-** isWrite is non-zero and the requested shared-memory region has not yet 
+** separate process), then *pp is set to NULL and SQLITE_OK returned. If
+** isWrite is non-zero and the requested shared-memory region has not yet
 ** been allocated, it is allocated by this function.
 **
 ** If the shared-memory region has already been allocated or is allocated by
-** this call as described above, then it is mapped into this processes 
-** address space (if it is not already), *pp is set to point to the mapped 
+** this call as described above, then it is mapped into this processes
+** address space (if it is not already), *pp is set to point to the mapped
 ** memory and SQLITE_OK returned.
 */
 static int winShmMap(
@@ -35127,17 +35836,17 @@ static int winShmMap(
     while( pShmNode->nRegion<=iRegion ){
       HANDLE hMap = NULL;         /* file-mapping handle */
       void *pMap = 0;             /* Mapped memory region */
-     
+
 #if SQLITE_OS_WINRT
       hMap = osCreateFileMappingFromApp(pShmNode->hFile.h,
           NULL, PAGE_READWRITE, nByte, NULL
       );
 #elif defined(SQLITE_WIN32_HAS_WIDE)
-      hMap = osCreateFileMappingW(pShmNode->hFile.h, 
+      hMap = osCreateFileMappingW(pShmNode->hFile.h,
           NULL, PAGE_READWRITE, 0, nByte, NULL
       );
 #elif defined(SQLITE_WIN32_HAS_ANSI)
-      hMap = osCreateFileMappingA(pShmNode->hFile.h, 
+      hMap = osCreateFileMappingA(pShmNode->hFile.h,
           NULL, PAGE_READWRITE, 0, nByte, NULL
       );
 #endif
@@ -35234,14 +35943,14 @@ static int winUnmapfile(winFile *pFile){
 
 /*
 ** Memory map or remap the file opened by file-descriptor pFd (if the file
-** is already mapped, the existing mapping is replaced by the new). Or, if 
-** there already exists a mapping for this file, and there are still 
+** is already mapped, the existing mapping is replaced by the new). Or, if
+** there already exists a mapping for this file, and there are still
 ** outstanding xFetch() references to it, this function is a no-op.
 **
-** If parameter nByte is non-negative, then it is the requested size of 
-** the mapping to create. Otherwise, if nByte is less than zero, then the 
+** If parameter nByte is non-negative, then it is the requested size of
+** the mapping to create. Otherwise, if nByte is less than zero, then the
 ** requested size is the size of the file on disk. The actual size of the
-** created mapping is either the requested size or the value configured 
+** created mapping is either the requested size or the value configured
 ** using SQLITE_FCNTL_MMAP_SIZE, whichever is smaller.
 **
 ** SQLITE_OK is returned if no error occurs (even if the mapping is not
@@ -35270,7 +35979,7 @@ static int winMapfile(winFile *pFd, sqlite3_int64 nByte){
     nMap = pFd->mmapSizeMax;
   }
   nMap &= ~(sqlite3_int64)(winSysInfo.dwPageSize - 1);
- 
+
   if( nMap==0 && pFd->mmapSize>0 ){
     winUnmapfile(pFd);
   }
@@ -35342,7 +36051,7 @@ static int winMapfile(winFile *pFd, sqlite3_int64 nByte){
 ** Finally, if an error does occur, return an SQLite error code. The final
 ** value of *pp is undefined in this case.
 **
-** If this function does return a pointer, the caller must eventually 
+** If this function does return a pointer, the caller must eventually
 ** release the reference by calling winUnfetch().
 */
 static int winFetch(sqlite3_file *fd, i64 iOff, int nAmt, void **pp){
@@ -35377,20 +36086,20 @@ static int winFetch(sqlite3_file *fd, i64 iOff, int nAmt, void **pp){
 }
 
 /*
-** If the third argument is non-NULL, then this function releases a 
+** If the third argument is non-NULL, then this function releases a
 ** reference obtained by an earlier call to winFetch(). The second
 ** argument passed to this function must be the same as the corresponding
-** argument that was passed to the winFetch() invocation. 
+** argument that was passed to the winFetch() invocation.
 **
-** Or, if the third argument is NULL, then this function is being called 
-** to inform the VFS layer that, according to POSIX, any existing mapping 
+** Or, if the third argument is NULL, then this function is being called
+** to inform the VFS layer that, according to POSIX, any existing mapping
 ** may now be invalid and should be unmapped.
 */
 static int winUnfetch(sqlite3_file *fd, i64 iOff, void *p){
 #if SQLITE_MAX_MMAP_SIZE>0
   winFile *pFd = (winFile*)fd;   /* The underlying database file */
 
-  /* If p==0 (unmap the entire file) then there must be no outstanding 
+  /* If p==0 (unmap the entire file) then there must be no outstanding
   ** xFetch references. Or, if p!=0 (meaning it is an xFetch reference),
   ** then there must be at least one outstanding.  */
   assert( (p==0)==(pFd->nFetchOut==0) );
@@ -35536,7 +36245,7 @@ static int winGetTempname(sqlite3_vfs *pVfs, char **pzBuf){
 
   /* It's odd to simulate an io-error here, but really this is just
   ** using the io-error infrastructure to test that SQLite handles this
-  ** function failing. 
+  ** function failing.
   */
   SimulateIOError( return SQLITE_IOERR );
 
@@ -35718,7 +36427,7 @@ static int winGetTempname(sqlite3_vfs *pVfs, char **pzBuf){
   }
 
   /*
-  ** Check that the output buffer is large enough for the temporary file 
+  ** Check that the output buffer is large enough for the temporary file
   ** name in the following format:
   **
   **   "<temporary_directory>/etilqs_XXXXXXXXXXXXXXX\0\0"
@@ -35821,8 +36530,8 @@ static int winOpen(
 
 #ifndef NDEBUG
   int isOpenJournal = (isCreate && (
-        eType==SQLITE_OPEN_MASTER_JOURNAL 
-     || eType==SQLITE_OPEN_MAIN_JOURNAL 
+        eType==SQLITE_OPEN_MASTER_JOURNAL
+     || eType==SQLITE_OPEN_MAIN_JOURNAL
      || eType==SQLITE_OPEN_WAL
   ));
 #endif
@@ -35830,9 +36539,9 @@ static int winOpen(
   OSTRACE(("OPEN name=%s, pFile=%p, flags=%x, pOutFlags=%p\n",
            zUtf8Name, id, flags, pOutFlags));
 
-  /* Check the following statements are true: 
+  /* Check the following statements are true:
   **
-  **   (a) Exactly one of the READWRITE and READONLY flags must be set, and 
+  **   (a) Exactly one of the READWRITE and READONLY flags must be set, and
   **   (b) if CREATE is set, then READWRITE must also be set, and
   **   (c) if EXCLUSIVE is set, then CREATE must also be set.
   **   (d) if DELETEONCLOSE is set, then CREATE must also be set.
@@ -35842,7 +36551,7 @@ static int winOpen(
   assert(isExclusive==0 || isCreate);
   assert(isDelete==0 || isCreate);
 
-  /* The main DB, main journal, WAL file and master journal are never 
+  /* The main DB, main journal, WAL file and master journal are never
   ** automatically deleted. Nor are they ever temporary files.  */
   assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_DB );
   assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_JOURNAL );
@@ -35850,9 +36559,9 @@ static int winOpen(
   assert( (!isDelete && zName) || eType!=SQLITE_OPEN_WAL );
 
   /* Assert that the upper layer has set one of the "file-type" flags. */
-  assert( eType==SQLITE_OPEN_MAIN_DB      || eType==SQLITE_OPEN_TEMP_DB 
-       || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL 
-       || eType==SQLITE_OPEN_SUBJOURNAL   || eType==SQLITE_OPEN_MASTER_JOURNAL 
+  assert( eType==SQLITE_OPEN_MAIN_DB      || eType==SQLITE_OPEN_TEMP_DB
+       || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL
+       || eType==SQLITE_OPEN_SUBJOURNAL   || eType==SQLITE_OPEN_MASTER_JOURNAL
        || eType==SQLITE_OPEN_TRANSIENT_DB || eType==SQLITE_OPEN_WAL
   );
 
@@ -35867,8 +36576,8 @@ static int winOpen(
   }
 #endif
 
-  /* If the second argument to this function is NULL, generate a 
-  ** temporary file name to use 
+  /* If the second argument to this function is NULL, generate a
+  ** temporary file name to use
   */
   if( !zUtf8Name ){
     assert( isDelete && !isOpenJournal );
@@ -35908,8 +36617,8 @@ static int winOpen(
     dwDesiredAccess = GENERIC_READ;
   }
 
-  /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is 
-  ** created. SQLite doesn't use it to indicate "exclusive access" 
+  /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is
+  ** created. SQLite doesn't use it to indicate "exclusive access"
   ** as it is usually understood.
   */
   if( isExclusive ){
@@ -35998,7 +36707,7 @@ static int winOpen(
     sqlite3_free(zConverted);
     sqlite3_free(zTmpname);
     if( isReadWrite && !isExclusive ){
-      return winOpen(pVfs, zName, id, 
+      return winOpen(pVfs, zName, id,
          ((flags|SQLITE_OPEN_READONLY) &
                      ~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)),
          pOutFlags);
@@ -36207,14 +36916,14 @@ static int winAccess(
     WIN32_FILE_ATTRIBUTE_DATA sAttrData;
     memset(&sAttrData, 0, sizeof(sAttrData));
     while( !(rc = osGetFileAttributesExW((LPCWSTR)zConverted,
-                             GetFileExInfoStandard, 
+                             GetFileExInfoStandard,
                              &sAttrData)) && winRetryIoerr(&cnt, &lastErrno) ){}
     if( rc ){
       /* For an SQLITE_ACCESS_EXISTS query, treat a zero-length file
       ** as if it does not exist.
       */
       if(    flags==SQLITE_ACCESS_EXISTS
-          && sAttrData.nFileSizeHigh==0 
+          && sAttrData.nFileSizeHigh==0
           && sAttrData.nFileSizeLow==0 ){
         attr = INVALID_FILE_ATTRIBUTES;
       }else{
@@ -36313,7 +37022,7 @@ static int winFullPathname(
   int nFull,                    /* Size of output buffer in bytes */
   char *zFull                   /* Output buffer */
 ){
-  
+
 #if defined(__CYGWIN__)
   SimulateIOError( return SQLITE_ERROR );
   UNUSED_PARAMETER(nFull);
@@ -36626,12 +37335,12 @@ SQLITE_API int sqlite3_current_time = 0;  /* Fake system time in seconds since 1
 ** epoch of noon in Greenwich on November 24, 4714 B.C according to the
 ** proleptic Gregorian calendar.
 **
-** On success, return SQLITE_OK.  Return SQLITE_ERROR if the time and date 
+** On success, return SQLITE_OK.  Return SQLITE_ERROR if the time and date
 ** cannot be found.
 */
 static int winCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *piNow){
-  /* FILETIME structure is a 64-bit value representing the number of 
-     100-nanosecond intervals since January 1, 1601 (= JD 2305813.5). 
+  /* FILETIME structure is a 64-bit value representing the number of
+     100-nanosecond intervals since January 1, 1601 (= JD 2305813.5).
   */
   FILETIME ft;
   static const sqlite3_int64 winFiletimeEpoch = 23058135*(sqlite3_int64)8640000;
@@ -36639,7 +37348,7 @@ static int winCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *piNow){
   static const sqlite3_int64 unixEpoch = 24405875*(sqlite3_int64)8640000;
 #endif
   /* 2^32 - to avoid use of LL and warnings in gcc */
-  static const sqlite3_int64 max32BitValue = 
+  static const sqlite3_int64 max32BitValue =
       (sqlite3_int64)2000000000 + (sqlite3_int64)2000000000 +
       (sqlite3_int64)294967296;
 
@@ -36655,7 +37364,7 @@ static int winCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *piNow){
 #endif
 
   *piNow = winFiletimeEpoch +
-            ((((sqlite3_int64)ft.dwHighDateTime)*max32BitValue) + 
+            ((((sqlite3_int64)ft.dwHighDateTime)*max32BitValue) +
                (sqlite3_int64)ft.dwLowDateTime)/(sqlite3_int64)10000;
 
 #ifdef SQLITE_TEST
@@ -36774,7 +37483,7 @@ SQLITE_API int sqlite3_os_init(void){
 
   /* Double-check that the aSyscall[] array has been constructed
   ** correctly.  See ticket [bb3a86e890c8e96ab] */
-  assert( ArraySize(aSyscall)==76 );
+  assert( ArraySize(aSyscall)==77 );
 
   /* get memory map allocation granularity */
   memset(&winSysInfo, 0, sizeof(SYSTEM_INFO));
@@ -36792,10 +37501,10 @@ SQLITE_API int sqlite3_os_init(void){
   sqlite3_vfs_register(&winLongPathVfs, 0);
 #endif
 
-  return SQLITE_OK; 
+  return SQLITE_OK;
 }
 
-SQLITE_API int sqlite3_os_end(void){ 
+SQLITE_API int sqlite3_os_end(void){
 #if SQLITE_OS_WINRT
   if( sleepObj!=NULL ){
     osCloseHandle(sleepObj);
@@ -39003,8 +39712,8 @@ struct RowSet {
   struct RowSetEntry *pFresh;    /* Source of new entry objects */
   struct RowSetEntry *pForest;   /* List of binary trees of entries */
   u16 nFresh;                    /* Number of objects on pFresh */
-  u8 rsFlags;                    /* Various flags */
-  u8 iBatch;                     /* Current insert batch */
+  u16 rsFlags;                   /* Various flags */
+  int iBatch;                    /* Current insert batch */
 };
 
 /*
@@ -39338,7 +40047,7 @@ SQLITE_PRIVATE int sqlite3RowSetNext(RowSet *p, i64 *pRowid){
 ** on pRowSet->pEntry, then sort those entires into the forest at
 ** pRowSet->pForest so that they can be tested.
 */
-SQLITE_PRIVATE int sqlite3RowSetTest(RowSet *pRowSet, u8 iBatch, sqlite3_int64 iRowid){
+SQLITE_PRIVATE int sqlite3RowSetTest(RowSet *pRowSet, int iBatch, sqlite3_int64 iRowid){
   struct RowSetEntry *p, *pTree;
 
   /* This routine is never called after sqlite3RowSetNext() */
@@ -40167,7 +40876,8 @@ struct Pager {
   u8 ckptSyncFlags;           /* SYNC_NORMAL or SYNC_FULL for checkpoint */
   u8 walSyncFlags;            /* SYNC_NORMAL or SYNC_FULL for wal writes */
   u8 syncFlags;               /* SYNC_NORMAL or SYNC_FULL otherwise */
-  u8 tempFile;                /* zFilename is a temporary file */
+  u8 tempFile;                /* zFilename is a temporary or immutable file */
+  u8 noLock;                  /* Do not lock (except in WAL mode) */
   u8 readOnly;                /* True for a read-only database */
   u8 memDb;                   /* True to inhibit all file I/O */
 
@@ -40632,7 +41342,7 @@ static int pagerUnlockDb(Pager *pPager, int eLock){
   assert( eLock!=NO_LOCK || pagerUseWal(pPager)==0 );
   if( isOpen(pPager->fd) ){
     assert( pPager->eLock>=eLock );
-    rc = sqlite3OsUnlock(pPager->fd, eLock);
+    rc = pPager->noLock ? SQLITE_OK : sqlite3OsUnlock(pPager->fd, eLock);
     if( pPager->eLock!=UNKNOWN_LOCK ){
       pPager->eLock = (u8)eLock;
     }
@@ -40656,7 +41366,7 @@ static int pagerLockDb(Pager *pPager, int eLock){
 
   assert( eLock==SHARED_LOCK || eLock==RESERVED_LOCK || eLock==EXCLUSIVE_LOCK );
   if( pPager->eLock<eLock || pPager->eLock==UNKNOWN_LOCK ){
-    rc = sqlite3OsLock(pPager->fd, eLock);
+    rc = pPager->noLock ? SQLITE_OK : sqlite3OsLock(pPager->fd, eLock);
     if( rc==SQLITE_OK && (pPager->eLock!=UNKNOWN_LOCK||eLock==EXCLUSIVE_LOCK) ){
       pPager->eLock = (u8)eLock;
       IOTRACE(("LOCK %p %d\n", pPager, eLock))
@@ -41165,12 +41875,11 @@ static int writeMasterJournal(Pager *pPager, const char *zMaster){
 
   if( !zMaster 
    || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
-   || pPager->journalMode==PAGER_JOURNALMODE_OFF 
+   || !isOpen(pPager->jfd)
   ){
     return SQLITE_OK;
   }
   pPager->setMaster = 1;
-  assert( isOpen(pPager->jfd) );
   assert( pPager->journalHdr <= pPager->journalOff );
 
   /* Calculate the length in bytes and the checksum of zMaster */
@@ -44216,30 +44925,38 @@ SQLITE_PRIVATE int sqlite3PagerOpen(
     **    + The value returned by sqlite3OsSectorSize()
     **    + The largest page size that can be written atomically.
     */
-    if( rc==SQLITE_OK && !readOnly ){
-      setSectorSize(pPager);
-      assert(SQLITE_DEFAULT_PAGE_SIZE<=SQLITE_MAX_DEFAULT_PAGE_SIZE);
-      if( szPageDflt<pPager->sectorSize ){
-        if( pPager->sectorSize>SQLITE_MAX_DEFAULT_PAGE_SIZE ){
-          szPageDflt = SQLITE_MAX_DEFAULT_PAGE_SIZE;
-        }else{
-          szPageDflt = (u32)pPager->sectorSize;
+    if( rc==SQLITE_OK ){
+      int iDc = sqlite3OsDeviceCharacteristics(pPager->fd);
+      if( !readOnly ){
+        setSectorSize(pPager);
+        assert(SQLITE_DEFAULT_PAGE_SIZE<=SQLITE_MAX_DEFAULT_PAGE_SIZE);
+        if( szPageDflt<pPager->sectorSize ){
+          if( pPager->sectorSize>SQLITE_MAX_DEFAULT_PAGE_SIZE ){
+            szPageDflt = SQLITE_MAX_DEFAULT_PAGE_SIZE;
+          }else{
+            szPageDflt = (u32)pPager->sectorSize;
+          }
         }
-      }
 #ifdef SQLITE_ENABLE_ATOMIC_WRITE
-      {
-        int iDc = sqlite3OsDeviceCharacteristics(pPager->fd);
-        int ii;
-        assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
-        assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
-        assert(SQLITE_MAX_DEFAULT_PAGE_SIZE<=65536);
-        for(ii=szPageDflt; ii<=SQLITE_MAX_DEFAULT_PAGE_SIZE; ii=ii*2){
-          if( iDc&(SQLITE_IOCAP_ATOMIC|(ii>>8)) ){
-            szPageDflt = ii;
+        {
+          int ii;
+          assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
+          assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
+          assert(SQLITE_MAX_DEFAULT_PAGE_SIZE<=65536);
+          for(ii=szPageDflt; ii<=SQLITE_MAX_DEFAULT_PAGE_SIZE; ii=ii*2){
+            if( iDc&(SQLITE_IOCAP_ATOMIC|(ii>>8)) ){
+              szPageDflt = ii;
+            }
           }
         }
-      }
 #endif
+      }
+      pPager->noLock = sqlite3_uri_boolean(zFilename, "nolock", 0);
+      if( (iDc & SQLITE_IOCAP_IMMUTABLE)!=0
+       || sqlite3_uri_boolean(zFilename, "immutable", 0) ){
+          vfsFlags |= SQLITE_OPEN_READONLY;
+          goto act_like_temp_file;
+      }
     }
   }else{
     /* If a temporary file is requested, it is not opened immediately.
@@ -44249,10 +44966,14 @@ SQLITE_PRIVATE int sqlite3PagerOpen(
     ** This branch is also run for an in-memory database. An in-memory
     ** database is the same as a temp-file that is never written out to
     ** disk and uses an in-memory rollback journal.
+    **
+    ** This branch also runs for files marked as immutable.
     */ 
+act_like_temp_file:
     tempFile = 1;
-    pPager->eState = PAGER_READER;
-    pPager->eLock = EXCLUSIVE_LOCK;
+    pPager->eState = PAGER_READER;     /* Pretend we already have a lock */
+    pPager->eLock = EXCLUSIVE_LOCK;    /* Pretend we are in EXCLUSIVE locking mode */
+    pPager->noLock = 1;                /* Do no locking */
     readOnly = (vfsFlags&SQLITE_OPEN_READONLY);
   }
 
@@ -44293,9 +45014,6 @@ SQLITE_PRIVATE int sqlite3PagerOpen(
   /* pPager->nPage = 0; */
   pPager->mxPgno = SQLITE_MAX_PAGE_COUNT;
   /* pPager->state = PAGER_UNLOCK; */
-#if 0
-  assert( pPager->state == (tempFile ? PAGER_EXCLUSIVE : PAGER_UNLOCK) );
-#endif
   /* pPager->errMask = 0; */
   pPager->tempFile = (u8)tempFile;
   assert( tempFile==PAGER_LOCKINGMODE_NORMAL 
@@ -48862,8 +49580,8 @@ static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){
   ** calls to sqlite3OsSleep() have a delay of 1 microsecond.  Really this
   ** is more of a scheduler yield than an actual delay.  But on the 10th
   ** an subsequent retries, the delays start becoming longer and longer, 
-  ** so that on the 100th (and last) RETRY we delay for 21 milliseconds.
-  ** The total delay time before giving up is less than 1 second.
+  ** so that on the 100th (and last) RETRY we delay for 323 milliseconds.
+  ** The total delay time before giving up is less than 10 seconds.
   */
   if( cnt>5 ){
     int nDelay = 1;                      /* Pause time in microseconds */
@@ -48871,7 +49589,7 @@ static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){
       VVA_ONLY( pWal->lockError = 1; )
       return SQLITE_PROTOCOL;
     }
-    if( cnt>=10 ) nDelay = (cnt-9)*238;  /* Max delay 21ms. Total delay 996ms */
+    if( cnt>=10 ) nDelay = (cnt-9)*(cnt-9)*39;
     sqlite3OsSleep(pWal->pVfs, nDelay);
   }
 
@@ -50377,21 +51095,15 @@ struct BtCursor {
   BtShared *pBt;            /* The BtShared this cursor points to */
   BtCursor *pNext, *pPrev;  /* Forms a linked list of all cursors */
   struct KeyInfo *pKeyInfo; /* Argument passed to comparison function */
-#ifndef SQLITE_OMIT_INCRBLOB
   Pgno *aOverflow;          /* Cache of overflow page locations */
-#endif
-  Pgno pgnoRoot;            /* The root page of this tree */
   CellInfo info;            /* A parse of the cell we are pointing at */
-  i64 nKey;        /* Size of pKey, or last integer key */
-  void *pKey;      /* Saved key that was cursor's last known position */
+  i64 nKey;                 /* Size of pKey, or last integer key */
+  void *pKey;               /* Saved key that was cursor last known position */
+  Pgno pgnoRoot;            /* The root page of this tree */
+  int nOvflAlloc;           /* Allocated size of aOverflow[] array */
   int skipNext;    /* Prev() is noop if negative. Next() is noop if positive */
-  u8 wrFlag;                /* True if writable */
-  u8 atLast;                /* Cursor pointing to the last entry */
-  u8 validNKey;             /* True if info.nKey is valid */
+  u8 curFlags;              /* zero or more BTCF_* flags defined below */
   u8 eState;                /* One of the CURSOR_XXX constants (see below) */
-#ifndef SQLITE_OMIT_INCRBLOB
-  u8 isIncrblobHandle;      /* True if this cursor is an incr. io handle */
-#endif
   u8 hints;                             /* As configured by CursorSetHints() */
   i16 iPage;                            /* Index of current page in apPage */
   u16 aiIdx[BTCURSOR_MAX_DEPTH];        /* Current index in apPage[i] */
@@ -50399,6 +51111,15 @@ struct BtCursor {
 };
 
 /*
+** Legal values for BtCursor.curFlags
+*/
+#define BTCF_WriteFlag    0x01   /* True if a write cursor */
+#define BTCF_ValidNKey    0x02   /* True if info.nKey is valid */
+#define BTCF_ValidOvfl    0x04   /* True if aOverflow is valid */
+#define BTCF_AtLast       0x08   /* Cursor is pointing ot the last entry */
+#define BTCF_Incrblob     0x10   /* True if an incremental I/O handle */
+
+/*
 ** Potential values for BtCursor.eState.
 **
 ** CURSOR_INVALID:
@@ -50984,7 +51705,7 @@ static int hasSharedCacheTableLock(
   ** the correct locks are held.  So do not bother - just return true.
   ** This case does not come up very often anyhow.
   */
-  if( isIndex && (!pSchema || (pSchema->flags&DB_SchemaLoaded)==0) ){
+  if( isIndex && (!pSchema || (pSchema->schemaFlags&DB_SchemaLoaded)==0) ){
     return 1;
   }
 
@@ -51268,16 +51989,11 @@ static int cursorHoldsMutex(BtCursor *p){
 }
 #endif
 
-
-#ifndef SQLITE_OMIT_INCRBLOB
 /*
-** Invalidate the overflow page-list cache for cursor pCur, if any.
+** Invalidate the overflow cache of the cursor passed as the first argument.
+** on the shared btree structure pBt.
 */
-static void invalidateOverflowCache(BtCursor *pCur){
-  assert( cursorHoldsMutex(pCur) );
-  sqlite3_free(pCur->aOverflow);
-  pCur->aOverflow = 0;
-}
+#define invalidateOverflowCache(pCur) (pCur->curFlags &= ~BTCF_ValidOvfl)
 
 /*
 ** Invalidate the overflow page-list cache for all cursors opened
@@ -51291,6 +52007,7 @@ static void invalidateAllOverflowCache(BtShared *pBt){
   }
 }
 
+#ifndef SQLITE_OMIT_INCRBLOB
 /*
 ** This function is called before modifying the contents of a table
 ** to invalidate any incrblob cursors that are open on the
@@ -51313,16 +52030,14 @@ static void invalidateIncrblobCursors(
   BtShared *pBt = pBtree->pBt;
   assert( sqlite3BtreeHoldsMutex(pBtree) );
   for(p=pBt->pCursor; p; p=p->pNext){
-    if( p->isIncrblobHandle && (isClearTable || p->info.nKey==iRow) ){
+    if( (p->curFlags & BTCF_Incrblob)!=0 && (isClearTable || p->info.nKey==iRow) ){
       p->eState = CURSOR_INVALID;
     }
   }
 }
 
 #else
-  /* Stub functions when INCRBLOB is omitted */
-  #define invalidateOverflowCache(x)
-  #define invalidateAllOverflowCache(x)
+  /* Stub function when INCRBLOB is omitted */
   #define invalidateIncrblobCursors(x,y,z)
 #endif /* SQLITE_OMIT_INCRBLOB */
 
@@ -51568,20 +52283,32 @@ static int btreeRestoreCursorPosition(BtCursor *pCur){
 ** at is deleted out from under them.
 **
 ** This routine returns an error code if something goes wrong.  The
-** integer *pHasMoved is set to one if the cursor has moved and 0 if not.
+** integer *pHasMoved is set as follows:
+**
+**    0:   The cursor is unchanged
+**    1:   The cursor is still pointing at the same row, but the pointers
+**         returned by sqlite3BtreeKeyFetch() or sqlite3BtreeDataFetch()
+**         might now be invalid because of a balance() or other change to the
+**         b-tree.
+**    2:   The cursor is no longer pointing to the row.  The row might have
+**         been deleted out from under the cursor.
 */
 SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor *pCur, int *pHasMoved){
   int rc;
 
+  if( pCur->eState==CURSOR_VALID ){
+    *pHasMoved = 0;
+    return SQLITE_OK;
+  }
   rc = restoreCursorPosition(pCur);
   if( rc ){
-    *pHasMoved = 1;
+    *pHasMoved = 2;
     return rc;
   }
   if( pCur->eState!=CURSOR_VALID || NEVER(pCur->skipNext!=0) ){
-    *pHasMoved = 1;
+    *pHasMoved = 2;
   }else{
-    *pHasMoved = 0;
+    *pHasMoved = 1;
   }
   return SQLITE_OK;
 }
@@ -52448,7 +53175,7 @@ static Pgno btreePagecount(BtShared *pBt){
 SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree *p){
   assert( sqlite3BtreeHoldsMutex(p) );
   assert( ((p->pBt->nPage)&0x8000000)==0 );
-  return (int)btreePagecount(p->pBt);
+  return btreePagecount(p->pBt);
 }
 
 /*
@@ -52983,6 +53710,7 @@ SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree *p, int mxPage){
   return SQLITE_OK;
 }
 
+#if SQLITE_MAX_MMAP_SIZE>0
 /*
 ** Change the limit on the amount of the database file that may be
 ** memory mapped.
@@ -52995,6 +53723,7 @@ SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree *p, sqlite3_int64 szMmap){
   sqlite3BtreeLeave(p);
   return SQLITE_OK;
 }
+#endif /* SQLITE_MAX_MMAP_SIZE>0 */
 
 /*
 ** Change the way data is synced to disk in order to increase or decrease
@@ -53371,7 +54100,8 @@ static int countValidCursors(BtShared *pBt, int wrOnly){
   BtCursor *pCur;
   int r = 0;
   for(pCur=pBt->pCursor; pCur; pCur=pCur->pNext){
-    if( (wrOnly==0 || pCur->wrFlag) && pCur->eState!=CURSOR_FAULT ) r++; 
+    if( (wrOnly==0 || (pCur->curFlags & BTCF_WriteFlag)!=0)
+     && pCur->eState!=CURSOR_FAULT ) r++; 
   }
   return r;
 }
@@ -54446,7 +55176,8 @@ static int btreeCursor(
   pCur->pKeyInfo = pKeyInfo;
   pCur->pBtree = p;
   pCur->pBt = pBt;
-  pCur->wrFlag = (u8)wrFlag;
+  assert( wrFlag==0 || wrFlag==BTCF_WriteFlag );
+  pCur->curFlags = wrFlag;
   pCur->pNext = pBt->pCursor;
   if( pCur->pNext ){
     pCur->pNext->pPrev = pCur;
@@ -54516,7 +55247,7 @@ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){
       releasePage(pCur->apPage[i]);
     }
     unlockBtreeIfUnused(pBt);
-    invalidateOverflowCache(pCur);
+    sqlite3DbFree(pBtree->db, pCur->aOverflow);
     /* sqlite3_free(pCur); */
     sqlite3BtreeLeave(pBtree);
   }
@@ -54555,7 +55286,7 @@ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){
     if( pCur->info.nSize==0 ){
       int iPage = pCur->iPage;
       btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info);
-      pCur->validNKey = 1;
+      pCur->curFlags |= BTCF_ValidNKey;
     }else{
       assertCellInfo(pCur);
     }
@@ -54565,8 +55296,8 @@ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){
 #define getCellInfo(pCur)                                                      \
   if( pCur->info.nSize==0 ){                                                   \
     int iPage = pCur->iPage;                                                   \
-    btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info); \
-    pCur->validNKey = 1;                                                       \
+    btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info);        \
+    pCur->curFlags |= BTCF_ValidNKey;                                          \
   }else{                                                                       \
     assertCellInfo(pCur);                                                      \
   }
@@ -54737,10 +55468,12 @@ static int copyPayload(
 
 /*
 ** This function is used to read or overwrite payload information
-** for the entry that the pCur cursor is pointing to. If the eOp
-** parameter is 0, this is a read operation (data copied into
-** buffer pBuf). If it is non-zero, a write (data copied from
-** buffer pBuf).
+** for the entry that the pCur cursor is pointing to. The eOp
+** argument is interpreted as follows:
+**
+**   0: The operation is a read. Populate the overflow cache.
+**   1: The operation is a write. Populate the overflow cache.
+**   2: The operation is a read. Do not populate the overflow cache.
 **
 ** A total of "amt" bytes are read or written beginning at "offset".
 ** Data is read to or from the buffer pBuf.
@@ -54748,11 +55481,11 @@ static int copyPayload(
 ** The content being read or written might appear on the main page
 ** or be scattered out on multiple overflow pages.
 **
-** If the BtCursor.isIncrblobHandle flag is set, and the current
-** cursor entry uses one or more overflow pages, this function
-** allocates space for and lazily popluates the overflow page-list 
-** cache array (BtCursor.aOverflow). Subsequent calls use this
-** cache to make seeking to the supplied offset more efficient.
+** If the current cursor entry uses one or more overflow pages and the
+** eOp argument is not 2, this function may allocate space for and lazily 
+** popluates the overflow page-list cache array (BtCursor.aOverflow). 
+** Subsequent calls use this cache to make seeking to the supplied offset 
+** more efficient.
 **
 ** Once an overflow page-list cache has been allocated, it may be
 ** invalidated if some other cursor writes to the same table, or if
@@ -54776,15 +55509,22 @@ static int accessPayload(
   int iIdx = 0;
   MemPage *pPage = pCur->apPage[pCur->iPage]; /* Btree page of current entry */
   BtShared *pBt = pCur->pBt;                  /* Btree this cursor belongs to */
+#ifdef SQLITE_DIRECT_OVERFLOW_READ
+  int bEnd;                                   /* True if reading to end of data */
+#endif
 
   assert( pPage );
   assert( pCur->eState==CURSOR_VALID );
   assert( pCur->aiIdx[pCur->iPage]<pPage->nCell );
   assert( cursorHoldsMutex(pCur) );
+  assert( eOp!=2 || offset==0 );      /* Always start from beginning for eOp==2 */
 
   getCellInfo(pCur);
   aPayload = pCur->info.pCell + pCur->info.nHeader;
   nKey = (pPage->intKey ? 0 : (int)pCur->info.nKey);
+#ifdef SQLITE_DIRECT_OVERFLOW_READ
+  bEnd = (offset+amt==nKey+pCur->info.nData);
+#endif
 
   if( NEVER(offset+amt > nKey+pCur->info.nData) 
    || &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize]
@@ -54799,7 +55539,7 @@ static int accessPayload(
     if( a+offset>pCur->info.nLocal ){
       a = pCur->info.nLocal - offset;
     }
-    rc = copyPayload(&aPayload[offset], pBuf, a, eOp, pPage->pDbPage);
+    rc = copyPayload(&aPayload[offset], pBuf, a, (eOp & 0x01), pPage->pDbPage);
     offset = 0;
     pBuf += a;
     amt -= a;
@@ -54813,21 +55553,30 @@ static int accessPayload(
 
     nextPage = get4byte(&aPayload[pCur->info.nLocal]);
 
-#ifndef SQLITE_OMIT_INCRBLOB
-    /* If the isIncrblobHandle flag is set and the BtCursor.aOverflow[]
-    ** has not been allocated, allocate it now. The array is sized at
-    ** one entry for each overflow page in the overflow chain. The
-    ** page number of the first overflow page is stored in aOverflow[0],
-    ** etc. A value of 0 in the aOverflow[] array means "not yet known"
-    ** (the cache is lazily populated).
+    /* If the BtCursor.aOverflow[] has not been allocated, allocate it now.
+    ** Except, do not allocate aOverflow[] for eOp==2.
+    **
+    ** The aOverflow[] array is sized at one entry for each overflow page
+    ** in the overflow chain. The page number of the first overflow page is
+    ** stored in aOverflow[0], etc. A value of 0 in the aOverflow[] array
+    ** means "not yet known" (the cache is lazily populated).
     */
-    if( pCur->isIncrblobHandle && !pCur->aOverflow ){
+    if( eOp!=2 && (pCur->curFlags & BTCF_ValidOvfl)==0 ){
       int nOvfl = (pCur->info.nPayload-pCur->info.nLocal+ovflSize-1)/ovflSize;
-      pCur->aOverflow = (Pgno *)sqlite3MallocZero(sizeof(Pgno)*nOvfl);
-      /* nOvfl is always positive.  If it were zero, fetchPayload would have
-      ** been used instead of this routine. */
-      if( ALWAYS(nOvfl) && !pCur->aOverflow ){
-        rc = SQLITE_NOMEM;
+      if( nOvfl>pCur->nOvflAlloc ){
+        Pgno *aNew = (Pgno*)sqlite3DbRealloc(
+            pCur->pBtree->db, pCur->aOverflow, nOvfl*2*sizeof(Pgno)
+        );
+        if( aNew==0 ){
+          rc = SQLITE_NOMEM;
+        }else{
+          pCur->nOvflAlloc = nOvfl*2;
+          pCur->aOverflow = aNew;
+        }
+      }
+      if( rc==SQLITE_OK ){
+        memset(pCur->aOverflow, 0, nOvfl*sizeof(Pgno));
+        pCur->curFlags |= BTCF_ValidOvfl;
       }
     }
 
@@ -54835,22 +55584,19 @@ static int accessPayload(
     ** entry for the first required overflow page is valid, skip
     ** directly to it.
     */
-    if( pCur->aOverflow && pCur->aOverflow[offset/ovflSize] ){
+    if( (pCur->curFlags & BTCF_ValidOvfl)!=0 && pCur->aOverflow[offset/ovflSize] ){
       iIdx = (offset/ovflSize);
       nextPage = pCur->aOverflow[iIdx];
       offset = (offset%ovflSize);
     }
-#endif
 
     for( ; rc==SQLITE_OK && amt>0 && nextPage; iIdx++){
 
-#ifndef SQLITE_OMIT_INCRBLOB
       /* If required, populate the overflow page-list cache. */
-      if( pCur->aOverflow ){
+      if( (pCur->curFlags & BTCF_ValidOvfl)!=0 ){
         assert(!pCur->aOverflow[iIdx] || pCur->aOverflow[iIdx]==nextPage);
         pCur->aOverflow[iIdx] = nextPage;
       }
-#endif
 
       if( offset>=ovflSize ){
         /* The only reason to read this page is to obtain the page
@@ -54858,13 +55604,17 @@ static int accessPayload(
         ** data is not required. So first try to lookup the overflow
         ** page-list cache, if any, then fall back to the getOverflowPage()
         ** function.
+        **
+        ** Note that the aOverflow[] array must be allocated because eOp!=2
+        ** here.  If eOp==2, then offset==0 and this branch is never taken.
         */
-#ifndef SQLITE_OMIT_INCRBLOB
-        if( pCur->aOverflow && pCur->aOverflow[iIdx+1] ){
+        assert( eOp!=2 );
+        assert( pCur->curFlags & BTCF_ValidOvfl );
+        if( pCur->aOverflow[iIdx+1] ){
           nextPage = pCur->aOverflow[iIdx+1];
-        } else 
-#endif
+        }else{
           rc = getOverflowPage(pBt, nextPage, 0, &nextPage);
+        }
         offset -= ovflSize;
       }else{
         /* Need to read this page properly. It contains some of the
@@ -54886,13 +55636,15 @@ static int accessPayload(
         **   3) the database is file-backed, and
         **   4) there is no open write-transaction, and
         **   5) the database is not a WAL database,
+        **   6) all data from the page is being read.
         **
         ** then data can be read directly from the database file into the
         ** output buffer, bypassing the page-cache altogether. This speeds
         ** up loading large records that span many overflow pages.
         */
-        if( eOp==0                                             /* (1) */
+        if( (eOp&0x01)==0                                      /* (1) */
          && offset==0                                          /* (2) */
+         && (bEnd || a==ovflSize)                              /* (6) */
          && pBt->inTransaction==TRANS_READ                     /* (4) */
          && (fd = sqlite3PagerFile(pBt->pPager))->pMethods     /* (3) */
          && pBt->pPage1->aData[19]==0x01                       /* (5) */
@@ -54909,12 +55661,12 @@ static int accessPayload(
         {
           DbPage *pDbPage;
           rc = sqlite3PagerAcquire(pBt->pPager, nextPage, &pDbPage,
-              (eOp==0 ? PAGER_GET_READONLY : 0)
+              ((eOp&0x01)==0 ? PAGER_GET_READONLY : 0)
           );
           if( rc==SQLITE_OK ){
             aPayload = sqlite3PagerGetData(pDbPage);
             nextPage = get4byte(aPayload);
-            rc = copyPayload(&aPayload[offset+4], pBuf, a, eOp, pDbPage);
+            rc = copyPayload(&aPayload[offset+4], pBuf, a, (eOp&0x01), pDbPage);
             sqlite3PagerUnref(pDbPage);
             offset = 0;
           }
@@ -55008,10 +55760,7 @@ static const void *fetchPayload(
   assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
   assert( cursorHoldsMutex(pCur) );
   assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell );
-  if( pCur->info.nSize==0 ){
-    btreeParseCell(pCur->apPage[pCur->iPage], pCur->aiIdx[pCur->iPage],
-                   &pCur->info);
-  }
+  assert( pCur->info.nSize>0 );
   *pAmt = pCur->info.nLocal;
   return (void*)(pCur->info.pCell + pCur->info.nHeader);
 }
@@ -55062,14 +55811,14 @@ static int moveToChild(BtCursor *pCur, u32 newPgno){
     return SQLITE_CORRUPT_BKPT;
   }
   rc = getAndInitPage(pBt, newPgno, &pNewPage,
-               pCur->wrFlag==0 ? PAGER_GET_READONLY : 0);
+               (pCur->curFlags & BTCF_WriteFlag)==0 ? PAGER_GET_READONLY : 0);
   if( rc ) return rc;
   pCur->apPage[i+1] = pNewPage;
   pCur->aiIdx[i+1] = 0;
   pCur->iPage++;
 
   pCur->info.nSize = 0;
-  pCur->validNKey = 0;
+  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
   if( pNewPage->nCell<1 || pNewPage->intKey!=pCur->apPage[i]->intKey ){
     return SQLITE_CORRUPT_BKPT;
   }
@@ -55127,7 +55876,7 @@ static void moveToParent(BtCursor *pCur){
   releasePage(pCur->apPage[pCur->iPage]);
   pCur->iPage--;
   pCur->info.nSize = 0;
-  pCur->validNKey = 0;
+  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
 }
 
 /*
@@ -55174,7 +55923,7 @@ static int moveToRoot(BtCursor *pCur){
     return SQLITE_OK;
   }else{
     rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->apPage[0],
-                        pCur->wrFlag==0 ? PAGER_GET_READONLY : 0);
+                 (pCur->curFlags & BTCF_WriteFlag)==0 ? PAGER_GET_READONLY : 0);
     if( rc!=SQLITE_OK ){
       pCur->eState = CURSOR_INVALID;
       return rc;
@@ -55201,8 +55950,7 @@ static int moveToRoot(BtCursor *pCur){
 
   pCur->aiIdx[0] = 0;
   pCur->info.nSize = 0;
-  pCur->atLast = 0;
-  pCur->validNKey = 0;
+  pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidNKey|BTCF_ValidOvfl);
 
   if( pRoot->nCell>0 ){
     pCur->eState = CURSOR_VALID;
@@ -55265,7 +56013,7 @@ static int moveToRightmost(BtCursor *pCur){
   if( rc==SQLITE_OK ){
     pCur->aiIdx[pCur->iPage] = pPage->nCell-1;
     pCur->info.nSize = 0;
-    pCur->validNKey = 0;
+    pCur->curFlags &= ~BTCF_ValidNKey;
   }
   return rc;
 }
@@ -55304,7 +56052,7 @@ SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor *pCur, int *pRes){
   assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
 
   /* If the cursor already points to the last entry, this is a no-op. */
-  if( CURSOR_VALID==pCur->eState && pCur->atLast ){
+  if( CURSOR_VALID==pCur->eState && (pCur->curFlags & BTCF_AtLast)!=0 ){
 #ifdef SQLITE_DEBUG
     /* This block serves to assert() that the cursor really does point 
     ** to the last entry in the b-tree. */
@@ -55327,7 +56075,12 @@ SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor *pCur, int *pRes){
       assert( pCur->eState==CURSOR_VALID );
       *pRes = 0;
       rc = moveToRightmost(pCur);
-      pCur->atLast = rc==SQLITE_OK ?1:0;
+      if( rc==SQLITE_OK ){
+        pCur->curFlags |= BTCF_AtLast;
+      }else{
+        pCur->curFlags &= ~BTCF_AtLast;
+      }
+   
     }
   }
   return rc;
@@ -55378,14 +56131,14 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
 
   /* If the cursor is already positioned at the point we are trying
   ** to move to, then just return without doing any work */
-  if( pCur->eState==CURSOR_VALID && pCur->validNKey 
+  if( pCur->eState==CURSOR_VALID && (pCur->curFlags & BTCF_ValidNKey)!=0
    && pCur->apPage[0]->intKey 
   ){
     if( pCur->info.nKey==intKey ){
       *pRes = 0;
       return SQLITE_OK;
     }
-    if( pCur->atLast && pCur->info.nKey<intKey ){
+    if( (pCur->curFlags & BTCF_AtLast)!=0 && pCur->info.nKey<intKey ){
       *pRes = -1;
       return SQLITE_OK;
     }
@@ -55393,6 +56146,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
 
   if( pIdxKey ){
     xRecordCompare = sqlite3VdbeFindCompare(pIdxKey);
+    pIdxKey->isCorrupt = 0;
     assert( pIdxKey->default_rc==1 
          || pIdxKey->default_rc==0 
          || pIdxKey->default_rc==-1
@@ -55451,7 +56205,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
           if( lwr>upr ){ c = +1; break; }
         }else{
           assert( nCellKey==intKey );
-          pCur->validNKey = 1;
+          pCur->curFlags |= BTCF_ValidNKey;
           pCur->info.nKey = nCellKey;
           pCur->aiIdx[pCur->iPage] = (u16)idx;
           if( !pPage->leaf ){
@@ -55508,7 +56262,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
             goto moveto_finish;
           }
           pCur->aiIdx[pCur->iPage] = (u16)idx;
-          rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 0);
+          rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 2);
           if( rc ){
             sqlite3_free(pCellKey);
             goto moveto_finish;
@@ -55516,6 +56270,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
           c = xRecordCompare(nCell, pCellKey, pIdxKey, 0);
           sqlite3_free(pCellKey);
         }
+        assert( pIdxKey->isCorrupt==0 || c==0 );
         if( c<0 ){
           lwr = idx+1;
         }else if( c>0 ){
@@ -55525,6 +56280,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
           *pRes = 0;
           rc = SQLITE_OK;
           pCur->aiIdx[pCur->iPage] = (u16)idx;
+          if( pIdxKey->isCorrupt ) rc = SQLITE_CORRUPT;
           goto moveto_finish;
         }
         if( lwr>upr ) break;
@@ -55553,7 +56309,7 @@ moveto_next_layer:
   }
 moveto_finish:
   pCur->info.nSize = 0;
-  pCur->validNKey = 0;
+  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
   return rc;
 }
 
@@ -55598,6 +56354,7 @@ SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){
   assert( *pRes==0 || *pRes==1 );
   assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID );
   if( pCur->eState!=CURSOR_VALID ){
+    invalidateOverflowCache(pCur);
     rc = restoreCursorPosition(pCur);
     if( rc!=SQLITE_OK ){
       *pRes = 0;
@@ -55631,7 +56388,7 @@ SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){
   testcase( idx>pPage->nCell );
 
   pCur->info.nSize = 0;
-  pCur->validNKey = 0;
+  pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
   if( idx>=pPage->nCell ){
     if( !pPage->leaf ){
       rc = moveToChild(pCur, get4byte(&pPage->aData[pPage->hdrOffset+8]));
@@ -55692,7 +56449,7 @@ SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int *pRes){
   assert( pRes!=0 );
   assert( *pRes==0 || *pRes==1 );
   assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID );
-  pCur->atLast = 0;
+  pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidOvfl);
   if( pCur->eState!=CURSOR_VALID ){
     if( ALWAYS(pCur->eState>=CURSOR_REQUIRESEEK) ){
       rc = btreeRestoreCursorPosition(pCur);
@@ -55737,7 +56494,7 @@ SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int *pRes){
       moveToParent(pCur);
     }
     pCur->info.nSize = 0;
-    pCur->validNKey = 0;
+    pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
 
     pCur->aiIdx[pCur->iPage]--;
     pPage = pCur->apPage[pCur->iPage];
@@ -56527,7 +57284,8 @@ static void insertCell(
   if( *pRC ) return;
 
   assert( i>=0 && i<=pPage->nCell+pPage->nOverflow );
-  assert( pPage->nCell<=MX_CELL(pPage->pBt) && MX_CELL(pPage->pBt)<=10921 );
+  assert( MX_CELL(pPage->pBt)<=10921 );
+  assert( pPage->nCell<=MX_CELL(pPage->pBt) || CORRUPT_DB );
   assert( pPage->nOverflow<=ArraySize(pPage->apOvfl) );
   assert( ArraySize(pPage->apOvfl)==ArraySize(pPage->aiOvfl) );
   assert( sqlite3_mutex_held(pPage->pBt->mutex) );
@@ -57762,7 +58520,7 @@ SQLITE_PRIVATE int sqlite3BtreeInsert(
   }
 
   assert( cursorHoldsMutex(pCur) );
-  assert( pCur->wrFlag && pBt->inTransaction==TRANS_WRITE
+  assert( (pCur->curFlags & BTCF_WriteFlag)!=0 && pBt->inTransaction==TRANS_WRITE
               && (pBt->btsFlags & BTS_READ_ONLY)==0 );
   assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) );
 
@@ -57795,7 +58553,7 @@ SQLITE_PRIVATE int sqlite3BtreeInsert(
     /* If the cursor is currently on the last row and we are appending a
     ** new row onto the end, set the "loc" to avoid an unnecessary btreeMoveto()
     ** call */
-    if( pCur->validNKey && nKey>0 && pCur->info.nKey==nKey-1 ){
+    if( (pCur->curFlags&BTCF_ValidNKey)!=0 && nKey>0 && pCur->info.nKey==nKey-1 ){
       loc = -1;
     }
   }
@@ -57848,7 +58606,7 @@ SQLITE_PRIVATE int sqlite3BtreeInsert(
 
   /* If no error has occurred and pPage has an overflow cell, call balance() 
   ** to redistribute the cells within the tree. Since balance() may move
-  ** the cursor, zero the BtCursor.info.nSize and BtCursor.validNKey
+  ** the cursor, zero the BtCursor.info.nSize and BTCF_ValidNKey
   ** variables.
   **
   ** Previous versions of SQLite called moveToRoot() to move the cursor
@@ -57868,7 +58626,7 @@ SQLITE_PRIVATE int sqlite3BtreeInsert(
   */
   pCur->info.nSize = 0;
   if( rc==SQLITE_OK && pPage->nOverflow ){
-    pCur->validNKey = 0;
+    pCur->curFlags &= ~(BTCF_ValidNKey);
     rc = balance(pCur);
 
     /* Must make sure nOverflow is reset to zero even if the balance()
@@ -57900,7 +58658,7 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur){
   assert( cursorHoldsMutex(pCur) );
   assert( pBt->inTransaction==TRANS_WRITE );
   assert( (pBt->btsFlags & BTS_READ_ONLY)==0 );
-  assert( pCur->wrFlag );
+  assert( pCur->curFlags & BTCF_WriteFlag );
   assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) );
   assert( !hasReadConflicts(p, pCur->pgnoRoot) );
 
@@ -58246,6 +59004,15 @@ SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree *p, int iTable, int *pnChange){
 }
 
 /*
+** Delete all information from the single table that pCur is open on.
+**
+** This routine only work for pCur on an ephemeral table.
+*/
+SQLITE_PRIVATE int sqlite3BtreeClearTableOfCursor(BtCursor *pCur){
+  return sqlite3BtreeClearTable(pCur->pBtree, pCur->pgnoRoot, 0);
+}
+
+/*
 ** Erase all information in a table and add the root of the table to
 ** the freelist.  Except, the root of the principle table (the one on
 ** page 1) is never added to the freelist.
@@ -59204,7 +59971,7 @@ SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor *pCsr, u32 offset, u32 amt, void
   int rc;
   assert( cursorHoldsMutex(pCsr) );
   assert( sqlite3_mutex_held(pCsr->pBtree->db->mutex) );
-  assert( pCsr->isIncrblobHandle );
+  assert( pCsr->curFlags & BTCF_Incrblob );
 
   rc = restoreCursorPosition(pCsr);
   if( rc!=SQLITE_OK ){
@@ -59233,7 +60000,7 @@ SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor *pCsr, u32 offset, u32 amt, void
   **   (d) there are no conflicting read-locks, and
   **   (e) the cursor points at a valid row of an intKey table.
   */
-  if( !pCsr->wrFlag ){
+  if( (pCsr->curFlags & BTCF_WriteFlag)==0 ){
     return SQLITE_READONLY;
   }
   assert( (pCsr->pBt->btsFlags & BTS_READ_ONLY)==0
@@ -59246,20 +60013,10 @@ SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor *pCsr, u32 offset, u32 amt, void
 }
 
 /* 
-** Set a flag on this cursor to cache the locations of pages from the 
-** overflow list for the current row. This is used by cursors opened
-** for incremental blob IO only.
-**
-** This function sets a flag only. The actual page location cache
-** (stored in BtCursor.aOverflow[]) is allocated and used by function
-** accessPayload() (the worker function for sqlite3BtreeData() and
-** sqlite3BtreePutData()).
+** Mark this cursor as an incremental blob cursor.
 */
-SQLITE_PRIVATE void sqlite3BtreeCacheOverflow(BtCursor *pCur){
-  assert( cursorHoldsMutex(pCur) );
-  assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
-  invalidateOverflowCache(pCur);
-  pCur->isIncrblobHandle = 1;
+SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *pCur){
+  pCur->curFlags |= BTCF_Incrblob;
 }
 #endif
 
@@ -59308,6 +60065,13 @@ SQLITE_PRIVATE void sqlite3BtreeCursorHints(BtCursor *pCsr, unsigned int mask){
   pCsr->hints = mask;
 }
 
+/*
+** Return true if the given Btree is read-only.
+*/
+SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *p){
+  return (p->pBt->btsFlags & BTS_READ_ONLY)!=0;
+}
+
 /************** End of btree.c ***********************************************/
 /************** Begin file backup.c ******************************************/
 /*
@@ -61212,6 +61976,68 @@ SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void){
 }
 
 /*
+** Attempt to extract a value from pExpr and use it to construct *ppVal.
+**
+** If pAlloc is not NULL, then an UnpackedRecord object is created for
+** pAlloc if one does not exist and the new value is added to the
+** UnpackedRecord object.
+**
+** A value is extracted in the following cases:
+**
+**  * (pExpr==0). In this case the value is assumed to be an SQL NULL,
+**
+**  * The expression is a bound variable, and this is a reprepare, or
+**
+**  * The expression is a literal value.
+**
+** On success, *ppVal is made to point to the extracted value.  The caller
+** is responsible for ensuring that the value is eventually freed.
+*/
+static int stat4ValueFromExpr(
+  Parse *pParse,                  /* Parse context */
+  Expr *pExpr,                    /* The expression to extract a value from */
+  u8 affinity,                    /* Affinity to use */
+  struct ValueNewStat4Ctx *pAlloc,/* How to allocate space.  Or NULL */
+  sqlite3_value **ppVal           /* OUT: New value object (or NULL) */
+){
+  int rc = SQLITE_OK;
+  sqlite3_value *pVal = 0;
+  sqlite3 *db = pParse->db;
+
+  /* Skip over any TK_COLLATE nodes */
+  pExpr = sqlite3ExprSkipCollate(pExpr);
+
+  if( !pExpr ){
+    pVal = valueNew(db, pAlloc);
+    if( pVal ){
+      sqlite3VdbeMemSetNull((Mem*)pVal);
+    }
+  }else if( pExpr->op==TK_VARIABLE
+        || NEVER(pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE)
+  ){
+    Vdbe *v;
+    int iBindVar = pExpr->iColumn;
+    sqlite3VdbeSetVarmask(pParse->pVdbe, iBindVar);
+    if( (v = pParse->pReprepare)!=0 ){
+      pVal = valueNew(db, pAlloc);
+      if( pVal ){
+        rc = sqlite3VdbeMemCopy((Mem*)pVal, &v->aVar[iBindVar-1]);
+        if( rc==SQLITE_OK ){
+          sqlite3ValueApplyAffinity(pVal, affinity, ENC(db));
+        }
+        pVal->db = pParse->db;
+      }
+    }
+  }else{
+    rc = valueFromExpr(db, pExpr, ENC(db), affinity, &pVal, pAlloc);
+  }
+
+  assert( pVal==0 || pVal->db==db );
+  *ppVal = pVal;
+  return rc;
+}
+
+/*
 ** This function is used to allocate and populate UnpackedRecord 
 ** structures intended to be compared against sample index keys stored 
 ** in the sqlite_stat4 table.
@@ -61250,51 +62076,89 @@ SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(
   int iVal,                       /* Array element to populate */
   int *pbOk                       /* OUT: True if value was extracted */
 ){
-  int rc = SQLITE_OK;
+  int rc;
   sqlite3_value *pVal = 0;
-  sqlite3 *db = pParse->db;
-
-
   struct ValueNewStat4Ctx alloc;
+
   alloc.pParse = pParse;
   alloc.pIdx = pIdx;
   alloc.ppRec = ppRec;
   alloc.iVal = iVal;
 
-  /* Skip over any TK_COLLATE nodes */
-  pExpr = sqlite3ExprSkipCollate(pExpr);
-
-  if( !pExpr ){
-    pVal = valueNew(db, &alloc);
-    if( pVal ){
-      sqlite3VdbeMemSetNull((Mem*)pVal);
-    }
-  }else if( pExpr->op==TK_VARIABLE
-        || NEVER(pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE)
-  ){
-    Vdbe *v;
-    int iBindVar = pExpr->iColumn;
-    sqlite3VdbeSetVarmask(pParse->pVdbe, iBindVar);
-    if( (v = pParse->pReprepare)!=0 ){
-      pVal = valueNew(db, &alloc);
-      if( pVal ){
-        rc = sqlite3VdbeMemCopy((Mem*)pVal, &v->aVar[iBindVar-1]);
-        if( rc==SQLITE_OK ){
-          sqlite3ValueApplyAffinity(pVal, affinity, ENC(db));
-        }
-        pVal->db = pParse->db;
-      }
-    }
-  }else{
-    rc = valueFromExpr(db, pExpr, ENC(db), affinity, &pVal, &alloc);
-  }
+  rc = stat4ValueFromExpr(pParse, pExpr, affinity, &alloc, &pVal);
+  assert( pVal==0 || pVal->db==pParse->db );
   *pbOk = (pVal!=0);
-
-  assert( pVal==0 || pVal->db==db );
   return rc;
 }
 
 /*
+** Attempt to extract a value from expression pExpr using the methods
+** as described for sqlite3Stat4ProbeSetValue() above. 
+**
+** If successful, set *ppVal to point to a new value object and return 
+** SQLITE_OK. If no value can be extracted, but no other error occurs
+** (e.g. OOM), return SQLITE_OK and set *ppVal to NULL. Or, if an error
+** does occur, return an SQLite error code. The final value of *ppVal
+** is undefined in this case.
+*/
+SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(
+  Parse *pParse,                  /* Parse context */
+  Expr *pExpr,                    /* The expression to extract a value from */
+  u8 affinity,                    /* Affinity to use */
+  sqlite3_value **ppVal           /* OUT: New value object (or NULL) */
+){
+  return stat4ValueFromExpr(pParse, pExpr, affinity, 0, ppVal);
+}
+
+/*
+** Extract the iCol-th column from the nRec-byte record in pRec.  Write
+** the column value into *ppVal.  If *ppVal is initially NULL then a new
+** sqlite3_value object is allocated.
+**
+** If *ppVal is initially NULL then the caller is responsible for 
+** ensuring that the value written into *ppVal is eventually freed.
+*/
+SQLITE_PRIVATE int sqlite3Stat4Column(
+  sqlite3 *db,                    /* Database handle */
+  const void *pRec,               /* Pointer to buffer containing record */
+  int nRec,                       /* Size of buffer pRec in bytes */
+  int iCol,                       /* Column to extract */
+  sqlite3_value **ppVal           /* OUT: Extracted value */
+){
+  u32 t;                          /* a column type code */
+  int nHdr;                       /* Size of the header in the record */
+  int iHdr;                       /* Next unread header byte */
+  int iField;                     /* Next unread data byte */
+  int szField;                    /* Size of the current data field */
+  int i;                          /* Column index */
+  u8 *a = (u8*)pRec;              /* Typecast byte array */
+  Mem *pMem = *ppVal;             /* Write result into this Mem object */
+
+  assert( iCol>0 );
+  iHdr = getVarint32(a, nHdr);
+  if( nHdr>nRec || iHdr>=nHdr ) return SQLITE_CORRUPT_BKPT;
+  iField = nHdr;
+  for(i=0; i<=iCol; i++){
+    iHdr += getVarint32(&a[iHdr], t);
+    testcase( iHdr==nHdr );
+    testcase( iHdr==nHdr+1 );
+    if( iHdr>nHdr ) return SQLITE_CORRUPT_BKPT;
+    szField = sqlite3VdbeSerialTypeLen(t);
+    iField += szField;
+  }
+  testcase( iField==nRec );
+  testcase( iField==nRec+1 );
+  if( iField>nRec ) return SQLITE_CORRUPT_BKPT;
+  if( pMem==0 ){
+    pMem = *ppVal = sqlite3ValueNew(db);
+    if( pMem==0 ) return SQLITE_NOMEM;
+  }
+  sqlite3VdbeSerialGet(&a[iField-szField], t, pMem);
+  pMem->enc = ENC(db);
+  return SQLITE_OK;
+}
+
+/*
 ** Unless it is NULL, the argument must be an UnpackedRecord object returned
 ** by an earlier call to sqlite3Stat4ProbeSetValue(). This call deletes
 ** the object.
@@ -61438,18 +62302,35 @@ SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe *pA, Vdbe *pB){
 }
 
 /*
-** Resize the Vdbe.aOp array so that it is at least one op larger than 
-** it was.
+** Resize the Vdbe.aOp array so that it is at least nOp elements larger 
+** than its current size. nOp is guaranteed to be less than or equal
+** to 1024/sizeof(Op).
 **
 ** If an out-of-memory error occurs while resizing the array, return
-** SQLITE_NOMEM. In this case Vdbe.aOp and Vdbe.nOpAlloc remain 
+** SQLITE_NOMEM. In this case Vdbe.aOp and Parse.nOpAlloc remain 
 ** unchanged (this is so that any opcodes already allocated can be 
 ** correctly deallocated along with the rest of the Vdbe).
 */
-static int growOpArray(Vdbe *v){
+static int growOpArray(Vdbe *v, int nOp){
   VdbeOp *pNew;
   Parse *p = v->pParse;
+
+  /* The SQLITE_TEST_REALLOC_STRESS compile-time option is designed to force
+  ** more frequent reallocs and hence provide more opportunities for 
+  ** simulated OOM faults.  SQLITE_TEST_REALLOC_STRESS is generally used
+  ** during testing only.  With SQLITE_TEST_REALLOC_STRESS grow the op array
+  ** by the minimum* amount required until the size reaches 512.  Normal
+  ** operation (without SQLITE_TEST_REALLOC_STRESS) is to double the current
+  ** size of the op array or add 1KB of space, whichever is smaller. */
+#ifdef SQLITE_TEST_REALLOC_STRESS
+  int nNew = (p->nOpAlloc>=512 ? p->nOpAlloc*2 : p->nOpAlloc+nOp);
+#else
   int nNew = (p->nOpAlloc ? p->nOpAlloc*2 : (int)(1024/sizeof(Op)));
+  UNUSED_PARAMETER(nOp);
+#endif
+
+  assert( nOp<=(1024/sizeof(Op)) );
+  assert( nNew>=(p->nOpAlloc+nOp) );
   pNew = sqlite3DbRealloc(p->db, v->aOp, nNew*sizeof(Op));
   if( pNew ){
     p->nOpAlloc = sqlite3DbMallocSize(p->db, pNew)/sizeof(Op);
@@ -61493,7 +62374,7 @@ SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe *p, int op, int p1, int p2, int p3){
   assert( p->magic==VDBE_MAGIC_INIT );
   assert( op>0 && op<0xff );
   if( p->pParse->nOpAlloc<=i ){
-    if( growOpArray(p) ){
+    if( growOpArray(p, 1) ){
       return 1;
     }
   }
@@ -61630,7 +62511,7 @@ SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe *v, int x){
   int j = -1-x;
   assert( v->magic==VDBE_MAGIC_INIT );
   assert( j<p->nLabel );
-  if( j>=0 && p->aLabel ){
+  if( ALWAYS(j>=0) && p->aLabel ){
     p->aLabel[j] = v->nOp;
   }
   p->iFixedOp = v->nOp - 1;
@@ -61853,7 +62734,7 @@ static void resolveP2Values(Vdbe *p, int *pMaxFuncArgs){
   pParse->aLabel = 0;
   pParse->nLabel = 0;
   *pMaxFuncArgs = nMaxArgs;
-  assert( p->bIsReader!=0 || p->btreeMask==0 );
+  assert( p->bIsReader!=0 || DbMaskAllZero(p->btreeMask) );
 }
 
 /*
@@ -61880,7 +62761,7 @@ SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe *p, int *pnOp, int *pnMaxArg)
   assert( aOp && !p->db->mallocFailed );
 
   /* Check that sqlite3VdbeUsesBtree() was not called on this VM */
-  assert( p->btreeMask==0 );
+  assert( DbMaskAllZero(p->btreeMask) );
 
   resolveP2Values(p, pnMaxArg);
   *pnOp = p->nOp;
@@ -61895,7 +62776,7 @@ SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe *p, int *pnOp, int *pnMaxArg)
 SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe *p, int nOp, VdbeOpList const *aOp, int iLineno){
   int addr;
   assert( p->magic==VDBE_MAGIC_INIT );
-  if( p->nOp + nOp > p->pParse->nOpAlloc && growOpArray(p) ){
+  if( p->nOp + nOp > p->pParse->nOpAlloc && growOpArray(p, nOp) ){
     return 0;
   }
   addr = p->nOp;
@@ -62080,7 +62961,7 @@ SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *pVdbe, SubProgram *p){
 ** Change the opcode at addr into OP_Noop
 */
 SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe *p, int addr){
-  if( p->aOp ){
+  if( addr<p->nOp ){
     VdbeOp *pOp = &p->aOp[addr];
     sqlite3 *db = p->db;
     freeP4(db, pOp->p4type, pOp->p4.p);
@@ -62137,7 +63018,9 @@ SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe *p, int addr, const char *zP4, int
     addr = p->nOp - 1;
   }
   pOp = &p->aOp[addr];
-  assert( pOp->p4type==P4_NOTUSED || pOp->p4type==P4_INT32 );
+  assert( pOp->p4type==P4_NOTUSED
+       || pOp->p4type==P4_INT32
+       || pOp->p4type==P4_KEYINFO );
   freeP4(db, pOp->p4type, pOp->p4.p);
   pOp->p4.p = 0;
   if( n==P4_INT32 ){
@@ -62463,9 +63346,9 @@ static char *displayP4(Op *pOp, char *zTemp, int nTemp){
 SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe *p, int i){
   assert( i>=0 && i<p->db->nDb && i<(int)sizeof(yDbMask)*8 );
   assert( i<(int)sizeof(p->btreeMask)*8 );
-  p->btreeMask |= ((yDbMask)1)<<i;
+  DbMaskSet(p->btreeMask, i);
   if( i!=1 && sqlite3BtreeSharable(p->db->aDb[i].pBt) ){
-    p->lockMask |= ((yDbMask)1)<<i;
+    DbMaskSet(p->lockMask, i);
   }
 }
 
@@ -62493,16 +63376,15 @@ SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe *p, int i){
 */
 SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe *p){
   int i;
-  yDbMask mask;
   sqlite3 *db;
   Db *aDb;
   int nDb;
-  if( p->lockMask==0 ) return;  /* The common case */
+  if( DbMaskAllZero(p->lockMask) ) return;  /* The common case */
   db = p->db;
   aDb = db->aDb;
   nDb = db->nDb;
-  for(i=0, mask=1; i<nDb; i++, mask += mask){
-    if( i!=1 && (mask & p->lockMask)!=0 && ALWAYS(aDb[i].pBt!=0) ){
+  for(i=0; i<nDb; i++){
+    if( i!=1 && DbMaskTest(p->lockMask,i) && ALWAYS(aDb[i].pBt!=0) ){
       sqlite3BtreeEnter(aDb[i].pBt);
     }
   }
@@ -62515,16 +63397,15 @@ SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe *p){
 */
 SQLITE_PRIVATE void sqlite3VdbeLeave(Vdbe *p){
   int i;
-  yDbMask mask;
   sqlite3 *db;
   Db *aDb;
   int nDb;
-  if( p->lockMask==0 ) return;  /* The common case */
+  if( DbMaskAllZero(p->lockMask) ) return;  /* The common case */
   db = p->db;
   aDb = db->aDb;
   nDb = db->nDb;
-  for(i=0, mask=1; i<nDb; i++, mask += mask){
-    if( i!=1 && (mask & p->lockMask)!=0 && ALWAYS(aDb[i].pBt!=0) ){
+  for(i=0; i<nDb; i++){
+    if( i!=1 && DbMaskTest(p->lockMask,i) && ALWAYS(aDb[i].pBt!=0) ){
       sqlite3BtreeLeave(aDb[i].pBt);
     }
   }
@@ -63495,7 +64376,7 @@ static void checkActiveVdbeCnt(sqlite3 *db){
   int nRead = 0;
   p = db->pVdbe;
   while( p ){
-    if( p->magic==VDBE_MAGIC_RUN && p->pc>=0 ){
+    if( sqlite3_stmt_busy((sqlite3_stmt*)p) ){
       cnt++;
       if( p->readOnly==0 ) nWrite++;
       if( p->bIsReader ) nRead++;
@@ -63655,7 +64536,6 @@ SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe *p){
 
     /* Check for one of the special errors */
     mrc = p->rc & 0xff;
-    assert( p->rc!=SQLITE_IOERR_BLOCKED );  /* This error no longer exists */
     isSpecialError = mrc==SQLITE_NOMEM || mrc==SQLITE_IOERR
                      || mrc==SQLITE_INTERRUPT || mrc==SQLITE_FULL;
     if( isSpecialError ){
@@ -64087,7 +64967,7 @@ SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor *p){
     if( rc ) return rc;
     if( hasMoved ){
       p->cacheStatus = CACHE_STALE;
-      p->nullRow = 1;
+      if( hasMoved==2 ) p->nullRow = 1;
     }
   }
   return SQLITE_OK;
@@ -64140,7 +65020,7 @@ SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor *p){
 */
 SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem *pMem, int file_format){
   int flags = pMem->flags;
-  int n;
+  u32 n;
 
   if( flags&MEM_Null ){
     return 0;
@@ -64170,11 +65050,11 @@ SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem *pMem, int file_format){
     return 7;
   }
   assert( pMem->db->mallocFailed || flags&(MEM_Str|MEM_Blob) );
-  n = pMem->n;
+  assert( pMem->n>=0 );
+  n = (u32)pMem->n;
   if( flags & MEM_Zero ){
     n += pMem->u.nZero;
   }
-  assert( n>=0 );
   return ((n*2) + 12 + ((flags&MEM_Str)!=0));
 }
 
@@ -64757,10 +65637,13 @@ static i64 vdbeRecordDecodeInt(u32 serial_type, const u8 *aKey){
 ** Key1 and Key2 do not have to contain the same number of fields. If all 
 ** fields that appear in both keys are equal, then pPKey2->default_rc is 
 ** returned.
+**
+** If database corruption is discovered, set pPKey2->isCorrupt to non-zero
+** and return 0.
 */
 SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
   int nKey1, const void *pKey1,   /* Left key */
-  const UnpackedRecord *pPKey2,   /* Right key */
+  UnpackedRecord *pPKey2,         /* Right key */
   int bSkip                       /* If true, skip the first field */
 ){
   u32 d1;                         /* Offset into aKey[] of next data element */
@@ -64786,7 +65669,10 @@ SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
   }else{
     idx1 = getVarint32(aKey1, szHdr1);
     d1 = szHdr1;
-    if( d1>(unsigned)nKey1 ) return 1;  /* Corruption */
+    if( d1>(unsigned)nKey1 ){ 
+      pPKey2->isCorrupt = (u8)SQLITE_CORRUPT_BKPT;
+      return 0;  /* Corruption */
+    }
     i = 0;
   }
 
@@ -64863,7 +65749,8 @@ SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
         testcase( (d1+mem1.n)==(unsigned)nKey1 );
         testcase( (d1+mem1.n+1)==(unsigned)nKey1 );
         if( (d1+mem1.n) > (unsigned)nKey1 ){
-          rc = 1;                /* Corruption */
+          pPKey2->isCorrupt = (u8)SQLITE_CORRUPT_BKPT;
+          return 0;                /* Corruption */
         }else if( pKeyInfo->aColl[i] ){
           mem1.enc = pKeyInfo->enc;
           mem1.db = pKeyInfo->db;
@@ -64889,7 +65776,8 @@ SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
         testcase( (d1+nStr)==(unsigned)nKey1 );
         testcase( (d1+nStr+1)==(unsigned)nKey1 );
         if( (d1+nStr) > (unsigned)nKey1 ){
-          rc = 1;                /* Corruption */
+          pPKey2->isCorrupt = (u8)SQLITE_CORRUPT_BKPT;
+          return 0;                /* Corruption */
         }else{
           int nCmp = MIN(nStr, pRhs->n);
           rc = memcmp(&aKey1[d1], pRhs->z, nCmp);
@@ -64933,6 +65821,7 @@ SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
   ** value.  */
   assert( CORRUPT_DB 
        || pPKey2->default_rc==vdbeRecordCompareDebug(nKey1, pKey1, pPKey2) 
+       || pKeyInfo->db->mallocFailed
   );
   return pPKey2->default_rc;
 }
@@ -64942,10 +65831,13 @@ SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
 ** that (a) the first field of pPKey2 is an integer, and (b) the 
 ** size-of-header varint at the start of (pKey1/nKey1) fits in a single
 ** byte (i.e. is less than 128).
+**
+** To avoid concerns about buffer overreads, this routine is only used
+** on schemas where the maximum valid header size is 63 bytes or less.
 */
 static int vdbeRecordCompareInt(
   int nKey1, const void *pKey1, /* Left key */
-  const UnpackedRecord *pPKey2, /* Right key */
+  UnpackedRecord *pPKey2,       /* Right key */
   int bSkip                     /* Ignored */
 ){
   const u8 *aKey = &((const u8*)pKey1)[*(const u8*)pKey1 & 0x3F];
@@ -64958,6 +65850,7 @@ static int vdbeRecordCompareInt(
   UNUSED_PARAMETER(bSkip);
 
   assert( bSkip==0 );
+  assert( (*(u8*)pKey1)<=0x3F || CORRUPT_DB );
   switch( serial_type ){
     case 1: { /* 1-byte signed integer */
       lhs = ONE_BYTE_INT(aKey);
@@ -65042,7 +65935,7 @@ static int vdbeRecordCompareInt(
 */
 static int vdbeRecordCompareString(
   int nKey1, const void *pKey1, /* Left key */
-  const UnpackedRecord *pPKey2, /* Right key */
+  UnpackedRecord *pPKey2,       /* Right key */
   int bSkip
 ){
   const u8 *aKey1 = (const u8*)pKey1;
@@ -65063,7 +65956,10 @@ static int vdbeRecordCompareString(
     int szHdr = aKey1[0];
 
     nStr = (serial_type-12) / 2;
-    if( (szHdr + nStr) > nKey1 ) return 0;    /* Corruption */
+    if( (szHdr + nStr) > nKey1 ){
+      pPKey2->isCorrupt = (u8)SQLITE_CORRUPT_BKPT;
+      return 0;    /* Corruption */
+    }
     nCmp = MIN( pPKey2->aMem[0].n, nStr );
     res = memcmp(&aKey1[szHdr], pPKey2->aMem[0].z, nCmp);
 
@@ -65091,6 +65987,7 @@ static int vdbeRecordCompareString(
        || (res<0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)<0)
        || (res>0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)>0)
        || CORRUPT_DB
+       || pPKey2->pKeyInfo->db->mallocFailed
   );
   return res;
 }
@@ -65228,7 +66125,7 @@ idx_rowid_corruption:
 */
 SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(
   VdbeCursor *pC,                  /* The cursor to compare against */
-  const UnpackedRecord *pUnpacked, /* Unpacked version of key */
+  UnpackedRecord *pUnpacked,       /* Unpacked version of key */
   int *res                         /* Write the comparison result here */
 ){
   i64 nCellKey = 0;
@@ -66675,7 +67572,7 @@ SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
 */
 SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt *pStmt){
   Vdbe *v = (Vdbe*)pStmt;
-  return v!=0 && v->pc>0 && v->magic==VDBE_MAGIC_RUN;
+  return v!=0 && v->pc>=0 && v->magic==VDBE_MAGIC_RUN;
 }
 
 /*
@@ -67125,6 +68022,12 @@ SQLITE_API int sqlite3_found_count = 0;
 ** branch can go.  It is usually 2.  "I" is the direction the branch
 ** goes.  0 means falls through.  1 means branch is taken.  2 means the
 ** second alternative branch is taken.
+**
+** iSrcLine is the source code line (from the __LINE__ macro) that
+** generated the VDBE instruction.  This instrumentation assumes that all
+** source code is in a single file (the amalgamation).  Special values 1
+** and 2 for the iSrcLine parameter mean that this particular branch is
+** always taken or never taken, respectively.
 */
 #if !defined(SQLITE_VDBE_COVERAGE)
 # define VdbeBranchTaken(I,M)
@@ -67233,21 +68136,21 @@ static VdbeCursor *allocateCursor(
 ** look like a number, leave it alone.
 */
 static void applyNumericAffinity(Mem *pRec){
-  if( (pRec->flags & (MEM_Real|MEM_Int))==0 ){
-    double rValue;
-    i64 iValue;
-    u8 enc = pRec->enc;
-    if( (pRec->flags&MEM_Str)==0 ) return;
-    if( sqlite3AtoF(pRec->z, &rValue, pRec->n, enc)==0 ) return;
-    if( 0==sqlite3Atoi64(pRec->z, &iValue, pRec->n, enc) ){
-      pRec->u.i = iValue;
-      pRec->flags |= MEM_Int;
-    }else{
-      pRec->r = rValue;
-      pRec->flags |= MEM_Real;
-    }
+  double rValue;
+  i64 iValue;
+  u8 enc = pRec->enc;
+  if( (pRec->flags&MEM_Str)==0 ) return;
+  if( sqlite3AtoF(pRec->z, &rValue, pRec->n, enc)==0 ) return;
+  if( 0==sqlite3Atoi64(pRec->z, &iValue, pRec->n, enc) ){
+    pRec->u.i = iValue;
+    pRec->flags |= MEM_Int;
+  }else{
+    pRec->r = rValue;
+    pRec->flags |= MEM_Real;
   }
 }
+#define ApplyNumericAffinity(X)  \
+   if(((X)->flags&(MEM_Real|MEM_Int))==0){applyNumericAffinity(X);}
 
 /*
 ** Processing is determine by the affinity parameter:
@@ -67284,7 +68187,7 @@ static void applyAffinity(
   }else if( affinity!=SQLITE_AFF_NONE ){
     assert( affinity==SQLITE_AFF_INTEGER || affinity==SQLITE_AFF_REAL
              || affinity==SQLITE_AFF_NUMERIC );
-    applyNumericAffinity(pRec);
+    ApplyNumericAffinity(pRec);
     if( pRec->flags & MEM_Real ){
       sqlite3VdbeIntegerAffinity(pRec);
     }
@@ -67319,6 +68222,29 @@ SQLITE_PRIVATE void sqlite3ValueApplyAffinity(
   applyAffinity((Mem *)pVal, affinity, enc);
 }
 
+/*
+** Return the numeric type for pMem, either MEM_Int or MEM_Real or both or
+** none.  
+**
+** Unlike applyNumericAffinity(), this routine does not modify pMem->flags.
+** But it does set pMem->r and pMem->u.i appropriately.
+*/
+static u16 numericType(Mem *pMem){
+  if( pMem->flags & (MEM_Int|MEM_Real) ){
+    return pMem->flags & (MEM_Int|MEM_Real);
+  }
+  if( pMem->flags & (MEM_Str|MEM_Blob) ){
+    if( sqlite3AtoF(pMem->z, &pMem->r, pMem->n, pMem->enc)==0 ){
+      return 0;
+    }
+    if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==SQLITE_OK ){
+      return MEM_Int;
+    }
+    return MEM_Real;
+  }
+  return 0;
+}
+
 #ifdef SQLITE_DEBUG
 /*
 ** Write a nice string representation of the contents of cell pMem
@@ -67842,12 +68768,14 @@ case OP_Return: {           /* in1 */
 
 /* Opcode: InitCoroutine P1 P2 P3 * *
 **
-** Set up register P1 so that it will OP_Yield to the co-routine
+** Set up register P1 so that it will Yield to the coroutine
 ** located at address P3.
 **
-** If P2!=0 then the co-routine implementation immediately follows
-** this opcode.  So jump over the co-routine implementation to
+** If P2!=0 then the coroutine implementation immediately follows
+** this opcode.  So jump over the coroutine implementation to
 ** address P2.
+**
+** See also: EndCoroutine
 */
 case OP_InitCoroutine: {     /* jump */
   assert( pOp->p1>0 &&  pOp->p1<=(p->nMem-p->nCursor) );
@@ -67863,9 +68791,11 @@ case OP_InitCoroutine: {     /* jump */
 
 /* Opcode:  EndCoroutine P1 * * * *
 **
-** The instruction at the address in register P1 is an OP_Yield.
-** Jump to the P2 parameter of that OP_Yield.
+** The instruction at the address in register P1 is a Yield.
+** Jump to the P2 parameter of that Yield.
 ** After the jump, register P1 becomes undefined.
+**
+** See also: InitCoroutine
 */
 case OP_EndCoroutine: {           /* in1 */
   VdbeOp *pCaller;
@@ -67882,11 +68812,16 @@ case OP_EndCoroutine: {           /* in1 */
 
 /* Opcode:  Yield P1 P2 * * *
 **
-** Swap the program counter with the value in register P1.
+** Swap the program counter with the value in register P1.  This
+** has the effect of yielding to a coroutine.
+**
+** If the coroutine that is launched by this instruction ends with
+** Yield or Return then continue to the next instruction.  But if
+** the coroutine launched by this instruction ends with
+** EndCoroutine, then jump to P2 rather than continuing with the
+** next instruction.
 **
-** If the co-routine ends with OP_Yield or OP_Return then continue
-** to the next instruction.  But if the co-routine ends with
-** OP_EndCoroutine, jump immediately to P2.
+** See also: InitCoroutine
 */
 case OP_Yield: {            /* in1, jump */
   int pcDest;
@@ -68049,7 +68984,7 @@ case OP_Real: {            /* same as TK_FLOAT, out2-prerelease */
 ** Synopsis: r[P2]='P4'
 **
 ** P4 points to a nul terminated UTF-8 string. This opcode is transformed 
-** into an OP_String before it is executed for the first time.  During
+** into a String before it is executed for the first time.  During
 ** this transformation, the length of string P4 is computed and stored
 ** as the P1 parameter.
 */
@@ -68178,10 +69113,11 @@ case OP_Variable: {            /* out2-prerelease */
 /* Opcode: Move P1 P2 P3 * *
 ** Synopsis:  r[P2@P3]=r[P1@P3]
 **
-** Move the values in register P1..P1+P3 over into
-** registers P2..P2+P3.  Registers P1..P1+P3 are
+** Move the P3 values in register P1..P1+P3-1 over into
+** registers P2..P2+P3-1.  Registers P1..P1+P3-1 are
 ** left holding a NULL.  It is an error for register ranges
-** P1..P1+P3 and P2..P2+P3 to overlap.
+** P1..P1+P3-1 and P2..P2+P3-1 to overlap.  It is an error
+** for P3 to be less than 1.
 */
 case OP_Move: {
   char *zMalloc;   /* Holding variable for allocated memory */
@@ -68192,7 +69128,7 @@ case OP_Move: {
   n = pOp->p3;
   p1 = pOp->p1;
   p2 = pOp->p2;
-  assert( n>=0 && p1>0 && p2>0 );
+  assert( n>0 && p1>0 && p2>0 );
   assert( p1+n<=p2 || p2+n<=p1 );
 
   pIn1 = &aMem[p1];
@@ -68216,7 +69152,7 @@ case OP_Move: {
     REGISTER_TRACE(p2++, pOut);
     pIn1++;
     pOut++;
-  }while( n-- );
+  }while( --n );
   break;
 }
 
@@ -68448,20 +69384,22 @@ case OP_Multiply:              /* same as TK_STAR, in1, in2, out3 */
 case OP_Divide:                /* same as TK_SLASH, in1, in2, out3 */
 case OP_Remainder: {           /* same as TK_REM, in1, in2, out3 */
   char bIntint;   /* Started out as two integer operands */
-  int flags;      /* Combined MEM_* flags from both inputs */
+  u16 flags;      /* Combined MEM_* flags from both inputs */
+  u16 type1;      /* Numeric type of left operand */
+  u16 type2;      /* Numeric type of right operand */
   i64 iA;         /* Integer value of left operand */
   i64 iB;         /* Integer value of right operand */
   double rA;      /* Real value of left operand */
   double rB;      /* Real value of right operand */
 
   pIn1 = &aMem[pOp->p1];
-  applyNumericAffinity(pIn1);
+  type1 = numericType(pIn1);
   pIn2 = &aMem[pOp->p2];
-  applyNumericAffinity(pIn2);
+  type2 = numericType(pIn2);
   pOut = &aMem[pOp->p3];
   flags = pIn1->flags | pIn2->flags;
   if( (flags & MEM_Null)!=0 ) goto arithmetic_result_is_null;
-  if( (pIn1->flags & pIn2->flags & MEM_Int)==MEM_Int ){
+  if( (type1 & type2 & MEM_Int)!=0 ){
     iA = pIn1->u.i;
     iB = pIn2->u.i;
     bIntint = 1;
@@ -68517,7 +69455,7 @@ fp_math:
     }
     pOut->r = rB;
     MemSetTypeFlag(pOut, MEM_Real);
-    if( (flags & MEM_Real)==0 && !bIntint ){
+    if( ((type1|type2)&MEM_Real)==0 && !bIntint ){
       sqlite3VdbeIntegerAffinity(pOut);
     }
 #endif
@@ -69093,6 +70031,7 @@ case OP_Permutation: {
 }
 
 /* Opcode: Compare P1 P2 P3 P4 P5
+** Synopsis: r[P1@P3] <-> r[P2@P3]
 **
 ** Compare two vectors of registers in reg(P1)..reg(P1+P3-1) (call this
 ** vector "A") and in reg(P2)..reg(P2+P3-1) ("B").  Save the result of
@@ -69267,10 +70206,14 @@ case OP_BitNot: {             /* same as TK_BITNOT, in1, out2 */
 
 /* Opcode: Once P1 P2 * * *
 **
-** Check if OP_Once flag P1 is set. If so, jump to instruction P2. Otherwise,
-** set the flag and fall through to the next instruction.  In other words,
-** this opcode causes all following opcodes up through P2 (but not including
-** P2) to run just once and to be skipped on subsequent times through the loop.
+** Check the "once" flag number P1. If it is set, jump to instruction P2. 
+** Otherwise, set the flag and fall through to the next instruction.
+** In other words, this opcode causes all following opcodes up through P2
+** (but not including P2) to run just once and to be skipped on subsequent
+** times through the loop.
+**
+** All "once" flags are initially cleared whenever a prepared statement
+** first begins to run.
 */
 case OP_Once: {             /* jump */
   assert( pOp->p1<p->nOnceFlag );
@@ -69287,13 +70230,13 @@ case OP_Once: {             /* jump */
 **
 ** Jump to P2 if the value in register P1 is true.  The value
 ** is considered true if it is numeric and non-zero.  If the value
-** in P1 is NULL then take the jump if P3 is non-zero.
+** in P1 is NULL then take the jump if and only if P3 is non-zero.
 */
 /* Opcode: IfNot P1 P2 P3 * *
 **
 ** Jump to P2 if the value in register P1 is False.  The value
 ** is considered false if it has a numeric value of zero.  If the value
-** in P1 is NULL then take the jump if P3 is zero.
+** in P1 is NULL then take the jump if and only if P3 is non-zero.
 */
 case OP_If:                 /* jump, in1 */
 case OP_IfNot: {            /* jump, in1 */
@@ -70105,7 +71048,7 @@ case OP_Transaction: {
   assert( p->bIsReader );
   assert( p->readOnly==0 || pOp->p2==0 );
   assert( pOp->p1>=0 && pOp->p1<db->nDb );
-  assert( (p->btreeMask & (((yDbMask)1)<<pOp->p1))!=0 );
+  assert( DbMaskTest(p->btreeMask, pOp->p1) );
   if( pOp->p2 && (db->flags & SQLITE_QueryOnly)!=0 ){
     rc = SQLITE_READONLY;
     goto abort_due_to_error;
@@ -70200,7 +71143,7 @@ case OP_ReadCookie: {               /* out2-prerelease */
   assert( pOp->p3<SQLITE_N_BTREE_META );
   assert( iDb>=0 && iDb<db->nDb );
   assert( db->aDb[iDb].pBt!=0 );
-  assert( (p->btreeMask & (((yDbMask)1)<<iDb))!=0 );
+  assert( DbMaskTest(p->btreeMask, iDb) );
 
   sqlite3BtreeGetMeta(db->aDb[iDb].pBt, iCookie, (u32 *)&iMeta);
   pOut->u.i = iMeta;
@@ -70221,7 +71164,7 @@ case OP_SetCookie: {       /* in3 */
   Db *pDb;
   assert( pOp->p2<SQLITE_N_BTREE_META );
   assert( pOp->p1>=0 && pOp->p1<db->nDb );
-  assert( (p->btreeMask & (((yDbMask)1)<<pOp->p1))!=0 );
+  assert( DbMaskTest(p->btreeMask, pOp->p1) );
   assert( p->readOnly==0 );
   pDb = &db->aDb[pOp->p1];
   assert( pDb->pBt!=0 );
@@ -70276,7 +71219,21 @@ case OP_SetCookie: {       /* in3 */
 ** sequence of the index being opened. Otherwise, if P4 is an integer 
 ** value, it is set to the number of columns in the table.
 **
-** See also OpenWrite.
+** See also: OpenWrite, ReopenIdx
+*/
+/* Opcode: ReopenIdx P1 P2 P3 P4 P5
+** Synopsis: root=P2 iDb=P3
+**
+** The ReopenIdx opcode works exactly like ReadOpen except that it first
+** checks to see if the cursor on P1 is already open with a root page
+** number of P2 and if it is this opcode becomes a no-op.  In other words,
+** if the cursor is already open, do not reopen it.
+**
+** The ReopenIdx opcode may only be used with P5==0 and with P4 being
+** a P4_KEYINFO object.  Furthermore, the P3 value must be the same as
+** every other ReopenIdx or OpenRead for the same cursor number.
+**
+** See the OpenRead opcode documentation for additional information.
 */
 /* Opcode: OpenWrite P1 P2 P3 P4 P5
 ** Synopsis: root=P2 iDb=P3
@@ -70298,6 +71255,19 @@ case OP_SetCookie: {       /* in3 */
 **
 ** See also OpenRead.
 */
+case OP_ReopenIdx: {
+  VdbeCursor *pCur;
+
+  assert( pOp->p5==0 );
+  assert( pOp->p4type==P4_KEYINFO );
+  pCur = p->apCsr[pOp->p1];
+  if( pCur && pCur->pgnoRoot==(u32)pOp->p2 ){
+    assert( pCur->iDb==pOp->p3 );      /* Guaranteed by the code generator */
+    break;
+  }
+  /* If the cursor is not currently open or is open on a different
+  ** index, then fall through into OP_OpenRead to force a reopen */
+}
 case OP_OpenRead:
 case OP_OpenWrite: {
   int nField;
@@ -70312,7 +71282,8 @@ case OP_OpenWrite: {
   assert( (pOp->p5&(OPFLAG_P2ISREG|OPFLAG_BULKCSR))==pOp->p5 );
   assert( pOp->opcode==OP_OpenWrite || pOp->p5==0 );
   assert( p->bIsReader );
-  assert( pOp->opcode==OP_OpenRead || p->readOnly==0 );
+  assert( pOp->opcode==OP_OpenRead || pOp->opcode==OP_ReopenIdx
+          || p->readOnly==0 );
 
   if( p->expired ){
     rc = SQLITE_ABORT;
@@ -70324,7 +71295,7 @@ case OP_OpenWrite: {
   p2 = pOp->p2;
   iDb = pOp->p3;
   assert( iDb>=0 && iDb<db->nDb );
-  assert( (p->btreeMask & (((yDbMask)1)<<iDb))!=0 );
+  assert( DbMaskTest(p->btreeMask, iDb) );
   pDb = &db->aDb[iDb];
   pX = pDb->pBt;
   assert( pX!=0 );
@@ -70369,6 +71340,7 @@ case OP_OpenWrite: {
   if( pCur==0 ) goto no_mem;
   pCur->nullRow = 1;
   pCur->isOrdered = 1;
+  pCur->pgnoRoot = p2;
   rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->pCursor);
   pCur->pKeyInfo = pKeyInfo;
   assert( OPFLAG_BULKCSR==BTREE_BULKLOAD );
@@ -70428,6 +71400,7 @@ case OP_OpenEphemeral: {
   pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, 1);
   if( pCx==0 ) goto no_mem;
   pCx->nullRow = 1;
+  pCx->isEphemeral = 1;
   rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBt, 
                         BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5, vfsFlags);
   if( rc==SQLITE_OK ){
@@ -70522,7 +71495,7 @@ case OP_Close: {
   break;
 }
 
-/* Opcode: SeekGe P1 P2 P3 P4 *
+/* Opcode: SeekGE P1 P2 P3 P4 *
 ** Synopsis: key=r[P3@P4]
 **
 ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), 
@@ -70534,9 +71507,13 @@ case OP_Close: {
 ** is greater than or equal to the key value. If there are no records 
 ** greater than or equal to the key and P2 is not zero, then jump to P2.
 **
-** See also: Found, NotFound, Distinct, SeekLt, SeekGt, SeekLe
+** This opcode leaves the cursor configured to move in forward order,
+** from the beginning toward the end.  In other words, the cursor is
+** configured to use Next, not Prev.
+**
+** See also: Found, NotFound, SeekLt, SeekGt, SeekLe
 */
-/* Opcode: SeekGt P1 P2 P3 P4 *
+/* Opcode: SeekGT P1 P2 P3 P4 *
 ** Synopsis: key=r[P3@P4]
 **
 ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), 
@@ -70548,9 +71525,13 @@ case OP_Close: {
 ** is greater than the key value. If there are no records greater than 
 ** the key and P2 is not zero, then jump to P2.
 **
-** See also: Found, NotFound, Distinct, SeekLt, SeekGe, SeekLe
+** This opcode leaves the cursor configured to move in forward order,
+** from the beginning toward the end.  In other words, the cursor is
+** configured to use Next, not Prev.
+**
+** See also: Found, NotFound, SeekLt, SeekGe, SeekLe
 */
-/* Opcode: SeekLt P1 P2 P3 P4 * 
+/* Opcode: SeekLT P1 P2 P3 P4 * 
 ** Synopsis: key=r[P3@P4]
 **
 ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), 
@@ -70562,9 +71543,13 @@ case OP_Close: {
 ** is less than the key value. If there are no records less than 
 ** the key and P2 is not zero, then jump to P2.
 **
-** See also: Found, NotFound, Distinct, SeekGt, SeekGe, SeekLe
+** This opcode leaves the cursor configured to move in reverse order,
+** from the end toward the beginning.  In other words, the cursor is
+** configured to use Prev, not Next.
+**
+** See also: Found, NotFound, SeekGt, SeekGe, SeekLe
 */
-/* Opcode: SeekLe P1 P2 P3 P4 *
+/* Opcode: SeekLE P1 P2 P3 P4 *
 ** Synopsis: key=r[P3@P4]
 **
 ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), 
@@ -70576,7 +71561,11 @@ case OP_Close: {
 ** is less than or equal to the key value. If there are no records 
 ** less than or equal to the key and P2 is not zero, then jump to P2.
 **
-** See also: Found, NotFound, Distinct, SeekGt, SeekGe, SeekLt
+** This opcode leaves the cursor configured to move in reverse order,
+** from the end toward the beginning.  In other words, the cursor is
+** configured to use Prev, not Next.
+**
+** See also: Found, NotFound, SeekGt, SeekGe, SeekLt
 */
 case OP_SeekLT:         /* jump, in3 */
 case OP_SeekLE:         /* jump, in3 */
@@ -70601,12 +71590,15 @@ case OP_SeekGT: {       /* jump, in3 */
   assert( pC->pCursor!=0 );
   oc = pOp->opcode;
   pC->nullRow = 0;
+#ifdef SQLITE_DEBUG
+  pC->seekOp = pOp->opcode;
+#endif
   if( pC->isTable ){
     /* The input value in P3 might be of any type: integer, real, string,
     ** blob, or NULL.  But it needs to be an integer before we can do
     ** the seek, so covert it. */
     pIn3 = &aMem[pOp->p3];
-    applyNumericAffinity(pIn3);
+    ApplyNumericAffinity(pIn3);
     iKey = sqlite3VdbeIntValue(pIn3);
     pC->rowidIsValid = 0;
 
@@ -70756,6 +71748,10 @@ case OP_Seek: {    /* in2 */
 ** is a prefix of any entry in P1 then a jump is made to P2 and
 ** P1 is left pointing at the matching entry.
 **
+** This operation leaves the cursor in a state where it can be
+** advanced in the forward direction.  The Next instruction will work,
+** but not the Prev instruction.
+**
 ** See also: NotFound, NoConflict, NotExists. SeekGe
 */
 /* Opcode: NotFound P1 P2 P3 P4 *
@@ -70771,6 +71767,10 @@ case OP_Seek: {    /* in2 */
 ** falls through to the next instruction and P1 is left pointing at the
 ** matching entry.
 **
+** This operation leaves the cursor in a state where it cannot be
+** advanced in either direction.  In other words, the Next and Prev
+** opcodes do not work after this operation.
+**
 ** See also: Found, NotExists, NoConflict
 */
 /* Opcode: NoConflict P1 P2 P3 P4 *
@@ -70790,6 +71790,10 @@ case OP_Seek: {    /* in2 */
 ** This opcode is similar to OP_NotFound with the exceptions that the
 ** branch is always taken if any part of the search key input is NULL.
 **
+** This operation leaves the cursor in a state where it cannot be
+** advanced in either direction.  In other words, the Next and Prev
+** opcodes do not work after this operation.
+**
 ** See also: NotFound, Found, NotExists
 */
 case OP_NoConflict:     /* jump, in3 */
@@ -70812,6 +71816,9 @@ case OP_Found: {        /* jump, in3 */
   assert( pOp->p4type==P4_INT32 );
   pC = p->apCsr[pOp->p1];
   assert( pC!=0 );
+#ifdef SQLITE_DEBUG
+  pC->seekOp = pOp->opcode;
+#endif
   pIn3 = &aMem[pOp->p3];
   assert( pC->pCursor!=0 );
   assert( pC->isTable==0 );
@@ -70883,6 +71890,10 @@ case OP_Found: {        /* jump, in3 */
 ** The OP_NotFound opcode performs the same operation on index btrees
 ** (with arbitrary multi-value keys).
 **
+** This opcode leaves the cursor in a state where it cannot be advanced
+** in either direction.  In other words, the Next and Prev opcodes will
+** not work following this opcode.
+**
 ** See also: Found, NotFound, NoConflict
 */
 case OP_NotExists: {        /* jump, in3 */
@@ -70896,6 +71907,9 @@ case OP_NotExists: {        /* jump, in3 */
   assert( pOp->p1>=0 && pOp->p1<p->nCursor );
   pC = p->apCsr[pOp->p1];
   assert( pC!=0 );
+#ifdef SQLITE_DEBUG
+  pC->seekOp = 0;
+#endif
   assert( pC->isTable );
   assert( pC->pseudoTableReg==0 );
   pCrsr = pC->pCursor;
@@ -70918,7 +71932,7 @@ case OP_NotExists: {        /* jump, in3 */
 }
 
 /* Opcode: Sequence P1 P2 * * *
-** Synopsis: r[P2]=rowid
+** Synopsis: r[P2]=cursor[P1].ctr++
 **
 ** Find the next available sequence number for cursor P1.
 ** Write the sequence number into register P2.
@@ -71198,7 +72212,7 @@ case OP_InsertInt: {
 ** The cursor will be left pointing at either the next or the previous
 ** record in the table. If it is left pointing at the next record, then
 ** the next Next instruction will be a no-op.  Hence it is OK to delete
-** a record from within an Next loop.
+** a record from within a Next loop.
 **
 ** If the OPFLAG_NCHANGE flag of P2 is set, then the row change count is
 ** incremented (otherwise not).
@@ -71258,12 +72272,12 @@ case OP_ResetCount: {
 }
 
 /* Opcode: SorterCompare P1 P2 P3 P4
-** Synopsis:  if key(P1)!=rtrim(r[P3],P4) goto P2
+** Synopsis:  if key(P1)!=trim(r[P3],P4) goto P2
 **
 ** P1 is a sorter cursor. This instruction compares a prefix of the
-** the record blob in register P3 against a prefix of the entry that 
-** the sorter cursor currently points to.  The final P4 fields of both
-** the P3 and sorter record are ignored.
+** record blob in register P3 against a prefix of the entry that 
+** the sorter cursor currently points to.  Only the first P4 fields
+** of r[P3] and the sorter record are compared.
 **
 ** If either P3 or the sorter contains a NULL in one of their significant
 ** fields (not counting the P4 fields at the end which are ignored) then
@@ -71275,14 +72289,14 @@ case OP_ResetCount: {
 case OP_SorterCompare: {
   VdbeCursor *pC;
   int res;
-  int nIgnore;
+  int nKeyCol;
 
   pC = p->apCsr[pOp->p1];
   assert( isSorter(pC) );
   assert( pOp->p4type==P4_INT32 );
   pIn3 = &aMem[pOp->p3];
-  nIgnore = pOp->p4.i;
-  rc = sqlite3VdbeSorterCompare(pC, pIn3, nIgnore, &res);
+  nKeyCol = pOp->p4.i;
+  rc = sqlite3VdbeSorterCompare(pC, pIn3, nKeyCol, &res);
   VdbeBranchTaken(res!=0,2);
   if( res ){
     pc = pOp->p2-1;
@@ -71302,6 +72316,7 @@ case OP_SorterData: {
   pC = p->apCsr[pOp->p1];
   assert( isSorter(pC) );
   rc = sqlite3VdbeSorterRowkey(pC, pOut);
+  assert( rc!=SQLITE_OK || (pOut->flags & MEM_Blob) );
   break;
 }
 
@@ -71461,11 +72476,15 @@ case OP_NullRow: {
 
 /* Opcode: Last P1 P2 * * *
 **
-** The next use of the Rowid or Column or Next instruction for P1 
+** The next use of the Rowid or Column or Prev instruction for P1 
 ** will refer to the last entry in the database table or index.
 ** If the table or index is empty and P2>0, then jump immediately to P2.
 ** If P2 is 0 or if the table or index is not empty, fall through
 ** to the following instruction.
+**
+** This opcode leaves the cursor configured to move in reverse order,
+** from the end toward the beginning.  In other words, the cursor is
+** configured to use Prev, not Next.
 */
 case OP_Last: {        /* jump */
   VdbeCursor *pC;
@@ -71483,6 +72502,9 @@ case OP_Last: {        /* jump */
   pC->deferredMoveto = 0;
   pC->rowidIsValid = 0;
   pC->cacheStatus = CACHE_STALE;
+#ifdef SQLITE_DEBUG
+  pC->seekOp = OP_Last;
+#endif
   if( pOp->p2>0 ){
     VdbeBranchTaken(res!=0,2);
     if( res ) pc = pOp->p2 - 1;
@@ -71519,6 +72541,10 @@ case OP_Sort: {        /* jump */
 ** If the table or index is empty and P2>0, then jump immediately to P2.
 ** If P2 is 0 or if the table or index is not empty, fall through
 ** to the following instruction.
+**
+** This opcode leaves the cursor configured to move in forward order,
+** from the beginning toward the end.  In other words, the cursor is
+** configured to use Next, not Prev.
 */
 case OP_Rewind: {        /* jump */
   VdbeCursor *pC;
@@ -71530,6 +72556,9 @@ case OP_Rewind: {        /* jump */
   assert( pC!=0 );
   assert( isSorter(pC)==(pOp->opcode==OP_SorterSort) );
   res = 1;
+#ifdef SQLITE_DEBUG
+  pC->seekOp = OP_Rewind;
+#endif
   if( isSorter(pC) ){
     rc = sqlite3VdbeSorterRewind(db, pC, &res);
   }else{
@@ -71556,6 +72585,10 @@ case OP_Rewind: {        /* jump */
 ** to the following instruction.  But if the cursor advance was successful,
 ** jump immediately to P2.
 **
+** The Next opcode is only valid following an SeekGT, SeekGE, or
+** OP_Rewind opcode used to position the cursor.  Next is not allowed
+** to follow SeekLT, SeekLE, or OP_Last.
+**
 ** The P1 cursor must be for a real table, not a pseudo-table.  P1 must have
 ** been opened prior to this opcode or the program will segfault.
 **
@@ -71574,7 +72607,7 @@ case OP_Rewind: {        /* jump */
 */
 /* Opcode: NextIfOpen P1 P2 P3 P4 P5
 **
-** This opcode works just like OP_Next except that if cursor P1 is not
+** This opcode works just like Next except that if cursor P1 is not
 ** open it behaves a no-op.
 */
 /* Opcode: Prev P1 P2 P3 P4 P5
@@ -71584,6 +72617,11 @@ case OP_Rewind: {        /* jump */
 ** to the following instruction.  But if the cursor backup was successful,
 ** jump immediately to P2.
 **
+**
+** The Prev opcode is only valid following an SeekLT, SeekLE, or
+** OP_Last opcode used to position the cursor.  Prev is not allowed
+** to follow SeekGT, SeekGE, or OP_Rewind.
+**
 ** The P1 cursor must be for a real table, not a pseudo-table.  If P1 is
 ** not open then the behavior is undefined.
 **
@@ -71600,7 +72638,7 @@ case OP_Rewind: {        /* jump */
 */
 /* Opcode: PrevIfOpen P1 P2 P3 P4 P5
 **
-** This opcode works just like OP_Prev except that if cursor P1 is not
+** This opcode works just like Prev except that if cursor P1 is not
 ** open it behaves a no-op.
 */
 case OP_SorterNext: {  /* jump */
@@ -71609,6 +72647,7 @@ case OP_SorterNext: {  /* jump */
 
   pC = p->apCsr[pOp->p1];
   assert( isSorter(pC) );
+  res = 0;
   rc = sqlite3VdbeSorterNext(db, pC, &res);
   goto next_tail;
 case OP_PrevIfOpen:    /* jump */
@@ -71630,6 +72669,16 @@ case OP_Next:          /* jump */
   assert( pOp->opcode!=OP_Prev || pOp->p4.xAdvance==sqlite3BtreePrevious );
   assert( pOp->opcode!=OP_NextIfOpen || pOp->p4.xAdvance==sqlite3BtreeNext );
   assert( pOp->opcode!=OP_PrevIfOpen || pOp->p4.xAdvance==sqlite3BtreePrevious);
+
+  /* The Next opcode is only used after SeekGT, SeekGE, and Rewind.
+  ** The Prev opcode is only used after SeekLT, SeekLE, and Last. */
+  assert( pOp->opcode!=OP_Next || pOp->opcode!=OP_NextIfOpen
+       || pC->seekOp==OP_SeekGT || pC->seekOp==OP_SeekGE
+       || pC->seekOp==OP_Rewind || pC->seekOp==OP_Found);
+  assert( pOp->opcode!=OP_Prev || pOp->opcode!=OP_PrevIfOpen
+       || pC->seekOp==OP_SeekLT || pC->seekOp==OP_SeekLE
+       || pC->seekOp==OP_Last );
+
   rc = pOp->p4.xAdvance(pC->pCursor, &res);
 next_tail:
   pC->cacheStatus = CACHE_STALE;
@@ -71912,7 +72961,7 @@ case OP_Destroy: {     /* out2-prerelease */
   }else{
     iDb = pOp->p3;
     assert( iCnt==1 );
-    assert( (p->btreeMask & (((yDbMask)1)<<iDb))!=0 );
+    assert( DbMaskTest(p->btreeMask, iDb) );
     iMoved = 0;  /* Not needed.  Only to silence a warning. */
     rc = sqlite3BtreeDropTable(db->aDb[iDb].pBt, pOp->p1, &iMoved);
     pOut->flags = MEM_Int;
@@ -71952,7 +73001,7 @@ case OP_Clear: {
  
   nChange = 0;
   assert( p->readOnly==0 );
-  assert( (p->btreeMask & (((yDbMask)1)<<pOp->p2))!=0 );
+  assert( DbMaskTest(p->btreeMask, pOp->p2) );
   rc = sqlite3BtreeClearTable(
       db->aDb[pOp->p2].pBt, pOp->p1, (pOp->p3 ? &nChange : 0)
   );
@@ -71967,6 +73016,29 @@ case OP_Clear: {
   break;
 }
 
+/* Opcode: ResetSorter P1 * * * *
+**
+** Delete all contents from the ephemeral table or sorter
+** that is open on cursor P1.
+**
+** This opcode only works for cursors used for sorting and
+** opened with OP_OpenEphemeral or OP_SorterOpen.
+*/
+case OP_ResetSorter: {
+  VdbeCursor *pC;
+ 
+  assert( pOp->p1>=0 && pOp->p1<p->nCursor );
+  pC = p->apCsr[pOp->p1];
+  assert( pC!=0 );
+  if( pC->pSorter ){
+    sqlite3VdbeSorterReset(db, pC->pSorter);
+  }else{
+    assert( pC->isEphemeral );
+    rc = sqlite3BtreeClearTableOfCursor(pC->pCursor);
+  }
+  break;
+}
+
 /* Opcode: CreateTable P1 P2 * * *
 ** Synopsis: r[P2]=root iDb=P1
 **
@@ -71999,7 +73071,7 @@ case OP_CreateTable: {          /* out2-prerelease */
 
   pgno = 0;
   assert( pOp->p1>=0 && pOp->p1<db->nDb );
-  assert( (p->btreeMask & (((yDbMask)1)<<pOp->p1))!=0 );
+  assert( DbMaskTest(p->btreeMask, pOp->p1) );
   assert( p->readOnly==0 );
   pDb = &db->aDb[pOp->p1];
   assert( pDb->pBt!=0 );
@@ -72087,7 +73159,8 @@ case OP_LoadAnalysis: {
 **
 ** Remove the internal (in-memory) data structures that describe
 ** the table named P4 in database P1.  This is called after a table
-** is dropped in order to keep the internal representation of the
+** is dropped from disk (using the Destroy opcode) in order to keep 
+** the internal representation of the
 ** schema consistent with what is on disk.
 */
 case OP_DropTable: {
@@ -72099,7 +73172,8 @@ case OP_DropTable: {
 **
 ** Remove the internal (in-memory) data structures that describe
 ** the index named P4 in database P1.  This is called after an index
-** is dropped in order to keep the internal representation of the
+** is dropped from disk (using the Destroy opcode)
+** in order to keep the internal representation of the
 ** schema consistent with what is on disk.
 */
 case OP_DropIndex: {
@@ -72111,7 +73185,8 @@ case OP_DropIndex: {
 **
 ** Remove the internal (in-memory) data structures that describe
 ** the trigger named P4 in database P1.  This is called after a trigger
-** is dropped in order to keep the internal representation of the
+** is dropped from disk (using the Destroy opcode) in order to keep 
+** the internal representation of the
 ** schema consistent with what is on disk.
 */
 case OP_DropTrigger: {
@@ -72164,7 +73239,7 @@ case OP_IntegrityCk: {
   }
   aRoot[j] = 0;
   assert( pOp->p5<db->nDb );
-  assert( (p->btreeMask & (((yDbMask)1)<<pOp->p5))!=0 );
+  assert( DbMaskTest(p->btreeMask, pOp->p5) );
   z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, aRoot, nRoot,
                                  (int)pnErr->u.i, &nErr);
   sqlite3DbFree(db, aRoot);
@@ -72273,9 +73348,7 @@ case OP_RowSetTest: {                     /* jump, in1, in3 */
   assert( pOp->p4type==P4_INT32 );
   assert( iSet==-1 || iSet>=0 );
   if( iSet ){
-    exists = sqlite3RowSetTest(pIn1->u.pRowSet, 
-                               (u8)(iSet>=0 ? iSet & 0xf : 0xff),
-                               pIn3->u.i);
+    exists = sqlite3RowSetTest(pIn1->u.pRowSet, iSet, pIn3->u.i);
     VdbeBranchTaken(exists!=0,2);
     if( exists ){
       pc = pOp->p2 - 1;
@@ -72528,17 +73601,16 @@ case OP_IfPos: {        /* jump, in1 */
   break;
 }
 
-/* Opcode: IfNeg P1 P2 * * *
-** Synopsis: if r[P1]<0 goto P2
+/* Opcode: IfNeg P1 P2 P3 * *
+** Synopsis: r[P1]+=P3, if r[P1]<0 goto P2
 **
-** If the value of register P1 is less than zero, jump to P2. 
-**
-** It is illegal to use this instruction on a register that does
-** not contain an integer.  An assertion fault will result if you try.
+** Register P1 must contain an integer.  Add literal P3 to the value in
+** register P1 then if the value of register P1 is less than zero, jump to P2. 
 */
 case OP_IfNeg: {        /* jump, in1 */
   pIn1 = &aMem[pOp->p1];
   assert( pIn1->flags&MEM_Int );
+  pIn1->u.i += pOp->p3;
   VdbeBranchTaken(pIn1->u.i<0, 2);
   if( pIn1->u.i<0 ){
      pc = pOp->p2 - 1;
@@ -72551,9 +73623,6 @@ case OP_IfNeg: {        /* jump, in1 */
 **
 ** The register P1 must contain an integer.  Add literal P3 to the
 ** value in register P1.  If the result is exactly 0, jump to P2. 
-**
-** It is illegal to use this instruction on a register that does
-** not contain an integer.  An assertion fault will result if you try.
 */
 case OP_IfZero: {        /* jump, in1 */
   pIn1 = &aMem[pOp->p1];
@@ -72826,7 +73895,7 @@ case OP_IncrVacuum: {        /* jump */
   Btree *pBt;
 
   assert( pOp->p1>=0 && pOp->p1<db->nDb );
-  assert( (p->btreeMask & (((yDbMask)1)<<pOp->p1))!=0 );
+  assert( DbMaskTest(p->btreeMask, pOp->p1) );
   assert( p->readOnly==0 );
   pBt = db->aDb[pOp->p1].pBt;
   rc = sqlite3BtreeIncrVacuum(pBt);
@@ -72841,12 +73910,13 @@ case OP_IncrVacuum: {        /* jump */
 
 /* Opcode: Expire P1 * * * *
 **
-** Cause precompiled statements to become expired. An expired statement
-** fails with an error code of SQLITE_SCHEMA if it is ever executed 
-** (via sqlite3_step()).
+** Cause precompiled statements to expire.  When an expired statement
+** is executed using sqlite3_step() it will either automatically
+** reprepare itself (if it was originally created using sqlite3_prepare_v2())
+** or it will fail with SQLITE_SCHEMA.
 ** 
 ** If P1 is 0, then all SQL statements become expired. If P1 is non-zero,
-** then only the currently executing statement is affected. 
+** then only the currently executing statement is expired.
 */
 case OP_Expire: {
   if( !pOp->p1 ){
@@ -72878,7 +73948,7 @@ case OP_TableLock: {
   if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommitted) ){
     int p1 = pOp->p1; 
     assert( p1>=0 && p1<db->nDb );
-    assert( (p->btreeMask & (((yDbMask)1)<<p1))!=0 );
+    assert( DbMaskTest(p->btreeMask, p1) );
     assert( isWriteLock==0 || isWriteLock==1 );
     rc = sqlite3BtreeLockTable(db->aDb[p1].pBt, pOp->p2, isWriteLock);
     if( (rc&0xFF)==SQLITE_LOCKED ){
@@ -72975,7 +74045,7 @@ case OP_VOpen: {
 
 #ifndef SQLITE_OMIT_VIRTUALTABLE
 /* Opcode: VFilter P1 P2 P3 P4 *
-** Synopsis: iPlan=r[P3] zPlan='P4'
+** Synopsis: iplan=r[P3] zplan='P4'
 **
 ** P1 is a cursor opened using VOpen.  P2 is an address to jump to if
 ** the filtered result set is empty.
@@ -73328,7 +74398,7 @@ case OP_Init: {          /* jump */
   if( zTrace ){
     int i;
     for(i=0; i<db->nDb; i++){
-      if( MASKBIT(i) & p->btreeMask)==0 ) continue;
+      if( DbMaskTest(p->btreeMask, i)==0 ) continue;
       sqlite3_file_control(db, db->aDb[i].zName, SQLITE_FCNTL_TRACE, zTrace);
     }
   }
@@ -73371,8 +74441,8 @@ default: {          /* This is really OP_Noop and OP_Explain */
 
 #ifdef VDBE_PROFILE
     {
-      u64 elapsed = sqlite3Hwtime() - start;
-      pOp->cycles += elapsed;
+      u64 endTime = sqlite3Hwtime();
+      if( endTime>start ) pOp->cycles += endTime - start;
       pOp->cnt++;
     }
 #endif
@@ -73543,9 +74613,7 @@ static int blobSeekToRow(Incrblob *p, sqlite3_int64 iRow, char **pzErr){
       p->iOffset = pC->aType[p->iCol + pC->nField];
       p->nByte = sqlite3VdbeSerialTypeLen(type);
       p->pCsr =  pC->pCursor;
-      sqlite3BtreeEnterCursor(p->pCsr);
-      sqlite3BtreeCacheOverflow(p->pCsr);
-      sqlite3BtreeLeaveCursor(p->pCsr);
+      sqlite3BtreeIncrblobCursor(p->pCsr);
     }
   }
 
@@ -74285,7 +75353,6 @@ static int vdbeSorterIterInit(
       rc = sqlite3OsRead(
           pSorter->pTemp1, &pIter->aBuffer[iBuf], nRead, iStart
       );
-      assert( rc!=SQLITE_IOERR_SHORT_READ );
     }
 
     if( rc==SQLITE_OK ){
@@ -74321,7 +75388,7 @@ static int vdbeSorterIterInit(
 */
 static void vdbeSorterCompare(
   const VdbeCursor *pCsr,         /* Cursor object (for pKeyInfo) */
-  int nIgnore,                    /* Ignore the last nIgnore fields */
+  int nKeyCol,                    /* Num of columns. 0 means "all" */
   const void *pKey1, int nKey1,   /* Left side of comparison */
   const void *pKey2, int nKey2,   /* Right side of comparison */
   int *pRes                       /* OUT: Result of comparison */
@@ -74335,10 +75402,9 @@ static void vdbeSorterCompare(
     sqlite3VdbeRecordUnpack(pKeyInfo, nKey2, pKey2, r2);
   }
 
-  if( nIgnore ){
-    r2->nField = pKeyInfo->nField - nIgnore;
-    assert( r2->nField>0 );
-    for(i=0; i<r2->nField; i++){
+  if( nKeyCol ){
+    r2->nField = nKeyCol;
+    for(i=0; i<nKeyCol; i++){
       if( r2->aMem[i].flags & MEM_Null ){
         *pRes = -1;
         return;
@@ -74440,22 +75506,39 @@ static void vdbeSorterRecordFree(sqlite3 *db, SorterRecord *pRecord){
 }
 
 /*
+** Reset a sorting cursor back to its original empty state.
+*/
+SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *db, VdbeSorter *pSorter){
+  if( pSorter->aIter ){
+    int i;
+    for(i=0; i<pSorter->nTree; i++){
+      vdbeSorterIterZero(db, &pSorter->aIter[i]);
+    }
+    sqlite3DbFree(db, pSorter->aIter);
+    pSorter->aIter = 0;
+  }
+  if( pSorter->pTemp1 ){
+    sqlite3OsCloseFree(pSorter->pTemp1);
+    pSorter->pTemp1 = 0;
+  }
+  vdbeSorterRecordFree(db, pSorter->pRecord);
+  pSorter->pRecord = 0;
+  pSorter->iWriteOff = 0;
+  pSorter->iReadOff = 0;
+  pSorter->nInMemory = 0;
+  pSorter->nTree = 0;
+  pSorter->nPMA = 0;
+  pSorter->aTree = 0;
+}
+
+
+/*
 ** Free any cursor components allocated by sqlite3VdbeSorterXXX routines.
 */
 SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *db, VdbeCursor *pCsr){
   VdbeSorter *pSorter = pCsr->pSorter;
   if( pSorter ){
-    if( pSorter->aIter ){
-      int i;
-      for(i=0; i<pSorter->nTree; i++){
-        vdbeSorterIterZero(db, &pSorter->aIter[i]);
-      }
-      sqlite3DbFree(db, pSorter->aIter);
-    }
-    if( pSorter->pTemp1 ){
-      sqlite3OsCloseFree(pSorter->pTemp1);
-    }
-    vdbeSorterRecordFree(db, pSorter->pRecord);
+    sqlite3VdbeSorterReset(db, pSorter);
     sqlite3DbFree(db, pSorter->pUnpacked);
     sqlite3DbFree(db, pSorter);
     pCsr->pSorter = 0;
@@ -74891,14 +75974,55 @@ SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *db, const VdbeCursor *pCsr, in
 
   if( pSorter->aTree ){
     int iPrev = pSorter->aTree[1];/* Index of iterator to advance */
-    int i;                        /* Index of aTree[] to recalculate */
-
     rc = vdbeSorterIterNext(db, &pSorter->aIter[iPrev]);
-    for(i=(pSorter->nTree+iPrev)/2; rc==SQLITE_OK && i>0; i=i/2){
-      rc = vdbeSorterDoCompare(pCsr, i);
-    }
+    if( rc==SQLITE_OK ){
+      int i;                      /* Index of aTree[] to recalculate */
+      VdbeSorterIter *pIter1;     /* First iterator to compare */
+      VdbeSorterIter *pIter2;     /* Second iterator to compare */
+      u8 *pKey2;                  /* To pIter2->aKey, or 0 if record cached */
+
+      /* Find the first two iterators to compare. The one that was just
+      ** advanced (iPrev) and the one next to it in the array.  */
+      pIter1 = &pSorter->aIter[(iPrev & 0xFFFE)];
+      pIter2 = &pSorter->aIter[(iPrev | 0x0001)];
+      pKey2 = pIter2->aKey;
+
+      for(i=(pSorter->nTree+iPrev)/2; i>0; i=i/2){
+        /* Compare pIter1 and pIter2. Store the result in variable iRes. */
+        int iRes;
+        if( pIter1->pFile==0 ){
+          iRes = +1;
+        }else if( pIter2->pFile==0 ){
+          iRes = -1;
+        }else{
+          vdbeSorterCompare(pCsr, 0, 
+              pIter1->aKey, pIter1->nKey, pKey2, pIter2->nKey, &iRes
+          );
+        }
+
+        /* If pIter1 contained the smaller value, set aTree[i] to its index.
+        ** Then set pIter2 to the next iterator to compare to pIter1. In this
+        ** case there is no cache of pIter2 in pSorter->pUnpacked, so set
+        ** pKey2 to point to the record belonging to pIter2.
+        **
+        ** Alternatively, if pIter2 contains the smaller of the two values,
+        ** set aTree[i] to its index and update pIter1. If vdbeSorterCompare()
+        ** was actually called above, then pSorter->pUnpacked now contains
+        ** a value equivalent to pIter2. So set pKey2 to NULL to prevent
+        ** vdbeSorterCompare() from decoding pIter2 again.  */
+        if( iRes<=0 ){
+          pSorter->aTree[i] = (int)(pIter1 - pSorter->aIter);
+          pIter2 = &pSorter->aIter[ pSorter->aTree[i ^ 0x0001] ];
+          pKey2 = pIter2->aKey;
+        }else{
+          if( pIter1->pFile ) pKey2 = 0;
+          pSorter->aTree[i] = (int)(pIter2 - pSorter->aIter);
+          pIter1 = &pSorter->aIter[ pSorter->aTree[i ^ 0x0001] ];
+        }
 
-    *pbEof = (pSorter->aIter[pSorter->aTree[1]].pFile==0);
+      }
+      *pbEof = (pSorter->aIter[pSorter->aTree[1]].pFile==0);
+    }
   }else{
     SorterRecord *pFree = pSorter->pRecord;
     pSorter->pRecord = pFree->pNext;
@@ -74962,14 +76086,14 @@ SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *pCsr, Mem *pOut){
 SQLITE_PRIVATE int sqlite3VdbeSorterCompare(
   const VdbeCursor *pCsr,         /* Sorter cursor */
   Mem *pVal,                      /* Value to compare to current sorter key */
-  int nIgnore,                    /* Ignore this many fields at the end */
+  int nKeyCol,                    /* Only compare this many fields */
   int *pRes                       /* OUT: Result of comparison */
 ){
   VdbeSorter *pSorter = pCsr->pSorter;
   void *pKey; int nKey;           /* Sorter key to compare pVal with */
 
   pKey = vdbeSorterRowkey(pSorter, &nKey);
-  vdbeSorterCompare(pCsr, nIgnore, pVal->z, pVal->n, pKey, nKey, pRes);
+  vdbeSorterCompare(pCsr, nKeyCol, pVal->z, pVal->n, pKey, nKey, pRes);
   return SQLITE_OK;
 }
 
@@ -76001,7 +77125,7 @@ static int lookupName(
           }
         }
         if( iCol>=pTab->nCol && sqlite3IsRowid(zCol) && HasRowid(pTab) ){
-          /* IMP: R-24309-18625 */
+          /* IMP: R-51414-32910 */
           /* IMP: R-44911-55124 */
           iCol = -1;
         }
@@ -76357,8 +77481,13 @@ static int resolveExprStep(Walker *pWalker, Expr *pExpr){
             /* EVIDENCE-OF: R-61304-29449 The unlikely(X) function is equivalent to
             ** likelihood(X, 0.0625).
             ** EVIDENCE-OF: R-01283-11636 The unlikely(X) function is short-hand for
-            ** likelihood(X,0.0625). */
-            pExpr->iTable = 62;  /* TUNING:  Default 2nd arg to unlikely() is 0.0625 */
+            ** likelihood(X,0.0625).
+            ** EVIDENCE-OF: R-36850-34127 The likely(X) function is short-hand for
+            ** likelihood(X,0.9375).
+            ** EVIDENCE-OF: R-53436-40973 The likely(X) function is equivalent to
+            ** likelihood(X,0.9375). */
+            /* TUNING: unlikely() probability is 0.0625.  likely() is 0.9375 */
+            pExpr->iTable = pDef->zName[0]=='u' ? 62 : 938;
           }             
         }
       }
@@ -77134,6 +78263,7 @@ SQLITE_PRIVATE void sqlite3ResolveSelfReference(
 SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr){
   int op;
   pExpr = sqlite3ExprSkipCollate(pExpr);
+  if( pExpr->flags & EP_Generic ) return 0;
   op = pExpr->op;
   if( op==TK_SELECT ){
     assert( pExpr->flags&EP_xIsSelect );
@@ -77166,7 +78296,11 @@ SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr){
 ** If a memory allocation error occurs, that fact is recorded in pParse->db
 ** and the pExpr parameter is returned unchanged.
 */
-SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr *pExpr, Token *pCollName){
+SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(
+  Parse *pParse,           /* Parsing context */
+  Expr *pExpr,             /* Add the "COLLATE" clause to this expression */
+  const Token *pCollName   /* Name of collating sequence */
+){
   if( pCollName->n>0 ){
     Expr *pNew = sqlite3ExprAlloc(pParse->db, TK_COLLATE, pCollName, 1);
     if( pNew ){
@@ -77219,6 +78353,7 @@ SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr){
   Expr *p = pExpr;
   while( p ){
     int op = p->op;
+    if( p->flags & EP_Generic ) break;
     if( op==TK_CAST || op==TK_UPLUS ){
       p = p->pLeft;
       continue;
@@ -78050,7 +79185,6 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3 *db, ExprList *p, int flags)
   if( p==0 ) return 0;
   pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) );
   if( pNew==0 ) return 0;
-  pNew->iECursor = 0;
   pNew->nExpr = i = p->nExpr;
   if( (flags & EXPRDUP_REDUCE)==0 ) for(i=1; i<p->nExpr; i+=i){}
   pNew->a = pItem = sqlite3DbMallocRaw(db,  i*sizeof(p->a[0]) );
@@ -78163,7 +79297,6 @@ SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *p, int flags){
   pNew->selFlags = p->selFlags & ~SF_UsesEphemeral;
   pNew->addrOpenEphm[0] = -1;
   pNew->addrOpenEphm[1] = -1;
-  pNew->addrOpenEphm[2] = -1;
   pNew->nSelectRow = p->nSelectRow;
   pNew->pWith = withDup(db, p->pWith);
   return pNew;
@@ -78465,6 +79598,9 @@ SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr *p){
     case TK_FLOAT:
     case TK_BLOB:
       return 0;
+    case TK_COLUMN:
+      assert( p->pTab!=0 );
+      return p->iColumn>=0 && p->pTab->aCol[p->iColumn].notNull==0;
     default:
       return 1;
   }
@@ -78573,6 +79709,40 @@ SQLITE_PRIVATE int sqlite3CodeOnce(Parse *pParse){
 }
 
 /*
+** Generate code that checks the left-most column of index table iCur to see if
+** it contains any NULL entries.  Cause the register at regHasNull to be set
+** to a non-NULL value if iCur contains no NULLs.  Cause register regHasNull
+** to be set to NULL if iCur contains one or more NULL values.
+*/
+static void sqlite3SetHasNullFlag(Vdbe *v, int iCur, int regHasNull){
+  int j1;
+  sqlite3VdbeAddOp2(v, OP_Integer, 0, regHasNull);
+  j1 = sqlite3VdbeAddOp1(v, OP_Rewind, iCur); VdbeCoverage(v);
+  sqlite3VdbeAddOp3(v, OP_Column, iCur, 0, regHasNull);
+  sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG);
+  VdbeComment((v, "first_entry_in(%d)", iCur));
+  sqlite3VdbeJumpHere(v, j1);
+}
+
+
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** The argument is an IN operator with a list (not a subquery) on the 
+** right-hand side.  Return TRUE if that list is constant.
+*/
+static int sqlite3InRhsIsConstant(Expr *pIn){
+  Expr *pLHS;
+  int res;
+  assert( !ExprHasProperty(pIn, EP_xIsSelect) );
+  pLHS = pIn->pLeft;
+  pIn->pLeft = 0;
+  res = sqlite3ExprIsConstant(pIn);
+  pIn->pLeft = pLHS;
+  return res;
+}
+#endif
+
+/*
 ** This function is used by the implementation of the IN (...) operator.
 ** The pX parameter is the expression on the RHS of the IN operator, which
 ** might be either a list of expressions or a subquery.
@@ -78581,7 +79751,7 @@ SQLITE_PRIVATE int sqlite3CodeOnce(Parse *pParse){
 ** be used either to test for membership in the RHS set or to iterate through
 ** all members of the RHS set, skipping duplicates.
 **
-** A cursor is opened on the b-tree object that the RHS of the IN operator
+** A cursor is opened on the b-tree object that is the RHS of the IN operator
 ** and pX->iTable is set to the index of that cursor.
 **
 ** The returned value of this function indicates the b-tree type, as follows:
@@ -78591,6 +79761,8 @@ SQLITE_PRIVATE int sqlite3CodeOnce(Parse *pParse){
 **   IN_INDEX_INDEX_DESC - The cursor was opened on a descending index.
 **   IN_INDEX_EPH        - The cursor was opened on a specially created and
 **                         populated epheremal table.
+**   IN_INDEX_NOOP       - No cursor was allocated.  The IN operator must be
+**                         implemented as a sequence of comparisons.
 **
 ** An existing b-tree might be used if the RHS expression pX is a simple
 ** subquery such as:
@@ -78600,51 +79772,56 @@ SQLITE_PRIVATE int sqlite3CodeOnce(Parse *pParse){
 ** If the RHS of the IN operator is a list or a more complex subquery, then
 ** an ephemeral table might need to be generated from the RHS and then
 ** pX->iTable made to point to the ephermeral table instead of an
-** existing table.  
-**
-** If the prNotFound parameter is 0, then the b-tree will be used to iterate
-** through the set members, skipping any duplicates. In this case an
-** epheremal table must be used unless the selected <column> is guaranteed
+** existing table.
+**
+** The inFlags parameter must contain exactly one of the bits
+** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP.  If inFlags contains
+** IN_INDEX_MEMBERSHIP, then the generated table will be used for a
+** fast membership test.  When the IN_INDEX_LOOP bit is set, the
+** IN index will be used to loop over all values of the RHS of the
+** IN operator.
+**
+** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate
+** through the set members) then the b-tree must not contain duplicates.
+** An epheremal table must be used unless the selected <column> is guaranteed
 ** to be unique - either because it is an INTEGER PRIMARY KEY or it
 ** has a UNIQUE constraint or UNIQUE index.
 **
-** If the prNotFound parameter is not 0, then the b-tree will be used 
-** for fast set membership tests. In this case an epheremal table must 
+** When IN_INDEX_MEMBERSHIP is used (and the b-tree will be used 
+** for fast set membership tests) then an epheremal table must 
 ** be used unless <column> is an INTEGER PRIMARY KEY or an index can 
 ** be found with <column> as its left-most column.
 **
+** If the IN_INDEX_NOOP_OK and IN_INDEX_MEMBERSHIP are both set and
+** if the RHS of the IN operator is a list (not a subquery) then this
+** routine might decide that creating an ephemeral b-tree for membership
+** testing is too expensive and return IN_INDEX_NOOP.  In that case, the
+** calling routine should implement the IN operator using a sequence
+** of Eq or Ne comparison operations.
+**
 ** When the b-tree is being used for membership tests, the calling function
-** needs to know whether or not the structure contains an SQL NULL 
-** value in order to correctly evaluate expressions like "X IN (Y, Z)".
-** If there is any chance that the (...) might contain a NULL value at
+** might need to know whether or not the RHS side of the IN operator
+** contains a NULL.  If prRhsHasNull is not a NULL pointer and 
+** if there is any chance that the (...) might contain a NULL value at
 ** runtime, then a register is allocated and the register number written
-** to *prNotFound. If there is no chance that the (...) contains a
-** NULL value, then *prNotFound is left unchanged.
-**
-** If a register is allocated and its location stored in *prNotFound, then
-** its initial value is NULL.  If the (...) does not remain constant
-** for the duration of the query (i.e. the SELECT within the (...)
-** is a correlated subquery) then the value of the allocated register is
-** reset to NULL each time the subquery is rerun. This allows the
-** caller to use vdbe code equivalent to the following:
-**
-**   if( register==NULL ){
-**     has_null = <test if data structure contains null>
-**     register = 1
-**   }
+** to *prRhsHasNull. If there is no chance that the (...) contains a
+** NULL value, then *prRhsHasNull is left unchanged.
 **
-** in order to avoid running the <test if data structure contains null>
-** test more often than is necessary.
+** If a register is allocated and its location stored in *prRhsHasNull, then
+** the value in that register will be NULL if the b-tree contains one or more
+** NULL values, and it will be some non-NULL value if the b-tree contains no
+** NULL values.
 */
 #ifndef SQLITE_OMIT_SUBQUERY
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){
+SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, u32 inFlags, int *prRhsHasNull){
   Select *p;                            /* SELECT to the right of IN operator */
   int eType = 0;                        /* Type of RHS table. IN_INDEX_* */
   int iTab = pParse->nTab++;            /* Cursor of the RHS table */
-  int mustBeUnique = (prNotFound==0);   /* True if RHS must be unique */
+  int mustBeUnique;                     /* True if RHS must be unique */
   Vdbe *v = sqlite3GetVdbe(pParse);     /* Virtual machine being coded */
 
   assert( pX->op==TK_IN );
+  mustBeUnique = (inFlags & IN_INDEX_LOOP)!=0;
 
   /* Check to see if an existing table or index can be used to
   ** satisfy the query.  This is preferable to generating a new 
@@ -78701,7 +79878,7 @@ SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){
       for(pIdx=pTab->pIndex; pIdx && eType==0 && affinity_ok; pIdx=pIdx->pNext){
         if( (pIdx->aiColumn[0]==iCol)
          && sqlite3FindCollSeq(db, ENC(db), pIdx->azColl[0], 0)==pReq
-         && (!mustBeUnique || (pIdx->nKeyCol==1 && pIdx->onError!=OE_None))
+         && (!mustBeUnique || (pIdx->nKeyCol==1 && IsUniqueIndex(pIdx)))
         ){
           int iAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v);
           sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb);
@@ -78710,9 +79887,9 @@ SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){
           assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 );
           eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0];
 
-          if( prNotFound && !pTab->aCol[iCol].notNull ){
-            *prNotFound = ++pParse->nMem;
-            sqlite3VdbeAddOp2(v, OP_Null, 0, *prNotFound);
+          if( prRhsHasNull && !pTab->aCol[iCol].notNull ){
+            *prRhsHasNull = ++pParse->nMem;
+            sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull);
           }
           sqlite3VdbeJumpHere(v, iAddr);
         }
@@ -78720,22 +79897,36 @@ SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){
     }
   }
 
+  /* If no preexisting index is available for the IN clause
+  ** and IN_INDEX_NOOP is an allowed reply
+  ** and the RHS of the IN operator is a list, not a subquery
+  ** and the RHS is not contant or has two or fewer terms,
+  ** then it is not worth creating an ephermeral table to evaluate
+  ** the IN operator so return IN_INDEX_NOOP.
+  */
+  if( eType==0
+   && (inFlags & IN_INDEX_NOOP_OK)
+   && !ExprHasProperty(pX, EP_xIsSelect)
+   && (!sqlite3InRhsIsConstant(pX) || pX->x.pList->nExpr<=2)
+  ){
+    eType = IN_INDEX_NOOP;
+  }
+     
+
   if( eType==0 ){
-    /* Could not found an existing table or index to use as the RHS b-tree.
+    /* Could not find an existing table or index to use as the RHS b-tree.
     ** We will have to generate an ephemeral table to do the job.
     */
     u32 savedNQueryLoop = pParse->nQueryLoop;
     int rMayHaveNull = 0;
     eType = IN_INDEX_EPH;
-    if( prNotFound ){
-      *prNotFound = rMayHaveNull = ++pParse->nMem;
-      sqlite3VdbeAddOp2(v, OP_Null, 0, *prNotFound);
-    }else{
-      testcase( pParse->nQueryLoop>0 );
+    if( inFlags & IN_INDEX_LOOP ){
       pParse->nQueryLoop = 0;
       if( pX->pLeft->iColumn<0 && !ExprHasProperty(pX, EP_xIsSelect) ){
         eType = IN_INDEX_ROWID;
       }
+    }else if( prRhsHasNull ){
+      *prRhsHasNull = rMayHaveNull = ++pParse->nMem;
     }
     sqlite3CodeSubselect(pParse, pX, rMayHaveNull, eType==IN_INDEX_ROWID);
     pParse->nQueryLoop = savedNQueryLoop;
@@ -78766,15 +79957,9 @@ SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){
 **
 ** If rMayHaveNull is non-zero, that means that the operation is an IN
 ** (not a SELECT or EXISTS) and that the RHS might contains NULLs.
-** Furthermore, the IN is in a WHERE clause and that we really want
-** to iterate over the RHS of the IN operator in order to quickly locate
-** all corresponding LHS elements.  All this routine does is initialize
-** the register given by rMayHaveNull to NULL.  Calling routines will take
-** care of changing this register value to non-NULL if the RHS is NULL-free.
-**
-** If rMayHaveNull is zero, that means that the subquery is being used
-** for membership testing only.  There is no need to initialize any
-** registers to indicate the presence or absence of NULLs on the RHS.
+** All this routine does is initialize the register given by rMayHaveNull
+** to NULL.  Calling routines will take care of changing this register
+** value to non-NULL if the RHS is NULL-free.
 **
 ** For a SELECT or EXISTS operator, return the register that holds the
 ** result.  For IN operators or if an error occurs, the return value is 0.
@@ -78783,10 +79968,10 @@ SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){
 SQLITE_PRIVATE int sqlite3CodeSubselect(
   Parse *pParse,          /* Parsing context */
   Expr *pExpr,            /* The IN, SELECT, or EXISTS operator */
-  int rMayHaveNull,       /* Register that records whether NULLs exist in RHS */
+  int rHasNullFlag,       /* Register that records whether NULLs exist in RHS */
   int isRowid             /* If true, LHS of IN operator is a rowid */
 ){
-  int testAddr = -1;                      /* One-time test address */
+  int jmpIfDynamic = -1;                      /* One-time test address */
   int rReg = 0;                           /* Register storing resulting */
   Vdbe *v = sqlite3GetVdbe(pParse);
   if( NEVER(v==0) ) return 0;
@@ -78803,13 +79988,13 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
   ** save the results, and reuse the same result on subsequent invocations.
   */
   if( !ExprHasProperty(pExpr, EP_VarSelect) ){
-    testAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+    jmpIfDynamic = sqlite3CodeOnce(pParse); VdbeCoverage(v);
   }
 
 #ifndef SQLITE_OMIT_EXPLAIN
   if( pParse->explain==2 ){
     char *zMsg = sqlite3MPrintf(
-        pParse->db, "EXECUTE %s%s SUBQUERY %d", testAddr>=0?"":"CORRELATED ",
+        pParse->db, "EXECUTE %s%s SUBQUERY %d", jmpIfDynamic>=0?"":"CORRELATED ",
         pExpr->op==TK_IN?"LIST":"SCALAR", pParse->iNextSelectId
     );
     sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC);
@@ -78823,10 +80008,6 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
       Expr *pLeft = pExpr->pLeft; /* the LHS of the IN operator */
       KeyInfo *pKeyInfo = 0;      /* Key information */
 
-      if( rMayHaveNull ){
-        sqlite3VdbeAddOp2(v, OP_Null, 0, rMayHaveNull);
-      }
-
       affinity = sqlite3ExprAffinity(pLeft);
 
       /* Whether this is an 'x IN(SELECT...)' or an 'x IN(<exprlist>)'
@@ -78852,6 +80033,7 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
         ** Generate code to write the results of the select into the temporary
         ** table allocated and opened above.
         */
+        Select *pSelect = pExpr->x.pSelect;
         SelectDest dest;
         ExprList *pEList;
 
@@ -78859,13 +80041,15 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
         sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable);
         dest.affSdst = (u8)affinity;
         assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable );
-        pExpr->x.pSelect->iLimit = 0;
+        pSelect->iLimit = 0;
+        testcase( pSelect->selFlags & SF_Distinct );
+        pSelect->selFlags &= ~SF_Distinct;
         testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */
-        if( sqlite3Select(pParse, pExpr->x.pSelect, &dest) ){
+        if( sqlite3Select(pParse, pSelect, &dest) ){
           sqlite3KeyInfoUnref(pKeyInfo);
           return 0;
         }
-        pEList = pExpr->x.pSelect->pEList;
+        pEList = pSelect->pEList;
         assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */
         assert( pEList!=0 );
         assert( pEList->nExpr>0 );
@@ -78896,7 +80080,7 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
         /* Loop through each expression in <exprlist>. */
         r1 = sqlite3GetTempReg(pParse);
         r2 = sqlite3GetTempReg(pParse);
-        sqlite3VdbeAddOp2(v, OP_Null, 0, r2);
+        if( isRowid ) sqlite3VdbeAddOp2(v, OP_Null, 0, r2);
         for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){
           Expr *pE2 = pItem->pExpr;
           int iValToIns;
@@ -78906,9 +80090,9 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
           ** this code only executes once.  Because for a non-constant
           ** expression we need to rerun this code each time.
           */
-          if( testAddr>=0 && !sqlite3ExprIsConstant(pE2) ){
-            sqlite3VdbeChangeToNoop(v, testAddr);
-            testAddr = -1;
+          if( jmpIfDynamic>=0 && !sqlite3ExprIsConstant(pE2) ){
+            sqlite3VdbeChangeToNoop(v, jmpIfDynamic);
+            jmpIfDynamic = -1;
           }
 
           /* Evaluate the expression and insert it into the temp table */
@@ -78978,10 +80162,14 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
     }
   }
 
-  if( testAddr>=0 ){
-    sqlite3VdbeJumpHere(v, testAddr);
+  if( rHasNullFlag ){
+    sqlite3SetHasNullFlag(v, pExpr->iTable, rHasNullFlag);
   }
-  sqlite3ExprCachePop(pParse, 1);
+
+  if( jmpIfDynamic>=0 ){
+    sqlite3VdbeJumpHere(v, jmpIfDynamic);
+  }
+  sqlite3ExprCachePop(pParse);
 
   return rReg;
 }
@@ -79000,7 +80188,7 @@ SQLITE_PRIVATE int sqlite3CodeSubselect(
 ** if the LHS is NULL or if the LHS is not contained within the RHS and the
 ** RHS contains one or more NULL values.
 **
-** This routine generates code will jump to destIfFalse if the LHS is not 
+** This routine generates code that jumps to destIfFalse if the LHS is not 
 ** contained within the RHS.  If due to NULLs we cannot determine if the LHS
 ** is contained in the RHS then jump to destIfNull.  If the LHS is contained
 ** within the RHS then fall through.
@@ -79023,7 +80211,9 @@ static void sqlite3ExprCodeIN(
   v = pParse->pVdbe;
   assert( v!=0 );       /* OOM detected prior to this routine */
   VdbeNoopComment((v, "begin IN expr"));
-  eType = sqlite3FindInIndex(pParse, pExpr, &rRhsHasNull);
+  eType = sqlite3FindInIndex(pParse, pExpr,
+                             IN_INDEX_MEMBERSHIP | IN_INDEX_NOOP_OK,
+                             destIfFalse==destIfNull ? 0 : &rRhsHasNull);
 
   /* Figure out the affinity to use to create a key from the results
   ** of the expression. affinityStr stores a static string suitable for
@@ -79037,86 +80227,118 @@ static void sqlite3ExprCodeIN(
   r1 = sqlite3GetTempReg(pParse);
   sqlite3ExprCode(pParse, pExpr->pLeft, r1);
 
-  /* If the LHS is NULL, then the result is either false or NULL depending
-  ** on whether the RHS is empty or not, respectively.
+  /* If sqlite3FindInIndex() did not find or create an index that is
+  ** suitable for evaluating the IN operator, then evaluate using a
+  ** sequence of comparisons.
   */
-  if( destIfNull==destIfFalse ){
-    /* Shortcut for the common case where the false and NULL outcomes are
-    ** the same. */
-    sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v);
-  }else{
-    int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v);
-    sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
-    VdbeCoverage(v);
-    sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull);
-    sqlite3VdbeJumpHere(v, addr1);
-  }
-
-  if( eType==IN_INDEX_ROWID ){
-    /* In this case, the RHS is the ROWID of table b-tree
-    */
-    sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); VdbeCoverage(v);
-    sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1);
-    VdbeCoverage(v);
+  if( eType==IN_INDEX_NOOP ){
+    ExprList *pList = pExpr->x.pList;
+    CollSeq *pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft);
+    int labelOk = sqlite3VdbeMakeLabel(v);
+    int r2, regToFree;
+    int regCkNull = 0;
+    int ii;
+    assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
+    if( destIfNull!=destIfFalse ){
+      regCkNull = sqlite3GetTempReg(pParse);
+      sqlite3VdbeAddOp3(v, OP_BitAnd, r1, r1, regCkNull);
+    }
+    for(ii=0; ii<pList->nExpr; ii++){
+      r2 = sqlite3ExprCodeTemp(pParse, pList->a[ii].pExpr, &regToFree);
+      if( regCkNull && sqlite3ExprCanBeNull(pList->a[ii].pExpr) ){
+        sqlite3VdbeAddOp3(v, OP_BitAnd, regCkNull, r2, regCkNull);
+      }
+      if( ii<pList->nExpr-1 || destIfNull!=destIfFalse ){
+        sqlite3VdbeAddOp4(v, OP_Eq, r1, labelOk, r2,
+                          (void*)pColl, P4_COLLSEQ);
+        VdbeCoverageIf(v, ii<pList->nExpr-1);
+        VdbeCoverageIf(v, ii==pList->nExpr-1);
+        sqlite3VdbeChangeP5(v, affinity);
+      }else{
+        assert( destIfNull==destIfFalse );
+        sqlite3VdbeAddOp4(v, OP_Ne, r1, destIfFalse, r2,
+                          (void*)pColl, P4_COLLSEQ); VdbeCoverage(v);
+        sqlite3VdbeChangeP5(v, affinity | SQLITE_JUMPIFNULL);
+      }
+      sqlite3ReleaseTempReg(pParse, regToFree);
+    }
+    if( regCkNull ){
+      sqlite3VdbeAddOp2(v, OP_IsNull, regCkNull, destIfNull); VdbeCoverage(v);
+      sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse);
+    }
+    sqlite3VdbeResolveLabel(v, labelOk);
+    sqlite3ReleaseTempReg(pParse, regCkNull);
   }else{
-    /* In this case, the RHS is an index b-tree.
-    */
-    sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1);
-
-    /* If the set membership test fails, then the result of the 
-    ** "x IN (...)" expression must be either 0 or NULL. If the set
-    ** contains no NULL values, then the result is 0. If the set 
-    ** contains one or more NULL values, then the result of the
-    ** expression is also NULL.
+  
+    /* If the LHS is NULL, then the result is either false or NULL depending
+    ** on whether the RHS is empty or not, respectively.
     */
-    if( rRhsHasNull==0 || destIfFalse==destIfNull ){
-      /* This branch runs if it is known at compile time that the RHS
-      ** cannot contain NULL values. This happens as the result
-      ** of a "NOT NULL" constraint in the database schema.
-      **
-      ** Also run this branch if NULL is equivalent to FALSE
-      ** for this particular IN operator.
+    if( sqlite3ExprCanBeNull(pExpr->pLeft) ){
+      if( destIfNull==destIfFalse ){
+        /* Shortcut for the common case where the false and NULL outcomes are
+        ** the same. */
+        sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v);
+      }else{
+        int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v);
+        sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
+        VdbeCoverage(v);
+        sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull);
+        sqlite3VdbeJumpHere(v, addr1);
+      }
+    }
+  
+    if( eType==IN_INDEX_ROWID ){
+      /* In this case, the RHS is the ROWID of table b-tree
       */
-      sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1);
+      sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); VdbeCoverage(v);
+      sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1);
       VdbeCoverage(v);
     }else{
-      /* In this branch, the RHS of the IN might contain a NULL and
-      ** the presence of a NULL on the RHS makes a difference in the
-      ** outcome.
-      */
-      int j1, j2;
-
-      /* First check to see if the LHS is contained in the RHS.  If so,
-      ** then the presence of NULLs in the RHS does not matter, so jump
-      ** over all of the code that follows.
-      */
-      j1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1);
-      VdbeCoverage(v);
-
-      /* Here we begin generating code that runs if the LHS is not
-      ** contained within the RHS.  Generate additional code that
-      ** tests the RHS for NULLs.  If the RHS contains a NULL then
-      ** jump to destIfNull.  If there are no NULLs in the RHS then
-      ** jump to destIfFalse.
+      /* In this case, the RHS is an index b-tree.
       */
-      sqlite3VdbeAddOp2(v, OP_If, rRhsHasNull, destIfNull); VdbeCoverage(v);
-      sqlite3VdbeAddOp2(v, OP_IfNot, rRhsHasNull, destIfFalse); VdbeCoverage(v);
-      j2 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, rRhsHasNull, 1);
-      VdbeCoverage(v);
-      sqlite3VdbeAddOp2(v, OP_Integer, 0, rRhsHasNull);
-      sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse);
-      sqlite3VdbeJumpHere(v, j2);
-      sqlite3VdbeAddOp2(v, OP_Integer, 1, rRhsHasNull);
-      sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull);
-
-      /* The OP_Found at the top of this branch jumps here when true, 
-      ** causing the overall IN expression evaluation to fall through.
+      sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1);
+  
+      /* If the set membership test fails, then the result of the 
+      ** "x IN (...)" expression must be either 0 or NULL. If the set
+      ** contains no NULL values, then the result is 0. If the set 
+      ** contains one or more NULL values, then the result of the
+      ** expression is also NULL.
       */
-      sqlite3VdbeJumpHere(v, j1);
+      assert( destIfFalse!=destIfNull || rRhsHasNull==0 );
+      if( rRhsHasNull==0 ){
+        /* This branch runs if it is known at compile time that the RHS
+        ** cannot contain NULL values. This happens as the result
+        ** of a "NOT NULL" constraint in the database schema.
+        **
+        ** Also run this branch if NULL is equivalent to FALSE
+        ** for this particular IN operator.
+        */
+        sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1);
+        VdbeCoverage(v);
+      }else{
+        /* In this branch, the RHS of the IN might contain a NULL and
+        ** the presence of a NULL on the RHS makes a difference in the
+        ** outcome.
+        */
+        int j1;
+  
+        /* First check to see if the LHS is contained in the RHS.  If so,
+        ** then the answer is TRUE the presence of NULLs in the RHS does
+        ** not matter.  If the LHS is not contained in the RHS, then the
+        ** answer is NULL if the RHS contains NULLs and the answer is
+        ** FALSE if the RHS is NULL-free.
+        */
+        j1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1);
+        VdbeCoverage(v);
+        sqlite3VdbeAddOp2(v, OP_IsNull, rRhsHasNull, destIfNull);
+        VdbeCoverage(v);
+        sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse);
+        sqlite3VdbeJumpHere(v, j1);
+      }
     }
   }
   sqlite3ReleaseTempReg(pParse, r1);
-  sqlite3ExprCachePop(pParse, 1);
+  sqlite3ExprCachePop(pParse);
   VdbeComment((v, "end IN expr"));
 }
 #endif /* SQLITE_OMIT_SUBQUERY */
@@ -79173,7 +80395,7 @@ static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){
     i64 value;
     const char *z = pExpr->u.zToken;
     assert( z!=0 );
-    c = sqlite3Atoi64(z, &value, sqlite3Strlen30(z), SQLITE_UTF8);
+    c = sqlite3DecOrHexToI64(z, &value);
     if( c==0 || (c==2 && negFlag) ){
       char *zV;
       if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; }
@@ -79183,7 +80405,14 @@ static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){
 #ifdef SQLITE_OMIT_FLOATING_POINT
       sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z);
 #else
-      codeReal(v, z, negFlag, iMem);
+#ifndef SQLITE_OMIT_HEX_INTEGER
+      if( sqlite3_strnicmp(z,"0x",2)==0 ){
+        sqlite3ErrorMsg(pParse, "hex literal too big: %s", z);
+      }else
+#endif
+      {
+        codeReal(v, z, negFlag, iMem);
+      }
 #endif
     }
   }
@@ -79299,15 +80528,14 @@ SQLITE_PRIVATE void sqlite3ExprCachePush(Parse *pParse){
 
 /*
 ** Remove from the column cache any entries that were added since the
-** the previous N Push operations.  In other words, restore the cache
-** to the state it was in N Pushes ago.
+** the previous sqlite3ExprCachePush operation.  In other words, restore
+** the cache to the state it was in prior the most recent Push.
 */
-SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse, int N){
+SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse){
   int i;
   struct yColCache *p;
-  assert( N>0 );
-  assert( pParse->iCacheLevel>=N );
-  pParse->iCacheLevel -= N;
+  assert( pParse->iCacheLevel>=1 );
+  pParse->iCacheLevel--;
 #ifdef SQLITE_DEBUG
   if( pParse->db->flags & SQLITE_VdbeAddopTrace ){
     printf("POP  to %d\n", pParse->iCacheLevel);
@@ -79436,7 +80664,7 @@ SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse *pParse, int iFrom, int iTo, int n
   int i;
   struct yColCache *p;
   assert( iFrom>=iTo+nReg || iFrom+nReg<=iTo );
-  sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg-1);
+  sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg);
   for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
     int x = p->iReg;
     if( x>=iFrom && x<iFrom+nReg ){
@@ -79730,7 +80958,7 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target)
       addr = sqlite3VdbeAddOp1(v, op, r1);
       VdbeCoverageIf(v, op==TK_ISNULL);
       VdbeCoverageIf(v, op==TK_NOTNULL);
-      sqlite3VdbeAddOp2(v, OP_AddImm, target, -1);
+      sqlite3VdbeAddOp2(v, OP_Integer, 0, target);
       sqlite3VdbeJumpHere(v, addr);
       break;
     }
@@ -79766,7 +80994,7 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target)
       zId = pExpr->u.zToken;
       nId = sqlite3Strlen30(zId);
       pDef = sqlite3FindFunction(db, zId, nId, nFarg, enc, 0);
-      if( pDef==0 ){
+      if( pDef==0 || pDef->xFunc==0 ){
         sqlite3ErrorMsg(pParse, "unknown function: %.*s()", nId, zId);
         break;
       }
@@ -79785,7 +81013,7 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target)
           sqlite3ExprCacheRemove(pParse, target, 1);
           sqlite3ExprCachePush(pParse);
           sqlite3ExprCode(pParse, pFarg->a[i].pExpr, target);
-          sqlite3ExprCachePop(pParse, 1);
+          sqlite3ExprCachePop(pParse);
         }
         sqlite3VdbeResolveLabel(v, endCoalesce);
         break;
@@ -79837,9 +81065,9 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target)
         }
 
         sqlite3ExprCachePush(pParse);     /* Ticket 2ea2425d34be */
-        sqlite3ExprCodeExprList(pParse, pFarg, r1, 
+        sqlite3ExprCodeExprList(pParse, pFarg, r1,
                                 SQLITE_ECEL_DUP|SQLITE_ECEL_FACTOR);
-        sqlite3ExprCachePop(pParse, 1);   /* Ticket 2ea2425d34be */
+        sqlite3ExprCachePop(pParse);      /* Ticket 2ea2425d34be */
       }else{
         r1 = 0;
       }
@@ -80059,13 +81287,13 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target)
         testcase( aListelem[i+1].pExpr->op==TK_COLUMN );
         sqlite3ExprCode(pParse, aListelem[i+1].pExpr, target);
         sqlite3VdbeAddOp2(v, OP_Goto, 0, endLabel);
-        sqlite3ExprCachePop(pParse, 1);
+        sqlite3ExprCachePop(pParse);
         sqlite3VdbeResolveLabel(v, nextCase);
       }
       if( (nExpr&1)!=0 ){
         sqlite3ExprCachePush(pParse);
         sqlite3ExprCode(pParse, pEList->a[nExpr-1].pExpr, target);
-        sqlite3ExprCachePop(pParse, 1);
+        sqlite3ExprCachePop(pParse);
       }else{
         sqlite3VdbeAddOp2(v, OP_Null, 0, target);
       }
@@ -80644,7 +81872,7 @@ SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse *pParse, Expr *pExpr, int dest, int
       sqlite3ExprCachePush(pParse);
       sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull);
       sqlite3VdbeResolveLabel(v, d2);
-      sqlite3ExprCachePop(pParse, 1);
+      sqlite3ExprCachePop(pParse);
       break;
     }
     case TK_OR: {
@@ -80652,7 +81880,7 @@ SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse *pParse, Expr *pExpr, int dest, int
       sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull);
       sqlite3ExprCachePush(pParse);
       sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull);
-      sqlite3ExprCachePop(pParse, 1);
+      sqlite3ExprCachePop(pParse);
       break;
     }
     case TK_NOT: {
@@ -80798,7 +82026,7 @@ SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse *pParse, Expr *pExpr, int dest, int
       sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull);
       sqlite3ExprCachePush(pParse);
       sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull);
-      sqlite3ExprCachePop(pParse, 1);
+      sqlite3ExprCachePop(pParse);
       break;
     }
     case TK_OR: {
@@ -80808,7 +82036,7 @@ SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse *pParse, Expr *pExpr, int dest, int
       sqlite3ExprCachePush(pParse);
       sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull);
       sqlite3VdbeResolveLabel(v, d2);
-      sqlite3ExprCachePop(pParse, 1);
+      sqlite3ExprCachePop(pParse);
       break;
     }
     case TK_NOT: {
@@ -81472,6 +82700,7 @@ static void renameParentFunc(
   int token;                      /* Type of token */
 
   UNUSED_PARAMETER(NotUsed);
+  if( zInput==0 || zOld==0 ) return;
   for(z=zInput; *z; z=z+n){
     n = sqlite3GetToken(z, &token);
     if( token==TK_REFERENCES ){
@@ -82431,6 +83660,7 @@ static void openStatTable(
     assert( i<ArraySize(aTable) );
     sqlite3VdbeAddOp4Int(v, OP_OpenWrite, iStatCur+i, aRoot[i], iDb, 3);
     sqlite3VdbeChangeP5(v, aCreateTbl[i]);
+    VdbeComment((v, aTable[i].zName));
   }
 }
 
@@ -82466,7 +83696,8 @@ struct Stat4Sample {
 struct Stat4Accum {
   tRowcnt nRow;             /* Number of rows in the entire table */
   tRowcnt nPSample;         /* How often to do a periodic sample */
-  int nCol;                 /* Number of columns in index + rowid */
+  int nCol;                 /* Number of columns in index + pk/rowid */
+  int nKeyCol;              /* Number of index columns w/o the pk/rowid */
   int mxSample;             /* Maximum number of samples to accumulate */
   Stat4Sample current;      /* Current row as a Stat4Sample */
   u32 iPrn;                 /* Pseudo-random number used for sampling */
@@ -82552,9 +83783,22 @@ static void stat4Destructor(void *pOld){
 }
 
 /*
-** Implementation of the stat_init(N,C) SQL function. The two parameters
-** are the number of rows in the table or index (C) and the number of columns
-** in the index (N).  The second argument (C) is only used for STAT3 and STAT4.
+** Implementation of the stat_init(N,K,C) SQL function. The three parameters
+** are:
+**     N:    The number of columns in the index including the rowid/pk (note 1)
+**     K:    The number of columns in the index excluding the rowid/pk.
+**     C:    The number of rows in the index (note 2)
+**
+** Note 1:  In the special case of the covering index that implements a
+** WITHOUT ROWID table, N is the number of PRIMARY KEY columns, not the
+** total number of columns in the table.
+**
+** Note 2:  C is only used for STAT3 and STAT4.
+**
+** For indexes on ordinary rowid tables, N==K+1.  But for indexes on
+** WITHOUT ROWID tables, N=K+P where P is the number of columns in the
+** PRIMARY KEY of the table.  The covering index that implements the
+** original WITHOUT ROWID table as N==K as a special case.
 **
 ** This routine allocates the Stat4Accum object in heap memory. The return 
 ** value is a pointer to the the Stat4Accum object encoded as a blob (i.e. 
@@ -82567,6 +83811,7 @@ static void statInit(
 ){
   Stat4Accum *p;
   int nCol;                       /* Number of columns in index being sampled */
+  int nKeyCol;                    /* Number of key columns */
   int nColUp;                     /* nCol rounded up for alignment */
   int n;                          /* Bytes of space to allocate */
   sqlite3 *db;                    /* Database connection */
@@ -82577,8 +83822,11 @@ static void statInit(
   /* Decode the three function arguments */
   UNUSED_PARAMETER(argc);
   nCol = sqlite3_value_int(argv[0]);
-  assert( nCol>1 );               /* >1 because it includes the rowid column */
+  assert( nCol>0 );
   nColUp = sizeof(tRowcnt)<8 ? (nCol+1)&~1 : nCol;
+  nKeyCol = sqlite3_value_int(argv[1]);
+  assert( nKeyCol<=nCol );
+  assert( nKeyCol>0 );
 
   /* Allocate the space required for the Stat4Accum object */
   n = sizeof(*p) 
@@ -82600,6 +83848,7 @@ static void statInit(
   p->db = db;
   p->nRow = 0;
   p->nCol = nCol;
+  p->nKeyCol = nKeyCol;
   p->current.anDLt = (tRowcnt*)&p[1];
   p->current.anEq = &p->current.anDLt[nColUp];
 
@@ -82610,9 +83859,9 @@ static void statInit(
 
     p->iGet = -1;
     p->mxSample = mxSample;
-    p->nPSample = (tRowcnt)(sqlite3_value_int64(argv[1])/(mxSample/3+1) + 1);
+    p->nPSample = (tRowcnt)(sqlite3_value_int64(argv[2])/(mxSample/3+1) + 1);
     p->current.anLt = &p->current.anEq[nColUp];
-    p->iPrn = nCol*0x689e962d ^ sqlite3_value_int(argv[1])*0xd0944565;
+    p->iPrn = nCol*0x689e962d ^ sqlite3_value_int(argv[2])*0xd0944565;
   
     /* Set up the Stat4Accum.a[] and aBest[] arrays */
     p->a = (struct Stat4Sample*)&p->current.anLt[nColUp];
@@ -82635,7 +83884,7 @@ static void statInit(
   sqlite3_result_blob(context, p, sizeof(p), stat4Destructor);
 }
 static const FuncDef statInitFuncdef = {
-  1+IsStat34,      /* nArg */
+  2+IsStat34,      /* nArg */
   SQLITE_UTF8,     /* funcFlags */
   0,               /* pUserData */
   0,               /* pNext */
@@ -82859,7 +84108,10 @@ static void samplePushPrevious(Stat4Accum *p, int iChng){
 **    R     Rowid for the current row.  Might be a key record for
 **          WITHOUT ROWID tables.
 **
-** The SQL function always returns NULL.
+** This SQL function always returns NULL.  It's purpose it to accumulate
+** statistical data and/or samples in the Stat4Accum object about the
+** index being analyzed.  The stat_get() SQL function will later be used to
+** extract relevant information for constructing the sqlite_statN tables.
 **
 ** The R parameter is only used for STAT3 and STAT4
 */
@@ -82876,7 +84128,7 @@ static void statPush(
 
   UNUSED_PARAMETER( argc );
   UNUSED_PARAMETER( context );
-  assert( p->nCol>1 );        /* Includes rowid field */
+  assert( p->nCol>0 );
   assert( iChng<p->nCol );
 
   if( p->nRow==0 ){
@@ -82953,7 +84205,10 @@ static const FuncDef statPushFuncdef = {
 
 /*
 ** Implementation of the stat_get(P,J) SQL function.  This routine is
-** used to query the results.  Content is returned for parameter J
+** used to query statistical information that has been gathered into
+** the Stat4Accum object by prior calls to stat_push().  The P parameter
+** is a BLOB which is decoded into a pointer to the Stat4Accum objects.
+** The content to returned is determined by the parameter J
 ** which is one of the STAT_GET_xxxx values defined above.
 **
 ** If neither STAT3 nor STAT4 are enabled, then J is always
@@ -83004,7 +84259,7 @@ static void statGet(
     char *z;
     int i;
 
-    char *zRet = sqlite3MallocZero(p->nCol * 25);
+    char *zRet = sqlite3MallocZero( (p->nKeyCol+1)*25 );
     if( zRet==0 ){
       sqlite3_result_error_nomem(context);
       return;
@@ -83012,7 +84267,7 @@ static void statGet(
 
     sqlite3_snprintf(24, zRet, "%llu", (u64)p->nRow);
     z = zRet + sqlite3Strlen30(zRet);
-    for(i=0; i<(p->nCol-1); i++){
+    for(i=0; i<p->nKeyCol; i++){
       u64 nDistinct = p->current.anDLt[i] + 1;
       u64 iVal = (p->nRow + nDistinct - 1) / nDistinct;
       sqlite3_snprintf(24, z, " %llu", iVal);
@@ -83172,27 +84427,27 @@ static void analyzeOneTable(
   sqlite3VdbeAddOp4(v, OP_String8, 0, regTabname, 0, pTab->zName, 0);
 
   for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
-    int nCol;                     /* Number of columns indexed by pIdx */
-    int *aGotoChng;               /* Array of jump instruction addresses */
+    int nCol;                     /* Number of columns in pIdx. "N" */
     int addrRewind;               /* Address of "OP_Rewind iIdxCur" */
-    int addrGotoChng0;            /* Address of "Goto addr_chng_0" */
     int addrNextRow;              /* Address of "next_row:" */
     const char *zIdxName;         /* Name of the index */
+    int nColTest;                 /* Number of columns to test for changes */
 
     if( pOnlyIdx && pOnlyIdx!=pIdx ) continue;
     if( pIdx->pPartIdxWhere==0 ) needTableCnt = 0;
-    VdbeNoopComment((v, "Begin analysis of %s", pIdx->zName));
-    nCol = pIdx->nKeyCol;
-    aGotoChng = sqlite3DbMallocRaw(db, sizeof(int)*(nCol+1));
-    if( aGotoChng==0 ) continue;
-
-    /* Populate the register containing the index name. */
-    if( pIdx->autoIndex==2 && !HasRowid(pTab) ){
+    if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIdx) ){
+      nCol = pIdx->nKeyCol;
       zIdxName = pTab->zName;
+      nColTest = nCol - 1;
     }else{
+      nCol = pIdx->nColumn;
       zIdxName = pIdx->zName;
+      nColTest = pIdx->uniqNotNull ? pIdx->nKeyCol-1 : nCol-1;
     }
+
+    /* Populate the register containing the index name. */
     sqlite3VdbeAddOp4(v, OP_String8, 0, regIdxname, 0, zIdxName, 0);
+    VdbeComment((v, "Analysis for %s.%s", pTab->zName, zIdxName));
 
     /*
     ** Pseudo-code for loop that calls stat_push():
@@ -83217,7 +84472,7 @@ static void analyzeOneTable(
     **   regPrev(1) = idx(1)
     **  ...
     **
-    **  chng_addr_N:
+    **  endDistinctTest:
     **   regRowid = idx(rowid)
     **   stat_push(P, regChng, regRowid)
     **   Next csr
@@ -83230,7 +84485,7 @@ static void analyzeOneTable(
     ** the regPrev array and a trailing rowid (the rowid slot is required
     ** when building a record to insert into the sample column of 
     ** the sqlite_stat4 table.  */
-    pParse->nMem = MAX(pParse->nMem, regPrev+nCol);
+    pParse->nMem = MAX(pParse->nMem, regPrev+nColTest);
 
     /* Open a read-only cursor on the index being analyzed. */
     assert( iDb==sqlite3SchemaToIndex(db, pIdx->pSchema) );
@@ -83240,18 +84495,22 @@ static void analyzeOneTable(
 
     /* Invoke the stat_init() function. The arguments are:
     ** 
-    **    (1) the number of columns in the index including the rowid,
-    **    (2) the number of rows in the index,
+    **    (1) the number of columns in the index including the rowid
+    **        (or for a WITHOUT ROWID table, the number of PK columns),
+    **    (2) the number of columns in the key without the rowid/pk
+    **    (3) the number of rows in the index,
+    **
     **
-    ** The second argument is only used for STAT3 and STAT4
+    ** The third argument is only used for STAT3 and STAT4
     */
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
-    sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regStat4+2);
+    sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regStat4+3);
 #endif
-    sqlite3VdbeAddOp2(v, OP_Integer, nCol+1, regStat4+1);
+    sqlite3VdbeAddOp2(v, OP_Integer, nCol, regStat4+1);
+    sqlite3VdbeAddOp2(v, OP_Integer, pIdx->nKeyCol, regStat4+2);
     sqlite3VdbeAddOp3(v, OP_Function, 0, regStat4+1, regStat4);
     sqlite3VdbeChangeP4(v, -1, (char*)&statInitFuncdef, P4_FUNCDEF);
-    sqlite3VdbeChangeP5(v, 1+IsStat34);
+    sqlite3VdbeChangeP5(v, 2+IsStat34);
 
     /* Implementation of the following:
     **
@@ -83264,44 +84523,62 @@ static void analyzeOneTable(
     addrRewind = sqlite3VdbeAddOp1(v, OP_Rewind, iIdxCur);
     VdbeCoverage(v);
     sqlite3VdbeAddOp2(v, OP_Integer, 0, regChng);
-    addrGotoChng0 = sqlite3VdbeAddOp0(v, OP_Goto);
-
-    /*
-    **  next_row:
-    **   regChng = 0
-    **   if( idx(0) != regPrev(0) ) goto chng_addr_0
-    **   regChng = 1
-    **   if( idx(1) != regPrev(1) ) goto chng_addr_1
-    **   ...
-    **   regChng = N
-    **   goto chng_addr_N
-    */
     addrNextRow = sqlite3VdbeCurrentAddr(v);
-    for(i=0; i<nCol; i++){
-      char *pColl = (char*)sqlite3LocateCollSeq(pParse, pIdx->azColl[i]);
-      sqlite3VdbeAddOp2(v, OP_Integer, i, regChng);
-      sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regTemp);
-      aGotoChng[i] = 
-      sqlite3VdbeAddOp4(v, OP_Ne, regTemp, 0, regPrev+i, pColl, P4_COLLSEQ);
-      sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
-      VdbeCoverage(v);
-    }
-    sqlite3VdbeAddOp2(v, OP_Integer, nCol, regChng);
-    aGotoChng[nCol] = sqlite3VdbeAddOp0(v, OP_Goto);
 
-    /*
-    **  chng_addr_0:
-    **   regPrev(0) = idx(0)
-    **  chng_addr_1:
-    **   regPrev(1) = idx(1)
-    **  ...
-    */
-    sqlite3VdbeJumpHere(v, addrGotoChng0);
-    for(i=0; i<nCol; i++){
-      sqlite3VdbeJumpHere(v, aGotoChng[i]);
-      sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regPrev+i);
-    }
+    if( nColTest>0 ){
+      int endDistinctTest = sqlite3VdbeMakeLabel(v);
+      int *aGotoChng;               /* Array of jump instruction addresses */
+      aGotoChng = sqlite3DbMallocRaw(db, sizeof(int)*nColTest);
+      if( aGotoChng==0 ) continue;
 
+      /*
+      **  next_row:
+      **   regChng = 0
+      **   if( idx(0) != regPrev(0) ) goto chng_addr_0
+      **   regChng = 1
+      **   if( idx(1) != regPrev(1) ) goto chng_addr_1
+      **   ...
+      **   regChng = N
+      **   goto endDistinctTest
+      */
+      sqlite3VdbeAddOp0(v, OP_Goto);
+      addrNextRow = sqlite3VdbeCurrentAddr(v);
+      if( nColTest==1 && pIdx->nKeyCol==1 && IsUniqueIndex(pIdx) ){
+        /* For a single-column UNIQUE index, once we have found a non-NULL
+        ** row, we know that all the rest will be distinct, so skip 
+        ** subsequent distinctness tests. */
+        sqlite3VdbeAddOp2(v, OP_NotNull, regPrev, endDistinctTest);
+        VdbeCoverage(v);
+      }
+      for(i=0; i<nColTest; i++){
+        char *pColl = (char*)sqlite3LocateCollSeq(pParse, pIdx->azColl[i]);
+        sqlite3VdbeAddOp2(v, OP_Integer, i, regChng);
+        sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regTemp);
+        aGotoChng[i] = 
+        sqlite3VdbeAddOp4(v, OP_Ne, regTemp, 0, regPrev+i, pColl, P4_COLLSEQ);
+        sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
+        VdbeCoverage(v);
+      }
+      sqlite3VdbeAddOp2(v, OP_Integer, nColTest, regChng);
+      sqlite3VdbeAddOp2(v, OP_Goto, 0, endDistinctTest);
+  
+  
+      /*
+      **  chng_addr_0:
+      **   regPrev(0) = idx(0)
+      **  chng_addr_1:
+      **   regPrev(1) = idx(1)
+      **  ...
+      */
+      sqlite3VdbeJumpHere(v, addrNextRow-1);
+      for(i=0; i<nColTest; i++){
+        sqlite3VdbeJumpHere(v, aGotoChng[i]);
+        sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regPrev+i);
+      }
+      sqlite3VdbeResolveLabel(v, endDistinctTest);
+      sqlite3DbFree(db, aGotoChng);
+    }
+  
     /*
     **  chng_addr_N:
     **   regRowid = idx(rowid)            // STAT34 only
@@ -83309,7 +84586,6 @@ static void analyzeOneTable(
     **   Next csr
     **   if !eof(csr) goto next_row;
     */
-    sqlite3VdbeJumpHere(v, aGotoChng[nCol]);
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
     assert( regRowid==(regStat4+2) );
     if( HasRowid(pTab) ){
@@ -83353,7 +84629,7 @@ static void analyzeOneTable(
       int addrIsNull;
       u8 seekOp = HasRowid(pTab) ? OP_NotExists : OP_NotFound;
 
-      pParse->nMem = MAX(pParse->nMem, regCol+nCol+1);
+      pParse->nMem = MAX(pParse->nMem, regCol+nCol);
 
       addrNext = sqlite3VdbeCurrentAddr(v);
       callStatGet(v, regStat4, STAT_GET_ROWID, regSampleRowid);
@@ -83375,7 +84651,7 @@ static void analyzeOneTable(
         i16 iCol = pIdx->aiColumn[i];
         sqlite3ExprCodeGetColumnOfTable(v, pTab, iTabCur, iCol, regCol+i);
       }
-      sqlite3VdbeAddOp3(v, OP_MakeRecord, regCol, nCol+1, regSample);
+      sqlite3VdbeAddOp3(v, OP_MakeRecord, regCol, nCol, regSample);
 #endif
       sqlite3VdbeAddOp3(v, OP_MakeRecord, regTabname, 6, regTemp);
       sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur+1, regNewRowid);
@@ -83387,7 +84663,6 @@ static void analyzeOneTable(
 
     /* End of analysis */
     sqlite3VdbeJumpHere(v, addrRewind);
-    sqlite3DbFree(db, aGotoChng);
   }
 
 
@@ -83488,6 +84763,7 @@ SQLITE_PRIVATE void sqlite3Analyze(Parse *pParse, Token *pName1, Token *pName2){
   Table *pTab;
   Index *pIdx;
   Token *pTableName;
+  Vdbe *v;
 
   /* Read the database schema. If an error occurs, leave an error message
   ** and code in pParse and return NULL. */
@@ -83535,6 +84811,8 @@ SQLITE_PRIVATE void sqlite3Analyze(Parse *pParse, Token *pName1, Token *pName2){
       }
     }   
   }
+  v = sqlite3GetVdbe(pParse);
+  if( v ) sqlite3VdbeAddOp0(v, OP_Expire);
 }
 
 /*
@@ -83556,6 +84834,7 @@ static void decodeIntArray(
   char *zIntArray,       /* String containing int array to decode */
   int nOut,              /* Number of slots in aOut[] */
   tRowcnt *aOut,         /* Store integers here */
+  LogEst *aLog,          /* Or, if aOut==0, here */
   Index *pIndex          /* Handle extra flags for this index, if not NULL */
 ){
   char *z = zIntArray;
@@ -83574,7 +84853,17 @@ static void decodeIntArray(
       v = v*10 + c - '0';
       z++;
     }
-    aOut[i] = v;
+#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
+    if( aOut ){
+      aOut[i] = v;
+    }else
+#else
+    assert( aOut==0 );
+    UNUSED_PARAMETER(aOut);
+#endif
+    {
+      aLog[i] = sqlite3LogEst(v);
+    }
     if( *z==' ' ) z++;
   }
 #ifndef SQLITE_ENABLE_STAT3_OR_STAT4
@@ -83582,14 +84871,19 @@ static void decodeIntArray(
 #else
   if( pIndex )
 #endif
-  {
-    if( strcmp(z, "unordered")==0 ){
+  while( z[0] ){
+    if( sqlite3_strglob("unordered*", z)==0 ){
       pIndex->bUnordered = 1;
     }else if( sqlite3_strglob("sz=[0-9]*", z)==0 ){
-      int v32 = 0;
-      sqlite3GetInt32(z+3, &v32);
-      pIndex->szIdxRow = sqlite3LogEst(v32);
+      pIndex->szIdxRow = sqlite3LogEst(sqlite3Atoi(z+3));
+    }
+#ifdef SQLITE_ENABLE_COSTMULT
+    else if( sqlite3_strglob("costmult=[0-9]*",z)==0 ){
+      pIndex->pTable->costMult = sqlite3LogEst(sqlite3Atoi(z+9));
     }
+#endif
+    while( z[0]!=0 && z[0]!=' ' ) z++;
+    while( z[0]==' ' ) z++;
   }
 }
 
@@ -83630,12 +84924,16 @@ static int analysisLoader(void *pData, int argc, char **argv, char **NotUsed){
   z = argv[2];
 
   if( pIndex ){
-    decodeIntArray((char*)z, pIndex->nKeyCol+1, pIndex->aiRowEst, pIndex);
-    if( pIndex->pPartIdxWhere==0 ) pTable->nRowEst = pIndex->aiRowEst[0];
+    pIndex->bUnordered = 0;
+    decodeIntArray((char*)z, pIndex->nKeyCol+1, 0, pIndex->aiRowLogEst, pIndex);
+    if( pIndex->pPartIdxWhere==0 ) pTable->nRowLogEst = pIndex->aiRowLogEst[0];
   }else{
     Index fakeIdx;
     fakeIdx.szIdxRow = pTable->szTabRow;
-    decodeIntArray((char*)z, 1, &pTable->nRowEst, &fakeIdx);
+#ifdef SQLITE_ENABLE_COSTMULT
+    fakeIdx.pTable = pTable;
+#endif
+    decodeIntArray((char*)z, 1, 0, &pTable->nRowLogEst, &fakeIdx);
     pTable->szTabRow = fakeIdx.szIdxRow;
   }
 
@@ -83676,7 +84974,16 @@ static void initAvgEq(Index *pIdx){
     IndexSample *aSample = pIdx->aSample;
     IndexSample *pFinal = &aSample[pIdx->nSample-1];
     int iCol;
-    for(iCol=0; iCol<pIdx->nKeyCol; iCol++){
+    int nCol = 1;
+    if( pIdx->nSampleCol>1 ){
+      /* If this is stat4 data, then calculate aAvgEq[] values for all
+      ** sample columns except the last. The last is always set to 1, as
+      ** once the trailing PK fields are considered all index keys are
+      ** unique.  */
+      nCol = pIdx->nSampleCol-1;
+      pIdx->aAvgEq[nCol] = 1;
+    }
+    for(iCol=0; iCol<nCol; iCol++){
       int i;                    /* Used to iterate through samples */
       tRowcnt sumEq = 0;        /* Sum of the nEq values */
       tRowcnt nSum = 0;         /* Number of terms contributing to sumEq */
@@ -83699,7 +85006,6 @@ static void initAvgEq(Index *pIdx){
       }
       if( avgEq==0 ) avgEq = 1;
       pIdx->aAvgEq[iCol] = avgEq;
-      if( pIdx->nSampleCol==1 ) break;
     }
   }
 }
@@ -83758,7 +85064,6 @@ static int loadStatTbl(
 
   while( sqlite3_step(pStmt)==SQLITE_ROW ){
     int nIdxCol = 1;              /* Number of columns in stat4 records */
-    int nAvgCol = 1;              /* Number of entries in Index.aAvgEq */
 
     char *zIndex;   /* Index name */
     Index *pIdx;    /* Pointer to the index object */
@@ -83776,13 +85081,17 @@ static int loadStatTbl(
     ** loaded from the stat4 table. In this case ignore stat3 data.  */
     if( pIdx==0 || pIdx->nSample ) continue;
     if( bStat3==0 ){
-      nIdxCol = pIdx->nKeyCol+1;
-      nAvgCol = pIdx->nKeyCol;
+      assert( !HasRowid(pIdx->pTable) || pIdx->nColumn==pIdx->nKeyCol+1 );
+      if( !HasRowid(pIdx->pTable) && IsPrimaryKeyIndex(pIdx) ){
+        nIdxCol = pIdx->nKeyCol;
+      }else{
+        nIdxCol = pIdx->nColumn;
+      }
     }
     pIdx->nSampleCol = nIdxCol;
     nByte = sizeof(IndexSample) * nSample;
     nByte += sizeof(tRowcnt) * nIdxCol * 3 * nSample;
-    nByte += nAvgCol * sizeof(tRowcnt);     /* Space for Index.aAvgEq[] */
+    nByte += nIdxCol * sizeof(tRowcnt);     /* Space for Index.aAvgEq[] */
 
     pIdx->aSample = sqlite3DbMallocZero(db, nByte);
     if( pIdx->aSample==0 ){
@@ -83790,7 +85099,7 @@ static int loadStatTbl(
       return SQLITE_NOMEM;
     }
     pSpace = (tRowcnt*)&pIdx->aSample[nSample];
-    pIdx->aAvgEq = pSpace; pSpace += nAvgCol;
+    pIdx->aAvgEq = pSpace; pSpace += nIdxCol;
     for(i=0; i<nSample; i++){
       pIdx->aSample[i].anEq = pSpace; pSpace += nIdxCol;
       pIdx->aSample[i].anLt = pSpace; pSpace += nIdxCol;
@@ -83827,9 +85136,9 @@ static int loadStatTbl(
       pPrevIdx = pIdx;
     }
     pSample = &pIdx->aSample[pIdx->nSample];
-    decodeIntArray((char*)sqlite3_column_text(pStmt,1), nCol, pSample->anEq, 0);
-    decodeIntArray((char*)sqlite3_column_text(pStmt,2), nCol, pSample->anLt, 0);
-    decodeIntArray((char*)sqlite3_column_text(pStmt,3), nCol, pSample->anDLt,0);
+    decodeIntArray((char*)sqlite3_column_text(pStmt,1),nCol,pSample->anEq,0,0);
+    decodeIntArray((char*)sqlite3_column_text(pStmt,2),nCol,pSample->anLt,0,0);
+    decodeIntArray((char*)sqlite3_column_text(pStmt,3),nCol,pSample->anDLt,0,0);
 
     /* Take a copy of the sample. Add two 0x00 bytes the end of the buffer.
     ** This is in case the sample record is corrupted. In that case, the
@@ -84900,6 +86209,19 @@ static void codeTableLocks(Parse *pParse){
 #endif
 
 /*
+** Return TRUE if the given yDbMask object is empty - if it contains no
+** 1 bits.  This routine is used by the DbMaskAllZero() and DbMaskNotZero()
+** macros when SQLITE_MAX_ATTACHED is greater than 30.
+*/
+#if SQLITE_MAX_ATTACHED>30
+SQLITE_PRIVATE int sqlite3DbMaskAllZero(yDbMask m){
+  int i;
+  for(i=0; i<sizeof(yDbMask); i++) if( m[i] ) return 0;
+  return 1;
+}
+#endif
+
+/*
 ** This routine is called after a single SQL statement has been
 ** parsed and a VDBE program to execute that statement has been
 ** prepared.  This routine puts the finishing touches on the
@@ -84935,18 +86257,19 @@ SQLITE_PRIVATE void sqlite3FinishCoding(Parse *pParse){
     ** transaction on each used database and to verify the schema cookie
     ** on each used database.
     */
-    if( db->mallocFailed==0 && (pParse->cookieMask || pParse->pConstExpr) ){
-      yDbMask mask;
+    if( db->mallocFailed==0 
+     && (DbMaskNonZero(pParse->cookieMask) || pParse->pConstExpr)
+    ){
       int iDb, i;
       assert( sqlite3VdbeGetOp(v, 0)->opcode==OP_Init );
       sqlite3VdbeJumpHere(v, 0);
-      for(iDb=0, mask=1; iDb<db->nDb; mask<<=1, iDb++){
-        if( (mask & pParse->cookieMask)==0 ) continue;
+      for(iDb=0; iDb<db->nDb; iDb++){
+        if( DbMaskTest(pParse->cookieMask, iDb)==0 ) continue;
         sqlite3VdbeUsesBtree(v, iDb);
         sqlite3VdbeAddOp4Int(v,
           OP_Transaction,                    /* Opcode */
           iDb,                               /* P1 */
-          (mask & pParse->writeMask)!=0,     /* P2 */
+          DbMaskTest(pParse->writeMask,iDb), /* P2 */
           pParse->cookieValue[iDb],          /* P3 */
           db->aDb[iDb].pSchema->iGeneration  /* P4 */
         );
@@ -85002,7 +86325,7 @@ SQLITE_PRIVATE void sqlite3FinishCoding(Parse *pParse){
   pParse->nMem = 0;
   pParse->nSet = 0;
   pParse->nVar = 0;
-  pParse->cookieMask = 0;
+  DbMaskZero(pParse->cookieMask);
 }
 
 /*
@@ -85543,7 +86866,7 @@ SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *pParse, const char *zName){
 */
 SQLITE_PRIVATE Index *sqlite3PrimaryKeyIndex(Table *pTab){
   Index *p;
-  for(p=pTab->pIndex; p && p->autoIndex!=2; p=p->pNext){}
+  for(p=pTab->pIndex; p && !IsPrimaryKeyIndex(p); p=p->pNext){}
   return p;
 }
 
@@ -85691,7 +87014,7 @@ SQLITE_PRIVATE void sqlite3StartTable(
   pTable->iPKey = -1;
   pTable->pSchema = db->aDb[iDb].pSchema;
   pTable->nRef = 1;
-  pTable->nRowEst = 1048576;
+  pTable->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
   assert( pParse->pNewTable==0 );
   pParse->pNewTable = pTable;
 
@@ -86072,7 +87395,7 @@ SQLITE_PRIVATE void sqlite3AddPrimaryKey(
     p = sqlite3CreateIndex(pParse, 0, 0, 0, pList, onError, 0,
                            0, sortOrder, 0);
     if( p ){
-      p->autoIndex = 2;
+      p->idxType = SQLITE_IDXTYPE_PRIMARYKEY;
       if( v ) sqlite3VdbeJumpHere(v, pParse->addrSkipPK);
     }
     pList = 0;
@@ -86092,7 +87415,10 @@ SQLITE_PRIVATE void sqlite3AddCheckConstraint(
 ){
 #ifndef SQLITE_OMIT_CHECK
   Table *pTab = pParse->pNewTable;
-  if( pTab && !IN_DECLARE_VTAB ){
+  sqlite3 *db = pParse->db;
+  if( pTab && !IN_DECLARE_VTAB
+   && !sqlite3BtreeIsReadonly(db->aDb[db->init.iDb].pBt)
+  ){
     pTab->pCheck = sqlite3ExprListAppend(pParse, pTab->pCheck, pCheckExpr);
     if( pParse->constraintName.n ){
       sqlite3ExprListSetName(pParse, pTab->pCheck, &pParse->constraintName, 1);
@@ -86444,7 +87770,7 @@ static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){
     assert( pParse->pNewTable==pTab );
     pPk = sqlite3CreateIndex(pParse, 0, 0, 0, pList, pTab->keyConf, 0, 0, 0, 0);
     if( pPk==0 ) return;
-    pPk->autoIndex = 2;
+    pPk->idxType = SQLITE_IDXTYPE_PRIMARYKEY;
     pTab->iPKey = -1;
   }else{
     pPk = sqlite3PrimaryKeyIndex(pTab);
@@ -86467,7 +87793,7 @@ static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){
   */
   for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
     int n;
-    if( pIdx->autoIndex==2 ) continue;
+    if( IsPrimaryKeyIndex(pIdx) ) continue;
     for(i=n=0; i<nPk; i++){
       if( !hasColumn(pIdx->aiColumn, pIdx->nKeyCol, pPk->aiColumn[i]) ) n++;
     }
@@ -86899,7 +88225,7 @@ SQLITE_PRIVATE int sqlite3ViewGetColumnNames(Parse *pParse, Table *pTable){
       pSelTab->aCol = 0;
       sqlite3DeleteTable(db, pSelTab);
       assert( sqlite3SchemaMutexHeld(db, 0, pTable->pSchema) );
-      pTable->pSchema->flags |= DB_UnresetViews;
+      pTable->pSchema->schemaFlags |= DB_UnresetViews;
     }else{
       pTable->nCol = 0;
       nErr++;
@@ -87466,7 +88792,7 @@ static void sqlite3RefillIndex(Parse *pParse, Index *pIndex, int memRootPage){
 
   sqlite3GenerateIndexKey(pParse,pIndex,iTab,regRecord,0,&iPartIdxLabel,0,0);
   sqlite3VdbeAddOp2(v, OP_SorterInsert, iSorter, regRecord);
-  sqlite3VdbeResolveLabel(v, iPartIdxLabel);
+  sqlite3ResolvePartIdxLabel(pParse, iPartIdxLabel);
   sqlite3VdbeAddOp2(v, OP_Next, iTab, addr1+1); VdbeCoverage(v);
   sqlite3VdbeJumpHere(v, addr1);
   if( memRootPage<0 ) sqlite3VdbeAddOp2(v, OP_Clear, tnum, iDb);
@@ -87476,12 +88802,12 @@ static void sqlite3RefillIndex(Parse *pParse, Index *pIndex, int memRootPage){
 
   addr1 = sqlite3VdbeAddOp2(v, OP_SorterSort, iSorter, 0); VdbeCoverage(v);
   assert( pKey!=0 || db->mallocFailed || pParse->nErr );
-  if( pIndex->onError!=OE_None && pKey!=0 ){
+  if( IsUniqueIndex(pIndex) && pKey!=0 ){
     int j2 = sqlite3VdbeCurrentAddr(v) + 3;
     sqlite3VdbeAddOp2(v, OP_Goto, 0, j2);
     addr2 = sqlite3VdbeCurrentAddr(v);
     sqlite3VdbeAddOp4Int(v, OP_SorterCompare, iSorter, j2, regRecord,
-                         pKey->nField - pIndex->nKeyCol); VdbeCoverage(v);
+                         pIndex->nKeyCol); VdbeCoverage(v);
     sqlite3UniqueConstraint(pParse, OE_Abort, pIndex);
   }else{
     addr2 = sqlite3VdbeCurrentAddr(v);
@@ -87516,15 +88842,15 @@ SQLITE_PRIVATE Index *sqlite3AllocateIndexObject(
 
   nByte = ROUND8(sizeof(Index)) +              /* Index structure  */
           ROUND8(sizeof(char*)*nCol) +         /* Index.azColl     */
-          ROUND8(sizeof(tRowcnt)*(nCol+1) +    /* Index.aiRowEst   */
+          ROUND8(sizeof(LogEst)*(nCol+1) +     /* Index.aiRowLogEst   */
                  sizeof(i16)*nCol +            /* Index.aiColumn   */
                  sizeof(u8)*nCol);             /* Index.aSortOrder */
   p = sqlite3DbMallocZero(db, nByte + nExtra);
   if( p ){
     char *pExtra = ((char*)p)+ROUND8(sizeof(Index));
-    p->azColl = (char**)pExtra;      pExtra += ROUND8(sizeof(char*)*nCol);
-    p->aiRowEst = (tRowcnt*)pExtra;  pExtra += sizeof(tRowcnt)*(nCol+1);
-    p->aiColumn = (i16*)pExtra;      pExtra += sizeof(i16)*nCol;
+    p->azColl = (char**)pExtra;       pExtra += ROUND8(sizeof(char*)*nCol);
+    p->aiRowLogEst = (LogEst*)pExtra; pExtra += sizeof(LogEst)*(nCol+1);
+    p->aiColumn = (i16*)pExtra;       pExtra += sizeof(i16)*nCol;
     p->aSortOrder = (u8*)pExtra;
     p->nColumn = nCol;
     p->nKeyCol = nCol - 1;
@@ -87547,7 +88873,7 @@ SQLITE_PRIVATE Index *sqlite3AllocateIndexObject(
 **
 ** If the index is created successfully, return a pointer to the new Index
 ** structure. This is used by sqlite3AddPrimaryKey() to mark the index
-** as the tables primary key (Index.autoIndex==2).
+** as the tables primary key (Index.idxType==SQLITE_IDXTYPE_PRIMARYKEY)
 */
 SQLITE_PRIVATE Index *sqlite3CreateIndex(
   Parse *pParse,     /* All information about this parse */
@@ -87754,7 +89080,7 @@ SQLITE_PRIVATE Index *sqlite3CreateIndex(
   if( db->mallocFailed ){
     goto exit_create_index;
   }
-  assert( EIGHT_BYTE_ALIGNMENT(pIndex->aiRowEst) );
+  assert( EIGHT_BYTE_ALIGNMENT(pIndex->aiRowLogEst) );
   assert( EIGHT_BYTE_ALIGNMENT(pIndex->azColl) );
   pIndex->zName = zExtra;
   zExtra += nName + 1;
@@ -87762,7 +89088,7 @@ SQLITE_PRIVATE Index *sqlite3CreateIndex(
   pIndex->pTable = pTab;
   pIndex->onError = (u8)onError;
   pIndex->uniqNotNull = onError!=OE_None;
-  pIndex->autoIndex = (u8)(pName==0);
+  pIndex->idxType = pName ? SQLITE_IDXTYPE_APPDEF : SQLITE_IDXTYPE_UNIQUE;
   pIndex->pSchema = db->aDb[iDb].pSchema;
   pIndex->nKeyCol = pList->nExpr;
   if( pPIWhere ){
@@ -87873,9 +89199,9 @@ SQLITE_PRIVATE Index *sqlite3CreateIndex(
     Index *pIdx;
     for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
       int k;
-      assert( pIdx->onError!=OE_None );
-      assert( pIdx->autoIndex );
-      assert( pIndex->onError!=OE_None );
+      assert( IsUniqueIndex(pIdx) );
+      assert( pIdx->idxType!=SQLITE_IDXTYPE_APPDEF );
+      assert( IsUniqueIndex(pIndex) );
 
       if( pIdx->nKeyCol!=pIndex->nKeyCol ) continue;
       for(k=0; k<pIdx->nKeyCol; k++){
@@ -88035,7 +89361,7 @@ exit_create_index:
 ** Since we do not know, guess 1 million.  aiRowEst[1] is an estimate of the
 ** number of rows in the table that match any particular value of the
 ** first column of the index.  aiRowEst[2] is an estimate of the number
-** of rows that match any particular combiniation of the first 2 columns
+** of rows that match any particular combination of the first 2 columns
 ** of the index.  And so forth.  It must always be the case that
 *
 **           aiRowEst[N]<=aiRowEst[N-1]
@@ -88046,20 +89372,27 @@ exit_create_index:
 ** are based on typical values found in actual indices.
 */
 SQLITE_PRIVATE void sqlite3DefaultRowEst(Index *pIdx){
-  tRowcnt *a = pIdx->aiRowEst;
+  /*                10,  9,  8,  7,  6 */
+  LogEst aVal[] = { 33, 32, 30, 28, 26 };
+  LogEst *a = pIdx->aiRowLogEst;
+  int nCopy = MIN(ArraySize(aVal), pIdx->nKeyCol);
   int i;
-  tRowcnt n;
-  assert( a!=0 );
-  a[0] = pIdx->pTable->nRowEst;
-  if( a[0]<10 ) a[0] = 10;
-  n = 10;
-  for(i=1; i<=pIdx->nKeyCol; i++){
-    a[i] = n;
-    if( n>5 ) n--;
-  }
-  if( pIdx->onError!=OE_None ){
-    a[pIdx->nKeyCol] = 1;
+
+  /* Set the first entry (number of rows in the index) to the estimated 
+  ** number of rows in the table. Or 10, if the estimated number of rows 
+  ** in the table is less than that.  */
+  a[0] = pIdx->pTable->nRowLogEst;
+  if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
+
+  /* Estimate that a[1] is 10, a[2] is 9, a[3] is 8, a[4] is 7, a[5] is
+  ** 6 and each subsequent value (if any) is 5.  */
+  memcpy(&a[1], aVal, nCopy*sizeof(LogEst));
+  for(i=nCopy+1; i<=pIdx->nKeyCol; i++){
+    a[i] = 23;                    assert( 23==sqlite3LogEst(5) );
   }
+
+  assert( 0==sqlite3LogEst(1) );
+  if( IsUniqueIndex(pIdx) ) a[pIdx->nKeyCol] = 0;
 }
 
 /*
@@ -88090,7 +89423,7 @@ SQLITE_PRIVATE void sqlite3DropIndex(Parse *pParse, SrcList *pName, int ifExists
     pParse->checkSchema = 1;
     goto exit_drop_index;
   }
-  if( pIndex->autoIndex ){
+  if( pIndex->idxType!=SQLITE_IDXTYPE_APPDEF ){
     sqlite3ErrorMsg(pParse, "index associated with UNIQUE "
       "or PRIMARY KEY constraint cannot be dropped", 0);
     goto exit_drop_index;
@@ -88619,15 +89952,13 @@ SQLITE_PRIVATE int sqlite3OpenTempDatabase(Parse *pParse){
 SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse *pParse, int iDb){
   Parse *pToplevel = sqlite3ParseToplevel(pParse);
   sqlite3 *db = pToplevel->db;
-  yDbMask mask;
 
   assert( iDb>=0 && iDb<db->nDb );
   assert( db->aDb[iDb].pBt!=0 || iDb==1 );
   assert( iDb<SQLITE_MAX_ATTACHED+2 );
   assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
-  mask = ((yDbMask)1)<<iDb;
-  if( (pToplevel->cookieMask & mask)==0 ){
-    pToplevel->cookieMask |= mask;
+  if( DbMaskTest(pToplevel->cookieMask, iDb)==0 ){
+    DbMaskSet(pToplevel->cookieMask, iDb);
     pToplevel->cookieValue[iDb] = db->aDb[iDb].pSchema->schema_cookie;
     if( !OMIT_TEMPDB && iDb==1 ){
       sqlite3OpenTempDatabase(pToplevel);
@@ -88666,7 +89997,7 @@ SQLITE_PRIVATE void sqlite3CodeVerifyNamedSchema(Parse *pParse, const char *zDb)
 SQLITE_PRIVATE void sqlite3BeginWriteOperation(Parse *pParse, int setStatement, int iDb){
   Parse *pToplevel = sqlite3ParseToplevel(pParse);
   sqlite3CodeVerifySchema(pParse, iDb);
-  pToplevel->writeMask |= ((yDbMask)1)<<iDb;
+  DbMaskSet(pToplevel->writeMask, iDb);
   pToplevel->isMultiWrite |= setStatement;
 }
 
@@ -88749,7 +90080,8 @@ SQLITE_PRIVATE void sqlite3UniqueConstraint(
   }
   zErr = sqlite3StrAccumFinish(&errMsg);
   sqlite3HaltConstraint(pParse, 
-    (pIdx->autoIndex==2)?SQLITE_CONSTRAINT_PRIMARYKEY:SQLITE_CONSTRAINT_UNIQUE,
+    IsPrimaryKeyIndex(pIdx) ? SQLITE_CONSTRAINT_PRIMARYKEY 
+                            : SQLITE_CONSTRAINT_UNIQUE,
     onError, zErr, P4_DYNAMIC, P5_ConstraintUnique);
 }
 
@@ -89472,9 +90804,9 @@ SQLITE_PRIVATE void sqlite3SchemaClear(void *p){
   sqlite3HashClear(&temp1);
   sqlite3HashClear(&pSchema->fkeyHash);
   pSchema->pSeqTab = 0;
-  if( pSchema->flags & DB_SchemaLoaded ){
+  if( pSchema->schemaFlags & DB_SchemaLoaded ){
     pSchema->iGeneration++;
-    pSchema->flags &= ~DB_SchemaLoaded;
+    pSchema->schemaFlags &= ~DB_SchemaLoaded;
   }
 }
 
@@ -90243,7 +91575,7 @@ SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(
                                  &iPartIdxLabel, pPrior, r1);
     sqlite3VdbeAddOp3(v, OP_IdxDelete, iIdxCur+i, r1,
                       pIdx->uniqNotNull ? pIdx->nKeyCol : pIdx->nColumn);
-    sqlite3VdbeResolveLabel(v, iPartIdxLabel);
+    sqlite3ResolvePartIdxLabel(pParse, iPartIdxLabel);
     pPrior = pIdx;
   }
 }
@@ -90262,10 +91594,11 @@ SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(
 **
 ** If *piPartIdxLabel is not NULL, fill it in with a label and jump
 ** to that label if pIdx is a partial index that should be skipped.
+** The label should be resolved using sqlite3ResolvePartIdxLabel().
 ** A partial index should be skipped if its WHERE clause evaluates
 ** to false or null.  If pIdx is not a partial index, *piPartIdxLabel
 ** will be set to zero which is an empty label that is ignored by
-** sqlite3VdbeResolveLabel().
+** sqlite3ResolvePartIdxLabel().
 **
 ** The pPrior and regPrior parameters are used to implement a cache to
 ** avoid unnecessary register loads.  If pPrior is not NULL, then it is
@@ -90298,6 +91631,7 @@ SQLITE_PRIVATE int sqlite3GenerateIndexKey(
     if( pIdx->pPartIdxWhere ){
       *piPartIdxLabel = sqlite3VdbeMakeLabel(v);
       pParse->iPartIdxTab = iDataCur;
+      sqlite3ExprCachePush(pParse);
       sqlite3ExprIfFalse(pParse, pIdx->pPartIdxWhere, *piPartIdxLabel, 
                          SQLITE_JUMPIFNULL);
     }else{
@@ -90326,6 +91660,18 @@ SQLITE_PRIVATE int sqlite3GenerateIndexKey(
   return regBase;
 }
 
+/*
+** If a prior call to sqlite3GenerateIndexKey() generated a jump-over label
+** because it was a partial index, then this routine should be called to
+** resolve that label.
+*/
+SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse *pParse, int iLabel){
+  if( iLabel ){
+    sqlite3VdbeResolveLabel(pParse->pVdbe, iLabel);
+    sqlite3ExprCachePop(pParse);
+  }
+}
+
 /************** End of delete.c **********************************************/
 /************** Begin file func.c ********************************************/
 /*
@@ -90339,12 +91685,9 @@ SQLITE_PRIVATE int sqlite3GenerateIndexKey(
 **    May you share freely, never taking more than you give.
 **
 *************************************************************************
-** This file contains the C functions that implement various SQL
-** functions of SQLite.  
-**
-** There is only one exported symbol in this file - the function
-** sqliteRegisterBuildinFunctions() found at the bottom of the file.
-** All other code has file scope.
+** This file contains the C-language implementions for many of the SQL
+** functions of SQLite.  (Some function, and in particular the date and
+** time functions, are implemented separately.)
 */
 /* #include <stdlib.h> */
 /* #include <assert.h> */
@@ -91869,7 +93212,7 @@ static void groupConcatStep(
     }
     zVal = (char*)sqlite3_value_text(argv[0]);
     nVal = sqlite3_value_bytes(argv[0]);
-    if( nVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal);
+    if( zVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal);
   }
 }
 static void groupConcatFinalize(sqlite3_context *context){
@@ -92019,6 +93362,7 @@ SQLITE_PRIVATE void sqlite3RegisterGlobalFunctions(void){
     FUNCTION2(ifnull,            2, 0, 0, noopFunc,  SQLITE_FUNC_COALESCE),
     FUNCTION2(unlikely,          1, 0, 0, noopFunc,  SQLITE_FUNC_UNLIKELY),
     FUNCTION2(likelihood,        2, 0, 0, noopFunc,  SQLITE_FUNC_UNLIKELY),
+    FUNCTION2(likely,            1, 0, 0, noopFunc,  SQLITE_FUNC_UNLIKELY),
     VFUNCTION(random,            0, 0, 0, randomFunc       ),
     VFUNCTION(randomblob,        1, 0, 0, randomBlob       ),
     FUNCTION(nullif,             2, 0, 1, nullifFunc       ),
@@ -92305,7 +93649,7 @@ SQLITE_PRIVATE int sqlite3FkLocateIndex(
   }
 
   for(pIdx=pParent->pIndex; pIdx; pIdx=pIdx->pNext){
-    if( pIdx->nKeyCol==nCol && pIdx->onError!=OE_None ){ 
+    if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) ){ 
       /* pIdx is a UNIQUE index (or a PRIMARY KEY) and has the right number
       ** of columns. If each indexed column corresponds to a foreign key
       ** column of pFKey, then this index is a winner.  */
@@ -92313,8 +93657,8 @@ SQLITE_PRIVATE int sqlite3FkLocateIndex(
       if( zKey==0 ){
         /* If zKey is NULL, then this foreign key is implicitly mapped to 
         ** the PRIMARY KEY of table pParent. The PRIMARY KEY index may be 
-        ** identified by the test (Index.autoIndex==2).  */
-        if( pIdx->autoIndex==2 ){
+        ** identified by the test.  */
+        if( IsPrimaryKeyIndex(pIdx) ){
           if( aiCol ){
             int i;
             for(i=0; i<nCol; i++) aiCol[i] = pFKey->aCol[i].iFrom;
@@ -94059,6 +95403,7 @@ SQLITE_PRIVATE void sqlite3Insert(
       if( j>=pTab->nCol ){
         if( sqlite3IsRowid(pColumn->a[i].zName) && !withoutRowid ){
           ipkColumn = i;
+          bIdListInOrder = 0;
         }else{
           sqlite3ErrorMsg(pParse, "table %S has no column named %s",
               pTabList, 0, pColumn->a[i].zName);
@@ -94907,7 +96252,7 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(
           ** KEY values of this row before the update.  */
           int addrJump = sqlite3VdbeCurrentAddr(v)+pPk->nKeyCol;
           int op = OP_Ne;
-          int regCmp = (pIdx->autoIndex==2 ? regIdx : regR);
+          int regCmp = (IsPrimaryKeyIndex(pIdx) ? regIdx : regR);
   
           for(i=0; i<pPk->nKeyCol; i++){
             char *p4 = (char*)sqlite3LocateCollSeq(pParse, pPk->azColl[i]);
@@ -95008,7 +96353,7 @@ SQLITE_PRIVATE void sqlite3CompleteInsertion(
     sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i]);
     pik_flags = 0;
     if( useSeekResult ) pik_flags = OPFLAG_USESEEKRESULT;
-    if( pIdx->autoIndex==2 && !HasRowid(pTab) ){
+    if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){
       assert( pParse->nested==0 );
       pik_flags |= OPFLAG_NCHANGE;
     }
@@ -95094,7 +96439,7 @@ SQLITE_PRIVATE int sqlite3OpenTableAndIndices(
   for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
     int iIdxCur = iBase++;
     assert( pIdx->pSchema==pTab->pSchema );
-    if( pIdx->autoIndex==2 && !HasRowid(pTab) && piDataCur ){
+    if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) && piDataCur ){
       *piDataCur = iIdxCur;
     }
     if( aToOpen==0 || aToOpen[i+1] ){
@@ -95310,18 +96655,27 @@ static int xferOptimization(
     return 0;   /* Both tables must have the same INTEGER PRIMARY KEY */
   }
   for(i=0; i<pDest->nCol; i++){
-    if( pDest->aCol[i].affinity!=pSrc->aCol[i].affinity ){
+    Column *pDestCol = &pDest->aCol[i];
+    Column *pSrcCol = &pSrc->aCol[i];
+    if( pDestCol->affinity!=pSrcCol->affinity ){
       return 0;    /* Affinity must be the same on all columns */
     }
-    if( !xferCompatibleCollation(pDest->aCol[i].zColl, pSrc->aCol[i].zColl) ){
+    if( !xferCompatibleCollation(pDestCol->zColl, pSrcCol->zColl) ){
       return 0;    /* Collating sequence must be the same on all columns */
     }
-    if( pDest->aCol[i].notNull && !pSrc->aCol[i].notNull ){
+    if( pDestCol->notNull && !pSrcCol->notNull ){
       return 0;    /* tab2 must be NOT NULL if tab1 is */
     }
+    /* Default values for second and subsequent columns need to match. */
+    if( i>0
+     && ((pDestCol->zDflt==0)!=(pSrcCol->zDflt==0) 
+         || (pDestCol->zDflt && strcmp(pDestCol->zDflt, pSrcCol->zDflt)!=0))
+    ){
+      return 0;    /* Default values must be the same for all columns */
+    }
   }
   for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){
-    if( pDestIdx->onError!=OE_None ){
+    if( IsUniqueIndex(pDestIdx) ){
       destHasUniqueIdx = 1;
     }
     for(pSrcIdx=pSrc->pIndex; pSrcIdx; pSrcIdx=pSrcIdx->pNext){
@@ -95551,6 +96905,9 @@ SQLITE_API int sqlite3_exec(
           }
         }
         if( xCallback(pArg, nCol, azVals, azCols) ){
+          /* EVIDENCE-OF: R-38229-40159 If the callback function to
+          ** sqlite3_exec() returns non-zero, then sqlite3_exec() will
+          ** return SQLITE_ABORT. */
           rc = SQLITE_ABORT;
           sqlite3VdbeFinalize((Vdbe *)pStmt);
           pStmt = 0;
@@ -97328,7 +98685,7 @@ static const struct sPragmaNames {
 ** to support legacy SQL code.  The safety level used to be boolean
 ** and older scripts may have used numbers 0 for OFF and 1 for ON.
 */
-static u8 getSafetyLevel(const char *z, int omitFull, int dflt){
+static u8 getSafetyLevel(const char *z, int omitFull, u8 dflt){
                              /* 123456789 123456789 */
   static const char zText[] = "onoffalseyestruefull";
   static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16};
@@ -97350,7 +98707,7 @@ static u8 getSafetyLevel(const char *z, int omitFull, int dflt){
 /*
 ** Interpret the given string as a boolean value.
 */
-SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z, int dflt){
+SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z, u8 dflt){
   return getSafetyLevel(z,1,dflt)!=0;
 }
 
@@ -97896,7 +99253,7 @@ SQLITE_PRIVATE void sqlite3Pragma(
     Pager *pPager = sqlite3BtreePager(pDb->pBt);
     i64 iLimit = -2;
     if( zRight ){
-      sqlite3Atoi64(zRight, &iLimit, sqlite3Strlen30(zRight), SQLITE_UTF8);
+      sqlite3DecOrHexToI64(zRight, &iLimit);
       if( iLimit<-1 ) iLimit = -1;
     }
     iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit);
@@ -98024,7 +99381,7 @@ SQLITE_PRIVATE void sqlite3Pragma(
     assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
     if( zRight ){
       int ii;
-      sqlite3Atoi64(zRight, &sz, sqlite3Strlen30(zRight), SQLITE_UTF8);
+      sqlite3DecOrHexToI64(zRight, &sz);
       if( sz<0 ) sz = sqlite3GlobalConfig.szMmap;
       if( pId2->n==0 ) db->szMmap = sz;
       for(ii=db->nDb-1; ii>=0; ii--){
@@ -98336,13 +99693,15 @@ SQLITE_PRIVATE void sqlite3Pragma(
       sqlite3VdbeAddOp2(v, OP_Null, 0, 2);
       sqlite3VdbeAddOp2(v, OP_Integer,
                            (int)sqlite3LogEstToInt(pTab->szTabRow), 3);
-      sqlite3VdbeAddOp2(v, OP_Integer, (int)pTab->nRowEst, 4);
+      sqlite3VdbeAddOp2(v, OP_Integer, 
+          (int)sqlite3LogEstToInt(pTab->nRowLogEst), 4);
       sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4);
       for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
         sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0);
         sqlite3VdbeAddOp2(v, OP_Integer,
                              (int)sqlite3LogEstToInt(pIdx->szIdxRow), 3);
-        sqlite3VdbeAddOp2(v, OP_Integer, (int)pIdx->aiRowEst[0], 4);
+        sqlite3VdbeAddOp2(v, OP_Integer, 
+            (int)sqlite3LogEstToInt(pIdx->aiRowLogEst[0]), 4);
         sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4);
       }
     }
@@ -98390,7 +99749,7 @@ SQLITE_PRIVATE void sqlite3Pragma(
       for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){
         sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
         sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0);
-        sqlite3VdbeAddOp2(v, OP_Integer, pIdx->onError!=OE_None, 3);
+        sqlite3VdbeAddOp2(v, OP_Integer, IsUniqueIndex(pIdx), 3);
         sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
       }
     }
@@ -98640,9 +99999,8 @@ SQLITE_PRIVATE void sqlite3Pragma(
     */
     static const int iLn = VDBE_OFFSET_LINENO(2);
     static const VdbeOpList endCode[] = {
-      { OP_AddImm,      1, 0,        0},    /* 0 */
-      { OP_IfNeg,       1, 0,        0},    /* 1 */
-      { OP_String8,     0, 3,        0},    /* 2 */
+      { OP_IfNeg,       1, 0,        0},    /* 0 */
+      { OP_String8,     0, 3,        0},    /* 1 */
       { OP_ResultRow,   3, 1,        0},
     };
 
@@ -98723,7 +100081,7 @@ SQLITE_PRIVATE void sqlite3Pragma(
       sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
          sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName),
          P4_DYNAMIC);
-      sqlite3VdbeAddOp2(v, OP_Move, 2, 4);
+      sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1);
       sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2);
       sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1);
       sqlite3VdbeJumpHere(v, addr);
@@ -98754,29 +100112,77 @@ SQLITE_PRIVATE void sqlite3Pragma(
         pParse->nMem = MAX(pParse->nMem, 8+j);
         sqlite3VdbeAddOp2(v, OP_Rewind, iDataCur, 0); VdbeCoverage(v);
         loopTop = sqlite3VdbeAddOp2(v, OP_AddImm, 7, 1);
+        /* Verify that all NOT NULL columns really are NOT NULL */
+        for(j=0; j<pTab->nCol; j++){
+          char *zErr;
+          int jmp2, jmp3;
+          if( j==pTab->iPKey ) continue;
+          if( pTab->aCol[j].notNull==0 ) continue;
+          sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, j, 3);
+          sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG);
+          jmp2 = sqlite3VdbeAddOp1(v, OP_NotNull, 3); VdbeCoverage(v);
+          sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */
+          zErr = sqlite3MPrintf(db, "NULL value in %s.%s", pTab->zName,
+                              pTab->aCol[j].zName);
+          sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC);
+          sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1);
+          jmp3 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v);
+          sqlite3VdbeAddOp0(v, OP_Halt);
+          sqlite3VdbeJumpHere(v, jmp2);
+          sqlite3VdbeJumpHere(v, jmp3);
+        }
+        /* Validate index entries for the current row */
         for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
-          int jmp2, jmp3, jmp4;
+          int jmp2, jmp3, jmp4, jmp5;
+          int ckUniq = sqlite3VdbeMakeLabel(v);
           if( pPk==pIdx ) continue;
           r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3,
                                        pPrior, r1);
           pPrior = pIdx;
           sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1);  /* increment entry count */
-          jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, 0, r1,
+          /* Verify that an index entry exists for the current table row */
+          jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1,
                                       pIdx->nColumn); VdbeCoverage(v);
           sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */
           sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, "row ", P4_STATIC);
           sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3);
-          sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, " missing from index ",
-                            P4_STATIC);
+          sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, 
+                            " missing from index ", P4_STATIC);
           sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3);
-          sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, pIdx->zName, P4_TRANSIENT);
+          jmp5 = sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0,
+                                   pIdx->zName, P4_TRANSIENT);
           sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3);
           sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1);
           jmp4 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v);
           sqlite3VdbeAddOp0(v, OP_Halt);
-          sqlite3VdbeJumpHere(v, jmp4);
           sqlite3VdbeJumpHere(v, jmp2);
-          sqlite3VdbeResolveLabel(v, jmp3);
+          /* For UNIQUE indexes, verify that only one entry exists with the
+          ** current key.  The entry is unique if (1) any column is NULL
+          ** or (2) the next entry has a different key */
+          if( IsUniqueIndex(pIdx) ){
+            int uniqOk = sqlite3VdbeMakeLabel(v);
+            int jmp6;
+            int kk;
+            for(kk=0; kk<pIdx->nKeyCol; kk++){
+              int iCol = pIdx->aiColumn[kk];
+              assert( iCol>=0 && iCol<pTab->nCol );
+              if( pTab->aCol[iCol].notNull ) continue;
+              sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk);
+              VdbeCoverage(v);
+            }
+            jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v);
+            sqlite3VdbeAddOp2(v, OP_Goto, 0, uniqOk);
+            sqlite3VdbeJumpHere(v, jmp6);
+            sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1,
+                                 pIdx->nKeyCol); VdbeCoverage(v);
+            sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */
+            sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
+                              "non-unique entry in index ", P4_STATIC);
+            sqlite3VdbeAddOp2(v, OP_Goto, 0, jmp5);
+            sqlite3VdbeResolveLabel(v, uniqOk);
+          }
+          sqlite3VdbeJumpHere(v, jmp4);
+          sqlite3ResolvePartIdxLabel(pParse, jmp3);
         }
         sqlite3VdbeAddOp2(v, OP_Next, iDataCur, loopTop); VdbeCoverage(v);
         sqlite3VdbeJumpHere(v, loopTop-1);
@@ -98800,9 +100206,9 @@ SQLITE_PRIVATE void sqlite3Pragma(
       } 
     }
     addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode, iLn);
-    sqlite3VdbeChangeP2(v, addr, -mxErr);
-    sqlite3VdbeJumpHere(v, addr+1);
-    sqlite3VdbeChangeP4(v, addr+2, "ok", P4_STATIC);
+    sqlite3VdbeChangeP3(v, addr, -mxErr);
+    sqlite3VdbeJumpHere(v, addr);
+    sqlite3VdbeChangeP4(v, addr+1, "ok", P4_STATIC);
   }
   break;
 #endif /* SQLITE_OMIT_INTEGRITY_CHECK */
@@ -99065,7 +100471,7 @@ SQLITE_PRIVATE void sqlite3Pragma(
   */
   case PragTyp_SOFT_HEAP_LIMIT: {
     sqlite3_int64 N;
-    if( zRight && sqlite3Atoi64(zRight, &N, 1000000, SQLITE_UTF8)==SQLITE_OK ){
+    if( zRight && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK ){
       sqlite3_soft_heap_limit64(N);
     }
     returnSingleInt(pParse, "soft_heap_limit",  sqlite3_soft_heap_limit64(-1));
@@ -100061,6 +101467,34 @@ SQLITE_API int sqlite3_prepare16_v2(
 ** to handle SELECT statements in SQLite.
 */
 
+/*
+** An instance of the following object is used to record information about
+** how to process the DISTINCT keyword, to simplify passing that information
+** into the selectInnerLoop() routine.
+*/
+typedef struct DistinctCtx DistinctCtx;
+struct DistinctCtx {
+  u8 isTnct;      /* True if the DISTINCT keyword is present */
+  u8 eTnctType;   /* One of the WHERE_DISTINCT_* operators */
+  int tabTnct;    /* Ephemeral table used for DISTINCT processing */
+  int addrTnct;   /* Address of OP_OpenEphemeral opcode for tabTnct */
+};
+
+/*
+** An instance of the following object is used to record information about
+** the ORDER BY (or GROUP BY) clause of query is being coded.
+*/
+typedef struct SortCtx SortCtx;
+struct SortCtx {
+  ExprList *pOrderBy;   /* The ORDER BY (or GROUP BY clause) */
+  int nOBSat;           /* Number of ORDER BY terms satisfied by indices */
+  int iECursor;         /* Cursor number for the sorter */
+  int regReturn;        /* Register holding block-output return address */
+  int labelBkOut;       /* Start label for the block-output subroutine */
+  int addrSortIndex;    /* Address of the OP_SorterOpen or OP_OpenEphemeral */
+  u8 sortFlags;         /* Zero or more SORTFLAG_* bits */
+};
+#define SORTFLAG_UseSorter  0x01   /* Use SorterOpen instead of OpenEphemeral */
 
 /*
 ** Delete all the content of a Select structure but do not deallocate
@@ -100134,7 +101568,6 @@ SQLITE_PRIVATE Select *sqlite3SelectNew(
   assert( pOffset==0 || pLimit!=0 );
   pNew->addrOpenEphm[0] = -1;
   pNew->addrOpenEphm[1] = -1;
-  pNew->addrOpenEphm[2] = -1;
   if( db->mallocFailed ) {
     clearSelect(db, pNew);
     if( pNew!=&standin ) sqlite3DbFree(db, pNew);
@@ -100466,34 +101899,73 @@ static int sqliteProcessJoin(Parse *pParse, Select *p){
   return 0;
 }
 
+/* Forward reference */
+static KeyInfo *keyInfoFromExprList(
+  Parse *pParse,       /* Parsing context */
+  ExprList *pList,     /* Form the KeyInfo object from this ExprList */
+  int iStart,          /* Begin with this column of pList */
+  int nExtra           /* Add this many extra columns to the end */
+);
+
 /*
-** Insert code into "v" that will push the record on the top of the
-** stack into the sorter.
+** Insert code into "v" that will push the record in register regData
+** into the sorter.
 */
 static void pushOntoSorter(
   Parse *pParse,         /* Parser context */
-  ExprList *pOrderBy,    /* The ORDER BY clause */
+  SortCtx *pSort,        /* Information about the ORDER BY clause */
   Select *pSelect,       /* The whole SELECT statement */
   int regData            /* Register holding data to be sorted */
 ){
   Vdbe *v = pParse->pVdbe;
-  int nExpr = pOrderBy->nExpr;
-  int regBase = sqlite3GetTempRange(pParse, nExpr+2);
-  int regRecord = sqlite3GetTempReg(pParse);
+  int nExpr = pSort->pOrderBy->nExpr;
+  int regRecord = ++pParse->nMem;
+  int regBase = pParse->nMem+1;
+  int nOBSat = pSort->nOBSat;
   int op;
+
+  pParse->nMem += nExpr+2;        /* nExpr+2 registers allocated at regBase */
   sqlite3ExprCacheClear(pParse);
-  sqlite3ExprCodeExprList(pParse, pOrderBy, regBase, 0);
-  sqlite3VdbeAddOp2(v, OP_Sequence, pOrderBy->iECursor, regBase+nExpr);
+  sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, 0);
+  sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr);
   sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+1, 1);
-  sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nExpr + 2, regRecord);
-  if( pSelect->selFlags & SF_UseSorter ){
+  sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nExpr+2-nOBSat,regRecord);
+  if( nOBSat>0 ){
+    int regPrevKey;   /* The first nOBSat columns of the previous row */
+    int addrFirst;    /* Address of the OP_IfNot opcode */
+    int addrJmp;      /* Address of the OP_Jump opcode */
+    VdbeOp *pOp;      /* Opcode that opens the sorter */
+    int nKey;         /* Number of sorting key columns, including OP_Sequence */
+    KeyInfo *pKI;     /* Original KeyInfo on the sorter table */
+
+    regPrevKey = pParse->nMem+1;
+    pParse->nMem += pSort->nOBSat;
+    nKey = nExpr - pSort->nOBSat + 1;
+    addrFirst = sqlite3VdbeAddOp1(v, OP_IfNot, regBase+nExpr); VdbeCoverage(v);
+    sqlite3VdbeAddOp3(v, OP_Compare, regPrevKey, regBase, pSort->nOBSat);
+    pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex);
+    if( pParse->db->mallocFailed ) return;
+    pOp->p2 = nKey + 1;
+    pKI = pOp->p4.pKeyInfo;
+    memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */
+    sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO);
+    pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat, 1);
+    addrJmp = sqlite3VdbeCurrentAddr(v);
+    sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v);
+    pSort->labelBkOut = sqlite3VdbeMakeLabel(v);
+    pSort->regReturn = ++pParse->nMem;
+    sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut);
+    sqlite3VdbeAddOp1(v, OP_ResetSorter, pSort->iECursor);
+    sqlite3VdbeJumpHere(v, addrFirst);
+    sqlite3VdbeAddOp3(v, OP_Move, regBase, regPrevKey, pSort->nOBSat);
+    sqlite3VdbeJumpHere(v, addrJmp);
+  }
+  if( pSort->sortFlags & SORTFLAG_UseSorter ){
     op = OP_SorterInsert;
   }else{
     op = OP_IdxInsert;
   }
-  sqlite3VdbeAddOp2(v, op, pOrderBy->iECursor, regRecord);
-  sqlite3ReleaseTempReg(pParse, regRecord);
-  sqlite3ReleaseTempRange(pParse, regBase, nExpr+2);
+  sqlite3VdbeAddOp2(v, op, pSort->iECursor, regRecord);
   if( pSelect->iLimit ){
     int addr1, addr2;
     int iLimit;
@@ -100506,8 +101978,8 @@ static void pushOntoSorter(
     sqlite3VdbeAddOp2(v, OP_AddImm, iLimit, -1);
     addr2 = sqlite3VdbeAddOp0(v, OP_Goto);
     sqlite3VdbeJumpHere(v, addr1);
-    sqlite3VdbeAddOp1(v, OP_Last, pOrderBy->iECursor);
-    sqlite3VdbeAddOp1(v, OP_Delete, pOrderBy->iECursor);
+    sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor);
+    sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor);
     sqlite3VdbeJumpHere(v, addr2);
   }
 }
@@ -100520,10 +101992,9 @@ static void codeOffset(
   int iOffset,      /* Register holding the offset counter */
   int iContinue     /* Jump here to skip the current record */
 ){
-  if( iOffset>0 && iContinue!=0 ){
+  if( iOffset>0 ){
     int addr;
-    sqlite3VdbeAddOp2(v, OP_AddImm, iOffset, -1);
-    addr = sqlite3VdbeAddOp1(v, OP_IfNeg, iOffset); VdbeCoverage(v);
+    addr = sqlite3VdbeAddOp3(v, OP_IfNeg, iOffset, 0, -1); VdbeCoverage(v);
     sqlite3VdbeAddOp2(v, OP_Goto, 0, iContinue);
     VdbeComment((v, "skip OFFSET records"));
     sqlite3VdbeJumpHere(v, addr);
@@ -100582,19 +102053,6 @@ static int checkForMultiColumnSelectError(
 #endif
 
 /*
-** An instance of the following object is used to record information about
-** how to process the DISTINCT keyword, to simplify passing that information
-** into the selectInnerLoop() routine.
-*/
-typedef struct DistinctCtx DistinctCtx;
-struct DistinctCtx {
-  u8 isTnct;      /* True if the DISTINCT keyword is present */
-  u8 eTnctType;   /* One of the WHERE_DISTINCT_* operators */
-  int tabTnct;    /* Ephemeral table used for DISTINCT processing */
-  int addrTnct;   /* Address of OP_OpenEphemeral opcode for tabTnct */
-};
-
-/*
 ** This routine generates the code for the inside of the inner loop
 ** of a SELECT.
 **
@@ -100608,7 +102066,7 @@ static void selectInnerLoop(
   Select *p,              /* The complete select statement being coded */
   ExprList *pEList,       /* List of values being extracted */
   int srcTab,             /* Pull data from this table */
-  ExprList *pOrderBy,     /* If not NULL, sort results using this key */
+  SortCtx *pSort,         /* If not NULL, info on how to process ORDER BY */
   DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */
   SelectDest *pDest,      /* How to dispose of the results */
   int iContinue,          /* Jump here to continue with next row */
@@ -100625,7 +102083,9 @@ static void selectInnerLoop(
   assert( v );
   assert( pEList!=0 );
   hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP;
-  if( pOrderBy==0 && !hasDistinct ){
+  if( pSort && pSort->pOrderBy==0 ) pSort = 0;
+  if( pSort==0 && !hasDistinct ){
+    assert( iContinue!=0 );
     codeOffset(v, p->iOffset, iContinue);
   }
 
@@ -100699,7 +102159,7 @@ static void selectInnerLoop(
           sqlite3VdbeChangeP4(v, -1, (const char *)pColl, P4_COLLSEQ);
           sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
         }
-        assert( sqlite3VdbeCurrentAddr(v)==iJump );
+        assert( sqlite3VdbeCurrentAddr(v)==iJump || pParse->db->mallocFailed );
         sqlite3VdbeAddOp3(v, OP_Copy, regResult, regPrev, nResultCol-1);
         break;
       }
@@ -100715,7 +102175,7 @@ static void selectInnerLoop(
         break;
       }
     }
-    if( pOrderBy==0 ){
+    if( pSort==0 ){
       codeOffset(v, p->iOffset, iContinue);
     }
   }
@@ -100746,7 +102206,8 @@ static void selectInnerLoop(
 
     /* Store the result as data using a unique key.
     */
-    case SRT_DistTable:
+    case SRT_Fifo:
+    case SRT_DistFifo:
     case SRT_Table:
     case SRT_EphemTab: {
       int r1 = sqlite3GetTempReg(pParse);
@@ -100754,8 +102215,8 @@ static void selectInnerLoop(
       testcase( eDest==SRT_EphemTab );
       sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1);
 #ifndef SQLITE_OMIT_CTE
-      if( eDest==SRT_DistTable ){
-        /* If the destination is DistTable, then cursor (iParm+1) is open
+      if( eDest==SRT_DistFifo ){
+        /* If the destination is DistFifo, then cursor (iParm+1) is open
         ** on an ephemeral index. If the current row is already present
         ** in the index, do not write it to the output. If not, add the
         ** current row to the index and proceed with writing it to the
@@ -100763,11 +102224,11 @@ static void selectInnerLoop(
         int addr = sqlite3VdbeCurrentAddr(v) + 4;
         sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0); VdbeCoverage(v);
         sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r1);
-        assert( pOrderBy==0 );
+        assert( pSort==0 );
       }
 #endif
-      if( pOrderBy ){
-        pushOntoSorter(pParse, pOrderBy, p, r1);
+      if( pSort ){
+        pushOntoSorter(pParse, pSort, p, r1);
       }else{
         int r2 = sqlite3GetTempReg(pParse);
         sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2);
@@ -100788,12 +102249,12 @@ static void selectInnerLoop(
       assert( nResultCol==1 );
       pDest->affSdst =
                   sqlite3CompareAffinity(pEList->a[0].pExpr, pDest->affSdst);
-      if( pOrderBy ){
+      if( pSort ){
         /* At first glance you would think we could optimize out the
         ** ORDER BY in this case since the order of entries in the set
         ** does not matter.  But there might be a LIMIT clause, in which
         ** case the order does matter */
-        pushOntoSorter(pParse, pOrderBy, p, regResult);
+        pushOntoSorter(pParse, pSort, p, regResult);
       }else{
         int r1 = sqlite3GetTempReg(pParse);
         sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult,1,r1, &pDest->affSdst, 1);
@@ -100818,8 +102279,8 @@ static void selectInnerLoop(
     */
     case SRT_Mem: {
       assert( nResultCol==1 );
-      if( pOrderBy ){
-        pushOntoSorter(pParse, pOrderBy, p, regResult);
+      if( pSort ){
+        pushOntoSorter(pParse, pSort, p, regResult);
       }else{
         sqlite3ExprCodeMove(pParse, regResult, iParm, 1);
         /* The LIMIT clause will jump out of the loop for us */
@@ -100832,10 +102293,10 @@ static void selectInnerLoop(
     case SRT_Output: {        /* Return the results */
       testcase( eDest==SRT_Coroutine );
       testcase( eDest==SRT_Output );
-      if( pOrderBy ){
+      if( pSort ){
         int r1 = sqlite3GetTempReg(pParse);
         sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1);
-        pushOntoSorter(pParse, pOrderBy, p, r1);
+        pushOntoSorter(pParse, pSort, p, r1);
         sqlite3ReleaseTempReg(pParse, r1);
       }else if( eDest==SRT_Coroutine ){
         sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm);
@@ -100912,7 +102373,7 @@ static void selectInnerLoop(
   ** there is a sorter, in which case the sorter has already limited
   ** the output for us.
   */
-  if( pOrderBy==0 && p->iLimit ){
+  if( pSort==0 && p->iLimit ){
     sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1); VdbeCoverage(v);
   }
 }
@@ -100983,7 +102444,12 @@ SQLITE_PRIVATE int sqlite3KeyInfoIsWriteable(KeyInfo *p){ return p->nRef==1; }
 ** function is responsible for seeing that this structure is eventually
 ** freed.
 */
-static KeyInfo *keyInfoFromExprList(Parse *pParse, ExprList *pList, int nExtra){
+static KeyInfo *keyInfoFromExprList(
+  Parse *pParse,       /* Parsing context */
+  ExprList *pList,     /* Form the KeyInfo object from this ExprList */
+  int iStart,          /* Begin with this column of pList */
+  int nExtra           /* Add this many extra columns to the end */
+){
   int nExpr;
   KeyInfo *pInfo;
   struct ExprList_item *pItem;
@@ -100991,15 +102457,15 @@ static KeyInfo *keyInfoFromExprList(Parse *pParse, ExprList *pList, int nExtra){
   int i;
 
   nExpr = pList->nExpr;
-  pInfo = sqlite3KeyInfoAlloc(db, nExpr+nExtra, 1);
+  pInfo = sqlite3KeyInfoAlloc(db, nExpr+nExtra-iStart, 1);
   if( pInfo ){
     assert( sqlite3KeyInfoIsWriteable(pInfo) );
-    for(i=0, pItem=pList->a; i<nExpr; i++, pItem++){
+    for(i=iStart, pItem=pList->a+iStart; i<nExpr; i++, pItem++){
       CollSeq *pColl;
       pColl = sqlite3ExprCollSeq(pParse, pItem->pExpr);
       if( !pColl ) pColl = db->pDfltColl;
-      pInfo->aColl[i] = pColl;
-      pInfo->aSortOrder[i] = pItem->sortOrder;
+      pInfo->aColl[i-iStart] = pColl;
+      pInfo->aSortOrder[i-iStart] = pItem->sortOrder;
     }
   }
   return pInfo;
@@ -101101,24 +102567,31 @@ static void explainComposite(
 static void generateSortTail(
   Parse *pParse,    /* Parsing context */
   Select *p,        /* The SELECT statement */
-  Vdbe *v,          /* Generate code into this VDBE */
+  SortCtx *pSort,   /* Information on the ORDER BY clause */
   int nColumn,      /* Number of columns of data */
   SelectDest *pDest /* Write the sorted results here */
 ){
+  Vdbe *v = pParse->pVdbe;                     /* The prepared statement */
   int addrBreak = sqlite3VdbeMakeLabel(v);     /* Jump here to exit loop */
   int addrContinue = sqlite3VdbeMakeLabel(v);  /* Jump here for next cycle */
   int addr;
+  int addrOnce = 0;
   int iTab;
   int pseudoTab = 0;
-  ExprList *pOrderBy = p->pOrderBy;
-
+  ExprList *pOrderBy = pSort->pOrderBy;
   int eDest = pDest->eDest;
   int iParm = pDest->iSDParm;
-
   int regRow;
   int regRowid;
+  int nKey;
 
-  iTab = pOrderBy->iECursor;
+  if( pSort->labelBkOut ){
+    sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut);
+    sqlite3VdbeAddOp2(v, OP_Goto, 0, addrBreak);
+    sqlite3VdbeResolveLabel(v, pSort->labelBkOut);
+    addrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+  }
+  iTab = pSort->iECursor;
   regRow = sqlite3GetTempReg(pParse);
   if( eDest==SRT_Output || eDest==SRT_Coroutine ){
     pseudoTab = pParse->nTab++;
@@ -101127,20 +102600,23 @@ static void generateSortTail(
   }else{
     regRowid = sqlite3GetTempReg(pParse);
   }
-  if( p->selFlags & SF_UseSorter ){
+  nKey = pOrderBy->nExpr - pSort->nOBSat;
+  if( pSort->sortFlags & SORTFLAG_UseSorter ){
     int regSortOut = ++pParse->nMem;
     int ptab2 = pParse->nTab++;
-    sqlite3VdbeAddOp3(v, OP_OpenPseudo, ptab2, regSortOut, pOrderBy->nExpr+2);
+    sqlite3VdbeAddOp3(v, OP_OpenPseudo, ptab2, regSortOut, nKey+2);
+    if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
     addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak);
     VdbeCoverage(v);
     codeOffset(v, p->iOffset, addrContinue);
     sqlite3VdbeAddOp2(v, OP_SorterData, iTab, regSortOut);
-    sqlite3VdbeAddOp3(v, OP_Column, ptab2, pOrderBy->nExpr+1, regRow);
+    sqlite3VdbeAddOp3(v, OP_Column, ptab2, nKey+1, regRow);
     sqlite3VdbeChangeP5(v, OPFLAG_CLEARCACHE);
   }else{
+    if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
     addr = 1 + sqlite3VdbeAddOp2(v, OP_Sort, iTab, addrBreak); VdbeCoverage(v);
     codeOffset(v, p->iOffset, addrContinue);
-    sqlite3VdbeAddOp3(v, OP_Column, iTab, pOrderBy->nExpr+1, regRow);
+    sqlite3VdbeAddOp3(v, OP_Column, iTab, nKey+1, regRow);
   }
   switch( eDest ){
     case SRT_Table:
@@ -101195,15 +102671,13 @@ static void generateSortTail(
   /* The bottom of the loop
   */
   sqlite3VdbeResolveLabel(v, addrContinue);
-  if( p->selFlags & SF_UseSorter ){
+  if( pSort->sortFlags & SORTFLAG_UseSorter ){
     sqlite3VdbeAddOp2(v, OP_SorterNext, iTab, addr); VdbeCoverage(v);
   }else{
     sqlite3VdbeAddOp2(v, OP_Next, iTab, addr); VdbeCoverage(v);
   }
+  if( pSort->regReturn ) sqlite3VdbeAddOp1(v, OP_Return, pSort->regReturn);
   sqlite3VdbeResolveLabel(v, addrBreak);
-  if( eDest==SRT_Output || eDest==SRT_Coroutine ){
-    sqlite3VdbeAddOp2(v, OP_Close, pseudoTab, 0);
-  }
 }
 
 /*
@@ -101663,7 +103137,7 @@ SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse *pParse, Select *pSelect){
   assert( db->lookaside.bEnabled==0 );
   pTab->nRef = 1;
   pTab->zName = 0;
-  pTab->nRowEst = 1048576;
+  pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
   selectColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol);
   selectAddColumnTypeAndCollation(pParse, pTab, pSelect);
   pTab->iPKey = -1;
@@ -101881,7 +103355,7 @@ static void generateWithRecursiveQuery(
   int regCurrent;               /* Register holding Current table */
   int iQueue;                   /* The Queue table */
   int iDistinct = 0;            /* To ensure unique results if UNION */
-  int eDest = SRT_Table;        /* How to write to Queue */
+  int eDest = SRT_Fifo;         /* How to write to Queue */
   SelectDest destQueue;         /* SelectDest targetting the Queue table */
   int i;                        /* Loop counter */
   int rc;                       /* Result code */
@@ -101913,13 +103387,13 @@ static void generateWithRecursiveQuery(
 
   /* Allocate cursors numbers for Queue and Distinct.  The cursor number for
   ** the Distinct table must be exactly one greater than Queue in order
-  ** for the SRT_DistTable and SRT_DistQueue destinations to work. */
+  ** for the SRT_DistFifo and SRT_DistQueue destinations to work. */
   iQueue = pParse->nTab++;
   if( p->op==TK_UNION ){
-    eDest = pOrderBy ? SRT_DistQueue : SRT_DistTable;
+    eDest = pOrderBy ? SRT_DistQueue : SRT_DistFifo;
     iDistinct = pParse->nTab++;
   }else{
-    eDest = pOrderBy ? SRT_Queue : SRT_Table;
+    eDest = pOrderBy ? SRT_Queue : SRT_Fifo;
   }
   sqlite3SelectDestInit(&destQueue, eDest, iQueue);
 
@@ -101985,6 +103459,7 @@ static void generateWithRecursiveQuery(
   sqlite3VdbeResolveLabel(v, addrBreak);
 
 end_of_recursive_query:
+  sqlite3ExprListDelete(pParse->db, p->pOrderBy);
   p->pOrderBy = pOrderBy;
   p->pLimit = pLimit;
   p->pOffset = pOffset;
@@ -103801,7 +105276,7 @@ static int withExpand(
     pTab->nRef = 1;
     pTab->zName = sqlite3DbStrDup(db, pCte->zName);
     pTab->iPKey = -1;
-    pTab->nRowEst = 1048576;
+    pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
     pTab->tabFlags |= TF_Ephemeral;
     pFrom->pSelect = sqlite3SelectDup(db, pCte->pSelect, 0);
     if( db->mallocFailed ) return SQLITE_NOMEM;
@@ -103977,7 +105452,7 @@ static int selectExpander(Walker *pWalker, Select *p){
       while( pSel->pPrior ){ pSel = pSel->pPrior; }
       selectColumnsFromExprList(pParse, pSel->pEList, &pTab->nCol, &pTab->aCol);
       pTab->iPKey = -1;
-      pTab->nRowEst = 1048576;
+      pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
       pTab->tabFlags |= TF_Ephemeral;
 #endif
     }else{
@@ -104356,7 +105831,7 @@ static void resetAccumulator(Parse *pParse, AggInfo *pAggInfo){
            "argument");
         pFunc->iDistinct = -1;
       }else{
-        KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0);
+        KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0, 0);
         sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0,
                           (char*)pKeyInfo, P4_KEYINFO);
       }
@@ -104472,10 +105947,11 @@ static void explainSimpleCount(
   Index *pIdx                     /* Index used to optimize scan, or NULL */
 ){
   if( pParse->explain==2 ){
+    int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx)));
     char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s%s%s",
-        pTab->zName, 
-        pIdx ? " USING COVERING INDEX " : "",
-        pIdx ? pIdx->zName : ""
+        pTab->zName,
+        bCover ? " USING COVERING INDEX " : "",
+        bCover ? pIdx->zName : ""
     );
     sqlite3VdbeAddOp4(
         pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC
@@ -104511,12 +105987,11 @@ SQLITE_PRIVATE int sqlite3Select(
   ExprList *pEList;      /* List of columns to extract. */
   SrcList *pTabList;     /* List of tables to select from */
   Expr *pWhere;          /* The WHERE clause.  May be NULL */
-  ExprList *pOrderBy;    /* The ORDER BY clause.  May be NULL */
   ExprList *pGroupBy;    /* The GROUP BY clause.  May be NULL */
   Expr *pHaving;         /* The HAVING clause.  May be NULL */
   int rc = 1;            /* Value to return from this function */
-  int addrSortIndex;     /* Address of an OP_OpenEphemeral instruction */
   DistinctCtx sDistinct; /* Info on how to code the DISTINCT keyword */
+  SortCtx sSort;         /* Info on how to code the ORDER BY clause */
   AggInfo sAggInfo;      /* Information used by aggregate queries */
   int iEnd;              /* Address of the end of the query */
   sqlite3 *db;           /* The database connection */
@@ -104533,9 +106008,15 @@ SQLITE_PRIVATE int sqlite3Select(
   if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1;
   memset(&sAggInfo, 0, sizeof(sAggInfo));
 
+  assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistFifo );
+  assert( p->pOrderBy==0 || pDest->eDest!=SRT_Fifo );
+  assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistQueue );
+  assert( p->pOrderBy==0 || pDest->eDest!=SRT_Queue );
   if( IgnorableOrderby(pDest) ){
     assert(pDest->eDest==SRT_Exists || pDest->eDest==SRT_Union || 
-           pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard);
+           pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard ||
+           pDest->eDest==SRT_Queue  || pDest->eDest==SRT_DistFifo ||
+           pDest->eDest==SRT_DistQueue || pDest->eDest==SRT_Fifo);
     /* If ORDER BY makes no difference in the output then neither does
     ** DISTINCT so it can be removed too. */
     sqlite3ExprListDelete(db, p->pOrderBy);
@@ -104543,7 +106024,8 @@ SQLITE_PRIVATE int sqlite3Select(
     p->selFlags &= ~SF_Distinct;
   }
   sqlite3SelectPrep(pParse, p, 0);
-  pOrderBy = p->pOrderBy;
+  memset(&sSort, 0, sizeof(sSort));
+  sSort.pOrderBy = p->pOrderBy;
   pTabList = p->pSrc;
   pEList = p->pEList;
   if( pParse->nErr || db->mallocFailed ){
@@ -104621,7 +106103,7 @@ SQLITE_PRIVATE int sqlite3Select(
       sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn);
       explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
       sqlite3Select(pParse, pSub, &dest);
-      pItem->pTab->nRowEst = (unsigned)pSub->nSelectRow;
+      pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow);
       pItem->viaCoroutine = 1;
       pItem->regResult = dest.iSdst;
       sqlite3VdbeAddOp1(v, OP_EndCoroutine, pItem->regReturn);
@@ -104652,7 +106134,7 @@ SQLITE_PRIVATE int sqlite3Select(
       sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor);
       explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
       sqlite3Select(pParse, pSub, &dest);
-      pItem->pTab->nRowEst = (unsigned)pSub->nSelectRow;
+      pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow);
       if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr);
       retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn);
       VdbeComment((v, "end %s", pItem->pTab->zName));
@@ -104665,7 +106147,7 @@ SQLITE_PRIVATE int sqlite3Select(
     pParse->nHeight -= sqlite3SelectExprHeight(p);
     pTabList = p->pSrc;
     if( !IgnorableOrderby(pDest) ){
-      pOrderBy = p->pOrderBy;
+      sSort.pOrderBy = p->pOrderBy;
     }
   }
   pEList = p->pEList;
@@ -104685,18 +106167,6 @@ SQLITE_PRIVATE int sqlite3Select(
   }
 #endif
 
-  /* If there is both a GROUP BY and an ORDER BY clause and they are
-  ** identical, then disable the ORDER BY clause since the GROUP BY
-  ** will cause elements to come out in the correct order.  This is
-  ** an optimization - the correct answer should result regardless.
-  ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER
-  ** to disable this optimization for testing purposes.
-  */
-  if( sqlite3ExprListCompare(p->pGroupBy, pOrderBy, -1)==0
-         && OptimizationEnabled(db, SQLITE_GroupByOrder) ){
-    pOrderBy = 0;
-  }
-
   /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and 
   ** if the select-list is the same as the ORDER BY list, then this query
   ** can be rewritten as a GROUP BY. In other words, this:
@@ -104713,12 +106183,12 @@ SQLITE_PRIVATE int sqlite3Select(
   ** BY and DISTINCT, and an index or separate temp-table for the other.
   */
   if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct 
-   && sqlite3ExprListCompare(pOrderBy, p->pEList, -1)==0
+   && sqlite3ExprListCompare(sSort.pOrderBy, p->pEList, -1)==0
   ){
     p->selFlags &= ~SF_Distinct;
     p->pGroupBy = sqlite3ExprListDup(db, p->pEList, 0);
     pGroupBy = p->pGroupBy;
-    pOrderBy = 0;
+    sSort.pOrderBy = 0;
     /* Notice that even thought SF_Distinct has been cleared from p->selFlags,
     ** the sDistinct.isTnct is still set.  Hence, isTnct represents the
     ** original setting of the SF_Distinct flag, not the current setting */
@@ -104732,16 +106202,16 @@ SQLITE_PRIVATE int sqlite3Select(
   ** we figure out that the sorting index is not needed.  The addrSortIndex
   ** variable is used to facilitate that change.
   */
-  if( pOrderBy ){
+  if( sSort.pOrderBy ){
     KeyInfo *pKeyInfo;
-    pKeyInfo = keyInfoFromExprList(pParse, pOrderBy, 0);
-    pOrderBy->iECursor = pParse->nTab++;
-    p->addrOpenEphm[2] = addrSortIndex =
+    pKeyInfo = keyInfoFromExprList(pParse, sSort.pOrderBy, 0, 0);
+    sSort.iECursor = pParse->nTab++;
+    sSort.addrSortIndex =
       sqlite3VdbeAddOp4(v, OP_OpenEphemeral,
-                           pOrderBy->iECursor, pOrderBy->nExpr+2, 0,
+                           sSort.iECursor, sSort.pOrderBy->nExpr+2, 0,
                            (char*)pKeyInfo, P4_KEYINFO);
   }else{
-    addrSortIndex = -1;
+    sSort.addrSortIndex = -1;
   }
 
   /* If the output is destined for a temporary table, open that table.
@@ -104755,9 +106225,9 @@ SQLITE_PRIVATE int sqlite3Select(
   iEnd = sqlite3VdbeMakeLabel(v);
   p->nSelectRow = LARGEST_INT64;
   computeLimitRegisters(pParse, p, iEnd);
-  if( p->iLimit==0 && addrSortIndex>=0 ){
-    sqlite3VdbeGetOp(v, addrSortIndex)->opcode = OP_SorterOpen;
-    p->selFlags |= SF_UseSorter;
+  if( p->iLimit==0 && sSort.addrSortIndex>=0 ){
+    sqlite3VdbeGetOp(v, sSort.addrSortIndex)->opcode = OP_SorterOpen;
+    sSort.sortFlags |= SORTFLAG_UseSorter;
   }
 
   /* Open a virtual index to use for the distinct set.
@@ -104766,7 +106236,7 @@ SQLITE_PRIVATE int sqlite3Select(
     sDistinct.tabTnct = pParse->nTab++;
     sDistinct.addrTnct = sqlite3VdbeAddOp4(v, OP_OpenEphemeral,
                                 sDistinct.tabTnct, 0, 0,
-                                (char*)keyInfoFromExprList(pParse, p->pEList, 0),
+                                (char*)keyInfoFromExprList(pParse, p->pEList,0,0),
                                 P4_KEYINFO);
     sqlite3VdbeChangeP5(v, BTREE_UNORDERED);
     sDistinct.eTnctType = WHERE_DISTINCT_UNORDERED;
@@ -104779,8 +106249,8 @@ SQLITE_PRIVATE int sqlite3Select(
     u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0);
 
     /* Begin the database scan. */
-    pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pOrderBy, p->pEList,
-                               wctrlFlags, 0);
+    pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy,
+                               p->pEList, wctrlFlags, 0);
     if( pWInfo==0 ) goto select_end;
     if( sqlite3WhereOutputRowCount(pWInfo) < p->nSelectRow ){
       p->nSelectRow = sqlite3WhereOutputRowCount(pWInfo);
@@ -104788,19 +106258,23 @@ SQLITE_PRIVATE int sqlite3Select(
     if( sDistinct.isTnct && sqlite3WhereIsDistinct(pWInfo) ){
       sDistinct.eTnctType = sqlite3WhereIsDistinct(pWInfo);
     }
-    if( pOrderBy && sqlite3WhereIsOrdered(pWInfo) ) pOrderBy = 0;
+    if( sSort.pOrderBy ){
+      sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo);
+      if( sSort.nOBSat==sSort.pOrderBy->nExpr ){
+        sSort.pOrderBy = 0;
+      }
+    }
 
     /* If sorting index that was created by a prior OP_OpenEphemeral 
     ** instruction ended up not being needed, then change the OP_OpenEphemeral
     ** into an OP_Noop.
     */
-    if( addrSortIndex>=0 && pOrderBy==0 ){
-      sqlite3VdbeChangeToNoop(v, addrSortIndex);
-      p->addrOpenEphm[2] = -1;
+    if( sSort.addrSortIndex>=0 && sSort.pOrderBy==0 ){
+      sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex);
     }
 
     /* Use the standard inner loop. */
-    selectInnerLoop(pParse, p, pEList, -1, pOrderBy, &sDistinct, pDest,
+    selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest,
                     sqlite3WhereContinueLabel(pWInfo),
                     sqlite3WhereBreakLabel(pWInfo));
 
@@ -104821,6 +106295,7 @@ SQLITE_PRIVATE int sqlite3Select(
     int addrEnd;        /* End of processing for this SELECT */
     int sortPTab = 0;   /* Pseudotable used to decode sorting results */
     int sortOut = 0;    /* Output register from the sorter */
+    int orderByGrp = 0; /* True if the GROUP BY and ORDER BY are the same */
 
     /* Remove any and all aliases between the result set and the
     ** GROUP BY clause.
@@ -104840,6 +106315,18 @@ SQLITE_PRIVATE int sqlite3Select(
       p->nSelectRow = 1;
     }
 
+
+    /* If there is both a GROUP BY and an ORDER BY clause and they are
+    ** identical, then it may be possible to disable the ORDER BY clause 
+    ** on the grounds that the GROUP BY will cause elements to come out 
+    ** in the correct order. It also may not - the GROUP BY may use a
+    ** database index that causes rows to be grouped together as required
+    ** but not actually sorted. Either way, record the fact that the
+    ** ORDER BY and GROUP BY clauses are the same by setting the orderByGrp
+    ** variable.  */
+    if( sqlite3ExprListCompare(pGroupBy, sSort.pOrderBy, -1)==0 ){
+      orderByGrp = 1;
+    }
  
     /* Create a label to jump to when we want to abort the query */
     addrEnd = sqlite3VdbeMakeLabel(v);
@@ -104856,7 +106343,7 @@ SQLITE_PRIVATE int sqlite3Select(
     sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr+1 : 0;
     sAggInfo.pGroupBy = pGroupBy;
     sqlite3ExprAnalyzeAggList(&sNC, pEList);
-    sqlite3ExprAnalyzeAggList(&sNC, pOrderBy);
+    sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy);
     if( pHaving ){
       sqlite3ExprAnalyzeAggregates(&sNC, pHaving);
     }
@@ -104890,7 +106377,7 @@ SQLITE_PRIVATE int sqlite3Select(
       ** will be converted into a Noop.  
       */
       sAggInfo.sortingIdx = pParse->nTab++;
-      pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0);
+      pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0, 0);
       addrSortingIdx = sqlite3VdbeAddOp4(v, OP_SorterOpen, 
           sAggInfo.sortingIdx, sAggInfo.nSortingColumn, 
           0, (char*)pKeyInfo, P4_KEYINFO);
@@ -104919,10 +106406,11 @@ SQLITE_PRIVATE int sqlite3Select(
       ** in the right order to begin with.
       */
       sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset);
-      pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, 
-                                 WHERE_GROUPBY, 0);
+      pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0,
+          WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0
+      );
       if( pWInfo==0 ) goto select_end;
-      if( sqlite3WhereIsOrdered(pWInfo) ){
+      if( sqlite3WhereIsOrdered(pWInfo)==pGroupBy->nExpr ){
         /* The optimizer is able to deliver rows in group by order so
         ** we do not have to sort.  The OP_OpenEphemeral table will be
         ** cancelled later because we still need to use the pKeyInfo
@@ -104985,6 +106473,21 @@ SQLITE_PRIVATE int sqlite3Select(
         VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v);
         sAggInfo.useSortingIdx = 1;
         sqlite3ExprCacheClear(pParse);
+
+      }
+
+      /* If the index or temporary table used by the GROUP BY sort
+      ** will naturally deliver rows in the order required by the ORDER BY
+      ** clause, cancel the ephemeral table open coded earlier.
+      **
+      ** This is an optimization - the correct answer should result regardless.
+      ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER to 
+      ** disable this optimization for testing purposes.  */
+      if( orderByGrp && OptimizationEnabled(db, SQLITE_GroupByOrder) 
+       && (groupBySort || sqlite3WhereIsSorted(pWInfo))
+      ){
+        sSort.pOrderBy = 0;
+        sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex);
       }
 
       /* Evaluate the current GROUP BY terms and store in b0, b1, b2...
@@ -105073,7 +106576,7 @@ SQLITE_PRIVATE int sqlite3Select(
       sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
       finalizeAggFunctions(pParse, &sAggInfo);
       sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL);
-      selectInnerLoop(pParse, p, p->pEList, -1, pOrderBy,
+      selectInnerLoop(pParse, p, p->pEList, -1, &sSort,
                       &sDistinct, pDest,
                       addrOutputRow+1, addrSetAbort);
       sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
@@ -105205,7 +106708,7 @@ SQLITE_PRIVATE int sqlite3Select(
         }
         updateAccumulator(pParse, &sAggInfo);
         assert( pMinMax==0 || pMinMax->nExpr==1 );
-        if( sqlite3WhereIsOrdered(pWInfo) ){
+        if( sqlite3WhereIsOrdered(pWInfo)>0 ){
           sqlite3VdbeAddOp2(v, OP_Goto, 0, sqlite3WhereBreakLabel(pWInfo));
           VdbeComment((v, "%s() by index",
                 (flag==WHERE_ORDERBY_MIN?"min":"max")));
@@ -105214,7 +106717,7 @@ SQLITE_PRIVATE int sqlite3Select(
         finalizeAggFunctions(pParse, &sAggInfo);
       }
 
-      pOrderBy = 0;
+      sSort.pOrderBy = 0;
       sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL);
       selectInnerLoop(pParse, p, p->pEList, -1, 0, 0, 
                       pDest, addrEnd, addrEnd);
@@ -105231,9 +106734,9 @@ SQLITE_PRIVATE int sqlite3Select(
   /* If there is an ORDER BY clause, then we need to sort the results
   ** and send them to the callback one by one.
   */
-  if( pOrderBy ){
-    explainTempTable(pParse, "ORDER BY");
-    generateSortTail(pParse, p, v, pEList->nExpr, pDest);
+  if( sSort.pOrderBy ){
+    explainTempTable(pParse, sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY");
+    generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest);
   }
 
   /* Jump here to skip this query
@@ -106872,7 +108375,7 @@ SQLITE_PRIVATE void sqlite3Update(
   iIdxCur = iDataCur+1;
   pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab);
   for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){
-    if( pIdx->autoIndex==2 && pPk!=0 ){
+    if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){
       iDataCur = pParse->nTab;
       pTabList->a[0].iCursor = iDataCur;
     }
@@ -107123,7 +108626,8 @@ SQLITE_PRIVATE void sqlite3Update(
     }
     labelContinue = labelBreak;
     sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak);
-    VdbeCoverage(v);
+    VdbeCoverageIf(v, pPk==0);
+    VdbeCoverageIf(v, pPk!=0);
   }else if( pPk ){
     labelContinue = sqlite3VdbeMakeLabel(v);
     sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v);
@@ -109071,7 +110575,7 @@ struct WhereLoop {
     struct {               /* Information for virtual tables */
       int idxNum;            /* Index number */
       u8 needFree;           /* True if sqlite3_free(idxStr) is needed */
-      u8 isOrdered;          /* True if satisfies ORDER BY */
+      i8 isOrdered;          /* True if satisfies ORDER BY */
       u16 omitMask;          /* Terms that may be omitted */
       char *idxStr;          /* Index identifier string */
     } vtab;
@@ -109133,8 +110637,8 @@ struct WherePath {
   Bitmask revLoop;      /* aLoop[]s that should be reversed for ORDER BY */
   LogEst nRow;          /* Estimated number of rows generated by this path */
   LogEst rCost;         /* Total cost of this path */
-  u8 isOrdered;         /* True if this path satisfies ORDER BY */
-  u8 isOrderedValid;    /* True if the isOrdered field is valid */
+  LogEst rUnsorted;     /* Total cost of this path ignoring sorting costs */
+  i8 isOrdered;         /* No. of ORDER BY terms satisfied. -1 for unknown */
   WhereLoop **aLoop;    /* Array of WhereLoop objects implementing this path */
 };
 
@@ -109348,7 +110852,8 @@ struct WhereInfo {
   Bitmask revMask;          /* Mask of ORDER BY terms that need reversing */
   LogEst nRowOut;           /* Estimated number of output rows */
   u16 wctrlFlags;           /* Flags originally passed to sqlite3WhereBegin() */
-  u8 bOBSat;                /* ORDER BY satisfied by indices */
+  i8 nOBSat;                /* Number of ORDER BY terms satisfied by indices */
+  u8 sorted;                /* True if really sorted (not just grouped) */
   u8 okOnePass;             /* Ok to use one-pass algorithm for UPDATE/DELETE */
   u8 untestedTerms;         /* Not all WHERE terms resolved by outer loop */
   u8 eDistinct;             /* One of the WHERE_DISTINCT_* values below */
@@ -109432,7 +110937,7 @@ SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo *pWInfo){
 ** Return FALSE if the output needs to be sorted.
 */
 SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo *pWInfo){
-  return pWInfo->bOBSat!=0;
+  return pWInfo->nOBSat;
 }
 
 /*
@@ -109440,6 +110945,7 @@ SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo *pWInfo){
 ** immediately with the next row of a WHERE clause.
 */
 SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo *pWInfo){
+  assert( pWInfo->iContinue!=0 );
   return pWInfo->iContinue;
 }
 
@@ -109619,7 +111125,7 @@ static int whereClauseInsert(WhereClause *pWC, Expr *p, u8 wtFlags){
   if( p && ExprHasProperty(p, EP_Unlikely) ){
     pTerm->truthProb = sqlite3LogEst(p->iTable) - 99;
   }else{
-    pTerm->truthProb = -1;
+    pTerm->truthProb = 1;
   }
   pTerm->pExpr = sqlite3ExprSkipCollate(p);
   pTerm->wtFlags = wtFlags;
@@ -109936,7 +111442,7 @@ static WhereTerm *whereScanInit(
   if( pIdx && iColumn>=0 ){
     pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity;
     for(j=0; pIdx->aiColumn[j]!=iColumn; j++){
-      if( NEVER(j>=pIdx->nKeyCol) ) return 0;
+      if( NEVER(j>pIdx->nColumn) ) return 0;
     }
     pScan->zCollName = pIdx->azColl[j];
   }else{
@@ -110862,7 +112368,7 @@ static int isDistinctRedundant(
   **      contain a "col=X" term are subject to a NOT NULL constraint.
   */
   for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
-    if( pIdx->onError==OE_None ) continue;
+    if( !IsUniqueIndex(pIdx) ) continue;
     for(i=0; i<pIdx->nKeyCol; i++){
       i16 iCol = pIdx->aiColumn[i];
       if( 0==findTerm(pWC, iBase, iCol, ~(Bitmask)0, WO_EQ, pIdx) ){
@@ -110886,8 +112392,7 @@ static int isDistinctRedundant(
 ** Estimate the logarithm of the input value to base 2.
 */
 static LogEst estLog(LogEst N){
-  LogEst x = sqlite3LogEst(N);
-  return x>33 ? x - 33 : 0;
+  return N<=10 ? 0 : sqlite3LogEst(N) - 33;
 }
 
 /*
@@ -111348,10 +112853,11 @@ static void whereKeyStats(
       iLower = 0;
       iUpper = aSample[0].anLt[iCol];
     }else{
-      iUpper = i>=pIdx->nSample ? pIdx->aiRowEst[0] : aSample[i].anLt[iCol];
+      i64 nRow0 = sqlite3LogEstToInt(pIdx->aiRowLogEst[0]);
+      iUpper = i>=pIdx->nSample ? nRow0 : aSample[i].anLt[iCol];
       iLower = aSample[i-1].anEq[iCol] + aSample[i-1].anLt[iCol];
     }
-    aStat[1] = (pIdx->nKeyCol>iCol ? pIdx->aAvgEq[iCol] : 1);
+    aStat[1] = pIdx->aAvgEq[iCol];
     if( iLower>=iUpper ){
       iGap = 0;
     }else{
@@ -111368,6 +112874,138 @@ static void whereKeyStats(
 #endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */
 
 /*
+** If it is not NULL, pTerm is a term that provides an upper or lower
+** bound on a range scan. Without considering pTerm, it is estimated 
+** that the scan will visit nNew rows. This function returns the number
+** estimated to be visited after taking pTerm into account.
+**
+** If the user explicitly specified a likelihood() value for this term,
+** then the return value is the likelihood multiplied by the number of
+** input rows. Otherwise, this function assumes that an "IS NOT NULL" term
+** has a likelihood of 0.50, and any other term a likelihood of 0.25.
+*/
+static LogEst whereRangeAdjust(WhereTerm *pTerm, LogEst nNew){
+  LogEst nRet = nNew;
+  if( pTerm ){
+    if( pTerm->truthProb<=0 ){
+      nRet += pTerm->truthProb;
+    }else if( (pTerm->wtFlags & TERM_VNULL)==0 ){
+      nRet -= 20;        assert( 20==sqlite3LogEst(4) );
+    }
+  }
+  return nRet;
+}
+
+#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
+/* 
+** This function is called to estimate the number of rows visited by a
+** range-scan on a skip-scan index. For example:
+**
+**   CREATE INDEX i1 ON t1(a, b, c);
+**   SELECT * FROM t1 WHERE a=? AND c BETWEEN ? AND ?;
+**
+** Value pLoop->nOut is currently set to the estimated number of rows 
+** visited for scanning (a=? AND b=?). This function reduces that estimate 
+** by some factor to account for the (c BETWEEN ? AND ?) expression based
+** on the stat4 data for the index. this scan will be peformed multiple 
+** times (once for each (a,b) combination that matches a=?) is dealt with 
+** by the caller.
+**
+** It does this by scanning through all stat4 samples, comparing values
+** extracted from pLower and pUpper with the corresponding column in each
+** sample. If L and U are the number of samples found to be less than or
+** equal to the values extracted from pLower and pUpper respectively, and
+** N is the total number of samples, the pLoop->nOut value is adjusted
+** as follows:
+**
+**   nOut = nOut * ( min(U - L, 1) / N )
+**
+** If pLower is NULL, or a value cannot be extracted from the term, L is
+** set to zero. If pUpper is NULL, or a value cannot be extracted from it,
+** U is set to N.
+**
+** Normally, this function sets *pbDone to 1 before returning. However,
+** if no value can be extracted from either pLower or pUpper (and so the
+** estimate of the number of rows delivered remains unchanged), *pbDone
+** is left as is.
+**
+** If an error occurs, an SQLite error code is returned. Otherwise, 
+** SQLITE_OK.
+*/
+static int whereRangeSkipScanEst(
+  Parse *pParse,       /* Parsing & code generating context */
+  WhereTerm *pLower,   /* Lower bound on the range. ex: "x>123" Might be NULL */
+  WhereTerm *pUpper,   /* Upper bound on the range. ex: "x<455" Might be NULL */
+  WhereLoop *pLoop,    /* Update the .nOut value of this loop */
+  int *pbDone          /* Set to true if at least one expr. value extracted */
+){
+  Index *p = pLoop->u.btree.pIndex;
+  int nEq = pLoop->u.btree.nEq;
+  sqlite3 *db = pParse->db;
+  int nLower = -1;
+  int nUpper = p->nSample+1;
+  int rc = SQLITE_OK;
+  int iCol = p->aiColumn[nEq];
+  u8 aff = iCol>=0 ? p->pTable->aCol[iCol].affinity : SQLITE_AFF_INTEGER;
+  CollSeq *pColl;
+  
+  sqlite3_value *p1 = 0;          /* Value extracted from pLower */
+  sqlite3_value *p2 = 0;          /* Value extracted from pUpper */
+  sqlite3_value *pVal = 0;        /* Value extracted from record */
+
+  pColl = sqlite3LocateCollSeq(pParse, p->azColl[nEq]);
+  if( pLower ){
+    rc = sqlite3Stat4ValueFromExpr(pParse, pLower->pExpr->pRight, aff, &p1);
+    nLower = 0;
+  }
+  if( pUpper && rc==SQLITE_OK ){
+    rc = sqlite3Stat4ValueFromExpr(pParse, pUpper->pExpr->pRight, aff, &p2);
+    nUpper = p2 ? 0 : p->nSample;
+  }
+
+  if( p1 || p2 ){
+    int i;
+    int nDiff;
+    for(i=0; rc==SQLITE_OK && i<p->nSample; i++){
+      rc = sqlite3Stat4Column(db, p->aSample[i].p, p->aSample[i].n, nEq, &pVal);
+      if( rc==SQLITE_OK && p1 ){
+        int res = sqlite3MemCompare(p1, pVal, pColl);
+        if( res>=0 ) nLower++;
+      }
+      if( rc==SQLITE_OK && p2 ){
+        int res = sqlite3MemCompare(p2, pVal, pColl);
+        if( res>=0 ) nUpper++;
+      }
+    }
+    nDiff = (nUpper - nLower);
+    if( nDiff<=0 ) nDiff = 1;
+
+    /* If there is both an upper and lower bound specified, and the 
+    ** comparisons indicate that they are close together, use the fallback
+    ** method (assume that the scan visits 1/64 of the rows) for estimating
+    ** the number of rows visited. Otherwise, estimate the number of rows
+    ** using the method described in the header comment for this function. */
+    if( nDiff!=1 || pUpper==0 || pLower==0 ){
+      int nAdjust = (sqlite3LogEst(p->nSample) - sqlite3LogEst(nDiff));
+      pLoop->nOut -= nAdjust;
+      *pbDone = 1;
+      WHERETRACE(0x10, ("range skip-scan regions: %u..%u  adjust=%d est=%d\n",
+                           nLower, nUpper, nAdjust*-1, pLoop->nOut));
+    }
+
+  }else{
+    assert( *pbDone==0 );
+  }
+
+  sqlite3ValueFree(p1);
+  sqlite3ValueFree(p2);
+  sqlite3ValueFree(pVal);
+
+  return rc;
+}
+#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */
+
+/*
 ** This function is used to estimate the number of rows that will be visited
 ** by scanning an index for a range of values. The range may have an upper
 ** bound, a lower bound, or both. The WHERE clause terms that set the upper
@@ -111403,9 +113041,9 @@ static void whereKeyStats(
 ** to account for the range contraints pLower and pUpper.
 ** 
 ** In the absence of sqlite_stat4 ANALYZE data, or if such data cannot be
-** used, each range inequality reduces the search space by a factor of 4. 
-** Hence a pair of constraints (x>? AND x<?) reduces the expected number of
-** rows visited by a factor of 16.
+** used, a single range inequality reduces the search space by a factor of 4. 
+** and a pair of constraints (x>? AND x<?) reduces the expected number of
+** rows visited by a factor of 64.
 */
 static int whereRangeScanEst(
   Parse *pParse,       /* Parsing & code generating context */
@@ -111423,95 +113061,100 @@ static int whereRangeScanEst(
   int nEq = pLoop->u.btree.nEq;
 
   if( p->nSample>0
-   && nEq==pBuilder->nRecValid
    && nEq<p->nSampleCol
    && OptimizationEnabled(pParse->db, SQLITE_Stat3) 
   ){
-    UnpackedRecord *pRec = pBuilder->pRec;
-    tRowcnt a[2];
-    u8 aff;
-
-    /* Variable iLower will be set to the estimate of the number of rows in 
-    ** the index that are less than the lower bound of the range query. The
-    ** lower bound being the concatenation of $P and $L, where $P is the
-    ** key-prefix formed by the nEq values matched against the nEq left-most
-    ** columns of the index, and $L is the value in pLower.
-    **
-    ** Or, if pLower is NULL or $L cannot be extracted from it (because it
-    ** is not a simple variable or literal value), the lower bound of the
-    ** range is $P. Due to a quirk in the way whereKeyStats() works, even
-    ** if $L is available, whereKeyStats() is called for both ($P) and 
-    ** ($P:$L) and the larger of the two returned values used.
-    **
-    ** Similarly, iUpper is to be set to the estimate of the number of rows
-    ** less than the upper bound of the range query. Where the upper bound
-    ** is either ($P) or ($P:$U). Again, even if $U is available, both values
-    ** of iUpper are requested of whereKeyStats() and the smaller used.
-    */
-    tRowcnt iLower;
-    tRowcnt iUpper;
+    if( nEq==pBuilder->nRecValid ){
+      UnpackedRecord *pRec = pBuilder->pRec;
+      tRowcnt a[2];
+      u8 aff;
+
+      /* Variable iLower will be set to the estimate of the number of rows in 
+      ** the index that are less than the lower bound of the range query. The
+      ** lower bound being the concatenation of $P and $L, where $P is the
+      ** key-prefix formed by the nEq values matched against the nEq left-most
+      ** columns of the index, and $L is the value in pLower.
+      **
+      ** Or, if pLower is NULL or $L cannot be extracted from it (because it
+      ** is not a simple variable or literal value), the lower bound of the
+      ** range is $P. Due to a quirk in the way whereKeyStats() works, even
+      ** if $L is available, whereKeyStats() is called for both ($P) and 
+      ** ($P:$L) and the larger of the two returned values used.
+      **
+      ** Similarly, iUpper is to be set to the estimate of the number of rows
+      ** less than the upper bound of the range query. Where the upper bound
+      ** is either ($P) or ($P:$U). Again, even if $U is available, both values
+      ** of iUpper are requested of whereKeyStats() and the smaller used.
+      */
+      tRowcnt iLower;
+      tRowcnt iUpper;
 
-    if( nEq==p->nKeyCol ){
-      aff = SQLITE_AFF_INTEGER;
-    }else{
-      aff = p->pTable->aCol[p->aiColumn[nEq]].affinity;
-    }
-    /* Determine iLower and iUpper using ($P) only. */
-    if( nEq==0 ){
-      iLower = 0;
-      iUpper = p->aiRowEst[0];
-    }else{
-      /* Note: this call could be optimized away - since the same values must 
-      ** have been requested when testing key $P in whereEqualScanEst().  */
-      whereKeyStats(pParse, p, pRec, 0, a);
-      iLower = a[0];
-      iUpper = a[0] + a[1];
-    }
-
-    /* If possible, improve on the iLower estimate using ($P:$L). */
-    if( pLower ){
-      int bOk;                    /* True if value is extracted from pExpr */
-      Expr *pExpr = pLower->pExpr->pRight;
-      assert( (pLower->eOperator & (WO_GT|WO_GE))!=0 );
-      rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
-      if( rc==SQLITE_OK && bOk ){
-        tRowcnt iNew;
+      if( nEq==p->nKeyCol ){
+        aff = SQLITE_AFF_INTEGER;
+      }else{
+        aff = p->pTable->aCol[p->aiColumn[nEq]].affinity;
+      }
+      /* Determine iLower and iUpper using ($P) only. */
+      if( nEq==0 ){
+        iLower = 0;
+        iUpper = sqlite3LogEstToInt(p->aiRowLogEst[0]);
+      }else{
+        /* Note: this call could be optimized away - since the same values must 
+        ** have been requested when testing key $P in whereEqualScanEst().  */
         whereKeyStats(pParse, p, pRec, 0, a);
-        iNew = a[0] + ((pLower->eOperator & WO_GT) ? a[1] : 0);
-        if( iNew>iLower ) iLower = iNew;
-        nOut--;
+        iLower = a[0];
+        iUpper = a[0] + a[1];
       }
-    }
 
-    /* If possible, improve on the iUpper estimate using ($P:$U). */
-    if( pUpper ){
-      int bOk;                    /* True if value is extracted from pExpr */
-      Expr *pExpr = pUpper->pExpr->pRight;
-      assert( (pUpper->eOperator & (WO_LT|WO_LE))!=0 );
-      rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
-      if( rc==SQLITE_OK && bOk ){
-        tRowcnt iNew;
-        whereKeyStats(pParse, p, pRec, 1, a);
-        iNew = a[0] + ((pUpper->eOperator & WO_LE) ? a[1] : 0);
-        if( iNew<iUpper ) iUpper = iNew;
-        nOut--;
+      /* If possible, improve on the iLower estimate using ($P:$L). */
+      if( pLower ){
+        int bOk;                    /* True if value is extracted from pExpr */
+        Expr *pExpr = pLower->pExpr->pRight;
+        assert( (pLower->eOperator & (WO_GT|WO_GE))!=0 );
+        rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
+        if( rc==SQLITE_OK && bOk ){
+          tRowcnt iNew;
+          whereKeyStats(pParse, p, pRec, 0, a);
+          iNew = a[0] + ((pLower->eOperator & WO_GT) ? a[1] : 0);
+          if( iNew>iLower ) iLower = iNew;
+          nOut--;
+        }
       }
-    }
 
-    pBuilder->pRec = pRec;
-    if( rc==SQLITE_OK ){
-      if( iUpper>iLower ){
-        nNew = sqlite3LogEst(iUpper - iLower);
-      }else{
-        nNew = 10;        assert( 10==sqlite3LogEst(2) );
+      /* If possible, improve on the iUpper estimate using ($P:$U). */
+      if( pUpper ){
+        int bOk;                    /* True if value is extracted from pExpr */
+        Expr *pExpr = pUpper->pExpr->pRight;
+        assert( (pUpper->eOperator & (WO_LT|WO_LE))!=0 );
+        rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
+        if( rc==SQLITE_OK && bOk ){
+          tRowcnt iNew;
+          whereKeyStats(pParse, p, pRec, 1, a);
+          iNew = a[0] + ((pUpper->eOperator & WO_LE) ? a[1] : 0);
+          if( iNew<iUpper ) iUpper = iNew;
+          nOut--;
+        }
       }
-      if( nNew<nOut ){
-        nOut = nNew;
+
+      pBuilder->pRec = pRec;
+      if( rc==SQLITE_OK ){
+        if( iUpper>iLower ){
+          nNew = sqlite3LogEst(iUpper - iLower);
+        }else{
+          nNew = 10;        assert( 10==sqlite3LogEst(2) );
+        }
+        if( nNew<nOut ){
+          nOut = nNew;
+        }
+        pLoop->nOut = (LogEst)nOut;
+        WHERETRACE(0x10, ("range scan regions: %u..%u  est=%d\n",
+                           (u32)iLower, (u32)iUpper, nOut));
+        return SQLITE_OK;
       }
-      pLoop->nOut = (LogEst)nOut;
-      WHERETRACE(0x10, ("range scan regions: %u..%u  est=%d\n",
-                         (u32)iLower, (u32)iUpper, nOut));
-      return SQLITE_OK;
+    }else{
+      int bDone = 0;
+      rc = whereRangeSkipScanEst(pParse, pLower, pUpper, pLoop, &bDone);
+      if( bDone ) return rc;
     }
   }
 #else
@@ -111519,17 +113162,18 @@ static int whereRangeScanEst(
   UNUSED_PARAMETER(pBuilder);
 #endif
   assert( pLower || pUpper );
-  /* TUNING:  Each inequality constraint reduces the search space 4-fold.
-  ** A BETWEEN operator, therefore, reduces the search space 16-fold */
-  nNew = nOut;
-  if( pLower && (pLower->wtFlags & TERM_VNULL)==0 ){
-    nNew -= 20;        assert( 20==sqlite3LogEst(4) );
-    nOut--;
-  }
-  if( pUpper ){
-    nNew -= 20;        assert( 20==sqlite3LogEst(4) );
-    nOut--;
-  }
+  assert( pUpper==0 || (pUpper->wtFlags & TERM_VNULL)==0 );
+  nNew = whereRangeAdjust(pLower, nOut);
+  nNew = whereRangeAdjust(pUpper, nNew);
+
+  /* TUNING: If there is both an upper and lower limit, assume the range is
+  ** reduced by an additional 75%. This means that, by default, an open-ended
+  ** range query (e.g. col > ?) is assumed to match 1/4 of the rows in the
+  ** index. While a closed range (e.g. col BETWEEN ? AND ?) is estimated to
+  ** match 1/64 of the index. */ 
+  if( pLower && pUpper ) nNew -= 20;
+
+  nOut -= (pLower!=0) + (pUpper!=0);
   if( nNew<10 ) nNew = 10;
   if( nNew<nOut ) nOut = nNew;
   pLoop->nOut = (LogEst)nOut;
@@ -111569,7 +113213,7 @@ static int whereEqualScanEst(
   int bOk;
 
   assert( nEq>=1 );
-  assert( nEq<=(p->nKeyCol+1) );
+  assert( nEq<=p->nColumn );
   assert( p->aSample!=0 );
   assert( p->nSample>0 );
   assert( pBuilder->nRecValid<nEq );
@@ -111582,7 +113226,7 @@ static int whereEqualScanEst(
 
   /* This is an optimization only. The call to sqlite3Stat4ProbeSetValue()
   ** below would return the same value.  */
-  if( nEq>p->nKeyCol ){
+  if( nEq>=p->nColumn ){
     *pnRow = 1;
     return SQLITE_OK;
   }
@@ -111626,6 +113270,7 @@ static int whereInScanEst(
   tRowcnt *pnRow       /* Write the revised row estimate here */
 ){
   Index *p = pBuilder->pNew->u.btree.pIndex;
+  i64 nRow0 = sqlite3LogEstToInt(p->aiRowLogEst[0]);
   int nRecValid = pBuilder->nRecValid;
   int rc = SQLITE_OK;     /* Subfunction return code */
   tRowcnt nEst;           /* Number of rows for a single term */
@@ -111634,14 +113279,14 @@ static int whereInScanEst(
 
   assert( p->aSample!=0 );
   for(i=0; rc==SQLITE_OK && i<pList->nExpr; i++){
-    nEst = p->aiRowEst[0];
+    nEst = nRow0;
     rc = whereEqualScanEst(pParse, pBuilder, pList->a[i].pExpr, &nEst);
     nRowEst += nEst;
     pBuilder->nRecValid = nRecValid;
   }
 
   if( rc==SQLITE_OK ){
-    if( nRowEst > p->aiRowEst[0] ) nRowEst = p->aiRowEst[0];
+    if( nRowEst > nRow0 ) nRowEst = nRow0;
     *pnRow = nRowEst;
     WHERETRACE(0x10,("IN row estimate: est=%g\n", nRowEst));
   }
@@ -111775,7 +113420,7 @@ static int codeEqualityTerm(
     }
     assert( pX->op==TK_IN );
     iReg = iTarget;
-    eType = sqlite3FindInIndex(pParse, pX, 0);
+    eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0);
     if( eType==IN_INDEX_INDEX_DESC ){
       testcase( bRev );
       bRev = !bRev;
@@ -112012,7 +113657,7 @@ static char *explainIndexRange(sqlite3 *db, WhereLoop *pLoop, Table *pTab){
   txt.db = db;
   sqlite3StrAccumAppend(&txt, " (", 2);
   for(i=0; i<nEq; i++){
-    char *z = (i==pIndex->nKeyCol ) ? "rowid" : aCol[aiColumn[i]].zName;
+    char *z = aiColumn[i] < 0 ? "rowid" : aCol[aiColumn[i]].zName;
     if( i>=nSkip ){
       explainAppendTerm(&txt, i, z, "=");
     }else{
@@ -112025,11 +113670,11 @@ static char *explainIndexRange(sqlite3 *db, WhereLoop *pLoop, Table *pTab){
 
   j = i;
   if( pLoop->wsFlags&WHERE_BTM_LIMIT ){
-    char *z = (j==pIndex->nKeyCol ) ? "rowid" : aCol[aiColumn[j]].zName;
+    char *z = aiColumn[j] < 0 ? "rowid" : aCol[aiColumn[j]].zName;
     explainAppendTerm(&txt, i++, z, ">");
   }
   if( pLoop->wsFlags&WHERE_TOP_LIMIT ){
-    char *z = (j==pIndex->nKeyCol ) ? "rowid" : aCol[aiColumn[j]].zName;
+    char *z = aiColumn[j] < 0 ? "rowid" : aCol[aiColumn[j]].zName;
     explainAppendTerm(&txt, i, z, "<");
   }
   sqlite3StrAccumAppend(&txt, ")", 1);
@@ -112084,13 +113729,20 @@ static void explainOneScan(
     if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0
      && ALWAYS(pLoop->u.btree.pIndex!=0)
     ){
+      const char *zFmt;
+      Index *pIdx = pLoop->u.btree.pIndex;
       char *zWhere = explainIndexRange(db, pLoop, pItem->pTab);
-      zMsg = sqlite3MAppendf(db, zMsg,
-               ((flags & WHERE_AUTO_INDEX) ? 
-                   "%s USING AUTOMATIC %sINDEX%.0s%s" :
-                   "%s USING %sINDEX %s%s"), 
-               zMsg, ((flags & WHERE_IDX_ONLY) ? "COVERING " : ""),
-               pLoop->u.btree.pIndex->zName, zWhere);
+      assert( !(flags&WHERE_AUTO_INDEX) || (flags&WHERE_IDX_ONLY) );
+      if( !HasRowid(pItem->pTab) && IsPrimaryKeyIndex(pIdx) ){
+        zFmt = zWhere ? "%s USING PRIMARY KEY%.0s%s" : "%s%.0s%s";
+      }else if( flags & WHERE_AUTO_INDEX ){
+        zFmt = "%s USING AUTOMATIC COVERING INDEX%.0s%s";
+      }else if( flags & WHERE_IDX_ONLY ){
+        zFmt = "%s USING COVERING INDEX %s%s";
+      }else{
+        zFmt = "%s USING INDEX %s%s";
+      }
+      zMsg = sqlite3MAppendf(db, zMsg, zFmt, zMsg, pIdx->zName, zWhere);
       sqlite3DbFree(db, zWhere);
     }else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){
       zMsg = sqlite3MAppendf(db, zMsg, "%s USING INTEGER PRIMARY KEY", zMsg);
@@ -112233,7 +113885,7 @@ static Bitmask codeOneLoopStart(
     pLevel->p1 = iCur;
     pLevel->p2 = sqlite3VdbeCurrentAddr(v);
     sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2);
-    sqlite3ExprCachePop(pParse, 1);
+    sqlite3ExprCachePop(pParse);
   }else
 #endif /* SQLITE_OMIT_VIRTUALTABLE */
 
@@ -112429,8 +114081,11 @@ static Bitmask codeOneLoopStart(
     ** the first one after the nEq equality constraints in the index,
     ** this requires some special handling.
     */
+    assert( pWInfo->pOrderBy==0
+         || pWInfo->pOrderBy->nExpr==1
+         || (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)==0 );
     if( (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)!=0
-     && (pWInfo->bOBSat!=0)
+     && pWInfo->nOBSat>0
      && (pIdx->nKeyCol>nEq)
     ){
       assert( pLoop->u.btree.nSkip==0 );
@@ -112579,7 +114234,7 @@ static Bitmask codeOneLoopStart(
       sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg);
       sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
       sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg);  /* Deferred seek */
-    }else{
+    }else if( iCur!=iIdxCur ){
       Index *pPk = sqlite3PrimaryKeyIndex(pIdx->pTable);
       iRowidReg = sqlite3GetTempRange(pParse, pPk->nKeyCol);
       for(j=0; j<pPk->nKeyCol; j++){
@@ -112601,8 +114256,7 @@ static Bitmask codeOneLoopStart(
       pLevel->op = OP_Next;
     }
     pLevel->p1 = iIdxCur;
-    assert( (WHERE_UNQ_WANTED>>16)==1 );
-    pLevel->p3 = (pLoop->wsFlags>>16)&1;
+    pLevel->p3 = (pLoop->wsFlags&WHERE_UNQ_WANTED)!=0 ? 1:0;
     if( (pLoop->wsFlags & WHERE_CONSTRAINT)==0 ){
       pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP;
     }else{
@@ -112650,6 +114304,10 @@ static Bitmask codeOneLoopStart(
     **
     **       B: <after the loop>
     **
+    ** Added 2014-05-26: If the table is a WITHOUT ROWID table, then
+    ** use an ephermeral index instead of a RowSet to record the primary
+    ** keys of the rows we have already seen.
+    **
     */
     WhereClause *pOrWc;    /* The OR-clause broken out into subterms */
     SrcList *pOrTab;       /* Shortened table list or OR-clause generation */
@@ -112663,7 +114321,9 @@ static Bitmask codeOneLoopStart(
     int iRetInit;                             /* Address of regReturn init */
     int untestedTerms = 0;             /* Some terms not completely tested */
     int ii;                            /* Loop counter */
+    u16 wctrlFlags;                    /* Flags for sub-WHERE clause */
     Expr *pAndExpr = 0;                /* An ".. AND (...)" expression */
+    Table *pTab = pTabItem->pTab;
    
     pTerm = pLoop->aLTerm[0];
     assert( pTerm!=0 );
@@ -112696,7 +114356,8 @@ static Bitmask codeOneLoopStart(
     }
 
     /* Initialize the rowset register to contain NULL. An SQL NULL is 
-    ** equivalent to an empty rowset.
+    ** equivalent to an empty rowset.  Or, create an ephermeral index
+    ** capable of holding primary keys in the case of a WITHOUT ROWID.
     **
     ** Also initialize regReturn to contain the address of the instruction 
     ** immediately following the OP_Return at the bottom of the loop. This
@@ -112707,9 +114368,16 @@ static Bitmask codeOneLoopStart(
     ** called on an uninitialized cursor.
     */
     if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){
-      regRowset = ++pParse->nMem;
+      if( HasRowid(pTab) ){
+        regRowset = ++pParse->nMem;
+        sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset);
+      }else{
+        Index *pPk = sqlite3PrimaryKeyIndex(pTab);
+        regRowset = pParse->nTab++;
+        sqlite3VdbeAddOp2(v, OP_OpenEphemeral, regRowset, pPk->nKeyCol);
+        sqlite3VdbeSetP4KeyInfo(pParse, pPk);
+      }
       regRowid = ++pParse->nMem;
-      sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset);
     }
     iRetInit = sqlite3VdbeAddOp2(v, OP_Integer, 0, regReturn);
 
@@ -112745,36 +114413,88 @@ static Bitmask codeOneLoopStart(
       }
     }
 
+    /* Run a separate WHERE clause for each term of the OR clause.  After
+    ** eliminating duplicates from other WHERE clauses, the action for each
+    ** sub-WHERE clause is to to invoke the main loop body as a subroutine.
+    */
+    wctrlFlags =  WHERE_OMIT_OPEN_CLOSE | WHERE_AND_ONLY |
+                  WHERE_FORCE_TABLE | WHERE_ONETABLE_ONLY;
     for(ii=0; ii<pOrWc->nTerm; ii++){
       WhereTerm *pOrTerm = &pOrWc->a[ii];
       if( pOrTerm->leftCursor==iCur || (pOrTerm->eOperator & WO_AND)!=0 ){
-        WhereInfo *pSubWInfo;          /* Info for single OR-term scan */
-        Expr *pOrExpr = pOrTerm->pExpr;
+        WhereInfo *pSubWInfo;           /* Info for single OR-term scan */
+        Expr *pOrExpr = pOrTerm->pExpr; /* Current OR clause term */
+        int j1 = 0;                     /* Address of jump operation */
         if( pAndExpr && !ExprHasProperty(pOrExpr, EP_FromJoin) ){
           pAndExpr->pLeft = pOrExpr;
           pOrExpr = pAndExpr;
         }
         /* Loop through table entries that match term pOrTerm. */
         pSubWInfo = sqlite3WhereBegin(pParse, pOrTab, pOrExpr, 0, 0,
-                        WHERE_OMIT_OPEN_CLOSE | WHERE_AND_ONLY |
-                        WHERE_FORCE_TABLE | WHERE_ONETABLE_ONLY, iCovCur);
+                                      wctrlFlags, iCovCur);
         assert( pSubWInfo || pParse->nErr || db->mallocFailed );
         if( pSubWInfo ){
           WhereLoop *pSubLoop;
           explainOneScan(
               pParse, pOrTab, &pSubWInfo->a[0], iLevel, pLevel->iFrom, 0
           );
+          /* This is the sub-WHERE clause body.  First skip over
+          ** duplicate rows from prior sub-WHERE clauses, and record the
+          ** rowid (or PRIMARY KEY) for the current row so that the same
+          ** row will be skipped in subsequent sub-WHERE clauses.
+          */
           if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){
-            int iSet = ((ii==pOrWc->nTerm-1)?-1:ii);
             int r;
-            r = sqlite3ExprCodeGetColumn(pParse, pTabItem->pTab, -1, iCur, 
-                                         regRowid, 0);
-            sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset,
-                                 sqlite3VdbeCurrentAddr(v)+2, r, iSet);
-            VdbeCoverage(v);
+            int iSet = ((ii==pOrWc->nTerm-1)?-1:ii);
+            if( HasRowid(pTab) ){
+              r = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iCur, regRowid, 0);
+              j1 = sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset, 0, r,iSet);
+              VdbeCoverage(v);
+            }else{
+              Index *pPk = sqlite3PrimaryKeyIndex(pTab);
+              int nPk = pPk->nKeyCol;
+              int iPk;
+
+              /* Read the PK into an array of temp registers. */
+              r = sqlite3GetTempRange(pParse, nPk);
+              for(iPk=0; iPk<nPk; iPk++){
+                int iCol = pPk->aiColumn[iPk];
+                sqlite3ExprCodeGetColumn(pParse, pTab, iCol, iCur, r+iPk, 0);
+              }
+
+              /* Check if the temp table already contains this key. If so,
+              ** the row has already been included in the result set and
+              ** can be ignored (by jumping past the Gosub below). Otherwise,
+              ** insert the key into the temp table and proceed with processing
+              ** the row.
+              **
+              ** Use some of the same optimizations as OP_RowSetTest: If iSet
+              ** is zero, assume that the key cannot already be present in
+              ** the temp table. And if iSet is -1, assume that there is no 
+              ** need to insert the key into the temp table, as it will never 
+              ** be tested for.  */ 
+              if( iSet ){
+                j1 = sqlite3VdbeAddOp4Int(v, OP_Found, regRowset, 0, r, nPk);
+                VdbeCoverage(v);
+              }
+              if( iSet>=0 ){
+                sqlite3VdbeAddOp3(v, OP_MakeRecord, r, nPk, regRowid);
+                sqlite3VdbeAddOp3(v, OP_IdxInsert, regRowset, regRowid, 0);
+                if( iSet ) sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
+              }
+
+              /* Release the array of temp registers */
+              sqlite3ReleaseTempRange(pParse, r, nPk);
+            }
           }
+
+          /* Invoke the main loop body as a subroutine */
           sqlite3VdbeAddOp2(v, OP_Gosub, regReturn, iLoopBody);
 
+          /* Jump here (skipping the main loop body subroutine) if the
+          ** current sub-WHERE row is a duplicate from prior sub-WHEREs. */
+          if( j1 ) sqlite3VdbeJumpHere(v, j1);
+
           /* The pSubWInfo->untestedTerms flag means that this OR term
           ** contained one or more AND term from a notReady table.  The
           ** terms from the notReady table could not be tested and will
@@ -112798,9 +114518,11 @@ static Bitmask codeOneLoopStart(
           assert( (pSubLoop->wsFlags & WHERE_AUTO_INDEX)==0 );
           if( (pSubLoop->wsFlags & WHERE_INDEXED)!=0
            && (ii==0 || pSubLoop->u.btree.pIndex==pCov)
+           && (HasRowid(pTab) || !IsPrimaryKeyIndex(pSubLoop->u.btree.pIndex))
           ){
             assert( pSubWInfo->a[0].iIdxCur==iCovCur );
             pCov = pSubLoop->u.btree.pIndex;
+            wctrlFlags |= WHERE_REOPEN_IDX;
           }else{
             pCov = 0;
           }
@@ -112979,7 +114701,7 @@ static void whereLoopPrint(WhereLoop *p, WhereClause *pWC){
     sqlite3DebugPrintf(" %-19s", z);
     sqlite3_free(z);
   }
-  sqlite3DebugPrintf(" f %04x N %d", p->wsFlags, p->nLTerm);
+  sqlite3DebugPrintf(" f %05x N %d", p->wsFlags, p->nLTerm);
   sqlite3DebugPrintf(" cost %d,%d,%d\n", p->rSetup, p->rRun, p->nOut);
 #ifdef SQLITE_ENABLE_TREE_EXPLAIN
   /* If the 0x100 bit of wheretracing is set, then show all of the constraint
@@ -113102,6 +114824,161 @@ static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){
 }
 
 /*
+** Return TRUE if both of the following are true:
+**
+**   (1)  X has the same or lower cost that Y
+**   (2)  X is a proper subset of Y
+**
+** By "proper subset" we mean that X uses fewer WHERE clause terms
+** than Y and that every WHERE clause term used by X is also used
+** by Y.
+**
+** If X is a proper subset of Y then Y is a better choice and ought
+** to have a lower cost.  This routine returns TRUE when that cost 
+** relationship is inverted and needs to be adjusted.
+*/
+static int whereLoopCheaperProperSubset(
+  const WhereLoop *pX,       /* First WhereLoop to compare */
+  const WhereLoop *pY        /* Compare against this WhereLoop */
+){
+  int i, j;
+  if( pX->nLTerm >= pY->nLTerm ) return 0; /* X is not a subset of Y */
+  if( pX->rRun >= pY->rRun ){
+    if( pX->rRun > pY->rRun ) return 0;    /* X costs more than Y */
+    if( pX->nOut > pY->nOut ) return 0;    /* X costs more than Y */
+  }
+  for(i=pX->nLTerm-1; i>=0; i--){
+    for(j=pY->nLTerm-1; j>=0; j--){
+      if( pY->aLTerm[j]==pX->aLTerm[i] ) break;
+    }
+    if( j<0 ) return 0;  /* X not a subset of Y since term X[i] not used by Y */
+  }
+  return 1;  /* All conditions meet */
+}
+
+/*
+** Try to adjust the cost of WhereLoop pTemplate upwards or downwards so
+** that:
+**
+**   (1) pTemplate costs less than any other WhereLoops that are a proper
+**       subset of pTemplate
+**
+**   (2) pTemplate costs more than any other WhereLoops for which pTemplate
+**       is a proper subset.
+**
+** To say "WhereLoop X is a proper subset of Y" means that X uses fewer
+** WHERE clause terms than Y and that every WHERE clause term used by X is
+** also used by Y.
+**
+** This adjustment is omitted for SKIPSCAN loops.  In a SKIPSCAN loop, the
+** WhereLoop.nLTerm field is not an accurate measure of the number of WHERE
+** clause terms covered, since some of the first nLTerm entries in aLTerm[]
+** will be NULL (because they are skipped).  That makes it more difficult
+** to compare the loops.  We could add extra code to do the comparison, and
+** perhaps we will someday.  But SKIPSCAN is sufficiently uncommon, and this
+** adjustment is sufficient minor, that it is very difficult to construct
+** a test case where the extra code would improve the query plan.  Better
+** to avoid the added complexity and just omit cost adjustments to SKIPSCAN
+** loops.
+*/
+static void whereLoopAdjustCost(const WhereLoop *p, WhereLoop *pTemplate){
+  if( (pTemplate->wsFlags & WHERE_INDEXED)==0 ) return;
+  if( (pTemplate->wsFlags & WHERE_SKIPSCAN)!=0 ) return;
+  for(; p; p=p->pNextLoop){
+    if( p->iTab!=pTemplate->iTab ) continue;
+    if( (p->wsFlags & WHERE_INDEXED)==0 ) continue;
+    if( (p->wsFlags & WHERE_SKIPSCAN)!=0 ) continue;
+    if( whereLoopCheaperProperSubset(p, pTemplate) ){
+      /* Adjust pTemplate cost downward so that it is cheaper than its 
+      ** subset p */
+      pTemplate->rRun = p->rRun;
+      pTemplate->nOut = p->nOut - 1;
+    }else if( whereLoopCheaperProperSubset(pTemplate, p) ){
+      /* Adjust pTemplate cost upward so that it is costlier than p since
+      ** pTemplate is a proper subset of p */
+      pTemplate->rRun = p->rRun;
+      pTemplate->nOut = p->nOut + 1;
+    }
+  }
+}
+
+/*
+** Search the list of WhereLoops in *ppPrev looking for one that can be
+** supplanted by pTemplate.
+**
+** Return NULL if the WhereLoop list contains an entry that can supplant
+** pTemplate, in other words if pTemplate does not belong on the list.
+**
+** If pX is a WhereLoop that pTemplate can supplant, then return the
+** link that points to pX.
+**
+** If pTemplate cannot supplant any existing element of the list but needs
+** to be added to the list, then return a pointer to the tail of the list.
+*/
+static WhereLoop **whereLoopFindLesser(
+  WhereLoop **ppPrev,
+  const WhereLoop *pTemplate
+){
+  WhereLoop *p;
+  for(p=(*ppPrev); p; ppPrev=&p->pNextLoop, p=*ppPrev){
+    if( p->iTab!=pTemplate->iTab || p->iSortIdx!=pTemplate->iSortIdx ){
+      /* If either the iTab or iSortIdx values for two WhereLoop are different
+      ** then those WhereLoops need to be considered separately.  Neither is
+      ** a candidate to replace the other. */
+      continue;
+    }
+    /* In the current implementation, the rSetup value is either zero
+    ** or the cost of building an automatic index (NlogN) and the NlogN
+    ** is the same for compatible WhereLoops. */
+    assert( p->rSetup==0 || pTemplate->rSetup==0 
+                 || p->rSetup==pTemplate->rSetup );
+
+    /* whereLoopAddBtree() always generates and inserts the automatic index
+    ** case first.  Hence compatible candidate WhereLoops never have a larger
+    ** rSetup. Call this SETUP-INVARIANT */
+    assert( p->rSetup>=pTemplate->rSetup );
+
+    /* Any loop using an appliation-defined index (or PRIMARY KEY or
+    ** UNIQUE constraint) with one or more == constraints is better
+    ** than an automatic index. */
+    if( (p->wsFlags & WHERE_AUTO_INDEX)!=0
+     && (pTemplate->wsFlags & WHERE_INDEXED)!=0
+     && (pTemplate->wsFlags & WHERE_COLUMN_EQ)!=0
+     && (p->prereq & pTemplate->prereq)==pTemplate->prereq
+    ){
+      break;
+    }
+
+    /* If existing WhereLoop p is better than pTemplate, pTemplate can be
+    ** discarded.  WhereLoop p is better if:
+    **   (1)  p has no more dependencies than pTemplate, and
+    **   (2)  p has an equal or lower cost than pTemplate
+    */
+    if( (p->prereq & pTemplate->prereq)==p->prereq    /* (1)  */
+     && p->rSetup<=pTemplate->rSetup                  /* (2a) */
+     && p->rRun<=pTemplate->rRun                      /* (2b) */
+     && p->nOut<=pTemplate->nOut                      /* (2c) */
+    ){
+      return 0;  /* Discard pTemplate */
+    }
+
+    /* If pTemplate is always better than p, then cause p to be overwritten
+    ** with pTemplate.  pTemplate is better than p if:
+    **   (1)  pTemplate has no more dependences than p, and
+    **   (2)  pTemplate has an equal or lower cost than p.
+    */
+    if( (p->prereq & pTemplate->prereq)==pTemplate->prereq   /* (1)  */
+     && p->rRun>=pTemplate->rRun                             /* (2a) */
+     && p->nOut>=pTemplate->nOut                             /* (2b) */
+    ){
+      assert( p->rSetup>=pTemplate->rSetup ); /* SETUP-INVARIANT above */
+      break;   /* Cause p to be overwritten by pTemplate */
+    }
+  }
+  return ppPrev;
+}
+
+/*
 ** Insert or replace a WhereLoop entry using the template supplied.
 **
 ** An existing WhereLoop entry might be overwritten if the new template
@@ -113110,25 +114987,23 @@ static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){
 ** fewer dependencies than the template.  Otherwise a new WhereLoop is
 ** added based on the template.
 **
-** If pBuilder->pOrSet is not NULL then we only care about only the
+** If pBuilder->pOrSet is not NULL then we care about only the
 ** prerequisites and rRun and nOut costs of the N best loops.  That
 ** information is gathered in the pBuilder->pOrSet object.  This special
 ** processing mode is used only for OR clause processing.
 **
 ** When accumulating multiple loops (when pBuilder->pOrSet is NULL) we
 ** still might overwrite similar loops with the new template if the
-** template is better.  Loops may be overwritten if the following 
+** new template is better.  Loops may be overwritten if the following 
 ** conditions are met:
 **
 **    (1)  They have the same iTab.
 **    (2)  They have the same iSortIdx.
 **    (3)  The template has same or fewer dependencies than the current loop
 **    (4)  The template has the same or lower cost than the current loop
-**    (5)  The template uses more terms of the same index but has no additional
-**         dependencies          
 */
 static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){
-  WhereLoop **ppPrev, *p, *pNext = 0;
+  WhereLoop **ppPrev, *p;
   WhereInfo *pWInfo = pBuilder->pWInfo;
   sqlite3 *db = pWInfo->pParse->db;
 
@@ -113151,64 +115026,23 @@ static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){
     return SQLITE_OK;
   }
 
-  /* Search for an existing WhereLoop to overwrite, or which takes
-  ** priority over pTemplate.
+  /* Look for an existing WhereLoop to replace with pTemplate
   */
-  for(ppPrev=&pWInfo->pLoops, p=*ppPrev; p; ppPrev=&p->pNextLoop, p=*ppPrev){
-    if( p->iTab!=pTemplate->iTab || p->iSortIdx!=pTemplate->iSortIdx ){
-      /* If either the iTab or iSortIdx values for two WhereLoop are different
-      ** then those WhereLoops need to be considered separately.  Neither is
-      ** a candidate to replace the other. */
-      continue;
-    }
-    /* In the current implementation, the rSetup value is either zero
-    ** or the cost of building an automatic index (NlogN) and the NlogN
-    ** is the same for compatible WhereLoops. */
-    assert( p->rSetup==0 || pTemplate->rSetup==0 
-                 || p->rSetup==pTemplate->rSetup );
+  whereLoopAdjustCost(pWInfo->pLoops, pTemplate);
+  ppPrev = whereLoopFindLesser(&pWInfo->pLoops, pTemplate);
 
-    /* whereLoopAddBtree() always generates and inserts the automatic index
-    ** case first.  Hence compatible candidate WhereLoops never have a larger
-    ** rSetup. Call this SETUP-INVARIANT */
-    assert( p->rSetup>=pTemplate->rSetup );
-
-    if( (p->prereq & pTemplate->prereq)==p->prereq
-     && p->rSetup<=pTemplate->rSetup
-     && p->rRun<=pTemplate->rRun
-     && p->nOut<=pTemplate->nOut
-    ){
-      /* This branch taken when p is equal or better than pTemplate in 
-      ** all of (1) dependencies (2) setup-cost, (3) run-cost, and
-      ** (4) number of output rows. */
-      assert( p->rSetup==pTemplate->rSetup );
-      if( p->prereq==pTemplate->prereq
-       && p->nLTerm<pTemplate->nLTerm
-       && (p->wsFlags & pTemplate->wsFlags & WHERE_INDEXED)!=0
-       && (p->u.btree.pIndex==pTemplate->u.btree.pIndex
-          || pTemplate->rRun+p->nLTerm<=p->rRun+pTemplate->nLTerm)
-      ){
-        /* Overwrite an existing WhereLoop with an similar one that uses
-        ** more terms of the index */
-        pNext = p->pNextLoop;
-        break;
-      }else{
-        /* pTemplate is not helpful.
-        ** Return without changing or adding anything */
-        goto whereLoopInsert_noop;
-      }
-    }
-    if( (p->prereq & pTemplate->prereq)==pTemplate->prereq
-     && p->rRun>=pTemplate->rRun
-     && p->nOut>=pTemplate->nOut
-    ){
-      /* Overwrite an existing WhereLoop with a better one: one that is
-      ** better at one of (1) dependencies, (2) setup-cost, (3) run-cost
-      ** or (4) number of output rows, and is no worse in any of those
-      ** categories. */
-      assert( p->rSetup>=pTemplate->rSetup ); /* SETUP-INVARIANT above */
-      pNext = p->pNextLoop;
-      break;
+  if( ppPrev==0 ){
+    /* There already exists a WhereLoop on the list that is better
+    ** than pTemplate, so just ignore pTemplate */
+#if WHERETRACE_ENABLED /* 0x8 */
+    if( sqlite3WhereTrace & 0x8 ){
+      sqlite3DebugPrintf("ins-noop: ");
+      whereLoopPrint(pTemplate, pBuilder->pWC);
     }
+#endif
+    return SQLITE_OK;  
+  }else{
+    p = *ppPrev;
   }
 
   /* If we reach this point it means that either p[] should be overwritten
@@ -113226,13 +115060,33 @@ static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){
   }
 #endif
   if( p==0 ){
-    p = sqlite3DbMallocRaw(db, sizeof(WhereLoop));
+    /* Allocate a new WhereLoop to add to the end of the list */
+    *ppPrev = p = sqlite3DbMallocRaw(db, sizeof(WhereLoop));
     if( p==0 ) return SQLITE_NOMEM;
     whereLoopInit(p);
+    p->pNextLoop = 0;
+  }else{
+    /* We will be overwriting WhereLoop p[].  But before we do, first
+    ** go through the rest of the list and delete any other entries besides
+    ** p[] that are also supplated by pTemplate */
+    WhereLoop **ppTail = &p->pNextLoop;
+    WhereLoop *pToDel;
+    while( *ppTail ){
+      ppTail = whereLoopFindLesser(ppTail, pTemplate);
+      if( ppTail==0 ) break;
+      pToDel = *ppTail;
+      if( pToDel==0 ) break;
+      *ppTail = pToDel->pNextLoop;
+#if WHERETRACE_ENABLED /* 0x8 */
+      if( sqlite3WhereTrace & 0x8 ){
+        sqlite3DebugPrintf("ins-del:  ");
+        whereLoopPrint(pToDel, pBuilder->pWC);
+      }
+#endif
+      whereLoopDelete(db, pToDel);
+    }
   }
   whereLoopXfer(db, p, pTemplate);
-  p->pNextLoop = pNext;
-  *ppPrev = p;
   if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){
     Index *pIndex = p->u.btree.pIndex;
     if( pIndex && pIndex->tnum==0 ){
@@ -113240,16 +115094,6 @@ static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){
     }
   }
   return SQLITE_OK;
-
-  /* Jump here if the insert is a no-op */
-whereLoopInsert_noop:
-#if WHERETRACE_ENABLED /* 0x8 */
-  if( sqlite3WhereTrace & 0x8 ){
-    sqlite3DebugPrintf("ins-noop: ");
-    whereLoopPrint(pTemplate, pBuilder->pWC);
-  }
-#endif
-  return SQLITE_OK;  
 }
 
 /*
@@ -113279,13 +115123,30 @@ static void whereLoopOutputAdjust(WhereClause *pWC, WhereLoop *pLoop){
       if( pX==pTerm ) break;
       if( pX->iParent>=0 && (&pWC->a[pX->iParent])==pTerm ) break;
     }
-    if( j<0 ) pLoop->nOut += pTerm->truthProb;
+    if( j<0 ){
+      pLoop->nOut += (pTerm->truthProb<=0 ? pTerm->truthProb : -1);
+    }
   }
 }
 
 /*
-** We have so far matched pBuilder->pNew->u.btree.nEq terms of the index pIndex.
-** Try to match one more.
+** Adjust the cost C by the costMult facter T.  This only occurs if
+** compiled with -DSQLITE_ENABLE_COSTMULT
+*/
+#ifdef SQLITE_ENABLE_COSTMULT
+# define ApplyCostMultiplier(C,T)  C += T
+#else
+# define ApplyCostMultiplier(C,T)
+#endif
+
+/*
+** We have so far matched pBuilder->pNew->u.btree.nEq terms of the 
+** index pIndex. Try to match one more.
+**
+** When this function is called, pBuilder->pNew->nOut contains the 
+** number of rows expected to be visited by filtering using the nEq 
+** terms only. If it is modified, this value is restored before this 
+** function returns.
 **
 ** If pProbe->tnum==0, that means pIndex is a fake index used for the
 ** INTEGER PRIMARY KEY.
@@ -113311,7 +115172,6 @@ static int whereLoopAddBtreeIndex(
   LogEst saved_nOut;              /* Original value of pNew->nOut */
   int iCol;                       /* Index of the column in the table */
   int rc = SQLITE_OK;             /* Return code */
-  LogEst nRowEst;                 /* Estimated index selectivity */
   LogEst rLogSize;                /* Logarithm of table size */
   WhereTerm *pTop = 0, *pBtm = 0; /* Top and bottom range constraints */
 
@@ -113329,15 +115189,9 @@ static int whereLoopAddBtreeIndex(
   }
   if( pProbe->bUnordered ) opMask &= ~(WO_GT|WO_GE|WO_LT|WO_LE);
 
-  assert( pNew->u.btree.nEq<=pProbe->nKeyCol );
-  if( pNew->u.btree.nEq < pProbe->nKeyCol ){
-    iCol = pProbe->aiColumn[pNew->u.btree.nEq];
-    nRowEst = sqlite3LogEst(pProbe->aiRowEst[pNew->u.btree.nEq+1]);
-    if( nRowEst==0 && pProbe->onError==OE_None ) nRowEst = 1;
-  }else{
-    iCol = -1;
-    nRowEst = 0;
-  }
+  assert( pNew->u.btree.nEq<pProbe->nColumn );
+  iCol = pProbe->aiColumn[pNew->u.btree.nEq];
+
   pTerm = whereScanInit(&scan, pBuilder->pWC, pSrc->iCursor, iCol,
                         opMask, pProbe);
   saved_nEq = pNew->u.btree.nEq;
@@ -113347,18 +115201,23 @@ static int whereLoopAddBtreeIndex(
   saved_prereq = pNew->prereq;
   saved_nOut = pNew->nOut;
   pNew->rSetup = 0;
-  rLogSize = estLog(sqlite3LogEst(pProbe->aiRowEst[0]));
+  rLogSize = estLog(pProbe->aiRowLogEst[0]);
 
   /* Consider using a skip-scan if there are no WHERE clause constraints
   ** available for the left-most terms of the index, and if the average
-  ** number of repeats in the left-most terms is at least 18.  The magic
-  ** number 18 was found by experimentation to be the payoff point where
-  ** skip-scan become faster than a full-scan.
-  */
+  ** number of repeats in the left-most terms is at least 18. 
+  **
+  ** The magic number 18 is selected on the basis that scanning 17 rows
+  ** is almost always quicker than an index seek (even though if the index
+  ** contains fewer than 2^17 rows we assume otherwise in other parts of
+  ** the code). And, even if it is not, it should not be too much slower. 
+  ** On the other hand, the extra seeks could end up being significantly
+  ** more expensive.  */
+  assert( 42==sqlite3LogEst(18) );
   if( pTerm==0
    && saved_nEq==saved_nSkip
    && saved_nEq+1<pProbe->nKeyCol
-   && pProbe->aiRowEst[saved_nEq+1]>=18  /* TUNING: Minimum for skip-scan */
+   && pProbe->aiRowLogEst[saved_nEq+1]>=42  /* TUNING: Minimum for skip-scan */
    && (rc = whereLoopResize(db, pNew, pNew->nLTerm+1))==SQLITE_OK
   ){
     LogEst nIter;
@@ -113366,34 +115225,40 @@ static int whereLoopAddBtreeIndex(
     pNew->u.btree.nSkip++;
     pNew->aLTerm[pNew->nLTerm++] = 0;
     pNew->wsFlags |= WHERE_SKIPSCAN;
-    nIter = sqlite3LogEst(pProbe->aiRowEst[0]/pProbe->aiRowEst[saved_nEq+1]);
-    pNew->rRun = rLogSize + nIter;
-    pNew->nOut += nIter;
-    whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nIter);
+    nIter = pProbe->aiRowLogEst[saved_nEq] - pProbe->aiRowLogEst[saved_nEq+1];
+    pNew->nOut -= nIter;
+    whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nIter + nInMul);
     pNew->nOut = saved_nOut;
   }
   for(; rc==SQLITE_OK && pTerm!=0; pTerm = whereScanNext(&scan)){
+    u16 eOp = pTerm->eOperator;   /* Shorthand for pTerm->eOperator */
+    LogEst rCostIdx;
+    LogEst nOutUnadjusted;        /* nOut before IN() and WHERE adjustments */
     int nIn = 0;
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
     int nRecValid = pBuilder->nRecValid;
 #endif
-    if( (pTerm->eOperator==WO_ISNULL || (pTerm->wtFlags&TERM_VNULL)!=0)
+    if( (eOp==WO_ISNULL || (pTerm->wtFlags&TERM_VNULL)!=0)
      && (iCol<0 || pSrc->pTab->aCol[iCol].notNull)
     ){
       continue; /* ignore IS [NOT] NULL constraints on NOT NULL columns */
     }
     if( pTerm->prereqRight & pNew->maskSelf ) continue;
 
-    assert( pNew->nOut==saved_nOut );
-
     pNew->wsFlags = saved_wsFlags;
     pNew->u.btree.nEq = saved_nEq;
     pNew->nLTerm = saved_nLTerm;
     if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */
     pNew->aLTerm[pNew->nLTerm++] = pTerm;
     pNew->prereq = (saved_prereq | pTerm->prereqRight) & ~pNew->maskSelf;
-    pNew->rRun = rLogSize; /* Baseline cost is log2(N).  Adjustments below */
-    if( pTerm->eOperator & WO_IN ){
+
+    assert( nInMul==0
+        || (pNew->wsFlags & WHERE_COLUMN_NULL)!=0 
+        || (pNew->wsFlags & WHERE_COLUMN_IN)!=0 
+        || (pNew->wsFlags & WHERE_SKIPSCAN)!=0 
+    );
+
+    if( eOp & WO_IN ){
       Expr *pExpr = pTerm->pExpr;
       pNew->wsFlags |= WHERE_COLUMN_IN;
       if( ExprHasProperty(pExpr, EP_xIsSelect) ){
@@ -113403,85 +115268,120 @@ static int whereLoopAddBtreeIndex(
         /* "x IN (value, value, ...)" */
         nIn = sqlite3LogEst(pExpr->x.pList->nExpr);
       }
-      pNew->rRun += nIn;
-      pNew->u.btree.nEq++;
-      pNew->nOut = nRowEst + nInMul + nIn;
-    }else if( pTerm->eOperator & (WO_EQ) ){
-      assert(
-        (pNew->wsFlags & (WHERE_COLUMN_NULL|WHERE_COLUMN_IN|WHERE_SKIPSCAN))!=0
-        || nInMul==0
-      );
+      assert( nIn>0 );  /* RHS always has 2 or more terms...  The parser
+                        ** changes "x IN (?)" into "x=?". */
+
+    }else if( eOp & (WO_EQ) ){
       pNew->wsFlags |= WHERE_COLUMN_EQ;
-      if( iCol<0 || (nInMul==0 && pNew->u.btree.nEq==pProbe->nKeyCol-1)){
-        assert( (pNew->wsFlags & WHERE_COLUMN_IN)==0 || iCol<0 );
-        if( iCol>=0 && pProbe->onError==OE_None ){
+      if( iCol<0 || (nInMul==0 && pNew->u.btree.nEq==pProbe->nKeyCol-1) ){
+        if( iCol>=0 && !IsUniqueIndex(pProbe) ){
           pNew->wsFlags |= WHERE_UNQ_WANTED;
         }else{
           pNew->wsFlags |= WHERE_ONEROW;
         }
       }
-      pNew->u.btree.nEq++;
-      pNew->nOut = nRowEst + nInMul;
-    }else if( pTerm->eOperator & (WO_ISNULL) ){
+    }else if( eOp & WO_ISNULL ){
       pNew->wsFlags |= WHERE_COLUMN_NULL;
-      pNew->u.btree.nEq++;
-      /* TUNING: IS NULL selects 2 rows */
-      nIn = 10;  assert( 10==sqlite3LogEst(2) );
-      pNew->nOut = nRowEst + nInMul + nIn;
-    }else if( pTerm->eOperator & (WO_GT|WO_GE) ){
-      testcase( pTerm->eOperator & WO_GT );
-      testcase( pTerm->eOperator & WO_GE );
+    }else if( eOp & (WO_GT|WO_GE) ){
+      testcase( eOp & WO_GT );
+      testcase( eOp & WO_GE );
       pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_BTM_LIMIT;
       pBtm = pTerm;
       pTop = 0;
     }else{
-      assert( pTerm->eOperator & (WO_LT|WO_LE) );
-      testcase( pTerm->eOperator & WO_LT );
-      testcase( pTerm->eOperator & WO_LE );
+      assert( eOp & (WO_LT|WO_LE) );
+      testcase( eOp & WO_LT );
+      testcase( eOp & WO_LE );
       pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_TOP_LIMIT;
       pTop = pTerm;
       pBtm = (pNew->wsFlags & WHERE_BTM_LIMIT)!=0 ?
                      pNew->aLTerm[pNew->nLTerm-2] : 0;
     }
+
+    /* At this point pNew->nOut is set to the number of rows expected to
+    ** be visited by the index scan before considering term pTerm, or the
+    ** values of nIn and nInMul. In other words, assuming that all 
+    ** "x IN(...)" terms are replaced with "x = ?". This block updates
+    ** the value of pNew->nOut to account for pTerm (but not nIn/nInMul).  */
+    assert( pNew->nOut==saved_nOut );
     if( pNew->wsFlags & WHERE_COLUMN_RANGE ){
-      /* Adjust nOut and rRun for STAT3 range values */
-      assert( pNew->nOut==saved_nOut );
+      /* Adjust nOut using stat3/stat4 data. Or, if there is no stat3/stat4
+      ** data, using some other estimate.  */
       whereRangeScanEst(pParse, pBuilder, pBtm, pTop, pNew);
-    }
+    }else{
+      int nEq = ++pNew->u.btree.nEq;
+      assert( eOp & (WO_ISNULL|WO_EQ|WO_IN) );
+
+      assert( pNew->nOut==saved_nOut );
+      if( pTerm->truthProb<=0 && iCol>=0 ){
+        assert( (eOp & WO_IN) || nIn==0 );
+        testcase( eOp & WO_IN );
+        pNew->nOut += pTerm->truthProb;
+        pNew->nOut -= nIn;
+      }else{
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
-    if( nInMul==0 
-     && pProbe->nSample 
-     && pNew->u.btree.nEq<=pProbe->nSampleCol
-     && OptimizationEnabled(db, SQLITE_Stat3) 
-    ){
-      Expr *pExpr = pTerm->pExpr;
-      tRowcnt nOut = 0;
-      if( (pTerm->eOperator & (WO_EQ|WO_ISNULL))!=0 ){
-        testcase( pTerm->eOperator & WO_EQ );
-        testcase( pTerm->eOperator & WO_ISNULL );
-        rc = whereEqualScanEst(pParse, pBuilder, pExpr->pRight, &nOut);
-      }else if( (pTerm->eOperator & WO_IN)
-             &&  !ExprHasProperty(pExpr, EP_xIsSelect)  ){
-        rc = whereInScanEst(pParse, pBuilder, pExpr->x.pList, &nOut);
-      }
-      assert( nOut==0 || rc==SQLITE_OK );
-      if( nOut ){
-        pNew->nOut = sqlite3LogEst(nOut);
-        if( pNew->nOut>saved_nOut ) pNew->nOut = saved_nOut;
+        tRowcnt nOut = 0;
+        if( nInMul==0 
+         && pProbe->nSample 
+         && pNew->u.btree.nEq<=pProbe->nSampleCol
+         && OptimizationEnabled(db, SQLITE_Stat3) 
+         && ((eOp & WO_IN)==0 || !ExprHasProperty(pTerm->pExpr, EP_xIsSelect))
+        ){
+          Expr *pExpr = pTerm->pExpr;
+          if( (eOp & (WO_EQ|WO_ISNULL))!=0 ){
+            testcase( eOp & WO_EQ );
+            testcase( eOp & WO_ISNULL );
+            rc = whereEqualScanEst(pParse, pBuilder, pExpr->pRight, &nOut);
+          }else{
+            rc = whereInScanEst(pParse, pBuilder, pExpr->x.pList, &nOut);
+          }
+          if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK;
+          if( rc!=SQLITE_OK ) break;          /* Jump out of the pTerm loop */
+          if( nOut ){
+            pNew->nOut = sqlite3LogEst(nOut);
+            if( pNew->nOut>saved_nOut ) pNew->nOut = saved_nOut;
+            pNew->nOut -= nIn;
+          }
+        }
+        if( nOut==0 )
+#endif
+        {
+          pNew->nOut += (pProbe->aiRowLogEst[nEq] - pProbe->aiRowLogEst[nEq-1]);
+          if( eOp & WO_ISNULL ){
+            /* TUNING: If there is no likelihood() value, assume that a 
+            ** "col IS NULL" expression matches twice as many rows 
+            ** as (col=?). */
+            pNew->nOut += 10;
+          }
+        }
       }
     }
-#endif
+
+    /* Set rCostIdx to the cost of visiting selected rows in index. Add
+    ** it to pNew->rRun, which is currently set to the cost of the index
+    ** seek only. Then, if this is a non-covering index, add the cost of
+    ** visiting the rows in the main table.  */
+    rCostIdx = pNew->nOut + 1 + (15*pProbe->szIdxRow)/pSrc->pTab->szTabRow;
+    pNew->rRun = sqlite3LogEstAdd(rLogSize, rCostIdx);
     if( (pNew->wsFlags & (WHERE_IDX_ONLY|WHERE_IPK))==0 ){
-      /* Each row involves a step of the index, then a binary search of
-      ** the main table */
-      pNew->rRun =  sqlite3LogEstAdd(pNew->rRun,rLogSize>27 ? rLogSize-17 : 10);
+      pNew->rRun = sqlite3LogEstAdd(pNew->rRun, pNew->nOut + 16);
     }
-    /* Step cost for each output row */
-    pNew->rRun = sqlite3LogEstAdd(pNew->rRun, pNew->nOut);
+    ApplyCostMultiplier(pNew->rRun, pProbe->pTable->costMult);
+
+    nOutUnadjusted = pNew->nOut;
+    pNew->rRun += nInMul + nIn;
+    pNew->nOut += nInMul + nIn;
     whereLoopOutputAdjust(pBuilder->pWC, pNew);
     rc = whereLoopInsert(pBuilder, pNew);
+
+    if( pNew->wsFlags & WHERE_COLUMN_RANGE ){
+      pNew->nOut = saved_nOut;
+    }else{
+      pNew->nOut = nOutUnadjusted;
+    }
+
     if( (pNew->wsFlags & WHERE_TOP_LIMIT)==0
-     && pNew->u.btree.nEq<(pProbe->nKeyCol + (pProbe->zName!=0))
+     && pNew->u.btree.nEq<pProbe->nColumn
     ){
       whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nInMul+nIn);
     }
@@ -113563,6 +115463,37 @@ static int whereUsablePartialIndex(int iTab, WhereClause *pWC, Expr *pWhere){
 ** Add all WhereLoop objects for a single table of the join where the table
 ** is idenfied by pBuilder->pNew->iTab.  That table is guaranteed to be
 ** a b-tree table, not a virtual table.
+**
+** The costs (WhereLoop.rRun) of the b-tree loops added by this function
+** are calculated as follows:
+**
+** For a full scan, assuming the table (or index) contains nRow rows:
+**
+**     cost = nRow * 3.0                    // full-table scan
+**     cost = nRow * K                      // scan of covering index
+**     cost = nRow * (K+3.0)                // scan of non-covering index
+**
+** where K is a value between 1.1 and 3.0 set based on the relative 
+** estimated average size of the index and table records.
+**
+** For an index scan, where nVisit is the number of index rows visited
+** by the scan, and nSeek is the number of seek operations required on 
+** the index b-tree:
+**
+**     cost = nSeek * (log(nRow) + K * nVisit)          // covering index
+**     cost = nSeek * (log(nRow) + (K+3.0) * nVisit)    // non-covering index
+**
+** Normally, nSeek is 1. nSeek values greater than 1 come about if the 
+** WHERE clause includes "x IN (....)" terms used in place of "x=?". Or when 
+** implicit "x IN (SELECT x FROM tbl)" terms are added for skip-scans.
+**
+** The estimated values (nRow, nVisit, nSeek) often contain a large amount
+** of uncertainty.  For this reason, scoring is designed to pick plans that
+** "do the least harm" if the estimates are inaccurate.  For example, a
+** log(nRow) factor is omitted from a non-covering index scan in order to
+** bias the scoring in favor of using an index, since the worst-case
+** performance of using an index is far better than the worst-case performance
+** of a full table scan.
 */
 static int whereLoopAddBtree(
   WhereLoopBuilder *pBuilder, /* WHERE clause information */
@@ -113571,7 +115502,7 @@ static int whereLoopAddBtree(
   WhereInfo *pWInfo;          /* WHERE analysis context */
   Index *pProbe;              /* An index we are evaluating */
   Index sPk;                  /* A fake index object for the primary key */
-  tRowcnt aiRowEstPk[2];      /* The aiRowEst[] value for the sPk index */
+  LogEst aiRowEstPk[2];       /* The aiRowLogEst[] value for the sPk index */
   i16 aiColumnPk = -1;        /* The aColumn[] value for the sPk index */
   SrcList *pTabList;          /* The FROM clause */
   struct SrcList_item *pSrc;  /* The FROM clause btree term to add */
@@ -113605,12 +115536,14 @@ static int whereLoopAddBtree(
     Index *pFirst;                  /* First of real indices on the table */
     memset(&sPk, 0, sizeof(Index));
     sPk.nKeyCol = 1;
+    sPk.nColumn = 1;
     sPk.aiColumn = &aiColumnPk;
-    sPk.aiRowEst = aiRowEstPk;
+    sPk.aiRowLogEst = aiRowEstPk;
     sPk.onError = OE_Replace;
     sPk.pTable = pTab;
-    aiRowEstPk[0] = pTab->nRowEst;
-    aiRowEstPk[1] = 1;
+    sPk.szIdxRow = pTab->szTabRow;
+    aiRowEstPk[0] = pTab->nRowLogEst;
+    aiRowEstPk[1] = 0;
     pFirst = pSrc->pTab->pIndex;
     if( pSrc->notIndexed==0 ){
       /* The real indices of the table are only considered if the
@@ -113619,7 +115552,7 @@ static int whereLoopAddBtree(
     }
     pProbe = &sPk;
   }
-  rSize = sqlite3LogEst(pTab->nRowEst);
+  rSize = pTab->nRowLogEst;
   rLogSize = estLog(rSize);
 
 #ifndef SQLITE_OMIT_AUTOMATIC_INDEX
@@ -113648,6 +115581,7 @@ static int whereLoopAddBtree(
         ** approximately 7*N*log2(N) where N is the number of rows in
         ** the table being indexed. */
         pNew->rSetup = rLogSize + rSize + 28;  assert( 28==sqlite3LogEst(7) );
+        ApplyCostMultiplier(pNew->rSetup, pTab->costMult);
         /* TUNING: Each index lookup yields 20 rows in the table.  This
         ** is more than the usual guess of 10 rows, since we have no way
         ** of knowning how selective the index will ultimately be.  It would
@@ -113669,6 +115603,7 @@ static int whereLoopAddBtree(
      && !whereUsablePartialIndex(pNew->iTab, pWC, pProbe->pPartIdxWhere) ){
       continue;  /* Partial index inappropriate for this query */
     }
+    rSize = pProbe->aiRowLogEst[0];
     pNew->u.btree.nEq = 0;
     pNew->u.btree.nSkip = 0;
     pNew->nLTerm = 0;
@@ -113686,10 +115621,9 @@ static int whereLoopAddBtree(
 
       /* Full table scan */
       pNew->iSortIdx = b ? iSortIdx : 0;
-      /* TUNING: Cost of full table scan is 3*(N + log2(N)).
-      **  +  The extra 3 factor is to encourage the use of indexed lookups
-      **     over full scans.  FIXME */
-      pNew->rRun = sqlite3LogEstAdd(rSize,rLogSize) + 16;
+      /* TUNING: Cost of full table scan is (N*3.0). */
+      pNew->rRun = rSize + 16;
+      ApplyCostMultiplier(pNew->rRun, pTab->costMult);
       whereLoopOutputAdjust(pWC, pNew);
       rc = whereLoopInsert(pBuilder, pNew);
       pNew->nOut = rSize;
@@ -113716,19 +115650,16 @@ static int whereLoopAddBtree(
           )
       ){
         pNew->iSortIdx = b ? iSortIdx : 0;
-        if( m==0 ){
-          /* TUNING: Cost of a covering index scan is K*(N + log2(N)).
-          **  +  The extra factor K of between 1.1 and 3.0 that depends
-          **     on the relative sizes of the table and the index.  K
-          **     is smaller for smaller indices, thus favoring them.
-          */
-          pNew->rRun = sqlite3LogEstAdd(rSize,rLogSize) + 1 +
-                        (15*pProbe->szIdxRow)/pTab->szTabRow;
-        }else{
-          /* TUNING: Cost of scanning a non-covering index is (N+1)*log2(N)
-          ** which we will simplify to just N*log2(N) */
-          pNew->rRun = rSize + rLogSize;
+
+        /* The cost of visiting the index rows is N*K, where K is
+        ** between 1.1 and 3.0, depending on the relative sizes of the
+        ** index and table rows. If this is a non-covering index scan,
+        ** also add the cost of visiting table rows (N*3.0).  */
+        pNew->rRun = rSize + 1 + (15*pProbe->szIdxRow)/pTab->szTabRow;
+        if( m!=0 ){
+          pNew->rRun = sqlite3LogEstAdd(pNew->rRun, rSize+16);
         }
+        ApplyCostMultiplier(pNew->rRun, pTab->costMult);
         whereLoopOutputAdjust(pWC, pNew);
         rc = whereLoopInsert(pBuilder, pNew);
         pNew->nOut = rSize;
@@ -113899,8 +115830,8 @@ static int whereLoopAddVirtual(
       pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr;
       pIdxInfo->needToFreeIdxStr = 0;
       pNew->u.vtab.idxStr = pIdxInfo->idxStr;
-      pNew->u.vtab.isOrdered = (u8)((pIdxInfo->nOrderBy!=0)
-                                     && pIdxInfo->orderByConsumed);
+      pNew->u.vtab.isOrdered = (i8)(pIdxInfo->orderByConsumed ?
+                                      pIdxInfo->nOrderBy : 0);
       pNew->rSetup = 0;
       pNew->rRun = sqlite3LogEstFromDouble(pIdxInfo->estimatedCost);
       pNew->nOut = sqlite3LogEst(pIdxInfo->estimatedRows);
@@ -113932,7 +115863,7 @@ static int whereLoopAddOr(WhereLoopBuilder *pBuilder, Bitmask mExtra){
   int iCur;
   WhereClause tempWC;
   WhereLoopBuilder sSubBuild;
-  WhereOrSet sSum, sCur, sPrev;
+  WhereOrSet sSum, sCur;
   struct SrcList_item *pItem;
   
   pWC = pBuilder->pWC;
@@ -113941,7 +115872,6 @@ static int whereLoopAddOr(WhereLoopBuilder *pBuilder, Bitmask mExtra){
   pNew = pBuilder->pNew;
   memset(&sSum, 0, sizeof(sSum));
   pItem = pWInfo->pTabList->a + pNew->iTab;
-  if( !HasRowid(pItem->pTab) ) return SQLITE_OK;
   iCur = pItem->iCursor;
 
   for(pTerm=pWC->a; pTerm<pWCEnd && rc==SQLITE_OK; pTerm++){
@@ -113988,6 +115918,7 @@ static int whereLoopAddOr(WhereLoopBuilder *pBuilder, Bitmask mExtra){
           whereOrMove(&sSum, &sCur);
           once = 0;
         }else{
+          WhereOrSet sPrev;
           whereOrMove(&sPrev, &sSum);
           sSum.n = 0;
           for(i=0; i<sPrev.n; i++){
@@ -114006,8 +115937,19 @@ static int whereLoopAddOr(WhereLoopBuilder *pBuilder, Bitmask mExtra){
       pNew->iSortIdx = 0;
       memset(&pNew->u, 0, sizeof(pNew->u));
       for(i=0; rc==SQLITE_OK && i<sSum.n; i++){
-        /* TUNING: Multiple by 3.5 for the secondary table lookup */
-        pNew->rRun = sSum.a[i].rRun + 18;
+        /* TUNING: Currently sSum.a[i].rRun is set to the sum of the costs
+        ** of all sub-scans required by the OR-scan. However, due to rounding
+        ** errors, it may be that the cost of the OR-scan is equal to its
+        ** most expensive sub-scan. Add the smallest possible penalty 
+        ** (equivalent to multiplying the cost by 1.07) to ensure that 
+        ** this does not happen. Otherwise, for WHERE clauses such as the
+        ** following where there is an index on "y":
+        **
+        **     WHERE likelihood(x=?, 0.99) OR y=?
+        **
+        ** the planner may elect to "OR" together a full-table scan and an
+        ** index lookup. And other similarly odd results.  */
+        pNew->rRun = sSum.a[i].rRun + 1;
         pNew->nOut = sSum.a[i].nOut;
         pNew->prereq = sSum.a[i].prereq;
         rc = whereLoopInsert(pBuilder, pNew);
@@ -114061,21 +116003,21 @@ static int whereLoopAddAll(WhereLoopBuilder *pBuilder){
 /*
 ** Examine a WherePath (with the addition of the extra WhereLoop of the 5th
 ** parameters) to see if it outputs rows in the requested ORDER BY
-** (or GROUP BY) without requiring a separate sort operation.  Return:
+** (or GROUP BY) without requiring a separate sort operation.  Return N:
 ** 
-**    0:  ORDER BY is not satisfied.  Sorting required
-**    1:  ORDER BY is satisfied.      Omit sorting
-**   -1:  Unknown at this time
+**   N>0:   N terms of the ORDER BY clause are satisfied
+**   N==0:  No terms of the ORDER BY clause are satisfied
+**   N<0:   Unknown yet how many terms of ORDER BY might be satisfied.   
 **
 ** Note that processing for WHERE_GROUPBY and WHERE_DISTINCTBY is not as
 ** strict.  With GROUP BY and DISTINCT the only requirement is that
 ** equivalent rows appear immediately adjacent to one another.  GROUP BY
-** and DISTINT do not require rows to appear in any particular order as long
+** and DISTINCT do not require rows to appear in any particular order as long
 ** as equivelent rows are grouped together.  Thus for GROUP BY and DISTINCT
 ** the pOrderBy terms can be matched in any order.  With ORDER BY, the 
 ** pOrderBy terms must be matched in strict left-to-right order.
 */
-static int wherePathSatisfiesOrderBy(
+static i8 wherePathSatisfiesOrderBy(
   WhereInfo *pWInfo,    /* The WHERE clause */
   ExprList *pOrderBy,   /* ORDER BY or GROUP BY or DISTINCT clause to check */
   WherePath *pPath,     /* The WherePath to check */
@@ -114131,14 +116073,6 @@ static int wherePathSatisfiesOrderBy(
   */
 
   assert( pOrderBy!=0 );
-
-  /* Sortability of virtual tables is determined by the xBestIndex method
-  ** of the virtual table itself */
-  if( pLast->wsFlags & WHERE_VIRTUALTABLE ){
-    testcase( nLoop>0 );  /* True when outer loops are one-row and match 
-                          ** no ORDER BY terms */
-    return pLast->u.vtab.isOrdered;
-  }
   if( nLoop && OptimizationDisabled(db, SQLITE_OrderByIdxJoin) ) return 0;
 
   nOrderBy = pOrderBy->nExpr;
@@ -114151,7 +116085,10 @@ static int wherePathSatisfiesOrderBy(
   for(iLoop=0; isOrderDistinct && obSat<obDone && iLoop<=nLoop; iLoop++){
     if( iLoop>0 ) ready |= pLoop->maskSelf;
     pLoop = iLoop<nLoop ? pPath->aLoop[iLoop] : pLast;
-    assert( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 );
+    if( pLoop->wsFlags & WHERE_VIRTUALTABLE ){
+      if( pLoop->u.vtab.isOrdered ) obSat = obDone;
+      break;
+    }
     iCur = pWInfo->pTabList->a[pLoop->iTab].iCursor;
 
     /* Mark off any ORDER BY term X that is a column in the table of
@@ -114192,7 +116129,7 @@ static int wherePathSatisfiesOrderBy(
         nColumn = pIndex->nColumn;
         assert( nColumn==nKeyCol+1 || !HasRowid(pIndex->pTable) );
         assert( pIndex->aiColumn[nColumn-1]==(-1) || !HasRowid(pIndex->pTable));
-        isOrderDistinct = pIndex->onError!=OE_None;
+        isOrderDistinct = IsUniqueIndex(pIndex);
       }
 
       /* Loop through all columns of the index and deal with the ones
@@ -114239,7 +116176,7 @@ static int wherePathSatisfiesOrderBy(
         }
 
         /* Find the ORDER BY term that corresponds to the j-th column
-        ** of the index and and mark that ORDER BY term off 
+        ** of the index and mark that ORDER BY term off 
         */
         bOnce = 1;
         isMatch = 0;
@@ -114260,23 +116197,23 @@ static int wherePathSatisfiesOrderBy(
           isMatch = 1;
           break;
         }
+        if( isMatch && (pWInfo->wctrlFlags & WHERE_GROUPBY)==0 ){
+          /* Make sure the sort order is compatible in an ORDER BY clause.
+          ** Sort order is irrelevant for a GROUP BY clause. */
+          if( revSet ){
+            if( (rev ^ revIdx)!=pOrderBy->a[i].sortOrder ) isMatch = 0;
+          }else{
+            rev = revIdx ^ pOrderBy->a[i].sortOrder;
+            if( rev ) *pRevMask |= MASKBIT(iLoop);
+            revSet = 1;
+          }
+        }
         if( isMatch ){
           if( iColumn<0 ){
             testcase( distinctColumns==0 );
             distinctColumns = 1;
           }
           obSat |= MASKBIT(i);
-          if( (pWInfo->wctrlFlags & WHERE_GROUPBY)==0 ){
-            /* Make sure the sort order is compatible in an ORDER BY clause.
-            ** Sort order is irrelevant for a GROUP BY clause. */
-            if( revSet ){
-              if( (rev ^ revIdx)!=pOrderBy->a[i].sortOrder ) return 0;
-            }else{
-              rev = revIdx ^ pOrderBy->a[i].sortOrder;
-              if( rev ) *pRevMask |= MASKBIT(iLoop);
-              revSet = 1;
-            }
-          }
         }else{
           /* No match found */
           if( j==0 || j<nKeyCol ){
@@ -114308,11 +116245,47 @@ static int wherePathSatisfiesOrderBy(
       }
     }
   } /* End the loop over all WhereLoops from outer-most down to inner-most */
-  if( obSat==obDone ) return 1;
-  if( !isOrderDistinct ) return 0;
+  if( obSat==obDone ) return (i8)nOrderBy;
+  if( !isOrderDistinct ){
+    for(i=nOrderBy-1; i>0; i--){
+      Bitmask m = MASKBIT(i) - 1;
+      if( (obSat&m)==m ) return i;
+    }
+    return 0;
+  }
   return -1;
 }
 
+
+/*
+** If the WHERE_GROUPBY flag is set in the mask passed to sqlite3WhereBegin(),
+** the planner assumes that the specified pOrderBy list is actually a GROUP
+** BY clause - and so any order that groups rows as required satisfies the
+** request.
+**
+** Normally, in this case it is not possible for the caller to determine
+** whether or not the rows are really being delivered in sorted order, or
+** just in some other order that provides the required grouping. However,
+** if the WHERE_SORTBYGROUP flag is also passed to sqlite3WhereBegin(), then
+** this function may be called on the returned WhereInfo object. It returns
+** true if the rows really will be sorted in the specified order, or false
+** otherwise.
+**
+** For example, assuming:
+**
+**   CREATE INDEX i1 ON t1(x, Y);
+**
+** then
+**
+**   SELECT * FROM t1 GROUP BY x,y ORDER BY x,y;   -- IsSorted()==1
+**   SELECT * FROM t1 GROUP BY y,x ORDER BY y,x;   -- IsSorted()==0
+*/
+SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo *pWInfo){
+  assert( pWInfo->wctrlFlags & WHERE_GROUPBY );
+  assert( pWInfo->wctrlFlags & WHERE_SORTBYGROUP );
+  return pWInfo->sorted;
+}
+
 #ifdef WHERETRACE_ENABLED
 /* For debugging use only: */
 static const char *wherePathName(WherePath *pPath, int nLoop, WhereLoop *pLast){
@@ -114325,6 +116298,44 @@ static const char *wherePathName(WherePath *pPath, int nLoop, WhereLoop *pLast){
 }
 #endif
 
+/*
+** Return the cost of sorting nRow rows, assuming that the keys have 
+** nOrderby columns and that the first nSorted columns are already in
+** order.
+*/
+static LogEst whereSortingCost(
+  WhereInfo *pWInfo,
+  LogEst nRow,
+  int nOrderBy,
+  int nSorted
+){
+  /* TUNING: Estimated cost of a full external sort, where N is 
+  ** the number of rows to sort is:
+  **
+  **   cost = (3.0 * N * log(N)).
+  ** 
+  ** Or, if the order-by clause has X terms but only the last Y 
+  ** terms are out of order, then block-sorting will reduce the 
+  ** sorting cost to:
+  **
+  **   cost = (3.0 * N * log(N)) * (Y/X)
+  **
+  ** The (Y/X) term is implemented using stack variable rScale
+  ** below.  */
+  LogEst rScale, rSortCost;
+  assert( nOrderBy>0 && 66==sqlite3LogEst(100) );
+  rScale = sqlite3LogEst((nOrderBy-nSorted)*100/nOrderBy) - 66;
+  rSortCost = nRow + estLog(nRow) + rScale + 16;
+
+  /* TUNING: The cost of implementing DISTINCT using a B-TREE is
+  ** similar but with a larger constant of proportionality. 
+  ** Multiply by an additional factor of 3.0.  */
+  if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){
+    rSortCost += 16;
+  }
+
+  return rSortCost;
+}
 
 /*
 ** Given the list of WhereLoop objects at pWInfo->pLoops, this routine
@@ -114346,11 +116357,9 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
   int iLoop;                /* Loop counter over the terms of the join */
   int ii, jj;               /* Loop counters */
   int mxI = 0;              /* Index of next entry to replace */
-  LogEst rCost;             /* Cost of a path */
-  LogEst nOut;              /* Number of outputs */
+  int nOrderBy;             /* Number of ORDER BY clause terms */
   LogEst mxCost = 0;        /* Maximum cost of a set of paths */
-  LogEst mxOut = 0;         /* Maximum nOut value on the set of paths */
-  LogEst rSortCost;         /* Cost to do a sort */
+  LogEst mxUnsorted = 0;    /* Maximum unsorted cost of a set of path */
   int nTo, nFrom;           /* Number of valid entries in aTo[] and aFrom[] */
   WherePath *aFrom;         /* All nFrom paths at the previous level */
   WherePath *aTo;           /* The nTo best paths at the current level */
@@ -114358,7 +116367,9 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
   WherePath *pTo;           /* An element of aTo[] that we are working on */
   WhereLoop *pWLoop;        /* One of the WhereLoop objects */
   WhereLoop **pX;           /* Used to divy up the pSpace memory */
+  LogEst *aSortCost = 0;    /* Sorting and partial sorting costs */
   char *pSpace;             /* Temporary memory used by this routine */
+  int nSpace;               /* Bytes of space allocated at pSpace */
 
   pParse = pWInfo->pParse;
   db = pParse->db;
@@ -114366,13 +116377,25 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
   /* TUNING: For simple queries, only the best path is tracked.
   ** For 2-way joins, the 5 best paths are followed.
   ** For joins of 3 or more tables, track the 10 best paths */
-  mxChoice = (nLoop==1) ? 1 : (nLoop==2 ? 5 : 10);
+  mxChoice = (nLoop<=1) ? 1 : (nLoop==2 ? 5 : 10);
   assert( nLoop<=pWInfo->pTabList->nSrc );
-  WHERETRACE(0x002, ("---- begin solver\n"));
+  WHERETRACE(0x002, ("---- begin solver.  (nRowEst=%d)\n", nRowEst));
+
+  /* If nRowEst is zero and there is an ORDER BY clause, ignore it. In this
+  ** case the purpose of this call is to estimate the number of rows returned
+  ** by the overall query. Once this estimate has been obtained, the caller
+  ** will invoke this function a second time, passing the estimate as the
+  ** nRowEst parameter.  */
+  if( pWInfo->pOrderBy==0 || nRowEst==0 ){
+    nOrderBy = 0;
+  }else{
+    nOrderBy = pWInfo->pOrderBy->nExpr;
+  }
 
-  /* Allocate and initialize space for aTo and aFrom */
-  ii = (sizeof(WherePath)+sizeof(WhereLoop*)*nLoop)*mxChoice*2;
-  pSpace = sqlite3DbMallocRaw(db, ii);
+  /* Allocate and initialize space for aTo, aFrom and aSortCost[] */
+  nSpace = (sizeof(WherePath)+sizeof(WhereLoop*)*nLoop)*mxChoice*2;
+  nSpace += sizeof(LogEst) * nOrderBy;
+  pSpace = sqlite3DbMallocRaw(db, nSpace);
   if( pSpace==0 ) return SQLITE_NOMEM;
   aTo = (WherePath*)pSpace;
   aFrom = aTo+mxChoice;
@@ -114381,6 +116404,18 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
   for(ii=mxChoice*2, pFrom=aTo; ii>0; ii--, pFrom++, pX += nLoop){
     pFrom->aLoop = pX;
   }
+  if( nOrderBy ){
+    /* If there is an ORDER BY clause and it is not being ignored, set up
+    ** space for the aSortCost[] array. Each element of the aSortCost array
+    ** is either zero - meaning it has not yet been initialized - or the
+    ** cost of sorting nRowEst rows of data where the first X terms of
+    ** the ORDER BY clause are already in order, where X is the array 
+    ** index.  */
+    aSortCost = (LogEst*)pX;
+    memset(aSortCost, 0, sizeof(LogEst) * nOrderBy);
+  }
+  assert( aSortCost==0 || &pSpace[nSpace]==(char*)&aSortCost[nOrderBy] );
+  assert( aSortCost!=0 || &pSpace[nSpace]==(char*)pX );
 
   /* Seed the search with a single WherePath containing zero WhereLoops.
   **
@@ -114389,19 +116424,15 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
   ** rows, then do not use the automatic index. */
   aFrom[0].nRow = MIN(pParse->nQueryLoop, 46);  assert( 46==sqlite3LogEst(25) );
   nFrom = 1;
-
-  /* Precompute the cost of sorting the final result set, if the caller
-  ** to sqlite3WhereBegin() was concerned about sorting */
-  rSortCost = 0;
-  if( pWInfo->pOrderBy==0 || nRowEst==0 ){
-    aFrom[0].isOrderedValid = 1;
-  }else{
-    /* TUNING: Estimated cost of sorting is 48*N*log2(N) where N is the
-    ** number of output rows. The 48 is the expected size of a row to sort. 
-    ** FIXME:  compute a better estimate of the 48 multiplier based on the
-    ** result set expressions. */
-    rSortCost = nRowEst + estLog(nRowEst);
-    WHERETRACE(0x002,("---- sort cost=%-3d\n", rSortCost));
+  assert( aFrom[0].isOrdered==0 );
+  if( nOrderBy ){
+    /* If nLoop is zero, then there are no FROM terms in the query. Since
+    ** in this case the query may return a maximum of one row, the results
+    ** are already in the requested order. Set isOrdered to nOrderBy to
+    ** indicate this. Or, if nLoop is greater than zero, set isOrdered to
+    ** -1, indicating that the result set may or may not be ordered, 
+    ** depending on the loops added to the current plan.  */
+    aFrom[0].isOrdered = nLoop>0 ? -1 : nOrderBy;
   }
 
   /* Compute successively longer WherePaths using the previous generation
@@ -114411,60 +116442,82 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
     nTo = 0;
     for(ii=0, pFrom=aFrom; ii<nFrom; ii++, pFrom++){
       for(pWLoop=pWInfo->pLoops; pWLoop; pWLoop=pWLoop->pNextLoop){
-        Bitmask maskNew;
-        Bitmask revMask = 0;
-        u8 isOrderedValid = pFrom->isOrderedValid;
-        u8 isOrdered = pFrom->isOrdered;
+        LogEst nOut;                      /* Rows visited by (pFrom+pWLoop) */
+        LogEst rCost;                     /* Cost of path (pFrom+pWLoop) */
+        LogEst rUnsorted;                 /* Unsorted cost of (pFrom+pWLoop) */
+        i8 isOrdered = pFrom->isOrdered;  /* isOrdered for (pFrom+pWLoop) */
+        Bitmask maskNew;                  /* Mask of src visited by (..) */
+        Bitmask revMask = 0;              /* Mask of rev-order loops for (..) */
+
         if( (pWLoop->prereq & ~pFrom->maskLoop)!=0 ) continue;
         if( (pWLoop->maskSelf & pFrom->maskLoop)!=0 ) continue;
         /* At this point, pWLoop is a candidate to be the next loop. 
         ** Compute its cost */
-        rCost = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow);
-        rCost = sqlite3LogEstAdd(rCost, pFrom->rCost);
+        rUnsorted = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow);
+        rUnsorted = sqlite3LogEstAdd(rUnsorted, pFrom->rUnsorted);
         nOut = pFrom->nRow + pWLoop->nOut;
         maskNew = pFrom->maskLoop | pWLoop->maskSelf;
-        if( !isOrderedValid ){
-          switch( wherePathSatisfiesOrderBy(pWInfo,
+        if( isOrdered<0 ){
+          isOrdered = wherePathSatisfiesOrderBy(pWInfo,
                        pWInfo->pOrderBy, pFrom, pWInfo->wctrlFlags,
-                       iLoop, pWLoop, &revMask) ){
-            case 1:  /* Yes.  pFrom+pWLoop does satisfy the ORDER BY clause */
-              isOrdered = 1;
-              isOrderedValid = 1;
-              break;
-            case 0:  /* No.  pFrom+pWLoop will require a separate sort */
-              isOrdered = 0;
-              isOrderedValid = 1;
-              rCost = sqlite3LogEstAdd(rCost, rSortCost);
-              break;
-            default: /* Cannot tell yet.  Try again on the next iteration */
-              break;
-          }
+                       iLoop, pWLoop, &revMask);
         }else{
           revMask = pFrom->revLoop;
         }
-        /* Check to see if pWLoop should be added to the mxChoice best so far */
+        if( isOrdered>=0 && isOrdered<nOrderBy ){
+          if( aSortCost[isOrdered]==0 ){
+            aSortCost[isOrdered] = whereSortingCost(
+                pWInfo, nRowEst, nOrderBy, isOrdered
+            );
+          }
+          rCost = sqlite3LogEstAdd(rUnsorted, aSortCost[isOrdered]);
+
+          WHERETRACE(0x002,
+              ("---- sort cost=%-3d (%d/%d) increases cost %3d to %-3d\n",
+               aSortCost[isOrdered], (nOrderBy-isOrdered), nOrderBy, 
+               rUnsorted, rCost));
+        }else{
+          rCost = rUnsorted;
+        }
+
+        /* Check to see if pWLoop should be added to the set of
+        ** mxChoice best-so-far paths.
+        **
+        ** First look for an existing path among best-so-far paths
+        ** that covers the same set of loops and has the same isOrdered
+        ** setting as the current path candidate.
+        **
+        ** The term "((pTo->isOrdered^isOrdered)&0x80)==0" is equivalent
+        ** to (pTo->isOrdered==(-1))==(isOrdered==(-1))" for the range
+        ** of legal values for isOrdered, -1..64.
+        */
         for(jj=0, pTo=aTo; jj<nTo; jj++, pTo++){
           if( pTo->maskLoop==maskNew
-           && pTo->isOrderedValid==isOrderedValid
-           && ((pTo->rCost<=rCost && pTo->nRow<=nOut) ||
-                (pTo->rCost>=rCost && pTo->nRow>=nOut))
+           && ((pTo->isOrdered^isOrdered)&0x80)==0
           ){
             testcase( jj==nTo-1 );
             break;
           }
         }
         if( jj>=nTo ){
-          if( nTo>=mxChoice && rCost>=mxCost ){
+          /* None of the existing best-so-far paths match the candidate. */
+          if( nTo>=mxChoice
+           && (rCost>mxCost || (rCost==mxCost && rUnsorted>=mxUnsorted))
+          ){
+            /* The current candidate is no better than any of the mxChoice
+            ** paths currently in the best-so-far buffer.  So discard
+            ** this candidate as not viable. */
 #ifdef WHERETRACE_ENABLED /* 0x4 */
             if( sqlite3WhereTrace&0x4 ){
               sqlite3DebugPrintf("Skip   %s cost=%-3d,%3d order=%c\n",
                   wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
-                  isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?');
+                  isOrdered>=0 ? isOrdered+'0' : '?');
             }
 #endif
             continue;
           }
-          /* Add a new Path to the aTo[] set */
+          /* If we reach this points it means that the new candidate path
+          ** needs to be added to the set of best-so-far paths. */
           if( nTo<mxChoice ){
             /* Increase the size of the aTo set by one */
             jj = nTo++;
@@ -114477,36 +116530,42 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
           if( sqlite3WhereTrace&0x4 ){
             sqlite3DebugPrintf("New    %s cost=%-3d,%3d order=%c\n",
                 wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
-                isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?');
+                isOrdered>=0 ? isOrdered+'0' : '?');
           }
 #endif
         }else{
-          if( pTo->rCost<=rCost && pTo->nRow<=nOut ){
+          /* Control reaches here if best-so-far path pTo=aTo[jj] covers the
+          ** same set of loops and has the sam isOrdered setting as the
+          ** candidate path.  Check to see if the candidate should replace
+          ** pTo or if the candidate should be skipped */
+          if( pTo->rCost<rCost || (pTo->rCost==rCost && pTo->nRow<=nOut) ){
 #ifdef WHERETRACE_ENABLED /* 0x4 */
             if( sqlite3WhereTrace&0x4 ){
               sqlite3DebugPrintf(
                   "Skip   %s cost=%-3d,%3d order=%c",
                   wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
-                  isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?');
+                  isOrdered>=0 ? isOrdered+'0' : '?');
               sqlite3DebugPrintf("   vs %s cost=%-3d,%d order=%c\n",
                   wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow,
-                  pTo->isOrderedValid ? (pTo->isOrdered ? 'Y' : 'N') : '?');
+                  pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?');
             }
 #endif
+            /* Discard the candidate path from further consideration */
             testcase( pTo->rCost==rCost );
             continue;
           }
           testcase( pTo->rCost==rCost+1 );
-          /* A new and better score for a previously created equivalent path */
+          /* Control reaches here if the candidate path is better than the
+          ** pTo path.  Replace pTo with the candidate. */
 #ifdef WHERETRACE_ENABLED /* 0x4 */
           if( sqlite3WhereTrace&0x4 ){
             sqlite3DebugPrintf(
                 "Update %s cost=%-3d,%3d order=%c",
                 wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
-                isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?');
+                isOrdered>=0 ? isOrdered+'0' : '?');
             sqlite3DebugPrintf("  was %s cost=%-3d,%3d order=%c\n",
                 wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow,
-                pTo->isOrderedValid ? (pTo->isOrdered ? 'Y' : 'N') : '?');
+                pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?');
           }
 #endif
         }
@@ -114515,18 +116574,20 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
         pTo->revLoop = revMask;
         pTo->nRow = nOut;
         pTo->rCost = rCost;
-        pTo->isOrderedValid = isOrderedValid;
+        pTo->rUnsorted = rUnsorted;
         pTo->isOrdered = isOrdered;
         memcpy(pTo->aLoop, pFrom->aLoop, sizeof(WhereLoop*)*iLoop);
         pTo->aLoop[iLoop] = pWLoop;
         if( nTo>=mxChoice ){
           mxI = 0;
           mxCost = aTo[0].rCost;
-          mxOut = aTo[0].nRow;
+          mxUnsorted = aTo[0].nRow;
           for(jj=1, pTo=&aTo[1]; jj<mxChoice; jj++, pTo++){
-            if( pTo->rCost>mxCost || (pTo->rCost==mxCost && pTo->nRow>mxOut) ){
+            if( pTo->rCost>mxCost 
+             || (pTo->rCost==mxCost && pTo->rUnsorted>mxUnsorted) 
+            ){
               mxCost = pTo->rCost;
-              mxOut = pTo->nRow;
+              mxUnsorted = pTo->rUnsorted;
               mxI = jj;
             }
           }
@@ -114540,8 +116601,8 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
       for(ii=0, pTo=aTo; ii<nTo; ii++, pTo++){
         sqlite3DebugPrintf(" %s cost=%-3d nrow=%-3d order=%c",
            wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow,
-           pTo->isOrderedValid ? (pTo->isOrdered ? 'Y' : 'N') : '?');
-        if( pTo->isOrderedValid && pTo->isOrdered ){
+           pTo->isOrdered>=0 ? (pTo->isOrdered+'0') : '?');
+        if( pTo->isOrdered>0 ){
           sqlite3DebugPrintf(" rev=0x%llx\n", pTo->revLoop);
         }else{
           sqlite3DebugPrintf("\n");
@@ -114584,16 +116645,33 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){
     Bitmask notUsed;
     int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pResultSet, pFrom,
                  WHERE_DISTINCTBY, nLoop-1, pFrom->aLoop[nLoop-1], &notUsed);
-    if( rc==1 ) pWInfo->eDistinct = WHERE_DISTINCT_ORDERED;
+    if( rc==pWInfo->pResultSet->nExpr ){
+      pWInfo->eDistinct = WHERE_DISTINCT_ORDERED;
+    }
   }
-  if( pFrom->isOrdered ){
+  if( pWInfo->pOrderBy ){
     if( pWInfo->wctrlFlags & WHERE_DISTINCTBY ){
-      pWInfo->eDistinct = WHERE_DISTINCT_ORDERED;
+      if( pFrom->isOrdered==pWInfo->pOrderBy->nExpr ){
+        pWInfo->eDistinct = WHERE_DISTINCT_ORDERED;
+      }
     }else{
-      pWInfo->bOBSat = 1;
+      pWInfo->nOBSat = pFrom->isOrdered;
+      if( pWInfo->nOBSat<0 ) pWInfo->nOBSat = 0;
       pWInfo->revMask = pFrom->revLoop;
     }
+    if( (pWInfo->wctrlFlags & WHERE_SORTBYGROUP)
+        && pWInfo->nOBSat==pWInfo->pOrderBy->nExpr
+    ){
+      Bitmask notUsed = 0;
+      int nOrder = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, 
+          pFrom, 0, nLoop-1, pFrom->aLoop[nLoop-1], &notUsed
+      );
+      assert( pWInfo->sorted==0 );
+      pWInfo->sorted = (nOrder==pWInfo->pOrderBy->nExpr);
+    }
   }
+
+
   pWInfo->nRowOut = pFrom->nRow;
 
   /* Free temporary memory and return success */
@@ -114647,7 +116725,7 @@ static int whereShortCut(WhereLoopBuilder *pBuilder){
     for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
       assert( pLoop->aLTermSpace==pLoop->aLTerm );
       assert( ArraySize(pLoop->aLTermSpace)==4 );
-      if( pIdx->onError==OE_None 
+      if( !IsUniqueIndex(pIdx)
        || pIdx->pPartIdxWhere!=0 
        || pIdx->nKeyCol>ArraySize(pLoop->aLTermSpace) 
       ) continue;
@@ -114675,7 +116753,7 @@ static int whereShortCut(WhereLoopBuilder *pBuilder){
     pLoop->maskSelf = getMask(&pWInfo->sMaskSet, iCur);
     pWInfo->a[0].iTabCur = iCur;
     pWInfo->nRowOut = 1;
-    if( pWInfo->pOrderBy ) pWInfo->bOBSat =  1;
+    if( pWInfo->pOrderBy ) pWInfo->nOBSat =  pWInfo->pOrderBy->nExpr;
     if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){
       pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE;
     }
@@ -114779,7 +116857,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
   Parse *pParse,        /* The parser context */
   SrcList *pTabList,    /* FROM clause: A list of all tables to be scanned */
   Expr *pWhere,         /* The WHERE clause */
-  ExprList *pOrderBy,   /* An ORDER BY clause, or NULL */
+  ExprList *pOrderBy,   /* An ORDER BY (or GROUP BY) clause, or NULL */
   ExprList *pResultSet, /* Result set of the query */
   u16 wctrlFlags,       /* One of the WHERE_* flags defined in sqliteInt.h */
   int iIdxCur           /* If WHERE_ONETABLE_ONLY is set, index cursor number */
@@ -114801,6 +116879,10 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
   /* Variable initialization */
   db = pParse->db;
   memset(&sWLB, 0, sizeof(sWLB));
+
+  /* An ORDER/GROUP BY clause of more than 63 terms cannot be optimized */
+  testcase( pOrderBy && pOrderBy->nExpr==BMS-1 );
+  if( pOrderBy && pOrderBy->nExpr>=BMS ) pOrderBy = 0;
   sWLB.pOrderBy = pOrderBy;
 
   /* Disable the DISTINCT optimization if SQLITE_DistinctOpt is set via
@@ -114845,7 +116927,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
   pWInfo->pTabList = pTabList;
   pWInfo->pOrderBy = pOrderBy;
   pWInfo->pResultSet = pResultSet;
-  pWInfo->iBreak = sqlite3VdbeMakeLabel(v);
+  pWInfo->iBreak = pWInfo->iContinue = sqlite3VdbeMakeLabel(v);
   pWInfo->wctrlFlags = wctrlFlags;
   pWInfo->savedNQueryLoop = pParse->nQueryLoop;
   pMaskSet = &pWInfo->sMaskSet;
@@ -114879,7 +116961,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
   /* Special case: No FROM clause
   */
   if( nTabList==0 ){
-    if( pOrderBy ) pWInfo->bOBSat = 1;
+    if( pOrderBy ) pWInfo->nOBSat = pOrderBy->nExpr;
     if( wctrlFlags & WHERE_WANT_DISTINCT ){
       pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE;
     }
@@ -114990,8 +117072,8 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
   if( sqlite3WhereTrace ){
     int ii;
     sqlite3DebugPrintf("---- Solution nRow=%d", pWInfo->nRowOut);
-    if( pWInfo->bOBSat ){
-      sqlite3DebugPrintf(" ORDERBY=0x%llx", pWInfo->revMask);
+    if( pWInfo->nOBSat>0 ){
+      sqlite3DebugPrintf(" ORDERBY=%d,0x%llx", pWInfo->nOBSat, pWInfo->revMask);
     }
     switch( pWInfo->eDistinct ){
       case WHERE_DISTINCT_UNIQUE: {
@@ -115114,7 +117196,14 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
       int op = OP_OpenRead;
       /* iIdxCur is always set if to a positive value if ONEPASS is possible */
       assert( iIdxCur!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 );
-      if( pWInfo->okOnePass ){
+      if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIx)
+       && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0
+      ){
+        /* This is one term of an OR-optimization using the PRIMARY KEY of a
+        ** WITHOUT ROWID table.  No need for a separate index */
+        iIndexCur = pLevel->iTabCur;
+        op = 0;
+      }else if( pWInfo->okOnePass ){
         Index *pJ = pTabItem->pTab->pIndex;
         iIndexCur = iIdxCur;
         assert( wctrlFlags & WHERE_ONEPASS_DESIRED );
@@ -115126,15 +117215,18 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
         pWInfo->aiCurOnePass[1] = iIndexCur;
       }else if( iIdxCur && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0 ){
         iIndexCur = iIdxCur;
+        if( wctrlFlags & WHERE_REOPEN_IDX ) op = OP_ReopenIdx;
       }else{
         iIndexCur = pParse->nTab++;
       }
       pLevel->iIdxCur = iIndexCur;
       assert( pIx->pSchema==pTab->pSchema );
       assert( iIndexCur>=0 );
-      sqlite3VdbeAddOp3(v, op, iIndexCur, pIx->tnum, iDb);
-      sqlite3VdbeSetP4KeyInfo(pParse, pIx);
-      VdbeComment((v, "%s", pIx->zName));
+      if( op ){
+        sqlite3VdbeAddOp3(v, op, iIndexCur, pIx->tnum, iDb);
+        sqlite3VdbeSetP4KeyInfo(pParse, pIx);
+        VdbeComment((v, "%s", pIx->zName));
+      }
     }
     if( iDb>=0 ) sqlite3CodeVerifySchema(pParse, iDb);
     notReady &= ~getMask(&pWInfo->sMaskSet, pTabItem->iCursor);
@@ -118221,6 +120313,33 @@ static void yy_reduce(
       */
       yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, &sqlite3IntTokens[yymsp[-3].minor.yy328]);
       sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy346.pExpr);
+    }else if( yymsp[-1].minor.yy14->nExpr==1 ){
+      /* Expressions of the form:
+      **
+      **      expr1 IN (?1)
+      **      expr1 NOT IN (?2)
+      **
+      ** with exactly one value on the RHS can be simplified to something
+      ** like this:
+      **
+      **      expr1 == ?1
+      **      expr1 <> ?2
+      **
+      ** But, the RHS of the == or <> is marked with the EP_Generic flag
+      ** so that it may not contribute to the computation of comparison
+      ** affinity or the collating sequence to use for comparison.  Otherwise,
+      ** the semantics would be subtly different from IN or NOT IN.
+      */
+      Expr *pRHS = yymsp[-1].minor.yy14->a[0].pExpr;
+      yymsp[-1].minor.yy14->a[0].pExpr = 0;
+      sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy14);
+      /* pRHS cannot be NULL because a malloc error would have been detected
+      ** before now and control would have never reached this point */
+      if( ALWAYS(pRHS) ){
+        pRHS->flags &= ~EP_Collate;
+        pRHS->flags |= EP_Generic;
+      }
+      yygotominor.yy346.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy328 ? TK_NE : TK_EQ, yymsp[-4].minor.yy346.pExpr, pRHS, 0);
     }else{
       yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy346.pExpr, 0, 0);
       if( yygotominor.yy346.pExpr ){
@@ -119421,6 +121540,12 @@ SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *z, int *tokenType){
       testcase( z[0]=='6' );  testcase( z[0]=='7' );  testcase( z[0]=='8' );
       testcase( z[0]=='9' );
       *tokenType = TK_INTEGER;
+#ifndef SQLITE_OMIT_HEX_INTEGER
+      if( z[0]=='0' && (z[1]=='x' || z[1]=='X') && sqlite3Isxdigit(z[2]) ){
+        for(i=3; sqlite3Isxdigit(z[i]); i++){}
+        return i;
+      }
+#endif
       for(i=0; sqlite3Isdigit(z[i]); i++){}
 #ifndef SQLITE_OMIT_FLOATING_POINT
       if( z[i]=='.' ){
@@ -120841,6 +122966,7 @@ static void disconnectAllVtab(sqlite3 *db){
       }
     }
   }
+  sqlite3VtabUnlockList(db);
   sqlite3BtreeLeaveAll(db);
 #else
   UNUSED_PARAMETER(db);
@@ -120867,6 +122993,8 @@ static int connectionIsBusy(sqlite3 *db){
 */
 static int sqlite3Close(sqlite3 *db, int forceZombie){
   if( !db ){
+    /* EVIDENCE-OF: R-63257-11740 Calling sqlite3_close() or
+    ** sqlite3_close_v2() with a NULL pointer argument is a harmless no-op. */
     return SQLITE_OK;
   }
   if( !sqlite3SafetyCheckSickOrOk(db) ){
@@ -121096,7 +123224,7 @@ SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3 *db, int tripCode){
 ** Return a static string containing the name corresponding to the error code
 ** specified in the argument.
 */
-#if defined(SQLITE_TEST)
+#if (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) || defined(SQLITE_TEST)
 SQLITE_PRIVATE const char *sqlite3ErrName(int rc){
   const char *zName = 0;
   int i, origRc = rc;
@@ -121131,7 +123259,6 @@ SQLITE_PRIVATE const char *sqlite3ErrName(int rc){
       case SQLITE_IOERR_UNLOCK:       zName = "SQLITE_IOERR_UNLOCK";      break;
       case SQLITE_IOERR_RDLOCK:       zName = "SQLITE_IOERR_RDLOCK";      break;
       case SQLITE_IOERR_DELETE:       zName = "SQLITE_IOERR_DELETE";      break;
-      case SQLITE_IOERR_BLOCKED:      zName = "SQLITE_IOERR_BLOCKED";     break;
       case SQLITE_IOERR_NOMEM:        zName = "SQLITE_IOERR_NOMEM";       break;
       case SQLITE_IOERR_ACCESS:       zName = "SQLITE_IOERR_ACCESS";      break;
       case SQLITE_IOERR_CHECKRESERVEDLOCK:
@@ -122116,7 +124243,7 @@ static const int aHardLimit[] = {
   SQLITE_MAX_FUNCTION_ARG,
   SQLITE_MAX_ATTACHED,
   SQLITE_MAX_LIKE_PATTERN_LENGTH,
-  SQLITE_MAX_VARIABLE_NUMBER,
+  SQLITE_MAX_VARIABLE_NUMBER,      /* IMP: R-38091-32352 */
   SQLITE_MAX_TRIGGER_DEPTH,
 };
 
@@ -122141,8 +124268,8 @@ static const int aHardLimit[] = {
 #if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>1000
 # error SQLITE_MAX_FUNCTION_ARG must be between 0 and 1000
 #endif
-#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>62
-# error SQLITE_MAX_ATTACHED must be between 0 and 62
+#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>125
+# error SQLITE_MAX_ATTACHED must be between 0 and 125
 #endif
 #if SQLITE_MAX_LIKE_PATTERN_LENGTH<1
 # error SQLITE_MAX_LIKE_PATTERN_LENGTH must be at least 1
@@ -123155,6 +125282,28 @@ SQLITE_API int sqlite3_test_control(int op, ...){
     }
 
     /*
+    **  sqlite3_test_control(FAULT_INSTALL, xCallback)
+    **
+    ** Arrange to invoke xCallback() whenever sqlite3FaultSim() is called,
+    ** if xCallback is not NULL.
+    **
+    ** As a test of the fault simulator mechanism itself, sqlite3FaultSim(0)
+    ** is called immediately after installing the new callback and the return
+    ** value from sqlite3FaultSim(0) becomes the return from
+    ** sqlite3_test_control().
+    */
+    case SQLITE_TESTCTRL_FAULT_INSTALL: {
+      /* MSVC is picky about pulling func ptrs from va lists.
+      ** http://support.microsoft.com/kb/47961
+      ** sqlite3GlobalConfig.xTestCallback = va_arg(ap, int(*)(int));
+      */
+      typedef int(*TESTCALLBACKFUNC_t)(int);
+      sqlite3GlobalConfig.xTestCallback = va_arg(ap, TESTCALLBACKFUNC_t);
+      rc = sqlite3FaultSim(0);
+      break;
+    }
+
+    /*
     **  sqlite3_test_control(BENIGN_MALLOC_HOOKS, xBegin, xEnd)
     **
     ** Register hooks to call to indicate which malloc() failures 
@@ -123245,6 +125394,22 @@ SQLITE_API int sqlite3_test_control(int op, ...){
       break;
     }
 
+    /*
+    **   sqlite3_test_control(SQLITE_TESTCTRL_BYTEORDER);
+    **
+    ** The integer returned reveals the byte-order of the computer on which
+    ** SQLite is running:
+    **
+    **       1     big-endian,    determined at run-time
+    **      10     little-endian, determined at run-time
+    **  432101     big-endian,    determined at compile-time
+    **  123410     little-endian, determined at compile-time
+    */ 
+    case SQLITE_TESTCTRL_BYTEORDER: {
+      rc = SQLITE_BYTEORDER*100 + SQLITE_LITTLEENDIAN*10 + SQLITE_BIGENDIAN;
+      break;
+    }
+
     /*   sqlite3_test_control(SQLITE_TESTCTRL_RESERVE, sqlite3 *db, int N)
     **
     ** Set the nReserve size to N for the main database on the database
@@ -123363,6 +125528,16 @@ SQLITE_API int sqlite3_test_control(int op, ...){
       break;
     }
 
+    /*   sqlite3_test_control(SQLITE_TESTCTRL_ISINIT);
+    **
+    ** Return SQLITE_OK if SQLite has been initialized and SQLITE_ERROR if
+    ** not.
+    */
+    case SQLITE_TESTCTRL_ISINIT: {
+      if( sqlite3GlobalConfig.isInit==0 ) rc = SQLITE_ERROR;
+      break;
+    }
+
   }
   va_end(ap);
 #endif /* SQLITE_OMIT_BUILTIN_TEST */
@@ -123411,7 +125586,7 @@ SQLITE_API sqlite3_int64 sqlite3_uri_int64(
 ){
   const char *z = sqlite3_uri_parameter(zFilename, zParam);
   sqlite3_int64 v;
-  if( z && sqlite3Atoi64(z, &v, sqlite3Strlen30(z), SQLITE_UTF8)==SQLITE_OK ){
+  if( z && sqlite3DecOrHexToI64(z, &v)==SQLITE_OK ){
     bDflt = v;
   }
   return bDflt;
@@ -123447,7 +125622,7 @@ SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName){
 */
 SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName){
   Btree *pBt = sqlite3DbNameToBtree(db, zDbName);
-  return pBt ? sqlite3PagerIsreadonly(sqlite3BtreePager(pBt)) : -1;
+  return pBt ? sqlite3BtreeIsReadonly(pBt) : -1;
 }
 
 /************** End of main.c ************************************************/
@@ -124567,20 +126742,20 @@ struct Fts3Table {
   sqlite3_tokenizer *pTokenizer;  /* tokenizer for inserts and queries */
   char *zContentTbl;              /* content=xxx option, or NULL */
   char *zLanguageid;              /* languageid=xxx option, or NULL */
-  u8 bAutoincrmerge;              /* True if automerge=1 */
+  int nAutoincrmerge;             /* Value configured by 'automerge' */
   u32 nLeafAdd;                   /* Number of leaf blocks added this trans */
 
   /* Precompiled statements used by the implementation. Each of these 
   ** statements is run and reset within a single virtual table API call. 
   */
-  sqlite3_stmt *aStmt[37];
+  sqlite3_stmt *aStmt[40];
 
   char *zReadExprlist;
   char *zWriteExprlist;
 
   int nNodeSize;                  /* Soft limit for node size */
   u8 bFts4;                       /* True for FTS4, false for FTS3 */
-  u8 bHasStat;                    /* True if %_stat table exists */
+  u8 bHasStat;                    /* True if %_stat table exists (2==unknown) */
   u8 bHasDocsize;                 /* True if %_docsize table exists */
   u8 bDescIdx;                    /* True if doclists are in reverse order */
   u8 bIgnoreSavepoint;            /* True to ignore xSavepoint invocations */
@@ -124942,7 +127117,7 @@ SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr);
 SQLITE_PRIVATE int sqlite3Fts3InitTok(sqlite3*, Fts3Hash *);
 
 /* fts3_unicode2.c (functions generated by parsing unicode text files) */
-#ifdef SQLITE_ENABLE_FTS4_UNICODE61
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
 SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int, int);
 SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int);
 SQLITE_PRIVATE int sqlite3FtsUnicodeIsdiacritic(int);
@@ -125995,7 +128170,7 @@ static int fts3InitVtab(
   p->bHasStat = isFts4;
   p->bFts4 = isFts4;
   p->bDescIdx = bDescIdx;
-  p->bAutoincrmerge = 0xff;   /* 0xff means setting unknown */
+  p->nAutoincrmerge = 0xff;   /* 0xff means setting unknown */
   p->zContentTbl = zContent;
   p->zLanguageid = zLanguageid;
   zContent = 0;
@@ -126038,7 +128213,9 @@ static int fts3InitVtab(
     int n = (int)strlen(p->azColumn[iCol]);
     for(i=0; i<nNotindexed; i++){
       char *zNot = azNotindexed[i];
-      if( zNot && 0==sqlite3_strnicmp(p->azColumn[iCol], zNot, n) ){
+      if( zNot && n==(int)strlen(zNot)
+       && 0==sqlite3_strnicmp(p->azColumn[iCol], zNot, n) 
+      ){
         p->abNotindexed[iCol] = 1;
         sqlite3_free(zNot);
         azNotindexed[i] = 0;
@@ -126072,10 +128249,7 @@ static int fts3InitVtab(
   ** addition of a %_stat table so that it can use incremental merge.
   */
   if( !isFts4 && !isCreate ){
-    int rc2 = SQLITE_OK;
-    fts3DbExec(&rc2, db, "SELECT 1 FROM %Q.'%q_stat' WHERE id=2",
-               p->zDb, p->zName);
-    if( rc2==SQLITE_OK ) p->bHasStat = 1;
+    p->bHasStat = 2;
   }
 
   /* Figure out the page-size for the database. This is required in order to
@@ -127967,7 +130141,10 @@ static int fts3SyncMethod(sqlite3_vtab *pVtab){
   Fts3Table *p = (Fts3Table*)pVtab;
   int rc = sqlite3Fts3PendingTermsFlush(p);
 
-  if( rc==SQLITE_OK && p->bAutoincrmerge==1 && p->nLeafAdd>(nMinMerge/16) ){
+  if( rc==SQLITE_OK 
+   && p->nLeafAdd>(nMinMerge/16) 
+   && p->nAutoincrmerge && p->nAutoincrmerge!=0xff
+  ){
     int mxLevel = 0;              /* Maximum relative level value in db */
     int A;                        /* Incr-merge parameter A */
 
@@ -127975,14 +130152,41 @@ static int fts3SyncMethod(sqlite3_vtab *pVtab){
     assert( rc==SQLITE_OK || mxLevel==0 );
     A = p->nLeafAdd * mxLevel;
     A += (A/2);
-    if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, 8);
+    if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, p->nAutoincrmerge);
   }
   sqlite3Fts3SegmentsClose(p);
   return rc;
 }
 
 /*
-** Implementation of xBegin() method. This is a no-op.
+** If it is currently unknown whether or not the FTS table has an %_stat
+** table (if p->bHasStat==2), attempt to determine this (set p->bHasStat
+** to 0 or 1). Return SQLITE_OK if successful, or an SQLite error code
+** if an error occurs.
+*/
+static int fts3SetHasStat(Fts3Table *p){
+  int rc = SQLITE_OK;
+  if( p->bHasStat==2 ){
+    const char *zFmt ="SELECT 1 FROM %Q.sqlite_master WHERE tbl_name='%q_stat'";
+    char *zSql = sqlite3_mprintf(zFmt, p->zDb, p->zName);
+    if( zSql ){
+      sqlite3_stmt *pStmt = 0;
+      rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
+      if( rc==SQLITE_OK ){
+        int bHasStat = (sqlite3_step(pStmt)==SQLITE_ROW);
+        rc = sqlite3_finalize(pStmt);
+        if( rc==SQLITE_OK ) p->bHasStat = bHasStat;
+      }
+      sqlite3_free(zSql);
+    }else{
+      rc = SQLITE_NOMEM;
+    }
+  }
+  return rc;
+}
+
+/*
+** Implementation of xBegin() method. 
 */
 static int fts3BeginMethod(sqlite3_vtab *pVtab){
   Fts3Table *p = (Fts3Table*)pVtab;
@@ -127993,7 +130197,7 @@ static int fts3BeginMethod(sqlite3_vtab *pVtab){
   TESTONLY( p->inTransaction = 1 );
   TESTONLY( p->mxSavepoint = -1; );
   p->nLeafAdd = 0;
-  return SQLITE_OK;
+  return fts3SetHasStat(p);
 }
 
 /*
@@ -128242,6 +130446,10 @@ static int fts3RenameMethod(
   sqlite3 *db = p->db;            /* Database connection */
   int rc;                         /* Return Code */
 
+  /* At this point it must be known if the %_stat table exists or not.
+  ** So bHasStat may not be 2.  */
+  rc = fts3SetHasStat(p);
+  
   /* As it happens, the pending terms table is always empty here. This is
   ** because an "ALTER TABLE RENAME TABLE" statement inside a transaction 
   ** always opens a savepoint transaction. And the xSavepoint() method 
@@ -128249,7 +130457,9 @@ static int fts3RenameMethod(
   ** PendingTermsFlush() in in case that changes.
   */
   assert( p->nPendingData==0 );
-  rc = sqlite3Fts3PendingTermsFlush(p);
+  if( rc==SQLITE_OK ){
+    rc = sqlite3Fts3PendingTermsFlush(p);
+  }
 
   if( p->zContentTbl==0 ){
     fts3DbExec(&rc, db,
@@ -128377,7 +130587,7 @@ static void hashDestroy(void *p){
 */
 SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule(sqlite3_tokenizer_module const**ppModule);
 SQLITE_PRIVATE void sqlite3Fts3PorterTokenizerModule(sqlite3_tokenizer_module const**ppModule);
-#ifdef SQLITE_ENABLE_FTS4_UNICODE61
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
 SQLITE_PRIVATE void sqlite3Fts3UnicodeTokenizer(sqlite3_tokenizer_module const**ppModule);
 #endif
 #ifdef SQLITE_ENABLE_ICU
@@ -128395,7 +130605,7 @@ SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db){
   Fts3Hash *pHash = 0;
   const sqlite3_tokenizer_module *pSimple = 0;
   const sqlite3_tokenizer_module *pPorter = 0;
-#ifdef SQLITE_ENABLE_FTS4_UNICODE61
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
   const sqlite3_tokenizer_module *pUnicode = 0;
 #endif
 
@@ -128404,7 +130614,7 @@ SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db){
   sqlite3Fts3IcuTokenizerModule(&pIcu);
 #endif
 
-#ifdef SQLITE_ENABLE_FTS4_UNICODE61
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
   sqlite3Fts3UnicodeTokenizer(&pUnicode);
 #endif
 
@@ -128432,7 +130642,7 @@ SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db){
     if( sqlite3Fts3HashInsert(pHash, "simple", 7, (void *)pSimple)
      || sqlite3Fts3HashInsert(pHash, "porter", 7, (void *)pPorter) 
 
-#ifdef SQLITE_ENABLE_FTS4_UNICODE61
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
      || sqlite3Fts3HashInsert(pHash, "unicode61", 10, (void *)pUnicode) 
 #endif
 #ifdef SQLITE_ENABLE_ICU
@@ -131165,40 +133375,23 @@ static int getNextToken(
   int rc;
   sqlite3_tokenizer_cursor *pCursor;
   Fts3Expr *pRet = 0;
-  int nConsumed = 0;
+  int i = 0;
 
-  rc = sqlite3Fts3OpenTokenizer(pTokenizer, pParse->iLangid, z, n, &pCursor);
+  /* Set variable i to the maximum number of bytes of input to tokenize. */
+  for(i=0; i<n; i++){
+    if( sqlite3_fts3_enable_parentheses && (z[i]=='(' || z[i]==')') ) break;
+    if( z[i]=='*' || z[i]=='"' ) break;
+  }
+
+  *pnConsumed = i;
+  rc = sqlite3Fts3OpenTokenizer(pTokenizer, pParse->iLangid, z, i, &pCursor);
   if( rc==SQLITE_OK ){
     const char *zToken;
     int nToken = 0, iStart = 0, iEnd = 0, iPosition = 0;
     int nByte;                               /* total space to allocate */
 
     rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition);
-
-    if( (rc==SQLITE_OK || rc==SQLITE_DONE) && sqlite3_fts3_enable_parentheses ){
-      int i;
-      if( rc==SQLITE_DONE ) iStart = n;
-      for(i=0; i<iStart; i++){
-        if( z[i]=='(' ){
-          pParse->nNest++;
-          rc = fts3ExprParse(pParse, &z[i+1], n-i-1, &pRet, &nConsumed);
-          if( rc==SQLITE_OK && !pRet ){
-            rc = SQLITE_DONE;
-          }
-          nConsumed = (int)(i + 1 + nConsumed);
-          break;
-        }
-
-        if( z[i]==')' ){
-          rc = SQLITE_DONE;
-          pParse->nNest--;
-          nConsumed = i+1;
-          break;
-        }
-      }
-    }
-
-    if( nConsumed==0 && rc==SQLITE_OK ){
+    if( rc==SQLITE_OK ){
       nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken;
       pRet = (Fts3Expr *)fts3MallocZero(nByte);
       if( !pRet ){
@@ -131232,13 +133425,14 @@ static int getNextToken(
         }
 
       }
-      nConsumed = iEnd;
+      *pnConsumed = iEnd;
+    }else if( i && rc==SQLITE_DONE ){
+      rc = SQLITE_OK;
     }
 
     pModule->xClose(pCursor);
   }
   
-  *pnConsumed = nConsumed;
   *ppExpr = pRet;
   return rc;
 }
@@ -131488,6 +133682,21 @@ static int getNextNode(
     return getNextString(pParse, &zInput[1], ii-1, ppExpr);
   }
 
+  if( sqlite3_fts3_enable_parentheses ){
+    if( *zInput=='(' ){
+      int nConsumed = 0;
+      pParse->nNest++;
+      rc = fts3ExprParse(pParse, zInput+1, nInput-1, ppExpr, &nConsumed);
+      if( rc==SQLITE_OK && !*ppExpr ){ rc = SQLITE_DONE; }
+      *pnConsumed = (int)(zInput - z) + 1 + nConsumed;
+      return rc;
+    }else if( *zInput==')' ){
+      pParse->nNest--;
+      *pnConsumed = (int)((zInput - z) + 1);
+      *ppExpr = 0;
+      return SQLITE_DONE;
+    }
+  }
 
   /* If control flows to this point, this must be a regular token, or 
   ** the end of the input. Read a regular token using the sqlite3_tokenizer
@@ -131606,96 +133815,100 @@ static int fts3ExprParse(
   while( rc==SQLITE_OK ){
     Fts3Expr *p = 0;
     int nByte = 0;
+
     rc = getNextNode(pParse, zIn, nIn, &p, &nByte);
+    assert( nByte>0 || (rc!=SQLITE_OK && p==0) );
     if( rc==SQLITE_OK ){
-      int isPhrase;
-
-      if( !sqlite3_fts3_enable_parentheses 
-       && p->eType==FTSQUERY_PHRASE && pParse->isNot 
-      ){
-        /* Create an implicit NOT operator. */
-        Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr));
-        if( !pNot ){
-          sqlite3Fts3ExprFree(p);
-          rc = SQLITE_NOMEM;
-          goto exprparse_out;
-        }
-        pNot->eType = FTSQUERY_NOT;
-        pNot->pRight = p;
-        p->pParent = pNot;
-        if( pNotBranch ){
-          pNot->pLeft = pNotBranch;
-          pNotBranch->pParent = pNot;
-        }
-        pNotBranch = pNot;
-        p = pPrev;
-      }else{
-        int eType = p->eType;
-        isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft);
+      if( p ){
+        int isPhrase;
 
-        /* The isRequirePhrase variable is set to true if a phrase or
-        ** an expression contained in parenthesis is required. If a
-        ** binary operator (AND, OR, NOT or NEAR) is encounted when
-        ** isRequirePhrase is set, this is a syntax error.
-        */
-        if( !isPhrase && isRequirePhrase ){
-          sqlite3Fts3ExprFree(p);
-          rc = SQLITE_ERROR;
-          goto exprparse_out;
-        }
-  
-        if( isPhrase && !isRequirePhrase ){
-          /* Insert an implicit AND operator. */
-          Fts3Expr *pAnd;
-          assert( pRet && pPrev );
-          pAnd = fts3MallocZero(sizeof(Fts3Expr));
-          if( !pAnd ){
+        if( !sqlite3_fts3_enable_parentheses 
+            && p->eType==FTSQUERY_PHRASE && pParse->isNot 
+        ){
+          /* Create an implicit NOT operator. */
+          Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr));
+          if( !pNot ){
             sqlite3Fts3ExprFree(p);
             rc = SQLITE_NOMEM;
             goto exprparse_out;
           }
-          pAnd->eType = FTSQUERY_AND;
-          insertBinaryOperator(&pRet, pPrev, pAnd);
-          pPrev = pAnd;
-        }
+          pNot->eType = FTSQUERY_NOT;
+          pNot->pRight = p;
+          p->pParent = pNot;
+          if( pNotBranch ){
+            pNot->pLeft = pNotBranch;
+            pNotBranch->pParent = pNot;
+          }
+          pNotBranch = pNot;
+          p = pPrev;
+        }else{
+          int eType = p->eType;
+          isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft);
 
-        /* This test catches attempts to make either operand of a NEAR
-        ** operator something other than a phrase. For example, either of
-        ** the following:
-        **
-        **    (bracketed expression) NEAR phrase
-        **    phrase NEAR (bracketed expression)
-        **
-        ** Return an error in either case.
-        */
-        if( pPrev && (
+          /* The isRequirePhrase variable is set to true if a phrase or
+          ** an expression contained in parenthesis is required. If a
+          ** binary operator (AND, OR, NOT or NEAR) is encounted when
+          ** isRequirePhrase is set, this is a syntax error.
+          */
+          if( !isPhrase && isRequirePhrase ){
+            sqlite3Fts3ExprFree(p);
+            rc = SQLITE_ERROR;
+            goto exprparse_out;
+          }
+
+          if( isPhrase && !isRequirePhrase ){
+            /* Insert an implicit AND operator. */
+            Fts3Expr *pAnd;
+            assert( pRet && pPrev );
+            pAnd = fts3MallocZero(sizeof(Fts3Expr));
+            if( !pAnd ){
+              sqlite3Fts3ExprFree(p);
+              rc = SQLITE_NOMEM;
+              goto exprparse_out;
+            }
+            pAnd->eType = FTSQUERY_AND;
+            insertBinaryOperator(&pRet, pPrev, pAnd);
+            pPrev = pAnd;
+          }
+
+          /* This test catches attempts to make either operand of a NEAR
+           ** operator something other than a phrase. For example, either of
+           ** the following:
+           **
+           **    (bracketed expression) NEAR phrase
+           **    phrase NEAR (bracketed expression)
+           **
+           ** Return an error in either case.
+           */
+          if( pPrev && (
             (eType==FTSQUERY_NEAR && !isPhrase && pPrev->eType!=FTSQUERY_PHRASE)
          || (eType!=FTSQUERY_PHRASE && isPhrase && pPrev->eType==FTSQUERY_NEAR)
-        )){
-          sqlite3Fts3ExprFree(p);
-          rc = SQLITE_ERROR;
-          goto exprparse_out;
-        }
-  
-        if( isPhrase ){
-          if( pRet ){
-            assert( pPrev && pPrev->pLeft && pPrev->pRight==0 );
-            pPrev->pRight = p;
-            p->pParent = pPrev;
+          )){
+            sqlite3Fts3ExprFree(p);
+            rc = SQLITE_ERROR;
+            goto exprparse_out;
+          }
+
+          if( isPhrase ){
+            if( pRet ){
+              assert( pPrev && pPrev->pLeft && pPrev->pRight==0 );
+              pPrev->pRight = p;
+              p->pParent = pPrev;
+            }else{
+              pRet = p;
+            }
           }else{
-            pRet = p;
+            insertBinaryOperator(&pRet, pPrev, p);
           }
-        }else{
-          insertBinaryOperator(&pRet, pPrev, p);
+          isRequirePhrase = !isPhrase;
         }
-        isRequirePhrase = !isPhrase;
+        pPrev = p;
       }
       assert( nByte>0 );
     }
     assert( rc!=SQLITE_OK || (nByte>0 && nByte<=nIn) );
     nIn -= nByte;
     zIn += nByte;
-    pPrev = p;
   }
 
   if( rc==SQLITE_DONE && pRet && isRequirePhrase ){
@@ -134683,6 +136896,7 @@ struct SegmentWriter {
   int nSize;                      /* Size of allocation at aData */
   int nData;                      /* Bytes of data in aData */
   char *aData;                    /* Pointer to block from malloc() */
+  i64 nLeafData;                  /* Number of bytes of leaf data written */
 };
 
 /*
@@ -134758,6 +136972,10 @@ struct SegmentNode {
 #define SQL_SELECT_INDEXES            35
 #define SQL_SELECT_MXLEVEL            36
 
+#define SQL_SELECT_LEVEL_RANGE2       37
+#define SQL_UPDATE_LEVEL_IDX          38
+#define SQL_UPDATE_LEVEL              39
+
 /*
 ** This function is used to obtain an SQLite prepared statement handle
 ** for the statement identified by the second argument. If successful,
@@ -134859,7 +137077,18 @@ static int fts3SqlStmt(
 
 /* SQL_SELECT_MXLEVEL
 **   Return the largest relative level in the FTS index or indexes.  */
-/* 36 */  "SELECT max( level %% 1024 ) FROM %Q.'%q_segdir'"
+/* 36 */  "SELECT max( level %% 1024 ) FROM %Q.'%q_segdir'",
+
+          /* Return segments in order from oldest to newest.*/ 
+/* 37 */  "SELECT level, idx, end_block "
+            "FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? "
+            "ORDER BY level DESC, idx ASC",
+
+          /* Update statements used while promoting segments */
+/* 38 */  "UPDATE OR FAIL %Q.'%q_segdir' SET level=-1,idx=? "
+            "WHERE level=? AND idx=?",
+/* 39 */  "UPDATE OR FAIL %Q.'%q_segdir' SET level=? WHERE level=-1"
+
   };
   int rc = SQLITE_OK;
   sqlite3_stmt *pStmt;
@@ -136400,6 +138629,7 @@ static int fts3WriteSegdir(
   sqlite3_int64 iStartBlock,      /* Value for "start_block" field */
   sqlite3_int64 iLeafEndBlock,    /* Value for "leaves_end_block" field */
   sqlite3_int64 iEndBlock,        /* Value for "end_block" field */
+  sqlite3_int64 nLeafData,        /* Bytes of leaf data in segment */
   char *zRoot,                    /* Blob value for "root" field */
   int nRoot                       /* Number of bytes in buffer zRoot */
 ){
@@ -136410,7 +138640,13 @@ static int fts3WriteSegdir(
     sqlite3_bind_int(pStmt, 2, iIdx);
     sqlite3_bind_int64(pStmt, 3, iStartBlock);
     sqlite3_bind_int64(pStmt, 4, iLeafEndBlock);
-    sqlite3_bind_int64(pStmt, 5, iEndBlock);
+    if( nLeafData==0 ){
+      sqlite3_bind_int64(pStmt, 5, iEndBlock);
+    }else{
+      char *zEnd = sqlite3_mprintf("%lld %lld", iEndBlock, nLeafData);
+      if( !zEnd ) return SQLITE_NOMEM;
+      sqlite3_bind_text(pStmt, 5, zEnd, -1, sqlite3_free);
+    }
     sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC);
     sqlite3_step(pStmt);
     rc = sqlite3_reset(pStmt);
@@ -136736,6 +138972,9 @@ static int fts3SegWriterAdd(
       nDoclist;                             /* Doclist data */
   }
 
+  /* Increase the total number of bytes written to account for the new entry. */
+  pWriter->nLeafData += nReq;
+
   /* If the buffer currently allocated is too small for this entry, realloc
   ** the buffer to make it large enough.
   */
@@ -136807,13 +139046,13 @@ static int fts3SegWriterFlush(
           pWriter->iFirst, pWriter->iFree, &iLast, &zRoot, &nRoot);
     }
     if( rc==SQLITE_OK ){
-      rc = fts3WriteSegdir(
-          p, iLevel, iIdx, pWriter->iFirst, iLastLeaf, iLast, zRoot, nRoot);
+      rc = fts3WriteSegdir(p, iLevel, iIdx, 
+          pWriter->iFirst, iLastLeaf, iLast, pWriter->nLeafData, zRoot, nRoot);
     }
   }else{
     /* The entire tree fits on the root node. Write it to the segdir table. */
-    rc = fts3WriteSegdir(
-        p, iLevel, iIdx, 0, 0, 0, pWriter->aData, pWriter->nData);
+    rc = fts3WriteSegdir(p, iLevel, iIdx, 
+        0, 0, 0, pWriter->nLeafData, pWriter->aData, pWriter->nData);
   }
   p->nLeafAdd++;
   return rc;
@@ -136898,6 +139137,37 @@ static int fts3SegmentMaxLevel(
 }
 
 /*
+** iAbsLevel is an absolute level that may be assumed to exist within
+** the database. This function checks if it is the largest level number
+** within its index. Assuming no error occurs, *pbMax is set to 1 if
+** iAbsLevel is indeed the largest level, or 0 otherwise, and SQLITE_OK
+** is returned. If an error occurs, an error code is returned and the
+** final value of *pbMax is undefined.
+*/
+static int fts3SegmentIsMaxLevel(Fts3Table *p, i64 iAbsLevel, int *pbMax){
+
+  /* Set pStmt to the compiled version of:
+  **
+  **   SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ?
+  **
+  ** (1024 is actually the value of macro FTS3_SEGDIR_PREFIXLEVEL_STR).
+  */
+  sqlite3_stmt *pStmt;
+  int rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR_MAX_LEVEL, &pStmt, 0);
+  if( rc!=SQLITE_OK ) return rc;
+  sqlite3_bind_int64(pStmt, 1, iAbsLevel+1);
+  sqlite3_bind_int64(pStmt, 2, 
+      ((iAbsLevel/FTS3_SEGDIR_MAXLEVEL)+1) * FTS3_SEGDIR_MAXLEVEL
+  );
+
+  *pbMax = 0;
+  if( SQLITE_ROW==sqlite3_step(pStmt) ){
+    *pbMax = sqlite3_column_type(pStmt, 0)==SQLITE_NULL;
+  }
+  return sqlite3_reset(pStmt);
+}
+
+/*
 ** Delete all entries in the %_segments table associated with the segment
 ** opened with seg-reader pSeg. This function does not affect the contents
 ** of the %_segdir table.
@@ -137433,6 +139703,140 @@ SQLITE_PRIVATE void sqlite3Fts3SegReaderFinish(
 }
 
 /*
+** Decode the "end_block" field, selected by column iCol of the SELECT 
+** statement passed as the first argument. 
+**
+** The "end_block" field may contain either an integer, or a text field
+** containing the text representation of two non-negative integers separated 
+** by one or more space (0x20) characters. In the first case, set *piEndBlock 
+** to the integer value and *pnByte to zero before returning. In the second, 
+** set *piEndBlock to the first value and *pnByte to the second.
+*/
+static void fts3ReadEndBlockField(
+  sqlite3_stmt *pStmt, 
+  int iCol, 
+  i64 *piEndBlock,
+  i64 *pnByte
+){
+  const unsigned char *zText = sqlite3_column_text(pStmt, iCol);
+  if( zText ){
+    int i;
+    int iMul = 1;
+    i64 iVal = 0;
+    for(i=0; zText[i]>='0' && zText[i]<='9'; i++){
+      iVal = iVal*10 + (zText[i] - '0');
+    }
+    *piEndBlock = iVal;
+    while( zText[i]==' ' ) i++;
+    iVal = 0;
+    if( zText[i]=='-' ){
+      i++;
+      iMul = -1;
+    }
+    for(/* no-op */; zText[i]>='0' && zText[i]<='9'; i++){
+      iVal = iVal*10 + (zText[i] - '0');
+    }
+    *pnByte = (iVal * (i64)iMul);
+  }
+}
+
+
+/*
+** A segment of size nByte bytes has just been written to absolute level
+** iAbsLevel. Promote any segments that should be promoted as a result.
+*/
+static int fts3PromoteSegments(
+  Fts3Table *p,                   /* FTS table handle */
+  sqlite3_int64 iAbsLevel,        /* Absolute level just updated */
+  sqlite3_int64 nByte             /* Size of new segment at iAbsLevel */
+){
+  int rc = SQLITE_OK;
+  sqlite3_stmt *pRange;
+
+  rc = fts3SqlStmt(p, SQL_SELECT_LEVEL_RANGE2, &pRange, 0);
+
+  if( rc==SQLITE_OK ){
+    int bOk = 0;
+    i64 iLast = (iAbsLevel/FTS3_SEGDIR_MAXLEVEL + 1) * FTS3_SEGDIR_MAXLEVEL - 1;
+    i64 nLimit = (nByte*3)/2;
+
+    /* Loop through all entries in the %_segdir table corresponding to 
+    ** segments in this index on levels greater than iAbsLevel. If there is
+    ** at least one such segment, and it is possible to determine that all 
+    ** such segments are smaller than nLimit bytes in size, they will be 
+    ** promoted to level iAbsLevel.  */
+    sqlite3_bind_int64(pRange, 1, iAbsLevel+1);
+    sqlite3_bind_int64(pRange, 2, iLast);
+    while( SQLITE_ROW==sqlite3_step(pRange) ){
+      i64 nSize = 0, dummy;
+      fts3ReadEndBlockField(pRange, 2, &dummy, &nSize);
+      if( nSize<=0 || nSize>nLimit ){
+        /* If nSize==0, then the %_segdir.end_block field does not not 
+        ** contain a size value. This happens if it was written by an
+        ** old version of FTS. In this case it is not possible to determine
+        ** the size of the segment, and so segment promotion does not
+        ** take place.  */
+        bOk = 0;
+        break;
+      }
+      bOk = 1;
+    }
+    rc = sqlite3_reset(pRange);
+
+    if( bOk ){
+      int iIdx = 0;
+      sqlite3_stmt *pUpdate1;
+      sqlite3_stmt *pUpdate2;
+
+      if( rc==SQLITE_OK ){
+        rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL_IDX, &pUpdate1, 0);
+      }
+      if( rc==SQLITE_OK ){
+        rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL, &pUpdate2, 0);
+      }
+
+      if( rc==SQLITE_OK ){
+
+        /* Loop through all %_segdir entries for segments in this index with
+        ** levels equal to or greater than iAbsLevel. As each entry is visited,
+        ** updated it to set (level = -1) and (idx = N), where N is 0 for the
+        ** oldest segment in the range, 1 for the next oldest, and so on.
+        **
+        ** In other words, move all segments being promoted to level -1,
+        ** setting the "idx" fields as appropriate to keep them in the same
+        ** order. The contents of level -1 (which is never used, except
+        ** transiently here), will be moved back to level iAbsLevel below.  */
+        sqlite3_bind_int64(pRange, 1, iAbsLevel);
+        while( SQLITE_ROW==sqlite3_step(pRange) ){
+          sqlite3_bind_int(pUpdate1, 1, iIdx++);
+          sqlite3_bind_int(pUpdate1, 2, sqlite3_column_int(pRange, 0));
+          sqlite3_bind_int(pUpdate1, 3, sqlite3_column_int(pRange, 1));
+          sqlite3_step(pUpdate1);
+          rc = sqlite3_reset(pUpdate1);
+          if( rc!=SQLITE_OK ){
+            sqlite3_reset(pRange);
+            break;
+          }
+        }
+      }
+      if( rc==SQLITE_OK ){
+        rc = sqlite3_reset(pRange);
+      }
+
+      /* Move level -1 to level iAbsLevel */
+      if( rc==SQLITE_OK ){
+        sqlite3_bind_int64(pUpdate2, 1, iAbsLevel);
+        sqlite3_step(pUpdate2);
+        rc = sqlite3_reset(pUpdate2);
+      }
+    }
+  }
+
+
+  return rc;
+}
+
+/*
 ** Merge all level iLevel segments in the database into a single 
 ** iLevel+1 segment. Or, if iLevel<0, merge all segments into a
 ** single segment with a level equal to the numerically largest level 
@@ -137456,6 +139860,7 @@ static int fts3SegmentMerge(
   Fts3SegFilter filter;           /* Segment term filter condition */
   Fts3MultiSegReader csr;         /* Cursor to iterate through level(s) */
   int bIgnoreEmpty = 0;           /* True to ignore empty segments */
+  i64 iMaxLevel = 0;              /* Max level number for this index/langid */
 
   assert( iLevel==FTS3_SEGCURSOR_ALL
        || iLevel==FTS3_SEGCURSOR_PENDING
@@ -137467,6 +139872,11 @@ static int fts3SegmentMerge(
   rc = sqlite3Fts3SegReaderCursor(p, iLangid, iIndex, iLevel, 0, 0, 1, 0, &csr);
   if( rc!=SQLITE_OK || csr.nSegment==0 ) goto finished;
 
+  if( iLevel!=FTS3_SEGCURSOR_PENDING ){
+    rc = fts3SegmentMaxLevel(p, iLangid, iIndex, &iMaxLevel);
+    if( rc!=SQLITE_OK ) goto finished;
+  }
+
   if( iLevel==FTS3_SEGCURSOR_ALL ){
     /* This call is to merge all segments in the database to a single
     ** segment. The level of the new segment is equal to the numerically
@@ -137476,21 +139886,21 @@ static int fts3SegmentMerge(
       rc = SQLITE_DONE;
       goto finished;
     }
-    rc = fts3SegmentMaxLevel(p, iLangid, iIndex, &iNewLevel);
+    iNewLevel = iMaxLevel;
     bIgnoreEmpty = 1;
 
-  }else if( iLevel==FTS3_SEGCURSOR_PENDING ){
-    iNewLevel = getAbsoluteLevel(p, iLangid, iIndex, 0);
-    rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, 0, &iIdx);
   }else{
     /* This call is to merge all segments at level iLevel. find the next
     ** available segment index at level iLevel+1. The call to
     ** fts3AllocateSegdirIdx() will merge the segments at level iLevel+1 to 
     ** a single iLevel+2 segment if necessary.  */
-    rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, iLevel+1, &iIdx);
+    assert( FTS3_SEGCURSOR_PENDING==-1 );
     iNewLevel = getAbsoluteLevel(p, iLangid, iIndex, iLevel+1);
+    rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, iLevel+1, &iIdx);
+    bIgnoreEmpty = (iLevel!=FTS3_SEGCURSOR_PENDING) && (iNewLevel>iMaxLevel);
   }
   if( rc!=SQLITE_OK ) goto finished;
+
   assert( csr.nSegment>0 );
   assert( iNewLevel>=getAbsoluteLevel(p, iLangid, iIndex, 0) );
   assert( iNewLevel<getAbsoluteLevel(p, iLangid, iIndex,FTS3_SEGDIR_MAXLEVEL) );
@@ -137507,7 +139917,7 @@ static int fts3SegmentMerge(
         csr.zTerm, csr.nTerm, csr.aDoclist, csr.nDoclist);
   }
   if( rc!=SQLITE_OK ) goto finished;
-  assert( pWriter );
+  assert( pWriter || bIgnoreEmpty );
 
   if( iLevel!=FTS3_SEGCURSOR_PENDING ){
     rc = fts3DeleteSegdir(
@@ -137515,7 +139925,14 @@ static int fts3SegmentMerge(
     );
     if( rc!=SQLITE_OK ) goto finished;
   }
-  rc = fts3SegWriterFlush(p, pWriter, iNewLevel, iIdx);
+  if( pWriter ){
+    rc = fts3SegWriterFlush(p, pWriter, iNewLevel, iIdx);
+    if( rc==SQLITE_OK ){
+      if( iLevel==FTS3_SEGCURSOR_PENDING || iNewLevel<iMaxLevel ){
+        rc = fts3PromoteSegments(p, iNewLevel, pWriter->nLeafData);
+      }
+    }
+  }
 
  finished:
   fts3SegWriterFree(pWriter);
@@ -137525,7 +139942,7 @@ static int fts3SegmentMerge(
 
 
 /* 
-** Flush the contents of pendingTerms to level 0 segments.
+** Flush the contents of pendingTerms to level 0 segments. 
 */
 SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *p){
   int rc = SQLITE_OK;
@@ -137541,14 +139958,19 @@ SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *p){
   ** estimate the number of leaf blocks of content to be written
   */
   if( rc==SQLITE_OK && p->bHasStat
-   && p->bAutoincrmerge==0xff && p->nLeafAdd>0
+   && p->nAutoincrmerge==0xff && p->nLeafAdd>0
   ){
     sqlite3_stmt *pStmt = 0;
     rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pStmt, 0);
     if( rc==SQLITE_OK ){
       sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE);
       rc = sqlite3_step(pStmt);
-      p->bAutoincrmerge = (rc==SQLITE_ROW && sqlite3_column_int(pStmt, 0));
+      if( rc==SQLITE_ROW ){
+        p->nAutoincrmerge = sqlite3_column_int(pStmt, 0);
+        if( p->nAutoincrmerge==1 ) p->nAutoincrmerge = 8;
+      }else if( rc==SQLITE_DONE ){
+        p->nAutoincrmerge = 0;
+      }
       rc = sqlite3_reset(pStmt);
     }
   }
@@ -137916,6 +140338,8 @@ struct IncrmergeWriter {
   int iIdx;                       /* Index of *output* segment in iAbsLevel+1 */
   sqlite3_int64 iStart;           /* Block number of first allocated block */
   sqlite3_int64 iEnd;             /* Block number of last allocated block */
+  sqlite3_int64 nLeafData;        /* Bytes of leaf page data so far */
+  u8 bNoLeafData;                 /* If true, store 0 for segment size */
   NodeWriter aNodeWriter[FTS_MAX_APPENDABLE_HEIGHT];
 };
 
@@ -138254,8 +140678,8 @@ static int fts3IncrmergeAppend(
     nSpace += sqlite3Fts3VarintLen(nDoclist) + nDoclist;
   }
 
+  pWriter->nLeafData += nSpace;
   blobGrowBuffer(&pLeaf->block, pLeaf->block.n + nSpace, &rc);
-
   if( rc==SQLITE_OK ){
     if( pLeaf->block.n==0 ){
       pLeaf->block.n = 1;
@@ -138354,6 +140778,7 @@ static void fts3IncrmergeRelease(
         pWriter->iStart,                    /* start_block */
         pWriter->aNodeWriter[0].iBlock,     /* leaves_end_block */
         pWriter->iEnd,                      /* end_block */
+        (pWriter->bNoLeafData==0 ? pWriter->nLeafData : 0),   /* end_block */
         pRoot->block.a, pRoot->block.n      /* root */
     );
   }
@@ -138455,7 +140880,11 @@ static int fts3IncrmergeLoad(
     if( sqlite3_step(pSelect)==SQLITE_ROW ){
       iStart = sqlite3_column_int64(pSelect, 1);
       iLeafEnd = sqlite3_column_int64(pSelect, 2);
-      iEnd = sqlite3_column_int64(pSelect, 3);
+      fts3ReadEndBlockField(pSelect, 3, &iEnd, &pWriter->nLeafData);
+      if( pWriter->nLeafData<0 ){
+        pWriter->nLeafData = pWriter->nLeafData * -1;
+      }
+      pWriter->bNoLeafData = (pWriter->nLeafData==0);
       nRoot = sqlite3_column_bytes(pSelect, 4);
       aRoot = sqlite3_column_blob(pSelect, 4);
     }else{
@@ -139056,11 +141485,11 @@ static int fts3IncrmergeHintPop(Blob *pHint, i64 *piAbsLevel, int *pnInput){
 /*
 ** Attempt an incremental merge that writes nMerge leaf blocks.
 **
-** Incremental merges happen nMin segments at a time. The two
-** segments to be merged are the nMin oldest segments (the ones with
-** the smallest indexes) in the highest level that contains at least
-** nMin segments. Multiple merges might occur in an attempt to write the 
-** quota of nMerge leaf blocks.
+** Incremental merges happen nMin segments at a time. The segments 
+** to be merged are the nMin oldest segments (the ones with the smallest 
+** values for the _segdir.idx field) in the highest level that contains 
+** at least nMin segments. Multiple merges might occur in an attempt to 
+** write the quota of nMerge leaf blocks.
 */
 SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){
   int rc;                         /* Return code */
@@ -139085,6 +141514,7 @@ SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){
     const i64 nMod = FTS3_SEGDIR_MAXLEVEL * p->nIndex;
     sqlite3_stmt *pFindLevel = 0; /* SQL used to determine iAbsLevel */
     int bUseHint = 0;             /* True if attempting to append */
+    int iIdx = 0;                 /* Largest idx in level (iAbsLevel+1) */
 
     /* Search the %_segdir table for the absolute level with the smallest
     ** relative level number that contains at least nMin segments, if any.
@@ -139138,6 +141568,19 @@ SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){
     ** to start work on some other level.  */
     memset(pWriter, 0, nAlloc);
     pFilter->flags = FTS3_SEGMENT_REQUIRE_POS;
+
+    if( rc==SQLITE_OK ){
+      rc = fts3IncrmergeOutputIdx(p, iAbsLevel, &iIdx);
+      assert( bUseHint==1 || bUseHint==0 );
+      if( iIdx==0 || (bUseHint && iIdx==1) ){
+        int bIgnore = 0;
+        rc = fts3SegmentIsMaxLevel(p, iAbsLevel+1, &bIgnore);
+        if( bIgnore ){
+          pFilter->flags |= FTS3_SEGMENT_IGNORE_EMPTY;
+        }
+      }
+    }
+
     if( rc==SQLITE_OK ){
       rc = fts3IncrmergeCsr(p, iAbsLevel, nSeg, pCsr);
     }
@@ -139145,16 +141588,12 @@ SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){
      && SQLITE_OK==(rc = sqlite3Fts3SegReaderStart(p, pCsr, pFilter))
      && SQLITE_ROW==(rc = sqlite3Fts3SegReaderStep(p, pCsr))
     ){
-      int iIdx = 0;               /* Largest idx in level (iAbsLevel+1) */
-      rc = fts3IncrmergeOutputIdx(p, iAbsLevel, &iIdx);
-      if( rc==SQLITE_OK ){
-        if( bUseHint && iIdx>0 ){
-          const char *zKey = pCsr->zTerm;
-          int nKey = pCsr->nTerm;
-          rc = fts3IncrmergeLoad(p, iAbsLevel, iIdx-1, zKey, nKey, pWriter);
-        }else{
-          rc = fts3IncrmergeWriter(p, iAbsLevel, iIdx, pCsr, pWriter);
-        }
+      if( bUseHint && iIdx>0 ){
+        const char *zKey = pCsr->zTerm;
+        int nKey = pCsr->nTerm;
+        rc = fts3IncrmergeLoad(p, iAbsLevel, iIdx-1, zKey, nKey, pWriter);
+      }else{
+        rc = fts3IncrmergeWriter(p, iAbsLevel, iIdx, pCsr, pWriter);
       }
 
       if( rc==SQLITE_OK && pWriter->nLeafEst ){
@@ -139176,7 +141615,13 @@ SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){
         }
       }
 
+      if( nSeg!=0 ){
+        pWriter->nLeafData = pWriter->nLeafData * -1;
+      }
       fts3IncrmergeRelease(p, pWriter, &rc);
+      if( nSeg==0 && pWriter->bNoLeafData==0 ){
+        fts3PromoteSegments(p, iAbsLevel+1, pWriter->nLeafData);
+      }
     }
 
     sqlite3Fts3SegReaderFinish(pCsr);
@@ -139263,7 +141708,10 @@ static int fts3DoAutoincrmerge(
 ){
   int rc = SQLITE_OK;
   sqlite3_stmt *pStmt = 0;
-  p->bAutoincrmerge = fts3Getint(&zParam)!=0;
+  p->nAutoincrmerge = fts3Getint(&zParam);
+  if( p->nAutoincrmerge==1 || p->nAutoincrmerge>FTS3_MERGE_COUNT ){
+    p->nAutoincrmerge = 8;
+  }
   if( !p->bHasStat ){
     assert( p->bFts4==0 );
     sqlite3Fts3CreateStatTable(&rc, p);
@@ -139272,7 +141720,7 @@ static int fts3DoAutoincrmerge(
   rc = fts3SqlStmt(p, SQL_REPLACE_STAT, &pStmt, 0);
   if( rc ) return rc;
   sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE);
-  sqlite3_bind_int(pStmt, 2, p->bAutoincrmerge);
+  sqlite3_bind_int(pStmt, 2, p->nAutoincrmerge);
   sqlite3_step(pStmt);
   rc = sqlite3_reset(pStmt);
   return rc;
@@ -139429,34 +141877,36 @@ static int fts3IntegrityCheck(Fts3Table *p, int *pbOk){
       int iCol;
 
       for(iCol=0; rc==SQLITE_OK && iCol<p->nColumn; iCol++){
-        const char *zText = (const char *)sqlite3_column_text(pStmt, iCol+1);
-        int nText = sqlite3_column_bytes(pStmt, iCol+1);
-        sqlite3_tokenizer_cursor *pT = 0;
-
-        rc = sqlite3Fts3OpenTokenizer(p->pTokenizer, iLang, zText, nText, &pT);
-        while( rc==SQLITE_OK ){
-          char const *zToken;       /* Buffer containing token */
-          int nToken = 0;           /* Number of bytes in token */
-          int iDum1 = 0, iDum2 = 0; /* Dummy variables */
-          int iPos = 0;             /* Position of token in zText */
-
-          rc = pModule->xNext(pT, &zToken, &nToken, &iDum1, &iDum2, &iPos);
-          if( rc==SQLITE_OK ){
-            int i;
-            cksum2 = cksum2 ^ fts3ChecksumEntry(
-                zToken, nToken, iLang, 0, iDocid, iCol, iPos
-            );
-            for(i=1; i<p->nIndex; i++){
-              if( p->aIndex[i].nPrefix<=nToken ){
-                cksum2 = cksum2 ^ fts3ChecksumEntry(
-                  zToken, p->aIndex[i].nPrefix, iLang, i, iDocid, iCol, iPos
-                );
+        if( p->abNotindexed[iCol]==0 ){
+          const char *zText = (const char *)sqlite3_column_text(pStmt, iCol+1);
+          int nText = sqlite3_column_bytes(pStmt, iCol+1);
+          sqlite3_tokenizer_cursor *pT = 0;
+
+          rc = sqlite3Fts3OpenTokenizer(p->pTokenizer, iLang, zText, nText,&pT);
+          while( rc==SQLITE_OK ){
+            char const *zToken;       /* Buffer containing token */
+            int nToken = 0;           /* Number of bytes in token */
+            int iDum1 = 0, iDum2 = 0; /* Dummy variables */
+            int iPos = 0;             /* Position of token in zText */
+
+            rc = pModule->xNext(pT, &zToken, &nToken, &iDum1, &iDum2, &iPos);
+            if( rc==SQLITE_OK ){
+              int i;
+              cksum2 = cksum2 ^ fts3ChecksumEntry(
+                  zToken, nToken, iLang, 0, iDocid, iCol, iPos
+              );
+              for(i=1; i<p->nIndex; i++){
+                if( p->aIndex[i].nPrefix<=nToken ){
+                  cksum2 = cksum2 ^ fts3ChecksumEntry(
+                      zToken, p->aIndex[i].nPrefix, iLang, i, iDocid, iCol, iPos
+                  );
+                }
               }
             }
           }
+          if( pT ) pModule->xClose(pT);
+          if( rc==SQLITE_DONE ) rc = SQLITE_OK;
         }
-        if( pT ) pModule->xClose(pT);
-        if( rc==SQLITE_DONE ) rc = SQLITE_OK;
       }
     }
 
@@ -139761,6 +142211,10 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod(
   int nChng = 0;                  /* Net change in number of documents */
   int bInsertDone = 0;
 
+  /* At this point it must be known if the %_stat table exists or not.
+  ** So bHasStat may not be 2.  */
+  assert( p->bHasStat==0 || p->bHasStat==1 );
+
   assert( p->pSegments==0 );
   assert( 
       nArg==1                     /* DELETE operations */
@@ -141448,7 +143902,7 @@ SQLITE_PRIVATE void sqlite3Fts3Matchinfo(
 ** Implementation of the "unicode" full-text-search tokenizer.
 */
 
-#ifdef SQLITE_ENABLE_FTS4_UNICODE61
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
 
 #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)
 
@@ -141664,7 +144118,7 @@ static int unicodeCreate(
 
   for(i=0; rc==SQLITE_OK && i<nArg; i++){
     const char *z = azArg[i];
-    int n = strlen(z);
+    int n = (int)strlen(z);
 
     if( n==19 && memcmp("remove_diacritics=1", z, 19)==0 ){
       pNew->bRemoveDiacritic = 1;
@@ -141751,7 +144205,7 @@ static int unicodeNext(
 ){
   unicode_cursor *pCsr = (unicode_cursor *)pC;
   unicode_tokenizer *p = ((unicode_tokenizer *)pCsr->base.pTokenizer);
-  int iCode;
+  int iCode = 0;
   char *zOut;
   const unsigned char *z = &pCsr->aInput[pCsr->iOff];
   const unsigned char *zStart = z;
@@ -141796,11 +144250,11 @@ static int unicodeNext(
   );
 
   /* Set the output variables and return. */
-  pCsr->iOff = (z - pCsr->aInput);
+  pCsr->iOff = (int)(z - pCsr->aInput);
   *paToken = pCsr->zToken;
-  *pnToken = zOut - pCsr->zToken;
-  *piStart = (zStart - pCsr->aInput);
-  *piEnd = (zEnd - pCsr->aInput);
+  *pnToken = (int)(zOut - pCsr->zToken);
+  *piStart = (int)(zStart - pCsr->aInput);
+  *piEnd = (int)(zEnd - pCsr->aInput);
   *piPos = pCsr->iToken++;
   return SQLITE_OK;
 }
@@ -141823,7 +144277,7 @@ SQLITE_PRIVATE void sqlite3Fts3UnicodeTokenizer(sqlite3_tokenizer_module const *
 }
 
 #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */
-#endif /* ifndef SQLITE_ENABLE_FTS4_UNICODE61 */
+#endif /* ifndef SQLITE_DISABLE_FTS3_UNICODE */
 
 /************** End of fts3_unicode.c ****************************************/
 /************** Begin file fts3_unicode2.c ***********************************/
@@ -141844,7 +144298,7 @@ SQLITE_PRIVATE void sqlite3Fts3UnicodeTokenizer(sqlite3_tokenizer_module const *
 ** DO NOT EDIT THIS MACHINE GENERATED FILE.
 */
 
-#if defined(SQLITE_ENABLE_FTS4_UNICODE61)
+#ifndef SQLITE_DISABLE_FTS3_UNICODE
 #if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4)
 
 /* #include <assert.h> */
@@ -141868,7 +144322,7 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int c){
   ** C. It is not possible to represent a range larger than 1023 codepoints 
   ** using this format.
   */
-  const static unsigned int aEntry[] = {
+  static const unsigned int aEntry[] = {
     0x00000030, 0x0000E807, 0x00016C06, 0x0001EC2F, 0x0002AC07,
     0x0002D001, 0x0002D803, 0x0002EC01, 0x0002FC01, 0x00035C01,
     0x0003DC01, 0x000B0804, 0x000B480E, 0x000B9407, 0x000BB401,
@@ -141960,7 +144414,7 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int c){
     return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 );
   }else if( c<(1<<22) ){
     unsigned int key = (((unsigned int)c)<<10) | 0x000003FF;
-    int iRes;
+    int iRes = 0;
     int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1;
     int iLo = 0;
     while( iHi>=iLo ){
@@ -142031,7 +144485,7 @@ static int remove_diacritic(int c){
   }
   assert( key>=aDia[iRes] );
   return ((c > (aDia[iRes]>>3) + (aDia[iRes]&0x07)) ? c : (int)aChar[iRes]);
-};
+}
 
 
 /*
@@ -142191,7 +144645,7 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){
   return ret;
 }
 #endif /* defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) */
-#endif /* !defined(SQLITE_ENABLE_FTS4_UNICODE61) */
+#endif /* !defined(SQLITE_DISABLE_FTS3_UNICODE) */
 
 /************** End of fts3_unicode2.c ***************************************/
 /************** Begin file rtree.c *******************************************/
@@ -142251,48 +144705,6 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){
 
 #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_RTREE)
 
-/*
-** This file contains an implementation of a couple of different variants
-** of the r-tree algorithm. See the README file for further details. The 
-** same data-structure is used for all, but the algorithms for insert and
-** delete operations vary. The variants used are selected at compile time 
-** by defining the following symbols:
-*/
-
-/* Either, both or none of the following may be set to activate 
-** r*tree variant algorithms.
-*/
-#define VARIANT_RSTARTREE_CHOOSESUBTREE 0
-#define VARIANT_RSTARTREE_REINSERT      1
-
-/* 
-** Exactly one of the following must be set to 1.
-*/
-#define VARIANT_GUTTMAN_QUADRATIC_SPLIT 0
-#define VARIANT_GUTTMAN_LINEAR_SPLIT    0
-#define VARIANT_RSTARTREE_SPLIT         1
-
-#define VARIANT_GUTTMAN_SPLIT \
-        (VARIANT_GUTTMAN_LINEAR_SPLIT||VARIANT_GUTTMAN_QUADRATIC_SPLIT)
-
-#if VARIANT_GUTTMAN_QUADRATIC_SPLIT
-  #define PickNext QuadraticPickNext
-  #define PickSeeds QuadraticPickSeeds
-  #define AssignCells splitNodeGuttman
-#endif
-#if VARIANT_GUTTMAN_LINEAR_SPLIT
-  #define PickNext LinearPickNext
-  #define PickSeeds LinearPickSeeds
-  #define AssignCells splitNodeGuttman
-#endif
-#if VARIANT_RSTARTREE_SPLIT
-  #define AssignCells splitNodeStartree
-#endif
-
-#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) 
-# define NDEBUG 1
-#endif
-
 #ifndef SQLITE_CORE
   SQLITE_EXTENSION_INIT1
 #else
@@ -142300,11 +144712,13 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){
 
 /* #include <string.h> */
 /* #include <assert.h> */
+/* #include <stdio.h> */
 
 #ifndef SQLITE_AMALGAMATION
 #include "sqlite3rtree.h"
 typedef sqlite3_int64 i64;
 typedef unsigned char u8;
+typedef unsigned short u16;
 typedef unsigned int u32;
 #endif
 
@@ -142322,6 +144736,7 @@ typedef struct RtreeConstraint RtreeConstraint;
 typedef struct RtreeMatchArg RtreeMatchArg;
 typedef struct RtreeGeomCallback RtreeGeomCallback;
 typedef union RtreeCoord RtreeCoord;
+typedef struct RtreeSearchPoint RtreeSearchPoint;
 
 /* The rtree may have between 1 and RTREE_MAX_DIMENSIONS dimensions. */
 #define RTREE_MAX_DIMENSIONS 5
@@ -142330,7 +144745,7 @@ typedef union RtreeCoord RtreeCoord;
 ** ever contain very many entries, so a fixed number of buckets is 
 ** used.
 */
-#define HASHSIZE 128
+#define HASHSIZE 97
 
 /* The xBestIndex method of this virtual table requires an estimate of
 ** the number of rows in the virtual table to calculate the costs of
@@ -142346,15 +144761,15 @@ typedef union RtreeCoord RtreeCoord;
 ** An rtree virtual-table object.
 */
 struct Rtree {
-  sqlite3_vtab base;
+  sqlite3_vtab base;          /* Base class.  Must be first */
   sqlite3 *db;                /* Host database connection */
   int iNodeSize;              /* Size in bytes of each node in the node table */
-  int nDim;                   /* Number of dimensions */
-  int nBytesPerCell;          /* Bytes consumed per cell */
+  u8 nDim;                    /* Number of dimensions */
+  u8 eCoordType;              /* RTREE_COORD_REAL32 or RTREE_COORD_INT32 */
+  u8 nBytesPerCell;           /* Bytes consumed per cell */
   int iDepth;                 /* Current depth of the r-tree structure */
   char *zDb;                  /* Name of database containing r-tree table */
   char *zName;                /* Name of r-tree table */ 
-  RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ 
   int nBusy;                  /* Current number of users of this structure */
   i64 nRowEst;                /* Estimated number of rows in this table */
 
@@ -142381,10 +144796,10 @@ struct Rtree {
   sqlite3_stmt *pWriteParent;
   sqlite3_stmt *pDeleteParent;
 
-  int eCoordType;
+  RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ 
 };
 
-/* Possible values for eCoordType: */
+/* Possible values for Rtree.eCoordType: */
 #define RTREE_COORD_REAL32 0
 #define RTREE_COORD_INT32  1
 
@@ -142396,12 +144811,31 @@ struct Rtree {
 #ifdef SQLITE_RTREE_INT_ONLY
   typedef sqlite3_int64 RtreeDValue;       /* High accuracy coordinate */
   typedef int RtreeValue;                  /* Low accuracy coordinate */
+# define RTREE_ZERO 0
 #else
   typedef double RtreeDValue;              /* High accuracy coordinate */
   typedef float RtreeValue;                /* Low accuracy coordinate */
+# define RTREE_ZERO 0.0
 #endif
 
 /*
+** When doing a search of an r-tree, instances of the following structure
+** record intermediate results from the tree walk.
+**
+** The id is always a node-id.  For iLevel>=1 the id is the node-id of
+** the node that the RtreeSearchPoint represents.  When iLevel==0, however,
+** the id is of the parent node and the cell that RtreeSearchPoint
+** represents is the iCell-th entry in the parent node.
+*/
+struct RtreeSearchPoint {
+  RtreeDValue rScore;    /* The score for this node.  Smallest goes first. */
+  sqlite3_int64 id;      /* Node ID */
+  u8 iLevel;             /* 0=entries.  1=leaf node.  2+ for higher */
+  u8 eWithin;            /* PARTLY_WITHIN or FULLY_WITHIN */
+  u8 iCell;              /* Cell index within the node */
+};
+
+/*
 ** The minimum number of cells allowed for a node is a third of the 
 ** maximum. In Gutman's notation:
 **
@@ -142423,21 +144857,44 @@ struct Rtree {
 */
 #define RTREE_MAX_DEPTH 40
 
+
+/*
+** Number of entries in the cursor RtreeNode cache.  The first entry is
+** used to cache the RtreeNode for RtreeCursor.sPoint.  The remaining
+** entries cache the RtreeNode for the first elements of the priority queue.
+*/
+#define RTREE_CACHE_SZ  5
+
 /* 
 ** An rtree cursor object.
 */
 struct RtreeCursor {
-  sqlite3_vtab_cursor base;
-  RtreeNode *pNode;                 /* Node cursor is currently pointing at */
-  int iCell;                        /* Index of current cell in pNode */
+  sqlite3_vtab_cursor base;         /* Base class.  Must be first */
+  u8 atEOF;                         /* True if at end of search */
+  u8 bPoint;                        /* True if sPoint is valid */
   int iStrategy;                    /* Copy of idxNum search parameter */
   int nConstraint;                  /* Number of entries in aConstraint */
   RtreeConstraint *aConstraint;     /* Search constraints. */
+  int nPointAlloc;                  /* Number of slots allocated for aPoint[] */
+  int nPoint;                       /* Number of slots used in aPoint[] */
+  int mxLevel;                      /* iLevel value for root of the tree */
+  RtreeSearchPoint *aPoint;         /* Priority queue for search points */
+  RtreeSearchPoint sPoint;          /* Cached next search point */
+  RtreeNode *aNode[RTREE_CACHE_SZ]; /* Rtree node cache */
+  u32 anQueue[RTREE_MAX_DEPTH+1];   /* Number of queued entries by iLevel */
 };
 
+/* Return the Rtree of a RtreeCursor */
+#define RTREE_OF_CURSOR(X)   ((Rtree*)((X)->base.pVtab))
+
+/*
+** A coordinate can be either a floating point number or a integer.  All
+** coordinates within a single R-Tree are always of the same time.
+*/
 union RtreeCoord {
-  RtreeValue f;
-  int i;
+  RtreeValue f;      /* Floating point value */
+  int i;             /* Integer value */
+  u32 u;             /* Unsigned for byte-order conversions */
 };
 
 /*
@@ -142462,38 +144919,67 @@ union RtreeCoord {
 struct RtreeConstraint {
   int iCoord;                     /* Index of constrained coordinate */
   int op;                         /* Constraining operation */
-  RtreeDValue rValue;             /* Constraint value. */
-  int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*);
-  sqlite3_rtree_geometry *pGeom;  /* Constraint callback argument for a MATCH */
+  union {
+    RtreeDValue rValue;             /* Constraint value. */
+    int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*);
+    int (*xQueryFunc)(sqlite3_rtree_query_info*);
+  } u;
+  sqlite3_rtree_query_info *pInfo;  /* xGeom and xQueryFunc argument */
 };
 
 /* Possible values for RtreeConstraint.op */
-#define RTREE_EQ    0x41
-#define RTREE_LE    0x42
-#define RTREE_LT    0x43
-#define RTREE_GE    0x44
-#define RTREE_GT    0x45
-#define RTREE_MATCH 0x46
+#define RTREE_EQ    0x41  /* A */
+#define RTREE_LE    0x42  /* B */
+#define RTREE_LT    0x43  /* C */
+#define RTREE_GE    0x44  /* D */
+#define RTREE_GT    0x45  /* E */
+#define RTREE_MATCH 0x46  /* F: Old-style sqlite3_rtree_geometry_callback() */
+#define RTREE_QUERY 0x47  /* G: New-style sqlite3_rtree_query_callback() */
+
 
 /* 
 ** An rtree structure node.
 */
 struct RtreeNode {
-  RtreeNode *pParent;               /* Parent node */
-  i64 iNode;
-  int nRef;
-  int isDirty;
-  u8 *zData;
-  RtreeNode *pNext;                 /* Next node in this hash chain */
+  RtreeNode *pParent;         /* Parent node */
+  i64 iNode;                  /* The node number */
+  int nRef;                   /* Number of references to this node */
+  int isDirty;                /* True if the node needs to be written to disk */
+  u8 *zData;                  /* Content of the node, as should be on disk */
+  RtreeNode *pNext;           /* Next node in this hash collision chain */
 };
+
+/* Return the number of cells in a node  */
 #define NCELL(pNode) readInt16(&(pNode)->zData[2])
 
 /* 
-** Structure to store a deserialized rtree record.
+** A single cell from a node, deserialized
 */
 struct RtreeCell {
-  i64 iRowid;
-  RtreeCoord aCoord[RTREE_MAX_DIMENSIONS*2];
+  i64 iRowid;                                 /* Node or entry ID */
+  RtreeCoord aCoord[RTREE_MAX_DIMENSIONS*2];  /* Bounding box coordinates */
+};
+
+
+/*
+** This object becomes the sqlite3_user_data() for the SQL functions
+** that are created by sqlite3_rtree_geometry_callback() and
+** sqlite3_rtree_query_callback() and which appear on the right of MATCH
+** operators in order to constrain a search.
+**
+** xGeom and xQueryFunc are the callback functions.  Exactly one of 
+** xGeom and xQueryFunc fields is non-NULL, depending on whether the
+** SQL function was created using sqlite3_rtree_geometry_callback() or
+** sqlite3_rtree_query_callback().
+** 
+** This object is deleted automatically by the destructor mechanism in
+** sqlite3_create_function_v2().
+*/
+struct RtreeGeomCallback {
+  int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*);
+  int (*xQueryFunc)(sqlite3_rtree_query_info*);
+  void (*xDestructor)(void*);
+  void *pContext;
 };
 
 
@@ -142505,29 +144991,16 @@ struct RtreeCell {
 #define RTREE_GEOMETRY_MAGIC 0x891245AB
 
 /*
-** An instance of this structure must be supplied as a blob argument to
-** the right-hand-side of an SQL MATCH operator used to constrain an
-** r-tree query.
+** An instance of this structure (in the form of a BLOB) is returned by
+** the SQL functions that sqlite3_rtree_geometry_callback() and
+** sqlite3_rtree_query_callback() create, and is read as the right-hand
+** operand to the MATCH operator of an R-Tree.
 */
 struct RtreeMatchArg {
-  u32 magic;                      /* Always RTREE_GEOMETRY_MAGIC */
-  int (*xGeom)(sqlite3_rtree_geometry *, int, RtreeDValue*, int *);
-  void *pContext;
-  int nParam;
-  RtreeDValue aParam[1];
-};
-
-/*
-** When a geometry callback is created (see sqlite3_rtree_geometry_callback),
-** a single instance of the following structure is allocated. It is used
-** as the context for the user-function created by by s_r_g_c(). The object
-** is eventually deleted by the destructor mechanism provided by
-** sqlite3_create_function_v2() (which is called by s_r_g_c() to create
-** the geometry callback function).
-*/
-struct RtreeGeomCallback {
-  int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*);
-  void *pContext;
+  u32 magic;                  /* Always RTREE_GEOMETRY_MAGIC */
+  RtreeGeomCallback cb;       /* Info about the callback functions */
+  int nParam;                 /* Number of parameters to the SQL function */
+  RtreeDValue aParam[1];      /* Values for parameters to the SQL function */
 };
 
 #ifndef MAX
@@ -142621,10 +145094,7 @@ static void nodeZero(Rtree *pRtree, RtreeNode *p){
 ** in the Rtree.aHash table.
 */
 static int nodeHash(i64 iNode){
-  return (
-    (iNode>>56) ^ (iNode>>48) ^ (iNode>>40) ^ (iNode>>32) ^ 
-    (iNode>>24) ^ (iNode>>16) ^ (iNode>> 8) ^ (iNode>> 0)
-  ) % HASHSIZE;
+  return iNode % HASHSIZE;
 }
 
 /*
@@ -142684,8 +145154,7 @@ static RtreeNode *nodeNew(Rtree *pRtree, RtreeNode *pParent){
 /*
 ** Obtain a reference to an r-tree node.
 */
-static int
-nodeAcquire(
+static int nodeAcquire(
   Rtree *pRtree,             /* R-tree structure */
   i64 iNode,                 /* Node number to load */
   RtreeNode *pParent,        /* Either the parent node or NULL */
@@ -142774,10 +145243,10 @@ nodeAcquire(
 ** Overwrite cell iCell of node pNode with the contents of pCell.
 */
 static void nodeOverwriteCell(
-  Rtree *pRtree, 
-  RtreeNode *pNode,  
-  RtreeCell *pCell, 
-  int iCell
+  Rtree *pRtree,             /* The overall R-Tree */
+  RtreeNode *pNode,          /* The node into which the cell is to be written */
+  RtreeCell *pCell,          /* The cell to write */
+  int iCell                  /* Index into pNode into which pCell is written */
 ){
   int ii;
   u8 *p = &pNode->zData[4 + pRtree->nBytesPerCell*iCell];
@@ -142789,7 +145258,7 @@ static void nodeOverwriteCell(
 }
 
 /*
-** Remove cell the cell with index iCell from node pNode.
+** Remove the cell with index iCell from node pNode.
 */
 static void nodeDeleteCell(Rtree *pRtree, RtreeNode *pNode, int iCell){
   u8 *pDst = &pNode->zData[4 + pRtree->nBytesPerCell*iCell];
@@ -142806,11 +145275,10 @@ static void nodeDeleteCell(Rtree *pRtree, RtreeNode *pNode, int iCell){
 **
 ** If there is not enough free space in pNode, return SQLITE_FULL.
 */
-static int
-nodeInsertCell(
-  Rtree *pRtree, 
-  RtreeNode *pNode, 
-  RtreeCell *pCell 
+static int nodeInsertCell(
+  Rtree *pRtree,                /* The overall R-Tree */
+  RtreeNode *pNode,             /* Write new cell into this node */
+  RtreeCell *pCell              /* The cell to be inserted */
 ){
   int nCell;                    /* Current number of cells in pNode */
   int nMaxCell;                 /* Maximum number of cells for pNode */
@@ -142831,8 +145299,7 @@ nodeInsertCell(
 /*
 ** If the node is dirty, write it out to the database.
 */
-static int
-nodeWrite(Rtree *pRtree, RtreeNode *pNode){
+static int nodeWrite(Rtree *pRtree, RtreeNode *pNode){
   int rc = SQLITE_OK;
   if( pNode->isDirty ){
     sqlite3_stmt *p = pRtree->pWriteNode;
@@ -142857,8 +145324,7 @@ nodeWrite(Rtree *pRtree, RtreeNode *pNode){
 ** Release a reference to a node. If the node is dirty and the reference
 ** count drops to zero, the node data is written to the database.
 */
-static int
-nodeRelease(Rtree *pRtree, RtreeNode *pNode){
+static int nodeRelease(Rtree *pRtree, RtreeNode *pNode){
   int rc = SQLITE_OK;
   if( pNode ){
     assert( pNode->nRef>0 );
@@ -142886,9 +145352,9 @@ nodeRelease(Rtree *pRtree, RtreeNode *pNode){
 ** an internal node, then the 64-bit integer is a child page number.
 */
 static i64 nodeGetRowid(
-  Rtree *pRtree, 
-  RtreeNode *pNode, 
-  int iCell
+  Rtree *pRtree,       /* The overall R-Tree */
+  RtreeNode *pNode,    /* The node from which to extract the ID */
+  int iCell            /* The cell index from which to extract the ID */
 ){
   assert( iCell<NCELL(pNode) );
   return readInt64(&pNode->zData[4 + pRtree->nBytesPerCell*iCell]);
@@ -142898,11 +145364,11 @@ static i64 nodeGetRowid(
 ** Return coordinate iCoord from cell iCell in node pNode.
 */
 static void nodeGetCoord(
-  Rtree *pRtree, 
-  RtreeNode *pNode, 
-  int iCell,
-  int iCoord,
-  RtreeCoord *pCoord           /* Space to write result to */
+  Rtree *pRtree,               /* The overall R-Tree */
+  RtreeNode *pNode,            /* The node from which to extract a coordinate */
+  int iCell,                   /* The index of the cell within the node */
+  int iCoord,                  /* Which coordinate to extract */
+  RtreeCoord *pCoord           /* OUT: Space to write result to */
 ){
   readCoord(&pNode->zData[12 + pRtree->nBytesPerCell*iCell + 4*iCoord], pCoord);
 }
@@ -142912,15 +145378,20 @@ static void nodeGetCoord(
 ** to by pCell with the results.
 */
 static void nodeGetCell(
-  Rtree *pRtree, 
-  RtreeNode *pNode, 
-  int iCell,
-  RtreeCell *pCell
-){
-  int ii;
+  Rtree *pRtree,               /* The overall R-Tree */
+  RtreeNode *pNode,            /* The node containing the cell to be read */
+  int iCell,                   /* Index of the cell within the node */
+  RtreeCell *pCell             /* OUT: Write the cell contents here */
+){
+  u8 *pData;
+  u8 *pEnd;
+  RtreeCoord *pCoord;
   pCell->iRowid = nodeGetRowid(pRtree, pNode, iCell);
-  for(ii=0; ii<pRtree->nDim*2; ii++){
-    nodeGetCoord(pRtree, pNode, iCell, ii, &pCell->aCoord[ii]);
+  pData = pNode->zData + (12 + pRtree->nBytesPerCell*iCell);
+  pEnd = pData + pRtree->nDim*8;
+  pCoord = pCell->aCoord;
+  for(; pData<pEnd; pData+=4, pCoord++){
+    readCoord(pData, pCoord);
   }
 }
 
@@ -143046,10 +145517,10 @@ static void freeCursorConstraints(RtreeCursor *pCsr){
   if( pCsr->aConstraint ){
     int i;                        /* Used to iterate through constraint array */
     for(i=0; i<pCsr->nConstraint; i++){
-      sqlite3_rtree_geometry *pGeom = pCsr->aConstraint[i].pGeom;
-      if( pGeom ){
-        if( pGeom->xDelUser ) pGeom->xDelUser(pGeom->pUser);
-        sqlite3_free(pGeom);
+      sqlite3_rtree_query_info *pInfo = pCsr->aConstraint[i].pInfo;
+      if( pInfo ){
+        if( pInfo->xDelUser ) pInfo->xDelUser(pInfo->pUser);
+        sqlite3_free(pInfo);
       }
     }
     sqlite3_free(pCsr->aConstraint);
@@ -143062,12 +145533,13 @@ static void freeCursorConstraints(RtreeCursor *pCsr){
 */
 static int rtreeClose(sqlite3_vtab_cursor *cur){
   Rtree *pRtree = (Rtree *)(cur->pVtab);
-  int rc;
+  int ii;
   RtreeCursor *pCsr = (RtreeCursor *)cur;
   freeCursorConstraints(pCsr);
-  rc = nodeRelease(pRtree, pCsr->pNode);
+  sqlite3_free(pCsr->aPoint);
+  for(ii=0; ii<RTREE_CACHE_SZ; ii++) nodeRelease(pRtree, pCsr->aNode[ii]);
   sqlite3_free(pCsr);
-  return rc;
+  return SQLITE_OK;
 }
 
 /*
@@ -143078,194 +145550,164 @@ static int rtreeClose(sqlite3_vtab_cursor *cur){
 */
 static int rtreeEof(sqlite3_vtab_cursor *cur){
   RtreeCursor *pCsr = (RtreeCursor *)cur;
-  return (pCsr->pNode==0);
+  return pCsr->atEOF;
+}
+
+/*
+** Convert raw bits from the on-disk RTree record into a coordinate value.
+** The on-disk format is big-endian and needs to be converted for little-
+** endian platforms.  The on-disk record stores integer coordinates if
+** eInt is true and it stores 32-bit floating point records if eInt is
+** false.  a[] is the four bytes of the on-disk record to be decoded.
+** Store the results in "r".
+**
+** There are three versions of this macro, one each for little-endian and
+** big-endian processors and a third generic implementation.  The endian-
+** specific implementations are much faster and are preferred if the
+** processor endianness is known at compile-time.  The SQLITE_BYTEORDER
+** macro is part of sqliteInt.h and hence the endian-specific
+** implementation will only be used if this module is compiled as part
+** of the amalgamation.
+*/
+#if defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==1234
+#define RTREE_DECODE_COORD(eInt, a, r) {                        \
+    RtreeCoord c;    /* Coordinate decoded */                   \
+    memcpy(&c.u,a,4);                                           \
+    c.u = ((c.u>>24)&0xff)|((c.u>>8)&0xff00)|                   \
+          ((c.u&0xff)<<24)|((c.u&0xff00)<<8);                   \
+    r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \
+}
+#elif defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==4321
+#define RTREE_DECODE_COORD(eInt, a, r) {                        \
+    RtreeCoord c;    /* Coordinate decoded */                   \
+    memcpy(&c.u,a,4);                                           \
+    r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \
 }
+#else
+#define RTREE_DECODE_COORD(eInt, a, r) {                        \
+    RtreeCoord c;    /* Coordinate decoded */                   \
+    c.u = ((u32)a[0]<<24) + ((u32)a[1]<<16)                     \
+           +((u32)a[2]<<8) + a[3];                              \
+    r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \
+}
+#endif
 
 /*
-** The r-tree constraint passed as the second argument to this function is
-** guaranteed to be a MATCH constraint.
+** Check the RTree node or entry given by pCellData and p against the MATCH
+** constraint pConstraint.  
 */
-static int testRtreeGeom(
-  Rtree *pRtree,                  /* R-Tree object */
-  RtreeConstraint *pConstraint,   /* MATCH constraint to test */
-  RtreeCell *pCell,               /* Cell to test */
-  int *pbRes                      /* OUT: Test result */
+static int rtreeCallbackConstraint(
+  RtreeConstraint *pConstraint,  /* The constraint to test */
+  int eInt,                      /* True if RTree holding integer coordinates */
+  u8 *pCellData,                 /* Raw cell content */
+  RtreeSearchPoint *pSearch,     /* Container of this cell */
+  sqlite3_rtree_dbl *prScore,    /* OUT: score for the cell */
+  int *peWithin                  /* OUT: visibility of the cell */
 ){
-  int i;
-  RtreeDValue aCoord[RTREE_MAX_DIMENSIONS*2];
-  int nCoord = pRtree->nDim*2;
+  int i;                                                /* Loop counter */
+  sqlite3_rtree_query_info *pInfo = pConstraint->pInfo; /* Callback info */
+  int nCoord = pInfo->nCoord;                           /* No. of coordinates */
+  int rc;                                             /* Callback return code */
+  sqlite3_rtree_dbl aCoord[RTREE_MAX_DIMENSIONS*2];   /* Decoded coordinates */
 
-  assert( pConstraint->op==RTREE_MATCH );
-  assert( pConstraint->pGeom );
+  assert( pConstraint->op==RTREE_MATCH || pConstraint->op==RTREE_QUERY );
+  assert( nCoord==2 || nCoord==4 || nCoord==6 || nCoord==8 || nCoord==10 );
 
-  for(i=0; i<nCoord; i++){
-    aCoord[i] = DCOORD(pCell->aCoord[i]);
+  if( pConstraint->op==RTREE_QUERY && pSearch->iLevel==1 ){
+    pInfo->iRowid = readInt64(pCellData);
   }
-  return pConstraint->xGeom(pConstraint->pGeom, nCoord, aCoord, pbRes);
-}
-
-/* 
-** Cursor pCursor currently points to a cell in a non-leaf page.
-** Set *pbEof to true if the sub-tree headed by the cell is filtered
-** (excluded) by the constraints in the pCursor->aConstraint[] 
-** array, or false otherwise.
-**
-** Return SQLITE_OK if successful or an SQLite error code if an error
-** occurs within a geometry callback.
-*/
-static int testRtreeCell(Rtree *pRtree, RtreeCursor *pCursor, int *pbEof){
-  RtreeCell cell;
-  int ii;
-  int bRes = 0;
-  int rc = SQLITE_OK;
-
-  nodeGetCell(pRtree, pCursor->pNode, pCursor->iCell, &cell);
-  for(ii=0; bRes==0 && ii<pCursor->nConstraint; ii++){
-    RtreeConstraint *p = &pCursor->aConstraint[ii];
-    RtreeDValue cell_min = DCOORD(cell.aCoord[(p->iCoord>>1)*2]);
-    RtreeDValue cell_max = DCOORD(cell.aCoord[(p->iCoord>>1)*2+1]);
-
-    assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE 
-        || p->op==RTREE_GT || p->op==RTREE_EQ || p->op==RTREE_MATCH
-    );
-
-    switch( p->op ){
-      case RTREE_LE: case RTREE_LT: 
-        bRes = p->rValue<cell_min; 
-        break;
-
-      case RTREE_GE: case RTREE_GT: 
-        bRes = p->rValue>cell_max; 
-        break;
-
-      case RTREE_EQ:
-        bRes = (p->rValue>cell_max || p->rValue<cell_min);
-        break;
-
-      default: {
-        assert( p->op==RTREE_MATCH );
-        rc = testRtreeGeom(pRtree, p, &cell, &bRes);
-        bRes = !bRes;
-        break;
-      }
+  pCellData += 8;
+  for(i=0; i<nCoord; i++, pCellData += 4){
+    RTREE_DECODE_COORD(eInt, pCellData, aCoord[i]);
+  }
+  if( pConstraint->op==RTREE_MATCH ){
+    rc = pConstraint->u.xGeom((sqlite3_rtree_geometry*)pInfo,
+                              nCoord, aCoord, &i);
+    if( i==0 ) *peWithin = NOT_WITHIN;
+    *prScore = RTREE_ZERO;
+  }else{
+    pInfo->aCoord = aCoord;
+    pInfo->iLevel = pSearch->iLevel - 1;
+    pInfo->rScore = pInfo->rParentScore = pSearch->rScore;
+    pInfo->eWithin = pInfo->eParentWithin = pSearch->eWithin;
+    rc = pConstraint->u.xQueryFunc(pInfo);
+    if( pInfo->eWithin<*peWithin ) *peWithin = pInfo->eWithin;
+    if( pInfo->rScore<*prScore || *prScore<RTREE_ZERO ){
+      *prScore = pInfo->rScore;
     }
   }
-
-  *pbEof = bRes;
   return rc;
 }
 
 /* 
-** Test if the cell that cursor pCursor currently points to
-** would be filtered (excluded) by the constraints in the 
-** pCursor->aConstraint[] array. If so, set *pbEof to true before
-** returning. If the cell is not filtered (excluded) by the constraints,
-** set pbEof to zero.
-**
-** Return SQLITE_OK if successful or an SQLite error code if an error
-** occurs within a geometry callback.
-**
-** This function assumes that the cell is part of a leaf node.
+** Check the internal RTree node given by pCellData against constraint p.
+** If this constraint cannot be satisfied by any child within the node,
+** set *peWithin to NOT_WITHIN.
 */
-static int testRtreeEntry(Rtree *pRtree, RtreeCursor *pCursor, int *pbEof){
-  RtreeCell cell;
-  int ii;
-  *pbEof = 0;
+static void rtreeNonleafConstraint(
+  RtreeConstraint *p,        /* The constraint to test */
+  int eInt,                  /* True if RTree holds integer coordinates */
+  u8 *pCellData,             /* Raw cell content as appears on disk */
+  int *peWithin              /* Adjust downward, as appropriate */
+){
+  sqlite3_rtree_dbl val;     /* Coordinate value convert to a double */
 
-  nodeGetCell(pRtree, pCursor->pNode, pCursor->iCell, &cell);
-  for(ii=0; ii<pCursor->nConstraint; ii++){
-    RtreeConstraint *p = &pCursor->aConstraint[ii];
-    RtreeDValue coord = DCOORD(cell.aCoord[p->iCoord]);
-    int res;
-    assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE 
-        || p->op==RTREE_GT || p->op==RTREE_EQ || p->op==RTREE_MATCH
-    );
-    switch( p->op ){
-      case RTREE_LE: res = (coord<=p->rValue); break;
-      case RTREE_LT: res = (coord<p->rValue);  break;
-      case RTREE_GE: res = (coord>=p->rValue); break;
-      case RTREE_GT: res = (coord>p->rValue);  break;
-      case RTREE_EQ: res = (coord==p->rValue); break;
-      default: {
-        int rc;
-        assert( p->op==RTREE_MATCH );
-        rc = testRtreeGeom(pRtree, p, &cell, &res);
-        if( rc!=SQLITE_OK ){
-          return rc;
-        }
-        break;
-      }
-    }
+  /* p->iCoord might point to either a lower or upper bound coordinate
+  ** in a coordinate pair.  But make pCellData point to the lower bound.
+  */
+  pCellData += 8 + 4*(p->iCoord&0xfe);
 
-    if( !res ){
-      *pbEof = 1;
-      return SQLITE_OK;
-    }
-  }
+  assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE 
+      || p->op==RTREE_GT || p->op==RTREE_EQ );
+  switch( p->op ){
+    case RTREE_LE:
+    case RTREE_LT:
+    case RTREE_EQ:
+      RTREE_DECODE_COORD(eInt, pCellData, val);
+      /* val now holds the lower bound of the coordinate pair */
+      if( p->u.rValue>=val ) return;
+      if( p->op!=RTREE_EQ ) break;  /* RTREE_LE and RTREE_LT end here */
+      /* Fall through for the RTREE_EQ case */
 
-  return SQLITE_OK;
+    default: /* RTREE_GT or RTREE_GE,  or fallthrough of RTREE_EQ */
+      pCellData += 4;
+      RTREE_DECODE_COORD(eInt, pCellData, val);
+      /* val now holds the upper bound of the coordinate pair */
+      if( p->u.rValue<=val ) return;
+  }
+  *peWithin = NOT_WITHIN;
 }
 
 /*
-** Cursor pCursor currently points at a node that heads a sub-tree of
-** height iHeight (if iHeight==0, then the node is a leaf). Descend
-** to point to the left-most cell of the sub-tree that matches the 
-** configured constraints.
+** Check the leaf RTree cell given by pCellData against constraint p.
+** If this constraint is not satisfied, set *peWithin to NOT_WITHIN.
+** If the constraint is satisfied, leave *peWithin unchanged.
+**
+** The constraint is of the form:  xN op $val
+**
+** The op is given by p->op.  The xN is p->iCoord-th coordinate in
+** pCellData.  $val is given by p->u.rValue.
 */
-static int descendToCell(
-  Rtree *pRtree, 
-  RtreeCursor *pCursor, 
-  int iHeight,
-  int *pEof                 /* OUT: Set to true if cannot descend */
+static void rtreeLeafConstraint(
+  RtreeConstraint *p,        /* The constraint to test */
+  int eInt,                  /* True if RTree holds integer coordinates */
+  u8 *pCellData,             /* Raw cell content as appears on disk */
+  int *peWithin              /* Adjust downward, as appropriate */
 ){
-  int isEof;
-  int rc;
-  int ii;
-  RtreeNode *pChild;
-  sqlite3_int64 iRowid;
-
-  RtreeNode *pSavedNode = pCursor->pNode;
-  int iSavedCell = pCursor->iCell;
-
-  assert( iHeight>=0 );
-
-  if( iHeight==0 ){
-    rc = testRtreeEntry(pRtree, pCursor, &isEof);
-  }else{
-    rc = testRtreeCell(pRtree, pCursor, &isEof);
-  }
-  if( rc!=SQLITE_OK || isEof || iHeight==0 ){
-    goto descend_to_cell_out;
-  }
-
-  iRowid = nodeGetRowid(pRtree, pCursor->pNode, pCursor->iCell);
-  rc = nodeAcquire(pRtree, iRowid, pCursor->pNode, &pChild);
-  if( rc!=SQLITE_OK ){
-    goto descend_to_cell_out;
-  }
-
-  nodeRelease(pRtree, pCursor->pNode);
-  pCursor->pNode = pChild;
-  isEof = 1;
-  for(ii=0; isEof && ii<NCELL(pChild); ii++){
-    pCursor->iCell = ii;
-    rc = descendToCell(pRtree, pCursor, iHeight-1, &isEof);
-    if( rc!=SQLITE_OK ){
-      goto descend_to_cell_out;
-    }
-  }
+  RtreeDValue xN;      /* Coordinate value converted to a double */
 
-  if( isEof ){
-    assert( pCursor->pNode==pChild );
-    nodeReference(pSavedNode);
-    nodeRelease(pRtree, pChild);
-    pCursor->pNode = pSavedNode;
-    pCursor->iCell = iSavedCell;
+  assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE 
+      || p->op==RTREE_GT || p->op==RTREE_EQ );
+  pCellData += 8 + p->iCoord*4;
+  RTREE_DECODE_COORD(eInt, pCellData, xN);
+  switch( p->op ){
+    case RTREE_LE: if( xN <= p->u.rValue ) return;  break;
+    case RTREE_LT: if( xN <  p->u.rValue ) return;  break;
+    case RTREE_GE: if( xN >= p->u.rValue ) return;  break;
+    case RTREE_GT: if( xN >  p->u.rValue ) return;  break;
+    default:       if( xN == p->u.rValue ) return;  break;
   }
-
-descend_to_cell_out:
-  *pEof = isEof;
-  return rc;
+  *peWithin = NOT_WITHIN;
 }
 
 /*
@@ -143280,6 +145722,7 @@ static int nodeRowidIndex(
 ){
   int ii;
   int nCell = NCELL(pNode);
+  assert( nCell<200 );
   for(ii=0; ii<nCell; ii++){
     if( nodeGetRowid(pRtree, pNode, ii)==iRowid ){
       *piIndex = ii;
@@ -143302,48 +145745,302 @@ static int nodeParentIndex(Rtree *pRtree, RtreeNode *pNode, int *piIndex){
   return SQLITE_OK;
 }
 
-/* 
-** Rtree virtual table module xNext method.
+/*
+** Compare two search points.  Return negative, zero, or positive if the first
+** is less than, equal to, or greater than the second.
+**
+** The rScore is the primary key.  Smaller rScore values come first.
+** If the rScore is a tie, then use iLevel as the tie breaker with smaller
+** iLevel values coming first.  In this way, if rScore is the same for all
+** SearchPoints, then iLevel becomes the deciding factor and the result
+** is a depth-first search, which is the desired default behavior.
 */
-static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){
-  Rtree *pRtree = (Rtree *)(pVtabCursor->pVtab);
-  RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor;
-  int rc = SQLITE_OK;
+static int rtreeSearchPointCompare(
+  const RtreeSearchPoint *pA,
+  const RtreeSearchPoint *pB
+){
+  if( pA->rScore<pB->rScore ) return -1;
+  if( pA->rScore>pB->rScore ) return +1;
+  if( pA->iLevel<pB->iLevel ) return -1;
+  if( pA->iLevel>pB->iLevel ) return +1;
+  return 0;
+}
 
-  /* RtreeCursor.pNode must not be NULL. If is is NULL, then this cursor is
-  ** already at EOF. It is against the rules to call the xNext() method of
-  ** a cursor that has already reached EOF.
-  */
-  assert( pCsr->pNode );
-
-  if( pCsr->iStrategy==1 ){
-    /* This "scan" is a direct lookup by rowid. There is no next entry. */
-    nodeRelease(pRtree, pCsr->pNode);
-    pCsr->pNode = 0;
-  }else{
-    /* Move to the next entry that matches the configured constraints. */
-    int iHeight = 0;
-    while( pCsr->pNode ){
-      RtreeNode *pNode = pCsr->pNode;
-      int nCell = NCELL(pNode);
-      for(pCsr->iCell++; pCsr->iCell<nCell; pCsr->iCell++){
-        int isEof;
-        rc = descendToCell(pRtree, pCsr, iHeight, &isEof);
-        if( rc!=SQLITE_OK || !isEof ){
-          return rc;
+/*
+** Interchange to search points in a cursor.
+*/
+static void rtreeSearchPointSwap(RtreeCursor *p, int i, int j){
+  RtreeSearchPoint t = p->aPoint[i];
+  assert( i<j );
+  p->aPoint[i] = p->aPoint[j];
+  p->aPoint[j] = t;
+  i++; j++;
+  if( i<RTREE_CACHE_SZ ){
+    if( j>=RTREE_CACHE_SZ ){
+      nodeRelease(RTREE_OF_CURSOR(p), p->aNode[i]);
+      p->aNode[i] = 0;
+    }else{
+      RtreeNode *pTemp = p->aNode[i];
+      p->aNode[i] = p->aNode[j];
+      p->aNode[j] = pTemp;
+    }
+  }
+}
+
+/*
+** Return the search point with the lowest current score.
+*/
+static RtreeSearchPoint *rtreeSearchPointFirst(RtreeCursor *pCur){
+  return pCur->bPoint ? &pCur->sPoint : pCur->nPoint ? pCur->aPoint : 0;
+}
+
+/*
+** Get the RtreeNode for the search point with the lowest score.
+*/
+static RtreeNode *rtreeNodeOfFirstSearchPoint(RtreeCursor *pCur, int *pRC){
+  sqlite3_int64 id;
+  int ii = 1 - pCur->bPoint;
+  assert( ii==0 || ii==1 );
+  assert( pCur->bPoint || pCur->nPoint );
+  if( pCur->aNode[ii]==0 ){
+    assert( pRC!=0 );
+    id = ii ? pCur->aPoint[0].id : pCur->sPoint.id;
+    *pRC = nodeAcquire(RTREE_OF_CURSOR(pCur), id, 0, &pCur->aNode[ii]);
+  }
+  return pCur->aNode[ii];
+}
+
+/*
+** Push a new element onto the priority queue
+*/
+static RtreeSearchPoint *rtreeEnqueue(
+  RtreeCursor *pCur,    /* The cursor */
+  RtreeDValue rScore,   /* Score for the new search point */
+  u8 iLevel             /* Level for the new search point */
+){
+  int i, j;
+  RtreeSearchPoint *pNew;
+  if( pCur->nPoint>=pCur->nPointAlloc ){
+    int nNew = pCur->nPointAlloc*2 + 8;
+    pNew = sqlite3_realloc(pCur->aPoint, nNew*sizeof(pCur->aPoint[0]));
+    if( pNew==0 ) return 0;
+    pCur->aPoint = pNew;
+    pCur->nPointAlloc = nNew;
+  }
+  i = pCur->nPoint++;
+  pNew = pCur->aPoint + i;
+  pNew->rScore = rScore;
+  pNew->iLevel = iLevel;
+  assert( iLevel>=0 && iLevel<=RTREE_MAX_DEPTH );
+  while( i>0 ){
+    RtreeSearchPoint *pParent;
+    j = (i-1)/2;
+    pParent = pCur->aPoint + j;
+    if( rtreeSearchPointCompare(pNew, pParent)>=0 ) break;
+    rtreeSearchPointSwap(pCur, j, i);
+    i = j;
+    pNew = pParent;
+  }
+  return pNew;
+}
+
+/*
+** Allocate a new RtreeSearchPoint and return a pointer to it.  Return
+** NULL if malloc fails.
+*/
+static RtreeSearchPoint *rtreeSearchPointNew(
+  RtreeCursor *pCur,    /* The cursor */
+  RtreeDValue rScore,   /* Score for the new search point */
+  u8 iLevel             /* Level for the new search point */
+){
+  RtreeSearchPoint *pNew, *pFirst;
+  pFirst = rtreeSearchPointFirst(pCur);
+  pCur->anQueue[iLevel]++;
+  if( pFirst==0
+   || pFirst->rScore>rScore 
+   || (pFirst->rScore==rScore && pFirst->iLevel>iLevel)
+  ){
+    if( pCur->bPoint ){
+      int ii;
+      pNew = rtreeEnqueue(pCur, rScore, iLevel);
+      if( pNew==0 ) return 0;
+      ii = (int)(pNew - pCur->aPoint) + 1;
+      if( ii<RTREE_CACHE_SZ ){
+        assert( pCur->aNode[ii]==0 );
+        pCur->aNode[ii] = pCur->aNode[0];
+       }else{
+        nodeRelease(RTREE_OF_CURSOR(pCur), pCur->aNode[0]);
+      }
+      pCur->aNode[0] = 0;
+      *pNew = pCur->sPoint;
+    }
+    pCur->sPoint.rScore = rScore;
+    pCur->sPoint.iLevel = iLevel;
+    pCur->bPoint = 1;
+    return &pCur->sPoint;
+  }else{
+    return rtreeEnqueue(pCur, rScore, iLevel);
+  }
+}
+
+#if 0
+/* Tracing routines for the RtreeSearchPoint queue */
+static void tracePoint(RtreeSearchPoint *p, int idx, RtreeCursor *pCur){
+  if( idx<0 ){ printf(" s"); }else{ printf("%2d", idx); }
+  printf(" %d.%05lld.%02d %g %d",
+    p->iLevel, p->id, p->iCell, p->rScore, p->eWithin
+  );
+  idx++;
+  if( idx<RTREE_CACHE_SZ ){
+    printf(" %p\n", pCur->aNode[idx]);
+  }else{
+    printf("\n");
+  }
+}
+static void traceQueue(RtreeCursor *pCur, const char *zPrefix){
+  int ii;
+  printf("=== %9s ", zPrefix);
+  if( pCur->bPoint ){
+    tracePoint(&pCur->sPoint, -1, pCur);
+  }
+  for(ii=0; ii<pCur->nPoint; ii++){
+    if( ii>0 || pCur->bPoint ) printf("              ");
+    tracePoint(&pCur->aPoint[ii], ii, pCur);
+  }
+}
+# define RTREE_QUEUE_TRACE(A,B) traceQueue(A,B)
+#else
+# define RTREE_QUEUE_TRACE(A,B)   /* no-op */
+#endif
+
+/* Remove the search point with the lowest current score.
+*/
+static void rtreeSearchPointPop(RtreeCursor *p){
+  int i, j, k, n;
+  i = 1 - p->bPoint;
+  assert( i==0 || i==1 );
+  if( p->aNode[i] ){
+    nodeRelease(RTREE_OF_CURSOR(p), p->aNode[i]);
+    p->aNode[i] = 0;
+  }
+  if( p->bPoint ){
+    p->anQueue[p->sPoint.iLevel]--;
+    p->bPoint = 0;
+  }else if( p->nPoint ){
+    p->anQueue[p->aPoint[0].iLevel]--;
+    n = --p->nPoint;
+    p->aPoint[0] = p->aPoint[n];
+    if( n<RTREE_CACHE_SZ-1 ){
+      p->aNode[1] = p->aNode[n+1];
+      p->aNode[n+1] = 0;
+    }
+    i = 0;
+    while( (j = i*2+1)<n ){
+      k = j+1;
+      if( k<n && rtreeSearchPointCompare(&p->aPoint[k], &p->aPoint[j])<0 ){
+        if( rtreeSearchPointCompare(&p->aPoint[k], &p->aPoint[i])<0 ){
+          rtreeSearchPointSwap(p, i, k);
+          i = k;
+        }else{
+          break;
+        }
+      }else{
+        if( rtreeSearchPointCompare(&p->aPoint[j], &p->aPoint[i])<0 ){
+          rtreeSearchPointSwap(p, i, j);
+          i = j;
+        }else{
+          break;
         }
       }
-      pCsr->pNode = pNode->pParent;
-      rc = nodeParentIndex(pRtree, pNode, &pCsr->iCell);
-      if( rc!=SQLITE_OK ){
-        return rc;
+    }
+  }
+}
+
+
+/*
+** Continue the search on cursor pCur until the front of the queue
+** contains an entry suitable for returning as a result-set row,
+** or until the RtreeSearchPoint queue is empty, indicating that the
+** query has completed.
+*/
+static int rtreeStepToLeaf(RtreeCursor *pCur){
+  RtreeSearchPoint *p;
+  Rtree *pRtree = RTREE_OF_CURSOR(pCur);
+  RtreeNode *pNode;
+  int eWithin;
+  int rc = SQLITE_OK;
+  int nCell;
+  int nConstraint = pCur->nConstraint;
+  int ii;
+  int eInt;
+  RtreeSearchPoint x;
+
+  eInt = pRtree->eCoordType==RTREE_COORD_INT32;
+  while( (p = rtreeSearchPointFirst(pCur))!=0 && p->iLevel>0 ){
+    pNode = rtreeNodeOfFirstSearchPoint(pCur, &rc);
+    if( rc ) return rc;
+    nCell = NCELL(pNode);
+    assert( nCell<200 );
+    while( p->iCell<nCell ){
+      sqlite3_rtree_dbl rScore = (sqlite3_rtree_dbl)-1;
+      u8 *pCellData = pNode->zData + (4+pRtree->nBytesPerCell*p->iCell);
+      eWithin = FULLY_WITHIN;
+      for(ii=0; ii<nConstraint; ii++){
+        RtreeConstraint *pConstraint = pCur->aConstraint + ii;
+        if( pConstraint->op>=RTREE_MATCH ){
+          rc = rtreeCallbackConstraint(pConstraint, eInt, pCellData, p,
+                                       &rScore, &eWithin);
+          if( rc ) return rc;
+        }else if( p->iLevel==1 ){
+          rtreeLeafConstraint(pConstraint, eInt, pCellData, &eWithin);
+        }else{
+          rtreeNonleafConstraint(pConstraint, eInt, pCellData, &eWithin);
+        }
+        if( eWithin==NOT_WITHIN ) break;
       }
-      nodeReference(pCsr->pNode);
-      nodeRelease(pRtree, pNode);
-      iHeight++;
+      p->iCell++;
+      if( eWithin==NOT_WITHIN ) continue;
+      x.iLevel = p->iLevel - 1;
+      if( x.iLevel ){
+        x.id = readInt64(pCellData);
+        x.iCell = 0;
+      }else{
+        x.id = p->id;
+        x.iCell = p->iCell - 1;
+      }
+      if( p->iCell>=nCell ){
+        RTREE_QUEUE_TRACE(pCur, "POP-S:");
+        rtreeSearchPointPop(pCur);
+      }
+      if( rScore<RTREE_ZERO ) rScore = RTREE_ZERO;
+      p = rtreeSearchPointNew(pCur, rScore, x.iLevel);
+      if( p==0 ) return SQLITE_NOMEM;
+      p->eWithin = eWithin;
+      p->id = x.id;
+      p->iCell = x.iCell;
+      RTREE_QUEUE_TRACE(pCur, "PUSH-S:");
+      break;
+    }
+    if( p->iCell>=nCell ){
+      RTREE_QUEUE_TRACE(pCur, "POP-Se:");
+      rtreeSearchPointPop(pCur);
     }
   }
+  pCur->atEOF = p==0;
+  return SQLITE_OK;
+}
+
+/* 
+** Rtree virtual table module xNext method.
+*/
+static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){
+  RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor;
+  int rc = SQLITE_OK;
 
+  /* Move to the next entry that matches the configured constraints. */
+  RTREE_QUEUE_TRACE(pCsr, "POP-Nx:");
+  rtreeSearchPointPop(pCsr);
+  rc = rtreeStepToLeaf(pCsr);
   return rc;
 }
 
@@ -143351,13 +146048,14 @@ static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){
 ** Rtree virtual table module xRowid method.
 */
 static int rtreeRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *pRowid){
-  Rtree *pRtree = (Rtree *)pVtabCursor->pVtab;
   RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor;
-
-  assert(pCsr->pNode);
-  *pRowid = nodeGetRowid(pRtree, pCsr->pNode, pCsr->iCell);
-
-  return SQLITE_OK;
+  RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr);
+  int rc = SQLITE_OK;
+  RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc);
+  if( rc==SQLITE_OK && p ){
+    *pRowid = nodeGetRowid(RTREE_OF_CURSOR(pCsr), pNode, p->iCell);
+  }
+  return rc;
 }
 
 /* 
@@ -143366,13 +146064,18 @@ static int rtreeRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *pRowid){
 static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){
   Rtree *pRtree = (Rtree *)cur->pVtab;
   RtreeCursor *pCsr = (RtreeCursor *)cur;
+  RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr);
+  RtreeCoord c;
+  int rc = SQLITE_OK;
+  RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc);
 
+  if( rc ) return rc;
+  if( p==0 ) return SQLITE_OK;
   if( i==0 ){
-    i64 iRowid = nodeGetRowid(pRtree, pCsr->pNode, pCsr->iCell);
-    sqlite3_result_int64(ctx, iRowid);
+    sqlite3_result_int64(ctx, nodeGetRowid(pRtree, pNode, p->iCell));
   }else{
-    RtreeCoord c;
-    nodeGetCoord(pRtree, pCsr->pNode, pCsr->iCell, i-1, &c);
+    if( rc ) return rc;
+    nodeGetCoord(pRtree, pNode, p->iCell, i-1, &c);
 #ifndef SQLITE_RTREE_INT_ONLY
     if( pRtree->eCoordType==RTREE_COORD_REAL32 ){
       sqlite3_result_double(ctx, c.f);
@@ -143383,7 +146086,6 @@ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){
       sqlite3_result_int(ctx, c.i);
     }
   }
-
   return SQLITE_OK;
 }
 
@@ -143394,12 +146096,18 @@ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){
 ** *ppLeaf to 0 and return SQLITE_OK. If an error occurs, set *ppLeaf
 ** to zero and return an SQLite error code.
 */
-static int findLeafNode(Rtree *pRtree, i64 iRowid, RtreeNode **ppLeaf){
+static int findLeafNode(
+  Rtree *pRtree,              /* RTree to search */
+  i64 iRowid,                 /* The rowid searching for */
+  RtreeNode **ppLeaf,         /* Write the node here */
+  sqlite3_int64 *piNode       /* Write the node-id here */
+){
   int rc;
   *ppLeaf = 0;
   sqlite3_bind_int64(pRtree->pReadRowid, 1, iRowid);
   if( sqlite3_step(pRtree->pReadRowid)==SQLITE_ROW ){
     i64 iNode = sqlite3_column_int64(pRtree->pReadRowid, 0);
+    if( piNode ) *piNode = iNode;
     rc = nodeAcquire(pRtree, iNode, 0, ppLeaf);
     sqlite3_reset(pRtree->pReadRowid);
   }else{
@@ -143415,9 +146123,10 @@ static int findLeafNode(Rtree *pRtree, i64 iRowid, RtreeNode **ppLeaf){
 ** operator.
 */
 static int deserializeGeometry(sqlite3_value *pValue, RtreeConstraint *pCons){
-  RtreeMatchArg *p;
-  sqlite3_rtree_geometry *pGeom;
-  int nBlob;
+  RtreeMatchArg *pBlob;              /* BLOB returned by geometry function */
+  sqlite3_rtree_query_info *pInfo;   /* Callback information */
+  int nBlob;                         /* Size of the geometry function blob */
+  int nExpected;                     /* Expected size of the BLOB */
 
   /* Check that value is actually a blob. */
   if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR;
@@ -143430,27 +146139,29 @@ static int deserializeGeometry(sqlite3_value *pValue, RtreeConstraint *pCons){
     return SQLITE_ERROR;
   }
 
-  pGeom = (sqlite3_rtree_geometry *)sqlite3_malloc(
-      sizeof(sqlite3_rtree_geometry) + nBlob
-  );
-  if( !pGeom ) return SQLITE_NOMEM;
-  memset(pGeom, 0, sizeof(sqlite3_rtree_geometry));
-  p = (RtreeMatchArg *)&pGeom[1];
+  pInfo = (sqlite3_rtree_query_info*)sqlite3_malloc( sizeof(*pInfo)+nBlob );
+  if( !pInfo ) return SQLITE_NOMEM;
+  memset(pInfo, 0, sizeof(*pInfo));
+  pBlob = (RtreeMatchArg*)&pInfo[1];
 
-  memcpy(p, sqlite3_value_blob(pValue), nBlob);
-  if( p->magic!=RTREE_GEOMETRY_MAGIC 
-   || nBlob!=(int)(sizeof(RtreeMatchArg) + (p->nParam-1)*sizeof(RtreeDValue))
-  ){
-    sqlite3_free(pGeom);
+  memcpy(pBlob, sqlite3_value_blob(pValue), nBlob);
+  nExpected = (int)(sizeof(RtreeMatchArg) +
+                    (pBlob->nParam-1)*sizeof(RtreeDValue));
+  if( pBlob->magic!=RTREE_GEOMETRY_MAGIC || nBlob!=nExpected ){
+    sqlite3_free(pInfo);
     return SQLITE_ERROR;
   }
+  pInfo->pContext = pBlob->cb.pContext;
+  pInfo->nParam = pBlob->nParam;
+  pInfo->aParam = pBlob->aParam;
 
-  pGeom->pContext = p->pContext;
-  pGeom->nParam = p->nParam;
-  pGeom->aParam = p->aParam;
-
-  pCons->xGeom = p->xGeom;
-  pCons->pGeom = pGeom;
+  if( pBlob->cb.xGeom ){
+    pCons->u.xGeom = pBlob->cb.xGeom;
+  }else{
+    pCons->op = RTREE_QUERY;
+    pCons->u.xQueryFunc = pBlob->cb.xQueryFunc;
+  }
+  pCons->pInfo = pInfo;
   return SQLITE_OK;
 }
 
@@ -143464,44 +146175,59 @@ static int rtreeFilter(
 ){
   Rtree *pRtree = (Rtree *)pVtabCursor->pVtab;
   RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor;
-
   RtreeNode *pRoot = 0;
   int ii;
   int rc = SQLITE_OK;
+  int iCell = 0;
 
   rtreeReference(pRtree);
 
+  /* Reset the cursor to the same state as rtreeOpen() leaves it in. */
   freeCursorConstraints(pCsr);
-  pCsr->iStrategy = idxNum;
+  sqlite3_free(pCsr->aPoint);
+  memset(pCsr, 0, sizeof(RtreeCursor));
+  pCsr->base.pVtab = (sqlite3_vtab*)pRtree;
 
+  pCsr->iStrategy = idxNum;
   if( idxNum==1 ){
     /* Special case - lookup by rowid. */
     RtreeNode *pLeaf;        /* Leaf on which the required cell resides */
+    RtreeSearchPoint *p;     /* Search point for the the leaf */
     i64 iRowid = sqlite3_value_int64(argv[0]);
-    rc = findLeafNode(pRtree, iRowid, &pLeaf);
-    pCsr->pNode = pLeaf; 
-    if( pLeaf ){
-      assert( rc==SQLITE_OK );
-      rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &pCsr->iCell);
+    i64 iNode = 0;
+    rc = findLeafNode(pRtree, iRowid, &pLeaf, &iNode);
+    if( rc==SQLITE_OK && pLeaf!=0 ){
+      p = rtreeSearchPointNew(pCsr, RTREE_ZERO, 0);
+      assert( p!=0 );  /* Always returns pCsr->sPoint */
+      pCsr->aNode[0] = pLeaf;
+      p->id = iNode;
+      p->eWithin = PARTLY_WITHIN;
+      rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &iCell);
+      p->iCell = iCell;
+      RTREE_QUEUE_TRACE(pCsr, "PUSH-F1:");
+    }else{
+      pCsr->atEOF = 1;
     }
   }else{
     /* Normal case - r-tree scan. Set up the RtreeCursor.aConstraint array 
     ** with the configured constraints. 
     */
-    if( argc>0 ){
+    rc = nodeAcquire(pRtree, 1, 0, &pRoot);
+    if( rc==SQLITE_OK && argc>0 ){
       pCsr->aConstraint = sqlite3_malloc(sizeof(RtreeConstraint)*argc);
       pCsr->nConstraint = argc;
       if( !pCsr->aConstraint ){
         rc = SQLITE_NOMEM;
       }else{
         memset(pCsr->aConstraint, 0, sizeof(RtreeConstraint)*argc);
+        memset(pCsr->anQueue, 0, sizeof(u32)*(pRtree->iDepth + 1));
         assert( (idxStr==0 && argc==0)
                 || (idxStr && (int)strlen(idxStr)==argc*2) );
         for(ii=0; ii<argc; ii++){
           RtreeConstraint *p = &pCsr->aConstraint[ii];
           p->op = idxStr[ii*2];
-          p->iCoord = idxStr[ii*2+1]-'a';
-          if( p->op==RTREE_MATCH ){
+          p->iCoord = idxStr[ii*2+1]-'0';
+          if( p->op>=RTREE_MATCH ){
             /* A MATCH operator. The right-hand-side must be a blob that
             ** can be cast into an RtreeMatchArg object. One created using
             ** an sqlite3_rtree_geometry_callback() SQL user function.
@@ -143510,41 +146236,35 @@ static int rtreeFilter(
             if( rc!=SQLITE_OK ){
               break;
             }
+            p->pInfo->nCoord = pRtree->nDim*2;
+            p->pInfo->anQueue = pCsr->anQueue;
+            p->pInfo->mxLevel = pRtree->iDepth + 1;
           }else{
 #ifdef SQLITE_RTREE_INT_ONLY
-            p->rValue = sqlite3_value_int64(argv[ii]);
+            p->u.rValue = sqlite3_value_int64(argv[ii]);
 #else
-            p->rValue = sqlite3_value_double(argv[ii]);
+            p->u.rValue = sqlite3_value_double(argv[ii]);
 #endif
           }
         }
       }
     }
-  
     if( rc==SQLITE_OK ){
-      pCsr->pNode = 0;
-      rc = nodeAcquire(pRtree, 1, 0, &pRoot);
-    }
-    if( rc==SQLITE_OK ){
-      int isEof = 1;
-      int nCell = NCELL(pRoot);
-      pCsr->pNode = pRoot;
-      for(pCsr->iCell=0; rc==SQLITE_OK && pCsr->iCell<nCell; pCsr->iCell++){
-        assert( pCsr->pNode==pRoot );
-        rc = descendToCell(pRtree, pCsr, pRtree->iDepth, &isEof);
-        if( !isEof ){
-          break;
-        }
-      }
-      if( rc==SQLITE_OK && isEof ){
-        assert( pCsr->pNode==pRoot );
-        nodeRelease(pRtree, pRoot);
-        pCsr->pNode = 0;
-      }
-      assert( rc!=SQLITE_OK || !pCsr->pNode || pCsr->iCell<NCELL(pCsr->pNode) );
+      RtreeSearchPoint *pNew;
+      pNew = rtreeSearchPointNew(pCsr, RTREE_ZERO, pRtree->iDepth+1);
+      if( pNew==0 ) return SQLITE_NOMEM;
+      pNew->id = 1;
+      pNew->iCell = 0;
+      pNew->eWithin = PARTLY_WITHIN;
+      assert( pCsr->bPoint==1 );
+      pCsr->aNode[0] = pRoot;
+      pRoot = 0;
+      RTREE_QUEUE_TRACE(pCsr, "PUSH-Fm:");
+      rc = rtreeStepToLeaf(pCsr);
     }
   }
 
+  nodeRelease(pRtree, pRoot);
   rtreeRelease(pRtree);
   return rc;
 }
@@ -143646,7 +146366,7 @@ static int rtreeBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){
           break;
       }
       zIdxStr[iIdx++] = op;
-      zIdxStr[iIdx++] = p->iColumn - 1 + 'a';
+      zIdxStr[iIdx++] = p->iColumn - 1 + '0';
       pIdxInfo->aConstraintUsage[ii].argvIndex = (iIdx/2);
       pIdxInfo->aConstraintUsage[ii].omit = 1;
     }
@@ -143739,62 +146459,32 @@ static RtreeDValue cellGrowth(Rtree *pRtree, RtreeCell *p, RtreeCell *pCell){
   return (cellArea(pRtree, &cell)-area);
 }
 
-#if VARIANT_RSTARTREE_CHOOSESUBTREE || VARIANT_RSTARTREE_SPLIT
 static RtreeDValue cellOverlap(
   Rtree *pRtree, 
   RtreeCell *p, 
   RtreeCell *aCell, 
-  int nCell, 
-  int iExclude
+  int nCell
 ){
   int ii;
-  RtreeDValue overlap = 0.0;
+  RtreeDValue overlap = RTREE_ZERO;
   for(ii=0; ii<nCell; ii++){
-#if VARIANT_RSTARTREE_CHOOSESUBTREE
-    if( ii!=iExclude )
-#else
-    assert( iExclude==-1 );
-    UNUSED_PARAMETER(iExclude);
-#endif
-    {
-      int jj;
-      RtreeDValue o = (RtreeDValue)1;
-      for(jj=0; jj<(pRtree->nDim*2); jj+=2){
-        RtreeDValue x1, x2;
-
-        x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj]));
-        x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1]));
-
-        if( x2<x1 ){
-          o = 0.0;
-          break;
-        }else{
-          o = o * (x2-x1);
-        }
+    int jj;
+    RtreeDValue o = (RtreeDValue)1;
+    for(jj=0; jj<(pRtree->nDim*2); jj+=2){
+      RtreeDValue x1, x2;
+      x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj]));
+      x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1]));
+      if( x2<x1 ){
+        o = (RtreeDValue)0;
+        break;
+      }else{
+        o = o * (x2-x1);
       }
-      overlap += o;
     }
+    overlap += o;
   }
   return overlap;
 }
-#endif
-
-#if VARIANT_RSTARTREE_CHOOSESUBTREE
-static RtreeDValue cellOverlapEnlargement(
-  Rtree *pRtree, 
-  RtreeCell *p, 
-  RtreeCell *pInsert, 
-  RtreeCell *aCell, 
-  int nCell, 
-  int iExclude
-){
-  RtreeDValue before, after;
-  before = cellOverlap(pRtree, p, aCell, nCell, iExclude);
-  cellUnion(pRtree, p, pInsert);
-  after = cellOverlap(pRtree, p, aCell, nCell, iExclude);
-  return (after-before);
-}
-#endif
 
 
 /*
@@ -143816,12 +146506,8 @@ static int ChooseLeaf(
     int iCell;
     sqlite3_int64 iBest = 0;
 
-    RtreeDValue fMinGrowth = 0.0;
-    RtreeDValue fMinArea = 0.0;
-#if VARIANT_RSTARTREE_CHOOSESUBTREE
-    RtreeDValue fMinOverlap = 0.0;
-    RtreeDValue overlap;
-#endif
+    RtreeDValue fMinGrowth = RTREE_ZERO;
+    RtreeDValue fMinArea = RTREE_ZERO;
 
     int nCell = NCELL(pNode);
     RtreeCell cell;
@@ -143829,22 +146515,6 @@ static int ChooseLeaf(
 
     RtreeCell *aCell = 0;
 
-#if VARIANT_RSTARTREE_CHOOSESUBTREE
-    if( ii==(pRtree->iDepth-1) ){
-      int jj;
-      aCell = sqlite3_malloc(sizeof(RtreeCell)*nCell);
-      if( !aCell ){
-        rc = SQLITE_NOMEM;
-        nodeRelease(pRtree, pNode);
-        pNode = 0;
-        continue;
-      }
-      for(jj=0; jj<nCell; jj++){
-        nodeGetCell(pRtree, pNode, jj, &aCell[jj]);
-      }
-    }
-#endif
-
     /* Select the child node which will be enlarged the least if pCell
     ** is inserted into it. Resolve ties by choosing the entry with
     ** the smallest area.
@@ -143856,26 +146526,9 @@ static int ChooseLeaf(
       nodeGetCell(pRtree, pNode, iCell, &cell);
       growth = cellGrowth(pRtree, &cell, pCell);
       area = cellArea(pRtree, &cell);
-
-#if VARIANT_RSTARTREE_CHOOSESUBTREE
-      if( ii==(pRtree->iDepth-1) ){
-        overlap = cellOverlapEnlargement(pRtree,&cell,pCell,aCell,nCell,iCell);
-      }else{
-        overlap = 0.0;
-      }
-      if( (iCell==0) 
-       || (overlap<fMinOverlap) 
-       || (overlap==fMinOverlap && growth<fMinGrowth)
-       || (overlap==fMinOverlap && growth==fMinGrowth && area<fMinArea)
-      ){
-        bBest = 1;
-        fMinOverlap = overlap;
-      }
-#else
       if( iCell==0||growth<fMinGrowth||(growth==fMinGrowth && area<fMinArea) ){
         bBest = 1;
       }
-#endif
       if( bBest ){
         fMinGrowth = growth;
         fMinArea = area;
@@ -143946,155 +146599,6 @@ static int parentWrite(Rtree *pRtree, sqlite3_int64 iNode, sqlite3_int64 iPar){
 
 static int rtreeInsertCell(Rtree *, RtreeNode *, RtreeCell *, int);
 
-#if VARIANT_GUTTMAN_LINEAR_SPLIT
-/*
-** Implementation of the linear variant of the PickNext() function from
-** Guttman[84].
-*/
-static RtreeCell *LinearPickNext(
-  Rtree *pRtree,
-  RtreeCell *aCell, 
-  int nCell, 
-  RtreeCell *pLeftBox, 
-  RtreeCell *pRightBox,
-  int *aiUsed
-){
-  int ii;
-  for(ii=0; aiUsed[ii]; ii++);
-  aiUsed[ii] = 1;
-  return &aCell[ii];
-}
-
-/*
-** Implementation of the linear variant of the PickSeeds() function from
-** Guttman[84].
-*/
-static void LinearPickSeeds(
-  Rtree *pRtree,
-  RtreeCell *aCell, 
-  int nCell, 
-  int *piLeftSeed, 
-  int *piRightSeed
-){
-  int i;
-  int iLeftSeed = 0;
-  int iRightSeed = 1;
-  RtreeDValue maxNormalInnerWidth = (RtreeDValue)0;
-
-  /* Pick two "seed" cells from the array of cells. The algorithm used
-  ** here is the LinearPickSeeds algorithm from Gutman[1984]. The 
-  ** indices of the two seed cells in the array are stored in local
-  ** variables iLeftSeek and iRightSeed.
-  */
-  for(i=0; i<pRtree->nDim; i++){
-    RtreeDValue x1 = DCOORD(aCell[0].aCoord[i*2]);
-    RtreeDValue x2 = DCOORD(aCell[0].aCoord[i*2+1]);
-    RtreeDValue x3 = x1;
-    RtreeDValue x4 = x2;
-    int jj;
-
-    int iCellLeft = 0;
-    int iCellRight = 0;
-
-    for(jj=1; jj<nCell; jj++){
-      RtreeDValue left = DCOORD(aCell[jj].aCoord[i*2]);
-      RtreeDValue right = DCOORD(aCell[jj].aCoord[i*2+1]);
-
-      if( left<x1 ) x1 = left;
-      if( right>x4 ) x4 = right;
-      if( left>x3 ){
-        x3 = left;
-        iCellRight = jj;
-      }
-      if( right<x2 ){
-        x2 = right;
-        iCellLeft = jj;
-      }
-    }
-
-    if( x4!=x1 ){
-      RtreeDValue normalwidth = (x3 - x2) / (x4 - x1);
-      if( normalwidth>maxNormalInnerWidth ){
-        iLeftSeed = iCellLeft;
-        iRightSeed = iCellRight;
-      }
-    }
-  }
-
-  *piLeftSeed = iLeftSeed;
-  *piRightSeed = iRightSeed;
-}
-#endif /* VARIANT_GUTTMAN_LINEAR_SPLIT */
-
-#if VARIANT_GUTTMAN_QUADRATIC_SPLIT
-/*
-** Implementation of the quadratic variant of the PickNext() function from
-** Guttman[84].
-*/
-static RtreeCell *QuadraticPickNext(
-  Rtree *pRtree,
-  RtreeCell *aCell, 
-  int nCell, 
-  RtreeCell *pLeftBox, 
-  RtreeCell *pRightBox,
-  int *aiUsed
-){
-  #define FABS(a) ((a)<0.0?-1.0*(a):(a))
-
-  int iSelect = -1;
-  RtreeDValue fDiff;
-  int ii;
-  for(ii=0; ii<nCell; ii++){
-    if( aiUsed[ii]==0 ){
-      RtreeDValue left = cellGrowth(pRtree, pLeftBox, &aCell[ii]);
-      RtreeDValue right = cellGrowth(pRtree, pLeftBox, &aCell[ii]);
-      RtreeDValue diff = FABS(right-left);
-      if( iSelect<0 || diff>fDiff ){
-        fDiff = diff;
-        iSelect = ii;
-      }
-    }
-  }
-  aiUsed[iSelect] = 1;
-  return &aCell[iSelect];
-}
-
-/*
-** Implementation of the quadratic variant of the PickSeeds() function from
-** Guttman[84].
-*/
-static void QuadraticPickSeeds(
-  Rtree *pRtree,
-  RtreeCell *aCell, 
-  int nCell, 
-  int *piLeftSeed, 
-  int *piRightSeed
-){
-  int ii;
-  int jj;
-
-  int iLeftSeed = 0;
-  int iRightSeed = 1;
-  RtreeDValue fWaste = 0.0;
-
-  for(ii=0; ii<nCell; ii++){
-    for(jj=ii+1; jj<nCell; jj++){
-      RtreeDValue right = cellArea(pRtree, &aCell[jj]);
-      RtreeDValue growth = cellGrowth(pRtree, &aCell[ii], &aCell[jj]);
-      RtreeDValue waste = growth - right;
-
-      if( waste>fWaste ){
-        iLeftSeed = ii;
-        iRightSeed = jj;
-        fWaste = waste;
-      }
-    }
-  }
-
-  *piLeftSeed = iLeftSeed;
-  *piRightSeed = iRightSeed;
-}
-#endif /* VARIANT_GUTTMAN_QUADRATIC_SPLIT */
 
 /*
 ** Arguments aIdx, aDistance and aSpare all point to arrays of size
@@ -144235,7 +146739,6 @@ static void SortByDimension(
   }
 }
 
-#if VARIANT_RSTARTREE_SPLIT
 /*
 ** Implementation of the R*-tree variant of SplitNode from Beckman[1990].
 */
@@ -144254,7 +146757,7 @@ static int splitNodeStartree(
 
   int iBestDim = 0;
   int iBestSplit = 0;
-  RtreeDValue fBestMargin = 0.0;
+  RtreeDValue fBestMargin = RTREE_ZERO;
 
   int nByte = (pRtree->nDim+1)*(sizeof(int*)+nCell*sizeof(int));
 
@@ -144275,9 +146778,9 @@ static int splitNodeStartree(
   }
 
   for(ii=0; ii<pRtree->nDim; ii++){
-    RtreeDValue margin = 0.0;
-    RtreeDValue fBestOverlap = 0.0;
-    RtreeDValue fBestArea = 0.0;
+    RtreeDValue margin = RTREE_ZERO;
+    RtreeDValue fBestOverlap = RTREE_ZERO;
+    RtreeDValue fBestArea = RTREE_ZERO;
     int iBestLeft = 0;
     int nLeft;
 
@@ -144303,7 +146806,7 @@ static int splitNodeStartree(
       }
       margin += cellMargin(pRtree, &left);
       margin += cellMargin(pRtree, &right);
-      overlap = cellOverlap(pRtree, &left, &right, 1, -1);
+      overlap = cellOverlap(pRtree, &left, &right, 1);
       area = cellArea(pRtree, &left) + cellArea(pRtree, &right);
       if( (nLeft==RTREE_MINCELLS(pRtree))
        || (overlap<fBestOverlap)
@@ -144335,63 +146838,7 @@ static int splitNodeStartree(
   sqlite3_free(aaSorted);
   return SQLITE_OK;
 }
-#endif
-
-#if VARIANT_GUTTMAN_SPLIT
-/*
-** Implementation of the regular R-tree SplitNode from Guttman[1984].
-*/
-static int splitNodeGuttman(
-  Rtree *pRtree,
-  RtreeCell *aCell,
-  int nCell,
-  RtreeNode *pLeft,
-  RtreeNode *pRight,
-  RtreeCell *pBboxLeft,
-  RtreeCell *pBboxRight
-){
-  int iLeftSeed = 0;
-  int iRightSeed = 1;
-  int *aiUsed;
-  int i;
-
-  aiUsed = sqlite3_malloc(sizeof(int)*nCell);
-  if( !aiUsed ){
-    return SQLITE_NOMEM;
-  }
-  memset(aiUsed, 0, sizeof(int)*nCell);
-
-  PickSeeds(pRtree, aCell, nCell, &iLeftSeed, &iRightSeed);
-
-  memcpy(pBboxLeft, &aCell[iLeftSeed], sizeof(RtreeCell));
-  memcpy(pBboxRight, &aCell[iRightSeed], sizeof(RtreeCell));
-  nodeInsertCell(pRtree, pLeft, &aCell[iLeftSeed]);
-  nodeInsertCell(pRtree, pRight, &aCell[iRightSeed]);
-  aiUsed[iLeftSeed] = 1;
-  aiUsed[iRightSeed] = 1;
-
-  for(i=nCell-2; i>0; i--){
-    RtreeCell *pNext;
-    pNext = PickNext(pRtree, aCell, nCell, pBboxLeft, pBboxRight, aiUsed);
-    RtreeDValue diff =  
-      cellGrowth(pRtree, pBboxLeft, pNext) - 
-      cellGrowth(pRtree, pBboxRight, pNext)
-    ;
-    if( (RTREE_MINCELLS(pRtree)-NCELL(pRight)==i)
-     || (diff>0.0 && (RTREE_MINCELLS(pRtree)-NCELL(pLeft)!=i))
-    ){
-      nodeInsertCell(pRtree, pRight, pNext);
-      cellUnion(pRtree, pBboxRight, pNext);
-    }else{
-      nodeInsertCell(pRtree, pLeft, pNext);
-      cellUnion(pRtree, pBboxLeft, pNext);
-    }
-  }
 
-  sqlite3_free(aiUsed);
-  return SQLITE_OK;
-}
-#endif
 
 static int updateMapping(
   Rtree *pRtree, 
@@ -144469,7 +146916,8 @@ static int SplitNode(
   memset(pLeft->zData, 0, pRtree->iNodeSize);
   memset(pRight->zData, 0, pRtree->iNodeSize);
 
-  rc = AssignCells(pRtree, aCell, nCell, pLeft, pRight, &leftbbox, &rightbbox);
+  rc = splitNodeStartree(pRtree, aCell, nCell, pLeft, pRight,
+                         &leftbbox, &rightbbox);
   if( rc!=SQLITE_OK ){
     goto splitnode_out;
   }
@@ -144752,7 +147200,7 @@ static int Reinsert(
   }
 
   for(ii=0; ii<nCell; ii++){
-    aDistance[ii] = 0.0;
+    aDistance[ii] = RTREE_ZERO;
     for(iDim=0; iDim<pRtree->nDim; iDim++){
       RtreeDValue coord = (DCOORD(aCell[ii].aCoord[iDim*2+1]) - 
                                DCOORD(aCell[ii].aCoord[iDim*2]));
@@ -144818,16 +147266,12 @@ static int rtreeInsertCell(
     }
   }
   if( nodeInsertCell(pRtree, pNode, pCell) ){
-#if VARIANT_RSTARTREE_REINSERT
     if( iHeight<=pRtree->iReinsertHeight || pNode->iNode==1){
       rc = SplitNode(pRtree, pNode, pCell, iHeight);
     }else{
       pRtree->iReinsertHeight = iHeight;
       rc = Reinsert(pRtree, pNode, pCell, iHeight);
     }
-#else
-    rc = SplitNode(pRtree, pNode, pCell, iHeight);
-#endif
   }else{
     rc = AdjustTree(pRtree, pNode, pCell);
     if( rc==SQLITE_OK ){
@@ -144897,7 +147341,7 @@ static int rtreeDeleteRowid(Rtree *pRtree, sqlite3_int64 iDelete){
   ** about to be deleted. 
   */
   if( rc==SQLITE_OK ){
-    rc = findLeafNode(pRtree, iDelete, &pLeaf);
+    rc = findLeafNode(pRtree, iDelete, &pLeaf, 0);
   }
 
   /* Delete the cell in question from the leaf node. */
@@ -145142,26 +147586,32 @@ static int rtreeRename(sqlite3_vtab *pVtab, const char *zNewName){
 ** on sqlite_stat1 data. Otherwise, use RTREE_DEFAULT_ROWEST.
 */
 static int rtreeQueryStat1(sqlite3 *db, Rtree *pRtree){
-  const char *zSql = "SELECT stat FROM sqlite_stat1 WHERE tbl= ? || '_rowid'";
+  const char *zFmt = "SELECT stat FROM %Q.sqlite_stat1 WHERE tbl = '%q_rowid'";
+  char *zSql;
   sqlite3_stmt *p;
   int rc;
   i64 nRow = 0;
 
-  rc = sqlite3_prepare_v2(db, zSql, -1, &p, 0);
-  if( rc==SQLITE_OK ){
-    sqlite3_bind_text(p, 1, pRtree->zName, -1, SQLITE_STATIC);
-    if( sqlite3_step(p)==SQLITE_ROW ) nRow = sqlite3_column_int64(p, 0);
-    rc = sqlite3_finalize(p);
-  }else if( rc!=SQLITE_NOMEM ){
-    rc = SQLITE_OK;
-  }
+  zSql = sqlite3_mprintf(zFmt, pRtree->zDb, pRtree->zName);
+  if( zSql==0 ){
+    rc = SQLITE_NOMEM;
+  }else{
+    rc = sqlite3_prepare_v2(db, zSql, -1, &p, 0);
+    if( rc==SQLITE_OK ){
+      if( sqlite3_step(p)==SQLITE_ROW ) nRow = sqlite3_column_int64(p, 0);
+      rc = sqlite3_finalize(p);
+    }else if( rc!=SQLITE_NOMEM ){
+      rc = SQLITE_OK;
+    }
 
-  if( rc==SQLITE_OK ){
-    if( nRow==0 ){
-      pRtree->nRowEst = RTREE_DEFAULT_ROWEST;
-    }else{
-      pRtree->nRowEst = MAX(nRow, RTREE_MIN_ROWEST);
+    if( rc==SQLITE_OK ){
+      if( nRow==0 ){
+        pRtree->nRowEst = RTREE_DEFAULT_ROWEST;
+      }else{
+        pRtree->nRowEst = MAX(nRow, RTREE_MIN_ROWEST);
+      }
     }
+    sqlite3_free(zSql);
   }
 
   return rc;
@@ -145228,7 +147678,8 @@ static int rtreeSqlInit(
     char *zCreate = sqlite3_mprintf(
 "CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY, data BLOB);"
 "CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY, nodeno INTEGER);"
-"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY, parentnode INTEGER);"
+"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY,"
+                                  " parentnode INTEGER);"
 "INSERT INTO '%q'.'%q_node' VALUES(1, zeroblob(%d))",
       zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, pRtree->iNodeSize
     );
@@ -145430,6 +147881,8 @@ static int rtreeInit(
   if( rc==SQLITE_OK ){
     *ppVtab = (sqlite3_vtab *)pRtree;
   }else{
+    assert( *ppVtab==0 );
+    assert( pRtree->nBusy==1 );
     rtreeRelease(pRtree);
   }
   return rc;
@@ -145440,10 +147893,10 @@ static int rtreeInit(
 ** Implementation of a scalar function that decodes r-tree nodes to
 ** human readable strings. This can be used for debugging and analysis.
 **
-** The scalar function takes two arguments, a blob of data containing
-** an r-tree node, and the number of dimensions the r-tree indexes.
-** For a two-dimensional r-tree structure called "rt", to deserialize
-** all nodes, a statement like:
+** The scalar function takes two arguments: (1) the number of dimensions
+** to the rtree (between 1 and 5, inclusive) and (2) a blob of data containing
+** an r-tree node.  For a two-dimensional r-tree structure called "rt", to
+** deserialize all nodes, a statement like:
 **
 **   SELECT rtreenode(2, data) FROM rt_node;
 **
@@ -145476,7 +147929,7 @@ static void rtreenode(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){
     nCell = (int)strlen(zCell);
     for(jj=0; jj<tree.nDim*2; jj++){
 #ifndef SQLITE_RTREE_INT_ONLY
-      sqlite3_snprintf(512-nCell,&zCell[nCell], " %f",
+      sqlite3_snprintf(512-nCell,&zCell[nCell], " %g",
                        (double)cell.aCoord[jj].f);
 #else
       sqlite3_snprintf(512-nCell,&zCell[nCell], " %d",
@@ -145497,6 +147950,15 @@ static void rtreenode(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){
   sqlite3_result_text(ctx, zText, -1, sqlite3_free);
 }
 
+/* This routine implements an SQL function that returns the "depth" parameter
+** from the front of a blob that is an r-tree node.  For example:
+**
+**     SELECT rtreedepth(data) FROM rt_node WHERE nodeno=1;
+**
+** The depth value is 0 for all nodes other than the root node, and the root
+** node always has nodeno=1, so the example above is the primary use for this
+** routine.  This routine is intended for testing and analysis only.
+*/
 static void rtreedepth(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){
   UNUSED_PARAMETER(nArg);
   if( sqlite3_value_type(apArg[0])!=SQLITE_BLOB 
@@ -145539,22 +148001,31 @@ SQLITE_PRIVATE int sqlite3RtreeInit(sqlite3 *db){
 }
 
 /*
-** A version of sqlite3_free() that can be used as a callback. This is used
-** in two places - as the destructor for the blob value returned by the
-** invocation of a geometry function, and as the destructor for the geometry
-** functions themselves.
+** This routine deletes the RtreeGeomCallback object that was attached
+** one of the SQL functions create by sqlite3_rtree_geometry_callback()
+** or sqlite3_rtree_query_callback().  In other words, this routine is the
+** destructor for an RtreeGeomCallback objecct.  This routine is called when
+** the corresponding SQL function is deleted.
 */
-static void doSqlite3Free(void *p){
+static void rtreeFreeCallback(void *p){
+  RtreeGeomCallback *pInfo = (RtreeGeomCallback*)p;
+  if( pInfo->xDestructor ) pInfo->xDestructor(pInfo->pContext);
   sqlite3_free(p);
 }
 
 /*
-** Each call to sqlite3_rtree_geometry_callback() creates an ordinary SQLite
-** scalar user function. This C function is the callback used for all such
-** registered SQL functions.
+** Each call to sqlite3_rtree_geometry_callback() or
+** sqlite3_rtree_query_callback() creates an ordinary SQLite
+** scalar function that is implemented by this routine.
 **
-** The scalar user functions return a blob that is interpreted by r-tree
-** table MATCH operators.
+** All this function does is construct an RtreeMatchArg object that
+** contains the geometry-checking callback routines and a list of
+** parameters to this function, then return that RtreeMatchArg object
+** as a BLOB.
+**
+** The R-Tree MATCH operator will read the returned BLOB, deserialize
+** the RtreeMatchArg object, and use the RtreeMatchArg object to figure
+** out which elements of the R-Tree should be returned by the query.
 */
 static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){
   RtreeGeomCallback *pGeomCtx = (RtreeGeomCallback *)sqlite3_user_data(ctx);
@@ -145568,8 +148039,7 @@ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){
   }else{
     int i;
     pBlob->magic = RTREE_GEOMETRY_MAGIC;
-    pBlob->xGeom = pGeomCtx->xGeom;
-    pBlob->pContext = pGeomCtx->pContext;
+    pBlob->cb = pGeomCtx[0];
     pBlob->nParam = nArg;
     for(i=0; i<nArg; i++){
 #ifdef SQLITE_RTREE_INT_ONLY
@@ -145578,7 +148048,7 @@ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){
       pBlob->aParam[i] = sqlite3_value_double(aArg[i]);
 #endif
     }
-    sqlite3_result_blob(ctx, pBlob, nBlob, doSqlite3Free);
+    sqlite3_result_blob(ctx, pBlob, nBlob, sqlite3_free);
   }
 }
 
@@ -145586,10 +148056,10 @@ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){
 ** Register a new geometry function for use with the r-tree MATCH operator.
 */
 SQLITE_API int sqlite3_rtree_geometry_callback(
-  sqlite3 *db,
-  const char *zGeom,
-  int (*xGeom)(sqlite3_rtree_geometry *, int, RtreeDValue *, int *),
-  void *pContext
+  sqlite3 *db,                  /* Register SQL function on this connection */
+  const char *zGeom,            /* Name of the new SQL function */
+  int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*), /* Callback */
+  void *pContext                /* Extra data associated with the callback */
 ){
   RtreeGeomCallback *pGeomCtx;      /* Context object for new user-function */
 
@@ -145597,12 +148067,36 @@ SQLITE_API int sqlite3_rtree_geometry_callback(
   pGeomCtx = (RtreeGeomCallback *)sqlite3_malloc(sizeof(RtreeGeomCallback));
   if( !pGeomCtx ) return SQLITE_NOMEM;
   pGeomCtx->xGeom = xGeom;
+  pGeomCtx->xQueryFunc = 0;
+  pGeomCtx->xDestructor = 0;
   pGeomCtx->pContext = pContext;
-
-  /* Create the new user-function. Register a destructor function to delete
-  ** the context object when it is no longer required.  */
   return sqlite3_create_function_v2(db, zGeom, -1, SQLITE_ANY, 
-      (void *)pGeomCtx, geomCallback, 0, 0, doSqlite3Free
+      (void *)pGeomCtx, geomCallback, 0, 0, rtreeFreeCallback
+  );
+}
+
+/*
+** Register a new 2nd-generation geometry function for use with the
+** r-tree MATCH operator.
+*/
+SQLITE_API int sqlite3_rtree_query_callback(
+  sqlite3 *db,                 /* Register SQL function on this connection */
+  const char *zQueryFunc,      /* Name of new SQL function */
+  int (*xQueryFunc)(sqlite3_rtree_query_info*), /* Callback */
+  void *pContext,              /* Extra data passed into the callback */
+  void (*xDestructor)(void*)   /* Destructor for the extra data */
+){
+  RtreeGeomCallback *pGeomCtx;      /* Context object for new user-function */
+
+  /* Allocate and populate the context object. */
+  pGeomCtx = (RtreeGeomCallback *)sqlite3_malloc(sizeof(RtreeGeomCallback));
+  if( !pGeomCtx ) return SQLITE_NOMEM;
+  pGeomCtx->xGeom = 0;
+  pGeomCtx->xQueryFunc = xQueryFunc;
+  pGeomCtx->xDestructor = xDestructor;
+  pGeomCtx->pContext = pContext;
+  return sqlite3_create_function_v2(db, zQueryFunc, -1, SQLITE_ANY, 
+      (void *)pGeomCtx, geomCallback, 0, 0, rtreeFreeCallback
   );
 }
 
diff --git a/src/3rdparty/sqlite/sqlite3.h b/src/3rdparty/sqlite/sqlite3.h
index 0884ebad0e..9879f80d40 100644
--- a/src/3rdparty/sqlite/sqlite3.h
+++ b/src/3rdparty/sqlite/sqlite3.h
@@ -107,9 +107,9 @@ extern "C" {
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.8.4.3"
-#define SQLITE_VERSION_NUMBER 3008004
-#define SQLITE_SOURCE_ID      "2014-04-03 16:53:12 a611fa96c4a848614efe899130359c9f6fb889c3"
+#define SQLITE_VERSION        "3.8.6"
+#define SQLITE_VERSION_NUMBER 3008006
+#define SQLITE_SOURCE_ID      "2014-08-15 11:46:33 9491ba7d738528f168657adb43a198238abde19e"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -269,7 +269,7 @@ typedef sqlite_uint64 sqlite3_uint64;
 **
 ** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
 ** for the [sqlite3] object.
-** ^Calls to sqlite3_close() and sqlite3_close_v2() return SQLITE_OK if
+** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
 ** the [sqlite3] object is successfully destroyed and all associated
 ** resources are deallocated.
 **
@@ -277,7 +277,7 @@ typedef sqlite_uint64 sqlite3_uint64;
 ** statements or unfinished sqlite3_backup objects then sqlite3_close()
 ** will leave the database connection open and return [SQLITE_BUSY].
 ** ^If sqlite3_close_v2() is called with unfinalized prepared statements
-** and unfinished sqlite3_backups, then the database connection becomes
+** and/or unfinished sqlite3_backups, then the database connection becomes
 ** an unusable "zombie" which will automatically be deallocated when the
 ** last prepared statement is finalized or the last sqlite3_backup is
 ** finished.  The sqlite3_close_v2() interface is intended for use with
@@ -290,7 +290,7 @@ typedef sqlite_uint64 sqlite3_uint64;
 ** with the [sqlite3] object prior to attempting to close the object.  ^If
 ** sqlite3_close_v2() is called on a [database connection] that still has
 ** outstanding [prepared statements], [BLOB handles], and/or
-** [sqlite3_backup] objects then it returns SQLITE_OK but the deallocation
+** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
 ** of resources is deferred until all [prepared statements], [BLOB handles],
 ** and [sqlite3_backup] objects are also destroyed.
 **
@@ -386,16 +386,14 @@ SQLITE_API int sqlite3_exec(
 
 /*
 ** CAPI3REF: Result Codes
-** KEYWORDS: SQLITE_OK {error code} {error codes}
-** KEYWORDS: {result code} {result codes}
+** KEYWORDS: {result code definitions}
 **
 ** Many SQLite functions return an integer result code from the set shown
 ** here in order to indicate success or failure.
 **
 ** New error codes may be added in future versions of SQLite.
 **
-** See also: [SQLITE_IOERR_READ | extended result codes],
-** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK | result codes].
+** See also: [extended result code definitions]
 */
 #define SQLITE_OK           0   /* Successful result */
 /* beginning-of-error-codes */
@@ -433,26 +431,19 @@ SQLITE_API int sqlite3_exec(
 
 /*
 ** CAPI3REF: Extended Result Codes
-** KEYWORDS: {extended error code} {extended error codes}
-** KEYWORDS: {extended result code} {extended result codes}
+** KEYWORDS: {extended result code definitions}
 **
-** In its default configuration, SQLite API routines return one of 26 integer
-** [SQLITE_OK | result codes].  However, experience has shown that many of
+** In its default configuration, SQLite API routines return one of 30 integer
+** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
 ** address this, newer versions of SQLite (version 3.3.8 and later) include
 ** support for additional result codes that provide more detailed information
-** about errors. The extended result codes are enabled or disabled
+** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
-** [sqlite3_extended_result_codes()] API.
-**
-** Some of the available extended result codes are listed here.
-** One may expect the number of extended result codes will increase
-** over time.  Software that uses extended result codes should expect
-** to see new result codes in future releases of SQLite.
-**
-** The SQLITE_OK result code will never be extended.  It will always
-** be exactly zero.
+** [sqlite3_extended_result_codes()] API.  Or, the extended code for
+** the most recent error can be obtained using
+** [sqlite3_extended_errcode()].
 */
 #define SQLITE_IOERR_READ              (SQLITE_IOERR | (1<<8))
 #define SQLITE_IOERR_SHORT_READ        (SQLITE_IOERR | (2<<8))
@@ -560,7 +551,10 @@ SQLITE_API int sqlite3_exec(
 ** file that were written at the application level might have changed
 ** and that adjacent bytes, even bytes within the same sector are
 ** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
-** flag indicate that a file cannot be deleted when open.
+** flag indicate that a file cannot be deleted when open.  The
+** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
+** read-only media and cannot be changed even by processes with
+** elevated privileges.
 */
 #define SQLITE_IOCAP_ATOMIC                 0x00000001
 #define SQLITE_IOCAP_ATOMIC512              0x00000002
@@ -575,6 +569,7 @@ SQLITE_API int sqlite3_exec(
 #define SQLITE_IOCAP_SEQUENTIAL             0x00000400
 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
+#define SQLITE_IOCAP_IMMUTABLE              0x00002000
 
 /*
 ** CAPI3REF: File Locking Levels
@@ -681,7 +676,7 @@ struct sqlite3_file {
 ** locking strategy (for example to use dot-file locks), to inquire
 ** about the status of a lock, or to break stale locks.  The SQLite
 ** core reserves all opcodes less than 100 for its own use.
-** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
+** A [file control opcodes | list of opcodes] less than 100 is available.
 ** Applications that define a custom xFileControl method should use opcodes
 ** greater than 100 to avoid conflicts.  VFS implementations should
 ** return [SQLITE_NOTFOUND] for file control opcodes that they do not
@@ -754,6 +749,7 @@ struct sqlite3_io_methods {
 
 /*
 ** CAPI3REF: Standard File Control Opcodes
+** KEYWORDS: {file control opcodes} {file control opcode}
 **
 ** These integer constants are opcodes for the xFileControl method
 ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
@@ -943,6 +939,12 @@ struct sqlite3_io_methods {
 ** on whether or not the file has been renamed, moved, or deleted since it
 ** was first opened.
 **
+** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging.  This
+** opcode causes the xFileControl method to swap the file handle with the one
+** pointed to by the pArg argument.  This capability is used during testing
+** and only needs to be supported when SQLITE_TEST is defined.
+**
 ** </ul>
 */
 #define SQLITE_FCNTL_LOCKSTATE               1
@@ -966,6 +968,7 @@ struct sqlite3_io_methods {
 #define SQLITE_FCNTL_HAS_MOVED              20
 #define SQLITE_FCNTL_SYNC                   21
 #define SQLITE_FCNTL_COMMIT_PHASETWO        22
+#define SQLITE_FCNTL_WIN32_SET_HANDLE       23
 
 /*
 ** CAPI3REF: Mutex Handle
@@ -2026,27 +2029,33 @@ SQLITE_API int sqlite3_complete16(const void *sql);
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
 **
-** ^This routine sets a callback function that might be invoked whenever
-** an attempt is made to open a database table that another thread
-** or process has locked.
+** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
+** that might be invoked with argument P whenever
+** an attempt is made to access a database table associated with
+** [database connection] D when another thread
+** or process has the table locked.
+** The sqlite3_busy_handler() interface is used to implement
+** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
 **
-** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
+** ^If the busy callback is NULL, then [SQLITE_BUSY]
 ** is returned immediately upon encountering the lock.  ^If the busy callback
 ** is not NULL, then the callback might be invoked with two arguments.
 **
 ** ^The first argument to the busy handler is a copy of the void* pointer which
 ** is the third argument to sqlite3_busy_handler().  ^The second argument to
 ** the busy handler callback is the number of times that the busy handler has
-** been invoked for this locking event.  ^If the
+** been invoked for the same locking event.  ^If the
 ** busy callback returns 0, then no additional attempts are made to
-** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
+** access the database and [SQLITE_BUSY] is returned
+** to the application.
 ** ^If the callback returns non-zero, then another attempt
-** is made to open the database for reading and the cycle repeats.
+** is made to access the database and the cycle repeats.
 **
 ** The presence of a busy handler does not guarantee that it will be invoked
 ** when there is lock contention. ^If SQLite determines that invoking the busy
 ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
+** to the application instead of invoking the 
+** busy handler.
 ** Consider a scenario where one process is holding a read lock that
 ** it is trying to promote to a reserved lock and
 ** a second process is holding a reserved lock that it is trying
@@ -2060,28 +2069,15 @@ SQLITE_API int sqlite3_complete16(const void *sql);
 **
 ** ^The default busy callback is NULL.
 **
-** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
-** when SQLite is in the middle of a large transaction where all the
-** changes will not fit into the in-memory cache.  SQLite will
-** already hold a RESERVED lock on the database file, but it needs
-** to promote this lock to EXCLUSIVE so that it can spill cache
-** pages into the database file without harm to concurrent
-** readers.  ^If it is unable to promote the lock, then the in-memory
-** cache will be left in an inconsistent state and so the error
-** code is promoted from the relatively benign [SQLITE_BUSY] to
-** the more severe [SQLITE_IOERR_BLOCKED].  ^This error code promotion
-** forces an automatic rollback of the changes.  See the
-** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
-** CorruptionFollowingBusyError</a> wiki page for a discussion of why
-** this is important.
-**
 ** ^(There can only be a single busy handler defined for each
 ** [database connection].  Setting a new busy handler clears any
 ** previously set handler.)^  ^Note that calling [sqlite3_busy_timeout()]
-** will also set or clear the busy handler.
+** or evaluating [PRAGMA busy_timeout=N] will change the
+** busy handler and thus clear any previously set busy handler.
 **
 ** The busy callback should not take any actions which modify the
-** database connection that invoked the busy handler.  Any such actions
+** database connection that invoked the busy handler.  In other words,
+** the busy handler is not reentrant.  Any such actions
 ** result in undefined behavior.
 ** 
 ** A busy handler must not close the database connection
@@ -2097,7 +2093,7 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
 ** will sleep multiple times until at least "ms" milliseconds of sleeping
 ** have accumulated.  ^After at least "ms" milliseconds of sleeping,
 ** the handler returns 0 which causes [sqlite3_step()] to return
-** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
+** [SQLITE_BUSY].
 **
 ** ^Calling this routine with an argument less than or equal to zero
 ** turns off all busy handlers.
@@ -2106,6 +2102,8 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
 ** [database connection] any any given moment.  If another busy handler
 ** was defined  (using [sqlite3_busy_handler()]) prior to calling
 ** this routine, that other busy handler is cleared.)^
+**
+** See also:  [PRAGMA busy_timeout]
 */
 SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
@@ -2507,8 +2505,8 @@ SQLITE_API int sqlite3_set_authorizer(
 ** [sqlite3_set_authorizer | authorizer documentation] for additional
 ** information.
 **
-** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK | return code]
-** from the [sqlite3_vtab_on_conflict()] interface.
+** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
+** returned from the [sqlite3_vtab_on_conflict()] interface.
 */
 #define SQLITE_DENY   1   /* Abort the SQL statement with an error */
 #define SQLITE_IGNORE 2   /* Don't allow access, but don't generate an error */
@@ -2779,6 +2777,30 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 **     ^If sqlite3_open_v2() is used and the "cache" parameter is present in
 **     a URI filename, its value overrides any behavior requested by setting
 **     SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
+**
+**  <li> <b>psow</b>: ^The psow parameter may be "true" (or "on" or "yes" or
+**     "1") or "false" (or "off" or "no" or "0") to indicate that the
+**     [powersafe overwrite] property does or does not apply to the
+**     storage media on which the database file resides.  ^The psow query
+**     parameter only works for the built-in unix and Windows VFSes.
+**
+**  <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter
+**     which if set disables file locking in rollback journal modes.  This
+**     is useful for accessing a database on a filesystem that does not
+**     support locking.  Caution:  Database corruption might result if two
+**     or more processes write to the same database and any one of those
+**     processes uses nolock=1.
+**
+**  <li> <b>immutable</b>: ^The immutable parameter is a boolean query
+**     parameter that indicates that the database file is stored on
+**     read-only media.  ^When immutable is set, SQLite assumes that the
+**     database file cannot be changed, even by a process with higher
+**     privilege, and so the database is opened read-only and all locking
+**     and change detection is disabled.  Caution: Setting the immutable
+**     property on a database file that does in fact change can result
+**     in incorrect query results and/or [SQLITE_CORRUPT] errors.
+**     See also: [SQLITE_IOCAP_IMMUTABLE].
+**       
 ** </ul>
 **
 ** ^Specifying an unknown parameter in the query component of a URI is not an
@@ -2808,8 +2830,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 **          Open file "data.db" in the current directory for read-only access.
 **          Regardless of whether or not shared-cache mode is enabled by
 **          default, use a private cache.
-** <tr><td> file:/home/fred/data.db?vfs=unix-nolock <td>
-**          Open file "/home/fred/data.db". Use the special VFS "unix-nolock".
+** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
+**          Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
+**          that uses dot-files in place of posix advisory locking.
 ** <tr><td> file:data.db?mode=readonly <td> 
 **          An error. "readonly" is not a valid option for the "mode" parameter.
 ** </table>
@@ -4670,6 +4693,13 @@ SQLITE_API int sqlite3_sleep(int);
 ** is a NULL pointer, then SQLite performs a search for an appropriate
 ** temporary file directory.
 **
+** Applications are strongly discouraged from using this global variable.
+** It is required to set a temporary folder on Windows Runtime (WinRT).
+** But for all other platforms, it is highly recommended that applications
+** neither read nor write this variable.  This global variable is a relic
+** that exists for backwards compatibility of legacy applications and should
+** be avoided in new projects.
+**
 ** It is not safe to read or modify this variable in more than one
 ** thread at a time.  It is not safe to read or modify this variable
 ** if a [database connection] is being used at the same time in a separate
@@ -4688,6 +4718,11 @@ SQLITE_API int sqlite3_sleep(int);
 ** Hence, if this variable is modified directly, either it should be
 ** made NULL or made to point to memory obtained from [sqlite3_malloc]
 ** or else the use of the [temp_store_directory pragma] should be avoided.
+** Except when requested by the [temp_store_directory pragma], SQLite
+** does not free the memory that sqlite3_temp_directory points to.  If
+** the application wants that memory to be freed, it must do
+** so itself, taking care to only do so after all [database connection]
+** objects have been destroyed.
 **
 ** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
 ** prior to calling [sqlite3_open] or [sqlite3_open_v2].  Otherwise, various
@@ -5822,10 +5857,12 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
 ** <li>  SQLITE_MUTEX_RECURSIVE
 ** <li>  SQLITE_MUTEX_STATIC_MASTER
 ** <li>  SQLITE_MUTEX_STATIC_MEM
-** <li>  SQLITE_MUTEX_STATIC_MEM2
+** <li>  SQLITE_MUTEX_STATIC_OPEN
 ** <li>  SQLITE_MUTEX_STATIC_PRNG
 ** <li>  SQLITE_MUTEX_STATIC_LRU
-** <li>  SQLITE_MUTEX_STATIC_LRU2
+** <li>  SQLITE_MUTEX_STATIC_PMEM
+** <li>  SQLITE_MUTEX_STATIC_APP1
+** <li>  SQLITE_MUTEX_STATIC_APP2
 ** </ul>)^
 **
 ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
@@ -6029,6 +6066,9 @@ SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
+#define SQLITE_MUTEX_STATIC_APP1      8  /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP2      9  /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP3     10  /* For use by application */
 
 /*
 ** CAPI3REF: Retrieve the mutex for a database connection
@@ -6123,7 +6163,9 @@ SQLITE_API int sqlite3_test_control(int op, ...);
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19
 #define SQLITE_TESTCTRL_NEVER_CORRUPT           20
 #define SQLITE_TESTCTRL_VDBE_COVERAGE           21
-#define SQLITE_TESTCTRL_LAST                    21
+#define SQLITE_TESTCTRL_BYTEORDER               22
+#define SQLITE_TESTCTRL_ISINIT                  23
+#define SQLITE_TESTCTRL_LAST                    23
 
 /*
 ** CAPI3REF: SQLite Runtime Status
@@ -7107,6 +7149,9 @@ SQLITE_API void *sqlite3_wal_hook(
 ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
 ** from SQL.
 **
+** ^Checkpoints initiated by this mechanism are
+** [sqlite3_wal_checkpoint_v2|PASSIVE].
+**
 ** ^Every new [database connection] defaults to having the auto-checkpoint
 ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
 ** pages.  The use of this interface
@@ -7123,6 +7168,10 @@ SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 ** empty string, then a checkpoint is run on all databases of
 ** connection D.  ^If the database connection D is not in
 ** [WAL | write-ahead log mode] then this interface is a harmless no-op.
+** ^The [sqlite3_wal_checkpoint(D,X)] interface initiates a
+** [sqlite3_wal_checkpoint_v2|PASSIVE] checkpoint.
+** Use the [sqlite3_wal_checkpoint_v2()] interface to get a FULL
+** or RESET checkpoint.
 **
 ** ^The [wal_checkpoint pragma] can be used to invoke this interface
 ** from SQL.  ^The [sqlite3_wal_autocheckpoint()] interface and the
@@ -7145,10 +7194,12 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 **   Checkpoint as many frames as possible without waiting for any database 
 **   readers or writers to finish. Sync the db file if all frames in the log
 **   are checkpointed. This mode is the same as calling 
-**   sqlite3_wal_checkpoint(). The busy-handler callback is never invoked.
+**   sqlite3_wal_checkpoint(). The [sqlite3_busy_handler|busy-handler callback]
+**   is never invoked.
 **
 ** <dt>SQLITE_CHECKPOINT_FULL<dd>
-**   This mode blocks (calls the busy-handler callback) until there is no
+**   This mode blocks (it invokes the
+**   [sqlite3_busy_handler|busy-handler callback]) until there is no
 **   database writer and all readers are reading from the most recent database
 **   snapshot. It then checkpoints all frames in the log file and syncs the
 **   database file. This call blocks database writers while it is running,
@@ -7156,7 +7207,8 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 **
 ** <dt>SQLITE_CHECKPOINT_RESTART<dd>
 **   This mode works the same way as SQLITE_CHECKPOINT_FULL, except after 
-**   checkpointing the log file it blocks (calls the busy-handler callback)
+**   checkpointing the log file it blocks (calls the 
+**   [sqlite3_busy_handler|busy-handler callback])
 **   until all readers are reading from the database file only. This ensures 
 **   that the next client to write to the database file restarts the log file 
 **   from the beginning. This call blocks database writers while it is running,
@@ -7294,6 +7346,7 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
 /*
 ** CAPI3REF: Conflict resolution modes
+** KEYWORDS: {conflict resolution mode}
 **
 ** These constants are returned by [sqlite3_vtab_on_conflict()] to
 ** inform a [virtual table] implementation what the [ON CONFLICT] mode
@@ -7346,6 +7399,16 @@ extern "C" {
 #endif
 
 typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
+typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;
+
+/* The double-precision datatype used by RTree depends on the
+** SQLITE_RTREE_INT_ONLY compile-time option.
+*/
+#ifdef SQLITE_RTREE_INT_ONLY
+  typedef sqlite3_int64 sqlite3_rtree_dbl;
+#else
+  typedef double sqlite3_rtree_dbl;
+#endif
 
 /*
 ** Register a geometry callback named zGeom that can be used as part of an
@@ -7356,11 +7419,7 @@ typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
 SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
-#ifdef SQLITE_RTREE_INT_ONLY
-  int (*xGeom)(sqlite3_rtree_geometry*, int n, sqlite3_int64 *a, int *pRes),
-#else
-  int (*xGeom)(sqlite3_rtree_geometry*, int n, double *a, int *pRes),
-#endif
+  int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
   void *pContext
 );
 
@@ -7372,11 +7431,60 @@ SQLITE_API int sqlite3_rtree_geometry_callback(
 struct sqlite3_rtree_geometry {
   void *pContext;                 /* Copy of pContext passed to s_r_g_c() */
   int nParam;                     /* Size of array aParam[] */
-  double *aParam;                 /* Parameters passed to SQL geom function */
+  sqlite3_rtree_dbl *aParam;      /* Parameters passed to SQL geom function */
   void *pUser;                    /* Callback implementation user data */
   void (*xDelUser)(void *);       /* Called by SQLite to clean up pUser */
 };
 
+/*
+** Register a 2nd-generation geometry callback named zScore that can be 
+** used as part of an R-Tree geometry query as follows:
+**
+**   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
+*/
+SQLITE_API int sqlite3_rtree_query_callback(
+  sqlite3 *db,
+  const char *zQueryFunc,
+  int (*xQueryFunc)(sqlite3_rtree_query_info*),
+  void *pContext,
+  void (*xDestructor)(void*)
+);
+
+
+/*
+** A pointer to a structure of the following type is passed as the 
+** argument to scored geometry callback registered using
+** sqlite3_rtree_query_callback().
+**
+** Note that the first 5 fields of this structure are identical to
+** sqlite3_rtree_geometry.  This structure is a subclass of
+** sqlite3_rtree_geometry.
+*/
+struct sqlite3_rtree_query_info {
+  void *pContext;                   /* pContext from when function registered */
+  int nParam;                       /* Number of function parameters */
+  sqlite3_rtree_dbl *aParam;        /* value of function parameters */
+  void *pUser;                      /* callback can use this, if desired */
+  void (*xDelUser)(void*);          /* function to free pUser */
+  sqlite3_rtree_dbl *aCoord;        /* Coordinates of node or entry to check */
+  unsigned int *anQueue;            /* Number of pending entries in the queue */
+  int nCoord;                       /* Number of coordinates */
+  int iLevel;                       /* Level of current node or entry */
+  int mxLevel;                      /* The largest iLevel value in the tree */
+  sqlite3_int64 iRowid;             /* Rowid for current entry */
+  sqlite3_rtree_dbl rParentScore;   /* Score of parent node */
+  int eParentWithin;                /* Visibility of parent node */
+  int eWithin;                      /* OUT: Visiblity */
+  sqlite3_rtree_dbl rScore;         /* OUT: Write the score here */
+};
+
+/*
+** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
+*/
+#define NOT_WITHIN       0   /* Object completely outside of query region */
+#define PARTLY_WITHIN    1   /* Object partially overlaps query region */
+#define FULLY_WITHIN     2   /* Object fully contained within query region */
+
 
 #ifdef __cplusplus
 }  /* end of the 'extern "C"' block */
diff --git a/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtAccessibilityDelegate.java b/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtAccessibilityDelegate.java
index 3275b90e33..a4626b9bb1 100644
--- a/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtAccessibilityDelegate.java
+++ b/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtAccessibilityDelegate.java
@@ -346,13 +346,24 @@ public class QtAccessibilityDelegate extends View.AccessibilityDelegate
     {
 //        Log.i(TAG, "ACTION " + action + " on " + virtualViewId);
 //        dumpNodes(virtualViewId);
+        boolean success = false;
         switch (action) {
         case AccessibilityNodeInfo.ACTION_CLICK:
-            boolean success = QtNativeAccessibility.clickAction(virtualViewId);
+            success = QtNativeAccessibility.clickAction(virtualViewId);
             if (success)
                 sendEventForVirtualViewId(virtualViewId, AccessibilityEvent.TYPE_VIEW_CLICKED);
-            return success;
+            break;
+        case AccessibilityNodeInfo.ACTION_SCROLL_FORWARD:
+            success = QtNativeAccessibility.scrollForward(virtualViewId);
+            if (success)
+                sendEventForVirtualViewId(virtualViewId, AccessibilityEvent.TYPE_VIEW_SCROLLED);
+            break;
+        case AccessibilityNodeInfo.ACTION_SCROLL_BACKWARD:
+            success = QtNativeAccessibility.scrollBackward(virtualViewId);
+            if (success)
+                sendEventForVirtualViewId(virtualViewId, AccessibilityEvent.TYPE_VIEW_SCROLLED);
+            break;
         }
-        return false;
+        return success;
     }
 }
diff --git a/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtNativeAccessibility.java b/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtNativeAccessibility.java
index 8a53623957..f0bf4a0897 100644
--- a/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtNativeAccessibility.java
+++ b/src/android/accessibility/jar/src/org/qtproject/qt5/android/accessibility/QtNativeAccessibility.java
@@ -53,6 +53,8 @@ class QtNativeAccessibility
     static native Rect screenRect(int objectId);
     static native int hitTest(float x, float y);
     static native boolean clickAction(int objectId);
+    static native boolean scrollForward(int objectId);
+    static native boolean scrollBackward(int objectId);
 
     static native boolean populateNode(int objectId, AccessibilityNodeInfo node);
 }
diff --git a/src/android/android.pro b/src/android/android.pro
index 1850f012c0..55a94a2c06 100644
--- a/src/android/android.pro
+++ b/src/android/android.pro
@@ -1,2 +1,2 @@
 TEMPLATE      = subdirs
-SUBDIRS       = jar java accessibility
+SUBDIRS       = jar java templates accessibility
diff --git a/src/android/jar/jar.pri b/src/android/jar/jar.pri
index 5906231c73..a962af18ab 100644
--- a/src/android/jar/jar.pri
+++ b/src/android/jar/jar.pri
@@ -1,5 +1,6 @@
 CONFIG += java
 DESTDIR = $$[QT_INSTALL_PREFIX/get]/jar
+API_VERSION = android-16
 
 PATHPREFIX = $$PWD/src/org/qtproject/qt5/android/
 
@@ -12,7 +13,10 @@ JAVASOURCES += \
     $$PATHPREFIX/QtMessageDialogHelper.java \
     $$PATHPREFIX/QtNative.java \
     $$PATHPREFIX/QtNativeLibrariesDir.java \
-    $$PATHPREFIX/QtSurface.java
+    $$PATHPREFIX/QtSurface.java \
+    $$PATHPREFIX/ExtractStyle.java \
+    $$PATHPREFIX/QtPopupMenu.java \
+    $$PATHPREFIX/QtPopupMenu14.java
 
 # install
 target.path = $$[QT_INSTALL_PREFIX]/jar
diff --git a/src/android/jar/src/org/qtproject/qt5/android/ExtractStyle.java b/src/android/jar/src/org/qtproject/qt5/android/ExtractStyle.java
new file mode 100644
index 0000000000..0eda08c9d9
--- /dev/null
+++ b/src/android/jar/src/org/qtproject/qt5/android/ExtractStyle.java
@@ -0,0 +1,1793 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the Android port of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+package org.qtproject.qt5.android;
+
+import java.io.File;
+import java.io.FileNotFoundException;
+import java.io.FileOutputStream;
+import java.io.IOException;
+import java.io.OutputStreamWriter;
+import java.lang.reflect.Field;
+import java.util.ArrayList;
+import java.util.HashMap;
+
+import org.json.JSONArray;
+import org.json.JSONException;
+import org.json.JSONObject;
+import org.xmlpull.v1.XmlPullParser;
+
+import android.content.Context;
+import android.content.res.ColorStateList;
+import android.content.res.Resources;
+import android.content.res.TypedArray;
+import android.content.res.XmlResourceParser;
+import android.graphics.Bitmap;
+import android.graphics.Bitmap.Config;
+import android.graphics.Canvas;
+import android.graphics.NinePatch;
+import android.graphics.Paint;
+import android.graphics.Rect;
+import android.graphics.RectF;
+import android.graphics.drawable.AnimationDrawable;
+import android.graphics.drawable.BitmapDrawable;
+import android.graphics.drawable.ClipDrawable;
+import android.graphics.drawable.ColorDrawable;
+import android.graphics.drawable.Drawable;
+import android.graphics.drawable.GradientDrawable;
+import android.graphics.drawable.GradientDrawable.Orientation;
+import android.graphics.drawable.InsetDrawable;
+import android.graphics.drawable.LayerDrawable;
+import android.graphics.drawable.NinePatchDrawable;
+import android.graphics.drawable.RotateDrawable;
+import android.graphics.drawable.ScaleDrawable;
+import android.graphics.drawable.StateListDrawable;
+import android.os.Build;
+import android.util.AttributeSet;
+import android.util.Log;
+import android.util.Xml;
+import android.view.inputmethod.EditorInfo;
+
+
+public class ExtractStyle {
+
+    native static int[] extractChunkInfo(byte[] chunkData);
+    native static int[] extractNativeChunkInfo(int nativeChunk);
+    native static int[] extractChunkInfo20(byte[] chunkData);
+    native static int[] extractNativeChunkInfo20(long nativeChunk);
+
+
+    Class<?> styleableClass = getStylableClass();
+    final int[] EMPTY_STATE_SET = {};
+    final int[] ENABLED_STATE_SET = {android.R.attr.state_enabled};
+    final int[] FOCUSED_STATE_SET = {android.R.attr.state_focused};
+    final int[] SELECTED_STATE_SET = {android.R.attr.state_selected};
+    final int[] PRESSED_STATE_SET = {android.R.attr.state_pressed};
+    final int[] WINDOW_FOCUSED_STATE_SET = {android.R.attr.state_window_focused};
+    final int[] ENABLED_FOCUSED_STATE_SET = stateSetUnion(ENABLED_STATE_SET, FOCUSED_STATE_SET);
+    final int[] ENABLED_SELECTED_STATE_SET = stateSetUnion(ENABLED_STATE_SET, SELECTED_STATE_SET);
+    final int[] ENABLED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(ENABLED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] FOCUSED_SELECTED_STATE_SET = stateSetUnion(FOCUSED_STATE_SET, SELECTED_STATE_SET);
+    final int[] FOCUSED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(FOCUSED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] ENABLED_FOCUSED_SELECTED_STATE_SET =  stateSetUnion(ENABLED_FOCUSED_STATE_SET, SELECTED_STATE_SET);
+    final int[] ENABLED_FOCUSED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(ENABLED_FOCUSED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] ENABLED_SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(ENABLED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET =  stateSetUnion(FOCUSED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] ENABLED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(ENABLED_FOCUSED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_SELECTED_STATE_SET = stateSetUnion(PRESSED_STATE_SET, SELECTED_STATE_SET);
+    final int[] PRESSED_SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_FOCUSED_STATE_SET = stateSetUnion(PRESSED_STATE_SET, FOCUSED_STATE_SET);
+    final int[] PRESSED_FOCUSED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_FOCUSED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_FOCUSED_SELECTED_STATE_SET = stateSetUnion(PRESSED_FOCUSED_STATE_SET, SELECTED_STATE_SET);
+    final int[] PRESSED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_FOCUSED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_ENABLED_STATE_SET = stateSetUnion(PRESSED_STATE_SET, ENABLED_STATE_SET);
+    final int[] PRESSED_ENABLED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_ENABLED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_ENABLED_SELECTED_STATE_SET = stateSetUnion(PRESSED_ENABLED_STATE_SET, SELECTED_STATE_SET);
+    final int[] PRESSED_ENABLED_SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_ENABLED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_ENABLED_FOCUSED_STATE_SET = stateSetUnion(PRESSED_ENABLED_STATE_SET, FOCUSED_STATE_SET);
+    final int[] PRESSED_ENABLED_FOCUSED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_ENABLED_FOCUSED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+    final int[] PRESSED_ENABLED_FOCUSED_SELECTED_STATE_SET = stateSetUnion(PRESSED_ENABLED_FOCUSED_STATE_SET, SELECTED_STATE_SET);
+    final int[] PRESSED_ENABLED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET = stateSetUnion(PRESSED_ENABLED_FOCUSED_SELECTED_STATE_SET, WINDOW_FOCUSED_STATE_SET);
+
+
+    final int View_background = getField(styleableClass,"View_background");
+    final int View_padding = getField(styleableClass,"View_padding");
+    final int View_paddingLeft = getField(styleableClass,"View_paddingLeft");
+    final int View_paddingTop = getField(styleableClass,"View_paddingTop");
+    final int View_paddingRight = getField(styleableClass,"View_paddingRight");
+    final int View_paddingBottom = getField(styleableClass,"View_paddingBottom");
+    final int View_scrollX = getField(styleableClass,"View_scrollX");
+    final int View_scrollY = getField(styleableClass,"View_scrollY");
+    final int View_id = getField(styleableClass,"View_id");
+    final int View_tag = getField(styleableClass,"View_tag");
+    final int View_fitsSystemWindows = getField(styleableClass,"View_fitsSystemWindows");
+    final int View_focusable = getField(styleableClass,"View_focusable");
+    final int View_focusableInTouchMode = getField(styleableClass,"View_focusableInTouchMode");
+    final int View_clickable = getField(styleableClass,"View_clickable");
+    final int View_longClickable = getField(styleableClass,"View_longClickable");
+    final int View_saveEnabled = getField(styleableClass,"View_saveEnabled");
+    final int View_duplicateParentState = getField(styleableClass,"View_duplicateParentState");
+    final int View_visibility = getField(styleableClass,"View_visibility");
+    final int View_drawingCacheQuality = getField(styleableClass,"View_drawingCacheQuality");
+    final int View_contentDescription = getField(styleableClass,"View_contentDescription");
+    final int View_soundEffectsEnabled = getField(styleableClass,"View_soundEffectsEnabled");
+    final int View_hapticFeedbackEnabled = getField(styleableClass,"View_hapticFeedbackEnabled");
+    final int View_scrollbars = getField(styleableClass,"View_scrollbars");
+    final int View_fadingEdge = getField(styleableClass,"View_fadingEdge");
+    final int View_scrollbarStyle = getField(styleableClass,"View_scrollbarStyle");
+    final int View_scrollbarFadeDuration = getField(styleableClass,"View_scrollbarFadeDuration");
+    final int View_scrollbarDefaultDelayBeforeFade = getField(styleableClass,"View_scrollbarDefaultDelayBeforeFade");
+    final int View_scrollbarSize = getField(styleableClass,"View_scrollbarSize");
+    final int View_scrollbarThumbHorizontal = getField(styleableClass,"View_scrollbarThumbHorizontal");
+    final int View_scrollbarThumbVertical = getField(styleableClass,"View_scrollbarThumbVertical");
+    final int View_scrollbarTrackHorizontal = getField(styleableClass,"View_scrollbarTrackHorizontal");
+    final int View_scrollbarTrackVertical = getField(styleableClass,"View_scrollbarTrackVertical");
+    final int View_isScrollContainer = getField(styleableClass,"View_isScrollContainer");
+    final int View_keepScreenOn = getField(styleableClass,"View_keepScreenOn");
+    final int View_filterTouchesWhenObscured = getField(styleableClass,"View_filterTouchesWhenObscured");
+    final int View_nextFocusLeft = getField(styleableClass,"View_nextFocusLeft");
+    final int View_nextFocusRight = getField(styleableClass,"View_nextFocusRight");
+    final int View_nextFocusUp = getField(styleableClass,"View_nextFocusUp");
+    final int View_nextFocusDown = getField(styleableClass,"View_nextFocusDown");
+    final int View_minWidth = getField(styleableClass,"View_minWidth");
+    final int View_minHeight = getField(styleableClass,"View_minHeight");
+    final int View_onClick = getField(styleableClass,"View_onClick");
+    final int View_overScrollMode = getField(styleableClass,"View_overScrollMode");
+    final int View_paddingStart = getField(styleableClass,"View_paddingStart");
+    final int View_paddingEnd = getField(styleableClass,"View_paddingEnd");
+
+    final int TextAppearance_textColorHighlight = getField(styleableClass,"TextAppearance_textColorHighlight");
+    final int TextAppearance_textColor = getField(styleableClass,"TextAppearance_textColor");
+    final int TextAppearance_textColorHint = getField(styleableClass,"TextAppearance_textColorHint");
+    final int TextAppearance_textColorLink = getField(styleableClass,"TextAppearance_textColorLink");
+    final int TextAppearance_textSize = getField(styleableClass,"TextAppearance_textSize");
+    final int TextAppearance_typeface = getField(styleableClass,"TextAppearance_typeface");
+    final int TextAppearance_textStyle = getField(styleableClass,"TextAppearance_textStyle");
+    final int TextAppearance_textAllCaps = getField(styleableClass,"TextAppearance_textAllCaps");
+    final int TextView_editable = getField(styleableClass,"TextView_editable");
+    final int TextView_inputMethod = getField(styleableClass,"TextView_inputMethod");
+    final int TextView_numeric = getField(styleableClass,"TextView_numeric");
+    final int TextView_digits = getField(styleableClass,"TextView_digits");
+    final int TextView_phoneNumber = getField(styleableClass,"TextView_phoneNumber");
+    final int TextView_autoText = getField(styleableClass,"TextView_autoText");
+    final int TextView_capitalize = getField(styleableClass,"TextView_capitalize");
+    final int TextView_bufferType = getField(styleableClass,"TextView_bufferType");
+    final int TextView_selectAllOnFocus = getField(styleableClass,"TextView_selectAllOnFocus");
+    final int TextView_autoLink = getField(styleableClass,"TextView_autoLink");
+    final int TextView_linksClickable = getField(styleableClass,"TextView_linksClickable");
+    final int TextView_drawableLeft = getField(styleableClass,"TextView_drawableLeft");
+    final int TextView_drawableTop = getField(styleableClass,"TextView_drawableTop");
+    final int TextView_drawableRight = getField(styleableClass,"TextView_drawableRight");
+    final int TextView_drawableBottom = getField(styleableClass,"TextView_drawableBottom");
+    final int TextView_drawableStart = getField(styleableClass,"TextView_drawableStart");
+    final int TextView_drawableEnd = getField(styleableClass,"TextView_drawableEnd");
+    final int TextView_drawablePadding = getField(styleableClass,"TextView_drawablePadding");
+    final int TextView_textCursorDrawable = getField(styleableClass,"TextView_textCursorDrawable");
+    final int TextView_maxLines = getField(styleableClass,"TextView_maxLines");
+    final int TextView_maxHeight = getField(styleableClass,"TextView_maxHeight");
+    final int TextView_lines = getField(styleableClass,"TextView_lines");
+    final int TextView_height = getField(styleableClass,"TextView_height");
+    final int TextView_minLines = getField(styleableClass,"TextView_minLines");
+    final int TextView_minHeight = getField(styleableClass,"TextView_minHeight");
+    final int TextView_maxEms = getField(styleableClass,"TextView_maxEms");
+    final int TextView_maxWidth = getField(styleableClass,"TextView_maxWidth");
+    final int TextView_ems = getField(styleableClass,"TextView_ems");
+    final int TextView_width = getField(styleableClass,"TextView_width");
+    final int TextView_minEms = getField(styleableClass,"TextView_minEms");
+    final int TextView_minWidth = getField(styleableClass,"TextView_minWidth");
+    final int TextView_gravity = getField(styleableClass,"TextView_gravity");
+    final int TextView_hint = getField(styleableClass,"TextView_hint");
+    final int TextView_text = getField(styleableClass,"TextView_text");
+    final int TextView_scrollHorizontally = getField(styleableClass,"TextView_scrollHorizontally");
+    final int TextView_singleLine = getField(styleableClass,"TextView_singleLine");
+    final int TextView_ellipsize = getField(styleableClass,"TextView_ellipsize");
+    final int TextView_marqueeRepeatLimit = getField(styleableClass,"TextView_marqueeRepeatLimit");
+    final int TextView_includeFontPadding = getField(styleableClass,"TextView_includeFontPadding");
+    final int TextView_cursorVisible = getField(styleableClass,"TextView_cursorVisible");
+    final int TextView_maxLength = getField(styleableClass,"TextView_maxLength");
+    final int TextView_textScaleX = getField(styleableClass,"TextView_textScaleX");
+    final int TextView_freezesText = getField(styleableClass,"TextView_freezesText");
+    final int TextView_shadowColor = getField(styleableClass,"TextView_shadowColor");
+    final int TextView_shadowDx = getField(styleableClass,"TextView_shadowDx");
+    final int TextView_shadowDy = getField(styleableClass,"TextView_shadowDy");
+    final int TextView_shadowRadius = getField(styleableClass,"TextView_shadowRadius");
+    final int TextView_enabled = getField(styleableClass,"TextView_enabled");
+    final int TextView_textColorHighlight = getField(styleableClass,"TextView_textColorHighlight");
+    final int TextView_textColor = getField(styleableClass,"TextView_textColor");
+    final int TextView_textColorHint = getField(styleableClass,"TextView_textColorHint");
+    final int TextView_textColorLink = getField(styleableClass,"TextView_textColorLink");
+    final int TextView_textSize = getField(styleableClass,"TextView_textSize");
+    final int TextView_typeface = getField(styleableClass,"TextView_typeface");
+    final int TextView_textStyle = getField(styleableClass,"TextView_textStyle");
+    final int TextView_password = getField(styleableClass,"TextView_password");
+    final int TextView_lineSpacingExtra = getField(styleableClass,"TextView_lineSpacingExtra");
+    final int TextView_lineSpacingMultiplier = getField(styleableClass,"TextView_lineSpacingMultiplier");
+    final int TextView_inputType = getField(styleableClass,"TextView_inputType");
+    final int TextView_imeOptions = getField(styleableClass,"TextView_imeOptions");
+    final int TextView_imeActionLabel = getField(styleableClass,"TextView_imeActionLabel");
+    final int TextView_imeActionId = getField(styleableClass,"TextView_imeActionId");
+    final int TextView_privateImeOptions = getField(styleableClass,"TextView_privateImeOptions");
+    final int TextView_textSelectHandleLeft = getField(styleableClass,"TextView_textSelectHandleLeft");
+    final int TextView_textSelectHandleRight = getField(styleableClass,"TextView_textSelectHandleRight");
+    final int TextView_textSelectHandle = getField(styleableClass,"TextView_textSelectHandle");
+    final int TextView_textIsSelectable = getField(styleableClass,"TextView_textIsSelectable");
+    final int TextView_textAllCaps = getField(styleableClass,"TextView_textAllCaps");
+
+    final int ImageView_src = getField(styleableClass,"ImageView_src");
+    final int ImageView_baselineAlignBottom = getField(styleableClass,"ImageView_baselineAlignBottom");
+    final int ImageView_adjustViewBounds = getField(styleableClass,"ImageView_adjustViewBounds");
+    final int ImageView_maxWidth = getField(styleableClass,"ImageView_maxWidth");
+    final int ImageView_maxHeight = getField(styleableClass,"ImageView_maxHeight");
+    final int ImageView_scaleType = getField(styleableClass,"ImageView_scaleType");
+    final int ImageView_tint = getField(styleableClass,"ImageView_tint");
+    final int ImageView_cropToPadding = getField(styleableClass,"ImageView_cropToPadding");
+
+    final Resources.Theme m_theme;
+    final String m_extractPath;
+    Context m_context;
+    final int defaultBackgroundColor;
+    final int defaultTextColor;
+
+    class SimpleJsonWriter
+    {
+        private OutputStreamWriter m_writer;
+        private boolean m_addComma = false;
+        private int m_indentLevel = 0;
+        public SimpleJsonWriter(String filePath) throws FileNotFoundException
+        {
+            m_writer = new OutputStreamWriter(new FileOutputStream(filePath));
+        }
+
+        public void close() throws IOException
+        {
+            m_writer.close();
+        }
+
+        private void writeIndent() throws IOException
+        {
+           m_writer.write(" ", 0, m_indentLevel);
+        }
+
+        SimpleJsonWriter beginObject() throws IOException
+        {
+            writeIndent();
+            m_writer.write("{\n");
+            ++m_indentLevel;
+            m_addComma = false;
+            return this;
+        }
+
+        SimpleJsonWriter endObject() throws IOException
+        {
+            m_writer.write("\n");
+            writeIndent();
+            m_writer.write("}\n");
+            --m_indentLevel;
+            m_addComma = false;
+            return this;
+        }
+
+        SimpleJsonWriter name(String name) throws IOException
+        {
+            if (m_addComma) {
+                m_writer.write(",\n");
+            }
+            writeIndent();
+            m_writer.write(JSONObject.quote(name) + ": ");
+            m_addComma = true;
+            return this;
+        }
+
+        SimpleJsonWriter value(JSONObject value) throws IOException
+        {
+            m_writer.write(value.toString());
+            return this;
+        }
+    }
+
+    class FakeCanvas extends Canvas {
+        int[] chunkData = null;
+        class Size {
+            public int s,e;
+            Size(int start, int end)
+            {
+                s=start;
+                e=end;
+            }
+        }
+
+        public boolean isHardwareAccelerated() {
+            return true;
+        }
+
+        public void drawPatch(Bitmap bmp, byte[] chunks, RectF dst, Paint paint) {
+            if (Build.VERSION.SDK_INT > 19)
+                chunkData = extractChunkInfo20(chunks);
+            else
+                chunkData = extractChunkInfo(chunks);
+        }
+    }
+
+
+
+    private int[] stateSetUnion(final int[] stateSet1, final int[] stateSet2)
+    {
+        try
+        {
+            final int stateSet1Length = stateSet1.length;
+            final int stateSet2Length = stateSet2.length;
+            final int[] newSet = new int[stateSet1Length + stateSet2Length];
+            int k = 0;
+            int i = 0;
+            int j = 0;
+            // This is a merge of the two input state sets and assumes that the
+            // input sets are sorted by the order imposed by ViewDrawableStates.
+            int[] viewDrawableStatesState=(int[]) styleableClass.getDeclaredField("ViewDrawableStates").get(null);
+            for (int viewState : viewDrawableStatesState)
+            {
+                if (i < stateSet1Length && stateSet1[i] == viewState)
+                {
+                    newSet[k++] = viewState;
+                    i++;
+                } else if (j < stateSet2Length && stateSet2[j] == viewState) {
+                    newSet[k++] = viewState;
+                    j++;
+                }
+                if (k > 1) {
+                    assert(newSet[k - 1] > newSet[k - 2]);
+                }
+            }
+            return newSet;
+        }
+        catch(Exception e)
+        {
+            e.printStackTrace();
+        }
+        return null;
+    }
+
+    private Class<?> getStylableClass() {
+        try {
+            return Class.forName("android.R$styleable");
+        } catch (ClassNotFoundException e) {
+            e.printStackTrace();
+        }
+        return null;
+    }
+
+    int getField(Class<?> clazz, String fieldName)
+    {
+        try {
+            return clazz.getDeclaredField(fieldName).getInt(null);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return -1;
+    }
+
+    JSONObject getColorStateList(ColorStateList colorList)
+    {
+        JSONObject json = new JSONObject();
+        try
+        {
+            json.put("EMPTY_STATE_SET", colorList.getColorForState(EMPTY_STATE_SET, 0));
+            json.put("WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("SELECTED_STATE_SET", colorList.getColorForState(SELECTED_STATE_SET, 0));
+            json.put("SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("FOCUSED_STATE_SET", colorList.getColorForState(FOCUSED_STATE_SET, 0));
+            json.put("FOCUSED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(FOCUSED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("FOCUSED_SELECTED_STATE_SET", colorList.getColorForState(FOCUSED_SELECTED_STATE_SET, 0));
+            json.put("FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("ENABLED_STATE_SET", colorList.getColorForState(ENABLED_STATE_SET, 0));
+            json.put("ENABLED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(ENABLED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("ENABLED_SELECTED_STATE_SET", colorList.getColorForState(ENABLED_SELECTED_STATE_SET, 0));
+            json.put("ENABLED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(ENABLED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("ENABLED_FOCUSED_STATE_SET", colorList.getColorForState(ENABLED_FOCUSED_STATE_SET, 0));
+            json.put("ENABLED_FOCUSED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(ENABLED_FOCUSED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("ENABLED_FOCUSED_SELECTED_STATE_SET", colorList.getColorForState(ENABLED_FOCUSED_SELECTED_STATE_SET, 0));
+            json.put("ENABLED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(ENABLED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_STATE_SET", colorList.getColorForState(PRESSED_STATE_SET, 0));
+            json.put("PRESSED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_SELECTED_STATE_SET", colorList.getColorForState(PRESSED_SELECTED_STATE_SET, 0));
+            json.put("PRESSED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_FOCUSED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_FOCUSED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_FOCUSED_SELECTED_STATE_SET", colorList.getColorForState(PRESSED_FOCUSED_SELECTED_STATE_SET, 0));
+            json.put("PRESSED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_SELECTED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_SELECTED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_FOCUSED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_FOCUSED_WINDOW_FOCUSED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_FOCUSED_SELECTED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_FOCUSED_SELECTED_STATE_SET, 0));
+            json.put("PRESSED_ENABLED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET", colorList.getColorForState(PRESSED_ENABLED_FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET, 0));
+        } catch (JSONException e) {
+            e.printStackTrace();
+        }
+
+        return json;
+    }
+
+    final int [] DrawableStates ={android.R.attr.state_active, android.R.attr.state_checked
+                                , android.R.attr.state_enabled, android.R.attr.state_focused
+                                , android.R.attr.state_pressed, android.R.attr.state_selected
+                                , android.R.attr.state_window_focused, 16908288, 16843597, 16843518, 16843547};
+    final String[] DrawableStatesLabels = {"active", "checked", "enabled", "focused", "pressed", "selected", "window_focused", "background", "multiline", "activated", "accelerated"};
+    final String[] DisableDrawableStatesLabels = {"inactive", "unchecked", "disabled", "not_focused", "no_pressed", "unselected", "window_not_focused", "background", "multiline", "activated", "accelerated"};
+
+    String getFileName(String file, String[] states)
+    {
+        for (String state: states)
+            file+="__"+state;
+        return file;
+    }
+
+    String getStatesName(String[] states)
+    {
+        String statesName="";
+        for (String state: states)
+        {
+            if (statesName.length()>0)
+                statesName+="__";
+            statesName += state;
+        }
+        return statesName;
+    }
+
+    void addDrawableItemIfNotExists(JSONObject json, ArrayList<Integer> list, Drawable item, String[] states, String filename)
+    {
+        for (Integer it : list)
+        {
+            if (it.equals(item.hashCode()))
+                return;
+        }
+        list.add(item.hashCode());
+        try {
+            json.put(getStatesName(states), getDrawable(item, getFileName(filename, states), null));
+        } catch (JSONException e) {
+            e.printStackTrace();
+        }
+    }
+
+    void addSolution(String filename, JSONObject json, int c, Drawable drawable, ArrayList<Integer> drawableList, int u)
+    {
+        int pos=0;
+        int states[] = new int[c];
+        String [] statesText = new String[c];
+
+        for (int n= 0;u > 0;++n, u>>= 1)
+                if ((u & 1) > 0)
+                {
+                    statesText[pos]=DrawableStatesLabels[n];
+                    states[pos++]=DrawableStates[n];
+                }
+        drawable.setState(states);
+        addDrawableItemIfNotExists(json, drawableList, drawable.getCurrent(), statesText, filename);
+    }
+
+    int bitCount(int u)
+    {
+        int n;
+        for (n= 0;u > 0;++n, u&= (u - 1));
+            return n;
+    }
+
+    JSONObject getStatesList(int [] states) throws JSONException
+    {
+        JSONObject json = new JSONObject();
+        for (int s : states)
+        {
+            boolean found=false;
+            for (int d = 0;d<DrawableStates.length;d++)
+            {
+                if (s==DrawableStates[d])
+                {
+                    json.put(DrawableStatesLabels[d], true);
+                    found=true;
+                    break;
+                }
+                else if (s==-DrawableStates[d])
+                {
+                    json.put(DrawableStatesLabels[d], false);
+
+                    found=true;
+                    break;
+                }
+            }
+            if (!found)
+            {
+                json.put("unhandled_state_"+s,s>0);
+            }
+        }
+        return json;
+    }
+
+    String getStatesName(int [] states)
+    {
+        String statesName="";
+        for (int s : states)
+        {
+            boolean found=false;
+            for (int d = 0;d<DrawableStates.length;d++)
+            {
+                if (s==DrawableStates[d])
+                {
+                    if (statesName.length()>0)
+                        statesName+="__";
+                    statesName+=DrawableStatesLabels[d];
+                    found=true;
+                    break;
+                }
+                else if (s==-DrawableStates[d])
+                {
+                    if (statesName.length()>0)
+                        statesName+="__";
+                    statesName+=DisableDrawableStatesLabels[d];
+                    found=true;
+                    break;
+                }
+            }
+            if (!found)
+            {
+                if (statesName.length()>0)
+                    statesName+=";";
+                statesName+=s;
+            }
+        }
+        if (statesName.length()>0)
+            return statesName;
+        return "empty";
+    }
+
+    private JSONObject getLayerDrawable(Object drawable, String filename)
+    {
+        JSONObject json = new JSONObject();
+        LayerDrawable layers = (LayerDrawable) drawable;
+        final int nr=layers.getNumberOfLayers();
+        try {
+            JSONArray array =new JSONArray();
+            for (int i = 0; i < nr; i++)
+            {
+                int id = layers.getId(i);
+                if (id == -1)
+                    id = i;
+                JSONObject layerJsonObject=getDrawable(layers.getDrawable(i), filename+"__"+id, null);
+                layerJsonObject.put("id", id);
+                array.put(layerJsonObject);
+            }
+            json.put("type", "layer");
+            Rect padding = new Rect();
+            if (layers.getPadding(padding))
+                json.put("padding", getJsonRect(padding));
+            json.put("layers", array);
+        } catch (JSONException e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    private JSONObject getStateListDrawable(Object drawable, String filename)
+    {
+        JSONObject json = new JSONObject();
+        try {
+            StateListDrawable stateList = (StateListDrawable) drawable;
+            final int numStates = (Integer) StateListDrawable.class.getMethod("getStateCount").invoke(stateList);
+            JSONArray array =new JSONArray();
+            for (int i = 0; i < numStates; i++)
+            {
+                JSONObject stateJson = new JSONObject();
+                final Drawable d =  (Drawable) StateListDrawable.class.getMethod("getStateDrawable", Integer.TYPE).invoke(stateList, i);
+                final int [] states = (int[]) StateListDrawable.class.getMethod("getStateSet", Integer.TYPE).invoke(stateList, i);
+                if (states == null)
+                    continue;
+                stateJson.put("states", getStatesList(states));
+                stateJson.put("drawable", getDrawable(d, filename+"__"+getStatesName(states), null));
+                array.put(stateJson);
+            }
+            json.put("type", "stateslist");
+            Rect padding = new Rect();
+            if (stateList.getPadding(padding))
+                json.put("padding", getJsonRect(padding));
+            json.put("stateslist", array);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    private JSONObject getGradientDrawable(GradientDrawable drawable) {
+        JSONObject json = new JSONObject();
+        try {
+            json.put("type", "gradient");
+            Object obj=drawable.getConstantState();
+            Class<?> gradientStateClass=obj.getClass();
+            json.put("shape",gradientStateClass.getField("mShape").getInt(obj));
+            json.put("gradient",gradientStateClass.getField("mGradient").getInt(obj));
+            GradientDrawable.Orientation orientation=(Orientation) gradientStateClass.getField("mOrientation").get(obj);
+            json.put("orientation",orientation.name());
+            int [] intArray=(int[]) gradientStateClass.getField("mColors").get(obj);
+            json.put("colors",getJsonArray(intArray, 0, intArray.length));
+            json.put("positions",getJsonArray((float[]) gradientStateClass.getField("mPositions").get(obj)));
+            json.put("strokeWidth",gradientStateClass.getField("mStrokeWidth").getInt(obj));
+            json.put("strokeDashWidth",gradientStateClass.getField("mStrokeDashWidth").getFloat(obj));
+            json.put("strokeDashGap",gradientStateClass.getField("mStrokeDashGap").getFloat(obj));
+            json.put("radius",gradientStateClass.getField("mRadius").getFloat(obj));
+            float [] floatArray=(float[]) gradientStateClass.getField("mRadiusArray").get(obj);
+            if (floatArray!=null)
+                json.put("radiusArray",getJsonArray(floatArray));
+            Rect rc= (Rect) gradientStateClass.getField("mPadding").get(obj);
+            if (rc!=null)
+                json.put("padding",getJsonRect(rc));
+            json.put("width",gradientStateClass.getField("mWidth").getInt(obj));
+            json.put("height",gradientStateClass.getField("mHeight").getInt(obj));
+            json.put("innerRadiusRatio",gradientStateClass.getField("mInnerRadiusRatio").getFloat(obj));
+            json.put("thicknessRatio",gradientStateClass.getField("mThicknessRatio").getFloat(obj));
+            json.put("innerRadius",gradientStateClass.getField("mInnerRadius").getInt(obj));
+            json.put("thickness",gradientStateClass.getField("mThickness").getInt(obj));
+            if (Build.VERSION.SDK_INT < 20) {
+                json.put("solidColor",gradientStateClass.getField("mSolidColor").getInt(obj));
+                json.put("strokeColor",gradientStateClass.getField("mStrokeColor").getInt(obj));
+            }
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    private JSONObject getRotateDrawable(RotateDrawable drawable, String filename) {
+        JSONObject json = new JSONObject();
+        try {
+            json.put("type", "rotate");
+            Object obj = drawable.getConstantState();
+            Class<?> rotateStateClass = obj.getClass();
+            Field f = rotateStateClass.getDeclaredField("mDrawable");
+            f.setAccessible(true);
+            json.put("drawable", getDrawable(f.get(obj), filename, null));
+            f = rotateStateClass.getDeclaredField("mPivotX");
+            f.setAccessible(true);
+            json.put("pivotX", f.getFloat(obj));
+            f = rotateStateClass.getDeclaredField("mPivotXRel");
+            f.setAccessible(true);
+            json.put("pivotXRel", f.getBoolean(obj));
+            f = rotateStateClass.getDeclaredField("mPivotY");
+            f.setAccessible(true);
+            json.put("pivotY", f.getFloat(obj));
+            f = rotateStateClass.getDeclaredField("mPivotYRel");
+            f.setAccessible(true);
+            json.put("pivotYRel", f.getBoolean(obj));
+            f = rotateStateClass.getDeclaredField("mFromDegrees");
+            f.setAccessible(true);
+            json.put("fromDegrees", f.getFloat(obj));
+            f = rotateStateClass.getDeclaredField("mToDegrees");
+            f.setAccessible(true);
+            json.put("toDegrees", f.getFloat(obj));
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    private JSONObject getAnimationDrawable(AnimationDrawable drawable, String filename) {
+        JSONObject json = new JSONObject();
+        try {
+            json.put("type", "animation");
+            json.put("oneshot", drawable.isOneShot());
+            final int count = drawable.getNumberOfFrames();
+            JSONArray frames = new JSONArray();
+            for (int i = 0; i < count; ++i)
+            {
+                JSONObject frame = new JSONObject();
+                frame.put("duration", drawable.getDuration(i));
+                frame.put("drawable", getDrawable(drawable.getFrame(i), filename+"__"+i, null));
+                frames.put(frame);
+            }
+            json.put("frames", frames);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    private JSONObject getJsonRect(Rect rect) throws JSONException
+    {
+        JSONObject jsonRect = new JSONObject();
+        jsonRect.put("left", rect.left);
+        jsonRect.put("top", rect.top);
+        jsonRect.put("right", rect.right);
+        jsonRect.put("bottom", rect.bottom);
+        return jsonRect;
+
+    }
+
+    private JSONArray getJsonArray(int[] array, int pos, int len)
+    {
+        JSONArray a = new JSONArray();
+        final int l = pos+len;
+        for (int i=pos; i<l;i++)
+            a.put(array[i]);
+        return a;
+    }
+
+    private JSONArray getJsonArray(float[] array) throws JSONException
+    {
+        JSONArray a = new JSONArray();
+        if (array != null)
+            for (float val: array)
+                a.put(val);
+        return a;
+    }
+
+    private JSONObject getJsonChunkInfo(int[] chunkData) throws JSONException
+    {
+        JSONObject jsonRect = new JSONObject();
+        if (chunkData == null)
+            return jsonRect;
+
+        jsonRect.put("xdivs", getJsonArray(chunkData, 3, chunkData[0]));
+        jsonRect.put("ydivs", getJsonArray(chunkData, 3 + chunkData[0], chunkData[1]));
+        jsonRect.put("colors", getJsonArray(chunkData, 3 + chunkData[0] + chunkData[1], chunkData[2]));
+        return jsonRect;
+    }
+
+    private JSONObject findPatchesMarings(Drawable d) throws JSONException, NoSuchFieldException, IllegalAccessException
+    {
+        Field mNinePatch = ((NinePatchDrawable)d).getClass().getDeclaredField("mNinePatch");
+        mNinePatch.setAccessible(true);
+        NinePatch np = (NinePatch) mNinePatch.get(d);
+        if (Build.VERSION.SDK_INT < 19)
+        {
+            Field mChunk = np.getClass().getDeclaredField("mChunk");
+            mChunk.setAccessible(true);
+            return getJsonChunkInfo(extractChunkInfo((byte[]) mChunk.get(np)));
+        }
+        else
+        {
+            Field mNativeChunk = np.getClass().getDeclaredField("mNativeChunk");
+            mNativeChunk.setAccessible(true);
+            if (Build.VERSION.SDK_INT > 19)
+                return getJsonChunkInfo(extractNativeChunkInfo20(mNativeChunk.getLong(np)));
+            return getJsonChunkInfo(extractNativeChunkInfo(mNativeChunk.getInt(np)));
+        }
+    }
+
+    class DrawableCache
+    {
+        public DrawableCache(JSONObject json, Object drawable)
+        {
+            object = json;
+            this.drawable = drawable;
+        }
+        JSONObject object;
+        Object drawable;
+    }
+    private HashMap<String, DrawableCache> m_drawableCache = new HashMap<String, DrawableCache>();
+
+    public JSONObject getDrawable(Object drawable, String filename, Rect padding)
+    {
+        DrawableCache dc = m_drawableCache.get(filename);
+        if (dc != null)
+        {
+            if (dc.drawable.equals(drawable))
+                return dc.object;
+            else
+                Log.e(QtNative.QtTAG, "Different drawable objects points to the same file name \"" + filename +"\"");
+        }
+        JSONObject json = new JSONObject();
+        Bitmap bmp = null;
+        if (drawable instanceof Bitmap)
+            bmp = (Bitmap) drawable;
+        else
+        {
+            if (drawable instanceof BitmapDrawable)
+                bmp = ((BitmapDrawable)drawable).getBitmap();
+            else
+            {
+                if (drawable instanceof ScaleDrawable)
+                {
+                    return getDrawable(((ScaleDrawable)drawable).getDrawable(), filename, null);
+                }
+                if (drawable instanceof LayerDrawable)
+                {
+                    return getLayerDrawable(drawable, filename);
+                }
+                if (drawable instanceof StateListDrawable)
+                {
+                    return getStateListDrawable(drawable, filename);
+                }
+                if (drawable instanceof GradientDrawable)
+                {
+                    return getGradientDrawable((GradientDrawable) drawable);
+                }
+                if (drawable instanceof RotateDrawable)
+                {
+                    return getRotateDrawable((RotateDrawable) drawable, filename);
+                }
+                if (drawable instanceof AnimationDrawable)
+                {
+                    return getAnimationDrawable((AnimationDrawable) drawable, filename);
+                }
+                if (drawable instanceof ClipDrawable)
+                {
+                    try {
+                        json.put("type", "clipDrawable");
+                        Drawable.ConstantState dcs = ((ClipDrawable)drawable).getConstantState();
+                        Field f = dcs.getClass().getDeclaredField("mDrawable");
+                        f.setAccessible(true);
+                        json.put("drawable", getDrawable(f.get(dcs), filename, null));
+                        if (null != padding)
+                            json.put("padding", getJsonRect(padding));
+                        else {
+                            Rect _padding = new Rect();
+                            if (((Drawable) drawable).getPadding(_padding))
+                                json.put("padding", getJsonRect(_padding));
+                        }
+                    } catch (Exception e) {
+                        e.printStackTrace();
+                    }
+                    return json;
+                }
+                if (drawable instanceof ColorDrawable)
+                {
+                    bmp = Bitmap.createBitmap(1, 1, Config.ARGB_8888);
+                    Drawable d = (Drawable) drawable;
+                    d.setBounds(0, 0, 1, 1);
+                    d.draw(new Canvas(bmp));
+                    try {
+                        json.put("type", "color");
+                        json.put("color", bmp.getPixel(0, 0));
+                        if (null != padding)
+                            json.put("padding", getJsonRect(padding));
+                        else {
+                            Rect _padding = new Rect();
+                            if (d.getPadding(_padding))
+                                json.put("padding", getJsonRect(_padding));
+                        }
+                    } catch (JSONException e) {
+                        e.printStackTrace();
+                    }
+                    return json;
+                }
+                if (drawable instanceof InsetDrawable)
+                {
+                    try {
+                        InsetDrawable d = (InsetDrawable)drawable;
+                        Field mInsetState = d.getClass().getDeclaredField("mInsetState");
+                        mInsetState.setAccessible(true);
+                        Object mInsetStateObject = mInsetState.get(drawable);
+                        Field mDrawable = mInsetStateObject.getClass().getDeclaredField("mDrawable");
+                        mDrawable.setAccessible(true);
+                        Rect _padding = new Rect();
+                        boolean hasPadding = d.getPadding(_padding);
+                        return getDrawable(mDrawable.get(mInsetStateObject), filename, hasPadding ? _padding : null);
+                    } catch (Exception e) {
+                        e.printStackTrace();
+                    }
+                }
+                else
+                {
+                    Drawable d = (Drawable) drawable;
+                    int w=d.getIntrinsicWidth();
+                    int h=d.getIntrinsicHeight();
+                    d.setLevel(10000);
+                    if (w<1 || h< 1)
+                    {
+                        w=100;
+                        h=100;
+                    }
+                    bmp = Bitmap.createBitmap(w, h, Config.ARGB_8888);
+                    d.setBounds(0, 0, w, h);
+                    d.draw(new Canvas(bmp));
+                    if (drawable instanceof NinePatchDrawable)
+                    {
+                        NinePatchDrawable npd = (NinePatchDrawable) drawable;
+                        try {
+                            json.put("type", "9patch");
+                            json.put("drawable", getDrawable(bmp, filename, null));
+                            if (padding != null)
+                                json.put("padding", getJsonRect(padding));
+                            else {
+                                Rect _padding = new Rect();
+                                if (npd.getPadding(_padding))
+                                    json.put("padding", getJsonRect(_padding));
+                            }
+
+                            json.put("chunkInfo", findPatchesMarings(d));
+                            return json;
+                        } catch (Exception e) {
+                            e.printStackTrace();
+                        }
+                    }
+                }
+            }
+        }
+        FileOutputStream out;
+        try {
+            filename = m_extractPath+filename+".png";
+            out = new FileOutputStream(filename);
+            bmp.compress(Bitmap.CompressFormat.PNG, 100, out);
+            out.close();
+        } catch (FileNotFoundException e) {
+            e.printStackTrace();
+        } catch (IOException e) {
+            e.printStackTrace();
+        }
+        try {
+            json.put("type", "image");
+            json.put("path", filename);
+            json.put("width", bmp.getWidth());
+            json.put("height", bmp.getHeight());
+            m_drawableCache.put(filename, new DrawableCache(json, drawable));
+//            MinistroActivity.nativeChmode(filename, 0644);
+        } catch (JSONException e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    public void extractViewInformations(String styleName, int styleId, JSONObject json, String qtClassName, AttributeSet attribSet)
+    {
+        try {
+            int[] viewAttrs;
+            viewAttrs = (int[]) styleableClass.getDeclaredField("View").get(null);
+            TypedArray a =m_theme.obtainStyledAttributes(attribSet, viewAttrs, styleId, 0);
+
+            if (null != qtClassName)
+                json.put("qtClass", qtClassName);
+            json.put("defaultBackgroundColor", defaultBackgroundColor);
+            json.put("defaultTextColorPrimary", defaultTextColor);
+            final int N = a.getIndexCount();
+            for (int i = 0; i < N; i++) {
+                int attr = a.getIndex(i);
+                if (attr == View_background)
+                    json.put("View_background", getDrawable(a.getDrawable(attr), styleName + "_View_background", null));
+                else if (attr == View_padding)
+                    json.put("View_padding", a.getDimensionPixelSize(attr, -1));
+                else if (attr == View_paddingLeft)
+                    json.put("View_paddingLeft", a.getDimensionPixelSize(attr, -1));
+                else if (attr == View_paddingTop)
+                    json.put("View_paddingTop", a.getDimensionPixelSize(attr, -1));
+                else if (attr == View_paddingRight)
+                    json.put("View_paddingRight", a.getDimensionPixelSize(attr, -1));
+                else if (attr == View_paddingBottom)
+                    json.put("View_paddingBottom", a.getDimensionPixelSize(attr, -1));
+                else if (attr == View_scrollX)
+                    json.put("View_paddingBottom", a.getDimensionPixelOffset(attr, 0));
+                else if (attr == View_scrollY)
+                    json.put("View_scrollY", a.getDimensionPixelOffset(attr, 0));
+                else if (attr == View_id)
+                    json.put("View_id", a.getResourceId(attr, -1));
+                else if (attr == View_tag)
+                    json.put("View_tag", a.getText(attr));
+                else if (attr == View_fitsSystemWindows)
+                    json.put("View_fitsSystemWindows", a.getBoolean(attr, false));
+                else if (attr == View_focusable)
+                    json.put("View_focusable", a.getBoolean(attr, false));
+                else if (attr == View_focusableInTouchMode)
+                    json.put("View_focusableInTouchMode", a.getBoolean(attr, false));
+                else if (attr == View_clickable)
+                    json.put("View_clickable", a.getBoolean(attr, false));
+                else if (attr == View_longClickable)
+                    json.put("View_longClickable", a.getBoolean(attr, false));
+                else if (attr == View_saveEnabled)
+                    json.put("View_saveEnabled", a.getBoolean(attr, true));
+                else if (attr == View_duplicateParentState)
+                    json.put("View_duplicateParentState", a.getBoolean(attr, false));
+                else if (attr == View_visibility)
+                    json.put("View_visibility", a.getInt(attr, 0));
+                else if (attr == View_drawingCacheQuality)
+                    json.put("View_drawingCacheQuality", a.getInt(attr, 0));
+                else if (attr == View_drawingCacheQuality)
+                    json.put("View_contentDescription", a.getString(attr));
+                else if (attr == View_soundEffectsEnabled)
+                    json.put("View_soundEffectsEnabled", a.getBoolean(attr, true));
+                else if (attr == View_hapticFeedbackEnabled)
+                    json.put("View_hapticFeedbackEnabled", a.getBoolean(attr, true));
+                else if (attr == View_scrollbars)
+                    json.put("View_scrollbars", a.getInt(attr, 0));
+                else if (attr == View_fadingEdge)
+                    json.put("View_fadingEdge", a.getInt(attr, 0));
+                else if (attr == View_scrollbarStyle)
+                    json.put("View_scrollbarStyle", a.getInt(attr, 0));
+                else if (attr == View_scrollbarFadeDuration)
+                    json.put("View_scrollbarFadeDuration", a.getInt(attr, 0));
+                else if (attr == View_scrollbarDefaultDelayBeforeFade)
+                    json.put("View_scrollbarDefaultDelayBeforeFade", a.getInt(attr, 0));
+                else if (attr == View_scrollbarSize)
+                    json.put("View_scrollbarSize", a.getDimensionPixelSize(attr, -1));
+                else if (attr == View_scrollbarThumbHorizontal)
+                    json.put("View_scrollbarThumbHorizontal", getDrawable(a.getDrawable(attr), styleName + "_View_scrollbarThumbHorizontal", null));
+                else if (attr == View_scrollbarThumbVertical)
+                    json.put("View_scrollbarThumbVertical", getDrawable(a.getDrawable(attr), styleName + "_View_scrollbarThumbVertical", null));
+                else if (attr == View_scrollbarTrackHorizontal)
+                    json.put("View_scrollbarTrackHorizontal", getDrawable(a.getDrawable(attr), styleName + "_View_scrollbarTrackHorizontal", null));
+                else if (attr == View_scrollbarTrackVertical)
+                    json.put("View_scrollbarTrackVertical", getDrawable(a.getDrawable(attr), styleName + "_View_scrollbarTrackVertical", null));
+                else if (attr == View_isScrollContainer)
+                    json.put("View_isScrollContainer", a.getBoolean(attr, false));
+                else if (attr == View_keepScreenOn)
+                    json.put("View_keepScreenOn", a.getBoolean(attr, false));
+                else if (attr == View_filterTouchesWhenObscured)
+                    json.put("View_filterTouchesWhenObscured", a.getBoolean(attr, false));
+                else if (attr == View_nextFocusLeft)
+                    json.put("View_nextFocusLeft", a.getResourceId(attr, -1));
+                else if (attr == View_nextFocusRight)
+                    json.put("View_nextFocusRight", a.getResourceId(attr, -1));
+                else if (attr == View_nextFocusUp)
+                    json.put("View_nextFocusUp", a.getResourceId(attr, -1));
+                else if (attr == View_nextFocusDown)
+                    json.put("View_nextFocusDown", a.getResourceId(attr, -1));
+                else if (attr == View_minWidth)
+                    json.put("View_minWidth", a.getDimensionPixelSize(attr, 0));
+                else if (attr == View_minHeight)
+                    json.put("View_minHeight", a.getDimensionPixelSize(attr, 0));
+                else if (attr == View_onClick)
+                    json.put("View_onClick", a.getString(attr));
+                else if (attr == View_overScrollMode)
+                    json.put("View_overScrollMode", a.getInt(attr, 1));
+                else if (attr == View_paddingStart)
+                    json.put("View_paddingStart", a.getDimensionPixelSize(attr, 0));
+                else if (attr == View_paddingEnd)
+                    json.put("View_paddingEnd", a.getDimensionPixelSize(attr, 0));
+            }
+            a.recycle();
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    public JSONObject extractTextAppearance(int styleId)
+    {
+        JSONObject json = new JSONObject();
+        try
+        {
+            TypedArray a = m_theme.obtainStyledAttributes(styleId, (int[]) styleableClass.getDeclaredField("TextAppearance").get(null));
+            int n = a.getIndexCount();
+            for (int i = 0; i < n; i++)
+            {
+                int attr = a.getIndex(i);
+                if (attr == TextAppearance_textColorHighlight)
+                    json.put("TextAppearance_textColorHighlight", a.getColor(attr, 0));
+                else if (attr == TextAppearance_textColor)
+                    json.put("TextAppearance_textColor", getColorStateList(a.getColorStateList(attr)));
+                else if (attr == TextAppearance_textColorHint)
+                    json.put("TextAppearance_textColorHint", getColorStateList(a.getColorStateList(attr)));
+                else if (attr == TextAppearance_textColorLink)
+                    json.put("TextAppearance_textColorLink", getColorStateList(a.getColorStateList(attr)));
+                else if (attr == TextAppearance_textSize)
+                    json.put("TextAppearance_textSize", a.getDimensionPixelSize(attr, 15));
+                else if (attr == TextAppearance_typeface)
+                    json.put("TextAppearance_typeface", a.getInt(attr, -1));
+                else if (attr == TextAppearance_textStyle)
+                    json.put("TextAppearance_textStyle", a.getInt(attr, -1));
+                else if (attr == TextAppearance_textAllCaps)
+                    json.put("TextAppearance_textAllCaps", a.getBoolean(attr, false));
+            }
+            a.recycle();
+        }
+        catch (Exception e)
+        {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    public JSONObject extractTextAppearanceInformations(String styleName, String qtClass, AttributeSet attribSet, int textAppearance)
+    {
+        JSONObject json = new JSONObject();
+        try
+        {
+            int textColorHighlight = 0; //
+            ColorStateList textColor = null; //
+            ColorStateList textColorHint = null; //
+            ColorStateList textColorLink = null; //
+            int textSize = 15; //
+            int typefaceIndex = -1; //
+            int styleIndex = -1;
+            boolean allCaps = false;
+
+            Class<?> attrClass= Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            extractViewInformations(styleName, styleId, json, qtClass, attribSet);
+
+            int[] textViewAttrs=(int[]) styleableClass.getDeclaredField("TextView").get(null);
+            TypedArray a =m_theme.obtainStyledAttributes(null, textViewAttrs, styleId, 0);
+
+            TypedArray appearance = null;
+            if (-1==textAppearance)
+                textAppearance = a.getResourceId(styleableClass.getDeclaredField("TextView_textAppearance").getInt(null), -1);
+
+            if (textAppearance != -1)
+                appearance = m_theme.obtainStyledAttributes(textAppearance, (int[]) styleableClass.getDeclaredField("TextAppearance").get(null));
+
+            if (appearance != null)
+            {
+                int n = appearance.getIndexCount();
+                for (int i = 0; i < n; i++)
+                {
+                    int attr = appearance.getIndex(i);
+                    if (attr == TextAppearance_textColorHighlight)
+                        textColorHighlight = appearance.getColor(attr, textColorHighlight);
+                    else if (attr == TextAppearance_textColor)
+                        textColor = appearance.getColorStateList(attr);
+                    else if (attr == TextAppearance_textColorHint)
+                        textColorHint = appearance.getColorStateList(attr);
+                    else if (attr == TextAppearance_textColorLink)
+                        textColorLink = appearance.getColorStateList(attr);
+                    else if (attr == TextAppearance_textSize)
+                        textSize = appearance.getDimensionPixelSize(attr, textSize);
+                    else if (attr == TextAppearance_typeface)
+                        typefaceIndex = appearance.getInt(attr, -1);
+                    else if (attr == TextAppearance_textStyle)
+                        styleIndex = appearance.getInt(attr, -1);
+                    else if (attr == TextAppearance_textAllCaps)
+                        allCaps = appearance.getBoolean(attr, false);
+                }
+                appearance.recycle();
+            }
+
+            int n = a.getIndexCount();
+
+            for (int i = 0; i < n; i++) {
+                int attr = a.getIndex(i);
+
+                if (attr == TextView_editable)
+                    json.put("TextView_editable", a.getBoolean(attr, false));
+                else if (attr == TextView_inputMethod)
+                    json.put("TextView_inputMethod", a.getText(attr));
+                else if (attr == TextView_numeric)
+                    json.put("TextView_numeric", a.getInt(attr, 0));
+                else if (attr == TextView_digits)
+                    json.put("TextView_digits", a.getText(attr));
+                else if (attr == TextView_phoneNumber)
+                    json.put("TextView_phoneNumber", a.getBoolean(attr, false));
+                else if (attr == TextView_autoText)
+                    json.put("TextView_autoText", a.getBoolean(attr, false));
+                else if (attr == TextView_capitalize)
+                    json.put("TextView_capitalize", a.getInt(attr, -1));
+                else if (attr == TextView_bufferType)
+                    json.put("TextView_bufferType", a.getInt(attr, 0));
+                else if (attr == TextView_selectAllOnFocus)
+                    json.put("TextView_selectAllOnFocus", a.getBoolean(attr, false));
+                else if (attr == TextView_autoLink)
+                    json.put("TextView_autoLink", a.getInt(attr, 0));
+                else if (attr == TextView_linksClickable)
+                    json.put("TextView_linksClickable", a.getBoolean(attr, true));
+                else if (attr == TextView_linksClickable)
+                    json.put("TextView_linksClickable", a.getBoolean(attr, true));
+                else if (attr == TextView_drawableLeft)
+                    json.put("TextView_drawableLeft", getDrawable(a.getDrawable(attr), styleName + "_TextView_drawableLeft", null));
+                else if (attr == TextView_drawableTop)
+                    json.put("TextView_drawableTop", getDrawable(a.getDrawable(attr), styleName + "_TextView_drawableTop", null));
+                else if (attr == TextView_drawableRight)
+                    json.put("TextView_drawableRight", getDrawable(a.getDrawable(attr), styleName + "_TextView_drawableRight", null));
+                else if (attr == TextView_drawableBottom)
+                    json.put("TextView_drawableBottom", getDrawable(a.getDrawable(attr), styleName + "_TextView_drawableBottom", null));
+                else if (attr == TextView_drawableStart)
+                    json.put("TextView_drawableStart", getDrawable(a.getDrawable(attr), styleName + "_TextView_drawableStart", null));
+                else if (attr == TextView_drawableEnd)
+                    json.put("TextView_drawableEnd", getDrawable(a.getDrawable(attr), styleName + "_TextView_drawableEnd", null));
+                else if (attr == TextView_drawablePadding)
+                    json.put("TextView_drawablePadding", a.getDimensionPixelSize(attr, 0));
+                else if (attr == TextView_textCursorDrawable)
+                    json.put("TextView_textCursorDrawable", getDrawable(m_context.getResources().getDrawable(a.getResourceId(attr, 0)), styleName + "_TextView_textCursorDrawable", null));
+                else if (attr == TextView_maxLines)
+                    json.put("TextView_maxLines", a.getInt(attr, -1));
+                else if (attr == TextView_maxHeight)
+                    json.put("TextView_maxHeight", a.getDimensionPixelSize(attr, -1));
+                else if (attr == TextView_lines)
+                    json.put("TextView_lines", a.getInt(attr, -1));
+                else if (attr == TextView_height)
+                    json.put("TextView_height", a.getDimensionPixelSize(attr, -1));
+                else if (attr == TextView_minLines)
+                    json.put("TextView_minLines", a.getInt(attr, -1));
+                else if (attr == TextView_minHeight)
+                    json.put("TextView_minHeight", a.getDimensionPixelSize(attr, -1));
+                else if (attr == TextView_maxEms)
+                    json.put("TextView_maxEms", a.getInt(attr, -1));
+                else if (attr == TextView_maxWidth)
+                    json.put("TextView_maxWidth", a.getDimensionPixelSize(attr, -1));
+                else if (attr == TextView_ems)
+                    json.put("TextView_ems", a.getInt(attr, -1));
+                else if (attr == TextView_width)
+                    json.put("TextView_width", a.getDimensionPixelSize(attr, -1));
+                else if (attr == TextView_minEms)
+                    json.put("TextView_minEms", a.getInt(attr, -1));
+                else if (attr == TextView_minWidth)
+                    json.put("TextView_minWidth", a.getDimensionPixelSize(attr, -1));
+                else if (attr == TextView_gravity)
+                    json.put("TextView_gravity", a.getInt(attr, -1));
+                else if (attr == TextView_hint)
+                    json.put("TextView_hint", a.getText(attr));
+                else if (attr == TextView_text)
+                    json.put("TextView_text", a.getText(attr));
+                else if (attr == TextView_scrollHorizontally)
+                    json.put("TextView_scrollHorizontally", a.getBoolean(attr, false));
+                else if (attr == TextView_singleLine)
+                    json.put("TextView_singleLine", a.getBoolean(attr, false));
+                else if (attr == TextView_ellipsize)
+                    json.put("TextView_ellipsize", a.getInt(attr, -1));
+                else if (attr == TextView_marqueeRepeatLimit)
+                    json.put("TextView_marqueeRepeatLimit", a.getInt(attr, 3));
+                else if (attr == TextView_includeFontPadding)
+                    json.put("TextView_includeFontPadding", a.getBoolean(attr, true));
+                else if (attr == TextView_cursorVisible)
+                    json.put("TextView_cursorVisible", a.getBoolean(attr, true));
+                else if (attr == TextView_maxLength)
+                    json.put("TextView_maxLength", a.getInt(attr, -1));
+                else if (attr == TextView_textScaleX)
+                    json.put("TextView_textScaleX", a.getFloat(attr, 1.0f));
+                else if (attr == TextView_freezesText)
+                    json.put("TextView_freezesText", a.getBoolean(attr, false));
+                else if (attr == TextView_shadowColor)
+                    json.put("TextView_shadowColor", a.getInt(attr, 0));
+                else if (attr == TextView_shadowDx)
+                    json.put("TextView_shadowDx", a.getFloat(attr, 0));
+                else if (attr == TextView_shadowDy)
+                    json.put("TextView_shadowDy", a.getFloat(attr, 0));
+                else if (attr == TextView_shadowRadius)
+                    json.put("TextView_shadowRadius", a.getFloat(attr, 0));
+                else if (attr == TextView_enabled)
+                    json.put("TextView_enabled", a.getBoolean(attr,true));
+                else if (attr == TextView_textColorHighlight)
+                    textColorHighlight = a.getColor(attr, textColorHighlight);
+                else if (attr == TextView_textColor)
+                    textColor = a.getColorStateList(attr);
+                else if (attr == TextView_textColorHint)
+                    textColorHint = a.getColorStateList(attr);
+                else if (attr == TextView_textColorLink)
+                    textColorLink = a.getColorStateList(attr);
+                else if (attr == TextView_textSize)
+                    textSize = a.getDimensionPixelSize(attr, textSize);
+                else if (attr == TextView_typeface)
+                    typefaceIndex = a.getInt(attr, typefaceIndex);
+                else if (attr == TextView_textStyle)
+                    styleIndex = a.getInt(attr, styleIndex);
+                else if (attr == TextView_password)
+                    json.put("TextView_password", a.getBoolean(attr,false));
+                else if (attr == TextView_lineSpacingExtra)
+                    json.put("TextView_lineSpacingExtra", a.getDimensionPixelSize(attr, 0));
+                else if (attr == TextView_lineSpacingMultiplier)
+                    json.put("TextView_lineSpacingMultiplier", a.getFloat(attr, 1.0f));
+                else if (attr == TextView_inputType)
+                    json.put("TextView_inputType", a.getInt(attr, EditorInfo.TYPE_NULL));
+                else if (attr == TextView_imeOptions)
+                    json.put("TextView_imeOptions", a.getInt(attr, EditorInfo.IME_NULL));
+                else if (attr == TextView_imeActionLabel)
+                    json.put("TextView_imeActionLabel", a.getText(attr));
+                else if (attr == TextView_imeActionId)
+                    json.put("TextView_imeActionId", a.getInt(attr,0));
+                else if (attr == TextView_privateImeOptions)
+                    json.put("TextView_privateImeOptions", a.getString(attr));
+                else if (attr == TextView_textSelectHandleLeft && styleName.equals("textViewStyle"))
+                    json.put("TextView_textSelectHandleLeft", getDrawable(m_context.getResources().getDrawable(a.getResourceId(attr, 0)), styleName + "_TextView_textSelectHandleLeft", null));
+                else if (attr == TextView_textSelectHandleRight  && styleName.equals("textViewStyle"))
+                    json.put("TextView_textSelectHandleRight", getDrawable(m_context.getResources().getDrawable(a.getResourceId(attr, 0)), styleName + "_TextView_textSelectHandleRight", null));
+                else if (attr == TextView_textSelectHandle  && styleName.equals("textViewStyle"))
+                    json.put("TextView_textSelectHandle", getDrawable(m_context.getResources().getDrawable(a.getResourceId(attr, 0)), styleName + "_TextView_textSelectHandle", null));
+                else if (attr == TextView_textIsSelectable)
+                    json.put("TextView_textIsSelectable", a.getBoolean(attr, false));
+                else if (attr == TextView_textAllCaps)
+                    allCaps = a.getBoolean(attr, false);
+            }
+            a.recycle();
+
+            json.put("TextAppearance_textColorHighlight",textColorHighlight);
+            json.put("TextAppearance_textColor", getColorStateList(textColor));
+            json.put("TextAppearance_textColorHint", getColorStateList(textColorHint));
+            json.put("TextAppearance_textColorLink", getColorStateList(textColorLink));
+            json.put("TextAppearance_textSize",textSize);
+            json.put("TextAppearance_typeface",typefaceIndex);
+            json.put("TextAppearance_textStyle",styleIndex);
+            json.put("TextAppearance_textAllCaps",allCaps);
+        }
+        catch(Exception e)
+        {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    final String[] sScaleTypeArray = {
+        "MATRIX",
+        "FIT_XY",
+        "FIT_START",
+        "FIT_CENTER",
+        "FIT_END",
+        "CENTER",
+        "CENTER_CROP",
+        "CENTER_INSIDE"
+    };
+
+    public JSONObject extractImageViewInformations(String styleName, String qtClassName )
+    {
+        JSONObject json = new JSONObject();
+        try
+        {
+            Class<?> attrClass= Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            extractViewInformations(styleName, styleId, json, qtClassName, null);
+
+            int[] imageViewAttrs=(int[]) styleableClass.getDeclaredField("ImageView").get(null);
+            TypedArray a =m_theme.obtainStyledAttributes(null, imageViewAttrs, styleId, 0);
+            Drawable d = a.getDrawable(ImageView_src);
+            if (d != null)
+                json.put("ImageView_src", getDrawable(d, styleName + "_ImageView_src", null));
+
+            json.put("ImageView_baselineAlignBottom", a.getBoolean(ImageView_baselineAlignBottom, false));
+            json.put("ImageView_adjustViewBounds", a.getBoolean(ImageView_adjustViewBounds, false));
+            json.put("ImageView_maxWidth", a.getDimensionPixelSize(ImageView_maxWidth, Integer.MAX_VALUE));
+            json.put("ImageView_maxHeight", a.getDimensionPixelSize(ImageView_maxHeight, Integer.MAX_VALUE));
+            int index = a.getInt(ImageView_scaleType, -1);
+            if (index >= 0)
+                json.put("ImageView_scaleType", sScaleTypeArray[index]);
+
+            int tint = a.getInt(ImageView_tint, 0);
+            if (tint != 0)
+                json.put("ImageView_tint", tint);
+
+
+            json.put("ImageView_cropToPadding",a.getBoolean(ImageView_cropToPadding, false));
+            a.recycle();
+        }
+        catch(Exception e)
+        {
+            e.printStackTrace();
+        }
+        return json;
+
+    }
+
+    void extractCompoundButton(SimpleJsonWriter jsonWriter, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        Class<?> attrClass;
+        try {
+            attrClass = Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+            int[] compoundButtonAttrs=(int[]) styleableClass.getDeclaredField("CompoundButton").get(null);
+
+            TypedArray a = m_theme.obtainStyledAttributes(
+                        null, compoundButtonAttrs, styleId, 0);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"CompoundButton_button"));
+            if (d != null)
+                json.put("CompoundButton_button", getDrawable(d, styleName + "_CompoundButton_button", null));
+
+            a.recycle();
+            jsonWriter.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractProgressBarInfo(JSONObject json, String styleName)
+    {
+        Class<?> attrClass;
+        try {
+            attrClass = Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+            int[] progressBarAttrs=(int[]) styleableClass.getDeclaredField("ProgressBar").get(null);
+
+            TypedArray a = m_theme.obtainStyledAttributes(null, progressBarAttrs, styleId, 0);
+            int mMinWidth = 24;
+            int mMaxWidth = 48;
+            int mMinHeight = 24;
+            int mMaxHeight = 48;
+            mMinWidth = a.getDimensionPixelSize(getField(styleableClass, "ProgressBar_minWidth"), mMinWidth);
+            mMaxWidth = a.getDimensionPixelSize(getField(styleableClass, "ProgressBar_maxWidth"), mMaxWidth);
+            mMinHeight = a.getDimensionPixelSize(getField(styleableClass, "ProgressBar_minHeight"), mMinHeight);
+            mMaxHeight = a.getDimensionPixelSize(getField(styleableClass, "ProgressBar_maxHeight"), mMaxHeight);
+
+            json.put("ProgressBar_indeterminateDuration", a.getInt(getField(styleableClass, "ProgressBar_indeterminateDuration"), 4000));
+            json.put("ProgressBar_minWidth", mMinWidth);
+            json.put("ProgressBar_maxWidth", mMaxWidth);
+            json.put("ProgressBar_minHeight", mMinHeight);
+            json.put("ProgressBar_maxHeight", mMaxHeight);
+            json.put("ProgressBar_progress_id", android.R.id.progress);
+            json.put("ProgressBar_secondaryProgress_id", android.R.id.secondaryProgress);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"ProgressBar_progressDrawable"));
+            if (d != null)
+                json.put("ProgressBar_progressDrawable", getDrawable(d, styleName + "_ProgressBar_progressDrawable", null));
+
+            d = a.getDrawable(getField(styleableClass,"ProgressBar_indeterminateDrawable"));
+            if (d != null)
+                json.put("ProgressBar_indeterminateDrawable", getDrawable(d, styleName + "_ProgressBar_indeterminateDrawable", null));
+
+            a.recycle();
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractProgressBar(SimpleJsonWriter writer, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        try {
+            extractProgressBarInfo(json, styleName);
+            writer.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractAbsSeekBar(SimpleJsonWriter jsonWriter, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        extractProgressBarInfo(json, styleName);
+        Class<?> attrClass;
+        try {
+            attrClass = Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+            int[] compoundButtonAttrs=(int[]) styleableClass.getDeclaredField("SeekBar").get(null);
+
+            TypedArray a = m_theme.obtainStyledAttributes(
+                        null, compoundButtonAttrs, styleId, 0);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"SeekBar_thumb"));
+            if (d != null)
+                json.put("SeekBar_thumb", getDrawable(d, styleName + "_SeekBar_thumb", null));
+
+            try {
+                json.put("SeekBar_thumbOffset", styleableClass.getDeclaredField("SeekBar_thumbOffset").getInt(null));
+            } catch (Exception e) {
+                e.printStackTrace();
+            }
+
+            a.recycle();
+            jsonWriter.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractSwitch(SimpleJsonWriter jsonWriter, String styleName, String qtClass)
+    {
+        JSONObject json = new JSONObject();
+        try {
+            Class<?> attrClass = Class.forName("com.android.internal.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            int[] switchAttrs = (int[]) styleableClass.getDeclaredField("Switch").get(null);
+            TypedArray a = m_theme.obtainStyledAttributes(null, switchAttrs, styleId, 0);
+
+            Drawable thumb = a.getDrawable(getField(styleableClass,"Switch_thumb"));
+            if (thumb != null)
+                json.put("Switch_thumb", getDrawable(thumb, styleName + "_Switch_thumb", null));
+
+            Drawable track = a.getDrawable(getField(styleableClass,"Switch_track"));
+            if (track != null)
+                json.put("Switch_track", getDrawable(track, styleName + "_Switch_track", null));
+
+            int textAppearance = a.getResourceId(styleableClass.getDeclaredField("Switch_switchTextAppearance").getInt(null), -1);
+            json.put("Switch_switchTextAppearance", extractTextAppearance(textAppearance));
+
+            json.put("Switch_textOn", a.getText(getField(styleableClass, "Switch_textOn")));
+            json.put("Switch_textOff", a.getText(getField(styleableClass, "Switch_textOff")));
+            json.put("Switch_switchMinWidth", a.getDimensionPixelSize(getField(styleableClass, "Switch_switchMinWidth"), 0));
+            json.put("Switch_switchPadding", a.getDimensionPixelSize(getField(styleableClass, "Switch_switchPadding"), 0));
+            json.put("Switch_thumbTextPadding", a.getDimensionPixelSize(getField(styleableClass, "Switch_thumbTextPadding"), 0));
+
+            a.recycle();
+            jsonWriter.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    JSONObject extractCheckedTextView(AttributeSet attribSet, String itemName)
+    {
+        JSONObject json = extractTextAppearanceInformations("textViewStyle", itemName, attribSet, -1);
+        try {
+            Class<?> attrClass= Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField("textViewStyle").getInt(null);
+            int[] compoundButtonAttrs=(int[]) styleableClass.getDeclaredField("CheckedTextView").get(null);
+
+            TypedArray a = m_theme.obtainStyledAttributes(attribSet, compoundButtonAttrs, styleId, 0);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"CheckedTextView_checkMark"));
+            if (d != null)
+                json.put("CheckedTextView_checkMark", getDrawable(d, itemName+"_CheckedTextView_checkMark", null));
+
+            a.recycle();
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return json;
+    }
+
+    private JSONObject extractItemStyle(int resourceId, String itemName, int textAppearance) {
+        try
+        {
+            XmlResourceParser parser = m_context.getResources().getLayout(resourceId);
+            int type;
+            while ((type = parser.next()) != XmlPullParser.START_TAG &&
+                    type != XmlPullParser.END_DOCUMENT) {
+                // Empty
+            }
+
+            if (type != XmlPullParser.START_TAG) {
+                return null;
+            }
+
+            AttributeSet attributes = Xml.asAttributeSet(parser);
+            String name = parser.getName();
+            if (name.equals("TextView"))
+                return extractTextAppearanceInformations("textViewStyle", itemName, attributes, textAppearance);
+            if (name.equals("CheckedTextView"))
+                return extractCheckedTextView(attributes, itemName);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+        return null;
+    }
+
+    private void extractItemsStyle(SimpleJsonWriter jsonWriter) {
+        try
+        {
+            jsonWriter.name("simple_list_item").value(extractItemStyle(android.R.layout.simple_list_item_1, "simple_list_item", android.R.style.TextAppearance_Large));
+            jsonWriter.name("simple_list_item_checked").value(extractItemStyle(android.R.layout.simple_list_item_checked, "simple_list_item_checked", android.R.style.TextAppearance_Large));
+            jsonWriter.name("simple_list_item_multiple_choice").value(extractItemStyle(android.R.layout.simple_list_item_multiple_choice, "simple_list_item_multiple_choice", android.R.style.TextAppearance_Large));
+            jsonWriter.name("simple_list_item_single_choice").value(extractItemStyle(android.R.layout.simple_list_item_single_choice, "simple_list_item_single_choice", android.R.style.TextAppearance_Large));
+            jsonWriter.name("simple_spinner_item").value(extractItemStyle(android.R.layout.simple_spinner_item, "simple_spinner_item", -1));
+            jsonWriter.name("simple_spinner_dropdown_item").value(extractItemStyle(android.R.layout.simple_spinner_dropdown_item, "simple_spinner_dropdown_item",android.R.style.TextAppearance_Large));
+            jsonWriter.name("simple_dropdown_item_1line").value(extractItemStyle(android.R.layout.simple_dropdown_item_1line, "simple_dropdown_item_1line",android.R.style.TextAppearance_Large));
+            if (Build.VERSION.SDK_INT > 10) {
+                Class<?> layoutClass = Class.forName("android.R$layout");
+                int styleId = layoutClass.getDeclaredField("simple_selectable_list_item").getInt(null);
+                jsonWriter.name("simple_selectable_list_item").value(extractItemStyle(styleId, "simple_selectable_list_item",android.R.style.TextAppearance_Large));
+            }
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractListView(SimpleJsonWriter writer, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        try {
+            Class<?> attrClass = Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            int[] styleAttrs = (int[]) styleableClass.getDeclaredField("ListView").get(null);
+            TypedArray a = m_theme.obtainStyledAttributes(null, styleAttrs, styleId, 0);
+
+            Drawable divider = a.getDrawable(getField(styleableClass,"ListView_divider"));
+            if (divider != null)
+                json.put("ListView_divider", getDrawable(divider, styleName + "_ListView_divider", null));
+
+            json.put("ListView_dividerHeight", a.getDimensionPixelSize(getField(styleableClass, "ListView_dividerHeight"), 0));
+
+            a.recycle();
+            writer.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractCalendar(SimpleJsonWriter writer, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        try {
+            Class<?> attrClass = Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            int[] styleAttrs = (int[]) styleableClass.getDeclaredField("CalendarView").get(null);
+            TypedArray a = m_theme.obtainStyledAttributes(null, styleAttrs, styleId, 0);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"CalendarView_selectedDateVerticalBar"));
+            if (d != null)
+                json.put("CalendarView_selectedDateVerticalBar", getDrawable(d, styleName + "_CalendarView_selectedDateVerticalBar", null));
+
+            int dateTextAppearance = a.getResourceId(styleableClass.getDeclaredField("CalendarView_dateTextAppearance").getInt(null), -1);
+            json.put("CalendarView_dateTextAppearance", extractTextAppearance(dateTextAppearance));
+
+            int weekDayTextAppearance = a.getResourceId(styleableClass.getDeclaredField("CalendarView_weekDayTextAppearance").getInt(null), -1);
+            json.put("CalendarView_weekDayTextAppearance", extractTextAppearance(weekDayTextAppearance));
+
+            json.put("CalendarView_firstDayOfWeek", a.getInt(getField(styleableClass, "CalendarView_firstDayOfWeek"), 0));
+            json.put("CalendarView_focusedMonthDateColor", a.getColor(getField(styleableClass, "CalendarView_focusedMonthDateColor"), 0));
+            json.put("CalendarView_selectedWeekBackgroundColor", a.getColor(getField(styleableClass, "CalendarView_selectedWeekBackgroundColor"), 0));
+            json.put("CalendarView_showWeekNumber", a.getBoolean(getField(styleableClass, "CalendarView_showWeekNumber"), true));
+            json.put("CalendarView_shownWeekCount", a.getInt(getField(styleableClass, "CalendarView_shownWeekCount"), 6));
+            json.put("CalendarView_unfocusedMonthDateColor", a.getColor(getField(styleableClass, "CalendarView_unfocusedMonthDateColor"), 0));
+            json.put("CalendarView_weekNumberColor", a.getColor(getField(styleableClass, "CalendarView_weekNumberColor"), 0));
+            json.put("CalendarView_weekSeparatorLineColor", a.getColor(getField(styleableClass, "CalendarView_weekSeparatorLineColor"), 0));
+
+            a.recycle();
+            writer.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractToolBar(SimpleJsonWriter writer, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        try {
+            Class<?> attrClass = Class.forName("com.android.internal.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            int[] styleAttrs = (int[]) styleableClass.getDeclaredField("ActionBar").get(null);
+            TypedArray a = m_theme.obtainStyledAttributes(null, styleAttrs, styleId, 0);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"ActionBar_background"));
+            if (d != null)
+                json.put("ActionBar_background", getDrawable(d, styleName + "_ActionBar_background", null));
+
+            d = a.getDrawable(getField(styleableClass,"ActionBar_backgroundStacked"));
+            if (d != null)
+                json.put("ActionBar_backgroundStacked", getDrawable(d, styleName + "_ActionBar_backgroundStacked", null));
+
+            d = a.getDrawable(getField(styleableClass,"ActionBar_backgroundSplit"));
+            if (d != null)
+                json.put("ActionBar_backgroundSplit", getDrawable(d, styleName + "_ActionBar_backgroundSplit", null));
+
+            d = a.getDrawable(getField(styleableClass,"ActionBar_divider"));
+            if (d != null)
+                json.put("ActionBar_divider", getDrawable(d, styleName + "_ActionBar_divider", null));
+
+            json.put("ActionBar_itemPadding", a.getDimensionPixelSize(getField(styleableClass, "ActionBar_itemPadding"), 0));
+
+            a.recycle();
+            writer.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    void extractTabBar(SimpleJsonWriter writer, String styleName, String qtClass)
+    {
+        JSONObject json = extractTextAppearanceInformations(styleName, qtClass, null, -1);
+        try {
+            Class<?> attrClass = Class.forName("android.R$attr");
+            int styleId = attrClass.getDeclaredField(styleName).getInt(null);
+
+            int[] styleAttrs = (int[]) styleableClass.getDeclaredField("LinearLayout").get(null);
+            TypedArray a = m_theme.obtainStyledAttributes(null, styleAttrs, styleId, 0);
+
+            Drawable d = a.getDrawable(getField(styleableClass,"LinearLayout_divider"));
+            if (d != null)
+                json.put("LinearLayout_divider", getDrawable(d, styleName + "_LinearLayout_divider", null));
+            json.put("LinearLayout_showDividers", a.getInt(getField(styleableClass, "LinearLayout_showDividers"), 0));
+            json.put("LinearLayout_dividerPadding", a.getDimensionPixelSize(getField(styleableClass, "LinearLayout_dividerPadding"), 0));
+
+            a.recycle();
+            writer.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    private void extractWindow(SimpleJsonWriter writer, String styleName) {
+        JSONObject json = new JSONObject();
+        try
+        {
+            Class<?> attrClass = Class.forName("android.R$attr");
+            int[] windowAttrs = (int[]) styleableClass.getDeclaredField("Window").get(null);
+
+            int backgroundId = attrClass.getDeclaredField("windowBackground").getInt(null);
+            TypedArray a = m_theme.obtainStyledAttributes(null, windowAttrs, backgroundId, 0);
+            Drawable background = a.getDrawable(getField(styleableClass, "Window_windowBackground"));
+            if (background != null)
+                json.put("Window_windowBackground", getDrawable(background, styleName + "_Window_windowBackground", null));
+            a.recycle();
+
+            int frameId = attrClass.getDeclaredField("windowFrame").getInt(null);
+            a = m_theme.obtainStyledAttributes(null, windowAttrs, frameId, 0);
+            Drawable frame = a.getDrawable(getField(styleableClass, "Window_windowFrame"));
+            if (frame != null)
+                json.put("Window_windowFrame", getDrawable(frame, styleName + "_Window_windowFrame", null));
+            a.recycle();
+
+            writer.name(styleName).value(json);
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+    }
+
+    public ExtractStyle(Context context, String extractPath)
+    {
+//        Log.i(MinistroService.TAG, "Extract " + extractPath);
+        m_extractPath = extractPath + "/";
+        new File(m_extractPath).mkdirs();
+//        MinistroActivity.nativeChmode(m_extractPath, 0755);
+        m_context = context;
+        m_theme = context.getTheme();
+        TypedArray array = m_theme.obtainStyledAttributes(new int[]{
+                android.R.attr.colorBackground,
+                android.R.attr.textColorPrimary,
+        });
+        defaultBackgroundColor = array.getColor(0, 0);
+        defaultTextColor = array.getColor(1, 0xFFFFFF);
+        array.recycle();
+
+        try
+        {
+          SimpleJsonWriter jsonWriter = new SimpleJsonWriter(m_extractPath+"style.json");
+          jsonWriter.beginObject();
+          try {
+              extractWindow(jsonWriter, "windowStyle");
+              jsonWriter.name("buttonStyle").value(extractTextAppearanceInformations("buttonStyle", "QPushButton", null, -1));
+              jsonWriter.name("spinnerStyle").value(extractTextAppearanceInformations("spinnerStyle", "QComboBox", null, -1));
+              extractProgressBar(jsonWriter, "progressBarStyleHorizontal", "QProgressBar");
+              extractProgressBar(jsonWriter, "progressBarStyleLarge", null);
+              extractProgressBar(jsonWriter, "progressBarStyleSmall", null);
+              extractProgressBar(jsonWriter, "progressBarStyle", null);
+              extractAbsSeekBar(jsonWriter, "seekBarStyle", "QSlider");
+              if (Build.VERSION.SDK_INT > 13) {
+                  extractSwitch(jsonWriter, "switchStyle", null);
+              }
+              extractCompoundButton(jsonWriter, "checkboxStyle", "QCheckBox");
+              jsonWriter.name("editTextStyle").value(extractTextAppearanceInformations("editTextStyle", "QLineEdit", null, -1));
+              extractCompoundButton(jsonWriter, "radioButtonStyle", "QRadioButton");
+              jsonWriter.name("textViewStyle").value(extractTextAppearanceInformations("textViewStyle", "QWidget", null, -1));
+              jsonWriter.name("scrollViewStyle").value(extractTextAppearanceInformations("scrollViewStyle", "QAbstractScrollArea", null, -1));
+              extractListView(jsonWriter, "listViewStyle", "QListView");
+              jsonWriter.name("listSeparatorTextViewStyle").value(extractTextAppearanceInformations("listSeparatorTextViewStyle", null, null, -1));
+              extractItemsStyle(jsonWriter);
+              extractCompoundButton(jsonWriter, "buttonStyleToggle", null);
+              if (Build.VERSION.SDK_INT > 10) {
+                  extractCalendar(jsonWriter, "calendarViewStyle", "QCalendarWidget");
+                  extractToolBar(jsonWriter, "actionBarStyle", "QToolBar");
+                  jsonWriter.name("actionButtonStyle").value(extractTextAppearanceInformations("actionButtonStyle", "QToolButton", null, -1));
+                  jsonWriter.name("actionBarTabTextStyle").value(extractTextAppearanceInformations("actionBarTabTextStyle", null, null, -1));
+                  jsonWriter.name("actionBarTabStyle").value(extractTextAppearanceInformations("actionBarTabStyle", null, null, -1));
+                  jsonWriter.name("actionOverflowButtonStyle").value(extractImageViewInformations("actionOverflowButtonStyle", null));
+                  extractTabBar(jsonWriter, "actionBarTabBarStyle", "QTabBar");
+              }
+          } catch (Exception e) {
+              e.printStackTrace();
+          }
+          jsonWriter.endObject();
+          jsonWriter.close();
+//          MinistroActivity.nativeChmode(m_extractPath+"style.json", 0644);
+        }
+        catch (Exception e) {
+          e.printStackTrace();
+        }
+    }
+}
diff --git a/src/android/jar/src/org/qtproject/qt5/android/QtActivityDelegate.java b/src/android/jar/src/org/qtproject/qt5/android/QtActivityDelegate.java
index 9e067f14c5..6dad8888ce 100644
--- a/src/android/jar/src/org/qtproject/qt5/android/QtActivityDelegate.java
+++ b/src/android/jar/src/org/qtproject/qt5/android/QtActivityDelegate.java
@@ -45,11 +45,11 @@ package org.qtproject.qt5.android;
 import android.app.Activity;
 import android.content.Context;
 import android.content.Intent;
+import android.content.pm.ActivityInfo;
 import android.content.pm.PackageManager;
 import android.content.pm.PackageManager.NameNotFoundException;
 import android.content.res.Configuration;
 import android.graphics.drawable.ColorDrawable;
-import android.graphics.Rect;
 import android.os.Build;
 import android.os.Bundle;
 import android.os.Handler;
@@ -75,7 +75,6 @@ import java.io.File;
 import java.io.FileWriter;
 import java.io.IOException;
 import java.lang.reflect.Method;
-import java.lang.System;
 import java.util.ArrayList;
 import java.util.HashMap;
 import java.util.Iterator;
@@ -99,6 +98,7 @@ public class QtActivityDelegate
     private static final String APPLICATION_PARAMETERS_KEY = "application.parameters";
     private static final String STATIC_INIT_CLASSES_KEY = "static.init.classes";
     private static final String NECESSITAS_API_LEVEL_KEY = "necessitas.api.level";
+    private static final String EXTRACT_STYLE_KEY = "extract.android.style";
 
     private static String m_environmentVariables = null;
     private static String m_applicationParameters = null;
@@ -109,6 +109,7 @@ public class QtActivityDelegate
     private String m_mainLib;
     private long m_metaState;
     private int m_lastChar = 0;
+    private int m_softInputMode = 0;
     private boolean m_fullScreen = false;
     private boolean m_started = false;
     private HashMap<Integer, QtSurface> m_surfaces = null;
@@ -119,7 +120,6 @@ public class QtActivityDelegate
     private boolean m_quitApp = true;
     private Process m_debuggerProcess = null; // debugger process
     private View m_dummyView = null;
-
     private boolean m_keyboardIsVisible = false;
     public boolean m_backKeyPressedSent = false;
     private long m_showHideTimeStamp = System.nanoTime();
@@ -245,10 +245,12 @@ public class QtActivityDelegate
         if (m_imm == null)
             return;
 
-        if (height > m_layout.getHeight() * 2 / 3)
-            m_activity.getWindow().setSoftInputMode(WindowManager.LayoutParams.SOFT_INPUT_STATE_UNCHANGED | WindowManager.LayoutParams.SOFT_INPUT_ADJUST_RESIZE);
-        else
+        if (m_softInputMode == 0 && height > m_layout.getHeight() * 2 / 3)
+           m_activity.getWindow().setSoftInputMode(WindowManager.LayoutParams.SOFT_INPUT_STATE_UNCHANGED | WindowManager.LayoutParams.SOFT_INPUT_ADJUST_RESIZE);
+        else if (m_softInputMode == 0)
             m_activity.getWindow().setSoftInputMode(WindowManager.LayoutParams.SOFT_INPUT_STATE_UNCHANGED | WindowManager.LayoutParams.SOFT_INPUT_ADJUST_PAN);
+        else
+            m_activity.getWindow().setSoftInputMode(m_softInputMode);
 
         int initialCapsMode = 0;
         int imeOptions = android.view.inputmethod.EditorInfo.IME_ACTION_DONE;
@@ -422,6 +424,11 @@ public class QtActivityDelegate
         if (null == m_mainLib && libraries.size() > 0)
             m_mainLib = libraries.get(libraries.size() - 1);
 
+        if (loaderParams.containsKey(EXTRACT_STYLE_KEY)) {
+            String path = loaderParams.getString(EXTRACT_STYLE_KEY);
+            new ExtractStyle(m_activity, path);
+        }
+
         try {
             m_super_dispatchKeyEvent = m_activity.getClass().getMethod("super_dispatchKeyEvent", KeyEvent.class);
             m_super_onRestoreInstanceState = m_activity.getClass().getMethod("super_onRestoreInstanceState", Bundle.class);
@@ -463,10 +470,16 @@ public class QtActivityDelegate
         else
             m_applicationParameters = "";
 
+        try {
+            m_softInputMode = m_activity.getPackageManager().getActivityInfo(m_activity.getComponentName(), 0).softInputMode;
+        } catch (Exception e) {
+            e.printStackTrace();
+        }
+
         return true;
     }
 
-    public void debugLog(String msg)
+    public static void debugLog(String msg)
     {
         Log.i(QtNative.QtTAG, "DEBUGGER: " + msg);
     }
@@ -496,6 +509,9 @@ public class QtActivityDelegate
                         ? extras.getString("gdbserver_socket")
                         : "+debug-socket";
 
+                    if (!(new File(gdbserverPath)).exists())
+                        gdbserverPath += ".so";
+
                     // start debugger
                     m_debuggerProcess = Runtime.getRuntime().exec(gdbserverPath
                                                                     + socket
@@ -531,6 +547,11 @@ public class QtActivityDelegate
                     int timeOut = 30000; // ms until we give up on ping and pong
                     int maxAttempts = timeOut / napTime;
 
+                    if (gdbserverSocket != null) {
+                        debugLog("removing gdb socket " + gdbserverSocket);
+                        new File(gdbserverSocket).delete();
+                    }
+
                     if (usePing) {
                         debugLog("removing ping file " + pingFile);
                         File ping = new File(pingFile);
@@ -605,6 +626,8 @@ public class QtActivityDelegate
                             debugLog("go to sleep");
                             Thread.sleep(napTime);
                         }
+                        debugLog("Removing pingFile " + pingFile);
+                        new File(pingFile).delete();
 
                         if (i == maxAttempts) {
                             debugLog("time out when waiting for pong file");
@@ -794,15 +817,6 @@ public class QtActivityDelegate
         if (!m_started)
             return false;
 
-        if (keyCode == KeyEvent.KEYCODE_MENU) {
-            try {
-                return (Boolean)m_super_onKeyDown.invoke(m_activity, keyCode, event);
-            } catch (Exception e) {
-                e.printStackTrace();
-                return false;
-            }
-        }
-
         m_metaState = MetaKeyKeyListener.handleKeyDown(m_metaState, keyCode, event);
         int c = event.getUnicodeChar(MetaKeyKeyListener.getMetaState(m_metaState));
         int lc = c;
@@ -837,15 +851,6 @@ public class QtActivityDelegate
         if (!m_started)
             return false;
 
-        if (keyCode == KeyEvent.KEYCODE_MENU) {
-            try {
-                return (Boolean)m_super_onKeyUp.invoke(m_activity, keyCode, event);
-            } catch (Exception e) {
-                e.printStackTrace();
-                return false;
-            }
-        }
-
         if ((keyCode == KeyEvent.KEYCODE_VOLUME_UP
             || keyCode == KeyEvent.KEYCODE_VOLUME_DOWN
             || keyCode == KeyEvent.KEYCODE_MUTE)
@@ -883,7 +888,7 @@ public class QtActivityDelegate
         return false;
     }
 
-    private boolean m_opionsMenuIsVisible = false;
+    private boolean m_optionsMenuIsVisible = false;
     public boolean onCreateOptionsMenu(Menu menu)
     {
         menu.clear();
@@ -891,7 +896,7 @@ public class QtActivityDelegate
     }
     public boolean onPrepareOptionsMenu(Menu menu)
     {
-        m_opionsMenuIsVisible = true;
+        m_optionsMenuIsVisible = true;
         boolean res = QtNative.onPrepareOptionsMenu(menu);
         setActionBarVisibility(res && menu.size() > 0);
         return res;
@@ -904,7 +909,7 @@ public class QtActivityDelegate
 
     public void onOptionsMenuClosed(Menu menu)
     {
-        m_opionsMenuIsVisible = false;
+        m_optionsMenuIsVisible = false;
         QtNative.onOptionsMenuClosed(menu);
     }
 
@@ -918,7 +923,7 @@ public class QtActivityDelegate
             }
         }
         else
-            if (m_opionsMenuIsVisible)
+            if (m_optionsMenuIsVisible)
                 m_activity.closeOptionsMenu();
     }
     private boolean m_contextMenuVisible = false;
@@ -931,6 +936,12 @@ public class QtActivityDelegate
         m_contextMenuVisible = true;
     }
 
+    public void onCreatePopupMenu(Menu menu)
+    {
+        QtNative.fillContextMenu(menu);
+        m_contextMenuVisible = true;
+    }
+
     public void onContextMenuClosed(Menu menu)
     {
         if (!m_contextMenuVisible)
@@ -941,17 +952,28 @@ public class QtActivityDelegate
 
     public boolean onContextItemSelected(MenuItem item)
     {
+        m_contextMenuVisible = false;
         return QtNative.onContextItemSelected(item.getItemId(), item.isChecked());
     }
 
-    public void openContextMenu()
+    public void openContextMenu(final int x, final int y, final int w, final int h)
     {
         m_layout.postDelayed(new Runnable() {
                 @Override
                 public void run() {
-                    m_activity.openContextMenu(m_layout);
+                    if (Build.VERSION.SDK_INT < 11 || w <= 0 || h <= 0) {
+                        m_activity.openContextMenu(m_layout);
+                    } else if (Build.VERSION.SDK_INT < 14) {
+                        m_layout.removeView(m_editText);
+                        m_layout.addView(m_editText, new QtLayout.LayoutParams(w, h, x, y));
+                        QtPopupMenu.getInstance().showMenu(m_editText);
+                    } else {
+                        m_layout.removeView(m_editText);
+                        m_layout.addView(m_editText, new QtLayout.LayoutParams(w, h, x, y));
+                        QtPopupMenu14.getInstance().showMenu(m_editText);
+                    }
                 }
-            }, 10);
+            }, 100);
     }
 
     public void closeContextMenu()
@@ -1017,8 +1039,8 @@ public class QtActivityDelegate
             view.setLayoutParams(new QtLayout.LayoutParams(w, h, x, y));
         }
 
+        view.setId(id);
         m_layout.addView(view);
-        m_layout.bringChildToFront(view);
         m_nativeViews.put(id, view);
     }
 
@@ -1049,9 +1071,11 @@ public class QtActivityDelegate
             surface.setLayoutParams( new QtLayout.LayoutParams(w, h, x, y));
         }
 
-        m_layout.addView(surface);
-        if (onTop)
-            m_layout.bringChildToFront(surface);
+        // Native views are always inserted in the end of the stack (i.e., on top).
+        // All other views are stacked based on the order they are created.
+        final int index = m_layout.getChildCount() - m_nativeViews.size() - 1;
+        m_layout.addView(surface, index < 0 ? 0 : index);
+
         m_surfaces.put(id, surface);
     }
 
@@ -1062,7 +1086,6 @@ public class QtActivityDelegate
         } else if (m_nativeViews.containsKey(id)) {
             View view = m_nativeViews.get(id);
             view.setLayoutParams(new QtLayout.LayoutParams(w, h, x, y));
-            m_layout.bringChildToFront(view);
         } else {
             Log.e(QtNative.QtTAG, "Surface " + id +" not found!");
             return;
@@ -1082,12 +1105,44 @@ public class QtActivityDelegate
             Log.e(QtNative.QtTAG, "Surface " + id +" not found!");
         }
 
+        if (view == null)
+            return;
+
         // Keep last frame in stack until it is replaced to get correct
         // shutdown transition
         if (m_surfaces.size() == 0 && m_nativeViews.size() == 0) {
             m_dummyView = view;
-        } else if (view != null) {
+        } else {
             m_layout.removeView(view);
         }
     }
+
+    public void bringChildToFront(int id)
+    {
+        View view = m_surfaces.get(id);
+        if (view != null) {
+            final int index = m_layout.getChildCount() - m_nativeViews.size() - 1;
+            m_layout.moveChild(view, index < 0 ? 0 : index);
+            return;
+        }
+
+        view = m_nativeViews.get(id);
+        if (view != null)
+            m_layout.moveChild(view, -1);
+    }
+
+    public void bringChildToBack(int id)
+    {
+        View view = m_surfaces.get(id);
+        if (view != null) {
+            m_layout.moveChild(view, 0);
+            return;
+        }
+
+        view = m_nativeViews.get(id);
+        if (view != null) {
+            final int index = m_layout.getChildCount() - m_nativeViews.size();
+            m_layout.moveChild(view, index);
+        }
+    }
 }
diff --git a/src/android/jar/src/org/qtproject/qt5/android/QtLayout.java b/src/android/jar/src/org/qtproject/qt5/android/QtLayout.java
index 058b10750f..4033866e6c 100644
--- a/src/android/jar/src/org/qtproject/qt5/android/QtLayout.java
+++ b/src/android/jar/src/org/qtproject/qt5/android/QtLayout.java
@@ -205,8 +205,17 @@ public class QtLayout extends ViewGroup
         }
     }
 
-    public void bringChildFront(int child)
+    public void moveChild(View view, int index)
     {
-        bringChildToFront(getChildAt(child));
+        if (view == null)
+            return;
+
+        if (indexOfChild(view) == -1)
+            return;
+
+        detachViewFromParent(view);
+        requestLayout();
+        invalidate();
+        attachViewToParent(view, index, view.getLayoutParams());
     }
 }
diff --git a/src/android/jar/src/org/qtproject/qt5/android/QtNative.java b/src/android/jar/src/org/qtproject/qt5/android/QtNative.java
index 0e2af9a192..51688441e0 100644
--- a/src/android/jar/src/org/qtproject/qt5/android/QtNative.java
+++ b/src/android/jar/src/org/qtproject/qt5/android/QtNative.java
@@ -440,12 +440,12 @@ public class QtNative
         return m_clipboardManager.getText().toString();
     }
 
-    private static void openContextMenu()
+    private static void openContextMenu(final int x, final int y, final int w, final int h)
     {
         runAction(new Runnable() {
             @Override
             public void run() {
-                m_activityDelegate.openContextMenu();
+                m_activityDelegate.openContextMenu(x, y, w, h);
             }
         });
     }
@@ -470,6 +470,16 @@ public class QtNative
         });
     }
 
+    private static void openOptionsMenu()
+    {
+        runAction(new Runnable() {
+            @Override
+            public void run() {
+                m_activity.openOptionsMenu();
+            }
+        });
+    }
+
     private static byte[][] getSSLCertificates()
     {
         ArrayList<byte[]> certificateList = new ArrayList<byte[]>();
@@ -527,6 +537,26 @@ public class QtNative
         });
     }
 
+    private static void bringChildToFront(final int id)
+    {
+        runAction(new Runnable() {
+            @Override
+            public void run() {
+                m_activityDelegate.bringChildToFront(id);
+            }
+        });
+    }
+
+    private static void bringChildToBack(final int id)
+    {
+        runAction(new Runnable() {
+            @Override
+            public void run() {
+                m_activityDelegate.bringChildToBack(id);
+            }
+        });
+    }
+
     private static void destroySurface(final int id)
     {
         runAction(new Runnable() {
@@ -581,6 +611,7 @@ public class QtNative
     public static native void onOptionsMenuClosed(Menu menu);
 
     public static native void onCreateContextMenu(ContextMenu menu);
+    public static native void fillContextMenu(Menu menu);
     public static native boolean onContextItemSelected(int itemId, boolean checked);
     public static native void onContextMenuClosed(Menu menu);
     // menu methods
diff --git a/src/plugins/platforms/android/qandroidplatformrasterwindow.h b/src/android/jar/src/org/qtproject/qt5/android/QtPopupMenu.java
index 50c0d497af..68143d89bf 100644
--- a/src/plugins/platforms/android/qandroidplatformrasterwindow.h
+++ b/src/android/jar/src/org/qtproject/qt5/android/QtPopupMenu.java
@@ -1,10 +1,9 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
-** This file is part of the plugins of the Qt Toolkit.
+** This file is part of the Android port of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:LGPL$
 ** Commercial License Usage
@@ -40,31 +39,36 @@
 **
 ****************************************************************************/
 
-#ifndef QANDROIDPLATFORMRASTERWINDOW_H
-#define QANDROIDPLATFORMRASTERWINDOW_H
+package org.qtproject.qt5.android;
 
-#include "qandroidplatformwindow.h"
-QT_BEGIN_NAMESPACE
+import android.view.MenuItem;
+import android.view.View;
+import android.widget.PopupMenu;
 
-class QAndroidPlatformBackingStore;
-class QAndroidPlatformRasterWindow : public QObject, public QAndroidPlatformWindow
-{
-    Q_OBJECT
-public:
-    QAndroidPlatformRasterWindow(QWindow *window);
+public class QtPopupMenu {
+    private QtPopupMenu() { }
 
-    void setBackingStore(QAndroidPlatformBackingStore *store) { m_backingStore = store; }
-    QAndroidPlatformBackingStore *backingStore() const { return m_backingStore; }
-    void repaint(const QRegion&region);
+    private static class QtPopupMenuHolder {
+        private static final QtPopupMenu INSTANCE = new QtPopupMenu();
+    }
 
-public slots:
-    void setGeometry(const QRect &rect);
+    public static QtPopupMenu getInstance() {
+        return QtPopupMenuHolder.INSTANCE;
+    }
 
-private:
-    QAndroidPlatformBackingStore *m_backingStore = nullptr;
-    QRect m_oldGeometry;
-
-};
-
-QT_END_NAMESPACE
-#endif // QANDROIDPLATFORMRASTERWINDOW_H
+    public void showMenu(View anchor)
+    {
+        PopupMenu popup = new PopupMenu(QtNative.activity(), anchor);
+        QtNative.activityDelegate().onCreatePopupMenu(popup.getMenu());
+        popup.setOnMenuItemClickListener(new PopupMenu.OnMenuItemClickListener() {
+            @Override
+            public boolean onMenuItemClick(MenuItem menuItem) {
+                boolean res = QtNative.onContextItemSelected(menuItem.getItemId(), menuItem.isChecked());
+                if (res)
+                    QtNative.activityDelegate().onContextMenuClosed(null);
+                return res;
+            }
+        });
+        popup.show();
+    }
+}
diff --git a/src/plugins/platforms/android/qandroidplatformrasterwindow.cpp b/src/android/jar/src/org/qtproject/qt5/android/QtPopupMenu14.java
index 3fb236793b..daa30ee415 100644
--- a/src/plugins/platforms/android/qandroidplatformrasterwindow.cpp
+++ b/src/android/jar/src/org/qtproject/qt5/android/QtPopupMenu14.java
@@ -1,10 +1,9 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
-** This file is part of the plugins of the Qt Toolkit.
+** This file is part of the Android port of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:LGPL$
 ** Commercial License Usage
@@ -40,44 +39,39 @@
 **
 ****************************************************************************/
 
-#include "qandroidplatformrasterwindow.h"
+package org.qtproject.qt5.android;
 
-#include "qandroidplatformscreen.h"
+import android.view.MenuItem;
+import android.view.View;
+import android.widget.PopupMenu;
 
-QT_BEGIN_NAMESPACE
+public class QtPopupMenu14 {
+    private QtPopupMenu14() { }
 
-QAndroidPlatformRasterWindow::QAndroidPlatformRasterWindow(QWindow *window)
-    :QAndroidPlatformWindow(window)
-{
+    private static class QtPopupMenu14Holder {
+        private static final QtPopupMenu14 INSTANCE = new QtPopupMenu14();
+    }
 
-}
-
-void QAndroidPlatformRasterWindow::repaint(const QRegion &region)
-{
-    if (QAndroidPlatformWindow::parent())
-        return;
-
-    QRect currentGeometry = geometry();
+    public static QtPopupMenu14 getInstance() {
+        return QtPopupMenu14Holder.INSTANCE;
+    }
 
-    QRect dirtyClient = region.boundingRect();
-    QRect dirtyRegion(currentGeometry.left() + dirtyClient.left(),
-                      currentGeometry.top() + dirtyClient.top(),
-                      dirtyClient.width(),
-                      dirtyClient.height());
-    QRect mOldGeometryLocal = m_oldGeometry;
-    m_oldGeometry = currentGeometry;
-    // If this is a move, redraw the previous location
-    if (mOldGeometryLocal != currentGeometry)
-        platformScreen()->setDirty(mOldGeometryLocal);
-    platformScreen()->setDirty(dirtyRegion);
+    public void showMenu(View anchor)
+    {
+        PopupMenu popup = new PopupMenu(QtNative.activity(), anchor);
+        QtNative.activityDelegate().onCreatePopupMenu(popup.getMenu());
+        popup.setOnMenuItemClickListener(new PopupMenu.OnMenuItemClickListener() {
+            @Override
+            public boolean onMenuItemClick(MenuItem menuItem) {
+                return QtNative.activityDelegate().onContextItemSelected(menuItem);
+            }
+        });
+        popup.setOnDismissListener(new PopupMenu.OnDismissListener() {
+            @Override
+            public void onDismiss(PopupMenu popupMenu) {
+                QtNative.activityDelegate().onContextMenuClosed(popupMenu.getMenu());
+            }
+        });
+        popup.show();
+    }
 }
-
-void QAndroidPlatformRasterWindow::setGeometry(const QRect &rect)
-{
-    m_oldGeometry = geometry();
-    QAndroidPlatformWindow::setGeometry(rect);
-    if (rect.topLeft() != m_oldGeometry.topLeft())
-        repaint(QRegion(rect));
-}
-
-QT_END_NAMESPACE
diff --git a/src/android/java/java.pro b/src/android/java/java.pro
index cff2d55d86..9d37eb1026 100644
--- a/src/android/java/java.pro
+++ b/src/android/java/java.pro
@@ -1,8 +1,6 @@
 CONFIG -= qt android_install
 
 javaresources.files = \
-    $$PWD/AndroidManifest.xml \
-    $$PWD/version.xml \
     $$PWD/res \
     $$PWD/src
 
@@ -18,8 +16,6 @@ INSTALLS += javaresources
     OUT_PATH = $$shell_path($$OUT_PWD)
 
     QMAKE_POST_LINK += \
-        $${QMAKE_COPY} $$shell_path($$PWD/AndroidManifest.xml) $$OUT_PATH $$RETURN \
-        $${QMAKE_COPY} $$shell_path($$PWD/version.xml) $$OUT_PATH $$RETURN \
         $${QMAKE_COPY_DIR} $$shell_path($$PWD/res) $$OUT_PATH $$RETURN \
         $${QMAKE_COPY_DIR} $$shell_path($$PWD/src) $$OUT_PATH
 }
diff --git a/src/android/java/res/values/strings.xml b/src/android/java/res/values/strings.xml
index 300f0673a4..fcc3eb097b 100644
--- a/src/android/java/res/values/strings.xml
+++ b/src/android/java/res/values/strings.xml
@@ -1,7 +1,6 @@
 <?xml version='1.0' encoding='utf-8'?>
 <resources>
-    <string name="app_name"><!-- %%INSERT_APP_NAME%% --></string>
-
+    <!-- %%INSERT_STRINGS -->
     <string name="ministro_not_found_msg">Can\'t find Ministro service.\nThe application can\'t start.</string>
     <string name="ministro_needed_msg">This application requires Ministro service. Would you like to install it?</string>
     <string name="fatal_error_msg">Your application encountered a fatal error and cannot continue.</string>
diff --git a/src/android/java/src/org/qtproject/qt5/android/bindings/QtActivity.java b/src/android/java/src/org/qtproject/qt5/android/bindings/QtActivity.java
index 45be15bc01..e526c0a210 100644
--- a/src/android/java/src/org/qtproject/qt5/android/bindings/QtActivity.java
+++ b/src/android/java/src/org/qtproject/qt5/android/bindings/QtActivity.java
@@ -117,6 +117,7 @@ public class QtActivity extends Activity
     private static final String MAIN_LIBRARY_KEY = "main.library";
     private static final String STATIC_INIT_CLASSES_KEY = "static.init.classes";
     private static final String NECESSITAS_API_LEVEL_KEY = "necessitas.api.level";
+    private static final String EXTRACT_STYLE_KEY = "extract.android.style";
 
     /// Ministro server parameter keys
     private static final String REQUIRED_MODULES_KEY = "required.modules";
@@ -178,6 +179,7 @@ public class QtActivity extends Activity
                                                         // * unstable - unstable repository, DO NOT use this repository in production,
                                                         // this repository is used to push Qt snapshots.
     private String[] m_qtLibs = null; // required qt libs
+    private int m_displayDensity = -1;
 
     public QtActivity()
     {
@@ -630,6 +632,15 @@ public class QtActivity extends Activity
                                                 m_activityInfo.metaData.getString("android.app.static_init_classes").split(":"));
                 }
                 loaderParams.putStringArrayList(NATIVE_LIBRARIES_KEY, libraryList);
+
+
+                String themePath = getApplicationInfo().dataDir + "/qt-reserved-files/android-style/";
+                String stylePath = themePath + m_displayDensity + "/";
+                if (!(new File(stylePath)).exists())
+                    loaderParams.putString(EXTRACT_STYLE_KEY, stylePath);
+                ENVIRONMENT_VARIABLES += "\tMINISTRO_ANDROID_STYLE_PATH=" + stylePath
+                                       + "\tQT_ANDROID_THEMES_ROOT_PATH=" + themePath;
+
                 loaderParams.putString(ENVIRONMENT_VARIABLES_KEY, ENVIRONMENT_VARIABLES
                                                                   + "\tQML2_IMPORT_PATH=" + pluginsPrefix + "/qml"
                                                                   + "\tQML_IMPORT_PATH=" + pluginsPrefix + "/imports"
@@ -868,8 +879,10 @@ public class QtActivity extends Activity
             return;
         }
 
+        m_displayDensity = getResources().getDisplayMetrics().densityDpi;
+
         ENVIRONMENT_VARIABLES += "\tQT_ANDROID_THEME=" + QT_ANDROID_DEFAULT_THEME
-                              + "/\tQT_ANDROID_THEME_DISPLAY_DPI=" + getResources().getDisplayMetrics().densityDpi + "\t";
+                              + "/\tQT_ANDROID_THEME_DISPLAY_DPI=" + m_displayDensity + "\t";
 
         if (null == getLastNonConfigurationInstance()) {
             // if splash screen is defined, then show it
@@ -877,6 +890,13 @@ public class QtActivity extends Activity
                 getWindow().setBackgroundDrawableResource(m_activityInfo.metaData.getInt("android.app.splash_screen_drawable"));
             else
                 getWindow().setBackgroundDrawable(new ColorDrawable(0xff000000));
+
+            if (m_activityInfo.metaData.containsKey("android.app.background_running")
+                && m_activityInfo.metaData.getBoolean("android.app.background_running")) {
+                ENVIRONMENT_VARIABLES += "QT_BLOCK_EVENT_LOOPS_WHEN_SUSPENDED=0\t";
+            } else {
+                ENVIRONMENT_VARIABLES += "QT_BLOCK_EVENT_LOOPS_WHEN_SUSPENDED=1\t";
+            }
             startApp(true);
         }
     }
diff --git a/src/android/java/version.xml b/src/android/java/version.xml
deleted file mode 100644
index e05bba7588..0000000000
--- a/src/android/java/version.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<version value="5.3">
-    <ignore>
-        <file>AndroidManifest.xml</file>
-        <file>libs.xml</file>
-        <file>logo.png</file>
-        <file>icon.png</file>
-    </ignore>
-</version>
diff --git a/src/android/java/AndroidManifest.xml b/src/android/templates/AndroidManifest.xml
index 8e551ba7ac..60c612976f 100644
--- a/src/android/java/AndroidManifest.xml
+++ b/src/android/templates/AndroidManifest.xml
@@ -1,9 +1,9 @@
 <?xml version='1.0' encoding='utf-8'?>
 <manifest package="org.qtproject.example" xmlns:android="http://schemas.android.com/apk/res/android" android:versionName="1.0" android:versionCode="1" android:installLocation="auto">
-    <application android:hardwareAccelerated="true" android:name="org.qtproject.qt5.android.bindings.QtApplication" android:label="@string/app_name">
+    <application android:hardwareAccelerated="true" android:name="org.qtproject.qt5.android.bindings.QtApplication" android:label="-- %%INSERT_APP_NAME%% --">
         <activity android:configChanges="orientation|uiMode|screenLayout|screenSize|smallestScreenSize|locale|fontScale|keyboard|keyboardHidden|navigation"
                   android:name="org.qtproject.qt5.android.bindings.QtActivity"
-                  android:label="@string/app_name"
+                  android:label="-- %%INSERT_APP_NAME%% --"
                   android:screenOrientation="unspecified"
                   android:launchMode="singleTop">
             <intent-filter>
@@ -36,6 +36,14 @@
             <meta-data android:name="android.app.splash_screen_drawable" android:resource="@drawable/logo"/>
             -->
             <!-- Splash screen -->
+
+            <!-- Background running -->
+            <!-- Warning: changing this value to true may cause unexpected crashes if the
+                          application still try to draw after
+                          "applicationStateChanged(Qt::ApplicationSuspended)"
+                          signal is sent! -->
+            <meta-data android:name="android.app.background_running" android:value="false"/>
+            <!-- Background running -->
         </activity>
     </application>
     <uses-sdk android:minSdkVersion="9" android:targetSdkVersion="14"/>
diff --git a/src/android/templates/build.gradle b/src/android/templates/build.gradle
new file mode 100644
index 0000000000..d1ff362269
--- /dev/null
+++ b/src/android/templates/build.gradle
@@ -0,0 +1,51 @@
+buildscript {
+    repositories {
+        mavenCentral()
+    }
+
+    dependencies {
+        classpath 'com.android.tools.build:gradle:0.12.1'
+    }
+}
+
+apply plugin: 'android'
+
+dependencies {
+    compile fileTree(dir: 'libs', include: ['*.jar'])
+}
+
+android {
+    /*******************************************************
+     * The following variables:
+     * - androidBuildToolsVersion,
+     * - androidCompileSdkVersion
+     * - qt5AndroidDir - holds the path to qt android files
+     *                   needed to build any Qt application
+     *                   on Android.
+     *
+     * are defined in gradle.properties file. This file is
+     * updated by QtCreator and androiddeployqt tools.
+     * Changing them manually might break the compilation!
+     *******************************************************/
+
+    compileSdkVersion androidCompileSdkVersion.toInteger()
+
+    buildToolsVersion androidBuildToolsVersion
+
+    sourceSets {
+        main {
+            manifest.srcFile 'AndroidManifest.xml'
+            java.srcDirs = [qt5AndroidDir + '/src', 'src', 'java']
+            aidl.srcDirs = [qt5AndroidDir + '/src', 'src', 'aidl']
+            res.srcDirs = [qt5AndroidDir + '/res', 'res']
+            resources.srcDirs = ['src']
+            renderscript.srcDirs = ['src']
+            assets.srcDirs = ['assets']
+            jniLibs.srcDirs = ['libs']
+       }
+    }
+
+    lintOptions {
+        abortOnError false
+    }
+}
diff --git a/src/android/java/res/values/libs.xml b/src/android/templates/res/values/libs.xml
index 664ab0abec..664ab0abec 100644
--- a/src/android/java/res/values/libs.xml
+++ b/src/android/templates/res/values/libs.xml
diff --git a/src/android/templates/templates.pro b/src/android/templates/templates.pro
new file mode 100644
index 0000000000..684a556c5b
--- /dev/null
+++ b/src/android/templates/templates.pro
@@ -0,0 +1,21 @@
+CONFIG -= qt android_install
+
+templates.files = \
+    $$PWD/AndroidManifest.xml \
+    $$PWD/res
+
+templates.path = $$[QT_INSTALL_PREFIX]/src/android/templates
+
+INSTALLS += templates
+
+!prefix_build:!equals(OUT_PWD, $$PWD) {
+    RETURN = $$escape_expand(\\n\\t)
+    equals(QMAKE_HOST.os, Windows) {
+        RETURN = $$escape_expand(\\r\\n\\t)
+    }
+    OUT_PATH = $$shell_path($$OUT_PWD)
+
+    QMAKE_POST_LINK += \
+        $${QMAKE_COPY} $$shell_path($$PWD/AndroidManifest.xml) $$OUT_PATH $$RETURN \
+        $${QMAKE_COPY_DIR} $$shell_path($$PWD/res) $$OUT_PATH
+}
diff --git a/src/angle/angle.pro b/src/angle/angle.pro
index 83510698d3..c454fee8f9 100644
--- a/src/angle/angle.pro
+++ b/src/angle/angle.pro
@@ -6,5 +6,5 @@ SUBDIRS += src
 #  2) If we made a 'QtANGLE' module, the include directory would be flattened which won't work since
 #     we need to support "#include <GLES2/gl2.h>"
 CONFIG += minimal_syncqt
-QMAKE_SYNCQT_OPTIONS = -module QtANGLE/KHR -module QtANGLE/EGL -module QtANGLE/GLES2 -version none
+QMAKE_SYNCQT_OPTIONS = -module QtANGLE/KHR -module QtANGLE/EGL -module QtANGLE/GLES2 -module QtANGLE/GLES3 -version none
 load(qt_module_headers)
diff --git a/src/angle/patches/0000-General-fixes-for-ANGLE-2.1.patch b/src/angle/patches/0000-General-fixes-for-ANGLE-2.1.patch
new file mode 100644
index 0000000000..d5e3697c4f
--- /dev/null
+++ b/src/angle/patches/0000-General-fixes-for-ANGLE-2.1.patch
@@ -0,0 +1,1519 @@
+From f409f6837ce80d722eb6d2ff178b61b713d3e8c7 Mon Sep 17 00:00:00 2001
+From: Andrew Knight <andrew.knight@digia.com>
+Date: Thu, 25 Sep 2014 13:23:19 +0300
+Subject: [PATCH] General fixes for ANGLE 2.1
+
+- Fix commit.h include (use hard-coded version)
+- Fix undefined intptr_t in egl.h and eglext.h
+- Fix export mismatch in libEGL.cpp and libGLESv2.cpp
+- Remove D3D9 d3dcompiler.h include requirement in the translator
+- Normalize all precompiled shader names and includes
+- Remove third-party event tracing; it was hardly used in ANGLE
+  and not enabled in Qt builds anyway.
+
+Change-Id: I22254aed62e89a26756ca0784bae95909189c0f9
+---
+ src/3rdparty/angle/include/EGL/egl.h               |   2 +-
+ src/3rdparty/angle/include/EGL/eglext.h            |   2 +-
+ src/3rdparty/angle/src/common/event_tracer.cpp     |  49 --
+ src/3rdparty/angle/src/common/event_tracer.h       |  43 --
+ src/3rdparty/angle/src/common/version.h            |   2 +-
+ src/3rdparty/angle/src/libEGL/libEGL.cpp           |   3 +
+ src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp     |   5 +
+ src/3rdparty/angle/src/libGLESv2/libGLESv2.def     |   3 -
+ .../angle/src/libGLESv2/libGLESv2_mingw32.def      |   3 -
+ src/3rdparty/angle/src/libGLESv2/libGLESv2d.def    |   3 -
+ .../angle/src/libGLESv2/libGLESv2d_mingw32.def     |   3 -
+ .../angle/src/libGLESv2/renderer/Renderer.cpp      |   1 -
+ .../angle/src/libGLESv2/renderer/SwapChain.h       |   4 -
+ .../src/libGLESv2/renderer/d3d/HLSLCompiler.cpp    |   6 +-
+ .../src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp    |  66 +-
+ .../src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp   |  12 +-
+ .../renderer/d3d/d3d11/PixelTransfer11.cpp         |  10 +-
+ .../libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp   |   4 +-
+ .../renderer/d3d/d3d11/shaders/Clear11.hlsl        |   4 +
+ .../src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp      |  20 +-
+ .../src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp  |  12 -
+ .../libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps    |   6 +-
+ .../libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs    |   4 +-
+ .../src/third_party/trace_event/trace_event.h      | 826 ---------------------
+ src/angle/src/common/common.pri                    |   2 -
+ 25 files changed, 80 insertions(+), 1015 deletions(-)
+ delete mode 100644 src/3rdparty/angle/src/common/event_tracer.cpp
+ delete mode 100644 src/3rdparty/angle/src/common/event_tracer.h
+ delete mode 100644 src/3rdparty/angle/src/third_party/trace_event/trace_event.h
+
+diff --git a/src/3rdparty/angle/include/EGL/egl.h b/src/3rdparty/angle/include/EGL/egl.h
+index 12590a0..ab2f0cd 100644
+--- a/src/3rdparty/angle/include/EGL/egl.h
++++ b/src/3rdparty/angle/include/EGL/egl.h
+@@ -238,7 +238,7 @@ EGLAPI EGLContext EGLAPIENTRY eglGetCurrentContext (void);
+ #ifndef EGL_VERSION_1_5
+ #define EGL_VERSION_1_5 1
+ typedef void *EGLSync;
+-typedef intptr_t EGLAttrib;
++typedef khronos_intptr_t EGLAttrib;
+ typedef khronos_utime_nanoseconds_t EGLTime;
+ #define EGL_CONTEXT_MAJOR_VERSION         0x3098
+ #define EGL_CONTEXT_MINOR_VERSION         0x30FB
+diff --git a/src/3rdparty/angle/include/EGL/eglext.h b/src/3rdparty/angle/include/EGL/eglext.h
+index 9e29605..989359b 100644
+--- a/src/3rdparty/angle/include/EGL/eglext.h
++++ b/src/3rdparty/angle/include/EGL/eglext.h
+@@ -59,7 +59,7 @@ extern "C" {
+ #ifndef EGL_KHR_cl_event2
+ #define EGL_KHR_cl_event2 1
+ typedef void *EGLSyncKHR;
+-typedef intptr_t EGLAttribKHR;
++typedef khronos_intptr_t EGLAttribKHR;
+ typedef EGLSyncKHR (EGLAPIENTRYP PFNEGLCREATESYNC64KHRPROC) (EGLDisplay dpy, EGLenum type, const EGLAttribKHR *attrib_list);
+ #ifdef EGL_EGLEXT_PROTOTYPES
+ EGLAPI EGLSyncKHR EGLAPIENTRY eglCreateSync64KHR (EGLDisplay dpy, EGLenum type, const EGLAttribKHR *attrib_list);
+diff --git a/src/3rdparty/angle/src/common/event_tracer.cpp b/src/3rdparty/angle/src/common/event_tracer.cpp
+deleted file mode 100644
+index 353c69d..0000000
+--- a/src/3rdparty/angle/src/common/event_tracer.cpp
++++ /dev/null
+@@ -1,49 +0,0 @@
+-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+-// Use of this source code is governed by a BSD-style license that can be
+-// found in the LICENSE file.
+-
+-#include "common/event_tracer.h"
+-
+-namespace gl
+-{
+-
+-GetCategoryEnabledFlagFunc g_getCategoryEnabledFlag;
+-AddTraceEventFunc g_addTraceEvent;
+-
+-}  // namespace gl
+-
+-extern "C" {
+-
+-void TRACE_ENTRY SetTraceFunctionPointers(GetCategoryEnabledFlagFunc getCategoryEnabledFlag,
+-                                          AddTraceEventFunc addTraceEvent)
+-{
+-    gl::g_getCategoryEnabledFlag = getCategoryEnabledFlag;
+-    gl::g_addTraceEvent = addTraceEvent;
+-}
+-
+-}  // extern "C"
+-
+-namespace gl
+-{
+-
+-const unsigned char* TraceGetTraceCategoryEnabledFlag(const char* name)
+-{
+-    if (g_getCategoryEnabledFlag)
+-    {
+-        return g_getCategoryEnabledFlag(name);
+-    }
+-    static unsigned char disabled = 0;
+-    return &disabled;
+-}
+-
+-void TraceAddTraceEvent(char phase, const unsigned char* categoryGroupEnabled, const char* name, unsigned long long id,
+-                        int numArgs, const char** argNames, const unsigned char* argTypes,
+-                        const unsigned long long* argValues, unsigned char flags)
+-{
+-    if (g_addTraceEvent)
+-    {
+-        g_addTraceEvent(phase, categoryGroupEnabled, name, id, numArgs, argNames, argTypes, argValues, flags);
+-    }
+-}
+-
+-}  // namespace gl
+diff --git a/src/3rdparty/angle/src/common/event_tracer.h b/src/3rdparty/angle/src/common/event_tracer.h
+deleted file mode 100644
+index fa97435..0000000
+--- a/src/3rdparty/angle/src/common/event_tracer.h
++++ /dev/null
+@@ -1,43 +0,0 @@
+-// Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
+-// Use of this source code is governed by a BSD-style license that can be
+-// found in the LICENSE file.
+-
+-#ifndef COMMON_EVENT_TRACER_H_
+-#define COMMON_EVENT_TRACER_H_
+-
+-#include "common/platform.h"
+-
+-#if !defined(TRACE_ENTRY)
+-#   ifdef ANGLE_PLATFORM_WINDOWS
+-#       define TRACE_ENTRY __stdcall
+-#   else
+-#       define TRACE_ENTRY
+-#   endif // ANGLE_PLATFORM_WINDOWS
+-#endif //TRACE_ENTRY
+-
+-extern "C" {
+-
+-typedef const unsigned char* (*GetCategoryEnabledFlagFunc)(const char* name);
+-typedef void (*AddTraceEventFunc)(char phase, const unsigned char* categoryGroupEnabled, const char* name,
+-                                  unsigned long long id, int numArgs, const char** argNames,
+-                                  const unsigned char* argTypes, const unsigned long long* argValues,
+-                                  unsigned char flags);
+-
+-// extern "C" so that it has a reasonable name for GetProcAddress.
+-void TRACE_ENTRY SetTraceFunctionPointers(GetCategoryEnabledFlagFunc get_category_enabled_flag,
+-                                          AddTraceEventFunc add_trace_event_func);
+-
+-}
+-
+-namespace gl
+-{
+-
+-const unsigned char* TraceGetTraceCategoryEnabledFlag(const char* name);
+-
+-void TraceAddTraceEvent(char phase, const unsigned char* categoryGroupEnabled, const char* name, unsigned long long id,
+-                        int numArgs, const char** argNames, const unsigned char* argTypes,
+-                        const unsigned long long* argValues, unsigned char flags);
+-
+-}
+-
+-#endif  // COMMON_EVENT_TRACER_H_
+diff --git a/src/3rdparty/angle/src/common/version.h b/src/3rdparty/angle/src/common/version.h
+index d9148d1..f01e024 100644
+--- a/src/3rdparty/angle/src/common/version.h
++++ b/src/3rdparty/angle/src/common/version.h
+@@ -1,4 +1,4 @@
+-#include "id/commit.h"
++#include "../commit.h"
+ 
+ #define ANGLE_MAJOR_VERSION 2
+ #define ANGLE_MINOR_VERSION 1
+diff --git a/src/3rdparty/angle/src/libEGL/libEGL.cpp b/src/3rdparty/angle/src/libEGL/libEGL.cpp
+index f9a4780..7ce2b93 100644
+--- a/src/3rdparty/angle/src/libEGL/libEGL.cpp
++++ b/src/3rdparty/angle/src/libEGL/libEGL.cpp
+@@ -6,6 +6,9 @@
+ 
+ // libEGL.cpp: Implements the exported EGL functions.
+ 
++#undef EGLAPI
++#define EGLAPI
++
+ #include <exception>
+ 
+ #include "common/debug.h"
+diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp b/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
+index 198c0ee..07f5d47 100644
+--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
+@@ -6,6 +6,10 @@
+ 
+ // libGLESv2.cpp: Implements the exported OpenGL ES 2.0 functions.
+ 
++#undef GL_APICALL
++#define GL_APICALL
++#define GL_GLEXT_PROTOTYPES
++
+ #include "common/version.h"
+ #include "common/utilities.h"
+ 
+@@ -30,6 +34,7 @@
+ #include "libGLESv2/validationES3.h"
+ #include "libGLESv2/queryconversions.h"
+ 
++
+ extern "C"
+ {
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2.def
+index 88dceb3..33557eb 100644
+--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2.def
++++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2.def
+@@ -294,6 +294,3 @@ EXPORTS
+     glBindTexImage                  @158 NONAME
+     glCreateRenderer                @177 NONAME
+     glDestroyRenderer               @178 NONAME
+-
+-    ; Setting up TRACE macro callbacks
+-    SetTraceFunctionPointers        @284
+diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def
+index d6272c4d..18ffcf6 100644
+--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def
++++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2_mingw32.def
+@@ -294,6 +294,3 @@ EXPORTS
+     glBindTexImage@4                         @158 NONAME
+     glCreateRenderer                         @177 NONAME
+     glDestroyRenderer                        @178 NONAME
+-
+-    ; Setting up TRACE macro callbacks
+-    SetTraceFunctionPointers@8               @284
+diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def
+index d301aa0..120371e 100644
+--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def
++++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2d.def
+@@ -294,6 +294,3 @@ EXPORTS
+     glBindTexImage                  @158 NONAME
+     glCreateRenderer                @177 NONAME
+     glDestroyRenderer               @178 NONAME
+-
+-    ; Setting up TRACE macro callbacks
+-    SetTraceFunctionPointers        @284
+diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def b/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def
+index a82d629..8c1306a 100644
+--- a/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def
++++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2d_mingw32.def
+@@ -294,6 +294,3 @@ EXPORTS
+     glBindTexImage@4                         @158 NONAME
+     glCreateRenderer                         @177 NONAME
+     glDestroyRenderer                        @178 NONAME
+-
+-    ; Setting up TRACE macro callbacks
+-    SetTraceFunctionPointers@8               @284
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
+index df43012..910d028 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
+@@ -10,7 +10,6 @@
+ #include "libGLESv2/Program.h"
+ #include "libGLESv2/renderer/Renderer.h"
+ #include "common/utilities.h"
+-#include "third_party/trace_event/trace_event.h"
+ #include "libGLESv2/Shader.h"
+ 
+ #if defined (ANGLE_ENABLE_D3D9)
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h b/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
+index c53b2af..12be9b3 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
+@@ -16,10 +16,6 @@
+ #include <GLES2/gl2.h>
+ #include <EGL/egl.h>
+ 
+-#if !defined(ANGLE_FORCE_VSYNC_OFF)
+-#define ANGLE_FORCE_VSYNC_OFF 0
+-#endif
+-
+ namespace rx
+ {
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+index df2e46c..acbd852 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+@@ -10,8 +10,6 @@
+ 
+ #include "common/utilities.h"
+ 
+-#include "third_party/trace_event/trace_event.h"
+-
+ namespace rx
+ {
+ 
+@@ -28,7 +26,11 @@ HLSLCompiler::~HLSLCompiler()
+ 
+ bool HLSLCompiler::initialize()
+ {
++<<<<<<< HEAD
+     TRACE_EVENT0("gpu", "initializeCompiler");
++=======
++#if !defined(ANGLE_PLATFORM_WINRT)
++>>>>>>> 429814a... ANGLE: remove event tracing
+ #if defined(ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES)
+     // Find a D3DCompiler module that had already been loaded based on a predefined list of versions.
+     static const char *d3dCompilerNames[] = ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES;
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
+index 3bdb9e7..72820a4 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
+@@ -13,39 +13,39 @@
+ #include "libGLESv2/main.h"
+ #include "libGLESv2/formatutils.h"
+ 
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough2d11vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughdepth2d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlum2d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlumalpha2d11ps.h"
+-
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough3d11vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough3d11gs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3dui11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3di11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlum3d11ps.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlumalpha3d11ps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough2dvs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughdepth2dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb2dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg2dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr2dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlum2dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlumalpha2dps.h"
++
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough3dvs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough3dgs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba3dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgb3dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrg3dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3duips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughr3dips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlum3dps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughlumalpha3dps.h"
+ 
+ #include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlef2dps.h"
+ #include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/swizzlei2dps.h"
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
+index c60b7a6..5caa427 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
+@@ -15,14 +15,14 @@
+ #include "libGLESv2/FramebufferAttachment.h"
+ 
+ // Precompiled shaders
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearfloat11vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearfloat11ps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearfloatvs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearfloatps.h"
+ 
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearuint11vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearuint11ps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearuintvs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearuintps.h"
+ 
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearsint11vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearsint11ps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearsintvs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/clearsintps.h"
+ 
+ namespace rx
+ {
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
+index f54bacc..edaafec 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
+@@ -22,11 +22,11 @@
+ #include "libGLESv2/Context.h"
+ 
+ // Precompiled shaders
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture11_vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture11_gs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture11_ps_4f.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture11_ps_4i.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture11_ps_4ui.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexturevs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexturegs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture_4fps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture_4ips.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/buffertotexture_4uips.h"
+ 
+ namespace rx
+ {
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
+index 5ec132e..50dae4e 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
+@@ -12,8 +12,8 @@
+ #include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
+ 
+ // Precompiled shaders
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough2d11vs.h"
+-#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2d11ps.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthrough2dvs.h"
++#include "libGLESv2/renderer/d3d/d3d11/shaders/compiled/passthroughrgba2dps.h"
+ 
+ namespace rx
+ {
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl
+index 6deef2b..b4cf380 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/shaders/Clear11.hlsl
+@@ -13,10 +13,12 @@ struct PS_OutputFloat
+     float4 color1 : SV_TARGET1;
+     float4 color2 : SV_TARGET2;
+     float4 color3 : SV_TARGET3;
++#if SM4
+     float4 color4 : SV_TARGET4;
+     float4 color5 : SV_TARGET5;
+     float4 color6 : SV_TARGET6;
+     float4 color7 : SV_TARGET7;
++#endif
+ };
+ 
+ PS_OutputFloat PS_ClearFloat(in float4 inPosition : SV_POSITION, in float4 inColor : COLOR)
+@@ -26,10 +28,12 @@ PS_OutputFloat PS_ClearFloat(in float4 inPosition : SV_POSITION, in float4 inCol
+     outColor.color1 = inColor;
+     outColor.color2 = inColor;
+     outColor.color3 = inColor;
++#if SM4
+     outColor.color4 = inColor;
+     outColor.color5 = inColor;
+     outColor.color6 = inColor;
+     outColor.color7 = inColor;
++#endif
+     return outColor;
+ }
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp
+index 80503d5..f061a32 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp
+@@ -27,20 +27,20 @@ namespace
+ 
+ const BYTE* const g_shaderCode[] =
+ {
+-    g_vs20_standardvs,
+-    g_vs20_flipyvs,
+-    g_ps20_passthroughps,
+-    g_ps20_luminanceps,
+-    g_ps20_componentmaskps
++    g_vs20_VS_standard,
++    g_vs20_VS_flipy,
++    g_ps20_PS_passthrough,
++    g_ps20_PS_luminance,
++    g_ps20_PS_componentmask
+ };
+ 
+ const size_t g_shaderSize[] =
+ {
+-    sizeof(g_vs20_standardvs),
+-    sizeof(g_vs20_flipyvs),
+-    sizeof(g_ps20_passthroughps),
+-    sizeof(g_ps20_luminanceps),
+-    sizeof(g_ps20_componentmaskps)
++    sizeof(g_vs20_VS_standard),
++    sizeof(g_vs20_VS_flipy),
++    sizeof(g_ps20_PS_passthrough),
++    sizeof(g_ps20_PS_luminance),
++    sizeof(g_ps20_PS_componentmask)
+ };
+ }
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
+index 73c1abc..e8564bd 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
+@@ -39,8 +39,6 @@
+ 
+ #include "common/utilities.h"
+ 
+-#include "third_party/trace_event/trace_event.h"
+-
+ #include <sstream>
+ 
+ // Can also be enabled by defining FORCE_REF_RAST in the project's predefined macros
+@@ -190,7 +188,6 @@ EGLint Renderer9::initialize()
+         return EGL_NOT_INITIALIZED;
+     }
+ 
+-    TRACE_EVENT0("gpu", "GetModuleHandle_d3d9");
+     mD3d9Module = GetModuleHandle(TEXT("d3d9.dll"));
+ 
+     if (mD3d9Module == NULL)
+@@ -207,14 +204,12 @@ EGLint Renderer9::initialize()
+     // desktop. Direct3D9Ex is available in Windows Vista and later if suitable drivers are available.
+     if (ANGLE_ENABLE_D3D9EX && Direct3DCreate9ExPtr && SUCCEEDED(Direct3DCreate9ExPtr(D3D_SDK_VERSION, &mD3d9Ex)))
+     {
+-        TRACE_EVENT0("gpu", "D3d9Ex_QueryInterface");
+         ASSERT(mD3d9Ex);
+         mD3d9Ex->QueryInterface(__uuidof(IDirect3D9), reinterpret_cast<void**>(&mD3d9));
+         ASSERT(mD3d9);
+     }
+     else
+     {
+-        TRACE_EVENT0("gpu", "Direct3DCreate9");
+         mD3d9 = Direct3DCreate9(D3D_SDK_VERSION);
+     }
+ 
+@@ -233,7 +228,6 @@ EGLint Renderer9::initialize()
+ 
+     // Give up on getting device caps after about one second.
+     {
+-        TRACE_EVENT0("gpu", "GetDeviceCaps");
+         for (int i = 0; i < 10; ++i)
+         {
+             result = mD3d9->GetDeviceCaps(mAdapter, mDeviceType, &mDeviceCaps);
+@@ -268,7 +262,6 @@ EGLint Renderer9::initialize()
+     }
+ 
+     {
+-        TRACE_EVENT0("gpu", "GetAdapterIdentifier");
+         mD3d9->GetAdapterIdentifier(mAdapter, 0, &mAdapterIdentifier);
+     }
+ 
+@@ -305,7 +298,6 @@ EGLint Renderer9::initialize()
+     static const TCHAR className[] = TEXT("STATIC");
+ 
+     {
+-        TRACE_EVENT0("gpu", "CreateWindowEx");
+         mDeviceWindow = CreateWindowEx(WS_EX_NOACTIVATE, className, windowName, WS_DISABLED | WS_POPUP, 0, 0, 1, 1, HWND_MESSAGE, NULL, GetModuleHandle(NULL), NULL);
+     }
+ 
+@@ -313,7 +305,6 @@ EGLint Renderer9::initialize()
+     DWORD behaviorFlags = D3DCREATE_FPU_PRESERVE | D3DCREATE_NOWINDOWCHANGES;
+ 
+     {
+-        TRACE_EVENT0("gpu", "D3d9_CreateDevice");
+         result = mD3d9->CreateDevice(mAdapter, mDeviceType, mDeviceWindow, behaviorFlags | D3DCREATE_HARDWARE_VERTEXPROCESSING | D3DCREATE_PUREDEVICE, &presentParameters, &mDevice);
+     }
+     if (result == D3DERR_OUTOFVIDEOMEMORY || result == E_OUTOFMEMORY || result == D3DERR_DEVICELOST)
+@@ -323,7 +314,6 @@ EGLint Renderer9::initialize()
+ 
+     if (FAILED(result))
+     {
+-        TRACE_EVENT0("gpu", "D3d9_CreateDevice2");
+         result = mD3d9->CreateDevice(mAdapter, mDeviceType, mDeviceWindow, behaviorFlags | D3DCREATE_SOFTWARE_VERTEXPROCESSING, &presentParameters, &mDevice);
+ 
+         if (FAILED(result))
+@@ -335,13 +325,11 @@ EGLint Renderer9::initialize()
+ 
+     if (mD3d9Ex)
+     {
+-        TRACE_EVENT0("gpu", "mDevice_QueryInterface");
+         result = mDevice->QueryInterface(__uuidof(IDirect3DDevice9Ex), (void**)&mDeviceEx);
+         ASSERT(SUCCEEDED(result));
+     }
+ 
+     {
+-        TRACE_EVENT0("gpu", "ShaderCache initialize");
+         mVertexShaderCache.initialize(mDevice);
+         mPixelShaderCache.initialize(mDevice);
+     }
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps
+index dc357d0..eb43eb3 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.ps
+@@ -11,7 +11,7 @@ uniform float4 add  : c1;
+ 
+ // Passthrough Pixel Shader
+ // Outputs texture 0 sampled at texcoord 0.
+-float4 passthroughps(float4 texcoord : TEXCOORD0) : COLOR
++float4 PS_passthrough(float4 texcoord : TEXCOORD0) : COLOR
+ {
+     return tex2D(tex, texcoord.xy);
+ };
+@@ -19,7 +19,7 @@ float4 passthroughps(float4 texcoord : TEXCOORD0) : COLOR
+ // Luminance Conversion Pixel Shader
+ // Performs a mad operation using the LA data from the texture with mult.xw and add.xw.
+ // Returns data in the form of llla
+-float4 luminanceps(float4 texcoord : TEXCOORD0) : COLOR
++float4 PS_luminance(float4 texcoord : TEXCOORD0) : COLOR
+ {
+     return (tex2D(tex, texcoord.xy).xw * mult.xw + add.xw).xxxy;
+ };
+@@ -27,7 +27,7 @@ float4 luminanceps(float4 texcoord : TEXCOORD0) : COLOR
+ // RGB/A Component Mask Pixel Shader
+ // Performs a mad operation using the texture's RGBA data with mult.xyzw and add.xyzw.
+ // Returns data in the form of rgba
+-float4 componentmaskps(float4 texcoord : TEXCOORD0) : COLOR
++float4 PS_componentmask(float4 texcoord : TEXCOORD0) : COLOR
+ {
+     return tex2D(tex, texcoord.xy) * mult + add;
+ };
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs
+index 3a36980..3bd611b 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/shaders/Blit.vs
+@@ -17,7 +17,7 @@ uniform float4 halfPixelSize : c0;
+ // Outputs the homogenous position as-is.
+ // Outputs a tex coord with (0,0) in the upper-left corner of the screen and (1,1) in the bottom right.
+ // C0.X must be negative half-pixel width, C0.Y must be half-pixel height. C0.ZW must be 0.
+-VS_OUTPUT standardvs(in float4 position : POSITION)
++VS_OUTPUT VS_standard(in float4 position : POSITION)
+ {
+     VS_OUTPUT Out;
+ 
+@@ -32,7 +32,7 @@ VS_OUTPUT standardvs(in float4 position : POSITION)
+ // Outputs the homogenous position as-is.
+ // Outputs a tex coord with (0,1) in the upper-left corner of the screen and (1,0) in the bottom right.
+ // C0.XY must be the half-pixel width and height. C0.ZW must be 0.
+-VS_OUTPUT flipyvs(in float4 position : POSITION)
++VS_OUTPUT VS_flipy(in float4 position : POSITION)
+ {
+     VS_OUTPUT Out;
+ 
+diff --git a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h b/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
+deleted file mode 100644
+index 1880056..0000000
+--- a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
++++ /dev/null
+@@ -1,826 +0,0 @@
+-// Copyright (c) 2013 The Chromium Authors. All rights reserved.
+-// Use of this source code is governed by a BSD-style license that can be
+-// found in the LICENSE file.
+-
+-// Trace events are for tracking application performance and resource usage.
+-// Macros are provided to track:
+-//    Begin and end of function calls
+-//    Counters
+-//
+-// Events are issued against categories. Whereas LOG's
+-// categories are statically defined, TRACE categories are created
+-// implicitly with a string. For example:
+-//   TRACE_EVENT_INSTANT0("MY_SUBSYSTEM", "SomeImportantEvent")
+-//
+-// Events can be INSTANT, or can be pairs of BEGIN and END in the same scope:
+-//   TRACE_EVENT_BEGIN0("MY_SUBSYSTEM", "SomethingCostly")
+-//   doSomethingCostly()
+-//   TRACE_EVENT_END0("MY_SUBSYSTEM", "SomethingCostly")
+-// Note: our tools can't always determine the correct BEGIN/END pairs unless
+-// these are used in the same scope. Use ASYNC_BEGIN/ASYNC_END macros if you need them
+-// to be in separate scopes.
+-//
+-// A common use case is to trace entire function scopes. This
+-// issues a trace BEGIN and END automatically:
+-//   void doSomethingCostly() {
+-//     TRACE_EVENT0("MY_SUBSYSTEM", "doSomethingCostly");
+-//     ...
+-//   }
+-//
+-// Additional parameters can be associated with an event:
+-//   void doSomethingCostly2(int howMuch) {
+-//     TRACE_EVENT1("MY_SUBSYSTEM", "doSomethingCostly",
+-//         "howMuch", howMuch);
+-//     ...
+-//   }
+-//
+-// The trace system will automatically add to this information the
+-// current process id, thread id, and a timestamp in microseconds.
+-//
+-// To trace an asynchronous procedure such as an IPC send/receive, use ASYNC_BEGIN and
+-// ASYNC_END:
+-//   [single threaded sender code]
+-//     static int send_count = 0;
+-//     ++send_count;
+-//     TRACE_EVENT_ASYNC_BEGIN0("ipc", "message", send_count);
+-//     Send(new MyMessage(send_count));
+-//   [receive code]
+-//     void OnMyMessage(send_count) {
+-//       TRACE_EVENT_ASYNC_END0("ipc", "message", send_count);
+-//     }
+-// The third parameter is a unique ID to match ASYNC_BEGIN/ASYNC_END pairs.
+-// ASYNC_BEGIN and ASYNC_END can occur on any thread of any traced process. Pointers can
+-// be used for the ID parameter, and they will be mangled internally so that
+-// the same pointer on two different processes will not match. For example:
+-//   class MyTracedClass {
+-//    public:
+-//     MyTracedClass() {
+-//       TRACE_EVENT_ASYNC_BEGIN0("category", "MyTracedClass", this);
+-//     }
+-//     ~MyTracedClass() {
+-//       TRACE_EVENT_ASYNC_END0("category", "MyTracedClass", this);
+-//     }
+-//   }
+-//
+-// Trace event also supports counters, which is a way to track a quantity
+-// as it varies over time. Counters are created with the following macro:
+-//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter", g_myCounterValue);
+-//
+-// Counters are process-specific. The macro itself can be issued from any
+-// thread, however.
+-//
+-// Sometimes, you want to track two counters at once. You can do this with two
+-// counter macros:
+-//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter0", g_myCounterValue[0]);
+-//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter1", g_myCounterValue[1]);
+-// Or you can do it with a combined macro:
+-//   TRACE_COUNTER2("MY_SUBSYSTEM", "myCounter",
+-//       "bytesPinned", g_myCounterValue[0],
+-//       "bytesAllocated", g_myCounterValue[1]);
+-// This indicates to the tracing UI that these counters should be displayed
+-// in a single graph, as a summed area chart.
+-//
+-// Since counters are in a global namespace, you may want to disembiguate with a
+-// unique ID, by using the TRACE_COUNTER_ID* variations.
+-//
+-// By default, trace collection is compiled in, but turned off at runtime.
+-// Collecting trace data is the responsibility of the embedding
+-// application. In Chrome's case, navigating to about:tracing will turn on
+-// tracing and display data collected across all active processes.
+-//
+-//
+-// Memory scoping note:
+-// Tracing copies the pointers, not the string content, of the strings passed
+-// in for category, name, and arg_names. Thus, the following code will
+-// cause problems:
+-//     char* str = strdup("impprtantName");
+-//     TRACE_EVENT_INSTANT0("SUBSYSTEM", str);  // BAD!
+-//     free(str);                   // Trace system now has dangling pointer
+-//
+-// To avoid this issue with the |name| and |arg_name| parameters, use the
+-// TRACE_EVENT_COPY_XXX overloads of the macros at additional runtime overhead.
+-// Notes: The category must always be in a long-lived char* (i.e. static const).
+-//        The |arg_values|, when used, are always deep copied with the _COPY
+-//        macros.
+-//
+-// When are string argument values copied:
+-// const char* arg_values are only referenced by default:
+-//     TRACE_EVENT1("category", "name",
+-//                  "arg1", "literal string is only referenced");
+-// Use TRACE_STR_COPY to force copying of a const char*:
+-//     TRACE_EVENT1("category", "name",
+-//                  "arg1", TRACE_STR_COPY("string will be copied"));
+-// std::string arg_values are always copied:
+-//     TRACE_EVENT1("category", "name",
+-//                  "arg1", std::string("string will be copied"));
+-//
+-//
+-// Thread Safety:
+-// A thread safe singleton and mutex are used for thread safety. Category
+-// enabled flags are used to limit the performance impact when the system
+-// is not enabled.
+-//
+-// TRACE_EVENT macros first cache a pointer to a category. The categories are
+-// statically allocated and safe at all times, even after exit. Fetching a
+-// category is protected by the TraceLog::lock_. Multiple threads initializing
+-// the static variable is safe, as they will be serialized by the lock and
+-// multiple calls will return the same pointer to the category.
+-//
+-// Then the category_enabled flag is checked. This is a unsigned char, and
+-// not intended to be multithread safe. It optimizes access to addTraceEvent
+-// which is threadsafe internally via TraceLog::lock_. The enabled flag may
+-// cause some threads to incorrectly call or skip calling addTraceEvent near
+-// the time of the system being enabled or disabled. This is acceptable as
+-// we tolerate some data loss while the system is being enabled/disabled and
+-// because addTraceEvent is threadsafe internally and checks the enabled state
+-// again under lock.
+-//
+-// Without the use of these static category pointers and enabled flags all
+-// trace points would carry a significant performance cost of aquiring a lock
+-// and resolving the category.
+-
+-#ifndef COMMON_TRACE_EVENT_H_
+-#define COMMON_TRACE_EVENT_H_
+-
+-#include <string>
+-
+-#include "common/event_tracer.h"
+-
+-// By default, const char* argument values are assumed to have long-lived scope
+-// and will not be copied. Use this macro to force a const char* to be copied.
+-#define TRACE_STR_COPY(str) \
+-    WebCore::TraceEvent::TraceStringWithCopy(str)
+-
+-// Records a pair of begin and end events called "name" for the current
+-// scope, with 0, 1 or 2 associated arguments. If the category is not
+-// enabled, then this does nothing.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-#define TRACE_EVENT0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name)
+-#define TRACE_EVENT1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name, arg1_name, arg1_val)
+-#define TRACE_EVENT2(category, name, arg1_name, arg1_val, arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-
+-// Records a single event called "name" immediately, with 0, 1 or 2
+-// associated arguments. If the category is not enabled, then this
+-// does nothing.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-#define TRACE_EVENT_INSTANT0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
+-        category, name, TRACE_EVENT_FLAG_NONE)
+-#define TRACE_EVENT_INSTANT1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
+-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
+-#define TRACE_EVENT_INSTANT2(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
+-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-#define TRACE_EVENT_COPY_INSTANT0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
+-        category, name, TRACE_EVENT_FLAG_COPY)
+-#define TRACE_EVENT_COPY_INSTANT1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
+-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val)
+-#define TRACE_EVENT_COPY_INSTANT2(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, \
+-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-
+-// Records a single BEGIN event called "name" immediately, with 0, 1 or 2
+-// associated arguments. If the category is not enabled, then this
+-// does nothing.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-#define TRACE_EVENT_BEGIN0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
+-        category, name, TRACE_EVENT_FLAG_NONE)
+-#define TRACE_EVENT_BEGIN1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
+-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
+-#define TRACE_EVENT_BEGIN2(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
+-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-#define TRACE_EVENT_COPY_BEGIN0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
+-        category, name, TRACE_EVENT_FLAG_COPY)
+-#define TRACE_EVENT_COPY_BEGIN1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
+-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val)
+-#define TRACE_EVENT_COPY_BEGIN2(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, \
+-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-
+-// Records a single END event for "name" immediately. If the category
+-// is not enabled, then this does nothing.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-#define TRACE_EVENT_END0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
+-        category, name, TRACE_EVENT_FLAG_NONE)
+-#define TRACE_EVENT_END1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
+-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
+-#define TRACE_EVENT_END2(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
+-        category, name, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-#define TRACE_EVENT_COPY_END0(category, name) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
+-        category, name, TRACE_EVENT_FLAG_COPY)
+-#define TRACE_EVENT_COPY_END1(category, name, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
+-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val)
+-#define TRACE_EVENT_COPY_END2(category, name, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, \
+-        category, name, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \
+-        arg2_name, arg2_val)
+-
+-// Records the value of a counter called "name" immediately. Value
+-// must be representable as a 32 bit integer.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-#define TRACE_COUNTER1(category, name, value) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, TRACE_EVENT_FLAG_NONE, \
+-        "value", static_cast<int>(value))
+-#define TRACE_COPY_COUNTER1(category, name, value) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, TRACE_EVENT_FLAG_COPY, \
+-        "value", static_cast<int>(value))
+-
+-// Records the values of a multi-parted counter called "name" immediately.
+-// The UI will treat value1 and value2 as parts of a whole, displaying their
+-// values as a stacked-bar chart.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-#define TRACE_COUNTER2(category, name, value1_name, value1_val, \
+-        value2_name, value2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, TRACE_EVENT_FLAG_NONE, \
+-        value1_name, static_cast<int>(value1_val), \
+-        value2_name, static_cast<int>(value2_val))
+-#define TRACE_COPY_COUNTER2(category, name, value1_name, value1_val, \
+-        value2_name, value2_val) \
+-    INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, TRACE_EVENT_FLAG_COPY, \
+-        value1_name, static_cast<int>(value1_val), \
+-        value2_name, static_cast<int>(value2_val))
+-
+-// Records the value of a counter called "name" immediately. Value
+-// must be representable as a 32 bit integer.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-// - |id| is used to disambiguate counters with the same name. It must either
+-//   be a pointer or an integer value up to 64 bits. If it's a pointer, the bits
+-//   will be xored with a hash of the process ID so that the same pointer on
+-//   two different processes will not collide.
+-#define TRACE_COUNTER_ID1(category, name, id, value) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, \
+-        "value", static_cast<int>(value))
+-#define TRACE_COPY_COUNTER_ID1(category, name, id, value) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, \
+-        "value", static_cast<int>(value))
+-
+-// Records the values of a multi-parted counter called "name" immediately.
+-// The UI will treat value1 and value2 as parts of a whole, displaying their
+-// values as a stacked-bar chart.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-// - |id| is used to disambiguate counters with the same name. It must either
+-//   be a pointer or an integer value up to 64 bits. If it's a pointer, the bits
+-//   will be xored with a hash of the process ID so that the same pointer on
+-//   two different processes will not collide.
+-#define TRACE_COUNTER_ID2(category, name, id, value1_name, value1_val, \
+-        value2_name, value2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, \
+-        value1_name, static_cast<int>(value1_val), \
+-        value2_name, static_cast<int>(value2_val))
+-#define TRACE_COPY_COUNTER_ID2(category, name, id, value1_name, value1_val, \
+-        value2_name, value2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, \
+-        value1_name, static_cast<int>(value1_val), \
+-        value2_name, static_cast<int>(value2_val))
+-
+-// Records a single ASYNC_BEGIN event called "name" immediately, with 0, 1 or 2
+-// associated arguments. If the category is not enabled, then this
+-// does nothing.
+-// - category and name strings must have application lifetime (statics or
+-//   literals). They may not include " chars.
+-// - |id| is used to match the ASYNC_BEGIN event with the ASYNC_END event. ASYNC
+-//   events are considered to match if their category, name and id values all
+-//   match. |id| must either be a pointer or an integer value up to 64 bits. If
+-//   it's a pointer, the bits will be xored with a hash of the process ID so
+-//   that the same pointer on two different processes will not collide.
+-// An asynchronous operation can consist of multiple phases. The first phase is
+-// defined by the ASYNC_BEGIN calls. Additional phases can be defined using the
+-// ASYNC_STEP_BEGIN macros. When the operation completes, call ASYNC_END.
+-// An async operation can span threads and processes, but all events in that
+-// operation must use the same |name| and |id|. Each event can have its own
+-// args.
+-#define TRACE_EVENT_ASYNC_BEGIN0(category, name, id) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE)
+-#define TRACE_EVENT_ASYNC_BEGIN1(category, name, id, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
+-#define TRACE_EVENT_ASYNC_BEGIN2(category, name, id, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, \
+-        arg1_name, arg1_val, arg2_name, arg2_val)
+-#define TRACE_EVENT_COPY_ASYNC_BEGIN0(category, name, id) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY)
+-#define TRACE_EVENT_COPY_ASYNC_BEGIN1(category, name, id, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, \
+-        arg1_name, arg1_val)
+-#define TRACE_EVENT_COPY_ASYNC_BEGIN2(category, name, id, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, \
+-        arg1_name, arg1_val, arg2_name, arg2_val)
+-
+-// Records a single ASYNC_STEP event for |step| immediately. If the category
+-// is not enabled, then this does nothing. The |name| and |id| must match the
+-// ASYNC_BEGIN event above. The |step| param identifies this step within the
+-// async event. This should be called at the beginning of the next phase of an
+-// asynchronous operation.
+-#define TRACE_EVENT_ASYNC_STEP0(category, name, id, step) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, "step", step)
+-#define TRACE_EVENT_ASYNC_STEP1(category, name, id, step, \
+-                                      arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, "step", step, \
+-        arg1_name, arg1_val)
+-#define TRACE_EVENT_COPY_ASYNC_STEP0(category, name, id, step) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, "step", step)
+-#define TRACE_EVENT_COPY_ASYNC_STEP1(category, name, id, step, \
+-        arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, "step", step, \
+-        arg1_name, arg1_val)
+-
+-// Records a single ASYNC_END event for "name" immediately. If the category
+-// is not enabled, then this does nothing.
+-#define TRACE_EVENT_ASYNC_END0(category, name, id) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE)
+-#define TRACE_EVENT_ASYNC_END1(category, name, id, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val)
+-#define TRACE_EVENT_ASYNC_END2(category, name, id, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
+-        category, name, id, TRACE_EVENT_FLAG_NONE, \
+-        arg1_name, arg1_val, arg2_name, arg2_val)
+-#define TRACE_EVENT_COPY_ASYNC_END0(category, name, id) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY)
+-#define TRACE_EVENT_COPY_ASYNC_END1(category, name, id, arg1_name, arg1_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, \
+-        arg1_name, arg1_val)
+-#define TRACE_EVENT_COPY_ASYNC_END2(category, name, id, arg1_name, arg1_val, \
+-        arg2_name, arg2_val) \
+-    INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \
+-        category, name, id, TRACE_EVENT_FLAG_COPY, \
+-        arg1_name, arg1_val, arg2_name, arg2_val)
+-
+-// Creates a scope of a sampling state with the given category and name (both must
+-// be constant strings). These states are intended for a sampling profiler.
+-// Implementation note: we store category and name together because we don't
+-// want the inconsistency/expense of storing two pointers.
+-// |thread_bucket| is [0..2] and is used to statically isolate samples in one
+-// thread from others.
+-//
+-// {  // The sampling state is set within this scope.
+-//    TRACE_EVENT_SAMPLING_STATE_SCOPE_FOR_BUCKET(0, "category", "name");
+-//    ...;
+-// }
+-#define TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \
+-    TraceEvent::SamplingStateScope<bucket_number> traceEventSamplingScope(category "\0" name);
+-
+-// Returns a current sampling state of the given bucket.
+-// The format of the returned string is "category\0name".
+-#define TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(bucket_number) \
+-    TraceEvent::SamplingStateScope<bucket_number>::current()
+-
+-// Sets a current sampling state of the given bucket.
+-// |category| and |name| have to be constant strings.
+-#define TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \
+-    TraceEvent::SamplingStateScope<bucket_number>::set(category "\0" name)
+-
+-// Sets a current sampling state of the given bucket.
+-// |categoryAndName| doesn't need to be a constant string.
+-// The format of the string is "category\0name".
+-#define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(bucket_number, categoryAndName) \
+-    TraceEvent::SamplingStateScope<bucket_number>::set(categoryAndName)
+-
+-// Syntactic sugars for the sampling tracing in the main thread.
+-#define TRACE_EVENT_SCOPED_SAMPLING_STATE(category, name) \
+-    TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(0, category, name)
+-#define TRACE_EVENT_GET_SAMPLING_STATE() \
+-    TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(0)
+-#define TRACE_EVENT_SET_SAMPLING_STATE(category, name) \
+-    TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(0, category, name)
+-#define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE(categoryAndName) \
+-    TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(0, categoryAndName)
+-
+-////////////////////////////////////////////////////////////////////////////////
+-// Implementation specific tracing API definitions.
+-
+-// Get a pointer to the enabled state of the given trace category. Only
+-// long-lived literal strings should be given as the category name. The returned
+-// pointer can be held permanently in a local static for example. If the
+-// unsigned char is non-zero, tracing is enabled. If tracing is enabled,
+-// TRACE_EVENT_API_ADD_TRACE_EVENT can be called. It's OK if tracing is disabled
+-// between the load of the tracing state and the call to
+-// TRACE_EVENT_API_ADD_TRACE_EVENT, because this flag only provides an early out
+-// for best performance when tracing is disabled.
+-// const unsigned char*
+-//     TRACE_EVENT_API_GET_CATEGORY_ENABLED(const char* category_name)
+-#define TRACE_EVENT_API_GET_CATEGORY_ENABLED \
+-    gl::TraceGetTraceCategoryEnabledFlag
+-
+-// Add a trace event to the platform tracing system.
+-// void TRACE_EVENT_API_ADD_TRACE_EVENT(
+-//                    char phase,
+-//                    const unsigned char* category_enabled,
+-//                    const char* name,
+-//                    unsigned long long id,
+-//                    int num_args,
+-//                    const char** arg_names,
+-//                    const unsigned char* arg_types,
+-//                    const unsigned long long* arg_values,
+-//                    unsigned char flags)
+-#define TRACE_EVENT_API_ADD_TRACE_EVENT \
+-    gl::TraceAddTraceEvent
+-
+-////////////////////////////////////////////////////////////////////////////////
+-
+-// Implementation detail: trace event macros create temporary variables
+-// to keep instrumentation overhead low. These macros give each temporary
+-// variable a unique name based on the line number to prevent name collissions.
+-#define INTERNAL_TRACE_EVENT_UID3(a, b) \
+-    trace_event_unique_##a##b
+-#define INTERNAL_TRACE_EVENT_UID2(a, b) \
+-    INTERNAL_TRACE_EVENT_UID3(a, b)
+-#define INTERNALTRACEEVENTUID(name_prefix) \
+-    INTERNAL_TRACE_EVENT_UID2(name_prefix, __LINE__)
+-
+-// Implementation detail: internal macro to create static category.
+-#define INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category) \
+-    static const unsigned char* INTERNALTRACEEVENTUID(catstatic) = 0; \
+-    if (!INTERNALTRACEEVENTUID(catstatic)) \
+-      INTERNALTRACEEVENTUID(catstatic) = \
+-          TRACE_EVENT_API_GET_CATEGORY_ENABLED(category);
+-
+-// Implementation detail: internal macro to create static category and add
+-// event if the category is enabled.
+-#define INTERNAL_TRACE_EVENT_ADD(phase, category, name, flags, ...) \
+-    do { \
+-        INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category); \
+-        if (*INTERNALTRACEEVENTUID(catstatic)) { \
+-            gl::TraceEvent::addTraceEvent( \
+-                phase, INTERNALTRACEEVENTUID(catstatic), name, \
+-                gl::TraceEvent::noEventId, flags, ##__VA_ARGS__); \
+-        } \
+-    } while (0)
+-
+-// Implementation detail: internal macro to create static category and add begin
+-// event if the category is enabled. Also adds the end event when the scope
+-// ends.
+-#define INTERNAL_TRACE_EVENT_ADD_SCOPED(category, name, ...) \
+-    INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category); \
+-    gl::TraceEvent::TraceEndOnScopeClose \
+-        INTERNALTRACEEVENTUID(profileScope); \
+-    if (*INTERNALTRACEEVENTUID(catstatic)) { \
+-      gl::TraceEvent::addTraceEvent( \
+-          TRACE_EVENT_PHASE_BEGIN, \
+-          INTERNALTRACEEVENTUID(catstatic), \
+-          name, gl::TraceEvent::noEventId, \
+-          TRACE_EVENT_FLAG_NONE, ##__VA_ARGS__); \
+-      INTERNALTRACEEVENTUID(profileScope).initialize( \
+-          INTERNALTRACEEVENTUID(catstatic), name); \
+-    }
+-
+-// Implementation detail: internal macro to create static category and add
+-// event if the category is enabled.
+-#define INTERNAL_TRACE_EVENT_ADD_WITH_ID(phase, category, name, id, flags, \
+-                                         ...) \
+-    do { \
+-        INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category); \
+-        if (*INTERNALTRACEEVENTUID(catstatic)) { \
+-            unsigned char traceEventFlags = flags | TRACE_EVENT_FLAG_HAS_ID; \
+-            gl::TraceEvent::TraceID traceEventTraceID( \
+-                id, &traceEventFlags); \
+-            gl::TraceEvent::addTraceEvent( \
+-                phase, INTERNALTRACEEVENTUID(catstatic), \
+-                name, traceEventTraceID.data(), traceEventFlags, \
+-                ##__VA_ARGS__); \
+-        } \
+-    } while (0)
+-
+-// Notes regarding the following definitions:
+-// New values can be added and propagated to third party libraries, but existing
+-// definitions must never be changed, because third party libraries may use old
+-// definitions.
+-
+-// Phase indicates the nature of an event entry. E.g. part of a begin/end pair.
+-#define TRACE_EVENT_PHASE_BEGIN    ('B')
+-#define TRACE_EVENT_PHASE_END      ('E')
+-#define TRACE_EVENT_PHASE_INSTANT  ('I')
+-#define TRACE_EVENT_PHASE_ASYNC_BEGIN ('S')
+-#define TRACE_EVENT_PHASE_ASYNC_STEP  ('T')
+-#define TRACE_EVENT_PHASE_ASYNC_END   ('F')
+-#define TRACE_EVENT_PHASE_METADATA ('M')
+-#define TRACE_EVENT_PHASE_COUNTER  ('C')
+-#define TRACE_EVENT_PHASE_SAMPLE  ('P')
+-
+-// Flags for changing the behavior of TRACE_EVENT_API_ADD_TRACE_EVENT.
+-#define TRACE_EVENT_FLAG_NONE        (static_cast<unsigned char>(0))
+-#define TRACE_EVENT_FLAG_COPY        (static_cast<unsigned char>(1 << 0))
+-#define TRACE_EVENT_FLAG_HAS_ID      (static_cast<unsigned char>(1 << 1))
+-#define TRACE_EVENT_FLAG_MANGLE_ID   (static_cast<unsigned char>(1 << 2))
+-
+-// Type values for identifying types in the TraceValue union.
+-#define TRACE_VALUE_TYPE_BOOL         (static_cast<unsigned char>(1))
+-#define TRACE_VALUE_TYPE_UINT         (static_cast<unsigned char>(2))
+-#define TRACE_VALUE_TYPE_INT          (static_cast<unsigned char>(3))
+-#define TRACE_VALUE_TYPE_DOUBLE       (static_cast<unsigned char>(4))
+-#define TRACE_VALUE_TYPE_POINTER      (static_cast<unsigned char>(5))
+-#define TRACE_VALUE_TYPE_STRING       (static_cast<unsigned char>(6))
+-#define TRACE_VALUE_TYPE_COPY_STRING  (static_cast<unsigned char>(7))
+-
+-
+-namespace gl {
+-
+-namespace TraceEvent {
+-
+-// Specify these values when the corresponding argument of addTraceEvent is not
+-// used.
+-const int zeroNumArgs = 0;
+-const unsigned long long noEventId = 0;
+-
+-// TraceID encapsulates an ID that can either be an integer or pointer. Pointers
+-// are mangled with the Process ID so that they are unlikely to collide when the
+-// same pointer is used on different processes.
+-class TraceID {
+-public:
+-    explicit TraceID(const void* id, unsigned char* flags) :
+-        m_data(static_cast<unsigned long long>(reinterpret_cast<unsigned long>(id)))
+-    {
+-        *flags |= TRACE_EVENT_FLAG_MANGLE_ID;
+-    }
+-    explicit TraceID(unsigned long long id, unsigned char* flags) : m_data(id) { (void)flags; }
+-    explicit TraceID(unsigned long id, unsigned char* flags) : m_data(id) { (void)flags; }
+-    explicit TraceID(unsigned int id, unsigned char* flags) : m_data(id) { (void)flags; }
+-    explicit TraceID(unsigned short id, unsigned char* flags) : m_data(id) { (void)flags; }
+-    explicit TraceID(unsigned char id, unsigned char* flags) : m_data(id) { (void)flags; }
+-    explicit TraceID(long long id, unsigned char* flags) :
+-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
+-    explicit TraceID(long id, unsigned char* flags) :
+-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
+-    explicit TraceID(int id, unsigned char* flags) :
+-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
+-    explicit TraceID(short id, unsigned char* flags) :
+-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
+-    explicit TraceID(signed char id, unsigned char* flags) :
+-        m_data(static_cast<unsigned long long>(id)) { (void)flags; }
+-
+-    unsigned long long data() const { return m_data; }
+-
+-private:
+-    unsigned long long m_data;
+-};
+-
+-// Simple union to store various types as unsigned long long.
+-union TraceValueUnion {
+-    bool m_bool;
+-    unsigned long long m_uint;
+-    long long m_int;
+-    double m_double;
+-    const void* m_pointer;
+-    const char* m_string;
+-};
+-
+-// Simple container for const char* that should be copied instead of retained.
+-class TraceStringWithCopy {
+-public:
+-    explicit TraceStringWithCopy(const char* str) : m_str(str) { }
+-    operator const char* () const { return m_str; }
+-private:
+-    const char* m_str;
+-};
+-
+-// Define setTraceValue for each allowed type. It stores the type and
+-// value in the return arguments. This allows this API to avoid declaring any
+-// structures so that it is portable to third_party libraries.
+-#define INTERNAL_DECLARE_SET_TRACE_VALUE(actual_type, \
+-                                         union_member, \
+-                                         value_type_id) \
+-    static inline void setTraceValue(actual_type arg, \
+-                                     unsigned char* type, \
+-                                     unsigned long long* value) { \
+-        TraceValueUnion typeValue; \
+-        typeValue.union_member = arg; \
+-        *type = value_type_id; \
+-        *value = typeValue.m_uint; \
+-    }
+-// Simpler form for int types that can be safely casted.
+-#define INTERNAL_DECLARE_SET_TRACE_VALUE_INT(actual_type, \
+-                                             value_type_id) \
+-    static inline void setTraceValue(actual_type arg, \
+-                                     unsigned char* type, \
+-                                     unsigned long long* value) { \
+-        *type = value_type_id; \
+-        *value = static_cast<unsigned long long>(arg); \
+-    }
+-
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned long long, TRACE_VALUE_TYPE_UINT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned int, TRACE_VALUE_TYPE_UINT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned short, TRACE_VALUE_TYPE_UINT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned char, TRACE_VALUE_TYPE_UINT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(long long, TRACE_VALUE_TYPE_INT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(int, TRACE_VALUE_TYPE_INT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(short, TRACE_VALUE_TYPE_INT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE_INT(signed char, TRACE_VALUE_TYPE_INT)
+-INTERNAL_DECLARE_SET_TRACE_VALUE(bool, m_bool, TRACE_VALUE_TYPE_BOOL)
+-INTERNAL_DECLARE_SET_TRACE_VALUE(double, m_double, TRACE_VALUE_TYPE_DOUBLE)
+-INTERNAL_DECLARE_SET_TRACE_VALUE(const void*, m_pointer,
+-                                 TRACE_VALUE_TYPE_POINTER)
+-INTERNAL_DECLARE_SET_TRACE_VALUE(const char*, m_string,
+-                                 TRACE_VALUE_TYPE_STRING)
+-INTERNAL_DECLARE_SET_TRACE_VALUE(const TraceStringWithCopy&, m_string,
+-                                 TRACE_VALUE_TYPE_COPY_STRING)
+-
+-#undef INTERNAL_DECLARE_SET_TRACE_VALUE
+-#undef INTERNAL_DECLARE_SET_TRACE_VALUE_INT
+-
+-static inline void setTraceValue(const std::string& arg,
+-                                 unsigned char* type,
+-                                 unsigned long long* value) {
+-    TraceValueUnion typeValue;
+-    typeValue.m_string = arg.data();
+-    *type = TRACE_VALUE_TYPE_COPY_STRING;
+-    *value = typeValue.m_uint;
+-}
+-
+-// These addTraceEvent template functions are defined here instead of in the
+-// macro, because the arg values could be temporary string objects. In order to
+-// store pointers to the internal c_str and pass through to the tracing API, the
+-// arg values must live throughout these procedures.
+-
+-static inline void addTraceEvent(char phase,
+-                                const unsigned char* categoryEnabled,
+-                                const char* name,
+-                                unsigned long long id,
+-                                unsigned char flags) {
+-    TRACE_EVENT_API_ADD_TRACE_EVENT(
+-        phase, categoryEnabled, name, id,
+-        zeroNumArgs, 0, 0, 0,
+-        flags);
+-}
+-
+-template<class ARG1_TYPE>
+-static inline void addTraceEvent(char phase,
+-                                const unsigned char* categoryEnabled,
+-                                const char* name,
+-                                unsigned long long id,
+-                                unsigned char flags,
+-                                const char* arg1Name,
+-                                const ARG1_TYPE& arg1Val) {
+-    const int numArgs = 1;
+-    unsigned char argTypes[1];
+-    unsigned long long argValues[1];
+-    setTraceValue(arg1Val, &argTypes[0], &argValues[0]);
+-    TRACE_EVENT_API_ADD_TRACE_EVENT(
+-        phase, categoryEnabled, name, id,
+-        numArgs, &arg1Name, argTypes, argValues,
+-        flags);
+-}
+-
+-template<class ARG1_TYPE, class ARG2_TYPE>
+-static inline void addTraceEvent(char phase,
+-                                const unsigned char* categoryEnabled,
+-                                const char* name,
+-                                unsigned long long id,
+-                                unsigned char flags,
+-                                const char* arg1Name,
+-                                const ARG1_TYPE& arg1Val,
+-                                const char* arg2Name,
+-                                const ARG2_TYPE& arg2Val) {
+-    const int numArgs = 2;
+-    const char* argNames[2] = { arg1Name, arg2Name };
+-    unsigned char argTypes[2];
+-    unsigned long long argValues[2];
+-    setTraceValue(arg1Val, &argTypes[0], &argValues[0]);
+-    setTraceValue(arg2Val, &argTypes[1], &argValues[1]);
+-    return TRACE_EVENT_API_ADD_TRACE_EVENT(
+-        phase, categoryEnabled, name, id,
+-        numArgs, argNames, argTypes, argValues,
+-        flags);
+-}
+-
+-// Used by TRACE_EVENTx macro. Do not use directly.
+-class TraceEndOnScopeClose {
+-public:
+-    // Note: members of m_data intentionally left uninitialized. See initialize.
+-    TraceEndOnScopeClose() : m_pdata(0) { }
+-    ~TraceEndOnScopeClose()
+-    {
+-        if (m_pdata)
+-            addEventIfEnabled();
+-    }
+-
+-    void initialize(const unsigned char* categoryEnabled,
+-                    const char* name)
+-    {
+-        m_data.categoryEnabled = categoryEnabled;
+-        m_data.name = name;
+-        m_pdata = &m_data;
+-    }
+-
+-private:
+-    // Add the end event if the category is still enabled.
+-    void addEventIfEnabled()
+-    {
+-        // Only called when m_pdata is non-null.
+-        if (*m_pdata->categoryEnabled) {
+-            TRACE_EVENT_API_ADD_TRACE_EVENT(
+-                TRACE_EVENT_PHASE_END,
+-                m_pdata->categoryEnabled,
+-                m_pdata->name, noEventId,
+-                zeroNumArgs, 0, 0, 0,
+-                TRACE_EVENT_FLAG_NONE);
+-        }
+-    }
+-
+-    // This Data struct workaround is to avoid initializing all the members
+-    // in Data during construction of this object, since this object is always
+-    // constructed, even when tracing is disabled. If the members of Data were
+-    // members of this class instead, compiler warnings occur about potential
+-    // uninitialized accesses.
+-    struct Data {
+-        const unsigned char* categoryEnabled;
+-        const char* name;
+-    };
+-    Data* m_pdata;
+-    Data m_data;
+-};
+-
+-// TraceEventSamplingStateScope records the current sampling state
+-// and sets a new sampling state. When the scope exists, it restores
+-// the sampling state having recorded.
+-template<size_t BucketNumber>
+-class SamplingStateScope {
+-public:
+-    SamplingStateScope(const char* categoryAndName)
+-    {
+-        m_previousState = SamplingStateScope<BucketNumber>::current();
+-        SamplingStateScope<BucketNumber>::set(categoryAndName);
+-    }
+-
+-    ~SamplingStateScope()
+-    {
+-        SamplingStateScope<BucketNumber>::set(m_previousState);
+-    }
+-
+-    // FIXME: Make load/store to traceSamplingState[] thread-safe and atomic.
+-    static inline const char* current()
+-    {
+-        return reinterpret_cast<const char*>(*gl::traceSamplingState[BucketNumber]);
+-    }
+-    static inline void set(const char* categoryAndName)
+-    {
+-        *gl::traceSamplingState[BucketNumber] = reinterpret_cast<long>(const_cast<char*>(categoryAndName));
+-    }
+-
+-private:
+-    const char* m_previousState;
+-};
+-
+-} // namespace TraceEvent
+-
+-} // namespace gl
+-
+-#endif
+diff --git a/src/angle/src/common/common.pri b/src/angle/src/common/common.pri
+index fd1c31c..8baedc5 100644
+--- a/src/angle/src/common/common.pri
++++ b/src/angle/src/common/common.pri
+@@ -51,7 +51,6 @@ static: DEFINES *= QT_OPENGL_ES_2_ANGLE_STATIC
+ HEADERS +=  \
+     $$ANGLE_DIR/src/common/angleutils.h \
+     $$ANGLE_DIR/src/common/debug.h \
+-    $$ANGLE_DIR/src/common/event_tracer.h \
+     $$ANGLE_DIR/src/common/mathutil.h \
+     $$ANGLE_DIR/src/common/platform.h \
+     $$ANGLE_DIR/src/common/RefCountObject.h \
+@@ -61,7 +60,6 @@ HEADERS +=  \
+ SOURCES +=  \
+     $$ANGLE_DIR/src/common/angleutils.cpp \
+     $$ANGLE_DIR/src/common/debug.cpp \
+-    $$ANGLE_DIR/src/common/event_tracer.cpp \
+     $$ANGLE_DIR/src/common/RefCountObject.cpp \
+     $$ANGLE_DIR/src/common/tls.cpp
+ 
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0001-Fix-compilation-for-MSVC-2008-and-std-tuple.patch b/src/angle/patches/0001-Fix-compilation-for-MSVC-2008-and-std-tuple.patch
index 06ab16abdb..f2252540eb 100644
--- a/src/angle/patches/0001-Fix-compilation-for-MSVC-2008-and-std-tuple.patch
+++ b/src/angle/patches/0001-Fix-compilation-for-MSVC-2008-and-std-tuple.patch
@@ -1,7 +1,7 @@
-From 88297d02fd1aed6cac258b72d9d0a8baabad6203 Mon Sep 17 00:00:00 2001
+From 3ea314039783d2e6e558cb10aa86dbf278631eef Mon Sep 17 00:00:00 2001
 From: Thomas Hartmann <Thomas.Hartmann@digia.com>
-Date: Mon, 17 Feb 2014 16:56:51 +0200
-Subject: [PATCH] Fix compilation for MSVC 2008 and std::tuple
+Date: Tue, 16 Sep 2014 23:24:24 +0300
+Subject: [PATCH 01/16] Fix compilation for MSVC 2008 and std::tuple
 
 For MSVC 2008 make_tuple is in the tr1 namespace.
 
@@ -11,10 +11,10 @@ Change-Id: I4a51f6cabdf068993869b404b12ed1484a21a9d4
  1 file changed, 4 insertions(+)
 
 diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp
-index 610a5ef..51d7f0b 100644
+index d472e14..f68ac38 100644
 --- a/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp
 +++ b/src/3rdparty/angle/src/libGLESv2/renderer/IndexRangeCache.cpp
-@@ -81,7 +81,11 @@ IndexRangeCache::IndexRange::IndexRange(GLenum typ, intptr_t off, GLsizei c)
+@@ -111,7 +111,11 @@ IndexRangeCache::IndexRange::IndexRange(GLenum typ, intptr_t off, GLsizei c)
  
  bool IndexRangeCache::IndexRange::operator<(const IndexRange& rhs) const
  {
@@ -27,5 +27,5 @@ index 610a5ef..51d7f0b 100644
  
  IndexRangeCache::IndexBounds::IndexBounds()
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0002-Fix-compilation-of-ANGLE-with-mingw-tdm64-gcc-4.8.1.patch b/src/angle/patches/0002-Fix-compilation-of-ANGLE-with-mingw-tdm64-gcc-4.8.1.patch
index 8b91d4b8ea..322d121149 100644
--- a/src/angle/patches/0002-Fix-compilation-of-ANGLE-with-mingw-tdm64-gcc-4.8.1.patch
+++ b/src/angle/patches/0002-Fix-compilation-of-ANGLE-with-mingw-tdm64-gcc-4.8.1.patch
@@ -1,7 +1,7 @@
-From 95e3ca47772ef0552662b1d04b7ee08d9d1d2338 Mon Sep 17 00:00:00 2001
+From 9f1217589c029d2f91e863c54f7f9d52ef496f71 Mon Sep 17 00:00:00 2001
 From: Kai Koehne <kai.koehne@digia.com>
-Date: Mon, 17 Feb 2014 16:59:19 +0200
-Subject: [PATCH] Fix compilation of ANGLE with mingw-tdm64 gcc 4.8.1
+Date: Tue, 16 Sep 2014 23:33:42 +0300
+Subject: [PATCH 02/16] Fix compilation of ANGLE with mingw-tdm64 gcc 4.8.1
 
 Do not rely on sprintf_s being declared/defined. This also fixes
 deployment to Windows XP.
@@ -16,10 +16,10 @@ Change-Id: I520e2f61aeab34963e7a57baafd413c7db93f110
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/src/3rdparty/angle/src/libEGL/Display.cpp b/src/3rdparty/angle/src/libEGL/Display.cpp
-index a382c3b..13ef701 100644
+index ecf3395..aaebdb3 100644
 --- a/src/3rdparty/angle/src/libEGL/Display.cpp
 +++ b/src/3rdparty/angle/src/libEGL/Display.cpp
-@@ -523,7 +523,7 @@ void Display::initVendorString()
+@@ -597,7 +597,7 @@ void Display::initVendorString()
      if (mRenderer && mRenderer->getLUID(&adapterLuid))
      {
          char adapterLuidString[64];
@@ -29,5 +29,5 @@ index a382c3b..13ef701 100644
          mVendorString += adapterLuidString;
      }
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0003-Fix-compilation-with-MinGW-gcc-64-bit.patch b/src/angle/patches/0003-Fix-compilation-with-MinGW-gcc-64-bit.patch
deleted file mode 100644
index 7d70057a9a..0000000000
--- a/src/angle/patches/0003-Fix-compilation-with-MinGW-gcc-64-bit.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From a03d8f647816767525489a2b26663d897f0264a0 Mon Sep 17 00:00:00 2001
-From: Kai Koehne <kai.koehne@digia.com>
-Date: Tue, 18 Feb 2014 09:34:39 +0200
-Subject: [PATCH] Fix compilation with MinGW gcc 64 bit
-
-Fix compilation of ANGLE with gcc 4.8.0 64 bit: The
-
-  reinterpret_cast<unsigned long>(void*)
-
-was causing
-
-  error: cast from 'const void*' to 'long unsigned int' loses precision
-
-Task-number: QTBUG-34395
-Change-Id: Ibde75dd4b5536f3827bdf0ab02a15e93a1a8a4f0
----
- src/3rdparty/angle/src/third_party/trace_event/trace_event.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h b/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
-index 1880056..637cf9a 100644
---- a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
-+++ b/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
-@@ -587,7 +587,7 @@ const unsigned long long noEventId = 0;
- class TraceID {
- public:
-     explicit TraceID(const void* id, unsigned char* flags) :
--        m_data(static_cast<unsigned long long>(reinterpret_cast<unsigned long>(id)))
-+        m_data(reinterpret_cast<unsigned long long>(id))
-     {
-         *flags |= TRACE_EVENT_FLAG_MANGLE_ID;
-     }
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0004-Make-it-possible-to-link-ANGLE-statically-for-single.patch b/src/angle/patches/0004-Make-it-possible-to-link-ANGLE-statically-for-single.patch
index 2c95c5bcfa..1dfe6154e7 100644
--- a/src/angle/patches/0004-Make-it-possible-to-link-ANGLE-statically-for-single.patch
+++ b/src/angle/patches/0004-Make-it-possible-to-link-ANGLE-statically-for-single.patch
@@ -1,7 +1,7 @@
-From 9b24b25eeb5ca97d7978c6840fdb1e903bf63a55 Mon Sep 17 00:00:00 2001
+From cb00356bad800ca2397301cb8b79ad0b097bddd8 Mon Sep 17 00:00:00 2001
 From: Friedemann Kleint <Friedemann.Kleint@digia.com>
-Date: Tue, 18 Feb 2014 09:52:52 +0200
-Subject: [PATCH] Make it possible to link ANGLE statically for
+Date: Tue, 16 Sep 2014 23:43:00 +0300
+Subject: [PATCH 04/16] Make it possible to link ANGLE statically for
  single-thread use.
 
 Fix exports and provide static instances of thread-local
@@ -9,10 +9,10 @@ data depending on QT_OPENGL_ES_2_ANGLE_STATIC.
 
 Change-Id: Ifab25a820adf5953bb3b09036de53dbf7f1a7fd5
 ---
- src/3rdparty/angle/include/KHR/khrplatform.h | 2 +-
- src/3rdparty/angle/src/libEGL/main.cpp       | 6 ++++++
- src/3rdparty/angle/src/libGLESv2/main.cpp    | 6 ++++++
- 3 files changed, 13 insertions(+), 1 deletion(-)
+ src/3rdparty/angle/include/KHR/khrplatform.h |  2 +-
+ src/3rdparty/angle/src/libEGL/main.cpp       | 10 ++++++++++
+ src/3rdparty/angle/src/libGLESv2/main.cpp    | 10 ++++++++++
+ 3 files changed, 21 insertions(+), 1 deletion(-)
 
 diff --git a/src/3rdparty/angle/include/KHR/khrplatform.h b/src/3rdparty/angle/include/KHR/khrplatform.h
 index c9e6f17..1ac2d3f 100644
@@ -28,41 +28,81 @@ index c9e6f17..1ac2d3f 100644
  #elif defined (__SYMBIAN32__)
  #   define KHRONOS_APICALL IMPORT_C
 diff --git a/src/3rdparty/angle/src/libEGL/main.cpp b/src/3rdparty/angle/src/libEGL/main.cpp
-index 80dcc34..772b8eb 100644
+index 0f8439c..8a1baef 100644
 --- a/src/3rdparty/angle/src/libEGL/main.cpp
 +++ b/src/3rdparty/angle/src/libEGL/main.cpp
-@@ -106,7 +106,13 @@ namespace egl
+@@ -49,6 +49,8 @@ void DeallocateCurrent()
+ 
+ }
+ 
++#ifndef QT_OPENGL_ES_2_ANGLE_STATIC
++
+ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved)
+ {
+     switch (reason)
+@@ -100,16 +102,24 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
+     return TRUE;
+ }
+ 
++#endif // !QT_OPENGL_ES_2_ANGLE_STATIC
++
+ namespace egl
+ {
  
  Current *GetCurrentData()
  {
 +#ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-     Current *current = (Current*)TlsGetValue(currentTLS);
+     Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
+ 
+     // ANGLE issue 488: when the dll is loaded after thread initialization,
+     // thread local storage (current) might not exist yet.
+     return (current ? current : AllocateCurrent());
 +#else
 +    // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
-+    static Current s_current = { EGL_SUCCESS, EGL_OPENGL_ES_API, EGL_NO_DISPLAY, EGL_NO_SURFACE, EGL_NO_SURFACE };
-+    Current *current = &s_current;
++    static Current current = { EGL_SUCCESS, EGL_OPENGL_ES_API, EGL_NO_DISPLAY, EGL_NO_SURFACE, EGL_NO_SURFACE };
++    return &current;
 +#endif
+ }
  
-     // ANGLE issue 488: when the dll is loaded after thread initialization,
-     // thread local storage (current) might not exist yet.
+ void setCurrentError(EGLint error)
 diff --git a/src/3rdparty/angle/src/libGLESv2/main.cpp b/src/3rdparty/angle/src/libGLESv2/main.cpp
-index 50e2593..6b459d3 100644
+index 4444d1a..1c577bc 100644
 --- a/src/3rdparty/angle/src/libGLESv2/main.cpp
 +++ b/src/3rdparty/angle/src/libGLESv2/main.cpp
-@@ -89,7 +89,13 @@ namespace gl
+@@ -46,6 +46,8 @@ void DeallocateCurrent()
+ 
+ }
+ 
++#ifndef QT_OPENGL_ES_2_ANGLE_STATIC
++
+ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved)
+ {
+     switch (reason)
+@@ -82,16 +84,24 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
+     return TRUE;
+ }
+ 
++#endif // !QT_OPENGL_ES_2_ANGLE_STATIC
++
+ namespace gl
+ {
  
  Current *GetCurrentData()
  {
 +#ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-     Current *current = (Current*)TlsGetValue(currentTLS);
+     Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
+ 
+     // ANGLE issue 488: when the dll is loaded after thread initialization,
+     // thread local storage (current) might not exist yet.
+     return (current ? current : AllocateCurrent());
 +#else
 +    // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
-+    static Current s_current = { 0, 0 };
-+    Current *current = &s_current;
++    static Current current = { 0, 0 };
++    return &current;
 +#endif
+ }
  
-     // ANGLE issue 488: when the dll is loaded after thread initialization,
-     // thread local storage (current) might not exist yet.
+ void makeCurrent(Context *context, egl::Display *display, egl::Surface *surface)
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0005-Fix-build-when-SSE2-is-not-available.patch b/src/angle/patches/0005-Fix-build-when-SSE2-is-not-available.patch
index 475ec55b0e..78c3e0fbe8 100644
--- a/src/angle/patches/0005-Fix-build-when-SSE2-is-not-available.patch
+++ b/src/angle/patches/0005-Fix-build-when-SSE2-is-not-available.patch
@@ -1,7 +1,7 @@
-From cebc37237a74a130dffaefad0a10da17abc42981 Mon Sep 17 00:00:00 2001
+From df225c023963f37737b7e2d020c8f89a5d5f878e Mon Sep 17 00:00:00 2001
 From: Andy Shaw <andy.shaw@digia.com>
-Date: Tue, 18 Feb 2014 09:59:17 +0200
-Subject: [PATCH] Fix build when SSE2 is not available.
+Date: Tue, 16 Sep 2014 23:49:50 +0300
+Subject: [PATCH 05/16] Fix build when SSE2 is not available.
 
 Although SSE2 support is detected at runtime it still may not be
 available at build time, so we have to ensure it only uses SSE2
@@ -9,23 +9,23 @@ when it is available at build time too.
 
 Change-Id: I86c45a6466ab4cec79aa0f62b0d5230a78ad825a
 ---
- src/3rdparty/angle/src/libGLESv2/mathutil.h               | 2 ++
- src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp | 6 +++++-
- 2 files changed, 7 insertions(+), 1 deletion(-)
+ src/3rdparty/angle/src/common/mathutil.h                    | 2 ++
+ src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp | 8 ++++++++
+ 2 files changed, 10 insertions(+)
 
-diff --git a/src/3rdparty/angle/src/libGLESv2/mathutil.h b/src/3rdparty/angle/src/libGLESv2/mathutil.h
-index f902131..6474b66 100644
---- a/src/3rdparty/angle/src/libGLESv2/mathutil.h
-+++ b/src/3rdparty/angle/src/libGLESv2/mathutil.h
-@@ -92,6 +92,7 @@ inline bool supportsSSE2()
+diff --git a/src/3rdparty/angle/src/common/mathutil.h b/src/3rdparty/angle/src/common/mathutil.h
+index ffcb908..52f2bc1 100644
+--- a/src/3rdparty/angle/src/common/mathutil.h
++++ b/src/3rdparty/angle/src/common/mathutil.h
+@@ -118,6 +118,7 @@ inline bool supportsSSE2()
          return supports;
      }
  
 +#if defined(_M_IX86) || defined(_M_AMD64) // ARM doesn't provide __cpuid()
      int info[4];
      __cpuid(info, 0);
-     
-@@ -101,6 +102,7 @@ inline bool supportsSSE2()
+ 
+@@ -127,6 +128,7 @@ inline bool supportsSSE2()
  
          supports = (info[3] >> 26) & 1;
      }
@@ -33,45 +33,52 @@ index f902131..6474b66 100644
  
      checked = true;
  
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp
-index 8511946..cd12d8c 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d9/Image9.cpp
-@@ -373,11 +373,13 @@ void Image9::loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei heigh
-     switch (mInternalFormat)
-     {
-       case GL_ALPHA8_EXT:
-+#if defined(__SSE2__)
-         if (gl::supportsSSE2())
-         {
-             loadAlphaDataToBGRASSE2(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-         }
-         else
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp
+index cc20d94..f777b30 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/loadimageSSE2.cpp
+@@ -10,6 +10,10 @@
+ 
+ #include "libGLESv2/renderer/loadimage.h"
+ 
++#if !defined(__SSE2__) && (defined(_M_X64) || _M_IX86_FP == 2)
++#define __SSE2__
 +#endif
-         {
-             loadAlphaDataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-         }
-@@ -413,11 +415,13 @@ void Image9::loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei heigh
-         loadRGB565DataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
-         break;
-       case GL_RGBA8_OES:
-+#if defined(__SSE2__)
-         if (gl::supportsSSE2())
-         {
-             loadRGBAUByteDataToBGRASSE2(width, height, inputPitch, input, locked.Pitch, locked.pBits);
++
+ namespace rx
+ {
+ 
+@@ -17,6 +21,7 @@ void LoadA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+                         const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                         uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+ {
++#ifdef __SSE2__
+     __m128i zeroWide = _mm_setzero_si128();
+ 
+     for (size_t z = 0; z < depth; z++)
+@@ -54,12 +59,14 @@ void LoadA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+             }
          }
-         else
+     }
 +#endif
-         {
-             loadRGBAUByteDataToBGRA(width, height, inputPitch, input, locked.Pitch, locked.pBits);
+ }
+ 
+ void LoadRGBA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+                            const uint8_t *input, size_t inputRowPitch, size_t inputDepthPitch,
+                            uint8_t *output, size_t outputRowPitch, size_t outputDepthPitch)
+ {
++#ifdef __SSE2__
+     __m128i brMask = _mm_set1_epi32(0x00ff00ff);
+ 
+     for (size_t z = 0; z < depth; z++)
+@@ -99,6 +106,7 @@ void LoadRGBA8ToBGRA8_SSE2(size_t width, size_t height, size_t depth,
+             }
          }
-@@ -729,4 +733,4 @@ void Image9::copy(GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width,
-     mDirty = true;
+     }
++#endif
  }
  
--}
-\ No newline at end of file
-+}
+ }
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0006-Fix-compilation-of-libGLESv2-with-older-MinGW-w64-he.patch b/src/angle/patches/0006-Fix-compilation-of-libGLESv2-with-older-MinGW-w64-he.patch
index cf31245b95..e60bebd233 100644
--- a/src/angle/patches/0006-Fix-compilation-of-libGLESv2-with-older-MinGW-w64-he.patch
+++ b/src/angle/patches/0006-Fix-compilation-of-libGLESv2-with-older-MinGW-w64-he.patch
@@ -1,7 +1,7 @@
-From 68ba96d224a84389567f506661a78c32b307e84d Mon Sep 17 00:00:00 2001
+From 2a8568e6f44731df96f6567ffcc59a65ad2b3f29 Mon Sep 17 00:00:00 2001
 From: Kai Koehne <kai.koehne@digia.com>
-Date: Tue, 18 Feb 2014 10:29:14 +0200
-Subject: [PATCH] Fix compilation of libGLESv2 with older MinGW-w64
+Date: Tue, 16 Sep 2014 23:55:25 +0300
+Subject: [PATCH 06/16] Fix compilation of libGLESv2 with older MinGW-w64
  headers
 
 Fix compilation of libGLESv2 for mingw-headers predating MinGW-w64
@@ -15,20 +15,18 @@ MinGW-builds gcc 4.7.2-rev11) will unfortunately remain broken.
 
 Change-Id: I31272a1a991c4fc0f1611f8fb7510be51d6bb925
 ---
- .../angle/src/libGLESv2/renderer/Renderer.cpp         | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
+ .../angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp     | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
 
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-index 3407353..e74120d 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-@@ -24,6 +24,25 @@
- #define D3DERR_OUTOFVIDEOMEMORY MAKE_HRESULT(1, 0x876, 380)
- #endif
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+index acbd852..eb0dfa5 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+@@ -10,6 +10,21 @@
  
-+#ifdef __MINGW32__
-+
-+#ifndef D3DCOMPILER_DLL
+ #include "common/utilities.h"
+ 
++#if defined(__MINGW32__) && !defined(D3DCOMPILER_DLL)
 +
 +// Add define + typedefs for older MinGW-w64 headers (pre 5783)
 +
@@ -41,13 +39,11 @@ index 3407353..e74120d 100644
 +        const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
 +        const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **error_messages);
 +
-+#endif // D3DCOMPILER_DLL
-+
-+#endif // __MINGW32__
++#endif // __MINGW32__ && !D3DCOMPILER_DLL
 +
  namespace rx
  {
  
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0007-Fix-ANGLE-build-with-Microsoft-Visual-Studio-14-CTP.patch b/src/angle/patches/0007-Fix-ANGLE-build-with-Microsoft-Visual-Studio-14-CTP.patch
new file mode 100644
index 0000000000..c796ebc95e
--- /dev/null
+++ b/src/angle/patches/0007-Fix-ANGLE-build-with-Microsoft-Visual-Studio-14-CTP.patch
@@ -0,0 +1,28 @@
+From 76152feea8265f40fec8c6e53f976dbd82fb6c80 Mon Sep 17 00:00:00 2001
+From: Thiago Macieira <thiago.macieira@intel.com>
+Date: Tue, 16 Sep 2014 23:56:43 +0300
+Subject: [PATCH 07/16] Fix ANGLE build with Microsoft Visual Studio "14" CTP
+
+This version has a few new C99 support added, including snprintf.
+
+Change-Id: I5776456fd94254a64f08791f59bc775cb24c9b7f
+---
+ src/3rdparty/angle/src/common/angleutils.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/3rdparty/angle/src/common/angleutils.h b/src/3rdparty/angle/src/common/angleutils.h
+index 50a4132..ddbbd5f 100644
+--- a/src/3rdparty/angle/src/common/angleutils.h
++++ b/src/3rdparty/angle/src/common/angleutils.h
+@@ -135,7 +135,7 @@ inline std::string Str(int i)
+ std::string FormatString(const char *fmt, va_list vararg);
+ std::string FormatString(const char *fmt, ...);
+ 
+-#if defined(_MSC_VER)
++#if defined(_MSC_VER) && _MSC_VER < 1900
+ #define snprintf _snprintf
+ #endif
+ 
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0007-Make-DX9-DX11-mutually-exclusive.patch b/src/angle/patches/0007-Make-DX9-DX11-mutually-exclusive.patch
deleted file mode 100644
index 25a2f12847..0000000000
--- a/src/angle/patches/0007-Make-DX9-DX11-mutually-exclusive.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From e1b26c6669cafb5c1298d6e5476c24686fccf1bd Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Thu, 20 Feb 2014 16:46:15 +0200
-Subject: [PATCH] Make DX9/DX11 support configurable
-
-ANGLE supports selecting the renderer on creation, choosing between
-D3D11 and D3D9 backends. This patch improves upon this by enabling the
-D3D backend(s) at compile time. This can make the binary size smaller
-(no extra render is built) and ensures compatibility with Windows Runtime
-when building only the D3D11 renderer.
-
-Change-Id: Id9473e0e631721083fe4026d475e37603a144c37
----
- src/3rdparty/angle/src/libEGL/Display.cpp             |  4 +++-
- src/3rdparty/angle/src/libGLESv2/Texture.cpp          |  6 +++++-
- src/3rdparty/angle/src/libGLESv2/precompiled.h        | 10 +++++++---
- .../angle/src/libGLESv2/renderer/Renderer.cpp         | 19 +++++++++++++------
- 4 files changed, 28 insertions(+), 11 deletions(-)
-
-diff --git a/src/3rdparty/angle/src/libEGL/Display.cpp b/src/3rdparty/angle/src/libEGL/Display.cpp
-index 13ef701..a7f5f5a 100644
---- a/src/3rdparty/angle/src/libEGL/Display.cpp
-+++ b/src/3rdparty/angle/src/libEGL/Display.cpp
-@@ -471,7 +471,6 @@ bool Display::hasExistingWindowSurface(HWND window)
- 
- void Display::initExtensionString()
- {
--    HMODULE swiftShader = GetModuleHandle(TEXT("swiftshader_d3d9.dll"));
-     bool shareHandleSupported = mRenderer->getShareHandleSupport();
- 
-     mExtensionString = "";
-@@ -487,10 +486,13 @@ void Display::initExtensionString()
- 
-     mExtensionString += "EGL_ANGLE_query_surface_pointer ";
- 
-+#if defined(ANGLE_ENABLE_D3D9)
-+    HMODULE swiftShader = GetModuleHandle(TEXT("swiftshader_d3d9.dll"));
-     if (swiftShader)
-     {
-         mExtensionString += "EGL_ANGLE_software_display ";
-     }
-+#endif
- 
-     if (shareHandleSupported)
-     {
-diff --git a/src/3rdparty/angle/src/libGLESv2/Texture.cpp b/src/3rdparty/angle/src/libGLESv2/Texture.cpp
-index 3deecaf..3257d05 100644
---- a/src/3rdparty/angle/src/libGLESv2/Texture.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/Texture.cpp
-@@ -14,7 +14,11 @@
- #include "libGLESv2/main.h"
- #include "libGLESv2/mathutil.h"
- #include "libGLESv2/utilities.h"
--#include "libGLESv2/renderer/d3d9/Blit.h"
-+#if defined(ANGLE_ENABLE_D3D9)
-+#  include "libGLESv2/renderer/d3d9/Blit.h"
-+#else
-+#  define D3DFMT_UNKNOWN DXGI_FORMAT_UNKNOWN
-+#endif
- #include "libGLESv2/Renderbuffer.h"
- #include "libGLESv2/renderer/Image.h"
- #include "libGLESv2/renderer/Renderer.h"
-diff --git a/src/3rdparty/angle/src/libGLESv2/precompiled.h b/src/3rdparty/angle/src/libGLESv2/precompiled.h
-index 58ad181..79490b1 100644
---- a/src/3rdparty/angle/src/libGLESv2/precompiled.h
-+++ b/src/3rdparty/angle/src/libGLESv2/precompiled.h
-@@ -32,9 +32,13 @@
- #include <unordered_map>
- #include <vector>
- 
--#include <d3d9.h>
--#include <d3d11.h>
--#include <dxgi.h>
-+#if defined(ANGLE_ENABLE_D3D9)
-+#  include <d3d9.h>
-+#endif
-+#if defined(ANGLE_ENABLE_D3D11)
-+#  include <d3d11.h>
-+#  include <dxgi.h>
-+#endif
- #include <d3dcompiler.h>
- 
- #ifdef _MSC_VER
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-index 86be93f..3407353 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-@@ -11,14 +11,17 @@
- #include "libGLESv2/main.h"
- #include "libGLESv2/Program.h"
- #include "libGLESv2/renderer/Renderer.h"
--#include "libGLESv2/renderer/d3d9/Renderer9.h"
--#include "libGLESv2/renderer/d3d11/Renderer11.h"
-+#if defined(ANGLE_ENABLE_D3D9)
-+#  include "libGLESv2/renderer/d3d9/Renderer9.h"
-+#endif
-+#if defined(ANGLE_ENABLE_D3D11)
-+#  include "libGLESv2/renderer/d3d11/Renderer11.h"
-+#endif
- #include "libGLESv2/utilities.h"
- #include "third_party/trace_event/trace_event.h"
- 
--#if !defined(ANGLE_ENABLE_D3D11)
--// Enables use of the Direct3D 11 API for a default display, when available
--#define ANGLE_ENABLE_D3D11 0
-+#ifndef D3DERR_OUTOFVIDEOMEMORY
-+#define D3DERR_OUTOFVIDEOMEMORY MAKE_HRESULT(1, 0x876, 380)
- #endif
- 
- namespace rx
-@@ -177,7 +180,8 @@ rx::Renderer *glCreateRenderer(egl::Display *display, HDC hDc, EGLNativeDisplayT
-     rx::Renderer *renderer = NULL;
-     EGLint status = EGL_BAD_ALLOC;
- 
--    if (ANGLE_ENABLE_D3D11 ||
-+#if defined(ANGLE_ENABLE_D3D11)
-+    if (displayId == EGL_DEFAULT_DISPLAY ||
-         displayId == EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ||
-         displayId == EGL_D3D11_ONLY_DISPLAY_ANGLE)
-     {
-@@ -200,7 +204,9 @@ rx::Renderer *glCreateRenderer(egl::Display *display, HDC hDc, EGLNativeDisplayT
-         // Failed to create a D3D11 renderer, try creating a D3D9 renderer
-         delete renderer;
-     }
-+#endif // ANGLE_ENABLE_D3D11
- 
-+#if defined(ANGLE_ENABLE_D3D9)
-     bool softwareDevice = (displayId == EGL_SOFTWARE_DISPLAY_ANGLE);
-     renderer = new rx::Renderer9(display, hDc, softwareDevice);
- 
-@@ -213,6 +219,7 @@ rx::Renderer *glCreateRenderer(egl::Display *display, HDC hDc, EGLNativeDisplayT
-     {
-         return renderer;
-     }
-+#endif // ANGLE_ENABLE_D3D9
- 
-     return NULL;
- }
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-of-k.patch b/src/angle/patches/0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-of-k.patch
deleted file mode 100644
index c7cfafc246..0000000000
--- a/src/angle/patches/0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-of-k.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 0fede57f6fc052942b910995fdfa4cd76a32f586 Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Tue, 18 Feb 2014 12:11:45 +0200
-Subject: [PATCH] ANGLE: Dynamically load D3D compiler from a list or the
- environment
-
-If the default compiler cannot be found, load it from a list of DLL names,
-including a non-versioned proxy DLL provided by Qt. On Desktop Windows,
-the default compiler can also be specified by an environment variable,
-QT_D3DCOMPILER_DLL.
-
-Change-Id: I0d7a8a8a36cc571836f8fa59ea14513b9b19c19b
----
- .../angle/src/libGLESv2/renderer/Renderer.cpp      | 34 ++++++++++++++++++++--
- 1 file changed, 32 insertions(+), 2 deletions(-)
-
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-index e74120d..94cbc0e 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-@@ -43,6 +43,10 @@ typedef HRESULT (WINAPI *pD3DCompile)(const void *data, SIZE_T data_size, const
- 
- #endif // __MINGW32__
- 
-+#ifndef QT_D3DCOMPILER_DLL
-+#define QT_D3DCOMPILER_DLL D3DCOMPILER_DLL
-+#endif
-+
- namespace rx
- {
- 
-@@ -77,10 +81,36 @@ bool Renderer::initializeCompiler()
-     }
- #endif  // ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES
- 
--    if (!mD3dCompilerModule)
-+    // Load the compiler DLL specified by the environment, or default to QT_D3DCOMPILER_DLL
-+#if !defined(ANGLE_OS_WINRT)
-+    const wchar_t *defaultCompiler = _wgetenv(L"QT_D3DCOMPILER_DLL");
-+    if (!defaultCompiler)
-+        defaultCompiler = QT_D3DCOMPILER_DLL;
-+#else // !ANGLE_OS_WINRT
-+#  ifdef _DEBUG
-+    const wchar_t *defaultCompiler = L"d3dcompiler_qtd.dll";
-+#  else
-+    const wchar_t *defaultCompiler = L"d3dcompiler_qt.dll";
-+#  endif
-+#endif // ANGLE_OS_WINRT
-+
-+    const wchar_t *compilerDlls[] = {
-+        defaultCompiler,
-+        L"d3dcompiler_47.dll",
-+        L"d3dcompiler_46.dll",
-+        L"d3dcompiler_45.dll",
-+        L"d3dcompiler_44.dll",
-+        L"d3dcompiler_43.dll",
-+        0
-+    };
-+
-+    // Load the first available known compiler DLL
-+    for (int i = 0; compilerDlls[i]; ++i)
-     {
-         // Load the version of the D3DCompiler DLL associated with the Direct3D version ANGLE was built with.
--        mD3dCompilerModule = LoadLibrary(D3DCOMPILER_DLL);
-+        mD3dCompilerModule = LoadLibrary(compilerDlls[i]);
-+        if (mD3dCompilerModule)
-+            break;
-     }
- 
-     if (!mD3dCompilerModule)
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-or-t.patch b/src/angle/patches/0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-or-t.patch
new file mode 100644
index 0000000000..7c821580d0
--- /dev/null
+++ b/src/angle/patches/0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-or-t.patch
@@ -0,0 +1,65 @@
+From 4f6dd1f7cdce3340723cc23e0aea27b156fa3497 Mon Sep 17 00:00:00 2001
+From: Andrew Knight <andrew.knight@digia.com>
+Date: Tue, 16 Sep 2014 23:59:40 +0300
+Subject: [PATCH 08/16] ANGLE: Dynamically load D3D compiler from a list or the
+ environment
+
+If the default compiler cannot be found, load it from a list of DLL names,
+including a non-versioned proxy DLL provided by Qt. On Desktop Windows,
+the default compiler can also be specified by an environment variable,
+QT_D3DCOMPILER_DLL.
+
+Change-Id: I0d7a8a8a36cc571836f8fa59ea14513b9b19c19b
+---
+ .../src/libGLESv2/renderer/d3d/HLSLCompiler.cpp    | 27 +++++++++++++++++++---
+ 1 file changed, 24 insertions(+), 3 deletions(-)
+
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+index eb0dfa5..5715d5f 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+@@ -25,6 +25,10 @@ typedef HRESULT (WINAPI *pD3DCompile)(const void *data, SIZE_T data_size, const
+ 
+ #endif // __MINGW32__ && !D3DCOMPILER_DLL
+ 
++#ifndef QT_D3DCOMPILER_DLL
++#define QT_D3DCOMPILER_DLL D3DCOMPILER_DLL
++#endif
++
+ namespace rx
+ {
+ 
+@@ -59,10 +63,27 @@ bool HLSLCompiler::initialize()
+     }
+ #endif  // ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES
+ 
+-    if (!mD3DCompilerModule)
++    // Load the compiler DLL specified by the environment, or default to QT_D3DCOMPILER_DLL
++    const wchar_t *defaultCompiler = _wgetenv(L"QT_D3DCOMPILER_DLL");
++    if (!defaultCompiler)
++        defaultCompiler = QT_D3DCOMPILER_DLL;
++
++    const wchar_t *compilerDlls[] = {
++        defaultCompiler,
++        L"d3dcompiler_47.dll",
++        L"d3dcompiler_46.dll",
++        L"d3dcompiler_45.dll",
++        L"d3dcompiler_44.dll",
++        L"d3dcompiler_43.dll",
++        0
++    };
++
++    // Load the first available known compiler DLL
++    for (int i = 0; compilerDlls[i]; ++i)
+     {
+-        // Load the version of the D3DCompiler DLL associated with the Direct3D version ANGLE was built with.
+-        mD3DCompilerModule = LoadLibrary(D3DCOMPILER_DLL);
++        mD3DCompilerModule = LoadLibrary(compilerDlls[i]);
++        if (mD3DCompilerModule)
++            break;
+     }
+ 
+     if (!mD3DCompilerModule)
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0009-ANGLE-Support-WinRT.patch b/src/angle/patches/0009-ANGLE-Support-WinRT.patch
index 92909d37d8..f4bae46b63 100644
--- a/src/angle/patches/0009-ANGLE-Support-WinRT.patch
+++ b/src/angle/patches/0009-ANGLE-Support-WinRT.patch
@@ -1,7 +1,7 @@
-From 46b8b123ada1787c68525cd07dcdbfdbc003bcc5 Mon Sep 17 00:00:00 2001
+From 7ff7dd46f54e23ae309887366bf477de9c33005b Mon Sep 17 00:00:00 2001
 From: Andrew Knight <andrew.knight@digia.com>
-Date: Thu, 20 Feb 2014 16:49:13 +0200
-Subject: [PATCH] ANGLE: Support WinRT
+Date: Wed, 17 Sep 2014 00:58:29 +0300
+Subject: [PATCH 09/16] ANGLE: Support WinRT
 
 This enables EGL for WinRT's native types, and adjusts some codepaths
 to accommodate differences between desktop Windows and WinRT.
@@ -15,36 +15,32 @@ to accommodate differences between desktop Windows and WinRT.
 Change-Id: Ia90377e700d335a1c569c2145008dd4b0dfd84d3
 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
 ---
- src/3rdparty/angle/include/EGL/eglplatform.h       | 10 ++-
- .../angle/src/compiler/translator/osinclude.h      | 20 +++---
- .../src/compiler/translator/ossource_posix.cpp     |  8 +++
- .../angle/src/compiler/translator/ossource_win.cpp |  8 +++
- .../src/compiler/translator/ossource_winrt.cpp     | 75 ++++++++++++++++++++++
- src/3rdparty/angle/src/libEGL/Display.cpp          | 11 ++--
- src/3rdparty/angle/src/libEGL/Display.h            |  7 +-
- src/3rdparty/angle/src/libEGL/Surface.cpp          | 42 +++++++++++-
- src/3rdparty/angle/src/libEGL/Surface.h            |  6 +-
- src/3rdparty/angle/src/libEGL/libEGL.cpp           |  4 +-
- src/3rdparty/angle/src/libEGL/main.cpp             | 29 ++++++++-
- src/3rdparty/angle/src/libGLESv2/Context.cpp       |  1 +
- src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp     |  1 +
- src/3rdparty/angle/src/libGLESv2/main.cpp          | 27 ++++++++
- src/3rdparty/angle/src/libGLESv2/main.h            |  2 +-
- src/3rdparty/angle/src/libGLESv2/precompiled.h     | 45 ++++++++++++-
- .../angle/src/libGLESv2/renderer/Renderer.cpp      | 15 +++--
- .../angle/src/libGLESv2/renderer/Renderer.h        |  3 +-
- .../angle/src/libGLESv2/renderer/SwapChain.h       |  5 +-
- .../src/libGLESv2/renderer/d3d11/Renderer11.cpp    | 13 +++-
- .../src/libGLESv2/renderer/d3d11/Renderer11.h      |  5 +-
- .../src/libGLESv2/renderer/d3d11/SwapChain11.cpp   | 37 +++++++++--
- .../src/libGLESv2/renderer/d3d11/SwapChain11.h     |  2 +-
- .../libGLESv2/renderer/d3d11/shaders/Clear11.hlsl  |  4 ++
- src/3rdparty/angle/src/libGLESv2/utilities.cpp     | 48 ++++++++++++++
- 25 files changed, 378 insertions(+), 50 deletions(-)
- create mode 100644 src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp
+ src/3rdparty/angle/include/EGL/eglplatform.h       |  10 +-
+ src/3rdparty/angle/src/common/platform.h           |   3 +
+ src/3rdparty/angle/src/common/tls.cpp              |  37 ++++-
+ src/3rdparty/angle/src/common/tls.h                |   6 +-
+ src/3rdparty/angle/src/common/utilities.cpp        |  51 +++++-
+ src/3rdparty/angle/src/libEGL/Display.cpp          |  13 +-
+ src/3rdparty/angle/src/libEGL/Display.h            |   6 +-
+ src/3rdparty/angle/src/libEGL/Surface.cpp          | 185 ++++++++++++++++++++-
+ src/3rdparty/angle/src/libEGL/Surface.h            |  37 ++++-
+ src/3rdparty/angle/src/libEGL/libEGL.cpp           |   8 +-
+ src/3rdparty/angle/src/libEGL/main.cpp             |  21 +++
+ src/3rdparty/angle/src/libGLESv2/main.cpp          |  20 +++
+ src/3rdparty/angle/src/libGLESv2/main.h            |   4 +
+ .../angle/src/libGLESv2/renderer/Renderer.h        |   2 +-
+ .../angle/src/libGLESv2/renderer/SwapChain.h       |  15 +-
+ .../src/libGLESv2/renderer/d3d/HLSLCompiler.cpp    |  11 +-
+ .../libGLESv2/renderer/d3d/d3d11/Renderer11.cpp    |  13 +-
+ .../src/libGLESv2/renderer/d3d/d3d11/Renderer11.h  |   4 +-
+ .../libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp   |  73 ++++++--
+ .../src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h |   6 +-
+ .../src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp |   2 +-
+ .../src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h   |   2 +-
+ 22 files changed, 481 insertions(+), 48 deletions(-)
 
 diff --git a/src/3rdparty/angle/include/EGL/eglplatform.h b/src/3rdparty/angle/include/EGL/eglplatform.h
-index 34283f2..eb15ae5 100644
+index 3ab8844..ea9f577 100644
 --- a/src/3rdparty/angle/include/EGL/eglplatform.h
 +++ b/src/3rdparty/angle/include/EGL/eglplatform.h
 @@ -67,7 +67,15 @@
@@ -52,11 +48,11 @@ index 34283f2..eb15ae5 100644
   */
  
 -#if defined(_WIN32) || defined(__VC32__) && !defined(__CYGWIN__) && !defined(__SCITECH_SNAP__) /* Win32 and WinCE */
-+#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP) /* Windows Runtime */
++#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_PC_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP) /* Windows Runtime */
 +
 +struct IUnknown;
 +
-+typedef int       EGLNativeDisplayType;
++typedef IUnknown *EGLNativeDisplayType;
 +typedef void     *EGLNativePixmapType;
 +typedef IUnknown *EGLNativeWindowType;
 +
@@ -64,213 +60,213 @@ index 34283f2..eb15ae5 100644
  #ifndef WIN32_LEAN_AND_MEAN
  #define WIN32_LEAN_AND_MEAN 1
  #endif
-diff --git a/src/3rdparty/angle/src/compiler/translator/osinclude.h b/src/3rdparty/angle/src/compiler/translator/osinclude.h
-index c3063d6..cccfa63 100644
---- a/src/3rdparty/angle/src/compiler/translator/osinclude.h
-+++ b/src/3rdparty/angle/src/compiler/translator/osinclude.h
-@@ -13,7 +13,11 @@
- //
+diff --git a/src/3rdparty/angle/src/common/platform.h b/src/3rdparty/angle/src/common/platform.h
+index d07297d..387ba41 100644
+--- a/src/3rdparty/angle/src/common/platform.h
++++ b/src/3rdparty/angle/src/common/platform.h
+@@ -11,6 +11,9 @@
  
  #if defined(_WIN32) || defined(_WIN64)
-+#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
-+#define ANGLE_OS_WINRT
-+#else
- #define ANGLE_OS_WIN
+ #   define ANGLE_PLATFORM_WINDOWS 1
++#   if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_PC_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
++#      define ANGLE_PLATFORM_WINRT 1
++#   endif
+ #elif defined(__APPLE__)
+ #   define ANGLE_PLATFORM_APPLE 1
+ #   define ANGLE_PLATFORM_POSIX 1
+diff --git a/src/3rdparty/angle/src/common/tls.cpp b/src/3rdparty/angle/src/common/tls.cpp
+index 6b78219..c46fab5 100644
+--- a/src/3rdparty/angle/src/common/tls.cpp
++++ b/src/3rdparty/angle/src/common/tls.cpp
+@@ -10,11 +10,28 @@
+ 
+ #include <assert.h>
+ 
++#if defined(ANGLE_PLATFORM_WINRT)
++#include <vector>
++std::vector<void *> *tls = nullptr;
++std::vector<TLSIndex> *freeIndices = nullptr;
 +#endif
- #elif defined(__APPLE__) || defined(__linux__) || \
-       defined(__FreeBSD__) || defined(__OpenBSD__) || \
-       defined(__NetBSD__) || defined(__DragonFly__) || \
-@@ -25,7 +29,7 @@
- #error Unsupported platform.
- #endif
- 
--#if defined(ANGLE_OS_WIN)
-+#if defined(ANGLE_OS_WIN) || defined(ANGLE_OS_WINRT)
- #define STRICT
- #define VC_EXTRALEAN 1
- #include <windows.h>
-@@ -44,23 +48,17 @@
- #if defined(ANGLE_OS_WIN)
- typedef DWORD OS_TLSIndex;
- #define OS_INVALID_TLS_INDEX (TLS_OUT_OF_INDEXES)
-+#elif defined(ANGLE_OS_WINRT)
-+typedef size_t OS_TLSIndex;
-+#define OS_INVALID_TLS_INDEX ((DWORD)0xFFFFFF)
- #elif defined(ANGLE_OS_POSIX)
- typedef pthread_key_t OS_TLSIndex;
- #define OS_INVALID_TLS_INDEX (static_cast<OS_TLSIndex>(-1))
- #endif  // ANGLE_OS_WIN
- 
- OS_TLSIndex OS_AllocTLSIndex();
-+void *OS_GetTLSValue(OS_TLSIndex nIndex);
- bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue);
- bool OS_FreeTLSIndex(OS_TLSIndex nIndex);
- 
--inline void* OS_GetTLSValue(OS_TLSIndex nIndex)
--{
--    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
--#if defined(ANGLE_OS_WIN)
--    return TlsGetValue(nIndex);
--#elif defined(ANGLE_OS_POSIX)
--    return pthread_getspecific(nIndex);
--#endif  // ANGLE_OS_WIN
--}
--
- #endif // __OSINCLUDE_H
-diff --git a/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp b/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp
-index 90a3757..d4bba4c 100644
---- a/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp
-+++ b/src/3rdparty/angle/src/compiler/translator/ossource_posix.cpp
-@@ -33,6 +33,14 @@ OS_TLSIndex OS_AllocTLSIndex()
- }
- 
- 
-+void *OS_GetTLSValue(OS_TLSIndex nIndex)
-+{
-+    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
-+
-+    return pthread_getspecific(nIndex);
-+}
-+
 +
- bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue)
+ TLSIndex CreateTLSIndex()
  {
-     if (nIndex == OS_INVALID_TLS_INDEX) {
-diff --git a/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp b/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp
-index 2cc5871..abd8bc7 100644
---- a/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp
-+++ b/src/3rdparty/angle/src/compiler/translator/ossource_win.cpp
-@@ -29,6 +29,14 @@ OS_TLSIndex OS_AllocTLSIndex()
- }
- 
+     TLSIndex index;
  
-+void *OS_GetTLSValue(OS_TLSIndex nIndex)
-+{
-+    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
-+
-+    return TlsGetValue(nIndex);
-+}
-+
-+
- bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue)
- {
- 	if (nIndex == OS_INVALID_TLS_INDEX) {
-diff --git a/src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp b/src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp
-new file mode 100644
-index 0000000..bb061ca
---- /dev/null
-+++ b/src/3rdparty/angle/src/compiler/translator/ossource_winrt.cpp
-@@ -0,0 +1,75 @@
-+//
-+// Copyright (c) 2002-2010 The ANGLE Project Authors. All rights reserved.
-+// Use of this source code is governed by a BSD-style license that can be
-+// found in the LICENSE file.
-+//
-+
-+#include "compiler/translator/osinclude.h"
-+//
-+// This file contains contains Windows Runtime specific functions
-+//
-+
-+#if !defined(ANGLE_OS_WINRT)
-+#error Trying to build a WinRT specific file in a non-WinRT build.
-+#endif
-+
-+#include <vector>
-+
-+
-+//
-+// Thread Local Storage Operations
-+//
-+__declspec(thread) std::vector<void *> *tls = nullptr;
-+__declspec(thread) std::vector<OS_TLSIndex> *freeIndices = nullptr;
-+
-+OS_TLSIndex OS_AllocTLSIndex()
-+{
+-#ifdef ANGLE_PLATFORM_WINDOWS
++#if defined(ANGLE_PLATFORM_WINRT)
 +    if (!tls)
-+        tls = new std::vector<void*>;
-+
++        tls = new std::vector<void *>;
 +    if (freeIndices && !freeIndices->empty()) {
-+        OS_TLSIndex index = freeIndices->back();
++        index = freeIndices->back();
 +        freeIndices->pop_back();
 +        return index;
 +    } else {
 +        tls->push_back(nullptr);
 +        return tls->size() - 1;
 +    }
-+}
-+
-+
-+void *OS_GetTLSValue(OS_TLSIndex nIndex)
-+{
-+    ASSERT(nIndex != OS_INVALID_TLS_INDEX);
-+    ASSERT(tls);
++#elif defined(ANGLE_PLATFORM_WINDOWS)
+     index = TlsAlloc();
+ #elif defined(ANGLE_PLATFORM_POSIX)
+     // Create global pool key
+@@ -36,7 +53,12 @@ bool DestroyTLSIndex(TLSIndex index)
+         return false;
+     }
+ 
+-#ifdef ANGLE_PLATFORM_WINDOWS
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (!freeIndices)
++        freeIndices = new std::vector<TLSIndex>;
++    freeIndices->push_back(index);
++    return true;
++#elif ANGLE_PLATFORM_WINDOWS
+     return (TlsFree(index) == TRUE);
+ #elif defined(ANGLE_PLATFORM_POSIX)
+     return (pthread_key_delete(index) == 0);
+@@ -51,7 +73,10 @@ bool SetTLSValue(TLSIndex index, void *value)
+         return false;
+     }
+ 
+-#ifdef ANGLE_PLATFORM_WINDOWS
++#if defined(ANGLE_PLATFORM_WINRT)
++    tls->at(index) = value;
++    return true;
++#elif defined(ANGLE_PLATFORM_WINDOWS)
+     return (TlsSetValue(index, value) == TRUE);
+ #elif defined(ANGLE_PLATFORM_POSIX)
+     return (pthread_setspecific(index, value) == 0);
+@@ -60,13 +85,17 @@ bool SetTLSValue(TLSIndex index, void *value)
+ 
+ void *GetTLSValue(TLSIndex index)
+ {
++#if !defined(ANGLE_PLATFORM_WINRT) // Valid on WinRT, as Alloc handles the index creation
+     assert(index != TLS_INVALID_INDEX && "GetTLSValue(): Invalid TLS Index");
++#endif
+     if (index == TLS_INVALID_INDEX)
+     {
+         return NULL;
+     }
+ 
+-#ifdef ANGLE_PLATFORM_WINDOWS
++#if defined(ANGLE_PLATFORM_WINRT)
++    return tls->at(index);
++#elif defined(ANGLE_PLATFORM_WINDOWS)
+     return TlsGetValue(index);
+ #elif defined(ANGLE_PLATFORM_POSIX)
+     return pthread_getspecific(index);
+diff --git a/src/3rdparty/angle/src/common/tls.h b/src/3rdparty/angle/src/common/tls.h
+index 4b25fbc..c40ae1a 100644
+--- a/src/3rdparty/angle/src/common/tls.h
++++ b/src/3rdparty/angle/src/common/tls.h
+@@ -11,7 +11,11 @@
+ 
+ #include "common/platform.h"
+ 
+-#ifdef ANGLE_PLATFORM_WINDOWS
++#if defined(ANGLE_PLATFORM_WINRT)
++    typedef size_t TLSIndex;
++#   define TLS_OUT_OF_INDEXES (static_cast<TLSIndex>(-1))
++#   define TLS_INVALID_INDEX TLS_OUT_OF_INDEXES
++#elif defined(ANGLE_PLATFORM_WINDOWS)
+     typedef DWORD TLSIndex;
+ #   define TLS_INVALID_INDEX (TLS_OUT_OF_INDEXES)
+ #elif defined(ANGLE_PLATFORM_POSIX)
+diff --git a/src/3rdparty/angle/src/common/utilities.cpp b/src/3rdparty/angle/src/common/utilities.cpp
+index 405f119..4b8e325 100644
+--- a/src/3rdparty/angle/src/common/utilities.cpp
++++ b/src/3rdparty/angle/src/common/utilities.cpp
+@@ -9,6 +9,14 @@
+ #include "common/utilities.h"
+ #include "common/mathutil.h"
+ #include "common/platform.h"
++#if defined(ANGLE_PLATFORM_WINRT)
++#  include <locale>
++#  include <codecvt>
++#  include <wrl.h>
++#  include <windows.storage.h>
++   using namespace Microsoft::WRL;
++   using namespace ABI::Windows::Storage;
++#endif
+ 
+ #include <set>
+ 
+@@ -441,7 +449,48 @@ int VariableSortOrder(GLenum type)
+ 
+ std::string getTempPath()
+ {
+-#ifdef ANGLE_PLATFORM_WINDOWS
++#if defined(ANGLE_PLATFORM_WINRT)
++    static std::string path;
 +
-+    return tls->at(nIndex);
-+}
++    while (path.empty())
++    {
++        ComPtr<IApplicationDataStatics> factory;
++        Wrappers::HStringReference classId(RuntimeClass_Windows_Storage_ApplicationData);
++        HRESULT result = RoGetActivationFactory(classId.Get(), IID_PPV_ARGS(&factory));
++        if (FAILED(result))
++            break;
 +
++        ComPtr<IApplicationData> applicationData;
++        result = factory->get_Current(&applicationData);
++        if (FAILED(result))
++            break;
 +
-+bool OS_SetTLSValue(OS_TLSIndex nIndex, void *lpvValue)
-+{
-+    if (!tls || nIndex >= tls->size() || nIndex == OS_INVALID_TLS_INDEX) {
-+        ASSERT(0 && "OS_SetTLSValue(): Invalid TLS Index");
-+        return false;
-+    }
++        ComPtr<IStorageFolder> storageFolder;
++        result = applicationData->get_LocalFolder(&storageFolder);
++        if (FAILED(result))
++            break;
 +
-+    tls->at(nIndex) = lpvValue;
-+    return true;
-+}
++        ComPtr<IStorageItem> localFolder;
++        result = storageFolder.As(&localFolder);
++        if (FAILED(result))
++            break;
 +
++        HSTRING localFolderPath;
++        result = localFolder->get_Path(&localFolderPath);
++        if (FAILED(result))
++            break;
 +
-+bool OS_FreeTLSIndex(OS_TLSIndex nIndex)
-+{
-+    if (!tls || nIndex >= tls->size() || nIndex == OS_INVALID_TLS_INDEX) {
-+        ASSERT(0 && "OS_SetTLSValue(): Invalid TLS Index");
-+        return false;
++        std::wstring_convert< std::codecvt_utf8<wchar_t> > converter;
++        path = converter.to_bytes(WindowsGetStringRawBuffer(localFolderPath, NULL));
++        if (path.empty())
++        {
++            UNREACHABLE();
++            break;
++        }
 +    }
 +
-+    if (!freeIndices)
-+        freeIndices = new std::vector<OS_TLSIndex>;
-+
-+    freeIndices->push_back(nIndex);
-+
-+    return true;
-+}
++    return path;
++#elif defined(ANGLE_PLATFORM_WINDOWS)
+     char path[MAX_PATH];
+     DWORD pathLen = GetTempPathA(sizeof(path) / sizeof(path[0]), path);
+     if (pathLen == 0)
 diff --git a/src/3rdparty/angle/src/libEGL/Display.cpp b/src/3rdparty/angle/src/libEGL/Display.cpp
-index a7f5f5a..e75a4b6 100644
+index aaebdb3..ba09631 100644
 --- a/src/3rdparty/angle/src/libEGL/Display.cpp
 +++ b/src/3rdparty/angle/src/libEGL/Display.cpp
-@@ -1,3 +1,4 @@
-+#include "../libGLESv2/precompiled.h"
- //
- // Copyright (c) 2002-2013 The ANGLE Project Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style license that can be
-@@ -40,13 +41,13 @@ egl::Display *Display::getDisplay(EGLNativeDisplayType displayId)
- 
-     // FIXME: Check if displayId is a valid display device context
- 
--    egl::Display *display = new egl::Display(displayId, (HDC)displayId);
-+    egl::Display *display = new egl::Display(displayId);
- 
-     displays[displayId] = display;
-     return display;
+@@ -56,6 +56,10 @@ Display::Display(EGLNativeDisplayType displayId, EGLint displayType)
+       mRequestedDisplayType(displayType),
+       mRenderer(NULL)
+ {
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (mDisplayId)
++        mDisplayId->AddRef();
++#endif
  }
  
--Display::Display(EGLNativeDisplayType displayId, HDC deviceContext) : mDc(deviceContext)
-+Display::Display(EGLNativeDisplayType displayId)
- {
-     mDisplayId = displayId;
-     mRenderer = NULL;
-@@ -71,7 +72,7 @@ bool Display::initialize()
-         return true;
+ Display::~Display()
+@@ -68,6 +72,11 @@ Display::~Display()
+     {
+         displays->erase(iter);
      }
++
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (mDisplayId)
++        mDisplayId->Release();
++#endif
+ }
  
--    mRenderer = glCreateRenderer(this, mDc, mDisplayId);
-+    mRenderer = glCreateRenderer(this, mDisplayId);
-     
-     if (!mRenderer)
-     {
-@@ -186,7 +187,7 @@ bool Display::getConfigAttrib(EGLConfig config, EGLint attribute, EGLint *value)
+ bool Display::initialize()
+@@ -192,7 +201,7 @@ bool Display::getConfigAttrib(EGLConfig config, EGLint attribute, EGLint *value)
  
  
  
@@ -279,7 +275,7 @@ index a7f5f5a..e75a4b6 100644
  {
      const Config *configuration = mConfigSet.get(config);
      EGLint postSubBufferSupported = EGL_FALSE;
-@@ -456,7 +457,7 @@ bool Display::isValidSurface(egl::Surface *surface)
+@@ -493,7 +502,7 @@ bool Display::isValidSurface(egl::Surface *surface)
      return mSurfaceSet.find(surface) != mSurfaceSet.end();
  }
  
@@ -289,19 +285,19 @@ index a7f5f5a..e75a4b6 100644
      for (SurfaceSet::iterator surface = mSurfaceSet.begin(); surface != mSurfaceSet.end(); surface++)
      {
 diff --git a/src/3rdparty/angle/src/libEGL/Display.h b/src/3rdparty/angle/src/libEGL/Display.h
-index c816e4e..cd07bb3 100644
+index 250878f..73ba767 100644
 --- a/src/3rdparty/angle/src/libEGL/Display.h
 +++ b/src/3rdparty/angle/src/libEGL/Display.h
-@@ -38,7 +38,7 @@ class Display
+@@ -43,7 +43,7 @@ class Display
      bool getConfigs(EGLConfig *configs, const EGLint *attribList, EGLint configSize, EGLint *numConfig);
      bool getConfigAttrib(EGLConfig config, EGLint attribute, EGLint *value);
  
 -    EGLSurface createWindowSurface(HWND window, EGLConfig config, const EGLint *attribList);
 +    EGLSurface createWindowSurface(EGLNativeWindowType window, EGLConfig config, const EGLint *attribList);
      EGLSurface createOffscreenSurface(EGLConfig config, HANDLE shareHandle, const EGLint *attribList);
-     EGLContext createContext(EGLConfig configHandle, const gl::Context *shareContext, bool notifyResets, bool robustAccess);
+     EGLContext createContext(EGLConfig configHandle, EGLint clientVersion, const gl::Context *shareContext, bool notifyResets, bool robustAccess);
  
-@@ -49,7 +49,7 @@ class Display
+@@ -54,7 +54,7 @@ class Display
      bool isValidConfig(EGLConfig config);
      bool isValidContext(gl::Context *context);
      bool isValidSurface(egl::Surface *surface);
@@ -310,72 +306,184 @@ index c816e4e..cd07bb3 100644
  
      rx::Renderer *getRenderer() { return mRenderer; };
  
-@@ -63,12 +63,11 @@ class Display
+@@ -65,6 +65,8 @@ class Display
+     const char *getExtensionString() const;
+     const char *getVendorString() const;
+ 
++    EGLNativeDisplayType getDisplayId() const { return mDisplayId; }
++
    private:
      DISALLOW_COPY_AND_ASSIGN(Display);
  
--    Display(EGLNativeDisplayType displayId, HDC deviceContext);
-+    Display(EGLNativeDisplayType displayId);
- 
-     bool restoreLostDevice();
- 
-     EGLNativeDisplayType mDisplayId;
--    const HDC mDc;
- 
-     bool mSoftwareDevice;
-     
 diff --git a/src/3rdparty/angle/src/libEGL/Surface.cpp b/src/3rdparty/angle/src/libEGL/Surface.cpp
-index 12f8dfd..3443355 100644
+index 13b0f20..fa79961 100644
 --- a/src/3rdparty/angle/src/libEGL/Surface.cpp
 +++ b/src/3rdparty/angle/src/libEGL/Surface.cpp
-@@ -1,3 +1,4 @@
-+#include "../libGLESv2/precompiled.h"
- //
- // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style license that can be
-@@ -22,10 +23,15 @@
+@@ -22,10 +22,20 @@
  #include "libEGL/main.h"
  #include "libEGL/Display.h"
  
-+#if defined(ANGLE_OS_WINRT)
-+#include <windows.foundation.h>
-+#include <windows.ui.core.h>
++#if defined(ANGLE_PLATFORM_WINRT)
++#  include "wrl.h"
++#  include "windows.graphics.display.h"
++#  include "windows.ui.core.h"
++using namespace ABI::Windows::Graphics::Display;
++using namespace ABI::Windows::Foundation;
++using namespace ABI::Windows::UI::Core;
++using namespace Microsoft::WRL;
 +#endif
 +
  namespace egl
  {
  
--Surface::Surface(Display *display, const Config *config, HWND window, EGLint postSubBufferSupported) 
-+Surface::Surface(Display *display, const Config *config, EGLNativeWindowType window, EGLint postSubBufferSupported)
+-Surface::Surface(Display *display, const Config *config, HWND window, EGLint fixedSize, EGLint width, EGLint height, EGLint postSubBufferSupported) 
++Surface::Surface(Display *display, const Config *config, EGLNativeWindowType window, EGLint fixedSize, EGLint width, EGLint height, EGLint postSubBufferSupported)
      : mDisplay(display), mConfig(config), mWindow(window), mPostSubBufferSupported(postSubBufferSupported)
  {
      mRenderer = mDisplay->getRenderer();
-@@ -98,6 +104,7 @@ bool Surface::resetSwapChain()
+@@ -43,6 +53,17 @@ Surface::Surface(Display *display, const Config *config, HWND window, EGLint fix
+     mHeight = height;
+     setSwapInterval(1);
+     mFixedSize = fixedSize;
++    mSwapFlags = rx::SWAP_NORMAL;
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (mWindow)
++        mWindow->AddRef();
++    mScaleFactor = 1.0;
++    mSizeToken.value = 0;
++    mDpiToken.value = 0;
++#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
++    mOrientationToken.value = 0;
++#   endif
++#endif
+ 
+     subclassWindow();
+ }
+@@ -64,16 +85,86 @@ Surface::Surface(Display *display, const Config *config, HANDLE shareHandle, EGL
+     setSwapInterval(1);
+     // This constructor is for offscreen surfaces, which are always fixed-size.
+     mFixedSize = EGL_TRUE;
++    mSwapFlags = rx::SWAP_NORMAL;
++#if defined(ANGLE_PLATFORM_WINRT)
++    mScaleFactor = 1.0;
++    mSizeToken.value = 0;
++    mDpiToken.value = 0;
++#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
++    mOrientationToken.value = 0;
++#   endif
++#endif
+ }
+ 
+ Surface::~Surface()
+ {
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (mSizeToken.value) {
++        ComPtr<ICoreWindow> coreWindow;
++        HRESULT hr = mWindow->QueryInterface(coreWindow.GetAddressOf());
++        ASSERT(SUCCEEDED(hr));
++
++        hr = coreWindow->remove_SizeChanged(mSizeToken);
++        ASSERT(SUCCEEDED(hr));
++    }
++    if (mDpiToken.value) {
++        ComPtr<IDisplayInformation> displayInformation;
++        HRESULT hr = mDisplay->getDisplayId()->QueryInterface(displayInformation.GetAddressOf());
++        ASSERT(SUCCEEDED(hr));
++
++        hr = displayInformation->remove_DpiChanged(mDpiToken);
++        ASSERT(SUCCEEDED(hr));
++    }
++#   if WINAPI_FAMILY == WINAPI_FAMILY_PHONE_APP
++    if (mOrientationToken.value) {
++        ComPtr<IDisplayInformation> displayInformation;
++        HRESULT hr = mDisplay->getDisplayId()->QueryInterface(displayInformation.GetAddressOf());
++        ASSERT(SUCCEEDED(hr));
++
++        hr = displayInformation->remove_OrientationChanged(mOrientationToken);
++        ASSERT(SUCCEEDED(hr));
++    }
++#   endif
++#endif
+     unsubclassWindow();
+     release();
+ }
+ 
+ bool Surface::initialize()
+ {
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (!mFixedSize) {
++        HRESULT hr;
++        ComPtr<IDisplayInformation> displayInformation;
++        hr = mDisplay->getDisplayId()->QueryInterface(displayInformation.GetAddressOf());
++        ASSERT(SUCCEEDED(hr));
++        onDpiChanged(displayInformation.Get(), 0);
++        hr = displayInformation->add_DpiChanged(Callback<ITypedEventHandler<DisplayInformation *, IInspectable *>>(this, &Surface::onDpiChanged).Get(),
++                                                &mDpiToken);
++        ASSERT(SUCCEEDED(hr));
++
++#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
++        onOrientationChanged(displayInformation.Get(), 0);
++        hr = displayInformation->add_OrientationChanged(Callback<ITypedEventHandler<DisplayInformation *, IInspectable *>>(this, &Surface::onOrientationChanged).Get(),
++                                                        &mOrientationToken);
++        ASSERT(SUCCEEDED(hr));
++#   endif
++
++        ComPtr<ICoreWindow> coreWindow;
++        hr = mWindow->QueryInterface(coreWindow.GetAddressOf());
++        ASSERT(SUCCEEDED(hr));
++
++        Rect rect;
++        hr = coreWindow->get_Bounds(&rect);
++        ASSERT(SUCCEEDED(hr));
++        mWidth = rect.Width * mScaleFactor;
++        mHeight = rect.Height * mScaleFactor;
++        hr = coreWindow->add_SizeChanged(Callback<ITypedEventHandler<CoreWindow *, WindowSizeChangedEventArgs *>>(this, &Surface::onSizeChanged).Get(),
++                                         &mSizeToken);
++        ASSERT(SUCCEEDED(hr));
++    }
++#endif
++
+     if (!resetSwapChain())
+       return false;
+ 
+@@ -90,6 +181,11 @@ void Surface::release()
+         mTexture->releaseTexImage();
+         mTexture = NULL;
+     }
++
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (mWindow)
++        mWindow->Release();
++#endif
+ }
  
-     if (mWindow)
+ bool Surface::resetSwapChain()
+@@ -99,6 +195,7 @@ bool Surface::resetSwapChain()
+     int width;
+     int height;
+ 
++#if !defined(ANGLE_PLATFORM_WINRT)
+     if (!mFixedSize)
      {
-+#if !defined(ANGLE_OS_WINRT)
          RECT windowRect;
-         if (!GetClientRect(getWindowHandle(), &windowRect))
-         {
-@@ -109,6 +116,16 @@ bool Surface::resetSwapChain()
- 
-         width = windowRect.right - windowRect.left;
+@@ -114,6 +211,7 @@ bool Surface::resetSwapChain()
          height = windowRect.bottom - windowRect.top;
-+#else
-+        ABI::Windows::Foundation::Rect windowRect;
-+        ABI::Windows::UI::Core::ICoreWindow *window;
-+        HRESULT hr = mWindow->QueryInterface(IID_PPV_ARGS(&window));
-+        if (FAILED(hr))
-+            return false;
-+        window->get_Bounds(&windowRect);
-+        width = windowRect.Width;
-+        height = windowRect.Height;
-+#endif
      }
      else
++#endif
      {
-@@ -221,7 +238,7 @@ bool Surface::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
+         // non-window surface - size is determined at creation
+         width = mWidth;
+@@ -207,7 +305,7 @@ bool Surface::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
+         return true;
+     }
+ 
+-    EGLint status = mSwapChain->swapRect(x, y, width, height);
++    EGLint status = mSwapChain->swapRect(x, y, width, height, mSwapFlags);
+ 
+     if (status == EGL_CONTEXT_LOST)
+     {
+@@ -224,7 +322,7 @@ bool Surface::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
      return true;
  }
  
@@ -384,15 +492,15 @@ index 12f8dfd..3443355 100644
  {
      return mWindow;
  }
-@@ -230,6 +247,7 @@ HWND Surface::getWindowHandle()
+@@ -233,6 +331,7 @@ HWND Surface::getWindowHandle()
  #define kSurfaceProperty _TEXT("Egl::SurfaceOwner")
  #define kParentWndProc _TEXT("Egl::SurfaceParentWndProc")
  
-+#if !defined(ANGLE_OS_WINRT)
++#if !defined(ANGLE_PLATFORM_WINRT)
  static LRESULT CALLBACK SurfaceWindowProc(HWND hwnd, UINT message, WPARAM wparam, LPARAM lparam)
  {
    if (message == WM_SIZE)
-@@ -243,9 +261,13 @@ static LRESULT CALLBACK SurfaceWindowProc(HWND hwnd, UINT message, WPARAM wparam
+@@ -246,9 +345,11 @@ static LRESULT CALLBACK SurfaceWindowProc(HWND hwnd, UINT message, WPARAM wparam
    WNDPROC prevWndFunc = reinterpret_cast<WNDPROC >(GetProp(hwnd, kParentWndProc));
    return CallWindowProc(prevWndFunc, hwnd, message, wparam, lparam);
  }
@@ -400,26 +508,26 @@ index 12f8dfd..3443355 100644
  
  void Surface::subclassWindow()
  {
-+#if defined(ANGLE_OS_WINRT)
-+    mWindowSubclassed = false;
-+#else
++#if !defined(ANGLE_PLATFORM_WINRT)
      if (!mWindow)
      {
          return;
-@@ -269,10 +291,12 @@ void Surface::subclassWindow()
+@@ -272,10 +373,14 @@ void Surface::subclassWindow()
      SetProp(mWindow, kSurfaceProperty, reinterpret_cast<HANDLE>(this));
      SetProp(mWindow, kParentWndProc, reinterpret_cast<HANDLE>(oldWndProc));
      mWindowSubclassed = true;
++#else
++    mWindowSubclassed = false;
 +#endif
  }
  
  void Surface::unsubclassWindow()
  {
-+#if !defined(ANGLE_OS_WINRT)
++#if !defined(ANGLE_PLATFORM_WINRT)
      if(!mWindowSubclassed)
      {
          return;
-@@ -295,10 +319,12 @@ void Surface::unsubclassWindow()
+@@ -299,16 +404,18 @@ void Surface::unsubclassWindow()
      RemoveProp(mWindow, kSurfaceProperty);
      RemoveProp(mWindow, kParentWndProc);
      mWindowSubclassed = false;
@@ -428,51 +536,134 @@ index 12f8dfd..3443355 100644
  
  bool Surface::checkForOutOfDateSwapChain()
  {
-+#if !defined(ANGLE_OS_WINRT)
-     RECT client;
-     if (!GetClientRect(getWindowHandle(), &client))
-     {
-@@ -309,14 +335,26 @@ bool Surface::checkForOutOfDateSwapChain()
-     // Grow the buffer now, if the window has grown. We need to grow now to avoid losing information.
-     int clientWidth = client.right - client.left;
-     int clientHeight = client.bottom - client.top;
-+#else
-+    ABI::Windows::Foundation::Rect windowRect;
-+    ABI::Windows::UI::Core::ICoreWindow *window;
-+    HRESULT hr = mWindow->QueryInterface(IID_PPV_ARGS(&window));
-+    if (FAILED(hr))
-+        return false;
-+    window->get_Bounds(&windowRect);
-+    int clientWidth = windowRect.Width;
-+    int clientHeight = windowRect.Height;
-+#endif
-     bool sizeDirty = clientWidth != getWidth() || clientHeight != getHeight();
- 
-+#if !defined(ANGLE_OS_WINRT)
-     if (IsIconic(getWindowHandle()))
+-    RECT client;
+     int clientWidth = getWidth();
+     int clientHeight = getHeight();
+     bool sizeDirty = false;
++#if !defined(ANGLE_PLATFORM_WINRT)
+     if (!mFixedSize && !IsIconic(getWindowHandle()))
      {
++        RECT client;
          // The window is automatically resized to 150x22 when it's minimized, but the swapchain shouldn't be resized
          // because that's not a useful size to render to.
-         sizeDirty = false;
+         if (!GetClientRect(getWindowHandle(), &client))
+@@ -322,6 +429,7 @@ bool Surface::checkForOutOfDateSwapChain()
+         clientHeight = client.bottom - client.top;
+         sizeDirty = clientWidth != getWidth() || clientHeight != getHeight();
      }
 +#endif
  
      bool wasDirty = (mSwapIntervalDirty || sizeDirty);
  
+@@ -446,4 +554,73 @@ EGLenum Surface::getFormat() const
+ {
+     return mConfig->mRenderTargetFormat;
+ }
++
++#if defined(ANGLE_PLATFORM_WINRT)
++
++HRESULT Surface::onSizeChanged(ICoreWindow *, IWindowSizeChangedEventArgs *args)
++{
++    HRESULT hr;
++    Size size;
++    hr = args->get_Size(&size);
++    ASSERT(SUCCEEDED(hr));
++
++    resizeSwapChain(std::floor(size.Width * mScaleFactor + 0.5),
++                    std::floor(size.Height * mScaleFactor + 0.5));
++
++    if (static_cast<egl::Surface*>(getCurrentDrawSurface()) == this)
++    {
++        glMakeCurrent(glGetCurrentContext(), static_cast<egl::Display*>(getCurrentDisplay()), this);
++    }
++
++    return S_OK;
++}
++
++HRESULT Surface::onDpiChanged(IDisplayInformation *displayInformation, IInspectable *)
++{
++    HRESULT hr;
++#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
++    ComPtr<IDisplayInformation2> displayInformation2;
++    hr = displayInformation->QueryInterface(displayInformation2.GetAddressOf());
++    ASSERT(SUCCEEDED(hr));
++
++    hr = displayInformation2->get_RawPixelsPerViewPixel(&mScaleFactor);
++    ASSERT(SUCCEEDED(hr));
++#   else
++    ResolutionScale resolutionScale;
++    hr = displayInformation->get_ResolutionScale(&resolutionScale);
++    ASSERT(SUCCEEDED(hr));
++
++    mScaleFactor = double(resolutionScale) / 100.0;
++#   endif
++    return S_OK;
++}
++
++#   if WINAPI_FAMILY == WINAPI_FAMILY_PHONE_APP
++HRESULT Surface::onOrientationChanged(IDisplayInformation *displayInformation, IInspectable *)
++{
++    HRESULT hr;
++    DisplayOrientations orientation;
++    hr = displayInformation->get_CurrentOrientation(&orientation);
++    ASSERT(SUCCEEDED(hr));
++    switch (orientation) {
++    default:
++    case DisplayOrientations_Portrait:
++        mSwapFlags = rx::SWAP_NORMAL;
++        break;
++    case DisplayOrientations_Landscape:
++        mSwapFlags = rx::SWAP_ROTATE_90;
++        break;
++    case DisplayOrientations_LandscapeFlipped:
++        mSwapFlags = rx::SWAP_ROTATE_270;
++        break;
++    case DisplayOrientations_PortraitFlipped:
++        mSwapFlags = rx::SWAP_ROTATE_180;
++        break;
++    }
++    return S_OK;
++}
++#   endif
++
++#endif
++
+ }
 diff --git a/src/3rdparty/angle/src/libEGL/Surface.h b/src/3rdparty/angle/src/libEGL/Surface.h
-index 938b800..1d2303c 100644
+index 24c66b7..ebffce8fe 100644
 --- a/src/3rdparty/angle/src/libEGL/Surface.h
 +++ b/src/3rdparty/angle/src/libEGL/Surface.h
-@@ -34,7 +34,7 @@ class Config;
+@@ -15,6 +15,20 @@
+ 
+ #include "common/angleutils.h"
+ 
++#if defined(ANGLE_PLATFORM_WINRT)
++#include <EventToken.h>
++namespace ABI { namespace Windows {
++    namespace UI { namespace Core {
++        struct ICoreWindow;
++        struct IWindowSizeChangedEventArgs;
++    } }
++    namespace Graphics { namespace Display {
++        struct IDisplayInformation;
++    } }
++} }
++struct IInspectable;
++#endif
++
+ namespace gl
+ {
+ class Texture2D;
+@@ -33,7 +47,7 @@ class Config;
  class Surface
  {
    public:
--    Surface(Display *display, const egl::Config *config, HWND window, EGLint postSubBufferSupported);
-+    Surface(Display *display, const egl::Config *config, EGLNativeWindowType window, EGLint postSubBufferSupported);
+-    Surface(Display *display, const egl::Config *config, HWND window, EGLint fixedSize, EGLint width, EGLint height, EGLint postSubBufferSupported);
++    Surface(Display *display, const egl::Config *config, EGLNativeWindowType window, EGLint fixedSize, EGLint width, EGLint height, EGLint postSubBufferSupported);
      Surface(Display *display, const egl::Config *config, HANDLE shareHandle, EGLint width, EGLint height, EGLenum textureFormat, EGLenum textureTarget);
  
-     ~Surface();
-@@ -43,7 +43,7 @@ class Surface
+     virtual ~Surface();
+@@ -42,7 +56,7 @@ class Surface
      void release();
      bool resetSwapChain();
  
@@ -481,422 +672,265 @@ index 938b800..1d2303c 100644
      bool swap();
      bool postSubBuffer(EGLint x, EGLint y, EGLint width, EGLint height);
  
-@@ -79,7 +79,7 @@ private:
+@@ -71,6 +85,14 @@ class Surface
+ private:
+     DISALLOW_COPY_AND_ASSIGN(Surface);
+ 
++#if defined(ANGLE_PLATFORM_WINRT)
++    HRESULT onSizeChanged(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IWindowSizeChangedEventArgs *);
++    HRESULT onDpiChanged(ABI::Windows::Graphics::Display::IDisplayInformation *, IInspectable *);
++#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
++    HRESULT onOrientationChanged(ABI::Windows::Graphics::Display::IDisplayInformation *, IInspectable *);
++#   endif
++#endif
++
+     Display *const mDisplay;
+     rx::Renderer *mRenderer;
+ 
+@@ -83,7 +105,7 @@ private:
      bool resetSwapChain(int backbufferWidth, int backbufferHeight);
      bool swapRect(EGLint x, EGLint y, EGLint width, EGLint height);
  
 -    const HWND mWindow;            // Window that the surface is created for.
-+    const EGLNativeWindowType mWindow; // Window that the surface is created for.
++    const EGLNativeWindowType mWindow;            // Window that the surface is created for.
      bool mWindowSubclassed;        // Indicates whether we successfully subclassed mWindow for WM_RESIZE hooking
      const egl::Config *mConfig;    // EGL config surface was created with
      EGLint mHeight;                // Height of surface
+@@ -104,9 +126,18 @@ private:
+     EGLint mSwapInterval;
+     EGLint mPostSubBufferSupported;
+     EGLint mFixedSize;
++    EGLint mSwapFlags;
+ 
+     bool mSwapIntervalDirty;
+     gl::Texture2D *mTexture;
++#if defined(ANGLE_PLATFORM_WINRT)
++    double mScaleFactor;
++    EventRegistrationToken mSizeToken;
++    EventRegistrationToken mDpiToken;
++#   if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
++    EventRegistrationToken mOrientationToken;
++#   endif
++#endif
+ };
+ }
+ 
 diff --git a/src/3rdparty/angle/src/libEGL/libEGL.cpp b/src/3rdparty/angle/src/libEGL/libEGL.cpp
-index 0ea46d4..b2944d5 100644
+index 7ce2b93..7ea11c5 100644
 --- a/src/3rdparty/angle/src/libEGL/libEGL.cpp
 +++ b/src/3rdparty/angle/src/libEGL/libEGL.cpp
-@@ -308,14 +308,16 @@ EGLSurface __stdcall eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config, EG
-             return EGL_NO_SURFACE;
-         }
+@@ -13,6 +13,7 @@
  
-+#if !defined(ANGLE_OS_WINRT)
-         HWND window = (HWND)win;
+ #include "common/debug.h"
+ #include "common/version.h"
++#include "common/platform.h"
+ #include "libGLESv2/Context.h"
+ #include "libGLESv2/Texture.h"
+ #include "libGLESv2/main.h"
+@@ -120,12 +121,13 @@ EGLDisplay __stdcall eglGetPlatformDisplayEXT(EGLenum platform, void *native_dis
+     }
  
-         if (!IsWindow(window))
-         {
-             return egl::error(EGL_BAD_NATIVE_WINDOW, EGL_NO_SURFACE);
-         }
+     EGLNativeDisplayType displayId = static_cast<EGLNativeDisplayType>(native_display);
+-
++#if !defined(ANGLE_PLATFORM_WINRT)
+     // Validate the display device context
+     if (WindowFromDC(displayId) == NULL)
+     {
+         return egl::success(EGL_NO_DISPLAY);
+     }
 +#endif
  
--        return display->createWindowSurface(window, config, attrib_list);
-+        return display->createWindowSurface(win, config, attrib_list);
+     EGLint requestedDisplayType = EGL_PLATFORM_ANGLE_TYPE_DEFAULT_ANGLE;
+     if (attrib_list)
+@@ -327,14 +329,16 @@ EGLSurface __stdcall eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config, EG
+         return EGL_NO_SURFACE;
      }
-     catch(std::bad_alloc&)
+ 
++#if !defined(ANGLE_PLATFORM_WINRT)
+     HWND window = (HWND)win;
+ 
+     if (!IsWindow(window))
      {
+         return egl::error(EGL_BAD_NATIVE_WINDOW, EGL_NO_SURFACE);
+     }
++#endif
+ 
+-    return display->createWindowSurface(window, config, attrib_list);
++    return display->createWindowSurface(win, config, attrib_list);
+ }
+ 
+ EGLSurface __stdcall eglCreatePbufferSurface(EGLDisplay dpy, EGLConfig config, const EGLint *attrib_list)
 diff --git a/src/3rdparty/angle/src/libEGL/main.cpp b/src/3rdparty/angle/src/libEGL/main.cpp
-index 772b8eb..e972691 100644
+index 8a1baef..e74737e 100644
 --- a/src/3rdparty/angle/src/libEGL/main.cpp
 +++ b/src/3rdparty/angle/src/libEGL/main.cpp
-@@ -1,3 +1,4 @@
-+#include "../libGLESv2/precompiled.h"
- //
- // Copyright (c) 2002-2012 The ANGLE Project Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style license that can be
-@@ -10,14 +11,23 @@
- 
+@@ -11,6 +11,9 @@
  #include "common/debug.h"
+ #include "common/tls.h"
  
-+#if !defined(ANGLE_OS_WINRT)
- static DWORD currentTLS = TLS_OUT_OF_INDEXES;
-+#else
-+static __declspec(thread) void *currentTLS = 0;
++#if defined(ANGLE_PLATFORM_WINRT)
++__declspec(thread)
 +#endif
+ static TLSIndex currentTLS = TLS_OUT_OF_INDEXES;
  
  namespace egl
- {
+@@ -18,6 +21,12 @@ namespace egl
  
  Current *AllocateCurrent()
  {
-+#if !defined(ANGLE_OS_WINRT)
-     Current *current = (egl::Current*)LocalAlloc(LPTR, sizeof(egl::Current));
-+#else
-+    currentTLS = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(Current));
-+    Current *current = (egl::Current*)currentTLS;
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (currentTLS == TLS_OUT_OF_INDEXES)
++    {
++        currentTLS = CreateTLSIndex();
++    }
 +#endif
- 
-     if (!current)
-     {
-@@ -25,8 +35,10 @@ Current *AllocateCurrent()
-         return NULL;
-     }
- 
-+#if !defined(ANGLE_OS_WINRT)
      ASSERT(currentTLS != TLS_OUT_OF_INDEXES);
-     TlsSetValue(currentTLS, current);
-+#endif
- 
-     current->error = EGL_SUCCESS;
-     current->API = EGL_OPENGL_ES_API;
-@@ -39,12 +51,20 @@ Current *AllocateCurrent()
+     if (currentTLS == TLS_OUT_OF_INDEXES)
+     {
+@@ -42,6 +51,12 @@ Current *AllocateCurrent()
  
  void DeallocateCurrent()
  {
-+#if !defined(ANGLE_OS_WINRT)
-     void *current = TlsGetValue(currentTLS);
- 
-     if (current)
-     {
-         LocalFree((HLOCAL)current);
-     }
-+#else
-+    if (currentTLS)
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (currentTLS == TLS_OUT_OF_INDEXES)
 +    {
-+        HeapFree(GetProcessHeap(), 0, currentTLS);
-+        currentTLS = 0;
++        return;
 +    }
 +#endif
- }
- 
- }
-@@ -69,13 +89,14 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
-                 }
+     Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
+     SafeDelete(current);
+     SetTLSValue(currentTLS, NULL);
+@@ -72,6 +87,10 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
              }
  #endif
--
-+#if !defined(ANGLE_OS_WINRT)
-             currentTLS = TlsAlloc();
  
++#if defined(ANGLE_PLATFORM_WINRT) // On WinRT, don't handle TLS from DllMain
++            return DisableThreadLibraryCalls(instance);
++#endif
++
+             currentTLS = CreateTLSIndex();
              if (currentTLS == TLS_OUT_OF_INDEXES)
              {
-                 return FALSE;
-             }
-+#endif
-         }
-         // Fall throught to initialize index
-       case DLL_THREAD_ATTACH:
-@@ -91,7 +112,9 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
-       case DLL_PROCESS_DETACH:
+@@ -86,7 +105,9 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
+         break;
+       case DLL_THREAD_DETACH:
          {
++#if !defined(ANGLE_PLATFORM_WINRT)
              egl::DeallocateCurrent();
-+#if !defined(ANGLE_OS_WINRT)
-             TlsFree(currentTLS);
 +#endif
          }
          break;
-       default:
-@@ -107,8 +130,12 @@ namespace egl
- Current *GetCurrentData()
- {
- #ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-+#if !defined(ANGLE_OS_WINRT)
-     Current *current = (Current*)TlsGetValue(currentTLS);
- #else
-+    Current *current = (Current*)currentTLS;
-+#endif
-+#else
-     // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
-     static Current s_current = { EGL_SUCCESS, EGL_OPENGL_ES_API, EGL_NO_DISPLAY, EGL_NO_SURFACE, EGL_NO_SURFACE };
-     Current *current = &s_current;
-diff --git a/src/3rdparty/angle/src/libGLESv2/Context.cpp b/src/3rdparty/angle/src/libGLESv2/Context.cpp
-index 1a058b6..e651785 100644
---- a/src/3rdparty/angle/src/libGLESv2/Context.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/Context.cpp
-@@ -1076,6 +1076,7 @@ void Context::setRenderbufferStorage(GLsizei width, GLsizei height, GLenum inter
-       case GL_RGB565:
-       case GL_RGB8_OES:
-       case GL_RGBA8_OES:
-+      case GL_BGRA8_EXT:
-         renderbuffer = new gl::Colorbuffer(mRenderer,width, height, internalformat, samples);
-         break;
-       case GL_STENCIL_INDEX8:
-diff --git a/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp b/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
-index a33481e..814dfbf 100644
---- a/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/libGLESv2.cpp
-@@ -4895,6 +4895,7 @@ void __stdcall glRenderbufferStorageMultisampleANGLE(GLenum target, GLsizei samp
-               case GL_RGBA8_OES:
-               case GL_STENCIL_INDEX8:
-               case GL_DEPTH24_STENCIL8_OES:
-+              case GL_BGRA8_EXT:
-                 context->setRenderbufferStorage(width, height, internalformat, samples);
-                 break;
-               default:
+       case DLL_PROCESS_DETACH:
 diff --git a/src/3rdparty/angle/src/libGLESv2/main.cpp b/src/3rdparty/angle/src/libGLESv2/main.cpp
-index 6b459d3..95f4b8d 100644
+index 1c577bc..51447e2 100644
 --- a/src/3rdparty/angle/src/libGLESv2/main.cpp
 +++ b/src/3rdparty/angle/src/libGLESv2/main.cpp
-@@ -11,14 +11,23 @@
+@@ -11,6 +11,9 @@
  
- #include "libGLESv2/Context.h"
+ #include "common/tls.h"
  
-+#if !defined(ANGLE_OS_WINRT)
- static DWORD currentTLS = TLS_OUT_OF_INDEXES;
-+#else
-+static __declspec(thread) void *currentTLS = 0;
++#if defined(ANGLE_PLATFORM_WINRT)
++__declspec(thread)
 +#endif
+ static TLSIndex currentTLS = TLS_OUT_OF_INDEXES;
  
  namespace gl
- {
+@@ -18,6 +21,12 @@ namespace gl
  
  Current *AllocateCurrent()
  {
-+#if !defined(ANGLE_OS_WINRT)
-     Current *current = (Current*)LocalAlloc(LPTR, sizeof(Current));
-+#else
-+    currentTLS = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(Current));
-+    Current *current = (Current*)currentTLS;
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (currentTLS == TLS_OUT_OF_INDEXES)
++    {
++        currentTLS = CreateTLSIndex();
++    }
 +#endif
- 
-     if (!current)
-     {
-@@ -26,8 +35,10 @@ Current *AllocateCurrent()
-         return NULL;
-     }
- 
-+#if !defined(ANGLE_OS_WINRT)
      ASSERT(currentTLS != TLS_OUT_OF_INDEXES);
-     TlsSetValue(currentTLS, current);
-+#endif
- 
-     current->context = NULL;
-     current->display = NULL;
-@@ -37,12 +48,20 @@ Current *AllocateCurrent()
+     if (currentTLS == TLS_OUT_OF_INDEXES)
+     {
+@@ -39,6 +48,12 @@ Current *AllocateCurrent()
  
  void DeallocateCurrent()
  {
-+#if !defined(ANGLE_OS_WINRT)
-     void *current = TlsGetValue(currentTLS);
- 
-     if (current)
-     {
-         LocalFree((HLOCAL)current);
-     }
-+#else
-+    if (currentTLS)
++#if defined(ANGLE_PLATFORM_WINRT)
++    if (currentTLS == TLS_OUT_OF_INDEXES)
 +    {
-+        HeapFree(GetProcessHeap(), 0, currentTLS);
-+        currentTLS = 0;
++        return;
 +    }
 +#endif
- }
- 
- }
-@@ -53,12 +72,14 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
+     Current *current = reinterpret_cast<Current*>(GetTLSValue(currentTLS));
+     SafeDelete(current);
+     SetTLSValue(currentTLS, NULL);
+@@ -54,6 +69,9 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
      {
        case DLL_PROCESS_ATTACH:
          {
-+#if !defined(ANGLE_OS_WINRT)
-             currentTLS = TlsAlloc();
- 
++#if defined(ANGLE_PLATFORM_WINRT) // On WinRT, don't handle TLS from DllMain
++            return DisableThreadLibraryCalls(instance);
++#endif
+             currentTLS = CreateTLSIndex();
              if (currentTLS == TLS_OUT_OF_INDEXES)
              {
-                 return FALSE;
-             }
-+#endif
-         }
-         // Fall throught to initialize index
-       case DLL_THREAD_ATTACH:
-@@ -74,7 +95,9 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
+@@ -73,8 +91,10 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
+         break;
        case DLL_PROCESS_DETACH:
          {
++#if !defined(ANGLE_PLATFORM_WINRT)
              gl::DeallocateCurrent();
-+#if !defined(ANGLE_OS_WINRT)
-             TlsFree(currentTLS);
+             DestroyTLSIndex(currentTLS);
 +#endif
          }
          break;
        default:
-@@ -90,8 +113,12 @@ namespace gl
- Current *GetCurrentData()
- {
- #ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-+#if !defined(ANGLE_OS_WINRT)
-     Current *current = (Current*)TlsGetValue(currentTLS);
- #else
-+    Current *current = (Current*)currentTLS;
-+#endif
-+#else
-     // No precautions for thread safety taken as ANGLE is used single-threaded in Qt.
-     static Current s_current = { 0, 0 };
-     Current *current = &s_current;
 diff --git a/src/3rdparty/angle/src/libGLESv2/main.h b/src/3rdparty/angle/src/libGLESv2/main.h
-index b413f23..69465c9 100644
+index 684c302..c30ad33 100644
 --- a/src/3rdparty/angle/src/libGLESv2/main.h
 +++ b/src/3rdparty/angle/src/libGLESv2/main.h
-@@ -57,7 +57,7 @@ gl::Context *glCreateContext(const gl::Context *shareContext, rx::Renderer *rend
- void glDestroyContext(gl::Context *context);
- void glMakeCurrent(gl::Context *context, egl::Display *display, egl::Surface *surface);
- gl::Context *glGetCurrentContext();
--rx::Renderer *glCreateRenderer(egl::Display *display, HDC hDc, EGLNativeDisplayType displayId);
-+rx::Renderer *glCreateRenderer(egl::Display *display, EGLNativeDisplayType displayId);
- void glDestroyRenderer(rx::Renderer *renderer);
- 
- __eglMustCastToProperFunctionPointerType __stdcall glGetProcAddress(const char *procname);
-diff --git a/src/3rdparty/angle/src/libGLESv2/precompiled.h b/src/3rdparty/angle/src/libGLESv2/precompiled.h
-index 79490b1..2ff09f5 100644
---- a/src/3rdparty/angle/src/libGLESv2/precompiled.h
-+++ b/src/3rdparty/angle/src/libGLESv2/precompiled.h
-@@ -32,14 +32,55 @@
- #include <unordered_map>
- #include <vector>
- 
-+#if defined(WINAPI_FAMILY) && (WINAPI_FAMILY==WINAPI_FAMILY_APP || WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP)
-+#  define ANGLE_OS_WINRT
-+#  if WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
-+#    define ANGLE_OS_WINPHONE
-+#  endif
-+#endif
-+
- #if defined(ANGLE_ENABLE_D3D9)
- #  include <d3d9.h>
- #endif
- #if defined(ANGLE_ENABLE_D3D11)
--#  include <d3d11.h>
-+#  if !defined(ANGLE_OS_WINRT)
-+#    include <d3d11.h>
-+#  else
-+#    include <d3d11_1.h>
-+#    define Sleep(x) WaitForSingleObjectEx(GetCurrentThread(), x, FALSE)
-+#    define GetVersion() WINVER
-+#    define LoadLibrary(x) LoadPackagedLibrary(x, NULL)
-+#  endif
- #  include <dxgi.h>
- #endif
--#include <d3dcompiler.h>
-+#if !defined(ANGLE_OS_WINPHONE)
-+#  include <d3dcompiler.h>
-+#endif
-+
-+#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL0
-+#define D3DCOMPILE_OPTIMIZATION_LEVEL0 (1 << 14)
-+#endif
-+#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL1
-+#define D3DCOMPILE_OPTIMIZATION_LEVEL1 0
-+#endif
-+#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL2
-+#define D3DCOMPILE_OPTIMIZATION_LEVEL2 ((1 << 14) | (1 << 15))
-+#endif
-+#ifndef D3DCOMPILE_OPTIMIZATION_LEVEL3
-+#define D3DCOMPILE_OPTIMIZATION_LEVEL3 (1 << 15)
-+#endif
-+#ifndef D3DCOMPILE_DEBUG
-+#define D3DCOMPILE_DEBUG (1 << 0)
-+#endif
-+#ifndef D3DCOMPILE_SKIP_OPTIMIZATION
-+#define D3DCOMPILE_SKIP_OPTIMIZATION (1 << 2)
-+#endif
-+#ifndef D3DCOMPILE_AVOID_FLOW_CONTROL
-+#define D3DCOMPILE_AVOID_FLOW_CONTROL (1 << 9)
-+#endif
-+#ifndef D3DCOMPILE_PREFER_FLOW_CONTROL
-+#define D3DCOMPILE_PREFER_FLOW_CONTROL (1 << 10)
-+#endif
- 
- #ifdef _MSC_VER
- #include <hash_map>
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-index 94cbc0e..5278113 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.cpp
-@@ -24,7 +24,7 @@
- #define D3DERR_OUTOFVIDEOMEMORY MAKE_HRESULT(1, 0x876, 380)
- #endif
- 
--#ifdef __MINGW32__
-+#if defined(__MINGW32__) || defined(ANGLE_OS_WINPHONE)
+@@ -14,6 +14,10 @@
+ #include <GLES2/gl2.h>
+ #include <EGL/egl.h>
  
- #ifndef D3DCOMPILER_DLL
- 
-@@ -41,7 +41,7 @@ typedef HRESULT (WINAPI *pD3DCompile)(const void *data, SIZE_T data_size, const
- 
- #endif // D3DCOMPILER_DLL
- 
--#endif // __MINGW32__
-+#endif // __MINGW32__ || ANGLE_OS_WINPHONE
- 
- #ifndef QT_D3DCOMPILER_DLL
- #define QT_D3DCOMPILER_DLL D3DCOMPILER_DLL
-@@ -224,17 +224,22 @@ ShaderBlob *Renderer::compileToBinary(gl::InfoLog &infoLog, const char *hlsl, co
- extern "C"
- {
- 
--rx::Renderer *glCreateRenderer(egl::Display *display, HDC hDc, EGLNativeDisplayType displayId)
-+rx::Renderer *glCreateRenderer(egl::Display *display, EGLNativeDisplayType displayId)
- {
-     rx::Renderer *renderer = NULL;
-     EGLint status = EGL_BAD_ALLOC;
- 
-+#if defined(ANGLE_OS_WINRT)
-+    if (displayId == EGL_DEFAULT_DISPLAY)
-+        displayId = EGL_D3D11_ONLY_DISPLAY_ANGLE;
++#ifndef Sleep
++#define Sleep(ms) WaitForSingleObjectEx(GetCurrentThread(), ms, FALSE)
 +#endif
 +
- #if defined(ANGLE_ENABLE_D3D11)
-     if (displayId == EGL_DEFAULT_DISPLAY ||
-         displayId == EGL_D3D11_ELSE_D3D9_DISPLAY_ANGLE ||
-         displayId == EGL_D3D11_ONLY_DISPLAY_ANGLE)
-     {
--        renderer = new rx::Renderer11(display, hDc);
-+        renderer = new rx::Renderer11(display);
- 
-         if (renderer)
-         {
-@@ -257,7 +262,7 @@ rx::Renderer *glCreateRenderer(egl::Display *display, HDC hDc, EGLNativeDisplayT
- 
- #if defined(ANGLE_ENABLE_D3D9)
-     bool softwareDevice = (displayId == EGL_SOFTWARE_DISPLAY_ANGLE);
--    renderer = new rx::Renderer9(display, hDc, softwareDevice);
-+    renderer = new rx::Renderer9(display, displayId, softwareDevice);
- 
-     if (renderer)
-     {
+ namespace egl
+ {
+ class Display;
 diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h
-index 7244a0a..79578b2 100644
+index 7adbea2..b224974 100644
 --- a/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h
 +++ b/src/3rdparty/angle/src/libGLESv2/renderer/Renderer.h
-@@ -1,3 +1,4 @@
-+#include "../precompiled.h"
- //
- // Copyright (c) 2012-2013 The ANGLE Project Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style license that can be
-@@ -113,7 +114,7 @@ class Renderer
+@@ -107,7 +107,7 @@ class Renderer
  
      virtual void sync(bool block) = 0;
  
 -    virtual SwapChain *createSwapChain(HWND window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat) = 0;
 +    virtual SwapChain *createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat) = 0;
  
-     virtual void setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler) = 0;
-     virtual void setTexture(gl::SamplerType type, int index, gl::Texture *texture) = 0;
+     virtual gl::Error generateSwizzle(gl::Texture *texture) = 0;
+     virtual gl::Error setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler) = 0;
 diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h b/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
-index f09f19b..8231fbc 100644
+index 12be9b3..1ec702f 100644
 --- a/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
 +++ b/src/3rdparty/angle/src/libGLESv2/renderer/SwapChain.h
-@@ -1,3 +1,4 @@
-+#include "../precompiled.h"
- //
- // Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style license that can be
-@@ -22,7 +23,7 @@ namespace rx
+@@ -15,14 +15,23 @@
+ 
+ #include <GLES2/gl2.h>
+ #include <EGL/egl.h>
++#include <EGL/eglplatform.h>
+ 
+ namespace rx
+ {
+ 
++enum SwapFlags
++{
++    SWAP_NORMAL = 0,
++    SWAP_ROTATE_90 = 1,
++    SWAP_ROTATE_270 = 2,
++    SWAP_ROTATE_180 = SWAP_ROTATE_90|SWAP_ROTATE_270,
++};
++
  class SwapChain
  {
    public:
@@ -905,45 +939,88 @@ index f09f19b..8231fbc 100644
          : mWindow(window), mShareHandle(shareHandle), mBackBufferFormat(backBufferFormat), mDepthBufferFormat(depthBufferFormat)
      {
      }
-@@ -37,7 +38,7 @@ class SwapChain
+@@ -31,13 +40,13 @@ class SwapChain
+ 
+     virtual EGLint resize(EGLint backbufferWidth, EGLint backbufferSize) = 0;
+     virtual EGLint reset(EGLint backbufferWidth, EGLint backbufferHeight, EGLint swapInterval) = 0;
+-    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height) = 0;
++    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint flags) = 0;
+     virtual void recreate() = 0;
+ 
      virtual HANDLE getShareHandle() {return mShareHandle;};
  
    protected:
 -    const HWND mWindow;            // Window that the surface is created for.
-+    const EGLNativeWindowType mWindow;  // Window that the surface is created for.
++    const EGLNativeWindowType mWindow;            // Window that the surface is created for.
      const GLenum mBackBufferFormat;
      const GLenum mDepthBufferFormat;
  
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-index d9fcb7a..7f166fd 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-@@ -66,7 +66,7 @@ enum
-     MAX_TEXTURE_IMAGE_UNITS_VTF_SM4 = 16
- };
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+index 5715d5f..d013197 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp
+@@ -9,6 +9,7 @@
+ #include "libGLESv2/main.h"
+ 
+ #include "common/utilities.h"
++#include "common/platform.h"
+ 
+ #if defined(__MINGW32__) && !defined(D3DCOMPILER_DLL)
  
--Renderer11::Renderer11(egl::Display *display, HDC hDc) : Renderer(display), mDc(hDc)
-+Renderer11::Renderer11(egl::Display *display) : Renderer(display)
+@@ -45,11 +46,7 @@ HLSLCompiler::~HLSLCompiler()
+ 
+ bool HLSLCompiler::initialize()
+ {
+-<<<<<<< HEAD
+-    TRACE_EVENT0("gpu", "initializeCompiler");
+-=======
+ #if !defined(ANGLE_PLATFORM_WINRT)
+->>>>>>> 429814a... ANGLE: remove event tracing
+ #if defined(ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES)
+     // Find a D3DCompiler module that had already been loaded based on a predefined list of versions.
+     static const char *d3dCompilerNames[] = ANGLE_PRELOADED_D3DCOMPILER_MODULE_NAMES;
+@@ -94,7 +91,9 @@ bool HLSLCompiler::initialize()
+ 
+     mD3DCompileFunc = reinterpret_cast<CompileFuncPtr>(GetProcAddress(mD3DCompilerModule, "D3DCompile"));
+     ASSERT(mD3DCompileFunc);
+-
++#else
++    mD3DCompileFunc = reinterpret_cast<CompileFuncPtr>(&D3DCompile);
++#endif
+     return mD3DCompileFunc != NULL;
+ }
+ 
+@@ -111,7 +110,9 @@ void HLSLCompiler::release()
+ ShaderBlob *HLSLCompiler::compileToBinary(gl::InfoLog &infoLog, const char *hlsl, const char *profile,
+                                           const UINT optimizationFlags[], const char *flagNames[], int attempts) const
  {
-     mVertexDataManager = NULL;
-     mIndexDataManager = NULL;
-@@ -137,6 +137,7 @@ EGLint Renderer11::initialize()
++#if !defined(ANGLE_PLATFORM_WINRT)
+     ASSERT(mD3DCompilerModule && mD3DCompileFunc);
++#endif
+ 
+     if (!hlsl)
+     {
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+index ed880c3..0bb7489 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+@@ -6,6 +6,7 @@
+ 
+ // Renderer11.cpp: Implements a back-end specific class for the D3D11 renderer.
+ 
++#include "common/platform.h"
+ #include "libGLESv2/main.h"
+ #include "libGLESv2/Buffer.h"
+ #include "libGLESv2/FramebufferAttachment.h"
+@@ -135,6 +136,7 @@ EGLint Renderer11::initialize()
          return EGL_NOT_INITIALIZED;
      }
  
-+#if !defined(ANGLE_OS_WINRT)
++#if !defined(ANGLE_PLATFORM_WINRT)
      mDxgiModule = LoadLibrary(TEXT("dxgi.dll"));
      mD3d11Module = LoadLibrary(TEXT("d3d11.dll"));
  
-@@ -146,6 +147,7 @@ EGLint Renderer11::initialize()
-         return EGL_NOT_INITIALIZED;
-     }
- 
-+
-     // create the D3D11 device
-     ASSERT(mDevice == NULL);
-     PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = (PFN_D3D11_CREATE_DEVICE)GetProcAddress(mD3d11Module, "D3D11CreateDevice");
-@@ -155,6 +157,7 @@ EGLint Renderer11::initialize()
+@@ -153,6 +155,7 @@ EGLint Renderer11::initialize()
          ERR("Could not retrieve D3D11CreateDevice address - aborting!\n");
          return EGL_NOT_INITIALIZED;
      }
@@ -951,11 +1028,20 @@ index d9fcb7a..7f166fd 100644
  
      D3D_FEATURE_LEVEL featureLevels[] =
      {
-@@ -203,8 +206,12 @@ EGLint Renderer11::initialize()
+@@ -207,7 +210,7 @@ EGLint Renderer11::initialize()
          }
      }
  
-+#if !defined(ANGLE_OS_WINRT)
+-#if !ANGLE_SKIP_DXGI_1_2_CHECK
++#if !ANGLE_SKIP_DXGI_1_2_CHECK && !defined(ANGLE_PLATFORM_WINRT)
+     // In order to create a swap chain for an HWND owned by another process, DXGI 1.2 is required.
+     // The easiest way to check is to query for a IDXGIDevice2.
+     bool requireDXGI1_2 = false;
+@@ -237,8 +240,12 @@ EGLint Renderer11::initialize()
+     }
+ #endif
+ 
++#if !defined(ANGLE_PLATFORM_WINRT)
      IDXGIDevice *dxgiDevice = NULL;
 -    result = mDevice->QueryInterface(__uuidof(IDXGIDevice), (void**)&dxgiDevice);
 +#else
@@ -965,7 +1051,7 @@ index d9fcb7a..7f166fd 100644
  
      if (FAILED(result))
      {
-@@ -522,7 +529,7 @@ void Renderer11::sync(bool block)
+@@ -408,7 +415,7 @@ void Renderer11::sync(bool block)
      }
  }
  
@@ -974,41 +1060,41 @@ index d9fcb7a..7f166fd 100644
  {
      return new rx::SwapChain11(this, window, shareHandle, backBufferFormat, depthBufferFormat);
  }
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-index 1b6760b..ba3f0c6 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-@@ -39,7 +39,7 @@ enum
- class Renderer11 : public Renderer
- {
-   public:
--    Renderer11(egl::Display *display, HDC hDc);
-+    Renderer11(egl::Display *display);
-     virtual ~Renderer11();
- 
-     static Renderer11 *makeRenderer11(Renderer *renderer);
-@@ -52,7 +52,7 @@ class Renderer11 : public Renderer
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
+index d309f14..b86f5e5 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
+@@ -57,7 +57,7 @@ class Renderer11 : public Renderer
  
      virtual void sync(bool block);
  
 -    virtual SwapChain *createSwapChain(HWND window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat);
 +    virtual SwapChain *createSwapChain(EGLNativeWindowType window, HANDLE shareHandle, GLenum backBufferFormat, GLenum depthBufferFormat);
  
-     virtual void setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler);
-     virtual void setTexture(gl::SamplerType type, int index, gl::Texture *texture);
-@@ -203,7 +203,6 @@ class Renderer11 : public Renderer
+     virtual gl::Error generateSwizzle(gl::Texture *texture);
+     virtual gl::Error setSamplerState(gl::SamplerType type, int index, const gl::SamplerState &sampler);
+@@ -222,7 +222,7 @@ class Renderer11 : public Renderer
  
      HMODULE mD3d11Module;
      HMODULE mDxgiModule;
 -    HDC mDc;
- 
-     bool mDeviceLost;
- 
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.cpp
-index d2b53a7..bd97d5c 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.cpp
-@@ -18,7 +18,7 @@
++    EGLNativeDisplayType mDc;
+     EGLint mRequestedDisplay;
+ 
+     HLSLCompiler mCompiler;
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
+index 50dae4e..787c511 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
+@@ -6,6 +6,7 @@
+ 
+ // SwapChain11.cpp: Implements a back-end specific class for the D3D11 swap chain.
+ 
++#include "common/platform.h"
+ #include "libGLESv2/renderer/d3d/d3d11/SwapChain11.h"
+ #include "libGLESv2/renderer/d3d/d3d11/renderer11_utils.h"
+ #include "libGLESv2/renderer/d3d/d3d11/formatutils11.h"
+@@ -18,7 +19,7 @@
  namespace rx
  {
  
@@ -1017,83 +1103,170 @@ index d2b53a7..bd97d5c 100644
                           GLenum backBufferFormat, GLenum depthBufferFormat)
      : mRenderer(renderer), SwapChain(window, shareHandle, backBufferFormat, depthBufferFormat)
  {
-@@ -361,25 +361,50 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
+@@ -38,6 +39,8 @@ SwapChain11::SwapChain11(Renderer11 *renderer, HWND window, HANDLE shareHandle,
+     mPassThroughPS = NULL;
+     mWidth = -1;
+     mHeight = -1;
++    mViewportWidth = -1;
++    mViewportHeight = -1;
+     mSwapInterval = 0;
+     mAppCreatedShareHandle = mShareHandle != NULL;
+     mPassThroughResourcesInit = false;
+@@ -92,6 +95,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
+     ASSERT(backbufferHeight >= 1);
+ 
+     // Preserve the render target content
++#if !defined(ANGLE_PLATFORM_WINRT)
+     ID3D11Texture2D *previousOffscreenTexture = mOffscreenTexture;
+     if (previousOffscreenTexture)
+     {
+@@ -99,6 +103,7 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
+     }
+     const int previousWidth = mWidth;
+     const int previousHeight = mHeight;
++#endif
+ 
+     releaseOffscreenTexture();
+ 
+@@ -281,7 +286,12 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
+ 
+     mWidth = backbufferWidth;
+     mHeight = backbufferHeight;
++#if !defined(ANGLE_PLATFORM_WINRT) || WINAPI_FAMILY==WINAPI_FAMILY_PC_APP
++    mViewportWidth = backbufferWidth;
++    mViewportHeight = backbufferHeight;
++#endif
  
-     if (mWindow)
++#if !defined(ANGLE_PLATFORM_WINRT)
+     if (previousOffscreenTexture != NULL)
      {
-+#if !defined(ANGLE_OS_WINRT)
+         D3D11_BOX sourceBox = {0};
+@@ -300,9 +310,10 @@ EGLint SwapChain11::resetOffscreenTexture(int backbufferWidth, int backbufferHei
+ 
+         if (mSwapChain)
+         {
+-            swapRect(0, 0, mWidth, mHeight);
++            swapRect(0, 0, mWidth, mHeight, SWAP_NORMAL);
+         }
+     }
++#endif
+ 
+     return EGL_SUCCESS;
+ }
+@@ -329,8 +340,15 @@ EGLint SwapChain11::resize(EGLint backbufferWidth, EGLint backbufferHeight)
+     SafeRelease(mBackBufferRTView);
+ 
+     // Resize swap chain
++    HRESULT result;
++#if !defined(ANGLE_PLATFORM_WINRT) || WINAPI_FAMILY==WINAPI_FAMILY_PC_APP // Windows phone swap chain is never resized, only the texture is
++#if !defined(ANGLE_PLATFORM_WINRT)
++    const int bufferCount = 1;
++#else
++    const int bufferCount = 2;
++#endif
+     const d3d11::TextureFormat &backbufferFormatInfo = d3d11::GetTextureFormatInfo(mBackBufferFormat);
+-    HRESULT result = mSwapChain->ResizeBuffers(1, backbufferWidth, backbufferHeight, backbufferFormatInfo.texFormat, 0);
++    result = mSwapChain->ResizeBuffers(bufferCount, backbufferWidth, backbufferHeight, backbufferFormatInfo.texFormat, 0);
+ 
+     if (FAILED(result))
+     {
+@@ -346,6 +364,7 @@ EGLint SwapChain11::resize(EGLint backbufferWidth, EGLint backbufferHeight)
+             return EGL_BAD_ALLOC;
+         }
+     }
++#endif
+ 
+     result = mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&mBackBufferTexture);
+     ASSERT(SUCCEEDED(result));
+@@ -399,6 +418,7 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
+ 
          IDXGIFactory *factory = mRenderer->getDxgiFactory();
  
++#if !defined(ANGLE_PLATFORM_WINRT)
          DXGI_SWAP_CHAIN_DESC swapChainDesc = {0};
--        swapChainDesc.BufferCount = 2;
-         swapChainDesc.BufferDesc.Format = gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat);
          swapChainDesc.BufferDesc.Width = backbufferWidth;
          swapChainDesc.BufferDesc.Height = backbufferHeight;
-+        swapChainDesc.BufferCount = 2;
-         swapChainDesc.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED;
-         swapChainDesc.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED;
-         swapChainDesc.BufferDesc.RefreshRate.Numerator = 0;
-         swapChainDesc.BufferDesc.RefreshRate.Denominator = 1;
-+        swapChainDesc.Windowed = TRUE;
-+        swapChainDesc.OutputWindow = mWindow;
+@@ -417,7 +437,37 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
+         swapChainDesc.Flags = 0;
+ 
+         HRESULT result = factory->CreateSwapChain(device, &swapChainDesc, &mSwapChain);
 +#else
-+        IDXGIFactory2 *factory;
-+        HRESULT result = mRenderer->getDxgiFactory()->QueryInterface(IID_PPV_ARGS(&factory));
++        IDXGIFactory2 *factory2;
++        HRESULT result = factory->QueryInterface(IID_PPV_ARGS(&factory2));
 +        ASSERT(SUCCEEDED(result));
 +
 +        DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0};
-+        swapChainDesc.Format = gl_d3d11::ConvertRenderbufferFormat(mBackBufferFormat);
-+        swapChainDesc.Width = backbufferWidth;
-+        swapChainDesc.Height = backbufferHeight;
++        swapChainDesc.Width = 0;
++        swapChainDesc.Height = 0;
++        swapChainDesc.Format = backbufferFormatInfo.texFormat;
++        swapChainDesc.SampleDesc.Count = 1;
++        swapChainDesc.SampleDesc.Quality = 0;
++        swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
 +        swapChainDesc.Stereo = FALSE;
-+#if !defined(ANGLE_OS_WINPHONE)
++        swapChainDesc.Flags = 0;
++#if WINAPI_FAMILY==WINAPI_FAMILY_PC_APP
++        swapChainDesc.Scaling = DXGI_SCALING_NONE;
 +        swapChainDesc.BufferCount = 2;
 +        swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL;
-+#else
++#elif WINAPI_FAMILY==WINAPI_FAMILY_PHONE_APP
 +        swapChainDesc.BufferCount = 1;
 +        swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_DISCARD;
 +#endif
-+#endif
-         swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
-         swapChainDesc.Flags = 0;
--        swapChainDesc.OutputWindow = mWindow;
-         swapChainDesc.SampleDesc.Count = 1;
-         swapChainDesc.SampleDesc.Quality = 0;
--        swapChainDesc.Windowed = TRUE;
  
-+#if !defined(ANGLE_OS_WINRT)
-         HRESULT result = factory->CreateSwapChain(device, &swapChainDesc, &mSwapChain);
-+#else
 +        IDXGISwapChain1 *swapChain;
-+        result = factory->CreateSwapChainForCoreWindow(device, mWindow, &swapChainDesc, NULL, &swapChain);
++        result = factory2->CreateSwapChainForCoreWindow(device, mWindow, &swapChainDesc, NULL, &swapChain);
 +        mSwapChain = swapChain;
++        HRESULT hr = swapChain->GetDesc1(&swapChainDesc);
++        ASSERT(SUCCEEDED(hr));
++        mViewportWidth = swapChainDesc.Width;
++        mViewportHeight = swapChainDesc.Height;
 +#endif
- 
          if (FAILED(result))
          {
-@@ -390,6 +415,7 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
-             {
-                 return EGL_CONTEXT_LOST;
-             }
-+#if !defined(ANGLE_OS_WINRT)
-             else
-             {
-                 // We cannot create a swap chain for an HWND that is owned by a different process on some versions of
-@@ -408,6 +434,9 @@ EGLint SwapChain11::reset(int backbufferWidth, int backbufferHeight, EGLint swap
-                     return EGL_BAD_ALLOC;
-                 }
-             }
-+#else
-+            return EGL_BAD_ALLOC;
-+#endif
-         }
+             ERR("Could not create additional swap chains or offscreen surfaces: %08lX", result);
+@@ -513,7 +563,7 @@ void SwapChain11::initPassThroughResources()
+ }
  
-         result = mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&mBackBufferTexture);
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.h
-index 8001046..2a030c8 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.h
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/SwapChain11.h
-@@ -19,7 +19,7 @@ class Renderer11;
+ // parameters should be validated/clamped by caller
+-EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
++EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint flags)
+ {
+     if (!mSwapChain)
+     {
+@@ -544,10 +594,13 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
+     float u2 = (x + width) / float(mWidth);
+     float v2 = (y + height) / float(mHeight);
+ 
+-    d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, u1, v1);
+-    d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, u1, v2);
+-    d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, u2, v1);
+-    d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, u2, v2);
++    const int rotateL = flags & SWAP_ROTATE_90;
++    const int rotateR = flags & SWAP_ROTATE_270;
++
++    d3d11::SetPositionTexCoordVertex(&vertices[0], x1, y1, rotateL ? u2 : u1, rotateR ? v2 : v1);
++    d3d11::SetPositionTexCoordVertex(&vertices[1], x1, y2, rotateR ? u2 : u1, rotateL ? v1 : v2);
++    d3d11::SetPositionTexCoordVertex(&vertices[2], x2, y1, rotateR ? u1 : u2, rotateL ? v2 : v1);
++    d3d11::SetPositionTexCoordVertex(&vertices[3], x2, y2, rotateL ? u1 : u2, rotateR ? v1 : v2);
+ 
+     deviceContext->Unmap(mQuadVB, 0);
+ 
+@@ -577,8 +630,8 @@ EGLint SwapChain11::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
+     D3D11_VIEWPORT viewport;
+     viewport.TopLeftX = 0;
+     viewport.TopLeftY = 0;
+-    viewport.Width = mWidth;
+-    viewport.Height = mHeight;
++    viewport.Width = mViewportWidth;
++    viewport.Height = mViewportHeight;
+     viewport.MinDepth = 0.0f;
+     viewport.MaxDepth = 1.0f;
+     deviceContext->RSSetViewports(1, &viewport);
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h
+index fb0afd7..b30b785 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h
+@@ -19,13 +19,13 @@ class Renderer11;
  class SwapChain11 : public SwapChain
  {
    public:
@@ -1102,109 +1275,48 @@ index 8001046..2a030c8 100644
                  GLenum backBufferFormat, GLenum depthBufferFormat);
      virtual ~SwapChain11();
  
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl
-index 042ac69..cb132dc 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl
-@@ -12,10 +12,12 @@ struct PS_OutputMultiple
- 	float4 color1 : SV_TARGET1;
- 	float4 color2 : SV_TARGET2;
- 	float4 color3 : SV_TARGET3;
-+#ifdef SM4
- 	float4 color4 : SV_TARGET4;
- 	float4 color5 : SV_TARGET5;
- 	float4 color6 : SV_TARGET6;
- 	float4 color7 : SV_TARGET7;
-+#endif
- };
- 
- PS_OutputMultiple PS_ClearMultiple(in float4 inPosition : SV_POSITION, in float4 inColor : COLOR)
-@@ -25,10 +27,12 @@ PS_OutputMultiple PS_ClearMultiple(in float4 inPosition : SV_POSITION, in float4
- 	outColor.color1 = inColor;
- 	outColor.color2 = inColor;
- 	outColor.color3 = inColor;
-+#ifdef SM4
- 	outColor.color4 = inColor;
- 	outColor.color5 = inColor;
- 	outColor.color6 = inColor;
- 	outColor.color7 = inColor;
-+#endif
- 	return outColor;
+     EGLint resize(EGLint backbufferWidth, EGLint backbufferHeight);
+     virtual EGLint reset(EGLint backbufferWidth, EGLint backbufferHeight, EGLint swapInterval);
+-    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height);
++    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint flags);
+     virtual void recreate();
+ 
+     virtual ID3D11Texture2D *getOffscreenTexture();
+@@ -52,6 +52,8 @@ class SwapChain11 : public SwapChain
+     Renderer11 *mRenderer;
+     EGLint mHeight;
+     EGLint mWidth;
++    EGLint mViewportWidth;
++    EGLint mViewportHeight;
+     bool mAppCreatedShareHandle;
+     unsigned int mSwapInterval;
+     bool mPassThroughResourcesInit;
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp
+index f702b79..0aeaabb 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp
+@@ -238,7 +238,7 @@ EGLint SwapChain9::reset(int backbufferWidth, int backbufferHeight, EGLint swapI
  }
  
-diff --git a/src/3rdparty/angle/src/libGLESv2/utilities.cpp b/src/3rdparty/angle/src/libGLESv2/utilities.cpp
-index 32df49e..30765ff 100644
---- a/src/3rdparty/angle/src/libGLESv2/utilities.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/utilities.cpp
-@@ -9,6 +9,14 @@
- 
- #include "libGLESv2/utilities.h"
- #include "libGLESv2/mathutil.h"
-+#if defined(ANGLE_OS_WINRT)
-+#  include <locale>
-+#  include <codecvt>
-+#  include <wrl.h>
-+#  include <windows.storage.h>
-+   using namespace Microsoft::WRL;
-+   using namespace ABI::Windows::Storage;
-+#endif
- 
- namespace gl
+ // parameters should be validated/clamped by caller
+-EGLint SwapChain9::swapRect(EGLint x, EGLint y, EGLint width, EGLint height)
++EGLint SwapChain9::swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint)
  {
-@@ -737,6 +745,7 @@ bool IsTriangleMode(GLenum drawMode)
- 
- std::string getTempPath()
- {
-+#if !defined(ANGLE_OS_WINRT)
-     char path[MAX_PATH];
-     DWORD pathLen = GetTempPathA(sizeof(path) / sizeof(path[0]), path);
-     if (pathLen == 0)
-@@ -751,6 +760,45 @@ std::string getTempPath()
-         UNREACHABLE();
-         return std::string();
-     }
-+#else
-+    static std::string path;
-+
-+    while (path.empty()) {
-+        ComPtr<IApplicationDataStatics> factory;
-+        Wrappers::HStringReference classId(RuntimeClass_Windows_Storage_ApplicationData);
-+        HRESULT result = RoGetActivationFactory(classId.Get(), IID_PPV_ARGS(&factory));
-+        if (FAILED(result))
-+            break;
-+
-+        ComPtr<IApplicationData> applicationData;
-+        result = factory->get_Current(&applicationData);
-+        if (FAILED(result))
-+            break;
-+
-+        ComPtr<IStorageFolder> storageFolder;
-+        result = applicationData->get_LocalFolder(&storageFolder);
-+        if (FAILED(result))
-+            break;
-+
-+        ComPtr<IStorageItem> localFolder;
-+        result = storageFolder.As(&localFolder);
-+        if (FAILED(result))
-+            break;
-+
-+        HSTRING localFolderPath;
-+        result = localFolder->get_Path(&localFolderPath);
-+        if (FAILED(result))
-+            break;
-+
-+        std::wstring_convert< std::codecvt_utf8<wchar_t> > converter;
-+        path = converter.to_bytes(WindowsGetStringRawBuffer(localFolderPath, NULL));
-+        if (path.empty())
-+        {
-+            UNREACHABLE();
-+            break;
-+        }
-+    }
-+#endif
-     
-     return path;
- }
+     if (!mSwapChain)
+     {
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h
+index 16a62bd..4d756f8 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h
+@@ -25,7 +25,7 @@ class SwapChain9 : public SwapChain
+ 
+     EGLint resize(EGLint backbufferWidth, EGLint backbufferHeight);
+     virtual EGLint reset(EGLint backbufferWidth, EGLint backbufferHeight, EGLint swapInterval);
+-    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height);
++    virtual EGLint swapRect(EGLint x, EGLint y, EGLint width, EGLint height, EGLint);
+     virtual void recreate();
+ 
+     virtual IDirect3DSurface9 *getRenderTarget();
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0010-ANGLE-Enable-D3D11-for-feature-level-9-cards.patch b/src/angle/patches/0010-ANGLE-Enable-D3D11-for-feature-level-9-cards.patch
index 34c881ba21..297d5adc84 100644
--- a/src/angle/patches/0010-ANGLE-Enable-D3D11-for-feature-level-9-cards.patch
+++ b/src/angle/patches/0010-ANGLE-Enable-D3D11-for-feature-level-9-cards.patch
@@ -1,75 +1,239 @@
-From e84f947df4ae095eae600550749b3a4e8de5ee8b Mon Sep 17 00:00:00 2001
+From 0e8aa60332e17f284804dc1b89a9db5795a92ecb Mon Sep 17 00:00:00 2001
 From: Andrew Knight <andrew.knight@digia.com>
-Date: Thu, 20 Feb 2014 16:51:36 +0200
-Subject: [PATCH] ANGLE: Enable D3D11 for feature level 9 cards
+Date: Wed, 17 Sep 2014 21:17:39 +0300
+Subject: [PATCH 10/16] ANGLE: Enable D3D11 for feature level 9 cards
 
 Enable use of ANGLE on lower-end hardware, such as Surface RT and
 Windows Phone 8.
 
-Based on https://codereview.appspot.com/12917046/
-
 Change-Id: Ice536802e4eedc1d264abd0dd65960638fce59e4
 ---
- .../angle/src/libGLESv2/renderer/d3d11/Image11.cpp |  7 +-
- .../libGLESv2/renderer/d3d11/RenderStateCache.cpp  |  5 +-
- .../src/libGLESv2/renderer/d3d11/Renderer11.cpp    | 90 ++++++++++++++++++++--
- .../src/libGLESv2/renderer/d3d11/Renderer11.h      |  1 +
- .../libGLESv2/renderer/d3d11/TextureStorage11.cpp  | 10 +--
- .../libGLESv2/renderer/d3d11/renderer11_utils.cpp  |  4 +-
- .../libGLESv2/renderer/d3d11/renderer11_utils.h    |  2 +-
- 7 files changed, 100 insertions(+), 19 deletions(-)
+ src/3rdparty/angle/src/libGLESv2/angletypes.cpp    |   4 +-
+ .../src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp    |  73 +++----
+ .../src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp  |   4 +-
+ .../src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp   |   8 +-
+ .../renderer/d3d/d3d11/PixelTransfer11.cpp         |   7 +-
+ .../libGLESv2/renderer/d3d/d3d11/Renderer11.cpp    | 209 +++++++++++++--------
+ .../src/libGLESv2/renderer/d3d/d3d11/Renderer11.h  |   1 +
+ .../renderer/d3d/d3d11/TextureStorage11.cpp        |   2 +-
+ .../libGLESv2/renderer/d3d/d3d11/formatutils11.cpp |   4 +-
+ .../renderer/d3d/d3d11/renderer11_utils.cpp        |   2 +-
+ 10 files changed, 190 insertions(+), 124 deletions(-)
 
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp
-index 2b07b9d..5d039a3 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Image11.cpp
-@@ -142,7 +142,7 @@ bool Image11::redefine(Renderer *renderer, GLint internalformat, GLsizei width,
-         mHeight = height;
-         mInternalFormat = internalformat;
-         // compute the d3d format that will be used
--        mDXGIFormat = gl_d3d11::ConvertTextureFormat(internalformat);
-+        mDXGIFormat = gl_d3d11::ConvertTextureFormat(internalformat, mRenderer->getFeatureLevel());
-         mActualFormat = d3d11_gl::ConvertTextureInternalFormat(mDXGIFormat);
- 
-         if (mStagingTexture)
-@@ -191,7 +191,10 @@ void Image11::loadData(GLint xoffset, GLint yoffset, GLsizei width, GLsizei heig
-     switch (mInternalFormat)
+diff --git a/src/3rdparty/angle/src/libGLESv2/angletypes.cpp b/src/3rdparty/angle/src/libGLESv2/angletypes.cpp
+index 06618d5..bb6425d 100644
+--- a/src/3rdparty/angle/src/libGLESv2/angletypes.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/angletypes.cpp
+@@ -22,8 +22,8 @@ SamplerState::SamplerState()
+       maxAnisotropy(1.0f),
+       baseLevel(0),
+       maxLevel(1000),
+-      minLod(-1000.0f),
+-      maxLod(1000.0f),
++      minLod(-FLT_MAX),
++      maxLod(FLT_MAX),
+       compareMode(GL_NONE),
+       compareFunc(GL_LEQUAL),
+       swizzleRed(GL_RED),
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
+index 72820a4..d43e65e 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp
+@@ -209,7 +209,7 @@ Blit11::Blit11(rx::Renderer11 *renderer)
+     pointSamplerDesc.BorderColor[2] = 0.0f;
+     pointSamplerDesc.BorderColor[3] = 0.0f;
+     pointSamplerDesc.MinLOD = 0.0f;
+-    pointSamplerDesc.MaxLOD = 0.0f;
++    pointSamplerDesc.MaxLOD = mRenderer->isLevel9() ? FLT_MAX : 0.0f;
+ 
+     result = device->CreateSamplerState(&pointSamplerDesc, &mPointSampler);
+     ASSERT(SUCCEEDED(result));
+@@ -228,7 +228,7 @@ Blit11::Blit11(rx::Renderer11 *renderer)
+     linearSamplerDesc.BorderColor[2] = 0.0f;
+     linearSamplerDesc.BorderColor[3] = 0.0f;
+     linearSamplerDesc.MinLOD = 0.0f;
+-    linearSamplerDesc.MaxLOD = 0.0f;
++    linearSamplerDesc.MaxLOD = mRenderer->isLevel9() ? FLT_MAX : 0.0f;
+ 
+     result = device->CreateSamplerState(&linearSamplerDesc, &mLinearSampler);
+     ASSERT(SUCCEEDED(result));
+@@ -290,28 +290,31 @@ Blit11::Blit11(rx::Renderer11 *renderer)
+     ASSERT(SUCCEEDED(result));
+     d3d11::SetDebugName(mQuad2DVS, "Blit11 2D vertex shader");
+ 
+-    result = device->CreatePixelShader(g_PS_PassthroughDepth2D, ArraySize(g_PS_PassthroughDepth2D), NULL, &mDepthPS);
+-    ASSERT(SUCCEEDED(result));
+-    d3d11::SetDebugName(mDepthPS, "Blit11 2D depth pixel shader");
+-
+-    D3D11_INPUT_ELEMENT_DESC quad3DLayout[] =
++    if (!renderer->isLevel9())
      {
-       case GL_ALPHA8_EXT:
--        loadAlphaDataToNative(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-+        if (mRenderer->getFeatureLevel() >= D3D_FEATURE_LEVEL_10_0)
-+            loadAlphaDataToNative(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
-+        else
-+            loadAlphaDataToBGRA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData);
+-        { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT,    0,  0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+-        { "LAYER",    0, DXGI_FORMAT_R32_UINT,        0,  8, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+-        { "TEXCOORD", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 12, D3D11_INPUT_PER_VERTEX_DATA, 0 },
+-    };
+-
+-    result = device->CreateInputLayout(quad3DLayout, ArraySize(quad3DLayout), g_VS_Passthrough3D, ArraySize(g_VS_Passthrough3D), &mQuad3DIL);
+-    ASSERT(SUCCEEDED(result));
+-    d3d11::SetDebugName(mQuad3DIL, "Blit11 3D input layout");
++        result = device->CreatePixelShader(g_PS_PassthroughDepth2D, ArraySize(g_PS_PassthroughDepth2D), NULL, &mDepthPS);
++        ASSERT(SUCCEEDED(result));
++        d3d11::SetDebugName(mDepthPS, "Blit11 2D depth pixel shader");
+ 
+-    result = device->CreateVertexShader(g_VS_Passthrough3D, ArraySize(g_VS_Passthrough3D), NULL, &mQuad3DVS);
+-    ASSERT(SUCCEEDED(result));
+-    d3d11::SetDebugName(mQuad3DVS, "Blit11 3D vertex shader");
+-
+-    result = device->CreateGeometryShader(g_GS_Passthrough3D, ArraySize(g_GS_Passthrough3D), NULL, &mQuad3DGS);
+-    ASSERT(SUCCEEDED(result));
+-    d3d11::SetDebugName(mQuad3DGS, "Renderer11 copy 3D texture geometry shader");
++        D3D11_INPUT_ELEMENT_DESC quad3DLayout[] =
++        {
++            { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT,    0,  0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
++            { "LAYER",    0, DXGI_FORMAT_R32_UINT,        0,  8, D3D11_INPUT_PER_VERTEX_DATA, 0 },
++            { "TEXCOORD", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 12, D3D11_INPUT_PER_VERTEX_DATA, 0 },
++        };
++
++        result = device->CreateInputLayout(quad3DLayout, ArraySize(quad3DLayout), g_VS_Passthrough3D, ArraySize(g_VS_Passthrough3D), &mQuad3DIL);
++        ASSERT(SUCCEEDED(result));
++        d3d11::SetDebugName(mQuad3DIL, "Blit11 3D input layout");
++
++        result = device->CreateVertexShader(g_VS_Passthrough3D, ArraySize(g_VS_Passthrough3D), NULL, &mQuad3DVS);
++        ASSERT(SUCCEEDED(result));
++        d3d11::SetDebugName(mQuad3DVS, "Blit11 3D vertex shader");
++
++        result = device->CreateGeometryShader(g_GS_Passthrough3D, ArraySize(g_GS_Passthrough3D), NULL, &mQuad3DGS);
++        ASSERT(SUCCEEDED(result));
++        d3d11::SetDebugName(mQuad3DGS, "Renderer11 copy 3D texture geometry shader");
++    }
+ 
+     buildShaderMap();
+ 
+@@ -972,40 +975,44 @@ void Blit11::buildShaderMap()
+     ID3D11Device *device = mRenderer->getDevice();
+ 
+     add2DBlitShaderToMap(GL_RGBA,            false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2D,     "Blit11 2D RGBA pixel shader"           ));
+-    add2DBlitShaderToMap(GL_RGBA_INTEGER,    false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2DUI,   "Blit11 2D RGBA UI pixel shader"        ));
+-    add2DBlitShaderToMap(GL_RGBA_INTEGER,    true,  d3d11::CompilePS(device, g_PS_PassthroughRGBA2DI,    "Blit11 2D RGBA I pixel shader"         ));
+     add2DBlitShaderToMap(GL_BGRA_EXT,        false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2D,     "Blit11 2D BGRA pixel shader"           ));
+     add2DBlitShaderToMap(GL_RGB,             false, d3d11::CompilePS(device, g_PS_PassthroughRGB2D,      "Blit11 2D RGB pixel shader"            ));
+-    add2DBlitShaderToMap(GL_RGB_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughRGB2DUI,    "Blit11 2D RGB UI pixel shader"         ));
+-    add2DBlitShaderToMap(GL_RGB_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughRGB2DI,     "Blit11 2D RGB I pixel shader"          ));
+     add2DBlitShaderToMap(GL_RG,              false, d3d11::CompilePS(device, g_PS_PassthroughRG2D,       "Blit11 2D RG pixel shader"             ));
+-    add2DBlitShaderToMap(GL_RG_INTEGER,      false, d3d11::CompilePS(device, g_PS_PassthroughRG2DUI,     "Blit11 2D RG UI pixel shader"          ));
+-    add2DBlitShaderToMap(GL_RG_INTEGER,      true,  d3d11::CompilePS(device, g_PS_PassthroughRG2DI,      "Blit11 2D RG I pixel shader"           ));
+     add2DBlitShaderToMap(GL_RED,             false, d3d11::CompilePS(device, g_PS_PassthroughR2D,        "Blit11 2D R pixel shader"              ));
+-    add2DBlitShaderToMap(GL_RED_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughR2DUI,      "Blit11 2D R UI pixel shader"           ));
+-    add2DBlitShaderToMap(GL_RED_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughR2DI,       "Blit11 2D R I pixel shader"            ));
+     add2DBlitShaderToMap(GL_ALPHA,           false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2D,     "Blit11 2D alpha pixel shader"          ));
+     add2DBlitShaderToMap(GL_LUMINANCE,       false, d3d11::CompilePS(device, g_PS_PassthroughLum2D,      "Blit11 2D lum pixel shader"            ));
+     add2DBlitShaderToMap(GL_LUMINANCE_ALPHA, false, d3d11::CompilePS(device, g_PS_PassthroughLumAlpha2D, "Blit11 2D luminance alpha pixel shader"));
+ 
++    addSwizzleShaderToMap(GL_FLOAT,        D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleF2D,       "Blit11 2D F swizzle pixel shader" ));
++
++    if (mRenderer->isLevel9())
++        return;
++
++    add2DBlitShaderToMap(GL_RGBA_INTEGER,    false, d3d11::CompilePS(device, g_PS_PassthroughRGBA2DUI,   "Blit11 2D RGBA UI pixel shader"        ));
++    add2DBlitShaderToMap(GL_RGBA_INTEGER,    true,  d3d11::CompilePS(device, g_PS_PassthroughRGBA2DI,    "Blit11 2D RGBA I pixel shader"         ));
++    add2DBlitShaderToMap(GL_RGB_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughRGB2DUI,    "Blit11 2D RGB UI pixel shader"         ));
++    add2DBlitShaderToMap(GL_RGB_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughRGB2DI,     "Blit11 2D RGB I pixel shader"          ));
++    add2DBlitShaderToMap(GL_RG_INTEGER,      false, d3d11::CompilePS(device, g_PS_PassthroughRG2DUI,     "Blit11 2D RG UI pixel shader"          ));
++    add2DBlitShaderToMap(GL_RG_INTEGER,      true,  d3d11::CompilePS(device, g_PS_PassthroughRG2DI,      "Blit11 2D RG I pixel shader"           ));
++    add2DBlitShaderToMap(GL_RED_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughR2DUI,      "Blit11 2D R UI pixel shader"           ));
++    add2DBlitShaderToMap(GL_RED_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughR2DI,       "Blit11 2D R I pixel shader"            ));
+     add3DBlitShaderToMap(GL_RGBA,            false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3D,     "Blit11 3D RGBA pixel shader"           ));
+     add3DBlitShaderToMap(GL_RGBA_INTEGER,    false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3DUI,   "Blit11 3D UI RGBA pixel shader"        ));
+     add3DBlitShaderToMap(GL_RGBA_INTEGER,    true,  d3d11::CompilePS(device, g_PS_PassthroughRGBA3DI,    "Blit11 3D I RGBA pixel shader"         ));
+     add3DBlitShaderToMap(GL_BGRA_EXT,        false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3D,     "Blit11 3D BGRA pixel shader"           ));
+     add3DBlitShaderToMap(GL_RGB,             false, d3d11::CompilePS(device, g_PS_PassthroughRGB3D,      "Blit11 3D RGB pixel shader"            ));
++    add3DBlitShaderToMap(GL_RG,              false, d3d11::CompilePS(device, g_PS_PassthroughRG3D,       "Blit11 3D RG pixel shader"             ));
+     add3DBlitShaderToMap(GL_RGB_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughRGB3DUI,    "Blit11 3D RGB UI pixel shader"         ));
+     add3DBlitShaderToMap(GL_RGB_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughRGB3DI,     "Blit11 3D RGB I pixel shader"          ));
+-    add3DBlitShaderToMap(GL_RG,              false, d3d11::CompilePS(device, g_PS_PassthroughRG3D,       "Blit11 3D RG pixel shader"             ));
++    add3DBlitShaderToMap(GL_RED,             false, d3d11::CompilePS(device, g_PS_PassthroughR3D,        "Blit11 3D R pixel shader"              ));
+     add3DBlitShaderToMap(GL_RG_INTEGER,      false, d3d11::CompilePS(device, g_PS_PassthroughRG3DUI,     "Blit11 3D RG UI pixel shader"          ));
+     add3DBlitShaderToMap(GL_RG_INTEGER,      true,  d3d11::CompilePS(device, g_PS_PassthroughRG3DI,      "Blit11 3D RG I pixel shader"           ));
+-    add3DBlitShaderToMap(GL_RED,             false, d3d11::CompilePS(device, g_PS_PassthroughR3D,        "Blit11 3D R pixel shader"              ));
+     add3DBlitShaderToMap(GL_RED_INTEGER,     false, d3d11::CompilePS(device, g_PS_PassthroughR3DUI,      "Blit11 3D R UI pixel shader"           ));
+     add3DBlitShaderToMap(GL_RED_INTEGER,     true,  d3d11::CompilePS(device, g_PS_PassthroughR3DI,       "Blit11 3D R I pixel shader"            ));
+     add3DBlitShaderToMap(GL_ALPHA,           false, d3d11::CompilePS(device, g_PS_PassthroughRGBA3D,     "Blit11 3D alpha pixel shader"          ));
+     add3DBlitShaderToMap(GL_LUMINANCE,       false, d3d11::CompilePS(device, g_PS_PassthroughLum3D,      "Blit11 3D luminance pixel shader"      ));
+     add3DBlitShaderToMap(GL_LUMINANCE_ALPHA, false, d3d11::CompilePS(device, g_PS_PassthroughLumAlpha3D, "Blit11 3D luminance alpha pixel shader"));
+ 
+-    addSwizzleShaderToMap(GL_FLOAT,        D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleF2D,       "Blit11 2D F swizzle pixel shader" ));
+     addSwizzleShaderToMap(GL_UNSIGNED_INT, D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleUI2D,      "Blit11 2D UI swizzle pixel shader"));
+     addSwizzleShaderToMap(GL_INT,          D3D_SRV_DIMENSION_TEXTURE2D,      d3d11::CompilePS(device, g_PS_SwizzleI2D,       "Blit11 2D I swizzle pixel shader" ));
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp
+index 43ce5ba..ecd4d46 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp
+@@ -747,7 +747,9 @@ void Buffer11::NativeBuffer11::fillBufferDesc(D3D11_BUFFER_DESC* bufferDesc, Ren
+ 
+       case BUFFER_USAGE_VERTEX_OR_TRANSFORM_FEEDBACK:
+         bufferDesc->Usage = D3D11_USAGE_DEFAULT;
+-        bufferDesc->BindFlags = D3D11_BIND_VERTEX_BUFFER | D3D11_BIND_STREAM_OUTPUT;
++        bufferDesc->BindFlags = D3D11_BIND_VERTEX_BUFFER;
++        if (!static_cast<Renderer11 *>(renderer)->isLevel9())
++            bufferDesc->BindFlags |= D3D11_BIND_STREAM_OUTPUT;
+         bufferDesc->CPUAccessFlags = 0;
          break;
-       case GL_LUMINANCE8_EXT:
-         loadLuminanceDataToNativeOrBGRA(width, height, inputPitch, input, mappedImage.RowPitch, offsetMappedData, false);
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp
-index 0047e04..a1c324c 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp
-@@ -419,7 +419,8 @@ ID3D11SamplerState *RenderStateCache::getSamplerState(const gl::SamplerState &sa
-         samplerDesc.BorderColor[2] = 0.0f;
-         samplerDesc.BorderColor[3] = 0.0f;
-         samplerDesc.MinLOD = gl_d3d11::ConvertMinLOD(samplerState.minFilter, samplerState.lodOffset);
--        samplerDesc.MaxLOD = gl_d3d11::ConvertMaxLOD(samplerState.minFilter, samplerState.lodOffset);
-+        samplerDesc.MaxLOD = mDevice->GetFeatureLevel() >= D3D_FEATURE_LEVEL_10_0
-+                ? gl_d3d11::ConvertMaxLOD(samplerState.minFilter, samplerState.lodOffset) : FLT_MAX;
- 
-         ID3D11SamplerState *dx11SamplerState = NULL;
-         HRESULT result = mDevice->CreateSamplerState(&samplerDesc, &dx11SamplerState);
-@@ -435,4 +436,4 @@ ID3D11SamplerState *RenderStateCache::getSamplerState(const gl::SamplerState &sa
-     }
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
+index 5caa427..765d34f 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp
+@@ -104,7 +104,7 @@ Clear11::Clear11(Renderer11 *renderer)
+     rsDesc.DepthBias = 0;
+     rsDesc.DepthBiasClamp = 0.0f;
+     rsDesc.SlopeScaledDepthBias = 0.0f;
+-    rsDesc.DepthClipEnable = FALSE;
++    rsDesc.DepthClipEnable = mRenderer->isLevel9();
+     rsDesc.ScissorEnable = FALSE;
+     rsDesc.MultisampleEnable = FALSE;
+     rsDesc.AntialiasedLineEnable = FALSE;
+@@ -114,6 +114,12 @@ Clear11::Clear11(Renderer11 *renderer)
+     d3d11::SetDebugName(mRasterizerState, "Clear11 masked clear rasterizer state");
+ 
+     mFloatClearShader = CreateClearShader(device, DXGI_FORMAT_R32G32B32A32_FLOAT, g_VS_ClearFloat, g_PS_ClearFloat);
++    if (mRenderer->isLevel9()) {
++        memset(&mUintClearShader, 0, sizeof(ClearShader));
++        memset(&mIntClearShader, 0, sizeof(ClearShader));
++        return;
++    }
++
+     mUintClearShader  = CreateClearShader(device, DXGI_FORMAT_R32G32B32A32_UINT,  g_VS_ClearUint,  g_PS_ClearUint );
+     mIntClearShader   = CreateClearShader(device, DXGI_FORMAT_R32G32B32A32_SINT,  g_VS_ClearSint,  g_PS_ClearSint );
  }
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
+index edaafec..a4e84f9 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp
+@@ -88,13 +88,16 @@ PixelTransfer11::PixelTransfer11(Renderer11 *renderer)
+     ASSERT(SUCCEEDED(result));
+     d3d11::SetDebugName(mParamsConstantBuffer, "PixelTransfer11 constant buffer");
  
--}
-\ No newline at end of file
-+}
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-index 7f166fd..31d976d 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-@@ -164,6 +164,11 @@ EGLint Renderer11::initialize()
++    StructZero(&mParamsData);
++
+     // init shaders
++    if (mRenderer->isLevel9())
++        return;
++
+     mBufferToTextureVS = d3d11::CompileVS(device, g_VS_BufferToTexture, "BufferToTexture VS");
+     mBufferToTextureGS = d3d11::CompileGS(device, g_GS_BufferToTexture, "BufferToTexture GS");
+ 
+     buildShaderMap();
+-
+-    StructZero(&mParamsData);
+ }
+ 
+ PixelTransfer11::~PixelTransfer11()
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+index 0bb7489..b4b26a8 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+@@ -162,6 +162,11 @@ EGLint Renderer11::initialize()
          D3D_FEATURE_LEVEL_11_0,
          D3D_FEATURE_LEVEL_10_1,
          D3D_FEATURE_LEVEL_10_0,
@@ -80,8 +244,248 @@ index 7f166fd..31d976d 100644
 +#endif
      };
  
-     HRESULT result = S_OK;
-@@ -1533,7 +1538,7 @@ void Renderer11::applyUniforms(gl::ProgramBinary *programBinary, gl::UniformArra
+     D3D_DRIVER_TYPE driverType = D3D_DRIVER_TYPE_HARDWARE;
+@@ -1112,6 +1117,84 @@ gl::Error Renderer11::drawElements(GLenum mode, GLsizei count, GLenum type, cons
+     }
+ }
+ 
++template<typename T>
++static void fillLineLoopIndices(GLenum type, GLsizei count, const GLvoid *indices, T *data)
++{
++    switch (type)
++    {
++      case GL_NONE:   // Non-indexed draw
++        for (int i = 0; i < count; i++)
++        {
++            data[i] = i;
++        }
++        data[count] = 0;
++        break;
++      case GL_UNSIGNED_BYTE:
++        for (int i = 0; i < count; i++)
++        {
++            data[i] = static_cast<const GLubyte*>(indices)[i];
++        }
++        data[count] = static_cast<const GLubyte*>(indices)[0];
++        break;
++      case GL_UNSIGNED_SHORT:
++        for (int i = 0; i < count; i++)
++        {
++            data[i] = static_cast<const GLushort*>(indices)[i];
++        }
++        data[count] = static_cast<const GLushort*>(indices)[0];
++        break;
++      case GL_UNSIGNED_INT:
++        for (int i = 0; i < count; i++)
++        {
++            data[i] = static_cast<const GLuint*>(indices)[i];
++        }
++        data[count] = static_cast<const GLuint*>(indices)[0];
++        break;
++      default: UNREACHABLE();
++    }
++}
++
++template<typename T>
++static void fillTriangleFanIndices(GLenum type, unsigned int numTris, const GLvoid *indices, T *data)
++{
++    switch (type)
++    {
++      case GL_NONE:   // Non-indexed draw
++        for (unsigned int i = 0; i < numTris; i++)
++        {
++            data[i*3 + 0] = 0;
++            data[i*3 + 1] = i + 1;
++            data[i*3 + 2] = i + 2;
++        }
++        break;
++      case GL_UNSIGNED_BYTE:
++        for (unsigned int i = 0; i < numTris; i++)
++        {
++            data[i*3 + 0] = static_cast<const GLubyte*>(indices)[0];
++            data[i*3 + 1] = static_cast<const GLubyte*>(indices)[i + 1];
++            data[i*3 + 2] = static_cast<const GLubyte*>(indices)[i + 2];
++        }
++        break;
++      case GL_UNSIGNED_SHORT:
++        for (unsigned int i = 0; i < numTris; i++)
++        {
++            data[i*3 + 0] = static_cast<const GLushort*>(indices)[0];
++            data[i*3 + 1] = static_cast<const GLushort*>(indices)[i + 1];
++            data[i*3 + 2] = static_cast<const GLushort*>(indices)[i + 2];
++        }
++        break;
++      case GL_UNSIGNED_INT:
++        for (unsigned int i = 0; i < numTris; i++)
++        {
++            data[i*3 + 0] = static_cast<const GLuint*>(indices)[0];
++            data[i*3 + 1] = static_cast<const GLuint*>(indices)[i + 1];
++            data[i*3 + 2] = static_cast<const GLuint*>(indices)[i + 2];
++        }
++        break;
++      default: UNREACHABLE();
++    }
++}
++
+ gl::Error Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
+ {
+     // Get the raw indices for an indexed draw
+@@ -1123,10 +1206,13 @@ gl::Error Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *ind
+         indices = static_cast<const GLubyte*>(storage->getData()) + offset;
+     }
+ 
++    // TODO: some level 9 hardware supports 32-bit indices; test and store support instead
++    const int indexType = isLevel9() ? GL_UNSIGNED_SHORT : GL_UNSIGNED_INT;
++
+     if (!mLineLoopIB)
+     {
+         mLineLoopIB = new StreamingIndexBufferInterface(this);
+-        gl::Error error = mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT);
++        gl::Error error = mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType);
+         if (error.isError())
+         {
+             SafeDelete(mLineLoopIB);
+@@ -1137,7 +1223,8 @@ gl::Error Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *ind
+     // Checked by Renderer11::applyPrimitiveType
+     ASSERT(count >= 0);
+ 
+-    if (static_cast<unsigned int>(count) + 1 > (std::numeric_limits<unsigned int>::max() / sizeof(unsigned int)))
++    int indexTypeSize = indexType == GL_UNSIGNED_SHORT ? sizeof(unsigned short) : sizeof(unsigned int);
++    if (static_cast<unsigned int>(count) + 1 > (std::numeric_limits<unsigned int>::max() / indexTypeSize))
+     {
+         return gl::Error(GL_OUT_OF_MEMORY, "Failed to create a 32-bit looping index buffer for GL_LINE_LOOP, too many indices required.");
+     }
+@@ -1157,42 +1244,12 @@ gl::Error Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *ind
+         return error;
+     }
+ 
+-    unsigned int *data = reinterpret_cast<unsigned int*>(mappedMemory);
++    if (indexType == GL_UNSIGNED_SHORT)
++        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned short*>(mappedMemory));
++    else
++        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned int*>(mappedMemory));
+     unsigned int indexBufferOffset = offset;
+ 
+-    switch (type)
+-    {
+-      case GL_NONE:   // Non-indexed draw
+-        for (int i = 0; i < count; i++)
+-        {
+-            data[i] = i;
+-        }
+-        data[count] = 0;
+-        break;
+-      case GL_UNSIGNED_BYTE:
+-        for (int i = 0; i < count; i++)
+-        {
+-            data[i] = static_cast<const GLubyte*>(indices)[i];
+-        }
+-        data[count] = static_cast<const GLubyte*>(indices)[0];
+-        break;
+-      case GL_UNSIGNED_SHORT:
+-        for (int i = 0; i < count; i++)
+-        {
+-            data[i] = static_cast<const GLushort*>(indices)[i];
+-        }
+-        data[count] = static_cast<const GLushort*>(indices)[0];
+-        break;
+-      case GL_UNSIGNED_INT:
+-        for (int i = 0; i < count; i++)
+-        {
+-            data[i] = static_cast<const GLuint*>(indices)[i];
+-        }
+-        data[count] = static_cast<const GLuint*>(indices)[0];
+-        break;
+-      default: UNREACHABLE();
+-    }
+-
+     error = mLineLoopIB->unmapBuffer();
+     if (error.isError())
+     {
+@@ -1227,10 +1284,12 @@ gl::Error Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *
+         indices = static_cast<const GLubyte*>(storage->getData()) + offset;
+     }
+ 
++    const int indexType = isLevel9() ? GL_UNSIGNED_SHORT : GL_UNSIGNED_INT;
++
+     if (!mTriangleFanIB)
+     {
+         mTriangleFanIB = new StreamingIndexBufferInterface(this);
+-        gl::Error error = mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT);
++        gl::Error error = mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType);
+         if (error.isError())
+         {
+             SafeDelete(mTriangleFanIB);
+@@ -1243,13 +1302,14 @@ gl::Error Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *
+ 
+     const unsigned int numTris = count - 2;
+ 
+-    if (numTris > (std::numeric_limits<unsigned int>::max() / (sizeof(unsigned int) * 3)))
++    int indexTypeSize = indexType == GL_UNSIGNED_SHORT ? sizeof(unsigned short) : sizeof(unsigned int);
++    if (numTris > (std::numeric_limits<unsigned int>::max() / (indexTypeSize * 3)))
+     {
+         return gl::Error(GL_OUT_OF_MEMORY, "Failed to create a scratch index buffer for GL_TRIANGLE_FAN, too many indices required.");
+     }
+ 
+-    const unsigned int spaceNeeded = (numTris * 3) * sizeof(unsigned int);
+-    gl::Error error = mTriangleFanIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT);
++    const unsigned int spaceNeeded = (numTris * 3) * indexTypeSize;
++    gl::Error error = mTriangleFanIB->reserveBufferSpace(spaceNeeded, indexType);
+     if (error.isError())
+     {
+         return error;
+@@ -1263,45 +1323,12 @@ gl::Error Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *
+         return error;
+     }
+ 
+-    unsigned int *data = reinterpret_cast<unsigned int*>(mappedMemory);
+-    unsigned int indexBufferOffset = offset;
++    if (indexType == GL_UNSIGNED_SHORT)
++        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned short*>(mappedMemory));
++    else
++        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned int*>(mappedMemory));
+ 
+-    switch (type)
+-    {
+-      case GL_NONE:   // Non-indexed draw
+-        for (unsigned int i = 0; i < numTris; i++)
+-        {
+-            data[i*3 + 0] = 0;
+-            data[i*3 + 1] = i + 1;
+-            data[i*3 + 2] = i + 2;
+-        }
+-        break;
+-      case GL_UNSIGNED_BYTE:
+-        for (unsigned int i = 0; i < numTris; i++)
+-        {
+-            data[i*3 + 0] = static_cast<const GLubyte*>(indices)[0];
+-            data[i*3 + 1] = static_cast<const GLubyte*>(indices)[i + 1];
+-            data[i*3 + 2] = static_cast<const GLubyte*>(indices)[i + 2];
+-        }
+-        break;
+-      case GL_UNSIGNED_SHORT:
+-        for (unsigned int i = 0; i < numTris; i++)
+-        {
+-            data[i*3 + 0] = static_cast<const GLushort*>(indices)[0];
+-            data[i*3 + 1] = static_cast<const GLushort*>(indices)[i + 1];
+-            data[i*3 + 2] = static_cast<const GLushort*>(indices)[i + 2];
+-        }
+-        break;
+-      case GL_UNSIGNED_INT:
+-        for (unsigned int i = 0; i < numTris; i++)
+-        {
+-            data[i*3 + 0] = static_cast<const GLuint*>(indices)[0];
+-            data[i*3 + 1] = static_cast<const GLuint*>(indices)[i + 1];
+-            data[i*3 + 2] = static_cast<const GLuint*>(indices)[i + 2];
+-        }
+-        break;
+-      default: UNREACHABLE();
+-    }
++    unsigned int indexBufferOffset = offset;
+ 
+     error = mTriangleFanIB->unmapBuffer();
+     if (error.isError())
+@@ -1549,7 +1576,7 @@ gl::Error Renderer11::applyUniforms(const gl::ProgramBinary &programBinary)
      }
  
      // needed for the point sprite geometry shader
@@ -90,7 +494,7 @@ index 7f166fd..31d976d 100644
      {
          mDeviceContext->GSSetConstantBuffers(0, 1, &mDriverConstantBufferPS);
          mCurrentGeometryConstantBuffer = mDriverConstantBufferPS;
-@@ -1956,6 +1961,11 @@ bool Renderer11::testDeviceResettable()
+@@ -1711,6 +1738,11 @@ bool Renderer11::testDeviceResettable()
          D3D_FEATURE_LEVEL_11_0,
          D3D_FEATURE_LEVEL_10_1,
          D3D_FEATURE_LEVEL_10_0,
@@ -102,325 +506,106 @@ index 7f166fd..31d976d 100644
      };
  
      ID3D11Device* dummyDevice;
-@@ -2139,6 +2149,11 @@ float Renderer11::getTextureMaxAnisotropy() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return D3D10_MAX_MAXANISOTROPY;
-+      case D3D_FEATURE_LEVEL_9_3:
-+      case D3D_FEATURE_LEVEL_9_2:
-+        return 16;
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return D3D_FL9_1_DEFAULT_MAX_ANISOTROPY;
-       default: UNREACHABLE();
-         return 0;
-     }
-@@ -2158,6 +2173,11 @@ Range Renderer11::getViewportBounds() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return Range(D3D10_VIEWPORT_BOUNDS_MIN, D3D10_VIEWPORT_BOUNDS_MAX);
-+      case D3D_FEATURE_LEVEL_9_3:
-+        return Range(D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION * -2, D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION * 2);
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return Range(D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION * -2, D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION * 2);
-       default: UNREACHABLE();
-         return Range(0, 0);
-     }
-@@ -2172,6 +2192,10 @@ unsigned int Renderer11::getMaxVertexTextureImageUnits() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return MAX_TEXTURE_IMAGE_UNITS_VTF_SM4;
-+      case D3D_FEATURE_LEVEL_9_3:
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return 0;
-       default: UNREACHABLE();
-         return 0;
-     }
-@@ -2195,14 +2219,14 @@ unsigned int Renderer11::getReservedFragmentUniformVectors() const
- unsigned int Renderer11::getMaxVertexUniformVectors() const
- {
-     META_ASSERT(MAX_VERTEX_UNIFORM_VECTORS_D3D11 <= D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT);
--    ASSERT(mFeatureLevel >= D3D_FEATURE_LEVEL_10_0);
-+    ASSERT(mFeatureLevel >= D3D_FEATURE_LEVEL_9_1);
-     return MAX_VERTEX_UNIFORM_VECTORS_D3D11;
- }
- 
- unsigned int Renderer11::getMaxFragmentUniformVectors() const
- {
-     META_ASSERT(MAX_FRAGMENT_UNIFORM_VECTORS_D3D11 <= D3D10_REQ_CONSTANT_BUFFER_ELEMENT_COUNT);
--    ASSERT(mFeatureLevel >= D3D_FEATURE_LEVEL_10_0);
-+    ASSERT(mFeatureLevel >= D3D_FEATURE_LEVEL_9_1);
-     return MAX_FRAGMENT_UNIFORM_VECTORS_D3D11;
- }
- 
-@@ -2216,6 +2240,10 @@ unsigned int Renderer11::getMaxVaryingVectors() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return D3D10_VS_OUTPUT_REGISTER_COUNT;
-+      case D3D_FEATURE_LEVEL_9_3:
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return 8;
-       default: UNREACHABLE();
-         return 0;
-     }
-@@ -2229,6 +2257,10 @@ bool Renderer11::getNonPower2TextureSupport() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return true;
-+      case D3D_FEATURE_LEVEL_9_3:
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return false;
-       default: UNREACHABLE();
-         return false;
-     }
-@@ -2242,6 +2274,11 @@ bool Renderer11::getOcclusionQuerySupport() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return true;
-+      case D3D_FEATURE_LEVEL_9_3:
-+      case D3D_FEATURE_LEVEL_9_2:
-+        return true;
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return false;
-       default: UNREACHABLE();
-         return false;
-     }
-@@ -2254,7 +2291,11 @@ bool Renderer11::getInstancingSupport() const
-       case D3D_FEATURE_LEVEL_11_0:
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
--        return true;
-+      case D3D_FEATURE_LEVEL_9_3:
-+         return true;
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return false;
-       default: UNREACHABLE();
-         return false;
-     }
-@@ -2276,6 +2317,11 @@ bool Renderer11::getDerivativeInstructionSupport() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-         return true;
-+      case D3D_FEATURE_LEVEL_9_3:
-+        return true;
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:
-+        return false;
-       default: UNREACHABLE();
-         return false;
-     }
-@@ -2294,6 +2340,9 @@ int Renderer11::getMajorShaderModel() const
+@@ -1862,7 +1894,10 @@ int Renderer11::getMajorShaderModel() const
+     {
        case D3D_FEATURE_LEVEL_11_0: return D3D11_SHADER_MAJOR_VERSION;   // 5
        case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SHADER_MAJOR_VERSION; // 4
-       case D3D_FEATURE_LEVEL_10_0: return D3D10_SHADER_MAJOR_VERSION;   // 4
+-      case D3D_FEATURE_LEVEL_10_0: return D3D10_SHADER_MAJOR_VERSION;   // 4
++      case D3D_FEATURE_LEVEL_10_0:
 +      case D3D_FEATURE_LEVEL_9_3:
 +      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MAJOR_VERSION;   // 4 (level 9)
++      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MAJOR_VERSION;   // 4
        default: UNREACHABLE();      return 0;
      }
  }
-@@ -2305,6 +2354,9 @@ int Renderer11::getMinorShaderModel() const
+@@ -1873,7 +1908,10 @@ int Renderer11::getMinorShaderModel() const
+     {
        case D3D_FEATURE_LEVEL_11_0: return D3D11_SHADER_MINOR_VERSION;   // 0
        case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SHADER_MINOR_VERSION; // 1
-       case D3D_FEATURE_LEVEL_10_0: return D3D10_SHADER_MINOR_VERSION;   // 0
+-      case D3D_FEATURE_LEVEL_10_0: return D3D10_SHADER_MINOR_VERSION;   // 0
++      case D3D_FEATURE_LEVEL_10_0:
 +      case D3D_FEATURE_LEVEL_9_3:
 +      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MINOR_VERSION;   // 0 (level 9)
++      case D3D_FEATURE_LEVEL_9_1:  return D3D10_SHADER_MINOR_VERSION;   // 0
        default: UNREACHABLE();      return 0;
      }
  }
-@@ -2330,6 +2382,11 @@ int Renderer11::getMaxViewportDimension() const
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0: 
-         return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 8192
+@@ -2387,6 +2425,15 @@ ShaderExecutable *Renderer11::compileToExecutable(gl::InfoLog &infoLog, const ch
+       case D3D_FEATURE_LEVEL_10_0:
+         profileVersion = "4_0";
+         break;
 +      case D3D_FEATURE_LEVEL_9_3:
-+        return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 4096
++        profileVersion = "4_0_level_9_3";
++        break;
 +      case D3D_FEATURE_LEVEL_9_2:
++        profileVersion = "4_0_level_9_2";
++        break;
 +      case D3D_FEATURE_LEVEL_9_1:
-+        return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 2048
-       default: UNREACHABLE();      
-         return 0;
-     }
-@@ -2342,6 +2399,9 @@ int Renderer11::getMaxTextureWidth() const
-       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 16384
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 8192
-+      case D3D_FEATURE_LEVEL_9_3: return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 4096
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1: return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 2048
-       default: UNREACHABLE();      return 0;
-     }
- }
-@@ -2353,6 +2413,9 @@ int Renderer11::getMaxTextureHeight() const
-       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 16384
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_TEXTURE2D_U_OR_V_DIMENSION;   // 8192
-+      case D3D_FEATURE_LEVEL_9_3: return D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 4096
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1: return D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION; // 2048
-       default: UNREACHABLE();      return 0;
-     }
- }
-@@ -2364,6 +2427,9 @@ bool Renderer11::get32BitIndexSupport() const
-       case D3D_FEATURE_LEVEL_11_0: 
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0: return D3D10_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP >= 32;   // true
-+      case D3D_FEATURE_LEVEL_9_3:
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1:  return false;
-       default: UNREACHABLE();      return false;
-     }
- }
-@@ -2410,6 +2476,8 @@ unsigned int Renderer11::getMaxRenderTargets() const
- {
-     META_ASSERT(D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-     META_ASSERT(D3D10_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-+    META_ASSERT(D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
-+    META_ASSERT(D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT <= gl::IMPLEMENTATION_MAX_DRAW_BUFFERS);
- 
-     switch (mFeatureLevel)
-     {
-@@ -2417,6 +2485,9 @@ unsigned int Renderer11::getMaxRenderTargets() const
-         return D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT;  // 8
-       case D3D_FEATURE_LEVEL_10_1:
-       case D3D_FEATURE_LEVEL_10_0:
-+      case D3D_FEATURE_LEVEL_9_3: //  return D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT; // 4
-+      case D3D_FEATURE_LEVEL_9_2:
-+      case D3D_FEATURE_LEVEL_9_1: //  return D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT; // 1
-         // Feature level 10.0 and 10.1 cards perform very poorly when the pixel shader
-         // outputs to multiple RTs that are not bound.
-         // TODO: Remove pixel shader outputs for render targets that are not bound.
-@@ -2603,7 +2674,7 @@ bool Renderer11::copyTexture(ID3D11ShaderResourceView *source, const gl::Rectang
-         samplerDesc.BorderColor[2] = 0.0f;
-         samplerDesc.BorderColor[3] = 0.0f;
-         samplerDesc.MinLOD = 0.0f;
--        samplerDesc.MaxLOD = 0.0f;
-+        samplerDesc.MaxLOD = mDevice->GetFeatureLevel() >= D3D_FEATURE_LEVEL_10_0 ? 0.0f : FLT_MAX;
- 
-         result = mDevice->CreateSamplerState(&samplerDesc, &mCopySampler);
-         ASSERT(SUCCEEDED(result));
-@@ -2848,7 +2919,7 @@ ShaderExecutable *Renderer11::loadExecutable(const void *function, size_t length
- 
- ShaderExecutable *Renderer11::compileToExecutable(gl::InfoLog &infoLog, const char *shaderHLSL, rx::ShaderType type, D3DWorkaroundType workaround)
- {
--    const char *profile = NULL;
-+    std::string profile;
- 
-     switch (type)
-     {
-@@ -2866,7 +2937,12 @@ ShaderExecutable *Renderer11::compileToExecutable(gl::InfoLog &infoLog, const ch
-         return NULL;
-     }
- 
--    ID3DBlob *binary = (ID3DBlob*)compileToBinary(infoLog, shaderHLSL, profile, D3DCOMPILE_OPTIMIZATION_LEVEL0, false);
-+    if (mFeatureLevel == D3D_FEATURE_LEVEL_9_3)
-+        profile += "_level_9_3";
-+    else if (mFeatureLevel == D3D_FEATURE_LEVEL_9_2 || mFeatureLevel == D3D_FEATURE_LEVEL_9_1)
-+        profile += "_level_9_1";
-+
-+    ID3DBlob *binary = (ID3DBlob*)compileToBinary(infoLog, shaderHLSL, profile.c_str(), D3DCOMPILE_OPTIMIZATION_LEVEL0, false);
-     if (!binary)
++        profileVersion = "4_0_level_9_1";
++        break;
+       default:
+         UNREACHABLE();
          return NULL;
- 
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-index ba3f0c6..a8a722c 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-@@ -177,6 +177,7 @@ class Renderer11 : public Renderer
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
+index b86f5e5..2a53fa1 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h
+@@ -184,6 +184,7 @@ class Renderer11 : public Renderer
      ID3D11Device *getDevice() { return mDevice; }
      ID3D11DeviceContext *getDeviceContext() { return mDeviceContext; };
      IDXGIFactory *getDxgiFactory() { return mDxgiFactory; };
-+    D3D_FEATURE_LEVEL getFeatureLevel() { return mFeatureLevel; }
- 
-     bool getRenderTargetResource(gl::Renderbuffer *colorbuffer, unsigned int *subresourceIndex, ID3D11Texture2D **resource);
-     void unapplyRenderTargets();
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
-index 5f6ea21..fdfbe52 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
-@@ -222,14 +222,14 @@ TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, SwapChain11 *swapch
- }
++    bool isLevel9() { return mFeatureLevel <= D3D_FEATURE_LEVEL_9_3; }
  
- TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, GLsizei width, GLsizei height)
--    : TextureStorage11(renderer, GetTextureBindFlags(gl_d3d11::ConvertTextureFormat(internalformat), usage, forceRenderable))
-+    : TextureStorage11(renderer, GetTextureBindFlags(gl_d3d11::ConvertTextureFormat(internalformat, Renderer11::makeRenderer11(renderer)->getFeatureLevel()), usage, forceRenderable))
- {
-     for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_TEXTURE_LEVELS; i++)
-     {
-         mRenderTarget[i] = NULL;
-     }
+     Blit11 *getBlitter() { return mBlit; }
  
--    DXGI_FORMAT convertedFormat = gl_d3d11::ConvertTextureFormat(internalformat);
-+    DXGI_FORMAT convertedFormat = gl_d3d11::ConvertTextureFormat(internalformat, mRenderer->getFeatureLevel());
-     if (d3d11::IsDepthStencilFormat(convertedFormat))
-     {
-         mTextureFormat = d3d11::GetDepthTextureFormat(convertedFormat);
-@@ -331,7 +331,7 @@ RenderTarget *TextureStorage11_2D::getRenderTarget(int level)
-             srvDesc.Format = mShaderResourceFormat;
-             srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D;
-             srvDesc.Texture2D.MostDetailedMip = level;
--            srvDesc.Texture2D.MipLevels = 1;
-+            srvDesc.Texture2D.MipLevels = level ? 1 : -1;
- 
-             ID3D11ShaderResourceView *srv;
-             result = device->CreateShaderResourceView(mTexture, &srvDesc, &srv);
-@@ -440,7 +440,7 @@ void TextureStorage11_2D::generateMipmap(int level)
- }
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp
+index 3f0cd5b..91e7147 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp
+@@ -472,7 +472,7 @@ TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, GLenum internalform
+         D3D11_TEXTURE2D_DESC desc;
+         desc.Width = width;      // Compressed texture size constraints?
+         desc.Height = height;
+-        desc.MipLevels = ((levels > 0) ? (mTopLevel + levels) : 0);
++        desc.MipLevels = desc.MipLevels = mRenderer->isLevel9() ? 1 : ((levels > 0) ? (mTopLevel + levels) : 0);
+         desc.ArraySize = 1;
+         desc.Format = mTextureFormat;
+         desc.SampleDesc.Count = 1;
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp
+index 1ea916d..c078287 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp
+@@ -557,7 +557,7 @@ D3D11LoadFunctionMap BuildD3D11LoadFunctionMap()
+     InsertLoadFunction(&map, GL_ALPHA,              GL_HALF_FLOAT_OES,                 LoadA16FToRGBA16F                    );
  
- TextureStorage11_Cube::TextureStorage11_Cube(Renderer *renderer, int levels, GLenum internalformat, GLenum usage, bool forceRenderable, int size)
--    : TextureStorage11(renderer, GetTextureBindFlags(gl_d3d11::ConvertTextureFormat(internalformat), usage, forceRenderable))
-+    : TextureStorage11(renderer, GetTextureBindFlags(gl_d3d11::ConvertTextureFormat(internalformat, Renderer11::makeRenderer11(renderer)->getFeatureLevel()), usage, forceRenderable))
- {
-     for (unsigned int i = 0; i < 6; i++)
-     {
-@@ -450,7 +450,7 @@ TextureStorage11_Cube::TextureStorage11_Cube(Renderer *renderer, int levels, GLe
-         }
-     }
+     // From GL_EXT_texture_storage
+-    InsertLoadFunction(&map, GL_ALPHA8_EXT,             GL_UNSIGNED_BYTE,              LoadToNative<GLubyte, 1>             );
++    InsertLoadFunction(&map, GL_ALPHA8_EXT,             GL_UNSIGNED_BYTE,              LoadA8ToRGBA8                        );
+     InsertLoadFunction(&map, GL_LUMINANCE8_EXT,         GL_UNSIGNED_BYTE,              LoadL8ToRGBA8                        );
+     InsertLoadFunction(&map, GL_LUMINANCE8_ALPHA8_EXT,  GL_UNSIGNED_BYTE,              LoadLA8ToRGBA8                       );
+     InsertLoadFunction(&map, GL_ALPHA32F_EXT,           GL_FLOAT,                      LoadA32FToRGBA32F                    );
+@@ -795,7 +795,7 @@ static D3D11ES3FormatMap BuildD3D11FormatMap()
  
--    DXGI_FORMAT convertedFormat = gl_d3d11::ConvertTextureFormat(internalformat);
-+    DXGI_FORMAT convertedFormat = gl_d3d11::ConvertTextureFormat(internalformat, mRenderer->getFeatureLevel());
-     if (d3d11::IsDepthStencilFormat(convertedFormat))
-     {
-         mTextureFormat = d3d11::GetDepthTextureFormat(convertedFormat);
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp
-index 6f06024..34b8259 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp
-@@ -329,7 +329,7 @@ DXGI_FORMAT ConvertRenderbufferFormat(GLenum format)
-     return DXGI_FORMAT_R8G8B8A8_UNORM;
- }
+     // From GL_EXT_texture_storage
+     //                           | GL internal format     | D3D11 texture format          | D3D11 SRV format                    | D3D11 RTV format              | D3D11 DSV format               |
+-    InsertD3D11FormatInfo(&map, GL_ALPHA8_EXT,             DXGI_FORMAT_A8_UNORM,           DXGI_FORMAT_A8_UNORM,                 DXGI_FORMAT_A8_UNORM,           DXGI_FORMAT_UNKNOWN           );
++    InsertD3D11FormatInfo(&map, GL_ALPHA8_EXT,             DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_UNKNOWN           );
+     InsertD3D11FormatInfo(&map, GL_LUMINANCE8_EXT,         DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_R8G8B8A8_UNORM,           DXGI_FORMAT_R8G8B8A8_UNORM,     DXGI_FORMAT_UNKNOWN           );
+     InsertD3D11FormatInfo(&map, GL_ALPHA32F_EXT,           DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_UNKNOWN           );
+     InsertD3D11FormatInfo(&map, GL_LUMINANCE32F_EXT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT,       DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_UNKNOWN           );
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
+index b1867fb..06a22eb 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
+@@ -283,7 +283,7 @@ static bool GetNPOTTextureSupport(D3D_FEATURE_LEVEL featureLevel)
+         // From http://msdn.microsoft.com/en-us/library/windows/desktop/ff476876.aspx
+       case D3D_FEATURE_LEVEL_9_3:
+       case D3D_FEATURE_LEVEL_9_2:
+-      case D3D_FEATURE_LEVEL_9_1:  return false;
++      case D3D_FEATURE_LEVEL_9_1:  return true; // Provided that mipmaps & wrap modes are not used
  
--DXGI_FORMAT ConvertTextureFormat(GLenum internalformat)
-+DXGI_FORMAT ConvertTextureFormat(GLenum internalformat, D3D_FEATURE_LEVEL featureLevel)
- {
-     switch (internalformat)
-     {
-@@ -342,7 +342,7 @@ DXGI_FORMAT ConvertTextureFormat(GLenum internalformat)
-       case GL_LUMINANCE8_ALPHA8_EXT:
-         return DXGI_FORMAT_R8G8B8A8_UNORM;
-       case GL_ALPHA8_EXT:
--        return DXGI_FORMAT_A8_UNORM;
-+        return featureLevel >= D3D_FEATURE_LEVEL_10_0 ? DXGI_FORMAT_A8_UNORM : DXGI_FORMAT_B8G8R8A8_UNORM;
-       case GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
-       case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
-         return DXGI_FORMAT_BC1_UNORM;
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h
-index 1bc48c1..70ad4fe 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/renderer11_utils.h
-@@ -32,7 +32,7 @@ FLOAT ConvertMinLOD(GLenum minFilter, unsigned int lodOffset);
- FLOAT ConvertMaxLOD(GLenum minFilter, unsigned int lodOffset);
- 
- DXGI_FORMAT ConvertRenderbufferFormat(GLenum format);
--DXGI_FORMAT ConvertTextureFormat(GLenum format);
-+DXGI_FORMAT ConvertTextureFormat(GLenum format, D3D_FEATURE_LEVEL featureLevel);
- }
- 
- namespace d3d11_gl
+       default: UNREACHABLE();      return false;
+     }
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0011-ANGLE-Fix-compilation-error-on-MinGW-caused-by-trace.patch b/src/angle/patches/0011-ANGLE-Fix-compilation-error-on-MinGW-caused-by-trace.patch
deleted file mode 100644
index fdee11d324..0000000000
--- a/src/angle/patches/0011-ANGLE-Fix-compilation-error-on-MinGW-caused-by-trace.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 8ea24fcce69900f42299fd01772714a566f9111e Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Mon, 24 Feb 2014 11:08:23 +0200
-Subject: [PATCH] ANGLE: Fix compilation error on MinGW caused by trace_event.h
-
-The event trace header in ANGLE's third_party directory has an unused
-template which causes a compilation error on MinGW. Disable this part
-of the code.
-
-Change-Id: I167eac56507fafba34e3eb5ce6071d8f136a4e41
----
- src/3rdparty/angle/src/third_party/trace_event/trace_event.h | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h b/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
-index 637cf9a..96ac910 100644
---- a/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
-+++ b/src/3rdparty/angle/src/third_party/trace_event/trace_event.h
-@@ -791,6 +791,7 @@ private:
- // TraceEventSamplingStateScope records the current sampling state
- // and sets a new sampling state. When the scope exists, it restores
- // the sampling state having recorded.
-+#if 0 // This is not used by ANGLE and causes a compilation error on MinGW
- template<size_t BucketNumber>
- class SamplingStateScope {
- public:
-@@ -818,6 +819,7 @@ public:
- private:
-     const char* m_previousState;
- };
-+#endif
- 
- } // namespace TraceEvent
- 
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0012-ANGLE-fix-semantic-index-lookup.patch b/src/angle/patches/0012-ANGLE-fix-semantic-index-lookup.patch
index fe16d1d7b2..35d525fb2d 100644
--- a/src/angle/patches/0012-ANGLE-fix-semantic-index-lookup.patch
+++ b/src/angle/patches/0012-ANGLE-fix-semantic-index-lookup.patch
@@ -1,7 +1,7 @@
-From 15b694fa33cf76f93de62b8106972083f5fb3114 Mon Sep 17 00:00:00 2001
+From 9e167b788cc9de1d963fd3fc2145848a6ccc0fa8 Mon Sep 17 00:00:00 2001
 From: Andrew Knight <andrew.knight@digia.com>
-Date: Fri, 21 Feb 2014 13:34:21 +0200
-Subject: [PATCH] ANGLE: fix semantic index lookup
+Date: Mon, 22 Sep 2014 23:13:16 +0300
+Subject: [PATCH 12/16] ANGLE: fix semantic index lookup
 
 The sorted semantic index table was returning a direct mapping to the
 new indices, instead of the old indices. This caused a mismatch in the
@@ -9,15 +9,15 @@ GL type lookup for the translated attribute.
 
 Change-Id: I75d05ed707f56c45210e3dcbc277f894e3dc5a48
 ---
- src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp                   | 2 +-
- src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp | 4 ++--
+ src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp                    | 2 +-
+ .../angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp       | 4 ++--
  2 files changed, 3 insertions(+), 3 deletions(-)
 
 diff --git a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
-index 41a83b6..13c515a 100644
+index 1085346..3f6d9e0 100644
 --- a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
 +++ b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
-@@ -2643,7 +2643,7 @@ void ProgramBinary::sortAttributesByLayout(rx::TranslatedAttribute attributes[MA
+@@ -2788,7 +2788,7 @@ void ProgramBinary::sortAttributesByLayout(rx::TranslatedAttribute attributes[MA
      for (int i = 0; i < MAX_VERTEX_ATTRIBS; i++)
      {
          int oldIndex = mAttributesByLayout[i];
@@ -26,11 +26,11 @@ index 41a83b6..13c515a 100644
          attributes[i] = oldTranslatedAttributes[oldIndex];
      }
  }
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp
-index 3418e89..4940b8c 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp
-@@ -103,10 +103,10 @@ GLenum InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl::M
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp
+index b006c04..d835e4f 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp
+@@ -112,10 +112,10 @@ gl::Error InputLayoutCache::applyVertexBuffers(TranslatedAttribute attributes[gl
              // Record the type of the associated vertex shader vector in our key
              // This will prevent mismatched vertex shaders from using the same input layout
              GLint attributeSize;
@@ -40,9 +40,9 @@ index 3418e89..4940b8c 100644
              ilKey.elements[ilKey.elementCount].desc.SemanticName = semanticName;
 -            ilKey.elements[ilKey.elementCount].desc.SemanticIndex = sortedSemanticIndices[i];
 +            ilKey.elements[ilKey.elementCount].desc.SemanticIndex = i;
-             ilKey.elements[ilKey.elementCount].desc.Format = attributes[i].attribute->mArrayEnabled ? vertexBuffer->getDXGIFormat(*attributes[i].attribute) : DXGI_FORMAT_R32G32B32A32_FLOAT;
+             ilKey.elements[ilKey.elementCount].desc.Format = vertexFormatInfo.nativeFormat;
              ilKey.elements[ilKey.elementCount].desc.InputSlot = i;
              ilKey.elements[ilKey.elementCount].desc.AlignedByteOffset = 0;
 -- 
-1.8.4.msysgit.0
+1.9.0.msysgit.0
 
diff --git a/src/angle/patches/0013-ANGLE-Add-support-for-querying-platform-device.patch b/src/angle/patches/0013-ANGLE-Add-support-for-querying-platform-device.patch
new file mode 100644
index 0000000000..00e32186f0
--- /dev/null
+++ b/src/angle/patches/0013-ANGLE-Add-support-for-querying-platform-device.patch
@@ -0,0 +1,97 @@
+From 3499339ab768017458d3b5295af3742a0f6015db Mon Sep 17 00:00:00 2001
+From: Andrew Knight <andrew.knight@digia.com>
+Date: Mon, 22 Sep 2014 23:15:26 +0300
+Subject: [PATCH 13/16] ANGLE: Add support for querying platform device
+
+The EGL_EXT_device_base extension allows for querying the platform
+device of the graphics hardware via eglQueryDisplayAttribEXT().
+As that extension is not supported by ANGLE, this patch adds similar
+functionality to the existing eglQuerySurfacePointerANGLE API. When
+EGL_DEVICE_EXT is passed as the queried attribute, the underlying
+D3D/DXGI device pointer is passed back to the caller via the value
+argument.
+
+The D3D device is needed for video support in QtMultimedia as well as
+the IDXGIDevice3::Trim() calls required by the Windows Store.
+
+Change-Id: Ibdf228d81d6604e56db9dd8597d7cd2983ebc428
+---
+ src/3rdparty/angle/src/libEGL/libEGL.cpp | 47 +++++++++++++++++++++++++-------
+ 1 file changed, 37 insertions(+), 10 deletions(-)
+
+diff --git a/src/3rdparty/angle/src/libEGL/libEGL.cpp b/src/3rdparty/angle/src/libEGL/libEGL.cpp
+index 7ea11c5..c2e0fd6 100644
+--- a/src/3rdparty/angle/src/libEGL/libEGL.cpp
++++ b/src/3rdparty/angle/src/libEGL/libEGL.cpp
+@@ -18,6 +18,9 @@
+ #include "libGLESv2/Texture.h"
+ #include "libGLESv2/main.h"
+ #include "libGLESv2/renderer/SwapChain.h"
++#if defined(ANGLE_ENABLE_D3D11)
++#  include "libGLESv2/renderer/d3d/d3d11/Renderer11.h"
++#endif
+ 
+ #include "libEGL/main.h"
+ #include "libEGL/Display.h"
+@@ -484,24 +487,48 @@ EGLBoolean __stdcall eglQuerySurfacePointerANGLE(EGLDisplay dpy, EGLSurface surf
+     egl::Display *display = static_cast<egl::Display*>(dpy);
+     egl::Surface *eglSurface = (egl::Surface*)surface;
+ 
+-    if (!validateSurface(display, eglSurface))
+-    {
+-        return EGL_FALSE;
+-    }
+-
+-    if (surface == EGL_NO_SURFACE)
+-    {
+-        return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
+-    }
+-
+     switch (attribute)
+     {
+       case EGL_D3D_TEXTURE_2D_SHARE_HANDLE_ANGLE:
+         {
++            if (!validateSurface(display, eglSurface))
++            {
++                return EGL_FALSE;
++            }
++
++            if (surface == EGL_NO_SURFACE)
++            {
++                return egl::error(EGL_BAD_SURFACE, EGL_FALSE);
++            }
++
+             rx::SwapChain *swapchain = eglSurface->getSwapChain();
+             *value = (void*) (swapchain ? swapchain->getShareHandle() : NULL);
+         }
+         break;
++#if defined(ANGLE_ENABLE_D3D11)
++      case EGL_DEVICE_EXT:
++        {
++            if (!validateDisplay(display))
++            {
++                return EGL_FALSE;
++            }
++
++            rx::Renderer *renderer = display->getRenderer();
++            if (!renderer)
++            {
++                *value = NULL;
++                break;
++            }
++
++            if (renderer->getMajorShaderModel() < 4)
++            {
++                return egl::error(EGL_BAD_CONTEXT, EGL_FALSE);
++            }
++
++            *value = static_cast<rx::Renderer11*>(renderer)->getDevice();
++        }
++        break;
++#endif
+       default:
+         return egl::error(EGL_BAD_ATTRIBUTE, EGL_FALSE);
+     }
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0013-ANGLE-Allow-for-universal-program-binaries.patch b/src/angle/patches/0013-ANGLE-Allow-for-universal-program-binaries.patch
deleted file mode 100644
index 11c32880df..0000000000
--- a/src/angle/patches/0013-ANGLE-Allow-for-universal-program-binaries.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 5eeb4a06f182b4fc0e3dcb82f47fcf4286890f94 Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Fri, 21 Feb 2014 08:35:01 +0200
-Subject: [PATCH] ANGLE: Allow for universal program binaries
-
-As a safety precaution, ANGLE writes the commit hash, optimization level,
-and adapter ID to its binary format. However, this hurts portability
-between systems by making shader pre-compilation/caching artificially
-system-specific.
-
-The shader compiler doesn't take the target adapter into account, and the
-optimization level information discarded by ANGLE anyway. So, allow ANGLE
-to bypass these checks on systems where precompilation is required (i.e.
-WinRT). The default mechanism still applies unless
-ANGLE_ENABLE_UNIVERSAL_BINARY is passed as a define.
-
-Change-Id: Iec6d833fd7010ed163978557238f00e7ac6ae416
----
- src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
-index 8896665..41a83b6 100644
---- a/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/ProgramBinary.cpp
-@@ -1637,6 +1637,7 @@ bool ProgramBinary::load(InfoLog &infoLog, const void *binary, GLsizei length)
-         return false;
-     }
- 
-+#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-     unsigned char commitString[ANGLE_COMMIT_HASH_SIZE];
-     stream.read(commitString, ANGLE_COMMIT_HASH_SIZE);
-     if (memcmp(commitString, ANGLE_COMMIT_HASH, sizeof(unsigned char) * ANGLE_COMMIT_HASH_SIZE) != 0)
-@@ -1652,6 +1653,7 @@ bool ProgramBinary::load(InfoLog &infoLog, const void *binary, GLsizei length)
-         infoLog.append("Mismatched compilation flags.");
-         return false;
-     }
-+#endif
- 
-     for (int i = 0; i < MAX_VERTEX_ATTRIBS; ++i)
-     {
-@@ -1742,6 +1744,7 @@ bool ProgramBinary::load(InfoLog &infoLog, const void *binary, GLsizei length)
- 
-     const char *ptr = (const char*) binary + stream.offset();
- 
-+#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-     const GUID *binaryIdentifier = (const GUID *) ptr;
-     ptr += sizeof(GUID);
- 
-@@ -1751,6 +1754,7 @@ bool ProgramBinary::load(InfoLog &infoLog, const void *binary, GLsizei length)
-         infoLog.append("Invalid program binary.");
-         return false;
-     }
-+#endif
- 
-     const char *pixelShaderFunction = ptr;
-     ptr += pixelShaderSize;
-@@ -1808,9 +1812,10 @@ bool ProgramBinary::save(void* binary, GLsizei bufSize, GLsizei *length)
-     stream.write(GL_PROGRAM_BINARY_ANGLE);
-     stream.write(ANGLE_MAJOR_VERSION);
-     stream.write(ANGLE_MINOR_VERSION);
-+#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-     stream.write(ANGLE_COMMIT_HASH, ANGLE_COMMIT_HASH_SIZE);
-     stream.write(ANGLE_COMPILE_OPTIMIZATION_LEVEL);
--
-+#endif
-     for (unsigned int i = 0; i < MAX_VERTEX_ATTRIBS; ++i)
-     {
-         stream.write(mLinkedAttribute[i].type);
-@@ -1866,7 +1871,9 @@ bool ProgramBinary::save(void* binary, GLsizei bufSize, GLsizei *length)
-     UINT geometryShaderSize = (mGeometryExecutable != NULL) ? mGeometryExecutable->getLength() : 0;
-     stream.write(geometryShaderSize);
- 
-+#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-     GUID identifier = mRenderer->getAdapterIdentifier();
-+#endif
- 
-     GLsizei streamLength = stream.length();
-     const void *streamData = stream.data();
-@@ -1889,8 +1896,10 @@ bool ProgramBinary::save(void* binary, GLsizei bufSize, GLsizei *length)
-         memcpy(ptr, streamData, streamLength);
-         ptr += streamLength;
- 
-+#if !defined(ANGLE_ENABLE_UNIVERSAL_BINARY)
-         memcpy(ptr, &identifier, sizeof(GUID));
-         ptr += sizeof(GUID);
-+#endif
- 
-         memcpy(ptr, mPixelExecutable->getFunction(), pixelShaderSize);
-         ptr += pixelShaderSize;
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0014-ANGLE-D3D11-Fix-internal-index-buffer-for-level-9-ha.patch b/src/angle/patches/0014-ANGLE-D3D11-Fix-internal-index-buffer-for-level-9-ha.patch
deleted file mode 100644
index 52dfcd6da2..0000000000
--- a/src/angle/patches/0014-ANGLE-D3D11-Fix-internal-index-buffer-for-level-9-ha.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-From d7eb7ea643f00d47447d755b4a2125922d69a3b3 Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Thu, 20 Mar 2014 13:21:29 +0200
-Subject: [PATCH] ANGLE D3D11: Fix internal index buffer for level 9 hardware
-
-Some level 9 hardware does not support 32-bit indices, and in most
-places this is already checked. It would appear that most phone
-hardware actually does support 32-bit indices, and so this bug wasn't
-caught until testing on the Surface RT. This is not surprising, as some
-level 9 resources are only a minimum for the hardware spec, not the
-true limit of the device/driver.
-
-This patch provides the general fix to use 16-bit indices on such
-hardware, but a whitelist of known good GPUs should be added to enable
-32-bit indices where available.
-
-Change-Id: I282ede5dd4a323037ade6c44b7cfac2c6445b491
----
- .../src/libGLESv2/renderer/d3d11/Renderer11.cpp    | 169 ++++++++++++---------
- 1 file changed, 94 insertions(+), 75 deletions(-)
-
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-index 31d976d..2de477b 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-@@ -1137,6 +1137,84 @@ void Renderer11::drawElements(GLenum mode, GLsizei count, GLenum type, const GLv
-     }
- }
- 
-+template<typename T>
-+static void fillLineLoopIndices(GLenum type, GLsizei count, const GLvoid *indices, T *data)
-+{
-+    switch (type)
-+    {
-+      case GL_NONE:   // Non-indexed draw
-+        for (int i = 0; i < count; i++)
-+        {
-+            data[i] = i;
-+        }
-+        data[count] = 0;
-+        break;
-+      case GL_UNSIGNED_BYTE:
-+        for (int i = 0; i < count; i++)
-+        {
-+            data[i] = static_cast<const GLubyte*>(indices)[i];
-+        }
-+        data[count] = static_cast<const GLubyte*>(indices)[0];
-+        break;
-+      case GL_UNSIGNED_SHORT:
-+        for (int i = 0; i < count; i++)
-+        {
-+            data[i] = static_cast<const GLushort*>(indices)[i];
-+        }
-+        data[count] = static_cast<const GLushort*>(indices)[0];
-+        break;
-+      case GL_UNSIGNED_INT:
-+        for (int i = 0; i < count; i++)
-+        {
-+            data[i] = static_cast<const GLuint*>(indices)[i];
-+        }
-+        data[count] = static_cast<const GLuint*>(indices)[0];
-+        break;
-+      default: UNREACHABLE();
-+    }
-+}
-+
-+template<typename T>
-+static void fillTriangleFanIndices(GLenum type, unsigned int numTris, const GLvoid *indices, T *data)
-+{
-+    switch (type)
-+    {
-+      case GL_NONE:   // Non-indexed draw
-+        for (unsigned int i = 0; i < numTris; i++)
-+        {
-+            data[i*3 + 0] = 0;
-+            data[i*3 + 1] = i + 1;
-+            data[i*3 + 2] = i + 2;
-+        }
-+        break;
-+      case GL_UNSIGNED_BYTE:
-+        for (unsigned int i = 0; i < numTris; i++)
-+        {
-+            data[i*3 + 0] = static_cast<const GLubyte*>(indices)[0];
-+            data[i*3 + 1] = static_cast<const GLubyte*>(indices)[i + 1];
-+            data[i*3 + 2] = static_cast<const GLubyte*>(indices)[i + 2];
-+        }
-+        break;
-+      case GL_UNSIGNED_SHORT:
-+        for (unsigned int i = 0; i < numTris; i++)
-+        {
-+            data[i*3 + 0] = static_cast<const GLushort*>(indices)[0];
-+            data[i*3 + 1] = static_cast<const GLushort*>(indices)[i + 1];
-+            data[i*3 + 2] = static_cast<const GLushort*>(indices)[i + 2];
-+        }
-+        break;
-+      case GL_UNSIGNED_INT:
-+        for (unsigned int i = 0; i < numTris; i++)
-+        {
-+            data[i*3 + 0] = static_cast<const GLuint*>(indices)[0];
-+            data[i*3 + 1] = static_cast<const GLuint*>(indices)[i + 1];
-+            data[i*3 + 2] = static_cast<const GLuint*>(indices)[i + 2];
-+        }
-+        break;
-+      default: UNREACHABLE();
-+    }
-+}
-+
- void Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices, int minIndex, gl::Buffer *elementArrayBuffer)
- {
-     // Get the raw indices for an indexed draw
-@@ -1148,10 +1226,12 @@ void Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
-         indices = static_cast<const GLubyte*>(storage->getData()) + offset;
-     }
- 
-+    const int indexType = get32BitIndexSupport() ? GL_UNSIGNED_INT : GL_UNSIGNED_SHORT;
-+
-     if (!mLineLoopIB)
-     {
-         mLineLoopIB = new StreamingIndexBufferInterface(this);
--        if (!mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT))
-+        if (!mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType))
-         {
-             delete mLineLoopIB;
-             mLineLoopIB = NULL;
-@@ -1171,7 +1251,7 @@ void Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
-     }
- 
-     const unsigned int spaceNeeded = (static_cast<unsigned int>(count) + 1) * sizeof(unsigned int);
--    if (!mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT))
-+    if (!mLineLoopIB->reserveBufferSpace(spaceNeeded, indexType))
-     {
-         ERR("Could not reserve enough space in looping index buffer for GL_LINE_LOOP.");
-         return gl::error(GL_OUT_OF_MEMORY);
-@@ -1185,42 +1265,12 @@ void Renderer11::drawLineLoop(GLsizei count, GLenum type, const GLvoid *indices,
-         return gl::error(GL_OUT_OF_MEMORY);
-     }
- 
--    unsigned int *data = reinterpret_cast<unsigned int*>(mappedMemory);
-+    if (indexType == GL_UNSIGNED_SHORT)
-+        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned short*>(mappedMemory));
-+    else
-+        fillLineLoopIndices(type, count, indices, reinterpret_cast<unsigned int*>(mappedMemory));
-     unsigned int indexBufferOffset = offset;
- 
--    switch (type)
--    {
--      case GL_NONE:   // Non-indexed draw
--        for (int i = 0; i < count; i++)
--        {
--            data[i] = i;
--        }
--        data[count] = 0;
--        break;
--      case GL_UNSIGNED_BYTE:
--        for (int i = 0; i < count; i++)
--        {
--            data[i] = static_cast<const GLubyte*>(indices)[i];
--        }
--        data[count] = static_cast<const GLubyte*>(indices)[0];
--        break;
--      case GL_UNSIGNED_SHORT:
--        for (int i = 0; i < count; i++)
--        {
--            data[i] = static_cast<const GLushort*>(indices)[i];
--        }
--        data[count] = static_cast<const GLushort*>(indices)[0];
--        break;
--      case GL_UNSIGNED_INT:
--        for (int i = 0; i < count; i++)
--        {
--            data[i] = static_cast<const GLuint*>(indices)[i];
--        }
--        data[count] = static_cast<const GLuint*>(indices)[0];
--        break;
--      default: UNREACHABLE();
--    }
--
-     if (!mLineLoopIB->unmapBuffer())
-     {
-         ERR("Could not unmap index buffer for GL_LINE_LOOP.");
-@@ -1251,10 +1301,12 @@ void Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indic
-         indices = static_cast<const GLubyte*>(storage->getData()) + offset;
-     }
- 
-+    const int indexType = get32BitIndexSupport() ? GL_UNSIGNED_INT : GL_UNSIGNED_SHORT;
-+
-     if (!mTriangleFanIB)
-     {
-         mTriangleFanIB = new StreamingIndexBufferInterface(this);
--        if (!mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT))
-+        if (!mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, indexType))
-         {
-             delete mTriangleFanIB;
-             mTriangleFanIB = NULL;
-@@ -1276,7 +1328,7 @@ void Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indic
-     }
- 
-     const unsigned int spaceNeeded = (numTris * 3) * sizeof(unsigned int);
--    if (!mTriangleFanIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT))
-+    if (!mTriangleFanIB->reserveBufferSpace(spaceNeeded, indexType))
-     {
-         ERR("Could not reserve enough space in scratch index buffer for GL_TRIANGLE_FAN.");
-         return gl::error(GL_OUT_OF_MEMORY);
-@@ -1290,45 +1342,12 @@ void Renderer11::drawTriangleFan(GLsizei count, GLenum type, const GLvoid *indic
-         return gl::error(GL_OUT_OF_MEMORY);
-     }
- 
--    unsigned int *data = reinterpret_cast<unsigned int*>(mappedMemory);
-+    if (indexType == GL_UNSIGNED_SHORT)
-+        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned short*>(mappedMemory));
-+    else
-+        fillTriangleFanIndices(type, numTris, indices, reinterpret_cast<unsigned int*>(mappedMemory));
-     unsigned int indexBufferOffset = offset;
- 
--    switch (type)
--    {
--      case GL_NONE:   // Non-indexed draw
--        for (unsigned int i = 0; i < numTris; i++)
--        {
--            data[i*3 + 0] = 0;
--            data[i*3 + 1] = i + 1;
--            data[i*3 + 2] = i + 2;
--        }
--        break;
--      case GL_UNSIGNED_BYTE:
--        for (unsigned int i = 0; i < numTris; i++)
--        {
--            data[i*3 + 0] = static_cast<const GLubyte*>(indices)[0];
--            data[i*3 + 1] = static_cast<const GLubyte*>(indices)[i + 1];
--            data[i*3 + 2] = static_cast<const GLubyte*>(indices)[i + 2];
--        }
--        break;
--      case GL_UNSIGNED_SHORT:
--        for (unsigned int i = 0; i < numTris; i++)
--        {
--            data[i*3 + 0] = static_cast<const GLushort*>(indices)[0];
--            data[i*3 + 1] = static_cast<const GLushort*>(indices)[i + 1];
--            data[i*3 + 2] = static_cast<const GLushort*>(indices)[i + 2];
--        }
--        break;
--      case GL_UNSIGNED_INT:
--        for (unsigned int i = 0; i < numTris; i++)
--        {
--            data[i*3 + 0] = static_cast<const GLuint*>(indices)[0];
--            data[i*3 + 1] = static_cast<const GLuint*>(indices)[i + 1];
--            data[i*3 + 2] = static_cast<const GLuint*>(indices)[i + 2];
--        }
--        break;
--      default: UNREACHABLE();
--    }
- 
-     if (!mTriangleFanIB->unmapBuffer())
-     {
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0014-Let-ANGLE-use-multithreaded-devices-if-necessary.patch b/src/angle/patches/0014-Let-ANGLE-use-multithreaded-devices-if-necessary.patch
new file mode 100644
index 0000000000..b884f7b549
--- /dev/null
+++ b/src/angle/patches/0014-Let-ANGLE-use-multithreaded-devices-if-necessary.patch
@@ -0,0 +1,72 @@
+From a3046fef7f754f06937161e779ce0a651e77317b Mon Sep 17 00:00:00 2001
+From: Michael Bruning <michael.bruning@digia.com>
+Date: Mon, 22 Sep 2014 23:23:40 +0300
+Subject: [PATCH 14/16] Let ANGLE use multithreaded devices if necessary.
+
+This is needed to prevent lock-ups in application that use ANGLE from
+multiple threads, as e.g. QtWebEngine based applications do.
+
+The environment variable QT_D3DCREATE_MULTITHREADED is used to
+communicate this from the QtWebEngine module.
+
+Change-Id: Ibd5a5c75eb68af567d420d9a35efb3490c93b27c
+---
+ src/3rdparty/angle/src/common/platform.h                    |  1 +
+ .../angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp   | 13 +++++++++++++
+ .../angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp     |  4 ++++
+ 3 files changed, 18 insertions(+)
+
+diff --git a/src/3rdparty/angle/src/common/platform.h b/src/3rdparty/angle/src/common/platform.h
+index 387ba41..7d0d957 100644
+--- a/src/3rdparty/angle/src/common/platform.h
++++ b/src/3rdparty/angle/src/common/platform.h
+@@ -57,6 +57,7 @@
+ 
+ #   if defined(ANGLE_ENABLE_D3D11)
+ #       include <d3d10_1.h>
++#       include <d3d10.h>
+ #       include <d3d11.h>
+ #       include <dxgi.h>
+ #       include <dxgi1_2.h>
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+index b4b26a8..bd07ee1 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+@@ -301,6 +301,19 @@ EGLint Renderer11::initialize()
+     }
+ #endif
+ 
++#if !defined(ANGLE_PLATFORM_WINRT)
++    static wchar_t *qt_d3dcreate_multihreaded_var = _wgetenv(L"QT_D3DCREATE_MULTITHREADED");
++    if (qt_d3dcreate_multihreaded_var && wcsstr(qt_d3dcreate_multihreaded_var, L"1"))
++    {
++        ID3D10Multithread *multithread;
++        result = mDevice->QueryInterface(IID_PPV_ARGS(&multithread));
++        ASSERT(SUCCEEDED(result));
++        result = multithread->SetMultithreadProtected(true);
++        ASSERT(SUCCEEDED(result));
++        multithread->Release();
++    }
++#endif
++
+     initializeDevice();
+ 
+     return EGL_SUCCESS;
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
+index e8564bd..1d52705 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
+@@ -304,6 +304,10 @@ EGLint Renderer9::initialize()
+     D3DPRESENT_PARAMETERS presentParameters = getDefaultPresentParameters();
+     DWORD behaviorFlags = D3DCREATE_FPU_PRESERVE | D3DCREATE_NOWINDOWCHANGES;
+ 
++    static wchar_t *qt_d3dcreate_multihreaded_var = _wgetenv(L"QT_D3DCREATE_MULTITHREADED");
++    if (qt_d3dcreate_multihreaded_var && wcsstr(qt_d3dcreate_multihreaded_var, L"1"))
++        behaviorFlags |= D3DCREATE_MULTITHREADED;
++
+     {
+         result = mD3d9->CreateDevice(mAdapter, mDeviceType, mDeviceWindow, behaviorFlags | D3DCREATE_HARDWARE_VERTEXPROCESSING | D3DCREATE_PUREDEVICE, &presentParameters, &mDevice);
+     }
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0015-ANGLE-Don-t-export-DLLMain-functions-for-static-buil.patch b/src/angle/patches/0015-ANGLE-Don-t-export-DLLMain-functions-for-static-buil.patch
deleted file mode 100644
index 0341da289a..0000000000
--- a/src/angle/patches/0015-ANGLE-Don-t-export-DLLMain-functions-for-static-buil.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 6545677945d24854007d39fed86d4e44900b5c1a Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Thu, 27 Mar 2014 15:36:52 +0200
-Subject: [PATCH] ANGLE: Don't export DLLMain functions for static builds
-
-These ifdef guards were originally a part of
-"0004-Make-it-possible-to-link-ANGLE-statically-for-single.patch",
-but were lost during the last ANGLE upgrade.
-
-Task-number: QTBUG-37842
-Change-Id: I4340c1641675dd310c14454a851eb4bc0ae2ec0d
----
- src/3rdparty/angle/src/libEGL/main.cpp    | 4 ++++
- src/3rdparty/angle/src/libGLESv2/main.cpp | 4 ++++
- 2 files changed, 8 insertions(+)
-
-diff --git a/src/3rdparty/angle/src/libEGL/main.cpp b/src/3rdparty/angle/src/libEGL/main.cpp
-index e972691..4cdf5f0 100644
---- a/src/3rdparty/angle/src/libEGL/main.cpp
-+++ b/src/3rdparty/angle/src/libEGL/main.cpp
-@@ -69,6 +69,8 @@ void DeallocateCurrent()
- 
- }
- 
-+#ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-+
- extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved)
- {
-     switch (reason)
-@@ -124,6 +126,8 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
-     return TRUE;
- }
- 
-+#endif // !QT_OPENGL_ES_2_ANGLE_STATIC
-+
- namespace egl
- {
- 
-diff --git a/src/3rdparty/angle/src/libGLESv2/main.cpp b/src/3rdparty/angle/src/libGLESv2/main.cpp
-index 95f4b8d..e527994 100644
---- a/src/3rdparty/angle/src/libGLESv2/main.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/main.cpp
-@@ -66,6 +66,8 @@ void DeallocateCurrent()
- 
- }
- 
-+#ifndef QT_OPENGL_ES_2_ANGLE_STATIC
-+
- extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved)
- {
-     switch (reason)
-@@ -107,6 +109,8 @@ extern "C" BOOL WINAPI DllMain(HINSTANCE instance, DWORD reason, LPVOID reserved
-     return TRUE;
- }
- 
-+#endif // !QT_OPENGL_ES_2_ANGLE_STATIC
-+
- namespace gl
- {
- 
--- 
-1.8.4.msysgit.0
-
diff --git a/src/angle/patches/0015-ANGLE-Fix-angle-d3d11-on-MSVC2010.patch b/src/angle/patches/0015-ANGLE-Fix-angle-d3d11-on-MSVC2010.patch
new file mode 100644
index 0000000000..7d914766a0
--- /dev/null
+++ b/src/angle/patches/0015-ANGLE-Fix-angle-d3d11-on-MSVC2010.patch
@@ -0,0 +1,375 @@
+From 373b3f67352e9a6f599c6a9dd9aee3b4836e0a3f Mon Sep 17 00:00:00 2001
+From: Andrew Knight <andrew.knight@digia.com>
+Date: Mon, 22 Sep 2014 23:41:48 +0300
+Subject: [PATCH 15/16] ANGLE: Fix -angle-d3d11 on MSVC2010
+
+Allow the D3D11 renderer to build with the June 2010 DirectX SDK.
+
+Change-Id: I2343acedab16845d6a0d4a53cf3145f583efc4a7
+---
+ src/3rdparty/angle/src/common/platform.h           |  6 ++
+ .../renderer/d3d/d3d11/renderer11_utils.cpp        | 89 ++++++++++++++++++++++
+ 2 files changed, 95 insertions(+)
+
+diff --git a/src/3rdparty/angle/src/common/platform.h b/src/3rdparty/angle/src/common/platform.h
+index 7d0d957..3c619f3 100644
+--- a/src/3rdparty/angle/src/common/platform.h
++++ b/src/3rdparty/angle/src/common/platform.h
+@@ -52,7 +52,9 @@
+ 
+ #   if defined(ANGLE_ENABLE_D3D9) || defined(ANGLE_ENABLE_PERF)
+ #       include <d3d9.h>
++#      if !defined(COMPILER_IMPLEMENTATION)
+ #       include <d3dcompiler.h>
++#      endif
+ #   endif
+ 
+ #   if defined(ANGLE_ENABLE_D3D11)
+@@ -60,8 +62,12 @@
+ #       include <d3d10.h>
+ #       include <d3d11.h>
+ #       include <dxgi.h>
++#      if _MSC_VER >= 1700
+ #       include <dxgi1_2.h>
++#      endif
++#      if !defined(COMPILER_IMPLEMENTATION)
+ #       include <d3dcompiler.h>
++#      endif
+ #   endif
+ 
+ #   undef near
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
+index 06a22eb..345fd24 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
+@@ -17,6 +17,37 @@
+ 
+ #include <algorithm>
+ 
++#ifndef D3D_FL9_1_DEFAULT_MAX_ANISOTROPY
++#  define D3D_FL9_1_DEFAULT_MAX_ANISOTROPY 2
++#endif
++#ifndef D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT
++#  define D3D_FL9_1_SIMULTANEOUS_RENDER_TARGET_COUNT 1
++#endif
++#ifndef D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT
++#  define D3D_FL9_3_SIMULTANEOUS_RENDER_TARGET_COUNT 4
++#endif
++#ifndef D3D_FL9_1_IA_PRIMITIVE_MAX_COUNT
++#  define D3D_FL9_1_IA_PRIMITIVE_MAX_COUNT 65535
++#endif
++#ifndef D3D_FL9_2_IA_PRIMITIVE_MAX_COUNT
++#  define D3D_FL9_2_IA_PRIMITIVE_MAX_COUNT 1048575
++#endif
++#ifndef D3D_FL9_1_REQ_TEXTURECUBE_DIMENSION
++#  define D3D_FL9_1_REQ_TEXTURECUBE_DIMENSION 512
++#endif
++#ifndef D3D_FL9_3_REQ_TEXTURECUBE_DIMENSION
++#  define D3D_FL9_3_REQ_TEXTURECUBE_DIMENSION 4096
++#endif
++#ifndef D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION
++#  define D3D_FL9_1_REQ_TEXTURE2D_U_OR_V_DIMENSION 2048
++#endif
++#ifndef D3D_FL9_1_REQ_TEXTURE3D_U_V_OR_W_DIMENSION
++#  define D3D_FL9_1_REQ_TEXTURE3D_U_V_OR_W_DIMENSION 256
++#endif
++#ifndef D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION
++#  define D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION 4096
++#endif
++
+ namespace rx
+ {
+ 
+@@ -275,7 +306,9 @@ static bool GetNPOTTextureSupport(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0: return true;
+@@ -293,7 +326,9 @@ static float GetMaximumAnisotropy(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_MAX_MAXANISOTROPY;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -313,7 +348,9 @@ static bool GetOcclusionQuerySupport(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0: return true;
+@@ -333,7 +370,9 @@ static bool GetEventQuerySupport(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0:
+@@ -351,7 +390,9 @@ static bool GetInstancingSupport(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0:
+@@ -374,7 +415,9 @@ static bool GetDerivativeInstructionSupport(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0:
+@@ -392,7 +435,9 @@ static size_t GetMaximumSimultaneousRenderTargets(D3D_FEATURE_LEVEL featureLevel
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_SIMULTANEOUS_RENDER_TARGET_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -410,7 +455,9 @@ static size_t GetMaximum2DTextureSize(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_U_OR_V_DIMENSION;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -428,7 +475,9 @@ static size_t GetMaximumCubeMapTextureSize(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURECUBE_DIMENSION;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -446,7 +495,9 @@ static size_t GetMaximum2DTextureArraySize(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -464,7 +515,9 @@ static size_t GetMaximum3DTextureSize(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_TEXTURE3D_U_V_OR_W_DIMENSION;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -482,7 +535,9 @@ static size_t GetMaximumViewportSize(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_VIEWPORT_BOUNDS_MAX;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -506,7 +561,9 @@ static size_t GetMaximumDrawIndexedIndexCount(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0: return std::numeric_limits<GLint>::max();
+@@ -528,7 +585,9 @@ static size_t GetMaximumDrawVertexCount(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0: return std::numeric_limits<GLint>::max();
+@@ -545,7 +604,9 @@ static size_t GetMaximumVertexInputSlots(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_STANDARD_VERTEX_ELEMENT_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1: return D3D10_1_STANDARD_VERTEX_ELEMENT_COUNT;
+@@ -565,7 +626,9 @@ static size_t GetMaximumVertexUniformVectors(D3D_FEATURE_LEVEL featureLevel)
+     // TODO(geofflang): Remove hard-coded limit once the gl-uniform-arrays test can pass
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return 1024; // D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -590,7 +653,9 @@ static size_t GetMaximumVertexUniformBlocks(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT - GetReservedVertexUniformBuffers();
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -617,7 +682,9 @@ static size_t GetMaximumVertexOutputVectors(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_VS_OUTPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+ 
+       case D3D_FEATURE_LEVEL_10_1: return D3D10_1_VS_OUTPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+@@ -636,7 +703,9 @@ static size_t GetMaximumVertexTextureUnits(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -658,7 +727,9 @@ static size_t GetMaximumPixelUniformVectors(D3D_FEATURE_LEVEL featureLevel)
+     // TODO(geofflang): Remove hard-coded limit once the gl-uniform-arrays test can pass
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return 1024; // D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -683,7 +754,9 @@ static size_t GetMaximumPixelUniformBlocks(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT - GetReservedPixelUniformBuffers();
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -702,7 +775,9 @@ static size_t GetMaximumPixelInputVectors(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_PS_INPUT_REGISTER_COUNT - GetReservedVertexOutputVectors();
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -721,7 +796,9 @@ static size_t GetMaximumPixelTextureUnits(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -740,7 +817,9 @@ static int GetMinimumTexelOffset(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -759,7 +838,9 @@ static int GetMaximumTexelOffset(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE;
+       case D3D_FEATURE_LEVEL_10_1:
+       case D3D_FEATURE_LEVEL_10_0: return D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE;
+@@ -782,7 +863,9 @@ static size_t GetMaximumConstantBufferSize(D3D_FEATURE_LEVEL featureLevel)
+ 
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT * bytesPerComponent;
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -801,7 +884,9 @@ static size_t GetMaximumStreamOutputBuffers(D3D_FEATURE_LEVEL featureLevel)
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return D3D11_SO_BUFFER_SLOT_COUNT;
+ 
+       case D3D_FEATURE_LEVEL_10_1: return D3D10_1_SO_BUFFER_SLOT_COUNT;
+@@ -819,7 +904,9 @@ static size_t GetMaximumStreamOutputInterleavedComponenets(D3D_FEATURE_LEVEL fea
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0:
+ 
+       case D3D_FEATURE_LEVEL_10_1:
+@@ -837,7 +924,9 @@ static size_t GetMaximumStreamOutputSeparateCompeonents(D3D_FEATURE_LEVEL featur
+ {
+     switch (featureLevel)
+     {
++#if _MSC_VER >= 1700
+       case D3D_FEATURE_LEVEL_11_1:
++#endif
+       case D3D_FEATURE_LEVEL_11_0: return GetMaximumStreamOutputInterleavedComponenets(featureLevel) /
+                                           GetMaximumStreamOutputBuffers(featureLevel);
+ 
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0016-ANGLE-Fix-compilation-with-MinGW-D3D11.patch b/src/angle/patches/0016-ANGLE-Fix-compilation-with-MinGW-D3D11.patch
new file mode 100644
index 0000000000..2ea528018d
--- /dev/null
+++ b/src/angle/patches/0016-ANGLE-Fix-compilation-with-MinGW-D3D11.patch
@@ -0,0 +1,269 @@
+From 75c39e9020f062d155097f6b49aebbc12970b1e8 Mon Sep 17 00:00:00 2001
+From: Andrew Knight <andrew.knight@digia.com>
+Date: Tue, 23 Sep 2014 23:39:14 +0300
+Subject: [PATCH 16/16] ANGLE: Fix compilation with MinGW + D3D11
+
+Provide workarounds for things GCC doesn't like, and define a number
+of macros not found in the MinGW headers.
+
+Change-Id: I254c208209c0071fae5efb6727f2b3cfd5542da6
+---
+ src/3rdparty/angle/src/common/platform.h           | 11 +++++
+ src/3rdparty/angle/src/libEGL/Display.cpp          |  1 +
+ src/3rdparty/angle/src/libGLESv2/Context.cpp       |  5 +-
+ src/3rdparty/angle/src/libGLESv2/angletypes.h      |  1 +
+ .../angle/src/libGLESv2/renderer/copyimage.inl     |  2 +-
+ .../src/libGLESv2/renderer/d3d/TextureD3D.cpp      |  4 +-
+ .../libGLESv2/renderer/d3d/d3d11/Renderer11.cpp    |  2 +-
+ .../libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp   |  2 +-
+ .../renderer/d3d/d3d11/renderer11_utils.cpp        | 53 +++++++++++++++++++++-
+ .../src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp  |  4 +-
+ src/3rdparty/angle/src/libGLESv2/validationES.cpp  |  2 +-
+ 11 files changed, 76 insertions(+), 11 deletions(-)
+
+diff --git a/src/3rdparty/angle/src/common/platform.h b/src/3rdparty/angle/src/common/platform.h
+index 3c619f3..b53394f 100644
+--- a/src/3rdparty/angle/src/common/platform.h
++++ b/src/3rdparty/angle/src/common/platform.h
+@@ -68,6 +68,17 @@
+ #      if !defined(COMPILER_IMPLEMENTATION)
+ #       include <d3dcompiler.h>
+ #      endif
++#      if defined(__MINGW32__)
++typedef enum D3D11_MAP_FLAG
++{
++    D3D11_MAP_FLAG_DO_NOT_WAIT = 0x100000L
++} D3D11_MAP_FLAG;
++typedef struct D3D11_QUERY_DATA_SO_STATISTICS
++{
++    UINT64 NumPrimitivesWritten;
++    UINT64 PrimitivesStorageNeeded;
++} D3D11_QUERY_DATA_SO_STATISTICS;
++#      endif
+ #   endif
+ 
+ #   undef near
+diff --git a/src/3rdparty/angle/src/libEGL/Display.cpp b/src/3rdparty/angle/src/libEGL/Display.cpp
+index ba09631..5a50e4b 100644
+--- a/src/3rdparty/angle/src/libEGL/Display.cpp
++++ b/src/3rdparty/angle/src/libEGL/Display.cpp
+@@ -14,6 +14,7 @@
+ #include <map>
+ #include <vector>
+ #include <sstream>
++#include <iterator>
+ 
+ #include "common/debug.h"
+ #include "common/mathutil.h"
+diff --git a/src/3rdparty/angle/src/libGLESv2/Context.cpp b/src/3rdparty/angle/src/libGLESv2/Context.cpp
+index 04c7616..5342de1 100644
+--- a/src/3rdparty/angle/src/libGLESv2/Context.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/Context.cpp
+@@ -33,6 +33,7 @@
+ #include "libEGL/Surface.h"
+ 
+ #include <sstream>
++#include <iterator>
+ 
+ namespace gl
+ {
+@@ -354,7 +355,7 @@ void Context::deleteFenceSync(GLsync fenceSync)
+     // wait commands finish. However, since the name becomes invalid, we cannot query the fence,
+     // and since our API is currently designed for being called from a single thread, we can delete
+     // the fence immediately.
+-    mResourceManager->deleteFenceSync(reinterpret_cast<GLuint>(fenceSync));
++    mResourceManager->deleteFenceSync(uintptr_t(fenceSync));
+ }
+ 
+ void Context::deleteVertexArray(GLuint vertexArray)
+@@ -460,7 +461,7 @@ Renderbuffer *Context::getRenderbuffer(GLuint handle)
+ 
+ FenceSync *Context::getFenceSync(GLsync handle) const
+ {
+-    return mResourceManager->getFenceSync(reinterpret_cast<GLuint>(handle));
++    return mResourceManager->getFenceSync(uintptr_t(handle));
+ }
+ 
+ VertexArray *Context::getVertexArray(GLuint handle) const
+diff --git a/src/3rdparty/angle/src/libGLESv2/angletypes.h b/src/3rdparty/angle/src/libGLESv2/angletypes.h
+index 922053e..642a6ec 100644
+--- a/src/3rdparty/angle/src/libGLESv2/angletypes.h
++++ b/src/3rdparty/angle/src/libGLESv2/angletypes.h
+@@ -11,6 +11,7 @@
+ 
+ #include "libGLESv2/constants.h"
+ #include "common/RefCountObject.h"
++#include <float.h>
+ 
+ namespace gl
+ {
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl
+index ea6970c..0498cf7 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/copyimage.inl
+@@ -24,7 +24,7 @@ inline void WriteColor(const uint8_t *source, uint8_t *dest)
+ template <typename sourceType, typename destType, typename colorDataType>
+ inline void CopyPixel(const uint8_t *source, uint8_t *dest)
+ {
+-    colorType temp;
++    colorDataType temp;
+     ReadColor<sourceType, colorDataType>(source, &temp);
+     WriteColor<destType, colorDataType>(&temp, dest);
+ }
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp
+index 2650913..96c8497 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/TextureD3D.cpp
+@@ -129,7 +129,7 @@ bool TextureD3D::subImage(GLint xoffset, GLint yoffset, GLint zoffset, GLsizei w
+     if (unpack.pixelBuffer.id() != 0)
+     {
+         gl::Buffer *pixelBuffer = unpack.pixelBuffer.get();
+-        unsigned int offset = reinterpret_cast<unsigned int>(pixels);
++        ptrdiff_t offset = reinterpret_cast<ptrdiff_t>(pixels);
+         // TODO: setImage/subImage is the only place outside of renderer that asks for a buffers raw data.
+         // This functionality should be moved into renderer and the getData method of BufferImpl removed.
+         const void *bufferData = pixelBuffer->getImplementation()->getData();
+@@ -186,7 +186,7 @@ bool TextureD3D::fastUnpackPixels(const gl::PixelUnpackState &unpack, const void
+     // to create a render target.
+     ASSERT(mRenderer->supportsFastCopyBufferToTexture(sizedInternalFormat));
+ 
+-    unsigned int offset = reinterpret_cast<unsigned int>(pixels);
++    ptrdiff_t offset = reinterpret_cast<ptrdiff_t>(pixels);
+ 
+     return mRenderer->fastCopyBufferToTexture(unpack, offset, destRenderTarget, sizedInternalFormat, type, destArea);
+ }
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+index bd07ee1..b29b2ef 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp
+@@ -281,7 +281,7 @@ EGLint Renderer11::initialize()
+     }
+ 
+     // Disable some spurious D3D11 debug warnings to prevent them from flooding the output log
+-#if defined(ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS) && defined(_DEBUG)
++#if !defined(__MINGW32__) && defined(ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS) && defined(_DEBUG)
+     ID3D11InfoQueue *infoQueue;
+     result = mDevice->QueryInterface(__uuidof(ID3D11InfoQueue),  (void **)&infoQueue);
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
+index 787c511..4b29be0 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp
+@@ -537,7 +537,7 @@ void SwapChain11::initPassThroughResources()
+     samplerDesc.BorderColor[2] = 0.0f;
+     samplerDesc.BorderColor[3] = 0.0f;
+     samplerDesc.MinLOD = 0;
+-    samplerDesc.MaxLOD = D3D11_FLOAT32_MAX;
++    samplerDesc.MaxLOD = FLT_MAX;
+ 
+     result = device->CreateSamplerState(&samplerDesc, &mPassThroughSampler);
+     ASSERT(SUCCEEDED(result));
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
+index 345fd24..2af97e7 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp
+@@ -47,6 +47,57 @@
+ #ifndef D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION
+ #  define D3D_FL9_3_REQ_TEXTURE2D_U_OR_V_DIMENSION 4096
+ #endif
++#ifndef D3D11_REQ_TEXTURECUBE_DIMENSION
++#  define D3D11_REQ_TEXTURECUBE_DIMENSION 16384
++#endif
++#ifndef D3D11_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION
++#  define D3D11_REQ_TEXTURE2D_ARRAY_AXIS_DIMENSION 2048
++#endif
++#ifndef D3D11_REQ_TEXTURE3D_U_V_OR_W_DIMENSION
++#  define D3D11_REQ_TEXTURE3D_U_V_OR_W_DIMENSION 2048
++#endif
++#ifndef D3D11_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP
++#  define D3D11_REQ_DRAWINDEXED_INDEX_COUNT_2_TO_EXP 32
++#endif
++#ifndef D3D11_REQ_DRAW_VERTEX_COUNT_2_TO_EXP
++#  define D3D11_REQ_DRAW_VERTEX_COUNT_2_TO_EXP 32
++#endif
++#ifndef D3D10_1_STANDARD_VERTEX_ELEMENT_COUNT
++#  define D3D10_1_STANDARD_VERTEX_ELEMENT_COUNT 32
++#endif
++#ifndef D3D11_STANDARD_VERTEX_ELEMENT_COUNT
++#  define D3D11_STANDARD_VERTEX_ELEMENT_COUNT 32
++#endif
++#ifndef D3D10_1_SO_BUFFER_SLOT_COUNT
++#  define D3D10_1_SO_BUFFER_SLOT_COUNT 4
++#endif
++#ifndef D3D11_SO_BUFFER_SLOT_COUNT
++#  define D3D11_SO_BUFFER_SLOT_COUNT 4
++#endif
++#ifndef D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT
++#  define D3D11_COMMONSHADER_CONSTANT_BUFFER_API_SLOT_COUNT 14
++#endif
++#ifndef D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT
++#  define D3D11_COMMONSHADER_SAMPLER_SLOT_COUNT 16
++#endif
++#ifndef D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE
++#  define D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_NEGATIVE -8
++#endif
++#ifndef D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE
++#  define D3D11_COMMONSHADER_TEXEL_OFFSET_MAX_POSITIVE 7
++#endif
++#ifndef D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT
++#  define D3D11_REQ_CONSTANT_BUFFER_ELEMENT_COUNT 4096
++#endif
++#ifndef D3D11_PS_INPUT_REGISTER_COUNT
++#  define D3D11_PS_INPUT_REGISTER_COUNT 32
++#endif
++#ifndef D3D10_1_VS_OUTPUT_REGISTER_COUNT
++#  define D3D10_1_VS_OUTPUT_REGISTER_COUNT 32
++#endif
++#ifndef D3D11_VS_OUTPUT_REGISTER_COUNT
++#  define D3D11_VS_OUTPUT_REGISTER_COUNT 32
++#endif
+ 
+ namespace rx
+ {
+@@ -1147,7 +1198,7 @@ void SetPositionLayerTexCoord3DVertex(PositionLayerTexCoord3DVertex* vertex, flo
+ 
+ HRESULT SetDebugName(ID3D11DeviceChild *resource, const char *name)
+ {
+-#if defined(_DEBUG)
++#if !defined(__MINGW32__) && defined(_DEBUG)
+     return resource->SetPrivateData(WKPDID_D3DDebugObjectName, strlen(name), name);
+ #else
+     return S_OK;
+diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
+index 1d52705..d63f9b8 100644
+--- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp
+@@ -205,7 +205,7 @@ EGLint Renderer9::initialize()
+     if (ANGLE_ENABLE_D3D9EX && Direct3DCreate9ExPtr && SUCCEEDED(Direct3DCreate9ExPtr(D3D_SDK_VERSION, &mD3d9Ex)))
+     {
+         ASSERT(mD3d9Ex);
+-        mD3d9Ex->QueryInterface(__uuidof(IDirect3D9), reinterpret_cast<void**>(&mD3d9));
++        mD3d9Ex->QueryInterface(IID_IDirect3D9, reinterpret_cast<void**>(&mD3d9));
+         ASSERT(mD3d9);
+     }
+     else
+@@ -329,7 +329,7 @@ EGLint Renderer9::initialize()
+ 
+     if (mD3d9Ex)
+     {
+-        result = mDevice->QueryInterface(__uuidof(IDirect3DDevice9Ex), (void**)&mDeviceEx);
++        result = mDevice->QueryInterface(IID_IDirect3DDevice9Ex, (void**)&mDeviceEx);
+         ASSERT(SUCCEEDED(result));
+     }
+ 
+diff --git a/src/3rdparty/angle/src/libGLESv2/validationES.cpp b/src/3rdparty/angle/src/libGLESv2/validationES.cpp
+index 1b6180d..f79bc97 100644
+--- a/src/3rdparty/angle/src/libGLESv2/validationES.cpp
++++ b/src/3rdparty/angle/src/libGLESv2/validationES.cpp
+@@ -1667,7 +1667,7 @@ bool ValidateDrawElements(Context *context, GLenum mode, GLsizei count, GLenum t
+     // TODO: also disable index checking on back-ends that are robust to out-of-range accesses.
+     if (elementArrayBuffer)
+     {
+-        unsigned int offset = reinterpret_cast<unsigned int>(indices);
++        GLint64 offset = reinterpret_cast<GLint64>(indices);
+         if (!elementArrayBuffer->getIndexRangeCache()->findRange(type, offset, count, indexRangeOut, NULL))
+         {
+             const void *dataPointer = elementArrayBuffer->getImplementation()->getData();
+-- 
+1.9.0.msysgit.0
+
diff --git a/src/angle/patches/0016-ANGLE-WinRT-Call-Trim-when-application-suspends.patch b/src/angle/patches/0016-ANGLE-WinRT-Call-Trim-when-application-suspends.patch
deleted file mode 100644
index bf2a1ad363..0000000000
--- a/src/angle/patches/0016-ANGLE-WinRT-Call-Trim-when-application-suspends.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 158b7642c53843ed954fa667ff23b8746f95f8eb Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Tue, 22 Apr 2014 09:13:57 +0300
-Subject: [PATCH] ANGLE WinRT: Call Trim() when application suspends
-
-This is required by Windows Store Apps to pass certification.
-
-Task-number: QTBUG-38481
-Change-Id: I6dc00431ee5f6c7d4c64111ccc38f46483d3b9a8
----
- .../src/libGLESv2/renderer/d3d11/Renderer11.cpp    | 47 ++++++++++++++++++++++
- .../src/libGLESv2/renderer/d3d11/Renderer11.h      | 15 +++++++
- 2 files changed, 62 insertions(+)
-
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-index 2de477b..e70727c 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.cpp
-@@ -40,6 +40,13 @@
- 
- #include "libEGL/Display.h"
- 
-+#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-+#  include <dxgi1_3.h>
-+#  include <wrl.h>
-+#  include <windows.applicationmodel.core.h>
-+typedef ABI::Windows::Foundation::IEventHandler<ABI::Windows::ApplicationModel::SuspendingEventArgs *> SuspendEventHandler;
-+#endif
-+
- #ifdef _DEBUG
- // this flag enables suppressing some spurious warnings that pop up in certain WebGL samples
- // and conformance tests. to enable all warnings, remove this define.
-@@ -426,9 +433,49 @@ EGLint Renderer11::initialize()
-         }
-     }
- 
-+#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-+    // Monitor when the application suspends so that Trim() can be called
-+    Microsoft::WRL::ComPtr<ABI::Windows::ApplicationModel::Core::ICoreApplication> application;
-+    result = RoGetActivationFactory(Microsoft::WRL::Wrappers::HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
-+                                    IID_PPV_ARGS(&application));
-+    if (FAILED(result))
-+    {
-+        ERR("Error obtaining CoreApplication: 0x%08X", result);
-+        return EGL_NOT_INITIALIZED;
-+    }
-+
-+    EventRegistrationToken cookie;
-+    result = application->add_Suspending(Microsoft::WRL::Callback<SuspendEventHandler>(this, &Renderer11::onSuspend).Get(), &cookie);
-+    if (FAILED(result))
-+    {
-+        ERR("Error setting suspend callback: 0x%08X", result);
-+        return EGL_NOT_INITIALIZED;
-+    }
-+#endif
-+
-     return EGL_SUCCESS;
- }
- 
-+#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-+HRESULT Renderer11::onSuspend(IInspectable *, ABI::Windows::ApplicationModel::ISuspendingEventArgs *)
-+{
-+    if (!mDevice)
-+        return S_OK;
-+
-+    Microsoft::WRL::ComPtr<IDXGIDevice3> dxgiDevice;
-+    HRESULT result = mDevice->QueryInterface(IID_PPV_ARGS(&dxgiDevice));
-+    if (FAILED(result))
-+    {
-+        ERR("Error obtaining DXGIDevice3 on suspend: 0x%08X", result);
-+        return S_OK;
-+    }
-+
-+    dxgiDevice->Trim();
-+
-+    return S_OK;
-+}
-+#endif
-+
- // do any one-time device initialization
- // NOTE: this is also needed after a device lost/reset
- // to reset the scene status and ensure the default states are reset.
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-index a8a722c..773fc26 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/Renderer11.h
-@@ -18,6 +18,17 @@
- #include "libGLESv2/renderer/d3d11/InputLayoutCache.h"
- #include "libGLESv2/renderer/RenderTarget.h"
- 
-+#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-+struct IInspectable;
-+namespace ABI {
-+    namespace Windows {
-+        namespace ApplicationModel {
-+            struct ISuspendingEventArgs;
-+        }
-+    }
-+}
-+#endif
-+
- namespace gl
- {
- class Renderbuffer;
-@@ -202,6 +213,10 @@ class Renderer11 : public Renderer
-                               RenderTarget *drawRenderTarget, bool wholeBufferCopy);
-     ID3D11Texture2D *resolveMultisampledTexture(ID3D11Texture2D *source, unsigned int subresource);
- 
-+#if defined(ANGLE_OS_WINRT) && !defined(ANGLE_OS_WINPHONE)
-+    HRESULT onSuspend(IInspectable *, ABI::Windows::ApplicationModel::ISuspendingEventArgs *);
-+#endif
-+
-     HMODULE mD3d11Module;
-     HMODULE mDxgiModule;
- 
--- 
-1.9.0.msysgit.0
-
diff --git a/src/angle/patches/0017-ANGLE-D3D11-Don-t-use-mipmaps-in-level-9-textures.patch b/src/angle/patches/0017-ANGLE-D3D11-Don-t-use-mipmaps-in-level-9-textures.patch
deleted file mode 100644
index 200a8105de..0000000000
--- a/src/angle/patches/0017-ANGLE-D3D11-Don-t-use-mipmaps-in-level-9-textures.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 9632c57033b514bfb10a0dfa7ba51ec27a944616 Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Tue, 6 May 2014 13:35:14 +0300
-Subject: [PATCH] ANGLE D3D11: Don't use mipmaps in level 9 textures
-
-As the mipmaps levels aren't being generated on level 9, they shouldn't
-be used. Fall back to multisampled textures instead (which is the
-behavior for non-power-of-two textures anyway). This fixes an issue in
-which textured polygons (e.g. QML Images) turn black when scaled down.
-
-Change-Id: I648b8be473dc38f4e1b26724cbaff610e586fdbd
----
- src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
-index fdfbe52..0c981ac 100644
---- a/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
-+++ b/src/3rdparty/angle/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp
-@@ -257,7 +257,7 @@ TextureStorage11_2D::TextureStorage11_2D(Renderer *renderer, int levels, GLenum
-         D3D11_TEXTURE2D_DESC desc;
-         desc.Width = width;      // Compressed texture size constraints?
-         desc.Height = height;
--        desc.MipLevels = (levels > 0) ? levels + mLodOffset : 0;
-+        desc.MipLevels = mRenderer->getFeatureLevel() >= D3D_FEATURE_LEVEL_10_0 ? ((levels > 0) ? levels + mLodOffset : 0) : 1;
-         desc.ArraySize = 1;
-         desc.Format = mTextureFormat;
-         desc.SampleDesc.Count = 1;
--- 
-1.9.0.msysgit.0
-
diff --git a/src/angle/patches/0018-ANGLE-WinRT-Create-swap-chain-using-physical-resolut.patch b/src/angle/patches/0018-ANGLE-WinRT-Create-swap-chain-using-physical-resolut.patch
deleted file mode 100644
index d46851b1e8..0000000000
--- a/src/angle/patches/0018-ANGLE-WinRT-Create-swap-chain-using-physical-resolut.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 59c6d4c94acb4735a73f50f46f91a6cce7389f94 Mon Sep 17 00:00:00 2001
-From: Andrew Knight <andrew.knight@digia.com>
-Date: Wed, 21 May 2014 00:58:21 +0300
-Subject: [PATCH] ANGLE WinRT: Create swap chain using physical resolution
-
-ANGLE has been creating the framebuffer in logical pixels instead of
-physical pixels, which leads to unexpected results and side effects like
-smudged anti-aliased text. This fixes the issue by multiplying the DIP
-resolution by the scale factor, making the framebuffer match the physical
-pixel resolution of the screen.
-
-Change-Id: I3594995ce8e18a31b47e27165f72bc6a391b97b6
----
- src/3rdparty/angle/src/libEGL/Surface.cpp | 97 ++++++++++++++++++++++++++-----
- 1 file changed, 83 insertions(+), 14 deletions(-)
-
-diff --git a/src/3rdparty/angle/src/libEGL/Surface.cpp b/src/3rdparty/angle/src/libEGL/Surface.cpp
-index 3443355..a2e2306 100644
---- a/src/3rdparty/angle/src/libEGL/Surface.cpp
-+++ b/src/3rdparty/angle/src/libEGL/Surface.cpp
-@@ -24,8 +24,83 @@
- #include "libEGL/Display.h"
- 
- #if defined(ANGLE_OS_WINRT)
-+#include <wrl.h>
- #include <windows.foundation.h>
- #include <windows.ui.core.h>
-+#include <windows.graphics.display.h>
-+
-+static bool getCoreWindowSize(const EGLNativeWindowType win, int *width, int *height)
-+{
-+    Microsoft::WRL::ComPtr<ABI::Windows::UI::Core::ICoreWindow> window;
-+    HRESULT hr = win->QueryInterface(IID_PPV_ARGS(&window));
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to cast native display pointer to ICoreWindow *.");
-+        return false;
-+    }
-+
-+#if _MSC_VER<=1700
-+    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayPropertiesStatics> displayInformation;
-+    hr = RoGetActivationFactory(Microsoft::WRL::Wrappers::HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayProperties).Get(),
-+                                IID_PPV_ARGS(&displayInformation));
-+#else
-+    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayInformationStatics> displayInformationFactory;
-+    hr = RoGetActivationFactory(Microsoft::WRL::Wrappers::HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayInformation).Get(),
-+                                IID_PPV_ARGS(&displayInformationFactory));
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to get display information factory.");
-+        return false;
-+    }
-+
-+    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayInformation> displayInformation;
-+    hr = displayInformationFactory->GetForCurrentView(&displayInformation);
-+#endif
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to get display information.");
-+        return false;
-+    }
-+
-+#if defined(ANGLE_OS_WINPHONE) && _MSC_VER>=1800 // Windows Phone 8.1
-+    Microsoft::WRL::ComPtr<ABI::Windows::Graphics::Display::IDisplayInformation2> displayInformation2;
-+    hr = displayInformation.As(&displayInformation2);
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to get extended display information.");
-+        return false;
-+    }
-+
-+    DOUBLE scaleFactor;
-+    hr = displayInformation2->get_RawPixelsPerViewPixel(&scaleFactor);
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to get raw pixels per view pixel.");
-+        return false;
-+    }
-+#else
-+    ABI::Windows::Graphics::Display::ResolutionScale resolutionScale;
-+    hr = displayInformation->get_ResolutionScale(&resolutionScale);
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to get resolution scale.");
-+        return false;
-+    }
-+    DOUBLE scaleFactor = DOUBLE(resolutionScale) / 100.0;
-+#endif
-+
-+    ABI::Windows::Foundation::Rect windowRect;
-+    hr = window->get_Bounds(&windowRect);
-+    if (FAILED(hr))
-+    {
-+        ERR("Failed to get ICoreWindow bounds.");
-+        return false;
-+    }
-+
-+    *width = std::floor(windowRect.Width * scaleFactor + 0.5);
-+    *height = std::floor(windowRect.Height * scaleFactor + 0.5);
-+    return true;
-+}
- #endif
- 
- namespace egl
-@@ -117,14 +192,10 @@ bool Surface::resetSwapChain()
-         width = windowRect.right - windowRect.left;
-         height = windowRect.bottom - windowRect.top;
- #else
--        ABI::Windows::Foundation::Rect windowRect;
--        ABI::Windows::UI::Core::ICoreWindow *window;
--        HRESULT hr = mWindow->QueryInterface(IID_PPV_ARGS(&window));
--        if (FAILED(hr))
-+        if (!getCoreWindowSize(mWindow, &width, &height))
-+        {
-             return false;
--        window->get_Bounds(&windowRect);
--        width = windowRect.Width;
--        height = windowRect.Height;
-+        }
- #endif
-     }
-     else
-@@ -336,14 +407,12 @@ bool Surface::checkForOutOfDateSwapChain()
-     int clientWidth = client.right - client.left;
-     int clientHeight = client.bottom - client.top;
- #else
--    ABI::Windows::Foundation::Rect windowRect;
--    ABI::Windows::UI::Core::ICoreWindow *window;
--    HRESULT hr = mWindow->QueryInterface(IID_PPV_ARGS(&window));
--    if (FAILED(hr))
-+    int clientWidth;
-+    int clientHeight;
-+    if (!getCoreWindowSize(mWindow, &clientWidth, &clientHeight))
-+    {
-         return false;
--    window->get_Bounds(&windowRect);
--    int clientWidth = windowRect.Width;
--    int clientHeight = windowRect.Height;
-+    }
- #endif
-     bool sizeDirty = clientWidth != getWidth() || clientHeight != getHeight();
- 
--- 
-1.9.0.msysgit.0
-
diff --git a/src/angle/src/common/common.pri b/src/angle/src/common/common.pri
index afb8a8675d..8baedc5e4c 100644
--- a/src/angle/src/common/common.pri
+++ b/src/angle/src/common/common.pri
@@ -51,12 +51,15 @@ static: DEFINES *= QT_OPENGL_ES_2_ANGLE_STATIC
 HEADERS +=  \
     $$ANGLE_DIR/src/common/angleutils.h \
     $$ANGLE_DIR/src/common/debug.h \
-    $$ANGLE_DIR/src/common/event_tracer.h \
+    $$ANGLE_DIR/src/common/mathutil.h \
+    $$ANGLE_DIR/src/common/platform.h \
     $$ANGLE_DIR/src/common/RefCountObject.h \
+    $$ANGLE_DIR/src/common/tls.h \
     $$ANGLE_DIR/src/common/version.h
 
 SOURCES +=  \
+    $$ANGLE_DIR/src/common/angleutils.cpp \
     $$ANGLE_DIR/src/common/debug.cpp \
-    $$ANGLE_DIR/src/common/event_tracer.cpp \
-    $$ANGLE_DIR/src/common/RefCountObject.cpp
+    $$ANGLE_DIR/src/common/RefCountObject.cpp \
+    $$ANGLE_DIR/src/common/tls.cpp
 
diff --git a/src/angle/src/compiler/translator.pro b/src/angle/src/compiler/translator.pro
index 18c3978e0f..6f0128d6de 100644
--- a/src/angle/src/compiler/translator.pro
+++ b/src/angle/src/compiler/translator.pro
@@ -16,9 +16,17 @@ BISON_SOURCES = $$ANGLE_DIR/src/compiler/translator/glslang.y
 HEADERS += \
     $$ANGLE_DIR/include/GLSLANG/ResourceLimits.h \
     $$ANGLE_DIR/include/GLSLANG/ShaderLang.h \
+    $$ANGLE_DIR/include/GLSLANG/ShaderVars.h \
+    $$ANGLE_DIR/src/common/angleutils.h \
+    $$ANGLE_DIR/src/common/blocklayout.h \
+    $$ANGLE_DIR/src/common/debug.h \
+    $$ANGLE_DIR/src/common/platform.h \
+    $$ANGLE_DIR/src/common/tls.h \
+    $$ANGLE_DIR/src/common/utilities.h \
     $$ANGLE_DIR/src/compiler/translator/BaseTypes.h \
     $$ANGLE_DIR/src/compiler/translator/BuiltInFunctionEmulator.h \
     $$ANGLE_DIR/src/compiler/translator/Common.h \
+    $$ANGLE_DIR/src/compiler/translator/Compiler.h \
     $$ANGLE_DIR/src/compiler/translator/compilerdebug.h \
     $$ANGLE_DIR/src/compiler/translator/ConstantUnion.h \
     $$ANGLE_DIR/src/compiler/translator/depgraph/DependencyGraph.h \
@@ -29,6 +37,7 @@ HEADERS += \
     $$ANGLE_DIR/src/compiler/translator/Diagnostics.h \
     $$ANGLE_DIR/src/compiler/translator/DirectiveHandler.h \
     $$ANGLE_DIR/src/compiler/translator/ExtensionBehavior.h \
+    $$ANGLE_DIR/src/compiler/translator/FlagStd140Structs.h \
     $$ANGLE_DIR/src/compiler/translator/ForLoopUnroll.h \
     $$ANGLE_DIR/src/compiler/translator/HashNames.h \
     $$ANGLE_DIR/src/compiler/translator/InfoSink.h \
@@ -37,8 +46,8 @@ HEADERS += \
     $$ANGLE_DIR/src/compiler/translator/InitializeParseContext.h \
     $$ANGLE_DIR/src/compiler/translator/InitializeVariables.h \
     $$ANGLE_DIR/src/compiler/translator/intermediate.h \
-    $$ANGLE_DIR/src/compiler/translator/localintermediate.h \
-    $$ANGLE_DIR/src/compiler/translator/MapLongVariableNames.h \
+    $$ANGLE_DIR/src/compiler/translator/IntermNode.h \
+    $$ANGLE_DIR/src/compiler/translator/LoopInfo.h \
     $$ANGLE_DIR/src/compiler/translator/MMap.h \
     $$ANGLE_DIR/src/compiler/translator/NodeSearch.h \
     $$ANGLE_DIR/src/compiler/translator/osinclude.h \
@@ -50,11 +59,14 @@ HEADERS += \
     $$ANGLE_DIR/src/compiler/translator/PoolAlloc.h \
     $$ANGLE_DIR/src/compiler/translator/Pragma.h \
     $$ANGLE_DIR/src/compiler/translator/QualifierAlive.h \
+    $$ANGLE_DIR/src/compiler/translator/RegenerateStructNames.h \
     $$ANGLE_DIR/src/compiler/translator/RemoveTree.h \
     $$ANGLE_DIR/src/compiler/translator/RenameFunction.h \
     $$ANGLE_DIR/src/compiler/translator/RewriteElseBlocks.h \
+    $$ANGLE_DIR/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.h \
     $$ANGLE_DIR/src/compiler/translator/SearchSymbol.h \
     $$ANGLE_DIR/src/compiler/translator/ShHandle.h \
+    $$ANGLE_DIR/src/compiler/translator/StructureHLSL.h \
     $$ANGLE_DIR/src/compiler/translator/SymbolTable.h \
     $$ANGLE_DIR/src/compiler/translator/timing/RestrictFragmentShaderTiming.h \
     $$ANGLE_DIR/src/compiler/translator/timing/RestrictVertexShaderTiming.h \
@@ -64,9 +76,11 @@ HEADERS += \
     $$ANGLE_DIR/src/compiler/translator/Types.h \
     $$ANGLE_DIR/src/compiler/translator/UnfoldShortCircuit.h \
     $$ANGLE_DIR/src/compiler/translator/UnfoldShortCircuitAST.h \
-    $$ANGLE_DIR/src/compiler/translator/Uniform.h \
+    $$ANGLE_DIR/src/compiler/translator/UniformHLSL.h \
+    $$ANGLE_DIR/src/compiler/translator/UtilsHLSL.h \
     $$ANGLE_DIR/src/compiler/translator/util.h \
     $$ANGLE_DIR/src/compiler/translator/ValidateLimitations.h \
+    $$ANGLE_DIR/src/compiler/translator/ValidateOutputs.h \
     $$ANGLE_DIR/src/compiler/translator/VariableInfo.h \
     $$ANGLE_DIR/src/compiler/translator/VariablePacker.h \
     $$ANGLE_DIR/src/compiler/translator/VersionGLSL.h \
@@ -74,6 +88,7 @@ HEADERS += \
 
 
 SOURCES += \
+    $$ANGLE_DIR/src/common/tls.cpp \
     $$ANGLE_DIR/src/compiler/translator/BuiltInFunctionEmulator.cpp \
     $$ANGLE_DIR/src/compiler/translator/CodeGen.cpp \
     $$ANGLE_DIR/src/compiler/translator/Compiler.cpp \
@@ -86,6 +101,7 @@ SOURCES += \
     $$ANGLE_DIR/src/compiler/translator/DetectDiscontinuity.cpp \
     $$ANGLE_DIR/src/compiler/translator/Diagnostics.cpp \
     $$ANGLE_DIR/src/compiler/translator/DirectiveHandler.cpp \
+    $$ANGLE_DIR/src/compiler/translator/FlagStd140Structs.cpp \
     $$ANGLE_DIR/src/compiler/translator/ForLoopUnroll.cpp \
     $$ANGLE_DIR/src/compiler/translator/InfoSink.cpp \
     $$ANGLE_DIR/src/compiler/translator/Initialize.cpp \
@@ -93,9 +109,10 @@ SOURCES += \
     $$ANGLE_DIR/src/compiler/translator/InitializeParseContext.cpp \
     $$ANGLE_DIR/src/compiler/translator/InitializeVariables.cpp \
     $$ANGLE_DIR/src/compiler/translator/Intermediate.cpp \
+    $$ANGLE_DIR/src/compiler/translator/IntermNode.cpp \
     $$ANGLE_DIR/src/compiler/translator/intermOut.cpp \
     $$ANGLE_DIR/src/compiler/translator/IntermTraverse.cpp \
-    $$ANGLE_DIR/src/compiler/translator/MapLongVariableNames.cpp \
+    $$ANGLE_DIR/src/compiler/translator/LoopInfo.cpp \
     $$ANGLE_DIR/src/compiler/translator/OutputESSL.cpp \
     $$ANGLE_DIR/src/compiler/translator/OutputGLSL.cpp \
     $$ANGLE_DIR/src/compiler/translator/OutputGLSLBase.cpp \
@@ -104,33 +121,34 @@ SOURCES += \
     $$ANGLE_DIR/src/compiler/translator/ParseContext.cpp \
     $$ANGLE_DIR/src/compiler/translator/PoolAlloc.cpp \
     $$ANGLE_DIR/src/compiler/translator/QualifierAlive.cpp \
+    $$ANGLE_DIR/src/compiler/translator/RegenerateStructNames.cpp \
     $$ANGLE_DIR/src/compiler/translator/RemoveTree.cpp \
     $$ANGLE_DIR/src/compiler/translator/RewriteElseBlocks.cpp \
+    $$ANGLE_DIR/src/compiler/translator/ScalarizeVecAndMatConstructorArgs.cpp \
     $$ANGLE_DIR/src/compiler/translator/SearchSymbol.cpp \
     $$ANGLE_DIR/src/compiler/translator/ShaderLang.cpp \
+    $$ANGLE_DIR/src/compiler/translator/ShaderVars.cpp \
+    $$ANGLE_DIR/src/compiler/translator/StructureHLSL.cpp \
     $$ANGLE_DIR/src/compiler/translator/SymbolTable.cpp \
     $$ANGLE_DIR/src/compiler/translator/timing/RestrictFragmentShaderTiming.cpp \
     $$ANGLE_DIR/src/compiler/translator/timing/RestrictVertexShaderTiming.cpp \
     $$ANGLE_DIR/src/compiler/translator/TranslatorESSL.cpp \
     $$ANGLE_DIR/src/compiler/translator/TranslatorGLSL.cpp \
     $$ANGLE_DIR/src/compiler/translator/TranslatorHLSL.cpp \
+    $$ANGLE_DIR/src/compiler/translator/Types.cpp \
     $$ANGLE_DIR/src/compiler/translator/UnfoldShortCircuit.cpp \
     $$ANGLE_DIR/src/compiler/translator/UnfoldShortCircuitAST.cpp \
-    $$ANGLE_DIR/src/compiler/translator/Uniform.cpp \
+    $$ANGLE_DIR/src/compiler/translator/UniformHLSL.cpp \
+    $$ANGLE_DIR/src/compiler/translator/UtilsHLSL.cpp \
     $$ANGLE_DIR/src/compiler/translator/util.cpp \
     $$ANGLE_DIR/src/compiler/translator/ValidateLimitations.cpp \
+    $$ANGLE_DIR/src/compiler/translator/ValidateOutputs.cpp \
     $$ANGLE_DIR/src/compiler/translator/VariableInfo.cpp \
     $$ANGLE_DIR/src/compiler/translator/VariablePacker.cpp \
     $$ANGLE_DIR/src/compiler/translator/VersionGLSL.cpp \
     $$ANGLE_DIR/src/third_party/compiler/ArrayBoundsClamper.cpp
 
 
-winrt {
-    SOURCES += $$ANGLE_DIR/src/compiler/translator/ossource_winrt.cpp
-} else {
-    SOURCES += $$ANGLE_DIR/src/compiler/translator/ossource_win.cpp
-}
-
 # NOTE: 'win_flex' and 'bison' can be found in qt5/gnuwin32/bin
 flex.commands = $$addGnuPath(win_flex) --noline --nounistd --outfile=${QMAKE_FILE_BASE}_lex.cpp ${QMAKE_FILE_NAME}
 flex.output = ${QMAKE_FILE_BASE}_lex.cpp
diff --git a/src/angle/src/config.pri b/src/angle/src/config.pri
index aa777c356f..f23bebef44 100644
--- a/src/angle/src/config.pri
+++ b/src/angle/src/config.pri
@@ -37,17 +37,14 @@ DEFINES +=  _WINDOWS \
             NOMINMAX \
             WIN32_LEAN_AND_MEAN=1
 
-# Defines specifying the API version (0x0600 = Vista, 0x0602 = Win8))
-winrt {
-    DEFINES += _WIN32_WINNT=0x0602 WINVER=0x0602
-    DEFINES += ANGLE_ENABLE_UNIVERSAL_BINARY
-} else {
-    DEFINES += _WIN32_WINNT=0x0600 WINVER=0x0600
-    DEFINES += ANGLE_ENABLE_D3D9
-}
+!winrt: DEFINES += ANGLE_ENABLE_D3D9 ANGLE_SKIP_DXGI_1_2_CHECK
+
+CONFIG += angle_d3d11 # Remove to disable D3D11 renderer
+
+equals(QMAKE_TARGET_OS, xp): CONFIG -= angle_d3d11
 
 angle_d3d11 {
-    DEFINES += ANGLE_ENABLE_D3D11
+    DEFINES += ANGLE_ENABLE_D3D11 ANGLE_DEFAULT_D3D11=1
     !build_pass: message("Enabling D3D11 mode for ANGLE")
 }
 
@@ -71,11 +68,12 @@ msvc {
     #   4239: nonstandard extension used : 'token' : conversion from 'type' to 'type'
     #   4244: 'argument' : conversion from 'type1' to 'type2', possible loss of data
     #   4245: 'conversion' : conversion from 'type1' to 'type2', signed/unsigned mismatch
+    #   4267: coversion from 'size_t' to 'int', possible loss of data
     #   4275: non - DLL-interface classkey 'identifier' used as base for DLL-interface classkey 'identifier'
     #   4512: 'class' : assignment operator could not be generated
     #   4702: unreachable code
     QMAKE_CFLAGS_WARN_ON    -= -W3
-    QMAKE_CFLAGS_WARN_ON    += -W4 -wd"4100" -wd"4127" -wd"4189" -wd"4239" -wd"4244" -wd"4245" -wd"4275" -wd"4512" -wd"4702"
+    QMAKE_CFLAGS_WARN_ON    += -W4 -wd"4100" -wd"4127" -wd"4189" -wd"4239" -wd"4244" -wd"4245" -wd"4267" -wd"4275" -wd"4512" -wd"4702"
     # Optimizations
     #   /Oy:   Omits frame pointer (x86 only).
     #   /Gy:   Enables function-level linking.
@@ -93,9 +91,11 @@ gcc {
     QMAKE_CFLAGS_WARN_ON += -Wno-unknown-pragmas -Wno-comment -Wno-missing-field-initializers \
                             -Wno-switch -Wno-unused-parameter -Wno-write-strings -Wno-sign-compare -Wno-missing-braces \
                             -Wno-unused-but-set-variable -Wno-unused-variable -Wno-narrowing -Wno-maybe-uninitialized \
-                            -Wno-strict-aliasing -Wno-type-limits
+                            -Wno-strict-aliasing -Wno-type-limits -Wno-unused-local-typedefs
 
     QMAKE_CXXFLAGS_WARN_ON = $$QMAKE_CFLAGS_WARN_ON -Wno-reorder -Wno-conversion-null -Wno-delete-non-virtual-dtor
+
+    sse2: QMAKE_CXXFLAGS += -march=native
 }
 
 QMAKE_CXXFLAGS_DEBUG = $$QMAKE_CFLAGS_DEBUG
diff --git a/src/angle/src/d3dcompiler/d3dcompiler.pro b/src/angle/src/d3dcompiler/d3dcompiler.pro
deleted file mode 100644
index 04b1de895d..0000000000
--- a/src/angle/src/d3dcompiler/d3dcompiler.pro
+++ /dev/null
@@ -1,17 +0,0 @@
-TARGET = d3dcompiler_qt
-CONFIG += installed
-include(../config.pri)
-
-CONFIG += qt
-QT = core
-DEFINES += QT_NO_CAST_FROM_ASCII QT_NO_CAST_TO_ASCII
-SOURCES += main.cpp
-win32:!winrt: LIBS += -lole32
-
-winrt:equals(WINSDK_VER, 8.1) {
-    DEFINES += D3DCOMPILER_LINKED
-    LIBS += -ld3dcompiler
-}
-
-# __stdcall exports get mangled, so use a def file
-DEF_FILE += $${TARGET}.def
diff --git a/src/angle/src/d3dcompiler/d3dcompiler_qt.def b/src/angle/src/d3dcompiler/d3dcompiler_qt.def
deleted file mode 100644
index 0b8679c8e0..0000000000
--- a/src/angle/src/d3dcompiler/d3dcompiler_qt.def
+++ /dev/null
@@ -1,3 +0,0 @@
-LIBRARY d3dcompiler_qt
-EXPORTS
-    D3DCompile @1
diff --git a/src/angle/src/d3dcompiler/d3dcompiler_qtd.def b/src/angle/src/d3dcompiler/d3dcompiler_qtd.def
deleted file mode 100644
index 0bdd0a1ffd..0000000000
--- a/src/angle/src/d3dcompiler/d3dcompiler_qtd.def
+++ /dev/null
@@ -1,3 +0,0 @@
-LIBRARY d3dcompiler_qtd
-EXPORTS
-    D3DCompile @1
diff --git a/src/angle/src/d3dcompiler/main.cpp b/src/angle/src/d3dcompiler/main.cpp
deleted file mode 100644
index 7647319396..0000000000
--- a/src/angle/src/d3dcompiler/main.cpp
+++ /dev/null
@@ -1,328 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QByteArray>
-#include <QCryptographicHash>
-#include <QDateTime>
-#include <QDir>
-#include <QElapsedTimer>
-#include <QFile>
-#include <QLoggingCategory>
-#include <QStandardPaths>
-#include <QThread>
-
-#include <qt_windows.h>
-#include <d3dcommon.h>
-
-#ifdef D3DCOMPILER_LINKED
-namespace D3D {
-#  include <d3dcompiler.h>
-}
-#endif // D3DCOMPILER_LINKED
-
-Q_LOGGING_CATEGORY(QT_D3DCOMPILER, "qt.angle.d3dcompiler")
-
-namespace D3DCompiler {
-
-typedef HRESULT (WINAPI *D3DCompileFunc)(const void *data, SIZE_T data_size, const char *filename,
-                                         const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
-                                         const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **error_messages);
-static D3DCompileFunc compile;
-
-class Blob : public ID3DBlob
-{
-public:
-    Blob(const QByteArray &data) : m_data(data)
-    {
-        IIDFromString(L"00000000-0000-0000-C000-000000000046", &IID_IUnknown);
-        IIDFromString(L"8BA5FB08-5195-40e2-AC58-0D989C3A0102", &IID_ID3DBlob);
-    }
-
-    virtual ~Blob()
-    {
-    }
-
-    // ID3DBlob
-    LPVOID __stdcall GetBufferPointer()
-    {
-        return m_data.data();
-    }
-
-    SIZE_T __stdcall GetBufferSize()
-    {
-        return m_data.size();
-    }
-
-    // IUnknown
-    HRESULT __stdcall QueryInterface(REFIID riid, void **ppv)
-    {
-        IUnknown *out = 0;
-        if (riid == IID_IUnknown)
-            out = static_cast<IUnknown*>(this);
-        else if (riid == IID_ID3DBlob)
-            out = this;
-
-        *ppv = out;
-        if (!out)
-            return E_NOINTERFACE;
-
-        out->AddRef();
-        return S_OK;
-    }
-
-    ULONG __stdcall AddRef()
-    {
-        return ++m_ref;
-    }
-
-    ULONG __stdcall Release()
-    {
-        ULONG ref = --m_ref;
-        if (!m_ref)
-            delete this;
-
-        return ref;
-    }
-
-private:
-    QByteArray m_data;
-    ULONG m_ref;
-
-    // These symbols might be missing, so define them here
-    IID IID_IUnknown;
-    IID IID_ID3DBlob;
-};
-
-static bool loadCompiler()
-{
-#ifndef D3DCOMPILER_LINKED
-    static HMODULE d3dcompiler = 0;
-    if (!d3dcompiler) {
-        const wchar_t *dllNames[] = {
-            L"d3dcompiler_47.dll",
-            L"d3dcompiler_46.dll",
-            L"d3dcompiler_45.dll",
-            L"d3dcompiler_44.dll",
-            L"d3dcompiler_43.dll",
-            0
-        };
-        for (int i = 0; const wchar_t *name = dllNames[i]; ++i) {
-#ifndef Q_OS_WINRT
-            d3dcompiler = LoadLibrary(name);
-#else
-            d3dcompiler = LoadPackagedLibrary(name, NULL);
-#endif
-            if (d3dcompiler) {
-                qCDebug(QT_D3DCOMPILER) << "Found" << QString::fromWCharArray(name);
-                D3DCompiler::compile = reinterpret_cast<D3DCompiler::D3DCompileFunc>(GetProcAddress(d3dcompiler, "D3DCompile"));
-                if (D3DCompiler::compile) {
-                    qCDebug(QT_D3DCOMPILER) << "Loaded" << QString::fromWCharArray(name);
-                    break;
-                }
-                qCDebug(QT_D3DCOMPILER) << "Failed to load" << QString::fromWCharArray(name);
-            }
-        }
-
-        if (!d3dcompiler)
-            qCDebug(QT_D3DCOMPILER) << "Unable to load D3D shader compiler.";
-    }
-#else // !D3DCOMPILER_LINKED
-    compile = &D3D::D3DCompile;
-#endif // D3DCOMPILER_LINKED
-    return bool(compile);
-}
-
-static QString cacheKeyFor(const void *data)
-{
-    return QString::fromUtf8(QCryptographicHash::hash(reinterpret_cast<const char *>(data), QCryptographicHash::Sha1).toHex());
-}
-
-} // namespace D3DCompiler
-
-#ifdef __MINGW32__
-extern "C"
-#endif
-__declspec(dllexport) HRESULT WINAPI D3DCompile(
-        const void *, SIZE_T, const char *, const D3D_SHADER_MACRO *, ID3DInclude *,
-        const char *, const char *, UINT, UINT, ID3DBlob **, ID3DBlob **);
-
-HRESULT WINAPI D3DCompile(
-        const void *data, SIZE_T data_size, const char *filename,
-        const D3D_SHADER_MACRO *defines, ID3DInclude *include, const char *entrypoint,
-        const char *target, UINT sflags, UINT eflags, ID3DBlob **shader, ID3DBlob **errorMsgs)
-{
-    // Shortcut to compile using the runtime compiler if it is available
-    static bool compilerAvailable =
-            !qgetenv("QT_D3DCOMPILER_DISABLE_DLL").toInt() && D3DCompiler::loadCompiler();
-    if (compilerAvailable) {
-        HRESULT hr = D3DCompiler::compile(data, data_size, filename, defines, include, entrypoint,
-                                          target, sflags, eflags, shader, errorMsgs);
-        return hr;
-    }
-
-    static bool initialized = false;
-    static QStringList binaryPaths;
-    static QString sourcePath;
-    if (!initialized) {
-        // Precompiled directory
-        QString precompiledPath;
-        if (qEnvironmentVariableIsSet("QT_D3DCOMPILER_BINARY_DIR"))
-            precompiledPath = QString::fromLocal8Bit(qgetenv("QT_D3DCOMPILER_BINARY_DIR"));
-        else
-            precompiledPath = QStringLiteral(":/qt.d3dcompiler/"); // Default QRC path
-        if (QDir(precompiledPath).exists())
-            binaryPaths.append(precompiledPath);
-
-        // Service directory
-        QString base;
-        if (qEnvironmentVariableIsSet("QT_D3DCOMPILER_DIR"))
-            base = QString::fromLocal8Bit(qgetenv("QT_D3DCOMPILER_DIR"));
-
-        if (base.isEmpty()) {
-            const QString location = QStandardPaths::writableLocation(QStandardPaths::DataLocation);
-            if (!location.isEmpty())
-                base = location + QStringLiteral("/d3dcompiler");
-        }
-
-        // Create the directory structure
-        QDir baseDir(base);
-        if (!baseDir.exists()) {
-            baseDir.cdUp();
-            if (!baseDir.mkdir(QStringLiteral("d3dcompiler"))) {
-                qCWarning(QT_D3DCOMPILER) << "Unable to create shader base directory:"
-                                          << QDir::toNativeSeparators(baseDir.absolutePath());
-                if (binaryPaths.isEmpty()) // No possibility to get a shader, abort
-                    return E_FAIL;
-            }
-            baseDir.cd(QStringLiteral("d3dcompiler"));
-        }
-
-        if (!baseDir.exists(QStringLiteral("binary")) && !baseDir.mkdir(QStringLiteral("binary"))) {
-            qCWarning(QT_D3DCOMPILER) << "Unable to create shader binary directory:"
-                                      << QDir::toNativeSeparators(baseDir.absoluteFilePath(QStringLiteral("binary")));
-            if (binaryPaths.isEmpty()) // No possibility to get a shader, abort
-                return E_FAIL;
-        } else {
-            binaryPaths.append(baseDir.absoluteFilePath(QStringLiteral("binary/")));
-        }
-
-        if (!baseDir.exists(QStringLiteral("source")) && !baseDir.mkdir(QStringLiteral("source"))) {
-            qCWarning(QT_D3DCOMPILER) << "Unable to create shader source directory:"
-                                      << QDir::toNativeSeparators(baseDir.absoluteFilePath(QStringLiteral("source")));
-        } else {
-            sourcePath = baseDir.absoluteFilePath(QStringLiteral("source/"));
-        }
-
-        initialized = true;
-    }
-
-    QByteArray macros;
-    if (const D3D_SHADER_MACRO *macro = defines) {
-        while (macro) {
-            macros.append('#').append(macro->Name).append(' ').append(macro->Definition).append('\n');
-            ++macro;
-        }
-    }
-
-    const QByteArray sourceData = macros + QByteArray::fromRawData(reinterpret_cast<const char *>(data), data_size);
-    const QString fileName = D3DCompiler::cacheKeyFor(sourceData)
-            + QLatin1Char('!') + QString::fromUtf8(entrypoint)
-            + QLatin1Char('!') + QString::fromUtf8(target)
-            + QLatin1Char('!') + QString::number(sflags);
-
-    // Check if pre-compiled shader blob is available
-    foreach (const QString &path, binaryPaths) {
-        QString blobName = path + fileName;
-        QFile blob(blobName);
-        while (!blob.exists()) {
-            // Progressively drop optional parts
-            blobName.truncate(blobName.lastIndexOf(QLatin1Char('!')));
-            if (blobName.isEmpty())
-                break;
-            blob.setFileName(blobName);
-        }
-        if (blob.exists()) {
-            if (blob.open(QFile::ReadOnly)) {
-                qCDebug(QT_D3DCOMPILER) << "Opening precompiled shader blob at" << blob.fileName();
-                *shader = new D3DCompiler::Blob(blob.readAll());
-                return S_FALSE;
-            }
-            qCDebug(QT_D3DCOMPILER) << "Found, but unable to open, precompiled shader blob at" << blob.fileName();
-            break;
-        }
-    }
-
-    // Shader blob is not available; write out shader source
-    if (!sourcePath.isEmpty()) {
-        // Dump source to source path; wait for blob to appear
-        QFile source(sourcePath + fileName);
-        if (!source.open(QFile::WriteOnly)) {
-            qCDebug(QT_D3DCOMPILER) << "Unable to write shader source to file:" << source.fileName() << source.errorString();
-            return E_ACCESSDENIED;
-        }
-
-        source.write(sourceData);
-        qCDebug(QT_D3DCOMPILER) << "Wrote shader source, waiting for blob:" << source.fileName();
-        source.close();
-
-        qint64 timeout = qgetenv("QT_D3DCOMPILER_TIMEOUT").toLong();
-        if (!timeout)
-            timeout = 3000;
-
-        QElapsedTimer timer;
-        timer.start();
-        QFile blob(binaryPaths.last() + fileName);
-        while (!(blob.exists() && blob.open(QFile::ReadOnly)) && timer.elapsed() < timeout)
-            QThread::msleep(100);
-
-        if (blob.isOpen()) {
-            *shader = new D3DCompiler::Blob(blob.readAll());
-            return S_FALSE;
-        }
-
-        qCDebug(QT_D3DCOMPILER) << "Shader blob failed to materialize after" << timeout << "ms.";
-        *errorMsgs = new D3DCompiler::Blob("Shader compilation timeout.");
-        return E_ABORT;
-    }
-
-    *errorMsgs = new D3DCompiler::Blob("No shader compiler or service could be found.");
-    return E_FAIL;
-}
diff --git a/src/angle/src/libEGL/libEGL.pro b/src/angle/src/libEGL/libEGL.pro
index dc286ca11d..48ce7055fd 100644
--- a/src/angle/src/libEGL/libEGL.pro
+++ b/src/angle/src/libEGL/libEGL.pro
@@ -1,10 +1,7 @@
 CONFIG += installed
 include(../common/common.pri)
 
-angle_d3d11: \
-    LIBS_PRIVATE += -ld3d11
-!winrt: \
-    LIBS_PRIVATE += -ld3d9
+winrt: LIBS_PRIVATE += -ld3d11
 
 LIBS_PRIVATE += -ldxguid -L$$QT_BUILD_TREE/lib -l$$qtLibraryTarget(libGLESv2)
 
diff --git a/src/angle/src/libGLESv2/libGLESv2.pro b/src/angle/src/libGLESv2/libGLESv2.pro
index 70c58dc5a4..c0f7982e6c 100644
--- a/src/angle/src/libGLESv2/libGLESv2.pro
+++ b/src/angle/src/libGLESv2/libGLESv2.pro
@@ -4,10 +4,10 @@ include(../common/common.pri)
 INCLUDEPATH += $$OUT_PWD/.. $$ANGLE_DIR/src/libGLESv2
 
 # Remember to adapt tools/configure/configureapp.cpp if the Direct X version changes.
-angle_d3d11: \
-    LIBS_PRIVATE += -ldxgi -ld3d11
 !winrt: \
     LIBS_PRIVATE += -ld3d9
+winrt: \
+    LIBS_PRIVATE += -ld3dcompiler -ldxgi -ld3d11
 
 LIBS_PRIVATE += -ldxguid
 
@@ -21,138 +21,212 @@ for(libname, STATICLIBS) {
 }
 
 HEADERS += \
-    $$ANGLE_DIR/src/third_party/murmurhash/MurmurHash3.h \
+    $$ANGLE_DIR/src/common/blocklayout.h \
+    $$ANGLE_DIR/src/common/shadervars.h \
+    $$ANGLE_DIR/src/common/utilities.h \
+    $$ANGLE_DIR/src/libGLESv2/angletypes.h \
     $$ANGLE_DIR/src/libGLESv2/BinaryStream.h \
     $$ANGLE_DIR/src/libGLESv2/Buffer.h \
+    $$ANGLE_DIR/src/libGLESv2/Caps.h \
     $$ANGLE_DIR/src/libGLESv2/Context.h \
+    $$ANGLE_DIR/src/libGLESv2/Error.h \
     $$ANGLE_DIR/src/libGLESv2/Fence.h \
+    $$ANGLE_DIR/src/libGLESv2/formatutils.h \
     $$ANGLE_DIR/src/libGLESv2/Framebuffer.h \
+    $$ANGLE_DIR/src/libGLESv2/FramebufferAttachment.h \
     $$ANGLE_DIR/src/libGLESv2/HandleAllocator.h \
+    $$ANGLE_DIR/src/libGLESv2/ImageIndex.h \
     $$ANGLE_DIR/src/libGLESv2/main.h \
-    $$ANGLE_DIR/src/libGLESv2/mathutil.h \
     $$ANGLE_DIR/src/libGLESv2/Program.h \
     $$ANGLE_DIR/src/libGLESv2/ProgramBinary.h \
     $$ANGLE_DIR/src/libGLESv2/Query.h \
+    $$ANGLE_DIR/src/libGLESv2/queryconversions.h \
     $$ANGLE_DIR/src/libGLESv2/Renderbuffer.h \
-    $$ANGLE_DIR/src/libGLESv2/resource.h \
-    $$ANGLE_DIR/src/libGLESv2/ResourceManager.h \
-    $$ANGLE_DIR/src/libGLESv2/Shader.h \
-    $$ANGLE_DIR/src/libGLESv2/Texture.h \
-    $$ANGLE_DIR/src/libGLESv2/Uniform.h \
-    $$ANGLE_DIR/src/libGLESv2/utilities.h \
-    $$ANGLE_DIR/src/libGLESv2/vertexconversion.h \
-    $$ANGLE_DIR/src/libGLESv2/precompiled.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/BufferStorage.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/BufferImpl.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/copyimage.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/copyvertex.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/BufferD3D.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/DynamicHLSL.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/HLSLCompiler.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/ImageD3D.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/IndexBuffer.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/IndexDataManager.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/MemoryBuffer.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/ProgramD3D.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/ShaderD3D.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/TextureD3D.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/TextureStorage.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/VertexArrayImpl.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/VertexBuffer.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/vertexconversion.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/VertexDataManager.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/FenceImpl.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/generatemip.h \
     $$ANGLE_DIR/src/libGLESv2/renderer/Image.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/IndexBuffer.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/IndexDataManager.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/imageformats.h \
     $$ANGLE_DIR/src/libGLESv2/renderer/IndexCacheRange.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/loadimage.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/ProgramImpl.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/QueryImpl.h \
     $$ANGLE_DIR/src/libGLESv2/renderer/Renderer.h \
     $$ANGLE_DIR/src/libGLESv2/renderer/RenderTarget.h \
     $$ANGLE_DIR/src/libGLESv2/renderer/ShaderExecutable.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/ShaderImpl.h \
     $$ANGLE_DIR/src/libGLESv2/renderer/SwapChain.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/TextureStorage.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/VertexBuffer.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/VertexDataManager.h \
-    $$ANGLE_DIR/src/libGLESv2/renderer/VertexDeclarationCache.h
+    $$ANGLE_DIR/src/libGLESv2/renderer/TextureImpl.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/TextureFeedbackImpl.h \
+    $$ANGLE_DIR/src/libGLESv2/renderer/VertexDeclarationCache.h \
+    $$ANGLE_DIR/src/libGLESv2/resource.h \
+    $$ANGLE_DIR/src/libGLESv2/ResourceManager.h \
+    $$ANGLE_DIR/src/libGLESv2/Sampler.h \
+    $$ANGLE_DIR/src/libGLESv2/Shader.h \
+    $$ANGLE_DIR/src/libGLESv2/State.h \
+    $$ANGLE_DIR/src/libGLESv2/Texture.h \
+    $$ANGLE_DIR/src/libGLESv2/TransformFeedback.h \
+    $$ANGLE_DIR/src/libGLESv2/Uniform.h \
+    $$ANGLE_DIR/src/libGLESv2/validationES.h \
+    $$ANGLE_DIR/src/libGLESv2/validationES2.h \
+    $$ANGLE_DIR/src/libGLESv2/validationES3.h \
+    $$ANGLE_DIR/src/libGLESv2/VertexArray.h \
+    $$ANGLE_DIR/src/libGLESv2/VertexAttribute.h \
+    $$ANGLE_DIR/src/libGLESv2/vertexconversion.h \
+    $$ANGLE_DIR/src/third_party/murmurhash/MurmurHash3.h \
 
 SOURCES += \
+    $$ANGLE_DIR/src/common/blocklayout.cpp \
+    $$ANGLE_DIR/src/common/mathutil.cpp \
+    $$ANGLE_DIR/src/common/utilities.cpp \
     $$ANGLE_DIR/src/third_party/murmurhash/MurmurHash3.cpp \
+    $$ANGLE_DIR/src/libGLESv2/angletypes.cpp \
     $$ANGLE_DIR/src/libGLESv2/Buffer.cpp \
+    $$ANGLE_DIR/src/libGLESv2/Caps.cpp \
     $$ANGLE_DIR/src/libGLESv2/Context.cpp \
+    $$ANGLE_DIR/src/libGLESv2/Error.cpp \
     $$ANGLE_DIR/src/libGLESv2/Fence.cpp \
     $$ANGLE_DIR/src/libGLESv2/Float16ToFloat32.cpp \
     $$ANGLE_DIR/src/libGLESv2/Framebuffer.cpp \
+    $$ANGLE_DIR/src/libGLESv2/FramebufferAttachment.cpp \
+    $$ANGLE_DIR/src/libGLESv2/formatutils.cpp \
     $$ANGLE_DIR/src/libGLESv2/HandleAllocator.cpp \
+    $$ANGLE_DIR/src/libGLESv2/ImageIndex.cpp \
     $$ANGLE_DIR/src/libGLESv2/libGLESv2.cpp \
     $$ANGLE_DIR/src/libGLESv2/main.cpp \
     $$ANGLE_DIR/src/libGLESv2/Program.cpp \
     $$ANGLE_DIR/src/libGLESv2/ProgramBinary.cpp \
     $$ANGLE_DIR/src/libGLESv2/Query.cpp \
+    $$ANGLE_DIR/src/libGLESv2/queryconversions.cpp \
     $$ANGLE_DIR/src/libGLESv2/Renderbuffer.cpp \
     $$ANGLE_DIR/src/libGLESv2/ResourceManager.cpp \
+    $$ANGLE_DIR/src/libGLESv2/Sampler.cpp \
     $$ANGLE_DIR/src/libGLESv2/Shader.cpp \
+    $$ANGLE_DIR/src/libGLESv2/State.cpp \
     $$ANGLE_DIR/src/libGLESv2/Texture.cpp \
+    $$ANGLE_DIR/src/libGLESv2/TransformFeedback.cpp \
     $$ANGLE_DIR/src/libGLESv2/Uniform.cpp \
-    $$ANGLE_DIR/src/libGLESv2/utilities.cpp \
-    $$ANGLE_DIR/src/libGLESv2/precompiled.cpp \
-    $$ANGLE_DIR/src/libGLESv2/renderer/BufferStorage.cpp \
+    $$ANGLE_DIR/src/libGLESv2/validationES.cpp \
+    $$ANGLE_DIR/src/libGLESv2/validationES2.cpp \
+    $$ANGLE_DIR/src/libGLESv2/validationES3.cpp \
+    $$ANGLE_DIR/src/libGLESv2/VertexArray.cpp \
+    $$ANGLE_DIR/src/libGLESv2/VertexAttribute.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/copyimage.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/loadimage.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/loadimageSSE2.cpp \
     $$ANGLE_DIR/src/libGLESv2/renderer/Image.cpp \
-    $$ANGLE_DIR/src/libGLESv2/renderer/IndexBuffer.cpp \
-    $$ANGLE_DIR/src/libGLESv2/renderer/IndexDataManager.cpp \
     $$ANGLE_DIR/src/libGLESv2/renderer/IndexRangeCache.cpp \
     $$ANGLE_DIR/src/libGLESv2/renderer/Renderer.cpp \
-    $$ANGLE_DIR/src/libGLESv2/renderer/TextureStorage.cpp \
-    $$ANGLE_DIR/src/libGLESv2/renderer/VertexBuffer.cpp \
-    $$ANGLE_DIR/src/libGLESv2/renderer/VertexDataManager.cpp
-
-SSE2_SOURCES += $$ANGLE_DIR/src/libGLESv2/renderer/ImageSSE2.cpp
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/BufferD3D.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/DynamicHLSL.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/HLSLCompiler.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/ImageD3D.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/IndexBuffer.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/IndexDataManager.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/MemoryBuffer.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/ProgramD3D.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/ShaderD3D.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/TextureD3D.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/TextureStorage.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/TransformFeedbackD3D.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/VertexBuffer.cpp \
+    $$ANGLE_DIR/src/libGLESv2/renderer/d3d/VertexDataManager.cpp
 
 angle_d3d11 {
     HEADERS += \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/BufferStorage11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Fence11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Image11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/IndexBuffer11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/InputLayoutCache.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Query11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Renderer11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/renderer11_utils.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/RenderTarget11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/RenderStateCache.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/ShaderExecutable11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/SwapChain11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/TextureStorage11.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/VertexBuffer11.h
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Blit11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Buffer11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Clear11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Fence11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/formatutils11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Image11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Query11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Renderer11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/RenderTarget11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/RenderStateCache.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.h
 
     SOURCES += \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/BufferStorage11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Fence11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Image11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/IndexBuffer11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/InputLayoutCache.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Query11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/Renderer11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/renderer11_utils.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/RenderTarget11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/RenderStateCache.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/ShaderExecutable11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/SwapChain11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/TextureStorage11.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/VertexBuffer11.cpp
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Blit11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Buffer11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Clear11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Fence11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/formatutils11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Image11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/IndexBuffer11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/InputLayoutCache.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/PixelTransfer11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Query11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/Renderer11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/renderer11_utils.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/RenderTarget11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/RenderStateCache.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/ShaderExecutable11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/SwapChain11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/TextureStorage11.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/VertexBuffer11.cpp
 }
 
 !winrt {
     HEADERS += \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Blit.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/BufferStorage9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Fence9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Image9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/IndexBuffer9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Query9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Renderer9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/renderer9_utils.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/RenderTarget9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/ShaderExecutable9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/SwapChain9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/TextureStorage9.h \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/VertexBuffer9.h
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Blit9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Buffer9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Fence9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/formatutils9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Image9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Query9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Renderer9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/TextureStorage9.h \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.h \
+        $$ANGLE_DIR/src/third_party/systeminfo/SystemInfo.h
 
     SOURCES += \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Blit.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/BufferStorage9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Fence9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Image9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/IndexBuffer9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Query9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/Renderer9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/renderer9_utils.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/RenderTarget9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/ShaderExecutable9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/SwapChain9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/TextureStorage9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/VertexBuffer9.cpp \
-        $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/VertexDeclarationCache.cpp
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Blit9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Buffer9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Fence9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/formatutils9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Image9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/IndexBuffer9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Query9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/Renderer9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/renderer9_utils.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/RenderTarget9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/ShaderExecutable9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/SwapChain9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/TextureStorage9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/VertexBuffer9.cpp \
+        $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/VertexDeclarationCache.cpp \
+        $$ANGLE_DIR/src/third_party/systeminfo/SystemInfo.cpp
 }
 
 !static {
@@ -166,73 +240,82 @@ float_converter.commands = python $$ANGLE_DIR/src/libGLESv2/Float16ToFloat32.py
 QMAKE_EXTRA_TARGETS += float_converter
 
 # Generate the shader header files.
-PS_BLIT_INPUT = $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/shaders/Blit.ps
-VS_BLIT_INPUT = $$ANGLE_DIR/src/libGLESv2/renderer/d3d9/shaders/Blit.vs
-PASSTHROUGH_INPUT = $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/shaders/Passthrough11.hlsl
-CLEAR_INPUT = $$ANGLE_DIR/src/libGLESv2/renderer/d3d11/shaders/Clear11.hlsl
-PIXEL_SHADERS_BLIT = passthroughps luminanceps componentmaskps
-PIXEL_SHADERS_PASSTHROUGH = PassthroughRGBA PassthroughRGB \
-                            PassthroughLum PassthroughLumAlpha
-PIXEL_SHADERS_CLEAR = ClearSingle ClearMultiple
-VERTEX_SHADERS_BLIT = standardvs flipyvs
-VERTEX_SHADERS_PASSTHROUGH = Passthrough
-VERTEX_SHADERS_CLEAR = Clear
-SHADER_DIR_9 = $$OUT_PWD/renderer/d3d9/shaders/compiled
-SHADER_DIR_11 = $$OUT_PWD/renderer/d3d11/shaders/compiled
-
-for (ps, PIXEL_SHADERS_BLIT) {
-    fxc_ps_$${ps}.commands = $$FXC /nologo /E $$ps /T ps_2_0 /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-    fxc_ps_$${ps}.output = $$SHADER_DIR_9/$${ps}.h
-    fxc_ps_$${ps}.input = PS_BLIT_INPUT
-    fxc_ps_$${ps}.dependency_type = TYPE_C
-    fxc_ps_$${ps}.variable_out = HEADERS
-    fxc_ps_$${ps}.CONFIG += target_predeps
-    !winrt: QMAKE_EXTRA_COMPILERS += fxc_ps_$${ps}
-}
-for (ps, PIXEL_SHADERS_PASSTHROUGH) {
-    fxc_ps_$${ps}.commands = $$FXC /nologo /E PS_$$ps /T ps_4_0_level_9_1 /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-    fxc_ps_$${ps}.output = $$SHADER_DIR_11/$${ps}11ps.h
-    fxc_ps_$${ps}.input = PASSTHROUGH_INPUT
-    fxc_ps_$${ps}.dependency_type = TYPE_C
-    fxc_ps_$${ps}.variable_out = HEADERS
-    fxc_ps_$${ps}.CONFIG += target_predeps
-    angle_d3d11: QMAKE_EXTRA_COMPILERS += fxc_ps_$${ps}
-}
-for (ps, PIXEL_SHADERS_CLEAR) {
-    fxc_ps_$${ps}.commands = $$FXC /nologo /E PS_$$ps /T ps_4_0_level_9_1 /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-    fxc_ps_$${ps}.output = $$SHADER_DIR_11/$${ps}11ps.h
-    fxc_ps_$${ps}.input = CLEAR_INPUT
-    fxc_ps_$${ps}.dependency_type = TYPE_C
-    fxc_ps_$${ps}.variable_out = HEADERS
-    fxc_ps_$${ps}.CONFIG += target_predeps
-    angle_d3d11: QMAKE_EXTRA_COMPILERS += fxc_ps_$${ps}
-}
-for (vs, VERTEX_SHADERS_BLIT) {
-    fxc_vs_$${vs}.commands = $$FXC /nologo /E $$vs /T vs_2_0 /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-    fxc_vs_$${vs}.output = $$SHADER_DIR_9/$${vs}.h
-    fxc_vs_$${vs}.input = VS_BLIT_INPUT
-    fxc_vs_$${vs}.dependency_type = TYPE_C
-    fxc_vs_$${vs}.variable_out = HEADERS
-    fxc_vs_$${vs}.CONFIG += target_predeps
-    !winrt: QMAKE_EXTRA_COMPILERS += fxc_vs_$${vs}
-}
-for (vs, VERTEX_SHADERS_PASSTHROUGH) {
-    fxc_vs_$${vs}.commands = $$FXC /nologo /E VS_$$vs /T vs_4_0_level_9_1 /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-    fxc_vs_$${vs}.output = $$SHADER_DIR_11/$${vs}11vs.h
-    fxc_vs_$${vs}.input = PASSTHROUGH_INPUT
-    fxc_vs_$${vs}.dependency_type = TYPE_C
-    fxc_vs_$${vs}.variable_out = HEADERS
-    fxc_vs_$${vs}.CONFIG += target_predeps
-    angle_d3d11: QMAKE_EXTRA_COMPILERS += fxc_vs_$${vs}
-}
-for (vs, VERTEX_SHADERS_CLEAR) {
-    fxc_vs_$${vs}.commands = $$FXC /nologo /E VS_$$vs /T vs_4_0_level_9_1 /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-    fxc_vs_$${vs}.output = $$SHADER_DIR_11/$${vs}11vs.h
-    fxc_vs_$${vs}.input = CLEAR_INPUT
-    fxc_vs_$${vs}.dependency_type = TYPE_C
-    fxc_vs_$${vs}.variable_out = HEADERS
-    fxc_vs_$${vs}.CONFIG += target_predeps
-    angle_d3d11: QMAKE_EXTRA_COMPILERS += fxc_vs_$${vs}
+SHADER9_INPUT_DIR = $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d9/shaders
+SHADER11_INPUT_DIR = $$ANGLE_DIR/src/libGLESv2/renderer/d3d/d3d11/shaders
+
+BLITPS_INPUT = $$SHADER9_INPUT_DIR/Blit.ps
+BLITPS.shaders = PS_passthrough PS_luminance PS_componentmask
+BLITPS.profile = 2_0
+
+BLITVS_INPUT = $$SHADER9_INPUT_DIR/Blit.vs
+BLITVS.shaders = VS_standard VS_flipy
+BLITVS.profile = 2_0
+
+BUFFERTOTEXTURE_INPUT = $$SHADER11_INPUT_DIR/BufferToTexture11.hlsl
+BUFFERTOTEXTURE.shaders = \
+    PS_BufferToTexture_4F PS_BufferToTexture_4I PS_BufferToTexture_4UI \
+    VS_BufferToTexture GS_BufferToTexture
+BUFFERTOTEXTURE.profile = 4_0
+
+CLEAR_INPUT = $$SHADER11_INPUT_DIR/Clear11.hlsl
+CLEAR.shaders = \
+    PS_ClearUint PS_ClearSint \
+    VS_ClearUint VS_ClearSint
+CLEAR.shaders_compat = PS_ClearFloat VS_ClearFloat
+CLEAR.profile = 4_0
+
+PASSTHROUGH2D_INPUT = $$SHADER11_INPUT_DIR/Passthrough2D11.hlsl
+PASSTHROUGH2D.shaders = \
+    PS_PassthroughRGBA2DUI PS_PassthroughRGBA2DI \
+    PS_PassthroughRGB2DUI PS_PassthroughRGB2DI \
+    PS_PassthroughRG2DUI PS_PassthroughRG2DI \
+    PS_PassthroughR2DUI PS_PassthroughR2DI \
+    PS_PassthroughDepth2D
+PASSTHROUGH2D.shaders_compat = \
+    PS_PassthroughRGBA2D PS_PassthroughRGB2D \
+    PS_PassthroughRG2D PS_PassthroughR2D \
+    PS_PassthroughLum2D PS_PassthroughLumAlpha2D \
+    VS_Passthrough2D
+PASSTHROUGH2D.profile = 4_0
+
+PASSTHROUGH3D_INPUT = $$SHADER11_INPUT_DIR/Passthrough3D11.hlsl
+PASSTHROUGH3D.shaders = \
+    PS_PassthroughRGBA3D PS_PassthroughRGBA3DUI PS_PassthroughRGBA3DI \
+    PS_PassthroughRGB3D PS_PassthroughRGB3DUI PS_PassthroughRGB3DI \
+    PS_PassthroughRG3D PS_PassthroughRG3DUI PS_PassthroughRG3DI \
+    PS_PassthroughR3D PS_PassthroughR3DUI PS_PassthroughR3DI \
+    PS_PassthroughLum3D PS_PassthroughLumAlpha3D \
+    VS_Passthrough3D GS_Passthrough3D
+PASSTHROUGH3D.profile = 4_0
+
+SWIZZLE_INPUT = $$SHADER11_INPUT_DIR/Swizzle11.hlsl
+SWIZZLE.shaders = \
+    PS_SwizzleI2D PS_SwizzleUI2D \
+    PS_SwizzleF3D PS_SwizzleI3D PS_SwizzleUI3D \
+    PS_SwizzleF2DArray PS_SwizzleI2DArray PS_SwizzleUI2DArray
+SWIZZLE.shaders_compat = PS_SwizzleF2D
+SWIZZLE.profile = 4_0
+
+angle_d3d11: FXC_JOBS = BUFFERTOTEXTURE CLEAR PASSTHROUGH2D PASSTHROUGH3D SWIZZLE
+!winrt: FXC_JOBS += BLITPS BLITVS
+
+for (JOB, FXC_JOBS) {
+    INPUT = $${JOB}_INPUT
+    OUT_DIR = $$OUT_PWD/$$relative_path($$dirname($$INPUT), $$ANGLE_DIR/src/libGLESv2)/compiled
+    SHADERS_COMPAT = $$eval($${JOB}.shaders_compat)
+    SHADERS = $$eval($${JOB}.shaders) $$SHADERS_COMPAT
+    for(SHADER, SHADERS) {
+        TYPE = $$lower($$section(SHADER, _, 0, 0))
+        PROFILE = $${TYPE}_$$eval($${JOB}.profile)
+        contains(SHADERS_COMPAT, $$SHADER): PROFILE = $${PROFILE}_level_9_1
+        fxc_$${SHADER}_$${PROFILE}.commands = $$FXC /nologo /E $${SHADER} /T $${PROFILE} /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
+        fxc_$${SHADER}_$${PROFILE}.output = $$OUT_DIR/$$section(SHADER, _, 1)$${TYPE}.h
+        fxc_$${SHADER}_$${PROFILE}.input = $$INPUT
+        fxc_$${SHADER}_$${PROFILE}.dependency_type = TYPE_C
+        fxc_$${SHADER}_$${PROFILE}.variable_out = HEADERS
+        fxc_$${SHADER}_$${PROFILE}.CONFIG += target_predeps
+        QMAKE_EXTRA_COMPILERS += fxc_$${SHADER}_$${PROFILE}
+    }
 }
 
 khr_headers.files = $$ANGLE_DIR/include/KHR/khrplatform.h
@@ -242,4 +325,10 @@ gles2_headers.files = \
     $$ANGLE_DIR/include/GLES2/gl2ext.h \
     $$ANGLE_DIR/include/GLES2/gl2platform.h
 gles2_headers.path = $$[QT_INSTALL_HEADERS]/QtANGLE/GLES2
+gles3_headers.files = \
+    $$ANGLE_DIR/include/GLES3/gl3.h \
+    $$ANGLE_DIR/include/GLES3/gl3ext.h \
+    $$ANGLE_DIR/include/GLES3/gl3platform.h
+gles3_headers.path = $$[QT_INSTALL_HEADERS]/QtANGLE/GLES3
 INSTALLS += khr_headers gles2_headers
+angle_d3d11: INSTALLS += gles3_headers
diff --git a/src/angle/src/src.pro b/src/angle/src/src.pro
index 2b7d523207..d1f5f57591 100644
--- a/src/angle/src/src.pro
+++ b/src/angle/src/src.pro
@@ -1,4 +1,3 @@
 TEMPLATE = subdirs
 SUBDIRS += compiler libGLESv2 libEGL
-angle_d3d11: SUBDIRS += d3dcompiler
 CONFIG += ordered
diff --git a/src/concurrent/doc/qtconcurrent.qdocconf b/src/concurrent/doc/qtconcurrent.qdocconf
index e45047cb51..d8ee963ef5 100644
--- a/src/concurrent/doc/qtconcurrent.qdocconf
+++ b/src/concurrent/doc/qtconcurrent.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtConcurrent
 description             = Qt Concurrent Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = qtconcurrent
diff --git a/src/concurrent/doc/snippets/code/src_concurrent_qtconcurrentrun.cpp b/src/concurrent/doc/snippets/code/src_concurrent_qtconcurrentrun.cpp
index 8922e41f34..ab7c67d4fb 100644
--- a/src/concurrent/doc/snippets/code/src_concurrent_qtconcurrentrun.cpp
+++ b/src/concurrent/doc/snippets/code/src_concurrent_qtconcurrentrun.cpp
@@ -44,6 +44,13 @@ QFuture<void> future = QtConcurrent::run(aFunction);
 //! [0]
 
 
+//! [explicit-pool-0]
+extern void aFunction();
+QThreadPool pool;
+QFuture<void> future = QtConcurrent::run(&pool, aFunction);
+//! [explicit-pool-0]
+
+
 //! [1]
 extern void aFunctionWithArguments(int arg1, double arg2, const QString &string);
 
diff --git a/src/concurrent/qtconcurrent_global.h b/src/concurrent/qtconcurrent_global.h
index 965d33f3d9..5f09a1b24a 100644
--- a/src/concurrent/qtconcurrent_global.h
+++ b/src/concurrent/qtconcurrent_global.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentcompilertest.h b/src/concurrent/qtconcurrentcompilertest.h
index 7652a6946f..0040dcbed4 100644
--- a/src/concurrent/qtconcurrentcompilertest.h
+++ b/src/concurrent/qtconcurrentcompilertest.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentexception.h b/src/concurrent/qtconcurrentexception.h
index 21fdb25c2d..8ca0a47735 100644
--- a/src/concurrent/qtconcurrentexception.h
+++ b/src/concurrent/qtconcurrentexception.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentfilter.cpp b/src/concurrent/qtconcurrentfilter.cpp
index ab0227983d..8dddf5a1b8 100644
--- a/src/concurrent/qtconcurrentfilter.cpp
+++ b/src/concurrent/qtconcurrentfilter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentfilter.h b/src/concurrent/qtconcurrentfilter.h
index 4c6f2ed896..0f114c37c9 100644
--- a/src/concurrent/qtconcurrentfilter.h
+++ b/src/concurrent/qtconcurrentfilter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentfilterkernel.h b/src/concurrent/qtconcurrentfilterkernel.h
index 29bb3c942a..af6b240607 100644
--- a/src/concurrent/qtconcurrentfilterkernel.h
+++ b/src/concurrent/qtconcurrentfilterkernel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentfunctionwrappers.h b/src/concurrent/qtconcurrentfunctionwrappers.h
index abd316b7fa..deb912714c 100644
--- a/src/concurrent/qtconcurrentfunctionwrappers.h
+++ b/src/concurrent/qtconcurrentfunctionwrappers.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentiteratekernel.cpp b/src/concurrent/qtconcurrentiteratekernel.cpp
index 268d85cb01..58028dbc8d 100644
--- a/src/concurrent/qtconcurrentiteratekernel.cpp
+++ b/src/concurrent/qtconcurrentiteratekernel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentiteratekernel.h b/src/concurrent/qtconcurrentiteratekernel.h
index 0969029e37..d55e1fceed 100644
--- a/src/concurrent/qtconcurrentiteratekernel.h
+++ b/src/concurrent/qtconcurrentiteratekernel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentmap.cpp b/src/concurrent/qtconcurrentmap.cpp
index fc904a4d59..b60701e742 100644
--- a/src/concurrent/qtconcurrentmap.cpp
+++ b/src/concurrent/qtconcurrentmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentmap.h b/src/concurrent/qtconcurrentmap.h
index bc1c3638d9..34ccfd980d 100644
--- a/src/concurrent/qtconcurrentmap.h
+++ b/src/concurrent/qtconcurrentmap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentmapkernel.h b/src/concurrent/qtconcurrentmapkernel.h
index 36e9cd3527..f04ca32527 100644
--- a/src/concurrent/qtconcurrentmapkernel.h
+++ b/src/concurrent/qtconcurrentmapkernel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentmedian.h b/src/concurrent/qtconcurrentmedian.h
index 5dd43a015e..19726348d8 100644
--- a/src/concurrent/qtconcurrentmedian.h
+++ b/src/concurrent/qtconcurrentmedian.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentreducekernel.h b/src/concurrent/qtconcurrentreducekernel.h
index dcf4b92319..34de8d49cb 100644
--- a/src/concurrent/qtconcurrentreducekernel.h
+++ b/src/concurrent/qtconcurrentreducekernel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentrun.cpp b/src/concurrent/qtconcurrentrun.cpp
index c71fc9048f..0aeb640e1e 100644
--- a/src/concurrent/qtconcurrentrun.cpp
+++ b/src/concurrent/qtconcurrentrun.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,6 +51,11 @@
     QThreadPool. You can use the QFuture and QFutureWatcher classes to monitor
     the status of the function.
 
+    To use a dedicated thread pool, you can pass the QThreadPool as
+    the first argument:
+
+    \snippet code/src_concurrent_qtconcurrentrun.cpp explicit-pool-0
+
     \section1 Passing Arguments to the Function
 
     Passing arguments to the function is done by adding them to the
@@ -130,9 +127,31 @@
 /*!
     \fn QFuture<T> QtConcurrent::run(Function function, ...);
 
+    Equivalent to
+    \code
+    QtConcurrent::run(QThreadPool::globalInstance(), function, ...);
+    \endcode
+
     Runs \a function in a separate thread. The thread is taken from the global
-    QThreadPool. Note that the function may not run immediately; the function
-    will only be run when a thread is available.
+    QThreadPool. Note that \a function may not run immediately; \a function
+    will only be run once a thread becomes available.
+
+    T is the same type as the return value of \a function. Non-void return
+    values can be accessed via the QFuture::result() function.
+
+    Note that the QFuture returned by QtConcurrent::run() does not support
+    canceling, pausing, or progress reporting. The QFuture returned can only
+    be used to query for the running/finished status and the return value of
+    the function.
+*/
+
+/*!
+    \since 5.4
+    \fn QFuture<T> QtConcurrent::run(QThreadPool *pool, Function function, ...);
+
+    Runs \a function in a separate thread. The thread is taken from the
+    QThreadPool \a pool. Note that \a function may not run immediately; \a function
+    will only be run once a thread becomes available.
 
     T is the same type as the return value of \a function. Non-void return
     values can be accessed via the QFuture::result() function.
diff --git a/src/concurrent/qtconcurrentrun.h b/src/concurrent/qtconcurrentrun.h
index 0bfe4bfd0a..9df70d11a9 100644
--- a/src/concurrent/qtconcurrentrun.h
+++ b/src/concurrent/qtconcurrentrun.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,6 +52,9 @@ namespace QtConcurrent {
     template <typename T>
     QFuture<T> run(Function function, ...);
 
+    template <typename T>
+    QFuture<T> run(QThreadPool *pool, Function function, ...);
+
 } // namespace QtConcurrent
 
 #else
@@ -334,6 +329,277 @@ QFuture<T> run(const Class *object, T (Class::*fn)(Param1, Param2, Param3, Param
     return (new typename SelectStoredConstMemberFunctionPointerCall5<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4, Param5, Arg5>::type(fn, object, arg1, arg2, arg3, arg4, arg5))->start();
 }
 
+// ...and the same with a QThreadPool *pool argument...
+// generate from the above by c'n'p and s/run(/run(QThreadPool *pool, / and s/start()/start(pool)/
+
+template <typename T>
+QFuture<T> run(QThreadPool *pool, T (*functionPointer)())
+{
+    return (new StoredFunctorCall0<T, T (*)()>(functionPointer))->start(pool);
+}
+template <typename T, typename Param1, typename Arg1>
+QFuture<T> run(QThreadPool *pool, T (*functionPointer)(Param1), const Arg1 &arg1)
+{
+    return (new StoredFunctorCall1<T, T (*)(Param1), Arg1>(functionPointer, arg1))->start(pool);
+}
+template <typename T, typename Param1, typename Arg1, typename Param2, typename Arg2>
+QFuture<T> run(QThreadPool *pool, T (*functionPointer)(Param1, Param2), const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new StoredFunctorCall2<T, T (*)(Param1, Param2), Arg1, Arg2>(functionPointer, arg1, arg2))->start(pool);
+}
+template <typename T, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3>
+QFuture<T> run(QThreadPool *pool, T (*functionPointer)(Param1, Param2, Param3), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new StoredFunctorCall3<T, T (*)(Param1, Param2, Param3), Arg1, Arg2, Arg3>(functionPointer, arg1, arg2, arg3))->start(pool);
+}
+template <typename T, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4>
+QFuture<T> run(QThreadPool *pool, T (*functionPointer)(Param1, Param2, Param3, Param4), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new StoredFunctorCall4<T, T (*)(Param1, Param2, Param3, Param4), Arg1, Arg2, Arg3, Arg4>(functionPointer, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename T, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4, typename Param5, typename Arg5>
+QFuture<T> run(QThreadPool *pool, T (*functionPointer)(Param1, Param2, Param3, Param4, Param5), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new StoredFunctorCall5<T, T (*)(Param1, Param2, Param3, Param4, Param5), Arg1, Arg2, Arg3, Arg4, Arg5>(functionPointer, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+#if defined(Q_COMPILER_DECLTYPE) && defined(Q_COMPILER_AUTO_FUNCTION)
+
+template <typename Functor>
+auto run(QThreadPool *pool, Functor functor) -> typename QtPrivate::QEnableIf<!QtPrivate::HasResultType<Functor>::Value, QFuture<decltype(functor())> >::Type
+{
+    typedef decltype(functor()) result_type;
+    return (new StoredFunctorCall0<result_type, Functor>(functor))->start(pool);
+}
+
+template <typename Functor, typename Arg1>
+auto run(QThreadPool *pool, Functor functor, const Arg1 &arg1)
+    -> typename QtPrivate::QEnableIf<!QtPrivate::HasResultType<Functor>::Value, QFuture<decltype(functor(arg1))> >::Type
+{
+    typedef decltype(functor(arg1)) result_type;
+    return (new StoredFunctorCall1<result_type, Functor, Arg1>(functor, arg1))->start(pool);
+}
+
+template <typename Functor, typename Arg1, typename Arg2>
+auto run(QThreadPool *pool, Functor functor, const Arg1 &arg1, const Arg2 &arg2)
+    -> typename QtPrivate::QEnableIf<!QtPrivate::HasResultType<Functor>::Value, QFuture<decltype(functor(arg1, arg2))> >::Type
+{
+    typedef decltype(functor(arg1, arg2)) result_type;
+    return (new StoredFunctorCall2<result_type, Functor, Arg1, Arg2>(functor, arg1, arg2))->start(pool);
+}
+
+template <typename Functor, typename Arg1, typename Arg2, typename Arg3>
+auto run(QThreadPool *pool, Functor functor, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+    -> typename QtPrivate::QEnableIf<!QtPrivate::HasResultType<Functor>::Value, QFuture<decltype(functor(arg1, arg2, arg3))> >::Type
+{
+    typedef decltype(functor(arg1, arg2, arg3)) result_type;
+    return (new StoredFunctorCall3<result_type, Functor, Arg1, Arg2, Arg3>(functor, arg1, arg2, arg3))->start(pool);
+}
+
+template <typename Functor, typename Arg1, typename Arg2, typename Arg3, typename Arg4>
+auto run(QThreadPool *pool, Functor functor, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+    -> typename QtPrivate::QEnableIf<!QtPrivate::HasResultType<Functor>::Value, QFuture<decltype(functor(arg1, arg2, arg3, arg4))> >::Type
+{
+    typedef decltype(functor(arg1, arg2, arg3, arg4)) result_type;
+    return (new StoredFunctorCall4<result_type, Functor, Arg1, Arg2, Arg3, Arg4>(functor, arg1, arg2, arg3, arg4))->start(pool);
+}
+
+template <typename Functor, typename Arg1, typename Arg2, typename Arg3, typename Arg4, typename Arg5>
+auto run(QThreadPool *pool, Functor functor, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+    -> typename QtPrivate::QEnableIf<!QtPrivate::HasResultType<Functor>::Value, QFuture<decltype(functor(arg1, arg2, arg3, arg4, arg5))> >::Type
+{
+    typedef decltype(functor(arg1, arg2, arg3, arg4, arg5)) result_type;
+    return (new StoredFunctorCall5<result_type, Functor, Arg1, Arg2, Arg3, Arg4, Arg5>(functor, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+#endif
+
+template <typename FunctionObject>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject functionObject)
+{
+    return (new StoredFunctorCall0<typename FunctionObject::result_type, FunctionObject>(functionObject))->start(pool);
+}
+template <typename FunctionObject, typename Arg1>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject functionObject, const Arg1 &arg1)
+{
+    return (new StoredFunctorCall1<typename FunctionObject::result_type, FunctionObject, Arg1>(functionObject, arg1))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject functionObject, const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new StoredFunctorCall2<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2>(functionObject, arg1, arg2))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2, typename Arg3>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject functionObject, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new StoredFunctorCall3<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2, Arg3>(functionObject, arg1, arg2, arg3))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2, typename Arg3, typename Arg4>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject functionObject, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new StoredFunctorCall4<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2, Arg3, Arg4>(functionObject, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2, typename Arg3, typename Arg4, typename Arg5>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject functionObject, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new StoredFunctorCall5<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2, Arg3, Arg4, Arg5>(functionObject, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+template <typename FunctionObject>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject *functionObject)
+{
+    return (new typename SelectStoredFunctorPointerCall0<typename FunctionObject::result_type, FunctionObject>::type(functionObject))->start(pool);
+}
+template <typename FunctionObject, typename Arg1>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject *functionObject, const Arg1 &arg1)
+{
+    return (new typename SelectStoredFunctorPointerCall1<typename FunctionObject::result_type, FunctionObject, Arg1>::type(functionObject, arg1))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject *functionObject, const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new typename SelectStoredFunctorPointerCall2<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2>::type(functionObject, arg1, arg2))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2, typename Arg3>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject *functionObject, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new typename SelectStoredFunctorPointerCall3<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2, Arg3>::type(functionObject, arg1, arg2, arg3))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2, typename Arg3, typename Arg4>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject *functionObject, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new typename SelectStoredFunctorPointerCall4<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2, Arg3, Arg4>::type(functionObject, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename FunctionObject, typename Arg1, typename Arg2, typename Arg3, typename Arg4, typename Arg5>
+QFuture<typename FunctionObject::result_type> run(QThreadPool *pool, FunctionObject *functionObject, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new typename SelectStoredFunctorPointerCall5<typename FunctionObject::result_type, FunctionObject, Arg1, Arg2, Arg3, Arg4, Arg5>::type(functionObject, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+template <typename T, typename Class>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)())
+{
+    return (new typename SelectStoredMemberFunctionCall0<T, Class>::type(fn, object))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1), const Arg1 &arg1)
+{
+    return (new typename SelectStoredMemberFunctionCall1<T, Class, Param1, Arg1>::type(fn, object, arg1))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2), const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new typename SelectStoredMemberFunctionCall2<T, Class, Param1, Arg1, Param2, Arg2>::type(fn, object, arg1, arg2))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2, Param3), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new typename SelectStoredMemberFunctionCall3<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3>::type(fn, object, arg1, arg2, arg3))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2, Param3, Param4), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new typename SelectStoredMemberFunctionCall4<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4>::type(fn, object, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4, typename Param5, typename Arg5>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2, Param3, Param4, Param5), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new typename SelectStoredMemberFunctionCall5<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4, Param5, Arg5>::type(fn, object, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+template <typename T, typename Class>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)() const)
+{
+    return (new typename SelectStoredConstMemberFunctionCall0<T, Class>::type(fn, object))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1) const, const Arg1 &arg1)
+{
+    return (new typename SelectStoredConstMemberFunctionCall1<T, Class, Param1, Arg1>::type(fn, object, arg1))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2) const, const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new typename SelectStoredConstMemberFunctionCall2<T, Class, Param1, Arg1, Param2, Arg2>::type(fn, object, arg1, arg2))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2, Param3) const, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new typename SelectStoredConstMemberFunctionCall3<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3>::type(fn, object, arg1, arg2, arg3))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2, Param3, Param4) const, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new typename SelectStoredConstMemberFunctionCall4<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4>::type(fn, object, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4, typename Param5, typename Arg5>
+QFuture<T> run(QThreadPool *pool, const Class &object, T (Class::*fn)(Param1, Param2, Param3, Param4, Param5) const, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new typename SelectStoredConstMemberFunctionCall5<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4, Param5, Arg5>::type(fn, object, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+template <typename T, typename Class>
+QFuture<T> run(QThreadPool *pool, Class *object, T (Class::*fn)())
+{
+    return (new typename SelectStoredMemberFunctionPointerCall0<T, Class>::type(fn, object))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1>
+QFuture<T> run(QThreadPool *pool, Class *object, T (Class::*fn)(Param1), const Arg1 &arg1)
+{
+    return (new typename SelectStoredMemberFunctionPointerCall1<T, Class, Param1, Arg1>::type(fn, object, arg1))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2>
+QFuture<T> run(QThreadPool *pool, Class *object, T (Class::*fn)(Param1, Param2), const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new typename SelectStoredMemberFunctionPointerCall2<T, Class, Param1, Arg1, Param2, Arg2>::type(fn, object, arg1, arg2))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3>
+QFuture<T> run(QThreadPool *pool, Class *object, T (Class::*fn)(Param1, Param2, Param3), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new typename SelectStoredMemberFunctionPointerCall3<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3>::type(fn, object, arg1, arg2, arg3))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4>
+QFuture<T> run(QThreadPool *pool, Class *object, T (Class::*fn)(Param1, Param2, Param3, Param4), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new typename SelectStoredMemberFunctionPointerCall4<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4>::type(fn, object, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4, typename Param5, typename Arg5>
+QFuture<T> run(QThreadPool *pool, Class *object, T (Class::*fn)(Param1, Param2, Param3, Param4, Param5), const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new typename SelectStoredMemberFunctionPointerCall5<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4, Param5, Arg5>::type(fn, object, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
+template <typename T, typename Class>
+QFuture<T> run(QThreadPool *pool, const Class *object, T (Class::*fn)() const)
+{
+    return (new typename SelectStoredConstMemberFunctionPointerCall0<T, Class>::type(fn, object))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1>
+QFuture<T> run(QThreadPool *pool, const Class *object, T (Class::*fn)(Param1) const, const Arg1 &arg1)
+{
+    return (new typename SelectStoredConstMemberFunctionPointerCall1<T, Class, Param1, Arg1>::type(fn, object, arg1))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2>
+QFuture<T> run(QThreadPool *pool, const Class *object, T (Class::*fn)(Param1, Param2) const, const Arg1 &arg1, const Arg2 &arg2)
+{
+    return (new typename SelectStoredConstMemberFunctionPointerCall2<T, Class, Param1, Arg1, Param2, Arg2>::type(fn, object, arg1, arg2))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3>
+QFuture<T> run(QThreadPool *pool, const Class *object, T (Class::*fn)(Param1, Param2, Param3) const, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3)
+{
+    return (new typename SelectStoredConstMemberFunctionPointerCall3<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3>::type(fn, object, arg1, arg2, arg3))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4>
+QFuture<T> run(QThreadPool *pool, const Class *object, T (Class::*fn)(Param1, Param2, Param3, Param4) const, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4)
+{
+    return (new typename SelectStoredConstMemberFunctionPointerCall4<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4>::type(fn, object, arg1, arg2, arg3, arg4))->start(pool);
+}
+template <typename T, typename Class, typename Param1, typename Arg1, typename Param2, typename Arg2, typename Param3, typename Arg3, typename Param4, typename Arg4, typename Param5, typename Arg5>
+QFuture<T> run(QThreadPool *pool, const Class *object, T (Class::*fn)(Param1, Param2, Param3, Param4, Param5) const, const Arg1 &arg1, const Arg2 &arg2, const Arg3 &arg3, const Arg4 &arg4, const Arg5 &arg5)
+{
+    return (new typename SelectStoredConstMemberFunctionPointerCall5<T, Class, Param1, Arg1, Param2, Arg2, Param3, Arg3, Param4, Arg4, Param5, Arg5>::type(fn, object, arg1, arg2, arg3, arg4, arg5))->start(pool);
+}
+
 } //namespace QtConcurrent
 
 #endif // Q_QDOC
diff --git a/src/concurrent/qtconcurrentrunbase.h b/src/concurrent/qtconcurrentrunbase.h
index bd24c42ce2..95ffdcf441 100644
--- a/src/concurrent/qtconcurrentrunbase.h
+++ b/src/concurrent/qtconcurrentrunbase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,10 +69,16 @@ class RunFunctionTaskBase : public QFutureInterface<T> , public QRunnable
 public:
     QFuture<T> start()
     {
+        return start(QThreadPool::globalInstance());
+    }
+
+    QFuture<T> start(QThreadPool *pool)
+    {
+        this->setThreadPool(pool);
         this->setRunnable(this);
         this->reportStarted();
         QFuture<T> theFuture = this->future();
-        QThreadPool::globalInstance()->start(this, /*m_priority*/ 0);
+        pool->start(this, /*m_priority*/ 0);
         return theFuture;
     }
 
diff --git a/src/concurrent/qtconcurrentstoredfunctioncall.h b/src/concurrent/qtconcurrentstoredfunctioncall.h
index 8d49ab3dfc..5821dc7bb8 100644
--- a/src/concurrent/qtconcurrentstoredfunctioncall.h
+++ b/src/concurrent/qtconcurrentstoredfunctioncall.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentthreadengine.cpp b/src/concurrent/qtconcurrentthreadengine.cpp
index bc25b3fb1b..93f5bd6b9d 100644
--- a/src/concurrent/qtconcurrentthreadengine.cpp
+++ b/src/concurrent/qtconcurrentthreadengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/concurrent/qtconcurrentthreadengine.h b/src/concurrent/qtconcurrentthreadengine.h
index a3ee8ca202..b521572f40 100644
--- a/src/concurrent/qtconcurrentthreadengine.h
+++ b/src/concurrent/qtconcurrentthreadengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qabstractanimation.cpp b/src/corelib/animation/qabstractanimation.cpp
index 95d7713cfe..a65e1c9ef4 100644
--- a/src/corelib/animation/qabstractanimation.cpp
+++ b/src/corelib/animation/qabstractanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -222,7 +214,8 @@ QUnifiedTimer::QUnifiedTimer() :
     QObject(), defaultDriver(this), lastTick(0), timingInterval(DEFAULT_TIMER_INTERVAL),
     currentAnimationIdx(0), insideTick(false), insideRestart(false), consistentTiming(false), slowMode(false),
     startTimersPending(false), stopTimerPending(false),
-    slowdownFactor(5.0f), profilerCallback(0)
+    slowdownFactor(5.0f), profilerCallback(0),
+    driverStartTime(0), temporalDrift(0)
 {
     time.invalidate();
     driver = &defaultDriver;
@@ -253,18 +246,56 @@ QUnifiedTimer *QUnifiedTimer::instance()
 
 void QUnifiedTimer::maybeUpdateAnimationsToCurrentTime()
 {
-    qint64 elapsed = driver->elapsed();
-    if (elapsed - lastTick > 50)
-        updateAnimationTimers(elapsed);
+    if (elapsed() - lastTick > 50)
+        updateAnimationTimers(-1);
 }
 
-void QUnifiedTimer::updateAnimationTimers(qint64 currentTick)
+qint64 QUnifiedTimer::elapsed() const
+{
+    if (driver->isRunning())
+        return driverStartTime + driver->elapsed();
+    else if (time.isValid())
+        return time.elapsed() + temporalDrift;
+
+    // Reaching here would normally indicate that the function is called
+    // under the wrong circumstances as neither pauses nor actual animations
+    // are running and there should be no need to query for elapsed().
+    return 0;
+}
+
+void QUnifiedTimer::startAnimationDriver()
+{
+    if (driver->isRunning()) {
+        qWarning("QUnifiedTimer::startAnimationDriver: driver is already running...");
+        return;
+    }
+    // Set the start time to the currently elapsed() value before starting.
+    // This means we get the animation system time including the temporal drift
+    // which is what we want.
+    driverStartTime = elapsed();
+    driver->start();
+}
+
+void QUnifiedTimer::stopAnimationDriver()
+{
+    if (!driver->isRunning()) {
+        qWarning("QUnifiedTimer::stopAnimationDriver: driver is not running");
+        return;
+    }
+    // Update temporal drift. Since the driver is running, elapsed() will
+    // return the total animation time in driver-time. Subtract the current
+    // wall time to get the delta.
+    temporalDrift = elapsed() - time.elapsed();
+    driver->stop();
+}
+
+void QUnifiedTimer::updateAnimationTimers(qint64)
 {
     //setCurrentTime can get this called again while we're the for loop. At least with pauseAnimations
     if(insideTick)
         return;
 
-    qint64 totalElapsed = currentTick >= 0 ? currentTick : driver->elapsed();
+    qint64 totalElapsed = elapsed();
 
     // ignore consistentTiming in case the pause timer is active
     qint64 delta = (consistentTiming && !pauseTimer.isActive()) ?
@@ -323,8 +354,7 @@ void QUnifiedTimer::localRestart()
     } else if (!driver->isRunning()) {
         if (pauseTimer.isActive())
             pauseTimer.stop();
-        driver->setStartTime(time.isValid() ? time.elapsed() : 0);
-        driver->start();
+        startAnimationDriver();
     }
 
 }
@@ -345,27 +375,26 @@ void QUnifiedTimer::setTimingInterval(int interval)
 
     if (driver->isRunning() && !pauseTimer.isActive()) {
         //we changed the timing interval
-        driver->stop();
-        driver->setStartTime(time.isValid() ? time.elapsed() : 0);
-        driver->start();
+        stopAnimationDriver();
+        startAnimationDriver();
     }
 }
 
 void QUnifiedTimer::startTimers()
 {
     startTimersPending = false;
-    if (!animationTimers.isEmpty())
-        updateAnimationTimers(-1);
 
     //we transfer the waiting animations into the "really running" state
     animationTimers += animationTimersToStart;
     animationTimersToStart.clear();
     if (!animationTimers.isEmpty()) {
-        localRestart();
         if (!time.isValid()) {
             lastTick = 0;
             time.start();
+            temporalDrift = 0;
+            driverStartTime = 0;
         }
+        localRestart();
     }
 }
 
@@ -373,7 +402,7 @@ void QUnifiedTimer::stopTimer()
 {
     stopTimerPending = false;
     if (animationTimers.isEmpty()) {
-        driver->stop();
+        stopAnimationDriver();
         pauseTimer.stop();
         // invalidate the start reference time
         time.invalidate();
@@ -483,14 +512,12 @@ void QUnifiedTimer::installAnimationDriver(QAnimationDriver *d)
         return;
     }
 
-    if (driver->isRunning()) {
-        driver->stop();
-        d->setStartTime(time.isValid() ? time.elapsed() : 0);
-        d->start();
-    }
-
+    bool running = driver->isRunning();
+    if (running)
+        stopAnimationDriver();
     driver = d;
-
+    if (running)
+        startAnimationDriver();
 }
 
 void QUnifiedTimer::uninstallAnimationDriver(QAnimationDriver *d)
@@ -500,13 +527,12 @@ void QUnifiedTimer::uninstallAnimationDriver(QAnimationDriver *d)
         return;
     }
 
+    bool running = driver->isRunning();
+    if (running)
+        stopAnimationDriver();
     driver = &defaultDriver;
-
-    if (d->isRunning()) {
-        d->stop();
-        driver->setStartTime(time.isValid() ? time.elapsed() : 0);
-        driver->start();
-    }
+    if (running)
+        startAnimationDriver();
 }
 
 /*!
@@ -603,10 +629,12 @@ void QAnimationTimer::restartAnimationTimer()
 
 void QAnimationTimer::startAnimations()
 {
+    if (!startAnimationPending)
+        return;
     startAnimationPending = false;
+
     //force timer to update, which prevents large deltas for our newly added animations
-    if (!animations.isEmpty())
-        QUnifiedTimer::instance()->maybeUpdateAnimationsToCurrentTime();
+    QUnifiedTimer::instance()->maybeUpdateAnimationsToCurrentTime();
 
     //we transfer the waiting animations into the "really running" state
     animations += animationsToStart;
@@ -618,7 +646,8 @@ void QAnimationTimer::startAnimations()
 void QAnimationTimer::stopTimer()
 {
     stopTimerPending = false;
-    if (animations.isEmpty()) {
+    bool pendingStart = startAnimationPending && animationsToStart.size() > 0;
+    if (animations.isEmpty() && !pendingStart) {
         QUnifiedTimer::resumeAnimationTimer(this);
         QUnifiedTimer::stopAnimationTimer(this);
         // invalidate the start reference time
@@ -749,20 +778,25 @@ QAnimationDriver::~QAnimationDriver()
     This is to take into account that pauses can occur in running
     animations which will stop the driver, but the time still
     increases.
+
+    \obsolete
+
+    This logic is now handled internally in the animation system.
  */
-void QAnimationDriver::setStartTime(qint64 startTime)
+void QAnimationDriver::setStartTime(qint64)
 {
-    Q_D(QAnimationDriver);
-    d->startTime = startTime;
 }
 
 /*!
     Returns the start time of the animation.
+
+    \obsolete
+
+    This logic is now handled internally in the animation system.
  */
 qint64 QAnimationDriver::startTime() const
 {
-    Q_D(const QAnimationDriver);
-    return d->startTime;
+    return 0;
 }
 
 
@@ -772,6 +806,10 @@ qint64 QAnimationDriver::startTime() const
 
     If \a timeStep is positive, it will be used as the current time in the
     calculations; otherwise, the current clock time will be used.
+
+    Since 5.4, the timeStep argument is ignored and elapsed() will be
+    used instead in combination with the internal time offsets of the
+    animation system.
  */
 
 void QAnimationDriver::advanceAnimation(qint64 timeStep)
@@ -831,6 +869,7 @@ void QAnimationDriver::start()
     Q_D(QAnimationDriver);
     if (!d->running) {
         d->running = true;
+        d->timer.start();
         emit started();
     }
 }
@@ -854,9 +893,8 @@ void QAnimationDriver::stop()
 
 qint64 QAnimationDriver::elapsed() const
 {
-    // The default implementation picks up the elapsed time from the
-    // unified timer and can ignore the time offset.
-    return QUnifiedTimer::instance()->time.elapsed();
+    Q_D(const QAnimationDriver);
+    return d->running ? d->timer.elapsed() : 0;
 }
 
 /*!
diff --git a/src/corelib/animation/qabstractanimation.h b/src/corelib/animation/qabstractanimation.h
index f1aa6c0d78..2c325e7c02 100644
--- a/src/corelib/animation/qabstractanimation.h
+++ b/src/corelib/animation/qabstractanimation.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -149,6 +141,7 @@ public:
 
     virtual qint64 elapsed() const;
 
+    // ### Qt6: Remove these two functions
     void setStartTime(qint64 startTime);
     qint64 startTime() const;
 
@@ -157,6 +150,7 @@ Q_SIGNALS:
     void stopped();
 
 protected:
+    // ### Qt6: Remove timestep argument
     void advanceAnimation(qint64 timeStep = -1);
     virtual void start();
     virtual void stop();
diff --git a/src/corelib/animation/qabstractanimation_p.h b/src/corelib/animation/qabstractanimation_p.h
index 39d9cf0fe6..827d6aeb54 100644
--- a/src/corelib/animation/qabstractanimation_p.h
+++ b/src/corelib/animation/qabstractanimation_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -132,9 +124,9 @@ private:
 class Q_CORE_EXPORT QAnimationDriverPrivate : public QObjectPrivate
 {
 public:
-    QAnimationDriverPrivate() : running(false), startTime(0) {}
+    QAnimationDriverPrivate() : running(false) {}
+    QElapsedTimer timer;
     bool running;
-    qint64 startTime;
 };
 
 class Q_CORE_EXPORT QAbstractAnimationTimer : public QObject
@@ -193,6 +185,10 @@ public:
     int runningAnimationCount();
     void registerProfilerCallback(void (*cb)(qint64));
 
+    void startAnimationDriver();
+    void stopAnimationDriver();
+    qint64 elapsed() const;
+
 protected:
     void timerEvent(QTimerEvent *);
 
@@ -233,6 +229,9 @@ private:
     int closestPausedAnimationTimerTimeToFinish();
 
     void (*profilerCallback)(qint64);
+
+    qint64 driverStartTime; // The time the animation driver was started
+    qint64 temporalDrift; // The delta between animation driver time and wall time.
 };
 
 class QAnimationTimer : public QAbstractAnimationTimer
diff --git a/src/corelib/animation/qanimationgroup.cpp b/src/corelib/animation/qanimationgroup.cpp
index 23eab52818..0f87d7263e 100644
--- a/src/corelib/animation/qanimationgroup.cpp
+++ b/src/corelib/animation/qanimationgroup.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qanimationgroup.h b/src/corelib/animation/qanimationgroup.h
index cf32f844d3..5a027e75ca 100644
--- a/src/corelib/animation/qanimationgroup.h
+++ b/src/corelib/animation/qanimationgroup.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qanimationgroup_p.h b/src/corelib/animation/qanimationgroup_p.h
index 6572f412a9..d19e60c7a8 100644
--- a/src/corelib/animation/qanimationgroup_p.h
+++ b/src/corelib/animation/qanimationgroup_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qparallelanimationgroup.cpp b/src/corelib/animation/qparallelanimationgroup.cpp
index 1852a5c569..06e187ab01 100644
--- a/src/corelib/animation/qparallelanimationgroup.cpp
+++ b/src/corelib/animation/qparallelanimationgroup.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qparallelanimationgroup.h b/src/corelib/animation/qparallelanimationgroup.h
index 31810cfca2..7183823987 100644
--- a/src/corelib/animation/qparallelanimationgroup.h
+++ b/src/corelib/animation/qparallelanimationgroup.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qparallelanimationgroup_p.h b/src/corelib/animation/qparallelanimationgroup_p.h
index 1070baaeac..cfaa851b06 100644
--- a/src/corelib/animation/qparallelanimationgroup_p.h
+++ b/src/corelib/animation/qparallelanimationgroup_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qpauseanimation.cpp b/src/corelib/animation/qpauseanimation.cpp
index 650b895dbd..054b7f2195 100644
--- a/src/corelib/animation/qpauseanimation.cpp
+++ b/src/corelib/animation/qpauseanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qpauseanimation.h b/src/corelib/animation/qpauseanimation.h
index 5c770015ef..2d53e6da52 100644
--- a/src/corelib/animation/qpauseanimation.h
+++ b/src/corelib/animation/qpauseanimation.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qpropertyanimation.cpp b/src/corelib/animation/qpropertyanimation.cpp
index 8b4685948e..115b6bbdad 100644
--- a/src/corelib/animation/qpropertyanimation.cpp
+++ b/src/corelib/animation/qpropertyanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qpropertyanimation.h b/src/corelib/animation/qpropertyanimation.h
index f6b92cb515..437438dd57 100644
--- a/src/corelib/animation/qpropertyanimation.h
+++ b/src/corelib/animation/qpropertyanimation.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qpropertyanimation_p.h b/src/corelib/animation/qpropertyanimation_p.h
index 9b4b799cb0..682439a288 100644
--- a/src/corelib/animation/qpropertyanimation_p.h
+++ b/src/corelib/animation/qpropertyanimation_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qsequentialanimationgroup.cpp b/src/corelib/animation/qsequentialanimationgroup.cpp
index 1c84e3dbc9..5e801abab4 100644
--- a/src/corelib/animation/qsequentialanimationgroup.cpp
+++ b/src/corelib/animation/qsequentialanimationgroup.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qsequentialanimationgroup.h b/src/corelib/animation/qsequentialanimationgroup.h
index 51b4227599..9346d12e26 100644
--- a/src/corelib/animation/qsequentialanimationgroup.h
+++ b/src/corelib/animation/qsequentialanimationgroup.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qsequentialanimationgroup_p.h b/src/corelib/animation/qsequentialanimationgroup_p.h
index 3b7cd9895a..caa32faaf8 100644
--- a/src/corelib/animation/qsequentialanimationgroup_p.h
+++ b/src/corelib/animation/qsequentialanimationgroup_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qvariantanimation.cpp b/src/corelib/animation/qvariantanimation.cpp
index a23a6a7cda..dcbf55f28b 100644
--- a/src/corelib/animation/qvariantanimation.cpp
+++ b/src/corelib/animation/qvariantanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -206,11 +198,11 @@ void QVariantAnimationPrivate::convertValues(int t)
     //this ensures that all the keyValues are of type t
     for (int i = 0; i < keyValues.count(); ++i) {
         QVariantAnimation::KeyValue &pair = keyValues[i];
-        pair.second.convert(static_cast<QVariant::Type>(t));
+        pair.second.convert(t);
     }
     //we also need update to the current interval if needed
-    currentInterval.start.second.convert(static_cast<QVariant::Type>(t));
-    currentInterval.end.second.convert(static_cast<QVariant::Type>(t));
+    currentInterval.start.second.convert(t);
+    currentInterval.end.second.convert(t);
 
     //... and the interpolator
     updateInterpolator();
diff --git a/src/corelib/animation/qvariantanimation.h b/src/corelib/animation/qvariantanimation.h
index 83018c30ae..f2d8c0cfd3 100644
--- a/src/corelib/animation/qvariantanimation.h
+++ b/src/corelib/animation/qvariantanimation.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/animation/qvariantanimation_p.h b/src/corelib/animation/qvariantanimation_p.h
index 310656df78..a35109b343 100644
--- a/src/corelib/animation/qvariantanimation_p.h
+++ b/src/corelib/animation/qvariantanimation_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_armv5.h b/src/corelib/arch/qatomic_armv5.h
index 253b9263de..753960d20b 100644
--- a/src/corelib/arch/qatomic_armv5.h
+++ b/src/corelib/arch/qatomic_armv5.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_armv6.h b/src/corelib/arch/qatomic_armv6.h
index 3fd07e0813..d2cb2a4426 100644
--- a/src/corelib/arch/qatomic_armv6.h
+++ b/src/corelib/arch/qatomic_armv6.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_armv7.h b/src/corelib/arch/qatomic_armv7.h
index 1929ae0ab3..b4a6699fe8 100644
--- a/src/corelib/arch/qatomic_armv7.h
+++ b/src/corelib/arch/qatomic_armv7.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_bootstrap.h b/src/corelib/arch/qatomic_bootstrap.h
index 1ab901d826..6724a70df9 100644
--- a/src/corelib/arch/qatomic_bootstrap.h
+++ b/src/corelib/arch/qatomic_bootstrap.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_cxx11.h b/src/corelib/arch/qatomic_cxx11.h
index b07e470484..fd0263c829 100644
--- a/src/corelib/arch/qatomic_cxx11.h
+++ b/src/corelib/arch/qatomic_cxx11.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_gcc.h b/src/corelib/arch/qatomic_gcc.h
index 5184293465..3f96efcdb9 100644
--- a/src/corelib/arch/qatomic_gcc.h
+++ b/src/corelib/arch/qatomic_gcc.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_ia64.h b/src/corelib/arch/qatomic_ia64.h
index e5e93ec2b7..1fc8db1bab 100644
--- a/src/corelib/arch/qatomic_ia64.h
+++ b/src/corelib/arch/qatomic_ia64.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_mips.h b/src/corelib/arch/qatomic_mips.h
index 33e7053234..f6e6cf0aef 100644
--- a/src/corelib/arch/qatomic_mips.h
+++ b/src/corelib/arch/qatomic_mips.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_msvc.h b/src/corelib/arch/qatomic_msvc.h
index c660f78888..51c1814f89 100644
--- a/src/corelib/arch/qatomic_msvc.h
+++ b/src/corelib/arch/qatomic_msvc.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_unix.cpp b/src/corelib/arch/qatomic_unix.cpp
index 7a5c48c235..61fcbcc192 100644
--- a/src/corelib/arch/qatomic_unix.cpp
+++ b/src/corelib/arch/qatomic_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_unix.h b/src/corelib/arch/qatomic_unix.h
index 6ed9864073..866c1e38eb 100644
--- a/src/corelib/arch/qatomic_unix.h
+++ b/src/corelib/arch/qatomic_unix.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/qatomic_x86.h b/src/corelib/arch/qatomic_x86.h
index e3cb296527..383d0db7ee 100644
--- a/src/corelib/arch/qatomic_x86.h
+++ b/src/corelib/arch/qatomic_x86.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2011 Thiago Macieira <thiago@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/arch/sparc/qatomic_sparc.cpp b/src/corelib/arch/sparc/qatomic_sparc.cpp
index 8ea270e90a..0eba635a4d 100644
--- a/src/corelib/arch/sparc/qatomic_sparc.cpp
+++ b/src/corelib/arch/sparc/qatomic_sparc.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/cp949codetbl_p.h b/src/corelib/codecs/cp949codetbl_p.h
index 2a62b3c6c7..7d442a2024 100644
--- a/src/corelib/codecs/cp949codetbl_p.h
+++ b/src/corelib/codecs/cp949codetbl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qbig5codec.cpp b/src/corelib/codecs/qbig5codec.cpp
index 54cc0b930e..5deb267489 100644
--- a/src/corelib/codecs/qbig5codec.cpp
+++ b/src/corelib/codecs/qbig5codec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qbig5codec_p.h b/src/corelib/codecs/qbig5codec_p.h
index 5173239352..f8f77ad30e 100644
--- a/src/corelib/codecs/qbig5codec_p.h
+++ b/src/corelib/codecs/qbig5codec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qeucjpcodec.cpp b/src/corelib/codecs/qeucjpcodec.cpp
index 8ccb951ad5..d3cb67e3f3 100644
--- a/src/corelib/codecs/qeucjpcodec.cpp
+++ b/src/corelib/codecs/qeucjpcodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qeucjpcodec_p.h b/src/corelib/codecs/qeucjpcodec_p.h
index e8d86ac85f..26af43d48a 100644
--- a/src/corelib/codecs/qeucjpcodec_p.h
+++ b/src/corelib/codecs/qeucjpcodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qeuckrcodec.cpp b/src/corelib/codecs/qeuckrcodec.cpp
index 873b782378..6c807dba2a 100644
--- a/src/corelib/codecs/qeuckrcodec.cpp
+++ b/src/corelib/codecs/qeuckrcodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qeuckrcodec_p.h b/src/corelib/codecs/qeuckrcodec_p.h
index 44eb41d513..b269ef2540 100644
--- a/src/corelib/codecs/qeuckrcodec_p.h
+++ b/src/corelib/codecs/qeuckrcodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qgb18030codec.cpp b/src/corelib/codecs/qgb18030codec.cpp
index 9c161f7116..88152d445a 100644
--- a/src/corelib/codecs/qgb18030codec.cpp
+++ b/src/corelib/codecs/qgb18030codec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qgb18030codec_p.h b/src/corelib/codecs/qgb18030codec_p.h
index f4f94bc559..5767906ca3 100644
--- a/src/corelib/codecs/qgb18030codec_p.h
+++ b/src/corelib/codecs/qgb18030codec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qiconvcodec.cpp b/src/corelib/codecs/qiconvcodec.cpp
index 60b13ac4e1..563d3486b1 100644
--- a/src/corelib/codecs/qiconvcodec.cpp
+++ b/src/corelib/codecs/qiconvcodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qiconvcodec_p.h b/src/corelib/codecs/qiconvcodec_p.h
index be510c143c..053765eb4a 100644
--- a/src/corelib/codecs/qiconvcodec_p.h
+++ b/src/corelib/codecs/qiconvcodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qicucodec.cpp b/src/corelib/codecs/qicucodec.cpp
index 9afae8c0ee..103bf0573f 100644
--- a/src/corelib/codecs/qicucodec.cpp
+++ b/src/corelib/codecs/qicucodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qicucodec_p.h b/src/corelib/codecs/qicucodec_p.h
index 6fa83fb79e..9786b4398a 100644
--- a/src/corelib/codecs/qicucodec_p.h
+++ b/src/corelib/codecs/qicucodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qisciicodec.cpp b/src/corelib/codecs/qisciicodec.cpp
index 9520cca26c..e0c33aaa50 100644
--- a/src/corelib/codecs/qisciicodec.cpp
+++ b/src/corelib/codecs/qisciicodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qisciicodec_p.h b/src/corelib/codecs/qisciicodec_p.h
index eb5a354101..ce49975445 100644
--- a/src/corelib/codecs/qisciicodec_p.h
+++ b/src/corelib/codecs/qisciicodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qjiscodec.cpp b/src/corelib/codecs/qjiscodec.cpp
index 630f70423f..186f7560ca 100644
--- a/src/corelib/codecs/qjiscodec.cpp
+++ b/src/corelib/codecs/qjiscodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qjiscodec_p.h b/src/corelib/codecs/qjiscodec_p.h
index ff9aef2731..797f5e2a60 100644
--- a/src/corelib/codecs/qjiscodec_p.h
+++ b/src/corelib/codecs/qjiscodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qjpunicode.cpp b/src/corelib/codecs/qjpunicode.cpp
index 9513621dfe..6a8a13d8ac 100644
--- a/src/corelib/codecs/qjpunicode.cpp
+++ b/src/corelib/codecs/qjpunicode.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qjpunicode_p.h b/src/corelib/codecs/qjpunicode_p.h
index 223e481fc1..ebb60982f0 100644
--- a/src/corelib/codecs/qjpunicode_p.h
+++ b/src/corelib/codecs/qjpunicode_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qlatincodec.cpp b/src/corelib/codecs/qlatincodec.cpp
index 51015931f6..7a05f788a7 100644
--- a/src/corelib/codecs/qlatincodec.cpp
+++ b/src/corelib/codecs/qlatincodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qlatincodec_p.h b/src/corelib/codecs/qlatincodec_p.h
index 58c2362fe0..c4c9b11ef7 100644
--- a/src/corelib/codecs/qlatincodec_p.h
+++ b/src/corelib/codecs/qlatincodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qsimplecodec.cpp b/src/corelib/codecs/qsimplecodec.cpp
index fef6fd8873..aa8ba2802a 100644
--- a/src/corelib/codecs/qsimplecodec.cpp
+++ b/src/corelib/codecs/qsimplecodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qsimplecodec_p.h b/src/corelib/codecs/qsimplecodec_p.h
index abbdd715ad..fe499576fe 100644
--- a/src/corelib/codecs/qsimplecodec_p.h
+++ b/src/corelib/codecs/qsimplecodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qsjiscodec.cpp b/src/corelib/codecs/qsjiscodec.cpp
index 1dbb990847..158c032261 100644
--- a/src/corelib/codecs/qsjiscodec.cpp
+++ b/src/corelib/codecs/qsjiscodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qsjiscodec_p.h b/src/corelib/codecs/qsjiscodec_p.h
index 3d0763288c..3ab485f924 100644
--- a/src/corelib/codecs/qsjiscodec_p.h
+++ b/src/corelib/codecs/qsjiscodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qtextcodec.cpp b/src/corelib/codecs/qtextcodec.cpp
index 7e3e629c47..519570c499 100644
--- a/src/corelib/codecs/qtextcodec.cpp
+++ b/src/corelib/codecs/qtextcodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1045,7 +1037,7 @@ QTextCodec *QTextCodec::codecForHtml(const QByteArray &ba, QTextCodec *defaultCo
     // determine charset
     QTextCodec *c = QTextCodec::codecForUtfText(ba, 0);
     if (!c) {
-        QByteArray header = ba.left(512).toLower();
+        QByteArray header = ba.left(1024).toLower();
         int pos = header.indexOf("meta ");
         if (pos != -1) {
             pos = header.indexOf("charset=", pos);
diff --git a/src/corelib/codecs/qtextcodec.h b/src/corelib/codecs/qtextcodec.h
index 35ff83a27a..80825954d7 100644
--- a/src/corelib/codecs/qtextcodec.h
+++ b/src/corelib/codecs/qtextcodec.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qtextcodec_p.h b/src/corelib/codecs/qtextcodec_p.h
index 00c067821e..6ed41bf35e 100644
--- a/src/corelib/codecs/qtextcodec_p.h
+++ b/src/corelib/codecs/qtextcodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qtsciicodec.cpp b/src/corelib/codecs/qtsciicodec.cpp
index 974d7e475c..c214ee8d6d 100644
--- a/src/corelib/codecs/qtsciicodec.cpp
+++ b/src/corelib/codecs/qtsciicodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qtsciicodec_p.h b/src/corelib/codecs/qtsciicodec_p.h
index 246b7564c4..62a62b718c 100644
--- a/src/corelib/codecs/qtsciicodec_p.h
+++ b/src/corelib/codecs/qtsciicodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qutfcodec.cpp b/src/corelib/codecs/qutfcodec.cpp
index 4fb32dcc59..8d15a01018 100644
--- a/src/corelib/codecs/qutfcodec.cpp
+++ b/src/corelib/codecs/qutfcodec.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -100,27 +92,44 @@ static inline bool simdDecodeAscii(ushort *&dst, const uchar *&nextAscii, const
     for ( ; end - src >= 16; src += 16, dst += 16) {
         __m128i data = _mm_loadu_si128((__m128i*)src);
 
+#ifdef __AVX2__
+        const int BitSpacing = 2;
+        // load and zero extend to an YMM register
+        const __m256i extended = _mm256_cvtepu8_epi16(data);
+
+        uint n = _mm256_movemask_epi8(extended);
+        if (!n) {
+            // store
+            _mm256_storeu_si256((__m256i*)dst, extended);
+            continue;
+        }
+#else
+        const int BitSpacing = 1;
+
         // check if everything is ASCII
         // movemask extracts the high bit of every byte, so n is non-zero if something isn't ASCII
         uint n = _mm_movemask_epi8(data);
-        if (n) {
-            // copy the front part that is still ASCII
-            while (!(n & 1)) {
-                *dst++ = *src++;
-                n >>= 1;
-            }
+        if (!n) {
+            // unpack
+            _mm_storeu_si128((__m128i*)dst, _mm_unpacklo_epi8(data, _mm_setzero_si128()));
+            _mm_storeu_si128(1+(__m128i*)dst, _mm_unpackhi_epi8(data, _mm_setzero_si128()));
+            continue;
+        }
+#endif
 
-            // find the next probable ASCII character
-            // we don't want to load 16 bytes again in this loop if we know there are non-ASCII
-            // characters still coming
-            n = _bit_scan_reverse(n);
-            nextAscii = src + n + 1;
-            return false;
+        // copy the front part that is still ASCII
+        while (!(n & 1)) {
+            *dst++ = *src++;
+            n >>= BitSpacing;
         }
 
-        // unpack
-        _mm_storeu_si128((__m128i*)dst, _mm_unpacklo_epi8(data, _mm_setzero_si128()));
-        _mm_storeu_si128(1+(__m128i*)dst, _mm_unpackhi_epi8(data, _mm_setzero_si128()));
+        // find the next probable ASCII character
+        // we don't want to load 16 bytes again in this loop if we know there are non-ASCII
+        // characters still coming
+        n = _bit_scan_reverse(n);
+        nextAscii = src + (n / BitSpacing) + 1;
+        return false;
+
     }
     return src == end;
 }
diff --git a/src/corelib/codecs/qutfcodec_p.h b/src/corelib/codecs/qutfcodec_p.h
index c252edede7..eb222bb2d5 100644
--- a/src/corelib/codecs/qutfcodec_p.h
+++ b/src/corelib/codecs/qutfcodec_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qwindowscodec.cpp b/src/corelib/codecs/qwindowscodec.cpp
index cd3f403475..e3395249c0 100644
--- a/src/corelib/codecs/qwindowscodec.cpp
+++ b/src/corelib/codecs/qwindowscodec.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/codecs/qwindowscodec_p.h b/src/corelib/codecs/qwindowscodec_p.h
index 22bde5a382..cefecd1e12 100644
--- a/src/corelib/codecs/qwindowscodec_p.h
+++ b/src/corelib/codecs/qwindowscodec_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/corelib.pro b/src/corelib/corelib.pro
index 812aee3252..2d78041752 100644
--- a/src/corelib/corelib.pro
+++ b/src/corelib/corelib.pro
@@ -31,6 +31,7 @@ ANDROID_PERMISSIONS = \
     android.permission.WRITE_EXTERNAL_STORAGE
 
 load(qt_module)
+load(qfeatures)
 
 include(animation/animation.pri)
 include(arch/arch.pri)
@@ -84,7 +85,6 @@ cmake_umbrella_config_version_file.input = $$PWD/../../mkspecs/features/data/cma
 cmake_umbrella_config_version_file.output = $$DESTDIR/cmake/Qt5/Qt5ConfigVersion.cmake
 
 load(cmake_functions)
-load(qfeatures)
 
 CMAKE_DISABLED_FEATURES = $$join(QT_DISABLED_FEATURES, "$$escape_expand(\\n)    ")
 
@@ -116,17 +116,3 @@ ctest_qt5_module_files.files += $$ctest_macros_file.output $$cmake_extras_mkspec
 ctest_qt5_module_files.path = $$[QT_INSTALL_LIBS]/cmake/Qt5Core
 
 INSTALLS += ctest_qt5_module_files cmake_qt5_umbrella_module_files
-
-mips_dsp:*-g++* {
-    HEADERS += $$MIPS_DSP_HEADERS
-
-    mips_dsp_corelib_assembler.commands = $$QMAKE_CXX -c
-    mips_dsp_corelib_assembler.commands += $(CXXFLAGS) $(INCPATH) -mips32r2 -mdsp ${QMAKE_FILE_IN} -o ${QMAKE_FILE_OUT}
-    mips_dsp_corelib_assembler.dependency_type = TYPE_C
-    mips_dsp_corelib_assembler.output = ${QMAKE_VAR_OBJECTS_DIR}${QMAKE_FILE_BASE}$${first(QMAKE_EXT_OBJ)}
-    mips_dsp_corelib_assembler.input = MIPS_DSP_ASM
-    mips_dsp_corelib_assembler.variable_out = OBJECTS
-    mips_dsp_corelib_assembler.name = assembling[mips_dsp] ${QMAKE_FILE_IN}
-    silent:mips_dsp_corelib_assembler.commands = @echo assembling[mips_dsp] ${QMAKE_FILE_IN} && $$mips_dsp_corelib_assembler.commands
-    QMAKE_EXTRA_COMPILERS += mips_dsp_corelib_assembler
-}
diff --git a/src/corelib/doc/qtcore.qdocconf b/src/corelib/doc/qtcore.qdocconf
index c9c8f1da54..7c879cbbfd 100644
--- a/src/corelib/doc/qtcore.qdocconf
+++ b/src/corelib/doc/qtcore.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtCore
 description             = Qt Core Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = core
diff --git a/src/corelib/doc/snippets/code/src_corelib_global_qglobal.cpp b/src/corelib/doc/snippets/code/src_corelib_global_qglobal.cpp
index b907c9acb1..d804514584 100644
--- a/src/corelib/doc/snippets/code/src_corelib_global_qglobal.cpp
+++ b/src/corelib/doc/snippets/code/src_corelib_global_qglobal.cpp
@@ -136,9 +136,9 @@ int roundedValueB = qRound(valueB);
 qreal valueA = 42949672960.3;
 qreal valueB = 42949672960.7;
 
-int roundedValueA = qRound(valueA);
+qint64 roundedValueA = qRound64(valueA);
 // roundedValueA = 42949672960
-int roundedValueB = qRound(valueB);
+qint64 roundedValueB = qRound64(valueB);
 // roundedValueB = 42949672961
 //! [12]
 
@@ -305,7 +305,7 @@ void load(const QString &fileName)
 {
     QFile file(fileName);
     if (!file.exists())
-        qCritical("File '%s' does not exist!", qPrintable(fileName));
+        qCritical("File '%s' does not exist!", qUtf8Printable(fileName));
 }
 //! [28]
 
@@ -424,7 +424,7 @@ void TheClass::addLabels()
 
 
 //! [37]
-qWarning("%s: %s", qPrintable(key), qPrintable(value));
+qWarning("%s: %s", qUtf8Printable(key), qUtf8Printable(value));
 //! [37]
 
 
diff --git a/src/corelib/doc/snippets/code/src_corelib_io_qstorageinfo.cpp b/src/corelib/doc/snippets/code/src_corelib_io_qstorageinfo.cpp
new file mode 100644
index 0000000000..bba3703325
--- /dev/null
+++ b/src/corelib/doc/snippets/code/src_corelib_io_qstorageinfo.cpp
@@ -0,0 +1,62 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+//! [0]
+    QStorageInfo storage(qApp->applicationDirPath());
+    if (storage.isValid() && storage.isReady()) {
+        // ...
+    }
+//! [0]
+
+//! [1]
+    foreach (const QStorageInfo &storage, QStorageInfo::mountedVolumes()) {
+        if (storage.isValid() && storage.isReady()) {
+            if (!storage.isReadOnly()) {
+                // ...
+            }
+        }
+    }
+//! [1]
+
+//! [2]
+    QStorageInfo storage = QStorageInfo::root();
+
+    qDebug() << storage.rootPath();
+    if (storage.isReadOnly())
+        qDebug() << "isReadOnly:" << storage.isReadOnly();
+
+    qDebug() << "name:" << storage.name();
+    qDebug() << "fileSystemType:" << storage.fileSystemType();
+    qDebug() << "size:" << storage.bytesTotal()/1000/1000 << "MB";
+    qDebug() << "availableSize:" << storage.bytesAvailable()/1000/1000 << "MB";
+//! [2]
diff --git a/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineoption.cpp b/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineoption.cpp
index 67d5f41b38..6d6d7fe2ed 100644
--- a/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineoption.cpp
+++ b/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineoption.cpp
@@ -39,6 +39,7 @@
 ****************************************************************************/
 
 #include <QCommandLineOption>
+#include <QCommandLineParser>
 
 int main()
 {
@@ -48,4 +49,14 @@ QCommandLineOption verboseOption("verbose", "Verbose mode. Prints out more infor
 QCommandLineOption outputOption(QStringList() << "o" << "output", "Write generated data into <file>.", "file");
 //! [0]
 
+//! [cxx11-init]
+QCommandLineParser parser;
+parser.addOption({"verbose", "Verbose mode. Prints out more information."});
+//! [cxx11-init]
+
+//! [cxx11-init-list]
+QCommandLineParser parser;
+parser.addOption({{"o", "output"}, "Write generated data into <file>.", "file"});
+//! [cxx11-init-list]
+
 }
diff --git a/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineparser_main.cpp b/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineparser_main.cpp
index 257a138d0d..26bc43f194 100644
--- a/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineparser_main.cpp
+++ b/src/corelib/doc/snippets/code/src_corelib_tools_qcommandlineparser_main.cpp
@@ -82,3 +82,20 @@ int main(int argc, char *argv[])
 }
 
 //! [0]
+
+void f() {
+//! [cxx11]
+    parser.addOptions({
+        // A boolean option with a single name (-p)
+        {"p",
+            QCoreApplication::translate("main", "Show progress during copy")},
+        // A boolean option with multiple names (-f, --force)
+        {{"f", "force"},
+            QCoreApplication::translate("main", "Overwrite existing files.")},
+        // An option with a value
+        {{"t", "target-directory"},
+            QCoreApplication::translate("main", "Copy all source files into <directory>."),
+            QCoreApplication::translate("main", "directory")},
+    });
+//! [cxx11]
+}
diff --git a/src/corelib/doc/snippets/code/src_corelib_tools_qhash.cpp b/src/corelib/doc/snippets/code/src_corelib_tools_qhash.cpp
index 8c21083976..aa0473964c 100644
--- a/src/corelib/doc/snippets/code/src_corelib_tools_qhash.cpp
+++ b/src/corelib/doc/snippets/code/src_corelib_tools_qhash.cpp
@@ -297,3 +297,13 @@ while (i != hash.end() && i.key() == "plenty") {
     ++i;
 }
 //! [26]
+
+//! [qhashbits]
+inline uint qHash(const std::vector<int> &key, uint seed = 0)
+{
+    if (key.empty())
+        return seed;
+    else
+        return qHashBits(&key.front(), key.size() * sizeof(int), seed);
+}
+//! [qhashbits]
diff --git a/src/plugins/platforms/winrt/qwinrtplatformtheme.h b/src/corelib/doc/snippets/qbytearraylist/main.cpp
index f4a61982b2..be462dea60 100644
--- a/src/plugins/platforms/winrt/qwinrtplatformtheme.h
+++ b/src/corelib/doc/snippets/qbytearraylist/main.cpp
@@ -1,9 +1,9 @@
 /****************************************************************************
 **
-** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 by Southwest Research Institute (R)
 ** Contact: http://www.qt-project.org/legal
 **
-** This file is part of the plugins of the Qt Toolkit.
+** This file is part of the QtCore module of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:LGPL$
 ** Commercial License Usage
@@ -39,22 +39,13 @@
 **
 ****************************************************************************/
 
-#ifndef QWINRTPLATFORMTHEME_H
-#define QWINRTPLATFORMTHEME_H
 
-#include <qpa/qplatformtheme.h>
+#include <QByteArrayList>
 
-QT_BEGIN_NAMESPACE
-
-class QWinRTPlatformTheme : public QPlatformTheme
+int main(int, char **)
 {
-public:
-    QWinRTPlatformTheme();
-
-    bool usePlatformNativeDialog(DialogType type) const;
-    QPlatformDialogHelper *createPlatformDialogHelper(DialogType type) const;
-};
-
-QT_END_NAMESPACE
-
-#endif // QWINRTPLATFORMTHEME_H
+    QByteArray ba1, ba2, ba3;
+//! [0]
+    QByteArrayList longerList = (QByteArrayList() << ba1 << ba2 << ba3);
+//! [0]
+}
diff --git a/src/corelib/doc/snippets/qbytearraylist/qbytearraylist.pro b/src/corelib/doc/snippets/qbytearraylist/qbytearraylist.pro
new file mode 100644
index 0000000000..87397b491d
--- /dev/null
+++ b/src/corelib/doc/snippets/qbytearraylist/qbytearraylist.pro
@@ -0,0 +1,2 @@
+QT = core
+SOURCES = main.cpp
diff --git a/src/corelib/doc/snippets/qloggingcategory/main.cpp b/src/corelib/doc/snippets/qloggingcategory/main.cpp
index 628243dbdd..3c6424921e 100644
--- a/src/corelib/doc/snippets/qloggingcategory/main.cpp
+++ b/src/corelib/doc/snippets/qloggingcategory/main.cpp
@@ -1,6 +1,6 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the examples of the Qt Toolkit.
@@ -43,12 +43,15 @@
 
 //![1]
 // in a header
-Q_DECLARE_LOGGING_CATEGORY(QT_DRIVER_USB)
+Q_DECLARE_LOGGING_CATEGORY(driverUsb)
 
 // in one source file
-Q_LOGGING_CATEGORY(QT_DRIVER_USB, "qt.driver.usb")
+Q_LOGGING_CATEGORY(driverUsb, "driver.usb")
 //![1]
 
+//![5]
+Q_LOGGING_CATEGORY(driverUsbEvents, "driver.usb.events", QtWarningMsg)
+//![5]
 
 // Completely made up example, inspired by en.wikipedia.org/wiki/USB :)
 struct UsbEntry {
@@ -76,8 +79,8 @@ QLoggingCategory::CategoryFilter oldCategoryFilter;
 
 void myCategoryFilter(QLoggingCategory *category)
 {
-    // configure qt.driver.usb category here, otherwise forward to to default filter.
-    if (qstrcmp(category->categoryName(), "qt.driver.usb") == 0)
+    // configure driver.usb category here, otherwise forward to to default filter.
+    if (qstrcmp(category->categoryName(), "driver.usb") == 0)
         category->setEnabled(QtDebugMsg, true);
     else
         oldCategoryFilter(category);
@@ -89,7 +92,7 @@ int main(int argc, char *argv[])
     QCoreApplication a(argc, argv);
 
 //![2]
-    QLoggingCategory::setFilterRules(QStringLiteral("qt.driver.usb.debug=true"));
+    QLoggingCategory::setFilterRules(QStringLiteral("driver.usb.debug=true"));
 //![2]
 
 //![22]
@@ -103,48 +106,48 @@ oldCategoryFilter = QLoggingCategory::installFilter(myCategoryFilter);
 //![3]
 
 //![4]
-    // usbEntries() will only be called if QT_DRIVER_USB category is enabled
-    qCDebug(QT_DRIVER_USB) << "devices: " << usbEntries();
+    // usbEntries() will only be called if driverUsb category is enabled
+    qCDebug(driverUsb) << "devices: " << usbEntries();
 //![4]
 
     {
 //![10]
-    QLoggingCategory category("qt.driver.usb");
+    QLoggingCategory category("driver.usb");
     qCDebug(category) << "a debug message";
 //![10]
     }
 
     {
 //![11]
-    QLoggingCategory category("qt.driver.usb");
+    QLoggingCategory category("driver.usb");
     qCWarning(category) << "a warning message";
 //![11]
     }
 
     {
 //![12]
-    QLoggingCategory category("qt.driver.usb");
+    QLoggingCategory category("driver.usb");
     qCCritical(category) << "a critical message";
 //![12]
     }
 
     {
 //![13]
-    QLoggingCategory category("qt.driver.usb");
+    QLoggingCategory category("driver.usb");
     qCDebug(category, "a debug message logged into category %s", category.categoryName());
 //![13]
     }
 
     {
 //![14]
-    QLoggingCategory category("qt.driver.usb");
+    QLoggingCategory category("driver.usb");
     qCWarning(category, "a warning message logged into category %s", category.categoryName());
 //![14]
     }
 
     {
 //![15]
-    QLoggingCategory category("qt.driver.usb");
+    QLoggingCategory category("driver.usb");
     qCCritical(category, "a critical message logged into category %s", category.categoryName());
 //![15]
     }
diff --git a/src/corelib/doc/snippets/qprocess-environment/main.cpp b/src/corelib/doc/snippets/qprocess-environment/main.cpp
index d858746889..2e078eea6d 100644
--- a/src/corelib/doc/snippets/qprocess-environment/main.cpp
+++ b/src/corelib/doc/snippets/qprocess-environment/main.cpp
@@ -47,7 +47,6 @@ void startProcess()
 QProcess process;
 QStringList env = QProcess::systemEnvironment();
 env << "TMPDIR=C:\\MyApp\\temp"; // Add an environment variable
-env.replaceInStrings(QRegExp("^PATH=(.*)", Qt::CaseInsensitive), "PATH=\\1;C:\\Bin");
 process.setEnvironment(env);
 process.start("myapp");
 //! [0]
@@ -58,7 +57,6 @@ process.start("myapp");
 QProcess process;
 QProcessEnvironment env = QProcessEnvironment::systemEnvironment();
 env.insert("TMPDIR", "C:\\MyApp\\temp"); // Add an environment variable
-env.insert("PATH", env.value("Path") + ";C:\\Bin");
 process.setProcessEnvironment(env);
 process.start("myapp");
 //! [1]
diff --git a/src/corelib/doc/snippets/qversionnumber/main.cpp b/src/corelib/doc/snippets/qversionnumber/main.cpp
new file mode 100644
index 0000000000..ba72a52816
--- /dev/null
+++ b/src/corelib/doc/snippets/qversionnumber/main.cpp
@@ -0,0 +1,109 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Keith Gardner <kreios4004@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
+**     of its contributors may be used to endorse or promote products derived
+**     from this software without specific prior written permission.
+**
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QVersionNumber>
+
+class Object
+{
+public:
+    static void genericExample();
+    static void equalityExample();
+    static void isPrefixOf();
+    static void parse();
+    static void equivalent();
+};
+
+void Object::genericExample()
+{
+    //! [0]
+    QVersionNumber version(1, 2, 3);  // 1.2.3
+    //! [0]
+}
+
+void Object::equalityExample()
+{
+    //! [1]
+    QVersionNumber v1(1, 2);
+    QVersionNumber v2(1, 2, 0);
+    int compare = QVersionNumber::compare(v1, v2); // compare == -1
+    //! [1]
+}
+
+void Object::isPrefixOf()
+{
+    //! [2]
+    QVersionNumber v1(5, 3);
+    QVersionNumber v2(5, 3, 1);
+    bool value = v1.isPrefixOf(v2); // true
+    //! [2]
+}
+
+void QObject::parse()
+{
+    //! [3]
+    QString string("5.4.0-alpha");
+    int suffixIndex;
+    QVersionNumber version = QVersionNumber::fromString(string, &suffixIndex);
+    // version is 5.4.0
+    // suffixIndex is 5
+    //! [3]
+}
+
+void Object::equivalent()
+{
+    //! [4]
+    QVersionNumber v1(5, 4);
+    QVersionNumber v2(5, 4, 0);
+    bool equivalent = v1.normalized() == v2.normalized();
+    bool equal = v1 == v2;
+    // equivalent is true
+    // equal is false
+    //! [4]
+}
+
+int main()
+{
+    Object::genericExample();
+    Object::equalityExample();
+    Object::isPrefixOf();
+    Object::parse();
+    Object::equivalent();
+}
diff --git a/src/corelib/doc/snippets/signalsandslots/signalsandslots.cpp b/src/corelib/doc/snippets/signalsandslots/signalsandslots.cpp
index 91cd3de9d2..357269bac0 100644
--- a/src/corelib/doc/snippets/signalsandslots/signalsandslots.cpp
+++ b/src/corelib/doc/snippets/signalsandslots/signalsandslots.cpp
@@ -38,8 +38,6 @@
 **
 ****************************************************************************/
 
-#include <QAbstractButton>
-
 #include "signalsandslots.h"
 
 //! [0]
@@ -66,19 +64,4 @@ int main()
 //! [3] //! [4]
     b.setValue(48);     // a.value() == 12, b.value() == 48
 //! [4]
-
-
-    QWidget *widget = reinterpret_cast<QWidget *>(new QObject(0));
-//! [5]
-    if (widget->inherits("QAbstractButton")) {
-        QAbstractButton *button = static_cast<QAbstractButton *>(widget);
-        button->toggle();
-//! [5] //! [6]
-    }
-//! [6]
-
-//! [7]
-    if (QAbstractButton *button = qobject_cast<QAbstractButton *>(widget))
-        button->toggle();
-//! [7]
 }
diff --git a/src/corelib/doc/src/custom-types.qdoc b/src/corelib/doc/src/custom-types.qdoc
index ed846aee83..bac4a90829 100644
--- a/src/corelib/doc/src/custom-types.qdoc
+++ b/src/corelib/doc/src/custom-types.qdoc
@@ -147,7 +147,7 @@
     The output sent to the debug stream can, of course, be made as simple or as
     complicated as you like. Note that the value returned by this function is
     the QDebug object itself, though this is often obtained by calling the
-    maybeSpace() member function of QDebug that pads out the stream with space
+    \l{QDebug::}{maybeSpace()} member function of QDebug that pads out the stream with space
     characters to make it more readable.
 
     \section1 Further Reading
diff --git a/src/corelib/doc/src/eventsandfilters.qdoc b/src/corelib/doc/src/eventsandfilters.qdoc
index a880cc8187..d9b2e35e19 100644
--- a/src/corelib/doc/src/eventsandfilters.qdoc
+++ b/src/corelib/doc/src/eventsandfilters.qdoc
@@ -194,7 +194,7 @@
     \l{QCoreApplication::}{sendEvent()} processes the event immediately.
     When it returns, the event filters and/or the object itself have
     already processed the event. For many event classes there is a function
-    called isAccepted() that tells you whether the event was accepted
+    called \l{QEvent::}{isAccepted()} that tells you whether the event was accepted
     or rejected by the last handler that was called.
 
     \l{QCoreApplication::}{postEvent()} posts the event on a queue for
diff --git a/src/corelib/doc/src/filestorage.qdoc b/src/corelib/doc/src/filestorage.qdoc
index fb1279cea5..394d920923 100644
--- a/src/corelib/doc/src/filestorage.qdoc
+++ b/src/corelib/doc/src/filestorage.qdoc
@@ -30,15 +30,15 @@
 \title File and Datastream Functions
 
 The QIODevice class is the base interface class of all I/O devices in
-\l {Qt Core}.  QIODevice provides both a common implementation and an
+\l{Qt Core}.  QIODevice provides both a common implementation and an
 abstract interface for devices that support reading and writing of blocks
 of data. The device can be a memory buffer, a file, or a datastream.
 
 Some subclasses like QFile have been implemented using a memory buffer for
 intermediate storing of data. This speeds up programs by reducing
-read/write operations. Buffering makes functions like getChar() and putChar()
-fast, as they can operate on the memory buffer instead of directly on the
-device itself.
+read/write operations. Buffering makes functions like \l{QFile::}{getChar()} and
+\l{QFile::}{putChar()} fast, as they can operate on the memory buffer instead of
+directly on the device itself.
 
 The QFile class provides functions for reading from and writing to files.
 A QFile may be used by itself or, more conveniently, with a QTextStream or
@@ -48,6 +48,7 @@ QBuffer allows you to access a QByteArray using the QIODevice interface.
 The QByteArray is treated just as a standard random-accessed file.
 An example:
 
+\code
      QBuffer buffer;
      char ch;
 
@@ -58,12 +59,13 @@ An example:
      buffer.getChar(&ch);  // ch == 't'
      buffer.getChar(&ch);  // ch == ' '
      buffer.getChar(&ch);  // ch == 'r'
+\endcode
 
-Call open() to open the buffer. Then call write() or putChar() to write to
-the buffer, and read(), readLine(), readAll(), or getChar() to read from it.
-size() returns the current size of the buffer, and you can seek to arbitrary
-positions in the buffer by calling seek(). When you are done with accessing
-the buffer, call close().
+Call \l{QBuffer::}{open()} to open the buffer. Then call \l{QBuffer::}{write()} or \l{QBuffer::}{putChar()} to write to
+the buffer, and \l{QBuffer::}{read()}, \l{QBuffer::}{readLine()}, \l{QBuffer::}{readAll()}, or \l{QBuffer::}{getChar()} to read from it.
+\l{QBuffer::}{size()} returns the current size of the buffer, and you can seek to arbitrary
+positions in the buffer by calling \l{QBuffer::}{seek()}. When you are done with accessing
+the buffer, call \l{QBuffer::}{close()}.
 
 The QDataStream class provides serialization of binary data to a QIODevice.
 A data stream is a binary stream of encoded information which is 100% inde-
@@ -91,7 +93,7 @@ There are three general ways to use QTextStream when reading text files:
     \li Character by character, by streaming into QChar or char types. This
         method is often used for convenient input handling when parsing files,
         independent of character encoding and end-of-line semantics. To skip
-        white space, call skipWhiteSpace().
+        white space, call \l{QTextStream::}{skipWhiteSpace()}.
 \endlist
 
 QByteArray can be used to store both raw bytes (including \c{\0}) and traditional
diff --git a/src/corelib/doc/src/objectmodel/properties.qdoc b/src/corelib/doc/src/objectmodel/properties.qdoc
index 70f0b88e06..8a6c7f53d9 100644
--- a/src/corelib/doc/src/objectmodel/properties.qdoc
+++ b/src/corelib/doc/src/objectmodel/properties.qdoc
@@ -226,7 +226,7 @@
     In the example, the enumeration type that is the property type is
     declared in MyClass and registered with the \l{Meta-Object System}
     using the Q_ENUMS() macro. This makes the enumeration values
-    available as strings for use as in the call to setProperty(). Had
+    available as strings for use as in the call to \l{QObject::}{setProperty()}. Had
     the enumeration type been declared in another class, its fully
     qualified name (i.e., OtherClass::Priority) would be required, and
     that other class would also have to inherit QObject and register
@@ -249,7 +249,7 @@
     If the value is \e not compatible with the property's type, the
     property is \e not changed, and false is returned. But if the
     property with the given name doesn't exist in the QObject (i.e.,
-    if it wasn't declared with Q_PROPERTY(), a new property with the
+    if it wasn't declared with Q_PROPERTY()), a new property with the
     given name and value is automatically added to the QObject, but
     false is still returned. This means that a return of false can't
     be used to determine whether a particular property was actually
diff --git a/src/corelib/doc/src/objectmodel/signalsandslots.qdoc b/src/corelib/doc/src/objectmodel/signalsandslots.qdoc
index e894d547d0..f79e8a7dca 100644
--- a/src/corelib/doc/src/objectmodel/signalsandslots.qdoc
+++ b/src/corelib/doc/src/objectmodel/signalsandslots.qdoc
@@ -36,7 +36,8 @@
     Signals and slots are used for communication between objects. The
     signals and slots mechanism is a central feature of Qt and
     probably the part that differs most from the features provided by
-    other frameworks.
+    other frameworks. Signals and slots are made possible by Qt's
+    \l{The Meta-Object System}{meta-object system}.
 
     \tableofcontents
 
@@ -48,17 +49,14 @@
     if a user clicks a \uicontrol{Close} button, we probably want the
     window's \l{QWidget::close()}{close()} function to be called.
 
-    Older toolkits achieve this kind of communication using
+    Other toolkits achieve this kind of communication using
     callbacks. A callback is a pointer to a function, so if you want
     a processing function to notify you about some event you pass a
     pointer to another function (the callback) to the processing
     function. The processing function then calls the callback when
-    appropriate. Callbacks have two fundamental flaws: Firstly, they
-    are not type-safe. We can never be certain that the processing
-    function will call the callback with the correct arguments.
-    Secondly, the callback is strongly coupled to the processing
-    function since the processing function must know which callback
-    to call.
+    appropriate. While successful frameworks using this method do exist,
+    callbacks can be unintuitive and may suffer from problems in ensuring
+    the type-correctness of callback arguments.
 
     \section1 Signals and Slots
 
@@ -112,87 +110,6 @@
     Together, signals and slots make up a powerful component programming
     mechanism.
 
-    \section1 A Small Example
-
-    A minimal C++ class declaration might read:
-
-    \snippet signalsandslots/signalsandslots.h 0
-
-    A small QObject-based class might read:
-
-    \snippet signalsandslots/signalsandslots.h 1
-    \codeline
-    \snippet signalsandslots/signalsandslots.h 2
-    \snippet signalsandslots/signalsandslots.h 3
-
-    The QObject-based version has the same internal state, and provides
-    public methods to access the state, but in addition it has support
-    for component programming using signals and slots. This class can
-    tell the outside world that its state has changed by emitting a
-    signal, \c{valueChanged()}, and it has a slot which other objects
-    can send signals to.
-
-    All classes that contain signals or slots must mention
-    Q_OBJECT at the top of their declaration. They must also derive
-    (directly or indirectly) from QObject.
-
-    Slots are implemented by the application programmer.
-    Here is a possible implementation of the \c{Counter::setValue()}
-    slot:
-
-    \snippet signalsandslots/signalsandslots.cpp 0
-
-    The \c{emit} line emits the signal \c valueChanged() from the
-    object, with the new value as argument.
-
-    In the following code snippet, we create two \c Counter objects
-    and connect the first object's \c valueChanged() signal to the
-    second object's \c setValue() slot using QObject::connect():
-
-    \snippet signalsandslots/signalsandslots.cpp 1
-    \snippet signalsandslots/signalsandslots.cpp 2
-    \codeline
-    \snippet signalsandslots/signalsandslots.cpp 3
-    \snippet signalsandslots/signalsandslots.cpp 4
-
-    Calling \c{a.setValue(12)} makes \c{a} emit a
-    \c{valueChanged(12)} signal, which \c{b} will receive in its
-    \c{setValue()} slot, i.e. \c{b.setValue(12)} is called. Then
-    \c{b} emits the same \c{valueChanged()} signal, but since no slot
-    has been connected to \c{b}'s \c{valueChanged()} signal, the
-    signal is ignored.
-
-    Note that the \c{setValue()} function sets the value and emits
-    the signal only if \c{value != m_value}. This prevents infinite
-    looping in the case of cyclic connections (e.g., if
-    \c{b.valueChanged()} were connected to \c{a.setValue()}).
-
-    By default, for every connection you make, a signal is emitted;
-    two signals are emitted for duplicate connections. You can break
-    all of these connections with a single disconnect() call.
-    If you pass the Qt::UniqueConnection \a type, the connection will only
-    be made if it is not a duplicate. If there is already a duplicate
-    (exact same signal to the exact same slot on the same objects),
-    the connection will fail and connect will return false
-
-    This example illustrates that objects can work together without needing to
-    know any information about each other. To enable this, the objects only
-    need to be connected together, and this can be achieved with some simple
-    QObject::connect() function calls, or with \c{uic}'s
-    \l{Using a Designer UI File in Your Application#Automatic Connections}
-    {automatic connections} feature.
-
-    \section1 Building the Example
-
-    The C++ preprocessor changes or removes the \c{signals},
-    \c{slots}, and \c{emit} keywords so that the compiler is
-    presented with standard C++.
-
-    By running the \l moc on class definitions that contain signals
-    or slots, a C++ source file is produced which should be compiled
-    and linked with the other object files for the application. If
-    you use \l qmake, the makefile rules to automatically invoke \c
-    moc will be added to your project's makefile.
 
     \section1 Signals
 
@@ -267,27 +184,77 @@
     alongside a Qt-based application. To solve this problem, \c
     #undef the offending preprocessor symbol.
 
-    \section1 Meta-Object Information
 
-    The meta-object compiler (\l moc) parses the class declaration in
-    a C++ file and generates C++ code that initializes the
-    meta-object. The meta-object contains the names of all the signal
-    and slot members, as well as pointers to these functions.
+    \section1 A Small Example
+
+    A minimal C++ class declaration might read:
+
+    \snippet signalsandslots/signalsandslots.h 0
+
+    A small QObject-based class might read:
+
+    \snippet signalsandslots/signalsandslots.h 1
+    \codeline
+    \snippet signalsandslots/signalsandslots.h 2
+    \snippet signalsandslots/signalsandslots.h 3
+
+    The QObject-based version has the same internal state, and provides
+    public methods to access the state, but in addition it has support
+    for component programming using signals and slots. This class can
+    tell the outside world that its state has changed by emitting a
+    signal, \c{valueChanged()}, and it has a slot which other objects
+    can send signals to.
+
+    All classes that contain signals or slots must mention
+    Q_OBJECT at the top of their declaration. They must also derive
+    (directly or indirectly) from QObject.
+
+    Slots are implemented by the application programmer.
+    Here is a possible implementation of the \c{Counter::setValue()}
+    slot:
+
+    \snippet signalsandslots/signalsandslots.cpp 0
+
+    The \c{emit} line emits the signal \c valueChanged() from the
+    object, with the new value as argument.
+
+    In the following code snippet, we create two \c Counter objects
+    and connect the first object's \c valueChanged() signal to the
+    second object's \c setValue() slot using QObject::connect():
 
-    The meta-object contains additional information such as the
-    object's \l{QMetaObject::className()}{class name}. You can
-    also check if an object \l{QObject::inherits()}{inherits}
-    a specific class, for example:
+    \snippet signalsandslots/signalsandslots.cpp 1
+    \snippet signalsandslots/signalsandslots.cpp 2
+    \codeline
+    \snippet signalsandslots/signalsandslots.cpp 3
+    \snippet signalsandslots/signalsandslots.cpp 4
+
+    Calling \c{a.setValue(12)} makes \c{a} emit a
+    \c{valueChanged(12)} signal, which \c{b} will receive in its
+    \c{setValue()} slot, i.e. \c{b.setValue(12)} is called. Then
+    \c{b} emits the same \c{valueChanged()} signal, but since no slot
+    has been connected to \c{b}'s \c{valueChanged()} signal, the
+    signal is ignored.
 
-    \snippet signalsandslots/signalsandslots.cpp 5
-    \snippet signalsandslots/signalsandslots.cpp 6
+    Note that the \c{setValue()} function sets the value and emits
+    the signal only if \c{value != m_value}. This prevents infinite
+    looping in the case of cyclic connections (e.g., if
+    \c{b.valueChanged()} were connected to \c{a.setValue()}).
 
-    The meta-object information is also used by qobject_cast<T>(), which
-    is similar to QObject::inherits() but is less error-prone:
+    By default, for every connection you make, a signal is emitted;
+    two signals are emitted for duplicate connections. You can break
+    all of these connections with a single disconnect() call.
+    If you pass the Qt::UniqueConnection \a type, the connection will only
+    be made if it is not a duplicate. If there is already a duplicate
+    (exact same signal to the exact same slot on the same objects),
+    the connection will fail and connect will return false
 
-    \snippet signalsandslots/signalsandslots.cpp 7
+    This example illustrates that objects can work together without needing to
+    know any information about each other. To enable this, the objects only
+    need to be connected together, and this can be achieved with some simple
+    QObject::connect() function calls, or with \c{uic}'s
+    \l{Using a Designer UI File in Your Application#Automatic Connections}
+    {automatic connections} feature.
 
-    See \l{Meta-Object System} for more information.
 
     \section1 A Real Example
 
@@ -392,7 +359,7 @@
     compatible with the slot's arguments. Arguments can also be implicitly
     converted by the compiler, if needed.
 
-    You can also connect to functors or C++11 lamdas:
+    You can also connect to functors or C++11 lambdas:
 
     \code
     connect(sender, &QObject::destroyed, [=](){ this->m_objects.remove(sender); });
diff --git a/src/corelib/global/archdetect.cpp b/src/corelib/global/archdetect.cpp
new file mode 100644
index 0000000000..14fb4346bf
--- /dev/null
+++ b/src/corelib/global/archdetect.cpp
@@ -0,0 +1,125 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Intel Corporation
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the FOO module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qprocessordetection.h"
+
+// main part: processor type
+#if defined(Q_PROCESSOR_ALPHA)
+#  define ARCH_PROCESSOR "alpha"
+#elif defined(Q_PROCESSOR_ARM_32)
+#  define ARCH_PROCESSOR "arm"
+#elif defined(Q_PROCESSOR_ARM_64)
+#  define ARCH_PROCESSOR "arm64"
+#elif defined(Q_PROCESSOR_AVR32)
+#  define ARCH_PROCESSOR "avr32"
+#elif defined(Q_PROCESSOR_BLACKFIN)
+#  define ARCH_PROCESSOR "bfin"
+#elif defined(Q_PROCESSOR_X86_32)
+#  define ARCH_PROCESSOR "i386"
+#elif defined(Q_PROCESSOR_X86_64)
+#  define ARCH_PROCESSOR "x86_64"
+#elif defined(Q_PROCESSOR_IA64)
+#  define ARCH_PROCESSOR "ia64"
+#elif defined(Q_PROCESSOR_MIPS_64)
+#  define ARCH_PROCESSOR "mips64"
+#elif defined(Q_PROCESSOR_MIPS)
+#  define ARCH_PROCESSOR "mips"
+#elif defined(Q_PROCESSOR_POWER_32)
+#  define ARCH_PROCESSOR "power"
+#elif defined(Q_PROCESSOR_POWER_64)
+#  define ARCH_PROCESSOR "power64"
+#elif defined(Q_PROCESSOR_S390_X)
+#  define ARCH_PROCESSOR "s390x"
+#elif defined(Q_PROCESSOR_S390)
+#  define ARCH_PROCESSOR "s390"
+#elif defined(Q_PROCESSOR_SH)
+#  define ARCH_PROCESSOR "sh"
+#elif defined(Q_PROCESSORS_SPARC_64)
+#  define ARCH_PROCESSOR "sparc64"
+#elif defined(Q_PROCESSOR_SPARC_V9)
+#  define ARCH_PROCESSOR "sparcv9"
+#elif defined(Q_PROCESSOR_SPARC)
+#  define ARCH_PROCESSOR "sparc"
+#else
+#  define ARCH_PROCESSOR "unknown"
+#endif
+
+// endianness
+#if Q_BYTE_ORDER == Q_LITTLE_ENDIAN
+#  define ARCH_ENDIANNESS "little_endian"
+#elif Q_BYTE_ORDER == Q_BIG_ENDIAN
+#  define ARCH_ENDIANNESS "big_endian"
+#endif
+
+// pointer type
+#if defined(Q_OS_WIN64) || (defined(Q_OS_WINRT) && defined(_M_X64))
+#  define ARCH_POINTER "llp64"
+#elif defined(__LP64__) || QT_POINTER_SIZE - 0 == 8
+#  define ARCH_POINTER "lp64"
+#else
+#  define ARCH_POINTER "ilp32"
+#endif
+
+// qreal type, if not double (includes the dash)
+#ifdef QT_COORD_TYPE_STRING
+#  define ARCH_COORD_TYPE   "-qreal_" QT_COORD_TYPE_STRING
+#else
+#  define ARCH_COORD_TYPE  ""
+#endif
+
+// secondary: ABI string (includes the dash)
+#if defined(__ARM_EABI__) || defined(__mips_eabi)
+#  define ARCH_ABI1 "-eabi"
+#elif defined(_MIPS_SIM)
+#  if _MIPS_SIM == _ABIO32
+#    define ARCH_ABI1 "-o32"
+#  elif _MIPS_SIM == _ABIN32
+#    define ARCH_ABI1 "-n32"
+#  elif _MIPS_SIM == _ABI64
+#    define ARCH_ABI1 "-n64"
+#  elif _MIPS_SIM == _ABIO64
+#    define ARCH_ABI1 "-o64"
+#  endif
+#else
+#  define ARCH_ABI1 ""
+#endif
+#if defined(__ARM_PCS_VFP) || defined(__mips_hard_float)
+#  define ARCH_ABI2 "-hardfloat"
+#else
+#  define ARCH_ABI2 ""
+#endif
+
+#define ARCH_ABI ARCH_ABI1 ARCH_ABI2
+
+#define ARCH_FULL ARCH_PROCESSOR "-" ARCH_ENDIANNESS "-" ARCH_POINTER ARCH_COORD_TYPE ARCH_ABI
diff --git a/src/corelib/global/global.pri b/src/corelib/global/global.pri
index efa585ff3e..fb0e7fd708 100644
--- a/src/corelib/global/global.pri
+++ b/src/corelib/global/global.pri
@@ -16,15 +16,18 @@ HEADERS +=  \
         global/qsysinfo.h \
         global/qisenum.h \
         global/qtypetraits.h \
-        global/qflags.h
+        global/qflags.h \
+        global/qhooks_p.h
 
 SOURCES += \
+        global/archdetect.cpp \
 	global/qglobal.cpp \
         global/qglobalstatic.cpp \
         global/qlibraryinfo.cpp \
 	global/qmalloc.cpp \
         global/qnumeric.cpp \
-        global/qlogging.cpp
+        global/qlogging.cpp \
+        global/qhooks.cpp
 
 # qlibraryinfo.cpp includes qconfig.cpp
 INCLUDEPATH += $$QT_BUILD_TREE/src/corelib/global
diff --git a/src/corelib/global/qcompilerdetection.h b/src/corelib/global/qcompilerdetection.h
index b12f944357..ac60d47c7e 100644
--- a/src/corelib/global/qcompilerdetection.h
+++ b/src/corelib/global/qcompilerdetection.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -89,7 +81,9 @@
 #  define Q_CC_MSVC
 #  define Q_CC_MSVC_NET
 #  define Q_OUTOFLINE_TEMPLATE inline
-#  define Q_NO_TEMPLATE_FRIENDS
+#  if _MSC_VER < 1600
+#    define Q_NO_TEMPLATE_FRIENDS
+#  endif
 #  define Q_COMPILER_MANGLES_RETURN_TYPE
 #  define Q_FUNC_INFO __FUNCSIG__
 #  define Q_ALIGNOF(type) __alignof(type)
@@ -200,6 +194,8 @@
 #  define Q_UNLIKELY(expr)  __builtin_expect(!!(expr), false)
 #  define Q_NORETURN        __attribute__((__noreturn__))
 #  define Q_REQUIRED_RESULT __attribute__ ((__warn_unused_result__))
+#  define Q_DECL_PURE_FUNCTION __attribute__((pure))
+#  define Q_DECL_CONST_FUNCTION __attribute__((const))
 #  if !defined(QT_MOC_CPP)
 #    define Q_PACKED __attribute__ ((__packed__))
 #    ifndef __ARM_EABI__
@@ -439,59 +435,55 @@
 /*
  * C++11 support
  *
- *  Paper           Macro
+ *  Paper           Macro                               SD-6 macro
  *  N2341           Q_COMPILER_ALIGNAS
  *  N2341           Q_COMPILER_ALIGNOF
  *  N2427           Q_COMPILER_ATOMICS
- *  N2761           Q_COMPILER_ATTRIBUTES
+ *  N2761           Q_COMPILER_ATTRIBUTES               __cpp_attributes = 200809
  *  N2541           Q_COMPILER_AUTO_FUNCTION
  *  N1984 N2546     Q_COMPILER_AUTO_TYPE
  *  N2437           Q_COMPILER_CLASS_ENUM
- *  N2235           Q_COMPILER_CONSTEXPR
- *  N2343 N3276     Q_COMPILER_DECLTYPE
+ *  N2235           Q_COMPILER_CONSTEXPR                __cpp_constexpr = 200704
+ *  N2343 N3276     Q_COMPILER_DECLTYPE                 __cpp_decltype = 200707
  *  N2346           Q_COMPILER_DEFAULT_MEMBERS
  *  N2346           Q_COMPILER_DELETE_MEMBERS
  *  N1986           Q_COMPILER_DELEGATING_CONSTRUCTORS
  *  N2437           Q_COMPILER_EXPLICIT_CONVERSIONS
- *  N3206 N3272     Q_COMPILER_EXPLICIT_OVERRIDES   (v0.9 and above only)
+ *  N3206 N3272     Q_COMPILER_EXPLICIT_OVERRIDES
  *  N1987           Q_COMPILER_EXTERN_TEMPLATES
  *  N2540           Q_COMPILER_INHERITING_CONSTRUCTORS
  *  N2672           Q_COMPILER_INITIALIZER_LISTS
- *  N2658 N2927     Q_COMPILER_LAMBDA   (v1.0 and above only)
+ *  N2658 N2927     Q_COMPILER_LAMBDA                   __cpp_lambdas = 200907
  *  N2756           Q_COMPILER_NONSTATIC_MEMBER_INIT
  *  N2855 N3050     Q_COMPILER_NOEXCEPT
  *  N2431           Q_COMPILER_NULLPTR
  *  N2930           Q_COMPILER_RANGE_FOR
- *  N2442           Q_COMPILER_RAW_STRINGS
+ *  N2442           Q_COMPILER_RAW_STRINGS              __cpp_raw_strings = 200710
  *  N2439           Q_COMPILER_REF_QUALIFIERS
- *  N2118 N2844 N3053 Q_COMPILER_RVALUE_REFS   (Note: GCC 4.3 implements only the oldest)
- *  N1720           Q_COMPILER_STATIC_ASSERT
+ *  N2118 N2844 N3053 Q_COMPILER_RVALUE_REFS            __cpp_rvalue_references = 200610
+ *  N1720           Q_COMPILER_STATIC_ASSERT            __cpp_static_assert = 200410
  *  N2258           Q_COMPILER_TEMPLATE_ALIAS
  *  N2659           Q_COMPILER_THREAD_LOCAL
- *  N2765           Q_COMPILER_UDL
- *  N2442           Q_COMPILER_UNICODE_STRINGS
+ *  N2660           Q_COMPILER_THREADSAFE_STATICS
+ *  N2765           Q_COMPILER_UDL                      __cpp_user_defined_literals = 200809
+ *  N2442           Q_COMPILER_UNICODE_STRINGS          __cpp_unicode_literals = 200710
  *  N2640           Q_COMPILER_UNIFORM_INIT
  *  N2544           Q_COMPILER_UNRESTRICTED_UNIONS
  *  N1653           Q_COMPILER_VARIADIC_MACROS
- *  N2242 N2555     Q_COMPILER_VARIADIC_TEMPLATES
- *
- * C++1y proposed features
+ *  N2242 N2555     Q_COMPILER_VARIADIC_TEMPLATES       __cpp_variadic_templates = 200704
  *
- *  N3472           Q_COMPILER_BINARY_LITERALS
- *  N3649           Q_COMPILER_GENERIC_LAMBDA
- *  N3638           Q_COMPILER_LAMBDA_CAPTURES
- *  N3652           Q_COMPILER_RELAXED_CONSTEXPR_FUNCTIONS
- *  N3386 N3638     Q_COMPILER_RETURN_TYPE_DEDUCTION
- *  N3651           Q_COMPILER_VARIABLE_TEMPLATES
- *
- * C++14 Technical Specifications / C++17:
- *  N3639           Q_COMPILER_VLA  (see also Q_COMPILER_RESTRICTED_VLA)
+ * For any future version of the C++ standard, we use only the SD-6 macro.
+ * For full listing, see
+ *  http://isocpp.org/std/standing-documents/sd-6-sg10-feature-test-recommendations
  *
+ * C++ extensions:
+ *  Q_COMPILER_RESTRICTED_VLA       variable-length arrays, prior to __cpp_runtime_arrays
  */
 
 #ifdef Q_CC_INTEL
 #  define Q_COMPILER_RESTRICTED_VLA
 #  define Q_COMPILER_VARIADIC_MACROS // C++11 feature supported as an extension in other modes, too
+#  define Q_COMPILER_THREADSAFE_STATICS
 #  if __INTEL_COMPILER < 1200
 #    define Q_NO_TEMPLATE_FRIENDS
 #  endif
@@ -533,18 +525,28 @@
 //       causes issues with QArrayData and QtPrivate::RefCount - Intel issue ID 6000056211, bug DPD200534796
 //#      define Q_COMPILER_CONSTEXPR
 #      define Q_COMPILER_DELEGATING_CONSTRUCTORS
+#      define Q_COMPILER_EXPLICIT_CONVERSIONS
 #      define Q_COMPILER_EXPLICIT_OVERRIDES
 #      define Q_COMPILER_NONSTATIC_MEMBER_INIT
+#      define Q_COMPILER_RANGE_FOR
 #      define Q_COMPILER_RAW_STRINGS
 #      define Q_COMPILER_REF_QUALIFIERS
 #      define Q_COMPILER_UNRESTRICTED_UNIONS
 #    endif
+#    if __INTEL_COMPILER >= 1500
+#      define Q_COMPILER_ALIGNAS
+#      define Q_COMPILER_ALIGNOF
+#      define Q_COMPILER_INHERITING_CONSTRUCTORS
+#      define Q_COMPILER_THREAD_LOCAL
+#      define Q_COMPILER_UDL
+#    endif
 #  endif
 #endif
 
 #if defined(Q_CC_CLANG) && !defined(Q_CC_INTEL)
 /* General C++ features */
 #  define Q_COMPILER_RESTRICTED_VLA
+#  define Q_COMPILER_THREADSAFE_STATICS
 #  if !__has_feature(cxx_exceptions)
 #    ifndef QT_NO_EXCEPTIONS
 #      define QT_NO_EXCEPTIONS
@@ -671,8 +673,7 @@
 #    endif
 #  endif
 
-/* C++1y features, see http://clang.llvm.org/cxx_status.html and
- * http://clang.llvm.org/docs/LanguageExtensions.html#checks-for-standard-language-features */
+/* C++1y features, deprecated macros. Do not update this list. */
 #  if __cplusplus > 201103L
 //#    if __has_feature(cxx_binary_literals)
 //#      define Q_COMPILER_BINARY_LITERALS  // see above
@@ -696,10 +697,18 @@
 #      define Q_COMPILER_VLA
 #    endif
 #  endif
+
+#  if defined(__has_warning)
+#    if __has_warning("-Wunused-private-field")
+#      define Q_DECL_UNUSED_MEMBER Q_DECL_UNUSED
+#    endif
+#  endif
+
 #endif // Q_CC_CLANG
 
 #if defined(Q_CC_GNU) && !defined(Q_CC_INTEL) && !defined(Q_CC_CLANG)
 #  define Q_COMPILER_RESTRICTED_VLA
+#  define Q_COMPILER_THREADSAFE_STATICS
 #  if (__GNUC__ * 100 + __GNUC_MINOR__) >= 403
 //   GCC supports binary literals in C, C++98 and C++11 modes
 #    define Q_COMPILER_BINARY_LITERALS
@@ -721,11 +730,9 @@
        /* C++11 features supported in GCC 4.4: */
 #      define Q_COMPILER_AUTO_FUNCTION
 #      define Q_COMPILER_AUTO_TYPE
-#      define Q_COMPILER_CLASS_ENUM
 #      define Q_COMPILER_DEFAULT_MEMBERS
 #      define Q_COMPILER_DELETE_MEMBERS
 #      define Q_COMPILER_EXTERN_TEMPLATES
-#      define Q_COMPILER_INITIALIZER_LISTS
 #      define Q_COMPILER_UNIFORM_INIT
 #      define Q_COMPILER_UNICODE_STRINGS
 #      define Q_COMPILER_VARIADIC_TEMPLATES
@@ -733,8 +740,12 @@
 #    if (__GNUC__ * 100 + __GNUC_MINOR__) >= 405
        /* C++11 features supported in GCC 4.5: */
 #      define Q_COMPILER_EXPLICIT_CONVERSIONS
+       /* GCC 4.4 implements initializer_list but does not define typedefs required
+        * by the standard. */
+#      define Q_COMPILER_INITIALIZER_LISTS
 #      define Q_COMPILER_LAMBDA
 #      define Q_COMPILER_RAW_STRINGS
+#      define Q_COMPILER_CLASS_ENUM
 #    endif
 #    if (__GNUC__ * 100 + __GNUC_MINOR__) >= 406
        /* C++11 features supported in GCC 4.6: */
@@ -773,7 +784,7 @@
 #  endif
 #  if __cplusplus > 201103L
 #    if (__GNUC__ * 100 + __GNUC_MINOR__) >= 409
-     /* C++1y features in GCC 4.9 */
+     /* C++1y features in GCC 4.9 - deprecated, do not update this list */
 //#    define Q_COMPILER_BINARY_LITERALS   // already supported since GCC 4.3 as an extension
 #      define Q_COMPILER_LAMBDA_CAPTURES
 #      define Q_COMPILER_RETURN_TYPE_DEDUCTION
@@ -782,6 +793,7 @@
 #endif
 
 #if defined(Q_CC_MSVC) && !defined(Q_CC_INTEL)
+#  if defined(__cplusplus)
 #    if _MSC_VER >= 1400
        /* C++11 features supported in VC8 = VC2005: */
 #      define Q_COMPILER_VARIADIC_MACROS
@@ -804,8 +816,10 @@
        /* C++11 features supported in VC10 = VC2010: */
 #      define Q_COMPILER_AUTO_FUNCTION
 #      define Q_COMPILER_AUTO_TYPE
-#      define Q_COMPILER_LAMBDA
 #      define Q_COMPILER_DECLTYPE
+#      define Q_COMPILER_EXTERN_TEMPLATES
+#      define Q_COMPILER_LAMBDA
+#      define Q_COMPILER_NULLPTR
 #      define Q_COMPILER_RVALUE_REFS
 #      define Q_COMPILER_STATIC_ASSERT
 //  MSVC's library has std::initializer_list, but the compiler does not support the braces initialization
@@ -817,7 +831,6 @@
 #       undef Q_DECL_OVERRIDE               /* undo 2005/2008 settings... */
 #       undef Q_DECL_FINAL                  /* undo 2005/2008 settings... */
 #      define Q_COMPILER_EXPLICIT_OVERRIDES /* ...and use std C++11 now   */
-#      define Q_COMPILER_RANGE_FOR
 #      define Q_COMPILER_CLASS_ENUM
 #      define Q_COMPILER_ATOMICS
 #    endif /* VC 11 */
@@ -840,6 +853,7 @@
 #      define Q_COMPILER_INITIALIZER_LISTS
 #    endif /* VC 12 SP 2 RC */
 
+#  endif /* __cplusplus */
 #endif /* Q_CC_MSVC */
 
 #ifdef __cplusplus
@@ -864,6 +878,13 @@
 #  undef Q_COMPILER_RVALUE_REFS
 #  undef Q_COMPILER_REF_QUALIFIERS
 # endif
+# if defined(Q_COMPILER_THREADSAFE_STATICS) && defined(Q_OS_MAC)
+// Mac OS X: Apple's low-level implementation of the C++ support library
+// (libc++abi.dylib, shared between libstdc++ and libc++) has deadlocks. The
+// C++11 standard requires the deadlocks to be removed, so this will eventually
+// be fixed; for now, let's disable this.
+#  undef Q_COMPILER_THREADSAFE_STATICS
+# endif
 #endif
 
 /*
@@ -976,6 +997,9 @@
 #ifndef Q_DECL_UNUSED
 #  define Q_DECL_UNUSED
 #endif
+#ifndef Q_DECL_UNUSED_MEMBER
+#  define Q_DECL_UNUSED_MEMBER
+#endif
 #ifndef Q_FUNC_INFO
 #  if defined(Q_OS_SOLARIS) || defined(Q_CC_XLC)
 #    define Q_FUNC_INFO __FILE__ "(line number unavailable)"
@@ -989,17 +1013,11 @@
 #ifndef Q_DECL_NS_RETURNS_AUTORELEASED
 #  define Q_DECL_NS_RETURNS_AUTORELEASED
 #endif
-
-/*
-   Workaround for static const members on MSVC++.
-*/
-
-#if defined(Q_CC_MSVC)
-#  define QT_STATIC_CONST static
-#  define QT_STATIC_CONST_IMPL
-#else
-#  define QT_STATIC_CONST static const
-#  define QT_STATIC_CONST_IMPL const
+#ifndef Q_DECL_PURE_FUNCTION
+#  define Q_DECL_PURE_FUNCTION
+#endif
+#ifndef Q_DECL_CONST_FUNCTION
+#  define Q_DECL_CONST_FUNCTION Q_DECL_PURE_FUNCTION
 #endif
 
 /*
@@ -1045,7 +1063,7 @@
 #  undef QT_COMPILER_SUPPORTS_AVX2
 #endif
 #if !defined(Q_PROCESSOR_ARM)
-#  undef QT_COMPILER_SUPPORTS_IWMMXT
+#  undef QT_COMPILER_SUPPORTS_NEON
 #endif
 #if !defined(Q_PROCESSOR_MIPS)
 #  undef QT_COMPILER_SUPPORTS_MIPS_DSP
diff --git a/src/corelib/global/qconfig-dist.h b/src/corelib/global/qconfig-dist.h
index 7b491028df..cb4b9cf376 100644
--- a/src/corelib/global/qconfig-dist.h
+++ b/src/corelib/global/qconfig-dist.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qconfig-large.h b/src/corelib/global/qconfig-large.h
index 0c1fcbf7da..48d2eb6e3c 100644
--- a/src/corelib/global/qconfig-large.h
+++ b/src/corelib/global/qconfig-large.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qconfig-medium.h b/src/corelib/global/qconfig-medium.h
index e5ab33faed..a76c02dcb2 100644
--- a/src/corelib/global/qconfig-medium.h
+++ b/src/corelib/global/qconfig-medium.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qconfig-minimal.h b/src/corelib/global/qconfig-minimal.h
index b27f3271c1..1f96f1060f 100644
--- a/src/corelib/global/qconfig-minimal.h
+++ b/src/corelib/global/qconfig-minimal.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qconfig-nacl.h b/src/corelib/global/qconfig-nacl.h
index 22dd56e772..e231424d83 100644
--- a/src/corelib/global/qconfig-nacl.h
+++ b/src/corelib/global/qconfig-nacl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qconfig-small.h b/src/corelib/global/qconfig-small.h
index 8a0e769383..10643c9bec 100644
--- a/src/corelib/global/qconfig-small.h
+++ b/src/corelib/global/qconfig-small.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qendian.h b/src/corelib/global/qendian.h
index 9b939feea0..136581167c 100644
--- a/src/corelib/global/qendian.h
+++ b/src/corelib/global/qendian.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qflags.h b/src/corelib/global/qflags.h
index bdfc453e08..275ab12800 100644
--- a/src/corelib/global/qflags.h
+++ b/src/corelib/global/qflags.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,6 +39,10 @@
 #include <QtCore/qtypeinfo.h>
 #include <QtCore/qtypetraits.h>
 
+#ifdef Q_COMPILER_INITIALIZER_LISTS
+#include <initializer_list>
+#endif
+
 QT_BEGIN_NAMESPACE
 
 class QFlag
@@ -116,6 +112,11 @@ public:
     Q_DECL_CONSTEXPR inline QFlags(Zero = 0) : i(0) {}
     Q_DECL_CONSTEXPR inline QFlags(QFlag f) : i(f) {}
 
+#ifdef Q_COMPILER_INITIALIZER_LISTS
+    Q_DECL_CONSTEXPR inline QFlags(std::initializer_list<Enum> flags)
+        : i(initializer_list_helper(flags.begin(), flags.end())) {}
+#endif
+
     inline QFlags &operator&=(int mask) { i &= mask; return *this; }
     inline QFlags &operator&=(uint mask) { i &= mask; return *this; }
     inline QFlags &operator&=(Enum mask) { i &= Int(mask); return *this; }
@@ -139,6 +140,14 @@ public:
 
     Q_DECL_CONSTEXPR inline bool testFlag(Enum f) const { return (i & Int(f)) == Int(f) && (Int(f) != 0 || i == Int(f) ); }
 private:
+#ifdef Q_COMPILER_INITIALIZER_LISTS
+    Q_DECL_CONSTEXPR static inline Int initializer_list_helper(typename std::initializer_list<Enum>::const_iterator it,
+                                                               typename std::initializer_list<Enum>::const_iterator end)
+    {
+        return (it == end ? Int(0) : (Int(*it) | initializer_list_helper(it + 1, end)));
+    }
+#endif
+
     Int i;
 };
 
diff --git a/src/corelib/global/qglobal.cpp b/src/corelib/global/qglobal.cpp
index 6b5638d336..2696df9e39 100644
--- a/src/corelib/global/qglobal.cpp
+++ b/src/corelib/global/qglobal.cpp
@@ -1,40 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -80,6 +73,21 @@
 #include <private/qjni_p.h>
 #endif
 
+#if defined(Q_OS_BLACKBERRY)
+#  include <bps/deviceinfo.h>
+#endif
+
+#if defined(Q_OS_SOLARIS)
+#  include <sys/systeminfo.h>
+#endif
+
+#ifdef Q_OS_UNIX
+#include <sys/utsname.h>
+#include <private/qcore_unix_p.h>
+#endif
+
+#include "archdetect.cpp"
+
 QT_BEGIN_NAMESPACE
 
 #if !QT_DEPRECATED_SINCE(5, 0)
@@ -258,6 +266,16 @@ Q_STATIC_ASSERT_X(UCHAR_MAX == 255, "Qt assumes that char is 8 bits");
 */
 
 /*!
+    \fn QFlags::QFlags(std::initializer_list<Enum> flags)
+    \since 5.4
+
+    Constructs a QFlags object initialized with all \a flags
+    combined using the bitwise OR operator.
+
+    \sa operator|=(), operator|()
+*/
+
+/*!
     \fn QFlags &QFlags::operator=(const QFlags &other)
 
     Assigns \a other to this object and returns a reference to this
@@ -568,8 +586,8 @@ Q_STATIC_ASSERT_X(UCHAR_MAX == 255, "Qt assumes that char is 8 bits");
     64-bit integer literals in a platform-independent way. The
     Q_CHECK_PTR() macro prints a warning containing the source code's
     file name and line number, saying that the program ran out of
-    memory, if the pointer is 0. The qPrintable() macro represent an
-    easy way of printing text.
+    memory, if the pointer is 0. The qPrintable() and qUtf8Printable()
+    macros represent an easy way of printing text.
 
     Finally, the QT_POINTER_SIZE macro expands to the size of a
     pointer in bytes, and the QT_VERSION and QT_VERSION_STR macros
@@ -1096,6 +1114,7 @@ bool qSharedBuild() Q_DECL_NOTHROW
     \value MV_10_7     OS X 10.7
     \value MV_10_8     OS X 10.8
     \value MV_10_9     OS X 10.9
+    \value MV_10_10    OS X 10.10
     \value MV_Unknown  An unknown and currently unsupported platform
 
     \value MV_CHEETAH  Apple codename for MV_10_0
@@ -1108,6 +1127,7 @@ bool qSharedBuild() Q_DECL_NOTHROW
     \value MV_LION     Apple codename for MV_10_7
     \value MV_MOUNTAINLION Apple codename for MV_10_8
     \value MV_MAVERICKS    Apple codename for MV_10_9
+    \value MV_YOSEMITE     Apple codename for MV_10_10
 
     \value MV_IOS      iOS (any)
     \value MV_IOS_4_3  iOS 4.3
@@ -1117,6 +1137,7 @@ bool qSharedBuild() Q_DECL_NOTHROW
     \value MV_IOS_6_1  iOS 6.1
     \value MV_IOS_7_0  iOS 7.0
     \value MV_IOS_7_1  iOS 7.1
+    \value MV_IOS_8_0  iOS 8.0
 
     \sa WinVersion
 */
@@ -1500,6 +1521,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     \relates <QtGlobal>
 
     Defined if the application is compiled for Alpha processors.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1509,6 +1532,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for ARM processors. Qt currently
     supports three optional ARM revisions: \l Q_PROCESSOR_ARM_V5, \l
     Q_PROCESSOR_ARM_V6, and \l Q_PROCESSOR_ARM_V7.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_ARM_V5
@@ -1516,6 +1541,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for ARMv5 processors. The \l
     Q_PROCESSOR_ARM macro is also defined when Q_PROCESSOR_ARM_V5 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_ARM_V6
@@ -1524,6 +1551,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for ARMv6 processors. The \l
     Q_PROCESSOR_ARM and \l Q_PROCESSOR_ARM_V5 macros are also defined when
     Q_PROCESSOR_ARM_V6 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_ARM_V7
@@ -1532,6 +1561,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for ARMv7 processors. The \l
     Q_PROCESSOR_ARM, \l Q_PROCESSOR_ARM_V5, and \l Q_PROCESSOR_ARM_V6 macros
     are also defined when Q_PROCESSOR_ARM_V7 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1539,6 +1570,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     \relates <QtGlobal>
 
     Defined if the application is compiled for AVR32 processors.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1546,6 +1579,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     \relates <QtGlobal>
 
     Defined if the application is compiled for Blackfin processors.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1554,6 +1589,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for IA-64 processors. This includes
     all Itanium and Itanium 2 processors.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1564,6 +1601,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     supports seven MIPS revisions: \l Q_PROCESSOR_MIPS_I, \l
     Q_PROCESSOR_MIPS_II, \l Q_PROCESSOR_MIPS_III, \l Q_PROCESSOR_MIPS_IV, \l
     Q_PROCESSOR_MIPS_V, \l Q_PROCESSOR_MIPS_32, and \l Q_PROCESSOR_MIPS_64.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_I
@@ -1571,6 +1610,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for MIPS-I processors. The \l
     Q_PROCESSOR_MIPS macro is also defined when Q_PROCESSOR_MIPS_I is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_II
@@ -1579,6 +1620,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for MIPS-II processors. The \l
     Q_PROCESSOR_MIPS and \l Q_PROCESSOR_MIPS_I macros are also defined when
     Q_PROCESSOR_MIPS_II is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_32
@@ -1587,6 +1630,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for MIPS32 processors. The \l
     Q_PROCESSOR_MIPS, \l Q_PROCESSOR_MIPS_I, and \l Q_PROCESSOR_MIPS_II macros
     are also defined when Q_PROCESSOR_MIPS_32 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_III
@@ -1595,6 +1640,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for MIPS-III processors. The \l
     Q_PROCESSOR_MIPS, \l Q_PROCESSOR_MIPS_I, and \l Q_PROCESSOR_MIPS_II macros
     are also defined when Q_PROCESSOR_MIPS_III is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_IV
@@ -1604,6 +1651,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Q_PROCESSOR_MIPS, \l Q_PROCESSOR_MIPS_I, \l Q_PROCESSOR_MIPS_II, and \l
     Q_PROCESSOR_MIPS_III macros are also defined when Q_PROCESSOR_MIPS_IV is
     defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_V
@@ -1613,6 +1662,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Q_PROCESSOR_MIPS, \l Q_PROCESSOR_MIPS_I, \l Q_PROCESSOR_MIPS_II, \l
     Q_PROCESSOR_MIPS_III, and \l Q_PROCESSOR_MIPS_IV macros are also defined
     when Q_PROCESSOR_MIPS_V is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_MIPS_64
@@ -1622,6 +1673,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Q_PROCESSOR_MIPS, \l Q_PROCESSOR_MIPS_I, \l Q_PROCESSOR_MIPS_II, \l
     Q_PROCESSOR_MIPS_III, \l Q_PROCESSOR_MIPS_IV, and \l Q_PROCESSOR_MIPS_V
     macros are also defined when Q_PROCESSOR_MIPS_64 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1631,6 +1684,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for POWER processors. Qt currently
     supports two Power variants: \l Q_PROCESSOR_POWER_32 and \l
     Q_PROCESSOR_POWER_64.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_POWER_32
@@ -1639,6 +1694,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for 32-bit Power processors. The \l
     Q_PROCESSOR_POWER macro is also defined when Q_PROCESSOR_POWER_32 is
     defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_POWER_64
@@ -1647,6 +1704,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for 64-bit Power processors. The \l
     Q_PROCESSOR_POWER macro is also defined when Q_PROCESSOR_POWER_64 is
     defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1655,6 +1714,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for S/390 processors. Qt supports
     one optional variant of S/390: Q_PROCESSOR_S390_X.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_S390_X
@@ -1662,6 +1723,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for S/390x processors. The \l
     Q_PROCESSOR_S390 macro is also defined when Q_PROCESSOR_S390_X is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1670,6 +1733,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for SuperH processors. Qt currently
     supports one SuperH revision: \l Q_PROCESSOR_SH_4A.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_SH_4A
@@ -1677,6 +1742,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for SuperH 4A processors. The \l
     Q_PROCESSOR_SH macro is also defined when Q_PROCESSOR_SH_4A is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1685,6 +1752,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for SPARC processors. Qt currently
     supports one optional SPARC revision: \l Q_PROCESSOR_SPARC_V9.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_SPARC_V9
@@ -1693,6 +1762,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for SPARC V9 processors. The \l
     Q_PROCESSOR_SPARC macro is also defined when Q_PROCESSOR_SPARC_V9 is
     defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1701,6 +1772,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
 
     Defined if the application is compiled for x86 processors. Qt currently
     supports two x86 variants: \l Q_PROCESSOR_X86_32 and \l Q_PROCESSOR_X86_64.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_X86_32
@@ -1709,6 +1782,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for 32-bit x86 processors. This
     includes all i386, i486, i586, and i686 processors. The \l Q_PROCESSOR_X86
     macro is also defined when Q_PROCESSOR_X86_32 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 /*!
     \macro Q_PROCESSOR_X86_64
@@ -1717,6 +1792,8 @@ bool qSharedBuild() Q_DECL_NOTHROW
     Defined if the application is compiled for 64-bit x86 processors. This
     includes all AMD64, Intel 64, and other x86_64/x64 processors. The \l
     Q_PROCESSOR_X86 macro is also defined when Q_PROCESSOR_X86_64 is defined.
+
+    \sa QSysInfo::buildCpuArchitecture()
 */
 
 /*!
@@ -1838,7 +1915,7 @@ QSysInfo::WinVersion QSysInfo::windowsVersion()
     if (winver)
         return winver;
 #ifdef Q_OS_WINRT
-    winver = QSysInfo::WV_WINDOWS8;
+    winver = QSysInfo::WV_WINDOWS8_1;
 #else
     winver = QSysInfo::WV_NT;
     const OSVERSIONINFO osver = winOsVersion();
@@ -1931,9 +2008,613 @@ QSysInfo::WinVersion QSysInfo::windowsVersion()
     return winver;
 }
 
+static const char *winVer_helper()
+{
+    switch (int(QSysInfo::WindowsVersion)) {
+    case QSysInfo::WV_NT:
+        return "NT";
+    case QSysInfo::WV_2000:
+        return "2000";
+    case QSysInfo::WV_XP:
+        return "XP";
+    case QSysInfo::WV_2003:
+        return "2003";
+    case QSysInfo::WV_VISTA:
+        return "Vista";
+    case QSysInfo::WV_WINDOWS7:
+        return "7";
+    case QSysInfo::WV_WINDOWS8:
+        return "8";
+    case QSysInfo::WV_WINDOWS8_1:
+        return "8.1";
+
+    case QSysInfo::WV_CE:
+        return "CE";
+    case QSysInfo::WV_CENET:
+        return "CENET";
+    case QSysInfo::WV_CE_5:
+        return "CE5";
+    case QSysInfo::WV_CE_6:
+        return "CE6";
+    }
+    // unknown, future version
+    return 0;
+}
+
 const QSysInfo::WinVersion QSysInfo::WindowsVersion = QSysInfo::windowsVersion();
 
 #endif
+#if defined(Q_OS_UNIX)
+#  if (defined(Q_OS_LINUX) && !defined(Q_OS_ANDROID)) || defined(Q_OS_FREEBSD)
+#    define USE_ETC_OS_RELEASE
+struct QUnixOSVersion
+{
+    // from /etc/os-release
+    QString productType;            // $ID
+    QString productVersion;         // $VERSION_ID
+    QString prettyName;             // $PRETTY_NAME
+};
+
+static QString unquote(const char *begin, const char *end)
+{
+    if (*begin == '"') {
+        Q_ASSERT(end[-1] == '"');
+        return QString::fromLatin1(begin + 1, end - begin - 2);
+    }
+    return QString::fromLatin1(begin, end - begin);
+}
+
+static bool readEtcOsRelease(QUnixOSVersion &v)
+{
+    // we're avoiding QFile here
+    int fd = qt_safe_open("/etc/os-release", O_RDONLY);
+    if (fd == -1)
+        return false;
+
+    QT_STATBUF sbuf;
+    if (QT_FSTAT(fd, &sbuf) == -1) {
+        qt_safe_close(fd);
+        return false;
+    }
+
+    QByteArray buffer(sbuf.st_size, Qt::Uninitialized);
+    buffer.resize(qt_safe_read(fd, buffer.data(), sbuf.st_size));
+    qt_safe_close(fd);
+
+    const char *ptr = buffer.constData();
+    const char *end = buffer.constEnd();
+    const char *eol;
+    for ( ; ptr != end; ptr = eol + 1) {
+        static const char idString[] = "ID=";
+        static const char prettyNameString[] = "PRETTY_NAME=";
+        static const char versionIdString[] = "VERSION_ID=";
+
+        // find the end of the line after ptr
+        eol = static_cast<const char *>(memchr(ptr, '\n', end - ptr));
+        if (!eol)
+            eol = end - 1;
+
+        // note: we're doing a binary search here, so comparison
+        // must always be sorted
+        int cmp = strncmp(ptr, idString, strlen(idString));
+        if (cmp < 0)
+            continue;
+        if (cmp == 0) {
+            ptr += strlen(idString);
+            v.productType = unquote(ptr, eol);
+            continue;
+        }
+
+        cmp = strncmp(ptr, prettyNameString, strlen(prettyNameString));
+        if (cmp < 0)
+            continue;
+        if (cmp == 0) {
+            ptr += strlen(prettyNameString);
+            v.prettyName = unquote(ptr, eol);
+            continue;
+        }
+
+        cmp = strncmp(ptr, versionIdString, strlen(versionIdString));
+        if (cmp < 0)
+            continue;
+        if (cmp == 0) {
+            ptr += strlen(versionIdString);
+            v.productVersion = unquote(ptr, eol);
+            continue;
+        }
+    }
+
+    return true;
+}
+#  endif // USE_ETC_OS_RELEASE
+#endif // Q_OS_UNIX
+
+
+/*!
+    \since 5.4
+
+    Returns the architecture of the CPU that Qt was compiled for, in text
+    format. Note that this may not match the actual CPU that the application is
+    running on if there's an emulation layer or if the CPU supports multiple
+    architectures (like x86-64 processors supporting i386 applications). To
+    detect that, use currentCpuArchitecture().
+
+    Values returned by this function are stable and will not change over time,
+    so applications can rely on the returned value as an identifier, except
+    that new CPU types may be added over time.
+
+    Typical returned values are (note: list not exhaustive):
+    \list
+        \li "arm"
+        \li "arm64"
+        \li "i386"
+        \li "ia64"
+        \li "mips"
+        \li "mips64"
+        \li "power"
+        \li "power64"
+        \li "sparc"
+        \li "sparcv9"
+        \li "x86_64"
+    \endlist
+
+    \sa QSysInfo::buildAbi(), QSysInfo::currentCpuArchitecture()
+*/
+QString QSysInfo::buildCpuArchitecture()
+{
+    return QStringLiteral(ARCH_PROCESSOR);
+}
+
+/*!
+    \since 5.4
+
+    Returns the architecture of the CPU that the application is running on, in
+    text format. Note that this function depends on what the OS will report and
+    may not detect the actual CPU architecture if the OS hides that information
+    or is unable to provide it. For example, a 32-bit OS running on a 64-bit
+    CPU is usually unable to determine the CPU is actually capable of running
+    64-bit programs.
+
+    Values returned by this function are mostly stable: an attempt will be made
+    to ensure that they stay constant over time and match the values returned
+    by QSysInfo::builldCpuArchitecture(). However, due to the nature of the
+    operating system functions being used, there may be discrepancies.
+
+    Typical returned values are (note: list not exhaustive):
+    \list
+        \li "arm"
+        \li "arm64"
+        \li "i386"
+        \li "ia64"
+        \li "mips"
+        \li "mips64"
+        \li "power"
+        \li "power64"
+        \li "sparc"
+        \li "sparcv9"
+        \li "x86_64"
+    \endlist
+
+    \sa QSysInfo::buildAbi(), QSysInfo::buildCpuArchitecture()
+ */
+QString QSysInfo::currentCpuArchitecture()
+{
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINCE)
+    // We don't need to catch all the CPU architectures in this function;
+    // only those where the host CPU might be different than the build target
+    // (usually, 64-bit platforms).
+    SYSTEM_INFO info;
+    GetNativeSystemInfo(&info);
+    switch (info.wProcessorArchitecture) {
+#  ifdef PROCESSOR_ARCHITECTURE_AMD64
+    case PROCESSOR_ARCHITECTURE_AMD64:
+        return QStringLiteral("x86_64");
+#  endif
+#  ifdef PROCESSOR_ARCHITECTURE_IA32_ON_WIN64
+    case PROCESSOR_ARCHITECTURE_IA32_ON_WIN64:
+#  endif
+    case PROCESSOR_ARCHITECTURE_IA64:
+        return QStringLiteral("ia64");
+    }
+#elif defined(Q_OS_UNIX)
+    long ret = -1;
+    struct utsname u;
+
+#  if defined(Q_OS_SOLARIS)
+    // We need a special call for Solaris because uname(2) on x86 returns "i86pc" for
+    // both 32- and 64-bit CPUs. Reference:
+    // http://docs.oracle.com/cd/E18752_01/html/816-5167/sysinfo-2.html#REFMAN2sysinfo-2
+    // http://fxr.watson.org/fxr/source/common/syscall/systeminfo.c?v=OPENSOLARIS
+    // http://fxr.watson.org/fxr/source/common/conf/param.c?v=OPENSOLARIS;im=10#L530
+    if (ret == -1)
+        ret = sysinfo(SI_ARCHITECTURE_64, u.machine, sizeof u.machine);
+#  endif
+
+    if (ret == -1)
+        ret = uname(&u);
+
+    // we could use detectUnixVersion() above, but we only need a field no other function does
+    if (ret != -1) {
+        // the use of QT_BUILD_INTERNAL here is simply to ensure all branches build
+        // as we don't often build on some of the less common platforms
+#  if defined(Q_PROCESSOR_ARM) || defined(QT_BUILD_INTERNAL)
+        if (strcmp(u.machine, "aarch64") == 0)
+            return QStringLiteral("arm64");
+        if (strncmp(u.machine, "armv", 4) == 0)
+            return QStringLiteral("arm");
+#  endif
+#  if defined(Q_PROCESSOR_POWER) || defined(QT_BUILD_INTERNAL)
+        // harmonize "powerpc" and "ppc" to "power"
+        if (strncmp(u.machine, "ppc", 3) == 0)
+            return QLatin1String("power") + QLatin1String(u.machine + 3);
+        if (strncmp(u.machine, "powerpc", 7) == 0)
+            return QLatin1String("power") + QLatin1String(u.machine + 7);
+        if (strcmp(u.machine, "Power Macintosh") == 0)
+            return QLatin1String("power");
+#  endif
+#  if defined(Q_PROCESSOR_SPARC) || defined(QT_BUILD_INTERNAL)
+        // Solaris sysinfo(2) (above) uses "sparcv9", but uname -m says "sun4u";
+        // Linux says "sparc64"
+        if (strcmp(u.machine, "sun4u") == 0 || strcmp(u.machine, "sparc64") == 0)
+            return QStringLiteral("sparcv9");
+        if (strcmp(u.machine, "sparc32") == 0)
+            return QStringLiteral("sparc");
+#  endif
+#  if defined(Q_PROCESSOR_X86) || defined(QT_BUILD_INTERNAL)
+        // harmonize all "i?86" to "i386"
+        if (strlen(u.machine) == 4 && u.machine[0] == 'i'
+                && u.machine[2] == '8' && u.machine[3] == '6')
+            return QStringLiteral("i386");
+        if (strcmp(u.machine, "amd64") == 0) // Solaris
+            return QStringLiteral("x86_64");
+#  endif
+        return QString::fromLatin1(u.machine);
+    }
+#endif
+    return buildCpuArchitecture();
+}
+
+/*!
+    \since 5.4
+
+    Returns the full architecture string that Qt was compiled for. This string
+    is useful for identifying different, incompatible builds. For example, it
+    can be used as an identifier to request an upgrade package from a server.
+
+    The values returned from this function are kept stable as follows: the
+    mandatory components of the result will not change in future versions of
+    Qt, but optional suffixes may be added.
+
+    The returned value is composed of three or more parts, separated by dashes
+    ("-"). They are:
+
+    \table
+    \header \li Component           \li Value
+    \row    \li CPU Architecture    \li The same as QSysInfo::buildCpuArchitecture(), such as "arm", "i386", "mips" or "x86_64"
+    \row    \li Endianness          \li "little_endian" or "big_endian"
+    \row    \li Word size           \li Whether it's a 32- or 64-bit application. Possible values are:
+                                        "llp64" (Windows 64-bit), "lp64" (Unix 64-bit), "ilp32" (32-bit)
+    \row    \li (Optional) ABI      \li Zero or more components identifying different ABIs possible in this architecture.
+                                        Currently, Qt has optional ABI components for ARM and MIPS processors: one
+                                        component is the main ABI (such as "eabi", "o32", "n32", "o64"); another is
+                                        whether the calling convention is using hardware floating point registers ("hardfloat"
+                                        is present).
+
+                                        Additionally, if Qt was configured with \c{-qreal float}, the ABI option tag "qreal_float"
+                                        will be present. If Qt was configured with another type as qreal, that type is present after
+                                        "qreal_", with all characters other than letters and digits escaped by an underscore, followed
+                                        by two hex digits. For example, \c{-qreal long double} becomes "qreal_long_20double".
+    \endtable
+
+    \sa QSysInfo::buildCpuArchitecture()
+*/
+QString QSysInfo::buildAbi()
+{
+#ifdef Q_COMPILER_UNICODE_STRINGS
+    // ARCH_FULL is a concatenation of strings (incl. ARCH_PROCESSOR), which breaks
+    // QStringLiteral on MSVC. Since the concatenation behavior we want is specified
+    // the same C++11 paper as the Unicode strings, we'll use that macro and hope
+    // that Microsoft implements the new behavior when they add support for Unicode strings.
+    return QStringLiteral(ARCH_FULL);
+#else
+    return QLatin1String(ARCH_FULL);
+#endif
+}
+
+static QString unknownText()
+{
+    return QStringLiteral("unknown");
+}
+
+/*!
+    \since 5.4
+
+    Returns the type of the operating system kernel Qt was compiled for. It's
+    also the kernel the application is running on, unless the host operating
+    system is running a form of compatibility or virtualization layer.
+
+    Values returned by this function are stable and will not change over time,
+    so applications can rely on the returned value as an identifier, except
+    that new OS kernel types may be added over time.
+
+    On Windows, this function returns the type of Windows kernel, like "wince"
+    or "winnt". On Unix systems, it returns the same as the output of \c{uname
+    -s} (lowercased).
+
+    Note that this function may return surprising values: it returns "linux"
+    for all operating systems running Linux (including Android), "qnx" for all
+    operating systems running QNX (including BlackBerry 10), "freebsd" for
+    Debian/kFreeBSD, and "darwin" for OS X and iOS. For information on the type
+    of product the application is running on, see productType().
+
+    \sa QFileSelector, kernelVersion(), productType(), productVersion(), prettyProductName()
+*/
+QString QSysInfo::kernelType()
+{
+#if defined(Q_OS_WINCE)
+    return QStringLiteral("wince");
+#elif defined(Q_OS_WIN)
+    return QStringLiteral("winnt");
+#elif defined(Q_OS_UNIX)
+    struct utsname u;
+    if (uname(&u) == 0)
+        return QString::fromLatin1(u.sysname).toLower();
+#endif
+    return unknownText();
+}
+
+/*!
+    \since 5.4
+
+    Returns the release version of the operating system kernel. On Windows, it
+    returns the version of the NT or CE kernel. On Unix systems, including
+    Android, BlackBerry and OS X, it returns the same as the \c{uname -r}
+    command would return.
+
+    If the version could not be determined, this function may return an empty
+    string.
+
+    \sa kernelType(), productType(), productVersion(), prettyProductName()
+*/
+QString QSysInfo::kernelVersion()
+{
+#ifdef Q_OS_WINRT
+    // TBD
+    return QString();
+#elif defined(Q_OS_WIN)
+    const OSVERSIONINFO osver = winOsVersion();
+    return QString::number(int(osver.dwMajorVersion)) + QLatin1Char('.') + QString::number(int(osver.dwMinorVersion))
+            + QLatin1Char('.') + QString::number(int(osver.dwBuildNumber));
+#else
+    struct utsname u;
+    if (uname(&u) == 0)
+        return QString::fromLatin1(u.release);
+    return QString();
+#endif
+}
+
+
+/*!
+    \since 5.4
+
+    Returns the product name of the operating system this application is
+    running in. If the application is running on some sort of emulation or
+    virtualization layer (such as WINE on a Unix system), this function will
+    inspect the emulation / virtualization layer.
+
+    Values returned by this function are stable and will not change over time,
+    so applications can rely on the returned value as an identifier, except
+    that new OS types may be added over time.
+
+    \b{Linux and Android note}: this function returns "android" for Linux
+    systems running Android userspace, notably when using the Bionic library.
+    For all other Linux systems, regardless of C library being used, it tries
+    to determine the distribution name and returns that. If determining the
+    distribution name failed, it returns "unknown".
+
+    \b{BlackBerry note}: this function returns "blackberry" for QNX systems
+    running the BlackBerry userspace, but "qnx" for all other QNX-based
+    systems.
+
+    \b{Darwin, OS X and iOS note}: this function returns "osx" for OS X
+    systems, "ios" for iOS systems and "darwin" in case the system could not be
+    determined.
+
+    \b{FreeBSD note}: this function returns "debian" for Debian/kFreeBSD and
+    "unknown" otherwise.
+
+    \b{Windows note}: this function returns "winphone" for builds for Windows
+    Phone, "winrt" for WinRT builds, "wince" for Windows CE and Embedded
+    Compact builds, and "windows" for normal desktop builds.
+
+    For other Unix-type systems, this function usually returns "unknown".
+
+    \sa QFileSelector, kernelType(), kernelVersion(), productVersion(), prettyProductName()
+*/
+QString QSysInfo::productType()
+{
+    // similar, but not identical to QFileSelectorPrivate::platformSelectors
+#if defined(Q_OS_WINPHONE)
+    return QStringLiteral("winphone");
+#elif defined(Q_OS_WINRT)
+    return QStringLiteral("winrt");
+#elif defined(Q_OS_WINCE)
+    return QStringLiteral("wince");
+#elif defined(Q_OS_WIN)
+    return QStringLiteral("windows");
+
+#elif defined(Q_OS_BLACKBERRY)
+    return QStringLiteral("blackberry");
+#elif defined(Q_OS_QNX)
+    return QStringLiteral("qnx");
+
+#elif defined(Q_OS_ANDROID)
+    return QStringLiteral("android");
+
+#elif defined(Q_OS_IOS)
+    return QStringLiteral("ios");
+#elif defined(Q_OS_OSX)
+    return QStringLiteral("osx");
+#elif defined(Q_OS_DARWIN)
+    return QStringLiteral("darwin");
+
+#elif defined(USE_ETC_OS_RELEASE) // Q_OS_UNIX
+    QUnixOSVersion unixOsVersion;
+    readEtcOsRelease(unixOsVersion);
+    if (!unixOsVersion.productType.isEmpty())
+        return unixOsVersion.productType;
+#endif
+    return unknownText();
+}
+
+/*!
+    \since 5.4
+
+    Returns the product version of the operating system in string form. If the
+    version could not be determined, this function returns "unknown".
+
+    It will return the Android, BlackBerry, iOS, OS X, Windows full-product
+    versions on those systems. In particular, on OS X, iOS and Windows, the
+    returned string is similar to the macVersion() or windowsVersion() enums.
+
+    On Linux systems, it will try to determine the distribution version and will
+    return that. This is also done on Debian/kFreeBSD, so this function will
+    return Debian version in that case.
+
+    In all other Unix-type systems, this function always returns "unknown".
+
+    \note The version string returned from this function is only guaranteed to
+    be orderable on Android, BlackBerry, OS X and iOS. On Windows, some Windows
+    versions are text ("XP" and "Vista", for example). On Linux, the version of
+    the distribution may jump unexpectedly, please refer to the distribution's
+    documentation for versioning practices.
+
+    \sa kernelType(), kernelVersion(), productType(), prettyProductName()
+*/
+QString QSysInfo::productVersion()
+{
+#if defined(Q_OS_IOS)
+    int major = (int(MacintoshVersion) >> 4) & 0xf;
+    int minor = int(MacintoshVersion) & 0xf;
+    if (Q_LIKELY(major < 10 && minor < 10)) {
+        char buf[4] = { char(major + '0'), '.', char(minor + '0'), '\0' };
+        return QString::fromLatin1(buf, 3);
+    }
+    return QString::number(major) + QLatin1Char('.') + QString::number(minor);
+#elif defined(Q_OS_OSX)
+    int minor = int(MacintoshVersion) - 2;  // we're not running on Mac OS 9
+    Q_ASSERT(minor < 100);
+    char buf[] = "10.0\0";
+    if (Q_LIKELY(minor < 10)) {
+        buf[3] += minor;
+    } else {
+        buf[3] += minor / 10;
+        buf[4] = '0' + minor % 10;
+    }
+    return QString::fromLatin1(buf);
+#elif defined(Q_OS_WIN)
+    const char *version = winVer_helper();
+    if (version)
+        return QString::fromLatin1(version).toLower();
+    // fall through
+
+// Android and Blackberry should not fall through to the Unix code
+#elif defined(Q_OS_ANDROID)
+    // TBD
+#elif defined(Q_OS_BLACKBERRY)
+    deviceinfo_details_t *deviceInfo;
+    if (deviceinfo_get_details(&deviceInfo) == BPS_SUCCESS) {
+        QString bbVersion = QString::fromLatin1(deviceinfo_details_get_device_os_version(deviceInfo));
+        deviceinfo_free_details(&deviceInfo);
+        return bbVersion;
+    }
+#elif defined(USE_ETC_OS_RELEASE) // Q_OS_UNIX
+    QUnixOSVersion unixOsVersion;
+    readEtcOsRelease(unixOsVersion);
+    if (!unixOsVersion.productVersion.isEmpty())
+        return unixOsVersion.productVersion;
+#endif
+
+    // fallback
+    return unknownText();
+}
+
+/*!
+    \since 5.4
+
+    Returns a prettier form of productType() and productVersion(), containing
+    other tokens like the operating system type, codenames and other
+    information. The result of this function is suitable for displaying to the
+    user, but not for long-term storage, as the string may change with updates
+    to Qt.
+
+    If productType() is "unknown", this function will instead use the
+    kernelType() and kernelVersion() functions.
+
+    \sa kernelType(), kernelVersion(), productType(), productVersion()
+*/
+QString QSysInfo::prettyProductName()
+{
+#if defined(Q_OS_IOS)
+    return QLatin1String("iOS ") + productVersion();
+#elif defined(Q_OS_OSX)
+    // get the known codenames
+    const char *basename = 0;
+    switch (int(MacintoshVersion)) {
+    case MV_CHEETAH:
+    case MV_PUMA:
+    case MV_JAGUAR:
+    case MV_PANTHER:
+    case MV_TIGER:
+        // This version of Qt does not run on those versions of OS X
+        // so this case label will never be reached
+        Q_UNREACHABLE();
+        break;
+    case MV_LEOPARD:
+        basename = "Mac OS X Leopard (";
+        break;
+    case MV_SNOWLEOPARD:
+        basename = "Mac OS X Snow Leopard (";
+        break;
+    case MV_LION:
+        basename = "Mac OS X Lion (";
+        break;
+    case MV_MOUNTAINLION:
+        basename = "OS X Mountain Lion (";
+        break;
+    case MV_MAVERICKS:
+        basename = "OS X Mavericks (";
+        break;
+    case MV_YOSEMITE:
+        basename = "OS X Yosemite (";
+        break;
+    }
+    if (basename)
+        return QLatin1String(basename) + productVersion() + QLatin1Char(')');
+
+    // a future version of OS X
+    return QLatin1String("OS X ") + productVersion();
+#elif defined(Q_OS_WINPHONE)
+    return QLatin1String("Windows Phone ") + QLatin1String(winVer_helper());
+#elif defined(Q_OS_WIN)
+    return QLatin1String("Windows ") + QLatin1String(winVer_helper());
+#elif defined(Q_OS_ANDROID)
+    return QLatin1String("Android ") + productVersion();
+#elif defined(Q_OS_BLACKBERRY)
+    return QLatin1String("BlackBerry ") + productVersion();
+#elif defined(Q_OS_UNIX)
+#  ifdef USE_ETC_OS_RELEASE
+    QUnixOSVersion unixOsVersion;
+    readEtcOsRelease(unixOsVersion);
+    if (!unixOsVersion.prettyName.isEmpty())
+        return unixOsVersion.prettyName;
+#  endif
+    struct utsname u;
+    if (uname(&u) == 0)
+        return QString::fromLatin1(u.sysname) + QLatin1Char(' ') + QString::fromLatin1(u.release);
+#endif
+    return unknownText();
+}
 
 /*!
     \macro void Q_ASSERT(bool test)
@@ -2815,17 +3496,31 @@ int qrand()
     qPrintable() is used. This is because the array returned by
     QString::toLocal8Bit() will fall out of scope.
 
+    \note qDebug(), qWarning(), qCritical(), qFatal() expect %s
+    arguments to be UTF-8 encoded, while qPrintable() converts to
+    local 8-bit encoding. Therefore qUtf8Printable() should be used
+    for logging strings instead of qPrintable().
+
+    \sa qUtf8Printable()
+*/
+
+/*!
+    \macro const char *qUtf8Printable(const QString &str)
+    \relates <QtGlobal>
+    \since 5.4
+
+    Returns \a str as a \c{const char *}. This is equivalent to
+    \a{str}.toUtf8().constData().
+
+    The char pointer will be invalid after the statement in which
+    qUtf8Printable() is used. This is because the array returned by
+    QString::toUtf8() will fall out of scope.
+
     Example:
 
     \snippet code/src_corelib_global_qglobal.cpp 37
 
-    \note qDebug(), qWarning(), qCritical(), qFatal() expect %s
-    arguments to be UTF-8 encoded, while qPrintable() converts to
-    local 8-bit encoding. Therefore using qPrintable for logging
-    strings is only safe if the argument contains only ASCII
-    characters.
-
-    \sa qDebug(), qWarning(), qCritical(), qFatal()
+    \sa qPrintable(), qDebug(), qWarning(), qCritical(), qFatal()
 */
 
 /*!
@@ -3534,7 +4229,7 @@ bool QInternal::activateCallbacks(Callback cb, void **parameters)
     \relates <QtGlobal>
 
     Forward-declares a mutable Core Foundation \a type. This includes the actual
-    type and the ref type. For example, Q_FORWARD_DECLARE_CF_TYPE(CFString)
+    type and the ref type. For example, Q_FORWARD_DECLARE_MUTABLE_CF_TYPE(CFMutableString)
     declares __CFMutableString and CFMutableStringRef.
 */
 
diff --git a/src/corelib/global/qglobal.h b/src/corelib/global/qglobal.h
index c159ea172d..8bc489e509 100644
--- a/src/corelib/global/qglobal.h
+++ b/src/corelib/global/qglobal.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 Intel Corporation.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,11 +37,11 @@
 
 #include <stddef.h>
 
-#define QT_VERSION_STR   "5.3.3"
+#define QT_VERSION_STR   "5.4.0"
 /*
    QT_VERSION is (major << 16) + (minor << 8) + patch.
 */
-#define QT_VERSION 0x050303
+#define QT_VERSION 0x050400
 /*
    can be used like #if (QT_VERSION >= QT_VERSION_CHECK(4, 4, 0))
 */
@@ -649,6 +641,10 @@ inline void qUnused(T &x) { (void)x; }
 #  define qPrintable(string) QString(string).toLocal8Bit().constData()
 #endif
 
+#ifndef qUtf8Printable
+#  define qUtf8Printable(string) QString(string).toUtf8().constData()
+#endif
+
 class QString;
 Q_CORE_EXPORT QString qt_error_string(int errorCode = -1);
 
@@ -865,22 +861,42 @@ Q_CORE_EXPORT void qFreeAligned(void *ptr);
 #  endif
 #endif
 
-#if defined(Q_CC_GNU) && !defined(Q_CC_INTEL) && !defined(Q_CC_RVCT)
-/* make use of typeof-extension */
+#if defined(Q_COMPILER_DECLTYPE) || (defined(Q_CC_GNU) && !defined(Q_CC_RVCT))
+/* make use of decltype or GCC's __typeof__ extension */
 template <typename T>
 class QForeachContainer {
 public:
-    inline QForeachContainer(const T& t) : c(t), brk(0), i(c.begin()), e(c.end()) { }
+    inline QForeachContainer(const T& t) : c(t), i(c.begin()), e(c.end()), control(1) { }
     const T c;
-    int brk;
     typename T::const_iterator i, e;
+    int control;
 };
 
-#define Q_FOREACH(variable, container)                                \
-for (QForeachContainer<__typeof__((container))> _container_((container)); \
-     !_container_.brk && _container_.i != _container_.e;              \
-     __extension__  ({ ++_container_.brk; ++_container_.i; }))                       \
-    for (variable = *_container_.i;; __extension__ ({--_container_.brk; break;}))
+// We need to use __typeof__ if we don't have decltype or if the compiler
+// hasn't been updated to the fix of Core Language Defect Report 382
+// (http://www.open-std.org/jtc1/sc22/wg21/docs/cwg_defects.html#382).
+// GCC 4.3 and 4.4 have support for decltype, but are affected by DR 382.
+#  if defined(Q_COMPILER_DECLTYPE) && \
+    (defined(Q_CC_CLANG) || defined(Q_CC_INTEL) || !defined(Q_CC_GNU) || (__GNUC__ * 100 + __GNUC_MINOR__) >= 405)
+#    define QT_FOREACH_DECLTYPE(x) typename QtPrivate::remove_reference<decltype(x)>::type
+#  else
+#    define QT_FOREACH_DECLTYPE(x) __typeof__((x))
+#  endif
+
+// Explanation of the control word:
+//  - it's initialized to 1
+//  - that means both the inner and outer loops start
+//  - if there were no breaks, at the end of the inner loop, it's set to 0, which
+//    causes it to exit (the inner loop is run exactly once)
+//  - at the end of the outer loop, it's inverted, so it becomes 1 again, allowing
+//    the outer loop to continue executing
+//  - if there was a break inside the inner loop, it will exit with control still
+//    set to 1; in that case, the outer loop will invert it to 0 and will exit too
+#  define Q_FOREACH(variable, container)                                \
+for (QForeachContainer<QT_FOREACH_DECLTYPE(container)> _container_((container)); \
+     _container_.control && _container_.i != _container_.e;         \
+     ++_container_.i, _container_.control ^= 1)                     \
+    for (variable = *_container_.i; _container_.control; _container_.control = 0)
 
 #else
 
diff --git a/src/corelib/global/qglobalstatic.cpp b/src/corelib/global/qglobalstatic.cpp
index 35069f5a21..3f7aea60b8 100644
--- a/src/corelib/global/qglobalstatic.cpp
+++ b/src/corelib/global/qglobalstatic.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -92,7 +84,7 @@
     whether the type has already been destroyed, to avoid the
     use-after-destruction problem (see QGlobalStatic::isDestroyed()).
 
-    \section1 Constructor and destructor
+    \section1 Constructor and Destructor
 
     For Q_GLOBAL_STATIC, the type \c Type must be publicly
     default-constructible and publicly destructible. For
@@ -164,7 +156,7 @@
 
     This macro will work, but it will add unnecessary overhead.
 
-    \section1 Reentrancy, thread-safety, deadlocks, and exception-safety on construction
+    \section1 Reentrancy, Thread-safety, Deadlocks, and Exception-safety on Construction
 
     The Q_GLOBAL_STATIC macro creates an object that initializes itself on
     first use in a thread-safe manner: if multiple threads attempt to
@@ -232,7 +224,7 @@
         \li the object was always created on the heap.
     \endlist
 
-    \section1 Implementation details
+    \section1 Implementation Details
 
     Q_GLOBAL_STATIC is implemented by creating a QBasicAtomicInt called the \c
     guard and a free, inline function called \c innerFunction. The guard
diff --git a/src/corelib/global/qglobalstatic.h b/src/corelib/global/qglobalstatic.h
index 1c44569dbd..63a213ac00 100644
--- a/src/corelib/global/qglobalstatic.h
+++ b/src/corelib/global/qglobalstatic.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,7 +49,7 @@ enum GuardValues {
 };
 }
 
-#if defined(QT_NO_THREAD) || (defined(Q_CC_GNU) && !defined(Q_OS_MAC))
+#if defined(QT_NO_THREAD) || defined(Q_COMPILER_THREADSAFE_STATICS)
 // some compilers support thread-safe statics
 // The IA-64 C++ ABI requires this, so we know that all GCC versions since 3.4
 // support it. C++11 also requires this behavior.
diff --git a/src/corelib/global/qhooks.cpp b/src/corelib/global/qhooks.cpp
new file mode 100644
index 0000000000..7638414cf1
--- /dev/null
+++ b/src/corelib/global/qhooks.cpp
@@ -0,0 +1,61 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Volker Krause <volker.krause@kdab.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qhooks_p.h"
+
+QT_BEGIN_NAMESPACE
+
+// Only add to the end, and bump version if you do.
+quintptr Q_CORE_EXPORT qtHookData[] = {
+    1, // hook data version
+    QHooks::LastHookIndex, // size of qtHookData
+    QT_VERSION,
+
+    // AddQObject, void(*)(QObject*), called for every constructed QObject
+    // Note: this is called from the QObject constructor, ie. the sub-class
+    // constructors haven't run yet.
+    0,
+
+    // RemoveQObject, void(*)(QObject*), called for every destructed QObject
+    // Note: this is called from the QObject destructor, ie. the object
+    // you get as an argument is already largely invalid.
+    0,
+
+    // Startup, void(*)(), called once QCoreApplication is operational
+    0
+};
+
+Q_STATIC_ASSERT(QHooks::LastHookIndex == sizeof(qtHookData) / sizeof(qtHookData[0]));
+
+QT_END_NAMESPACE
+
diff --git a/src/corelib/global/qhooks_p.h b/src/corelib/global/qhooks_p.h
new file mode 100644
index 0000000000..a88a893c5f
--- /dev/null
+++ b/src/corelib/global/qhooks_p.h
@@ -0,0 +1,66 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Volker Krause <volker.krause@kdab.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+#ifndef QHOOKS_H
+#define QHOOKS_H
+
+#include <QtCore/qglobal.h>
+
+QT_BEGIN_NAMESPACE
+
+class QObject;
+
+namespace QHooks {
+
+enum HookIndex {
+    HookDataVersion = 0,
+    HookDataSize = 1,
+    QtVersion = 2,
+    AddQObject = 3,
+    RemoveQObject = 4,
+    Startup = 5,
+    LastHookIndex
+};
+
+typedef void(*AddQObjectCallback)(QObject*);
+typedef void(*RemoveQObjectCallback)(QObject*);
+typedef void(*StartupCallback)();
+
+}
+
+extern quintptr Q_CORE_EXPORT qtHookData[];
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/corelib/global/qisenum.h b/src/corelib/global/qisenum.h
index 577007b455..53ccd418a4 100644
--- a/src/corelib/global/qisenum.h
+++ b/src/corelib/global/qisenum.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qlibraryinfo.cpp b/src/corelib/global/qlibraryinfo.cpp
index 174c1d0d8d..c3ec2bc7f6 100644
--- a/src/corelib/global/qlibraryinfo.cpp
+++ b/src/corelib/global/qlibraryinfo.cpp
@@ -1,40 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,6 +60,7 @@ QString qt_libraryInfoFile()
 #endif
 
 #include "qconfig.cpp"
+#include "archdetect.cpp"
 
 QT_BEGIN_NAMESPACE
 
@@ -255,7 +249,37 @@ QLibraryInfo::buildDate()
 }
 #endif //QT_NO_DATESTRING
 
-#if defined(Q_CC_CLANG) // must be before GNU, because clang claims to be GNU too
+#if defined(Q_CC_INTEL) // must be before GNU, Clang and MSVC because ICC/ICL claim to be them
+#  ifdef __INTEL_CLANG_COMPILER
+#    define ICC_COMPAT "Clang"
+#  elif defined(__INTEL_MS_COMPAT_LEVEL)
+#    define ICC_COMPAT "Microsoft"
+#  elif defined(__GNUC__)
+#    define ICC_COMPAT "GCC"
+#  else
+#    define ICC_COMPAT "no"
+#  endif
+#  if __INTEL_COMPILER == 1300
+#    define ICC_VERSION "13.0"
+#  elif __INTEL_COMPILER == 1310
+#    define ICC_VERSION "13.1"
+#  elif __INTEL_COMPILER == 1400
+#    define ICC_VERSION "14.0"
+#  elif __INTEL_COMPILER == 1500
+#    define ICC_VERSION "15.0"
+#  else
+#    define ICC_VERSION QT_STRINGIFY(__INTEL_COMPILER)
+#  endif
+#  ifdef __INTEL_COMPILER_UPDATE
+#    define COMPILER_STRING "Intel(R) C++ " ICC_VERSION "." QT_STRINGIFY(__INTEL_COMPILER_UPDATE) \
+                            " build " QT_STRINGIFY(__INTEL_COMPILER_BUILD_DATE) " [" \
+                            ICC_COMPAT " compatibility]"
+#  else
+#    define COMPILER_STRING "Intel(R) C++ " ICC_VERSION \
+                            " build " QT_STRINGIFY(__INTEL_COMPILER_BUILD_DATE) " [" \
+                            ICC_COMPAT " compatibility]"
+#  endif
+#elif defined(Q_CC_CLANG) // must be before GNU, because clang claims to be GNU too
 #  ifdef __apple_build_version__ // Apple clang has other version numbers
 #    define COMPILER_STRING "Clang " __clang_version__ " (Apple)"
 #  else
@@ -273,11 +297,22 @@ QLibraryInfo::buildDate()
 #  elif _MSC_VER < 1900
 #    define COMPILER_STRING "MSVC 2013"
 #  else
-#    define COMPILER_STRING "MSVC <unknown version>"
+#    define COMPILER_STRING "MSVC _MSC_VER " QT_STRINGIFY(_MSC_VER)
 #  endif
 #else
 #  define COMPILER_STRING "<unknown compiler>"
 #endif
+#ifdef QT_NO_DEBUG
+#  define DEBUG_STRING " release"
+#else
+#  define DEBUG_STRING " debug"
+#endif
+#ifdef QT_SHARED
+#  define SHARED_STRING " shared (dynamic)"
+#else
+#  define SHARED_STRING " static"
+#endif
+#define QT_BUILD_STR "Qt " QT_VERSION_STR " (" ARCH_FULL SHARED_STRING DEBUG_STRING " build; by " COMPILER_STRING ")"
 
 /*!
   Returns a string describing how this version of Qt was built.
@@ -289,21 +324,7 @@ QLibraryInfo::buildDate()
 
 const char *QLibraryInfo::build() Q_DECL_NOTHROW
 {
-   static const char data[] = "Qt " QT_VERSION_STR " (" __DATE__ ", "
-        COMPILER_STRING ", "
-#if QT_POINTER_SIZE == 4
-        "32"
-#else
-        "64"
-#endif
-        " bit, "
-#ifdef QT_NO_DEBUG
-        "release"
-#else
-        "debug"
-#endif
-        " build)";
-    return data;
+    return QT_BUILD_STR;
 }
 
 /*!
@@ -538,7 +559,8 @@ QLibraryInfo::rawLocation(LibraryLocation loc, PathGroup group)
 QStringList QLibraryInfo::platformPluginArguments(const QString &platformName)
 {
 #if !defined(QT_BOOTSTRAPPED) && !defined(QT_NO_SETTINGS)
-    if (const QSettings *settings = QLibraryInfoPrivate::findConfiguration()) {
+    QScopedPointer<const QSettings> settings(QLibraryInfoPrivate::findConfiguration());
+    if (!settings.isNull()) {
         QString key = QLatin1String(platformsSection);
         key += QLatin1Char('/');
         key += platformName;
@@ -590,7 +612,7 @@ extern const char qt_core_interpreter[] __attribute__((section(".interp")))
 extern "C" void qt_core_boilerplate();
 void qt_core_boilerplate()
 {
-    printf("This is the QtCore library version " QT_VERSION_STR "\n"
+    printf("This is the QtCore library version " QT_BUILD_STR "\n"
            "Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).\n"
            "Contact: http://www.qt-project.org/legal\n"
            "\n"
diff --git a/src/corelib/global/qlibraryinfo.h b/src/corelib/global/qlibraryinfo.h
index 0b573c2e6a..543c4b3828 100644
--- a/src/corelib/global/qlibraryinfo.h
+++ b/src/corelib/global/qlibraryinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qlogging.cpp b/src/corelib/global/qlogging.cpp
index 51169eb963..2a4f2dd4d6 100644
--- a/src/corelib/global/qlogging.cpp
+++ b/src/corelib/global/qlogging.cpp
@@ -1,40 +1,34 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Olivier Goffart <ogoffart@woboq.com>
+** Copyright (C) 2014 Intel Corporation.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,9 +42,12 @@
 #include "qmutex.h"
 #include "qloggingcategory.h"
 #ifndef QT_BOOTSTRAPPED
+#include "qelapsedtimer.h"
+#include "qdatetime.h"
 #include "qcoreapplication.h"
 #include "qthread.h"
 #include "private/qloggingregistry_p.h"
+#include "private/qcoreapplication_p.h"
 #endif
 #ifdef Q_OS_WIN
 #include <qt_windows.h>
@@ -67,7 +64,28 @@
 # define SD_JOURNAL_SUPPRESS_LOCATION
 # include <systemd/sd-journal.h>
 # include <syslog.h>
+#endif
+#ifdef Q_OS_UNIX
+# include <sys/types.h>
+# include <sys/stat.h>
 # include <unistd.h>
+# include "private/qcore_unix_p.h"
+#endif
+
+#if !defined QT_NO_REGULAREXPRESSION && !defined(QT_BOOTSTRAPPED)
+#ifdef __has_include
+#if __has_include(<cxxabi.h>) && __has_include(<execinfo.h>)
+#define QLOGGING_HAVE_BACKTRACE
+#endif
+#elif defined(__GLIBCXX__) && defined(__GLIBC__) // (because older version of gcc don't have __has_include)
+#define QLOGGING_HAVE_BACKTRACE
+#endif
+
+#ifdef QLOGGING_HAVE_BACKTRACE
+#include <qregularexpression.h>
+#include <cxxabi.h>
+#include <execinfo.h>
+#endif
 #endif
 
 #include <stdio.h>
@@ -98,32 +116,54 @@ static bool isFatal(QtMsgType msgType)
     return false;
 }
 
-#ifdef Q_OS_WIN
-
-// Do we have stderr for QDebug? - Either there is a console or we are running
-// with redirected stderr.
-#  if !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
-static inline bool hasStdErr()
+static bool willLogToConsole()
 {
-    if (GetConsoleWindow())
+#if defined(Q_OS_WINCE) || defined(Q_OS_WINRT)
+    // these systems have no stderr, so always log to the system log
+    return false;
+#elif defined(QT_BOOTSTRAPPED)
+    return true;
+#else
+    // rules to determine if we'll log preferably to the console:
+    //  1) if QT_LOGGING_TO_CONSOLE is set, it determines behavior:
+    //    - if it's set to 0, we will not log to console
+    //    - if it's set to 1, we will log to console
+    //  2) otherwise, we will log to console if we have a console window (Windows)
+    //     or a controlling TTY (Unix). This is done even if stderr was redirected
+    //     to the blackhole device (NUL or /dev/null).
+
+    bool ok = true;
+    uint envcontrol = qgetenv("QT_LOGGING_TO_CONSOLE").toUInt(&ok);
+    if (ok)
+        return envcontrol;
+
+#  ifdef Q_OS_WIN
+    return GetConsoleWindow();
+#  elif defined(Q_OS_UNIX)
+    // if /dev/tty exists, we can only open it if we have a controlling TTY
+    int devtty = qt_safe_open("/dev/tty", O_RDONLY);
+    if (devtty == -1 && (errno == ENOENT || errno == EPERM)) {
+        // no /dev/tty, fall back to isatty on stderr
+        return isatty(STDERR_FILENO);
+    } else if (devtty != -1) {
+        // there is a /dev/tty and we could open it: we have a controlling TTY
+        qt_safe_close(devtty);
         return true;
-    STARTUPINFO info;
-    GetStartupInfo(&info);
-    return (info.dwFlags & STARTF_USESTDHANDLES) && info.hStdError
-        && info.hStdError != INVALID_HANDLE_VALUE;
-}
-#  endif // !Q_OS_WINCE && !Q_OS_WINRT
+    }
 
-Q_CORE_EXPORT bool qWinLogToStderr()
-{
-#  if !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
-    static const bool result = hasStdErr();
-    return result;
-#  else
+    // no controlling TTY
     return false;
+#  else
+#    error "Not Unix and not Windows?"
 #  endif
+#endif
+}
+
+Q_CORE_EXPORT bool qt_logging_to_console()
+{
+    static const bool logToConsole = willLogToConsole();
+    return logToConsole;
 }
-#endif // Q_OS_WIN
 
 /*!
     \class QMessageLogContext
@@ -134,6 +174,9 @@ Q_CORE_EXPORT bool qWinLogToStderr()
     The class provides information about the source code location a qDebug(), qWarning(),
     qCritical() or qFatal() message was generated.
 
+    \note By default, this information is recorded only in debug builds. You can overwrite
+    this explicitly by defining \c QT_MESSAGELOGCONTEXT or \c{QT_NO_MESSAGELOGCONTEXT}.
+
     \sa QMessageLogger, QtMessageHandler, qInstallMessageHandler()
 */
 
@@ -145,8 +188,9 @@ Q_CORE_EXPORT bool qWinLogToStderr()
 
     QMessageLogger is used to generate messages for the Qt logging framework. Usually one uses
     it through qDebug(), qWarning(), qCritical, or qFatal() functions,
-    which are actually macros that expand to QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO).debug()
-    et al.
+    which are actually macros: For example qDebug() expands to
+    QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO).debug()
+    for debug builds, and QMessageLogger(0, 0, 0).debug() for release builds.
 
     One example of direct use is to forward errors that stem from a scripting language, e.g. QML:
 
@@ -171,89 +215,15 @@ static inline void convert_to_wchar_t_elided(wchar_t *d, size_t space, const cha
 }
 #endif
 
-#if !defined(QT_NO_EXCEPTIONS)
-/*!
-    \internal
-    Uses a local buffer to output the message. Not locale safe + cuts off
-    everything after character 255, but will work in out of memory situations.
-    Stop the execution afterwards.
-*/
-static void qEmergencyOut(QtMsgType msgType, const char *msg, va_list ap) Q_DECL_NOEXCEPT
-{
-    char emergency_buf[256] = { '\0' };
-    emergency_buf[sizeof emergency_buf - 1] = '\0';
-#if defined(Q_OS_WIN) && defined(QT_BUILD_CORE_LIB) && (defined(Q_OS_WINCE) || defined(Q_OS_WINRT)) \
-    || defined(Q_CC_MSVC) && defined(QT_DEBUG) && defined(_DEBUG) && defined(_CRT_ERROR)
-    wchar_t emergency_bufL[sizeof emergency_buf];
-#endif
-
-    if (msg)
-        qvsnprintf(emergency_buf, sizeof emergency_buf - 1, msg, ap);
-
-#if defined(Q_OS_WIN) && defined(QT_BUILD_CORE_LIB)
-# if defined(Q_OS_WINCE) || defined(Q_OS_WINRT)
-    convert_to_wchar_t_elided(emergency_bufL, sizeof emergency_buf, emergency_buf);
-    OutputDebugStringW(emergency_bufL);
-# else
-    if (qWinLogToStderr()) {
-        fprintf(stderr, "%s\n", emergency_buf);
-        fflush(stderr);
-    } else {
-        OutputDebugStringA(emergency_buf);
-    }
-# endif
-#else
-    fprintf(stderr, "%s\n", emergency_buf);
-    fflush(stderr);
-#endif
-
-    if (isFatal(msgType)) {
-#if defined(Q_CC_MSVC) && defined(QT_DEBUG) && defined(_DEBUG) && defined(_CRT_ERROR)
-        // get the current report mode
-        int reportMode = _CrtSetReportMode(_CRT_ERROR, _CRTDBG_MODE_WNDW);
-        _CrtSetReportMode(_CRT_ERROR, reportMode);
-# ifndef Q_OS_WINCE // otherwise already converted to wchar_t above
-        convert_to_wchar_t_elided(emergency_bufL, sizeof emergency_buf, emergency_buf);
-# endif
-        int ret = _CrtDbgReportW(_CRT_ERROR, _CRT_WIDE(__FILE__), __LINE__,
-                                 _CRT_WIDE(QT_VERSION_STR),
-                                 emergency_bufL);
-        if (ret == 1)
-            _CrtDbgBreak();
-#endif
-
-#if (defined(Q_OS_UNIX) || defined(Q_CC_MINGW))
-        abort(); // trap; generates core dump
-#else
-        exit(1); // goodbye cruel world
-#endif
-    }
-}
-#endif
-
 /*!
     \internal
 */
 static void qt_message(QtMsgType msgType, const QMessageLogContext &context, const char *msg,
                        va_list ap, QString &buf)
 {
-#if !defined(QT_NO_EXCEPTIONS)
-    if (std::uncaught_exception()) {
-        qEmergencyOut(msgType, msg, ap);
-        return;
-    }
-#endif
-    if (msg) {
-        QT_TRY {
-            buf = QString().vsprintf(msg, ap);
-        } QT_CATCH(const std::bad_alloc &) {
-#if !defined(QT_NO_EXCEPTIONS)
-            qEmergencyOut(msgType, msg, ap);
-            // don't rethrow - we use qWarning and friends in destructors.
-            return;
-#endif
-        }
-    }
+
+    if (msg)
+        buf = QString().vsprintf(msg, ap);
     qt_message_print(msgType, context, buf);
 }
 
@@ -834,6 +804,8 @@ static const char functionTokenC[] = "%{function}";
 static const char pidTokenC[] = "%{pid}";
 static const char appnameTokenC[] = "%{appname}";
 static const char threadidTokenC[] = "%{threadid}";
+static const char timeTokenC[] = "%{time"; //not a typo: this command has arguments
+static const char backtraceTokenC[] = "%{backtrace"; //ditto
 static const char ifCategoryTokenC[] = "%{if-category}";
 static const char ifDebugTokenC[] = "%{if-debug}";
 static const char ifWarningTokenC[] = "%{if-warning}";
@@ -854,9 +826,18 @@ struct QMessagePattern {
     // 0 terminated arrays of literal tokens / literal or placeholder tokens
     const char **literals;
     const char **tokens;
+    QString timeFormat;
+#ifdef QLOGGING_HAVE_BACKTRACE
+    int backtraceDepth;
+    QString backtraceSeparator;
+#endif
 
     bool fromEnvironment;
     static QBasicMutex mutex;
+#ifndef QT_BOOTSTRAPPED
+    QElapsedTimer timer;
+    QDateTime startTime;
+#endif
 };
 
 QBasicMutex QMessagePattern::mutex;
@@ -864,8 +845,18 @@ QBasicMutex QMessagePattern::mutex;
 QMessagePattern::QMessagePattern()
     : literals(0)
     , tokens(0)
+#ifdef QLOGGING_HAVE_BACKTRACE
+    , backtraceDepth(5)
+    , backtraceSeparator(QLatin1Char('|'))
+#endif
     , fromEnvironment(false)
+#ifndef QT_BOOTSTRAPPED
+    , startTime(QDateTime::currentDateTime())
+#endif
 {
+#ifndef QT_BOOTSTRAPPED
+    timer.start();
+#endif
     const QString envPattern = QString::fromLocal8Bit(qgetenv("QT_MESSAGE_PATTERN"));
     if (envPattern.isEmpty()) {
         setPattern(QLatin1String(defaultPattern));
@@ -953,6 +944,31 @@ void QMessagePattern::setPattern(const QString &pattern)
                 tokens[i] = appnameTokenC;
             else if (lexeme == QLatin1String(threadidTokenC))
                 tokens[i] = threadidTokenC;
+            else if (lexeme.startsWith(QLatin1String(timeTokenC))) {
+                tokens[i] = timeTokenC;
+                int spaceIdx = lexeme.indexOf(QChar::fromLatin1(' '));
+                if (spaceIdx > 0)
+                    timeFormat = lexeme.mid(spaceIdx + 1, lexeme.length() - spaceIdx - 2);
+            } else if (lexeme.startsWith(QLatin1String(backtraceTokenC))) {
+#ifdef QLOGGING_HAVE_BACKTRACE
+                tokens[i] = backtraceTokenC;
+                QRegularExpression depthRx(QStringLiteral(" depth=(?|\"([^\"]*)\"|([^ }]*))"));
+                QRegularExpression separatorRx(QStringLiteral(" separator=(?|\"([^\"]*)\"|([^ }]*))"));
+                QRegularExpressionMatch m = depthRx.match(lexeme);
+                if (m.hasMatch()) {
+                    int depth = m.capturedRef(1).toInt();
+                    if (depth <= 0)
+                        error += QStringLiteral("QT_MESSAGE_PATTERN: %{backtrace} depth must be a number greater than 0\n");
+                    else
+                        backtraceDepth = depth;
+                }
+                m = separatorRx.match(lexeme);
+                if (m.hasMatch())
+                    backtraceSeparator = m.captured(1);
+#else
+                error += QStringLiteral("QT_MESSAGE_PATTERN: %{backtrace} is not supported by this Qt build\n");
+#endif
+            }
 
 #define IF_TOKEN(LEVEL) \
             else if (lexeme == QLatin1String(LEVEL)) { \
@@ -994,7 +1010,7 @@ void QMessagePattern::setPattern(const QString &pattern)
         OutputDebugString(reinterpret_cast<const wchar_t*>(error.utf16()));
         if (0)
 #elif defined(Q_OS_WIN) && defined(QT_BUILD_CORE_LIB)
-        if (!qWinLogToStderr()) {
+        if (!qt_logging_to_console()) {
             OutputDebugString(reinterpret_cast<const wchar_t*>(error.utf16()));
         } else
 #endif
@@ -1061,10 +1077,20 @@ static void slog2_default_handler(QtMsgType msgType, const char *message)
 Q_GLOBAL_STATIC(QMessagePattern, qMessagePattern)
 
 /*!
-    \internal
-*/
-Q_CORE_EXPORT QString qMessageFormatString(QtMsgType type, const QMessageLogContext &context,
-                                              const QString &str)
+    \relates <QtGlobal>
+    \since 5.4
+
+    Generates a formatted string out of the \a type, \a context, \a str arguments.
+
+    qFormatLogMessage returns a QString that is formatted according to the current message pattern.
+    It can be used by custom message handlers to format output similar to Qt's default message
+    handler.
+
+    The function is thread-safe.
+
+    \sa qInstallMessageHandler(), qSetMessagePattern()
+ */
+QString qFormatLogMessage(QtMsgType type, const QMessageLogContext &context, const QString &str)
 {
     QString message;
 
@@ -1122,6 +1148,68 @@ Q_CORE_EXPORT QString qMessageFormatString(QtMsgType type, const QMessageLogCont
         } else if (token == threadidTokenC) {
             message.append(QLatin1String("0x"));
             message.append(QString::number(qlonglong(QThread::currentThread()->currentThread()), 16));
+#ifdef QLOGGING_HAVE_BACKTRACE
+        } else if (token == backtraceTokenC) {
+            QVarLengthArray<void*, 32> buffer(15 + pattern->backtraceDepth);
+            int n = backtrace(buffer.data(), buffer.size());
+            if (n > 0) {
+                QScopedPointer<char*, QScopedPointerPodDeleter> strings(backtrace_symbols(buffer.data(), n));
+                int numberPrinted = 0;
+                for (int i = 0; i < n && numberPrinted < pattern->backtraceDepth; ++i) {
+                    QString trace = QString::fromLatin1(strings.data()[i]);
+                    // The results of backtrace_symbols looks like this:
+                    //    /lib/libc.so.6(__libc_start_main+0xf3) [0x4a937413]
+                    // The offset and function name are optional.
+                    // This regexp tries to extract the librry name (without the path) and the function name.
+                    // This code is protected by QMessagePattern::mutex so it is thread safe on all compilers
+                    static QRegularExpression rx(QStringLiteral("^(?:[^(]*/)?([^(/]+)\\(([^+]*)(?:[\\+[a-f0-9x]*)?\\) \\[[a-f0-9x]*\\]$"),
+                                                 QRegularExpression::OptimizeOnFirstUsageOption);
+
+                    QRegularExpressionMatch m = rx.match(trace);
+                    if (m.hasMatch()) {
+                        // skip the trace from QtCore that are because of the qDebug itself
+                        QString library = m.captured(1);
+                        QString function = m.captured(2);
+                        if (!numberPrinted && library.contains(QLatin1String("Qt5Core"))
+                            && (function.isEmpty() || function.contains(QLatin1String("Message"), Qt::CaseInsensitive)
+                                || function.contains(QLatin1String("QDebug")))) {
+                            continue;
+                        }
+
+                        if (function.startsWith(QLatin1String("_Z"))) {
+                            QScopedPointer<char, QScopedPointerPodDeleter> demangled(
+                                abi::__cxa_demangle(function.toUtf8(), 0, 0, 0));
+                            if (demangled)
+                                function = QString::fromUtf8(qCleanupFuncinfo(demangled.data()));
+                        }
+
+                        if (numberPrinted > 0)
+                            message.append(pattern->backtraceSeparator);
+
+                        if (function.isEmpty()) {
+                            if (numberPrinted == 0 && context.function)
+                                message += QString::fromUtf8(qCleanupFuncinfo(context.function));
+                            else
+                                message += QLatin1Char('?') + library + QLatin1Char('?');
+                        } else {
+                            message += function;
+                        }
+
+                    } else {
+                        if (numberPrinted == 0)
+                            continue;
+                        message += pattern->backtraceSeparator + QLatin1String("???");
+                    }
+                    numberPrinted++;
+                }
+            }
+#endif
+        } else if (token == timeTokenC) {
+            quint64 ms = pattern->timer.elapsed();
+            if (pattern->timeFormat.isEmpty())
+                message.append(QString().sprintf("%6d.%03d", uint(ms / 1000), uint(ms % 1000)));
+            else
+                message.append(pattern->startTime.addMSecs(ms).toString(pattern->timeFormat));
 #endif
         } else if (token == ifCategoryTokenC) {
             if (!context.category || (strcmp(context.category, "default") == 0))
@@ -1212,65 +1300,27 @@ static void android_default_message_handler(QtMsgType type,
 static void qDefaultMessageHandler(QtMsgType type, const QMessageLogContext &context,
                                    const QString &buf)
 {
-    // to determine logging destination and marking logging environment variable as deprecated
-    // ### remove when deprecated
-    struct LogDestination {
-        LogDestination(const char *deprecated, bool forceConsole) {
-            const char* replacement = "QT_LOGGING_TO_CONSOLE";
-            bool newEnv = qEnvironmentVariableIsSet(replacement);
-            bool oldEnv = qEnvironmentVariableIsSet(deprecated);
-            if (oldEnv && !newEnv && !forceConsole) {
-                fprintf(stderr, "Warning: Environment variable %s is deprecated, "
-                                "use %s instead.\n", deprecated, replacement);
-                fflush(stderr);
-            }
-            toConsole = newEnv || oldEnv || forceConsole;
-        }
-        bool toConsole;
-    };
+    QString logMessage = qFormatLogMessage(type, context, buf);
 
-    QString logMessage = qMessageFormatString(type, context, buf);
-
-#if defined(Q_OS_WIN) && defined(QT_BUILD_CORE_LIB)
-    if (!qWinLogToStderr()) {
+    if (!qt_logging_to_console()) {
+#if defined(Q_OS_WIN)
         OutputDebugString(reinterpret_cast<const wchar_t *>(logMessage.utf16()));
         return;
-    }
-#endif // Q_OS_WIN
-
-#if defined(QT_USE_SLOG2)
-    static const bool logToConsole = qEnvironmentVariableIsSet("QT_LOGGING_TO_CONSOLE");
-    if (!logToConsole) {
+#elif defined(QT_USE_SLOG2)
         slog2_default_handler(type, logMessage.toLocal8Bit().constData());
-    } else {
-        fprintf(stderr, "%s", logMessage.toLocal8Bit().constData());
-        fflush(stderr);
-    }
+        return;
 #elif defined(QT_USE_JOURNALD) && !defined(QT_BOOTSTRAPPED)
-    // We use isatty to catch the obvious case of someone running something interactively.
-    // We also support environment variables for Qt Creator use, or more complicated cases
-    // like subprocesses.
-    static const LogDestination logdest("QT_NO_JOURNALD_LOG", isatty(fileno(stdin)));
-    if (Q_LIKELY(!logdest.toConsole)) {
         // remove trailing \n, systemd appears to want them newline-less
         logMessage.chop(1);
         systemd_default_message_handler(type, context, logMessage);
-    } else {
-        fprintf(stderr, "%s", logMessage.toLocal8Bit().constData());
-        fflush(stderr);
-    }
+        return;
 #elif defined(Q_OS_ANDROID)
-    static const LogDestination logdest("QT_ANDROID_PLAIN_LOG", false);
-    if (!logdest.toConsole) {
         android_default_message_handler(type, context, logMessage);
-    } else {
-        fprintf(stderr, "%s", logMessage.toLocal8Bit().constData());
-        fflush(stderr);
+        return;
+#endif
     }
-#else
     fprintf(stderr, "%s", logMessage.toLocal8Bit().constData());
     fflush(stderr);
-#endif
 }
 
 /*!
@@ -1500,6 +1550,17 @@ void qErrnoWarning(int code, const char *msg, ...)
     \row \li \c %{pid} \li QCoreApplication::applicationPid()
     \row \li \c %{threadid} \li ID of current thread
     \row \li \c %{type} \li "debug", "warning", "critical" or "fatal"
+    \row \li \c %{time} \li time of the message, in seconds since the process started
+    \row \li \c %{time format} \li system time when the message occurred, formatted by
+        passing the \c format to \l QDateTime::toString()
+    \row \li \c{%{backtrace [depth=N] [separator="..."]}} \li A backtrace with the number of frames
+        specified by the optional \c depth parameter (defaults to 5), and separated by the optional
+        \c separator parameter (defaults to "|").
+        This expansion is available only on some platforms (currently only platfoms using glibc).
+        Names are only known for exported functions. If you want to see the name of every function
+        in your application, use \c{QMAKE_LFLAGS += -rdynamic}.
+        When reading backtraces, take into account that frames might be missing due to inlining or
+        tail call optimization.
     \endtable
 
     You can also use conditionals on the type of the message using \c %{if-debug},
@@ -1511,7 +1572,7 @@ void qErrnoWarning(int code, const char *msg, ...)
 
     Example:
     \code
-    QT_MESSAGE_PATTERN="[%{if-debug}D%{endif}%{if-warning}W%{endif}%{if-critical}C%{endif}%{if-fatal}F%{endif}] %{file}:%{line} - %{message}"
+    QT_MESSAGE_PATTERN="[%{time yyyyMMdd h:mm:ss.zzz t} %{if-debug}D%{endif}%{if-warning}W%{endif}%{if-critical}C%{endif}%{if-fatal}F%{endif}] %{file}:%{line} - %{message}"
     \endcode
 
     The default \a pattern is "%{if-category}%{category}: %{endif}%{message}".
@@ -1520,7 +1581,7 @@ void qErrnoWarning(int code, const char *msg, ...)
     environment variable; if both qSetMessagePattern() is called and QT_MESSAGE_PATTERN is
     set, the environment variable takes precedence.
 
-    qSetMessagePattern() has no effect if a custom message handler is installed.
+    Custom message handlers can use qFormatLogMessage() to take \a pattern into account.
 
     \sa qInstallMessageHandler(), {Debugging Techniques}
  */
diff --git a/src/corelib/global/qlogging.h b/src/corelib/global/qlogging.h
index 6ebffa3ba1..f9bbf7fcce 100644
--- a/src/corelib/global/qlogging.h
+++ b/src/corelib/global/qlogging.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,9 +57,9 @@ class QMessageLogContext
 {
     Q_DISABLE_COPY(QMessageLogContext)
 public:
-    Q_DECL_CONSTEXPR QMessageLogContext() : version(1), line(0), file(0), function(0), category(0) {}
+    Q_DECL_CONSTEXPR QMessageLogContext() : version(2), line(0), file(0), function(0), category(0) {}
     Q_DECL_CONSTEXPR QMessageLogContext(const char *fileName, int lineNumber, const char *functionName, const char *categoryName)
-        : version(1), line(lineNumber), file(fileName), function(functionName), category(categoryName) {}
+        : version(2), line(lineNumber), file(fileName), function(functionName), category(categoryName) {}
 
     void copy(const QMessageLogContext &logContext);
 
@@ -132,13 +124,28 @@ private:
     QMessageLogContext context;
 };
 
-/*
-  qDebug, qWarning, qCritical, qFatal are redefined to automatically include context information
- */
-#define qDebug QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO).debug
-#define qWarning QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO).warning
-#define qCritical QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO).critical
-#define qFatal QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO).fatal
+#if !defined(QT_MESSAGELOGCONTEXT) && !defined(QT_NO_MESSAGELOGCONTEXT)
+#  if defined(QT_NO_DEBUG)
+#    define QT_NO_MESSAGELOGCONTEXT
+#  else
+#    define QT_MESSAGELOGCONTEXT
+#  endif
+#endif
+
+#ifdef QT_MESSAGELOGCONTEXT
+  #define QT_MESSAGELOG_FILE __FILE__
+  #define QT_MESSAGELOG_LINE __LINE__
+  #define QT_MESSAGELOG_FUNC Q_FUNC_INFO
+#else
+  #define QT_MESSAGELOG_FILE 0
+  #define QT_MESSAGELOG_LINE 0
+  #define QT_MESSAGELOG_FUNC 0
+#endif
+
+#define qDebug QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC).debug
+#define qWarning QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC).warning
+#define qCritical QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC).critical
+#define qFatal QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC).fatal
 
 #define QT_NO_QDEBUG_MACRO while (false) QMessageLogger().noDebug
 #define QT_NO_QWARNING_MACRO while (false) QMessageLogger().noDebug
@@ -167,6 +174,8 @@ typedef void (*QtMessageHandler)(QtMsgType, const QMessageLogContext &, const QS
 Q_CORE_EXPORT QtMessageHandler qInstallMessageHandler(QtMessageHandler);
 
 Q_CORE_EXPORT void qSetMessagePattern(const QString &messagePattern);
+Q_CORE_EXPORT QString qFormatLogMessage(QtMsgType type, const QMessageLogContext &context,
+                                        const QString &buf);
 
 QT_END_NAMESPACE
 #endif // QLOGGING_H
diff --git a/src/corelib/global/qmalloc.cpp b/src/corelib/global/qmalloc.cpp
index 1b4408744e..1dc775def4 100644
--- a/src/corelib/global/qmalloc.cpp
+++ b/src/corelib/global/qmalloc.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qnamespace.h b/src/corelib/global/qnamespace.h
index 839d352d36..e239a11cda 100644
--- a/src/corelib/global/qnamespace.h
+++ b/src/corelib/global/qnamespace.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -88,6 +80,7 @@ Qt {
     Q_FLAGS(KeyboardModifiers MouseButtons)
     Q_ENUMS(WindowType WindowState WindowModality WidgetAttribute ApplicationAttribute)
     Q_FLAGS(WindowFlags WindowStates)
+    Q_ENUMS(FocusReason)
     Q_ENUMS(InputMethodHint InputMethodQuery)
     Q_FLAGS(InputMethodHints InputMethodQueries)
     Q_ENUMS(ScreenOrientation)
@@ -97,10 +90,12 @@ Qt {
 #ifndef QT_NO_GESTURES
     Q_ENUMS(GestureState)
     Q_ENUMS(GestureType)
+    Q_ENUMS(NativeGestureType)
 #endif
     Q_ENUMS(CursorMoveStyle)
     Q_ENUMS(TimerType)
     Q_ENUMS(ScrollPhase)
+    Q_ENUMS(MouseEventSource)
 #endif // defined(Q_MOC_RUN)
 
 #if defined(Q_MOC_RUN)
@@ -499,6 +494,8 @@ public:
         WA_X11DoNotAcceptFocus = 126,
         WA_MacNoShadow = 127,
 
+        WA_AlwaysStackOnTop = 128,
+
         // Add new attributes before this line
         WA_AttributeCount
     };
@@ -521,6 +518,8 @@ public:
         AA_ForceRasterWidgets = 14,
         AA_UseDesktopOpenGL = 15,
         AA_UseOpenGLES = 16,
+        AA_UseSoftwareOpenGL = 17,
+        AA_ShareOpenGLContexts = 18,
 
         // Add new attributes before this line
         AA_AttributeCount
@@ -1011,6 +1010,15 @@ public:
         Key_Info     = 0x0100011b,
         Key_Settings = 0x0100011c,
 
+        Key_MicVolumeUp   = 0x0100011d,
+        Key_MicVolumeDown = 0x0100011e,
+
+        Key_New      = 0x01000120,
+        Key_Open     = 0x01000121,
+        Key_Find     = 0x01000122,
+        Key_Undo     = 0x01000123,
+        Key_Redo     = 0x01000124,
+
         Key_MediaLast = 0x0100ffff,
 
         // Keypad navigation keys
diff --git a/src/corelib/global/qnamespace.qdoc b/src/corelib/global/qnamespace.qdoc
index 50697e82a7..044ba66a4c 100644
--- a/src/corelib/global/qnamespace.qdoc
+++ b/src/corelib/global/qnamespace.qdoc
@@ -168,14 +168,31 @@
     \value AA_ForceRasterWidgets Make top-level widgets use pure raster surfaces,
            and do not support non-native GL-based child widgets.
 
-    \value AA_UseDesktopOpenGL Forces the usage of the desktop OpenGL on
-           platforms that use dynamic loading of the OpenGL implementation.
+    \value AA_UseDesktopOpenGL Forces the usage of desktop OpenGL (for example,
+           \e opengl32.dll or \e libGL.so) on platforms that use dynamic loading
+           of the OpenGL implementation.
            This value has been added in Qt 5.3.
 
-    \value AA_UseOpenGLES Forces the usage of OpenGL ES 2.0 on platforms that
-           use dynamic loading of the OpenGL implementation.
+    \value AA_UseOpenGLES Forces the usage of OpenGL ES 2.0 or higher on
+           platforms that use dynamic loading of the OpenGL implementation.
            This value has been added in Qt 5.3.
 
+    \value AA_UseSoftwareOpenGL Forces the usage of a software based OpenGL
+           implementation on platforms that use dynamic loading of the OpenGL
+           implementation. This will typically be a patched build of
+           \l{http://www.mesa3d.org/llvmpipe.html}{Mesa llvmpipe}, providing
+           OpenGL 2.1. The value may have no effect if no such OpenGL
+           implementation is available. The default name of this library is
+           QtSoftwareOpenGL.dll and can be overridden by setting the environment
+           variable \e QT_OPENGL_DLL. See the platform-specific pages, for
+           instance \l{Qt for Windows}, for more information.  This value has
+           been added in Qt 5.4.
+
+    \value AA_ShareOpenGLContexts Enables resource sharing between the OpenGL
+           contexts used by classes like QOpenGLWidget and QQuickWidget. This
+           allows sharing OpenGL resources, like textures, between QOpenGLWidget
+           instances that belong to different top-level windows.
+
     The following values are obsolete:
 
     \value AA_ImmediateWidgetCreation This attribute is no longer fully
@@ -1191,6 +1208,13 @@
     to this top level window. This attribute has no effect on non-X11
     platforms.
 
+    \value WA_AlwaysStackOnTop Since Qt 5.4, this value forces QOpenGLWidget and
+    QQuickWidget to be drawn last, on top of other widgets. Ignored for other
+    type of widgets. Setting this attribute breaks the stacking order, but
+    allows having a semi-transparent OpenGL widget with other widgets visible
+    underneath. It is strongly recommended to call update() on the widget's
+    top-level window after enabling or disabling this attribute.
+
     \omitvalue WA_SetLayoutDirection
     \omitvalue WA_InputMethodTransparent
     \omitvalue WA_WState_CompressKeys
diff --git a/src/corelib/global/qnumeric.cpp b/src/corelib/global/qnumeric.cpp
index 7d8bd8c3c6..d82cdd2629 100644
--- a/src/corelib/global/qnumeric.cpp
+++ b/src/corelib/global/qnumeric.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -140,6 +132,7 @@ static inline quint32 f2i(float f)
     \endcode
 
     \sa qFuzzyCompare()
+    \since 5.2
     \relates <QtGlobal>
 */
 Q_CORE_EXPORT quint32 qFloatDistance(float a, float b)
@@ -197,6 +190,7 @@ static inline quint64 d2i(double d)
 
 
     \sa qFuzzyCompare()
+    \since 5.2
     \relates <QtGlobal>
 */
 Q_CORE_EXPORT quint64 qFloatDistance(double a, double b)
diff --git a/src/corelib/global/qnumeric.h b/src/corelib/global/qnumeric.h
index 633486dff1..4f06823dd2 100644
--- a/src/corelib/global/qnumeric.h
+++ b/src/corelib/global/qnumeric.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qnumeric_p.h b/src/corelib/global/qnumeric_p.h
index dba5d4d780..79ce74bd2e 100644
--- a/src/corelib/global/qnumeric_p.h
+++ b/src/corelib/global/qnumeric_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qprocessordetection.h b/src/corelib/global/qprocessordetection.h
index 47d6dcd7f6..26ac56396b 100644
--- a/src/corelib/global/qprocessordetection.h
+++ b/src/corelib/global/qprocessordetection.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qsysinfo.h b/src/corelib/global/qsysinfo.h
index 38735c12de..277caa8db6 100644
--- a/src/corelib/global/qsysinfo.h
+++ b/src/corelib/global/qsysinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -136,6 +128,7 @@ public:
         MV_10_7 = 0x0009,
         MV_10_8 = 0x000A,
         MV_10_9 = 0x000B,
+        MV_10_10 = 0x000C,
 
         /* codenames */
         MV_CHEETAH = MV_10_0,
@@ -148,6 +141,7 @@ public:
         MV_LION = MV_10_7,
         MV_MOUNTAINLION = MV_10_8,
         MV_MAVERICKS = MV_10_9,
+        MV_YOSEMITE = MV_10_10,
 
         /* iOS */
         MV_IOS     = 1 << 8,
@@ -157,11 +151,22 @@ public:
         MV_IOS_6_0 = Q_MV_IOS(6, 0),
         MV_IOS_6_1 = Q_MV_IOS(6, 1),
         MV_IOS_7_0 = Q_MV_IOS(7, 0),
-        MV_IOS_7_1 = Q_MV_IOS(7, 1)
+        MV_IOS_7_1 = Q_MV_IOS(7, 1),
+        MV_IOS_8_0 = Q_MV_IOS(8, 0)
     };
     static const MacVersion MacintoshVersion;
     static MacVersion macVersion();
 #endif
+
+    static QString buildCpuArchitecture();
+    static QString currentCpuArchitecture();
+    static QString buildAbi();
+
+    static QString kernelType();
+    static QString kernelVersion();
+    static QString productType();
+    static QString productVersion();
+    static QString prettyProductName();
 };
 
 QT_END_NAMESPACE
diff --git a/src/corelib/global/qsystemdetection.h b/src/corelib/global/qsystemdetection.h
index 0431e10133..08a5daa5f4 100644
--- a/src/corelib/global/qsystemdetection.h
+++ b/src/corelib/global/qsystemdetection.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -235,6 +227,9 @@
 #  if !defined(__MAC_10_9)
 #       define __MAC_10_9 1090
 #  endif
+#  if !defined(__MAC_10_10)
+#       define __MAC_10_10 101000
+#  endif
 #  if !defined(MAC_OS_X_VERSION_10_7)
 #       define MAC_OS_X_VERSION_10_7 1070
 #  endif
@@ -244,6 +239,9 @@
 #  if !defined(MAC_OS_X_VERSION_10_9)
 #       define MAC_OS_X_VERSION_10_9 1090
 #  endif
+#  if !defined(MAC_OS_X_VERSION_10_10)
+#       define MAC_OS_X_VERSION_10_10 101000
+#  endif
 #
 #  if !defined(__IPHONE_4_3)
 #       define __IPHONE_4_3 40300
@@ -263,6 +261,12 @@
 #  if !defined(__IPHONE_7_0)
 #       define __IPHONE_7_0 70000
 #  endif
+#  if !defined(__IPHONE_7_1)
+#       define __IPHONE_7_1 70100
+#  endif
+#  if !defined(__IPHONE_8_0)
+#       define __IPHONE_8_0 80000
+#  endif
 #endif
 
 #ifdef __LSB_VERSION__
diff --git a/src/corelib/global/qt_pch.h b/src/corelib/global/qt_pch.h
index 76cdec2dc6..b9666a03c1 100644
--- a/src/corelib/global/qt_pch.h
+++ b/src/corelib/global/qt_pch.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qt_windows.h b/src/corelib/global/qt_windows.h
index c3266c5487..22cded8436 100644
--- a/src/corelib/global/qt_windows.h
+++ b/src/corelib/global/qt_windows.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/global/qtypeinfo.h b/src/corelib/global/qtypeinfo.h
index 8478e08416..e5abb8138b 100644
--- a/src/corelib/global/qtypeinfo.h
+++ b/src/corelib/global/qtypeinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,7 +56,7 @@ public:
         isComplex = true,
         isStatic = true,
         isLarge = (sizeof(T)>sizeof(void*)),
-        isDummy = false,
+        isDummy = false, //### Qt6: remove
         sizeOf = sizeof(T)
     };
 };
diff --git a/src/corelib/global/qtypetraits.h b/src/corelib/global/qtypetraits.h
index 2ae66da92b..41e276fb11 100644
--- a/src/corelib/global/qtypetraits.h
+++ b/src/corelib/global/qtypetraits.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -82,11 +74,15 @@
 //   is_pointer
 //   is_enum
 //   is_reference
+//   is_const
+//   is_volatile
 //   is_pod
 //   has_trivial_constructor
 //   has_trivial_copy
 //   has_trivial_assign
 //   has_trivial_destructor
+//   is_signed
+//   is_unsigned
 //   remove_const
 //   remove_volatile
 //   remove_cv
@@ -325,6 +321,11 @@ template <class T> struct is_enum<const volatile T> : is_enum<T> { };
 template<typename T> struct is_reference : false_type {};
 template<typename T> struct is_reference<T&> : true_type {};
 
+// Specified by TR1 [4.5.3] Type Properties
+template <typename T> struct is_const : false_type {};
+template <typename T> struct is_const<const T> : true_type {};
+template <typename T> struct is_volatile : false_type {};
+template <typename T> struct is_volatile<volatile T> : true_type {};
 
 // We can't get is_pod right without compiler help, so fail conservatively.
 // We will assume it's false except for arithmetic types, enumerations,
diff --git a/src/corelib/io/io.pri b/src/corelib/io/io.pri
index f651860e08..bdc362ef22 100644
--- a/src/corelib/io/io.pri
+++ b/src/corelib/io/io.pri
@@ -32,6 +32,8 @@ HEADERS +=  \
         io/qresource_iterator_p.h \
         io/qsavefile.h \
         io/qstandardpaths.h \
+        io/qstorageinfo.h \
+        io/qstorageinfo_p.h \
         io/qurl.h \
         io/qurl_p.h \
         io/qurlquery.h \
@@ -51,7 +53,6 @@ HEADERS +=  \
         io/qfileselector.h \
         io/qfileselector_p.h \
         io/qloggingcategory.h \
-        io/qloggingcategory_p.h \
         io/qloggingregistry_p.h
 
 SOURCES += \
@@ -71,6 +72,7 @@ SOURCES += \
         io/qlockfile.cpp \
         io/qnoncontiguousbytedevice.cpp \
         io/qprocess.cpp \
+        io/qstorageinfo.cpp \
         io/qtextstream.cpp \
         io/qtemporarydir.cpp \
         io/qtemporaryfile.cpp \
@@ -109,7 +111,8 @@ win32 {
         SOURCES += io/qstandardpaths_win.cpp
 
         wince* {
-            SOURCES += io/qprocess_wince.cpp
+            SOURCES += io/qprocess_wince.cpp \
+                io/qstorageinfo_stub.cpp
         } else {
             HEADERS += \
                 io/qwinoverlappedionotifier_p.h \
@@ -117,10 +120,15 @@ win32 {
             SOURCES += \
                 io/qprocess_win.cpp \
                 io/qwinoverlappedionotifier.cpp \
-                io/qwindowspipereader.cpp
+                io/qwindowspipereader.cpp \
+                io/qstorageinfo_win.cpp
+            LIBS += -lmpr
         }
     } else {
-        SOURCES += io/qstandardpaths_winrt.cpp
+        SOURCES += \
+                io/qstandardpaths_winrt.cpp \
+                io/qsettings_winrt.cpp \
+                io/qstorageinfo_stub.cpp
     }
 } else:unix|integrity {
         SOURCES += \
@@ -140,18 +148,28 @@ win32 {
                 HEADERS += io/qfilesystemwatcher_fsevents_p.h
             }
             macx {
-                SOURCES += io/qstandardpaths_mac.cpp
+                SOURCES += \
+                    io/qstorageinfo_mac.cpp \
+                    io/qstandardpaths_mac.cpp
+                LIBS += -framework DiskArbitration -framework IOKit
             } else:ios {
                 OBJECTIVE_SOURCES += io/qstandardpaths_ios.mm
+                SOURCES += io/qstorageinfo_mac.cpp
             } else {
                 SOURCES += io/qstandardpaths_unix.cpp
             }
         } else:blackberry {
-            SOURCES += io/qstandardpaths_blackberry.cpp
+            SOURCES += \
+                io/qstandardpaths_blackberry.cpp \
+                io/qstorageinfo_unix.cpp
         } else:android:!android-no-sdk {
-            SOURCES += io/qstandardpaths_android.cpp
+            SOURCES += \
+                io/qstandardpaths_android.cpp \
+                io/qstorageinfo_unix.cpp
         } else {
-            SOURCES += io/qstandardpaths_unix.cpp
+            SOURCES += \
+                io/qstandardpaths_unix.cpp \
+                io/qstorageinfo_unix.cpp
         }
 
         linux|if(qnx:contains(QT_CONFIG, inotify)) {
diff --git a/src/corelib/io/qabstractfileengine.cpp b/src/corelib/io/qabstractfileengine.cpp
index a9cb5b5278..9468464cac 100644
--- a/src/corelib/io/qabstractfileengine.cpp
+++ b/src/corelib/io/qabstractfileengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qabstractfileengine_p.h b/src/corelib/io/qabstractfileengine_p.h
index dd64e3d71f..4c8d52bf94 100644
--- a/src/corelib/io/qabstractfileengine_p.h
+++ b/src/corelib/io/qabstractfileengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qbuffer.cpp b/src/corelib/io/qbuffer.cpp
index 5748c5437a..5377eb21e3 100644
--- a/src/corelib/io/qbuffer.cpp
+++ b/src/corelib/io/qbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qbuffer.h b/src/corelib/io/qbuffer.h
index de0fe9f36a..24b05aad13 100644
--- a/src/corelib/io/qbuffer.h
+++ b/src/corelib/io/qbuffer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdatastream.cpp b/src/corelib/io/qdatastream.cpp
index a6fbffee7e..49526ea2d5 100644
--- a/src/corelib/io/qdatastream.cpp
+++ b/src/corelib/io/qdatastream.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -141,7 +133,7 @@ QT_BEGIN_NAMESPACE
     special requirements.
 
     \target raw
-    \section1 Reading and writing raw binary data
+    \section1 Reading and Writing Raw Binary Data
 
     You may wish to read/write your own raw binary data to/from the
     data stream directly. Data may be read from the stream into a
@@ -157,14 +149,14 @@ QT_BEGIN_NAMESPACE
     data, followed by the data. Note that any encoding/decoding of
     the data (apart from the length quint32) must be done by you.
 
-    \section1 Reading and writing Qt collection classes
+    \section1 Reading and Writing Qt Collection Classes
 
     The Qt container classes can also be serialized to a QDataStream.
     These include QList, QLinkedList, QVector, QSet, QHash, and QMap.
     The stream operators are declared as non-members of the classes.
 
     \target Serializing Qt Classes
-    \section1 Reading and writing other Qt classes.
+    \section1 Reading and Writing Other Qt Classes
 
     In addition to the overloaded stream operators documented here,
     any Qt classes that you might want to serialize to a QDataStream
@@ -250,10 +242,6 @@ QT_BEGIN_NAMESPACE
     if (q_status != Ok) \
         return retVal;
 
-enum {
-    DefaultStreamVersion = QDataStream::Qt_5_3
-};
-
 /*!
     Constructs a data stream that has no I/O device.
 
@@ -265,7 +253,7 @@ QDataStream::QDataStream()
     dev = 0;
     owndev = false;
     byteorder = BigEndian;
-    ver = DefaultStreamVersion;
+    ver = Qt_DefaultCompiledVersion;
     noswap = QSysInfo::ByteOrder == QSysInfo::BigEndian;
     q_status = Ok;
 }
@@ -287,7 +275,7 @@ QDataStream::QDataStream(QIODevice *d)
     dev = d;                                // set device
     owndev = false;
     byteorder = BigEndian;                        // default byte order
-    ver = DefaultStreamVersion;
+    ver = Qt_DefaultCompiledVersion;
     noswap = QSysInfo::ByteOrder == QSysInfo::BigEndian;
     q_status = Ok;
 }
@@ -315,7 +303,7 @@ QDataStream::QDataStream(QByteArray *a, QIODevice::OpenMode flags)
     dev = buf;
     owndev = true;
     byteorder = BigEndian;
-    ver = DefaultStreamVersion;
+    ver = Qt_DefaultCompiledVersion;
     noswap = QSysInfo::ByteOrder == QSysInfo::BigEndian;
     q_status = Ok;
 }
@@ -339,7 +327,7 @@ QDataStream::QDataStream(const QByteArray &a)
     dev = buf;
     owndev = true;
     byteorder = BigEndian;
-    ver = DefaultStreamVersion;
+    ver = Qt_DefaultCompiledVersion;
     noswap = QSysInfo::ByteOrder == QSysInfo::BigEndian;
     q_status = Ok;
 }
@@ -542,6 +530,8 @@ void QDataStream::setByteOrder(ByteOrder bo)
     \value Qt_5_1 Version 14 (Qt 5.1)
     \value Qt_5_2 Version 15 (Qt 5.2)
     \value Qt_5_3 Same as Qt_5_2
+    \value Qt_5_4 Version 16 (Qt 5.4)
+    \omitvalue Qt_DefaultCompiledVersion
 
     \sa setVersion(), version()
 */
@@ -557,7 +547,8 @@ void QDataStream::setByteOrder(ByteOrder bo)
 /*!
     \fn void QDataStream::setVersion(int v)
 
-    Sets the version number of the data serialization format to \a v.
+    Sets the version number of the data serialization format to \a v,
+    a value of the \l Version enum.
 
     You don't \e have to set a version if you are using the current
     version of Qt, but for your own custom binary formats we
@@ -571,25 +562,6 @@ void QDataStream::setByteOrder(ByteOrder bo)
     with an earlier version of Qt, use this function to modify the
     serialization format used by QDataStream.
 
-    \table
-    \header \li Qt Version       \li QDataStream Version
-    \row \li Qt 5.2                  \li 15
-    \row \li Qt 5.1                  \li 14
-    \row \li Qt 5.0                  \li 13
-    \row \li Qt 4.6                  \li 12
-    \row \li Qt 4.5                  \li 11
-    \row \li Qt 4.4                  \li 10
-    \row \li Qt 4.3                  \li 9
-    \row \li Qt 4.2                  \li 8
-    \row \li Qt 4.0, 4.1            \li 7
-    \row \li Qt 3.3                  \li 6
-    \row \li Qt 3.1, 3.2             \li 5
-    \row \li Qt 3.0                  \li 4
-    \row \li Qt 2.1, 2.2, 2.3      \li 3
-    \row \li Qt 2.0                  \li 2
-    \row \li Qt 1.x                  \li 1
-    \endtable
-
     The \l Version enum provides symbolic constants for the different
     versions of Qt. For example:
 
diff --git a/src/corelib/io/qdatastream.h b/src/corelib/io/qdatastream.h
index 28f1d51a12..75ffa11543 100644
--- a/src/corelib/io/qdatastream.h
+++ b/src/corelib/io/qdatastream.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -88,10 +80,12 @@ public:
         Qt_5_0 = 13,
         Qt_5_1 = 14,
         Qt_5_2 = 15,
-        Qt_5_3 = Qt_5_2
-#if QT_VERSION >= 0x050400
-#error Add the datastream version for this Qt version
+        Qt_5_3 = Qt_5_2,
+        Qt_5_4 = 16,
+#if QT_VERSION >= 0x050500
+#error Add the datastream version for this Qt version and update Qt_DefaultCompiledVersion
 #endif
+        Qt_DefaultCompiledVersion = Qt_5_4
     };
 
     enum ByteOrder {
diff --git a/src/corelib/io/qdatastream_p.h b/src/corelib/io/qdatastream_p.h
index e8dd5516d1..1c5368b5f9 100644
--- a/src/corelib/io/qdatastream_p.h
+++ b/src/corelib/io/qdatastream_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdataurl.cpp b/src/corelib/io/qdataurl.cpp
index 594bbbbca4..a18f064d39 100644
--- a/src/corelib/io/qdataurl.cpp
+++ b/src/corelib/io/qdataurl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdataurl_p.h b/src/corelib/io/qdataurl_p.h
index 5b909116d3..dfc13d43bf 100644
--- a/src/corelib/io/qdataurl_p.h
+++ b/src/corelib/io/qdataurl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdebug.cpp b/src/corelib/io/qdebug.cpp
index 3370cce6d5..c1e0125cb1 100644
--- a/src/corelib/io/qdebug.cpp
+++ b/src/corelib/io/qdebug.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -79,6 +71,18 @@ QT_BEGIN_NAMESPACE
     used to write debugging information to files and other devices. The constructor
     that accepts a QString is used to write to a string for display or serialization.
 
+    \section1 Formatting Options
+
+    QDebug formats output so that it's easily readable. It automatically adds spaces
+    between arguments, and adds quotes around QString, QByteArray, QChar arguments.
+
+    You can tweak these options through the space(), nospace() and quote(), noquote()
+    methods. Furthermore, \l{QTextStream manipulators} can be piped into a QDebug
+    stream.
+
+    QDebugStateSaver limits changes to the formatting to the current scope.
+    resetFormat() resets the options to the default ones.
+
     \section1 Writing Custom Types to a Stream
 
     Many standard types can be written to QDebug objects, and Qt provides support for
@@ -128,6 +132,20 @@ QT_BEGIN_NAMESPACE
 
     Flushes any pending data to be written and destroys the debug stream.
 */
+// Has been defined in the header / inlined before Qt 5.4
+QDebug::~QDebug()
+{
+    if (!--stream->ref) {
+        if (stream->space && stream->buffer.endsWith(QLatin1Char(' ')))
+            stream->buffer.chop(1);
+        if (stream->message_output) {
+            qt_message_output(stream->type,
+                              stream->context,
+                              stream->buffer);
+        }
+        delete stream;
+    }
+}
 
 /*!
     \fn QDebug::swap(QDebug &other)
@@ -138,6 +156,21 @@ QT_BEGIN_NAMESPACE
 */
 
 /*!
+    Resets the stream formatting options, bringing it back to its original constructed state.
+
+    \sa space(), quote()
+    \since 5.4
+*/
+QDebug &QDebug::resetFormat()
+{
+    stream->ts.reset();
+    stream->space = true;
+    if (stream->context.version > 1)
+        stream->flags = 0;
+    return *this;
+}
+
+/*!
     \fn QDebug &QDebug::space()
 
     Writes a space character to the debug stream and returns a reference to
@@ -188,6 +221,41 @@ QT_BEGIN_NAMESPACE
     \sa QDebugStateSaver
 */
 
+
+/*!
+    \fn QDebug &QDebug::quote()
+    \since 5.4
+
+    Enables automatic insertion of quotation characters around QChar, QString and QByteArray
+    contents and returns a reference to the stream.
+
+    Quoting is enabled by default.
+
+    \sa noquote(), maybeQuote()
+*/
+
+/*!
+    \fn QDebug &QDebug::noquote()
+    \since 5.4
+
+    Disables automatic insertion of quotation characters around QChar, QString and QByteArray
+    contents and returns a reference to the stream.
+
+    \sa quote(), maybeQuote()
+*/
+
+/*!
+    \fn QDebug &QDebug::maybeQuote(char c)
+    \since 5.4
+
+    Writes a character \a c to the debug stream, depending on the
+    current setting for automatic insertion of quotes, and returns a reference to the stream.
+
+    The default character is a double quote \c{"}.
+
+    \sa quote(), noquote()
+*/
+
 /*!
     \fn QDebug &QDebug::operator<<(QChar t)
 
@@ -334,7 +402,9 @@ QT_BEGIN_NAMESPACE
 
     \brief Convenience class for custom QDebug operators
 
-    Saves the settings used by QDebug, and restores them upon destruction.
+    Saves the settings used by QDebug, and restores them upon destruction,
+    then calls maybeSpace(), to separate arguments with a space if
+    autoInsertSpaces() was true at the time of constructing the QDebugStateSaver.
 
     The automatic insertion of spaces between writes is one of the settings
     that QDebugStateSaver stores for the duration of the current block.
@@ -352,19 +422,33 @@ public:
     QDebugStateSaverPrivate(QDebug &dbg)
         : m_dbg(dbg),
           m_spaces(dbg.autoInsertSpaces()),
+          m_flags(0),
           m_streamParams(dbg.stream->ts.d_ptr->params)
     {
+        if (m_dbg.stream->context.version > 1)
+            m_flags = m_dbg.stream->flags;
     }
     void restoreState()
     {
+        const bool currentSpaces = m_dbg.autoInsertSpaces();
+        if (currentSpaces && !m_spaces)
+            if (m_dbg.stream->buffer.endsWith(QLatin1Char(' ')))
+                m_dbg.stream->buffer.chop(1);
+
         m_dbg.setAutoInsertSpaces(m_spaces);
         m_dbg.stream->ts.d_ptr->params = m_streamParams;
+        if (m_dbg.stream->context.version > 1)
+            m_dbg.stream->flags = m_flags;
+
+        if (!currentSpaces && m_spaces)
+            m_dbg.stream->ts << ' ';
     }
 
     QDebug &m_dbg;
 
     // QDebug state
     const bool m_spaces;
+    int m_flags;
 
     // QTextStream state
     const QTextStreamPrivate::Params m_streamParams;
diff --git a/src/corelib/io/qdebug.h b/src/corelib/io/qdebug.h
index bdaaa05768..4edb3057fb 100644
--- a/src/corelib/io/qdebug.h
+++ b/src/corelib/io/qdebug.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,9 +53,9 @@ class Q_CORE_EXPORT QDebug
     friend class QMessageLogger;
     friend class QDebugStateSaverPrivate;
     struct Stream {
-        Stream(QIODevice *device) : ts(device), ref(1), type(QtDebugMsg), space(true), message_output(false) {}
-        Stream(QString *string) : ts(string, QIODevice::WriteOnly), ref(1), type(QtDebugMsg), space(true), message_output(false) {}
-        Stream(QtMsgType t) : ts(&buffer, QIODevice::WriteOnly), ref(1), type(t), space(true), message_output(true) {}
+        Stream(QIODevice *device) : ts(device), ref(1), type(QtDebugMsg), space(true), message_output(false), flags(0) {}
+        Stream(QString *string) : ts(string, QIODevice::WriteOnly), ref(1), type(QtDebugMsg), space(true), message_output(false), flags(0) {}
+        Stream(QtMsgType t) : ts(&buffer, QIODevice::WriteOnly), ref(1), type(t), space(true), message_output(true), flags(0) {}
         QTextStream ts;
         QString buffer;
         int ref;
@@ -71,6 +63,18 @@ class Q_CORE_EXPORT QDebug
         bool space;
         bool message_output;
         QMessageLogContext context;
+
+        enum FormatFlag {
+            NoQuotes = 0x1
+        };
+
+        // ### Qt 6: unify with space, introduce own version member
+        bool testFlag(FormatFlag flag) const { return (context.version > 1) ? (flags & flag) : false; }
+        void setFlag(FormatFlag flag) { if (context.version > 1) { flags |= flag; } }
+        void unsetFlag(FormatFlag flag) { if (context.version > 1) { flags &= ~flag; } }
+
+        // added in 5.4
+        int flags;
     } *stream;
 public:
     inline QDebug(QIODevice *device) : stream(new Stream(device)) {}
@@ -78,22 +82,11 @@ public:
     inline QDebug(QtMsgType t) : stream(new Stream(t)) {}
     inline QDebug(const QDebug &o):stream(o.stream) { ++stream->ref; }
     inline QDebug &operator=(const QDebug &other);
-    inline ~QDebug() {
-        if (!--stream->ref) {
-            if (stream->space && stream->buffer.endsWith(QLatin1Char(' ')))
-                stream->buffer.chop(1);
-            if (stream->message_output) {
-                QT_TRY {
-                    qt_message_output(stream->type,
-                                      stream->context,
-                                      stream->buffer);
-                } QT_CATCH(std::bad_alloc&) { /* We're out of memory - give up. */ }
-            }
-            delete stream;
-        }
-    }
+    ~QDebug();
     inline void swap(QDebug &other) { qSwap(stream, other.stream); }
 
+    QDebug &resetFormat();
+
     inline QDebug &space() { stream->space = true; stream->ts << ' '; return *this; }
     inline QDebug &nospace() { stream->space = false; return *this; }
     inline QDebug &maybeSpace() { if (stream->space) stream->ts << ' '; return *this; }
@@ -101,7 +94,11 @@ public:
     bool autoInsertSpaces() const { return stream->space; }
     void setAutoInsertSpaces(bool b) { stream->space = b; }
 
-    inline QDebug &operator<<(QChar t) { stream->ts << '\'' << t << '\''; return maybeSpace(); }
+    inline QDebug &quote() { stream->unsetFlag(Stream::NoQuotes); return *this; }
+    inline QDebug &noquote() { stream->setFlag(Stream::NoQuotes); return *this; }
+    inline QDebug &maybeQuote(char c = '"') { if (!(stream->testFlag(Stream::NoQuotes))) stream->ts << c; return *this; }
+
+    inline QDebug &operator<<(QChar t) { maybeQuote('\''); stream->ts << t; maybeQuote('\''); return maybeSpace(); }
     inline QDebug &operator<<(bool t) { stream->ts << (t ? "true" : "false"); return maybeSpace(); }
     inline QDebug &operator<<(char t) { stream->ts << t; return maybeSpace(); }
     inline QDebug &operator<<(signed short t) { stream->ts << t; return maybeSpace(); }
@@ -115,10 +112,10 @@ public:
     inline QDebug &operator<<(float t) { stream->ts << t; return maybeSpace(); }
     inline QDebug &operator<<(double t) { stream->ts << t; return maybeSpace(); }
     inline QDebug &operator<<(const char* t) { stream->ts << QString::fromUtf8(t); return maybeSpace(); }
-    inline QDebug &operator<<(const QString & t) { stream->ts << '\"' << t  << '\"'; return maybeSpace(); }
+    inline QDebug &operator<<(const QString & t) { maybeQuote(); stream->ts << t; maybeQuote(); return maybeSpace(); }
     inline QDebug &operator<<(const QStringRef & t) { return operator<<(t.toString()); }
-    inline QDebug &operator<<(QLatin1String t) { stream->ts << '\"'  << t << '\"'; return maybeSpace(); }
-    inline QDebug &operator<<(const QByteArray & t) { stream->ts  << '\"' << t << '\"'; return maybeSpace(); }
+    inline QDebug &operator<<(QLatin1String t) { maybeQuote(); stream->ts << t; maybeQuote(); return maybeSpace(); }
+    inline QDebug &operator<<(const QByteArray & t) { maybeQuote(); stream->ts << t; maybeQuote(); return maybeSpace(); }
     inline QDebug &operator<<(const void * t) { stream->ts << t; return maybeSpace(); }
     inline QDebug &operator<<(QTextStreamFunction f) {
         stream->ts << f;
@@ -150,6 +147,9 @@ public:
     inline QNoDebug &space() { return *this; }
     inline QNoDebug &nospace() { return *this; }
     inline QNoDebug &maybeSpace() { return *this; }
+    inline QNoDebug &quote() { return *this; }
+    inline QNoDebug &noquote() { return *this; }
+    inline QNoDebug &maybeQuote(const char = '"') { return *this; }
 
     template<typename T>
     inline QNoDebug &operator<<(const T &) { return *this; }
@@ -164,13 +164,8 @@ inline QDebug &QDebug::operator=(const QDebug &other)
     return *this;
 }
 
-#if defined(FORCE_UREF)
-template <class T>
-inline QDebug &operator<<(QDebug debug, const QList<T> &list)
-#else
 template <class T>
 inline QDebug operator<<(QDebug debug, const QList<T> &list)
-#endif
 {
     const bool oldSetting = debug.autoInsertSpaces();
     debug.nospace() << '(';
@@ -184,13 +179,8 @@ inline QDebug operator<<(QDebug debug, const QList<T> &list)
     return debug.maybeSpace();
 }
 
-#if defined(FORCE_UREF)
-template <typename T>
-inline QDebug &operator<<(QDebug debug, const QVector<T> &vec)
-#else
 template <typename T>
 inline QDebug operator<<(QDebug debug, const QVector<T> &vec)
-#endif
 {
     const bool oldSetting = debug.autoInsertSpaces();
     debug.nospace() << "QVector";
@@ -198,13 +188,8 @@ inline QDebug operator<<(QDebug debug, const QVector<T> &vec)
     return operator<<(debug, vec.toList());
 }
 
-#if defined(FORCE_UREF)
-template <class aKey, class aT>
-inline QDebug &operator<<(QDebug debug, const QMap<aKey, aT> &map)
-#else
 template <class aKey, class aT>
 inline QDebug operator<<(QDebug debug, const QMap<aKey, aT> &map)
-#endif
 {
     const bool oldSetting = debug.autoInsertSpaces();
     debug.nospace() << "QMap(";
@@ -217,13 +202,8 @@ inline QDebug operator<<(QDebug debug, const QMap<aKey, aT> &map)
     return debug.maybeSpace();
 }
 
-#if defined(FORCE_UREF)
-template <class aKey, class aT>
-inline QDebug &operator<<(QDebug debug, const QHash<aKey, aT> &hash)
-#else
 template <class aKey, class aT>
 inline QDebug operator<<(QDebug debug, const QHash<aKey, aT> &hash)
-#endif
 {
     const bool oldSetting = debug.autoInsertSpaces();
     debug.nospace() << "QHash(";
@@ -235,13 +215,8 @@ inline QDebug operator<<(QDebug debug, const QHash<aKey, aT> &hash)
     return debug.maybeSpace();
 }
 
-#if defined(FORCE_UREF)
-template <class T1, class T2>
-inline QDebug &operator<<(QDebug debug, const QPair<T1, T2> &pair)
-#else
 template <class T1, class T2>
 inline QDebug operator<<(QDebug debug, const QPair<T1, T2> &pair)
-#endif
 {
     const bool oldSetting = debug.autoInsertSpaces();
     debug.nospace() << "QPair(" << pair.first << ',' << pair.second << ')';
@@ -258,13 +233,8 @@ inline QDebug operator<<(QDebug debug, const QSet<T> &set)
     return operator<<(debug, set.toList());
 }
 
-#if defined(FORCE_UREF)
-template <class T>
-inline QDebug &operator<<(QDebug debug, const QContiguousCache<T> &cache)
-#else
 template <class T>
 inline QDebug operator<<(QDebug debug, const QContiguousCache<T> &cache)
-#endif
 {
     const bool oldSetting = debug.autoInsertSpaces();
     debug.nospace() << "QContiguousCache(";
@@ -278,29 +248,24 @@ inline QDebug operator<<(QDebug debug, const QContiguousCache<T> &cache)
     return debug.maybeSpace();
 }
 
-#if defined(FORCE_UREF)
-template <class T>
-inline QDebug &operator<<(QDebug debug, const QFlags<T> &flags)
-#else
 template <class T>
 inline QDebug operator<<(QDebug debug, const QFlags<T> &flags)
-#endif
 {
-    const bool oldSetting = debug.autoInsertSpaces();
-    debug.nospace() << "QFlags(";
+    QDebugStateSaver saver(debug);
+    debug.resetFormat();
+    debug.nospace() << "QFlags(" << hex << showbase;
     bool needSeparator = false;
     for (uint i = 0; i < sizeof(T) * 8; ++i) {
         if (flags.testFlag(T(1 << i))) {
             if (needSeparator)
-                debug.nospace() << '|';
+                debug << '|';
             else
                 needSeparator = true;
-            debug.nospace() << "0x" << QByteArray::number(typename QFlags<T>::Int(1) << i, 16).constData();
+            debug << (typename QFlags<T>::Int(1) << i);
         }
     }
     debug << ')';
-    debug.setAutoInsertSpaces(oldSetting);
-    return debug.maybeSpace();
+    return debug;
 }
 
 QT_END_NAMESPACE
diff --git a/src/corelib/io/qdir.cpp b/src/corelib/io/qdir.cpp
index ec7d89fa87..a5e189a825 100644
--- a/src/corelib/io/qdir.cpp
+++ b/src/corelib/io/qdir.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -760,9 +752,13 @@ QString QDir::relativeFilePath(const QString &fileName) const
 #endif
 
     QString result;
+#if defined(Q_OS_WIN)
     QStringList dirElts = dir.split(QLatin1Char('/'), QString::SkipEmptyParts);
     QStringList fileElts = file.split(QLatin1Char('/'), QString::SkipEmptyParts);
-
+#else
+    QVector<QStringRef> dirElts = dir.splitRef(QLatin1Char('/'), QString::SkipEmptyParts);
+    QVector<QStringRef> fileElts = file.splitRef(QLatin1Char('/'), QString::SkipEmptyParts);
+#endif
     int i = 0;
     while (i < dirElts.size() && i < fileElts.size() &&
 #if defined(Q_OS_WIN)
@@ -2022,106 +2018,120 @@ bool QDir::match(const QString &filter, const QString &fileName)
     This method is shared with QUrl, so it doesn't deal with QDir::separator(),
     nor does it remove the trailing slash, if any.
 */
-QString qt_normalizePathSegments(const QString &name, bool allowUncPaths)
+Q_AUTOTEST_EXPORT QString qt_normalizePathSegments(const QString &name, bool allowUncPaths)
 {
-    int used = 0, levels = 0;
     const int len = name.length();
+
+    if (len == 0)
+        return name;
+
+    int i = len - 1;
     QVarLengthArray<QChar> outVector(len);
+    int used = len;
     QChar *out = outVector.data();
-
     const QChar *p = name.unicode();
-    for (int i = 0, last = -1, iwrite = 0; i < len; ++i) {
-        if (p[i] == QLatin1Char('/')) {
-            while (i+1 < len && p[i+1] == QLatin1Char('/')) {
-                if (allowUncPaths && i == 0)
-                    break;
-                i++;
-            }
-            bool eaten = false;
-            if (i+1 < len && p[i+1] == QLatin1Char('.')) {
-                int dotcount = 1;
-                if (i+2 < len && p[i+2] == QLatin1Char('.'))
-                    dotcount++;
-                if (i == len - dotcount - 1) {
-                    if (dotcount == 1) {
-                        break;
-                    } else if (levels) {
-                        if (last == -1) {
-                            for (int i2 = iwrite-1; i2 >= 0; i2--) {
-                                if (out[i2] == QLatin1Char('/')) {
-                                    last = i2;
-                                    break;
-                                }
-                            }
-                        }
-                        used -= iwrite - last - 1;
-                        break;
-                    }
-                } else if (p[i+dotcount+1] == QLatin1Char('/')) {
-                    if (dotcount == 2 && levels) {
-                        if (last == -1 || iwrite - last == 1) {
-                            for (int i2 = (last == -1) ? (iwrite-1) : (last-1); i2 >= 0; i2--) {
-                                if (out[i2] == QLatin1Char('/')) {
-                                    eaten = true;
-                                    last = i2;
-                                    break;
-                                }
-                            }
-                        } else {
-                            eaten = true;
-                        }
-                        if (eaten) {
-                            levels--;
-                            used -= iwrite - last;
-                            iwrite = last;
-                            last = -1;
-                        }
-                    } else if (dotcount == 2 && i > 0 && p[i - 1] != QLatin1Char('.')) {
-                        eaten = true;
-                        used -= iwrite - qMax(0, last);
-                        iwrite = qMax(0, last);
-                        last = -1;
-                        ++i;
-                    } else if (dotcount == 1) {
-                        eaten = true;
-                    }
-                    if (eaten)
-                        i += dotcount;
-                } else {
-                    levels++;
-                }
-            } else if (last != -1 && iwrite - last == 1) {
-#if defined(Q_OS_WIN)
-                eaten = (iwrite > 2);
-#else
-                eaten = true;
+    const QChar *prefix = p;
+    int up = 0;
+
+    int prefixLength = 0;
+
+    if (allowUncPaths && len >= 2 && p[1].unicode() == '/' && p[0].unicode() == '/') {
+        // starts with double slash
+        prefixLength = 2;
+#ifdef Q_OS_WIN
+    } else if (len >= 2 && p[1].unicode() == ':') {
+        // remember the drive letter
+        prefixLength = (len > 2 && p[2].unicode() == '/') ? 3 : 2;
 #endif
-                last = -1;
-            } else {
-                levels++;
-            }
-            if (!eaten)
-                last = i - (i - iwrite);
-            else
-                continue;
-        } else if (!i && p[i] == QLatin1Char('.')) {
-            int dotcount = 1;
-            if (len >= 1 && p[1] == QLatin1Char('.'))
-                dotcount++;
-            if (len >= dotcount && p[dotcount] == QLatin1Char('/')) {
-                if (dotcount == 1) {
-                    i++;
-                    while (i+1 < len-1 && p[i+1] == QLatin1Char('/'))
-                        i++;
-                    continue;
-                }
+    } else if (p[0].unicode() == '/') {
+        prefixLength = 1;
+    }
+    p += prefixLength;
+    i -= prefixLength;
+
+    // replicate trailing slash (i > 0 checks for emptiness of input string p)
+    if (i > 0 && p[i].unicode() == '/') {
+        out[--used].unicode() = '/';
+        --i;
+    }
+
+    while (i >= 0) {
+        // remove trailing slashes
+        if (p[i].unicode() == '/') {
+            --i;
+            continue;
+        }
+
+        // remove current directory
+        if (p[i].unicode() == '.' && (i == 0 || p[i-1].unicode() == '/')) {
+            --i;
+            continue;
+        }
+
+        // detect up dir
+        if (i >= 1 && p[i].unicode() == '.' && p[i-1].unicode() == '.'
+                && (i == 1 || (i >= 2 && p[i-2].unicode() == '/'))) {
+            ++up;
+            i -= 2;
+            continue;
+        }
+
+        // prepend a slash before copying when not empty
+        if (!up && used != len && out[used].unicode() != '/')
+            out[--used] = QLatin1Char('/');
+
+        // skip or copy
+        while (i >= 0) {
+            if (p[i].unicode() == '/') { // do not copy slashes
+                --i;
+                break;
             }
+
+            // actual copy
+            if (!up)
+                out[--used] = p[i];
+            --i;
+        }
+
+        // decrement up after copying/skipping
+        if (up)
+            --up;
+    }
+
+    // add remaining '..'
+    while (up) {
+        if (used != len && out[used].unicode() != '/') // is not empty and there isn't already a '/'
+            out[--used] = QLatin1Char('/');
+        out[--used] = QLatin1Char('.');
+        out[--used] = QLatin1Char('.');
+        --up;
+    }
+
+    bool isEmpty = used == len;
+
+    if (prefixLength) {
+        if (!isEmpty && out[used].unicode() == '/') {
+            // Eventhough there is a prefix the out string is a slash. This happens, if the input
+            // string only consists of a prefix followed by one or more slashes. Just skip the slash.
+            ++used;
+        }
+        for (int i = prefixLength - 1; i >= 0; --i)
+            out[--used] = prefix[i];
+    } else {
+        if (isEmpty) {
+            // After resolving the input path, the resulting string is empty (e.g. "foo/.."). Return
+            // a dot in that case.
+            out[--used] = QLatin1Char('.');
+        } else if (out[used].unicode() == '/') {
+            // After parsing the input string, out only contains a slash. That happens whenever all
+            // parts are resolved and there is a trailing slash ("./" or "foo/../" for example).
+            // Prepend a dot to have the correct return value.
+            out[--used] = QLatin1Char('.');
         }
-        out[iwrite++] = p[i];
-        used++;
     }
 
-    QString ret = (used == len ? name : QString(out, used));
+    // If path was not modified return the original value
+    QString ret = (used == 0 ? name : QString(out + used, len - used));
     return ret;
 }
 
diff --git a/src/corelib/io/qdir.h b/src/corelib/io/qdir.h
index dbb6d93d2e..6b2029ff7e 100644
--- a/src/corelib/io/qdir.h
+++ b/src/corelib/io/qdir.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdir_p.h b/src/corelib/io/qdir_p.h
index 4d2f25f9ba..147adc0a3a 100644
--- a/src/corelib/io/qdir_p.h
+++ b/src/corelib/io/qdir_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdiriterator.cpp b/src/corelib/io/qdiriterator.cpp
index 79cdec9674..80c2200bb0 100644
--- a/src/corelib/io/qdiriterator.cpp
+++ b/src/corelib/io/qdiriterator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qdiriterator.h b/src/corelib/io/qdiriterator.h
index 4a96005570..f873c80f68 100644
--- a/src/corelib/io/qdiriterator.h
+++ b/src/corelib/io/qdiriterator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfile.cpp b/src/corelib/io/qfile.cpp
index feecbd0281..6fe4c2455b 100644
--- a/src/corelib/io/qfile.cpp
+++ b/src/corelib/io/qfile.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfile.h b/src/corelib/io/qfile.h
index 2e75e29995..75f246da96 100644
--- a/src/corelib/io/qfile.h
+++ b/src/corelib/io/qfile.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfile_p.h b/src/corelib/io/qfile_p.h
index 05063250a5..705fe16615 100644
--- a/src/corelib/io/qfile_p.h
+++ b/src/corelib/io/qfile_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfiledevice.cpp b/src/corelib/io/qfiledevice.cpp
index f9a79cdca0..8691a44d8d 100644
--- a/src/corelib/io/qfiledevice.cpp
+++ b/src/corelib/io/qfiledevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -680,6 +672,13 @@ bool QFileDevice::setPermissions(Permissions permissions)
     function.
 
     \value NoOptions        No options.
+    \value MapPrivateOption The mapped memory will be private, so any
+    modifications will not be visible to other processes and will not
+    be written to disk.  Any such modifications will be lost when the
+    memory is unmapped.  It is unspecified whether modifications made
+    to the file made after the mapping is created will be visible through
+    the mapped memory.  This flag is not supported on Windows CE.
+    This enum value was introduced in Qt 5.4.
 */
 
 /*!
@@ -689,6 +688,10 @@ bool QFileDevice::setPermissions(Permissions permissions)
     or a new file is opened with this object, any maps that have not been
     unmapped will automatically be unmapped.
 
+    The mapping will have the same open mode as the file (read and/or write),
+    except when using MapPrivateOption, in which case it is always possible
+    to write to the mapped memory.
+
     Any mapping options can be passed through \a flags.
 
     Returns a pointer to the memory or 0 if there is an error.
diff --git a/src/corelib/io/qfiledevice.h b/src/corelib/io/qfiledevice.h
index fc2779086a..b79b0055fa 100644
--- a/src/corelib/io/qfiledevice.h
+++ b/src/corelib/io/qfiledevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -112,8 +104,10 @@ public:
     virtual Permissions permissions() const;
     virtual bool setPermissions(Permissions permissionSpec);
 
+    // ### Qt 6: rename to MemoryMapFlag & make it a QFlags
     enum MemoryMapFlags {
-        NoOptions = 0
+        NoOptions = 0,
+        MapPrivateOption = 0x0001
     };
 
     uchar *map(qint64 offset, qint64 size, MemoryMapFlags flags = NoOptions);
diff --git a/src/corelib/io/qfiledevice_p.h b/src/corelib/io/qfiledevice_p.h
index 79d8427c0d..891a5e4be4 100644
--- a/src/corelib/io/qfiledevice_p.h
+++ b/src/corelib/io/qfiledevice_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfileinfo.cpp b/src/corelib/io/qfileinfo.cpp
index 210bb3898c..98c36f4a82 100644
--- a/src/corelib/io/qfileinfo.cpp
+++ b/src/corelib/io/qfileinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfileinfo.h b/src/corelib/io/qfileinfo.h
index 0f18261943..68dd3b9282 100644
--- a/src/corelib/io/qfileinfo.h
+++ b/src/corelib/io/qfileinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfileinfo_p.h b/src/corelib/io/qfileinfo_p.h
index 47359a55ce..257111a566 100644
--- a/src/corelib/io/qfileinfo_p.h
+++ b/src/corelib/io/qfileinfo_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfileselector.cpp b/src/corelib/io/qfileselector.cpp
index 0fa1f02f5c..5d1d5dfe23 100644
--- a/src/corelib/io/qfileselector.cpp
+++ b/src/corelib/io/qfileselector.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,10 +43,6 @@
 #include <QtCore/QLocale>
 #include <QtCore/QDebug>
 
-#ifdef Q_OS_UNIX
-#include <sys/utsname.h>
-#endif
-
 QT_BEGIN_NAMESPACE
 
 //Environment variable to allow tooling full control of file selectors
@@ -152,7 +140,7 @@ QFileSelectorPrivate::QFileSelectorPrivate()
     deployment step as an optimization. As selectors come with a performance cost, it is
     recommended to avoid their use in circumstances involving performance-critical code.
 
-    \section1 Adding selectors
+    \section1 Adding Selectors
 
     Selectors normally available are
     \list
@@ -170,7 +158,7 @@ QFileSelectorPrivate::QFileSelectorPrivate()
     future calls to select(). If the extra selectors list has been changed, calls to select() will
     use the new list and may return differently.
 
-    \section1 Conflict resolution when multiple selectors apply
+    \section1 Conflict Resolution when Multiple Selectors Apply
 
     When multiple selectors could be applied to the same file, the first matching selector is chosen.
     The order selectors are checked in are:
@@ -360,6 +348,7 @@ void QFileSelectorPrivate::updateSelectors()
 
 QStringList QFileSelectorPrivate::platformSelectors()
 {
+    // similar, but not identical to QSysInfo::osType
     QStringList ret;
 #if defined(Q_OS_WIN)
     ret << QStringLiteral("windows");
@@ -390,9 +379,7 @@ QStringList QFileSelectorPrivate::platformSelectors()
     ret << QStringLiteral("osx");
 #    endif
 #  else
-    struct utsname u;
-    if (uname(&u) != -1)
-        ret << QString::fromLatin1(u.sysname).toLower();
+    ret << QSysInfo::kernelType();
 #  endif
 #endif
     return ret;
diff --git a/src/corelib/io/qfileselector.h b/src/corelib/io/qfileselector.h
index cb5f71faae..8cafdfcac5 100644
--- a/src/corelib/io/qfileselector.h
+++ b/src/corelib/io/qfileselector.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfileselector_p.h b/src/corelib/io/qfileselector_p.h
index db118545c4..5fd1db0db8 100644
--- a/src/corelib/io/qfileselector_p.h
+++ b/src/corelib/io/qfileselector_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemengine.cpp b/src/corelib/io/qfilesystemengine.cpp
index 8b6ceebc62..b06017e57f 100644
--- a/src/corelib/io/qfilesystemengine.cpp
+++ b/src/corelib/io/qfilesystemengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemengine_p.h b/src/corelib/io/qfilesystemengine_p.h
index 5719629958..44a18be55e 100644
--- a/src/corelib/io/qfilesystemengine_p.h
+++ b/src/corelib/io/qfilesystemengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemengine_unix.cpp b/src/corelib/io/qfilesystemengine_unix.cpp
index eabedaa80a..cd42aff35c 100644
--- a/src/corelib/io/qfilesystemengine_unix.cpp
+++ b/src/corelib/io/qfilesystemengine_unix.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemengine_win.cpp b/src/corelib/io/qfilesystemengine_win.cpp
index 1d79136422..ca189bea19 100644
--- a/src/corelib/io/qfilesystemengine_win.cpp
+++ b/src/corelib/io/qfilesystemengine_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystementry.cpp b/src/corelib/io/qfilesystementry.cpp
index 5365ca9bcc..8e48dd1630 100644
--- a/src/corelib/io/qfilesystementry.cpp
+++ b/src/corelib/io/qfilesystementry.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystementry_p.h b/src/corelib/io/qfilesystementry_p.h
index ced6120030..52e8433ce8 100644
--- a/src/corelib/io/qfilesystementry_p.h
+++ b/src/corelib/io/qfilesystementry_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemiterator_p.h b/src/corelib/io/qfilesystemiterator_p.h
index 18a9c2dbda..c857c190c2 100644
--- a/src/corelib/io/qfilesystemiterator_p.h
+++ b/src/corelib/io/qfilesystemiterator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemiterator_unix.cpp b/src/corelib/io/qfilesystemiterator_unix.cpp
index 0f9bbd8a29..29f8bbcacd 100644
--- a/src/corelib/io/qfilesystemiterator_unix.cpp
+++ b/src/corelib/io/qfilesystemiterator_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemiterator_win.cpp b/src/corelib/io/qfilesystemiterator_win.cpp
index dda96bd45a..18445dd1b6 100644
--- a/src/corelib/io/qfilesystemiterator_win.cpp
+++ b/src/corelib/io/qfilesystemiterator_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemmetadata_p.h b/src/corelib/io/qfilesystemmetadata_p.h
index de79ec32d3..cf1218cb41 100644
--- a/src/corelib/io/qfilesystemmetadata_p.h
+++ b/src/corelib/io/qfilesystemmetadata_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher.cpp b/src/corelib/io/qfilesystemwatcher.cpp
index 8cc6ad0552..4bca8d90a0 100644
--- a/src/corelib/io/qfilesystemwatcher.cpp
+++ b/src/corelib/io/qfilesystemwatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher.h b/src/corelib/io/qfilesystemwatcher.h
index 5a326075ba..30a0b2cf08 100644
--- a/src/corelib/io/qfilesystemwatcher.h
+++ b/src/corelib/io/qfilesystemwatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_fsevents.mm b/src/corelib/io/qfilesystemwatcher_fsevents.mm
index e713769735..eebca1cfb0 100644
--- a/src/corelib/io/qfilesystemwatcher_fsevents.mm
+++ b/src/corelib/io/qfilesystemwatcher_fsevents.mm
@@ -149,6 +149,7 @@ bool QFseventsFileSystemWatcherEngine::checkDir(DirsByName::iterator &it)
         }
         if (dirChanged)
             emit emitDirectoryChanged(info.origPath, false);
+        ++it;
     }
 
     return needsRestart;
diff --git a/src/corelib/io/qfilesystemwatcher_fsevents_p.h b/src/corelib/io/qfilesystemwatcher_fsevents_p.h
index 2de2bf4f18..752a8b98d2 100644
--- a/src/corelib/io/qfilesystemwatcher_fsevents_p.h
+++ b/src/corelib/io/qfilesystemwatcher_fsevents_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_inotify.cpp b/src/corelib/io/qfilesystemwatcher_inotify.cpp
index 3031c7a27e..a3fafaef03 100644
--- a/src/corelib/io/qfilesystemwatcher_inotify.cpp
+++ b/src/corelib/io/qfilesystemwatcher_inotify.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_inotify_p.h b/src/corelib/io/qfilesystemwatcher_inotify_p.h
index d02f04eed6..a9bc8486dc 100644
--- a/src/corelib/io/qfilesystemwatcher_inotify_p.h
+++ b/src/corelib/io/qfilesystemwatcher_inotify_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_kqueue.cpp b/src/corelib/io/qfilesystemwatcher_kqueue.cpp
index ff6d0a0f12..d39d312872 100644
--- a/src/corelib/io/qfilesystemwatcher_kqueue.cpp
+++ b/src/corelib/io/qfilesystemwatcher_kqueue.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_kqueue_p.h b/src/corelib/io/qfilesystemwatcher_kqueue_p.h
index 6b7c8e8de2..31c7a0193d 100644
--- a/src/corelib/io/qfilesystemwatcher_kqueue_p.h
+++ b/src/corelib/io/qfilesystemwatcher_kqueue_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_p.h b/src/corelib/io/qfilesystemwatcher_p.h
index bf7c73c90e..a784a22154 100644
--- a/src/corelib/io/qfilesystemwatcher_p.h
+++ b/src/corelib/io/qfilesystemwatcher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_polling.cpp b/src/corelib/io/qfilesystemwatcher_polling.cpp
index 401f95ae82..3503ca6540 100644
--- a/src/corelib/io/qfilesystemwatcher_polling.cpp
+++ b/src/corelib/io/qfilesystemwatcher_polling.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_polling_p.h b/src/corelib/io/qfilesystemwatcher_polling_p.h
index fde8d94a6c..f39d72d5d8 100644
--- a/src/corelib/io/qfilesystemwatcher_polling_p.h
+++ b/src/corelib/io/qfilesystemwatcher_polling_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_win.cpp b/src/corelib/io/qfilesystemwatcher_win.cpp
index bb16df04ad..c7c5cc9e15 100644
--- a/src/corelib/io/qfilesystemwatcher_win.cpp
+++ b/src/corelib/io/qfilesystemwatcher_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfilesystemwatcher_win_p.h b/src/corelib/io/qfilesystemwatcher_win_p.h
index 20dfe433ec..1b4d75c594 100644
--- a/src/corelib/io/qfilesystemwatcher_win_p.h
+++ b/src/corelib/io/qfilesystemwatcher_win_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfsfileengine.cpp b/src/corelib/io/qfsfileengine.cpp
index bed77678fa..42250b629d 100644
--- a/src/corelib/io/qfsfileengine.cpp
+++ b/src/corelib/io/qfsfileengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -173,9 +165,7 @@ QFSFileEngine::~QFSFileEngine()
             QT_CLOSE(d->fd);
         }
     }
-    QList<uchar*> keys = d->maps.keys();
-    for (int i = 0; i < keys.count(); ++i)
-        unmap(keys.at(i));
+    d->unmapAll();
 }
 
 /*!
@@ -456,6 +446,18 @@ qint64 QFSFileEngine::size() const
     return d->nativeSize();
 }
 
+/*!
+    \internal
+*/
+void QFSFileEnginePrivate::unmapAll()
+{
+    if (!maps.isEmpty()) {
+        const QList<uchar*> keys = maps.keys(); // Make a copy since unmap() modifies the map.
+        for (int i = 0; i < keys.count(); ++i)
+            unmap(keys.at(i));
+    }
+}
+
 #ifndef Q_OS_WIN
 /*!
     \internal
@@ -610,8 +612,7 @@ qint64 QFSFileEnginePrivate::readFdFh(char *data, qint64 len)
 #endif
         do {
             result = QT_READ(fd, data + readBytes, size_t(len - readBytes));
-        } while ((result == -1 && errno == EINTR)
-                || (result > 0 && (readBytes += result) < len));
+        } while (result > 0 && (readBytes += result) < len);
 
         eof = !(result == -1);
     }
@@ -728,8 +729,7 @@ qint64 QFSFileEnginePrivate::writeFdFh(const char *data, qint64 len)
 #endif
         do {
             result = QT_WRITE(fd, data + writtenBytes, size_t(len - writtenBytes));
-        } while ((result == -1 && errno == EINTR)
-                || (result > 0 && (writtenBytes += result) < len));
+        } while (result > 0 && (writtenBytes += result) < len);
     }
 
     if (len &&  writtenBytes == 0) {
diff --git a/src/corelib/io/qfsfileengine_iterator.cpp b/src/corelib/io/qfsfileengine_iterator.cpp
index a2ac1b2916..f4a1906b4c 100644
--- a/src/corelib/io/qfsfileengine_iterator.cpp
+++ b/src/corelib/io/qfsfileengine_iterator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfsfileengine_iterator_p.h b/src/corelib/io/qfsfileengine_iterator_p.h
index 924bf6015f..cc5b36fc57 100644
--- a/src/corelib/io/qfsfileengine_iterator_p.h
+++ b/src/corelib/io/qfsfileengine_iterator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qfsfileengine_p.h b/src/corelib/io/qfsfileengine_p.h
index 21f38fea1d..5d5a29243e 100644
--- a/src/corelib/io/qfsfileengine_p.h
+++ b/src/corelib/io/qfsfileengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -175,6 +167,7 @@ public:
 
     uchar *map(qint64 offset, qint64 size, QFile::MemoryMapFlags flags);
     bool unmap(uchar *ptr);
+    void unmapAll();
 
     mutable QFileSystemMetaData metaData;
 
diff --git a/src/corelib/io/qfsfileengine_unix.cpp b/src/corelib/io/qfsfileengine_unix.cpp
index 064a1a511f..5d8c939859 100644
--- a/src/corelib/io/qfsfileengine_unix.cpp
+++ b/src/corelib/io/qfsfileengine_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -713,6 +705,12 @@ uchar *QFSFileEnginePrivate::map(qint64 offset, qint64 size, QFile::MemoryMapFla
     if (openMode & QIODevice::ReadOnly) access |= PROT_READ;
     if (openMode & QIODevice::WriteOnly) access |= PROT_WRITE;
 
+    int sharemode = MAP_SHARED;
+    if (flags & QFileDevice::MapPrivateOption) {
+        sharemode = MAP_PRIVATE;
+        access |= PROT_WRITE;
+    }
+
 #if defined(Q_OS_INTEGRITY)
     int pageSize = sysconf(_SC_PAGESIZE);
 #else
@@ -730,7 +728,7 @@ uchar *QFSFileEnginePrivate::map(qint64 offset, qint64 size, QFile::MemoryMapFla
     realOffset &= ~(QT_OFF_T(pageSize - 1));
 
     void *mapAddress = QT_MMAP((void*)0, realSize,
-                   access, MAP_SHARED, nativeHandle(), realOffset);
+                   access, sharemode, nativeHandle(), realOffset);
     if (MAP_FAILED != mapAddress) {
         uchar *address = extra + static_cast<uchar*>(mapAddress);
         maps[address] = QPair<int,size_t>(extra, realSize);
diff --git a/src/corelib/io/qfsfileengine_win.cpp b/src/corelib/io/qfsfileengine_win.cpp
index fb4107b95d..a1ab8fc0f8 100644
--- a/src/corelib/io/qfsfileengine_win.cpp
+++ b/src/corelib/io/qfsfileengine_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -369,15 +361,15 @@ qint64 QFSFileEnginePrivate::nativeRead(char *data, qint64 maxlen)
     if (fileHandle == INVALID_HANDLE_VALUE)
         return -1;
 
-    DWORD bytesToRead = DWORD(maxlen); // <- lossy
+    qint64 bytesToRead = maxlen;
 
     // Reading on Windows fails with ERROR_NO_SYSTEM_RESOURCES when
     // the chunks are too large, so we limit the block size to 32MB.
-    static const DWORD maxBlockSize = 32 * 1024 * 1024;
+    static const qint64 maxBlockSize = 32 * 1024 * 1024;
 
     qint64 totalRead = 0;
     do {
-        DWORD blockSize = qMin<DWORD>(bytesToRead, maxBlockSize);
+        DWORD blockSize = DWORD(qMin(bytesToRead, maxBlockSize));
         DWORD bytesRead;
         if (!ReadFile(fileHandle, data + totalRead, blockSize, &bytesRead, NULL)) {
             if (totalRead == 0) {
@@ -392,7 +384,7 @@ qint64 QFSFileEnginePrivate::nativeRead(char *data, qint64 maxlen)
         totalRead += bytesRead;
         bytesToRead -= bytesRead;
     } while (totalRead < maxlen);
-    return qint64(totalRead);
+    return totalRead;
 }
 
 /*
@@ -965,6 +957,21 @@ uchar *QFSFileEnginePrivate::map(qint64 offset, qint64 size,
         return 0;
     }
 
+    // check/setup args to map
+    DWORD access = 0;
+    if (flags & QFileDevice::MapPrivateOption) {
+#ifdef FILE_MAP_COPY
+        access = FILE_MAP_COPY;
+#else
+        q->setError(QFile::UnspecifiedError, "MapPrivateOption unsupported");
+        return 0;
+#endif
+    } else if (openMode & QIODevice::WriteOnly) {
+        access = FILE_MAP_WRITE;
+    } else if (openMode & QIODevice::ReadOnly) {
+        access = FILE_MAP_READ;
+    }
+
     if (mapHandle == NULL) {
         // get handle to the file
         HANDLE handle = fileHandle;
@@ -1011,11 +1018,6 @@ uchar *QFSFileEnginePrivate::map(qint64 offset, qint64 size,
         }
     }
 
-    // setup args to map
-    DWORD access = 0;
-    if (openMode & QIODevice::ReadOnly) access = FILE_MAP_READ;
-    if (openMode & QIODevice::WriteOnly) access = FILE_MAP_WRITE;
-
     DWORD offsetHi = offset >> 32;
     DWORD offsetLo = offset & Q_UINT64_C(0xffffffff);
     SYSTEM_INFO sysinfo;
diff --git a/src/corelib/io/qiodevice.cpp b/src/corelib/io/qiodevice.cpp
index 7b0557a497..89209e6118 100644
--- a/src/corelib/io/qiodevice.cpp
+++ b/src/corelib/io/qiodevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -832,7 +824,7 @@ qint64 QIODevice::read(char *data, qint64 maxSize)
                 // In buffered mode, we try to fill up the QIODevice buffer before
                 // we do anything else.
                 // buffer is empty at this point, try to fill it
-                int bytesToBuffer = QIODEVICE_BUFFERSIZE;
+                const int bytesToBuffer = QIODEVICE_BUFFERSIZE;
                 char *writePointer = d->buffer.reserve(bytesToBuffer);
 
                 // Make sure the device is positioned correctly.
@@ -1013,6 +1005,8 @@ QByteArray QIODevice::readAll()
 
     // flush internal read buffer
     if (!(d->openMode & Text) && !d->buffer.isEmpty()) {
+        if (d->buffer.size() >= INT_MAX)
+            return QByteArray();
         result = d->buffer.readAll();
         readBytes = result.size();
         d->pos += readBytes;
@@ -1031,6 +1025,8 @@ QByteArray QIODevice::readAll()
     } else {
         // Read it all in one go.
         // If resize fails, don't read anything.
+        if (readBytes + theSize - d->pos > INT_MAX)
+            return QByteArray();
         result.resize(int(readBytes + theSize - d->pos));
         readBytes += read(result.data() + readBytes, result.size() - readBytes);
     }
diff --git a/src/corelib/io/qiodevice.h b/src/corelib/io/qiodevice.h
index cdc90f21bb..026e049b90 100644
--- a/src/corelib/io/qiodevice.h
+++ b/src/corelib/io/qiodevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qiodevice_p.h b/src/corelib/io/qiodevice_p.h
index faf64e2cf1..10d92a896d 100644
--- a/src/corelib/io/qiodevice_p.h
+++ b/src/corelib/io/qiodevice_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -84,13 +76,13 @@ public:
         first = buf;
         capacity = 0;
     }
-    int size() const {
+    qint64 size() const {
         return len;
     }
     bool isEmpty() const {
         return len == 0;
     }
-    void skip(int n) {
+    void skip(qint64 n) {
         if (n >= len) {
             clear();
         } else {
@@ -106,14 +98,14 @@ public:
         first++;
         return ch;
     }
-    int read(char* target, int size) {
+    int read(char* target, qint64 size) {
         int r = qMin(size, len);
         memcpy(target, first, r);
         len -= r;
         first += r;
         return r;
     }
-    int peek(char* target, int size) {
+    int peek(char* target, qint64 size) {
         int r = qMin(size, len);
         memcpy(target, first, r);
         return r;
@@ -124,7 +116,7 @@ public:
         len += size;
         return writePtr;
     }
-    void chop(int size) {
+    void chop(qint64 size) {
         if (size >= len) {
             clear();
         } else {
@@ -136,7 +128,7 @@ public:
         clear();
         return retVal;
     }
-    int readLine(char* target, int size) {
+    int readLine(char* target, qint64 size) {
         int r = qMin(size, len);
         char* eol = static_cast<char*>(memchr(first, '\n', r));
         if (eol)
@@ -158,7 +150,7 @@ public:
         len++;
         *first = c;
     }
-    void ungetBlock(const char* block, int size) {
+    void ungetBlock(const char* block, qint64 size) {
         if ((first - buf) < size) {
             // underflow, the existing valid data needs to move to the end of the (potentially bigger) buffer
             makeSpace(len + size, freeSpaceAtStart);
@@ -191,7 +183,7 @@ private:
 
 private:
     // length of the unread data
-    int len;
+    qint64 len;
     // start of the unread data
     char* first;
     // the allocated buffer
diff --git a/src/corelib/io/qipaddress.cpp b/src/corelib/io/qipaddress.cpp
index 334c239c91..44da22489d 100644
--- a/src/corelib/io/qipaddress.cpp
+++ b/src/corelib/io/qipaddress.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qipaddress_p.h b/src/corelib/io/qipaddress_p.h
index 3059a1c205..5c5539e47f 100644
--- a/src/corelib/io/qipaddress_p.h
+++ b/src/corelib/io/qipaddress_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qlockfile.cpp b/src/corelib/io/qlockfile.cpp
index e24a7e85a8..18a782a8f3 100644
--- a/src/corelib/io/qlockfile.cpp
+++ b/src/corelib/io/qlockfile.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qlockfile.h b/src/corelib/io/qlockfile.h
index d46f07ab7b..a35eee521f 100644
--- a/src/corelib/io/qlockfile.h
+++ b/src/corelib/io/qlockfile.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qlockfile_p.h b/src/corelib/io/qlockfile_p.h
index e08f86cab9..ec36733ee7 100644
--- a/src/corelib/io/qlockfile_p.h
+++ b/src/corelib/io/qlockfile_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qlockfile_unix.cpp b/src/corelib/io/qlockfile_unix.cpp
index d1ef9c1770..2fe93f0af6 100644
--- a/src/corelib/io/qlockfile_unix.cpp
+++ b/src/corelib/io/qlockfile_unix.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -206,7 +198,10 @@ void QLockFile::unlock()
         return;
     close(d->fileHandle);
     d->fileHandle = -1;
-    QFile::remove(d->fileName);
+    if (!QFile::remove(d->fileName)) {
+        qWarning() << "Could not remove our own lock file" << d->fileName << "maybe permissions changed meanwhile?";
+        // This is bad because other users of this lock file will now have to wait for the stale-lock-timeout...
+    }
     d->lockError = QLockFile::NoError;
     d->isLocked = false;
 }
diff --git a/src/corelib/io/qlockfile_win.cpp b/src/corelib/io/qlockfile_win.cpp
index 28f6b02a64..f9f29090d7 100644
--- a/src/corelib/io/qlockfile_win.cpp
+++ b/src/corelib/io/qlockfile_win.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,9 +39,15 @@
 #include "QtCore/qfileinfo.h"
 #include "QtCore/qdatetime.h"
 #include "QtCore/qdebug.h"
+#include "QtCore/qthread.h"
 
 QT_BEGIN_NAMESPACE
 
+static inline QByteArray localHostName()
+{
+    return qgetenv("COMPUTERNAME");
+}
+
 QLockFile::LockError QLockFilePrivate::tryLock_sys()
 {
     const QFileSystemEntry fileEntry(fileName);
@@ -98,7 +96,7 @@ QLockFile::LockError QLockFilePrivate::tryLock_sys()
     fileData += '\n';
     fileData += qAppName().toUtf8();
     fileData += '\n';
-    //fileData += localHostname(); // gethostname requires winsock init, see QHostInfo...
+    fileData += localHostName();
     fileData += '\n';
     DWORD bytesWritten = 0;
     QLockFile::LockError error = QLockFile::NoError;
@@ -123,14 +121,16 @@ bool QLockFilePrivate::isApparentlyStale() const
     // On WinRT there seems to be no way of obtaining information about other
     // processes due to sandboxing
 #ifndef Q_OS_WINRT
-    HANDLE procHandle = ::OpenProcess(PROCESS_QUERY_INFORMATION, FALSE, pid);
-    if (!procHandle)
-        return true;
-    // We got a handle but check if process is still alive
-    DWORD dwR = ::WaitForSingleObject(procHandle, 0);
-    ::CloseHandle(procHandle);
-    if (dwR == WAIT_TIMEOUT)
-        return true;
+    if (hostname == QString::fromLocal8Bit(localHostName())) {
+        HANDLE procHandle = ::OpenProcess(PROCESS_QUERY_INFORMATION, FALSE, pid);
+        if (!procHandle)
+            return true;
+        // We got a handle but check if process is still alive
+        DWORD dwR = ::WaitForSingleObject(procHandle, 0);
+        ::CloseHandle(procHandle);
+        if (dwR == WAIT_TIMEOUT)
+            return true;
+    }
 #endif // !Q_OS_WINRT
     const qint64 age = QFileInfo(fileName).lastModified().msecsTo(QDateTime::currentDateTime());
     return staleLockTime > 0 && age > staleLockTime;
@@ -142,7 +142,16 @@ void QLockFile::unlock()
      if (!d->isLocked)
         return;
      CloseHandle(d->fileHandle);
-     QFile::remove(d->fileName);
+     int attempts = 0;
+     static const int maxAttempts = 500; // 500ms
+     while (!QFile::remove(d->fileName) && ++attempts < maxAttempts) {
+         // Someone is reading the lock file right now (on Windows this prevents deleting it).
+         QThread::msleep(1);
+     }
+     if (attempts == maxAttempts) {
+        qWarning() << "Could not remove our own lock file" << d->fileName << ". Either other users of the lock file are reading it constantly for 500 ms, or we (no longer) have permissions to delete the file";
+        // This is bad because other users of this lock file will now have to wait for the stale-lock-timeout...
+     }
      d->lockError = QLockFile::NoError;
      d->isLocked = false;
 }
diff --git a/src/corelib/io/qloggingcategory.cpp b/src/corelib/io/qloggingcategory.cpp
index 07245ddea2..37503e032c 100644
--- a/src/corelib/io/qloggingcategory.cpp
+++ b/src/corelib/io/qloggingcategory.cpp
@@ -1,46 +1,37 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qloggingcategory.h"
-#include "qloggingcategory_p.h"
 #include "qloggingregistry_p.h"
 
 QT_BEGIN_NAMESPACE
@@ -80,14 +71,14 @@ static void setBoolLane(QBasicAtomicInt *atomic, bool enable, int shift)
     boundaries, nor to manipulate the objects directly, nor to inherit from
     QLoggingCategory.
 
-    \section1 Creating category objects
+    \section1 Creating Category Objects
 
-    The Q_LOGGING_CATEGORY() and the Q_DECLARE_LOGGING_CATEGORY() macros
+    The Q_DECLARE_LOGGING_CATEGORY() and Q_LOGGING_CATEGORY() macros
     conveniently declare and create QLoggingCategory objects:
 
     \snippet qloggingcategory/main.cpp 1
 
-    \section1 Checking category configuration
+    \section1 Checking Category Configuration
 
     QLoggingCategory provides \l isDebugEnabled(), \l isWarningEnabled(),
     \l isCriticalEnabled(), as well as \l isEnabled()
@@ -99,15 +90,23 @@ static void setBoolLane(QBasicAtomicInt *atomic, bool enable, int shift)
 
     \snippet qloggingcategory/main.cpp 4
 
-    \section1 Default category configuration
+    \section1 Default Category Configuration
+
+    Both the QLoggingCategory constructor and the Q_LOGGING_CATEGORY() macro
+    accept an optional QtMsgType argument, which disables all message types with
+    a lower severity. That is, a category declared with
+
+    \snippet qloggingcategory/main.cpp 5
+
+    will log messages of type \c QtWarningMsg, \c QtCriticalMsg, \c QtFatalMsg, but will
+    ignore messages of type \c QtDebugMsg.
 
-    In the default configuration \l isWarningEnabled() , \l isDebugEnabled() and
-    \l isCriticalEnabled() will return \c true.
+    If no argument is passed, all messages will be logged.
 
     \section1 Configuring Categories
 
-    Categories can be centrally configured by either setting logging rules,
-    or by installing a custom filter.
+    The default configuration of categories can be overridden either by setting logging
+    rules, or by installing a custom filter.
 
     \section2 Logging Rules
 
@@ -131,7 +130,13 @@ static void setBoolLane(QBasicAtomicInt *atomic, bool enable, int shift)
     are automatically loaded from the \c [Rules] section of a logging
     configuration file. Such configuration files are looked up in the QtProject
     configuration directory, or explicitly set in a \c QT_LOGGING_CONF
-    environment variable.
+    environment variable:
+
+    \code
+    [Rules]
+    *.debug=false
+    driver.usb.debug=true
+    \endcode
 
     Rules set by \l setFilterRules() take precedence over rules specified
     in the QtProject configuration directory, and can, in turn, be
@@ -167,7 +172,7 @@ static void setBoolLane(QBasicAtomicInt *atomic, bool enable, int shift)
     custom filter via \l installFilter(). All filter rules are ignored in this
     case.
 
-    \section1 Printing the category
+    \section1 Printing the Category
 
     Use the \c %{category} place holder to print the category in the default
     message handler:
@@ -177,7 +182,7 @@ static void setBoolLane(QBasicAtomicInt *atomic, bool enable, int shift)
 
 /*!
     Constructs a QLoggingCategory object with the provided \a category name.
-    The object becomes the local identifier for the category.
+    All message types for this category are enabled by default.
 
     If \a category is \c{0}, the category name is changed to \c "default".
 */
@@ -185,23 +190,35 @@ QLoggingCategory::QLoggingCategory(const char *category)
     : d(0),
       name(0)
 {
-    Q_UNUSED(d);
-    Q_UNUSED(placeholder);
-    enabled.store(0x01010101);   // enabledDebug = enabledWarning = enabledCritical = true;
+    init(category, QtDebugMsg);
+}
 
-    const bool isDefaultCategory
-            = (category == 0) || (strcmp(category, qtDefaultCategoryName) == 0);
+/*!
+    Constructs a QLoggingCategory object with the provided \a category name,
+    and enables all messages with types more severe or equal than \a enableForLevel.
 
-    // normalize "default" category name, so that we can just do
-    // pointer comparison in QLoggingRegistry::updateCategory
-    if (isDefaultCategory) {
-        name = qtDefaultCategoryName;
-    } else {
+    If \a category is \c{0}, the category name is changed to \c "default".
+
+    \since 5.4
+*/
+QLoggingCategory::QLoggingCategory(const char *category, QtMsgType enableForLevel)
+    : d(0),
+      name(0)
+{
+    init(category, enableForLevel);
+}
+
+void QLoggingCategory::init(const char *category, QtMsgType severityLevel)
+{
+    enabled.store(0x01010101);   // enabledDebug = enabledWarning = enabledCritical = true;
+
+    if (category)
         name = category;
-    }
+    else
+        name = qtDefaultCategoryName;
 
     if (QLoggingRegistry *reg = QLoggingRegistry::instance())
-        reg->registerCategory(this);
+        reg->registerCategory(this, severityLevel);
 }
 
 /*!
@@ -501,6 +518,7 @@ void QLoggingCategory::setFilterRules(const QString &rules)
 */
 /*!
     \macro Q_DECLARE_LOGGING_CATEGORY(name)
+    \sa Q_LOGGING_CATEGORY()
     \relates QLoggingCategory
     \since 5.2
 
@@ -512,11 +530,12 @@ void QLoggingCategory::setFilterRules(const QString &rules)
 
 /*!
     \macro Q_LOGGING_CATEGORY(name, string)
+    \sa Q_DECLARE_LOGGING_CATEGORY()
     \relates QLoggingCategory
     \since 5.2
 
     Defines a logging category \a name, and makes it configurable under the
-    \a string identifier.
+    \a string identifier. By default, all message types are enabled.
 
     Only one translation unit in a library or executable can define a category
     with a specific name.
@@ -524,4 +543,21 @@ void QLoggingCategory::setFilterRules(const QString &rules)
     This macro must be used outside of a class or method.
 */
 
+/*!
+    \macro Q_LOGGING_CATEGORY(name, string, msgType)
+    \sa Q_DECLARE_LOGGING_CATEGORY()
+    \relates QLoggingCategory
+    \since 5.4
+
+    Defines a logging category \a name, and makes it configurable under the
+    \a string identifier. By default, messages of QtMsgType \a msgType
+    and more severe are enabled, types with a lower severity are disabled.
+
+    Only one translation unit in a library or executable can define a category
+    with a specific name.
+
+    This macro must be used outside of a class or method. It is only defined
+    if variadic macros are supported.
+*/
+
 QT_END_NAMESPACE
diff --git a/src/corelib/io/qloggingcategory.h b/src/corelib/io/qloggingcategory.h
index 573af2105c..c7e242af08 100644
--- a/src/corelib/io/qloggingcategory.h
+++ b/src/corelib/io/qloggingcategory.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,7 +43,9 @@ class Q_CORE_EXPORT QLoggingCategory
 {
     Q_DISABLE_COPY(QLoggingCategory)
 public:
+    // ### Qt 6: Merge constructors
     explicit QLoggingCategory(const char *category);
+    QLoggingCategory(const char *category, QtMsgType severityLevel);
     ~QLoggingCategory();
 
     bool isEnabled(QtMsgType type) const;
@@ -80,7 +74,9 @@ public:
     static void setFilterRules(const QString &rules);
 
 private:
-    void *d; // reserved for future use
+    void init(const char *category, QtMsgType severityLevel);
+
+    Q_DECL_UNUSED_MEMBER void *d; // reserved for future use
     const char *name;
 
 #ifdef Q_BIG_ENDIAN
@@ -100,40 +96,47 @@ private:
         AtomicBools bools;
         QBasicAtomicInt enabled;
     };
-    bool placeholder[4]; // reserve for future use
+    Q_DECL_UNUSED_MEMBER bool placeholder[4]; // reserved for future use
 };
 
 #define Q_DECLARE_LOGGING_CATEGORY(name) \
     extern const QLoggingCategory &name();
 
-// relies on QLoggingCategory(QString) being thread safe!
-#define Q_LOGGING_CATEGORY(name, string) \
+#if defined(Q_COMPILER_VARIADIC_MACROS) || defined(Q_MOC_RUN)
+
+#define Q_LOGGING_CATEGORY(name, ...) \
     const QLoggingCategory &name() \
     { \
-        static const QLoggingCategory category(string); \
+        static const QLoggingCategory category(__VA_ARGS__); \
         return category; \
     }
 
-#ifdef Q_COMPILER_VARIADIC_MACROS
-
 #define qCDebug(category, ...) \
     for (bool qt_category_enabled = category().isDebugEnabled(); qt_category_enabled; qt_category_enabled = false) \
-        QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO, category().categoryName()).debug(__VA_ARGS__)
+        QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC, category().categoryName()).debug(__VA_ARGS__)
 #define qCWarning(category, ...) \
     for (bool qt_category_enabled = category().isWarningEnabled(); qt_category_enabled; qt_category_enabled = false) \
-        QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO, category().categoryName()).warning(__VA_ARGS__)
+        QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC, category().categoryName()).warning(__VA_ARGS__)
 #define qCCritical(category, ...) \
     for (bool qt_category_enabled = category().isCriticalEnabled(); qt_category_enabled; qt_category_enabled = false) \
-        QMessageLogger(__FILE__, __LINE__, Q_FUNC_INFO, category().categoryName()).critical(__VA_ARGS__)
+        QMessageLogger(QT_MESSAGELOG_FILE, QT_MESSAGELOG_LINE, QT_MESSAGELOG_FUNC, category().categoryName()).critical(__VA_ARGS__)
 
-#else
+#else // defined(Q_COMPILER_VARIADIC_MACROS) || defined(Q_MOC_RUN)
+
+// Optional msgType argument not supported
+#define Q_LOGGING_CATEGORY(name, string) \
+    const QLoggingCategory &name() \
+    { \
+        static const QLoggingCategory category(string); \
+        return category; \
+    }
 
 // check for enabled category inside QMessageLogger.
 #define qCDebug qDebug
 #define qCWarning qWarning
 #define qCCritical qCritical
 
-#endif // Q_COMPILER_VARIADIC_MACROS
+#endif // Q_COMPILER_VARIADIC_MACROS || defined(Q_MOC_RUN)
 
 #if defined(QT_NO_DEBUG_OUTPUT)
 #  undef qCDebug
diff --git a/src/corelib/io/qloggingregistry.cpp b/src/corelib/io/qloggingregistry.cpp
index 575150f148..4ee3068e27 100644
--- a/src/corelib/io/qloggingregistry.cpp
+++ b/src/corelib/io/qloggingregistry.cpp
@@ -1,46 +1,37 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qloggingregistry_p.h"
-#include "qloggingcategory_p.h"
 
 #include <QtCore/qfile.h>
 #include <QtCore/qstandardpaths.h>
@@ -131,15 +122,15 @@ void QLoggingRule::parse(const QStringRef &pattern)
     // strip trailing ".messagetype"
     if (pattern.endsWith(QLatin1String(".debug"))) {
         p = QStringRef(pattern.string(), pattern.position(),
-                       pattern.length() - strlen(".debug"));
+                       pattern.length() - 6); // strlen(".debug")
         messageType = QtDebugMsg;
     } else if (pattern.endsWith(QLatin1String(".warning"))) {
         p = QStringRef(pattern.string(), pattern.position(),
-                       pattern.length() - strlen(".warning"));
+                       pattern.length() - 8); // strlen(".warning")
         messageType = QtWarningMsg;
     } else if (pattern.endsWith(QLatin1String(".critical"))) {
         p = QStringRef(pattern.string(), pattern.position(),
-                       pattern.length() - strlen(".critical"));
+                       pattern.length() - 9); // strlen(".critical")
         messageType = QtCriticalMsg;
     } else {
         p = pattern;
@@ -261,12 +252,12 @@ void QLoggingRegistry::init()
     if (!rulesFilePath.isEmpty()) {
         QFile file(QFile::decodeName(rulesFilePath));
         if (file.open(QIODevice::ReadOnly | QIODevice::Text)) {
-            QTextStream stream(&file);
-            QLoggingSettingsParser parser;
-            parser.setContent(stream);
             if (qtLoggingDebug())
                 debugMsg("Loading \"%s\" ...",
                          QDir::toNativeSeparators(file.fileName()).toUtf8().constData());
+            QTextStream stream(&file);
+            QLoggingSettingsParser parser;
+            parser.setContent(stream);
             envRules = parser.rules();
         }
     }
@@ -285,12 +276,12 @@ void QLoggingRegistry::init()
     if (!envPath.isEmpty()) {
         QFile file(envPath);
         if (file.open(QIODevice::ReadOnly | QIODevice::Text)) {
-            QTextStream stream(&file);
-            QLoggingSettingsParser parser;
-            parser.setContent(stream);
             if (qtLoggingDebug())
                 debugMsg("Loading \"%s\" ...",
                          QDir::toNativeSeparators(envPath).toUtf8().constData());
+            QTextStream stream(&file);
+            QLoggingSettingsParser parser;
+            parser.setContent(stream);
             configRules = parser.rules();
         }
     }
@@ -307,12 +298,12 @@ void QLoggingRegistry::init()
 
     This method might be called concurrently for the same category object.
 */
-void QLoggingRegistry::registerCategory(QLoggingCategory *cat)
+void QLoggingRegistry::registerCategory(QLoggingCategory *cat, QtMsgType enableForLevel)
 {
     QMutexLocker locker(&registryMutex);
 
     if (!categories.contains(cat)) {
-        categories.append(cat);
+        categories.insert(cat, enableForLevel);
         (*categoryFilter)(cat);
     }
 }
@@ -324,8 +315,7 @@ void QLoggingRegistry::registerCategory(QLoggingCategory *cat)
 void QLoggingRegistry::unregisterCategory(QLoggingCategory *cat)
 {
     QMutexLocker locker(&registryMutex);
-
-    categories.removeOne(cat);
+    categories.remove(cat);
 }
 
 /*!
@@ -341,7 +331,7 @@ void QLoggingRegistry::setApiRules(const QString &content)
     QMutexLocker locker(&registryMutex);
 
     if (qtLoggingDebug())
-        debugMsg("Loading logging rules set by Qt API ...");
+        debugMsg("Loading logging rules set by QLoggingCategory::setFilterRules ...");
 
     apiRules = parser.rules();
 
@@ -361,7 +351,7 @@ void QLoggingRegistry::updateRules()
 
     rules = configRules + apiRules + envRules;
 
-    foreach (QLoggingCategory *cat, categories)
+    foreach (QLoggingCategory *cat, categories.keys())
         (*categoryFilter)(cat);
 }
 
@@ -380,7 +370,7 @@ QLoggingRegistry::installFilter(QLoggingCategory::CategoryFilter filter)
     QLoggingCategory::CategoryFilter old = categoryFilter;
     categoryFilter = filter;
 
-    foreach (QLoggingCategory *cat, categories)
+    foreach (QLoggingCategory *cat, categories.keys())
         (*categoryFilter)(cat);
 
     return old;
@@ -397,18 +387,22 @@ QLoggingRegistry *QLoggingRegistry::instance()
 */
 void QLoggingRegistry::defaultCategoryFilter(QLoggingCategory *cat)
 {
-    // QLoggingCategory() normalizes "default" strings
-    // to qtDefaultCategoryName
-    bool debug = true;
+    QLoggingRegistry *reg = QLoggingRegistry::instance();
+    Q_ASSERT(reg->categories.contains(cat));
+    QtMsgType enableForLevel = reg->categories.value(cat);
+
+    bool debug = (enableForLevel == QtDebugMsg) ? true : false;
+    bool warning = (enableForLevel <= QtWarningMsg) ? true : false;
+    bool critical = (enableForLevel <= QtCriticalMsg) ? true : false;
+
+    // hard-wired implementation of
+    //   qt.*.debug=false
+    //   qt.debug=false
     char c;
     if (!memcmp(cat->categoryName(), "qt", 2) && (!(c = cat->categoryName()[2]) || c == '.'))
         debug = false;
 
-    bool warning = true;
-    bool critical = true;
-
     QString categoryName = QLatin1String(cat->categoryName());
-    QLoggingRegistry *reg = QLoggingRegistry::instance();
     foreach (const QLoggingRule &item, reg->rules) {
         int filterpass = item.pass(categoryName, QtDebugMsg);
         if (filterpass != 0)
diff --git a/src/corelib/io/qloggingregistry_p.h b/src/corelib/io/qloggingregistry_p.h
index 48804cfc2b..0f12918221 100644
--- a/src/corelib/io/qloggingregistry_p.h
+++ b/src/corelib/io/qloggingregistry_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -113,7 +105,7 @@ public:
 
     void init();
 
-    void registerCategory(QLoggingCategory *category);
+    void registerCategory(QLoggingCategory *category, QtMsgType enableForLevel);
     void unregisterCategory(QLoggingCategory *category);
 
     void setApiRules(const QString &content);
@@ -134,7 +126,7 @@ private:
     QVector<QLoggingRule> envRules;
     QVector<QLoggingRule> apiRules;
     QVector<QLoggingRule> rules;
-    QList<QLoggingCategory*> categories;
+    QHash<QLoggingCategory*,QtMsgType> categories;
     QLoggingCategory::CategoryFilter categoryFilter;
 
     friend class ::tst_QLoggingRegistry;
diff --git a/src/corelib/io/qnoncontiguousbytedevice.cpp b/src/corelib/io/qnoncontiguousbytedevice.cpp
index b1e4dd7584..11510a8397 100644
--- a/src/corelib/io/qnoncontiguousbytedevice.cpp
+++ b/src/corelib/io/qnoncontiguousbytedevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -506,6 +498,25 @@ QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QIODevice *dev
 }
 
 /*!
+    Create a QNonContiguousByteDevice out of a QIODevice, return it in a QSharedPointer.
+    For QFile, QBuffer and all other QIODevice, sequential or not.
+
+    \internal
+*/
+QSharedPointer<QNonContiguousByteDevice> QNonContiguousByteDeviceFactory::createShared(QIODevice *device)
+{
+    // shortcut if it is a QBuffer
+    if (QBuffer *buffer = qobject_cast<QBuffer*>(device))
+        return QSharedPointer<QNonContiguousByteDeviceBufferImpl>::create(buffer);
+
+    // ### FIXME special case if device is a QFile that supports map()
+    // then we can actually deal with the file without using read/peek
+
+    // generic QIODevice
+    return QSharedPointer<QNonContiguousByteDeviceIoDeviceImpl>::create(device); // FIXME
+}
+
+/*!
     \fn static QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QSharedPointer<QRingBuffer> ringBuffer)
 
     Create a QNonContiguousByteDevice out of a QRingBuffer.
@@ -518,6 +529,16 @@ QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QSharedPointer
 }
 
 /*!
+    Create a QNonContiguousByteDevice out of a QRingBuffer, return it in a QSharedPointer.
+
+    \internal
+*/
+QSharedPointer<QNonContiguousByteDevice> QNonContiguousByteDeviceFactory::createShared(QSharedPointer<QRingBuffer> ringBuffer)
+{
+    return QSharedPointer<QNonContiguousByteDeviceRingBufferImpl>::create(qMove(ringBuffer));
+}
+
+/*!
     \fn static QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QByteArray *byteArray)
 
     Create a QNonContiguousByteDevice out of a QByteArray.
@@ -530,6 +551,16 @@ QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QByteArray *by
 }
 
 /*!
+    Create a QNonContiguousByteDevice out of a QByteArray.
+
+    \internal
+*/
+QSharedPointer<QNonContiguousByteDevice> QNonContiguousByteDeviceFactory::createShared(QByteArray *byteArray)
+{
+    return QSharedPointer<QNonContiguousByteDeviceByteArrayImpl>::create(byteArray);
+}
+
+/*!
     \fn static QIODevice* QNonContiguousByteDeviceFactory::wrap(QNonContiguousByteDevice* byteDevice)
 
     Wrap the \a byteDevice (possibly again) into a QIODevice.
diff --git a/src/corelib/io/qnoncontiguousbytedevice_p.h b/src/corelib/io/qnoncontiguousbytedevice_p.h
index 4606ac2686..c05ae11b0f 100644
--- a/src/corelib/io/qnoncontiguousbytedevice_p.h
+++ b/src/corelib/io/qnoncontiguousbytedevice_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -90,8 +82,14 @@ class Q_CORE_EXPORT QNonContiguousByteDeviceFactory
 {
 public:
     static QNonContiguousByteDevice* create(QIODevice *device);
+    static QSharedPointer<QNonContiguousByteDevice> createShared(QIODevice *device);
+
     static QNonContiguousByteDevice* create(QByteArray *byteArray);
+    static QSharedPointer<QNonContiguousByteDevice> createShared(QByteArray *byteArray);
+
     static QNonContiguousByteDevice* create(QSharedPointer<QRingBuffer> ringBuffer);
+    static QSharedPointer<QNonContiguousByteDevice> createShared(QSharedPointer<QRingBuffer> ringBuffer);
+
     static QIODevice* wrap(QNonContiguousByteDevice* byteDevice);
 };
 
diff --git a/src/corelib/io/qprocess.cpp b/src/corelib/io/qprocess.cpp
index 66036fca90..e009191be9 100644
--- a/src/corelib/io/qprocess.cpp
+++ b/src/corelib/io/qprocess.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1667,11 +1659,10 @@ QProcess::ProcessState QProcess::state() const
 
 /*!
     \deprecated
-    Sets the environment that QProcess will use when starting a process to the
-    \a environment specified which consists of a list of key=value pairs.
+    Sets the environment that QProcess will pass to the child process.
+    The parameter \a environment is a list of key=value pairs.
 
-    For example, the following code adds the \c{C:\\BIN} directory to the list of
-    executable paths (\c{PATHS}) on Windows:
+    For example, the following code adds the environment variable \c{TMPDIR}:
 
     \snippet qprocess-environment/main.cpp 0
 
@@ -1687,7 +1678,7 @@ void QProcess::setEnvironment(const QStringList &environment)
 
 /*!
     \deprecated
-    Returns the environment that QProcess will use when starting a
+    Returns the environment that QProcess will pass to its child
     process, or an empty QStringList if no environment has been set
     using setEnvironment(). If no environment has been set, the
     environment of the calling process will be used.
@@ -1705,11 +1696,9 @@ QStringList QProcess::environment() const
 
 /*!
     \since 4.6
-    Sets the environment that QProcess will use when starting a process to the
-    \a environment object.
+    Sets the \a environment that QProcess will pass to the child process.
 
-    For example, the following code adds the \c{C:\\BIN} directory to the list of
-    executable paths (\c{PATHS}) on Windows and sets \c{TMPDIR}:
+    For example, the following code adds the environment variable \c{TMPDIR}:
 
     \snippet qprocess-environment/main.cpp 1
 
@@ -1725,7 +1714,7 @@ void QProcess::setProcessEnvironment(const QProcessEnvironment &environment)
 
 /*!
     \since 4.6
-    Returns the environment that QProcess will use when starting a
+    Returns the environment that QProcess will pass to its child
     process, or an empty object if no environment has been set using
     setEnvironment() or setProcessEnvironment(). If no environment has
     been set, the environment of the calling process will be used.
diff --git a/src/corelib/io/qprocess.h b/src/corelib/io/qprocess.h
index 94359acf00..8d90177c8b 100644
--- a/src/corelib/io/qprocess.h
+++ b/src/corelib/io/qprocess.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qprocess_p.h b/src/corelib/io/qprocess_p.h
index 6cd9047c04..35626ddc38 100644
--- a/src/corelib/io/qprocess_p.h
+++ b/src/corelib/io/qprocess_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qprocess_unix.cpp b/src/corelib/io/qprocess_unix.cpp
index 2269740a2f..cc154cfbc5 100644
--- a/src/corelib/io/qprocess_unix.cpp
+++ b/src/corelib/io/qprocess_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qprocess_win.cpp b/src/corelib/io/qprocess_win.cpp
index 7b3f1f8f58..980fb58865 100644
--- a/src/corelib/io/qprocess_win.cpp
+++ b/src/corelib/io/qprocess_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qprocess_wince.cpp b/src/corelib/io/qprocess_wince.cpp
index e0bee48598..d6db097813 100644
--- a/src/corelib/io/qprocess_wince.cpp
+++ b/src/corelib/io/qprocess_wince.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qresource.cpp b/src/corelib/io/qresource.cpp
index bfd0eef64f..ed6bfb4e0d 100644
--- a/src/corelib/io/qresource.cpp
+++ b/src/corelib/io/qresource.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qresource.h b/src/corelib/io/qresource.h
index 88467bd53b..e5a0acedfb 100644
--- a/src/corelib/io/qresource.h
+++ b/src/corelib/io/qresource.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qresource_iterator.cpp b/src/corelib/io/qresource_iterator.cpp
index 7898d700f1..decb2c709e 100644
--- a/src/corelib/io/qresource_iterator.cpp
+++ b/src/corelib/io/qresource_iterator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qresource_iterator_p.h b/src/corelib/io/qresource_iterator_p.h
index 5220e517fb..451773ec63 100644
--- a/src/corelib/io/qresource_iterator_p.h
+++ b/src/corelib/io/qresource_iterator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qresource_p.h b/src/corelib/io/qresource_p.h
index d632ac70be..030d1587e5 100644
--- a/src/corelib/io/qresource_p.h
+++ b/src/corelib/io/qresource_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qsavefile.cpp b/src/corelib/io/qsavefile.cpp
index 2b901c7ccd..360be806c4 100644
--- a/src/corelib/io/qsavefile.cpp
+++ b/src/corelib/io/qsavefile.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -205,14 +197,32 @@ bool QSaveFile::open(OpenMode mode)
         d->writeError = QFileDevice::WriteError;
         return false;
     }
-    d->fileEngine = new QTemporaryFileEngine(d->fileName);
+
+    if (existingFile.isDir()) {
+        d->setError(QFileDevice::WriteError, QSaveFile::tr("Filename refers to a directory"));
+        d->writeError = QFileDevice::WriteError;
+        return false;
+    }
+
+    // Resolve symlinks. Don't use QFileInfo::canonicalFilePath so it still give the expected
+    // target even if the file does not exist
+    d->finalFileName = d->fileName;
+    if (existingFile.isSymLink()) {
+        int maxDepth = 128;
+        while (--maxDepth && existingFile.isSymLink())
+            existingFile.setFile(existingFile.symLinkTarget());
+        if (maxDepth > 0)
+            d->finalFileName = existingFile.filePath();
+    }
+
+    d->fileEngine = new QTemporaryFileEngine(d->finalFileName);
     // Same as in QFile: QIODevice provides the buffering, so there's no need to request it from the file engine.
     if (!d->fileEngine->open(mode | QIODevice::Unbuffered)) {
         QFileDevice::FileError err = d->fileEngine->error();
 #ifdef Q_OS_UNIX
         if (d->directWriteFallback && err == QFileDevice::OpenError && errno == EACCES) {
             delete d->fileEngine;
-            d->fileEngine = QAbstractFileEngine::create(d->fileName);
+            d->fileEngine = QAbstractFileEngine::create(d->finalFileName);
             if (d->fileEngine->open(mode | QIODevice::Unbuffered)) {
                 d->useTemporaryFile = false;
                 QFileDevice::open(mode);
@@ -285,7 +295,7 @@ bool QSaveFile::commit()
         // atomically replace old file with new file
         // Can't use QFile::rename for that, must use the file engine directly
         Q_ASSERT(d->fileEngine);
-        if (!d->fileEngine->renameOverwrite(d->fileName)) {
+        if (!d->fileEngine->renameOverwrite(d->finalFileName)) {
             d->setError(d->fileEngine->error(), d->fileEngine->errorString());
             d->fileEngine->remove();
             delete d->fileEngine;
diff --git a/src/corelib/io/qsavefile.h b/src/corelib/io/qsavefile.h
index ad18417124..20e4ecaf87 100644
--- a/src/corelib/io/qsavefile.h
+++ b/src/corelib/io/qsavefile.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qsavefile_p.h b/src/corelib/io/qsavefile_p.h
index b9efd1ee7c..1a0f621c5b 100644
--- a/src/corelib/io/qsavefile_p.h
+++ b/src/corelib/io/qsavefile_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,7 @@ protected:
     ~QSaveFilePrivate();
 
     QString fileName;
+    QString finalFileName; // fileName with symbolic links resolved
 
     QFileDevice::FileError writeError;
 
diff --git a/src/corelib/io/qsettings.cpp b/src/corelib/io/qsettings.cpp
index 7330a565a2..f6cd5aa7c9 100644
--- a/src/corelib/io/qsettings.cpp
+++ b/src/corelib/io/qsettings.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,6 +45,8 @@
 #include "qmutex.h"
 #include "qlibraryinfo.h"
 #include "qtemporaryfile.h"
+#include "qstandardpaths.h"
+#include <qdatastream.h>
 
 #ifndef QT_NO_TEXTCODEC
 #  include "qtextcodec.h"
@@ -68,6 +62,11 @@
 #include "qcoreapplication.h"
 #endif
 
+#ifndef QT_BOOTSTRAPPED
+#include "qsavefile.h"
+#include "qlockfile.h"
+#endif
+
 #ifdef Q_OS_VXWORKS
 #  include <ioLib.h>
 #endif
@@ -101,12 +100,6 @@ using namespace ABI::Windows::Storage;
 #define CSIDL_APPDATA           0x001a  // <username>\Application Data
 #endif
 
-#ifdef Q_AUTOTEST_EXPORT
-#  define Q_AUTOTEST_EXPORT_HELPER Q_AUTOTEST_EXPORT
-#else
-#  define Q_AUTOTEST_EXPORT_HELPER static
-#endif
-
 // ************************************************************************
 // QConfFile
 
@@ -141,101 +134,6 @@ static QBasicMutex settingsGlobalMutex;
 
 static QSettings::Format globalDefaultFormat = QSettings::NativeFormat;
 
-#ifndef Q_OS_WIN
-inline bool qt_isEvilFsTypeName(const char *name)
-{
-    return (qstrncmp(name, "nfs", 3) == 0
-            || qstrncmp(name, "autofs", 6) == 0
-            || qstrncmp(name, "cachefs", 7) == 0);
-}
-
-#if defined(Q_OS_BSD4) && !defined(Q_OS_NETBSD)
-QT_BEGIN_INCLUDE_NAMESPACE
-# include <sys/param.h>
-# include <sys/mount.h>
-QT_END_INCLUDE_NAMESPACE
-
-Q_AUTOTEST_EXPORT_HELPER bool qIsLikelyToBeNfs(int handle)
-{
-    struct statfs buf;
-    if (fstatfs(handle, &buf) != 0)
-        return false;
-    return qt_isEvilFsTypeName(buf.f_fstypename);
-}
-
-#elif defined(Q_OS_LINUX) || defined(Q_OS_HURD)
-QT_BEGIN_INCLUDE_NAMESPACE
-# include <sys/vfs.h>
-# ifdef QT_LINUXBASE
-   // LSB 3.2 has fstatfs in sys/statfs.h, sys/vfs.h is just an empty dummy header
-#  include <sys/statfs.h>
-# endif
-QT_END_INCLUDE_NAMESPACE
-# ifndef NFS_SUPER_MAGIC
-#  define NFS_SUPER_MAGIC       0x00006969
-# endif
-# ifndef AUTOFS_SUPER_MAGIC
-#  define AUTOFS_SUPER_MAGIC    0x00000187
-# endif
-# ifndef AUTOFSNG_SUPER_MAGIC
-#  define AUTOFSNG_SUPER_MAGIC  0x7d92b1a0
-# endif
-
-Q_AUTOTEST_EXPORT_HELPER bool qIsLikelyToBeNfs(int handle)
-{
-    struct statfs buf;
-    if (fstatfs(handle, &buf) != 0)
-        return false;
-    return buf.f_type == NFS_SUPER_MAGIC
-           || buf.f_type == AUTOFS_SUPER_MAGIC
-           || buf.f_type == AUTOFSNG_SUPER_MAGIC;
-}
-
-#elif defined(Q_OS_SOLARIS) || defined(Q_OS_IRIX) || defined(Q_OS_AIX) || defined(Q_OS_HPUX) \
-      || defined(Q_OS_OSF) || defined(Q_OS_QNX) || defined(Q_OS_SCO) \
-      || defined(Q_OS_UNIXWARE) || defined(Q_OS_RELIANT) || defined(Q_OS_NETBSD)
-QT_BEGIN_INCLUDE_NAMESPACE
-# include <sys/statvfs.h>
-QT_END_INCLUDE_NAMESPACE
-
-Q_AUTOTEST_EXPORT_HELPER bool qIsLikelyToBeNfs(int handle)
-{
-    struct statvfs buf;
-    if (fstatvfs(handle, &buf) != 0)
-        return false;
-#if defined(Q_OS_NETBSD)
-    return qt_isEvilFsTypeName(buf.f_fstypename);
-#else
-    return qt_isEvilFsTypeName(buf.f_basetype);
-#endif
-}
-#else
-Q_AUTOTEST_EXPORT_HELPER inline bool qIsLikelyToBeNfs(int /* handle */)
-{
-    return true;
-}
-#endif
-
-static bool unixLock(int handle, int lockType)
-{
-    /*
-        NFS hangs on the fcntl() call below when statd or lockd isn't
-        running. There's no way to detect this. Our work-around for
-        now is to disable locking when we detect NFS (or AutoFS or
-        CacheFS, which are probably wrapping NFS).
-    */
-    if (qIsLikelyToBeNfs(handle))
-        return false;
-
-    struct flock fl;
-    fl.l_whence = SEEK_SET;
-    fl.l_start = 0;
-    fl.l_len = 0;
-    fl.l_type = lockType;
-    return fcntl(handle, F_SETLKW, &fl) == 0;
-}
-#endif
-
 QConfFile::QConfFile(const QString &fileName, bool _userPerms)
     : name(fileName), size(0), ref(1), userPerms(_userPerms)
 {
@@ -376,9 +274,9 @@ after_loop:
     return result;
 }
 
-// see also qsettings_win.cpp and qsettings_mac.cpp
+// see also qsettings_win.cpp, qsettings_winrt.cpp and qsettings_mac.cpp
 
-#if defined(Q_OS_WINRT) || (!defined(Q_OS_WIN) && !defined(Q_OS_MAC))
+#if !defined(Q_OS_WIN) && !defined(Q_OS_MAC)
 QSettingsPrivate *QSettingsPrivate::create(QSettings::Format format, QSettings::Scope scope,
                                            const QString &organization, const QString &application)
 {
@@ -386,7 +284,7 @@ QSettingsPrivate *QSettingsPrivate::create(QSettings::Format format, QSettings::
 }
 #endif
 
-#if defined(Q_OS_WINRT) || !defined(Q_OS_WIN)
+#if !defined(Q_OS_WIN)
 QSettingsPrivate *QSettingsPrivate::create(const QString &fileName, QSettings::Format format)
 {
     return new QConfFileSettingsPrivate(fileName, format);
@@ -1142,6 +1040,8 @@ static void initDefaultPaths(QMutexLocker *locker)
         pathHash->insert(pathHashKey(QSettings::IniFormat, QSettings::SystemScope),
                          windowsConfigPath(CSIDL_COMMON_APPDATA) + QDir::separator());
 #else
+
+#ifdef QT_NO_STANDARDPATHS
         QString userPath;
         char *env = getenv("XDG_CONFIG_HOME");
         if (env == 0) {
@@ -1155,6 +1055,9 @@ static void initDefaultPaths(QMutexLocker *locker)
             userPath += QLatin1Char('/');
             userPath += QFile::decodeName(env);
         }
+#else
+        QString userPath = QStandardPaths::writableLocation(QStandardPaths::GenericConfigLocation);
+#endif
         userPath += QLatin1Char('/');
 
         pathHash->insert(pathHashKey(QSettings::IniFormat, QSettings::UserScope), userPath);
@@ -1459,105 +1362,30 @@ void QConfFileSettingsPrivate::syncConfFile(int confFileNo)
             return;
     }
 
+#ifndef QT_BOOTSTRAPPED
     /*
-        Open the configuration file and try to use it using a named
-        semaphore on Windows and an advisory lock on Unix-based
-        systems. This protect us against other QSettings instances
-        trying to access the same file from other threads or
-        processes.
-
-        As it stands now, the locking mechanism doesn't work for
-        .plist files.
-    */
-    QFile file(confFile->name);
-    bool createFile = !file.exists();
-    if (!readOnly && confFile->isWritable())
-        file.open(QFile::ReadWrite);
-    if (!file.isOpen())
-        file.open(QFile::ReadOnly);
-
-    if (!createFile && !file.isOpen())
-        setStatus(QSettings::AccessError);
-
-#ifdef Q_OS_WIN
-    HANDLE readSemaphore = 0;
-    HANDLE writeSemaphore = 0;
-    static const int FileLockSemMax = 50;
-    int numReadLocks = readOnly ? 1 : FileLockSemMax;
-
-    if (file.isOpen()) {
-        // Acquire the write lock if we will be writing
-        if (!readOnly) {
-            QString writeSemName = QLatin1String("QSettingsWriteSem ");
-            writeSemName.append(file.fileName());
-
-#ifndef Q_OS_WINRT
-            writeSemaphore = CreateSemaphore(0, 1, 1, reinterpret_cast<const wchar_t *>(writeSemName.utf16()));
-#else
-            writeSemaphore = CreateSemaphoreEx(0, 1, 1, reinterpret_cast<const wchar_t *>(writeSemName.utf16()), 0, SEMAPHORE_ALL_ACCESS);
-#endif
-
-            if (writeSemaphore) {
-#ifndef Q_OS_WINRT
-                WaitForSingleObject(writeSemaphore, INFINITE);
-#else
-                WaitForSingleObjectEx(writeSemaphore, INFINITE, FALSE);
-#endif
-            } else {
-                setStatus(QSettings::AccessError);
-                return;
-            }
-        }
+        Use a lockfile in order to protect us against other QSettings instances
+        trying to write the same settings at the same time.
 
-        // Acquire all the read locks if we will be writing, to make sure nobody
-        // reads while we're writing. If we are only reading, acquire a single
-        // read lock.
-        QString readSemName(QLatin1String("QSettingsReadSem "));
-        readSemName.append(file.fileName());
-
-#ifndef Q_OS_WINRT
-        readSemaphore = CreateSemaphore(0, FileLockSemMax, FileLockSemMax, reinterpret_cast<const wchar_t *>(readSemName.utf16()));
-#else
-        readSemaphore = CreateSemaphoreEx(0, FileLockSemMax, FileLockSemMax, reinterpret_cast<const wchar_t *>(readSemName.utf16()), 0, SEMAPHORE_ALL_ACCESS);
-#endif
-
-        if (readSemaphore) {
-            for (int i = 0; i < numReadLocks; ++i)
-#ifndef Q_OS_WINRT
-                WaitForSingleObject(readSemaphore, INFINITE);
-#else
-                WaitForSingleObjectEx(readSemaphore, INFINITE, FALSE);
-#endif
-        } else {
+        We only need to lock if we are actually writing as only concurrent writes are a problem.
+        Concurrent read and write are not a problem because the writing operation is atomic.
+    */
+    QLockFile lockFile(confFile->name + QLatin1String(".lock"));
+    if (!readOnly) {
+        if (!confFile->isWritable() || !lockFile.lock() ) {
             setStatus(QSettings::AccessError);
-            if (writeSemaphore != 0) {
-                ReleaseSemaphore(writeSemaphore, 1, 0);
-                CloseHandle(writeSemaphore);
-            }
             return;
         }
     }
-#else
-    if (file.isOpen())
-        unixLock(file.handle(), readOnly ? F_RDLCK : F_WRLCK);
 #endif
 
-    // If we have created the file, apply the file perms
-    if (file.isOpen()) {
-        if (createFile) {
-            QFile::Permissions perms = file.permissions() | QFile::ReadOwner | QFile::WriteOwner;
-            if (!confFile->userPerms)
-                perms |= QFile::ReadGroup | QFile::ReadOther;
-            file.setPermissions(perms);
-        }
-    }
-
     /*
         We hold the lock. Let's reread the file if it has changed
         since last time we read it.
     */
     QFileInfo fileInfo(confFile->name);
     bool mustReadFile = true;
+    bool createFile = !fileInfo.exists();
 
     if (!readOnly)
         mustReadFile = (confFile->size != fileInfo.size()
@@ -1567,6 +1395,12 @@ void QConfFileSettingsPrivate::syncConfFile(int confFileNo)
         confFile->unparsedIniSections.clear();
         confFile->originalKeys.clear();
 
+        QFile file(confFile->name);
+        if (!createFile && !file.open(QFile::ReadOnly)) {
+            setStatus(QSettings::AccessError);
+            return;
+        }
+
         /*
             Files that we can't read (because of permissions or
             because they don't exist) are treated as empty files.
@@ -1617,42 +1451,40 @@ void QConfFileSettingsPrivate::syncConfFile(int confFileNo)
         ensureAllSectionsParsed(confFile);
         ParsedSettingsMap mergedKeys = confFile->mergedKeyMap();
 
-        if (file.isWritable()) {
 #ifdef Q_OS_MAC
-            if (format == QSettings::NativeFormat) {
-                ok = writePlistFile(confFile->name, mergedKeys);
-            } else
+        if (format == QSettings::NativeFormat) {
+            ok = writePlistFile(confFile->name, mergedKeys);
+        } else
 #endif
-            {
-                file.seek(0);
-                file.resize(0);
+        {
+#ifndef QT_BOOTSTRAPPED
+            QSaveFile sf(confFile->name);
+#else
+            QFile sf(confFile->name);
+#endif
+            if (!sf.open(QIODevice::WriteOnly)) {
+                setStatus(QSettings::AccessError);
+                ok = false;
+            } else if (format <= QSettings::IniFormat) {
+                ok = writeIniFile(sf, mergedKeys);
+            } else {
+                if (writeFunc) {
+                    QSettings::SettingsMap tempOriginalKeys;
 
-                if (format <= QSettings::IniFormat) {
-                    ok = writeIniFile(file, mergedKeys);
-                    if (!ok) {
-                        // try to restore old data; might work if the disk was full and the new data
-                        // was larger than the old data
-                        file.seek(0);
-                        file.resize(0);
-                        writeIniFile(file, confFile->originalKeys);
+                    ParsedSettingsMap::const_iterator i = mergedKeys.constBegin();
+                    while (i != mergedKeys.constEnd()) {
+                        tempOriginalKeys.insert(i.key(), i.value());
+                        ++i;
                     }
+                    ok = writeFunc(sf, tempOriginalKeys);
                 } else {
-                    if (writeFunc) {
-                        QSettings::SettingsMap tempOriginalKeys;
-
-                        ParsedSettingsMap::const_iterator i = mergedKeys.constBegin();
-                        while (i != mergedKeys.constEnd()) {
-                            tempOriginalKeys.insert(i.key(), i.value());
-                            ++i;
-                        }
-                        ok = writeFunc(file, tempOriginalKeys);
-                    } else {
-                        ok = false;
-                    }
+                    ok = false;
                 }
             }
-        } else {
-            ok = false;
+#ifndef QT_BOOTSTRAPPED
+            if (ok)
+                ok = sf.commit();
+#endif
         }
 
         if (ok) {
@@ -1664,24 +1496,18 @@ void QConfFileSettingsPrivate::syncConfFile(int confFileNo)
             QFileInfo fileInfo(confFile->name);
             confFile->size = fileInfo.size();
             confFile->timeStamp = fileInfo.lastModified();
+
+            // If we have created the file, apply the file perms
+            if (createFile) {
+                QFile::Permissions perms = fileInfo.permissions() | QFile::ReadOwner | QFile::WriteOwner;
+                if (!confFile->userPerms)
+                    perms |= QFile::ReadGroup | QFile::ReadOther;
+                QFile(confFile->name).setPermissions(perms);
+            }
         } else {
             setStatus(QSettings::AccessError);
         }
     }
-
-    /*
-        Release the file lock.
-    */
-#ifdef Q_OS_WIN
-    if (readSemaphore != 0) {
-        ReleaseSemaphore(readSemaphore, numReadLocks, 0);
-        CloseHandle(readSemaphore);
-    }
-    if (writeSemaphore != 0) {
-        ReleaseSemaphore(writeSemaphore, 1, 0);
-        CloseHandle(writeSemaphore);
-    }
-#endif
 }
 
 enum { Space = 0x1, Special = 0x2 };
@@ -2507,12 +2333,6 @@ void QConfFileSettingsPrivate::ensureSectionParsed(QConfFile *confFile,
        10.8 (Mountain Lion), only root can. However, 10.9 (Mavericks) changes
        that rule again but only for the native format (plist files).
 
-    \li On Unix and Mac OS X systems, the advisory file locking is disabled
-       if NFS (or AutoFS or CacheFS) is detected to work around a bug in the
-       NFS fcntl() implementation, which hangs forever if statd or lockd aren't
-       running. Also, the locking isn't performed when accessing \c .plist
-       files.
-
     \li On the BlackBerry platform, applications run in a sandbox. They are not
        allowed to read or write outside of this sandbox. This involves the
        following limitations:
diff --git a/src/corelib/io/qsettings.h b/src/corelib/io/qsettings.h
index f44b99d009..4986c06896 100644
--- a/src/corelib/io/qsettings.h
+++ b/src/corelib/io/qsettings.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qsettings_mac.cpp b/src/corelib/io/qsettings_mac.cpp
index 7d1fb1a7c5..4752077f87 100644
--- a/src/corelib/io/qsettings_mac.cpp
+++ b/src/corelib/io/qsettings_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qsettings_p.h b/src/corelib/io/qsettings_p.h
index a28b583162..cb29b4c83a 100644
--- a/src/corelib/io/qsettings_p.h
+++ b/src/corelib/io/qsettings_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,10 @@ QT_BEGIN_NAMESPACE
 #define QT_QSETTINGS_ALWAYS_CASE_SENSITIVE_AND_FORGET_ORIGINAL_KEY_ORDER
 #endif
 
+#if defined(Q_OS_WINRT)
+#define QT_QTSETTINGS_FORGET_ORIGINAL_KEY_ORDER
+#endif
+
 // used in testing framework
 #define QSETTINGS_P_H_VERSION 3
 
diff --git a/src/corelib/io/qsettings_win.cpp b/src/corelib/io/qsettings_win.cpp
index 69f16f994a..3f67171bd4 100644
--- a/src/corelib/io/qsettings_win.cpp
+++ b/src/corelib/io/qsettings_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qsettings_winrt.cpp b/src/corelib/io/qsettings_winrt.cpp
new file mode 100644
index 0000000000..ad02f050e5
--- /dev/null
+++ b/src/corelib/io/qsettings_winrt.cpp
@@ -0,0 +1,695 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qsettings.h"
+
+#ifndef QT_NO_SETTINGS
+
+#include "qsettings_p.h"
+#include "qvector.h"
+#include "qmap.h"
+#include "qdebug.h"
+#include "qfunctions_winrt.h"
+
+#include <wrl.h>
+#include <wrl/event.h>
+#include <Windows.ApplicationModel.h>
+#include <windows.storage.h>
+
+using namespace ABI::Windows::ApplicationModel;
+using namespace ABI::Windows::Storage;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Foundation::Collections;
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+
+typedef ITypedEventHandler<ApplicationData*, IInspectable*> DataHandler;
+typedef Collections::IKeyValuePair<HSTRING, ApplicationDataContainer*> ContainerItem;
+typedef Collections::IIterable<ContainerItem*> ContainerIterable;
+typedef Collections::IIterator<ContainerItem*> ContainerIterator;
+
+typedef Collections::IKeyValuePair<HSTRING, IInspectable*> ValueItem;
+typedef Collections::IIterable<ValueItem*> ValueIterable;
+typedef Collections::IIterator<ValueItem*> ValueIterator;
+
+QT_BEGIN_NAMESPACE
+
+static IApplicationDataContainer *subContainer(IApplicationDataContainer *parent, const QString &name)
+{
+    ComPtr<IMapView<HSTRING, ApplicationDataContainer*>> childrenContainer;
+    HRESULT hr = parent->get_Containers(&childrenContainer);
+    if (FAILED(hr))
+        return 0;
+
+    ComPtr< ContainerIterable > iterable;
+    ComPtr< ContainerIterator > iterator;
+
+    hr = childrenContainer.As(&iterable);
+    if (FAILED(hr))
+        return 0;
+
+    hr = iterable->First(&iterator);
+    if (FAILED(hr))
+        return 0;
+    boolean current;
+    hr = iterator->get_HasCurrent(&current);
+    if (FAILED(hr))
+        return 0;
+
+    while (SUCCEEDED(S_OK) && current) {
+        ComPtr<ContainerItem> item;
+        hr = iterator->get_Current(&item);
+        if (FAILED(hr))
+            return 0;
+
+        HString key;
+        hr = item->get_Key(key.GetAddressOf());
+        if (FAILED(hr))
+            continue;
+        QString subName = QString::fromWCharArray(key.GetRawBuffer(nullptr));
+        if (name == subName) {
+            IApplicationDataContainer *container;
+            hr = item->get_Value(&container);
+            return SUCCEEDED(hr) ? container : 0;
+        }
+        hr = iterator->MoveNext(&current);
+    }
+
+    return 0;
+}
+
+static QStringList subContainerNames(IApplicationDataContainer *container, bool recursive = false)
+{
+    QStringList result;
+    ComPtr<IMapView<HSTRING, ApplicationDataContainer*>> childrenContainer;
+    HRESULT hr = container->get_Containers(&childrenContainer);
+    if (FAILED(hr))
+        return result;
+
+    ComPtr< ContainerIterable > iterable;
+    ComPtr< ContainerIterator > iterator;
+
+    hr = childrenContainer.As(&iterable);
+    if (FAILED(hr))
+        return result;
+
+    hr = iterable->First(&iterator);
+    if (FAILED(hr))
+        return result;
+    boolean current;
+    hr = iterator->get_HasCurrent(&current);
+    if (FAILED(hr))
+        return result;
+
+    while (SUCCEEDED(hr) && current) {
+        ComPtr<ContainerItem> item;
+        hr = iterator->get_Current(&item);
+        if (FAILED(hr))
+            return result;
+
+        HString key;
+        hr = item->get_Key(key.GetAddressOf());
+        if (SUCCEEDED(hr)) {
+            QString subName = QString::fromWCharArray(key.GetRawBuffer(nullptr));
+            result.append(subName);
+            if (recursive) {
+                ComPtr<IApplicationDataContainer> sub = subContainer(container, subName);
+                QStringList subSubNames = subContainerNames(sub.Get(), recursive);
+                for (int i = 0; i < subSubNames.size(); ++i)
+                    subSubNames[i] = subName + QLatin1Char('/') + subSubNames[i];
+                result.append(subSubNames);
+            }
+            hr = iterator->MoveNext(&current);
+        }
+    }
+    return result;
+}
+
+static QStringList keyNames(IApplicationDataContainer *container) {
+    HRESULT hr;
+    QStringList result;
+    ComPtr<IPropertySet> values;
+    hr = container->get_Values(&values);
+    if (FAILED(hr))
+        return result;
+
+    ComPtr<IMap<HSTRING, IInspectable*>> settingsMap;
+
+    hr = values.As(&settingsMap);
+    if (FAILED(hr))
+        return result;
+
+    ComPtr<IMapView<HSTRING, IInspectable*>> mapView;
+    hr = settingsMap->GetView(&mapView);
+    if (FAILED(hr))
+        return result;
+
+    ComPtr< ValueIterable > iterable;
+    ComPtr< ValueIterator > iterator;
+
+    hr = mapView.As(&iterable);
+    if (FAILED(hr))
+        return result;
+
+    boolean current = false;
+    hr = iterable->First(&iterator);
+    if (FAILED(hr))
+        return result;
+    hr = iterator->get_HasCurrent(&current);
+    if (FAILED(hr))
+        return result;
+
+    while (SUCCEEDED(hr) && current){
+        ComPtr<ValueItem> item;
+        hr = iterator->get_Current(&item);
+        if (FAILED(hr))
+            return result;
+
+        HString key;
+        hr = item->get_Key(key.GetAddressOf());
+        if (SUCCEEDED(hr)) {
+            result += QString::fromWCharArray(key.GetRawBuffer(nullptr));
+            hr = iterator->MoveNext(&current);
+        }
+    }
+    return result;
+}
+
+static IApplicationDataContainer *createSubContainer(IApplicationDataContainer *parent, const QString &name)
+{
+    HStringReference childGroupNativeName((const wchar_t*)name.utf16(), name.size());
+
+    IApplicationDataContainer *result = subContainer(parent, name);
+    if (!result)
+        parent->CreateContainer(childGroupNativeName.Get(), ApplicationDataCreateDisposition_Always, &result);
+    return result;
+}
+
+#define PROP_CASE_TO_VARIANT(TYPE, VARTYPE, QTYPE) \
+    case PropertyType_##TYPE: { \
+        VARTYPE v; \
+        value->Get##TYPE(&v); \
+        result.setValue( QTYPE(v) ); \
+        break; \
+    }
+
+static QVariant propertyValueToQVariant(IPropertyValue *value)
+{
+    QVariant result;
+    PropertyType type;
+    value->get_Type(&type);
+    switch (type) {
+    PROP_CASE_TO_VARIANT(Boolean, boolean, bool)
+    PROP_CASE_TO_VARIANT(UInt8, UINT8, quint8)
+    PROP_CASE_TO_VARIANT(Int16, INT16, qint16)
+    PROP_CASE_TO_VARIANT(UInt16, UINT16, quint16)
+    PROP_CASE_TO_VARIANT(Int32, INT32, qint32)
+    PROP_CASE_TO_VARIANT(UInt32, UINT32, quint32)
+    PROP_CASE_TO_VARIANT(Int64, INT64, qint64)
+    PROP_CASE_TO_VARIANT(UInt64, UINT64, quint64)
+    PROP_CASE_TO_VARIANT(Single, FLOAT, float)
+    PROP_CASE_TO_VARIANT(Double, DOUBLE, double)
+    case PropertyType_StringArray: {
+        UINT32 size;
+        HSTRING *content;
+        value->GetStringArray(&size, &content);
+        QStringList list;
+        // The last item is assumed to be added by us
+        for (UINT32 i = 0; i < size - 1; ++i) {
+            QString s = QString::fromWCharArray(WindowsGetStringRawBuffer(content[i], nullptr));
+            list.append(s);
+        }
+        result = QSettingsPrivate::stringListToVariantList(list);
+        break;
+    }
+    case PropertyType_String: {
+        HString v;
+        value->GetString(v.GetAddressOf());
+        result = QSettingsPrivate::stringToVariant(QString::fromWCharArray(v.GetRawBuffer(nullptr)));
+        break;
+    }
+    default: {
+        UINT32 size;
+        BYTE *arr;
+        value->GetUInt8Array(&size, &arr);
+        QByteArray data = QByteArray::fromRawData((const char*)arr, size);
+        QString s;
+        if (size) {
+            // We assume this is our qt stored data like on other platforms
+            // as well. QList and others are converted to byte arrays
+            s = QString::fromWCharArray((const wchar_t *)data.constData(), data.size() / 2);
+            result = QSettingsPrivate::stringToVariant(s);
+        }
+        break;
+    }
+    }
+    return result;
+}
+
+class QWinRTSettingsPrivate : public QSettingsPrivate
+{
+public:
+    QWinRTSettingsPrivate(QSettings::Scope scope, const QString &organization,
+                          const QString &application);
+    QWinRTSettingsPrivate(QString rKey);
+    ~QWinRTSettingsPrivate();
+
+    void remove(const QString &uKey);
+    void set(const QString &uKey, const QVariant &value);
+    bool get(const QString &uKey, QVariant *value) const;
+    QStringList children(const QString &uKey, ChildSpec spec) const;
+    void clear();
+    void sync();
+    void flush();
+    bool isWritable() const;
+    QString fileName() const;
+
+private:
+    void init(QSettings::Scope scope);
+    IApplicationDataContainer *getContainer(IApplicationDataContainer *parent, const QString &group, bool create = false) const;
+    void clearContainerMaps();
+
+    HRESULT onDataChanged(IApplicationData*, IInspectable*);
+
+    ComPtr<IApplicationData> applicationData;
+    QVector<ComPtr<IApplicationDataContainer>> readContainers;
+    ComPtr<IApplicationDataContainer> writeContainer;
+    EventRegistrationToken dataChangedToken;
+};
+
+QWinRTSettingsPrivate::QWinRTSettingsPrivate(QSettings::Scope scope, const QString &organization,
+                                             const QString &application)
+    : QSettingsPrivate(QSettings::NativeFormat, scope, organization, application)
+    , writeContainer(0)
+{
+    init(scope);
+}
+
+QWinRTSettingsPrivate::QWinRTSettingsPrivate(QString rPath)
+    : QSettingsPrivate(QSettings::NativeFormat, QSettings::UserScope, rPath, QString())
+    , writeContainer(0)
+{
+    init(QSettings::UserScope);
+}
+
+QWinRTSettingsPrivate::~QWinRTSettingsPrivate()
+{
+    clearContainerMaps();
+}
+
+void QWinRTSettingsPrivate::remove(const QString &uKey)
+{
+    int lastIndex = uKey.lastIndexOf(QLatin1Char('/'));
+    QString groupName = (lastIndex > 0) ? uKey.left(lastIndex) : QString();
+    QString groupKey = uKey.mid(lastIndex + 1);
+
+    ComPtr<IApplicationDataContainer> container = getContainer(writeContainer.Get(), groupName, false);
+    if (!container)
+        return;
+
+    HRESULT hr;
+    ComPtr<IPropertySet> values;
+    hr = container->get_Values(&values);
+    if (FAILED(hr))
+        return;
+
+    ComPtr<IMap<HSTRING, IInspectable*>> settingsMap;
+
+    hr = values.As(&settingsMap);
+    if (FAILED(hr))
+        return;
+
+    HStringReference ref((const wchar_t*)groupKey.utf16(), groupKey.size());
+    hr = settingsMap->Remove(ref.Get());
+
+    // groupKey can be a container as well
+    hr = container->DeleteContainer(ref.Get());
+    init(scope);
+}
+
+void QWinRTSettingsPrivate::set(const QString &uKey, const QVariant &value)
+{
+    int lastIndex = uKey.lastIndexOf(QLatin1Char('/'));
+    QString groupName = (lastIndex > 0) ? uKey.left(lastIndex) : QString();
+    QString groupKey = uKey.mid(lastIndex + 1);
+
+    ComPtr<IApplicationDataContainer> container = getContainer(writeContainer.Get(), groupName, true);
+
+    ComPtr<IPropertySet> values;
+    HRESULT hr = container->get_Values(&values);
+    if (FAILED(hr)) {
+        qErrnoWarning(hr, "Could not access Windows container values");
+        setStatus(QSettings::AccessError);
+        return;
+    }
+
+    ComPtr<IMap<HSTRING, IInspectable*>> settingsMap;
+    hr = values.As(&settingsMap);
+    if (FAILED(hr)) {
+        setStatus(QSettings::AccessError);
+        return;
+    }
+
+    ComPtr<IPropertyValueStatics> valueStatics;
+    hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Foundation_PropertyValue).Get(), &valueStatics);
+    if (FAILED(hr)) {
+        setStatus(QSettings::AccessError);
+        return;
+    }
+
+    ComPtr<IInspectable> val;
+
+    switch (value.type()) {
+    case QVariant::List:
+    case QVariant::StringList: {
+        QStringList l = variantListToStringList(value.toList());
+        QStringList::const_iterator it = l.constBegin();
+        bool containsNull = false;
+        for (; it != l.constEnd(); ++it) {
+            if ((*it).length() == 0 || it->indexOf(QChar::Null) != -1) {
+                // We can only store as binary
+                containsNull = true;
+                break;
+            }
+        }
+
+        if (containsNull) {
+            // Store binary
+            const QString s = variantToString(value);
+            hr = valueStatics->CreateUInt8Array(s.length() * 2, (BYTE*) s.utf16(), &val);
+        } else {
+            // Store as native string list
+            int size = l.size();
+            HSTRING *nativeHandleList = new HSTRING[size+1];
+            for (int i = 0; i < size; ++i)
+                hr = WindowsCreateString((const wchar_t*)l[i].utf16(), l[i].size(), &nativeHandleList[i]);
+            // Add end marker
+            hr = WindowsCreateString((const wchar_t*)L"\0\0@", 3, &nativeHandleList[size]);
+            hr = valueStatics->CreateStringArray(size + 1 , nativeHandleList, &val);
+            for (int i = 0; i < size; ++i)
+                hr = WindowsDeleteString(nativeHandleList[i]);
+            delete [] nativeHandleList;
+        }
+        break;
+    }
+    case QVariant::Bool:
+        hr = valueStatics->CreateBoolean(boolean(value.toBool()), &val);
+        break;
+    case QVariant::Int:
+        hr = valueStatics->CreateInt32(INT32(value.toInt()), &val);
+        break;
+    case QVariant::UInt:
+        hr = valueStatics->CreateUInt32(UINT32(value.toUInt()), &val);
+        break;
+    case QVariant::LongLong:
+        hr = valueStatics->CreateInt64(INT64(value.toLongLong()), &val);
+        break;
+    case QVariant::ULongLong:
+        hr = valueStatics->CreateUInt64(UINT64(value.toULongLong()), &val);
+        break;
+    default: {
+        const QString s = variantToString(value);
+        if (s.indexOf(QChar::Null) != -1) {
+            hr = valueStatics->CreateUInt8Array(s.length() * 2, (BYTE*) s.utf16(), &val);
+        } else {
+            HStringReference ref((const wchar_t*)s.utf16(), s.size());
+            hr = valueStatics->CreateString(ref.Get(), &val);
+        }
+
+        break;
+    }
+    }
+
+    RETURN_VOID_IF_FAILED("QSettings: Could not save QVariant value into IInspectable");
+
+    HStringReference key((const wchar_t*)groupKey.utf16(), groupKey.size());
+    boolean rep;
+
+    hr = settingsMap->Insert(key.Get(), val.Get(), &rep);
+    RETURN_VOID_IF_FAILED("QSettings: Could not store value");
+}
+
+bool QWinRTSettingsPrivate::get(const QString &uKey, QVariant *value) const
+{
+    int lastIndex = uKey.lastIndexOf(QLatin1Char('/'));
+    QString groupName = (lastIndex > 0) ? uKey.left(lastIndex) : QString();
+    QString groupKey = uKey.mid(lastIndex + 1);
+
+    HRESULT hr;
+
+    for (int i = 0; i < readContainers.size(); ++i) {
+        ComPtr<IApplicationDataContainer> container = const_cast<QWinRTSettingsPrivate*>(this)->getContainer(readContainers.at(i).Get(), groupName);
+
+        if (!container)
+            continue;
+
+        ComPtr<IPropertySet> values;
+        hr = container->get_Values(&values);
+        if (FAILED(hr))
+            continue;
+
+        ComPtr<IMap<HSTRING, IInspectable*>> settingsMap;
+        hr = values.As(&settingsMap);
+        if (FAILED(hr))
+            continue;
+
+        HStringReference key((const wchar_t*)groupKey.utf16(), groupKey.size());
+        boolean exists;
+
+        hr = settingsMap.Get()->HasKey(key.Get(), &exists);
+        if (FAILED(hr))
+            continue;
+
+        if (!exists) {
+            if (!fallbacks)
+                break;
+            else
+                continue;
+        }
+
+        if (value) {
+            ComPtr<IInspectable> val;
+            hr = settingsMap->Lookup(key.Get(), &val);
+            if (FAILED(hr))
+                return false;
+
+            ComPtr<IPropertyValue> pVal;
+            hr = val.As(&pVal);
+            if (FAILED(hr))
+                return false;
+
+            *value = propertyValueToQVariant(pVal.Get());
+        }
+        return true;
+    }
+    setStatus(QSettings::AccessError);
+    return false;
+}
+
+QStringList QWinRTSettingsPrivate::children(const QString &uKey, ChildSpec spec) const
+{
+    QStringList result;
+    for (int i = 0; i < readContainers.size(); ++i) {
+        ComPtr<IApplicationDataContainer> container = getContainer(readContainers.at(i).Get(), uKey, false);
+        if (!container.Get())
+            continue;
+
+        // Get Keys in this container
+        if (spec == AllKeys || spec == ChildKeys)
+            result += keyNames(container.Get());
+
+        // Get Subcontainer(s)
+        if (spec == AllKeys || spec == ChildGroups) {
+            const QStringList subContainerList = subContainerNames(container.Get(), spec == AllKeys);
+
+            if (spec == AllKeys) {
+                foreach (const QString &item, subContainerList) {
+                    const QString subChildren = uKey.isEmpty() ? item : (uKey + QLatin1Char('/') + item);
+                    const QStringList subResult = children(subChildren, ChildKeys);
+                    foreach (const QString &subItem, subResult)
+                        result += item + QLatin1Char('/') + subItem;
+                }
+            }
+
+            if (spec == ChildGroups)
+                result += subContainerList;
+        }
+
+    }
+    result.removeDuplicates();
+    return result;
+}
+
+void QWinRTSettingsPrivate::clear()
+{
+    ComPtr<IApplicationDataContainer> container;
+    HRESULT hr;
+    if (scope == QSettings::UserScope)
+        hr = applicationData->get_LocalSettings(&container);
+    else
+        hr = applicationData->get_RoamingSettings(&container);
+
+    RETURN_VOID_IF_FAILED("Could not access settings container");
+
+    QString containerName = applicationName.isEmpty() ? organizationName : applicationName;
+    HStringReference containerNativeName((const wchar_t*)containerName.utf16(), containerName.size());
+
+    hr = container->DeleteContainer(containerNativeName.Get());
+    RETURN_VOID_IF_FAILED("Could not delete Container");
+
+    init(scope);
+}
+
+void QWinRTSettingsPrivate::sync()
+{
+    // No native sync available
+}
+
+void QWinRTSettingsPrivate::flush()
+{
+    // No native flush available
+}
+
+QString QWinRTSettingsPrivate::fileName() const
+{
+    Q_UNIMPLEMENTED();
+    return QString();
+}
+
+HRESULT QWinRTSettingsPrivate::onDataChanged(IApplicationData *, IInspectable *)
+{
+    // This only happens, if roaming data is changed by the OS.
+    // To ensure sanity we clean up the map and start from scratch
+    init(scope);
+    return S_OK;
+}
+
+void QWinRTSettingsPrivate::init(QSettings::Scope scope)
+{
+    clearContainerMaps();
+
+    ComPtr<IApplicationDataStatics> applicationDataStatics;
+    HRESULT hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_ApplicationData).Get(), &applicationDataStatics);
+    if (FAILED(hr)) {
+        qErrnoWarning(hr, "Could not access Storage Factory");
+        setStatus(QSettings::AccessError);
+        return;
+    }
+
+    hr = applicationDataStatics->get_Current(&applicationData);
+    if (FAILED(hr)) {
+        qErrnoWarning(hr, "Could not access application data statics");
+        setStatus(QSettings::AccessError);
+        return;
+    }
+
+    const QString organizationString = organizationName.isEmpty() ? QLatin1String("OrganizationDefaults") : organizationName;
+    ComPtr<IApplicationDataContainer> localContainer;
+    if (scope == QSettings::UserScope && SUCCEEDED(applicationData->get_LocalSettings(&localContainer))) {
+        if (!applicationName.isEmpty())
+            readContainers.append(createSubContainer(localContainer.Get(), applicationName));
+        readContainers.append(createSubContainer(localContainer.Get(), organizationString));
+    }
+
+    ComPtr<IApplicationDataContainer> roamingContainer;
+    if (SUCCEEDED(applicationData->get_RoamingSettings(&roamingContainer))) {
+        if (!applicationName.isEmpty())
+            readContainers.append(createSubContainer(roamingContainer.Get(), applicationName));
+        readContainers.append(createSubContainer(roamingContainer.Get(), organizationString));
+    }
+
+    ComPtr<IApplicationDataContainer> writeRootContainer = (scope == QSettings::UserScope) ? localContainer : roamingContainer;
+    if (!applicationName.isEmpty())
+        writeContainer = createSubContainer(writeRootContainer.Get(), applicationName);
+    else
+        writeContainer = createSubContainer(writeRootContainer.Get(), organizationString);
+
+    hr = applicationData->add_DataChanged(Callback<DataHandler>(this, &QWinRTSettingsPrivate::onDataChanged).Get(), &dataChangedToken);
+}
+
+IApplicationDataContainer *QWinRTSettingsPrivate::getContainer(IApplicationDataContainer *parent, const QString &group, bool create) const
+{
+    IApplicationDataContainer *current = parent;
+    if (group.isEmpty())
+        return current;
+    const QStringList groupPath = group.split(QLatin1Char('/'), QString::SkipEmptyParts);
+
+    foreach (const QString &subGroup, groupPath) {
+        ComPtr<IApplicationDataContainer> sub = subContainer(current, subGroup);
+        if (!sub && create)
+            sub = createSubContainer(current, subGroup);
+        if (!sub)
+            return 0; // Something seriously went wrong
+        current = sub.Detach();
+    }
+    return current;
+}
+
+void QWinRTSettingsPrivate::clearContainerMaps()
+{
+    readContainers.clear();
+    writeContainer.Reset();
+}
+
+bool QWinRTSettingsPrivate::isWritable() const
+{
+    return true;
+}
+
+QSettingsPrivate *QSettingsPrivate::create(QSettings::Format format, QSettings::Scope scope,
+                                           const QString &organization, const QString &application)
+{
+    if (format == QSettings::NativeFormat)
+        return new QWinRTSettingsPrivate(scope, organization, application);
+    else
+        return new QConfFileSettingsPrivate(format, scope, organization, application);
+}
+
+QSettingsPrivate *QSettingsPrivate::create(const QString &fileName, QSettings::Format format)
+{
+    if (format == QSettings::NativeFormat)
+        return new QWinRTSettingsPrivate(fileName);
+    else
+        return new QConfFileSettingsPrivate(fileName, format);
+}
+
+QT_END_NAMESPACE
+#endif // QT_NO_SETTINGS
diff --git a/src/corelib/io/qstandardpaths.cpp b/src/corelib/io/qstandardpaths.cpp
index bd9fa68d93..2583e46ad8 100644
--- a/src/corelib/io/qstandardpaths.cpp
+++ b/src/corelib/io/qstandardpaths.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -117,10 +109,9 @@ QT_BEGIN_NAMESPACE
     \value HomeLocation Returns the user's home directory (the same as QDir::homePath()). On Unix
            systems, this is equal to the HOME environment variable. This value might be
            generic or application-specific, but the returned path is never empty.
-    \value DataLocation Returns a directory location where persistent
-           application data can be stored. This is an application-specific directory. To obtain a
-           path to store data to be shared with other applications, use
-           QStandardPaths::GenericDataLocation. The returned path is never empty.
+    \value DataLocation Returns the same value as AppLocalDataLocation. This enumeration value
+           is deprecated. Using AppDataLocation is preferable since on Windows, the roaming path is
+           recommended.
     \value CacheLocation Returns a directory location where user-specific
            non-essential (cached) data should be written. This is an application-specific directory.
            The returned path is never empty.
@@ -142,6 +133,15 @@ QT_BEGIN_NAMESPACE
     \value GenericConfigLocation Returns a directory location where user-specific
            configuration files shared between multiple applications should be written.
            This is a generic value and the returned path is never empty.
+    \value AppDataLocation Returns a directory location where persistent
+           application data can be stored. This is an application-specific directory.
+           To obtain a path to store data to be shared with other applications, use
+           QStandardPaths::GenericDataLocation. The returned path is never empty.
+           On the Windows operating system, this returns the roaming path.
+           This enum value was added in Qt 5.4.
+    \value AppLocalDataLocation Returns the local settings path on the Windows operating
+           system. On all other platforms, it returns the same value as AppDataLocation.
+           This enum value was added in Qt 5.4.
 
     The following table gives examples of paths on different operating systems.
     The first path is the writable path (unless noted). Other, additional
@@ -200,6 +200,12 @@ QT_BEGIN_NAMESPACE
     \row \li GenericCacheLocation
          \li "~/Library/Caches", "/Library/Caches"
          \li "C:/Users/<USER>/AppData/Local/cache"
+    \row \li AppDataLocation
+         \li "~/Library/Application Support/<APPNAME>", "/Library/Application Support/<APPNAME>". "<APPDIR>/../Resources"
+         \li "C:/Users/<USER>/AppData/Roaming/<APPNAME>", "C:/ProgramData/<APPNAME>", "<APPDIR>", "<APPDIR>/data"
+    \row \li AppLocalDataLocation
+         \li "~/Library/Application Support/<APPNAME>", "/Library/Application Support/<APPNAME>". "<APPDIR>/../Resources"
+         \li "C:/Users/<USER>/AppData/Local/<APPNAME>", "C:/ProgramData/<APPNAME>", "<APPDIR>", "<APPDIR>/data"
     \endtable
 
     \table
@@ -255,6 +261,12 @@ QT_BEGIN_NAMESPACE
     \row \li GenericCacheLocation
          \li "<APPROOT>/data/Cache" (there is no shared cache)
          \li "~/.cache"
+    \row \li AppDataLocation
+         \li "<APPROOT>/data", "<APPROOT>/app/native/assets"
+         \li "~/.local/share/<APPNAME>", "/usr/local/share/<APPNAME>", "/usr/share/<APPNAME>"
+    \row \li AppLocalDataLocation
+         \li "<APPROOT>/data", "<APPROOT>/app/native/assets"
+         \li "~/.local/share/<APPNAME>", "/usr/local/share/<APPNAME>", "/usr/share/<APPNAME>"
     \endtable
 
     \table
@@ -293,6 +305,8 @@ QT_BEGIN_NAMESPACE
          \li "<USER>/Downloads", "<USER>/<APPNAME>/Downloads"
     \row \li GenericCacheLocation
          \li "<APPROOT>/cache" (there is no shared cache)
+    \row \li AppDataLocation
+         \li "<APPROOT>/files", "<USER>/<APPNAME>/files"
     \endtable
 
     In the table above, \c <APPNAME> is usually the organization name, the
@@ -534,8 +548,6 @@ QString QStandardPaths::displayName(StandardLocation type)
         return QCoreApplication::translate("QStandardPaths", "Temporary Directory");
     case HomeLocation:
         return QCoreApplication::translate("QStandardPaths", "Home");
-    case DataLocation:
-        return QCoreApplication::translate("QStandardPaths", "Application Data");
     case CacheLocation:
         return QCoreApplication::translate("QStandardPaths", "Cache");
     case GenericDataLocation:
@@ -550,6 +562,9 @@ QString QStandardPaths::displayName(StandardLocation type)
         return QCoreApplication::translate("QStandardPaths", "Shared Cache");
     case DownloadLocation:
         return QCoreApplication::translate("QStandardPaths", "Download");
+    case AppDataLocation:
+    case AppLocalDataLocation:
+        return QCoreApplication::translate("QStandardPaths", "Application Data");
     }
     // not reached
     return QString();
diff --git a/src/corelib/io/qstandardpaths.h b/src/corelib/io/qstandardpaths.h
index 08d6d7b50c..e305450240 100644
--- a/src/corelib/io/qstandardpaths.h
+++ b/src/corelib/io/qstandardpaths.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,7 +62,9 @@ public:
         ConfigLocation,
         DownloadLocation,
         GenericCacheLocation,
-        GenericConfigLocation
+        GenericConfigLocation,
+        AppDataLocation,
+        AppLocalDataLocation = DataLocation
     };
 
     static QString writableLocation(StandardLocation type);
diff --git a/src/corelib/io/qstandardpaths_android.cpp b/src/corelib/io/qstandardpaths_android.cpp
index 60b285a3d6..958b4ea486 100644
--- a/src/corelib/io/qstandardpaths_android.cpp
+++ b/src/corelib/io/qstandardpaths_android.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -244,7 +236,8 @@ QString QStandardPaths::writableLocation(StandardLocation type)
         return getFilesDir() + testDir() + QLatin1String("/settings");
     case QStandardPaths::GenericDataLocation:
         return getExternalStorageDirectory() + testDir();
-    case QStandardPaths::DataLocation:
+    case QStandardPaths::AppDataLocation:
+    case QStandardPaths::AppLocalDataLocation:
         return getFilesDir() + testDir();
     case QStandardPaths::GenericCacheLocation:
     case QStandardPaths::RuntimeLocation:
@@ -301,7 +294,7 @@ QStringList QStandardPaths::standardLocations(StandardLocation type)
                              << getExternalFilesDir("DIRECTORY_DOWNLOADS");
     }
 
-    if (type == DataLocation) {
+    if (type == AppDataLocation || type == AppLocalDataLocation) {
         return QStringList() << writableLocation(type)
                              << getExternalFilesDir();
     }
diff --git a/src/corelib/io/qstandardpaths_blackberry.cpp b/src/corelib/io/qstandardpaths_blackberry.cpp
index ec2e61bd15..02d7c110ae 100644
--- a/src/corelib/io/qstandardpaths_blackberry.cpp
+++ b/src/corelib/io/qstandardpaths_blackberry.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,7 +55,8 @@ QString QStandardPaths::writableLocation(StandardLocation type)
     const QString sharedRoot = sharedDir.absolutePath();
 
     switch (type) {
-    case DataLocation:
+    case AppDataLocation:
+    case AppLocalDataLocation:
         return QDir::homePath() + testModeInsert();
     case DesktopLocation:
     case HomeLocation:
@@ -108,7 +101,7 @@ QStringList QStandardPaths::standardLocations(StandardLocation type)
     if (type == FontsLocation)
         return QStringList(QLatin1String("/base/usr/fonts"));
 
-    if (type == DataLocation)
+    if (type == AppDataLocation || type == AppLocalDataLocation)
         dirs.append(QDir::homePath() + testModeInsert() + QLatin1String("native/assets"));
 
     const QString localDir = writableLocation(type);
diff --git a/src/corelib/io/qstandardpaths_ios.mm b/src/corelib/io/qstandardpaths_ios.mm
index e2100045a6..cdca28b8b5 100644
--- a/src/corelib/io/qstandardpaths_ios.mm
+++ b/src/corelib/io/qstandardpaths_ios.mm
@@ -90,7 +90,8 @@ QString QStandardPaths::writableLocation(StandardLocation type)
     case HomeLocation:
         location = bundlePath();
         break;
-    case DataLocation:
+    case AppDataLocation:
+    case AppLocalDataLocation:
     case GenericDataLocation:
         location = pathForDirectory(NSDocumentDirectory);
         break;
diff --git a/src/corelib/io/qstandardpaths_mac.cpp b/src/corelib/io/qstandardpaths_mac.cpp
index aff9112fb7..673b734d40 100644
--- a/src/corelib/io/qstandardpaths_mac.cpp
+++ b/src/corelib/io/qstandardpaths_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -83,7 +75,8 @@ OSType translateLocation(QStandardPaths::StandardLocation type)
         return kTemporaryFolderType;
     case QStandardPaths::GenericDataLocation:
     case QStandardPaths::RuntimeLocation:
-    case QStandardPaths::DataLocation:
+    case QStandardPaths::AppDataLocation:
+    case QStandardPaths::AppLocalDataLocation:
         return kApplicationSupportFolderType;
     case QStandardPaths::GenericCacheLocation:
     case QStandardPaths::CacheLocation:
@@ -128,7 +121,7 @@ static QString macLocation(QStandardPaths::StandardLocation type, short domain)
 
    QString path = getFullPath(ref);
 
-    if (type == QStandardPaths::DataLocation || type == QStandardPaths::CacheLocation)
+    if (type == QStandardPaths::AppDataLocation || type == QStandardPaths::AppLocalDataLocation || type == QStandardPaths::CacheLocation)
         appendOrganizationAndApp(path);
     return path;
 }
@@ -140,9 +133,10 @@ QString QStandardPaths::writableLocation(StandardLocation type)
         QString path;
         switch (type) {
         case GenericDataLocation:
-        case DataLocation:
+        case AppDataLocation:
+        case AppLocalDataLocation:
             path = qttestDir + QLatin1String("/Application Support");
-            if (type == DataLocation)
+            if (type != GenericDataLocation)
                 appendOrganizationAndApp(path);
             return path;
         case GenericCacheLocation:
@@ -165,7 +159,7 @@ QString QStandardPaths::writableLocation(StandardLocation type)
     case TempLocation:
         return QDir::tempPath();
     case GenericDataLocation:
-    case DataLocation:
+    case AppLocalDataLocation:
     case GenericCacheLocation:
     case CacheLocation:
     case RuntimeLocation:
@@ -179,13 +173,13 @@ QStringList QStandardPaths::standardLocations(StandardLocation type)
 {
     QStringList dirs;
 
-    if (type == GenericDataLocation || type == DataLocation || type == GenericCacheLocation || type == CacheLocation) {
+    if (type == GenericDataLocation || type == AppDataLocation || type == AppLocalDataLocation || type == GenericCacheLocation || type == CacheLocation) {
         const QString path = macLocation(type, kOnAppropriateDisk);
         if (!path.isEmpty())
             dirs.append(path);
     }
 
-    if (type == DataLocation) {
+    if (type == AppDataLocation || type == AppLocalDataLocation) {
         CFBundleRef mainBundle = CFBundleGetMainBundle();
         if (mainBundle) {
             CFURLRef bundleUrl = CFBundleCopyBundleURL(mainBundle);
diff --git a/src/corelib/io/qstandardpaths_unix.cpp b/src/corelib/io/qstandardpaths_unix.cpp
index e2ed7c3766..469c223b00 100644
--- a/src/corelib/io/qstandardpaths_unix.cpp
+++ b/src/corelib/io/qstandardpaths_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -90,7 +82,8 @@ QString QStandardPaths::writableLocation(StandardLocation type)
             appendOrganizationAndApp(xdgCacheHome);
         return xdgCacheHome;
     }
-    case DataLocation:
+    case AppDataLocation:
+    case AppLocalDataLocation:
     case GenericDataLocation:
     {
         QString xdgDataHome = QFile::decodeName(qgetenv("XDG_DATA_HOME"));
@@ -98,7 +91,7 @@ QString QStandardPaths::writableLocation(StandardLocation type)
             xdgDataHome = QDir::homePath() + QLatin1String("/.qttest/share");
         if (xdgDataHome.isEmpty())
             xdgDataHome = QDir::homePath() + QLatin1String("/.local/share");
-        if (type == QStandardPaths::DataLocation)
+        if (type == AppDataLocation || type == AppLocalDataLocation)
             appendOrganizationAndApp(xdgDataHome);
         return xdgDataHome;
     }
@@ -305,7 +298,8 @@ QStringList QStandardPaths::standardLocations(StandardLocation type)
         for (int i = 0; i < dirs.count(); ++i)
             dirs[i].append(QLatin1String("/applications"));
         break;
-    case DataLocation:
+    case AppDataLocation:
+    case AppLocalDataLocation:
         dirs = xdgDataDirs();
         for (int i = 0; i < dirs.count(); ++i)
             appendOrganizationAndApp(dirs[i]);
diff --git a/src/corelib/io/qstandardpaths_win.cpp b/src/corelib/io/qstandardpaths_win.cpp
index 062ab49207..5e56db3797 100644
--- a/src/corelib/io/qstandardpaths_win.cpp
+++ b/src/corelib/io/qstandardpaths_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,6 +73,18 @@ static QString convertCharArray(const wchar_t *path)
     return QDir::fromNativeSeparators(QString::fromWCharArray(path));
 }
 
+static inline int clsidForAppDataLocation(QStandardPaths::StandardLocation type)
+{
+#ifndef Q_OS_WINCE
+    return type == QStandardPaths::AppDataLocation ?
+        CSIDL_APPDATA :      // "Roaming" path
+        CSIDL_LOCAL_APPDATA; // Local path
+#else
+    Q_UNUSED(type)
+    return CSIDL_APPDATA;
+#endif
+}
+
 QString QStandardPaths::writableLocation(StandardLocation type)
 {
     QString result;
@@ -92,15 +96,12 @@ QString QStandardPaths::writableLocation(StandardLocation type)
     wchar_t path[MAX_PATH];
 
     switch (type) {
-    case ConfigLocation: // same as DataLocation, on Windows (oversight, but too late to fix it)
-    case GenericConfigLocation: // same as GenericDataLocation, on Windows
-    case DataLocation:
+    case ConfigLocation: // same as AppLocalDataLocation, on Windows
+    case GenericConfigLocation: // same as GenericDataLocation on Windows
+    case AppDataLocation:
+    case AppLocalDataLocation:
     case GenericDataLocation:
-#if defined Q_OS_WINCE
-        if (SHGetSpecialFolderPath(0, path, CSIDL_APPDATA, FALSE))
-#else
-        if (SHGetSpecialFolderPath(0, path, CSIDL_LOCAL_APPDATA, FALSE))
-#endif
+        if (SHGetSpecialFolderPath(0, path, clsidForAppDataLocation(type), FALSE))
             result = convertCharArray(path);
         if (isTestModeEnabled())
             result += QLatin1String("/qttest");
@@ -165,7 +166,7 @@ QString QStandardPaths::writableLocation(StandardLocation type)
         // Although Microsoft has a Cache key it is a pointer to IE's cache, not a cache
         // location for everyone.  Most applications seem to be using a
         // cache directory located in their AppData directory
-        return writableLocation(DataLocation) + QLatin1String("/cache");
+        return writableLocation(AppLocalDataLocation) + QLatin1String("/cache");
 
     case GenericCacheLocation:
         return writableLocation(GenericDataLocation) + QLatin1String("/cache");
@@ -192,11 +193,12 @@ QStringList QStandardPaths::standardLocations(StandardLocation type)
     {
         wchar_t path[MAX_PATH];
         switch (type) {
-        case ConfigLocation: // same as DataLocation, on Windows (oversight, but too late to fix it)
+        case ConfigLocation: // same as AppLocalDataLocation, on Windows (oversight, but too late to fix it)
         case GenericConfigLocation: // same as GenericDataLocation, on Windows
-        case DataLocation:
+        case AppDataLocation:
+        case AppLocalDataLocation:
         case GenericDataLocation:
-            if (SHGetSpecialFolderPath(0, path, CSIDL_COMMON_APPDATA, FALSE)) {
+            if (SHGetSpecialFolderPath(0, path, clsidForAppDataLocation(type), FALSE)) {
                 QString result = convertCharArray(path);
                 if (type != GenericDataLocation && type != GenericConfigLocation) {
 #ifndef QT_BOOTSTRAPPED
diff --git a/src/corelib/io/qstandardpaths_winrt.cpp b/src/corelib/io/qstandardpaths_winrt.cpp
index feafdf2e7c..5c09b4814d 100644
--- a/src/corelib/io/qstandardpaths_winrt.cpp
+++ b/src/corelib/io/qstandardpaths_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,9 +65,10 @@ QString QStandardPaths::writableLocation(StandardLocation type)
     QString result;
 
     switch (type) {
-    case ConfigLocation: // same as DataLocation, on Windows
+    case ConfigLocation: // same as AppLocalDataLocation, on Windows
     case GenericConfigLocation: // same as GenericDataLocation, on Windows
-    case DataLocation:
+    case AppDataLocation:
+    case AppLocalDataLocation:
     case GenericDataLocation: {
         ComPtr<IApplicationDataStatics> applicationDataStatics;
         if (FAILED(GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_ApplicationData).Get(), &applicationDataStatics)))
@@ -98,7 +91,7 @@ QString QStandardPaths::writableLocation(StandardLocation type)
         break;
     }
     case CacheLocation:
-        return writableLocation(DataLocation) + QLatin1String("/cache");
+        return writableLocation(AppLocalDataLocation) + QLatin1String("/cache");
 
     case GenericCacheLocation:
         return writableLocation(GenericDataLocation) + QLatin1String("/cache");
diff --git a/src/corelib/io/qstorageinfo.cpp b/src/corelib/io/qstorageinfo.cpp
new file mode 100644
index 0000000000..388b71b39c
--- /dev/null
+++ b/src/corelib/io/qstorageinfo.cpp
@@ -0,0 +1,398 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qstorageinfo.h"
+#include "qstorageinfo_p.h"
+
+QT_BEGIN_NAMESPACE
+
+/*!
+    \class QStorageInfo
+    \inmodule QtCore
+    \since 5.4
+    \brief Provides information about currently mounted storage and drives.
+
+    \ingroup io
+    \ingroup shared
+
+    Allows retrieving information about the volume's space, its mount point,
+    label, and filesystem name.
+
+    You can create an instance of QStorageInfo by passing the path to the
+    volume's mount point as a constructor parameter, or you can set it using
+    the setPath() method. The static mountedVolumes() method can be used to get the
+    list of all mounted filesystems.
+
+    QStorageInfo always caches the retrieved information, but you can call
+    refresh() to invalidate the cache.
+
+    The following example retrieves the most common information about the root
+    volume of the system, and prints information about it.
+
+    \snippet code/src_corelib_io_qstorageinfo.cpp 2
+*/
+
+/*!
+    Constructs an empty QStorageInfo object.
+
+    Objects created with the default constructor will be invalid and therefore
+    not ready for use.
+
+    \sa setPath(), isReady(), isValid()
+*/
+QStorageInfo::QStorageInfo()
+    : d(new QStorageInfoPrivate)
+{
+}
+
+/*!
+    Constructs a new QStorageInfo object that gives information about the volume
+    mounted at \a path.
+
+    If you pass a directory or file, the QStorageInfo object will refer to the
+    volume where this directory or file is located.
+    You can check if the created object is correct using the isValid() method.
+
+    The following example shows how to get the volume on which the application is
+    located. It is recommended to always check that the volume is ready and valid.
+
+    \snippet code/src_corelib_io_qstorageinfo.cpp 0
+
+    \sa setPath()
+*/
+QStorageInfo::QStorageInfo(const QString &path)
+    : d(new QStorageInfoPrivate)
+{
+    setPath(path);
+}
+
+/*!
+    Constructs a new QStorageInfo object that gives information about the volume
+    containing the \a dir folder.
+*/
+QStorageInfo::QStorageInfo(const QDir &dir)
+    : d(new QStorageInfoPrivate)
+{
+    setPath(dir.absolutePath());
+}
+
+/*!
+    Constructs a new QStorageInfo object that is a copy of the \a other QStorageInfo object.
+*/
+QStorageInfo::QStorageInfo(const QStorageInfo &other)
+    : d(other.d)
+{
+}
+
+/*!
+    Destroys the QStorageInfo object and frees its resources.
+*/
+QStorageInfo::~QStorageInfo()
+{
+}
+
+/*!
+    Makes a copy of the QStorageInfo object \a other and assigns it to this QStorageInfo object.
+*/
+QStorageInfo &QStorageInfo::operator=(const QStorageInfo &other)
+{
+    d = other.d;
+    return *this;
+}
+
+/*!
+    \fn QStorageInfo &QStorageInfo::operator=(QStorageInfo &&other)
+
+    Assigns \a other to this QStorageInfo instance.
+*/
+
+/*!
+    \fn void QStorageInfo::swap(QStorageInfo &other)
+
+    Swaps this volume info with \a other. This function is very fast and
+    never fails.
+*/
+
+/*!
+    Sets this QStorageInfo object to the filesystem mounted where \a path is located.
+
+    \a path can either be a root path of the filesystem, a directory, or a file
+    within that filesystem.
+
+    \sa rootPath()
+*/
+void QStorageInfo::setPath(const QString &path)
+{
+    if (d->rootPath == path)
+        return;
+    d.detach();
+    d->rootPath = path;
+    d->doStat();
+}
+
+/*!
+    Returns the mount point of the filesystem this QStorageInfo object
+    represents.
+
+    On Windows, it returns the volume letter in case the volume is not mounted to
+    a directory.
+
+    Note that the value returned by rootPath() is the real mount point of a
+    volume, and may not be equal to the value passed to the constructor or setPath()
+    method. For example, if you have only the root volume in the system, and
+    pass '/directory' to setPath(), then this method will return '/'.
+
+    \sa setPath(), device()
+*/
+QString QStorageInfo::rootPath() const
+{
+    return d->rootPath;
+}
+
+/*!
+    Returns the size (in bytes) available for the current user. It returns
+    the total size available if the user is the root user or a system administrator.
+
+    This size can be less than or equal to the free size returned by
+    bytesFree() function.
+
+    \sa bytesTotal(), bytesFree()
+*/
+qint64 QStorageInfo::bytesAvailable() const
+{
+    return d->bytesAvailable;
+}
+
+/*!
+    Returns the number of free bytes in a volume. Note that if there are
+    quotas on the filesystem, this value can be larger than the value
+    returned by bytesAvailable().
+
+    \sa bytesTotal(), bytesAvailable()
+*/
+qint64 QStorageInfo::bytesFree() const
+{
+    return d->bytesFree;
+}
+
+/*!
+    Returns the total volume size in bytes.
+
+    \sa bytesFree(), bytesAvailable()
+*/
+qint64 QStorageInfo::bytesTotal() const
+{
+    return d->bytesTotal;
+}
+
+/*!
+    Returns the type name of the filesystem.
+
+    This is a platform-dependent function, and filesystem names can vary
+    between different operating systems. For example, on Windows filesystems
+    they can be named \c NTFS, and on Linux they can be named \c ntfs-3g or \c fuseblk.
+
+    \sa name()
+*/
+QByteArray QStorageInfo::fileSystemType() const
+{
+    return d->fileSystemType;
+}
+
+/*!
+    Returns the device for this volume.
+
+    For example, on Unix filesystems (including OS X), this returns the
+    devpath like \c /dev/sda0 for local storages. On Windows, it returns the UNC
+    path starting with \c \\\\?\\ for local storages (in other words, the volume GUID).
+
+    \sa rootPath()
+*/
+QByteArray QStorageInfo::device() const
+{
+    return d->device;
+}
+
+/*!
+    Returns the human-readable name of a filesystem, usually called \c label.
+
+    Not all filesystems support this feature. In this case, the value returned by
+    this method could be empty. An empty string is returned if the file system
+    does not support labels, or if no label is set.
+
+    On Linux, retrieving the volume's label requires \c udev to be present in the
+    system.
+
+    \sa fileSystemType()
+*/
+QString QStorageInfo::name() const
+{
+    return d->name;
+}
+
+/*!
+    Returns the volume's name, if available, or the root path if not.
+*/
+QString QStorageInfo::displayName() const
+{
+    if (!d->name.isEmpty())
+        return d->name;
+    return d->rootPath;
+}
+
+/*!
+    \fn bool QStorageInfo::isRoot() const
+
+    Returns true if this QStorageInfo represents the system root volume; false
+    otherwise.
+
+    On Unix filesystems, the root volume is a volume mounted on \c /. On Windows,
+    the root volume is the volume where the OS is installed.
+
+    \sa root()
+*/
+
+/*!
+    Returns true if the current filesystem is protected from writing; false
+    otherwise.
+*/
+bool QStorageInfo::isReadOnly() const
+{
+    return d->readOnly;
+}
+
+/*!
+    Returns true if the current filesystem is ready to work; false otherwise. For
+    example, false is returned if the CD volume is not inserted.
+
+    Note that fileSystemType(), name(), bytesTotal(), bytesFree(), and
+    bytesAvailable() will return invalid data until the volume is ready.
+
+    \sa isValid()
+*/
+bool QStorageInfo::isReady() const
+{
+    return d->ready;
+}
+
+/*!
+    Returns true if the QStorageInfo specified by rootPath exists and is mounted
+    correctly.
+
+    \sa isReady()
+*/
+bool QStorageInfo::isValid() const
+{
+    return d->valid;
+}
+
+/*!
+    Resets QStorageInfo's internal cache.
+
+    QStorageInfo caches information about storage to speed up performance.
+    QStorageInfo retrieves information during object construction and/or when calling
+    the setPath() method. You have to manually reset the cache by calling this
+    function to update storage information.
+*/
+void QStorageInfo::refresh()
+{
+    d.detach();
+    d->doStat();
+}
+
+/*!
+    Returns the list of QStorageInfo objects that corresponds to the list of currently
+    mounted filesystems.
+
+    On Windows, this returns the drives visible in the \gui{My Computer} folder. On Unix
+    operating systems, it returns the list of all mounted filesystems (except for
+    pseudo filesystems).
+
+    Returns all currently mounted filesystems by default.
+
+    The example shows how to retrieve all available filesystems, skipping read-only ones.
+
+    \snippet code/src_corelib_io_qstorageinfo.cpp 1
+
+    \sa root()
+*/
+QList<QStorageInfo> QStorageInfo::mountedVolumes()
+{
+    return QStorageInfoPrivate::mountedVolumes();
+}
+
+Q_GLOBAL_STATIC_WITH_ARGS(QStorageInfo, getRoot, (QStorageInfoPrivate::root()))
+
+/*!
+    Returns a QStorageInfo object that represents the system root volume.
+
+    On Unix systems this call returns the root ('/') volume; in Windows the volume where
+    the operating system is installed.
+
+    \sa isRoot()
+*/
+QStorageInfo QStorageInfo::root()
+{
+    return *getRoot();
+}
+
+/*!
+    \fn inline bool operator==(const QStorageInfo &first, const QStorageInfo &second)
+
+    \relates QStorageInfo
+
+    Returns true if the \a first QStorageInfo object refers to the same drive or volume
+    as the \a second; otherwise it returns false.
+
+    Note that the result of comparing two invalid QStorageInfo objects is always
+    positive.
+*/
+
+/*!
+    \fn inline bool operator!=(const QStorageInfo &first, const QStorageInfo &second)
+
+    \relates QStorageInfo
+
+    Returns true if the \a first QStorageInfo object refers to a different drive or
+    volume than the \a second; otherwise returns false.
+*/
+
+QT_END_NAMESPACE
diff --git a/src/corelib/io/qstorageinfo.h b/src/corelib/io/qstorageinfo.h
new file mode 100644
index 0000000000..0a4a620205
--- /dev/null
+++ b/src/corelib/io/qstorageinfo.h
@@ -0,0 +1,122 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QSTORAGEINFO_H
+#define QSTORAGEINFO_H
+
+#include <QtCore/qbytearray.h>
+#include <QtCore/qdir.h>
+#include <QtCore/qlist.h>
+#include <QtCore/qmetatype.h>
+#include <QtCore/qstring.h>
+#include <QtCore/qshareddata.h>
+
+QT_BEGIN_NAMESPACE
+
+class QStorageInfoPrivate;
+class Q_CORE_EXPORT QStorageInfo
+{
+public:
+    QStorageInfo();
+    explicit QStorageInfo(const QString &path);
+    explicit QStorageInfo(const QDir &dir);
+    QStorageInfo(const QStorageInfo &other);
+    ~QStorageInfo();
+
+    QStorageInfo &operator=(const QStorageInfo &other);
+#ifdef Q_COMPILER_RVALUE_REFS
+    inline QStorageInfo &operator=(QStorageInfo &&other)
+    { qSwap(d, other.d); return *this; }
+#endif
+
+    inline void swap(QStorageInfo &other)
+    { qSwap(d, other.d); }
+
+    void setPath(const QString &path);
+
+    QString rootPath() const;
+    QByteArray device() const;
+    QByteArray fileSystemType() const;
+    QString name() const;
+    QString displayName() const;
+
+    qint64 bytesTotal() const;
+    qint64 bytesFree() const;
+    qint64 bytesAvailable() const;
+
+    inline bool isRoot() const;
+    bool isReadOnly() const;
+    bool isReady() const;
+    bool isValid() const;
+
+    void refresh();
+
+    static QList<QStorageInfo> mountedVolumes();
+    static QStorageInfo root();
+
+private:
+    friend class QStorageInfoPrivate;
+    friend bool operator==(const QStorageInfo &first, const QStorageInfo &second);
+    QExplicitlySharedDataPointer<QStorageInfoPrivate> d;
+};
+
+inline bool operator==(const QStorageInfo &first, const QStorageInfo &second)
+{
+    if (first.d == second.d)
+        return true;
+    return first.device() == second.device();
+}
+
+inline bool operator!=(const QStorageInfo &first, const QStorageInfo &second)
+{
+    return !(first == second);
+}
+
+inline bool QStorageInfo::isRoot() const
+{ return *this == QStorageInfo::root(); }
+
+Q_DECLARE_SHARED(QStorageInfo)
+
+QT_END_NAMESPACE
+
+Q_DECLARE_METATYPE(QStorageInfo)
+
+#endif // QSTORAGEINFO_H
diff --git a/src/corelib/io/qstorageinfo_mac.cpp b/src/corelib/io/qstorageinfo_mac.cpp
new file mode 100644
index 0000000000..060e16b948
--- /dev/null
+++ b/src/corelib/io/qstorageinfo_mac.cpp
@@ -0,0 +1,213 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qstorageinfo_p.h"
+
+#include <QtCore/qfileinfo.h>
+#include <QtCore/private/qcore_mac_p.h>
+
+#include <CoreFoundation/CoreFoundation.h>
+#include <CoreFoundation/CFURLEnumerator.h>
+
+#include <sys/mount.h>
+
+#define QT_STATFSBUF struct statfs
+#define QT_STATFS    ::statfs
+
+QT_BEGIN_NAMESPACE
+
+void QStorageInfoPrivate::initRootPath()
+{
+    rootPath = QFileInfo(rootPath).canonicalFilePath();
+
+    if (rootPath.isEmpty())
+        return;
+
+    retrieveUrlProperties(true);
+}
+
+void QStorageInfoPrivate::doStat()
+{
+    initRootPath();
+
+    if (rootPath.isEmpty())
+        return;
+
+    retrieveLabel();
+    retrievePosixInfo();
+    retrieveUrlProperties();
+}
+
+void QStorageInfoPrivate::retrievePosixInfo()
+{
+    QT_STATFSBUF statfs_buf;
+    int result = QT_STATFS(QFile::encodeName(rootPath).constData(), &statfs_buf);
+    if (result == 0) {
+        device = QByteArray(statfs_buf.f_mntfromname);
+        readOnly = (statfs_buf.f_flags & MNT_RDONLY) != 0;
+        fileSystemType = QByteArray(statfs_buf.f_fstypename);
+    }
+}
+
+static inline qint64 CFDictionaryGetInt64(CFDictionaryRef dictionary, const void *key)
+{
+    CFNumberRef cfNumber = (CFNumberRef)CFDictionaryGetValue(dictionary, key);
+    if (!cfNumber)
+        return -1;
+    qint64 result;
+    bool ok = CFNumberGetValue(cfNumber, kCFNumberSInt64Type, &result);
+    if (!ok)
+        return -1;
+    return result;
+}
+
+void QStorageInfoPrivate::retrieveUrlProperties(bool initRootPath)
+{
+    static const void *rootPathKeys[] = { kCFURLVolumeURLKey };
+    static const void *propertyKeys[] = {
+        // kCFURLVolumeNameKey, // 10.7
+        // kCFURLVolumeLocalizedNameKey, // 10.7
+        kCFURLVolumeTotalCapacityKey,
+        kCFURLVolumeAvailableCapacityKey,
+        // kCFURLVolumeIsReadOnlyKey // 10.7
+    };
+    size_t size = (initRootPath ? sizeof(rootPathKeys) : sizeof(propertyKeys)) / sizeof(void*);
+    QCFType<CFArrayRef> keys = CFArrayCreate(kCFAllocatorDefault,
+                                             initRootPath ? rootPathKeys : propertyKeys,
+                                             size,
+                                             Q_NULLPTR);
+
+    if (!keys)
+        return;
+
+    const QCFString cfPath = rootPath;
+    if (initRootPath)
+        rootPath.clear();
+
+    QCFType<CFURLRef> url = CFURLCreateWithFileSystemPath(kCFAllocatorDefault,
+                                                          cfPath,
+                                                          kCFURLPOSIXPathStyle,
+                                                          true);
+    if (!url)
+        return;
+
+    CFErrorRef error;
+    QCFType<CFDictionaryRef> map = CFURLCopyResourcePropertiesForKeys(url, keys, &error);
+
+    if (!map)
+        return;
+
+    if (initRootPath) {
+        const CFURLRef rootUrl = (CFURLRef)CFDictionaryGetValue(map, kCFURLVolumeURLKey);
+        if (!rootUrl)
+            return;
+
+        rootPath = QCFString(CFURLCopyFileSystemPath(rootUrl, kCFURLPOSIXPathStyle));
+        valid = true;
+        ready = true;
+
+        return;
+    }
+
+    bytesTotal = CFDictionaryGetInt64(map, kCFURLVolumeTotalCapacityKey);
+    bytesAvailable = CFDictionaryGetInt64(map, kCFURLVolumeAvailableCapacityKey);
+    bytesFree = bytesAvailable;
+}
+
+void QStorageInfoPrivate::retrieveLabel()
+{
+#if !defined(Q_OS_IOS)
+    // deprecated since 10.8
+    FSRef ref;
+    FSPathMakeRef(reinterpret_cast<const UInt8*>(QFile::encodeName(rootPath).constData()),
+                  &ref,
+                  Q_NULLPTR);
+
+    // deprecated since 10.8
+    FSCatalogInfo catalogInfo;
+    OSErr error;
+    error = FSGetCatalogInfo(&ref, kFSCatInfoVolume, &catalogInfo, Q_NULLPTR, Q_NULLPTR, Q_NULLPTR);
+    if (error != noErr)
+        return;
+
+    // deprecated (use CFURLCopyResourcePropertiesForKeys for 10.7 and higher)
+    HFSUniStr255 volumeName;
+    error = FSGetVolumeInfo(catalogInfo.volume,
+                            0,
+                            Q_NULLPTR,
+                            kFSVolInfoFSInfo,
+                            Q_NULLPTR,
+                            &volumeName,
+                            Q_NULLPTR);
+    if (error == noErr)
+        name = QCFString(FSCreateStringFromHFSUniStr(Q_NULLPTR, &volumeName));
+#endif
+}
+
+QList<QStorageInfo> QStorageInfoPrivate::mountedVolumes()
+{
+    QList<QStorageInfo> volumes;
+
+    QCFType<CFURLEnumeratorRef> enumerator;
+    enumerator = CFURLEnumeratorCreateForMountedVolumes(Q_NULLPTR,
+                                                        kCFURLEnumeratorSkipInvisibles,
+                                                        Q_NULLPTR);
+
+    CFURLEnumeratorResult result = kCFURLEnumeratorSuccess;
+    do {
+        CFURLRef url;
+        CFErrorRef error;
+        result = CFURLEnumeratorGetNextURL(enumerator, &url, &error);
+        if (result == kCFURLEnumeratorSuccess) {
+            const QCFString urlString = CFURLCopyFileSystemPath(url, kCFURLPOSIXPathStyle);
+            volumes.append(QStorageInfo(urlString));
+        }
+    } while (result != kCFURLEnumeratorEnd);
+
+    return volumes;
+}
+
+QStorageInfo QStorageInfoPrivate::root()
+{
+    return QStorageInfo(QStringLiteral("/"));
+}
+
+QT_END_NAMESPACE
diff --git a/src/widgets/widgets/qcalendartextnavigator_p.h b/src/corelib/io/qstorageinfo_p.h
index 88bd3c6a71..9c8e51f475 100644
--- a/src/widgets/widgets/qcalendartextnavigator_p.h
+++ b/src/corelib/io/qstorageinfo_p.h
@@ -1,9 +1,9 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
 ** Contact: http://www.qt-project.org/legal
 **
-** This file is part of the QtWidgets module of the Qt Toolkit.
+** This file is part of the QtCore module of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:LGPL$
 ** Commercial License Usage
@@ -39,8 +39,8 @@
 **
 ****************************************************************************/
 
-#ifndef QCALENDARTEXTNAVIGATOR_P_H
-#define QCALENDARTEXTNAVIGATOR_P_H
+#ifndef QSTORAGEINFO_P_H
+#define QSTORAGEINFO_P_H
 
 //
 //  W A R N I N G
@@ -53,60 +53,51 @@
 // We mean it.
 //
 
-#include <QtCore/qobject.h>
-#include <QtCore/qdatetime.h>
-#include <QtCore/qbasictimer.h>
-
-#ifndef QT_NO_CALENDARWIDGET
+#include "qstorageinfo.h"
 
 QT_BEGIN_NAMESPACE
 
-class QLabel;
-class QCalendarDateValidator;
-class QFrame;
-
-class QCalendarTextNavigator: public QObject
+class QStorageInfoPrivate : public QSharedData
 {
-    Q_OBJECT
 public:
-    QCalendarTextNavigator(QObject *parent = 0)
-        : QObject(parent), m_dateText(0), m_dateFrame(0), m_dateValidator(0), m_widget(0), m_editDelay(1500), m_date(QDate::currentDate()) { }
-
-    QWidget *widget() const;
-    void setWidget(QWidget *widget);
-
-    int dateEditAcceptDelay() const;
-    void setDateEditAcceptDelay(int delay);
-
-    QDate date() const;
-    void setDate(const QDate &date);
-
-    bool eventFilter(QObject *o, QEvent *e);
-    void timerEvent(QTimerEvent *e);
-
-signals:
-    void dateChanged(const QDate &date);
-    void editingFinished();
-
-private:
-    void applyDate();
-    void updateDateLabel();
-    void createDateLabel();
-    void removeDateLabel();
-
-    QLabel *m_dateText;
-    QFrame *m_dateFrame;
-    QBasicTimer m_acceptTimer;
-    QCalendarDateValidator *m_dateValidator;
-    QWidget *m_widget;
-    int m_editDelay;
+    inline QStorageInfoPrivate() : QSharedData(),
+        bytesTotal(0), bytesFree(0), bytesAvailable(0),
+        readOnly(false), ready(false), valid(false)
+    {}
+
+    void initRootPath();
+    void doStat();
+
+    static QList<QStorageInfo> mountedVolumes();
+    static QStorageInfo root();
+
+protected:
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
+    void retreiveVolumeInfo();
+    void retreiveDiskFreeSpace();
+#elif defined(Q_OS_MAC)
+    void retrievePosixInfo();
+    void retrieveUrlProperties(bool initRootPath = false);
+    void retrieveLabel();
+#elif defined(Q_OS_UNIX)
+    void retreiveVolumeInfo();
+#endif
 
-    QDate m_date;
+public:
+    QString rootPath;
+    QByteArray device;
+    QByteArray fileSystemType;
+    QString name;
+
+    qint64 bytesTotal;
+    qint64 bytesFree;
+    qint64 bytesAvailable;
+
+    bool readOnly;
+    bool ready;
+    bool valid;
 };
 
 QT_END_NAMESPACE
 
-#endif // QT_NO_CALENDARWIDGET
-
-#endif
-
+#endif // QSTORAGEINFO_P_H
diff --git a/src/corelib/io/qstorageinfo_stub.cpp b/src/corelib/io/qstorageinfo_stub.cpp
new file mode 100644
index 0000000000..3c8b0a8e09
--- /dev/null
+++ b/src/corelib/io/qstorageinfo_stub.cpp
@@ -0,0 +1,61 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qstorageinfo_p.h"
+
+QT_BEGIN_NAMESPACE
+
+void QStorageInfoPrivate::initRootPath()
+{
+    Q_UNIMPLEMENTED();
+    rootPath = QString();
+}
+
+void QStorageInfoPrivate::doStat()
+{
+    Q_UNIMPLEMENTED();
+}
+
+QList<QStorageInfo> QStorageInfoPrivate::mountedVolumes()
+{
+    Q_UNIMPLEMENTED();
+    return QList<QStorageInfo>();
+}
+
+QStorageInfo QStorageInfoPrivate::root()
+{
+    Q_UNIMPLEMENTED();
+    return QStorageInfo();
+}
+
+QT_END_NAMESPACE
diff --git a/src/corelib/io/qstorageinfo_unix.cpp b/src/corelib/io/qstorageinfo_unix.cpp
new file mode 100644
index 0000000000..b22358ed27
--- /dev/null
+++ b/src/corelib/io/qstorageinfo_unix.cpp
@@ -0,0 +1,456 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qstorageinfo_p.h"
+
+#include <QtCore/qdiriterator.h>
+#include <QtCore/qfileinfo.h>
+#include <QtCore/qtextstream.h>
+
+#include <QtCore/private/qcore_unix_p.h>
+
+#include <errno.h>
+#include <sys/stat.h>
+
+#if defined(Q_OS_BSD4)
+#  include <sys/mount.h>
+#elif defined(Q_OS_ANDROID)
+#  include <sys/mount.h>
+#  include <sys/vfs.h>
+#  include <mntent.h>
+#elif defined(Q_OS_QNX)
+#  include <sys/statvfs.h>
+#elif defined(Q_OS_LINUX)
+#  include <mntent.h>
+#  include <sys/statvfs.h>
+#elif defined(Q_OS_SOLARIS)
+#  include <sys/mnttab.h>
+#endif
+
+#if defined(Q_OS_BSD4)
+#  define QT_STATFSBUF struct statvfs
+#  define QT_STATFS    ::statvfs
+#elif defined(Q_OS_ANDROID)
+#  define QT_STATFS    ::statfs
+#  define QT_STATFSBUF struct statfs
+#  if !defined(ST_RDONLY)
+#    define ST_RDONLY 1 // hack for missing define on Android
+#  endif
+#else
+#  if defined(QT_LARGEFILE_SUPPORT)
+#    define QT_STATFSBUF struct statvfs64
+#    define QT_STATFS    ::statvfs64
+#  else
+#    define QT_STATFSBUF struct statvfs
+#    define QT_STATFS    ::statvfs
+#  endif // QT_LARGEFILE_SUPPORT
+#endif // Q_OS_BSD4
+
+QT_BEGIN_NAMESPACE
+
+static bool isPseudoFs(const QString &mountDir, const QByteArray &type)
+{
+    if (mountDir.startsWith(QStringLiteral("/dev"))
+        || mountDir.startsWith(QStringLiteral("/proc"))
+        || mountDir.startsWith(QStringLiteral("/run"))
+        || mountDir.startsWith(QStringLiteral("/sys"))
+        || mountDir.startsWith(QStringLiteral("/var/run"))
+        || mountDir.startsWith(QStringLiteral("/var/lock"))) {
+        return true;
+    }
+#if defined(Q_OS_LINUX)
+    if (type == "rootfs")
+        return true;
+#else
+    Q_UNUSED(type);
+#endif
+
+    return false;
+}
+
+class QStorageIterator
+{
+public:
+    QStorageIterator();
+    ~QStorageIterator();
+
+    inline bool isValid() const;
+    inline bool next();
+    inline QString rootPath() const;
+    inline QByteArray fileSystemType() const;
+    inline QByteArray device() const;
+private:
+#if defined(Q_OS_BSD4)
+    statfs *stat_buf;
+    int entryCount;
+    int currentIndex;
+#elif defined(Q_OS_SOLARIS)
+    FILE *fp;
+    mnttab mnt;
+#elif defined(Q_OS_ANDROID)
+    QFile file;
+    QByteArray m_rootPath;
+    QByteArray m_fileSystemType;
+    QByteArray m_device;
+#elif defined(Q_OS_LINUX)
+    FILE *fp;
+    mntent mnt;
+    QByteArray buffer;
+#endif
+};
+
+#if defined(Q_OS_BSD4)
+
+inline QStorageIterator::QStorageIterator()
+    : entryCount(::getmntinfo(&stat_buf, 0)),
+      currentIndex(-1)
+{
+}
+
+inline QStorageIterator::~QStorageIterator()
+{
+}
+
+inline bool QStorageIterator::isValid() const
+{
+    return entryCount != -1;
+}
+
+inline bool QStorageIterator::next()
+{
+    return ++currentIndex < entryCount;
+}
+
+inline QString QStorageIterator::rootPath() const
+{
+    return QFile::decodeName(stat_buf[currentIndex].f_mntonname);
+}
+
+inline QByteArray QStorageIterator::fileSystemType() const
+{
+    return QByteArray(stat_buf[currentIndex].f_fstypename);
+}
+
+inline QByteArray QStorageIterator::device() const
+{
+    return QByteArray(stat_buf[currentIndex].f_mntfromname);
+}
+
+#elif defined(Q_OS_SOLARIS)
+
+static const char pathMounted[] = "/etc/mnttab";
+
+inline QStorageIterator::QStorageIterator()
+{
+    const int fd = qt_safe_open(pathMounted, O_RDONLY);
+    fp = ::fdopen(fd, "r");
+}
+
+inline QStorageIterator::~QStorageIterator()
+{
+    if (fp)
+        ::fclose(fp);
+}
+
+inline bool QStorageIterator::isValid() const
+{
+    return fp != Q_NULLPTR;
+}
+
+inline bool QStorageIterator::next()
+{
+    return ::getmntent(fp, &mnt) == Q_NULLPTR;
+}
+
+inline QString QStorageIterator::rootPath() const
+{
+    return QFile::decodeName(mnt->mnt_mountp);
+}
+
+inline QByteArray QStorageIterator::fileSystemType() const
+{
+    return QByteArray(mnt->mnt_fstype);
+}
+
+inline QByteArray QStorageIterator::device() const
+{
+    return QByteArray(mnt->mnt_mntopts);
+}
+
+#elif defined(Q_OS_ANDROID)
+
+static const char pathMounted[] = "/proc/mounts";
+
+inline QStorageIterator::QStorageIterator()
+{
+    file.setFileName(pathMounted);
+    file.open(QIODevice::ReadOnly | QIODevice::Text);
+}
+
+inline QStorageIterator::~QStorageIterator()
+{
+}
+
+inline bool QStorageIterator::isValid() const
+{
+    return file.isOpen();
+}
+
+inline bool QStorageIterator::next()
+{
+    QList<QByteArray> data;
+    do {
+        const QByteArray line = file.readLine();
+        data = line.split(' ');
+    } while (data.count() < 3 && !file.atEnd());
+
+    if (file.atEnd())
+        return false;
+    m_device = data.at(0);
+    m_rootPath = data.at(1);
+    m_fileSystemType = data.at(2);
+
+    return true;
+}
+
+inline QString QStorageIterator::rootPath() const
+{
+    return QFile::decodeName(m_rootPath);
+}
+
+inline QByteArray QStorageIterator::fileSystemType() const
+{
+    return m_fileSystemType;
+}
+
+inline QByteArray QStorageIterator::device() const
+{
+    return m_device;
+}
+
+#elif defined(Q_OS_LINUX)
+
+static const char pathMounted[] = "/etc/mtab";
+static const int bufferSize = 3*PATH_MAX; // 2 paths (mount point+device) and metainfo
+
+inline QStorageIterator::QStorageIterator() :
+    buffer(QByteArray(bufferSize, 0))
+{
+    fp = ::setmntent(pathMounted, "r");
+}
+
+inline QStorageIterator::~QStorageIterator()
+{
+    if (fp)
+        ::endmntent(fp);
+}
+
+inline bool QStorageIterator::isValid() const
+{
+    return fp != Q_NULLPTR;
+}
+
+inline bool QStorageIterator::next()
+{
+    return ::getmntent_r(fp, &mnt, buffer.data(), buffer.size()) != Q_NULLPTR;
+}
+
+inline QString QStorageIterator::rootPath() const
+{
+    return QFile::decodeName(mnt.mnt_dir);
+}
+
+inline QByteArray QStorageIterator::fileSystemType() const
+{
+    return QByteArray(mnt.mnt_type);
+}
+
+inline QByteArray QStorageIterator::device() const
+{
+    return QByteArray(mnt.mnt_fsname);
+}
+
+#else
+
+inline QStorageIterator::QStorageIterator()
+{
+}
+
+inline QStorageIterator::~QStorageIterator()
+{
+}
+
+inline bool QStorageIterator::isValid() const
+{
+    return false;
+}
+
+inline bool QStorageIterator::next()
+{
+    return false;
+}
+
+inline QString QStorageIterator::rootPath() const
+{
+    return QString();
+}
+
+inline QByteArray QStorageIterator::fileSystemType() const
+{
+    return QByteArray();
+}
+
+inline QByteArray QStorageIterator::device() const
+{
+    return QByteArray();
+}
+
+#endif
+
+void QStorageInfoPrivate::initRootPath()
+{
+    rootPath = QFileInfo(rootPath).canonicalFilePath();
+
+    if (rootPath.isEmpty())
+        return;
+
+    QStorageIterator it;
+    if (!it.isValid()) {
+        rootPath = QStringLiteral("/");
+        return;
+    }
+
+    int maxLength = 0;
+    const QString oldRootPath = rootPath;
+    rootPath.clear();
+
+    while (it.next()) {
+        const QString mountDir = it.rootPath();
+        const QByteArray fsName = it.fileSystemType();
+        if (isPseudoFs(mountDir, fsName))
+            continue;
+        // we try to find most suitable entry
+        if (oldRootPath.startsWith(mountDir) && maxLength < mountDir.length()) {
+            maxLength = mountDir.length();
+            rootPath = mountDir;
+            device = it.device();
+            fileSystemType = fsName;
+        }
+    }
+}
+
+static inline QString retrieveLabel(const QByteArray &device)
+{
+#ifdef Q_OS_LINUX
+    static const char pathDiskByLabel[] = "/dev/disk/by-label";
+
+    QDirIterator it(QLatin1String(pathDiskByLabel), QDir::NoDotAndDotDot);
+    while (it.hasNext()) {
+        it.next();
+        QFileInfo fileInfo(it.fileInfo());
+        if (fileInfo.isSymLink() && fileInfo.symLinkTarget().toLocal8Bit() == device)
+            return fileInfo.fileName();
+    }
+#else
+    Q_UNUSED(device);
+#endif
+
+    return QString();
+}
+
+void QStorageInfoPrivate::doStat()
+{
+    initRootPath();
+    if (rootPath.isEmpty())
+        return;
+
+    retreiveVolumeInfo();
+    name = retrieveLabel(device);
+}
+
+void QStorageInfoPrivate::retreiveVolumeInfo()
+{
+    QT_STATFSBUF statfs_buf;
+    int result;
+    EINTR_LOOP(result, QT_STATFS(QFile::encodeName(rootPath).constData(), &statfs_buf));
+    if (result == 0) {
+        valid = true;
+        ready = true;
+
+        bytesTotal = statfs_buf.f_blocks * statfs_buf.f_bsize;
+        bytesFree = statfs_buf.f_bfree * statfs_buf.f_bsize;
+        bytesAvailable = statfs_buf.f_bavail * statfs_buf.f_bsize;
+#if defined(Q_OS_ANDROID)
+#if defined(_STATFS_F_FLAGS)
+        readOnly = (statfs_buf.f_flags & ST_RDONLY) != 0;
+#endif
+#else
+        readOnly = (statfs_buf.f_flag & ST_RDONLY) != 0;
+#endif
+    }
+}
+
+QList<QStorageInfo> QStorageInfoPrivate::mountedVolumes()
+{
+    QStorageIterator it;
+    if (!it.isValid())
+        return QList<QStorageInfo>() << root();
+
+    QList<QStorageInfo> volumes;
+
+    while (it.next()) {
+        const QString mountDir = it.rootPath();
+        const QByteArray fsName = it.fileSystemType();
+        if (isPseudoFs(mountDir, fsName))
+            continue;
+
+        volumes.append(QStorageInfo(mountDir));
+    }
+
+    return volumes;
+}
+
+QStorageInfo QStorageInfoPrivate::root()
+{
+    return QStorageInfo(QStringLiteral("/"));
+}
+
+QT_END_NAMESPACE
diff --git a/src/corelib/io/qstorageinfo_win.cpp b/src/corelib/io/qstorageinfo_win.cpp
new file mode 100644
index 0000000000..aa970778e6
--- /dev/null
+++ b/src/corelib/io/qstorageinfo_win.cpp
@@ -0,0 +1,193 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Ivan Komissarov <ABBAPOH@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qstorageinfo_p.h"
+
+#include <QtCore/qdir.h>
+#include <QtCore/qfileinfo.h>
+#include <QtCore/qvarlengtharray.h>
+
+#include <Windows.h>
+
+QT_BEGIN_NAMESPACE
+
+static const int defaultBufferSize = MAX_PATH + 1;
+
+void QStorageInfoPrivate::initRootPath()
+{
+    rootPath = QFileInfo(rootPath).canonicalFilePath();
+
+    if (rootPath.isEmpty())
+        return;
+
+    QString path = QDir::toNativeSeparators(rootPath);
+    rootPath.clear();
+
+    if (path.startsWith(QStringLiteral("\\\\?\\")))
+        path.remove(0, 4);
+    if (path.length() < 2 || path.at(1) != QLatin1Char(':'))
+        return;
+    path[0] = path[0].toUpper();
+    if (!(path.at(0).unicode() >= 'A' && path.at(0).unicode() <= 'Z'))
+        return;
+    if (!path.endsWith(QLatin1Char('\\')))
+        path.append(QLatin1Char('\\'));
+
+    // ### test if disk mounted to folder on other disk
+    wchar_t buffer[defaultBufferSize];
+    if (::GetVolumePathName(reinterpret_cast<const wchar_t *>(path.utf16()), buffer, defaultBufferSize))
+        rootPath = QDir::fromNativeSeparators(QString::fromWCharArray(buffer));
+}
+
+static inline QByteArray getDevice(const QString &rootPath)
+{
+    const QString path = QDir::toNativeSeparators(rootPath);
+    const UINT type = ::GetDriveType(reinterpret_cast<const wchar_t *>(path.utf16()));
+    if (type == DRIVE_REMOTE) {
+        QVarLengthArray<char, 256> buffer(256);
+        DWORD bufferLength = buffer.size();
+        DWORD result;
+        UNIVERSAL_NAME_INFO *remoteNameInfo;
+        do {
+            buffer.resize(bufferLength);
+            remoteNameInfo = reinterpret_cast<UNIVERSAL_NAME_INFO *>(buffer.data());
+            result = ::WNetGetUniversalName(reinterpret_cast<const wchar_t *>(path.utf16()),
+                                            UNIVERSAL_NAME_INFO_LEVEL,
+                                            remoteNameInfo,
+                                            &bufferLength);
+        } while (result == ERROR_MORE_DATA);
+        if (result == NO_ERROR)
+            return QString::fromWCharArray(remoteNameInfo->lpUniversalName).toUtf8();
+        return QByteArray();
+    }
+
+    wchar_t deviceBuffer[51];
+    if (::GetVolumeNameForVolumeMountPoint(reinterpret_cast<const wchar_t *>(path.utf16()),
+                                           deviceBuffer,
+                                           sizeof(deviceBuffer) / sizeof(wchar_t))) {
+        return QString::fromWCharArray(deviceBuffer).toLatin1();
+    }
+    return QByteArray();
+}
+
+void QStorageInfoPrivate::doStat()
+{
+    initRootPath();
+    if (rootPath.isEmpty())
+        return;
+
+    retreiveVolumeInfo();
+    device = getDevice(rootPath);
+    retreiveDiskFreeSpace();
+}
+
+void QStorageInfoPrivate::retreiveVolumeInfo()
+{
+    const UINT oldmode = ::SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+    const QString path = QDir::toNativeSeparators(rootPath);
+    wchar_t nameBuffer[defaultBufferSize];
+    wchar_t fileSystemTypeBuffer[defaultBufferSize];
+    DWORD fileSystemFlags = 0;
+    const bool result = ::GetVolumeInformation(reinterpret_cast<const wchar_t *>(path.utf16()),
+                                               nameBuffer,
+                                               defaultBufferSize,
+                                               Q_NULLPTR,
+                                               Q_NULLPTR,
+                                               &fileSystemFlags,
+                                               fileSystemTypeBuffer,
+                                               defaultBufferSize);
+    if (!result) {
+        ready = false;
+        valid = ::GetLastError() == ERROR_NOT_READY;
+    } else {
+        ready = true;
+        valid = true;
+
+        fileSystemType = QString::fromWCharArray(fileSystemTypeBuffer).toLatin1();
+        name = QString::fromWCharArray(nameBuffer);
+
+        readOnly = (fileSystemFlags & FILE_READ_ONLY_VOLUME) != 0;
+    }
+
+    ::SetErrorMode(oldmode);
+}
+
+void QStorageInfoPrivate::retreiveDiskFreeSpace()
+{
+    const UINT oldmode = ::SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+    const QString path = QDir::toNativeSeparators(rootPath);
+    ::GetDiskFreeSpaceEx(reinterpret_cast<const wchar_t *>(path.utf16()),
+                         PULARGE_INTEGER(&bytesAvailable),
+                         PULARGE_INTEGER(&bytesTotal),
+                         PULARGE_INTEGER(&bytesFree));
+
+    ::SetErrorMode(oldmode);
+}
+
+QList<QStorageInfo> QStorageInfoPrivate::mountedVolumes()
+{
+    QList<QStorageInfo> volumes;
+
+    QString driveName = QStringLiteral("A:/");
+    const UINT oldmode = ::SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+    quint32 driveBits = quint32(::GetLogicalDrives()) & 0x3ffffff;
+    ::SetErrorMode(oldmode);
+    while (driveBits) {
+        if (driveBits & 1) {
+            QStorageInfo drive(driveName);
+            if (!drive.rootPath().isEmpty()) // drive exists, but not mounted
+                volumes.append(drive);
+        }
+        driveName[0] = driveName[0].unicode() + 1;
+        driveBits = driveBits >> 1;
+    }
+
+    return volumes;
+}
+
+QStorageInfo QStorageInfoPrivate::root()
+{
+    return QStorageInfo(QDir::fromNativeSeparators(QFile::decodeName(qgetenv("SystemDrive"))));
+}
+
+QT_END_NAMESPACE
diff --git a/src/corelib/io/qtemporarydir.cpp b/src/corelib/io/qtemporarydir.cpp
index 1e615956d7..7ce37fd320 100644
--- a/src/corelib/io/qtemporarydir.cpp
+++ b/src/corelib/io/qtemporarydir.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qtemporarydir.h b/src/corelib/io/qtemporarydir.h
index 47252cb5e5..cdd7fd42ca 100644
--- a/src/corelib/io/qtemporarydir.h
+++ b/src/corelib/io/qtemporarydir.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qtemporaryfile.cpp b/src/corelib/io/qtemporaryfile.cpp
index d88ffb7c84..4a9aafcf0b 100644
--- a/src/corelib/io/qtemporaryfile.cpp
+++ b/src/corelib/io/qtemporaryfile.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -235,6 +227,8 @@ static bool createFileFromTemplate(NativeFileHandle &file,
 //************* QTemporaryFileEngine
 QTemporaryFileEngine::~QTemporaryFileEngine()
 {
+    Q_D(QFSFileEngine);
+    d->unmapAll();
     QFSFileEngine::close();
 }
 
@@ -363,6 +357,7 @@ bool QTemporaryFileEngine::remove()
     Q_D(QFSFileEngine);
     // Since the QTemporaryFileEngine::close() does not really close the file,
     // we must explicitly call QFSFileEngine::close() before we remove it.
+    d->unmapAll();
     QFSFileEngine::close();
     if (QFSFileEngine::remove()) {
         d->fileEntry.clear();
diff --git a/src/corelib/io/qtemporaryfile.h b/src/corelib/io/qtemporaryfile.h
index 09aa53c33b..908cc231af 100644
--- a/src/corelib/io/qtemporaryfile.h
+++ b/src/corelib/io/qtemporaryfile.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qtemporaryfile_p.h b/src/corelib/io/qtemporaryfile_p.h
index 46e9d169f4..ab3f8dd24f 100644
--- a/src/corelib/io/qtemporaryfile_p.h
+++ b/src/corelib/io/qtemporaryfile_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qtextstream.cpp b/src/corelib/io/qtextstream.cpp
index b67df6a4a6..66727e7dc4 100644
--- a/src/corelib/io/qtextstream.cpp
+++ b/src/corelib/io/qtextstream.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -2203,7 +2195,7 @@ void QTextStreamPrivate::putNumber(qulonglong number, bool negative)
 
     // add thousands group separators. For backward compatibility we
     // don't add a group separator for C locale.
-    if (locale != QLocale::c())
+    if (locale != QLocale::c() && !locale.numberOptions().testFlag(QLocale::OmitGroupSeparator))
         flags |= QLocaleData::ThousandsGroup;
 
     const QLocaleData *dd = locale.d->m_data;
@@ -2414,6 +2406,8 @@ QTextStream &QTextStream::operator<<(double f)
         flags |= QLocaleData::CapitalEorX;
     if (numberFlags() & ForcePoint)
         flags |= QLocaleData::Alternate;
+    if (locale() != QLocale::c() && !(locale().numberOptions() & QLocale::OmitGroupSeparator))
+        flags |= QLocaleData::ThousandsGroup;
 
     const QLocaleData *dd = d->locale.d->m_data;
     QString num = dd->doubleToString(f, d->params.realNumberPrecision, form, -1, flags);
diff --git a/src/corelib/io/qtextstream.h b/src/corelib/io/qtextstream.h
index 6d143bdca7..5c75a006af 100644
--- a/src/corelib/io/qtextstream.h
+++ b/src/corelib/io/qtextstream.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qtextstream_p.h b/src/corelib/io/qtextstream_p.h
index ac6529e195..5f99f44cc2 100644
--- a/src/corelib/io/qtextstream_p.h
+++ b/src/corelib/io/qtextstream_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qtldurl.cpp b/src/corelib/io/qtldurl.cpp
index dd4301e9f1..d0205c3be5 100644
--- a/src/corelib/io/qtldurl.cpp
+++ b/src/corelib/io/qtldurl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,7 +35,8 @@
 #include "qurl.h"
 #include "private/qurltlds_p.h"
 #include "private/qtldurl_p.h"
-#include "QtCore/qstringlist.h"
+#include "QtCore/qstring.h"
+#include "QtCore/qvector.h"
 #include "QtCore/qhash.h"
 
 QT_BEGIN_NAMESPACE
@@ -80,7 +73,8 @@ static bool containsTLDEntry(const QString &entry)
 
 Q_CORE_EXPORT QString qTopLevelDomain(const QString &domain)
 {
-    QStringList sections = domain.toLower().split(QLatin1Char('.'), QString::SkipEmptyParts);
+    const QString domainLower = domain.toLower();
+    QVector<QStringRef> sections = domainLower.splitRef(QLatin1Char('.'), QString::SkipEmptyParts);
     if (sections.isEmpty())
         return QString();
 
diff --git a/src/corelib/io/qtldurl_p.h b/src/corelib/io/qtldurl_p.h
index 184a8182a0..904b1007d3 100644
--- a/src/corelib/io/qtldurl_p.h
+++ b/src/corelib/io/qtldurl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qurl.cpp b/src/corelib/io/qurl.cpp
index c109fc4d3a..d4c5e03058 100644
--- a/src/corelib/io/qurl.cpp
+++ b/src/corelib/io/qurl.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -364,6 +356,29 @@
 */
 
 /*!
+    \enum QUrl::UserInputResolutionOption
+    \since 5.4
+
+    The user input resolution options define how fromUserInput() should
+    interpret strings that could either be a relative path or the short
+    form of a HTTP URL. For instance \c{file.pl} can be either a local file
+    or the URL \c{http://file.pl}.
+
+    \value DefaultResolution  The default resolution mechanism is to check
+                              whether a local file exists, in the working
+                              directory given to fromUserInput, and only
+                              return a local path in that case. Otherwise a URL
+                              is assumed.
+    \value AssumeLocalFile    This option makes fromUserInput() always return
+                              a local path unless the input contains a scheme, such as
+                              \c{http://file.pl}. This is useful for applications
+                              such as text editors, which are able to create
+                              the file if it doesn't exist.
+
+    \sa fromUserInput()
+*/
+
+/*!
     \fn QUrl::QUrl(QUrl &&other)
 
     Move-constructs a QUrl instance, making it point at the same
@@ -3714,11 +3729,15 @@ bool QUrl::isDetached() const
     "//servername/path/to/file.txt". Note that only certain platforms can
     actually open this file using QFile::open().
 
+    An empty \a localFile leads to an empty URL (since Qt 5.4).
+
     \sa toLocalFile(), isLocalFile(), QDir::toNativeSeparators()
 */
 QUrl QUrl::fromLocalFile(const QString &localFile)
 {
     QUrl url;
+    if (localFile.isEmpty())
+        return url;
     url.setScheme(fileScheme());
     QString deslashified = QDir::fromNativeSeparators(localFile);
 
@@ -4060,6 +4079,11 @@ static QUrl adjustFtpPath(QUrl url)
     return url;
 }
 
+static bool isIp6(const QString &text)
+{
+    QIPAddressUtils::IPv6Address address;
+    return !text.isEmpty() && QIPAddressUtils::parseIp6(address, text.begin(), text.end()) == 0;
+}
 
 // The following code has the following copyright:
 /*
@@ -4094,6 +4118,53 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     Returns a valid URL from a user supplied \a userInput string if one can be
     deducted. In the case that is not possible, an invalid QUrl() is returned.
 
+    This overload takes a \a workingDirectory path, in order to be able to
+    handle relative paths. This is especially useful when handling command
+    line arguments.
+    If \a workingDirectory is empty, no handling of relative paths will be done,
+    so this method will behave like its one argument overload.
+
+    By default, an input string that looks like a relative path will only be treated
+    as such if the file actually exists in the given working directory.
+
+    If the application can handle files that don't exist yet, it should pass the
+    flag AssumeLocalFile in \a options.
+
+    \since 5.4
+*/
+QUrl QUrl::fromUserInput(const QString &userInput, const QString &workingDirectory,
+                         UserInputResolutionOptions options)
+{
+    QString trimmedString = userInput.trimmed();
+
+    if (trimmedString.isEmpty())
+        return QUrl();
+
+
+    // Check for IPv6 addresses, since a path starting with ":" is absolute (a resource)
+    // and IPv6 addresses can start with "c:" too
+    if (isIp6(trimmedString)) {
+        QUrl url;
+        url.setHost(trimmedString);
+        url.setScheme(QStringLiteral("http"));
+        return url;
+    }
+
+    QUrl url = QUrl(trimmedString, QUrl::TolerantMode);
+    // Check both QUrl::isRelative (to detect full URLs) and QDir::isAbsolutePath (since on Windows drive letters can be interpreted as schemes)
+    if (url.isRelative() && !QDir::isAbsolutePath(trimmedString)) {
+        QFileInfo fileInfo(QDir(workingDirectory), trimmedString);
+        if ((options & AssumeLocalFile) || fileInfo.exists())
+            return QUrl::fromLocalFile(fileInfo.absoluteFilePath());
+    }
+
+    return fromUserInput(trimmedString);
+}
+
+/*!
+    Returns a valid URL from a user supplied \a userInput string if one can be
+    deducted. In the case that is not possible, an invalid QUrl() is returned.
+
     \since 4.6
 
     Most applications that can browse the web, allow the user to input a URL
@@ -4125,6 +4196,15 @@ QUrl QUrl::fromUserInput(const QString &userInput)
 {
     QString trimmedString = userInput.trimmed();
 
+    // Check for IPv6 addresses, since a path starting with ":" is absolute (a resource)
+    // and IPv6 addresses can start with "c:" too
+    if (isIp6(trimmedString)) {
+        QUrl url;
+        url.setHost(trimmedString);
+        url.setScheme(QStringLiteral("http"));
+        return url;
+    }
+
     // Check first for files, since on Windows drive letters can be interpretted as schemes
     if (QDir::isAbsolutePath(trimmedString))
         return QUrl::fromLocalFile(trimmedString);
diff --git a/src/corelib/io/qurl.h b/src/corelib/io/qurl.h
index 602e91ce30..abf96f5fcd 100644
--- a/src/corelib/io/qurl.h
+++ b/src/corelib/io/qurl.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -199,7 +191,16 @@ public:
     QByteArray toEncoded(FormattingOptions options = FullyEncoded) const;
     static QUrl fromEncoded(const QByteArray &url, ParsingMode mode = TolerantMode);
 
+    enum UserInputResolutionOption {
+        DefaultResolution,
+        AssumeLocalFile
+    };
+    Q_DECLARE_FLAGS(UserInputResolutionOptions, UserInputResolutionOption)
+
     static QUrl fromUserInput(const QString &userInput);
+    // ### Qt6 merge with fromUserInput(QString), by adding = QString()
+    static QUrl fromUserInput(const QString &userInput, const QString &workingDirectory,
+                              UserInputResolutionOptions options = DefaultResolution);
 
     bool isValid() const;
     QString errorString() const;
diff --git a/src/corelib/io/qurl_p.h b/src/corelib/io/qurl_p.h
index 9c8fe1cfc6..b2bc206c73 100644
--- a/src/corelib/io/qurl_p.h
+++ b/src/corelib/io/qurl_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qurlidna.cpp b/src/corelib/io/qurlidna.cpp
index 4e9b257c7b..00b9dc5e0d 100644
--- a/src/corelib/io/qurlidna.cpp
+++ b/src/corelib/io/qurlidna.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qurlquery.cpp b/src/corelib/io/qurlquery.cpp
index 9ed17671ce..451f2c0ca7 100644
--- a/src/corelib/io/qurlquery.cpp
+++ b/src/corelib/io/qurlquery.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qurlquery.h b/src/corelib/io/qurlquery.h
index c515bf78c7..8c2bffc25c 100644
--- a/src/corelib/io/qurlquery.h
+++ b/src/corelib/io/qurlquery.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qurlrecode.cpp b/src/corelib/io/qurlrecode.cpp
index 74a981b654..9aad2a12bd 100644
--- a/src/corelib/io/qurlrecode.cpp
+++ b/src/corelib/io/qurlrecode.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qwindowspipereader.cpp b/src/corelib/io/qwindowspipereader.cpp
index d8a3ec9b42..e932fc0c02 100644
--- a/src/corelib/io/qwindowspipereader.cpp
+++ b/src/corelib/io/qwindowspipereader.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qwindowspipereader_p.h b/src/corelib/io/qwindowspipereader_p.h
index 78ac8eb76d..ecc6974efa 100644
--- a/src/corelib/io/qwindowspipereader_p.h
+++ b/src/corelib/io/qwindowspipereader_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qwindowspipewriter.cpp b/src/corelib/io/qwindowspipewriter.cpp
index daad542705..afa7d28f35 100644
--- a/src/corelib/io/qwindowspipewriter.cpp
+++ b/src/corelib/io/qwindowspipewriter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qwindowspipewriter_p.h b/src/corelib/io/qwindowspipewriter_p.h
index 62cd49d66a..47b7744e81 100644
--- a/src/corelib/io/qwindowspipewriter_p.h
+++ b/src/corelib/io/qwindowspipewriter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/io/qwinoverlappedionotifier.cpp b/src/corelib/io/qwinoverlappedionotifier.cpp
index 33583afb78..de0e205d26 100644
--- a/src/corelib/io/qwinoverlappedionotifier.cpp
+++ b/src/corelib/io/qwinoverlappedionotifier.cpp
@@ -1,46 +1,39 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qwinoverlappedionotifier_p.h"
 #include <qdebug.h>
+#include <qelapsedtimer.h>
 #include <qmutex.h>
 #include <qpointer.h>
 #include <qqueue.h>
@@ -293,35 +286,58 @@ void QWinOverlappedIoNotifier::setEnabled(bool enabled)
 }
 
 /*!
- * Wait synchronously for the notified signal.
+ * Wait synchronously for any notified signal.
  *
- * The function returns true if the notified signal was emitted for
- * the I/O operation that corresponds to the OVERLAPPED object.
+ * The function returns a pointer to the OVERLAPPED object corresponding to the completed I/O
+ * operation. In case no I/O operation was completed during the \a msec timeout, this function
+ * returns a null pointer.
  */
-bool QWinOverlappedIoNotifier::waitForNotified(int msecs, OVERLAPPED *overlapped)
+OVERLAPPED *QWinOverlappedIoNotifier::waitForAnyNotified(int msecs)
 {
     Q_D(QWinOverlappedIoNotifier);
     if (!d->iocp->isRunning()) {
-        qWarning("Called QWinOverlappedIoNotifier::waitForNotified on inactive notifier.");
-        return false;
+        qWarning("Called QWinOverlappedIoNotifier::waitForAnyNotified on inactive notifier.");
+        return 0;
+    }
+
+    if (msecs == 0)
+        d->iocp->drainQueue();
+
+    switch (WaitForSingleObject(d->hSemaphore, msecs == -1 ? INFINITE : DWORD(msecs))) {
+    case WAIT_OBJECT_0:
+        ReleaseSemaphore(d->hSemaphore, 1, NULL);
+        return d->_q_notified();
+    case WAIT_TIMEOUT:
+        return 0;
+    default:
+        qErrnoWarning("QWinOverlappedIoNotifier::waitForAnyNotified: WaitForSingleObject failed.");
+        return 0;
     }
+}
 
+/*!
+ * Wait synchronously for the notified signal.
+ *
+ * The function returns true if the notified signal was emitted for
+ * the I/O operation that corresponds to the OVERLAPPED object.
+ */
+bool QWinOverlappedIoNotifier::waitForNotified(int msecs, OVERLAPPED *overlapped)
+{
+    int t = msecs;
+    QElapsedTimer stopWatch;
+    stopWatch.start();
     forever {
-        if (msecs == 0)
-            d->iocp->drainQueue();
-        DWORD result = WaitForSingleObject(d->hSemaphore, msecs == -1 ? INFINITE : DWORD(msecs));
-        if (result == WAIT_OBJECT_0) {
-            ReleaseSemaphore(d->hSemaphore, 1, NULL);
-            if (d->_q_notified() == overlapped)
-                return true;
-            continue;
-        } else if (result == WAIT_TIMEOUT) {
+        OVERLAPPED *triggeredOverlapped = waitForAnyNotified(t);
+        if (!triggeredOverlapped)
             return false;
+        if (triggeredOverlapped == overlapped)
+            return true;
+        if (msecs != -1) {
+            t = msecs - stopWatch.elapsed();
+            if (t < 0)
+                return false;
         }
     }
-
-    qErrnoWarning("QWinOverlappedIoNotifier::waitForNotified: WaitForSingleObject failed.");
-    return false;
 }
 
 /*!
diff --git a/src/corelib/io/qwinoverlappedionotifier_p.h b/src/corelib/io/qwinoverlappedionotifier_p.h
index f90fd2e615..5863e3a468 100644
--- a/src/corelib/io/qwinoverlappedionotifier_p.h
+++ b/src/corelib/io/qwinoverlappedionotifier_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -76,6 +68,7 @@ public:
     Qt::HANDLE handle() const;
 
     void setEnabled(bool enabled);
+    OVERLAPPED *waitForAnyNotified(int msecs);
     bool waitForNotified(int msecs, OVERLAPPED *overlapped);
 
 Q_SIGNALS:
diff --git a/src/corelib/itemmodels/qabstractitemmodel.cpp b/src/corelib/itemmodels/qabstractitemmodel.cpp
index ad5722626e..68ab03976f 100644
--- a/src/corelib/itemmodels/qabstractitemmodel.cpp
+++ b/src/corelib/itemmodels/qabstractitemmodel.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -990,9 +982,9 @@ void QAbstractItemModel::resetInternalData()
 */
 
 /*!
-    \fn void *QModelIndex::internalId() const
+    \fn quintptr QModelIndex::internalId() const
 
-    Returns a \c{qint64} used by the model to associate
+    Returns a \c{quintptr} used by the model to associate
     the index with the internal data structure.
 
     \sa QAbstractItemModel::createIndex()
diff --git a/src/corelib/itemmodels/qabstractitemmodel.h b/src/corelib/itemmodels/qabstractitemmodel.h
index 95b9d271f3..32d88e9d96 100644
--- a/src/corelib/itemmodels/qabstractitemmodel.h
+++ b/src/corelib/itemmodels/qabstractitemmodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qabstractitemmodel_p.h b/src/corelib/itemmodels/qabstractitemmodel_p.h
index 35994acfcf..2d1693b5e4 100644
--- a/src/corelib/itemmodels/qabstractitemmodel_p.h
+++ b/src/corelib/itemmodels/qabstractitemmodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qabstractproxymodel.cpp b/src/corelib/itemmodels/qabstractproxymodel.cpp
index 2f1f4921f7..ce26293183 100644
--- a/src/corelib/itemmodels/qabstractproxymodel.cpp
+++ b/src/corelib/itemmodels/qabstractproxymodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -394,6 +386,30 @@ QMimeData* QAbstractProxyModel::mimeData(const QModelIndexList &indexes) const
 
 /*!
     \reimp
+    \since 5.4
+ */
+bool QAbstractProxyModel::canDropMimeData(const QMimeData *data, Qt::DropAction action,
+                                          int row, int column, const QModelIndex &parent) const
+{
+    Q_D(const QAbstractProxyModel);
+    const QModelIndex source = mapToSource(index(row, column, parent));
+    return d->model->canDropMimeData(data, action, source.row(), source.column(), source.parent());
+}
+
+/*!
+    \reimp
+    \since 5.4
+ */
+bool QAbstractProxyModel::dropMimeData(const QMimeData *data, Qt::DropAction action,
+                                       int row, int column, const QModelIndex &parent)
+{
+    Q_D(QAbstractProxyModel);
+    const QModelIndex source = mapToSource(index(row, column, parent));
+    return d->model->dropMimeData(data, action, source.row(), source.column(), source.parent());
+}
+
+/*!
+    \reimp
  */
 QStringList QAbstractProxyModel::mimeTypes() const
 {
@@ -404,6 +420,15 @@ QStringList QAbstractProxyModel::mimeTypes() const
 /*!
     \reimp
  */
+Qt::DropActions QAbstractProxyModel::supportedDragActions() const
+{
+    Q_D(const QAbstractProxyModel);
+    return d->model->supportedDragActions();
+}
+
+/*!
+    \reimp
+ */
 Qt::DropActions QAbstractProxyModel::supportedDropActions() const
 {
     Q_D(const QAbstractProxyModel);
diff --git a/src/corelib/itemmodels/qabstractproxymodel.h b/src/corelib/itemmodels/qabstractproxymodel.h
index 9b26d6cead..a11fb592ab 100644
--- a/src/corelib/itemmodels/qabstractproxymodel.h
+++ b/src/corelib/itemmodels/qabstractproxymodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -91,7 +83,12 @@ public:
     QModelIndex sibling(int row, int column, const QModelIndex &idx) const;
 
     QMimeData* mimeData(const QModelIndexList &indexes) const;
+    bool canDropMimeData(const QMimeData *data, Qt::DropAction action,
+                         int row, int column, const QModelIndex &parent) const Q_DECL_OVERRIDE;
+    bool dropMimeData(const QMimeData *data, Qt::DropAction action,
+                      int row, int column, const QModelIndex &parent) Q_DECL_OVERRIDE;
     QStringList mimeTypes() const;
+    Qt::DropActions supportedDragActions() const;
     Qt::DropActions supportedDropActions() const;
 
 Q_SIGNALS:
diff --git a/src/corelib/itemmodels/qabstractproxymodel_p.h b/src/corelib/itemmodels/qabstractproxymodel_p.h
index 8de052bff7..9402092fa8 100644
--- a/src/corelib/itemmodels/qabstractproxymodel_p.h
+++ b/src/corelib/itemmodels/qabstractproxymodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qidentityproxymodel.cpp b/src/corelib/itemmodels/qidentityproxymodel.cpp
index c36473a21f..27100c9ff7 100644
--- a/src/corelib/itemmodels/qidentityproxymodel.cpp
+++ b/src/corelib/itemmodels/qidentityproxymodel.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qidentityproxymodel.h b/src/corelib/itemmodels/qidentityproxymodel.h
index 8a416c97bc..7eaa1f4e04 100644
--- a/src/corelib/itemmodels/qidentityproxymodel.h
+++ b/src/corelib/itemmodels/qidentityproxymodel.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qitemselectionmodel.cpp b/src/corelib/itemmodels/qitemselectionmodel.cpp
index 883aa5b982..db78af8cf8 100644
--- a/src/corelib/itemmodels/qitemselectionmodel.cpp
+++ b/src/corelib/itemmodels/qitemselectionmodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -979,6 +971,22 @@ static QItemSelection mergeIndexes(const QVector<QPersistentModelIndex> &indexes
 /*!
     \internal
 
+    Sort predicate function for QItemSelectionModelPrivate::_q_layoutChanged(),
+    sorting by parent first in addition to operator<(). This is to prevent
+    fragmentation of the selection by grouping indexes with the same row, column
+    of different parents next to each other, which may happen when a selection
+    spans sub-trees.
+*/
+static bool qt_PersistentModelIndexLessThan(const QPersistentModelIndex &i1, const QPersistentModelIndex &i2)
+{
+    const QModelIndex parent1 = i1.parent();
+    const QModelIndex parent2 = i2.parent();
+    return parent1 == parent2 ? i1 < i2 : parent1 < parent2;
+}
+
+/*!
+    \internal
+
     Merge the selected indexes into selection ranges again.
 */
 void QItemSelectionModelPrivate::_q_layoutChanged(const QList<QPersistentModelIndex> &, QAbstractItemModel::LayoutChangeHint hint)
@@ -1011,8 +1019,10 @@ void QItemSelectionModelPrivate::_q_layoutChanged(const QList<QPersistentModelIn
 
     if (hint != QAbstractItemModel::VerticalSortHint) {
         // sort the "new" selection, as preparation for merging
-        std::stable_sort(savedPersistentIndexes.begin(), savedPersistentIndexes.end());
-        std::stable_sort(savedPersistentCurrentIndexes.begin(), savedPersistentCurrentIndexes.end());
+        std::stable_sort(savedPersistentIndexes.begin(), savedPersistentIndexes.end(),
+                         qt_PersistentModelIndexLessThan);
+        std::stable_sort(savedPersistentCurrentIndexes.begin(), savedPersistentCurrentIndexes.end(),
+                         qt_PersistentModelIndexLessThan);
 
         // update the selection by merging the individual indexes
         ranges = mergeIndexes(savedPersistentIndexes);
diff --git a/src/corelib/itemmodels/qitemselectionmodel.h b/src/corelib/itemmodels/qitemselectionmodel.h
index 2a1a4b0a2d..27243a2b99 100644
--- a/src/corelib/itemmodels/qitemselectionmodel.h
+++ b/src/corelib/itemmodels/qitemselectionmodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qitemselectionmodel_p.h b/src/corelib/itemmodels/qitemselectionmodel_p.h
index 409dd7682f..3180bfaa8e 100644
--- a/src/corelib/itemmodels/qitemselectionmodel_p.h
+++ b/src/corelib/itemmodels/qitemselectionmodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qsortfilterproxymodel.cpp b/src/corelib/itemmodels/qsortfilterproxymodel.cpp
index 55c4885d92..a95c7dc8b3 100644
--- a/src/corelib/itemmodels/qsortfilterproxymodel.cpp
+++ b/src/corelib/itemmodels/qsortfilterproxymodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qsortfilterproxymodel.h b/src/corelib/itemmodels/qsortfilterproxymodel.h
index a37c892c6c..5f7235876e 100644
--- a/src/corelib/itemmodels/qsortfilterproxymodel.h
+++ b/src/corelib/itemmodels/qsortfilterproxymodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qstringlistmodel.cpp b/src/corelib/itemmodels/qstringlistmodel.cpp
index 31c9137c79..7b3bc8a35c 100644
--- a/src/corelib/itemmodels/qstringlistmodel.cpp
+++ b/src/corelib/itemmodels/qstringlistmodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/itemmodels/qstringlistmodel.h b/src/corelib/itemmodels/qstringlistmodel.h
index 3514b27508..0db2d550af 100644
--- a/src/corelib/itemmodels/qstringlistmodel.h
+++ b/src/corelib/itemmodels/qstringlistmodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/json/qjson.cpp b/src/corelib/json/qjson.cpp
index 8215aeefc0..8fa172eae8 100644
--- a/src/corelib/json/qjson.cpp
+++ b/src/corelib/json/qjson.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/json/qjson_p.h b/src/corelib/json/qjson_p.h
index 7d0162938d..c0befe4615 100644
--- a/src/corelib/json/qjson_p.h
+++ b/src/corelib/json/qjson_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -352,7 +344,7 @@ public:
         return !memcmp(d->utf16, str.d->utf16, d->length*sizeof(ushort));
     }
     inline bool operator<(const String &other) const;
-    inline bool operator >=(const String &other) const { return other < *this; }
+    inline bool operator >=(const String &other) const { return !(*this < other); }
 
     inline QString toString() const {
 #if Q_BYTE_ORDER == Q_LITTLE_ENDIAN
@@ -412,12 +404,29 @@ public:
             val = d->length - str.d->length;
         return val >= 0;
     }
+    inline bool operator<(const String &str) const
+    {
+        const qle_ushort *uc = (qle_ushort *) str.d->utf16;
+        if (!uc || *uc == 0)
+            return false;
 
+        const uchar *c = (uchar *)d->latin1;
+        const uchar *e = c + qMin((int)d->length, (int)str.d->length);
+
+        while (c < e) {
+            if (*c != *uc)
+                break;
+            ++c;
+            ++uc;
+        }
+        return (c == e ? (int)d->length < (int)str.d->length : *c < *uc);
+
+    }
     inline bool operator ==(const String &str) const {
         return (str == *this);
     }
     inline bool operator >=(const String &str) const {
-        return (str < *this);
+        return !(*this < str);
     }
 
     inline QString toString() const {
@@ -454,7 +463,7 @@ inline bool String::operator <(const String &other) const
         a++,b++;
     if (l==-1)
         return (alen < blen);
-    return (ushort)*a - (ushort)*b;
+    return (ushort)*a < (ushort)*b;
 }
 
 inline bool String::operator<(const Latin1String &str) const
diff --git a/src/corelib/json/qjsonarray.cpp b/src/corelib/json/qjsonarray.cpp
index 61bb158ff5..fd407af2cd 100644
--- a/src/corelib/json/qjsonarray.cpp
+++ b/src/corelib/json/qjsonarray.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -138,6 +130,18 @@ QJsonArray::QJsonArray()
 }
 
 /*!
+    \fn QJsonArray::QJsonArray(std::initializer_list<QJsonValue> args)
+    \since 5.4
+    Creates an array initialized from \a args initialization list.
+
+    QJsonArray can be constructed in a way similar to JSON notation,
+    for example:
+    \code
+    QJsonArray array = { 1, 2.2, QString() };
+    \endcode
+ */
+
+/*!
     \internal
  */
 QJsonArray::QJsonArray(QJsonPrivate::Data *data, QJsonPrivate::Array *array)
@@ -149,6 +153,19 @@ QJsonArray::QJsonArray(QJsonPrivate::Data *data, QJsonPrivate::Array *array)
 }
 
 /*!
+    This method replaces part of QJsonArray(std::initializer_list<QJsonValue> args) .
+    The constructor needs to be inline, but we do not want to leak implementation details
+    of this class.
+    \note this method is called for an uninitialized object
+    \internal
+ */
+void QJsonArray::initialize()
+{
+    d = 0;
+    a = 0;
+}
+
+/*!
     Deletes the array.
  */
 QJsonArray::~QJsonArray()
@@ -721,6 +738,11 @@ bool QJsonArray::operator!=(const QJsonArray &other) const
     from which you got the reference.
 */
 
+/*! \fn QJsonValueRef *QJsonArray::iterator::operator->() const
+
+    Returns a pointer to a modifiable reference to the current item.
+*/
+
 /*! \fn QJsonValueRef QJsonArray::iterator::operator[](int j) const
 
     Returns a modifiable reference to the item at offset \a j from the
@@ -946,6 +968,11 @@ bool QJsonArray::operator!=(const QJsonArray &other) const
     Returns the current item.
 */
 
+/*! \fn QJsonValue *QJsonArray::const_iterator::operator->() const
+
+    Returns a pointer to the current item.
+*/
+
 /*! \fn QJsonValue QJsonArray::const_iterator::operator[](int j) const
 
     Returns the item at offset \a j from the item pointed to by this iterator (the item at
diff --git a/src/corelib/json/qjsonarray.h b/src/corelib/json/qjsonarray.h
index 84c162f0a0..87d14a7703 100644
--- a/src/corelib/json/qjsonarray.h
+++ b/src/corelib/json/qjsonarray.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,9 @@
 
 #include <QtCore/qjsonvalue.h>
 #include <QtCore/qiterator.h>
+#if defined(Q_COMPILER_INITIALIZER_LISTS)
+#include <initializer_list>
+#endif
 
 QT_BEGIN_NAMESPACE
 
@@ -56,6 +51,16 @@ class Q_CORE_EXPORT QJsonArray
 {
 public:
     QJsonArray();
+
+#if defined(Q_COMPILER_INITIALIZER_LISTS) || defined(Q_QDOC)
+    QJsonArray(std::initializer_list<QJsonValue> args)
+    {
+        initialize();
+        for (std::initializer_list<QJsonValue>::const_iterator i = args.begin(); i != args.end(); ++i)
+            append(*i);
+    }
+#endif
+
     ~QJsonArray();
 
     QJsonArray(const QJsonArray &other);
@@ -99,14 +104,17 @@ public:
         typedef std::random_access_iterator_tag  iterator_category;
         typedef int difference_type;
         typedef QJsonValue value_type;
-        //typedef T *pointer;
         typedef QJsonValueRef reference;
 
         inline iterator() : a(0), i(0) { }
         explicit inline iterator(QJsonArray *array, int index) : a(array), i(index) { }
 
         inline QJsonValueRef operator*() const { return QJsonValueRef(a, i); }
-        //inline T *operator->() const { return &concrete(i)->value; }
+#ifdef Q_QDOC
+        inline QJsonValueRef* operator->() const;
+#else
+        inline QJsonValueRefPtr operator->() const { return QJsonValueRefPtr(a, i); }
+#endif
         inline QJsonValueRef operator[](int j) const { return QJsonValueRef(a, i + j); }
 
         inline bool operator==(const iterator &o) const { return i == o.i; }
@@ -140,7 +148,6 @@ public:
         typedef std::random_access_iterator_tag  iterator_category;
         typedef qptrdiff difference_type;
         typedef QJsonValue value_type;
-        //typedef const T *pointer;
         typedef QJsonValue reference;
 
         inline const_iterator() : a(0), i(0) { }
@@ -149,7 +156,11 @@ public:
         inline const_iterator(const iterator &o) : a(o.a), i(o.i) {}
 
         inline QJsonValue operator*() const { return a->at(i); }
-        //inline T *operator->() const { return &concrete(i)->value; }
+#ifdef Q_QDOC
+        inline QJsonValue* operator->() const;
+#else
+        inline QJsonValuePtr operator->() const { return QJsonValuePtr(a->at(i)); }
+#endif
         inline QJsonValue operator[](int j) const { return a->at(i+j); }
         inline bool operator==(const const_iterator &o) const { return i == o.i; }
         inline bool operator!=(const const_iterator &o) const { return i != o.i; }
@@ -212,6 +223,7 @@ private:
     friend Q_CORE_EXPORT QDebug operator<<(QDebug, const QJsonArray &);
 
     QJsonArray(QJsonPrivate::Data *data, QJsonPrivate::Array *array);
+    void initialize();
     void compact();
     void detach(uint reserve = 0);
 
diff --git a/src/corelib/json/qjsondocument.cpp b/src/corelib/json/qjsondocument.cpp
index 90ce8c63a5..6e64df42ad 100644
--- a/src/corelib/json/qjsondocument.cpp
+++ b/src/corelib/json/qjsondocument.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -331,7 +323,7 @@ QByteArray QJsonDocument::toJson() const
 
     \value Compact Defines a compact output as follows:
         \code
-        {"Array": [true,999,"string"],"Key": "Value","null": null}
+        {"Array":[true,999,"string"],"Key":"Value","null":null}
         \endcode
   */
 
diff --git a/src/corelib/json/qjsondocument.h b/src/corelib/json/qjsondocument.h
index ea42d76b20..4012e296fb 100644
--- a/src/corelib/json/qjsondocument.h
+++ b/src/corelib/json/qjsondocument.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,7 +60,8 @@ struct Q_CORE_EXPORT QJsonParseError
         UnterminatedString,
         MissingObject,
         DeepNesting,
-        DocumentTooLarge
+        DocumentTooLarge,
+        GarbageAtEnd
     };
 
     QString    errorString() const;
diff --git a/src/corelib/json/qjsonobject.cpp b/src/corelib/json/qjsonobject.cpp
index 27e51cf4ac..bc74092f59 100644
--- a/src/corelib/json/qjsonobject.cpp
+++ b/src/corelib/json/qjsonobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -116,6 +108,20 @@ QJsonObject::QJsonObject()
 }
 
 /*!
+    \fn QJsonObject::QJsonObject(std::initializer_list<QPair<QString, QJsonValue> > args)
+    \since 5.4
+    Constructs a QJsonObject instance initialized from \a args initialization list.
+    For example:
+    \code
+    QJsonObject object
+    {
+        {"property1", 1},
+        {"property2", 2}
+    };
+    \endcode
+*/
+
+/*!
     \internal
  */
 QJsonObject::QJsonObject(QJsonPrivate::Data *data, QJsonPrivate::Object *object)
@@ -126,6 +132,19 @@ QJsonObject::QJsonObject(QJsonPrivate::Data *data, QJsonPrivate::Object *object)
     d->ref.ref();
 }
 
+/*!
+    This method replaces part of the QJsonObject(std::initializer_list<QPair<QString, QJsonValue>> args) body.
+    The constructor needs to be inline, but we do not want to leak implementation details
+    of this class.
+    \note this method is called for an uninitialized object
+    \internal
+ */
+
+void QJsonObject::initialize()
+{
+    d = 0;
+    o = 0;
+}
 
 /*!
     Destroys the object.
@@ -254,7 +273,7 @@ bool QJsonObject::isEmpty() const
 QJsonValue QJsonObject::value(const QString &key) const
 {
     if (!d)
-        return QJsonValue();
+        return QJsonValue(QJsonValue::Undefined);
 
     bool keyExists;
     int i = o->indexOf(key, &keyExists);
@@ -687,6 +706,11 @@ QJsonObject::const_iterator QJsonObject::constFind(const QString &key) const
     \sa key()
 */
 
+/*! \fn QJsonValueRef *QJsonObject::iterator::operator->() const
+
+    Returns a pointer to a modifiable reference to the current item.
+*/
+
 /*!
     \fn bool QJsonObject::iterator::operator==(const iterator &other) const
     \fn bool QJsonObject::iterator::operator==(const const_iterator &other) const
@@ -870,6 +894,11 @@ QJsonObject::const_iterator QJsonObject::constFind(const QString &key) const
     \sa key()
 */
 
+/*! \fn QJsonValue *QJsonObject::const_iterator::operator->() const
+
+    Returns a pointer to the current item.
+*/
+
 /*! \fn bool QJsonObject::const_iterator::operator==(const const_iterator &other) const
     \fn bool QJsonObject::const_iterator::operator==(const iterator &other) const
 
diff --git a/src/corelib/json/qjsonobject.h b/src/corelib/json/qjsonobject.h
index ad3184b1f2..9abdb047ed 100644
--- a/src/corelib/json/qjsonobject.h
+++ b/src/corelib/json/qjsonobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,10 @@
 
 #include <QtCore/qjsonvalue.h>
 #include <QtCore/qiterator.h>
+#ifdef Q_COMPILER_INITIALIZER_LISTS
+#include <QtCore/qpair.h>
+#include <initializer_list>
+#endif
 
 QT_BEGIN_NAMESPACE
 
@@ -55,6 +51,16 @@ class Q_CORE_EXPORT QJsonObject
 {
 public:
     QJsonObject();
+
+#if defined(Q_COMPILER_INITIALIZER_LISTS) || defined(Q_QDOC)
+    QJsonObject(std::initializer_list<QPair<QString, QJsonValue> > args)
+    {
+        initialize();
+        for (std::initializer_list<QPair<QString, QJsonValue> >::const_iterator i = args.begin(); i != args.end(); ++i)
+            insert(i->first, i->second);
+    }
+#endif
+
     ~QJsonObject();
 
     QJsonObject(const QJsonObject &other);
@@ -93,7 +99,6 @@ public:
         typedef std::bidirectional_iterator_tag iterator_category;
         typedef int difference_type;
         typedef QJsonValue value_type;
-//        typedef T *pointer;
         typedef QJsonValueRef reference;
 
         Q_DECL_CONSTEXPR inline iterator() : o(0), i(0) {}
@@ -102,7 +107,11 @@ public:
         inline QString key() const { return o->keyAt(i); }
         inline QJsonValueRef value() const { return QJsonValueRef(o, i); }
         inline QJsonValueRef operator*() const { return QJsonValueRef(o, i); }
-        //inline T *operator->() const { return &concrete(i)->value; }
+#ifdef Q_QDOC
+        inline QJsonValueRef* operator->() const;
+#else
+        inline QJsonValueRefPtr operator->() const { return QJsonValueRefPtr(o, i); }
+#endif
         inline bool operator==(const iterator &other) const { return i == other.i; }
         inline bool operator!=(const iterator &other) const { return i != other.i; }
 
@@ -143,7 +152,11 @@ public:
         inline QString key() const { return o->keyAt(i); }
         inline QJsonValue value() const { return o->valueAt(i); }
         inline QJsonValue operator*() const { return o->valueAt(i); }
-        //inline const T *operator->() const { return &concrete(i)->value; }
+#ifdef Q_QDOC
+        inline QJsonValue* operator->() const;
+#else
+        inline QJsonValuePtr operator->() const { return QJsonValuePtr(o->valueAt(i)); }
+#endif
         inline bool operator==(const const_iterator &other) const { return i == other.i; }
         inline bool operator!=(const const_iterator &other) const { return i != other.i; }
 
@@ -195,6 +208,7 @@ private:
     friend Q_CORE_EXPORT QDebug operator<<(QDebug, const QJsonObject &);
 
     QJsonObject(QJsonPrivate::Data *data, QJsonPrivate::Object *object);
+    void initialize();
     void detach(uint reserve = 0);
     void compact();
 
diff --git a/src/corelib/json/qjsonparser.cpp b/src/corelib/json/qjsonparser.cpp
index 0c61718843..c593b029dc 100644
--- a/src/corelib/json/qjsonparser.cpp
+++ b/src/corelib/json/qjsonparser.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -79,6 +71,7 @@ QT_BEGIN_NAMESPACE
 #define JSONERR_MISS_OBJ    QT_TRANSLATE_NOOP("QJsonParseError", "object is missing after a comma")
 #define JSONERR_DEEP_NEST   QT_TRANSLATE_NOOP("QJsonParseError", "too deeply nested document")
 #define JSONERR_DOC_LARGE   QT_TRANSLATE_NOOP("QJsonParseError", "too large document")
+#define JSONERR_GARBAGEEND  QT_TRANSLATE_NOOP("QJsonParseError", "garbage at the end of the document")
 
 /*!
     \class QJsonParseError
@@ -111,6 +104,8 @@ QT_BEGIN_NAMESPACE
     \value MissingObject            An object was expected but couldn't be found
     \value DeepNesting              The JSON document is too deeply nested for the parser to parse it
     \value DocumentTooLarge         The JSON document is too large for the parser to parse it
+    \value GarbageAtEnd             The parsed document contains additional garbage characters at the end
+
 */
 
 /*!
@@ -182,6 +177,9 @@ QString QJsonParseError::errorString() const
     case DocumentTooLarge:
         sz = JSONERR_DOC_LARGE;
         break;
+    case GarbageAtEnd:
+        sz = JSONERR_GARBAGEEND;
+        break;
     }
 #ifndef QT_BOOTSTRAPPED
     return QCoreApplication::translate("QJsonParseError", sz);
@@ -323,6 +321,12 @@ QJsonDocument Parser::parse(QJsonParseError *error)
         goto error;
     }
 
+    eatSpace();
+    if (json < end) {
+        lastError = QJsonParseError::GarbageAtEnd;
+        goto error;
+    }
+
     END;
     {
         if (error) {
diff --git a/src/corelib/json/qjsonparser_p.h b/src/corelib/json/qjsonparser_p.h
index 88920f6b64..917c48af4f 100644
--- a/src/corelib/json/qjsonparser_p.h
+++ b/src/corelib/json/qjsonparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/json/qjsonvalue.cpp b/src/corelib/json/qjsonvalue.cpp
index 4838a78217..ac4fcb89c1 100644
--- a/src/corelib/json/qjsonvalue.cpp
+++ b/src/corelib/json/qjsonvalue.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -606,15 +598,19 @@ bool QJsonValue::operator==(const QJsonValue &other) const
     case Array:
         if (base == other.base)
             return true;
-        if (!base || !other.base)
-            return false;
+        if (!base)
+            return !other.base->length;
+        if (!other.base)
+            return !base->length;
         return QJsonArray(d, static_cast<QJsonPrivate::Array *>(base))
                 == QJsonArray(other.d, static_cast<QJsonPrivate::Array *>(other.base));
     case Object:
         if (base == other.base)
             return true;
-        if (!base || !other.base)
-            return false;
+        if (!base)
+            return !other.base->length;
+        if (!other.base)
+            return !base->length;
         return QJsonObject(d, static_cast<QJsonPrivate::Object *>(base))
                 == QJsonObject(other.d, static_cast<QJsonPrivate::Object *>(other.base));
     }
diff --git a/src/corelib/json/qjsonvalue.h b/src/corelib/json/qjsonvalue.h
index fe028990c0..53e5ec5124 100644
--- a/src/corelib/json/qjsonvalue.h
+++ b/src/corelib/json/qjsonvalue.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -170,6 +162,12 @@ public:
     QJsonArray toArray() const;
     QJsonObject toObject() const;
 
+    // ### Qt 6: Add default values
+    inline bool toBool(bool defaultValue) const { return toValue().toBool(defaultValue); }
+    inline int toInt(int defaultValue) const { return toValue().toInt(defaultValue); }
+    inline double toDouble(double defaultValue) const { return toValue().toDouble(defaultValue); }
+    inline QString toString(const QString &defaultValue) const { return toValue().toString(defaultValue); }
+
     inline bool operator==(const QJsonValue &other) const { return toValue() == other; }
     inline bool operator!=(const QJsonValue &other) const { return toValue() != other; }
 
@@ -184,6 +182,33 @@ private:
     uint index : 31;
 };
 
+#ifndef Q_QDOC
+// ### Qt 6: Get rid of these fake pointer classes
+class QJsonValuePtr
+{
+    QJsonValue value;
+public:
+    explicit QJsonValuePtr(const QJsonValue& val)
+        : value(val) {}
+
+    QJsonValue& operator*() { return value; }
+    QJsonValue* operator->() { return &value; }
+};
+
+class QJsonValueRefPtr
+{
+    QJsonValueRef valueRef;
+public:
+    QJsonValueRefPtr(QJsonArray *array, int idx)
+        : valueRef(array, idx) {}
+    QJsonValueRefPtr(QJsonObject *object, int idx)
+        : valueRef(object, idx)  {}
+
+    QJsonValueRef& operator*() { return valueRef; }
+    QJsonValueRef* operator->() { return &valueRef; }
+};
+#endif
+
 #if !defined(QT_NO_DEBUG_STREAM) && !defined(QT_JSON_READONLY)
 Q_CORE_EXPORT QDebug operator<<(QDebug, const QJsonValue &);
 #endif
diff --git a/src/corelib/json/qjsonwriter.cpp b/src/corelib/json/qjsonwriter.cpp
index 17c22429a5..2c7086f5ad 100644
--- a/src/corelib/json/qjsonwriter.cpp
+++ b/src/corelib/json/qjsonwriter.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/json/qjsonwriter_p.h b/src/corelib/json/qjsonwriter_p.h
index bee12cdc4e..d9f95bdd27 100644
--- a/src/corelib/json/qjsonwriter_p.h
+++ b/src/corelib/json/qjsonwriter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qabstracteventdispatcher.cpp b/src/corelib/kernel/qabstracteventdispatcher.cpp
index 90e3a1e9e1..b365714365 100644
--- a/src/corelib/kernel/qabstracteventdispatcher.cpp
+++ b/src/corelib/kernel/qabstracteventdispatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -183,8 +175,8 @@ QAbstractEventDispatcher *QAbstractEventDispatcher::instance(QThread *thread)
     otherwise returns \c false.
 
     This function is especially useful if you have a long running
-    operation and want to show its progress without allowing user
-    input; i.e. by using the QEventLoop::ExcludeUserInputEvents flag.
+    operation, and want to show its progress without allowing user
+    input by using the QEventLoop::ExcludeUserInputEvents flag.
 
     If the QEventLoop::WaitForMoreEvents flag is set in \a flags, the
     behavior of this function is as follows:
@@ -317,7 +309,7 @@ int QAbstractEventDispatcher::registerTimer(int interval, Qt::TimerType timerTyp
 /*!
     \fn void QAbstractEventDispatcher::interrupt()
 
-    Interrupts event dispatching; i.e. the event dispatcher will
+    Interrupts event dispatching.  The event dispatcher will
     return from processEvents() as soon as possible.
 */
 
@@ -379,11 +371,11 @@ void QAbstractEventDispatcher::closingDown()
     Installs an event filter \a filterObj for all native event filters
     received by the application.
 
-    The event filter \a filterObj receives events via its nativeEventFilter()
+    The event filter \a filterObj receives events via its \l {QAbstractNativeEventFilter::}{nativeEventFilter()}
     function, which is called for all events received by all threads.
 
-    The nativeEventFilter() function should return true if the event should
-    be filtered, (i.e. stopped). It should return false to allow
+    The  \l {QAbstractNativeEventFilter::}{nativeEventFilter()} function should return true
+    if the event should be filtered, (in this case, stopped). It should return false to allow
     normal Qt processing to continue: the native event can then be translated
     into a QEvent and handled by the standard Qt \l{QEvent} {event} filtering,
     e.g. QObject::installEventFilter().
@@ -392,7 +384,7 @@ void QAbstractEventDispatcher::closingDown()
     is activated first.
 
     \note The filter function set here receives native messages,
-    i.e. MSG or XEvent structs.
+    that is, MSG or XEvent structs.
 
     For maximum portability, you should always try to use QEvents
     and QObject::installEventFilter() whenever possible.
@@ -418,8 +410,8 @@ void QAbstractEventDispatcher::installNativeEventFilter(QAbstractNativeEventFilt
     All event filters for this object are automatically removed when
     this object is destroyed.
 
-    It is always safe to remove an event filter, even during event
-    filter activation (i.e. from the nativeEventFilter() function).
+    It is always safe to remove an event filter, even during event filter
+    filter activation (that is, even from within the \l {QAbstractNativeEventFilter::}{nativeEventFilter()} function).
 
     \sa installNativeEventFilter(), QAbstractNativeEventFilter
     \since 5.0
diff --git a/src/corelib/kernel/qabstracteventdispatcher.h b/src/corelib/kernel/qabstracteventdispatcher.h
index d95ebe0ca2..e45df9e2de 100644
--- a/src/corelib/kernel/qabstracteventdispatcher.h
+++ b/src/corelib/kernel/qabstracteventdispatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qabstracteventdispatcher_p.h b/src/corelib/kernel/qabstracteventdispatcher_p.h
index 77d55df4e0..b91fefe959 100644
--- a/src/corelib/kernel/qabstracteventdispatcher_p.h
+++ b/src/corelib/kernel/qabstracteventdispatcher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qabstractnativeeventfilter.cpp b/src/corelib/kernel/qabstractnativeeventfilter.cpp
index b38e225f0d..91467652e1 100644
--- a/src/corelib/kernel/qabstractnativeeventfilter.cpp
+++ b/src/corelib/kernel/qabstractnativeeventfilter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qabstractnativeeventfilter.h b/src/corelib/kernel/qabstractnativeeventfilter.h
index 9d1db2c19b..dd90d2411b 100644
--- a/src/corelib/kernel/qabstractnativeeventfilter.h
+++ b/src/corelib/kernel/qabstractnativeeventfilter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qbasictimer.cpp b/src/corelib/kernel/qbasictimer.cpp
index f3366489d5..111a27fb3b 100644
--- a/src/corelib/kernel/qbasictimer.cpp
+++ b/src/corelib/kernel/qbasictimer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -118,13 +110,19 @@ QT_BEGIN_NAMESPACE
 void QBasicTimer::start(int msec, QObject *obj)
 {
     QAbstractEventDispatcher *eventDispatcher = QAbstractEventDispatcher::instance();
-    if (!eventDispatcher) {
+    if (Q_UNLIKELY(!eventDispatcher)) {
         qWarning("QBasicTimer::start: QBasicTimer can only be used with threads started with QThread");
         return;
     }
+    if (Q_UNLIKELY(obj && obj->thread() != eventDispatcher->thread())) {
+        qWarning("QBasicTimer::start: Timers cannot be started from another thread");
+        return;
+    }
     if (id) {
-        eventDispatcher->unregisterTimer(id);
-        QAbstractEventDispatcherPrivate::releaseTimerId(id);
+        if (Q_LIKELY(eventDispatcher->unregisterTimer(id)))
+            QAbstractEventDispatcherPrivate::releaseTimerId(id);
+        else
+            qWarning("QBasicTimer::start: Stopping previous timer failed. Possibly trying to stop from a different thread");
     }
     id = 0;
     if (obj)
@@ -145,13 +143,23 @@ void QBasicTimer::start(int msec, QObject *obj)
 void QBasicTimer::start(int msec, Qt::TimerType timerType, QObject *obj)
 {
     QAbstractEventDispatcher *eventDispatcher = QAbstractEventDispatcher::instance();
-    if (!eventDispatcher) {
+    if (Q_UNLIKELY(msec < 0)) {
+        qWarning("QBasicTimer::start: Timers cannot have negative timeouts");
+        return;
+    }
+    if (Q_UNLIKELY(!eventDispatcher)) {
         qWarning("QBasicTimer::start: QBasicTimer can only be used with threads started with QThread");
         return;
     }
+    if (Q_UNLIKELY(obj && obj->thread() != eventDispatcher->thread())) {
+        qWarning("QBasicTimer::start: Timers cannot be started from another thread");
+        return;
+    }
     if (id) {
-        eventDispatcher->unregisterTimer(id);
-        QAbstractEventDispatcherPrivate::releaseTimerId(id);
+        if (Q_LIKELY(eventDispatcher->unregisterTimer(id)))
+            QAbstractEventDispatcherPrivate::releaseTimerId(id);
+        else
+            qWarning("QBasicTimer::start: Stopping previous timer failed. Possibly trying to stop from a different thread");
     }
     id = 0;
     if (obj)
@@ -167,9 +175,13 @@ void QBasicTimer::stop()
 {
     if (id) {
         QAbstractEventDispatcher *eventDispatcher = QAbstractEventDispatcher::instance();
-        if (eventDispatcher)
-            eventDispatcher->unregisterTimer(id);
-        QAbstractEventDispatcherPrivate::releaseTimerId(id);
+        if (eventDispatcher) {
+            if (Q_UNLIKELY(!eventDispatcher->unregisterTimer(id))) {
+                qWarning("QBasicTimer::stop: Failed. Possibly trying to stop from a different thread");
+                return;
+            }
+            QAbstractEventDispatcherPrivate::releaseTimerId(id);
+        }
     }
     id = 0;
 }
diff --git a/src/corelib/kernel/qbasictimer.h b/src/corelib/kernel/qbasictimer.h
index 432e4d58c8..881be8c8d9 100644
--- a/src/corelib/kernel/qbasictimer.h
+++ b/src/corelib/kernel/qbasictimer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcore_mac.cpp b/src/corelib/kernel/qcore_mac.cpp
index e4e8b7e5c3..49edca122d 100644
--- a/src/corelib/kernel/qcore_mac.cpp
+++ b/src/corelib/kernel/qcore_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcore_mac_p.h b/src/corelib/kernel/qcore_mac_p.h
index e92a2d2978..842e2ef9f1 100644
--- a/src/corelib/kernel/qcore_mac_p.h
+++ b/src/corelib/kernel/qcore_mac_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcore_unix.cpp b/src/corelib/kernel/qcore_unix.cpp
index 568453ec07..e115ea716f 100644
--- a/src/corelib/kernel/qcore_unix.cpp
+++ b/src/corelib/kernel/qcore_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcore_unix_p.h b/src/corelib/kernel/qcore_unix_p.h
index df78ef6692..82c73bd2ba 100644
--- a/src/corelib/kernel/qcore_unix_p.h
+++ b/src/corelib/kernel/qcore_unix_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcoreapplication.cpp b/src/corelib/kernel/qcoreapplication.cpp
index 82c157ee7f..45647f2056 100644
--- a/src/corelib/kernel/qcoreapplication.cpp
+++ b/src/corelib/kernel/qcoreapplication.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -71,6 +63,7 @@
 #include <private/qfactoryloader_p.h>
 #include <private/qfunctions_p.h>
 #include <private/qlocale_p.h>
+#include <private/qhooks_p.h>
 
 #ifndef QT_NO_QOBJECT
 #if defined(Q_OS_UNIX)
@@ -564,8 +557,8 @@ void QCoreApplicationPrivate::initLocale()
 /*!
     \class QCoreApplication
     \inmodule QtCore
-    \brief The QCoreApplication class provides an event loop for console Qt
-    applications.
+    \brief The QCoreApplication class provides an event loop for Qt
+    applications without UI.
 
     This class is used by non-GUI applications to provide their event
     loop. For non-GUI application that uses Qt, there should be exactly
@@ -765,6 +758,10 @@ void QCoreApplication::init()
 
     qt_call_pre_routines();
     qt_startup_hook();
+#ifndef QT_BOOTSTRAPPED
+    if (Q_UNLIKELY(qtHookData[QHooks::Startup]))
+        reinterpret_cast<QHooks::StartupCallback>(qtHookData[QHooks::Startup])();
+#endif
 
 #ifndef QT_NO_QOBJECT
     QCoreApplicationPrivate::is_app_running = true; // No longer starting up.
@@ -951,8 +948,8 @@ bool QCoreApplication::notifyInternal(QObject *receiver, QEvent *event)
   reimplementing this virtual function is just one of them. All five
   approaches are listed below:
   \list 1
-  \li Reimplementing paintEvent(), mousePressEvent() and so
-  on. This is the commonest, easiest and least powerful way.
+  \li Reimplementing \l {QWidget::}{paintEvent()}, \l {QWidget::}{mousePressEvent()} and so
+  on. This is the commonest, easiest, and least powerful way.
 
   \li Reimplementing this function. This is very powerful, providing
   complete control; but only one subclass can be active at a time.
@@ -1149,7 +1146,7 @@ void QCoreApplication::processEvents(QEventLoop::ProcessEventsFlags flags, int m
     main event loop receives events from the window system and
     dispatches these to the application widgets.
 
-    To make your application perform idle processing (i.e. executing a
+    To make your application perform idle processing (by executing a
     special function whenever there are no pending events), use a
     QTimer with 0 timeout. More advanced idle processing schemes can
     be achieved using processEvents().
@@ -1157,11 +1154,11 @@ void QCoreApplication::processEvents(QEventLoop::ProcessEventsFlags flags, int m
     We recommend that you connect clean-up code to the
     \l{QCoreApplication::}{aboutToQuit()} signal, instead of putting it in
     your application's \c{main()} function because on some platforms the
-    QCoreApplication::exec() call may not return. For example, on Windows
+    exec() call may not return. For example, on Windows
     when the user logs off, the system terminates the process after Qt
     closes all top-level windows. Hence, there is no guarantee that the
     application will have time to exit its event loop and execute code at
-    the end of the \c{main()} function after the QCoreApplication::exec()
+    the end of the \c{main()} function after the exec()
     call.
 
     \sa quit(), exit(), processEvents(), QApplication::exec()
@@ -2210,7 +2207,7 @@ QStringList QCoreApplication::arguments()
     using the empty constructor. This saves having to repeat this
     information each time a QSettings object is created.
 
-    On Mac, QSettings uses organizationDomain() as the organization
+    On Mac, QSettings uses \l {QCoreApplication::}{organizationDomain()} as the organization
     if it's not an empty string; otherwise it uses
     organizationName(). On all other platforms, QSettings uses
     organizationName() as the organization.
@@ -2513,10 +2510,10 @@ void QCoreApplication::removeLibraryPath(const QString &path)
     Installs an event filter \a filterObj for all native events
     received by the application in the main thread.
 
-    The event filter \a filterObj receives events via its nativeEventFilter()
+    The event filter \a filterObj receives events via its \l {QAbstractNativeEventFilter::}{nativeEventFilter()}
     function, which is called for all native events received in the main thread.
 
-    The nativeEventFilter() function should return true if the event should
+    The QAbstractNativeEventFilter::nativeEventFilter() function should return true if the event should
     be filtered, (i.e. stopped). It should return false to allow
     normal Qt processing to continue: the native event can then be translated
     into a QEvent and handled by the standard Qt \l{QEvent} {event} filtering,
@@ -2660,13 +2657,12 @@ void QCoreApplication::setEventDispatcher(QAbstractEventDispatcher *eventDispatc
 
     \snippet code/src_corelib_kernel_qcoreapplication.cpp 4
 
-    Note that for an application- or module-wide cleanup,
-    qAddPostRoutine() is often not suitable. For example, if the
-    program is split into dynamically loaded modules, the relevant
-    module may be unloaded long before the QCoreApplication destructor is
-    called. In such cases, if using qAddPostRoutine() is still desirable,
-    qRemovePostRoutine() can be used to prevent a routine from being
-    called by the QCoreApplication destructor. For example, if that
+    Note that for an application- or module-wide cleanup, qaddPostRoutine()
+    is often not suitable. For example, if the program is split into dynamically
+    loaded modules, the relevant module may be unloaded long before the
+    QCoreApplication destructor is called. In such cases, if using qaddPostRoutine()
+    is still desirable, qRemovePostRoutine() can be used to prevent a routine
+    from being called by the QCoreApplication destructor. For example, if that
     routine was called before the module was unloaded.
 
     For modules and libraries, using a reference-counted
diff --git a/src/corelib/kernel/qcoreapplication.h b/src/corelib/kernel/qcoreapplication.h
index d8c52fbf1d..ff1dd5c43a 100644
--- a/src/corelib/kernel/qcoreapplication.h
+++ b/src/corelib/kernel/qcoreapplication.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -219,7 +211,6 @@ private:
     friend class QApplicationPrivate;
     friend class QGuiApplication;
     friend class QGuiApplicationPrivate;
-    friend class QETWidget;
     friend class QWidget;
     friend class QWidgetWindow;
     friend class QWidgetPrivate;
diff --git a/src/corelib/kernel/qcoreapplication_mac.cpp b/src/corelib/kernel/qcoreapplication_mac.cpp
index 8466269487..fe81a876c3 100644
--- a/src/corelib/kernel/qcoreapplication_mac.cpp
+++ b/src/corelib/kernel/qcoreapplication_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcoreapplication_p.h b/src/corelib/kernel/qcoreapplication_p.h
index d784267a65..a3a0eaa68c 100644
--- a/src/corelib/kernel/qcoreapplication_p.h
+++ b/src/corelib/kernel/qcoreapplication_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -96,6 +88,7 @@ public:
     bool sendThroughApplicationEventFilters(QObject *, QEvent *);
     bool sendThroughObjectEventFilters(QObject *, QEvent *);
     bool notify_helper(QObject *, QEvent *);
+    static inline void setEventSpontaneous(QEvent *e, bool spontaneous) { e->spont = spontaneous; }
 
     virtual void createEventDispatcher();
     virtual void eventDispatcherReady();
diff --git a/src/corelib/kernel/qcoreapplication_win.cpp b/src/corelib/kernel/qcoreapplication_win.cpp
index 65ca6b0dcb..424ee3fdea 100644
--- a/src/corelib/kernel/qcoreapplication_win.cpp
+++ b/src/corelib/kernel/qcoreapplication_win.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -145,14 +137,30 @@ QString QCoreApplicationPrivate::appName() const
   qWinMain() - Initializes Windows. Called from WinMain() in qtmain_win.cpp
  *****************************************************************************/
 
-#if defined(Q_OS_WINCE)
-Q_CORE_EXPORT void __cdecl qWinMain(HINSTANCE instance, HINSTANCE prevInstance, LPSTR cmdParam,
-               int cmdShow, int &argc, QVector<char *> &argv)
-#else
+#if !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
+
+// ### Qt6: FIXME: Remove this function. It is only there since for binary
+// compatibility for applications built with Qt 5.3 using qtmain.lib which calls it.
+// In Qt 5.4, qtmain.lib was changed to use CommandLineToArgvW() without calling into Qt5Core.
 Q_CORE_EXPORT
 void qWinMain(HINSTANCE instance, HINSTANCE prevInstance, LPSTR cmdParam,
+              int cmdShow, int &argc, QVector<char *> &argv)
+{
+    Q_UNUSED(instance)
+    Q_UNUSED(prevInstance)
+    Q_UNUSED(cmdShow)
+
+    const QStringList wArgv = qWinCmdArgs(QString::fromLocal8Bit(cmdParam));
+    argv.clear();
+    argc = wArgv.size();
+    foreach (const QString &wArg, wArgv)
+        argv.append(_strdup(wArg.toLocal8Bit().constData()));
+}
+
+#elif defined(Q_OS_WINCE)
+
+Q_CORE_EXPORT void __cdecl qWinMain(HINSTANCE instance, HINSTANCE prevInstance, LPSTR cmdParam,
                int cmdShow, int &argc, QVector<char *> &argv)
-#endif
 {
     static bool already_called = false;
 
@@ -172,6 +180,8 @@ void qWinMain(HINSTANCE instance, HINSTANCE prevInstance, LPSTR cmdParam,
     Q_UNUSED(prevInstance);
 }
 
+#endif // Q_OS_WINCE
+
 #ifndef QT_NO_QOBJECT
 
 void QCoreApplicationPrivate::removePostedTimerEvent(QObject *object, int timerId)
diff --git a/src/corelib/kernel/qcorecmdlineargs_p.h b/src/corelib/kernel/qcorecmdlineargs_p.h
index 93c80205ab..1870b35c0d 100644
--- a/src/corelib/kernel/qcorecmdlineargs_p.h
+++ b/src/corelib/kernel/qcorecmdlineargs_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,14 +48,34 @@
 #include "QtCore/qstring.h"
 #include "QtCore/qstringlist.h"
 
+#if defined(Q_OS_WIN)
+#  ifdef Q_OS_WIN32
+#    include <qt_windows.h> // first to suppress min, max macros.
+#    include <shlobj.h>
+#  else
+#    include "QtCore/qvector.h"
+#    include <qt_windows.h>
+#  endif
+
 QT_BEGIN_NAMESPACE
 
-#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
+#if defined(Q_OS_WIN32)
+
+static inline QStringList qWinCmdArgs(const QString &cmdLine)
+{
+    QStringList result;
+    int size;
+    if (wchar_t **argv = CommandLineToArgvW((const wchar_t *)cmdLine.utf16(), &size)) {
+        result.reserve(size);
+        wchar_t **argvEnd = argv + size;
+        for (wchar_t **a = argv; a < argvEnd; ++a)
+            result.append(QString::fromWCharArray(*a));
+        LocalFree(argv);
+    }
+    return result;
+}
 
-QT_BEGIN_INCLUDE_NAMESPACE
-#  include "QtCore/qvector.h"
-#  include <qt_windows.h>
-QT_END_INCLUDE_NAMESPACE
+#elif defined(Q_OS_WINCE) // Q_OS_WIN32
 
 // template implementation of the parsing algorithm
 // this is used from qcoreapplication_win.cpp and the tools (rcc, uic...)
@@ -149,7 +161,7 @@ static inline QStringList qCmdLineArgs(int argc, char *argv[])
     return qWinCmdArgs(cmdLine);
 }
 
-#else  // Q_OS_WIN && !Q_OS_WINRT
+#elif defined(Q_OS_WINRT) // Q_OS_WINCE
 
 static inline QStringList qCmdLineArgs(int argc, char *argv[])
 {
@@ -159,8 +171,10 @@ static inline QStringList qCmdLineArgs(int argc, char *argv[])
     return args;
 }
 
-#endif // !Q_OS_WIN || Q_OS_WINRT
+#endif // Q_OS_WINRT
 
 QT_END_NAMESPACE
 
+#endif // Q_OS_WIN
+
 #endif // QCORECMDLINEARGS_WIN_P_H
diff --git a/src/corelib/kernel/qcoreevent.cpp b/src/corelib/kernel/qcoreevent.cpp
index edf262b8af..191ceaa37b 100644
--- a/src/corelib/kernel/qcoreevent.cpp
+++ b/src/corelib/kernel/qcoreevent.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,8 +35,9 @@
 #include "qcoreapplication.h"
 #include "qcoreapplication_p.h"
 
-#include "qmutex.h"
-#include "qset.h"
+#include "qbasicatomic.h"
+
+#include <limits>
 
 QT_BEGIN_NAMESPACE
 
@@ -183,6 +176,7 @@ QT_BEGIN_NAMESPACE
     \value MouseMove                        Mouse move (QMouseEvent).
     \value MouseTrackingChange              The mouse tracking state has changed.
     \value Move                             Widget's position changed (QMoveEvent).
+    \value NativeGesture                    The system has detected a gesture (QNativeGestureEvent).
     \value OrientationChange                The screens orientation has changes (QScreenOrientationChangeEvent)
     \value Paint                            Screen update necessary (QPaintEvent).
     \value PaletteChange                    Palette of the widget changed.
@@ -192,6 +186,7 @@ QT_BEGIN_NAMESPACE
     \value Polish                           The widget is polished.
     \value PolishRequest                    The widget should be polished.
     \value QueryWhatsThis                   The widget should accept the event if it has "What's This?" help.
+    \value ReadOnlyChange                   Widget's read-only state has changed (since Qt 5.4).
     \value RequestSoftwareInputPanel        A widget wants to open a software input panel (SIP).
     \value Resize                           Widget's size changed (QResizeEvent).
     \value ScrollPrepare                    The object needs to fill in its geometry information (QScrollPrepareEvent).
@@ -275,6 +270,7 @@ QT_BEGIN_NAMESPACE
     \omitvalue FutureCallOut
     \omitvalue NativeGesture
     \omitvalue WindowChangeInternal
+    \omitvalue ScreenChangeInternal
 */
 
 /*!
@@ -389,13 +385,71 @@ QEvent::~QEvent()
     The return value of this function is not defined for paint events.
 */
 
-class QEventUserEventRegistration
-{
-public:
-    QMutex mutex;
-    QSet<int> set;
+namespace {
+template <size_t N>
+struct QBasicAtomicBitField {
+    enum {
+        BitsPerInt = std::numeric_limits<uint>::digits,
+        NumInts = (N + BitsPerInt - 1) / BitsPerInt,
+        NumBits = N
+    };
+
+    // This atomic int points to the next (possibly) free ID saving
+    // the otherwise necessary scan through 'data':
+    QBasicAtomicInteger<uint> next;
+    QBasicAtomicInteger<uint> data[NumInts];
+
+    bool allocateSpecific(int which) Q_DECL_NOTHROW
+    {
+        QBasicAtomicInteger<uint> &entry = data[which / BitsPerInt];
+        const uint old = entry.load();
+        const uint bit = 1U << (which % BitsPerInt);
+        return !(old & bit) // wasn't taken
+            && entry.testAndSetRelaxed(old, old | bit); // still wasn't taken
+
+        // don't update 'next' here - it's unlikely that it will need
+        // to be updated, in the general case, and having 'next'
+        // trailing a bit is not a problem, as it is just a starting
+        // hint for allocateNext(), which, when wrong, will just
+        // result in a few more rounds through the allocateNext()
+        // loop.
+    }
+
+    int allocateNext() Q_DECL_NOTHROW
+    {
+        // Unroll loop to iterate over ints, then bits? Would save
+        // potentially a lot of cmpxchgs, because we can scan the
+        // whole int before having to load it again.
+
+        // Then again, this should never execute many iterations, so
+        // leave like this for now:
+        for (uint i = next.load(); i < NumBits; ++i) {
+            if (allocateSpecific(i)) {
+                // remember next (possibly) free id:
+                const uint oldNext = next.load();
+                next.testAndSetRelaxed(oldNext, qMax(i + 1, oldNext));
+                return i;
+            }
+        }
+        return -1;
+    }
 };
-Q_GLOBAL_STATIC(QEventUserEventRegistration, userEventRegistrationHelper)
+
+} // unnamed namespace
+
+typedef QBasicAtomicBitField<QEvent::MaxUser - QEvent::User + 1> UserEventTypeRegistry;
+
+static UserEventTypeRegistry userEventTypeRegistry;
+
+static inline int registerEventTypeZeroBased(int id) Q_DECL_NOTHROW
+{
+    // if the type hint hasn't been registered yet, take it:
+    if (id < UserEventTypeRegistry::NumBits && id >= 0 && userEventTypeRegistry.allocateSpecific(id))
+        return id;
+
+    // otherwise, ignore hint:
+    return userEventTypeRegistry.allocateNext();
+}
 
 /*!
     \since 4.4
@@ -410,30 +464,10 @@ Q_GLOBAL_STATIC(QEventUserEventRegistration, userEventRegistrationHelper)
     Returns -1 if all available values are already taken or the
     program is shutting down.
 */
-int QEvent::registerEventType(int hint)
+int QEvent::registerEventType(int hint) Q_DECL_NOTHROW
 {
-    QEventUserEventRegistration *userEventRegistration
-        = userEventRegistrationHelper();
-    if (!userEventRegistration)
-        return -1;
-
-    QMutexLocker locker(&userEventRegistration->mutex);
-
-    // if the type hint hasn't been registered yet, take it
-    if (hint >= QEvent::User && hint <= QEvent::MaxUser && !userEventRegistration->set.contains(hint)) {
-        userEventRegistration->set.insert(hint);
-        return hint;
-    }
-
-    // find a free event type, starting at MaxUser and decreasing
-    int id = QEvent::MaxUser;
-    while (userEventRegistration->set.contains(id) && id >= QEvent::User)
-        --id;
-    if (id >= QEvent::User) {
-        userEventRegistration->set.insert(id);
-        return id;
-    }
-    return -1;
+    const int result = registerEventTypeZeroBased(QEvent::MaxUser - hint);
+    return result < 0 ? -1 : QEvent::MaxUser - result ;
 }
 
 /*!
diff --git a/src/corelib/kernel/qcoreevent.h b/src/corelib/kernel/qcoreevent.h
index 8b58fdf55f..170f319ec9 100644
--- a/src/corelib/kernel/qcoreevent.h
+++ b/src/corelib/kernel/qcoreevent.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -150,6 +142,8 @@ public:
         WindowUnblocked = 104,                  // windows modal blocking has ended
         WindowStateChange = 105,
 
+        ReadOnlyChange = 106,                   // readonly state has changed
+
         ToolTip = 110,
         WhatsThis = 111,
         StatusTip = 112,
@@ -279,6 +273,7 @@ public:
         ApplicationStateChange = 214,
 
         WindowChangeInternal = 215,             // internal for QQuickWidget
+        ScreenChangeInternal = 216,
 
         // 512 reserved for Qt Jambi's MetaCall event
         // 513 reserved for Qt Jambi's DeleteOnMainThread event
@@ -300,7 +295,7 @@ public:
     inline void accept() { m_accept = true; }
     inline void ignore() { m_accept = false; }
 
-    static int registerEventType(int hint = -1);
+    static int registerEventType(int hint = -1) Q_DECL_NOTHROW;
 
 protected:
     QEventPrivate *d;
@@ -316,17 +311,10 @@ private:
     friend class QCoreApplicationPrivate;
     friend class QThreadData;
     friend class QApplication;
-    friend class QApplicationPrivate;
     friend class QShortcutMap;
-    friend class QETWidget;
     friend class QGraphicsView;
-    friend class QGraphicsViewPrivate;
     friend class QGraphicsScene;
     friend class QGraphicsScenePrivate;
-    friend class QWidgetWindow;
-#ifndef QT_NO_GESTURES
-    friend class QGestureManager;
-#endif
 };
 
 class Q_CORE_EXPORT QTimerEvent : public QEvent
diff --git a/src/corelib/kernel/qcoreglobaldata.cpp b/src/corelib/kernel/qcoreglobaldata.cpp
index df2fd7e70a..c66fcdd0d9 100644
--- a/src/corelib/kernel/qcoreglobaldata.cpp
+++ b/src/corelib/kernel/qcoreglobaldata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcoreglobaldata_p.h b/src/corelib/kernel/qcoreglobaldata_p.h
index 0a40da96f1..e750bdf82c 100644
--- a/src/corelib/kernel/qcoreglobaldata_p.h
+++ b/src/corelib/kernel/qcoreglobaldata_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcrashhandler.cpp b/src/corelib/kernel/qcrashhandler.cpp
index 55775935ba..7c15ee55a6 100644
--- a/src/corelib/kernel/qcrashhandler.cpp
+++ b/src/corelib/kernel/qcrashhandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qcrashhandler_p.h b/src/corelib/kernel/qcrashhandler_p.h
index bb3f2d1a46..6a28aa9502 100644
--- a/src/corelib/kernel/qcrashhandler_p.h
+++ b/src/corelib/kernel/qcrashhandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventdispatcher_blackberry.cpp b/src/corelib/kernel/qeventdispatcher_blackberry.cpp
index a52cc60eaa..047e3dff07 100644
--- a/src/corelib/kernel/qeventdispatcher_blackberry.cpp
+++ b/src/corelib/kernel/qeventdispatcher_blackberry.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventdispatcher_blackberry_p.h b/src/corelib/kernel/qeventdispatcher_blackberry_p.h
index 1764c244d8..3831c28d61 100644
--- a/src/corelib/kernel/qeventdispatcher_blackberry_p.h
+++ b/src/corelib/kernel/qeventdispatcher_blackberry_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventdispatcher_glib.cpp b/src/corelib/kernel/qeventdispatcher_glib.cpp
index e87e830c39..f2acf1a3e0 100644
--- a/src/corelib/kernel/qeventdispatcher_glib.cpp
+++ b/src/corelib/kernel/qeventdispatcher_glib.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -518,7 +510,7 @@ void QEventDispatcherGlib::registerTimer(int timerId, int interval, Qt::TimerTyp
         qWarning("QEventDispatcherGlib::registerTimer: invalid arguments");
         return;
     } else if (object->thread() != thread() || thread() != QThread::currentThread()) {
-        qWarning("QObject::startTimer: timers cannot be started from another thread");
+        qWarning("QEventDispatcherGlib::registerTimer: timers cannot be started from another thread");
         return;
     }
 #endif
@@ -534,7 +526,7 @@ bool QEventDispatcherGlib::unregisterTimer(int timerId)
         qWarning("QEventDispatcherGlib::unregisterTimer: invalid argument");
         return false;
     } else if (thread() != QThread::currentThread()) {
-        qWarning("QObject::killTimer: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherGlib::unregisterTimer: timers cannot be stopped from another thread");
         return false;
     }
 #endif
@@ -550,7 +542,7 @@ bool QEventDispatcherGlib::unregisterTimers(QObject *object)
         qWarning("QEventDispatcherGlib::unregisterTimers: invalid argument");
         return false;
     } else if (object->thread() != thread() || thread() != QThread::currentThread()) {
-        qWarning("QObject::killTimers: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherGlib::unregisterTimers: timers cannot be stopped from another thread");
         return false;
     }
 #endif
diff --git a/src/corelib/kernel/qeventdispatcher_glib_p.h b/src/corelib/kernel/qeventdispatcher_glib_p.h
index a2e7b6b33e..50820f478b 100644
--- a/src/corelib/kernel/qeventdispatcher_glib_p.h
+++ b/src/corelib/kernel/qeventdispatcher_glib_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventdispatcher_unix.cpp b/src/corelib/kernel/qeventdispatcher_unix.cpp
index 69363bc3c9..156e8624db 100644
--- a/src/corelib/kernel/qeventdispatcher_unix.cpp
+++ b/src/corelib/kernel/qeventdispatcher_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -338,7 +330,7 @@ void QEventDispatcherUNIX::registerTimer(int timerId, int interval, Qt::TimerTyp
         qWarning("QEventDispatcherUNIX::registerTimer: invalid arguments");
         return;
     } else if (obj->thread() != thread() || thread() != QThread::currentThread()) {
-        qWarning("QObject::startTimer: timers cannot be started from another thread");
+        qWarning("QEventDispatcherUNIX::registerTimer: timers cannot be started from another thread");
         return;
     }
 #endif
@@ -357,7 +349,7 @@ bool QEventDispatcherUNIX::unregisterTimer(int timerId)
         qWarning("QEventDispatcherUNIX::unregisterTimer: invalid argument");
         return false;
     } else if (thread() != QThread::currentThread()) {
-        qWarning("QObject::killTimer: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherUNIX::unregisterTimer: timers cannot be stopped from another thread");
         return false;
     }
 #endif
@@ -376,7 +368,7 @@ bool QEventDispatcherUNIX::unregisterTimers(QObject *object)
         qWarning("QEventDispatcherUNIX::unregisterTimers: invalid argument");
         return false;
     } else if (object->thread() != thread() || thread() != QThread::currentThread()) {
-        qWarning("QObject::killTimers: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherUNIX::unregisterTimers: timers cannot be stopped from another thread");
         return false;
     }
 #endif
diff --git a/src/corelib/kernel/qeventdispatcher_unix_p.h b/src/corelib/kernel/qeventdispatcher_unix_p.h
index 242aa9e695..37f180486e 100644
--- a/src/corelib/kernel/qeventdispatcher_unix_p.h
+++ b/src/corelib/kernel/qeventdispatcher_unix_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -136,7 +128,7 @@ protected:
 
     virtual int select(int nfds,
                        fd_set *readfds, fd_set *writefds, fd_set *exceptfds,
-                       timespec *timeout) Q_DECL_FINAL;
+                       timespec *timeout);
 };
 
 class Q_CORE_EXPORT QEventDispatcherUNIXPrivate : public QAbstractEventDispatcherPrivate
diff --git a/src/corelib/kernel/qeventdispatcher_win.cpp b/src/corelib/kernel/qeventdispatcher_win.cpp
index f38ac7bf26..7816edd3f9 100644
--- a/src/corelib/kernel/qeventdispatcher_win.cpp
+++ b/src/corelib/kernel/qeventdispatcher_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -908,13 +900,15 @@ void QEventDispatcherWin32::unregisterSocketNotifier(QSocketNotifier *notifier)
 
 void QEventDispatcherWin32::registerTimer(int timerId, int interval, Qt::TimerType timerType, QObject *object)
 {
+#ifndef QT_NO_DEBUG
     if (timerId < 1 || interval < 0 || !object) {
         qWarning("QEventDispatcherWin32::registerTimer: invalid arguments");
         return;
     } else if (object->thread() != thread() || thread() != QThread::currentThread()) {
-        qWarning("QObject::startTimer: timers cannot be started from another thread");
+        qWarning("QEventDispatcherWin32::registerTimer: timers cannot be started from another thread");
         return;
     }
+#endif
 
     Q_D(QEventDispatcherWin32);
 
@@ -936,15 +930,17 @@ void QEventDispatcherWin32::registerTimer(int timerId, int interval, Qt::TimerTy
 
 bool QEventDispatcherWin32::unregisterTimer(int timerId)
 {
+#ifndef QT_NO_DEBUG
     if (timerId < 1) {
         qWarning("QEventDispatcherWin32::unregisterTimer: invalid argument");
         return false;
     }
     QThread *currentThread = QThread::currentThread();
     if (thread() != currentThread) {
-        qWarning("QObject::killTimer: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherWin32::unregisterTimer: timers cannot be stopped from another thread");
         return false;
     }
+#endif
 
     Q_D(QEventDispatcherWin32);
     if (d->timerVec.isEmpty() || timerId <= 0)
@@ -962,15 +958,17 @@ bool QEventDispatcherWin32::unregisterTimer(int timerId)
 
 bool QEventDispatcherWin32::unregisterTimers(QObject *object)
 {
+#ifndef QT_NO_DEBUG
     if (!object) {
         qWarning("QEventDispatcherWin32::unregisterTimers: invalid argument");
         return false;
     }
     QThread *currentThread = QThread::currentThread();
     if (object->thread() != thread() || thread() != currentThread) {
-        qWarning("QObject::killTimers: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherWin32::unregisterTimers: timers cannot be stopped from another thread");
         return false;
     }
+#endif
 
     Q_D(QEventDispatcherWin32);
     if (d->timerVec.isEmpty())
diff --git a/src/corelib/kernel/qeventdispatcher_win_p.h b/src/corelib/kernel/qeventdispatcher_win_p.h
index 9bb553eabd..f9bb06a5c5 100644
--- a/src/corelib/kernel/qeventdispatcher_win_p.h
+++ b/src/corelib/kernel/qeventdispatcher_win_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventdispatcher_winrt.cpp b/src/corelib/kernel/qeventdispatcher_winrt.cpp
index 1d4b57642c..c48427f673 100644
--- a/src/corelib/kernel/qeventdispatcher_winrt.cpp
+++ b/src/corelib/kernel/qeventdispatcher_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 #include <QtCore/QCoreApplication>
 #include <QtCore/QThread>
 #include <QtCore/QHash>
+#include <QtCore/qfunctions_winrt.h>
 #include <private/qabstracteventdispatcher_p.h>
 #include <private/qcoreapplication_p.h>
 
@@ -71,8 +64,44 @@ public:
 
 struct WinRTTimerInfo                           // internal timer info
 {
-    WinRTTimerInfo() : timer(0) {}
+    WinRTTimerInfo(int timerId, int timerInterval, Qt::TimerType timerType, QObject *object, QEventDispatcherWinRT *dispatcher)
+        : isFinished(false), id(timerId), interval(timerInterval), timerType(timerType), obj(object), inTimerEvent(false), dispatcher(dispatcher)
+    {
+    }
+
+    void cancel()
+    {
+        if (isFinished) {
+            delete this;
+            return;
+        }
+        isFinished = true;
+        if (!timer)
+            return;
+
+        HRESULT hr = timer->Cancel();
+        RETURN_VOID_IF_FAILED("Failed to cancel timer");
+    }
+
+    HRESULT timerExpired(IThreadPoolTimer *)
+    {
+        if (isFinished)
+            return S_OK;
+        if (dispatcher)
+            QCoreApplication::postEvent(dispatcher, new QTimerEvent(id));
+        return S_OK;
+    }
 
+    HRESULT timerDestroyed(IThreadPoolTimer *)
+    {
+        if (isFinished)
+            delete this;
+        else
+            isFinished = true;
+        return S_OK;
+    }
+
+    bool isFinished;
     int id;
     int interval;
     Qt::TimerType timerType;
@@ -80,6 +109,7 @@ struct WinRTTimerInfo                           // internal timer info
     QObject *obj;                               // - object to receive events
     bool inTimerEvent;
     ComPtr<IThreadPoolTimer> timer;
+    QPointer<QEventDispatcherWinRT> dispatcher;
 };
 
 class QEventDispatcherWinRTPrivate : public QAbstractEventDispatcherPrivate
@@ -90,20 +120,37 @@ public:
     QEventDispatcherWinRTPrivate();
     ~QEventDispatcherWinRTPrivate();
 
-    void registerTimer(WinRTTimerInfo *t);
-    void unregisterTimer(WinRTTimerInfo *t);
-    void sendTimerEvent(int timerId);
-
 private:
-    static HRESULT timerExpiredCallback(IThreadPoolTimer *timer);
-
     QHash<int, WinRTTimerInfo*> timerDict;
-    QHash<IThreadPoolTimer *, int> timerIds;
 
     ComPtr<IThreadPoolTimerStatics> timerFactory;
     ComPtr<ICoreDispatcher> coreDispatcher;
+    QPointer<QThread> thread;
 
     bool interrupt;
+
+    void fetchCoreDispatcher()
+    {
+        ComPtr<ICoreImmersiveApplication> application;
+        HRESULT hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
+                                            IID_PPV_ARGS(&application));
+        RETURN_VOID_IF_FAILED("Failed to get the application factory");
+
+        ComPtr<ICoreApplicationView> view;
+        hr = application->get_MainView(&view);
+        RETURN_VOID_IF_FAILED("Failed to get the main view");
+
+        ComPtr<ICoreApplicationView2> view2;
+        hr = view.As(&view2);
+        RETURN_VOID_IF_FAILED("Failed to cast the main view");
+
+        hr = view2->get_Dispatcher(&coreDispatcher);
+        if (hr == HRESULT_FROM_WIN32(ERROR_NOT_FOUND)) // expected in thread pool cases
+            return;
+        RETURN_VOID_IF_FAILED("Failed to get core dispatcher");
+
+        thread = QThread::currentThread();
+    }
 };
 
 QEventDispatcherWinRT::QEventDispatcherWinRT(QObject *parent)
@@ -111,28 +158,14 @@ QEventDispatcherWinRT::QEventDispatcherWinRT(QObject *parent)
 {
     Q_D(QEventDispatcherWinRT);
 
-    // Only look up the event dispatcher in the main thread
-    if (QThread::currentThread() != QCoreApplicationPrivate::theMainThread)
+    // Special treatment for the WinMain thread, as it is created before the UI
+    static bool firstThread = true;
+    if (firstThread) {
+        firstThread = false;
         return;
-
-    ComPtr<ICoreApplication> application;
-    HRESULT hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
-                                        IID_PPV_ARGS(&application));
-    if (SUCCEEDED(hr)) {
-        ComPtr<ICoreApplicationView> view;
-        hr = application->GetCurrentView(&view);
-        if (SUCCEEDED(hr)) {
-            ComPtr<ICoreWindow> window;
-            hr = view->get_CoreWindow(&window);
-            if (SUCCEEDED(hr)) {
-                hr = window->get_Dispatcher(&d->coreDispatcher);
-                if (SUCCEEDED(hr))
-                    return;
-            }
-        }
     }
-    qCritical("QEventDispatcherWinRT: Unable to capture the core dispatcher. %s",
-              qPrintable(qt_error_string(hr)));
+
+    d->fetchCoreDispatcher();
 }
 
 QEventDispatcherWinRT::QEventDispatcherWinRT(QEventDispatcherWinRTPrivate &dd, QObject *parent)
@@ -147,11 +180,21 @@ bool QEventDispatcherWinRT::processEvents(QEventLoop::ProcessEventsFlags flags)
 {
     Q_D(QEventDispatcherWinRT);
 
+    if (d->thread && d->thread != QThread::currentThread())
+        d->fetchCoreDispatcher();
+
     bool didProcess = false;
     forever {
         // Process native events
-        if (d->coreDispatcher)
-            d->coreDispatcher->ProcessEvents(CoreProcessEventsOption_ProcessAllIfPresent);
+        if (d->coreDispatcher) {
+            boolean hasThreadAccess;
+            HRESULT hr = d->coreDispatcher->get_HasThreadAccess(&hasThreadAccess);
+            if (SUCCEEDED(hr) && hasThreadAccess) {
+                hr = d->coreDispatcher->ProcessEvents(CoreProcessEventsOption_ProcessAllIfPresent);
+                if (FAILED(hr))
+                    qErrnoWarning(hr, "Failed to process events");
+            }
+        }
 
         // Dispatch accumulated user events
         didProcess = sendPostedEvents(flags);
@@ -162,13 +205,12 @@ bool QEventDispatcherWinRT::processEvents(QEventLoop::ProcessEventsFlags flags)
             break;
 
         // Short sleep if there is nothing to do
-        if (flags & QEventLoop::WaitForMoreEvents) {
-            emit aboutToBlock();
-            WaitForSingleObjectEx(GetCurrentThread(), 1, FALSE);
-            emit awake();
-        } else {
+        if (!(flags & QEventLoop::WaitForMoreEvents))
             break;
-        }
+
+        emit aboutToBlock();
+        WaitForSingleObjectEx(GetCurrentThread(), 1, FALSE);
+        emit awake();
     }
     d->interrupt = false;
     return didProcess;
@@ -204,63 +246,86 @@ void QEventDispatcherWinRT::registerTimer(int timerId, int interval, Qt::TimerTy
 {
     Q_UNUSED(timerType);
 
+#ifndef QT_NO_DEBUG
     if (timerId < 1 || interval < 0 || !object) {
         qWarning("QEventDispatcherWinRT::registerTimer: invalid arguments");
         return;
     } else if (object->thread() != thread() || thread() != QThread::currentThread()) {
-        qWarning("QObject::startTimer: timers cannot be started from another thread");
+        qWarning("QEventDispatcherWinRT::registerTimer: timers cannot be started from another thread");
         return;
     }
+#endif
 
     Q_D(QEventDispatcherWinRT);
-    WinRTTimerInfo *t = new WinRTTimerInfo();
-    t->id = timerId;
-    t->interval = interval;
-    t->timerType = timerType;
-    t->obj = object;
-    t->inTimerEvent = false;
-
-    d->registerTimer(t);
+
+    WinRTTimerInfo *t = new WinRTTimerInfo(timerId, interval, timerType, object, this);
+    t->timeout = qt_msectime() + interval;
     d->timerDict.insert(t->id, t);
+
+    // Don't use timer factory for zero-delay timers
+    if (interval == 0u) {
+        QCoreApplication::postEvent(this, new QZeroTimerEvent(timerId));
+        return;
+    }
+
+    TimeSpan period;
+    period.Duration = interval ? (interval * 10000) : 1; // TimeSpan is based on 100-nanosecond units
+    HRESULT hr = d->timerFactory->CreatePeriodicTimerWithCompletion(
+                Callback<ITimerElapsedHandler>(t, &WinRTTimerInfo::timerExpired).Get(), period,
+                Callback<ITimerDestroyedHandler>(t, &WinRTTimerInfo::timerDestroyed).Get(), &t->timer);
+    if (FAILED(hr)) {
+        qErrnoWarning(hr, "Failed to create periodic timer");
+        delete t;
+        d->timerDict.remove(t->id);
+        return;
+    }
 }
 
 bool QEventDispatcherWinRT::unregisterTimer(int timerId)
 {
+#ifndef QT_NO_DEBUG
     if (timerId < 1) {
         qWarning("QEventDispatcherWinRT::unregisterTimer: invalid argument");
         return false;
     }
     if (thread() != QThread::currentThread()) {
-        qWarning("QObject::killTimer: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherWinRT::unregisterTimer: timers cannot be stopped from another thread");
         return false;
     }
+#endif
 
     Q_D(QEventDispatcherWinRT);
 
-    WinRTTimerInfo *t = d->timerDict.value(timerId);
+    WinRTTimerInfo *t = d->timerDict.take(timerId);
     if (!t)
         return false;
 
-    d->unregisterTimer(t);
+    t->cancel();
     return true;
 }
 
 bool QEventDispatcherWinRT::unregisterTimers(QObject *object)
 {
+#ifndef QT_NO_DEBUG
     if (!object) {
         qWarning("QEventDispatcherWinRT::unregisterTimers: invalid argument");
         return false;
     }
     QThread *currentThread = QThread::currentThread();
     if (object->thread() != thread() || thread() != currentThread) {
-        qWarning("QObject::killTimers: timers cannot be stopped from another thread");
+        qWarning("QEventDispatcherWinRT::unregisterTimers: timers cannot be stopped from another thread");
         return false;
     }
+#endif
 
     Q_D(QEventDispatcherWinRT);
-    foreach (WinRTTimerInfo *t, d->timerDict) {
-        if (t->obj == object)
-            d->unregisterTimer(t);
+    for (QHash<int, WinRTTimerInfo *>::iterator it = d->timerDict.begin(); it != d->timerDict.end();) {
+        if (it.value()->obj == object) {
+            it.value()->cancel();
+            it = d->timerDict.erase(it);
+            continue;
+        }
+        ++it;
     }
     return true;
 }
@@ -341,40 +406,41 @@ void QEventDispatcherWinRT::startingUp()
 void QEventDispatcherWinRT::closingDown()
 {
     Q_D(QEventDispatcherWinRT);
-    foreach (WinRTTimerInfo *t, d->timerDict)
-        d->unregisterTimer(t);
     d->timerDict.clear();
-    d->timerIds.clear();
 }
 
 bool QEventDispatcherWinRT::event(QEvent *e)
 {
     Q_D(QEventDispatcherWinRT);
-    if (e->type() == QEvent::ZeroTimerEvent) {
-        QZeroTimerEvent *zte = static_cast<QZeroTimerEvent*>(e);
-        WinRTTimerInfo *t = d->timerDict.value(zte->timerId());
-        if (t) {
+    bool ret = false;
+    switch (e->type()) {
+    case QEvent::ZeroTimerEvent:
+        ret = true;
+        // fall through
+    case QEvent::Timer: {
+        QTimerEvent *timerEvent = static_cast<QTimerEvent *>(e);
+        const int id = timerEvent->timerId();
+        if (WinRTTimerInfo *t = d->timerDict.value(id)) {
+            if (t->inTimerEvent) // but don't allow event to recurse
+                break;
             t->inTimerEvent = true;
 
-            QTimerEvent te(zte->timerId());
+            QTimerEvent te(id);
             QCoreApplication::sendEvent(t->obj, &te);
 
-            t = d->timerDict.value(zte->timerId());
-            if (t) {
+            if (t = d->timerDict.value(id)) {
                 if (t->interval == 0 && t->inTimerEvent) {
                     // post the next zero timer event as long as the timer was not restarted
-                    QCoreApplication::postEvent(this, new QZeroTimerEvent(zte->timerId()));
+                    QCoreApplication::postEvent(this, new QZeroTimerEvent(id));
                 }
-
                 t->inTimerEvent = false;
             }
         }
-        return true;
-    } else if (e->type() == QEvent::Timer) {
-        QTimerEvent *te = static_cast<QTimerEvent*>(e);
-        d->sendTimerEvent(te->timerId());
     }
-    return QAbstractEventDispatcher::event(e);
+    default:
+        break;
+    }
+    return ret ? true : QAbstractEventDispatcher::event(e);
 }
 
 QEventDispatcherWinRTPrivate::QEventDispatcherWinRTPrivate()
@@ -391,73 +457,4 @@ QEventDispatcherWinRTPrivate::~QEventDispatcherWinRTPrivate()
     CoUninitialize();
 }
 
-void QEventDispatcherWinRTPrivate::registerTimer(WinRTTimerInfo *t)
-{
-    Q_Q(QEventDispatcherWinRT);
-
-    bool ok = false;
-    uint interval = t->interval;
-    if (interval == 0u) {
-        // optimization for single-shot-zero-timer
-        QCoreApplication::postEvent(q, new QZeroTimerEvent(t->id));
-        ok = true;
-    } else {
-        TimeSpan period;
-        period.Duration = interval * 10000; // TimeSpan is based on 100-nanosecond units
-        ok = SUCCEEDED(timerFactory->CreatePeriodicTimer(
-                           Callback<ITimerElapsedHandler>(&QEventDispatcherWinRTPrivate::timerExpiredCallback).Get(), period, &t->timer));
-        if (ok)
-            timerIds.insert(t->timer.Get(), t->id);
-    }
-    t->timeout = qt_msectime() + interval;
-    if (!ok)
-        qErrnoWarning("QEventDispatcherWinRT::registerTimer: Failed to create a timer");
-}
-
-void QEventDispatcherWinRTPrivate::unregisterTimer(WinRTTimerInfo *t)
-{
-    if (t->timer) {
-        timerIds.remove(t->timer.Get());
-        t->timer->Cancel();
-    }
-    timerDict.remove(t->id);
-    delete t;
-}
-
-void QEventDispatcherWinRTPrivate::sendTimerEvent(int timerId)
-{
-    WinRTTimerInfo *t = timerDict.value(timerId);
-    if (t && !t->inTimerEvent) {
-        // send event, but don't allow it to recurse
-        t->inTimerEvent = true;
-
-        QTimerEvent e(t->id);
-        QCoreApplication::sendEvent(t->obj, &e);
-
-        // timer could have been removed
-        t = timerDict.value(timerId);
-        if (t)
-            t->inTimerEvent = false;
-    }
-}
-
-HRESULT QEventDispatcherWinRTPrivate::timerExpiredCallback(IThreadPoolTimer *timer)
-{
-    QThread *thread = QThread::currentThread();
-    if (!thread)
-        return E_FAIL;
-
-    QAbstractEventDispatcher *eventDispatcher = thread->eventDispatcher();
-    if (!eventDispatcher)
-        return E_FAIL;
-
-    QEventDispatcherWinRTPrivate *d = static_cast<QEventDispatcherWinRTPrivate *>(get(eventDispatcher));
-    int timerId = d->timerIds.value(timer, -1);
-    if (timerId < 0)
-        return E_FAIL; // A callback was received after the timer was canceled
-
-    QCoreApplication::postEvent(eventDispatcher, new QTimerEvent(timerId));
-    return S_OK;
-}
-
 QT_END_NAMESPACE
diff --git a/src/corelib/kernel/qeventdispatcher_winrt_p.h b/src/corelib/kernel/qeventdispatcher_winrt_p.h
index 5cc37fb538..96fa8dc9e6 100644
--- a/src/corelib/kernel/qeventdispatcher_winrt_p.h
+++ b/src/corelib/kernel/qeventdispatcher_winrt_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventloop.cpp b/src/corelib/kernel/qeventloop.cpp
index a93d6e4a21..1059ac9d67 100644
--- a/src/corelib/kernel/qeventloop.cpp
+++ b/src/corelib/kernel/qeventloop.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventloop.h b/src/corelib/kernel/qeventloop.h
index 926be08265..31cd1d402a 100644
--- a/src/corelib/kernel/qeventloop.h
+++ b/src/corelib/kernel/qeventloop.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qeventloop_p.h b/src/corelib/kernel/qeventloop_p.h
index 1a1743260b..74a29f0b62 100644
--- a/src/corelib/kernel/qeventloop_p.h
+++ b/src/corelib/kernel/qeventloop_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_nacl.cpp b/src/corelib/kernel/qfunctions_nacl.cpp
index 880263e677..89037e408c 100644
--- a/src/corelib/kernel/qfunctions_nacl.cpp
+++ b/src/corelib/kernel/qfunctions_nacl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_nacl.h b/src/corelib/kernel/qfunctions_nacl.h
index c15b9756d0..431eecc08f 100644
--- a/src/corelib/kernel/qfunctions_nacl.h
+++ b/src/corelib/kernel/qfunctions_nacl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_p.h b/src/corelib/kernel/qfunctions_p.h
index e3014a0dcf..b10d92398b 100644
--- a/src/corelib/kernel/qfunctions_p.h
+++ b/src/corelib/kernel/qfunctions_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_vxworks.cpp b/src/corelib/kernel/qfunctions_vxworks.cpp
index e1abecb9d6..5478f770e4 100644
--- a/src/corelib/kernel/qfunctions_vxworks.cpp
+++ b/src/corelib/kernel/qfunctions_vxworks.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_vxworks.h b/src/corelib/kernel/qfunctions_vxworks.h
index e33401a86a..79cf019691 100644
--- a/src/corelib/kernel/qfunctions_vxworks.h
+++ b/src/corelib/kernel/qfunctions_vxworks.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_wince.cpp b/src/corelib/kernel/qfunctions_wince.cpp
index b10a13289a..8efdb275af 100644
--- a/src/corelib/kernel/qfunctions_wince.cpp
+++ b/src/corelib/kernel/qfunctions_wince.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_wince.h b/src/corelib/kernel/qfunctions_wince.h
index c71bd6a142..cc5e0ca83f 100644
--- a/src/corelib/kernel/qfunctions_wince.h
+++ b/src/corelib/kernel/qfunctions_wince.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_winrt.cpp b/src/corelib/kernel/qfunctions_winrt.cpp
index 1348af2acb..84e7b5688f 100644
--- a/src/corelib/kernel/qfunctions_winrt.cpp
+++ b/src/corelib/kernel/qfunctions_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qfunctions_winrt.h b/src/corelib/kernel/qfunctions_winrt.h
index fa2b2e12ff..04ebda5cfe 100644
--- a/src/corelib/kernel/qfunctions_winrt.h
+++ b/src/corelib/kernel/qfunctions_winrt.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,7 +36,11 @@
 
 #include <QtCore/qglobal.h>
 
-#ifdef Q_OS_WINRT
+#ifdef Q_OS_WIN
+
+#include <QtCore/QThread>
+#include <QtCore/QAbstractEventDispatcher>
+#include <QtCore/qt_windows.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -53,6 +49,8 @@ QT_BEGIN_NAMESPACE
 
 QT_END_NAMESPACE
 
+#ifdef Q_OS_WINRT
+
 // Environment ------------------------------------------------------
 errno_t qt_winrt_getenv_s(size_t*, char*, size_t, const char*);
 errno_t qt_winrt__putenv_s(const char*, const char*);
@@ -119,4 +117,96 @@ generate_inline_return_func0(tzset, void)
 generate_inline_return_func0(_tzset, void)
 
 #endif // Q_OS_WINRT
+
+// Convenience macros for handling HRESULT values
+#define RETURN_IF_FAILED(msg, ret) \
+    if (FAILED(hr)) { \
+        qErrnoWarning(hr, msg); \
+        ret; \
+    }
+
+#define RETURN_HR_IF_FAILED(msg) RETURN_IF_FAILED(msg, return hr)
+#define RETURN_OK_IF_FAILED(msg) RETURN_IF_FAILED(msg, return S_OK)
+#define RETURN_FALSE_IF_FAILED(msg) RETURN_IF_FAILED(msg, return false)
+#define RETURN_VOID_IF_FAILED(msg) RETURN_IF_FAILED(msg, return)
+
+#define Q_ASSERT_SUCCEEDED(hr) \
+    Q_ASSERT_X(SUCCEEDED(hr), Q_FUNC_INFO, qPrintable(qt_error_string(hr)));
+
+
+namespace Microsoft { namespace WRL { template <typename T> class ComPtr; } }
+
+namespace QWinRTFunctions {
+
+// Synchronization methods
+enum AwaitStyle
+{
+    YieldThread = 0,
+    ProcessThreadEvents = 1,
+    ProcessMainThreadEvents = 2
+};
+
+template <typename T>
+static inline HRESULT _await_impl(const Microsoft::WRL::ComPtr<T> &asyncOp, AwaitStyle awaitStyle)
+{
+    Microsoft::WRL::ComPtr<IAsyncInfo> asyncInfo;
+    HRESULT hr = asyncOp.As(&asyncInfo);
+    if (FAILED(hr))
+        return hr;
+
+    AsyncStatus status;
+    switch (awaitStyle) {
+    case ProcessMainThreadEvents:
+        while (SUCCEEDED(hr = asyncInfo->get_Status(&status)) && status == Started)
+            QCoreApplication::processEvents();
+        break;
+    case ProcessThreadEvents:
+        if (QAbstractEventDispatcher *dispatcher = QThread::currentThread()->eventDispatcher()) {
+            while (SUCCEEDED(hr = asyncInfo->get_Status(&status)) && status == Started)
+                dispatcher->processEvents(QEventLoop::AllEvents);
+            break;
+        }
+        // fall through
+    default:
+    case YieldThread:
+        while (SUCCEEDED(hr = asyncInfo->get_Status(&status)) && status == Started)
+            QThread::yieldCurrentThread();
+        break;
+    }
+
+    if (FAILED(hr) || status != Completed) {
+        HRESULT ec;
+        hr = asyncInfo->get_ErrorCode(&ec);
+        if (FAILED(hr))
+            return hr;
+        return ec;
+    }
+
+    return hr;
+}
+
+template <typename T>
+static inline HRESULT await(const Microsoft::WRL::ComPtr<T> &asyncOp, AwaitStyle awaitStyle = YieldThread)
+{
+    HRESULT hr = _await_impl(asyncOp, awaitStyle);
+    if (FAILED(hr))
+        return hr;
+
+    return asyncOp->GetResults();
+}
+
+template <typename T, typename U>
+static inline HRESULT await(const Microsoft::WRL::ComPtr<T> &asyncOp, U *results, AwaitStyle awaitStyle = YieldThread)
+{
+    HRESULT hr = _await_impl(asyncOp, awaitStyle);
+    if (FAILED(hr))
+        return hr;
+
+    return asyncOp->GetResults(results);
+}
+
+} // QWinRTFunctions
+
+#endif // Q_OS_WIN
+
 #endif // QFUNCTIONS_WINRT_H
diff --git a/src/corelib/kernel/qjni.cpp b/src/corelib/kernel/qjni.cpp
index b240185d7e..173127b063 100644
--- a/src/corelib/kernel/qjni.cpp
+++ b/src/corelib/kernel/qjni.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -83,28 +75,58 @@ static inline bool exceptionCheckAndClear(JNIEnv *env)
 typedef QHash<QString, jclass> JClassHash;
 Q_GLOBAL_STATIC(JClassHash, cachedClasses)
 
-static jclass getCachedClass(JNIEnv *env, const char *className)
+static QString toDotEncodedClassName(const char *className)
+{
+    return QString::fromLatin1(className).replace(QLatin1Char('/'), QLatin1Char('.'));
+}
+
+static jclass getCachedClass(const QString &classDotEnc)
 {
-    jclass clazz = 0;
-    QString classDotEnc = QString::fromLatin1(className).replace(QLatin1Char('/'), QLatin1Char('.'));
     QHash<QString, jclass>::iterator it = cachedClasses->find(classDotEnc);
-    if (it == cachedClasses->end()) {
-        QJNIObjectPrivate classLoader = QtAndroidPrivate::classLoader();
-        if (!classLoader.isValid())
-            return 0;
 
-        QJNIObjectPrivate stringName = QJNIObjectPrivate::fromString(classDotEnc);
-        QJNIObjectPrivate classObject = classLoader.callObjectMethod("loadClass",
-                                                                     "(Ljava/lang/String;)Ljava/lang/Class;",
-                                                                     stringName.object());
+    if (it == cachedClasses->end())
+        return 0;
 
-        if (!exceptionCheckAndClear(env) && classObject.isValid())
-            clazz = static_cast<jclass>(env->NewGlobalRef(classObject.object()));
+    return it.value();
+}
 
-        cachedClasses->insert(classDotEnc, clazz);
-    } else {
-        clazz = it.value();
+static jclass findClass(const char *className, JNIEnv *env)
+{
+    const QString &classDotEnc = toDotEncodedClassName(className);
+    jclass clazz = getCachedClass(classDotEnc);
+    if (clazz != 0)
+        return clazz;
+
+    jclass fclazz = env->FindClass(className);
+    if (!exceptionCheckAndClear(env)) {
+        clazz = static_cast<jclass>(env->NewGlobalRef(fclazz));
+        env->DeleteLocalRef(fclazz);
     }
+
+    cachedClasses->insert(classDotEnc, clazz);
+    return clazz;
+}
+
+static jclass loadClass(const char *className, JNIEnv *env)
+{
+    const QString &classDotEnc = toDotEncodedClassName(className);
+    jclass clazz = getCachedClass(classDotEnc);
+    if (clazz != 0)
+        return clazz;
+
+    QJNIObjectPrivate classLoader = QtAndroidPrivate::classLoader();
+    if (!classLoader.isValid())
+        return 0;
+
+    QJNIObjectPrivate stringName = QJNIObjectPrivate::fromString(classDotEnc);
+    QJNIObjectPrivate classObject = classLoader.callObjectMethod("loadClass",
+                                                                 "(Ljava/lang/String;)Ljava/lang/Class;",
+                                                                 stringName.object());
+
+    if (!exceptionCheckAndClear(env) && classObject.isValid())
+        clazz = static_cast<jclass>(env->NewGlobalRef(classObject.object()));
+
+    cachedClasses->insert(classDotEnc, clazz);
     return clazz;
 }
 
@@ -200,6 +222,18 @@ JNIEnv *QJNIEnvironmentPrivate::operator->()
     return jniEnv;
 }
 
+jclass QJNIEnvironmentPrivate::findClass(const char *className, JNIEnv *env)
+{
+    jclass clazz = 0;
+    if (env != 0)
+        clazz = ::findClass(className, env);
+
+    if (clazz == 0)
+        clazz = loadClass(className, QJNIEnvironmentPrivate());
+
+    return clazz;
+}
+
 QJNIEnvironmentPrivate::operator JNIEnv* () const
 {
     return jniEnv;
@@ -236,7 +270,7 @@ QJNIObjectPrivate::QJNIObjectPrivate(const char *className)
     : d(new QJNIObjectData())
 {
     QJNIEnvironmentPrivate env;
-    d->m_jclass = getCachedClass(env, className);
+    d->m_jclass = loadClass(className, env);
     d->m_own_jclass = false;
     if (d->m_jclass) {
         // get default constructor
@@ -255,7 +289,7 @@ QJNIObjectPrivate::QJNIObjectPrivate(const char *className, const char *sig, ...
     : d(new QJNIObjectData())
 {
     QJNIEnvironmentPrivate env;
-    d->m_jclass = getCachedClass(env, className);
+    d->m_jclass = loadClass(className, env);
     d->m_own_jclass = false;
     if (d->m_jclass) {
         jmethodID constructorId = getCachedMethodID(env, d->m_jclass, "<init>", sig);
@@ -276,7 +310,7 @@ QJNIObjectPrivate::QJNIObjectPrivate(const char *className, const char *sig, va_
     : d(new QJNIObjectData())
 {
     QJNIEnvironmentPrivate env;
-    d->m_jclass = getCachedClass(env, className);
+    d->m_jclass = loadClass(className, env);
     d->m_own_jclass = false;
     if (d->m_jclass) {
         jmethodID constructorId = getCachedMethodID(env, d->m_jclass, "<init>", sig);
@@ -618,7 +652,7 @@ void QJNIObjectPrivate::callStaticMethod<void>(const char *className,
                                                va_list args)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -672,7 +706,7 @@ jboolean QJNIObjectPrivate::callStaticMethod<jboolean>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jboolean res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -733,7 +767,7 @@ jbyte QJNIObjectPrivate::callStaticMethod<jbyte>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jbyte res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -794,7 +828,7 @@ jchar QJNIObjectPrivate::callStaticMethod<jchar>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jchar res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -855,7 +889,7 @@ jshort QJNIObjectPrivate::callStaticMethod<jshort>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jshort res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -916,7 +950,7 @@ jint QJNIObjectPrivate::callStaticMethod<jint>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jint res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -977,7 +1011,7 @@ jlong QJNIObjectPrivate::callStaticMethod<jlong>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jlong res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -1038,7 +1072,7 @@ jfloat QJNIObjectPrivate::callStaticMethod<jfloat>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jfloat res = 0.f;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -1099,7 +1133,7 @@ jdouble QJNIObjectPrivate::callStaticMethod<jdouble>(const char *className,
 {
     QJNIEnvironmentPrivate env;
     jdouble res = 0.;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -1344,7 +1378,7 @@ QJNIObjectPrivate QJNIObjectPrivate::callStaticObjectMethod(const char *classNam
 {
     QJNIEnvironmentPrivate env;
     jobject res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz) {
         jmethodID id = getCachedMethodID(env, clazz, methodName, sig, true);
         if (id) {
@@ -1515,7 +1549,7 @@ jboolean QJNIObjectPrivate::getStaticField<jboolean>(const char *className, cons
 {
     QJNIEnvironmentPrivate env;
     jboolean res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jboolean>(clazz, fieldName);
 
@@ -1539,7 +1573,7 @@ jbyte QJNIObjectPrivate::getStaticField<jbyte>(const char *className, const char
 {
     QJNIEnvironmentPrivate env;
     jbyte res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jbyte>(clazz, fieldName);
 
@@ -1563,7 +1597,7 @@ jchar QJNIObjectPrivate::getStaticField<jchar>(const char *className, const char
 {
     QJNIEnvironmentPrivate env;
     jchar res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jchar>(clazz, fieldName);
 
@@ -1587,7 +1621,7 @@ jshort QJNIObjectPrivate::getStaticField<jshort>(const char *className, const ch
 {
     QJNIEnvironmentPrivate env;
     jshort res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jshort>(clazz, fieldName);
 
@@ -1611,7 +1645,7 @@ jint QJNIObjectPrivate::getStaticField<jint>(const char *className, const char *
 {
     QJNIEnvironmentPrivate env;
     jint res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jint>(clazz, fieldName);
 
@@ -1635,7 +1669,7 @@ jlong QJNIObjectPrivate::getStaticField<jlong>(const char *className, const char
 {
     QJNIEnvironmentPrivate env;
     jlong res = 0;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jlong>(clazz, fieldName);
 
@@ -1659,7 +1693,7 @@ jfloat QJNIObjectPrivate::getStaticField<jfloat>(const char *className, const ch
 {
     QJNIEnvironmentPrivate env;
     jfloat res = 0.f;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jfloat>(clazz, fieldName);
 
@@ -1683,7 +1717,7 @@ jdouble QJNIObjectPrivate::getStaticField<jdouble>(const char *className, const
 {
     QJNIEnvironmentPrivate env;
     jdouble res = 0.;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticField<jdouble>(clazz, fieldName);
 
@@ -1713,7 +1747,7 @@ QJNIObjectPrivate QJNIObjectPrivate::getStaticObjectField(const char *className,
 {
     QJNIEnvironmentPrivate env;
     QJNIObjectPrivate res;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         res = getStaticObjectField(clazz, fieldName, sig);
 
@@ -1949,7 +1983,7 @@ void QJNIObjectPrivate::setStaticField<jboolean>(const char *className,
                                                  jboolean value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jboolean>(clazz, fieldName, value);
 }
@@ -1971,7 +2005,7 @@ void QJNIObjectPrivate::setStaticField<jbyte>(const char *className,
                                               jbyte value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jbyte>(clazz, fieldName, value);
 }
@@ -1993,7 +2027,7 @@ void QJNIObjectPrivate::setStaticField<jchar>(const char *className,
                                               jchar value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jchar>(clazz, fieldName, value);
 }
@@ -2015,7 +2049,7 @@ void QJNIObjectPrivate::setStaticField<jshort>(const char *className,
                                                jshort value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jshort>(clazz, fieldName, value);
 }
@@ -2037,7 +2071,7 @@ void QJNIObjectPrivate::setStaticField<jint>(const char *className,
                                              jint value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jint>(clazz, fieldName, value);
 }
@@ -2059,7 +2093,7 @@ void QJNIObjectPrivate::setStaticField<jlong>(const char *className,
                                               jlong value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jlong>(clazz, fieldName, value);
 }
@@ -2081,7 +2115,7 @@ void QJNIObjectPrivate::setStaticField<jfloat>(const char *className,
                                                jfloat value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jfloat>(clazz, fieldName, value);
 }
@@ -2103,7 +2137,7 @@ void QJNIObjectPrivate::setStaticField<jdouble>(const char *className,
                                                 jdouble value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jdouble>(clazz, fieldName, value);
 }
@@ -2127,7 +2161,7 @@ void QJNIObjectPrivate::setStaticField<jobject>(const char *className,
                                                 jobject value)
 {
     QJNIEnvironmentPrivate env;
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     if (clazz)
         setStaticField<jobject>(clazz, fieldName, sig, value);
 }
@@ -2158,7 +2192,7 @@ bool QJNIObjectPrivate::isClassAvailable(const char *className)
     if (!env)
         return false;
 
-    jclass clazz = getCachedClass(env, className);
+    jclass clazz = loadClass(className, env);
     return (clazz != 0);
 }
 
diff --git a/src/corelib/kernel/qjni_p.h b/src/corelib/kernel/qjni_p.h
index 83dd3a00af..19f2cf7601 100644
--- a/src/corelib/kernel/qjni_p.h
+++ b/src/corelib/kernel/qjni_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,6 +58,7 @@ public:
     ~QJNIEnvironmentPrivate();
     JNIEnv *operator->();
     operator JNIEnv*() const;
+    static jclass findClass(const char *className, JNIEnv *env = 0);
 
 private:
     friend class QAndroidJniEnvironment;
diff --git a/src/corelib/kernel/qjnihelpers.cpp b/src/corelib/kernel/qjnihelpers.cpp
index cbd3d776a7..c82b5ca033 100644
--- a/src/corelib/kernel/qjnihelpers.cpp
+++ b/src/corelib/kernel/qjnihelpers.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qjnihelpers_p.h b/src/corelib/kernel/qjnihelpers_p.h
index 6d0d65f489..80c50ba611 100644
--- a/src/corelib/kernel/qjnihelpers_p.h
+++ b/src/corelib/kernel/qjnihelpers_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qjnionload.cpp b/src/corelib/kernel/qjnionload.cpp
index 22453e6db4..5d1cc75506 100644
--- a/src/corelib/kernel/qjnionload.cpp
+++ b/src/corelib/kernel/qjnionload.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmath.cpp b/src/corelib/kernel/qmath.cpp
index 9f276b4ca9..4be4c25deb 100644
--- a/src/corelib/kernel/qmath.cpp
+++ b/src/corelib/kernel/qmath.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Laszlo Papp <lpapp@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmath.h b/src/corelib/kernel/qmath.h
index 21e23b9eb0..997fd2ed0b 100644
--- a/src/corelib/kernel/qmath.h
+++ b/src/corelib/kernel/qmath.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -49,6 +41,7 @@
 #include <math.h>
 
 #include <QtCore/qglobal.h>
+#include <QtCore/qcompilerdetection.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -286,6 +279,57 @@ Q_DECL_CONSTEXPR inline double qRadiansToDegrees(double radians)
     return radians * (180 / M_PI);
 }
 
+
+#if defined(Q_CC_GNU)
+// clz instructions exist in at least MIPS, ARM, PowerPC and X86, so we can assume this builtin always maps to an efficient instruction.
+inline quint32 qNextPowerOfTwo(quint32 v)
+{
+    if (v == 0)
+        return 1;
+    return 2U << (31 ^ __builtin_clz(v));
+}
+
+inline quint64 qNextPowerOfTwo(quint64 v)
+{
+    if (v == 0)
+        return 1;
+    return Q_UINT64_C(2) << (63 ^ __builtin_clzll(v));
+}
+#else
+inline quint32 qNextPowerOfTwo(quint32 v)
+{
+    v |= v >> 1;
+    v |= v >> 2;
+    v |= v >> 4;
+    v |= v >> 8;
+    v |= v >> 16;
+    ++v;
+    return v;
+}
+
+inline quint64 qNextPowerOfTwo(quint64 v)
+{
+    v |= v >> 1;
+    v |= v >> 2;
+    v |= v >> 4;
+    v |= v >> 8;
+    v |= v >> 16;
+    v |= v >> 32;
+    ++v;
+    return v;
+}
+#endif
+
+inline quint32 qNextPowerOfTwo(qint32 v)
+{
+    return qNextPowerOfTwo(quint32(v));
+}
+
+inline quint64 qNextPowerOfTwo(qint64 v)
+{
+    return qNextPowerOfTwo(quint64(v));
+}
+
 QT_END_NAMESPACE
 
 #endif // QMATH_H
diff --git a/src/corelib/kernel/qmath.qdoc b/src/corelib/kernel/qmath.qdoc
index 04dbbb0a3b..430a420eeb 100644
--- a/src/corelib/kernel/qmath.qdoc
+++ b/src/corelib/kernel/qmath.qdoc
@@ -215,4 +215,37 @@
     \snippet code/src_corelib_kernel_qmath.cpp 3
 
     \sa qDegreesToRadians()
+
+/*!
+    \fn quint32 qNextPowerOfTwo(quint32 value)
+    \relates <QtMath>
+    \since 5.4
+
+    This function returns the nearest power of two greater than \a value. For 0 it returns 1, and for values larger than or equal to 2^31 it returns 0.
+*/
+
+/*!
+    \fn quint32 qNextPowerOfTwo(qint32 value)
+    \relates <QtMath>
+    \since 5.4
+    \overload
+
+    This function returns the nearest power of two greater than \a value. For negative values it returns 0.
+*/
+
+/*!
+    \fn quint64 qNextPowerOfTwo(quint64 value)
+    \relates <QtMath>
+    \since 5.4
+
+    This function returns the nearest power of two greater than \a value. For 0 it returns 1, and for values larger than or equal to 2^63 it returns 0.
+*/
+
+/*!
+    \fn quint64 qNextPowerOfTwo(qint64 value)
+    \relates <QtMath>
+    \since 5.4
+    \overload
+
+    This function returns the nearest power of two greater than \a value. For negative values it returns 0.
 */
diff --git a/src/corelib/kernel/qmetaobject.cpp b/src/corelib/kernel/qmetaobject.cpp
index 5be94429b4..b54cb0c344 100644
--- a/src/corelib/kernel/qmetaobject.cpp
+++ b/src/corelib/kernel/qmetaobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -163,11 +155,6 @@ static inline const char *rawStringData(const QMetaObject *mo, int index)
     return stringData(mo, index).data();
 }
 
-static inline int stringSize(const QMetaObject *mo, int index)
-{
-    return stringData(mo, index).size();
-}
-
 static inline QByteArray typeNameFromTypeInfo(const QMetaObject *mo, uint typeInfo)
 {
     if (typeInfo & IsUnresolvedType) {
@@ -308,6 +295,11 @@ int QMetaObject::metacall(QObject *object, Call cl, int idx, void **argv)
         return object->qt_metacall(cl, idx, argv);
 }
 
+static inline const char *objectClassName(const QMetaObject *m)
+{
+    return rawStringData(m, priv(m->d.data)->className);
+}
+
 /*!
     Returns the class name.
 
@@ -315,7 +307,7 @@ int QMetaObject::metacall(QObject *object, Call cl, int idx, void **argv)
 */
 const char *QMetaObject::className() const
 {
-    return rawStringData(this, 0);
+    return objectClassName(this);
 }
 
 /*!
@@ -369,7 +361,7 @@ const QObject *QMetaObject::cast(const QObject *obj) const
 */
 QString QMetaObject::tr(const char *s, const char *c, int n) const
 {
-    return QCoreApplication::translate(rawStringData(this, 0), s, c, n);
+    return QCoreApplication::translate(objectClassName(this), s, c, n);
 }
 #endif // QT_NO_TRANSLATION
 
@@ -728,7 +720,7 @@ int QMetaObjectPrivate::indexOfSignalRelative(const QMetaObject **baseObject,
             QMetaMethod conflictMethod = m->d.superdata->method(conflict);
             qWarning("QMetaObject::indexOfSignal: signal %s from %s redefined in %s",
                      conflictMethod.methodSignature().constData(),
-                     rawStringData(m->d.superdata, 0), rawStringData(m, 0));
+                     objectClassName(m->d.superdata), objectClassName(m));
         }
      }
  #endif
@@ -938,7 +930,7 @@ bool QMetaObjectPrivate::checkConnectArgs(const QMetaMethodPrivate *signal,
 static const QMetaObject *QMetaObject_findMetaObject(const QMetaObject *self, const char *name)
 {
     while (self) {
-        if (strcmp(rawStringData(self, 0), name) == 0)
+        if (strcmp(objectClassName(self), name) == 0)
             return self;
         if (self->d.relatedMetaObjects) {
             Q_ASSERT(priv(self->d.data)->revision >= 2);
@@ -1117,7 +1109,7 @@ QMetaProperty QMetaObject::property(int index) const
             result.menum = enumerator(indexOfEnumerator(type));
             if (!result.menum.isValid()) {
                 const char *enum_name = type;
-                const char *scope_name = rawStringData(this, 0);
+                const char *scope_name = objectClassName(this);
                 char *scope_buffer = 0;
 
                 const char *colon = strrchr(enum_name, ':');
@@ -1339,6 +1331,27 @@ QByteArray QMetaObject::normalizedSignature(const char *method)
 enum { MaximumParamCount = 11 }; // up to 10 arguments + 1 return value
 
 /*!
+    Returns the signatures of all methods whose name matches \a nonExistentMember,
+    or an empty QByteArray if there are no matches.
+*/
+static inline QByteArray findMethodCandidates(const QMetaObject *metaObject, const char *nonExistentMember)
+{
+    QByteArray candidateMessage;
+    // Prevent full string comparison in every iteration.
+    const QByteArray memberByteArray = nonExistentMember;
+    for (int i = 0; i < metaObject->methodCount(); ++i) {
+        const QMetaMethod method = metaObject->method(i);
+        if (method.name() == memberByteArray)
+            candidateMessage.append("    " + method.methodSignature() + '\n');
+    }
+    if (!candidateMessage.isEmpty()) {
+        candidateMessage.prepend("\nCandidates are:\n");
+        candidateMessage.chop(1);
+    }
+    return candidateMessage;
+}
+
+/*!
     Invokes the \a member (a signal or a slot name) on the object \a
     obj. Returns \c true if the member could be invoked. Returns \c false
     if there is no such member or the parameters did not match.
@@ -1455,8 +1468,9 @@ bool QMetaObject::invokeMethod(QObject *obj,
     }
 
     if (idx < 0 || idx >= meta->methodCount()) {
-        qWarning("QMetaObject::invokeMethod: No such method %s::%s",
-                 meta->className(), sig.constData());
+        // This method doesn't belong to us; print out a nice warning with candidates.
+        qWarning("QMetaObject::invokeMethod: No such method %s::%s%s",
+                 meta->className(), sig.constData(), findMethodCandidates(meta, member).constData());
         return false;
     }
     QMetaMethod method = meta->method(idx);
@@ -2412,7 +2426,7 @@ bool QMetaEnum::isFlag() const
 */
 const char *QMetaEnum::scope() const
 {
-    return mobj?rawStringData(mobj, 0) : 0;
+    return mobj ? objectClassName(mobj) : 0;
 }
 
 /*!
@@ -2444,7 +2458,8 @@ int QMetaEnum::keyToValue(const char *key, bool *ok) const
     int count = mobj->d.data[handle + 2];
     int data = mobj->d.data[handle + 3];
     for (int i = 0; i < count; ++i) {
-        if ((!scope || (stringSize(mobj, 0) == int(scope) && strncmp(qualified_key, rawStringData(mobj, 0), scope) == 0))
+        const QByteArray className = stringData(mobj, priv(mobj->d.data)->className);
+        if ((!scope || (className.size() == int(scope) && strncmp(qualified_key, className.constData(), scope) == 0))
              && strcmp(key, rawStringData(mobj, mobj->d.data[data + 2*i])) == 0) {
             if (ok != 0)
                 *ok = true;
@@ -2512,12 +2527,14 @@ int QMetaEnum::keysToValue(const char *keys, bool *ok) const
             key += scope + 2;
         }
         int i;
-        for (i = count-1; i >= 0; --i)
-            if ((!scope || (stringSize(mobj, 0) == int(scope) && strncmp(qualified_key.constData(), rawStringData(mobj, 0), scope) == 0))
+        for (i = count-1; i >= 0; --i) {
+            const QByteArray className = stringData(mobj, priv(mobj->d.data)->className);
+            if ((!scope || (className.size() == int(scope) && strncmp(qualified_key.constData(), className.constData(), scope) == 0))
                  && strcmp(key, rawStringData(mobj, mobj->d.data[data + 2*i])) == 0) {
                 value |= mobj->d.data[data + 2*i + 1];
                 break;
             }
+        }
         if (i < 0) {
             if (ok != 0)
                 *ok = false;
@@ -2895,15 +2912,7 @@ bool QMetaProperty::write(QObject *object, const QVariant &value) const
             typeName = rawStringData(mobj, typeInfo & TypeNameIndexMask);
             t = QMetaType::type(typeName);
         }
-        if (t == QMetaType::UnknownType) {
-            Q_ASSERT(typeName != 0);
-            const char *vtypeName = value.typeName();
-            if (vtypeName && strcmp(typeName, vtypeName) == 0)
-                t = value.userType();
-            else
-                t = QVariant::nameToType(typeName);
-        }
-        if (t == QVariant::Invalid)
+        if (t == QMetaType::UnknownType)
             return false;
         if (t != QMetaType::QVariant && t != (uint)value.userType() && (t < QMetaType::User && !v.convert((QVariant::Type)t)))
             return false;
diff --git a/src/corelib/kernel/qmetaobject.h b/src/corelib/kernel/qmetaobject.h
index 818613195d..47a39a033d 100644
--- a/src/corelib/kernel/qmetaobject.h
+++ b/src/corelib/kernel/qmetaobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmetaobject_moc_p.h b/src/corelib/kernel/qmetaobject_moc_p.h
index 1a7ca63ae1..f0dc89c8ee 100644
--- a/src/corelib/kernel/qmetaobject_moc_p.h
+++ b/src/corelib/kernel/qmetaobject_moc_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmetaobject_p.h b/src/corelib/kernel/qmetaobject_p.h
index ef66927eb1..c08838e456 100644
--- a/src/corelib/kernel/qmetaobject_p.h
+++ b/src/corelib/kernel/qmetaobject_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmetaobjectbuilder.cpp b/src/corelib/kernel/qmetaobjectbuilder.cpp
index 09d8271413..9e90a7f94e 100644
--- a/src/corelib/kernel/qmetaobjectbuilder.cpp
+++ b/src/corelib/kernel/qmetaobjectbuilder.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmetaobjectbuilder_p.h b/src/corelib/kernel/qmetaobjectbuilder_p.h
index 3a1b43c3ed..9544a9d2ee 100644
--- a/src/corelib/kernel/qmetaobjectbuilder_p.h
+++ b/src/corelib/kernel/qmetaobjectbuilder_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmetatype.cpp b/src/corelib/kernel/qmetatype.cpp
index f74c592e8c..311648c33a 100644
--- a/src/corelib/kernel/qmetatype.cpp
+++ b/src/corelib/kernel/qmetatype.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,6 +44,7 @@
 #include "qeasingcurve.h"
 #include "quuid.h"
 #include "qvariant.h"
+#include "qdatastream.h"
 #include "qmetatypeswitcher_p.h"
 
 #ifndef QT_BOOTSTRAPPED
@@ -64,6 +57,7 @@
 #  include "qjsonobject.h"
 #  include "qjsonarray.h"
 #  include "qjsondocument.h"
+#  include "qbytearraylist.h"
 #endif
 
 #ifndef QT_NO_GEOM_VARIANT
@@ -269,6 +263,7 @@ struct DefinedTypesFilter {
     \value QJsonDocument QJsonDocument
     \value QModelIndex QModelIndex
     \value QUuid QUuid
+    \value QByteArrayList QByteArrayList
 
     \value User  Base value for user types
     \value UnknownType This is an invalid type id. It is returned from QMetaType for types that are not registered
@@ -307,7 +302,7 @@ struct DefinedTypesFilter {
     name to a type so that it can be created and destructed
     dynamically at run-time. Declare new types with Q_DECLARE_METATYPE()
     to make them available to QVariant and other template-based functions.
-    Call qRegisterMetaType() to make type available to non-template based
+    Call qRegisterMetaType() to make types available to non-template based
     functions, such as the queued signal and slot connections.
 
     Any class or struct that has a public default
@@ -1190,6 +1185,9 @@ bool QMetaType::save(QDataStream &stream, int type, const void *data)
     case QMetaType::QVariant:
         stream << *static_cast<const NS(QVariant)*>(data);
         break;
+    case QMetaType::QByteArrayList:
+        stream << *static_cast<const NS(QByteArrayList)*>(data);
+        break;
 #endif
     case QMetaType::QByteArray:
         stream << *static_cast<const NS(QByteArray)*>(data);
@@ -1413,6 +1411,9 @@ bool QMetaType::load(QDataStream &stream, int type, void *data)
     case QMetaType::QVariant:
         stream >> *static_cast< NS(QVariant)*>(data);
         break;
+    case QMetaType::QByteArrayList:
+        stream >> *static_cast< NS(QByteArrayList)*>(data);
+        break;
 #endif
     case QMetaType::QByteArray:
         stream >> *static_cast< NS(QByteArray)*>(data);
@@ -2405,4 +2406,9 @@ const QMetaObject *metaObjectForQWidget()
 }
 }
 
+namespace QtMetaTypePrivate {
+const bool VectorBoolElements::true_element = true;
+const bool VectorBoolElements::false_element = false;
+}
+
 QT_END_NAMESPACE
diff --git a/src/corelib/kernel/qmetatype.h b/src/corelib/kernel/qmetatype.h
index 3b35a51e2c..3d859021b5 100644
--- a/src/corelib/kernel/qmetatype.h
+++ b/src/corelib/kernel/qmetatype.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -127,6 +119,7 @@ inline Q_DECL_CONSTEXPR int qMetaTypeId();
     F(QVariantMap, 8, QVariantMap) \
     F(QVariantList, 9, QVariantList) \
     F(QVariantHash, 28, QVariantHash) \
+    F(QByteArrayList, 49, QByteArrayList) \
 
 #define QT_FOR_EACH_STATIC_GUI_CLASS(F)\
     F(QFont, 64, QFont) \
@@ -180,6 +173,7 @@ inline Q_DECL_CONSTEXPR int qMetaTypeId();
     F(QVariantList, -1, QVariantList, "QList<QVariant>") \
     F(QVariantMap, -1, QVariantMap, "QMap<QString,QVariant>") \
     F(QVariantHash, -1, QVariantHash, "QHash<QString,QVariant>") \
+    F(QByteArrayList, -1, QByteArrayList, "QList<QByteArray>") \
 
 #define QT_FOR_EACH_STATIC_TYPE(F)\
     QT_FOR_EACH_STATIC_PRIMITIVE_TYPE(F)\
@@ -393,7 +387,7 @@ public:
         QT_FOR_EACH_STATIC_TYPE(QT_DEFINE_METATYPE_ID)
 
         FirstCoreType = Bool,
-        LastCoreType = QJsonDocument,
+        LastCoreType = QByteArrayList,
         FirstGuiType = QFont,
         LastGuiType = QPolygonF,
         FirstWidgetsType = QSizePolicy,
@@ -419,7 +413,7 @@ public:
         QEasingCurve = 29, QUuid = 30, QVariant = 41, QModelIndex = 42,
         QRegularExpression = 44,
         QJsonValue = 45, QJsonObject = 46, QJsonArray = 47, QJsonDocument = 48,
-        QObjectStar = 39, SChar = 40,
+        QByteArrayList = 49, QObjectStar = 39, SChar = 40,
         Void = 43,
         QVariantMap = 8, QVariantList = 9, QVariantHash = 28,
         QFont = 64, QPixmap = 65, QBrush = 66, QColor = 67, QPalette = 68,
@@ -782,7 +776,7 @@ private:
 };
 
 template<typename const_iterator>
-struct IteratorOwner
+struct IteratorOwnerCommon
 {
     static void assign(void **ptr, const_iterator iterator)
     {
@@ -804,6 +798,15 @@ struct IteratorOwner
         delete static_cast<const_iterator*>(*ptr);
     }
 
+    static bool equal(void * const *it, void * const *other)
+    {
+        return *static_cast<const_iterator*>(*it) == *static_cast<const_iterator*>(*other);
+    }
+};
+
+template<typename const_iterator>
+struct IteratorOwner : IteratorOwnerCommon<const_iterator>
+{
     static const void *getData(void * const *iterator)
     {
         return &**static_cast<const_iterator*>(*iterator);
@@ -813,16 +816,41 @@ struct IteratorOwner
     {
         return &*it;
     }
+};
 
-    static bool equal(void * const *it, void * const *other)
+struct Q_CORE_EXPORT VectorBoolElements
+{
+  static const bool true_element;
+  static const bool false_element;
+};
+
+template<>
+struct IteratorOwner<std::vector<bool>::const_iterator> : IteratorOwnerCommon<std::vector<bool>::const_iterator>
+{
+public:
+    static const void *getData(void * const *iterator)
     {
-        return *static_cast<const_iterator*>(*it) == *static_cast<const_iterator*>(*other);
+        return **static_cast<std::vector<bool>::const_iterator*>(*iterator) ?
+            &VectorBoolElements::true_element : &VectorBoolElements::false_element;
+    }
+
+    static const void *getData(const std::vector<bool>::const_iterator& it)
+    {
+        return *it ? &VectorBoolElements::true_element : &VectorBoolElements::false_element;
     }
 };
+
 template<typename value_type>
 struct IteratorOwner<const value_type*>
 {
-    static void assign(void **ptr, const value_type *iterator )
+private:
+    // We need to disable typed overloads of assign() and getData() if the value_type
+    // is void* to avoid overloads conflicts. We do it by injecting unaccessible Dummy
+    // type as part of the overload signature.
+    struct Dummy {};
+    typedef typename QtPrivate::if_<QtPrivate::is_same<value_type, void*>::value, Dummy, value_type>::type value_type_OR_Dummy;
+public:
+    static void assign(void **ptr, const value_type_OR_Dummy *iterator )
     {
         *ptr = const_cast<value_type*>(iterator);
     }
@@ -847,7 +875,7 @@ struct IteratorOwner<const value_type*>
         return *iterator;
     }
 
-    static const void *getData(const value_type *it)
+    static const void *getData(const value_type_OR_Dummy *it)
     {
         return it;
     }
@@ -894,11 +922,11 @@ struct ContainerAPI<QVector<T> > : CapabilitiesImpl<QVector<T> >
 
 template<typename T>
 struct ContainerAPI<std::vector<T> > : CapabilitiesImpl<std::vector<T> >
-{ static int size(const std::vector<T> *t) { return t->size(); } };
+{ static int size(const std::vector<T> *t) { return int(t->size()); } };
 
 template<typename T>
 struct ContainerAPI<std::list<T> > : CapabilitiesImpl<std::list<T> >
-{ static int size(const std::list<T> *t) { return t->size(); } };
+{ static int size(const std::list<T> *t) { return int(t->size()); } };
 
 class QSequentialIterableImpl
 {
@@ -1278,6 +1306,11 @@ namespace QtPrivate
         enum { Value = false };
     };
     template<>
+    struct IsPointerToTypeDerivedFromQObject<const void*>
+    {
+        enum { Value = false };
+    };
+    template<>
     struct IsPointerToTypeDerivedFromQObject<QObject*>
     {
         enum { Value = true };
@@ -1721,6 +1754,7 @@ QT_FOR_EACH_STATIC_WIDGETS_CLASS(QT_FORWARD_DECLARE_STATIC_TYPES_ITER)
 typedef QList<QVariant> QVariantList;
 typedef QMap<QString, QVariant> QVariantMap;
 typedef QHash<QString, QVariant> QVariantHash;
+typedef QList<QByteArray> QByteArrayList;
 
 #define Q_DECLARE_METATYPE_TEMPLATE_1ARG(SINGLE_ARG_TEMPLATE) \
 QT_BEGIN_NAMESPACE \
diff --git a/src/corelib/kernel/qmetatype_p.h b/src/corelib/kernel/qmetatype_p.h
index 95b9e2e394..c75d5ee792 100644
--- a/src/corelib/kernel/qmetatype_p.h
+++ b/src/corelib/kernel/qmetatype_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -207,6 +199,7 @@ template<> struct TypeDefinition<QJsonObject> { static const bool IsAvailable =
 template<> struct TypeDefinition<QJsonValue> { static const bool IsAvailable = false; };
 template<> struct TypeDefinition<QModelIndex> { static const bool IsAvailable = false; };
 template<> struct TypeDefinition<QUrl> { static const bool IsAvailable = false; };
+template<> struct TypeDefinition<QByteArrayList> { static const bool IsAvailable = false; };
 #endif
 #ifdef QT_NO_GEOM_VARIANT
 template<> struct TypeDefinition<QRect> { static const bool IsAvailable = false; };
diff --git a/src/corelib/kernel/qmetatypeswitcher_p.h b/src/corelib/kernel/qmetatypeswitcher_p.h
index 2916bde737..7650af5381 100644
--- a/src/corelib/kernel/qmetatypeswitcher_p.h
+++ b/src/corelib/kernel/qmetatypeswitcher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qmimedata.cpp b/src/corelib/kernel/qmimedata.cpp
index 5d2adb0561..15fdf57747 100644
--- a/src/corelib/kernel/qmimedata.cpp
+++ b/src/corelib/kernel/qmimedata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,6 +45,7 @@ struct QMimeDataStruct
     QString format;
     QVariant data;
 };
+Q_DECLARE_TYPEINFO(QMimeDataStruct, Q_MOVABLE_TYPE);
 
 class QMimeDataPrivate : public QObjectPrivate
 {
@@ -64,7 +57,7 @@ public:
 
     QVariant retrieveTypedData(const QString &format, QVariant::Type type) const;
 
-    QList<QMimeDataStruct> dataList;
+    QVector<QMimeDataStruct> dataList;
 };
 
 void QMimeDataPrivate::removeData(const QString &format)
@@ -294,7 +287,7 @@ QVariant QMimeDataPrivate::retrieveTypedData(const QString &format, QVariant::Ty
     data is encoded.
 
     On Windows, the MIME format does not always map directly to the
-    clipboard formats. Qt provides QWindowsMime to map clipboard
+    clipboard formats. Qt provides QWinMime to map clipboard
     formats to open-standard MIME formats. Similarly, the
     QMacPasteboardMime maps MIME to Mac flavors.
 
diff --git a/src/corelib/kernel/qmimedata.h b/src/corelib/kernel/qmimedata.h
index 84c73262b2..48da7a2f88 100644
--- a/src/corelib/kernel/qmimedata.h
+++ b/src/corelib/kernel/qmimedata.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qobject.cpp b/src/corelib/kernel/qobject.cpp
index 9ab952362c..492031d7fe 100644
--- a/src/corelib/kernel/qobject.cpp
+++ b/src/corelib/kernel/qobject.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,6 +55,7 @@
 #include <qsharedpointer.h>
 
 #include <private/qorderedmutexlocker_p.h>
+#include <private/qhooks_p.h>
 
 #include <new>
 
@@ -138,6 +131,7 @@ static inline QMutex *signalSlotLock(const QObject *o)
         uint(quintptr(o)) % sizeof(_q_ObjectMutexPool)/sizeof(QBasicMutex)]);
 }
 
+// ### Qt >= 5.6, remove qt_add/removeObject
 extern "C" Q_CORE_EXPORT void qt_addObject(QObject *)
 {}
 
@@ -223,13 +217,17 @@ QObjectPrivate::QObjectPrivate(int version)
 QObjectPrivate::~QObjectPrivate()
 {
     if (extraData && !extraData->runningTimers.isEmpty()) {
-        // unregister pending timers
-        if (threadData->eventDispatcher.load())
-            threadData->eventDispatcher.load()->unregisterTimers(q_ptr);
-
-        // release the timer ids back to the pool
-        for (int i = 0; i < extraData->runningTimers.size(); ++i)
-            QAbstractEventDispatcherPrivate::releaseTimerId(extraData->runningTimers.at(i));
+        if (Q_LIKELY(threadData->thread == QThread::currentThread())) {
+            // unregister pending timers
+            if (threadData->eventDispatcher.load())
+                threadData->eventDispatcher.load()->unregisterTimers(q_ptr);
+
+            // release the timer ids back to the pool
+            for (int i = 0; i < extraData->runningTimers.size(); ++i)
+                QAbstractEventDispatcherPrivate::releaseTimerId(extraData->runningTimers.at(i));
+        } else {
+            qWarning("QObject::~QObject: Timers cannot be stopped from another thread");
+        }
     }
 
     if (postedEvents)
@@ -680,7 +678,7 @@ void QMetaCallEvent::placeMetaCall(QObject *object)
     will remain in the old thread when moveToThread() is called.
 
     \target No copy constructor
-    \section1 No copy constructor or assignment operator
+    \section1 No Copy Constructor or Assignment Operator
 
     QObject has neither a copy constructor nor an assignment operator.
     This is by design. Actually, they are declared, but in a
@@ -725,7 +723,7 @@ void QMetaCallEvent::placeMetaCall(QObject *object)
     and both standard Qt widgets and user-created forms can be given dynamic
     properties.
 
-    \section1 Internationalization (i18n)
+    \section1 Internationalization (I18n)
 
     All QObject subclasses support Qt's translation features, making it possible
     to translate an application's user interface into different languages.
@@ -820,6 +818,8 @@ QObject::QObject(QObject *parent)
         }
     }
     qt_addObject(this);
+    if (Q_UNLIKELY(qtHookData[QHooks::AddQObject]))
+        reinterpret_cast<QHooks::AddQObjectCallback>(qtHookData[QHooks::AddQObject])(this);
 }
 
 /*!
@@ -851,6 +851,8 @@ QObject::QObject(QObjectPrivate &dd, QObject *parent)
         }
     }
     qt_addObject(this);
+    if (Q_UNLIKELY(qtHookData[QHooks::AddQObject]))
+        reinterpret_cast<QHooks::AddQObjectCallback>(qtHookData[QHooks::AddQObject])(this);
 }
 
 /*!
@@ -1028,6 +1030,8 @@ QObject::~QObject()
         d->deleteChildren();
 
     qt_removeObject(this);
+    if (Q_UNLIKELY(qtHookData[QHooks::RemoveQObject]))
+        reinterpret_cast<QHooks::RemoveQObjectCallback>(qtHookData[QHooks::RemoveQObject])(this);
 
     if (d->parent)        // remove it from parent object
         d->setParent_helper(0);
@@ -1607,15 +1611,18 @@ int QObject::startTimer(int interval, Qt::TimerType timerType)
 {
     Q_D(QObject);
 
-    if (interval < 0) {
+    if (Q_UNLIKELY(interval < 0)) {
         qWarning("QObject::startTimer: Timers cannot have negative intervals");
         return 0;
     }
-
-    if (!d->threadData->eventDispatcher.load()) {
+    if (Q_UNLIKELY(!d->threadData->eventDispatcher.load())) {
         qWarning("QObject::startTimer: Timers can only be used with threads started with QThread");
         return 0;
     }
+    if (Q_UNLIKELY(thread() != QThread::currentThread())) {
+        qWarning("QObject::startTimer: Timers cannot be started from another thread");
+        return 0;
+    }
     int timerId = d->threadData->eventDispatcher.load()->registerTimer(interval, timerType, this);
     if (!d->extraData)
         d->extraData = new QObjectPrivate::ExtraData;
@@ -1635,6 +1642,10 @@ int QObject::startTimer(int interval, Qt::TimerType timerType)
 void QObject::killTimer(int id)
 {
     Q_D(QObject);
+    if (Q_UNLIKELY(thread() != QThread::currentThread())) {
+        qWarning("QObject::killTimer: Timers cannot be stopped from another thread");
+        return;
+    }
     if (id) {
         int at = d->extraData ? d->extraData->runningTimers.indexOf(id) : -1;
         if (at == -1) {
@@ -3305,7 +3316,7 @@ bool QMetaObjectPrivate::disconnectHelper(QObjectPrivate::Connection *c,
     while (c) {
         if (c->receiver
             && (receiver == 0 || (c->receiver == receiver
-                           && (method_index < 0 || c->method() == method_index)
+                           && (method_index < 0 || (!c->isSlotObject && c->method() == method_index))
                            && (slot == 0 || (c->isSlotObject && c->slotObj->compare(slot)))))) {
             bool needToUnlock = false;
             QMutex *receiverMutex = 0;
@@ -3508,7 +3519,8 @@ void QMetaObject::connectSlotsByName(QObject *o)
 
     \a signal must be in the signal index range (see QObjectPrivate::signalIndex()).
 */
-static void queued_activate(QObject *sender, int signal, QObjectPrivate::Connection *c, void **argv)
+static void queued_activate(QObject *sender, int signal, QObjectPrivate::Connection *c, void **argv,
+                            QMutexLocker &locker)
 {
     const int *argumentTypes = c->argumentTypes.load();
     if (!argumentTypes && argumentTypes != &DIRECT_CONNECTION_ONLY) {
@@ -3533,8 +3545,28 @@ static void queued_activate(QObject *sender, int signal, QObjectPrivate::Connect
     Q_CHECK_PTR(args);
     types[0] = 0; // return type
     args[0] = 0; // return value
-    for (int n = 1; n < nargs; ++n)
-        args[n] = QMetaType::create((types[n] = argumentTypes[n-1]), argv[n]);
+
+    if (nargs > 1) {
+        for (int n = 1; n < nargs; ++n)
+            types[n] = argumentTypes[n-1];
+
+        locker.unlock();
+        for (int n = 1; n < nargs; ++n)
+            args[n] = QMetaType::create(types[n], argv[n]);
+        locker.relock();
+
+        if (!c->receiver) {
+            locker.unlock();
+            // we have been disconnected while the mutex was unlocked
+            for (int n = 1; n < nargs; ++n)
+                QMetaType::destroy(types[n], args[n]);
+            free(types);
+            free(args);
+            locker.relock();
+            return;
+        }
+    }
+
     QMetaCallEvent *ev = c->isSlotObject ?
         new QMetaCallEvent(c->slotObj, sender, signal, nargs, types, args) :
         new QMetaCallEvent(c->method_offset, c->method_relative, c->callFunction, sender, signal, nargs, types, args);
@@ -3634,7 +3666,7 @@ void QMetaObject::activate(QObject *sender, int signalOffset, int local_signal_i
             // put into the event queue
             if ((c->connectionType == Qt::AutoConnection && !receiverInSameThread)
                 || (c->connectionType == Qt::QueuedConnection)) {
-                queued_activate(sender, signal_index, c, argv ? argv : empty_argv);
+                queued_activate(sender, signal_index, c, argv ? argv : empty_argv, locker);
                 continue;
 #ifndef QT_NO_THREAD
             } else if (c->connectionType == Qt::BlockingQueuedConnection) {
@@ -3974,6 +4006,11 @@ void QObject::dumpObjectInfo()
                     c = c->nextConnectionList;
                     continue;
                 }
+                if (c->isSlotObject) {
+                    qDebug("          <functor or function pointer>");
+                    c = c->nextConnectionList;
+                    continue;
+                }
                 const QMetaObject *receiverMetaObject = c->receiver->metaObject();
                 const QMetaMethod method = receiverMetaObject->method(c->method());
                 qDebug("          --> %s::%s %s",
@@ -3992,11 +4029,15 @@ void QObject::dumpObjectInfo()
 
     if (d->senders) {
         for (QObjectPrivate::Connection *s = d->senders; s; s = s->next) {
-            const QMetaMethod slot = metaObject()->method(s->method());
-            qDebug("          <-- %s::%s  %s",
+            QByteArray slotName = QByteArrayLiteral("<unknown>");
+            if (!s->isSlotObject) {
+                const QMetaMethod slot = metaObject()->method(s->method());
+                slotName = slot.methodSignature();
+            }
+            qDebug("          <-- %s::%s %s",
                    s->sender->metaObject()->className(),
                    s->sender->objectName().isEmpty() ? "unnamed" : qPrintable(s->sender->objectName()),
-                   slot.methodSignature().constData());
+                   slotName.constData());
         }
     } else {
         qDebug("        <None>");
diff --git a/src/corelib/kernel/qobject.h b/src/corelib/kernel/qobject.h
index a54690606a..092c57ef7f 100644
--- a/src/corelib/kernel/qobject.h
+++ b/src/corelib/kernel/qobject.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -156,13 +148,17 @@ public:
 
     template<typename T>
     inline T findChild(const QString &aName = QString(), Qt::FindChildOptions options = Qt::FindChildrenRecursively) const
-    { return static_cast<T>(qt_qFindChild_helper(this, aName, reinterpret_cast<T>(0)->staticMetaObject, options)); }
+    {
+        typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type ObjType;
+        return static_cast<T>(qt_qFindChild_helper(this, aName, ObjType::staticMetaObject, options));
+    }
 
     template<typename T>
     inline QList<T> findChildren(const QString &aName = QString(), Qt::FindChildOptions options = Qt::FindChildrenRecursively) const
     {
+        typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type ObjType;
         QList<T> list;
-        qt_qFindChildren_helper(this, aName, reinterpret_cast<T>(0)->staticMetaObject,
+        qt_qFindChildren_helper(this, aName, ObjType::staticMetaObject,
                                 reinterpret_cast<QList<void *> *>(&list), options);
         return list;
     }
@@ -171,8 +167,9 @@ public:
     template<typename T>
     inline QList<T> findChildren(const QRegExp &re, Qt::FindChildOptions options = Qt::FindChildrenRecursively) const
     {
+        typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type ObjType;
         QList<T> list;
-        qt_qFindChildren_helper(this, re, reinterpret_cast<T>(0)->staticMetaObject,
+        qt_qFindChildren_helper(this, re, ObjType::staticMetaObject,
                                 reinterpret_cast<QList<void *> *>(&list), options);
         return list;
     }
@@ -182,8 +179,9 @@ public:
     template<typename T>
     inline QList<T> findChildren(const QRegularExpression &re, Qt::FindChildOptions options = Qt::FindChildrenRecursively) const
     {
+        typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type ObjType;
         QList<T> list;
-        qt_qFindChildren_helper(this, re, reinterpret_cast<T>(0)->staticMetaObject,
+        qt_qFindChildren_helper(this, re, ObjType::staticMetaObject,
                                 reinterpret_cast<QList<void *> *>(&list), options);
         return list;
     }
@@ -519,7 +517,7 @@ inline T qobject_cast(QObject *object)
     typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type ObjType;
     Q_STATIC_ASSERT_X(QtPrivate::HasQ_OBJECT_Macro<ObjType>::Value,
                     "qobject_cast requires the type to have a Q_OBJECT macro");
-    return static_cast<T>(reinterpret_cast<T>(object)->staticMetaObject.cast(object));
+    return static_cast<T>(ObjType::staticMetaObject.cast(object));
 }
 
 template <class T>
@@ -528,7 +526,7 @@ inline T qobject_cast(const QObject *object)
     typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type ObjType;
     Q_STATIC_ASSERT_X(QtPrivate::HasQ_OBJECT_Macro<ObjType>::Value,
                       "qobject_cast requires the type to have a Q_OBJECT macro");
-    return static_cast<T>(reinterpret_cast<T>(object)->staticMetaObject.cast(object));
+    return static_cast<T>(ObjType::staticMetaObject.cast(object));
 }
 
 
diff --git a/src/corelib/kernel/qobject_impl.h b/src/corelib/kernel/qobject_impl.h
index aea9d41c67..c02791bf37 100644
--- a/src/corelib/kernel/qobject_impl.h
+++ b/src/corelib/kernel/qobject_impl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qobject_p.h b/src/corelib/kernel/qobject_p.h
index 180887b370..ba26ff7bfb 100644
--- a/src/corelib/kernel/qobject_p.h
+++ b/src/corelib/kernel/qobject_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -149,7 +141,7 @@ public:
             //ref_ is 2 for the use in the internal lists, and for the use in QMetaObject::Connection
         }
         ~Connection();
-        int method() const { return method_offset + method_relative; }
+        int method() const { Q_ASSERT(!isSlotObject); return method_offset + method_relative; }
         void ref() { ref_.ref(); }
         void deref() {
             if (!ref_.deref()) {
diff --git a/src/corelib/kernel/qobjectcleanuphandler.cpp b/src/corelib/kernel/qobjectcleanuphandler.cpp
index 6638fc5c86..0914cc0334 100644
--- a/src/corelib/kernel/qobjectcleanuphandler.cpp
+++ b/src/corelib/kernel/qobjectcleanuphandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qobjectcleanuphandler.h b/src/corelib/kernel/qobjectcleanuphandler.h
index 1f053cc34b..fb8bf4b5b5 100644
--- a/src/corelib/kernel/qobjectcleanuphandler.h
+++ b/src/corelib/kernel/qobjectcleanuphandler.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qobjectdefs.h b/src/corelib/kernel/qobjectdefs.h
index fe107f1425..25e43d0ca0 100644
--- a/src/corelib/kernel/qobjectdefs.h
+++ b/src/corelib/kernel/qobjectdefs.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qobjectdefs_impl.h b/src/corelib/kernel/qobjectdefs_impl.h
index de95fcc313..a6bb3ad955 100644
--- a/src/corelib/kernel/qobjectdefs_impl.h
+++ b/src/corelib/kernel/qobjectdefs_impl.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qpointer.cpp b/src/corelib/kernel/qpointer.cpp
index 692329f942..1a7d0930de 100644
--- a/src/corelib/kernel/qpointer.cpp
+++ b/src/corelib/kernel/qpointer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qpointer.h b/src/corelib/kernel/qpointer.h
index 230b6b66eb..037effcd68 100644
--- a/src/corelib/kernel/qpointer.h
+++ b/src/corelib/kernel/qpointer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qppsattribute.cpp b/src/corelib/kernel/qppsattribute.cpp
index 93d7ae756e..09d8d1bb0c 100644
--- a/src/corelib/kernel/qppsattribute.cpp
+++ b/src/corelib/kernel/qppsattribute.cpp
@@ -5,36 +5,28 @@
  **
  ** This file is part of the QtCore module of the Qt Toolkit.
  **
- ** $QT_BEGIN_LICENSE:LGPL$
+ ** $QT_BEGIN_LICENSE:LGPL21$
  ** Commercial License Usage
  ** Licensees holding valid commercial Qt licenses may use this file in
  ** accordance with the commercial license agreement provided with the
  ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and Digia.  For licensing terms and
- ** conditions see http://qt.digia.com/licensing.  For further information
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
  ** use the contact form at http://qt.digia.com/contact-us.
  **
  ** GNU Lesser General Public License Usage
  ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 2.1 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU Lesser General Public License version 2.1 requirements
- ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
  **
  ** In addition, as a special exception, Digia gives you certain additional
- ** rights.  These rights are described in the Digia Qt LGPL Exception
+ ** rights. These rights are described in the Digia Qt LGPL Exception
  ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
  **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 3.0 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU General Public License version 3.0 requirements will be
- ** met: http://www.gnu.org/copyleft/gpl.html.
- **
- **
  ** $QT_END_LICENSE$
  **
  ****************************************************************************/
diff --git a/src/corelib/kernel/qppsattribute_p.h b/src/corelib/kernel/qppsattribute_p.h
index 03a0f98a17..209a8c3101 100644
--- a/src/corelib/kernel/qppsattribute_p.h
+++ b/src/corelib/kernel/qppsattribute_p.h
@@ -5,36 +5,28 @@
  **
  ** This file is part of the QtCore module of the Qt Toolkit.
  **
- ** $QT_BEGIN_LICENSE:LGPL$
+ ** $QT_BEGIN_LICENSE:LGPL21$
  ** Commercial License Usage
  ** Licensees holding valid commercial Qt licenses may use this file in
  ** accordance with the commercial license agreement provided with the
  ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and Digia.  For licensing terms and
- ** conditions see http://qt.digia.com/licensing.  For further information
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
  ** use the contact form at http://qt.digia.com/contact-us.
  **
  ** GNU Lesser General Public License Usage
  ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 2.1 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU Lesser General Public License version 2.1 requirements
- ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
  **
  ** In addition, as a special exception, Digia gives you certain additional
- ** rights.  These rights are described in the Digia Qt LGPL Exception
+ ** rights. These rights are described in the Digia Qt LGPL Exception
  ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
  **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 3.0 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU General Public License version 3.0 requirements will be
- ** met: http://www.gnu.org/copyleft/gpl.html.
- **
- **
  ** $QT_END_LICENSE$
  **
  ****************************************************************************/
diff --git a/src/corelib/kernel/qppsattributeprivate_p.h b/src/corelib/kernel/qppsattributeprivate_p.h
index 0aa29d0895..4b40d90f8e 100644
--- a/src/corelib/kernel/qppsattributeprivate_p.h
+++ b/src/corelib/kernel/qppsattributeprivate_p.h
@@ -5,36 +5,28 @@
  **
  ** This file is part of the QtCore module of the Qt Toolkit.
  **
- ** $QT_BEGIN_LICENSE:LGPL$
+ ** $QT_BEGIN_LICENSE:LGPL21$
  ** Commercial License Usage
  ** Licensees holding valid commercial Qt licenses may use this file in
  ** accordance with the commercial license agreement provided with the
  ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and Digia.  For licensing terms and
- ** conditions see http://qt.digia.com/licensing.  For further information
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
  ** use the contact form at http://qt.digia.com/contact-us.
  **
  ** GNU Lesser General Public License Usage
  ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 2.1 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU Lesser General Public License version 2.1 requirements
- ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
  **
  ** In addition, as a special exception, Digia gives you certain additional
- ** rights.  These rights are described in the Digia Qt LGPL Exception
+ ** rights. These rights are described in the Digia Qt LGPL Exception
  ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
  **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 3.0 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU General Public License version 3.0 requirements will be
- ** met: http://www.gnu.org/copyleft/gpl.html.
- **
- **
  ** $QT_END_LICENSE$
  **
  ****************************************************************************/
diff --git a/src/corelib/kernel/qppsobject.cpp b/src/corelib/kernel/qppsobject.cpp
index 1095ad51da..9a5ae3c7a4 100644
--- a/src/corelib/kernel/qppsobject.cpp
+++ b/src/corelib/kernel/qppsobject.cpp
@@ -5,36 +5,28 @@
  **
  ** This file is part of the QtCore module of the Qt Toolkit.
  **
- ** $QT_BEGIN_LICENSE:LGPL$
+ ** $QT_BEGIN_LICENSE:LGPL21$
  ** Commercial License Usage
  ** Licensees holding valid commercial Qt licenses may use this file in
  ** accordance with the commercial license agreement provided with the
  ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and Digia.  For licensing terms and
- ** conditions see http://qt.digia.com/licensing.  For further information
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
  ** use the contact form at http://qt.digia.com/contact-us.
  **
  ** GNU Lesser General Public License Usage
  ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 2.1 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU Lesser General Public License version 2.1 requirements
- ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
  **
  ** In addition, as a special exception, Digia gives you certain additional
- ** rights.  These rights are described in the Digia Qt LGPL Exception
+ ** rights. These rights are described in the Digia Qt LGPL Exception
  ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
  **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 3.0 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU General Public License version 3.0 requirements will be
- ** met: http://www.gnu.org/copyleft/gpl.html.
- **
- **
  ** $QT_END_LICENSE$
  **
  ****************************************************************************/
diff --git a/src/corelib/kernel/qppsobject_p.h b/src/corelib/kernel/qppsobject_p.h
index 1095796a13..d5a4f12e45 100644
--- a/src/corelib/kernel/qppsobject_p.h
+++ b/src/corelib/kernel/qppsobject_p.h
@@ -5,36 +5,28 @@
  **
  ** This file is part of the QtCore module of the Qt Toolkit.
  **
- ** $QT_BEGIN_LICENSE:LGPL$
+ ** $QT_BEGIN_LICENSE:LGPL21$
  ** Commercial License Usage
  ** Licensees holding valid commercial Qt licenses may use this file in
  ** accordance with the commercial license agreement provided with the
  ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and Digia.  For licensing terms and
- ** conditions see http://qt.digia.com/licensing.  For further information
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
  ** use the contact form at http://qt.digia.com/contact-us.
  **
  ** GNU Lesser General Public License Usage
  ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 2.1 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU Lesser General Public License version 2.1 requirements
- ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
  **
  ** In addition, as a special exception, Digia gives you certain additional
- ** rights.  These rights are described in the Digia Qt LGPL Exception
+ ** rights. These rights are described in the Digia Qt LGPL Exception
  ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
  **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 3.0 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU General Public License version 3.0 requirements will be
- ** met: http://www.gnu.org/copyleft/gpl.html.
- **
- **
  ** $QT_END_LICENSE$
  **
  ****************************************************************************/
diff --git a/src/corelib/kernel/qppsobjectprivate_p.h b/src/corelib/kernel/qppsobjectprivate_p.h
index d291d6b559..767d49475b 100644
--- a/src/corelib/kernel/qppsobjectprivate_p.h
+++ b/src/corelib/kernel/qppsobjectprivate_p.h
@@ -5,36 +5,28 @@
  **
  ** This file is part of the QtCore module of the Qt Toolkit.
  **
- ** $QT_BEGIN_LICENSE:LGPL$
+ ** $QT_BEGIN_LICENSE:LGPL21$
  ** Commercial License Usage
  ** Licensees holding valid commercial Qt licenses may use this file in
  ** accordance with the commercial license agreement provided with the
  ** Software or, alternatively, in accordance with the terms contained in
- ** a written agreement between you and Digia.  For licensing terms and
- ** conditions see http://qt.digia.com/licensing.  For further information
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
  ** use the contact form at http://qt.digia.com/contact-us.
  **
  ** GNU Lesser General Public License Usage
  ** Alternatively, this file may be used under the terms of the GNU Lesser
- ** General Public License version 2.1 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.LGPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU Lesser General Public License version 2.1 requirements
- ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
  **
  ** In addition, as a special exception, Digia gives you certain additional
- ** rights.  These rights are described in the Digia Qt LGPL Exception
+ ** rights. These rights are described in the Digia Qt LGPL Exception
  ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
  **
- ** GNU General Public License Usage
- ** Alternatively, this file may be used under the terms of the GNU
- ** General Public License version 3.0 as published by the Free Software
- ** Foundation and appearing in the file LICENSE.GPL included in the
- ** packaging of this file.  Please review the following information to
- ** ensure the GNU General Public License version 3.0 requirements will be
- ** met: http://www.gnu.org/copyleft/gpl.html.
- **
- **
  ** $QT_END_LICENSE$
  **
  ****************************************************************************/
diff --git a/src/corelib/kernel/qsharedmemory.cpp b/src/corelib/kernel/qsharedmemory.cpp
index cde42c4f6e..22d1148677 100644
--- a/src/corelib/kernel/qsharedmemory.cpp
+++ b/src/corelib/kernel/qsharedmemory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsharedmemory.h b/src/corelib/kernel/qsharedmemory.h
index 6b44548f44..9385caa67a 100644
--- a/src/corelib/kernel/qsharedmemory.h
+++ b/src/corelib/kernel/qsharedmemory.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsharedmemory_android.cpp b/src/corelib/kernel/qsharedmemory_android.cpp
index 33ebb6966a..dcac51427b 100644
--- a/src/corelib/kernel/qsharedmemory_android.cpp
+++ b/src/corelib/kernel/qsharedmemory_android.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsharedmemory_p.h b/src/corelib/kernel/qsharedmemory_p.h
index 9f1e6c8aa1..0e2f40bf8c 100644
--- a/src/corelib/kernel/qsharedmemory_p.h
+++ b/src/corelib/kernel/qsharedmemory_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsharedmemory_unix.cpp b/src/corelib/kernel/qsharedmemory_unix.cpp
index 24598538e5..8d616af4fe 100644
--- a/src/corelib/kernel/qsharedmemory_unix.cpp
+++ b/src/corelib/kernel/qsharedmemory_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsharedmemory_win.cpp b/src/corelib/kernel/qsharedmemory_win.cpp
index fd79a7efea..41d25bbd43 100644
--- a/src/corelib/kernel/qsharedmemory_win.cpp
+++ b/src/corelib/kernel/qsharedmemory_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsignalmapper.cpp b/src/corelib/kernel/qsignalmapper.cpp
index 787ab91e91..95bbb76f3e 100644
--- a/src/corelib/kernel/qsignalmapper.cpp
+++ b/src/corelib/kernel/qsignalmapper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsignalmapper.h b/src/corelib/kernel/qsignalmapper.h
index 997e8e46de..e63153748f 100644
--- a/src/corelib/kernel/qsignalmapper.h
+++ b/src/corelib/kernel/qsignalmapper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsocketnotifier.cpp b/src/corelib/kernel/qsocketnotifier.cpp
index 6470873d9a..7a70400e7d 100644
--- a/src/corelib/kernel/qsocketnotifier.cpp
+++ b/src/corelib/kernel/qsocketnotifier.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -274,6 +266,10 @@ void QSocketNotifier::setEnabled(bool enable)
 
     if (!d->threadData->eventDispatcher.load()) // perhaps application/thread is shutting down
         return;
+    if (Q_UNLIKELY(thread() != QThread::currentThread())) {
+        qWarning("QSocketNotifier: Socket notifiers cannot be enabled or disabled from another thread");
+        return;
+    }
     if (d->snenabled)
         d->threadData->eventDispatcher.load()->registerSocketNotifier(this);
     else
diff --git a/src/corelib/kernel/qsocketnotifier.h b/src/corelib/kernel/qsocketnotifier.h
index 8cc6b9c4c4..57535b0d71 100644
--- a/src/corelib/kernel/qsocketnotifier.h
+++ b/src/corelib/kernel/qsocketnotifier.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemerror.cpp b/src/corelib/kernel/qsystemerror.cpp
index e22ea75e15..5c185e1d62 100644
--- a/src/corelib/kernel/qsystemerror.cpp
+++ b/src/corelib/kernel/qsystemerror.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemerror_p.h b/src/corelib/kernel/qsystemerror_p.h
index 4b46011129..e9acbe0864 100644
--- a/src/corelib/kernel/qsystemerror_p.h
+++ b/src/corelib/kernel/qsystemerror_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemsemaphore.cpp b/src/corelib/kernel/qsystemsemaphore.cpp
index 82e14e6f3f..27955885a8 100644
--- a/src/corelib/kernel/qsystemsemaphore.cpp
+++ b/src/corelib/kernel/qsystemsemaphore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemsemaphore.h b/src/corelib/kernel/qsystemsemaphore.h
index b7dd220832..4abf87f43c 100644
--- a/src/corelib/kernel/qsystemsemaphore.h
+++ b/src/corelib/kernel/qsystemsemaphore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemsemaphore_android.cpp b/src/corelib/kernel/qsystemsemaphore_android.cpp
index 6251cd822a..8ff47960f8 100644
--- a/src/corelib/kernel/qsystemsemaphore_android.cpp
+++ b/src/corelib/kernel/qsystemsemaphore_android.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemsemaphore_p.h b/src/corelib/kernel/qsystemsemaphore_p.h
index b34ec1b9a7..d71ab4bc36 100644
--- a/src/corelib/kernel/qsystemsemaphore_p.h
+++ b/src/corelib/kernel/qsystemsemaphore_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemsemaphore_unix.cpp b/src/corelib/kernel/qsystemsemaphore_unix.cpp
index 8f439c94a0..3d0cc76804 100644
--- a/src/corelib/kernel/qsystemsemaphore_unix.cpp
+++ b/src/corelib/kernel/qsystemsemaphore_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qsystemsemaphore_win.cpp b/src/corelib/kernel/qsystemsemaphore_win.cpp
index 77f7a60814..5f317ccf6a 100644
--- a/src/corelib/kernel/qsystemsemaphore_win.cpp
+++ b/src/corelib/kernel/qsystemsemaphore_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qtcore_eval.cpp b/src/corelib/kernel/qtcore_eval.cpp
index a5c4c36638..c0f8897b3b 100644
--- a/src/corelib/kernel/qtcore_eval.cpp
+++ b/src/corelib/kernel/qtcore_eval.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -119,9 +111,11 @@ static EvaluationStatus qt_eval_is_supported()
 
 static int qt_eval_days_left()
 {
+    const char *expiry_date = const_cast<const char*>(qt_eval_expiry_date + 12);
+
     QDate today = QDate::currentDate();
-    QDate build = QLibraryInfo::buildDate();
-    return qMax<qint64>(-1, today.daysTo(build) + 30);
+    QDate lastday = QDate::fromString(QString::fromLatin1(expiry_date), Qt::ISODate);
+    return today.daysTo(lastday);
 }
 
 static bool qt_eval_is_expired()
diff --git a/src/corelib/kernel/qtimer.cpp b/src/corelib/kernel/qtimer.cpp
index db6ff568bd..0803cf302e 100644
--- a/src/corelib/kernel/qtimer.cpp
+++ b/src/corelib/kernel/qtimer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -260,26 +252,50 @@ class QSingleShotTimer : public QObject
 {
     Q_OBJECT
     int timerId;
+    bool hasValidReceiver;
+    QPointer<const QObject> receiver;
+    QtPrivate::QSlotObjectBase *slotObj;
 public:
     ~QSingleShotTimer();
     QSingleShotTimer(int msec, Qt::TimerType timerType, const QObject *r, const char * m);
+    QSingleShotTimer(int msec, Qt::TimerType timerType, const QObject *r, QtPrivate::QSlotObjectBase *slotObj);
+
 Q_SIGNALS:
     void timeout();
 protected:
     void timerEvent(QTimerEvent *);
 };
 
-QSingleShotTimer::QSingleShotTimer(int msec, Qt::TimerType timerType, const QObject *receiver, const char *member)
-    : QObject(QAbstractEventDispatcher::instance())
+QSingleShotTimer::QSingleShotTimer(int msec, Qt::TimerType timerType, const QObject *r, const char *member)
+    : QObject(QAbstractEventDispatcher::instance()), hasValidReceiver(true), slotObj(0)
+{
+    timerId = startTimer(msec, timerType);
+    connect(this, SIGNAL(timeout()), r, member);
+}
+
+QSingleShotTimer::QSingleShotTimer(int msec, Qt::TimerType timerType, const QObject *r, QtPrivate::QSlotObjectBase *slotObj)
+    : QObject(QAbstractEventDispatcher::instance()), hasValidReceiver(r), receiver(r), slotObj(slotObj)
 {
-    connect(this, SIGNAL(timeout()), receiver, member);
     timerId = startTimer(msec, timerType);
+    if (r && thread() != r->thread()) {
+        // We need the invocation to happen in the receiver object's thread.
+        // So, move QSingleShotTimer to the correct thread. Before that occurs, we
+        // shall remove the parent from the object.
+        setParent(0);
+        moveToThread(r->thread());
+
+        // Given we're also parentless now, we should take defence against leaks
+        // in case the application quits before we expire.
+        connect(QCoreApplication::instance(), &QCoreApplication::aboutToQuit, this, &QObject::deleteLater);
+    }
 }
 
 QSingleShotTimer::~QSingleShotTimer()
 {
     if (timerId > 0)
         killTimer(timerId);
+    if (slotObj)
+        slotObj->destroyIfLastRef();
 }
 
 void QSingleShotTimer::timerEvent(QTimerEvent *)
@@ -289,7 +305,18 @@ void QSingleShotTimer::timerEvent(QTimerEvent *)
     if (timerId > 0)
         killTimer(timerId);
     timerId = -1;
-    emit timeout();
+
+    if (slotObj) {
+        // If the receiver was destroyed, skip this part
+        if (Q_LIKELY(!receiver.isNull() || !hasValidReceiver)) {
+            // We allocate only the return type - we previously checked the function had
+            // no arguments.
+            void *args[1] = { 0 };
+            slotObj->call(const_cast<QObject*>(receiver.data()), args);
+        }
+    } else {
+        emit timeout();
+    }
 
     // we would like to use delete later here, but it feels like a
     // waste to post a new event to handle this event, so we just unset the flag
@@ -298,6 +325,25 @@ void QSingleShotTimer::timerEvent(QTimerEvent *)
 }
 
 /*!
+    \internal
+
+    Implementation of the template version of singleShot
+
+    \a msec is the timer interval
+    \a timerType is the timer type
+    \a receiver is the receiver object, can be null. In such a case, it will be the same
+                as the final sender class.
+    \a slot a pointer only used when using Qt::UniqueConnection
+    \a slotObj the slot object
+ */
+void QTimer::singleShotImpl(int msec, Qt::TimerType timerType,
+                            const QObject *receiver,
+                            QtPrivate::QSlotObjectBase *slotObj)
+{
+    new QSingleShotTimer(msec, timerType, receiver, slotObj);
+}
+
+/*!
     \reentrant
     This static function calls a slot after a given time interval.
 
@@ -341,6 +387,10 @@ void QTimer::singleShot(int msec, const QObject *receiver, const char *member)
 */
 void QTimer::singleShot(int msec, Qt::TimerType timerType, const QObject *receiver, const char *member)
 {
+    if (Q_UNLIKELY(msec < 0)) {
+        qWarning("QTimer::singleShot: Timers cannot have negative timeouts");
+        return;
+    }
     if (receiver && member) {
         if (msec == 0) {
             // special code shortpath for 0-timers
@@ -357,6 +407,129 @@ void QTimer::singleShot(int msec, Qt::TimerType timerType, const QObject *receiv
     }
 }
 
+/*!\fn void QTimer::singleShot(int msec, const QObject *receiver, PointerToMemberFunction method)
+
+    \since 5.4
+
+    \overload
+    \reentrant
+    This static function calls a member function of a QObject after a given time interval.
+
+    It is very convenient to use this function because you do not need
+    to bother with a \l{QObject::timerEvent()}{timerEvent} or
+    create a local QTimer object.
+
+    The \a receiver is the receiving object and the \a method is the member function. The
+    time interval is \a msec milliseconds.
+
+    If \a receiver is destroyed before the interval occurs, the method will not be called.
+    The function will be run in the thread of \a receiver. The receiver's thread must have
+    a running Qt event loop.
+
+    \sa start()
+*/
+
+/*!\fn void QTimer::singleShot(int msec, Qt::TimerType timerType, const QObject *receiver, PointerToMemberFunction method)
+
+    \since 5.4
+
+    \overload
+    \reentrant
+    This static function calls a member function of a QObject after a given time interval.
+
+    It is very convenient to use this function because you do not need
+    to bother with a \l{QObject::timerEvent()}{timerEvent} or
+    create a local QTimer object.
+
+    The \a receiver is the receiving object and the \a method is the member function. The
+    time interval is \a msec milliseconds. The \a timerType affects the
+    accuracy of the timer.
+
+    If \a receiver is destroyed before the interval occurs, the method will not be called.
+    The function will be run in the thread of \a receiver. The receiver's thread must have
+    a running Qt event loop.
+
+    \sa start()
+*/
+
+/*!\fn void QTimer::singleShot(int msec, Functor functor)
+
+    \since 5.4
+
+    \overload
+    \reentrant
+    This static function calls \a functor after a given time interval.
+
+    It is very convenient to use this function because you do not need
+    to bother with a \l{QObject::timerEvent()}{timerEvent} or
+    create a local QTimer object.
+
+    The time interval is \a msec milliseconds.
+
+    \sa start()
+*/
+
+/*!\fn void QTimer::singleShot(int msec, Qt::TimerType timerType, Functor functor)
+
+    \since 5.4
+
+    \overload
+    \reentrant
+    This static function calls \a functor after a given time interval.
+
+    It is very convenient to use this function because you do not need
+    to bother with a \l{QObject::timerEvent()}{timerEvent} or
+    create a local QTimer object.
+
+    The time interval is \a msec milliseconds. The \a timerType affects the
+    accuracy of the timer.
+
+    \sa start()
+*/
+
+/*!\fn void QTimer::singleShot(int msec, const QObject *context, Functor functor)
+
+    \since 5.4
+
+    \overload
+    \reentrant
+    This static function calls \a functor after a given time interval.
+
+    It is very convenient to use this function because you do not need
+    to bother with a \l{QObject::timerEvent()}{timerEvent} or
+    create a local QTimer object.
+
+    The time interval is \a msec milliseconds.
+
+    If \a context is destroyed before the interval occurs, the method will not be called.
+    The function will be run in the thread of \a context. The context's thread must have
+    a running Qt event loop.
+
+    \sa start()
+*/
+
+/*!\fn void QTimer::singleShot(int msec, Qt::TimerType timerType, const QObject *context, Functor functor)
+
+    \since 5.4
+
+    \overload
+    \reentrant
+    This static function calls \a functor after a given time interval.
+
+    It is very convenient to use this function because you do not need
+    to bother with a \l{QObject::timerEvent()}{timerEvent} or
+    create a local QTimer object.
+
+    The time interval is \a msec milliseconds. The \a timerType affects the
+    accuracy of the timer.
+
+    If \a context is destroyed before the interval occurs, the method will not be called.
+    The function will be run in the thread of \a context. The context's thread must have
+    a running Qt event loop.
+
+    \sa start()
+*/
+
 /*!
     \property QTimer::singleShot
     \brief whether the timer is a single-shot timer
diff --git a/src/corelib/kernel/qtimer.h b/src/corelib/kernel/qtimer.h
index 3484f4dba8..2890f3ef08 100644
--- a/src/corelib/kernel/qtimer.h
+++ b/src/corelib/kernel/qtimer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,6 +73,67 @@ public:
     static void singleShot(int msec, const QObject *receiver, const char *member);
     static void singleShot(int msec, Qt::TimerType timerType, const QObject *receiver, const char *member);
 
+#ifdef Q_QDOC
+    static void singleShot(int msec, const QObject *receiver, PointerToMemberFunction method);
+    static void singleShot(int msec, Qt::TimerType timerType, const QObject *receiver, PointerToMemberFunction method);
+    static void singleShot(int msec, Functor functor);
+    static void singleShot(int msec, Qt::TimerType timerType, Functor functor);
+    static void singleShot(int msec, const QObject *context, Functor functor);
+    static void singleShot(int msec, Qt::TimerType timerType, const QObject *context, Functor functor);
+#else
+    // singleShot to a QObject slot
+    template <typename Func1>
+    static inline void singleShot(int msec, const typename QtPrivate::FunctionPointer<Func1>::Object *receiver, Func1 slot)
+    {
+        singleShot(msec, msec >= 2000 ? Qt::CoarseTimer : Qt::PreciseTimer, receiver, slot);
+    }
+    template <typename Func1>
+    static inline void singleShot(int msec, Qt::TimerType timerType, const typename QtPrivate::FunctionPointer<Func1>::Object *receiver,
+                                  Func1 slot)
+    {
+        typedef QtPrivate::FunctionPointer<Func1> SlotType;
+
+        //compilation error if the slot has arguments.
+        Q_STATIC_ASSERT_X(int(SlotType::ArgumentCount) == 0,
+                          "The slot must not have any arguments.");
+
+        singleShotImpl(msec, timerType, receiver,
+                       new QtPrivate::QSlotObject<Func1, typename SlotType::Arguments, void>(slot));
+    }
+    // singleShot to a functor or function pointer (without context)
+    template <typename Func1>
+    static inline void singleShot(int msec, Func1 slot)
+    {
+        singleShot(msec, msec >= 2000 ? Qt::CoarseTimer : Qt::PreciseTimer, Q_NULLPTR, slot);
+    }
+    template <typename Func1>
+    static inline void singleShot(int msec, Qt::TimerType timerType, Func1 slot)
+    {
+        singleShot(msec, timerType, Q_NULLPTR, slot);
+    }
+    // singleShot to a functor or function pointer (with context)
+    template <typename Func1>
+    static inline typename QtPrivate::QEnableIf<!QtPrivate::FunctionPointer<Func1>::IsPointerToMemberFunction &&
+                                                !QtPrivate::is_same<const char*, Func1>::value, void>::Type
+            singleShot(int msec, QObject *context, Func1 slot)
+    {
+        singleShot(msec, msec >= 2000 ? Qt::CoarseTimer : Qt::PreciseTimer, context, slot);
+    }
+    template <typename Func1>
+    static inline typename QtPrivate::QEnableIf<!QtPrivate::FunctionPointer<Func1>::IsPointerToMemberFunction &&
+                                                !QtPrivate::is_same<const char*, Func1>::value, void>::Type
+            singleShot(int msec, Qt::TimerType timerType, QObject *context, Func1 slot)
+    {
+        //compilation error if the slot has arguments.
+        typedef QtPrivate::FunctionPointer<Func1> SlotType;
+        Q_STATIC_ASSERT_X(int(SlotType::ArgumentCount) <= 0,  "The slot must not have any arguments.");
+
+        singleShotImpl(msec, timerType, context,
+                       new QtPrivate::QFunctorSlotObject<Func1, 0,
+                            typename QtPrivate::List_Left<void, 0>::Value, void>(slot));
+    }
+#endif
+
 public Q_SLOTS:
     void start(int msec);
 
@@ -103,6 +156,9 @@ private:
     inline int startTimer(int){ return -1;}
     inline void killTimer(int){}
 
+    static void singleShotImpl(int msec, Qt::TimerType timerType,
+                               const QObject *receiver, QtPrivate::QSlotObjectBase *slotObj);
+
     int id, inter, del;
     uint single : 1;
     uint nulltimer : 1;
diff --git a/src/corelib/kernel/qtimerinfo_unix.cpp b/src/corelib/kernel/qtimerinfo_unix.cpp
index 3d3c566a8b..43674f2c9c 100644
--- a/src/corelib/kernel/qtimerinfo_unix.cpp
+++ b/src/corelib/kernel/qtimerinfo_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qtimerinfo_unix_p.h b/src/corelib/kernel/qtimerinfo_unix_p.h
index ec7560429b..3afecef28b 100644
--- a/src/corelib/kernel/qtimerinfo_unix_p.h
+++ b/src/corelib/kernel/qtimerinfo_unix_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qtranslator.cpp b/src/corelib/kernel/qtranslator.cpp
index 94c77302dd..d0fa0613b3 100644
--- a/src/corelib/kernel/qtranslator.cpp
+++ b/src/corelib/kernel/qtranslator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qtranslator.h b/src/corelib/kernel/qtranslator.h
index c3957aff3f..e223de91e0 100644
--- a/src/corelib/kernel/qtranslator.h
+++ b/src/corelib/kernel/qtranslator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qtranslator_p.h b/src/corelib/kernel/qtranslator_p.h
index 18c70bfdc5..0cc1430ad4 100644
--- a/src/corelib/kernel/qtranslator_p.h
+++ b/src/corelib/kernel/qtranslator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qvariant.cpp b/src/corelib/kernel/qvariant.cpp
index 5e8f330a92..cea893ba0c 100644
--- a/src/corelib/kernel/qvariant.cpp
+++ b/src/corelib/kernel/qvariant.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,6 +53,7 @@
 #include "qjsonobject.h"
 #include "qjsonarray.h"
 #include "qjsondocument.h"
+#include "qbytearraylist.h"
 #endif
 #include "private/qvariant_p.h"
 #include "qmetatype_p.h"
@@ -2461,9 +2454,8 @@ inline T qNumVariantToHelper(const QVariant::Private &d,
 
     T ret = 0;
     if ((d.type >= QMetaType::User || t >= QMetaType::User)
-        && QMetaType::convert(&val, d.type, &ret, t)) {
+        && QMetaType::convert(constData(d), d.type, &ret, t))
         return ret;
-    }
 
     if (!handlerManager[d.type]->convert(&d, t, &ret, ok) && ok)
         *ok = false;
@@ -2841,6 +2833,7 @@ bool QVariant::canConvert(int targetTypeId) const
     if (targetTypeId == QMetaType::QVariantList
             && (d.type == QMetaType::QVariantList
               || d.type == QMetaType::QStringList
+              || d.type == QMetaType::QByteArrayList
               || QMetaType::hasRegisteredConverterFunction(d.type,
                     qMetaTypeId<QtMetaTypePrivate::QSequentialIterableImpl>()))) {
         return true;
@@ -3197,7 +3190,12 @@ int QVariant::compare(const QVariant &v) const
         }
         if (v1.d.type != v2.d.type) {
             // if conversion fails, default to toString
-            return v1.toString().compare(v2.toString(), Qt::CaseInsensitive);
+            int r = v1.toString().compare(v2.toString(), Qt::CaseInsensitive);
+            if (r == 0) {
+                // cmp(v) returned false, so we should try to agree with it.
+                return (v1.d.type < v2.d.type) ? -1 : 1;
+            }
+            return r;
         }
     }
     if (v1.d.type >= QMetaType::User) {
@@ -3219,7 +3217,12 @@ int QVariant::compare(const QVariant &v) const
     case QVariant::DateTime:
         return v1.toDateTime() < v2.toDateTime() ? -1 : 1;
     }
-    return v1.toString().compare(v2.toString(), Qt::CaseInsensitive);
+    int r = v1.toString().compare(v2.toString(), Qt::CaseInsensitive);
+    if (r == 0) {
+        // cmp(v) returned false, so we should try to agree with it.
+        return (d.type < v.d.type) ? -1 : 1;
+    }
+    return r;
 }
 
 /*!
diff --git a/src/corelib/kernel/qvariant.h b/src/corelib/kernel/qvariant.h
index 5ff33cce5f..2d97cf5a6a 100644
--- a/src/corelib/kernel/qvariant.h
+++ b/src/corelib/kernel/qvariant.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,9 @@
 #include <QtCore/qstring.h>
 #include <QtCore/qstringlist.h>
 #include <QtCore/qobject.h>
+#ifndef QT_BOOTSTRAPPED
+#include <QtCore/qbytearraylist.h>
+#endif
 
 QT_BEGIN_NAMESPACE
 
@@ -713,6 +708,11 @@ namespace QtPrivate {
             if (v.userType() == qMetaTypeId<QStringList>()) {
                 return QSequentialIterable(QtMetaTypePrivate::QSequentialIterableImpl(reinterpret_cast<const QStringList*>(v.constData())));
             }
+#ifndef QT_BOOTSTRAPPED
+            if (v.userType() == qMetaTypeId<QByteArrayList>()) {
+                return QSequentialIterable(QtMetaTypePrivate::QSequentialIterableImpl(reinterpret_cast<const QByteArrayList*>(v.constData())));
+            }
+#endif
             return QSequentialIterable(v.value<QtMetaTypePrivate::QSequentialIterableImpl>());
         }
     };
@@ -735,7 +735,7 @@ namespace QtPrivate {
     {
         static QVariantList invoke(const QVariant &v)
         {
-            if (v.userType() == qMetaTypeId<QStringList>() || QMetaType::hasRegisteredConverterFunction(v.userType(), qMetaTypeId<QtMetaTypePrivate::QSequentialIterableImpl>())) {
+            if (v.userType() == qMetaTypeId<QStringList>() || v.userType() == qMetaTypeId<QByteArrayList>() || QMetaType::hasRegisteredConverterFunction(v.userType(), qMetaTypeId<QtMetaTypePrivate::QSequentialIterableImpl>())) {
                 QSequentialIterable iter = QVariantValueHelperInterface<QSequentialIterable>::invoke(v);
                 QVariantList l;
                 l.reserve(iter.size());
diff --git a/src/corelib/kernel/qvariant_p.h b/src/corelib/kernel/qvariant_p.h
index b523d19187..9b9e266f8e 100644
--- a/src/corelib/kernel/qvariant_p.h
+++ b/src/corelib/kernel/qvariant_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/kernel/qwineventnotifier.cpp b/src/corelib/kernel/qwineventnotifier.cpp
index c694237dc3..0245bf9085 100644
--- a/src/corelib/kernel/qwineventnotifier.cpp
+++ b/src/corelib/kernel/qwineventnotifier.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -140,11 +132,11 @@ QWinEventNotifier::QWinEventNotifier(HANDLE hEvent, QObject *parent)
 {
     Q_D(QWinEventNotifier);
     QAbstractEventDispatcher *eventDispatcher = d->threadData->eventDispatcher.load();
-    if (!eventDispatcher) {
+    if (Q_UNLIKELY(!eventDispatcher)) {
         qWarning("QWinEventNotifier: Can only be used with threads started with QThread");
-    } else {
-        eventDispatcher->registerEventNotifier(this);
+        return;
     }
+    eventDispatcher->registerEventNotifier(this);
     d->enabled = true;
 }
 
@@ -215,6 +207,10 @@ void QWinEventNotifier::setEnabled(bool enable)
     QAbstractEventDispatcher *eventDispatcher = d->threadData->eventDispatcher.load();
     if (!eventDispatcher) // perhaps application is shutting down
         return;
+    if (Q_UNLIKELY(thread() != QThread::currentThread())) {
+        qWarning("QWinEventNotifier: Event notifiers cannot be enabled or disabled from another thread");
+        return;
+    }
 
     if (enable)
         eventDispatcher->registerEventNotifier(this);
diff --git a/src/corelib/kernel/qwineventnotifier.h b/src/corelib/kernel/qwineventnotifier.h
index cddb9d73be..10442f058f 100644
--- a/src/corelib/kernel/qwineventnotifier.h
+++ b/src/corelib/kernel/qwineventnotifier.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimedatabase.cpp b/src/corelib/mimetypes/qmimedatabase.cpp
index a5f5a326d4..9d14e5f90b 100644
--- a/src/corelib/mimetypes/qmimedatabase.cpp
+++ b/src/corelib/mimetypes/qmimedatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimedatabase.h b/src/corelib/mimetypes/qmimedatabase.h
index 17684e49da..25b2c88d56 100644
--- a/src/corelib/mimetypes/qmimedatabase.h
+++ b/src/corelib/mimetypes/qmimedatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimedatabase_p.h b/src/corelib/mimetypes/qmimedatabase_p.h
index d0546cf5ce..21669328db 100644
--- a/src/corelib/mimetypes/qmimedatabase_p.h
+++ b/src/corelib/mimetypes/qmimedatabase_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimeglobpattern.cpp b/src/corelib/mimetypes/qmimeglobpattern.cpp
index 530d3de4a2..6e42a15383 100644
--- a/src/corelib/mimetypes/qmimeglobpattern.cpp
+++ b/src/corelib/mimetypes/qmimeglobpattern.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimeglobpattern_p.h b/src/corelib/mimetypes/qmimeglobpattern_p.h
index 05d701e787..fa5599fb35 100644
--- a/src/corelib/mimetypes/qmimeglobpattern_p.h
+++ b/src/corelib/mimetypes/qmimeglobpattern_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimemagicrule.cpp b/src/corelib/mimetypes/qmimemagicrule.cpp
index b4facb4308..e83a38d82f 100644
--- a/src/corelib/mimetypes/qmimemagicrule.cpp
+++ b/src/corelib/mimetypes/qmimemagicrule.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimemagicrule_p.h b/src/corelib/mimetypes/qmimemagicrule_p.h
index aeed1908a7..7d7ea1e574 100644
--- a/src/corelib/mimetypes/qmimemagicrule_p.h
+++ b/src/corelib/mimetypes/qmimemagicrule_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimemagicrulematcher.cpp b/src/corelib/mimetypes/qmimemagicrulematcher.cpp
index 7c8f957c53..e717ef0746 100644
--- a/src/corelib/mimetypes/qmimemagicrulematcher.cpp
+++ b/src/corelib/mimetypes/qmimemagicrulematcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimemagicrulematcher_p.h b/src/corelib/mimetypes/qmimemagicrulematcher_p.h
index 49de59f55a..25b5d6fee6 100644
--- a/src/corelib/mimetypes/qmimemagicrulematcher_p.h
+++ b/src/corelib/mimetypes/qmimemagicrulematcher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimeprovider.cpp b/src/corelib/mimetypes/qmimeprovider.cpp
index bdea75a3b9..cca9a40b9f 100644
--- a/src/corelib/mimetypes/qmimeprovider.cpp
+++ b/src/corelib/mimetypes/qmimeprovider.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimeprovider_p.h b/src/corelib/mimetypes/qmimeprovider_p.h
index f79373bb0a..027fddd2c8 100644
--- a/src/corelib/mimetypes/qmimeprovider_p.h
+++ b/src/corelib/mimetypes/qmimeprovider_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimetype.cpp b/src/corelib/mimetypes/qmimetype.cpp
index 0ffa186d2e..d1bf27eae0 100644
--- a/src/corelib/mimetypes/qmimetype.cpp
+++ b/src/corelib/mimetypes/qmimetype.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -443,4 +435,17 @@ bool QMimeType::inherits(const QString &mimeTypeName) const
     return QMimeDatabasePrivate::instance()->inherits(d->name, mimeTypeName);
 }
 
+#ifndef QT_NO_DEBUG_STREAM
+QDebug operator<<(QDebug debug, const QMimeType &mime)
+{
+    QDebugStateSaver saver(debug);
+    if (!mime.isValid()) {
+        debug.nospace() << "QMimeType(invalid)";
+    } else {
+        debug.nospace() << "QMimeType(" << mime.name() << ")";
+    }
+    return debug;
+}
+#endif
+
 QT_END_NAMESPACE
diff --git a/src/corelib/mimetypes/qmimetype.h b/src/corelib/mimetypes/qmimetype.h
index 24d043eebc..6dd1a8bc85 100644
--- a/src/corelib/mimetypes/qmimetype.h
+++ b/src/corelib/mimetypes/qmimetype.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -110,5 +102,10 @@ protected:
 
 Q_DECLARE_SHARED(QMimeType)
 
+#ifndef QT_NO_DEBUG_STREAM
+class QDebug;
+Q_CORE_EXPORT QDebug operator<<(QDebug debug, const QMimeType &mime);
+#endif
+
 QT_END_NAMESPACE
 #endif   // QMIMETYPE_H
diff --git a/src/corelib/mimetypes/qmimetype_p.h b/src/corelib/mimetypes/qmimetype_p.h
index 637c85d8ca..e409718e0b 100644
--- a/src/corelib/mimetypes/qmimetype_p.h
+++ b/src/corelib/mimetypes/qmimetype_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimetypeparser.cpp b/src/corelib/mimetypes/qmimetypeparser.cpp
index ef0cb0ec7a..9894098aa4 100644
--- a/src/corelib/mimetypes/qmimetypeparser.cpp
+++ b/src/corelib/mimetypes/qmimetypeparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/mimetypes/qmimetypeparser_p.h b/src/corelib/mimetypes/qmimetypeparser_p.h
index ef7a12cdd5..623dad3789 100644
--- a/src/corelib/mimetypes/qmimetypeparser_p.h
+++ b/src/corelib/mimetypes/qmimetypeparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qelfparser_p.cpp b/src/corelib/plugin/qelfparser_p.cpp
index 040a569721..70614d3f67 100644
--- a/src/corelib/plugin/qelfparser_p.cpp
+++ b/src/corelib/plugin/qelfparser_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qelfparser_p.h b/src/corelib/plugin/qelfparser_p.h
index 1de1402622..1a06b3d0ab 100644
--- a/src/corelib/plugin/qelfparser_p.h
+++ b/src/corelib/plugin/qelfparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qfactoryinterface.h b/src/corelib/plugin/qfactoryinterface.h
index 88fb1bf599..3c041760ae 100644
--- a/src/corelib/plugin/qfactoryinterface.h
+++ b/src/corelib/plugin/qfactoryinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qfactoryloader.cpp b/src/corelib/plugin/qfactoryloader.cpp
index a3e809a266..411d1dfdd5 100644
--- a/src/corelib/plugin/qfactoryloader.cpp
+++ b/src/corelib/plugin/qfactoryloader.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qfactoryloader_p.h b/src/corelib/plugin/qfactoryloader_p.h
index 4a7e262292..2e1195aabb 100644
--- a/src/corelib/plugin/qfactoryloader_p.h
+++ b/src/corelib/plugin/qfactoryloader_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qlibrary.cpp b/src/corelib/plugin/qlibrary.cpp
index 50281b632a..832ee250c7 100644
--- a/src/corelib/plugin/qlibrary.cpp
+++ b/src/corelib/plugin/qlibrary.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -455,7 +447,7 @@ inline QLibraryPrivate *QLibraryStore::findOrCreate(const QString &fileName, con
         lib = new QLibraryPrivate(fileName, version, loadHints);
 
     // track this library
-    if (Q_LIKELY(data))
+    if (Q_LIKELY(data) && !fileName.isEmpty())
         data->libraryMap.insert(fileName, lib);
 
     lib->libraryRefCount.ref();
@@ -475,7 +467,7 @@ inline void QLibraryStore::releaseLibrary(QLibraryPrivate *lib)
     // no one else is using
     Q_ASSERT(lib->libraryUnloadCount.load() == 0);
 
-    if (Q_LIKELY(data)) {
+    if (Q_LIKELY(data) && !lib->fileName.isEmpty()) {
         QLibraryPrivate *that = data->libraryMap.take(lib->fileName);
         Q_ASSERT(lib == that);
         Q_UNUSED(that);
@@ -485,9 +477,9 @@ inline void QLibraryStore::releaseLibrary(QLibraryPrivate *lib)
 
 QLibraryPrivate::QLibraryPrivate(const QString &canonicalFileName, const QString &version, QLibrary::LoadHints loadHints)
     : pHnd(0), fileName(canonicalFileName), fullVersion(version), instance(0),
-      loadHints(loadHints),
       libraryRefCount(0), libraryUnloadCount(0), pluginState(MightBeAPlugin)
 {
+    loadHintsInt.store(loadHints);
     if (canonicalFileName.isEmpty())
         errorString = QLibrary::tr("The shared library was not found.");
 }
@@ -508,7 +500,7 @@ void QLibraryPrivate::mergeLoadHints(QLibrary::LoadHints lh)
     if (pHnd)
         return;
 
-    loadHints = lh;
+    loadHintsInt.store(lh);
 }
 
 QFunctionPointer QLibraryPrivate::resolve(const char *symbol)
@@ -518,6 +510,12 @@ QFunctionPointer QLibraryPrivate::resolve(const char *symbol)
     return resolve_sys(symbol);
 }
 
+void QLibraryPrivate::setLoadHints(QLibrary::LoadHints lh)
+{
+    // this locks a global mutex
+    QMutexLocker lock(&qt_library_mutex);
+    mergeLoadHints(lh);
+}
 
 bool QLibraryPrivate::load()
 {
@@ -898,7 +896,7 @@ QLibrary::~QLibrary()
     suffix (see isLibrary()).
 
     When loading the library, QLibrary searches in all system-specific
-    library locations (e.g. \c LD_LIBRARY_PATH on Unix), unless the
+    library locations (for example, \c LD_LIBRARY_PATH on Unix), unless the
     file name has an absolute path. After loading the library
     successfully, fileName() returns the fully-qualified file name of
     the library, including the full path to the library if one was given
@@ -914,13 +912,12 @@ void QLibrary::setFileName(const QString &fileName)
 {
     QLibrary::LoadHints lh;
     if (d) {
-        lh = d->loadHints;
+        lh = d->loadHints();
         d->release();
         d = 0;
         did_load = false;
     }
-    d = QLibraryPrivate::findOrCreate(fileName);
-    d->loadHints = lh;
+    d = QLibraryPrivate::findOrCreate(fileName, QString(), lh);
 }
 
 QString QLibrary::fileName() const
@@ -943,13 +940,12 @@ void QLibrary::setFileNameAndVersion(const QString &fileName, int verNum)
 {
     QLibrary::LoadHints lh;
     if (d) {
-        lh = d->loadHints;
+        lh = d->loadHints();
         d->release();
         d = 0;
         did_load = false;
     }
-    d = QLibraryPrivate::findOrCreate(fileName, verNum >= 0 ? QString::number(verNum) : QString());
-    d->loadHints = lh;
+    d = QLibraryPrivate::findOrCreate(fileName, verNum >= 0 ? QString::number(verNum) : QString(), lh);
 }
 
 /*!
@@ -965,13 +961,12 @@ void QLibrary::setFileNameAndVersion(const QString &fileName, const QString &ver
 {
     QLibrary::LoadHints lh;
     if (d) {
-        lh = d->loadHints;
+        lh = d->loadHints();
         d->release();
         d = 0;
         did_load = false;
     }
-    d = QLibraryPrivate::findOrCreate(fileName, version);
-    d->loadHints = lh;
+    d = QLibraryPrivate::findOrCreate(fileName, version, lh);
 }
 
 /*!
@@ -1078,7 +1073,7 @@ QString QLibrary::errorString() const
 
     You can give some hints on how the symbols are resolved. Usually,
     the symbols are not resolved at load time, but resolved lazily,
-    (that is, when resolve() is called). If you set the loadHint to
+    (that is, when resolve() is called). If you set the loadHints to
     ResolveAllSymbolsHint, then all symbols will be resolved at load time
     if the platform supports it.
 
@@ -1102,6 +1097,12 @@ QString QLibrary::errorString() const
     By default, none of these flags are set, so libraries will be loaded with
     lazy symbol resolution, and will not export external symbols for resolution
     in other dynamically-loaded libraries.
+
+    \note Setting this property after the library has been loaded has no effect
+    and loadHints() will not reflect those changes.
+
+    \note This property is shared among all QLibrary instances that refer to
+    the same library.
 */
 void QLibrary::setLoadHints(LoadHints hints)
 {
@@ -1109,12 +1110,12 @@ void QLibrary::setLoadHints(LoadHints hints)
         d = QLibraryPrivate::findOrCreate(QString());   // ugly, but we need a d-ptr
         d->errorString.clear();
     }
-    d->loadHints = hints;
+    d->setLoadHints(hints);
 }
 
 QLibrary::LoadHints QLibrary::loadHints() const
 {
-    return d ? d->loadHints : (QLibrary::LoadHints)0;
+    return d ? d->loadHints() : QLibrary::LoadHints();
 }
 
 /* Internal, for debugging */
diff --git a/src/corelib/plugin/qlibrary.h b/src/corelib/plugin/qlibrary.h
index 865bb8c3e3..77fe432761 100644
--- a/src/corelib/plugin/qlibrary.h
+++ b/src/corelib/plugin/qlibrary.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qlibrary_p.h b/src/corelib/plugin/qlibrary_p.h
index e58d18e87b..6c3f600af0 100644
--- a/src/corelib/plugin/qlibrary_p.h
+++ b/src/corelib/plugin/qlibrary_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -94,6 +86,10 @@ public:
     void release();
     QFunctionPointer resolve(const char *);
 
+    QLibrary::LoadHints loadHints() const
+    { return QLibrary::LoadHints(loadHintsInt.load()); }
+    void setLoadHints(QLibrary::LoadHints lh);
+
     static QLibraryPrivate *findOrCreate(const QString &fileName, const QString &version = QString(),
                                          QLibrary::LoadHints loadHints = 0);
     static QStringList suffixes_sys(const QString &fullVersion);
@@ -104,7 +100,6 @@ public:
     QJsonObject metaData;
 
     QString errorString;
-    QLibrary::LoadHints loadHints;
 
     void updatePluginState();
     bool isPlugin();
@@ -126,6 +121,8 @@ private:
     bool unload_sys();
     QFunctionPointer resolve_sys(const char *);
 
+    QAtomicInt loadHintsInt;
+
     /// counts how many QLibrary or QPluginLoader are attached to us, plus 1 if it's loaded
     QAtomicInt libraryRefCount;
     /// counts how many times load() or loadPlugin() were called
diff --git a/src/corelib/plugin/qlibrary_unix.cpp b/src/corelib/plugin/qlibrary_unix.cpp
index 43e2b5c15b..4f96f3bccf 100644
--- a/src/corelib/plugin/qlibrary_unix.cpp
+++ b/src/corelib/plugin/qlibrary_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -162,6 +154,7 @@ bool QLibraryPrivate::load_sys()
         dlFlags |= BIND_DEFERRED;
     }
 #else
+    int loadHints = this->loadHints();
     if (loadHints & QLibrary::ResolveAllSymbolsHint) {
         dlFlags |= RTLD_NOW;
     } else {
diff --git a/src/corelib/plugin/qlibrary_win.cpp b/src/corelib/plugin/qlibrary_win.cpp
index b9494a3041..5292261e5c 100644
--- a/src/corelib/plugin/qlibrary_win.cpp
+++ b/src/corelib/plugin/qlibrary_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qmachparser.cpp b/src/corelib/plugin/qmachparser.cpp
index 5152a92d1d..6b4bf0a475 100644
--- a/src/corelib/plugin/qmachparser.cpp
+++ b/src/corelib/plugin/qmachparser.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qmachparser_p.h b/src/corelib/plugin/qmachparser_p.h
index 6b2774dab6..d200f98345 100644
--- a/src/corelib/plugin/qmachparser_p.h
+++ b/src/corelib/plugin/qmachparser_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qplugin.h b/src/corelib/plugin/qplugin.h
index 1ec9325e5e..4e9a60504a 100644
--- a/src/corelib/plugin/qplugin.h
+++ b/src/corelib/plugin/qplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qpluginloader.cpp b/src/corelib/plugin/qpluginloader.cpp
index 2c139669e6..9441f5bff8 100644
--- a/src/corelib/plugin/qpluginloader.cpp
+++ b/src/corelib/plugin/qpluginloader.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -339,7 +331,7 @@ void QPluginLoader::setFileName(const QString &fileName)
 #if defined(QT_SHARED)
     QLibrary::LoadHints lh;
     if (d) {
-        lh = d->loadHints;
+        lh = d->loadHints();
         d->release();
         d = 0;
         did_load = false;
@@ -405,17 +397,12 @@ void QPluginLoader::setLoadHints(QLibrary::LoadHints loadHints)
         d = QLibraryPrivate::findOrCreate(QString());   // ugly, but we need a d-ptr
         d->errorString.clear();
     }
-    d->loadHints = loadHints;
+    d->setLoadHints(loadHints);
 }
 
 QLibrary::LoadHints QPluginLoader::loadHints() const
 {
-    if (!d) {
-        QPluginLoader *that = const_cast<QPluginLoader *>(this);
-        that->d = QLibraryPrivate::findOrCreate(QString());   // ugly, but we need a d-ptr
-        that->d->errorString.clear();
-    }
-    return d->loadHints;
+    return d ? d->loadHints() : QLibrary::LoadHints();
 }
 
 /*!
diff --git a/src/corelib/plugin/qpluginloader.h b/src/corelib/plugin/qpluginloader.h
index 88c8ba4fa0..3c44dce499 100644
--- a/src/corelib/plugin/qpluginloader.h
+++ b/src/corelib/plugin/qpluginloader.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qsystemlibrary.cpp b/src/corelib/plugin/qsystemlibrary.cpp
index bcd895dd4b..db3e5274aa 100644
--- a/src/corelib/plugin/qsystemlibrary.cpp
+++ b/src/corelib/plugin/qsystemlibrary.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/qsystemlibrary_p.h b/src/corelib/plugin/qsystemlibrary_p.h
index 8b0fd57faf..540e399df5 100644
--- a/src/corelib/plugin/qsystemlibrary_p.h
+++ b/src/corelib/plugin/qsystemlibrary_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/quuid.cpp b/src/corelib/plugin/quuid.cpp
index ac66bd00ce..4a5f4e791d 100644
--- a/src/corelib/plugin/quuid.cpp
+++ b/src/corelib/plugin/quuid.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/plugin/quuid.h b/src/corelib/plugin/quuid.h
index a0d2923bed..add245e4e3 100644
--- a/src/corelib/plugin/quuid.h
+++ b/src/corelib/plugin/quuid.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qabstractstate.cpp b/src/corelib/statemachine/qabstractstate.cpp
index 62b7e448f5..f98674b17a 100644
--- a/src/corelib/statemachine/qabstractstate.cpp
+++ b/src/corelib/statemachine/qabstractstate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -79,8 +71,17 @@ QT_BEGIN_NAMESPACE
   function to perform custom processing when the state is exited.
 */
 
+/*!
+    \property QAbstractState::active
+    \since 5.4
+
+    \brief the active property of this state. A state is active between
+    entered() and exited() signals.
+*/
+
+
 QAbstractStatePrivate::QAbstractStatePrivate(StateType type)
-    : stateType(type), isMachine(false), parentState(0)
+    : stateType(type), isMachine(false), active(false), parentState(0)
 {
 }
 
@@ -121,11 +122,19 @@ void QAbstractStatePrivate::emitEntered()
 {
     Q_Q(QAbstractState);
     emit q->entered(QAbstractState::QPrivateSignal());
+    if (!active) {
+        active = true;
+        emit q->activeChanged(true);
+    }
 }
 
 void QAbstractStatePrivate::emitExited()
 {
     Q_Q(QAbstractState);
+    if (active) {
+        active = false;
+        emit q->activeChanged(false);
+    }
     emit q->exited(QAbstractState::QPrivateSignal());
 }
 
@@ -174,6 +183,17 @@ QStateMachine *QAbstractState::machine() const
 }
 
 /*!
+  Returns whether this state is active.
+
+  \sa activeChanged(bool), entered(), exited()
+*/
+bool QAbstractState::active() const
+{
+    Q_D(const QAbstractState);
+    return d->active;
+}
+
+/*!
   \fn QAbstractState::onExit(QEvent *event)
 
   This function is called when the state is exited. The given \a event is what
@@ -204,6 +224,15 @@ QStateMachine *QAbstractState::machine() const
 */
 
 /*!
+  \fn QAbstractState::activeChanged(bool active)
+  \since 5.4
+
+  This signal is emitted when the active property is changed.
+
+  \sa QAbstractState::active, entered(), exited()
+*/
+
+/*!
   \reimp
 */
 bool QAbstractState::event(QEvent *e)
diff --git a/src/corelib/statemachine/qabstractstate.h b/src/corelib/statemachine/qabstractstate.h
index a6ac248b85..5f2216a9da 100644
--- a/src/corelib/statemachine/qabstractstate.h
+++ b/src/corelib/statemachine/qabstractstate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,12 +48,15 @@ class QAbstractStatePrivate;
 class Q_CORE_EXPORT QAbstractState : public QObject
 {
     Q_OBJECT
+    Q_PROPERTY(bool active READ active NOTIFY activeChanged)
 public:
     ~QAbstractState();
 
     QState *parentState() const;
     QStateMachine *machine() const;
 
+    bool active() const;
+
 Q_SIGNALS:
     void entered(
 #if !defined(Q_QDOC)
@@ -73,6 +68,7 @@ Q_SIGNALS:
       QPrivateSignal
 #endif
     );
+    void activeChanged(bool active);
 
 protected:
     QAbstractState(QState *parent = 0);
diff --git a/src/corelib/statemachine/qabstractstate_p.h b/src/corelib/statemachine/qabstractstate_p.h
index b0334dfbb5..12e56364e8 100644
--- a/src/corelib/statemachine/qabstractstate_p.h
+++ b/src/corelib/statemachine/qabstractstate_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,8 +77,9 @@ public:
     void emitEntered();
     void emitExited();
 
-    uint stateType:31;
+    uint stateType:30;
     uint isMachine:1;
+    bool active:1;
     mutable QState *parentState;
 };
 
diff --git a/src/corelib/statemachine/qabstracttransition.cpp b/src/corelib/statemachine/qabstracttransition.cpp
index 49091de8a8..b8ec0fcbad 100644
--- a/src/corelib/statemachine/qabstracttransition.cpp
+++ b/src/corelib/statemachine/qabstracttransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -201,10 +193,15 @@ QAbstractState *QAbstractTransition::targetState() const
 void QAbstractTransition::setTargetState(QAbstractState* target)
 {
     Q_D(QAbstractTransition);
+    if ((d->targetStates.size() == 1 && target == d->targetStates.at(0).data()) ||
+         (d->targetStates.isEmpty() && target == 0)) {
+        return;
+    }
     if (!target)
         d->targetStates.clear();
     else
         setTargetStates(QList<QAbstractState*>() << target);
+    emit targetStateChanged(QPrivateSignal());
 }
 
 /*!
@@ -229,18 +226,26 @@ QList<QAbstractState*> QAbstractTransition::targetStates() const
 void QAbstractTransition::setTargetStates(const QList<QAbstractState*> &targets)
 {
     Q_D(QAbstractTransition);
-
+    QList<QPointer<QAbstractState> > copy(d->targetStates);
+    bool sameList = true;
     for (int i = 0; i < targets.size(); ++i) {
         QAbstractState *target = targets.at(i);
         if (!target) {
             qWarning("QAbstractTransition::setTargetStates: target state(s) cannot be null");
             return;
+        } else {
+            sameList &= copy.removeOne(target);
         }
     }
 
+    sameList &= copy.isEmpty();
+
     d->targetStates.clear();
     for (int i = 0; i < targets.size(); ++i)
         d->targetStates.append(targets.at(i));
+
+    if (!sameList)
+        emit targetStatesChanged(QPrivateSignal());
 }
 
 /*!
@@ -324,6 +329,24 @@ QList<QAbstractAnimation*> QAbstractTransition::animations() const
 */
 
 /*!
+  \fn QAbstractTransition::targetStateChanged()
+  \since 5.4
+
+  This signal is emitted when the targetState property is changed.
+
+  \sa QAbstractTransition::targetState
+*/
+
+/*!
+  \fn QAbstractTransition::targetStatesChanged()
+  \since 5.4
+
+  This signal is emitted when the targetStates property is changed.
+
+  \sa QAbstractTransition::targetStates
+*/
+
+/*!
   \reimp
 */
 bool QAbstractTransition::event(QEvent *e)
diff --git a/src/corelib/statemachine/qabstracttransition.h b/src/corelib/statemachine/qabstracttransition.h
index a35ad4ca96..2676aba633 100644
--- a/src/corelib/statemachine/qabstracttransition.h
+++ b/src/corelib/statemachine/qabstracttransition.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,8 +57,8 @@ class Q_CORE_EXPORT QAbstractTransition : public QObject
 {
     Q_OBJECT
     Q_PROPERTY(QState* sourceState READ sourceState)
-    Q_PROPERTY(QAbstractState* targetState READ targetState WRITE setTargetState)
-    Q_PROPERTY(QList<QAbstractState*> targetStates READ targetStates WRITE setTargetStates)
+    Q_PROPERTY(QAbstractState* targetState READ targetState WRITE setTargetState NOTIFY targetStateChanged)
+    Q_PROPERTY(QList<QAbstractState*> targetStates READ targetStates WRITE setTargetStates NOTIFY targetStatesChanged)
 public:
     QAbstractTransition(QState *sourceState = 0);
     virtual ~QAbstractTransition();
@@ -91,6 +83,16 @@ Q_SIGNALS:
       QPrivateSignal
 #endif
     );
+    void targetStateChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+    void targetStatesChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
 
 protected:
     virtual bool eventTest(QEvent *event) = 0;
diff --git a/src/corelib/statemachine/qabstracttransition_p.h b/src/corelib/statemachine/qabstracttransition_p.h
index 53e90bf128..d4a61cf53c 100644
--- a/src/corelib/statemachine/qabstracttransition_p.h
+++ b/src/corelib/statemachine/qabstracttransition_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qeventtransition.cpp b/src/corelib/statemachine/qeventtransition.cpp
index 6674c62f69..395400abd9 100644
--- a/src/corelib/statemachine/qeventtransition.cpp
+++ b/src/corelib/statemachine/qeventtransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qeventtransition.h b/src/corelib/statemachine/qeventtransition.h
index f53a5e4732..bf282242d6 100644
--- a/src/corelib/statemachine/qeventtransition.h
+++ b/src/corelib/statemachine/qeventtransition.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qeventtransition_p.h b/src/corelib/statemachine/qeventtransition_p.h
index bde04bb18f..a77153256d 100644
--- a/src/corelib/statemachine/qeventtransition_p.h
+++ b/src/corelib/statemachine/qeventtransition_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qfinalstate.cpp b/src/corelib/statemachine/qfinalstate.cpp
index 3be169ffbb..df8d677724 100644
--- a/src/corelib/statemachine/qfinalstate.cpp
+++ b/src/corelib/statemachine/qfinalstate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qfinalstate.h b/src/corelib/statemachine/qfinalstate.h
index 0343b99c1c..804851c321 100644
--- a/src/corelib/statemachine/qfinalstate.h
+++ b/src/corelib/statemachine/qfinalstate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qhistorystate.cpp b/src/corelib/statemachine/qhistorystate.cpp
index 65ac2a77a0..dc0aba4739 100644
--- a/src/corelib/statemachine/qhistorystate.cpp
+++ b/src/corelib/statemachine/qhistorystate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -181,7 +173,10 @@ void QHistoryState::setDefaultState(QAbstractState *state)
                  "to this history state's group (%p)", state, parentState());
         return;
     }
-    d->defaultState = state;
+    if (d->defaultState != state) {
+        d->defaultState = state;
+        emit defaultStateChanged(QHistoryState::QPrivateSignal());
+    }
 }
 
 /*!
@@ -199,7 +194,10 @@ QHistoryState::HistoryType QHistoryState::historyType() const
 void QHistoryState::setHistoryType(HistoryType type)
 {
     Q_D(QHistoryState);
-    d->historyType = type;
+    if (d->historyType != type) {
+        d->historyType = type;
+        emit historyTypeChanged(QHistoryState::QPrivateSignal());
+    }
 }
 
 /*!
@@ -226,6 +224,24 @@ bool QHistoryState::event(QEvent *e)
     return QAbstractState::event(e);
 }
 
+/*!
+  \fn QHistoryState::defaultStateChanged()
+  \since 5.4
+
+  This signal is emitted when the defaultState property is changed.
+
+  \sa QHistoryState::defaultState
+*/
+
+/*!
+  \fn QHistoryState::historyTypeChanged()
+  \since 5.4
+
+  This signal is emitted when the historyType property is changed.
+
+  \sa QHistoryState::historyType
+*/
+
 QT_END_NAMESPACE
 
 #endif //QT_NO_STATEMACHINE
diff --git a/src/corelib/statemachine/qhistorystate.h b/src/corelib/statemachine/qhistorystate.h
index 62278ac47a..d05e4ba5eb 100644
--- a/src/corelib/statemachine/qhistorystate.h
+++ b/src/corelib/statemachine/qhistorystate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,8 +45,8 @@ class QHistoryStatePrivate;
 class Q_CORE_EXPORT QHistoryState : public QAbstractState
 {
     Q_OBJECT
-    Q_PROPERTY(QAbstractState* defaultState READ defaultState WRITE setDefaultState)
-    Q_PROPERTY(HistoryType historyType READ historyType WRITE setHistoryType)
+    Q_PROPERTY(QAbstractState* defaultState READ defaultState WRITE setDefaultState NOTIFY defaultStateChanged)
+    Q_PROPERTY(HistoryType historyType READ historyType WRITE setHistoryType NOTIFY historyTypeChanged)
     Q_ENUMS(HistoryType)
 public:
     enum HistoryType {
@@ -72,6 +64,18 @@ public:
     HistoryType historyType() const;
     void setHistoryType(HistoryType type);
 
+Q_SIGNALS:
+    void defaultStateChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+    void historyTypeChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+
 protected:
     void onEntry(QEvent *event);
     void onExit(QEvent *event);
diff --git a/src/corelib/statemachine/qhistorystate_p.h b/src/corelib/statemachine/qhistorystate_p.h
index 1c0af91790..3271102d16 100644
--- a/src/corelib/statemachine/qhistorystate_p.h
+++ b/src/corelib/statemachine/qhistorystate_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qsignaleventgenerator_p.h b/src/corelib/statemachine/qsignaleventgenerator_p.h
index 160a24e7a3..1697c4b95d 100644
--- a/src/corelib/statemachine/qsignaleventgenerator_p.h
+++ b/src/corelib/statemachine/qsignaleventgenerator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qsignaltransition.cpp b/src/corelib/statemachine/qsignaltransition.cpp
index f1f4786bcc..0f447db979 100644
--- a/src/corelib/statemachine/qsignaltransition.cpp
+++ b/src/corelib/statemachine/qsignaltransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -185,6 +177,7 @@ void QSignalTransition::setSenderObject(const QObject *sender)
     d->unregister();
     d->sender = sender;
     d->maybeRegister();
+    emit senderObjectChanged(QPrivateSignal());
 }
 
 /*!
@@ -207,6 +200,7 @@ void QSignalTransition::setSignal(const QByteArray &signal)
     d->unregister();
     d->signal = signal;
     d->maybeRegister();
+    emit signalChanged(QPrivateSignal());
 }
 
 /*!
@@ -245,6 +239,24 @@ bool QSignalTransition::event(QEvent *e)
     return QAbstractTransition::event(e);
 }
 
+/*!
+  \fn QSignalTransition::senderObjectChanged()
+  \since 5.4
+
+  This signal is emitted when the senderObject property is changed.
+
+  \sa QSignalTransition::senderObject
+*/
+
+/*!
+  \fn QSignalTransition::signalChanged()
+  \since 5.4
+
+  This signal is emitted when the signal property is changed.
+
+  \sa QSignalTransition::signal
+*/
+
 void QSignalTransitionPrivate::callOnTransition(QEvent *e)
 {
     Q_Q(QSignalTransition);
@@ -260,6 +272,7 @@ void QSignalTransitionPrivate::callOnTransition(QEvent *e)
     }
 }
 
+
 QT_END_NAMESPACE
 
 #endif //QT_NO_STATEMACHINE
diff --git a/src/corelib/statemachine/qsignaltransition.h b/src/corelib/statemachine/qsignaltransition.h
index 12f021d78e..545374eb5c 100644
--- a/src/corelib/statemachine/qsignaltransition.h
+++ b/src/corelib/statemachine/qsignaltransition.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,8 +45,9 @@ class QSignalTransitionPrivate;
 class Q_CORE_EXPORT QSignalTransition : public QAbstractTransition
 {
     Q_OBJECT
-    Q_PROPERTY(QObject* senderObject READ senderObject WRITE setSenderObject)
-    Q_PROPERTY(QByteArray signal READ signal WRITE setSignal)
+    Q_PROPERTY(QObject* senderObject READ senderObject WRITE setSenderObject NOTIFY senderObjectChanged)
+    Q_PROPERTY(QByteArray signal READ signal WRITE setSignal NOTIFY signalChanged)
+
 public:
     QSignalTransition(QState *sourceState = 0);
     QSignalTransition(const QObject *sender, const char *signal,
@@ -73,6 +66,18 @@ protected:
 
     bool event(QEvent *e);
 
+Q_SIGNALS:
+    void senderObjectChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+    void signalChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+
 private:
     Q_DISABLE_COPY(QSignalTransition)
     Q_DECLARE_PRIVATE(QSignalTransition)
diff --git a/src/corelib/statemachine/qsignaltransition_p.h b/src/corelib/statemachine/qsignaltransition_p.h
index dc7eebee65..1d09babe88 100644
--- a/src/corelib/statemachine/qsignaltransition_p.h
+++ b/src/corelib/statemachine/qsignaltransition_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qstate.cpp b/src/corelib/statemachine/qstate.cpp
index f3b4c5f235..29698d204f 100644
--- a/src/corelib/statemachine/qstate.cpp
+++ b/src/corelib/statemachine/qstate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -309,7 +301,10 @@ void QState::setErrorState(QAbstractState *state)
         return;
     }
 
-    d->errorState = state;
+    if (d->errorState != state) {
+        d->errorState = state;
+        emit errorStateChanged(QState::QPrivateSignal());
+    }
 }
 
 /*!
@@ -491,7 +486,10 @@ void QState::setInitialState(QAbstractState *state)
                  state, this);
         return;
     }
-    d->initialState = state;
+    if (d->initialState != state) {
+        d->initialState = state;
+        emit initialStateChanged(QState::QPrivateSignal());
+    }
 }
 
 /*!
@@ -509,7 +507,10 @@ QState::ChildMode QState::childMode() const
 void QState::setChildMode(ChildMode mode)
 {
     Q_D(QState);
-    d->childMode = mode;
+    if (d->childMode != mode) {
+        d->childMode = mode;
+        emit childModeChanged(QState::QPrivateSignal());
+    }
 }
 
 /*!
@@ -549,6 +550,33 @@ bool QState::event(QEvent *e)
   \sa QState::assignProperty(), QAbstractTransition::addAnimation()
 */
 
+/*!
+  \fn QState::childModeChanged()
+  \since 5.4
+
+  This signal is emitted when the childMode property is changed.
+
+  \sa QState::childMode
+*/
+
+/*!
+  \fn QState::initialStateChanged()
+  \since 5.4
+
+  This signal is emitted when the initialState property is changed.
+
+  \sa QState::initialState
+*/
+
+/*!
+  \fn QState::errorStateChanged()
+  \since 5.4
+
+  This signal is emitted when the errorState property is changed.
+
+  \sa QState::errorState
+*/
+
 QT_END_NAMESPACE
 
 #endif //QT_NO_STATEMACHINE
diff --git a/src/corelib/statemachine/qstate.h b/src/corelib/statemachine/qstate.h
index a5f2509ffb..dbc1ca97f9 100644
--- a/src/corelib/statemachine/qstate.h
+++ b/src/corelib/statemachine/qstate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,9 +50,9 @@ class QStatePrivate;
 class Q_CORE_EXPORT QState : public QAbstractState
 {
     Q_OBJECT
-    Q_PROPERTY(QAbstractState* initialState READ initialState WRITE setInitialState)
-    Q_PROPERTY(QAbstractState* errorState READ errorState WRITE setErrorState)
-    Q_PROPERTY(ChildMode childMode READ childMode WRITE setChildMode)
+    Q_PROPERTY(QAbstractState* initialState READ initialState WRITE setInitialState NOTIFY initialStateChanged)
+    Q_PROPERTY(QAbstractState* errorState READ errorState WRITE setErrorState NOTIFY errorStateChanged)
+    Q_PROPERTY(ChildMode childMode READ childMode WRITE setChildMode NOTIFY childModeChanged)
     Q_ENUMS(ChildMode RestorePolicy)
 public:
     enum ChildMode {
@@ -108,6 +100,21 @@ Q_SIGNALS:
       QPrivateSignal
 #endif
     );
+    void childModeChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+    void initialStateChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
+    void errorStateChanged(
+#if !defined(Q_QDOC)
+      QPrivateSignal
+#endif
+    );
 
 protected:
     void onEntry(QEvent *event);
diff --git a/src/corelib/statemachine/qstate_p.h b/src/corelib/statemachine/qstate_p.h
index eff6d6f6e9..dd563803ff 100644
--- a/src/corelib/statemachine/qstate_p.h
+++ b/src/corelib/statemachine/qstate_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/statemachine/qstatemachine.cpp b/src/corelib/statemachine/qstatemachine.cpp
index a79f9d30d2..1350c8d99e 100644
--- a/src/corelib/statemachine/qstatemachine.cpp
+++ b/src/corelib/statemachine/qstatemachine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -163,6 +155,13 @@ QT_BEGIN_NAMESPACE
     QState::DontRestoreProperties.
 */
 
+/*!
+    \property QStateMachine::running
+    \since 5.4
+
+    \brief the running state of this state machine
+*/
+
 #ifndef QT_NO_ANIMATION
 /*!
     \property QStateMachine::animated
@@ -1358,6 +1357,11 @@ void QStateMachinePrivate::_q_start()
 {
     Q_Q(QStateMachine);
     Q_ASSERT(state == Starting);
+    foreach (QAbstractState *state, configuration) {
+        QAbstractStatePrivate *abstractStatePrivate = QAbstractStatePrivate::get(state);
+        abstractStatePrivate->active = false;
+        emit state->activeChanged(false);
+    }
     configuration.clear();
     qDeleteAll(internalEventQueue);
     internalEventQueue.clear();
@@ -1405,6 +1409,7 @@ void QStateMachinePrivate::_q_start()
 #endif
 
     emit q->started(QStateMachine::QPrivateSignal());
+    emit q->runningChanged(true);
 
     if (stopProcessingReason == Finished) {
         // The state machine immediately reached a final state.
@@ -1412,6 +1417,7 @@ void QStateMachinePrivate::_q_start()
         state = NotRunning;
         unregisterAllTransitions();
         emitFinished();
+        emit q->runningChanged(false);
     } else {
         _q_process();
     }
@@ -1494,12 +1500,14 @@ void QStateMachinePrivate::_q_process()
         cancelAllDelayedEvents();
         unregisterAllTransitions();
         emitFinished();
+        emit q->runningChanged(false);
         break;
     case Stopped:
         state = NotRunning;
         cancelAllDelayedEvents();
         unregisterAllTransitions();
         emit q->stopped(QStateMachine::QPrivateSignal());
+        emit q->runningChanged(false);
         break;
     }
 }
@@ -2113,7 +2121,7 @@ bool QStateMachine::isRunning() const
   the main application event loop started with QCoreApplication::exec() or
   QApplication::exec().
 
-  \sa started(), finished(), stop(), initialState()
+  \sa started(), finished(), stop(), initialState(), setRunning()
 */
 void QStateMachine::start()
 {
@@ -2141,7 +2149,7 @@ void QStateMachine::start()
   Stops this state machine. The state machine will stop processing events and
   then emit the stopped() signal.
 
-  \sa stopped(), start()
+  \sa stopped(), start(), setRunning()
 */
 void QStateMachine::stop()
 {
@@ -2161,6 +2169,19 @@ void QStateMachine::stop()
 }
 
 /*!
+    Convenience functions to start/stop this state machine.
+
+    \sa start(), stop(), started(), finished(), stopped()
+*/
+void QStateMachine::setRunning(bool running)
+{
+    if (running)
+        start();
+    else
+        stop();
+}
+
+/*!
   \threadsafe
 
   Posts the given \a event of the given \a priority for processing by this
@@ -2708,6 +2729,15 @@ QStateMachine::WrappedEvent::~WrappedEvent()
   Returns a clone of the original event.
 */
 
+/*!
+  \fn QStateMachine::runningChanged(bool running)
+  \since 5.4
+
+  This signal is emitted when the running property is changed.
+
+  \sa QStateMachine::running
+*/
+
 QT_END_NAMESPACE
 
 #include "qstatemachine.moc"
diff --git a/src/corelib/statemachine/qstatemachine.h b/src/corelib/statemachine/qstatemachine.h
index 9305676bb5..5f203d5ed4 100644
--- a/src/corelib/statemachine/qstatemachine.h
+++ b/src/corelib/statemachine/qstatemachine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,6 +54,7 @@ class Q_CORE_EXPORT QStateMachine : public QState
     Q_OBJECT
     Q_PROPERTY(QString errorString READ errorString)
     Q_PROPERTY(QState::RestorePolicy globalRestorePolicy READ globalRestorePolicy WRITE setGlobalRestorePolicy)
+    Q_PROPERTY(bool running READ isRunning WRITE setRunning NOTIFY runningChanged)
 #ifndef QT_NO_ANIMATION
     Q_PROPERTY(bool animated READ isAnimated WRITE setAnimated)
 #endif
@@ -149,6 +142,7 @@ public:
 public Q_SLOTS:
     void start();
     void stop();
+    void setRunning(bool running);
 
 Q_SIGNALS:
     void started(
@@ -161,6 +155,8 @@ Q_SIGNALS:
       QPrivateSignal
 #endif
     );
+    void runningChanged(bool running);
+
 
 protected:
     void onEntry(QEvent *event);
diff --git a/src/corelib/statemachine/qstatemachine_p.h b/src/corelib/statemachine/qstatemachine_p.h
index a661d105cf..465d8aff0d 100644
--- a/src/corelib/statemachine/qstatemachine_p.h
+++ b/src/corelib/statemachine/qstatemachine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qatomic.cpp b/src/corelib/thread/qatomic.cpp
index b2043a45a1..2ac32d5d6b 100644
--- a/src/corelib/thread/qatomic.cpp
+++ b/src/corelib/thread/qatomic.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qatomic.h b/src/corelib/thread/qatomic.h
index 1faaa22d0f..7526cfe0e6 100644
--- a/src/corelib/thread/qatomic.h
+++ b/src/corelib/thread/qatomic.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qbasicatomic.h b/src/corelib/thread/qbasicatomic.h
index 0fe4d20bc5..09500e92d7 100644
--- a/src/corelib/thread/qbasicatomic.h
+++ b/src/corelib/thread/qbasicatomic.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qexception.cpp b/src/corelib/thread/qexception.cpp
index 0c17399d33..5808c38a71 100644
--- a/src/corelib/thread/qexception.cpp
+++ b/src/corelib/thread/qexception.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qexception.h b/src/corelib/thread/qexception.h
index accf0fc7b4..6c48b94a88 100644
--- a/src/corelib/thread/qexception.h
+++ b/src/corelib/thread/qexception.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfuture.h b/src/corelib/thread/qfuture.h
index 8071e80d1b..9c6e504419 100644
--- a/src/corelib/thread/qfuture.h
+++ b/src/corelib/thread/qfuture.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfuture.qdoc b/src/corelib/thread/qfuture.qdoc
index 6b3a635291..92f21fc512 100644
--- a/src/corelib/thread/qfuture.qdoc
+++ b/src/corelib/thread/qfuture.qdoc
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfutureinterface.cpp b/src/corelib/thread/qfutureinterface.cpp
index ee3d113196..1f417d3d74 100644
--- a/src/corelib/thread/qfutureinterface.cpp
+++ b/src/corelib/thread/qfutureinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,7 +40,6 @@
 
 #include <QtCore/qatomic.h>
 #include <QtCore/qthread.h>
-#include <QtCore/qthreadpool.h>
 #include <private/qthreadpool_p.h>
 
 QT_BEGIN_NAMESPACE
@@ -195,7 +186,7 @@ void QFutureInterfaceBase::waitForResume()
         return;
 
     // decrease active thread count since this thread will wait.
-    const ThreadPoolThreadReleaser releaser(QThreadPool::globalInstance());
+    const ThreadPoolThreadReleaser releaser(d->pool());
 
     d->pausedWaitCondition.wait(&d->m_mutex);
 }
@@ -301,7 +292,7 @@ void QFutureInterfaceBase::waitForResult(int resultIndex)
 
     // To avoid deadlocks and reduce the number of threads used, try to
     // run the runnable in the current thread.
-    QThreadPool::globalInstance()->d_func()->stealRunnable(d->runnable);
+    d->pool()->d_func()->stealRunnable(d->runnable);
 
     lock.relock();
 
@@ -322,7 +313,7 @@ void QFutureInterfaceBase::waitForFinished()
     lock.unlock();
 
     if (!alreadyFinished) {
-        QThreadPool::globalInstance()->d_func()->stealRunnable(d->runnable);
+        d->pool()->d_func()->stealRunnable(d->runnable);
 
         lock.relock();
 
@@ -364,6 +355,11 @@ void QFutureInterfaceBase::setRunnable(QRunnable *runnable)
     d->runnable = runnable;
 }
 
+void QFutureInterfaceBase::setThreadPool(QThreadPool *pool)
+{
+    d->m_pool = pool;
+}
+
 void QFutureInterfaceBase::setFilterMode(bool enable)
 {
     QMutexLocker locker(&d->m_mutex);
@@ -444,7 +440,7 @@ bool QFutureInterfaceBase::derefT() const
 QFutureInterfaceBasePrivate::QFutureInterfaceBasePrivate(QFutureInterfaceBase::State initialState)
     : refCount(1), m_progressValue(0), m_progressMinimum(0), m_progressMaximum(0),
       state(initialState),
-      manualProgress(false), m_expectedResultCount(0), runnable(0)
+      manualProgress(false), m_expectedResultCount(0), runnable(0), m_pool(0)
 {
     progressTime.invalidate();
 }
diff --git a/src/corelib/thread/qfutureinterface.h b/src/corelib/thread/qfutureinterface.h
index e0a59697a1..b6f1c18b16 100644
--- a/src/corelib/thread/qfutureinterface.h
+++ b/src/corelib/thread/qfutureinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,6 +46,7 @@ QT_BEGIN_NAMESPACE
 
 
 template <typename T> class QFuture;
+class QThreadPool;
 class QFutureInterfaceBasePrivate;
 class QFutureWatcherBase;
 class QFutureWatcherBasePrivate;
@@ -85,6 +78,7 @@ public:
     void reportResultsReady(int beginIndex, int endIndex);
 
     void setRunnable(QRunnable *runnable);
+    void setThreadPool(QThreadPool *pool);
     void setFilterMode(bool enable);
     void setProgressRange(int minimum, int maximum);
     int progressMinimum() const;
diff --git a/src/corelib/thread/qfutureinterface_p.h b/src/corelib/thread/qfutureinterface_p.h
index 8b38ebfc66..be64152d0e 100644
--- a/src/corelib/thread/qfutureinterface_p.h
+++ b/src/corelib/thread/qfutureinterface_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,6 +50,7 @@
 #include <QtCore/qlist.h>
 #include <QtCore/qwaitcondition.h>
 #include <QtCore/qrunnable.h>
+#include <QtCore/qthreadpool.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -169,6 +162,10 @@ public:
     QtPrivate::ExceptionStore m_exceptionStore;
     QString m_progressText;
     QRunnable *runnable;
+    QThreadPool *m_pool;
+
+    inline QThreadPool *pool() const
+    { return m_pool ? m_pool : QThreadPool::globalInstance(); }
 
     // Internal functions that does not change the mutex state.
     // The mutex must be locked when calling these.
diff --git a/src/corelib/thread/qfuturesynchronizer.h b/src/corelib/thread/qfuturesynchronizer.h
index 39dbfc52a8..2bde6ae78c 100644
--- a/src/corelib/thread/qfuturesynchronizer.h
+++ b/src/corelib/thread/qfuturesynchronizer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfuturesynchronizer.qdoc b/src/corelib/thread/qfuturesynchronizer.qdoc
index 0112935a00..05da81ddff 100644
--- a/src/corelib/thread/qfuturesynchronizer.qdoc
+++ b/src/corelib/thread/qfuturesynchronizer.qdoc
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfuturewatcher.cpp b/src/corelib/thread/qfuturewatcher.cpp
index c986d4e59f..1f92f3177e 100644
--- a/src/corelib/thread/qfuturewatcher.cpp
+++ b/src/corelib/thread/qfuturewatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfuturewatcher.h b/src/corelib/thread/qfuturewatcher.h
index c78ed7a83b..3ea4c4df4f 100644
--- a/src/corelib/thread/qfuturewatcher.h
+++ b/src/corelib/thread/qfuturewatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qfuturewatcher_p.h b/src/corelib/thread/qfuturewatcher_p.h
index aa9802b2e8..226642119a 100644
--- a/src/corelib/thread/qfuturewatcher_p.h
+++ b/src/corelib/thread/qfuturewatcher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qgenericatomic.h b/src/corelib/thread/qgenericatomic.h
index aeed199c97..8c8cc6f657 100644
--- a/src/corelib/thread/qgenericatomic.h
+++ b/src/corelib/thread/qgenericatomic.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -294,9 +286,9 @@ template <typename BaseClass> struct QGenericAtomicOps
     T fetchAndAndRelaxed(T &_q_value, typename QtPrivate::QEnableIf<QTypeInfo<T>::isIntegral, T>::Type operand) Q_DECL_NOTHROW
     {
         // implement fetchAndAnd on top of testAndSet
+        T tmp = BaseClass::load(_q_value);
         Q_FOREVER {
-            T tmp = BaseClass::load(_q_value);
-            if (BaseClass::testAndSetRelaxed(_q_value, tmp, T(tmp & operand)))
+            if (BaseClass::testAndSetRelaxed(_q_value, tmp, T(tmp & operand), &tmp))
                 return tmp;
         }
     }
@@ -327,9 +319,9 @@ template <typename BaseClass> struct QGenericAtomicOps
     T fetchAndOrRelaxed(T &_q_value, typename QtPrivate::QEnableIf<QTypeInfo<T>::isIntegral, T>::Type operand) Q_DECL_NOTHROW
     {
         // implement fetchAndOr on top of testAndSet
+        T tmp = BaseClass::load(_q_value);
         Q_FOREVER {
-            T tmp = BaseClass::load(_q_value);
-            if (BaseClass::testAndSetRelaxed(_q_value, tmp, T(tmp | operand)))
+            if (BaseClass::testAndSetRelaxed(_q_value, tmp, T(tmp | operand), &tmp))
                 return tmp;
         }
     }
@@ -360,9 +352,9 @@ template <typename BaseClass> struct QGenericAtomicOps
     T fetchAndXorRelaxed(T &_q_value, typename QtPrivate::QEnableIf<QTypeInfo<T>::isIntegral, T>::Type operand) Q_DECL_NOTHROW
     {
         // implement fetchAndXor on top of testAndSet
+        T tmp = BaseClass::load(_q_value);
         Q_FOREVER {
-            T tmp = BaseClass::load(_q_value);
-            if (BaseClass::testAndSetRelaxed(_q_value, tmp, T(tmp ^ operand)))
+            if (BaseClass::testAndSetRelaxed(_q_value, tmp, T(tmp ^ operand), &tmp))
                 return tmp;
         }
     }
diff --git a/src/corelib/thread/qmutex.cpp b/src/corelib/thread/qmutex.cpp
index 5e3f3a1cab..b38b39ffca 100644
--- a/src/corelib/thread/qmutex.cpp
+++ b/src/corelib/thread/qmutex.cpp
@@ -1,42 +1,34 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation
 ** Copyright (C) 2012 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutex.h b/src/corelib/thread/qmutex.h
index 011555f904..626ba0b1bb 100644
--- a/src/corelib/thread/qmutex.h
+++ b/src/corelib/thread/qmutex.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutex_linux.cpp b/src/corelib/thread/qmutex_linux.cpp
index 18aedfbf75..ddce47f68e 100644
--- a/src/corelib/thread/qmutex_linux.cpp
+++ b/src/corelib/thread/qmutex_linux.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutex_mac.cpp b/src/corelib/thread/qmutex_mac.cpp
index 998a3bd141..329a471df1 100644
--- a/src/corelib/thread/qmutex_mac.cpp
+++ b/src/corelib/thread/qmutex_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutex_p.h b/src/corelib/thread/qmutex_p.h
index dcaaed4cab..afc1588437 100644
--- a/src/corelib/thread/qmutex_p.h
+++ b/src/corelib/thread/qmutex_p.h
@@ -1,42 +1,34 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation
 ** Copyright (C) 2012 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutex_unix.cpp b/src/corelib/thread/qmutex_unix.cpp
index 2f8c2e1dc8..de94d2b4c8 100644
--- a/src/corelib/thread/qmutex_unix.cpp
+++ b/src/corelib/thread/qmutex_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutex_win.cpp b/src/corelib/thread/qmutex_win.cpp
index a8cdf85fb6..eb8cda5b45 100644
--- a/src/corelib/thread/qmutex_win.cpp
+++ b/src/corelib/thread/qmutex_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutexpool.cpp b/src/corelib/thread/qmutexpool.cpp
index 9baf3d15f7..0cca725f79 100644
--- a/src/corelib/thread/qmutexpool.cpp
+++ b/src/corelib/thread/qmutexpool.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qmutexpool_p.h b/src/corelib/thread/qmutexpool_p.h
index 99af432636..829c325ee5 100644
--- a/src/corelib/thread/qmutexpool_p.h
+++ b/src/corelib/thread/qmutexpool_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qorderedmutexlocker_p.h b/src/corelib/thread/qorderedmutexlocker_p.h
index 0492886cfd..27ce8f97ad 100644
--- a/src/corelib/thread/qorderedmutexlocker_p.h
+++ b/src/corelib/thread/qorderedmutexlocker_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qreadwritelock.cpp b/src/corelib/thread/qreadwritelock.cpp
index ffda3c4fad..3527bc03b9 100644
--- a/src/corelib/thread/qreadwritelock.cpp
+++ b/src/corelib/thread/qreadwritelock.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qreadwritelock.h b/src/corelib/thread/qreadwritelock.h
index 6815878ec5..4260d090b6 100644
--- a/src/corelib/thread/qreadwritelock.h
+++ b/src/corelib/thread/qreadwritelock.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qreadwritelock_p.h b/src/corelib/thread/qreadwritelock_p.h
index 49668ee46a..ca85f9be96 100644
--- a/src/corelib/thread/qreadwritelock_p.h
+++ b/src/corelib/thread/qreadwritelock_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qresultstore.cpp b/src/corelib/thread/qresultstore.cpp
index 65c2437064..e2f16663d0 100644
--- a/src/corelib/thread/qresultstore.cpp
+++ b/src/corelib/thread/qresultstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qresultstore.h b/src/corelib/thread/qresultstore.h
index 11ce23936d..f9182634c8 100644
--- a/src/corelib/thread/qresultstore.h
+++ b/src/corelib/thread/qresultstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qrunnable.cpp b/src/corelib/thread/qrunnable.cpp
index c12307ab71..75c9106a61 100644
--- a/src/corelib/thread/qrunnable.cpp
+++ b/src/corelib/thread/qrunnable.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qrunnable.h b/src/corelib/thread/qrunnable.h
index a6cc095258..15c3efc58f 100644
--- a/src/corelib/thread/qrunnable.h
+++ b/src/corelib/thread/qrunnable.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qsemaphore.cpp b/src/corelib/thread/qsemaphore.cpp
index 9393ca0d59..72681ff4d6 100644
--- a/src/corelib/thread/qsemaphore.cpp
+++ b/src/corelib/thread/qsemaphore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qsemaphore.h b/src/corelib/thread/qsemaphore.h
index 40200151b0..779f6c1c15 100644
--- a/src/corelib/thread/qsemaphore.h
+++ b/src/corelib/thread/qsemaphore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthread.cpp b/src/corelib/thread/qthread.cpp
index adad4b81a1..3caad7c4b2 100644
--- a/src/corelib/thread/qthread.cpp
+++ b/src/corelib/thread/qthread.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -221,7 +213,7 @@ QThreadPrivate::~QThreadPrivate()
     \note Care must be taken when interacting with objects across different
     threads. See \l{Synchronizing Threads} for details.
 
-    \section1 Managing threads
+    \section1 Managing Threads
 
     QThread will notifiy you via a signal when the thread is
     started() and finished(), or you can use isFinished() and
diff --git a/src/corelib/thread/qthread.h b/src/corelib/thread/qthread.h
index f06981c0bd..1d32580670 100644
--- a/src/corelib/thread/qthread.h
+++ b/src/corelib/thread/qthread.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthread_p.h b/src/corelib/thread/qthread_p.h
index e2951b125f..83693921be 100644
--- a/src/corelib/thread/qthread_p.h
+++ b/src/corelib/thread/qthread_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,11 +57,6 @@
 
 #include <algorithm>
 
-
-#ifdef Q_OS_WINRT
-#include <thread>
-#endif
-
 QT_BEGIN_NAMESPACE
 
 class QAbstractEventDispatcher;
@@ -138,6 +125,10 @@ private:
 
 #ifndef QT_NO_THREAD
 
+#ifdef Q_OS_WINRT
+namespace ABI { namespace Windows { namespace Foundation { struct IAsyncAction; } } }
+#endif
+
 class QThreadPrivate : public QObjectPrivate
 {
     Q_DECLARE_PUBLIC(QThread)
@@ -174,19 +165,23 @@ public:
 #endif // Q_OS_UNIX
 
 #ifdef Q_OS_WIN
+#  ifndef Q_OS_WINRT
     static unsigned int __stdcall start(void *);
     static void finish(void *, bool lockAnyway=true);
+#  else
+    HRESULT start(ABI::Windows::Foundation::IAsyncAction *);
+    void finish(bool lockAnyway = true);
+#  endif
 
 #  ifndef Q_OS_WINRT
     Qt::HANDLE handle;
-    unsigned int id;
 #  else
-    std::thread *handle;
-    std::thread::id id;
+    ABI::Windows::Foundation::IAsyncAction *handle;
 #  endif
+    unsigned int id;
     int waiters;
     bool terminationEnabled, terminatePending;
-# endif
+#endif // Q_OS_WIN
     QThreadData *data;
 
     static void createEventDispatcher(QThreadData *data);
diff --git a/src/corelib/thread/qthread_unix.cpp b/src/corelib/thread/qthread_unix.cpp
index b838cb4b28..5df50311ef 100644
--- a/src/corelib/thread/qthread_unix.cpp
+++ b/src/corelib/thread/qthread_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthread_win.cpp b/src/corelib/thread/qthread_win.cpp
index bdc3463b9f..b179d3ccf2 100644
--- a/src/corelib/thread/qthread_win.cpp
+++ b/src/corelib/thread/qthread_win.cpp
@@ -1,46 +1,38 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 //#define WINVER 0x0500
-#if (_WIN32_WINNT < 0x0400) && !defined(Q_OS_WINRT)
+#if (_WIN32_WINNT < 0x0400)
 #define _WIN32_WINNT 0x0400
 #endif
 
@@ -54,19 +46,10 @@
 #include <qpointer.h>
 
 #include <private/qcoreapplication_p.h>
-#ifdef Q_OS_WINRT
-#include <private/qeventdispatcher_winrt_p.h>
-#else
 #include <private/qeventdispatcher_win_p.h>
-#endif
 
 #include <qt_windows.h>
 
-#ifdef Q_OS_WINRT
-#include <qelapsedtimer.h>
-#include <thread>
-#endif
-
 #ifndef Q_OS_WINCE
 #ifndef _MT
 #define _MT
@@ -79,7 +62,6 @@
 #ifndef QT_NO_THREAD
 QT_BEGIN_NAMESPACE
 
-#ifndef Q_OS_WINRT
 void qt_watch_adopted_thread(const HANDLE adoptedThreadHandle, QThread *qthread);
 DWORD WINAPI qt_adopted_thread_watcher_function(LPVOID);
 
@@ -101,38 +83,6 @@ static void qt_free_tls()
     }
 }
 Q_DESTRUCTOR_FUNCTION(qt_free_tls)
-#else // !Q_OS_WINRT
-
-__declspec(thread) static QThreadData* qt_current_thread_data_tls_index = 0;
-void qt_create_tls()
-{
-}
-
-static void qt_free_tls()
-{
-    if (qt_current_thread_data_tls_index) {
-        qt_current_thread_data_tls_index->deref();
-        qt_current_thread_data_tls_index = 0;
-    }
-}
-
-QThreadData* TlsGetValue(QThreadData*& tls)
-{
-    Q_ASSERT(tls == qt_current_thread_data_tls_index);
-    return tls;
-}
-
-void TlsSetValue(QThreadData*& tls, QThreadData* data)
-{
-    Q_ASSERT(tls == qt_current_thread_data_tls_index);
-    if (tls)
-        tls->deref();
-    tls = data;
-    if (tls)
-        tls->ref();
-}
-Q_DESTRUCTOR_FUNCTION(qt_free_tls)
-#endif // Q_OS_WINRT
 
 /*
     QThreadData
@@ -165,7 +115,6 @@ QThreadData *QThreadData::current(bool createIfNecessary)
 
         if (!QCoreApplicationPrivate::theMainThread) {
             QCoreApplicationPrivate::theMainThread = threadData->thread;
-#ifndef Q_OS_WINRT
             // TODO: is there a way to reflect the branch's behavior using
             // WinRT API?
         } else {
@@ -182,7 +131,6 @@ QThreadData *QThreadData::current(bool createIfNecessary)
                         realHandle = reinterpret_cast<HANDLE>(GetCurrentThreadId());
 #endif
             qt_watch_adopted_thread(realHandle, threadData->thread);
-#endif // !Q_OS_WINRT
         }
     }
     return threadData;
@@ -190,16 +138,10 @@ QThreadData *QThreadData::current(bool createIfNecessary)
 
 void QAdoptedThread::init()
 {
-#ifndef Q_OS_WINRT
     d_func()->handle = GetCurrentThread();
     d_func()->id = GetCurrentThreadId();
-#else
-    d_func()->handle = nullptr;
-    d_func()->id = std::this_thread::get_id();
-#endif
 }
 
-#ifndef Q_OS_WINRT
 static QVector<HANDLE> qt_adopted_thread_handles;
 static QVector<QThread *> qt_adopted_qthreads;
 static QMutex qt_adopted_thread_watcher_mutex;
@@ -352,7 +294,6 @@ void qt_set_thread_name(HANDLE threadId, LPCSTR threadName)
     }
 }
 #endif // !QT_NO_DEBUG && Q_CC_MSVC && !Q_OS_WINCE
-#endif // !Q_OS_WINRT
 
 /**************************************************************************
  ** QThreadPrivate
@@ -362,11 +303,7 @@ void qt_set_thread_name(HANDLE threadId, LPCSTR threadName)
 
 void QThreadPrivate::createEventDispatcher(QThreadData *data)
 {
-#ifdef Q_OS_WINRT
-    QEventDispatcherWinRT *theEventDispatcher = new QEventDispatcherWinRT;
-#else
     QEventDispatcherWin32 *theEventDispatcher = new QEventDispatcherWin32;
-#endif
     data->eventDispatcher.storeRelease(theEventDispatcher);
     theEventDispatcher->startingUp();
 }
@@ -394,7 +331,7 @@ unsigned int __stdcall QT_ENSURE_STACK_ALIGNED_FOR_SSE QThreadPrivate::start(voi
     else
         createEventDispatcher(data);
 
-#if !defined(QT_NO_DEBUG) && defined(Q_CC_MSVC) && !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
+#if !defined(QT_NO_DEBUG) && defined(Q_CC_MSVC) && !defined(Q_OS_WINCE)
     // sets the name of the current thread.
     QByteArray objectName = thr->objectName().toLocal8Bit();
     qt_set_thread_name((HANDLE)-1,
@@ -440,21 +377,11 @@ void QThreadPrivate::finish(void *arg, bool lockAnyway)
     d->interruptionRequested = false;
 
     if (!d->waiters) {
-#ifndef Q_OS_WINRT
         CloseHandle(d->handle);
-#else
-        d->handle->detach();
-        delete d->handle;
-#endif
         d->handle = 0;
     }
 
-#ifndef Q_OS_WINRT
     d->id = 0;
-#else
-    d->id = std::thread::id();
-#endif
-
 }
 
 /**************************************************************************
@@ -469,15 +396,10 @@ Qt::HANDLE QThread::currentThreadId() Q_DECL_NOTHROW
 int QThread::idealThreadCount() Q_DECL_NOTHROW
 {
     SYSTEM_INFO sysinfo;
-#ifndef Q_OS_WINRT
     GetSystemInfo(&sysinfo);
-#else
-    GetNativeSystemInfo(&sysinfo);
-#endif
     return sysinfo.dwNumberOfProcessors;
 }
 
-#ifndef Q_OS_WINRT
 void QThread::yieldCurrentThread()
 {
 #ifndef Q_OS_WINCE
@@ -501,28 +423,6 @@ void QThread::usleep(unsigned long usecs)
 {
     ::Sleep((usecs / 1000) + 1);
 }
-#else // !Q_OS_WINRT
-
-void QThread::yieldCurrentThread()
-{
-    msleep(1);
-}
-
-void QThread::sleep(unsigned long secs)
-{
-    msleep(secs * 1000);
-}
-
-void QThread::msleep(unsigned long msecs)
-{
-    WaitForSingleObjectEx(GetCurrentThread(), msecs, FALSE);
-}
-
-void QThread::usleep(unsigned long usecs)
-{
-    msleep((usecs / 1000) + 1);
-}
-#endif // Q_OS_WINRT
 
 void QThread::start(Priority priority)
 {
@@ -544,7 +444,6 @@ void QThread::start(Priority priority)
     d->returnCode = 0;
     d->interruptionRequested = false;
 
-#ifndef Q_OS_WINRT
     /*
       NOTE: we create the thread in the suspended state, set the
       priority and then resume the thread.
@@ -609,23 +508,6 @@ void QThread::start(Priority priority)
     if (ResumeThread(d->handle) == (DWORD) -1) {
         qErrnoWarning("QThread::start: Failed to resume new thread");
     }
-#else // !Q_OS_WINRT
-    d->handle = new std::thread(QThreadPrivate::start, this);
-
-    if (!d->handle) {
-        qErrnoWarning(errno, "QThread::start: Failed to create thread");
-        d->running = false;
-        d->finished = true;
-        return;
-    }
-
-    d->id = d->handle->get_id();
-
-    if (priority != NormalPriority || priority != InheritPriority) {
-        qWarning("QThread::start: Failed to set thread priority (not implemented)");
-        d->priority = NormalPriority;
-    }
-#endif // Q_OS_WINRT
 }
 
 void QThread::terminate()
@@ -639,11 +521,7 @@ void QThread::terminate()
         return;
     }
 
-#ifndef Q_OS_WINRT
     TerminateThread(d->handle, 0);
-#else // !Q_OS_WINRT
-    qWarning("QThread::terminate: Terminate is not supported on WinRT");
-#endif // Q_OS_WINRT
     QThreadPrivate::finish(this, false);
 }
 
@@ -652,11 +530,7 @@ bool QThread::wait(unsigned long time)
     Q_D(QThread);
     QMutexLocker locker(&d->mutex);
 
-#ifndef Q_OS_WINRT
     if (d->id == GetCurrentThreadId()) {
-#else
-    if (d->id == std::this_thread::get_id()) {
-#endif
         qWarning("QThread::wait: Thread tried to wait on itself");
         return false;
     }
@@ -667,7 +541,6 @@ bool QThread::wait(unsigned long time)
     locker.mutex()->unlock();
 
     bool ret = false;
-#ifndef Q_OS_WINRT
     switch (WaitForSingleObject(d->handle, time)) {
     case WAIT_OBJECT_0:
         ret = true;
@@ -680,14 +553,6 @@ bool QThread::wait(unsigned long time)
     default:
         break;
     }
-#else // !Q_OS_WINRT
-    if (!d->finished) {
-        QElapsedTimer timer;
-        timer.start();
-        while (timer.elapsed() < time && !d->finished)
-            yieldCurrentThread();
-    }
-#endif // Q_OS_WINRT
 
     locker.mutex()->lock();
     --d->waiters;
@@ -699,12 +564,7 @@ bool QThread::wait(unsigned long time)
     }
 
     if (d->finished && !d->waiters) {
-#ifndef Q_OS_WINRT
         CloseHandle(d->handle);
-#else
-        d->handle->detach();
-        delete d->handle;
-#endif
         d->handle = 0;
     }
 
@@ -722,16 +582,13 @@ void QThread::setTerminationEnabled(bool enabled)
     if (enabled && d->terminatePending) {
         QThreadPrivate::finish(thr, false);
         locker.unlock(); // don't leave the mutex locked!
-#ifndef Q_OS_WINRT
         _endthreadex(0);
-#endif
     }
 }
 
 // Caller must hold the mutex
 void QThreadPrivate::setPriority(QThread::Priority threadPriority)
 {
-#ifndef Q_OS_WINRT
     // copied from start() with a few modifications:
 
     int prio;
@@ -774,12 +631,6 @@ void QThreadPrivate::setPriority(QThread::Priority threadPriority)
     if (!SetThreadPriority(handle, prio)) {
         qErrnoWarning("QThread::setPriority: Failed to set thread priority");
     }
-#else // !Q_OS_WINRT
-    if (priority != threadPriority) {
-        qWarning("QThread::setPriority: Failed to set thread priority (not implemented)");
-        return;
-    }
-#endif // Q_OS_WINRT
 }
 
 QT_END_NAMESPACE
diff --git a/src/corelib/thread/qthread_winrt.cpp b/src/corelib/thread/qthread_winrt.cpp
new file mode 100644
index 0000000000..b6c89bd2a4
--- /dev/null
+++ b/src/corelib/thread/qthread_winrt.cpp
@@ -0,0 +1,450 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qthread.h"
+#include "qthread_p.h"
+#include "qthreadstorage.h"
+
+#include <QtCore/QElapsedTimer>
+#include <QtCore/QUuid>
+#include <QtCore/qt_windows.h>
+#include <QtCore/qfunctions_winrt.h>
+#include <QtCore/private/qcoreapplication_p.h>
+#include <QtCore/private/qeventdispatcher_winrt_p.h>
+
+#include <wrl.h>
+#include <windows.system.threading.h>
+#include <windows.system.threading.core.h>
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::System::Threading;
+using namespace ABI::Windows::System::Threading::Core;
+
+#ifndef QT_NO_THREAD
+QT_BEGIN_NAMESPACE
+
+static WorkItemPriority nativePriority(QThread::Priority priority)
+{
+    switch (priority) {
+    default:
+    case QThread::NormalPriority:
+        return WorkItemPriority_Normal;
+    case QThread::IdlePriority:
+    case QThread::LowestPriority:
+    case QThread::LowPriority:
+        return WorkItemPriority_Low;
+    case QThread::HighPriority:
+    case QThread::HighestPriority:
+    case QThread::TimeCriticalPriority:
+        return WorkItemPriority_High;
+    }
+}
+
+class QWinRTThreadGlobal
+{
+public:
+    QWinRTThreadGlobal()
+    {
+        HRESULT hr;
+
+        hr = RoGetActivationFactory(
+                    HString::MakeReference(RuntimeClass_Windows_System_Threading_Core_PreallocatedWorkItem).Get(),
+                    IID_PPV_ARGS(&workItemFactory));
+        Q_ASSERT_SUCCEEDED(hr);
+
+        hr = RoGetActivationFactory(
+                    HString::MakeReference(RuntimeClass_Windows_System_Threading_Core_SignalNotifier).Get(),
+                    IID_PPV_ARGS(&notifierFactory));
+        Q_ASSERT_SUCCEEDED(hr);
+
+        QString eventName = QUuid::createUuid().toString();
+        dispatchEvent = CreateEventEx(NULL, reinterpret_cast<LPCWSTR>(eventName.utf16()), 0, EVENT_ALL_ACCESS);
+
+        hr = notifierFactory->AttachToEvent(
+                 HStringReference(reinterpret_cast<LPCWSTR>(eventName.utf16())).Get(),
+                 Callback<ISignalHandler>(this, &QWinRTThreadGlobal::dispatch).Get(), &notifier);
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = notifier->Enable();
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+
+    ~QWinRTThreadGlobal()
+    {
+        CloseHandle(dispatchEvent);
+    }
+
+    void dispatch()
+    {
+        SetEvent(dispatchEvent);
+    }
+
+    void push(QThreadPrivate *d)
+    {
+        threads.append(d);
+    }
+
+private:
+    HRESULT dispatch(ISignalNotifier *notifier, boolean timedOut)
+    {
+        Q_UNUSED(timedOut);
+        notifier->Enable();
+        if (threads.isEmpty())
+            return S_OK;
+
+        QThreadPrivate *thread = threads.takeFirst();
+        ComPtr<IPreallocatedWorkItem> workItem;
+        HRESULT hr = workItemFactory->CreateWorkItemWithPriority(
+                    Callback<IWorkItemHandler>(thread, &QThreadPrivate::start).Get(),
+                    nativePriority(thread->priority), &workItem);
+        if (FAILED(hr)) {
+            qErrnoWarning(hr, "Failed to create thread work item");
+            thread->finish();
+            return hr;
+        }
+
+        hr = workItem->RunAsync(&thread->handle);
+        if (FAILED(hr)) {
+            qErrnoWarning(hr, "Failed to run work item");
+            thread->finish();
+            return hr;
+        }
+
+        return S_OK;
+    }
+
+    HANDLE dispatchEvent;
+    ComPtr<ISignalNotifier> notifier;
+    ComPtr<ISignalNotifierStatics> notifierFactory;
+    ComPtr<IPreallocatedWorkItemFactory> workItemFactory;
+
+    QList<QThreadPrivate *> threads;
+};
+Q_GLOBAL_STATIC(QWinRTThreadGlobal, g)
+
+/**************************************************************************
+ ** QThreadData
+ *************************************************************************/
+
+__declspec(thread) static QThreadData *qt_current_thread_data = 0;
+
+void QThreadData::clearCurrentThreadData()
+{
+    qt_current_thread_data = 0;
+}
+
+QThreadData *QThreadData::current(bool createIfNecessary)
+{
+    static bool winmainThread = true;
+    QThreadData *threadData = qt_current_thread_data;
+    if (!threadData && createIfNecessary) {
+        threadData = new QThreadData;
+        // This needs to be called prior to new AdoptedThread() to
+        // avoid recursion.
+        qt_current_thread_data = threadData;
+        QT_TRY {
+            threadData->thread = new QAdoptedThread(threadData);
+        } QT_CATCH(...) {
+            qt_current_thread_data = 0;
+            threadData->deref();
+            threadData = 0;
+            QT_RETHROW;
+        }
+        threadData->deref();
+        threadData->isAdopted = true;
+        threadData->threadId = reinterpret_cast<Qt::HANDLE>(GetCurrentThreadId());
+
+        if (!QCoreApplicationPrivate::theMainThread && !winmainThread)
+            QCoreApplicationPrivate::theMainThread = threadData->thread;
+
+        if (winmainThread) {
+            g->dispatch();
+            threadData->thread->d_func()->createEventDispatcher(threadData);
+            winmainThread = false;
+        }
+    }
+
+    return threadData;
+}
+
+void QAdoptedThread::init()
+{
+    Q_D(QThread);
+
+    d->handle = Q_NULLPTR;
+    d->id = 0;
+}
+
+/**************************************************************************
+ ** QThreadPrivate
+ *************************************************************************/
+
+#endif // QT_NO_THREAD
+
+void QThreadPrivate::createEventDispatcher(QThreadData *data)
+{
+    QEventDispatcherWinRT *eventDispatcher = new QEventDispatcherWinRT;
+    data->eventDispatcher.storeRelease(eventDispatcher);
+    eventDispatcher->startingUp();
+}
+
+#ifndef QT_NO_THREAD
+
+HRESULT QThreadPrivate::start(IAsyncAction *)
+{
+    Q_Q(QThread);
+
+    qt_current_thread_data = data;
+    id = GetCurrentThreadId();
+    data->threadId = reinterpret_cast<Qt::HANDLE>(id);
+    QThread::setTerminationEnabled(false);
+
+    {
+        QMutexLocker locker(&mutex);
+        data->quitNow = exited;
+    }
+
+    if (data->eventDispatcher.load())
+        data->eventDispatcher.load()->startingUp();
+    else
+        createEventDispatcher(data);
+
+    running = true;
+    emit q->started(QThread::QPrivateSignal());
+
+    QThread::setTerminationEnabled(true);
+
+    q->run();
+
+    finish();
+
+    return S_OK;
+}
+
+void QThreadPrivate::finish(bool lockAnyway)
+{
+    Q_Q(QThread);
+
+    QMutexLocker locker(lockAnyway ? &mutex : 0);
+    isInFinish = true;
+    priority = QThread::InheritPriority;
+    void **tls_data = reinterpret_cast<void **>(&data->tls);
+    locker.unlock();
+    emit q->finished(QThread::QPrivateSignal());
+    QCoreApplication::sendPostedEvents(0, QEvent::DeferredDelete);
+    QThreadStorageData::finish(tls_data);
+    locker.relock();
+
+    QAbstractEventDispatcher *eventDispatcher = data->eventDispatcher.load();
+    if (eventDispatcher) {
+        data->eventDispatcher = 0;
+        locker.unlock();
+        eventDispatcher->closingDown();
+        delete eventDispatcher;
+        locker.relock();
+    }
+
+    running = false;
+    finished = true;
+    isInFinish = false;
+    interruptionRequested = false;
+
+    if (!waiters) {
+        if (handle)
+            handle->Release();
+        handle = Q_NULLPTR;
+    }
+
+    id = 0;
+}
+
+/**************************************************************************
+ ** QThread
+ *************************************************************************/
+
+Qt::HANDLE QThread::currentThreadId() Q_DECL_NOTHROW
+{
+    return reinterpret_cast<Qt::HANDLE>(GetCurrentThreadId());
+}
+
+int QThread::idealThreadCount() Q_DECL_NOTHROW
+{
+    SYSTEM_INFO sysinfo;
+    GetNativeSystemInfo(&sysinfo);
+    return sysinfo.dwNumberOfProcessors;
+}
+
+void QThread::yieldCurrentThread()
+{
+    msleep(1);
+}
+
+void QThread::sleep(unsigned long secs)
+{
+    msleep(secs * 1000);
+}
+
+void QThread::msleep(unsigned long msecs)
+{
+    WaitForSingleObjectEx(GetCurrentThread(), msecs, FALSE);
+}
+
+void QThread::usleep(unsigned long usecs)
+{
+    msleep((usecs / 1000) + 1);
+}
+
+void QThread::start(Priority priority)
+{
+    Q_D(QThread);
+    QMutexLocker locker(&d->mutex);
+
+    if (d->isInFinish) {
+        locker.unlock();
+        wait();
+        locker.relock();
+    }
+
+    if (d->running)
+        return;
+
+    d->finished = false;
+    d->exited = false;
+    d->returnCode = 0;
+    d->interruptionRequested = false;
+    d->priority = priority == QThread::InheritPriority ? currentThread()->priority() : priority;
+    g->push(d);
+    g->dispatch();
+
+    locker.unlock();
+    while (!d->running && !d->finished) {
+        QAbstractEventDispatcher *eventDispatcher = QThread::currentThread()->eventDispatcher();
+        if (eventDispatcher)
+            eventDispatcher->processEvents(QEventLoop::AllEvents);
+        else
+            yieldCurrentThread();
+    }
+}
+
+void QThread::terminate()
+{
+    Q_D(QThread);
+    QMutexLocker locker(&d->mutex);
+    if (!d->running)
+        return;
+    if (!d->terminationEnabled) {
+        d->terminatePending = true;
+        return;
+    }
+
+    if (d->handle) {
+        ComPtr<IAsyncInfo> info;
+        HRESULT hr = d->handle->QueryInterface(IID_PPV_ARGS(&info));
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = info->Cancel();
+        if (FAILED(hr))
+            qErrnoWarning(hr, "Failed to cancel thread action");
+    }
+
+    d->finish(false);
+}
+
+bool QThread::wait(unsigned long time)
+{
+    Q_D(QThread);
+    QMutexLocker locker(&d->mutex);
+
+    if (d->id == GetCurrentThreadId()) {
+        qWarning("QThread::wait: Thread tried to wait on itself");
+        return false;
+    }
+    if (d->finished || !d->running)
+        return true;
+
+    ++d->waiters;
+    locker.mutex()->unlock();
+
+    // Alternatively, we could check the handle
+    bool ret = false;
+    if (!d->finished) {
+        QElapsedTimer timer;
+        timer.start();
+        while (timer.elapsed() < time && !d->finished)
+            yieldCurrentThread();
+
+        ret = d->finished;
+    }
+
+    locker.mutex()->lock();
+    --d->waiters;
+
+    if (ret && !d->finished) {
+        // thread was terminated by someone else
+
+        d->finish(false);
+    }
+
+    if (d->finished && !d->waiters) {
+        if (d->handle)
+            d->handle->Release();
+        d->handle = Q_NULLPTR;
+    }
+
+    return ret;
+}
+
+void QThread::setTerminationEnabled(bool enabled)
+{
+    QThread *thr = currentThread();
+    Q_ASSERT_X(thr != 0, "QThread::setTerminationEnabled()",
+               "Current thread was not started with QThread.");
+    QThreadPrivate *d = thr->d_func();
+    QMutexLocker locker(&d->mutex);
+    d->terminationEnabled = enabled;
+    if (enabled && d->terminatePending) {
+        d->finish(false);
+        locker.unlock(); // don't leave the mutex locked!
+    }
+}
+
+// Caller must hold the mutex
+void QThreadPrivate::setPriority(QThread::Priority threadPriority)
+{
+    if (running)
+        qWarning("WinRT threads can't change priority while running.");
+
+    priority = threadPriority;
+}
+
+QT_END_NAMESPACE
+#endif // QT_NO_THREAD
diff --git a/src/corelib/thread/qthreadpool.cpp b/src/corelib/thread/qthreadpool.cpp
index 269f561a91..c2a8bb0595 100644
--- a/src/corelib/thread/qthreadpool.cpp
+++ b/src/corelib/thread/qthreadpool.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthreadpool.h b/src/corelib/thread/qthreadpool.h
index 22a42c2272..e4d23cc200 100644
--- a/src/corelib/thread/qthreadpool.h
+++ b/src/corelib/thread/qthreadpool.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthreadpool_p.h b/src/corelib/thread/qthreadpool_p.h
index bd5f546fdb..d4308266a2 100644
--- a/src/corelib/thread/qthreadpool_p.h
+++ b/src/corelib/thread/qthreadpool_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthreadstorage.cpp b/src/corelib/thread/qthreadstorage.cpp
index 2d95b0880d..5eb404208f 100644
--- a/src/corelib/thread/qthreadstorage.cpp
+++ b/src/corelib/thread/qthreadstorage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qthreadstorage.h b/src/corelib/thread/qthreadstorage.h
index 86285de84f..351ff90aa4 100644
--- a/src/corelib/thread/qthreadstorage.h
+++ b/src/corelib/thread/qthreadstorage.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qwaitcondition.h b/src/corelib/thread/qwaitcondition.h
index ce073c21e9..aaac066a19 100644
--- a/src/corelib/thread/qwaitcondition.h
+++ b/src/corelib/thread/qwaitcondition.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qwaitcondition_unix.cpp b/src/corelib/thread/qwaitcondition_unix.cpp
index e8322959ca..3bcf3202a1 100644
--- a/src/corelib/thread/qwaitcondition_unix.cpp
+++ b/src/corelib/thread/qwaitcondition_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/qwaitcondition_win.cpp b/src/corelib/thread/qwaitcondition_win.cpp
index f09667a364..a1a23119e6 100644
--- a/src/corelib/thread/qwaitcondition_win.cpp
+++ b/src/corelib/thread/qwaitcondition_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/thread/thread.pri b/src/corelib/thread/thread.pri
index 3c1ddd984a..2e027c8e21 100644
--- a/src/corelib/thread/thread.pri
+++ b/src/corelib/thread/thread.pri
@@ -50,6 +50,11 @@ win32:SOURCES += thread/qmutex_win.cpp \
                  thread/qthread_win.cpp \
 		 thread/qwaitcondition_win.cpp
 
+winrt {
+    SOURCES -= thread/qthread_win.cpp
+    SOURCES += thread/qthread_winrt.cpp
+}
+
 integrity:SOURCES += thread/qmutex_unix.cpp \
                 thread/qthread_unix.cpp \
 		thread/qwaitcondition_unix.cpp
diff --git a/src/corelib/tools/qalgorithms.h b/src/corelib/tools/qalgorithms.h
index f75f33f25c..0ba3cad5e9 100644
--- a/src/corelib/tools/qalgorithms.h
+++ b/src/corelib/tools/qalgorithms.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qalgorithms.qdoc b/src/corelib/tools/qalgorithms.qdoc
index 2551233aec..5e5a2b42e2 100644
--- a/src/corelib/tools/qalgorithms.qdoc
+++ b/src/corelib/tools/qalgorithms.qdoc
@@ -144,7 +144,7 @@
 
     QList and QVector's non-const iterator types are random access iterators.
 
-    \section1 Qt and the STL algorithms
+    \section1 Qt and the STL Algorithms
 
     Historically, Qt used to provide functions which were direct equivalents of
     many STL algorithmic functions. Starting with Qt 5.0, you are instead
diff --git a/src/corelib/tools/qarraydata.cpp b/src/corelib/tools/qarraydata.cpp
index 12736d5c2e..98c484c1dd 100644
--- a/src/corelib/tools/qarraydata.cpp
+++ b/src/corelib/tools/qarraydata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,7 +60,7 @@ static const QArrayData &qt_array_empty = qt_array[0];
 static const QArrayData &qt_array_unsharable_empty = qt_array[1];
 
 QArrayData *QArrayData::allocate(size_t objectSize, size_t alignment,
-        size_t capacity, AllocationOptions options)
+        size_t capacity, AllocationOptions options) Q_DECL_NOTHROW
 {
     // Alignment is a power of two
     Q_ASSERT(alignment >= Q_ALIGNOF(QArrayData)
@@ -114,7 +106,7 @@ QArrayData *QArrayData::allocate(size_t objectSize, size_t alignment,
 }
 
 void QArrayData::deallocate(QArrayData *data, size_t objectSize,
-        size_t alignment)
+        size_t alignment) Q_DECL_NOTHROW
 {
     // Alignment is a power of two
     Q_ASSERT(alignment >= Q_ALIGNOF(QArrayData)
@@ -130,4 +122,33 @@ void QArrayData::deallocate(QArrayData *data, size_t objectSize,
     ::free(data);
 }
 
+namespace QtPrivate {
+/*!
+  \internal
+*/
+QContainerImplHelper::CutResult QContainerImplHelper::mid(int originalLength, int *_position, int *_length)
+{
+    int &position = *_position;
+    int &length = *_length;
+    if (position > originalLength)
+        return Null;
+
+    if (position < 0) {
+        if (length < 0 || length + position >= originalLength)
+            return Full;
+        if (length + position <= 0)
+            return Null;
+        length += position;
+        position = 0;
+    } else if (uint(length) > uint(originalLength - position)) {
+        length = originalLength - position;
+    }
+
+    if (position == 0 && length == originalLength)
+        return Full;
+
+    return length > 0 ? Subset : Empty;
+}
+}
+
 QT_END_NAMESPACE
diff --git a/src/corelib/tools/qarraydata.h b/src/corelib/tools/qarraydata.h
index 10a9e35542..2119b3d4ac 100644
--- a/src/corelib/tools/qarraydata.h
+++ b/src/corelib/tools/qarraydata.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -101,10 +93,6 @@ struct Q_CORE_EXPORT QArrayData
     AllocationOptions detachFlags() const
     {
         AllocationOptions result;
-#if QT_SUPPORTS(UNSHARABLE_CONTAINERS)
-        if (!ref.isSharable())
-            result |= Unsharable;
-#endif
         if (capacityReserved)
             result |= CapacityReserved;
         return result;
@@ -120,9 +108,9 @@ struct Q_CORE_EXPORT QArrayData
 
     static QArrayData *allocate(size_t objectSize, size_t alignment,
             size_t capacity, AllocationOptions options = Default)
-        Q_REQUIRED_RESULT;
+        Q_DECL_NOTHROW Q_REQUIRED_RESULT;
     static void deallocate(QArrayData *data, size_t objectSize,
-            size_t alignment);
+            size_t alignment) Q_DECL_NOTHROW;
 
     static const QArrayData shared_null[2];
     static QArrayData *sharedNull() { return const_cast<QArrayData*>(shared_null); }
@@ -361,6 +349,14 @@ namespace QtPrivate {
     QT_PREPEND_NAMESPACE(QtPrivate::qMakeArrayLiteral)<Type>( Array )
 #endif // !defined(Q_ARRAY_LITERAL)
 
+namespace QtPrivate {
+struct Q_CORE_EXPORT QContainerImplHelper
+{
+    enum CutResult { Null, Empty, Full, Subset };
+    static CutResult mid(int originalLength, int *position, int *length);
+};
+}
+
 QT_END_NAMESPACE
 
 #endif // include guard
diff --git a/src/corelib/tools/qarraydataops.h b/src/corelib/tools/qarraydataops.h
index b94c6b50ea..36279ee147 100644
--- a/src/corelib/tools/qarraydataops.h
+++ b/src/corelib/tools/qarraydataops.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,6 +49,7 @@ struct QPodArrayOps
 {
     void appendInitialize(size_t newSize)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(newSize > uint(this->size));
         Q_ASSERT(newSize <= this->alloc);
@@ -67,6 +60,7 @@ struct QPodArrayOps
 
     void copyAppend(const T *b, const T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(b < e);
         Q_ASSERT(size_t(e - b) <= this->alloc - uint(this->size));
@@ -77,6 +71,7 @@ struct QPodArrayOps
 
     void copyAppend(size_t n, const T &t)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(n <= this->alloc - uint(this->size));
 
@@ -89,6 +84,7 @@ struct QPodArrayOps
 
     void truncate(size_t newSize)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(newSize < size_t(this->size));
 
@@ -97,6 +93,7 @@ struct QPodArrayOps
 
     void destroyAll() // Call from destructors, ONLY!
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(this->ref.atomic.load() == 0);
 
         // As this is to be called only from destructor, it doesn't need to be
@@ -105,6 +102,7 @@ struct QPodArrayOps
 
     void insert(T *where, const T *b, const T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(where >= this->begin() && where < this->end()); // Use copyAppend at end
         Q_ASSERT(b < e);
@@ -118,6 +116,7 @@ struct QPodArrayOps
 
     void erase(T *b, T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(b < e);
         Q_ASSERT(b >= this->begin() && b < this->end());
         Q_ASSERT(e > this->begin() && e < this->end());
@@ -133,6 +132,7 @@ struct QGenericArrayOps
 {
     void appendInitialize(size_t newSize)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(newSize > uint(this->size));
         Q_ASSERT(newSize <= this->alloc);
@@ -145,6 +145,7 @@ struct QGenericArrayOps
 
     void copyAppend(const T *b, const T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(b < e);
         Q_ASSERT(size_t(e - b) <= this->alloc - uint(this->size));
@@ -158,6 +159,7 @@ struct QGenericArrayOps
 
     void copyAppend(size_t n, const T &t)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(n <= this->alloc - uint(this->size));
 
@@ -171,6 +173,7 @@ struct QGenericArrayOps
 
     void truncate(size_t newSize)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(newSize < size_t(this->size));
 
@@ -182,6 +185,7 @@ struct QGenericArrayOps
 
     void destroyAll() // Call from destructors, ONLY
     {
+        Q_ASSERT(this->isMutable());
         // As this is to be called only from destructor, it doesn't need to be
         // exception safe; size not updated.
 
@@ -196,6 +200,7 @@ struct QGenericArrayOps
 
     void insert(T *where, const T *b, const T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(where >= this->begin() && where < this->end()); // Use copyAppend at end
         Q_ASSERT(b < e);
@@ -261,6 +266,7 @@ struct QGenericArrayOps
 
     void erase(T *b, T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(b < e);
         Q_ASSERT(b >= this->begin() && b < this->end());
         Q_ASSERT(e > this->begin() && e < this->end());
@@ -290,6 +296,7 @@ struct QMovableArrayOps
 
     void insert(T *where, const T *b, const T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(!this->ref.isShared());
         Q_ASSERT(where >= this->begin() && where < this->end()); // Use copyAppend at end
         Q_ASSERT(b < e);
@@ -354,6 +361,7 @@ struct QMovableArrayOps
 
     void erase(T *b, T *e)
     {
+        Q_ASSERT(this->isMutable());
         Q_ASSERT(b < e);
         Q_ASSERT(b >= this->begin() && b < this->end());
         Q_ASSERT(e > this->begin() && e < this->end());
diff --git a/src/corelib/tools/qarraydatapointer.h b/src/corelib/tools/qarraydatapointer.h
index 2245106ec0..f2cd3ec983 100644
--- a/src/corelib/tools/qarraydatapointer.h
+++ b/src/corelib/tools/qarraydatapointer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qbitarray.cpp b/src/corelib/tools/qbitarray.cpp
index 9f7b2db526..5c391d7e4f 100644
--- a/src/corelib/tools/qbitarray.cpp
+++ b/src/corelib/tools/qbitarray.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qbitarray.h b/src/corelib/tools/qbitarray.h
index eaf9b2ff25..768dfa912d 100644
--- a/src/corelib/tools/qbitarray.h
+++ b/src/corelib/tools/qbitarray.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qbytearray.cpp b/src/corelib/tools/qbytearray.cpp
index fb92d82f07..dd235ef7a5 100644
--- a/src/corelib/tools/qbytearray.cpp
+++ b/src/corelib/tools/qbytearray.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,6 +40,7 @@
 #include "qlocale_p.h"
 #include "qscopedpointer.h"
 #include <qdatastream.h>
+#include <qmath.h>
 
 #ifndef QT_NO_COMPRESS
 #include <zlib.h>
@@ -67,24 +60,12 @@ int qFindByteArray(
     const char *needle0, int needleLen);
 
 
-int qAllocMore(int alloc, int extra)
+int qAllocMore(int alloc, int extra) Q_DECL_NOTHROW
 {
     Q_ASSERT(alloc >= 0 && extra >= 0);
     Q_ASSERT_X(alloc < (1 << 30) - extra, "qAllocMore", "Requested size is too large!");
 
-    unsigned nalloc = alloc + extra;
-
-    // Round up to next power of 2
-
-    // Assuming container is growing, always overshoot
-    //--nalloc;
-
-    nalloc |= nalloc >> 1;
-    nalloc |= nalloc >> 2;
-    nalloc |= nalloc >> 4;
-    nalloc |= nalloc >> 8;
-    nalloc |= nalloc >> 16;
-    ++nalloc;
+    unsigned nalloc = qNextPowerOfTwo(alloc + extra);
 
     Q_ASSERT(nalloc > unsigned(alloc + extra));
 
@@ -2677,19 +2658,22 @@ QByteArray QByteArray::right(int len) const
 
 QByteArray QByteArray::mid(int pos, int len) const
 {
-    if ((d->size == 0 && d->ref.isStatic()) || pos > d->size)
+    using namespace QtPrivate;
+    switch (QContainerImplHelper::mid(size(), &pos, &len)) {
+    case QContainerImplHelper::Null:
         return QByteArray();
-    if (len < 0)
-        len = d->size - pos;
-    if (pos < 0) {
-        len += pos;
-        pos = 0;
+    case QContainerImplHelper::Empty:
+    {
+        QByteArrayDataPtr empty = { Data::allocate(0) };
+        return QByteArray(empty);
     }
-    if (len + pos > d->size)
-        len = d->size - pos;
-    if (pos == 0 && len == d->size)
+    case QContainerImplHelper::Full:
         return *this;
-    return QByteArray(d->data() + pos, len);
+    case QContainerImplHelper::Subset:
+        return QByteArray(d->data() + pos, len);
+    }
+    Q_UNREACHABLE();
+    return QByteArray();
 }
 
 /*!
@@ -2705,8 +2689,9 @@ QByteArray QByteArray::toLower() const
 {
     QByteArray s(*this);
     uchar *p = reinterpret_cast<uchar *>(s.data());
+    uchar *e = reinterpret_cast<uchar *>(s.end());
     if (p) {
-        while (*p) {
+        while (p != e) {
             *p = QChar::toLower((ushort)*p);
             p++;
         }
@@ -2728,8 +2713,9 @@ QByteArray QByteArray::toUpper() const
 {
     QByteArray s(*this);
     uchar *p = reinterpret_cast<uchar *>(s.data());
+    uchar *e = reinterpret_cast<uchar *>(s.end());
     if (p) {
-        while (*p) {
+        while (p != e) {
             *p = QChar::toUpper((ushort)*p);
             p++;
         }
@@ -3119,7 +3105,7 @@ QDataStream &operator>>(QDataStream &in, QByteArray &ba)
     replaced with a single space.
 
     Whitespace means any character for which the standard C++
-    isspace() function returns \c true. This includes the ASCII
+    isspace() function returns \c true in the C locale. This includes the ASCII
     characters '\\t', '\\n', '\\v', '\\f', '\\r', and ' '.
 
     Example:
@@ -3137,9 +3123,9 @@ QByteArray QByteArray::simplified() const
     int outc=0;
     char *to = result.d->data();
     for (;;) {
-        while (from!=fromend && isspace(uchar(*from)))
+        while (from!=fromend && ascii_isspace(uchar(*from)))
             from++;
-        while (from!=fromend && !isspace(uchar(*from)))
+        while (from!=fromend && !ascii_isspace(uchar(*from)))
             to[outc++] = *from++;
         if (from!=fromend)
             to[outc++] = ' ';
@@ -3157,7 +3143,7 @@ QByteArray QByteArray::simplified() const
     and the end.
 
     Whitespace means any character for which the standard C++
-    isspace() function returns \c true. This includes the ASCII
+    isspace() function returns \c true in the C locale. This includes the ASCII
     characters '\\t', '\\n', '\\v', '\\f', '\\r', and ' '.
 
     Example:
@@ -3172,14 +3158,14 @@ QByteArray QByteArray::trimmed() const
     if (d->size == 0)
         return *this;
     const char *s = d->data();
-    if (!isspace(uchar(*s)) && !isspace(uchar(s[d->size-1])))
+    if (!ascii_isspace(uchar(*s)) && !ascii_isspace(uchar(s[d->size-1])))
         return *this;
     int start = 0;
     int end = d->size - 1;
-    while (start<=end && isspace(uchar(s[start])))  // skip white space from start
+    while (start<=end && ascii_isspace(uchar(s[start])))  // skip white space from start
         start++;
     if (start <= end) {                          // only white space
-        while (end && isspace(uchar(s[end])))           // skip white space from end
+        while (end && ascii_isspace(uchar(s[end])))           // skip white space from end
             end--;
     }
     int l = end - start + 1;
@@ -4186,6 +4172,27 @@ QByteArray QByteArray::fromPercentEncoding(const QByteArray &input, char percent
     return tmp;
 }
 
+/*! \fn QByteArray QByteArray::fromStdString(const std::string &str)
+    \since 5.4
+
+    Returns a copy of the \a str string as a QByteArray.
+
+    \sa toStdString(), QString::fromStdString()
+*/
+
+/*!
+    \fn std::string QByteArray::toStdString() const
+    \since 5.4
+
+    Returns a std::string object with the data contained in this
+    QByteArray.
+
+    This operator is mostly useful to pass a QByteArray to a function
+    that accepts a std::string object.
+
+    \sa fromStdString(), QString::toStdString()
+*/
+
 /*! \fn QByteArray QByteArray::fromCFData(CFDataRef data)
     \since 5.3
 
@@ -4410,6 +4417,14 @@ QByteArray QByteArray::toPercentEncoding(const QByteArray &exclude, const QByteA
     \internal
 */
 
+/*! \typedef QByteArray::size_type
+    \internal
+*/
+
+/*! \typedef QByteArray::difference_type
+    \internal
+*/
+
 /*! \typedef QByteArray::const_reference
     \internal
 */
@@ -4418,6 +4433,14 @@ QByteArray QByteArray::toPercentEncoding(const QByteArray &exclude, const QByteA
     \internal
 */
 
+/*! \typedef QByteArray::const_pointer
+    \internal
+*/
+
+/*! \typedef QByteArray::pointer
+    \internal
+*/
+
 /*! \typedef QByteArray::value_type
   \internal
  */
diff --git a/src/corelib/tools/qbytearray.h b/src/corelib/tools/qbytearray.h
index 0a2f7a9e53..f13b1c16cd 100644
--- a/src/corelib/tools/qbytearray.h
+++ b/src/corelib/tools/qbytearray.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,6 +42,8 @@
 #include <string.h>
 #include <stdarg.h>
 
+#include <string>
+
 #ifdef truncate
 #error qbytearray.h must be included before any header file that defines truncate
 #endif
@@ -247,9 +241,9 @@ public:
     int count(const char *a) const;
     int count(const QByteArray &a) const;
 
-    QByteArray left(int len) const;
-    QByteArray right(int len) const;
-    QByteArray mid(int index, int len = -1) const;
+    QByteArray left(int len) const Q_REQUIRED_RESULT;
+    QByteArray right(int len) const Q_REQUIRED_RESULT;
+    QByteArray mid(int index, int len = -1) const Q_REQUIRED_RESULT;
 
     bool startsWith(const QByteArray &a) const;
     bool startsWith(char c) const;
@@ -262,13 +256,13 @@ public:
     void truncate(int pos);
     void chop(int n);
 
-    QByteArray toLower() const;
-    QByteArray toUpper() const;
+    QByteArray toLower() const Q_REQUIRED_RESULT;
+    QByteArray toUpper() const Q_REQUIRED_RESULT;
 
-    QByteArray trimmed() const;
-    QByteArray simplified() const;
-    QByteArray leftJustified(int width, char fill = ' ', bool truncate = false) const;
-    QByteArray rightJustified(int width, char fill = ' ', bool truncate = false) const;
+    QByteArray trimmed() const Q_REQUIRED_RESULT;
+    QByteArray simplified() const Q_REQUIRED_RESULT;
+    QByteArray leftJustified(int width, char fill = ' ', bool truncate = false) const Q_REQUIRED_RESULT;
+    QByteArray rightJustified(int width, char fill = ' ', bool truncate = false) const Q_REQUIRED_RESULT;
 
     QByteArray &prepend(char c);
     QByteArray &prepend(const char *s);
@@ -300,7 +294,7 @@ public:
 
     QList<QByteArray> split(char sep) const;
 
-    QByteArray repeated(int times) const;
+    QByteArray repeated(int times) const Q_REQUIRED_RESULT;
 
 #ifndef QT_NO_CAST_TO_ASCII
     QT_ASCII_CAST_WARN QByteArray &append(const QString &s);
@@ -349,16 +343,16 @@ public:
     QByteArray &setNum(double, char f = 'g', int prec = 6);
     QByteArray &setRawData(const char *a, uint n); // ### Qt 6: use an int
 
-    static QByteArray number(int, int base = 10);
-    static QByteArray number(uint, int base = 10);
-    static QByteArray number(qlonglong, int base = 10);
-    static QByteArray number(qulonglong, int base = 10);
-    static QByteArray number(double, char f = 'g', int prec = 6);
-    static QByteArray fromRawData(const char *, int size);
-    static QByteArray fromBase64(const QByteArray &base64, Base64Options options);
-    static QByteArray fromBase64(const QByteArray &base64); // ### Qt6 merge with previous
-    static QByteArray fromHex(const QByteArray &hexEncoded);
-    static QByteArray fromPercentEncoding(const QByteArray &pctEncoded, char percent = '%');
+    static QByteArray number(int, int base = 10) Q_REQUIRED_RESULT;
+    static QByteArray number(uint, int base = 10) Q_REQUIRED_RESULT;
+    static QByteArray number(qlonglong, int base = 10) Q_REQUIRED_RESULT;
+    static QByteArray number(qulonglong, int base = 10) Q_REQUIRED_RESULT;
+    static QByteArray number(double, char f = 'g', int prec = 6) Q_REQUIRED_RESULT;
+    static QByteArray fromRawData(const char *, int size) Q_REQUIRED_RESULT;
+    static QByteArray fromBase64(const QByteArray &base64, Base64Options options) Q_REQUIRED_RESULT;
+    static QByteArray fromBase64(const QByteArray &base64) Q_REQUIRED_RESULT; // ### Qt6 merge with previous
+    static QByteArray fromHex(const QByteArray &hexEncoded) Q_REQUIRED_RESULT;
+    static QByteArray fromPercentEncoding(const QByteArray &pctEncoded, char percent = '%') Q_REQUIRED_RESULT;
 
 #if defined(Q_OS_MAC) || defined(Q_QDOC)
     static QByteArray fromCFData(CFDataRef data);
@@ -387,8 +381,12 @@ public:
     const_iterator constEnd() const;
 
     // stl compatibility
+    typedef int size_type;
+    typedef qptrdiff difference_type;
     typedef const char & const_reference;
     typedef char & reference;
+    typedef char *pointer;
+    typedef const char *const_pointer;
     typedef char value_type;
     void push_back(char c);
     void push_back(const char *c);
@@ -397,6 +395,9 @@ public:
     void push_front(const char *c);
     void push_front(const QByteArray &a);
 
+    static inline QByteArray fromStdString(const std::string &s);
+    inline std::string toStdString() const;
+
     inline int count() const { return d->size; }
     int length() const { return d->size; }
     bool isNull() const;
@@ -620,6 +621,11 @@ inline QByteArray &QByteArray::setNum(uint n, int base)
 inline QByteArray &QByteArray::setNum(float n, char f, int prec)
 { return setNum(double(n),f,prec); }
 
+inline std::string QByteArray::toStdString() const
+{ return std::string(constData(), length()); }
+
+inline QByteArray QByteArray::fromStdString(const std::string &s)
+{ return QByteArray(s.data(), int(s.size())); }
 
 #if !defined(QT_NO_DATASTREAM) || (defined(QT_BOOTSTRAPPED) && !defined(QT_BUILD_QMAKE))
 Q_CORE_EXPORT QDataStream &operator<<(QDataStream &, const QByteArray &);
diff --git a/src/corelib/tools/qbytearraylist.cpp b/src/corelib/tools/qbytearraylist.cpp
new file mode 100644
index 0000000000..8fc16dc1a4
--- /dev/null
+++ b/src/corelib/tools/qbytearraylist.cpp
@@ -0,0 +1,155 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 by Southwest Research Institute (R)
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <qbytearraylist.h>
+
+QT_BEGIN_NAMESPACE
+
+/*! \typedef QByteArrayListIterator
+    \relates QByteArrayList
+
+    The QByteArrayListIterator type definition provides a Java-style const
+    iterator for QByteArrayList.
+
+    QByteArrayList provides both \l{Java-style iterators} and
+    \l{STL-style iterators}. The Java-style const iterator is simply
+    a type definition for QListIterator<QByteArray>.
+
+    \sa QMutableByteArrayListIterator, QByteArrayList::const_iterator
+*/
+
+/*! \typedef QMutableByteArrayListIterator
+    \relates QByteArrayList
+
+    The QByteArrayListIterator type definition provides a Java-style
+    non-const iterator for QByteArrayList.
+
+    QByteArrayList provides both \l{Java-style iterators} and
+    \l{STL-style iterators}. The Java-style non-const iterator is
+    simply a type definition for QMutableListIterator<QByteArray>.
+
+    \sa QByteArrayListIterator, QByteArrayList::iterator
+*/
+
+/*!
+    \class QByteArrayList
+    \inmodule QtCore
+    \since 5.4
+    \brief The QByteArrayList class provides a list of byte arrays.
+
+    \ingroup tools
+    \ingroup shared
+    \ingroup string-processing
+
+    \reentrant
+
+    QByteArrayList is actually just a QList<QByteArray>. It is documented as a
+    full class just for simplicity of documenting the member methods that exist
+    only in QList<QByteArray>.
+
+    All of QList's functionality also applies to QByteArrayList. For example, you
+    can use isEmpty() to test whether the list is empty, and you can call
+    functions like append(), prepend(), insert(), replace(), removeAll(),
+    removeAt(), removeFirst(), removeLast(), and removeOne() to modify a
+    QByteArrayList. In addition, QByteArrayList provides several join()
+    methods for concatenating the list into a single QByteArray.
+
+    The purpose of QByteArrayList is quite different from that of QStringList.
+    Whereas QStringList has many methods for manipulation of elements within
+    the list, QByteArrayList does not.
+    Normally, QStringList should be used whenever working with a list of printable
+    strings. QByteArrayList should be used to handle and efficiently join large blobs
+    of binary data, as when sequentially receiving serialized data through a
+    QIODevice.
+
+    \sa QByteArray, QStringList
+*/
+
+/*!
+    \fn QByteArray QByteArrayList::join() const
+
+    Joins all the byte arrays into a single byte array.
+*/
+
+/*!
+    \fn QByteArray QByteArrayList::join(const QByteArray &separator) const
+
+    Joins all the byte arrays into a single byte array with each
+    element separated by the given \a separator.
+*/
+
+/*!
+    \fn QByteArray QByteArrayList::join(char separator) const
+
+    Joins all the byte arrays into a single byte array with each
+    element separated by the given \a separator.
+*/
+
+static int QByteArrayList_joinedSize(const QByteArrayList *that, int seplen)
+{
+    int totalLength = 0;
+    const int size = that->size();
+
+    for (int i = 0; i < size; ++i)
+        totalLength += that->at(i).size();
+
+    if (size > 0)
+        totalLength += seplen * (size - 1);
+
+    return totalLength;
+}
+
+QByteArray QtPrivate::QByteArrayList_join(const QByteArrayList *that, const char *sep, int seplen)
+{
+    QByteArray res;
+    if (const int joinedSize = QByteArrayList_joinedSize(that, seplen))
+        res.reserve(joinedSize); // don't call reserve(0) - it allocates one byte for the NUL
+    const int size = that->size();
+    for (int i = 0; i < size; ++i) {
+        if (i)
+            res.append(sep, seplen);
+        res += that->at(i);
+    }
+    return res;
+}
+
+QT_END_NAMESPACE
diff --git a/src/corelib/io/qloggingcategory_p.h b/src/corelib/tools/qbytearraylist.h
index 7802f017fd..9d7e776028 100644
--- a/src/corelib/io/qloggingcategory_p.h
+++ b/src/corelib/tools/qbytearraylist.h
@@ -1,6 +1,7 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 by Southwest Research Institute (R)
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
@@ -39,28 +40,42 @@
 **
 ****************************************************************************/
 
-#ifndef QLOGGINGCATEGORY_P_H
-#define QLOGGINGCATEGORY_P_H
+#include <QtCore/qlist.h>
 
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists for the convenience
-// of a number of Qt sources files.  This header file may change from
-// version to version without notice, or even be removed.
-//
-// We mean it.
-//
+#ifndef QBYTEARRAYLIST_H
+#define QBYTEARRAYLIST_H
 
-#include <QtCore/qglobal.h>
+#include <QtCore/qbytearray.h>
 
 QT_BEGIN_NAMESPACE
 
-// unique pointer to default category
-// (allows to compare for pointers instead of strings)
-extern const char qtDefaultCategoryName[];
+typedef QListIterator<QByteArray> QByteArrayListIterator;
+typedef QMutableListIterator<QByteArray> QMutableByteArrayListIterator;
+typedef QList<QByteArray> QByteArrayList;
+
+namespace QtPrivate {
+    QByteArray Q_CORE_EXPORT QByteArrayList_join(const QByteArrayList *that, const char *separator, int separatorLength);
+}
+
+#ifdef Q_QDOC
+class QByteArrayList : public QList<QByteArray>
+#else
+template <> struct QListSpecialMethods<QByteArray>
+#endif
+{
+    inline QByteArray join() const
+    { return QtPrivate::QByteArrayList_join(self(), 0, 0); }
+    inline QByteArray join(const QByteArray &sep) const
+    { return QtPrivate::QByteArrayList_join(self(), sep.constData(), sep.size()); }
+    inline QByteArray join(char sep) const
+    { return QtPrivate::QByteArrayList_join(self(), &sep, 1); }
+
+private:
+    typedef QList<QByteArray> Self;
+    Self *self() { return static_cast<Self *>(this); }
+    const Self *self() const { return static_cast<const Self *>(this); }
+};
 
 QT_END_NAMESPACE
 
-#endif // QLOGGINGCATEGORY_P_H
+#endif // QBYTEARRAYLIST_H
diff --git a/src/corelib/tools/qbytearraymatcher.cpp b/src/corelib/tools/qbytearraymatcher.cpp
index d030192117..f14d941c27 100644
--- a/src/corelib/tools/qbytearraymatcher.cpp
+++ b/src/corelib/tools/qbytearraymatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qbytearraymatcher.h b/src/corelib/tools/qbytearraymatcher.h
index da6a337a69..c7b83a98cc 100644
--- a/src/corelib/tools/qbytearraymatcher.h
+++ b/src/corelib/tools/qbytearraymatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qbytedata_p.h b/src/corelib/tools/qbytedata_p.h
index 267e9626df..e994f2400b 100644
--- a/src/corelib/tools/qbytedata_p.h
+++ b/src/corelib/tools/qbytedata_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qcache.h b/src/corelib/tools/qcache.h
index 5890a94dc2..960e0422a1 100644
--- a/src/corelib/tools/qcache.h
+++ b/src/corelib/tools/qcache.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qchar.cpp b/src/corelib/tools/qchar.cpp
index eb59cc719f..7288ea5c5d 100644
--- a/src/corelib/tools/qchar.cpp
+++ b/src/corelib/tools/qchar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1398,7 +1390,7 @@ QChar::UnicodeVersion QChar::currentUnicodeVersion()
 
 
 template <typename T>
-static inline T toLowerCase_helper(T uc)
+Q_DECL_CONST_FUNCTION static inline T toLowerCase_helper(T uc)
 {
     const QUnicodeTables::Properties *p = qGetProp(uc);
     if (p->lowerCaseSpecial) {
@@ -1409,7 +1401,7 @@ static inline T toLowerCase_helper(T uc)
 }
 
 template <typename T>
-static inline T toUpperCase_helper(T uc)
+Q_DECL_CONST_FUNCTION static inline T toUpperCase_helper(T uc)
 {
     const QUnicodeTables::Properties *p = qGetProp(uc);
     if (p->upperCaseSpecial) {
@@ -1420,7 +1412,7 @@ static inline T toUpperCase_helper(T uc)
 }
 
 template <typename T>
-static inline T toTitleCase_helper(T uc)
+Q_DECL_CONST_FUNCTION static inline T toTitleCase_helper(T uc)
 {
     const QUnicodeTables::Properties *p = qGetProp(uc);
     if (p->titleCaseSpecial) {
@@ -1431,7 +1423,7 @@ static inline T toTitleCase_helper(T uc)
 }
 
 template <typename T>
-static inline T toCaseFolded_helper(T uc)
+Q_DECL_CONST_FUNCTION static inline T toCaseFolded_helper(T uc)
 {
     const QUnicodeTables::Properties *p = qGetProp(uc);
     if (p->caseFoldSpecial) {
@@ -1527,13 +1519,13 @@ static inline ushort foldCase(ushort ch)
     \fn QChar QChar::toCaseFolded() const
 
     Returns the case folded equivalent of the character.
-    For most Unicode characters this is the same as toLowerCase().
+    For most Unicode characters this is the same as toLower().
 */
 
 /*!
     \overload
     Returns the case folded equivalent of the UCS-4-encoded character specified
-    by \a ucs4. For most Unicode characters this is the same as toLowerCase().
+    by \a ucs4. For most Unicode characters this is the same as toLower().
 */
 uint QChar::toCaseFolded(uint ucs4)
 {
diff --git a/src/corelib/tools/qchar.h b/src/corelib/tools/qchar.h
index 24c757f9f4..4db09e0f82 100644
--- a/src/corelib/tools/qchar.h
+++ b/src/corelib/tools/qchar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -388,7 +380,7 @@ public:
     QT_DEPRECATED inline char toAscii() const { return toLatin1(); }
 #endif
     inline char toLatin1() const;
-    inline ushort unicode() const { return ucs; }
+    Q_DECL_CONSTEXPR inline ushort unicode() const { return ucs; }
     inline ushort &unicode() { return ucs; }
 
 #if QT_DEPRECATED_SINCE(5, 0)
@@ -450,50 +442,50 @@ public:
         return ushort(ucs4%0x400 + 0xdc00);
     }
 
-    static Category QT_FASTCALL category(uint ucs4);
-    static Direction QT_FASTCALL direction(uint ucs4);
-    static JoiningType QT_FASTCALL joiningType(uint ucs4);
+    static Category QT_FASTCALL category(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static Direction QT_FASTCALL direction(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static JoiningType QT_FASTCALL joiningType(uint ucs4) Q_DECL_CONST_FUNCTION;
 #if QT_DEPRECATED_SINCE(5, 3)
-    QT_DEPRECATED static Joining QT_FASTCALL joining(uint ucs4);
+    QT_DEPRECATED static Joining QT_FASTCALL joining(uint ucs4) Q_DECL_CONST_FUNCTION;
 #endif
-    static unsigned char QT_FASTCALL combiningClass(uint ucs4);
+    static unsigned char QT_FASTCALL combiningClass(uint ucs4) Q_DECL_CONST_FUNCTION;
 
-    static uint QT_FASTCALL mirroredChar(uint ucs4);
-    static bool QT_FASTCALL hasMirrored(uint ucs4);
+    static uint QT_FASTCALL mirroredChar(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL hasMirrored(uint ucs4) Q_DECL_CONST_FUNCTION;
 
     static QString QT_FASTCALL decomposition(uint ucs4);
-    static Decomposition QT_FASTCALL decompositionTag(uint ucs4);
+    static Decomposition QT_FASTCALL decompositionTag(uint ucs4) Q_DECL_CONST_FUNCTION;
 
-    static int QT_FASTCALL digitValue(uint ucs4);
-    static uint QT_FASTCALL toLower(uint ucs4);
-    static uint QT_FASTCALL toUpper(uint ucs4);
-    static uint QT_FASTCALL toTitleCase(uint ucs4);
-    static uint QT_FASTCALL toCaseFolded(uint ucs4);
+    static int QT_FASTCALL digitValue(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static uint QT_FASTCALL toLower(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static uint QT_FASTCALL toUpper(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static uint QT_FASTCALL toTitleCase(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static uint QT_FASTCALL toCaseFolded(uint ucs4) Q_DECL_CONST_FUNCTION;
 
-    static Script QT_FASTCALL script(uint ucs4);
+    static Script QT_FASTCALL script(uint ucs4) Q_DECL_CONST_FUNCTION;
 
-    static UnicodeVersion QT_FASTCALL unicodeVersion(uint ucs4);
+    static UnicodeVersion QT_FASTCALL unicodeVersion(uint ucs4) Q_DECL_CONST_FUNCTION;
 
-    static UnicodeVersion QT_FASTCALL currentUnicodeVersion();
+    static UnicodeVersion QT_FASTCALL currentUnicodeVersion() Q_DECL_CONST_FUNCTION;
 
-    static bool QT_FASTCALL isPrint(uint ucs4);
-    static inline bool isSpace(uint ucs4);
-    static bool QT_FASTCALL isMark(uint ucs4);
-    static bool QT_FASTCALL isPunct(uint ucs4);
-    static bool QT_FASTCALL isSymbol(uint ucs4);
-    static inline bool isLetter(uint ucs4);
-    static inline bool isNumber(uint ucs4);
-    static inline bool isLetterOrNumber(uint ucs4);
-    static inline bool isDigit(uint ucs4);
-    static inline bool isLower(uint ucs4);
-    static inline bool isUpper(uint ucs4);
-    static inline bool isTitleCase(uint ucs4);
+    static bool QT_FASTCALL isPrint(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isSpace(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL isMark(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL isPunct(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL isSymbol(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isLetter(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isNumber(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isLetterOrNumber(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isDigit(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isLower(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isUpper(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static inline bool isTitleCase(uint ucs4) Q_DECL_CONST_FUNCTION;
 
 private:
-    static bool QT_FASTCALL isSpace_helper(uint ucs4);
-    static bool QT_FASTCALL isLetter_helper(uint ucs4);
-    static bool QT_FASTCALL isNumber_helper(uint ucs4);
-    static bool QT_FASTCALL isLetterOrNumber_helper(uint ucs4);
+    static bool QT_FASTCALL isSpace_helper(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL isLetter_helper(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL isNumber_helper(uint ucs4) Q_DECL_CONST_FUNCTION;
+    static bool QT_FASTCALL isLetterOrNumber_helper(uint ucs4) Q_DECL_CONST_FUNCTION;
 
 #ifdef QT_NO_CAST_FROM_ASCII
     QChar(char c);
diff --git a/src/corelib/tools/qcollator.cpp b/src/corelib/tools/qcollator.cpp
index f7dfaa7d33..8b9e8e79f3 100644
--- a/src/corelib/tools/qcollator.cpp
+++ b/src/corelib/tools/qcollator.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Aleix Pol Gonzalez <aleixpol@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,7 +66,7 @@ QT_BEGIN_NAMESPACE
 
 /*!
     Constructs a QCollator from \a locale. If \a locale is not specified
-    QLocale::default() will be used.
+    the system's default locale is used.
 
     \sa setLocale()
  */
@@ -166,10 +158,12 @@ void QCollator::detach()
  */
 void QCollator::setLocale(const QLocale &locale)
 {
+    if (locale == d->locale)
+        return;
+
     detach();
-    d->clear();
     d->locale = locale;
-    d->init();
+    d->dirty = true;
 }
 
 /*!
@@ -187,6 +181,15 @@ QLocale QCollator::locale() const
 
     \sa caseSensitivity()
  */
+void QCollator::setCaseSensitivity(Qt::CaseSensitivity cs)
+{
+    if (d->caseSensitivity == cs)
+        return;
+
+    detach();
+    d->caseSensitivity = cs;
+    d->dirty = true;
+}
 
 /*!
     \fn Qt::CaseSensitivity QCollator::caseSensitivity() const
@@ -195,6 +198,10 @@ QLocale QCollator::locale() const
 
     \sa setCaseSensitivity()
  */
+Qt::CaseSensitivity QCollator::caseSensitivity() const
+{
+    return d->caseSensitivity;
+}
 
 /*!
     \fn void QCollator::setNumericMode(bool on)
@@ -212,6 +219,15 @@ QLocale QCollator::locale() const
 
     \sa numericMode()
  */
+void QCollator::setNumericMode(bool on)
+{
+    if (d->numericMode == on)
+        return;
+
+    detach();
+    d->numericMode = on;
+    d->dirty = true;
+}
 
 /*!
     \fn bool QCollator::numericMode() const
@@ -220,6 +236,10 @@ QLocale QCollator::locale() const
 
     \sa setNumericMode()
  */
+bool QCollator::numericMode() const
+{
+    return d->numericMode;
+}
 
 /*!
     \fn void QCollator::setIgnorePunctuation(bool on)
@@ -230,6 +250,15 @@ QLocale QCollator::locale() const
 
     \sa ignorePunctuation()
  */
+void QCollator::setIgnorePunctuation(bool on)
+{
+    if (d->ignorePunctuation == on)
+        return;
+
+    detach();
+    d->ignorePunctuation = on;
+    d->dirty = true;
+}
 
 /*!
     \fn bool QCollator::ignorePunctuation() const
@@ -238,6 +267,10 @@ QLocale QCollator::locale() const
 
     \sa setIgnorePunctuation()
  */
+bool QCollator::ignorePunctuation() const
+{
+    return d->ignorePunctuation;
+}
 
 /*!
     \fn int QCollator::compare(const QString &s1, const QString &s2) const
diff --git a/src/corelib/tools/qcollator.h b/src/corelib/tools/qcollator.h
index 781e95b10c..f9ae44cf6b 100644
--- a/src/corelib/tools/qcollator.h
+++ b/src/corelib/tools/qcollator.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Aleix Pol Gonzalez <aleixpol@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qcollator_icu.cpp b/src/corelib/tools/qcollator_icu.cpp
index 23e88b5015..4442442a65 100644
--- a/src/corelib/tools/qcollator_icu.cpp
+++ b/src/corelib/tools/qcollator_icu.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Aleix Pol Gonzalez <aleixpol@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,8 @@ QT_BEGIN_NAMESPACE
 
 void QCollatorPrivate::init()
 {
+    cleanup();
+
     UErrorCode status = U_ZERO_ERROR;
     QByteArray name = locale.bcp47Name().replace(QLatin1Char('-'), QLatin1Char('_')).toLatin1();
     collator = ucol_open(name.constData(), &status);
@@ -63,17 +57,6 @@ void QCollatorPrivate::init()
 
     // enable normalization by default
     ucol_setAttribute(collator, UCOL_NORMALIZATION_MODE, UCOL_ON, &status);
-}
-
-void QCollatorPrivate::cleanup()
-{
-    if (collator)
-        ucol_close(collator);
-}
-
-void QCollator::setCaseSensitivity(Qt::CaseSensitivity cs)
-{
-    detach();
 
     // The strength attribute in ICU is rather badly documented. Basically UCOL_PRIMARY
     // ignores differences between base characters and accented characters as well as case.
@@ -82,55 +65,38 @@ void QCollator::setCaseSensitivity(Qt::CaseSensitivity cs)
     // and does case sensitive comparison.
     // UCOL_QUATERNARY is used as default in a few languages such as Japanese to take care of some
     // additional differences in those languages.
-    UColAttributeValue val = (cs == Qt::CaseSensitive) ? UCOL_DEFAULT_STRENGTH : UCOL_SECONDARY;
+    UColAttributeValue val = (caseSensitivity == Qt::CaseSensitive) ? UCOL_DEFAULT_STRENGTH : UCOL_SECONDARY;
 
-    UErrorCode status = U_ZERO_ERROR;
-    ucol_setAttribute(d->collator, UCOL_STRENGTH, val, &status);
+    status = U_ZERO_ERROR;
+    ucol_setAttribute(collator, UCOL_STRENGTH, val, &status);
     if (U_FAILURE(status))
         qWarning("ucol_setAttribute: Case First failed: %d", status);
-}
 
-Qt::CaseSensitivity QCollator::caseSensitivity() const
-{
-    UErrorCode status = U_ZERO_ERROR;
-    UColAttributeValue attribute = ucol_getAttribute(d->collator, UCOL_CASE_FIRST, &status);
-    return (attribute == UCOL_OFF) ? Qt::CaseInsensitive : Qt::CaseSensitive;
-}
-
-void QCollator::setNumericMode(bool on)
-{
-    detach();
-
-    UErrorCode status = U_ZERO_ERROR;
-    ucol_setAttribute(d->collator, UCOL_NUMERIC_COLLATION, on ? UCOL_ON : UCOL_OFF, &status);
+    status = U_ZERO_ERROR;
+    ucol_setAttribute(collator, UCOL_NUMERIC_COLLATION, numericMode ? UCOL_ON : UCOL_OFF, &status);
     if (U_FAILURE(status))
         qWarning("ucol_setAttribute: numeric collation failed: %d", status);
-}
-
-bool QCollator::numericMode() const
-{
-    UErrorCode status;
-    return ucol_getAttribute(d->collator, UCOL_NUMERIC_COLLATION, &status) == UCOL_ON;
-}
 
-void QCollator::setIgnorePunctuation(bool on)
-{
-    detach();
-
-    UErrorCode status;
-    ucol_setAttribute(d->collator, UCOL_ALTERNATE_HANDLING, on ? UCOL_SHIFTED : UCOL_NON_IGNORABLE, &status);
+    status = U_ZERO_ERROR;
+    ucol_setAttribute(collator, UCOL_ALTERNATE_HANDLING, ignorePunctuation ? UCOL_SHIFTED : UCOL_NON_IGNORABLE, &status);
     if (U_FAILURE(status))
         qWarning("ucol_setAttribute: Alternate handling failed: %d", status);
+
+    dirty = false;
 }
 
-bool QCollator::ignorePunctuation() const
+void QCollatorPrivate::cleanup()
 {
-    UErrorCode status;
-    return ucol_getAttribute(d->collator, UCOL_ALTERNATE_HANDLING, &status) == UCOL_SHIFTED;
+    if (collator)
+        ucol_close(collator);
+    collator = 0;
 }
 
 int QCollator::compare(const QChar *s1, int len1, const QChar *s2, int len2) const
 {
+    if (d->dirty)
+        d->init();
+
     return ucol_strcoll(d->collator, (const UChar *)s1, len1, (const UChar *)s2, len2);
 }
 
@@ -146,6 +112,9 @@ int QCollator::compare(const QStringRef &s1, const QStringRef &s2) const
 
 QCollatorSortKey QCollator::sortKey(const QString &string) const
 {
+    if (d->dirty)
+        d->init();
+
     QByteArray result(16 + string.size() + (string.size() >> 2), Qt::Uninitialized);
     int size = ucol_getSortKey(d->collator, (const UChar *)string.constData(),
                                string.size(), (uint8_t *)result.data(), result.size());
diff --git a/src/corelib/tools/qcollator_macx.cpp b/src/corelib/tools/qcollator_macx.cpp
index b9477afedb..6bfa1798ef 100644
--- a/src/corelib/tools/qcollator_macx.cpp
+++ b/src/corelib/tools/qcollator_macx.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,85 +47,50 @@ void QCollatorPrivate::init()
 {
     cleanup();
     LocaleRef localeRef;
-    int rc = LocaleRefFromLocaleString(locale.name().toLocal8Bit(), &localeRef);
+    int rc = LocaleRefFromLocaleString(locale.bcp47Name().toLocal8Bit(), &localeRef);
     if (rc != 0)
         qWarning() << "couldn't initialize the locale";
 
+    UInt32 options = 0;
+
+    if (caseSensitivity == Qt::CaseInsensitive)
+        options |= kUCCollateCaseInsensitiveMask;
+    if (numericMode)
+        options |= kUCCollateDigitsAsNumberMask | kUCCollateDigitsOverrideMask;
+    if (ignorePunctuation)
+        options |= kUCCollatePunctuationSignificantMask;
+
     OSStatus status = UCCreateCollator(
         localeRef,
         0,
-        collator.options,
-        &collator.collator
+        options,
+        &collator
     );
     if (status != 0)
         qWarning() << "Couldn't initialize the collator";
-}
-
-void QCollatorPrivate::cleanup()
-{
-    UCDisposeCollator(&collator.collator);
-    collator.collator = 0;
-}
-
-void QCollator::setCaseSensitivity(Qt::CaseSensitivity cs)
-{
-    detach();
-
-    if (cs == Qt::CaseSensitive)
-        d->collator.options &= ~kUCCollateCaseInsensitiveMask;
-    else
-        d->collator.options |= kUCCollateCaseInsensitiveMask;
-    d->init();
-}
-
-Qt::CaseSensitivity QCollator::caseSensitivity() const
-{
-    return !(d->collator.options & kUCCollateCaseInsensitiveMask) ? Qt::CaseInsensitive : Qt::CaseSensitive;
-}
-
-void QCollator::setNumericMode(bool on)
-{
-    detach();
-
-    if (on)
-        d->collator.options |= kUCCollateDigitsAsNumberMask | kUCCollateDigitsOverrideMask;
-    else
-        d->collator.options &= ~(kUCCollateDigitsAsNumberMask | kUCCollateDigitsOverrideMask);
 
-    d->init();
+    dirty = false;
 }
 
-bool QCollator::numericMode() const
-{
-    return bool(d->collator.options & kUCCollateDigitsAsNumberMask);
-}
-
-void QCollator::setIgnorePunctuation(bool on)
-{
-    detach();
-
-    if (on)
-        d->collator.options |= kUCCollatePunctuationSignificantMask;
-    else
-        d->collator.options &= ~kUCCollatePunctuationSignificantMask;
-
-    d->init();
-}
-
-bool QCollator::ignorePunctuation() const
+void QCollatorPrivate::cleanup()
 {
-    return bool(d->collator.options & kUCCollatePunctuationSignificantMask);
+    if (collator)
+        UCDisposeCollator(&collator);
+    collator = 0;
 }
 
 int QCollator::compare(const QChar *s1, int len1, const QChar *s2, int len2) const
 {
+    if (d->dirty)
+        d->init();
+
     SInt32 result;
     Boolean equivalent;
-    UCCompareText(d->collator.collator,
-                         reinterpret_cast<const UniChar *>(s1), len1,
-                         reinterpret_cast<const UniChar *>(s2), len2,
-                         &equivalent,
-                         &result);
+    UCCompareText(d->collator,
+                  reinterpret_cast<const UniChar *>(s1), len1,
+                  reinterpret_cast<const UniChar *>(s2), len2,
+                  &equivalent,
+                  &result);
     if (equivalent)
         return 0;
     return result < 0 ? -1 : 1;
@@ -150,15 +107,18 @@ int QCollator::compare(const QStringRef &s1, const QStringRef &s2) const
 
 QCollatorSortKey QCollator::sortKey(const QString &string) const
 {
+    if (d->dirty)
+        d->init();
+
     //Documentation recommends having it 5 times as big as the input
     QVector<UCCollationValue> ret(string.size() * 5);
     ItemCount actualSize;
-    int status = UCGetCollationKey(d->collator.collator, reinterpret_cast<const UniChar *>(string.constData()), string.count(),
+    int status = UCGetCollationKey(d->collator, reinterpret_cast<const UniChar *>(string.constData()), string.count(),
                                    ret.size(), &actualSize, ret.data());
 
     ret.resize(actualSize+1);
     if (status == kUCOutputBufferTooSmall) {
-        UCGetCollationKey(d->collator.collator, reinterpret_cast<const UniChar *>(string.constData()), string.count(),
+        UCGetCollationKey(d->collator, reinterpret_cast<const UniChar *>(string.constData()), string.count(),
                           ret.size(), &actualSize, ret.data());
     }
     ret[actualSize] = 0;
diff --git a/src/corelib/tools/qcollator_p.h b/src/corelib/tools/qcollator_p.h
index 526521ebf4..3f33956cb7 100644
--- a/src/corelib/tools/qcollator_p.h
+++ b/src/corelib/tools/qcollator_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Aleix Pol Gonzalez <aleixpol@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,6 +52,8 @@
 #include <unicode/ucol.h>
 #elif defined(Q_OS_OSX)
 #include <CoreServices/CoreServices.h>
+#elif defined(Q_OS_WIN)
+#include <qt_windows.h>
 #endif
 
 QT_BEGIN_NAMESPACE
@@ -69,17 +63,16 @@ typedef UCollator *CollatorType;
 typedef QByteArray CollatorKeyType;
 
 #elif defined(Q_OS_OSX)
+typedef CollatorRef CollatorType;
 typedef QVector<UCCollationValue> CollatorKeyType;
 
-struct CollatorType {
-    CollatorType(int opt) : collator(NULL), options(opt) {}
-
-    CollatorRef collator;
-    UInt32 options;
-};
 #elif defined(Q_OS_WIN)
 typedef QString CollatorKeyType;
 typedef int CollatorType;
+#  ifdef Q_OS_WINRT
+#    define USE_COMPARESTRINGEX
+#  endif
+
 #else //posix
 typedef QVector<wchar_t> CollatorKeyType;
 typedef int CollatorType;
@@ -90,6 +83,17 @@ class Q_CORE_EXPORT QCollatorPrivate
 public:
     QAtomicInt ref;
     QLocale locale;
+#if defined(Q_OS_WIN) && !defined(QT_USE_ICU)
+#ifdef USE_COMPARESTRINGEX
+    QString localeName;
+#else
+    LCID localeID;
+#endif
+#endif
+    Qt::CaseSensitivity caseSensitivity;
+    bool numericMode;
+    bool ignorePunctuation;
+    bool dirty;
 
     CollatorType collator;
 
@@ -102,7 +106,12 @@ public:
     void cleanup();
 
     QCollatorPrivate()
-        : ref(1), collator(0)
+        : ref(1),
+          caseSensitivity(Qt::CaseSensitive),
+          numericMode(false),
+          ignorePunctuation(false),
+          dirty(true),
+          collator(0)
     { cleanup(); }
 
     ~QCollatorPrivate() { cleanup(); }
diff --git a/src/corelib/tools/qcollator_posix.cpp b/src/corelib/tools/qcollator_posix.cpp
index b47b546d01..89ac4d984c 100644
--- a/src/corelib/tools/qcollator_posix.cpp
+++ b/src/corelib/tools/qcollator_posix.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,47 +42,21 @@ QT_BEGIN_NAMESPACE
 
 void QCollatorPrivate::init()
 {
+    if (locale != QLocale())
+        qWarning("Only default locale supported with the posix collation implementation");
+    if (caseSensitivity != Qt::CaseSensitive)
+        qWarning("Case insensitive sorting unsupported in the posix collation implementation");
+    if (numericMode)
+        qWarning("Numeric mode unsupported in the posix collation implementation");
+    if (ignorePunctuation)
+        qWarning("Ignoring punctuation unsupported in the posix collation implementation");
+    dirty = false;
 }
 
 void QCollatorPrivate::cleanup()
 {
 }
 
-void QCollator::setCaseSensitivity(Qt::CaseSensitivity cs)
-{
-    Q_UNUSED(cs);
-    qWarning("unsupported in the posix collation implementation");
-}
-
-Qt::CaseSensitivity QCollator::caseSensitivity() const
-{
-    qWarning("unsupported in the posix collation implementation");
-    return Qt::CaseSensitive;
-}
-
-void QCollator::setNumericMode(bool on)
-{
-    Q_UNUSED(on);
-    qWarning("unsupported in the posix collation implementation");
-}
-
-bool QCollator::numericMode() const
-{
-    return true;
-}
-
-void QCollator::setIgnorePunctuation(bool on)
-{
-    Q_UNUSED(on);
-    qWarning("unsupported in the posix collation implementation");
-}
-
-bool QCollator::ignorePunctuation() const
-{
-    qWarning("unsupported in the posix collation implementation");
-    return false;
-}
-
 static void stringToWCharArray(QVarLengthArray<wchar_t> &ret, const QString &string)
 {
     ret.resize(string.length());
@@ -112,16 +78,23 @@ int QCollator::compare(const QString &s1, const QString &s2) const
     QVarLengthArray<wchar_t> array1, array2;
     stringToWCharArray(array1, s1);
     stringToWCharArray(array2, s2);
-    return std::wcscoll(array1.constData(), array2.constData());
+    int result = std::wcscoll(array1.constData(), array2.constData());
+    return result > 0 ? 1 : (result == 0 ? 0 : -1);
 }
 
 int QCollator::compare(const QStringRef &s1, const QStringRef &s2) const
 {
+    if (d->dirty)
+        d->init();
+
     return compare(s1.constData(), s1.size(), s2.constData(), s2.size());
 }
 
 QCollatorSortKey QCollator::sortKey(const QString &string) const
 {
+    if (d->dirty)
+        d->init();
+
     QVarLengthArray<wchar_t> original;
     stringToWCharArray(original, string);
     QVector<wchar_t> result(string.size());
@@ -137,8 +110,7 @@ QCollatorSortKey QCollator::sortKey(const QString &string) const
 
 int QCollatorSortKey::compare(const QCollatorSortKey &otherKey) const
 {
-    return std::wcscmp(d->m_key.constData(),
-                  otherKey.d->m_key.constData());
+    return std::wcscmp(d->m_key.constData(), otherKey.d->m_key.constData());
 }
 
 QT_END_NAMESPACE
diff --git a/src/corelib/tools/qcollator_win.cpp b/src/corelib/tools/qcollator_win.cpp
index 4141ba1205..34b80ea9e0 100644
--- a/src/corelib/tools/qcollator_win.cpp
+++ b/src/corelib/tools/qcollator_win.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,90 +42,64 @@
 
 QT_BEGIN_NAMESPACE
 
-void QCollatorPrivate::init()
-{
-    collator = 0;
-}
-
-void QCollatorPrivate::cleanup()
-{
-}
-
-void QCollator::setCaseSensitivity(Qt::CaseSensitivity cs)
-{
-    detach();
-
-    if (cs == Qt::CaseSensitive)
-        d->collator &= ~NORM_IGNORECASE;
-    else
-        d->collator |= NORM_IGNORECASE;
-}
-
-Qt::CaseSensitivity QCollator::caseSensitivity() const
-{
-    return d->collator & NORM_IGNORECASE ? Qt::CaseInsensitive : Qt::CaseSensitive;
-}
-
 //NOTE: SORT_DIGITSASNUMBERS is available since win7
 #ifndef SORT_DIGITSASNUMBERS
 #define SORT_DIGITSASNUMBERS 8
 #endif
-void QCollator::setNumericMode(bool on)
-{
-    if (QSysInfo::windowsVersion() >= QSysInfo::WV_WINDOWS7) {
-        detach();
 
-        if (on)
-            d->collator |= SORT_DIGITSASNUMBERS;
-        else
-            d->collator &= ~SORT_DIGITSASNUMBERS;
-    } else {
-        Q_UNUSED(on);
-        qWarning() << "unsupported in the win collation implementation";
-    }
-}
+// implemented in qlocale_win.cpp
+extern LCID qt_inIsoNametoLCID(const char *name);
 
-bool QCollator::numericMode() const
+void QCollatorPrivate::init()
 {
-    if (QSysInfo::windowsVersion() >= QSysInfo::WV_WINDOWS7) {
-        return bool(d->collator & SORT_DIGITSASNUMBERS);
-    } else {
-        qWarning() << "unsupported in the win collation implementation";
-        return false;
+    collator = 0;
+
+#ifndef USE_COMPARESTRINGEX
+    localeID = qt_inIsoNametoLCID(locale.bcp47Name().toUtf8().constData());
+#else
+    localeName = locale.bcp47Name();
+#endif
+
+    if (caseSensitivity == Qt::CaseInsensitive)
+        collator |= NORM_IGNORECASE;
+
+    if (numericMode) {
+        if (QSysInfo::windowsVersion() >= QSysInfo::WV_WINDOWS7)
+            collator |= SORT_DIGITSASNUMBERS;
+        else
+            qWarning() << "Numeric sorting unsupported on Windows versions older than Windows 7.";
     }
-}
 
-void QCollator::setIgnorePunctuation(bool on)
-{
-    detach();
+    if (ignorePunctuation)
+        collator |= NORM_IGNORESYMBOLS;
 
-    if (on)
-        d->collator |= NORM_IGNORESYMBOLS;
-    else
-        d->collator &= ~NORM_IGNORESYMBOLS;
+    dirty = false;
 }
 
-bool QCollator::ignorePunctuation() const
+void QCollatorPrivate::cleanup()
 {
-    return bool(d->collator & NORM_IGNORESYMBOLS);
 }
 
+
 int QCollator::compare(const QChar *s1, int len1, const QChar *s2, int len2) const
 {
+    if (d->dirty)
+        d->init();
+
     //* from Windows documentation *
     // Returns one of the following values if successful. To maintain the C runtime convention of
     // comparing strings, the value 2 can be subtracted from a nonzero return value. Then, the
     // meaning of <0, ==0, and >0 is consistent with the C runtime.
 
-#ifndef Q_OS_WINRT
-    return CompareString(LOCALE_USER_DEFAULT, d->collator,
+#ifndef USE_COMPARESTRINGEX
+    return CompareString(d->localeID, d->collator,
                          reinterpret_cast<const wchar_t*>(s1), len1,
                          reinterpret_cast<const wchar_t*>(s2), len2) - 2;
-#else // !Q_OS_WINRT
-    return CompareStringEx(LOCALE_NAME_USER_DEFAULT, d->collator,
+#else
+    return CompareStringEx(LPCWSTR(d->localeName.utf16()), d->collator,
                            reinterpret_cast<LPCWSTR>(s1), len1,
                            reinterpret_cast<LPCWSTR>(s2), len2, NULL, NULL, 0) - 2;
-#endif // Q_OS_WINRT
+#endif
 }
 
 int QCollator::compare(const QString &str1, const QString &str2) const
@@ -148,32 +114,29 @@ int QCollator::compare(const QStringRef &s1, const QStringRef &s2) const
 
 QCollatorSortKey QCollator::sortKey(const QString &string) const
 {
-#ifndef Q_OS_WINRT
-    int size = LCMapStringW(LOCALE_USER_DEFAULT, LCMAP_SORTKEY | d->collator,
+    if (d->dirty)
+        d->init();
+
+#ifndef USE_COMPARESTRINGEX
+    int size = LCMapStringW(d->localeID, LCMAP_SORTKEY | d->collator,
                            reinterpret_cast<const wchar_t*>(string.constData()), string.size(),
                            0, 0);
-#elif defined(Q_OS_WINPHONE)
-    int size = 0;
-    Q_UNIMPLEMENTED();
-    Q_UNUSED(string)
-#else // Q_OS_WINPHONE
-    int size = LCMapStringEx(LOCALE_NAME_USER_DEFAULT, LCMAP_SORTKEY | d->collator,
+#else
+    int size = LCMapStringEx(LPCWSTR(d->localeName.utf16()), LCMAP_SORTKEY | d->collator,
                            reinterpret_cast<LPCWSTR>(string.constData()), string.size(),
                            0, 0, NULL, NULL, 0);
-#endif // !Q_OS_WINPHONE
+#endif
     QString ret(size, Qt::Uninitialized);
-#ifndef Q_OS_WINRT
-    int finalSize = LCMapStringW(LOCALE_USER_DEFAULT, LCMAP_SORTKEY | d->collator,
+#ifndef USE_COMPARESTRINGEX
+    int finalSize = LCMapStringW(d->localeID, LCMAP_SORTKEY | d->collator,
                            reinterpret_cast<const wchar_t*>(string.constData()), string.size(),
                            reinterpret_cast<wchar_t*>(ret.data()), ret.size());
-#elif defined(Q_OS_WINPHONE)
-    int finalSize = 0;
-#else // Q_OS_WINPHONE
-    int finalSize = LCMapStringEx(LOCALE_NAME_USER_DEFAULT, LCMAP_SORTKEY | d->collator,
+#else
+    int finalSize = LCMapStringEx(LPCWSTR(d->localeName.utf16()), LCMAP_SORTKEY | d->collator,
                            reinterpret_cast<LPCWSTR>(string.constData()), string.size(),
                            reinterpret_cast<LPWSTR>(ret.data()), ret.size(),
                            NULL, NULL, 0);
-#endif // !Q_OS_WINPHONE
+#endif
     if (finalSize == 0) {
         qWarning() << "there were problems when generating the ::sortKey by LCMapStringW with error:" << GetLastError();
     }
diff --git a/src/corelib/tools/qcommandlineoption.cpp b/src/corelib/tools/qcommandlineoption.cpp
index ccf9211b52..4ba8322dce 100644
--- a/src/corelib/tools/qcommandlineoption.cpp
+++ b/src/corelib/tools/qcommandlineoption.cpp
@@ -6,36 +6,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -96,6 +88,41 @@ public:
 */
 
 /*!
+    Constructs a command line option object with the name \a name.
+
+    The name can be either short or long. If the name is one character in
+    length, it is considered a short name. Option names must not be empty,
+    must not start with a dash or a slash character, must not contain a \c{=}
+    and cannot be repeated.
+
+    \sa setDescription(), setValueName(), setDefaultValues()
+*/
+QCommandLineOption::QCommandLineOption(const QString &name)
+    : d(new QCommandLineOptionPrivate)
+{
+    d->setNames(QStringList(name));
+}
+
+/*!
+    Constructs a command line option object with the names \a names.
+
+    This overload allows to set multiple names for the option, for instance
+    \c{o} and \c{output}.
+
+    The names can be either short or long. Any name in the list that is one
+    character in length is a short name. Option names must not be empty,
+    must not start with a dash or a slash character, must not contain a \c{=}
+    and cannot be repeated.
+
+    \sa setDescription(), setValueName(), setDefaultValues()
+*/
+QCommandLineOption::QCommandLineOption(const QStringList &names)
+    : d(new QCommandLineOptionPrivate)
+{
+    d->setNames(names);
+}
+
+/*!
     Constructs a command line option object with the given arguments.
 
     The name of the option is set to \a name.
@@ -110,6 +137,12 @@ public:
     In addition, the \a valueName can be set if the option expects a value.
     The default value for the option is set to \a defaultValue.
 
+    In Qt versions before 5.4, this constructor was \c explicit. In Qt 5.4
+    and later, it no longer is and can be used for C++11-style uniform
+    initialization:
+
+    \snippet code/src_corelib_tools_qcommandlineoption.cpp cxx11-init
+
     \sa setDescription(), setValueName(), setDefaultValues()
 */
 QCommandLineOption::QCommandLineOption(const QString &name, const QString &description,
@@ -141,6 +174,12 @@ QCommandLineOption::QCommandLineOption(const QString &name, const QString &descr
     In addition, the \a valueName can be set if the option expects a value.
     The default value for the option is set to \a defaultValue.
 
+    In Qt versions before 5.4, this constructor was \c explicit. In Qt 5.4
+    and later, it no longer is and can be used for C++11-style uniform
+    initialization:
+
+    \snippet code/src_corelib_tools_qcommandlineoption.cpp cxx11-init-list
+
     \sa setDescription(), setValueName(), setDefaultValues()
 */
 QCommandLineOption::QCommandLineOption(const QStringList &names, const QString &description,
diff --git a/src/corelib/tools/qcommandlineoption.h b/src/corelib/tools/qcommandlineoption.h
index 49223cda37..cea5880602 100644
--- a/src/corelib/tools/qcommandlineoption.h
+++ b/src/corelib/tools/qcommandlineoption.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,10 +44,12 @@ class QCommandLineOptionPrivate;
 class Q_CORE_EXPORT QCommandLineOption
 {
 public:
-    explicit QCommandLineOption(const QString &name, const QString &description = QString(),
+    explicit QCommandLineOption(const QString &name);
+    explicit QCommandLineOption(const QStringList &names);
+    /*implicit*/ QCommandLineOption(const QString &name, const QString &description,
                                 const QString &valueName = QString(),
                                 const QString &defaultValue = QString());
-    explicit QCommandLineOption(const QStringList &names, const QString &description = QString(),
+    /*implicit*/ QCommandLineOption(const QStringList &names, const QString &description,
                                 const QString &valueName = QString(),
                                 const QString &defaultValue = QString());
     QCommandLineOption(const QCommandLineOption &other);
diff --git a/src/corelib/tools/qcommandlineparser.cpp b/src/corelib/tools/qcommandlineparser.cpp
index 505ab5f46d..c3edba0514 100644
--- a/src/corelib/tools/qcommandlineparser.cpp
+++ b/src/corelib/tools/qcommandlineparser.cpp
@@ -6,36 +6,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -179,6 +171,10 @@ QStringList QCommandLineParserPrivate::aliases(const QString &optionName) const
     Example:
     \snippet code/src_corelib_tools_qcommandlineparser_main.cpp 0
 
+    If your compiler supports the C++11 standard, the three addOption() calls in
+    the above example can be simplified:
+    \snippet code/src_corelib_tools_qcommandlineparser_main.cpp cxx11
+
     Known limitation: the parsing of Qt options inside QCoreApplication and subclasses
     happens before QCommandLineParser exists, so it can't take it into account. This
     means any option value that looks like a builtin Qt option, will be treated by
@@ -342,6 +338,24 @@ bool QCommandLineParser::addOption(const QCommandLineOption &option)
 }
 
 /*!
+    \since 5.4
+
+    Adds the options \a options to look for while parsing.
+
+    Returns \c false if adding any of the options failed; otherwise returns \c false.
+
+    Cf. addOption() for when it may fail.
+*/
+bool QCommandLineParser::addOptions(const QList<QCommandLineOption> &options)
+{
+    // should be optimized (but it's no worse than what was possible before)
+    bool result = true;
+    for (QList<QCommandLineOption>::const_iterator it = options.begin(), end = options.end(); it != end; ++it)
+        result &= addOption(*it);
+    return result;
+}
+
+/*!
     Adds the \c{-v} / \c{--version} option, which displays the version string of the application.
 
     This option is handled automatically by QCommandLineParser.
@@ -495,10 +509,8 @@ void QCommandLineParser::process(const QStringList &arguments)
         ::exit(EXIT_FAILURE);
     }
 
-    if (d->builtinVersionOption && isSet(QStringLiteral("version"))) {
-        printf("%s %s\n", qPrintable(QCoreApplication::applicationName()), qPrintable(QCoreApplication::applicationVersion()));
-        ::exit(EXIT_SUCCESS);
-    }
+    if (d->builtinVersionOption && isSet(QStringLiteral("version")))
+        showVersion();
 
     if (d->builtinHelpOption && isSet(QStringLiteral("help")))
         showHelp(EXIT_SUCCESS);
@@ -888,6 +900,22 @@ QStringList QCommandLineParser::unknownOptionNames() const
 }
 
 /*!
+    Displays the version information from QCoreApplication::applicationVersion(),
+    and exits the application.
+    This is automatically triggered by the --version option, but can also
+    be used to display the version when not using process().
+    The exit code is set to EXIT_SUCCESS (0).
+
+    \sa addVersionOption()
+    \since 5.4
+*/
+Q_NORETURN void QCommandLineParser::showVersion()
+{
+    fprintf(stdout, "%s %s\n", qPrintable(QCoreApplication::applicationName()), qPrintable(QCoreApplication::applicationVersion()));
+    ::exit(EXIT_SUCCESS);
+}
+
+/*!
     Displays the help information, and exits the application.
     This is automatically triggered by the --help option, but can also
     be used to display the help when the user is not invoking the
diff --git a/src/corelib/tools/qcommandlineparser.h b/src/corelib/tools/qcommandlineparser.h
index 5a7061f031..cfd9cc8636 100644
--- a/src/corelib/tools/qcommandlineparser.h
+++ b/src/corelib/tools/qcommandlineparser.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,6 +58,7 @@ public:
     void setSingleDashWordOptionMode(SingleDashWordOptionMode parsingMode);
 
     bool addOption(const QCommandLineOption &commandLineOption);
+    bool addOptions(const QList<QCommandLineOption> &options);
 
     QCommandLineOption addVersionOption();
     QCommandLineOption addHelpOption();
@@ -92,6 +85,7 @@ public:
     QStringList optionNames() const;
     QStringList unknownOptionNames() const;
 
+    Q_NORETURN void showVersion();
     Q_NORETURN void showHelp(int exitCode = 0);
     QString helpText() const;
 
diff --git a/src/corelib/tools/qcontainerfwd.h b/src/corelib/tools/qcontainerfwd.h
index 6b79e40635..5362f8bfeb 100644
--- a/src/corelib/tools/qcontainerfwd.h
+++ b/src/corelib/tools/qcontainerfwd.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qcontiguouscache.cpp b/src/corelib/tools/qcontiguouscache.cpp
index e284ce1e5d..3105333eaa 100644
--- a/src/corelib/tools/qcontiguouscache.cpp
+++ b/src/corelib/tools/qcontiguouscache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -482,7 +474,7 @@ MyRecord record(int row) const
     INT_MAX or prepended before the index position 0.  This is only expected
     to occur in very long lived circular buffer style usage of the
     contiguous cache.  Indexes can be made valid again by calling
-    normalizeIndexs().
+    normalizeIndexes().
 
     \sa normalizeIndexes(), append(), prepend()
 */
diff --git a/src/corelib/tools/qcontiguouscache.h b/src/corelib/tools/qcontiguouscache.h
index e05ef33aa2..b79fe97286 100644
--- a/src/corelib/tools/qcontiguouscache.h
+++ b/src/corelib/tools/qcontiguouscache.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qcryptographichash.cpp b/src/corelib/tools/qcryptographichash.cpp
index c425ee7e09..83d8d44c49 100644
--- a/src/corelib/tools/qcryptographichash.cpp
+++ b/src/corelib/tools/qcryptographichash.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Richard J. Moore <rich@kde.org>.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qcryptographichash.h b/src/corelib/tools/qcryptographichash.h
index c4f7c3ab4a..80234951f4 100644
--- a/src/corelib/tools/qcryptographichash.h
+++ b/src/corelib/tools/qcryptographichash.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Richard J. Moore <rich@kde.org>.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qdatetime.cpp b/src/corelib/tools/qdatetime.cpp
index d6f1d6c942..66d2ad9111 100644
--- a/src/corelib/tools/qdatetime.cpp
+++ b/src/corelib/tools/qdatetime.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -866,9 +858,9 @@ QString QDate::longDayName(int weekday, MonthNameType type)
     Qt::DefaultLocaleLongDate, the string format depends on the
     default application locale. This is the locale set with
     QLocale::setDefault(), or the system locale if no default locale
-    has been set. Identical to calling QLocale().toString(date,
-    QLocale::ShortFormat) or QLocale().toString(date,
-    QLocale::LongFormat).
+    has been set. Identical to calling
+    \l {QLocale::toString()}{QLocale().toString(date, QLocale::ShortFormat) } or
+    \l {QLocale::toString()}{QLocale().toString(date, QLocale::LongFormat)}.
 
     If the \a format is Qt::RFC2822Date, the string is formatted in
     an \l{RFC 2822} compatible way. An example of this formatting is
@@ -1623,9 +1615,10 @@ int QTime::msec() const
     Qt::DefaultLocaleLongDate, the string format depends on the
     default application locale. This is the locale set with
     QLocale::setDefault(), or the system locale if no default locale
-    has been set. Identical to calling QLocale().toString(time,
-    QLocale::ShortFormat) or QLocale().toString(time,
-    QLocale::LongFormat).
+    has been set. Identical to calling
+
+    \l {QLocale::toString()}{QLocale().toString(time, QLocale::ShortFormat)} or
+    \l {QLocale::toString()}{QLocale().toString(time, QLocale::LongFormat)}.
 
     If the \a format is Qt::RFC2822Date, the string is formatted in
     an \l{RFC 2822} compatible way. An example of this formatting is
@@ -3194,7 +3187,7 @@ QTimeZone QDateTime::timeZone() const
         return d->m_timeZone;
     case Qt::UTC:
         if (!d->m_timeZone.isValid())
-            d->m_timeZone = QTimeZone("UTC");
+            d->m_timeZone = QTimeZone(QTimeZonePrivate::utcQByteArray());
         return d->m_timeZone;
     case Qt::TimeZone :
         return d->m_timeZone;
@@ -3254,9 +3247,9 @@ QString QDateTime::timeZoneAbbreviation() const
 {
     switch (d->m_spec) {
     case Qt::UTC:
-        return QStringLiteral("UTC");
+        return QTimeZonePrivate::utcQString();
     case Qt::OffsetFromUTC:
-        return QLatin1String("UTC") + toOffsetString(Qt::ISODate, d->m_offsetFromUtc);
+        return QTimeZonePrivate::utcQString() + toOffsetString(Qt::ISODate, d->m_offsetFromUtc);
     case Qt::TimeZone:
 #ifndef QT_BOOTSTRAPPED
         return d->m_timeZone.d->abbreviation(d->toMSecsSinceEpoch());
@@ -4976,7 +4969,7 @@ QDataStream &operator>>(QDataStream &in, QDateTime &dateTime)
 #if !defined(QT_NO_DEBUG_STREAM) && !defined(QT_NO_DATESTRING)
 QDebug operator<<(QDebug dbg, const QDate &date)
 {
-    dbg.nospace() << "QDate(" << date.toString(QStringLiteral("yyyy-MM-dd")) << ')';
+    dbg.nospace() << "QDate(" << date.toString(Qt::ISODate) << ')';
     return dbg.space();
 }
 
diff --git a/src/corelib/tools/qdatetime.h b/src/corelib/tools/qdatetime.h
index b9f6995155..597655f557 100644
--- a/src/corelib/tools/qdatetime.h
+++ b/src/corelib/tools/qdatetime.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -94,9 +86,9 @@ QT_DEPRECATED inline bool setYMD(int y, int m, int d)
 
     void getDate(int *year, int *month, int *day);
 
-    QDate addDays(qint64 days) const;
-    QDate addMonths(int months) const;
-    QDate addYears(int years) const;
+    QDate addDays(qint64 days) const Q_REQUIRED_RESULT;
+    QDate addMonths(int months) const Q_REQUIRED_RESULT;
+    QDate addYears(int years) const Q_REQUIRED_RESULT;
     qint64 daysTo(const QDate &) const;
 
     bool operator==(const QDate &other) const { return jd == other.jd; }
@@ -157,9 +149,9 @@ public:
 #endif
     bool setHMS(int h, int m, int s, int ms = 0);
 
-    QTime addSecs(int secs) const;
+    QTime addSecs(int secs) const Q_REQUIRED_RESULT;
     int secsTo(const QTime &) const;
-    QTime addMSecs(int ms) const;
+    QTime addMSecs(int ms) const Q_REQUIRED_RESULT;
     int msecsTo(const QTime &) const;
 
     bool operator==(const QTime &other) const { return mds == other.mds; }
@@ -251,11 +243,11 @@ public:
     QString toString(Qt::DateFormat f = Qt::TextDate) const;
     QString toString(const QString &format) const;
 #endif
-    QDateTime addDays(qint64 days) const;
-    QDateTime addMonths(int months) const;
-    QDateTime addYears(int years) const;
-    QDateTime addSecs(qint64 secs) const;
-    QDateTime addMSecs(qint64 msecs) const;
+    QDateTime addDays(qint64 days) const Q_REQUIRED_RESULT;
+    QDateTime addMonths(int months) const Q_REQUIRED_RESULT;
+    QDateTime addYears(int years) const Q_REQUIRED_RESULT;
+    QDateTime addSecs(qint64 secs) const Q_REQUIRED_RESULT;
+    QDateTime addMSecs(qint64 msecs) const Q_REQUIRED_RESULT;
 
     QDateTime toTimeSpec(Qt::TimeSpec spec) const;
     inline QDateTime toLocalTime() const { return toTimeSpec(Qt::LocalTime); }
diff --git a/src/corelib/tools/qdatetime_p.h b/src/corelib/tools/qdatetime_p.h
index 70771844d6..78484f30ed 100644
--- a/src/corelib/tools/qdatetime_p.h
+++ b/src/corelib/tools/qdatetime_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qdatetimeparser.cpp b/src/corelib/tools/qdatetimeparser.cpp
index fb5c5f5943..cad03d9c29 100644
--- a/src/corelib/tools/qdatetimeparser.cpp
+++ b/src/corelib/tools/qdatetimeparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -749,7 +741,6 @@ int QDateTimeParser::parseSection(const QDateTime &currentValue, int sectionInde
             break;
         }
         if (state != Invalid) {
-            QString str = text;
             text.replace(index, used, sectiontext.left(used));
         }
         break; }
@@ -770,7 +761,6 @@ int QDateTimeParser::parseSection(const QDateTime &currentValue, int sectionInde
 
             if (num != -1) {
                 state = (used == sectiontext.size() ? Acceptable : Intermediate);
-                QString str = text;
                 text.replace(index, used, sectiontext.left(used));
             } else {
                 state = Intermediate;
diff --git a/src/corelib/tools/qdatetimeparser_p.h b/src/corelib/tools/qdatetimeparser_p.h
index e2513b43a5..aff80b4cd9 100644
--- a/src/corelib/tools/qdatetimeparser_p.h
+++ b/src/corelib/tools/qdatetimeparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qeasingcurve.cpp b/src/corelib/tools/qeasingcurve.cpp
index 409ebd1de5..0e3375cf21 100644
--- a/src/corelib/tools/qeasingcurve.cpp
+++ b/src/corelib/tools/qeasingcurve.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qeasingcurve.h b/src/corelib/tools/qeasingcurve.h
index 2e65754989..702842eb68 100644
--- a/src/corelib/tools/qeasingcurve.h
+++ b/src/corelib/tools/qeasingcurve.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qelapsedtimer.cpp b/src/corelib/tools/qelapsedtimer.cpp
index 1da85fce96..52875bc9fe 100644
--- a/src/corelib/tools/qelapsedtimer.cpp
+++ b/src/corelib/tools/qelapsedtimer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,7 +77,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet qelapsedtimer/main.cpp 2
 
-    \section1 Reference clocks
+    \section1 Reference Clocks
 
     QElapsedTimer will use the platform's monotonic reference clock in all
     platforms that support it (see QElapsedTimer::isMonotonic()). This has
@@ -202,6 +194,17 @@ QT_BEGIN_NAMESPACE
 */
 
 /*!
+    \fn QElapsedTimer::QElapsedTimer()
+    \since 5.4
+
+    Constructs an invalid QElapsedTimer. A timer becomes valid once it has been
+    started.
+
+    \sa isValid(), start()
+*/
+
+
+/*!
     \fn bool QElapsedTimer::operator ==(const QElapsedTimer &other) const
 
     Returns \c true if this object and \a other contain the same time.
@@ -230,8 +233,8 @@ void QElapsedTimer::invalidate() Q_DECL_NOTHROW
 }
 
 /*!
-    Returns \c false if this object was invalidated by a call to invalidate() and
-    has not been restarted since.
+    Returns \c false if the timer has never been started or invalidated by a
+    call to invalidate().
 
     \sa invalidate(), start(), restart()
 */
diff --git a/src/corelib/tools/qelapsedtimer.h b/src/corelib/tools/qelapsedtimer.h
index b06afe4ab4..d72a50f127 100644
--- a/src/corelib/tools/qelapsedtimer.h
+++ b/src/corelib/tools/qelapsedtimer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,6 +49,13 @@ public:
         MachAbsoluteTime,
         PerformanceCounter
     };
+
+    Q_DECL_CONSTEXPR QElapsedTimer()
+        : t1(Q_INT64_C(0x8000000000000000))
+        , t2(Q_INT64_C(0x8000000000000000))
+    {
+    }
+
     static ClockType clockType() Q_DECL_NOTHROW;
     static bool isMonotonic() Q_DECL_NOTHROW;
 
diff --git a/src/corelib/tools/qelapsedtimer_generic.cpp b/src/corelib/tools/qelapsedtimer_generic.cpp
index 6324be00c0..f1f17b7fe5 100644
--- a/src/corelib/tools/qelapsedtimer_generic.cpp
+++ b/src/corelib/tools/qelapsedtimer_generic.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -87,6 +79,8 @@ void QElapsedTimer::start() Q_DECL_NOTHROW
     and then starting the timer again with start(), but it does so in one
     single operation, avoiding the need to obtain the clock value twice.
 
+    Restarting the timer makes it valid again.
+
     The following example illustrates how to use this function to calibrate a
     parameter to a slow operation (for example, an iteration count) so that
     this operation takes at least 250 milliseconds:
diff --git a/src/corelib/tools/qelapsedtimer_mac.cpp b/src/corelib/tools/qelapsedtimer_mac.cpp
index 19056d1bd9..37ec704f3d 100644
--- a/src/corelib/tools/qelapsedtimer_mac.cpp
+++ b/src/corelib/tools/qelapsedtimer_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qelapsedtimer_unix.cpp b/src/corelib/tools/qelapsedtimer_unix.cpp
index f81a723aa5..5b26d551a7 100644
--- a/src/corelib/tools/qelapsedtimer_unix.cpp
+++ b/src/corelib/tools/qelapsedtimer_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qelapsedtimer_win.cpp b/src/corelib/tools/qelapsedtimer_win.cpp
index a4e33e8201..55c93d6361 100644
--- a/src/corelib/tools/qelapsedtimer_win.cpp
+++ b/src/corelib/tools/qelapsedtimer_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qfreelist.cpp b/src/corelib/tools/qfreelist.cpp
index 74a4f04d66..3087fb2890 100644
--- a/src/corelib/tools/qfreelist.cpp
+++ b/src/corelib/tools/qfreelist.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qfreelist_p.h b/src/corelib/tools/qfreelist_p.h
index ca946cbd8a..bfb03fb723 100644
--- a/src/corelib/tools/qfreelist_p.h
+++ b/src/corelib/tools/qfreelist_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -191,7 +183,7 @@ class QFreeList
     Q_DISABLE_COPY(QFreeList)
 
 public:
-    inline QFreeList();
+    Q_DECL_CONSTEXPR inline QFreeList();
     inline ~QFreeList();
 
     // returns the payload for the given index \a x
@@ -207,7 +199,7 @@ public:
 };
 
 template <typename T, typename ConstantsType>
-inline QFreeList<T, ConstantsType>::QFreeList()
+Q_DECL_CONSTEXPR inline QFreeList<T, ConstantsType>::QFreeList()
     : _next(ConstantsType::InitialNextValue)
 { }
 
diff --git a/src/corelib/tools/qharfbuzz.cpp b/src/corelib/tools/qharfbuzz.cpp
index d5935838ca..0e10210c53 100644
--- a/src/corelib/tools/qharfbuzz.cpp
+++ b/src/corelib/tools/qharfbuzz.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qharfbuzz_p.h b/src/corelib/tools/qharfbuzz_p.h
index 1471fd5712..7476e5cb90 100644
--- a/src/corelib/tools/qharfbuzz_p.h
+++ b/src/corelib/tools/qharfbuzz_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qhash.cpp b/src/corelib/tools/qhash.cpp
index 7200ea7993..fe8c52d103 100644
--- a/src/corelib/tools/qhash.cpp
+++ b/src/corelib/tools/qhash.cpp
@@ -1,42 +1,34 @@
 
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Giuseppe D'Angelo <dangelog@gmail.com>.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -94,13 +86,14 @@ QT_BEGIN_NAMESPACE
     (for instance, gcc 4.4 does that even at -O0).
 */
 
-#ifdef __SSE4_2__
+#if QT_COMPILER_SUPPORTS_HERE(SSE4_2)
 static inline bool hasFastCrc32()
 {
-    return true;
+    return qCpuHasFeature(SSE4_2);
 }
 
 template <typename Char>
+QT_FUNCTION_TARGET(SSE4_2)
 static uint crc32(const Char *ptr, size_t len, uint h)
 {
     // The CRC32 instructions from Nehalem calculate a 32-bit CRC32 checksum
@@ -163,6 +156,11 @@ static inline uint hash(const uchar *p, int len, uint seed) Q_DECL_NOTHROW
     return h;
 }
 
+uint qHashBits(const void *p, size_t len, uint seed) Q_DECL_NOTHROW
+{
+    return hash(static_cast<const uchar*>(p), int(len), seed);
+}
+
 static inline uint hash(const QChar *p, int len, uint seed) Q_DECL_NOTHROW
 {
     uint h = seed;
@@ -669,6 +667,25 @@ void QHashData::checkSanity()
     Types \c T1 and \c T2 must be supported by qHash().
 */
 
+/*! \fn uint qHashBits(const void *p, size_t len, uint seed = 0)
+    \relates QHash
+    \since 5.4
+
+    Returns the hash value for the memory block of size \a len pointed
+    to by \a p, using \a seed to seed the calculation.
+
+    Use this function only to implement qHash() for your own custom
+    types. E.g., here's how you could implement a qHash() overload for
+    std::vector<int>:
+
+    \snippet code/src_corelib_tools_qhash.cpp qhashbits
+
+    It bears repeating that the implementation of qHashBits() - like
+    the qHash() overloads offered by Qt - may change at any time. You
+    \b{must not} rely on the fact that qHashBits() will give the same
+    results (for the same inputs) across different Qt versions.
+*/
+
 /*! \fn uint qHash(char key, uint seed = 0)
     \relates QHash
     \since 5.0
@@ -778,7 +795,7 @@ uint qHash(long double key, uint seed) Q_DECL_NOTHROW
 }
 #endif
 
-/*! \fn uint qHash(QChar key, uint seed = 0)
+/*! \fn uint qHash(const QChar key, uint seed = 0)
     \relates QHash
     \since 5.0
 
@@ -961,8 +978,8 @@ uint qHash(long double key, uint seed) Q_DECL_NOTHROW
 
     A QHash's key type has additional requirements other than being an
     assignable data type: it must provide operator==(), and there must also be
-    a global qHash() function that returns a hash value for an argument of the
-    key's type.
+    a qHash() function in the type's namespace that returns a hash value for an
+    argument of the key's type.
 
     The qHash() function computes a numeric value based on a key. It
     can use any algorithm imaginable, as long as it always returns
@@ -2127,8 +2144,8 @@ uint qHash(long double key, uint seed) Q_DECL_NOTHROW
     QMultiHash's key and value data types must be \l{assignable data
     types}. You cannot, for example, store a QWidget as a value;
     instead, store a QWidget *. In addition, QMultiHash's key type
-    must provide operator==(), and there must also be a global
-    qHash() function that returns a hash value for an argument of the
+    must provide operator==(), and there must also be a qHash() function
+   in the type's namespace that returns a hash value for an argument of the
     key's type. See the QHash documentation for details.
 
     \sa QHash, QHashIterator, QMutableHashIterator, QMultiMap
diff --git a/src/corelib/tools/qhash.h b/src/corelib/tools/qhash.h
index f68b02be2c..59a5251c50 100644
--- a/src/corelib/tools/qhash.h
+++ b/src/corelib/tools/qhash.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,44 +58,40 @@ class QString;
 class QStringRef;
 class QLatin1String;
 
-inline uint qHash(char key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
-inline uint qHash(uchar key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
-inline uint qHash(signed char key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
-inline uint qHash(ushort key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
-inline uint qHash(short key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
-inline uint qHash(uint key, uint seed = 0) Q_DECL_NOTHROW { return key ^ seed; }
-inline uint qHash(int key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
-inline uint qHash(ulong key, uint seed = 0) Q_DECL_NOTHROW
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qHashBits(const void *p, size_t size, uint seed = 0) Q_DECL_NOTHROW;
+
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(char key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(uchar key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(signed char key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(ushort key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(short key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(uint key, uint seed = 0) Q_DECL_NOTHROW { return key ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(int key, uint seed = 0) Q_DECL_NOTHROW { return uint(key) ^ seed; }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(ulong key, uint seed = 0) Q_DECL_NOTHROW
 {
-    if (sizeof(ulong) > sizeof(uint)) {
-        return uint(((key >> (8 * sizeof(uint) - 1)) ^ key) & (~0U)) ^ seed;
-    } else {
-        return uint(key & (~0U)) ^ seed;
-    }
+    return (sizeof(ulong) > sizeof(uint))
+        ? (uint(((key >> (8 * sizeof(uint) - 1)) ^ key) & (~0U)) ^ seed)
+        : (uint(key & (~0U)) ^ seed);
 }
-inline uint qHash(long key, uint seed = 0) Q_DECL_NOTHROW { return qHash(ulong(key), seed); }
-inline uint qHash(quint64 key, uint seed = 0) Q_DECL_NOTHROW
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(long key, uint seed = 0) Q_DECL_NOTHROW { return qHash(ulong(key), seed); }
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(quint64 key, uint seed = 0) Q_DECL_NOTHROW
 {
-    if (sizeof(quint64) > sizeof(uint)) {
-        return uint(((key >> (8 * sizeof(uint) - 1)) ^ key) & (~0U)) ^ seed;
-    } else {
-        return uint(key & (~0U)) ^ seed;
-    }
+    return uint(((key >> (8 * sizeof(uint) - 1)) ^ key) & (~0U)) ^ seed;
 }
-inline uint qHash(qint64 key, uint seed = 0) Q_DECL_NOTHROW { return qHash(quint64(key), seed); }
-Q_CORE_EXPORT uint qHash(float key, uint seed = 0) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qHash(double key, uint seed = 0) Q_DECL_NOTHROW;
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(qint64 key, uint seed = 0) Q_DECL_NOTHROW { return qHash(quint64(key), seed); }
+Q_CORE_EXPORT Q_DECL_CONST_FUNCTION uint qHash(float key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_CONST_FUNCTION uint qHash(double key, uint seed = 0) Q_DECL_NOTHROW;
 #ifndef Q_OS_DARWIN
-Q_CORE_EXPORT uint qHash(long double key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_CONST_FUNCTION uint qHash(long double key, uint seed = 0) Q_DECL_NOTHROW;
 #endif
-inline uint qHash(QChar key, uint seed = 0) Q_DECL_NOTHROW { return qHash(key.unicode(), seed); }
-Q_CORE_EXPORT uint qHash(const QByteArray &key, uint seed = 0) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qHash(const QString &key, uint seed = 0) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qHash(const QStringRef &key, uint seed = 0) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qHash(const QBitArray &key, uint seed = 0) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qHash(QLatin1String key, uint seed = 0) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qt_hash(const QString &key) Q_DECL_NOTHROW;
-Q_CORE_EXPORT uint qt_hash(const QStringRef &key) Q_DECL_NOTHROW;
+Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline uint qHash(const QChar key, uint seed = 0) Q_DECL_NOTHROW { return qHash(key.unicode(), seed); }
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qHash(const QByteArray &key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qHash(const QString &key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qHash(const QStringRef &key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qHash(const QBitArray &key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qHash(QLatin1String key, uint seed = 0) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qt_hash(const QString &key) Q_DECL_NOTHROW;
+Q_CORE_EXPORT Q_DECL_PURE_FUNCTION uint qt_hash(const QStringRef &key) Q_DECL_NOTHROW;
 
 template <class T> inline uint qHash(const T *key, uint seed = 0) Q_DECL_NOTHROW
 {
@@ -221,17 +209,23 @@ private:
     Q_DISABLE_COPY(QHashNode)
 };
 
-template <class Key, class T>
-struct QHashDummyNode
+// Specialize for QHashDummyValue in order to save some memory
+template <class Key>
+struct QHashNode<Key, QHashDummyValue>
 {
-    QHashNode<Key, T> *next;
+    union {
+        QHashNode *next;
+        QHashDummyValue value;
+    };
     const uint h;
     const Key key;
 
-    inline QHashDummyNode(const Key &key0, uint hash, QHashNode<Key, T> *n) : next(n), h(hash), key(key0) {}
+    inline QHashNode(const Key &key0, const QHashDummyValue &, uint hash, QHashNode *n)
+        : next(n), h(hash), key(key0) {}
+    inline bool same_key(uint h0, const Key &key0) const { return h0 == h && key0 == key; }
 
 private:
-    Q_DISABLE_COPY(QHashDummyNode)
+    Q_DISABLE_COPY(QHashNode)
 };
 
 
@@ -280,7 +274,6 @@ Q_HASH_DECLARE_INT_NODES(uint);
 template <class Key, class T>
 class QHash
 {
-    typedef QHashDummyNode<Key, T> DummyNode;
     typedef QHashNode<Key, T> Node;
 
     union {
@@ -293,7 +286,6 @@ class QHash
     }
 
     static inline int alignOfNode() { return qMax<int>(sizeof(void*), Q_ALIGNOF(Node)); }
-    static inline int alignOfDummyNode() { return qMax<int>(sizeof(void*), Q_ALIGNOF(DummyNode)); }
 
 public:
     inline QHash() : d(const_cast<QHashData *>(&QHashData::shared_null)) { }
@@ -301,7 +293,7 @@ public:
     inline QHash(std::initializer_list<std::pair<Key,T> > list)
         : d(const_cast<QHashData *>(&QHashData::shared_null))
     {
-        reserve(list.size());
+        reserve(int(list.size()));
         for (typename std::initializer_list<std::pair<Key,T> >::const_iterator it = list.begin(); it != list.end(); ++it)
             insert(it->first, it->second);
     }
@@ -558,25 +550,14 @@ template <class Key, class T>
 Q_INLINE_TEMPLATE void QHash<Key, T>::duplicateNode(QHashData::Node *node, void *newNode)
 {
     Node *concreteNode = concrete(node);
-    if (QTypeInfo<T>::isDummy) {
-        (void) new (newNode) DummyNode(concreteNode->key, concreteNode->h, 0);
-    } else {
-        (void) new (newNode) Node(concreteNode->key, concreteNode->value, concreteNode->h, 0);
-    }
+    new (newNode) Node(concreteNode->key, concreteNode->value, concreteNode->h, 0);
 }
 
 template <class Key, class T>
 Q_INLINE_TEMPLATE typename QHash<Key, T>::Node *
 QHash<Key, T>::createNode(uint ah, const Key &akey, const T &avalue, Node **anextNode)
 {
-    Node *node;
-
-    if (QTypeInfo<T>::isDummy) {
-        node = reinterpret_cast<Node *>(new (d->allocateNode(alignOfDummyNode())) DummyNode(akey, ah, *anextNode));
-    } else {
-        node = new (d->allocateNode(alignOfNode())) Node(akey, avalue, ah, *anextNode);
-    }
-
+    Node *node = new (d->allocateNode(alignOfNode())) Node(akey, avalue, ah, *anextNode);
     *anextNode = node;
     ++d->size;
     return node;
@@ -609,9 +590,7 @@ Q_INLINE_TEMPLATE void QHash<Key, T>::clear()
 template <class Key, class T>
 Q_OUTOFLINE_TEMPLATE void QHash<Key, T>::detach_helper()
 {
-    QHashData *x = d->detach_helper(duplicateNode, deleteNode2,
-        QTypeInfo<T>::isDummy ? sizeof(DummyNode) : sizeof(Node),
-        QTypeInfo<T>::isDummy ? alignOfDummyNode() : alignOfNode());
+    QHashData *x = d->detach_helper(duplicateNode, deleteNode2, sizeof(Node), alignOfNode());
     if (!d->ref.deref())
         freeData(d);
     d = x;
@@ -793,7 +772,7 @@ Q_INLINE_TEMPLATE typename QHash<Key, T>::iterator QHash<Key, T>::insert(const K
         return iterator(createNode(h, akey, avalue, node));
     }
 
-    if (!QTypeInfo<T>::isDummy)
+    if (!QtPrivate::is_same<T, QHashDummyValue>::value)
         (*node)->value = avalue;
     return iterator(*node);
 }
@@ -962,7 +941,7 @@ Q_OUTOFLINE_TEMPLATE bool QHash<Key, T>::operator==(const QHash<Key, T> &other)
         do {
             if (it2 == other.end() || !(it2.key() == akey))
                 return false;
-            if (!QTypeInfo<T>::isDummy && !(it.value() == it2.value()))
+            if (!(it.value() == it2.value()))
                 return false;
             ++it;
             ++it2;
@@ -979,7 +958,7 @@ public:
 #ifdef Q_COMPILER_INITIALIZER_LISTS
     inline QMultiHash(std::initializer_list<std::pair<Key,T> > list)
     {
-        this->reserve(list.size());
+        this->reserve(int(list.size()));
         for (typename std::initializer_list<std::pair<Key,T> >::const_iterator it = list.begin(); it != list.end(); ++it)
             insert(it->first, it->second);
     }
diff --git a/src/corelib/tools/qiterator.h b/src/corelib/tools/qiterator.h
index 3b86edd750..32d3e5733f 100644
--- a/src/corelib/tools/qiterator.h
+++ b/src/corelib/tools/qiterator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -87,12 +79,9 @@ class QMutable##C##Iterator \
 public: \
     inline QMutable##C##Iterator(Q##C<T> &container) \
         : c(&container) \
-    { c->setSharable(false); i = c->begin(); n = c->end(); } \
-    inline ~QMutable##C##Iterator() \
-    { c->setSharable(true); } \
+    { i = c->begin(); n = c->end(); } \
     inline QMutable##C##Iterator &operator=(Q##C<T> &container) \
-    { c->setSharable(true); c = &container; c->setSharable(false); \
-      i = c->begin(); n = c->end(); return *this; } \
+    { c = &container; i = c->begin(); n = c->end(); return *this; } \
     inline void toFront() { i = c->begin(); n = c->end(); } \
     inline void toBack() { i = c->end(); n = i; } \
     inline bool hasNext() const { return c->constEnd() != const_iterator(i); } \
@@ -160,11 +149,9 @@ class QMutable##C##Iterator \
 public: \
     inline QMutable##C##Iterator(Q##C<Key,T> &container) \
         : c(&container) \
-    { c->setSharable(false); i = c->begin(); n = c->end(); } \
-    inline ~QMutable##C##Iterator() \
-    { c->setSharable(true); } \
+    { i = c->begin(); n = c->end(); } \
     inline QMutable##C##Iterator &operator=(Q##C<Key,T> &container) \
-    { c->setSharable(true); c = &container; c->setSharable(false); i = c->begin(); n = c->end(); return *this; } \
+    { c = &container; i = c->begin(); n = c->end(); return *this; } \
     inline void toFront() { i = c->begin(); n = c->end(); } \
     inline void toBack() { i = c->end(); n = c->end(); } \
     inline bool hasNext() const { return const_iterator(i) != c->constEnd(); } \
diff --git a/src/corelib/tools/qiterator.qdoc b/src/corelib/tools/qiterator.qdoc
index 1ae9c58daa..f140af152d 100644
--- a/src/corelib/tools/qiterator.qdoc
+++ b/src/corelib/tools/qiterator.qdoc
@@ -501,17 +501,6 @@
     \sa operator=()
 */
 
-/*!
-    \fn QMutableListIterator::~QMutableListIterator()
-    \fn QMutableLinkedListIterator::~QMutableLinkedListIterator()
-    \fn QMutableVectorIterator::~QMutableVectorIterator()
-    \fn QMutableSetIterator::~QMutableSetIterator()
-
-    Destroys the iterator.
-
-    \sa operator=()
-*/
-
 /*! \fn QMutableListIterator &QMutableListIterator::operator=(QList<T> &list)
     \fn QMutableLinkedListIterator &QMutableLinkedListIterator::operator=(QLinkedList<T> &list)
     \fn QListIterator &QListIterator::operator=(const QList<T> &list)
@@ -1121,15 +1110,6 @@
     \sa operator=()
 */
 
-/*!
-    \fn QMutableMapIterator::~QMutableMapIterator()
-    \fn QMutableHashIterator::~QMutableHashIterator()
-
-    Destroys the iterator.
-
-    \sa operator=()
-*/
-
 /*! \fn QMapIterator &QMapIterator::operator=(const QMap<Key, T> &map)
     \fn QMutableMapIterator &QMutableMapIterator::operator=(QMap<Key, T> &map)
 
diff --git a/src/corelib/tools/qline.cpp b/src/corelib/tools/qline.cpp
index 990e6bef09..4561f831c8 100644
--- a/src/corelib/tools/qline.cpp
+++ b/src/corelib/tools/qline.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -259,10 +251,11 @@ QT_BEGIN_NAMESPACE
 
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug d, const QLine &p)
+QDebug operator<<(QDebug dbg, const QLine &p)
 {
-    d << "QLine(" << p.p1() << ',' << p.p2() << ')';
-    return d;
+    QDebugStateSaver saver(dbg);
+    dbg.nospace() << "QLine(" << p.p1() << ',' << p.p2() << ')';
+    return dbg;
 }
 #endif
 
@@ -819,10 +812,11 @@ qreal QLineF::angle(const QLineF &l) const
 
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug d, const QLineF &p)
+QDebug operator<<(QDebug dbg, const QLineF &p)
 {
-    d << "QLineF(" << p.p1() << ',' << p.p2() << ')';
-    return d;
+    QDebugStateSaver saver(dbg);
+    dbg.nospace() << "QLineF(" << p.p1() << ',' << p.p2() << ')';
+    return dbg;
 }
 #endif
 
diff --git a/src/corelib/tools/qline.h b/src/corelib/tools/qline.h
index 69e8a8245a..3c8ea23486 100644
--- a/src/corelib/tools/qline.h
+++ b/src/corelib/tools/qline.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,8 +67,8 @@ public:
     inline void translate(const QPoint &p);
     inline void translate(int dx, int dy);
 
-    Q_DECL_CONSTEXPR inline QLine translated(const QPoint &p) const;
-    Q_DECL_CONSTEXPR inline QLine translated(int dx, int dy) const;
+    Q_DECL_CONSTEXPR inline QLine translated(const QPoint &p) const Q_REQUIRED_RESULT;
+    Q_DECL_CONSTEXPR inline QLine translated(int dx, int dy) const Q_REQUIRED_RESULT;
 
     inline void setP1(const QPoint &p1);
     inline void setP2(const QPoint &p2);
@@ -216,7 +208,7 @@ public:
     Q_DECL_CONSTEXPR inline QLineF(qreal x1, qreal y1, qreal x2, qreal y2);
     Q_DECL_CONSTEXPR inline QLineF(const QLine &line) : pt1(line.p1()), pt2(line.p2()) { }
 
-    static QLineF fromPolar(qreal length, qreal angle);
+    static QLineF fromPolar(qreal length, qreal angle) Q_REQUIRED_RESULT;
 
     Q_DECL_CONSTEXPR bool isNull() const;
 
@@ -240,8 +232,8 @@ public:
 
     qreal angleTo(const QLineF &l) const;
 
-    QLineF unitVector() const;
-    Q_DECL_CONSTEXPR inline QLineF normalVector() const;
+    QLineF unitVector() const Q_REQUIRED_RESULT;
+    Q_DECL_CONSTEXPR inline QLineF normalVector() const Q_REQUIRED_RESULT;
 
     // ### Qt 6: rename intersects() or intersection() and rename IntersectType IntersectionType
     IntersectType intersect(const QLineF &l, QPointF *intersectionPoint) const;
@@ -252,8 +244,8 @@ public:
     inline void translate(const QPointF &p);
     inline void translate(qreal dx, qreal dy);
 
-    Q_DECL_CONSTEXPR inline QLineF translated(const QPointF &p) const;
-    Q_DECL_CONSTEXPR inline QLineF translated(qreal dx, qreal dy) const;
+    Q_DECL_CONSTEXPR inline QLineF translated(const QPointF &p) const Q_REQUIRED_RESULT;
+    Q_DECL_CONSTEXPR inline QLineF translated(qreal dx, qreal dy) const Q_REQUIRED_RESULT;
 
     inline void setP1(const QPointF &p1);
     inline void setP2(const QPointF &p2);
diff --git a/src/corelib/tools/qlinkedlist.cpp b/src/corelib/tools/qlinkedlist.cpp
index e967163b8b..ef9d68209d 100644
--- a/src/corelib/tools/qlinkedlist.cpp
+++ b/src/corelib/tools/qlinkedlist.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlinkedlist.h b/src/corelib/tools/qlinkedlist.h
index 3377d1bbc3..0696d3cf54 100644
--- a/src/corelib/tools/qlinkedlist.h
+++ b/src/corelib/tools/qlinkedlist.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlist.cpp b/src/corelib/tools/qlist.cpp
index 0811c3793e..8e2bed7a7c 100644
--- a/src/corelib/tools/qlist.cpp
+++ b/src/corelib/tools/qlist.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -386,8 +378,8 @@ void **QListData::erase(void **xi)
 
     Qt includes a QStringList class that inherits QList\<QString\>
     and adds a few convenience functions, such as QStringList::join()
-    and QStringList::find(). (QString::split() creates QStringLists
-    from strings.)
+    and QStringList::filter().  QString::split() creates QStringLists
+    from strings.
 
     QList stores a list of items. The default constructor creates an
     empty list. To insert items into the list, you can use
@@ -476,6 +468,11 @@ void **QListData::erase(void **xi)
     value that might not be in the valid range, check that it is less
     than the value returned by size() but \e not less than 0.
 
+    \section1 More Members
+
+    If T is a QByteArray, this class has a couple more members that can be
+    used. See the documentation for QByteArrayList for more information.
+
     \sa QListIterator, QMutableListIterator, QLinkedList, QVector
 */
 
@@ -491,11 +488,11 @@ void **QListData::erase(void **xi)
 /*!
     \fn QList<T> QList<T>::mid(int pos, int length) const
 
-    Returns a list whose elements are copied from this list,
+    Returns a sub-list which includes elements from this list,
     starting at position \a pos. If \a length is -1 (the default), all
-    elements from \a pos are copied; otherwise \a length elements (or
+    elements from \a pos are included; otherwise \a length elements (or
     all remaining elements if there are less than \a length elements)
-    are copied.
+    are included.
 */
 
 /*! \fn QList::QList()
diff --git a/src/corelib/tools/qlist.h b/src/corelib/tools/qlist.h
index 9e4ba70908..326a276f40 100644
--- a/src/corelib/tools/qlist.h
+++ b/src/corelib/tools/qlist.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,6 +37,7 @@
 #include <QtCore/qalgorithms.h>
 #include <QtCore/qiterator.h>
 #include <QtCore/qrefcount.h>
+#include <QtCore/qarraydata.h>
 
 #include <iterator>
 #include <list>
@@ -69,6 +62,9 @@ QT_BEGIN_NAMESPACE
 template <typename T> class QVector;
 template <typename T> class QSet;
 
+template <typename T> struct QListSpecialMethods { };
+template <> struct QListSpecialMethods<QByteArray>;
+
 struct Q_CORE_EXPORT QListData {
     struct Data {
         QtPrivate::RefCount ref;
@@ -101,7 +97,7 @@ struct Q_CORE_EXPORT QListData {
 };
 
 template <typename T>
-class QList
+class QList : public QListSpecialMethods<T>
 {
     struct Node { void *v;
 #if defined(Q_CC_BOR)
@@ -129,7 +125,7 @@ public:
 #ifdef Q_COMPILER_INITIALIZER_LISTS
     inline QList(std::initializer_list<T> args)
         : d(const_cast<QListData::Data *>(&QListData::shared_null))
-    { std::copy(args.begin(), args.end(), std::back_inserter(*this)); }
+    { reserve(int(args.size())); std::copy(args.begin(), args.end(), std::back_inserter(*this)); }
 #endif
     bool operator==(const QList<T> &l) const;
     inline bool operator!=(const QList<T> &l) const { return !(*this == l); }
@@ -646,10 +642,17 @@ inline void QList<T>::move(int from, int to)
 template<typename T>
 Q_OUTOFLINE_TEMPLATE QList<T> QList<T>::mid(int pos, int alength) const
 {
-    if (alength < 0 || pos > size() - alength)
-        alength = size() - pos;
-    if (pos == 0 && alength == size())
+    using namespace QtPrivate;
+    switch (QContainerImplHelper::mid(size(), &pos, &alength)) {
+    case QContainerImplHelper::Null:
+    case QContainerImplHelper::Empty:
+        return QList<T>();
+    case QContainerImplHelper::Full:
         return *this;
+    case QContainerImplHelper::Subset:
+        break;
+    }
+
     QList<T> cpy;
     if (alength <= 0)
         return cpy;
@@ -737,7 +740,7 @@ Q_OUTOFLINE_TEMPLATE void QList<T>::detach_helper()
 
 template <typename T>
 Q_OUTOFLINE_TEMPLATE QList<T>::QList(const QList<T> &l)
-    : d(l.d)
+    : QListSpecialMethods<T>(l), d(l.d)
 {
     if (!d->ref.ref()) {
         p.detach(d->alloc);
@@ -763,10 +766,10 @@ Q_OUTOFLINE_TEMPLATE QList<T>::~QList()
 template <typename T>
 Q_OUTOFLINE_TEMPLATE bool QList<T>::operator==(const QList<T> &l) const
 {
-    if (p.size() != l.p.size())
-        return false;
     if (d == l.d)
         return true;
+    if (p.size() != l.p.size())
+        return false;
     Node *i = reinterpret_cast<Node *>(p.end());
     Node *b = reinterpret_cast<Node *>(p.begin());
     Node *li = reinterpret_cast<Node *>(l.p.end());
@@ -944,6 +947,8 @@ Q_DECLARE_MUTABLE_SEQUENTIAL_ITERATOR(List)
 
 QT_END_NAMESPACE
 
+#include <QtCore/qbytearraylist.h>
+
 #ifdef Q_CC_MSVC
 #pragma warning( pop )
 #endif
diff --git a/src/corelib/tools/qlocale.cpp b/src/corelib/tools/qlocale.cpp
index 98e38ca587..a253057435 100644
--- a/src/corelib/tools/qlocale.cpp
+++ b/src/corelib/tools/qlocale.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -2404,6 +2396,13 @@ Qt::LayoutDirection QLocale::textDirection() const
   \since 4.8
 
   Returns an uppercase copy of \a str.
+
+  If Qt Core is using the ICU libraries, they will be used to perform
+  the transformation according to the rules of the current locale.
+  Otherwise the conversion may be done in a platform-dependent manner,
+  with QString::toUpper() as a generic fallback.
+
+  \sa QString::toUpper()
 */
 QString QLocale::toUpper(const QString &str) const
 {
@@ -2421,6 +2420,13 @@ QString QLocale::toUpper(const QString &str) const
   \since 4.8
 
   Returns a lowercase copy of \a str.
+
+  If Qt Core is using the ICU libraries, they will be used to perform
+  the transformation according to the rules of the current locale.
+  Otherwise the conversion may be done in a platform-dependent manner,
+  with QString::toLower() as a generic fallback.
+
+  \sa QString::toLower()
 */
 QString QLocale::toLower(const QString &str) const
 {
diff --git a/src/corelib/tools/qlocale.h b/src/corelib/tools/qlocale.h
index 5a4aaf5cfc..f965ae6562 100644
--- a/src/corelib/tools/qlocale.h
+++ b/src/corelib/tools/qlocale.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_blackberry.cpp b/src/corelib/tools/qlocale_blackberry.cpp
index 0165780634..ef0cd8924f 100644
--- a/src/corelib/tools/qlocale_blackberry.cpp
+++ b/src/corelib/tools/qlocale_blackberry.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_blackberry.h b/src/corelib/tools/qlocale_blackberry.h
index cc186f6c0f..41b89ce27f 100644
--- a/src/corelib/tools/qlocale_blackberry.h
+++ b/src/corelib/tools/qlocale_blackberry.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_data_p.h b/src/corelib/tools/qlocale_data_p.h
index a47a27689b..6571e45b9e 100644
--- a/src/corelib/tools/qlocale_data_p.h
+++ b/src/corelib/tools/qlocale_data_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_icu.cpp b/src/corelib/tools/qlocale_icu.cpp
index 5198cf3e41..df4b337e6d 100644
--- a/src/corelib/tools/qlocale_icu.cpp
+++ b/src/corelib/tools/qlocale_icu.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_p.h b/src/corelib/tools/qlocale_p.h
index 917e83834a..c33ced35d5 100644
--- a/src/corelib/tools/qlocale_p.h
+++ b/src/corelib/tools/qlocale_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -402,6 +394,33 @@ QString qt_readEscapedFormatString(const QString &format, int *idx);
 bool qt_splitLocaleName(const QString &name, QString &lang, QString &script, QString &cntry);
 int qt_repeatCount(const QString &s, int i);
 
+enum { AsciiSpaceMask = (1 << (' ' - 1)) |
+                        (1 << ('\t' - 1)) |   // 9: HT - horizontal tab
+                        (1 << ('\n' - 1)) |   // 10: LF - line feed
+                        (1 << ('\v' - 1)) |   // 11: VT - vertical tab
+                        (1 << ('\f' - 1)) |   // 12: FF - form feed
+                        (1 << ('\r' - 1)) };  // 13: CR - carriage return
+Q_DECL_CONSTEXPR inline bool ascii_isspace(uchar c)
+{
+    return c >= 1U && c <= 32U && (uint(AsciiSpaceMask) >> uint(c - 1)) & 1U;
+}
+
+#if defined(Q_COMPILER_CONSTEXPR)
+Q_STATIC_ASSERT(ascii_isspace(' '));
+Q_STATIC_ASSERT(ascii_isspace('\t'));
+Q_STATIC_ASSERT(ascii_isspace('\n'));
+Q_STATIC_ASSERT(ascii_isspace('\v'));
+Q_STATIC_ASSERT(ascii_isspace('\f'));
+Q_STATIC_ASSERT(ascii_isspace('\r'));
+Q_STATIC_ASSERT(!ascii_isspace('\0'));
+Q_STATIC_ASSERT(!ascii_isspace('\a'));
+Q_STATIC_ASSERT(!ascii_isspace('a'));
+Q_STATIC_ASSERT(!ascii_isspace('\177'));
+Q_STATIC_ASSERT(!ascii_isspace('\200'));
+Q_STATIC_ASSERT(!ascii_isspace('\xA0'));
+Q_STATIC_ASSERT(!ascii_isspace('\377'));
+#endif
+
 QT_END_NAMESPACE
 
 Q_DECLARE_METATYPE(QStringRef)
diff --git a/src/corelib/tools/qlocale_tools.cpp b/src/corelib/tools/qlocale_tools.cpp
index c2bae3df9d..1b246a29de 100644
--- a/src/corelib/tools/qlocale_tools.cpp
+++ b/src/corelib/tools/qlocale_tools.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -243,7 +235,7 @@ qulonglong qstrtoull(const char *nptr, const char **endptr, int base, bool *ok)
     s = nptr;
     do {
         c = *s++;
-    } while (isspace(c));
+    } while (ascii_isspace(c));
     if (c == '-') {
         if (ok != 0)
             *ok = false;
@@ -323,7 +315,7 @@ qlonglong qstrtoll(const char *nptr, const char **endptr, int base, bool *ok)
     s = nptr;
     do {
         c = *s++;
-    } while (isspace(c));
+    } while (ascii_isspace(c));
     if (c == '-') {
         neg = 1;
         c = *s++;
@@ -1468,7 +1460,7 @@ Q_CORE_EXPORT double qstrtod(const char *s00, const char **se, bool *ok)
     rv = 0.;
 
 
-    for(s = s00; isspace(uchar(*s)); s++)
+    for(s = s00; ascii_isspace(uchar(*s)); s++)
         ;
 
     if (*s == '-') {
diff --git a/src/corelib/tools/qlocale_tools_p.h b/src/corelib/tools/qlocale_tools_p.h
index 41183560b9..89147a82ea 100644
--- a/src/corelib/tools/qlocale_tools_p.h
+++ b/src/corelib/tools/qlocale_tools_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_unix.cpp b/src/corelib/tools/qlocale_unix.cpp
index 9ea28895bd..5a444751ba 100644
--- a/src/corelib/tools/qlocale_unix.cpp
+++ b/src/corelib/tools/qlocale_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qlocale_win.cpp b/src/corelib/tools/qlocale_win.cpp
index 4c44016fdf..b8a6f7a0dc 100644
--- a/src/corelib/tools/qlocale_win.cpp
+++ b/src/corelib/tools/qlocale_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1012,6 +1004,32 @@ static const char *winLangCodeToIsoName(int code)
 
 }
 
+LCID qt_inIsoNametoLCID(const char *name)
+{
+    // handle norwegian manually, the list above will fail
+    if (!strncmp(name, "nb", 2))
+        return 0x0414;
+    else if (!strncmp(name, "nn", 2))
+        return 0x0814;
+
+    char n[64];
+    strncpy(n, name, sizeof(n));
+    n[sizeof(n)-1] = 0;
+    char *c = n;
+    while (*c) {
+        if (*c == '-')
+            *c = '_';
+        ++c;
+    }
+
+    for (int i = 0; i < windows_to_iso_count; ++i) {
+        if (!strcmp(n, windows_to_iso_list[i].iso_name))
+            return windows_to_iso_list[i].windows_code;
+    }
+    return LOCALE_USER_DEFAULT;
+}
+
+
 #ifndef Q_OS_WINRT
 static QString winIso639LangName(LCID id)
 #else
diff --git a/src/corelib/tools/qmap.cpp b/src/corelib/tools/qmap.cpp
index 22d744f869..38b4c0ad7e 100644
--- a/src/corelib/tools/qmap.cpp
+++ b/src/corelib/tools/qmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qmap.h b/src/corelib/tools/qmap.h
index d7bd9c739c..a776e2eb4d 100644
--- a/src/corelib/tools/qmap.h
+++ b/src/corelib/tools/qmap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qmargins.cpp b/src/corelib/tools/qmargins.cpp
index 6f2c6c2c7c..419551aaca 100644
--- a/src/corelib/tools/qmargins.cpp
+++ b/src/corelib/tools/qmargins.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qmargins.h b/src/corelib/tools/qmargins.h
index d96ccaccae..33a2766345 100644
--- a/src/corelib/tools/qmargins.h
+++ b/src/corelib/tools/qmargins.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qmessageauthenticationcode.cpp b/src/corelib/tools/qmessageauthenticationcode.cpp
index 2eeebed6cd..d74eb3b934 100644
--- a/src/corelib/tools/qmessageauthenticationcode.cpp
+++ b/src/corelib/tools/qmessageauthenticationcode.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qmessageauthenticationcode.h b/src/corelib/tools/qmessageauthenticationcode.h
index 77c22152e4..3f17fb85b5 100644
--- a/src/corelib/tools/qmessageauthenticationcode.h
+++ b/src/corelib/tools/qmessageauthenticationcode.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qpair.h b/src/corelib/tools/qpair.h
index 9b8691a3d8..b2217e4dd0 100644
--- a/src/corelib/tools/qpair.h
+++ b/src/corelib/tools/qpair.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,18 +45,18 @@ struct QPair
     typedef T1 first_type;
     typedef T2 second_type;
 
-    QPair() : first(), second() {}
-    QPair(const T1 &t1, const T2 &t2) : first(t1), second(t2) {}
+    Q_DECL_CONSTEXPR QPair() : first(), second() {}
+    Q_DECL_CONSTEXPR QPair(const T1 &t1, const T2 &t2) : first(t1), second(t2) {}
     // compiler-generated copy/move ctor/assignment operators are fine!
 
     template <typename TT1, typename TT2>
-    QPair(const QPair<TT1, TT2> &p) : first(p.first), second(p.second) {}
+    Q_DECL_CONSTEXPR QPair(const QPair<TT1, TT2> &p) : first(p.first), second(p.second) {}
     template <typename TT1, typename TT2>
     QPair &operator=(const QPair<TT1, TT2> &p)
     { first = p.first; second = p.second; return *this; }
 #ifdef Q_COMPILER_RVALUE_REFS
     template <typename TT1, typename TT2>
-    QPair(QPair<TT1, TT2> &&p) : first(std::move(p.first)), second(std::move(p.second)) {}
+    Q_DECL_CONSTEXPR QPair(QPair<TT1, TT2> &&p) : first(std::move(p.first)), second(std::move(p.second)) {}
     template <typename TT1, typename TT2>
     QPair &operator=(QPair<TT1, TT2> &&p)
     { first = std::move(p.first); second = std::move(p.second); return *this; }
@@ -80,39 +72,39 @@ template<class T1, class T2>
 class QTypeInfo<QPair<T1, T2> > : public QTypeInfoMerger<QPair<T1, T2>, T1, T2> {}; // Q_DECLARE_TYPEINFO
 
 template <class T1, class T2>
-Q_INLINE_TEMPLATE bool operator==(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
+Q_DECL_CONSTEXPR Q_INLINE_TEMPLATE bool operator==(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
 { return p1.first == p2.first && p1.second == p2.second; }
 
 template <class T1, class T2>
-Q_INLINE_TEMPLATE bool operator!=(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
+Q_DECL_CONSTEXPR Q_INLINE_TEMPLATE bool operator!=(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
 { return !(p1 == p2); }
 
 template <class T1, class T2>
-Q_INLINE_TEMPLATE bool operator<(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
+Q_DECL_CONSTEXPR Q_INLINE_TEMPLATE bool operator<(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
 {
     return p1.first < p2.first || (!(p2.first < p1.first) && p1.second < p2.second);
 }
 
 template <class T1, class T2>
-Q_INLINE_TEMPLATE bool operator>(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
+Q_DECL_CONSTEXPR Q_INLINE_TEMPLATE bool operator>(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
 {
     return p2 < p1;
 }
 
 template <class T1, class T2>
-Q_INLINE_TEMPLATE bool operator<=(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
+Q_DECL_CONSTEXPR Q_INLINE_TEMPLATE bool operator<=(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
 {
     return !(p2 < p1);
 }
 
 template <class T1, class T2>
-Q_INLINE_TEMPLATE bool operator>=(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
+Q_DECL_CONSTEXPR Q_INLINE_TEMPLATE bool operator>=(const QPair<T1, T2> &p1, const QPair<T1, T2> &p2)
 {
     return !(p1 < p2);
 }
 
 template <class T1, class T2>
-Q_OUTOFLINE_TEMPLATE QPair<T1, T2> qMakePair(const T1 &x, const T2 &y)
+Q_DECL_CONSTEXPR Q_OUTOFLINE_TEMPLATE QPair<T1, T2> qMakePair(const T1 &x, const T2 &y)
 {
     return QPair<T1, T2>(x, y);
 }
diff --git a/src/corelib/tools/qpodlist_p.h b/src/corelib/tools/qpodlist_p.h
index cfe4cab9ae..dd019ec491 100644
--- a/src/corelib/tools/qpodlist_p.h
+++ b/src/corelib/tools/qpodlist_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qpoint.cpp b/src/corelib/tools/qpoint.cpp
index 1063cda52b..ab5f30024b 100644
--- a/src/corelib/tools/qpoint.cpp
+++ b/src/corelib/tools/qpoint.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -452,15 +444,18 @@ QDataStream &operator>>(QDataStream &s, QPoint &p)
 */
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug dbg, const QPoint &p) {
+QDebug operator<<(QDebug dbg, const QPoint &p)
+{
+    QDebugStateSaver saver(dbg);
     dbg.nospace() << "QPoint(" << p.x() << ',' << p.y() << ')';
-    return dbg.space();
+    return dbg;
 }
 
-QDebug operator<<(QDebug d, const QPointF &p)
+QDebug operator<<(QDebug dbg, const QPointF &p)
 {
-    d.nospace() << "QPointF(" << p.x() << ", " << p.y() << ')';
-    return d.space();
+    QDebugStateSaver saver(dbg);
+    dbg.nospace() << "QPointF(" << p.x() << ',' << p.y() << ')';
+    return dbg;
 }
 #endif
 
diff --git a/src/corelib/tools/qpoint.h b/src/corelib/tools/qpoint.h
index 69403ebc53..5cf97b9052 100644
--- a/src/corelib/tools/qpoint.h
+++ b/src/corelib/tools/qpoint.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qqueue.cpp b/src/corelib/tools/qqueue.cpp
index 67d7cd1557..fa384dc6f0 100644
--- a/src/corelib/tools/qqueue.cpp
+++ b/src/corelib/tools/qqueue.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qqueue.h b/src/corelib/tools/qqueue.h
index b83021434e..de67680478 100644
--- a/src/corelib/tools/qqueue.h
+++ b/src/corelib/tools/qqueue.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qrect.cpp b/src/corelib/tools/qrect.cpp
index 382793f175..dc46f85fb5 100644
--- a/src/corelib/tools/qrect.cpp
+++ b/src/corelib/tools/qrect.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -284,7 +276,7 @@ QT_BEGIN_NAMESPACE
 
     Returns \c true if the rectangle is valid, otherwise returns \c false.
 
-    A valid rectangle has a left() < right() and top() <
+    A valid rectangle has a left() <= right() and top() <=
     bottom(). Note that non-trivial operations like intersections are
     not defined for invalid rectangles. A valid rectangle is not empty
     (i.e., isValid() == !isEmpty()).
@@ -1286,10 +1278,12 @@ QDataStream &operator>>(QDataStream &s, QRect &r)
 
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug dbg, const QRect &r) {
+QDebug operator<<(QDebug dbg, const QRect &r)
+{
+    QDebugStateSaver saver(dbg);
     dbg.nospace() << "QRect(" << r.x() << ',' << r.y() << ' '
                   << r.width() << 'x' << r.height() << ')';
-    return dbg.space();
+    return dbg;
 }
 #endif
 
@@ -2493,10 +2487,12 @@ QDataStream &operator>>(QDataStream &s, QRectF &r)
 
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug dbg, const QRectF &r) {
+QDebug operator<<(QDebug dbg, const QRectF &r)
+{
+    QDebugStateSaver saver(dbg);
     dbg.nospace() << "QRectF(" << r.x() << ',' << r.y() << ' '
                   << r.width() << 'x' << r.height() << ')';
-    return dbg.space();
+    return dbg;
 }
 #endif
 
diff --git a/src/corelib/tools/qrect.h b/src/corelib/tools/qrect.h
index 2bb74e8221..b5be5724af 100644
--- a/src/corelib/tools/qrect.h
+++ b/src/corelib/tools/qrect.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,7 +60,7 @@ public:
     Q_DECL_CONSTEXPR inline int top() const;
     Q_DECL_CONSTEXPR inline int right() const;
     Q_DECL_CONSTEXPR inline int bottom() const;
-    QRect normalized() const;
+    QRect normalized() const Q_REQUIRED_RESULT;
 
     Q_DECL_CONSTEXPR inline int x() const;
     Q_DECL_CONSTEXPR inline int y() const;
@@ -102,8 +94,8 @@ public:
 
     inline void translate(int dx, int dy);
     inline void translate(const QPoint &p);
-    Q_DECL_CONSTEXPR inline QRect translated(int dx, int dy) const;
-    Q_DECL_CONSTEXPR inline QRect translated(const QPoint &p) const;
+    Q_DECL_CONSTEXPR inline QRect translated(int dx, int dy) const Q_REQUIRED_RESULT;
+    Q_DECL_CONSTEXPR inline QRect translated(const QPoint &p) const Q_REQUIRED_RESULT;
 
     inline void moveTo(int x, int t);
     inline void moveTo(const QPoint &p);
@@ -115,7 +107,7 @@ public:
     inline void getCoords(int *x1, int *y1, int *x2, int *y2) const;
 
     inline void adjust(int x1, int y1, int x2, int y2);
-    Q_DECL_CONSTEXPR inline QRect adjusted(int x1, int y1, int x2, int y2) const;
+    Q_DECL_CONSTEXPR inline QRect adjusted(int x1, int y1, int x2, int y2) const Q_REQUIRED_RESULT;
 
     Q_DECL_CONSTEXPR inline QSize size() const;
     Q_DECL_CONSTEXPR inline int width() const;
@@ -133,8 +125,8 @@ public:
     bool contains(const QPoint &p, bool proper=false) const;
     inline bool contains(int x, int y) const;
     inline bool contains(int x, int y, bool proper) const;
-    inline QRect united(const QRect &other) const;
-    inline QRect intersected(const QRect &other) const;
+    inline QRect united(const QRect &other) const Q_REQUIRED_RESULT;
+    inline QRect intersected(const QRect &other) const Q_REQUIRED_RESULT;
     bool intersects(const QRect &r) const;
 
     Q_DECL_CONSTEXPR inline QRect marginsAdded(const QMargins &margins) const;
@@ -143,8 +135,8 @@ public:
     inline QRect &operator-=(const QMargins &margins);
 
 #if QT_DEPRECATED_SINCE(5, 0)
-    QT_DEPRECATED QRect unite(const QRect &r) const { return united(r); }
-    QT_DEPRECATED QRect intersect(const QRect &r) const { return intersected(r); }
+    QT_DEPRECATED QRect unite(const QRect &r) const Q_REQUIRED_RESULT { return united(r); }
+    QT_DEPRECATED QRect intersect(const QRect &r) const Q_REQUIRED_RESULT { return intersected(r); }
 #endif
 
     friend Q_DECL_CONSTEXPR inline bool operator==(const QRect &, const QRect &);
@@ -510,7 +502,7 @@ public:
     Q_DECL_CONSTEXPR inline bool isNull() const;
     Q_DECL_CONSTEXPR inline bool isEmpty() const;
     Q_DECL_CONSTEXPR inline bool isValid() const;
-    QRectF normalized() const;
+    QRectF normalized() const Q_REQUIRED_RESULT;
 
     Q_DECL_CONSTEXPR inline qreal left() const { return xp; }
     Q_DECL_CONSTEXPR inline qreal top() const { return yp; }
@@ -550,8 +542,8 @@ public:
     inline void translate(qreal dx, qreal dy);
     inline void translate(const QPointF &p);
 
-    Q_DECL_CONSTEXPR inline QRectF translated(qreal dx, qreal dy) const;
-    Q_DECL_CONSTEXPR inline QRectF translated(const QPointF &p) const;
+    Q_DECL_CONSTEXPR inline QRectF translated(qreal dx, qreal dy) const Q_REQUIRED_RESULT;
+    Q_DECL_CONSTEXPR inline QRectF translated(const QPointF &p) const Q_REQUIRED_RESULT;
 
     inline void moveTo(qreal x, qreal y);
     inline void moveTo(const QPointF &p);
@@ -563,7 +555,7 @@ public:
     inline void getCoords(qreal *x1, qreal *y1, qreal *x2, qreal *y2) const;
 
     inline void adjust(qreal x1, qreal y1, qreal x2, qreal y2);
-    Q_DECL_CONSTEXPR inline QRectF adjusted(qreal x1, qreal y1, qreal x2, qreal y2) const;
+    Q_DECL_CONSTEXPR inline QRectF adjusted(qreal x1, qreal y1, qreal x2, qreal y2) const Q_REQUIRED_RESULT;
 
     Q_DECL_CONSTEXPR inline QSizeF size() const;
     Q_DECL_CONSTEXPR inline qreal width() const;
@@ -580,8 +572,8 @@ public:
     bool contains(const QRectF &r) const;
     bool contains(const QPointF &p) const;
     inline bool contains(qreal x, qreal y) const;
-    inline QRectF united(const QRectF &other) const;
-    inline QRectF intersected(const QRectF &other) const;
+    inline QRectF united(const QRectF &other) const Q_REQUIRED_RESULT;
+    inline QRectF intersected(const QRectF &other) const Q_REQUIRED_RESULT;
     bool intersects(const QRectF &r) const;
 
     Q_DECL_CONSTEXPR inline QRectF marginsAdded(const QMarginsF &margins) const;
@@ -590,15 +582,15 @@ public:
     inline QRectF &operator-=(const QMarginsF &margins);
 
 #if QT_DEPRECATED_SINCE(5, 0)
-    QT_DEPRECATED QRectF unite(const QRectF &r) const { return united(r); }
-    QT_DEPRECATED QRectF intersect(const QRectF &r) const { return intersected(r); }
+    QT_DEPRECATED QRectF unite(const QRectF &r) const Q_REQUIRED_RESULT { return united(r); }
+    QT_DEPRECATED QRectF intersect(const QRectF &r) const Q_REQUIRED_RESULT { return intersected(r); }
 #endif
 
     friend Q_DECL_CONSTEXPR inline bool operator==(const QRectF &, const QRectF &);
     friend Q_DECL_CONSTEXPR inline bool operator!=(const QRectF &, const QRectF &);
 
-    Q_DECL_CONSTEXPR inline QRect toRect() const;
-    QRect toAlignedRect() const;
+    Q_DECL_CONSTEXPR inline QRect toRect() const Q_REQUIRED_RESULT;
+    QRect toAlignedRect() const Q_REQUIRED_RESULT;
 
 private:
     qreal xp;
diff --git a/src/corelib/tools/qrefcount.cpp b/src/corelib/tools/qrefcount.cpp
index 5cd8b34406..026ced7fd8 100644
--- a/src/corelib/tools/qrefcount.cpp
+++ b/src/corelib/tools/qrefcount.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qrefcount.h b/src/corelib/tools/qrefcount.h
index 3a8f0f3982..65a8e74715 100644
--- a/src/corelib/tools/qrefcount.h
+++ b/src/corelib/tools/qrefcount.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qregexp.cpp b/src/corelib/tools/qregexp.cpp
index fbcd271f1d..b679377fc0 100644
--- a/src/corelib/tools/qregexp.cpp
+++ b/src/corelib/tools/qregexp.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qregexp.h b/src/corelib/tools/qregexp.h
index 115fceb18b..c01735a5c1 100644
--- a/src/corelib/tools/qregexp.h
+++ b/src/corelib/tools/qregexp.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qregularexpression.cpp b/src/corelib/tools/qregularexpression.cpp
index 257141efdc..33894927fe 100644
--- a/src/corelib/tools/qregularexpression.cpp
+++ b/src/corelib/tools/qregularexpression.cpp
@@ -2,41 +2,33 @@
 **
 ** Copyright (C) 2012 Giuseppe D'Angelo <dangelog@gmail.com>.
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,6 +45,7 @@
 #include <QtCore/qthreadstorage.h>
 #include <QtCore/qglobal.h>
 #include <QtCore/qatomic.h>
+#include <QtCore/qdatastream.h>
 
 #include <pcre.h>
 
@@ -145,7 +138,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet code/src_corelib_tools_qregularexpression.cpp 3
 
-    \section1 Pattern options
+    \section1 Pattern Options
 
     The meaning of the pattern string can be modified by setting one or more
     \e{pattern options}. For instance, it is possible to set a pattern to match
@@ -169,7 +162,7 @@ QT_BEGIN_NAMESPACE
     Please refer to the QRegularExpression::PatternOption enum documentation for
     more information about each pattern option.
 
-    \section1 Match type and match options
+    \section1 Match Type and Match Options
 
     The last two arguments of the match() and the globalMatch() functions set
     the match type and the match options. The match type is a value of the
@@ -184,7 +177,7 @@ QT_BEGIN_NAMESPACE
     QRegularExpression::MatchOption enum documentation for more details.
 
     \target normal matching
-    \section1 Normal matching
+    \section1 Normal Matching
 
     In order to perform a match you can simply invoke the match() function
     passing a string to match against. We refer to this string as the
@@ -234,7 +227,7 @@ QT_BEGIN_NAMESPACE
     \snippet code/src_corelib_tools_qregularexpression.cpp 12
 
     \target global matching
-    \section1 Global matching
+    \section1 Global Matching
 
     \e{Global matching} is useful to find all the occurrences of a given
     regular expression inside a subject string. Suppose that we want to extract
@@ -264,7 +257,7 @@ QT_BEGIN_NAMESPACE
     the globalMatch() function, exactly like normal matching with match().
 
     \target partial matching
-    \section1 Partial matching
+    \section1 Partial Matching
 
     A \e{partial match} is obtained when the end of the subject string is
     reached, but more characters are needed to successfully complete the match.
@@ -403,7 +396,7 @@ QT_BEGIN_NAMESPACE
     text) would have been \c{"abcabc"}; by matching only against the leading
     \c{"abc"} we instead get a partial match.
 
-    \section1 Error handling
+    \section1 Error Handling
 
     It is possible for a QRegularExpression object to be invalid because of
     syntax errors in the pattern string. The isValid() function will return
@@ -422,7 +415,7 @@ QT_BEGIN_NAMESPACE
     its \l{QRegularExpressionMatch::}{isValid()} function will return false).
     The same applies for attempting a global match.
 
-    \section1 Unsupported Perl-compatible regular expressions features
+    \section1 Unsupported Perl-compatible Regular Expressions Features
 
     QRegularExpression does not support all the features available in
     Perl-compatible regular expressions. The most notable one is the fact that
@@ -431,7 +424,7 @@ QT_BEGIN_NAMESPACE
 
     This may change in a future version of Qt.
 
-    \section1 Notes for QRegExp users
+    \section1 Notes for QRegExp Users
 
     The QRegularExpression class introduced in Qt 5 is a big improvement upon
     QRegExp, in terms of APIs offered, supported pattern syntax and speed of
@@ -524,7 +517,7 @@ QT_BEGIN_NAMESPACE
     QRegExp::CaretAtOffset behaviour. There is no equivalent for the other
     QRegExp::CaretMode modes.
 
-    \section1 Debugging code that uses QRegularExpression
+    \section1 Debugging Code that Uses QRegularExpression
 
     QRegularExpression internally uses a just in time compiler (JIT) to
     optimize the execution of the matching algorithm. The JIT makes extensive
@@ -701,6 +694,23 @@ QT_BEGIN_NAMESPACE
         \c{\w} to match any character with either the Unicode L (letter) or N
         (digit) property, plus underscore, and so on. This option corresponds
         to the \c{/u} modifier in Perl regular expressions.
+
+    \value OptimizeOnFirstUsageOption
+        The regular expression will be optimized (and possibly
+        JIT-compiled) on its first usage, instead of after a certain (undefined)
+        number of usages. See also \l{QRegularExpression::}{optimize()}.
+        This enum value has been introduced in Qt 5.4.
+
+    \value DontAutomaticallyOptimizeOption
+        Regular expressions are automatically optimized after a
+        certain number of usages; setting this option prevents such
+        optimizations, therefore avoiding possible unpredictable spikes in
+        CPU and memory usage. If both this option and the
+        \c{OptimizeOnFirstUsageOption} option are set, then this option takes
+        precedence. Note: this option will still let the regular expression
+        to be optimized by manually calling
+        \l{QRegularExpression::}{optimize()}. This enum value has been
+        introduced in Qt 5.4.
 */
 
 /*!
@@ -748,6 +758,13 @@ QT_BEGIN_NAMESPACE
         The match is constrained to start exactly at the offset passed to
         match() in order to be successful, even if the pattern string does not
         contain any metacharacter that anchors the match at that point.
+
+    \value DontCheckSubjectStringMatchOption
+        The subject string is not checked for UTF-16 validity before
+        attempting a match. Use this option with extreme caution, as
+        attempting to match an invalid string may crash the program and/or
+        constitute a security issue. This enum value has been introduced in
+        Qt 5.4.
 */
 
 // after how many usages we optimize the regexp
@@ -804,13 +821,24 @@ struct QRegularExpressionPrivate : QSharedData
     void cleanCompiledPattern();
     void compilePattern();
     void getPatternInfo();
-    void optimizePattern();
+
+    enum OptimizePatternOption {
+        LazyOptimizeOption,
+        ImmediateOptimizeOption
+    };
+
+    void optimizePattern(OptimizePatternOption option);
+
+    enum CheckSubjectStringOption {
+        CheckSubjectString,
+        DontCheckSubjectString
+    };
 
     QRegularExpressionMatchPrivate *doMatch(const QString &subject,
                                             int offset,
                                             QRegularExpression::MatchType matchType,
                                             QRegularExpression::MatchOptions matchOptions,
-                                            bool checkSubjectString = true,
+                                            CheckSubjectStringOption checkSubjectStringOption = CheckSubjectString,
                                             const QRegularExpressionMatchPrivate *previous = 0) const;
 
     int captureIndexForName(const QString &name) const;
@@ -1098,7 +1126,10 @@ static bool isJitEnabled()
     setting the studyData member variable to the result of the study. It gets
     called by doMatch() every time a match is performed. As of now, the
     optimizations on the pattern are performed after a certain number of usages
-    (i.e. the qt_qregularexpression_optimize_after_use_count constant).
+    (i.e. the qt_qregularexpression_optimize_after_use_count constant) unless
+    the DontAutomaticallyOptimizeOption option is set on the QRegularExpression
+    object, or anyhow by calling optimize() (which will pass
+    ImmediateOptimizeOption).
 
     Notice that although the method is protected by a mutex, one thread may
     invoke this function and return immediately (i.e. not study the pattern,
@@ -1109,20 +1140,23 @@ static bool isJitEnabled()
     (localStudyData) before using storeRelease on studyData. In doMatch there's
     the corresponding loadAcquire.
 */
-void QRegularExpressionPrivate::optimizePattern()
+void QRegularExpressionPrivate::optimizePattern(OptimizePatternOption option)
 {
     Q_ASSERT(compiledPattern);
 
     QMutexLocker lock(&mutex);
 
-    if (studyData.load() || (++usedCount != qt_qregularexpression_optimize_after_use_count))
+    if (studyData.load()) // already optimized
+        return;
+
+    if ((option == LazyOptimizeOption) && (++usedCount != qt_qregularexpression_optimize_after_use_count))
         return;
 
     static const bool enableJit = isJitEnabled();
 
     int studyOptions = 0;
     if (enableJit)
-        studyOptions |= PCRE_STUDY_JIT_COMPILE;
+        studyOptions |= (PCRE_STUDY_JIT_COMPILE | PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE | PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE);
 
     const char *err;
     pcre16_extra * const localStudyData = pcre16_study(compiledPattern, studyOptions, &err);
@@ -1189,7 +1223,9 @@ static int pcre16SafeExec(const pcre16 *code, const pcre16_extra *extra,
     options \a matchOptions and returns the QRegularExpressionMatchPrivate of
     the result. It also advances a match if a previous result is given as \a
     previous. The \a subject string goes a Unicode validity check if
-    \a checkSubjectString is true (PCRE doesn't like illegal UTF-16 sequences).
+    \a checkSubjectString is CheckSubjectString and the match options don't
+    include DontCheckSubjectStringMatchOption (PCRE doesn't like illegal
+    UTF-16 sequences).
 
     Advancing a match is a tricky algorithm. If the previous match matched a
     non-empty string, we just do an ordinary match at the offset position.
@@ -1206,7 +1242,7 @@ QRegularExpressionMatchPrivate *QRegularExpressionPrivate::doMatch(const QString
                                                                    int offset,
                                                                    QRegularExpression::MatchType matchType,
                                                                    QRegularExpression::MatchOptions matchOptions,
-                                                                   bool checkSubjectString,
+                                                                   CheckSubjectStringOption checkSubjectStringOption,
                                                                    const QRegularExpressionMatchPrivate *previous) const
 {
     if (offset < 0)
@@ -1235,8 +1271,15 @@ QRegularExpressionMatchPrivate *QRegularExpressionPrivate::doMatch(const QString
                                                                               matchType, matchOptions,
                                                                               capturingCount + 1);
 
-    // this is mutex protected
-    const_cast<QRegularExpressionPrivate *>(this)->optimizePattern();
+    if (!(patternOptions & QRegularExpression::DontAutomaticallyOptimizeOption)) {
+        const OptimizePatternOption optimizePatternOption =
+                (patternOptions & QRegularExpression::OptimizeOnFirstUsageOption)
+                    ? ImmediateOptimizeOption
+                    : LazyOptimizeOption;
+
+        // this is mutex protected
+        const_cast<QRegularExpressionPrivate *>(this)->optimizePattern(optimizePatternOption);
+    }
 
     // work with a local copy of the study data, as we are running pcre_exec
     // potentially more than once, and we don't want to run call it
@@ -1250,8 +1293,10 @@ QRegularExpressionMatchPrivate *QRegularExpressionPrivate::doMatch(const QString
     else if (matchType == QRegularExpression::PartialPreferFirstMatch)
         pcreOptions |= PCRE_PARTIAL_HARD;
 
-    if (!checkSubjectString)
+    if (checkSubjectStringOption == DontCheckSubjectString
+            || matchOptions & QRegularExpression::DontCheckSubjectStringMatchOption) {
         pcreOptions |= PCRE_NO_UTF16_CHECK;
+    }
 
     bool previousMatchWasEmpty = false;
     if (previous && previous->hasMatch &&
@@ -1362,7 +1407,7 @@ QRegularExpressionMatch QRegularExpressionMatchPrivate::nextMatch() const
     Q_ASSERT(isValid);
     Q_ASSERT(hasMatch || hasPartialMatch);
 
-    // Note the "false" passed for the check of the subject string:
+    // Note the DontCheckSubjectString passed for the check of the subject string:
     // if we're advancing a match on the same subject,
     // then that subject was already checked at least once (when this object
     // was created, or when the object that created this one was created, etc.)
@@ -1370,7 +1415,7 @@ QRegularExpressionMatch QRegularExpressionMatchPrivate::nextMatch() const
                                                                                capturedOffsets.at(1),
                                                                                matchType,
                                                                                matchOptions,
-                                                                               false,
+                                                                               QRegularExpressionPrivate::DontCheckSubjectString,
                                                                                this);
     return QRegularExpressionMatch(*nextPrivate);
 }
@@ -1669,6 +1714,27 @@ QRegularExpressionMatchIterator QRegularExpression::globalMatch(const QString &s
 }
 
 /*!
+    \since 5.4
+
+    Forces an immediate optimization of the pattern, including
+    JIT-compiling it (if the JIT compiler is enabled).
+
+    Patterns are normally optimized only after a certain number of usages.
+    If you can predict that this QRegularExpression object is going to be
+    used for several matches, it may be convenient to optimize it in
+    advance by calling this function.
+
+    \sa QRegularExpression::OptimizeOnFirstUsageOption
+*/
+void QRegularExpression::optimize() const
+{
+    if (!isValid()) // will compile the pattern
+        return;
+
+    d->optimizePattern(QRegularExpressionPrivate::ImmediateOptimizeOption);
+}
+
+/*!
     Returns \c true if the regular expression is equal to \a re, or false
     otherwise. Two QRegularExpression objects are equal if they have
     the same pattern string and the same pattern options.
@@ -2329,6 +2395,10 @@ QDebug operator<<(QDebug debug, QRegularExpression::PatternOptions patternOption
             flags.append("DontCaptureOption|");
         if (patternOptions & QRegularExpression::UseUnicodePropertiesOption)
             flags.append("UseUnicodePropertiesOption|");
+        if (patternOptions & QRegularExpression::OptimizeOnFirstUsageOption)
+            flags.append("OptimizeOnFirstUsageOption|");
+        if (patternOptions & QRegularExpression::DontAutomaticallyOptimizeOption)
+            flags.append("DontAutomaticallyOptimizeOption|");
         flags.chop(1);
     }
 
@@ -2492,7 +2562,16 @@ static const char *pcreCompileErrorCodes[] =
     QT_TRANSLATE_NOOP("QRegularExpression", "disallowed Unicode code point (>= 0xd800 && <= 0xdfff)"),
     QT_TRANSLATE_NOOP("QRegularExpression", "invalid UTF-16 string"),
     QT_TRANSLATE_NOOP("QRegularExpression", "name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN)"),
-    QT_TRANSLATE_NOOP("QRegularExpression", "character value in \\u.... sequence is too large")
+    QT_TRANSLATE_NOOP("QRegularExpression", "character value in \\u.... sequence is too large"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "invalid UTF-32 string"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "setting UTF is disabled by the application"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "non-hex character in \\x{} (closing brace missing?)"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "non-octal character in \\o{} (closing brace missing?)"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "missing opening brace after \\o"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "parentheses are too deeply nested"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "invalid range in character class"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "group name must start with a non-digit"),
+    QT_TRANSLATE_NOOP("QRegularExpression", "parentheses are too deeply nested (stack check)")
 };
 #endif // #if 0
 
diff --git a/src/corelib/tools/qregularexpression.h b/src/corelib/tools/qregularexpression.h
index 5059ea6431..66538f22b3 100644
--- a/src/corelib/tools/qregularexpression.h
+++ b/src/corelib/tools/qregularexpression.h
@@ -6,36 +6,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,7 +61,9 @@ public:
         ExtendedPatternSyntaxOption    = 0x0008,
         InvertedGreedinessOption       = 0x0010,
         DontCaptureOption              = 0x0020,
-        UseUnicodePropertiesOption     = 0x0040
+        UseUnicodePropertiesOption     = 0x0040,
+        OptimizeOnFirstUsageOption     = 0x0080,
+        DontAutomaticallyOptimizeOption = 0x0100
     };
     Q_DECLARE_FLAGS(PatternOptions, PatternOption)
 
@@ -108,7 +102,8 @@ public:
 
     enum MatchOption {
         NoMatchOption              = 0x0000,
-        AnchoredMatchOption        = 0x0001
+        AnchoredMatchOption        = 0x0001,
+        DontCheckSubjectStringMatchOption = 0x0002
     };
     Q_DECLARE_FLAGS(MatchOptions, MatchOption)
 
@@ -122,6 +117,8 @@ public:
                                                 MatchType matchType       = NormalMatch,
                                                 MatchOptions matchOptions = NoMatchOption) const;
 
+    void optimize() const;
+
     static QString escape(const QString &str);
 
     bool operator==(const QRegularExpression &re) const;
diff --git a/src/corelib/tools/qringbuffer_p.h b/src/corelib/tools/qringbuffer_p.h
index 5d25b0add1..2279f1bc2a 100644
--- a/src/corelib/tools/qringbuffer_p.h
+++ b/src/corelib/tools/qringbuffer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,9 +53,9 @@ QT_BEGIN_NAMESPACE
 class QRingBuffer
 {
 public:
-    explicit inline QRingBuffer(int growth = 4096) : basicBlockSize(growth) {
-        buffers << QByteArray();
-        clear();
+    explicit inline QRingBuffer(int growth = 4096) :
+        head(0), tail(0), tailBuffer(0), basicBlockSize(growth), bufferSize(0) {
+        buffers.append(QByteArray());
     }
 
     inline int nextDataBlockSize() const {
@@ -78,115 +70,65 @@ public:
     // the out-variable length will contain the amount of bytes readable
     // from there, e.g. the amount still the same QByteArray
     inline const char *readPointerAtPosition(qint64 pos, qint64 &length) const {
-        if (buffers.isEmpty()) {
-            length = 0;
-            return 0;
-        }
-
-        if (pos >= bufferSize) {
-            length = 0;
-            return 0;
-        }
-
-        // special case: it is in the first buffer
-        int nextDataBlockSizeValue = nextDataBlockSize();
-        if (pos < nextDataBlockSizeValue) {
-            length = nextDataBlockSizeValue - pos;
-            return buffers.at(0).constData() + head + pos;
-        }
-
-        // special case: we only had one buffer and tried to read over it
-        if (buffers.length() == 1) {
-            length = 0;
-            return 0;
-        }
-
-        // skip the first
-        pos -= nextDataBlockSizeValue;
-
-        // normal case: it is somewhere in the second to the-one-before-the-tailBuffer
-        for (int i = 1; i < tailBuffer; i++) {
-            if (pos >= buffers[i].size()) {
-                pos -= buffers[i].size();
-                continue;
+        if (pos >= 0) {
+            pos += head;
+            for (int i = 0; i < buffers.size(); ++i) {
+                length = (i == tailBuffer ? tail : buffers[i].size());
+                if (length > pos) {
+                    length -= pos;
+                    return buffers[i].constData() + pos;
+                }
+                pos -= length;
             }
-
-            length = buffers[i].length() - pos;
-            return buffers[i].constData() + pos;
         }
 
-        // it is in the tail buffer
-        length = tail - pos;
-        return buffers[tailBuffer].constData() + pos;
+        length = 0;
+        return 0;
     }
 
     inline void free(int bytes) {
-        bufferSize -= bytes;
-        if (bufferSize < 0)
-            bufferSize = 0;
-
-        for (;;) {
-            int nextBlockSize = nextDataBlockSize();
-            if (bytes < nextBlockSize) {
-                head += bytes;
-                if (head == tail && tailBuffer == 0)
-                    head = tail = 0;
-                break;
-            }
-
-            bytes -= nextBlockSize;
-            if (buffers.count() == 1) {
-                if (buffers.at(0).size() != basicBlockSize)
-                    buffers[0].resize(basicBlockSize);
-                head = tail = 0;
-                tailBuffer = 0;
-                break;
+        while (bytes > 0) {
+            int blockSize = buffers.first().size() - head;
+
+            if (tailBuffer == 0 || blockSize > bytes) {
+                bufferSize -= bytes;
+                if (bufferSize <= 0)
+                    clear(); // try to minify/squeeze us
+                else
+                    head += bytes;
+                return;
             }
 
-            buffers.removeAt(0);
+            bufferSize -= blockSize;
+            bytes -= blockSize;
+            buffers.removeFirst();
             --tailBuffer;
             head = 0;
         }
-
-        if (isEmpty())
-            clear(); // try to minify/squeeze us
     }
 
     inline char *reserve(int bytes) {
-        // if this is a fresh empty QRingBuffer
-        if (bufferSize == 0) {
-            buffers[0].resize(qMax(basicBlockSize, bytes));
-            bufferSize += bytes;
-            tail = bytes;
-            return buffers[tailBuffer].data();
-        }
-
-        bufferSize += bytes;
+        if (bytes <= 0)
+            return 0;
 
-        // if there is already enough space, simply return.
-        if (tail + bytes <= buffers.at(tailBuffer).size()) {
-            char *writePtr = buffers[tailBuffer].data() + tail;
-            tail += bytes;
-            return writePtr;
-        }
+        // if need buffer reallocation
+        if (tail + bytes > buffers.last().size()) {
+            if (tail >= basicBlockSize) {
+                // shrink this buffer to its current size
+                buffers.last().resize(tail);
 
-        // if our buffer isn't half full yet, simply resize it.
-        if (tail < buffers.at(tailBuffer).size() / 2) {
-            buffers[tailBuffer].resize(tail + bytes);
-            char *writePtr = buffers[tailBuffer].data() + tail;
-            tail += bytes;
-            return writePtr;
+                // create a new QByteArray
+                buffers.append(QByteArray());
+                ++tailBuffer;
+                tail = 0;
+            }
+            buffers.last().resize(qMax(basicBlockSize, tail + bytes));
         }
 
-        // shrink this buffer to its current size
-        buffers[tailBuffer].resize(tail);
-
-        // create a new QByteArray with the right size
-        buffers << QByteArray();
-        ++tailBuffer;
-        buffers[tailBuffer].resize(qMax(basicBlockSize, bytes));
-        tail = bytes;
-        return buffers[tailBuffer].data();
+        char *writePtr = buffers.last().data() + tail;
+        bufferSize += bytes;
+        tail += bytes;
+        return writePtr;
     }
 
     inline void truncate(int pos) {
@@ -195,33 +137,22 @@ public:
     }
 
     inline void chop(int bytes) {
-        bufferSize -= bytes;
-        if (bufferSize < 0)
-            bufferSize = 0;
-
-        for (;;) {
-            // special case: head and tail are in the same buffer
-            if (tailBuffer == 0) {
-                tail -= bytes;
-                if (tail <= head)
-                    tail = head = 0;
-                return;
-            }
-
-            if (bytes <= tail) {
-                tail -= bytes;
+        while (bytes > 0) {
+            if (tailBuffer == 0 || tail > bytes) {
+                bufferSize -= bytes;
+                if (bufferSize <= 0)
+                    clear(); // try to minify/squeeze us
+                else
+                    tail -= bytes;
                 return;
             }
 
+            bufferSize -= tail;
             bytes -= tail;
-            buffers.removeAt(tailBuffer);
-
+            buffers.removeLast();
             --tailBuffer;
-            tail = buffers.at(tailBuffer).size();
+            tail = buffers.last().size();
         }
-
-        if (isEmpty())
-            clear(); // try to minify/squeeze us
     }
 
     inline bool isEmpty() const {
@@ -245,11 +176,11 @@ public:
         --head;
         if (head < 0) {
             buffers.prepend(QByteArray());
-            buffers[0].resize(basicBlockSize);
+            buffers.first().resize(basicBlockSize);
             head = basicBlockSize - 1;
             ++tailBuffer;
         }
-        buffers[0][head] = c;
+        buffers.first()[head] = c;
         ++bufferSize;
     }
 
@@ -259,8 +190,7 @@ public:
 
     inline void clear() {
         buffers.erase(buffers.begin() + 1, buffers.end());
-        buffers[0].resize(0);
-        buffers[0].squeeze();
+        buffers.first().clear();
 
         head = tail = 0;
         tailBuffer = 0;
@@ -269,47 +199,34 @@ public:
 
     inline int indexOf(char c) const {
         int index = 0;
+        int j = head;
         for (int i = 0; i < buffers.size(); ++i) {
-            int start = 0;
-            int end = buffers.at(i).size();
-
-            if (i == 0)
-                start = head;
-            if (i == tailBuffer)
-                end = tail;
-            const char *ptr = buffers.at(i).data() + start;
-            for (int j = start; j < end; ++j) {
+            const char *ptr = buffers[i].constData() + j;
+            j = index + (i == tailBuffer ? tail : buffers[i].size()) - j;
+
+            while (index < j) {
                 if (*ptr++ == c)
                     return index;
                 ++index;
             }
+            j = 0;
         }
         return -1;
     }
 
     inline int indexOf(char c, int maxLength) const {
         int index = 0;
-        int remain = qMin(size(), maxLength);
-        for (int i = 0; remain && i < buffers.size(); ++i) {
-            int start = 0;
-            int end = buffers.at(i).size();
-
-            if (i == 0)
-                start = head;
-            if (i == tailBuffer)
-                end = tail;
-            if (remain < end - start) {
-                end = start + remain;
-                remain = 0;
-            } else {
-                remain -= end - start;
-            }
-            const char *ptr = buffers.at(i).data() + start;
-            for (int j = start; j < end; ++j) {
+        int j = head;
+        for (int i = 0; index < maxLength && i < buffers.size(); ++i) {
+            const char *ptr = buffers[i].constData() + j;
+            j = qMin(index + (i == tailBuffer ? tail : buffers[i].size()) - j, maxLength);
+
+            while (index < j) {
                 if (*ptr++ == c)
                     return index;
                 ++index;
             }
+            j = 0;
         }
         return -1;
     }
@@ -318,95 +235,47 @@ public:
         int bytesToRead = qMin(size(), maxLength);
         int readSoFar = 0;
         while (readSoFar < bytesToRead) {
-            const char *ptr = readPointer();
             int bytesToReadFromThisBlock = qMin(bytesToRead - readSoFar, nextDataBlockSize());
             if (data)
-                memcpy(data + readSoFar, ptr, bytesToReadFromThisBlock);
+                memcpy(data + readSoFar, readPointer(), bytesToReadFromThisBlock);
             readSoFar += bytesToReadFromThisBlock;
             free(bytesToReadFromThisBlock);
         }
         return readSoFar;
     }
 
-    inline QByteArray read(int maxLength) {
-        QByteArray tmp;
-        tmp.resize(qMin(maxLength, size()));
-        read(tmp.data(), tmp.size());
-        return tmp;
-    }
-
-    inline QByteArray readAll() {
-        return read(size());
-    }
-
     // read an unspecified amount (will read the first buffer)
     inline QByteArray read() {
         if (bufferSize == 0)
             return QByteArray();
 
-        // multiple buffers, just take the first one
-        if (head == 0 && tailBuffer != 0) {
-            QByteArray qba = buffers.takeFirst();
-            --tailBuffer;
-            bufferSize -= qba.length();
-            return qba;
-        }
-
-        // one buffer with good value for head. Just take it.
-        if (head == 0 && tailBuffer == 0) {
-            QByteArray qba = buffers.takeFirst();
-            qba.resize(tail);
-            buffers << QByteArray();
-            bufferSize = 0;
-            tail = 0;
-            return qba;
-        }
+        QByteArray qba(buffers.takeFirst());
 
-        // Bad case: We have to memcpy.
-        // We can avoid by initializing the QRingBuffer with basicBlockSize of 0
-        // and only using this read() function.
-        QByteArray qba(readPointer(), nextDataBlockSize());
-        buffers.removeFirst();
-        head = 0;
+        qba.reserve(0); // avoid that resizing needlessly reallocates
         if (tailBuffer == 0) {
-            buffers << QByteArray();
+            qba.resize(tail);
             tail = 0;
+            buffers.append(QByteArray());
         } else {
             --tailBuffer;
         }
-        bufferSize -= qba.length();
+        qba.remove(0, head); // does nothing if head is 0
+        head = 0;
+        bufferSize -= qba.size();
         return qba;
     }
 
     // append a new buffer to the end
     inline void append(const QByteArray &qba) {
-        buffers[tailBuffer].resize(tail);
-        buffers << qba;
-        ++tailBuffer;
-        tail = qba.length();
-        bufferSize += qba.length();
-    }
-
-    inline QByteArray peek(int maxLength) const {
-        int bytesToRead = qMin(size(), maxLength);
-        if(maxLength <= 0)
-            return QByteArray();
-        QByteArray ret;
-        ret.resize(bytesToRead);
-        int readSoFar = 0;
-        for (int i = 0; readSoFar < bytesToRead && i < buffers.size(); ++i) {
-            int start = 0;
-            int end = buffers.at(i).size();
-            if (i == 0)
-                start = head;
-            if (i == tailBuffer)
-                end = tail;
-            const int len = qMin(ret.size()-readSoFar, end-start);
-            memcpy(ret.data()+readSoFar, buffers.at(i).constData()+start, len);
-            readSoFar += len;
+        if (tail == 0) {
+            buffers.last() = qba;
+        } else {
+            buffers.last().resize(tail);
+            buffers.append(qba);
+            ++tailBuffer;
         }
-        Q_ASSERT(readSoFar == ret.size());
-        return ret;
+        tail = qba.size();
+        bufferSize += tail;
     }
 
     inline int skip(int length) {
@@ -414,35 +283,26 @@ public:
     }
 
     inline int readLine(char *data, int maxLength) {
-        int index = indexOf('\n');
-        if (index == -1)
-            return read(data, maxLength);
-        if (maxLength <= 0)
+        if (!data || --maxLength <= 0)
             return -1;
 
-        int readSoFar = 0;
-        while (readSoFar < index + 1 && readSoFar < maxLength - 1) {
-            int bytesToRead = qMin((index + 1) - readSoFar, nextDataBlockSize());
-            bytesToRead = qMin(bytesToRead, (maxLength - 1) - readSoFar);
-            memcpy(data + readSoFar, readPointer(), bytesToRead);
-            readSoFar += bytesToRead;
-            free(bytesToRead);
-        }
+        int i = indexOf('\n', maxLength);
+        i = read(data, i >= 0 ? (i + 1) : maxLength);
 
         // Terminate it.
-        data[readSoFar] = '\0';
-        return readSoFar;
+        data[i] = '\0';
+        return i;
     }
 
     inline bool canReadLine() const {
-        return indexOf('\n') != -1;
+        return indexOf('\n') >= 0;
     }
 
 private:
     QList<QByteArray> buffers;
     int head, tail;
     int tailBuffer; // always buffers.size() - 1
-    int basicBlockSize;
+    const int basicBlockSize;
     int bufferSize;
 };
 
diff --git a/src/corelib/tools/qscopedpointer.cpp b/src/corelib/tools/qscopedpointer.cpp
index f567eded49..57829bdd08 100644
--- a/src/corelib/tools/qscopedpointer.cpp
+++ b/src/corelib/tools/qscopedpointer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,7 +73,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet code/src_corelib_tools_qscopedpointer.cpp 2
 
-    \section1 Custom cleanup handlers
+    \section1 Custom Cleanup Handlers
 
     Arrays as well as pointers that have been allocated with \c malloc must
     not be deleted using \c delete. QScopedPointer's second template parameter
diff --git a/src/corelib/tools/qscopedpointer.h b/src/corelib/tools/qscopedpointer.h
index dd6e5bd57b..8880cde430 100644
--- a/src/corelib/tools/qscopedpointer.h
+++ b/src/corelib/tools/qscopedpointer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qscopedpointer_p.h b/src/corelib/tools/qscopedpointer_p.h
index 06ebac1853..2c29635ce1 100644
--- a/src/corelib/tools/qscopedpointer_p.h
+++ b/src/corelib/tools/qscopedpointer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qscopedvaluerollback.cpp b/src/corelib/tools/qscopedvaluerollback.cpp
index 2d61d2114e..91a4b8f844 100644
--- a/src/corelib/tools/qscopedvaluerollback.cpp
+++ b/src/corelib/tools/qscopedvaluerollback.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,15 @@ QT_BEGIN_NAMESPACE
 */
 
 /*!
+    \fn QScopedValueRollback::QScopedValueRollback(T &var, T value)
+
+    Assigns \a value to \ var and stores the previous value of \a var
+    internally, for revert on destruction.
+
+    \since 5.4
+*/
+
+/*!
     \fn QScopedValueRollback::~QScopedValueRollback()
 
     Assigns the previous value to the managed variable.
diff --git a/src/corelib/tools/qscopedvaluerollback.h b/src/corelib/tools/qscopedvaluerollback.h
index dfaf1984be..3775e1359c 100644
--- a/src/corelib/tools/qscopedvaluerollback.h
+++ b/src/corelib/tools/qscopedvaluerollback.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,6 +48,13 @@ public:
         oldValue = varRef;
     }
 
+    explicit QScopedValueRollback(T &var, T value) :
+        varRef(var)
+    {
+        oldValue = varRef;
+        varRef = value;
+    }
+
     ~QScopedValueRollback()
     {
         varRef = oldValue;
diff --git a/src/corelib/tools/qset.h b/src/corelib/tools/qset.h
index 0cc704b6cf..662afbf84a 100644
--- a/src/corelib/tools/qset.h
+++ b/src/corelib/tools/qset.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,7 +52,7 @@ public:
 #ifdef Q_COMPILER_INITIALIZER_LISTS
     inline QSet(std::initializer_list<T> list)
     {
-        reserve(list.size());
+        reserve(int(list.size()));
         for (typename std::initializer_list<T>::const_iterator it = list.begin(); it != list.end(); ++it)
             insert(*it);
     }
@@ -356,12 +348,9 @@ class QMutableSetIterator
 public:
     inline QMutableSetIterator(QSet<T> &container)
         : c(&container)
-    { c->setSharable(false); i = c->begin(); n = c->end(); }
-    inline ~QMutableSetIterator()
-    { c->setSharable(true); }
+    { i = c->begin(); n = c->end(); }
     inline QMutableSetIterator &operator=(QSet<T> &container)
-    { c->setSharable(true); c = &container; c->setSharable(false);
-      i = c->begin(); n = c->end(); return *this; }
+    { c = &container; i = c->begin(); n = c->end(); return *this; }
     inline void toFront() { i = c->begin(); n = c->end(); }
     inline void toBack() { i = c->end(); n = i; }
     inline bool hasNext() const { return c->constEnd() != i; }
diff --git a/src/corelib/tools/qshareddata.cpp b/src/corelib/tools/qshareddata.cpp
index 941e58ee7c..37de091776 100644
--- a/src/corelib/tools/qshareddata.cpp
+++ b/src/corelib/tools/qshareddata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -230,7 +222,7 @@ QT_BEGIN_NAMESPACE
     In the member function documentation, \e{d pointer} always refers
     to the internal pointer to the shared data object.
 
-    \section1 Optimize performance for usage in Qt Containers
+    \section1 Optimize Performance for Usage in Qt Containers
 
     You should consider marking your implicitly shared class as a movable type
     using the Q_DECLARE_TYPEINFO() macro if it resembles the \c Employee class
@@ -538,10 +530,34 @@ QT_BEGIN_NAMESPACE
 /*! \fn QExplicitlySharedDataPointer::QExplicitlySharedDataPointer(const QExplicitlySharedDataPointer<X>& other)
     This copy constructor is different in that it allows \a other to be
     a different type of explicitly shared data pointer but one that has
-    a compatible shared data object. It performs a static cast of the
-    \e{d pointer} in \a other and sets the \e {d pointer} of \e this to
-    the converted \e{d pointer}. It increments the reference count of
-    the shared data object.
+    a compatible shared data object.
+
+    By default, the \e{d pointer} of \a other (of type \c{X *}) gets
+    implicitly converted to the type \c{T *}; the result of this
+    conversion is set as the \e{d pointer} of \e{this}, and the
+    reference count of the shared data object is incremented.
+
+    However, if the macro
+    \c{QT_ENABLE_QEXPLICITLYSHAREDDATAPOINTER_STATICCAST} is defined
+    before including the \c{QExplicitlySharedDataPointer} header, then
+    the \e{d pointer} of \a other undergoes a \c{static_cast} to the
+    type \c{T *}. The result of the cast is then set as the
+    \e{d pointer} of \e{this}, and the reference count of the shared data
+    object is incremented.
+
+    \warning relying on such \c{static_cast} is potentially dangerous,
+    because it allows code like this to compile:
+
+    \code
+        QExplicitlySharedDataPointer<Base> base(new Base);
+        QExplicitlySharedDataPointer<Derived> derived(base); // !!! DANGER !!!
+    \endcode
+
+    Starting from Qt 5.4 the cast is disabled by default. It is
+    possible to enable it back by defining the
+    \c{QT_ENABLE_QEXPLICITLYSHAREDDATAPOINTER_STATICCAST} macro, and
+    therefore to allow old code (that relied on this feature) to
+    compile without modifications.
 */
 
 /*! \fn QExplicitlySharedDataPointer<T>& QExplicitlySharedDataPointer::operator=(const QExplicitlySharedDataPointer<T>& other)
diff --git a/src/corelib/tools/qshareddata.h b/src/corelib/tools/qshareddata.h
index 00bf4cba2a..53f51b7f2e 100644
--- a/src/corelib/tools/qshareddata.h
+++ b/src/corelib/tools/qshareddata.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 
 #include <QtCore/qglobal.h>
 #include <QtCore/qatomic.h>
+#include <QtCore/qhash.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -166,7 +159,12 @@ public:
     inline QExplicitlySharedDataPointer(const QExplicitlySharedDataPointer<T> &o) : d(o.d) { if (d) d->ref.ref(); }
 
     template<class X>
-    inline QExplicitlySharedDataPointer(const QExplicitlySharedDataPointer<X> &o) : d(static_cast<T *>(o.data()))
+    inline QExplicitlySharedDataPointer(const QExplicitlySharedDataPointer<X> &o)
+#ifdef QT_ENABLE_QEXPLICITLYSHAREDDATAPOINTER_STATICCAST
+        : d(static_cast<T *>(o.data()))
+#else
+        : d(o.data())
+#endif
     {
         if(d)
             d->ref.ref();
@@ -274,6 +272,17 @@ namespace std {
 }
 QT_BEGIN_NAMESPACE
 
+template <class T>
+Q_INLINE_TEMPLATE uint qHash(const QSharedDataPointer<T> &ptr, uint seed = 0)
+{
+    return qHash(ptr.data(), seed);
+}
+template <class T>
+Q_INLINE_TEMPLATE uint qHash(const QExplicitlySharedDataPointer<T> &ptr, uint seed = 0)
+{
+    return qHash(ptr.data(), seed);
+}
+
 template<typename T> Q_DECLARE_TYPEINFO_BODY(QSharedDataPointer<T>, Q_MOVABLE_TYPE);
 template<typename T> Q_DECLARE_TYPEINFO_BODY(QExplicitlySharedDataPointer<T>, Q_MOVABLE_TYPE);
 
diff --git a/src/corelib/tools/qsharedpointer.cpp b/src/corelib/tools/qsharedpointer.cpp
index a610fc46e5..666bc107fa 100644
--- a/src/corelib/tools/qsharedpointer.cpp
+++ b/src/corelib/tools/qsharedpointer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -111,7 +103,7 @@
     does so weakly. QWeakPointer has the same functionality, but its use for
     that function is deprecated.
 
-    \section1 Optional pointer tracking
+    \section1 Optional Pointer Tracking
 
     A feature of QSharedPointer that can be enabled at compile-time for
     debugging purposes is a pointer tracking mechanism. When enabled,
@@ -372,6 +364,64 @@
 */
 
 /*!
+    \class QEnableSharedFromThis
+    \inmodule QtCore
+    \brief A base class that allows obtaining a QSharedPointer for an object already managed by a shared pointer
+    \since 5.4
+
+    You can inherit this class when you need to create a QSharedPointer
+    from any instance of a class; for instance, from within the
+    object itself. The key point is that the technique of
+    just returning QSharedPointer<T>(this) can not be used, because
+    this winds up creating multiple distinct QSharedPointer objects
+    with separate reference counts. For this reason you must never
+    create more than one QSharedPointer from the same raw pointer.
+
+    QEnableSharedFromThis defines two member functions called
+    sharedFromThis() that return a QSharedPointer<T> and
+    QSharedPointer<const T>, depending on constness, to \c this:
+
+    \code
+    class Y: public QEnableSharedFromThis<Y>
+    {
+    public:
+        QSharedPointer<Y> f()
+        {
+            return sharedFromThis();
+        }
+    };
+
+    int main()
+    {
+        QSharedPointer<Y> p(new Y());
+        QSharedPointer<Y> y = p->f();
+        Q_ASSERT(p == y); // p and q must share ownership
+    }
+    \endcode
+
+    It is also possible to get a shared pointer from an object outside of
+    the class itself. This is especially useful in code that provides an
+    interface to scripts, where it is currently not possible to use shared
+    pointers. For example:
+
+    \code
+    class ScriptInterface : public QObject
+    {
+        Q_OBJECT
+
+        // ...
+
+    public slots:
+        void slotCalledByScript(Y *managedBySharedPointer)
+        {
+            QSharedPointer<Y> yPtr = managedBySharedPointer->sharedFromThis();
+            // Some other code unrelated to scripts that expects a QSharedPointer<Y> ...
+        }
+    };
+    \endcode
+*/
+
+/*!
     \fn QSharedPointer::QSharedPointer()
 
     Creates a QSharedPointer that points to null (0).
@@ -402,7 +452,7 @@
     The \a deleter parameter specifies the custom deleter for this
     object. The custom deleter is called, instead of the operator delete(),
     when the strong reference count drops to 0. This is useful,
-    for instance, for calling deleteLater() on a QObject instead:
+    for instance, for calling \l {QObject::}{deleteLater()} on a QObject instead:
 
     \code
     static void doDeleteLater(MyObject *obj)
@@ -630,9 +680,15 @@
     This function will attempt to call a constructor for type \tt T that can
     accept all the arguments passed. Arguments will be perfectly-forwarded.
 
-    \note This function is only available with a C++11 compiler that supports
-    perfect forwarding of an arbitrary number of arguments. If the compiler
-    does not support the necessary C++11 features, you must use the overload
+    \note This function is only fully available with a C++11 compiler that
+    supports perfect forwarding of an arbitrary number of arguments.
+
+    If the compiler does not support the necessary C++11 features,
+    then a restricted version is available since Qt 5.4: you may pass
+    one (but just one) argument, and it will always be passed by const
+    reference.
+
+    If you target Qt before version 5.4, you must use the overload
     that calls the default constructor.
 */
 
@@ -771,6 +827,14 @@
 */
 
 /*!
+    \fn void QWeakPointer::swap(QWeakPointer<T> &other)
+    \since 5.4
+
+    Swaps this weak pointer instance with \a other. This function is
+    very fast and never fails.
+*/
+
+/*!
     \fn bool QWeakPointer::isNull() const
 
     Returns \c true if this object is holding a reference to a null
@@ -894,6 +958,15 @@
 */
 
 /*!
+    \fn QSharedPointer<T> QWeakPointer::lock() const
+    \since 5.4
+
+    Same as toStrongRef().
+
+    This function is provided for API compatibility with std::weak_ptr.
+*/
+
+/*!
     \fn void QWeakPointer::clear()
 
     Clears this QWeakPointer object, dropping the reference that it
@@ -901,6 +974,23 @@
 */
 
 /*!
+    \fn QSharedPointer<T> QEnableSharedFromThis::sharedFromThis()
+    \since 5.4
+
+    If \c this (that is, the subclass instance invoking this method) is being
+    managed by a QSharedPointer, returns a shared pointer instance pointing to
+    \c this; otherwise returns a QSharedPointer holding a null pointer.
+*/
+
+/*!
+    \fn QSharedPointer<const T> QEnableSharedFromThis::sharedFromThis() const
+    \overload
+    \since 5.4
+
+    Const overload of sharedFromThis().
+*/
+
+/*!
     \fn bool operator==(const QSharedPointer<T> &ptr1, const QSharedPointer<X> &ptr2)
     \relates QSharedPointer
 
diff --git a/src/corelib/tools/qsharedpointer.h b/src/corelib/tools/qsharedpointer.h
index 34b4bfbb12..9dfd85238d 100644
--- a/src/corelib/tools/qsharedpointer.h
+++ b/src/corelib/tools/qsharedpointer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -122,10 +114,21 @@ public:
     QWeakPointer(const QObject *other);
     QWeakPointer<T> operator=(const QObject *other);
 
+    void swap(QWeakPointer<T> &other);
+
     T *data() const;
     void clear();
 
     QSharedPointer<T> toStrongRef() const;
+    QSharedPointer<T> lock() const;
+};
+
+template <class T>
+class QEnableSharedFromThis
+{
+public:
+    QSharedPointer<T> sharedFromThis();
+    QSharedPointer<const T> sharedFromThis() const;
 };
 
 template<class T, class X> bool operator==(const QSharedPointer<T> &ptr1, const QSharedPointer<X> &ptr2);
diff --git a/src/corelib/tools/qsharedpointer_impl.h b/src/corelib/tools/qsharedpointer_impl.h
index 1423449a69..061c7a5a2d 100644
--- a/src/corelib/tools/qsharedpointer_impl.h
+++ b/src/corelib/tools/qsharedpointer_impl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -91,6 +83,7 @@ template<typename T> inline void qt_sharedpointer_cast_check(T *) { }
 //
 template <class T> class QWeakPointer;
 template <class T> class QSharedPointer;
+template <class T> class QEnableSharedFromThis;
 
 class QVariant;
 
@@ -318,16 +311,22 @@ public:
     inline QSharedPointer(T *ptr, Deleter deleter) : value(ptr) // throws
     { internalConstruct(ptr, deleter); }
 
-    inline QSharedPointer(const QSharedPointer<T> &other) : value(other.value), d(other.d)
+    inline QSharedPointer(const QSharedPointer &other) : value(other.value), d(other.d)
     { if (d) ref(); }
-    inline QSharedPointer<T> &operator=(const QSharedPointer<T> &other)
+    inline QSharedPointer &operator=(const QSharedPointer &other)
     {
         QSharedPointer copy(other);
         swap(copy);
         return *this;
     }
 #ifdef Q_COMPILER_RVALUE_REFS
-    inline QSharedPointer<T> &operator=(QSharedPointer<T> &&other)
+    inline QSharedPointer(QSharedPointer &&other)
+        : value(other.value), d(other.d)
+    {
+        other.d = 0;
+        other.value = 0;
+    }
+    inline QSharedPointer &operator=(QSharedPointer &&other)
     {
         swap(other);
         return *this;
@@ -339,7 +338,7 @@ public:
     { if (d) ref(); }
 
     template <class X>
-    inline QSharedPointer<T> &operator=(const QSharedPointer<X> &other)
+    inline QSharedPointer &operator=(const QSharedPointer<X> &other)
     {
         QSHAREDPOINTER_VERIFY_AUTO_CAST(T, X); // if you get an error in this line, the cast is invalid
         internalCopy(other);
@@ -355,7 +354,7 @@ public:
     { internalSet(other.d, other.value); return *this; }
 
     inline void swap(QSharedPointer &other)
-    { QSharedPointer<T>::internalSwap(other); }
+    { this->internalSwap(other); }
 
     inline void reset() { clear(); }
     inline void reset(T *t)
@@ -396,7 +395,7 @@ public:
 
 #if defined(Q_COMPILER_RVALUE_REFS) && defined(Q_COMPILER_VARIADIC_TEMPLATES)
     template <typename... Args>
-    static QSharedPointer<T> create(Args && ...arguments)
+    static QSharedPointer create(Args && ...arguments)
     {
         typedef QtSharedPointer::ExternalRefCountWithContiguousData<T> Private;
 # ifdef QT_SHAREDPOINTER_TRACK_POINTERS
@@ -404,7 +403,7 @@ public:
 # else
         typename Private::DestroyerFn destroy = &Private::deleter;
 # endif
-        QSharedPointer<T> result(Qt::Uninitialized);
+        QSharedPointer result(Qt::Uninitialized);
         result.d = Private::create(&result.value, destroy);
 
         // now initialize the data
@@ -416,7 +415,7 @@ public:
         return result;
     }
 #else
-    static inline QSharedPointer<T> create()
+    static inline QSharedPointer create()
     {
         typedef QtSharedPointer::ExternalRefCountWithContiguousData<T> Private;
 # ifdef QT_SHAREDPOINTER_TRACK_POINTERS
@@ -424,7 +423,7 @@ public:
 # else
         typename Private::DestroyerFn destroy = &Private::deleter;
 # endif
-        QSharedPointer<T> result(Qt::Uninitialized);
+        QSharedPointer result(Qt::Uninitialized);
         result.d = Private::create(&result.value, destroy);
 
         // now initialize the data
@@ -435,6 +434,27 @@ public:
         result.d->setQObjectShared(result.value, true);
         return result;
     }
+
+    template <typename Arg>
+    static inline QSharedPointer create(const Arg &arg)
+    {
+        typedef QtSharedPointer::ExternalRefCountWithContiguousData<T> Private;
+# ifdef QT_SHAREDPOINTER_TRACK_POINTERS
+        typename Private::DestroyerFn destroy = &Private::safetyCheckDeleter;
+# else
+        typename Private::DestroyerFn destroy = &Private::deleter;
+# endif
+        QSharedPointer result(Qt::Uninitialized);
+        result.d = Private::create(&result.value, destroy);
+
+        // now initialize the data
+        new (result.data()) T(arg);
+# ifdef QT_SHAREDPOINTER_TRACK_POINTERS
+        internalSafetyCheckAdd(result.d, result.value);
+# endif
+        result.d->setQObjectShared(result.value, true);
+        return result;
+    }
 #endif
 
 private:
@@ -452,6 +472,14 @@ private:
             delete d;
     }
 
+    template <class X>
+    inline void enableSharedFromThis(const QEnableSharedFromThis<X> *ptr)
+    {
+        ptr->initializeFromSharedPointer(*this);
+    }
+
+    inline void enableSharedFromThis(...) {}
+
     template <typename Deleter>
     inline void internalConstruct(T *ptr, Deleter deleter)
     {
@@ -472,6 +500,7 @@ private:
         internalSafetyCheckAdd(d, ptr);
 #endif
         d->setQObjectShared(ptr, true);
+        enableSharedFromThis(ptr);
     }
 
     template <class X>
@@ -555,7 +584,7 @@ public:
     inline bool operator !() const { return isNull(); }
     inline T *data() const { return d == 0 || d->strongref.load() == 0 ? 0 : value; }
 
-    inline QWeakPointer() : d(0), value(0) { }
+    Q_DECL_CONSTEXPR inline QWeakPointer() : d(0), value(0) { }
     inline ~QWeakPointer() { if (d && !d->weakref.deref()) delete d; }
 
 #ifndef QT_NO_QOBJECT
@@ -573,17 +602,23 @@ public:
     { return *this = QWeakPointer(ptr); }
 #endif
 
-    inline QWeakPointer(const QWeakPointer<T> &o) : d(o.d), value(o.value)
+    inline QWeakPointer(const QWeakPointer &o) : d(o.d), value(o.value)
     { if (d) d->weakref.ref(); }
-    inline QWeakPointer<T> &operator=(const QWeakPointer<T> &o)
+    inline QWeakPointer &operator=(const QWeakPointer &o)
     {
         internalSet(o.d, o.value);
         return *this;
     }
 
+    inline void swap(QWeakPointer &other)
+    {
+        qSwap(this->d, other.d);
+        qSwap(this->value, other.value);
+    }
+
     inline QWeakPointer(const QSharedPointer<T> &o) : d(o.d), value(o.data())
     { if (d) d->weakref.ref();}
-    inline QWeakPointer<T> &operator=(const QSharedPointer<T> &o)
+    inline QWeakPointer &operator=(const QSharedPointer<T> &o)
     {
         internalSet(o.d, o.value);
         return *this;
@@ -594,7 +629,7 @@ public:
     { *this = o; }
 
     template <class X>
-    inline QWeakPointer<T> &operator=(const QWeakPointer<X> &o)
+    inline QWeakPointer &operator=(const QWeakPointer<X> &o)
     {
         // conversion between X and T could require access to the virtual table
         // so force the operation to go through QSharedPointer
@@ -615,7 +650,7 @@ public:
     { *this = o; }
 
     template <class X>
-    inline QWeakPointer<T> &operator=(const QSharedPointer<X> &o)
+    inline QWeakPointer &operator=(const QSharedPointer<X> &o)
     {
         QSHAREDPOINTER_VERIFY_AUTO_CAST(T, X); // if you get an error in this line, the cast is invalid
         internalSet(o.d, o.data());
@@ -630,9 +665,11 @@ public:
     inline bool operator!=(const QSharedPointer<X> &o) const
     { return !(*this == o); }
 
-    inline void clear() { *this = QWeakPointer<T>(); }
+    inline void clear() { *this = QWeakPointer(); }
 
     inline QSharedPointer<T> toStrongRef() const { return QSharedPointer<T>(*this); }
+    // std::weak_ptr compatibility:
+    inline QSharedPointer<T> lock() const { return toStrongRef(); }
 
 #if defined(QWEAKPOINTER_ENABLE_ARROW)
     inline T *operator->() const { return data(); }
@@ -672,6 +709,37 @@ public:
     T *value;
 };
 
+template <class T>
+class QEnableSharedFromThis
+{
+protected:
+#ifdef Q_COMPILER_DEFAULT_MEMBERS
+    QEnableSharedFromThis() = default;
+#else
+    Q_DECL_CONSTEXPR QEnableSharedFromThis() {}
+#endif
+    QEnableSharedFromThis(const QEnableSharedFromThis &) {}
+    QEnableSharedFromThis &operator=(const QEnableSharedFromThis &) { return *this; }
+
+public:
+    inline QSharedPointer<T> sharedFromThis() { return QSharedPointer<T>(weakPointer); }
+    inline QSharedPointer<const T> sharedFromThis() const { return QSharedPointer<const T>(weakPointer); }
+
+#ifndef Q_NO_TEMPLATE_FRIENDS
+private:
+    template <class X> friend class QSharedPointer;
+#else
+public:
+#endif
+    template <class X>
+    inline void initializeFromSharedPointer(const QSharedPointer<X> &ptr) const
+    {
+        weakPointer = ptr;
+    }
+
+    mutable QWeakPointer<T> weakPointer;
+};
+
 //
 // operator== and operator!=
 //
diff --git a/src/corelib/tools/qsimd.cpp b/src/corelib/tools/qsimd.cpp
index 2d679e036e..0b3bbc0ad0 100644
--- a/src/corelib/tools/qsimd.cpp
+++ b/src/corelib/tools/qsimd.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Intel Corporation.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,14 +46,13 @@
 #      include <intrin.h>
 #    endif
 #  endif
-#elif defined(Q_OS_LINUX) && (defined(Q_PROCESSOR_ARM) || defined(QT_COMPILER_SUPPORTS_IWMMXT))
+#elif defined(Q_OS_LINUX) && (defined(Q_PROCESSOR_ARM) || defined(Q_PROCESSOR_MIPS_32))
 #include "private/qcore_unix_p.h"
 
 // the kernel header definitions for HWCAP_*
 // (the ones we need/may need anyway)
 
 // copied from <asm/hwcap.h> (ARM)
-#define HWCAP_IWMMXT    512
 #define HWCAP_CRUNCH    1024
 #define HWCAP_THUMBEE   2048
 #define HWCAP_NEON      4096
@@ -86,23 +77,20 @@ static inline uint detectProcessorFeatures()
     uint features = 0;
 
 #if defined (ARM)
-    if (IsProcessorFeaturePresent(PF_ARM_INTEL_WMMX)) {
-        features = IWMMXT;
-        return features;
-    }
+#  ifdef PF_ARM_NEON
+    if (IsProcessorFeaturePresent(PF_ARM_NEON))
+        features |= ARM_NEON;
+#  endif
 #elif defined(_X86_)
-    features = 0;
     if (IsProcessorFeaturePresent(PF_XMMI64_INSTRUCTIONS_AVAILABLE))
         features |= SSE2;
     if (IsProcessorFeaturePresent(PF_SSE3_INSTRUCTIONS_AVAILABLE))
         features |= SSE3;
-    return features;
 #endif
-    features = 0;
     return features;
 }
 
-#elif defined(Q_PROCESSOR_ARM) || defined(QT_COMPILER_SUPPORTS_IWMMXT)
+#elif defined(Q_PROCESSOR_ARM)
 static inline uint detectProcessorFeatures()
 {
     uint features = 0;
@@ -122,8 +110,6 @@ static inline uint detectProcessorFeatures()
             int max = nread / (sizeof vector[0]);
             for (int i = 0; i < max; i += 2)
                 if (vector[i] == AT_HWCAP) {
-                    if (vector[i+1] & HWCAP_IWMMXT)
-                        features |= IWMMXT;
                     if (vector[i+1] & HWCAP_NEON)
                         features |= NEON;
                     break;
@@ -136,10 +122,7 @@ static inline uint detectProcessorFeatures()
     // fall back if /proc/self/auxv wasn't found
 #endif
 
-#if defined(QT_COMPILER_SUPPORTS_IWMMXT)
-    // runtime detection only available when running as a previlegied process
-    features = IWMMXT;
-#elif defined(__ARM_NEON__)
+#if defined(__ARM_NEON__)
     features = NEON;
 #endif
 
@@ -253,6 +236,22 @@ static void xgetbv(uint in, uint &eax, uint &edx)
 
 static inline uint detectProcessorFeatures()
 {
+    // Flags from the CR0 / XCR0 state register
+    enum XCR0Flags {
+        X87             = 1 << 0,
+        XMM0_15         = 1 << 1,
+        YMM0_15Hi128    = 1 << 2,
+        BNDRegs         = 1 << 3,
+        BNDCSR          = 1 << 4,
+        OpMask          = 1 << 5,
+        ZMM0_15Hi256    = 1 << 6,
+        ZMM16_31        = 1 << 7,
+
+        SSEState        = XMM0_15,
+        AVXState        = XMM0_15 | YMM0_15Hi128,
+        AVX512State     = AVXState | OpMask | ZMM0_15Hi256 | ZMM16_31
+    };
+
     uint features = 0;
     int cpuidLevel = maxBasicCpuidSupported();
     if (cpuidLevel < 1)
@@ -264,6 +263,7 @@ static inline uint detectProcessorFeatures()
     // x86 might not have SSE2 support
     if (cpuid01EDX & (1u << 26))
         features |= SSE2;
+    // we should verify that the OS enabled saving of the SSE state...
 #else
     // x86-64 or x32
     features = SSE2;
@@ -291,7 +291,7 @@ static inline uint detectProcessorFeatures()
     if (cpuidLevel >= 7)
         cpuidFeatures07_00(cpuid0700EBX);
 
-    if ((xgetbvA & 6) == 6) {
+    if ((xgetbvA & AVXState) == AVXState) {
         // support for YMM and XMM registers is enabled
         if (cpuid01ECX & (1u << 28))
             features |= AVX;
@@ -308,6 +308,141 @@ static inline uint detectProcessorFeatures()
     return features;
 }
 
+#elif defined(Q_PROCESSOR_MIPS_32)
+
+#if defined(Q_OS_LINUX)
+//
+// Do not use QByteArray: it could use SIMD instructions itself at
+// some point, thus creating a recursive dependency. Instead, use a
+// QSimpleBuffer, which has the bare minimum needed to use memory
+// dynamically and read lines from /proc/cpuinfo of arbitrary sizes.
+//
+struct QSimpleBuffer {
+    static const int chunk_size = 256;
+    char *data;
+    unsigned alloc;
+    unsigned size;
+
+    QSimpleBuffer(): data(0), alloc(0), size(0) {}
+    ~QSimpleBuffer() { ::free(data); }
+
+    void resize(unsigned newsize) {
+        if (newsize > alloc) {
+            unsigned newalloc = chunk_size * ((newsize / chunk_size) + 1);
+            if (newalloc < newsize) newalloc = newsize;
+            if (newalloc != alloc) {
+                data = static_cast<char*>(::realloc(data, newalloc));
+                alloc = newalloc;
+            }
+        }
+        size = newsize;
+    }
+    void append(const QSimpleBuffer &other, unsigned appendsize) {
+        unsigned oldsize = size;
+        resize(oldsize + appendsize);
+        ::memcpy(data + oldsize, other.data, appendsize);
+    }
+    void popleft(unsigned amount) {
+        if (amount >= size) return resize(0);
+        size -= amount;
+        ::memmove(data, data + amount, size);
+    }
+    char* cString() {
+        if (!alloc) resize(1);
+        return (data[size] = '\0', data);
+    }
+};
+
+//
+// Uses a scratch "buffer" (which must be used for all reads done in the
+// same file descriptor) to read chunks of data from a file, to read
+// one line at a time. Lines include the trailing newline character ('\n').
+// On EOF, line.size is zero.
+//
+static void bufReadLine(int fd, QSimpleBuffer &line, QSimpleBuffer &buffer)
+{
+    for (;;) {
+        char *newline = static_cast<char*>(::memchr(buffer.data, '\n', buffer.size));
+        if (newline) {
+            unsigned piece_size = newline - buffer.data + 1;
+            line.append(buffer, piece_size);
+            buffer.popleft(piece_size);
+            line.resize(line.size - 1);
+            return;
+        }
+        if (buffer.size + QSimpleBuffer::chunk_size > buffer.alloc) {
+            int oldsize = buffer.size;
+            buffer.resize(buffer.size + QSimpleBuffer::chunk_size);
+            buffer.size = oldsize;
+        }
+        ssize_t read_bytes = ::qt_safe_read(fd, buffer.data + buffer.size, QSimpleBuffer::chunk_size);
+        if (read_bytes > 0) buffer.size += read_bytes;
+        else return;
+    }
+}
+
+//
+// Checks if any line with a given prefix from /proc/cpuinfo contains
+// a certain string, surrounded by spaces.
+//
+static bool procCpuinfoContains(const char *prefix, const char *string)
+{
+    int cpuinfo_fd = ::qt_safe_open("/proc/cpuinfo", O_RDONLY);
+    if (cpuinfo_fd == -1)
+        return false;
+
+    unsigned string_len = ::strlen(string);
+    unsigned prefix_len = ::strlen(prefix);
+    QSimpleBuffer line, buffer;
+    bool present = false;
+    do {
+        line.resize(0);
+        bufReadLine(cpuinfo_fd, line, buffer);
+        char *colon = static_cast<char*>(::memchr(line.data, ':', line.size));
+        if (colon && line.size > prefix_len + string_len) {
+            if (!::strncmp(prefix, line.data, prefix_len)) {
+                // prefix matches, next character must be ':' or space
+                if (line.data[prefix_len] == ':' || ::isspace(line.data[prefix_len])) {
+                    // Does it contain the string?
+                    char *found = ::strstr(line.cString(), string);
+                    if (found && ::isspace(found[-1]) &&
+                            (::isspace(found[string_len]) || found[string_len] == '\0')) {
+                        present = true;
+                        break;
+                    }
+                }
+            }
+        }
+    } while (line.size);
+
+    ::qt_safe_close(cpuinfo_fd);
+    return present;
+}
+#endif
+
+static inline uint detectProcessorFeatures()
+{
+    // NOTE: MIPS 74K cores are the only ones supporting DSPr2.
+    uint flags = 0;
+
+#if defined __mips_dsp
+    flags |= DSP;
+#  if defined __mips_dsp_rev && __mips_dsp_rev >= 2
+    flags |= DSPR2;
+#  elif defined(Q_OS_LINUX)
+    if (procCpuinfoContains("cpu model", "MIPS 74Kc") || procCpuinfoContains("cpu model", "MIPS 74Kf"))
+        flags |= DSPR2;
+#  endif
+#elif defined(Q_OS_LINUX)
+    if (procCpuinfoContains("ASEs implemented", "dsp")) {
+        flags |= DSP;
+        if (procCpuinfoContains("cpu model", "MIPS 74Kc") || procCpuinfoContains("cpu model", "MIPS 74Kf"))
+            flags |= DSPR2;
+    }
+#endif
+
+    return flags;
+}
 
 #else
 static inline uint detectProcessorFeatures()
@@ -319,7 +454,7 @@ static inline uint detectProcessorFeatures()
 /*
  * Use kdesdk/scripts/generate_string_table.pl to update the table below.
  * Here's the data (don't forget the ONE leading space):
- iwmmxt
+
  neon
  sse2
  sse3
@@ -330,11 +465,13 @@ static inline uint detectProcessorFeatures()
  avx2
  hle
  rtm
+ dsp
+ dspr2
   */
 
 // begin generated
 static const char features_string[] =
-    " iwmmxt\0"
+    "\0"
     " neon\0"
     " sse2\0"
     " sse3\0"
@@ -345,11 +482,13 @@ static const char features_string[] =
     " avx2\0"
     " hle\0"
     " rtm\0"
+    " dsp\0"
+    " dspr2\0"
     "\0";
 
 static const int features_indices[] = {
-    0,    8,   14,   20,   26,   33,   41,   49,
-   54,   60,   65,   -1
+    0,    1,    7,   13,   19,   26,   34,   42,
+   47,   53,   58,   63,   68,   -1
 };
 // end generated
 
diff --git a/src/corelib/tools/qsimd_p.h b/src/corelib/tools/qsimd_p.h
index b8dd3b101e..ee2ff99a80 100644
--- a/src/corelib/tools/qsimd_p.h
+++ b/src/corelib/tools/qsimd_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,6 +53,7 @@
  * They mean the compiler supports the necessary flags and the headers
  * for the x86 and ARM intrinsics:
  *  - GCC: the -mXXX or march=YYY flag is necessary before #include
+ *    up to 4.8; GCC >= 4.9 can include unconditionally
  *  - Intel CC: #include can happen unconditionally
  *  - MSVC: #include can happen unconditionally
  *  - RVCT: ???
@@ -71,25 +64,98 @@
  * up do define __AVX__ if the -arch:AVX option is passed on the command-line.
  *
  * Supported XXX are:
- *   Flag  | Arch |  GCC  | Intel CC |  MSVC  |
- *  NEON   | ARM  | I & C | None     |   ?    |
- *  IWMMXT | ARM  | I & C | None     | I & C  |
- *  SSE2   | x86  | I & C | I & C    | I & C  |
- *  SSE3   | x86  | I & C | I & C    | I only |
- *  SSSE3  | x86  | I & C | I & C    | I only |
- *  SSE4_1 | x86  | I & C | I & C    | I only |
- *  SSE4_2 | x86  | I & C | I & C    | I only |
- *  AVX    | x86  | I & C | I & C    | I & C  |
- *  AVX2   | x86  | I & C | I & C    | I only |
+ *   Flag    | Arch |  GCC  | Intel CC |  MSVC  |
+ *  ARM_NEON | ARM  | I & C | None     |   ?    |
+ *  SSE2     | x86  | I & C | I & C    | I & C  |
+ *  SSE3     | x86  | I & C | I & C    | I only |
+ *  SSSE3    | x86  | I & C | I & C    | I only |
+ *  SSE4_1   | x86  | I & C | I & C    | I only |
+ *  SSE4_2   | x86  | I & C | I & C    | I only |
+ *  AVX      | x86  | I & C | I & C    | I & C  |
+ *  AVX2     | x86  | I & C | I & C    | I only |
  * I = intrinsics; C = code generation
+ *
+ * Code can use the following constructs to determine compiler support & status:
+ * - #ifdef __XXX__      (e.g: #ifdef __AVX__  or #ifdef __ARM_NEON__)
+ *   If this test passes, then the compiler is already generating code for that
+ *   given sub-architecture. The intrinsics for that sub-architecture are
+ *   #included and can be used without restriction or runtime check.
+ *
+ * - #if QT_COMPILER_SUPPORTS(XXX)
+ *   If this test passes, then the compiler is able to generate code for that
+ *   given sub-architecture in another translation unit, given the right set of
+ *   flags. Use of the intrinsics is not guaranteed. This is useful with
+ *   runtime detection (see below).
+ *
+ * - #if QT_COMPILER_SUPPORTS_HERE(XXX)
+ *   If this test passes, then the compiler is able to generate code for that
+ *   given sub-architecture in this translation unit, even if it is not doing
+ *   that now (it might be). Individual functions may be tagged with
+ *   QT_FUNCTION_TARGET(XXX) to cause the compiler to generate code for that
+ *   sub-arch. Only inside such functions is the use of the intrisics
+ *   guaranteed to work. This is useful with runtime detection (see below).
+ *
+ * Runtime detection of a CPU sub-architecture can be done with the
+ * qCpuHasFeature(XXX) function. There are two strategies for generating
+ * optimized code like that:
+ *
+ * 1) place the optimized code in a different translation unit (C or assembly
+ * sources) and pass the correct flags to the compiler to enable support. Those
+ * sources must not include qglobal.h, which means they cannot include this
+ * file either. The dispatcher function would look like this:
+ *
+ *      void foo()
+ *      {
+ *      #if QT_COMPILER_SUPPORTS(XXX)
+ *          if (qCpuHasFeature(XXX)) {
+ *              foo_optimized_xxx();
+ *              return;
+ *          }
+ *      #endif
+ *          foo_plain();
+ *      }
+ *
+ * 2) place the optimized code in a function tagged with QT_FUNCTION_TARGET and
+ * surrounded by #if QT_COMPILER_SUPPORTS_HERE(XXX). That code can freely use
+ * other Qt code. The dispatcher function would look like this:
+ *
+ *      void foo()
+ *      {
+ *      #if QT_COMPILER_SUPPORTS_HERE(XXX)
+ *          if (qCpuHasFeature(XXX)) {
+ *              foo_optimized_xxx();
+ *              return;
+ *          }
+ *      #endif
+ *          foo_plain();
+ *      }
  */
 
 #if defined(__MINGW64_VERSION_MAJOR) || (defined(Q_CC_MSVC) && !defined(Q_OS_WINCE))
 #include <intrin.h>
 #endif
 
+#define QT_COMPILER_SUPPORTS(x)     (QT_COMPILER_SUPPORTS_ ## x - 0)
+
+#if (defined(Q_CC_INTEL) || defined(Q_CC_MSVC) \
+    || (defined(Q_CC_GNU) && !defined(Q_CC_CLANG) && (__GNUC__-0) * 100 + (__GNUC_MINOR__-0) >= 409)) \
+    && !defined(QT_BOOTSTRAPPED)
+#  define QT_COMPILER_SUPPORTS_SIMD_ALWAYS
+#  define QT_COMPILER_SUPPORTS_HERE(x)    QT_COMPILER_SUPPORTS(x)
+#  if defined(Q_CC_GNU) && !defined(Q_CC_INTEL)
+     /* GCC requires attributes for a function */
+#    define QT_FUNCTION_TARGET(x)  __attribute__((__target__(QT_FUNCTION_TARGET_STRING_ ## x)))
+#  else
+#    define QT_FUNCTION_TARGET(x)
+#  endif
+#else
+#  define QT_COMPILER_SUPPORTS_HERE(x)    defined(__ ## x ## __)
+#  define QT_FUNCTION_TARGET(x)
+#endif
+
 // SSE intrinsics
-#if defined(__SSE2__) || (defined(QT_COMPILER_SUPPORTS_SSE2) && defined(Q_CC_MSVC))
+#define QT_FUNCTION_TARGET_STRING_SSE2      "sse2"
+#if defined(__SSE2__) || (defined(QT_COMPILER_SUPPORTS_SSE2) && defined(QT_COMPILER_SUPPORTS_SIMD_ALWAYS))
 #if defined(QT_LINUXBASE) || defined(Q_OS_ANDROID_NO_SDK)
 /// this is an evil hack - the posix_memalign declaration in LSB
 /// is wrong - see http://bugs.linuxbase.org/show_bug.cgi?id=2431
@@ -106,27 +172,33 @@
 #endif
 
 // SSE3 intrinsics
-#if defined(__SSE3__) || (defined(QT_COMPILER_SUPPORTS_SSE3) && defined(Q_CC_MSVC))
+#define QT_FUNCTION_TARGET_STRING_SSE3      "sse3"
+#if defined(__SSE3__) || (defined(QT_COMPILER_SUPPORTS_SSE3) && defined(QT_COMPILER_SUPPORTS_SIMD_ALWAYS))
 #include <pmmintrin.h>
 #endif
 
 // SSSE3 intrinsics
-#if defined(__SSSE3__) || (defined(QT_COMPILER_SUPPORTS_SSSE3) && defined(Q_CC_MSVC))
+#define QT_FUNCTION_TARGET_STRING_SSSE3     "ssse3"
+#if defined(__SSSE3__) || (defined(QT_COMPILER_SUPPORTS_SSSE3) && defined(QT_COMPILER_SUPPORTS_SIMD_ALWAYS))
 #include <tmmintrin.h>
 #endif
 
 // SSE4.1 intrinsics
-#if defined(__SSE4_1__) || (defined(QT_COMPILER_SUPPORTS_SSE4_1) && defined(Q_CC_MSVC))
+#define QT_FUNCTION_TARGET_STRING_SSE4_1    "sse4.1"
+#if defined(__SSE4_1__) || (defined(QT_COMPILER_SUPPORTS_SSE4_1) && defined(QT_COMPILER_SUPPORTS_SIMD_ALWAYS))
 #include <smmintrin.h>
 #endif
 
 // SSE4.2 intrinsics
-#if defined(__SSE4_2__) || (defined(QT_COMPILER_SUPPORTS_SSE4_2) && defined(Q_CC_MSVC))
+#define QT_FUNCTION_TARGET_STRING_SSE4_2    "sse4.2"
+#if defined(__SSE4_2__) || (defined(QT_COMPILER_SUPPORTS_SSE4_2) && defined(QT_COMPILER_SUPPORTS_SIMD_ALWAYS))
 #include <nmmintrin.h>
 #endif
 
 // AVX intrinsics
-#if defined(__AVX__) || (defined(QT_COMPILER_SUPPORTS_AVX) && defined(Q_CC_MSVC))
+#define QT_FUNCTION_TARGET_STRING_AVX       "avx"
+#define QT_FUNCTION_TARGET_STRING_AVX2      "avx2"
+#if defined(__AVX__) || (defined(QT_COMPILER_SUPPORTS_AVX) && defined(QT_COMPILER_SUPPORTS_SIMD_ALWAYS))
 // immintrin.h is the ultimate header, we don't need anything else after this
 #include <immintrin.h>
 
@@ -160,34 +232,19 @@
 #endif
 
 // NEON intrinsics
+// note: as of GCC 4.9, does not support function targets for ARM
 #if defined __ARM_NEON__
 #include <arm_neon.h>
+#define QT_FUNCTION_TARGET_STRING_ARM_NEON      "neon"
 #endif
 
-
-// IWMMXT intrinsics
-#if defined(QT_COMPILER_SUPPORTS_IWMMXT)
-#include <mmintrin.h>
-#if defined(Q_OS_WINCE)
-#  include "qplatformdefs.h"
-#endif
-#endif
-
-#if defined(QT_COMPILER_SUPPORTS_IWMMXT)
-#if !defined(__IWMMXT__) && !defined(Q_OS_WINCE)
-#  include <xmmintrin.h>
-#elif defined(Q_OS_WINCE_STD) && defined(_X86_)
-#  pragma warning(disable: 4391)
-#  include <xmmintrin.h>
-#endif
-#endif
+#undef QT_COMPILER_SUPPORTS_SIMD_ALWAYS
 
 QT_BEGIN_NAMESPACE
 
 
 enum CPUFeatures {
-    IWMMXT      = 0x1,
-    NEON        = 0x2,
+    NEON        = 0x2,  ARM_NEON = NEON,
     SSE2        = 0x4,
     SSE3        = 0x8,
     SSSE3       = 0x10,
@@ -197,6 +254,8 @@ enum CPUFeatures {
     AVX2        = 0x100,
     HLE         = 0x200,
     RTM         = 0x400,
+    DSP         = 0x800,
+    DSPR2       = 0x1000,
 
     // used only to indicate that the CPU detection was initialised
     QSimdInitialized = 0x80000000
@@ -233,12 +292,14 @@ static const uint qCompilerCpuFeatures = 0
 #if defined __ARM_NEON__
         | NEON
 #endif
-#if defined __IWMMXT__
-        | IWMMXT
+#if defined __mips_dsp
+        | DSP
+#endif
+#if defined __mips_dspr2
+        | DSPR2
 #endif
         ;
 
-
 extern Q_CORE_EXPORT QBasicAtomicInt qt_cpu_features;
 Q_CORE_EXPORT void qDetectCpuFeatures();
 
diff --git a/src/corelib/tools/qsize.cpp b/src/corelib/tools/qsize.cpp
index c9a6ffa03a..4c124162a1 100644
--- a/src/corelib/tools/qsize.cpp
+++ b/src/corelib/tools/qsize.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -445,9 +437,11 @@ QDataStream &operator>>(QDataStream &s, QSize &sz)
 #endif // QT_NO_DATASTREAM
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug dbg, const QSize &s) {
+QDebug operator<<(QDebug dbg, const QSize &s)
+{
+    QDebugStateSaver saver(dbg);
     dbg.nospace() << "QSize(" << s.width() << ", " << s.height() << ')';
-    return dbg.space();
+    return dbg;
 }
 #endif
 
@@ -870,9 +864,11 @@ QDataStream &operator>>(QDataStream &s, QSizeF &sz)
 #endif // QT_NO_DATASTREAM
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug dbg, const QSizeF &s) {
+QDebug operator<<(QDebug dbg, const QSizeF &s)
+{
+    QDebugStateSaver saver(dbg);
     dbg.nospace() << "QSizeF(" << s.width() << ", " << s.height() << ')';
-    return dbg.space();
+    return dbg;
 }
 #endif
 
diff --git a/src/corelib/tools/qsize.h b/src/corelib/tools/qsize.h
index 76f2ae05f1..6b5cf2dd7d 100644
--- a/src/corelib/tools/qsize.h
+++ b/src/corelib/tools/qsize.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstack.cpp b/src/corelib/tools/qstack.cpp
index bbf0154de0..a1929aa67f 100644
--- a/src/corelib/tools/qstack.cpp
+++ b/src/corelib/tools/qstack.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstack.h b/src/corelib/tools/qstack.h
index 135c4dd527..c3fcf52406 100644
--- a/src/corelib/tools/qstack.h
+++ b/src/corelib/tools/qstack.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstring.cpp b/src/corelib/tools/qstring.cpp
index 3b18d31547..b805ec792e 100644
--- a/src/corelib/tools/qstring.cpp
+++ b/src/corelib/tools/qstring.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Intel Corporation
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -223,8 +215,15 @@ void qt_from_latin1(ushort *dst, const char *str, size_t size)
 
     // we're going to read str[offset..offset+15] (16 bytes)
     for ( ; str + offset + 15 < e; offset += 16) {
-        const __m128i nullMask = _mm_set1_epi32(0);
         const __m128i chunk = _mm_loadu_si128((__m128i*)(str + offset)); // load
+#ifdef __AVX2__
+        // zero extend to an YMM register
+        const __m256i extended = _mm256_cvtepu8_epi16(chunk);
+
+        // store
+        _mm256_storeu_si256((__m256i*)(dst + offset), extended);
+#else
+        const __m128i nullMask = _mm_set1_epi32(0);
 
         // unpack the first 8 bytes, padding with zeros
         const __m128i firstHalf = _mm_unpacklo_epi8(chunk, nullMask);
@@ -233,6 +232,7 @@ void qt_from_latin1(ushort *dst, const char *str, size_t size)
         // unpack the last 8 bytes, padding with zeros
         const __m128i secondHalf = _mm_unpackhi_epi8 (chunk, nullMask);
         _mm_storeu_si128((__m128i*)(dst + offset + 8), secondHalf); // store
+#endif
     }
 
     size = size % 16;
@@ -540,8 +540,20 @@ static int ucstrncmp(const QChar *a, const uchar *c, int l)
     // and c[offset..offset+15] (16 bytes)
     for ( ; uc + offset + 15 < e; offset += 16) {
         // similar to fromLatin1_helper:
-        // load Latin 1 data and expand to UTF-16
+        // load 16 bytes of Latin 1 data
         __m128i chunk = _mm_loadu_si128((__m128i*)(c + offset));
+
+#  ifdef __AVX2__
+        // expand Latin 1 data via zero extension
+        __m256i ldata = _mm256_cvtepu8_epi16(chunk);
+
+        // load UTF-16 data and compare
+        __m256i ucdata = _mm256_loadu_si256((__m256i*)(uc + offset));
+        __m256i result = _mm256_cmpeq_epi16(ldata, ucdata);
+
+        uint mask = ~_mm256_movemask_epi8(result);
+#  else
+        // expand via unpacking
         __m128i firstHalf = _mm_unpacklo_epi8(chunk, nullmask);
         __m128i secondHalf = _mm_unpackhi_epi8(chunk, nullmask);
 
@@ -552,6 +564,7 @@ static int ucstrncmp(const QChar *a, const uchar *c, int l)
         __m128i result2 = _mm_cmpeq_epi16(secondHalf, ucdata2);
 
         uint mask = ~(_mm_movemask_epi8(result1) | _mm_movemask_epi8(result2) << 16);
+#  endif
         if (mask) {
             // found a different character
             uint idx = uint(_bit_scan_forward(mask));
@@ -985,8 +998,7 @@ const QString::Null QString::null = { };
     \endlist
 
     One way to define these preprocessor symbols globally for your
-    application is to add the following entry to your
-    \l{qmake Project Files}{qmake project file}:
+    application is to add the following entry to your \l {Creating Project Files}{qmake project file}:
 
     \snippet code/src_corelib_tools_qstring.cpp 0
 
@@ -1306,7 +1318,7 @@ const QString::Null QString::null = { };
     Returns a copy of the \a str string. The given string is converted
     to Unicode using the fromUtf8() function.
 
-    \sa fromLatin1(), fromLocal8Bit(), fromUtf8()
+    \sa fromLatin1(), fromLocal8Bit(), fromUtf8(), QByteArray::fromStdString()
 */
 
 /*! \fn QString QString::fromStdWString(const std::wstring &str)
@@ -1323,8 +1335,8 @@ const QString::Null QString::null = { };
     \since 4.2
 
     Returns a copy of the \a string, where the encoding of \a string depends on
-    the size of wchar. If wchar is 4 bytes, the \a string is interpreted as ucs-4,
-    if wchar is 2 bytes it is interpreted as ucs-2.
+    the size of wchar. If wchar is 4 bytes, the \a string is interpreted as UCS-4,
+    if wchar is 2 bytes it is interpreted as UTF-16.
 
     If \a size is -1 (default), the \a string has to be 0 terminated.
 
@@ -1359,8 +1371,8 @@ int QString::toUcs4_helper(const ushort *uc, int length, uint *out)
   \since 4.2
 
   Fills the \a array with the data contained in this QString object.
-  The array is encoded in utf16 on platforms where
-  wchar_t is 2 bytes wide (e.g. windows) and in ucs4 on platforms
+  The array is encoded in UTF-16 on platforms where
+  wchar_t is 2 bytes wide (e.g. windows) and in UCS-4 on platforms
   where wchar_t is 4 bytes wide (most Unix systems).
 
   \a array has to be allocated by the caller and contain enough space to
@@ -4087,21 +4099,22 @@ QString QString::right(int n) const
 
 QString QString::mid(int position, int n) const
 {
-    if (position > d->size)
+    using namespace QtPrivate;
+    switch (QContainerImplHelper::mid(d->size, &position, &n)) {
+    case QContainerImplHelper::Null:
         return QString();
-    if (position < 0) {
-        if (n < 0 || n + position >= d->size)
-            return *this;
-        if (n + position <= 0)
-            return QString();
-
-        n += position;
-        position = 0;
-    } else if (uint(n) > uint(d->size - position))
-        n = d->size - position;
-    if (position == 0 && n == d->size)
+    case QContainerImplHelper::Empty:
+    {
+        QStringDataPtr empty = { Data::allocate(0) };
+        return QString(empty);
+    }
+    case QContainerImplHelper::Full:
         return *this;
-    return QString((const QChar*) d->data() + position, n);
+    case QContainerImplHelper::Subset:
+        return QString((const QChar*)d->data() + position, n);
+    }
+    Q_UNREACHABLE();
+    return QString();
 }
 
 /*!
@@ -6163,7 +6176,7 @@ qulonglong QString::toIntegral_helper(const QChar *data, uint len, bool *ok, int
     base 8 is used; otherwise, base 10 is used.
 
     The string conversion will always happen in the 'C' locale. For locale
-    dependent conversion use QLocale::toLong()
+    dependent conversion use QLocale::toLongLong()
 
     Example:
 
@@ -6192,7 +6205,7 @@ long QString::toLong(bool *ok, int base) const
     base 8 is used; otherwise, base 10 is used.
 
     The string conversion will always happen in the 'C' locale. For locale
-    dependent conversion use QLocale::toULong()
+    dependent conversion use QLocale::toULongLong()
 
     Example:
 
@@ -6599,6 +6612,27 @@ QString QString::number(double n, char f, int prec)
     return s;
 }
 
+namespace {
+template<class ResultList, class StringSource, typename MidMethod, typename Separtor>
+static ResultList splitString(const StringSource &source, MidMethod mid, const Separtor &sep,
+                              QString::SplitBehavior behavior, Qt::CaseSensitivity cs, const int separatorSize)
+{
+    ResultList list;
+    int start = 0;
+    int end;
+    int extra = 0;
+    while ((end = source.indexOf(sep, start + extra, cs)) != -1) {
+        if (start != end || behavior == QString::KeepEmptyParts)
+            list.append((source.*mid)(start, end - start));
+        start = end + separatorSize;
+        extra = (separatorSize == 0 ? 1 : 0);
+    }
+    if (start != source.size() || behavior == QString::KeepEmptyParts)
+        list.append((source.*mid)(start, -1));
+    return list;
+}
+} // namespace
+
 /*!
     Splits the string into substrings wherever \a sep occurs, and
     returns the list of those strings. If \a sep does not match
@@ -6619,40 +6653,102 @@ QString QString::number(double n, char f, int prec)
 */
 QStringList QString::split(const QString &sep, SplitBehavior behavior, Qt::CaseSensitivity cs) const
 {
-    QStringList list;
-    int start = 0;
-    int extra = 0;
-    int end;
-    while ((end = indexOf(sep, start + extra, cs)) != -1) {
-        if (start != end || behavior == KeepEmptyParts)
-            list.append(mid(start, end - start));
-        start = end + sep.size();
-        extra = (sep.size() == 0 ? 1 : 0);
-    }
-    if (start != size() || behavior == KeepEmptyParts)
-        list.append(mid(start));
-    return list;
+    return splitString<QStringList>(*this, &QString::mid, sep, behavior, cs, sep.size());
 }
 
 /*!
+    Splits the string into substring references wherever \a sep occurs, and
+    returns the list of those strings. If \a sep does not match
+    anywhere in the string, splitRef() returns a single-element vector
+    containing this string reference.
+
+    \a cs specifies whether \a sep should be matched case
+    sensitively or case insensitively.
+
+    If \a behavior is QString::SkipEmptyParts, empty entries don't
+    appear in the result. By default, empty entries are kept.
+
+    \note All references are valid as long this string is alive. Destroying this
+    string will cause all references be dangling pointers.
+
+    \since 5.4
+    \sa QStringRef split()
+*/
+QVector<QStringRef> QString::splitRef(const QString &sep, SplitBehavior behavior, Qt::CaseSensitivity cs) const
+{
+    return splitString<QVector<QStringRef> >(*this, &QString::midRef, sep, behavior, cs, sep.size());
+}
+/*!
     \overload
 */
 QStringList QString::split(QChar sep, SplitBehavior behavior, Qt::CaseSensitivity cs) const
 {
-    QStringList list;
+    return splitString<QStringList>(*this, &QString::mid, sep, behavior, cs, 1);
+}
+
+/*!
+    \overload
+    \since 5.4
+*/
+QVector<QStringRef> QString::splitRef(QChar sep, SplitBehavior behavior, Qt::CaseSensitivity cs) const
+{
+    return splitString<QVector<QStringRef> >(*this, &QString::midRef, sep, behavior, cs, 1);
+}
+
+/*!
+    Splits the string into substrings references wherever \a sep occurs, and
+    returns the list of those strings. If \a sep does not match
+    anywhere in the string, split() returns a single-element vector
+    containing this string reference.
+
+    \a cs specifies whether \a sep should be matched case
+    sensitively or case insensitively.
+
+    If \a behavior is QString::SkipEmptyParts, empty entries don't
+    appear in the result. By default, empty entries are kept.
+
+    \note All references are valid as long this string is alive. Destroying this
+    string will cause all references be dangling pointers.
+
+    \since 5.4
+*/
+QVector<QStringRef> QStringRef::split(const QString &sep, QString::SplitBehavior behavior, Qt::CaseSensitivity cs) const
+{
+    return splitString<QVector<QStringRef> >(*this, &QStringRef::mid, sep, behavior, cs, sep.size());
+}
+
+/*!
+    \overload
+    \since 5.4
+*/
+QVector<QStringRef> QStringRef::split(QChar sep, QString::SplitBehavior behavior, Qt::CaseSensitivity cs) const
+{
+    return splitString<QVector<QStringRef> >(*this, &QStringRef::mid, sep, behavior, cs, 1);
+}
+
+#ifndef QT_NO_REGEXP
+namespace {
+template<class ResultList, typename MidMethod>
+static ResultList splitString(const QString &source, MidMethod mid, const QRegExp &rx, QString::SplitBehavior behavior)
+{
+    QRegExp rx2(rx);
+    ResultList list;
     int start = 0;
+    int extra = 0;
     int end;
-    while ((end = indexOf(sep, start, cs)) != -1) {
-        if (start != end || behavior == KeepEmptyParts)
-            list.append(mid(start, end - start));
-        start = end + 1;
+    while ((end = rx2.indexIn(source, start + extra)) != -1) {
+        int matchedLen = rx2.matchedLength();
+        if (start != end || behavior == QString::KeepEmptyParts)
+            list.append((source.*mid)(start, end - start));
+        start = end + matchedLen;
+        extra = (matchedLen == 0) ? 1 : 0;
     }
-    if (start != size() || behavior == KeepEmptyParts)
-        list.append(mid(start));
+    if (start != source.size() || behavior == QString::KeepEmptyParts)
+        list.append((source.*mid)(start, -1));
     return list;
 }
+} // namespace
 
-#ifndef QT_NO_REGEXP
 /*!
     \overload
 
@@ -6681,26 +6777,60 @@ QStringList QString::split(QChar sep, SplitBehavior behavior, Qt::CaseSensitivit
 */
 QStringList QString::split(const QRegExp &rx, SplitBehavior behavior) const
 {
-    QRegExp rx2(rx);
-    QStringList list;
-    int start = 0;
-    int extra = 0;
-    int end;
-    while ((end = rx2.indexIn(*this, start + extra)) != -1) {
-        int matchedLen = rx2.matchedLength();
-        if (start != end || behavior == KeepEmptyParts)
-            list.append(mid(start, end - start));
-        start = end + matchedLen;
-        extra = (matchedLen == 0) ? 1 : 0;
-    }
-    if (start != size() || behavior == KeepEmptyParts)
-        list.append(mid(start));
-    return list;
+    return splitString<QStringList>(*this, &QString::mid, rx, behavior);
+}
+
+/*!
+    \overload
+    \since 5.4
+
+    Splits the string into substring references wherever the regular expression
+    \a rx matches, and returns the list of those strings. If \a rx
+    does not match anywhere in the string, splitRef() returns a
+    single-element vector containing this string reference.
+
+    \note All references are valid as long this string is alive. Destroying this
+    string will cause all references be dangling pointers.
+
+    \sa QStringRef split()
+*/
+QVector<QStringRef> QString::splitRef(const QRegExp &rx, SplitBehavior behavior) const
+{
+    return splitString<QVector<QStringRef> >(*this, &QString::midRef, rx, behavior);
 }
 #endif
 
 #ifndef QT_NO_REGULAREXPRESSION
 #ifndef QT_BOOTSTRAPPED
+namespace {
+template<class ResultList, typename MidMethod>
+static ResultList splitString(const QString &source, MidMethod mid, const QRegularExpression &re,
+                              QString::SplitBehavior behavior)
+{
+    ResultList list;
+    if (!re.isValid()) {
+        qWarning("QString::split: invalid QRegularExpression object");
+        return list;
+    }
+
+    int start = 0;
+    int end = 0;
+    QRegularExpressionMatchIterator iterator = re.globalMatch(source);
+    while (iterator.hasNext()) {
+        QRegularExpressionMatch match = iterator.next();
+        end = match.capturedStart();
+        if (start != end || behavior == QString::KeepEmptyParts)
+            list.append((source.*mid)(start, end - start));
+        start = match.capturedEnd();
+    }
+
+    if (start != source.size() || behavior == QString::KeepEmptyParts)
+        list.append((source.*mid)(start, -1));
+
+    return list;
+}
+} // namespace
+
 /*!
     \overload
     \since 5.0
@@ -6730,27 +6860,26 @@ QStringList QString::split(const QRegExp &rx, SplitBehavior behavior) const
 */
 QStringList QString::split(const QRegularExpression &re, SplitBehavior behavior) const
 {
-    QStringList list;
-    if (!re.isValid()) {
-        qWarning("QString::split: invalid QRegularExpression object");
-        return list;
-    }
+    return splitString<QStringList>(*this, &QString::mid, re, behavior);
+}
 
-    int start = 0;
-    int end = 0;
-    QRegularExpressionMatchIterator iterator = re.globalMatch(*this);
-    while (iterator.hasNext()) {
-        QRegularExpressionMatch match = iterator.next();
-        end = match.capturedStart();
-        if (start != end || behavior == KeepEmptyParts)
-            list.append(mid(start, end - start));
-        start = match.capturedEnd();
-    }
+/*!
+    \overload
+    \since 5.4
 
-    if (start != size() || behavior == KeepEmptyParts)
-        list.append(mid(start));
+    Splits the string into substring references wherever the regular expression
+    \a re matches, and returns the list of those strings. If \a re
+    does not match anywhere in the string, splitRef() returns a
+    single-element vector containing this string reference.
 
-    return list;
+    \note All references are valid as long this string is alive. Destroying this
+    string will cause all references be dangling pointers.
+
+    \sa split() QStringRef
+*/
+QVector<QStringRef> QString::splitRef(const QRegularExpression &re, SplitBehavior behavior) const
+{
+    return splitString<QVector<QStringRef> >(*this, &QString::midRef, re, behavior);
 }
 #endif // QT_BOOTSTRAPPED
 #endif // QT_NO_REGULAREXPRESSION
@@ -6935,15 +7064,18 @@ static ArgEscapeData findArgEscapes(const QString &s)
                 break;
         }
 
-        if (c->digitValue() == -1)
+        int escape = c->digitValue();
+        if (escape == -1)
             continue;
 
-        int escape = c->digitValue();
         ++c;
 
-        if (c != uc_end && c->digitValue() != -1) {
-            escape = (10 * escape) + c->digitValue();
-            ++c;
+        if (c != uc_end) {
+            int next_escape = c->digitValue();
+            if (next_escape != -1) {
+                escape = (10 * escape) + next_escape;
+                ++c;
+            }
         }
 
         if (escape > d.min_escape)
@@ -7720,7 +7852,7 @@ bool QString::isRightToLeft() const
     This method is mostly useful to pass a QString to a function
     that accepts a std::string object.
 
-    \sa toLatin1(), toUtf8(), toLocal8Bit()
+    \sa toLatin1(), toUtf8(), toLocal8Bit(), QByteArray::toStdString()
 */
 
 /*!
@@ -8311,6 +8443,30 @@ QDataStream &operator>>(QDataStream &in, QString &str)
     \sa {Implicitly Shared Classes}
 */
 
+/*!
+    \typedef QStringRef::size_type
+    \internal
+*/
+
+/*!
+    \typedef QStringRef::value_type
+    \internal
+*/
+
+/*!
+    \typedef QStringRef::const_pointer
+    \internal
+*/
+
+/*!
+    \typedef QStringRef::const_reference
+    \internal
+*/
+
+/*!
+    \typedef QStringRef::const_iterator
+    \internal
+*/
 
 /*!
  \fn QStringRef::QStringRef()
@@ -8434,6 +8590,36 @@ ownership of it, no memory is freed when instances are destroyed.
 */
 
 /*!
+    \fn const QChar *QStringRef::begin() const
+    \since 5.4
+
+    Same as unicode().
+*/
+
+/*!
+    \fn const QChar *QStringRef::cbegin() const
+    \since 5.4
+
+    Same as unicode().
+*/
+
+/*!
+    \fn const QChar *QStringRef::end() const
+    \since 5.4
+
+    Returns a pointer to one character past the last one in this string.
+    (It is the same as \c {unicode() + size()}.)
+*/
+
+/*!
+    \fn const QChar *QStringRef::cend() const
+    \since 5.4
+
+    Returns a pointer to one character past the last one in this string.
+    (It is the same as \c {unicode() + size()}.)
+*/
+
+/*!
     \fn const QChar *QStringRef::constData() const
 
     Same as unicode().
@@ -8876,19 +9062,19 @@ QStringRef QString::rightRef(int n) const
 */
 QStringRef QStringRef::mid(int pos, int n) const
 {
-    if (pos > m_size)
+    using namespace QtPrivate;
+    switch (QContainerImplHelper::mid(m_size, &pos, &n)) {
+    case QContainerImplHelper::Null:
         return QStringRef();
-    if (pos < 0) {
-        if (n < 0 || n + pos >= m_size)
-            return QStringRef(m_string, m_position, m_size);
-        if (n + pos <= 0)
-            return QStringRef();
-        n += pos;
-        pos = 0;
-    } else if (uint(n) > uint(m_size - pos)) {
-        n = m_size - pos;
+    case QContainerImplHelper::Empty:
+        return QStringRef(m_string, 0, 0);
+    case QContainerImplHelper::Full:
+        return *this;
+    case QContainerImplHelper::Subset:
+        return QStringRef(m_string, pos + m_position, n);
     }
-    return QStringRef(m_string, pos + m_position, n);
+    Q_UNREACHABLE();
+    return QStringRef();
 }
 
 /*!
@@ -8913,19 +9099,19 @@ QStringRef QStringRef::mid(int pos, int n) const
 */
 QStringRef QString::midRef(int position, int n) const
 {
-    if (position > d->size)
+    using namespace QtPrivate;
+    switch (QContainerImplHelper::mid(d->size, &position, &n)) {
+    case QContainerImplHelper::Null:
         return QStringRef();
-    if (position < 0) {
-        if (n < 0 || n + position >= d->size)
-            return QStringRef(this, 0, d->size);
-        if (n + position <= 0)
-            return QStringRef();
-
-        n += position;
-        position = 0;
-    } else if (uint(n) > uint(d->size - position))
-        n = d->size - position;
-    return QStringRef(this, position, n);
+    case QContainerImplHelper::Empty:
+        return QStringRef(this, 0, 0);
+    case QContainerImplHelper::Full:
+        return QStringRef(this, 0, d->size);
+    case QContainerImplHelper::Subset:
+        return QStringRef(this, position, n);
+    }
+    Q_UNREACHABLE();
+    return QStringRef();
 }
 
 /*!
@@ -9748,7 +9934,7 @@ long QStringRef::toLong(bool *ok, int base) const
     base 8 is used; otherwise, base 10 is used.
 
     The string conversion will always happen in the 'C' locale. For locale
-    dependent conversion use QLocale::toULong()
+    dependent conversion use QLocale::toULongLong()
 
     \sa QString::toULong()
 
diff --git a/src/corelib/tools/qstring.h b/src/corelib/tools/qstring.h
index 52b382985e..a12946e23c 100644
--- a/src/corelib/tools/qstring.h
+++ b/src/corelib/tools/qstring.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -441,13 +433,19 @@ public:
 
     QStringList split(const QString &sep, SplitBehavior behavior = KeepEmptyParts,
                       Qt::CaseSensitivity cs = Qt::CaseSensitive) const Q_REQUIRED_RESULT;
+    QVector<QStringRef> splitRef(const QString &sep, SplitBehavior behavior = KeepEmptyParts,
+                      Qt::CaseSensitivity cs = Qt::CaseSensitive) const Q_REQUIRED_RESULT;
     QStringList split(QChar sep, SplitBehavior behavior = KeepEmptyParts,
                       Qt::CaseSensitivity cs = Qt::CaseSensitive) const Q_REQUIRED_RESULT;
+    QVector<QStringRef> splitRef(QChar sep, SplitBehavior behavior = KeepEmptyParts,
+                      Qt::CaseSensitivity cs = Qt::CaseSensitive) const Q_REQUIRED_RESULT;
 #ifndef QT_NO_REGEXP
     QStringList split(const QRegExp &sep, SplitBehavior behavior = KeepEmptyParts) const Q_REQUIRED_RESULT;
+    QVector<QStringRef> splitRef(const QRegExp &sep, SplitBehavior behavior = KeepEmptyParts) const Q_REQUIRED_RESULT;
 #endif
 #ifndef QT_NO_REGULAREXPRESSION
     QStringList split(const QRegularExpression &sep, SplitBehavior behavior = KeepEmptyParts) const Q_REQUIRED_RESULT;
+    QVector<QStringRef> splitRef(const QRegularExpression &sep, SplitBehavior behavior = KeepEmptyParts) const Q_REQUIRED_RESULT;
 #endif
     enum NormalizationForm {
         NormalizationForm_D,
@@ -724,7 +722,6 @@ private:
 
     void reallocData(uint alloc, bool grow = false);
     void expand(int i);
-    void updateProperties() const;
     QString multiArg(int numArgs, const QString **args) const;
     static int compare_helper(const QChar *data1, int length1,
                               const QChar *data2, int length2,
@@ -1222,7 +1219,7 @@ inline QT_ASCII_CAST_WARN const QString operator+(const QString &s, const QByteA
 #endif // QT_USE_QSTRINGBUILDER
 
 inline std::string QString::toStdString() const
-{ const QByteArray asc = toUtf8(); return std::string(asc.constData(), asc.length()); }
+{ return toUtf8().toStdString(); }
 
 inline QString QString::fromStdString(const std::string &s)
 { return fromUtf8(s.data(), int(s.size())); }
@@ -1259,6 +1256,12 @@ class Q_CORE_EXPORT QStringRef {
     int m_position;
     int m_size;
 public:
+    typedef QString::size_type size_type;
+    typedef QString::value_type value_type;
+    typedef QString::const_iterator const_iterator;
+    typedef QString::const_pointer const_pointer;
+    typedef QString::const_reference const_reference;
+
     // ### Qt 6: make this constructor constexpr, after the destructor is made trivial
     inline QStringRef():m_string(0), m_position(0), m_size(0){}
     inline QStringRef(const QString *string, int position, int size);
@@ -1300,6 +1303,11 @@ public:
     int count(QChar c, Qt::CaseSensitivity cs = Qt::CaseSensitive) const;
     int count(const QStringRef &s, Qt::CaseSensitivity cs = Qt::CaseSensitive) const;
 
+    QVector<QStringRef> split(const QString &sep, QString::SplitBehavior behavior = QString::KeepEmptyParts,
+                      Qt::CaseSensitivity cs = Qt::CaseSensitive) const Q_REQUIRED_RESULT;
+    QVector<QStringRef> split(QChar sep, QString::SplitBehavior behavior = QString::KeepEmptyParts,
+                      Qt::CaseSensitivity cs = Qt::CaseSensitive) const Q_REQUIRED_RESULT;
+
     QStringRef left(int n) const Q_REQUIRED_RESULT;
     QStringRef right(int n) const Q_REQUIRED_RESULT;
     QStringRef mid(int pos, int n = -1) const Q_REQUIRED_RESULT;
@@ -1323,6 +1331,10 @@ public:
     }
     inline const QChar *data() const { return unicode(); }
     inline const QChar *constData() const {  return unicode(); }
+    inline const QChar *begin() const { return unicode(); }
+    inline const QChar *cbegin() const { return unicode(); }
+    inline const QChar *end() const { return unicode() + size(); }
+    inline const QChar *cend() const { return unicode() + size(); }
 
 #if QT_DEPRECATED_SINCE(5, 0)
     QT_DEPRECATED QByteArray toAscii() const Q_REQUIRED_RESULT
diff --git a/src/corelib/tools/qstring_compat.cpp b/src/corelib/tools/qstring_compat.cpp
index 6613dfde8e..c776092569 100644
--- a/src/corelib/tools/qstring_compat.cpp
+++ b/src/corelib/tools/qstring_compat.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstringbuilder.cpp b/src/corelib/tools/qstringbuilder.cpp
index e4c4d3e426..fb036f49a5 100644
--- a/src/corelib/tools/qstringbuilder.cpp
+++ b/src/corelib/tools/qstringbuilder.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstringbuilder.h b/src/corelib/tools/qstringbuilder.h
index befa40081c..b18ec39c39 100644
--- a/src/corelib/tools/qstringbuilder.h
+++ b/src/corelib/tools/qstringbuilder.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstringiterator.qdoc b/src/corelib/tools/qstringiterator.qdoc
index 510d5fbccf..ff0a097cb9 100644
--- a/src/corelib/tools/qstringiterator.qdoc
+++ b/src/corelib/tools/qstringiterator.qdoc
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,7 +69,7 @@
     respectively after and behind the iterator's current position, but they
     will not return the code point the iterator has moved through.
 
-    \section1 Unicode handling
+    \section1 Unicode Handling
 
     QString and all of its functions work in terms of UTF-16 code units. Unicode code points
     that fall outside the Basic Multilingual Plane (U+10000 to U+10FFFF) will therefore
@@ -99,7 +91,7 @@
     a decoding problem; please refer to the each function documentation for
     more details.
 
-    \section1 Unchecked iteration
+    \section1 Unchecked Iteration
 
     It is possible to optimize iterating over a QString contents by skipping
     some checks. This is in general not safe to do, because a QString is allowed
diff --git a/src/corelib/tools/qstringiterator_p.h b/src/corelib/tools/qstringiterator_p.h
index 4ae705b085..b80193b790 100644
--- a/src/corelib/tools/qstringiterator_p.h
+++ b/src/corelib/tools/qstringiterator_p.h
@@ -6,36 +6,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstringlist.cpp b/src/corelib/tools/qstringlist.cpp
index 6b0b39c7bb..4e5393e0b0 100644
--- a/src/corelib/tools/qstringlist.cpp
+++ b/src/corelib/tools/qstringlist.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -98,7 +90,7 @@ QT_BEGIN_NAMESPACE
 
     \tableofcontents
 
-    \section1 Adding strings
+    \section1 Adding Strings
 
     Strings can be added to a list using the \l
     {QList::append()}{append()}, \l
@@ -107,7 +99,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet qstringlist/main.cpp 0
 
-    \section1 Iterating over the strings
+    \section1 Iterating Over the Strings
 
     To iterate over a list, you can either use index positions or
     QList's Java-style and STL-style iterator types:
@@ -129,7 +121,7 @@ QT_BEGIN_NAMESPACE
     QMutableStringListIterator class which is a type definition for
     QMutableListIterator<QString>.
 
-    \section1 Manipulating the strings
+    \section1 Manipulating the Strings
 
     QStringList provides several functions allowing you to manipulate
     the contents of a list. You can concatenate all the strings in a
@@ -191,20 +183,6 @@ QT_BEGIN_NAMESPACE
 */
 
 /*!
-    \fn QStringList::QStringList(const QStringList &other)
-
-    Constructs a copy of the \a other string list.
-
-    This operation takes \l{constant time} because QStringList is
-    \l{implicitly shared}, making the process of returning a
-    QStringList from a function very fast. If a shared instance is
-    modified, it will be copied (copy-on-write), and that takes
-    \l{linear time}.
-
-    \sa operator=()
-*/
-
-/*!
     \fn QStringList::QStringList(const QList<QString> &other)
 
     Constructs a copy of \a other.
@@ -218,6 +196,37 @@ QT_BEGIN_NAMESPACE
 */
 
 /*!
+    \fn QStringList::QStringList(QList<QString> &&other)
+    \overload
+    \since 5.4
+
+    Move-constructs from QList<QString>.
+
+    After a successful construction, \a other will be empty.
+*/
+
+/*!
+    \fn QStringList &QStringList::operator=(const QList<QString> &other)
+    \since 5.4
+
+    Copy assignment operator from QList<QString>. Assigns the \a other
+    list of strings to this string list.
+
+    After the operation, \a other and \c *this will be equal.
+*/
+
+/*!
+    \fn QStringList &QStringList::operator=(QList<QString> &&other)
+    \overload
+    \since 5.4
+
+    Move assignment operator from QList<QString>. Moves the \a other
+    list of strings to this string list.
+
+    After the operation, \a other will be empty.
+*/
+
+/*!
     \fn void QStringList::sort(Qt::CaseSensitivity cs)
 
     Sorts the list of strings in ascending order.
@@ -235,9 +244,14 @@ QT_BEGIN_NAMESPACE
     integer index.
 */
 
-static inline bool caseInsensitiveLessThan(const QString &s1, const QString &s2)
-{
-   return s1.compare(s2, Qt::CaseInsensitive) < 0;
+namespace {
+struct CaseInsensitiveLessThan {
+    typedef bool result_type;
+    result_type operator()(const QString &s1, const QString &s2) const
+    {
+        return s1.compare(s2, Qt::CaseInsensitive) < 0;
+    }
+};
 }
 
 void QtPrivate::QStringList_sort(QStringList *that, Qt::CaseSensitivity cs)
@@ -245,7 +259,7 @@ void QtPrivate::QStringList_sort(QStringList *that, Qt::CaseSensitivity cs)
     if (cs == Qt::CaseSensitive)
         std::sort(that->begin(), that->end());
     else
-        std::sort(that->begin(), that->end(), caseInsensitiveLessThan);
+        std::sort(that->begin(), that->end(), CaseInsensitiveLessThan());
 }
 
 
@@ -457,7 +471,7 @@ QString QtPrivate::QStringList_join(const QStringList *that, const QChar *sep, i
     if (totalLength == 0)
         return res;
     res.reserve(totalLength);
-    for (int i = 0; i < that->size(); ++i) {
+    for (int i = 0; i < size; ++i) {
         if (i)
             res.append(sep, seplen);
         res += that->at(i);
@@ -492,6 +506,16 @@ QString QtPrivate::QStringList_join(const QStringList *that, const QChar *sep, i
     the latter string list.
 */
 
+/*!
+    \fn QStringList &QStringList::operator<<(const QList<QString> &other)
+    \since 5.4
+
+    \overload
+
+    Appends the \a other string list to the string list and returns a reference to
+    the latter string list.
+*/
+
 #ifndef QT_NO_DATASTREAM
 /*!
     \fn QDataStream &operator>>(QDataStream &in, QStringList &list)
@@ -719,13 +743,15 @@ int QtPrivate::QStringList_removeDuplicates(QStringList *that)
     int j = 0;
     QSet<QString> seen;
     seen.reserve(n);
+    int setSize = 0;
     for (int i = 0; i < n; ++i) {
         const QString &s = that->at(i);
-        if (seen.contains(s))
-            continue;
         seen.insert(s);
+        if (setSize == seen.size()) // unchanged size => was already seen
+            continue;
+        ++setSize;
         if (j != i)
-            (*that)[j] = s;
+            that->swap(i, j);
         ++j;
     }
     if (n != j)
diff --git a/src/corelib/tools/qstringlist.h b/src/corelib/tools/qstringlist.h
index a962b7c528..b24a261a7c 100644
--- a/src/corelib/tools/qstringlist.h
+++ b/src/corelib/tools/qstringlist.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,12 +55,21 @@ class QStringList : public QList<QString>
 public:
     inline QStringList() { }
     inline explicit QStringList(const QString &i) { append(i); }
-    inline QStringList(const QStringList &l) : QList<QString>(l) { }
     inline QStringList(const QList<QString> &l) : QList<QString>(l) { }
+#ifdef Q_COMPILER_RVALUE_REFS
+    inline QStringList(QList<QString> &&l) : QList<QString>(std::move(l)) { }
+#endif
 #ifdef Q_COMPILER_INITIALIZER_LISTS
     inline QStringList(std::initializer_list<QString> args) : QList<QString>(args) { }
 #endif
 
+    QStringList &operator=(const QList<QString> &other)
+    { QList<QString>::operator=(other); return *this; }
+#ifdef Q_COMPILER_RVALUE_REFS
+    QStringList &operator=(QList<QString> &&other)
+    { QList<QString>::operator=(std::move(other)); return *this; }
+#endif
+
     inline void sort(Qt::CaseSensitivity cs = Qt::CaseSensitive);
     inline int removeDuplicates();
 
@@ -86,6 +87,8 @@ public:
     { append(str); return *this; }
     inline QStringList &operator<<(const QStringList &l)
     { *this += l; return *this; }
+    inline QStringList &operator<<(const QList<QString> &l)
+    { *this += l; return *this; }
 
 #ifndef QT_NO_REGEXP
     inline QStringList filter(const QRegExp &rx) const;
diff --git a/src/corelib/tools/qstringmatcher.cpp b/src/corelib/tools/qstringmatcher.cpp
index 1b8a40ef2f..ad6f644702 100644
--- a/src/corelib/tools/qstringmatcher.cpp
+++ b/src/corelib/tools/qstringmatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qstringmatcher.h b/src/corelib/tools/qstringmatcher.h
index 792b97591a..00e5fc1587 100644
--- a/src/corelib/tools/qstringmatcher.h
+++ b/src/corelib/tools/qstringmatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtextboundaryfinder.cpp b/src/corelib/tools/qtextboundaryfinder.cpp
index 3063483da6..3df2c62a39 100644
--- a/src/corelib/tools/qtextboundaryfinder.cpp
+++ b/src/corelib/tools/qtextboundaryfinder.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtextboundaryfinder.h b/src/corelib/tools/qtextboundaryfinder.h
index 81cd0dddf0..60ed9ddf5b 100644
--- a/src/corelib/tools/qtextboundaryfinder.h
+++ b/src/corelib/tools/qtextboundaryfinder.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtimeline.cpp b/src/corelib/tools/qtimeline.cpp
index 3619c9e986..4800f22f01 100644
--- a/src/corelib/tools/qtimeline.cpp
+++ b/src/corelib/tools/qtimeline.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -175,8 +167,8 @@ void QTimeLinePrivate::setCurrentTime(int msecs)
     milliseconds to QTimeLine's constructor. The timeline's duration describes
     for how long the animation will run. Then you set a suitable frame range
     by calling setFrameRange(). Finally connect the frameChanged() signal to a
-    suitable slot in the widget you wish to animate (e.g., setValue() in
-    QProgressBar). When you proceed to calling start(), QTimeLine will enter
+    suitable slot in the widget you wish to animate (for example, \l {QProgressBar::}{setValue()}
+    in QProgressBar). When you proceed to calling start(), QTimeLine will enter
     Running state, and start emitting frameChanged() at regular intervals,
     causing your widget's connected property's value to grow from the lower
     end to the upper and of your frame range, at a steady rate. You can
diff --git a/src/corelib/tools/qtimeline.h b/src/corelib/tools/qtimeline.h
index be2a4ae734..8e577c2651 100644
--- a/src/corelib/tools/qtimeline.h
+++ b/src/corelib/tools/qtimeline.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtimezone.cpp b/src/corelib/tools/qtimezone.cpp
index e17ff2b249..0f8f4937b9 100644
--- a/src/corelib/tools/qtimezone.cpp
+++ b/src/corelib/tools/qtimezone.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #include "qtimezone.h"
 #include "qtimezoneprivate_p.h"
 
+#include <QtCore/qdatastream.h>
 #include <QtCore/qdatetime.h>
 
 #include <qdebug.h>
diff --git a/src/corelib/tools/qtimezone.h b/src/corelib/tools/qtimezone.h
index b038d66a65..ffc2316b5f 100644
--- a/src/corelib/tools/qtimezone.h
+++ b/src/corelib/tools/qtimezone.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtimezoneprivate.cpp b/src/corelib/tools/qtimezoneprivate.cpp
index 4286119586..e768905462 100644
--- a/src/corelib/tools/qtimezoneprivate.cpp
+++ b/src/corelib/tools/qtimezoneprivate.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 #include "qtimezoneprivate_p.h"
 #include "qtimezoneprivate_data_p.h"
 
+#include <qdatastream.h>
 #include <qdebug.h>
 
 QT_BEGIN_NAMESPACE
@@ -446,32 +439,43 @@ QTimeZone::OffsetData QTimeZonePrivate::toOffsetData(const QTimeZonePrivate::Dat
 bool QTimeZonePrivate::isValidId(const QByteArray &ianaId)
 {
     // Rules for defining TZ/IANA names as per ftp://ftp.iana.org/tz/code/Theory
-    // * Use only valid POSIX file name components
-    // * Within a file name component, use only ASCII letters, `.', `-' and `_'.
-    // * Do not use digits
-    // * A file name component must not exceed 14 characters or start with `-'
-    // Aliases such as "Etc/GMT+7" and "SystemV/EST5EDT" are valid so we need to accept digits
-    if (ianaId.contains(' '))
-        return false;
-    QList<QByteArray> parts = ianaId.split('/');
-    foreach (const QByteArray &part, parts) {
-        if (part.size() > 14 || part.size() < 1)
-            return false;
-        if (part.at(0) == '-')
-            return false;
-        for (int i = 0; i < part.size(); ++i) {
-            QChar ch = part.at(i);
-            if (!(ch >= 'a' && ch <= 'z')
+    // 1. Use only valid POSIX file name components
+    // 2. Within a file name component, use only ASCII letters, `.', `-' and `_'.
+    // 3. Do not use digits
+    // 4. A file name component must not exceed 14 characters or start with `-'
+    // Aliases such as "Etc/GMT+7" and "SystemV/EST5EDT" are valid so we need to accept digits, ':', and '+'.
+
+    // The following would be preferable if QRegExp would work on QByteArrays directly:
+    // const QRegExp rx(QStringLiteral("[a-z0-9:+._][a-z0-9:+._-]{,13}(?:/[a-z0-9:+._][a-z0-9:+._-]{,13})*"),
+    //                  Qt::CaseInsensitive);
+    // return rx.exactMatch(ianaId);
+
+    // hand-rolled version:
+    const int MinSectionLength = 1;
+    const int MaxSectionLength = 14;
+    int sectionLength = 0;
+    for (const char *it = ianaId.begin(), * const end = ianaId.end(); it != end; ++it, ++sectionLength) {
+        const char ch = *it;
+        if (ch == '/') {
+            if (sectionLength < MinSectionLength || sectionLength > MaxSectionLength)
+                return false; // violates (4)
+            sectionLength = -1;
+        } else if (ch == '-') {
+            if (sectionLength == 0)
+                return false; // violates (4)
+        } else if (!(ch >= 'a' && ch <= 'z')
                 && !(ch >= 'A' && ch <= 'Z')
                 && !(ch == '_')
                 && !(ch >= '0' && ch <= '9')
                 && !(ch == '-')
                 && !(ch == '+')
                 && !(ch == ':')
-                && !(ch == '.'))
-                return false;
+                && !(ch == '.')) {
+            return false; // violates (2)
         }
     }
+    if (sectionLength < MinSectionLength || sectionLength > MaxSectionLength)
+        return false; // violates (4)
     return true;
 }
 
@@ -558,8 +562,8 @@ template<> QTimeZonePrivate *QSharedDataPointer<QTimeZonePrivate>::clone()
 // Create default UTC time zone
 QUtcTimeZonePrivate::QUtcTimeZonePrivate()
 {
-    const QString name = QStringLiteral("UTC");
-    init(QByteArrayLiteral("UTC"), 0, name, name, QLocale::AnyCountry, name);
+    const QString name = utcQString();
+    init(utcQByteArray(), 0, name, name, QLocale::AnyCountry, name);
 }
 
 // Create a named UTC time zone
@@ -583,7 +587,7 @@ QUtcTimeZonePrivate::QUtcTimeZonePrivate(qint32 offsetSeconds)
     QString utcId;
 
     if (offsetSeconds == 0)
-        utcId = QStringLiteral("UTC");
+        utcId = utcQString();
     else
         utcId = isoOffsetFormat(offsetSeconds);
 
@@ -675,7 +679,7 @@ qint32 QUtcTimeZonePrivate::daylightTimeOffset(qint64 atMSecsSinceEpoch) const
 
 QByteArray QUtcTimeZonePrivate::systemTimeZoneId() const
 {
-    return QByteArrayLiteral("UTC");
+    return utcQByteArray();
 }
 
 QSet<QByteArray> QUtcTimeZonePrivate::availableTimeZoneIds() const
diff --git a/src/corelib/tools/qtimezoneprivate_data_p.h b/src/corelib/tools/qtimezoneprivate_data_p.h
index 0ae6f0a722..6597ba8374 100644
--- a/src/corelib/tools/qtimezoneprivate_data_p.h
+++ b/src/corelib/tools/qtimezoneprivate_data_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtimezoneprivate_icu.cpp b/src/corelib/tools/qtimezoneprivate_icu.cpp
index 254900eb96..bc54d245b9 100644
--- a/src/corelib/tools/qtimezoneprivate_icu.cpp
+++ b/src/corelib/tools/qtimezoneprivate_icu.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qtimezoneprivate_p.h b/src/corelib/tools/qtimezoneprivate_p.h
index 417ee2efbf..5ba42de560 100644
--- a/src/corelib/tools/qtimezoneprivate_p.h
+++ b/src/corelib/tools/qtimezoneprivate_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -154,6 +146,17 @@ public:
     static QList<QByteArray> windowsIdToIanaIds(const QByteArray &windowsId,
                                                  QLocale::Country country);
 
+    // returns "UTC" QString and QByteArray
+    static inline QString utcQString() Q_REQUIRED_RESULT
+    {
+        return QStringLiteral("UTC");
+    }
+
+    static inline QByteArray utcQByteArray() Q_REQUIRED_RESULT
+    {
+        return QByteArrayLiteral("UTC");
+    }
+
 protected:
     QByteArray m_id;
 };
diff --git a/src/corelib/tools/qtimezoneprivate_tz.cpp b/src/corelib/tools/qtimezoneprivate_tz.cpp
index b4ea91e626..f93b17f505 100644
--- a/src/corelib/tools/qtimezoneprivate_tz.cpp
+++ b/src/corelib/tools/qtimezoneprivate_tz.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 
 #include <QtCore/QFile>
 #include <QtCore/QHash>
+#include <QtCore/QDataStream>
 #include <QtCore/QDateTime>
 
 #include <qdebug.h>
@@ -958,7 +951,7 @@ QByteArray QTzTimeZonePrivate::systemTimeZoneId() const
 
     // Give up for now and return UTC
     if (ianaId.isEmpty())
-        ianaId = QByteArrayLiteral("UTC");
+        ianaId = utcQByteArray();
 
     return ianaId;
 }
diff --git a/src/corelib/tools/qtimezoneprivate_win.cpp b/src/corelib/tools/qtimezoneprivate_win.cpp
index 052e584855..e41721c712 100644
--- a/src/corelib/tools/qtimezoneprivate_win.cpp
+++ b/src/corelib/tools/qtimezoneprivate_win.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -249,7 +241,7 @@ static QByteArray windowsSystemZoneId()
     }
 
     // If we can't determine the current ID use UTC
-    return QByteArrayLiteral("UTC");
+    return QTimeZonePrivate::utcQByteArray();
 }
 
 static QDate calculateTransitionLocalDate(const SYSTEMTIME &rule, int year)
@@ -635,7 +627,7 @@ QByteArray QWinTimeZonePrivate::systemTimeZoneId() const
         ianaId = windowsIdToDefaultIanaId(windowsId);
         // If no global default then probably an unknown Windows ID so return UTC
         if (ianaId.isEmpty())
-            return QByteArrayLiteral("UTC");
+            return utcQByteArray();
     }
     return ianaId;
 }
diff --git a/src/corelib/tools/qtools_p.h b/src/corelib/tools/qtools_p.h
index b00343dd39..3876d3822c 100644
--- a/src/corelib/tools/qtools_p.h
+++ b/src/corelib/tools/qtools_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,7 +50,7 @@
 QT_BEGIN_NAMESPACE
 
 // implemented in qbytearray.cpp
-int Q_CORE_EXPORT qAllocMore(int alloc, int extra);
+int Q_CORE_EXPORT qAllocMore(int alloc, int extra) Q_DECL_NOTHROW;
 
 QT_END_NAMESPACE
 
diff --git a/src/corelib/tools/qunicodetables.cpp b/src/corelib/tools/qunicodetables.cpp
index 41a22a779a..072e8ad920 100644
--- a/src/corelib/tools/qunicodetables.cpp
+++ b/src/corelib/tools/qunicodetables.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -6920,24 +6912,24 @@ static const Properties uc_properties[] = {
     { 12, 0, 0, 0, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 12, 0 }
 };
 
-static inline const Properties *qGetProp(uint ucs4)
+Q_DECL_CONST_FUNCTION static inline const Properties *qGetProp(uint ucs4)
 {
     const int index = GET_PROP_INDEX(ucs4);
     return uc_properties + index;
 }
 
-static inline const Properties *qGetProp(ushort ucs2)
+Q_DECL_CONST_FUNCTION static inline const Properties *qGetProp(ushort ucs2)
 {
     const int index = GET_PROP_INDEX_UCS2(ucs2);
     return uc_properties + index;
 }
 
-Q_CORE_EXPORT const Properties * QT_FASTCALL properties(uint ucs4)
+Q_DECL_CONST_FUNCTION Q_CORE_EXPORT const Properties * QT_FASTCALL properties(uint ucs4)
 {
     return qGetProp(ucs4);
 }
 
-Q_CORE_EXPORT const Properties * QT_FASTCALL properties(ushort ucs2)
+Q_DECL_CONST_FUNCTION Q_CORE_EXPORT const Properties * QT_FASTCALL properties(ushort ucs2)
 {
     return qGetProp(ucs2);
 }
diff --git a/src/corelib/tools/qunicodetables_p.h b/src/corelib/tools/qunicodetables_p.h
index ec9607b817..64e1ad12b5 100644
--- a/src/corelib/tools/qunicodetables_p.h
+++ b/src/corelib/tools/qunicodetables_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qunicodetools.cpp b/src/corelib/tools/qunicodetools.cpp
index bb2c032e57..71c9d82d80 100644
--- a/src/corelib/tools/qunicodetools.cpp
+++ b/src/corelib/tools/qunicodetools.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qunicodetools_p.h b/src/corelib/tools/qunicodetools_p.h
index 8201861a43..c4af52f3b6 100644
--- a/src/corelib/tools/qunicodetools_p.h
+++ b/src/corelib/tools/qunicodetools_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qvarlengtharray.h b/src/corelib/tools/qvarlengtharray.h
index bfa0bbbbb1..7ce2b49ff2 100644
--- a/src/corelib/tools/qvarlengtharray.h
+++ b/src/corelib/tools/qvarlengtharray.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qvector.cpp b/src/corelib/tools/qvector.cpp
index 89396540e0..99e1db1cab 100644
--- a/src/corelib/tools/qvector.cpp
+++ b/src/corelib/tools/qvector.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -180,11 +172,11 @@
 /*!
     \fn QVector<T> QVector::mid(int pos, int length = -1) const
 
-    Returns a vector whose elements are copied from this vector,
+    Returns a sub-vector which contains elements from this vector,
     starting at position \a pos. If \a length is -1 (the default), all
-    elements after \a pos are copied; otherwise \a length elements (or
+    elements after \a pos are included; otherwise \a length elements (or
     all remaining elements if there are less than \a length elements)
-    are copied.
+    are included.
 */
 
 
@@ -576,6 +568,28 @@
     \sa remove(), QList::removeAt()
 */
 
+/*! \fn int QVector::removeAll(const T &t)
+    \since 5.4
+
+    Removes all elements that compare equal to \a t from the
+    vector. Returns the number of elements removed, if any.
+
+    Provided for compatibility with QList.
+
+    \sa removeOne(), QList::removeAll()
+*/
+
+/*! \fn bool QVector::removeOne(const T &t)
+    \since 5.4
+
+    Removes the first element that compares equal to \a t from the
+    vector. Returns whether an element was, in fact, removed.
+
+    Provided for compatibility with QList.
+
+    \sa removeAll(), QList::removeOne()
+*/
+
 /*! \fn int QVector::length() const
     \since 5.2
 
diff --git a/src/corelib/tools/qvector.h b/src/corelib/tools/qvector.h
index 6f7c534085..07c66bc393 100644
--- a/src/corelib/tools/qvector.h
+++ b/src/corelib/tools/qvector.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -156,6 +148,24 @@ public:
 
     // QList compatibility
     void removeAt(int i) { remove(i); }
+    int removeAll(const T &t)
+    {
+        const const_iterator ce = this->cend(), cit = std::find(this->cbegin(), ce, t);
+        if (cit == ce)
+            return 0;
+        const iterator e = end(), it = std::remove(c2m(cit), e, t);
+        const int result = std::distance(it, e);
+        erase(it, e);
+        return result;
+    }
+    bool removeOne(const T &t)
+    {
+        const int i = indexOf(t);
+        if (i < 0)
+            return false;
+        remove(i);
+        return true;
+    }
     int length() const { return size(); }
     T takeAt(int i) { T t = at(i); remove(i); return t; }
 
@@ -238,7 +248,7 @@ public:
     static inline QVector<T> fromStdVector(const std::vector<T> &vector)
     { QVector<T> tmp; tmp.reserve(int(vector.size())); std::copy(vector.begin(), vector.end(), std::back_inserter(tmp)); return tmp; }
     inline std::vector<T> toStdVector() const
-    { std::vector<T> tmp; tmp.reserve(size()); std::copy(constBegin(), constEnd(), std::back_inserter(tmp)); return tmp; }
+    { return std::vector<T>(d->begin(), d->end()); }
 private:
     friend class QRegion; // Optimization for QRegion::rects()
 
@@ -252,6 +262,7 @@ private:
     {
         return (i <= d->end()) && (d->begin() <= i);
     }
+    iterator c2m(const_iterator it) { return begin() + (it - cbegin()); }
     class AlignmentDummy { Data header; T array[1]; };
 };
 
@@ -692,10 +703,10 @@ typename QVector<T>::iterator QVector<T>::erase(iterator abegin, iterator aend)
 template <typename T>
 bool QVector<T>::operator==(const QVector<T> &v) const
 {
-    if (d->size != v.d->size)
-        return false;
     if (d == v.d)
         return true;
+    if (d->size != v.d->size)
+        return false;
     T* b = d->begin();
     T* i = b + d->size;
     T* j = v.d->end();
@@ -791,29 +802,32 @@ bool QVector<T>::contains(const T &t) const
 template <typename T>
 int QVector<T>::count(const T &t) const
 {
-    int c = 0;
-    T* b = d->begin();
-    T* i = d->end();
-    while (i != b)
-        if (*--i == t)
-            ++c;
-    return c;
+    const T *b = d->begin();
+    const T *e = d->end();
+    return int(std::count(b, e, t));
 }
 
 template <typename T>
 Q_OUTOFLINE_TEMPLATE QVector<T> QVector<T>::mid(int pos, int len) const
 {
-    if (len < 0)
-        len = size() - pos;
-    if (pos == 0 && len == size())
+    using namespace QtPrivate;
+    switch (QContainerImplHelper::mid(d->size, &pos, &len)) {
+    case QContainerImplHelper::Null:
+    case QContainerImplHelper::Empty:
+        return QVector<T>();
+    case QContainerImplHelper::Full:
         return *this;
-    if (pos + len > size())
-        len = size() - pos;
-    QVector<T> copy;
-    copy.reserve(len);
-    for (int i = pos; i < pos + len; ++i)
-        copy += at(i);
-    return copy;
+    case QContainerImplHelper::Subset:
+        break;
+    }
+
+    QVector<T> midResult;
+    midResult.reallocData(0, len);
+    T *srcFrom = d->begin() + pos;
+    T *srcTo = d->begin() + pos + len;
+    midResult.copyConstruct(srcFrom, srcTo, midResult.data());
+    midResult.d->size = len;
+    return midResult;
 }
 
 template <typename T>
diff --git a/src/corelib/tools/qvector_msvc.cpp b/src/corelib/tools/qvector_msvc.cpp
index 8570fcf5fe..53a560f19b 100644
--- a/src/corelib/tools/qvector_msvc.cpp
+++ b/src/corelib/tools/qvector_msvc.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/qversionnumber.cpp b/src/corelib/tools/qversionnumber.cpp
new file mode 100644
index 0000000000..4d148249c0
--- /dev/null
+++ b/src/corelib/tools/qversionnumber.cpp
@@ -0,0 +1,484 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Keith Gardner <kreios4004@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QtCore/qversionnumber.h>
+#include <QtCore/qhash.h>
+#include <QtCore/private/qlocale_tools_p.h>
+#include <QtCore/qcollator.h>
+
+#ifndef QT_NO_DATASTREAM
+#  include <QtCore/qdatastream.h>
+#endif
+
+#ifndef QT_NO_DEBUG_STREAM
+#  include <QtCore/qdebug.h>
+#endif
+
+#include <algorithm>
+#include <limits>
+
+QT_BEGIN_NAMESPACE
+
+/*!
+    \class QVersionNumber
+    \inmodule QtCore
+    \since 5.4
+    \brief The QVersionNumber class contains a version number with an arbitrary
+           number of segments.
+
+    \snippet qversionnumber/main.cpp 0
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber()
+
+    Produces a null version.
+
+    \sa isNull()
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber(int maj)
+
+    Constructs a QVersionNumber consisting of just the major version number \a maj.
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber(int maj, int min)
+
+    Constructs a QVersionNumber consisting of the major and minor
+    version numbers \a maj and \a min, respectively.
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber(int maj, int min, int mic)
+
+    Constructs a QVersionNumber consisting of the major, minor, and
+    micro version numbers \a maj, \a min and \a mic, respectively.
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber(const QVector<int> &seg)
+
+    Constructs a version number from the list of numbers contained in \a seg.
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber(QVector<int> &&seg)
+
+    Move-constructs a version number from the list of numbers contained in \a seg.
+
+    This constructor is only enabled if the compiler supports C++11 move semantics.
+*/
+
+/*!
+    \fn QVersionNumber::QVersionNumber(std::initializer_list<int> args)
+
+    Construct a version number from the std::initializer_list specified by
+    \a args.
+
+    This constructor is only enabled if the compiler supports C++11 initializer
+    lists.
+*/
+
+/*!
+    \fn bool QVersionNumber::isNull() const
+
+    Returns \c true if there are zero numerical segments, otherwise returns
+    \c false.
+
+    \sa segments()
+*/
+
+/*!
+  \fn bool QVersionNumber::isNormalized() const
+
+  Returns \c true if the version number does not contain any trailing zeros,
+  otherwise returns \c false.
+
+  \sa normalized()
+*/
+
+/*!
+    \fn int QVersionNumber::majorVersion() const
+
+    Returns the major version number, that is, the first segment.
+    This function is equivalent to segmentAt(0). If this QVersionNumber object
+    is null, this function returns 0.
+
+    \sa isNull(), segmentAt()
+*/
+
+/*!
+    \fn int QVersionNumber::minorVersion() const
+
+    Returns the minor version number, that is, the second segment.
+    This function is equivalent to segmentAt(1). If this QVersionNumber object
+    does not contain a minor number, this function returns 0.
+
+    \sa isNull(), segmentAt()
+*/
+
+/*!
+    \fn int QVersionNumber::microVersion() const
+
+    Returns the micro version number, that is, the third segment.
+    This function is equivalent to segmentAt(2). If this QVersionNumber object
+    does not contain a micro number, this function returns 0.
+
+    \sa isNull(), segmentAt()
+*/
+
+/*!
+    \fn const QVector<int>& QVersionNumber::segments() const
+
+    Returns all of the numerical segments.
+
+    \sa majorVersion(), minorVersion(), microVersion()
+*/
+
+/*!
+    \fn int QVersionNumber::segmentAt(int index) const
+
+    Returns the segement value at \a index.  If the index does not exist,
+    returns 0.
+
+    \sa segments(), segmentCount()
+*/
+
+/*!
+    \fn int QVersionNumber::segmentCount() const
+
+    Returns the number of integers stored in segments().
+
+    \sa segments()
+*/
+
+/*!
+    \fn QVersionNumber QVersionNumber::normalized() const
+
+    Returns an equivalent version number but with all trailing zeros removed.
+
+    To check if two numbers are equivalent, use normalized() on both version
+    numbers before perforing the compare.
+
+    \snippet qversionnumber/main.cpp 4
+ */
+
+/*!
+    \fn bool QVersionNumber::isPrefixOf(const QVersionNumber &other) const
+
+    Returns \c true if the current version number is contained in the \a other
+    version number, otherwise returns \c false.
+
+    \snippet qversionnumber/main.cpp 2
+
+    \sa commonPrefix()
+*/
+bool QVersionNumber::isPrefixOf(const QVersionNumber &other) const Q_DECL_NOTHROW
+{
+    return m_segments.size() <= other.m_segments.size() &&
+            std::equal(m_segments.begin(), m_segments.end(), other.m_segments.begin());
+}
+
+/*!
+    \fn int QVersionNumber::compare(const QVersionNumber &v1,
+                                    const QVersionNumber &v2)
+
+    Compares \a v1 with \a v2 and returns an integer less than, equal to, or
+    greater than zero, depending on whether \a v1 is less than, equal to, or
+    greater than \a v2, respectively.
+
+    Comparisons are performed by comparing the segments of \a v1 and \a v2
+    starting at index 0 and working towards the end of the longer list.
+
+    \snippet qversionnumber/main.cpp 1
+*/
+int QVersionNumber::compare(const QVersionNumber &v1, const QVersionNumber &v2) Q_DECL_NOTHROW
+{
+    QVector<int>::const_iterator i1 = v1.m_segments.constBegin();
+    const QVector<int>::const_iterator e1 = v1.m_segments.constEnd();
+    QVector<int>::const_iterator i2 = v2.m_segments.constBegin();
+    const QVector<int>::const_iterator e2 = v2.m_segments.constEnd();
+
+    while (i1 != e1 && i2 != e2) {
+        if (*i1 != *i2)
+            return (*i1 - *i2);
+        ++i1;
+        ++i2;
+    }
+
+    // ran out of segments in v1 and/or v2 and need to check the first trailing
+    // segment to finish the compare
+    if (i1 != e1) {
+        // v1 is longer
+        if (*i1 != 0)
+            return *i1;
+        else
+            return 1;
+    } else if (i2 != e2) {
+        // v2 is longer
+        if (*i2 != 0)
+            return -*i2;
+        else
+            return -1;
+    }
+
+    // the two version numbers are the same
+    return 0;
+}
+
+/*!
+    QVersionNumber QVersionNumber::commonPrefix(const QVersionNumber &v1,
+                                                    const QVersionNumber &v2)
+
+    Returns a version number that is a parent version of both \a v1 and \a v2.
+
+    \sa isPrefixOf()
+*/
+QVersionNumber QVersionNumber::commonPrefix(const QVersionNumber &v1,
+                                            const QVersionNumber &v2)
+{
+    int min = qMin(v1.m_segments.size(), v2.m_segments.size());
+    QVector<int>::const_iterator i1 = v1.m_segments.begin();
+    QVector<int>::const_iterator e1;
+    e1 = std::mismatch(i1,
+                       v1.m_segments.begin() + min,
+                       v2.m_segments.begin()).first;
+    return QVersionNumber(v1.m_segments.mid(0, e1 - i1));
+}
+
+/*!
+    \fn bool operator<(const QVersionNumber &lhs, const QVersionNumber &rhs)
+    \relates QVersionNumber
+
+    Returns \c true if \a lhs is less than \a rhs; otherwise returns \c false.
+
+    \sa QVersionNumber::compare()
+*/
+
+/*!
+    \fn bool operator<=(const QVersionNumber &lhs, const QVersionNumber &rhs)
+    \relates QVersionNumber
+
+    Returns \c true if \a lhs is less than or equal to \a rhs; otherwise
+    returns \c false.
+
+    \sa QVersionNumber::compare()
+*/
+
+/*!
+    \fn bool operator>(const QVersionNumber &lhs, const QVersionNumber &rhs)
+    \relates QVersionNumber
+
+    Returns \c true if \a lhs is greater than \a rhs; otherwise returns \c
+    false.
+
+    \sa QVersionNumber::compare()
+*/
+
+/*!
+    \fn bool operator>=(const QVersionNumber &lhs, const QVersionNumber &rhs)
+    \relates QVersionNumber
+
+    Returns \c true if \a lhs is greater than or equal to \a rhs; otherwise
+    returns \c false.
+
+    \sa QVersionNumber::compare()
+*/
+
+/*!
+    \fn bool operator==(const QVersionNumber &lhs, const QVersionNumber &rhs)
+    \relates QVersionNumber
+
+    Returns \c true if \a lhs is equal to \a rhs; otherwise returns \c false.
+
+    \sa QVersionNumber::compare()
+*/
+
+/*!
+    \fn bool operator!=(const QVersionNumber &lhs, const QVersionNumber &rhs)
+    \relates QVersionNumber
+
+    Returns \c true if \a lhs is not equal to \a rhs; otherwise returns
+    \c false.
+
+    \sa QVersionNumber::compare()
+*/
+
+/*!
+    \fn QString QVersionNumber::toString() const
+
+    Returns a string with all of the segments delimited by a '.'.
+
+    \sa majorVersion(), minorVersion(), microVersion(), segments()
+*/
+QString QVersionNumber::toString() const
+{
+    QString version;
+    version.reserve(qMax(m_segments.size() * 2 - 1, 0));
+    bool first = true;
+    for (QVector<int>::const_iterator it = m_segments.begin(), end = m_segments.end(); it != end; ++it) {
+        if (!first)
+            version += QLatin1Char('.');
+        version += QString::number(*it);
+        first = false;
+    }
+    return version;
+}
+
+/*!
+    \fn QVersionNumber QVersionNumber::fromString(const QString &string,
+                                                  int *suffixIndex)
+
+    Constructs a QVersionNumber from a specially formatted \a string of
+    non-negative decimal numbers delimited by '.'.
+
+    Once the numerical segments have been parsed, the remainder of the string
+    is considered to be the suffix string.  The start index of that string will be
+    stored in \a suffixIndex if it is not null.
+
+    \snippet qversionnumber/main.cpp 3
+
+    \sa isNull()
+*/
+QVersionNumber QVersionNumber::fromString(const QString &string, int *suffixIndex)
+{
+    QVector<int> seg;
+
+    const QByteArray cString(string.toLatin1());
+
+    const char *start = cString.constData();
+    const char *end = start;
+    const char *lastGoodEnd = start;
+    const char *endOfString = cString.constData() + cString.size();
+
+    do {
+        bool ok = false;
+        const qulonglong value = qstrtoull(start, &end, 10, &ok);
+        if (!ok || value > qulonglong(std::numeric_limits<int>::max()))
+            break;
+        seg.append(int(value));
+        start = end + 1;
+        lastGoodEnd = end;
+    } while (start < endOfString && (end < endOfString && *end == '.'));
+
+    if (suffixIndex)
+        *suffixIndex = int(lastGoodEnd - cString.constData());
+
+    return QVersionNumber(qMove(seg));
+}
+
+/*!
+    \fn QVersionNumber QVersionNumber::normalizedImpl(QVector<int> &segs)
+
+    Implementation of the normalized() function.  Takes the movable list \a segs
+    and normalizes them.
+
+    \internal
+ */
+QVersionNumber QVersionNumber::normalizedImpl(QVector<int> &segs)
+{
+    while (segs.size() && segs.last() == 0)
+        segs.pop_back();
+    return QVersionNumber(qMove(segs));
+}
+
+#ifndef QT_NO_DATASTREAM
+/*!
+   \fn  QDataStream& operator<<(QDataStream &out,
+                                const QVersionNumber &version)
+   \relates QVersionNumber
+
+   Writes the version number \a version to stream \a out.
+
+   Note that this has nothing to do with QDataStream::version().
+ */
+QDataStream& operator<<(QDataStream &out, const QVersionNumber &version)
+{
+    out << version.segments();
+    return out;
+}
+
+/*!
+   \fn QDataStream& operator>>(QDataStream &in, QVersionNumber &version)
+   \relates QVersionNumber
+
+   Reads a version number from stream \a in and stores it in \a version.
+
+   Note that this has nothing to do with QDataStream::version().
+ */
+QDataStream& operator>>(QDataStream &in, QVersionNumber &version)
+{
+    in >> version.m_segments;
+    return in;
+}
+#endif
+
+#ifndef QT_NO_DEBUG_STREAM
+QDebug operator<<(QDebug debug, const QVersionNumber &version)
+{
+    debug.noquote() << version.toString();
+    return debug.quote();
+}
+#endif
+
+/*!
+    \fn uint qHash(const QVersionNumber &key, uint seed)
+    \relates QHash
+    \since 5.4
+
+    Returns the hash value for the \a key, using \a seed to seed the
+    calculation.
+*/
+uint qHash(const QVersionNumber &key, uint seed)
+{
+    uint hash = seed;
+    for (QVector<int>::const_iterator it = key.m_segments.begin(), end = key.m_segments.end(); it != end; ++it) {
+        // used to preserve order
+        //   see N3876 for more information
+        hash ^= qHash(*it) + 0x9e3779b9 + (hash << 6) + (hash >> 2);
+    }
+    return hash;
+}
+
+QT_END_NAMESPACE
diff --git a/src/corelib/tools/qversionnumber.h b/src/corelib/tools/qversionnumber.h
new file mode 100644
index 0000000000..a951b2f1a0
--- /dev/null
+++ b/src/corelib/tools/qversionnumber.h
@@ -0,0 +1,201 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Keith Gardner <kreios4004@gmail.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QVERSIONNUMBER_H
+#define QVERSIONNUMBER_H
+
+#include <QtCore/qnamespace.h>
+#include <QtCore/qstring.h>
+#include <QtCore/qvector.h>
+#include <QtCore/qmetatype.h>
+#include <QtCore/qtypeinfo.h>
+
+QT_BEGIN_NAMESPACE
+
+class QVersionNumber;
+Q_CORE_EXPORT uint qHash(const QVersionNumber &key, uint seed = 0);
+
+#ifndef QT_NO_DATASTREAM
+Q_CORE_EXPORT QDataStream& operator<<(QDataStream &out, const QVersionNumber &version);
+Q_CORE_EXPORT QDataStream& operator>>(QDataStream &in, QVersionNumber &version);
+#endif
+
+class Q_CORE_EXPORT QVersionNumber
+{
+public:
+    inline QVersionNumber() Q_DECL_NOTHROW
+        : m_segments()
+    {}
+    // compiler-generated copy/move ctor/assignment operators are ok
+
+    inline explicit QVersionNumber(const QVector<int> &seg) Q_DECL_NOTHROW
+        : m_segments(seg)
+    {}
+#ifdef Q_COMPILER_RVALUE_REFS
+    inline explicit QVersionNumber(QVector<int> &&seg) Q_DECL_NOTHROW
+        : m_segments(qMove(seg))
+    {}
+#endif
+#ifdef Q_COMPILER_INITIALIZER_LISTS
+    inline QVersionNumber(std::initializer_list<int> args)
+        : m_segments(args)
+    {}
+#endif
+
+    inline explicit QVersionNumber(int maj)
+    { m_segments.reserve(1); m_segments << maj; }
+
+    inline explicit QVersionNumber(int maj, int min)
+    { m_segments.reserve(2); m_segments << maj << min; }
+
+    inline explicit QVersionNumber(int maj, int min, int mic)
+    { m_segments.reserve(3); m_segments << maj << min << mic; }
+
+    inline bool isNull() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return m_segments.isEmpty(); }
+
+    inline bool isNormalized() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return isNull() || m_segments.last() != 0; }
+
+    inline int majorVersion() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return segmentAt(0); }
+
+    inline int minorVersion() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return segmentAt(1); }
+
+    inline int microVersion() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return segmentAt(2); }
+
+#if defined(Q_COMPILER_REF_QUALIFIERS)
+#  if defined(Q_CC_GNU)
+    // required due to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61941
+#    pragma push_macro("Q_REQUIRED_RESULT")
+#    undef Q_REQUIRED_RESULT
+#    define Q_REQUIRED_RESULT
+#    define Q_REQUIRED_RESULT_pushed
+#  endif
+    inline QVersionNumber normalized() const & Q_REQUIRED_RESULT
+    {
+        QVector<int> segs(m_segments);
+        return normalizedImpl(segs);
+    }
+
+    inline QVersionNumber normalized() && Q_REQUIRED_RESULT
+    {
+        return normalizedImpl(m_segments);
+    }
+
+    inline QVector<int> segments() const & Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return m_segments; }
+
+    inline QVector<int> segments() && Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return qMove(m_segments); }
+
+#  ifdef Q_REQUIRED_RESULT_pushed
+#    pragma pop_macro("Q_REQUIRED_RESULT")
+#  endif
+#else
+    inline QVersionNumber normalized() const Q_REQUIRED_RESULT
+    {
+        QVector<int> segs(m_segments);
+        return normalizedImpl(segs);
+    }
+
+    inline QVector<int> segments() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return m_segments; }
+#endif
+
+    inline int segmentAt(int index) const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return (m_segments.size() > index) ? m_segments.at(index) : 0; }
+
+    inline int segmentCount() const Q_DECL_NOTHROW Q_REQUIRED_RESULT
+    { return m_segments.size(); }
+
+    bool isPrefixOf(const QVersionNumber &other) const Q_DECL_NOTHROW Q_REQUIRED_RESULT;
+
+    static int compare(const QVersionNumber &v1, const QVersionNumber &v2) Q_DECL_NOTHROW Q_REQUIRED_RESULT;
+
+    static Q_DECL_PURE_FUNCTION QVersionNumber commonPrefix(const QVersionNumber &v1, const QVersionNumber &v2) Q_REQUIRED_RESULT;
+
+    QString toString() const Q_REQUIRED_RESULT;
+    static Q_DECL_PURE_FUNCTION QVersionNumber fromString(const QString &string, int *suffixIndex = 0) Q_REQUIRED_RESULT;
+
+private:
+    static QVersionNumber normalizedImpl(QVector<int> &segs) Q_REQUIRED_RESULT;
+
+#ifndef QT_NO_DATASTREAM
+    friend Q_CORE_EXPORT QDataStream& operator>>(QDataStream &in, QVersionNumber &version);
+#endif
+    friend Q_CORE_EXPORT uint qHash(const QVersionNumber &key, uint seed);
+
+    QVector<int> m_segments;
+};
+
+Q_DECLARE_TYPEINFO(QVersionNumber, Q_MOVABLE_TYPE);
+
+#ifndef QT_NO_DEBUG_STREAM
+Q_CORE_EXPORT QDebug operator<<(QDebug, const QVersionNumber &version);
+#endif
+
+Q_REQUIRED_RESULT inline bool operator> (const QVersionNumber &lhs, const QVersionNumber &rhs) Q_DECL_NOTHROW
+{ return QVersionNumber::compare(lhs, rhs) > 0; }
+
+Q_REQUIRED_RESULT inline bool operator>=(const QVersionNumber &lhs, const QVersionNumber &rhs) Q_DECL_NOTHROW
+{ return QVersionNumber::compare(lhs, rhs) >= 0; }
+
+Q_REQUIRED_RESULT inline bool operator< (const QVersionNumber &lhs, const QVersionNumber &rhs) Q_DECL_NOTHROW
+{ return QVersionNumber::compare(lhs, rhs) < 0; }
+
+Q_REQUIRED_RESULT inline bool operator<=(const QVersionNumber &lhs, const QVersionNumber &rhs) Q_DECL_NOTHROW
+{ return QVersionNumber::compare(lhs, rhs) <= 0; }
+
+Q_REQUIRED_RESULT inline bool operator==(const QVersionNumber &lhs, const QVersionNumber &rhs) Q_DECL_NOTHROW
+{ return QVersionNumber::compare(lhs, rhs) == 0; }
+
+Q_REQUIRED_RESULT inline bool operator!=(const QVersionNumber &lhs, const QVersionNumber &rhs) Q_DECL_NOTHROW
+{ return QVersionNumber::compare(lhs, rhs) != 0; }
+
+QT_END_NAMESPACE
+
+Q_DECLARE_METATYPE(QVersionNumber)
+
+#endif //QVERSIONNUMBER_H
diff --git a/src/corelib/tools/qvsnprintf.cpp b/src/corelib/tools/qvsnprintf.cpp
index 2f7f89faff..cf595b8f31 100644
--- a/src/corelib/tools/qvsnprintf.cpp
+++ b/src/corelib/tools/qvsnprintf.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/tools/tools.pri b/src/corelib/tools/tools.pri
index 57a9591060..af0ed228bd 100644
--- a/src/corelib/tools/tools.pri
+++ b/src/corelib/tools/tools.pri
@@ -9,6 +9,7 @@ HEADERS +=  \
         tools/qarraydatapointer.h \
         tools/qbitarray.h \
         tools/qbytearray.h \
+        tools/qbytearraylist.h \
         tools/qbytearraymatcher.h \
         tools/qbytedata_p.h \
         tools/qcache.h \
@@ -43,7 +44,6 @@ HEADERS +=  \
         tools/qqueue.h \
         tools/qrect.h \
         tools/qregexp.h \
-        tools/qregularexpression.h \
         tools/qringbuffer_p.h \
         tools/qrefcount.h \
         tools/qscopedpointer.h \
@@ -70,13 +70,15 @@ HEADERS +=  \
         tools/qunicodetables_p.h \
         tools/qunicodetools_p.h \
         tools/qvarlengtharray.h \
-        tools/qvector.h
+        tools/qvector.h \
+        tools/qversionnumber.h
 
 
 SOURCES += \
         tools/qarraydata.cpp \
         tools/qbitarray.cpp \
         tools/qbytearray.cpp \
+        tools/qbytearraylist.cpp \
         tools/qbytearraymatcher.cpp \
         tools/qcollator.cpp \
         tools/qcommandlineoption.cpp \
@@ -100,7 +102,6 @@ SOURCES += \
         tools/qcontiguouscache.cpp \
         tools/qrect.cpp \
         tools/qregexp.cpp \
-        tools/qregularexpression.cpp \
         tools/qrefcount.cpp \
         tools/qshareddata.cpp \
         tools/qsharedpointer.cpp \
@@ -115,7 +116,8 @@ SOURCES += \
         tools/qtimezoneprivate.cpp \
         tools/qunicodetools.cpp \
         tools/qvector.cpp \
-        tools/qvsnprintf.cpp
+        tools/qvsnprintf.cpp \
+        tools/qversionnumber.cpp
 
 NO_PCH_SOURCES = tools/qstring_compat.cpp
 msvc: NO_PCH_SOURCES += tools/qvector_msvc.cpp
@@ -176,10 +178,15 @@ contains(QT_CONFIG,icu) {
     SOURCES += tools/qcollator_posix.cpp
 }
 
-pcre {
-    include($$PWD/../../3rdparty/pcre.pri)
-} else {
-    LIBS_PRIVATE += -lpcre16
+!contains(QT_DISABLED_FEATURES, regularexpression) {
+    HEADERS += tools/qregularexpression.h
+    SOURCES += tools/qregularexpression.cpp
+
+    pcre {
+        include($$PWD/../../3rdparty/pcre.pri)
+    } else {
+        LIBS_PRIVATE += -lpcre16
+    }
 }
 
 INCLUDEPATH += ../3rdparty/harfbuzz/src
@@ -207,3 +214,4 @@ TR_EXCLUDE += ../3rdparty/*
 # MIPS DSP
 MIPS_DSP_ASM += tools/qstring_mips_dsp_asm.S
 MIPS_DSP_HEADERS += ../gui/painting/qt_mips_asm_dsp_p.h
+CONFIG += simd
diff --git a/src/corelib/xml/qxmlstream.cpp b/src/corelib/xml/qxmlstream.cpp
index 83d0c73ae1..94f6a8bcde 100644
--- a/src/corelib/xml/qxmlstream.cpp
+++ b/src/corelib/xml/qxmlstream.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -333,7 +325,7 @@ QXmlStreamEntityResolver *QXmlStreamReader::entityResolver() const
   namespace prefixes, you can turn off namespace processing completely
   with the \l namespaceProcessing property.
 
-  \section1 Incremental parsing
+  \section1 Incremental Parsing
 
   QXmlStreamReader is an incremental parser. It can handle the case
   where the document can't be parsed all at once because it arrives in
@@ -357,7 +349,7 @@ QXmlStreamEntityResolver *QXmlStreamReader::entityResolver() const
   stream reader using addData(). Then you call your custom parsing
   function that reads the XML events from the reader.
 
-  \section1 Performance and memory consumption
+  \section1 Performance and Memory Consumption
 
   QXmlStreamReader is memory-conservative by design, since it doesn't
   store the entire XML document tree in memory, but only the current
@@ -1631,7 +1623,7 @@ void QXmlStreamReaderPrivate::resolveTag()
             if (attributes[j].name() == attribute.name()
                 && attributes[j].namespaceUri() == attribute.namespaceUri()
                 && (namespaceProcessing || attributes[j].qualifiedName() == attribute.qualifiedName()))
-                raiseWellFormedError(QXmlStream::tr("Attribute redefined."));
+                raiseWellFormedError(QXmlStream::tr("Attribute '%1' redefined.").arg(attribute.qualifiedName().toString()));
         }
     }
 
@@ -1711,9 +1703,9 @@ uint QXmlStreamReaderPrivate::resolveCharRef(int symbolIndex)
     uint s;
     // ### add toXShort to QStringRef?
     if (sym(symbolIndex).c == 'x')
-        s = symString(symbolIndex, 1).toString().toUInt(&ok, 16);
+        s = symString(symbolIndex, 1).toUInt(&ok, 16);
     else
-        s = symString(symbolIndex).toString().toUInt(&ok, 10);
+        s = symString(symbolIndex).toUInt(&ok, 10);
 
     ok &= (s == 0x9 || s == 0xa || s == 0xd || (s >= 0x20 && s <= 0xd7ff)
            || (s >= 0xe000 && s <= 0xfffd) || (s >= 0x10000 && s <= QChar::LastValidCodePoint));
@@ -1773,7 +1765,7 @@ void QXmlStreamReaderPrivate::startDocument()
 {
     QString err;
     if (documentVersion != QLatin1String("1.0")) {
-        if (documentVersion.toString().contains(QLatin1Char(' ')))
+        if (documentVersion.contains(QLatin1Char(' ')))
             err = QXmlStream::tr("Invalid XML version string.");
         else
             err = QXmlStream::tr("Unsupported XML version.");
diff --git a/src/corelib/xml/qxmlstream.h b/src/corelib/xml/qxmlstream.h
index 8a9c2fcb76..77f99c5d16 100644
--- a/src/corelib/xml/qxmlstream.h
+++ b/src/corelib/xml/qxmlstream.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/xml/qxmlstream_p.h b/src/corelib/xml/qxmlstream_p.h
index 448764ab58..7ff65e1718 100644
--- a/src/corelib/xml/qxmlstream_p.h
+++ b/src/corelib/xml/qxmlstream_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/xml/qxmlutils.cpp b/src/corelib/xml/qxmlutils.cpp
index d175d554cc..e2be794676 100644
--- a/src/corelib/xml/qxmlutils.cpp
+++ b/src/corelib/xml/qxmlutils.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/corelib/xml/qxmlutils_p.h b/src/corelib/xml/qxmlutils_p.h
index 34fe3a305b..fddfe885af 100644
--- a/src/corelib/xml/qxmlutils_p.h
+++ b/src/corelib/xml/qxmlutils_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/doc/src/dbus-adaptors.qdoc b/src/dbus/doc/src/dbus-adaptors.qdoc
index 46a6b79c0b..e2085ee26e 100644
--- a/src/dbus/doc/src/dbus-adaptors.qdoc
+++ b/src/dbus/doc/src/dbus-adaptors.qdoc
@@ -97,7 +97,7 @@
     Break-down analysis:
     \tableofcontents
 
-    \section1 The header
+    \section1 The Header
 
     The header of the example is:
     \snippet code/doc_src_qdbusadaptors.cpp 3
@@ -109,7 +109,7 @@
       \li it declares the name of the D-Bus interface it implements.
     \endlist
 
-    \section1 The properties
+    \section1 The Properties
 
     The properties are declared as follows:
     \snippet code/doc_src_qdbusadaptors.cpp 4
@@ -126,7 +126,7 @@
     caption property is empty. Note how it is possible to access data defined in other objects
     through the getter/setter functions.
 
-    \section1 The constructor
+    \section1 The Constructor
 
     The constructor:
     \snippet code/doc_src_qdbusadaptors.cpp 6
diff --git a/src/dbus/qdbus_symbols.cpp b/src/dbus/qdbus_symbols.cpp
index a7a1b67397..8c642c8887 100644
--- a/src/dbus/qdbus_symbols.cpp
+++ b/src/dbus/qdbus_symbols.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbus_symbols_p.h b/src/dbus/qdbus_symbols_p.h
index 96f28ac821..71658f84c6 100644
--- a/src/dbus/qdbus_symbols_p.h
+++ b/src/dbus/qdbus_symbols_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusabstractadaptor.cpp b/src/dbus/qdbusabstractadaptor.cpp
index 7fba3bf53a..d89527ed92 100644
--- a/src/dbus/qdbusabstractadaptor.cpp
+++ b/src/dbus/qdbusabstractadaptor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusabstractadaptor.h b/src/dbus/qdbusabstractadaptor.h
index 2a32344de5..7344335403 100644
--- a/src/dbus/qdbusabstractadaptor.h
+++ b/src/dbus/qdbusabstractadaptor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusabstractadaptor_p.h b/src/dbus/qdbusabstractadaptor_p.h
index 284b0fb706..b75e3f19cf 100644
--- a/src/dbus/qdbusabstractadaptor_p.h
+++ b/src/dbus/qdbusabstractadaptor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusabstractinterface.cpp b/src/dbus/qdbusabstractinterface.cpp
index bbcd52294f..903d7680bd 100644
--- a/src/dbus/qdbusabstractinterface.cpp
+++ b/src/dbus/qdbusabstractinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusabstractinterface.h b/src/dbus/qdbusabstractinterface.h
index 8f014ce151..e01cfad36b 100644
--- a/src/dbus/qdbusabstractinterface.h
+++ b/src/dbus/qdbusabstractinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusabstractinterface_p.h b/src/dbus/qdbusabstractinterface_p.h
index e696781cdc..3873e965fe 100644
--- a/src/dbus/qdbusabstractinterface_p.h
+++ b/src/dbus/qdbusabstractinterface_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusargument.cpp b/src/dbus/qdbusargument.cpp
index 6157694d12..2f209ccf10 100644
--- a/src/dbus/qdbusargument.cpp
+++ b/src/dbus/qdbusargument.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusargument.h b/src/dbus/qdbusargument.h
index a3a6f990fc..83300c7df6 100644
--- a/src/dbus/qdbusargument.h
+++ b/src/dbus/qdbusargument.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusargument_p.h b/src/dbus/qdbusargument_p.h
index 54cd90dde1..12039307e1 100644
--- a/src/dbus/qdbusargument_p.h
+++ b/src/dbus/qdbusargument_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusconnection.cpp b/src/dbus/qdbusconnection.cpp
index f3676b1013..1a56f53a63 100644
--- a/src/dbus/qdbusconnection.cpp
+++ b/src/dbus/qdbusconnection.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusconnection.h b/src/dbus/qdbusconnection.h
index 20a579f8d6..66fb514865 100644
--- a/src/dbus/qdbusconnection.h
+++ b/src/dbus/qdbusconnection.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusconnection_p.h b/src/dbus/qdbusconnection_p.h
index fd4ced078d..b1ec11dc71 100644
--- a/src/dbus/qdbusconnection_p.h
+++ b/src/dbus/qdbusconnection_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusconnectioninterface.cpp b/src/dbus/qdbusconnectioninterface.cpp
index 0bc3a1ad04..7fe6f2bb88 100644
--- a/src/dbus/qdbusconnectioninterface.cpp
+++ b/src/dbus/qdbusconnectioninterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusconnectioninterface.h b/src/dbus/qdbusconnectioninterface.h
index b900d2a64c..ed267ecc79 100644
--- a/src/dbus/qdbusconnectioninterface.h
+++ b/src/dbus/qdbusconnectioninterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusconnectionmanager_p.h b/src/dbus/qdbusconnectionmanager_p.h
index 5d43c9cc86..d2c8282f6c 100644
--- a/src/dbus/qdbusconnectionmanager_p.h
+++ b/src/dbus/qdbusconnectionmanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuscontext.cpp b/src/dbus/qdbuscontext.cpp
index 9cc56570e7..fae31fcb6e 100644
--- a/src/dbus/qdbuscontext.cpp
+++ b/src/dbus/qdbuscontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuscontext.h b/src/dbus/qdbuscontext.h
index 82dc7783bf..e3e5f1ba4c 100644
--- a/src/dbus/qdbuscontext.h
+++ b/src/dbus/qdbuscontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuscontext_p.h b/src/dbus/qdbuscontext_p.h
index 80789d6277..8465f3d069 100644
--- a/src/dbus/qdbuscontext_p.h
+++ b/src/dbus/qdbuscontext_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusdemarshaller.cpp b/src/dbus/qdbusdemarshaller.cpp
index 0728192748..b5a0a4d626 100644
--- a/src/dbus/qdbusdemarshaller.cpp
+++ b/src/dbus/qdbusdemarshaller.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuserror.cpp b/src/dbus/qdbuserror.cpp
index 14f9491b43..c180508c1c 100644
--- a/src/dbus/qdbuserror.cpp
+++ b/src/dbus/qdbuserror.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuserror.h b/src/dbus/qdbuserror.h
index 2c4ec6ce71..8ebec23809 100644
--- a/src/dbus/qdbuserror.h
+++ b/src/dbus/qdbuserror.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusextratypes.cpp b/src/dbus/qdbusextratypes.cpp
index 87dd4f7dd9..32648be92a 100644
--- a/src/dbus/qdbusextratypes.cpp
+++ b/src/dbus/qdbusextratypes.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusextratypes.h b/src/dbus/qdbusextratypes.h
index ba99d45c0d..c302850fa5 100644
--- a/src/dbus/qdbusextratypes.h
+++ b/src/dbus/qdbusextratypes.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusintegrator.cpp b/src/dbus/qdbusintegrator.cpp
index 499e9dbd82..0dc8477ff4 100644
--- a/src/dbus/qdbusintegrator.cpp
+++ b/src/dbus/qdbusintegrator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #include "qdbusintegrator_p.h"
 
 #include <qcoreapplication.h>
+#include <qelapsedtimer.h>
 #include <qdebug.h>
 #include <qmetaobject.h>
 #include <qobject.h>
@@ -76,15 +69,21 @@ QT_BEGIN_NAMESPACE
 static QBasicAtomicInt isDebugging = Q_BASIC_ATOMIC_INITIALIZER(-1);
 #define qDBusDebug              if (::isDebugging == 0); else qDebug
 
-Q_GLOBAL_STATIC_WITH_ARGS(const QString, orgFreedesktopDBusString, (QLatin1String(DBUS_SERVICE_DBUS)))
+static inline QString orgFreedesktopDBusString()
+{
+    return QStringLiteral(DBUS_SERVICE_DBUS);
+}
 
 static inline QString dbusServiceString()
-{ return *orgFreedesktopDBusString(); }
+{
+    return orgFreedesktopDBusString();
+}
+
 static inline QString dbusInterfaceString()
 {
     // it's the same string, but just be sure
-    Q_ASSERT(*orgFreedesktopDBusString() == QLatin1String(DBUS_INTERFACE_DBUS));
-    return *orgFreedesktopDBusString();
+    Q_ASSERT(orgFreedesktopDBusString() == QLatin1String(DBUS_INTERFACE_DBUS));
+    return orgFreedesktopDBusString();
 }
 
 static inline QDebug operator<<(QDebug dbg, const QThread *th)
@@ -1932,9 +1931,95 @@ int QDBusConnectionPrivate::send(const QDBusMessage& message)
     return serial;
 }
 
+// small helper to note long running blocking dbus calls.
+// these are generally a sign of fragile software (too long a call can either
+// lead to bad user experience, if it's running on the GUI thread for instance)
+// or break completely under load (hitting the call timeout).
+//
+// as a result, this is something we want to watch for.
+class QDBusBlockingCallWatcher
+{
+public:
+    QDBusBlockingCallWatcher(const QDBusMessage &message)
+        : m_message(message), m_maxCallTimeoutMs(0)
+    {
+#if defined(QT_NO_DEBUG)
+        // when in a release build, we default these to off.
+        // this means that we only affect code that explicitly enables the warning.
+        static int mainThreadWarningAmount = -1;
+        static int otherThreadWarningAmount = -1;
+#else
+        static int mainThreadWarningAmount = 200;
+        static int otherThreadWarningAmount = 500;
+#endif
+        static bool initializedAmounts = false;
+        static QBasicMutex initializeMutex;
+        QMutexLocker locker(&initializeMutex);
+
+        if (!initializedAmounts) {
+            int tmp = 0;
+            QByteArray env;
+            bool ok = true;
+
+            env = qgetenv("Q_DBUS_BLOCKING_CALL_MAIN_THREAD_WARNING_MS");
+            if (!env.isEmpty()) {
+                tmp = env.toInt(&ok);
+                if (ok)
+                    mainThreadWarningAmount = tmp;
+                else
+                    qWarning("QDBusBlockingCallWatcher: Q_DBUS_BLOCKING_CALL_MAIN_THREAD_WARNING_MS must be an integer; value ignored");
+            }
+
+            env = qgetenv("Q_DBUS_BLOCKING_CALL_OTHER_THREAD_WARNING_MS");
+            if (!env.isEmpty()) {
+                tmp = env.toInt(&ok);
+                if (ok)
+                    otherThreadWarningAmount = tmp;
+                else
+                    qWarning("QDBusBlockingCallWatcher: Q_DBUS_BLOCKING_CALL_OTHER_THREAD_WARNING_MS must be an integer; value ignored");
+            }
+
+            initializedAmounts = true;
+        }
+
+        locker.unlock();
+
+        // if this call is running on the main thread, we have a much lower
+        // tolerance for delay because any long-term delay will wreck user
+        // interactivity.
+        if (qApp && qApp->thread() == QThread::currentThread())
+            m_maxCallTimeoutMs = mainThreadWarningAmount;
+        else
+            m_maxCallTimeoutMs = otherThreadWarningAmount;
+
+        m_callTimer.start();
+    }
+
+    ~QDBusBlockingCallWatcher()
+    {
+        if (m_maxCallTimeoutMs < 0)
+            return; // disabled
+
+        if (m_callTimer.elapsed() >= m_maxCallTimeoutMs) {
+            qWarning("QDBusConnection: warning: blocking call took a long time (%d ms, max for this thread is %d ms) to service \"%s\" path \"%s\" interface \"%s\" member \"%s\"",
+                     int(m_callTimer.elapsed()), m_maxCallTimeoutMs,
+                     qPrintable(m_message.service()), qPrintable(m_message.path()),
+                     qPrintable(m_message.interface()), qPrintable(m_message.member()));
+        }
+    }
+
+private:
+    QDBusMessage m_message;
+    int m_maxCallTimeoutMs;
+    QElapsedTimer m_callTimer;
+};
+
+
 QDBusMessage QDBusConnectionPrivate::sendWithReply(const QDBusMessage &message,
                                                    int sendMode, int timeout)
 {
+    QDBusBlockingCallWatcher watcher(message);
+
     checkThread();
     if ((sendMode == QDBus::BlockWithGui || sendMode == QDBus::Block)
          && isServiceRegisteredByThread(message.service()))
@@ -2266,7 +2351,7 @@ QDBusConnectionPrivate::disconnectSignal(SignalHookHash::Iterator &it)
                     watchedServices.erase(sit);
                     disconnectSignal(dbusServiceString(), QString(), dbusInterfaceString(),
                                   QLatin1String("NameOwnerChanged"), QStringList() << hook.service, QString(),
-                                  this, SLOT(_q_serviceOwnerChanged(QString,QString,QString)));
+                                  this, SLOT(serviceOwnerChangedNoLock(QString,QString,QString)));
                 }
             }
         }
diff --git a/src/dbus/qdbusintegrator_p.h b/src/dbus/qdbusintegrator_p.h
index b44db0098f..38aad9fa86 100644
--- a/src/dbus/qdbusintegrator_p.h
+++ b/src/dbus/qdbusintegrator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusinterface.cpp b/src/dbus/qdbusinterface.cpp
index d4a027f2db..fe1b50dec1 100644
--- a/src/dbus/qdbusinterface.cpp
+++ b/src/dbus/qdbusinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusinterface.h b/src/dbus/qdbusinterface.h
index d2bb1da369..04adaced88 100644
--- a/src/dbus/qdbusinterface.h
+++ b/src/dbus/qdbusinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusinterface_p.h b/src/dbus/qdbusinterface_p.h
index 456e0f8f6c..76cf292178 100644
--- a/src/dbus/qdbusinterface_p.h
+++ b/src/dbus/qdbusinterface_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusinternalfilters.cpp b/src/dbus/qdbusinternalfilters.cpp
index 17e12f1bba..aecb75258f 100644
--- a/src/dbus/qdbusinternalfilters.cpp
+++ b/src/dbus/qdbusinternalfilters.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusintrospection.cpp b/src/dbus/qdbusintrospection.cpp
index a23f03d5cf..713f9768b0 100644
--- a/src/dbus/qdbusintrospection.cpp
+++ b/src/dbus/qdbusintrospection.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusintrospection_p.h b/src/dbus/qdbusintrospection_p.h
index b892ed95f1..92c870f2df 100644
--- a/src/dbus/qdbusintrospection_p.h
+++ b/src/dbus/qdbusintrospection_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmacros.h b/src/dbus/qdbusmacros.h
index 5a95f53261..5bdc63b386 100644
--- a/src/dbus/qdbusmacros.h
+++ b/src/dbus/qdbusmacros.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmarshaller.cpp b/src/dbus/qdbusmarshaller.cpp
index 207e1ba247..0e21e2f282 100644
--- a/src/dbus/qdbusmarshaller.cpp
+++ b/src/dbus/qdbusmarshaller.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmessage.cpp b/src/dbus/qdbusmessage.cpp
index ea18de141d..8025636668 100644
--- a/src/dbus/qdbusmessage.cpp
+++ b/src/dbus/qdbusmessage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmessage.h b/src/dbus/qdbusmessage.h
index 8f8954c1ce..23b7deb94b 100644
--- a/src/dbus/qdbusmessage.h
+++ b/src/dbus/qdbusmessage.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmessage_p.h b/src/dbus/qdbusmessage_p.h
index bf2bf9f400..08f6d4bbfa 100644
--- a/src/dbus/qdbusmessage_p.h
+++ b/src/dbus/qdbusmessage_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmetaobject.cpp b/src/dbus/qdbusmetaobject.cpp
index 8337a84614..9f07817df0 100644
--- a/src/dbus/qdbusmetaobject.cpp
+++ b/src/dbus/qdbusmetaobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmetaobject_p.h b/src/dbus/qdbusmetaobject_p.h
index 8f7d0d406c..22c7b6d3e5 100644
--- a/src/dbus/qdbusmetaobject_p.h
+++ b/src/dbus/qdbusmetaobject_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmetatype.cpp b/src/dbus/qdbusmetatype.cpp
index b72d4c074d..d02f2ebb26 100644
--- a/src/dbus/qdbusmetatype.cpp
+++ b/src/dbus/qdbusmetatype.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmetatype.h b/src/dbus/qdbusmetatype.h
index bc556a0157..ccf433448b 100644
--- a/src/dbus/qdbusmetatype.h
+++ b/src/dbus/qdbusmetatype.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmetatype_p.h b/src/dbus/qdbusmetatype_p.h
index c5a3a5cbc2..0594cea3b8 100644
--- a/src/dbus/qdbusmetatype_p.h
+++ b/src/dbus/qdbusmetatype_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusmisc.cpp b/src/dbus/qdbusmisc.cpp
index 5d3512845a..3e69504814 100644
--- a/src/dbus/qdbusmisc.cpp
+++ b/src/dbus/qdbusmisc.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuspendingcall.cpp b/src/dbus/qdbuspendingcall.cpp
index de758b515b..a0d8e449e2 100644
--- a/src/dbus/qdbuspendingcall.cpp
+++ b/src/dbus/qdbuspendingcall.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuspendingcall.h b/src/dbus/qdbuspendingcall.h
index 19bc34c26b..b188ba6db1 100644
--- a/src/dbus/qdbuspendingcall.h
+++ b/src/dbus/qdbuspendingcall.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuspendingcall_p.h b/src/dbus/qdbuspendingcall_p.h
index d0b28b3c0e..486338848a 100644
--- a/src/dbus/qdbuspendingcall_p.h
+++ b/src/dbus/qdbuspendingcall_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuspendingreply.cpp b/src/dbus/qdbuspendingreply.cpp
index c0e24bee06..c1af3e6acc 100644
--- a/src/dbus/qdbuspendingreply.cpp
+++ b/src/dbus/qdbuspendingreply.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbuspendingreply.h b/src/dbus/qdbuspendingreply.h
index b7e459f7a7..2f7932af2f 100644
--- a/src/dbus/qdbuspendingreply.h
+++ b/src/dbus/qdbuspendingreply.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusreply.cpp b/src/dbus/qdbusreply.cpp
index 551891fdf2..c141c233a1 100644
--- a/src/dbus/qdbusreply.cpp
+++ b/src/dbus/qdbusreply.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusreply.h b/src/dbus/qdbusreply.h
index 4567c80131..0a9f9a5b5a 100644
--- a/src/dbus/qdbusreply.h
+++ b/src/dbus/qdbusreply.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusserver.cpp b/src/dbus/qdbusserver.cpp
index a9dd72036c..f2f4872aa0 100644
--- a/src/dbus/qdbusserver.cpp
+++ b/src/dbus/qdbusserver.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusserver.h b/src/dbus/qdbusserver.h
index 7a7f54b6c1..d31e7e4720 100644
--- a/src/dbus/qdbusserver.h
+++ b/src/dbus/qdbusserver.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusservicewatcher.cpp b/src/dbus/qdbusservicewatcher.cpp
index 7a96665abe..f09d802380 100644
--- a/src/dbus/qdbusservicewatcher.cpp
+++ b/src/dbus/qdbusservicewatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusservicewatcher.h b/src/dbus/qdbusservicewatcher.h
index 0988d82550..3d5f0592a3 100644
--- a/src/dbus/qdbusservicewatcher.h
+++ b/src/dbus/qdbusservicewatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusthreaddebug_p.h b/src/dbus/qdbusthreaddebug_p.h
index f9039ef3cd..78db18f5c7 100644
--- a/src/dbus/qdbusthreaddebug_p.h
+++ b/src/dbus/qdbusthreaddebug_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusunixfiledescriptor.cpp b/src/dbus/qdbusunixfiledescriptor.cpp
index 63c5b40d06..0582d50955 100644
--- a/src/dbus/qdbusunixfiledescriptor.cpp
+++ b/src/dbus/qdbusunixfiledescriptor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusunixfiledescriptor.h b/src/dbus/qdbusunixfiledescriptor.h
index e8746fef41..d0bce5badf 100644
--- a/src/dbus/qdbusunixfiledescriptor.h
+++ b/src/dbus/qdbusunixfiledescriptor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusutil.cpp b/src/dbus/qdbusutil.cpp
index c77908ef89..441c00f119 100644
--- a/src/dbus/qdbusutil.cpp
+++ b/src/dbus/qdbusutil.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusutil_p.h b/src/dbus/qdbusutil_p.h
index 5d8b3a1293..0d3204328f 100644
--- a/src/dbus/qdbusutil_p.h
+++ b/src/dbus/qdbusutil_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusvirtualobject.cpp b/src/dbus/qdbusvirtualobject.cpp
index fb9599f193..ffbe71dc3f 100644
--- a/src/dbus/qdbusvirtualobject.cpp
+++ b/src/dbus/qdbusvirtualobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusvirtualobject.h b/src/dbus/qdbusvirtualobject.h
index da63082c70..7981d67960 100644
--- a/src/dbus/qdbusvirtualobject.h
+++ b/src/dbus/qdbusvirtualobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusxmlgenerator.cpp b/src/dbus/qdbusxmlgenerator.cpp
index 240c374cc5..b4c952f779 100644
--- a/src/dbus/qdbusxmlgenerator.cpp
+++ b/src/dbus/qdbusxmlgenerator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusxmlparser.cpp b/src/dbus/qdbusxmlparser.cpp
index 82d95a5c1b..e7d4f365bc 100644
--- a/src/dbus/qdbusxmlparser.cpp
+++ b/src/dbus/qdbusxmlparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/dbus/qdbusxmlparser_p.h b/src/dbus/qdbusxmlparser_p.h
index 1854bcf7ce..c99d23584c 100644
--- a/src/dbus/qdbusxmlparser_p.h
+++ b/src/dbus/qdbusxmlparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDBus module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qaccessible.cpp b/src/gui/accessible/qaccessible.cpp
index 954c8564f0..f85b6d1aad 100644
--- a/src/gui/accessible/qaccessible.cpp
+++ b/src/gui/accessible/qaccessible.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -97,6 +89,15 @@ QT_BEGIN_NAMESPACE
     Accessibility, and the Unix/X11 AT-SPI standard. Other backends
     can be supported using QAccessibleBridge.
 
+    In the Unix/X11 AT-SPI implementation, applications become accessible
+    when two conditions are met:
+    \list
+    \li org.a11y.Status.IsEnabled DBus property is true
+    \li org.a11y.Status.ScreenReaderEnabled DBus property is true
+    \endlist
+    An alternative to setting the DBus AT-SPI properties is to set
+    the QT_LINUX_ACCESSIBILITY_ALWAYS_ON environment variable.
+
     In addition to QAccessible's static functions, Qt offers one
     generic interface, QAccessibleInterface, that can be used to wrap
     all widgets and objects (e.g., QPushButton). This single
@@ -167,7 +168,7 @@ QT_BEGIN_NAMESPACE
     \value readOnly                The object can usually be edited, but is explicitly set to read-only.
     \value selectable              The object is selectable.
     \value selectableText          The object has text which can be selected. This is different from selectable which refers to the object's children.
-    \value selected                The object is selected.
+    \value selected                The object is selected, this is independent of text selection.
     \value selfVoicing             The object describes itself through speech or sound.
     \value sizeable                The object can be resized, e.g. top-level windows.
     \value summaryElement          The object summarizes the state of the window and should be treated with priority.
@@ -310,19 +311,24 @@ QT_BEGIN_NAMESPACE
     \value CheckBox         An object that represents an option that can be checked or unchecked. Some options provide a "mixed" state, e.g. neither checked nor unchecked.
     \value Client           The client area in a window.
     \value Clock            A clock displaying time.
+    \value ColorChooser     A dialog that lets the user choose a color.
     \value Column           A column of cells, usually within a table.
     \value ColumnHeader     A header for a column of data.
     \value ComboBox         A list of choices that the user can select from.
+    \value ComplementaryContent A part of the document or web page that is complementary to the main content, usually a landmark (see WAI-ARIA).
     \value Cursor           An object that represents the mouse cursor.
     \value Desktop          The object represents the desktop or workspace.
     \value Dial             An object that represents a dial or knob.
     \value Dialog           A dialog box.
-    \value Document         A document window, usually in an MDI environment.
-    \value EditableText     Editable text
+    \value Document         A document, for example in an office application.
+    \value EditableText     Editable text such as a line or text edit.
     \value Equation         An object that represents a mathematical equation.
+    \value Footer           A footer in a page (usually in documents).
+    \value Form             A web form containing controls.
     \value Graphic          A graphic or picture, e.g. an icon.
     \value Grip             A grip that the user can drag to change the size of widgets.
     \value Grouping         An object that represents a logical grouping of other objects.
+    \value Heading          A heading in a document.
     \value HelpBalloon      An object that displays help in a separate, short lived window.
     \value HotkeyField      A hotkey field that allows the user to enter a key sequence.
     \value Indicator        An indicator that represents a current value or item.
@@ -333,8 +339,10 @@ QT_BEGIN_NAMESPACE
     \value MenuBar          A menu bar from which menus are opened by the user.
     \value MenuItem         An item in a menu or menu bar.
     \value NoRole           The object has no role. This usually indicates an invalid object.
+    \value Note             A section whose content is parenthetic or ancillary to the main content of the resource.
     \value PageTab          A page tab that the user can select to switch to a different page in a dialog.
     \value PageTabList      A list of page tabs.
+    \value Paragraph        A paragraph of text (usually found in documents).
     \value Pane             A generic container.
     \value PopupMenu        A menu which lists options that the user can select to perform an action.
     \value ProgressBar      The object displays the progress of an operation in progress.
@@ -344,6 +352,7 @@ QT_BEGIN_NAMESPACE
     \value Row              A row of cells, usually within a table.
     \value RowHeader        A header for a row of data.
     \value ScrollBar        A scroll bar, which allows the user to scroll the visible area.
+    \value Section          A section (in a document).
     \value Separator        A separator that divides space into logical areas.
     \value Slider           A slider that allows the user to select a value within a given range.
     \value Sound            An object that represents a sound.
@@ -359,6 +368,7 @@ QT_BEGIN_NAMESPACE
     \value Tree             A list of items in a tree structure.
     \value TreeItem         An item in a tree structure.
     \value UserRole         The first value to be used for user defined roles.
+    \value WebDocument      HTML document, usually in a browser.
     \value Whitespace       Blank space between other objects.
     \value Window           A top level window.
 */
@@ -453,9 +463,11 @@ Q_GLOBAL_STATIC_WITH_ARGS(QFactoryLoader, loader,
 #endif
 #endif
 
+// FIXME turn this into one global static struct
 Q_GLOBAL_STATIC(QList<QAccessible::InterfaceFactory>, qAccessibleFactories)
 typedef QHash<QString, QAccessiblePlugin*> QAccessiblePluginsHash;
-Q_GLOBAL_STATIC(QAccessiblePluginsHash, qAccessiblePlugins);
+Q_GLOBAL_STATIC(QAccessiblePluginsHash, qAccessiblePlugins)
+Q_GLOBAL_STATIC(QList<QAccessible::ActivationObserver *>, qAccessibleActivationObservers)
 
 QAccessible::UpdateHandler QAccessible::updateHandler = 0;
 QAccessible::RootObjectHandler QAccessible::rootObjectHandler = 0;
@@ -492,6 +504,7 @@ void QAccessible::cleanup()
 
 static void qAccessibleCleanup()
 {
+    qAccessibleActivationObservers()->clear();
     qAccessibleFactories()->clear();
 }
 
@@ -592,6 +605,44 @@ QAccessible::RootObjectHandler QAccessible::installRootObjectHandler(RootObjectH
 }
 
 /*!
+    \class QAccessible::ActivationObserver
+    \internal
+
+    Interface to listen to activation or deactivation of the accessibility framework.
+    \sa installActivationObserver()
+*/
+
+/*!
+    \internal
+
+    Install \a observer to get notified of activation or deactivation (global accessibility has been enabled or disabled).
+*/
+void QAccessible::installActivationObserver(QAccessible::ActivationObserver *observer)
+{
+    if (!observer)
+        return;
+
+    if (!cleanupAdded) {
+        qAddPostRoutine(qAccessibleCleanup);
+        cleanupAdded = true;
+    }
+    if (qAccessibleActivationObservers()->contains(observer))
+        return;
+    qAccessibleActivationObservers()->append(observer);
+}
+
+/*!
+    \internal
+
+    Remove an \a observer to no longer get notified of state changes.
+    \sa installActivationObserver()
+*/
+void QAccessible::removeActivationObserver(ActivationObserver *observer)
+{
+    qAccessibleActivationObservers()->removeAll(observer);
+}
+
+/*!
     If a QAccessibleInterface implementation exists for the given \a object,
     this function returns a pointer to the implementation; otherwise it
     returns 0.
@@ -744,6 +795,15 @@ bool QAccessible::isActive()
     return false;
 }
 
+/*!
+    \internal
+*/
+void QAccessible::setActive(bool active)
+{
+    for (int i = 0; i < qAccessibleActivationObservers()->count() ;++i)
+        qAccessibleActivationObservers()->at(i)->accessibilityActiveChanged(active);
+}
+
 
 /*!
   Sets the root object of the accessible objects of this application
@@ -793,16 +853,20 @@ void QAccessible::setRootObject(QObject *object)
 */
 void QAccessible::updateAccessibility(QAccessibleEvent *event)
 {
-    if (!isActive())
+    // NOTE: Querying for the accessibleInterface below will result in
+    // resolving and caching the interface, which in some cases will
+    // cache the wrong information as updateAccessibility is called
+    // during construction of widgets. If you see cases where the
+    // cache seems wrong, this call is "to blame", but the code that
+    // caches dynamic data should be updated to handle change events.
+    if (!isActive() || !event->accessibleInterface())
         return;
 
 #ifndef QT_NO_ACCESSIBILITY
     if (event->type() == QAccessible::TableModelChanged) {
-        Q_ASSERT(event->object());
-        if (QAccessibleInterface *iface = QAccessible::queryAccessibleInterface(event->object())) {
-            if (iface->tableInterface())
-                iface->tableInterface()->modelChange(static_cast<QAccessibleTableModelChangeEvent*>(event));
-        }
+        QAccessibleInterface *iface = event->accessibleInterface();
+        if (iface && iface->tableInterface())
+            iface->tableInterface()->modelChange(static_cast<QAccessibleTableModelChangeEvent*>(event));
     }
 
     if (updateHandler) {
@@ -1845,26 +1909,71 @@ QDebug operator<<(QDebug d, const QAccessibleEvent &ev)
 */
 
 /*!
+    \internal
+    Helper for finding line breaks in textBeforeOffset/textAtOffset/textAfterOffset.
+    \a beforeAtAfter is the line we look for. -1 for before, 0 for at and 1 for after.
+*/
+static QString textLineBoundary(int beforeAtAfter, const QString &text, int offset, int *startOffset, int *endOffset)
+{
+    Q_ASSERT(beforeAtAfter >= -1 && beforeAtAfter <= 1);
+    Q_ASSERT(*startOffset == -1 && *endOffset == -1);
+    int length = text.length();
+    Q_ASSERT(offset >= 0 && offset <= length);
+
+    // move offset into the right range (if asking for line before or after
+    if (beforeAtAfter == 1) {
+        offset = text.indexOf(QChar::LineFeed, qMin(offset, length - 1));
+        if (offset < 0)
+            return QString(); // after the last line comes nothing
+        ++offset; // move after the newline
+    } else if (beforeAtAfter == -1) {
+        offset = text.lastIndexOf(QChar::LineFeed, qMax(offset - 1, 0));
+        if (offset < 0)
+            return QString(); // before first line comes nothing
+    }
+
+    if (offset > 0)
+        *startOffset = text.lastIndexOf(QChar::LineFeed, offset - 1);
+    ++*startOffset; // move to the char after the newline (0 if lastIndexOf returned -1)
+
+    *endOffset = text.indexOf(QChar::LineFeed, qMin(offset, length - 1)) + 1; // include newline char
+    if (*endOffset <= 0 || *endOffset > length)
+        *endOffset = length; // if the text doesn't end with a newline it ends at length
+
+    return text.mid(*startOffset, *endOffset - *startOffset);
+}
+
+/*!
     Returns the text item of type \a boundaryType that is close to offset \a offset
     and sets \a startOffset and \a endOffset values to the start and end positions
     of that item; returns an empty string if there is no such an item.
     Sets \a startOffset and \a endOffset values to -1 on error.
+
+    This default implementation is provided for small text edits. A word processor or
+    text editor should provide their own efficient implementations. This function makes no
+    distinction between paragraphs and lines.
+
+    \note this function can not take the cursor position into account. By convention
+    an \a offset of -2 means that this function should use the cursor position as offset.
+    Thus an offset of -2 must be converted to the cursor position before calling this
+    function.
+    An offset of -1 is used for the text length and custom implementations of this function
+    have to return the result as if the length was passed in as offset.
 */
 QString QAccessibleTextInterface::textBeforeOffset(int offset, QAccessible::TextBoundaryType boundaryType,
                                                    int *startOffset, int *endOffset) const
 {
     const QString txt = text(0, characterCount());
 
-    if (txt.isEmpty() || offset < 0 || offset > txt.length()) {
-        *startOffset = *endOffset = -1;
-        return QString();
-    }
-    if (offset == 0) {
-        *startOffset = *endOffset = offset;
+    if (offset == -1)
+        offset = txt.length();
+
+    *startOffset = *endOffset = -1;
+    if (txt.isEmpty() || offset <= 0 || offset > txt.length())
         return QString();
-    }
 
-    QTextBoundaryFinder::BoundaryType type;
+    // type initialized just to silence a compiler warning [-Werror=maybe-uninitialized]
+    QTextBoundaryFinder::BoundaryType type = QTextBoundaryFinder::Grapheme;
     switch (boundaryType) {
     case QAccessible::CharBoundary:
         type = QTextBoundaryFinder::Grapheme;
@@ -1875,11 +1984,15 @@ QString QAccessibleTextInterface::textBeforeOffset(int offset, QAccessible::Text
     case QAccessible::SentenceBoundary:
         type = QTextBoundaryFinder::Sentence;
         break;
+    case QAccessible::LineBoundary:
+    case QAccessible::ParagraphBoundary:
+        // Lines can not use QTextBoundaryFinder since Line there means any potential line-break.
+        return textLineBoundary(-1, txt, offset, startOffset, endOffset);
+    case QAccessible::NoBoundary:
+        // return empty, this function currently only supports single lines, so there can be no line before
+        return QString();
     default:
-        // in any other case return the whole line
-        *startOffset = 0;
-        *endOffset = txt.length();
-        return txt;
+        Q_UNREACHABLE();
     }
 
     // keep behavior in sync with QTextCursor::movePosition()!
@@ -1909,22 +2022,32 @@ QString QAccessibleTextInterface::textBeforeOffset(int offset, QAccessible::Text
     and sets \a startOffset and \a endOffset values to the start and end positions
     of that item; returns an empty string if there is no such an item.
     Sets \a startOffset and \a endOffset values to -1 on error.
+
+    This default implementation is provided for small text edits. A word processor or
+    text editor should provide their own efficient implementations. This function makes no
+    distinction between paragraphs and lines.
+
+    \note this function can not take the cursor position into account. By convention
+    an \a offset of -2 means that this function should use the cursor position as offset.
+    Thus an offset of -2 must be converted to the cursor position before calling this
+    function.
+    An offset of -1 is used for the text length and custom implementations of this function
+    have to return the result as if the length was passed in as offset.
 */
 QString QAccessibleTextInterface::textAfterOffset(int offset, QAccessible::TextBoundaryType boundaryType,
                                                   int *startOffset, int *endOffset) const
 {
     const QString txt = text(0, characterCount());
 
-    if (txt.isEmpty() || offset < 0 || offset > txt.length()) {
-        *startOffset = *endOffset = -1;
-        return QString();
-    }
-    if (offset == txt.length()) {
-        *startOffset = *endOffset = offset;
+    if (offset == -1)
+        offset = txt.length();
+
+    *startOffset = *endOffset = -1;
+    if (txt.isEmpty() || offset < 0 || offset >= txt.length())
         return QString();
-    }
 
-    QTextBoundaryFinder::BoundaryType type;
+    // type initialized just to silence a compiler warning [-Werror=maybe-uninitialized]
+    QTextBoundaryFinder::BoundaryType type = QTextBoundaryFinder::Grapheme;
     switch (boundaryType) {
     case QAccessible::CharBoundary:
         type = QTextBoundaryFinder::Grapheme;
@@ -1935,11 +2058,15 @@ QString QAccessibleTextInterface::textAfterOffset(int offset, QAccessible::TextB
     case QAccessible::SentenceBoundary:
         type = QTextBoundaryFinder::Sentence;
         break;
+    case QAccessible::LineBoundary:
+    case QAccessible::ParagraphBoundary:
+        // Lines can not use QTextBoundaryFinder since Line there means any potential line-break.
+        return textLineBoundary(1, txt, offset, startOffset, endOffset);
+    case QAccessible::NoBoundary:
+        // return empty, this function currently only supports single lines, so there can be no line after
+        return QString();
     default:
-        // in any other case return the whole line
-        *startOffset = 0;
-        *endOffset = txt.length();
-        return txt;
+        Q_UNREACHABLE();
     }
 
     // keep behavior in sync with QTextCursor::movePosition()!
@@ -1947,20 +2074,31 @@ QString QAccessibleTextInterface::textAfterOffset(int offset, QAccessible::TextB
     QTextBoundaryFinder boundary(type, txt);
     boundary.setPosition(offset);
 
-    while (boundary.toNextBoundary() < txt.length()) {
+    while (true) {
+        int toNext = boundary.toNextBoundary();
         if ((boundary.boundaryReasons() & (QTextBoundaryFinder::StartOfItem | QTextBoundaryFinder::EndOfItem)))
             break;
+        if (toNext < 0 || toNext >= txt.length())
+            break; // not found, the boundary might not exist
     }
     Q_ASSERT(boundary.position() <= txt.length());
     *startOffset = boundary.position();
 
-    while (boundary.toNextBoundary() < txt.length()) {
+    while (true) {
+        int toNext = boundary.toNextBoundary();
         if ((boundary.boundaryReasons() & (QTextBoundaryFinder::StartOfItem | QTextBoundaryFinder::EndOfItem)))
             break;
+        if (toNext < 0 || toNext >= txt.length())
+            break; // not found, the boundary might not exist
     }
     Q_ASSERT(boundary.position() <= txt.length());
     *endOffset = boundary.position();
 
+    if ((*startOffset == -1) || (*endOffset == -1) || (*startOffset == *endOffset)) {
+        *endOffset = -1;
+        *startOffset = -1;
+    }
+
     return txt.mid(*startOffset, *endOffset - *startOffset);
 }
 
@@ -1969,22 +2107,35 @@ QString QAccessibleTextInterface::textAfterOffset(int offset, QAccessible::TextB
     and sets \a startOffset and \a endOffset values to the start and end positions
     of that item; returns an empty string if there is no such an item.
     Sets \a startOffset and \a endOffset values to -1 on error.
+
+    This default implementation is provided for small text edits. A word processor or
+    text editor should provide their own efficient implementations. This function makes no
+    distinction between paragraphs and lines.
+
+    \note this function can not take the cursor position into account. By convention
+    an \a offset of -2 means that this function should use the cursor position as offset.
+    Thus an offset of -2 must be converted to the cursor position before calling this
+    function.
+    An offset of -1 is used for the text length and custom implementations of this function
+    have to return the result as if the length was passed in as offset.
 */
 QString QAccessibleTextInterface::textAtOffset(int offset, QAccessible::TextBoundaryType boundaryType,
                                                int *startOffset, int *endOffset) const
 {
     const QString txt = text(0, characterCount());
 
-    if (txt.isEmpty() || offset < 0 || offset > txt.length()) {
-        *startOffset = *endOffset = -1;
+    if (offset == -1)
+        offset = txt.length();
+
+    *startOffset = *endOffset = -1;
+    if (txt.isEmpty() || offset < 0 || offset > txt.length())
         return QString();
-    }
-    if (offset == txt.length()) {
-        *startOffset = *endOffset = offset;
+
+    if (offset == txt.length() && boundaryType == QAccessible::CharBoundary)
         return QString();
-    }
 
-    QTextBoundaryFinder::BoundaryType type;
+    // type initialized just to silence a compiler warning [-Werror=maybe-uninitialized]
+    QTextBoundaryFinder::BoundaryType type = QTextBoundaryFinder::Grapheme;
     switch (boundaryType) {
     case QAccessible::CharBoundary:
         type = QTextBoundaryFinder::Grapheme;
@@ -1995,11 +2146,16 @@ QString QAccessibleTextInterface::textAtOffset(int offset, QAccessible::TextBoun
     case QAccessible::SentenceBoundary:
         type = QTextBoundaryFinder::Sentence;
         break;
-    default:
-        // in any other case return the whole line
+    case QAccessible::LineBoundary:
+    case QAccessible::ParagraphBoundary:
+        // Lines can not use QTextBoundaryFinder since Line there means any potential line-break.
+        return textLineBoundary(0, txt, offset, startOffset, endOffset);
+    case QAccessible::NoBoundary:
         *startOffset = 0;
         *endOffset = txt.length();
         return txt;
+    default:
+        Q_UNREACHABLE();
     }
 
     // keep behavior in sync with QTextCursor::movePosition()!
@@ -2060,7 +2216,6 @@ QString QAccessibleTextInterface::textAtOffset(int offset, QAccessible::TextBoun
     \class QAccessibleEditableTextInterface
     \ingroup accessibility
     \inmodule QtGui
-    \internal
 
     \brief The QAccessibleEditableTextInterface class implements support for objects with editable text.
 
@@ -2478,6 +2633,23 @@ struct QAccessibleActionStrings
     const QString showMenuAction;
     const QString setFocusAction;
     const QString toggleAction;
+
+    QString localizedDescription(const QString &actionName)
+    {
+        if (actionName == pressAction)
+            return QAccessibleActionInterface::tr("Triggers the action");
+        else if (actionName == increaseAction)
+            return QAccessibleActionInterface::tr("Increase the value");
+        else if (actionName == decreaseAction)
+            return QAccessibleActionInterface::tr("Decrease the value");
+        else if (actionName == showMenuAction)
+            return QAccessibleActionInterface::tr("Shows the menu");
+        else if (actionName == setFocusAction)
+            return QAccessibleActionInterface::tr("Sets the focus");
+        else if (actionName == toggleAction)
+            return QAccessibleActionInterface::tr("Toggles the state");
+        return QString();
+    }
 };
 
 Q_GLOBAL_STATIC(QAccessibleActionStrings, accessibleActionStrings)
@@ -2489,21 +2661,7 @@ QString QAccessibleActionInterface::localizedActionName(const QString &actionNam
 
 QString QAccessibleActionInterface::localizedActionDescription(const QString &actionName) const
 {
-    const QAccessibleActionStrings *strings = accessibleActionStrings();
-    if (actionName == strings->pressAction)
-        return tr("Triggers the action");
-    else if (actionName == strings->increaseAction)
-        return tr("Increase the value");
-    else if (actionName == strings->decreaseAction)
-        return tr("Decrease the value");
-    else if (actionName == strings->showMenuAction)
-        return tr("Shows the menu");
-    else if (actionName == strings->setFocusAction)
-        return tr("Sets the focus");
-    else if (actionName == strings->toggleAction)
-        return tr("Toggles the state");
-
-    return QString();
+    return accessibleActionStrings()->localizedDescription(actionName);
 }
 
 /*!
@@ -2560,6 +2718,13 @@ const QString &QAccessibleActionInterface::toggleAction()
     return accessibleActionStrings()->toggleAction;
 }
 
+/*! \internal */
+QString qAccessibleLocalizedActionDescription(const QString &actionName)
+{
+    return accessibleActionStrings()->localizedDescription(actionName);
+}
+
+
 #endif
 
 QT_END_NAMESPACE
diff --git a/src/gui/accessible/qaccessible.h b/src/gui/accessible/qaccessible.h
index 25ce161940..0583a8c691 100644
--- a/src/gui/accessible/qaccessible.h
+++ b/src/gui/accessible/qaccessible.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,7 +57,6 @@ class QAccessibleEvent;
 class QWindow;
 class QTextCursor;
 
-// We need to inherit QObject to expose the enums to QML.
 class Q_GUI_EXPORT QAccessible
 {
     Q_GADGET
@@ -281,7 +272,7 @@ public:
         HotkeyField    = 0x00000032,
         Slider         = 0x00000033,
         SpinBox        = 0x00000034,
-        Canvas         = 0x00000035,
+        Canvas         = 0x00000035, // Diagram for MSAA
         Animation      = 0x00000036,
         Equation       = 0x00000037,
         ButtonDropDown = 0x00000038, // The object represents a button that expands a grid.
@@ -297,6 +288,58 @@ public:
         LayeredPane    = 0x00000080,
         Terminal       = 0x00000081,
         Desktop        = 0x00000082,
+        Paragraph      = 0x00000083,
+        WebDocument    = 0x00000084,
+        Section        = 0x00000085,
+
+        // IAccessible2 roles
+        // IA2_ROLE_CANVAS = 0x401, ### Qt 6 use this one instead of Canvas above
+        // IA2_ROLE_CAPTION = 0x402,
+        // IA2_ROLE_CHECK_MENU_ITEM = 0x403,
+        ColorChooser = 0x404,
+        // IA2_ROLE_DATE_EDITOR = 0x405,
+        // IA2_ROLE_DESKTOP_ICON = 0x406,
+        // IA2_ROLE_DESKTOP_PANE = 0x407,
+        // IA2_ROLE_DIRECTORY_PANE = 0x408,
+        // IA2_ROLE_EDITBAR = 0x409,
+        // IA2_ROLE_EMBEDDED_OBJECT = 0x40A,
+        // IA2_ROLE_ENDNOTE = 0x40B,
+        // IA2_ROLE_FILE_CHOOSER = 0x40C,
+        // IA2_ROLE_FONT_CHOOSER = 0x40D,
+        Footer      = 0x40E,
+        // IA2_ROLE_FOOTNOTE = 0x40F,
+        Form        = 0x410,
+        // some platforms (windows and at-spi) use Frame for regular windows
+        // because window was taken for tool/dock windows by MSAA
+        // Frame = 0x411,
+        // IA2_ROLE_GLASS_PANE = 0x412,
+        // IA2_ROLE_HEADER = 0x413,
+        Heading  = 0x414,
+        // IA2_ROLE_ICON = 0x415,
+        // IA2_ROLE_IMAGE_MAP = 0x416,
+        // IA2_ROLE_INPUT_METHOD_WINDOW = 0x417,
+        // IA2_ROLE_INTERNAL_FRAME = 0x418,
+        // IA2_ROLE_LABEL = 0x419,
+        // IA2_ROLE_LAYERED_PANE = 0x41A,
+        Note = 0x41B,
+        // IA2_ROLE_OPTION_PANE = 0x41C,
+        // IA2_ROLE_PAGE = 0x41D,
+        // IA2_ROLE_PARAGRAPH = 0x42E,
+        // IA2_ROLE_RADIO_MENU_ITEM = 0x41F,
+        // IA2_ROLE_REDUNDANT_OBJECT = 0x420,
+        // IA2_ROLE_ROOT_PANE = 0x421,
+        // IA2_ROLE_RULER = 0x422,
+        // IA2_ROLE_SCROLL_PANE = 0x423,
+        // IA2_ROLE_SECTION = 0x424,
+        // IA2_ROLE_SHAPE = 0x425,
+        // IA2_ROLE_SPLIT_PANE = 0x426,
+        // IA2_ROLE_TEAR_OFF_MENU = 0x427,
+        // IA2_ROLE_TERMINAL = 0x428,
+        // IA2_ROLE_TEXT_FRAME = 0x429,
+        // IA2_ROLE_TOGGLE_BUTTON = 0x42A,
+        // IA2_ROLE_VIEW_PORT = 0x42B,
+        ComplementaryContent = 0x42C,
+
         UserRole       = 0x0000ffff
     };
 
@@ -350,6 +393,15 @@ public:
     static UpdateHandler installUpdateHandler(UpdateHandler);
     static RootObjectHandler installRootObjectHandler(RootObjectHandler);
 
+    class ActivationObserver
+    {
+    public:
+        virtual ~ActivationObserver() {}
+        virtual void accessibilityActiveChanged(bool active) = 0;
+    };
+    static void installActivationObserver(ActivationObserver *);
+    static void removeActivationObserver(ActivationObserver *);
+
     static QAccessibleInterface *queryAccessibleInterface(QObject *);
     static Id uniqueId(QAccessibleInterface *iface);
     static QAccessibleInterface *accessibleInterface(Id uniqueId);
@@ -363,6 +415,7 @@ public:
     static void updateAccessibility(QAccessibleEvent *event);
 
     static bool isActive();
+    static void setActive(bool active);
     static void setRootObject(QObject *object);
 
     static void cleanup();
@@ -889,6 +942,7 @@ Q_DECLARE_INTERFACE(QAccessibleInterface, QAccessibleInterface_iid)
 
 Q_GUI_EXPORT const char *qAccessibleRoleString(QAccessible::Role role);
 Q_GUI_EXPORT const char *qAccessibleEventString(QAccessible::Event event);
+Q_GUI_EXPORT QString qAccessibleLocalizedActionDescription(const QString &actionName);
 
 #ifndef QT_NO_DEBUG_STREAM
 Q_GUI_EXPORT QDebug operator<<(QDebug d, const QAccessibleInterface *iface);
diff --git a/src/gui/accessible/qaccessiblebridge.cpp b/src/gui/accessible/qaccessiblebridge.cpp
index 60bc1ae0d1..21cb0ef35c 100644
--- a/src/gui/accessible/qaccessiblebridge.cpp
+++ b/src/gui/accessible/qaccessiblebridge.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qaccessiblebridge.h b/src/gui/accessible/qaccessiblebridge.h
index 0a0002af2c..c3dba47711 100644
--- a/src/gui/accessible/qaccessiblebridge.h
+++ b/src/gui/accessible/qaccessiblebridge.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qaccessiblecache.cpp b/src/gui/accessible/qaccessiblecache.cpp
index 09c155515e..cf5290ed38 100644
--- a/src/gui/accessible/qaccessiblecache.cpp
+++ b/src/gui/accessible/qaccessiblecache.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -121,7 +113,7 @@ void QAccessibleCache::deleteInterface(QAccessible::Id id, QObject *obj)
         objectToId.remove(obj);
     delete iface;
 
-#ifdef Q_OS_MACX
+#ifdef Q_OS_MAC
     removeCocoaElement(id);
 #endif
 }
diff --git a/src/gui/accessible/qaccessiblecache_mac.mm b/src/gui/accessible/qaccessiblecache_mac.mm
index 6ed461d371..97c0c7e097 100644
--- a/src/gui/accessible/qaccessiblecache_mac.mm
+++ b/src/gui/accessible/qaccessiblecache_mac.mm
@@ -41,27 +41,23 @@
 
 #include "qaccessiblecache_p.h"
 
-#ifdef Q_OS_OSX
-
 QT_BEGIN_NAMESPACE
 
-void QAccessibleCache::insertElement(QAccessible::Id axid, QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *element) const
+void QAccessibleCache::insertElement(QAccessible::Id axid, QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *element) const
 {
     cocoaElements[axid] = element;
 }
 
 void QAccessibleCache::removeCocoaElement(QAccessible::Id axid)
 {
-    QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *element = elementForId(axid);
+    QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *element = elementForId(axid);
     [element invalidate];
     cocoaElements.remove(axid);
 }
 
-QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *QAccessibleCache::elementForId(QAccessible::Id axid) const
+QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *QAccessibleCache::elementForId(QAccessible::Id axid) const
 {
     return cocoaElements.value(axid);
 }
 
 QT_END_NAMESPACE
-
-#endif
diff --git a/src/gui/accessible/qaccessiblecache_p.h b/src/gui/accessible/qaccessiblecache_p.h
index 933c6f7313..97d2b41bbb 100644
--- a/src/gui/accessible/qaccessiblecache_p.h
+++ b/src/gui/accessible/qaccessiblecache_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,7 +51,7 @@
 
 #include "qaccessible.h"
 
-Q_FORWARD_DECLARE_OBJC_CLASS(QT_MANGLE_NAMESPACE(QCocoaAccessibleElement));
+Q_FORWARD_DECLARE_OBJC_CLASS(QT_MANGLE_NAMESPACE(QMacAccessibilityElement));
 
 QT_BEGIN_NAMESPACE
 
@@ -73,9 +65,9 @@ public:
     QAccessible::Id insert(QObject *object, QAccessibleInterface *iface) const;
     void deleteInterface(QAccessible::Id id, QObject *obj = 0);
 
-#ifdef Q_OS_OSX
-    QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *elementForId(QAccessible::Id axid) const;
-    void insertElement(QAccessible::Id axid, QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *element) const;
+#ifdef Q_OS_MAC
+    QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *elementForId(QAccessible::Id axid) const;
+    void insertElement(QAccessible::Id axid, QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *element) const;
 #endif
 
 private Q_SLOTS:
@@ -87,9 +79,9 @@ private:
     mutable QHash<QAccessible::Id, QAccessibleInterface *> idToInterface;
     mutable QHash<QObject *, QAccessible::Id> objectToId;
 
-#ifdef Q_OS_OSX
+#ifdef Q_OS_MAC
     void removeCocoaElement(QAccessible::Id axid);
-    mutable QHash<QAccessible::Id, QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *> cocoaElements;
+    mutable QHash<QAccessible::Id, QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *> cocoaElements;
 #endif
 
     friend class QAccessible;
diff --git a/src/gui/accessible/qaccessibleobject.cpp b/src/gui/accessible/qaccessibleobject.cpp
index b01c8e45db..7b0549874b 100644
--- a/src/gui/accessible/qaccessibleobject.cpp
+++ b/src/gui/accessible/qaccessibleobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qaccessibleobject.h b/src/gui/accessible/qaccessibleobject.h
index 5cc71a121b..8d793e5fb7 100644
--- a/src/gui/accessible/qaccessibleobject.h
+++ b/src/gui/accessible/qaccessibleobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qaccessibleplugin.cpp b/src/gui/accessible/qaccessibleplugin.cpp
index 17b3f52805..1b71b14465 100644
--- a/src/gui/accessible/qaccessibleplugin.cpp
+++ b/src/gui/accessible/qaccessibleplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qaccessibleplugin.h b/src/gui/accessible/qaccessibleplugin.h
index ac56c83f98..fc2086cb20 100644
--- a/src/gui/accessible/qaccessibleplugin.h
+++ b/src/gui/accessible/qaccessibleplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/accessible/qplatformaccessibility.cpp b/src/gui/accessible/qplatformaccessibility.cpp
index 490fb7a407..6655de7b97 100644
--- a/src/gui/accessible/qplatformaccessibility.cpp
+++ b/src/gui/accessible/qplatformaccessibility.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -139,6 +131,12 @@ void QPlatformAccessibility::cleanup()
     qDeleteAll(*bridges());
 }
 
+void QPlatformAccessibility::setActive(bool active)
+{
+    m_active = active;
+    QAccessible::setActive(active);
+}
+
 #endif // QT_NO_ACCESSIBILITY
 
 QT_END_NAMESPACE
diff --git a/src/gui/accessible/qplatformaccessibility.h b/src/gui/accessible/qplatformaccessibility.h
index f86a9b6157..3ef2ac1557 100644
--- a/src/gui/accessible/qplatformaccessibility.h
+++ b/src/gui/accessible/qplatformaccessibility.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,7 +62,7 @@ public:
     virtual void cleanup();
 
     inline bool isActive() const { return m_active; }
-    inline void setActive(bool active) { m_active = active; }
+    void setActive(bool active);
 
 private:
     bool m_active;
diff --git a/src/gui/animation/qguivariantanimation.cpp b/src/gui/animation/qguivariantanimation.cpp
index 2cd31696ba..1906040b5e 100644
--- a/src/gui/animation/qguivariantanimation.cpp
+++ b/src/gui/animation/qguivariantanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/doc/images/qpixelformat-argb32buffer.png b/src/gui/doc/images/qpixelformat-argb32buffer.png
new file mode 100644
index 0000000000..5888f0b03d
--- /dev/null
+++ b/src/gui/doc/images/qpixelformat-argb32buffer.png
diff --git a/src/gui/doc/qtgui.qdocconf b/src/gui/doc/qtgui.qdocconf
index b1707e1eef..e2194839d2 100644
--- a/src/gui/doc/qtgui.qdocconf
+++ b/src/gui/doc/qtgui.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtGui
 description             = Qt GUI Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = gui
diff --git a/src/gui/doc/snippets/code/src_gui_image_qimagewriter.cpp b/src/gui/doc/snippets/code/src_gui_image_qimagewriter.cpp
index f6fef00ab0..11b0a32ac4 100644
--- a/src/gui/doc/snippets/code/src_gui_image_qimagewriter.cpp
+++ b/src/gui/doc/snippets/code/src_gui_image_qimagewriter.cpp
@@ -57,3 +57,10 @@ QImageWriter writer(fileName);
 if (writer.supportsOption(QImageIOHandler::Description))
     writer.setText("Author", "John Smith");
 //! [2]
+
+//! [3]
+QImageWriter writer("some/image.dds");
+if (writer.supportsOption(QImageIOHandler::SubType))
+    writer.setSubType("A8R8G8B8");
+writer.write(image);
+//! [3]
diff --git a/src/gui/doc/src/dnd.qdoc b/src/gui/doc/src/dnd.qdoc
index 9f7fdc7fbf..844848c76c 100644
--- a/src/gui/doc/src/dnd.qdoc
+++ b/src/gui/doc/src/dnd.qdoc
@@ -399,13 +399,15 @@
 
     On X11, the public \l{http://www.newplanetsoftware.com/xdnd/}{XDND
     protocol} is used, while on Windows Qt uses the OLE standard, and
-    Qt for Mac OS X uses the Cocoa Drag Manager. On X11, XDND uses MIME,
+    Qt for OS X uses the Cocoa Drag Manager. On X11, XDND uses MIME,
     so no translation is necessary. The Qt API is the same regardless of
     the platform. On Windows, MIME-aware applications can communicate by
     using clipboard format names that are MIME types. Already some
     Windows applications use MIME naming conventions for their
-    clipboard formats. Internally, Qt uses QWindowsMime and
-    QMacPasteboardMime for translating proprietary clipboard formats
-    to and from MIME types.
+    clipboard formats.
+
+    Custom classes for translating proprietary clipboard formats can be
+    registered by reimplementing QWinMime on Windows or
+    QMacPasteboardMime on OS X.
 
 */
diff --git a/src/gui/doc/src/qtgui.qdoc b/src/gui/doc/src/qtgui.qdoc
index 0e05a617e1..404b7be8d5 100644
--- a/src/gui/doc/src/qtgui.qdoc
+++ b/src/gui/doc/src/qtgui.qdoc
@@ -68,7 +68,7 @@
     higher level API's, like Qt Quick, that are much more suitable
     than the enablers found in the Qt GUI module.
 
-    \section1 Getting started
+    \section1 Getting Started
 
     To include the definitions of the module's classes, use the
     following directive:
@@ -170,7 +170,7 @@
 
 
 
-    \section1 Qt GUI prior to Qt 5.0
+    \section1 Qt GUI Prior to Qt 5.0
 
     Prior to Qt 5.0, the Qt GUI module was the monolithic container
     for all things relating to graphical user interfaces in Qt, and
diff --git a/src/gui/image/image.pri b/src/gui/image/image.pri
index bbdd0f3da7..7022a6efd0 100644
--- a/src/gui/image/image.pri
+++ b/src/gui/image/image.pri
@@ -78,12 +78,8 @@ contains(QT_CONFIG, jpeg):include($$PWD/qjpeghandler.pri)
 contains(QT_CONFIG, gif):include($$PWD/qgifhandler.pri)
 
 # SIMD
-contains(QT_CPU_FEATURES.$$QT_ARCH, neon) {
-    SOURCES += image/qimage_neon.cpp
-}
-contains(QT_CPU_FEATURES.$$QT_ARCH, sse2) {
-    SOURCES += image/qimage_sse2.cpp
-    SSSE3_SOURCES += image/qimage_ssse3.cpp
-}
+SSE2_SOURCES += image/qimage_sse2.cpp
+SSSE3_SOURCES += image/qimage_ssse3.cpp
+NEON_SOURCES += image/qimage_neon.cpp
 MIPS_DSPR2_SOURCES += image/qimage_mips_dspr2.cpp
 MIPS_DSPR2_ASM += image/qimage_mips_dspr2_asm.S
diff --git a/src/gui/image/qbitmap.cpp b/src/gui/image/qbitmap.cpp
index 78313d2c52..ef00cbddaf 100644
--- a/src/gui/image/qbitmap.cpp
+++ b/src/gui/image/qbitmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qbitmap.h b/src/gui/image/qbitmap.h
index f8bd2feed7..ec4fc08526 100644
--- a/src/gui/image/qbitmap.h
+++ b/src/gui/image/qbitmap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qbmphandler.cpp b/src/gui/image/qbmphandler.cpp
index bb79a139b3..21c1a2f813 100644
--- a/src/gui/image/qbmphandler.cpp
+++ b/src/gui/image/qbmphandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -792,24 +784,19 @@ bool QBmpHandler::write(const QImage &img)
 
     QImage image;
     switch (img.format()) {
-    case QImage::Format_ARGB8565_Premultiplied:
-    case QImage::Format_ARGB8555_Premultiplied:
-    case QImage::Format_ARGB6666_Premultiplied:
-    case QImage::Format_ARGB4444_Premultiplied:
-    case QImage::Format_RGBA8888:
-    case QImage::Format_RGBA8888_Premultiplied:
-        image = img.convertToFormat(QImage::Format_ARGB32);
-        break;
-    case QImage::Format_RGB16:
-    case QImage::Format_RGB888:
-    case QImage::Format_RGB666:
-    case QImage::Format_RGB555:
-    case QImage::Format_RGB444:
-    case QImage::Format_RGBX8888:
-        image = img.convertToFormat(QImage::Format_RGB32);
+    case QImage::Format_Mono:
+    case QImage::Format_MonoLSB:
+    case QImage::Format_Indexed8:
+    case QImage::Format_RGB32:
+    case QImage::Format_ARGB32:
+        image = img;
         break;
     default:
-        image = img;
+        if (img.hasAlphaChannel())
+            image = img.convertToFormat(QImage::Format_ARGB32);
+        else
+            image = img.convertToFormat(QImage::Format_RGB32);
+        break;
     }
 
     QIODevice *d = device();
diff --git a/src/gui/image/qbmphandler_p.h b/src/gui/image/qbmphandler_p.h
index e81b821a51..1a3b159c95 100644
--- a/src/gui/image/qbmphandler_p.h
+++ b/src/gui/image/qbmphandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qgifhandler.cpp b/src/gui/image/qgifhandler.cpp
index 91588edd50..03e46ab578 100644
--- a/src/gui/image/qgifhandler.cpp
+++ b/src/gui/image/qgifhandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ** WARNING:
diff --git a/src/gui/image/qgifhandler_p.h b/src/gui/image/qgifhandler_p.h
index 80c9e145c5..40bff19e7a 100644
--- a/src/gui/image/qgifhandler_p.h
+++ b/src/gui/image/qgifhandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ** WARNING:
diff --git a/src/gui/image/qicon.cpp b/src/gui/image/qicon.cpp
index 681e7e3f79..adbd21a8a0 100644
--- a/src/gui/image/qicon.cpp
+++ b/src/gui/image/qicon.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -989,10 +981,16 @@ void QIcon::addPixmap(const QPixmap &pixmap, Mode mode, State state)
     QImageWriter::supportedImageFormats() functions to retrieve a
     complete list of the supported file formats.
 
-    Note: When you add a non-empty filename to a QIcon, the icon becomes
+    If a high resolution version of the image exists (identified by
+    the suffix \c @2x on the base name), it is automatically loaded
+    and added with the \e{device pixel ratio} set to a value of 2.
+    This can be disabled by setting the environment variable
+    \c QT_HIGHDPI_DISABLE_2X_IMAGE_LOADING (see QImageReader).
+
+    \note When you add a non-empty filename to a QIcon, the icon becomes
     non-null, even if the file doesn't exist or points to a corrupt file.
 
-    \sa addPixmap()
+    \sa addPixmap(), QPixmap::devicePixelRatio()
  */
 void QIcon::addFile(const QString &fileName, const QSize &size, Mode mode, State state)
 {
@@ -1321,8 +1319,20 @@ QDataStream &operator>>(QDataStream &s, QIcon &icon)
 #ifndef QT_NO_DEBUG_STREAM
 QDebug operator<<(QDebug dbg, const QIcon &i)
 {
-    dbg.nospace() << "QIcon(" << i.name() << ')';
-    return dbg.space();
+    QDebugStateSaver saver(dbg);
+    dbg.resetFormat();
+    dbg.nospace();
+    dbg << "QIcon(";
+    if (i.isNull()) {
+        dbg << "null";
+    } else {
+        if (!i.name().isEmpty())
+            dbg << i.name() << ',';
+        dbg << "availableSizes[normal,Off]=" << i.availableSizes()
+            << ",cacheKey=" << showbase << hex << i.cacheKey() << dec << noshowbase;
+    }
+    dbg << ')';
+    return dbg;
 }
 #endif
 
diff --git a/src/gui/image/qicon.h b/src/gui/image/qicon.h
index f1a78b508c..717bb55404 100644
--- a/src/gui/image/qicon.h
+++ b/src/gui/image/qicon.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qicon_p.h b/src/gui/image/qicon_p.h
index 68cd4a5452..4896aa89c0 100644
--- a/src/gui/image/qicon_p.h
+++ b/src/gui/image/qicon_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -129,7 +121,7 @@ private:
     QPixmapIconEngineEntry *tryMatch(const QSize &size, QIcon::Mode mode, QIcon::State state);
     QVector<QPixmapIconEngineEntry> pixmaps;
 
-    friend QDataStream &operator<<(QDataStream &s, const QIcon &icon);
+    friend Q_GUI_EXPORT QDataStream &operator<<(QDataStream &s, const QIcon &icon);
     friend class QIconThemeEngine;
 };
 
diff --git a/src/gui/image/qiconengine.cpp b/src/gui/image/qiconengine.cpp
index ce52b9fcf1..56a0288bf6 100644
--- a/src/gui/image/qiconengine.cpp
+++ b/src/gui/image/qiconengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qiconengine.h b/src/gui/image/qiconengine.h
index 9fb21adf97..0078590bb5 100644
--- a/src/gui/image/qiconengine.h
+++ b/src/gui/image/qiconengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qiconengineplugin.cpp b/src/gui/image/qiconengineplugin.cpp
index 1945ee5437..66bb0cbbec 100644
--- a/src/gui/image/qiconengineplugin.cpp
+++ b/src/gui/image/qiconengineplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qiconengineplugin.h b/src/gui/image/qiconengineplugin.h
index a62659f8cb..2ef6c9f4f4 100644
--- a/src/gui/image/qiconengineplugin.h
+++ b/src/gui/image/qiconengineplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qiconloader.cpp b/src/gui/image/qiconloader.cpp
index 9e979023cd..750e253dee 100644
--- a/src/gui/image/qiconloader.cpp
+++ b/src/gui/image/qiconloader.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,7 +61,7 @@ Q_GLOBAL_STATIC(QIconLoader, iconLoaderInstance)
 static QString fallbackTheme()
 {
     if (const QPlatformTheme *theme = QGuiApplicationPrivate::platformTheme()) {
-        const QVariant themeHint = theme->themeHint(QPlatformTheme::SystemIconThemeName);
+        const QVariant themeHint = theme->themeHint(QPlatformTheme::SystemIconFallbackThemeName);
         if (themeHint.isValid())
             return themeHint.toString();
     }
@@ -176,7 +168,6 @@ QIconTheme::QIconTheme(const QString &themeName)
 {
     QFile themeIndex;
 
-    QList <QIconDirInfo> keyList;
     QStringList iconDirs = QIcon::themeSearchPaths();
     for ( int i = 0 ; i < iconDirs.size() ; ++i) {
         QDir iconDir(iconDirs[i]);
@@ -269,7 +260,7 @@ QThemeIconEntries QIconLoader::findIconHelper(const QString &themeName,
     }
 
     QString contentDir = theme.contentDir() + QLatin1Char('/');
-    QList<QIconDirInfo> subDirs = theme.keyList();
+    const QVector<QIconDirInfo> subDirs = theme.keyList();
 
     const QString svgext(QLatin1String(".svg"));
     const QString pngext(QLatin1String(".png"));
@@ -333,9 +324,7 @@ QIconLoaderEngine::QIconLoaderEngine(const QString& iconName)
 
 QIconLoaderEngine::~QIconLoaderEngine()
 {
-    while (!m_entries.isEmpty())
-        delete m_entries.takeLast();
-    Q_ASSERT(m_entries.size() == 0);
+    qDeleteAll(m_entries);
 }
 
 QIconLoaderEngine::QIconLoaderEngine(const QIconLoaderEngine &other)
@@ -371,10 +360,8 @@ void QIconLoaderEngine::ensureLoaded()
 {
     if (!(QIconLoader::instance()->themeKey() == m_key)) {
 
-        while (!m_entries.isEmpty())
-            delete m_entries.takeLast();
+        qDeleteAll(m_entries);
 
-        Q_ASSERT(m_entries.size() == 0);
         m_entries = QIconLoader::instance()->loadIcon(m_iconName);
         m_key = QIconLoader::instance()->themeKey();
     }
@@ -448,8 +435,10 @@ QIconLoaderEngineEntry *QIconLoaderEngine::entryForSize(const QSize &size)
     // Note that m_entries are sorted so that png-files
     // come first
 
+    const int numEntries = m_entries.size();
+
     // Search for exact matches first
-    for (int i = 0; i < m_entries.count(); ++i) {
+    for (int i = 0; i < numEntries; ++i) {
         QIconLoaderEngineEntry *entry = m_entries.at(i);
         if (directoryMatchesSize(entry->dir, iconsize)) {
             return entry;
@@ -459,7 +448,7 @@ QIconLoaderEngineEntry *QIconLoaderEngine::entryForSize(const QSize &size)
     // Find the minimum distance icon
     int minimalSize = INT_MAX;
     QIconLoaderEngineEntry *closestMatch = 0;
-    for (int i = 0; i < m_entries.count(); ++i) {
+    for (int i = 0; i < numEntries; ++i) {
         QIconLoaderEngineEntry *entry = m_entries.at(i);
         int distance = directorySizeDistance(entry->dir, iconsize);
         if (distance < minimalSize) {
@@ -564,14 +553,16 @@ void QIconLoaderEngine::virtual_hook(int id, void *data)
         {
             QIconEngine::AvailableSizesArgument &arg
                     = *reinterpret_cast<QIconEngine::AvailableSizesArgument*>(data);
-            const QList<QIconDirInfo> directoryKey = QIconLoader::instance()->theme().keyList();
-            arg.sizes.clear();
+            const int N = m_entries.size();
+            QList<QSize> sizes;
+            sizes.reserve(N);
 
             // Gets all sizes from the DirectoryInfo entries
-            for (int i = 0 ; i < m_entries.size() ; ++i) {
+            for (int i = 0; i < N; ++i) {
                 int size = m_entries.at(i)->dir.size;
-                arg.sizes.append(QSize(size, size));
+                sizes.append(QSize(size, size));
             }
+            arg.sizes.swap(sizes); // commit
         }
         break;
     case QIconEngine::IconNameHook:
diff --git a/src/gui/image/qiconloader_p.h b/src/gui/image/qiconloader_p.h
index 419d93d576..50a6e6d3a7 100644
--- a/src/gui/image/qiconloader_p.h
+++ b/src/gui/image/qiconloader_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,6 +54,8 @@
 #include <private/qicon_p.h>
 #include <private/qfactoryloader_p.h>
 #include <QtCore/QHash>
+#include <QtCore/QVector>
+#include <QtCore/QTypeInfo>
 
 QT_BEGIN_NAMESPACE
 
@@ -84,6 +78,7 @@ struct QIconDirInfo
     short threshold;
     Type type : 4;
 };
+Q_DECLARE_TYPEINFO(QIconDirInfo, Q_MOVABLE_TYPE);
 
 class QIconLoaderEngineEntry
  {
@@ -99,13 +94,13 @@ public:
 
 struct ScalableEntry : public QIconLoaderEngineEntry
 {
-    QPixmap pixmap(const QSize &size, QIcon::Mode mode, QIcon::State state);
+    QPixmap pixmap(const QSize &size, QIcon::Mode mode, QIcon::State state) Q_DECL_OVERRIDE;
     QIcon svgIcon;
 };
 
 struct PixmapEntry : public QIconLoaderEngineEntry
 {
-    QPixmap pixmap(const QSize &size, QIcon::Mode mode, QIcon::State state);
+    QPixmap pixmap(const QSize &size, QIcon::Mode mode, QIcon::State state) Q_DECL_OVERRIDE;
     QPixmap basePixmap;
 };
 
@@ -144,18 +139,18 @@ public:
     QIconTheme(const QString &name);
     QIconTheme() : m_valid(false) {}
     QStringList parents() { return m_parents; }
-    QList <QIconDirInfo> keyList() { return m_keyList; }
+    QVector<QIconDirInfo> keyList() { return m_keyList; }
     QString contentDir() { return m_contentDir; }
     bool isValid() { return m_valid; }
 
 private:
     QString m_contentDir;
-    QList <QIconDirInfo> m_keyList;
+    QVector<QIconDirInfo> m_keyList;
     QStringList m_parents;
     bool m_valid;
 };
 
-class Q_GUI_EXPORT QIconLoader : public QObject
+class Q_GUI_EXPORT QIconLoader
 {
 public:
     QIconLoader();
diff --git a/src/gui/image/qimage.cpp b/src/gui/image/qimage.cpp
index 3c25aa848d..4e10b4cb4b 100644
--- a/src/gui/image/qimage.cpp
+++ b/src/gui/image/qimage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -222,6 +214,16 @@ bool QImageData::checkForAlphaPixels() const
         }
     } break;
 
+    case QImage::Format_A2BGR30_Premultiplied:
+    case QImage::Format_A2RGB30_Premultiplied: {
+        uchar *bits = data;
+        for (int y=0; y<height && !has_alpha_pixels; ++y) {
+            for (int x=0; x<width; ++x)
+                has_alpha_pixels |= (((uint *)bits)[x] & 0xc0000000) != 0xc0000000;
+            bits += bytes_per_line;
+        }
+    } break;
+
     case QImage::Format_ARGB8555_Premultiplied:
     case QImage::Format_ARGB8565_Premultiplied: {
         uchar *bits = data;
@@ -650,7 +652,9 @@ bool QImageData::checkForAlphaPixels() const
 
     The following image formats are available in Qt. Values from Format_ARGB8565_Premultiplied
     to Format_ARGB4444_Premultiplied were added in Qt 4.4. Values Format_RGBX8888, Format_RGBA8888
-    and Format_RGBA8888_Premultiplied were added in Qt 5.2. See the notes after the table.
+    and Format_RGBA8888_Premultiplied were added in Qt 5.2. Values Format_BGR30, Format_A2BGR30_Premultiplied,
+    Format_RGB30, Format_A2RGB30_Premultiplied were added in Qt 5.4.
+    See the notes after the table.
 
     \value Format_Invalid   The image is invalid.
     \value Format_Mono      The image is stored using 1-bit per pixel. Bytes are
@@ -701,6 +705,10 @@ bool QImageData::checkForAlphaPixels() const
                              is the same on any architecture if read as bytes 0xRR,0xGG,0xBB,0xAA.
     \value Format_RGBA8888_Premultiplied    The image is stored using a
                             premultiplied 32-bit byte-ordered RGBA format (8-8-8-8).
+    \value Format_BGR30      The image is stored using a 32-bit BGR format (x-10-10-10).
+    \value Format_A2BGR30_Premultiplied    The image is stored using a 32-bit premultiplied ABGR format (2-10-10-10).
+    \value Format_RGB30      The image is stored using a 32-bit RGB format (x-10-10-10).
+    \value Format_A2RGB30_Premultiplied    The image is stored using a 32-bit premultiplied ARGB format (2-10-10-10).
 
     \note Drawing into a QImage with QImage::Format_Indexed8 is not
     supported.
@@ -708,6 +716,9 @@ bool QImageData::checkForAlphaPixels() const
     \note Do not render into ARGB32 images using QPainter.  Using
     QImage::Format_ARGB32_Premultiplied is significantly faster.
 
+    \note Formats with more than 8 bit per color channel will only be processed by the raster engine using 8 bit
+    per color.
+
     \sa format(), convertToFormat()
 */
 
@@ -778,7 +789,6 @@ QImageData *QImageData::create(uchar *data, int width, int height,  int bpl, QIm
         || INT_MAX/sizeof(uchar *) < uint(height)
         || INT_MAX/uint(depth) < uint(width)
         || bpl <= 0
-        || height <= 0
         || bpl < min_bytes_per_line
         || INT_MAX/uint(bpl) < uint(height))
         return d;                                        // invalid parameter(s)
@@ -1349,7 +1359,7 @@ void QImage::setColorTable(const QVector<QRgb> colors)
     if (!d)
         return;
 
-    d->colortable = colors;
+    d->colortable = qMove(const_cast<QVector<QRgb>&>(colors));
     d->has_alpha_clut = false;
     for (int i = 0; i < d->colortable.size(); ++i) {
         if (qAlpha(d->colortable.at(i)) != 255) {
@@ -1372,14 +1382,14 @@ QVector<QRgb> QImage::colorTable() const
 
 /*!
     Returns the device pixel ratio for the image. This is the
-    ratio between image pixels and device-independent pixels.
+    ratio between \e{device pixels} and \e{device independent pixels}.
 
     Use this function when calculating layout geometry based on
     the image size: QSize layoutSize = image.size() / image.devicePixelRatio()
 
     The default value is 1.0.
 
-    \sa setDevicePixelRatio()
+    \sa setDevicePixelRatio(), QImageReader
 */
 qreal QImage::devicePixelRatio() const
 {
@@ -1404,7 +1414,8 @@ qreal QImage::devicePixelRatio() const
     image size will take the ratio into account:
     QSize layoutSize = image.size() / image.devicePixelRatio()
     The net effect of this is that the image is displayed as
-    high-dpi image rather than a large image.
+    high-DPI image rather than a large image
+    (see \l{Drawing High Resolution Versions of Pixmaps and Images}).
 
     \sa devicePixelRatio()
 */
@@ -1670,6 +1681,8 @@ void QImage::fill(uint pixel)
 #else
         pixel |= 0x000000ff;
 #endif
+    if (d->format == Format_BGR30 || d->format == Format_RGB30)
+        pixel |= 0xc0000000;
 
     qt_rectfill<uint>(reinterpret_cast<uint*>(d->data), pixel,
                       0, 0, d->width, d->height, d->bytes_per_line);
@@ -1736,6 +1749,14 @@ void QImage::fill(const QColor &color)
     case QImage::Format_RGBA8888_Premultiplied:
         fill(ARGB2RGBA(qPremultiply(color.rgba())));
         break;
+    case QImage::Format_BGR30:
+    case QImage::Format_A2BGR30_Premultiplied:
+        fill(qConvertArgb32ToA2rgb30<PixelOrderBGR>(color.rgba()));
+        break;
+    case QImage::Format_RGB30:
+    case QImage::Format_A2RGB30_Premultiplied:
+        fill(qConvertArgb32ToA2rgb30<PixelOrderRGB>(color.rgba()));
+        break;
     case QImage::Format_RGB16:
         fill((uint) qConvertRgb32To16(color.rgba()));
         break;
@@ -1779,6 +1800,9 @@ void QImage::fill(const QColor &color)
     is the case for a 1-bit image. Note that the color table is \e not
     changed.
 
+    If the image has a premultiplied alpha channel, the image is first
+    converted to ARGB32 to be inverted and then converted back.
+
     \sa {QImage#Image Transformations}{Image Transformations}
 */
 
@@ -1793,8 +1817,15 @@ void QImage::invertPixels(InvertMode mode)
     if (!d)
         return;
 
-    if (depth() != 32) {
-        // number of used bytes pr line
+    QImage::Format originalFormat = d->format;
+    // Inverting premultiplied pixels would produce invalid image data.
+    if (hasAlphaChannel() && qPixelLayouts[d->format].premultiplied) {
+        if (!d->convertInPlace(QImage::Format_ARGB32, 0))
+            *this = convertToFormat(QImage::Format_ARGB32);
+    }
+
+    if (depth() < 32) {
+        // This assumes no alpha-channel as the only formats with non-premultipled alpha are 32bit.
         int bpl = (d->width * d->depth + 7) / 8;
         int pad = d->bytes_per_line - bpl;
         uchar *sl = d->data;
@@ -1806,10 +1837,44 @@ void QImage::invertPixels(InvertMode mode)
     } else {
         quint32 *p = (quint32*)d->data;
         quint32 *end = (quint32*)(d->data + d->nbytes);
-        uint xorbits = (mode == InvertRgba) ? 0xffffffff : 0x00ffffff;
+        quint32 xorbits = 0xffffffff;
+        switch (d->format) {
+        case QImage::Format_RGBA8888:
+            if (mode == InvertRgba)
+                break;
+            // no break
+        case QImage::Format_RGBX8888:
+#if Q_BYTE_ORDER == Q_BIG_ENDIAN
+            xorbits = 0xffffff00;
+            break;
+#else
+            xorbits = 0x00ffffff;
+            break;
+#endif
+        case QImage::Format_ARGB32:
+            if (mode == InvertRgba)
+                break;
+            // no break
+        case QImage::Format_RGB32:
+            xorbits = 0x00ffffff;
+            break;
+        case QImage::Format_BGR30:
+        case QImage::Format_RGB30:
+            xorbits = 0x3fffffff;
+            break;
+        default:
+            Q_UNREACHABLE();
+            xorbits = 0;
+            break;
+        }
         while (p < end)
             *p++ ^= xorbits;
     }
+
+    if (originalFormat != d->format) {
+        if (!d->convertInPlace(originalFormat, 0))
+            *this = convertToFormat(originalFormat);
+    }
 }
 
 // Windows defines these
@@ -2142,6 +2207,12 @@ QRgb QImage::pixel(int x, int y) const
     case Format_RGBA8888: // Match ARGB32 behavior.
     case Format_RGBA8888_Premultiplied:
         return RGBA2ARGB(reinterpret_cast<const quint32 *>(s)[x]);
+    case Format_BGR30:
+    case Format_A2BGR30_Premultiplied:
+        return qConvertA2rgb30ToArgb32<PixelOrderBGR>(reinterpret_cast<const quint32 *>(s)[x]);
+    case Format_RGB30:
+    case Format_A2RGB30_Premultiplied:
+        return qConvertA2rgb30ToArgb32<PixelOrderRGB>(reinterpret_cast<const quint32 *>(s)[x]);
     case Format_RGB16:
         return qConvertRgb16To32(reinterpret_cast<const quint16 *>(s)[x]);
     default:
@@ -2232,6 +2303,18 @@ void QImage::setPixel(int x, int y, uint index_or_rgb)
     case Format_RGBA8888_Premultiplied:
         ((uint *)s)[x] = ARGB2RGBA(index_or_rgb);
         return;
+    case Format_BGR30:
+        ((uint *)s)[x] = qConvertRgb32ToRgb30<PixelOrderBGR>(index_or_rgb);
+        return;
+    case Format_A2BGR30_Premultiplied:
+        ((uint *)s)[x] = qConvertArgb32ToA2rgb30<PixelOrderBGR>(index_or_rgb);
+        return;
+    case Format_RGB30:
+        ((uint *)s)[x] = qConvertRgb32ToRgb30<PixelOrderRGB>(index_or_rgb);
+        return;
+    case Format_A2RGB30_Premultiplied:
+        ((uint *)s)[x] = qConvertArgb32ToA2rgb30<PixelOrderRGB>(index_or_rgb);
+        return;
     case Format_Invalid:
     case NImageFormats:
         Q_ASSERT(false);
@@ -2961,6 +3044,23 @@ QImage QImage::rgbSwapped_helper() const
             }
         }
         break;
+    case Format_BGR30:
+    case Format_A2BGR30_Premultiplied:
+    case Format_RGB30:
+    case Format_A2RGB30_Premultiplied:
+        res = QImage(d->width, d->height, d->format);
+        QIMAGE_SANITYCHECK_MEMORY(res);
+        for (int i = 0; i < d->height; i++) {
+            uint *q = (uint*)res.scanLine(i);
+            const uint *p = (const uint*)constScanLine(i);
+            const uint *end = p + d->width;
+            while (p < end) {
+                *q = qRgbSwapRgb30(*p);
+                p++;
+                q++;
+            }
+        }
+        break;
     default:
         res = QImage(d->width, d->height, d->format);
         rgbSwapped_generic(d->width, d->height, this, &res, &qPixelLayouts[d->format]);
@@ -3021,6 +3121,19 @@ void QImage::rgbSwapped_inplace()
             }
         }
         break;
+    case Format_BGR30:
+    case Format_A2BGR30_Premultiplied:
+    case Format_RGB30:
+    case Format_A2RGB30_Premultiplied:
+        for (int i = 0; i < d->height; i++) {
+            uint *p = (uint*)scanLine(i);
+            uint *end = p + d->width;
+            while (p < end) {
+                *p = qRgbSwapRgb30(*p);
+                p++;
+            }
+        }
+        break;
     default:
         rgbSwapped_generic(d->width, d->height, this, this, &qPixelLayouts[d->format]);
         break;
@@ -4038,20 +4151,16 @@ QImage QImage::alphaChannel() const
 */
 bool QImage::hasAlphaChannel() const
 {
-    return d && (d->format == Format_ARGB32_Premultiplied
-                 || d->format == Format_ARGB32
-                 || d->format == Format_ARGB8565_Premultiplied
-                 || d->format == Format_ARGB8555_Premultiplied
-                 || d->format == Format_ARGB6666_Premultiplied
-                 || d->format == Format_ARGB4444_Premultiplied
-                 || d->format == Format_RGBA8888
-                 || d->format == Format_RGBA8888_Premultiplied
-                 || (d->has_alpha_clut && (d->format == Format_Indexed8
-                                           || d->format == Format_Mono
-                                           || d->format == Format_MonoLSB)));
+    if (!d)
+        return false;
+    const QPixelFormat format = pixelFormat();
+    if (format.alphaUsage() == QPixelFormat::UsesAlpha)
+        return true;
+    if (format.colorModel() == QPixelFormat::Indexed)
+        return d->has_alpha_clut;
+    return false;
 }
 
-
 /*!
     \since 4.7
     Returns the number of bit planes in the image.
@@ -4071,6 +4180,10 @@ int QImage::bitPlaneCount() const
     switch (d->format) {
     case QImage::Format_Invalid:
         break;
+    case QImage::Format_BGR30:
+    case QImage::Format_RGB30:
+        bpc = 30;
+        break;
     case QImage::Format_RGB32:
     case QImage::Format_RGBX8888:
         bpc = 24;
@@ -4124,6 +4237,10 @@ static QImage rotated90(const QImage &image) {
     case QImage::Format_RGBX8888:
     case QImage::Format_RGBA8888:
     case QImage::Format_RGBA8888_Premultiplied:
+    case QImage::Format_BGR30:
+    case QImage::Format_A2BGR30_Premultiplied:
+    case QImage::Format_RGB30:
+    case QImage::Format_A2RGB30_Premultiplied:
         qt_memrotate270(reinterpret_cast<const quint32*>(image.bits()),
                         w, h, image.bytesPerLine(),
                         reinterpret_cast<quint32*>(out.bits()),
@@ -4186,6 +4303,10 @@ static QImage rotated270(const QImage &image) {
     case QImage::Format_RGBX8888:
     case QImage::Format_RGBA8888:
     case QImage::Format_RGBA8888_Premultiplied:
+    case QImage::Format_BGR30:
+    case QImage::Format_A2BGR30_Premultiplied:
+    case QImage::Format_RGB30:
+    case QImage::Format_A2RGB30_Premultiplied:
         qt_memrotate90(reinterpret_cast<const quint32*>(image.bits()),
                        w, h, image.bytesPerLine(),
                        reinterpret_cast<quint32*>(out.bits()),
@@ -4334,6 +4455,12 @@ QImage QImage::transformed(const QTransform &matrix, Qt::TransformationMode mode
             case QImage::Format_RGBX8888:
                 target_format = Format_RGBA8888_Premultiplied;
                 break;
+            case QImage::Format_BGR30:
+                target_format = Format_A2BGR30_Premultiplied;
+                break;
+            case QImage::Format_RGB30:
+                target_format = Format_A2RGB30_Premultiplied;
+                break;
             default:
                 target_format = Format_ARGB32_Premultiplied;
                 break;
@@ -4457,8 +4584,21 @@ bool QImageData::convertInPlace(QImage::Format newFormat, Qt::ImageConversionFla
 #ifndef QT_NO_DEBUG_STREAM
 QDebug operator<<(QDebug dbg, const QImage &i)
 {
-    dbg.nospace() << "QImage(" << i.size() << ')';
-    return dbg.space();
+    QDebugStateSaver saver(dbg);
+    dbg.resetFormat();
+    dbg.nospace();
+    dbg << "QImage(";
+    if (i.isNull()) {
+        dbg << "null";
+    } else {
+        dbg << i.size() << ",format=" << i.format() << ",depth=" << i.depth();
+        if (i.colorCount())
+            dbg << ",colorCount=" << i.colorCount();
+        dbg << ",devicePixelRatio=" << i.devicePixelRatio()
+            << ",bytesPerLine=" << i.bytesPerLine() << ",byteCount=" << i.byteCount();
+    }
+    dbg << ')';
+    return dbg;
 }
 #endif
 
@@ -4506,4 +4646,325 @@ QDebug operator<<(QDebug dbg, const QImage &i)
     \sa textKeys()
  */
 
+static Q_CONSTEXPR QPixelFormat pixelformats[] = {
+        //QImage::Format_Invalid:
+        QPixelFormat(),
+        //QImage::Format_Mono:
+        QPixelFormat(QPixelFormat::Indexed,
+                        /*RED*/            1,
+                        /*GREEN*/          0,
+                        /*BLUE*/           0,
+                        /*FOURTH*/         0,
+                        /*FIFTH*/          0,
+                        /*ALPHA*/          0,
+                        /*ALPHA USAGE*/    QPixelFormat::IgnoresAlpha,
+                        /*ALPHA POSITION*/ QPixelFormat::AtBeginning,
+                        /*PREMULTIPLIED*/  QPixelFormat::NotPremultiplied,
+                        /*INTERPRETATION*/ QPixelFormat::UnsignedByte,
+                        /*BYTE ORDER*/     QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_MonoLSB:
+        QPixelFormat(QPixelFormat::Indexed,
+                        /*RED*/            1,
+                        /*GREEN*/          0,
+                        /*BLUE*/           0,
+                        /*FOURTH*/         0,
+                        /*FIFTH*/          0,
+                        /*ALPHA*/          0,
+                        /*ALPHA USAGE*/    QPixelFormat::IgnoresAlpha,
+                        /*ALPHA POSITION*/ QPixelFormat::AtBeginning,
+                        /*PREMULTIPLIED*/  QPixelFormat::NotPremultiplied,
+                        /*INTERPRETATION*/ QPixelFormat::UnsignedByte,
+                        /*BYTE ORDER*/     QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_Indexed8:
+         QPixelFormat(QPixelFormat::Indexed,
+                        /*RED*/            8,
+                        /*GREEN*/          0,
+                        /*BLUE*/           0,
+                        /*FOURTH*/         0,
+                        /*FIFTH*/          0,
+                        /*ALPHA*/          0,
+                        /*ALPHA USAGE*/    QPixelFormat::IgnoresAlpha,
+                        /*ALPHA POSITION*/ QPixelFormat::AtBeginning,
+                        /*PREMULTIPLIED*/  QPixelFormat::NotPremultiplied,
+                        /*INTERPRETATION*/ QPixelFormat::UnsignedByte,
+                        /*BYTE ORDER*/     QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB32:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_ARGB32:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_ARGB32_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB16:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                5,
+                     /*GREEN*/              6,
+                     /*BLUE*/               5,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              0,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedShort,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_ARGB8565_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                5,
+                     /*GREEN*/              6,
+                     /*BLUE*/               5,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB666:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                6,
+                     /*GREEN*/              6,
+                     /*BLUE*/               6,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              0,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_ARGB6666_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                6,
+                     /*GREEN*/              6,
+                     /*BLUE*/               6,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              6,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtEnd,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB555:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                5,
+                     /*GREEN*/              5,
+                     /*BLUE*/               5,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              0,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedShort,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_ARGB8555_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                5,
+                     /*GREEN*/              5,
+                     /*BLUE*/               5,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB888:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              0,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB444:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                4,
+                     /*GREEN*/              4,
+                     /*BLUE*/               4,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              0,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedShort,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_ARGB4444_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                4,
+                     /*GREEN*/              4,
+                     /*BLUE*/               4,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              4,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtEnd,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedShort,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGBX8888:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtEnd,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedByte,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGBA8888:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtEnd,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedByte,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGBA8888_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                8,
+                     /*GREEN*/              8,
+                     /*BLUE*/               8,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              8,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtEnd,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedByte,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_BGR30:
+         QPixelFormat(QPixelFormat::BGR,
+                     /*RED*/                10,
+                     /*GREEN*/              10,
+                     /*BLUE*/               10,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              2,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_A2BGR30_Premultiplied:
+         QPixelFormat(QPixelFormat::BGR,
+                     /*RED*/                10,
+                     /*GREEN*/              10,
+                     /*BLUE*/               10,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              2,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_RGB30:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                10,
+                     /*GREEN*/              10,
+                     /*BLUE*/               10,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              2,
+                     /*ALPHA USAGE*/       QPixelFormat::IgnoresAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::NotPremultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+        //QImage::Format_A2RGB30_Premultiplied:
+         QPixelFormat(QPixelFormat::RGB,
+                     /*RED*/                10,
+                     /*GREEN*/              10,
+                     /*BLUE*/               10,
+                     /*FOURTH*/             0,
+                     /*FIFTH*/              0,
+                     /*ALPHA*/              2,
+                     /*ALPHA USAGE*/       QPixelFormat::UsesAlpha,
+                     /*ALPHA POSITION*/    QPixelFormat::AtBeginning,
+                     /*PREMULTIPLIED*/     QPixelFormat::Premultiplied,
+                     /*INTERPRETATION*/    QPixelFormat::UnsignedInteger,
+                     /*BYTE ORDER*/        QPixelFormat::CurrentSystemEndian),
+};
+Q_STATIC_ASSERT(sizeof(pixelformats) / sizeof(*pixelformats) == QImage::NImageFormats);
+
+/*!
+    Returns the QImage::Format as a QPixelFormat
+*/
+QPixelFormat QImage::pixelFormat() const Q_DECL_NOTHROW
+{
+    return toPixelFormat(format());
+}
+
+/*!
+    Converts \a format into a QPixelFormat
+*/
+QPixelFormat QImage::toPixelFormat(QImage::Format format) Q_DECL_NOTHROW
+{
+    Q_ASSERT(static_cast<int>(format) < NImageFormats);
+    return pixelformats[format];
+}
+
+/*!
+    Converts \a format into a QImage::Format
+*/
+QImage::Format QImage::toImageFormat(QPixelFormat format) Q_DECL_NOTHROW
+{
+    for (int i = 0; i < NImageFormats; i++) {
+        if (format == pixelformats[i])
+            return Format(i);
+    }
+    return Format_Invalid;
+}
+
 QT_END_NAMESPACE
diff --git a/src/gui/image/qimage.h b/src/gui/image/qimage.h
index 4326d5dbbc..55b8690c77 100644
--- a/src/gui/image/qimage.h
+++ b/src/gui/image/qimage.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,6 +37,7 @@
 #include <QtGui/qtransform.h>
 #include <QtGui/qpaintdevice.h>
 #include <QtGui/qrgb.h>
+#include <QtGui/qpixelformat.h>
 #include <QtCore/qbytearray.h>
 #include <QtCore/qrect.h>
 #include <QtCore/qstring.h>
@@ -123,6 +116,10 @@ public:
         Format_Grayscale2,
         Format_Grayscale2LSB
 #endif
+        Format_BGR30,
+        Format_A2BGR30_Premultiplied,
+        Format_RGB30,
+        Format_A2RGB30_Premultiplied,
 #ifndef Q_QDOC
         NImageFormats
 #endif
@@ -227,7 +224,7 @@ public:
     void setPixel(const QPoint &pt, uint index_or_rgb);
 
     QVector<QRgb> colorTable() const;
-    void setColorTable(const QVector<QRgb> colors);
+    void setColorTable(const QVector<QRgb> colors); // ### Qt 6: remove const
 
     qreal devicePixelRatio() const;
     void setDevicePixelRatio(qreal scaleFactor);
@@ -305,6 +302,10 @@ public:
     QString text(const QString &key = QString()) const;
     void setText(const QString &key, const QString &value);
 
+    QPixelFormat pixelFormat() const Q_DECL_NOTHROW;
+    static QPixelFormat toPixelFormat(QImage::Format format) Q_DECL_NOTHROW;
+    static QImage::Format toImageFormat(QPixelFormat format) Q_DECL_NOTHROW;
+
 #if QT_DEPRECATED_SINCE(5, 0)
     QT_DEPRECATED inline QString text(const char* key, const char* lang=0) const;
     QT_DEPRECATED inline QList<QImageTextKeyLang> textList() const;
diff --git a/src/gui/image/qimage_compat.cpp b/src/gui/image/qimage_compat.cpp
index 9acf5c18fa..7fdaf529c8 100644
--- a/src/gui/image/qimage_compat.cpp
+++ b/src/gui/image/qimage_compat.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qimage_conversions.cpp b/src/gui/image/qimage_conversions.cpp
index 66fe9ec3a8..bfa628900f 100644
--- a/src/gui/image/qimage_conversions.cpp
+++ b/src/gui/image/qimage_conversions.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -174,6 +166,35 @@ bool convert_generic_inplace(QImageData *data, QImage::Format dst_format, Qt::Im
     return true;
 }
 
+static void convert_passthrough(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = *src_data;
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+template<QImage::Format Format>
+static bool convert_passthrough_inplace(QImageData *data, Qt::ImageConversionFlags)
+{
+    data->format = Format;
+    return true;
+}
+
 static void convert_ARGB_to_ARGB_PM(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
 {
     Q_ASSERT(src->format == QImage::Format_ARGB32 || src->format == QImage::Format_RGBA8888);
@@ -406,6 +427,292 @@ static bool convert_RGBA_to_ARGB_PM_inplace(QImageData *data, Qt::ImageConversio
     return true;
 }
 
+template<QtPixelOrder PixelOrder>
+static void convert_RGB_to_RGB30(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+
+    Q_ASSERT(src->format == QImage::Format_RGB32 || src->format == QImage::Format_ARGB32);
+    Q_ASSERT(dest->format == QImage::Format_BGR30 ||  dest->format == QImage::Format_A2BGR30_Premultiplied
+             || dest->format == QImage::Format_RGB30 || dest->format == QImage::Format_A2RGB30_Premultiplied);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = qConvertRgb32ToRgb30<PixelOrder>(*src_data);
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+template<QtPixelOrder PixelOrder>
+static void convert_RGB30_to_RGB(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_BGR30 || src->format == QImage::Format_RGB30);
+    Q_ASSERT(dest->format == QImage::Format_RGB32 || dest->format == QImage::Format_ARGB32 || dest->format == QImage::Format_ARGB32_Premultiplied);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = qConvertA2rgb30ToArgb32<PixelOrder>(*src_data);
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+template<QtPixelOrder PixelOrder>
+static void convert_A2RGB30_PM_to_RGB(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_A2RGB30_Premultiplied || src->format == QImage::Format_A2BGR30_Premultiplied);
+    Q_ASSERT(dest->format == QImage::Format_RGB32);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = 0xff000000 | qUnpremultiply(qConvertA2rgb30ToArgb32<PixelOrder>(*src_data));
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+template<QtPixelOrder PixelOrder>
+static void convert_ARGB_PM_to_RGB30(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_ARGB32_Premultiplied);
+    Q_ASSERT(dest->format == QImage::Format_BGR30 || dest->format == QImage::Format_RGB30);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = qConvertRgb32ToRgb30<PixelOrder>(qUnpremultiply(*src_data));
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+template<QtPixelOrder PixelOrder>
+static void convert_ARGB_to_A2RGB30(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_ARGB32_Premultiplied);
+    Q_ASSERT(dest->format == QImage::Format_A2BGR30_Premultiplied || dest->format == QImage::Format_A2RGB30_Premultiplied);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = qConvertArgb32ToA2rgb30<PixelOrder>(*src_data);
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+template<QtPixelOrder PixelOrder>
+static void convert_A2RGB30_to_ARGB(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_A2BGR30_Premultiplied || src->format == QImage::Format_A2RGB30_Premultiplied);
+    Q_ASSERT(dest->format == QImage::Format_ARGB32_Premultiplied);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = qConvertA2rgb30ToArgb32<PixelOrder>(*src_data);
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+static inline uint qUnpremultiplyRgb30(uint rgb30)
+{
+    const uint a = rgb30 >> 30;
+    switch (a) {
+    case 0:
+        return 0;
+    case 1: {
+        uint rgb = rgb30 & 0x3fffffff;
+        rgb *= 3;
+        return (a << 30) | rgb;
+    }
+    case 2: {
+        uint rgb = rgb30 & 0x3fffffff;
+        rgb += rgb >> 1;
+        return (a << 30) | rgb;
+    }
+    case 3:
+        return rgb30;
+    }
+    Q_UNREACHABLE();
+    return 0;
+}
+
+static void convert_A2RGB30_PM_to_RGB30(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_A2RGB30_Premultiplied || src->format == QImage::Format_A2BGR30_Premultiplied);
+    Q_ASSERT(dest->format == QImage::Format_RGB30 || dest->format == QImage::Format_BGR30);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = 0xc0000000 | qUnpremultiplyRgb30(*src_data);
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+static bool convert_A2RGB30_PM_to_RGB30_inplace(QImageData *data, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(data->format == QImage::Format_A2RGB30_Premultiplied || data->format == QImage::Format_A2BGR30_Premultiplied);
+
+    const int pad = (data->bytes_per_line >> 2) - data->width;
+    uint *rgb_data = (uint *) data->data;
+
+    for (int i = 0; i < data->height; ++i) {
+        const uint *end = rgb_data + data->width;
+        while (rgb_data < end) {
+            *rgb_data = 0xc0000000 | qUnpremultiplyRgb30(*rgb_data);
+            ++rgb_data;
+        }
+        rgb_data += pad;
+    }
+
+    if (data->format == QImage::Format_A2RGB30_Premultiplied)
+        data->format = QImage::Format_RGB30;
+    else
+        data->format = QImage::Format_BGR30;
+    return true;
+}
+
+static void convert_BGR30_to_RGB30(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_RGB30 || src->format == QImage::Format_BGR30 ||
+             src->format == QImage::Format_A2RGB30_Premultiplied || src->format == QImage::Format_A2BGR30_Premultiplied);
+    Q_ASSERT(dest->format == QImage::Format_RGB30 || dest->format == QImage::Format_BGR30 ||
+             dest->format == QImage::Format_A2RGB30_Premultiplied || dest->format == QImage::Format_A2BGR30_Premultiplied);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const int src_pad = (src->bytes_per_line >> 2) - src->width;
+    const int dest_pad = (dest->bytes_per_line >> 2) - dest->width;
+    const quint32 *src_data = (quint32 *) src->data;
+    quint32 *dest_data = (quint32 *) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        const quint32 *end = src_data + src->width;
+        while (src_data < end) {
+            *dest_data = qRgbSwapRgb30(*src_data);
+            ++src_data;
+            ++dest_data;
+        }
+        src_data += src_pad;
+        dest_data += dest_pad;
+    }
+}
+
+static bool convert_BGR30_to_RGB30_inplace(QImageData *data, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(data->format == QImage::Format_RGB30 || data->format == QImage::Format_BGR30 ||
+             data->format == QImage::Format_A2RGB30_Premultiplied || data->format == QImage::Format_A2BGR30_Premultiplied);
+
+    const int pad = (data->bytes_per_line >> 2) - data->width;
+    uint *rgb_data = (uint *) data->data;
+
+    for (int i = 0; i < data->height; ++i) {
+        const uint *end = rgb_data + data->width;
+        while (rgb_data < end) {
+            *rgb_data = qRgbSwapRgb30(*rgb_data);
+            ++rgb_data;
+        }
+        rgb_data += pad;
+    }
+
+    switch (data->format) {
+    case QImage::Format_BGR30:
+        data->format = QImage::Format_RGB30;
+        break;
+    case QImage::Format_A2BGR30_Premultiplied:
+        data->format = QImage::Format_A2RGB30_Premultiplied;
+        break;
+    case QImage::Format_RGB30:
+        data->format = QImage::Format_BGR30;
+        break;
+    case QImage::Format_A2RGB30_Premultiplied:
+        data->format = QImage::Format_A2BGR30_Premultiplied;
+        break;
+    default:
+        Q_UNREACHABLE();
+        data->format = QImage::Format_Invalid;
+        return false;
+    }
+    return true;
+}
+
 static bool convert_indexed8_to_ARGB_PM_inplace(QImageData *data, Qt::ImageConversionFlags)
 {
     Q_ASSERT(data->format == QImage::Format_Indexed8);
@@ -1558,7 +1865,7 @@ static void convert_Mono_to_Indexed8(QImageData *dest, const QImageData *src, Qt
 Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormats] =
 {
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     },
     {
         0,
@@ -1579,7 +1886,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_Mono
 
     {
@@ -1601,7 +1908,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_MonoLSB
 
     {
@@ -1623,7 +1930,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_Indexed8
 
     {
@@ -1645,7 +1952,11 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         convert_RGB_to_RGBA,
         convert_RGB_to_RGBA,
-        convert_RGB_to_RGBA
+        convert_RGB_to_RGBA,
+        convert_RGB_to_RGB30<PixelOrderBGR>,
+        convert_RGB_to_RGB30<PixelOrderBGR>,
+        convert_RGB_to_RGB30<PixelOrderRGB>,
+        convert_RGB_to_RGB30<PixelOrderRGB>,
     }, // Format_RGB32
 
     {
@@ -1668,6 +1979,10 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         convert_ARGB_to_RGBx,
         convert_ARGB_to_RGBA,
         convert_ARGB_to_RGBA_PM,
+        convert_RGB_to_RGB30<PixelOrderBGR>,
+        0,
+        convert_RGB_to_RGB30<PixelOrderRGB>,
+        0,
     }, // Format_ARGB32
 
     {
@@ -1690,6 +2005,10 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         convert_ARGB_PM_to_RGBx,
         convert_ARGB_PM_to_RGBA,
         convert_ARGB_to_RGBA,
+        convert_ARGB_PM_to_RGB30<PixelOrderBGR>,
+        convert_ARGB_to_A2RGB30<PixelOrderBGR>,
+        convert_ARGB_PM_to_RGB30<PixelOrderRGB>,
+        convert_ARGB_to_A2RGB30<PixelOrderRGB>,
     },  // Format_ARGB32_Premultiplied
 
     {
@@ -1711,7 +2030,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_RGB16
 
     {
@@ -1733,7 +2052,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_ARGB8565_Premultiplied
 
     {
@@ -1755,7 +2074,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_RGB666
 
     {
@@ -1777,7 +2096,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_ARGB6666_Premultiplied
 
     {
@@ -1799,7 +2118,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_RGB555
 
     {
@@ -1821,7 +2140,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_ARGB8555_Premultiplied
 
     {
@@ -1843,7 +2162,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_RGB888
 
     {
@@ -1865,7 +2184,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_RGB444
 
     {
@@ -1886,7 +2205,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0,
         0,
-        0
+        0, 0, 0, 0, 0
     }, // Format_ARGB4444_Premultiplied
     {
         0,
@@ -1908,6 +2227,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         mask_alpha_converter_RGBx,
         mask_alpha_converter_RGBx,
+        0, 0, 0, 0
     }, // Format_RGBX8888
     {
         0,
@@ -1934,6 +2254,7 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0
 #endif
+        0, 0, 0, 0
     }, // Format_RGBA8888
 
     {
@@ -1962,19 +2283,121 @@ Image_Converter qimage_converter_map[QImage::NImageFormats][QImage::NImageFormat
         0,
         0
 #endif
-    } // Format_RGBA8888_Premultiplied
+        0, 0, 0, 0
+    }, // Format_RGBA8888_Premultiplied
+
+    {
+        0,
+        0,
+        0,
+        0,
+        convert_RGB30_to_RGB<PixelOrderBGR>,
+        convert_RGB30_to_RGB<PixelOrderBGR>,
+        convert_RGB30_to_RGB<PixelOrderBGR>,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_passthrough,
+        convert_BGR30_to_RGB30,
+        convert_BGR30_to_RGB30
+    }, // Format_BGR30
+    {
+        0,
+        0,
+        0,
+        0,
+        convert_A2RGB30_PM_to_RGB<PixelOrderBGR>,
+        0,
+        convert_A2RGB30_to_ARGB<PixelOrderBGR>,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_A2RGB30_PM_to_RGB30,
+        0,
+        0,
+        convert_BGR30_to_RGB30
+    }, // Format_BGR30A2_Premultiplied
+    {
+        0,
+        0,
+        0,
+        0,
+        convert_RGB30_to_RGB<PixelOrderRGB>,
+        convert_RGB30_to_RGB<PixelOrderRGB>,
+        convert_RGB30_to_RGB<PixelOrderRGB>,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_BGR30_to_RGB30,
+        convert_BGR30_to_RGB30,
+        0,
+        0,
+        convert_passthrough,
+    }, // Format_RGB30
+    {
+        0,
+        0,
+        0,
+        0,
+        convert_A2RGB30_PM_to_RGB<PixelOrderRGB>,
+        0,
+        convert_A2RGB30_to_ARGB<PixelOrderRGB>,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_BGR30_to_RGB30,
+        convert_A2RGB30_PM_to_RGB30,
+        0,
+    }, // Format_RGB30A2_Premultiplied
 };
 
 InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QImage::NImageFormats] =
 {
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     },
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_Mono
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_MonoLSB
     {
         0,
@@ -1995,7 +2418,7 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         0,
-        0,
+        0, 0, 0, 0, 0
     }, // Format_Indexed8
     {
         0,
@@ -2016,7 +2439,7 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         0,
-        0,
+        0, 0, 0, 0, 0
     }, // Format_RGB32
     {
         0,
@@ -2041,7 +2464,7 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         convert_ARGB_to_RGBA_inplace,
-        0,
+        0, 0, 0, 0, 0
     }, // Format_ARGB32
     {
         0,
@@ -2062,34 +2485,35 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         0,
-        convert_ARGB_to_RGBA_inplace
+        convert_ARGB_to_RGBA_inplace,
+        0, 0, 0, 0
     },  // Format_ARGB32_Premultiplied
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_RGB16
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_ARGB8565_Premultiplied
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_RGB666
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_ARGB6666_Premultiplied
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_RGB555
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_ARGB8555_Premultiplied
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_RGB888
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_RGB444
     {
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
     }, // Format_ARGB4444_Premultiplied
     {
         0,
@@ -2109,8 +2533,9 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         0,
-        0,
-        0,
+        convert_passthrough_inplace<QImage::Format_RGBA8888>,
+        convert_passthrough_inplace<QImage::Format_RGBA8888_Premultiplied>,
+        0, 0, 0, 0
     }, // Format_RGBX8888
     {
         0,
@@ -2132,6 +2557,7 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         0,
+        0, 0, 0, 0
     }, // Format_RGBA8888
     {
         0,
@@ -2153,7 +2579,108 @@ InPlace_Image_Converter qimage_inplace_converter_map[QImage::NImageFormats][QIma
         0,
         0,
         0,
-    }  // Format_RGBA8888_Premultiplied
+        0, 0, 0, 0
+    }, // Format_RGBA8888_Premultiplied
+    {
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_passthrough_inplace<QImage::Format_A2BGR30_Premultiplied>,
+        convert_BGR30_to_RGB30_inplace,
+        convert_BGR30_to_RGB30_inplace
+    }, // Format_BGR30
+    {
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_A2RGB30_PM_to_RGB30_inplace,
+        0,
+        0,
+        convert_BGR30_to_RGB30_inplace
+    }, // Format_BGR30A2_Premultiplied
+    {
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_BGR30_to_RGB30_inplace,
+        convert_BGR30_to_RGB30_inplace,
+        0,
+        convert_passthrough_inplace<QImage::Format_A2RGB30_Premultiplied>
+    }, // Format_RGB30
+    {
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        convert_BGR30_to_RGB30_inplace,
+        convert_A2RGB30_PM_to_RGB30_inplace,
+        0
+    }, // Format_RGB30A2_Premultiplied
 };
 
 void qInitImageConversions()
@@ -2175,9 +2702,15 @@ void qInitImageConversions()
 #endif
 
 #ifdef QT_COMPILER_SUPPORTS_MIPS_DSPR2
-    extern bool convert_ARGB_to_ARGB_PM_inplace_mips_dspr2(QImageData *data, Qt::ImageConversionFlags);
-    inplace_converter_map[QImage::Format_ARGB32][QImage::Format_ARGB32_Premultiplied] = convert_ARGB_to_ARGB_PM_inplace_mips_dspr2;
-    return;
+    if (qCpuHasFeature(DSPR2)) {
+        extern bool convert_ARGB_to_ARGB_PM_inplace_mips_dspr2(QImageData *data, Qt::ImageConversionFlags);
+        qimage_inplace_converter_map[QImage::Format_ARGB32][QImage::Format_ARGB32_Premultiplied] = convert_ARGB_to_ARGB_PM_inplace_mips_dspr2;
+
+        extern void convert_RGB888_to_RGB32_mips_dspr2(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags);
+        qimage_converter_map[QImage::Format_RGB888][QImage::Format_RGB32] = convert_RGB888_to_RGB32_mips_dspr2;
+        qimage_converter_map[QImage::Format_RGB888][QImage::Format_ARGB32] = convert_RGB888_to_RGB32_mips_dspr2;
+        qimage_converter_map[QImage::Format_RGB888][QImage::Format_ARGB32_Premultiplied] = convert_RGB888_to_RGB32_mips_dspr2;
+    }
 #endif
 }
 
diff --git a/src/gui/image/qimage_mips_dspr2.cpp b/src/gui/image/qimage_mips_dspr2.cpp
index a1c40a16df..7b16790e16 100644
--- a/src/gui/image/qimage_mips_dspr2.cpp
+++ b/src/gui/image/qimage_mips_dspr2.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,4 +58,24 @@ bool convert_ARGB_to_ARGB_PM_inplace_mips_dspr2(QImageData *data, Qt::ImageConve
     return true;
 }
 
+extern "C" void qt_convert_rgb888_to_rgb32_mips_dspr2_asm(uint *dst, const uchar *src, int len);
+
+void convert_RGB888_to_RGB32_mips_dspr2(QImageData *dest, const QImageData *src, Qt::ImageConversionFlags)
+{
+    Q_ASSERT(src->format == QImage::Format_RGB888);
+    Q_ASSERT(dest->format == QImage::Format_RGB32 || dest->format == QImage::Format_ARGB32 || dest->format == QImage::Format_ARGB32_Premultiplied);
+    Q_ASSERT(src->width == dest->width);
+    Q_ASSERT(src->height == dest->height);
+
+    const uchar *src_data = (const uchar*) src->data;
+    quint32 *dest_data = (quint32*) dest->data;
+
+    for (int i = 0; i < src->height; ++i) {
+        qt_convert_rgb888_to_rgb32_mips_dspr2_asm(dest_data, src_data, src->width);
+        src_data += src->bytes_per_line;
+        dest_data = (quint32*) ((uchar*) dest_data + dest->bytes_per_line);
+    }
+}
+
 QT_END_NAMESPACE
+
diff --git a/src/gui/image/qimage_mips_dspr2_asm.S b/src/gui/image/qimage_mips_dspr2_asm.S
index 1f03b72dd4..df626586dc 100644
--- a/src/gui/image/qimage_mips_dspr2_asm.S
+++ b/src/gui/image/qimage_mips_dspr2_asm.S
@@ -205,3 +205,95 @@ LEAF_MIPS_DSPR2(premultiply_argb_inplace_mips_asm)
 
 END(premultiply_argb_inplace_mips_asm)
 
+
+LEAF_MIPS_DSPR2(qt_convert_rgb888_to_rgb32_mips_dspr2_asm)
+/*
+ * Parameters:
+ *   a0 - dst *a8r8g8b8
+ *   a1 - src *r8g8b8
+ *   a2 - len
+ *
+ * R G B r  g b R G  B r g b  R G B r  g b . . .  -- input
+ * -------  -------  -------  -------  -------
+ * _ R G B  _ r g b  _ R G B  _ r g b  _ R G . .  -- output
+ *
+ * Register usage:
+ *   a2 - tail (len % 4) == (len & 0x3)
+ *   t0 - batches (len / 4) == (len >> 2)
+ *   t1-t7, s1-s3 - temporary
+ */
+
+    srl   t0, a2, 2     /* batches = len / 4 */
+    andi  a2, a2, 0x3   /* tail = len % 4 */
+
+    beqz  t0, 5f        /* if !batches: tail */
+     lui  t7, 0xff00    /* [FF 00 00 00] */
+    SAVE_REGS_ON_STACK 8, s1, s2, s3, s0, v0, v1
+
+1:  pref    4, 0 (a1)   /* hint: read-streamed */
+    pref    5, 0 (a0)   /* hint: prepare-write */
+    addiu  t0, t0, -1   /* batches-- */
+
+    lbu    t1,  0 (a1)  /* [__ __ __ R1] */
+    lbu    t2,  1 (a1)  /* [__ __ __ G1] */
+    lbu    t3,  2 (a1)  /* [__ __ __ B1] */
+
+    lbu    t4,  3 (a1)  /* [__ __ __ r2] */
+    lbu    t5,  4 (a1)  /* [__ __ __ g2] */
+    lbu    t6,  5 (a1)  /* [__ __ __ b2] */
+
+    lbu    s1,  6 (a1)  /* [__ __ __ R3] */
+    lbu    s2,  7 (a1)  /* [__ __ __ G3] */
+    lbu    s3,  8 (a1)  /* [__ __ __ B3] */
+
+    lbu    s0,  9 (a1)  /* [__ __ __ r4] */
+    lbu    v0, 10 (a1)  /* [__ __ __ g4] */
+    lbu    v1, 11 (a1)  /* [__ __ __ b4] */
+
+    append t1, t2, 8    /* [__ __ R1 G1] */
+    append t4, t5, 8    /* [__ __ r2 g2] */
+    append s1, s2, 8    /* [__ __ R3 G3] */
+    append s0, v0, 8    /* [__ __ r4 g4] */
+    append t1, t3, 8    /* [__ R1 G1 B1] */
+    append t4, t6, 8    /* [__ r2 g2 b2] */
+    append s1, s3, 8    /* [__ R3 G4 B3] */
+    append s0, v1, 8    /* [__ r4 g4 b4] */
+    or     t1, t1, t7   /* [FF R1 G1 B1] */
+    or     t4, t4, t7   /* [FF r2 g2 b2] */
+    or     s1, s1, t7   /* [FF R3 G3 B3] */
+    or     s0, s0, t7   /* [FF r4 g4 b4] */
+
+    sw     t1,  0 (a0)
+    sw     t4,  4 (a0)
+    sw     s1,  8 (a0)
+    sw     s0, 12 (a0)
+
+    addiu  a1, a1, 12   /* src += 4*3 */
+    bnez   t0, 1b       /* if batches: loop */
+     addiu a0, a0, 16   /* dst += 4 */
+
+    RESTORE_REGS_FROM_STACK 8, s1, s2, s3, s0, v0, v1
+
+    /* handle remaining "tail" (a2) items */
+5:  beqz   a2, 0f
+     lui   t0, 0xff00   /* [FF __ __ __] */
+
+1:  lbu    t1, 0 (a1)   /* [__ __ __ RR] */
+    lbu    t2, 1 (a1)   /* [__ __ __ GG] */
+    lbu    t3, 2 (a1)   /* [__ __ __ BB] */
+    sll    t1, t1, 16   /* [__ RR __ __] */
+    sll    t2, t2,  8   /* [__ __ GG __] */
+    or     t0, t0, t1   /* [FF RR __ __] */
+    or     t2, t2, t3   /* [__ __ GG BB] */
+    addi   a2, a2, -1   /* len--         */
+    or     t0, t0, t2   /* [FF RR GG BB] */
+    addiu  a1, a1,  3   /* src += 3      */
+    sw     t0, 0 (a0)
+    addiu  a0, a0,  4   /* dst++         */
+    bnez   a2, 1b       /* if tail: loop */
+     lui   t0, 0xff00   /* [FF __ __ __] */
+
+0:  jr ra
+     nop
+
+END(qt_convert_rgb888_to_rgb32_mips_dspr2_asm)
diff --git a/src/gui/image/qimage_neon.cpp b/src/gui/image/qimage_neon.cpp
index 60c2da6a58..e3930bbb4d 100644
--- a/src/gui/image/qimage_neon.cpp
+++ b/src/gui/image/qimage_neon.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qimage_p.h b/src/gui/image/qimage_p.h
index 81730b92f2..eec54ed4eb 100644
--- a/src/gui/image/qimage_p.h
+++ b/src/gui/image/qimage_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -130,7 +122,7 @@ inline int qt_depthForFormat(QImage::Format format)
     switch(format) {
     case QImage::Format_Invalid:
     case QImage::NImageFormats:
-        Q_ASSERT(false);
+        Q_UNREACHABLE();
     case QImage::Format_Mono:
     case QImage::Format_MonoLSB:
         depth = 1;
@@ -144,6 +136,10 @@ inline int qt_depthForFormat(QImage::Format format)
     case QImage::Format_RGBX8888:
     case QImage::Format_RGBA8888:
     case QImage::Format_RGBA8888_Premultiplied:
+    case QImage::Format_BGR30:
+    case QImage::Format_A2BGR30_Premultiplied:
+    case QImage::Format_RGB30:
+    case QImage::Format_A2RGB30_Premultiplied:
         depth = 32;
         break;
     case QImage::Format_RGB555:
diff --git a/src/gui/image/qimage_sse2.cpp b/src/gui/image/qimage_sse2.cpp
index 037846c9aa..84612e297d 100644
--- a/src/gui/image/qimage_sse2.cpp
+++ b/src/gui/image/qimage_sse2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qimage_ssse3.cpp b/src/gui/image/qimage_ssse3.cpp
index f50457c32a..24bdba3b36 100644
--- a/src/gui/image/qimage_ssse3.cpp
+++ b/src/gui/image/qimage_ssse3.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qimageiohandler.cpp b/src/gui/image/qimageiohandler.cpp
index d67b22c31e..1ecf445d57 100644
--- a/src/gui/image/qimageiohandler.cpp
+++ b/src/gui/image/qimageiohandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -157,6 +149,10 @@
 
     \value ImageFormat The image's data format returned by the handler.
     This can be any of the formats listed in QImage::Format.
+
+    \value SupportedSubTypes Image formats that support different saving
+    variants should return a list of supported variant names
+    (QList<QByteArray>) in this option.
 */
 
 /*!
diff --git a/src/gui/image/qimageiohandler.h b/src/gui/image/qimageiohandler.h
index 2ba99beab3..3b3c410e0c 100644
--- a/src/gui/image/qimageiohandler.h
+++ b/src/gui/image/qimageiohandler.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #ifndef QIMAGEIOHANDLER_H
 #define QIMAGEIOHANDLER_H
 
+#include <QtCore/qiodevice.h>
 #include <QtCore/qplugin.h>
 #include <QtCore/qfactoryinterface.h>
 #include <QtCore/qscopedpointer.h>
@@ -90,7 +83,8 @@ public:
         Endianness,
         Animation,
         BackgroundColor,
-        ImageFormat
+        ImageFormat,
+        SupportedSubTypes
     };
     virtual QVariant option(ImageOption option) const;
     virtual void setOption(ImageOption option, const QVariant &value);
diff --git a/src/gui/image/qimagepixmapcleanuphooks.cpp b/src/gui/image/qimagepixmapcleanuphooks.cpp
index 7e0c9797d9..9ed2f31f19 100644
--- a/src/gui/image/qimagepixmapcleanuphooks.cpp
+++ b/src/gui/image/qimagepixmapcleanuphooks.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qimagepixmapcleanuphooks_p.h b/src/gui/image/qimagepixmapcleanuphooks_p.h
index b48644b08d..58eb2a75a2 100644
--- a/src/gui/image/qimagepixmapcleanuphooks_p.h
+++ b/src/gui/image/qimagepixmapcleanuphooks_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qimagereader.cpp b/src/gui/image/qimagereader.cpp
index a10198a006..a1b9743209 100644
--- a/src/gui/image/qimagereader.cpp
+++ b/src/gui/image/qimagereader.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,17 +66,32 @@
     that occurred, or errorString() to get a human readable
     description of what went wrong.
 
+    \section1 Formats
+
     Call supportedImageFormats() for a list of formats that
     QImageReader can read. QImageReader supports all built-in image
     formats, in addition to any image format plugins that support
-    reading.
+    reading. Call supportedMimeTypes() to obtain a list of supported MIME
+    types, which for example can be passed to QFileDialog::setMimeTypeFilters().
 
     QImageReader autodetects the image format by default, by looking at the
     provided (optional) format string, the file name suffix, and the data
     stream contents. You can enable or disable this feature, by calling
     setAutoDetectImageFormat().
 
-    \sa QImageWriter, QImageIOHandler, QImageIOPlugin
+    \section1 High Resolution Versions of Images
+
+    It is possible to provide high resolution versions of images should a scaling
+    between \e{device pixels} and \e{device independent pixels} be in effect.
+
+    The high resolution version is marked by the suffix \c @2x on the base name.
+    The image read will have its \e{device pixel ratio} set to a value of 2.
+
+    This can be disabled by setting the environment variable
+    \c QT_HIGHDPI_DISABLE_2X_IMAGE_LOADING.
+
+    \sa QImageWriter, QImageIOHandler, QImageIOPlugin, QMimeDatabase
+    \sa QImage::devicePixelRatio(), QPixmap::devicePixelRatio(), QIcon, QPainter::drawPixmap(), QPainter::drawImage(), Qt::AA_UseHighDpiPixmaps
 */
 
 /*!
@@ -125,7 +132,6 @@
 #include <qimageiohandler.h>
 #include <qlist.h>
 #include <qrect.h>
-#include <qset.h>
 #include <qsize.h>
 #include <qcolor.h>
 #include <qvariant.h>
@@ -568,7 +574,7 @@ bool QImageReaderPrivate::initHandler()
     // check some preconditions
     if (!device || (!deleteDevice && !device->isOpen() && !device->open(QIODevice::ReadOnly))) {
         imageReaderError = QImageReader::DeviceError;
-        errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageReader, "Invalid device"));
+        errorString = QImageReader::tr("Invalid device");
         return false;
     }
 
@@ -595,7 +601,7 @@ bool QImageReaderPrivate::initHandler()
 
         if (!device->isOpen()) {
             imageReaderError = QImageReader::FileNotFoundError;
-            errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageReader, "File not found"));
+            errorString = QImageReader::tr("File not found");
             file->setFileName(fileName); // restore the old file name
             return false;
         }
@@ -604,7 +610,7 @@ bool QImageReaderPrivate::initHandler()
     // assign a handler
     if (!handler && (handler = createReadHandlerHelper(device, format, autoDetectImageFormat, ignoresFormatAndExtension)) == 0) {
         imageReaderError = QImageReader::UnsupportedFormatError;
-        errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageReader, "Unsupported image format"));
+        errorString = QImageReader::tr("Unsupported image format");
         return false;
     }
     return true;
@@ -1101,6 +1107,36 @@ bool QImageReader::supportsAnimation() const
 }
 
 /*!
+    \since 5.4
+
+    Returns the subtype of the image.
+*/
+QByteArray QImageReader::subType() const
+{
+    if (!d->initHandler())
+        return QByteArray();
+
+    if (d->handler->supportsOption(QImageIOHandler::SubType))
+        return d->handler->option(QImageIOHandler::SubType).toByteArray();
+    return QByteArray();
+}
+
+/*!
+    \since 5.4
+
+    Returns the list of subtypes supported by an image.
+*/
+QList<QByteArray> QImageReader::supportedSubTypes() const
+{
+    if (!d->initHandler())
+        return QList<QByteArray>();
+
+    if (!d->handler->supportsOption(QImageIOHandler::SupportedSubTypes))
+        return d->handler->option(QImageIOHandler::SupportedSubTypes).value< QList<QByteArray> >();
+    return QList<QByteArray>();
+}
+
+/*!
     Returns \c true if an image can be read for the device (i.e., the
     image format is supported, and the device seems to contain valid
     data); otherwise returns \c false.
@@ -1191,7 +1227,7 @@ bool QImageReader::read(QImage *image)
     // read the image
     if (!d->handler->read(image)) {
         d->imageReaderError = InvalidDataError;
-        d->errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageReader, "Unable to read image data"));
+        d->errorString = QImageReader::tr("Unable to read image data");
         return false;
     }
 
@@ -1384,7 +1420,7 @@ QImageReader::ImageReaderError QImageReader::error() const
 QString QImageReader::errorString() const
 {
     if (d->errorString.isEmpty())
-        return QLatin1String(QT_TRANSLATE_NOOP(QImageReader, "Unknown error"));
+        return QImageReader::tr("Unknown error");
     return d->errorString;
 }
 
@@ -1445,11 +1481,11 @@ QByteArray QImageReader::imageFormat(QIODevice *device)
 #ifndef QT_NO_IMAGEFORMATPLUGIN
 void supportedImageHandlerFormats(QFactoryLoader *loader,
                                   QImageIOPlugin::Capability cap,
-                                  QSet<QByteArray> *result);
+                                  QList<QByteArray> *result);
 
 void supportedImageHandlerMimeTypes(QFactoryLoader *loader,
                                   QImageIOPlugin::Capability cap,
-                                  QSet<QByteArray> *result);
+                                  QList<QByteArray> *result);
 #endif
 
 /*!
@@ -1482,7 +1518,7 @@ void supportedImageHandlerMimeTypes(QFactoryLoader *loader,
 
 QList<QByteArray> QImageReader::supportedImageFormats()
 {
-    QSet<QByteArray> formats;
+    QList<QByteArray> formats;
     for (int i = 0; i < _qt_NumFormats; ++i)
         formats << _qt_BuiltInFormats[i].extension;
 
@@ -1490,12 +1526,9 @@ QList<QByteArray> QImageReader::supportedImageFormats()
     supportedImageHandlerFormats(loader(), QImageIOPlugin::CanRead, &formats);
 #endif // QT_NO_IMAGEFORMATPLUGIN
 
-    QList<QByteArray> sortedFormats;
-    for (QSet<QByteArray>::ConstIterator it = formats.constBegin(); it != formats.constEnd(); ++it)
-        sortedFormats << *it;
-
-    std::sort(sortedFormats.begin(), sortedFormats.end());
-    return sortedFormats;
+    std::sort(formats.begin(), formats.end());
+    formats.erase(std::unique(formats.begin(), formats.end()), formats.end());
+    return formats;
 }
 
 /*!
@@ -1509,7 +1542,7 @@ QList<QByteArray> QImageReader::supportedImageFormats()
 
 QList<QByteArray> QImageReader::supportedMimeTypes()
 {
-    QSet<QByteArray> mimeTypes;
+    QList<QByteArray> mimeTypes;
     for (int i = 0; i < _qt_NumFormats; ++i)
         mimeTypes << _qt_BuiltInFormats[i].mimeType;
 
@@ -1517,12 +1550,9 @@ QList<QByteArray> QImageReader::supportedMimeTypes()
     supportedImageHandlerMimeTypes(loader(), QImageIOPlugin::CanRead, &mimeTypes);
 #endif // QT_NO_IMAGEFORMATPLUGIN
 
-    QList<QByteArray> sortedMimeTypes;
-    for (QSet<QByteArray>::ConstIterator it = mimeTypes.constBegin(); it != mimeTypes.constEnd(); ++it)
-        sortedMimeTypes << *it;
-
-    std::sort(sortedMimeTypes.begin(), sortedMimeTypes.end());
-    return sortedMimeTypes;
+    std::sort(mimeTypes.begin(), mimeTypes.end());
+    mimeTypes.erase(std::unique(mimeTypes.begin(), mimeTypes.end()), mimeTypes.end());
+    return mimeTypes;
 }
 
 QT_END_NAMESPACE
diff --git a/src/gui/image/qimagereader.h b/src/gui/image/qimagereader.h
index 4f3c93af7d..6686915e50 100644
--- a/src/gui/image/qimagereader.h
+++ b/src/gui/image/qimagereader.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #define QIMAGEREADER_H
 
 #include <QtCore/qbytearray.h>
+#include <QtCore/qcoreapplication.h>
 #include <QtGui/qimage.h>
 #include <QtGui/qimageiohandler.h>
 
@@ -58,6 +51,7 @@ class QStringList;
 class QImageReaderPrivate;
 class Q_GUI_EXPORT QImageReader
 {
+    Q_DECLARE_TR_FUNCTIONS(QImageReader)
 public:
     enum ImageReaderError {
         UnknownError,
@@ -111,6 +105,9 @@ public:
 
     bool supportsAnimation() const;
 
+    QByteArray subType() const;
+    QList<QByteArray> supportedSubTypes() const;
+
     bool canRead() const;
     QImage read();
     bool read(QImage *image);
diff --git a/src/gui/image/qimagewriter.cpp b/src/gui/image/qimagewriter.cpp
index c12dbb6544..d172d4008f 100644
--- a/src/gui/image/qimagewriter.cpp
+++ b/src/gui/image/qimagewriter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -259,6 +251,7 @@ public:
     float gamma;
     QString description;
     QString text;
+    QByteArray subType;
 
     // error
     QImageWriter::ImageWriterError imageWriterError;
@@ -279,7 +272,7 @@ QImageWriterPrivate::QImageWriterPrivate(QImageWriter *qq)
     compression = 0;
     gamma = 0.0;
     imageWriterError = QImageWriter::UnknownError;
-    errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageWriter, "Unknown error"));
+    errorString = QImageWriter::tr("Unknown error");
 
     q = qq;
 }
@@ -288,19 +281,19 @@ bool QImageWriterPrivate::canWriteHelper()
 {
     if (!device) {
         imageWriterError = QImageWriter::DeviceError;
-        errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageWriter, "Device is not set"));
+        errorString = QImageWriter::tr("Device is not set");
         return false;
     }
     if (!device->isOpen())
         device->open(QIODevice::WriteOnly);
     if (!device->isWritable()) {
         imageWriterError = QImageWriter::DeviceError;
-        errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageWriter, "Device not writable"));
+        errorString = QImageWriter::tr("Device not writable");
         return false;
     }
     if (!handler && (handler = createWriteHandlerHelper(device, format)) == 0) {
         imageWriterError = QImageWriter::UnsupportedFormatError;
-        errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageWriter, "Unsupported image format"));
+        errorString = QImageWriter::tr("Unsupported image format");
         return false;
     }
     return true;
@@ -518,6 +511,47 @@ float QImageWriter::gamma() const
 }
 
 /*!
+    \since 5.4
+
+    This is an image format specific function that sets the
+    subtype of the image to \a type. Subtype can be used by
+    a handler to determine which format it should use while
+    saving the image.
+
+    For example, saving an image in DDS format with A8R8G8R8 subtype:
+
+    \snippet code/src_gui_image_qimagewriter.cpp 3
+*/
+void QImageWriter::setSubType(const QByteArray &type)
+{
+    d->subType = type;
+}
+
+/*!
+    \since 5.4
+
+    Returns the subtype of the image.
+
+    \sa setSubType()
+*/
+QByteArray QImageWriter::subType() const
+{
+    return d->subType;
+}
+
+/*!
+    \since 5.4
+
+    Returns the list of subtypes supported by an image.
+*/
+QList<QByteArray> QImageWriter::supportedSubTypes() const
+{
+    if (!supportsOption(QImageIOHandler::SupportedSubTypes))
+        return QList<QByteArray>();
+    return d->handler->option(QImageIOHandler::SupportedSubTypes).value< QList<QByteArray> >();
+}
+
+/*!
     \obsolete
 
     Use setText() instead.
@@ -618,6 +652,8 @@ bool QImageWriter::write(const QImage &image)
         d->handler->setOption(QImageIOHandler::Gamma, d->gamma);
     if (!d->description.isEmpty() && d->handler->supportsOption(QImageIOHandler::Description))
         d->handler->setOption(QImageIOHandler::Description, d->description);
+    if (!d->subType.isEmpty() && d->handler->supportsOption(QImageIOHandler::SubType))
+        d->handler->setOption(QImageIOHandler::SubType, d->subType);
 
     if (!d->handler->write(image))
         return false;
@@ -667,7 +703,7 @@ bool QImageWriter::supportsOption(QImageIOHandler::ImageOption option) const
 {
     if (!d->handler && (d->handler = createWriteHandlerHelper(d->device, d->format)) == 0) {
         d->imageWriterError = QImageWriter::UnsupportedFormatError;
-        d->errorString = QLatin1String(QT_TRANSLATE_NOOP(QImageWriter, "Unsupported image format"));
+        d->errorString = QImageWriter::tr("Unsupported image format");
         return false;
     }
 
@@ -678,7 +714,7 @@ bool QImageWriter::supportsOption(QImageIOHandler::ImageOption option) const
 #ifndef QT_NO_IMAGEFORMATPLUGIN
 void supportedImageHandlerFormats(QFactoryLoader *loader,
                                   QImageIOPlugin::Capability cap,
-                                  QSet<QByteArray> *result)
+                                  QList<QByteArray> *result)
 {
     typedef QMultiMap<int, QString> PluginKeyMap;
     typedef PluginKeyMap::const_iterator PluginKeyMapConstIterator;
@@ -687,6 +723,7 @@ void supportedImageHandlerFormats(QFactoryLoader *loader,
     const PluginKeyMapConstIterator cend = keyMap.constEnd();
     int i = -1;
     QImageIOPlugin *plugin = 0;
+    result->reserve(result->size() + keyMap.size());
     for (PluginKeyMapConstIterator it = keyMap.constBegin(); it != cend; ++it) {
         if (it.key() != i) {
             i = it.key();
@@ -694,13 +731,13 @@ void supportedImageHandlerFormats(QFactoryLoader *loader,
         }
         const QByteArray key = it.value().toLatin1();
         if (plugin && (plugin->capabilities(0, key) & cap) != 0)
-            result->insert(key);
+            result->append(key);
     }
 }
 
 void supportedImageHandlerMimeTypes(QFactoryLoader *loader,
                                     QImageIOPlugin::Capability cap,
-                                    QSet<QByteArray> *result)
+                                    QList<QByteArray> *result)
 {
     QList<QJsonObject> metaDataList = loader->metaData();
 
@@ -713,7 +750,7 @@ void supportedImageHandlerMimeTypes(QFactoryLoader *loader,
         const int keyCount = keys.size();
         for (int k = 0; k < keyCount; ++k) {
             if (plugin && (plugin->capabilities(0, keys.at(k).toString().toLatin1()) & cap) != 0)
-                result->insert(mimeTypes.at(k).toString().toLatin1());
+                result->append(mimeTypes.at(k).toString().toLatin1());
         }
     }
 }
@@ -746,7 +783,7 @@ void supportedImageHandlerMimeTypes(QFactoryLoader *loader,
 */
 QList<QByteArray> QImageWriter::supportedImageFormats()
 {
-    QSet<QByteArray> formats;
+    QList<QByteArray> formats;
 #ifndef QT_NO_IMAGEFORMAT_BMP
     formats << "bmp";
 #endif
@@ -770,12 +807,9 @@ QList<QByteArray> QImageWriter::supportedImageFormats()
     supportedImageHandlerFormats(loader(), QImageIOPlugin::CanWrite, &formats);
 #endif // QT_NO_IMAGEFORMATPLUGIN
 
-    QList<QByteArray> sortedFormats;
-    for (QSet<QByteArray>::ConstIterator it = formats.constBegin(); it != formats.constEnd(); ++it)
-        sortedFormats << *it;
-
-    std::sort(sortedFormats.begin(), sortedFormats.end());
-    return sortedFormats;
+    std::sort(formats.begin(), formats.end());
+    formats.erase(std::unique(formats.begin(), formats.end()), formats.end());
+    return formats;
 }
 
 /*!
@@ -788,7 +822,7 @@ QList<QByteArray> QImageWriter::supportedImageFormats()
 */
 QList<QByteArray> QImageWriter::supportedMimeTypes()
 {
-    QSet<QByteArray> mimeTypes;
+    QList<QByteArray> mimeTypes;
 #ifndef QT_NO_IMAGEFORMAT_BMP
     mimeTypes << "image/bmp";
 #endif
@@ -814,12 +848,9 @@ QList<QByteArray> QImageWriter::supportedMimeTypes()
     supportedImageHandlerMimeTypes(loader(), QImageIOPlugin::CanWrite, &mimeTypes);
 #endif // QT_NO_IMAGEFORMATPLUGIN
 
-    QList<QByteArray> sortedMimeTypes;
-    for (QSet<QByteArray>::ConstIterator it = mimeTypes.constBegin(); it != mimeTypes.constEnd(); ++it)
-        sortedMimeTypes << *it;
-
-    std::sort(sortedMimeTypes.begin(), sortedMimeTypes.end());
-    return sortedMimeTypes;
+    std::sort(mimeTypes.begin(), mimeTypes.end());
+    mimeTypes.erase(std::unique(mimeTypes.begin(), mimeTypes.end()), mimeTypes.end());
+    return mimeTypes;
 }
 
 QT_END_NAMESPACE
diff --git a/src/gui/image/qimagewriter.h b/src/gui/image/qimagewriter.h
index 3f5cf9c454..f458a259aa 100644
--- a/src/gui/image/qimagewriter.h
+++ b/src/gui/image/qimagewriter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #define QIMAGEWRITER_H
 
 #include <QtCore/qbytearray.h>
+#include <QtCore/qcoreapplication.h>
 #include <QtCore/qlist.h>
 #include <QtGui/qimageiohandler.h>
 
@@ -55,6 +48,7 @@ class QImage;
 class QImageWriterPrivate;
 class Q_GUI_EXPORT QImageWriter
 {
+    Q_DECLARE_TR_FUNCTIONS(QImageWriter)
 public:
     enum ImageWriterError {
         UnknownError,
@@ -85,6 +79,10 @@ public:
     void setGamma(float gamma);
     float gamma() const;
 
+    void setSubType(const QByteArray &type);
+    QByteArray subType() const;
+    QList<QByteArray> supportedSubTypes() const;
+
     // Obsolete as of 4.1
     void setDescription(const QString &description);
     QString description() const;
diff --git a/src/gui/image/qjpeghandler.cpp b/src/gui/image/qjpeghandler.cpp
index 5008b1982b..481101db93 100644
--- a/src/gui/image/qjpeghandler.cpp
+++ b/src/gui/image/qjpeghandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -856,6 +848,7 @@ bool QJpegHandlerPrivate::read(QImage *image)
 
 Q_GUI_EXPORT void QT_FASTCALL qt_convert_rgb888_to_rgb32_neon(quint32 *dst, const uchar *src, int len);
 Q_GUI_EXPORT void QT_FASTCALL qt_convert_rgb888_to_rgb32_ssse3(quint32 *dst, const uchar *src, int len);
+extern "C" void qt_convert_rgb888_to_rgb32_mips_dspr2_asm(quint32 *dst, const uchar *src, int len);
 
 QJpegHandler::QJpegHandler()
     : d(new QJpegHandlerPrivate(this))
@@ -874,6 +867,11 @@ QJpegHandler::QJpegHandler()
         rgb888ToRgb32ConverterPtr = qt_convert_rgb888_to_rgb32_ssse3;
     }
 #endif // QT_COMPILER_SUPPORTS_SSSE3
+#if defined(QT_COMPILER_SUPPORTS_MIPS_DSPR2)
+    if (qCpuHasFeature(DSPR2)) {
+        rgb888ToRgb32ConverterPtr = qt_convert_rgb888_to_rgb32_mips_dspr2_asm;
+    }
+#endif // QT_COMPILER_SUPPORTS_DSPR2
 }
 
 QJpegHandler::~QJpegHandler()
diff --git a/src/gui/image/qjpeghandler_p.h b/src/gui/image/qjpeghandler_p.h
index 4342782f03..85b903bf44 100644
--- a/src/gui/image/qjpeghandler_p.h
+++ b/src/gui/image/qjpeghandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qmovie.cpp b/src/gui/image/qmovie.cpp
index 25d875ee11..8a90a2c25b 100644
--- a/src/gui/image/qmovie.cpp
+++ b/src/gui/image/qmovie.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qmovie.h b/src/gui/image/qmovie.h
index 94d7c79e7b..c1560fdab6 100644
--- a/src/gui/image/qmovie.h
+++ b/src/gui/image/qmovie.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qnativeimage.cpp b/src/gui/image/qnativeimage.cpp
index 356bdc09e4..ae60d80afb 100644
--- a/src/gui/image/qnativeimage.cpp
+++ b/src/gui/image/qnativeimage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qnativeimage_p.h b/src/gui/image/qnativeimage_p.h
index a7292e35dc..54dbe352f3 100644
--- a/src/gui/image/qnativeimage_p.h
+++ b/src/gui/image/qnativeimage_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpaintengine_pic.cpp b/src/gui/image/qpaintengine_pic.cpp
index 53e9a6cf1a..d450d82496 100644
--- a/src/gui/image/qpaintengine_pic.cpp
+++ b/src/gui/image/qpaintengine_pic.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpaintengine_pic_p.h b/src/gui/image/qpaintengine_pic_p.h
index 7623d59096..ef8b5643d1 100644
--- a/src/gui/image/qpaintengine_pic_p.h
+++ b/src/gui/image/qpaintengine_pic_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpicture.cpp b/src/gui/image/qpicture.cpp
index ec89b405b5..bb37461b4f 100644
--- a/src/gui/image/qpicture.cpp
+++ b/src/gui/image/qpicture.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -118,7 +110,7 @@ void qt_format_text(const QFont &fnt, const QRectF &_r,
 */
 
 const char  *qt_mfhdr_tag = "QPIC"; // header tag
-static const quint16 mfhdr_maj = 11; // major version #
+static const quint16 mfhdr_maj = QDataStream::Qt_DefaultCompiledVersion; // major version #
 static const quint16 mfhdr_min = 0; // minor version #
 
 /*!
diff --git a/src/gui/image/qpicture.h b/src/gui/image/qpicture.h
index 08445a3143..1ad20a4e70 100644
--- a/src/gui/image/qpicture.h
+++ b/src/gui/image/qpicture.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #ifndef QPICTURE_H
 #define QPICTURE_H
 
+#include <QtCore/qiodevice.h>
 #include <QtCore/qstringlist.h>
 #include <QtCore/qsharedpointer.h>
 #include <QtGui/qpaintdevice.h>
diff --git a/src/gui/image/qpicture_p.h b/src/gui/image/qpicture_p.h
index 893ed801f4..bc6ccdbe24 100644
--- a/src/gui/image/qpicture_p.h
+++ b/src/gui/image/qpicture_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpictureformatplugin.cpp b/src/gui/image/qpictureformatplugin.cpp
index 69c3d9ccec..4c7ad42b8f 100644
--- a/src/gui/image/qpictureformatplugin.cpp
+++ b/src/gui/image/qpictureformatplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpictureformatplugin.h b/src/gui/image/qpictureformatplugin.h
index 30989c084c..8bf5676c08 100644
--- a/src/gui/image/qpictureformatplugin.h
+++ b/src/gui/image/qpictureformatplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmap.cpp b/src/gui/image/qpixmap.cpp
index c6d8d19bb1..d4c0f264e8 100644
--- a/src/gui/image/qpixmap.cpp
+++ b/src/gui/image/qpixmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -648,14 +640,14 @@ void QPixmap::setMask(const QBitmap &mask)
 
 /*!
     Returns the device pixel ratio for the pixmap. This is the
-    ratio between pixmap pixels and device-independent pixels.
+    ratio between \e{device pixels} and \e{device independent pixels}.
 
     Use this function when calculating layout geometry based on
     the pixmap size: QSize layoutSize = image.size() / image.devicePixelRatio()
 
     The default value is 1.0.
 
-    \sa setDevicePixelRatio()
+    \sa setDevicePixelRatio(), QImageReader
 */
 qreal QPixmap::devicePixelRatio() const
 {
@@ -680,7 +672,8 @@ qreal QPixmap::devicePixelRatio() const
     pixmap size will take the ratio into account:
     QSize layoutSize = pixmap.size() / pixmap.devicePixelRatio()
     The net effect of this is that the pixmap is displayed as
-    high-dpi pixmap rather than a large pixmap.
+    high-DPI pixmap rather than a large pixmap
+    (see \l{Drawing High Resolution Versions of Pixmaps and Images}).
 
         \sa devicePixelRatio()
 */
@@ -1511,7 +1504,8 @@ QBitmap QPixmap::mask() const
         return QBitmap();
 
     const QImage img = toImage();
-    const QImage image = (img.depth() < 32 ? img.convertToFormat(QImage::Format_ARGB32_Premultiplied) : img);
+    bool shouldConvert = (img.format() != QImage::Format_ARGB32 && img.format() != QImage::Format_ARGB32_Premultiplied);
+    const QImage image = (shouldConvert ? img.convertToFormat(QImage::Format_ARGB32_Premultiplied) : img);
     const int w = image.width();
     const int h = image.height();
 
@@ -1723,8 +1717,19 @@ QPlatformPixmap* QPixmap::handle() const
 #ifndef QT_NO_DEBUG_STREAM
 QDebug operator<<(QDebug dbg, const QPixmap &r)
 {
-    dbg.nospace() << "QPixmap(" << r.size() << ')';
-    return dbg.space();
+    QDebugStateSaver saver(dbg);
+    dbg.resetFormat();
+    dbg.nospace();
+    dbg << "QPixmap(";
+    if (r.isNull()) {
+        dbg << "null";
+    } else {
+        dbg << r.size() << ",depth=" << r.depth()
+            << ",devicePixelRatio=" << r.devicePixelRatio()
+            << ",cacheKey=" << showbase << hex << r.cacheKey() << dec << noshowbase;
+    }
+    dbg << ')';
+    return dbg;
 }
 #endif
 
diff --git a/src/gui/image/qpixmap.h b/src/gui/image/qpixmap.h
index 0efd606283..dce64bd2dd 100644
--- a/src/gui/image/qpixmap.h
+++ b/src/gui/image/qpixmap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmap_blitter.cpp b/src/gui/image/qpixmap_blitter.cpp
index 2915cdda2d..0e911cd9aa 100644
--- a/src/gui/image/qpixmap_blitter.cpp
+++ b/src/gui/image/qpixmap_blitter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmap_blitter_p.h b/src/gui/image/qpixmap_blitter_p.h
index 481fb0bc24..ec6c1eb8e5 100644
--- a/src/gui/image/qpixmap_blitter_p.h
+++ b/src/gui/image/qpixmap_blitter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmap_raster.cpp b/src/gui/image/qpixmap_raster.cpp
index 639650dd89..65e7fb0096 100644
--- a/src/gui/image/qpixmap_raster.cpp
+++ b/src/gui/image/qpixmap_raster.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmap_raster_p.h b/src/gui/image/qpixmap_raster_p.h
index b273d65c9f..ffb4b591de 100644
--- a/src/gui/image/qpixmap_raster_p.h
+++ b/src/gui/image/qpixmap_raster_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmap_win.cpp b/src/gui/image/qpixmap_win.cpp
index 6cbb6fdb69..8cc840ccbd 100644
--- a/src/gui/image/qpixmap_win.cpp
+++ b/src/gui/image/qpixmap_win.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmapcache.cpp b/src/gui/image/qpixmapcache.cpp
index dbfe46a455..170a295cf8 100644
--- a/src/gui/image/qpixmapcache.cpp
+++ b/src/gui/image/qpixmapcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmapcache.h b/src/gui/image/qpixmapcache.h
index 83e6610f2a..ac8496614e 100644
--- a/src/gui/image/qpixmapcache.h
+++ b/src/gui/image/qpixmapcache.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpixmapcache_p.h b/src/gui/image/qpixmapcache_p.h
index 4247c8afd8..ec4ca43481 100644
--- a/src/gui/image/qpixmapcache_p.h
+++ b/src/gui/image/qpixmapcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qplatformpixmap.cpp b/src/gui/image/qplatformpixmap.cpp
index 54f0087bc2..15f83f2f7d 100644
--- a/src/gui/image/qplatformpixmap.cpp
+++ b/src/gui/image/qplatformpixmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qplatformpixmap.h b/src/gui/image/qplatformpixmap.h
index 435811eb84..a7d7629ea9 100644
--- a/src/gui/image/qplatformpixmap.h
+++ b/src/gui/image/qplatformpixmap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpnghandler.cpp b/src/gui/image/qpnghandler.cpp
index 3ee9e200de..17a0dd3eb9 100644
--- a/src/gui/image/qpnghandler.cpp
+++ b/src/gui/image/qpnghandler.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qpnghandler_p.h b/src/gui/image/qpnghandler_p.h
index 8bbb5df845..83e37eecaf 100644
--- a/src/gui/image/qpnghandler_p.h
+++ b/src/gui/image/qpnghandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qppmhandler.cpp b/src/gui/image/qppmhandler.cpp
index 39f63a620c..314abca9f0 100644
--- a/src/gui/image/qppmhandler.cpp
+++ b/src/gui/image/qppmhandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -265,27 +257,21 @@ static bool write_pbm_image(QIODevice *out, const QImage &sourceImage, const QBy
 
     if (format == "pbm") {
         image = image.convertToFormat(QImage::Format_Mono);
-    } else if (image.depth() == 1) {
-        image = image.convertToFormat(QImage::Format_Indexed8);
     } else {
         switch (image.format()) {
-        case QImage::Format_RGB16:
-        case QImage::Format_RGB666:
-        case QImage::Format_RGB555:
-        case QImage::Format_RGB888:
-        case QImage::Format_RGB444:
-        case QImage::Format_RGBX8888:
-            image = image.convertToFormat(QImage::Format_RGB32);
+        case QImage::Format_Mono:
+        case QImage::Format_MonoLSB:
+            image = image.convertToFormat(QImage::Format_Indexed8);
             break;
-        case QImage::Format_ARGB8565_Premultiplied:
-        case QImage::Format_ARGB6666_Premultiplied:
-        case QImage::Format_ARGB8555_Premultiplied:
-        case QImage::Format_ARGB4444_Premultiplied:
-        case QImage::Format_RGBA8888:
-        case QImage::Format_RGBA8888_Premultiplied:
-            image = image.convertToFormat(QImage::Format_ARGB32);
+        case QImage::Format_Indexed8:
+        case QImage::Format_RGB32:
+        case QImage::Format_ARGB32:
             break;
         default:
+            if (image.hasAlphaChannel())
+                image = image.convertToFormat(QImage::Format_ARGB32);
+            else
+                image = image.convertToFormat(QImage::Format_RGB32);
             break;
         }
     }
diff --git a/src/gui/image/qppmhandler_p.h b/src/gui/image/qppmhandler_p.h
index 711352c389..08a7a9d0be 100644
--- a/src/gui/image/qppmhandler_p.h
+++ b/src/gui/image/qppmhandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qxbmhandler.cpp b/src/gui/image/qxbmhandler.cpp
index 5311afd745..33e554d438 100644
--- a/src/gui/image/qxbmhandler.cpp
+++ b/src/gui/image/qxbmhandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qxbmhandler_p.h b/src/gui/image/qxbmhandler_p.h
index 3c037b4ede..a8db926415 100644
--- a/src/gui/image/qxbmhandler_p.h
+++ b/src/gui/image/qxbmhandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/image/qxpmhandler.cpp b/src/gui/image/qxpmhandler.cpp
index 5edb866b62..d9adcb5901 100644
--- a/src/gui/image/qxpmhandler.cpp
+++ b/src/gui/image/qxpmhandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1094,7 +1086,7 @@ static bool write_xpm_image(const QImage &sourceImage, QIODevice *device, const
         return false;
 
     QImage image;
-    if (sourceImage.format() != QImage::Format_RGB32 || sourceImage.format() != QImage::Format_ARGB32 || sourceImage.format() != QImage::Format_ARGB32_Premultiplied)
+    if (sourceImage.format() != QImage::Format_RGB32 && sourceImage.format() != QImage::Format_ARGB32 && sourceImage.format() != QImage::Format_ARGB32_Premultiplied)
         image = sourceImage.convertToFormat(QImage::Format_RGB32);
     else
         image = sourceImage;
diff --git a/src/gui/image/qxpmhandler_p.h b/src/gui/image/qxpmhandler_p.h
index 67a4c94a76..2ba6922ff9 100644
--- a/src/gui/image/qxpmhandler_p.h
+++ b/src/gui/image/qxpmhandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/itemmodels/qstandarditemmodel.cpp b/src/gui/itemmodels/qstandarditemmodel.cpp
index 7341c4c6f6..44ee710268 100644
--- a/src/gui/itemmodels/qstandarditemmodel.cpp
+++ b/src/gui/itemmodels/qstandarditemmodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/itemmodels/qstandarditemmodel.h b/src/gui/itemmodels/qstandarditemmodel.h
index f1820e1c80..8a71182bd6 100644
--- a/src/gui/itemmodels/qstandarditemmodel.h
+++ b/src/gui/itemmodels/qstandarditemmodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/itemmodels/qstandarditemmodel_p.h b/src/gui/itemmodels/qstandarditemmodel_p.h
index acbb823042..d95b6d1064 100644
--- a/src/gui/itemmodels/qstandarditemmodel_p.h
+++ b/src/gui/itemmodels/qstandarditemmodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/kernel.pri b/src/gui/kernel/kernel.pri
index e9e4a1d818..1169985ea8 100644
--- a/src/gui/kernel/kernel.pri
+++ b/src/gui/kernel/kernel.pri
@@ -66,13 +66,14 @@ HEADERS += \
         kernel/qplatformsharedgraphicscache.h \
         kernel/qplatformdialoghelper.h \
         kernel/qplatformservices.h \
-        kernel/qplatformscreenpageflipper.h \
         kernel/qplatformsystemtrayicon.h \
-        kernel/qplatformsessionmanager.h
+        kernel/qplatformsessionmanager.h \
+        kernel/qpixelformat.h \
+        kernel/qpaintdevicewindow.h \
+        kernel/qpaintdevicewindow_p.h \
+        kernel/qrasterwindow.h
 
 SOURCES += \
-        kernel/qclipboard_qpa.cpp \
-        kernel/qcursor_qpa.cpp \
         kernel/qgenericpluginfactory.cpp \
         kernel/qgenericplugin.cpp \
         kernel/qwindowsysteminterface.cpp \
@@ -109,7 +110,6 @@ SOURCES += \
         kernel/qinputmethod.cpp \
         kernel/qkeysequence.cpp \
         kernel/qkeymapper.cpp \
-        kernel/qkeymapper_qpa.cpp \
         kernel/qpalette.cpp \
         kernel/qguivariant.cpp \
         kernel/qscreen.cpp \
@@ -119,20 +119,24 @@ SOURCES += \
         kernel/qplatformsharedgraphicscache.cpp \
         kernel/qplatformdialoghelper.cpp \
         kernel/qplatformservices.cpp \
-        kernel/qplatformscreenpageflipper.cpp \
-        kernel/qplatformsystemtrayicon_qpa.cpp \
+        kernel/qplatformsystemtrayicon.cpp \
         kernel/qplatformsessionmanager.cpp \
-        kernel/qplatformmenu.cpp
+        kernel/qplatformmenu.cpp \
+        kernel/qpixelformat.cpp \
+        kernel/qpaintdevicewindow.cpp \
+        kernel/qrasterwindow.cpp
 
 contains(QT_CONFIG, opengl)|contains(QT_CONFIG, opengles2) {
     HEADERS += \
             kernel/qplatformopenglcontext.h \
             kernel/qopenglcontext.h \
-            kernel/qopenglcontext_p.h
+            kernel/qopenglcontext_p.h \
+            kernel/qopenglwindow.h
 
     SOURCES += \
             kernel/qplatformopenglcontext.cpp \
-            kernel/qopenglcontext.cpp
+            kernel/qopenglcontext.cpp \
+            kernel/qopenglwindow.cpp
 }
 
 win32:HEADERS+=kernel/qwindowdefs_win.h
diff --git a/src/gui/kernel/qclipboard.cpp b/src/gui/kernel/qclipboard.cpp
index 3c2d36ce86..ec9a8fdcf0 100644
--- a/src/gui/kernel/qclipboard.cpp
+++ b/src/gui/kernel/qclipboard.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,6 +42,10 @@
 #include "qimage.h"
 #include "qtextcodec.h"
 
+#include "private/qguiapplication_p.h"
+#include <qpa/qplatformintegration.h>
+#include <qpa/qplatformclipboard.h>
+
 QT_BEGIN_NAMESPACE
 
 /*!
@@ -438,6 +434,12 @@ void QClipboard::setPixmap(const QPixmap &pixmap, Mode mode)
 
     \sa setMimeData()
 */
+const QMimeData* QClipboard::mimeData(Mode mode) const
+{
+    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
+    if (!clipboard->supportsMode(mode)) return 0;
+    return clipboard->mimeData(mode);
+}
 
 /*!
     \fn void QClipboard::setMimeData(QMimeData *src, Mode mode)
@@ -458,6 +460,13 @@ void QClipboard::setPixmap(const QPixmap &pixmap, Mode mode)
 
     \sa mimeData()
 */
+void QClipboard::setMimeData(QMimeData* src, Mode mode)
+{
+    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
+    if (!clipboard->supportsMode(mode)) return;
+
+    clipboard->setMimeData(src,mode);
+}
 
 /*!
     \fn void QClipboard::clear(Mode mode)
@@ -472,7 +481,10 @@ void QClipboard::setPixmap(const QPixmap &pixmap, Mode mode)
 
     \sa QClipboard::Mode, supportsSelection()
 */
-
+void QClipboard::clear(Mode mode)
+{
+    setMimeData(0, mode);
+}
 
 /*!
     Returns \c true if the clipboard supports mouse selection; otherwise
@@ -527,6 +539,11 @@ bool QClipboard::ownsFindBuffer() const
     Returns \c true if the clipboard supports the clipboard mode speacified by \a mode;
     otherwise returns \c false.
 */
+bool QClipboard::supportsMode(Mode mode) const
+{
+    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
+    return clipboard->supportsMode(mode);
+}
 
 /*!
     \internal
@@ -534,6 +551,11 @@ bool QClipboard::ownsFindBuffer() const
     Returns \c true if the clipboard supports the clipboard data speacified by \a mode;
     otherwise returns \c false.
 */
+bool QClipboard::ownsMode(Mode mode) const
+{
+    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
+    return clipboard->ownsMode(mode);
+}
 
 /*!
     \internal
diff --git a/src/gui/kernel/qclipboard.h b/src/gui/kernel/qclipboard.h
index 7235a03b6b..3a5700518d 100644
--- a/src/gui/kernel/qclipboard.h
+++ b/src/gui/kernel/qclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qclipboard_qpa.cpp b/src/gui/kernel/qclipboard_qpa.cpp
deleted file mode 100644
index ff8a210cba..0000000000
--- a/src/gui/kernel/qclipboard_qpa.cpp
+++ /dev/null
@@ -1,89 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qclipboard.h"
-
-#ifndef QT_NO_CLIPBOARD
-
-#include "qmimedata.h"
-#include "private/qguiapplication_p.h"
-#include <qpa/qplatformclipboard.h>
-#include <qpa/qplatformintegration.h>
-
-QT_BEGIN_NAMESPACE
-
-QT_USE_NAMESPACE
-
-void QClipboard::clear(Mode mode)
-{
-    setMimeData(0, mode);
-}
-
-const QMimeData* QClipboard::mimeData(Mode mode) const
-{
-    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
-    if (!clipboard->supportsMode(mode)) return 0;
-    return clipboard->mimeData(mode);
-}
-
-void QClipboard::setMimeData(QMimeData* src, Mode mode)
-{
-    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
-    if (!clipboard->supportsMode(mode)) return;
-
-    clipboard->setMimeData(src,mode);
-}
-
-bool QClipboard::supportsMode(Mode mode) const
-{
-    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
-    return clipboard->supportsMode(mode);
-}
-
-bool QClipboard::ownsMode(Mode mode) const
-{
-    QPlatformClipboard *clipboard = QGuiApplicationPrivate::platformIntegration()->clipboard();
-    return clipboard->ownsMode(mode);
-}
-
-#endif // QT_NO_CLIPBOARD
-
-QT_END_NAMESPACE
diff --git a/src/gui/kernel/qcursor.cpp b/src/gui/kernel/qcursor.cpp
index a33b264704..235d2b3053 100644
--- a/src/gui/kernel/qcursor.cpp
+++ b/src/gui/kernel/qcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,9 @@
 #include <private/qcursor_p.h>
 #include <qdebug.h>
 
+#include <qpa/qplatformcursor.h>
+#include <private/qguiapplication_p.h>
+
 QT_BEGIN_NAMESPACE
 
 /*!
@@ -172,6 +167,13 @@ QT_BEGIN_NAMESPACE
 
     \sa setPos(), QWidget::mapFromGlobal(), QWidget::mapToGlobal()
 */
+QPoint QCursor::pos(const QScreen *screen)
+{
+    if (screen)
+        if (const QPlatformCursor *cursor = screen->handle()->cursor())
+            return cursor->pos();
+    return QGuiApplicationPrivate::lastCursorPosition.toPoint();
+}
 
 /*!
     \fn QPoint QCursor::pos()
@@ -191,7 +193,10 @@ QT_BEGIN_NAMESPACE
 
     \sa setPos(), QWidget::mapFromGlobal(), QWidget::mapToGlobal(), QGuiApplication::primaryScreen()
 */
-
+QPoint QCursor::pos()
+{
+    return QCursor::pos(QGuiApplication::primaryScreen());
+}
 
 /*!
     \fn void QCursor::setPos(QScreen *screen, int x, int y)
@@ -214,6 +219,19 @@ QT_BEGIN_NAMESPACE
 
     \sa pos(), QWidget::mapFromGlobal(), QWidget::mapToGlobal()
 */
+void QCursor::setPos(QScreen *screen, int x, int y)
+{
+    if (screen) {
+        if (QPlatformCursor *cursor = screen->handle()->cursor()) {
+            const QPoint pos = QPoint(x, y);
+            // Need to check, since some X servers generate null mouse move
+            // events, causing looping in applications which call setPos() on
+            // every mouse move event.
+            if (pos != cursor->pos())
+                cursor->setPos(pos);
+        }
+    }
+}
 
 /*!
     \fn void QCursor::setPos(int x, int y)
@@ -226,6 +244,10 @@ QT_BEGIN_NAMESPACE
 
     \sa pos(), QWidget::mapFromGlobal(), QWidget::mapToGlobal(), QGuiApplication::primaryScreen()
 */
+void QCursor::setPos(int x, int y)
+{
+    QCursor::setPos(QGuiApplication::primaryScreen(), x, y);
+}
 
 /*!
     \fn void QCursor::setPos (const QPoint &p)
@@ -401,34 +423,6 @@ QCursor::QCursor(const QBitmap &bitmap, const QBitmap &mask, int hotX, int hotY)
     d = QCursorData::setBitmap(bitmap, mask, hotX, hotY);
 }
 
-QCursorData *qt_cursorTable[Qt::LastCursor + 1];
-bool QCursorData::initialized = false;
-
-/*! \internal */
-void QCursorData::cleanup()
-{
-    if(!QCursorData::initialized)
-        return;
-
-    for (int shape = 0; shape <= Qt::LastCursor; ++shape) {
-        // In case someone has a static QCursor defined with this shape
-        if (!qt_cursorTable[shape]->ref.deref())
-            delete qt_cursorTable[shape];
-        qt_cursorTable[shape] = 0;
-    }
-    QCursorData::initialized = false;
-}
-
-/*! \internal */
-void QCursorData::initialize()
-{
-    if (QCursorData::initialized)
-        return;
-    for (int shape = 0; shape <= Qt::LastCursor; ++shape)
-        qt_cursorTable[shape] = new QCursorData((Qt::CursorShape)shape);
-    QCursorData::initialized = true;
-}
-
 /*!
     Constructs a cursor with the default arrow shape.
 */
@@ -602,6 +596,73 @@ QDebug operator<<(QDebug dbg, const QCursor &c)
 }
 #endif
 
+/*****************************************************************************
+  Internal QCursorData class
+ *****************************************************************************/
+
+QCursorData *qt_cursorTable[Qt::LastCursor + 1];
+bool QCursorData::initialized = false;
+
+QCursorData::QCursorData(Qt::CursorShape s)
+    : ref(1), cshape(s), bm(0), bmm(0), hx(0), hy(0)
+{
+}
+
+QCursorData::~QCursorData()
+{
+    delete bm;
+    delete bmm;
+}
+
+/*! \internal */
+void QCursorData::cleanup()
+{
+    if(!QCursorData::initialized)
+        return;
+
+    for (int shape = 0; shape <= Qt::LastCursor; ++shape) {
+        // In case someone has a static QCursor defined with this shape
+        if (!qt_cursorTable[shape]->ref.deref())
+            delete qt_cursorTable[shape];
+        qt_cursorTable[shape] = 0;
+    }
+    QCursorData::initialized = false;
+}
+
+/*! \internal */
+void QCursorData::initialize()
+{
+    if (QCursorData::initialized)
+        return;
+    for (int shape = 0; shape <= Qt::LastCursor; ++shape)
+        qt_cursorTable[shape] = new QCursorData((Qt::CursorShape)shape);
+    QCursorData::initialized = true;
+}
+
+QCursorData *QCursorData::setBitmap(const QBitmap &bitmap, const QBitmap &mask, int hotX, int hotY)
+{
+    if (!QCursorData::initialized)
+        QCursorData::initialize();
+    if (bitmap.depth() != 1 || mask.depth() != 1 || bitmap.size() != mask.size()) {
+        qWarning("QCursor: Cannot create bitmap cursor; invalid bitmap(s)");
+        QCursorData *c = qt_cursorTable[0];
+        c->ref.ref();
+        return c;
+    }
+    QCursorData *d = new QCursorData;
+    d->bm  = new QBitmap(bitmap);
+    d->bmm = new QBitmap(mask);
+    d->cshape = Qt::BitmapCursor;
+    d->hx = hotX >= 0 ? hotX : bitmap.width() / 2;
+    d->hy = hotY >= 0 ? hotY : bitmap.height() / 2;
+
+    return d;
+}
+
+void QCursorData::update()
+{
+}
+
 QT_END_NAMESPACE
 #endif // QT_NO_CURSOR
 
diff --git a/src/gui/kernel/qcursor.h b/src/gui/kernel/qcursor.h
index 0bf4cc7bf9..72c6a6504f 100644
--- a/src/gui/kernel/qcursor.h
+++ b/src/gui/kernel/qcursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qcursor_p.h b/src/gui/kernel/qcursor_p.h
index 2530f5ff4e..fe4c26b081 100644
--- a/src/gui/kernel/qcursor_p.h
+++ b/src/gui/kernel/qcursor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qcursor_qpa.cpp b/src/gui/kernel/qcursor_qpa.cpp
deleted file mode 100644
index 0b19a47c69..0000000000
--- a/src/gui/kernel/qcursor_qpa.cpp
+++ /dev/null
@@ -1,135 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <qcursor.h>
-#include <qscreen.h>
-#include <private/qcursor_p.h>
-#include <qpa/qplatformcursor.h>
-#include <private/qguiapplication_p.h>
-#include <qbitmap.h>
-
-QT_BEGIN_NAMESPACE
-
-QT_USE_NAMESPACE
-
-#ifndef QT_NO_CURSOR
-
-/*****************************************************************************
-  Internal QCursorData class
- *****************************************************************************/
-
-QCursorData::QCursorData(Qt::CursorShape s)
-    : ref(1), cshape(s), bm(0), bmm(0), hx(0), hy(0)
-{
-}
-
-QCursorData::~QCursorData()
-{
-    delete bm;
-    delete bmm;
-}
-
-
-/*****************************************************************************
-  Global cursors
- *****************************************************************************/
-
-extern QCursorData *qt_cursorTable[Qt::LastCursor + 1]; // qcursor.cpp
-
-QCursorData *QCursorData::setBitmap(const QBitmap &bitmap, const QBitmap &mask, int hotX, int hotY)
-{
-    if (!QCursorData::initialized)
-        QCursorData::initialize();
-    if (bitmap.depth() != 1 || mask.depth() != 1 || bitmap.size() != mask.size()) {
-        qWarning("QCursor: Cannot create bitmap cursor; invalid bitmap(s)");
-        QCursorData *c = qt_cursorTable[0];
-        c->ref.ref();
-        return c;
-    }
-    QCursorData *d = new QCursorData;
-    d->bm  = new QBitmap(bitmap);
-    d->bmm = new QBitmap(mask);
-    d->cshape = Qt::BitmapCursor;
-    d->hx = hotX >= 0 ? hotX : bitmap.width() / 2;
-    d->hy = hotY >= 0 ? hotY : bitmap.height() / 2;
-
-    return d;
-}
-
-void QCursorData::update()
-{
-}
-
-#endif //QT_NO_CURSOR
-
-QPoint QCursor::pos()
-{
-    return QCursor::pos(QGuiApplication::primaryScreen());
-}
-
-QPoint QCursor::pos(const QScreen *screen)
-{
-    if (screen)
-        if (const QPlatformCursor *cursor = screen->handle()->cursor())
-            return cursor->pos();
-    return QGuiApplicationPrivate::lastCursorPosition.toPoint();
-}
-
-void QCursor::setPos(QScreen *screen, int x, int y)
-{
-    if (screen) {
-        if (QPlatformCursor *cursor = screen->handle()->cursor()) {
-            const QPoint pos = QPoint(x, y);
-            // Need to check, since some X servers generate null mouse move
-            // events, causing looping in applications which call setPos() on
-            // every mouse move event.
-            if (pos != cursor->pos())
-                cursor->setPos(pos);
-        }
-    }
-}
-
-void QCursor::setPos(int x, int y)
-{
-    QCursor::setPos(QGuiApplication::primaryScreen(), x, y);
-}
-
-QT_END_NAMESPACE
diff --git a/src/gui/kernel/qdnd.cpp b/src/gui/kernel/qdnd.cpp
index d34a135eb7..f515fe18df 100644
--- a/src/gui/kernel/qdnd.cpp
+++ b/src/gui/kernel/qdnd.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -142,6 +134,7 @@ Qt::DropAction QDragManager::drag(QDrag *o)
     QGuiApplicationPrivate::instance()->notifyDragStarted(o);
     const Qt::DropAction result = m_platformDrag->drag(m_object);
     m_object = 0;
+    o->deleteLater();
     return result;
 }
 
diff --git a/src/gui/kernel/qdnd_p.h b/src/gui/kernel/qdnd_p.h
index d2d33852c2..573035ce24 100644
--- a/src/gui/kernel/qdnd_p.h
+++ b/src/gui/kernel/qdnd_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qdrag.cpp b/src/gui/kernel/qdrag.cpp
index d7fd4d5bc0..97913e0ddd 100644
--- a/src/gui/kernel/qdrag.cpp
+++ b/src/gui/kernel/qdrag.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qdrag.h b/src/gui/kernel/qdrag.h
index 553b0e1922..57d2519464 100644
--- a/src/gui/kernel/qdrag.h
+++ b/src/gui/kernel/qdrag.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qevent.cpp b/src/gui/kernel/qevent.cpp
index d6741af152..f99f28d6e0 100644
--- a/src/gui/kernel/qevent.cpp
+++ b/src/gui/kernel/qevent.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,6 +38,7 @@
 #include "qpa/qplatformdrag.h"
 #include "private/qevent_p.h"
 #include "qdebug.h"
+#include "qmetaobject.h"
 #include "qmimedata.h"
 #include "private/qdnd_p.h"
 #include "qevent_p.h"
@@ -287,6 +280,8 @@ QMouseEvent::~QMouseEvent()
   \l Qt::MouseEventNotSynthesized is returned always.
 
   \sa Qt::MouseEventSource
+  \sa QGraphicsSceneMouseEvent::source()
+  \sa QGraphicsSceneMouseEvent::setSource()
  */
 Qt::MouseEventSource QMouseEvent::source() const
 {
@@ -301,6 +296,8 @@ Qt::MouseEventSource QMouseEvent::source() const
      The mouse event flags provide additional information about a mouse event.
 
      \sa Qt::MouseEventFlag
+     \sa QGraphicsSceneMouseEvent::flags()
+     \sa QGraphicsSceneMouseEvent::setFlags()
  */
 Qt::MouseEventFlags QMouseEvent::flags() const
 {
@@ -637,6 +634,10 @@ QWheelEvent::QWheelEvent(const QPointF &pos, int delta,
     : QInputEvent(Wheel, modifiers), p(pos), qt4D(delta), qt4O(orient), mouseState(buttons)
 {
     g = QCursor::pos();
+    if (orient == Qt::Vertical)
+        angleD = QPoint(0, delta);
+    else
+        angleD = QPoint(delta, 0);
 }
 
 /*!
@@ -665,7 +666,12 @@ QWheelEvent::QWheelEvent(const QPointF &pos, const QPointF& globalPos, int delta
                          Qt::MouseButtons buttons, Qt::KeyboardModifiers modifiers,
                          Qt::Orientation orient)
     : QInputEvent(Wheel, modifiers), p(pos), g(globalPos), qt4D(delta), qt4O(orient), mouseState(buttons)
-{}
+{
+    if (orient == Qt::Vertical)
+        angleD = QPoint(0, delta);
+    else
+        angleD = QPoint(delta, 0);
+}
 
 /*!
     Constructs a wheel event object.
@@ -1185,7 +1191,7 @@ Qt::FocusReason QFocusEvent::reason() const
 
     The event contains a region() that needs to be updated, and a
     rect() that is the bounding rectangle of that region. Both are
-    provided because many widgets can't make much use of region(),
+    provided because many widgets cannot make much use of region(),
     and rect() can be much faster than region().boundingRect().
 
     \section1 Automatic Clipping
@@ -1302,7 +1308,8 @@ QMoveEvent::~QMoveEvent()
 */
 
 /*!
-    Constructs an expose event for the given \a exposeRegion.
+    Constructs an expose event for the given \a exposeRegion which must be
+    in local coordinates.
 */
 QExposeEvent::QExposeEvent(const QRegion &exposeRegion)
     : QEvent(Expose)
@@ -1320,7 +1327,7 @@ QExposeEvent::~QExposeEvent()
 /*!
     \fn const QRegion &QExposeEvent::region() const
 
-    Returns the window area that has been exposed.
+    Returns the window area that has been exposed. The region is given in local coordinates.
 */
 
 /*!
@@ -1977,40 +1984,63 @@ QVariant QInputMethodQueryEvent::value(Qt::InputMethodQuery query) const
 
     \ingroup events
 
-    Tablet Events are generated from a Wacom tablet. Most of the time you will
-    want to deal with events from the tablet as if they were events from a
-    mouse; for example, you would retrieve the cursor position with x(), y(),
-    pos(), globalX(), globalY(), and globalPos(). In some situations you may
-    wish to retrieve the extra information provided by the tablet device
-    driver; for example, you might want to do subpixeling with higher
-    resolution coordinates or you may want to adjust color brightness based on
-    pressure.  QTabletEvent allows you to read the pressure(), the xTilt(), and
-    yTilt(), as well as the type of device being used with device() (see
-    \l{TabletDevice}). It can also give you the minimum and maximum values for
-    each device's pressure and high resolution coordinates.
-
-    A tablet event contains a special accept flag that indicates whether the
-    receiver wants the event. You should call QTabletEvent::accept() if you
-    handle the tablet event; otherwise it will be sent to the parent widget.
-    The exception are TabletEnterProximity and TabletLeaveProximity events,
-    these are only sent to QApplication and don't check whether or not they are
-    accepted.
-
-    The QWidget::setEnabled() function can be used to enable or
-    disable mouse and keyboard events for a widget.
-
-    The event handler QWidget::tabletEvent() receives all three types of
-    tablet events. Qt will first send a tabletEvent then, if it is not
-    accepted, it will send a mouse event. This allows applications that
-    don't utilize tablets to use a tablet like a mouse, while also
-    enabling those who want to use both tablets and mouses differently.
+    \e{Tablet events} are generated from tablet peripherals such as Wacom
+    tablets and various other brands, and electromagnetic stylus devices
+    included with some types of tablet computers. (It is not the same as
+    \l QTouchEvent which a touchscreen generates, even when a passive stylus is
+    used on a touchscreen.)
+
+    Tablet events are similar to mouse events; for example, the \l x(), \l y(),
+    \l pos(), \l globalX(), \l globalY(), and \l globalPos() accessors provide
+    the cursor position, and you can see which \l buttons() are pressed
+    (pressing the stylus tip against the tablet surface is equivalent to a left
+    mouse button). But tablet events also pass through some extra information
+    that the tablet device driver provides; for example, you might want to do
+    subpixel rendering with higher resolution coordinates (\l hiResGlobalX()
+    and \l hiResGlobalY()), adjust color brightness based on the \l pressure()
+    of the tool against the tablet surface, use different brushes depending on
+    the type of tool in use (\l device()), modulate the brush shape in some way
+    according to the X-axis and Y-axis tilt of the tool with respect to the
+    tablet surface (\l xTilt() and \l yTilt()), and use a virtual eraser
+    instead of a brush if the user switches to the other end of a double-ended
+    stylus (\l pointerType()).
+
+    Every event contains an accept flag that indicates whether the receiver
+    wants the event. You should call QTabletEvent::accept() if you handle the
+    tablet event; otherwise it will be sent to the parent widget. The exception
+    are TabletEnterProximity and TabletLeaveProximity events: these are only
+    sent to QApplication and do not check whether or not they are accepted.
+
+    The QWidget::setEnabled() function can be used to enable or disable
+    mouse, tablet and keyboard events for a widget.
+
+    The event handler QWidget::tabletEvent() receives TabletPress,
+    TabletRelease and TabletMove events. Qt will first send a
+    tablet event, then if it is not accepted by any widget, it will send a
+    mouse event. This allows users of applications that are not designed for
+    tablets to use a tablet like a mouse. However high-resolution drawing
+    applications should handle the tablet events, because they can occur at a
+    higher frequency, which is a benefit for smooth and accurate drawing.
+    If the tablet events are rejected, the synthetic mouse events may be
+    compressed for efficiency.
+
+    New in Qt 5.4: QTabletEvent includes all information available from the
+    device, including \l QTabletEvent::buttons(). Previously it was not
+    possible to accept all tablet events and also know which stylus buttons
+    were pressed.
+
+    Note that pressing the stylus button while the stylus hovers over the
+    tablet will generate a button press on some types of tablets, while on
+    other types it will be necessary to press the stylus against the tablet
+    surface in order to register the simultaneous stylus button press.
 
     \section1 Notes for X11 Users
 
-    Qt uses the following hard-coded names to identify tablet
-    devices from the xorg.conf file on X11 (apart from IRIX):
-    'stylus', 'pen', and 'eraser'. If the devices have other names,
-    they will not be picked up Qt.
+    If the tablet is configured in xorg.conf to use the Wacom driver, there
+    will be separate XInput "devices" for the stylus, eraser, and (optionally)
+    cursor and touchpad. Qt recognizes these by their names. Otherwise, if the
+    tablet is configured to use the evdev driver, there will be only one device
+    and applications may not be able to distinguish the stylus from the eraser.
 */
 
 /*!
@@ -2068,11 +2098,73 @@ QVariant QInputMethodQueryEvent::value(Qt::InputMethodQuery query) const
   The \a tangentialPressure parameter contins the tangential pressure of an air
   brush. If the device does not support tangential pressure, pass 0 here.
 
+  \a rotation contains the device's rotation in degrees. 4D mice and the Wacom
+  Art Pen support rotation. If the device does not support rotation, pass 0 here.
+
+  The \a button that caused the event is given as a value from the
+  \l Qt::MouseButton enum. If the event \a type is not \l TabletPress or
+  \l TabletRelease, the appropriate button for this event is \l Qt::NoButton.
+
+  \a buttons is the state of all buttons at the time of the event.
+
+  \sa pos(), globalPos(), device(), pressure(), xTilt(), yTilt(), uniqueId(), rotation(),
+      tangentialPressure(), z()
+*/
+
+QTabletEvent::QTabletEvent(Type type, const QPointF &pos, const QPointF &globalPos,
+                           int device, int pointerType,
+                           qreal pressure, int xTilt, int yTilt, qreal tangentialPressure,
+                           qreal rotation, int z, Qt::KeyboardModifiers keyState, qint64 uniqueID,
+                           Qt::MouseButton button, Qt::MouseButtons buttons)
+    : QInputEvent(type, keyState),
+      mPos(pos),
+      mGPos(globalPos),
+      mDev(device),
+      mPointerType(pointerType),
+      mXT(xTilt),
+      mYT(yTilt),
+      mZ(z),
+      mPress(pressure),
+      mTangential(tangentialPressure),
+      mRot(rotation),
+      mUnique(uniqueID),
+      mExtra(new QTabletEventPrivate(button, buttons))
+{
+}
+
+/*!
+  Construct a tablet event of the given \a type.
+
+  The \a pos parameter indicates where the event occurred in the
+  widget; \a globalPos is the corresponding position in absolute
+  coordinates.
+
+  \a pressure contains the pressure exerted on the \a device.
+
+  \a pointerType describes the type of pen that is being used.
+
+  \a xTilt and \a yTilt contain the device's degree of tilt from the
+  x and y axes respectively.
+
+  \a keyState specifies which keyboard modifiers are pressed (e.g.,
+  \uicontrol{Ctrl}).
+
+  The \a uniqueID parameter contains the unique ID for the current device.
+
+  The \a z parameter contains the coordinate of the device on the tablet, this
+  is usually given by a wheel on 4D mouse. If the device does not support a
+  Z-axis, pass zero here.
+
+  The \a tangentialPressure parameter contins the tangential pressure of an air
+  brush. If the device does not support tangential pressure, pass 0 here.
+
   \a rotation contains the device's rotation in degrees. 4D mice support
   rotation. If the device does not support rotation, pass 0 here.
 
   \sa pos(), globalPos(), device(), pressure(), xTilt(), yTilt(), uniqueId(), rotation(),
       tangentialPressure(), z()
+
+  \deprecated in 5.4: use the constructor with MouseButton status
 */
 
 QTabletEvent::QTabletEvent(Type type, const QPointF &pos, const QPointF &globalPos,
@@ -2091,7 +2183,7 @@ QTabletEvent::QTabletEvent(Type type, const QPointF &pos, const QPointF &globalP
       mTangential(tangentialPressure),
       mRot(rotation),
       mUnique(uniqueID),
-      mExtra(0)
+      mExtra(new QTabletEventPrivate(Qt::NoButton, Qt::NoButton))
 {
 }
 
@@ -2103,6 +2195,34 @@ QTabletEvent::~QTabletEvent()
 }
 
 /*!
+    Returns the button that caused the event.
+
+    Note that the returned value is always Qt::NoButton for \l TabletMove,
+    \l TabletEnterProximity and \l TabletLeaveProximity events.
+
+    \sa buttons(), Qt::MouseButton
+*/
+Qt::MouseButton QTabletEvent::button() const
+{
+    return static_cast<QTabletEventPrivate *>(mExtra)->b;
+}
+
+/*!
+    Returns the button state when the event was generated. The button state is
+    a combination of buttons from the \l Qt::MouseButton enum using the OR
+    operator. For \l TabletMove events, this is all buttons that are pressed
+    down. For \l TabletPress events this includes the button that caused the
+    event. For \l TabletRelease events this excludes the button that caused the
+    event.
+
+    \sa button(), Qt::MouseButton
+*/
+Qt::MouseButtons QTabletEvent::buttons() const
+{
+    return static_cast<QTabletEventPrivate *>(mExtra)->buttonState;
+}
+
+/*!
     \fn TabletDevices QTabletEvent::device() const
 
     Returns the type of device that generated the event.
@@ -2132,7 +2252,7 @@ QTabletEvent::~QTabletEvent()
     \fn qreal QTabletEvent::rotation() const
 
     Returns the rotation of the current device in degress. This is usually
-    given by a 4D Mouse. If the device doesn't support rotation this value is
+    given by a 4D Mouse. If the device does not support rotation this value is
     always 0.0.
 
 */
@@ -3036,7 +3156,7 @@ QActionEvent::~QActionEvent()
     If spontaneous() is true, the event originated outside the
     application. In this case, the user hid the window using the
     window manager controls, either by iconifying the window or by
-    switching to another virtual desktop where the window isn't
+    switching to another virtual desktop where the window is not
     visible. The window will become hidden but not withdrawn. If the
     window was iconified, QWidget::isMinimized() returns \c true.
 
@@ -3237,330 +3357,470 @@ QShortcutEvent::~QShortcutEvent()
 
 #ifndef QT_NO_DEBUG_STREAM
 
+static inline void formatTouchPoint(QDebug d, const QTouchEvent::TouchPoint &tp)
+{
+    d << "TouchPoint(" << tp.id() << ' ' << tp.rect();
+    switch (tp.state()) {
+    case Qt::TouchPointPressed:
+        d << " pressed";
+        break;
+    case Qt::TouchPointReleased:
+        d << " released";
+        break;
+    case Qt::TouchPointMoved:
+        d << " moved";
+        break;
+    case Qt::TouchPointStationary:
+        d << " stationary";
+        break;
+    }
+    d << ')';
+}
+
 static inline void formatTouchEvent(QDebug d, const char *name, const QTouchEvent &t)
 {
     d << "QTouchEvent(" << name << " states: " <<  t.touchPointStates();
-    const QList<QTouchEvent::TouchPoint> points = t.touchPoints();
-    const int size = points.size();
-    d << ", " << size << " points: ";
-    for (int i = 0; i < size; ++i) {
+    d << ", " << t.touchPoints().size() << " points: " << t.touchPoints() << ')';
+}
+
+static void formatUnicodeString(QDebug d, const QString &s)
+{
+    d << '"' << hex;
+    for (int i = 0; i < s.size(); ++i) {
         if (i)
-            d << ", ";
-        d << points.at(i).pos() << ' ' << points.at(i).rect();
-        switch (points.at(i).state()) {
-        case Qt::TouchPointPressed:
-            d << " pressed";
-            break;
-        case Qt::TouchPointReleased:
-            d << " released";
-            break;
-        case Qt::TouchPointMoved:
-            d << " moved";
-            break;
-        case Qt::TouchPointStationary:
-            d << " stationary";
-            break;
+            d << ',';
+        d << "U+" << s.at(i).unicode();
+    }
+    d << dec << '"';
+}
+
+static inline void formatInputMethodEvent(QDebug d, const QInputMethodEvent *e)
+{
+    d << "QInputMethodEvent(";
+    if (!e->preeditString().isEmpty()) {
+        d << "preedit=";
+        formatUnicodeString(d, e->preeditString());
+    }
+    if (!e->commitString().isEmpty()) {
+        d << ", commit=";
+        formatUnicodeString(d, e->commitString());
+    }
+    if (e->replacementLength()) {
+        d << ", replacementStart=" << e->replacementStart() << ", replacementLength="
+          << e->replacementLength();
+    }
+    if (const int attributeCount = e->attributes().size()) {
+        d << ", attributes= {";
+        for (int a = 0; a < attributeCount; ++a) {
+            const QInputMethodEvent::Attribute &at = e->attributes().at(a);
+            if (a)
+                d << ',';
+            d << "[type= " << at.type << ", start=" << at.start << ", length=" << at.length
+              << ", value=" << at.value << ']';
         }
+        d << '}';
     }
     d << ')';
 }
 
-QDebug operator<<(QDebug dbg, const QEvent *e) {
-    // More useful event output could be added here
-    if (!e)
-        return dbg << "QEvent(this = 0x0)";
-    const char *n = 0;
-    switch (e->type()) {
-    case QEvent::Timer:
-        n = "Timer";
-        break;
-    case QEvent::MouseButtonPress:
-    case QEvent::MouseMove:
-    case QEvent::MouseButtonRelease:
-    case QEvent::MouseButtonDblClick:
-    {
-        const QMouseEvent *me = static_cast<const QMouseEvent*>(e);
-        switch(me->type()) {
-        case QEvent::MouseButtonPress:
-            n = "MouseButtonPress";
-            break;
-        case QEvent::MouseMove:
-            n = "MouseMove";
-            break;
-        case QEvent::MouseButtonRelease:
-            n = "MouseButtonRelease";
-            break;
-        case QEvent::MouseButtonDblClick:
-        default:
-            n = "MouseButtonDblClick";
-            break;
+static inline void formatInputMethodQueryEvent(QDebug d, const QInputMethodQueryEvent *e)
+{
+    const Qt::InputMethodQueries queries = e->queries();
+    d << "QInputMethodQueryEvent(queries=" << showbase << hex << int(queries)
+      << noshowbase << dec << ", {";
+    for (unsigned mask = 1; mask <= Qt::ImTextAfterCursor; mask<<=1) {
+        if (queries & mask) {
+            const QVariant value = e->value(static_cast<Qt::InputMethodQuery>(mask));
+            if (value.isValid())
+                d << '[' << showbase << hex << mask <<  noshowbase << dec << '=' << value << "],";
         }
-        QDebug nsp = dbg.nospace();
-        nsp << "QMouseEvent("  << n
-                      << ", " << me->button()
-                      << ", " << hex << (int)me->buttons()
-                      << ", " << hex << (int)me->modifiers() << dec;
-        if (const Qt::MouseEventSource source = me->source())
-            nsp << ", source = " << source;
-        nsp << ')';
     }
-    return dbg.space();
+    d << "})";
+}
 
-#ifndef QT_NO_TOOLTIP
-    case QEvent::ToolTip:
-        n = "ToolTip";
-        break;
-#endif
-    case QEvent::WindowActivate:
-        n = "WindowActivate";
-        break;
-    case QEvent::WindowDeactivate:
-        n = "WindowDeactivate";
-        break;
-    case QEvent::ActivationChange:
-        n = "ActivationChange";
-        break;
-#ifndef QT_NO_WHEELEVENT
-    case QEvent::Wheel:
-        dbg.nospace() << "QWheelEvent("
-                      << static_cast<const QWheelEvent *>(e)->pixelDelta()
-                      << static_cast<const QWheelEvent *>(e)->angleDelta()
-                      << ')';
-        return dbg.space();
-#endif
+static const char *eventTypeName(QEvent::Type t)
+{
+    static const int enumIdx = QEvent::staticMetaObject.indexOfEnumerator("Type");
+    return t <= QEvent::User
+        ? QEvent::staticMetaObject.enumerator(enumIdx).valueToKey(t)
+        : "User";
+}
+
+static const char *eventClassName(QEvent::Type t)
+{
+    switch (t) {
+    case QEvent::ActionAdded:
+    case QEvent::ActionRemoved:
+    case QEvent::ActionChanged:
+        return "QActionEvent";
+    case QEvent::MouseButtonPress:
+    case QEvent::MouseButtonRelease:
+    case QEvent::MouseButtonDblClick:
+    case QEvent::MouseMove:
+    case QEvent::NonClientAreaMouseMove:
+    case QEvent::NonClientAreaMouseButtonPress:
+    case QEvent::NonClientAreaMouseButtonRelease:
+    case QEvent::NonClientAreaMouseButtonDblClick:
+        return "QMouseEvent";
+    case QEvent::DragEnter:
+        return "QDragEnterEvent";
+    case QEvent::DragMove:
+        return "QDragMoveEvent";
+    case QEvent::Drop:
+        return "QDropEvent";
     case QEvent::KeyPress:
     case QEvent::KeyRelease:
     case QEvent::ShortcutOverride:
-        {
-            const QKeyEvent *ke = static_cast<const QKeyEvent*>(e);
-            switch(ke->type()) {
-            case QEvent::ShortcutOverride:
-                n = "ShortcutOverride";
-                break;
-            case QEvent::KeyRelease:
-                n = "KeyRelease";
-                break;
-            case QEvent::KeyPress:
-            default:
-                n = "KeyPress";
-                break;
-            }
-            dbg.nospace() << "QKeyEvent("  << n
-                          << ", " << hex << ke->key()
-                          << ", " << hex << (int)ke->modifiers()
-                          << ", \"" << ke->text()
-                          << "\", " << ke->isAutoRepeat()
-                          << ", " << ke->count()
-                          << ')';
-        }
-        return dbg.space();
+        return "QKeyEvent";
     case QEvent::FocusIn:
-        n = "FocusIn";
-        break;
     case QEvent::FocusOut:
-        n = "FocusOut";
-        break;
-    case QEvent::Enter:
-        n = "Enter";
-        break;
-    case QEvent::Leave:
-        n = "Leave";
-        break;
-    case QEvent::PaletteChange:
-        n = "PaletteChange";
-        break;
-    case QEvent::PolishRequest:
-        n = "PolishRequest";
-        break;
-    case QEvent::Polish:
-        n = "Polish";
-        break;
-    case QEvent::UpdateRequest:
-        n = "UpdateRequest";
-        break;
+    case QEvent::FocusAboutToChange:
+        return "QFocusEvent";
+    case QEvent::ChildAdded:
+    case QEvent::ChildPolished:
+    case QEvent::ChildRemoved:
+        return "QChildEvent";
     case QEvent::Paint:
-        n = "Paint";
-        break;
+        return "QPaintEvent";
     case QEvent::Move:
-        n = "Move";
-        break;
+        return "QMoveEvent";
     case QEvent::Resize:
-        n = "Resize";
-        break;
-    case QEvent::Create:
-        n = "Create";
-        break;
-    case QEvent::Destroy:
-        n = "Destroy";
-        break;
-    case QEvent::Close:
-        n = "Close";
-        break;
-    case QEvent::Quit:
-        n = "Quit";
-        break;
-    case QEvent::FileOpen:
-        n = "FileOpen";
-        break;
+        return "QResizeEvent";
     case QEvent::Show:
-        n = "Show";
-        break;
-    case QEvent::ShowToParent:
-        n = "ShowToParent";
-        break;
+        return "QShowEvent";
     case QEvent::Hide:
-        n = "Hide";
-        break;
-    case QEvent::HideToParent:
-        n = "HideToParent";
-        break;
-    case QEvent::None:
-        n = "None";
-        break;
-    case QEvent::ParentChange:
-        n = "ParentChange";
-        break;
-    case QEvent::ParentAboutToChange:
-        n = "ParentAboutToChange";
-        break;
+        return "QHideEvent";
+    case QEvent::Enter:
+        return "QEnterEvent";
+    case QEvent::Close:
+        return "QCloseEvent";
+    case QEvent::FileOpen:
+        return "QFileOpenEvent";
+#ifndef QT_NO_GESTURES
+    case QEvent::NativeGesture:
+        return "QNativeGestureEvent";
+    case QEvent::Gesture:
+    case QEvent::GestureOverride:
+        return "QGestureEvent";
+#endif
     case QEvent::HoverEnter:
-        n = "HoverEnter";
-        break;
-    case QEvent::HoverMove:
-        n = "HoverMove";
-        break;
     case QEvent::HoverLeave:
-        n = "HoverLeave";
-        break;
-    case QEvent::ZOrderChange:
-        n = "ZOrderChange";
-        break;
-    case QEvent::StyleChange:
-        n = "StyleChange";
-        break;
-    case QEvent::DragEnter:
-        n = "DragEnter";
-        break;
-    case QEvent::DragMove:
-        n = "DragMove";
-        break;
-    case QEvent::DragLeave:
-        n = "DragLeave";
-        break;
-    case QEvent::Drop:
-        n = "Drop";
-        break;
+    case QEvent::HoverMove:
+        return "QHoverEvent";
+    case QEvent::TabletEnterProximity:
+    case QEvent::TabletLeaveProximity:
+    case QEvent::TabletPress:
+    case QEvent::TabletMove:
+    case QEvent::TabletRelease:
+        return "QTabletEvent";
+    case QEvent::StatusTip:
+        return "QStatusTipEvent";
+    case QEvent::ToolTip:
+        return "QHelpEvent";
+    case QEvent::WindowStateChange:
+        return "QWindowStateChangeEvent";
+    case QEvent::Wheel:
+        return "QWheelEvent";
+    case QEvent::TouchBegin:
+    case QEvent::TouchUpdate:
+    case QEvent::TouchEnd:
+        return "QTouchEvent";
+    case QEvent::Shortcut:
+        return "QShortcutEvent";
+    case QEvent::InputMethod:
+        return "QInputMethodEvent";
+    case QEvent::InputMethodQuery:
+        return "QInputMethodQueryEvent";
+    case QEvent::OrientationChange:
+        return "QScreenOrientationChangeEvent";
+    case QEvent::ScrollPrepare:
+        return "QScrollPrepareEvent";
+    case QEvent::Scroll:
+        return "QScrollEvent";
     case QEvent::GraphicsSceneMouseMove:
-        n = "GraphicsSceneMouseMove";
-        break;
     case QEvent::GraphicsSceneMousePress:
-        n = "GraphicsSceneMousePress";
-        break;
     case QEvent::GraphicsSceneMouseRelease:
-        n = "GraphicsSceneMouseRelease";
-        break;
     case QEvent::GraphicsSceneMouseDoubleClick:
-        n = "GraphicsSceneMouseDoubleClick";
-        break;
+        return "QGraphicsSceneMouseEvent";
     case QEvent::GraphicsSceneContextMenu:
-        n = "GraphicsSceneContextMenu";
-        break;
     case QEvent::GraphicsSceneHoverEnter:
-        n = "GraphicsSceneHoverEnter";
-        break;
     case QEvent::GraphicsSceneHoverMove:
-        n = "GraphicsSceneHoverMove";
-        break;
     case QEvent::GraphicsSceneHoverLeave:
-        n = "GraphicsSceneHoverLeave";
-        break;
     case QEvent::GraphicsSceneHelp:
-        n = "GraphicsSceneHelp";
-        break;
     case QEvent::GraphicsSceneDragEnter:
-        n = "GraphicsSceneDragEnter";
-        break;
     case QEvent::GraphicsSceneDragMove:
-        n = "GraphicsSceneDragMove";
-        break;
     case QEvent::GraphicsSceneDragLeave:
-        n = "GraphicsSceneDragLeave";
-        break;
     case QEvent::GraphicsSceneDrop:
-        n = "GraphicsSceneDrop";
-        break;
     case QEvent::GraphicsSceneWheel:
-        n = "GraphicsSceneWheel";
+        return "QGraphicsSceneEvent";
+    case QEvent::Timer:
+        return "QTimerEvent";
+    default:
         break;
-    case QEvent::GraphicsSceneResize:
-        n = "GraphicsSceneResize";
+    }
+    return "QEvent";
+}
+
+namespace {
+// Make protected QObject::staticQtMetaObject accessible for formatting enums.
+class DebugHelper : public QObject {
+public:
+    static const char *mouseButtonToString(Qt::MouseButton button)
+    {
+        static const int enumIdx = QObject::staticQtMetaObject.indexOfEnumerator("MouseButtons");
+        return QObject::staticQtMetaObject.enumerator(enumIdx).valueToKey(button);
+    }
+
+    static QByteArray mouseButtonsToString(Qt::MouseButtons buttons)
+    {
+        QByteArray result;
+        for (int i = 0; (uint)(1 << i) <= Qt::MaxMouseButton; ++i) {
+            const Qt::MouseButton button = static_cast<Qt::MouseButton>(1 << i);
+            if (buttons.testFlag(button)) {
+                if (!result.isEmpty())
+                    result.append('|');
+                result.append(mouseButtonToString(button));
+            }
+        }
+        if (result.isEmpty())
+            result.append("NoButton");
+        return result;
+    }
+
+    static const char *mouseEventSourceToString(Qt::MouseEventSource source)
+    {
+        static const int enumIdx = QObject::staticQtMetaObject.indexOfEnumerator("MouseEventSource");
+        return QObject::staticQtMetaObject.enumerator(enumIdx).valueToKey(source);
+    }
+
+    static const char *focusReasonToString(Qt::FocusReason reason)
+    {
+        static const int enumIdx = QObject::staticQtMetaObject.indexOfEnumerator("FocusReason");
+        return QObject::staticQtMetaObject.enumerator(enumIdx).valueToKey(reason);
+    }
+
+#  ifndef QT_NO_GESTURES
+    static const char *nativeGestureTypeToString(Qt::NativeGestureType type)
+    {
+        static const int enumIdx = QObject::staticQtMetaObject.indexOfEnumerator("NativeGestureType");
+        return QObject::staticQtMetaObject.enumerator(enumIdx).valueToKey(type);
+    }
+#  endif // !QT_NO_GESTURES
+};
+} // namespace
+
+#  ifndef QT_NO_DRAGANDDROP
+
+static void formatDropEvent(QDebug d, const QDropEvent *e)
+{
+    const QEvent::Type type = e->type();
+    d << eventClassName(type) << "(dropAction=" << e->dropAction() << ", proposedAction="
+        << e->proposedAction() << ", possibleActions=" << e->possibleActions()
+        << ", posF=" << e->posF();
+    if (type == QEvent::DragMove || type == QEvent::DragEnter)
+        d << ", answerRect=" << static_cast<const QDragMoveEvent *>(e)->answerRect();
+    d << ", formats=" << e->mimeData()->formats();
+    if (const Qt::KeyboardModifiers mods = e->keyboardModifiers())
+        d << ", keyboardModifiers=" << mods;
+    d << ", " << DebugHelper::mouseButtonsToString(e->mouseButtons()).constData();
+}
+
+#  endif // !QT_NO_DRAGANDDROP
+
+#  ifndef QT_NO_TABLETEVENT
+
+static void formatTabletEvent(QDebug d, const QTabletEvent *e)
+{
+    const QEvent::Type type = e->type();
+
+    static const int deviceEnumIdx = QTabletEvent::staticMetaObject.indexOfEnumerator("TabletDevice");
+    static const int pointerTypeEnumIdx = QTabletEvent::staticMetaObject.indexOfEnumerator("PointerType");
+    const char* device = QTabletEvent::staticMetaObject.enumerator(deviceEnumIdx).valueToKey(e->device());
+    const char* pointerType = QTabletEvent::staticMetaObject.enumerator(pointerTypeEnumIdx).valueToKey(e->pointerType());
+
+    d << eventClassName(type)  << '(' << eventTypeName(type)
+      << ", device=" << device
+      << ", pointerType=" << pointerType
+      << ", uniqueId=" << e->uniqueId()
+      << ", pos=" << e->posF()
+      << ", z=" << e->z()
+      << ", xTilt=" << e->xTilt()
+      << ", yTilt=" << e->yTilt()
+      << ", " << DebugHelper::mouseButtonsToString(e->buttons()).constData();
+    if (type == QEvent::TabletPress || type == QEvent::TabletMove)
+        d << ", pressure=" << e->pressure();
+    if (e->device() == QTabletEvent::RotationStylus || e->device() == QTabletEvent::FourDMouse)
+        d << ", rotation=" << e->rotation();
+    if (e->device() == QTabletEvent::Airbrush)
+        d << ", tangentialPressure=" << e->tangentialPressure();
+}
+
+#  endif // !QT_NO_TABLETEVENT
+
+QDebug operator<<(QDebug dbg, const QTouchEvent::TouchPoint &tp)
+{
+    QDebugStateSaver saver(dbg);
+    dbg.nospace();
+    formatTouchPoint(dbg, tp);
+    return dbg;
+}
+
+QDebug operator<<(QDebug dbg, const QEvent *e)
+{
+    QDebugStateSaver saver(dbg);
+    dbg.nospace();
+    if (!e) {
+        dbg << "QEvent(this = 0x0)";
+        return dbg;
+    }
+    // More useful event output could be added here
+    const QEvent::Type type = e->type();
+    switch (type) {
+    case QEvent::Expose:
+        dbg << "QExposeEvent(" << static_cast<const QExposeEvent *>(e)->region() << ')';
         break;
-    case QEvent::GraphicsSceneMove:
-        n = "GraphicsSceneMove";
+    case QEvent::MouseButtonPress:
+    case QEvent::MouseMove:
+    case QEvent::MouseButtonRelease:
+    case QEvent::MouseButtonDblClick:
+    case QEvent::NonClientAreaMouseButtonPress:
+    case QEvent::NonClientAreaMouseMove:
+    case QEvent::NonClientAreaMouseButtonRelease:
+    case QEvent::NonClientAreaMouseButtonDblClick:
+    {
+        const QMouseEvent *me = static_cast<const QMouseEvent*>(e);
+        const Qt::MouseButton button = me->button();
+        const Qt::MouseButtons buttons = me->buttons();
+        dbg << "QMouseEvent(" << eventTypeName(type);
+        if (type != QEvent::MouseMove && type != QEvent::NonClientAreaMouseMove)
+            dbg << ", " << DebugHelper::mouseButtonToString(button);
+        if (buttons && button != buttons)
+            dbg << ", buttons=" << DebugHelper::mouseButtonsToString(buttons).constData();
+        if (const int mods = int(me->modifiers()))
+            dbg << ", modifiers=0x" << hex << mods << dec;
+        dbg << ", localPos=" << me->localPos() << ", screenPos=" << me->screenPos();
+        if (me->source())
+            dbg << ", " << DebugHelper::mouseEventSourceToString(me->source());
+        if (const Qt::MouseEventFlags flags = me->flags())
+            dbg << ", flags = " << hex << int(flags) << dec;
+        dbg << ')';
+    }
         break;
-    case QEvent::CursorChange:
-        n = "CursorChange";
+#  ifndef QT_NO_WHEELEVENT
+    case QEvent::Wheel: {
+        const QWheelEvent *we = static_cast<const QWheelEvent *>(e);
+        dbg << "QWheelEvent(" << "pixelDelta=" << we->pixelDelta() << ", angleDelta=" << we->angleDelta() << ')';
+    }
         break;
-    case QEvent::ToolTipChange:
-        n = "ToolTipChange";
+#  endif // !QT_NO_WHEELEVENT
+    case QEvent::KeyPress:
+    case QEvent::KeyRelease:
+    case QEvent::ShortcutOverride:
+    {
+        const QKeyEvent *ke = static_cast<const QKeyEvent *>(e);
+        dbg << "QKeyEvent("  << eventTypeName(type)
+            << ", key=0x" << hex << ke->key() << dec;
+        if (const int mods = ke->modifiers())
+            dbg << ", modifiers=0x" << hex << mods << dec;
+        if (!ke->text().isEmpty())
+            dbg << ", text=" << ke->text();
+        if (ke->isAutoRepeat())
+            dbg << ", autorepeat, count=" << ke->count();
+        dbg << ')';
+    }
         break;
-    case QEvent::StatusTip:
-        n = "StatusTip";
+    case QEvent::Shortcut: {
+        const QShortcutEvent *se = static_cast<const QShortcutEvent *>(e);
+        dbg << "QShortcutEvent(" << se->key().toString() << ", id=" << se->shortcutId();
+        if (se->isAmbiguous())
+            dbg << ", ambiguous";
+        dbg << ')';
+    }
         break;
-    case QEvent::WhatsThis:
-        n = "WhatsThis";
+    case QEvent::FocusAboutToChange:
+    case QEvent::FocusIn:
+    case QEvent::FocusOut:
+        dbg << "QFocusEvent(" << eventTypeName(type) << ", "
+            << DebugHelper::focusReasonToString(static_cast<const QFocusEvent *>(e)->reason())
+            << ')';
         break;
-    case QEvent::FontChange:
-        n = "FontChange";
+    case QEvent::Move: {
+        const QMoveEvent *me = static_cast<const QMoveEvent *>(e);
+        dbg << "QMoveEvent(" << me->pos();
+        if (!me->spontaneous())
+            dbg << ", non-spontaneous";
+        dbg << ')';
+    }
+         break;
+    case QEvent::Resize: {
+        const QResizeEvent *re = static_cast<const QResizeEvent *>(e);
+        dbg << "QResizeEvent(" << re->size();
+        if (!re->spontaneous())
+            dbg << ", non-spontaneous";
+        dbg << ')';
+    }
         break;
-    case QEvent::Style:
-        n = "Style";
+#  ifndef QT_NO_DRAGANDDROP
+    case QEvent::DragEnter:
+    case QEvent::DragMove:
+    case QEvent::Drop:
+        formatDropEvent(dbg, static_cast<const QDropEvent *>(e));
         break;
-    case QEvent::KeyboardLayoutChange:
-        n = "KeyboardLayoutChange";
+#  endif // !QT_NO_DRAGANDDROP
+    case QEvent::InputMethod:
+        formatInputMethodEvent(dbg, static_cast<const QInputMethodEvent *>(e));
         break;
-    case QEvent::DynamicPropertyChange:
-        n = "DynamicPropertyChange";
+    case QEvent::InputMethodQuery:
+        formatInputMethodQueryEvent(dbg, static_cast<const QInputMethodQueryEvent *>(e));
         break;
-    case QEvent::GrabMouse:
-        n = "GrabMouse";
+    case QEvent::TouchBegin:
+    case QEvent::TouchUpdate:
+    case QEvent::TouchEnd:
+        formatTouchEvent(dbg, eventTypeName(type), *static_cast<const QTouchEvent*>(e));
         break;
-    case QEvent::UngrabMouse:
-        n = "UngrabMouse";
+    case QEvent::ChildAdded:
+    case QEvent::ChildPolished:
+    case QEvent::ChildRemoved:
+        dbg << "QChildEvent(" << eventTypeName(type) << ", " << (static_cast<const QChildEvent*>(e))->child() << ')';
         break;
-    case QEvent::GrabKeyboard:
-        n = "GrabKeyboard";
+#  ifndef QT_NO_GESTURES
+    case QEvent::NativeGesture: {
+        const QNativeGestureEvent *ne = static_cast<const QNativeGestureEvent *>(e);
+        dbg << "QNativeGestureEvent(" << DebugHelper::nativeGestureTypeToString(ne->gestureType())
+            << "localPos=" << ne->localPos() << ", value=" << ne->value() << ')';
+    }
+         break;
+#  endif // !QT_NO_GESTURES
+    case QEvent::ApplicationStateChange:
+        dbg << "QApplicationStateChangeEvent("
+            << static_cast<const QApplicationStateChangeEvent *>(e)->applicationState() << ')';
         break;
-    case QEvent::UngrabKeyboard:
-        n = "UngrabKeyboard";
+    case QEvent::ContextMenu:
+        dbg << "QContextMenuEvent(" << static_cast<const QContextMenuEvent *>(e)->pos() << ')';
         break;
-    case QEvent::TouchBegin:
-        n = "TouchBegin";
-    case QEvent::TouchUpdate:
-        n = n ? n : "TouchUpdate";
-    case QEvent::TouchEnd:
-        n = n ? n : "TouchEnd";
-        formatTouchEvent(dbg.nospace(), n, *static_cast<const QTouchEvent*>(e));
-        return dbg.space();
-    case QEvent::ChildAdded: n = n ? n : "ChildAdded";
-    case QEvent::ChildPolished: n = n ? n : "ChildPolished";
-    case QEvent::ChildRemoved: n = n ? n : "ChildRemoved";
-        dbg.nospace() << "QChildEvent(" << n << ", " << (static_cast<const QChildEvent*>(e))->child();
-        return dbg.space();
-#ifndef QT_NO_GESTURES
-    case QEvent::Gesture:
-        n = "Gesture";
+#  ifndef QT_NO_TABLETEVENT
+    case QEvent::TabletEnterProximity:
+    case QEvent::TabletLeaveProximity:
+    case QEvent::TabletPress:
+    case QEvent::TabletMove:
+    case QEvent::TabletRelease:
+        formatTabletEvent(dbg, static_cast<const QTabletEvent *>(e));
+        break;
+#  endif // !QT_NO_TABLETEVENT
+    case QEvent::Enter:
+        dbg << "QEnterEvent(" << static_cast<const QEnterEvent *>(e)->pos() << ')';
+        break;
+    case QEvent::Timer:
+        dbg << "QTimerEvent(id=" << static_cast<const QTimerEvent *>(e)->timerId() << ')';
         break;
-#endif
     default:
-        dbg.nospace() << "QEvent(" << (const void *)e << ", type = " << e->type() << ')';
-        return dbg.space();
+        dbg << eventClassName(type) << '(' << eventTypeName(type) << ", "
+            << (const void *)e << ", type = " << e->type() << ')';
+        break;
     }
-
-    dbg.nospace() << 'Q' << n << "Event(" << (const void *)e << ')';
-    return dbg.space();
+    return dbg;
 }
-#endif
+#endif // !QT_NO_DEBUG_STREAM
 
 /*!
     \class QShortcutEvent
@@ -3570,7 +3830,7 @@ QDebug operator<<(QDebug dbg, const QEvent *e) {
     \ingroup events
     \inmodule QtGui
 
-    Normally you don't need to use this class directly; QShortcut
+    Normally you do not need to use this class directly; QShortcut
     provides a higher-level interface to handle shortcut keys.
 
     \sa QShortcut
@@ -3729,7 +3989,7 @@ QWindowStateChangeEvent::~QWindowStateChangeEvent()
     This makes it possible for sibling widgets to handle touch events independently while making
     sure that the sequence of QTouchEvents is always correct.
 
-    \section1 Mouse Events and Touch Event synthesizing
+    \section1 Mouse Events and Touch Event Synthesizing
 
     QTouchEvent delivery is independent from that of QMouseEvent. The application flags
     Qt::AA_SynthesizeTouchForUnhandledMouseEvents and Qt::AA_SynthesizeMouseForUnhandledTouchEvents
diff --git a/src/gui/kernel/qevent.h b/src/gui/kernel/qevent.h
index 0a826284c9..6fca54e2b6 100644
--- a/src/gui/kernel/qevent.h
+++ b/src/gui/kernel/qevent.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -223,6 +215,9 @@ protected:
 #ifndef QT_NO_TABLETEVENT
 class Q_GUI_EXPORT QTabletEvent : public QInputEvent
 {
+    Q_GADGET
+    Q_ENUMS(TabletDevice)
+    Q_ENUMS(PointerType)
 public:
     enum TabletDevice { NoDevice, Puck, Stylus, Airbrush, FourDMouse,
                         XFreeEraser /*internal*/, RotationStylus };
@@ -230,7 +225,12 @@ public:
     QTabletEvent(Type t, const QPointF &pos, const QPointF &globalPos,
                  int device, int pointerType, qreal pressure, int xTilt, int yTilt,
                  qreal tangentialPressure, qreal rotation, int z,
-                 Qt::KeyboardModifiers keyState, qint64 uniqueID);
+                 Qt::KeyboardModifiers keyState, qint64 uniqueID); // ### remove in Qt 6
+    QTabletEvent(Type t, const QPointF &pos, const QPointF &globalPos,
+                 int device, int pointerType, qreal pressure, int xTilt, int yTilt,
+                 qreal tangentialPressure, qreal rotation, int z,
+                 Qt::KeyboardModifiers keyState, qint64 uniqueID,
+                 Qt::MouseButton button, Qt::MouseButtons buttons);
     ~QTabletEvent();
 
     inline QPoint pos() const { return mPos.toPoint(); }
@@ -257,6 +257,8 @@ public:
     inline qreal rotation() const { return mRot; }
     inline int xTilt() const { return mXT; }
     inline int yTilt() const { return mYT; }
+    Qt::MouseButton button() const;
+    Qt::MouseButtons buttons() const;
 
 protected:
     QPointF mPos, mGPos;
@@ -264,9 +266,8 @@ protected:
     qreal mPress, mTangential, mRot;
     qint64 mUnique;
 
-    // I don't know what the future holds for tablets but there could be some
-    // new devices coming along, and there seem to be "holes" in the
-    // OS-specific events for this.
+    // QTabletEventPrivate for extra storage.
+    // ### Qt 6: QPointingEvent will have Buttons, QTabletEvent will inherit
     void *mExtra;
 };
 #endif // QT_NO_TABLETEVENT
@@ -377,8 +378,6 @@ public:
     inline const QRegion &region() const { return m_region; }
 
 protected:
-    friend class QApplication;
-    friend class QCoreApplication;
     QRect m_rect;
     QRegion m_region;
     bool m_erased;
@@ -395,7 +394,6 @@ public:
 protected:
     QPoint p, oldp;
     friend class QApplication;
-    friend class QCoreApplication;
 };
 
 class Q_GUI_EXPORT QExposeEvent : public QEvent
@@ -421,7 +419,6 @@ public:
 protected:
     QSize s, olds;
     friend class QApplication;
-    friend class QCoreApplication;
 };
 
 
@@ -601,7 +598,6 @@ public:
     inline void ignore(const QRect & r) { ignore(); rect = r; }
 
 protected:
-    friend class QApplication;
     QRect rect;
 };
 
@@ -760,7 +756,11 @@ public:
         enum InfoFlag {
             Pen  = 0x0001
         };
+#ifndef Q_MOC_RUN
+        // otherwise moc gives
+        // Error: Meta object features not supported for nested classes
         Q_DECLARE_FLAGS(InfoFlags, InfoFlag)
+#endif
 
         explicit TouchPoint(int id = -1);
         TouchPoint(const TouchPoint &other);
@@ -881,6 +881,10 @@ protected:
 Q_DECLARE_TYPEINFO(QTouchEvent::TouchPoint, Q_MOVABLE_TYPE);
 Q_DECLARE_OPERATORS_FOR_FLAGS(QTouchEvent::TouchPoint::InfoFlags)
 
+#ifndef QT_NO_DEBUG_STREAM
+Q_GUI_EXPORT QDebug operator<<(QDebug, const QTouchEvent::TouchPoint &);
+#endif
+
 class Q_GUI_EXPORT QScrollPrepareEvent : public QEvent
 {
 public:
diff --git a/src/gui/kernel/qevent_p.h b/src/gui/kernel/qevent_p.h
index e01216e9f1..01c5be3b82 100644
--- a/src/gui/kernel/qevent_p.h
+++ b/src/gui/kernel/qevent_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -92,6 +84,20 @@ public:
     QVector<QPointF> rawScreenPositions;
 };
 
+#ifndef QT_NO_TABLETEVENT
+class QTabletEventPrivate
+{
+public:
+    inline QTabletEventPrivate(Qt::MouseButton button, Qt::MouseButtons buttons)
+        : b(button),
+          buttonState(buttons)
+    { }
+
+    Qt::MouseButton b;
+    Qt::MouseButtons buttonState;
+};
+#endif // QT_NO_TABLETEVENT
+
 QT_END_NAMESPACE
 
 #endif // QEVENT_P_H
diff --git a/src/gui/kernel/qgenericplugin.cpp b/src/gui/kernel/qgenericplugin.cpp
index 6939087e59..db1984c3a2 100644
--- a/src/gui/kernel/qgenericplugin.cpp
+++ b/src/gui/kernel/qgenericplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qgenericplugin.h b/src/gui/kernel/qgenericplugin.h
index f00a532283..bcf6943a90 100644
--- a/src/gui/kernel/qgenericplugin.h
+++ b/src/gui/kernel/qgenericplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qgenericpluginfactory.cpp b/src/gui/kernel/qgenericpluginfactory.cpp
index 8e3b45d1a8..599f7f345a 100644
--- a/src/gui/kernel/qgenericpluginfactory.cpp
+++ b/src/gui/kernel/qgenericpluginfactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qgenericpluginfactory.h b/src/gui/kernel/qgenericpluginfactory.h
index 2443e670cc..c2faa881f7 100644
--- a/src/gui/kernel/qgenericpluginfactory.h
+++ b/src/gui/kernel/qgenericpluginfactory.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qguiapplication.cpp b/src/gui/kernel/qguiapplication.cpp
index 4727e754cd..3e50ce44c4 100644
--- a/src/gui/kernel/qguiapplication.cpp
+++ b/src/gui/kernel/qguiapplication.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -82,6 +74,7 @@
 #include <qpa/qwindowsysteminterface_p.h>
 #include "private/qwindow_p.h"
 #include "private/qcursor_p.h"
+#include "private/qopenglcontext_p.h"
 
 #include "private/qdnd_p.h"
 #include <qpa/qplatformthemefactory_p.h>
@@ -118,7 +111,7 @@ Qt::KeyboardModifiers QGuiApplicationPrivate::modifier_buttons = Qt::NoModifier;
 
 QPointF QGuiApplicationPrivate::lastCursorPosition(qInf(), qInf());
 
-bool QGuiApplicationPrivate::tabletState = false;
+Qt::MouseButtons QGuiApplicationPrivate::tabletState = Qt::NoButton;
 QWindow *QGuiApplicationPrivate::tabletPressTarget = 0;
 QWindow *QGuiApplicationPrivate::currentMouseWindow = 0;
 
@@ -509,6 +502,7 @@ static QWindowGeometrySpecification windowGeometrySpecification;
         \li \c {-qwindowgeometry} \e geometry, specifies window geometry for
             the main window using the X11-syntax. For example:
             \c {-qwindowgeometry 100x100+50+50}
+        \li \c {-qwindowicon}, sets the default window icon
         \li \c {-qwindowtitle}, sets the title of the first window
         \li \c{-reverse}, sets the application's layout direction to
             Qt::RightToLeft. This option is intended to aid debugging and should
@@ -606,7 +600,8 @@ QGuiApplicationPrivate::QGuiApplicationPrivate(int &argc, char **argv, int flags
     : QCoreApplicationPrivate(argc, argv, flags),
       styleHints(0),
       inputMethod(0),
-      lastTouchType(QEvent::TouchEnd)
+      lastTouchType(QEvent::TouchEnd),
+      ownGlobalShareContext(false)
 {
     self = this;
     application_type = QCoreApplicationPrivate::Gui;
@@ -903,7 +898,19 @@ QList<QScreen *> QGuiApplication::screens()
 
     This signal is emitted whenever a new screen \a screen has been added to the system.
 
-    \sa screens(), primaryScreen()
+    \sa screens(), primaryScreen(), screenRemoved()
+*/
+
+/*!
+    \fn void QGuiApplication::screenRemoved(QScreen *screen)
+
+    This signal is emitted whenever a \a screen is removed from the system. It
+    provides an opportunity to manage the windows on the screen before Qt falls back
+    to moving them to the primary screen.
+
+    \sa screens(), screenAdded(), QObject::destroyed(), QWindow::setScreen()
+
+    \since 5.4
 */
 
 
@@ -1115,12 +1122,15 @@ void QGuiApplicationPrivate::createPlatformIntegration()
 
     // Get command line params
 
+    QString icon;
+
     int j = argc ? 1 : 0;
     for (int i=1; i<argc; i++) {
         if (argv[i] && *argv[i] != '-') {
             argv[j++] = argv[i];
             continue;
         }
+        const bool isXcb = platformName == "xcb";
         QByteArray arg = argv[i];
         if (arg.startsWith("--"))
             arg.remove(0, 1);
@@ -1133,12 +1143,16 @@ void QGuiApplicationPrivate::createPlatformIntegration()
         } else if (arg == "-platformtheme") {
             if (++i < argc)
                 platformThemeName = QString::fromLocal8Bit(argv[i]);
-        } else if (arg == "-qwindowgeometry" || (platformName == "xcb" && arg == "-geometry")) {
+        } else if (arg == "-qwindowgeometry" || (isXcb && arg == "-geometry")) {
             if (++i < argc)
                 windowGeometrySpecification = QWindowGeometrySpecification::fromArgument(argv[i]);
-        } else if (arg == "-qwindowtitle" || (platformName == "xcb" && arg == "-title")) {
+        } else if (arg == "-qwindowtitle" || (isXcb && arg == "-title")) {
             if (++i < argc)
                 firstWindowTitle = QString::fromLocal8Bit(argv[i]);
+        } else if (arg == "-qwindowicon" || (isXcb && arg == "-icon")) {
+            if (++i < argc) {
+                icon = QString::fromLocal8Bit(argv[i]);
+            }
         } else {
             argv[j++] = argv[i];
         }
@@ -1151,6 +1165,8 @@ void QGuiApplicationPrivate::createPlatformIntegration()
 
     init_platform(QLatin1String(platformName), platformPluginPath, platformThemeName, argc, argv);
 
+    if (!icon.isEmpty())
+        forcedWindowIcon = QDir::isAbsolutePath(icon) ? QIcon(icon) : QIcon::fromTheme(icon);
 }
 
 /*!
@@ -1296,6 +1312,17 @@ void QGuiApplicationPrivate::init()
     qRegisterGuiGetInterpolator();
 #endif
 
+    // set a global share context when enabled unless there is already one
+#ifndef QT_NO_OPENGL
+    if (qApp->testAttribute(Qt::AA_ShareOpenGLContexts) && !qt_gl_global_share_context()) {
+        QOpenGLContext *ctx = new QOpenGLContext;
+        ctx->setFormat(QSurfaceFormat::defaultFormat());
+        ctx->create();
+        qt_gl_set_global_share_context(ctx);
+        ownGlobalShareContext = true;
+    }
+#endif
+
     QWindowSystemInterfacePrivate::eventTime.start();
 
     is_app_running = true;
@@ -1357,6 +1384,13 @@ QGuiApplicationPrivate::~QGuiApplicationPrivate()
 
     QPixmapCache::clear();
 
+#ifndef QT_NO_OPENGL
+    if (ownGlobalShareContext) {
+        delete qt_gl_global_share_context();
+        qt_gl_set_global_share_context(0);
+    }
+#endif
+
     delete platform_theme;
     platform_theme = 0;
     delete platform_integration;
@@ -1454,6 +1488,20 @@ QPlatformNativeInterface *QGuiApplication::platformNativeInterface()
 }
 
 /*!
+    Returns a function pointer from the platformplugin matching \a function
+*/
+QFunctionPointer QGuiApplication::platformFunction(const QByteArray &function)
+{
+    QPlatformIntegration *pi = QGuiApplicationPrivate::platformIntegration();
+    if (!pi) {
+        qWarning() << "QGuiApplication::platformFunction(): Must construct a QGuiApplication before accessing a platform function";
+        return Q_NULLPTR;
+    }
+
+    return pi->nativeInterface() ? pi->nativeInterface()->platformFunction(function) : Q_NULLPTR;
+}
+
+/*!
     Enters the main event loop and waits until exit() is called, and then
     returns the value that was set to exit() (which is 0 if exit() is called
     via quit()).
@@ -1576,8 +1624,9 @@ void QGuiApplicationPrivate::processWindowSystemEvent(QWindowSystemInterfacePriv
     case QWindowSystemInterfacePrivate::WindowScreenChanged:
         QGuiApplicationPrivate::processWindowScreenChangedEvent(static_cast<QWindowSystemInterfacePrivate::WindowScreenChangedEvent *>(e));
         break;
-    case QWindowSystemInterfacePrivate::ApplicationStateChanged:
-        QGuiApplicationPrivate::setApplicationState(static_cast<QWindowSystemInterfacePrivate::ApplicationStateChangedEvent *>(e)->newState);
+    case QWindowSystemInterfacePrivate::ApplicationStateChanged: {
+        QWindowSystemInterfacePrivate::ApplicationStateChangedEvent * changeEvent = static_cast<QWindowSystemInterfacePrivate::ApplicationStateChangedEvent *>(e);
+        QGuiApplicationPrivate::setApplicationState(changeEvent->newState, changeEvent->forcePropagate); }
         break;
     case QWindowSystemInterfacePrivate::FlushEvents:
         QWindowSystemInterface::deferredFlushWindowSystemEvents();
@@ -1594,10 +1643,6 @@ void QGuiApplicationPrivate::processWindowSystemEvent(QWindowSystemInterfacePriv
         QGuiApplicationPrivate::reportGeometryChange(
                 static_cast<QWindowSystemInterfacePrivate::ScreenGeometryEvent *>(e));
         break;
-    case QWindowSystemInterfacePrivate::ScreenAvailableGeometry:
-        QGuiApplicationPrivate::reportAvailableGeometryChange(
-                static_cast<QWindowSystemInterfacePrivate::ScreenAvailableGeometryEvent *>(e));
-        break;
     case QWindowSystemInterfacePrivate::ScreenLogicalDotsPerInch:
         QGuiApplicationPrivate::reportLogicalDotsPerInchChange(
                 static_cast<QWindowSystemInterfacePrivate::ScreenLogicalDotsPerInchEvent *>(e));
@@ -1664,7 +1709,8 @@ void QGuiApplicationPrivate::processMouseEvent(QWindowSystemInterfacePrivate::Mo
         // with the current event, we fake a move-only event that we recurse and process first. This
         // will update the global mouse position and cause the second event to be a button only event.
         QWindowSystemInterfacePrivate::MouseEvent moveEvent(e->window.data(),
-                e->timestamp, e->type, e->localPos, e->globalPos, buttons, e->modifiers);
+                e->timestamp, e->type, e->localPos, e->globalPos, buttons, e->modifiers, e->source);
+        moveEvent.synthetic = e->synthetic;
         processMouseEvent(&moveEvent);
         Q_ASSERT(e->globalPos == QGuiApplicationPrivate::lastCursorPosition);
         // continue with processing mouse button change event
@@ -1854,13 +1900,17 @@ void QGuiApplicationPrivate::processKeyEvent(QWindowSystemInterfacePrivate::KeyE
         ev.setAccepted(false);
 
     static bool backKeyPressAccepted = false;
+    static bool menuKeyPressAccepted = false;
     if (e->keyType == QEvent::KeyPress) {
         backKeyPressAccepted = e->key == Qt::Key_Back && ev.isAccepted();
-    } else if (e->keyType == QEvent::KeyRelease && e->key == Qt::Key_Back && !backKeyPressAccepted && !ev.isAccepted()) {
-        if (!window)
-            qApp->quit();
-        else
-            QWindowSystemInterface::handleCloseEvent(window);
+        menuKeyPressAccepted = e->key == Qt::Key_Menu && ev.isAccepted();
+    } else if (e->keyType == QEvent::KeyRelease) {
+        if (e->key == Qt::Key_Back && !backKeyPressAccepted && !ev.isAccepted()) {
+            if (window)
+                QWindowSystemInterface::handleCloseEvent(window);
+        } else if (e->key == Qt::Key_Menu && !menuKeyPressAccepted && !ev.isAccepted()) {
+            platform_theme->showPlatformMenuBar();
+        }
     }
 #endif
 }
@@ -1972,7 +2022,7 @@ void QGuiApplicationPrivate::processWindowScreenChangedEvent(QWindowSystemInterf
 {
     if (QWindow *window  = wse->window.data()) {
         if (QScreen *screen = wse->screen.data())
-            window->d_func()->setScreen(screen, false /* recreate */);
+            window->d_func()->setTopLevelScreen(screen, false /* recreate */);
         else // Fall back to default behavior, and try to find some appropriate screen
             window->setScreen(0);
     }
@@ -2058,10 +2108,8 @@ void QGuiApplicationPrivate::processTabletEvent(QWindowSystemInterfacePrivate::T
 {
 #ifndef QT_NO_TABLETEVENT
     QEvent::Type type = QEvent::TabletMove;
-    if (e->down != tabletState) {
-        type = e->down ? QEvent::TabletPress : QEvent::TabletRelease;
-        tabletState = e->down;
-    }
+    if (e->buttons != tabletState)
+        type = (e->buttons > tabletState) ? QEvent::TabletPress : QEvent::TabletRelease;
 
     QWindow *window = e->window.data();
     modifier_buttons = e->modifiers;
@@ -2093,12 +2141,21 @@ void QGuiApplicationPrivate::processTabletEvent(QWindowSystemInterfacePrivate::T
         QPointF delta = e->global - e->global.toPoint();
         local = window->mapFromGlobal(e->global.toPoint()) + delta;
     }
+    Qt::MouseButtons stateChange = e->buttons ^ tabletState;
+    Qt::MouseButton button = Qt::NoButton;
+    for (int check = Qt::LeftButton; check <= int(Qt::MaxMouseButton); check = check << 1) {
+        if (check & stateChange) {
+            button = Qt::MouseButton(check);
+            break;
+        }
+    }
     QTabletEvent ev(type, local, e->global,
                     e->device, e->pointerType, e->pressure, e->xTilt, e->yTilt,
                     e->tangentialPressure, e->rotation, e->z,
-                    e->modifiers, e->uid);
+                    e->modifiers, e->uid, button, e->buttons);
     ev.setTimestamp(e->timestamp);
     QGuiApplication::sendSpontaneousEvent(window, &ev);
+    tabletState = e->buttons;
 #else
     Q_UNUSED(e)
 #endif
@@ -2110,7 +2167,7 @@ void QGuiApplicationPrivate::processTabletEnterProximityEvent(QWindowSystemInter
     QTabletEvent ev(QEvent::TabletEnterProximity, QPointF(), QPointF(),
                     e->device, e->pointerType, 0, 0, 0,
                     0, 0, 0,
-                    Qt::NoModifier, e->uid);
+                    Qt::NoModifier, e->uid, Qt::NoButton, tabletState);
     ev.setTimestamp(e->timestamp);
     QGuiApplication::sendSpontaneousEvent(qGuiApp, &ev);
 #else
@@ -2124,7 +2181,7 @@ void QGuiApplicationPrivate::processTabletLeaveProximityEvent(QWindowSystemInter
     QTabletEvent ev(QEvent::TabletLeaveProximity, QPointF(), QPointF(),
                     e->device, e->pointerType, 0, 0, 0,
                     0, 0, 0,
-                    Qt::NoModifier, e->uid);
+                    Qt::NoModifier, e->uid, Qt::NoButton, tabletState);
     ev.setTimestamp(e->timestamp);
     QGuiApplication::sendSpontaneousEvent(qGuiApp, &ev);
 #else
@@ -2213,7 +2270,7 @@ void QGuiApplicationPrivate::processTouchEvent(QWindowSystemInterfacePrivate::To
                                                                e->timestamp,
                                                                synthIt->pos,
                                                                synthIt->screenPos,
-                                                               Qt::NoButton,
+                                                               buttons & ~Qt::LeftButton,
                                                                e->modifiers,
                                                                Qt::MouseEventSynthesizedByQt);
                 fake.synthetic = true;
@@ -2415,7 +2472,9 @@ void QGuiApplicationPrivate::processTouchEvent(QWindowSystemInterfacePrivate::To
                         QWindowSystemInterfacePrivate::MouseEvent fake(w, e->timestamp,
                                                                        touchPoint.pos(),
                                                                        touchPoint.screenPos(),
-                                                                       b, e->modifiers);
+                                                                       b | (buttons & ~Qt::LeftButton),
+                                                                       e->modifiers,
+                                                                       Qt::MouseEventSynthesizedByQt);
                         fake.synthetic = true;
                         processMouseEvent(&fake);
                         break;
@@ -2483,40 +2542,36 @@ void QGuiApplicationPrivate::reportGeometryChange(QWindowSystemInterfacePrivate:
         return;
 
     QScreen *s = e->screen.data();
-    s->d_func()->geometry = e->geometry;
 
-    Qt::ScreenOrientation primaryOrientation = s->primaryOrientation();
-    s->d_func()->updatePrimaryOrientation();
+    bool geometryChanged = e->geometry != s->d_func()->geometry;
+    s->d_func()->geometry = e->geometry;
 
-    emit s->geometryChanged(s->geometry());
-    emit s->physicalSizeChanged(s->physicalSize());
-    emit s->physicalDotsPerInchChanged(s->physicalDotsPerInch());
-    emit s->logicalDotsPerInchChanged(s->logicalDotsPerInch());
-    foreach (QScreen* sibling, s->virtualSiblings())
-        emit sibling->virtualGeometryChanged(sibling->virtualGeometry());
+    bool availableGeometryChanged = e->availableGeometry != s->d_func()->availableGeometry;
+    s->d_func()->availableGeometry = e->availableGeometry;
 
-    if (s->primaryOrientation() != primaryOrientation)
-        emit s->primaryOrientationChanged(s->primaryOrientation());
+    if (geometryChanged) {
+        Qt::ScreenOrientation primaryOrientation = s->primaryOrientation();
+        s->d_func()->updatePrimaryOrientation();
 
-    if (s->d_func()->orientation == Qt::PrimaryOrientation)
-        updateFilteredScreenOrientation(s);
-}
+        emit s->geometryChanged(s->geometry());
+        emit s->physicalSizeChanged(s->physicalSize());
+        emit s->physicalDotsPerInchChanged(s->physicalDotsPerInch());
+        emit s->logicalDotsPerInchChanged(s->logicalDotsPerInch());
 
-void QGuiApplicationPrivate::reportAvailableGeometryChange(
-        QWindowSystemInterfacePrivate::ScreenAvailableGeometryEvent *e)
-{
-    // This operation only makes sense after the QGuiApplication constructor runs
-    if (QCoreApplication::startingUp())
-        return;
+        if (s->primaryOrientation() != primaryOrientation)
+            emit s->primaryOrientationChanged(s->primaryOrientation());
 
-    if (!e->screen)
-        return;
+        if (s->d_func()->orientation == Qt::PrimaryOrientation)
+            updateFilteredScreenOrientation(s);
+    }
 
-    QScreen *s = e->screen.data();
-    s->d_func()->availableGeometry = e->availableGeometry;
+    if (availableGeometryChanged)
+        emit s->availableGeometryChanged(s->geometry());
 
-    foreach (QScreen* sibling, s->virtualSiblings())
-        emit sibling->virtualGeometryChanged(sibling->virtualGeometry());
+    if (geometryChanged || availableGeometryChanged) {
+        foreach (QScreen* sibling, s->virtualSiblings())
+            emit sibling->virtualGeometryChanged(sibling->virtualGeometry());
+    }
 }
 
 void QGuiApplicationPrivate::reportLogicalDotsPerInchChange(QWindowSystemInterfacePrivate::ScreenLogicalDotsPerInchEvent *e)
@@ -2656,6 +2711,15 @@ QClipboard * QGuiApplication::clipboard()
 #endif
 
 /*!
+    \since 5.4
+    \fn void QGuiApplication::paletteChanged(const QPalette &palette)
+
+    This signal is emitted when the \a palette of the application changes.
+
+    \sa palette()
+*/
+
+/*!
     Returns the default application palette.
 
     \sa setPalette()
@@ -2681,6 +2745,7 @@ void QGuiApplication::setPalette(const QPalette &pal)
     else
         *QGuiApplicationPrivate::app_pal = pal;
     applicationResourceFlags |= ApplicationPaletteExplicitlySet;
+    emit qGuiApp->paletteChanged(*QGuiApplicationPrivate::app_pal);
 }
 
 QRect QGuiApplicationPrivate::applyWindowGeometrySpecification(const QRect &windowGeometry, const QWindow *window)
@@ -2890,9 +2955,9 @@ Qt::ApplicationState QGuiApplication::applicationState()
     \sa applicationState()
 */
 
-void QGuiApplicationPrivate::setApplicationState(Qt::ApplicationState state)
+void QGuiApplicationPrivate::setApplicationState(Qt::ApplicationState state, bool forcePropagate)
 {
-    if (applicationState == state)
+    if ((applicationState == state) && !forcePropagate)
         return;
 
     applicationState = state;
@@ -3093,6 +3158,8 @@ void QGuiApplicationPrivate::saveState()
     On system start-up, the default layout direction depends on the
     application's language.
 
+    The notifier signal was introduced in Qt 5.4.
+
     \sa QWidget::layoutDirection, isLeftToRight(), isRightToLeft()
  */
 
@@ -3103,7 +3170,10 @@ void QGuiApplication::setLayoutDirection(Qt::LayoutDirection direction)
 
     layout_direction = direction;
 
-    QGuiApplicationPrivate::self->notifyLayoutDirectionChange();
+    if (qGuiApp) {
+        emit qGuiApp->layoutDirectionChanged(direction);
+        QGuiApplicationPrivate::self->notifyLayoutDirectionChange();
+    }
 }
 
 Qt::LayoutDirection QGuiApplication::layoutDirection()
diff --git a/src/gui/kernel/qguiapplication.h b/src/gui/kernel/qguiapplication.h
index 6d9a4b2376..713f2f2669 100644
--- a/src/gui/kernel/qguiapplication.h
+++ b/src/gui/kernel/qguiapplication.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,7 +67,7 @@ class Q_GUI_EXPORT QGuiApplication : public QCoreApplication
     Q_OBJECT
     Q_PROPERTY(QIcon windowIcon READ windowIcon WRITE setWindowIcon)
     Q_PROPERTY(QString applicationDisplayName READ applicationDisplayName WRITE setApplicationDisplayName)
-    Q_PROPERTY(Qt::LayoutDirection layoutDirection READ layoutDirection WRITE setLayoutDirection)
+    Q_PROPERTY(Qt::LayoutDirection layoutDirection READ layoutDirection WRITE setLayoutDirection NOTIFY layoutDirectionChanged)
     Q_PROPERTY(QString platformName READ platformName STORED false)
     Q_PROPERTY(bool quitOnLastWindowClosed  READ quitOnLastWindowClosed WRITE setQuitOnLastWindowClosed)
 
@@ -143,6 +135,8 @@ public:
 
     static QPlatformNativeInterface *platformNativeInterface();
 
+    static QFunctionPointer platformFunction(const QByteArray &function);
+
     static void setQuitOnLastWindowClosed(bool quit);
     static bool quitOnLastWindowClosed();
 
@@ -163,14 +157,17 @@ public:
 Q_SIGNALS:
     void fontDatabaseChanged();
     void screenAdded(QScreen *screen);
+    void screenRemoved(QScreen *screen);
     void lastWindowClosed();
     void focusObjectChanged(QObject *focusObject);
     void focusWindowChanged(QWindow *focusWindow);
     void applicationStateChanged(Qt::ApplicationState state);
+    void layoutDirectionChanged(Qt::LayoutDirection direction);
 #ifndef QT_NO_SESSIONMANAGER
     void commitDataRequest(QSessionManager &sessionManager);
     void saveStateRequest(QSessionManager &sessionManager);
 #endif
+    void paletteChanged(const QPalette &pal);
 
 protected:
     bool event(QEvent *);
diff --git a/src/gui/kernel/qguiapplication_p.h b/src/gui/kernel/qguiapplication_p.h
index 1ec808ec27..8988bd461d 100644
--- a/src/gui/kernel/qguiapplication_p.h
+++ b/src/gui/kernel/qguiapplication_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -137,7 +129,6 @@ public:
     static void reportScreenOrientationChange(QScreen *screen);
     static void reportScreenOrientationChange(QWindowSystemInterfacePrivate::ScreenOrientationEvent *e);
     static void reportGeometryChange(QWindowSystemInterfacePrivate::ScreenGeometryEvent *e);
-    static void reportAvailableGeometryChange(QWindowSystemInterfacePrivate::ScreenAvailableGeometryEvent *e);
     static void reportLogicalDotsPerInchChange(QWindowSystemInterfacePrivate::ScreenLogicalDotsPerInchEvent *e);
     static void reportRefreshRateChange(QWindowSystemInterfacePrivate::ScreenRefreshRateEvent *e);
     static void processThemeChanged(QWindowSystemInterfacePrivate::ThemeChangeEvent *tce);
@@ -207,7 +198,7 @@ public:
     static int mousePressY;
     static int mouse_double_click_distance;
     static QPointF lastCursorPosition;
-    static bool tabletState;
+    static Qt::MouseButtons tabletState;
     static QWindow *tabletPressTarget;
     static QWindow *currentMouseWindow;
     static Qt::ApplicationState applicationState;
@@ -234,6 +225,7 @@ public:
     QInputMethod *inputMethod;
 
     QString firstWindowTitle;
+    QIcon forcedWindowIcon;
 
     static QList<QObject *> generic_plugin_list;
 #ifndef QT_NO_SHORTCUT
@@ -288,7 +280,7 @@ public:
 
     static QRect applyWindowGeometrySpecification(const QRect &windowGeometry, const QWindow *window);
 
-    static void setApplicationState(Qt::ApplicationState state);
+    static void setApplicationState(Qt::ApplicationState state, bool forcePropagate = false);
 
 protected:
     virtual void notifyThemeChanged();
@@ -306,6 +298,8 @@ private:
     static QTouchDevice *m_fakeTouchDevice;
     static int m_fakeMouseSourcePointId;
     QAtomicPointer<QDrawHelperGammaTables> m_gammaTables;
+
+    bool ownGlobalShareContext;
 };
 
 Q_GUI_EXPORT uint qHash(const QGuiApplicationPrivate::ActiveTouchPointsKey &k);
diff --git a/src/gui/kernel/qguivariant.cpp b/src/gui/kernel/qguivariant.cpp
index 1739e8c6fd..07d72ac499 100644
--- a/src/gui/kernel/qguivariant.cpp
+++ b/src/gui/kernel/qguivariant.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qinputmethod.cpp b/src/gui/kernel/qinputmethod.cpp
index 495ea8f6e7..77c1f65545 100644
--- a/src/gui/kernel/qinputmethod.cpp
+++ b/src/gui/kernel/qinputmethod.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qinputmethod.h b/src/gui/kernel/qinputmethod.h
index b155b5c0ca..7be25c415c 100644
--- a/src/gui/kernel/qinputmethod.h
+++ b/src/gui/kernel/qinputmethod.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qinputmethod_p.h b/src/gui/kernel/qinputmethod_p.h
index 79b1299722..c6bd289dcf 100644
--- a/src/gui/kernel/qinputmethod_p.h
+++ b/src/gui/kernel/qinputmethod_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qkeymapper.cpp b/src/gui/kernel/qkeymapper.cpp
index 0e150a9c1e..b5189fb526 100644
--- a/src/gui/kernel/qkeymapper.cpp
+++ b/src/gui/kernel/qkeymapper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,6 +37,9 @@
 #include <private/qobject_p.h>
 #include "qkeymapper_p.h"
 
+#include <private/qguiapplication_p.h>
+#include <qpa/qplatformintegration.h>
+
 QT_BEGIN_NAMESPACE
 
 /*!
@@ -117,4 +112,32 @@ QKeyMapperPrivate *qt_keymapper_private()
     return QKeyMapper::instance()->d_func();
 }
 
+QKeyMapperPrivate::QKeyMapperPrivate()
+{
+    keyboardInputLocale = QLocale::system();
+    keyboardInputDirection = keyboardInputLocale.textDirection();
+}
+
+QKeyMapperPrivate::~QKeyMapperPrivate()
+{
+    // clearMappings();
+}
+
+void QKeyMapperPrivate::clearMappings()
+{
+}
+
+QList<int> QKeyMapperPrivate::possibleKeys(QKeyEvent *e)
+{
+    QList<int> result = QGuiApplicationPrivate::platformIntegration()->possibleKeys(e);
+    if (!result.isEmpty())
+        return result;
+
+    if (e->key() && (e->key() != Qt::Key_unknown))
+        result << int(e->key() + e->modifiers());
+    else if (!e->text().isEmpty())
+        result << int(e->text().at(0).unicode() + e->modifiers());
+    return result;
+}
+
 QT_END_NAMESPACE
diff --git a/src/gui/kernel/qkeymapper_p.h b/src/gui/kernel/qkeymapper_p.h
index 69e7addf8a..24b83b7670 100644
--- a/src/gui/kernel/qkeymapper_p.h
+++ b/src/gui/kernel/qkeymapper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qkeymapper_qpa.cpp b/src/gui/kernel/qkeymapper_qpa.cpp
deleted file mode 100644
index 3966909db1..0000000000
--- a/src/gui/kernel/qkeymapper_qpa.cpp
+++ /dev/null
@@ -1,82 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qkeymapper_p.h"
-#include <qdebug.h>
-#include <private/qevent_p.h>
-#include <private/qlocale_p.h>
-#include <private/qguiapplication_p.h>
-#include <qpa/qplatformintegration.h>
-
-QT_BEGIN_NAMESPACE
-
-QT_USE_NAMESPACE
-
-
-QKeyMapperPrivate::QKeyMapperPrivate()
-{
-    keyboardInputLocale = QLocale::system();
-    keyboardInputDirection = keyboardInputLocale.textDirection();
-}
-
-QKeyMapperPrivate::~QKeyMapperPrivate()
-{
-    // clearMappings();
-}
-
-void QKeyMapperPrivate::clearMappings()
-{
-}
-
-QList<int> QKeyMapperPrivate::possibleKeys(QKeyEvent *e)
-{
-    QList<int> result = QGuiApplicationPrivate::platformIntegration()->possibleKeys(e);
-    if (!result.isEmpty())
-        return result;
-
-    if (e->key() && (e->key() != Qt::Key_unknown))
-        result << int(e->key() + e->modifiers());
-    else if (!e->text().isEmpty())
-        result << int(e->text().at(0).unicode() + e->modifiers());
-    return result;
-}
-
-QT_END_NAMESPACE
diff --git a/src/gui/kernel/qkeysequence.cpp b/src/gui/kernel/qkeysequence.cpp
index 59cdabbc0f..209d1dd499 100644
--- a/src/gui/kernel/qkeysequence.cpp
+++ b/src/gui/kernel/qkeysequence.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -490,7 +482,7 @@ static const struct {
     { Qt::Key_BrightnessAdjust,           QT_TRANSLATE_NOOP("QShortcut", "Adjust Brightness") },
     { Qt::Key_Finance,                    QT_TRANSLATE_NOOP("QShortcut", "Finance") },
     { Qt::Key_Community,                  QT_TRANSLATE_NOOP("QShortcut", "Community") },
-    { Qt::Key_AudioRewind,                QT_TRANSLATE_NOOP("QShortcut", "Audio Rewind") },
+    { Qt::Key_AudioRewind,                QT_TRANSLATE_NOOP("QShortcut", "Media Rewind") },
     { Qt::Key_BackForward,                QT_TRANSLATE_NOOP("QShortcut", "Back Forward") },
     { Qt::Key_ApplicationLeft,            QT_TRANSLATE_NOOP("QShortcut", "Application Left") },
     { Qt::Key_ApplicationRight,           QT_TRANSLATE_NOOP("QShortcut", "Application Right") },
@@ -550,17 +542,40 @@ static const struct {
     { Qt::Key_Bluetooth,                  QT_TRANSLATE_NOOP("QShortcut", "Bluetooth") },
     { Qt::Key_WLAN,                       QT_TRANSLATE_NOOP("QShortcut", "Wireless") },
     { Qt::Key_UWB,                        QT_TRANSLATE_NOOP("QShortcut", "Ultra Wide Band") },
-    { Qt::Key_AudioForward,               QT_TRANSLATE_NOOP("QShortcut", "Audio Forward") },
+    { Qt::Key_AudioForward,               QT_TRANSLATE_NOOP("QShortcut", "Media Fast Forward") },
     { Qt::Key_AudioRepeat,                QT_TRANSLATE_NOOP("QShortcut", "Audio Repeat") },
     { Qt::Key_AudioRandomPlay,            QT_TRANSLATE_NOOP("QShortcut", "Audio Random Play") },
     { Qt::Key_Subtitle,                   QT_TRANSLATE_NOOP("QShortcut", "Subtitle") },
     { Qt::Key_AudioCycleTrack,            QT_TRANSLATE_NOOP("QShortcut", "Audio Cycle Track") },
     { Qt::Key_Time,                       QT_TRANSLATE_NOOP("QShortcut", "Time") },
-    { Qt::Key_Select,                     QT_TRANSLATE_NOOP("QShortcut", "Select") },
+    { Qt::Key_Hibernate,                  QT_TRANSLATE_NOOP("QShortcut", "Hibernate") },
     { Qt::Key_View,                       QT_TRANSLATE_NOOP("QShortcut", "View") },
     { Qt::Key_TopMenu,                    QT_TRANSLATE_NOOP("QShortcut", "Top Menu") },
+    { Qt::Key_PowerDown,                  QT_TRANSLATE_NOOP("QShortcut", "Power Down") },
     { Qt::Key_Suspend,                    QT_TRANSLATE_NOOP("QShortcut", "Suspend") },
-    { Qt::Key_Hibernate,                  QT_TRANSLATE_NOOP("QShortcut", "Hibernate") },
+
+    { Qt::Key_MicMute,                    QT_TRANSLATE_NOOP("QShortcut", "Microphone Mute") },
+
+    { Qt::Key_Red,                        QT_TRANSLATE_NOOP("QShortcut", "Red") },
+    { Qt::Key_Green,                      QT_TRANSLATE_NOOP("QShortcut", "Green") },
+    { Qt::Key_Yellow,                     QT_TRANSLATE_NOOP("QShortcut", "Yellow") },
+    { Qt::Key_Blue,                       QT_TRANSLATE_NOOP("QShortcut", "Blue") },
+
+    { Qt::Key_ChannelUp,                  QT_TRANSLATE_NOOP("QShortcut", "Channel Up") },
+    { Qt::Key_ChannelDown,                QT_TRANSLATE_NOOP("QShortcut", "Channel Down") },
+
+    { Qt::Key_Guide,                      QT_TRANSLATE_NOOP("QShortcut", "Guide") },
+    { Qt::Key_Info,                       QT_TRANSLATE_NOOP("QShortcut", "Info") },
+    { Qt::Key_Settings,                   QT_TRANSLATE_NOOP("QShortcut", "Settings") },
+
+    { Qt::Key_MicVolumeUp,                QT_TRANSLATE_NOOP("QShortcut", "Microphone Volume Up") },
+    { Qt::Key_MicVolumeDown,              QT_TRANSLATE_NOOP("QShortcut", "Microphone Volume Down") },
+
+    { Qt::Key_New,                        QT_TRANSLATE_NOOP("QShortcut", "New") },
+    { Qt::Key_Open,                       QT_TRANSLATE_NOOP("QShortcut", "Open") },
+    { Qt::Key_Find,                       QT_TRANSLATE_NOOP("QShortcut", "Find") },
+    { Qt::Key_Undo,                       QT_TRANSLATE_NOOP("QShortcut", "Undo") },
+    { Qt::Key_Redo,                       QT_TRANSLATE_NOOP("QShortcut", "Redo") },
 
     // --------------------------------------------------------------
     // More consistent namings
@@ -647,6 +662,7 @@ static const struct {
     { Qt::Key_Execute,  QT_TRANSLATE_NOOP("QShortcut", "Execute") },
     { Qt::Key_Play,  QT_TRANSLATE_NOOP("QShortcut", "Play") },
     { Qt::Key_Zoom,  QT_TRANSLATE_NOOP("QShortcut", "Zoom") },
+    { Qt::Key_Exit,  QT_TRANSLATE_NOOP("QShortcut", "Exit") },
 
     { 0, 0 }
 };
diff --git a/src/gui/kernel/qkeysequence.h b/src/gui/kernel/qkeysequence.h
index 1c0ff6ca2c..5a2ce5a8b9 100644
--- a/src/gui/kernel/qkeysequence.h
+++ b/src/gui/kernel/qkeysequence.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qkeysequence_p.h b/src/gui/kernel/qkeysequence_p.h
index 3751660500..2eed275e32 100644
--- a/src/gui/kernel/qkeysequence_p.h
+++ b/src/gui/kernel/qkeysequence_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qoffscreensurface.cpp b/src/gui/kernel/qoffscreensurface.cpp
index 003e3a0cc9..56c4fbbf8b 100644
--- a/src/gui/kernel/qoffscreensurface.cpp
+++ b/src/gui/kernel/qoffscreensurface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -90,6 +82,7 @@ public:
         , surfaceType(QSurface::OpenGLSurface)
         , platformOffscreenSurface(0)
         , offscreenWindow(0)
+        , requestedFormat(QSurfaceFormat::defaultFormat())
         , screen(0)
         , size(1, 1)
     {
diff --git a/src/gui/kernel/qoffscreensurface.h b/src/gui/kernel/qoffscreensurface.h
index a1b46f9b88..a4ba51320b 100644
--- a/src/gui/kernel/qoffscreensurface.h
+++ b/src/gui/kernel/qoffscreensurface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qopenglcontext.cpp b/src/gui/kernel/qopenglcontext.cpp
index 406c784c5c..8b2378788f 100644
--- a/src/gui/kernel/qopenglcontext.cpp
+++ b/src/gui/kernel/qopenglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,6 +55,7 @@
 
 #ifndef QT_OPENGL_ES_2
 #include <QOpenGLFunctions_1_0>
+#include <QOpenGLFunctions_3_2_Core>
 #endif
 
 QT_BEGIN_NAMESPACE
@@ -242,6 +235,28 @@ QMutex QOpenGLContextPrivate::makeCurrentTrackerMutex;
 #endif
 
 /*!
+    \internal
+
+    This function is used by Qt::AA_ShareOpenGLContexts and the Qt
+    WebEngine to set up context sharing across multiple windows. Do
+    not use it for any other purpose.
+
+    Please maintain the binary compatibility of these functions.
+*/
+void qt_gl_set_global_share_context(QOpenGLContext *context)
+{
+    global_share_context = context;
+}
+
+/*!
+    \internal
+*/
+QOpenGLContext *qt_gl_global_share_context()
+{
+    return global_share_context;
+}
+
+/*!
     \class QOpenGLContext
     \inmodule QtGui
     \since 5.0
@@ -282,7 +297,7 @@ QMutex QOpenGLContextPrivate::makeCurrentTrackerMutex;
     For an example of how to use QOpenGLContext see the
     \l{OpenGL Window Example}{OpenGL Window} example.
 
-    \section1 Thread affinity
+    \section1 Thread Affinity
 
     QOpenGLContext can be moved to a different thread with moveToThread(). Do
     not call makeCurrent() from a different thread than the one to which the
@@ -290,7 +305,7 @@ QMutex QOpenGLContextPrivate::makeCurrentTrackerMutex;
     and against one surface at a time, and a thread only has one context
     current at a time.
 
-    \section1 Context resource sharing
+    \section1 Context Resource Sharing
 
     Resources, such as framebuffer objects, textures, and vertex buffer objects
     can be shared between contexts.  Use setShareContext() before calling
@@ -302,7 +317,7 @@ QMutex QOpenGLContextPrivate::makeCurrentTrackerMutex;
     the share group. A non-sharing context has a share group consisting of a
     single context.
 
-    \section1 Default framebuffer
+    \section1 Default Framebuffer
 
     On certain platforms, a framebuffer other than 0 might be the default frame
     buffer depending on the current surface. Instead of calling
@@ -335,23 +350,14 @@ QOpenGLContext *QOpenGLContextPrivate::setCurrentContext(QOpenGLContext *context
     return previous;
 }
 
-/*!
-    \internal
-
-    This function is used by the Qt WebEngine to set up context sharing
-    across multiple windows. Do not use it for any other purpose.
-*/
 void QOpenGLContextPrivate::setGlobalShareContext(QOpenGLContext *context)
 {
-    global_share_context = context;
+    qt_gl_set_global_share_context(context);
 }
 
-/*!
-    \internal
-*/
 QOpenGLContext *QOpenGLContextPrivate::globalShareContext()
 {
-    return global_share_context;
+    return qt_gl_global_share_context();
 }
 
 int QOpenGLContextPrivate::maxTextureSize()
@@ -370,9 +376,25 @@ int QOpenGLContextPrivate::maxTextureSize()
         GLint size;
         GLint next = 64;
         funcs->glTexImage2D(proxy, 0, GL_RGBA, next, next, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
-        QOpenGLFunctions_1_0 *gl1funcs = q->versionFunctions<QOpenGLFunctions_1_0>();
-        gl1funcs->initializeOpenGLFunctions();
-        gl1funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &size);
+
+        QOpenGLFunctions_1_0 *gl1funcs = 0;
+        QOpenGLFunctions_3_2_Core *gl3funcs = 0;
+
+        if (q->format().profile() == QSurfaceFormat::CoreProfile) {
+            gl3funcs = q->versionFunctions<QOpenGLFunctions_3_2_Core>();
+            gl3funcs->initializeOpenGLFunctions();
+        } else {
+            gl1funcs = q->versionFunctions<QOpenGLFunctions_1_0>();
+            gl1funcs->initializeOpenGLFunctions();
+        }
+
+        Q_ASSERT(gl1funcs || gl3funcs);
+
+        if (gl1funcs)
+            gl1funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &size);
+        else
+            gl3funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &size);
+
         if (size == 0) {
             return max_texture_size;
         }
@@ -383,7 +405,11 @@ int QOpenGLContextPrivate::maxTextureSize()
             if (next > max_texture_size)
                 break;
             funcs->glTexImage2D(proxy, 0, GL_RGBA, next, next, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
-            gl1funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &next);
+            if (gl1funcs)
+                gl1funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &next);
+            else
+                gl3funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &next);
+
         } while (next > size);
 
         max_texture_size = size;
@@ -456,6 +482,12 @@ QOpenGLContext::QOpenGLContext(QObject *parent)
 /*!
     Sets the \a format the OpenGL context should be compatible with. You need
     to call create() before it takes effect.
+
+    When the format is not explicitly set via this function, the format returned
+    by QSurfaceFormat::defaultFormat() will be used. This means that when having
+    multiple contexts, individual calls to this function can be replaced by one
+    single call to QSurfaceFormat::setDefaultFormat() before creating the first
+    context.
 */
 void QOpenGLContext::setFormat(const QSurfaceFormat &format)
 {
@@ -486,6 +518,64 @@ void QOpenGLContext::setScreen(QScreen *screen)
 }
 
 /*!
+    Set the native handles for this context. When create() is called and a
+    native handle is set, configuration settings, like format(), are ignored
+    since this QOpenGLContext will wrap an already created native context
+    instead of creating a new one from scratch.
+
+    On some platforms the native context handle is not sufficient and other
+    related handles (for example, for a window or display) have to be provided
+    in addition. Therefore \a handle is variant containing a platform-specific
+    value type. These classes can be found in the QtPlatformHeaders module.
+
+    When create() is called with native handles set, the handles' ownership are
+    not taken, meaning that destroy() will not destroy the native context.
+
+    \note Some frameworks track the current context and surfaces internally.
+    Making the adopted QOpenGLContext current via Qt will have no effect on such
+    other frameworks' internal state. Therefore a subsequent makeCurrent done
+    via the other framework may have no effect. It is therefore advisable to
+    make explicit calls to make no context and surface current to reset the
+    other frameworks' internal state after performing OpenGL operations via Qt.
+
+    \note Using foreign contexts with Qt windows and Qt contexts with windows
+    and surfaces created by other frameworks may give unexpected results,
+    depending on the platform, due to potential mismatches in context and window
+    pixel formats. To make sure this does not happen, avoid making contexts and
+    surfaces from different frameworks current together. Instead, prefer
+    approaches based on context sharing where OpenGL resources like textures are
+    accessible both from Qt's and the foreign framework's contexts.
+
+    \since 5.4
+    \sa nativeHandle()
+*/
+void QOpenGLContext::setNativeHandle(const QVariant &handle)
+{
+    Q_D(QOpenGLContext);
+    d->nativeHandle = handle;
+}
+
+/*!
+    Returns the native handle for the context.
+
+    This function provides access to the QOpenGLContext's underlying native
+    context. The returned variant contains a platform-specific value type. These
+    classes can be found in the module QtPlatformHeaders.
+
+    On platforms where retrieving the native handle is not supported, or if
+    neither create() nor setNativeHandle() was called, a null variant is
+    returned.
+
+    \since 5.4
+    \sa setNativeHandle()
+ */
+QVariant QOpenGLContext::nativeHandle() const
+{
+    Q_D(const QOpenGLContext);
+    return d->nativeHandle;
+}
+
+/*!
     Attempts to create the OpenGL context with the current configuration.
 
     The current configuration includes the format, the share context, and the
@@ -502,11 +592,15 @@ void QOpenGLContext::setScreen(QScreen *screen)
     Returns \c true if the native context was successfully created and is ready to
     be used with makeCurrent(), swapBuffers(), etc.
 
+    \note If the context is already created, this function will first call
+    destroy(), and then create a new OpenGL context.
+
     \sa makeCurrent(), destroy(), format()
 */
 bool QOpenGLContext::create()
 {
-    destroy();
+    if (isValid())
+        destroy();
 
     Q_D(QOpenGLContext);
     d->platformGLContext = QGuiApplicationPrivate::platformIntegration()->createPlatformOpenGLContext(this);
@@ -557,6 +651,7 @@ void QOpenGLContext::destroy()
     d->versionFunctionsBackend.clear();
     delete d->textureFunctions;
     d->textureFunctions = 0;
+    d->nativeHandle = QVariant();
 }
 
 /*!
diff --git a/src/gui/kernel/qopenglcontext.h b/src/gui/kernel/qopenglcontext.h
index 19aecee75a..b31cc693b7 100644
--- a/src/gui/kernel/qopenglcontext.h
+++ b/src/gui/kernel/qopenglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,6 +56,7 @@
 
 #include <QtCore/qhash.h>
 #include <QtCore/qpair.h>
+#include <QtCore/qvariant.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -153,6 +146,7 @@ public:
     void setFormat(const QSurfaceFormat &format);
     void setShareContext(QOpenGLContext *shareContext);
     void setScreen(QScreen *screen);
+    void setNativeHandle(const QVariant &handle);
 
     bool create();
     bool isValid() const;
@@ -161,6 +155,7 @@ public:
     QOpenGLContext *shareContext() const;
     QOpenGLContextGroup *shareGroup() const;
     QScreen *screen() const;
+    QVariant nativeHandle() const;
 
     GLuint defaultFramebufferObject() const;
 
@@ -242,4 +237,4 @@ QT_END_NAMESPACE
 
 #endif // QT_NO_OPENGL
 
-#endif // QGUIGLCONTEXT_H
+#endif // QOPENGLCONTEXT_H
diff --git a/src/gui/kernel/qopenglcontext_p.h b/src/gui/kernel/qopenglcontext_p.h
index e9907480f2..7c45737d0a 100644
--- a/src/gui/kernel/qopenglcontext_p.h
+++ b/src/gui/kernel/qopenglcontext_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -206,13 +198,13 @@ public:
         , surface(0)
         , functions(0)
         , textureFunctions(0)
-        , current_fbo(0)
         , max_texture_size(-1)
         , workaround_brokenFBOReadBack(false)
         , workaround_brokenTexSubImage(false)
         , workaround_missingPrecisionQualifiers(false)
         , active_engine(0)
     {
+        requestedFormat = QSurfaceFormat::defaultFormat();
     }
 
     virtual ~QOpenGLContextPrivate()
@@ -237,7 +229,6 @@ public:
     mutable QSet<QByteArray> extensionNames;
     QOpenGLTextureHelper* textureFunctions;
 
-    GLuint current_fbo;
     GLint max_texture_size;
 
     bool workaround_brokenFBOReadBack;
@@ -246,6 +237,8 @@ public:
 
     QPaintEngineEx *active_engine;
 
+    QVariant nativeHandle;
+
     static QOpenGLContext *setCurrentContext(QOpenGLContext *context);
 
     static void setGlobalShareContext(QOpenGLContext *context);
@@ -276,6 +269,9 @@ public:
 #endif
 };
 
+Q_GUI_EXPORT void qt_gl_set_global_share_context(QOpenGLContext *context);
+Q_GUI_EXPORT QOpenGLContext *qt_gl_global_share_context();
+
 QT_END_NAMESPACE
 
 #endif // QT_NO_OPENGL
diff --git a/src/gui/kernel/qopenglwindow.cpp b/src/gui/kernel/qopenglwindow.cpp
new file mode 100644
index 0000000000..2b6692c461
--- /dev/null
+++ b/src/gui/kernel/qopenglwindow.cpp
@@ -0,0 +1,614 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qopenglwindow.h"
+#include "qpaintdevicewindow_p.h"
+#include <QtGui/QOpenGLFramebufferObject>
+#include <QtGui/QOpenGLPaintDevice>
+#include <QtGui/QOpenGLFunctions>
+#include <QtGui/private/qopengltextureblitter_p.h>
+#include <QtGui/private/qopenglextensions_p.h>
+#include <QtGui/QMatrix4x4>
+#include <QtGui/QOffscreenSurface>
+
+QT_BEGIN_NAMESPACE
+
+/*!
+  \class QOpenGLWindow
+  \inmodule QtGui
+  \since 5.4
+  \brief The QOpenGLWindow class is a convenience subclass of QWindow to perform OpenGL painting.
+
+  QOpenGLWindow is an enhanced QWindow that allows easily creating windows that
+  perform OpenGL rendering using an API that is compatible with QOpenGLWidget
+  and is similar to the legacy QGLWidget. Unlike QOpenGLWidget, QOpenGLWindow
+  has no dependency on the widgets module and offers better performance.
+
+  A typical application will subclass QOpenGLWindow and reimplement the following
+  virtual functions:
+
+  \list
+
+  \li initializeGL() to perform OpenGL resource initialization
+
+  \li resizeGL() to set up the transformation matrices and other window size dependent resources
+
+  \li paintGL() to issue OpenGL commands or draw using QPainter
+
+  \endlist
+
+  To schedule a repaint, call the update() function. Note that this will not
+  immediately result in a call to paintGL(). Calling update() multiple times in
+  a row will not change the behavior in any way.
+
+  This is a slot so it can be connected to a \l QTimer::timeout() signal to
+  perform animation. Note however that in the modern OpenGL world it is a much
+  better choice to rely on synchronization to the vertical refresh rate of the
+  display. See \l{QSurfaceFormat::setSwapInterval()}{setSwapInterval()} on a
+  description of the swap interval. With a swap interval of \c 1, which is the
+  case on most systems by default, the
+  \l{QOpenGLContext::swapBuffers()}{swapBuffers()} call, that is executed
+  internally by QOpenGLWindow after each repaint, will block and wait for
+  vsync. This means that whenever the swap is done, an update can be scheduled
+  again by calling update(), without relying on timers.
+
+  To request a specific configuration for the context, use setFormat()
+  like for any other QWindow. This allows, among others, requesting a
+  given OpenGL version and profile, or enabling depth and stencil
+  buffers.
+
+  Unlike QWindow, QOpenGLWindow allows opening a painter on itself and perform
+  QPainter-based drawing.
+
+  QOpenGLWindow supports multiple update behaviors. The default,
+  \c NoPartialUpdate is equivalent to a regular, OpenGL-based QWindow or the
+  legacy QGLWidget. In contrast, \c PartialUpdateBlit and \c PartialUpdateBlend are
+  more in line with QOpenGLWidget's way of working, where there is always an
+  extra, dedicated framebuffer object present. These modes allow, by
+  sacrificing some performance, redrawing only a smaller area on each paint and
+  having the rest of the content preserved from of the previous frame. This is
+  useful for applications than render incrementally using QPainter, because
+  this way they do not have to redraw the entire window content on each
+  paintGL() call.
+
+  For more information on graphics in Qt, see \l {Graphics}.
+ */
+
+/*!
+  \enum QOpenGLWindow::UpdateBehavior
+
+  This enum describes the update strategy of the QOpenGLWindow.
+
+  \value NoPartialUpdate Indicates that the entire window surface will
+  redrawn on each update and so no additional framebuffers are needed.
+  This is the setting used in most cases and is equivalent to how drawing
+  directly via QWindow would function.
+
+  \value PartialUpdateBlit Indicates that the drawing performed in paintGL()
+  does not cover the entire window. In this case an extra framebuffer object
+  is created under the hood, and rendering performed in paintGL() will target
+  this framebuffer. This framebuffer is then blitted onto the window surface's
+  default framebuffer after each paint. This allows having QPainter-based drawing
+  code in paintGL() which only repaints a smaller area at a time, because, unlike
+  NoPartialUpdate, the previous content is preserved.
+
+  \value PartialUpdateBlend Similar to PartialUpdateBlit, but instead of using
+  framebuffer blits, the contents of the extra framebuffer is rendered by
+  drawing a textured quad with blending enabled. This, unlike PartialUpdateBlit,
+  allows alpha blended content and works even when the glBlitFramebuffer is
+  not available. Performance-wise this setting is likely to be somewhat slower
+  than PartialUpdateBlit.
+ */
+
+/*!
+    \fn void QOpenGLWindow::frameSwapped()
+
+    This signal is emitted after the potentially blocking
+    \l{QOpenGLContext::swapBuffers()}{buffer swap} has been done. Applications
+    that wish to continuously repaint synchronized to the vertical refresh,
+    should issue an update() upon this signal. This allows for a much smoother
+    experience compared to the traditional usage of timers.
+*/
+
+// GLES2 builds won't have these constants with the suffixless names
+#ifndef GL_READ_FRAMEBUFFER
+#define GL_READ_FRAMEBUFFER 0x8CA8
+#endif
+#ifndef GL_DRAW_FRAMEBUFFER
+#define GL_DRAW_FRAMEBUFFER 0x8CA9
+#endif
+
+class QOpenGLWindowPaintDevice : public QOpenGLPaintDevice
+{
+public:
+    QOpenGLWindowPaintDevice(QOpenGLWindow *window) : m_window(window) { }
+    void ensureActiveTarget() Q_DECL_OVERRIDE;
+
+    QOpenGLWindow *m_window;
+};
+
+class QOpenGLWindowPrivate : public QPaintDeviceWindowPrivate
+{
+    Q_DECLARE_PUBLIC(QOpenGLWindow)
+public:
+    QOpenGLWindowPrivate(QOpenGLWindow::UpdateBehavior updateBehavior)
+        : updateBehavior(updateBehavior)
+        , hasFboBlit(false)
+    {
+    }
+
+    ~QOpenGLWindowPrivate()
+    {
+        Q_Q(QOpenGLWindow);
+        if (q->isValid()) {
+            q->makeCurrent(); // this works even when the platformwindow is destroyed
+            paintDevice.reset(0);
+            fbo.reset(0);
+            blitter.destroy();
+            q->doneCurrent();
+        }
+    }
+
+    static QOpenGLWindowPrivate *get(QOpenGLWindow *w) { return w->d_func(); }
+
+    void bindFBO()
+    {
+        if (updateBehavior > QOpenGLWindow::NoPartialUpdate)
+            fbo->bind();
+        else
+            QOpenGLFramebufferObject::bindDefault();
+    }
+
+    void beginPaint(const QRegion &region) Q_DECL_OVERRIDE
+    {
+        Q_UNUSED(region);
+        Q_Q(QOpenGLWindow);
+
+        if (!context) {
+            context.reset(new QOpenGLContext);
+            context->setFormat(q->requestedFormat());
+            if (!context->create())
+                qWarning("QOpenGLWindow::beginPaint: Failed to create context");
+            if (!context->makeCurrent(q))
+                qWarning("QOpenGLWindow::beginPaint: Failed to make context current");
+
+            paintDevice.reset(new QOpenGLWindowPaintDevice(q));
+            if (updateBehavior == QOpenGLWindow::PartialUpdateBlit)
+                hasFboBlit = QOpenGLFramebufferObject::hasOpenGLFramebufferBlit();
+
+            q->initializeGL();
+        } else {
+            context->makeCurrent(q);
+        }
+
+        if (updateBehavior > QOpenGLWindow::NoPartialUpdate) {
+            if (!fbo || fbo->size() != q->size() * q->devicePixelRatio()) {
+                QOpenGLFramebufferObjectFormat fboFormat;
+                fboFormat.setAttachment(QOpenGLFramebufferObject::CombinedDepthStencil);
+                if (q->requestedFormat().samples() > 0) {
+                    if (updateBehavior != QOpenGLWindow::PartialUpdateBlend)
+                        fboFormat.setSamples(q->requestedFormat().samples());
+                    else
+                        qWarning("QOpenGLWindow: PartialUpdateBlend does not support multisampling");
+                }
+                fbo.reset(new QOpenGLFramebufferObject(q->size() * q->devicePixelRatio(), fboFormat));
+                markWindowAsDirty();
+            }
+        } else {
+            markWindowAsDirty();
+        }
+
+        const int deviceWidth = q->width() * q->devicePixelRatio();
+        const int deviceHeight = q->height() * q->devicePixelRatio();
+        paintDevice->setSize(QSize(deviceWidth, deviceHeight));
+        paintDevice->setDevicePixelRatio(q->devicePixelRatio());
+        context->functions()->glViewport(0, 0, deviceWidth, deviceHeight);
+
+        context->functions()->glBindFramebuffer(GL_FRAMEBUFFER, context->defaultFramebufferObject());
+
+        q->paintUnderGL();
+
+        if (updateBehavior > QOpenGLWindow::NoPartialUpdate)
+            fbo->bind();
+    }
+
+    void endPaint() Q_DECL_OVERRIDE
+    {
+        Q_Q(QOpenGLWindow);
+
+        if (updateBehavior > QOpenGLWindow::NoPartialUpdate)
+            fbo->release();
+
+        context->functions()->glBindFramebuffer(GL_FRAMEBUFFER, context->defaultFramebufferObject());
+
+        if (updateBehavior == QOpenGLWindow::PartialUpdateBlit && hasFboBlit) {
+            QOpenGLExtensions extensions(context.data());
+            extensions.glBindFramebuffer(GL_READ_FRAMEBUFFER, fbo->handle());
+            extensions.glBindFramebuffer(GL_DRAW_FRAMEBUFFER, context->defaultFramebufferObject());
+            extensions.glBlitFramebuffer(0, 0, q->width(), q->height(),
+                                         0, 0, q->width(), q->height(),
+                                         GL_COLOR_BUFFER_BIT, GL_NEAREST);
+        } else if (updateBehavior > QOpenGLWindow::NoPartialUpdate) {
+            if (updateBehavior == QOpenGLWindow::PartialUpdateBlend) {
+                context->functions()->glEnable(GL_BLEND);
+                context->functions()->glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+            }
+            if (!blitter.isCreated())
+                blitter.create();
+
+            QRect windowRect(QPoint(0, 0), fbo->size());
+            QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(windowRect, windowRect);
+            blitter.bind();
+            blitter.blit(fbo->texture(), target, QOpenGLTextureBlitter::OriginBottomLeft);
+            blitter.release();
+
+            if (updateBehavior == QOpenGLWindow::PartialUpdateBlend)
+                context->functions()->glDisable(GL_BLEND);
+        }
+
+        q->paintOverGL();
+    }
+
+    void flush(const QRegion &region) Q_DECL_OVERRIDE
+    {
+        Q_UNUSED(region);
+        Q_Q(QOpenGLWindow);
+        context->swapBuffers(q);
+        emit q->frameSwapped();
+    }
+
+    QOpenGLWindow::UpdateBehavior updateBehavior;
+    bool hasFboBlit;
+    QScopedPointer<QOpenGLContext> context;
+    QScopedPointer<QOpenGLFramebufferObject> fbo;
+    QScopedPointer<QOpenGLWindowPaintDevice> paintDevice;
+    QOpenGLTextureBlitter blitter;
+    QColor backgroundColor;
+    QScopedPointer<QOffscreenSurface> offscreenSurface;
+};
+
+void QOpenGLWindowPaintDevice::ensureActiveTarget()
+{
+    QOpenGLWindowPrivate::get(m_window)->bindFBO();
+}
+
+/*!
+  Constructs a new QOpenGLWindow with the given \a parent and \a updateBehavior.
+
+  \sa QOpenGLWindow::UpdateBehavior
+ */
+QOpenGLWindow::QOpenGLWindow(QOpenGLWindow::UpdateBehavior updateBehavior, QWindow *parent)
+    : QPaintDeviceWindow(*(new QOpenGLWindowPrivate(updateBehavior)), parent)
+{
+    setSurfaceType(QSurface::OpenGLSurface);
+}
+
+/*!
+  \return the update behavior for this QOpenGLWindow.
+*/
+QOpenGLWindow::UpdateBehavior QOpenGLWindow::updateBehavior() const
+{
+    Q_D(const QOpenGLWindow);
+    return d->updateBehavior;
+}
+
+/*!
+  \return \c true if the window's OpenGL resources, like the context, have
+  been successfully initialized. Note that the return value is always \c false
+  until the window becomes exposed (shown).
+*/
+bool QOpenGLWindow::isValid() const
+{
+    Q_D(const QOpenGLWindow);
+    return d->context && d->context->isValid();
+}
+
+/*!
+  Prepares for rendering OpenGL content for this window by making the
+  corresponding context current and binding the framebuffer object, if there is
+  one, in that context context.
+
+  It is not necessary to call this function in most cases, because it is called
+  automatically before invoking paintGL(). It is provided nonetheless to support
+  advanced, multi-threaded scenarios where a thread different than the GUI or main
+  thread may want to update the surface or framebuffer contents. See QOpenGLContext
+  for more information on threading related issues.
+
+  This function is suitable for calling also when the underlying platform window
+  is already destroyed. This means that it is safe to call this function from
+  a QOpenGLWindow subclass' destructor. If there is no native window anymore,
+  an offscreen surface is used instead. This ensures that OpenGL resource
+  cleanup operations in the destructor will always work, as long as
+  this function is called first.
+
+  \sa QOpenGLContext, context(), paintGL(), doneCurrent()
+ */
+void QOpenGLWindow::makeCurrent()
+{
+    Q_D(QOpenGLWindow);
+
+    if (!isValid())
+        return;
+
+    // The platform window may be destroyed at this stage and therefore
+    // makeCurrent() may not safely be called with 'this'.
+    if (handle()) {
+        d->context->makeCurrent(this);
+    } else {
+        if (!d->offscreenSurface) {
+            d->offscreenSurface.reset(new QOffscreenSurface);
+            d->offscreenSurface->setFormat(d->context->format());
+            d->offscreenSurface->create();
+        }
+        d->context->makeCurrent(d->offscreenSurface.data());
+    }
+
+    d->bindFBO();
+}
+
+/*!
+  Releases the context.
+
+  It is not necessary to call this function in most cases, since the widget
+  will make sure the context is bound and released properly when invoking
+  paintGL().
+
+  \sa makeCurrent()
+ */
+void QOpenGLWindow::doneCurrent()
+{
+    Q_D(QOpenGLWindow);
+
+    if (!isValid())
+        return;
+
+    d->context->doneCurrent();
+}
+
+/*!
+  \return The QOpenGLContext used by this window or \c 0 if not yet initialized.
+ */
+QOpenGLContext *QOpenGLWindow::context() const
+{
+    Q_D(const QOpenGLWindow);
+    return d->context.data();
+}
+
+/*!
+  The framebuffer object handle used by this window.
+
+  When the update behavior is set to \c NoPartialUpdate, there is no separate
+  framebuffer object. In this case the returned value is the ID of the
+  default framebuffer.
+
+  Otherwise the value of the ID of the framebuffer object or \c 0 if not
+  yet initialized.
+ */
+GLuint QOpenGLWindow::defaultFramebufferObject() const
+{
+    Q_D(const QOpenGLWindow);
+    if (d->updateBehavior > NoPartialUpdate && d->fbo)
+        return d->fbo->handle();
+    else if (QOpenGLContext *ctx = QOpenGLContext::currentContext())
+        return ctx->defaultFramebufferObject();
+    else
+        return 0;
+}
+
+extern Q_GUI_EXPORT QImage qt_gl_read_framebuffer(const QSize &size, bool alpha_format, bool include_alpha);
+
+/*!
+  Returns a 32-bit RGB image of the framebuffer.
+
+  \note This is a potentially expensive operation because it relies on
+  glReadPixels() to read back the pixels. This may be slow and can stall the
+  GPU pipeline.
+
+  \note When used together with update behavior \c NoPartialUpdate, the returned
+  image may not contain the desired content when called after the front and back
+  buffers have been swapped (unless preserved swap is enabled in the underlying
+  windowing system interface). In this mode the function reads from the back
+  buffer and the contents of that may not match the content on the screen (the
+  front buffer). In this case the only place where this function can safely be
+  used is paintGL() or paintOverGL().
+ */
+QImage QOpenGLWindow::grabFramebuffer()
+{
+    if (!isValid())
+        return QImage();
+
+    makeCurrent();
+    return qt_gl_read_framebuffer(size() * devicePixelRatio(), false, false);
+}
+
+/*!
+  This virtual function is called once before the first call to paintGL() or
+  resizeGL(). Reimplement it in a subclass.
+
+  This function should set up any required OpenGL resources and state.
+
+  There is no need to call makeCurrent() because this has already been done
+  when this function is called. Note however that the framebuffer, in case
+  partial update mode is used, is not yet available at this stage, so avoid
+  issuing draw calls from here. Defer such calls to paintGL() instead.
+
+  \sa paintGL(), resizeGL()
+ */
+void QOpenGLWindow::initializeGL()
+{
+}
+
+/*!
+  This virtual function is called whenever the widget has been resized.
+  Reimplement it in a subclass. The new size is passed in \a w and \a h.
+
+  \note This is merely a convenience function in order to provide an API that is
+  compatible with QOpenGLWidget. Unlike with QOpenGLWidget, derived classes are
+  free to choose to override resizeEvent() instead of this function.
+
+  \note Avoid issuing OpenGL commands from this function as there may not be a
+  context current when it is invoked. If it cannot be avoided, call makeCurrent().
+
+  \note Scheduling updates from here is not necessary. The windowing systems
+  will send expose events that trigger an update automatically.
+
+  \sa initializeGL(), paintGL()
+ */
+void QOpenGLWindow::resizeGL(int w, int h)
+{
+    Q_UNUSED(w);
+    Q_UNUSED(h);
+}
+
+/*!
+  This virtual function is called whenever the window contents needs to be
+  painted. Reimplement it in a subclass.
+
+  There is no need to call makeCurrent() because this has already
+  been done when this function is called.
+
+  Before invoking this function, the context and the framebuffer, if there is
+  one, are bound, and the viewport is set up by a call to glViewport(). No
+  other state is set and no clearing or drawing is performed by the framework.
+
+  \note When using a partial update behavior, like \c PartialUpdateBlend, the
+  output of the previous paintGL() call is preserved and, after the additional
+  drawing perfomed in the current invocation of the function, the content is
+  blitted or blended over the content drawn directly to the window in
+  paintUnderGL().
+
+  \sa initializeGL(), resizeGL(), paintUnderGL(), paintOverGL(), UpdateBehavior
+ */
+void QOpenGLWindow::paintGL()
+{
+}
+
+/*!
+  The virtual function is called before each invocation of paintGL().
+
+  When the update mode is set to \c NoPartialUpdate, there is no difference
+  between this function and paintGL(), performing rendering in either of them
+  leads to the same result.
+
+  The difference becomes significant when using \c PartialUpdateBlend, where an
+  extra framebuffer object is used. There, paintGL() targets this additional
+  framebuffer object, which preserves its contents, while paintUnderGL() and
+  paintOverGL() target the default framebuffer, i.e. directly the window
+  surface, the contents of which is lost after each displayed frame.
+
+  \note Avoid relying on this function when the update behavior is
+  \c PartialUpdateBlit. This mode involves blitting the extra framebuffer used by
+  paintGL() onto the default framebuffer after each invocation of paintGL(),
+  thus overwriting all drawing generated in this function.
+
+  \sa paintGL(), paintOverGL(), UpdateBehavior
+ */
+void QOpenGLWindow::paintUnderGL()
+{
+}
+
+/*!
+  This virtual function is called after each invocation of paintGL().
+
+  When the update mode is set to NoPartialUpdate, there is no difference
+  between this function and paintGL(), performing rendering in either of them
+  leads to the same result.
+
+  Like paintUnderGL(), rendering in this function targets the default
+  framebuffer of the window, regardless of the update behavior. It gets called
+  after paintGL() has returned and the blit (PartialUpdateBlit) or quad drawing
+  (PartialUpdateBlend) has been done.
+
+  \sa paintGL(), paintUnderGL(), UpdateBehavior
+ */
+void QOpenGLWindow::paintOverGL()
+{
+}
+
+/*!
+  Paint \a event handler. Calls paintGL().
+
+  \sa paintGL()
+ */
+void QOpenGLWindow::paintEvent(QPaintEvent *event)
+{
+    Q_UNUSED(event);
+    paintGL();
+}
+
+/*!
+  Resize \a event handler. Calls resizeGL().
+
+  \sa resizeGL()
+ */
+void QOpenGLWindow::resizeEvent(QResizeEvent *event)
+{
+    Q_UNUSED(event);
+    resizeGL(width(), height());
+}
+
+/*!
+  \internal
+ */
+int QOpenGLWindow::metric(PaintDeviceMetric metric) const
+{
+    Q_D(const QOpenGLWindow);
+
+    switch (metric) {
+        case PdmDepth:
+            if (d->paintDevice)
+                return d->paintDevice->depth();
+            break;
+        case PdmDevicePixelRatio:
+            if (d->paintDevice)
+                return d->paintDevice->devicePixelRatio();
+            break;
+        default:
+            break;
+    }
+    return QPaintDeviceWindow::metric(metric);
+
+}
+
+/*!
+  \internal
+ */
+QPaintDevice *QOpenGLWindow::redirected(QPoint *) const
+{
+    Q_D(const QOpenGLWindow);
+    if (QOpenGLContext::currentContext() == d->context.data())
+        return d->paintDevice.data();
+    return 0;
+}
+
+QT_END_NAMESPACE
diff --git a/src/gui/kernel/qopenglwindow.h b/src/gui/kernel/qopenglwindow.h
new file mode 100644
index 0000000000..3b0b399b0a
--- /dev/null
+++ b/src/gui/kernel/qopenglwindow.h
@@ -0,0 +1,98 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QOPENGLWINDOW_H
+#define QOPENGLWINDOW_H
+
+#include <QtCore/qglobal.h>
+
+#ifndef QT_NO_OPENGL
+
+#include <QtGui/QPaintDeviceWindow>
+#include <QtGui/QOpenGLContext>
+#include <QtGui/QImage>
+
+QT_BEGIN_NAMESPACE
+
+class QOpenGLWindowPrivate;
+
+class Q_GUI_EXPORT QOpenGLWindow : public QPaintDeviceWindow
+{
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(QOpenGLWindow)
+
+public:
+    enum UpdateBehavior {
+        NoPartialUpdate,
+        PartialUpdateBlit,
+        PartialUpdateBlend
+    };
+
+    explicit QOpenGLWindow(UpdateBehavior updateBehavior = NoPartialUpdate, QWindow *parent = 0);
+
+    UpdateBehavior updateBehavior() const;
+    bool isValid() const;
+
+    void makeCurrent();
+    void doneCurrent();
+
+    QOpenGLContext *context() const;
+
+    GLuint defaultFramebufferObject() const;
+
+    QImage grabFramebuffer();
+
+Q_SIGNALS:
+    void frameSwapped();
+
+protected:
+    virtual void initializeGL();
+    virtual void resizeGL(int w, int h);
+    virtual void paintGL();
+    virtual void paintUnderGL();
+    virtual void paintOverGL();
+
+    void paintEvent(QPaintEvent *event) Q_DECL_OVERRIDE;
+    void resizeEvent(QResizeEvent *event) Q_DECL_OVERRIDE;
+    int metric(PaintDeviceMetric metric) const Q_DECL_OVERRIDE;
+    QPaintDevice *redirected(QPoint *) const Q_DECL_OVERRIDE;
+
+private:
+    Q_DISABLE_COPY(QOpenGLWindow)
+};
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_OPENGL
+
+#endif
diff --git a/src/gui/kernel/qpaintdevicewindow.cpp b/src/gui/kernel/qpaintdevicewindow.cpp
new file mode 100644
index 0000000000..cf8653426f
--- /dev/null
+++ b/src/gui/kernel/qpaintdevicewindow.cpp
@@ -0,0 +1,207 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qpaintdevicewindow_p.h"
+
+#include <QtGui/QGuiApplication>
+#include <QtGui/QScreen>
+
+QT_BEGIN_NAMESPACE
+
+/*!
+    \class QPaintDeviceWindow
+    \inmodule QtGui
+    \since 5.4
+    \brief Convenience subclass of QWindow that is also a QPaintDevice.
+
+    QPaintDeviceWindow is like a regular QWindow, with the added functionality
+    of being a paint device too. Whenever the content needs to be updated,
+    the virtual paintEvent() function is called. Subclasses, that reimplement
+    this function, can then simply open a QPainter on the window.
+
+    \note This class cannot directly be used in applications. It rather serves
+    as a base for subclasses like QOpenGLWindow.
+
+    \sa QOpenGLWindow
+*/
+
+/*!
+    Marks the entire window as dirty and schedules a repaint.
+
+    \note Subsequent calls to this function before the next paint
+    event will get ignored.
+*/
+void QPaintDeviceWindow::update()
+{
+    update(QRect(QPoint(0,0), size()));
+}
+
+/*!
+    Marks the \a rect of the window as dirty and schedules a repaint.
+
+    \note Subsequent calls to this function before the next paint
+    event will get ignored.
+*/
+void QPaintDeviceWindow::update(const QRect &rect)
+{
+    Q_D(QPaintDeviceWindow);
+    d->dirtyRegion += rect;
+    d->triggerUpdate();
+}
+
+/*!
+    Marks the \a region of the window as dirty and schedules a repaint.
+
+    \note Subsequent calls to this function before the next paint
+    event will get ignored.
+*/
+void QPaintDeviceWindow::update(const QRegion &region)
+{
+    Q_D(QPaintDeviceWindow);
+    d->dirtyRegion += region;
+    d->triggerUpdate();
+}
+
+/*!
+    Handles paint events passed in the \a event parameter.
+
+    The default implementation does nothing. Reimplement this function to
+    perform painting. If necessary, the dirty area is retrievable from
+    the \a event.
+*/
+void QPaintDeviceWindow::paintEvent(QPaintEvent *event)
+{
+    Q_UNUSED(event);
+    // Do nothing
+}
+
+/*!
+  \internal
+ */
+int QPaintDeviceWindow::metric(PaintDeviceMetric metric) const
+{
+    QScreen *screen = this->screen();
+    if (!screen && QGuiApplication::primaryScreen())
+        screen = QGuiApplication::primaryScreen();
+
+    switch (metric) {
+    case PdmWidth:
+        return width();
+    case PdmWidthMM:
+        if (screen)
+            return width() * screen->physicalSize().width() / screen->geometry().width();
+        break;
+    case PdmHeight:
+        return height();
+    case PdmHeightMM:
+        if (screen)
+            return height() * screen->physicalSize().height() / screen->geometry().height();
+        break;
+    case PdmDpiX:
+        if (screen)
+            return qRound(screen->logicalDotsPerInchX());
+        break;
+    case PdmDpiY:
+        if (screen)
+            return qRound(screen->logicalDotsPerInchY());
+        break;
+    case PdmPhysicalDpiX:
+        if (screen)
+            return qRound(screen->physicalDotsPerInchX());
+        break;
+    case PdmPhysicalDpiY:
+        if (screen)
+            return qRound(screen->physicalDotsPerInchY());
+        break;
+    case PdmDevicePixelRatio:
+        if (screen)
+            return screen->devicePixelRatio();
+        break;
+    default:
+        break;
+    }
+
+    return QPaintDevice::metric(metric);
+}
+
+/*!
+  \internal
+ */
+void QPaintDeviceWindow::exposeEvent(QExposeEvent *exposeEvent)
+{
+    Q_UNUSED(exposeEvent);
+    Q_D(QPaintDeviceWindow);
+    if (isExposed()) {
+        d->markWindowAsDirty();
+        // Do not rely on exposeEvent->region() as it has some issues for the
+        // time being, namely that it is sometimes in local coordinates,
+        // sometimes relative to the parent, depending on the platform plugin.
+        // We require local coords here.
+        d->doFlush(QRect(QPoint(0, 0), size()));
+    }
+}
+
+/*!
+  \internal
+ */
+bool QPaintDeviceWindow::event(QEvent *event)
+{
+    Q_D(QPaintDeviceWindow);
+
+    if (event->type() == QEvent::UpdateRequest) {
+        d->paintEventSent = false;
+        if (handle()) // platform window may be gone when the window is closed during app exit
+            d->handleUpdateEvent();
+        return true;
+    }
+
+    return QWindow::event(event);
+}
+
+/*!
+  \internal
+ */
+QPaintDeviceWindow::QPaintDeviceWindow(QPaintDeviceWindowPrivate &dd, QWindow *parent)
+    : QWindow(dd, parent)
+{
+}
+
+/*!
+  \internal
+ */
+QPaintEngine *QPaintDeviceWindow::paintEngine() const
+{
+    return 0;
+}
+
+QT_END_NAMESPACE
diff --git a/src/gui/kernel/qpaintdevicewindow.h b/src/gui/kernel/qpaintdevicewindow.h
new file mode 100644
index 0000000000..79047e47f4
--- /dev/null
+++ b/src/gui/kernel/qpaintdevicewindow.h
@@ -0,0 +1,77 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QPAINTDEVICEWINDOW_H
+#define QPAINTDEVICEWINDOW_H
+
+#include <QtGui/QWindow>
+#include <QtGui/QPaintDevice>
+
+QT_BEGIN_NAMESPACE
+
+class QPaintDeviceWindowPrivate;
+class QPaintEvent;
+
+class Q_GUI_EXPORT QPaintDeviceWindow : public QWindow, public QPaintDevice
+{
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(QPaintDeviceWindow)
+
+public:
+    void update(const QRect &rect);
+    void update(const QRegion &region);
+
+    using QWindow::width;
+    using QWindow::height;
+    using QWindow::devicePixelRatio;
+
+public Q_SLOTS:
+    void update();
+
+protected:
+    virtual void paintEvent(QPaintEvent *event);
+
+    int metric(PaintDeviceMetric metric) const Q_DECL_OVERRIDE;
+    void exposeEvent(QExposeEvent *) Q_DECL_OVERRIDE;
+    bool event(QEvent *event) Q_DECL_OVERRIDE;
+
+    QPaintDeviceWindow(QPaintDeviceWindowPrivate &dd, QWindow *parent);
+
+private:
+    QPaintEngine *paintEngine() const Q_DECL_OVERRIDE;
+    Q_DISABLE_COPY(QPaintDeviceWindow)
+};
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/gui/kernel/qpaintdevicewindow_p.h b/src/gui/kernel/qpaintdevicewindow_p.h
new file mode 100644
index 0000000000..1935bb6db5
--- /dev/null
+++ b/src/gui/kernel/qpaintdevicewindow_p.h
@@ -0,0 +1,122 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QPAINTDEVICEWINDOW_P_H
+#define QPAINTDEVICEWINDOW_P_H
+
+#include <QtGui/QPaintDeviceWindow>
+#include <QtCore/QCoreApplication>
+#include <QtGui/private/qwindow_p.h>
+#include <QtGui/QPaintEvent>
+
+QT_BEGIN_NAMESPACE
+
+class Q_GUI_EXPORT QPaintDeviceWindowPrivate : public QWindowPrivate
+{
+    Q_DECLARE_PUBLIC(QPaintDeviceWindow)
+
+public:
+    QPaintDeviceWindowPrivate() : paintEventSent(false) { }
+
+    virtual void beginPaint(const QRegion &region)
+    {
+        Q_UNUSED(region);
+    }
+
+    virtual void endPaint()
+    {
+    }
+
+    virtual void flush(const QRegion &region)
+    {
+        Q_UNUSED(region);
+    }
+
+    bool paint(const QRegion &region)
+    {
+        Q_Q(QPaintDeviceWindow);
+        QRegion toPaint = region & dirtyRegion;
+        if (toPaint.isEmpty())
+            return false;
+
+        // Clear the region now. The overridden functions may call update().
+        dirtyRegion -= toPaint;
+
+        beginPaint(toPaint);
+
+        QPaintEvent paintEvent(toPaint);
+        q->paintEvent(&paintEvent);
+
+        endPaint();
+
+        return true;
+    }
+
+    void triggerUpdate()
+    {
+        Q_Q(QPaintDeviceWindow);
+        if (!paintEventSent) {
+            QCoreApplication::postEvent(q, new QEvent(QEvent::UpdateRequest));
+            paintEventSent = true;
+        }
+    }
+
+    void doFlush(const QRegion &region)
+    {
+        QRegion toFlush = region;
+        if (paint(toFlush))
+            flush(toFlush);
+    }
+
+    void handleUpdateEvent()
+    {
+        if (dirtyRegion.isEmpty())
+            return;
+        doFlush(dirtyRegion);
+    }
+
+    void markWindowAsDirty()
+    {
+        Q_Q(QPaintDeviceWindow);
+        dirtyRegion += QRect(QPoint(0, 0), q->size());
+    }
+
+private:
+    QRegion dirtyRegion;
+    bool paintEventSent;
+};
+
+
+QT_END_NAMESPACE
+
+#endif //QPAINTDEVICEWINDOW_P_H
diff --git a/src/gui/kernel/qpalette.cpp b/src/gui/kernel/qpalette.cpp
index f284c20af5..e3862c1865 100644
--- a/src/gui/kernel/qpalette.cpp
+++ b/src/gui/kernel/qpalette.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -643,11 +635,22 @@ QPalette::QPalette(const QPalette &p)
 }
 
 /*!
+    \fn QPalette::QPalette(QPalette &&other)
+    \since 5.4
+
+    Move-constructs a QPalette instance, making it point at the same
+    object that \a other was pointing to.
+
+    After being moved from, you can only assign to or destroy \a other.
+    Any other operation will result in undefined behavior.
+*/
+
+/*!
     Destroys the palette.
 */
 QPalette::~QPalette()
 {
-    if(!d->ref.deref())
+    if (d && !d->ref.deref())
         delete d;
 }
 
@@ -668,7 +671,7 @@ QPalette &QPalette::operator=(const QPalette &p)
 {
     p.d->ref.ref();
     data = p.data;
-    if(!d->ref.deref())
+    if (d && !d->ref.deref())
         delete d;
     d = p.d;
     return *this;
@@ -1141,9 +1144,33 @@ Q_GUI_EXPORT QPalette qt_fusionPalette()
 }
 
 #ifndef QT_NO_DEBUG_STREAM
-QDebug operator<<(QDebug dbg, const QPalette &)
+QDebug operator<<(QDebug dbg, const QPalette &p)
 {
-    dbg.nospace() << "QPalette()";
+    const char *colorGroupNames[] = {"Active", "Disabled", "Inactive"};
+    const char *colorRoleNames[] =
+        {"WindowText", "Button", "Light", "Midlight", "Dark", "Mid", "Text",
+         "BrightText", "ButtonText", "Base", "Window", "Shadow", "Highlight",
+         "HighlightedText", "Link", "LinkVisited", "AlternateBase", "NoRole",
+         "ToolTipBase","ToolTipText" };
+    QDebug nospace = dbg.nospace();
+    const uint mask = p.resolve();
+    nospace << "QPalette(resolve=" << hex << showbase << mask << ',';
+    for (int role = 0; role < (int)QPalette::NColorRoles; ++role) {
+        if (mask & (1<<role)) {
+            if (role)
+                nospace << ',';
+            nospace << colorRoleNames[role] << ":[";
+            for (int group = 0; group < (int)QPalette::NColorGroups; ++group) {
+                if (group)
+                    nospace << ',';
+                const QRgb color = p.color(static_cast<QPalette::ColorGroup>(group),
+                                           static_cast<QPalette::ColorRole>(role)).rgba();
+                nospace << colorGroupNames[group] << ':' << color;
+            }
+            nospace << ']';
+        }
+    }
+    nospace << ')' << noshowbase << dec;
     return dbg.space();
 }
 #endif
diff --git a/src/gui/kernel/qpalette.h b/src/gui/kernel/qpalette.h
index 8d9754d388..c877084c09 100644
--- a/src/gui/kernel/qpalette.h
+++ b/src/gui/kernel/qpalette.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,8 @@ public:
     ~QPalette();
     QPalette &operator=(const QPalette &palette);
 #ifdef Q_COMPILER_RVALUE_REFS
+    QPalette(QPalette &&other) Q_DECL_NOTHROW
+        : d(other.d), data(other.data) { other.d = Q_NULLPTR; }
     inline QPalette &operator=(QPalette &&other)
     {
         for_faster_swapping_dont_use = other.for_faster_swapping_dont_use;
diff --git a/src/gui/kernel/qpixelformat.cpp b/src/gui/kernel/qpixelformat.cpp
new file mode 100644
index 0000000000..cfa8a96d69
--- /dev/null
+++ b/src/gui/kernel/qpixelformat.cpp
@@ -0,0 +1,561 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qpixelformat.h"
+
+QT_BEGIN_NAMESPACE
+
+/*!
+    \class QPixelFormat
+    \inmodule QtGui
+    \since 5.4
+    \brief QPixelFormat is a class for describing different pixel
+    layouts in graphics buffers
+
+    In Qt there is a often a need to represent the layout of the pixels in a
+    graphics buffer. Internally QPixelFormat stores everything in a 64 bit
+    datastructure. This gives performance but also some limitations.
+
+    QPixelFormat can describe 5 color channels and 1 alpha channel, each can use
+    6 bits to describe the size of the color channel.
+
+    The position of the alpha channel is described with a separate enum. This is
+    to make it possible to describe QImage formats like ARGB32, and also
+    describe typical OpenGL formats like RBGA8888.
+
+    How pixels are suppose to be read is determined by the TypeInterpretation
+    enum.  It describes if color values are suppose to be read byte per byte,
+    or if a pixel is suppose to be read as a complete int and then masked.
+    \sa TypeInterpretation
+
+    There is no support for describing YUV's macro pixels. Instead a list of YUV
+    formats has been made. When a QPixelFormat is describing a YUV format, the
+    bitsPerPixel value has been deduced by the YUV Layout enum. Also, the color
+    channels should all be set to zero except the fifth color channel that
+    should store the bitsPerPixel value.
+*/
+
+/*!
+    \enum QPixelFormat::ColorModel
+
+    This enum type is used to describe the color model of the pixelformat.
+
+    \value RGB The color model is RGB.
+
+    \value BGR This is logically the opposite endian version of RGB. However,
+    for ease of use it has its own model.
+
+    \value Indexed The color model uses a color palette.
+
+    \value Grayscale The color model is Grayscale.
+
+    \value CMYK The color model is CMYK.
+
+    \value HSL The color model is HSL.
+
+    \value HSV The color model is HSV.
+
+    \value YUV The color model is YUV.
+*/
+
+/*!
+    \enum QPixelFormat::AlphaUsage
+
+    This enum describes if the alpha channel is used or not. Sometimes the
+    pixelformat will have a size for the alpha channel, but the pixel format
+    does actually not use the alpha channel. For example  RGB32 is such a
+    format. The RGB channels are 8 bits each, and there is no alpha channel.
+    But the complete size for each pixel is 32. Therefore the alpha channel size
+    is 8, but the alpha channel is ignored. Its important to note that in such
+    situations the position of the alpha channel is significant.
+
+    \value IgnoresAlpha The alpha channel is not used.
+
+    \value UsesAlpha    The alpha channel is used.
+*/
+
+/*!
+    \enum QPixelFormat::AlphaPosition
+
+    This enum type is used to describe the alpha channels position relative to the
+    color channels.
+
+    \value AtBeginning The alpha channel will be put in front of the color
+                       channels . E.g. ARGB.
+
+    \value AtEnd       The alpha channel will be put in the back of the color
+                       channels. E.g. RGBA.
+*/
+
+/*!
+    \enum QPixelFormat::AlphaPremultiplied
+
+    This enum type describes the boolean state if the alpha channel is multiplied
+    into the color channels or not.
+
+    \value NotPremultiplied The alpha channel is not multiplied into the color channels.
+
+    \value Premultiplied    The alpha channel is multiplied into the color channels.
+*/
+
+/*!
+    \enum QPixelFormat::TypeInterpretation
+
+    This enum describes how each pixel is interpreted. If a pixel is read as a
+    full 32 bit unsigned integer and then each channel is masked out, or if
+    each byte is read as unsigned char values. Typically QImage formats
+    interpret one pixel as an unsigned integer and then the color channels are
+    masked out. OpenGL on the other hand typically interpreted pixels "one byte
+    after the other", Ie. unsigned byte.
+
+    QImage also have the format Format_RGBA8888 (and its derivatives), where
+    the pixels are interpreted as unsigned bytes. OpenGL has extensions that makes it
+    possible to upload pixel buffers in an unsigned integer format.
+
+    \image qpixelformat-argb32buffer.png An unsigned integer ARGB32 pixel.
+
+    The image above shows a ARGB pixel in memory read as an unsigned integer.
+    However, if this pixel was read byte for byte on a little endian system the
+    first byte would be the byte containing the B-channel. The next byte would
+    be the G-channel, then the R-channel and finally the A-channel. This shows
+    that on little endian systems, how each pixel is interpreted is significant
+    for integer formats. This is not the case on big endian systems.
+
+    \value UnsignedInteger
+    \value UnsignedShort
+    \value UnsignedByte
+    \value FloatingPoint
+*/
+
+/*!
+    \enum QPixelFormat::ByteOrder
+
+    This enum describes the ByteOrder of the pixel format. This enum is mostly
+    ignored but have some use cases for YUV formats. BGR formats have their own
+    color model, and should not be described by using the opposite endianness
+    on an RGB format.
+
+    \value LittleEndian        The byte order is little endian.
+    \value BigEndian           The byte order is big endian.
+    \value CurrentSystemEndian This enum will not be stored, but is converted in
+                               the constructor to the endian enum that matches
+                               the enum of the current system.
+
+*/
+
+/*!
+    \enum QPixelFormat::YUVLayout
+
+    YUV is not represented by describing the size of the color channels. This is
+    because YUV often use macro pixels, making the concept of sperate color channels
+    invalid. Instead the different YUV layouts are described with this enum.
+
+    \value YUV444
+    \value YUV422
+    \value YUV411
+    \value YUV420P
+    \value YUV420SP
+    \value YV12
+    \value UYVY
+    \value YUYV
+    \value NV12
+    \value NV21
+    \value IMC1
+    \value IMC2
+    \value IMC3
+    \value IMC4
+    \value Y8
+    \value Y16
+*/
+
+/*!
+    \fn QPixelFormat::QPixelFormat()
+
+    Creates a null pixelformat. This format maps to QImage::Format_Invalid.
+*/
+
+/*!
+    \fn QPixelFormat::QPixelFormat(ColorModel colorModel,
+                                   uchar firstSize,
+                                   uchar secondSize,
+                                   uchar thirdSize,
+                                   uchar fourthSize,
+                                   uchar fifthSize,
+                                   uchar alphaSize,
+                                   AlphaUsage alphaUsage,
+                                   AlphaPosition alphaPosition,
+                                   AlphaPremultiplied premultiplied,
+                                   TypeInterpretation typeInterpretation,
+                                   ByteOrder byteOrder = CurrentSystemEndian,
+                                   uchar subEnum = 0)
+
+    Creates a QPixelFormat which assigns its data to the attributes.
+    \a colorModel will be put into a buffer which is 4 bits long.
+
+    \a firstSize \a secondSize \a thirdSize \a fourthSize \a fifthSize \a
+    alphaSize are all meant to represent the size of a channel. The channels will
+    be used for different uses dependent on the \a colorModel. For RGB the
+    firstSize will represent the Red channel. On CMYK it will represent the
+    value of the Cyan channel.
+
+    \a alphaUsage represents if the alpha channel is used or not.
+
+    \a alphaPosition is the position of the alpha channel.
+
+    \a premultiplied represents if the alpha channel is already multiplied with
+    the color channels.
+
+    \a typeInterpretation is how the pixel is interpreted.
+
+    \a byteOrder represents the endianness of the pixelformat. This defaults to
+    CurrentSystemEndian.
+
+    \a subEnum is used for colorModels that have to store some extra
+    information with supplying an extra enum. This is used by YUV to store the
+    YUV type The default value is 0.
+*/
+
+/*!
+    \fn QPixelFormat qPixelFormatRgba(uchar redSize,
+                                      uchar greenSize,
+                                      uchar blueSize,
+                                      uchar alphaSize,
+                                      QPixelFormat::AlphaUsage alphaUsage,
+                                      QPixelFormat::AlphaPosition alphaPosition,
+                                      QPixelFormat::AlphaPremultiplied premultiplied = QPixelFormat::NotPremultiplied,
+                                      QPixelFormat::TypeInterpretation typeInterpretation = QPixelFormat::UnsignedInteger)
+    \relates QPixelFormat
+
+    Constructor function making an RGB pixelformat. \a redSize \a greenSize \a
+    blueSize represent the size of each color channel. \a alphaSize describes
+    the alpha channel size and its position is described with \a alphaPosition.
+    \a alphaUsage is used to determine if the alpha channel is used or not.
+    Setting the alpha channel size to 8 and alphaUsage to IgnoresAlpha is how
+    it is possible to create a 32 bit format where the rgb channels only use 24
+    bits combined. \a premultiplied \a typeInterpretation are
+    accessible with accessors with the same name.
+
+    \sa QPixelFormat::TypeInterpretation
+*/
+
+/*!
+    \fn QPixelFormat qPixelFormatGrayscale(uchar channelSize,
+                                           QPixelFormat::TypeInterpretation typeInterpretation = QPixelFormat::UnsignedInteger)
+    \relates QPixelFormat
+
+    Constructor function for creating a Grayscale format. Monochrome formats can be
+    described by passing 1 to \a channelSize. Its also possible to define very
+    accurate grayscale formats using doubles to describe each pixel by passing 8
+    as \a channelSize and FloatingPoint as \a typeInterpretation.
+
+    \sa QPixelFormat::TypeInterpretation
+*/
+
+/*!
+    \fn QPixelFormat qPixelFormatCmyk(uchar channelSize,
+                                      uchar alphaSize = 0,
+                                      QPixelFormat::AlphaUsage alphaUsage = QPixelFormat::IgnoresAlpha,
+                                      QPixelFormat::AlphaPosition alphaPosition = QPixelFormat::AtBeginning,
+                                      QPixelFormat::TypeInterpretation typeInterpretation = QPixelFormat::UnsignedInteger)
+    \relates QPixelFormat
+
+    Constructor function for creating CMYK formats. The channel count will be 4 or
+    5 depending on if \a alphaSize is bigger than zero or not. The CMYK color
+    channels will all be set to the value of \a channelSize.
+
+    \a alphaUsage \a alphaPosition and \a typeInterpretation are all accessible with
+    the accessors with the same name.
+
+    \sa QPixelFormat::TypeInterpretation
+*/
+
+/*!
+    \fn QPixelFormat qPixelFormatHsl(uchar channelSize,
+                                     uchar alphaSize = 0,
+                                     QPixelFormat::AlphaUsage alphaUsage = QPixelFormat::IgnoresAlpha,
+                                     QPixelFormat::AlphaPosition alphaPosition = QPixelFormat::AtBeginning,
+                                     QPixelFormat::TypeInterpretation typeInterpretation = QPixelFormat::FloatingPoint)
+    \relates QPixelFormat
+
+    Constructor function for creating HSL formats. The channel count will be 3 or 4
+    depending on if \a alphaSize is bigger than 0.
+
+    \a channelSize will set the hueSize saturationSize and lightnessSize to the same value.
+
+    \a alphaUsage \a alphaPosition and \a typeInterpretation are all accessible with
+    the accessors with the same name.
+*/
+
+/*!
+    \fn QPixelFormat qPixelFormatHsv(uchar channelSize,
+                                     uchar alphaSize = 0,
+                                     QPixelFormat::AlphaUsage alphaUsage = QPixelFormat::IgnoresAlpha,
+                                     QPixelFormat::AlphaPosition alphaPosition = QPixelFormat::AtBeginning,
+                                     QPixelFormat::TypeInterpretation typeInterpretation = QPixelFormat::FloatingPoint)
+    \relates QPixelFormat
+
+    Constructor function for creating HSV formats. The channel count will be 3 or 4
+    depending on if \a alphaSize is bigger than 0.
+
+    \a channelSize will set the hueSize saturationSize and brightnessSize to the same value.
+
+    \a alphaUsage \a alphaPosition and \a typeInterpretation are all accessible with
+    the accessors with the same name.
+*/
+
+/*!
+    \fn QPixelFormat qPixelFormatYuv(QPixelFormat::YUVLayout yuvLayout,
+                                     uchar alphaSize = 0,
+                                     QPixelFormat::AlphaUsage alphaUsage = QPixelFormat::IgnoresAlpha,
+                                     QPixelFormat::AlphaPosition alphaPosition = QPixelFormat::AtBeginning,
+                                     QPixelFormat::AlphaPremultiplied premultiplied = QPixelFormat::NotPremultiplied,
+                                     QPixelFormat::TypeInterpretation typeInterpretation = QPixelFormat::UnsignedByte,
+                                     QPixelFormat::ByteOrder byteOrder = QPixelFormat::LittleEndian)
+    \relates QPixelFormat
+
+    Constructor function for creating a QPixelFormat describing a YUV format with
+    \a yuvLayout.  \a alphaSize describes the size of a potential alpha channel
+    and is position is described with \a alphaPosition. The "first" "second" ..
+    "fifth" channels are all set to 0. \a alphaUsage \a premultiplied \a
+    typeInterpretation and \a byteOrder will work as with other formats.
+*/
+
+/*!
+    \fn ColorModel QPixelFormat::colorModel() const
+
+    Accessor function for getting the colorModel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::channelCount() const
+
+    Accessor function for getting the channelCount. Channel Count is deduced
+    by color channels with a size > 0 and if the size of the alpha channel is > 0.
+*/
+
+/*!
+    \fn uchar QPixelFormat::redSize() const
+
+    Accessor function for the size of the red color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::greenSize() const
+
+    Accessor function for the size of the green color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::blueSize() const
+
+    Accessor function for the size of the blue color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::cyanSize() const
+
+    Accessor function for the cyan color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::magentaSize() const
+
+    Accessor function for the megenta color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::yellowSize() const
+
+    Accessor function for the yellow color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::blackSize() const
+
+    Accessor function for the black/key color channel.
+*/
+
+/*!
+    \fn uchar QPixelFormat::hueSize() const
+
+    Accessor function for the hue channel size.
+*/
+
+/*!
+    \fn uchar QPixelFormat::saturationSize() const
+
+    Accessor function for the saturation channel size.
+*/
+
+/*!
+    \fn uchar QPixelFormat::lightnessSize() const
+
+    Accessor function for the lightness channel size.
+*/
+
+/*!
+    \fn uchar QPixelFormat::brightnessSize() const
+
+    Accessor function for the brightness channel size.
+*/
+
+/*!
+    \fn uchar QPixelFormat::alphaSize() const
+
+    Accessor function for the alpha channel size.
+*/
+
+/*!
+    \fn uchar QPixelFormat::bitsPerPixel() const
+
+    Accessor function for the bits used per pixel. This function returns the
+    sum of the color channels + the size of the alpha channel.
+*/
+
+/*!
+    \fn AlphaPremultiplied QPixelFormat::premultiplied() const
+
+    Accessor function for the AlphaPremultiplied enum. This indicates if the
+    alpha channel is multiplied in to the color channels.
+
+*/
+
+/*!
+    \fn TypeInterpretation QPixelFormat::typeInterpretation() const
+
+    Accessor function for the type representation of a color channel or a pixel.
+
+    \sa TypeInterpretation
+*/
+
+/*!
+    \fn ByteOrder QPixelFormat::byteOrder() const
+
+    The byte order is almost always set the the byte order of the current
+    system. However, it can be useful to describe some YUV formats. This
+    function should never return QPixelFormat::CurrentSystemEndian as this
+    value is translated to a endian value in the constructor.
+*/
+
+/*!
+    \fn AlphaUsage QPixelFormat::alphaUsage() const
+
+    Accessor function for alphaUsage.
+*/
+
+/*!
+    \fn AlphaPosition QPixelFormat::alphaPosition() const
+
+    Accessor function for alphaPosition.
+*/
+
+/*!
+    \fn YUVLayout QPixelFormat::yuvLayout() const
+
+    Accessor function for the YUVLayout. It is difficult to describe the color
+    channels of a YUV pixel format since YUV color model uses macro pixels.
+    Instead the layout of the pixels are stored as an enum.
+*/
+
+/*!
+    \fn uchar QPixelFormat::subEnum() const
+
+    Accessor for the datapart which contains subEnums
+    This is the same as the yuvLayout() function.
+
+    \sa yuvLayout()
+    \internal
+*/
+
+Q_STATIC_ASSERT(sizeof(QPixelFormat) == sizeof(quint64));
+
+
+namespace QtPrivate {
+    QPixelFormat QPixelFormat_createYUV(QPixelFormat::YUVLayout yuvLayout,
+                                        uchar alphaSize,
+                                        QPixelFormat::AlphaUsage alphaUsage,
+                                        QPixelFormat::AlphaPosition alphaPosition,
+                                        QPixelFormat::AlphaPremultiplied premultiplied,
+                                        QPixelFormat::TypeInterpretation typeInterpretation,
+                                        QPixelFormat::ByteOrder byteOrder)
+    {
+        uchar bits_per_pixel = 0;
+        switch (yuvLayout) {
+        case QPixelFormat::YUV444:
+            bits_per_pixel = 24;
+            break;
+        case QPixelFormat::YUV422:
+            bits_per_pixel = 16;
+            break;
+        case QPixelFormat::YUV411:
+        case QPixelFormat::YUV420P:
+        case QPixelFormat::YUV420SP:
+        case QPixelFormat::YV12:
+            bits_per_pixel = 12;
+            break;
+        case QPixelFormat::UYVY:
+        case QPixelFormat::YUYV:
+            bits_per_pixel = 16;
+            break;
+        case QPixelFormat::NV12:
+        case QPixelFormat::NV21:
+            bits_per_pixel = 12;
+            break;
+        case QPixelFormat::IMC1:
+        case QPixelFormat::IMC2:
+        case QPixelFormat::IMC3:
+        case QPixelFormat::IMC4:
+            bits_per_pixel = 12;
+            break;
+        case QPixelFormat::Y8:
+            bits_per_pixel = 8;
+            break;
+        case QPixelFormat::Y16:
+            bits_per_pixel = 16;
+            break;
+        }
+
+        return QPixelFormat(QPixelFormat::YUV,
+                            0, 0, 0, 0,
+                            bits_per_pixel,
+                            alphaSize,
+                            alphaUsage,
+                            alphaPosition,
+                            premultiplied,
+                            typeInterpretation,
+                            byteOrder,
+                            yuvLayout);
+    }
+}
+
+QT_END_NAMESPACE
diff --git a/src/gui/kernel/qpixelformat.h b/src/gui/kernel/qpixelformat.h
new file mode 100644
index 0000000000..f55c97c7c0
--- /dev/null
+++ b/src/gui/kernel/qpixelformat.h
@@ -0,0 +1,383 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QPIXELFORMAT_H
+#define QPIXELFORMAT_H
+
+#include <QtCore/qglobal.h>
+
+QT_BEGIN_NAMESPACE
+
+class QPixelFormat
+{
+    // QPixelFormat basically is a glorified quint64, split into several fields.
+    // We could use bit-fields, but GCC at least generates horrible, horrible code for them,
+    // so we do the bit-twiddling ourselves.
+    enum FieldWidth {
+        ModelFieldWidth = 4,
+        FirstFieldWidth = 6,
+        SecondFieldWidth = FirstFieldWidth,
+        ThirdFieldWidth = FirstFieldWidth,
+        FourthFieldWidth = FirstFieldWidth,
+        FifthFieldWidth = FirstFieldWidth,
+        AlphaFieldWidth = FirstFieldWidth,
+        AlphaUsageFieldWidth = 1,
+        AlphaPositionFieldWidth = 1,
+        PremulFieldWidth = 1,
+        TypeInterpretationFieldWidth = 4,
+        ByteOrderFieldWidth = 2,
+        SubEnumFieldWidth = 6,
+        UnusedFieldWidth = 9,
+
+        TotalFieldWidthByWidths = ModelFieldWidth + FirstFieldWidth + SecondFieldWidth + ThirdFieldWidth +
+                                  FourthFieldWidth + FifthFieldWidth + AlphaFieldWidth + AlphaUsageFieldWidth +
+                                  AlphaPositionFieldWidth + PremulFieldWidth + TypeInterpretationFieldWidth +
+                                  ByteOrderFieldWidth + SubEnumFieldWidth + UnusedFieldWidth
+    };
+
+    enum Field {
+        ModelField = 0,
+        // work around bug in old clang versions: when building webkit
+        // with XCode 4.6 and older this fails compilation, thus cast to int
+        FirstField = ModelField + int(ModelFieldWidth),
+        SecondField = FirstField + FirstFieldWidth,
+        ThirdField = SecondField + SecondFieldWidth,
+        FourthField = ThirdField + ThirdFieldWidth,
+        FifthField = FourthField + FourthFieldWidth,
+        AlphaField = FifthField + FifthFieldWidth,
+        AlphaUsageField = AlphaField + AlphaFieldWidth,
+        AlphaPositionField = AlphaUsageField + AlphaUsageFieldWidth,
+        PremulField = AlphaPositionField + AlphaPositionFieldWidth,
+        TypeInterpretationField = PremulField + PremulFieldWidth,
+        ByteOrderField = TypeInterpretationField + TypeInterpretationFieldWidth,
+        SubEnumField = ByteOrderField + ByteOrderFieldWidth,
+        UnusedField = SubEnumField + SubEnumFieldWidth,
+
+        TotalFieldWidthByOffsets = UnusedField + UnusedFieldWidth
+    };
+
+    Q_STATIC_ASSERT(uint(TotalFieldWidthByWidths) == uint(TotalFieldWidthByOffsets));
+    Q_STATIC_ASSERT(uint(TotalFieldWidthByWidths) == 8 * sizeof(quint64));
+
+    Q_DECL_CONSTEXPR inline uchar get(Field offset, FieldWidth width) const Q_DECL_NOTHROW
+    { return uchar((data >> uint(offset)) & ((Q_UINT64_C(1) << uint(width)) - Q_UINT64_C(1))); }
+    Q_DECL_CONSTEXPR static inline quint64 set(Field offset, FieldWidth width, uchar value)
+    { return (quint64(value) & ((Q_UINT64_C(1) << uint(width)) - Q_UINT64_C(1))) << uint(offset); }
+
+public:
+    enum ColorModel {
+        RGB,
+        BGR,
+        Indexed,
+        Grayscale,
+        CMYK,
+        HSL,
+        HSV,
+        YUV
+    };
+
+    enum AlphaUsage {
+        UsesAlpha,
+        IgnoresAlpha
+    };
+
+    enum AlphaPosition {
+        AtBeginning,
+        AtEnd
+    };
+
+    enum AlphaPremultiplied {
+        NotPremultiplied,
+        Premultiplied
+    };
+
+    enum TypeInterpretation {
+        UnsignedInteger,
+        UnsignedShort,
+        UnsignedByte,
+        FloatingPoint
+    };
+
+    enum YUVLayout {
+        YUV444,
+        YUV422,
+        YUV411,
+        YUV420P,
+        YUV420SP,
+        YV12,
+        UYVY,
+        YUYV,
+        NV12,
+        NV21,
+        IMC1,
+        IMC2,
+        IMC3,
+        IMC4,
+        Y8,
+        Y16
+    };
+
+    enum ByteOrder {
+        LittleEndian,
+        BigEndian,
+        CurrentSystemEndian
+    };
+
+    Q_DECL_CONSTEXPR inline QPixelFormat() Q_DECL_NOTHROW : data(0) {}
+    Q_DECL_CONSTEXPR inline QPixelFormat(ColorModel colorModel,
+                                           uchar firstSize,
+                                           uchar secondSize,
+                                           uchar thirdSize,
+                                           uchar fourthSize,
+                                           uchar fifthSize,
+                                           uchar alphaSize,
+                                           AlphaUsage alphaUsage,
+                                           AlphaPosition alphaPosition,
+                                           AlphaPremultiplied premultiplied,
+                                           TypeInterpretation typeInterpretation,
+                                           ByteOrder byteOrder = CurrentSystemEndian,
+                                           uchar subEnum = 0) Q_DECL_NOTHROW;
+
+    Q_DECL_CONSTEXPR inline ColorModel colorModel() const  Q_DECL_NOTHROW { return ColorModel(get(ModelField, ModelFieldWidth)); }
+    Q_DECL_CONSTEXPR inline uchar channelCount() const Q_DECL_NOTHROW { return (get(FirstField, FirstFieldWidth) > 0) +
+                                                                                 (get(SecondField, SecondFieldWidth) > 0) +
+                                                                                 (get(ThirdField, ThirdFieldWidth) > 0) +
+                                                                                 (get(FourthField, FourthFieldWidth) > 0) +
+                                                                                 (get(FifthField, FifthFieldWidth) > 0) +
+                                                                                 (get(AlphaField, AlphaFieldWidth) > 0); }
+
+    Q_DECL_CONSTEXPR inline uchar redSize() const Q_DECL_NOTHROW { return get(FirstField, FirstFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar greenSize() const Q_DECL_NOTHROW { return get(SecondField, SecondFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar blueSize() const Q_DECL_NOTHROW { return get(ThirdField, ThirdFieldWidth); }
+
+    Q_DECL_CONSTEXPR inline uchar cyanSize() const Q_DECL_NOTHROW { return get(FirstField, FirstFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar magentaSize() const Q_DECL_NOTHROW { return get(SecondField, SecondFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar yellowSize() const Q_DECL_NOTHROW { return get(ThirdField, ThirdFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar blackSize() const Q_DECL_NOTHROW { return get(FourthField, FourthFieldWidth); }
+
+    Q_DECL_CONSTEXPR inline uchar hueSize() const Q_DECL_NOTHROW { return get(FirstField, FirstFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar saturationSize() const Q_DECL_NOTHROW { return get(SecondField, SecondFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar lightnessSize() const Q_DECL_NOTHROW { return get(ThirdField, ThirdFieldWidth); }
+    Q_DECL_CONSTEXPR inline uchar brightnessSize() const Q_DECL_NOTHROW { return get(ThirdField, ThirdFieldWidth); }
+
+    Q_DECL_CONSTEXPR inline uchar alphaSize() const Q_DECL_NOTHROW { return get(AlphaField, AlphaFieldWidth); }
+
+    Q_DECL_CONSTEXPR inline uchar bitsPerPixel() const Q_DECL_NOTHROW { return get(FirstField, FirstFieldWidth) +
+                                                                                 get(SecondField, SecondFieldWidth) +
+                                                                                 get(ThirdField, ThirdFieldWidth) +
+                                                                                 get(FourthField, FourthFieldWidth) +
+                                                                                 get(FifthField, FifthFieldWidth) +
+                                                                                 get(AlphaField, AlphaFieldWidth); }
+
+    Q_DECL_CONSTEXPR inline AlphaUsage alphaUsage() const Q_DECL_NOTHROW { return AlphaUsage(get(AlphaUsageField, AlphaUsageFieldWidth)); }
+    Q_DECL_CONSTEXPR inline AlphaPosition alphaPosition() const Q_DECL_NOTHROW { return AlphaPosition(get(AlphaPositionField, AlphaPositionFieldWidth)); }
+    Q_DECL_CONSTEXPR inline AlphaPremultiplied premultiplied() const Q_DECL_NOTHROW { return AlphaPremultiplied(get(PremulField, PremulFieldWidth)); }
+    Q_DECL_CONSTEXPR inline TypeInterpretation typeInterpretation() const Q_DECL_NOTHROW { return TypeInterpretation(get(TypeInterpretationField, TypeInterpretationFieldWidth)); }
+    Q_DECL_CONSTEXPR inline ByteOrder byteOrder() const Q_DECL_NOTHROW { return ByteOrder(get(ByteOrderField, ByteOrderFieldWidth)); }
+
+    Q_DECL_CONSTEXPR inline YUVLayout yuvLayout() const Q_DECL_NOTHROW { return YUVLayout(get(SubEnumField, SubEnumFieldWidth)); }
+    Q_DECL_CONSTEXPR inline uchar subEnum() const Q_DECL_NOTHROW { return get(SubEnumField, SubEnumFieldWidth); }
+
+private:
+    Q_DECL_CONSTEXPR static inline ByteOrder resolveByteOrder(ByteOrder bo)
+    { return bo == CurrentSystemEndian ? Q_BYTE_ORDER == Q_LITTLE_ENDIAN ? LittleEndian : BigEndian : bo ; }
+
+private:
+    quint64 data;
+
+    friend Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline bool operator==(QPixelFormat fmt1, QPixelFormat fmt2)
+    { return fmt1.data == fmt2.data; }
+
+    friend Q_DECL_CONST_FUNCTION Q_DECL_CONSTEXPR inline bool operator!=(QPixelFormat fmt1, QPixelFormat fmt2)
+    { return !(fmt1 == fmt2); }
+};
+Q_STATIC_ASSERT(sizeof(QPixelFormat) == sizeof(quint64));
+Q_DECLARE_TYPEINFO(QPixelFormat, Q_PRIMITIVE_TYPE);
+
+
+namespace QtPrivate {
+    QPixelFormat Q_GUI_EXPORT QPixelFormat_createYUV(QPixelFormat::YUVLayout yuvLayout,
+                                                     uchar alphaSize,
+                                                     QPixelFormat::AlphaUsage alphaUsage,
+                                                     QPixelFormat::AlphaPosition alphaPosition,
+                                                     QPixelFormat::AlphaPremultiplied premultiplied,
+                                                     QPixelFormat::TypeInterpretation typeInterpretation,
+                                                     QPixelFormat::ByteOrder byteOrder);
+}
+
+Q_DECL_CONSTEXPR
+QPixelFormat::QPixelFormat(ColorModel mdl,
+                           uchar firstSize,
+                           uchar secondSize,
+                           uchar thirdSize,
+                           uchar fourthSize,
+                           uchar fifthSize,
+                           uchar alfa,
+                           AlphaUsage usage,
+                           AlphaPosition position,
+                           AlphaPremultiplied premult,
+                           TypeInterpretation typeInterp,
+                           ByteOrder b_order,
+                           uchar s_enum) Q_DECL_NOTHROW
+    : data(set(ModelField, ModelFieldWidth, uchar(mdl)) |
+           set(FirstField, FirstFieldWidth, firstSize) |
+           set(SecondField, SecondFieldWidth, secondSize) |
+           set(ThirdField, ThirdFieldWidth, thirdSize) |
+           set(FourthField, FourthFieldWidth, fourthSize) |
+           set(FifthField, FifthFieldWidth, fifthSize) |
+           set(AlphaField, AlphaFieldWidth, alfa) |
+           set(AlphaUsageField, AlphaUsageFieldWidth, uchar(usage)) |
+           set(AlphaPositionField, AlphaPositionFieldWidth, uchar(position)) |
+           set(PremulField, PremulFieldWidth, uchar(premult)) |
+           set(TypeInterpretationField, TypeInterpretationFieldWidth, uchar(typeInterp)) |
+           set(ByteOrderField, ByteOrderFieldWidth, uchar(resolveByteOrder(b_order))) |
+           set(SubEnumField, SubEnumFieldWidth, s_enum) |
+           set(UnusedField, UnusedFieldWidth, 0))
+{
+}
+
+Q_DECL_CONSTEXPR inline QPixelFormat qPixelFormatRgba(uchar red,
+                                                      uchar green,
+                                                      uchar blue,
+                                                      uchar alfa,
+                                                      QPixelFormat::AlphaUsage usage,
+                                                      QPixelFormat::AlphaPosition position,
+                                                      QPixelFormat::AlphaPremultiplied pmul=QPixelFormat::NotPremultiplied,
+                                                      QPixelFormat::TypeInterpretation typeInt=QPixelFormat::UnsignedInteger) Q_DECL_NOTHROW
+{
+    return QPixelFormat(QPixelFormat::RGB,
+                        red,
+                        green,
+                        blue,
+                        0,
+                        0,
+                        alfa,
+                        usage,
+                        position,
+                        pmul,
+                        typeInt);
+}
+
+Q_DECL_CONSTEXPR inline QPixelFormat qPixelFormatGrayscale(uchar channelSize,
+                                                           QPixelFormat::TypeInterpretation typeInt=QPixelFormat::UnsignedInteger) Q_DECL_NOTHROW
+{
+    return QPixelFormat(QPixelFormat::Grayscale,
+                        channelSize,
+                        0,
+                        0,
+                        0,
+                        0,
+                        0,
+                        QPixelFormat::IgnoresAlpha,
+                        QPixelFormat::AtBeginning,
+                        QPixelFormat::NotPremultiplied,
+                        typeInt);
+}
+
+Q_DECL_CONSTEXPR inline QPixelFormat qPixelFormatCmyk(uchar channelSize,
+                                                      uchar alfa=0,
+                                                      QPixelFormat::AlphaUsage usage=QPixelFormat::IgnoresAlpha,
+                                                      QPixelFormat::AlphaPosition position=QPixelFormat::AtBeginning,
+                                                      QPixelFormat::TypeInterpretation typeInt=QPixelFormat::UnsignedInteger) Q_DECL_NOTHROW
+{
+    return QPixelFormat(QPixelFormat::CMYK,
+                        channelSize,
+                        channelSize,
+                        channelSize,
+                        channelSize,
+                        0,
+                        alfa,
+                        usage,
+                        position,
+                        QPixelFormat::NotPremultiplied,
+                        typeInt);
+}
+
+Q_DECL_CONSTEXPR inline QPixelFormat qPixelFormatHsl(uchar channelSize,
+                                                     uchar alfa=0,
+                                                     QPixelFormat::AlphaUsage usage=QPixelFormat::IgnoresAlpha,
+                                                     QPixelFormat::AlphaPosition position=QPixelFormat::AtBeginning,
+                                                     QPixelFormat::TypeInterpretation typeInt=QPixelFormat::FloatingPoint) Q_DECL_NOTHROW
+{
+    return QPixelFormat(QPixelFormat::HSL,
+                        channelSize,
+                        channelSize,
+                        channelSize,
+                        0,
+                        0,
+                        alfa,
+                        usage,
+                        position,
+                        QPixelFormat::NotPremultiplied,
+                        typeInt);
+}
+
+Q_DECL_CONSTEXPR inline QPixelFormat qPixelFormatHsv(uchar channelSize,
+                                                     uchar alfa=0,
+                                                     QPixelFormat::AlphaUsage usage=QPixelFormat::IgnoresAlpha,
+                                                     QPixelFormat::AlphaPosition position=QPixelFormat::AtBeginning,
+                                                     QPixelFormat::TypeInterpretation typeInt=QPixelFormat::FloatingPoint) Q_DECL_NOTHROW
+{
+    return QPixelFormat(QPixelFormat::HSV,
+                        channelSize,
+                        channelSize,
+                        channelSize,
+                        0,
+                        0,
+                        alfa,
+                        usage,
+                        position,
+                        QPixelFormat::NotPremultiplied,
+                        typeInt);
+}
+
+inline QPixelFormat qPixelFormatYuv(QPixelFormat::YUVLayout layout,
+                                    uchar alfa=0,
+                                    QPixelFormat::AlphaUsage usage=QPixelFormat::IgnoresAlpha,
+                                    QPixelFormat::AlphaPosition position=QPixelFormat::AtBeginning,
+                                    QPixelFormat::AlphaPremultiplied p_mul=QPixelFormat::NotPremultiplied,
+                                    QPixelFormat::TypeInterpretation typeInt=QPixelFormat::UnsignedByte,
+                                    QPixelFormat::ByteOrder b_order=QPixelFormat::LittleEndian)
+{
+    return QtPrivate::QPixelFormat_createYUV(layout,
+                                             alfa,
+                                             usage,
+                                             position,
+                                             p_mul,
+                                             typeInt,
+                                             b_order);
+}
+
+QT_END_NAMESPACE
+
+#endif //QPIXELFORMAT_H
diff --git a/src/gui/kernel/qplatformclipboard.cpp b/src/gui/kernel/qplatformclipboard.cpp
index d93268c9f2..3774a6be11 100644
--- a/src/gui/kernel/qplatformclipboard.cpp
+++ b/src/gui/kernel/qplatformclipboard.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformclipboard.h b/src/gui/kernel/qplatformclipboard.h
index 3ffc020e8d..f70ece8a13 100644
--- a/src/gui/kernel/qplatformclipboard.h
+++ b/src/gui/kernel/qplatformclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformcursor.cpp b/src/gui/kernel/qplatformcursor.cpp
index c2f510b496..2426cc5872 100644
--- a/src/gui/kernel/qplatformcursor.cpp
+++ b/src/gui/kernel/qplatformcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenVG module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -122,8 +114,13 @@ QPoint QPlatformCursor::pos() const
 
 void QPlatformCursor::setPos(const QPoint &pos)
 {
-    Q_UNUSED(pos);
-    qWarning("This plugin does not support QCursor::setPos()");
+    static bool firstCall = true;
+    if (firstCall) {
+        firstCall = false;
+        qWarning("This plugin does not support QCursor::setPos()"
+                 "; emulating movement within the application.");
+    }
+    QWindowSystemInterface::handleMouseEvent(0, pos, pos, Qt::NoButton);
 }
 
 // End of display and pointer event handling code
diff --git a/src/gui/kernel/qplatformcursor.h b/src/gui/kernel/qplatformcursor.h
index 011209aa3a..6e9983ecc6 100644
--- a/src/gui/kernel/qplatformcursor.h
+++ b/src/gui/kernel/qplatformcursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenVG module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformdialoghelper.cpp b/src/gui/kernel/qplatformdialoghelper.cpp
index 66a2fdff96..5172801e78 100644
--- a/src/gui/kernel/qplatformdialoghelper.cpp
+++ b/src/gui/kernel/qplatformdialoghelper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformdialoghelper.h b/src/gui/kernel/qplatformdialoghelper.h
index 731440723b..e0730cd3fa 100644
--- a/src/gui/kernel/qplatformdialoghelper.h
+++ b/src/gui/kernel/qplatformdialoghelper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformdrag.cpp b/src/gui/kernel/qplatformdrag.cpp
index 35090cc49e..8a5c7264d1 100644
--- a/src/gui/kernel/qplatformdrag.cpp
+++ b/src/gui/kernel/qplatformdrag.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformdrag.h b/src/gui/kernel/qplatformdrag.h
index 59f9899f23..34ad11e45f 100644
--- a/src/gui/kernel/qplatformdrag.h
+++ b/src/gui/kernel/qplatformdrag.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontext.cpp b/src/gui/kernel/qplatforminputcontext.cpp
index 656c0d0fba..71dd609868 100644
--- a/src/gui/kernel/qplatforminputcontext.cpp
+++ b/src/gui/kernel/qplatforminputcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontext.h b/src/gui/kernel/qplatforminputcontext.h
index 0e4121eed4..7dd89ecd00 100644
--- a/src/gui/kernel/qplatforminputcontext.h
+++ b/src/gui/kernel/qplatforminputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontext_p.h b/src/gui/kernel/qplatforminputcontext_p.h
index 29d6e45269..fcf34c036d 100644
--- a/src/gui/kernel/qplatforminputcontext_p.h
+++ b/src/gui/kernel/qplatforminputcontext_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontextfactory.cpp b/src/gui/kernel/qplatforminputcontextfactory.cpp
index 3e2f234d99..321550f427 100644
--- a/src/gui/kernel/qplatforminputcontextfactory.cpp
+++ b/src/gui/kernel/qplatforminputcontextfactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontextfactory_p.h b/src/gui/kernel/qplatforminputcontextfactory_p.h
index 2177d7965d..64b610a603 100644
--- a/src/gui/kernel/qplatforminputcontextfactory_p.h
+++ b/src/gui/kernel/qplatforminputcontextfactory_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontextplugin.cpp b/src/gui/kernel/qplatforminputcontextplugin.cpp
index d639a4a07f..64e8c916c4 100644
--- a/src/gui/kernel/qplatforminputcontextplugin.cpp
+++ b/src/gui/kernel/qplatforminputcontextplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatforminputcontextplugin_p.h b/src/gui/kernel/qplatforminputcontextplugin_p.h
index ff79bb94b9..df302097c3 100644
--- a/src/gui/kernel/qplatforminputcontextplugin_p.h
+++ b/src/gui/kernel/qplatforminputcontextplugin_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformintegration.cpp b/src/gui/kernel/qplatformintegration.cpp
index da192a8e25..39b031ef6d 100644
--- a/src/gui/kernel/qplatformintegration.cpp
+++ b/src/gui/kernel/qplatformintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -271,13 +263,32 @@ QPlatformPixmap *QPlatformIntegration::createPlatformPixmap(QPlatformPixmap::Pix
 }
 
 #ifndef QT_NO_OPENGL
+/*!
+    Factory function for QPlatformOpenGLContext. The \a context parameter is a pointer to
+    the context for which a platform-specific context backend needs to be
+    created. Configuration settings like the format, share context and screen have to be
+    taken from this QOpenGLContext and the resulting platform context is expected to be
+    backed by a native context that fulfills these criteria.
+
+    If the context has native handles set, no new native context is expected to be created.
+    Instead, the provided handles have to be used. In this case the ownership of the handle
+    must not be taken and the platform implementation is not allowed to destroy the native
+    context. Configuration parameters like the format are also to be ignored. Instead, the
+    platform implementation is responsible for querying the configuriation from the provided
+    native context.
+
+    Returns a pointer to a QPlatformOpenGLContext instance or \c NULL if the context could
+    not be created.
+
+    \sa QOpenGLContext
+*/
 QPlatformOpenGLContext *QPlatformIntegration::createPlatformOpenGLContext(QOpenGLContext *context) const
 {
     Q_UNUSED(context);
     qWarning("This plugin does not support createPlatformOpenGLContext!");
     return 0;
 }
-#endif
+#endif // QT_NO_OPENGL
 
 /*!
    Factory function for QPlatformSharedGraphicsCache. This function will return 0 if the platform
diff --git a/src/gui/kernel/qplatformintegration.h b/src/gui/kernel/qplatformintegration.h
index 4804048fde..d510240fa4 100644
--- a/src/gui/kernel/qplatformintegration.h
+++ b/src/gui/kernel/qplatformintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformintegrationfactory.cpp b/src/gui/kernel/qplatformintegrationfactory.cpp
index 365edd2010..1d08faa0ab 100644
--- a/src/gui/kernel/qplatformintegrationfactory.cpp
+++ b/src/gui/kernel/qplatformintegrationfactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformintegrationfactory_p.h b/src/gui/kernel/qplatformintegrationfactory_p.h
index bc8ce11609..fdad8bd71c 100644
--- a/src/gui/kernel/qplatformintegrationfactory_p.h
+++ b/src/gui/kernel/qplatformintegrationfactory_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformintegrationplugin.cpp b/src/gui/kernel/qplatformintegrationplugin.cpp
index 2a9a047141..e08cc4c339 100644
--- a/src/gui/kernel/qplatformintegrationplugin.cpp
+++ b/src/gui/kernel/qplatformintegrationplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformintegrationplugin.h b/src/gui/kernel/qplatformintegrationplugin.h
index e624e2d31d..915a09a701 100644
--- a/src/gui/kernel/qplatformintegrationplugin.h
+++ b/src/gui/kernel/qplatformintegrationplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformmenu.cpp b/src/gui/kernel/qplatformmenu.cpp
index 54c340abf9..7bfd211f4b 100644
--- a/src/gui/kernel/qplatformmenu.cpp
+++ b/src/gui/kernel/qplatformmenu.cpp
@@ -6,36 +6,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformmenu.h b/src/gui/kernel/qplatformmenu.h
index b88f2a7e84..c832de0be6 100644
--- a/src/gui/kernel/qplatformmenu.h
+++ b/src/gui/kernel/qplatformmenu.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author James Turner <james.turner@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -86,7 +78,7 @@ public:
     virtual void setChecked(bool isChecked) = 0;
     virtual void setShortcut(const QKeySequence& shortcut) = 0;
     virtual void setEnabled(bool enabled) = 0;
-
+    virtual void setIconSize(int size) = 0;
     virtual void setNativeContents(WId item) { Q_UNUSED(item); }
 
 Q_SIGNALS:
@@ -98,6 +90,8 @@ class Q_GUI_EXPORT QPlatformMenu : public QObject
 {
 Q_OBJECT
 public:
+    enum MenuType { DefaultMenu = 0, EditMenu };
+
     virtual void insertMenuItem(QPlatformMenuItem *menuItem, QPlatformMenuItem *before) = 0;
     virtual void removeMenuItem(QPlatformMenuItem *menuItem) = 0;
     virtual void syncMenuItem(QPlatformMenuItem *menuItem) = 0;
@@ -112,11 +106,17 @@ public:
     virtual void setVisible(bool visible) = 0;
     virtual void setMinimumWidth(int width) { Q_UNUSED(width); }
     virtual void setFont(const QFont &font) { Q_UNUSED(font); }
+    virtual void setMenuType(MenuType type) { Q_UNUSED(type); }
 
     virtual void showPopup(const QWindow *parentWindow, QPoint pos, const QPlatformMenuItem *item)
     {
+        showPopup(parentWindow, QRect(pos, QSize()), item);
+    }
+
+    virtual void showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item)
+    {
         Q_UNUSED(parentWindow);
-        Q_UNUSED(pos);
+        Q_UNUSED(targetRect);
         Q_UNUSED(item);
         setVisible(true);
     }
diff --git a/src/gui/kernel/qplatformnativeinterface.cpp b/src/gui/kernel/qplatformnativeinterface.cpp
index 6571a47849..f412b3c420 100644
--- a/src/gui/kernel/qplatformnativeinterface.cpp
+++ b/src/gui/kernel/qplatformnativeinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -118,6 +110,12 @@ QPlatformNativeInterface::NativeResourceForBackingStoreFunction QPlatformNativeI
     return 0;
 }
 
+QFunctionPointer QPlatformNativeInterface::platformFunction(const QByteArray &function) const
+{
+    Q_UNUSED(function);
+    return Q_NULLPTR;
+}
+
 /*!
     Contains generic window properties that the platform may utilize.
 */
diff --git a/src/gui/kernel/qplatformnativeinterface.h b/src/gui/kernel/qplatformnativeinterface.h
index eaa24a9e55..53b046913d 100644
--- a/src/gui/kernel/qplatformnativeinterface.h
+++ b/src/gui/kernel/qplatformnativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,6 +77,8 @@ public:
     virtual NativeResourceForWindowFunction nativeResourceFunctionForWindow(const QByteArray &resource);
     virtual NativeResourceForBackingStoreFunction nativeResourceFunctionForBackingStore(const QByteArray &resource);
 
+    virtual QFunctionPointer platformFunction(const QByteArray &function) const;
+
     virtual QVariantMap windowProperties(QPlatformWindow *window) const;
     virtual QVariant windowProperty(QPlatformWindow *window, const QString &name) const;
     virtual QVariant windowProperty(QPlatformWindow *window, const QString &name, const QVariant &defaultValue) const;
diff --git a/src/gui/kernel/qplatformoffscreensurface.cpp b/src/gui/kernel/qplatformoffscreensurface.cpp
index dd354f465e..7d1b031b21 100644
--- a/src/gui/kernel/qplatformoffscreensurface.cpp
+++ b/src/gui/kernel/qplatformoffscreensurface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformoffscreensurface.h b/src/gui/kernel/qplatformoffscreensurface.h
index 099d8ee94a..07bb710eb8 100644
--- a/src/gui/kernel/qplatformoffscreensurface.h
+++ b/src/gui/kernel/qplatformoffscreensurface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformopenglcontext.cpp b/src/gui/kernel/qplatformopenglcontext.cpp
index f4d343d78a..527bfdd983 100644
--- a/src/gui/kernel/qplatformopenglcontext.cpp
+++ b/src/gui/kernel/qplatformopenglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformopenglcontext.h b/src/gui/kernel/qplatformopenglcontext.h
index 42e4db2f9d..261b6921a4 100644
--- a/src/gui/kernel/qplatformopenglcontext.h
+++ b/src/gui/kernel/qplatformopenglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformscreen.cpp b/src/gui/kernel/qplatformscreen.cpp
index 6bf7915425..71710d1cb1 100644
--- a/src/gui/kernel/qplatformscreen.cpp
+++ b/src/gui/kernel/qplatformscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -275,15 +267,6 @@ QPlatformScreen * QPlatformScreen::platformScreenForWindow(const QWindow *window
 */
 
 /*!
-  Implemented in subclasses to return a page flipper object for the screen, or 0 if the
-  hardware does not support page flipping. The default implementation returns 0.
- */
-QPlatformScreenPageFlipper *QPlatformScreen::pageFlipper() const
-{
-    return 0;
-}
-
-/*!
     Reimplement this function in subclass to return the cursor of the screen.
 
     The default implementation returns 0.
diff --git a/src/gui/kernel/qplatformscreen.h b/src/gui/kernel/qplatformscreen.h
index 085a147e8d..2ca12616b4 100644
--- a/src/gui/kernel/qplatformscreen.h
+++ b/src/gui/kernel/qplatformscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -71,7 +63,6 @@ class QPlatformOpenGLContext;
 class QPlatformScreenPrivate;
 class QPlatformWindow;
 class QPlatformCursor;
-class QPlatformScreenPageFlipper;
 class QScreen;
 class QSurfaceFormat;
 
@@ -115,7 +106,6 @@ public:
 
     virtual QString name() const { return QString(); }
 
-    virtual QPlatformScreenPageFlipper *pageFlipper() const;
     virtual QPlatformCursor *cursor() const;
 
 protected:
diff --git a/src/gui/kernel/qplatformscreen_p.h b/src/gui/kernel/qplatformscreen_p.h
index 588496b494..42a5503461 100644
--- a/src/gui/kernel/qplatformscreen_p.h
+++ b/src/gui/kernel/qplatformscreen_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformscreenpageflipper.cpp b/src/gui/kernel/qplatformscreenpageflipper.cpp
deleted file mode 100644
index 8665adc463..0000000000
--- a/src/gui/kernel/qplatformscreenpageflipper.cpp
+++ /dev/null
@@ -1,121 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qplatformscreenpageflipper.h"
-
-QT_BEGIN_NAMESPACE
-
-/*!
-    \class QPlatformScreenBuffer
-    \since 5.0
-    \internal
-    \preliminary
-    \ingroup qpa
-
-    \brief The QPlatformScreenBuffer class provides an abstraction for screen buffers.
- */
-QPlatformScreenBuffer::QPlatformScreenBuffer()
-    : m_destroyed(false)
-    , m_ready(true)
-{
-
-}
-
-QPlatformScreenBuffer::~QPlatformScreenBuffer()
-{
-
-}
-
-bool QPlatformScreenBuffer::isDestroyed() const
-{
-    return m_destroyed;
-}
-
-bool QPlatformScreenBuffer::isReady() const
-{
-    return m_ready;
-}
-
-void QPlatformScreenBuffer::aboutToBeDisplayed()
-{
-}
-
-void QPlatformScreenBuffer::displayed()
-{
-}
-
-
-/*!
-    \class QPlatformScreenPageFlipper
-    \since 5.0
-    \internal
-    \preliminary
-    \ingroup qpa
-
-    \brief The QPlatformScreenPageFlipper class provides an abstract interface for display buffer swapping
-
-    Implement the displayBuffer() function to initiate a buffer swap. The
-    bufferDisplayed() signal should be emitted once the buffer is actually displayed on
-    the screen. The bufferReleased() signal should be emitted when the buffer data is no
-    longer owned by the display hardware.
-*/
-
-QPlatformScreenPageFlipper::QPlatformScreenPageFlipper(QObject *parent)
-    :QObject(parent)
-{
-
-}
-
-/*!
-    \fn bool QPlatformScreenPageFlipper::displayBuffer(QPlatformScreenBuffer *buffer)
-
-    Implemented in subclasses to display \a buffer directly on the screen. Returns \c true
-    if it is possible to display the buffer, and \c false if the buffer cannot be displayed.
-
-    If this function returns \c true, the buffer must not be modified or destroyed before the
-    bufferReleased() signal is emitted.  The signal bufferDisplayed() is emitted when the buffer
-    is displayed on the screen. The two signals may be emitted in either order.
-
-    This function is allowed to block.
-*/
-
-QT_END_NAMESPACE
-
diff --git a/src/gui/kernel/qplatformscreenpageflipper.h b/src/gui/kernel/qplatformscreenpageflipper.h
deleted file mode 100644
index 232e37d24a..0000000000
--- a/src/gui/kernel/qplatformscreenpageflipper.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPLATFORMSCREENPAGEFLIPPER_H
-#define QPLATFORMSCREENPAGEFLIPPER_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is part of the QPA API and is not meant to be used
-// in applications. Usage of this API may make your code
-// source and binary incompatible with future versions of Qt.
-//
-
-#include <QtCore/QObject>
-
-QT_BEGIN_NAMESPACE
-
-class Q_GUI_EXPORT QPlatformScreenBuffer {
-public:
-    QPlatformScreenBuffer();
-    virtual ~QPlatformScreenBuffer();
-
-    bool isDestroyed() const;
-    bool isReady() const;
-
-    virtual void aboutToBeDisplayed();
-    virtual void displayed();
-    virtual void release() = 0;
-
-    virtual void *handle() const = 0;
-
-protected:
-    bool m_destroyed;
-    bool m_ready;
-};
-
-class Q_GUI_EXPORT QPlatformScreenPageFlipper : public QObject
-{
-    Q_OBJECT
-public:
-    explicit QPlatformScreenPageFlipper(QObject *parent = 0);
-
-    virtual bool displayBuffer(QPlatformScreenBuffer *) = 0;
-
-Q_SIGNALS:
-    void bufferDisplayed(QPlatformScreenBuffer *);
-    void bufferReleased(QPlatformScreenBuffer *);
-};
-
-QT_END_NAMESPACE
-
-#endif // QPLATFORMSCREENPAGEFLIPPER_H
diff --git a/src/gui/kernel/qplatformservices.cpp b/src/gui/kernel/qplatformservices.cpp
index d09b74c6fe..e11a1858f6 100644
--- a/src/gui/kernel/qplatformservices.cpp
+++ b/src/gui/kernel/qplatformservices.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformservices.h b/src/gui/kernel/qplatformservices.h
index 609a4a04be..00a87d51f5 100644
--- a/src/gui/kernel/qplatformservices.h
+++ b/src/gui/kernel/qplatformservices.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsessionmanager.cpp b/src/gui/kernel/qplatformsessionmanager.cpp
index 97c40d863c..123073d167 100644
--- a/src/gui/kernel/qplatformsessionmanager.cpp
+++ b/src/gui/kernel/qplatformsessionmanager.cpp
@@ -2,41 +2,33 @@
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
 ** Copyright (C) 2013 Teo Mrnjavac <teo@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsessionmanager.h b/src/gui/kernel/qplatformsessionmanager.h
index 80f1bcbaa0..6fdc681ce4 100644
--- a/src/gui/kernel/qplatformsessionmanager.h
+++ b/src/gui/kernel/qplatformsessionmanager.h
@@ -2,41 +2,33 @@
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
 ** Copyright (C) 2013 Teo Mrnjavac <teo@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsharedgraphicscache.cpp b/src/gui/kernel/qplatformsharedgraphicscache.cpp
index 23224008b9..932775e93d 100644
--- a/src/gui/kernel/qplatformsharedgraphicscache.cpp
+++ b/src/gui/kernel/qplatformsharedgraphicscache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsharedgraphicscache.h b/src/gui/kernel/qplatformsharedgraphicscache.h
index bb2dfe00e5..258054fbd5 100644
--- a/src/gui/kernel/qplatformsharedgraphicscache.h
+++ b/src/gui/kernel/qplatformsharedgraphicscache.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsurface.cpp b/src/gui/kernel/qplatformsurface.cpp
index 708d7cfafd..fa2f3505ba 100644
--- a/src/gui/kernel/qplatformsurface.cpp
+++ b/src/gui/kernel/qplatformsurface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsurface.h b/src/gui/kernel/qplatformsurface.h
index b96e494f74..915e91bbf1 100644
--- a/src/gui/kernel/qplatformsurface.h
+++ b/src/gui/kernel/qplatformsurface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsystemtrayicon_qpa.cpp b/src/gui/kernel/qplatformsystemtrayicon.cpp
index bc37f99210..7bc61e6e6e 100644
--- a/src/gui/kernel/qplatformsystemtrayicon_qpa.cpp
+++ b/src/gui/kernel/qplatformsystemtrayicon.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klaralvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformsystemtrayicon.h b/src/gui/kernel/qplatformsystemtrayicon.h
index 6bad643c7c..499b5fca17 100644
--- a/src/gui/kernel/qplatformsystemtrayicon.h
+++ b/src/gui/kernel/qplatformsystemtrayicon.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klaralvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformtheme.cpp b/src/gui/kernel/qplatformtheme.cpp
index d3d3d3c222..646bd90e56 100644
--- a/src/gui/kernel/qplatformtheme.cpp
+++ b/src/gui/kernel/qplatformtheme.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -508,7 +500,11 @@ QVariant QPlatformTheme::defaultThemeHint(ThemeHint hint)
     case MousePressAndHoldInterval:
         return QVariant(800);
     case MouseDoubleClickDistance:
-        return QVariant(5);
+        {
+            bool ok = false;
+            int dist = qgetenv("QT_DBL_CLICK_DIST").toInt(&ok);
+            return QVariant(ok ? dist : 5);
+        }
     }
     return QVariant();
 }
diff --git a/src/gui/kernel/qplatformtheme.h b/src/gui/kernel/qplatformtheme.h
index a2d14be0fb..a41dd8f257 100644
--- a/src/gui/kernel/qplatformtheme.h
+++ b/src/gui/kernel/qplatformtheme.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -276,6 +268,7 @@ public:
     virtual QPlatformMenuItem* createPlatformMenuItem() const;
     virtual QPlatformMenu* createPlatformMenu() const;
     virtual QPlatformMenuBar* createPlatformMenuBar() const;
+    virtual void showPlatformMenuBar() {}
 
     virtual bool usePlatformNativeDialog(DialogType type) const;
     virtual QPlatformDialogHelper *createPlatformDialogHelper(DialogType type) const;
diff --git a/src/gui/kernel/qplatformtheme_p.h b/src/gui/kernel/qplatformtheme_p.h
index f493037ddd..e8b118d7b3 100644
--- a/src/gui/kernel/qplatformtheme_p.h
+++ b/src/gui/kernel/qplatformtheme_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformthemefactory.cpp b/src/gui/kernel/qplatformthemefactory.cpp
index 20554f8915..4ac73394b5 100644
--- a/src/gui/kernel/qplatformthemefactory.cpp
+++ b/src/gui/kernel/qplatformthemefactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformthemefactory_p.h b/src/gui/kernel/qplatformthemefactory_p.h
index ad954f39b6..fc07080307 100644
--- a/src/gui/kernel/qplatformthemefactory_p.h
+++ b/src/gui/kernel/qplatformthemefactory_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformthemeplugin.cpp b/src/gui/kernel/qplatformthemeplugin.cpp
index ae3f435f1a..37406cebdc 100644
--- a/src/gui/kernel/qplatformthemeplugin.cpp
+++ b/src/gui/kernel/qplatformthemeplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformthemeplugin.h b/src/gui/kernel/qplatformthemeplugin.h
index cef5fb77b4..2b444f5ff6 100644
--- a/src/gui/kernel/qplatformthemeplugin.h
+++ b/src/gui/kernel/qplatformthemeplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qplatformwindow.cpp b/src/gui/kernel/qplatformwindow.cpp
index faaf418522..bd5e21c485 100644
--- a/src/gui/kernel/qplatformwindow.cpp
+++ b/src/gui/kernel/qplatformwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -474,6 +466,29 @@ QString QPlatformWindow::formatWindowTitle(const QString &title, const QString &
 }
 
 /*!
+    Helper function for finding the new screen for \a newGeometry in response to
+    a geometry changed event. Returns the new screen if the window was moved to
+    another virtual sibling. If the screen changes, the platform plugin should call
+    QWindowSystemInterface::handleWindowScreenChanged().
+    \note: The current screen will always be returned for child windows since
+    they should never signal screen changes.
+
+    \since 5.4
+    \sa QWindowSystemInterface::handleWindowScreenChanged()
+*/
+QPlatformScreen *QPlatformWindow::screenForGeometry(const QRect &newGeometry) const
+{
+    QPlatformScreen *currentScreen = screen();
+    if (!parent() && !currentScreen->geometry().intersects(newGeometry)) {
+        Q_FOREACH (QPlatformScreen* screen, currentScreen->virtualSiblings()) {
+            if (screen->geometry().intersects(newGeometry))
+                return screen;
+        }
+    }
+    return currentScreen;
+}
+
+/*!
     Reimplement this method to set whether the window demands attention
     (for example, by flashing the taskbar icon) depending on \a enabled.
 
diff --git a/src/gui/kernel/qplatformwindow.h b/src/gui/kernel/qplatformwindow.h
index 39bd8324a0..5c351a69d2 100644
--- a/src/gui/kernel/qplatformwindow.h
+++ b/src/gui/kernel/qplatformwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -139,6 +131,7 @@ public:
 
 protected:
     static QString formatWindowTitle(const QString &title, const QString &separator);
+    QPlatformScreen *screenForGeometry(const QRect &newGeometry) const;
 
     QScopedPointer<QPlatformWindowPrivate> d_ptr;
 private:
diff --git a/src/gui/kernel/qplatformwindow_p.h b/src/gui/kernel/qplatformwindow_p.h
index ac47afb6f1..32c09c24ca 100644
--- a/src/gui/kernel/qplatformwindow_p.h
+++ b/src/gui/kernel/qplatformwindow_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qrasterwindow.cpp b/src/gui/kernel/qrasterwindow.cpp
new file mode 100644
index 0000000000..f89f38a32d
--- /dev/null
+++ b/src/gui/kernel/qrasterwindow.cpp
@@ -0,0 +1,128 @@
+/****************************************************************************
+ **
+ ** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+ ** Contact: http://www.qt-project.org/legal
+ **
+ ** This file is part of the QtGui module of the Qt Toolkit.
+ **
+ ** $QT_BEGIN_LICENSE:LGPL21$
+ ** Commercial License Usage
+ ** Licensees holding valid commercial Qt licenses may use this file in
+ ** accordance with the commercial license agreement provided with the
+ ** Software or, alternatively, in accordance with the terms contained in
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
+ ** use the contact form at http://qt.digia.com/contact-us.
+ **
+ ** GNU Lesser General Public License Usage
+ ** Alternatively, this file may be used under the terms of the GNU Lesser
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ **
+ ** In addition, as a special exception, Digia gives you certain additional
+ ** rights. These rights are described in the Digia Qt LGPL Exception
+ ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+ **
+ ** $QT_END_LICENSE$
+ **
+ ****************************************************************************/
+
+#include "qrasterwindow.h"
+
+#include <QtGui/private/qpaintdevicewindow_p.h>
+
+#include <QtGui/QBackingStore>
+#include <QtGui/QPainter>
+
+QT_BEGIN_NAMESPACE
+
+/*!
+  \class QRasterWindow
+  \inmodule QtGui
+  \since 5.4
+  \brief QRasterWindow is a convenience class for using QPainter on a QWindow
+
+  QRasterWindow is a QWindow with a raster-based, non-OpenGL surface. On top of
+  the functionality offered by QWindow, QRasterWindow adds a virtual
+  paintEvent() function and the possibility to open a QPainter on itself. The
+  underlying paint engine will be the raster one, meaning that all drawing will
+  happen on the CPU. For performing accelerated, OpenGL-based drawing, use
+  QOpenGLWindow instead.
+
+  Internally the class is thin wrapper for QWindow and QBackingStore
+  and is very similar to the \l{Raster Window Example}{Raster Window
+  Example} that uses these classes directly.
+
+  \sa QPaintDeviceWindow::paintEvent(), QPaintDeviceWindow::update()
+*/
+
+class QRasterWindowPrivate : public QPaintDeviceWindowPrivate
+{
+    Q_DECLARE_PUBLIC(QRasterWindow)
+public:
+    void beginPaint(const QRegion &region) Q_DECL_OVERRIDE
+    {
+        Q_Q(QRasterWindow);
+        if (backingstore->size() != q->size()) {
+            backingstore->resize(q->size());
+            markWindowAsDirty();
+        }
+        backingstore->beginPaint(region);
+    }
+
+    void endPaint() Q_DECL_OVERRIDE
+    {
+        backingstore->endPaint();
+    }
+
+    void flush(const QRegion &region) Q_DECL_OVERRIDE
+    {
+        Q_Q(QRasterWindow);
+        backingstore->flush(region, q);
+    }
+
+    QScopedPointer<QBackingStore> backingstore;
+};
+
+/*!
+  Constructs a new QRasterWindow with \a parent.
+*/
+QRasterWindow::QRasterWindow(QWindow *parent)
+    : QPaintDeviceWindow(*(new QRasterWindowPrivate), parent)
+{
+    setSurfaceType(QSurface::RasterSurface);
+    d_func()->backingstore.reset(new QBackingStore(this));
+}
+
+/*!
+  \internal
+*/
+int QRasterWindow::metric(PaintDeviceMetric metric) const
+{
+    Q_D(const QRasterWindow);
+
+    switch (metric) {
+    case PdmDepth:
+        return d->backingstore->paintDevice()->depth();
+    case PdmDevicePixelRatio:
+        return d->backingstore->paintDevice()->devicePixelRatio();
+    default:
+        break;
+    }
+    return QPaintDeviceWindow::metric(metric);
+}
+
+/*!
+  \internal
+*/
+QPaintDevice *QRasterWindow::redirected(QPoint *) const
+{
+    Q_D(const QRasterWindow);
+    return d->backingstore->paintDevice();
+}
+
+QT_END_NAMESPACE
diff --git a/src/gui/kernel/qrasterwindow.h b/src/gui/kernel/qrasterwindow.h
new file mode 100644
index 0000000000..aa86d991a9
--- /dev/null
+++ b/src/gui/kernel/qrasterwindow.h
@@ -0,0 +1,61 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QRASTERWINDOW_H
+#define QRASTERWINDOW_H
+
+#include <QtGui/QPaintDeviceWindow>
+
+QT_BEGIN_NAMESPACE
+
+class QRasterWindowPrivate;
+
+class Q_GUI_EXPORT QRasterWindow : public QPaintDeviceWindow
+{
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(QRasterWindow)
+
+public:
+    explicit QRasterWindow(QWindow *parent = 0);
+
+protected:
+    int metric(PaintDeviceMetric metric) const Q_DECL_OVERRIDE;
+    QPaintDevice *redirected(QPoint *) const Q_DECL_OVERRIDE;
+
+private:
+    Q_DISABLE_COPY(QRasterWindow)
+};
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/gui/kernel/qscreen.cpp b/src/gui/kernel/qscreen.cpp
index 70ee631fc8..ed6e8ddccc 100644
--- a/src/gui/kernel/qscreen.cpp
+++ b/src/gui/kernel/qscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,6 +66,16 @@ QScreen::QScreen(QPlatformScreen *screen)
 {
 }
 
+
+/*!
+    Destroys the screen.
+ */
+QScreen::~QScreen()
+{
+    if (qApp)
+        Q_EMIT qApp->screenRemoved(this);
+}
+
 /*!
   Get the platform screen handle.
 */
diff --git a/src/gui/kernel/qscreen.h b/src/gui/kernel/qscreen.h
index bdd5939657..766b3d8f6b 100644
--- a/src/gui/kernel/qscreen.h
+++ b/src/gui/kernel/qscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,11 +61,11 @@ class Q_GUI_EXPORT QScreen : public QObject
     Q_PROPERTY(QString name READ name CONSTANT)
     Q_PROPERTY(int depth READ depth CONSTANT)
     Q_PROPERTY(QSize size READ size NOTIFY geometryChanged)
-    Q_PROPERTY(QSize availableSize READ availableSize NOTIFY virtualGeometryChanged)
+    Q_PROPERTY(QSize availableSize READ availableSize NOTIFY availableGeometryChanged)
     Q_PROPERTY(QSize virtualSize READ virtualSize NOTIFY virtualGeometryChanged)
     Q_PROPERTY(QSize availableVirtualSize READ availableVirtualSize NOTIFY virtualGeometryChanged)
     Q_PROPERTY(QRect geometry READ geometry NOTIFY geometryChanged)
-    Q_PROPERTY(QRect availableGeometry READ availableGeometry NOTIFY virtualGeometryChanged)
+    Q_PROPERTY(QRect availableGeometry READ availableGeometry NOTIFY availableGeometryChanged)
     Q_PROPERTY(QRect virtualGeometry READ virtualGeometry NOTIFY virtualGeometryChanged)
     Q_PROPERTY(QRect availableVirtualGeometry READ availableVirtualGeometry NOTIFY virtualGeometryChanged)
     Q_PROPERTY(QSizeF physicalSize READ physicalSize NOTIFY physicalSizeChanged)
@@ -89,6 +81,7 @@ class Q_GUI_EXPORT QScreen : public QObject
     Q_PROPERTY(qreal refreshRate READ refreshRate NOTIFY refreshRateChanged)
 
 public:
+    ~QScreen();
     QPlatformScreen *handle() const;
 
     QString name() const;
@@ -141,6 +134,7 @@ public:
 
 Q_SIGNALS:
     void geometryChanged(const QRect &geometry);
+    void availableGeometryChanged(const QRect &geometry);
     void physicalSizeChanged(const QSizeF &size);
     void physicalDotsPerInchChanged(qreal dpi);
     void logicalDotsPerInchChanged(qreal dpi);
diff --git a/src/gui/kernel/qscreen_p.h b/src/gui/kernel/qscreen_p.h
index 3e5feb2932..cdb923c429 100644
--- a/src/gui/kernel/qscreen_p.h
+++ b/src/gui/kernel/qscreen_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,11 +59,11 @@ public:
         : platformScreen(screen)
         , orientationUpdateMask(0)
     {
-        orientation = screen->orientation();
-        geometry = screen->geometry();
-        availableGeometry = screen->availableGeometry();
-        logicalDpi = screen->logicalDpi();
-        refreshRate = screen->refreshRate();
+        orientation = platformScreen->orientation();
+        geometry = platformScreen->geometry();
+        availableGeometry = platformScreen->availableGeometry();
+        logicalDpi = platformScreen->logicalDpi();
+        refreshRate = platformScreen->refreshRate();
 
         updatePrimaryOrientation();
 
diff --git a/src/gui/kernel/qsessionmanager.cpp b/src/gui/kernel/qsessionmanager.cpp
index a428840ca8..b67ba4a5a6 100644
--- a/src/gui/kernel/qsessionmanager.cpp
+++ b/src/gui/kernel/qsessionmanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsessionmanager.h b/src/gui/kernel/qsessionmanager.h
index a1cd8741d2..5df7d80948 100644
--- a/src/gui/kernel/qsessionmanager.h
+++ b/src/gui/kernel/qsessionmanager.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsessionmanager_p.h b/src/gui/kernel/qsessionmanager_p.h
index dd249fdb67..9038325dba 100644
--- a/src/gui/kernel/qsessionmanager_p.h
+++ b/src/gui/kernel/qsessionmanager_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qshapedpixmapdndwindow.cpp b/src/gui/kernel/qshapedpixmapdndwindow.cpp
index b3e64b01d0..55a8aae33c 100644
--- a/src/gui/kernel/qshapedpixmapdndwindow.cpp
+++ b/src/gui/kernel/qshapedpixmapdndwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qshapedpixmapdndwindow_p.h b/src/gui/kernel/qshapedpixmapdndwindow_p.h
index 1b56f47bd5..b59305f055 100644
--- a/src/gui/kernel/qshapedpixmapdndwindow_p.h
+++ b/src/gui/kernel/qshapedpixmapdndwindow_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qshortcutmap.cpp b/src/gui/kernel/qshortcutmap.cpp
index c915ed3928..cad707ab70 100644
--- a/src/gui/kernel/qshortcutmap.cpp
+++ b/src/gui/kernel/qshortcutmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qshortcutmap_p.h b/src/gui/kernel/qshortcutmap_p.h
index 3959c2c502..b2e0945d4b 100644
--- a/src/gui/kernel/qshortcutmap_p.h
+++ b/src/gui/kernel/qshortcutmap_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsimpledrag.cpp b/src/gui/kernel/qsimpledrag.cpp
index d53239e74f..a2412008f8 100644
--- a/src/gui/kernel/qsimpledrag.cpp
+++ b/src/gui/kernel/qsimpledrag.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsimpledrag_p.h b/src/gui/kernel/qsimpledrag_p.h
index d17440f7a2..8ef8f99616 100644
--- a/src/gui/kernel/qsimpledrag_p.h
+++ b/src/gui/kernel/qsimpledrag_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qstylehints.cpp b/src/gui/kernel/qstylehints.cpp
index ac638f4905..65a710c3f7 100644
--- a/src/gui/kernel/qstylehints.cpp
+++ b/src/gui/kernel/qstylehints.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qstylehints.h b/src/gui/kernel/qstylehints.h
index 33fbe2965e..09807ecb24 100644
--- a/src/gui/kernel/qstylehints.h
+++ b/src/gui/kernel/qstylehints.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsurface.cpp b/src/gui/kernel/qsurface.cpp
index e7fd2f79a4..b16191e65a 100644
--- a/src/gui/kernel/qsurface.cpp
+++ b/src/gui/kernel/qsurface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsurface.h b/src/gui/kernel/qsurface.h
index c4a3276372..58b7ce018e 100644
--- a/src/gui/kernel/qsurface.h
+++ b/src/gui/kernel/qsurface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qsurfaceformat.cpp b/src/gui/kernel/qsurfaceformat.cpp
index 2b8e611dff..8049e303a7 100644
--- a/src/gui/kernel/qsurfaceformat.cpp
+++ b/src/gui/kernel/qsurfaceformat.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -196,6 +188,9 @@ public:
 
 /*!
     Constructs a default initialized QSurfaceFormat.
+
+    \note By default OpenGL 2.0 is requested since this provides the highest
+    grade of portability between platforms and OpenGL implementations.
 */
 QSurfaceFormat::QSurfaceFormat() : d(new QSurfaceFormatPrivate)
 {
@@ -730,6 +725,43 @@ int QSurfaceFormat::swapInterval() const
     return d->swapInterval;
 }
 
+Q_GLOBAL_STATIC(QSurfaceFormat, qt_default_surface_format)
+
+/*!
+    Sets the global default surface \a format.
+
+    This format is used by default in QOpenGLContext, QWindow, QOpenGLWidget and
+    similar classes.
+
+    It can always be overridden on a per-instance basis by using the class in
+    question's own setFormat() function. However, it is often more convenient to
+    set the format for all windows once at the start of the application. It also
+    guarantees proper behavior in cases where shared contexts are required,
+    because settings the format via this function guarantees that all contexts
+    and surfaces, even the ones created internally by Qt, will use the same
+    format.
+
+    \since 5.4
+    \sa defaultFormat()
+ */
+void QSurfaceFormat::setDefaultFormat(const QSurfaceFormat &format)
+{
+    *qt_default_surface_format() = format;
+}
+
+/*!
+    Returns the global default surface format.
+
+    When setDefaultFormat() is not called, this is a default-constructed QSurfaceFormat.
+
+    \since 5.4
+    \sa setDefaultFormat()
+ */
+QSurfaceFormat QSurfaceFormat::defaultFormat()
+{
+    return *qt_default_surface_format();
+}
+
 /*!
     Returns \c true if all the options of the two QSurfaceFormat objects
     \a a and \a b are equal.
diff --git a/src/gui/kernel/qsurfaceformat.h b/src/gui/kernel/qsurfaceformat.h
index 453beac5cd..797331e5a7 100644
--- a/src/gui/kernel/qsurfaceformat.h
+++ b/src/gui/kernel/qsurfaceformat.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -138,6 +130,9 @@ public:
     int swapInterval() const;
     void setSwapInterval(int interval);
 
+    static void setDefaultFormat(const QSurfaceFormat &format);
+    static QSurfaceFormat defaultFormat();
+
 private:
     QSurfaceFormatPrivate *d;
 
diff --git a/src/gui/kernel/qt_gui_pch.h b/src/gui/kernel/qt_gui_pch.h
index 6cb106bbbd..38ded60818 100644
--- a/src/gui/kernel/qt_gui_pch.h
+++ b/src/gui/kernel/qt_gui_pch.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qtouchdevice.cpp b/src/gui/kernel/qtouchdevice.cpp
index 117f2c5e76..8641af149e 100644
--- a/src/gui/kernel/qtouchdevice.cpp
+++ b/src/gui/kernel/qtouchdevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qtouchdevice.h b/src/gui/kernel/qtouchdevice.h
index 6aca93907c..f6ab12d65b 100644
--- a/src/gui/kernel/qtouchdevice.h
+++ b/src/gui/kernel/qtouchdevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qtouchdevice_p.h b/src/gui/kernel/qtouchdevice_p.h
index fb87f49736..18a2291147 100644
--- a/src/gui/kernel/qtouchdevice_p.h
+++ b/src/gui/kernel/qtouchdevice_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qwindow.cpp b/src/gui/kernel/qwindow.cpp
index 6724d68c95..f52e12c6a8 100644
--- a/src/gui/kernel/qwindow.cpp
+++ b/src/gui/kernel/qwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -83,14 +75,14 @@ QT_BEGIN_NAMESPACE
     are useful reference examples for how to render to a QWindow using
     either approach.
 
-    \section1 Resource management
+    \section1 Resource Management
 
     Windows can potentially use a lot of memory. A usual measurement is
     width times height times color depth. A window might also include multiple
     buffers to support double and triple buffering, as well as depth and stencil
     buffers. To release a window's memory resources, call the destroy() function.
 
-    \section1 Content orientation
+    \section1 Content Orientation
 
     QWindow has reportContentOrientationChange() that can be used to specify
     the layout of the window contents in relation to the screen. The content
@@ -101,7 +93,7 @@ QT_BEGIN_NAMESPACE
     system might use this value to determine the layout of system popups or
     dialogs.
 
-    \section1 Visibility and Windowing system exposure.
+    \section1 Visibility and Windowing System Exposure
 
     By default, the window is not visible, and you must call setVisible(true),
     or show() or similar to make it visible. To make a window hidden again,
@@ -131,7 +123,7 @@ QT_BEGIN_NAMESPACE
     isExposed() changes, reimplement exposeEvent(). The window will always get
     a resize event before the first expose event.
 
-    \section1 Initial geometry
+    \section1 Initial Geometry
 
     If the window's width and height are left uninitialized, the window will
     get a reasonable default geometry from the platform window. If the position
@@ -156,9 +148,7 @@ QWindow::QWindow(QScreen *targetScreen)
     , QSurface(QSurface::Window)
 {
     Q_D(QWindow);
-    d->screen = targetScreen;
-    if (!d->screen)
-        d->screen = QGuiApplication::primaryScreen();
+    d->connectToScreen(targetScreen ? targetScreen : QGuiApplication::primaryScreen());
     d->init();
 }
 
@@ -178,10 +168,8 @@ QWindow::QWindow(QWindow *parent)
 {
     Q_D(QWindow);
     d->parentWindow = parent;
-    if (parent)
-        d->screen = parent->screen();
-    if (!d->screen)
-        d->screen = QGuiApplication::primaryScreen();
+    if (!parent)
+        d->connectToScreen(QGuiApplication::primaryScreen());
     d->init();
 }
 
@@ -203,10 +191,8 @@ QWindow::QWindow(QWindowPrivate &dd, QWindow *parent)
 {
     Q_D(QWindow);
     d->parentWindow = parent;
-    if (parent)
-        d->screen = parent->screen();
-    if (!d->screen)
-        d->screen = QGuiApplication::primaryScreen();
+    if (!parent)
+        d->connectToScreen(QGuiApplication::primaryScreen());
     d->init();
 }
 
@@ -215,14 +201,8 @@ QWindow::QWindow(QWindowPrivate &dd, QWindow *parent)
 */
 QWindow::~QWindow()
 {
-    if (QGuiApplicationPrivate::focus_window == this)
-        QGuiApplicationPrivate::focus_window = 0;
-    if (QGuiApplicationPrivate::currentMouseWindow == this)
-        QGuiApplicationPrivate::currentMouseWindow = 0;
-    if (QGuiApplicationPrivate::tabletPressTarget == this)
-        QGuiApplicationPrivate::tabletPressTarget = 0;
-    QGuiApplicationPrivate::window_list.removeAll(this);
     destroy();
+    QGuiApplicationPrivate::window_list.removeAll(this);
 }
 
 void QWindowPrivate::init()
@@ -231,12 +211,13 @@ void QWindowPrivate::init()
 
     // If your application aborts here, you are probably creating a QWindow
     // before the screen list is populated.
-    if (!screen) {
+    if (!parentWindow && !topLevelScreen) {
         qFatal("Cannot create window: no screens available");
         exit(1);
     }
-    QObject::connect(screen, SIGNAL(destroyed(QObject*)), q, SLOT(screenDestroyed(QObject*)));
     QGuiApplicationPrivate::window_list.prepend(q);
+
+    requestedFormat = QSurfaceFormat::defaultFormat();
 }
 
 /*!
@@ -353,23 +334,57 @@ void QWindowPrivate::updateVisibility()
         emit q->visibilityChanged(visibility);
 }
 
-void QWindowPrivate::setScreen(QScreen *newScreen, bool recreate)
+inline bool QWindowPrivate::windowRecreationRequired(QScreen *newScreen) const
+{
+    Q_Q(const QWindow);
+    const QScreen *oldScreen = q->screen();
+    return oldScreen != newScreen && platformWindow
+        && !(oldScreen && oldScreen->virtualSiblings().contains(newScreen));
+}
+
+inline void QWindowPrivate::disconnectFromScreen()
+{
+    if (topLevelScreen) {
+        Q_Q(QWindow);
+        QObject::disconnect(topLevelScreen, &QObject::destroyed, q, &QWindow::screenDestroyed);
+        topLevelScreen = 0;
+    }
+}
+
+void QWindowPrivate::connectToScreen(QScreen *screen)
+{
+    Q_Q(QWindow);
+    disconnectFromScreen();
+    topLevelScreen = screen;
+    if (topLevelScreen)
+        QObject::connect(topLevelScreen, &QObject::destroyed, q, &QWindow::screenDestroyed);
+}
+
+void QWindowPrivate::emitScreenChangedRecursion(QScreen *newScreen)
+{
+    Q_Q(QWindow);
+    emit q->screenChanged(newScreen);
+    foreach (QObject *child, q->children()) {
+        if (child->isWindowType())
+            static_cast<QWindow *>(child)->d_func()->emitScreenChangedRecursion(newScreen);
+    }
+}
+
+void QWindowPrivate::setTopLevelScreen(QScreen *newScreen, bool recreate)
 {
     Q_Q(QWindow);
-    if (newScreen != screen) {
-        const bool shouldRecreate = recreate && platformWindow != 0
-            && !(screen && screen->virtualSiblings().contains(newScreen));
+    if (parentWindow) {
+        qWarning() << this << Q_FUNC_INFO << '(' << newScreen << "): Attempt to set a screen on a child window.";
+        return;
+    }
+    if (newScreen != topLevelScreen) {
+        const bool shouldRecreate = recreate && windowRecreationRequired(newScreen);
         if (shouldRecreate)
             q->destroy();
-        if (screen)
-            q->disconnect(screen, SIGNAL(destroyed(QObject*)), q, SLOT(screenDestroyed(QObject*)));
-        screen = newScreen;
-        if (newScreen) {
-            q->connect(screen, SIGNAL(destroyed(QObject*)), q, SLOT(screenDestroyed(QObject*)));
-            if (shouldRecreate)
-                create(true);
-        }
-        emit q->screenChanged(newScreen);
+        connectToScreen(newScreen);
+        if (newScreen && shouldRecreate)
+            create(true);
+        emitScreenChangedRecursion(newScreen);
     }
 }
 
@@ -455,11 +470,14 @@ void QWindow::setVisible(bool visible)
         QCoreApplication::removePostedEvents(qApp, QEvent::Quit);
 
         if (type() == Qt::Window) {
-            QString &firstWindowTitle = QGuiApplicationPrivate::instance()->firstWindowTitle;
+            QGuiApplicationPrivate *app_priv = QGuiApplicationPrivate::instance();
+            QString &firstWindowTitle = app_priv->firstWindowTitle;
             if (!firstWindowTitle.isEmpty()) {
                 setTitle(firstWindowTitle);
                 firstWindowTitle = QString();
             }
+            if (!app_priv->forcedWindowIcon.isNull())
+                setIcon(app_priv->forcedWindowIcon);
         }
 
         QShowEvent showEvent;
@@ -557,8 +575,20 @@ QWindow *QWindow::parent() const
 void QWindow::setParent(QWindow *parent)
 {
     Q_D(QWindow);
+    if (d->parentWindow == parent)
+        return;
+
+    QScreen *newScreen = parent ? parent->screen() : screen();
+    if (d->windowRecreationRequired(newScreen)) {
+        qWarning() << this << Q_FUNC_INFO << '(' << parent << "): Cannot change screens (" << screen() << newScreen << ')';
+        return;
+    }
 
     QObject::setParent(parent);
+    if (parent)
+        d->disconnectFromScreen();
+    else
+        d->connectToScreen(newScreen);
 
     if (d->platformWindow) {
         if (parent && parent->d_func()->platformWindow) {
@@ -644,7 +674,13 @@ void QWindow::setModality(Qt::WindowModality modality)
     this function after create() has been called will not re-resolve the
     surface format of the native surface.
 
-    \sa create(), destroy()
+    When the format is not explicitly set via this function, the format returned
+    by QSurfaceFormat::defaultFormat() will be used. This means that when having
+    multiple windows, individual calls to this function can be replaced by one
+    single call to QSurfaceFormat::setDefaultFormat() before creating the first
+    window.
+
+    \sa create(), destroy(), QSurfaceFormat::setDefaultFormat()
 */
 void QWindow::setFormat(const QSurfaceFormat &format)
 {
@@ -1532,21 +1568,36 @@ void QWindow::resize(const QSize &newSize)
 void QWindow::destroy()
 {
     Q_D(QWindow);
+    if (!d->platformWindow)
+        return;
+
     QObjectList childrenWindows = children();
     for (int i = 0; i < childrenWindows.size(); i++) {
         QObject *object = childrenWindows.at(i);
         if (object->isWindowType()) {
             QWindow *w = static_cast<QWindow*>(object);
-            QGuiApplicationPrivate::window_list.removeAll(w);
             w->destroy();
         }
     }
+
+    if (QGuiApplicationPrivate::focus_window == this)
+        QGuiApplicationPrivate::focus_window = parent();
+    if (QGuiApplicationPrivate::currentMouseWindow == this)
+        QGuiApplicationPrivate::currentMouseWindow = parent();
+    if (QGuiApplicationPrivate::tabletPressTarget == this)
+        QGuiApplicationPrivate::tabletPressTarget = parent();
+
+    bool wasVisible = isVisible();
+
     setVisible(false);
     delete d->platformWindow;
     d->resizeEventPending = true;
     d->receivedExpose = false;
     d->exposed = false;
     d->platformWindow = 0;
+
+    if (wasVisible)
+        d->maybeQuitOnLastWindowClosed();
 }
 
 /*!
@@ -1613,15 +1664,14 @@ bool QWindow::setMouseGrabEnabled(bool grab)
 /*!
     Returns the screen on which the window is shown.
 
-    The value returned will not change when the window is moved
-    between virtual screens (as returned by QScreen::virtualSiblings()).
+    For child windows, this returns the screen of the corresponding top level window.
 
     \sa setScreen(), QScreen::virtualSiblings()
 */
 QScreen *QWindow::screen() const
 {
     Q_D(const QWindow);
-    return d->screen;
+    return d->parentWindow ? d->parentWindow->screen() : d->topLevelScreen;
 }
 
 /*!
@@ -1632,6 +1682,8 @@ QScreen *QWindow::screen() const
     Note that if the screen is part of a virtual desktop of multiple screens,
     the window can appear on any of the screens returned by QScreen::virtualSiblings().
 
+    This function only works for top level windows.
+
     \sa screen(), QScreen::virtualSiblings()
 */
 void QWindow::setScreen(QScreen *newScreen)
@@ -1639,13 +1691,15 @@ void QWindow::setScreen(QScreen *newScreen)
     Q_D(QWindow);
     if (!newScreen)
         newScreen = QGuiApplication::primaryScreen();
-    d->setScreen(newScreen, true /* recreate */);
+    d->setTopLevelScreen(newScreen, true /* recreate */);
 }
 
 void QWindow::screenDestroyed(QObject *object)
 {
     Q_D(QWindow);
-    if (object == static_cast<QObject *>(d->screen)) {
+    if (d->parentWindow)
+        return;
+    if (object == static_cast<QObject *>(d->topLevelScreen)) {
         const bool wasVisible = isVisible();
         setScreen(0);
         // destroy() might have hidden our window, show it again.
@@ -1801,15 +1855,13 @@ bool QWindow::close()
     if (parent())
         return false;
 
-    if (QGuiApplicationPrivate::focus_window == this)
-        QGuiApplicationPrivate::focus_window = 0;
-    if (QGuiApplicationPrivate::currentMouseWindow == this)
-        QGuiApplicationPrivate::currentMouseWindow = 0;
+    if (!d->platformWindow)
+        return true;
 
-    QGuiApplicationPrivate::window_list.removeAll(this);
-    destroy();
-    d->maybeQuitOnLastWindowClosed();
-    return true;
+    bool accepted = false;
+    QWindowSystemInterface::handleCloseEvent(this, &accepted);
+    QWindowSystemInterface::flushWindowSystemEvents();
+    return accepted;
 }
 
 /*!
@@ -1955,15 +2007,10 @@ bool QWindow::event(QEvent *ev)
         break;
 #endif
 
-    case QEvent::Close: {
-        Q_D(QWindow);
-        bool wasVisible = isVisible();
-        if (ev->isAccepted()) {
+    case QEvent::Close:
+        if (ev->isAccepted())
             destroy();
-            if (wasVisible)
-                d->maybeQuitOnLastWindowClosed();
-        }
-        break; }
+        break;
 
     case QEvent::Expose:
         exposeEvent(static_cast<QExposeEvent *>(ev));
@@ -2175,8 +2222,10 @@ Q_GUI_EXPORT QWindowPrivate *qt_window_private(QWindow *window)
 
 void QWindowPrivate::maybeQuitOnLastWindowClosed()
 {
-    Q_Q(QWindow);
+    if (!QCoreApplication::instance())
+        return;
 
+    Q_Q(QWindow);
     // Attempt to close the application only if this has WA_QuitOnClose set and a non-visible parent
     bool quitOnClose = QGuiApplication::quitOnLastWindowClosed() && !q->parent();
 
@@ -2335,7 +2384,7 @@ void QWindowPrivate::setCursor(const QCursor *newCursor)
         hasCursor = false;
     }
     // Only attempt to set cursor and emit signal if there is an actual platform cursor
-    if (screen->handle()->cursor()) {
+    if (q->screen()->handle()->cursor()) {
         applyCursor();
         QEvent event(QEvent::CursorChange);
         QGuiApplication::sendEvent(q, &event);
@@ -2346,7 +2395,7 @@ void QWindowPrivate::applyCursor()
 {
     Q_Q(QWindow);
     if (platformWindow) {
-        if (QPlatformCursor *platformCursor = screen->handle()->cursor()) {
+        if (QPlatformCursor *platformCursor = q->screen()->handle()->cursor()) {
             QCursor *c = QGuiApplication::overrideCursor();
             if (!c && hasCursor)
                 c = &cursor;
diff --git a/src/gui/kernel/qwindow.h b/src/gui/kernel/qwindow.h
index 40bfad908f..7cd25b010f 100644
--- a/src/gui/kernel/qwindow.h
+++ b/src/gui/kernel/qwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qwindow_p.h b/src/gui/kernel/qwindow_p.h
index 51d78bb9cd..46dc2e463c 100644
--- a/src/gui/kernel/qwindow_p.h
+++ b/src/gui/kernel/qwindow_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -95,11 +87,12 @@ public:
         , modality(Qt::NonModal)
         , blockedByModalWindow(false)
         , transientParent(0)
-        , screen(0)
+        , topLevelScreen(0)
 #ifndef QT_NO_CURSOR
         , cursor(Qt::ArrowCursor)
         , hasCursor(false)
 #endif
+        , compositing(false)
     {
         isWindow = true;
     }
@@ -131,8 +124,12 @@ public:
     void updateVisibility();
     void _q_clearAlert();
 
-    void setScreen(QScreen *newScreen, bool recreate);
+    bool windowRecreationRequired(QScreen *newScreen) const;
     void create(bool recursive);
+    void setTopLevelScreen(QScreen *newScreen, bool recreate);
+    void connectToScreen(QScreen *topLevelScreen);
+    void disconnectFromScreen();
+    void emitScreenChangedRecursion(QScreen *newScreen);
 
     virtual void clearFocusObject();
 
@@ -166,12 +163,14 @@ public:
     bool blockedByModalWindow;
 
     QPointer<QWindow> transientParent;
-    QScreen *screen;
+    QScreen *topLevelScreen;
 
 #ifndef QT_NO_CURSOR
     QCursor cursor;
     bool hasCursor;
 #endif
+
+    bool compositing;
 };
 
 
diff --git a/src/gui/kernel/qwindowdefs.h b/src/gui/kernel/qwindowdefs.h
index 42f4bc7c9b..28bb665988 100644
--- a/src/gui/kernel/qwindowdefs.h
+++ b/src/gui/kernel/qwindowdefs.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/kernel/qwindowdefs_win.h b/src/gui/kernel/qwindowdefs_win.h
index fea995a0f5..21bcbf9463 100644
--- a/src/gui/kernel/qwindowdefs_win.h
+++ b/src/gui/kernel/qwindowdefs_win.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -107,7 +99,7 @@ Q_DECLARE_HANDLE(HRGN);
 #ifndef HMONITOR
 Q_DECLARE_HANDLE(HMONITOR);
 #endif
-#ifndef HRESULT
+#ifndef _HRESULT_DEFINED
 typedef long HRESULT;
 #endif
 
diff --git a/src/gui/kernel/qwindowsysteminterface.cpp b/src/gui/kernel/qwindowsysteminterface.cpp
index 49ff8bcb0d..d03a3f7be8 100644
--- a/src/gui/kernel/qwindowsysteminterface.cpp
+++ b/src/gui/kernel/qwindowsysteminterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -133,11 +125,11 @@ void QWindowSystemInterface::handleWindowScreenChanged(QWindow *tlw, QScreen *sc
     QWindowSystemInterfacePrivate::handleWindowSystemEvent(e);
 }
 
-void QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState newState)
+void QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState newState, bool forcePropagate)
 {
     Q_ASSERT(QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::ApplicationState));
     QWindowSystemInterfacePrivate::ApplicationStateChangedEvent *e =
-        new QWindowSystemInterfacePrivate::ApplicationStateChangedEvent(newState);
+        new QWindowSystemInterfacePrivate::ApplicationStateChangedEvent(newState, forcePropagate);
     QWindowSystemInterfacePrivate::handleWindowSystemEvent(e);
 }
 
@@ -493,17 +485,10 @@ void QWindowSystemInterface::handleScreenOrientationChange(QScreen *screen, Qt::
     QWindowSystemInterfacePrivate::handleWindowSystemEvent(e);
 }
 
-void QWindowSystemInterface::handleScreenGeometryChange(QScreen *screen, const QRect &geometry)
+void QWindowSystemInterface::handleScreenGeometryChange(QScreen *screen, const QRect &geometry, const QRect &availableGeometry)
 {
     QWindowSystemInterfacePrivate::ScreenGeometryEvent *e =
-            new QWindowSystemInterfacePrivate::ScreenGeometryEvent(screen, geometry);
-    QWindowSystemInterfacePrivate::handleWindowSystemEvent(e);
-}
-
-void QWindowSystemInterface::handleScreenAvailableGeometryChange(QScreen *screen, const QRect &availableGeometry)
-{
-    QWindowSystemInterfacePrivate::ScreenAvailableGeometryEvent *e =
-            new QWindowSystemInterfacePrivate::ScreenAvailableGeometryEvent(screen, availableGeometry);
+            new QWindowSystemInterfacePrivate::ScreenGeometryEvent(screen, geometry, availableGeometry);
     QWindowSystemInterfacePrivate::handleWindowSystemEvent(e);
 }
 
@@ -629,24 +614,42 @@ void QWindowSystemInterface::handleFileOpenEvent(const QUrl &url)
     QGuiApplicationPrivate::processWindowSystemEvent(&e);
 }
 
-void QWindowSystemInterface::handleTabletEvent(QWindow *w, ulong timestamp, bool down, const QPointF &local, const QPointF &global,
-                                               int device, int pointerType, qreal pressure, int xTilt, int yTilt,
+void QWindowSystemInterface::handleTabletEvent(QWindow *w, ulong timestamp, const QPointF &local, const QPointF &global,
+                                               int device, int pointerType, Qt::MouseButtons buttons, qreal pressure, int xTilt, int yTilt,
                                                qreal tangentialPressure, qreal rotation, int z, qint64 uid,
                                                Qt::KeyboardModifiers modifiers)
 {
     QWindowSystemInterfacePrivate::TabletEvent *e =
-            new QWindowSystemInterfacePrivate::TabletEvent(w, timestamp, down, local, global, device, pointerType, pressure,
+            new QWindowSystemInterfacePrivate::TabletEvent(w, timestamp, local, global, device, pointerType, buttons, pressure,
                                                            xTilt, yTilt, tangentialPressure, rotation, z, uid, modifiers);
     QWindowSystemInterfacePrivate::handleWindowSystemEvent(e);
 }
 
+void QWindowSystemInterface::handleTabletEvent(QWindow *w, const QPointF &local, const QPointF &global,
+                                               int device, int pointerType, Qt::MouseButtons buttons, qreal pressure, int xTilt, int yTilt,
+                                               qreal tangentialPressure, qreal rotation, int z, qint64 uid,
+                                               Qt::KeyboardModifiers modifiers)
+{
+    ulong time = QWindowSystemInterfacePrivate::eventTime.elapsed();
+    handleTabletEvent(w, time, local, global, device, pointerType, buttons, pressure,
+                      xTilt, yTilt, tangentialPressure, rotation, z, uid, modifiers);
+}
+
+void QWindowSystemInterface::handleTabletEvent(QWindow *w, ulong timestamp, bool down, const QPointF &local, const QPointF &global,
+                                               int device, int pointerType, qreal pressure, int xTilt, int yTilt,
+                                               qreal tangentialPressure, qreal rotation, int z, qint64 uid,
+                                               Qt::KeyboardModifiers modifiers)
+{
+    handleTabletEvent(w, timestamp, local, global, device, pointerType, (down ? Qt::LeftButton : Qt::NoButton), pressure,
+                      xTilt, yTilt, tangentialPressure, rotation, z, uid, modifiers);
+}
+
 void QWindowSystemInterface::handleTabletEvent(QWindow *w, bool down, const QPointF &local, const QPointF &global,
                                                int device, int pointerType, qreal pressure, int xTilt, int yTilt,
                                                qreal tangentialPressure, qreal rotation, int z, qint64 uid,
                                                Qt::KeyboardModifiers modifiers)
 {
-    ulong time = QWindowSystemInterfacePrivate::eventTime.elapsed();
-    handleTabletEvent(w, time, down, local, global, device, pointerType, pressure,
+    handleTabletEvent(w, local, global, device, pointerType, (down ? Qt::LeftButton : Qt::NoButton), pressure,
                       xTilt, yTilt, tangentialPressure, rotation, z, uid, modifiers);
 }
 
diff --git a/src/gui/kernel/qwindowsysteminterface.h b/src/gui/kernel/qwindowsysteminterface.h
index 71feb1bcb7..9784757d3a 100644
--- a/src/gui/kernel/qwindowsysteminterface.h
+++ b/src/gui/kernel/qwindowsysteminterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -138,6 +130,7 @@ public:
     static void handleTouchCancelEvent(QWindow *w, QTouchDevice *device, Qt::KeyboardModifiers mods = Qt::NoModifier);
     static void handleTouchCancelEvent(QWindow *w, ulong timestamp, QTouchDevice *device, Qt::KeyboardModifiers mods = Qt::NoModifier);
 
+    // rect is relative to parent
     static void handleGeometryChange(QWindow *w, const QRect &newRect, const QRect &oldRect = QRect());
     static void handleCloseEvent(QWindow *w, bool *accepted = 0);
     static void handleEnterEvent(QWindow *w, const QPointF &local = QPointF(), const QPointF& global = QPointF());
@@ -148,8 +141,9 @@ public:
     static void handleWindowStateChanged(QWindow *w, Qt::WindowState newState);
     static void handleWindowScreenChanged(QWindow *w, QScreen *newScreen);
 
-    static void handleApplicationStateChanged(Qt::ApplicationState newState);
+    static void handleApplicationStateChanged(Qt::ApplicationState newState, bool forcePropagate = false);
 
+    // region is in local coordinates, do not confuse with geometry which is parent-relative
     static void handleExposeEvent(QWindow *tlw, const QRegion &region);
 
 #ifndef QT_NO_DRAGANDDROP
@@ -162,8 +156,7 @@ public:
 
     // Changes to the screen
     static void handleScreenOrientationChange(QScreen *screen, Qt::ScreenOrientation newOrientation);
-    static void handleScreenGeometryChange(QScreen *screen, const QRect &newGeometry);
-    static void handleScreenAvailableGeometryChange(QScreen *screen, const QRect &newAvailableGeometry);
+    static void handleScreenGeometryChange(QScreen *screen, const QRect &newGeometry, const QRect &newAvailableGeometry);
     static void handleScreenLogicalDotsPerInchChange(QScreen *screen, qreal newDpiX, qreal newDpiY);
     static void handleScreenRefreshRateChange(QScreen *screen, qreal newRefreshRate);
 
@@ -172,14 +165,22 @@ public:
     static void handleFileOpenEvent(const QString& fileName);
     static void handleFileOpenEvent(const QUrl &url);
 
+    static void handleTabletEvent(QWindow *w, ulong timestamp, const QPointF &local, const QPointF &global,
+                                  int device, int pointerType, Qt::MouseButtons buttons, qreal pressure, int xTilt, int yTilt,
+                                  qreal tangentialPressure, qreal rotation, int z, qint64 uid,
+                                  Qt::KeyboardModifiers modifiers = Qt::NoModifier);
+    static void handleTabletEvent(QWindow *w, const QPointF &local, const QPointF &global,
+                                  int device, int pointerType, Qt::MouseButtons buttons, qreal pressure, int xTilt, int yTilt,
+                                  qreal tangentialPressure, qreal rotation, int z, qint64 uid,
+                                  Qt::KeyboardModifiers modifiers = Qt::NoModifier);
     static void handleTabletEvent(QWindow *w, ulong timestamp, bool down, const QPointF &local, const QPointF &global,
                                   int device, int pointerType, qreal pressure, int xTilt, int yTilt,
                                   qreal tangentialPressure, qreal rotation, int z, qint64 uid,
-                                  Qt::KeyboardModifiers modifiers = Qt::NoModifier);
+                                  Qt::KeyboardModifiers modifiers = Qt::NoModifier); // ### remove in Qt 6
     static void handleTabletEvent(QWindow *w, bool down, const QPointF &local, const QPointF &global,
                                   int device, int pointerType, qreal pressure, int xTilt, int yTilt,
                                   qreal tangentialPressure, qreal rotation, int z, qint64 uid,
-                                  Qt::KeyboardModifiers modifiers = Qt::NoModifier);
+                                  Qt::KeyboardModifiers modifiers = Qt::NoModifier); // ### remove in Qt 6
     static void handleTabletEnterProximityEvent(ulong timestamp, int device, int pointerType, qint64 uid);
     static void handleTabletEnterProximityEvent(int device, int pointerType, qint64 uid);
     static void handleTabletLeaveProximityEvent(ulong timestamp, int device, int pointerType, qint64 uid);
diff --git a/src/gui/kernel/qwindowsysteminterface_p.h b/src/gui/kernel/qwindowsysteminterface_p.h
index 8e503bbf3d..f48c75a027 100644
--- a/src/gui/kernel/qwindowsysteminterface_p.h
+++ b/src/gui/kernel/qwindowsysteminterface_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -176,11 +168,12 @@ public:
 
     class ApplicationStateChangedEvent : public WindowSystemEvent {
     public:
-        ApplicationStateChangedEvent(Qt::ApplicationState newState)
-            : WindowSystemEvent(ApplicationStateChanged), newState(newState)
+        ApplicationStateChangedEvent(Qt::ApplicationState newState, bool forcePropagate = false)
+            : WindowSystemEvent(ApplicationStateChanged), newState(newState), forcePropagate(forcePropagate)
         { }
 
         Qt::ApplicationState newState;
+        bool forcePropagate;
     };
 
     class FlushEventsEvent : public WindowSystemEvent {
@@ -278,17 +271,10 @@ public:
 
     class ScreenGeometryEvent : public WindowSystemEvent {
     public:
-        ScreenGeometryEvent(QScreen *s, const QRect &g)
-            : WindowSystemEvent(ScreenGeometry), screen(s), geometry(g) { }
+        ScreenGeometryEvent(QScreen *s, const QRect &g, const QRect &ag)
+            : WindowSystemEvent(ScreenGeometry), screen(s), geometry(g), availableGeometry(ag) { }
         QPointer<QScreen> screen;
         QRect geometry;
-    };
-
-    class ScreenAvailableGeometryEvent : public WindowSystemEvent {
-    public:
-        ScreenAvailableGeometryEvent(QScreen *s, const QRect &g)
-            : WindowSystemEvent(ScreenAvailableGeometry), screen(s), availableGeometry(g) { }
-        QPointer<QScreen> screen;
         QRect availableGeometry;
     };
 
@@ -337,19 +323,19 @@ public:
 
     class TabletEvent : public InputEvent {
     public:
-        static void handleTabletEvent(QWindow *w, bool down, const QPointF &local, const QPointF &global,
-                                      int device, int pointerType, qreal pressure, int xTilt, int yTilt,
+        static void handleTabletEvent(QWindow *w, const QPointF &local, const QPointF &global,
+                                      int device, int pointerType, Qt::MouseButtons buttons, qreal pressure, int xTilt, int yTilt,
                                       qreal tangentialPressure, qreal rotation, int z, qint64 uid,
                                       Qt::KeyboardModifiers modifiers = Qt::NoModifier);
 
-        TabletEvent(QWindow *w, ulong time, bool down, const QPointF &local, const QPointF &global,
-                    int device, int pointerType, qreal pressure, int xTilt, int yTilt, qreal tpressure,
+        TabletEvent(QWindow *w, ulong time, const QPointF &local, const QPointF &global,
+                    int device, int pointerType, Qt::MouseButtons b, qreal pressure, int xTilt, int yTilt, qreal tpressure,
                     qreal rotation, int z, qint64 uid, Qt::KeyboardModifiers mods)
             : InputEvent(w, time, Tablet, mods),
-              down(down), local(local), global(global), device(device), pointerType(pointerType),
+              buttons(b), local(local), global(global), device(device), pointerType(pointerType),
               pressure(pressure), xTilt(xTilt), yTilt(yTilt), tangentialPressure(tpressure),
               rotation(rotation), z(z), uid(uid) { }
-        bool down;
+        Qt::MouseButtons buttons;
         QPointF local;
         QPointF global;
         int device;
diff --git a/src/gui/math3d/qgenericmatrix.cpp b/src/gui/math3d/qgenericmatrix.cpp
index 1ccafa051b..995cf1716c 100644
--- a/src/gui/math3d/qgenericmatrix.cpp
+++ b/src/gui/math3d/qgenericmatrix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qgenericmatrix.h b/src/gui/math3d/qgenericmatrix.h
index c243647d33..5b45ab7fa1 100644
--- a/src/gui/math3d/qgenericmatrix.h
+++ b/src/gui/math3d/qgenericmatrix.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qmatrix4x4.cpp b/src/gui/math3d/qmatrix4x4.cpp
index 0b3c5b4cb9..c8a036918c 100644
--- a/src/gui/math3d/qmatrix4x4.cpp
+++ b/src/gui/math3d/qmatrix4x4.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1542,6 +1534,52 @@ void QMatrix4x4::lookAt(const QVector3D& eye, const QVector3D& center, const QVe
 #endif
 
 /*!
+    \fn void QMatrix4x4::viewport(const QRectF &rect)
+    \overload
+
+    Sets up viewport transform for viewport bounded by \a rect and with near and far set
+    to 0 and 1 respectively.
+*/
+
+/*!
+    Multiplies this matrix by another that performs the scale and bias
+    transformation used by OpenGL to transform from normalized device
+    coordinates (NDC) to viewport (window) coordinates. That is it maps
+    points from the cube ranging over [-1, 1] in each dimension to the
+    viewport with it's near-lower-left corner at (\a left, \a bottom, \a nearPlane)
+    and with size (\a width, \a height, \a farPlane - \a nearPlane).
+
+    This matches the transform used by the fixed function OpenGL viewport
+    transform controlled by the functions glViewport() and glDepthRange().
+ */
+void QMatrix4x4::viewport(float left, float bottom, float width, float height, float nearPlane, float farPlane)
+{
+    const float w2 = width / 2.0f;
+    const float h2 = height / 2.0f;
+
+    QMatrix4x4 m(1);
+    m.m[0][0] = w2;
+    m.m[1][0] = 0.0f;
+    m.m[2][0] = 0.0f;
+    m.m[3][0] = left + w2;
+    m.m[0][1] = 0.0f;
+    m.m[1][1] = h2;
+    m.m[2][1] = 0.0f;
+    m.m[3][1] = bottom + h2;
+    m.m[0][2] = 0.0f;
+    m.m[1][2] = 0.0f;
+    m.m[2][2] = (farPlane - nearPlane) / 2.0f;
+    m.m[3][2] = (nearPlane + farPlane) / 2.0f;
+    m.m[0][3] = 0.0f;
+    m.m[1][3] = 0.0f;
+    m.m[2][3] = 0.0f;
+    m.m[3][3] = 1.0f;
+    m.flagBits = General;
+
+    *this *= m;
+}
+
+/*!
     \deprecated
 
     Flips between right-handed and left-handed coordinate systems
diff --git a/src/gui/math3d/qmatrix4x4.h b/src/gui/math3d/qmatrix4x4.h
index d4ba7d64d8..31a4dbf1ca 100644
--- a/src/gui/math3d/qmatrix4x4.h
+++ b/src/gui/math3d/qmatrix4x4.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -148,6 +140,8 @@ public:
 #ifndef QT_NO_VECTOR3D
     void lookAt(const QVector3D& eye, const QVector3D& center, const QVector3D& up);
 #endif
+    void viewport(const QRectF &rect);
+    void viewport(float left, float bottom, float width, float height, float nearPlane = 0.0f, float farPlane = 1.0f);
     void flipCoordinates();
 
     void copyDataTo(float *values) const;
@@ -1077,6 +1071,11 @@ inline float *QMatrix4x4::data()
     return *m;
 }
 
+inline void QMatrix4x4::viewport(const QRectF &rect)
+{
+    viewport(rect.x(), rect.y(), rect.width(), rect.height());
+}
+
 #ifndef QT_NO_DEBUG_STREAM
 Q_GUI_EXPORT QDebug operator<<(QDebug dbg, const QMatrix4x4 &m);
 #endif
diff --git a/src/gui/math3d/qquaternion.cpp b/src/gui/math3d/qquaternion.cpp
index d721674eb6..f1af8922ca 100644
--- a/src/gui/math3d/qquaternion.cpp
+++ b/src/gui/math3d/qquaternion.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qquaternion.h b/src/gui/math3d/qquaternion.h
index c12b0f4fec..e0e52cefdd 100644
--- a/src/gui/math3d/qquaternion.h
+++ b/src/gui/math3d/qquaternion.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qvector2d.cpp b/src/gui/math3d/qvector2d.cpp
index a56e23eb72..c46dd35766 100644
--- a/src/gui/math3d/qvector2d.cpp
+++ b/src/gui/math3d/qvector2d.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qvector2d.h b/src/gui/math3d/qvector2d.h
index bd1d28274c..2cacd8ade0 100644
--- a/src/gui/math3d/qvector2d.h
+++ b/src/gui/math3d/qvector2d.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qvector3d.cpp b/src/gui/math3d/qvector3d.cpp
index 7e3ed7c61b..75d61e5f85 100644
--- a/src/gui/math3d/qvector3d.cpp
+++ b/src/gui/math3d/qvector3d.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qvector3d.h b/src/gui/math3d/qvector3d.h
index 51412a940a..40e9035621 100644
--- a/src/gui/math3d/qvector3d.h
+++ b/src/gui/math3d/qvector3d.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qvector4d.cpp b/src/gui/math3d/qvector4d.cpp
index 691551367f..3603f655cb 100644
--- a/src/gui/math3d/qvector4d.cpp
+++ b/src/gui/math3d/qvector4d.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/math3d/qvector4d.h b/src/gui/math3d/qvector4d.h
index 9ab0eba09f..291af5c072 100644
--- a/src/gui/math3d/qvector4d.h
+++ b/src/gui/math3d/qvector4d.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/opengl.pri b/src/gui/opengl/opengl.pri
index cadba26797..f82401c973 100644
--- a/src/gui/opengl/opengl.pri
+++ b/src/gui/opengl/opengl.pri
@@ -2,7 +2,6 @@
 
 contains(QT_CONFIG, opengl):CONFIG += opengl
 contains(QT_CONFIG, opengles2):CONFIG += opengles2
-contains(QT_CONFIG, egl):CONFIG += egl
 
 contains(QT_CONFIG, opengl)|contains(QT_CONFIG, opengles2) {
 
diff --git a/src/gui/opengl/qopengl.cpp b/src/gui/opengl/qopengl.cpp
index b452c605e3..2b23bb8346 100644
--- a/src/gui/opengl/qopengl.cpp
+++ b/src/gui/opengl/qopengl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,16 +47,17 @@ QOpenGLExtensionMatcher::QOpenGLExtensionMatcher()
 {
     QOpenGLContext *ctx = QOpenGLContext::currentContext();
     QOpenGLFunctions *funcs = ctx->functions();
-    const char *extensionStr = reinterpret_cast<const char *>(funcs->glGetString(GL_EXTENSIONS));
+    const char *extensionStr = 0;
+
+    if (ctx->isOpenGLES() || ctx->format().majorVersion() < 3)
+        extensionStr = reinterpret_cast<const char *>(funcs->glGetString(GL_EXTENSIONS));
 
     if (extensionStr) {
         QByteArray ba(extensionStr);
         QList<QByteArray> extensions = ba.split(' ');
         m_extensions = extensions.toSet();
-#if !defined(QT_OPENGL_3)
-    }
-#else
     } else {
+#ifdef QT_OPENGL_3
         // clear error state
         while (funcs->glGetError()) {}
 
@@ -82,8 +75,8 @@ QOpenGLExtensionMatcher::QOpenGLExtensionMatcher()
                 m_extensions.insert(str);
             }
         }
+#endif // QT_OPENGL_3
     }
-#endif
 }
 
 QT_END_NAMESPACE
diff --git a/src/gui/opengl/qopengl.h b/src/gui/opengl/qopengl.h
index ef5ab9aa65..555f4bbe09 100644
--- a/src/gui/opengl/qopengl.h
+++ b/src/gui/opengl/qopengl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,8 +59,13 @@
 
 #if defined(QT_OPENGL_ES_2)
 # if defined(Q_OS_MAC) // iOS
-#  include <OpenGLES/ES2/gl.h>
-#  include <OpenGLES/ES2/glext.h>
+#  if defined(QT_OPENGL_ES_3)
+#   include <OpenGLES/ES3/gl.h>
+#   include <OpenGLES/ES3/glext.h>
+#  else
+#   include <OpenGLES/ES2/gl.h>
+#   include <OpenGLES/ES2/glext.h>
+#  endif
 
 /*
    OES_EGL_image_external is not included in the Apple provided
@@ -79,7 +76,28 @@
 typedef void* GLeglImageOES;
 
 # else // "uncontrolled" ES2 platforms
-#  include <GLES2/gl2.h>
+
+// In "es2" builds (QT_OPENGL_ES_2) additional defines indicate if ES
+// 3.0 or higher is available. In this case include the corresponding
+// header. These are backwards compatible and it should be safe to
+// include headers on top of each other, meaning that applications can
+// include gl2.h even if gl31.h gets included here.
+
+// This compile time differentation is important inside Qt because,
+// unlike desktop GL, GLES is different when it comes to versioning
+// and extensions: Standard functions that are new in a given version
+// are always available in a version-specific header and are not
+// guaranteed to be dynamically resolvable via eglGetProcAddress (and
+// are typically not available as extensions even if they were part of
+// an extension for a previous version).
+
+#  if defined(QT_OPENGL_ES_3_1)
+#   include <GLES3/gl31.h>
+#  elif defined(QT_OPENGL_ES_3)
+#   include <GLES3/gl3.h>
+#  else
+#   include <GLES2/gl2.h>
+#endif
 
 /*
    Some GLES2 implementations (like the one on Harmattan) are missing the
@@ -91,12 +109,6 @@ typedef char GLchar;
 
 #  include <QtGui/qopengles2ext.h>
 # endif // Q_OS_MAC
-# ifndef GL_DOUBLE
-#  define GL_DOUBLE GL_FLOAT
-# endif
-# ifndef GLdouble
-typedef GLfloat GLdouble;
-# endif
 #else // non-ES2 platforms
 # if defined(Q_OS_MAC)
 #  include <OpenGL/gl.h>
@@ -239,7 +251,7 @@ struct _cl_event;
 #endif
 
 #ifndef GL_ARB_debug_output
-typedef void (APIENTRY *GLDEBUGPROCARB)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
+typedef void (APIENTRY *GLDEBUGPROCARB)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,const GLvoid *userParam);
 #endif
 
 #ifndef GL_AMD_debug_output
@@ -247,7 +259,7 @@ typedef void (APIENTRY *GLDEBUGPROCAMD)(GLuint id,GLenum category,GLenum severit
 #endif
 
 #ifndef GL_KHR_debug
-typedef void (APIENTRY *GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
+typedef void (APIENTRY *GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,const GLvoid *userParam);
 #endif
 
 #ifndef GL_NV_vdpau_interop
diff --git a/src/gui/opengl/qopengl2pexvertexarray.cpp b/src/gui/opengl/qopengl2pexvertexarray.cpp
index 6055318bed..da25e0512e 100644
--- a/src/gui/opengl/qopengl2pexvertexarray.cpp
+++ b/src/gui/opengl/qopengl2pexvertexarray.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengl2pexvertexarray_p.h b/src/gui/opengl/qopengl2pexvertexarray_p.h
index 03a3ba5d24..667408a819 100644
--- a/src/gui/opengl/qopengl2pexvertexarray_p.h
+++ b/src/gui/opengl/qopengl2pexvertexarray_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengl_p.h b/src/gui/opengl/qopengl_p.h
index 5926fc8fba..0a3da9489a 100644
--- a/src/gui/opengl/qopengl_p.h
+++ b/src/gui/opengl/qopengl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglbuffer.cpp b/src/gui/opengl/qopenglbuffer.cpp
index a8a2255104..c8e3782274 100644
--- a/src/gui/opengl/qopenglbuffer.cpp
+++ b/src/gui/opengl/qopenglbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -128,6 +120,18 @@ QT_BEGIN_NAMESPACE
     \value ReadWrite The buffer will be mapped for reading and writing.
 */
 
+/*!
+    \enum QOpenGLBuffer::RangeAccessFlag
+    This enum defines the access mode bits for QOpenGLBuffer::mapRange().
+
+    \value RangeRead The buffer will be mapped for reading.
+    \value RangeWrite The buffer will be mapped for writing.
+    \value RangeInvalidate Discard the previous contents of the specified range.
+    \value RangeInvalidateBuffer Discard the previous contents of the entire buffer.
+    \value RangeFlushExplicit Indicates that modifications are to be flushed explicitly via \c glFlushMappedBufferRange.
+    \value RangeUnsynchronized Indicates that pending operations should not be synchronized before returning from mapRange().
+*/
+
 class QOpenGLBufferPrivate
 {
 public:
@@ -514,10 +518,14 @@ int QOpenGLBuffer::size() const
     It is assumed that create() has been called on this buffer and that
     it has been bound to the current context.
 
-    This function is only supported under OpenGL/ES if the
-    \c{GL_OES_mapbuffer} extension is present.
+    \note This function is only supported under OpenGL ES 2.0 or
+    earlier if the \c GL_OES_mapbuffer extension is present.
 
-    \sa unmap(), create(), bind()
+    \note On OpenGL ES 3.0 and newer, or, in case if desktop OpenGL,
+    if \c GL_ARB_map_buffer_range is supported, this function uses
+    \c glMapBufferRange instead of \c glMapBuffer.
+
+    \sa unmap(), create(), bind(), mapRange()
 */
 void *QOpenGLBuffer::map(QOpenGLBuffer::Access access)
 {
@@ -528,7 +536,48 @@ void *QOpenGLBuffer::map(QOpenGLBuffer::Access access)
 #endif
     if (!d->guard || !d->guard->id())
         return 0;
-    return d->funcs->glMapBuffer(d->type, access);
+    if (d->funcs->hasOpenGLExtension(QOpenGLExtensions::MapBufferRange)) {
+        QOpenGLBuffer::RangeAccessFlags rangeAccess = 0;
+        switch (access) {
+        case QOpenGLBuffer::ReadOnly:
+            rangeAccess = QOpenGLBuffer::RangeRead;
+            break;
+        case QOpenGLBuffer::WriteOnly:
+            rangeAccess = QOpenGLBuffer::RangeWrite;
+            break;
+        case QOpenGLBuffer::ReadWrite:
+            rangeAccess = QOpenGLBuffer::RangeRead | QOpenGLBuffer::RangeWrite;
+            break;
+        }
+        return d->funcs->glMapBufferRange(d->type, 0, size(), rangeAccess);
+    } else {
+        return d->funcs->glMapBuffer(d->type, access);
+    }
+}
+
+/*!
+    Maps the range specified by \a offset and \a count of the contents
+    of this buffer into the application's memory space and returns a
+    pointer to it.  Returns null if memory mapping is not possible.
+    The \a access parameter specifies a combination of access flags.
+
+    It is assumed that create() has been called on this buffer and that
+    it has been bound to the current context.
+
+    \note This function is not available on OpenGL ES 2.0 and earlier.
+
+    \sa unmap(), create(), bind()
+ */
+void *QOpenGLBuffer::mapRange(int offset, int count, QOpenGLBuffer::RangeAccessFlags access)
+{
+    Q_D(QOpenGLBuffer);
+#ifndef QT_NO_DEBUG
+    if (!isCreated())
+        qWarning("QOpenGLBuffer::mapRange(): buffer not created");
+#endif
+    if (!d->guard || !d->guard->id())
+        return 0;
+    return d->funcs->glMapBufferRange(d->type, offset, count, access);
 }
 
 /*!
@@ -539,8 +588,8 @@ void *QOpenGLBuffer::map(QOpenGLBuffer::Access access)
     It is assumed that this buffer has been bound to the current context,
     and that it was previously mapped with map().
 
-    This function is only supported under OpenGL/ES if the
-    \c{GL_OES_mapbuffer} extension is present.
+    \note This function is only supported under OpenGL ES 2.0 and
+    earlier if the \c{GL_OES_mapbuffer} extension is present.
 
     \sa map()
 */
diff --git a/src/gui/opengl/qopenglbuffer.h b/src/gui/opengl/qopenglbuffer.h
index ab564e9001..ce2aff387c 100644
--- a/src/gui/opengl/qopenglbuffer.h
+++ b/src/gui/opengl/qopenglbuffer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -92,6 +84,17 @@ public:
         ReadWrite           = 0x88BA  // GL_READ_WRITE
     };
 
+    enum RangeAccessFlag
+    {
+        RangeRead             = 0x0001, // GL_MAP_READ_BIT
+        RangeWrite            = 0x0002, // GL_MAP_WRITE_BIT
+        RangeInvalidate       = 0x0004, // GL_MAP_INVALIDATE_RANGE_BIT
+        RangeInvalidateBuffer = 0x0008, // GL_MAP_INVALIDATE_BUFFER_BIT
+        RangeFlushExplicit    = 0x0010, // GL_MAP_FLUSH_EXPLICIT_BIT
+        RangeUnsynchronized   = 0x0020  // GL_MAP_UNSYNCHRONIZED_BIT
+    };
+    Q_DECLARE_FLAGS(RangeAccessFlags, RangeAccessFlag)
+
     QOpenGLBuffer::Type type() const;
 
     QOpenGLBuffer::UsagePattern usagePattern() const;
@@ -118,6 +121,7 @@ public:
     inline void allocate(int count) { allocate(0, count); }
 
     void *map(QOpenGLBuffer::Access access);
+    void *mapRange(int offset, int count, QOpenGLBuffer::RangeAccessFlags access);
     bool unmap();
 
 private:
@@ -126,6 +130,8 @@ private:
     Q_DECLARE_PRIVATE(QOpenGLBuffer)
 };
 
+Q_DECLARE_OPERATORS_FOR_FLAGS(QOpenGLBuffer::RangeAccessFlags)
+
 QT_END_NAMESPACE
 
 #endif // QT_NO_OPENGL
diff --git a/src/gui/opengl/qopenglcustomshaderstage.cpp b/src/gui/opengl/qopenglcustomshaderstage.cpp
index 947081f26a..75a0389087 100644
--- a/src/gui/opengl/qopenglcustomshaderstage.cpp
+++ b/src/gui/opengl/qopenglcustomshaderstage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglcustomshaderstage_p.h b/src/gui/opengl/qopenglcustomshaderstage_p.h
index bb671b0d3b..daef2c627c 100644
--- a/src/gui/opengl/qopenglcustomshaderstage_p.h
+++ b/src/gui/opengl/qopenglcustomshaderstage_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengldebug.cpp b/src/gui/opengl/qopengldebug.cpp
index 79b59a8e98..88f00128da 100644
--- a/src/gui/opengl/qopengldebug.cpp
+++ b/src/gui/opengl/qopengldebug.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -115,7 +107,7 @@ QT_BEGIN_NAMESPACE
     QOpenGLDebugLogger supports both these modes of operation. Refer to the
     following sections to find out the differences between them.
 
-    \section1 Creating an OpenGL debug context
+    \section1 Creating an OpenGL Debug Context
 
     For efficiency reasons, OpenGL implementations are allowed not to create
     any debug output at all, unless the OpenGL context is a debug context. In order
@@ -142,7 +134,7 @@ QT_BEGIN_NAMESPACE
     version, as it relies on the availability of the \c{GL_KHR_debug} extension
     (see below).
 
-    \section1 Creating and initializing a QOpenGLDebugLogger
+    \section1 Creating and Initializing a QOpenGLDebugLogger
 
     QOpenGLDebugLogger is a simple QObject-derived class. Just like all QObject
     subclasses, you create an instance (and optionally specify a parent
@@ -171,7 +163,7 @@ QT_BEGIN_NAMESPACE
     where \c{ctx} is a valid QOpenGLContext. If the extension is not available,
     initialize() will return false.
 
-    \section1 Reading the internal OpenGL debug log
+    \section1 Reading the Internal OpenGL Debug Log
 
     OpenGL implementations keep an internal log of debug messages. Messages
     stored in this log can be retrieved by using the loggedMessages() function:
@@ -245,7 +237,7 @@ QT_BEGIN_NAMESPACE
     OpenGL log), it is important to always check if it contains any message
     after calling startLogging().
 
-    \section1 Inserting messages in the debug log
+    \section1 Inserting Messages in the Debug Log
 
     It is possible for applications and libraries to insert custom messages in
     the debug log, for instance for marking a group of related OpenGL commands
@@ -270,7 +262,7 @@ QT_BEGIN_NAMESPACE
     this length by calling the maximumMessageLength() method; messages longer
     than the limit will automatically get truncated.
 
-    \section1 Controlling the debug output
+    \section1 Controlling the Debug Output
 
     QOpenGLDebugMessage is also able to apply filters to the debug messages, and
     therefore limit the amount of messages logged. You can enable or disable
@@ -460,6 +452,17 @@ QT_BEGIN_NAMESPACE
         connecting to the messageLogged() signal.
 */
 
+// When using OpenGL ES 2.0, all the necessary GL_KHR_debug constants are
+// provided in qopengles2ext.h. Unfortunately, newer versions of that file
+// suffix everything with _KHR which causes extra headache when the goal is
+// to have a single piece of code that builds in all our target
+// environments. Therefore, try to detect this and use our custom defines
+// instead, which we anyway need for OS X.
+
+#if defined(GL_KHR_debug) && defined(GL_DEBUG_SOURCE_API_KHR)
+#define USE_MANUAL_DEFS
+#endif
+
 // Under OSX (at least up to 10.8) we cannot include our copy of glext.h,
 // but we use the system-wide one, which unfortunately lacks all the needed
 // defines/typedefs. In order to make the code compile, we just add here
@@ -467,6 +470,10 @@ QT_BEGIN_NAMESPACE
 
 #ifndef GL_KHR_debug
 #define GL_KHR_debug 1
+#define USE_MANUAL_DEFS
+#endif
+
+#ifdef USE_MANUAL_DEFS
 
 #ifndef GL_DEBUG_OUTPUT_SYNCHRONOUS
 #define GL_DEBUG_OUTPUT_SYNCHRONOUS       0x8242
@@ -589,9 +596,9 @@ QT_BEGIN_NAMESPACE
 #define GL_STACK_UNDERFLOW                0x0504
 #endif
 
-typedef void (QOPENGLF_APIENTRY *GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
+typedef void (QOPENGLF_APIENTRY *GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,const GLvoid *userParam);
 
-#endif /* GL_KHR_debug */
+#endif /* USE_MANUAL_DEFS */
 
 
 /*!
@@ -1276,9 +1283,9 @@ static void QOPENGLF_APIENTRY qt_opengl_debug_callback(GLenum source,
                                                        GLenum severity,
                                                        GLsizei length,
                                                        const GLchar *rawMessage,
-                                                       GLvoid *userParam)
+                                                       const GLvoid *userParam)
 {
-    QOpenGLDebugLoggerPrivate *loggerPrivate = static_cast<QOpenGLDebugLoggerPrivate *>(userParam);
+    QOpenGLDebugLoggerPrivate *loggerPrivate = static_cast<QOpenGLDebugLoggerPrivate *>(const_cast<GLvoid *>(userParam));
     loggerPrivate->handleMessage(source, type, id, severity, length, rawMessage);
 }
 }
diff --git a/src/gui/opengl/qopengldebug.h b/src/gui/opengl/qopengldebug.h
index 5f0c1a52db..d0a4729d1f 100644
--- a/src/gui/opengl/qopengldebug.h
+++ b/src/gui/opengl/qopengldebug.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglengineshadermanager.cpp b/src/gui/opengl/qopenglengineshadermanager.cpp
index 1c4231b79f..5bdb2f35ac 100644
--- a/src/gui/opengl/qopenglengineshadermanager.cpp
+++ b/src/gui/opengl/qopenglengineshadermanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglengineshadermanager_p.h b/src/gui/opengl/qopenglengineshadermanager_p.h
index 893574a6e5..2ae0ae0866 100644
--- a/src/gui/opengl/qopenglengineshadermanager_p.h
+++ b/src/gui/opengl/qopenglengineshadermanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglengineshadersource_p.h b/src/gui/opengl/qopenglengineshadersource_p.h
index 02a23193a8..bc81fe4c77 100644
--- a/src/gui/opengl/qopenglengineshadersource_p.h
+++ b/src/gui/opengl/qopenglengineshadersource_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengles2ext.h b/src/gui/opengl/qopengles2ext.h
index 5926d5bbd5..60c788abbe 100644
--- a/src/gui/opengl/qopengles2ext.h
+++ b/src/gui/opengl/qopengles2ext.h
@@ -1,5 +1,5 @@
 #ifndef __gl2ext_h_
-#define __gl2ext_h_
+#define __gl2ext_h_ 1
 
 #if 0
 #pragma qt_no_master_include
@@ -7,390 +7,10 @@
 #pragma qt_sync_stop_processing
 #endif
 
-/* $Revision: 20771 $ on $Date:: 2013-03-05 18:53:24 -0800 #$ */
-
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-/*
- * This document is licensed under the SGI Free Software B License Version
- * 2.0. For details, see http://oss.sgi.com/projects/FreeB/ .
- */
-
-#ifndef GL_APIENTRYP
-#   define GL_APIENTRYP GL_APIENTRY*
-#endif
-
-/*------------------------------------------------------------------------*
- * OES extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_OES_compressed_ETC1_RGB8_texture */
-#ifndef GL_OES_compressed_ETC1_RGB8_texture
-#define GL_ETC1_RGB8_OES                                        0x8D64
-#endif
-
-/* GL_OES_compressed_paletted_texture */
-#ifndef GL_OES_compressed_paletted_texture
-#define GL_PALETTE4_RGB8_OES                                    0x8B90
-#define GL_PALETTE4_RGBA8_OES                                   0x8B91
-#define GL_PALETTE4_R5_G6_B5_OES                                0x8B92
-#define GL_PALETTE4_RGBA4_OES                                   0x8B93
-#define GL_PALETTE4_RGB5_A1_OES                                 0x8B94
-#define GL_PALETTE8_RGB8_OES                                    0x8B95
-#define GL_PALETTE8_RGBA8_OES                                   0x8B96
-#define GL_PALETTE8_R5_G6_B5_OES                                0x8B97
-#define GL_PALETTE8_RGBA4_OES                                   0x8B98
-#define GL_PALETTE8_RGB5_A1_OES                                 0x8B99
-#endif
-
-/* GL_OES_depth24 */
-#ifndef GL_OES_depth24
-#define GL_DEPTH_COMPONENT24_OES                                0x81A6
-#endif
-
-/* GL_OES_depth32 */
-#ifndef GL_OES_depth32
-#define GL_DEPTH_COMPONENT32_OES                                0x81A7
-#endif
-
-/* GL_OES_depth_texture */
-/* No new tokens introduced by this extension. */
-
-/* GL_OES_EGL_image */
-#ifndef GL_OES_EGL_image
-typedef void* GLeglImageOES;
-#endif
-
-/* GL_OES_EGL_image_external */
-#ifndef GL_OES_EGL_image_external
-/* GLeglImageOES defined in GL_OES_EGL_image already. */
-#define GL_TEXTURE_EXTERNAL_OES                                 0x8D65
-#define GL_SAMPLER_EXTERNAL_OES                                 0x8D66
-#define GL_TEXTURE_BINDING_EXTERNAL_OES                         0x8D67
-#define GL_REQUIRED_TEXTURE_IMAGE_UNITS_OES                     0x8D68
-#endif
-
-/* GL_OES_element_index_uint */
-#ifndef GL_OES_element_index_uint
-#define GL_UNSIGNED_INT                                         0x1405
-#endif
-
-/* GL_OES_get_program_binary */
-#ifndef GL_OES_get_program_binary
-#define GL_PROGRAM_BINARY_LENGTH_OES                            0x8741
-#define GL_NUM_PROGRAM_BINARY_FORMATS_OES                       0x87FE
-#define GL_PROGRAM_BINARY_FORMATS_OES                           0x87FF
-#endif
-
-/* GL_OES_mapbuffer */
-#ifndef GL_OES_mapbuffer
-#define GL_WRITE_ONLY_OES                                       0x88B9
-#define GL_BUFFER_ACCESS_OES                                    0x88BB
-#define GL_BUFFER_MAPPED_OES                                    0x88BC
-#define GL_BUFFER_MAP_POINTER_OES                               0x88BD
-#endif
-
-/* GL_OES_packed_depth_stencil */
-#ifndef GL_OES_packed_depth_stencil
-#define GL_DEPTH_STENCIL_OES                                    0x84F9
-#define GL_UNSIGNED_INT_24_8_OES                                0x84FA
-#define GL_DEPTH24_STENCIL8_OES                                 0x88F0
-#endif
-
-/* GL_OES_required_internalformat */
-#ifndef GL_OES_required_internalformat
-#define GL_ALPHA8_OES                                           0x803C
-#define GL_DEPTH_COMPONENT16_OES                                0x81A5
-/* reuse GL_DEPTH_COMPONENT24_OES */
-/* reuse GL_DEPTH24_STENCIL8_OES */
-/* reuse GL_DEPTH_COMPONENT32_OES */
-#define GL_LUMINANCE4_ALPHA4_OES                                0x8043
-#define GL_LUMINANCE8_ALPHA8_OES                                0x8045
-#define GL_LUMINANCE8_OES                                       0x8040
-#define GL_RGBA4_OES                                            0x8056
-#define GL_RGB5_A1_OES                                          0x8057
-#define GL_RGB565_OES                                           0x8D62
-/* reuse GL_RGB8_OES */
-/* reuse GL_RGBA8_OES */
-/* reuse GL_RGB10_EXT */
-/* reuse GL_RGB10_A2_EXT */
-#endif
-
-/* GL_OES_rgb8_rgba8 */
-#ifndef GL_OES_rgb8_rgba8
-#define GL_RGB8_OES                                             0x8051
-#define GL_RGBA8_OES                                            0x8058
-#endif
-
-/* GL_OES_standard_derivatives */
-#ifndef GL_OES_standard_derivatives
-#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT_OES                  0x8B8B
-#endif
-
-/* GL_OES_stencil1 */
-#ifndef GL_OES_stencil1
-#define GL_STENCIL_INDEX1_OES                                   0x8D46
-#endif
-
-/* GL_OES_stencil4 */
-#ifndef GL_OES_stencil4
-#define GL_STENCIL_INDEX4_OES                                   0x8D47
-#endif
-
-#ifndef GL_OES_surfaceless_context
-#define GL_FRAMEBUFFER_UNDEFINED_OES                            0x8219
-#endif
-
-/* GL_OES_texture_3D */
-#ifndef GL_OES_texture_3D
-#define GL_TEXTURE_WRAP_R_OES                                   0x8072
-#define GL_TEXTURE_3D_OES                                       0x806F
-#define GL_TEXTURE_BINDING_3D_OES                               0x806A
-#define GL_MAX_3D_TEXTURE_SIZE_OES                              0x8073
-#define GL_SAMPLER_3D_OES                                       0x8B5F
-#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_OES        0x8CD4
-#endif
-
-/* GL_OES_texture_float */
-/* No new tokens introduced by this extension. */
-
-/* GL_OES_texture_float_linear */
-/* No new tokens introduced by this extension. */
-
-/* GL_OES_texture_half_float */
-#ifndef GL_OES_texture_half_float
-#define GL_HALF_FLOAT_OES                                       0x8D61
-#endif
-
-/* GL_OES_texture_half_float_linear */
-/* No new tokens introduced by this extension. */
-
-/* GL_OES_texture_npot */
-/* No new tokens introduced by this extension. */
-
-/* GL_OES_vertex_array_object */
-#ifndef GL_OES_vertex_array_object
-#define GL_VERTEX_ARRAY_BINDING_OES                             0x85B5
-#endif
-
-/* GL_OES_vertex_half_float */
-/* GL_HALF_FLOAT_OES defined in GL_OES_texture_half_float already. */
-
-/* GL_OES_vertex_type_10_10_10_2 */
-#ifndef GL_OES_vertex_type_10_10_10_2
-#define GL_UNSIGNED_INT_10_10_10_2_OES                          0x8DF6
-#define GL_INT_10_10_10_2_OES                                   0x8DF7
-#endif
-
-/*------------------------------------------------------------------------*
- * KHR extension tokens
- *------------------------------------------------------------------------*/
-
-#ifndef GL_KHR_debug
-typedef void (GL_APIENTRYP GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
-#define GL_DEBUG_OUTPUT_SYNCHRONOUS                             0x8242
-#define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH                     0x8243
-#define GL_DEBUG_CALLBACK_FUNCTION                              0x8244
-#define GL_DEBUG_CALLBACK_USER_PARAM                            0x8245
-#define GL_DEBUG_SOURCE_API                                     0x8246
-#define GL_DEBUG_SOURCE_WINDOW_SYSTEM                           0x8247
-#define GL_DEBUG_SOURCE_SHADER_COMPILER                         0x8248
-#define GL_DEBUG_SOURCE_THIRD_PARTY                             0x8249
-#define GL_DEBUG_SOURCE_APPLICATION                             0x824A
-#define GL_DEBUG_SOURCE_OTHER                                   0x824B
-#define GL_DEBUG_TYPE_ERROR                                     0x824C
-#define GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR                       0x824D
-#define GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR                        0x824E
-#define GL_DEBUG_TYPE_PORTABILITY                               0x824F
-#define GL_DEBUG_TYPE_PERFORMANCE                               0x8250
-#define GL_DEBUG_TYPE_OTHER                                     0x8251
-#define GL_DEBUG_TYPE_MARKER                                    0x8268
-#define GL_DEBUG_TYPE_PUSH_GROUP                                0x8269
-#define GL_DEBUG_TYPE_POP_GROUP                                 0x826A
-#define GL_DEBUG_SEVERITY_NOTIFICATION                          0x826B
-#define GL_MAX_DEBUG_GROUP_STACK_DEPTH                          0x826C
-#define GL_DEBUG_GROUP_STACK_DEPTH                              0x826D
-#define GL_BUFFER                                               0x82E0
-#define GL_SHADER                                               0x82E1
-#define GL_PROGRAM                                              0x82E2
-#define GL_QUERY                                                0x82E3
-/* PROGRAM_PIPELINE only in GL */
-#define GL_SAMPLER                                              0x82E6
-/* DISPLAY_LIST only in GL */
-#define GL_MAX_LABEL_LENGTH                                     0x82E8
-#define GL_MAX_DEBUG_MESSAGE_LENGTH                             0x9143
-#define GL_MAX_DEBUG_LOGGED_MESSAGES                            0x9144
-#define GL_DEBUG_LOGGED_MESSAGES                                0x9145
-#define GL_DEBUG_SEVERITY_HIGH                                  0x9146
-#define GL_DEBUG_SEVERITY_MEDIUM                                0x9147
-#define GL_DEBUG_SEVERITY_LOW                                   0x9148
-#define GL_DEBUG_OUTPUT                                         0x92E0
-#define GL_CONTEXT_FLAG_DEBUG_BIT                               0x00000002
-#define GL_STACK_OVERFLOW                                       0x0503
-#define GL_STACK_UNDERFLOW                                      0x0504
-#endif
-
-#ifndef GL_KHR_texture_compression_astc_ldr
-#define GL_COMPRESSED_RGBA_ASTC_4x4_KHR                         0x93B0
-#define GL_COMPRESSED_RGBA_ASTC_5x4_KHR                         0x93B1
-#define GL_COMPRESSED_RGBA_ASTC_5x5_KHR                         0x93B2
-#define GL_COMPRESSED_RGBA_ASTC_6x5_KHR                         0x93B3
-#define GL_COMPRESSED_RGBA_ASTC_6x6_KHR                         0x93B4
-#define GL_COMPRESSED_RGBA_ASTC_8x5_KHR                         0x93B5
-#define GL_COMPRESSED_RGBA_ASTC_8x6_KHR                         0x93B6
-#define GL_COMPRESSED_RGBA_ASTC_8x8_KHR                         0x93B7
-#define GL_COMPRESSED_RGBA_ASTC_10x5_KHR                        0x93B8
-#define GL_COMPRESSED_RGBA_ASTC_10x6_KHR                        0x93B9
-#define GL_COMPRESSED_RGBA_ASTC_10x8_KHR                        0x93BA
-#define GL_COMPRESSED_RGBA_ASTC_10x10_KHR                       0x93BB
-#define GL_COMPRESSED_RGBA_ASTC_12x10_KHR                       0x93BC
-#define GL_COMPRESSED_RGBA_ASTC_12x12_KHR                       0x93BD
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4_KHR                 0x93D0
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x4_KHR                 0x93D1
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5_KHR                 0x93D2
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x5_KHR                 0x93D3
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6_KHR                 0x93D4
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x5_KHR                 0x93D5
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x6_KHR                 0x93D6
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x8_KHR                 0x93D7
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x5_KHR                0x93D8
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x6_KHR                0x93D9
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x8_KHR                0x93DA
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x10_KHR               0x93DB
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x10_KHR               0x93DC
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x12_KHR               0x93DD
-#endif
-
-/*------------------------------------------------------------------------*
- * AMD extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_AMD_compressed_3DC_texture */
-#ifndef GL_AMD_compressed_3DC_texture
-#define GL_3DC_X_AMD                                            0x87F9
-#define GL_3DC_XY_AMD                                           0x87FA
-#endif
-
-/* GL_AMD_compressed_ATC_texture */
-#ifndef GL_AMD_compressed_ATC_texture
-#define GL_ATC_RGB_AMD                                          0x8C92
-#define GL_ATC_RGBA_EXPLICIT_ALPHA_AMD                          0x8C93
-#define GL_ATC_RGBA_INTERPOLATED_ALPHA_AMD                      0x87EE
-#endif
-
-/* GL_AMD_performance_monitor */
-#ifndef GL_AMD_performance_monitor
-#define GL_COUNTER_TYPE_AMD                                     0x8BC0
-#define GL_COUNTER_RANGE_AMD                                    0x8BC1
-#define GL_UNSIGNED_INT64_AMD                                   0x8BC2
-#define GL_PERCENTAGE_AMD                                       0x8BC3
-#define GL_PERFMON_RESULT_AVAILABLE_AMD                         0x8BC4
-#define GL_PERFMON_RESULT_SIZE_AMD                              0x8BC5
-#define GL_PERFMON_RESULT_AMD                                   0x8BC6
-#endif
-
-/* GL_AMD_program_binary_Z400 */
-#ifndef GL_AMD_program_binary_Z400
-#define GL_Z400_BINARY_AMD                                      0x8740
-#endif
-
-/*------------------------------------------------------------------------*
- * ANGLE extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_ANGLE_depth_texture */
-#ifndef GL_ANGLE_depth_texture
-#define GL_DEPTH_COMPONENT                                      0x1902
-#define GL_DEPTH_STENCIL_OES                                    0x84F9
-#define GL_UNSIGNED_SHORT                                       0x1403
-#define GL_UNSIGNED_INT                                         0x1405
-#define GL_UNSIGNED_INT_24_8_OES                                0x84FA
-#define GL_DEPTH_COMPONENT16                                    0x81A5
-#define GL_DEPTH_COMPONENT32_OES                                0x81A7
-#define GL_DEPTH24_STENCIL8_OES                                 0x88F0
-#endif
-
-/* GL_ANGLE_framebuffer_blit */
-#ifndef GL_ANGLE_framebuffer_blit
-#define GL_READ_FRAMEBUFFER_ANGLE                               0x8CA8
-#define GL_DRAW_FRAMEBUFFER_ANGLE                               0x8CA9
-#define GL_DRAW_FRAMEBUFFER_BINDING_ANGLE                       0x8CA6
-#define GL_READ_FRAMEBUFFER_BINDING_ANGLE                       0x8CAA
-#endif
-
-/* GL_ANGLE_framebuffer_multisample */
-#ifndef GL_ANGLE_framebuffer_multisample
-#define GL_RENDERBUFFER_SAMPLES_ANGLE                           0x8CAB
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_ANGLE             0x8D56
-#define GL_MAX_SAMPLES_ANGLE                                    0x8D57
-#endif
-
-/* GL_ANGLE_instanced_arrays */
-#ifndef GL_ANGLE_instanced_arrays
-#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE                    0x88FE
-#endif
-
-/* GL_ANGLE_pack_reverse_row_order */
-#ifndef GL_ANGLE_pack_reverse_row_order
-#define GL_PACK_REVERSE_ROW_ORDER_ANGLE                         0x93A4
-#endif
-
-/* GL_ANGLE_program_binary */
-#ifndef GL_ANGLE_program_binary
-#define GL_PROGRAM_BINARY_ANGLE                                 0x93A6
-#endif
-
-/* GL_ANGLE_texture_compression_dxt3 */
-#ifndef GL_ANGLE_texture_compression_dxt3
-#define GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE                      0x83F2
-#endif
-
-/* GL_ANGLE_texture_compression_dxt5 */
-#ifndef GL_ANGLE_texture_compression_dxt5
-#define GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE                      0x83F3
-#endif
-
-/* GL_ANGLE_texture_usage */
-#ifndef GL_ANGLE_texture_usage
-#define GL_TEXTURE_USAGE_ANGLE                                  0x93A2
-#define GL_FRAMEBUFFER_ATTACHMENT_ANGLE                         0x93A3
-#endif
-
-/* GL_ANGLE_translated_shader_source */
-#ifndef GL_ANGLE_translated_shader_source
-#define GL_TRANSLATED_SHADER_SOURCE_LENGTH_ANGLE                0x93A0
-#endif
-
-/*------------------------------------------------------------------------*
- * APPLE extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_APPLE_copy_texture_levels */
-/* No new tokens introduced by this extension. */
-
-/* GL_APPLE_framebuffer_multisample */
-#ifndef GL_APPLE_framebuffer_multisample
-#define GL_RENDERBUFFER_SAMPLES_APPLE                           0x8CAB
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_APPLE             0x8D56
-#define GL_MAX_SAMPLES_APPLE                                    0x8D57
-#define GL_READ_FRAMEBUFFER_APPLE                               0x8CA8
-#define GL_DRAW_FRAMEBUFFER_APPLE                               0x8CA9
-#define GL_DRAW_FRAMEBUFFER_BINDING_APPLE                       0x8CA6
-#define GL_READ_FRAMEBUFFER_BINDING_APPLE                       0x8CAA
-#endif
-
-/* GL_APPLE_rgb_422 */
-#ifndef GL_APPLE_rgb_422
-#define GL_RGB_422_APPLE                                        0x8A1F
-#define GL_UNSIGNED_SHORT_8_8_APPLE                             0x85BA
-#define GL_UNSIGNED_SHORT_8_8_REV_APPLE                         0x85BB
-#endif
-
-/* GL_APPLE_sync */
-#ifndef GL_APPLE_sync
-
 #ifndef __gl3_h_
 /* These types are defined with reference to <inttypes.h>
  * in the Apple extension spec, but here we use the Khronos
@@ -404,935 +24,692 @@ typedef khronos_uint64_t GLuint64;
 typedef struct __GLsync *GLsync;
 #endif
 
-#define GL_SYNC_OBJECT_APPLE                                    0x8A53
-#define GL_MAX_SERVER_WAIT_TIMEOUT_APPLE                        0x9111
-#define GL_OBJECT_TYPE_APPLE                                    0x9112
-#define GL_SYNC_CONDITION_APPLE                                 0x9113
-#define GL_SYNC_STATUS_APPLE                                    0x9114
-#define GL_SYNC_FLAGS_APPLE                                     0x9115
-#define GL_SYNC_FENCE_APPLE                                     0x9116
-#define GL_SYNC_GPU_COMMANDS_COMPLETE_APPLE                     0x9117
-#define GL_UNSIGNALED_APPLE                                     0x9118
-#define GL_SIGNALED_APPLE                                       0x9119
-#define GL_ALREADY_SIGNALED_APPLE                               0x911A
-#define GL_TIMEOUT_EXPIRED_APPLE                                0x911B
-#define GL_CONDITION_SATISFIED_APPLE                            0x911C
-#define GL_WAIT_FAILED_APPLE                                    0x911D
-#define GL_SYNC_FLUSH_COMMANDS_BIT_APPLE                        0x00000001
-#define GL_TIMEOUT_IGNORED_APPLE                                0xFFFFFFFFFFFFFFFFull
-#endif
-
-/* GL_APPLE_texture_format_BGRA8888 */
-#ifndef GL_APPLE_texture_format_BGRA8888
-#define GL_BGRA_EXT                                             0x80E1
-#endif
-
-/* GL_APPLE_texture_max_level */
-#ifndef GL_APPLE_texture_max_level
-#define GL_TEXTURE_MAX_LEVEL_APPLE                              0x813D
-#endif
-
-/*------------------------------------------------------------------------*
- * ARM extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_ARM_mali_program_binary */
-#ifndef GL_ARM_mali_program_binary
-#define GL_MALI_PROGRAM_BINARY_ARM                              0x8F61
-#endif
-
-/* GL_ARM_mali_shader_binary */
-#ifndef GL_ARM_mali_shader_binary
-#define GL_MALI_SHADER_BINARY_ARM                               0x8F60
-#endif
-
-/* GL_ARM_rgba8 */
-/* No new tokens introduced by this extension. */
-
-/*------------------------------------------------------------------------*
- * EXT extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_EXT_blend_minmax */
-#ifndef GL_EXT_blend_minmax
-#define GL_MIN_EXT                                              0x8007
-#define GL_MAX_EXT                                              0x8008
-#endif
-
-/* GL_EXT_color_buffer_half_float */
-#ifndef GL_EXT_color_buffer_half_float
-#define GL_RGBA16F_EXT                                          0x881A
-#define GL_RGB16F_EXT                                           0x881B
-#define GL_RG16F_EXT                                            0x822F
-#define GL_R16F_EXT                                             0x822D
-#define GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE_EXT            0x8211
-#define GL_UNSIGNED_NORMALIZED_EXT                              0x8C17
-#endif
-
-/* GL_EXT_debug_label */
-#ifndef GL_EXT_debug_label
-#define GL_PROGRAM_PIPELINE_OBJECT_EXT                          0x8A4F
-#define GL_PROGRAM_OBJECT_EXT                                   0x8B40
-#define GL_SHADER_OBJECT_EXT                                    0x8B48
-#define GL_BUFFER_OBJECT_EXT                                    0x9151
-#define GL_QUERY_OBJECT_EXT                                     0x9153
-#define GL_VERTEX_ARRAY_OBJECT_EXT                              0x9154
-#endif
-
-/* GL_EXT_debug_marker */
-/* No new tokens introduced by this extension. */
-
-/* GL_EXT_discard_framebuffer */
-#ifndef GL_EXT_discard_framebuffer
-#define GL_COLOR_EXT                                            0x1800
-#define GL_DEPTH_EXT                                            0x1801
-#define GL_STENCIL_EXT                                          0x1802
-#endif
-
-/* GL_EXT_map_buffer_range */
-#ifndef GL_EXT_map_buffer_range
-#define GL_MAP_READ_BIT_EXT                                     0x0001
-#define GL_MAP_WRITE_BIT_EXT                                    0x0002
-#define GL_MAP_INVALIDATE_RANGE_BIT_EXT                         0x0004
-#define GL_MAP_INVALIDATE_BUFFER_BIT_EXT                        0x0008
-#define GL_MAP_FLUSH_EXPLICIT_BIT_EXT                           0x0010
-#define GL_MAP_UNSYNCHRONIZED_BIT_EXT                           0x0020
-#endif
-
-/* GL_EXT_multisampled_render_to_texture */
-#ifndef GL_EXT_multisampled_render_to_texture
-#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_SAMPLES_EXT           0x8D6C
-/* reuse values from GL_EXT_framebuffer_multisample (desktop extension) */
-#define GL_RENDERBUFFER_SAMPLES_EXT                             0x8CAB
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT               0x8D56
-#define GL_MAX_SAMPLES_EXT                                      0x8D57
-#endif
-
-/* GL_EXT_multiview_draw_buffers */
-#ifndef GL_EXT_multiview_draw_buffers
-#define GL_COLOR_ATTACHMENT_EXT                                 0x90F0
-#define GL_MULTIVIEW_EXT                                        0x90F1
-#define GL_DRAW_BUFFER_EXT                                      0x0C01
-#define GL_READ_BUFFER_EXT                                      0x0C02
-#define GL_MAX_MULTIVIEW_BUFFERS_EXT                            0x90F2
-#endif
-
-/* GL_EXT_multi_draw_arrays */
-/* No new tokens introduced by this extension. */
-
-/* GL_EXT_occlusion_query_boolean */
-#ifndef GL_EXT_occlusion_query_boolean
-#define GL_ANY_SAMPLES_PASSED_EXT                               0x8C2F
-#define GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT                  0x8D6A
-#define GL_CURRENT_QUERY_EXT                                    0x8865
-#define GL_QUERY_RESULT_EXT                                     0x8866
-#define GL_QUERY_RESULT_AVAILABLE_EXT                           0x8867
-#endif
-
-/* GL_EXT_read_format_bgra */
-#ifndef GL_EXT_read_format_bgra
-#define GL_BGRA_EXT                                             0x80E1
-#define GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT                       0x8365
-#define GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT                       0x8366
-#endif
-
-/* GL_EXT_robustness */
-#ifndef GL_EXT_robustness
-/* reuse GL_NO_ERROR */
-#define GL_GUILTY_CONTEXT_RESET_EXT                             0x8253
-#define GL_INNOCENT_CONTEXT_RESET_EXT                           0x8254
-#define GL_UNKNOWN_CONTEXT_RESET_EXT                            0x8255
-#define GL_CONTEXT_ROBUST_ACCESS_EXT                            0x90F3
-#define GL_RESET_NOTIFICATION_STRATEGY_EXT                      0x8256
-#define GL_LOSE_CONTEXT_ON_RESET_EXT                            0x8252
-#define GL_NO_RESET_NOTIFICATION_EXT                            0x8261
-#endif
-
-/* GL_EXT_separate_shader_objects */
-#ifndef GL_EXT_separate_shader_objects
-#define GL_VERTEX_SHADER_BIT_EXT                                0x00000001
-#define GL_FRAGMENT_SHADER_BIT_EXT                              0x00000002
-#define GL_ALL_SHADER_BITS_EXT                                  0xFFFFFFFF
-#define GL_PROGRAM_SEPARABLE_EXT                                0x8258
-#define GL_ACTIVE_PROGRAM_EXT                                   0x8259
-#define GL_PROGRAM_PIPELINE_BINDING_EXT                         0x825A
-#endif
-
-/* GL_EXT_shader_framebuffer_fetch */
-#ifndef GL_EXT_shader_framebuffer_fetch
-#define GL_FRAGMENT_SHADER_DISCARDS_SAMPLES_EXT                 0x8A52
-#endif
-
-/* GL_EXT_shader_texture_lod */
-/* No new tokens introduced by this extension. */
-
-/* GL_EXT_shadow_samplers */
-#ifndef GL_EXT_shadow_samplers
-#define GL_TEXTURE_COMPARE_MODE_EXT                             0x884C
-#define GL_TEXTURE_COMPARE_FUNC_EXT                             0x884D
-#define GL_COMPARE_REF_TO_TEXTURE_EXT                           0x884E
-#define GL_SAMPLER_2D_SHADOW_EXT                                0x8B62
-#endif
-
-/* GL_EXT_sRGB */
-#ifndef GL_EXT_sRGB
-#define GL_SRGB_EXT                                             0x8C40
-#define GL_SRGB_ALPHA_EXT                                       0x8C42
-#define GL_SRGB8_ALPHA8_EXT                                     0x8C43
-#define GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING_EXT            0x8210
-#endif
-
-/* GL_EXT_texture_compression_dxt1 */
-#ifndef GL_EXT_texture_compression_dxt1
-#define GL_COMPRESSED_RGB_S3TC_DXT1_EXT                         0x83F0
-#define GL_COMPRESSED_RGBA_S3TC_DXT1_EXT                        0x83F1
-#endif
-
-/* GL_EXT_texture_filter_anisotropic */
-#ifndef GL_EXT_texture_filter_anisotropic
-#define GL_TEXTURE_MAX_ANISOTROPY_EXT                           0x84FE
-#define GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT                       0x84FF
-#endif
-
-/* GL_EXT_texture_format_BGRA8888 */
-#ifndef GL_EXT_texture_format_BGRA8888
-#define GL_BGRA_EXT                                             0x80E1
-#endif
-
-/* GL_EXT_texture_rg */
-#ifndef GL_EXT_texture_rg
-#define GL_RED_EXT                                              0x1903
-#define GL_RG_EXT                                               0x8227
-#define GL_R8_EXT                                               0x8229
-#define GL_RG8_EXT                                              0x822B
-#endif
-
-/* GL_EXT_texture_storage */
-#ifndef GL_EXT_texture_storage
-#define GL_TEXTURE_IMMUTABLE_FORMAT_EXT                         0x912F
-#define GL_ALPHA8_EXT                                           0x803C
-#define GL_LUMINANCE8_EXT                                       0x8040
-#define GL_LUMINANCE8_ALPHA8_EXT                                0x8045
-#define GL_RGBA32F_EXT                                          0x8814
-#define GL_RGB32F_EXT                                           0x8815
-#define GL_ALPHA32F_EXT                                         0x8816
-#define GL_LUMINANCE32F_EXT                                     0x8818
-#define GL_LUMINANCE_ALPHA32F_EXT                               0x8819
-/* reuse GL_RGBA16F_EXT */
-/* reuse GL_RGB16F_EXT */
-#define GL_ALPHA16F_EXT                                         0x881C
-#define GL_LUMINANCE16F_EXT                                     0x881E
-#define GL_LUMINANCE_ALPHA16F_EXT                               0x881F
-#define GL_RGB10_A2_EXT                                         0x8059
-#define GL_RGB10_EXT                                            0x8052
-#define GL_BGRA8_EXT                                            0x93A1
-#define GL_R8_EXT                                               0x8229
-#define GL_RG8_EXT                                              0x822B
-#define GL_R32F_EXT                                             0x822E
-#define GL_RG32F_EXT                                            0x8230
-#define GL_R16F_EXT                                             0x822D
-#define GL_RG16F_EXT                                            0x822F
-#endif
-
-/* GL_EXT_texture_type_2_10_10_10_REV */
-#ifndef GL_EXT_texture_type_2_10_10_10_REV
-#define GL_UNSIGNED_INT_2_10_10_10_REV_EXT                      0x8368
-#endif
-
-/* GL_EXT_unpack_subimage */
-#ifndef GL_EXT_unpack_subimage
-#define GL_UNPACK_ROW_LENGTH_EXT                                0x0CF2
-#define GL_UNPACK_SKIP_ROWS_EXT                                 0x0CF3
-#define GL_UNPACK_SKIP_PIXELS_EXT                               0x0CF4
-#endif
-
-/*------------------------------------------------------------------------*
- * DMP extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_DMP_shader_binary */
-#ifndef GL_DMP_shader_binary
-#define GL_SHADER_BINARY_DMP                                    0x9250
-#endif
-
-/*------------------------------------------------------------------------*
- * FJ extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_FJ_shader_binary_GCCSO */
-#ifndef GL_FJ_shader_binary_GCCSO
-#define GL_GCCSO_SHADER_BINARY_F                                0x9260
-#endif
-
-/*------------------------------------------------------------------------*
- * IMG extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_IMG_program_binary */
-#ifndef GL_IMG_program_binary
-#define GL_SGX_PROGRAM_BINARY_IMG                               0x9130
-#endif
-
-/* GL_IMG_read_format */
-#ifndef GL_IMG_read_format
-#define GL_BGRA_IMG                                             0x80E1
-#define GL_UNSIGNED_SHORT_4_4_4_4_REV_IMG                       0x8365
-#endif
-
-/* GL_IMG_shader_binary */
-#ifndef GL_IMG_shader_binary
-#define GL_SGX_BINARY_IMG                                       0x8C0A
-#endif
-
-/* GL_IMG_texture_compression_pvrtc */
-#ifndef GL_IMG_texture_compression_pvrtc
-#define GL_COMPRESSED_RGB_PVRTC_4BPPV1_IMG                      0x8C00
-#define GL_COMPRESSED_RGB_PVRTC_2BPPV1_IMG                      0x8C01
-#define GL_COMPRESSED_RGBA_PVRTC_4BPPV1_IMG                     0x8C02
-#define GL_COMPRESSED_RGBA_PVRTC_2BPPV1_IMG                     0x8C03
-#endif
-
-/* GL_IMG_texture_compression_pvrtc2 */
-#ifndef GL_IMG_texture_compression_pvrtc2
-#define GL_COMPRESSED_RGBA_PVRTC_2BPPV2_IMG                     0x9137
-#define GL_COMPRESSED_RGBA_PVRTC_4BPPV2_IMG                     0x9138
-#endif
-
-/* GL_IMG_multisampled_render_to_texture */
-#ifndef GL_IMG_multisampled_render_to_texture
-#define GL_RENDERBUFFER_SAMPLES_IMG                             0x9133
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_IMG               0x9134
-#define GL_MAX_SAMPLES_IMG                                      0x9135
-#define GL_TEXTURE_SAMPLES_IMG                                  0x9136
-#endif
-
-/*------------------------------------------------------------------------*
- * NV extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_NV_coverage_sample */
-#ifndef GL_NV_coverage_sample
-#define GL_COVERAGE_COMPONENT_NV                                0x8ED0
-#define GL_COVERAGE_COMPONENT4_NV                               0x8ED1
-#define GL_COVERAGE_ATTACHMENT_NV                               0x8ED2
-#define GL_COVERAGE_BUFFERS_NV                                  0x8ED3
-#define GL_COVERAGE_SAMPLES_NV                                  0x8ED4
-#define GL_COVERAGE_ALL_FRAGMENTS_NV                            0x8ED5
-#define GL_COVERAGE_EDGE_FRAGMENTS_NV                           0x8ED6
-#define GL_COVERAGE_AUTOMATIC_NV                                0x8ED7
-#define GL_COVERAGE_BUFFER_BIT_NV                               0x8000
-#endif
-
-/* GL_NV_depth_nonlinear */
-#ifndef GL_NV_depth_nonlinear
-#define GL_DEPTH_COMPONENT16_NONLINEAR_NV                       0x8E2C
-#endif
-
-/* GL_NV_draw_buffers */
-#ifndef GL_NV_draw_buffers
-#define GL_MAX_DRAW_BUFFERS_NV                                  0x8824
-#define GL_DRAW_BUFFER0_NV                                      0x8825
-#define GL_DRAW_BUFFER1_NV                                      0x8826
-#define GL_DRAW_BUFFER2_NV                                      0x8827
-#define GL_DRAW_BUFFER3_NV                                      0x8828
-#define GL_DRAW_BUFFER4_NV                                      0x8829
-#define GL_DRAW_BUFFER5_NV                                      0x882A
-#define GL_DRAW_BUFFER6_NV                                      0x882B
-#define GL_DRAW_BUFFER7_NV                                      0x882C
-#define GL_DRAW_BUFFER8_NV                                      0x882D
-#define GL_DRAW_BUFFER9_NV                                      0x882E
-#define GL_DRAW_BUFFER10_NV                                     0x882F
-#define GL_DRAW_BUFFER11_NV                                     0x8830
-#define GL_DRAW_BUFFER12_NV                                     0x8831
-#define GL_DRAW_BUFFER13_NV                                     0x8832
-#define GL_DRAW_BUFFER14_NV                                     0x8833
-#define GL_DRAW_BUFFER15_NV                                     0x8834
-#define GL_COLOR_ATTACHMENT0_NV                                 0x8CE0
-#define GL_COLOR_ATTACHMENT1_NV                                 0x8CE1
-#define GL_COLOR_ATTACHMENT2_NV                                 0x8CE2
-#define GL_COLOR_ATTACHMENT3_NV                                 0x8CE3
-#define GL_COLOR_ATTACHMENT4_NV                                 0x8CE4
-#define GL_COLOR_ATTACHMENT5_NV                                 0x8CE5
-#define GL_COLOR_ATTACHMENT6_NV                                 0x8CE6
-#define GL_COLOR_ATTACHMENT7_NV                                 0x8CE7
-#define GL_COLOR_ATTACHMENT8_NV                                 0x8CE8
-#define GL_COLOR_ATTACHMENT9_NV                                 0x8CE9
-#define GL_COLOR_ATTACHMENT10_NV                                0x8CEA
-#define GL_COLOR_ATTACHMENT11_NV                                0x8CEB
-#define GL_COLOR_ATTACHMENT12_NV                                0x8CEC
-#define GL_COLOR_ATTACHMENT13_NV                                0x8CED
-#define GL_COLOR_ATTACHMENT14_NV                                0x8CEE
-#define GL_COLOR_ATTACHMENT15_NV                                0x8CEF
-#endif
-
-/* GL_NV_draw_instanced */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_fbo_color_attachments */
-#ifndef GL_NV_fbo_color_attachments
-#define GL_MAX_COLOR_ATTACHMENTS_NV                             0x8CDF
-/* GL_COLOR_ATTACHMENT{0-15}_NV defined in GL_NV_draw_buffers already. */
-#endif
-
-/* GL_NV_fence */
-#ifndef GL_NV_fence
-#define GL_ALL_COMPLETED_NV                                     0x84F2
-#define GL_FENCE_STATUS_NV                                      0x84F3
-#define GL_FENCE_CONDITION_NV                                   0x84F4
-#endif
-
-/* GL_NV_framebuffer_blit */
-#ifndef GL_NV_framebuffer_blit
-#define GL_READ_FRAMEBUFFER_NV                                  0x8CA8
-#define GL_DRAW_FRAMEBUFFER_NV                                  0x8CA9
-#define GL_DRAW_FRAMEBUFFER_BINDING_NV                          0x8CA6
-#define GL_READ_FRAMEBUFFER_BINDING_NV                          0x8CAA
-#endif
-
-/* GL_NV_framebuffer_multisample */
-#ifndef GL_NV_framebuffer_multisample
-#define GL_RENDERBUFFER_SAMPLES_NV                              0x8CAB
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_NV                0x8D56
-#define GL_MAX_SAMPLES_NV                                       0x8D57
-#endif
-
-/* GL_NV_generate_mipmap_sRGB */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_instanced_arrays */
-#ifndef GL_NV_instanced_arrays
-#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_NV                       0x88FE
-#endif
-
-/* GL_NV_read_buffer */
-#ifndef GL_NV_read_buffer
-#define GL_READ_BUFFER_NV                                       0x0C02
-#endif
-
-/* GL_NV_read_buffer_front */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_read_depth */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_read_depth_stencil */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_read_stencil */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_shadow_samplers_array */
-#ifndef GL_NV_shadow_samplers_array
-#define GL_SAMPLER_2D_ARRAY_SHADOW_NV                           0x8DC4
-#endif
-
-/* GL_NV_shadow_samplers_cube */
-#ifndef GL_NV_shadow_samplers_cube
-#define GL_SAMPLER_CUBE_SHADOW_NV                               0x8DC5
-#endif
+/*
+** Copyright (c) 2013-2014 The Khronos Group Inc.
+**
+** Permission is hereby granted, free of charge, to any person obtaining a
+** copy of this software and/or associated documentation files (the
+** "Materials"), to deal in the Materials without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Materials, and to
+** permit persons to whom the Materials are furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Materials.
+**
+** THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
+*/
+/*
+** This header is generated from the Khronos OpenGL / OpenGL ES XML
+** API Registry. The current version of the Registry, generator scripts
+** used to make the header, and the header can be found at
+**   http://www.opengl.org/registry/
+**
+** Khronos $Revision: 27673 $ on $Date: 2014-08-10 16:26:49 -0700 (Sun, 10 Aug 2014) $
+*/
 
-/* GL_NV_sRGB_formats */
-#ifndef GL_NV_sRGB_formats
-#define GL_SLUMINANCE_NV                                        0x8C46
-#define GL_SLUMINANCE_ALPHA_NV                                  0x8C44
-#define GL_SRGB8_NV                                             0x8C41
-#define GL_SLUMINANCE8_NV                                       0x8C47
-#define GL_SLUMINANCE8_ALPHA8_NV                                0x8C45
-#define GL_COMPRESSED_SRGB_S3TC_DXT1_NV                         0x8C4C
-#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT1_NV                   0x8C4D
-#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT3_NV                   0x8C4E
-#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT5_NV                   0x8C4F
-#define GL_ETC1_SRGB8_NV                                        0x88EE
-#endif
-
-/* GL_NV_texture_border_clamp */
-#ifndef GL_NV_texture_border_clamp
-#define GL_TEXTURE_BORDER_COLOR_NV                              0x1004
-#define GL_CLAMP_TO_BORDER_NV                                   0x812D
+#ifndef GL_APIENTRYP
+#define GL_APIENTRYP GL_APIENTRY*
 #endif
 
-/* GL_NV_texture_compression_s3tc_update */
-/* No new tokens introduced by this extension. */
-
-/* GL_NV_texture_npot_2D_mipmap */
-/* No new tokens introduced by this extension. */
+/* Generated on date 20140810 */
 
-/*------------------------------------------------------------------------*
- * QCOM extension tokens
- *------------------------------------------------------------------------*/
+/* Generated C header for:
+ * API: gles2
+ * Profile: common
+ * Versions considered: 2\.[0-9]
+ * Versions emitted: _nomatch_^
+ * Default extensions included: gles2
+ * Additional extensions included: _nomatch_^
+ * Extensions removed: _nomatch_^
+ */
 
-/* GL_QCOM_alpha_test */
-#ifndef GL_QCOM_alpha_test
-#define GL_ALPHA_TEST_QCOM                                      0x0BC0
-#define GL_ALPHA_TEST_FUNC_QCOM                                 0x0BC1
-#define GL_ALPHA_TEST_REF_QCOM                                  0x0BC2
+#ifndef GL_KHR_blend_equation_advanced
+#define GL_KHR_blend_equation_advanced 1
+#define GL_MULTIPLY_KHR                   0x9294
+#define GL_SCREEN_KHR                     0x9295
+#define GL_OVERLAY_KHR                    0x9296
+#define GL_DARKEN_KHR                     0x9297
+#define GL_LIGHTEN_KHR                    0x9298
+#define GL_COLORDODGE_KHR                 0x9299
+#define GL_COLORBURN_KHR                  0x929A
+#define GL_HARDLIGHT_KHR                  0x929B
+#define GL_SOFTLIGHT_KHR                  0x929C
+#define GL_DIFFERENCE_KHR                 0x929E
+#define GL_EXCLUSION_KHR                  0x92A0
+#define GL_HSL_HUE_KHR                    0x92AD
+#define GL_HSL_SATURATION_KHR             0x92AE
+#define GL_HSL_COLOR_KHR                  0x92AF
+#define GL_HSL_LUMINOSITY_KHR             0x92B0
+typedef void (GL_APIENTRYP PFNGLBLENDBARRIERKHRPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glBlendBarrierKHR (void);
 #endif
+#endif /* GL_KHR_blend_equation_advanced */
 
-/* GL_QCOM_binning_control */
-#ifndef GL_QCOM_binning_control
-#define GL_BINNING_CONTROL_HINT_QCOM                            0x8FB0
-#define GL_CPU_OPTIMIZED_QCOM                                   0x8FB1
-#define GL_GPU_OPTIMIZED_QCOM                                   0x8FB2
-#define GL_RENDER_DIRECT_TO_FRAMEBUFFER_QCOM                    0x8FB3
-#endif
+#ifndef GL_KHR_blend_equation_advanced_coherent
+#define GL_KHR_blend_equation_advanced_coherent 1
+#define GL_BLEND_ADVANCED_COHERENT_KHR    0x9285
+#endif /* GL_KHR_blend_equation_advanced_coherent */
 
-/* GL_QCOM_driver_control */
-/* No new tokens introduced by this extension. */
+#ifndef GL_KHR_context_flush_control
+#define GL_KHR_context_flush_control 1
+#define GL_CONTEXT_RELEASE_BEHAVIOR_KHR   0x82FB
+#define GL_CONTEXT_RELEASE_BEHAVIOR_FLUSH_KHR 0x82FC
+#endif /* GL_KHR_context_flush_control */
 
-/* GL_QCOM_extended_get */
-#ifndef GL_QCOM_extended_get
-#define GL_TEXTURE_WIDTH_QCOM                                   0x8BD2
-#define GL_TEXTURE_HEIGHT_QCOM                                  0x8BD3
-#define GL_TEXTURE_DEPTH_QCOM                                   0x8BD4
-#define GL_TEXTURE_INTERNAL_FORMAT_QCOM                         0x8BD5
-#define GL_TEXTURE_FORMAT_QCOM                                  0x8BD6
-#define GL_TEXTURE_TYPE_QCOM                                    0x8BD7
-#define GL_TEXTURE_IMAGE_VALID_QCOM                             0x8BD8
-#define GL_TEXTURE_NUM_LEVELS_QCOM                              0x8BD9
-#define GL_TEXTURE_TARGET_QCOM                                  0x8BDA
-#define GL_TEXTURE_OBJECT_VALID_QCOM                            0x8BDB
-#define GL_STATE_RESTORE                                        0x8BDC
-#endif
-
-/* GL_QCOM_extended_get2 */
-/* No new tokens introduced by this extension. */
-
-/* GL_QCOM_perfmon_global_mode */
-#ifndef GL_QCOM_perfmon_global_mode
-#define GL_PERFMON_GLOBAL_MODE_QCOM                             0x8FA0
-#endif
+#ifndef GL_KHR_debug
+#define GL_KHR_debug 1
+typedef void (GL_APIENTRY  *GLDEBUGPROCKHR)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,const void *userParam);
+#define GL_SAMPLER                        0x82E6
+#define GL_DEBUG_OUTPUT_SYNCHRONOUS_KHR   0x8242
+#define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH_KHR 0x8243
+#define GL_DEBUG_CALLBACK_FUNCTION_KHR    0x8244
+#define GL_DEBUG_CALLBACK_USER_PARAM_KHR  0x8245
+#define GL_DEBUG_SOURCE_API_KHR           0x8246
+#define GL_DEBUG_SOURCE_WINDOW_SYSTEM_KHR 0x8247
+#define GL_DEBUG_SOURCE_SHADER_COMPILER_KHR 0x8248
+#define GL_DEBUG_SOURCE_THIRD_PARTY_KHR   0x8249
+#define GL_DEBUG_SOURCE_APPLICATION_KHR   0x824A
+#define GL_DEBUG_SOURCE_OTHER_KHR         0x824B
+#define GL_DEBUG_TYPE_ERROR_KHR           0x824C
+#define GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR_KHR 0x824D
+#define GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR_KHR 0x824E
+#define GL_DEBUG_TYPE_PORTABILITY_KHR     0x824F
+#define GL_DEBUG_TYPE_PERFORMANCE_KHR     0x8250
+#define GL_DEBUG_TYPE_OTHER_KHR           0x8251
+#define GL_DEBUG_TYPE_MARKER_KHR          0x8268
+#define GL_DEBUG_TYPE_PUSH_GROUP_KHR      0x8269
+#define GL_DEBUG_TYPE_POP_GROUP_KHR       0x826A
+#define GL_DEBUG_SEVERITY_NOTIFICATION_KHR 0x826B
+#define GL_MAX_DEBUG_GROUP_STACK_DEPTH_KHR 0x826C
+#define GL_DEBUG_GROUP_STACK_DEPTH_KHR    0x826D
+#define GL_BUFFER_KHR                     0x82E0
+#define GL_SHADER_KHR                     0x82E1
+#define GL_PROGRAM_KHR                    0x82E2
+#define GL_VERTEX_ARRAY_KHR               0x8074
+#define GL_QUERY_KHR                      0x82E3
+#define GL_SAMPLER_KHR                    0x82E6
+#define GL_MAX_LABEL_LENGTH_KHR           0x82E8
+#define GL_MAX_DEBUG_MESSAGE_LENGTH_KHR   0x9143
+#define GL_MAX_DEBUG_LOGGED_MESSAGES_KHR  0x9144
+#define GL_DEBUG_LOGGED_MESSAGES_KHR      0x9145
+#define GL_DEBUG_SEVERITY_HIGH_KHR        0x9146
+#define GL_DEBUG_SEVERITY_MEDIUM_KHR      0x9147
+#define GL_DEBUG_SEVERITY_LOW_KHR         0x9148
+#define GL_DEBUG_OUTPUT_KHR               0x92E0
+#define GL_CONTEXT_FLAG_DEBUG_BIT_KHR     0x00000002
+#define GL_STACK_OVERFLOW_KHR             0x0503
+#define GL_STACK_UNDERFLOW_KHR            0x0504
+typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGECONTROLKHRPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGEINSERTKHRPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGECALLBACKKHRPROC) (GLDEBUGPROCKHR callback, const void *userParam);
+typedef GLuint (GL_APIENTRYP PFNGLGETDEBUGMESSAGELOGKHRPROC) (GLuint count, GLsizei bufSize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+typedef void (GL_APIENTRYP PFNGLPUSHDEBUGGROUPKHRPROC) (GLenum source, GLuint id, GLsizei length, const GLchar *message);
+typedef void (GL_APIENTRYP PFNGLPOPDEBUGGROUPKHRPROC) (void);
+typedef void (GL_APIENTRYP PFNGLOBJECTLABELKHRPROC) (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETOBJECTLABELKHRPROC) (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
+typedef void (GL_APIENTRYP PFNGLOBJECTPTRLABELKHRPROC) (const void *ptr, GLsizei length, const GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETOBJECTPTRLABELKHRPROC) (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETPOINTERVKHRPROC) (GLenum pname, void **params);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDebugMessageControlKHR (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+GL_APICALL void GL_APIENTRY glDebugMessageInsertKHR (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+GL_APICALL void GL_APIENTRY glDebugMessageCallbackKHR (GLDEBUGPROCKHR callback, const void *userParam);
+GL_APICALL GLuint GL_APIENTRY glGetDebugMessageLogKHR (GLuint count, GLsizei bufSize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+GL_APICALL void GL_APIENTRY glPushDebugGroupKHR (GLenum source, GLuint id, GLsizei length, const GLchar *message);
+GL_APICALL void GL_APIENTRY glPopDebugGroupKHR (void);
+GL_APICALL void GL_APIENTRY glObjectLabelKHR (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
+GL_APICALL void GL_APIENTRY glGetObjectLabelKHR (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
+GL_APICALL void GL_APIENTRY glObjectPtrLabelKHR (const void *ptr, GLsizei length, const GLchar *label);
+GL_APICALL void GL_APIENTRY glGetObjectPtrLabelKHR (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
+GL_APICALL void GL_APIENTRY glGetPointervKHR (GLenum pname, void **params);
+#endif
+#endif /* GL_KHR_debug */
+
+#ifndef GL_KHR_robust_buffer_access_behavior
+#define GL_KHR_robust_buffer_access_behavior 1
+#endif /* GL_KHR_robust_buffer_access_behavior */
+
+#ifndef GL_KHR_robustness
+#define GL_KHR_robustness 1
+#define GL_CONTEXT_ROBUST_ACCESS_KHR      0x90F3
+#define GL_LOSE_CONTEXT_ON_RESET_KHR      0x8252
+#define GL_GUILTY_CONTEXT_RESET_KHR       0x8253
+#define GL_INNOCENT_CONTEXT_RESET_KHR     0x8254
+#define GL_UNKNOWN_CONTEXT_RESET_KHR      0x8255
+#define GL_RESET_NOTIFICATION_STRATEGY_KHR 0x8256
+#define GL_NO_RESET_NOTIFICATION_KHR      0x8261
+#define GL_CONTEXT_LOST_KHR               0x0507
+typedef GLenum (GL_APIENTRYP PFNGLGETGRAPHICSRESETSTATUSKHRPROC) (void);
+typedef void (GL_APIENTRYP PFNGLREADNPIXELSKHRPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+typedef void (GL_APIENTRYP PFNGLGETNUNIFORMFVKHRPROC) (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+typedef void (GL_APIENTRYP PFNGLGETNUNIFORMIVKHRPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params);
+typedef void (GL_APIENTRYP PFNGLGETNUNIFORMUIVKHRPROC) (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL GLenum GL_APIENTRY glGetGraphicsResetStatusKHR (void);
+GL_APICALL void GL_APIENTRY glReadnPixelsKHR (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+GL_APICALL void GL_APIENTRY glGetnUniformfvKHR (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+GL_APICALL void GL_APIENTRY glGetnUniformivKHR (GLuint program, GLint location, GLsizei bufSize, GLint *params);
+GL_APICALL void GL_APIENTRY glGetnUniformuivKHR (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
+#endif
+#endif /* GL_KHR_robustness */
+
+#ifndef GL_KHR_texture_compression_astc_hdr
+#define GL_KHR_texture_compression_astc_hdr 1
+#define GL_COMPRESSED_RGBA_ASTC_4x4_KHR   0x93B0
+#define GL_COMPRESSED_RGBA_ASTC_5x4_KHR   0x93B1
+#define GL_COMPRESSED_RGBA_ASTC_5x5_KHR   0x93B2
+#define GL_COMPRESSED_RGBA_ASTC_6x5_KHR   0x93B3
+#define GL_COMPRESSED_RGBA_ASTC_6x6_KHR   0x93B4
+#define GL_COMPRESSED_RGBA_ASTC_8x5_KHR   0x93B5
+#define GL_COMPRESSED_RGBA_ASTC_8x6_KHR   0x93B6
+#define GL_COMPRESSED_RGBA_ASTC_8x8_KHR   0x93B7
+#define GL_COMPRESSED_RGBA_ASTC_10x5_KHR  0x93B8
+#define GL_COMPRESSED_RGBA_ASTC_10x6_KHR  0x93B9
+#define GL_COMPRESSED_RGBA_ASTC_10x8_KHR  0x93BA
+#define GL_COMPRESSED_RGBA_ASTC_10x10_KHR 0x93BB
+#define GL_COMPRESSED_RGBA_ASTC_12x10_KHR 0x93BC
+#define GL_COMPRESSED_RGBA_ASTC_12x12_KHR 0x93BD
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4_KHR 0x93D0
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x4_KHR 0x93D1
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5_KHR 0x93D2
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x5_KHR 0x93D3
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6_KHR 0x93D4
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x5_KHR 0x93D5
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x6_KHR 0x93D6
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x8_KHR 0x93D7
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x5_KHR 0x93D8
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x6_KHR 0x93D9
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x8_KHR 0x93DA
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x10_KHR 0x93DB
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x10_KHR 0x93DC
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x12_KHR 0x93DD
+#endif /* GL_KHR_texture_compression_astc_hdr */
 
-/* GL_QCOM_writeonly_rendering */
-#ifndef GL_QCOM_writeonly_rendering
-#define GL_WRITEONLY_RENDERING_QCOM                             0x8823
-#endif
+#ifndef GL_KHR_texture_compression_astc_ldr
+#define GL_KHR_texture_compression_astc_ldr 1
+#endif /* GL_KHR_texture_compression_astc_ldr */
 
-/* GL_QCOM_tiled_rendering */
-#ifndef GL_QCOM_tiled_rendering
-#define GL_COLOR_BUFFER_BIT0_QCOM                               0x00000001
-#define GL_COLOR_BUFFER_BIT1_QCOM                               0x00000002
-#define GL_COLOR_BUFFER_BIT2_QCOM                               0x00000004
-#define GL_COLOR_BUFFER_BIT3_QCOM                               0x00000008
-#define GL_COLOR_BUFFER_BIT4_QCOM                               0x00000010
-#define GL_COLOR_BUFFER_BIT5_QCOM                               0x00000020
-#define GL_COLOR_BUFFER_BIT6_QCOM                               0x00000040
-#define GL_COLOR_BUFFER_BIT7_QCOM                               0x00000080
-#define GL_DEPTH_BUFFER_BIT0_QCOM                               0x00000100
-#define GL_DEPTH_BUFFER_BIT1_QCOM                               0x00000200
-#define GL_DEPTH_BUFFER_BIT2_QCOM                               0x00000400
-#define GL_DEPTH_BUFFER_BIT3_QCOM                               0x00000800
-#define GL_DEPTH_BUFFER_BIT4_QCOM                               0x00001000
-#define GL_DEPTH_BUFFER_BIT5_QCOM                               0x00002000
-#define GL_DEPTH_BUFFER_BIT6_QCOM                               0x00004000
-#define GL_DEPTH_BUFFER_BIT7_QCOM                               0x00008000
-#define GL_STENCIL_BUFFER_BIT0_QCOM                             0x00010000
-#define GL_STENCIL_BUFFER_BIT1_QCOM                             0x00020000
-#define GL_STENCIL_BUFFER_BIT2_QCOM                             0x00040000
-#define GL_STENCIL_BUFFER_BIT3_QCOM                             0x00080000
-#define GL_STENCIL_BUFFER_BIT4_QCOM                             0x00100000
-#define GL_STENCIL_BUFFER_BIT5_QCOM                             0x00200000
-#define GL_STENCIL_BUFFER_BIT6_QCOM                             0x00400000
-#define GL_STENCIL_BUFFER_BIT7_QCOM                             0x00800000
-#define GL_MULTISAMPLE_BUFFER_BIT0_QCOM                         0x01000000
-#define GL_MULTISAMPLE_BUFFER_BIT1_QCOM                         0x02000000
-#define GL_MULTISAMPLE_BUFFER_BIT2_QCOM                         0x04000000
-#define GL_MULTISAMPLE_BUFFER_BIT3_QCOM                         0x08000000
-#define GL_MULTISAMPLE_BUFFER_BIT4_QCOM                         0x10000000
-#define GL_MULTISAMPLE_BUFFER_BIT5_QCOM                         0x20000000
-#define GL_MULTISAMPLE_BUFFER_BIT6_QCOM                         0x40000000
-#define GL_MULTISAMPLE_BUFFER_BIT7_QCOM                         0x80000000
-#endif
-
-/*------------------------------------------------------------------------*
- * VIV extension tokens
- *------------------------------------------------------------------------*/
-
-/* GL_VIV_shader_binary */
-#ifndef GL_VIV_shader_binary
-#define GL_SHADER_BINARY_VIV                                    0x8FC4
+#ifndef GL_OES_EGL_image
+#define GL_OES_EGL_image 1
+typedef void *GLeglImageOES;
+typedef void (GL_APIENTRYP PFNGLEGLIMAGETARGETTEXTURE2DOESPROC) (GLenum target, GLeglImageOES image);
+typedef void (GL_APIENTRYP PFNGLEGLIMAGETARGETRENDERBUFFERSTORAGEOESPROC) (GLenum target, GLeglImageOES image);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glEGLImageTargetTexture2DOES (GLenum target, GLeglImageOES image);
+GL_APICALL void GL_APIENTRY glEGLImageTargetRenderbufferStorageOES (GLenum target, GLeglImageOES image);
 #endif
+#endif /* GL_OES_EGL_image */
 
-/*------------------------------------------------------------------------*
- * End of extension tokens, start of corresponding extension functions
- *------------------------------------------------------------------------*/
+#ifndef GL_OES_EGL_image_external
+#define GL_OES_EGL_image_external 1
+#define GL_TEXTURE_EXTERNAL_OES           0x8D65
+#define GL_TEXTURE_BINDING_EXTERNAL_OES   0x8D67
+#define GL_REQUIRED_TEXTURE_IMAGE_UNITS_OES 0x8D68
+#define GL_SAMPLER_EXTERNAL_OES           0x8D66
+#endif /* GL_OES_EGL_image_external */
 
-/*------------------------------------------------------------------------*
- * OES extension functions
- *------------------------------------------------------------------------*/
+#ifndef GL_OES_compressed_ETC1_RGB8_sub_texture
+#define GL_OES_compressed_ETC1_RGB8_sub_texture 1
+#endif /* GL_OES_compressed_ETC1_RGB8_sub_texture */
 
-/* GL_OES_compressed_ETC1_RGB8_texture */
 #ifndef GL_OES_compressed_ETC1_RGB8_texture
 #define GL_OES_compressed_ETC1_RGB8_texture 1
-#endif
+#define GL_ETC1_RGB8_OES                  0x8D64
+#endif /* GL_OES_compressed_ETC1_RGB8_texture */
 
-/* GL_OES_compressed_paletted_texture */
 #ifndef GL_OES_compressed_paletted_texture
 #define GL_OES_compressed_paletted_texture 1
-#endif
+#define GL_PALETTE4_RGB8_OES              0x8B90
+#define GL_PALETTE4_RGBA8_OES             0x8B91
+#define GL_PALETTE4_R5_G6_B5_OES          0x8B92
+#define GL_PALETTE4_RGBA4_OES             0x8B93
+#define GL_PALETTE4_RGB5_A1_OES           0x8B94
+#define GL_PALETTE8_RGB8_OES              0x8B95
+#define GL_PALETTE8_RGBA8_OES             0x8B96
+#define GL_PALETTE8_R5_G6_B5_OES          0x8B97
+#define GL_PALETTE8_RGBA4_OES             0x8B98
+#define GL_PALETTE8_RGB5_A1_OES           0x8B99
+#endif /* GL_OES_compressed_paletted_texture */
 
-/* GL_OES_depth24 */
 #ifndef GL_OES_depth24
 #define GL_OES_depth24 1
-#endif
+#define GL_DEPTH_COMPONENT24_OES          0x81A6
+#endif /* GL_OES_depth24 */
 
-/* GL_OES_depth32 */
 #ifndef GL_OES_depth32
 #define GL_OES_depth32 1
-#endif
+#define GL_DEPTH_COMPONENT32_OES          0x81A7
+#endif /* GL_OES_depth32 */
 
-/* GL_OES_depth_texture */
 #ifndef GL_OES_depth_texture
 #define GL_OES_depth_texture 1
-#endif
+#endif /* GL_OES_depth_texture */
 
-/* GL_OES_EGL_image */
-#ifndef GL_OES_EGL_image
-#define GL_OES_EGL_image 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glEGLImageTargetTexture2DOES (GLenum target, GLeglImageOES image);
-GL_APICALL void GL_APIENTRY glEGLImageTargetRenderbufferStorageOES (GLenum target, GLeglImageOES image);
-#endif
-typedef void (GL_APIENTRYP PFNGLEGLIMAGETARGETTEXTURE2DOESPROC) (GLenum target, GLeglImageOES image);
-typedef void (GL_APIENTRYP PFNGLEGLIMAGETARGETRENDERBUFFERSTORAGEOESPROC) (GLenum target, GLeglImageOES image);
-#endif
-
-/* GL_OES_EGL_image_external */
-#ifndef GL_OES_EGL_image_external
-#define GL_OES_EGL_image_external 1
-/* glEGLImageTargetTexture2DOES defined in GL_OES_EGL_image already. */
-#endif
-
-/* GL_OES_element_index_uint */
 #ifndef GL_OES_element_index_uint
 #define GL_OES_element_index_uint 1
-#endif
+#endif /* GL_OES_element_index_uint */
 
-/* GL_OES_fbo_render_mipmap */
 #ifndef GL_OES_fbo_render_mipmap
 #define GL_OES_fbo_render_mipmap 1
-#endif
+#endif /* GL_OES_fbo_render_mipmap */
 
-/* GL_OES_fragment_precision_high */
 #ifndef GL_OES_fragment_precision_high
 #define GL_OES_fragment_precision_high 1
-#endif
+#endif /* GL_OES_fragment_precision_high */
 
-/* GL_OES_get_program_binary */
 #ifndef GL_OES_get_program_binary
 #define GL_OES_get_program_binary 1
+#define GL_PROGRAM_BINARY_LENGTH_OES      0x8741
+#define GL_NUM_PROGRAM_BINARY_FORMATS_OES 0x87FE
+#define GL_PROGRAM_BINARY_FORMATS_OES     0x87FF
+typedef void (GL_APIENTRYP PFNGLGETPROGRAMBINARYOESPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, void *binary);
+typedef void (GL_APIENTRYP PFNGLPROGRAMBINARYOESPROC) (GLuint program, GLenum binaryFormat, const void *binary, GLint length);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glGetProgramBinaryOES (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, GLvoid *binary);
-GL_APICALL void GL_APIENTRY glProgramBinaryOES (GLuint program, GLenum binaryFormat, const GLvoid *binary, GLint length);
-#endif
-typedef void (GL_APIENTRYP PFNGLGETPROGRAMBINARYOESPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, GLvoid *binary);
-typedef void (GL_APIENTRYP PFNGLPROGRAMBINARYOESPROC) (GLuint program, GLenum binaryFormat, const GLvoid *binary, GLint length);
+GL_APICALL void GL_APIENTRY glGetProgramBinaryOES (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, void *binary);
+GL_APICALL void GL_APIENTRY glProgramBinaryOES (GLuint program, GLenum binaryFormat, const void *binary, GLint length);
 #endif
+#endif /* GL_OES_get_program_binary */
 
-/* GL_OES_mapbuffer */
 #ifndef GL_OES_mapbuffer
 #define GL_OES_mapbuffer 1
+#define GL_WRITE_ONLY_OES                 0x88B9
+#define GL_BUFFER_ACCESS_OES              0x88BB
+#define GL_BUFFER_MAPPED_OES              0x88BC
+#define GL_BUFFER_MAP_POINTER_OES         0x88BD
+typedef void *(GL_APIENTRYP PFNGLMAPBUFFEROESPROC) (GLenum target, GLenum access);
+typedef GLboolean (GL_APIENTRYP PFNGLUNMAPBUFFEROESPROC) (GLenum target);
+typedef void (GL_APIENTRYP PFNGLGETBUFFERPOINTERVOESPROC) (GLenum target, GLenum pname, void **params);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void* GL_APIENTRY glMapBufferOES (GLenum target, GLenum access);
+GL_APICALL void *GL_APIENTRY glMapBufferOES (GLenum target, GLenum access);
 GL_APICALL GLboolean GL_APIENTRY glUnmapBufferOES (GLenum target);
-GL_APICALL void GL_APIENTRY glGetBufferPointervOES (GLenum target, GLenum pname, GLvoid** params);
-#endif
-typedef void* (GL_APIENTRYP PFNGLMAPBUFFEROESPROC) (GLenum target, GLenum access);
-typedef GLboolean (GL_APIENTRYP PFNGLUNMAPBUFFEROESPROC) (GLenum target);
-typedef void (GL_APIENTRYP PFNGLGETBUFFERPOINTERVOESPROC) (GLenum target, GLenum pname, GLvoid** params);
+GL_APICALL void GL_APIENTRY glGetBufferPointervOES (GLenum target, GLenum pname, void **params);
 #endif
+#endif /* GL_OES_mapbuffer */
 
-/* GL_OES_packed_depth_stencil */
 #ifndef GL_OES_packed_depth_stencil
 #define GL_OES_packed_depth_stencil 1
-#endif
+#define GL_DEPTH_STENCIL_OES              0x84F9
+#define GL_UNSIGNED_INT_24_8_OES          0x84FA
+#define GL_DEPTH24_STENCIL8_OES           0x88F0
+#endif /* GL_OES_packed_depth_stencil */
 
-/* GL_OES_required_internalformat */
 #ifndef GL_OES_required_internalformat
 #define GL_OES_required_internalformat 1
-#endif
+#define GL_ALPHA8_OES                     0x803C
+#define GL_DEPTH_COMPONENT16_OES          0x81A5
+#define GL_LUMINANCE4_ALPHA4_OES          0x8043
+#define GL_LUMINANCE8_ALPHA8_OES          0x8045
+#define GL_LUMINANCE8_OES                 0x8040
+#define GL_RGBA4_OES                      0x8056
+#define GL_RGB5_A1_OES                    0x8057
+#define GL_RGB565_OES                     0x8D62
+#define GL_RGB8_OES                       0x8051
+#define GL_RGBA8_OES                      0x8058
+#define GL_RGB10_EXT                      0x8052
+#define GL_RGB10_A2_EXT                   0x8059
+#endif /* GL_OES_required_internalformat */
 
-/* GL_OES_rgb8_rgba8 */
 #ifndef GL_OES_rgb8_rgba8
 #define GL_OES_rgb8_rgba8 1
+#endif /* GL_OES_rgb8_rgba8 */
+
+#ifndef GL_OES_sample_shading
+#define GL_OES_sample_shading 1
+#define GL_SAMPLE_SHADING_OES             0x8C36
+#define GL_MIN_SAMPLE_SHADING_VALUE_OES   0x8C37
+typedef void (GL_APIENTRYP PFNGLMINSAMPLESHADINGOESPROC) (GLfloat value);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glMinSampleShadingOES (GLfloat value);
 #endif
+#endif /* GL_OES_sample_shading */
+
+#ifndef GL_OES_sample_variables
+#define GL_OES_sample_variables 1
+#endif /* GL_OES_sample_variables */
+
+#ifndef GL_OES_shader_image_atomic
+#define GL_OES_shader_image_atomic 1
+#endif /* GL_OES_shader_image_atomic */
+
+#ifndef GL_OES_shader_multisample_interpolation
+#define GL_OES_shader_multisample_interpolation 1
+#define GL_MIN_FRAGMENT_INTERPOLATION_OFFSET_OES 0x8E5B
+#define GL_MAX_FRAGMENT_INTERPOLATION_OFFSET_OES 0x8E5C
+#define GL_FRAGMENT_INTERPOLATION_OFFSET_BITS_OES 0x8E5D
+#endif /* GL_OES_shader_multisample_interpolation */
 
-/* GL_OES_standard_derivatives */
 #ifndef GL_OES_standard_derivatives
 #define GL_OES_standard_derivatives 1
-#endif
+#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT_OES 0x8B8B
+#endif /* GL_OES_standard_derivatives */
 
-/* GL_OES_stencil1 */
 #ifndef GL_OES_stencil1
 #define GL_OES_stencil1 1
-#endif
+#define GL_STENCIL_INDEX1_OES             0x8D46
+#endif /* GL_OES_stencil1 */
 
-/* GL_OES_stencil4 */
 #ifndef GL_OES_stencil4
 #define GL_OES_stencil4 1
-#endif
+#define GL_STENCIL_INDEX4_OES             0x8D47
+#endif /* GL_OES_stencil4 */
 
 #ifndef GL_OES_surfaceless_context
 #define GL_OES_surfaceless_context 1
-#endif
+#define GL_FRAMEBUFFER_UNDEFINED_OES      0x8219
+#endif /* GL_OES_surfaceless_context */
 
-/* GL_OES_texture_3D */
 #ifndef GL_OES_texture_3D
 #define GL_OES_texture_3D 1
+#define GL_TEXTURE_WRAP_R_OES             0x8072
+#define GL_TEXTURE_3D_OES                 0x806F
+#define GL_TEXTURE_BINDING_3D_OES         0x806A
+#define GL_MAX_3D_TEXTURE_SIZE_OES        0x8073
+#define GL_SAMPLER_3D_OES                 0x8B5F
+#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_OES 0x8CD4
+typedef void (GL_APIENTRYP PFNGLTEXIMAGE3DOESPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (GL_APIENTRYP PFNGLTEXSUBIMAGE3DOESPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+typedef void (GL_APIENTRYP PFNGLCOPYTEXSUBIMAGE3DOESPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (GL_APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DOESPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *data);
+typedef void (GL_APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DOESPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DOESPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glTexImage3DOES (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid* pixels);
-GL_APICALL void GL_APIENTRY glTexSubImage3DOES (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid* pixels);
+GL_APICALL void GL_APIENTRY glTexImage3DOES (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+GL_APICALL void GL_APIENTRY glTexSubImage3DOES (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
 GL_APICALL void GL_APIENTRY glCopyTexSubImage3DOES (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GL_APICALL void GL_APIENTRY glCompressedTexImage3DOES (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid* data);
-GL_APICALL void GL_APIENTRY glCompressedTexSubImage3DOES (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid* data);
+GL_APICALL void GL_APIENTRY glCompressedTexImage3DOES (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *data);
+GL_APICALL void GL_APIENTRY glCompressedTexSubImage3DOES (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
 GL_APICALL void GL_APIENTRY glFramebufferTexture3DOES (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
 #endif
-typedef void (GL_APIENTRYP PFNGLTEXIMAGE3DOESPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid* pixels);
-typedef void (GL_APIENTRYP PFNGLTEXSUBIMAGE3DOESPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid* pixels);
-typedef void (GL_APIENTRYP PFNGLCOPYTEXSUBIMAGE3DOESPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (GL_APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DOESPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid* data);
-typedef void (GL_APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DOESPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid* data);
-typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DOES) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-#endif
+#endif /* GL_OES_texture_3D */
+
+#ifndef GL_OES_texture_compression_astc
+#define GL_OES_texture_compression_astc 1
+#define GL_COMPRESSED_RGBA_ASTC_3x3x3_OES 0x93C0
+#define GL_COMPRESSED_RGBA_ASTC_4x3x3_OES 0x93C1
+#define GL_COMPRESSED_RGBA_ASTC_4x4x3_OES 0x93C2
+#define GL_COMPRESSED_RGBA_ASTC_4x4x4_OES 0x93C3
+#define GL_COMPRESSED_RGBA_ASTC_5x4x4_OES 0x93C4
+#define GL_COMPRESSED_RGBA_ASTC_5x5x4_OES 0x93C5
+#define GL_COMPRESSED_RGBA_ASTC_5x5x5_OES 0x93C6
+#define GL_COMPRESSED_RGBA_ASTC_6x5x5_OES 0x93C7
+#define GL_COMPRESSED_RGBA_ASTC_6x6x5_OES 0x93C8
+#define GL_COMPRESSED_RGBA_ASTC_6x6x6_OES 0x93C9
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_3x3x3_OES 0x93E0
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x3x3_OES 0x93E1
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4x3_OES 0x93E2
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4x4_OES 0x93E3
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x4x4_OES 0x93E4
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5x4_OES 0x93E5
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5x5_OES 0x93E6
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x5x5_OES 0x93E7
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6x5_OES 0x93E8
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6x6_OES 0x93E9
+#endif /* GL_OES_texture_compression_astc */
 
-/* GL_OES_texture_float */
 #ifndef GL_OES_texture_float
 #define GL_OES_texture_float 1
-#endif
+#endif /* GL_OES_texture_float */
 
-/* GL_OES_texture_float_linear */
 #ifndef GL_OES_texture_float_linear
 #define GL_OES_texture_float_linear 1
-#endif
+#endif /* GL_OES_texture_float_linear */
 
-/* GL_OES_texture_half_float */
 #ifndef GL_OES_texture_half_float
 #define GL_OES_texture_half_float 1
-#endif
+#define GL_HALF_FLOAT_OES                 0x8D61
+#endif /* GL_OES_texture_half_float */
 
-/* GL_OES_texture_half_float_linear */
 #ifndef GL_OES_texture_half_float_linear
 #define GL_OES_texture_half_float_linear 1
-#endif
+#endif /* GL_OES_texture_half_float_linear */
 
-/* GL_OES_texture_npot */
 #ifndef GL_OES_texture_npot
 #define GL_OES_texture_npot 1
+#endif /* GL_OES_texture_npot */
+
+#ifndef GL_OES_texture_stencil8
+#define GL_OES_texture_stencil8 1
+#define GL_STENCIL_INDEX_OES              0x1901
+#define GL_STENCIL_INDEX8_OES             0x8D48
+#endif /* GL_OES_texture_stencil8 */
+
+#ifndef GL_OES_texture_storage_multisample_2d_array
+#define GL_OES_texture_storage_multisample_2d_array 1
+#define GL_TEXTURE_2D_MULTISAMPLE_ARRAY_OES 0x9102
+#define GL_TEXTURE_BINDING_2D_MULTISAMPLE_ARRAY_OES 0x9105
+#define GL_SAMPLER_2D_MULTISAMPLE_ARRAY_OES 0x910B
+#define GL_INT_SAMPLER_2D_MULTISAMPLE_ARRAY_OES 0x910C
+#define GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE_ARRAY_OES 0x910D
+typedef void (GL_APIENTRYP PFNGLTEXSTORAGE3DMULTISAMPLEOESPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glTexStorage3DMultisampleOES (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
 #endif
+#endif /* GL_OES_texture_storage_multisample_2d_array */
 
-/* GL_OES_vertex_array_object */
 #ifndef GL_OES_vertex_array_object
 #define GL_OES_vertex_array_object 1
+#define GL_VERTEX_ARRAY_BINDING_OES       0x85B5
+typedef void (GL_APIENTRYP PFNGLBINDVERTEXARRAYOESPROC) (GLuint array);
+typedef void (GL_APIENTRYP PFNGLDELETEVERTEXARRAYSOESPROC) (GLsizei n, const GLuint *arrays);
+typedef void (GL_APIENTRYP PFNGLGENVERTEXARRAYSOESPROC) (GLsizei n, GLuint *arrays);
+typedef GLboolean (GL_APIENTRYP PFNGLISVERTEXARRAYOESPROC) (GLuint array);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glBindVertexArrayOES (GLuint array);
 GL_APICALL void GL_APIENTRY glDeleteVertexArraysOES (GLsizei n, const GLuint *arrays);
 GL_APICALL void GL_APIENTRY glGenVertexArraysOES (GLsizei n, GLuint *arrays);
 GL_APICALL GLboolean GL_APIENTRY glIsVertexArrayOES (GLuint array);
 #endif
-typedef void (GL_APIENTRYP PFNGLBINDVERTEXARRAYOESPROC) (GLuint array);
-typedef void (GL_APIENTRYP PFNGLDELETEVERTEXARRAYSOESPROC) (GLsizei n, const GLuint *arrays);
-typedef void (GL_APIENTRYP PFNGLGENVERTEXARRAYSOESPROC) (GLsizei n, GLuint *arrays);
-typedef GLboolean (GL_APIENTRYP PFNGLISVERTEXARRAYOESPROC) (GLuint array);
-#endif
+#endif /* GL_OES_vertex_array_object */
 
-/* GL_OES_vertex_half_float */
 #ifndef GL_OES_vertex_half_float
 #define GL_OES_vertex_half_float 1
-#endif
+#endif /* GL_OES_vertex_half_float */
 
-/* GL_OES_vertex_type_10_10_10_2 */
 #ifndef GL_OES_vertex_type_10_10_10_2
 #define GL_OES_vertex_type_10_10_10_2 1
-#endif
-
-/*------------------------------------------------------------------------*
- * KHR extension functions
- *------------------------------------------------------------------------*/
+#define GL_UNSIGNED_INT_10_10_10_2_OES    0x8DF6
+#define GL_INT_10_10_10_2_OES             0x8DF7
+#endif /* GL_OES_vertex_type_10_10_10_2 */
 
-#ifndef GL_KHR_debug
-#define GL_KHR_debug 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glDebugMessageControl (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-GL_APICALL void GL_APIENTRY glDebugMessageInsert (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
-GL_APICALL void GL_APIENTRY glDebugMessageCallback (GLDEBUGPROC callback, const void *userParam);
-GL_APICALL GLuint GL_APIENTRY glGetDebugMessageLog (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
-GL_APICALL void GL_APIENTRY glPushDebugGroup (GLenum source, GLuint id, GLsizei length, const GLchar *message);
-GL_APICALL void GL_APIENTRY glPopDebugGroup (void);
-GL_APICALL void GL_APIENTRY glObjectLabel (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
-GL_APICALL void GL_APIENTRY glGetObjectLabel (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
-GL_APICALL void GL_APIENTRY glObjectPtrLabel (const void *ptr, GLsizei length, const GLchar *label);
-GL_APICALL void GL_APIENTRY glGetObjectPtrLabel (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
-GL_APICALL void GL_APIENTRY glGetPointerv (GLenum pname, void **params);
-#endif
-typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGECONTROLPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGEINSERTPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
-typedef void (GL_APIENTRYP PFNGLDEBUGMESSAGECALLBACKPROC) (GLDEBUGPROC callback, const void *userParam);
-typedef GLuint (GL_APIENTRYP PFNGLGETDEBUGMESSAGELOGPROC) (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
-typedef void (GL_APIENTRYP PFNGLPUSHDEBUGGROUPPROC) (GLenum source, GLuint id, GLsizei length, const GLchar *message);
-typedef void (GL_APIENTRYP PFNGLPOPDEBUGGROUPPROC) (void);
-typedef void (GL_APIENTRYP PFNGLOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
-typedef void (GL_APIENTRYP PFNGLGETOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
-typedef void (GL_APIENTRYP PFNGLOBJECTPTRLABELPROC) (const void *ptr, GLsizei length, const GLchar *label);
-typedef void (GL_APIENTRYP PFNGLGETOBJECTPTRLABELPROC) (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
-typedef void (GL_APIENTRYP PFNGLGETPOINTERVPROC) (GLenum pname, void **params);
-#endif
-
-#ifndef GL_KHR_texture_compression_astc_ldr
-#define GL_KHR_texture_compression_astc_ldr 1
-#endif
-
-
-/*------------------------------------------------------------------------*
- * AMD extension functions
- *------------------------------------------------------------------------*/
-
-/* GL_AMD_compressed_3DC_texture */
 #ifndef GL_AMD_compressed_3DC_texture
 #define GL_AMD_compressed_3DC_texture 1
-#endif
+#define GL_3DC_X_AMD                      0x87F9
+#define GL_3DC_XY_AMD                     0x87FA
+#endif /* GL_AMD_compressed_3DC_texture */
 
-/* GL_AMD_compressed_ATC_texture */
 #ifndef GL_AMD_compressed_ATC_texture
 #define GL_AMD_compressed_ATC_texture 1
-#endif
+#define GL_ATC_RGB_AMD                    0x8C92
+#define GL_ATC_RGBA_EXPLICIT_ALPHA_AMD    0x8C93
+#define GL_ATC_RGBA_INTERPOLATED_ALPHA_AMD 0x87EE
+#endif /* GL_AMD_compressed_ATC_texture */
 
-/* AMD_performance_monitor */
 #ifndef GL_AMD_performance_monitor
 #define GL_AMD_performance_monitor 1
+#define GL_COUNTER_TYPE_AMD               0x8BC0
+#define GL_COUNTER_RANGE_AMD              0x8BC1
+#define GL_UNSIGNED_INT64_AMD             0x8BC2
+#define GL_PERCENTAGE_AMD                 0x8BC3
+#define GL_PERFMON_RESULT_AVAILABLE_AMD   0x8BC4
+#define GL_PERFMON_RESULT_SIZE_AMD        0x8BC5
+#define GL_PERFMON_RESULT_AMD             0x8BC6
+typedef void (GL_APIENTRYP PFNGLGETPERFMONITORGROUPSAMDPROC) (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
+typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERSAMDPROC) (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
+typedef void (GL_APIENTRYP PFNGLGETPERFMONITORGROUPSTRINGAMDPROC) (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
+typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERSTRINGAMDPROC) (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
+typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERINFOAMDPROC) (GLuint group, GLuint counter, GLenum pname, void *data);
+typedef void (GL_APIENTRYP PFNGLGENPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
+typedef void (GL_APIENTRYP PFNGLDELETEPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
+typedef void (GL_APIENTRYP PFNGLSELECTPERFMONITORCOUNTERSAMDPROC) (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList);
+typedef void (GL_APIENTRYP PFNGLBEGINPERFMONITORAMDPROC) (GLuint monitor);
+typedef void (GL_APIENTRYP PFNGLENDPERFMONITORAMDPROC) (GLuint monitor);
+typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERDATAAMDPROC) (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glGetPerfMonitorGroupsAMD (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
 GL_APICALL void GL_APIENTRY glGetPerfMonitorCountersAMD (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
 GL_APICALL void GL_APIENTRY glGetPerfMonitorGroupStringAMD (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
 GL_APICALL void GL_APIENTRY glGetPerfMonitorCounterStringAMD (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
-GL_APICALL void GL_APIENTRY glGetPerfMonitorCounterInfoAMD (GLuint group, GLuint counter, GLenum pname, GLvoid *data);
+GL_APICALL void GL_APIENTRY glGetPerfMonitorCounterInfoAMD (GLuint group, GLuint counter, GLenum pname, void *data);
 GL_APICALL void GL_APIENTRY glGenPerfMonitorsAMD (GLsizei n, GLuint *monitors);
 GL_APICALL void GL_APIENTRY glDeletePerfMonitorsAMD (GLsizei n, GLuint *monitors);
-GL_APICALL void GL_APIENTRY glSelectPerfMonitorCountersAMD (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *countersList);
+GL_APICALL void GL_APIENTRY glSelectPerfMonitorCountersAMD (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList);
 GL_APICALL void GL_APIENTRY glBeginPerfMonitorAMD (GLuint monitor);
 GL_APICALL void GL_APIENTRY glEndPerfMonitorAMD (GLuint monitor);
 GL_APICALL void GL_APIENTRY glGetPerfMonitorCounterDataAMD (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
 #endif
-typedef void (GL_APIENTRYP PFNGLGETPERFMONITORGROUPSAMDPROC) (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
-typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERSAMDPROC) (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
-typedef void (GL_APIENTRYP PFNGLGETPERFMONITORGROUPSTRINGAMDPROC) (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
-typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERSTRINGAMDPROC) (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
-typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERINFOAMDPROC) (GLuint group, GLuint counter, GLenum pname, GLvoid *data);
-typedef void (GL_APIENTRYP PFNGLGENPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
-typedef void (GL_APIENTRYP PFNGLDELETEPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
-typedef void (GL_APIENTRYP PFNGLSELECTPERFMONITORCOUNTERSAMDPROC) (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *countersList);
-typedef void (GL_APIENTRYP PFNGLBEGINPERFMONITORAMDPROC) (GLuint monitor);
-typedef void (GL_APIENTRYP PFNGLENDPERFMONITORAMDPROC) (GLuint monitor);
-typedef void (GL_APIENTRYP PFNGLGETPERFMONITORCOUNTERDATAAMDPROC) (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
-#endif
+#endif /* GL_AMD_performance_monitor */
 
-/* GL_AMD_program_binary_Z400 */
 #ifndef GL_AMD_program_binary_Z400
 #define GL_AMD_program_binary_Z400 1
-#endif
+#define GL_Z400_BINARY_AMD                0x8740
+#endif /* GL_AMD_program_binary_Z400 */
 
-/*------------------------------------------------------------------------*
- * ANGLE extension functions
- *------------------------------------------------------------------------*/
+#ifndef GL_ANDROID_extension_pack_es31a
+#define GL_ANDROID_extension_pack_es31a 1
+#endif /* GL_ANDROID_extension_pack_es31a */
 
-/* GL_ANGLE_depth_texture */
 #ifndef GL_ANGLE_depth_texture
 #define GL_ANGLE_depth_texture 1
-#endif
+#endif /* GL_ANGLE_depth_texture */
 
-/* GL_ANGLE_framebuffer_blit */
 #ifndef GL_ANGLE_framebuffer_blit
 #define GL_ANGLE_framebuffer_blit 1
+#define GL_READ_FRAMEBUFFER_ANGLE         0x8CA8
+#define GL_DRAW_FRAMEBUFFER_ANGLE         0x8CA9
+#define GL_DRAW_FRAMEBUFFER_BINDING_ANGLE 0x8CA6
+#define GL_READ_FRAMEBUFFER_BINDING_ANGLE 0x8CAA
+typedef void (GL_APIENTRYP PFNGLBLITFRAMEBUFFERANGLEPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glBlitFramebufferANGLE (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
 #endif
-typedef void (GL_APIENTRYP PFNGLBLITFRAMEBUFFERANGLEPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-#endif
+#endif /* GL_ANGLE_framebuffer_blit */
 
-/* GL_ANGLE_framebuffer_multisample */
 #ifndef GL_ANGLE_framebuffer_multisample
 #define GL_ANGLE_framebuffer_multisample 1
+#define GL_RENDERBUFFER_SAMPLES_ANGLE     0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_ANGLE 0x8D56
+#define GL_MAX_SAMPLES_ANGLE              0x8D57
+typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEANGLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleANGLE (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 #endif
-typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEANGLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-#endif
+#endif /* GL_ANGLE_framebuffer_multisample */
 
 #ifndef GL_ANGLE_instanced_arrays
 #define GL_ANGLE_instanced_arrays 1
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ANGLE 0x88FE
+typedef void (GL_APIENTRYP PFNGLDRAWARRAYSINSTANCEDANGLEPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLDRAWELEMENTSINSTANCEDANGLEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLVERTEXATTRIBDIVISORANGLEPROC) (GLuint index, GLuint divisor);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glDrawArraysInstancedANGLE (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
 GL_APICALL void GL_APIENTRY glDrawElementsInstancedANGLE (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
 GL_APICALL void GL_APIENTRY glVertexAttribDivisorANGLE (GLuint index, GLuint divisor);
 #endif
-typedef void (GL_APIENTRYP PFNGLDRAWARRAYSINSTANCEDANGLEPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-typedef void (GL_APIENTRYP PFNGLDRAWELEMENTSINSTANCEDANGLEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
-typedef void (GL_APIENTRYP PFNGLVERTEXATTRIBDIVISORANGLEPROC) (GLuint index, GLuint divisor);
-#endif
+#endif /* GL_ANGLE_instanced_arrays */
 
-/* GL_ANGLE_pack_reverse_row_order */
 #ifndef GL_ANGLE_pack_reverse_row_order
 #define GL_ANGLE_pack_reverse_row_order 1
-#endif
+#define GL_PACK_REVERSE_ROW_ORDER_ANGLE   0x93A4
+#endif /* GL_ANGLE_pack_reverse_row_order */
 
-/* GL_ANGLE_program_binary */
 #ifndef GL_ANGLE_program_binary
 #define GL_ANGLE_program_binary 1
-#endif
+#define GL_PROGRAM_BINARY_ANGLE           0x93A6
+#endif /* GL_ANGLE_program_binary */
 
-/* GL_ANGLE_texture_compression_dxt3 */
 #ifndef GL_ANGLE_texture_compression_dxt3
 #define GL_ANGLE_texture_compression_dxt3 1
-#endif
+#define GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE 0x83F2
+#endif /* GL_ANGLE_texture_compression_dxt3 */
 
-/* GL_ANGLE_texture_compression_dxt5 */
 #ifndef GL_ANGLE_texture_compression_dxt5
 #define GL_ANGLE_texture_compression_dxt5 1
-#endif
+#define GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE 0x83F3
+#endif /* GL_ANGLE_texture_compression_dxt5 */
 
-/* GL_ANGLE_texture_usage */
 #ifndef GL_ANGLE_texture_usage
 #define GL_ANGLE_texture_usage 1
-#endif
+#define GL_TEXTURE_USAGE_ANGLE            0x93A2
+#define GL_FRAMEBUFFER_ATTACHMENT_ANGLE   0x93A3
+#endif /* GL_ANGLE_texture_usage */
 
 #ifndef GL_ANGLE_translated_shader_source
 #define GL_ANGLE_translated_shader_source 1
+#define GL_TRANSLATED_SHADER_SOURCE_LENGTH_ANGLE 0x93A0
+typedef void (GL_APIENTRYP PFNGLGETTRANSLATEDSHADERSOURCEANGLEPROC) (GLuint shader, GLsizei bufsize, GLsizei *length, GLchar *source);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glGetTranslatedShaderSourceANGLE (GLuint shader, GLsizei bufsize, GLsizei *length, GLchar *source);
 #endif
-typedef void (GL_APIENTRYP PFNGLGETTRANSLATEDSHADERSOURCEANGLEPROC) (GLuint shader, GLsizei bufsize, GLsizei *length, GLchar *source);
-#endif
-
-/*------------------------------------------------------------------------*
- * APPLE extension functions
- *------------------------------------------------------------------------*/
+#endif /* GL_ANGLE_translated_shader_source */
 
-/* GL_APPLE_copy_texture_levels */
 #ifndef GL_APPLE_copy_texture_levels
 #define GL_APPLE_copy_texture_levels 1
+typedef void (GL_APIENTRYP PFNGLCOPYTEXTURELEVELSAPPLEPROC) (GLuint destinationTexture, GLuint sourceTexture, GLint sourceBaseLevel, GLsizei sourceLevelCount);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glCopyTextureLevelsAPPLE (GLuint destinationTexture, GLuint sourceTexture, GLint sourceBaseLevel, GLsizei sourceLevelCount);
 #endif
-typedef void (GL_APIENTRYP PFNGLCOPYTEXTURELEVELSAPPLEPROC) (GLuint destinationTexture, GLuint sourceTexture, GLint sourceBaseLevel, GLsizei sourceLevelCount);
-#endif
+#endif /* GL_APPLE_copy_texture_levels */
 
-/* GL_APPLE_framebuffer_multisample */
 #ifndef GL_APPLE_framebuffer_multisample
 #define GL_APPLE_framebuffer_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleAPPLE (GLenum, GLsizei, GLenum, GLsizei, GLsizei);
-GL_APICALL void GL_APIENTRY glResolveMultisampleFramebufferAPPLE (void);
-#endif /* GL_GLEXT_PROTOTYPES */
+#define GL_RENDERBUFFER_SAMPLES_APPLE     0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_APPLE 0x8D56
+#define GL_MAX_SAMPLES_APPLE              0x8D57
+#define GL_READ_FRAMEBUFFER_APPLE         0x8CA8
+#define GL_DRAW_FRAMEBUFFER_APPLE         0x8CA9
+#define GL_DRAW_FRAMEBUFFER_BINDING_APPLE 0x8CA6
+#define GL_READ_FRAMEBUFFER_BINDING_APPLE 0x8CAA
 typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEAPPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 typedef void (GL_APIENTRYP PFNGLRESOLVEMULTISAMPLEFRAMEBUFFERAPPLEPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleAPPLE (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void GL_APIENTRY glResolveMultisampleFramebufferAPPLE (void);
 #endif
+#endif /* GL_APPLE_framebuffer_multisample */
 
-/* GL_APPLE_rgb_422 */
 #ifndef GL_APPLE_rgb_422
 #define GL_APPLE_rgb_422 1
-#endif
+#define GL_RGB_422_APPLE                  0x8A1F
+#define GL_UNSIGNED_SHORT_8_8_APPLE       0x85BA
+#define GL_UNSIGNED_SHORT_8_8_REV_APPLE   0x85BB
+#define GL_RGB_RAW_422_APPLE              0x8A51
+#endif /* GL_APPLE_rgb_422 */
 
-/* GL_APPLE_sync */
 #ifndef GL_APPLE_sync
 #define GL_APPLE_sync 1
+#define GL_SYNC_OBJECT_APPLE              0x8A53
+#define GL_MAX_SERVER_WAIT_TIMEOUT_APPLE  0x9111
+#define GL_OBJECT_TYPE_APPLE              0x9112
+#define GL_SYNC_CONDITION_APPLE           0x9113
+#define GL_SYNC_STATUS_APPLE              0x9114
+#define GL_SYNC_FLAGS_APPLE               0x9115
+#define GL_SYNC_FENCE_APPLE               0x9116
+#define GL_SYNC_GPU_COMMANDS_COMPLETE_APPLE 0x9117
+#define GL_UNSIGNALED_APPLE               0x9118
+#define GL_SIGNALED_APPLE                 0x9119
+#define GL_ALREADY_SIGNALED_APPLE         0x911A
+#define GL_TIMEOUT_EXPIRED_APPLE          0x911B
+#define GL_CONDITION_SATISFIED_APPLE      0x911C
+#define GL_WAIT_FAILED_APPLE              0x911D
+#define GL_SYNC_FLUSH_COMMANDS_BIT_APPLE  0x00000001
+#define GL_TIMEOUT_IGNORED_APPLE          0xFFFFFFFFFFFFFFFFull
+typedef GLsync (GL_APIENTRYP PFNGLFENCESYNCAPPLEPROC) (GLenum condition, GLbitfield flags);
+typedef GLboolean (GL_APIENTRYP PFNGLISSYNCAPPLEPROC) (GLsync sync);
+typedef void (GL_APIENTRYP PFNGLDELETESYNCAPPLEPROC) (GLsync sync);
+typedef GLenum (GL_APIENTRYP PFNGLCLIENTWAITSYNCAPPLEPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
+typedef void (GL_APIENTRYP PFNGLWAITSYNCAPPLEPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
+typedef void (GL_APIENTRYP PFNGLGETINTEGER64VAPPLEPROC) (GLenum pname, GLint64 *params);
+typedef void (GL_APIENTRYP PFNGLGETSYNCIVAPPLEPROC) (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL GLsync GL_APIENTRY glFenceSyncAPPLE (GLenum condition, GLbitfield flags);
 GL_APICALL GLboolean GL_APIENTRY glIsSyncAPPLE (GLsync sync);
@@ -1342,287 +719,714 @@ GL_APICALL void GL_APIENTRY glWaitSyncAPPLE (GLsync sync, GLbitfield flags, GLui
 GL_APICALL void GL_APIENTRY glGetInteger64vAPPLE (GLenum pname, GLint64 *params);
 GL_APICALL void GL_APIENTRY glGetSyncivAPPLE (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
 #endif
-typedef GLsync (GL_APIENTRYP PFNGLFENCESYNCAPPLEPROC) (GLenum condition, GLbitfield flags);
-typedef GLboolean (GL_APIENTRYP PFNGLISSYNCAPPLEPROC) (GLsync sync);
-typedef void (GL_APIENTRYP PFNGLDELETESYNCAPPLEPROC) (GLsync sync);
-typedef GLenum (GL_APIENTRYP PFNGLCLIENTWAITSYNCAPPLEPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
-typedef void (GL_APIENTRYP PFNGLWAITSYNCAPPLEPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
-typedef void (GL_APIENTRYP PFNGLGETINTEGER64VAPPLEPROC) (GLenum pname, GLint64 *params);
-typedef void (GL_APIENTRYP PFNGLGETSYNCIVAPPLEPROC) (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
-#endif
+#endif /* GL_APPLE_sync */
 
-/* GL_APPLE_texture_format_BGRA8888 */
 #ifndef GL_APPLE_texture_format_BGRA8888
 #define GL_APPLE_texture_format_BGRA8888 1
-#endif
+#define GL_BGRA_EXT                       0x80E1
+#define GL_BGRA8_EXT                      0x93A1
+#endif /* GL_APPLE_texture_format_BGRA8888 */
 
-/* GL_APPLE_texture_max_level */
 #ifndef GL_APPLE_texture_max_level
 #define GL_APPLE_texture_max_level 1
-#endif
-
-/*------------------------------------------------------------------------*
- * ARM extension functions
- *------------------------------------------------------------------------*/
+#define GL_TEXTURE_MAX_LEVEL_APPLE        0x813D
+#endif /* GL_APPLE_texture_max_level */
 
-/* GL_ARM_mali_program_binary */
 #ifndef GL_ARM_mali_program_binary
 #define GL_ARM_mali_program_binary 1
-#endif
+#define GL_MALI_PROGRAM_BINARY_ARM        0x8F61
+#endif /* GL_ARM_mali_program_binary */
 
-/* GL_ARM_mali_shader_binary */
 #ifndef GL_ARM_mali_shader_binary
 #define GL_ARM_mali_shader_binary 1
-#endif
+#define GL_MALI_SHADER_BINARY_ARM         0x8F60
+#endif /* GL_ARM_mali_shader_binary */
 
-/* GL_ARM_rgba8 */
 #ifndef GL_ARM_rgba8
 #define GL_ARM_rgba8 1
-#endif
+#endif /* GL_ARM_rgba8 */
+
+#ifndef GL_ARM_shader_framebuffer_fetch
+#define GL_ARM_shader_framebuffer_fetch 1
+#define GL_FETCH_PER_SAMPLE_ARM           0x8F65
+#define GL_FRAGMENT_SHADER_FRAMEBUFFER_FETCH_MRT_ARM 0x8F66
+#endif /* GL_ARM_shader_framebuffer_fetch */
+
+#ifndef GL_ARM_shader_framebuffer_fetch_depth_stencil
+#define GL_ARM_shader_framebuffer_fetch_depth_stencil 1
+#endif /* GL_ARM_shader_framebuffer_fetch_depth_stencil */
 
-/*------------------------------------------------------------------------*
- * EXT extension functions
- *------------------------------------------------------------------------*/
+#ifndef GL_DMP_shader_binary
+#define GL_DMP_shader_binary 1
+#define GL_SHADER_BINARY_DMP              0x9250
+#endif /* GL_DMP_shader_binary */
 
-/* GL_EXT_blend_minmax */
 #ifndef GL_EXT_blend_minmax
 #define GL_EXT_blend_minmax 1
-#endif
+#define GL_MIN_EXT                        0x8007
+#define GL_MAX_EXT                        0x8008
+#endif /* GL_EXT_blend_minmax */
 
-/* GL_EXT_color_buffer_half_float */
 #ifndef GL_EXT_color_buffer_half_float
 #define GL_EXT_color_buffer_half_float 1
+#define GL_RGBA16F_EXT                    0x881A
+#define GL_RGB16F_EXT                     0x881B
+#define GL_RG16F_EXT                      0x822F
+#define GL_R16F_EXT                       0x822D
+#define GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE_EXT 0x8211
+#define GL_UNSIGNED_NORMALIZED_EXT        0x8C17
+#endif /* GL_EXT_color_buffer_half_float */
+
+#ifndef GL_EXT_copy_image
+#define GL_EXT_copy_image 1
+typedef void (GL_APIENTRYP PFNGLCOPYIMAGESUBDATAEXTPROC) (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei srcWidth, GLsizei srcHeight, GLsizei srcDepth);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glCopyImageSubDataEXT (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei srcWidth, GLsizei srcHeight, GLsizei srcDepth);
 #endif
+#endif /* GL_EXT_copy_image */
 
-/* GL_EXT_debug_label */
 #ifndef GL_EXT_debug_label
 #define GL_EXT_debug_label 1
+#define GL_PROGRAM_PIPELINE_OBJECT_EXT    0x8A4F
+#define GL_PROGRAM_OBJECT_EXT             0x8B40
+#define GL_SHADER_OBJECT_EXT              0x8B48
+#define GL_BUFFER_OBJECT_EXT              0x9151
+#define GL_QUERY_OBJECT_EXT               0x9153
+#define GL_VERTEX_ARRAY_OBJECT_EXT        0x9154
+#define GL_TRANSFORM_FEEDBACK             0x8E22
+typedef void (GL_APIENTRYP PFNGLLABELOBJECTEXTPROC) (GLenum type, GLuint object, GLsizei length, const GLchar *label);
+typedef void (GL_APIENTRYP PFNGLGETOBJECTLABELEXTPROC) (GLenum type, GLuint object, GLsizei bufSize, GLsizei *length, GLchar *label);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glLabelObjectEXT (GLenum type, GLuint object, GLsizei length, const GLchar *label);
 GL_APICALL void GL_APIENTRY glGetObjectLabelEXT (GLenum type, GLuint object, GLsizei bufSize, GLsizei *length, GLchar *label);
 #endif
-typedef void (GL_APIENTRYP PFNGLLABELOBJECTEXTPROC) (GLenum type, GLuint object, GLsizei length, const GLchar *label);
-typedef void (GL_APIENTRYP PFNGLGETOBJECTLABELEXTPROC) (GLenum type, GLuint object, GLsizei bufSize, GLsizei *length, GLchar *label);
-#endif
+#endif /* GL_EXT_debug_label */
 
-/* GL_EXT_debug_marker */
 #ifndef GL_EXT_debug_marker
 #define GL_EXT_debug_marker 1
+typedef void (GL_APIENTRYP PFNGLINSERTEVENTMARKEREXTPROC) (GLsizei length, const GLchar *marker);
+typedef void (GL_APIENTRYP PFNGLPUSHGROUPMARKEREXTPROC) (GLsizei length, const GLchar *marker);
+typedef void (GL_APIENTRYP PFNGLPOPGROUPMARKEREXTPROC) (void);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glInsertEventMarkerEXT (GLsizei length, const GLchar *marker);
 GL_APICALL void GL_APIENTRY glPushGroupMarkerEXT (GLsizei length, const GLchar *marker);
 GL_APICALL void GL_APIENTRY glPopGroupMarkerEXT (void);
 #endif
-typedef void (GL_APIENTRYP PFNGLINSERTEVENTMARKEREXTPROC) (GLsizei length, const GLchar *marker);
-typedef void (GL_APIENTRYP PFNGLPUSHGROUPMARKEREXTPROC) (GLsizei length, const GLchar *marker);
-typedef void (GL_APIENTRYP PFNGLPOPGROUPMARKEREXTPROC) (void);
-#endif
+#endif /* GL_EXT_debug_marker */
 
-/* GL_EXT_discard_framebuffer */
 #ifndef GL_EXT_discard_framebuffer
 #define GL_EXT_discard_framebuffer 1
+#define GL_COLOR_EXT                      0x1800
+#define GL_DEPTH_EXT                      0x1801
+#define GL_STENCIL_EXT                    0x1802
+typedef void (GL_APIENTRYP PFNGLDISCARDFRAMEBUFFEREXTPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glDiscardFramebufferEXT (GLenum target, GLsizei numAttachments, const GLenum *attachments);
 #endif
-typedef void (GL_APIENTRYP PFNGLDISCARDFRAMEBUFFEREXTPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments);
+#endif /* GL_EXT_discard_framebuffer */
+
+#ifndef GL_EXT_disjoint_timer_query
+#define GL_EXT_disjoint_timer_query 1
+#define GL_QUERY_COUNTER_BITS_EXT         0x8864
+#define GL_CURRENT_QUERY_EXT              0x8865
+#define GL_QUERY_RESULT_EXT               0x8866
+#define GL_QUERY_RESULT_AVAILABLE_EXT     0x8867
+#define GL_TIME_ELAPSED_EXT               0x88BF
+#define GL_TIMESTAMP_EXT                  0x8E28
+#define GL_GPU_DISJOINT_EXT               0x8FBB
+typedef void (GL_APIENTRYP PFNGLGENQUERIESEXTPROC) (GLsizei n, GLuint *ids);
+typedef void (GL_APIENTRYP PFNGLDELETEQUERIESEXTPROC) (GLsizei n, const GLuint *ids);
+typedef GLboolean (GL_APIENTRYP PFNGLISQUERYEXTPROC) (GLuint id);
+typedef void (GL_APIENTRYP PFNGLBEGINQUERYEXTPROC) (GLenum target, GLuint id);
+typedef void (GL_APIENTRYP PFNGLENDQUERYEXTPROC) (GLenum target);
+typedef void (GL_APIENTRYP PFNGLQUERYCOUNTEREXTPROC) (GLuint id, GLenum target);
+typedef void (GL_APIENTRYP PFNGLGETQUERYIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (GL_APIENTRYP PFNGLGETQUERYOBJECTIVEXTPROC) (GLuint id, GLenum pname, GLint *params);
+typedef void (GL_APIENTRYP PFNGLGETQUERYOBJECTUIVEXTPROC) (GLuint id, GLenum pname, GLuint *params);
+typedef void (GL_APIENTRYP PFNGLGETQUERYOBJECTI64VEXTPROC) (GLuint id, GLenum pname, GLint64 *params);
+typedef void (GL_APIENTRYP PFNGLGETQUERYOBJECTUI64VEXTPROC) (GLuint id, GLenum pname, GLuint64 *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glGenQueriesEXT (GLsizei n, GLuint *ids);
+GL_APICALL void GL_APIENTRY glDeleteQueriesEXT (GLsizei n, const GLuint *ids);
+GL_APICALL GLboolean GL_APIENTRY glIsQueryEXT (GLuint id);
+GL_APICALL void GL_APIENTRY glBeginQueryEXT (GLenum target, GLuint id);
+GL_APICALL void GL_APIENTRY glEndQueryEXT (GLenum target);
+GL_APICALL void GL_APIENTRY glQueryCounterEXT (GLuint id, GLenum target);
+GL_APICALL void GL_APIENTRY glGetQueryivEXT (GLenum target, GLenum pname, GLint *params);
+GL_APICALL void GL_APIENTRY glGetQueryObjectivEXT (GLuint id, GLenum pname, GLint *params);
+GL_APICALL void GL_APIENTRY glGetQueryObjectuivEXT (GLuint id, GLenum pname, GLuint *params);
+GL_APICALL void GL_APIENTRY glGetQueryObjecti64vEXT (GLuint id, GLenum pname, GLint64 *params);
+GL_APICALL void GL_APIENTRY glGetQueryObjectui64vEXT (GLuint id, GLenum pname, GLuint64 *params);
+#endif
+#endif /* GL_EXT_disjoint_timer_query */
+
+#ifndef GL_EXT_draw_buffers
+#define GL_EXT_draw_buffers 1
+#define GL_MAX_COLOR_ATTACHMENTS_EXT      0x8CDF
+#define GL_MAX_DRAW_BUFFERS_EXT           0x8824
+#define GL_DRAW_BUFFER0_EXT               0x8825
+#define GL_DRAW_BUFFER1_EXT               0x8826
+#define GL_DRAW_BUFFER2_EXT               0x8827
+#define GL_DRAW_BUFFER3_EXT               0x8828
+#define GL_DRAW_BUFFER4_EXT               0x8829
+#define GL_DRAW_BUFFER5_EXT               0x882A
+#define GL_DRAW_BUFFER6_EXT               0x882B
+#define GL_DRAW_BUFFER7_EXT               0x882C
+#define GL_DRAW_BUFFER8_EXT               0x882D
+#define GL_DRAW_BUFFER9_EXT               0x882E
+#define GL_DRAW_BUFFER10_EXT              0x882F
+#define GL_DRAW_BUFFER11_EXT              0x8830
+#define GL_DRAW_BUFFER12_EXT              0x8831
+#define GL_DRAW_BUFFER13_EXT              0x8832
+#define GL_DRAW_BUFFER14_EXT              0x8833
+#define GL_DRAW_BUFFER15_EXT              0x8834
+#define GL_COLOR_ATTACHMENT0_EXT          0x8CE0
+#define GL_COLOR_ATTACHMENT1_EXT          0x8CE1
+#define GL_COLOR_ATTACHMENT2_EXT          0x8CE2
+#define GL_COLOR_ATTACHMENT3_EXT          0x8CE3
+#define GL_COLOR_ATTACHMENT4_EXT          0x8CE4
+#define GL_COLOR_ATTACHMENT5_EXT          0x8CE5
+#define GL_COLOR_ATTACHMENT6_EXT          0x8CE6
+#define GL_COLOR_ATTACHMENT7_EXT          0x8CE7
+#define GL_COLOR_ATTACHMENT8_EXT          0x8CE8
+#define GL_COLOR_ATTACHMENT9_EXT          0x8CE9
+#define GL_COLOR_ATTACHMENT10_EXT         0x8CEA
+#define GL_COLOR_ATTACHMENT11_EXT         0x8CEB
+#define GL_COLOR_ATTACHMENT12_EXT         0x8CEC
+#define GL_COLOR_ATTACHMENT13_EXT         0x8CED
+#define GL_COLOR_ATTACHMENT14_EXT         0x8CEE
+#define GL_COLOR_ATTACHMENT15_EXT         0x8CEF
+typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSEXTPROC) (GLsizei n, const GLenum *bufs);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDrawBuffersEXT (GLsizei n, const GLenum *bufs);
+#endif
+#endif /* GL_EXT_draw_buffers */
+
+#ifndef GL_EXT_draw_buffers_indexed
+#define GL_EXT_draw_buffers_indexed 1
+#define GL_MIN                            0x8007
+#define GL_MAX                            0x8008
+typedef void (GL_APIENTRYP PFNGLENABLEIEXTPROC) (GLenum target, GLuint index);
+typedef void (GL_APIENTRYP PFNGLDISABLEIEXTPROC) (GLenum target, GLuint index);
+typedef void (GL_APIENTRYP PFNGLBLENDEQUATIONIEXTPROC) (GLuint buf, GLenum mode);
+typedef void (GL_APIENTRYP PFNGLBLENDEQUATIONSEPARATEIEXTPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+typedef void (GL_APIENTRYP PFNGLBLENDFUNCIEXTPROC) (GLuint buf, GLenum src, GLenum dst);
+typedef void (GL_APIENTRYP PFNGLBLENDFUNCSEPARATEIEXTPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+typedef void (GL_APIENTRYP PFNGLCOLORMASKIEXTPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
+typedef GLboolean (GL_APIENTRYP PFNGLISENABLEDIEXTPROC) (GLenum target, GLuint index);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glEnableiEXT (GLenum target, GLuint index);
+GL_APICALL void GL_APIENTRY glDisableiEXT (GLenum target, GLuint index);
+GL_APICALL void GL_APIENTRY glBlendEquationiEXT (GLuint buf, GLenum mode);
+GL_APICALL void GL_APIENTRY glBlendEquationSeparateiEXT (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+GL_APICALL void GL_APIENTRY glBlendFunciEXT (GLuint buf, GLenum src, GLenum dst);
+GL_APICALL void GL_APIENTRY glBlendFuncSeparateiEXT (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+GL_APICALL void GL_APIENTRY glColorMaskiEXT (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
+GL_APICALL GLboolean GL_APIENTRY glIsEnablediEXT (GLenum target, GLuint index);
+#endif
+#endif /* GL_EXT_draw_buffers_indexed */
+
+#ifndef GL_EXT_draw_instanced
+#define GL_EXT_draw_instanced 1
+typedef void (GL_APIENTRYP PFNGLDRAWARRAYSINSTANCEDEXTPROC) (GLenum mode, GLint start, GLsizei count, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLDRAWELEMENTSINSTANCEDEXTPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDrawArraysInstancedEXT (GLenum mode, GLint start, GLsizei count, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glDrawElementsInstancedEXT (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+#endif
+#endif /* GL_EXT_draw_instanced */
+
+#ifndef GL_EXT_geometry_point_size
+#define GL_EXT_geometry_point_size 1
+#endif /* GL_EXT_geometry_point_size */
+
+#ifndef GL_EXT_geometry_shader
+#define GL_EXT_geometry_shader 1
+#define GL_GEOMETRY_SHADER_EXT            0x8DD9
+#define GL_GEOMETRY_SHADER_BIT_EXT        0x00000004
+#define GL_GEOMETRY_LINKED_VERTICES_OUT_EXT 0x8916
+#define GL_GEOMETRY_LINKED_INPUT_TYPE_EXT 0x8917
+#define GL_GEOMETRY_LINKED_OUTPUT_TYPE_EXT 0x8918
+#define GL_GEOMETRY_SHADER_INVOCATIONS_EXT 0x887F
+#define GL_LAYER_PROVOKING_VERTEX_EXT     0x825E
+#define GL_LINES_ADJACENCY_EXT            0x000A
+#define GL_LINE_STRIP_ADJACENCY_EXT       0x000B
+#define GL_TRIANGLES_ADJACENCY_EXT        0x000C
+#define GL_TRIANGLE_STRIP_ADJACENCY_EXT   0x000D
+#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS_EXT 0x8DDF
+#define GL_MAX_GEOMETRY_UNIFORM_BLOCKS_EXT 0x8A2C
+#define GL_MAX_COMBINED_GEOMETRY_UNIFORM_COMPONENTS_EXT 0x8A32
+#define GL_MAX_GEOMETRY_INPUT_COMPONENTS_EXT 0x9123
+#define GL_MAX_GEOMETRY_OUTPUT_COMPONENTS_EXT 0x9124
+#define GL_MAX_GEOMETRY_OUTPUT_VERTICES_EXT 0x8DE0
+#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS_EXT 0x8DE1
+#define GL_MAX_GEOMETRY_SHADER_INVOCATIONS_EXT 0x8E5A
+#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_EXT 0x8C29
+#define GL_MAX_GEOMETRY_ATOMIC_COUNTER_BUFFERS_EXT 0x92CF
+#define GL_MAX_GEOMETRY_ATOMIC_COUNTERS_EXT 0x92D5
+#define GL_MAX_GEOMETRY_IMAGE_UNIFORMS_EXT 0x90CD
+#define GL_MAX_GEOMETRY_SHADER_STORAGE_BLOCKS_EXT 0x90D7
+#define GL_FIRST_VERTEX_CONVENTION_EXT    0x8E4D
+#define GL_LAST_VERTEX_CONVENTION_EXT     0x8E4E
+#define GL_UNDEFINED_VERTEX_EXT           0x8260
+#define GL_PRIMITIVES_GENERATED_EXT       0x8C87
+#define GL_FRAMEBUFFER_DEFAULT_LAYERS_EXT 0x9312
+#define GL_MAX_FRAMEBUFFER_LAYERS_EXT     0x9317
+#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_EXT 0x8DA8
+#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_EXT 0x8DA7
+#define GL_REFERENCED_BY_GEOMETRY_SHADER_EXT 0x9309
+typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTUREEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glFramebufferTextureEXT (GLenum target, GLenum attachment, GLuint texture, GLint level);
+#endif
+#endif /* GL_EXT_geometry_shader */
+
+#ifndef GL_EXT_gpu_shader5
+#define GL_EXT_gpu_shader5 1
+#endif /* GL_EXT_gpu_shader5 */
+
+#ifndef GL_EXT_instanced_arrays
+#define GL_EXT_instanced_arrays 1
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_EXT 0x88FE
+typedef void (GL_APIENTRYP PFNGLVERTEXATTRIBDIVISOREXTPROC) (GLuint index, GLuint divisor);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glVertexAttribDivisorEXT (GLuint index, GLuint divisor);
 #endif
+#endif /* GL_EXT_instanced_arrays */
 
-/* GL_EXT_map_buffer_range */
 #ifndef GL_EXT_map_buffer_range
 #define GL_EXT_map_buffer_range 1
+#define GL_MAP_READ_BIT_EXT               0x0001
+#define GL_MAP_WRITE_BIT_EXT              0x0002
+#define GL_MAP_INVALIDATE_RANGE_BIT_EXT   0x0004
+#define GL_MAP_INVALIDATE_BUFFER_BIT_EXT  0x0008
+#define GL_MAP_FLUSH_EXPLICIT_BIT_EXT     0x0010
+#define GL_MAP_UNSYNCHRONIZED_BIT_EXT     0x0020
+typedef void *(GL_APIENTRYP PFNGLMAPBUFFERRANGEEXTPROC) (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+typedef void (GL_APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEEXTPROC) (GLenum target, GLintptr offset, GLsizeiptr length);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void* GL_APIENTRY glMapBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+GL_APICALL void *GL_APIENTRY glMapBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
 GL_APICALL void GL_APIENTRY glFlushMappedBufferRangeEXT (GLenum target, GLintptr offset, GLsizeiptr length);
 #endif
-typedef void* (GL_APIENTRYP PFNGLMAPBUFFERRANGEEXTPROC) (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
-typedef void (GL_APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEEXTPROC) (GLenum target, GLintptr offset, GLsizeiptr length);
+#endif /* GL_EXT_map_buffer_range */
+
+#ifndef GL_EXT_multi_draw_arrays
+#define GL_EXT_multi_draw_arrays 1
+typedef void (GL_APIENTRYP PFNGLMULTIDRAWARRAYSEXTPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLMULTIDRAWELEMENTSEXTPROC) (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei primcount);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glMultiDrawArraysEXT (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glMultiDrawElementsEXT (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei primcount);
 #endif
+#endif /* GL_EXT_multi_draw_arrays */
 
-/* GL_EXT_multisampled_render_to_texture */
 #ifndef GL_EXT_multisampled_render_to_texture
 #define GL_EXT_multisampled_render_to_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleEXT (GLenum, GLsizei, GLenum, GLsizei, GLsizei);
-GL_APICALL void GL_APIENTRY glFramebufferTexture2DMultisampleEXT (GLenum, GLenum, GLenum, GLuint, GLint, GLsizei);
-#endif
+#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_SAMPLES_EXT 0x8D6C
+#define GL_RENDERBUFFER_SAMPLES_EXT       0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT 0x8D56
+#define GL_MAX_SAMPLES_EXT                0x8D57
 typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DMULTISAMPLEEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleEXT (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void GL_APIENTRY glFramebufferTexture2DMultisampleEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
 #endif
+#endif /* GL_EXT_multisampled_render_to_texture */
 
-/* GL_EXT_multiview_draw_buffers */
 #ifndef GL_EXT_multiview_draw_buffers
 #define GL_EXT_multiview_draw_buffers 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glReadBufferIndexedEXT (GLenum src, GLint index);
-GL_APICALL void GL_APIENTRY glDrawBuffersIndexedEXT (GLint n, const GLenum *location, const GLint *indices);
-GL_APICALL void GL_APIENTRY glGetIntegeri_vEXT (GLenum target, GLuint index, GLint *data);
-#endif
+#define GL_COLOR_ATTACHMENT_EXT           0x90F0
+#define GL_MULTIVIEW_EXT                  0x90F1
+#define GL_DRAW_BUFFER_EXT                0x0C01
+#define GL_READ_BUFFER_EXT                0x0C02
+#define GL_MAX_MULTIVIEW_BUFFERS_EXT      0x90F2
 typedef void (GL_APIENTRYP PFNGLREADBUFFERINDEXEDEXTPROC) (GLenum src, GLint index);
 typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSINDEXEDEXTPROC) (GLint n, const GLenum *location, const GLint *indices);
 typedef void (GL_APIENTRYP PFNGLGETINTEGERI_VEXTPROC) (GLenum target, GLuint index, GLint *data);
-#endif
-
-#ifndef GL_EXT_multi_draw_arrays
-#define GL_EXT_multi_draw_arrays 1
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glMultiDrawArraysEXT (GLenum, GLint *, GLsizei *, GLsizei);
-GL_APICALL void GL_APIENTRY glMultiDrawElementsEXT (GLenum, const GLsizei *, GLenum, const GLvoid* *, GLsizei);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (GL_APIENTRYP PFNGLMULTIDRAWARRAYSEXTPROC) (GLenum mode, GLint *first, GLsizei *count, GLsizei primcount);
-typedef void (GL_APIENTRYP PFNGLMULTIDRAWELEMENTSEXTPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glReadBufferIndexedEXT (GLenum src, GLint index);
+GL_APICALL void GL_APIENTRY glDrawBuffersIndexedEXT (GLint n, const GLenum *location, const GLint *indices);
+GL_APICALL void GL_APIENTRY glGetIntegeri_vEXT (GLenum target, GLuint index, GLint *data);
 #endif
+#endif /* GL_EXT_multiview_draw_buffers */
 
-/* GL_EXT_occlusion_query_boolean */
 #ifndef GL_EXT_occlusion_query_boolean
 #define GL_EXT_occlusion_query_boolean 1
+#define GL_ANY_SAMPLES_PASSED_EXT         0x8C2F
+#define GL_ANY_SAMPLES_PASSED_CONSERVATIVE_EXT 0x8D6A
+#endif /* GL_EXT_occlusion_query_boolean */
+
+#ifndef GL_EXT_primitive_bounding_box
+#define GL_EXT_primitive_bounding_box 1
+#define GL_PRIMITIVE_BOUNDING_BOX_EXT     0x92BE
+typedef void (GL_APIENTRYP PFNGLPRIMITIVEBOUNDINGBOXEXTPROC) (GLfloat minX, GLfloat minY, GLfloat minZ, GLfloat minW, GLfloat maxX, GLfloat maxY, GLfloat maxZ, GLfloat maxW);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glGenQueriesEXT (GLsizei n, GLuint *ids);
-GL_APICALL void GL_APIENTRY glDeleteQueriesEXT (GLsizei n, const GLuint *ids);
-GL_APICALL GLboolean GL_APIENTRY glIsQueryEXT (GLuint id);
-GL_APICALL void GL_APIENTRY glBeginQueryEXT (GLenum target, GLuint id);
-GL_APICALL void GL_APIENTRY glEndQueryEXT (GLenum target);
-GL_APICALL void GL_APIENTRY glGetQueryivEXT (GLenum target, GLenum pname, GLint *params);
-GL_APICALL void GL_APIENTRY glGetQueryObjectuivEXT (GLuint id, GLenum pname, GLuint *params);
-#endif
-typedef void (GL_APIENTRYP PFNGLGENQUERIESEXTPROC) (GLsizei n, GLuint *ids);
-typedef void (GL_APIENTRYP PFNGLDELETEQUERIESEXTPROC) (GLsizei n, const GLuint *ids);
-typedef GLboolean (GL_APIENTRYP PFNGLISQUERYEXTPROC) (GLuint id);
-typedef void (GL_APIENTRYP PFNGLBEGINQUERYEXTPROC) (GLenum target, GLuint id);
-typedef void (GL_APIENTRYP PFNGLENDQUERYEXTPROC) (GLenum target);
-typedef void (GL_APIENTRYP PFNGLGETQUERYIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (GL_APIENTRYP PFNGLGETQUERYOBJECTUIVEXTPROC) (GLuint id, GLenum pname, GLuint *params);
+GL_APICALL void GL_APIENTRY glPrimitiveBoundingBoxEXT (GLfloat minX, GLfloat minY, GLfloat minZ, GLfloat minW, GLfloat maxX, GLfloat maxY, GLfloat maxZ, GLfloat maxW);
 #endif
+#endif /* GL_EXT_primitive_bounding_box */
+
+#ifndef GL_EXT_pvrtc_sRGB
+#define GL_EXT_pvrtc_sRGB 1
+#define GL_COMPRESSED_SRGB_PVRTC_2BPPV1_EXT 0x8A54
+#define GL_COMPRESSED_SRGB_PVRTC_4BPPV1_EXT 0x8A55
+#define GL_COMPRESSED_SRGB_ALPHA_PVRTC_2BPPV1_EXT 0x8A56
+#define GL_COMPRESSED_SRGB_ALPHA_PVRTC_4BPPV1_EXT 0x8A57
+#define GL_COMPRESSED_SRGB_ALPHA_PVRTC_2BPPV2_IMG 0x93F0
+#define GL_COMPRESSED_SRGB_ALPHA_PVRTC_4BPPV2_IMG 0x93F1
+#endif /* GL_EXT_pvrtc_sRGB */
 
-/* GL_EXT_read_format_bgra */
 #ifndef GL_EXT_read_format_bgra
 #define GL_EXT_read_format_bgra 1
-#endif
+#define GL_UNSIGNED_SHORT_4_4_4_4_REV_EXT 0x8365
+#define GL_UNSIGNED_SHORT_1_5_5_5_REV_EXT 0x8366
+#endif /* GL_EXT_read_format_bgra */
 
-/* GL_EXT_robustness */
 #ifndef GL_EXT_robustness
 #define GL_EXT_robustness 1
+#define GL_GUILTY_CONTEXT_RESET_EXT       0x8253
+#define GL_INNOCENT_CONTEXT_RESET_EXT     0x8254
+#define GL_UNKNOWN_CONTEXT_RESET_EXT      0x8255
+#define GL_CONTEXT_ROBUST_ACCESS_EXT      0x90F3
+#define GL_RESET_NOTIFICATION_STRATEGY_EXT 0x8256
+#define GL_LOSE_CONTEXT_ON_RESET_EXT      0x8252
+#define GL_NO_RESET_NOTIFICATION_EXT      0x8261
+typedef GLenum (GL_APIENTRYP PFNGLGETGRAPHICSRESETSTATUSEXTPROC) (void);
+typedef void (GL_APIENTRYP PFNGLREADNPIXELSEXTPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+typedef void (GL_APIENTRYP PFNGLGETNUNIFORMFVEXTPROC) (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+typedef void (GL_APIENTRYP PFNGLGETNUNIFORMIVEXTPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL GLenum GL_APIENTRY glGetGraphicsResetStatusEXT (void);
 GL_APICALL void GL_APIENTRY glReadnPixelsEXT (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
-GL_APICALL void GL_APIENTRY glGetnUniformfvEXT (GLuint program, GLint location, GLsizei bufSize, float *params);
+GL_APICALL void GL_APIENTRY glGetnUniformfvEXT (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
 GL_APICALL void GL_APIENTRY glGetnUniformivEXT (GLuint program, GLint location, GLsizei bufSize, GLint *params);
 #endif
-typedef GLenum (GL_APIENTRYP PFNGLGETGRAPHICSRESETSTATUSEXTPROC) (void);
-typedef void (GL_APIENTRYP PFNGLREADNPIXELSEXTPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
-typedef void (GL_APIENTRYP PFNGLGETNUNIFORMFVEXTPROC) (GLuint program, GLint location, GLsizei bufSize, float *params);
-typedef void (GL_APIENTRYP PFNGLGETNUNIFORMIVEXTPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params);
-#endif
+#endif /* GL_EXT_robustness */
+
+#ifndef GL_EXT_sRGB
+#define GL_EXT_sRGB 1
+#define GL_SRGB_EXT                       0x8C40
+#define GL_SRGB_ALPHA_EXT                 0x8C42
+#define GL_SRGB8_ALPHA8_EXT               0x8C43
+#define GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING_EXT 0x8210
+#endif /* GL_EXT_sRGB */
+
+#ifndef GL_EXT_sRGB_write_control
+#define GL_EXT_sRGB_write_control 1
+#define GL_FRAMEBUFFER_SRGB_EXT           0x8DB9
+#endif /* GL_EXT_sRGB_write_control */
 
-/* GL_EXT_separate_shader_objects */
 #ifndef GL_EXT_separate_shader_objects
 #define GL_EXT_separate_shader_objects 1
+#define GL_ACTIVE_PROGRAM_EXT             0x8259
+#define GL_VERTEX_SHADER_BIT_EXT          0x00000001
+#define GL_FRAGMENT_SHADER_BIT_EXT        0x00000002
+#define GL_ALL_SHADER_BITS_EXT            0xFFFFFFFF
+#define GL_PROGRAM_SEPARABLE_EXT          0x8258
+#define GL_PROGRAM_PIPELINE_BINDING_EXT   0x825A
+typedef void (GL_APIENTRYP PFNGLACTIVESHADERPROGRAMEXTPROC) (GLuint pipeline, GLuint program);
+typedef void (GL_APIENTRYP PFNGLBINDPROGRAMPIPELINEEXTPROC) (GLuint pipeline);
+typedef GLuint (GL_APIENTRYP PFNGLCREATESHADERPROGRAMVEXTPROC) (GLenum type, GLsizei count, const GLchar **strings);
+typedef void (GL_APIENTRYP PFNGLDELETEPROGRAMPIPELINESEXTPROC) (GLsizei n, const GLuint *pipelines);
+typedef void (GL_APIENTRYP PFNGLGENPROGRAMPIPELINESEXTPROC) (GLsizei n, GLuint *pipelines);
+typedef void (GL_APIENTRYP PFNGLGETPROGRAMPIPELINEINFOLOGEXTPROC) (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+typedef void (GL_APIENTRYP PFNGLGETPROGRAMPIPELINEIVEXTPROC) (GLuint pipeline, GLenum pname, GLint *params);
+typedef GLboolean (GL_APIENTRYP PFNGLISPROGRAMPIPELINEEXTPROC) (GLuint pipeline);
+typedef void (GL_APIENTRYP PFNGLPROGRAMPARAMETERIEXTPROC) (GLuint program, GLenum pname, GLint value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1FEXTPROC) (GLuint program, GLint location, GLfloat v0);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1IEXTPROC) (GLuint program, GLint location, GLint v0);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLUSEPROGRAMSTAGESEXTPROC) (GLuint pipeline, GLbitfield stages, GLuint program);
+typedef void (GL_APIENTRYP PFNGLVALIDATEPROGRAMPIPELINEEXTPROC) (GLuint pipeline);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1UIEXTPROC) (GLuint program, GLint location, GLuint v0);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glUseProgramStagesEXT (GLuint pipeline, GLbitfield stages, GLuint program);
 GL_APICALL void GL_APIENTRY glActiveShaderProgramEXT (GLuint pipeline, GLuint program);
-GL_APICALL GLuint GL_APIENTRY glCreateShaderProgramvEXT (GLenum type, GLsizei count, const GLchar **strings);
 GL_APICALL void GL_APIENTRY glBindProgramPipelineEXT (GLuint pipeline);
+GL_APICALL GLuint GL_APIENTRY glCreateShaderProgramvEXT (GLenum type, GLsizei count, const GLchar **strings);
 GL_APICALL void GL_APIENTRY glDeleteProgramPipelinesEXT (GLsizei n, const GLuint *pipelines);
 GL_APICALL void GL_APIENTRY glGenProgramPipelinesEXT (GLsizei n, GLuint *pipelines);
+GL_APICALL void GL_APIENTRY glGetProgramPipelineInfoLogEXT (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+GL_APICALL void GL_APIENTRY glGetProgramPipelineivEXT (GLuint pipeline, GLenum pname, GLint *params);
 GL_APICALL GLboolean GL_APIENTRY glIsProgramPipelineEXT (GLuint pipeline);
 GL_APICALL void GL_APIENTRY glProgramParameteriEXT (GLuint program, GLenum pname, GLint value);
-GL_APICALL void GL_APIENTRY glGetProgramPipelineivEXT (GLuint pipeline, GLenum pname, GLint *params);
-GL_APICALL void GL_APIENTRY glProgramUniform1iEXT (GLuint program, GLint location, GLint x);
-GL_APICALL void GL_APIENTRY glProgramUniform2iEXT (GLuint program, GLint location, GLint x, GLint y);
-GL_APICALL void GL_APIENTRY glProgramUniform3iEXT (GLuint program, GLint location, GLint x, GLint y, GLint z);
-GL_APICALL void GL_APIENTRY glProgramUniform4iEXT (GLuint program, GLint location, GLint x, GLint y, GLint z, GLint w);
-GL_APICALL void GL_APIENTRY glProgramUniform1fEXT (GLuint program, GLint location, GLfloat x);
-GL_APICALL void GL_APIENTRY glProgramUniform2fEXT (GLuint program, GLint location, GLfloat x, GLfloat y);
-GL_APICALL void GL_APIENTRY glProgramUniform3fEXT (GLuint program, GLint location, GLfloat x, GLfloat y, GLfloat z);
-GL_APICALL void GL_APIENTRY glProgramUniform4fEXT (GLuint program, GLint location, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GL_APICALL void GL_APIENTRY glProgramUniform1ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GL_APICALL void GL_APIENTRY glProgramUniform2ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GL_APICALL void GL_APIENTRY glProgramUniform3ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GL_APICALL void GL_APIENTRY glProgramUniform4ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform1fEXT (GLuint program, GLint location, GLfloat v0);
 GL_APICALL void GL_APIENTRY glProgramUniform1fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniform1iEXT (GLuint program, GLint location, GLint v0);
+GL_APICALL void GL_APIENTRY glProgramUniform1ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform2fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1);
 GL_APICALL void GL_APIENTRY glProgramUniform2fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniform2iEXT (GLuint program, GLint location, GLint v0, GLint v1);
+GL_APICALL void GL_APIENTRY glProgramUniform2ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform3fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
 GL_APICALL void GL_APIENTRY glProgramUniform3fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniform3iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
+GL_APICALL void GL_APIENTRY glProgramUniform3ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform4fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
 GL_APICALL void GL_APIENTRY glProgramUniform4fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniform4iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+GL_APICALL void GL_APIENTRY glProgramUniform4ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
 GL_APICALL void GL_APIENTRY glProgramUniformMatrix2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
 GL_APICALL void GL_APIENTRY glProgramUniformMatrix3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
 GL_APICALL void GL_APIENTRY glProgramUniformMatrix4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glUseProgramStagesEXT (GLuint pipeline, GLbitfield stages, GLuint program);
 GL_APICALL void GL_APIENTRY glValidateProgramPipelineEXT (GLuint pipeline);
-GL_APICALL void GL_APIENTRY glGetProgramPipelineInfoLogEXT (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-#endif
-typedef void (GL_APIENTRYP PFNGLUSEPROGRAMSTAGESEXTPROC) (GLuint pipeline, GLbitfield stages, GLuint program);
-typedef void (GL_APIENTRYP PFNGLACTIVESHADERPROGRAMEXTPROC) (GLuint pipeline, GLuint program);
-typedef GLuint (GL_APIENTRYP PFNGLCREATESHADERPROGRAMVEXTPROC) (GLenum type, GLsizei count, const GLchar **strings);
-typedef void (GL_APIENTRYP PFNGLBINDPROGRAMPIPELINEEXTPROC) (GLuint pipeline);
-typedef void (GL_APIENTRYP PFNGLDELETEPROGRAMPIPELINESEXTPROC) (GLsizei n, const GLuint *pipelines);
-typedef void (GL_APIENTRYP PFNGLGENPROGRAMPIPELINESEXTPROC) (GLsizei n, GLuint *pipelines);
-typedef GLboolean (GL_APIENTRYP PFNGLISPROGRAMPIPELINEEXTPROC) (GLuint pipeline);
-typedef void (GL_APIENTRYP PFNGLPROGRAMPARAMETERIEXTPROC) (GLuint program, GLenum pname, GLint value);
-typedef void (GL_APIENTRYP PFNGLGETPROGRAMPIPELINEIVEXTPROC) (GLuint pipeline, GLenum pname, GLint *params);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1IEXTPROC) (GLuint program, GLint location, GLint x);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2IEXTPROC) (GLuint program, GLint location, GLint x, GLint y);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3IEXTPROC) (GLuint program, GLint location, GLint x, GLint y, GLint z);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4IEXTPROC) (GLuint program, GLint location, GLint x, GLint y, GLint z, GLint w);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1FEXTPROC) (GLuint program, GLint location, GLfloat x);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2FEXTPROC) (GLuint program, GLint location, GLfloat x, GLfloat y);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3FEXTPROC) (GLuint program, GLint location, GLfloat x, GLfloat y, GLfloat z);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4FEXTPROC) (GLuint program, GLint location, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM1FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM2FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM3FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORM4FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (GL_APIENTRYP PFNGLVALIDATEPROGRAMPIPELINEEXTPROC) (GLuint pipeline);
-typedef void (GL_APIENTRYP PFNGLGETPROGRAMPIPELINEINFOLOGEXTPROC) (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-#endif
+GL_APICALL void GL_APIENTRY glProgramUniform1uiEXT (GLuint program, GLint location, GLuint v0);
+GL_APICALL void GL_APIENTRY glProgramUniform2uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1);
+GL_APICALL void GL_APIENTRY glProgramUniform3uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
+GL_APICALL void GL_APIENTRY glProgramUniform4uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+GL_APICALL void GL_APIENTRY glProgramUniform1uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform2uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform3uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GL_APICALL void GL_APIENTRY glProgramUniform4uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GL_APICALL void GL_APIENTRY glProgramUniformMatrix2x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniformMatrix3x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniformMatrix2x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniformMatrix4x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniformMatrix3x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glProgramUniformMatrix4x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+#endif
+#endif /* GL_EXT_separate_shader_objects */
 
-/* GL_EXT_shader_framebuffer_fetch */
 #ifndef GL_EXT_shader_framebuffer_fetch
 #define GL_EXT_shader_framebuffer_fetch 1
-#endif
+#define GL_FRAGMENT_SHADER_DISCARDS_SAMPLES_EXT 0x8A52
+#endif /* GL_EXT_shader_framebuffer_fetch */
+
+#ifndef GL_EXT_shader_implicit_conversions
+#define GL_EXT_shader_implicit_conversions 1
+#endif /* GL_EXT_shader_implicit_conversions */
+
+#ifndef GL_EXT_shader_integer_mix
+#define GL_EXT_shader_integer_mix 1
+#endif /* GL_EXT_shader_integer_mix */
+
+#ifndef GL_EXT_shader_io_blocks
+#define GL_EXT_shader_io_blocks 1
+#endif /* GL_EXT_shader_io_blocks */
+
+#ifndef GL_EXT_shader_pixel_local_storage
+#define GL_EXT_shader_pixel_local_storage 1
+#define GL_MAX_SHADER_PIXEL_LOCAL_STORAGE_FAST_SIZE_EXT 0x8F63
+#define GL_MAX_SHADER_PIXEL_LOCAL_STORAGE_SIZE_EXT 0x8F67
+#define GL_SHADER_PIXEL_LOCAL_STORAGE_EXT 0x8F64
+#endif /* GL_EXT_shader_pixel_local_storage */
 
-/* GL_EXT_shader_texture_lod */
 #ifndef GL_EXT_shader_texture_lod
 #define GL_EXT_shader_texture_lod 1
-#endif
+#endif /* GL_EXT_shader_texture_lod */
 
-/* GL_EXT_shadow_samplers */
 #ifndef GL_EXT_shadow_samplers
 #define GL_EXT_shadow_samplers 1
+#define GL_TEXTURE_COMPARE_MODE_EXT       0x884C
+#define GL_TEXTURE_COMPARE_FUNC_EXT       0x884D
+#define GL_COMPARE_REF_TO_TEXTURE_EXT     0x884E
+#define GL_SAMPLER_2D_SHADOW_EXT          0x8B62
+#endif /* GL_EXT_shadow_samplers */
+
+#ifndef GL_EXT_tessellation_point_size
+#define GL_EXT_tessellation_point_size 1
+#endif /* GL_EXT_tessellation_point_size */
+
+#ifndef GL_EXT_tessellation_shader
+#define GL_EXT_tessellation_shader 1
+#define GL_PATCHES_EXT                    0x000E
+#define GL_PATCH_VERTICES_EXT             0x8E72
+#define GL_TESS_CONTROL_OUTPUT_VERTICES_EXT 0x8E75
+#define GL_TESS_GEN_MODE_EXT              0x8E76
+#define GL_TESS_GEN_SPACING_EXT           0x8E77
+#define GL_TESS_GEN_VERTEX_ORDER_EXT      0x8E78
+#define GL_TESS_GEN_POINT_MODE_EXT        0x8E79
+#define GL_ISOLINES_EXT                   0x8E7A
+#define GL_QUADS_EXT                      0x0007
+#define GL_FRACTIONAL_ODD_EXT             0x8E7B
+#define GL_FRACTIONAL_EVEN_EXT            0x8E7C
+#define GL_MAX_PATCH_VERTICES_EXT         0x8E7D
+#define GL_MAX_TESS_GEN_LEVEL_EXT         0x8E7E
+#define GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS_EXT 0x8E7F
+#define GL_MAX_TESS_EVALUATION_UNIFORM_COMPONENTS_EXT 0x8E80
+#define GL_MAX_TESS_CONTROL_TEXTURE_IMAGE_UNITS_EXT 0x8E81
+#define GL_MAX_TESS_EVALUATION_TEXTURE_IMAGE_UNITS_EXT 0x8E82
+#define GL_MAX_TESS_CONTROL_OUTPUT_COMPONENTS_EXT 0x8E83
+#define GL_MAX_TESS_PATCH_COMPONENTS_EXT  0x8E84
+#define GL_MAX_TESS_CONTROL_TOTAL_OUTPUT_COMPONENTS_EXT 0x8E85
+#define GL_MAX_TESS_EVALUATION_OUTPUT_COMPONENTS_EXT 0x8E86
+#define GL_MAX_TESS_CONTROL_UNIFORM_BLOCKS_EXT 0x8E89
+#define GL_MAX_TESS_EVALUATION_UNIFORM_BLOCKS_EXT 0x8E8A
+#define GL_MAX_TESS_CONTROL_INPUT_COMPONENTS_EXT 0x886C
+#define GL_MAX_TESS_EVALUATION_INPUT_COMPONENTS_EXT 0x886D
+#define GL_MAX_COMBINED_TESS_CONTROL_UNIFORM_COMPONENTS_EXT 0x8E1E
+#define GL_MAX_COMBINED_TESS_EVALUATION_UNIFORM_COMPONENTS_EXT 0x8E1F
+#define GL_MAX_TESS_CONTROL_ATOMIC_COUNTER_BUFFERS_EXT 0x92CD
+#define GL_MAX_TESS_EVALUATION_ATOMIC_COUNTER_BUFFERS_EXT 0x92CE
+#define GL_MAX_TESS_CONTROL_ATOMIC_COUNTERS_EXT 0x92D3
+#define GL_MAX_TESS_EVALUATION_ATOMIC_COUNTERS_EXT 0x92D4
+#define GL_MAX_TESS_CONTROL_IMAGE_UNIFORMS_EXT 0x90CB
+#define GL_MAX_TESS_EVALUATION_IMAGE_UNIFORMS_EXT 0x90CC
+#define GL_MAX_TESS_CONTROL_SHADER_STORAGE_BLOCKS_EXT 0x90D8
+#define GL_MAX_TESS_EVALUATION_SHADER_STORAGE_BLOCKS_EXT 0x90D9
+#define GL_PRIMITIVE_RESTART_FOR_PATCHES_SUPPORTED 0x8221
+#define GL_IS_PER_PATCH_EXT               0x92E7
+#define GL_REFERENCED_BY_TESS_CONTROL_SHADER_EXT 0x9307
+#define GL_REFERENCED_BY_TESS_EVALUATION_SHADER_EXT 0x9308
+#define GL_TESS_CONTROL_SHADER_EXT        0x8E88
+#define GL_TESS_EVALUATION_SHADER_EXT     0x8E87
+#define GL_TESS_CONTROL_SHADER_BIT_EXT    0x00000008
+#define GL_TESS_EVALUATION_SHADER_BIT_EXT 0x00000010
+typedef void (GL_APIENTRYP PFNGLPATCHPARAMETERIEXTPROC) (GLenum pname, GLint value);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glPatchParameteriEXT (GLenum pname, GLint value);
+#endif
+#endif /* GL_EXT_tessellation_shader */
+
+#ifndef GL_EXT_texture_border_clamp
+#define GL_EXT_texture_border_clamp 1
+#define GL_TEXTURE_BORDER_COLOR_EXT       0x1004
+#define GL_CLAMP_TO_BORDER_EXT            0x812D
+typedef void (GL_APIENTRYP PFNGLTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (GL_APIENTRYP PFNGLTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, const GLuint *params);
+typedef void (GL_APIENTRYP PFNGLGETTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (GL_APIENTRYP PFNGLGETTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, GLuint *params);
+typedef void (GL_APIENTRYP PFNGLSAMPLERPARAMETERIIVEXTPROC) (GLuint sampler, GLenum pname, const GLint *param);
+typedef void (GL_APIENTRYP PFNGLSAMPLERPARAMETERIUIVEXTPROC) (GLuint sampler, GLenum pname, const GLuint *param);
+typedef void (GL_APIENTRYP PFNGLGETSAMPLERPARAMETERIIVEXTPROC) (GLuint sampler, GLenum pname, GLint *params);
+typedef void (GL_APIENTRYP PFNGLGETSAMPLERPARAMETERIUIVEXTPROC) (GLuint sampler, GLenum pname, GLuint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glTexParameterIivEXT (GLenum target, GLenum pname, const GLint *params);
+GL_APICALL void GL_APIENTRY glTexParameterIuivEXT (GLenum target, GLenum pname, const GLuint *params);
+GL_APICALL void GL_APIENTRY glGetTexParameterIivEXT (GLenum target, GLenum pname, GLint *params);
+GL_APICALL void GL_APIENTRY glGetTexParameterIuivEXT (GLenum target, GLenum pname, GLuint *params);
+GL_APICALL void GL_APIENTRY glSamplerParameterIivEXT (GLuint sampler, GLenum pname, const GLint *param);
+GL_APICALL void GL_APIENTRY glSamplerParameterIuivEXT (GLuint sampler, GLenum pname, const GLuint *param);
+GL_APICALL void GL_APIENTRY glGetSamplerParameterIivEXT (GLuint sampler, GLenum pname, GLint *params);
+GL_APICALL void GL_APIENTRY glGetSamplerParameterIuivEXT (GLuint sampler, GLenum pname, GLuint *params);
+#endif
+#endif /* GL_EXT_texture_border_clamp */
+
+#ifndef GL_EXT_texture_buffer
+#define GL_EXT_texture_buffer 1
+#define GL_TEXTURE_BUFFER_EXT             0x8C2A
+#define GL_TEXTURE_BUFFER_BINDING_EXT     0x8C2A
+#define GL_MAX_TEXTURE_BUFFER_SIZE_EXT    0x8C2B
+#define GL_TEXTURE_BINDING_BUFFER_EXT     0x8C2C
+#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING_EXT 0x8C2D
+#define GL_TEXTURE_BUFFER_OFFSET_ALIGNMENT_EXT 0x919F
+#define GL_SAMPLER_BUFFER_EXT             0x8DC2
+#define GL_INT_SAMPLER_BUFFER_EXT         0x8DD0
+#define GL_UNSIGNED_INT_SAMPLER_BUFFER_EXT 0x8DD8
+#define GL_IMAGE_BUFFER_EXT               0x9051
+#define GL_INT_IMAGE_BUFFER_EXT           0x905C
+#define GL_UNSIGNED_INT_IMAGE_BUFFER_EXT  0x9067
+#define GL_TEXTURE_BUFFER_OFFSET_EXT      0x919D
+#define GL_TEXTURE_BUFFER_SIZE_EXT        0x919E
+typedef void (GL_APIENTRYP PFNGLTEXBUFFEREXTPROC) (GLenum target, GLenum internalformat, GLuint buffer);
+typedef void (GL_APIENTRYP PFNGLTEXBUFFERRANGEEXTPROC) (GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glTexBufferEXT (GLenum target, GLenum internalformat, GLuint buffer);
+GL_APICALL void GL_APIENTRY glTexBufferRangeEXT (GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
 #endif
+#endif /* GL_EXT_texture_buffer */
 
-/* GL_EXT_sRGB */
-#ifndef GL_EXT_sRGB
-#define GL_EXT_sRGB 1
-#endif
-
-/* GL_EXT_texture_compression_dxt1 */
 #ifndef GL_EXT_texture_compression_dxt1
 #define GL_EXT_texture_compression_dxt1 1
-#endif
+#define GL_COMPRESSED_RGB_S3TC_DXT1_EXT   0x83F0
+#define GL_COMPRESSED_RGBA_S3TC_DXT1_EXT  0x83F1
+#endif /* GL_EXT_texture_compression_dxt1 */
+
+#ifndef GL_EXT_texture_compression_s3tc
+#define GL_EXT_texture_compression_s3tc 1
+#define GL_COMPRESSED_RGBA_S3TC_DXT3_EXT  0x83F2
+#define GL_COMPRESSED_RGBA_S3TC_DXT5_EXT  0x83F3
+#endif /* GL_EXT_texture_compression_s3tc */
+
+#ifndef GL_EXT_texture_cube_map_array
+#define GL_EXT_texture_cube_map_array 1
+#define GL_TEXTURE_CUBE_MAP_ARRAY_EXT     0x9009
+#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY_EXT 0x900A
+#define GL_SAMPLER_CUBE_MAP_ARRAY_EXT     0x900C
+#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW_EXT 0x900D
+#define GL_INT_SAMPLER_CUBE_MAP_ARRAY_EXT 0x900E
+#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY_EXT 0x900F
+#define GL_IMAGE_CUBE_MAP_ARRAY_EXT       0x9054
+#define GL_INT_IMAGE_CUBE_MAP_ARRAY_EXT   0x905F
+#define GL_UNSIGNED_INT_IMAGE_CUBE_MAP_ARRAY_EXT 0x906A
+#endif /* GL_EXT_texture_cube_map_array */
 
-/* GL_EXT_texture_filter_anisotropic */
 #ifndef GL_EXT_texture_filter_anisotropic
 #define GL_EXT_texture_filter_anisotropic 1
-#endif
+#define GL_TEXTURE_MAX_ANISOTROPY_EXT     0x84FE
+#define GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT 0x84FF
+#endif /* GL_EXT_texture_filter_anisotropic */
 
-/* GL_EXT_texture_format_BGRA8888 */
 #ifndef GL_EXT_texture_format_BGRA8888
 #define GL_EXT_texture_format_BGRA8888 1
-#endif
+#endif /* GL_EXT_texture_format_BGRA8888 */
 
-/* GL_EXT_texture_rg */
 #ifndef GL_EXT_texture_rg
 #define GL_EXT_texture_rg 1
-#endif
+#define GL_RED_EXT                        0x1903
+#define GL_RG_EXT                         0x8227
+#define GL_R8_EXT                         0x8229
+#define GL_RG8_EXT                        0x822B
+#endif /* GL_EXT_texture_rg */
+
+#ifndef GL_EXT_texture_sRGB_decode
+#define GL_EXT_texture_sRGB_decode 1
+#define GL_TEXTURE_SRGB_DECODE_EXT        0x8A48
+#define GL_DECODE_EXT                     0x8A49
+#define GL_SKIP_DECODE_EXT                0x8A4A
+#endif /* GL_EXT_texture_sRGB_decode */
 
-/* GL_EXT_texture_storage */
 #ifndef GL_EXT_texture_storage
 #define GL_EXT_texture_storage 1
+#define GL_TEXTURE_IMMUTABLE_FORMAT_EXT   0x912F
+#define GL_ALPHA8_EXT                     0x803C
+#define GL_LUMINANCE8_EXT                 0x8040
+#define GL_LUMINANCE8_ALPHA8_EXT          0x8045
+#define GL_RGBA32F_EXT                    0x8814
+#define GL_RGB32F_EXT                     0x8815
+#define GL_ALPHA32F_EXT                   0x8816
+#define GL_LUMINANCE32F_EXT               0x8818
+#define GL_LUMINANCE_ALPHA32F_EXT         0x8819
+#define GL_ALPHA16F_EXT                   0x881C
+#define GL_LUMINANCE16F_EXT               0x881E
+#define GL_LUMINANCE_ALPHA16F_EXT         0x881F
+#define GL_R32F_EXT                       0x822E
+#define GL_RG32F_EXT                      0x8230
+typedef void (GL_APIENTRYP PFNGLTEXSTORAGE1DEXTPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
+typedef void (GL_APIENTRYP PFNGLTEXSTORAGE2DEXTPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (GL_APIENTRYP PFNGLTEXSTORAGE3DEXTPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE1DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
+typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE2DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glTexStorage1DEXT (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
 GL_APICALL void GL_APIENTRY glTexStorage2DEXT (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
@@ -1631,139 +1435,291 @@ GL_APICALL void GL_APIENTRY glTextureStorage1DEXT (GLuint texture, GLenum target
 GL_APICALL void GL_APIENTRY glTextureStorage2DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
 GL_APICALL void GL_APIENTRY glTextureStorage3DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
 #endif
-typedef void (GL_APIENTRYP PFNGLTEXSTORAGE1DEXTPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
-typedef void (GL_APIENTRYP PFNGLTEXSTORAGE2DEXTPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (GL_APIENTRYP PFNGLTEXSTORAGE3DEXTPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
-typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE1DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
-typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE2DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (GL_APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
-#endif
+#endif /* GL_EXT_texture_storage */
 
-/* GL_EXT_texture_type_2_10_10_10_REV */
 #ifndef GL_EXT_texture_type_2_10_10_10_REV
 #define GL_EXT_texture_type_2_10_10_10_REV 1
+#define GL_UNSIGNED_INT_2_10_10_10_REV_EXT 0x8368
+#endif /* GL_EXT_texture_type_2_10_10_10_REV */
+
+#ifndef GL_EXT_texture_view
+#define GL_EXT_texture_view 1
+#define GL_TEXTURE_VIEW_MIN_LEVEL_EXT     0x82DB
+#define GL_TEXTURE_VIEW_NUM_LEVELS_EXT    0x82DC
+#define GL_TEXTURE_VIEW_MIN_LAYER_EXT     0x82DD
+#define GL_TEXTURE_VIEW_NUM_LAYERS_EXT    0x82DE
+#define GL_TEXTURE_IMMUTABLE_LEVELS       0x82DF
+typedef void (GL_APIENTRYP PFNGLTEXTUREVIEWEXTPROC) (GLuint texture, GLenum target, GLuint origtexture, GLenum internalformat, GLuint minlevel, GLuint numlevels, GLuint minlayer, GLuint numlayers);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glTextureViewEXT (GLuint texture, GLenum target, GLuint origtexture, GLenum internalformat, GLuint minlevel, GLuint numlevels, GLuint minlayer, GLuint numlayers);
 #endif
+#endif /* GL_EXT_texture_view */
 
-/* GL_EXT_unpack_subimage */
 #ifndef GL_EXT_unpack_subimage
 #define GL_EXT_unpack_subimage 1
-#endif
-
-/*------------------------------------------------------------------------*
- * DMP extension functions
- *------------------------------------------------------------------------*/
-
-/* GL_DMP_shader_binary */
-#ifndef GL_DMP_shader_binary
-#define GL_DMP_shader_binary 1
-#endif
+#define GL_UNPACK_ROW_LENGTH_EXT          0x0CF2
+#define GL_UNPACK_SKIP_ROWS_EXT           0x0CF3
+#define GL_UNPACK_SKIP_PIXELS_EXT         0x0CF4
+#endif /* GL_EXT_unpack_subimage */
 
-/*------------------------------------------------------------------------*
- * FJ extension functions
- *------------------------------------------------------------------------*/
-
-/* GL_FJ_shader_binary_GCCSO */
 #ifndef GL_FJ_shader_binary_GCCSO
 #define GL_FJ_shader_binary_GCCSO 1
-#endif
+#define GL_GCCSO_SHADER_BINARY_FJ         0x9260
+#endif /* GL_FJ_shader_binary_GCCSO */
 
-/*------------------------------------------------------------------------*
- * IMG extension functions
- *------------------------------------------------------------------------*/
+#ifndef GL_IMG_multisampled_render_to_texture
+#define GL_IMG_multisampled_render_to_texture 1
+#define GL_RENDERBUFFER_SAMPLES_IMG       0x9133
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_IMG 0x9134
+#define GL_MAX_SAMPLES_IMG                0x9135
+#define GL_TEXTURE_SAMPLES_IMG            0x9136
+typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEIMGPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DMULTISAMPLEIMGPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleIMG (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void GL_APIENTRY glFramebufferTexture2DMultisampleIMG (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
+#endif
+#endif /* GL_IMG_multisampled_render_to_texture */
 
-/* GL_IMG_program_binary */
 #ifndef GL_IMG_program_binary
 #define GL_IMG_program_binary 1
-#endif
+#define GL_SGX_PROGRAM_BINARY_IMG         0x9130
+#endif /* GL_IMG_program_binary */
 
-/* GL_IMG_read_format */
 #ifndef GL_IMG_read_format
 #define GL_IMG_read_format 1
-#endif
+#define GL_BGRA_IMG                       0x80E1
+#define GL_UNSIGNED_SHORT_4_4_4_4_REV_IMG 0x8365
+#endif /* GL_IMG_read_format */
 
-/* GL_IMG_shader_binary */
 #ifndef GL_IMG_shader_binary
 #define GL_IMG_shader_binary 1
-#endif
+#define GL_SGX_BINARY_IMG                 0x8C0A
+#endif /* GL_IMG_shader_binary */
 
-/* GL_IMG_texture_compression_pvrtc */
 #ifndef GL_IMG_texture_compression_pvrtc
 #define GL_IMG_texture_compression_pvrtc 1
-#endif
+#define GL_COMPRESSED_RGB_PVRTC_4BPPV1_IMG 0x8C00
+#define GL_COMPRESSED_RGB_PVRTC_2BPPV1_IMG 0x8C01
+#define GL_COMPRESSED_RGBA_PVRTC_4BPPV1_IMG 0x8C02
+#define GL_COMPRESSED_RGBA_PVRTC_2BPPV1_IMG 0x8C03
+#endif /* GL_IMG_texture_compression_pvrtc */
 
-/* GL_IMG_texture_compression_pvrtc2 */
 #ifndef GL_IMG_texture_compression_pvrtc2
 #define GL_IMG_texture_compression_pvrtc2 1
+#define GL_COMPRESSED_RGBA_PVRTC_2BPPV2_IMG 0x9137
+#define GL_COMPRESSED_RGBA_PVRTC_4BPPV2_IMG 0x9138
+#endif /* GL_IMG_texture_compression_pvrtc2 */
+
+#ifndef GL_INTEL_performance_query
+#define GL_INTEL_performance_query 1
+#define GL_PERFQUERY_SINGLE_CONTEXT_INTEL 0x00000000
+#define GL_PERFQUERY_GLOBAL_CONTEXT_INTEL 0x00000001
+#define GL_PERFQUERY_WAIT_INTEL           0x83FB
+#define GL_PERFQUERY_FLUSH_INTEL          0x83FA
+#define GL_PERFQUERY_DONOT_FLUSH_INTEL    0x83F9
+#define GL_PERFQUERY_COUNTER_EVENT_INTEL  0x94F0
+#define GL_PERFQUERY_COUNTER_DURATION_NORM_INTEL 0x94F1
+#define GL_PERFQUERY_COUNTER_DURATION_RAW_INTEL 0x94F2
+#define GL_PERFQUERY_COUNTER_THROUGHPUT_INTEL 0x94F3
+#define GL_PERFQUERY_COUNTER_RAW_INTEL    0x94F4
+#define GL_PERFQUERY_COUNTER_TIMESTAMP_INTEL 0x94F5
+#define GL_PERFQUERY_COUNTER_DATA_UINT32_INTEL 0x94F8
+#define GL_PERFQUERY_COUNTER_DATA_UINT64_INTEL 0x94F9
+#define GL_PERFQUERY_COUNTER_DATA_FLOAT_INTEL 0x94FA
+#define GL_PERFQUERY_COUNTER_DATA_DOUBLE_INTEL 0x94FB
+#define GL_PERFQUERY_COUNTER_DATA_BOOL32_INTEL 0x94FC
+#define GL_PERFQUERY_QUERY_NAME_LENGTH_MAX_INTEL 0x94FD
+#define GL_PERFQUERY_COUNTER_NAME_LENGTH_MAX_INTEL 0x94FE
+#define GL_PERFQUERY_COUNTER_DESC_LENGTH_MAX_INTEL 0x94FF
+#define GL_PERFQUERY_GPA_EXTENDED_COUNTERS_INTEL 0x9500
+typedef void (GL_APIENTRYP PFNGLBEGINPERFQUERYINTELPROC) (GLuint queryHandle);
+typedef void (GL_APIENTRYP PFNGLCREATEPERFQUERYINTELPROC) (GLuint queryId, GLuint *queryHandle);
+typedef void (GL_APIENTRYP PFNGLDELETEPERFQUERYINTELPROC) (GLuint queryHandle);
+typedef void (GL_APIENTRYP PFNGLENDPERFQUERYINTELPROC) (GLuint queryHandle);
+typedef void (GL_APIENTRYP PFNGLGETFIRSTPERFQUERYIDINTELPROC) (GLuint *queryId);
+typedef void (GL_APIENTRYP PFNGLGETNEXTPERFQUERYIDINTELPROC) (GLuint queryId, GLuint *nextQueryId);
+typedef void (GL_APIENTRYP PFNGLGETPERFCOUNTERINFOINTELPROC) (GLuint queryId, GLuint counterId, GLuint counterNameLength, GLchar *counterName, GLuint counterDescLength, GLchar *counterDesc, GLuint *counterOffset, GLuint *counterDataSize, GLuint *counterTypeEnum, GLuint *counterDataTypeEnum, GLuint64 *rawCounterMaxValue);
+typedef void (GL_APIENTRYP PFNGLGETPERFQUERYDATAINTELPROC) (GLuint queryHandle, GLuint flags, GLsizei dataSize, GLvoid *data, GLuint *bytesWritten);
+typedef void (GL_APIENTRYP PFNGLGETPERFQUERYIDBYNAMEINTELPROC) (GLchar *queryName, GLuint *queryId);
+typedef void (GL_APIENTRYP PFNGLGETPERFQUERYINFOINTELPROC) (GLuint queryId, GLuint queryNameLength, GLchar *queryName, GLuint *dataSize, GLuint *noCounters, GLuint *noInstances, GLuint *capsMask);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glBeginPerfQueryINTEL (GLuint queryHandle);
+GL_APICALL void GL_APIENTRY glCreatePerfQueryINTEL (GLuint queryId, GLuint *queryHandle);
+GL_APICALL void GL_APIENTRY glDeletePerfQueryINTEL (GLuint queryHandle);
+GL_APICALL void GL_APIENTRY glEndPerfQueryINTEL (GLuint queryHandle);
+GL_APICALL void GL_APIENTRY glGetFirstPerfQueryIdINTEL (GLuint *queryId);
+GL_APICALL void GL_APIENTRY glGetNextPerfQueryIdINTEL (GLuint queryId, GLuint *nextQueryId);
+GL_APICALL void GL_APIENTRY glGetPerfCounterInfoINTEL (GLuint queryId, GLuint counterId, GLuint counterNameLength, GLchar *counterName, GLuint counterDescLength, GLchar *counterDesc, GLuint *counterOffset, GLuint *counterDataSize, GLuint *counterTypeEnum, GLuint *counterDataTypeEnum, GLuint64 *rawCounterMaxValue);
+GL_APICALL void GL_APIENTRY glGetPerfQueryDataINTEL (GLuint queryHandle, GLuint flags, GLsizei dataSize, GLvoid *data, GLuint *bytesWritten);
+GL_APICALL void GL_APIENTRY glGetPerfQueryIdByNameINTEL (GLchar *queryName, GLuint *queryId);
+GL_APICALL void GL_APIENTRY glGetPerfQueryInfoINTEL (GLuint queryId, GLuint queryNameLength, GLchar *queryName, GLuint *dataSize, GLuint *noCounters, GLuint *noInstances, GLuint *capsMask);
+#endif
+#endif /* GL_INTEL_performance_query */
+
+#ifndef GL_NV_blend_equation_advanced
+#define GL_NV_blend_equation_advanced 1
+#define GL_BLEND_OVERLAP_NV               0x9281
+#define GL_BLEND_PREMULTIPLIED_SRC_NV     0x9280
+#define GL_BLUE_NV                        0x1905
+#define GL_COLORBURN_NV                   0x929A
+#define GL_COLORDODGE_NV                  0x9299
+#define GL_CONJOINT_NV                    0x9284
+#define GL_CONTRAST_NV                    0x92A1
+#define GL_DARKEN_NV                      0x9297
+#define GL_DIFFERENCE_NV                  0x929E
+#define GL_DISJOINT_NV                    0x9283
+#define GL_DST_ATOP_NV                    0x928F
+#define GL_DST_IN_NV                      0x928B
+#define GL_DST_NV                         0x9287
+#define GL_DST_OUT_NV                     0x928D
+#define GL_DST_OVER_NV                    0x9289
+#define GL_EXCLUSION_NV                   0x92A0
+#define GL_GREEN_NV                       0x1904
+#define GL_HARDLIGHT_NV                   0x929B
+#define GL_HARDMIX_NV                     0x92A9
+#define GL_HSL_COLOR_NV                   0x92AF
+#define GL_HSL_HUE_NV                     0x92AD
+#define GL_HSL_LUMINOSITY_NV              0x92B0
+#define GL_HSL_SATURATION_NV              0x92AE
+#define GL_INVERT_OVG_NV                  0x92B4
+#define GL_INVERT_RGB_NV                  0x92A3
+#define GL_LIGHTEN_NV                     0x9298
+#define GL_LINEARBURN_NV                  0x92A5
+#define GL_LINEARDODGE_NV                 0x92A4
+#define GL_LINEARLIGHT_NV                 0x92A7
+#define GL_MINUS_CLAMPED_NV               0x92B3
+#define GL_MINUS_NV                       0x929F
+#define GL_MULTIPLY_NV                    0x9294
+#define GL_OVERLAY_NV                     0x9296
+#define GL_PINLIGHT_NV                    0x92A8
+#define GL_PLUS_CLAMPED_ALPHA_NV          0x92B2
+#define GL_PLUS_CLAMPED_NV                0x92B1
+#define GL_PLUS_DARKER_NV                 0x9292
+#define GL_PLUS_NV                        0x9291
+#define GL_RED_NV                         0x1903
+#define GL_SCREEN_NV                      0x9295
+#define GL_SOFTLIGHT_NV                   0x929C
+#define GL_SRC_ATOP_NV                    0x928E
+#define GL_SRC_IN_NV                      0x928A
+#define GL_SRC_NV                         0x9286
+#define GL_SRC_OUT_NV                     0x928C
+#define GL_SRC_OVER_NV                    0x9288
+#define GL_UNCORRELATED_NV                0x9282
+#define GL_VIVIDLIGHT_NV                  0x92A6
+#define GL_XOR_NV                         0x1506
+typedef void (GL_APIENTRYP PFNGLBLENDPARAMETERINVPROC) (GLenum pname, GLint value);
+typedef void (GL_APIENTRYP PFNGLBLENDBARRIERNVPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glBlendParameteriNV (GLenum pname, GLint value);
+GL_APICALL void GL_APIENTRY glBlendBarrierNV (void);
 #endif
+#endif /* GL_NV_blend_equation_advanced */
 
-/* GL_IMG_multisampled_render_to_texture */
-#ifndef GL_IMG_multisampled_render_to_texture
-#define GL_IMG_multisampled_render_to_texture 1
+#ifndef GL_NV_blend_equation_advanced_coherent
+#define GL_NV_blend_equation_advanced_coherent 1
+#define GL_BLEND_ADVANCED_COHERENT_NV     0x9285
+#endif /* GL_NV_blend_equation_advanced_coherent */
+
+#ifndef GL_NV_copy_buffer
+#define GL_NV_copy_buffer 1
+#define GL_COPY_READ_BUFFER_NV            0x8F36
+#define GL_COPY_WRITE_BUFFER_NV           0x8F37
+typedef void (GL_APIENTRYP PFNGLCOPYBUFFERSUBDATANVPROC) (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleIMG (GLenum, GLsizei, GLenum, GLsizei, GLsizei);
-GL_APICALL void GL_APIENTRY glFramebufferTexture2DMultisampleIMG (GLenum, GLenum, GLenum, GLuint, GLint, GLsizei);
-#endif
-typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEIMGPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (GL_APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DMULTISAMPLEIMGPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLsizei samples);
+GL_APICALL void GL_APIENTRY glCopyBufferSubDataNV (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
 #endif
+#endif /* GL_NV_copy_buffer */
 
-/*------------------------------------------------------------------------*
- * NV extension functions
- *------------------------------------------------------------------------*/
-
-/* GL_NV_coverage_sample */
 #ifndef GL_NV_coverage_sample
 #define GL_NV_coverage_sample 1
+#define GL_COVERAGE_COMPONENT_NV          0x8ED0
+#define GL_COVERAGE_COMPONENT4_NV         0x8ED1
+#define GL_COVERAGE_ATTACHMENT_NV         0x8ED2
+#define GL_COVERAGE_BUFFERS_NV            0x8ED3
+#define GL_COVERAGE_SAMPLES_NV            0x8ED4
+#define GL_COVERAGE_ALL_FRAGMENTS_NV      0x8ED5
+#define GL_COVERAGE_EDGE_FRAGMENTS_NV     0x8ED6
+#define GL_COVERAGE_AUTOMATIC_NV          0x8ED7
+#define GL_COVERAGE_BUFFER_BIT_NV         0x00008000
+typedef void (GL_APIENTRYP PFNGLCOVERAGEMASKNVPROC) (GLboolean mask);
+typedef void (GL_APIENTRYP PFNGLCOVERAGEOPERATIONNVPROC) (GLenum operation);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glCoverageMaskNV (GLboolean mask);
 GL_APICALL void GL_APIENTRY glCoverageOperationNV (GLenum operation);
 #endif
-typedef void (GL_APIENTRYP PFNGLCOVERAGEMASKNVPROC) (GLboolean mask);
-typedef void (GL_APIENTRYP PFNGLCOVERAGEOPERATIONNVPROC) (GLenum operation);
-#endif
+#endif /* GL_NV_coverage_sample */
 
-/* GL_NV_depth_nonlinear */
 #ifndef GL_NV_depth_nonlinear
 #define GL_NV_depth_nonlinear 1
-#endif
+#define GL_DEPTH_COMPONENT16_NONLINEAR_NV 0x8E2C
+#endif /* GL_NV_depth_nonlinear */
 
-/* GL_NV_draw_buffers */
 #ifndef GL_NV_draw_buffers
 #define GL_NV_draw_buffers 1
+#define GL_MAX_DRAW_BUFFERS_NV            0x8824
+#define GL_DRAW_BUFFER0_NV                0x8825
+#define GL_DRAW_BUFFER1_NV                0x8826
+#define GL_DRAW_BUFFER2_NV                0x8827
+#define GL_DRAW_BUFFER3_NV                0x8828
+#define GL_DRAW_BUFFER4_NV                0x8829
+#define GL_DRAW_BUFFER5_NV                0x882A
+#define GL_DRAW_BUFFER6_NV                0x882B
+#define GL_DRAW_BUFFER7_NV                0x882C
+#define GL_DRAW_BUFFER8_NV                0x882D
+#define GL_DRAW_BUFFER9_NV                0x882E
+#define GL_DRAW_BUFFER10_NV               0x882F
+#define GL_DRAW_BUFFER11_NV               0x8830
+#define GL_DRAW_BUFFER12_NV               0x8831
+#define GL_DRAW_BUFFER13_NV               0x8832
+#define GL_DRAW_BUFFER14_NV               0x8833
+#define GL_DRAW_BUFFER15_NV               0x8834
+#define GL_COLOR_ATTACHMENT0_NV           0x8CE0
+#define GL_COLOR_ATTACHMENT1_NV           0x8CE1
+#define GL_COLOR_ATTACHMENT2_NV           0x8CE2
+#define GL_COLOR_ATTACHMENT3_NV           0x8CE3
+#define GL_COLOR_ATTACHMENT4_NV           0x8CE4
+#define GL_COLOR_ATTACHMENT5_NV           0x8CE5
+#define GL_COLOR_ATTACHMENT6_NV           0x8CE6
+#define GL_COLOR_ATTACHMENT7_NV           0x8CE7
+#define GL_COLOR_ATTACHMENT8_NV           0x8CE8
+#define GL_COLOR_ATTACHMENT9_NV           0x8CE9
+#define GL_COLOR_ATTACHMENT10_NV          0x8CEA
+#define GL_COLOR_ATTACHMENT11_NV          0x8CEB
+#define GL_COLOR_ATTACHMENT12_NV          0x8CEC
+#define GL_COLOR_ATTACHMENT13_NV          0x8CED
+#define GL_COLOR_ATTACHMENT14_NV          0x8CEE
+#define GL_COLOR_ATTACHMENT15_NV          0x8CEF
+typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSNVPROC) (GLsizei n, const GLenum *bufs);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glDrawBuffersNV (GLsizei n, const GLenum *bufs);
 #endif
-typedef void (GL_APIENTRYP PFNGLDRAWBUFFERSNVPROC) (GLsizei n, const GLenum *bufs);
-#endif
+#endif /* GL_NV_draw_buffers */
 
-/* GL_NV_draw_instanced */
 #ifndef GL_NV_draw_instanced
 #define GL_NV_draw_instanced 1
+typedef void (GL_APIENTRYP PFNGLDRAWARRAYSINSTANCEDNVPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+typedef void (GL_APIENTRYP PFNGLDRAWELEMENTSINSTANCEDNVPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glDrawArraysInstancedNV (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-GL_APICALL void GL_APIENTRY glDrawElementsInstancedNV (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
-#endif
-typedef void (GL_APIENTRYP PFNDRAWARRAYSINSTANCEDNVPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-typedef void (GL_APIENTRYP PFNDRAWELEMENTSINSTANCEDNVPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
+GL_APICALL void GL_APIENTRY glDrawElementsInstancedNV (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
 #endif
+#endif /* GL_NV_draw_instanced */
+
+#ifndef GL_NV_explicit_attrib_location
+#define GL_NV_explicit_attrib_location 1
+#endif /* GL_NV_explicit_attrib_location */
 
-/* GL_NV_fbo_color_attachments */
 #ifndef GL_NV_fbo_color_attachments
 #define GL_NV_fbo_color_attachments 1
-#endif
+#define GL_MAX_COLOR_ATTACHMENTS_NV       0x8CDF
+#endif /* GL_NV_fbo_color_attachments */
 
-/* GL_NV_fence */
 #ifndef GL_NV_fence
 #define GL_NV_fence 1
-#ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glDeleteFencesNV (GLsizei, const GLuint *);
-GL_APICALL void GL_APIENTRY glGenFencesNV (GLsizei, GLuint *);
-GL_APICALL GLboolean GL_APIENTRY glIsFenceNV (GLuint);
-GL_APICALL GLboolean GL_APIENTRY glTestFenceNV (GLuint);
-GL_APICALL void GL_APIENTRY glGetFenceivNV (GLuint, GLenum, GLint *);
-GL_APICALL void GL_APIENTRY glFinishFenceNV (GLuint);
-GL_APICALL void GL_APIENTRY glSetFenceNV (GLuint, GLenum);
-#endif
+#define GL_ALL_COMPLETED_NV               0x84F2
+#define GL_FENCE_STATUS_NV                0x84F3
+#define GL_FENCE_CONDITION_NV             0x84F4
 typedef void (GL_APIENTRYP PFNGLDELETEFENCESNVPROC) (GLsizei n, const GLuint *fences);
 typedef void (GL_APIENTRYP PFNGLGENFENCESNVPROC) (GLsizei n, GLuint *fences);
 typedef GLboolean (GL_APIENTRYP PFNGLISFENCENVPROC) (GLuint fence);
@@ -1771,135 +1727,194 @@ typedef GLboolean (GL_APIENTRYP PFNGLTESTFENCENVPROC) (GLuint fence);
 typedef void (GL_APIENTRYP PFNGLGETFENCEIVNVPROC) (GLuint fence, GLenum pname, GLint *params);
 typedef void (GL_APIENTRYP PFNGLFINISHFENCENVPROC) (GLuint fence);
 typedef void (GL_APIENTRYP PFNGLSETFENCENVPROC) (GLuint fence, GLenum condition);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glDeleteFencesNV (GLsizei n, const GLuint *fences);
+GL_APICALL void GL_APIENTRY glGenFencesNV (GLsizei n, GLuint *fences);
+GL_APICALL GLboolean GL_APIENTRY glIsFenceNV (GLuint fence);
+GL_APICALL GLboolean GL_APIENTRY glTestFenceNV (GLuint fence);
+GL_APICALL void GL_APIENTRY glGetFenceivNV (GLuint fence, GLenum pname, GLint *params);
+GL_APICALL void GL_APIENTRY glFinishFenceNV (GLuint fence);
+GL_APICALL void GL_APIENTRY glSetFenceNV (GLuint fence, GLenum condition);
 #endif
+#endif /* GL_NV_fence */
 
-/* GL_NV_framebuffer_blit */
 #ifndef GL_NV_framebuffer_blit
 #define GL_NV_framebuffer_blit 1
+#define GL_READ_FRAMEBUFFER_NV            0x8CA8
+#define GL_DRAW_FRAMEBUFFER_NV            0x8CA9
+#define GL_DRAW_FRAMEBUFFER_BINDING_NV    0x8CA6
+#define GL_READ_FRAMEBUFFER_BINDING_NV    0x8CAA
+typedef void (GL_APIENTRYP PFNGLBLITFRAMEBUFFERNVPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glBlitFramebufferNV (int srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-#endif
-typedef void (GL_APIENTRYP PFNBLITFRAMEBUFFERNVPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+GL_APICALL void GL_APIENTRY glBlitFramebufferNV (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
 #endif
+#endif /* GL_NV_framebuffer_blit */
 
-/* GL_NV_framebuffer_multisample */
 #ifndef GL_NV_framebuffer_multisample
 #define GL_NV_framebuffer_multisample 1
+#define GL_RENDERBUFFER_SAMPLES_NV        0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_NV 0x8D56
+#define GL_MAX_SAMPLES_NV                 0x8D57
+typedef void (GL_APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLENVPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 #ifdef GL_GLEXT_PROTOTYPES
-GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleNV ( GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-#endif
-typedef void (GL_APIENTRYP PFNRENDERBUFFERSTORAGEMULTISAMPLENVPROC) ( GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GL_APICALL void GL_APIENTRY glRenderbufferStorageMultisampleNV (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 #endif
+#endif /* GL_NV_framebuffer_multisample */
 
-/* GL_NV_generate_mipmap_sRGB */
 #ifndef GL_NV_generate_mipmap_sRGB
 #define GL_NV_generate_mipmap_sRGB 1
-#endif
+#endif /* GL_NV_generate_mipmap_sRGB */
 
-/* GL_NV_instanced_arrays */
 #ifndef GL_NV_instanced_arrays
 #define GL_NV_instanced_arrays 1
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_NV 0x88FE
+typedef void (GL_APIENTRYP PFNGLVERTEXATTRIBDIVISORNVPROC) (GLuint index, GLuint divisor);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glVertexAttribDivisorNV (GLuint index, GLuint divisor);
 #endif
-typedef void (GL_APIENTRYP PFNVERTEXATTRIBDIVISORNVPROC) (GLuint index, GLuint divisor);
+#endif /* GL_NV_instanced_arrays */
+
+#ifndef GL_NV_non_square_matrices
+#define GL_NV_non_square_matrices 1
+#define GL_FLOAT_MAT2x3_NV                0x8B65
+#define GL_FLOAT_MAT2x4_NV                0x8B66
+#define GL_FLOAT_MAT3x2_NV                0x8B67
+#define GL_FLOAT_MAT3x4_NV                0x8B68
+#define GL_FLOAT_MAT4x2_NV                0x8B69
+#define GL_FLOAT_MAT4x3_NV                0x8B6A
+typedef void (GL_APIENTRYP PFNGLUNIFORMMATRIX2X3FVNVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLUNIFORMMATRIX3X2FVNVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLUNIFORMMATRIX2X4FVNVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLUNIFORMMATRIX4X2FVNVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLUNIFORMMATRIX3X4FVNVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (GL_APIENTRYP PFNGLUNIFORMMATRIX4X3FVNVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+#ifdef GL_GLEXT_PROTOTYPES
+GL_APICALL void GL_APIENTRY glUniformMatrix2x3fvNV (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glUniformMatrix3x2fvNV (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glUniformMatrix2x4fvNV (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glUniformMatrix4x2fvNV (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glUniformMatrix3x4fvNV (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GL_APICALL void GL_APIENTRY glUniformMatrix4x3fvNV (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
 #endif
+#endif /* GL_NV_non_square_matrices */
 
-/* GL_NV_read_buffer */
 #ifndef GL_NV_read_buffer
 #define GL_NV_read_buffer 1
+#define GL_READ_BUFFER_NV                 0x0C02
+typedef void (GL_APIENTRYP PFNGLREADBUFFERNVPROC) (GLenum mode);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glReadBufferNV (GLenum mode);
 #endif
-typedef void (GL_APIENTRYP PFNGLREADBUFFERNVPROC) (GLenum mode);
-#endif
+#endif /* GL_NV_read_buffer */
 
-/* GL_NV_read_buffer_front */
 #ifndef GL_NV_read_buffer_front
 #define GL_NV_read_buffer_front 1
-#endif
+#endif /* GL_NV_read_buffer_front */
 
-/* GL_NV_read_depth */
 #ifndef GL_NV_read_depth
 #define GL_NV_read_depth 1
-#endif
+#endif /* GL_NV_read_depth */
 
-/* GL_NV_read_depth_stencil */
 #ifndef GL_NV_read_depth_stencil
 #define GL_NV_read_depth_stencil 1
-#endif
+#endif /* GL_NV_read_depth_stencil */
 
-/* GL_NV_read_stencil */
 #ifndef GL_NV_read_stencil
 #define GL_NV_read_stencil 1
-#endif
+#endif /* GL_NV_read_stencil */
+
+#ifndef GL_NV_sRGB_formats
+#define GL_NV_sRGB_formats 1
+#define GL_SLUMINANCE_NV                  0x8C46
+#define GL_SLUMINANCE_ALPHA_NV            0x8C44
+#define GL_SRGB8_NV                       0x8C41
+#define GL_SLUMINANCE8_NV                 0x8C47
+#define GL_SLUMINANCE8_ALPHA8_NV          0x8C45
+#define GL_COMPRESSED_SRGB_S3TC_DXT1_NV   0x8C4C
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT1_NV 0x8C4D
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT3_NV 0x8C4E
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT5_NV 0x8C4F
+#define GL_ETC1_SRGB8_NV                  0x88EE
+#endif /* GL_NV_sRGB_formats */
 
-/* GL_NV_shadow_samplers_array */
 #ifndef GL_NV_shadow_samplers_array
 #define GL_NV_shadow_samplers_array 1
-#endif
+#define GL_SAMPLER_2D_ARRAY_SHADOW_NV     0x8DC4
+#endif /* GL_NV_shadow_samplers_array */
 
-/* GL_NV_shadow_samplers_cube */
 #ifndef GL_NV_shadow_samplers_cube
 #define GL_NV_shadow_samplers_cube 1
-#endif
+#define GL_SAMPLER_CUBE_SHADOW_NV         0x8DC5
+#endif /* GL_NV_shadow_samplers_cube */
 
-/* GL_NV_sRGB_formats */
-#ifndef GL_NV_sRGB_formats
-#define GL_NV_sRGB_formats 1
-#endif
-
-/* GL_NV_texture_border_clamp */
 #ifndef GL_NV_texture_border_clamp
 #define GL_NV_texture_border_clamp 1
-#endif
+#define GL_TEXTURE_BORDER_COLOR_NV        0x1004
+#define GL_CLAMP_TO_BORDER_NV             0x812D
+#endif /* GL_NV_texture_border_clamp */
 
-/* GL_NV_texture_compression_s3tc_update */
 #ifndef GL_NV_texture_compression_s3tc_update
 #define GL_NV_texture_compression_s3tc_update 1
-#endif
+#endif /* GL_NV_texture_compression_s3tc_update */
 
-/* GL_NV_texture_npot_2D_mipmap */
 #ifndef GL_NV_texture_npot_2D_mipmap
 #define GL_NV_texture_npot_2D_mipmap 1
-#endif
-
-/*------------------------------------------------------------------------*
- * QCOM extension functions
- *------------------------------------------------------------------------*/
+#endif /* GL_NV_texture_npot_2D_mipmap */
 
-/* GL_QCOM_alpha_test */
 #ifndef GL_QCOM_alpha_test
 #define GL_QCOM_alpha_test 1
+#define GL_ALPHA_TEST_QCOM                0x0BC0
+#define GL_ALPHA_TEST_FUNC_QCOM           0x0BC1
+#define GL_ALPHA_TEST_REF_QCOM            0x0BC2
+typedef void (GL_APIENTRYP PFNGLALPHAFUNCQCOMPROC) (GLenum func, GLclampf ref);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glAlphaFuncQCOM (GLenum func, GLclampf ref);
 #endif
-typedef void (GL_APIENTRYP PFNGLALPHAFUNCQCOMPROC) (GLenum func, GLclampf ref);
-#endif
+#endif /* GL_QCOM_alpha_test */
 
-/* GL_QCOM_binning_control */
 #ifndef GL_QCOM_binning_control
 #define GL_QCOM_binning_control 1
-#endif
+#define GL_BINNING_CONTROL_HINT_QCOM      0x8FB0
+#define GL_CPU_OPTIMIZED_QCOM             0x8FB1
+#define GL_GPU_OPTIMIZED_QCOM             0x8FB2
+#define GL_RENDER_DIRECT_TO_FRAMEBUFFER_QCOM 0x8FB3
+#endif /* GL_QCOM_binning_control */
 
-/* GL_QCOM_driver_control */
 #ifndef GL_QCOM_driver_control
 #define GL_QCOM_driver_control 1
+typedef void (GL_APIENTRYP PFNGLGETDRIVERCONTROLSQCOMPROC) (GLint *num, GLsizei size, GLuint *driverControls);
+typedef void (GL_APIENTRYP PFNGLGETDRIVERCONTROLSTRINGQCOMPROC) (GLuint driverControl, GLsizei bufSize, GLsizei *length, GLchar *driverControlString);
+typedef void (GL_APIENTRYP PFNGLENABLEDRIVERCONTROLQCOMPROC) (GLuint driverControl);
+typedef void (GL_APIENTRYP PFNGLDISABLEDRIVERCONTROLQCOMPROC) (GLuint driverControl);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glGetDriverControlsQCOM (GLint *num, GLsizei size, GLuint *driverControls);
 GL_APICALL void GL_APIENTRY glGetDriverControlStringQCOM (GLuint driverControl, GLsizei bufSize, GLsizei *length, GLchar *driverControlString);
 GL_APICALL void GL_APIENTRY glEnableDriverControlQCOM (GLuint driverControl);
 GL_APICALL void GL_APIENTRY glDisableDriverControlQCOM (GLuint driverControl);
 #endif
-typedef void (GL_APIENTRYP PFNGLGETDRIVERCONTROLSQCOMPROC) (GLint *num, GLsizei size, GLuint *driverControls);
-typedef void (GL_APIENTRYP PFNGLGETDRIVERCONTROLSTRINGQCOMPROC) (GLuint driverControl, GLsizei bufSize, GLsizei *length, GLchar *driverControlString);
-typedef void (GL_APIENTRYP PFNGLENABLEDRIVERCONTROLQCOMPROC) (GLuint driverControl);
-typedef void (GL_APIENTRYP PFNGLDISABLEDRIVERCONTROLQCOMPROC) (GLuint driverControl);
-#endif
+#endif /* GL_QCOM_driver_control */
 
-/* GL_QCOM_extended_get */
 #ifndef GL_QCOM_extended_get
 #define GL_QCOM_extended_get 1
+#define GL_TEXTURE_WIDTH_QCOM             0x8BD2
+#define GL_TEXTURE_HEIGHT_QCOM            0x8BD3
+#define GL_TEXTURE_DEPTH_QCOM             0x8BD4
+#define GL_TEXTURE_INTERNAL_FORMAT_QCOM   0x8BD5
+#define GL_TEXTURE_FORMAT_QCOM            0x8BD6
+#define GL_TEXTURE_TYPE_QCOM              0x8BD7
+#define GL_TEXTURE_IMAGE_VALID_QCOM       0x8BD8
+#define GL_TEXTURE_NUM_LEVELS_QCOM        0x8BD9
+#define GL_TEXTURE_TARGET_QCOM            0x8BDA
+#define GL_TEXTURE_OBJECT_VALID_QCOM      0x8BDB
+#define GL_STATE_RESTORE                  0x8BDC
+typedef void (GL_APIENTRYP PFNGLEXTGETTEXTURESQCOMPROC) (GLuint *textures, GLint maxTextures, GLint *numTextures);
+typedef void (GL_APIENTRYP PFNGLEXTGETBUFFERSQCOMPROC) (GLuint *buffers, GLint maxBuffers, GLint *numBuffers);
+typedef void (GL_APIENTRYP PFNGLEXTGETRENDERBUFFERSQCOMPROC) (GLuint *renderbuffers, GLint maxRenderbuffers, GLint *numRenderbuffers);
+typedef void (GL_APIENTRYP PFNGLEXTGETFRAMEBUFFERSQCOMPROC) (GLuint *framebuffers, GLint maxFramebuffers, GLint *numFramebuffers);
+typedef void (GL_APIENTRYP PFNGLEXTGETTEXLEVELPARAMETERIVQCOMPROC) (GLuint texture, GLenum face, GLint level, GLenum pname, GLint *params);
+typedef void (GL_APIENTRYP PFNGLEXTTEXOBJECTSTATEOVERRIDEIQCOMPROC) (GLenum target, GLenum pname, GLint param);
+typedef void (GL_APIENTRYP PFNGLEXTGETTEXSUBIMAGEQCOMPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, void *texels);
+typedef void (GL_APIENTRYP PFNGLEXTGETBUFFERPOINTERVQCOMPROC) (GLenum target, void **params);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glExtGetTexturesQCOM (GLuint *textures, GLint maxTextures, GLint *numTextures);
 GL_APICALL void GL_APIENTRY glExtGetBuffersQCOM (GLuint *buffers, GLint maxBuffers, GLint *numBuffers);
@@ -1907,66 +1922,84 @@ GL_APICALL void GL_APIENTRY glExtGetRenderbuffersQCOM (GLuint *renderbuffers, GL
 GL_APICALL void GL_APIENTRY glExtGetFramebuffersQCOM (GLuint *framebuffers, GLint maxFramebuffers, GLint *numFramebuffers);
 GL_APICALL void GL_APIENTRY glExtGetTexLevelParameterivQCOM (GLuint texture, GLenum face, GLint level, GLenum pname, GLint *params);
 GL_APICALL void GL_APIENTRY glExtTexObjectStateOverrideiQCOM (GLenum target, GLenum pname, GLint param);
-GL_APICALL void GL_APIENTRY glExtGetTexSubImageQCOM (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, GLvoid *texels);
-GL_APICALL void GL_APIENTRY glExtGetBufferPointervQCOM (GLenum target, GLvoid **params);
-#endif
-typedef void (GL_APIENTRYP PFNGLEXTGETTEXTURESQCOMPROC) (GLuint *textures, GLint maxTextures, GLint *numTextures);
-typedef void (GL_APIENTRYP PFNGLEXTGETBUFFERSQCOMPROC) (GLuint *buffers, GLint maxBuffers, GLint *numBuffers);
-typedef void (GL_APIENTRYP PFNGLEXTGETRENDERBUFFERSQCOMPROC) (GLuint *renderbuffers, GLint maxRenderbuffers, GLint *numRenderbuffers);
-typedef void (GL_APIENTRYP PFNGLEXTGETFRAMEBUFFERSQCOMPROC) (GLuint *framebuffers, GLint maxFramebuffers, GLint *numFramebuffers);
-typedef void (GL_APIENTRYP PFNGLEXTGETTEXLEVELPARAMETERIVQCOMPROC) (GLuint texture, GLenum face, GLint level, GLenum pname, GLint *params);
-typedef void (GL_APIENTRYP PFNGLEXTTEXOBJECTSTATEOVERRIDEIQCOMPROC) (GLenum target, GLenum pname, GLint param);
-typedef void (GL_APIENTRYP PFNGLEXTGETTEXSUBIMAGEQCOMPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, GLvoid *texels);
-typedef void (GL_APIENTRYP PFNGLEXTGETBUFFERPOINTERVQCOMPROC) (GLenum target, GLvoid **params);
+GL_APICALL void GL_APIENTRY glExtGetTexSubImageQCOM (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, void *texels);
+GL_APICALL void GL_APIENTRY glExtGetBufferPointervQCOM (GLenum target, void **params);
 #endif
+#endif /* GL_QCOM_extended_get */
 
-/* GL_QCOM_extended_get2 */
 #ifndef GL_QCOM_extended_get2
 #define GL_QCOM_extended_get2 1
+typedef void (GL_APIENTRYP PFNGLEXTGETSHADERSQCOMPROC) (GLuint *shaders, GLint maxShaders, GLint *numShaders);
+typedef void (GL_APIENTRYP PFNGLEXTGETPROGRAMSQCOMPROC) (GLuint *programs, GLint maxPrograms, GLint *numPrograms);
+typedef GLboolean (GL_APIENTRYP PFNGLEXTISPROGRAMBINARYQCOMPROC) (GLuint program);
+typedef void (GL_APIENTRYP PFNGLEXTGETPROGRAMBINARYSOURCEQCOMPROC) (GLuint program, GLenum shadertype, GLchar *source, GLint *length);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glExtGetShadersQCOM (GLuint *shaders, GLint maxShaders, GLint *numShaders);
 GL_APICALL void GL_APIENTRY glExtGetProgramsQCOM (GLuint *programs, GLint maxPrograms, GLint *numPrograms);
 GL_APICALL GLboolean GL_APIENTRY glExtIsProgramBinaryQCOM (GLuint program);
 GL_APICALL void GL_APIENTRY glExtGetProgramBinarySourceQCOM (GLuint program, GLenum shadertype, GLchar *source, GLint *length);
 #endif
-typedef void (GL_APIENTRYP PFNGLEXTGETSHADERSQCOMPROC) (GLuint *shaders, GLint maxShaders, GLint *numShaders);
-typedef void (GL_APIENTRYP PFNGLEXTGETPROGRAMSQCOMPROC) (GLuint *programs, GLint maxPrograms, GLint *numPrograms);
-typedef GLboolean (GL_APIENTRYP PFNGLEXTISPROGRAMBINARYQCOMPROC) (GLuint program);
-typedef void (GL_APIENTRYP PFNGLEXTGETPROGRAMBINARYSOURCEQCOMPROC) (GLuint program, GLenum shadertype, GLchar *source, GLint *length);
-#endif
+#endif /* GL_QCOM_extended_get2 */
 
-/* GL_QCOM_perfmon_global_mode */
 #ifndef GL_QCOM_perfmon_global_mode
 #define GL_QCOM_perfmon_global_mode 1
-#endif
+#define GL_PERFMON_GLOBAL_MODE_QCOM       0x8FA0
+#endif /* GL_QCOM_perfmon_global_mode */
 
-/* GL_QCOM_writeonly_rendering */
-#ifndef GL_QCOM_writeonly_rendering
-#define GL_QCOM_writeonly_rendering 1
-#endif
-
-/* GL_QCOM_tiled_rendering */
 #ifndef GL_QCOM_tiled_rendering
 #define GL_QCOM_tiled_rendering 1
+#define GL_COLOR_BUFFER_BIT0_QCOM         0x00000001
+#define GL_COLOR_BUFFER_BIT1_QCOM         0x00000002
+#define GL_COLOR_BUFFER_BIT2_QCOM         0x00000004
+#define GL_COLOR_BUFFER_BIT3_QCOM         0x00000008
+#define GL_COLOR_BUFFER_BIT4_QCOM         0x00000010
+#define GL_COLOR_BUFFER_BIT5_QCOM         0x00000020
+#define GL_COLOR_BUFFER_BIT6_QCOM         0x00000040
+#define GL_COLOR_BUFFER_BIT7_QCOM         0x00000080
+#define GL_DEPTH_BUFFER_BIT0_QCOM         0x00000100
+#define GL_DEPTH_BUFFER_BIT1_QCOM         0x00000200
+#define GL_DEPTH_BUFFER_BIT2_QCOM         0x00000400
+#define GL_DEPTH_BUFFER_BIT3_QCOM         0x00000800
+#define GL_DEPTH_BUFFER_BIT4_QCOM         0x00001000
+#define GL_DEPTH_BUFFER_BIT5_QCOM         0x00002000
+#define GL_DEPTH_BUFFER_BIT6_QCOM         0x00004000
+#define GL_DEPTH_BUFFER_BIT7_QCOM         0x00008000
+#define GL_STENCIL_BUFFER_BIT0_QCOM       0x00010000
+#define GL_STENCIL_BUFFER_BIT1_QCOM       0x00020000
+#define GL_STENCIL_BUFFER_BIT2_QCOM       0x00040000
+#define GL_STENCIL_BUFFER_BIT3_QCOM       0x00080000
+#define GL_STENCIL_BUFFER_BIT4_QCOM       0x00100000
+#define GL_STENCIL_BUFFER_BIT5_QCOM       0x00200000
+#define GL_STENCIL_BUFFER_BIT6_QCOM       0x00400000
+#define GL_STENCIL_BUFFER_BIT7_QCOM       0x00800000
+#define GL_MULTISAMPLE_BUFFER_BIT0_QCOM   0x01000000
+#define GL_MULTISAMPLE_BUFFER_BIT1_QCOM   0x02000000
+#define GL_MULTISAMPLE_BUFFER_BIT2_QCOM   0x04000000
+#define GL_MULTISAMPLE_BUFFER_BIT3_QCOM   0x08000000
+#define GL_MULTISAMPLE_BUFFER_BIT4_QCOM   0x10000000
+#define GL_MULTISAMPLE_BUFFER_BIT5_QCOM   0x20000000
+#define GL_MULTISAMPLE_BUFFER_BIT6_QCOM   0x40000000
+#define GL_MULTISAMPLE_BUFFER_BIT7_QCOM   0x80000000
+typedef void (GL_APIENTRYP PFNGLSTARTTILINGQCOMPROC) (GLuint x, GLuint y, GLuint width, GLuint height, GLbitfield preserveMask);
+typedef void (GL_APIENTRYP PFNGLENDTILINGQCOMPROC) (GLbitfield preserveMask);
 #ifdef GL_GLEXT_PROTOTYPES
 GL_APICALL void GL_APIENTRY glStartTilingQCOM (GLuint x, GLuint y, GLuint width, GLuint height, GLbitfield preserveMask);
 GL_APICALL void GL_APIENTRY glEndTilingQCOM (GLbitfield preserveMask);
 #endif
-typedef void (GL_APIENTRYP PFNGLSTARTTILINGQCOMPROC) (GLuint x, GLuint y, GLuint width, GLuint height, GLbitfield preserveMask);
-typedef void (GL_APIENTRYP PFNGLENDTILINGQCOMPROC) (GLbitfield preserveMask);
-#endif
+#endif /* GL_QCOM_tiled_rendering */
 
-/*------------------------------------------------------------------------*
- * VIV extension tokens
- *------------------------------------------------------------------------*/
+#ifndef GL_QCOM_writeonly_rendering
+#define GL_QCOM_writeonly_rendering 1
+#define GL_WRITEONLY_RENDERING_QCOM       0x8823
+#endif /* GL_QCOM_writeonly_rendering */
 
-/* GL_VIV_shader_binary */
 #ifndef GL_VIV_shader_binary
 #define GL_VIV_shader_binary 1
-#endif
+#define GL_SHADER_BINARY_VIV              0x8FC4
+#endif /* GL_VIV_shader_binary */
 
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* __gl2ext_h_ */
+#endif
diff --git a/src/gui/opengl/qopenglext.h b/src/gui/opengl/qopenglext.h
index dfdb8249d9..36bad4ce28 100644
--- a/src/gui/opengl/qopenglext.h
+++ b/src/gui/opengl/qopenglext.h
@@ -1,5 +1,5 @@
 #ifndef __glext_h_
-#define __glext_h_
+#define __glext_h_ 1
 
 #if 0
 #pragma qt_no_master_include
@@ -12,7 +12,7 @@ extern "C" {
 #endif
 
 /*
-** Copyright (c) 2007-2012 The Khronos Group Inc.
+** Copyright (c) 2013-2014 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -33,15 +33,19 @@ extern "C" {
 ** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 ** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
 */
-
-/* Header file version number, required by OpenGL ABI for Linux */
-/* glext.h last updated $Date: 2013-02-07 01:42:49 -0800 (Thu, 07 Feb 2013) $ */
-/* Current version at http://www.opengl.org/registry/ */
-#define GL_GLEXT_VERSION 86
-/* Function declaration macros - to move into glplatform.h */
+/*
+** This header is generated from the Khronos OpenGL / OpenGL ES XML
+** API Registry. The current version of the Registry, generator scripts
+** used to make the header, and the header can be found at
+**   http://www.opengl.org/registry/
+**
+** Khronos $Revision: 27684 $ on $Date: 2014-08-11 01:21:35 -0700 (Mon, 11 Aug 2014) $
+*/
 
 #if defined(_WIN32) && !defined(APIENTRY) && !defined(__CYGWIN__) && !defined(__SCITECH_SNAP__)
+#ifndef WIN32_LEAN_AND_MEAN
 #define WIN32_LEAN_AND_MEAN 1
+#endif
 #include <windows.h>
 #endif
 
@@ -55,9 +59,20 @@ extern "C" {
 #define GLAPI extern
 #endif
 
-/*************************************************************/
+#define GL_GLEXT_VERSION 20140810
+
+/* Generated C header for:
+ * API: gl
+ * Profile: compatibility
+ * Versions considered: .*
+ * Versions emitted: 1\.[2-9]|[234]\.[0-9]
+ * Default extensions included: gl
+ * Additional extensions included: _nomatch_^
+ * Extensions removed: _nomatch_^
+ */
 
 #ifndef GL_VERSION_1_2
+#define GL_VERSION_1_2 1
 #define GL_UNSIGNED_BYTE_3_3_2            0x8032
 #define GL_UNSIGNED_SHORT_4_4_4_4         0x8033
 #define GL_UNSIGNED_SHORT_5_5_5_1         0x8034
@@ -99,87 +114,20 @@ extern "C" {
 #define GL_SINGLE_COLOR                   0x81F9
 #define GL_SEPARATE_SPECULAR_COLOR        0x81FA
 #define GL_ALIASED_POINT_SIZE_RANGE       0x846D
+typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const void *indices);
+typedef void (APIENTRYP PFNGLTEXIMAGE3DPROC) (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawRangeElements (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const void *indices);
+GLAPI void APIENTRY glTexImage3D (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glCopyTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
 #endif
-
-#ifndef GL_ARB_imaging
-#define GL_CONSTANT_COLOR                 0x8001
-#define GL_ONE_MINUS_CONSTANT_COLOR       0x8002
-#define GL_CONSTANT_ALPHA                 0x8003
-#define GL_ONE_MINUS_CONSTANT_ALPHA       0x8004
-#define GL_BLEND_COLOR                    0x8005
-#define GL_FUNC_ADD                       0x8006
-#define GL_MIN                            0x8007
-#define GL_MAX                            0x8008
-#define GL_BLEND_EQUATION                 0x8009
-#define GL_FUNC_SUBTRACT                  0x800A
-#define GL_FUNC_REVERSE_SUBTRACT          0x800B
-#define GL_CONVOLUTION_1D                 0x8010
-#define GL_CONVOLUTION_2D                 0x8011
-#define GL_SEPARABLE_2D                   0x8012
-#define GL_CONVOLUTION_BORDER_MODE        0x8013
-#define GL_CONVOLUTION_FILTER_SCALE       0x8014
-#define GL_CONVOLUTION_FILTER_BIAS        0x8015
-#define GL_REDUCE                         0x8016
-#define GL_CONVOLUTION_FORMAT             0x8017
-#define GL_CONVOLUTION_WIDTH              0x8018
-#define GL_CONVOLUTION_HEIGHT             0x8019
-#define GL_MAX_CONVOLUTION_WIDTH          0x801A
-#define GL_MAX_CONVOLUTION_HEIGHT         0x801B
-#define GL_POST_CONVOLUTION_RED_SCALE     0x801C
-#define GL_POST_CONVOLUTION_GREEN_SCALE   0x801D
-#define GL_POST_CONVOLUTION_BLUE_SCALE    0x801E
-#define GL_POST_CONVOLUTION_ALPHA_SCALE   0x801F
-#define GL_POST_CONVOLUTION_RED_BIAS      0x8020
-#define GL_POST_CONVOLUTION_GREEN_BIAS    0x8021
-#define GL_POST_CONVOLUTION_BLUE_BIAS     0x8022
-#define GL_POST_CONVOLUTION_ALPHA_BIAS    0x8023
-#define GL_HISTOGRAM                      0x8024
-#define GL_PROXY_HISTOGRAM                0x8025
-#define GL_HISTOGRAM_WIDTH                0x8026
-#define GL_HISTOGRAM_FORMAT               0x8027
-#define GL_HISTOGRAM_RED_SIZE             0x8028
-#define GL_HISTOGRAM_GREEN_SIZE           0x8029
-#define GL_HISTOGRAM_BLUE_SIZE            0x802A
-#define GL_HISTOGRAM_ALPHA_SIZE           0x802B
-#define GL_HISTOGRAM_LUMINANCE_SIZE       0x802C
-#define GL_HISTOGRAM_SINK                 0x802D
-#define GL_MINMAX                         0x802E
-#define GL_MINMAX_FORMAT                  0x802F
-#define GL_MINMAX_SINK                    0x8030
-#define GL_TABLE_TOO_LARGE                0x8031
-#define GL_COLOR_MATRIX                   0x80B1
-#define GL_COLOR_MATRIX_STACK_DEPTH       0x80B2
-#define GL_MAX_COLOR_MATRIX_STACK_DEPTH   0x80B3
-#define GL_POST_COLOR_MATRIX_RED_SCALE    0x80B4
-#define GL_POST_COLOR_MATRIX_GREEN_SCALE  0x80B5
-#define GL_POST_COLOR_MATRIX_BLUE_SCALE   0x80B6
-#define GL_POST_COLOR_MATRIX_ALPHA_SCALE  0x80B7
-#define GL_POST_COLOR_MATRIX_RED_BIAS     0x80B8
-#define GL_POST_COLOR_MATRIX_GREEN_BIAS   0x80B9
-#define GL_POST_COLOR_MATRIX_BLUE_BIAS    0x80BA
-#define GL_POST_COLOR_MATRIX_ALPHA_BIAS   0x80BB
-#define GL_COLOR_TABLE                    0x80D0
-#define GL_POST_CONVOLUTION_COLOR_TABLE   0x80D1
-#define GL_POST_COLOR_MATRIX_COLOR_TABLE  0x80D2
-#define GL_PROXY_COLOR_TABLE              0x80D3
-#define GL_PROXY_POST_CONVOLUTION_COLOR_TABLE 0x80D4
-#define GL_PROXY_POST_COLOR_MATRIX_COLOR_TABLE 0x80D5
-#define GL_COLOR_TABLE_SCALE              0x80D6
-#define GL_COLOR_TABLE_BIAS               0x80D7
-#define GL_COLOR_TABLE_FORMAT             0x80D8
-#define GL_COLOR_TABLE_WIDTH              0x80D9
-#define GL_COLOR_TABLE_RED_SIZE           0x80DA
-#define GL_COLOR_TABLE_GREEN_SIZE         0x80DB
-#define GL_COLOR_TABLE_BLUE_SIZE          0x80DC
-#define GL_COLOR_TABLE_ALPHA_SIZE         0x80DD
-#define GL_COLOR_TABLE_LUMINANCE_SIZE     0x80DE
-#define GL_COLOR_TABLE_INTENSITY_SIZE     0x80DF
-#define GL_CONSTANT_BORDER                0x8151
-#define GL_REPLICATE_BORDER               0x8153
-#define GL_CONVOLUTION_BORDER_COLOR       0x8154
-#endif
+#endif /* GL_VERSION_1_2 */
 
 #ifndef GL_VERSION_1_3
+#define GL_VERSION_1_3 1
 #define GL_TEXTURE0                       0x84C0
 #define GL_TEXTURE1                       0x84C1
 #define GL_TEXTURE2                       0x84C2
@@ -276,9 +224,104 @@ extern "C" {
 #define GL_PREVIOUS                       0x8578
 #define GL_DOT3_RGB                       0x86AE
 #define GL_DOT3_RGBA                      0x86AF
+typedef void (APIENTRYP PFNGLACTIVETEXTUREPROC) (GLenum texture);
+typedef void (APIENTRYP PFNGLSAMPLECOVERAGEPROC) (GLfloat value, GLboolean invert);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE2DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE1DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE2DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE1DPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXIMAGEPROC) (GLenum target, GLint level, void *img);
+typedef void (APIENTRYP PFNGLCLIENTACTIVETEXTUREPROC) (GLenum texture);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1DPROC) (GLenum target, GLdouble s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1DVPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1FPROC) (GLenum target, GLfloat s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1FVPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1IPROC) (GLenum target, GLint s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1IVPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1SPROC) (GLenum target, GLshort s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1SVPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2DPROC) (GLenum target, GLdouble s, GLdouble t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2DVPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2FPROC) (GLenum target, GLfloat s, GLfloat t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2FVPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2IPROC) (GLenum target, GLint s, GLint t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2IVPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2SPROC) (GLenum target, GLshort s, GLshort t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2SVPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3DPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3DVPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3FPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3FVPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3IPROC) (GLenum target, GLint s, GLint t, GLint r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3IVPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3SPROC) (GLenum target, GLshort s, GLshort t, GLshort r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3SVPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4DPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4DVPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4FPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4FVPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4IPROC) (GLenum target, GLint s, GLint t, GLint r, GLint q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4IVPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4SPROC) (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4SVPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXFPROC) (const GLfloat *m);
+typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXDPROC) (const GLdouble *m);
+typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXFPROC) (const GLfloat *m);
+typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXDPROC) (const GLdouble *m);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glActiveTexture (GLenum texture);
+GLAPI void APIENTRY glSampleCoverage (GLfloat value, GLboolean invert);
+GLAPI void APIENTRY glCompressedTexImage3D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexImage2D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexImage1D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexSubImage2D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexSubImage1D (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glGetCompressedTexImage (GLenum target, GLint level, void *img);
+GLAPI void APIENTRY glClientActiveTexture (GLenum texture);
+GLAPI void APIENTRY glMultiTexCoord1d (GLenum target, GLdouble s);
+GLAPI void APIENTRY glMultiTexCoord1dv (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord1f (GLenum target, GLfloat s);
+GLAPI void APIENTRY glMultiTexCoord1fv (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord1i (GLenum target, GLint s);
+GLAPI void APIENTRY glMultiTexCoord1iv (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord1s (GLenum target, GLshort s);
+GLAPI void APIENTRY glMultiTexCoord1sv (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glMultiTexCoord2d (GLenum target, GLdouble s, GLdouble t);
+GLAPI void APIENTRY glMultiTexCoord2dv (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord2f (GLenum target, GLfloat s, GLfloat t);
+GLAPI void APIENTRY glMultiTexCoord2fv (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord2i (GLenum target, GLint s, GLint t);
+GLAPI void APIENTRY glMultiTexCoord2iv (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord2s (GLenum target, GLshort s, GLshort t);
+GLAPI void APIENTRY glMultiTexCoord2sv (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glMultiTexCoord3d (GLenum target, GLdouble s, GLdouble t, GLdouble r);
+GLAPI void APIENTRY glMultiTexCoord3dv (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord3f (GLenum target, GLfloat s, GLfloat t, GLfloat r);
+GLAPI void APIENTRY glMultiTexCoord3fv (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord3i (GLenum target, GLint s, GLint t, GLint r);
+GLAPI void APIENTRY glMultiTexCoord3iv (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord3s (GLenum target, GLshort s, GLshort t, GLshort r);
+GLAPI void APIENTRY glMultiTexCoord3sv (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glMultiTexCoord4d (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
+GLAPI void APIENTRY glMultiTexCoord4dv (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord4f (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
+GLAPI void APIENTRY glMultiTexCoord4fv (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord4i (GLenum target, GLint s, GLint t, GLint r, GLint q);
+GLAPI void APIENTRY glMultiTexCoord4iv (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord4s (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
+GLAPI void APIENTRY glMultiTexCoord4sv (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glLoadTransposeMatrixf (const GLfloat *m);
+GLAPI void APIENTRY glLoadTransposeMatrixd (const GLdouble *m);
+GLAPI void APIENTRY glMultTransposeMatrixf (const GLfloat *m);
+GLAPI void APIENTRY glMultTransposeMatrixd (const GLdouble *m);
 #endif
+#endif /* GL_VERSION_1_3 */
 
 #ifndef GL_VERSION_1_4
+#define GL_VERSION_1_4 1
 #define GL_BLEND_DST_RGB                  0x80C8
 #define GL_BLEND_SRC_RGB                  0x80C9
 #define GL_BLEND_DST_ALPHA                0x80CA
@@ -318,9 +361,118 @@ extern "C" {
 #define GL_TEXTURE_FILTER_CONTROL         0x8500
 #define GL_DEPTH_TEXTURE_MODE             0x884B
 #define GL_COMPARE_R_TO_TEXTURE           0x884E
+#define GL_FUNC_ADD                       0x8006
+#define GL_FUNC_SUBTRACT                  0x800A
+#define GL_FUNC_REVERSE_SUBTRACT          0x800B
+#define GL_MIN                            0x8007
+#define GL_MAX                            0x8008
+#define GL_CONSTANT_COLOR                 0x8001
+#define GL_ONE_MINUS_CONSTANT_COLOR       0x8002
+#define GL_CONSTANT_ALPHA                 0x8003
+#define GL_ONE_MINUS_CONSTANT_ALPHA       0x8004
+typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei drawcount);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSPROC) (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei drawcount);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFVPROC) (GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERIPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERIVPROC) (GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLFOGCOORDFPROC) (GLfloat coord);
+typedef void (APIENTRYP PFNGLFOGCOORDFVPROC) (const GLfloat *coord);
+typedef void (APIENTRYP PFNGLFOGCOORDDPROC) (GLdouble coord);
+typedef void (APIENTRYP PFNGLFOGCOORDDVPROC) (const GLdouble *coord);
+typedef void (APIENTRYP PFNGLFOGCOORDPOINTERPROC) (GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BPROC) (GLbyte red, GLbyte green, GLbyte blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BVPROC) (const GLbyte *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DPROC) (GLdouble red, GLdouble green, GLdouble blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DVPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FPROC) (GLfloat red, GLfloat green, GLfloat blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FVPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IPROC) (GLint red, GLint green, GLint blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IVPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SPROC) (GLshort red, GLshort green, GLshort blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SVPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBPROC) (GLubyte red, GLubyte green, GLubyte blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBVPROC) (const GLubyte *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIPROC) (GLuint red, GLuint green, GLuint blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIVPROC) (const GLuint *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USPROC) (GLushort red, GLushort green, GLushort blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USVPROC) (const GLushort *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTERPROC) (GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLWINDOWPOS2DPROC) (GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2DVPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2FPROC) (GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2FVPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2IPROC) (GLint x, GLint y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2IVPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2SPROC) (GLshort x, GLshort y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2SVPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3DPROC) (GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3DVPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3FPROC) (GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3FVPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3IPROC) (GLint x, GLint y, GLint z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3IVPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3SPROC) (GLshort x, GLshort y, GLshort z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3SVPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLBLENDCOLORPROC) (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
+typedef void (APIENTRYP PFNGLBLENDEQUATIONPROC) (GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendFuncSeparate (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
+GLAPI void APIENTRY glMultiDrawArrays (GLenum mode, const GLint *first, const GLsizei *count, GLsizei drawcount);
+GLAPI void APIENTRY glMultiDrawElements (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei drawcount);
+GLAPI void APIENTRY glPointParameterf (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glPointParameterfv (GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glPointParameteri (GLenum pname, GLint param);
+GLAPI void APIENTRY glPointParameteriv (GLenum pname, const GLint *params);
+GLAPI void APIENTRY glFogCoordf (GLfloat coord);
+GLAPI void APIENTRY glFogCoordfv (const GLfloat *coord);
+GLAPI void APIENTRY glFogCoordd (GLdouble coord);
+GLAPI void APIENTRY glFogCoorddv (const GLdouble *coord);
+GLAPI void APIENTRY glFogCoordPointer (GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glSecondaryColor3b (GLbyte red, GLbyte green, GLbyte blue);
+GLAPI void APIENTRY glSecondaryColor3bv (const GLbyte *v);
+GLAPI void APIENTRY glSecondaryColor3d (GLdouble red, GLdouble green, GLdouble blue);
+GLAPI void APIENTRY glSecondaryColor3dv (const GLdouble *v);
+GLAPI void APIENTRY glSecondaryColor3f (GLfloat red, GLfloat green, GLfloat blue);
+GLAPI void APIENTRY glSecondaryColor3fv (const GLfloat *v);
+GLAPI void APIENTRY glSecondaryColor3i (GLint red, GLint green, GLint blue);
+GLAPI void APIENTRY glSecondaryColor3iv (const GLint *v);
+GLAPI void APIENTRY glSecondaryColor3s (GLshort red, GLshort green, GLshort blue);
+GLAPI void APIENTRY glSecondaryColor3sv (const GLshort *v);
+GLAPI void APIENTRY glSecondaryColor3ub (GLubyte red, GLubyte green, GLubyte blue);
+GLAPI void APIENTRY glSecondaryColor3ubv (const GLubyte *v);
+GLAPI void APIENTRY glSecondaryColor3ui (GLuint red, GLuint green, GLuint blue);
+GLAPI void APIENTRY glSecondaryColor3uiv (const GLuint *v);
+GLAPI void APIENTRY glSecondaryColor3us (GLushort red, GLushort green, GLushort blue);
+GLAPI void APIENTRY glSecondaryColor3usv (const GLushort *v);
+GLAPI void APIENTRY glSecondaryColorPointer (GLint size, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glWindowPos2d (GLdouble x, GLdouble y);
+GLAPI void APIENTRY glWindowPos2dv (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos2f (GLfloat x, GLfloat y);
+GLAPI void APIENTRY glWindowPos2fv (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos2i (GLint x, GLint y);
+GLAPI void APIENTRY glWindowPos2iv (const GLint *v);
+GLAPI void APIENTRY glWindowPos2s (GLshort x, GLshort y);
+GLAPI void APIENTRY glWindowPos2sv (const GLshort *v);
+GLAPI void APIENTRY glWindowPos3d (GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glWindowPos3dv (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos3f (GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glWindowPos3fv (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos3i (GLint x, GLint y, GLint z);
+GLAPI void APIENTRY glWindowPos3iv (const GLint *v);
+GLAPI void APIENTRY glWindowPos3s (GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glWindowPos3sv (const GLshort *v);
+GLAPI void APIENTRY glBlendColor (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
+GLAPI void APIENTRY glBlendEquation (GLenum mode);
 #endif
+#endif /* GL_VERSION_1_4 */
 
 #ifndef GL_VERSION_1_5
+#define GL_VERSION_1_5 1
+#include <stddef.h>
+typedef ptrdiff_t GLsizeiptr;
+typedef ptrdiff_t GLintptr;
 #define GL_BUFFER_SIZE                    0x8764
 #define GL_BUFFER_USAGE                   0x8765
 #define GL_QUERY_COUNTER_BITS             0x8864
@@ -371,9 +523,51 @@ extern "C" {
 #define GL_SRC2_RGB                       0x8582
 #define GL_SRC0_ALPHA                     0x8588
 #define GL_SRC2_ALPHA                     0x858A
+typedef void (APIENTRYP PFNGLGENQUERIESPROC) (GLsizei n, GLuint *ids);
+typedef void (APIENTRYP PFNGLDELETEQUERIESPROC) (GLsizei n, const GLuint *ids);
+typedef GLboolean (APIENTRYP PFNGLISQUERYPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLBEGINQUERYPROC) (GLenum target, GLuint id);
+typedef void (APIENTRYP PFNGLENDQUERYPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLGETQUERYIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTIVPROC) (GLuint id, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTUIVPROC) (GLuint id, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLBINDBUFFERPROC) (GLenum target, GLuint buffer);
+typedef void (APIENTRYP PFNGLDELETEBUFFERSPROC) (GLsizei n, const GLuint *buffers);
+typedef void (APIENTRYP PFNGLGENBUFFERSPROC) (GLsizei n, GLuint *buffers);
+typedef GLboolean (APIENTRYP PFNGLISBUFFERPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLBUFFERDATAPROC) (GLenum target, GLsizeiptr size, const void *data, GLenum usage);
+typedef void (APIENTRYP PFNGLBUFFERSUBDATAPROC) (GLenum target, GLintptr offset, GLsizeiptr size, const void *data);
+typedef void (APIENTRYP PFNGLGETBUFFERSUBDATAPROC) (GLenum target, GLintptr offset, GLsizeiptr size, void *data);
+typedef void *(APIENTRYP PFNGLMAPBUFFERPROC) (GLenum target, GLenum access);
+typedef GLboolean (APIENTRYP PFNGLUNMAPBUFFERPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETBUFFERPOINTERVPROC) (GLenum target, GLenum pname, void **params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGenQueries (GLsizei n, GLuint *ids);
+GLAPI void APIENTRY glDeleteQueries (GLsizei n, const GLuint *ids);
+GLAPI GLboolean APIENTRY glIsQuery (GLuint id);
+GLAPI void APIENTRY glBeginQuery (GLenum target, GLuint id);
+GLAPI void APIENTRY glEndQuery (GLenum target);
+GLAPI void APIENTRY glGetQueryiv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetQueryObjectiv (GLuint id, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetQueryObjectuiv (GLuint id, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glBindBuffer (GLenum target, GLuint buffer);
+GLAPI void APIENTRY glDeleteBuffers (GLsizei n, const GLuint *buffers);
+GLAPI void APIENTRY glGenBuffers (GLsizei n, GLuint *buffers);
+GLAPI GLboolean APIENTRY glIsBuffer (GLuint buffer);
+GLAPI void APIENTRY glBufferData (GLenum target, GLsizeiptr size, const void *data, GLenum usage);
+GLAPI void APIENTRY glBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, const void *data);
+GLAPI void APIENTRY glGetBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, void *data);
+GLAPI void *APIENTRY glMapBuffer (GLenum target, GLenum access);
+GLAPI GLboolean APIENTRY glUnmapBuffer (GLenum target);
+GLAPI void APIENTRY glGetBufferParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetBufferPointerv (GLenum target, GLenum pname, void **params);
 #endif
+#endif /* GL_VERSION_1_5 */
 
 #ifndef GL_VERSION_2_0
+#define GL_VERSION_2_0 1
+typedef char GLchar;
 #define GL_BLEND_EQUATION_RGB             0x8009
 #define GL_VERTEX_ATTRIB_ARRAY_ENABLED    0x8622
 #define GL_VERTEX_ATTRIB_ARRAY_SIZE       0x8623
@@ -458,9 +652,198 @@ extern "C" {
 #define GL_POINT_SPRITE                   0x8861
 #define GL_COORD_REPLACE                  0x8862
 #define GL_MAX_TEXTURE_COORDS             0x8871
+typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEPROC) (GLenum modeRGB, GLenum modeAlpha);
+typedef void (APIENTRYP PFNGLDRAWBUFFERSPROC) (GLsizei n, const GLenum *bufs);
+typedef void (APIENTRYP PFNGLSTENCILOPSEPARATEPROC) (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
+typedef void (APIENTRYP PFNGLSTENCILFUNCSEPARATEPROC) (GLenum face, GLenum func, GLint ref, GLuint mask);
+typedef void (APIENTRYP PFNGLSTENCILMASKSEPARATEPROC) (GLenum face, GLuint mask);
+typedef void (APIENTRYP PFNGLATTACHSHADERPROC) (GLuint program, GLuint shader);
+typedef void (APIENTRYP PFNGLBINDATTRIBLOCATIONPROC) (GLuint program, GLuint index, const GLchar *name);
+typedef void (APIENTRYP PFNGLCOMPILESHADERPROC) (GLuint shader);
+typedef GLuint (APIENTRYP PFNGLCREATEPROGRAMPROC) (void);
+typedef GLuint (APIENTRYP PFNGLCREATESHADERPROC) (GLenum type);
+typedef void (APIENTRYP PFNGLDELETEPROGRAMPROC) (GLuint program);
+typedef void (APIENTRYP PFNGLDELETESHADERPROC) (GLuint shader);
+typedef void (APIENTRYP PFNGLDETACHSHADERPROC) (GLuint program, GLuint shader);
+typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBARRAYPROC) (GLuint index);
+typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBARRAYPROC) (GLuint index);
+typedef void (APIENTRYP PFNGLGETACTIVEATTRIBPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
+typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
+typedef void (APIENTRYP PFNGLGETATTACHEDSHADERSPROC) (GLuint program, GLsizei maxCount, GLsizei *count, GLuint *shaders);
+typedef GLint (APIENTRYP PFNGLGETATTRIBLOCATIONPROC) (GLuint program, const GLchar *name);
+typedef void (APIENTRYP PFNGLGETPROGRAMIVPROC) (GLuint program, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMINFOLOGPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+typedef void (APIENTRYP PFNGLGETSHADERIVPROC) (GLuint shader, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETSHADERINFOLOGPROC) (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+typedef void (APIENTRYP PFNGLGETSHADERSOURCEPROC) (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *source);
+typedef GLint (APIENTRYP PFNGLGETUNIFORMLOCATIONPROC) (GLuint program, const GLchar *name);
+typedef void (APIENTRYP PFNGLGETUNIFORMFVPROC) (GLuint program, GLint location, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETUNIFORMIVPROC) (GLuint program, GLint location, GLint *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVPROC) (GLuint index, GLenum pname, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVPROC) (GLuint index, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVPROC) (GLuint index, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVPROC) (GLuint index, GLenum pname, void **pointer);
+typedef GLboolean (APIENTRYP PFNGLISPROGRAMPROC) (GLuint program);
+typedef GLboolean (APIENTRYP PFNGLISSHADERPROC) (GLuint shader);
+typedef void (APIENTRYP PFNGLLINKPROGRAMPROC) (GLuint program);
+typedef void (APIENTRYP PFNGLSHADERSOURCEPROC) (GLuint shader, GLsizei count, const GLchar *const*string, const GLint *length);
+typedef void (APIENTRYP PFNGLUSEPROGRAMPROC) (GLuint program);
+typedef void (APIENTRYP PFNGLUNIFORM1FPROC) (GLint location, GLfloat v0);
+typedef void (APIENTRYP PFNGLUNIFORM2FPROC) (GLint location, GLfloat v0, GLfloat v1);
+typedef void (APIENTRYP PFNGLUNIFORM3FPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+typedef void (APIENTRYP PFNGLUNIFORM4FPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+typedef void (APIENTRYP PFNGLUNIFORM1IPROC) (GLint location, GLint v0);
+typedef void (APIENTRYP PFNGLUNIFORM2IPROC) (GLint location, GLint v0, GLint v1);
+typedef void (APIENTRYP PFNGLUNIFORM3IPROC) (GLint location, GLint v0, GLint v1, GLint v2);
+typedef void (APIENTRYP PFNGLUNIFORM4IPROC) (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+typedef void (APIENTRYP PFNGLUNIFORM1FVPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM2FVPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM3FVPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM4FVPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM1IVPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORM2IVPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORM3IVPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORM4IVPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLVALIDATEPROGRAMPROC) (GLuint program);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1DPROC) (GLuint index, GLdouble x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1FPROC) (GLuint index, GLfloat x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1SPROC) (GLuint index, GLshort x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2DPROC) (GLuint index, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2FPROC) (GLuint index, GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2SPROC) (GLuint index, GLshort x, GLshort y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3FPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3SPROC) (GLuint index, GLshort x, GLshort y, GLshort z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NBVPROC) (GLuint index, const GLbyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NIVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NSVPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBVPROC) (GLuint index, const GLubyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUIVPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUSVPROC) (GLuint index, const GLushort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4BVPROC) (GLuint index, const GLbyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4FPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4IVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4SPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVPROC) (GLuint index, const GLubyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4UIVPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4USVPROC) (GLuint index, const GLushort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendEquationSeparate (GLenum modeRGB, GLenum modeAlpha);
+GLAPI void APIENTRY glDrawBuffers (GLsizei n, const GLenum *bufs);
+GLAPI void APIENTRY glStencilOpSeparate (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
+GLAPI void APIENTRY glStencilFuncSeparate (GLenum face, GLenum func, GLint ref, GLuint mask);
+GLAPI void APIENTRY glStencilMaskSeparate (GLenum face, GLuint mask);
+GLAPI void APIENTRY glAttachShader (GLuint program, GLuint shader);
+GLAPI void APIENTRY glBindAttribLocation (GLuint program, GLuint index, const GLchar *name);
+GLAPI void APIENTRY glCompileShader (GLuint shader);
+GLAPI GLuint APIENTRY glCreateProgram (void);
+GLAPI GLuint APIENTRY glCreateShader (GLenum type);
+GLAPI void APIENTRY glDeleteProgram (GLuint program);
+GLAPI void APIENTRY glDeleteShader (GLuint shader);
+GLAPI void APIENTRY glDetachShader (GLuint program, GLuint shader);
+GLAPI void APIENTRY glDisableVertexAttribArray (GLuint index);
+GLAPI void APIENTRY glEnableVertexAttribArray (GLuint index);
+GLAPI void APIENTRY glGetActiveAttrib (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
+GLAPI void APIENTRY glGetActiveUniform (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
+GLAPI void APIENTRY glGetAttachedShaders (GLuint program, GLsizei maxCount, GLsizei *count, GLuint *shaders);
+GLAPI GLint APIENTRY glGetAttribLocation (GLuint program, const GLchar *name);
+GLAPI void APIENTRY glGetProgramiv (GLuint program, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetProgramInfoLog (GLuint program, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+GLAPI void APIENTRY glGetShaderiv (GLuint shader, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetShaderInfoLog (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+GLAPI void APIENTRY glGetShaderSource (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *source);
+GLAPI GLint APIENTRY glGetUniformLocation (GLuint program, const GLchar *name);
+GLAPI void APIENTRY glGetUniformfv (GLuint program, GLint location, GLfloat *params);
+GLAPI void APIENTRY glGetUniformiv (GLuint program, GLint location, GLint *params);
+GLAPI void APIENTRY glGetVertexAttribdv (GLuint index, GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glGetVertexAttribfv (GLuint index, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetVertexAttribiv (GLuint index, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVertexAttribPointerv (GLuint index, GLenum pname, void **pointer);
+GLAPI GLboolean APIENTRY glIsProgram (GLuint program);
+GLAPI GLboolean APIENTRY glIsShader (GLuint shader);
+GLAPI void APIENTRY glLinkProgram (GLuint program);
+GLAPI void APIENTRY glShaderSource (GLuint shader, GLsizei count, const GLchar *const*string, const GLint *length);
+GLAPI void APIENTRY glUseProgram (GLuint program);
+GLAPI void APIENTRY glUniform1f (GLint location, GLfloat v0);
+GLAPI void APIENTRY glUniform2f (GLint location, GLfloat v0, GLfloat v1);
+GLAPI void APIENTRY glUniform3f (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+GLAPI void APIENTRY glUniform4f (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+GLAPI void APIENTRY glUniform1i (GLint location, GLint v0);
+GLAPI void APIENTRY glUniform2i (GLint location, GLint v0, GLint v1);
+GLAPI void APIENTRY glUniform3i (GLint location, GLint v0, GLint v1, GLint v2);
+GLAPI void APIENTRY glUniform4i (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+GLAPI void APIENTRY glUniform1fv (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform2fv (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform3fv (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform4fv (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform1iv (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniform2iv (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniform3iv (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniform4iv (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniformMatrix2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glValidateProgram (GLuint program);
+GLAPI void APIENTRY glVertexAttrib1d (GLuint index, GLdouble x);
+GLAPI void APIENTRY glVertexAttrib1dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib1f (GLuint index, GLfloat x);
+GLAPI void APIENTRY glVertexAttrib1fv (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib1s (GLuint index, GLshort x);
+GLAPI void APIENTRY glVertexAttrib1sv (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib2d (GLuint index, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glVertexAttrib2dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib2f (GLuint index, GLfloat x, GLfloat y);
+GLAPI void APIENTRY glVertexAttrib2fv (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib2s (GLuint index, GLshort x, GLshort y);
+GLAPI void APIENTRY glVertexAttrib2sv (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib3d (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glVertexAttrib3dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib3f (GLuint index, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glVertexAttrib3fv (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib3s (GLuint index, GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glVertexAttrib3sv (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4Nbv (GLuint index, const GLbyte *v);
+GLAPI void APIENTRY glVertexAttrib4Niv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttrib4Nsv (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4Nub (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
+GLAPI void APIENTRY glVertexAttrib4Nubv (GLuint index, const GLubyte *v);
+GLAPI void APIENTRY glVertexAttrib4Nuiv (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttrib4Nusv (GLuint index, const GLushort *v);
+GLAPI void APIENTRY glVertexAttrib4bv (GLuint index, const GLbyte *v);
+GLAPI void APIENTRY glVertexAttrib4d (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glVertexAttrib4dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib4f (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glVertexAttrib4fv (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib4iv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttrib4s (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
+GLAPI void APIENTRY glVertexAttrib4sv (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4ubv (GLuint index, const GLubyte *v);
+GLAPI void APIENTRY glVertexAttrib4uiv (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttrib4usv (GLuint index, const GLushort *v);
+GLAPI void APIENTRY glVertexAttribPointer (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const void *pointer);
 #endif
+#endif /* GL_VERSION_2_0 */
 
 #ifndef GL_VERSION_2_1
+#define GL_VERSION_2_1 1
 #define GL_PIXEL_PACK_BUFFER              0x88EB
 #define GL_PIXEL_UNPACK_BUFFER            0x88EC
 #define GL_PIXEL_PACK_BUFFER_BINDING      0x88ED
@@ -484,9 +867,25 @@ extern "C" {
 #define GL_SLUMINANCE8                    0x8C47
 #define GL_COMPRESSED_SLUMINANCE          0x8C4A
 #define GL_COMPRESSED_SLUMINANCE_ALPHA    0x8C4B
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glUniformMatrix2x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix3x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix2x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix4x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix3x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix4x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
 #endif
+#endif /* GL_VERSION_2_1 */
 
 #ifndef GL_VERSION_3_0
+#define GL_VERSION_3_0 1
+typedef unsigned short GLhalf;
 #define GL_COMPARE_REF_TO_TEXTURE         0x884E
 #define GL_CLIP_DISTANCE0                 0x3000
 #define GL_CLIP_DISTANCE1                 0x3001
@@ -503,7 +902,7 @@ extern "C" {
 #define GL_CONTEXT_FLAGS                  0x821E
 #define GL_COMPRESSED_RED                 0x8225
 #define GL_COMPRESSED_RG                  0x8226
-#define GL_CONTEXT_FLAG_FORWARD_COMPATIBLE_BIT 0x0001
+#define GL_CONTEXT_FLAG_FORWARD_COMPATIBLE_BIT 0x00000001
 #define GL_RGBA32F                        0x8814
 #define GL_RGB32F                         0x8815
 #define GL_RGBA16F                        0x881A
@@ -587,1354 +986,9 @@ extern "C" {
 #define GL_BUFFER_ACCESS_FLAGS            0x911F
 #define GL_BUFFER_MAP_LENGTH              0x9120
 #define GL_BUFFER_MAP_OFFSET              0x9121
-/* Reuse tokens from ARB_depth_buffer_float */
-/* reuse GL_DEPTH_COMPONENT32F */
-/* reuse GL_DEPTH32F_STENCIL8 */
-/* reuse GL_FLOAT_32_UNSIGNED_INT_24_8_REV */
-/* Reuse tokens from ARB_framebuffer_object */
-/* reuse GL_INVALID_FRAMEBUFFER_OPERATION */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_RED_SIZE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_GREEN_SIZE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_BLUE_SIZE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE */
-/* reuse GL_FRAMEBUFFER_DEFAULT */
-/* reuse GL_FRAMEBUFFER_UNDEFINED */
-/* reuse GL_DEPTH_STENCIL_ATTACHMENT */
-/* reuse GL_INDEX */
-/* reuse GL_MAX_RENDERBUFFER_SIZE */
-/* reuse GL_DEPTH_STENCIL */
-/* reuse GL_UNSIGNED_INT_24_8 */
-/* reuse GL_DEPTH24_STENCIL8 */
-/* reuse GL_TEXTURE_STENCIL_SIZE */
-/* reuse GL_TEXTURE_RED_TYPE */
-/* reuse GL_TEXTURE_GREEN_TYPE */
-/* reuse GL_TEXTURE_BLUE_TYPE */
-/* reuse GL_TEXTURE_ALPHA_TYPE */
-/* reuse GL_TEXTURE_DEPTH_TYPE */
-/* reuse GL_UNSIGNED_NORMALIZED */
-/* reuse GL_FRAMEBUFFER_BINDING */
-/* reuse GL_DRAW_FRAMEBUFFER_BINDING */
-/* reuse GL_RENDERBUFFER_BINDING */
-/* reuse GL_READ_FRAMEBUFFER */
-/* reuse GL_DRAW_FRAMEBUFFER */
-/* reuse GL_READ_FRAMEBUFFER_BINDING */
-/* reuse GL_RENDERBUFFER_SAMPLES */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER */
-/* reuse GL_FRAMEBUFFER_COMPLETE */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_READ_BUFFER */
-/* reuse GL_FRAMEBUFFER_UNSUPPORTED */
-/* reuse GL_MAX_COLOR_ATTACHMENTS */
-/* reuse GL_COLOR_ATTACHMENT0 */
-/* reuse GL_COLOR_ATTACHMENT1 */
-/* reuse GL_COLOR_ATTACHMENT2 */
-/* reuse GL_COLOR_ATTACHMENT3 */
-/* reuse GL_COLOR_ATTACHMENT4 */
-/* reuse GL_COLOR_ATTACHMENT5 */
-/* reuse GL_COLOR_ATTACHMENT6 */
-/* reuse GL_COLOR_ATTACHMENT7 */
-/* reuse GL_COLOR_ATTACHMENT8 */
-/* reuse GL_COLOR_ATTACHMENT9 */
-/* reuse GL_COLOR_ATTACHMENT10 */
-/* reuse GL_COLOR_ATTACHMENT11 */
-/* reuse GL_COLOR_ATTACHMENT12 */
-/* reuse GL_COLOR_ATTACHMENT13 */
-/* reuse GL_COLOR_ATTACHMENT14 */
-/* reuse GL_COLOR_ATTACHMENT15 */
-/* reuse GL_DEPTH_ATTACHMENT */
-/* reuse GL_STENCIL_ATTACHMENT */
-/* reuse GL_FRAMEBUFFER */
-/* reuse GL_RENDERBUFFER */
-/* reuse GL_RENDERBUFFER_WIDTH */
-/* reuse GL_RENDERBUFFER_HEIGHT */
-/* reuse GL_RENDERBUFFER_INTERNAL_FORMAT */
-/* reuse GL_STENCIL_INDEX1 */
-/* reuse GL_STENCIL_INDEX4 */
-/* reuse GL_STENCIL_INDEX8 */
-/* reuse GL_STENCIL_INDEX16 */
-/* reuse GL_RENDERBUFFER_RED_SIZE */
-/* reuse GL_RENDERBUFFER_GREEN_SIZE */
-/* reuse GL_RENDERBUFFER_BLUE_SIZE */
-/* reuse GL_RENDERBUFFER_ALPHA_SIZE */
-/* reuse GL_RENDERBUFFER_DEPTH_SIZE */
-/* reuse GL_RENDERBUFFER_STENCIL_SIZE */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE */
-/* reuse GL_MAX_SAMPLES */
-/* Reuse tokens from ARB_framebuffer_sRGB */
-/* reuse GL_FRAMEBUFFER_SRGB */
-/* Reuse tokens from ARB_half_float_vertex */
-/* reuse GL_HALF_FLOAT */
-/* Reuse tokens from ARB_map_buffer_range */
-/* reuse GL_MAP_READ_BIT */
-/* reuse GL_MAP_WRITE_BIT */
-/* reuse GL_MAP_INVALIDATE_RANGE_BIT */
-/* reuse GL_MAP_INVALIDATE_BUFFER_BIT */
-/* reuse GL_MAP_FLUSH_EXPLICIT_BIT */
-/* reuse GL_MAP_UNSYNCHRONIZED_BIT */
-/* Reuse tokens from ARB_texture_compression_rgtc */
-/* reuse GL_COMPRESSED_RED_RGTC1 */
-/* reuse GL_COMPRESSED_SIGNED_RED_RGTC1 */
-/* reuse GL_COMPRESSED_RG_RGTC2 */
-/* reuse GL_COMPRESSED_SIGNED_RG_RGTC2 */
-/* Reuse tokens from ARB_texture_rg */
-/* reuse GL_RG */
-/* reuse GL_RG_INTEGER */
-/* reuse GL_R8 */
-/* reuse GL_R16 */
-/* reuse GL_RG8 */
-/* reuse GL_RG16 */
-/* reuse GL_R16F */
-/* reuse GL_R32F */
-/* reuse GL_RG16F */
-/* reuse GL_RG32F */
-/* reuse GL_R8I */
-/* reuse GL_R8UI */
-/* reuse GL_R16I */
-/* reuse GL_R16UI */
-/* reuse GL_R32I */
-/* reuse GL_R32UI */
-/* reuse GL_RG8I */
-/* reuse GL_RG8UI */
-/* reuse GL_RG16I */
-/* reuse GL_RG16UI */
-/* reuse GL_RG32I */
-/* reuse GL_RG32UI */
-/* Reuse tokens from ARB_vertex_array_object */
-/* reuse GL_VERTEX_ARRAY_BINDING */
-#define GL_CLAMP_VERTEX_COLOR             0x891A
-#define GL_CLAMP_FRAGMENT_COLOR           0x891B
-#define GL_ALPHA_INTEGER                  0x8D97
-/* Reuse tokens from ARB_framebuffer_object */
-/* reuse GL_TEXTURE_LUMINANCE_TYPE */
-/* reuse GL_TEXTURE_INTENSITY_TYPE */
-#endif
-
-#ifndef GL_VERSION_3_1
-#define GL_SAMPLER_2D_RECT                0x8B63
-#define GL_SAMPLER_2D_RECT_SHADOW         0x8B64
-#define GL_SAMPLER_BUFFER                 0x8DC2
-#define GL_INT_SAMPLER_2D_RECT            0x8DCD
-#define GL_INT_SAMPLER_BUFFER             0x8DD0
-#define GL_UNSIGNED_INT_SAMPLER_2D_RECT   0x8DD5
-#define GL_UNSIGNED_INT_SAMPLER_BUFFER    0x8DD8
-#define GL_TEXTURE_BUFFER                 0x8C2A
-#define GL_MAX_TEXTURE_BUFFER_SIZE        0x8C2B
-#define GL_TEXTURE_BINDING_BUFFER         0x8C2C
-#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING 0x8C2D
-#define GL_TEXTURE_RECTANGLE              0x84F5
-#define GL_TEXTURE_BINDING_RECTANGLE      0x84F6
-#define GL_PROXY_TEXTURE_RECTANGLE        0x84F7
-#define GL_MAX_RECTANGLE_TEXTURE_SIZE     0x84F8
-#define GL_RED_SNORM                      0x8F90
-#define GL_RG_SNORM                       0x8F91
-#define GL_RGB_SNORM                      0x8F92
-#define GL_RGBA_SNORM                     0x8F93
-#define GL_R8_SNORM                       0x8F94
-#define GL_RG8_SNORM                      0x8F95
-#define GL_RGB8_SNORM                     0x8F96
-#define GL_RGBA8_SNORM                    0x8F97
-#define GL_R16_SNORM                      0x8F98
-#define GL_RG16_SNORM                     0x8F99
-#define GL_RGB16_SNORM                    0x8F9A
-#define GL_RGBA16_SNORM                   0x8F9B
-#define GL_SIGNED_NORMALIZED              0x8F9C
-#define GL_PRIMITIVE_RESTART              0x8F9D
-#define GL_PRIMITIVE_RESTART_INDEX        0x8F9E
-/* Reuse tokens from ARB_copy_buffer */
-/* reuse GL_COPY_READ_BUFFER */
-/* reuse GL_COPY_WRITE_BUFFER */
-/* Reuse tokens from ARB_draw_instanced (none) */
-/* Reuse tokens from ARB_uniform_buffer_object */
-/* reuse GL_UNIFORM_BUFFER */
-/* reuse GL_UNIFORM_BUFFER_BINDING */
-/* reuse GL_UNIFORM_BUFFER_START */
-/* reuse GL_UNIFORM_BUFFER_SIZE */
-/* reuse GL_MAX_VERTEX_UNIFORM_BLOCKS */
-/* reuse GL_MAX_FRAGMENT_UNIFORM_BLOCKS */
-/* reuse GL_MAX_COMBINED_UNIFORM_BLOCKS */
-/* reuse GL_MAX_UNIFORM_BUFFER_BINDINGS */
-/* reuse GL_MAX_UNIFORM_BLOCK_SIZE */
-/* reuse GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS */
-/* reuse GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS */
-/* reuse GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT */
-/* reuse GL_ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH */
-/* reuse GL_ACTIVE_UNIFORM_BLOCKS */
-/* reuse GL_UNIFORM_TYPE */
-/* reuse GL_UNIFORM_SIZE */
-/* reuse GL_UNIFORM_NAME_LENGTH */
-/* reuse GL_UNIFORM_BLOCK_INDEX */
-/* reuse GL_UNIFORM_OFFSET */
-/* reuse GL_UNIFORM_ARRAY_STRIDE */
-/* reuse GL_UNIFORM_MATRIX_STRIDE */
-/* reuse GL_UNIFORM_IS_ROW_MAJOR */
-/* reuse GL_UNIFORM_BLOCK_BINDING */
-/* reuse GL_UNIFORM_BLOCK_DATA_SIZE */
-/* reuse GL_UNIFORM_BLOCK_NAME_LENGTH */
-/* reuse GL_UNIFORM_BLOCK_ACTIVE_UNIFORMS */
-/* reuse GL_UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES */
-/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER */
-/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER */
-/* reuse GL_INVALID_INDEX */
-#endif
-
-#ifndef GL_VERSION_3_2
-#define GL_CONTEXT_CORE_PROFILE_BIT       0x00000001
-#define GL_CONTEXT_COMPATIBILITY_PROFILE_BIT 0x00000002
-#define GL_LINES_ADJACENCY                0x000A
-#define GL_LINE_STRIP_ADJACENCY           0x000B
-#define GL_TRIANGLES_ADJACENCY            0x000C
-#define GL_TRIANGLE_STRIP_ADJACENCY       0x000D
-#define GL_PROGRAM_POINT_SIZE             0x8642
-#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS 0x8C29
-#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED 0x8DA7
-#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS 0x8DA8
-#define GL_GEOMETRY_SHADER                0x8DD9
-#define GL_GEOMETRY_VERTICES_OUT          0x8916
-#define GL_GEOMETRY_INPUT_TYPE            0x8917
-#define GL_GEOMETRY_OUTPUT_TYPE           0x8918
-#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS 0x8DDF
-#define GL_MAX_GEOMETRY_OUTPUT_VERTICES   0x8DE0
-#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS 0x8DE1
-#define GL_MAX_VERTEX_OUTPUT_COMPONENTS   0x9122
-#define GL_MAX_GEOMETRY_INPUT_COMPONENTS  0x9123
-#define GL_MAX_GEOMETRY_OUTPUT_COMPONENTS 0x9124
-#define GL_MAX_FRAGMENT_INPUT_COMPONENTS  0x9125
-#define GL_CONTEXT_PROFILE_MASK           0x9126
-/* reuse GL_MAX_VARYING_COMPONENTS */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER */
-/* Reuse tokens from ARB_depth_clamp */
-/* reuse GL_DEPTH_CLAMP */
-/* Reuse tokens from ARB_draw_elements_base_vertex (none) */
-/* Reuse tokens from ARB_fragment_coord_conventions (none) */
-/* Reuse tokens from ARB_provoking_vertex */
-/* reuse GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION */
-/* reuse GL_FIRST_VERTEX_CONVENTION */
-/* reuse GL_LAST_VERTEX_CONVENTION */
-/* reuse GL_PROVOKING_VERTEX */
-/* Reuse tokens from ARB_seamless_cube_map */
-/* reuse GL_TEXTURE_CUBE_MAP_SEAMLESS */
-/* Reuse tokens from ARB_sync */
-/* reuse GL_MAX_SERVER_WAIT_TIMEOUT */
-/* reuse GL_OBJECT_TYPE */
-/* reuse GL_SYNC_CONDITION */
-/* reuse GL_SYNC_STATUS */
-/* reuse GL_SYNC_FLAGS */
-/* reuse GL_SYNC_FENCE */
-/* reuse GL_SYNC_GPU_COMMANDS_COMPLETE */
-/* reuse GL_UNSIGNALED */
-/* reuse GL_SIGNALED */
-/* reuse GL_ALREADY_SIGNALED */
-/* reuse GL_TIMEOUT_EXPIRED */
-/* reuse GL_CONDITION_SATISFIED */
-/* reuse GL_WAIT_FAILED */
-/* reuse GL_TIMEOUT_IGNORED */
-/* reuse GL_SYNC_FLUSH_COMMANDS_BIT */
-/* reuse GL_TIMEOUT_IGNORED */
-/* Reuse tokens from ARB_texture_multisample */
-/* reuse GL_SAMPLE_POSITION */
-/* reuse GL_SAMPLE_MASK */
-/* reuse GL_SAMPLE_MASK_VALUE */
-/* reuse GL_MAX_SAMPLE_MASK_WORDS */
-/* reuse GL_TEXTURE_2D_MULTISAMPLE */
-/* reuse GL_PROXY_TEXTURE_2D_MULTISAMPLE */
-/* reuse GL_TEXTURE_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_PROXY_TEXTURE_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_TEXTURE_BINDING_2D_MULTISAMPLE */
-/* reuse GL_TEXTURE_BINDING_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_TEXTURE_SAMPLES */
-/* reuse GL_TEXTURE_FIXED_SAMPLE_LOCATIONS */
-/* reuse GL_SAMPLER_2D_MULTISAMPLE */
-/* reuse GL_INT_SAMPLER_2D_MULTISAMPLE */
-/* reuse GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE */
-/* reuse GL_SAMPLER_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_INT_SAMPLER_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_MAX_COLOR_TEXTURE_SAMPLES */
-/* reuse GL_MAX_DEPTH_TEXTURE_SAMPLES */
-/* reuse GL_MAX_INTEGER_SAMPLES */
-/* Don't need to reuse tokens from ARB_vertex_array_bgra since they're already in 1.2 core */
-#endif
-
-#ifndef GL_VERSION_3_3
-#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR    0x88FE
-/* Reuse tokens from ARB_blend_func_extended */
-/* reuse GL_SRC1_COLOR */
-/* reuse GL_ONE_MINUS_SRC1_COLOR */
-/* reuse GL_ONE_MINUS_SRC1_ALPHA */
-/* reuse GL_MAX_DUAL_SOURCE_DRAW_BUFFERS */
-/* Reuse tokens from ARB_explicit_attrib_location (none) */
-/* Reuse tokens from ARB_occlusion_query2 */
-/* reuse GL_ANY_SAMPLES_PASSED */
-/* Reuse tokens from ARB_sampler_objects */
-/* reuse GL_SAMPLER_BINDING */
-/* Reuse tokens from ARB_shader_bit_encoding (none) */
-/* Reuse tokens from ARB_texture_rgb10_a2ui */
-/* reuse GL_RGB10_A2UI */
-/* Reuse tokens from ARB_texture_swizzle */
-/* reuse GL_TEXTURE_SWIZZLE_R */
-/* reuse GL_TEXTURE_SWIZZLE_G */
-/* reuse GL_TEXTURE_SWIZZLE_B */
-/* reuse GL_TEXTURE_SWIZZLE_A */
-/* reuse GL_TEXTURE_SWIZZLE_RGBA */
-/* Reuse tokens from ARB_timer_query */
-/* reuse GL_TIME_ELAPSED */
-/* reuse GL_TIMESTAMP */
-/* Reuse tokens from ARB_vertex_type_2_10_10_10_rev */
-/* reuse GL_INT_2_10_10_10_REV */
-#endif
-
-#ifndef GL_VERSION_4_0
-#define GL_SAMPLE_SHADING                 0x8C36
-#define GL_MIN_SAMPLE_SHADING_VALUE       0x8C37
-#define GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET 0x8E5E
-#define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET 0x8E5F
-#define GL_TEXTURE_CUBE_MAP_ARRAY         0x9009
-#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY 0x900A
-#define GL_PROXY_TEXTURE_CUBE_MAP_ARRAY   0x900B
-#define GL_SAMPLER_CUBE_MAP_ARRAY         0x900C
-#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW  0x900D
-#define GL_INT_SAMPLER_CUBE_MAP_ARRAY     0x900E
-#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY 0x900F
-/* Reuse tokens from ARB_texture_query_lod (none) */
-/* Reuse tokens from ARB_draw_buffers_blend (none) */
-/* Reuse tokens from ARB_draw_indirect */
-/* reuse GL_DRAW_INDIRECT_BUFFER */
-/* reuse GL_DRAW_INDIRECT_BUFFER_BINDING */
-/* Reuse tokens from ARB_gpu_shader5 */
-/* reuse GL_GEOMETRY_SHADER_INVOCATIONS */
-/* reuse GL_MAX_GEOMETRY_SHADER_INVOCATIONS */
-/* reuse GL_MIN_FRAGMENT_INTERPOLATION_OFFSET */
-/* reuse GL_MAX_FRAGMENT_INTERPOLATION_OFFSET */
-/* reuse GL_FRAGMENT_INTERPOLATION_OFFSET_BITS */
-/* reuse GL_MAX_VERTEX_STREAMS */
-/* Reuse tokens from ARB_gpu_shader_fp64 */
-/* reuse GL_DOUBLE_VEC2 */
-/* reuse GL_DOUBLE_VEC3 */
-/* reuse GL_DOUBLE_VEC4 */
-/* reuse GL_DOUBLE_MAT2 */
-/* reuse GL_DOUBLE_MAT3 */
-/* reuse GL_DOUBLE_MAT4 */
-/* reuse GL_DOUBLE_MAT2x3 */
-/* reuse GL_DOUBLE_MAT2x4 */
-/* reuse GL_DOUBLE_MAT3x2 */
-/* reuse GL_DOUBLE_MAT3x4 */
-/* reuse GL_DOUBLE_MAT4x2 */
-/* reuse GL_DOUBLE_MAT4x3 */
-/* Reuse tokens from ARB_shader_subroutine */
-/* reuse GL_ACTIVE_SUBROUTINES */
-/* reuse GL_ACTIVE_SUBROUTINE_UNIFORMS */
-/* reuse GL_ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS */
-/* reuse GL_ACTIVE_SUBROUTINE_MAX_LENGTH */
-/* reuse GL_ACTIVE_SUBROUTINE_UNIFORM_MAX_LENGTH */
-/* reuse GL_MAX_SUBROUTINES */
-/* reuse GL_MAX_SUBROUTINE_UNIFORM_LOCATIONS */
-/* reuse GL_NUM_COMPATIBLE_SUBROUTINES */
-/* reuse GL_COMPATIBLE_SUBROUTINES */
-/* Reuse tokens from ARB_tessellation_shader */
-/* reuse GL_PATCHES */
-/* reuse GL_PATCH_VERTICES */
-/* reuse GL_PATCH_DEFAULT_INNER_LEVEL */
-/* reuse GL_PATCH_DEFAULT_OUTER_LEVEL */
-/* reuse GL_TESS_CONTROL_OUTPUT_VERTICES */
-/* reuse GL_TESS_GEN_MODE */
-/* reuse GL_TESS_GEN_SPACING */
-/* reuse GL_TESS_GEN_VERTEX_ORDER */
-/* reuse GL_TESS_GEN_POINT_MODE */
-/* reuse GL_ISOLINES */
-/* reuse GL_FRACTIONAL_ODD */
-/* reuse GL_FRACTIONAL_EVEN */
-/* reuse GL_MAX_PATCH_VERTICES */
-/* reuse GL_MAX_TESS_GEN_LEVEL */
-/* reuse GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS */
-/* reuse GL_MAX_TESS_EVALUATION_UNIFORM_COMPONENTS */
-/* reuse GL_MAX_TESS_CONTROL_TEXTURE_IMAGE_UNITS */
-/* reuse GL_MAX_TESS_EVALUATION_TEXTURE_IMAGE_UNITS */
-/* reuse GL_MAX_TESS_CONTROL_OUTPUT_COMPONENTS */
-/* reuse GL_MAX_TESS_PATCH_COMPONENTS */
-/* reuse GL_MAX_TESS_CONTROL_TOTAL_OUTPUT_COMPONENTS */
-/* reuse GL_MAX_TESS_EVALUATION_OUTPUT_COMPONENTS */
-/* reuse GL_MAX_TESS_CONTROL_UNIFORM_BLOCKS */
-/* reuse GL_MAX_TESS_EVALUATION_UNIFORM_BLOCKS */
-/* reuse GL_MAX_TESS_CONTROL_INPUT_COMPONENTS */
-/* reuse GL_MAX_TESS_EVALUATION_INPUT_COMPONENTS */
-/* reuse GL_MAX_COMBINED_TESS_CONTROL_UNIFORM_COMPONENTS */
-/* reuse GL_MAX_COMBINED_TESS_EVALUATION_UNIFORM_COMPONENTS */
-/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_CONTROL_SHADER */
-/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_EVALUATION_SHADER */
-/* reuse GL_TESS_EVALUATION_SHADER */
-/* reuse GL_TESS_CONTROL_SHADER */
-/* Reuse tokens from ARB_texture_buffer_object_rgb32 (none) */
-/* Reuse tokens from ARB_transform_feedback2 */
-/* reuse GL_TRANSFORM_FEEDBACK */
-/* reuse GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED */
-/* reuse GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE */
-/* reuse GL_TRANSFORM_FEEDBACK_BINDING */
-/* Reuse tokens from ARB_transform_feedback3 */
-/* reuse GL_MAX_TRANSFORM_FEEDBACK_BUFFERS */
-/* reuse GL_MAX_VERTEX_STREAMS */
-#endif
-
-#ifndef GL_VERSION_4_1
-/* Reuse tokens from ARB_ES2_compatibility */
-/* reuse GL_FIXED */
-/* reuse GL_IMPLEMENTATION_COLOR_READ_TYPE */
-/* reuse GL_IMPLEMENTATION_COLOR_READ_FORMAT */
-/* reuse GL_LOW_FLOAT */
-/* reuse GL_MEDIUM_FLOAT */
-/* reuse GL_HIGH_FLOAT */
-/* reuse GL_LOW_INT */
-/* reuse GL_MEDIUM_INT */
-/* reuse GL_HIGH_INT */
-/* reuse GL_SHADER_COMPILER */
-/* reuse GL_SHADER_BINARY_FORMATS */
-/* reuse GL_NUM_SHADER_BINARY_FORMATS */
-/* reuse GL_MAX_VERTEX_UNIFORM_VECTORS */
-/* reuse GL_MAX_VARYING_VECTORS */
-/* reuse GL_MAX_FRAGMENT_UNIFORM_VECTORS */
-/* reuse GL_RGB565 */
-/* Reuse tokens from ARB_get_program_binary */
-/* reuse GL_PROGRAM_BINARY_RETRIEVABLE_HINT */
-/* reuse GL_PROGRAM_BINARY_LENGTH */
-/* reuse GL_NUM_PROGRAM_BINARY_FORMATS */
-/* reuse GL_PROGRAM_BINARY_FORMATS */
-/* Reuse tokens from ARB_separate_shader_objects */
-/* reuse GL_VERTEX_SHADER_BIT */
-/* reuse GL_FRAGMENT_SHADER_BIT */
-/* reuse GL_GEOMETRY_SHADER_BIT */
-/* reuse GL_TESS_CONTROL_SHADER_BIT */
-/* reuse GL_TESS_EVALUATION_SHADER_BIT */
-/* reuse GL_ALL_SHADER_BITS */
-/* reuse GL_PROGRAM_SEPARABLE */
-/* reuse GL_ACTIVE_PROGRAM */
-/* reuse GL_PROGRAM_PIPELINE_BINDING */
-/* Reuse tokens from ARB_shader_precision (none) */
-/* Reuse tokens from ARB_vertex_attrib_64bit - all are in GL 3.0 and 4.0 already */
-/* Reuse tokens from ARB_viewport_array - some are in GL 1.1 and ARB_provoking_vertex already */
-/* reuse GL_MAX_VIEWPORTS */
-/* reuse GL_VIEWPORT_SUBPIXEL_BITS */
-/* reuse GL_VIEWPORT_BOUNDS_RANGE */
-/* reuse GL_LAYER_PROVOKING_VERTEX */
-/* reuse GL_VIEWPORT_INDEX_PROVOKING_VERTEX */
-/* reuse GL_UNDEFINED_VERTEX */
-#endif
-
-#ifndef GL_VERSION_4_2
-/* Reuse tokens from ARB_base_instance (none) */
-/* Reuse tokens from ARB_shading_language_420pack (none) */
-/* Reuse tokens from ARB_transform_feedback_instanced (none) */
-/* Reuse tokens from ARB_compressed_texture_pixel_storage */
-/* reuse GL_UNPACK_COMPRESSED_BLOCK_WIDTH */
-/* reuse GL_UNPACK_COMPRESSED_BLOCK_HEIGHT */
-/* reuse GL_UNPACK_COMPRESSED_BLOCK_DEPTH */
-/* reuse GL_UNPACK_COMPRESSED_BLOCK_SIZE */
-/* reuse GL_PACK_COMPRESSED_BLOCK_WIDTH */
-/* reuse GL_PACK_COMPRESSED_BLOCK_HEIGHT */
-/* reuse GL_PACK_COMPRESSED_BLOCK_DEPTH */
-/* reuse GL_PACK_COMPRESSED_BLOCK_SIZE */
-/* Reuse tokens from ARB_conservative_depth (none) */
-/* Reuse tokens from ARB_internalformat_query */
-/* reuse GL_NUM_SAMPLE_COUNTS */
-/* Reuse tokens from ARB_map_buffer_alignment */
-/* reuse GL_MIN_MAP_BUFFER_ALIGNMENT */
-/* Reuse tokens from ARB_shader_atomic_counters */
-/* reuse GL_ATOMIC_COUNTER_BUFFER */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_BINDING */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_START */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_SIZE */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_DATA_SIZE */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_ACTIVE_ATOMIC_COUNTERS */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_ACTIVE_ATOMIC_COUNTER_INDICES */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_VERTEX_SHADER */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_TESS_CONTROL_SHADER */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_TESS_EVALUATION_SHADER */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_GEOMETRY_SHADER */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_FRAGMENT_SHADER */
-/* reuse GL_MAX_VERTEX_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_TESS_CONTROL_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_TESS_EVALUATION_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_GEOMETRY_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_FRAGMENT_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_COMBINED_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_VERTEX_ATOMIC_COUNTERS */
-/* reuse GL_MAX_TESS_CONTROL_ATOMIC_COUNTERS */
-/* reuse GL_MAX_TESS_EVALUATION_ATOMIC_COUNTERS */
-/* reuse GL_MAX_GEOMETRY_ATOMIC_COUNTERS */
-/* reuse GL_MAX_FRAGMENT_ATOMIC_COUNTERS */
-/* reuse GL_MAX_COMBINED_ATOMIC_COUNTERS */
-/* reuse GL_MAX_ATOMIC_COUNTER_BUFFER_SIZE */
-/* reuse GL_MAX_ATOMIC_COUNTER_BUFFER_BINDINGS */
-/* reuse GL_ACTIVE_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_UNIFORM_ATOMIC_COUNTER_BUFFER_INDEX */
-/* reuse GL_UNSIGNED_INT_ATOMIC_COUNTER */
-/* Reuse tokens from ARB_shader_image_load_store */
-/* reuse GL_VERTEX_ATTRIB_ARRAY_BARRIER_BIT */
-/* reuse GL_ELEMENT_ARRAY_BARRIER_BIT */
-/* reuse GL_UNIFORM_BARRIER_BIT */
-/* reuse GL_TEXTURE_FETCH_BARRIER_BIT */
-/* reuse GL_SHADER_IMAGE_ACCESS_BARRIER_BIT */
-/* reuse GL_COMMAND_BARRIER_BIT */
-/* reuse GL_PIXEL_BUFFER_BARRIER_BIT */
-/* reuse GL_TEXTURE_UPDATE_BARRIER_BIT */
-/* reuse GL_BUFFER_UPDATE_BARRIER_BIT */
-/* reuse GL_FRAMEBUFFER_BARRIER_BIT */
-/* reuse GL_TRANSFORM_FEEDBACK_BARRIER_BIT */
-/* reuse GL_ATOMIC_COUNTER_BARRIER_BIT */
-/* reuse GL_ALL_BARRIER_BITS */
-/* reuse GL_MAX_IMAGE_UNITS */
-/* reuse GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS */
-/* reuse GL_IMAGE_BINDING_NAME */
-/* reuse GL_IMAGE_BINDING_LEVEL */
-/* reuse GL_IMAGE_BINDING_LAYERED */
-/* reuse GL_IMAGE_BINDING_LAYER */
-/* reuse GL_IMAGE_BINDING_ACCESS */
-/* reuse GL_IMAGE_1D */
-/* reuse GL_IMAGE_2D */
-/* reuse GL_IMAGE_3D */
-/* reuse GL_IMAGE_2D_RECT */
-/* reuse GL_IMAGE_CUBE */
-/* reuse GL_IMAGE_BUFFER */
-/* reuse GL_IMAGE_1D_ARRAY */
-/* reuse GL_IMAGE_2D_ARRAY */
-/* reuse GL_IMAGE_CUBE_MAP_ARRAY */
-/* reuse GL_IMAGE_2D_MULTISAMPLE */
-/* reuse GL_IMAGE_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_INT_IMAGE_1D */
-/* reuse GL_INT_IMAGE_2D */
-/* reuse GL_INT_IMAGE_3D */
-/* reuse GL_INT_IMAGE_2D_RECT */
-/* reuse GL_INT_IMAGE_CUBE */
-/* reuse GL_INT_IMAGE_BUFFER */
-/* reuse GL_INT_IMAGE_1D_ARRAY */
-/* reuse GL_INT_IMAGE_2D_ARRAY */
-/* reuse GL_INT_IMAGE_CUBE_MAP_ARRAY */
-/* reuse GL_INT_IMAGE_2D_MULTISAMPLE */
-/* reuse GL_INT_IMAGE_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_UNSIGNED_INT_IMAGE_1D */
-/* reuse GL_UNSIGNED_INT_IMAGE_2D */
-/* reuse GL_UNSIGNED_INT_IMAGE_3D */
-/* reuse GL_UNSIGNED_INT_IMAGE_2D_RECT */
-/* reuse GL_UNSIGNED_INT_IMAGE_CUBE */
-/* reuse GL_UNSIGNED_INT_IMAGE_BUFFER */
-/* reuse GL_UNSIGNED_INT_IMAGE_1D_ARRAY */
-/* reuse GL_UNSIGNED_INT_IMAGE_2D_ARRAY */
-/* reuse GL_UNSIGNED_INT_IMAGE_CUBE_MAP_ARRAY */
-/* reuse GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE */
-/* reuse GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_MAX_IMAGE_SAMPLES */
-/* reuse GL_IMAGE_BINDING_FORMAT */
-/* reuse GL_IMAGE_FORMAT_COMPATIBILITY_TYPE */
-/* reuse GL_IMAGE_FORMAT_COMPATIBILITY_BY_SIZE */
-/* reuse GL_IMAGE_FORMAT_COMPATIBILITY_BY_CLASS */
-/* reuse GL_MAX_VERTEX_IMAGE_UNIFORMS */
-/* reuse GL_MAX_TESS_CONTROL_IMAGE_UNIFORMS */
-/* reuse GL_MAX_TESS_EVALUATION_IMAGE_UNIFORMS */
-/* reuse GL_MAX_GEOMETRY_IMAGE_UNIFORMS */
-/* reuse GL_MAX_FRAGMENT_IMAGE_UNIFORMS */
-/* reuse GL_MAX_COMBINED_IMAGE_UNIFORMS */
-/* Reuse tokens from ARB_shading_language_packing (none) */
-/* Reuse tokens from ARB_texture_storage */
-/* reuse GL_TEXTURE_IMMUTABLE_FORMAT */
-#endif
-
-#ifndef GL_VERSION_4_3
-#define GL_NUM_SHADING_LANGUAGE_VERSIONS  0x82E9
-#define GL_VERTEX_ATTRIB_ARRAY_LONG       0x874E
-/* Reuse tokens from ARB_arrays_of_arrays (none, GLSL only) */
-/* Reuse tokens from ARB_fragment_layer_viewport (none, GLSL only) */
-/* Reuse tokens from ARB_shader_image_size (none, GLSL only) */
-/* Reuse tokens from ARB_ES3_compatibility */
-/* reuse GL_COMPRESSED_RGB8_ETC2 */
-/* reuse GL_COMPRESSED_SRGB8_ETC2 */
-/* reuse GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2 */
-/* reuse GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2 */
-/* reuse GL_COMPRESSED_RGBA8_ETC2_EAC */
-/* reuse GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC */
-/* reuse GL_COMPRESSED_R11_EAC */
-/* reuse GL_COMPRESSED_SIGNED_R11_EAC */
-/* reuse GL_COMPRESSED_RG11_EAC */
-/* reuse GL_COMPRESSED_SIGNED_RG11_EAC */
-/* reuse GL_PRIMITIVE_RESTART_FIXED_INDEX */
-/* reuse GL_ANY_SAMPLES_PASSED_CONSERVATIVE */
-/* reuse GL_MAX_ELEMENT_INDEX */
-/* Reuse tokens from ARB_clear_buffer_object (none) */
-/* Reuse tokens from ARB_compute_shader */
-/* reuse GL_COMPUTE_SHADER */
-/* reuse GL_MAX_COMPUTE_UNIFORM_BLOCKS */
-/* reuse GL_MAX_COMPUTE_TEXTURE_IMAGE_UNITS */
-/* reuse GL_MAX_COMPUTE_IMAGE_UNIFORMS */
-/* reuse GL_MAX_COMPUTE_SHARED_MEMORY_SIZE */
-/* reuse GL_MAX_COMPUTE_UNIFORM_COMPONENTS */
-/* reuse GL_MAX_COMPUTE_ATOMIC_COUNTER_BUFFERS */
-/* reuse GL_MAX_COMPUTE_ATOMIC_COUNTERS */
-/* reuse GL_MAX_COMBINED_COMPUTE_UNIFORM_COMPONENTS */
-/* reuse GL_MAX_COMPUTE_LOCAL_INVOCATIONS */
-/* reuse GL_MAX_COMPUTE_WORK_GROUP_COUNT */
-/* reuse GL_MAX_COMPUTE_WORK_GROUP_SIZE */
-/* reuse GL_COMPUTE_LOCAL_WORK_SIZE */
-/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_COMPUTE_SHADER */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_COMPUTE_SHADER */
-/* reuse GL_DISPATCH_INDIRECT_BUFFER */
-/* reuse GL_DISPATCH_INDIRECT_BUFFER_BINDING */
-/* Reuse tokens from ARB_copy_image (none) */
-/* Reuse tokens from KHR_debug */
-/* reuse GL_DEBUG_OUTPUT_SYNCHRONOUS */
-/* reuse GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH */
-/* reuse GL_DEBUG_CALLBACK_FUNCTION */
-/* reuse GL_DEBUG_CALLBACK_USER_PARAM */
-/* reuse GL_DEBUG_SOURCE_API */
-/* reuse GL_DEBUG_SOURCE_WINDOW_SYSTEM */
-/* reuse GL_DEBUG_SOURCE_SHADER_COMPILER */
-/* reuse GL_DEBUG_SOURCE_THIRD_PARTY */
-/* reuse GL_DEBUG_SOURCE_APPLICATION */
-/* reuse GL_DEBUG_SOURCE_OTHER */
-/* reuse GL_DEBUG_TYPE_ERROR */
-/* reuse GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR */
-/* reuse GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR */
-/* reuse GL_DEBUG_TYPE_PORTABILITY */
-/* reuse GL_DEBUG_TYPE_PERFORMANCE */
-/* reuse GL_DEBUG_TYPE_OTHER */
-/* reuse GL_MAX_DEBUG_MESSAGE_LENGTH */
-/* reuse GL_MAX_DEBUG_LOGGED_MESSAGES */
-/* reuse GL_DEBUG_LOGGED_MESSAGES */
-/* reuse GL_DEBUG_SEVERITY_HIGH */
-/* reuse GL_DEBUG_SEVERITY_MEDIUM */
-/* reuse GL_DEBUG_SEVERITY_LOW */
-/* reuse GL_DEBUG_TYPE_MARKER */
-/* reuse GL_DEBUG_TYPE_PUSH_GROUP */
-/* reuse GL_DEBUG_TYPE_POP_GROUP */
-/* reuse GL_DEBUG_SEVERITY_NOTIFICATION */
-/* reuse GL_MAX_DEBUG_GROUP_STACK_DEPTH */
-/* reuse GL_DEBUG_GROUP_STACK_DEPTH */
-/* reuse GL_BUFFER */
-/* reuse GL_SHADER */
-/* reuse GL_PROGRAM */
-/* reuse GL_QUERY */
-/* reuse GL_PROGRAM_PIPELINE */
-/* reuse GL_SAMPLER */
-/* reuse GL_DISPLAY_LIST */
-/* reuse GL_MAX_LABEL_LENGTH */
-/* reuse GL_DEBUG_OUTPUT */
-/* reuse GL_CONTEXT_FLAG_DEBUG_BIT */
-/* reuse GL_STACK_UNDERFLOW */
-/* reuse GL_STACK_OVERFLOW */
-/* Reuse tokens from ARB_explicit_uniform_location */
-/* reuse GL_MAX_UNIFORM_LOCATIONS */
-/* Reuse tokens from ARB_framebuffer_no_attachments */
-/* reuse GL_FRAMEBUFFER_DEFAULT_WIDTH */
-/* reuse GL_FRAMEBUFFER_DEFAULT_HEIGHT */
-/* reuse GL_FRAMEBUFFER_DEFAULT_LAYERS */
-/* reuse GL_FRAMEBUFFER_DEFAULT_SAMPLES */
-/* reuse GL_FRAMEBUFFER_DEFAULT_FIXED_SAMPLE_LOCATIONS */
-/* reuse GL_MAX_FRAMEBUFFER_WIDTH */
-/* reuse GL_MAX_FRAMEBUFFER_HEIGHT */
-/* reuse GL_MAX_FRAMEBUFFER_LAYERS */
-/* reuse GL_MAX_FRAMEBUFFER_SAMPLES */
-/* Reuse tokens from ARB_internalformat_query2 */
-/* reuse GL_INTERNALFORMAT_SUPPORTED */
-/* reuse GL_INTERNALFORMAT_PREFERRED */
-/* reuse GL_INTERNALFORMAT_RED_SIZE */
-/* reuse GL_INTERNALFORMAT_GREEN_SIZE */
-/* reuse GL_INTERNALFORMAT_BLUE_SIZE */
-/* reuse GL_INTERNALFORMAT_ALPHA_SIZE */
-/* reuse GL_INTERNALFORMAT_DEPTH_SIZE */
-/* reuse GL_INTERNALFORMAT_STENCIL_SIZE */
-/* reuse GL_INTERNALFORMAT_SHARED_SIZE */
-/* reuse GL_INTERNALFORMAT_RED_TYPE */
-/* reuse GL_INTERNALFORMAT_GREEN_TYPE */
-/* reuse GL_INTERNALFORMAT_BLUE_TYPE */
-/* reuse GL_INTERNALFORMAT_ALPHA_TYPE */
-/* reuse GL_INTERNALFORMAT_DEPTH_TYPE */
-/* reuse GL_INTERNALFORMAT_STENCIL_TYPE */
-/* reuse GL_MAX_WIDTH */
-/* reuse GL_MAX_HEIGHT */
-/* reuse GL_MAX_DEPTH */
-/* reuse GL_MAX_LAYERS */
-/* reuse GL_MAX_COMBINED_DIMENSIONS */
-/* reuse GL_COLOR_COMPONENTS */
-/* reuse GL_DEPTH_COMPONENTS */
-/* reuse GL_STENCIL_COMPONENTS */
-/* reuse GL_COLOR_RENDERABLE */
-/* reuse GL_DEPTH_RENDERABLE */
-/* reuse GL_STENCIL_RENDERABLE */
-/* reuse GL_FRAMEBUFFER_RENDERABLE */
-/* reuse GL_FRAMEBUFFER_RENDERABLE_LAYERED */
-/* reuse GL_FRAMEBUFFER_BLEND */
-/* reuse GL_READ_PIXELS */
-/* reuse GL_READ_PIXELS_FORMAT */
-/* reuse GL_READ_PIXELS_TYPE */
-/* reuse GL_TEXTURE_IMAGE_FORMAT */
-/* reuse GL_TEXTURE_IMAGE_TYPE */
-/* reuse GL_GET_TEXTURE_IMAGE_FORMAT */
-/* reuse GL_GET_TEXTURE_IMAGE_TYPE */
-/* reuse GL_MIPMAP */
-/* reuse GL_MANUAL_GENERATE_MIPMAP */
-/* reuse GL_AUTO_GENERATE_MIPMAP */
-/* reuse GL_COLOR_ENCODING */
-/* reuse GL_SRGB_READ */
-/* reuse GL_SRGB_WRITE */
-/* reuse GL_FILTER */
-/* reuse GL_VERTEX_TEXTURE */
-/* reuse GL_TESS_CONTROL_TEXTURE */
-/* reuse GL_TESS_EVALUATION_TEXTURE */
-/* reuse GL_GEOMETRY_TEXTURE */
-/* reuse GL_FRAGMENT_TEXTURE */
-/* reuse GL_COMPUTE_TEXTURE */
-/* reuse GL_TEXTURE_SHADOW */
-/* reuse GL_TEXTURE_GATHER */
-/* reuse GL_TEXTURE_GATHER_SHADOW */
-/* reuse GL_SHADER_IMAGE_LOAD */
-/* reuse GL_SHADER_IMAGE_STORE */
-/* reuse GL_SHADER_IMAGE_ATOMIC */
-/* reuse GL_IMAGE_TEXEL_SIZE */
-/* reuse GL_IMAGE_COMPATIBILITY_CLASS */
-/* reuse GL_IMAGE_PIXEL_FORMAT */
-/* reuse GL_IMAGE_PIXEL_TYPE */
-/* reuse GL_SIMULTANEOUS_TEXTURE_AND_DEPTH_TEST */
-/* reuse GL_SIMULTANEOUS_TEXTURE_AND_STENCIL_TEST */
-/* reuse GL_SIMULTANEOUS_TEXTURE_AND_DEPTH_WRITE */
-/* reuse GL_SIMULTANEOUS_TEXTURE_AND_STENCIL_WRITE */
-/* reuse GL_TEXTURE_COMPRESSED_BLOCK_WIDTH */
-/* reuse GL_TEXTURE_COMPRESSED_BLOCK_HEIGHT */
-/* reuse GL_TEXTURE_COMPRESSED_BLOCK_SIZE */
-/* reuse GL_CLEAR_BUFFER */
-/* reuse GL_TEXTURE_VIEW */
-/* reuse GL_VIEW_COMPATIBILITY_CLASS */
-/* reuse GL_FULL_SUPPORT */
-/* reuse GL_CAVEAT_SUPPORT */
-/* reuse GL_IMAGE_CLASS_4_X_32 */
-/* reuse GL_IMAGE_CLASS_2_X_32 */
-/* reuse GL_IMAGE_CLASS_1_X_32 */
-/* reuse GL_IMAGE_CLASS_4_X_16 */
-/* reuse GL_IMAGE_CLASS_2_X_16 */
-/* reuse GL_IMAGE_CLASS_1_X_16 */
-/* reuse GL_IMAGE_CLASS_4_X_8 */
-/* reuse GL_IMAGE_CLASS_2_X_8 */
-/* reuse GL_IMAGE_CLASS_1_X_8 */
-/* reuse GL_IMAGE_CLASS_11_11_10 */
-/* reuse GL_IMAGE_CLASS_10_10_10_2 */
-/* reuse GL_VIEW_CLASS_128_BITS */
-/* reuse GL_VIEW_CLASS_96_BITS */
-/* reuse GL_VIEW_CLASS_64_BITS */
-/* reuse GL_VIEW_CLASS_48_BITS */
-/* reuse GL_VIEW_CLASS_32_BITS */
-/* reuse GL_VIEW_CLASS_24_BITS */
-/* reuse GL_VIEW_CLASS_16_BITS */
-/* reuse GL_VIEW_CLASS_8_BITS */
-/* reuse GL_VIEW_CLASS_S3TC_DXT1_RGB */
-/* reuse GL_VIEW_CLASS_S3TC_DXT1_RGBA */
-/* reuse GL_VIEW_CLASS_S3TC_DXT3_RGBA */
-/* reuse GL_VIEW_CLASS_S3TC_DXT5_RGBA */
-/* reuse GL_VIEW_CLASS_RGTC1_RED */
-/* reuse GL_VIEW_CLASS_RGTC2_RG */
-/* reuse GL_VIEW_CLASS_BPTC_UNORM */
-/* reuse GL_VIEW_CLASS_BPTC_FLOAT */
-/* Reuse tokens from ARB_invalidate_subdata (none) */
-/* Reuse tokens from ARB_multi_draw_indirect (none) */
-/* Reuse tokens from ARB_program_interface_query */
-/* reuse GL_UNIFORM */
-/* reuse GL_UNIFORM_BLOCK */
-/* reuse GL_PROGRAM_INPUT */
-/* reuse GL_PROGRAM_OUTPUT */
-/* reuse GL_BUFFER_VARIABLE */
-/* reuse GL_SHADER_STORAGE_BLOCK */
-/* reuse GL_VERTEX_SUBROUTINE */
-/* reuse GL_TESS_CONTROL_SUBROUTINE */
-/* reuse GL_TESS_EVALUATION_SUBROUTINE */
-/* reuse GL_GEOMETRY_SUBROUTINE */
-/* reuse GL_FRAGMENT_SUBROUTINE */
-/* reuse GL_COMPUTE_SUBROUTINE */
-/* reuse GL_VERTEX_SUBROUTINE_UNIFORM */
-/* reuse GL_TESS_CONTROL_SUBROUTINE_UNIFORM */
-/* reuse GL_TESS_EVALUATION_SUBROUTINE_UNIFORM */
-/* reuse GL_GEOMETRY_SUBROUTINE_UNIFORM */
-/* reuse GL_FRAGMENT_SUBROUTINE_UNIFORM */
-/* reuse GL_COMPUTE_SUBROUTINE_UNIFORM */
-/* reuse GL_TRANSFORM_FEEDBACK_VARYING */
-/* reuse GL_ACTIVE_RESOURCES */
-/* reuse GL_MAX_NAME_LENGTH */
-/* reuse GL_MAX_NUM_ACTIVE_VARIABLES */
-/* reuse GL_MAX_NUM_COMPATIBLE_SUBROUTINES */
-/* reuse GL_NAME_LENGTH */
-/* reuse GL_TYPE */
-/* reuse GL_ARRAY_SIZE */
-/* reuse GL_OFFSET */
-/* reuse GL_BLOCK_INDEX */
-/* reuse GL_ARRAY_STRIDE */
-/* reuse GL_MATRIX_STRIDE */
-/* reuse GL_IS_ROW_MAJOR */
-/* reuse GL_ATOMIC_COUNTER_BUFFER_INDEX */
-/* reuse GL_BUFFER_BINDING */
-/* reuse GL_BUFFER_DATA_SIZE */
-/* reuse GL_NUM_ACTIVE_VARIABLES */
-/* reuse GL_ACTIVE_VARIABLES */
-/* reuse GL_REFERENCED_BY_VERTEX_SHADER */
-/* reuse GL_REFERENCED_BY_TESS_CONTROL_SHADER */
-/* reuse GL_REFERENCED_BY_TESS_EVALUATION_SHADER */
-/* reuse GL_REFERENCED_BY_GEOMETRY_SHADER */
-/* reuse GL_REFERENCED_BY_FRAGMENT_SHADER */
-/* reuse GL_REFERENCED_BY_COMPUTE_SHADER */
-/* reuse GL_TOP_LEVEL_ARRAY_SIZE */
-/* reuse GL_TOP_LEVEL_ARRAY_STRIDE */
-/* reuse GL_LOCATION */
-/* reuse GL_LOCATION_INDEX */
-/* reuse GL_IS_PER_PATCH */
-/* Reuse tokens from ARB_robust_buffer_access_behavior (none) */
-/* Reuse tokens from ARB_shader_storage_buffer_object */
-/* reuse GL_SHADER_STORAGE_BUFFER */
-/* reuse GL_SHADER_STORAGE_BUFFER_BINDING */
-/* reuse GL_SHADER_STORAGE_BUFFER_START */
-/* reuse GL_SHADER_STORAGE_BUFFER_SIZE */
-/* reuse GL_MAX_VERTEX_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_GEOMETRY_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_TESS_CONTROL_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_TESS_EVALUATION_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_FRAGMENT_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_COMPUTE_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_COMBINED_SHADER_STORAGE_BLOCKS */
-/* reuse GL_MAX_SHADER_STORAGE_BUFFER_BINDINGS */
-/* reuse GL_MAX_SHADER_STORAGE_BLOCK_SIZE */
-/* reuse GL_SHADER_STORAGE_BUFFER_OFFSET_ALIGNMENT */
-/* reuse GL_SHADER_STORAGE_BARRIER_BIT */
-/* reuse GL_MAX_COMBINED_SHADER_OUTPUT_RESOURCES */
-/* Reuse tokens from ARB_stencil_texturing */
-/* reuse GL_DEPTH_STENCIL_TEXTURE_MODE */
-/* Reuse tokens from ARB_texture_buffer_range */
-/* reuse GL_TEXTURE_BUFFER_OFFSET */
-/* reuse GL_TEXTURE_BUFFER_SIZE */
-/* reuse GL_TEXTURE_BUFFER_OFFSET_ALIGNMENT */
-/* Reuse tokens from ARB_texture_query_levels (none) */
-/* Reuse tokens from ARB_texture_storage_multisample (none) */
-/* Reuse tokens from ARB_texture_view */
-/* reuse GL_TEXTURE_VIEW_MIN_LEVEL */
-/* reuse GL_TEXTURE_VIEW_NUM_LEVELS */
-/* reuse GL_TEXTURE_VIEW_MIN_LAYER */
-/* reuse GL_TEXTURE_VIEW_NUM_LAYERS */
-/* reuse GL_TEXTURE_IMMUTABLE_LEVELS */
-/* Reuse tokens from ARB_vertex_attrib_binding */
-/* reuse GL_VERTEX_ATTRIB_BINDING */
-/* reuse GL_VERTEX_ATTRIB_RELATIVE_OFFSET */
-/* reuse GL_VERTEX_BINDING_DIVISOR */
-/* reuse GL_VERTEX_BINDING_OFFSET */
-/* reuse GL_VERTEX_BINDING_STRIDE */
-/* reuse GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET */
-/* reuse GL_MAX_VERTEX_ATTRIB_BINDINGS */
-#endif
-
-#ifndef GL_ARB_multitexture
-#define GL_TEXTURE0_ARB                   0x84C0
-#define GL_TEXTURE1_ARB                   0x84C1
-#define GL_TEXTURE2_ARB                   0x84C2
-#define GL_TEXTURE3_ARB                   0x84C3
-#define GL_TEXTURE4_ARB                   0x84C4
-#define GL_TEXTURE5_ARB                   0x84C5
-#define GL_TEXTURE6_ARB                   0x84C6
-#define GL_TEXTURE7_ARB                   0x84C7
-#define GL_TEXTURE8_ARB                   0x84C8
-#define GL_TEXTURE9_ARB                   0x84C9
-#define GL_TEXTURE10_ARB                  0x84CA
-#define GL_TEXTURE11_ARB                  0x84CB
-#define GL_TEXTURE12_ARB                  0x84CC
-#define GL_TEXTURE13_ARB                  0x84CD
-#define GL_TEXTURE14_ARB                  0x84CE
-#define GL_TEXTURE15_ARB                  0x84CF
-#define GL_TEXTURE16_ARB                  0x84D0
-#define GL_TEXTURE17_ARB                  0x84D1
-#define GL_TEXTURE18_ARB                  0x84D2
-#define GL_TEXTURE19_ARB                  0x84D3
-#define GL_TEXTURE20_ARB                  0x84D4
-#define GL_TEXTURE21_ARB                  0x84D5
-#define GL_TEXTURE22_ARB                  0x84D6
-#define GL_TEXTURE23_ARB                  0x84D7
-#define GL_TEXTURE24_ARB                  0x84D8
-#define GL_TEXTURE25_ARB                  0x84D9
-#define GL_TEXTURE26_ARB                  0x84DA
-#define GL_TEXTURE27_ARB                  0x84DB
-#define GL_TEXTURE28_ARB                  0x84DC
-#define GL_TEXTURE29_ARB                  0x84DD
-#define GL_TEXTURE30_ARB                  0x84DE
-#define GL_TEXTURE31_ARB                  0x84DF
-#define GL_ACTIVE_TEXTURE_ARB             0x84E0
-#define GL_CLIENT_ACTIVE_TEXTURE_ARB      0x84E1
-#define GL_MAX_TEXTURE_UNITS_ARB          0x84E2
-#endif
-
-#ifndef GL_ARB_transpose_matrix
-#define GL_TRANSPOSE_MODELVIEW_MATRIX_ARB 0x84E3
-#define GL_TRANSPOSE_PROJECTION_MATRIX_ARB 0x84E4
-#define GL_TRANSPOSE_TEXTURE_MATRIX_ARB   0x84E5
-#define GL_TRANSPOSE_COLOR_MATRIX_ARB     0x84E6
-#endif
-
-#ifndef GL_ARB_multisample
-#define GL_MULTISAMPLE_ARB                0x809D
-#define GL_SAMPLE_ALPHA_TO_COVERAGE_ARB   0x809E
-#define GL_SAMPLE_ALPHA_TO_ONE_ARB        0x809F
-#define GL_SAMPLE_COVERAGE_ARB            0x80A0
-#define GL_SAMPLE_BUFFERS_ARB             0x80A8
-#define GL_SAMPLES_ARB                    0x80A9
-#define GL_SAMPLE_COVERAGE_VALUE_ARB      0x80AA
-#define GL_SAMPLE_COVERAGE_INVERT_ARB     0x80AB
-#define GL_MULTISAMPLE_BIT_ARB            0x20000000
-#endif
-
-#ifndef GL_ARB_texture_env_add
-#endif
-
-#ifndef GL_ARB_texture_cube_map
-#define GL_NORMAL_MAP_ARB                 0x8511
-#define GL_REFLECTION_MAP_ARB             0x8512
-#define GL_TEXTURE_CUBE_MAP_ARB           0x8513
-#define GL_TEXTURE_BINDING_CUBE_MAP_ARB   0x8514
-#define GL_TEXTURE_CUBE_MAP_POSITIVE_X_ARB 0x8515
-#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X_ARB 0x8516
-#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y_ARB 0x8517
-#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_ARB 0x8518
-#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z_ARB 0x8519
-#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_ARB 0x851A
-#define GL_PROXY_TEXTURE_CUBE_MAP_ARB     0x851B
-#define GL_MAX_CUBE_MAP_TEXTURE_SIZE_ARB  0x851C
-#endif
-
-#ifndef GL_ARB_texture_compression
-#define GL_COMPRESSED_ALPHA_ARB           0x84E9
-#define GL_COMPRESSED_LUMINANCE_ARB       0x84EA
-#define GL_COMPRESSED_LUMINANCE_ALPHA_ARB 0x84EB
-#define GL_COMPRESSED_INTENSITY_ARB       0x84EC
-#define GL_COMPRESSED_RGB_ARB             0x84ED
-#define GL_COMPRESSED_RGBA_ARB            0x84EE
-#define GL_TEXTURE_COMPRESSION_HINT_ARB   0x84EF
-#define GL_TEXTURE_COMPRESSED_IMAGE_SIZE_ARB 0x86A0
-#define GL_TEXTURE_COMPRESSED_ARB         0x86A1
-#define GL_NUM_COMPRESSED_TEXTURE_FORMATS_ARB 0x86A2
-#define GL_COMPRESSED_TEXTURE_FORMATS_ARB 0x86A3
-#endif
-
-#ifndef GL_ARB_texture_border_clamp
-#define GL_CLAMP_TO_BORDER_ARB            0x812D
-#endif
-
-#ifndef GL_ARB_point_parameters
-#define GL_POINT_SIZE_MIN_ARB             0x8126
-#define GL_POINT_SIZE_MAX_ARB             0x8127
-#define GL_POINT_FADE_THRESHOLD_SIZE_ARB  0x8128
-#define GL_POINT_DISTANCE_ATTENUATION_ARB 0x8129
-#endif
-
-#ifndef GL_ARB_vertex_blend
-#define GL_MAX_VERTEX_UNITS_ARB           0x86A4
-#define GL_ACTIVE_VERTEX_UNITS_ARB        0x86A5
-#define GL_WEIGHT_SUM_UNITY_ARB           0x86A6
-#define GL_VERTEX_BLEND_ARB               0x86A7
-#define GL_CURRENT_WEIGHT_ARB             0x86A8
-#define GL_WEIGHT_ARRAY_TYPE_ARB          0x86A9
-#define GL_WEIGHT_ARRAY_STRIDE_ARB        0x86AA
-#define GL_WEIGHT_ARRAY_SIZE_ARB          0x86AB
-#define GL_WEIGHT_ARRAY_POINTER_ARB       0x86AC
-#define GL_WEIGHT_ARRAY_ARB               0x86AD
-#define GL_MODELVIEW0_ARB                 0x1700
-#define GL_MODELVIEW1_ARB                 0x850A
-#define GL_MODELVIEW2_ARB                 0x8722
-#define GL_MODELVIEW3_ARB                 0x8723
-#define GL_MODELVIEW4_ARB                 0x8724
-#define GL_MODELVIEW5_ARB                 0x8725
-#define GL_MODELVIEW6_ARB                 0x8726
-#define GL_MODELVIEW7_ARB                 0x8727
-#define GL_MODELVIEW8_ARB                 0x8728
-#define GL_MODELVIEW9_ARB                 0x8729
-#define GL_MODELVIEW10_ARB                0x872A
-#define GL_MODELVIEW11_ARB                0x872B
-#define GL_MODELVIEW12_ARB                0x872C
-#define GL_MODELVIEW13_ARB                0x872D
-#define GL_MODELVIEW14_ARB                0x872E
-#define GL_MODELVIEW15_ARB                0x872F
-#define GL_MODELVIEW16_ARB                0x8730
-#define GL_MODELVIEW17_ARB                0x8731
-#define GL_MODELVIEW18_ARB                0x8732
-#define GL_MODELVIEW19_ARB                0x8733
-#define GL_MODELVIEW20_ARB                0x8734
-#define GL_MODELVIEW21_ARB                0x8735
-#define GL_MODELVIEW22_ARB                0x8736
-#define GL_MODELVIEW23_ARB                0x8737
-#define GL_MODELVIEW24_ARB                0x8738
-#define GL_MODELVIEW25_ARB                0x8739
-#define GL_MODELVIEW26_ARB                0x873A
-#define GL_MODELVIEW27_ARB                0x873B
-#define GL_MODELVIEW28_ARB                0x873C
-#define GL_MODELVIEW29_ARB                0x873D
-#define GL_MODELVIEW30_ARB                0x873E
-#define GL_MODELVIEW31_ARB                0x873F
-#endif
-
-#ifndef GL_ARB_matrix_palette
-#define GL_MATRIX_PALETTE_ARB             0x8840
-#define GL_MAX_MATRIX_PALETTE_STACK_DEPTH_ARB 0x8841
-#define GL_MAX_PALETTE_MATRICES_ARB       0x8842
-#define GL_CURRENT_PALETTE_MATRIX_ARB     0x8843
-#define GL_MATRIX_INDEX_ARRAY_ARB         0x8844
-#define GL_CURRENT_MATRIX_INDEX_ARB       0x8845
-#define GL_MATRIX_INDEX_ARRAY_SIZE_ARB    0x8846
-#define GL_MATRIX_INDEX_ARRAY_TYPE_ARB    0x8847
-#define GL_MATRIX_INDEX_ARRAY_STRIDE_ARB  0x8848
-#define GL_MATRIX_INDEX_ARRAY_POINTER_ARB 0x8849
-#endif
-
-#ifndef GL_ARB_texture_env_combine
-#define GL_COMBINE_ARB                    0x8570
-#define GL_COMBINE_RGB_ARB                0x8571
-#define GL_COMBINE_ALPHA_ARB              0x8572
-#define GL_SOURCE0_RGB_ARB                0x8580
-#define GL_SOURCE1_RGB_ARB                0x8581
-#define GL_SOURCE2_RGB_ARB                0x8582
-#define GL_SOURCE0_ALPHA_ARB              0x8588
-#define GL_SOURCE1_ALPHA_ARB              0x8589
-#define GL_SOURCE2_ALPHA_ARB              0x858A
-#define GL_OPERAND0_RGB_ARB               0x8590
-#define GL_OPERAND1_RGB_ARB               0x8591
-#define GL_OPERAND2_RGB_ARB               0x8592
-#define GL_OPERAND0_ALPHA_ARB             0x8598
-#define GL_OPERAND1_ALPHA_ARB             0x8599
-#define GL_OPERAND2_ALPHA_ARB             0x859A
-#define GL_RGB_SCALE_ARB                  0x8573
-#define GL_ADD_SIGNED_ARB                 0x8574
-#define GL_INTERPOLATE_ARB                0x8575
-#define GL_SUBTRACT_ARB                   0x84E7
-#define GL_CONSTANT_ARB                   0x8576
-#define GL_PRIMARY_COLOR_ARB              0x8577
-#define GL_PREVIOUS_ARB                   0x8578
-#endif
-
-#ifndef GL_ARB_texture_env_crossbar
-#endif
-
-#ifndef GL_ARB_texture_env_dot3
-#define GL_DOT3_RGB_ARB                   0x86AE
-#define GL_DOT3_RGBA_ARB                  0x86AF
-#endif
-
-#ifndef GL_ARB_texture_mirrored_repeat
-#define GL_MIRRORED_REPEAT_ARB            0x8370
-#endif
-
-#ifndef GL_ARB_depth_texture
-#define GL_DEPTH_COMPONENT16_ARB          0x81A5
-#define GL_DEPTH_COMPONENT24_ARB          0x81A6
-#define GL_DEPTH_COMPONENT32_ARB          0x81A7
-#define GL_TEXTURE_DEPTH_SIZE_ARB         0x884A
-#define GL_DEPTH_TEXTURE_MODE_ARB         0x884B
-#endif
-
-#ifndef GL_ARB_shadow
-#define GL_TEXTURE_COMPARE_MODE_ARB       0x884C
-#define GL_TEXTURE_COMPARE_FUNC_ARB       0x884D
-#define GL_COMPARE_R_TO_TEXTURE_ARB       0x884E
-#endif
-
-#ifndef GL_ARB_shadow_ambient
-#define GL_TEXTURE_COMPARE_FAIL_VALUE_ARB 0x80BF
-#endif
-
-#ifndef GL_ARB_window_pos
-#endif
-
-#ifndef GL_ARB_vertex_program
-#define GL_COLOR_SUM_ARB                  0x8458
-#define GL_VERTEX_PROGRAM_ARB             0x8620
-#define GL_VERTEX_ATTRIB_ARRAY_ENABLED_ARB 0x8622
-#define GL_VERTEX_ATTRIB_ARRAY_SIZE_ARB   0x8623
-#define GL_VERTEX_ATTRIB_ARRAY_STRIDE_ARB 0x8624
-#define GL_VERTEX_ATTRIB_ARRAY_TYPE_ARB   0x8625
-#define GL_CURRENT_VERTEX_ATTRIB_ARB      0x8626
-#define GL_PROGRAM_LENGTH_ARB             0x8627
-#define GL_PROGRAM_STRING_ARB             0x8628
-#define GL_MAX_PROGRAM_MATRIX_STACK_DEPTH_ARB 0x862E
-#define GL_MAX_PROGRAM_MATRICES_ARB       0x862F
-#define GL_CURRENT_MATRIX_STACK_DEPTH_ARB 0x8640
-#define GL_CURRENT_MATRIX_ARB             0x8641
-#define GL_VERTEX_PROGRAM_POINT_SIZE_ARB  0x8642
-#define GL_VERTEX_PROGRAM_TWO_SIDE_ARB    0x8643
-#define GL_VERTEX_ATTRIB_ARRAY_POINTER_ARB 0x8645
-#define GL_PROGRAM_ERROR_POSITION_ARB     0x864B
-#define GL_PROGRAM_BINDING_ARB            0x8677
-#define GL_MAX_VERTEX_ATTRIBS_ARB         0x8869
-#define GL_VERTEX_ATTRIB_ARRAY_NORMALIZED_ARB 0x886A
-#define GL_PROGRAM_ERROR_STRING_ARB       0x8874
-#define GL_PROGRAM_FORMAT_ASCII_ARB       0x8875
-#define GL_PROGRAM_FORMAT_ARB             0x8876
-#define GL_PROGRAM_INSTRUCTIONS_ARB       0x88A0
-#define GL_MAX_PROGRAM_INSTRUCTIONS_ARB   0x88A1
-#define GL_PROGRAM_NATIVE_INSTRUCTIONS_ARB 0x88A2
-#define GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB 0x88A3
-#define GL_PROGRAM_TEMPORARIES_ARB        0x88A4
-#define GL_MAX_PROGRAM_TEMPORARIES_ARB    0x88A5
-#define GL_PROGRAM_NATIVE_TEMPORARIES_ARB 0x88A6
-#define GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB 0x88A7
-#define GL_PROGRAM_PARAMETERS_ARB         0x88A8
-#define GL_MAX_PROGRAM_PARAMETERS_ARB     0x88A9
-#define GL_PROGRAM_NATIVE_PARAMETERS_ARB  0x88AA
-#define GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB 0x88AB
-#define GL_PROGRAM_ATTRIBS_ARB            0x88AC
-#define GL_MAX_PROGRAM_ATTRIBS_ARB        0x88AD
-#define GL_PROGRAM_NATIVE_ATTRIBS_ARB     0x88AE
-#define GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB 0x88AF
-#define GL_PROGRAM_ADDRESS_REGISTERS_ARB  0x88B0
-#define GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB 0x88B1
-#define GL_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB 0x88B2
-#define GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB 0x88B3
-#define GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB 0x88B4
-#define GL_MAX_PROGRAM_ENV_PARAMETERS_ARB 0x88B5
-#define GL_PROGRAM_UNDER_NATIVE_LIMITS_ARB 0x88B6
-#define GL_TRANSPOSE_CURRENT_MATRIX_ARB   0x88B7
-#define GL_MATRIX0_ARB                    0x88C0
-#define GL_MATRIX1_ARB                    0x88C1
-#define GL_MATRIX2_ARB                    0x88C2
-#define GL_MATRIX3_ARB                    0x88C3
-#define GL_MATRIX4_ARB                    0x88C4
-#define GL_MATRIX5_ARB                    0x88C5
-#define GL_MATRIX6_ARB                    0x88C6
-#define GL_MATRIX7_ARB                    0x88C7
-#define GL_MATRIX8_ARB                    0x88C8
-#define GL_MATRIX9_ARB                    0x88C9
-#define GL_MATRIX10_ARB                   0x88CA
-#define GL_MATRIX11_ARB                   0x88CB
-#define GL_MATRIX12_ARB                   0x88CC
-#define GL_MATRIX13_ARB                   0x88CD
-#define GL_MATRIX14_ARB                   0x88CE
-#define GL_MATRIX15_ARB                   0x88CF
-#define GL_MATRIX16_ARB                   0x88D0
-#define GL_MATRIX17_ARB                   0x88D1
-#define GL_MATRIX18_ARB                   0x88D2
-#define GL_MATRIX19_ARB                   0x88D3
-#define GL_MATRIX20_ARB                   0x88D4
-#define GL_MATRIX21_ARB                   0x88D5
-#define GL_MATRIX22_ARB                   0x88D6
-#define GL_MATRIX23_ARB                   0x88D7
-#define GL_MATRIX24_ARB                   0x88D8
-#define GL_MATRIX25_ARB                   0x88D9
-#define GL_MATRIX26_ARB                   0x88DA
-#define GL_MATRIX27_ARB                   0x88DB
-#define GL_MATRIX28_ARB                   0x88DC
-#define GL_MATRIX29_ARB                   0x88DD
-#define GL_MATRIX30_ARB                   0x88DE
-#define GL_MATRIX31_ARB                   0x88DF
-#endif
-
-#ifndef GL_ARB_fragment_program
-#define GL_FRAGMENT_PROGRAM_ARB           0x8804
-#define GL_PROGRAM_ALU_INSTRUCTIONS_ARB   0x8805
-#define GL_PROGRAM_TEX_INSTRUCTIONS_ARB   0x8806
-#define GL_PROGRAM_TEX_INDIRECTIONS_ARB   0x8807
-#define GL_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB 0x8808
-#define GL_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB 0x8809
-#define GL_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB 0x880A
-#define GL_MAX_PROGRAM_ALU_INSTRUCTIONS_ARB 0x880B
-#define GL_MAX_PROGRAM_TEX_INSTRUCTIONS_ARB 0x880C
-#define GL_MAX_PROGRAM_TEX_INDIRECTIONS_ARB 0x880D
-#define GL_MAX_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB 0x880E
-#define GL_MAX_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB 0x880F
-#define GL_MAX_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB 0x8810
-#define GL_MAX_TEXTURE_COORDS_ARB         0x8871
-#define GL_MAX_TEXTURE_IMAGE_UNITS_ARB    0x8872
-#endif
-
-#ifndef GL_ARB_vertex_buffer_object
-#define GL_BUFFER_SIZE_ARB                0x8764
-#define GL_BUFFER_USAGE_ARB               0x8765
-#define GL_ARRAY_BUFFER_ARB               0x8892
-#define GL_ELEMENT_ARRAY_BUFFER_ARB       0x8893
-#define GL_ARRAY_BUFFER_BINDING_ARB       0x8894
-#define GL_ELEMENT_ARRAY_BUFFER_BINDING_ARB 0x8895
-#define GL_VERTEX_ARRAY_BUFFER_BINDING_ARB 0x8896
-#define GL_NORMAL_ARRAY_BUFFER_BINDING_ARB 0x8897
-#define GL_COLOR_ARRAY_BUFFER_BINDING_ARB 0x8898
-#define GL_INDEX_ARRAY_BUFFER_BINDING_ARB 0x8899
-#define GL_TEXTURE_COORD_ARRAY_BUFFER_BINDING_ARB 0x889A
-#define GL_EDGE_FLAG_ARRAY_BUFFER_BINDING_ARB 0x889B
-#define GL_SECONDARY_COLOR_ARRAY_BUFFER_BINDING_ARB 0x889C
-#define GL_FOG_COORDINATE_ARRAY_BUFFER_BINDING_ARB 0x889D
-#define GL_WEIGHT_ARRAY_BUFFER_BINDING_ARB 0x889E
-#define GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING_ARB 0x889F
-#define GL_READ_ONLY_ARB                  0x88B8
-#define GL_WRITE_ONLY_ARB                 0x88B9
-#define GL_READ_WRITE_ARB                 0x88BA
-#define GL_BUFFER_ACCESS_ARB              0x88BB
-#define GL_BUFFER_MAPPED_ARB              0x88BC
-#define GL_BUFFER_MAP_POINTER_ARB         0x88BD
-#define GL_STREAM_DRAW_ARB                0x88E0
-#define GL_STREAM_READ_ARB                0x88E1
-#define GL_STREAM_COPY_ARB                0x88E2
-#define GL_STATIC_DRAW_ARB                0x88E4
-#define GL_STATIC_READ_ARB                0x88E5
-#define GL_STATIC_COPY_ARB                0x88E6
-#define GL_DYNAMIC_DRAW_ARB               0x88E8
-#define GL_DYNAMIC_READ_ARB               0x88E9
-#define GL_DYNAMIC_COPY_ARB               0x88EA
-#endif
-
-#ifndef GL_ARB_occlusion_query
-#define GL_QUERY_COUNTER_BITS_ARB         0x8864
-#define GL_CURRENT_QUERY_ARB              0x8865
-#define GL_QUERY_RESULT_ARB               0x8866
-#define GL_QUERY_RESULT_AVAILABLE_ARB     0x8867
-#define GL_SAMPLES_PASSED_ARB             0x8914
-#endif
-
-#ifndef GL_ARB_shader_objects
-#define GL_PROGRAM_OBJECT_ARB             0x8B40
-#define GL_SHADER_OBJECT_ARB              0x8B48
-#define GL_OBJECT_TYPE_ARB                0x8B4E
-#define GL_OBJECT_SUBTYPE_ARB             0x8B4F
-#define GL_FLOAT_VEC2_ARB                 0x8B50
-#define GL_FLOAT_VEC3_ARB                 0x8B51
-#define GL_FLOAT_VEC4_ARB                 0x8B52
-#define GL_INT_VEC2_ARB                   0x8B53
-#define GL_INT_VEC3_ARB                   0x8B54
-#define GL_INT_VEC4_ARB                   0x8B55
-#define GL_BOOL_ARB                       0x8B56
-#define GL_BOOL_VEC2_ARB                  0x8B57
-#define GL_BOOL_VEC3_ARB                  0x8B58
-#define GL_BOOL_VEC4_ARB                  0x8B59
-#define GL_FLOAT_MAT2_ARB                 0x8B5A
-#define GL_FLOAT_MAT3_ARB                 0x8B5B
-#define GL_FLOAT_MAT4_ARB                 0x8B5C
-#define GL_SAMPLER_1D_ARB                 0x8B5D
-#define GL_SAMPLER_2D_ARB                 0x8B5E
-#define GL_SAMPLER_3D_ARB                 0x8B5F
-#define GL_SAMPLER_CUBE_ARB               0x8B60
-#define GL_SAMPLER_1D_SHADOW_ARB          0x8B61
-#define GL_SAMPLER_2D_SHADOW_ARB          0x8B62
-#define GL_SAMPLER_2D_RECT_ARB            0x8B63
-#define GL_SAMPLER_2D_RECT_SHADOW_ARB     0x8B64
-#define GL_OBJECT_DELETE_STATUS_ARB       0x8B80
-#define GL_OBJECT_COMPILE_STATUS_ARB      0x8B81
-#define GL_OBJECT_LINK_STATUS_ARB         0x8B82
-#define GL_OBJECT_VALIDATE_STATUS_ARB     0x8B83
-#define GL_OBJECT_INFO_LOG_LENGTH_ARB     0x8B84
-#define GL_OBJECT_ATTACHED_OBJECTS_ARB    0x8B85
-#define GL_OBJECT_ACTIVE_UNIFORMS_ARB     0x8B86
-#define GL_OBJECT_ACTIVE_UNIFORM_MAX_LENGTH_ARB 0x8B87
-#define GL_OBJECT_SHADER_SOURCE_LENGTH_ARB 0x8B88
-#endif
-
-#ifndef GL_ARB_vertex_shader
-#define GL_VERTEX_SHADER_ARB              0x8B31
-#define GL_MAX_VERTEX_UNIFORM_COMPONENTS_ARB 0x8B4A
-#define GL_MAX_VARYING_FLOATS_ARB         0x8B4B
-#define GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS_ARB 0x8B4C
-#define GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS_ARB 0x8B4D
-#define GL_OBJECT_ACTIVE_ATTRIBUTES_ARB   0x8B89
-#define GL_OBJECT_ACTIVE_ATTRIBUTE_MAX_LENGTH_ARB 0x8B8A
-#endif
-
-#ifndef GL_ARB_fragment_shader
-#define GL_FRAGMENT_SHADER_ARB            0x8B30
-#define GL_MAX_FRAGMENT_UNIFORM_COMPONENTS_ARB 0x8B49
-#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT_ARB 0x8B8B
-#endif
-
-#ifndef GL_ARB_shading_language_100
-#define GL_SHADING_LANGUAGE_VERSION_ARB   0x8B8C
-#endif
-
-#ifndef GL_ARB_texture_non_power_of_two
-#endif
-
-#ifndef GL_ARB_point_sprite
-#define GL_POINT_SPRITE_ARB               0x8861
-#define GL_COORD_REPLACE_ARB              0x8862
-#endif
-
-#ifndef GL_ARB_fragment_program_shadow
-#endif
-
-#ifndef GL_ARB_draw_buffers
-#define GL_MAX_DRAW_BUFFERS_ARB           0x8824
-#define GL_DRAW_BUFFER0_ARB               0x8825
-#define GL_DRAW_BUFFER1_ARB               0x8826
-#define GL_DRAW_BUFFER2_ARB               0x8827
-#define GL_DRAW_BUFFER3_ARB               0x8828
-#define GL_DRAW_BUFFER4_ARB               0x8829
-#define GL_DRAW_BUFFER5_ARB               0x882A
-#define GL_DRAW_BUFFER6_ARB               0x882B
-#define GL_DRAW_BUFFER7_ARB               0x882C
-#define GL_DRAW_BUFFER8_ARB               0x882D
-#define GL_DRAW_BUFFER9_ARB               0x882E
-#define GL_DRAW_BUFFER10_ARB              0x882F
-#define GL_DRAW_BUFFER11_ARB              0x8830
-#define GL_DRAW_BUFFER12_ARB              0x8831
-#define GL_DRAW_BUFFER13_ARB              0x8832
-#define GL_DRAW_BUFFER14_ARB              0x8833
-#define GL_DRAW_BUFFER15_ARB              0x8834
-#endif
-
-#ifndef GL_ARB_texture_rectangle
-#define GL_TEXTURE_RECTANGLE_ARB          0x84F5
-#define GL_TEXTURE_BINDING_RECTANGLE_ARB  0x84F6
-#define GL_PROXY_TEXTURE_RECTANGLE_ARB    0x84F7
-#define GL_MAX_RECTANGLE_TEXTURE_SIZE_ARB 0x84F8
-#endif
-
-#ifndef GL_ARB_color_buffer_float
-#define GL_RGBA_FLOAT_MODE_ARB            0x8820
-#define GL_CLAMP_VERTEX_COLOR_ARB         0x891A
-#define GL_CLAMP_FRAGMENT_COLOR_ARB       0x891B
-#define GL_CLAMP_READ_COLOR_ARB           0x891C
-#define GL_FIXED_ONLY_ARB                 0x891D
-#endif
-
-#ifndef GL_ARB_half_float_pixel
-#define GL_HALF_FLOAT_ARB                 0x140B
-#endif
-
-#ifndef GL_ARB_texture_float
-#define GL_TEXTURE_RED_TYPE_ARB           0x8C10
-#define GL_TEXTURE_GREEN_TYPE_ARB         0x8C11
-#define GL_TEXTURE_BLUE_TYPE_ARB          0x8C12
-#define GL_TEXTURE_ALPHA_TYPE_ARB         0x8C13
-#define GL_TEXTURE_LUMINANCE_TYPE_ARB     0x8C14
-#define GL_TEXTURE_INTENSITY_TYPE_ARB     0x8C15
-#define GL_TEXTURE_DEPTH_TYPE_ARB         0x8C16
-#define GL_UNSIGNED_NORMALIZED_ARB        0x8C17
-#define GL_RGBA32F_ARB                    0x8814
-#define GL_RGB32F_ARB                     0x8815
-#define GL_ALPHA32F_ARB                   0x8816
-#define GL_INTENSITY32F_ARB               0x8817
-#define GL_LUMINANCE32F_ARB               0x8818
-#define GL_LUMINANCE_ALPHA32F_ARB         0x8819
-#define GL_RGBA16F_ARB                    0x881A
-#define GL_RGB16F_ARB                     0x881B
-#define GL_ALPHA16F_ARB                   0x881C
-#define GL_INTENSITY16F_ARB               0x881D
-#define GL_LUMINANCE16F_ARB               0x881E
-#define GL_LUMINANCE_ALPHA16F_ARB         0x881F
-#endif
-
-#ifndef GL_ARB_pixel_buffer_object
-#define GL_PIXEL_PACK_BUFFER_ARB          0x88EB
-#define GL_PIXEL_UNPACK_BUFFER_ARB        0x88EC
-#define GL_PIXEL_PACK_BUFFER_BINDING_ARB  0x88ED
-#define GL_PIXEL_UNPACK_BUFFER_BINDING_ARB 0x88EF
-#endif
-
-#ifndef GL_ARB_depth_buffer_float
 #define GL_DEPTH_COMPONENT32F             0x8CAC
 #define GL_DEPTH32F_STENCIL8              0x8CAD
 #define GL_FLOAT_32_UNSIGNED_INT_24_8_REV 0x8DAD
-#endif
-
-#ifndef GL_ARB_draw_instanced
-#endif
-
-#ifndef GL_ARB_framebuffer_object
 #define GL_INVALID_FRAMEBUFFER_OPERATION  0x0506
 #define GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING 0x8210
 #define GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE 0x8211
@@ -1959,7 +1013,7 @@ extern "C" {
 #define GL_TEXTURE_DEPTH_TYPE             0x8C16
 #define GL_UNSIGNED_NORMALIZED            0x8C17
 #define GL_FRAMEBUFFER_BINDING            0x8CA6
-#define GL_DRAW_FRAMEBUFFER_BINDING       GL_FRAMEBUFFER_BINDING
+#define GL_DRAW_FRAMEBUFFER_BINDING       0x8CA6
 #define GL_RENDERBUFFER_BINDING           0x8CA7
 #define GL_READ_FRAMEBUFFER               0x8CA8
 #define GL_DRAW_FRAMEBUFFER               0x8CA9
@@ -2015,68 +1069,18 @@ extern "C" {
 #define GL_INDEX                          0x8222
 #define GL_TEXTURE_LUMINANCE_TYPE         0x8C14
 #define GL_TEXTURE_INTENSITY_TYPE         0x8C15
-#endif
-
-#ifndef GL_ARB_framebuffer_sRGB
 #define GL_FRAMEBUFFER_SRGB               0x8DB9
-#endif
-
-#ifndef GL_ARB_geometry_shader4
-#define GL_LINES_ADJACENCY_ARB            0x000A
-#define GL_LINE_STRIP_ADJACENCY_ARB       0x000B
-#define GL_TRIANGLES_ADJACENCY_ARB        0x000C
-#define GL_TRIANGLE_STRIP_ADJACENCY_ARB   0x000D
-#define GL_PROGRAM_POINT_SIZE_ARB         0x8642
-#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_ARB 0x8C29
-#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_ARB 0x8DA7
-#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_ARB 0x8DA8
-#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_ARB 0x8DA9
-#define GL_GEOMETRY_SHADER_ARB            0x8DD9
-#define GL_GEOMETRY_VERTICES_OUT_ARB      0x8DDA
-#define GL_GEOMETRY_INPUT_TYPE_ARB        0x8DDB
-#define GL_GEOMETRY_OUTPUT_TYPE_ARB       0x8DDC
-#define GL_MAX_GEOMETRY_VARYING_COMPONENTS_ARB 0x8DDD
-#define GL_MAX_VERTEX_VARYING_COMPONENTS_ARB 0x8DDE
-#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS_ARB 0x8DDF
-#define GL_MAX_GEOMETRY_OUTPUT_VERTICES_ARB 0x8DE0
-#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS_ARB 0x8DE1
-/* reuse GL_MAX_VARYING_COMPONENTS */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER */
-#endif
-
-#ifndef GL_ARB_half_float_vertex
 #define GL_HALF_FLOAT                     0x140B
-#endif
-
-#ifndef GL_ARB_instanced_arrays
-#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ARB 0x88FE
-#endif
-
-#ifndef GL_ARB_map_buffer_range
 #define GL_MAP_READ_BIT                   0x0001
 #define GL_MAP_WRITE_BIT                  0x0002
 #define GL_MAP_INVALIDATE_RANGE_BIT       0x0004
 #define GL_MAP_INVALIDATE_BUFFER_BIT      0x0008
 #define GL_MAP_FLUSH_EXPLICIT_BIT         0x0010
 #define GL_MAP_UNSYNCHRONIZED_BIT         0x0020
-#endif
-
-#ifndef GL_ARB_texture_buffer_object
-#define GL_TEXTURE_BUFFER_ARB             0x8C2A
-#define GL_MAX_TEXTURE_BUFFER_SIZE_ARB    0x8C2B
-#define GL_TEXTURE_BINDING_BUFFER_ARB     0x8C2C
-#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING_ARB 0x8C2D
-#define GL_TEXTURE_BUFFER_FORMAT_ARB      0x8C2E
-#endif
-
-#ifndef GL_ARB_texture_compression_rgtc
 #define GL_COMPRESSED_RED_RGTC1           0x8DBB
 #define GL_COMPRESSED_SIGNED_RED_RGTC1    0x8DBC
 #define GL_COMPRESSED_RG_RGTC2            0x8DBD
 #define GL_COMPRESSED_SIGNED_RG_RGTC2     0x8DBE
-#endif
-
-#ifndef GL_ARB_texture_rg
 #define GL_RG                             0x8227
 #define GL_RG_INTEGER                     0x8228
 #define GL_R8                             0x8229
@@ -2099,13 +1103,212 @@ extern "C" {
 #define GL_RG16UI                         0x823A
 #define GL_RG32I                          0x823B
 #define GL_RG32UI                         0x823C
-#endif
-
-#ifndef GL_ARB_vertex_array_object
 #define GL_VERTEX_ARRAY_BINDING           0x85B5
+#define GL_CLAMP_VERTEX_COLOR             0x891A
+#define GL_CLAMP_FRAGMENT_COLOR           0x891B
+#define GL_ALPHA_INTEGER                  0x8D97
+typedef void (APIENTRYP PFNGLCOLORMASKIPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
+typedef void (APIENTRYP PFNGLGETBOOLEANI_VPROC) (GLenum target, GLuint index, GLboolean *data);
+typedef void (APIENTRYP PFNGLGETINTEGERI_VPROC) (GLenum target, GLuint index, GLint *data);
+typedef void (APIENTRYP PFNGLENABLEIPROC) (GLenum target, GLuint index);
+typedef void (APIENTRYP PFNGLDISABLEIPROC) (GLenum target, GLuint index);
+typedef GLboolean (APIENTRYP PFNGLISENABLEDIPROC) (GLenum target, GLuint index);
+typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKPROC) (GLenum primitiveMode);
+typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKPROC) (void);
+typedef void (APIENTRYP PFNGLBINDBUFFERRANGEPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLBINDBUFFERBASEPROC) (GLenum target, GLuint index, GLuint buffer);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSPROC) (GLuint program, GLsizei count, const GLchar *const*varyings, GLenum bufferMode);
+typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
+typedef void (APIENTRYP PFNGLCLAMPCOLORPROC) (GLenum target, GLenum clamp);
+typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERPROC) (GLuint id, GLenum mode);
+typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERPROC) (void);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBIPOINTERPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIIVPROC) (GLuint index, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIUIVPROC) (GLuint index, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IPROC) (GLuint index, GLint x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IPROC) (GLuint index, GLint x, GLint y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IPROC) (GLuint index, GLint x, GLint y, GLint z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IPROC) (GLuint index, GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIPROC) (GLuint index, GLuint x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIPROC) (GLuint index, GLuint x, GLuint y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIPROC) (GLuint index, GLuint x, GLuint y, GLuint z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIPROC) (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIVPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIVPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIVPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIVPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4BVPROC) (GLuint index, const GLbyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4SVPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UBVPROC) (GLuint index, const GLubyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4USVPROC) (GLuint index, const GLushort *v);
+typedef void (APIENTRYP PFNGLGETUNIFORMUIVPROC) (GLuint program, GLint location, GLuint *params);
+typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONPROC) (GLuint program, GLuint color, const GLchar *name);
+typedef GLint (APIENTRYP PFNGLGETFRAGDATALOCATIONPROC) (GLuint program, const GLchar *name);
+typedef void (APIENTRYP PFNGLUNIFORM1UIPROC) (GLint location, GLuint v0);
+typedef void (APIENTRYP PFNGLUNIFORM2UIPROC) (GLint location, GLuint v0, GLuint v1);
+typedef void (APIENTRYP PFNGLUNIFORM3UIPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2);
+typedef void (APIENTRYP PFNGLUNIFORM4UIPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+typedef void (APIENTRYP PFNGLUNIFORM1UIVPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLUNIFORM2UIVPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLUNIFORM3UIVPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLUNIFORM4UIVPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLTEXPARAMETERIIVPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLTEXPARAMETERIUIVPROC) (GLenum target, GLenum pname, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETTEXPARAMETERIIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETTEXPARAMETERIUIVPROC) (GLenum target, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLCLEARBUFFERIVPROC) (GLenum buffer, GLint drawbuffer, const GLint *value);
+typedef void (APIENTRYP PFNGLCLEARBUFFERUIVPROC) (GLenum buffer, GLint drawbuffer, const GLuint *value);
+typedef void (APIENTRYP PFNGLCLEARBUFFERFVPROC) (GLenum buffer, GLint drawbuffer, const GLfloat *value);
+typedef void (APIENTRYP PFNGLCLEARBUFFERFIPROC) (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil);
+typedef const GLubyte *(APIENTRYP PFNGLGETSTRINGIPROC) (GLenum name, GLuint index);
+typedef GLboolean (APIENTRYP PFNGLISRENDERBUFFERPROC) (GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLBINDRENDERBUFFERPROC) (GLenum target, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLDELETERENDERBUFFERSPROC) (GLsizei n, const GLuint *renderbuffers);
+typedef void (APIENTRYP PFNGLGENRENDERBUFFERSPROC) (GLsizei n, GLuint *renderbuffers);
+typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETRENDERBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef GLboolean (APIENTRYP PFNGLISFRAMEBUFFERPROC) (GLuint framebuffer);
+typedef void (APIENTRYP PFNGLBINDFRAMEBUFFERPROC) (GLenum target, GLuint framebuffer);
+typedef void (APIENTRYP PFNGLDELETEFRAMEBUFFERSPROC) (GLsizei n, const GLuint *framebuffers);
+typedef void (APIENTRYP PFNGLGENFRAMEBUFFERSPROC) (GLsizei n, GLuint *framebuffers);
+typedef GLenum (APIENTRYP PFNGLCHECKFRAMEBUFFERSTATUSPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE1DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERRENDERBUFFERPROC) (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLGETFRAMEBUFFERATTACHMENTPARAMETERIVPROC) (GLenum target, GLenum attachment, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGENERATEMIPMAPPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLBLITFRAMEBUFFERPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYERPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
+typedef void *(APIENTRYP PFNGLMAPBUFFERRANGEPROC) (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+typedef void (APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEPROC) (GLenum target, GLintptr offset, GLsizeiptr length);
+typedef void (APIENTRYP PFNGLBINDVERTEXARRAYPROC) (GLuint array);
+typedef void (APIENTRYP PFNGLDELETEVERTEXARRAYSPROC) (GLsizei n, const GLuint *arrays);
+typedef void (APIENTRYP PFNGLGENVERTEXARRAYSPROC) (GLsizei n, GLuint *arrays);
+typedef GLboolean (APIENTRYP PFNGLISVERTEXARRAYPROC) (GLuint array);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glColorMaski (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
+GLAPI void APIENTRY glGetBooleani_v (GLenum target, GLuint index, GLboolean *data);
+GLAPI void APIENTRY glGetIntegeri_v (GLenum target, GLuint index, GLint *data);
+GLAPI void APIENTRY glEnablei (GLenum target, GLuint index);
+GLAPI void APIENTRY glDisablei (GLenum target, GLuint index);
+GLAPI GLboolean APIENTRY glIsEnabledi (GLenum target, GLuint index);
+GLAPI void APIENTRY glBeginTransformFeedback (GLenum primitiveMode);
+GLAPI void APIENTRY glEndTransformFeedback (void);
+GLAPI void APIENTRY glBindBufferRange (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+GLAPI void APIENTRY glBindBufferBase (GLenum target, GLuint index, GLuint buffer);
+GLAPI void APIENTRY glTransformFeedbackVaryings (GLuint program, GLsizei count, const GLchar *const*varyings, GLenum bufferMode);
+GLAPI void APIENTRY glGetTransformFeedbackVarying (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
+GLAPI void APIENTRY glClampColor (GLenum target, GLenum clamp);
+GLAPI void APIENTRY glBeginConditionalRender (GLuint id, GLenum mode);
+GLAPI void APIENTRY glEndConditionalRender (void);
+GLAPI void APIENTRY glVertexAttribIPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glGetVertexAttribIiv (GLuint index, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVertexAttribIuiv (GLuint index, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glVertexAttribI1i (GLuint index, GLint x);
+GLAPI void APIENTRY glVertexAttribI2i (GLuint index, GLint x, GLint y);
+GLAPI void APIENTRY glVertexAttribI3i (GLuint index, GLint x, GLint y, GLint z);
+GLAPI void APIENTRY glVertexAttribI4i (GLuint index, GLint x, GLint y, GLint z, GLint w);
+GLAPI void APIENTRY glVertexAttribI1ui (GLuint index, GLuint x);
+GLAPI void APIENTRY glVertexAttribI2ui (GLuint index, GLuint x, GLuint y);
+GLAPI void APIENTRY glVertexAttribI3ui (GLuint index, GLuint x, GLuint y, GLuint z);
+GLAPI void APIENTRY glVertexAttribI4ui (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+GLAPI void APIENTRY glVertexAttribI1iv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttribI2iv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttribI3iv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttribI4iv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttribI1uiv (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttribI2uiv (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttribI3uiv (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttribI4uiv (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttribI4bv (GLuint index, const GLbyte *v);
+GLAPI void APIENTRY glVertexAttribI4sv (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttribI4ubv (GLuint index, const GLubyte *v);
+GLAPI void APIENTRY glVertexAttribI4usv (GLuint index, const GLushort *v);
+GLAPI void APIENTRY glGetUniformuiv (GLuint program, GLint location, GLuint *params);
+GLAPI void APIENTRY glBindFragDataLocation (GLuint program, GLuint color, const GLchar *name);
+GLAPI GLint APIENTRY glGetFragDataLocation (GLuint program, const GLchar *name);
+GLAPI void APIENTRY glUniform1ui (GLint location, GLuint v0);
+GLAPI void APIENTRY glUniform2ui (GLint location, GLuint v0, GLuint v1);
+GLAPI void APIENTRY glUniform3ui (GLint location, GLuint v0, GLuint v1, GLuint v2);
+GLAPI void APIENTRY glUniform4ui (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+GLAPI void APIENTRY glUniform1uiv (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glUniform2uiv (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glUniform3uiv (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glUniform4uiv (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glTexParameterIiv (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glTexParameterIuiv (GLenum target, GLenum pname, const GLuint *params);
+GLAPI void APIENTRY glGetTexParameterIiv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetTexParameterIuiv (GLenum target, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glClearBufferiv (GLenum buffer, GLint drawbuffer, const GLint *value);
+GLAPI void APIENTRY glClearBufferuiv (GLenum buffer, GLint drawbuffer, const GLuint *value);
+GLAPI void APIENTRY glClearBufferfv (GLenum buffer, GLint drawbuffer, const GLfloat *value);
+GLAPI void APIENTRY glClearBufferfi (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil);
+GLAPI const GLubyte *APIENTRY glGetStringi (GLenum name, GLuint index);
+GLAPI GLboolean APIENTRY glIsRenderbuffer (GLuint renderbuffer);
+GLAPI void APIENTRY glBindRenderbuffer (GLenum target, GLuint renderbuffer);
+GLAPI void APIENTRY glDeleteRenderbuffers (GLsizei n, const GLuint *renderbuffers);
+GLAPI void APIENTRY glGenRenderbuffers (GLsizei n, GLuint *renderbuffers);
+GLAPI void APIENTRY glRenderbufferStorage (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetRenderbufferParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI GLboolean APIENTRY glIsFramebuffer (GLuint framebuffer);
+GLAPI void APIENTRY glBindFramebuffer (GLenum target, GLuint framebuffer);
+GLAPI void APIENTRY glDeleteFramebuffers (GLsizei n, const GLuint *framebuffers);
+GLAPI void APIENTRY glGenFramebuffers (GLsizei n, GLuint *framebuffers);
+GLAPI GLenum APIENTRY glCheckFramebufferStatus (GLenum target);
+GLAPI void APIENTRY glFramebufferTexture1D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GLAPI void APIENTRY glFramebufferTexture2D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GLAPI void APIENTRY glFramebufferTexture3D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
+GLAPI void APIENTRY glFramebufferRenderbuffer (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+GLAPI void APIENTRY glGetFramebufferAttachmentParameteriv (GLenum target, GLenum attachment, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGenerateMipmap (GLenum target);
+GLAPI void APIENTRY glBlitFramebuffer (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+GLAPI void APIENTRY glRenderbufferStorageMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glFramebufferTextureLayer (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
+GLAPI void *APIENTRY glMapBufferRange (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
+GLAPI void APIENTRY glFlushMappedBufferRange (GLenum target, GLintptr offset, GLsizeiptr length);
+GLAPI void APIENTRY glBindVertexArray (GLuint array);
+GLAPI void APIENTRY glDeleteVertexArrays (GLsizei n, const GLuint *arrays);
+GLAPI void APIENTRY glGenVertexArrays (GLsizei n, GLuint *arrays);
+GLAPI GLboolean APIENTRY glIsVertexArray (GLuint array);
 #endif
+#endif /* GL_VERSION_3_0 */
 
-#ifndef GL_ARB_uniform_buffer_object
+#ifndef GL_VERSION_3_1
+#define GL_VERSION_3_1 1
+#define GL_SAMPLER_2D_RECT                0x8B63
+#define GL_SAMPLER_2D_RECT_SHADOW         0x8B64
+#define GL_SAMPLER_BUFFER                 0x8DC2
+#define GL_INT_SAMPLER_2D_RECT            0x8DCD
+#define GL_INT_SAMPLER_BUFFER             0x8DD0
+#define GL_UNSIGNED_INT_SAMPLER_2D_RECT   0x8DD5
+#define GL_UNSIGNED_INT_SAMPLER_BUFFER    0x8DD8
+#define GL_TEXTURE_BUFFER                 0x8C2A
+#define GL_MAX_TEXTURE_BUFFER_SIZE        0x8C2B
+#define GL_TEXTURE_BINDING_BUFFER         0x8C2C
+#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING 0x8C2D
+#define GL_TEXTURE_RECTANGLE              0x84F5
+#define GL_TEXTURE_BINDING_RECTANGLE      0x84F6
+#define GL_PROXY_TEXTURE_RECTANGLE        0x84F7
+#define GL_MAX_RECTANGLE_TEXTURE_SIZE     0x84F8
+#define GL_R8_SNORM                       0x8F94
+#define GL_RG8_SNORM                      0x8F95
+#define GL_RGB8_SNORM                     0x8F96
+#define GL_RGBA8_SNORM                    0x8F97
+#define GL_R16_SNORM                      0x8F98
+#define GL_RG16_SNORM                     0x8F99
+#define GL_RGB16_SNORM                    0x8F9A
+#define GL_RGBA16_SNORM                   0x8F9B
+#define GL_SIGNED_NORMALIZED              0x8F9C
+#define GL_PRIMITIVE_RESTART              0x8F9D
+#define GL_PRIMITIVE_RESTART_INDEX        0x8F9E
+#define GL_COPY_READ_BUFFER               0x8F36
+#define GL_COPY_WRITE_BUFFER              0x8F37
 #define GL_UNIFORM_BUFFER                 0x8A11
 #define GL_UNIFORM_BUFFER_BINDING         0x8A28
 #define GL_UNIFORM_BUFFER_START           0x8A29
@@ -2139,44 +1342,104 @@ extern "C" {
 #define GL_UNIFORM_BLOCK_REFERENCED_BY_GEOMETRY_SHADER 0x8A45
 #define GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER 0x8A46
 #define GL_INVALID_INDEX                  0xFFFFFFFFu
+typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDPROC) (GLenum mode, GLint first, GLsizei count, GLsizei instancecount);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount);
+typedef void (APIENTRYP PFNGLTEXBUFFERPROC) (GLenum target, GLenum internalformat, GLuint buffer);
+typedef void (APIENTRYP PFNGLPRIMITIVERESTARTINDEXPROC) (GLuint index);
+typedef void (APIENTRYP PFNGLCOPYBUFFERSUBDATAPROC) (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLGETUNIFORMINDICESPROC) (GLuint program, GLsizei uniformCount, const GLchar *const*uniformNames, GLuint *uniformIndices);
+typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMSIVPROC) (GLuint program, GLsizei uniformCount, const GLuint *uniformIndices, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMNAMEPROC) (GLuint program, GLuint uniformIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformName);
+typedef GLuint (APIENTRYP PFNGLGETUNIFORMBLOCKINDEXPROC) (GLuint program, const GLchar *uniformBlockName);
+typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMBLOCKIVPROC) (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMBLOCKNAMEPROC) (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName);
+typedef void (APIENTRYP PFNGLUNIFORMBLOCKBINDINGPROC) (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawArraysInstanced (GLenum mode, GLint first, GLsizei count, GLsizei instancecount);
+GLAPI void APIENTRY glDrawElementsInstanced (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount);
+GLAPI void APIENTRY glTexBuffer (GLenum target, GLenum internalformat, GLuint buffer);
+GLAPI void APIENTRY glPrimitiveRestartIndex (GLuint index);
+GLAPI void APIENTRY glCopyBufferSubData (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
+GLAPI void APIENTRY glGetUniformIndices (GLuint program, GLsizei uniformCount, const GLchar *const*uniformNames, GLuint *uniformIndices);
+GLAPI void APIENTRY glGetActiveUniformsiv (GLuint program, GLsizei uniformCount, const GLuint *uniformIndices, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetActiveUniformName (GLuint program, GLuint uniformIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformName);
+GLAPI GLuint APIENTRY glGetUniformBlockIndex (GLuint program, const GLchar *uniformBlockName);
+GLAPI void APIENTRY glGetActiveUniformBlockiv (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetActiveUniformBlockName (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName);
+GLAPI void APIENTRY glUniformBlockBinding (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding);
 #endif
+#endif /* GL_VERSION_3_1 */
 
-#ifndef GL_ARB_compatibility
-/* ARB_compatibility just defines tokens from core 3.0 */
-#endif
-
-#ifndef GL_ARB_copy_buffer
-#define GL_COPY_READ_BUFFER_BINDING       0x8F36
-#define GL_COPY_READ_BUFFER               GL_COPY_READ_BUFFER_BINDING
-#define GL_COPY_WRITE_BUFFER_BINDING      0x8F37
-#define GL_COPY_WRITE_BUFFER              GL_COPY_WRITE_BUFFER_BINDING
+#ifndef GL_VERSION_3_2
+#define GL_VERSION_3_2 1
+typedef struct __GLsync *GLsync;
+#ifndef GLEXT_64_TYPES_DEFINED
+/* This code block is duplicated in glxext.h, so must be protected */
+#define GLEXT_64_TYPES_DEFINED
+/* Define int32_t, int64_t, and uint64_t types for UST/MSC */
+/* (as used in the GL_EXT_timer_query extension). */
+#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+#include <inttypes.h>
+#elif defined(__sun__) || defined(__digital__)
+#include <inttypes.h>
+#if defined(__STDC__)
+#if defined(__arch64__) || defined(_LP64)
+typedef long int int64_t;
+typedef unsigned long int uint64_t;
+#else
+typedef long long int int64_t;
+typedef unsigned long long int uint64_t;
+#endif /* __arch64__ */
+#endif /* __STDC__ */
+#elif defined( __VMS ) || defined(__sgi)
+#include <inttypes.h>
+#elif defined(__SCO__) || defined(__USLC__)
+#include <stdint.h>
+#elif defined(__UNIXOS2__) || defined(__SOL64__)
+typedef long int int32_t;
+typedef long long int int64_t;
+typedef unsigned long long int uint64_t;
+#elif defined(_WIN32) && defined(__GNUC__)
+#include <stdint.h>
+#elif defined(_WIN32)
+typedef __int32 int32_t;
+typedef __int64 int64_t;
+typedef unsigned __int64 uint64_t;
+#else
+/* Fallback if nothing above works */
+#include <inttypes.h>
 #endif
-
-#ifndef GL_ARB_shader_texture_lod
 #endif
-
-#ifndef GL_ARB_depth_clamp
+typedef uint64_t GLuint64;
+typedef int64_t GLint64;
+#define GL_CONTEXT_CORE_PROFILE_BIT       0x00000001
+#define GL_CONTEXT_COMPATIBILITY_PROFILE_BIT 0x00000002
+#define GL_LINES_ADJACENCY                0x000A
+#define GL_LINE_STRIP_ADJACENCY           0x000B
+#define GL_TRIANGLES_ADJACENCY            0x000C
+#define GL_TRIANGLE_STRIP_ADJACENCY       0x000D
+#define GL_PROGRAM_POINT_SIZE             0x8642
+#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS 0x8C29
+#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED 0x8DA7
+#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS 0x8DA8
+#define GL_GEOMETRY_SHADER                0x8DD9
+#define GL_GEOMETRY_VERTICES_OUT          0x8916
+#define GL_GEOMETRY_INPUT_TYPE            0x8917
+#define GL_GEOMETRY_OUTPUT_TYPE           0x8918
+#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS 0x8DDF
+#define GL_MAX_GEOMETRY_OUTPUT_VERTICES   0x8DE0
+#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS 0x8DE1
+#define GL_MAX_VERTEX_OUTPUT_COMPONENTS   0x9122
+#define GL_MAX_GEOMETRY_INPUT_COMPONENTS  0x9123
+#define GL_MAX_GEOMETRY_OUTPUT_COMPONENTS 0x9124
+#define GL_MAX_FRAGMENT_INPUT_COMPONENTS  0x9125
+#define GL_CONTEXT_PROFILE_MASK           0x9126
 #define GL_DEPTH_CLAMP                    0x864F
-#endif
-
-#ifndef GL_ARB_draw_elements_base_vertex
-#endif
-
-#ifndef GL_ARB_fragment_coord_conventions
-#endif
-
-#ifndef GL_ARB_provoking_vertex
 #define GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION 0x8E4C
 #define GL_FIRST_VERTEX_CONVENTION        0x8E4D
 #define GL_LAST_VERTEX_CONVENTION         0x8E4E
 #define GL_PROVOKING_VERTEX               0x8E4F
-#endif
-
-#ifndef GL_ARB_seamless_cube_map
 #define GL_TEXTURE_CUBE_MAP_SEAMLESS      0x884F
-#endif
-
-#ifndef GL_ARB_sync
 #define GL_MAX_SERVER_WAIT_TIMEOUT        0x9111
 #define GL_OBJECT_TYPE                    0x9112
 #define GL_SYNC_CONDITION                 0x9113
@@ -2190,11 +1453,8 @@ extern "C" {
 #define GL_TIMEOUT_EXPIRED                0x911B
 #define GL_CONDITION_SATISFIED            0x911C
 #define GL_WAIT_FAILED                    0x911D
-#define GL_SYNC_FLUSH_COMMANDS_BIT        0x00000001
 #define GL_TIMEOUT_IGNORED                0xFFFFFFFFFFFFFFFFull
-#endif
-
-#ifndef GL_ARB_texture_multisample
+#define GL_SYNC_FLUSH_COMMANDS_BIT        0x00000001
 #define GL_SAMPLE_POSITION                0x8E50
 #define GL_SAMPLE_MASK                    0x8E51
 #define GL_SAMPLE_MASK_VALUE              0x8E52
@@ -2216,112 +1476,207 @@ extern "C" {
 #define GL_MAX_COLOR_TEXTURE_SAMPLES      0x910E
 #define GL_MAX_DEPTH_TEXTURE_SAMPLES      0x910F
 #define GL_MAX_INTEGER_SAMPLES            0x9110
+typedef void (APIENTRYP PFNGLDRAWELEMENTSBASEVERTEXPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLint basevertex);
+typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSBASEVERTEXPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const void *indices, GLint basevertex);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEVERTEXPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLint basevertex);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSBASEVERTEXPROC) (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei drawcount, const GLint *basevertex);
+typedef void (APIENTRYP PFNGLPROVOKINGVERTEXPROC) (GLenum mode);
+typedef GLsync (APIENTRYP PFNGLFENCESYNCPROC) (GLenum condition, GLbitfield flags);
+typedef GLboolean (APIENTRYP PFNGLISSYNCPROC) (GLsync sync);
+typedef void (APIENTRYP PFNGLDELETESYNCPROC) (GLsync sync);
+typedef GLenum (APIENTRYP PFNGLCLIENTWAITSYNCPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
+typedef void (APIENTRYP PFNGLWAITSYNCPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
+typedef void (APIENTRYP PFNGLGETINTEGER64VPROC) (GLenum pname, GLint64 *data);
+typedef void (APIENTRYP PFNGLGETSYNCIVPROC) (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
+typedef void (APIENTRYP PFNGLGETINTEGER64I_VPROC) (GLenum target, GLuint index, GLint64 *data);
+typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERI64VPROC) (GLenum target, GLenum pname, GLint64 *params);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLTEXIMAGE2DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLTEXIMAGE3DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLGETMULTISAMPLEFVPROC) (GLenum pname, GLuint index, GLfloat *val);
+typedef void (APIENTRYP PFNGLSAMPLEMASKIPROC) (GLuint maskNumber, GLbitfield mask);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawElementsBaseVertex (GLenum mode, GLsizei count, GLenum type, const void *indices, GLint basevertex);
+GLAPI void APIENTRY glDrawRangeElementsBaseVertex (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const void *indices, GLint basevertex);
+GLAPI void APIENTRY glDrawElementsInstancedBaseVertex (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLint basevertex);
+GLAPI void APIENTRY glMultiDrawElementsBaseVertex (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei drawcount, const GLint *basevertex);
+GLAPI void APIENTRY glProvokingVertex (GLenum mode);
+GLAPI GLsync APIENTRY glFenceSync (GLenum condition, GLbitfield flags);
+GLAPI GLboolean APIENTRY glIsSync (GLsync sync);
+GLAPI void APIENTRY glDeleteSync (GLsync sync);
+GLAPI GLenum APIENTRY glClientWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout);
+GLAPI void APIENTRY glWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout);
+GLAPI void APIENTRY glGetInteger64v (GLenum pname, GLint64 *data);
+GLAPI void APIENTRY glGetSynciv (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
+GLAPI void APIENTRY glGetInteger64i_v (GLenum target, GLuint index, GLint64 *data);
+GLAPI void APIENTRY glGetBufferParameteri64v (GLenum target, GLenum pname, GLint64 *params);
+GLAPI void APIENTRY glFramebufferTexture (GLenum target, GLenum attachment, GLuint texture, GLint level);
+GLAPI void APIENTRY glTexImage2DMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glTexImage3DMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glGetMultisamplefv (GLenum pname, GLuint index, GLfloat *val);
+GLAPI void APIENTRY glSampleMaski (GLuint maskNumber, GLbitfield mask);
 #endif
+#endif /* GL_VERSION_3_2 */
 
-#ifndef GL_ARB_vertex_array_bgra
-/* reuse GL_BGRA */
-#endif
-
-#ifndef GL_ARB_draw_buffers_blend
-#endif
-
-#ifndef GL_ARB_sample_shading
-#define GL_SAMPLE_SHADING_ARB             0x8C36
-#define GL_MIN_SAMPLE_SHADING_VALUE_ARB   0x8C37
-#endif
-
-#ifndef GL_ARB_texture_cube_map_array
-#define GL_TEXTURE_CUBE_MAP_ARRAY_ARB     0x9009
-#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY_ARB 0x900A
-#define GL_PROXY_TEXTURE_CUBE_MAP_ARRAY_ARB 0x900B
-#define GL_SAMPLER_CUBE_MAP_ARRAY_ARB     0x900C
-#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW_ARB 0x900D
-#define GL_INT_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900E
-#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900F
-#endif
-
-#ifndef GL_ARB_texture_gather
-#define GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET_ARB 0x8E5E
-#define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET_ARB 0x8E5F
-#define GL_MAX_PROGRAM_TEXTURE_GATHER_COMPONENTS_ARB 0x8F9F
-#endif
-
-#ifndef GL_ARB_texture_query_lod
-#endif
-
-#ifndef GL_ARB_shading_language_include
-#define GL_SHADER_INCLUDE_ARB             0x8DAE
-#define GL_NAMED_STRING_LENGTH_ARB        0x8DE9
-#define GL_NAMED_STRING_TYPE_ARB          0x8DEA
-#endif
-
-#ifndef GL_ARB_texture_compression_bptc
-#define GL_COMPRESSED_RGBA_BPTC_UNORM_ARB 0x8E8C
-#define GL_COMPRESSED_SRGB_ALPHA_BPTC_UNORM_ARB 0x8E8D
-#define GL_COMPRESSED_RGB_BPTC_SIGNED_FLOAT_ARB 0x8E8E
-#define GL_COMPRESSED_RGB_BPTC_UNSIGNED_FLOAT_ARB 0x8E8F
-#endif
-
-#ifndef GL_ARB_blend_func_extended
+#ifndef GL_VERSION_3_3
+#define GL_VERSION_3_3 1
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR    0x88FE
 #define GL_SRC1_COLOR                     0x88F9
-/* reuse GL_SRC1_ALPHA */
 #define GL_ONE_MINUS_SRC1_COLOR           0x88FA
 #define GL_ONE_MINUS_SRC1_ALPHA           0x88FB
 #define GL_MAX_DUAL_SOURCE_DRAW_BUFFERS   0x88FC
-#endif
-
-#ifndef GL_ARB_explicit_attrib_location
-#endif
-
-#ifndef GL_ARB_occlusion_query2
 #define GL_ANY_SAMPLES_PASSED             0x8C2F
-#endif
-
-#ifndef GL_ARB_sampler_objects
 #define GL_SAMPLER_BINDING                0x8919
-#endif
-
-#ifndef GL_ARB_shader_bit_encoding
-#endif
-
-#ifndef GL_ARB_texture_rgb10_a2ui
 #define GL_RGB10_A2UI                     0x906F
-#endif
-
-#ifndef GL_ARB_texture_swizzle
 #define GL_TEXTURE_SWIZZLE_R              0x8E42
 #define GL_TEXTURE_SWIZZLE_G              0x8E43
 #define GL_TEXTURE_SWIZZLE_B              0x8E44
 #define GL_TEXTURE_SWIZZLE_A              0x8E45
 #define GL_TEXTURE_SWIZZLE_RGBA           0x8E46
-#endif
-
-#ifndef GL_ARB_timer_query
 #define GL_TIME_ELAPSED                   0x88BF
 #define GL_TIMESTAMP                      0x8E28
-#endif
-
-#ifndef GL_ARB_vertex_type_2_10_10_10_rev
-/* reuse GL_UNSIGNED_INT_2_10_10_10_REV */
 #define GL_INT_2_10_10_10_REV             0x8D9F
+typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONINDEXEDPROC) (GLuint program, GLuint colorNumber, GLuint index, const GLchar *name);
+typedef GLint (APIENTRYP PFNGLGETFRAGDATAINDEXPROC) (GLuint program, const GLchar *name);
+typedef void (APIENTRYP PFNGLGENSAMPLERSPROC) (GLsizei count, GLuint *samplers);
+typedef void (APIENTRYP PFNGLDELETESAMPLERSPROC) (GLsizei count, const GLuint *samplers);
+typedef GLboolean (APIENTRYP PFNGLISSAMPLERPROC) (GLuint sampler);
+typedef void (APIENTRYP PFNGLBINDSAMPLERPROC) (GLuint unit, GLuint sampler);
+typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIPROC) (GLuint sampler, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIVPROC) (GLuint sampler, GLenum pname, const GLint *param);
+typedef void (APIENTRYP PFNGLSAMPLERPARAMETERFPROC) (GLuint sampler, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLSAMPLERPARAMETERFVPROC) (GLuint sampler, GLenum pname, const GLfloat *param);
+typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIIVPROC) (GLuint sampler, GLenum pname, const GLint *param);
+typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIUIVPROC) (GLuint sampler, GLenum pname, const GLuint *param);
+typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIVPROC) (GLuint sampler, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIIVPROC) (GLuint sampler, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERFVPROC) (GLuint sampler, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIUIVPROC) (GLuint sampler, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLQUERYCOUNTERPROC) (GLuint id, GLenum target);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTI64VPROC) (GLuint id, GLenum pname, GLint64 *params);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTUI64VPROC) (GLuint id, GLenum pname, GLuint64 *params);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBDIVISORPROC) (GLuint index, GLuint divisor);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP1UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP1UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP2UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP2UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP3UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP3UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP4UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBP4UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+typedef void (APIENTRYP PFNGLVERTEXP2UIPROC) (GLenum type, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXP2UIVPROC) (GLenum type, const GLuint *value);
+typedef void (APIENTRYP PFNGLVERTEXP3UIPROC) (GLenum type, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXP3UIVPROC) (GLenum type, const GLuint *value);
+typedef void (APIENTRYP PFNGLVERTEXP4UIPROC) (GLenum type, GLuint value);
+typedef void (APIENTRYP PFNGLVERTEXP4UIVPROC) (GLenum type, const GLuint *value);
+typedef void (APIENTRYP PFNGLTEXCOORDP1UIPROC) (GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP1UIVPROC) (GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP2UIPROC) (GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP2UIVPROC) (GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP3UIPROC) (GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP3UIVPROC) (GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP4UIPROC) (GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLTEXCOORDP4UIVPROC) (GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP1UIPROC) (GLenum texture, GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP1UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP2UIPROC) (GLenum texture, GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP2UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP3UIPROC) (GLenum texture, GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP3UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP4UIPROC) (GLenum texture, GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDP4UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLNORMALP3UIPROC) (GLenum type, GLuint coords);
+typedef void (APIENTRYP PFNGLNORMALP3UIVPROC) (GLenum type, const GLuint *coords);
+typedef void (APIENTRYP PFNGLCOLORP3UIPROC) (GLenum type, GLuint color);
+typedef void (APIENTRYP PFNGLCOLORP3UIVPROC) (GLenum type, const GLuint *color);
+typedef void (APIENTRYP PFNGLCOLORP4UIPROC) (GLenum type, GLuint color);
+typedef void (APIENTRYP PFNGLCOLORP4UIVPROC) (GLenum type, const GLuint *color);
+typedef void (APIENTRYP PFNGLSECONDARYCOLORP3UIPROC) (GLenum type, GLuint color);
+typedef void (APIENTRYP PFNGLSECONDARYCOLORP3UIVPROC) (GLenum type, const GLuint *color);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBindFragDataLocationIndexed (GLuint program, GLuint colorNumber, GLuint index, const GLchar *name);
+GLAPI GLint APIENTRY glGetFragDataIndex (GLuint program, const GLchar *name);
+GLAPI void APIENTRY glGenSamplers (GLsizei count, GLuint *samplers);
+GLAPI void APIENTRY glDeleteSamplers (GLsizei count, const GLuint *samplers);
+GLAPI GLboolean APIENTRY glIsSampler (GLuint sampler);
+GLAPI void APIENTRY glBindSampler (GLuint unit, GLuint sampler);
+GLAPI void APIENTRY glSamplerParameteri (GLuint sampler, GLenum pname, GLint param);
+GLAPI void APIENTRY glSamplerParameteriv (GLuint sampler, GLenum pname, const GLint *param);
+GLAPI void APIENTRY glSamplerParameterf (GLuint sampler, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glSamplerParameterfv (GLuint sampler, GLenum pname, const GLfloat *param);
+GLAPI void APIENTRY glSamplerParameterIiv (GLuint sampler, GLenum pname, const GLint *param);
+GLAPI void APIENTRY glSamplerParameterIuiv (GLuint sampler, GLenum pname, const GLuint *param);
+GLAPI void APIENTRY glGetSamplerParameteriv (GLuint sampler, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetSamplerParameterIiv (GLuint sampler, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetSamplerParameterfv (GLuint sampler, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetSamplerParameterIuiv (GLuint sampler, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glQueryCounter (GLuint id, GLenum target);
+GLAPI void APIENTRY glGetQueryObjecti64v (GLuint id, GLenum pname, GLint64 *params);
+GLAPI void APIENTRY glGetQueryObjectui64v (GLuint id, GLenum pname, GLuint64 *params);
+GLAPI void APIENTRY glVertexAttribDivisor (GLuint index, GLuint divisor);
+GLAPI void APIENTRY glVertexAttribP1ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+GLAPI void APIENTRY glVertexAttribP1uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+GLAPI void APIENTRY glVertexAttribP2ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+GLAPI void APIENTRY glVertexAttribP2uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+GLAPI void APIENTRY glVertexAttribP3ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+GLAPI void APIENTRY glVertexAttribP3uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+GLAPI void APIENTRY glVertexAttribP4ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
+GLAPI void APIENTRY glVertexAttribP4uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
+GLAPI void APIENTRY glVertexP2ui (GLenum type, GLuint value);
+GLAPI void APIENTRY glVertexP2uiv (GLenum type, const GLuint *value);
+GLAPI void APIENTRY glVertexP3ui (GLenum type, GLuint value);
+GLAPI void APIENTRY glVertexP3uiv (GLenum type, const GLuint *value);
+GLAPI void APIENTRY glVertexP4ui (GLenum type, GLuint value);
+GLAPI void APIENTRY glVertexP4uiv (GLenum type, const GLuint *value);
+GLAPI void APIENTRY glTexCoordP1ui (GLenum type, GLuint coords);
+GLAPI void APIENTRY glTexCoordP1uiv (GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glTexCoordP2ui (GLenum type, GLuint coords);
+GLAPI void APIENTRY glTexCoordP2uiv (GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glTexCoordP3ui (GLenum type, GLuint coords);
+GLAPI void APIENTRY glTexCoordP3uiv (GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glTexCoordP4ui (GLenum type, GLuint coords);
+GLAPI void APIENTRY glTexCoordP4uiv (GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glMultiTexCoordP1ui (GLenum texture, GLenum type, GLuint coords);
+GLAPI void APIENTRY glMultiTexCoordP1uiv (GLenum texture, GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glMultiTexCoordP2ui (GLenum texture, GLenum type, GLuint coords);
+GLAPI void APIENTRY glMultiTexCoordP2uiv (GLenum texture, GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glMultiTexCoordP3ui (GLenum texture, GLenum type, GLuint coords);
+GLAPI void APIENTRY glMultiTexCoordP3uiv (GLenum texture, GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glMultiTexCoordP4ui (GLenum texture, GLenum type, GLuint coords);
+GLAPI void APIENTRY glMultiTexCoordP4uiv (GLenum texture, GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glNormalP3ui (GLenum type, GLuint coords);
+GLAPI void APIENTRY glNormalP3uiv (GLenum type, const GLuint *coords);
+GLAPI void APIENTRY glColorP3ui (GLenum type, GLuint color);
+GLAPI void APIENTRY glColorP3uiv (GLenum type, const GLuint *color);
+GLAPI void APIENTRY glColorP4ui (GLenum type, GLuint color);
+GLAPI void APIENTRY glColorP4uiv (GLenum type, const GLuint *color);
+GLAPI void APIENTRY glSecondaryColorP3ui (GLenum type, GLuint color);
+GLAPI void APIENTRY glSecondaryColorP3uiv (GLenum type, const GLuint *color);
 #endif
+#endif /* GL_VERSION_3_3 */
 
-#ifndef GL_ARB_draw_indirect
+#ifndef GL_VERSION_4_0
+#define GL_VERSION_4_0 1
+#define GL_SAMPLE_SHADING                 0x8C36
+#define GL_MIN_SAMPLE_SHADING_VALUE       0x8C37
+#define GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET 0x8E5E
+#define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET 0x8E5F
+#define GL_TEXTURE_CUBE_MAP_ARRAY         0x9009
+#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY 0x900A
+#define GL_PROXY_TEXTURE_CUBE_MAP_ARRAY   0x900B
+#define GL_SAMPLER_CUBE_MAP_ARRAY         0x900C
+#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW  0x900D
+#define GL_INT_SAMPLER_CUBE_MAP_ARRAY     0x900E
+#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY 0x900F
 #define GL_DRAW_INDIRECT_BUFFER           0x8F3F
 #define GL_DRAW_INDIRECT_BUFFER_BINDING   0x8F43
-#endif
-
-#ifndef GL_ARB_gpu_shader5
 #define GL_GEOMETRY_SHADER_INVOCATIONS    0x887F
 #define GL_MAX_GEOMETRY_SHADER_INVOCATIONS 0x8E5A
 #define GL_MIN_FRAGMENT_INTERPOLATION_OFFSET 0x8E5B
 #define GL_MAX_FRAGMENT_INTERPOLATION_OFFSET 0x8E5C
 #define GL_FRAGMENT_INTERPOLATION_OFFSET_BITS 0x8E5D
-/* reuse GL_MAX_VERTEX_STREAMS */
-#endif
-
-#ifndef GL_ARB_gpu_shader_fp64
-/* reuse GL_DOUBLE */
+#define GL_MAX_VERTEX_STREAMS             0x8E71
 #define GL_DOUBLE_VEC2                    0x8FFC
 #define GL_DOUBLE_VEC3                    0x8FFD
 #define GL_DOUBLE_VEC4                    0x8FFE
@@ -2334,9 +1689,6 @@ extern "C" {
 #define GL_DOUBLE_MAT3x4                  0x8F4C
 #define GL_DOUBLE_MAT4x2                  0x8F4D
 #define GL_DOUBLE_MAT4x3                  0x8F4E
-#endif
-
-#ifndef GL_ARB_shader_subroutine
 #define GL_ACTIVE_SUBROUTINES             0x8DE5
 #define GL_ACTIVE_SUBROUTINE_UNIFORMS     0x8DE6
 #define GL_ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS 0x8E47
@@ -2346,11 +1698,6 @@ extern "C" {
 #define GL_MAX_SUBROUTINE_UNIFORM_LOCATIONS 0x8DE8
 #define GL_NUM_COMPATIBLE_SUBROUTINES     0x8E4A
 #define GL_COMPATIBLE_SUBROUTINES         0x8E4B
-/* reuse GL_UNIFORM_SIZE */
-/* reuse GL_UNIFORM_NAME_LENGTH */
-#endif
-
-#ifndef GL_ARB_tessellation_shader
 #define GL_PATCHES                        0x000E
 #define GL_PATCH_VERTICES                 0x8E72
 #define GL_PATCH_DEFAULT_INNER_LEVEL      0x8E73
@@ -2360,14 +1707,9 @@ extern "C" {
 #define GL_TESS_GEN_SPACING               0x8E77
 #define GL_TESS_GEN_VERTEX_ORDER          0x8E78
 #define GL_TESS_GEN_POINT_MODE            0x8E79
-/* reuse GL_TRIANGLES */
-/* reuse GL_QUADS */
 #define GL_ISOLINES                       0x8E7A
-/* reuse GL_EQUAL */
 #define GL_FRACTIONAL_ODD                 0x8E7B
 #define GL_FRACTIONAL_EVEN                0x8E7C
-/* reuse GL_CCW */
-/* reuse GL_CW */
 #define GL_MAX_PATCH_VERTICES             0x8E7D
 #define GL_MAX_TESS_GEN_LEVEL             0x8E7E
 #define GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS 0x8E7F
@@ -2388,29 +1730,109 @@ extern "C" {
 #define GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_EVALUATION_SHADER 0x84F1
 #define GL_TESS_EVALUATION_SHADER         0x8E87
 #define GL_TESS_CONTROL_SHADER            0x8E88
-#endif
-
-#ifndef GL_ARB_texture_buffer_object_rgb32
-/* reuse GL_RGB32F */
-/* reuse GL_RGB32UI */
-/* reuse GL_RGB32I */
-#endif
-
-#ifndef GL_ARB_transform_feedback2
 #define GL_TRANSFORM_FEEDBACK             0x8E22
-#define GL_TRANSFORM_FEEDBACK_PAUSED      0x8E23
-#define GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED GL_TRANSFORM_FEEDBACK_PAUSED
-#define GL_TRANSFORM_FEEDBACK_ACTIVE      0x8E24
-#define GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE GL_TRANSFORM_FEEDBACK_ACTIVE
+#define GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED 0x8E23
+#define GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE 0x8E24
 #define GL_TRANSFORM_FEEDBACK_BINDING     0x8E25
-#endif
-
-#ifndef GL_ARB_transform_feedback3
 #define GL_MAX_TRANSFORM_FEEDBACK_BUFFERS 0x8E70
-#define GL_MAX_VERTEX_STREAMS             0x8E71
+typedef void (APIENTRYP PFNGLMINSAMPLESHADINGPROC) (GLfloat value);
+typedef void (APIENTRYP PFNGLBLENDEQUATIONIPROC) (GLuint buf, GLenum mode);
+typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEIPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+typedef void (APIENTRYP PFNGLBLENDFUNCIPROC) (GLuint buf, GLenum src, GLenum dst);
+typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEIPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+typedef void (APIENTRYP PFNGLDRAWARRAYSINDIRECTPROC) (GLenum mode, const void *indirect);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINDIRECTPROC) (GLenum mode, GLenum type, const void *indirect);
+typedef void (APIENTRYP PFNGLUNIFORM1DPROC) (GLint location, GLdouble x);
+typedef void (APIENTRYP PFNGLUNIFORM2DPROC) (GLint location, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLUNIFORM3DPROC) (GLint location, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLUNIFORM4DPROC) (GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLUNIFORM1DVPROC) (GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORM2DVPROC) (GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORM3DVPROC) (GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORM4DVPROC) (GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLGETUNIFORMDVPROC) (GLuint program, GLint location, GLdouble *params);
+typedef GLint (APIENTRYP PFNGLGETSUBROUTINEUNIFORMLOCATIONPROC) (GLuint program, GLenum shadertype, const GLchar *name);
+typedef GLuint (APIENTRYP PFNGLGETSUBROUTINEINDEXPROC) (GLuint program, GLenum shadertype, const GLchar *name);
+typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINEUNIFORMIVPROC) (GLuint program, GLenum shadertype, GLuint index, GLenum pname, GLint *values);
+typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINEUNIFORMNAMEPROC) (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
+typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINENAMEPROC) (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
+typedef void (APIENTRYP PFNGLUNIFORMSUBROUTINESUIVPROC) (GLenum shadertype, GLsizei count, const GLuint *indices);
+typedef void (APIENTRYP PFNGLGETUNIFORMSUBROUTINEUIVPROC) (GLenum shadertype, GLint location, GLuint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMSTAGEIVPROC) (GLuint program, GLenum shadertype, GLenum pname, GLint *values);
+typedef void (APIENTRYP PFNGLPATCHPARAMETERIPROC) (GLenum pname, GLint value);
+typedef void (APIENTRYP PFNGLPATCHPARAMETERFVPROC) (GLenum pname, const GLfloat *values);
+typedef void (APIENTRYP PFNGLBINDTRANSFORMFEEDBACKPROC) (GLenum target, GLuint id);
+typedef void (APIENTRYP PFNGLDELETETRANSFORMFEEDBACKSPROC) (GLsizei n, const GLuint *ids);
+typedef void (APIENTRYP PFNGLGENTRANSFORMFEEDBACKSPROC) (GLsizei n, GLuint *ids);
+typedef GLboolean (APIENTRYP PFNGLISTRANSFORMFEEDBACKPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLPAUSETRANSFORMFEEDBACKPROC) (void);
+typedef void (APIENTRYP PFNGLRESUMETRANSFORMFEEDBACKPROC) (void);
+typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKPROC) (GLenum mode, GLuint id);
+typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKSTREAMPROC) (GLenum mode, GLuint id, GLuint stream);
+typedef void (APIENTRYP PFNGLBEGINQUERYINDEXEDPROC) (GLenum target, GLuint index, GLuint id);
+typedef void (APIENTRYP PFNGLENDQUERYINDEXEDPROC) (GLenum target, GLuint index);
+typedef void (APIENTRYP PFNGLGETQUERYINDEXEDIVPROC) (GLenum target, GLuint index, GLenum pname, GLint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMinSampleShading (GLfloat value);
+GLAPI void APIENTRY glBlendEquationi (GLuint buf, GLenum mode);
+GLAPI void APIENTRY glBlendEquationSeparatei (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+GLAPI void APIENTRY glBlendFunci (GLuint buf, GLenum src, GLenum dst);
+GLAPI void APIENTRY glBlendFuncSeparatei (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+GLAPI void APIENTRY glDrawArraysIndirect (GLenum mode, const void *indirect);
+GLAPI void APIENTRY glDrawElementsIndirect (GLenum mode, GLenum type, const void *indirect);
+GLAPI void APIENTRY glUniform1d (GLint location, GLdouble x);
+GLAPI void APIENTRY glUniform2d (GLint location, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glUniform3d (GLint location, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glUniform4d (GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glUniform1dv (GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glUniform2dv (GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glUniform3dv (GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glUniform4dv (GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix2x3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix2x4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix3x2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix3x4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix4x2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glUniformMatrix4x3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glGetUniformdv (GLuint program, GLint location, GLdouble *params);
+GLAPI GLint APIENTRY glGetSubroutineUniformLocation (GLuint program, GLenum shadertype, const GLchar *name);
+GLAPI GLuint APIENTRY glGetSubroutineIndex (GLuint program, GLenum shadertype, const GLchar *name);
+GLAPI void APIENTRY glGetActiveSubroutineUniformiv (GLuint program, GLenum shadertype, GLuint index, GLenum pname, GLint *values);
+GLAPI void APIENTRY glGetActiveSubroutineUniformName (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
+GLAPI void APIENTRY glGetActiveSubroutineName (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
+GLAPI void APIENTRY glUniformSubroutinesuiv (GLenum shadertype, GLsizei count, const GLuint *indices);
+GLAPI void APIENTRY glGetUniformSubroutineuiv (GLenum shadertype, GLint location, GLuint *params);
+GLAPI void APIENTRY glGetProgramStageiv (GLuint program, GLenum shadertype, GLenum pname, GLint *values);
+GLAPI void APIENTRY glPatchParameteri (GLenum pname, GLint value);
+GLAPI void APIENTRY glPatchParameterfv (GLenum pname, const GLfloat *values);
+GLAPI void APIENTRY glBindTransformFeedback (GLenum target, GLuint id);
+GLAPI void APIENTRY glDeleteTransformFeedbacks (GLsizei n, const GLuint *ids);
+GLAPI void APIENTRY glGenTransformFeedbacks (GLsizei n, GLuint *ids);
+GLAPI GLboolean APIENTRY glIsTransformFeedback (GLuint id);
+GLAPI void APIENTRY glPauseTransformFeedback (void);
+GLAPI void APIENTRY glResumeTransformFeedback (void);
+GLAPI void APIENTRY glDrawTransformFeedback (GLenum mode, GLuint id);
+GLAPI void APIENTRY glDrawTransformFeedbackStream (GLenum mode, GLuint id, GLuint stream);
+GLAPI void APIENTRY glBeginQueryIndexed (GLenum target, GLuint index, GLuint id);
+GLAPI void APIENTRY glEndQueryIndexed (GLenum target, GLuint index);
+GLAPI void APIENTRY glGetQueryIndexediv (GLenum target, GLuint index, GLenum pname, GLint *params);
 #endif
+#endif /* GL_VERSION_4_0 */
 
-#ifndef GL_ARB_ES2_compatibility
+#ifndef GL_VERSION_4_1
+#define GL_VERSION_4_1 1
 #define GL_FIXED                          0x140C
 #define GL_IMPLEMENTATION_COLOR_READ_TYPE 0x8B9A
 #define GL_IMPLEMENTATION_COLOR_READ_FORMAT 0x8B9B
@@ -2427,16 +1849,10 @@ extern "C" {
 #define GL_MAX_VARYING_VECTORS            0x8DFC
 #define GL_MAX_FRAGMENT_UNIFORM_VECTORS   0x8DFD
 #define GL_RGB565                         0x8D62
-#endif
-
-#ifndef GL_ARB_get_program_binary
 #define GL_PROGRAM_BINARY_RETRIEVABLE_HINT 0x8257
 #define GL_PROGRAM_BINARY_LENGTH          0x8741
 #define GL_NUM_PROGRAM_BINARY_FORMATS     0x87FE
 #define GL_PROGRAM_BINARY_FORMATS         0x87FF
-#endif
-
-#ifndef GL_ARB_separate_shader_objects
 #define GL_VERTEX_SHADER_BIT              0x00000001
 #define GL_FRAGMENT_SHADER_BIT            0x00000002
 #define GL_GEOMETRY_SHADER_BIT            0x00000004
@@ -2446,97 +1862,194 @@ extern "C" {
 #define GL_PROGRAM_SEPARABLE              0x8258
 #define GL_ACTIVE_PROGRAM                 0x8259
 #define GL_PROGRAM_PIPELINE_BINDING       0x825A
-#endif
-
-#ifndef GL_ARB_shader_precision
-#endif
-
-#ifndef GL_ARB_vertex_attrib_64bit
-/* reuse GL_RGB32I */
-/* reuse GL_DOUBLE_VEC2 */
-/* reuse GL_DOUBLE_VEC3 */
-/* reuse GL_DOUBLE_VEC4 */
-/* reuse GL_DOUBLE_MAT2 */
-/* reuse GL_DOUBLE_MAT3 */
-/* reuse GL_DOUBLE_MAT4 */
-/* reuse GL_DOUBLE_MAT2x3 */
-/* reuse GL_DOUBLE_MAT2x4 */
-/* reuse GL_DOUBLE_MAT3x2 */
-/* reuse GL_DOUBLE_MAT3x4 */
-/* reuse GL_DOUBLE_MAT4x2 */
-/* reuse GL_DOUBLE_MAT4x3 */
-#endif
-
-#ifndef GL_ARB_viewport_array
-/* reuse GL_SCISSOR_BOX */
-/* reuse GL_VIEWPORT */
-/* reuse GL_DEPTH_RANGE */
-/* reuse GL_SCISSOR_TEST */
 #define GL_MAX_VIEWPORTS                  0x825B
 #define GL_VIEWPORT_SUBPIXEL_BITS         0x825C
 #define GL_VIEWPORT_BOUNDS_RANGE          0x825D
 #define GL_LAYER_PROVOKING_VERTEX         0x825E
 #define GL_VIEWPORT_INDEX_PROVOKING_VERTEX 0x825F
 #define GL_UNDEFINED_VERTEX               0x8260
-/* reuse GL_FIRST_VERTEX_CONVENTION */
-/* reuse GL_LAST_VERTEX_CONVENTION */
-/* reuse GL_PROVOKING_VERTEX */
-#endif
-
-#ifndef GL_ARB_cl_event
-#define GL_SYNC_CL_EVENT_ARB              0x8240
-#define GL_SYNC_CL_EVENT_COMPLETE_ARB     0x8241
-#endif
-
-#ifndef GL_ARB_debug_output
-#define GL_DEBUG_OUTPUT_SYNCHRONOUS_ARB   0x8242
-#define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH_ARB 0x8243
-#define GL_DEBUG_CALLBACK_FUNCTION_ARB    0x8244
-#define GL_DEBUG_CALLBACK_USER_PARAM_ARB  0x8245
-#define GL_DEBUG_SOURCE_API_ARB           0x8246
-#define GL_DEBUG_SOURCE_WINDOW_SYSTEM_ARB 0x8247
-#define GL_DEBUG_SOURCE_SHADER_COMPILER_ARB 0x8248
-#define GL_DEBUG_SOURCE_THIRD_PARTY_ARB   0x8249
-#define GL_DEBUG_SOURCE_APPLICATION_ARB   0x824A
-#define GL_DEBUG_SOURCE_OTHER_ARB         0x824B
-#define GL_DEBUG_TYPE_ERROR_ARB           0x824C
-#define GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR_ARB 0x824D
-#define GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR_ARB 0x824E
-#define GL_DEBUG_TYPE_PORTABILITY_ARB     0x824F
-#define GL_DEBUG_TYPE_PERFORMANCE_ARB     0x8250
-#define GL_DEBUG_TYPE_OTHER_ARB           0x8251
-#define GL_MAX_DEBUG_MESSAGE_LENGTH_ARB   0x9143
-#define GL_MAX_DEBUG_LOGGED_MESSAGES_ARB  0x9144
-#define GL_DEBUG_LOGGED_MESSAGES_ARB      0x9145
-#define GL_DEBUG_SEVERITY_HIGH_ARB        0x9146
-#define GL_DEBUG_SEVERITY_MEDIUM_ARB      0x9147
-#define GL_DEBUG_SEVERITY_LOW_ARB         0x9148
-#endif
-
-#ifndef GL_ARB_robustness
-/* reuse GL_NO_ERROR */
-#define GL_CONTEXT_FLAG_ROBUST_ACCESS_BIT_ARB 0x00000004
-#define GL_LOSE_CONTEXT_ON_RESET_ARB      0x8252
-#define GL_GUILTY_CONTEXT_RESET_ARB       0x8253
-#define GL_INNOCENT_CONTEXT_RESET_ARB     0x8254
-#define GL_UNKNOWN_CONTEXT_RESET_ARB      0x8255
-#define GL_RESET_NOTIFICATION_STRATEGY_ARB 0x8256
-#define GL_NO_RESET_NOTIFICATION_ARB      0x8261
-#endif
-
-#ifndef GL_ARB_shader_stencil_export
-#endif
-
-#ifndef GL_ARB_base_instance
-#endif
-
-#ifndef GL_ARB_shading_language_420pack
-#endif
-
-#ifndef GL_ARB_transform_feedback_instanced
+typedef void (APIENTRYP PFNGLRELEASESHADERCOMPILERPROC) (void);
+typedef void (APIENTRYP PFNGLSHADERBINARYPROC) (GLsizei count, const GLuint *shaders, GLenum binaryformat, const void *binary, GLsizei length);
+typedef void (APIENTRYP PFNGLGETSHADERPRECISIONFORMATPROC) (GLenum shadertype, GLenum precisiontype, GLint *range, GLint *precision);
+typedef void (APIENTRYP PFNGLDEPTHRANGEFPROC) (GLfloat n, GLfloat f);
+typedef void (APIENTRYP PFNGLCLEARDEPTHFPROC) (GLfloat d);
+typedef void (APIENTRYP PFNGLGETPROGRAMBINARYPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, void *binary);
+typedef void (APIENTRYP PFNGLPROGRAMBINARYPROC) (GLuint program, GLenum binaryFormat, const void *binary, GLsizei length);
+typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIPROC) (GLuint program, GLenum pname, GLint value);
+typedef void (APIENTRYP PFNGLUSEPROGRAMSTAGESPROC) (GLuint pipeline, GLbitfield stages, GLuint program);
+typedef void (APIENTRYP PFNGLACTIVESHADERPROGRAMPROC) (GLuint pipeline, GLuint program);
+typedef GLuint (APIENTRYP PFNGLCREATESHADERPROGRAMVPROC) (GLenum type, GLsizei count, const GLchar *const*strings);
+typedef void (APIENTRYP PFNGLBINDPROGRAMPIPELINEPROC) (GLuint pipeline);
+typedef void (APIENTRYP PFNGLDELETEPROGRAMPIPELINESPROC) (GLsizei n, const GLuint *pipelines);
+typedef void (APIENTRYP PFNGLGENPROGRAMPIPELINESPROC) (GLsizei n, GLuint *pipelines);
+typedef GLboolean (APIENTRYP PFNGLISPROGRAMPIPELINEPROC) (GLuint pipeline);
+typedef void (APIENTRYP PFNGLGETPROGRAMPIPELINEIVPROC) (GLuint pipeline, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IPROC) (GLuint program, GLint location, GLint v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FPROC) (GLuint program, GLint location, GLfloat v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DPROC) (GLuint program, GLint location, GLdouble v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIPROC) (GLuint program, GLint location, GLuint v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IPROC) (GLuint program, GLint location, GLint v0, GLint v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2, GLdouble v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLVALIDATEPROGRAMPIPELINEPROC) (GLuint pipeline);
+typedef void (APIENTRYP PFNGLGETPROGRAMPIPELINEINFOLOGPROC) (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DPROC) (GLuint index, GLdouble x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DPROC) (GLuint index, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DVPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBLPOINTERPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLDVPROC) (GLuint index, GLenum pname, GLdouble *params);
+typedef void (APIENTRYP PFNGLVIEWPORTARRAYVPROC) (GLuint first, GLsizei count, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVIEWPORTINDEXEDFPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat w, GLfloat h);
+typedef void (APIENTRYP PFNGLVIEWPORTINDEXEDFVPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLSCISSORARRAYVPROC) (GLuint first, GLsizei count, const GLint *v);
+typedef void (APIENTRYP PFNGLSCISSORINDEXEDPROC) (GLuint index, GLint left, GLint bottom, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLSCISSORINDEXEDVPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLDEPTHRANGEARRAYVPROC) (GLuint first, GLsizei count, const GLdouble *v);
+typedef void (APIENTRYP PFNGLDEPTHRANGEINDEXEDPROC) (GLuint index, GLdouble n, GLdouble f);
+typedef void (APIENTRYP PFNGLGETFLOATI_VPROC) (GLenum target, GLuint index, GLfloat *data);
+typedef void (APIENTRYP PFNGLGETDOUBLEI_VPROC) (GLenum target, GLuint index, GLdouble *data);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glReleaseShaderCompiler (void);
+GLAPI void APIENTRY glShaderBinary (GLsizei count, const GLuint *shaders, GLenum binaryformat, const void *binary, GLsizei length);
+GLAPI void APIENTRY glGetShaderPrecisionFormat (GLenum shadertype, GLenum precisiontype, GLint *range, GLint *precision);
+GLAPI void APIENTRY glDepthRangef (GLfloat n, GLfloat f);
+GLAPI void APIENTRY glClearDepthf (GLfloat d);
+GLAPI void APIENTRY glGetProgramBinary (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, void *binary);
+GLAPI void APIENTRY glProgramBinary (GLuint program, GLenum binaryFormat, const void *binary, GLsizei length);
+GLAPI void APIENTRY glProgramParameteri (GLuint program, GLenum pname, GLint value);
+GLAPI void APIENTRY glUseProgramStages (GLuint pipeline, GLbitfield stages, GLuint program);
+GLAPI void APIENTRY glActiveShaderProgram (GLuint pipeline, GLuint program);
+GLAPI GLuint APIENTRY glCreateShaderProgramv (GLenum type, GLsizei count, const GLchar *const*strings);
+GLAPI void APIENTRY glBindProgramPipeline (GLuint pipeline);
+GLAPI void APIENTRY glDeleteProgramPipelines (GLsizei n, const GLuint *pipelines);
+GLAPI void APIENTRY glGenProgramPipelines (GLsizei n, GLuint *pipelines);
+GLAPI GLboolean APIENTRY glIsProgramPipeline (GLuint pipeline);
+GLAPI void APIENTRY glGetProgramPipelineiv (GLuint pipeline, GLenum pname, GLint *params);
+GLAPI void APIENTRY glProgramUniform1i (GLuint program, GLint location, GLint v0);
+GLAPI void APIENTRY glProgramUniform1iv (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform1f (GLuint program, GLint location, GLfloat v0);
+GLAPI void APIENTRY glProgramUniform1fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform1d (GLuint program, GLint location, GLdouble v0);
+GLAPI void APIENTRY glProgramUniform1dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform1ui (GLuint program, GLint location, GLuint v0);
+GLAPI void APIENTRY glProgramUniform1uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniform2i (GLuint program, GLint location, GLint v0, GLint v1);
+GLAPI void APIENTRY glProgramUniform2iv (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform2f (GLuint program, GLint location, GLfloat v0, GLfloat v1);
+GLAPI void APIENTRY glProgramUniform2fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform2d (GLuint program, GLint location, GLdouble v0, GLdouble v1);
+GLAPI void APIENTRY glProgramUniform2dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform2ui (GLuint program, GLint location, GLuint v0, GLuint v1);
+GLAPI void APIENTRY glProgramUniform2uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniform3i (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
+GLAPI void APIENTRY glProgramUniform3iv (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform3f (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+GLAPI void APIENTRY glProgramUniform3fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform3d (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2);
+GLAPI void APIENTRY glProgramUniform3dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform3ui (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
+GLAPI void APIENTRY glProgramUniform3uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniform4i (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+GLAPI void APIENTRY glProgramUniform4iv (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform4f (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+GLAPI void APIENTRY glProgramUniform4fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform4d (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2, GLdouble v3);
+GLAPI void APIENTRY glProgramUniform4dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform4ui (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+GLAPI void APIENTRY glProgramUniform4uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniformMatrix2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glValidateProgramPipeline (GLuint pipeline);
+GLAPI void APIENTRY glGetProgramPipelineInfoLog (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
+GLAPI void APIENTRY glVertexAttribL1d (GLuint index, GLdouble x);
+GLAPI void APIENTRY glVertexAttribL2d (GLuint index, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glVertexAttribL3d (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glVertexAttribL4d (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glVertexAttribL1dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribL2dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribL3dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribL4dv (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribLPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glGetVertexAttribLdv (GLuint index, GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glViewportArrayv (GLuint first, GLsizei count, const GLfloat *v);
+GLAPI void APIENTRY glViewportIndexedf (GLuint index, GLfloat x, GLfloat y, GLfloat w, GLfloat h);
+GLAPI void APIENTRY glViewportIndexedfv (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glScissorArrayv (GLuint first, GLsizei count, const GLint *v);
+GLAPI void APIENTRY glScissorIndexed (GLuint index, GLint left, GLint bottom, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glScissorIndexedv (GLuint index, const GLint *v);
+GLAPI void APIENTRY glDepthRangeArrayv (GLuint first, GLsizei count, const GLdouble *v);
+GLAPI void APIENTRY glDepthRangeIndexed (GLuint index, GLdouble n, GLdouble f);
+GLAPI void APIENTRY glGetFloati_v (GLenum target, GLuint index, GLfloat *data);
+GLAPI void APIENTRY glGetDoublei_v (GLenum target, GLuint index, GLdouble *data);
 #endif
+#endif /* GL_VERSION_4_1 */
 
-#ifndef GL_ARB_compressed_texture_pixel_storage
+#ifndef GL_VERSION_4_2
+#define GL_VERSION_4_2 1
 #define GL_UNPACK_COMPRESSED_BLOCK_WIDTH  0x9127
 #define GL_UNPACK_COMPRESSED_BLOCK_HEIGHT 0x9128
 #define GL_UNPACK_COMPRESSED_BLOCK_DEPTH  0x9129
@@ -2545,20 +2058,8 @@ extern "C" {
 #define GL_PACK_COMPRESSED_BLOCK_HEIGHT   0x912C
 #define GL_PACK_COMPRESSED_BLOCK_DEPTH    0x912D
 #define GL_PACK_COMPRESSED_BLOCK_SIZE     0x912E
-#endif
-
-#ifndef GL_ARB_conservative_depth
-#endif
-
-#ifndef GL_ARB_internalformat_query
 #define GL_NUM_SAMPLE_COUNTS              0x9380
-#endif
-
-#ifndef GL_ARB_map_buffer_alignment
 #define GL_MIN_MAP_BUFFER_ALIGNMENT       0x90BC
-#endif
-
-#ifndef GL_ARB_shader_atomic_counters
 #define GL_ATOMIC_COUNTER_BUFFER          0x92C0
 #define GL_ATOMIC_COUNTER_BUFFER_BINDING  0x92C1
 #define GL_ATOMIC_COUNTER_BUFFER_START    0x92C2
@@ -2588,9 +2089,6 @@ extern "C" {
 #define GL_ACTIVE_ATOMIC_COUNTER_BUFFERS  0x92D9
 #define GL_UNIFORM_ATOMIC_COUNTER_BUFFER_INDEX 0x92DA
 #define GL_UNSIGNED_INT_ATOMIC_COUNTER    0x92DB
-#endif
-
-#ifndef GL_ARB_shader_image_load_store
 #define GL_VERTEX_ATTRIB_ARRAY_BARRIER_BIT 0x00000001
 #define GL_ELEMENT_ARRAY_BARRIER_BIT      0x00000002
 #define GL_UNIFORM_BARRIER_BIT            0x00000004
@@ -2655,47 +2153,75 @@ extern "C" {
 #define GL_MAX_GEOMETRY_IMAGE_UNIFORMS    0x90CD
 #define GL_MAX_FRAGMENT_IMAGE_UNIFORMS    0x90CE
 #define GL_MAX_COMBINED_IMAGE_UNIFORMS    0x90CF
-#endif
-
-#ifndef GL_ARB_shading_language_packing
-#endif
-
-#ifndef GL_ARB_texture_storage
+#define GL_COMPRESSED_RGBA_BPTC_UNORM     0x8E8C
+#define GL_COMPRESSED_SRGB_ALPHA_BPTC_UNORM 0x8E8D
+#define GL_COMPRESSED_RGB_BPTC_SIGNED_FLOAT 0x8E8E
+#define GL_COMPRESSED_RGB_BPTC_UNSIGNED_FLOAT 0x8E8F
 #define GL_TEXTURE_IMMUTABLE_FORMAT       0x912F
+typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDBASEINSTANCEPROC) (GLenum mode, GLint first, GLsizei count, GLsizei instancecount, GLuint baseinstance);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEINSTANCEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLuint baseinstance);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEVERTEXBASEINSTANCEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLint basevertex, GLuint baseinstance);
+typedef void (APIENTRYP PFNGLGETINTERNALFORMATIVPROC) (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint *params);
+typedef void (APIENTRYP PFNGLGETACTIVEATOMICCOUNTERBUFFERIVPROC) (GLuint program, GLuint bufferIndex, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLBINDIMAGETEXTUREPROC) (GLuint unit, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLenum format);
+typedef void (APIENTRYP PFNGLMEMORYBARRIERPROC) (GLbitfield barriers);
+typedef void (APIENTRYP PFNGLTEXSTORAGE1DPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
+typedef void (APIENTRYP PFNGLTEXSTORAGE2DPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLTEXSTORAGE3DPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKINSTANCEDPROC) (GLenum mode, GLuint id, GLsizei instancecount);
+typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKSTREAMINSTANCEDPROC) (GLenum mode, GLuint id, GLuint stream, GLsizei instancecount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawArraysInstancedBaseInstance (GLenum mode, GLint first, GLsizei count, GLsizei instancecount, GLuint baseinstance);
+GLAPI void APIENTRY glDrawElementsInstancedBaseInstance (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLuint baseinstance);
+GLAPI void APIENTRY glDrawElementsInstancedBaseVertexBaseInstance (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLint basevertex, GLuint baseinstance);
+GLAPI void APIENTRY glGetInternalformativ (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint *params);
+GLAPI void APIENTRY glGetActiveAtomicCounterBufferiv (GLuint program, GLuint bufferIndex, GLenum pname, GLint *params);
+GLAPI void APIENTRY glBindImageTexture (GLuint unit, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLenum format);
+GLAPI void APIENTRY glMemoryBarrier (GLbitfield barriers);
+GLAPI void APIENTRY glTexStorage1D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
+GLAPI void APIENTRY glTexStorage2D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glTexStorage3D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+GLAPI void APIENTRY glDrawTransformFeedbackInstanced (GLenum mode, GLuint id, GLsizei instancecount);
+GLAPI void APIENTRY glDrawTransformFeedbackStreamInstanced (GLenum mode, GLuint id, GLuint stream, GLsizei instancecount);
 #endif
+#endif /* GL_VERSION_4_2 */
 
-#ifndef GL_KHR_texture_compression_astc_ldr
-#define GL_COMPRESSED_RGBA_ASTC_4x4_KHR   0x93B0
-#define GL_COMPRESSED_RGBA_ASTC_5x4_KHR   0x93B1
-#define GL_COMPRESSED_RGBA_ASTC_5x5_KHR   0x93B2
-#define GL_COMPRESSED_RGBA_ASTC_6x5_KHR   0x93B3
-#define GL_COMPRESSED_RGBA_ASTC_6x6_KHR   0x93B4
-#define GL_COMPRESSED_RGBA_ASTC_8x5_KHR   0x93B5
-#define GL_COMPRESSED_RGBA_ASTC_8x6_KHR   0x93B6
-#define GL_COMPRESSED_RGBA_ASTC_8x8_KHR   0x93B7
-#define GL_COMPRESSED_RGBA_ASTC_10x5_KHR  0x93B8
-#define GL_COMPRESSED_RGBA_ASTC_10x6_KHR  0x93B9
-#define GL_COMPRESSED_RGBA_ASTC_10x8_KHR  0x93BA
-#define GL_COMPRESSED_RGBA_ASTC_10x10_KHR 0x93BB
-#define GL_COMPRESSED_RGBA_ASTC_12x10_KHR 0x93BC
-#define GL_COMPRESSED_RGBA_ASTC_12x12_KHR 0x93BD
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4_KHR 0x93D0
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x4_KHR 0x93D1
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5_KHR 0x93D2
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x5_KHR 0x93D3
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6_KHR 0x93D4
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x5_KHR 0x93D5
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x6_KHR 0x93D6
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x8_KHR 0x93D7
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x5_KHR 0x93D8
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x6_KHR 0x93D9
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x8_KHR 0x93DA
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x10_KHR 0x93DB
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x10_KHR 0x93DC
-#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x12_KHR 0x93DD
-#endif
-
-#ifndef GL_KHR_debug
+#ifndef GL_VERSION_4_3
+#define GL_VERSION_4_3 1
+typedef void (APIENTRY  *GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,const void *userParam);
+#define GL_NUM_SHADING_LANGUAGE_VERSIONS  0x82E9
+#define GL_VERTEX_ATTRIB_ARRAY_LONG       0x874E
+#define GL_COMPRESSED_RGB8_ETC2           0x9274
+#define GL_COMPRESSED_SRGB8_ETC2          0x9275
+#define GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2 0x9276
+#define GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2 0x9277
+#define GL_COMPRESSED_RGBA8_ETC2_EAC      0x9278
+#define GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC 0x9279
+#define GL_COMPRESSED_R11_EAC             0x9270
+#define GL_COMPRESSED_SIGNED_R11_EAC      0x9271
+#define GL_COMPRESSED_RG11_EAC            0x9272
+#define GL_COMPRESSED_SIGNED_RG11_EAC     0x9273
+#define GL_PRIMITIVE_RESTART_FIXED_INDEX  0x8D69
+#define GL_ANY_SAMPLES_PASSED_CONSERVATIVE 0x8D6A
+#define GL_MAX_ELEMENT_INDEX              0x8D6B
+#define GL_COMPUTE_SHADER                 0x91B9
+#define GL_MAX_COMPUTE_UNIFORM_BLOCKS     0x91BB
+#define GL_MAX_COMPUTE_TEXTURE_IMAGE_UNITS 0x91BC
+#define GL_MAX_COMPUTE_IMAGE_UNIFORMS     0x91BD
+#define GL_MAX_COMPUTE_SHARED_MEMORY_SIZE 0x8262
+#define GL_MAX_COMPUTE_UNIFORM_COMPONENTS 0x8263
+#define GL_MAX_COMPUTE_ATOMIC_COUNTER_BUFFERS 0x8264
+#define GL_MAX_COMPUTE_ATOMIC_COUNTERS    0x8265
+#define GL_MAX_COMBINED_COMPUTE_UNIFORM_COMPONENTS 0x8266
+#define GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS 0x90EB
+#define GL_MAX_COMPUTE_WORK_GROUP_COUNT   0x91BE
+#define GL_MAX_COMPUTE_WORK_GROUP_SIZE    0x91BF
+#define GL_COMPUTE_WORK_GROUP_SIZE        0x8267
+#define GL_UNIFORM_BLOCK_REFERENCED_BY_COMPUTE_SHADER 0x90EC
+#define GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_COMPUTE_SHADER 0x90ED
+#define GL_DISPATCH_INDIRECT_BUFFER       0x90EE
+#define GL_DISPATCH_INDIRECT_BUFFER_BINDING 0x90EF
+#define GL_COMPUTE_SHADER_BIT             0x00000020
 #define GL_DEBUG_OUTPUT_SYNCHRONOUS       0x8242
 #define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH 0x8243
 #define GL_DEBUG_CALLBACK_FUNCTION        0x8244
@@ -2712,6 +2238,12 @@ extern "C" {
 #define GL_DEBUG_TYPE_PORTABILITY         0x824F
 #define GL_DEBUG_TYPE_PERFORMANCE         0x8250
 #define GL_DEBUG_TYPE_OTHER               0x8251
+#define GL_MAX_DEBUG_MESSAGE_LENGTH       0x9143
+#define GL_MAX_DEBUG_LOGGED_MESSAGES      0x9144
+#define GL_DEBUG_LOGGED_MESSAGES          0x9145
+#define GL_DEBUG_SEVERITY_HIGH            0x9146
+#define GL_DEBUG_SEVERITY_MEDIUM          0x9147
+#define GL_DEBUG_SEVERITY_LOW             0x9148
 #define GL_DEBUG_TYPE_MARKER              0x8268
 #define GL_DEBUG_TYPE_PUSH_GROUP          0x8269
 #define GL_DEBUG_TYPE_POP_GROUP           0x826A
@@ -2724,96 +2256,10 @@ extern "C" {
 #define GL_QUERY                          0x82E3
 #define GL_PROGRAM_PIPELINE               0x82E4
 #define GL_SAMPLER                        0x82E6
-#define GL_DISPLAY_LIST                   0x82E7
-/* DISPLAY_LIST used in compatibility profile only */
 #define GL_MAX_LABEL_LENGTH               0x82E8
-#define GL_MAX_DEBUG_MESSAGE_LENGTH       0x9143
-#define GL_MAX_DEBUG_LOGGED_MESSAGES      0x9144
-#define GL_DEBUG_LOGGED_MESSAGES          0x9145
-#define GL_DEBUG_SEVERITY_HIGH            0x9146
-#define GL_DEBUG_SEVERITY_MEDIUM          0x9147
-#define GL_DEBUG_SEVERITY_LOW             0x9148
 #define GL_DEBUG_OUTPUT                   0x92E0
 #define GL_CONTEXT_FLAG_DEBUG_BIT         0x00000002
-/* reuse GL_STACK_UNDERFLOW */
-/* reuse GL_STACK_OVERFLOW */
-#endif
-
-#ifndef GL_ARB_arrays_of_arrays
-#endif
-
-#ifndef GL_ARB_clear_buffer_object
-#endif
-
-#ifndef GL_ARB_compute_shader
-#define GL_COMPUTE_SHADER                 0x91B9
-#define GL_MAX_COMPUTE_UNIFORM_BLOCKS     0x91BB
-#define GL_MAX_COMPUTE_TEXTURE_IMAGE_UNITS 0x91BC
-#define GL_MAX_COMPUTE_IMAGE_UNIFORMS     0x91BD
-#define GL_MAX_COMPUTE_SHARED_MEMORY_SIZE 0x8262
-#define GL_MAX_COMPUTE_UNIFORM_COMPONENTS 0x8263
-#define GL_MAX_COMPUTE_ATOMIC_COUNTER_BUFFERS 0x8264
-#define GL_MAX_COMPUTE_ATOMIC_COUNTERS    0x8265
-#define GL_MAX_COMBINED_COMPUTE_UNIFORM_COMPONENTS 0x8266
-#define GL_MAX_COMPUTE_LOCAL_INVOCATIONS  0x90EB
-#define GL_MAX_COMPUTE_WORK_GROUP_COUNT   0x91BE
-#define GL_MAX_COMPUTE_WORK_GROUP_SIZE    0x91BF
-#define GL_COMPUTE_LOCAL_WORK_SIZE        0x8267
-#define GL_UNIFORM_BLOCK_REFERENCED_BY_COMPUTE_SHADER 0x90EC
-#define GL_ATOMIC_COUNTER_BUFFER_REFERENCED_BY_COMPUTE_SHADER 0x90ED
-#define GL_DISPATCH_INDIRECT_BUFFER       0x90EE
-#define GL_DISPATCH_INDIRECT_BUFFER_BINDING 0x90EF
-#define GL_COMPUTE_SHADER_BIT             0x00000020
-#endif
-
-#ifndef GL_ARB_copy_image
-#endif
-
-#ifndef GL_ARB_texture_view
-#define GL_TEXTURE_VIEW_MIN_LEVEL         0x82DB
-#define GL_TEXTURE_VIEW_NUM_LEVELS        0x82DC
-#define GL_TEXTURE_VIEW_MIN_LAYER         0x82DD
-#define GL_TEXTURE_VIEW_NUM_LAYERS        0x82DE
-#define GL_TEXTURE_IMMUTABLE_LEVELS       0x82DF
-#endif
-
-#ifndef GL_ARB_vertex_attrib_binding
-#define GL_VERTEX_ATTRIB_BINDING          0x82D4
-#define GL_VERTEX_ATTRIB_RELATIVE_OFFSET  0x82D5
-#define GL_VERTEX_BINDING_DIVISOR         0x82D6
-#define GL_VERTEX_BINDING_OFFSET          0x82D7
-#define GL_VERTEX_BINDING_STRIDE          0x82D8
-#define GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET 0x82D9
-#define GL_MAX_VERTEX_ATTRIB_BINDINGS     0x82DA
-#endif
-
-#ifndef GL_ARB_robustness_isolation
-#endif
-
-#ifndef GL_ARB_ES3_compatibility
-#define GL_COMPRESSED_RGB8_ETC2           0x9274
-#define GL_COMPRESSED_SRGB8_ETC2          0x9275
-#define GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2 0x9276
-#define GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2 0x9277
-#define GL_COMPRESSED_RGBA8_ETC2_EAC      0x9278
-#define GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC 0x9279
-#define GL_COMPRESSED_R11_EAC             0x9270
-#define GL_COMPRESSED_SIGNED_R11_EAC      0x9271
-#define GL_COMPRESSED_RG11_EAC            0x9272
-#define GL_COMPRESSED_SIGNED_RG11_EAC     0x9273
-#define GL_PRIMITIVE_RESTART_FIXED_INDEX  0x8D69
-#define GL_ANY_SAMPLES_PASSED_CONSERVATIVE 0x8D6A
-#define GL_MAX_ELEMENT_INDEX              0x8D6B
-#endif
-
-#ifndef GL_ARB_explicit_uniform_location
 #define GL_MAX_UNIFORM_LOCATIONS          0x826E
-#endif
-
-#ifndef GL_ARB_fragment_layer_viewport
-#endif
-
-#ifndef GL_ARB_framebuffer_no_attachments
 #define GL_FRAMEBUFFER_DEFAULT_WIDTH      0x9310
 #define GL_FRAMEBUFFER_DEFAULT_HEIGHT     0x9311
 #define GL_FRAMEBUFFER_DEFAULT_LAYERS     0x9312
@@ -2823,25 +2269,6 @@ extern "C" {
 #define GL_MAX_FRAMEBUFFER_HEIGHT         0x9316
 #define GL_MAX_FRAMEBUFFER_LAYERS         0x9317
 #define GL_MAX_FRAMEBUFFER_SAMPLES        0x9318
-#endif
-
-#ifndef GL_ARB_internalformat_query2
-/* reuse GL_IMAGE_FORMAT_COMPATIBILITY_TYPE */
-/* reuse GL_NUM_SAMPLE_COUNTS */
-/* reuse GL_RENDERBUFFER */
-/* reuse GL_SAMPLES */
-/* reuse GL_TEXTURE_1D */
-/* reuse GL_TEXTURE_1D_ARRAY */
-/* reuse GL_TEXTURE_2D */
-/* reuse GL_TEXTURE_2D_ARRAY */
-/* reuse GL_TEXTURE_3D */
-/* reuse GL_TEXTURE_CUBE_MAP */
-/* reuse GL_TEXTURE_CUBE_MAP_ARRAY */
-/* reuse GL_TEXTURE_RECTANGLE */
-/* reuse GL_TEXTURE_BUFFER */
-/* reuse GL_TEXTURE_2D_MULTISAMPLE */
-/* reuse GL_TEXTURE_2D_MULTISAMPLE_ARRAY */
-/* reuse GL_TEXTURE_COMPRESSED */
 #define GL_INTERNALFORMAT_SUPPORTED       0x826F
 #define GL_INTERNALFORMAT_PREFERRED       0x8270
 #define GL_INTERNALFORMAT_RED_SIZE        0x8271
@@ -2884,7 +2311,6 @@ extern "C" {
 #define GL_COLOR_ENCODING                 0x8296
 #define GL_SRGB_READ                      0x8297
 #define GL_SRGB_WRITE                     0x8298
-#define GL_SRGB_DECODE_ARB                0x8299
 #define GL_FILTER                         0x829A
 #define GL_VERTEX_TEXTURE                 0x829B
 #define GL_TESS_CONTROL_TEXTURE           0x829C
@@ -2941,22 +2367,12 @@ extern "C" {
 #define GL_VIEW_CLASS_RGTC2_RG            0x82D1
 #define GL_VIEW_CLASS_BPTC_UNORM          0x82D2
 #define GL_VIEW_CLASS_BPTC_FLOAT          0x82D3
-#endif
-
-#ifndef GL_ARB_invalidate_subdata
-#endif
-
-#ifndef GL_ARB_multi_draw_indirect
-#endif
-
-#ifndef GL_ARB_program_interface_query
 #define GL_UNIFORM                        0x92E1
 #define GL_UNIFORM_BLOCK                  0x92E2
 #define GL_PROGRAM_INPUT                  0x92E3
 #define GL_PROGRAM_OUTPUT                 0x92E4
 #define GL_BUFFER_VARIABLE                0x92E5
 #define GL_SHADER_STORAGE_BLOCK           0x92E6
-/* reuse GL_ATOMIC_COUNTER_BUFFER */
 #define GL_VERTEX_SUBROUTINE              0x92E8
 #define GL_TESS_CONTROL_SUBROUTINE        0x92E9
 #define GL_TESS_EVALUATION_SUBROUTINE     0x92EA
@@ -2998,17 +2414,6 @@ extern "C" {
 #define GL_LOCATION                       0x930E
 #define GL_LOCATION_INDEX                 0x930F
 #define GL_IS_PER_PATCH                   0x92E7
-/* reuse GL_NUM_COMPATIBLE_SUBROUTINES */
-/* reuse GL_COMPATIBLE_SUBROUTINES */
-#endif
-
-#ifndef GL_ARB_robust_buffer_access_behavior
-#endif
-
-#ifndef GL_ARB_shader_image_size
-#endif
-
-#ifndef GL_ARB_shader_storage_buffer_object
 #define GL_SHADER_STORAGE_BUFFER          0x90D2
 #define GL_SHADER_STORAGE_BUFFER_BINDING  0x90D3
 #define GL_SHADER_STORAGE_BUFFER_START    0x90D4
@@ -3023,1506 +2428,3313 @@ extern "C" {
 #define GL_MAX_SHADER_STORAGE_BUFFER_BINDINGS 0x90DD
 #define GL_MAX_SHADER_STORAGE_BLOCK_SIZE  0x90DE
 #define GL_SHADER_STORAGE_BUFFER_OFFSET_ALIGNMENT 0x90DF
-#define GL_SHADER_STORAGE_BARRIER_BIT     0x2000
-#define GL_MAX_COMBINED_SHADER_OUTPUT_RESOURCES GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS
-/* reuse GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS */
-#endif
-
-#ifndef GL_ARB_stencil_texturing
+#define GL_SHADER_STORAGE_BARRIER_BIT     0x00002000
+#define GL_MAX_COMBINED_SHADER_OUTPUT_RESOURCES 0x8F39
 #define GL_DEPTH_STENCIL_TEXTURE_MODE     0x90EA
-#endif
-
-#ifndef GL_ARB_texture_buffer_range
 #define GL_TEXTURE_BUFFER_OFFSET          0x919D
 #define GL_TEXTURE_BUFFER_SIZE            0x919E
 #define GL_TEXTURE_BUFFER_OFFSET_ALIGNMENT 0x919F
+#define GL_TEXTURE_VIEW_MIN_LEVEL         0x82DB
+#define GL_TEXTURE_VIEW_NUM_LEVELS        0x82DC
+#define GL_TEXTURE_VIEW_MIN_LAYER         0x82DD
+#define GL_TEXTURE_VIEW_NUM_LAYERS        0x82DE
+#define GL_TEXTURE_IMMUTABLE_LEVELS       0x82DF
+#define GL_VERTEX_ATTRIB_BINDING          0x82D4
+#define GL_VERTEX_ATTRIB_RELATIVE_OFFSET  0x82D5
+#define GL_VERTEX_BINDING_DIVISOR         0x82D6
+#define GL_VERTEX_BINDING_OFFSET          0x82D7
+#define GL_VERTEX_BINDING_STRIDE          0x82D8
+#define GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET 0x82D9
+#define GL_MAX_VERTEX_ATTRIB_BINDINGS     0x82DA
+#define GL_VERTEX_BINDING_BUFFER          0x8F4F
+#define GL_DISPLAY_LIST                   0x82E7
+typedef void (APIENTRYP PFNGLCLEARBUFFERDATAPROC) (GLenum target, GLenum internalformat, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLCLEARBUFFERSUBDATAPROC) (GLenum target, GLenum internalformat, GLintptr offset, GLsizeiptr size, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLDISPATCHCOMPUTEPROC) (GLuint num_groups_x, GLuint num_groups_y, GLuint num_groups_z);
+typedef void (APIENTRYP PFNGLDISPATCHCOMPUTEINDIRECTPROC) (GLintptr indirect);
+typedef void (APIENTRYP PFNGLCOPYIMAGESUBDATAPROC) (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei srcWidth, GLsizei srcHeight, GLsizei srcDepth);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERPARAMETERIPROC) (GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLGETFRAMEBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETINTERNALFORMATI64VPROC) (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint64 *params);
+typedef void (APIENTRYP PFNGLINVALIDATETEXSUBIMAGEPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
+typedef void (APIENTRYP PFNGLINVALIDATETEXIMAGEPROC) (GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLINVALIDATEBUFFERSUBDATAPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length);
+typedef void (APIENTRYP PFNGLINVALIDATEBUFFERDATAPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLINVALIDATEFRAMEBUFFERPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments);
+typedef void (APIENTRYP PFNGLINVALIDATESUBFRAMEBUFFERPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTPROC) (GLenum mode, const void *indirect, GLsizei drawcount, GLsizei stride);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTPROC) (GLenum mode, GLenum type, const void *indirect, GLsizei drawcount, GLsizei stride);
+typedef void (APIENTRYP PFNGLGETPROGRAMINTERFACEIVPROC) (GLuint program, GLenum programInterface, GLenum pname, GLint *params);
+typedef GLuint (APIENTRYP PFNGLGETPROGRAMRESOURCEINDEXPROC) (GLuint program, GLenum programInterface, const GLchar *name);
+typedef void (APIENTRYP PFNGLGETPROGRAMRESOURCENAMEPROC) (GLuint program, GLenum programInterface, GLuint index, GLsizei bufSize, GLsizei *length, GLchar *name);
+typedef void (APIENTRYP PFNGLGETPROGRAMRESOURCEIVPROC) (GLuint program, GLenum programInterface, GLuint index, GLsizei propCount, const GLenum *props, GLsizei bufSize, GLsizei *length, GLint *params);
+typedef GLint (APIENTRYP PFNGLGETPROGRAMRESOURCELOCATIONPROC) (GLuint program, GLenum programInterface, const GLchar *name);
+typedef GLint (APIENTRYP PFNGLGETPROGRAMRESOURCELOCATIONINDEXPROC) (GLuint program, GLenum programInterface, const GLchar *name);
+typedef void (APIENTRYP PFNGLSHADERSTORAGEBLOCKBINDINGPROC) (GLuint program, GLuint storageBlockIndex, GLuint storageBlockBinding);
+typedef void (APIENTRYP PFNGLTEXBUFFERRANGEPROC) (GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLTEXSTORAGE2DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLTEXSTORAGE3DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLTEXTUREVIEWPROC) (GLuint texture, GLenum target, GLuint origtexture, GLenum internalformat, GLuint minlevel, GLuint numlevels, GLuint minlayer, GLuint numlayers);
+typedef void (APIENTRYP PFNGLBINDVERTEXBUFFERPROC) (GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBFORMATPROC) (GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBIFORMATPROC) (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBLFORMATPROC) (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBBINDINGPROC) (GLuint attribindex, GLuint bindingindex);
+typedef void (APIENTRYP PFNGLVERTEXBINDINGDIVISORPROC) (GLuint bindingindex, GLuint divisor);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGECONTROLPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKPROC) (GLDEBUGPROC callback, const void *userParam);
+typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGPROC) (GLuint count, GLsizei bufSize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+typedef void (APIENTRYP PFNGLPUSHDEBUGGROUPPROC) (GLenum source, GLuint id, GLsizei length, const GLchar *message);
+typedef void (APIENTRYP PFNGLPOPDEBUGGROUPPROC) (void);
+typedef void (APIENTRYP PFNGLOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
+typedef void (APIENTRYP PFNGLGETOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
+typedef void (APIENTRYP PFNGLOBJECTPTRLABELPROC) (const void *ptr, GLsizei length, const GLchar *label);
+typedef void (APIENTRYP PFNGLGETOBJECTPTRLABELPROC) (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glClearBufferData (GLenum target, GLenum internalformat, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glClearBufferSubData (GLenum target, GLenum internalformat, GLintptr offset, GLsizeiptr size, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glDispatchCompute (GLuint num_groups_x, GLuint num_groups_y, GLuint num_groups_z);
+GLAPI void APIENTRY glDispatchComputeIndirect (GLintptr indirect);
+GLAPI void APIENTRY glCopyImageSubData (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei srcWidth, GLsizei srcHeight, GLsizei srcDepth);
+GLAPI void APIENTRY glFramebufferParameteri (GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glGetFramebufferParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetInternalformati64v (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint64 *params);
+GLAPI void APIENTRY glInvalidateTexSubImage (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
+GLAPI void APIENTRY glInvalidateTexImage (GLuint texture, GLint level);
+GLAPI void APIENTRY glInvalidateBufferSubData (GLuint buffer, GLintptr offset, GLsizeiptr length);
+GLAPI void APIENTRY glInvalidateBufferData (GLuint buffer);
+GLAPI void APIENTRY glInvalidateFramebuffer (GLenum target, GLsizei numAttachments, const GLenum *attachments);
+GLAPI void APIENTRY glInvalidateSubFramebuffer (GLenum target, GLsizei numAttachments, const GLenum *attachments, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glMultiDrawArraysIndirect (GLenum mode, const void *indirect, GLsizei drawcount, GLsizei stride);
+GLAPI void APIENTRY glMultiDrawElementsIndirect (GLenum mode, GLenum type, const void *indirect, GLsizei drawcount, GLsizei stride);
+GLAPI void APIENTRY glGetProgramInterfaceiv (GLuint program, GLenum programInterface, GLenum pname, GLint *params);
+GLAPI GLuint APIENTRY glGetProgramResourceIndex (GLuint program, GLenum programInterface, const GLchar *name);
+GLAPI void APIENTRY glGetProgramResourceName (GLuint program, GLenum programInterface, GLuint index, GLsizei bufSize, GLsizei *length, GLchar *name);
+GLAPI void APIENTRY glGetProgramResourceiv (GLuint program, GLenum programInterface, GLuint index, GLsizei propCount, const GLenum *props, GLsizei bufSize, GLsizei *length, GLint *params);
+GLAPI GLint APIENTRY glGetProgramResourceLocation (GLuint program, GLenum programInterface, const GLchar *name);
+GLAPI GLint APIENTRY glGetProgramResourceLocationIndex (GLuint program, GLenum programInterface, const GLchar *name);
+GLAPI void APIENTRY glShaderStorageBlockBinding (GLuint program, GLuint storageBlockIndex, GLuint storageBlockBinding);
+GLAPI void APIENTRY glTexBufferRange (GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
+GLAPI void APIENTRY glTexStorage2DMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glTexStorage3DMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glTextureView (GLuint texture, GLenum target, GLuint origtexture, GLenum internalformat, GLuint minlevel, GLuint numlevels, GLuint minlayer, GLuint numlayers);
+GLAPI void APIENTRY glBindVertexBuffer (GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
+GLAPI void APIENTRY glVertexAttribFormat (GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexAttribIFormat (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexAttribLFormat (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexAttribBinding (GLuint attribindex, GLuint bindingindex);
+GLAPI void APIENTRY glVertexBindingDivisor (GLuint bindingindex, GLuint divisor);
+GLAPI void APIENTRY glDebugMessageControl (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+GLAPI void APIENTRY glDebugMessageInsert (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+GLAPI void APIENTRY glDebugMessageCallback (GLDEBUGPROC callback, const void *userParam);
+GLAPI GLuint APIENTRY glGetDebugMessageLog (GLuint count, GLsizei bufSize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+GLAPI void APIENTRY glPushDebugGroup (GLenum source, GLuint id, GLsizei length, const GLchar *message);
+GLAPI void APIENTRY glPopDebugGroup (void);
+GLAPI void APIENTRY glObjectLabel (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
+GLAPI void APIENTRY glGetObjectLabel (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
+GLAPI void APIENTRY glObjectPtrLabel (const void *ptr, GLsizei length, const GLchar *label);
+GLAPI void APIENTRY glGetObjectPtrLabel (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
 #endif
+#endif /* GL_VERSION_4_3 */
+
+#ifndef GL_VERSION_4_4
+#define GL_VERSION_4_4 1
+#define GL_MAX_VERTEX_ATTRIB_STRIDE       0x82E5
+#define GL_PRIMITIVE_RESTART_FOR_PATCHES_SUPPORTED 0x8221
+#define GL_TEXTURE_BUFFER_BINDING         0x8C2A
+#define GL_MAP_PERSISTENT_BIT             0x0040
+#define GL_MAP_COHERENT_BIT               0x0080
+#define GL_DYNAMIC_STORAGE_BIT            0x0100
+#define GL_CLIENT_STORAGE_BIT             0x0200
+#define GL_CLIENT_MAPPED_BUFFER_BARRIER_BIT 0x00004000
+#define GL_BUFFER_IMMUTABLE_STORAGE       0x821F
+#define GL_BUFFER_STORAGE_FLAGS           0x8220
+#define GL_CLEAR_TEXTURE                  0x9365
+#define GL_LOCATION_COMPONENT             0x934A
+#define GL_TRANSFORM_FEEDBACK_BUFFER_INDEX 0x934B
+#define GL_TRANSFORM_FEEDBACK_BUFFER_STRIDE 0x934C
+#define GL_QUERY_BUFFER                   0x9192
+#define GL_QUERY_BUFFER_BARRIER_BIT       0x00008000
+#define GL_QUERY_BUFFER_BINDING           0x9193
+#define GL_QUERY_RESULT_NO_WAIT           0x9194
+#define GL_MIRROR_CLAMP_TO_EDGE           0x8743
+typedef void (APIENTRYP PFNGLBUFFERSTORAGEPROC) (GLenum target, GLsizeiptr size, const void *data, GLbitfield flags);
+typedef void (APIENTRYP PFNGLCLEARTEXIMAGEPROC) (GLuint texture, GLint level, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLCLEARTEXSUBIMAGEPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLBINDBUFFERSBASEPROC) (GLenum target, GLuint first, GLsizei count, const GLuint *buffers);
+typedef void (APIENTRYP PFNGLBINDBUFFERSRANGEPROC) (GLenum target, GLuint first, GLsizei count, const GLuint *buffers, const GLintptr *offsets, const GLsizeiptr *sizes);
+typedef void (APIENTRYP PFNGLBINDTEXTURESPROC) (GLuint first, GLsizei count, const GLuint *textures);
+typedef void (APIENTRYP PFNGLBINDSAMPLERSPROC) (GLuint first, GLsizei count, const GLuint *samplers);
+typedef void (APIENTRYP PFNGLBINDIMAGETEXTURESPROC) (GLuint first, GLsizei count, const GLuint *textures);
+typedef void (APIENTRYP PFNGLBINDVERTEXBUFFERSPROC) (GLuint first, GLsizei count, const GLuint *buffers, const GLintptr *offsets, const GLsizei *strides);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBufferStorage (GLenum target, GLsizeiptr size, const void *data, GLbitfield flags);
+GLAPI void APIENTRY glClearTexImage (GLuint texture, GLint level, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glClearTexSubImage (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glBindBuffersBase (GLenum target, GLuint first, GLsizei count, const GLuint *buffers);
+GLAPI void APIENTRY glBindBuffersRange (GLenum target, GLuint first, GLsizei count, const GLuint *buffers, const GLintptr *offsets, const GLsizeiptr *sizes);
+GLAPI void APIENTRY glBindTextures (GLuint first, GLsizei count, const GLuint *textures);
+GLAPI void APIENTRY glBindSamplers (GLuint first, GLsizei count, const GLuint *samplers);
+GLAPI void APIENTRY glBindImageTextures (GLuint first, GLsizei count, const GLuint *textures);
+GLAPI void APIENTRY glBindVertexBuffers (GLuint first, GLsizei count, const GLuint *buffers, const GLintptr *offsets, const GLsizei *strides);
+#endif
+#endif /* GL_VERSION_4_4 */
+
+#ifndef GL_VERSION_4_5
+#define GL_VERSION_4_5 1
+#define GL_CONTEXT_LOST                   0x0507
+#define GL_NEGATIVE_ONE_TO_ONE            0x935E
+#define GL_ZERO_TO_ONE                    0x935F
+#define GL_CLIP_ORIGIN                    0x935C
+#define GL_CLIP_DEPTH_MODE                0x935D
+#define GL_QUERY_WAIT_INVERTED            0x8E17
+#define GL_QUERY_NO_WAIT_INVERTED         0x8E18
+#define GL_QUERY_BY_REGION_WAIT_INVERTED  0x8E19
+#define GL_QUERY_BY_REGION_NO_WAIT_INVERTED 0x8E1A
+#define GL_MAX_CULL_DISTANCES             0x82F9
+#define GL_MAX_COMBINED_CLIP_AND_CULL_DISTANCES 0x82FA
+#define GL_TEXTURE_TARGET                 0x1006
+#define GL_QUERY_TARGET                   0x82EA
+#define GL_TEXTURE_BINDING                0x82EB
+#define GL_GUILTY_CONTEXT_RESET           0x8253
+#define GL_INNOCENT_CONTEXT_RESET         0x8254
+#define GL_UNKNOWN_CONTEXT_RESET          0x8255
+#define GL_RESET_NOTIFICATION_STRATEGY    0x8256
+#define GL_LOSE_CONTEXT_ON_RESET          0x8252
+#define GL_NO_RESET_NOTIFICATION          0x8261
+#define GL_CONTEXT_FLAG_ROBUST_ACCESS_BIT 0x00000004
+#define GL_CONTEXT_RELEASE_BEHAVIOR       0x82FB
+#define GL_CONTEXT_RELEASE_BEHAVIOR_FLUSH 0x82FC
+typedef void (APIENTRYP PFNGLCLIPCONTROLPROC) (GLenum origin, GLenum depth);
+typedef void (APIENTRYP PFNGLCREATETRANSFORMFEEDBACKSPROC) (GLsizei n, GLuint *ids);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKBUFFERBASEPROC) (GLuint xfb, GLuint index, GLuint buffer);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKBUFFERRANGEPROC) (GLuint xfb, GLuint index, GLuint buffer, GLintptr offset, GLsizei size);
+typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKIVPROC) (GLuint xfb, GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKI_VPROC) (GLuint xfb, GLenum pname, GLuint index, GLint *param);
+typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKI64_VPROC) (GLuint xfb, GLenum pname, GLuint index, GLint64 *param);
+typedef void (APIENTRYP PFNGLCREATEBUFFERSPROC) (GLsizei n, GLuint *buffers);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERSTORAGEPROC) (GLuint buffer, GLsizei size, const void *data, GLbitfield flags);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERDATAPROC) (GLuint buffer, GLsizei size, const void *data, GLenum usage);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERSUBDATAPROC) (GLuint buffer, GLintptr offset, GLsizei size, const void *data);
+typedef void (APIENTRYP PFNGLCOPYNAMEDBUFFERSUBDATAPROC) (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizei size);
+typedef void (APIENTRYP PFNGLCLEARNAMEDBUFFERDATAPROC) (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLCLEARNAMEDBUFFERSUBDATAPROC) (GLuint buffer, GLenum internalformat, GLintptr offset, GLsizei size, GLenum format, GLenum type, const void *data);
+typedef void *(APIENTRYP PFNGLMAPNAMEDBUFFERPROC) (GLuint buffer, GLenum access);
+typedef void *(APIENTRYP PFNGLMAPNAMEDBUFFERRANGEPROC) (GLuint buffer, GLintptr offset, GLsizei length, GLbitfield access);
+typedef GLboolean (APIENTRYP PFNGLUNMAPNAMEDBUFFERPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLFLUSHMAPPEDNAMEDBUFFERRANGEPROC) (GLuint buffer, GLintptr offset, GLsizei length);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERIVPROC) (GLuint buffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERI64VPROC) (GLuint buffer, GLenum pname, GLint64 *params);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPOINTERVPROC) (GLuint buffer, GLenum pname, void **params);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERSUBDATAPROC) (GLuint buffer, GLintptr offset, GLsizei size, void *data);
+typedef void (APIENTRYP PFNGLCREATEFRAMEBUFFERSPROC) (GLsizei n, GLuint *framebuffers);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERRENDERBUFFERPROC) (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERPARAMETERIPROC) (GLuint framebuffer, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURELAYERPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERDRAWBUFFERPROC) (GLuint framebuffer, GLenum buf);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERDRAWBUFFERSPROC) (GLuint framebuffer, GLsizei n, const GLenum *bufs);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERREADBUFFERPROC) (GLuint framebuffer, GLenum src);
+typedef void (APIENTRYP PFNGLINVALIDATENAMEDFRAMEBUFFERDATAPROC) (GLuint framebuffer, GLsizei numAttachments, const GLenum *attachments);
+typedef void (APIENTRYP PFNGLINVALIDATENAMEDFRAMEBUFFERSUBDATAPROC) (GLuint framebuffer, GLsizei numAttachments, const GLenum *attachments, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLCLEARNAMEDFRAMEBUFFERIVPROC) (GLuint framebuffer, GLenum buffer, GLint drawbuffer, const GLint *value);
+typedef void (APIENTRYP PFNGLCLEARNAMEDFRAMEBUFFERUIVPROC) (GLuint framebuffer, GLenum buffer, GLint drawbuffer, const GLuint *value);
+typedef void (APIENTRYP PFNGLCLEARNAMEDFRAMEBUFFERFVPROC) (GLuint framebuffer, GLenum buffer, GLint drawbuffer, const GLfloat *value);
+typedef void (APIENTRYP PFNGLCLEARNAMEDFRAMEBUFFERFIPROC) (GLuint framebuffer, GLenum buffer, const GLfloat depth, GLint stencil);
+typedef void (APIENTRYP PFNGLBLITNAMEDFRAMEBUFFERPROC) (GLuint readFramebuffer, GLuint drawFramebuffer, GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+typedef GLenum (APIENTRYP PFNGLCHECKNAMEDFRAMEBUFFERSTATUSPROC) (GLuint framebuffer, GLenum target);
+typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERPARAMETERIVPROC) (GLuint framebuffer, GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERATTACHMENTPARAMETERIVPROC) (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLCREATERENDERBUFFERSPROC) (GLsizei n, GLuint *renderbuffers);
+typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEPROC) (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLEPROC) (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETNAMEDRENDERBUFFERPARAMETERIVPROC) (GLuint renderbuffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLCREATETEXTURESPROC) (GLenum target, GLsizei n, GLuint *textures);
+typedef void (APIENTRYP PFNGLTEXTUREBUFFERPROC) (GLuint texture, GLenum internalformat, GLuint buffer);
+typedef void (APIENTRYP PFNGLTEXTUREBUFFERRANGEPROC) (GLuint texture, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizei size);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE1DPROC) (GLuint texture, GLsizei levels, GLenum internalformat, GLsizei width);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE2DPROC) (GLuint texture, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE3DPROC) (GLuint texture, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE2DMULTISAMPLEPROC) (GLuint texture, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE3DMULTISAMPLEPROC) (GLuint texture, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE1DPROC) (GLuint texture, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE2DPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE3DPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE1DPROC) (GLuint texture, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE2DPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE3DPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE1DPROC) (GLuint texture, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE2DPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE3DPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFPROC) (GLuint texture, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFVPROC) (GLuint texture, GLenum pname, const GLfloat *param);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIPROC) (GLuint texture, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIIVPROC) (GLuint texture, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIUIVPROC) (GLuint texture, GLenum pname, const GLuint *params);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIVPROC) (GLuint texture, GLenum pname, const GLint *param);
+typedef void (APIENTRYP PFNGLGENERATETEXTUREMIPMAPPROC) (GLuint texture);
+typedef void (APIENTRYP PFNGLBINDTEXTUREUNITPROC) (GLuint unit, GLuint texture);
+typedef void (APIENTRYP PFNGLGETTEXTUREIMAGEPROC) (GLuint texture, GLint level, GLenum format, GLenum type, GLsizei bufSize, void *pixels);
+typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXTUREIMAGEPROC) (GLuint texture, GLint level, GLsizei bufSize, void *pixels);
+typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERFVPROC) (GLuint texture, GLint level, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERIVPROC) (GLuint texture, GLint level, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERFVPROC) (GLuint texture, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIIVPROC) (GLuint texture, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIUIVPROC) (GLuint texture, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIVPROC) (GLuint texture, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLCREATEVERTEXARRAYSPROC) (GLsizei n, GLuint *arrays);
+typedef void (APIENTRYP PFNGLDISABLEVERTEXARRAYATTRIBPROC) (GLuint vaobj, GLuint index);
+typedef void (APIENTRYP PFNGLENABLEVERTEXARRAYATTRIBPROC) (GLuint vaobj, GLuint index);
+typedef void (APIENTRYP PFNGLVERTEXARRAYELEMENTBUFFERPROC) (GLuint vaobj, GLuint buffer);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXBUFFERPROC) (GLuint vaobj, GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXBUFFERSPROC) (GLuint vaobj, GLuint first, GLsizei count, const GLuint *buffers, const GLintptr *offsets, const GLsizei *strides);
+typedef void (APIENTRYP PFNGLVERTEXARRAYATTRIBBINDINGPROC) (GLuint vaobj, GLuint attribindex, GLuint bindingindex);
+typedef void (APIENTRYP PFNGLVERTEXARRAYATTRIBFORMATPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYATTRIBIFORMATPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYATTRIBLFORMATPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYBINDINGDIVISORPROC) (GLuint vaobj, GLuint bindingindex, GLuint divisor);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYIVPROC) (GLuint vaobj, GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYINDEXEDIVPROC) (GLuint vaobj, GLuint index, GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYINDEXED64IVPROC) (GLuint vaobj, GLuint index, GLenum pname, GLint64 *param);
+typedef void (APIENTRYP PFNGLCREATESAMPLERSPROC) (GLsizei n, GLuint *samplers);
+typedef void (APIENTRYP PFNGLCREATEPROGRAMPIPELINESPROC) (GLsizei n, GLuint *pipelines);
+typedef void (APIENTRYP PFNGLCREATEQUERIESPROC) (GLenum target, GLsizei n, GLuint *ids);
+typedef void (APIENTRYP PFNGLMEMORYBARRIERBYREGIONPROC) (GLbitfield barriers);
+typedef void (APIENTRYP PFNGLGETTEXTURESUBIMAGEPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, GLsizei bufSize, void *pixels);
+typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXTURESUBIMAGEPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei bufSize, void *pixels);
+typedef GLenum (APIENTRYP PFNGLGETGRAPHICSRESETSTATUSPROC) (void);
+typedef void (APIENTRYP PFNGLGETNCOMPRESSEDTEXIMAGEPROC) (GLenum target, GLint lod, GLsizei bufSize, void *pixels);
+typedef void (APIENTRYP PFNGLGETNTEXIMAGEPROC) (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, void *pixels);
+typedef void (APIENTRYP PFNGLGETNUNIFORMDVPROC) (GLuint program, GLint location, GLsizei bufSize, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETNUNIFORMFVPROC) (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETNUNIFORMIVPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params);
+typedef void (APIENTRYP PFNGLGETNUNIFORMUIVPROC) (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
+typedef void (APIENTRYP PFNGLREADNPIXELSPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+typedef void (APIENTRYP PFNGLGETNMAPDVPROC) (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v);
+typedef void (APIENTRYP PFNGLGETNMAPFVPROC) (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v);
+typedef void (APIENTRYP PFNGLGETNMAPIVPROC) (GLenum target, GLenum query, GLsizei bufSize, GLint *v);
+typedef void (APIENTRYP PFNGLGETNPIXELMAPFVPROC) (GLenum map, GLsizei bufSize, GLfloat *values);
+typedef void (APIENTRYP PFNGLGETNPIXELMAPUIVPROC) (GLenum map, GLsizei bufSize, GLuint *values);
+typedef void (APIENTRYP PFNGLGETNPIXELMAPUSVPROC) (GLenum map, GLsizei bufSize, GLushort *values);
+typedef void (APIENTRYP PFNGLGETNPOLYGONSTIPPLEPROC) (GLsizei bufSize, GLubyte *pattern);
+typedef void (APIENTRYP PFNGLGETNCOLORTABLEPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *table);
+typedef void (APIENTRYP PFNGLGETNCONVOLUTIONFILTERPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *image);
+typedef void (APIENTRYP PFNGLGETNSEPARABLEFILTERPROC) (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, void *row, GLsizei columnBufSize, void *column, void *span);
+typedef void (APIENTRYP PFNGLGETNHISTOGRAMPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+typedef void (APIENTRYP PFNGLGETNMINMAXPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+typedef void (APIENTRYP PFNGLTEXTUREBARRIERPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glClipControl (GLenum origin, GLenum depth);
+GLAPI void APIENTRY glCreateTransformFeedbacks (GLsizei n, GLuint *ids);
+GLAPI void APIENTRY glTransformFeedbackBufferBase (GLuint xfb, GLuint index, GLuint buffer);
+GLAPI void APIENTRY glTransformFeedbackBufferRange (GLuint xfb, GLuint index, GLuint buffer, GLintptr offset, GLsizei size);
+GLAPI void APIENTRY glGetTransformFeedbackiv (GLuint xfb, GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetTransformFeedbacki_v (GLuint xfb, GLenum pname, GLuint index, GLint *param);
+GLAPI void APIENTRY glGetTransformFeedbacki64_v (GLuint xfb, GLenum pname, GLuint index, GLint64 *param);
+GLAPI void APIENTRY glCreateBuffers (GLsizei n, GLuint *buffers);
+GLAPI void APIENTRY glNamedBufferStorage (GLuint buffer, GLsizei size, const void *data, GLbitfield flags);
+GLAPI void APIENTRY glNamedBufferData (GLuint buffer, GLsizei size, const void *data, GLenum usage);
+GLAPI void APIENTRY glNamedBufferSubData (GLuint buffer, GLintptr offset, GLsizei size, const void *data);
+GLAPI void APIENTRY glCopyNamedBufferSubData (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizei size);
+GLAPI void APIENTRY glClearNamedBufferData (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glClearNamedBufferSubData (GLuint buffer, GLenum internalformat, GLintptr offset, GLsizei size, GLenum format, GLenum type, const void *data);
+GLAPI void *APIENTRY glMapNamedBuffer (GLuint buffer, GLenum access);
+GLAPI void *APIENTRY glMapNamedBufferRange (GLuint buffer, GLintptr offset, GLsizei length, GLbitfield access);
+GLAPI GLboolean APIENTRY glUnmapNamedBuffer (GLuint buffer);
+GLAPI void APIENTRY glFlushMappedNamedBufferRange (GLuint buffer, GLintptr offset, GLsizei length);
+GLAPI void APIENTRY glGetNamedBufferParameteriv (GLuint buffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetNamedBufferParameteri64v (GLuint buffer, GLenum pname, GLint64 *params);
+GLAPI void APIENTRY glGetNamedBufferPointerv (GLuint buffer, GLenum pname, void **params);
+GLAPI void APIENTRY glGetNamedBufferSubData (GLuint buffer, GLintptr offset, GLsizei size, void *data);
+GLAPI void APIENTRY glCreateFramebuffers (GLsizei n, GLuint *framebuffers);
+GLAPI void APIENTRY glNamedFramebufferRenderbuffer (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+GLAPI void APIENTRY glNamedFramebufferParameteri (GLuint framebuffer, GLenum pname, GLint param);
+GLAPI void APIENTRY glNamedFramebufferTexture (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level);
+GLAPI void APIENTRY glNamedFramebufferTextureLayer (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer);
+GLAPI void APIENTRY glNamedFramebufferDrawBuffer (GLuint framebuffer, GLenum buf);
+GLAPI void APIENTRY glNamedFramebufferDrawBuffers (GLuint framebuffer, GLsizei n, const GLenum *bufs);
+GLAPI void APIENTRY glNamedFramebufferReadBuffer (GLuint framebuffer, GLenum src);
+GLAPI void APIENTRY glInvalidateNamedFramebufferData (GLuint framebuffer, GLsizei numAttachments, const GLenum *attachments);
+GLAPI void APIENTRY glInvalidateNamedFramebufferSubData (GLuint framebuffer, GLsizei numAttachments, const GLenum *attachments, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glClearNamedFramebufferiv (GLuint framebuffer, GLenum buffer, GLint drawbuffer, const GLint *value);
+GLAPI void APIENTRY glClearNamedFramebufferuiv (GLuint framebuffer, GLenum buffer, GLint drawbuffer, const GLuint *value);
+GLAPI void APIENTRY glClearNamedFramebufferfv (GLuint framebuffer, GLenum buffer, GLint drawbuffer, const GLfloat *value);
+GLAPI void APIENTRY glClearNamedFramebufferfi (GLuint framebuffer, GLenum buffer, const GLfloat depth, GLint stencil);
+GLAPI void APIENTRY glBlitNamedFramebuffer (GLuint readFramebuffer, GLuint drawFramebuffer, GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+GLAPI GLenum APIENTRY glCheckNamedFramebufferStatus (GLuint framebuffer, GLenum target);
+GLAPI void APIENTRY glGetNamedFramebufferParameteriv (GLuint framebuffer, GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetNamedFramebufferAttachmentParameteriv (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params);
+GLAPI void APIENTRY glCreateRenderbuffers (GLsizei n, GLuint *renderbuffers);
+GLAPI void APIENTRY glNamedRenderbufferStorage (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glNamedRenderbufferStorageMultisample (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetNamedRenderbufferParameteriv (GLuint renderbuffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glCreateTextures (GLenum target, GLsizei n, GLuint *textures);
+GLAPI void APIENTRY glTextureBuffer (GLuint texture, GLenum internalformat, GLuint buffer);
+GLAPI void APIENTRY glTextureBufferRange (GLuint texture, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizei size);
+GLAPI void APIENTRY glTextureStorage1D (GLuint texture, GLsizei levels, GLenum internalformat, GLsizei width);
+GLAPI void APIENTRY glTextureStorage2D (GLuint texture, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glTextureStorage3D (GLuint texture, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+GLAPI void APIENTRY glTextureStorage2DMultisample (GLuint texture, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glTextureStorage3DMultisample (GLuint texture, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glTextureSubImage1D (GLuint texture, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTextureSubImage2D (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTextureSubImage3D (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glCompressedTextureSubImage1D (GLuint texture, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTextureSubImage2D (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTextureSubImage3D (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCopyTextureSubImage1D (GLuint texture, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glCopyTextureSubImage2D (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glCopyTextureSubImage3D (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glTextureParameterf (GLuint texture, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glTextureParameterfv (GLuint texture, GLenum pname, const GLfloat *param);
+GLAPI void APIENTRY glTextureParameteri (GLuint texture, GLenum pname, GLint param);
+GLAPI void APIENTRY glTextureParameterIiv (GLuint texture, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glTextureParameterIuiv (GLuint texture, GLenum pname, const GLuint *params);
+GLAPI void APIENTRY glTextureParameteriv (GLuint texture, GLenum pname, const GLint *param);
+GLAPI void APIENTRY glGenerateTextureMipmap (GLuint texture);
+GLAPI void APIENTRY glBindTextureUnit (GLuint unit, GLuint texture);
+GLAPI void APIENTRY glGetTextureImage (GLuint texture, GLint level, GLenum format, GLenum type, GLsizei bufSize, void *pixels);
+GLAPI void APIENTRY glGetCompressedTextureImage (GLuint texture, GLint level, GLsizei bufSize, void *pixels);
+GLAPI void APIENTRY glGetTextureLevelParameterfv (GLuint texture, GLint level, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetTextureLevelParameteriv (GLuint texture, GLint level, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetTextureParameterfv (GLuint texture, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetTextureParameterIiv (GLuint texture, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetTextureParameterIuiv (GLuint texture, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glGetTextureParameteriv (GLuint texture, GLenum pname, GLint *params);
+GLAPI void APIENTRY glCreateVertexArrays (GLsizei n, GLuint *arrays);
+GLAPI void APIENTRY glDisableVertexArrayAttrib (GLuint vaobj, GLuint index);
+GLAPI void APIENTRY glEnableVertexArrayAttrib (GLuint vaobj, GLuint index);
+GLAPI void APIENTRY glVertexArrayElementBuffer (GLuint vaobj, GLuint buffer);
+GLAPI void APIENTRY glVertexArrayVertexBuffer (GLuint vaobj, GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
+GLAPI void APIENTRY glVertexArrayVertexBuffers (GLuint vaobj, GLuint first, GLsizei count, const GLuint *buffers, const GLintptr *offsets, const GLsizei *strides);
+GLAPI void APIENTRY glVertexArrayAttribBinding (GLuint vaobj, GLuint attribindex, GLuint bindingindex);
+GLAPI void APIENTRY glVertexArrayAttribFormat (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexArrayAttribIFormat (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexArrayAttribLFormat (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexArrayBindingDivisor (GLuint vaobj, GLuint bindingindex, GLuint divisor);
+GLAPI void APIENTRY glGetVertexArrayiv (GLuint vaobj, GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetVertexArrayIndexediv (GLuint vaobj, GLuint index, GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetVertexArrayIndexed64iv (GLuint vaobj, GLuint index, GLenum pname, GLint64 *param);
+GLAPI void APIENTRY glCreateSamplers (GLsizei n, GLuint *samplers);
+GLAPI void APIENTRY glCreateProgramPipelines (GLsizei n, GLuint *pipelines);
+GLAPI void APIENTRY glCreateQueries (GLenum target, GLsizei n, GLuint *ids);
+GLAPI void APIENTRY glMemoryBarrierByRegion (GLbitfield barriers);
+GLAPI void APIENTRY glGetTextureSubImage (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, GLsizei bufSize, void *pixels);
+GLAPI void APIENTRY glGetCompressedTextureSubImage (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei bufSize, void *pixels);
+GLAPI GLenum APIENTRY glGetGraphicsResetStatus (void);
+GLAPI void APIENTRY glGetnCompressedTexImage (GLenum target, GLint lod, GLsizei bufSize, void *pixels);
+GLAPI void APIENTRY glGetnTexImage (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, void *pixels);
+GLAPI void APIENTRY glGetnUniformdv (GLuint program, GLint location, GLsizei bufSize, GLdouble *params);
+GLAPI void APIENTRY glGetnUniformfv (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+GLAPI void APIENTRY glGetnUniformiv (GLuint program, GLint location, GLsizei bufSize, GLint *params);
+GLAPI void APIENTRY glGetnUniformuiv (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
+GLAPI void APIENTRY glReadnPixels (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+GLAPI void APIENTRY glGetnMapdv (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v);
+GLAPI void APIENTRY glGetnMapfv (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v);
+GLAPI void APIENTRY glGetnMapiv (GLenum target, GLenum query, GLsizei bufSize, GLint *v);
+GLAPI void APIENTRY glGetnPixelMapfv (GLenum map, GLsizei bufSize, GLfloat *values);
+GLAPI void APIENTRY glGetnPixelMapuiv (GLenum map, GLsizei bufSize, GLuint *values);
+GLAPI void APIENTRY glGetnPixelMapusv (GLenum map, GLsizei bufSize, GLushort *values);
+GLAPI void APIENTRY glGetnPolygonStipple (GLsizei bufSize, GLubyte *pattern);
+GLAPI void APIENTRY glGetnColorTable (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *table);
+GLAPI void APIENTRY glGetnConvolutionFilter (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *image);
+GLAPI void APIENTRY glGetnSeparableFilter (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, void *row, GLsizei columnBufSize, void *column, void *span);
+GLAPI void APIENTRY glGetnHistogram (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+GLAPI void APIENTRY glGetnMinmax (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+GLAPI void APIENTRY glTextureBarrier (void);
+#endif
+#endif /* GL_VERSION_4_5 */
 
-#ifndef GL_ARB_texture_query_levels
-#endif
+#ifndef GL_ARB_ES2_compatibility
+#define GL_ARB_ES2_compatibility 1
+#endif /* GL_ARB_ES2_compatibility */
 
-#ifndef GL_ARB_texture_storage_multisample
-#endif
+#ifndef GL_ARB_ES3_1_compatibility
+#define GL_ARB_ES3_1_compatibility 1
+#endif /* GL_ARB_ES3_1_compatibility */
 
-#ifndef GL_EXT_abgr
-#define GL_ABGR_EXT                       0x8000
-#endif
+#ifndef GL_ARB_ES3_compatibility
+#define GL_ARB_ES3_compatibility 1
+#endif /* GL_ARB_ES3_compatibility */
 
-#ifndef GL_EXT_blend_color
-#define GL_CONSTANT_COLOR_EXT             0x8001
-#define GL_ONE_MINUS_CONSTANT_COLOR_EXT   0x8002
-#define GL_CONSTANT_ALPHA_EXT             0x8003
-#define GL_ONE_MINUS_CONSTANT_ALPHA_EXT   0x8004
-#define GL_BLEND_COLOR_EXT                0x8005
-#endif
+#ifndef GL_ARB_arrays_of_arrays
+#define GL_ARB_arrays_of_arrays 1
+#endif /* GL_ARB_arrays_of_arrays */
 
-#ifndef GL_EXT_polygon_offset
-#define GL_POLYGON_OFFSET_EXT             0x8037
-#define GL_POLYGON_OFFSET_FACTOR_EXT      0x8038
-#define GL_POLYGON_OFFSET_BIAS_EXT        0x8039
-#endif
+#ifndef GL_ARB_base_instance
+#define GL_ARB_base_instance 1
+#endif /* GL_ARB_base_instance */
 
-#ifndef GL_EXT_texture
-#define GL_ALPHA4_EXT                     0x803B
-#define GL_ALPHA8_EXT                     0x803C
-#define GL_ALPHA12_EXT                    0x803D
-#define GL_ALPHA16_EXT                    0x803E
-#define GL_LUMINANCE4_EXT                 0x803F
-#define GL_LUMINANCE8_EXT                 0x8040
-#define GL_LUMINANCE12_EXT                0x8041
-#define GL_LUMINANCE16_EXT                0x8042
-#define GL_LUMINANCE4_ALPHA4_EXT          0x8043
-#define GL_LUMINANCE6_ALPHA2_EXT          0x8044
-#define GL_LUMINANCE8_ALPHA8_EXT          0x8045
-#define GL_LUMINANCE12_ALPHA4_EXT         0x8046
-#define GL_LUMINANCE12_ALPHA12_EXT        0x8047
-#define GL_LUMINANCE16_ALPHA16_EXT        0x8048
-#define GL_INTENSITY_EXT                  0x8049
-#define GL_INTENSITY4_EXT                 0x804A
-#define GL_INTENSITY8_EXT                 0x804B
-#define GL_INTENSITY12_EXT                0x804C
-#define GL_INTENSITY16_EXT                0x804D
-#define GL_RGB2_EXT                       0x804E
-#define GL_RGB4_EXT                       0x804F
-#define GL_RGB5_EXT                       0x8050
-#define GL_RGB8_EXT                       0x8051
-#define GL_RGB10_EXT                      0x8052
-#define GL_RGB12_EXT                      0x8053
-#define GL_RGB16_EXT                      0x8054
-#define GL_RGBA2_EXT                      0x8055
-#define GL_RGBA4_EXT                      0x8056
-#define GL_RGB5_A1_EXT                    0x8057
-#define GL_RGBA8_EXT                      0x8058
-#define GL_RGB10_A2_EXT                   0x8059
-#define GL_RGBA12_EXT                     0x805A
-#define GL_RGBA16_EXT                     0x805B
-#define GL_TEXTURE_RED_SIZE_EXT           0x805C
-#define GL_TEXTURE_GREEN_SIZE_EXT         0x805D
-#define GL_TEXTURE_BLUE_SIZE_EXT          0x805E
-#define GL_TEXTURE_ALPHA_SIZE_EXT         0x805F
-#define GL_TEXTURE_LUMINANCE_SIZE_EXT     0x8060
-#define GL_TEXTURE_INTENSITY_SIZE_EXT     0x8061
-#define GL_REPLACE_EXT                    0x8062
-#define GL_PROXY_TEXTURE_1D_EXT           0x8063
-#define GL_PROXY_TEXTURE_2D_EXT           0x8064
-#define GL_TEXTURE_TOO_LARGE_EXT          0x8065
-#endif
+#ifndef GL_ARB_bindless_texture
+#define GL_ARB_bindless_texture 1
+typedef uint64_t GLuint64EXT;
+#define GL_UNSIGNED_INT64_ARB             0x140F
+typedef GLuint64 (APIENTRYP PFNGLGETTEXTUREHANDLEARBPROC) (GLuint texture);
+typedef GLuint64 (APIENTRYP PFNGLGETTEXTURESAMPLERHANDLEARBPROC) (GLuint texture, GLuint sampler);
+typedef void (APIENTRYP PFNGLMAKETEXTUREHANDLERESIDENTARBPROC) (GLuint64 handle);
+typedef void (APIENTRYP PFNGLMAKETEXTUREHANDLENONRESIDENTARBPROC) (GLuint64 handle);
+typedef GLuint64 (APIENTRYP PFNGLGETIMAGEHANDLEARBPROC) (GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum format);
+typedef void (APIENTRYP PFNGLMAKEIMAGEHANDLERESIDENTARBPROC) (GLuint64 handle, GLenum access);
+typedef void (APIENTRYP PFNGLMAKEIMAGEHANDLENONRESIDENTARBPROC) (GLuint64 handle);
+typedef void (APIENTRYP PFNGLUNIFORMHANDLEUI64ARBPROC) (GLint location, GLuint64 value);
+typedef void (APIENTRYP PFNGLUNIFORMHANDLEUI64VARBPROC) (GLint location, GLsizei count, const GLuint64 *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMHANDLEUI64ARBPROC) (GLuint program, GLint location, GLuint64 value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMHANDLEUI64VARBPROC) (GLuint program, GLint location, GLsizei count, const GLuint64 *values);
+typedef GLboolean (APIENTRYP PFNGLISTEXTUREHANDLERESIDENTARBPROC) (GLuint64 handle);
+typedef GLboolean (APIENTRYP PFNGLISIMAGEHANDLERESIDENTARBPROC) (GLuint64 handle);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64ARBPROC) (GLuint index, GLuint64EXT x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64VARBPROC) (GLuint index, const GLuint64EXT *v);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLUI64VARBPROC) (GLuint index, GLenum pname, GLuint64EXT *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLuint64 APIENTRY glGetTextureHandleARB (GLuint texture);
+GLAPI GLuint64 APIENTRY glGetTextureSamplerHandleARB (GLuint texture, GLuint sampler);
+GLAPI void APIENTRY glMakeTextureHandleResidentARB (GLuint64 handle);
+GLAPI void APIENTRY glMakeTextureHandleNonResidentARB (GLuint64 handle);
+GLAPI GLuint64 APIENTRY glGetImageHandleARB (GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum format);
+GLAPI void APIENTRY glMakeImageHandleResidentARB (GLuint64 handle, GLenum access);
+GLAPI void APIENTRY glMakeImageHandleNonResidentARB (GLuint64 handle);
+GLAPI void APIENTRY glUniformHandleui64ARB (GLint location, GLuint64 value);
+GLAPI void APIENTRY glUniformHandleui64vARB (GLint location, GLsizei count, const GLuint64 *value);
+GLAPI void APIENTRY glProgramUniformHandleui64ARB (GLuint program, GLint location, GLuint64 value);
+GLAPI void APIENTRY glProgramUniformHandleui64vARB (GLuint program, GLint location, GLsizei count, const GLuint64 *values);
+GLAPI GLboolean APIENTRY glIsTextureHandleResidentARB (GLuint64 handle);
+GLAPI GLboolean APIENTRY glIsImageHandleResidentARB (GLuint64 handle);
+GLAPI void APIENTRY glVertexAttribL1ui64ARB (GLuint index, GLuint64EXT x);
+GLAPI void APIENTRY glVertexAttribL1ui64vARB (GLuint index, const GLuint64EXT *v);
+GLAPI void APIENTRY glGetVertexAttribLui64vARB (GLuint index, GLenum pname, GLuint64EXT *params);
+#endif
+#endif /* GL_ARB_bindless_texture */
 
-#ifndef GL_EXT_texture3D
-#define GL_PACK_SKIP_IMAGES_EXT           0x806B
-#define GL_PACK_IMAGE_HEIGHT_EXT          0x806C
-#define GL_UNPACK_SKIP_IMAGES_EXT         0x806D
-#define GL_UNPACK_IMAGE_HEIGHT_EXT        0x806E
-#define GL_TEXTURE_3D_EXT                 0x806F
-#define GL_PROXY_TEXTURE_3D_EXT           0x8070
-#define GL_TEXTURE_DEPTH_EXT              0x8071
-#define GL_TEXTURE_WRAP_R_EXT             0x8072
-#define GL_MAX_3D_TEXTURE_SIZE_EXT        0x8073
-#endif
+#ifndef GL_ARB_blend_func_extended
+#define GL_ARB_blend_func_extended 1
+#endif /* GL_ARB_blend_func_extended */
 
-#ifndef GL_SGIS_texture_filter4
-#define GL_FILTER4_SGIS                   0x8146
-#define GL_TEXTURE_FILTER4_SIZE_SGIS      0x8147
-#endif
+#ifndef GL_ARB_buffer_storage
+#define GL_ARB_buffer_storage 1
+#endif /* GL_ARB_buffer_storage */
 
-#ifndef GL_EXT_subtexture
+#ifndef GL_ARB_cl_event
+#define GL_ARB_cl_event 1
+struct _cl_context;
+struct _cl_event;
+#define GL_SYNC_CL_EVENT_ARB              0x8240
+#define GL_SYNC_CL_EVENT_COMPLETE_ARB     0x8241
+typedef GLsync (APIENTRYP PFNGLCREATESYNCFROMCLEVENTARBPROC) (struct _cl_context *context, struct _cl_event *event, GLbitfield flags);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLsync APIENTRY glCreateSyncFromCLeventARB (struct _cl_context *context, struct _cl_event *event, GLbitfield flags);
 #endif
+#endif /* GL_ARB_cl_event */
 
-#ifndef GL_EXT_copy_texture
-#endif
+#ifndef GL_ARB_clear_buffer_object
+#define GL_ARB_clear_buffer_object 1
+#endif /* GL_ARB_clear_buffer_object */
 
-#ifndef GL_EXT_histogram
-#define GL_HISTOGRAM_EXT                  0x8024
-#define GL_PROXY_HISTOGRAM_EXT            0x8025
-#define GL_HISTOGRAM_WIDTH_EXT            0x8026
-#define GL_HISTOGRAM_FORMAT_EXT           0x8027
-#define GL_HISTOGRAM_RED_SIZE_EXT         0x8028
-#define GL_HISTOGRAM_GREEN_SIZE_EXT       0x8029
-#define GL_HISTOGRAM_BLUE_SIZE_EXT        0x802A
-#define GL_HISTOGRAM_ALPHA_SIZE_EXT       0x802B
-#define GL_HISTOGRAM_LUMINANCE_SIZE_EXT   0x802C
-#define GL_HISTOGRAM_SINK_EXT             0x802D
-#define GL_MINMAX_EXT                     0x802E
-#define GL_MINMAX_FORMAT_EXT              0x802F
-#define GL_MINMAX_SINK_EXT                0x8030
-#define GL_TABLE_TOO_LARGE_EXT            0x8031
-#endif
+#ifndef GL_ARB_clear_texture
+#define GL_ARB_clear_texture 1
+#endif /* GL_ARB_clear_texture */
 
-#ifndef GL_EXT_convolution
-#define GL_CONVOLUTION_1D_EXT             0x8010
-#define GL_CONVOLUTION_2D_EXT             0x8011
-#define GL_SEPARABLE_2D_EXT               0x8012
-#define GL_CONVOLUTION_BORDER_MODE_EXT    0x8013
-#define GL_CONVOLUTION_FILTER_SCALE_EXT   0x8014
-#define GL_CONVOLUTION_FILTER_BIAS_EXT    0x8015
-#define GL_REDUCE_EXT                     0x8016
-#define GL_CONVOLUTION_FORMAT_EXT         0x8017
-#define GL_CONVOLUTION_WIDTH_EXT          0x8018
-#define GL_CONVOLUTION_HEIGHT_EXT         0x8019
-#define GL_MAX_CONVOLUTION_WIDTH_EXT      0x801A
-#define GL_MAX_CONVOLUTION_HEIGHT_EXT     0x801B
-#define GL_POST_CONVOLUTION_RED_SCALE_EXT 0x801C
-#define GL_POST_CONVOLUTION_GREEN_SCALE_EXT 0x801D
-#define GL_POST_CONVOLUTION_BLUE_SCALE_EXT 0x801E
-#define GL_POST_CONVOLUTION_ALPHA_SCALE_EXT 0x801F
-#define GL_POST_CONVOLUTION_RED_BIAS_EXT  0x8020
-#define GL_POST_CONVOLUTION_GREEN_BIAS_EXT 0x8021
-#define GL_POST_CONVOLUTION_BLUE_BIAS_EXT 0x8022
-#define GL_POST_CONVOLUTION_ALPHA_BIAS_EXT 0x8023
-#endif
+#ifndef GL_ARB_clip_control
+#define GL_ARB_clip_control 1
+#endif /* GL_ARB_clip_control */
 
-#ifndef GL_SGI_color_matrix
-#define GL_COLOR_MATRIX_SGI               0x80B1
-#define GL_COLOR_MATRIX_STACK_DEPTH_SGI   0x80B2
-#define GL_MAX_COLOR_MATRIX_STACK_DEPTH_SGI 0x80B3
-#define GL_POST_COLOR_MATRIX_RED_SCALE_SGI 0x80B4
-#define GL_POST_COLOR_MATRIX_GREEN_SCALE_SGI 0x80B5
-#define GL_POST_COLOR_MATRIX_BLUE_SCALE_SGI 0x80B6
-#define GL_POST_COLOR_MATRIX_ALPHA_SCALE_SGI 0x80B7
-#define GL_POST_COLOR_MATRIX_RED_BIAS_SGI 0x80B8
-#define GL_POST_COLOR_MATRIX_GREEN_BIAS_SGI 0x80B9
-#define GL_POST_COLOR_MATRIX_BLUE_BIAS_SGI 0x80BA
-#define GL_POST_COLOR_MATRIX_ALPHA_BIAS_SGI 0x80BB
+#ifndef GL_ARB_color_buffer_float
+#define GL_ARB_color_buffer_float 1
+#define GL_RGBA_FLOAT_MODE_ARB            0x8820
+#define GL_CLAMP_VERTEX_COLOR_ARB         0x891A
+#define GL_CLAMP_FRAGMENT_COLOR_ARB       0x891B
+#define GL_CLAMP_READ_COLOR_ARB           0x891C
+#define GL_FIXED_ONLY_ARB                 0x891D
+typedef void (APIENTRYP PFNGLCLAMPCOLORARBPROC) (GLenum target, GLenum clamp);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glClampColorARB (GLenum target, GLenum clamp);
 #endif
+#endif /* GL_ARB_color_buffer_float */
 
-#ifndef GL_SGI_color_table
-#define GL_COLOR_TABLE_SGI                0x80D0
-#define GL_POST_CONVOLUTION_COLOR_TABLE_SGI 0x80D1
-#define GL_POST_COLOR_MATRIX_COLOR_TABLE_SGI 0x80D2
-#define GL_PROXY_COLOR_TABLE_SGI          0x80D3
-#define GL_PROXY_POST_CONVOLUTION_COLOR_TABLE_SGI 0x80D4
-#define GL_PROXY_POST_COLOR_MATRIX_COLOR_TABLE_SGI 0x80D5
-#define GL_COLOR_TABLE_SCALE_SGI          0x80D6
-#define GL_COLOR_TABLE_BIAS_SGI           0x80D7
-#define GL_COLOR_TABLE_FORMAT_SGI         0x80D8
-#define GL_COLOR_TABLE_WIDTH_SGI          0x80D9
-#define GL_COLOR_TABLE_RED_SIZE_SGI       0x80DA
-#define GL_COLOR_TABLE_GREEN_SIZE_SGI     0x80DB
-#define GL_COLOR_TABLE_BLUE_SIZE_SGI      0x80DC
-#define GL_COLOR_TABLE_ALPHA_SIZE_SGI     0x80DD
-#define GL_COLOR_TABLE_LUMINANCE_SIZE_SGI 0x80DE
-#define GL_COLOR_TABLE_INTENSITY_SIZE_SGI 0x80DF
-#endif
+#ifndef GL_ARB_compatibility
+#define GL_ARB_compatibility 1
+#endif /* GL_ARB_compatibility */
 
-#ifndef GL_SGIS_pixel_texture
-#define GL_PIXEL_TEXTURE_SGIS             0x8353
-#define GL_PIXEL_FRAGMENT_RGB_SOURCE_SGIS 0x8354
-#define GL_PIXEL_FRAGMENT_ALPHA_SOURCE_SGIS 0x8355
-#define GL_PIXEL_GROUP_COLOR_SGIS         0x8356
-#endif
+#ifndef GL_ARB_compressed_texture_pixel_storage
+#define GL_ARB_compressed_texture_pixel_storage 1
+#endif /* GL_ARB_compressed_texture_pixel_storage */
 
-#ifndef GL_SGIX_pixel_texture
-#define GL_PIXEL_TEX_GEN_SGIX             0x8139
-#define GL_PIXEL_TEX_GEN_MODE_SGIX        0x832B
-#endif
+#ifndef GL_ARB_compute_shader
+#define GL_ARB_compute_shader 1
+#endif /* GL_ARB_compute_shader */
 
-#ifndef GL_SGIS_texture4D
-#define GL_PACK_SKIP_VOLUMES_SGIS         0x8130
-#define GL_PACK_IMAGE_DEPTH_SGIS          0x8131
-#define GL_UNPACK_SKIP_VOLUMES_SGIS       0x8132
-#define GL_UNPACK_IMAGE_DEPTH_SGIS        0x8133
-#define GL_TEXTURE_4D_SGIS                0x8134
-#define GL_PROXY_TEXTURE_4D_SGIS          0x8135
-#define GL_TEXTURE_4DSIZE_SGIS            0x8136
-#define GL_TEXTURE_WRAP_Q_SGIS            0x8137
-#define GL_MAX_4D_TEXTURE_SIZE_SGIS       0x8138
-#define GL_TEXTURE_4D_BINDING_SGIS        0x814F
+#ifndef GL_ARB_compute_variable_group_size
+#define GL_ARB_compute_variable_group_size 1
+#define GL_MAX_COMPUTE_VARIABLE_GROUP_INVOCATIONS_ARB 0x9344
+#define GL_MAX_COMPUTE_FIXED_GROUP_INVOCATIONS_ARB 0x90EB
+#define GL_MAX_COMPUTE_VARIABLE_GROUP_SIZE_ARB 0x9345
+#define GL_MAX_COMPUTE_FIXED_GROUP_SIZE_ARB 0x91BF
+typedef void (APIENTRYP PFNGLDISPATCHCOMPUTEGROUPSIZEARBPROC) (GLuint num_groups_x, GLuint num_groups_y, GLuint num_groups_z, GLuint group_size_x, GLuint group_size_y, GLuint group_size_z);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDispatchComputeGroupSizeARB (GLuint num_groups_x, GLuint num_groups_y, GLuint num_groups_z, GLuint group_size_x, GLuint group_size_y, GLuint group_size_z);
 #endif
+#endif /* GL_ARB_compute_variable_group_size */
 
-#ifndef GL_SGI_texture_color_table
-#define GL_TEXTURE_COLOR_TABLE_SGI        0x80BC
-#define GL_PROXY_TEXTURE_COLOR_TABLE_SGI  0x80BD
-#endif
+#ifndef GL_ARB_conditional_render_inverted
+#define GL_ARB_conditional_render_inverted 1
+#endif /* GL_ARB_conditional_render_inverted */
 
-#ifndef GL_EXT_cmyka
-#define GL_CMYK_EXT                       0x800C
-#define GL_CMYKA_EXT                      0x800D
-#define GL_PACK_CMYK_HINT_EXT             0x800E
-#define GL_UNPACK_CMYK_HINT_EXT           0x800F
-#endif
+#ifndef GL_ARB_conservative_depth
+#define GL_ARB_conservative_depth 1
+#endif /* GL_ARB_conservative_depth */
 
-#ifndef GL_EXT_texture_object
-#define GL_TEXTURE_PRIORITY_EXT           0x8066
-#define GL_TEXTURE_RESIDENT_EXT           0x8067
-#define GL_TEXTURE_1D_BINDING_EXT         0x8068
-#define GL_TEXTURE_2D_BINDING_EXT         0x8069
-#define GL_TEXTURE_3D_BINDING_EXT         0x806A
-#endif
+#ifndef GL_ARB_copy_buffer
+#define GL_ARB_copy_buffer 1
+#define GL_COPY_READ_BUFFER_BINDING       0x8F36
+#define GL_COPY_WRITE_BUFFER_BINDING      0x8F37
+#endif /* GL_ARB_copy_buffer */
 
-#ifndef GL_SGIS_detail_texture
-#define GL_DETAIL_TEXTURE_2D_SGIS         0x8095
-#define GL_DETAIL_TEXTURE_2D_BINDING_SGIS 0x8096
-#define GL_LINEAR_DETAIL_SGIS             0x8097
-#define GL_LINEAR_DETAIL_ALPHA_SGIS       0x8098
-#define GL_LINEAR_DETAIL_COLOR_SGIS       0x8099
-#define GL_DETAIL_TEXTURE_LEVEL_SGIS      0x809A
-#define GL_DETAIL_TEXTURE_MODE_SGIS       0x809B
-#define GL_DETAIL_TEXTURE_FUNC_POINTS_SGIS 0x809C
-#endif
+#ifndef GL_ARB_copy_image
+#define GL_ARB_copy_image 1
+#endif /* GL_ARB_copy_image */
 
-#ifndef GL_SGIS_sharpen_texture
-#define GL_LINEAR_SHARPEN_SGIS            0x80AD
-#define GL_LINEAR_SHARPEN_ALPHA_SGIS      0x80AE
-#define GL_LINEAR_SHARPEN_COLOR_SGIS      0x80AF
-#define GL_SHARPEN_TEXTURE_FUNC_POINTS_SGIS 0x80B0
-#endif
+#ifndef GL_ARB_cull_distance
+#define GL_ARB_cull_distance 1
+#endif /* GL_ARB_cull_distance */
 
-#ifndef GL_EXT_packed_pixels
-#define GL_UNSIGNED_BYTE_3_3_2_EXT        0x8032
-#define GL_UNSIGNED_SHORT_4_4_4_4_EXT     0x8033
-#define GL_UNSIGNED_SHORT_5_5_5_1_EXT     0x8034
-#define GL_UNSIGNED_INT_8_8_8_8_EXT       0x8035
-#define GL_UNSIGNED_INT_10_10_10_2_EXT    0x8036
+#ifndef GL_ARB_debug_output
+#define GL_ARB_debug_output 1
+typedef void (APIENTRY  *GLDEBUGPROCARB)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,const void *userParam);
+#define GL_DEBUG_OUTPUT_SYNCHRONOUS_ARB   0x8242
+#define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH_ARB 0x8243
+#define GL_DEBUG_CALLBACK_FUNCTION_ARB    0x8244
+#define GL_DEBUG_CALLBACK_USER_PARAM_ARB  0x8245
+#define GL_DEBUG_SOURCE_API_ARB           0x8246
+#define GL_DEBUG_SOURCE_WINDOW_SYSTEM_ARB 0x8247
+#define GL_DEBUG_SOURCE_SHADER_COMPILER_ARB 0x8248
+#define GL_DEBUG_SOURCE_THIRD_PARTY_ARB   0x8249
+#define GL_DEBUG_SOURCE_APPLICATION_ARB   0x824A
+#define GL_DEBUG_SOURCE_OTHER_ARB         0x824B
+#define GL_DEBUG_TYPE_ERROR_ARB           0x824C
+#define GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR_ARB 0x824D
+#define GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR_ARB 0x824E
+#define GL_DEBUG_TYPE_PORTABILITY_ARB     0x824F
+#define GL_DEBUG_TYPE_PERFORMANCE_ARB     0x8250
+#define GL_DEBUG_TYPE_OTHER_ARB           0x8251
+#define GL_MAX_DEBUG_MESSAGE_LENGTH_ARB   0x9143
+#define GL_MAX_DEBUG_LOGGED_MESSAGES_ARB  0x9144
+#define GL_DEBUG_LOGGED_MESSAGES_ARB      0x9145
+#define GL_DEBUG_SEVERITY_HIGH_ARB        0x9146
+#define GL_DEBUG_SEVERITY_MEDIUM_ARB      0x9147
+#define GL_DEBUG_SEVERITY_LOW_ARB         0x9148
+typedef void (APIENTRYP PFNGLDEBUGMESSAGECONTROLARBPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTARBPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKARBPROC) (GLDEBUGPROCARB callback, const void *userParam);
+typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGARBPROC) (GLuint count, GLsizei bufSize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDebugMessageControlARB (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+GLAPI void APIENTRY glDebugMessageInsertARB (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
+GLAPI void APIENTRY glDebugMessageCallbackARB (GLDEBUGPROCARB callback, const void *userParam);
+GLAPI GLuint APIENTRY glGetDebugMessageLogARB (GLuint count, GLsizei bufSize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
 #endif
+#endif /* GL_ARB_debug_output */
 
-#ifndef GL_SGIS_texture_lod
-#define GL_TEXTURE_MIN_LOD_SGIS           0x813A
-#define GL_TEXTURE_MAX_LOD_SGIS           0x813B
-#define GL_TEXTURE_BASE_LEVEL_SGIS        0x813C
-#define GL_TEXTURE_MAX_LEVEL_SGIS         0x813D
-#endif
+#ifndef GL_ARB_depth_buffer_float
+#define GL_ARB_depth_buffer_float 1
+#endif /* GL_ARB_depth_buffer_float */
 
-#ifndef GL_SGIS_multisample
-#define GL_MULTISAMPLE_SGIS               0x809D
-#define GL_SAMPLE_ALPHA_TO_MASK_SGIS      0x809E
-#define GL_SAMPLE_ALPHA_TO_ONE_SGIS       0x809F
-#define GL_SAMPLE_MASK_SGIS               0x80A0
-#define GL_1PASS_SGIS                     0x80A1
-#define GL_2PASS_0_SGIS                   0x80A2
-#define GL_2PASS_1_SGIS                   0x80A3
-#define GL_4PASS_0_SGIS                   0x80A4
-#define GL_4PASS_1_SGIS                   0x80A5
-#define GL_4PASS_2_SGIS                   0x80A6
-#define GL_4PASS_3_SGIS                   0x80A7
-#define GL_SAMPLE_BUFFERS_SGIS            0x80A8
-#define GL_SAMPLES_SGIS                   0x80A9
-#define GL_SAMPLE_MASK_VALUE_SGIS         0x80AA
-#define GL_SAMPLE_MASK_INVERT_SGIS        0x80AB
-#define GL_SAMPLE_PATTERN_SGIS            0x80AC
-#endif
+#ifndef GL_ARB_depth_clamp
+#define GL_ARB_depth_clamp 1
+#endif /* GL_ARB_depth_clamp */
 
-#ifndef GL_EXT_rescale_normal
-#define GL_RESCALE_NORMAL_EXT             0x803A
-#endif
+#ifndef GL_ARB_depth_texture
+#define GL_ARB_depth_texture 1
+#define GL_DEPTH_COMPONENT16_ARB          0x81A5
+#define GL_DEPTH_COMPONENT24_ARB          0x81A6
+#define GL_DEPTH_COMPONENT32_ARB          0x81A7
+#define GL_TEXTURE_DEPTH_SIZE_ARB         0x884A
+#define GL_DEPTH_TEXTURE_MODE_ARB         0x884B
+#endif /* GL_ARB_depth_texture */
 
-#ifndef GL_EXT_vertex_array
-#define GL_VERTEX_ARRAY_EXT               0x8074
-#define GL_NORMAL_ARRAY_EXT               0x8075
-#define GL_COLOR_ARRAY_EXT                0x8076
-#define GL_INDEX_ARRAY_EXT                0x8077
-#define GL_TEXTURE_COORD_ARRAY_EXT        0x8078
-#define GL_EDGE_FLAG_ARRAY_EXT            0x8079
-#define GL_VERTEX_ARRAY_SIZE_EXT          0x807A
-#define GL_VERTEX_ARRAY_TYPE_EXT          0x807B
-#define GL_VERTEX_ARRAY_STRIDE_EXT        0x807C
-#define GL_VERTEX_ARRAY_COUNT_EXT         0x807D
-#define GL_NORMAL_ARRAY_TYPE_EXT          0x807E
-#define GL_NORMAL_ARRAY_STRIDE_EXT        0x807F
-#define GL_NORMAL_ARRAY_COUNT_EXT         0x8080
-#define GL_COLOR_ARRAY_SIZE_EXT           0x8081
-#define GL_COLOR_ARRAY_TYPE_EXT           0x8082
-#define GL_COLOR_ARRAY_STRIDE_EXT         0x8083
-#define GL_COLOR_ARRAY_COUNT_EXT          0x8084
-#define GL_INDEX_ARRAY_TYPE_EXT           0x8085
-#define GL_INDEX_ARRAY_STRIDE_EXT         0x8086
-#define GL_INDEX_ARRAY_COUNT_EXT          0x8087
-#define GL_TEXTURE_COORD_ARRAY_SIZE_EXT   0x8088
-#define GL_TEXTURE_COORD_ARRAY_TYPE_EXT   0x8089
-#define GL_TEXTURE_COORD_ARRAY_STRIDE_EXT 0x808A
-#define GL_TEXTURE_COORD_ARRAY_COUNT_EXT  0x808B
-#define GL_EDGE_FLAG_ARRAY_STRIDE_EXT     0x808C
-#define GL_EDGE_FLAG_ARRAY_COUNT_EXT      0x808D
-#define GL_VERTEX_ARRAY_POINTER_EXT       0x808E
-#define GL_NORMAL_ARRAY_POINTER_EXT       0x808F
-#define GL_COLOR_ARRAY_POINTER_EXT        0x8090
-#define GL_INDEX_ARRAY_POINTER_EXT        0x8091
-#define GL_TEXTURE_COORD_ARRAY_POINTER_EXT 0x8092
-#define GL_EDGE_FLAG_ARRAY_POINTER_EXT    0x8093
-#endif
+#ifndef GL_ARB_derivative_control
+#define GL_ARB_derivative_control 1
+#endif /* GL_ARB_derivative_control */
 
-#ifndef GL_EXT_misc_attribute
-#endif
+#ifndef GL_ARB_direct_state_access
+#define GL_ARB_direct_state_access 1
+#endif /* GL_ARB_direct_state_access */
 
-#ifndef GL_SGIS_generate_mipmap
-#define GL_GENERATE_MIPMAP_SGIS           0x8191
-#define GL_GENERATE_MIPMAP_HINT_SGIS      0x8192
+#ifndef GL_ARB_draw_buffers
+#define GL_ARB_draw_buffers 1
+#define GL_MAX_DRAW_BUFFERS_ARB           0x8824
+#define GL_DRAW_BUFFER0_ARB               0x8825
+#define GL_DRAW_BUFFER1_ARB               0x8826
+#define GL_DRAW_BUFFER2_ARB               0x8827
+#define GL_DRAW_BUFFER3_ARB               0x8828
+#define GL_DRAW_BUFFER4_ARB               0x8829
+#define GL_DRAW_BUFFER5_ARB               0x882A
+#define GL_DRAW_BUFFER6_ARB               0x882B
+#define GL_DRAW_BUFFER7_ARB               0x882C
+#define GL_DRAW_BUFFER8_ARB               0x882D
+#define GL_DRAW_BUFFER9_ARB               0x882E
+#define GL_DRAW_BUFFER10_ARB              0x882F
+#define GL_DRAW_BUFFER11_ARB              0x8830
+#define GL_DRAW_BUFFER12_ARB              0x8831
+#define GL_DRAW_BUFFER13_ARB              0x8832
+#define GL_DRAW_BUFFER14_ARB              0x8833
+#define GL_DRAW_BUFFER15_ARB              0x8834
+typedef void (APIENTRYP PFNGLDRAWBUFFERSARBPROC) (GLsizei n, const GLenum *bufs);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawBuffersARB (GLsizei n, const GLenum *bufs);
 #endif
+#endif /* GL_ARB_draw_buffers */
 
-#ifndef GL_SGIX_clipmap
-#define GL_LINEAR_CLIPMAP_LINEAR_SGIX     0x8170
-#define GL_TEXTURE_CLIPMAP_CENTER_SGIX    0x8171
-#define GL_TEXTURE_CLIPMAP_FRAME_SGIX     0x8172
-#define GL_TEXTURE_CLIPMAP_OFFSET_SGIX    0x8173
-#define GL_TEXTURE_CLIPMAP_VIRTUAL_DEPTH_SGIX 0x8174
-#define GL_TEXTURE_CLIPMAP_LOD_OFFSET_SGIX 0x8175
-#define GL_TEXTURE_CLIPMAP_DEPTH_SGIX     0x8176
-#define GL_MAX_CLIPMAP_DEPTH_SGIX         0x8177
-#define GL_MAX_CLIPMAP_VIRTUAL_DEPTH_SGIX 0x8178
-#define GL_NEAREST_CLIPMAP_NEAREST_SGIX   0x844D
-#define GL_NEAREST_CLIPMAP_LINEAR_SGIX    0x844E
-#define GL_LINEAR_CLIPMAP_NEAREST_SGIX    0x844F
+#ifndef GL_ARB_draw_buffers_blend
+#define GL_ARB_draw_buffers_blend 1
+typedef void (APIENTRYP PFNGLBLENDEQUATIONIARBPROC) (GLuint buf, GLenum mode);
+typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEIARBPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+typedef void (APIENTRYP PFNGLBLENDFUNCIARBPROC) (GLuint buf, GLenum src, GLenum dst);
+typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEIARBPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendEquationiARB (GLuint buf, GLenum mode);
+GLAPI void APIENTRY glBlendEquationSeparateiARB (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+GLAPI void APIENTRY glBlendFunciARB (GLuint buf, GLenum src, GLenum dst);
+GLAPI void APIENTRY glBlendFuncSeparateiARB (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
 #endif
+#endif /* GL_ARB_draw_buffers_blend */
 
-#ifndef GL_SGIX_shadow
-#define GL_TEXTURE_COMPARE_SGIX           0x819A
-#define GL_TEXTURE_COMPARE_OPERATOR_SGIX  0x819B
-#define GL_TEXTURE_LEQUAL_R_SGIX          0x819C
-#define GL_TEXTURE_GEQUAL_R_SGIX          0x819D
-#endif
+#ifndef GL_ARB_draw_elements_base_vertex
+#define GL_ARB_draw_elements_base_vertex 1
+#endif /* GL_ARB_draw_elements_base_vertex */
 
-#ifndef GL_SGIS_texture_edge_clamp
-#define GL_CLAMP_TO_EDGE_SGIS             0x812F
-#endif
+#ifndef GL_ARB_draw_indirect
+#define GL_ARB_draw_indirect 1
+#endif /* GL_ARB_draw_indirect */
 
-#ifndef GL_SGIS_texture_border_clamp
-#define GL_CLAMP_TO_BORDER_SGIS           0x812D
+#ifndef GL_ARB_draw_instanced
+#define GL_ARB_draw_instanced 1
+typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDARBPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDARBPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawArraysInstancedARB (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
+GLAPI void APIENTRY glDrawElementsInstancedARB (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
 #endif
+#endif /* GL_ARB_draw_instanced */
 
-#ifndef GL_EXT_blend_minmax
-#define GL_FUNC_ADD_EXT                   0x8006
-#define GL_MIN_EXT                        0x8007
-#define GL_MAX_EXT                        0x8008
-#define GL_BLEND_EQUATION_EXT             0x8009
-#endif
+#ifndef GL_ARB_enhanced_layouts
+#define GL_ARB_enhanced_layouts 1
+#endif /* GL_ARB_enhanced_layouts */
 
-#ifndef GL_EXT_blend_subtract
-#define GL_FUNC_SUBTRACT_EXT              0x800A
-#define GL_FUNC_REVERSE_SUBTRACT_EXT      0x800B
-#endif
+#ifndef GL_ARB_explicit_attrib_location
+#define GL_ARB_explicit_attrib_location 1
+#endif /* GL_ARB_explicit_attrib_location */
 
-#ifndef GL_EXT_blend_logic_op
-#endif
+#ifndef GL_ARB_explicit_uniform_location
+#define GL_ARB_explicit_uniform_location 1
+#endif /* GL_ARB_explicit_uniform_location */
 
-#ifndef GL_SGIX_interlace
-#define GL_INTERLACE_SGIX                 0x8094
-#endif
+#ifndef GL_ARB_fragment_coord_conventions
+#define GL_ARB_fragment_coord_conventions 1
+#endif /* GL_ARB_fragment_coord_conventions */
 
-#ifndef GL_SGIX_pixel_tiles
-#define GL_PIXEL_TILE_BEST_ALIGNMENT_SGIX 0x813E
-#define GL_PIXEL_TILE_CACHE_INCREMENT_SGIX 0x813F
-#define GL_PIXEL_TILE_WIDTH_SGIX          0x8140
-#define GL_PIXEL_TILE_HEIGHT_SGIX         0x8141
-#define GL_PIXEL_TILE_GRID_WIDTH_SGIX     0x8142
-#define GL_PIXEL_TILE_GRID_HEIGHT_SGIX    0x8143
-#define GL_PIXEL_TILE_GRID_DEPTH_SGIX     0x8144
-#define GL_PIXEL_TILE_CACHE_SIZE_SGIX     0x8145
-#endif
+#ifndef GL_ARB_fragment_layer_viewport
+#define GL_ARB_fragment_layer_viewport 1
+#endif /* GL_ARB_fragment_layer_viewport */
 
-#ifndef GL_SGIS_texture_select
-#define GL_DUAL_ALPHA4_SGIS               0x8110
-#define GL_DUAL_ALPHA8_SGIS               0x8111
-#define GL_DUAL_ALPHA12_SGIS              0x8112
-#define GL_DUAL_ALPHA16_SGIS              0x8113
-#define GL_DUAL_LUMINANCE4_SGIS           0x8114
-#define GL_DUAL_LUMINANCE8_SGIS           0x8115
-#define GL_DUAL_LUMINANCE12_SGIS          0x8116
-#define GL_DUAL_LUMINANCE16_SGIS          0x8117
-#define GL_DUAL_INTENSITY4_SGIS           0x8118
-#define GL_DUAL_INTENSITY8_SGIS           0x8119
-#define GL_DUAL_INTENSITY12_SGIS          0x811A
-#define GL_DUAL_INTENSITY16_SGIS          0x811B
-#define GL_DUAL_LUMINANCE_ALPHA4_SGIS     0x811C
-#define GL_DUAL_LUMINANCE_ALPHA8_SGIS     0x811D
-#define GL_QUAD_ALPHA4_SGIS               0x811E
-#define GL_QUAD_ALPHA8_SGIS               0x811F
-#define GL_QUAD_LUMINANCE4_SGIS           0x8120
-#define GL_QUAD_LUMINANCE8_SGIS           0x8121
-#define GL_QUAD_INTENSITY4_SGIS           0x8122
-#define GL_QUAD_INTENSITY8_SGIS           0x8123
-#define GL_DUAL_TEXTURE_SELECT_SGIS       0x8124
-#define GL_QUAD_TEXTURE_SELECT_SGIS       0x8125
+#ifndef GL_ARB_fragment_program
+#define GL_ARB_fragment_program 1
+#define GL_FRAGMENT_PROGRAM_ARB           0x8804
+#define GL_PROGRAM_FORMAT_ASCII_ARB       0x8875
+#define GL_PROGRAM_LENGTH_ARB             0x8627
+#define GL_PROGRAM_FORMAT_ARB             0x8876
+#define GL_PROGRAM_BINDING_ARB            0x8677
+#define GL_PROGRAM_INSTRUCTIONS_ARB       0x88A0
+#define GL_MAX_PROGRAM_INSTRUCTIONS_ARB   0x88A1
+#define GL_PROGRAM_NATIVE_INSTRUCTIONS_ARB 0x88A2
+#define GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB 0x88A3
+#define GL_PROGRAM_TEMPORARIES_ARB        0x88A4
+#define GL_MAX_PROGRAM_TEMPORARIES_ARB    0x88A5
+#define GL_PROGRAM_NATIVE_TEMPORARIES_ARB 0x88A6
+#define GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB 0x88A7
+#define GL_PROGRAM_PARAMETERS_ARB         0x88A8
+#define GL_MAX_PROGRAM_PARAMETERS_ARB     0x88A9
+#define GL_PROGRAM_NATIVE_PARAMETERS_ARB  0x88AA
+#define GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB 0x88AB
+#define GL_PROGRAM_ATTRIBS_ARB            0x88AC
+#define GL_MAX_PROGRAM_ATTRIBS_ARB        0x88AD
+#define GL_PROGRAM_NATIVE_ATTRIBS_ARB     0x88AE
+#define GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB 0x88AF
+#define GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB 0x88B4
+#define GL_MAX_PROGRAM_ENV_PARAMETERS_ARB 0x88B5
+#define GL_PROGRAM_UNDER_NATIVE_LIMITS_ARB 0x88B6
+#define GL_PROGRAM_ALU_INSTRUCTIONS_ARB   0x8805
+#define GL_PROGRAM_TEX_INSTRUCTIONS_ARB   0x8806
+#define GL_PROGRAM_TEX_INDIRECTIONS_ARB   0x8807
+#define GL_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB 0x8808
+#define GL_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB 0x8809
+#define GL_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB 0x880A
+#define GL_MAX_PROGRAM_ALU_INSTRUCTIONS_ARB 0x880B
+#define GL_MAX_PROGRAM_TEX_INSTRUCTIONS_ARB 0x880C
+#define GL_MAX_PROGRAM_TEX_INDIRECTIONS_ARB 0x880D
+#define GL_MAX_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB 0x880E
+#define GL_MAX_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB 0x880F
+#define GL_MAX_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB 0x8810
+#define GL_PROGRAM_STRING_ARB             0x8628
+#define GL_PROGRAM_ERROR_POSITION_ARB     0x864B
+#define GL_CURRENT_MATRIX_ARB             0x8641
+#define GL_TRANSPOSE_CURRENT_MATRIX_ARB   0x88B7
+#define GL_CURRENT_MATRIX_STACK_DEPTH_ARB 0x8640
+#define GL_MAX_PROGRAM_MATRICES_ARB       0x862F
+#define GL_MAX_PROGRAM_MATRIX_STACK_DEPTH_ARB 0x862E
+#define GL_MAX_TEXTURE_COORDS_ARB         0x8871
+#define GL_MAX_TEXTURE_IMAGE_UNITS_ARB    0x8872
+#define GL_PROGRAM_ERROR_STRING_ARB       0x8874
+#define GL_MATRIX0_ARB                    0x88C0
+#define GL_MATRIX1_ARB                    0x88C1
+#define GL_MATRIX2_ARB                    0x88C2
+#define GL_MATRIX3_ARB                    0x88C3
+#define GL_MATRIX4_ARB                    0x88C4
+#define GL_MATRIX5_ARB                    0x88C5
+#define GL_MATRIX6_ARB                    0x88C6
+#define GL_MATRIX7_ARB                    0x88C7
+#define GL_MATRIX8_ARB                    0x88C8
+#define GL_MATRIX9_ARB                    0x88C9
+#define GL_MATRIX10_ARB                   0x88CA
+#define GL_MATRIX11_ARB                   0x88CB
+#define GL_MATRIX12_ARB                   0x88CC
+#define GL_MATRIX13_ARB                   0x88CD
+#define GL_MATRIX14_ARB                   0x88CE
+#define GL_MATRIX15_ARB                   0x88CF
+#define GL_MATRIX16_ARB                   0x88D0
+#define GL_MATRIX17_ARB                   0x88D1
+#define GL_MATRIX18_ARB                   0x88D2
+#define GL_MATRIX19_ARB                   0x88D3
+#define GL_MATRIX20_ARB                   0x88D4
+#define GL_MATRIX21_ARB                   0x88D5
+#define GL_MATRIX22_ARB                   0x88D6
+#define GL_MATRIX23_ARB                   0x88D7
+#define GL_MATRIX24_ARB                   0x88D8
+#define GL_MATRIX25_ARB                   0x88D9
+#define GL_MATRIX26_ARB                   0x88DA
+#define GL_MATRIX27_ARB                   0x88DB
+#define GL_MATRIX28_ARB                   0x88DC
+#define GL_MATRIX29_ARB                   0x88DD
+#define GL_MATRIX30_ARB                   0x88DE
+#define GL_MATRIX31_ARB                   0x88DF
+typedef void (APIENTRYP PFNGLPROGRAMSTRINGARBPROC) (GLenum target, GLenum format, GLsizei len, const void *string);
+typedef void (APIENTRYP PFNGLBINDPROGRAMARBPROC) (GLenum target, GLuint program);
+typedef void (APIENTRYP PFNGLDELETEPROGRAMSARBPROC) (GLsizei n, const GLuint *programs);
+typedef void (APIENTRYP PFNGLGENPROGRAMSARBPROC) (GLsizei n, GLuint *programs);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4DARBPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4DVARBPROC) (GLenum target, GLuint index, const GLdouble *params);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4FARBPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4FVARBPROC) (GLenum target, GLuint index, const GLfloat *params);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4DARBPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4DVARBPROC) (GLenum target, GLuint index, const GLdouble *params);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4FARBPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4FVARBPROC) (GLenum target, GLuint index, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERDVARBPROC) (GLenum target, GLuint index, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERFVARBPROC) (GLenum target, GLuint index, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERDVARBPROC) (GLenum target, GLuint index, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERFVARBPROC) (GLenum target, GLuint index, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMIVARBPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMSTRINGARBPROC) (GLenum target, GLenum pname, void *string);
+typedef GLboolean (APIENTRYP PFNGLISPROGRAMARBPROC) (GLuint program);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramStringARB (GLenum target, GLenum format, GLsizei len, const void *string);
+GLAPI void APIENTRY glBindProgramARB (GLenum target, GLuint program);
+GLAPI void APIENTRY glDeleteProgramsARB (GLsizei n, const GLuint *programs);
+GLAPI void APIENTRY glGenProgramsARB (GLsizei n, GLuint *programs);
+GLAPI void APIENTRY glProgramEnvParameter4dARB (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glProgramEnvParameter4dvARB (GLenum target, GLuint index, const GLdouble *params);
+GLAPI void APIENTRY glProgramEnvParameter4fARB (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glProgramEnvParameter4fvARB (GLenum target, GLuint index, const GLfloat *params);
+GLAPI void APIENTRY glProgramLocalParameter4dARB (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glProgramLocalParameter4dvARB (GLenum target, GLuint index, const GLdouble *params);
+GLAPI void APIENTRY glProgramLocalParameter4fARB (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glProgramLocalParameter4fvARB (GLenum target, GLuint index, const GLfloat *params);
+GLAPI void APIENTRY glGetProgramEnvParameterdvARB (GLenum target, GLuint index, GLdouble *params);
+GLAPI void APIENTRY glGetProgramEnvParameterfvARB (GLenum target, GLuint index, GLfloat *params);
+GLAPI void APIENTRY glGetProgramLocalParameterdvARB (GLenum target, GLuint index, GLdouble *params);
+GLAPI void APIENTRY glGetProgramLocalParameterfvARB (GLenum target, GLuint index, GLfloat *params);
+GLAPI void APIENTRY glGetProgramivARB (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetProgramStringARB (GLenum target, GLenum pname, void *string);
+GLAPI GLboolean APIENTRY glIsProgramARB (GLuint program);
 #endif
+#endif /* GL_ARB_fragment_program */
 
-#ifndef GL_SGIX_sprite
-#define GL_SPRITE_SGIX                    0x8148
-#define GL_SPRITE_MODE_SGIX               0x8149
-#define GL_SPRITE_AXIS_SGIX               0x814A
-#define GL_SPRITE_TRANSLATION_SGIX        0x814B
-#define GL_SPRITE_AXIAL_SGIX              0x814C
-#define GL_SPRITE_OBJECT_ALIGNED_SGIX     0x814D
-#define GL_SPRITE_EYE_ALIGNED_SGIX        0x814E
-#endif
+#ifndef GL_ARB_fragment_program_shadow
+#define GL_ARB_fragment_program_shadow 1
+#endif /* GL_ARB_fragment_program_shadow */
 
-#ifndef GL_SGIX_texture_multi_buffer
-#define GL_TEXTURE_MULTI_BUFFER_HINT_SGIX 0x812E
-#endif
+#ifndef GL_ARB_fragment_shader
+#define GL_ARB_fragment_shader 1
+#define GL_FRAGMENT_SHADER_ARB            0x8B30
+#define GL_MAX_FRAGMENT_UNIFORM_COMPONENTS_ARB 0x8B49
+#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT_ARB 0x8B8B
+#endif /* GL_ARB_fragment_shader */
 
-#ifndef GL_EXT_point_parameters
-#define GL_POINT_SIZE_MIN_EXT             0x8126
-#define GL_POINT_SIZE_MAX_EXT             0x8127
-#define GL_POINT_FADE_THRESHOLD_SIZE_EXT  0x8128
-#define GL_DISTANCE_ATTENUATION_EXT       0x8129
-#endif
+#ifndef GL_ARB_framebuffer_no_attachments
+#define GL_ARB_framebuffer_no_attachments 1
+#endif /* GL_ARB_framebuffer_no_attachments */
 
-#ifndef GL_SGIS_point_parameters
-#define GL_POINT_SIZE_MIN_SGIS            0x8126
-#define GL_POINT_SIZE_MAX_SGIS            0x8127
-#define GL_POINT_FADE_THRESHOLD_SIZE_SGIS 0x8128
-#define GL_DISTANCE_ATTENUATION_SGIS      0x8129
-#endif
+#ifndef GL_ARB_framebuffer_object
+#define GL_ARB_framebuffer_object 1
+#endif /* GL_ARB_framebuffer_object */
 
-#ifndef GL_SGIX_instruments
-#define GL_INSTRUMENT_BUFFER_POINTER_SGIX 0x8180
-#define GL_INSTRUMENT_MEASUREMENTS_SGIX   0x8181
-#endif
+#ifndef GL_ARB_framebuffer_sRGB
+#define GL_ARB_framebuffer_sRGB 1
+#endif /* GL_ARB_framebuffer_sRGB */
 
-#ifndef GL_SGIX_texture_scale_bias
-#define GL_POST_TEXTURE_FILTER_BIAS_SGIX  0x8179
-#define GL_POST_TEXTURE_FILTER_SCALE_SGIX 0x817A
-#define GL_POST_TEXTURE_FILTER_BIAS_RANGE_SGIX 0x817B
-#define GL_POST_TEXTURE_FILTER_SCALE_RANGE_SGIX 0x817C
+#ifndef GL_ARB_geometry_shader4
+#define GL_ARB_geometry_shader4 1
+#define GL_LINES_ADJACENCY_ARB            0x000A
+#define GL_LINE_STRIP_ADJACENCY_ARB       0x000B
+#define GL_TRIANGLES_ADJACENCY_ARB        0x000C
+#define GL_TRIANGLE_STRIP_ADJACENCY_ARB   0x000D
+#define GL_PROGRAM_POINT_SIZE_ARB         0x8642
+#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_ARB 0x8C29
+#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_ARB 0x8DA7
+#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_ARB 0x8DA8
+#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_ARB 0x8DA9
+#define GL_GEOMETRY_SHADER_ARB            0x8DD9
+#define GL_GEOMETRY_VERTICES_OUT_ARB      0x8DDA
+#define GL_GEOMETRY_INPUT_TYPE_ARB        0x8DDB
+#define GL_GEOMETRY_OUTPUT_TYPE_ARB       0x8DDC
+#define GL_MAX_GEOMETRY_VARYING_COMPONENTS_ARB 0x8DDD
+#define GL_MAX_VERTEX_VARYING_COMPONENTS_ARB 0x8DDE
+#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS_ARB 0x8DDF
+#define GL_MAX_GEOMETRY_OUTPUT_VERTICES_ARB 0x8DE0
+#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS_ARB 0x8DE1
+typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIARBPROC) (GLuint program, GLenum pname, GLint value);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYERARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREFACEARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramParameteriARB (GLuint program, GLenum pname, GLint value);
+GLAPI void APIENTRY glFramebufferTextureARB (GLenum target, GLenum attachment, GLuint texture, GLint level);
+GLAPI void APIENTRY glFramebufferTextureLayerARB (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
+GLAPI void APIENTRY glFramebufferTextureFaceARB (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
 #endif
+#endif /* GL_ARB_geometry_shader4 */
 
-#ifndef GL_SGIX_framezoom
-#define GL_FRAMEZOOM_SGIX                 0x818B
-#define GL_FRAMEZOOM_FACTOR_SGIX          0x818C
-#define GL_MAX_FRAMEZOOM_FACTOR_SGIX      0x818D
-#endif
+#ifndef GL_ARB_get_program_binary
+#define GL_ARB_get_program_binary 1
+#endif /* GL_ARB_get_program_binary */
 
-#ifndef GL_SGIX_tag_sample_buffer
-#endif
+#ifndef GL_ARB_get_texture_sub_image
+#define GL_ARB_get_texture_sub_image 1
+#endif /* GL_ARB_get_texture_sub_image */
 
-#ifndef GL_FfdMaskSGIX
-#define GL_TEXTURE_DEFORMATION_BIT_SGIX   0x00000001
-#define GL_GEOMETRY_DEFORMATION_BIT_SGIX  0x00000002
-#endif
+#ifndef GL_ARB_gpu_shader5
+#define GL_ARB_gpu_shader5 1
+#endif /* GL_ARB_gpu_shader5 */
 
-#ifndef GL_SGIX_polynomial_ffd
-#define GL_GEOMETRY_DEFORMATION_SGIX      0x8194
-#define GL_TEXTURE_DEFORMATION_SGIX       0x8195
-#define GL_DEFORMATIONS_MASK_SGIX         0x8196
-#define GL_MAX_DEFORMATION_ORDER_SGIX     0x8197
-#endif
+#ifndef GL_ARB_gpu_shader_fp64
+#define GL_ARB_gpu_shader_fp64 1
+#endif /* GL_ARB_gpu_shader_fp64 */
 
-#ifndef GL_SGIX_reference_plane
-#define GL_REFERENCE_PLANE_SGIX           0x817D
-#define GL_REFERENCE_PLANE_EQUATION_SGIX  0x817E
-#endif
+#ifndef GL_ARB_half_float_pixel
+#define GL_ARB_half_float_pixel 1
+typedef unsigned short GLhalfARB;
+#define GL_HALF_FLOAT_ARB                 0x140B
+#endif /* GL_ARB_half_float_pixel */
 
-#ifndef GL_SGIX_flush_raster
-#endif
+#ifndef GL_ARB_half_float_vertex
+#define GL_ARB_half_float_vertex 1
+#endif /* GL_ARB_half_float_vertex */
 
-#ifndef GL_SGIX_depth_texture
-#define GL_DEPTH_COMPONENT16_SGIX         0x81A5
-#define GL_DEPTH_COMPONENT24_SGIX         0x81A6
-#define GL_DEPTH_COMPONENT32_SGIX         0x81A7
+#ifndef GL_ARB_imaging
+#define GL_ARB_imaging 1
+#define GL_BLEND_COLOR                    0x8005
+#define GL_BLEND_EQUATION                 0x8009
+#define GL_CONVOLUTION_1D                 0x8010
+#define GL_CONVOLUTION_2D                 0x8011
+#define GL_SEPARABLE_2D                   0x8012
+#define GL_CONVOLUTION_BORDER_MODE        0x8013
+#define GL_CONVOLUTION_FILTER_SCALE       0x8014
+#define GL_CONVOLUTION_FILTER_BIAS        0x8015
+#define GL_REDUCE                         0x8016
+#define GL_CONVOLUTION_FORMAT             0x8017
+#define GL_CONVOLUTION_WIDTH              0x8018
+#define GL_CONVOLUTION_HEIGHT             0x8019
+#define GL_MAX_CONVOLUTION_WIDTH          0x801A
+#define GL_MAX_CONVOLUTION_HEIGHT         0x801B
+#define GL_POST_CONVOLUTION_RED_SCALE     0x801C
+#define GL_POST_CONVOLUTION_GREEN_SCALE   0x801D
+#define GL_POST_CONVOLUTION_BLUE_SCALE    0x801E
+#define GL_POST_CONVOLUTION_ALPHA_SCALE   0x801F
+#define GL_POST_CONVOLUTION_RED_BIAS      0x8020
+#define GL_POST_CONVOLUTION_GREEN_BIAS    0x8021
+#define GL_POST_CONVOLUTION_BLUE_BIAS     0x8022
+#define GL_POST_CONVOLUTION_ALPHA_BIAS    0x8023
+#define GL_HISTOGRAM                      0x8024
+#define GL_PROXY_HISTOGRAM                0x8025
+#define GL_HISTOGRAM_WIDTH                0x8026
+#define GL_HISTOGRAM_FORMAT               0x8027
+#define GL_HISTOGRAM_RED_SIZE             0x8028
+#define GL_HISTOGRAM_GREEN_SIZE           0x8029
+#define GL_HISTOGRAM_BLUE_SIZE            0x802A
+#define GL_HISTOGRAM_ALPHA_SIZE           0x802B
+#define GL_HISTOGRAM_LUMINANCE_SIZE       0x802C
+#define GL_HISTOGRAM_SINK                 0x802D
+#define GL_MINMAX                         0x802E
+#define GL_MINMAX_FORMAT                  0x802F
+#define GL_MINMAX_SINK                    0x8030
+#define GL_TABLE_TOO_LARGE                0x8031
+#define GL_COLOR_MATRIX                   0x80B1
+#define GL_COLOR_MATRIX_STACK_DEPTH       0x80B2
+#define GL_MAX_COLOR_MATRIX_STACK_DEPTH   0x80B3
+#define GL_POST_COLOR_MATRIX_RED_SCALE    0x80B4
+#define GL_POST_COLOR_MATRIX_GREEN_SCALE  0x80B5
+#define GL_POST_COLOR_MATRIX_BLUE_SCALE   0x80B6
+#define GL_POST_COLOR_MATRIX_ALPHA_SCALE  0x80B7
+#define GL_POST_COLOR_MATRIX_RED_BIAS     0x80B8
+#define GL_POST_COLOR_MATRIX_GREEN_BIAS   0x80B9
+#define GL_POST_COLOR_MATRIX_BLUE_BIAS    0x80BA
+#define GL_POST_COLOR_MATRIX_ALPHA_BIAS   0x80BB
+#define GL_COLOR_TABLE                    0x80D0
+#define GL_POST_CONVOLUTION_COLOR_TABLE   0x80D1
+#define GL_POST_COLOR_MATRIX_COLOR_TABLE  0x80D2
+#define GL_PROXY_COLOR_TABLE              0x80D3
+#define GL_PROXY_POST_CONVOLUTION_COLOR_TABLE 0x80D4
+#define GL_PROXY_POST_COLOR_MATRIX_COLOR_TABLE 0x80D5
+#define GL_COLOR_TABLE_SCALE              0x80D6
+#define GL_COLOR_TABLE_BIAS               0x80D7
+#define GL_COLOR_TABLE_FORMAT             0x80D8
+#define GL_COLOR_TABLE_WIDTH              0x80D9
+#define GL_COLOR_TABLE_RED_SIZE           0x80DA
+#define GL_COLOR_TABLE_GREEN_SIZE         0x80DB
+#define GL_COLOR_TABLE_BLUE_SIZE          0x80DC
+#define GL_COLOR_TABLE_ALPHA_SIZE         0x80DD
+#define GL_COLOR_TABLE_LUMINANCE_SIZE     0x80DE
+#define GL_COLOR_TABLE_INTENSITY_SIZE     0x80DF
+#define GL_CONSTANT_BORDER                0x8151
+#define GL_REPLICATE_BORDER               0x8153
+#define GL_CONVOLUTION_BORDER_COLOR       0x8154
+typedef void (APIENTRYP PFNGLCOLORTABLEPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *table);
+typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERFVPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERIVPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLCOPYCOLORTABLEPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPROC) (GLenum target, GLenum format, GLenum type, void *table);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLCOLORSUBTABLEPROC) (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLCOPYCOLORSUBTABLEPROC) (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER1DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *image);
+typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER2DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *image);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFPROC) (GLenum target, GLenum pname, GLfloat params);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFVPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIPROC) (GLenum target, GLenum pname, GLint params);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIVPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER1DPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER2DPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONFILTERPROC) (GLenum target, GLenum format, GLenum type, void *image);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETSEPARABLEFILTERPROC) (GLenum target, GLenum format, GLenum type, void *row, void *column, void *span);
+typedef void (APIENTRYP PFNGLSEPARABLEFILTER2DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *row, const void *column);
+typedef void (APIENTRYP PFNGLGETHISTOGRAMPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMINMAXPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLHISTOGRAMPROC) (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
+typedef void (APIENTRYP PFNGLMINMAXPROC) (GLenum target, GLenum internalformat, GLboolean sink);
+typedef void (APIENTRYP PFNGLRESETHISTOGRAMPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLRESETMINMAXPROC) (GLenum target);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glColorTable (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *table);
+GLAPI void APIENTRY glColorTableParameterfv (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glColorTableParameteriv (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glCopyColorTable (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glGetColorTable (GLenum target, GLenum format, GLenum type, void *table);
+GLAPI void APIENTRY glGetColorTableParameterfv (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetColorTableParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glColorSubTable (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glCopyColorSubTable (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glConvolutionFilter1D (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *image);
+GLAPI void APIENTRY glConvolutionFilter2D (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *image);
+GLAPI void APIENTRY glConvolutionParameterf (GLenum target, GLenum pname, GLfloat params);
+GLAPI void APIENTRY glConvolutionParameterfv (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glConvolutionParameteri (GLenum target, GLenum pname, GLint params);
+GLAPI void APIENTRY glConvolutionParameteriv (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glCopyConvolutionFilter1D (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glCopyConvolutionFilter2D (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetConvolutionFilter (GLenum target, GLenum format, GLenum type, void *image);
+GLAPI void APIENTRY glGetConvolutionParameterfv (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetConvolutionParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetSeparableFilter (GLenum target, GLenum format, GLenum type, void *row, void *column, void *span);
+GLAPI void APIENTRY glSeparableFilter2D (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *row, const void *column);
+GLAPI void APIENTRY glGetHistogram (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+GLAPI void APIENTRY glGetHistogramParameterfv (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetHistogramParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMinmax (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+GLAPI void APIENTRY glGetMinmaxParameterfv (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMinmaxParameteriv (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glHistogram (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
+GLAPI void APIENTRY glMinmax (GLenum target, GLenum internalformat, GLboolean sink);
+GLAPI void APIENTRY glResetHistogram (GLenum target);
+GLAPI void APIENTRY glResetMinmax (GLenum target);
 #endif
+#endif /* GL_ARB_imaging */
 
-#ifndef GL_SGIS_fog_function
-#define GL_FOG_FUNC_SGIS                  0x812A
-#define GL_FOG_FUNC_POINTS_SGIS           0x812B
-#define GL_MAX_FOG_FUNC_POINTS_SGIS       0x812C
+#ifndef GL_ARB_indirect_parameters
+#define GL_ARB_indirect_parameters 1
+#define GL_PARAMETER_BUFFER_ARB           0x80EE
+#define GL_PARAMETER_BUFFER_BINDING_ARB   0x80EF
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTCOUNTARBPROC) (GLenum mode, GLintptr indirect, GLintptr drawcount, GLsizei maxdrawcount, GLsizei stride);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTCOUNTARBPROC) (GLenum mode, GLenum type, GLintptr indirect, GLintptr drawcount, GLsizei maxdrawcount, GLsizei stride);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiDrawArraysIndirectCountARB (GLenum mode, GLintptr indirect, GLintptr drawcount, GLsizei maxdrawcount, GLsizei stride);
+GLAPI void APIENTRY glMultiDrawElementsIndirectCountARB (GLenum mode, GLenum type, GLintptr indirect, GLintptr drawcount, GLsizei maxdrawcount, GLsizei stride);
 #endif
+#endif /* GL_ARB_indirect_parameters */
 
-#ifndef GL_SGIX_fog_offset
-#define GL_FOG_OFFSET_SGIX                0x8198
-#define GL_FOG_OFFSET_VALUE_SGIX          0x8199
+#ifndef GL_ARB_instanced_arrays
+#define GL_ARB_instanced_arrays 1
+#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ARB 0x88FE
+typedef void (APIENTRYP PFNGLVERTEXATTRIBDIVISORARBPROC) (GLuint index, GLuint divisor);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexAttribDivisorARB (GLuint index, GLuint divisor);
 #endif
+#endif /* GL_ARB_instanced_arrays */
 
-#ifndef GL_HP_image_transform
-#define GL_IMAGE_SCALE_X_HP               0x8155
-#define GL_IMAGE_SCALE_Y_HP               0x8156
-#define GL_IMAGE_TRANSLATE_X_HP           0x8157
-#define GL_IMAGE_TRANSLATE_Y_HP           0x8158
-#define GL_IMAGE_ROTATE_ANGLE_HP          0x8159
-#define GL_IMAGE_ROTATE_ORIGIN_X_HP       0x815A
-#define GL_IMAGE_ROTATE_ORIGIN_Y_HP       0x815B
-#define GL_IMAGE_MAG_FILTER_HP            0x815C
-#define GL_IMAGE_MIN_FILTER_HP            0x815D
-#define GL_IMAGE_CUBIC_WEIGHT_HP          0x815E
-#define GL_CUBIC_HP                       0x815F
-#define GL_AVERAGE_HP                     0x8160
-#define GL_IMAGE_TRANSFORM_2D_HP          0x8161
-#define GL_POST_IMAGE_TRANSFORM_COLOR_TABLE_HP 0x8162
-#define GL_PROXY_POST_IMAGE_TRANSFORM_COLOR_TABLE_HP 0x8163
-#endif
+#ifndef GL_ARB_internalformat_query
+#define GL_ARB_internalformat_query 1
+#endif /* GL_ARB_internalformat_query */
 
-#ifndef GL_HP_convolution_border_modes
-#define GL_IGNORE_BORDER_HP               0x8150
-#define GL_CONSTANT_BORDER_HP             0x8151
-#define GL_REPLICATE_BORDER_HP            0x8153
-#define GL_CONVOLUTION_BORDER_COLOR_HP    0x8154
-#endif
+#ifndef GL_ARB_internalformat_query2
+#define GL_ARB_internalformat_query2 1
+#define GL_SRGB_DECODE_ARB                0x8299
+#endif /* GL_ARB_internalformat_query2 */
 
-#ifndef GL_INGR_palette_buffer
-#endif
+#ifndef GL_ARB_invalidate_subdata
+#define GL_ARB_invalidate_subdata 1
+#endif /* GL_ARB_invalidate_subdata */
 
-#ifndef GL_SGIX_texture_add_env
-#define GL_TEXTURE_ENV_BIAS_SGIX          0x80BE
-#endif
+#ifndef GL_ARB_map_buffer_alignment
+#define GL_ARB_map_buffer_alignment 1
+#endif /* GL_ARB_map_buffer_alignment */
 
-#ifndef GL_EXT_color_subtable
-#endif
+#ifndef GL_ARB_map_buffer_range
+#define GL_ARB_map_buffer_range 1
+#endif /* GL_ARB_map_buffer_range */
 
-#ifndef GL_PGI_vertex_hints
-#define GL_VERTEX_DATA_HINT_PGI           0x1A22A
-#define GL_VERTEX_CONSISTENT_HINT_PGI     0x1A22B
-#define GL_MATERIAL_SIDE_HINT_PGI         0x1A22C
-#define GL_MAX_VERTEX_HINT_PGI            0x1A22D
-#define GL_COLOR3_BIT_PGI                 0x00010000
-#define GL_COLOR4_BIT_PGI                 0x00020000
-#define GL_EDGEFLAG_BIT_PGI               0x00040000
-#define GL_INDEX_BIT_PGI                  0x00080000
-#define GL_MAT_AMBIENT_BIT_PGI            0x00100000
-#define GL_MAT_AMBIENT_AND_DIFFUSE_BIT_PGI 0x00200000
-#define GL_MAT_DIFFUSE_BIT_PGI            0x00400000
-#define GL_MAT_EMISSION_BIT_PGI           0x00800000
-#define GL_MAT_COLOR_INDEXES_BIT_PGI      0x01000000
-#define GL_MAT_SHININESS_BIT_PGI          0x02000000
-#define GL_MAT_SPECULAR_BIT_PGI           0x04000000
-#define GL_NORMAL_BIT_PGI                 0x08000000
-#define GL_TEXCOORD1_BIT_PGI              0x10000000
-#define GL_TEXCOORD2_BIT_PGI              0x20000000
-#define GL_TEXCOORD3_BIT_PGI              0x40000000
-#define GL_TEXCOORD4_BIT_PGI              0x80000000
-#define GL_VERTEX23_BIT_PGI               0x00000004
-#define GL_VERTEX4_BIT_PGI                0x00000008
+#ifndef GL_ARB_matrix_palette
+#define GL_ARB_matrix_palette 1
+#define GL_MATRIX_PALETTE_ARB             0x8840
+#define GL_MAX_MATRIX_PALETTE_STACK_DEPTH_ARB 0x8841
+#define GL_MAX_PALETTE_MATRICES_ARB       0x8842
+#define GL_CURRENT_PALETTE_MATRIX_ARB     0x8843
+#define GL_MATRIX_INDEX_ARRAY_ARB         0x8844
+#define GL_CURRENT_MATRIX_INDEX_ARB       0x8845
+#define GL_MATRIX_INDEX_ARRAY_SIZE_ARB    0x8846
+#define GL_MATRIX_INDEX_ARRAY_TYPE_ARB    0x8847
+#define GL_MATRIX_INDEX_ARRAY_STRIDE_ARB  0x8848
+#define GL_MATRIX_INDEX_ARRAY_POINTER_ARB 0x8849
+typedef void (APIENTRYP PFNGLCURRENTPALETTEMATRIXARBPROC) (GLint index);
+typedef void (APIENTRYP PFNGLMATRIXINDEXUBVARBPROC) (GLint size, const GLubyte *indices);
+typedef void (APIENTRYP PFNGLMATRIXINDEXUSVARBPROC) (GLint size, const GLushort *indices);
+typedef void (APIENTRYP PFNGLMATRIXINDEXUIVARBPROC) (GLint size, const GLuint *indices);
+typedef void (APIENTRYP PFNGLMATRIXINDEXPOINTERARBPROC) (GLint size, GLenum type, GLsizei stride, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glCurrentPaletteMatrixARB (GLint index);
+GLAPI void APIENTRY glMatrixIndexubvARB (GLint size, const GLubyte *indices);
+GLAPI void APIENTRY glMatrixIndexusvARB (GLint size, const GLushort *indices);
+GLAPI void APIENTRY glMatrixIndexuivARB (GLint size, const GLuint *indices);
+GLAPI void APIENTRY glMatrixIndexPointerARB (GLint size, GLenum type, GLsizei stride, const void *pointer);
 #endif
+#endif /* GL_ARB_matrix_palette */
 
-#ifndef GL_PGI_misc_hints
-#define GL_PREFER_DOUBLEBUFFER_HINT_PGI   0x1A1F8
-#define GL_CONSERVE_MEMORY_HINT_PGI       0x1A1FD
-#define GL_RECLAIM_MEMORY_HINT_PGI        0x1A1FE
-#define GL_NATIVE_GRAPHICS_HANDLE_PGI     0x1A202
-#define GL_NATIVE_GRAPHICS_BEGIN_HINT_PGI 0x1A203
-#define GL_NATIVE_GRAPHICS_END_HINT_PGI   0x1A204
-#define GL_ALWAYS_FAST_HINT_PGI           0x1A20C
-#define GL_ALWAYS_SOFT_HINT_PGI           0x1A20D
-#define GL_ALLOW_DRAW_OBJ_HINT_PGI        0x1A20E
-#define GL_ALLOW_DRAW_WIN_HINT_PGI        0x1A20F
-#define GL_ALLOW_DRAW_FRG_HINT_PGI        0x1A210
-#define GL_ALLOW_DRAW_MEM_HINT_PGI        0x1A211
-#define GL_STRICT_DEPTHFUNC_HINT_PGI      0x1A216
-#define GL_STRICT_LIGHTING_HINT_PGI       0x1A217
-#define GL_STRICT_SCISSOR_HINT_PGI        0x1A218
-#define GL_FULL_STIPPLE_HINT_PGI          0x1A219
-#define GL_CLIP_NEAR_HINT_PGI             0x1A220
-#define GL_CLIP_FAR_HINT_PGI              0x1A221
-#define GL_WIDE_LINE_HINT_PGI             0x1A222
-#define GL_BACK_NORMALS_HINT_PGI          0x1A223
-#endif
+#ifndef GL_ARB_multi_bind
+#define GL_ARB_multi_bind 1
+#endif /* GL_ARB_multi_bind */
 
-#ifndef GL_EXT_paletted_texture
-#define GL_COLOR_INDEX1_EXT               0x80E2
-#define GL_COLOR_INDEX2_EXT               0x80E3
-#define GL_COLOR_INDEX4_EXT               0x80E4
-#define GL_COLOR_INDEX8_EXT               0x80E5
-#define GL_COLOR_INDEX12_EXT              0x80E6
-#define GL_COLOR_INDEX16_EXT              0x80E7
-#define GL_TEXTURE_INDEX_SIZE_EXT         0x80ED
-#endif
+#ifndef GL_ARB_multi_draw_indirect
+#define GL_ARB_multi_draw_indirect 1
+#endif /* GL_ARB_multi_draw_indirect */
 
-#ifndef GL_EXT_clip_volume_hint
-#define GL_CLIP_VOLUME_CLIPPING_HINT_EXT  0x80F0
+#ifndef GL_ARB_multisample
+#define GL_ARB_multisample 1
+#define GL_MULTISAMPLE_ARB                0x809D
+#define GL_SAMPLE_ALPHA_TO_COVERAGE_ARB   0x809E
+#define GL_SAMPLE_ALPHA_TO_ONE_ARB        0x809F
+#define GL_SAMPLE_COVERAGE_ARB            0x80A0
+#define GL_SAMPLE_BUFFERS_ARB             0x80A8
+#define GL_SAMPLES_ARB                    0x80A9
+#define GL_SAMPLE_COVERAGE_VALUE_ARB      0x80AA
+#define GL_SAMPLE_COVERAGE_INVERT_ARB     0x80AB
+#define GL_MULTISAMPLE_BIT_ARB            0x20000000
+typedef void (APIENTRYP PFNGLSAMPLECOVERAGEARBPROC) (GLfloat value, GLboolean invert);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glSampleCoverageARB (GLfloat value, GLboolean invert);
 #endif
+#endif /* GL_ARB_multisample */
 
-#ifndef GL_SGIX_list_priority
-#define GL_LIST_PRIORITY_SGIX             0x8182
+#ifndef GL_ARB_multitexture
+#define GL_ARB_multitexture 1
+#define GL_TEXTURE0_ARB                   0x84C0
+#define GL_TEXTURE1_ARB                   0x84C1
+#define GL_TEXTURE2_ARB                   0x84C2
+#define GL_TEXTURE3_ARB                   0x84C3
+#define GL_TEXTURE4_ARB                   0x84C4
+#define GL_TEXTURE5_ARB                   0x84C5
+#define GL_TEXTURE6_ARB                   0x84C6
+#define GL_TEXTURE7_ARB                   0x84C7
+#define GL_TEXTURE8_ARB                   0x84C8
+#define GL_TEXTURE9_ARB                   0x84C9
+#define GL_TEXTURE10_ARB                  0x84CA
+#define GL_TEXTURE11_ARB                  0x84CB
+#define GL_TEXTURE12_ARB                  0x84CC
+#define GL_TEXTURE13_ARB                  0x84CD
+#define GL_TEXTURE14_ARB                  0x84CE
+#define GL_TEXTURE15_ARB                  0x84CF
+#define GL_TEXTURE16_ARB                  0x84D0
+#define GL_TEXTURE17_ARB                  0x84D1
+#define GL_TEXTURE18_ARB                  0x84D2
+#define GL_TEXTURE19_ARB                  0x84D3
+#define GL_TEXTURE20_ARB                  0x84D4
+#define GL_TEXTURE21_ARB                  0x84D5
+#define GL_TEXTURE22_ARB                  0x84D6
+#define GL_TEXTURE23_ARB                  0x84D7
+#define GL_TEXTURE24_ARB                  0x84D8
+#define GL_TEXTURE25_ARB                  0x84D9
+#define GL_TEXTURE26_ARB                  0x84DA
+#define GL_TEXTURE27_ARB                  0x84DB
+#define GL_TEXTURE28_ARB                  0x84DC
+#define GL_TEXTURE29_ARB                  0x84DD
+#define GL_TEXTURE30_ARB                  0x84DE
+#define GL_TEXTURE31_ARB                  0x84DF
+#define GL_ACTIVE_TEXTURE_ARB             0x84E0
+#define GL_CLIENT_ACTIVE_TEXTURE_ARB      0x84E1
+#define GL_MAX_TEXTURE_UNITS_ARB          0x84E2
+typedef void (APIENTRYP PFNGLACTIVETEXTUREARBPROC) (GLenum texture);
+typedef void (APIENTRYP PFNGLCLIENTACTIVETEXTUREARBPROC) (GLenum texture);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1DARBPROC) (GLenum target, GLdouble s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1DVARBPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1FARBPROC) (GLenum target, GLfloat s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1FVARBPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1IARBPROC) (GLenum target, GLint s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1IVARBPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1SARBPROC) (GLenum target, GLshort s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1SVARBPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2DARBPROC) (GLenum target, GLdouble s, GLdouble t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2DVARBPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2FARBPROC) (GLenum target, GLfloat s, GLfloat t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2FVARBPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2IARBPROC) (GLenum target, GLint s, GLint t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2IVARBPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2SARBPROC) (GLenum target, GLshort s, GLshort t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2SVARBPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3DARBPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3DVARBPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3FARBPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3FVARBPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3IARBPROC) (GLenum target, GLint s, GLint t, GLint r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3IVARBPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3SARBPROC) (GLenum target, GLshort s, GLshort t, GLshort r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3SVARBPROC) (GLenum target, const GLshort *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4DARBPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4DVARBPROC) (GLenum target, const GLdouble *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4FARBPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4FVARBPROC) (GLenum target, const GLfloat *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4IARBPROC) (GLenum target, GLint s, GLint t, GLint r, GLint q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4IVARBPROC) (GLenum target, const GLint *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4SARBPROC) (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4SVARBPROC) (GLenum target, const GLshort *v);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glActiveTextureARB (GLenum texture);
+GLAPI void APIENTRY glClientActiveTextureARB (GLenum texture);
+GLAPI void APIENTRY glMultiTexCoord1dARB (GLenum target, GLdouble s);
+GLAPI void APIENTRY glMultiTexCoord1dvARB (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord1fARB (GLenum target, GLfloat s);
+GLAPI void APIENTRY glMultiTexCoord1fvARB (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord1iARB (GLenum target, GLint s);
+GLAPI void APIENTRY glMultiTexCoord1ivARB (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord1sARB (GLenum target, GLshort s);
+GLAPI void APIENTRY glMultiTexCoord1svARB (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glMultiTexCoord2dARB (GLenum target, GLdouble s, GLdouble t);
+GLAPI void APIENTRY glMultiTexCoord2dvARB (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord2fARB (GLenum target, GLfloat s, GLfloat t);
+GLAPI void APIENTRY glMultiTexCoord2fvARB (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord2iARB (GLenum target, GLint s, GLint t);
+GLAPI void APIENTRY glMultiTexCoord2ivARB (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord2sARB (GLenum target, GLshort s, GLshort t);
+GLAPI void APIENTRY glMultiTexCoord2svARB (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glMultiTexCoord3dARB (GLenum target, GLdouble s, GLdouble t, GLdouble r);
+GLAPI void APIENTRY glMultiTexCoord3dvARB (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord3fARB (GLenum target, GLfloat s, GLfloat t, GLfloat r);
+GLAPI void APIENTRY glMultiTexCoord3fvARB (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord3iARB (GLenum target, GLint s, GLint t, GLint r);
+GLAPI void APIENTRY glMultiTexCoord3ivARB (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord3sARB (GLenum target, GLshort s, GLshort t, GLshort r);
+GLAPI void APIENTRY glMultiTexCoord3svARB (GLenum target, const GLshort *v);
+GLAPI void APIENTRY glMultiTexCoord4dARB (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
+GLAPI void APIENTRY glMultiTexCoord4dvARB (GLenum target, const GLdouble *v);
+GLAPI void APIENTRY glMultiTexCoord4fARB (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
+GLAPI void APIENTRY glMultiTexCoord4fvARB (GLenum target, const GLfloat *v);
+GLAPI void APIENTRY glMultiTexCoord4iARB (GLenum target, GLint s, GLint t, GLint r, GLint q);
+GLAPI void APIENTRY glMultiTexCoord4ivARB (GLenum target, const GLint *v);
+GLAPI void APIENTRY glMultiTexCoord4sARB (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
+GLAPI void APIENTRY glMultiTexCoord4svARB (GLenum target, const GLshort *v);
 #endif
+#endif /* GL_ARB_multitexture */
 
-#ifndef GL_SGIX_ir_instrument1
-#define GL_IR_INSTRUMENT1_SGIX            0x817F
+#ifndef GL_ARB_occlusion_query
+#define GL_ARB_occlusion_query 1
+#define GL_QUERY_COUNTER_BITS_ARB         0x8864
+#define GL_CURRENT_QUERY_ARB              0x8865
+#define GL_QUERY_RESULT_ARB               0x8866
+#define GL_QUERY_RESULT_AVAILABLE_ARB     0x8867
+#define GL_SAMPLES_PASSED_ARB             0x8914
+typedef void (APIENTRYP PFNGLGENQUERIESARBPROC) (GLsizei n, GLuint *ids);
+typedef void (APIENTRYP PFNGLDELETEQUERIESARBPROC) (GLsizei n, const GLuint *ids);
+typedef GLboolean (APIENTRYP PFNGLISQUERYARBPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLBEGINQUERYARBPROC) (GLenum target, GLuint id);
+typedef void (APIENTRYP PFNGLENDQUERYARBPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLGETQUERYIVARBPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTIVARBPROC) (GLuint id, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTUIVARBPROC) (GLuint id, GLenum pname, GLuint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGenQueriesARB (GLsizei n, GLuint *ids);
+GLAPI void APIENTRY glDeleteQueriesARB (GLsizei n, const GLuint *ids);
+GLAPI GLboolean APIENTRY glIsQueryARB (GLuint id);
+GLAPI void APIENTRY glBeginQueryARB (GLenum target, GLuint id);
+GLAPI void APIENTRY glEndQueryARB (GLenum target);
+GLAPI void APIENTRY glGetQueryivARB (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetQueryObjectivARB (GLuint id, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetQueryObjectuivARB (GLuint id, GLenum pname, GLuint *params);
 #endif
+#endif /* GL_ARB_occlusion_query */
 
-#ifndef GL_SGIX_calligraphic_fragment
-#define GL_CALLIGRAPHIC_FRAGMENT_SGIX     0x8183
-#endif
+#ifndef GL_ARB_occlusion_query2
+#define GL_ARB_occlusion_query2 1
+#endif /* GL_ARB_occlusion_query2 */
+
+#ifndef GL_ARB_pipeline_statistics_query
+#define GL_ARB_pipeline_statistics_query 1
+#define GL_VERTICES_SUBMITTED_ARB         0x82EE
+#define GL_PRIMITIVES_SUBMITTED_ARB       0x82EF
+#define GL_VERTEX_SHADER_INVOCATIONS_ARB  0x82F0
+#define GL_TESS_CONTROL_SHADER_PATCHES_ARB 0x82F1
+#define GL_TESS_EVALUATION_SHADER_INVOCATIONS_ARB 0x82F2
+#define GL_GEOMETRY_SHADER_PRIMITIVES_EMITTED_ARB 0x82F3
+#define GL_FRAGMENT_SHADER_INVOCATIONS_ARB 0x82F4
+#define GL_COMPUTE_SHADER_INVOCATIONS_ARB 0x82F5
+#define GL_CLIPPING_INPUT_PRIMITIVES_ARB  0x82F6
+#define GL_CLIPPING_OUTPUT_PRIMITIVES_ARB 0x82F7
+#endif /* GL_ARB_pipeline_statistics_query */
 
-#ifndef GL_SGIX_texture_lod_bias
-#define GL_TEXTURE_LOD_BIAS_S_SGIX        0x818E
-#define GL_TEXTURE_LOD_BIAS_T_SGIX        0x818F
-#define GL_TEXTURE_LOD_BIAS_R_SGIX        0x8190
-#endif
+#ifndef GL_ARB_pixel_buffer_object
+#define GL_ARB_pixel_buffer_object 1
+#define GL_PIXEL_PACK_BUFFER_ARB          0x88EB
+#define GL_PIXEL_UNPACK_BUFFER_ARB        0x88EC
+#define GL_PIXEL_PACK_BUFFER_BINDING_ARB  0x88ED
+#define GL_PIXEL_UNPACK_BUFFER_BINDING_ARB 0x88EF
+#endif /* GL_ARB_pixel_buffer_object */
 
-#ifndef GL_SGIX_shadow_ambient
-#define GL_SHADOW_AMBIENT_SGIX            0x80BF
+#ifndef GL_ARB_point_parameters
+#define GL_ARB_point_parameters 1
+#define GL_POINT_SIZE_MIN_ARB             0x8126
+#define GL_POINT_SIZE_MAX_ARB             0x8127
+#define GL_POINT_FADE_THRESHOLD_SIZE_ARB  0x8128
+#define GL_POINT_DISTANCE_ATTENUATION_ARB 0x8129
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFARBPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFVARBPROC) (GLenum pname, const GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glPointParameterfARB (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glPointParameterfvARB (GLenum pname, const GLfloat *params);
 #endif
+#endif /* GL_ARB_point_parameters */
 
-#ifndef GL_EXT_index_texture
-#endif
+#ifndef GL_ARB_point_sprite
+#define GL_ARB_point_sprite 1
+#define GL_POINT_SPRITE_ARB               0x8861
+#define GL_COORD_REPLACE_ARB              0x8862
+#endif /* GL_ARB_point_sprite */
 
-#ifndef GL_EXT_index_material
-#define GL_INDEX_MATERIAL_EXT             0x81B8
-#define GL_INDEX_MATERIAL_PARAMETER_EXT   0x81B9
-#define GL_INDEX_MATERIAL_FACE_EXT        0x81BA
-#endif
+#ifndef GL_ARB_program_interface_query
+#define GL_ARB_program_interface_query 1
+#endif /* GL_ARB_program_interface_query */
 
-#ifndef GL_EXT_index_func
-#define GL_INDEX_TEST_EXT                 0x81B5
-#define GL_INDEX_TEST_FUNC_EXT            0x81B6
-#define GL_INDEX_TEST_REF_EXT             0x81B7
-#endif
+#ifndef GL_ARB_provoking_vertex
+#define GL_ARB_provoking_vertex 1
+#endif /* GL_ARB_provoking_vertex */
 
-#ifndef GL_EXT_index_array_formats
-#define GL_IUI_V2F_EXT                    0x81AD
-#define GL_IUI_V3F_EXT                    0x81AE
-#define GL_IUI_N3F_V2F_EXT                0x81AF
-#define GL_IUI_N3F_V3F_EXT                0x81B0
-#define GL_T2F_IUI_V2F_EXT                0x81B1
-#define GL_T2F_IUI_V3F_EXT                0x81B2
-#define GL_T2F_IUI_N3F_V2F_EXT            0x81B3
-#define GL_T2F_IUI_N3F_V3F_EXT            0x81B4
-#endif
+#ifndef GL_ARB_query_buffer_object
+#define GL_ARB_query_buffer_object 1
+#endif /* GL_ARB_query_buffer_object */
 
-#ifndef GL_EXT_compiled_vertex_array
-#define GL_ARRAY_ELEMENT_LOCK_FIRST_EXT   0x81A8
-#define GL_ARRAY_ELEMENT_LOCK_COUNT_EXT   0x81A9
-#endif
+#ifndef GL_ARB_robust_buffer_access_behavior
+#define GL_ARB_robust_buffer_access_behavior 1
+#endif /* GL_ARB_robust_buffer_access_behavior */
 
-#ifndef GL_EXT_cull_vertex
-#define GL_CULL_VERTEX_EXT                0x81AA
-#define GL_CULL_VERTEX_EYE_POSITION_EXT   0x81AB
-#define GL_CULL_VERTEX_OBJECT_POSITION_EXT 0x81AC
+#ifndef GL_ARB_robustness
+#define GL_ARB_robustness 1
+#define GL_CONTEXT_FLAG_ROBUST_ACCESS_BIT_ARB 0x00000004
+#define GL_LOSE_CONTEXT_ON_RESET_ARB      0x8252
+#define GL_GUILTY_CONTEXT_RESET_ARB       0x8253
+#define GL_INNOCENT_CONTEXT_RESET_ARB     0x8254
+#define GL_UNKNOWN_CONTEXT_RESET_ARB      0x8255
+#define GL_RESET_NOTIFICATION_STRATEGY_ARB 0x8256
+#define GL_NO_RESET_NOTIFICATION_ARB      0x8261
+typedef GLenum (APIENTRYP PFNGLGETGRAPHICSRESETSTATUSARBPROC) (void);
+typedef void (APIENTRYP PFNGLGETNTEXIMAGEARBPROC) (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, void *img);
+typedef void (APIENTRYP PFNGLREADNPIXELSARBPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+typedef void (APIENTRYP PFNGLGETNCOMPRESSEDTEXIMAGEARBPROC) (GLenum target, GLint lod, GLsizei bufSize, void *img);
+typedef void (APIENTRYP PFNGLGETNUNIFORMFVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETNUNIFORMIVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params);
+typedef void (APIENTRYP PFNGLGETNUNIFORMUIVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
+typedef void (APIENTRYP PFNGLGETNUNIFORMDVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETNMAPDVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v);
+typedef void (APIENTRYP PFNGLGETNMAPFVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v);
+typedef void (APIENTRYP PFNGLGETNMAPIVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLint *v);
+typedef void (APIENTRYP PFNGLGETNPIXELMAPFVARBPROC) (GLenum map, GLsizei bufSize, GLfloat *values);
+typedef void (APIENTRYP PFNGLGETNPIXELMAPUIVARBPROC) (GLenum map, GLsizei bufSize, GLuint *values);
+typedef void (APIENTRYP PFNGLGETNPIXELMAPUSVARBPROC) (GLenum map, GLsizei bufSize, GLushort *values);
+typedef void (APIENTRYP PFNGLGETNPOLYGONSTIPPLEARBPROC) (GLsizei bufSize, GLubyte *pattern);
+typedef void (APIENTRYP PFNGLGETNCOLORTABLEARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *table);
+typedef void (APIENTRYP PFNGLGETNCONVOLUTIONFILTERARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *image);
+typedef void (APIENTRYP PFNGLGETNSEPARABLEFILTERARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, void *row, GLsizei columnBufSize, void *column, void *span);
+typedef void (APIENTRYP PFNGLGETNHISTOGRAMARBPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+typedef void (APIENTRYP PFNGLGETNMINMAXARBPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLenum APIENTRY glGetGraphicsResetStatusARB (void);
+GLAPI void APIENTRY glGetnTexImageARB (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, void *img);
+GLAPI void APIENTRY glReadnPixelsARB (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, void *data);
+GLAPI void APIENTRY glGetnCompressedTexImageARB (GLenum target, GLint lod, GLsizei bufSize, void *img);
+GLAPI void APIENTRY glGetnUniformfvARB (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
+GLAPI void APIENTRY glGetnUniformivARB (GLuint program, GLint location, GLsizei bufSize, GLint *params);
+GLAPI void APIENTRY glGetnUniformuivARB (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
+GLAPI void APIENTRY glGetnUniformdvARB (GLuint program, GLint location, GLsizei bufSize, GLdouble *params);
+GLAPI void APIENTRY glGetnMapdvARB (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v);
+GLAPI void APIENTRY glGetnMapfvARB (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v);
+GLAPI void APIENTRY glGetnMapivARB (GLenum target, GLenum query, GLsizei bufSize, GLint *v);
+GLAPI void APIENTRY glGetnPixelMapfvARB (GLenum map, GLsizei bufSize, GLfloat *values);
+GLAPI void APIENTRY glGetnPixelMapuivARB (GLenum map, GLsizei bufSize, GLuint *values);
+GLAPI void APIENTRY glGetnPixelMapusvARB (GLenum map, GLsizei bufSize, GLushort *values);
+GLAPI void APIENTRY glGetnPolygonStippleARB (GLsizei bufSize, GLubyte *pattern);
+GLAPI void APIENTRY glGetnColorTableARB (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *table);
+GLAPI void APIENTRY glGetnConvolutionFilterARB (GLenum target, GLenum format, GLenum type, GLsizei bufSize, void *image);
+GLAPI void APIENTRY glGetnSeparableFilterARB (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, void *row, GLsizei columnBufSize, void *column, void *span);
+GLAPI void APIENTRY glGetnHistogramARB (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
+GLAPI void APIENTRY glGetnMinmaxARB (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, void *values);
 #endif
+#endif /* GL_ARB_robustness */
 
-#ifndef GL_SGIX_ycrcb
-#define GL_YCRCB_422_SGIX                 0x81BB
-#define GL_YCRCB_444_SGIX                 0x81BC
-#endif
+#ifndef GL_ARB_robustness_isolation
+#define GL_ARB_robustness_isolation 1
+#endif /* GL_ARB_robustness_isolation */
 
-#ifndef GL_SGIX_fragment_lighting
-#define GL_FRAGMENT_LIGHTING_SGIX         0x8400
-#define GL_FRAGMENT_COLOR_MATERIAL_SGIX   0x8401
-#define GL_FRAGMENT_COLOR_MATERIAL_FACE_SGIX 0x8402
-#define GL_FRAGMENT_COLOR_MATERIAL_PARAMETER_SGIX 0x8403
-#define GL_MAX_FRAGMENT_LIGHTS_SGIX       0x8404
-#define GL_MAX_ACTIVE_LIGHTS_SGIX         0x8405
-#define GL_CURRENT_RASTER_NORMAL_SGIX     0x8406
-#define GL_LIGHT_ENV_MODE_SGIX            0x8407
-#define GL_FRAGMENT_LIGHT_MODEL_LOCAL_VIEWER_SGIX 0x8408
-#define GL_FRAGMENT_LIGHT_MODEL_TWO_SIDE_SGIX 0x8409
-#define GL_FRAGMENT_LIGHT_MODEL_AMBIENT_SGIX 0x840A
-#define GL_FRAGMENT_LIGHT_MODEL_NORMAL_INTERPOLATION_SGIX 0x840B
-#define GL_FRAGMENT_LIGHT0_SGIX           0x840C
-#define GL_FRAGMENT_LIGHT1_SGIX           0x840D
-#define GL_FRAGMENT_LIGHT2_SGIX           0x840E
-#define GL_FRAGMENT_LIGHT3_SGIX           0x840F
-#define GL_FRAGMENT_LIGHT4_SGIX           0x8410
-#define GL_FRAGMENT_LIGHT5_SGIX           0x8411
-#define GL_FRAGMENT_LIGHT6_SGIX           0x8412
-#define GL_FRAGMENT_LIGHT7_SGIX           0x8413
+#ifndef GL_ARB_sample_shading
+#define GL_ARB_sample_shading 1
+#define GL_SAMPLE_SHADING_ARB             0x8C36
+#define GL_MIN_SAMPLE_SHADING_VALUE_ARB   0x8C37
+typedef void (APIENTRYP PFNGLMINSAMPLESHADINGARBPROC) (GLfloat value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMinSampleShadingARB (GLfloat value);
 #endif
+#endif /* GL_ARB_sample_shading */
 
-#ifndef GL_IBM_rasterpos_clip
-#define GL_RASTER_POSITION_UNCLIPPED_IBM  0x19262
-#endif
+#ifndef GL_ARB_sampler_objects
+#define GL_ARB_sampler_objects 1
+#endif /* GL_ARB_sampler_objects */
 
-#ifndef GL_HP_texture_lighting
-#define GL_TEXTURE_LIGHTING_MODE_HP       0x8167
-#define GL_TEXTURE_POST_SPECULAR_HP       0x8168
-#define GL_TEXTURE_PRE_SPECULAR_HP        0x8169
-#endif
+#ifndef GL_ARB_seamless_cube_map
+#define GL_ARB_seamless_cube_map 1
+#endif /* GL_ARB_seamless_cube_map */
 
-#ifndef GL_EXT_draw_range_elements
-#define GL_MAX_ELEMENTS_VERTICES_EXT      0x80E8
-#define GL_MAX_ELEMENTS_INDICES_EXT       0x80E9
-#endif
+#ifndef GL_ARB_seamless_cubemap_per_texture
+#define GL_ARB_seamless_cubemap_per_texture 1
+#endif /* GL_ARB_seamless_cubemap_per_texture */
 
-#ifndef GL_WIN_phong_shading
-#define GL_PHONG_WIN                      0x80EA
-#define GL_PHONG_HINT_WIN                 0x80EB
-#endif
+#ifndef GL_ARB_separate_shader_objects
+#define GL_ARB_separate_shader_objects 1
+#endif /* GL_ARB_separate_shader_objects */
 
-#ifndef GL_WIN_specular_fog
-#define GL_FOG_SPECULAR_TEXTURE_WIN       0x80EC
-#endif
+#ifndef GL_ARB_shader_atomic_counters
+#define GL_ARB_shader_atomic_counters 1
+#endif /* GL_ARB_shader_atomic_counters */
 
-#ifndef GL_EXT_light_texture
-#define GL_FRAGMENT_MATERIAL_EXT          0x8349
-#define GL_FRAGMENT_NORMAL_EXT            0x834A
-#define GL_FRAGMENT_COLOR_EXT             0x834C
-#define GL_ATTENUATION_EXT                0x834D
-#define GL_SHADOW_ATTENUATION_EXT         0x834E
-#define GL_TEXTURE_APPLICATION_MODE_EXT   0x834F
-#define GL_TEXTURE_LIGHT_EXT              0x8350
-#define GL_TEXTURE_MATERIAL_FACE_EXT      0x8351
-#define GL_TEXTURE_MATERIAL_PARAMETER_EXT 0x8352
-/* reuse GL_FRAGMENT_DEPTH_EXT */
-#endif
+#ifndef GL_ARB_shader_bit_encoding
+#define GL_ARB_shader_bit_encoding 1
+#endif /* GL_ARB_shader_bit_encoding */
 
-#ifndef GL_SGIX_blend_alpha_minmax
-#define GL_ALPHA_MIN_SGIX                 0x8320
-#define GL_ALPHA_MAX_SGIX                 0x8321
-#endif
+#ifndef GL_ARB_shader_draw_parameters
+#define GL_ARB_shader_draw_parameters 1
+#endif /* GL_ARB_shader_draw_parameters */
 
-#ifndef GL_SGIX_impact_pixel_texture
-#define GL_PIXEL_TEX_GEN_Q_CEILING_SGIX   0x8184
-#define GL_PIXEL_TEX_GEN_Q_ROUND_SGIX     0x8185
-#define GL_PIXEL_TEX_GEN_Q_FLOOR_SGIX     0x8186
-#define GL_PIXEL_TEX_GEN_ALPHA_REPLACE_SGIX 0x8187
-#define GL_PIXEL_TEX_GEN_ALPHA_NO_REPLACE_SGIX 0x8188
-#define GL_PIXEL_TEX_GEN_ALPHA_LS_SGIX    0x8189
-#define GL_PIXEL_TEX_GEN_ALPHA_MS_SGIX    0x818A
-#endif
+#ifndef GL_ARB_shader_group_vote
+#define GL_ARB_shader_group_vote 1
+#endif /* GL_ARB_shader_group_vote */
 
-#ifndef GL_EXT_bgra
-#define GL_BGR_EXT                        0x80E0
-#define GL_BGRA_EXT                       0x80E1
-#endif
+#ifndef GL_ARB_shader_image_load_store
+#define GL_ARB_shader_image_load_store 1
+#endif /* GL_ARB_shader_image_load_store */
 
-#ifndef GL_SGIX_async
-#define GL_ASYNC_MARKER_SGIX              0x8329
-#endif
+#ifndef GL_ARB_shader_image_size
+#define GL_ARB_shader_image_size 1
+#endif /* GL_ARB_shader_image_size */
 
-#ifndef GL_SGIX_async_pixel
-#define GL_ASYNC_TEX_IMAGE_SGIX           0x835C
-#define GL_ASYNC_DRAW_PIXELS_SGIX         0x835D
-#define GL_ASYNC_READ_PIXELS_SGIX         0x835E
-#define GL_MAX_ASYNC_TEX_IMAGE_SGIX       0x835F
-#define GL_MAX_ASYNC_DRAW_PIXELS_SGIX     0x8360
-#define GL_MAX_ASYNC_READ_PIXELS_SGIX     0x8361
+#ifndef GL_ARB_shader_objects
+#define GL_ARB_shader_objects 1
+#ifdef __APPLE__
+typedef void *GLhandleARB;
+#else
+typedef unsigned int GLhandleARB;
 #endif
-
-#ifndef GL_SGIX_async_histogram
-#define GL_ASYNC_HISTOGRAM_SGIX           0x832C
-#define GL_MAX_ASYNC_HISTOGRAM_SGIX       0x832D
+typedef char GLcharARB;
+#define GL_PROGRAM_OBJECT_ARB             0x8B40
+#define GL_SHADER_OBJECT_ARB              0x8B48
+#define GL_OBJECT_TYPE_ARB                0x8B4E
+#define GL_OBJECT_SUBTYPE_ARB             0x8B4F
+#define GL_FLOAT_VEC2_ARB                 0x8B50
+#define GL_FLOAT_VEC3_ARB                 0x8B51
+#define GL_FLOAT_VEC4_ARB                 0x8B52
+#define GL_INT_VEC2_ARB                   0x8B53
+#define GL_INT_VEC3_ARB                   0x8B54
+#define GL_INT_VEC4_ARB                   0x8B55
+#define GL_BOOL_ARB                       0x8B56
+#define GL_BOOL_VEC2_ARB                  0x8B57
+#define GL_BOOL_VEC3_ARB                  0x8B58
+#define GL_BOOL_VEC4_ARB                  0x8B59
+#define GL_FLOAT_MAT2_ARB                 0x8B5A
+#define GL_FLOAT_MAT3_ARB                 0x8B5B
+#define GL_FLOAT_MAT4_ARB                 0x8B5C
+#define GL_SAMPLER_1D_ARB                 0x8B5D
+#define GL_SAMPLER_2D_ARB                 0x8B5E
+#define GL_SAMPLER_3D_ARB                 0x8B5F
+#define GL_SAMPLER_CUBE_ARB               0x8B60
+#define GL_SAMPLER_1D_SHADOW_ARB          0x8B61
+#define GL_SAMPLER_2D_SHADOW_ARB          0x8B62
+#define GL_SAMPLER_2D_RECT_ARB            0x8B63
+#define GL_SAMPLER_2D_RECT_SHADOW_ARB     0x8B64
+#define GL_OBJECT_DELETE_STATUS_ARB       0x8B80
+#define GL_OBJECT_COMPILE_STATUS_ARB      0x8B81
+#define GL_OBJECT_LINK_STATUS_ARB         0x8B82
+#define GL_OBJECT_VALIDATE_STATUS_ARB     0x8B83
+#define GL_OBJECT_INFO_LOG_LENGTH_ARB     0x8B84
+#define GL_OBJECT_ATTACHED_OBJECTS_ARB    0x8B85
+#define GL_OBJECT_ACTIVE_UNIFORMS_ARB     0x8B86
+#define GL_OBJECT_ACTIVE_UNIFORM_MAX_LENGTH_ARB 0x8B87
+#define GL_OBJECT_SHADER_SOURCE_LENGTH_ARB 0x8B88
+typedef void (APIENTRYP PFNGLDELETEOBJECTARBPROC) (GLhandleARB obj);
+typedef GLhandleARB (APIENTRYP PFNGLGETHANDLEARBPROC) (GLenum pname);
+typedef void (APIENTRYP PFNGLDETACHOBJECTARBPROC) (GLhandleARB containerObj, GLhandleARB attachedObj);
+typedef GLhandleARB (APIENTRYP PFNGLCREATESHADEROBJECTARBPROC) (GLenum shaderType);
+typedef void (APIENTRYP PFNGLSHADERSOURCEARBPROC) (GLhandleARB shaderObj, GLsizei count, const GLcharARB **string, const GLint *length);
+typedef void (APIENTRYP PFNGLCOMPILESHADERARBPROC) (GLhandleARB shaderObj);
+typedef GLhandleARB (APIENTRYP PFNGLCREATEPROGRAMOBJECTARBPROC) (void);
+typedef void (APIENTRYP PFNGLATTACHOBJECTARBPROC) (GLhandleARB containerObj, GLhandleARB obj);
+typedef void (APIENTRYP PFNGLLINKPROGRAMARBPROC) (GLhandleARB programObj);
+typedef void (APIENTRYP PFNGLUSEPROGRAMOBJECTARBPROC) (GLhandleARB programObj);
+typedef void (APIENTRYP PFNGLVALIDATEPROGRAMARBPROC) (GLhandleARB programObj);
+typedef void (APIENTRYP PFNGLUNIFORM1FARBPROC) (GLint location, GLfloat v0);
+typedef void (APIENTRYP PFNGLUNIFORM2FARBPROC) (GLint location, GLfloat v0, GLfloat v1);
+typedef void (APIENTRYP PFNGLUNIFORM3FARBPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+typedef void (APIENTRYP PFNGLUNIFORM4FARBPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+typedef void (APIENTRYP PFNGLUNIFORM1IARBPROC) (GLint location, GLint v0);
+typedef void (APIENTRYP PFNGLUNIFORM2IARBPROC) (GLint location, GLint v0, GLint v1);
+typedef void (APIENTRYP PFNGLUNIFORM3IARBPROC) (GLint location, GLint v0, GLint v1, GLint v2);
+typedef void (APIENTRYP PFNGLUNIFORM4IARBPROC) (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+typedef void (APIENTRYP PFNGLUNIFORM1FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM2FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM3FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM4FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORM1IVARBPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORM2IVARBPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORM3IVARBPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORM4IVARBPROC) (GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX2FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX3FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLUNIFORMMATRIX4FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERFVARBPROC) (GLhandleARB obj, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERIVARBPROC) (GLhandleARB obj, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETINFOLOGARBPROC) (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *infoLog);
+typedef void (APIENTRYP PFNGLGETATTACHEDOBJECTSARBPROC) (GLhandleARB containerObj, GLsizei maxCount, GLsizei *count, GLhandleARB *obj);
+typedef GLint (APIENTRYP PFNGLGETUNIFORMLOCATIONARBPROC) (GLhandleARB programObj, const GLcharARB *name);
+typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMARBPROC) (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
+typedef void (APIENTRYP PFNGLGETUNIFORMFVARBPROC) (GLhandleARB programObj, GLint location, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETUNIFORMIVARBPROC) (GLhandleARB programObj, GLint location, GLint *params);
+typedef void (APIENTRYP PFNGLGETSHADERSOURCEARBPROC) (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *source);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDeleteObjectARB (GLhandleARB obj);
+GLAPI GLhandleARB APIENTRY glGetHandleARB (GLenum pname);
+GLAPI void APIENTRY glDetachObjectARB (GLhandleARB containerObj, GLhandleARB attachedObj);
+GLAPI GLhandleARB APIENTRY glCreateShaderObjectARB (GLenum shaderType);
+GLAPI void APIENTRY glShaderSourceARB (GLhandleARB shaderObj, GLsizei count, const GLcharARB **string, const GLint *length);
+GLAPI void APIENTRY glCompileShaderARB (GLhandleARB shaderObj);
+GLAPI GLhandleARB APIENTRY glCreateProgramObjectARB (void);
+GLAPI void APIENTRY glAttachObjectARB (GLhandleARB containerObj, GLhandleARB obj);
+GLAPI void APIENTRY glLinkProgramARB (GLhandleARB programObj);
+GLAPI void APIENTRY glUseProgramObjectARB (GLhandleARB programObj);
+GLAPI void APIENTRY glValidateProgramARB (GLhandleARB programObj);
+GLAPI void APIENTRY glUniform1fARB (GLint location, GLfloat v0);
+GLAPI void APIENTRY glUniform2fARB (GLint location, GLfloat v0, GLfloat v1);
+GLAPI void APIENTRY glUniform3fARB (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+GLAPI void APIENTRY glUniform4fARB (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+GLAPI void APIENTRY glUniform1iARB (GLint location, GLint v0);
+GLAPI void APIENTRY glUniform2iARB (GLint location, GLint v0, GLint v1);
+GLAPI void APIENTRY glUniform3iARB (GLint location, GLint v0, GLint v1, GLint v2);
+GLAPI void APIENTRY glUniform4iARB (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+GLAPI void APIENTRY glUniform1fvARB (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform2fvARB (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform3fvARB (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform4fvARB (GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glUniform1ivARB (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniform2ivARB (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniform3ivARB (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniform4ivARB (GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glUniformMatrix2fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix3fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glUniformMatrix4fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glGetObjectParameterfvARB (GLhandleARB obj, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetObjectParameterivARB (GLhandleARB obj, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetInfoLogARB (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *infoLog);
+GLAPI void APIENTRY glGetAttachedObjectsARB (GLhandleARB containerObj, GLsizei maxCount, GLsizei *count, GLhandleARB *obj);
+GLAPI GLint APIENTRY glGetUniformLocationARB (GLhandleARB programObj, const GLcharARB *name);
+GLAPI void APIENTRY glGetActiveUniformARB (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
+GLAPI void APIENTRY glGetUniformfvARB (GLhandleARB programObj, GLint location, GLfloat *params);
+GLAPI void APIENTRY glGetUniformivARB (GLhandleARB programObj, GLint location, GLint *params);
+GLAPI void APIENTRY glGetShaderSourceARB (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *source);
 #endif
+#endif /* GL_ARB_shader_objects */
 
-#ifndef GL_INTEL_texture_scissor
-#endif
+#ifndef GL_ARB_shader_precision
+#define GL_ARB_shader_precision 1
+#endif /* GL_ARB_shader_precision */
 
-#ifndef GL_INTEL_parallel_arrays
-#define GL_PARALLEL_ARRAYS_INTEL          0x83F4
-#define GL_VERTEX_ARRAY_PARALLEL_POINTERS_INTEL 0x83F5
-#define GL_NORMAL_ARRAY_PARALLEL_POINTERS_INTEL 0x83F6
-#define GL_COLOR_ARRAY_PARALLEL_POINTERS_INTEL 0x83F7
-#define GL_TEXTURE_COORD_ARRAY_PARALLEL_POINTERS_INTEL 0x83F8
-#endif
+#ifndef GL_ARB_shader_stencil_export
+#define GL_ARB_shader_stencil_export 1
+#endif /* GL_ARB_shader_stencil_export */
 
-#ifndef GL_HP_occlusion_test
-#define GL_OCCLUSION_TEST_HP              0x8165
-#define GL_OCCLUSION_TEST_RESULT_HP       0x8166
-#endif
+#ifndef GL_ARB_shader_storage_buffer_object
+#define GL_ARB_shader_storage_buffer_object 1
+#endif /* GL_ARB_shader_storage_buffer_object */
 
-#ifndef GL_EXT_pixel_transform
-#define GL_PIXEL_TRANSFORM_2D_EXT         0x8330
-#define GL_PIXEL_MAG_FILTER_EXT           0x8331
-#define GL_PIXEL_MIN_FILTER_EXT           0x8332
-#define GL_PIXEL_CUBIC_WEIGHT_EXT         0x8333
-#define GL_CUBIC_EXT                      0x8334
-#define GL_AVERAGE_EXT                    0x8335
-#define GL_PIXEL_TRANSFORM_2D_STACK_DEPTH_EXT 0x8336
-#define GL_MAX_PIXEL_TRANSFORM_2D_STACK_DEPTH_EXT 0x8337
-#define GL_PIXEL_TRANSFORM_2D_MATRIX_EXT  0x8338
-#endif
+#ifndef GL_ARB_shader_subroutine
+#define GL_ARB_shader_subroutine 1
+#endif /* GL_ARB_shader_subroutine */
 
-#ifndef GL_EXT_pixel_transform_color_table
-#endif
+#ifndef GL_ARB_shader_texture_image_samples
+#define GL_ARB_shader_texture_image_samples 1
+#endif /* GL_ARB_shader_texture_image_samples */
 
-#ifndef GL_EXT_shared_texture_palette
-#define GL_SHARED_TEXTURE_PALETTE_EXT     0x81FB
-#endif
+#ifndef GL_ARB_shader_texture_lod
+#define GL_ARB_shader_texture_lod 1
+#endif /* GL_ARB_shader_texture_lod */
 
-#ifndef GL_EXT_separate_specular_color
-#define GL_LIGHT_MODEL_COLOR_CONTROL_EXT  0x81F8
-#define GL_SINGLE_COLOR_EXT               0x81F9
-#define GL_SEPARATE_SPECULAR_COLOR_EXT    0x81FA
-#endif
+#ifndef GL_ARB_shading_language_100
+#define GL_ARB_shading_language_100 1
+#define GL_SHADING_LANGUAGE_VERSION_ARB   0x8B8C
+#endif /* GL_ARB_shading_language_100 */
 
-#ifndef GL_EXT_secondary_color
-#define GL_COLOR_SUM_EXT                  0x8458
-#define GL_CURRENT_SECONDARY_COLOR_EXT    0x8459
-#define GL_SECONDARY_COLOR_ARRAY_SIZE_EXT 0x845A
-#define GL_SECONDARY_COLOR_ARRAY_TYPE_EXT 0x845B
-#define GL_SECONDARY_COLOR_ARRAY_STRIDE_EXT 0x845C
-#define GL_SECONDARY_COLOR_ARRAY_POINTER_EXT 0x845D
-#define GL_SECONDARY_COLOR_ARRAY_EXT      0x845E
-#endif
+#ifndef GL_ARB_shading_language_420pack
+#define GL_ARB_shading_language_420pack 1
+#endif /* GL_ARB_shading_language_420pack */
 
-#ifndef GL_EXT_texture_perturb_normal
-#define GL_PERTURB_EXT                    0x85AE
-#define GL_TEXTURE_NORMAL_EXT             0x85AF
+#ifndef GL_ARB_shading_language_include
+#define GL_ARB_shading_language_include 1
+#define GL_SHADER_INCLUDE_ARB             0x8DAE
+#define GL_NAMED_STRING_LENGTH_ARB        0x8DE9
+#define GL_NAMED_STRING_TYPE_ARB          0x8DEA
+typedef void (APIENTRYP PFNGLNAMEDSTRINGARBPROC) (GLenum type, GLint namelen, const GLchar *name, GLint stringlen, const GLchar *string);
+typedef void (APIENTRYP PFNGLDELETENAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name);
+typedef void (APIENTRYP PFNGLCOMPILESHADERINCLUDEARBPROC) (GLuint shader, GLsizei count, const GLchar *const*path, const GLint *length);
+typedef GLboolean (APIENTRYP PFNGLISNAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name);
+typedef void (APIENTRYP PFNGLGETNAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name, GLsizei bufSize, GLint *stringlen, GLchar *string);
+typedef void (APIENTRYP PFNGLGETNAMEDSTRINGIVARBPROC) (GLint namelen, const GLchar *name, GLenum pname, GLint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glNamedStringARB (GLenum type, GLint namelen, const GLchar *name, GLint stringlen, const GLchar *string);
+GLAPI void APIENTRY glDeleteNamedStringARB (GLint namelen, const GLchar *name);
+GLAPI void APIENTRY glCompileShaderIncludeARB (GLuint shader, GLsizei count, const GLchar *const*path, const GLint *length);
+GLAPI GLboolean APIENTRY glIsNamedStringARB (GLint namelen, const GLchar *name);
+GLAPI void APIENTRY glGetNamedStringARB (GLint namelen, const GLchar *name, GLsizei bufSize, GLint *stringlen, GLchar *string);
+GLAPI void APIENTRY glGetNamedStringivARB (GLint namelen, const GLchar *name, GLenum pname, GLint *params);
 #endif
+#endif /* GL_ARB_shading_language_include */
 
-#ifndef GL_EXT_multi_draw_arrays
-#endif
+#ifndef GL_ARB_shading_language_packing
+#define GL_ARB_shading_language_packing 1
+#endif /* GL_ARB_shading_language_packing */
 
-#ifndef GL_EXT_fog_coord
-#define GL_FOG_COORDINATE_SOURCE_EXT      0x8450
-#define GL_FOG_COORDINATE_EXT             0x8451
-#define GL_FRAGMENT_DEPTH_EXT             0x8452
-#define GL_CURRENT_FOG_COORDINATE_EXT     0x8453
-#define GL_FOG_COORDINATE_ARRAY_TYPE_EXT  0x8454
-#define GL_FOG_COORDINATE_ARRAY_STRIDE_EXT 0x8455
-#define GL_FOG_COORDINATE_ARRAY_POINTER_EXT 0x8456
-#define GL_FOG_COORDINATE_ARRAY_EXT       0x8457
-#endif
+#ifndef GL_ARB_shadow
+#define GL_ARB_shadow 1
+#define GL_TEXTURE_COMPARE_MODE_ARB       0x884C
+#define GL_TEXTURE_COMPARE_FUNC_ARB       0x884D
+#define GL_COMPARE_R_TO_TEXTURE_ARB       0x884E
+#endif /* GL_ARB_shadow */
 
-#ifndef GL_REND_screen_coordinates
-#define GL_SCREEN_COORDINATES_REND        0x8490
-#define GL_INVERTED_SCREEN_W_REND         0x8491
-#endif
+#ifndef GL_ARB_shadow_ambient
+#define GL_ARB_shadow_ambient 1
+#define GL_TEXTURE_COMPARE_FAIL_VALUE_ARB 0x80BF
+#endif /* GL_ARB_shadow_ambient */
+
+#ifndef GL_ARB_sparse_buffer
+#define GL_ARB_sparse_buffer 1
+#define GL_SPARSE_STORAGE_BIT_ARB         0x0400
+#define GL_SPARSE_BUFFER_PAGE_SIZE_ARB    0x82F8
+typedef void (APIENTRYP PFNGLBUFFERPAGECOMMITMENTARBPROC) (GLenum target, GLintptr offset, GLsizei size, GLboolean commit);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERPAGECOMMITMENTEXTPROC) (GLuint buffer, GLintptr offset, GLsizei size, GLboolean commit);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERPAGECOMMITMENTARBPROC) (GLuint buffer, GLintptr offset, GLsizei size, GLboolean commit);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBufferPageCommitmentARB (GLenum target, GLintptr offset, GLsizei size, GLboolean commit);
+GLAPI void APIENTRY glNamedBufferPageCommitmentEXT (GLuint buffer, GLintptr offset, GLsizei size, GLboolean commit);
+GLAPI void APIENTRY glNamedBufferPageCommitmentARB (GLuint buffer, GLintptr offset, GLsizei size, GLboolean commit);
+#endif
+#endif /* GL_ARB_sparse_buffer */
+
+#ifndef GL_ARB_sparse_texture
+#define GL_ARB_sparse_texture 1
+#define GL_TEXTURE_SPARSE_ARB             0x91A6
+#define GL_VIRTUAL_PAGE_SIZE_INDEX_ARB    0x91A7
+#define GL_MIN_SPARSE_LEVEL_ARB           0x919B
+#define GL_NUM_VIRTUAL_PAGE_SIZES_ARB     0x91A8
+#define GL_VIRTUAL_PAGE_SIZE_X_ARB        0x9195
+#define GL_VIRTUAL_PAGE_SIZE_Y_ARB        0x9196
+#define GL_VIRTUAL_PAGE_SIZE_Z_ARB        0x9197
+#define GL_MAX_SPARSE_TEXTURE_SIZE_ARB    0x9198
+#define GL_MAX_SPARSE_3D_TEXTURE_SIZE_ARB 0x9199
+#define GL_MAX_SPARSE_ARRAY_TEXTURE_LAYERS_ARB 0x919A
+#define GL_SPARSE_TEXTURE_FULL_ARRAY_CUBE_MIPMAPS_ARB 0x91A9
+typedef void (APIENTRYP PFNGLTEXPAGECOMMITMENTARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLboolean resident);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexPageCommitmentARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLboolean resident);
+#endif
+#endif /* GL_ARB_sparse_texture */
 
-#ifndef GL_EXT_coordinate_frame
-#define GL_TANGENT_ARRAY_EXT              0x8439
-#define GL_BINORMAL_ARRAY_EXT             0x843A
-#define GL_CURRENT_TANGENT_EXT            0x843B
-#define GL_CURRENT_BINORMAL_EXT           0x843C
-#define GL_TANGENT_ARRAY_TYPE_EXT         0x843E
-#define GL_TANGENT_ARRAY_STRIDE_EXT       0x843F
-#define GL_BINORMAL_ARRAY_TYPE_EXT        0x8440
-#define GL_BINORMAL_ARRAY_STRIDE_EXT      0x8441
-#define GL_TANGENT_ARRAY_POINTER_EXT      0x8442
-#define GL_BINORMAL_ARRAY_POINTER_EXT     0x8443
-#define GL_MAP1_TANGENT_EXT               0x8444
-#define GL_MAP2_TANGENT_EXT               0x8445
-#define GL_MAP1_BINORMAL_EXT              0x8446
-#define GL_MAP2_BINORMAL_EXT              0x8447
-#endif
+#ifndef GL_ARB_stencil_texturing
+#define GL_ARB_stencil_texturing 1
+#endif /* GL_ARB_stencil_texturing */
 
-#ifndef GL_EXT_texture_env_combine
-#define GL_COMBINE_EXT                    0x8570
-#define GL_COMBINE_RGB_EXT                0x8571
-#define GL_COMBINE_ALPHA_EXT              0x8572
-#define GL_RGB_SCALE_EXT                  0x8573
-#define GL_ADD_SIGNED_EXT                 0x8574
-#define GL_INTERPOLATE_EXT                0x8575
-#define GL_CONSTANT_EXT                   0x8576
-#define GL_PRIMARY_COLOR_EXT              0x8577
-#define GL_PREVIOUS_EXT                   0x8578
-#define GL_SOURCE0_RGB_EXT                0x8580
-#define GL_SOURCE1_RGB_EXT                0x8581
-#define GL_SOURCE2_RGB_EXT                0x8582
-#define GL_SOURCE0_ALPHA_EXT              0x8588
-#define GL_SOURCE1_ALPHA_EXT              0x8589
-#define GL_SOURCE2_ALPHA_EXT              0x858A
-#define GL_OPERAND0_RGB_EXT               0x8590
-#define GL_OPERAND1_RGB_EXT               0x8591
-#define GL_OPERAND2_RGB_EXT               0x8592
-#define GL_OPERAND0_ALPHA_EXT             0x8598
-#define GL_OPERAND1_ALPHA_EXT             0x8599
-#define GL_OPERAND2_ALPHA_EXT             0x859A
-#endif
+#ifndef GL_ARB_sync
+#define GL_ARB_sync 1
+#endif /* GL_ARB_sync */
 
-#ifndef GL_APPLE_specular_vector
-#define GL_LIGHT_MODEL_SPECULAR_VECTOR_APPLE 0x85B0
-#endif
+#ifndef GL_ARB_tessellation_shader
+#define GL_ARB_tessellation_shader 1
+#endif /* GL_ARB_tessellation_shader */
 
-#ifndef GL_APPLE_transform_hint
-#define GL_TRANSFORM_HINT_APPLE           0x85B1
-#endif
+#ifndef GL_ARB_texture_barrier
+#define GL_ARB_texture_barrier 1
+#endif /* GL_ARB_texture_barrier */
 
-#ifndef GL_SGIX_fog_scale
-#define GL_FOG_SCALE_SGIX                 0x81FC
-#define GL_FOG_SCALE_VALUE_SGIX           0x81FD
-#endif
+#ifndef GL_ARB_texture_border_clamp
+#define GL_ARB_texture_border_clamp 1
+#define GL_CLAMP_TO_BORDER_ARB            0x812D
+#endif /* GL_ARB_texture_border_clamp */
 
-#ifndef GL_SUNX_constant_data
-#define GL_UNPACK_CONSTANT_DATA_SUNX      0x81D5
-#define GL_TEXTURE_CONSTANT_DATA_SUNX     0x81D6
+#ifndef GL_ARB_texture_buffer_object
+#define GL_ARB_texture_buffer_object 1
+#define GL_TEXTURE_BUFFER_ARB             0x8C2A
+#define GL_MAX_TEXTURE_BUFFER_SIZE_ARB    0x8C2B
+#define GL_TEXTURE_BINDING_BUFFER_ARB     0x8C2C
+#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING_ARB 0x8C2D
+#define GL_TEXTURE_BUFFER_FORMAT_ARB      0x8C2E
+typedef void (APIENTRYP PFNGLTEXBUFFERARBPROC) (GLenum target, GLenum internalformat, GLuint buffer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexBufferARB (GLenum target, GLenum internalformat, GLuint buffer);
 #endif
+#endif /* GL_ARB_texture_buffer_object */
 
-#ifndef GL_SUN_global_alpha
-#define GL_GLOBAL_ALPHA_SUN               0x81D9
-#define GL_GLOBAL_ALPHA_FACTOR_SUN        0x81DA
-#endif
+#ifndef GL_ARB_texture_buffer_object_rgb32
+#define GL_ARB_texture_buffer_object_rgb32 1
+#endif /* GL_ARB_texture_buffer_object_rgb32 */
 
-#ifndef GL_SUN_triangle_list
-#define GL_RESTART_SUN                    0x0001
-#define GL_REPLACE_MIDDLE_SUN             0x0002
-#define GL_REPLACE_OLDEST_SUN             0x0003
-#define GL_TRIANGLE_LIST_SUN              0x81D7
-#define GL_REPLACEMENT_CODE_SUN           0x81D8
-#define GL_REPLACEMENT_CODE_ARRAY_SUN     0x85C0
-#define GL_REPLACEMENT_CODE_ARRAY_TYPE_SUN 0x85C1
-#define GL_REPLACEMENT_CODE_ARRAY_STRIDE_SUN 0x85C2
-#define GL_REPLACEMENT_CODE_ARRAY_POINTER_SUN 0x85C3
-#define GL_R1UI_V3F_SUN                   0x85C4
-#define GL_R1UI_C4UB_V3F_SUN              0x85C5
-#define GL_R1UI_C3F_V3F_SUN               0x85C6
-#define GL_R1UI_N3F_V3F_SUN               0x85C7
-#define GL_R1UI_C4F_N3F_V3F_SUN           0x85C8
-#define GL_R1UI_T2F_V3F_SUN               0x85C9
-#define GL_R1UI_T2F_N3F_V3F_SUN           0x85CA
-#define GL_R1UI_T2F_C4F_N3F_V3F_SUN       0x85CB
-#endif
+#ifndef GL_ARB_texture_buffer_range
+#define GL_ARB_texture_buffer_range 1
+#endif /* GL_ARB_texture_buffer_range */
 
-#ifndef GL_SUN_vertex
-#endif
+#ifndef GL_ARB_texture_compression
+#define GL_ARB_texture_compression 1
+#define GL_COMPRESSED_ALPHA_ARB           0x84E9
+#define GL_COMPRESSED_LUMINANCE_ARB       0x84EA
+#define GL_COMPRESSED_LUMINANCE_ALPHA_ARB 0x84EB
+#define GL_COMPRESSED_INTENSITY_ARB       0x84EC
+#define GL_COMPRESSED_RGB_ARB             0x84ED
+#define GL_COMPRESSED_RGBA_ARB            0x84EE
+#define GL_TEXTURE_COMPRESSION_HINT_ARB   0x84EF
+#define GL_TEXTURE_COMPRESSED_IMAGE_SIZE_ARB 0x86A0
+#define GL_TEXTURE_COMPRESSED_ARB         0x86A1
+#define GL_NUM_COMPRESSED_TEXTURE_FORMATS_ARB 0x86A2
+#define GL_COMPRESSED_TEXTURE_FORMATS_ARB 0x86A3
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE2DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE1DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE2DARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE1DARBPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *data);
+typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXIMAGEARBPROC) (GLenum target, GLint level, void *img);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glCompressedTexImage3DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexImage2DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexImage1DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexSubImage3DARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexSubImage2DARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glCompressedTexSubImage1DARB (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *data);
+GLAPI void APIENTRY glGetCompressedTexImageARB (GLenum target, GLint level, void *img);
+#endif
+#endif /* GL_ARB_texture_compression */
 
-#ifndef GL_EXT_blend_func_separate
-#define GL_BLEND_DST_RGB_EXT              0x80C8
-#define GL_BLEND_SRC_RGB_EXT              0x80C9
-#define GL_BLEND_DST_ALPHA_EXT            0x80CA
-#define GL_BLEND_SRC_ALPHA_EXT            0x80CB
-#endif
+#ifndef GL_ARB_texture_compression_bptc
+#define GL_ARB_texture_compression_bptc 1
+#define GL_COMPRESSED_RGBA_BPTC_UNORM_ARB 0x8E8C
+#define GL_COMPRESSED_SRGB_ALPHA_BPTC_UNORM_ARB 0x8E8D
+#define GL_COMPRESSED_RGB_BPTC_SIGNED_FLOAT_ARB 0x8E8E
+#define GL_COMPRESSED_RGB_BPTC_UNSIGNED_FLOAT_ARB 0x8E8F
+#endif /* GL_ARB_texture_compression_bptc */
 
-#ifndef GL_INGR_color_clamp
-#define GL_RED_MIN_CLAMP_INGR             0x8560
-#define GL_GREEN_MIN_CLAMP_INGR           0x8561
-#define GL_BLUE_MIN_CLAMP_INGR            0x8562
-#define GL_ALPHA_MIN_CLAMP_INGR           0x8563
-#define GL_RED_MAX_CLAMP_INGR             0x8564
-#define GL_GREEN_MAX_CLAMP_INGR           0x8565
-#define GL_BLUE_MAX_CLAMP_INGR            0x8566
-#define GL_ALPHA_MAX_CLAMP_INGR           0x8567
-#endif
+#ifndef GL_ARB_texture_compression_rgtc
+#define GL_ARB_texture_compression_rgtc 1
+#endif /* GL_ARB_texture_compression_rgtc */
 
-#ifndef GL_INGR_interlace_read
-#define GL_INTERLACE_READ_INGR            0x8568
-#endif
+#ifndef GL_ARB_texture_cube_map
+#define GL_ARB_texture_cube_map 1
+#define GL_NORMAL_MAP_ARB                 0x8511
+#define GL_REFLECTION_MAP_ARB             0x8512
+#define GL_TEXTURE_CUBE_MAP_ARB           0x8513
+#define GL_TEXTURE_BINDING_CUBE_MAP_ARB   0x8514
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_X_ARB 0x8515
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X_ARB 0x8516
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y_ARB 0x8517
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_ARB 0x8518
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z_ARB 0x8519
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_ARB 0x851A
+#define GL_PROXY_TEXTURE_CUBE_MAP_ARB     0x851B
+#define GL_MAX_CUBE_MAP_TEXTURE_SIZE_ARB  0x851C
+#endif /* GL_ARB_texture_cube_map */
 
-#ifndef GL_EXT_stencil_wrap
-#define GL_INCR_WRAP_EXT                  0x8507
-#define GL_DECR_WRAP_EXT                  0x8508
-#endif
+#ifndef GL_ARB_texture_cube_map_array
+#define GL_ARB_texture_cube_map_array 1
+#define GL_TEXTURE_CUBE_MAP_ARRAY_ARB     0x9009
+#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY_ARB 0x900A
+#define GL_PROXY_TEXTURE_CUBE_MAP_ARRAY_ARB 0x900B
+#define GL_SAMPLER_CUBE_MAP_ARRAY_ARB     0x900C
+#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW_ARB 0x900D
+#define GL_INT_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900E
+#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900F
+#endif /* GL_ARB_texture_cube_map_array */
 
-#ifndef GL_EXT_422_pixels
-#define GL_422_EXT                        0x80CC
-#define GL_422_REV_EXT                    0x80CD
-#define GL_422_AVERAGE_EXT                0x80CE
-#define GL_422_REV_AVERAGE_EXT            0x80CF
-#endif
+#ifndef GL_ARB_texture_env_add
+#define GL_ARB_texture_env_add 1
+#endif /* GL_ARB_texture_env_add */
 
-#ifndef GL_NV_texgen_reflection
-#define GL_NORMAL_MAP_NV                  0x8511
-#define GL_REFLECTION_MAP_NV              0x8512
-#endif
+#ifndef GL_ARB_texture_env_combine
+#define GL_ARB_texture_env_combine 1
+#define GL_COMBINE_ARB                    0x8570
+#define GL_COMBINE_RGB_ARB                0x8571
+#define GL_COMBINE_ALPHA_ARB              0x8572
+#define GL_SOURCE0_RGB_ARB                0x8580
+#define GL_SOURCE1_RGB_ARB                0x8581
+#define GL_SOURCE2_RGB_ARB                0x8582
+#define GL_SOURCE0_ALPHA_ARB              0x8588
+#define GL_SOURCE1_ALPHA_ARB              0x8589
+#define GL_SOURCE2_ALPHA_ARB              0x858A
+#define GL_OPERAND0_RGB_ARB               0x8590
+#define GL_OPERAND1_RGB_ARB               0x8591
+#define GL_OPERAND2_RGB_ARB               0x8592
+#define GL_OPERAND0_ALPHA_ARB             0x8598
+#define GL_OPERAND1_ALPHA_ARB             0x8599
+#define GL_OPERAND2_ALPHA_ARB             0x859A
+#define GL_RGB_SCALE_ARB                  0x8573
+#define GL_ADD_SIGNED_ARB                 0x8574
+#define GL_INTERPOLATE_ARB                0x8575
+#define GL_SUBTRACT_ARB                   0x84E7
+#define GL_CONSTANT_ARB                   0x8576
+#define GL_PRIMARY_COLOR_ARB              0x8577
+#define GL_PREVIOUS_ARB                   0x8578
+#endif /* GL_ARB_texture_env_combine */
 
-#ifndef GL_EXT_texture_cube_map
-#define GL_NORMAL_MAP_EXT                 0x8511
-#define GL_REFLECTION_MAP_EXT             0x8512
-#define GL_TEXTURE_CUBE_MAP_EXT           0x8513
-#define GL_TEXTURE_BINDING_CUBE_MAP_EXT   0x8514
-#define GL_TEXTURE_CUBE_MAP_POSITIVE_X_EXT 0x8515
-#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X_EXT 0x8516
-#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y_EXT 0x8517
-#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_EXT 0x8518
-#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z_EXT 0x8519
-#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_EXT 0x851A
-#define GL_PROXY_TEXTURE_CUBE_MAP_EXT     0x851B
-#define GL_MAX_CUBE_MAP_TEXTURE_SIZE_EXT  0x851C
-#endif
+#ifndef GL_ARB_texture_env_crossbar
+#define GL_ARB_texture_env_crossbar 1
+#endif /* GL_ARB_texture_env_crossbar */
 
-#ifndef GL_SUN_convolution_border_modes
-#define GL_WRAP_BORDER_SUN                0x81D4
-#endif
+#ifndef GL_ARB_texture_env_dot3
+#define GL_ARB_texture_env_dot3 1
+#define GL_DOT3_RGB_ARB                   0x86AE
+#define GL_DOT3_RGBA_ARB                  0x86AF
+#endif /* GL_ARB_texture_env_dot3 */
 
-#ifndef GL_EXT_texture_env_add
-#endif
+#ifndef GL_ARB_texture_float
+#define GL_ARB_texture_float 1
+#define GL_TEXTURE_RED_TYPE_ARB           0x8C10
+#define GL_TEXTURE_GREEN_TYPE_ARB         0x8C11
+#define GL_TEXTURE_BLUE_TYPE_ARB          0x8C12
+#define GL_TEXTURE_ALPHA_TYPE_ARB         0x8C13
+#define GL_TEXTURE_LUMINANCE_TYPE_ARB     0x8C14
+#define GL_TEXTURE_INTENSITY_TYPE_ARB     0x8C15
+#define GL_TEXTURE_DEPTH_TYPE_ARB         0x8C16
+#define GL_UNSIGNED_NORMALIZED_ARB        0x8C17
+#define GL_RGBA32F_ARB                    0x8814
+#define GL_RGB32F_ARB                     0x8815
+#define GL_ALPHA32F_ARB                   0x8816
+#define GL_INTENSITY32F_ARB               0x8817
+#define GL_LUMINANCE32F_ARB               0x8818
+#define GL_LUMINANCE_ALPHA32F_ARB         0x8819
+#define GL_RGBA16F_ARB                    0x881A
+#define GL_RGB16F_ARB                     0x881B
+#define GL_ALPHA16F_ARB                   0x881C
+#define GL_INTENSITY16F_ARB               0x881D
+#define GL_LUMINANCE16F_ARB               0x881E
+#define GL_LUMINANCE_ALPHA16F_ARB         0x881F
+#endif /* GL_ARB_texture_float */
 
-#ifndef GL_EXT_texture_lod_bias
-#define GL_MAX_TEXTURE_LOD_BIAS_EXT       0x84FD
-#define GL_TEXTURE_FILTER_CONTROL_EXT     0x8500
-#define GL_TEXTURE_LOD_BIAS_EXT           0x8501
-#endif
+#ifndef GL_ARB_texture_gather
+#define GL_ARB_texture_gather 1
+#define GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET_ARB 0x8E5E
+#define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET_ARB 0x8E5F
+#define GL_MAX_PROGRAM_TEXTURE_GATHER_COMPONENTS_ARB 0x8F9F
+#endif /* GL_ARB_texture_gather */
 
-#ifndef GL_EXT_texture_filter_anisotropic
-#define GL_TEXTURE_MAX_ANISOTROPY_EXT     0x84FE
-#define GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT 0x84FF
-#endif
+#ifndef GL_ARB_texture_mirror_clamp_to_edge
+#define GL_ARB_texture_mirror_clamp_to_edge 1
+#endif /* GL_ARB_texture_mirror_clamp_to_edge */
 
-#ifndef GL_EXT_vertex_weighting
-#define GL_MODELVIEW0_STACK_DEPTH_EXT     GL_MODELVIEW_STACK_DEPTH
-#define GL_MODELVIEW1_STACK_DEPTH_EXT     0x8502
-#define GL_MODELVIEW0_MATRIX_EXT          GL_MODELVIEW_MATRIX
-#define GL_MODELVIEW1_MATRIX_EXT          0x8506
-#define GL_VERTEX_WEIGHTING_EXT           0x8509
-#define GL_MODELVIEW0_EXT                 GL_MODELVIEW
-#define GL_MODELVIEW1_EXT                 0x850A
-#define GL_CURRENT_VERTEX_WEIGHT_EXT      0x850B
-#define GL_VERTEX_WEIGHT_ARRAY_EXT        0x850C
-#define GL_VERTEX_WEIGHT_ARRAY_SIZE_EXT   0x850D
-#define GL_VERTEX_WEIGHT_ARRAY_TYPE_EXT   0x850E
-#define GL_VERTEX_WEIGHT_ARRAY_STRIDE_EXT 0x850F
-#define GL_VERTEX_WEIGHT_ARRAY_POINTER_EXT 0x8510
-#endif
+#ifndef GL_ARB_texture_mirrored_repeat
+#define GL_ARB_texture_mirrored_repeat 1
+#define GL_MIRRORED_REPEAT_ARB            0x8370
+#endif /* GL_ARB_texture_mirrored_repeat */
 
-#ifndef GL_NV_light_max_exponent
-#define GL_MAX_SHININESS_NV               0x8504
-#define GL_MAX_SPOT_EXPONENT_NV           0x8505
-#endif
+#ifndef GL_ARB_texture_multisample
+#define GL_ARB_texture_multisample 1
+#endif /* GL_ARB_texture_multisample */
 
-#ifndef GL_NV_vertex_array_range
-#define GL_VERTEX_ARRAY_RANGE_NV          0x851D
-#define GL_VERTEX_ARRAY_RANGE_LENGTH_NV   0x851E
-#define GL_VERTEX_ARRAY_RANGE_VALID_NV    0x851F
-#define GL_MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV 0x8520
-#define GL_VERTEX_ARRAY_RANGE_POINTER_NV  0x8521
-#endif
+#ifndef GL_ARB_texture_non_power_of_two
+#define GL_ARB_texture_non_power_of_two 1
+#endif /* GL_ARB_texture_non_power_of_two */
 
-#ifndef GL_NV_register_combiners
-#define GL_REGISTER_COMBINERS_NV          0x8522
-#define GL_VARIABLE_A_NV                  0x8523
-#define GL_VARIABLE_B_NV                  0x8524
-#define GL_VARIABLE_C_NV                  0x8525
-#define GL_VARIABLE_D_NV                  0x8526
-#define GL_VARIABLE_E_NV                  0x8527
-#define GL_VARIABLE_F_NV                  0x8528
-#define GL_VARIABLE_G_NV                  0x8529
-#define GL_CONSTANT_COLOR0_NV             0x852A
-#define GL_CONSTANT_COLOR1_NV             0x852B
-#define GL_PRIMARY_COLOR_NV               0x852C
-#define GL_SECONDARY_COLOR_NV             0x852D
-#define GL_SPARE0_NV                      0x852E
-#define GL_SPARE1_NV                      0x852F
-#define GL_DISCARD_NV                     0x8530
-#define GL_E_TIMES_F_NV                   0x8531
-#define GL_SPARE0_PLUS_SECONDARY_COLOR_NV 0x8532
-#define GL_UNSIGNED_IDENTITY_NV           0x8536
-#define GL_UNSIGNED_INVERT_NV             0x8537
-#define GL_EXPAND_NORMAL_NV               0x8538
-#define GL_EXPAND_NEGATE_NV               0x8539
-#define GL_HALF_BIAS_NORMAL_NV            0x853A
-#define GL_HALF_BIAS_NEGATE_NV            0x853B
-#define GL_SIGNED_IDENTITY_NV             0x853C
-#define GL_SIGNED_NEGATE_NV               0x853D
-#define GL_SCALE_BY_TWO_NV                0x853E
-#define GL_SCALE_BY_FOUR_NV               0x853F
-#define GL_SCALE_BY_ONE_HALF_NV           0x8540
-#define GL_BIAS_BY_NEGATIVE_ONE_HALF_NV   0x8541
-#define GL_COMBINER_INPUT_NV              0x8542
-#define GL_COMBINER_MAPPING_NV            0x8543
-#define GL_COMBINER_COMPONENT_USAGE_NV    0x8544
-#define GL_COMBINER_AB_DOT_PRODUCT_NV     0x8545
-#define GL_COMBINER_CD_DOT_PRODUCT_NV     0x8546
-#define GL_COMBINER_MUX_SUM_NV            0x8547
-#define GL_COMBINER_SCALE_NV              0x8548
-#define GL_COMBINER_BIAS_NV               0x8549
-#define GL_COMBINER_AB_OUTPUT_NV          0x854A
-#define GL_COMBINER_CD_OUTPUT_NV          0x854B
-#define GL_COMBINER_SUM_OUTPUT_NV         0x854C
-#define GL_MAX_GENERAL_COMBINERS_NV       0x854D
-#define GL_NUM_GENERAL_COMBINERS_NV       0x854E
-#define GL_COLOR_SUM_CLAMP_NV             0x854F
-#define GL_COMBINER0_NV                   0x8550
-#define GL_COMBINER1_NV                   0x8551
-#define GL_COMBINER2_NV                   0x8552
-#define GL_COMBINER3_NV                   0x8553
-#define GL_COMBINER4_NV                   0x8554
-#define GL_COMBINER5_NV                   0x8555
-#define GL_COMBINER6_NV                   0x8556
-#define GL_COMBINER7_NV                   0x8557
-/* reuse GL_TEXTURE0_ARB */
-/* reuse GL_TEXTURE1_ARB */
-/* reuse GL_ZERO */
-/* reuse GL_NONE */
-/* reuse GL_FOG */
-#endif
+#ifndef GL_ARB_texture_query_levels
+#define GL_ARB_texture_query_levels 1
+#endif /* GL_ARB_texture_query_levels */
 
-#ifndef GL_NV_fog_distance
-#define GL_FOG_DISTANCE_MODE_NV           0x855A
-#define GL_EYE_RADIAL_NV                  0x855B
-#define GL_EYE_PLANE_ABSOLUTE_NV          0x855C
-/* reuse GL_EYE_PLANE */
-#endif
+#ifndef GL_ARB_texture_query_lod
+#define GL_ARB_texture_query_lod 1
+#endif /* GL_ARB_texture_query_lod */
 
-#ifndef GL_NV_texgen_emboss
-#define GL_EMBOSS_LIGHT_NV                0x855D
-#define GL_EMBOSS_CONSTANT_NV             0x855E
-#define GL_EMBOSS_MAP_NV                  0x855F
-#endif
+#ifndef GL_ARB_texture_rectangle
+#define GL_ARB_texture_rectangle 1
+#define GL_TEXTURE_RECTANGLE_ARB          0x84F5
+#define GL_TEXTURE_BINDING_RECTANGLE_ARB  0x84F6
+#define GL_PROXY_TEXTURE_RECTANGLE_ARB    0x84F7
+#define GL_MAX_RECTANGLE_TEXTURE_SIZE_ARB 0x84F8
+#endif /* GL_ARB_texture_rectangle */
 
-#ifndef GL_NV_blend_square
-#endif
+#ifndef GL_ARB_texture_rg
+#define GL_ARB_texture_rg 1
+#endif /* GL_ARB_texture_rg */
 
-#ifndef GL_NV_texture_env_combine4
-#define GL_COMBINE4_NV                    0x8503
-#define GL_SOURCE3_RGB_NV                 0x8583
-#define GL_SOURCE3_ALPHA_NV               0x858B
-#define GL_OPERAND3_RGB_NV                0x8593
-#define GL_OPERAND3_ALPHA_NV              0x859B
-#endif
+#ifndef GL_ARB_texture_rgb10_a2ui
+#define GL_ARB_texture_rgb10_a2ui 1
+#endif /* GL_ARB_texture_rgb10_a2ui */
 
-#ifndef GL_MESA_resize_buffers
-#endif
+#ifndef GL_ARB_texture_stencil8
+#define GL_ARB_texture_stencil8 1
+#endif /* GL_ARB_texture_stencil8 */
 
-#ifndef GL_MESA_window_pos
+#ifndef GL_ARB_texture_storage
+#define GL_ARB_texture_storage 1
+#endif /* GL_ARB_texture_storage */
+
+#ifndef GL_ARB_texture_storage_multisample
+#define GL_ARB_texture_storage_multisample 1
+#endif /* GL_ARB_texture_storage_multisample */
+
+#ifndef GL_ARB_texture_swizzle
+#define GL_ARB_texture_swizzle 1
+#endif /* GL_ARB_texture_swizzle */
+
+#ifndef GL_ARB_texture_view
+#define GL_ARB_texture_view 1
+#endif /* GL_ARB_texture_view */
+
+#ifndef GL_ARB_timer_query
+#define GL_ARB_timer_query 1
+#endif /* GL_ARB_timer_query */
+
+#ifndef GL_ARB_transform_feedback2
+#define GL_ARB_transform_feedback2 1
+#define GL_TRANSFORM_FEEDBACK_PAUSED      0x8E23
+#define GL_TRANSFORM_FEEDBACK_ACTIVE      0x8E24
+#endif /* GL_ARB_transform_feedback2 */
+
+#ifndef GL_ARB_transform_feedback3
+#define GL_ARB_transform_feedback3 1
+#endif /* GL_ARB_transform_feedback3 */
+
+#ifndef GL_ARB_transform_feedback_instanced
+#define GL_ARB_transform_feedback_instanced 1
+#endif /* GL_ARB_transform_feedback_instanced */
+
+#ifndef GL_ARB_transform_feedback_overflow_query
+#define GL_ARB_transform_feedback_overflow_query 1
+#define GL_TRANSFORM_FEEDBACK_OVERFLOW_ARB 0x82EC
+#define GL_TRANSFORM_FEEDBACK_STREAM_OVERFLOW_ARB 0x82ED
+#endif /* GL_ARB_transform_feedback_overflow_query */
+
+#ifndef GL_ARB_transpose_matrix
+#define GL_ARB_transpose_matrix 1
+#define GL_TRANSPOSE_MODELVIEW_MATRIX_ARB 0x84E3
+#define GL_TRANSPOSE_PROJECTION_MATRIX_ARB 0x84E4
+#define GL_TRANSPOSE_TEXTURE_MATRIX_ARB   0x84E5
+#define GL_TRANSPOSE_COLOR_MATRIX_ARB     0x84E6
+typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXFARBPROC) (const GLfloat *m);
+typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXDARBPROC) (const GLdouble *m);
+typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXFARBPROC) (const GLfloat *m);
+typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXDARBPROC) (const GLdouble *m);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glLoadTransposeMatrixfARB (const GLfloat *m);
+GLAPI void APIENTRY glLoadTransposeMatrixdARB (const GLdouble *m);
+GLAPI void APIENTRY glMultTransposeMatrixfARB (const GLfloat *m);
+GLAPI void APIENTRY glMultTransposeMatrixdARB (const GLdouble *m);
 #endif
+#endif /* GL_ARB_transpose_matrix */
 
-#ifndef GL_EXT_texture_compression_s3tc
-#define GL_COMPRESSED_RGB_S3TC_DXT1_EXT   0x83F0
-#define GL_COMPRESSED_RGBA_S3TC_DXT1_EXT  0x83F1
-#define GL_COMPRESSED_RGBA_S3TC_DXT3_EXT  0x83F2
-#define GL_COMPRESSED_RGBA_S3TC_DXT5_EXT  0x83F3
+#ifndef GL_ARB_uniform_buffer_object
+#define GL_ARB_uniform_buffer_object 1
+#endif /* GL_ARB_uniform_buffer_object */
+
+#ifndef GL_ARB_vertex_array_bgra
+#define GL_ARB_vertex_array_bgra 1
+#endif /* GL_ARB_vertex_array_bgra */
+
+#ifndef GL_ARB_vertex_array_object
+#define GL_ARB_vertex_array_object 1
+#endif /* GL_ARB_vertex_array_object */
+
+#ifndef GL_ARB_vertex_attrib_64bit
+#define GL_ARB_vertex_attrib_64bit 1
+#endif /* GL_ARB_vertex_attrib_64bit */
+
+#ifndef GL_ARB_vertex_attrib_binding
+#define GL_ARB_vertex_attrib_binding 1
+#endif /* GL_ARB_vertex_attrib_binding */
+
+#ifndef GL_ARB_vertex_blend
+#define GL_ARB_vertex_blend 1
+#define GL_MAX_VERTEX_UNITS_ARB           0x86A4
+#define GL_ACTIVE_VERTEX_UNITS_ARB        0x86A5
+#define GL_WEIGHT_SUM_UNITY_ARB           0x86A6
+#define GL_VERTEX_BLEND_ARB               0x86A7
+#define GL_CURRENT_WEIGHT_ARB             0x86A8
+#define GL_WEIGHT_ARRAY_TYPE_ARB          0x86A9
+#define GL_WEIGHT_ARRAY_STRIDE_ARB        0x86AA
+#define GL_WEIGHT_ARRAY_SIZE_ARB          0x86AB
+#define GL_WEIGHT_ARRAY_POINTER_ARB       0x86AC
+#define GL_WEIGHT_ARRAY_ARB               0x86AD
+#define GL_MODELVIEW0_ARB                 0x1700
+#define GL_MODELVIEW1_ARB                 0x850A
+#define GL_MODELVIEW2_ARB                 0x8722
+#define GL_MODELVIEW3_ARB                 0x8723
+#define GL_MODELVIEW4_ARB                 0x8724
+#define GL_MODELVIEW5_ARB                 0x8725
+#define GL_MODELVIEW6_ARB                 0x8726
+#define GL_MODELVIEW7_ARB                 0x8727
+#define GL_MODELVIEW8_ARB                 0x8728
+#define GL_MODELVIEW9_ARB                 0x8729
+#define GL_MODELVIEW10_ARB                0x872A
+#define GL_MODELVIEW11_ARB                0x872B
+#define GL_MODELVIEW12_ARB                0x872C
+#define GL_MODELVIEW13_ARB                0x872D
+#define GL_MODELVIEW14_ARB                0x872E
+#define GL_MODELVIEW15_ARB                0x872F
+#define GL_MODELVIEW16_ARB                0x8730
+#define GL_MODELVIEW17_ARB                0x8731
+#define GL_MODELVIEW18_ARB                0x8732
+#define GL_MODELVIEW19_ARB                0x8733
+#define GL_MODELVIEW20_ARB                0x8734
+#define GL_MODELVIEW21_ARB                0x8735
+#define GL_MODELVIEW22_ARB                0x8736
+#define GL_MODELVIEW23_ARB                0x8737
+#define GL_MODELVIEW24_ARB                0x8738
+#define GL_MODELVIEW25_ARB                0x8739
+#define GL_MODELVIEW26_ARB                0x873A
+#define GL_MODELVIEW27_ARB                0x873B
+#define GL_MODELVIEW28_ARB                0x873C
+#define GL_MODELVIEW29_ARB                0x873D
+#define GL_MODELVIEW30_ARB                0x873E
+#define GL_MODELVIEW31_ARB                0x873F
+typedef void (APIENTRYP PFNGLWEIGHTBVARBPROC) (GLint size, const GLbyte *weights);
+typedef void (APIENTRYP PFNGLWEIGHTSVARBPROC) (GLint size, const GLshort *weights);
+typedef void (APIENTRYP PFNGLWEIGHTIVARBPROC) (GLint size, const GLint *weights);
+typedef void (APIENTRYP PFNGLWEIGHTFVARBPROC) (GLint size, const GLfloat *weights);
+typedef void (APIENTRYP PFNGLWEIGHTDVARBPROC) (GLint size, const GLdouble *weights);
+typedef void (APIENTRYP PFNGLWEIGHTUBVARBPROC) (GLint size, const GLubyte *weights);
+typedef void (APIENTRYP PFNGLWEIGHTUSVARBPROC) (GLint size, const GLushort *weights);
+typedef void (APIENTRYP PFNGLWEIGHTUIVARBPROC) (GLint size, const GLuint *weights);
+typedef void (APIENTRYP PFNGLWEIGHTPOINTERARBPROC) (GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLVERTEXBLENDARBPROC) (GLint count);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glWeightbvARB (GLint size, const GLbyte *weights);
+GLAPI void APIENTRY glWeightsvARB (GLint size, const GLshort *weights);
+GLAPI void APIENTRY glWeightivARB (GLint size, const GLint *weights);
+GLAPI void APIENTRY glWeightfvARB (GLint size, const GLfloat *weights);
+GLAPI void APIENTRY glWeightdvARB (GLint size, const GLdouble *weights);
+GLAPI void APIENTRY glWeightubvARB (GLint size, const GLubyte *weights);
+GLAPI void APIENTRY glWeightusvARB (GLint size, const GLushort *weights);
+GLAPI void APIENTRY glWeightuivARB (GLint size, const GLuint *weights);
+GLAPI void APIENTRY glWeightPointerARB (GLint size, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glVertexBlendARB (GLint count);
 #endif
+#endif /* GL_ARB_vertex_blend */
 
-#ifndef GL_IBM_cull_vertex
-#define GL_CULL_VERTEX_IBM                103050
+#ifndef GL_ARB_vertex_buffer_object
+#define GL_ARB_vertex_buffer_object 1
+typedef ptrdiff_t GLsizeiptrARB;
+typedef ptrdiff_t GLintptrARB;
+#define GL_BUFFER_SIZE_ARB                0x8764
+#define GL_BUFFER_USAGE_ARB               0x8765
+#define GL_ARRAY_BUFFER_ARB               0x8892
+#define GL_ELEMENT_ARRAY_BUFFER_ARB       0x8893
+#define GL_ARRAY_BUFFER_BINDING_ARB       0x8894
+#define GL_ELEMENT_ARRAY_BUFFER_BINDING_ARB 0x8895
+#define GL_VERTEX_ARRAY_BUFFER_BINDING_ARB 0x8896
+#define GL_NORMAL_ARRAY_BUFFER_BINDING_ARB 0x8897
+#define GL_COLOR_ARRAY_BUFFER_BINDING_ARB 0x8898
+#define GL_INDEX_ARRAY_BUFFER_BINDING_ARB 0x8899
+#define GL_TEXTURE_COORD_ARRAY_BUFFER_BINDING_ARB 0x889A
+#define GL_EDGE_FLAG_ARRAY_BUFFER_BINDING_ARB 0x889B
+#define GL_SECONDARY_COLOR_ARRAY_BUFFER_BINDING_ARB 0x889C
+#define GL_FOG_COORDINATE_ARRAY_BUFFER_BINDING_ARB 0x889D
+#define GL_WEIGHT_ARRAY_BUFFER_BINDING_ARB 0x889E
+#define GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING_ARB 0x889F
+#define GL_READ_ONLY_ARB                  0x88B8
+#define GL_WRITE_ONLY_ARB                 0x88B9
+#define GL_READ_WRITE_ARB                 0x88BA
+#define GL_BUFFER_ACCESS_ARB              0x88BB
+#define GL_BUFFER_MAPPED_ARB              0x88BC
+#define GL_BUFFER_MAP_POINTER_ARB         0x88BD
+#define GL_STREAM_DRAW_ARB                0x88E0
+#define GL_STREAM_READ_ARB                0x88E1
+#define GL_STREAM_COPY_ARB                0x88E2
+#define GL_STATIC_DRAW_ARB                0x88E4
+#define GL_STATIC_READ_ARB                0x88E5
+#define GL_STATIC_COPY_ARB                0x88E6
+#define GL_DYNAMIC_DRAW_ARB               0x88E8
+#define GL_DYNAMIC_READ_ARB               0x88E9
+#define GL_DYNAMIC_COPY_ARB               0x88EA
+typedef void (APIENTRYP PFNGLBINDBUFFERARBPROC) (GLenum target, GLuint buffer);
+typedef void (APIENTRYP PFNGLDELETEBUFFERSARBPROC) (GLsizei n, const GLuint *buffers);
+typedef void (APIENTRYP PFNGLGENBUFFERSARBPROC) (GLsizei n, GLuint *buffers);
+typedef GLboolean (APIENTRYP PFNGLISBUFFERARBPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLBUFFERDATAARBPROC) (GLenum target, GLsizeiptrARB size, const void *data, GLenum usage);
+typedef void (APIENTRYP PFNGLBUFFERSUBDATAARBPROC) (GLenum target, GLintptrARB offset, GLsizeiptrARB size, const void *data);
+typedef void (APIENTRYP PFNGLGETBUFFERSUBDATAARBPROC) (GLenum target, GLintptrARB offset, GLsizeiptrARB size, void *data);
+typedef void *(APIENTRYP PFNGLMAPBUFFERARBPROC) (GLenum target, GLenum access);
+typedef GLboolean (APIENTRYP PFNGLUNMAPBUFFERARBPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERIVARBPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETBUFFERPOINTERVARBPROC) (GLenum target, GLenum pname, void **params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBindBufferARB (GLenum target, GLuint buffer);
+GLAPI void APIENTRY glDeleteBuffersARB (GLsizei n, const GLuint *buffers);
+GLAPI void APIENTRY glGenBuffersARB (GLsizei n, GLuint *buffers);
+GLAPI GLboolean APIENTRY glIsBufferARB (GLuint buffer);
+GLAPI void APIENTRY glBufferDataARB (GLenum target, GLsizeiptrARB size, const void *data, GLenum usage);
+GLAPI void APIENTRY glBufferSubDataARB (GLenum target, GLintptrARB offset, GLsizeiptrARB size, const void *data);
+GLAPI void APIENTRY glGetBufferSubDataARB (GLenum target, GLintptrARB offset, GLsizeiptrARB size, void *data);
+GLAPI void *APIENTRY glMapBufferARB (GLenum target, GLenum access);
+GLAPI GLboolean APIENTRY glUnmapBufferARB (GLenum target);
+GLAPI void APIENTRY glGetBufferParameterivARB (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetBufferPointervARB (GLenum target, GLenum pname, void **params);
 #endif
+#endif /* GL_ARB_vertex_buffer_object */
 
-#ifndef GL_IBM_multimode_draw_arrays
+#ifndef GL_ARB_vertex_program
+#define GL_ARB_vertex_program 1
+#define GL_COLOR_SUM_ARB                  0x8458
+#define GL_VERTEX_PROGRAM_ARB             0x8620
+#define GL_VERTEX_ATTRIB_ARRAY_ENABLED_ARB 0x8622
+#define GL_VERTEX_ATTRIB_ARRAY_SIZE_ARB   0x8623
+#define GL_VERTEX_ATTRIB_ARRAY_STRIDE_ARB 0x8624
+#define GL_VERTEX_ATTRIB_ARRAY_TYPE_ARB   0x8625
+#define GL_CURRENT_VERTEX_ATTRIB_ARB      0x8626
+#define GL_VERTEX_PROGRAM_POINT_SIZE_ARB  0x8642
+#define GL_VERTEX_PROGRAM_TWO_SIDE_ARB    0x8643
+#define GL_VERTEX_ATTRIB_ARRAY_POINTER_ARB 0x8645
+#define GL_MAX_VERTEX_ATTRIBS_ARB         0x8869
+#define GL_VERTEX_ATTRIB_ARRAY_NORMALIZED_ARB 0x886A
+#define GL_PROGRAM_ADDRESS_REGISTERS_ARB  0x88B0
+#define GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB 0x88B1
+#define GL_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB 0x88B2
+#define GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB 0x88B3
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1DARBPROC) (GLuint index, GLdouble x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVARBPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1FARBPROC) (GLuint index, GLfloat x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVARBPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1SARBPROC) (GLuint index, GLshort x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVARBPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2DARBPROC) (GLuint index, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVARBPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2FARBPROC) (GLuint index, GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVARBPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2SARBPROC) (GLuint index, GLshort x, GLshort y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVARBPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3DARBPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVARBPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3FARBPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVARBPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3SARBPROC) (GLuint index, GLshort x, GLshort y, GLshort z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVARBPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NBVARBPROC) (GLuint index, const GLbyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NIVARBPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NSVARBPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBARBPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBVARBPROC) (GLuint index, const GLubyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUIVARBPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUSVARBPROC) (GLuint index, const GLushort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4BVARBPROC) (GLuint index, const GLbyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4DARBPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVARBPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4FARBPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVARBPROC) (GLuint index, const GLfloat *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4IVARBPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4SARBPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVARBPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVARBPROC) (GLuint index, const GLubyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4UIVARBPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4USVARBPROC) (GLuint index, const GLushort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERARBPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBARRAYARBPROC) (GLuint index);
+typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBARRAYARBPROC) (GLuint index);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVARBPROC) (GLuint index, GLenum pname, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVARBPROC) (GLuint index, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVARBPROC) (GLuint index, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVARBPROC) (GLuint index, GLenum pname, void **pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexAttrib1dARB (GLuint index, GLdouble x);
+GLAPI void APIENTRY glVertexAttrib1dvARB (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib1fARB (GLuint index, GLfloat x);
+GLAPI void APIENTRY glVertexAttrib1fvARB (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib1sARB (GLuint index, GLshort x);
+GLAPI void APIENTRY glVertexAttrib1svARB (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib2dARB (GLuint index, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glVertexAttrib2dvARB (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib2fARB (GLuint index, GLfloat x, GLfloat y);
+GLAPI void APIENTRY glVertexAttrib2fvARB (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib2sARB (GLuint index, GLshort x, GLshort y);
+GLAPI void APIENTRY glVertexAttrib2svARB (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib3dARB (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glVertexAttrib3dvARB (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib3fARB (GLuint index, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glVertexAttrib3fvARB (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib3sARB (GLuint index, GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glVertexAttrib3svARB (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4NbvARB (GLuint index, const GLbyte *v);
+GLAPI void APIENTRY glVertexAttrib4NivARB (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttrib4NsvARB (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4NubARB (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
+GLAPI void APIENTRY glVertexAttrib4NubvARB (GLuint index, const GLubyte *v);
+GLAPI void APIENTRY glVertexAttrib4NuivARB (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttrib4NusvARB (GLuint index, const GLushort *v);
+GLAPI void APIENTRY glVertexAttrib4bvARB (GLuint index, const GLbyte *v);
+GLAPI void APIENTRY glVertexAttrib4dARB (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glVertexAttrib4dvARB (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib4fARB (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glVertexAttrib4fvARB (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib4ivARB (GLuint index, const GLint *v);
+GLAPI void APIENTRY glVertexAttrib4sARB (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
+GLAPI void APIENTRY glVertexAttrib4svARB (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4ubvARB (GLuint index, const GLubyte *v);
+GLAPI void APIENTRY glVertexAttrib4uivARB (GLuint index, const GLuint *v);
+GLAPI void APIENTRY glVertexAttrib4usvARB (GLuint index, const GLushort *v);
+GLAPI void APIENTRY glVertexAttribPointerARB (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glEnableVertexAttribArrayARB (GLuint index);
+GLAPI void APIENTRY glDisableVertexAttribArrayARB (GLuint index);
+GLAPI void APIENTRY glGetVertexAttribdvARB (GLuint index, GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glGetVertexAttribfvARB (GLuint index, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetVertexAttribivARB (GLuint index, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVertexAttribPointervARB (GLuint index, GLenum pname, void **pointer);
 #endif
+#endif /* GL_ARB_vertex_program */
 
-#ifndef GL_IBM_vertex_array_lists
-#define GL_VERTEX_ARRAY_LIST_IBM          103070
-#define GL_NORMAL_ARRAY_LIST_IBM          103071
-#define GL_COLOR_ARRAY_LIST_IBM           103072
-#define GL_INDEX_ARRAY_LIST_IBM           103073
-#define GL_TEXTURE_COORD_ARRAY_LIST_IBM   103074
-#define GL_EDGE_FLAG_ARRAY_LIST_IBM       103075
-#define GL_FOG_COORDINATE_ARRAY_LIST_IBM  103076
-#define GL_SECONDARY_COLOR_ARRAY_LIST_IBM 103077
-#define GL_VERTEX_ARRAY_LIST_STRIDE_IBM   103080
-#define GL_NORMAL_ARRAY_LIST_STRIDE_IBM   103081
-#define GL_COLOR_ARRAY_LIST_STRIDE_IBM    103082
-#define GL_INDEX_ARRAY_LIST_STRIDE_IBM    103083
-#define GL_TEXTURE_COORD_ARRAY_LIST_STRIDE_IBM 103084
-#define GL_EDGE_FLAG_ARRAY_LIST_STRIDE_IBM 103085
-#define GL_FOG_COORDINATE_ARRAY_LIST_STRIDE_IBM 103086
-#define GL_SECONDARY_COLOR_ARRAY_LIST_STRIDE_IBM 103087
+#ifndef GL_ARB_vertex_shader
+#define GL_ARB_vertex_shader 1
+#define GL_VERTEX_SHADER_ARB              0x8B31
+#define GL_MAX_VERTEX_UNIFORM_COMPONENTS_ARB 0x8B4A
+#define GL_MAX_VARYING_FLOATS_ARB         0x8B4B
+#define GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS_ARB 0x8B4C
+#define GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS_ARB 0x8B4D
+#define GL_OBJECT_ACTIVE_ATTRIBUTES_ARB   0x8B89
+#define GL_OBJECT_ACTIVE_ATTRIBUTE_MAX_LENGTH_ARB 0x8B8A
+typedef void (APIENTRYP PFNGLBINDATTRIBLOCATIONARBPROC) (GLhandleARB programObj, GLuint index, const GLcharARB *name);
+typedef void (APIENTRYP PFNGLGETACTIVEATTRIBARBPROC) (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
+typedef GLint (APIENTRYP PFNGLGETATTRIBLOCATIONARBPROC) (GLhandleARB programObj, const GLcharARB *name);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBindAttribLocationARB (GLhandleARB programObj, GLuint index, const GLcharARB *name);
+GLAPI void APIENTRY glGetActiveAttribARB (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
+GLAPI GLint APIENTRY glGetAttribLocationARB (GLhandleARB programObj, const GLcharARB *name);
 #endif
+#endif /* GL_ARB_vertex_shader */
 
-#ifndef GL_SGIX_subsample
-#define GL_PACK_SUBSAMPLE_RATE_SGIX       0x85A0
-#define GL_UNPACK_SUBSAMPLE_RATE_SGIX     0x85A1
-#define GL_PIXEL_SUBSAMPLE_4444_SGIX      0x85A2
-#define GL_PIXEL_SUBSAMPLE_2424_SGIX      0x85A3
-#define GL_PIXEL_SUBSAMPLE_4242_SGIX      0x85A4
+#ifndef GL_ARB_vertex_type_10f_11f_11f_rev
+#define GL_ARB_vertex_type_10f_11f_11f_rev 1
+#endif /* GL_ARB_vertex_type_10f_11f_11f_rev */
+
+#ifndef GL_ARB_vertex_type_2_10_10_10_rev
+#define GL_ARB_vertex_type_2_10_10_10_rev 1
+#endif /* GL_ARB_vertex_type_2_10_10_10_rev */
+
+#ifndef GL_ARB_viewport_array
+#define GL_ARB_viewport_array 1
+#endif /* GL_ARB_viewport_array */
+
+#ifndef GL_ARB_window_pos
+#define GL_ARB_window_pos 1
+typedef void (APIENTRYP PFNGLWINDOWPOS2DARBPROC) (GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2DVARBPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2FARBPROC) (GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2FVARBPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2IARBPROC) (GLint x, GLint y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2IVARBPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2SARBPROC) (GLshort x, GLshort y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2SVARBPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3DARBPROC) (GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3DVARBPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3FARBPROC) (GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3FVARBPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3IARBPROC) (GLint x, GLint y, GLint z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3IVARBPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3SARBPROC) (GLshort x, GLshort y, GLshort z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3SVARBPROC) (const GLshort *v);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glWindowPos2dARB (GLdouble x, GLdouble y);
+GLAPI void APIENTRY glWindowPos2dvARB (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos2fARB (GLfloat x, GLfloat y);
+GLAPI void APIENTRY glWindowPos2fvARB (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos2iARB (GLint x, GLint y);
+GLAPI void APIENTRY glWindowPos2ivARB (const GLint *v);
+GLAPI void APIENTRY glWindowPos2sARB (GLshort x, GLshort y);
+GLAPI void APIENTRY glWindowPos2svARB (const GLshort *v);
+GLAPI void APIENTRY glWindowPos3dARB (GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glWindowPos3dvARB (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos3fARB (GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glWindowPos3fvARB (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos3iARB (GLint x, GLint y, GLint z);
+GLAPI void APIENTRY glWindowPos3ivARB (const GLint *v);
+GLAPI void APIENTRY glWindowPos3sARB (GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glWindowPos3svARB (const GLshort *v);
 #endif
+#endif /* GL_ARB_window_pos */
+
+#ifndef GL_KHR_blend_equation_advanced
+#define GL_KHR_blend_equation_advanced 1
+#define GL_MULTIPLY_KHR                   0x9294
+#define GL_SCREEN_KHR                     0x9295
+#define GL_OVERLAY_KHR                    0x9296
+#define GL_DARKEN_KHR                     0x9297
+#define GL_LIGHTEN_KHR                    0x9298
+#define GL_COLORDODGE_KHR                 0x9299
+#define GL_COLORBURN_KHR                  0x929A
+#define GL_HARDLIGHT_KHR                  0x929B
+#define GL_SOFTLIGHT_KHR                  0x929C
+#define GL_DIFFERENCE_KHR                 0x929E
+#define GL_EXCLUSION_KHR                  0x92A0
+#define GL_HSL_HUE_KHR                    0x92AD
+#define GL_HSL_SATURATION_KHR             0x92AE
+#define GL_HSL_COLOR_KHR                  0x92AF
+#define GL_HSL_LUMINOSITY_KHR             0x92B0
+typedef void (APIENTRYP PFNGLBLENDBARRIERKHRPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendBarrierKHR (void);
+#endif
+#endif /* GL_KHR_blend_equation_advanced */
+
+#ifndef GL_KHR_blend_equation_advanced_coherent
+#define GL_KHR_blend_equation_advanced_coherent 1
+#define GL_BLEND_ADVANCED_COHERENT_KHR    0x9285
+#endif /* GL_KHR_blend_equation_advanced_coherent */
+
+#ifndef GL_KHR_context_flush_control
+#define GL_KHR_context_flush_control 1
+#endif /* GL_KHR_context_flush_control */
 
-#ifndef GL_SGIX_ycrcb_subsample
+#ifndef GL_KHR_debug
+#define GL_KHR_debug 1
+#endif /* GL_KHR_debug */
+
+#ifndef GL_KHR_robust_buffer_access_behavior
+#define GL_KHR_robust_buffer_access_behavior 1
+#endif /* GL_KHR_robust_buffer_access_behavior */
+
+#ifndef GL_KHR_robustness
+#define GL_KHR_robustness 1
+#define GL_CONTEXT_ROBUST_ACCESS          0x90F3
+#endif /* GL_KHR_robustness */
+
+#ifndef GL_KHR_texture_compression_astc_hdr
+#define GL_KHR_texture_compression_astc_hdr 1
+#define GL_COMPRESSED_RGBA_ASTC_4x4_KHR   0x93B0
+#define GL_COMPRESSED_RGBA_ASTC_5x4_KHR   0x93B1
+#define GL_COMPRESSED_RGBA_ASTC_5x5_KHR   0x93B2
+#define GL_COMPRESSED_RGBA_ASTC_6x5_KHR   0x93B3
+#define GL_COMPRESSED_RGBA_ASTC_6x6_KHR   0x93B4
+#define GL_COMPRESSED_RGBA_ASTC_8x5_KHR   0x93B5
+#define GL_COMPRESSED_RGBA_ASTC_8x6_KHR   0x93B6
+#define GL_COMPRESSED_RGBA_ASTC_8x8_KHR   0x93B7
+#define GL_COMPRESSED_RGBA_ASTC_10x5_KHR  0x93B8
+#define GL_COMPRESSED_RGBA_ASTC_10x6_KHR  0x93B9
+#define GL_COMPRESSED_RGBA_ASTC_10x8_KHR  0x93BA
+#define GL_COMPRESSED_RGBA_ASTC_10x10_KHR 0x93BB
+#define GL_COMPRESSED_RGBA_ASTC_12x10_KHR 0x93BC
+#define GL_COMPRESSED_RGBA_ASTC_12x12_KHR 0x93BD
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_4x4_KHR 0x93D0
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x4_KHR 0x93D1
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_5x5_KHR 0x93D2
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x5_KHR 0x93D3
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_6x6_KHR 0x93D4
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x5_KHR 0x93D5
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x6_KHR 0x93D6
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_8x8_KHR 0x93D7
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x5_KHR 0x93D8
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x6_KHR 0x93D9
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x8_KHR 0x93DA
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_10x10_KHR 0x93DB
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x10_KHR 0x93DC
+#define GL_COMPRESSED_SRGB8_ALPHA8_ASTC_12x12_KHR 0x93DD
+#endif /* GL_KHR_texture_compression_astc_hdr */
+
+#ifndef GL_KHR_texture_compression_astc_ldr
+#define GL_KHR_texture_compression_astc_ldr 1
+#endif /* GL_KHR_texture_compression_astc_ldr */
+
+#ifndef GL_OES_byte_coordinates
+#define GL_OES_byte_coordinates 1
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1BOESPROC) (GLenum texture, GLbyte s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1BVOESPROC) (GLenum texture, const GLbyte *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2BOESPROC) (GLenum texture, GLbyte s, GLbyte t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2BVOESPROC) (GLenum texture, const GLbyte *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3BOESPROC) (GLenum texture, GLbyte s, GLbyte t, GLbyte r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3BVOESPROC) (GLenum texture, const GLbyte *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4BOESPROC) (GLenum texture, GLbyte s, GLbyte t, GLbyte r, GLbyte q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4BVOESPROC) (GLenum texture, const GLbyte *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD1BOESPROC) (GLbyte s);
+typedef void (APIENTRYP PFNGLTEXCOORD1BVOESPROC) (const GLbyte *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD2BOESPROC) (GLbyte s, GLbyte t);
+typedef void (APIENTRYP PFNGLTEXCOORD2BVOESPROC) (const GLbyte *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD3BOESPROC) (GLbyte s, GLbyte t, GLbyte r);
+typedef void (APIENTRYP PFNGLTEXCOORD3BVOESPROC) (const GLbyte *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD4BOESPROC) (GLbyte s, GLbyte t, GLbyte r, GLbyte q);
+typedef void (APIENTRYP PFNGLTEXCOORD4BVOESPROC) (const GLbyte *coords);
+typedef void (APIENTRYP PFNGLVERTEX2BOESPROC) (GLbyte x, GLbyte y);
+typedef void (APIENTRYP PFNGLVERTEX2BVOESPROC) (const GLbyte *coords);
+typedef void (APIENTRYP PFNGLVERTEX3BOESPROC) (GLbyte x, GLbyte y, GLbyte z);
+typedef void (APIENTRYP PFNGLVERTEX3BVOESPROC) (const GLbyte *coords);
+typedef void (APIENTRYP PFNGLVERTEX4BOESPROC) (GLbyte x, GLbyte y, GLbyte z, GLbyte w);
+typedef void (APIENTRYP PFNGLVERTEX4BVOESPROC) (const GLbyte *coords);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiTexCoord1bOES (GLenum texture, GLbyte s);
+GLAPI void APIENTRY glMultiTexCoord1bvOES (GLenum texture, const GLbyte *coords);
+GLAPI void APIENTRY glMultiTexCoord2bOES (GLenum texture, GLbyte s, GLbyte t);
+GLAPI void APIENTRY glMultiTexCoord2bvOES (GLenum texture, const GLbyte *coords);
+GLAPI void APIENTRY glMultiTexCoord3bOES (GLenum texture, GLbyte s, GLbyte t, GLbyte r);
+GLAPI void APIENTRY glMultiTexCoord3bvOES (GLenum texture, const GLbyte *coords);
+GLAPI void APIENTRY glMultiTexCoord4bOES (GLenum texture, GLbyte s, GLbyte t, GLbyte r, GLbyte q);
+GLAPI void APIENTRY glMultiTexCoord4bvOES (GLenum texture, const GLbyte *coords);
+GLAPI void APIENTRY glTexCoord1bOES (GLbyte s);
+GLAPI void APIENTRY glTexCoord1bvOES (const GLbyte *coords);
+GLAPI void APIENTRY glTexCoord2bOES (GLbyte s, GLbyte t);
+GLAPI void APIENTRY glTexCoord2bvOES (const GLbyte *coords);
+GLAPI void APIENTRY glTexCoord3bOES (GLbyte s, GLbyte t, GLbyte r);
+GLAPI void APIENTRY glTexCoord3bvOES (const GLbyte *coords);
+GLAPI void APIENTRY glTexCoord4bOES (GLbyte s, GLbyte t, GLbyte r, GLbyte q);
+GLAPI void APIENTRY glTexCoord4bvOES (const GLbyte *coords);
+GLAPI void APIENTRY glVertex2bOES (GLbyte x, GLbyte y);
+GLAPI void APIENTRY glVertex2bvOES (const GLbyte *coords);
+GLAPI void APIENTRY glVertex3bOES (GLbyte x, GLbyte y, GLbyte z);
+GLAPI void APIENTRY glVertex3bvOES (const GLbyte *coords);
+GLAPI void APIENTRY glVertex4bOES (GLbyte x, GLbyte y, GLbyte z, GLbyte w);
+GLAPI void APIENTRY glVertex4bvOES (const GLbyte *coords);
 #endif
+#endif /* GL_OES_byte_coordinates */
 
-#ifndef GL_SGIX_ycrcba
-#define GL_YCRCB_SGIX                     0x8318
-#define GL_YCRCBA_SGIX                    0x8319
+#ifndef GL_OES_compressed_paletted_texture
+#define GL_OES_compressed_paletted_texture 1
+#define GL_PALETTE4_RGB8_OES              0x8B90
+#define GL_PALETTE4_RGBA8_OES             0x8B91
+#define GL_PALETTE4_R5_G6_B5_OES          0x8B92
+#define GL_PALETTE4_RGBA4_OES             0x8B93
+#define GL_PALETTE4_RGB5_A1_OES           0x8B94
+#define GL_PALETTE8_RGB8_OES              0x8B95
+#define GL_PALETTE8_RGBA8_OES             0x8B96
+#define GL_PALETTE8_R5_G6_B5_OES          0x8B97
+#define GL_PALETTE8_RGBA4_OES             0x8B98
+#define GL_PALETTE8_RGB5_A1_OES           0x8B99
+#endif /* GL_OES_compressed_paletted_texture */
+
+#ifndef GL_OES_fixed_point
+#define GL_OES_fixed_point 1
+typedef GLint GLfixed;
+#define GL_FIXED_OES                      0x140C
+typedef void (APIENTRYP PFNGLALPHAFUNCXOESPROC) (GLenum func, GLfixed ref);
+typedef void (APIENTRYP PFNGLCLEARCOLORXOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+typedef void (APIENTRYP PFNGLCLEARDEPTHXOESPROC) (GLfixed depth);
+typedef void (APIENTRYP PFNGLCLIPPLANEXOESPROC) (GLenum plane, const GLfixed *equation);
+typedef void (APIENTRYP PFNGLCOLOR4XOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+typedef void (APIENTRYP PFNGLDEPTHRANGEXOESPROC) (GLfixed n, GLfixed f);
+typedef void (APIENTRYP PFNGLFOGXOESPROC) (GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLFOGXVOESPROC) (GLenum pname, const GLfixed *param);
+typedef void (APIENTRYP PFNGLFRUSTUMXOESPROC) (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
+typedef void (APIENTRYP PFNGLGETCLIPPLANEXOESPROC) (GLenum plane, GLfixed *equation);
+typedef void (APIENTRYP PFNGLGETFIXEDVOESPROC) (GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLGETTEXENVXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLGETTEXPARAMETERXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLLIGHTMODELXOESPROC) (GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLLIGHTMODELXVOESPROC) (GLenum pname, const GLfixed *param);
+typedef void (APIENTRYP PFNGLLIGHTXOESPROC) (GLenum light, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLLIGHTXVOESPROC) (GLenum light, GLenum pname, const GLfixed *params);
+typedef void (APIENTRYP PFNGLLINEWIDTHXOESPROC) (GLfixed width);
+typedef void (APIENTRYP PFNGLLOADMATRIXXOESPROC) (const GLfixed *m);
+typedef void (APIENTRYP PFNGLMATERIALXOESPROC) (GLenum face, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLMATERIALXVOESPROC) (GLenum face, GLenum pname, const GLfixed *param);
+typedef void (APIENTRYP PFNGLMULTMATRIXXOESPROC) (const GLfixed *m);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4XOESPROC) (GLenum texture, GLfixed s, GLfixed t, GLfixed r, GLfixed q);
+typedef void (APIENTRYP PFNGLNORMAL3XOESPROC) (GLfixed nx, GLfixed ny, GLfixed nz);
+typedef void (APIENTRYP PFNGLORTHOXOESPROC) (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERXVOESPROC) (GLenum pname, const GLfixed *params);
+typedef void (APIENTRYP PFNGLPOINTSIZEXOESPROC) (GLfixed size);
+typedef void (APIENTRYP PFNGLPOLYGONOFFSETXOESPROC) (GLfixed factor, GLfixed units);
+typedef void (APIENTRYP PFNGLROTATEXOESPROC) (GLfixed angle, GLfixed x, GLfixed y, GLfixed z);
+typedef void (APIENTRYP PFNGLSAMPLECOVERAGEOESPROC) (GLfixed value, GLboolean invert);
+typedef void (APIENTRYP PFNGLSCALEXOESPROC) (GLfixed x, GLfixed y, GLfixed z);
+typedef void (APIENTRYP PFNGLTEXENVXOESPROC) (GLenum target, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLTEXENVXVOESPROC) (GLenum target, GLenum pname, const GLfixed *params);
+typedef void (APIENTRYP PFNGLTEXPARAMETERXOESPROC) (GLenum target, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLTEXPARAMETERXVOESPROC) (GLenum target, GLenum pname, const GLfixed *params);
+typedef void (APIENTRYP PFNGLTRANSLATEXOESPROC) (GLfixed x, GLfixed y, GLfixed z);
+typedef void (APIENTRYP PFNGLACCUMXOESPROC) (GLenum op, GLfixed value);
+typedef void (APIENTRYP PFNGLBITMAPXOESPROC) (GLsizei width, GLsizei height, GLfixed xorig, GLfixed yorig, GLfixed xmove, GLfixed ymove, const GLubyte *bitmap);
+typedef void (APIENTRYP PFNGLBLENDCOLORXOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+typedef void (APIENTRYP PFNGLCLEARACCUMXOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+typedef void (APIENTRYP PFNGLCOLOR3XOESPROC) (GLfixed red, GLfixed green, GLfixed blue);
+typedef void (APIENTRYP PFNGLCOLOR3XVOESPROC) (const GLfixed *components);
+typedef void (APIENTRYP PFNGLCOLOR4XVOESPROC) (const GLfixed *components);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERXOESPROC) (GLenum target, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERXVOESPROC) (GLenum target, GLenum pname, const GLfixed *params);
+typedef void (APIENTRYP PFNGLEVALCOORD1XOESPROC) (GLfixed u);
+typedef void (APIENTRYP PFNGLEVALCOORD1XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLEVALCOORD2XOESPROC) (GLfixed u, GLfixed v);
+typedef void (APIENTRYP PFNGLEVALCOORD2XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLFEEDBACKBUFFERXOESPROC) (GLsizei n, GLenum type, const GLfixed *buffer);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLGETLIGHTXOESPROC) (GLenum light, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLGETMAPXVOESPROC) (GLenum target, GLenum query, GLfixed *v);
+typedef void (APIENTRYP PFNGLGETMATERIALXOESPROC) (GLenum face, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLGETPIXELMAPXVPROC) (GLenum map, GLint size, GLfixed *values);
+typedef void (APIENTRYP PFNGLGETTEXGENXVOESPROC) (GLenum coord, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLGETTEXLEVELPARAMETERXVOESPROC) (GLenum target, GLint level, GLenum pname, GLfixed *params);
+typedef void (APIENTRYP PFNGLINDEXXOESPROC) (GLfixed component);
+typedef void (APIENTRYP PFNGLINDEXXVOESPROC) (const GLfixed *component);
+typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXXOESPROC) (const GLfixed *m);
+typedef void (APIENTRYP PFNGLMAP1XOESPROC) (GLenum target, GLfixed u1, GLfixed u2, GLint stride, GLint order, GLfixed points);
+typedef void (APIENTRYP PFNGLMAP2XOESPROC) (GLenum target, GLfixed u1, GLfixed u2, GLint ustride, GLint uorder, GLfixed v1, GLfixed v2, GLint vstride, GLint vorder, GLfixed points);
+typedef void (APIENTRYP PFNGLMAPGRID1XOESPROC) (GLint n, GLfixed u1, GLfixed u2);
+typedef void (APIENTRYP PFNGLMAPGRID2XOESPROC) (GLint n, GLfixed u1, GLfixed u2, GLfixed v1, GLfixed v2);
+typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXXOESPROC) (const GLfixed *m);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1XOESPROC) (GLenum texture, GLfixed s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1XVOESPROC) (GLenum texture, const GLfixed *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2XOESPROC) (GLenum texture, GLfixed s, GLfixed t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2XVOESPROC) (GLenum texture, const GLfixed *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3XOESPROC) (GLenum texture, GLfixed s, GLfixed t, GLfixed r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3XVOESPROC) (GLenum texture, const GLfixed *coords);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4XVOESPROC) (GLenum texture, const GLfixed *coords);
+typedef void (APIENTRYP PFNGLNORMAL3XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLPASSTHROUGHXOESPROC) (GLfixed token);
+typedef void (APIENTRYP PFNGLPIXELMAPXPROC) (GLenum map, GLint size, const GLfixed *values);
+typedef void (APIENTRYP PFNGLPIXELSTOREXPROC) (GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLPIXELTRANSFERXOESPROC) (GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLPIXELZOOMXOESPROC) (GLfixed xfactor, GLfixed yfactor);
+typedef void (APIENTRYP PFNGLPRIORITIZETEXTURESXOESPROC) (GLsizei n, const GLuint *textures, const GLfixed *priorities);
+typedef void (APIENTRYP PFNGLRASTERPOS2XOESPROC) (GLfixed x, GLfixed y);
+typedef void (APIENTRYP PFNGLRASTERPOS2XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLRASTERPOS3XOESPROC) (GLfixed x, GLfixed y, GLfixed z);
+typedef void (APIENTRYP PFNGLRASTERPOS3XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLRASTERPOS4XOESPROC) (GLfixed x, GLfixed y, GLfixed z, GLfixed w);
+typedef void (APIENTRYP PFNGLRASTERPOS4XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLRECTXOESPROC) (GLfixed x1, GLfixed y1, GLfixed x2, GLfixed y2);
+typedef void (APIENTRYP PFNGLRECTXVOESPROC) (const GLfixed *v1, const GLfixed *v2);
+typedef void (APIENTRYP PFNGLTEXCOORD1XOESPROC) (GLfixed s);
+typedef void (APIENTRYP PFNGLTEXCOORD1XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD2XOESPROC) (GLfixed s, GLfixed t);
+typedef void (APIENTRYP PFNGLTEXCOORD2XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD3XOESPROC) (GLfixed s, GLfixed t, GLfixed r);
+typedef void (APIENTRYP PFNGLTEXCOORD3XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLTEXCOORD4XOESPROC) (GLfixed s, GLfixed t, GLfixed r, GLfixed q);
+typedef void (APIENTRYP PFNGLTEXCOORD4XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLTEXGENXOESPROC) (GLenum coord, GLenum pname, GLfixed param);
+typedef void (APIENTRYP PFNGLTEXGENXVOESPROC) (GLenum coord, GLenum pname, const GLfixed *params);
+typedef void (APIENTRYP PFNGLVERTEX2XOESPROC) (GLfixed x);
+typedef void (APIENTRYP PFNGLVERTEX2XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLVERTEX3XOESPROC) (GLfixed x, GLfixed y);
+typedef void (APIENTRYP PFNGLVERTEX3XVOESPROC) (const GLfixed *coords);
+typedef void (APIENTRYP PFNGLVERTEX4XOESPROC) (GLfixed x, GLfixed y, GLfixed z);
+typedef void (APIENTRYP PFNGLVERTEX4XVOESPROC) (const GLfixed *coords);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glAlphaFuncxOES (GLenum func, GLfixed ref);
+GLAPI void APIENTRY glClearColorxOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+GLAPI void APIENTRY glClearDepthxOES (GLfixed depth);
+GLAPI void APIENTRY glClipPlanexOES (GLenum plane, const GLfixed *equation);
+GLAPI void APIENTRY glColor4xOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+GLAPI void APIENTRY glDepthRangexOES (GLfixed n, GLfixed f);
+GLAPI void APIENTRY glFogxOES (GLenum pname, GLfixed param);
+GLAPI void APIENTRY glFogxvOES (GLenum pname, const GLfixed *param);
+GLAPI void APIENTRY glFrustumxOES (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
+GLAPI void APIENTRY glGetClipPlanexOES (GLenum plane, GLfixed *equation);
+GLAPI void APIENTRY glGetFixedvOES (GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glGetTexEnvxvOES (GLenum target, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glGetTexParameterxvOES (GLenum target, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glLightModelxOES (GLenum pname, GLfixed param);
+GLAPI void APIENTRY glLightModelxvOES (GLenum pname, const GLfixed *param);
+GLAPI void APIENTRY glLightxOES (GLenum light, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glLightxvOES (GLenum light, GLenum pname, const GLfixed *params);
+GLAPI void APIENTRY glLineWidthxOES (GLfixed width);
+GLAPI void APIENTRY glLoadMatrixxOES (const GLfixed *m);
+GLAPI void APIENTRY glMaterialxOES (GLenum face, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glMaterialxvOES (GLenum face, GLenum pname, const GLfixed *param);
+GLAPI void APIENTRY glMultMatrixxOES (const GLfixed *m);
+GLAPI void APIENTRY glMultiTexCoord4xOES (GLenum texture, GLfixed s, GLfixed t, GLfixed r, GLfixed q);
+GLAPI void APIENTRY glNormal3xOES (GLfixed nx, GLfixed ny, GLfixed nz);
+GLAPI void APIENTRY glOrthoxOES (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
+GLAPI void APIENTRY glPointParameterxvOES (GLenum pname, const GLfixed *params);
+GLAPI void APIENTRY glPointSizexOES (GLfixed size);
+GLAPI void APIENTRY glPolygonOffsetxOES (GLfixed factor, GLfixed units);
+GLAPI void APIENTRY glRotatexOES (GLfixed angle, GLfixed x, GLfixed y, GLfixed z);
+GLAPI void APIENTRY glSampleCoverageOES (GLfixed value, GLboolean invert);
+GLAPI void APIENTRY glScalexOES (GLfixed x, GLfixed y, GLfixed z);
+GLAPI void APIENTRY glTexEnvxOES (GLenum target, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glTexEnvxvOES (GLenum target, GLenum pname, const GLfixed *params);
+GLAPI void APIENTRY glTexParameterxOES (GLenum target, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glTexParameterxvOES (GLenum target, GLenum pname, const GLfixed *params);
+GLAPI void APIENTRY glTranslatexOES (GLfixed x, GLfixed y, GLfixed z);
+GLAPI void APIENTRY glAccumxOES (GLenum op, GLfixed value);
+GLAPI void APIENTRY glBitmapxOES (GLsizei width, GLsizei height, GLfixed xorig, GLfixed yorig, GLfixed xmove, GLfixed ymove, const GLubyte *bitmap);
+GLAPI void APIENTRY glBlendColorxOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+GLAPI void APIENTRY glClearAccumxOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
+GLAPI void APIENTRY glColor3xOES (GLfixed red, GLfixed green, GLfixed blue);
+GLAPI void APIENTRY glColor3xvOES (const GLfixed *components);
+GLAPI void APIENTRY glColor4xvOES (const GLfixed *components);
+GLAPI void APIENTRY glConvolutionParameterxOES (GLenum target, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glConvolutionParameterxvOES (GLenum target, GLenum pname, const GLfixed *params);
+GLAPI void APIENTRY glEvalCoord1xOES (GLfixed u);
+GLAPI void APIENTRY glEvalCoord1xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glEvalCoord2xOES (GLfixed u, GLfixed v);
+GLAPI void APIENTRY glEvalCoord2xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glFeedbackBufferxOES (GLsizei n, GLenum type, const GLfixed *buffer);
+GLAPI void APIENTRY glGetConvolutionParameterxvOES (GLenum target, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glGetHistogramParameterxvOES (GLenum target, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glGetLightxOES (GLenum light, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glGetMapxvOES (GLenum target, GLenum query, GLfixed *v);
+GLAPI void APIENTRY glGetMaterialxOES (GLenum face, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glGetPixelMapxv (GLenum map, GLint size, GLfixed *values);
+GLAPI void APIENTRY glGetTexGenxvOES (GLenum coord, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glGetTexLevelParameterxvOES (GLenum target, GLint level, GLenum pname, GLfixed *params);
+GLAPI void APIENTRY glIndexxOES (GLfixed component);
+GLAPI void APIENTRY glIndexxvOES (const GLfixed *component);
+GLAPI void APIENTRY glLoadTransposeMatrixxOES (const GLfixed *m);
+GLAPI void APIENTRY glMap1xOES (GLenum target, GLfixed u1, GLfixed u2, GLint stride, GLint order, GLfixed points);
+GLAPI void APIENTRY glMap2xOES (GLenum target, GLfixed u1, GLfixed u2, GLint ustride, GLint uorder, GLfixed v1, GLfixed v2, GLint vstride, GLint vorder, GLfixed points);
+GLAPI void APIENTRY glMapGrid1xOES (GLint n, GLfixed u1, GLfixed u2);
+GLAPI void APIENTRY glMapGrid2xOES (GLint n, GLfixed u1, GLfixed u2, GLfixed v1, GLfixed v2);
+GLAPI void APIENTRY glMultTransposeMatrixxOES (const GLfixed *m);
+GLAPI void APIENTRY glMultiTexCoord1xOES (GLenum texture, GLfixed s);
+GLAPI void APIENTRY glMultiTexCoord1xvOES (GLenum texture, const GLfixed *coords);
+GLAPI void APIENTRY glMultiTexCoord2xOES (GLenum texture, GLfixed s, GLfixed t);
+GLAPI void APIENTRY glMultiTexCoord2xvOES (GLenum texture, const GLfixed *coords);
+GLAPI void APIENTRY glMultiTexCoord3xOES (GLenum texture, GLfixed s, GLfixed t, GLfixed r);
+GLAPI void APIENTRY glMultiTexCoord3xvOES (GLenum texture, const GLfixed *coords);
+GLAPI void APIENTRY glMultiTexCoord4xvOES (GLenum texture, const GLfixed *coords);
+GLAPI void APIENTRY glNormal3xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glPassThroughxOES (GLfixed token);
+GLAPI void APIENTRY glPixelMapx (GLenum map, GLint size, const GLfixed *values);
+GLAPI void APIENTRY glPixelStorex (GLenum pname, GLfixed param);
+GLAPI void APIENTRY glPixelTransferxOES (GLenum pname, GLfixed param);
+GLAPI void APIENTRY glPixelZoomxOES (GLfixed xfactor, GLfixed yfactor);
+GLAPI void APIENTRY glPrioritizeTexturesxOES (GLsizei n, const GLuint *textures, const GLfixed *priorities);
+GLAPI void APIENTRY glRasterPos2xOES (GLfixed x, GLfixed y);
+GLAPI void APIENTRY glRasterPos2xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glRasterPos3xOES (GLfixed x, GLfixed y, GLfixed z);
+GLAPI void APIENTRY glRasterPos3xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glRasterPos4xOES (GLfixed x, GLfixed y, GLfixed z, GLfixed w);
+GLAPI void APIENTRY glRasterPos4xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glRectxOES (GLfixed x1, GLfixed y1, GLfixed x2, GLfixed y2);
+GLAPI void APIENTRY glRectxvOES (const GLfixed *v1, const GLfixed *v2);
+GLAPI void APIENTRY glTexCoord1xOES (GLfixed s);
+GLAPI void APIENTRY glTexCoord1xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glTexCoord2xOES (GLfixed s, GLfixed t);
+GLAPI void APIENTRY glTexCoord2xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glTexCoord3xOES (GLfixed s, GLfixed t, GLfixed r);
+GLAPI void APIENTRY glTexCoord3xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glTexCoord4xOES (GLfixed s, GLfixed t, GLfixed r, GLfixed q);
+GLAPI void APIENTRY glTexCoord4xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glTexGenxOES (GLenum coord, GLenum pname, GLfixed param);
+GLAPI void APIENTRY glTexGenxvOES (GLenum coord, GLenum pname, const GLfixed *params);
+GLAPI void APIENTRY glVertex2xOES (GLfixed x);
+GLAPI void APIENTRY glVertex2xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glVertex3xOES (GLfixed x, GLfixed y);
+GLAPI void APIENTRY glVertex3xvOES (const GLfixed *coords);
+GLAPI void APIENTRY glVertex4xOES (GLfixed x, GLfixed y, GLfixed z);
+GLAPI void APIENTRY glVertex4xvOES (const GLfixed *coords);
 #endif
+#endif /* GL_OES_fixed_point */
 
-#ifndef GL_SGI_depth_pass_instrument
-#define GL_DEPTH_PASS_INSTRUMENT_SGIX     0x8310
-#define GL_DEPTH_PASS_INSTRUMENT_COUNTERS_SGIX 0x8311
-#define GL_DEPTH_PASS_INSTRUMENT_MAX_SGIX 0x8312
+#ifndef GL_OES_query_matrix
+#define GL_OES_query_matrix 1
+typedef GLbitfield (APIENTRYP PFNGLQUERYMATRIXXOESPROC) (GLfixed *mantissa, GLint *exponent);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLbitfield APIENTRY glQueryMatrixxOES (GLfixed *mantissa, GLint *exponent);
 #endif
+#endif /* GL_OES_query_matrix */
 
-#ifndef GL_3DFX_texture_compression_FXT1
-#define GL_COMPRESSED_RGB_FXT1_3DFX       0x86B0
-#define GL_COMPRESSED_RGBA_FXT1_3DFX      0x86B1
+#ifndef GL_OES_read_format
+#define GL_OES_read_format 1
+#define GL_IMPLEMENTATION_COLOR_READ_TYPE_OES 0x8B9A
+#define GL_IMPLEMENTATION_COLOR_READ_FORMAT_OES 0x8B9B
+#endif /* GL_OES_read_format */
+
+#ifndef GL_OES_single_precision
+#define GL_OES_single_precision 1
+typedef void (APIENTRYP PFNGLCLEARDEPTHFOESPROC) (GLclampf depth);
+typedef void (APIENTRYP PFNGLCLIPPLANEFOESPROC) (GLenum plane, const GLfloat *equation);
+typedef void (APIENTRYP PFNGLDEPTHRANGEFOESPROC) (GLclampf n, GLclampf f);
+typedef void (APIENTRYP PFNGLFRUSTUMFOESPROC) (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
+typedef void (APIENTRYP PFNGLGETCLIPPLANEFOESPROC) (GLenum plane, GLfloat *equation);
+typedef void (APIENTRYP PFNGLORTHOFOESPROC) (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glClearDepthfOES (GLclampf depth);
+GLAPI void APIENTRY glClipPlanefOES (GLenum plane, const GLfloat *equation);
+GLAPI void APIENTRY glDepthRangefOES (GLclampf n, GLclampf f);
+GLAPI void APIENTRY glFrustumfOES (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
+GLAPI void APIENTRY glGetClipPlanefOES (GLenum plane, GLfloat *equation);
+GLAPI void APIENTRY glOrthofOES (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
 #endif
+#endif /* GL_OES_single_precision */
 
 #ifndef GL_3DFX_multisample
+#define GL_3DFX_multisample 1
 #define GL_MULTISAMPLE_3DFX               0x86B2
 #define GL_SAMPLE_BUFFERS_3DFX            0x86B3
 #define GL_SAMPLES_3DFX                   0x86B4
 #define GL_MULTISAMPLE_BIT_3DFX           0x20000000
-#endif
+#endif /* GL_3DFX_multisample */
 
 #ifndef GL_3DFX_tbuffer
+#define GL_3DFX_tbuffer 1
+typedef void (APIENTRYP PFNGLTBUFFERMASK3DFXPROC) (GLuint mask);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTbufferMask3DFX (GLuint mask);
 #endif
+#endif /* GL_3DFX_tbuffer */
 
-#ifndef GL_EXT_multisample
-#define GL_MULTISAMPLE_EXT                0x809D
-#define GL_SAMPLE_ALPHA_TO_MASK_EXT       0x809E
-#define GL_SAMPLE_ALPHA_TO_ONE_EXT        0x809F
-#define GL_SAMPLE_MASK_EXT                0x80A0
-#define GL_1PASS_EXT                      0x80A1
-#define GL_2PASS_0_EXT                    0x80A2
-#define GL_2PASS_1_EXT                    0x80A3
-#define GL_4PASS_0_EXT                    0x80A4
-#define GL_4PASS_1_EXT                    0x80A5
-#define GL_4PASS_2_EXT                    0x80A6
-#define GL_4PASS_3_EXT                    0x80A7
-#define GL_SAMPLE_BUFFERS_EXT             0x80A8
-#define GL_SAMPLES_EXT                    0x80A9
-#define GL_SAMPLE_MASK_VALUE_EXT          0x80AA
-#define GL_SAMPLE_MASK_INVERT_EXT         0x80AB
-#define GL_SAMPLE_PATTERN_EXT             0x80AC
-#define GL_MULTISAMPLE_BIT_EXT            0x20000000
-#endif
+#ifndef GL_3DFX_texture_compression_FXT1
+#define GL_3DFX_texture_compression_FXT1 1
+#define GL_COMPRESSED_RGB_FXT1_3DFX       0x86B0
+#define GL_COMPRESSED_RGBA_FXT1_3DFX      0x86B1
+#endif /* GL_3DFX_texture_compression_FXT1 */
 
-#ifndef GL_SGIX_vertex_preclip
-#define GL_VERTEX_PRECLIP_SGIX            0x83EE
-#define GL_VERTEX_PRECLIP_HINT_SGIX       0x83EF
-#endif
+#ifndef GL_AMD_blend_minmax_factor
+#define GL_AMD_blend_minmax_factor 1
+#define GL_FACTOR_MIN_AMD                 0x901C
+#define GL_FACTOR_MAX_AMD                 0x901D
+#endif /* GL_AMD_blend_minmax_factor */
 
-#ifndef GL_SGIX_convolution_accuracy
-#define GL_CONVOLUTION_HINT_SGIX          0x8316
-#endif
+#ifndef GL_AMD_conservative_depth
+#define GL_AMD_conservative_depth 1
+#endif /* GL_AMD_conservative_depth */
 
-#ifndef GL_SGIX_resample
-#define GL_PACK_RESAMPLE_SGIX             0x842C
-#define GL_UNPACK_RESAMPLE_SGIX           0x842D
-#define GL_RESAMPLE_REPLICATE_SGIX        0x842E
-#define GL_RESAMPLE_ZERO_FILL_SGIX        0x842F
-#define GL_RESAMPLE_DECIMATE_SGIX         0x8430
+#ifndef GL_AMD_debug_output
+#define GL_AMD_debug_output 1
+typedef void (APIENTRY  *GLDEBUGPROCAMD)(GLuint id,GLenum category,GLenum severity,GLsizei length,const GLchar *message,void *userParam);
+#define GL_MAX_DEBUG_MESSAGE_LENGTH_AMD   0x9143
+#define GL_MAX_DEBUG_LOGGED_MESSAGES_AMD  0x9144
+#define GL_DEBUG_LOGGED_MESSAGES_AMD      0x9145
+#define GL_DEBUG_SEVERITY_HIGH_AMD        0x9146
+#define GL_DEBUG_SEVERITY_MEDIUM_AMD      0x9147
+#define GL_DEBUG_SEVERITY_LOW_AMD         0x9148
+#define GL_DEBUG_CATEGORY_API_ERROR_AMD   0x9149
+#define GL_DEBUG_CATEGORY_WINDOW_SYSTEM_AMD 0x914A
+#define GL_DEBUG_CATEGORY_DEPRECATION_AMD 0x914B
+#define GL_DEBUG_CATEGORY_UNDEFINED_BEHAVIOR_AMD 0x914C
+#define GL_DEBUG_CATEGORY_PERFORMANCE_AMD 0x914D
+#define GL_DEBUG_CATEGORY_SHADER_COMPILER_AMD 0x914E
+#define GL_DEBUG_CATEGORY_APPLICATION_AMD 0x914F
+#define GL_DEBUG_CATEGORY_OTHER_AMD       0x9150
+typedef void (APIENTRYP PFNGLDEBUGMESSAGEENABLEAMDPROC) (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTAMDPROC) (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf);
+typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKAMDPROC) (GLDEBUGPROCAMD callback, void *userParam);
+typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGAMDPROC) (GLuint count, GLsizei bufsize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDebugMessageEnableAMD (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
+GLAPI void APIENTRY glDebugMessageInsertAMD (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf);
+GLAPI void APIENTRY glDebugMessageCallbackAMD (GLDEBUGPROCAMD callback, void *userParam);
+GLAPI GLuint APIENTRY glGetDebugMessageLogAMD (GLuint count, GLsizei bufsize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
 #endif
+#endif /* GL_AMD_debug_output */
 
-#ifndef GL_SGIS_point_line_texgen
-#define GL_EYE_DISTANCE_TO_POINT_SGIS     0x81F0
-#define GL_OBJECT_DISTANCE_TO_POINT_SGIS  0x81F1
-#define GL_EYE_DISTANCE_TO_LINE_SGIS      0x81F2
-#define GL_OBJECT_DISTANCE_TO_LINE_SGIS   0x81F3
-#define GL_EYE_POINT_SGIS                 0x81F4
-#define GL_OBJECT_POINT_SGIS              0x81F5
-#define GL_EYE_LINE_SGIS                  0x81F6
-#define GL_OBJECT_LINE_SGIS               0x81F7
+#ifndef GL_AMD_depth_clamp_separate
+#define GL_AMD_depth_clamp_separate 1
+#define GL_DEPTH_CLAMP_NEAR_AMD           0x901E
+#define GL_DEPTH_CLAMP_FAR_AMD            0x901F
+#endif /* GL_AMD_depth_clamp_separate */
+
+#ifndef GL_AMD_draw_buffers_blend
+#define GL_AMD_draw_buffers_blend 1
+typedef void (APIENTRYP PFNGLBLENDFUNCINDEXEDAMDPROC) (GLuint buf, GLenum src, GLenum dst);
+typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEINDEXEDAMDPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+typedef void (APIENTRYP PFNGLBLENDEQUATIONINDEXEDAMDPROC) (GLuint buf, GLenum mode);
+typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEINDEXEDAMDPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendFuncIndexedAMD (GLuint buf, GLenum src, GLenum dst);
+GLAPI void APIENTRY glBlendFuncSeparateIndexedAMD (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+GLAPI void APIENTRY glBlendEquationIndexedAMD (GLuint buf, GLenum mode);
+GLAPI void APIENTRY glBlendEquationSeparateIndexedAMD (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
 #endif
+#endif /* GL_AMD_draw_buffers_blend */
 
-#ifndef GL_SGIS_texture_color_mask
-#define GL_TEXTURE_COLOR_WRITEMASK_SGIS   0x81EF
+#ifndef GL_AMD_gcn_shader
+#define GL_AMD_gcn_shader 1
+#endif /* GL_AMD_gcn_shader */
+
+#ifndef GL_AMD_gpu_shader_int64
+#define GL_AMD_gpu_shader_int64 1
+typedef int64_t GLint64EXT;
+#define GL_INT64_NV                       0x140E
+#define GL_UNSIGNED_INT64_NV              0x140F
+#define GL_INT8_NV                        0x8FE0
+#define GL_INT8_VEC2_NV                   0x8FE1
+#define GL_INT8_VEC3_NV                   0x8FE2
+#define GL_INT8_VEC4_NV                   0x8FE3
+#define GL_INT16_NV                       0x8FE4
+#define GL_INT16_VEC2_NV                  0x8FE5
+#define GL_INT16_VEC3_NV                  0x8FE6
+#define GL_INT16_VEC4_NV                  0x8FE7
+#define GL_INT64_VEC2_NV                  0x8FE9
+#define GL_INT64_VEC3_NV                  0x8FEA
+#define GL_INT64_VEC4_NV                  0x8FEB
+#define GL_UNSIGNED_INT8_NV               0x8FEC
+#define GL_UNSIGNED_INT8_VEC2_NV          0x8FED
+#define GL_UNSIGNED_INT8_VEC3_NV          0x8FEE
+#define GL_UNSIGNED_INT8_VEC4_NV          0x8FEF
+#define GL_UNSIGNED_INT16_NV              0x8FF0
+#define GL_UNSIGNED_INT16_VEC2_NV         0x8FF1
+#define GL_UNSIGNED_INT16_VEC3_NV         0x8FF2
+#define GL_UNSIGNED_INT16_VEC4_NV         0x8FF3
+#define GL_UNSIGNED_INT64_VEC2_NV         0x8FF5
+#define GL_UNSIGNED_INT64_VEC3_NV         0x8FF6
+#define GL_UNSIGNED_INT64_VEC4_NV         0x8FF7
+#define GL_FLOAT16_NV                     0x8FF8
+#define GL_FLOAT16_VEC2_NV                0x8FF9
+#define GL_FLOAT16_VEC3_NV                0x8FFA
+#define GL_FLOAT16_VEC4_NV                0x8FFB
+typedef void (APIENTRYP PFNGLUNIFORM1I64NVPROC) (GLint location, GLint64EXT x);
+typedef void (APIENTRYP PFNGLUNIFORM2I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y);
+typedef void (APIENTRYP PFNGLUNIFORM3I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
+typedef void (APIENTRYP PFNGLUNIFORM4I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
+typedef void (APIENTRYP PFNGLUNIFORM1I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM2I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM3I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM4I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM1UI64NVPROC) (GLint location, GLuint64EXT x);
+typedef void (APIENTRYP PFNGLUNIFORM2UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y);
+typedef void (APIENTRYP PFNGLUNIFORM3UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
+typedef void (APIENTRYP PFNGLUNIFORM4UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
+typedef void (APIENTRYP PFNGLUNIFORM1UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM2UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM3UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLUNIFORM4UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLGETUNIFORMI64VNVPROC) (GLuint program, GLint location, GLint64EXT *params);
+typedef void (APIENTRYP PFNGLGETUNIFORMUI64VNVPROC) (GLuint program, GLint location, GLuint64EXT *params);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1I64NVPROC) (GLuint program, GLint location, GLint64EXT x);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glUniform1i64NV (GLint location, GLint64EXT x);
+GLAPI void APIENTRY glUniform2i64NV (GLint location, GLint64EXT x, GLint64EXT y);
+GLAPI void APIENTRY glUniform3i64NV (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
+GLAPI void APIENTRY glUniform4i64NV (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
+GLAPI void APIENTRY glUniform1i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glUniform2i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glUniform3i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glUniform4i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glUniform1ui64NV (GLint location, GLuint64EXT x);
+GLAPI void APIENTRY glUniform2ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y);
+GLAPI void APIENTRY glUniform3ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
+GLAPI void APIENTRY glUniform4ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
+GLAPI void APIENTRY glUniform1ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glUniform2ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glUniform3ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glUniform4ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glGetUniformi64vNV (GLuint program, GLint location, GLint64EXT *params);
+GLAPI void APIENTRY glGetUniformui64vNV (GLuint program, GLint location, GLuint64EXT *params);
+GLAPI void APIENTRY glProgramUniform1i64NV (GLuint program, GLint location, GLint64EXT x);
+GLAPI void APIENTRY glProgramUniform2i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y);
+GLAPI void APIENTRY glProgramUniform3i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
+GLAPI void APIENTRY glProgramUniform4i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
+GLAPI void APIENTRY glProgramUniform1i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glProgramUniform2i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glProgramUniform3i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glProgramUniform4i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
+GLAPI void APIENTRY glProgramUniform1ui64NV (GLuint program, GLint location, GLuint64EXT x);
+GLAPI void APIENTRY glProgramUniform2ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y);
+GLAPI void APIENTRY glProgramUniform3ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
+GLAPI void APIENTRY glProgramUniform4ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
+GLAPI void APIENTRY glProgramUniform1ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glProgramUniform2ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glProgramUniform3ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glProgramUniform4ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
 #endif
+#endif /* GL_AMD_gpu_shader_int64 */
 
-#ifndef GL_EXT_texture_env_dot3
-#define GL_DOT3_RGB_EXT                   0x8740
-#define GL_DOT3_RGBA_EXT                  0x8741
+#ifndef GL_AMD_interleaved_elements
+#define GL_AMD_interleaved_elements 1
+#define GL_VERTEX_ELEMENT_SWIZZLE_AMD     0x91A4
+#define GL_VERTEX_ID_SWIZZLE_AMD          0x91A5
+typedef void (APIENTRYP PFNGLVERTEXATTRIBPARAMETERIAMDPROC) (GLuint index, GLenum pname, GLint param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexAttribParameteriAMD (GLuint index, GLenum pname, GLint param);
 #endif
+#endif /* GL_AMD_interleaved_elements */
 
-#ifndef GL_ATI_texture_mirror_once
-#define GL_MIRROR_CLAMP_ATI               0x8742
-#define GL_MIRROR_CLAMP_TO_EDGE_ATI       0x8743
+#ifndef GL_AMD_multi_draw_indirect
+#define GL_AMD_multi_draw_indirect 1
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTAMDPROC) (GLenum mode, const void *indirect, GLsizei primcount, GLsizei stride);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTAMDPROC) (GLenum mode, GLenum type, const void *indirect, GLsizei primcount, GLsizei stride);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiDrawArraysIndirectAMD (GLenum mode, const void *indirect, GLsizei primcount, GLsizei stride);
+GLAPI void APIENTRY glMultiDrawElementsIndirectAMD (GLenum mode, GLenum type, const void *indirect, GLsizei primcount, GLsizei stride);
 #endif
+#endif /* GL_AMD_multi_draw_indirect */
 
-#ifndef GL_NV_fence
-#define GL_ALL_COMPLETED_NV               0x84F2
-#define GL_FENCE_STATUS_NV                0x84F3
-#define GL_FENCE_CONDITION_NV             0x84F4
+#ifndef GL_AMD_name_gen_delete
+#define GL_AMD_name_gen_delete 1
+#define GL_DATA_BUFFER_AMD                0x9151
+#define GL_PERFORMANCE_MONITOR_AMD        0x9152
+#define GL_QUERY_OBJECT_AMD               0x9153
+#define GL_VERTEX_ARRAY_OBJECT_AMD        0x9154
+#define GL_SAMPLER_OBJECT_AMD             0x9155
+typedef void (APIENTRYP PFNGLGENNAMESAMDPROC) (GLenum identifier, GLuint num, GLuint *names);
+typedef void (APIENTRYP PFNGLDELETENAMESAMDPROC) (GLenum identifier, GLuint num, const GLuint *names);
+typedef GLboolean (APIENTRYP PFNGLISNAMEAMDPROC) (GLenum identifier, GLuint name);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGenNamesAMD (GLenum identifier, GLuint num, GLuint *names);
+GLAPI void APIENTRY glDeleteNamesAMD (GLenum identifier, GLuint num, const GLuint *names);
+GLAPI GLboolean APIENTRY glIsNameAMD (GLenum identifier, GLuint name);
 #endif
+#endif /* GL_AMD_name_gen_delete */
 
-#ifndef GL_IBM_texture_mirrored_repeat
-#define GL_MIRRORED_REPEAT_IBM            0x8370
+#ifndef GL_AMD_occlusion_query_event
+#define GL_AMD_occlusion_query_event 1
+#define GL_OCCLUSION_QUERY_EVENT_MASK_AMD 0x874F
+#define GL_QUERY_DEPTH_PASS_EVENT_BIT_AMD 0x00000001
+#define GL_QUERY_DEPTH_FAIL_EVENT_BIT_AMD 0x00000002
+#define GL_QUERY_STENCIL_FAIL_EVENT_BIT_AMD 0x00000004
+#define GL_QUERY_DEPTH_BOUNDS_FAIL_EVENT_BIT_AMD 0x00000008
+#define GL_QUERY_ALL_EVENT_BITS_AMD       0xFFFFFFFF
+typedef void (APIENTRYP PFNGLQUERYOBJECTPARAMETERUIAMDPROC) (GLenum target, GLuint id, GLenum pname, GLuint param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glQueryObjectParameteruiAMD (GLenum target, GLuint id, GLenum pname, GLuint param);
 #endif
+#endif /* GL_AMD_occlusion_query_event */
 
-#ifndef GL_NV_evaluators
-#define GL_EVAL_2D_NV                     0x86C0
-#define GL_EVAL_TRIANGULAR_2D_NV          0x86C1
-#define GL_MAP_TESSELLATION_NV            0x86C2
-#define GL_MAP_ATTRIB_U_ORDER_NV          0x86C3
-#define GL_MAP_ATTRIB_V_ORDER_NV          0x86C4
-#define GL_EVAL_FRACTIONAL_TESSELLATION_NV 0x86C5
-#define GL_EVAL_VERTEX_ATTRIB0_NV         0x86C6
-#define GL_EVAL_VERTEX_ATTRIB1_NV         0x86C7
-#define GL_EVAL_VERTEX_ATTRIB2_NV         0x86C8
-#define GL_EVAL_VERTEX_ATTRIB3_NV         0x86C9
-#define GL_EVAL_VERTEX_ATTRIB4_NV         0x86CA
-#define GL_EVAL_VERTEX_ATTRIB5_NV         0x86CB
-#define GL_EVAL_VERTEX_ATTRIB6_NV         0x86CC
-#define GL_EVAL_VERTEX_ATTRIB7_NV         0x86CD
-#define GL_EVAL_VERTEX_ATTRIB8_NV         0x86CE
-#define GL_EVAL_VERTEX_ATTRIB9_NV         0x86CF
-#define GL_EVAL_VERTEX_ATTRIB10_NV        0x86D0
-#define GL_EVAL_VERTEX_ATTRIB11_NV        0x86D1
-#define GL_EVAL_VERTEX_ATTRIB12_NV        0x86D2
-#define GL_EVAL_VERTEX_ATTRIB13_NV        0x86D3
-#define GL_EVAL_VERTEX_ATTRIB14_NV        0x86D4
-#define GL_EVAL_VERTEX_ATTRIB15_NV        0x86D5
-#define GL_MAX_MAP_TESSELLATION_NV        0x86D6
-#define GL_MAX_RATIONAL_EVAL_ORDER_NV     0x86D7
+#ifndef GL_AMD_performance_monitor
+#define GL_AMD_performance_monitor 1
+#define GL_COUNTER_TYPE_AMD               0x8BC0
+#define GL_COUNTER_RANGE_AMD              0x8BC1
+#define GL_UNSIGNED_INT64_AMD             0x8BC2
+#define GL_PERCENTAGE_AMD                 0x8BC3
+#define GL_PERFMON_RESULT_AVAILABLE_AMD   0x8BC4
+#define GL_PERFMON_RESULT_SIZE_AMD        0x8BC5
+#define GL_PERFMON_RESULT_AMD             0x8BC6
+typedef void (APIENTRYP PFNGLGETPERFMONITORGROUPSAMDPROC) (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
+typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERSAMDPROC) (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
+typedef void (APIENTRYP PFNGLGETPERFMONITORGROUPSTRINGAMDPROC) (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
+typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERSTRINGAMDPROC) (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
+typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERINFOAMDPROC) (GLuint group, GLuint counter, GLenum pname, void *data);
+typedef void (APIENTRYP PFNGLGENPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
+typedef void (APIENTRYP PFNGLDELETEPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
+typedef void (APIENTRYP PFNGLSELECTPERFMONITORCOUNTERSAMDPROC) (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList);
+typedef void (APIENTRYP PFNGLBEGINPERFMONITORAMDPROC) (GLuint monitor);
+typedef void (APIENTRYP PFNGLENDPERFMONITORAMDPROC) (GLuint monitor);
+typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERDATAAMDPROC) (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGetPerfMonitorGroupsAMD (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
+GLAPI void APIENTRY glGetPerfMonitorCountersAMD (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
+GLAPI void APIENTRY glGetPerfMonitorGroupStringAMD (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
+GLAPI void APIENTRY glGetPerfMonitorCounterStringAMD (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
+GLAPI void APIENTRY glGetPerfMonitorCounterInfoAMD (GLuint group, GLuint counter, GLenum pname, void *data);
+GLAPI void APIENTRY glGenPerfMonitorsAMD (GLsizei n, GLuint *monitors);
+GLAPI void APIENTRY glDeletePerfMonitorsAMD (GLsizei n, GLuint *monitors);
+GLAPI void APIENTRY glSelectPerfMonitorCountersAMD (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList);
+GLAPI void APIENTRY glBeginPerfMonitorAMD (GLuint monitor);
+GLAPI void APIENTRY glEndPerfMonitorAMD (GLuint monitor);
+GLAPI void APIENTRY glGetPerfMonitorCounterDataAMD (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
 #endif
+#endif /* GL_AMD_performance_monitor */
 
-#ifndef GL_NV_packed_depth_stencil
-#define GL_DEPTH_STENCIL_NV               0x84F9
-#define GL_UNSIGNED_INT_24_8_NV           0x84FA
+#ifndef GL_AMD_pinned_memory
+#define GL_AMD_pinned_memory 1
+#define GL_EXTERNAL_VIRTUAL_MEMORY_BUFFER_AMD 0x9160
+#endif /* GL_AMD_pinned_memory */
+
+#ifndef GL_AMD_query_buffer_object
+#define GL_AMD_query_buffer_object 1
+#define GL_QUERY_BUFFER_AMD               0x9192
+#define GL_QUERY_BUFFER_BINDING_AMD       0x9193
+#define GL_QUERY_RESULT_NO_WAIT_AMD       0x9194
+#endif /* GL_AMD_query_buffer_object */
+
+#ifndef GL_AMD_sample_positions
+#define GL_AMD_sample_positions 1
+#define GL_SUBSAMPLE_DISTANCE_AMD         0x883F
+typedef void (APIENTRYP PFNGLSETMULTISAMPLEFVAMDPROC) (GLenum pname, GLuint index, const GLfloat *val);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glSetMultisamplefvAMD (GLenum pname, GLuint index, const GLfloat *val);
 #endif
+#endif /* GL_AMD_sample_positions */
 
-#ifndef GL_NV_register_combiners2
-#define GL_PER_STAGE_CONSTANTS_NV         0x8535
+#ifndef GL_AMD_seamless_cubemap_per_texture
+#define GL_AMD_seamless_cubemap_per_texture 1
+#endif /* GL_AMD_seamless_cubemap_per_texture */
+
+#ifndef GL_AMD_shader_atomic_counter_ops
+#define GL_AMD_shader_atomic_counter_ops 1
+#endif /* GL_AMD_shader_atomic_counter_ops */
+
+#ifndef GL_AMD_shader_stencil_export
+#define GL_AMD_shader_stencil_export 1
+#endif /* GL_AMD_shader_stencil_export */
+
+#ifndef GL_AMD_shader_trinary_minmax
+#define GL_AMD_shader_trinary_minmax 1
+#endif /* GL_AMD_shader_trinary_minmax */
+
+#ifndef GL_AMD_sparse_texture
+#define GL_AMD_sparse_texture 1
+#define GL_VIRTUAL_PAGE_SIZE_X_AMD        0x9195
+#define GL_VIRTUAL_PAGE_SIZE_Y_AMD        0x9196
+#define GL_VIRTUAL_PAGE_SIZE_Z_AMD        0x9197
+#define GL_MAX_SPARSE_TEXTURE_SIZE_AMD    0x9198
+#define GL_MAX_SPARSE_3D_TEXTURE_SIZE_AMD 0x9199
+#define GL_MAX_SPARSE_ARRAY_TEXTURE_LAYERS 0x919A
+#define GL_MIN_SPARSE_LEVEL_AMD           0x919B
+#define GL_MIN_LOD_WARNING_AMD            0x919C
+#define GL_TEXTURE_STORAGE_SPARSE_BIT_AMD 0x00000001
+typedef void (APIENTRYP PFNGLTEXSTORAGESPARSEAMDPROC) (GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGESPARSEAMDPROC) (GLuint texture, GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexStorageSparseAMD (GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
+GLAPI void APIENTRY glTextureStorageSparseAMD (GLuint texture, GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
 #endif
+#endif /* GL_AMD_sparse_texture */
 
-#ifndef GL_NV_texture_compression_vtc
+#ifndef GL_AMD_stencil_operation_extended
+#define GL_AMD_stencil_operation_extended 1
+#define GL_SET_AMD                        0x874A
+#define GL_REPLACE_VALUE_AMD              0x874B
+#define GL_STENCIL_OP_VALUE_AMD           0x874C
+#define GL_STENCIL_BACK_OP_VALUE_AMD      0x874D
+typedef void (APIENTRYP PFNGLSTENCILOPVALUEAMDPROC) (GLenum face, GLuint value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glStencilOpValueAMD (GLenum face, GLuint value);
 #endif
+#endif /* GL_AMD_stencil_operation_extended */
 
-#ifndef GL_NV_texture_rectangle
-#define GL_TEXTURE_RECTANGLE_NV           0x84F5
-#define GL_TEXTURE_BINDING_RECTANGLE_NV   0x84F6
-#define GL_PROXY_TEXTURE_RECTANGLE_NV     0x84F7
-#define GL_MAX_RECTANGLE_TEXTURE_SIZE_NV  0x84F8
+#ifndef GL_AMD_texture_texture4
+#define GL_AMD_texture_texture4 1
+#endif /* GL_AMD_texture_texture4 */
+
+#ifndef GL_AMD_transform_feedback3_lines_triangles
+#define GL_AMD_transform_feedback3_lines_triangles 1
+#endif /* GL_AMD_transform_feedback3_lines_triangles */
+
+#ifndef GL_AMD_transform_feedback4
+#define GL_AMD_transform_feedback4 1
+#define GL_STREAM_RASTERIZATION_AMD       0x91A0
+#endif /* GL_AMD_transform_feedback4 */
+
+#ifndef GL_AMD_vertex_shader_layer
+#define GL_AMD_vertex_shader_layer 1
+#endif /* GL_AMD_vertex_shader_layer */
+
+#ifndef GL_AMD_vertex_shader_tessellator
+#define GL_AMD_vertex_shader_tessellator 1
+#define GL_SAMPLER_BUFFER_AMD             0x9001
+#define GL_INT_SAMPLER_BUFFER_AMD         0x9002
+#define GL_UNSIGNED_INT_SAMPLER_BUFFER_AMD 0x9003
+#define GL_TESSELLATION_MODE_AMD          0x9004
+#define GL_TESSELLATION_FACTOR_AMD        0x9005
+#define GL_DISCRETE_AMD                   0x9006
+#define GL_CONTINUOUS_AMD                 0x9007
+typedef void (APIENTRYP PFNGLTESSELLATIONFACTORAMDPROC) (GLfloat factor);
+typedef void (APIENTRYP PFNGLTESSELLATIONMODEAMDPROC) (GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTessellationFactorAMD (GLfloat factor);
+GLAPI void APIENTRY glTessellationModeAMD (GLenum mode);
 #endif
+#endif /* GL_AMD_vertex_shader_tessellator */
 
-#ifndef GL_NV_texture_shader
-#define GL_OFFSET_TEXTURE_RECTANGLE_NV    0x864C
-#define GL_OFFSET_TEXTURE_RECTANGLE_SCALE_NV 0x864D
-#define GL_DOT_PRODUCT_TEXTURE_RECTANGLE_NV 0x864E
-#define GL_RGBA_UNSIGNED_DOT_PRODUCT_MAPPING_NV 0x86D9
-#define GL_UNSIGNED_INT_S8_S8_8_8_NV      0x86DA
-#define GL_UNSIGNED_INT_8_8_S8_S8_REV_NV  0x86DB
-#define GL_DSDT_MAG_INTENSITY_NV          0x86DC
-#define GL_SHADER_CONSISTENT_NV           0x86DD
-#define GL_TEXTURE_SHADER_NV              0x86DE
-#define GL_SHADER_OPERATION_NV            0x86DF
-#define GL_CULL_MODES_NV                  0x86E0
-#define GL_OFFSET_TEXTURE_MATRIX_NV       0x86E1
-#define GL_OFFSET_TEXTURE_SCALE_NV        0x86E2
-#define GL_OFFSET_TEXTURE_BIAS_NV         0x86E3
-#define GL_OFFSET_TEXTURE_2D_MATRIX_NV    GL_OFFSET_TEXTURE_MATRIX_NV
-#define GL_OFFSET_TEXTURE_2D_SCALE_NV     GL_OFFSET_TEXTURE_SCALE_NV
-#define GL_OFFSET_TEXTURE_2D_BIAS_NV      GL_OFFSET_TEXTURE_BIAS_NV
-#define GL_PREVIOUS_TEXTURE_INPUT_NV      0x86E4
-#define GL_CONST_EYE_NV                   0x86E5
-#define GL_PASS_THROUGH_NV                0x86E6
-#define GL_CULL_FRAGMENT_NV               0x86E7
-#define GL_OFFSET_TEXTURE_2D_NV           0x86E8
-#define GL_DEPENDENT_AR_TEXTURE_2D_NV     0x86E9
-#define GL_DEPENDENT_GB_TEXTURE_2D_NV     0x86EA
-#define GL_DOT_PRODUCT_NV                 0x86EC
-#define GL_DOT_PRODUCT_DEPTH_REPLACE_NV   0x86ED
-#define GL_DOT_PRODUCT_TEXTURE_2D_NV      0x86EE
-#define GL_DOT_PRODUCT_TEXTURE_CUBE_MAP_NV 0x86F0
-#define GL_DOT_PRODUCT_DIFFUSE_CUBE_MAP_NV 0x86F1
-#define GL_DOT_PRODUCT_REFLECT_CUBE_MAP_NV 0x86F2
-#define GL_DOT_PRODUCT_CONST_EYE_REFLECT_CUBE_MAP_NV 0x86F3
-#define GL_HILO_NV                        0x86F4
-#define GL_DSDT_NV                        0x86F5
-#define GL_DSDT_MAG_NV                    0x86F6
-#define GL_DSDT_MAG_VIB_NV                0x86F7
-#define GL_HILO16_NV                      0x86F8
-#define GL_SIGNED_HILO_NV                 0x86F9
-#define GL_SIGNED_HILO16_NV               0x86FA
-#define GL_SIGNED_RGBA_NV                 0x86FB
-#define GL_SIGNED_RGBA8_NV                0x86FC
-#define GL_SIGNED_RGB_NV                  0x86FE
-#define GL_SIGNED_RGB8_NV                 0x86FF
-#define GL_SIGNED_LUMINANCE_NV            0x8701
-#define GL_SIGNED_LUMINANCE8_NV           0x8702
-#define GL_SIGNED_LUMINANCE_ALPHA_NV      0x8703
-#define GL_SIGNED_LUMINANCE8_ALPHA8_NV    0x8704
-#define GL_SIGNED_ALPHA_NV                0x8705
-#define GL_SIGNED_ALPHA8_NV               0x8706
-#define GL_SIGNED_INTENSITY_NV            0x8707
-#define GL_SIGNED_INTENSITY8_NV           0x8708
-#define GL_DSDT8_NV                       0x8709
-#define GL_DSDT8_MAG8_NV                  0x870A
-#define GL_DSDT8_MAG8_INTENSITY8_NV       0x870B
-#define GL_SIGNED_RGB_UNSIGNED_ALPHA_NV   0x870C
-#define GL_SIGNED_RGB8_UNSIGNED_ALPHA8_NV 0x870D
-#define GL_HI_SCALE_NV                    0x870E
-#define GL_LO_SCALE_NV                    0x870F
-#define GL_DS_SCALE_NV                    0x8710
-#define GL_DT_SCALE_NV                    0x8711
-#define GL_MAGNITUDE_SCALE_NV             0x8712
-#define GL_VIBRANCE_SCALE_NV              0x8713
-#define GL_HI_BIAS_NV                     0x8714
-#define GL_LO_BIAS_NV                     0x8715
-#define GL_DS_BIAS_NV                     0x8716
-#define GL_DT_BIAS_NV                     0x8717
-#define GL_MAGNITUDE_BIAS_NV              0x8718
-#define GL_VIBRANCE_BIAS_NV               0x8719
-#define GL_TEXTURE_BORDER_VALUES_NV       0x871A
-#define GL_TEXTURE_HI_SIZE_NV             0x871B
-#define GL_TEXTURE_LO_SIZE_NV             0x871C
-#define GL_TEXTURE_DS_SIZE_NV             0x871D
-#define GL_TEXTURE_DT_SIZE_NV             0x871E
-#define GL_TEXTURE_MAG_SIZE_NV            0x871F
+#ifndef GL_AMD_vertex_shader_viewport_index
+#define GL_AMD_vertex_shader_viewport_index 1
+#endif /* GL_AMD_vertex_shader_viewport_index */
+
+#ifndef GL_APPLE_aux_depth_stencil
+#define GL_APPLE_aux_depth_stencil 1
+#define GL_AUX_DEPTH_STENCIL_APPLE        0x8A14
+#endif /* GL_APPLE_aux_depth_stencil */
+
+#ifndef GL_APPLE_client_storage
+#define GL_APPLE_client_storage 1
+#define GL_UNPACK_CLIENT_STORAGE_APPLE    0x85B2
+#endif /* GL_APPLE_client_storage */
+
+#ifndef GL_APPLE_element_array
+#define GL_APPLE_element_array 1
+#define GL_ELEMENT_ARRAY_APPLE            0x8A0C
+#define GL_ELEMENT_ARRAY_TYPE_APPLE       0x8A0D
+#define GL_ELEMENT_ARRAY_POINTER_APPLE    0x8A0E
+typedef void (APIENTRYP PFNGLELEMENTPOINTERAPPLEPROC) (GLenum type, const void *pointer);
+typedef void (APIENTRYP PFNGLDRAWELEMENTARRAYAPPLEPROC) (GLenum mode, GLint first, GLsizei count);
+typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTARRAYAPPLEPROC) (GLenum mode, GLuint start, GLuint end, GLint first, GLsizei count);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTARRAYAPPLEPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
+typedef void (APIENTRYP PFNGLMULTIDRAWRANGEELEMENTARRAYAPPLEPROC) (GLenum mode, GLuint start, GLuint end, const GLint *first, const GLsizei *count, GLsizei primcount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glElementPointerAPPLE (GLenum type, const void *pointer);
+GLAPI void APIENTRY glDrawElementArrayAPPLE (GLenum mode, GLint first, GLsizei count);
+GLAPI void APIENTRY glDrawRangeElementArrayAPPLE (GLenum mode, GLuint start, GLuint end, GLint first, GLsizei count);
+GLAPI void APIENTRY glMultiDrawElementArrayAPPLE (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
+GLAPI void APIENTRY glMultiDrawRangeElementArrayAPPLE (GLenum mode, GLuint start, GLuint end, const GLint *first, const GLsizei *count, GLsizei primcount);
 #endif
+#endif /* GL_APPLE_element_array */
 
-#ifndef GL_NV_texture_shader2
-#define GL_DOT_PRODUCT_TEXTURE_3D_NV      0x86EF
+#ifndef GL_APPLE_fence
+#define GL_APPLE_fence 1
+#define GL_DRAW_PIXELS_APPLE              0x8A0A
+#define GL_FENCE_APPLE                    0x8A0B
+typedef void (APIENTRYP PFNGLGENFENCESAPPLEPROC) (GLsizei n, GLuint *fences);
+typedef void (APIENTRYP PFNGLDELETEFENCESAPPLEPROC) (GLsizei n, const GLuint *fences);
+typedef void (APIENTRYP PFNGLSETFENCEAPPLEPROC) (GLuint fence);
+typedef GLboolean (APIENTRYP PFNGLISFENCEAPPLEPROC) (GLuint fence);
+typedef GLboolean (APIENTRYP PFNGLTESTFENCEAPPLEPROC) (GLuint fence);
+typedef void (APIENTRYP PFNGLFINISHFENCEAPPLEPROC) (GLuint fence);
+typedef GLboolean (APIENTRYP PFNGLTESTOBJECTAPPLEPROC) (GLenum object, GLuint name);
+typedef void (APIENTRYP PFNGLFINISHOBJECTAPPLEPROC) (GLenum object, GLint name);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGenFencesAPPLE (GLsizei n, GLuint *fences);
+GLAPI void APIENTRY glDeleteFencesAPPLE (GLsizei n, const GLuint *fences);
+GLAPI void APIENTRY glSetFenceAPPLE (GLuint fence);
+GLAPI GLboolean APIENTRY glIsFenceAPPLE (GLuint fence);
+GLAPI GLboolean APIENTRY glTestFenceAPPLE (GLuint fence);
+GLAPI void APIENTRY glFinishFenceAPPLE (GLuint fence);
+GLAPI GLboolean APIENTRY glTestObjectAPPLE (GLenum object, GLuint name);
+GLAPI void APIENTRY glFinishObjectAPPLE (GLenum object, GLint name);
 #endif
+#endif /* GL_APPLE_fence */
 
-#ifndef GL_NV_vertex_array_range2
-#define GL_VERTEX_ARRAY_RANGE_WITHOUT_FLUSH_NV 0x8533
+#ifndef GL_APPLE_float_pixels
+#define GL_APPLE_float_pixels 1
+#define GL_HALF_APPLE                     0x140B
+#define GL_RGBA_FLOAT32_APPLE             0x8814
+#define GL_RGB_FLOAT32_APPLE              0x8815
+#define GL_ALPHA_FLOAT32_APPLE            0x8816
+#define GL_INTENSITY_FLOAT32_APPLE        0x8817
+#define GL_LUMINANCE_FLOAT32_APPLE        0x8818
+#define GL_LUMINANCE_ALPHA_FLOAT32_APPLE  0x8819
+#define GL_RGBA_FLOAT16_APPLE             0x881A
+#define GL_RGB_FLOAT16_APPLE              0x881B
+#define GL_ALPHA_FLOAT16_APPLE            0x881C
+#define GL_INTENSITY_FLOAT16_APPLE        0x881D
+#define GL_LUMINANCE_FLOAT16_APPLE        0x881E
+#define GL_LUMINANCE_ALPHA_FLOAT16_APPLE  0x881F
+#define GL_COLOR_FLOAT_APPLE              0x8A0F
+#endif /* GL_APPLE_float_pixels */
+
+#ifndef GL_APPLE_flush_buffer_range
+#define GL_APPLE_flush_buffer_range 1
+#define GL_BUFFER_SERIALIZED_MODIFY_APPLE 0x8A12
+#define GL_BUFFER_FLUSHING_UNMAP_APPLE    0x8A13
+typedef void (APIENTRYP PFNGLBUFFERPARAMETERIAPPLEPROC) (GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEAPPLEPROC) (GLenum target, GLintptr offset, GLsizeiptr size);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBufferParameteriAPPLE (GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glFlushMappedBufferRangeAPPLE (GLenum target, GLintptr offset, GLsizeiptr size);
 #endif
+#endif /* GL_APPLE_flush_buffer_range */
 
-#ifndef GL_NV_vertex_program
-#define GL_VERTEX_PROGRAM_NV              0x8620
-#define GL_VERTEX_STATE_PROGRAM_NV        0x8621
-#define GL_ATTRIB_ARRAY_SIZE_NV           0x8623
-#define GL_ATTRIB_ARRAY_STRIDE_NV         0x8624
-#define GL_ATTRIB_ARRAY_TYPE_NV           0x8625
-#define GL_CURRENT_ATTRIB_NV              0x8626
-#define GL_PROGRAM_LENGTH_NV              0x8627
-#define GL_PROGRAM_STRING_NV              0x8628
-#define GL_MODELVIEW_PROJECTION_NV        0x8629
-#define GL_IDENTITY_NV                    0x862A
-#define GL_INVERSE_NV                     0x862B
-#define GL_TRANSPOSE_NV                   0x862C
-#define GL_INVERSE_TRANSPOSE_NV           0x862D
-#define GL_MAX_TRACK_MATRIX_STACK_DEPTH_NV 0x862E
-#define GL_MAX_TRACK_MATRICES_NV          0x862F
-#define GL_MATRIX0_NV                     0x8630
-#define GL_MATRIX1_NV                     0x8631
-#define GL_MATRIX2_NV                     0x8632
-#define GL_MATRIX3_NV                     0x8633
-#define GL_MATRIX4_NV                     0x8634
-#define GL_MATRIX5_NV                     0x8635
-#define GL_MATRIX6_NV                     0x8636
-#define GL_MATRIX7_NV                     0x8637
-#define GL_CURRENT_MATRIX_STACK_DEPTH_NV  0x8640
-#define GL_CURRENT_MATRIX_NV              0x8641
-#define GL_VERTEX_PROGRAM_POINT_SIZE_NV   0x8642
-#define GL_VERTEX_PROGRAM_TWO_SIDE_NV     0x8643
-#define GL_PROGRAM_PARAMETER_NV           0x8644
-#define GL_ATTRIB_ARRAY_POINTER_NV        0x8645
-#define GL_PROGRAM_TARGET_NV              0x8646
-#define GL_PROGRAM_RESIDENT_NV            0x8647
-#define GL_TRACK_MATRIX_NV                0x8648
-#define GL_TRACK_MATRIX_TRANSFORM_NV      0x8649
-#define GL_VERTEX_PROGRAM_BINDING_NV      0x864A
-#define GL_PROGRAM_ERROR_POSITION_NV      0x864B
-#define GL_VERTEX_ATTRIB_ARRAY0_NV        0x8650
-#define GL_VERTEX_ATTRIB_ARRAY1_NV        0x8651
-#define GL_VERTEX_ATTRIB_ARRAY2_NV        0x8652
-#define GL_VERTEX_ATTRIB_ARRAY3_NV        0x8653
-#define GL_VERTEX_ATTRIB_ARRAY4_NV        0x8654
-#define GL_VERTEX_ATTRIB_ARRAY5_NV        0x8655
-#define GL_VERTEX_ATTRIB_ARRAY6_NV        0x8656
-#define GL_VERTEX_ATTRIB_ARRAY7_NV        0x8657
-#define GL_VERTEX_ATTRIB_ARRAY8_NV        0x8658
-#define GL_VERTEX_ATTRIB_ARRAY9_NV        0x8659
-#define GL_VERTEX_ATTRIB_ARRAY10_NV       0x865A
-#define GL_VERTEX_ATTRIB_ARRAY11_NV       0x865B
-#define GL_VERTEX_ATTRIB_ARRAY12_NV       0x865C
-#define GL_VERTEX_ATTRIB_ARRAY13_NV       0x865D
-#define GL_VERTEX_ATTRIB_ARRAY14_NV       0x865E
-#define GL_VERTEX_ATTRIB_ARRAY15_NV       0x865F
-#define GL_MAP1_VERTEX_ATTRIB0_4_NV       0x8660
-#define GL_MAP1_VERTEX_ATTRIB1_4_NV       0x8661
-#define GL_MAP1_VERTEX_ATTRIB2_4_NV       0x8662
-#define GL_MAP1_VERTEX_ATTRIB3_4_NV       0x8663
-#define GL_MAP1_VERTEX_ATTRIB4_4_NV       0x8664
-#define GL_MAP1_VERTEX_ATTRIB5_4_NV       0x8665
-#define GL_MAP1_VERTEX_ATTRIB6_4_NV       0x8666
-#define GL_MAP1_VERTEX_ATTRIB7_4_NV       0x8667
-#define GL_MAP1_VERTEX_ATTRIB8_4_NV       0x8668
-#define GL_MAP1_VERTEX_ATTRIB9_4_NV       0x8669
-#define GL_MAP1_VERTEX_ATTRIB10_4_NV      0x866A
-#define GL_MAP1_VERTEX_ATTRIB11_4_NV      0x866B
-#define GL_MAP1_VERTEX_ATTRIB12_4_NV      0x866C
-#define GL_MAP1_VERTEX_ATTRIB13_4_NV      0x866D
-#define GL_MAP1_VERTEX_ATTRIB14_4_NV      0x866E
-#define GL_MAP1_VERTEX_ATTRIB15_4_NV      0x866F
-#define GL_MAP2_VERTEX_ATTRIB0_4_NV       0x8670
-#define GL_MAP2_VERTEX_ATTRIB1_4_NV       0x8671
-#define GL_MAP2_VERTEX_ATTRIB2_4_NV       0x8672
-#define GL_MAP2_VERTEX_ATTRIB3_4_NV       0x8673
-#define GL_MAP2_VERTEX_ATTRIB4_4_NV       0x8674
-#define GL_MAP2_VERTEX_ATTRIB5_4_NV       0x8675
-#define GL_MAP2_VERTEX_ATTRIB6_4_NV       0x8676
-#define GL_MAP2_VERTEX_ATTRIB7_4_NV       0x8677
-#define GL_MAP2_VERTEX_ATTRIB8_4_NV       0x8678
-#define GL_MAP2_VERTEX_ATTRIB9_4_NV       0x8679
-#define GL_MAP2_VERTEX_ATTRIB10_4_NV      0x867A
-#define GL_MAP2_VERTEX_ATTRIB11_4_NV      0x867B
-#define GL_MAP2_VERTEX_ATTRIB12_4_NV      0x867C
-#define GL_MAP2_VERTEX_ATTRIB13_4_NV      0x867D
-#define GL_MAP2_VERTEX_ATTRIB14_4_NV      0x867E
-#define GL_MAP2_VERTEX_ATTRIB15_4_NV      0x867F
+#ifndef GL_APPLE_object_purgeable
+#define GL_APPLE_object_purgeable 1
+#define GL_BUFFER_OBJECT_APPLE            0x85B3
+#define GL_RELEASED_APPLE                 0x8A19
+#define GL_VOLATILE_APPLE                 0x8A1A
+#define GL_RETAINED_APPLE                 0x8A1B
+#define GL_UNDEFINED_APPLE                0x8A1C
+#define GL_PURGEABLE_APPLE                0x8A1D
+typedef GLenum (APIENTRYP PFNGLOBJECTPURGEABLEAPPLEPROC) (GLenum objectType, GLuint name, GLenum option);
+typedef GLenum (APIENTRYP PFNGLOBJECTUNPURGEABLEAPPLEPROC) (GLenum objectType, GLuint name, GLenum option);
+typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERIVAPPLEPROC) (GLenum objectType, GLuint name, GLenum pname, GLint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLenum APIENTRY glObjectPurgeableAPPLE (GLenum objectType, GLuint name, GLenum option);
+GLAPI GLenum APIENTRY glObjectUnpurgeableAPPLE (GLenum objectType, GLuint name, GLenum option);
+GLAPI void APIENTRY glGetObjectParameterivAPPLE (GLenum objectType, GLuint name, GLenum pname, GLint *params);
 #endif
+#endif /* GL_APPLE_object_purgeable */
 
-#ifndef GL_SGIX_texture_coordinate_clamp
-#define GL_TEXTURE_MAX_CLAMP_S_SGIX       0x8369
-#define GL_TEXTURE_MAX_CLAMP_T_SGIX       0x836A
-#define GL_TEXTURE_MAX_CLAMP_R_SGIX       0x836B
+#ifndef GL_APPLE_rgb_422
+#define GL_APPLE_rgb_422 1
+#define GL_RGB_422_APPLE                  0x8A1F
+#define GL_UNSIGNED_SHORT_8_8_APPLE       0x85BA
+#define GL_UNSIGNED_SHORT_8_8_REV_APPLE   0x85BB
+#define GL_RGB_RAW_422_APPLE              0x8A51
+#endif /* GL_APPLE_rgb_422 */
+
+#ifndef GL_APPLE_row_bytes
+#define GL_APPLE_row_bytes 1
+#define GL_PACK_ROW_BYTES_APPLE           0x8A15
+#define GL_UNPACK_ROW_BYTES_APPLE         0x8A16
+#endif /* GL_APPLE_row_bytes */
+
+#ifndef GL_APPLE_specular_vector
+#define GL_APPLE_specular_vector 1
+#define GL_LIGHT_MODEL_SPECULAR_VECTOR_APPLE 0x85B0
+#endif /* GL_APPLE_specular_vector */
+
+#ifndef GL_APPLE_texture_range
+#define GL_APPLE_texture_range 1
+#define GL_TEXTURE_RANGE_LENGTH_APPLE     0x85B7
+#define GL_TEXTURE_RANGE_POINTER_APPLE    0x85B8
+#define GL_TEXTURE_STORAGE_HINT_APPLE     0x85BC
+#define GL_STORAGE_PRIVATE_APPLE          0x85BD
+#define GL_STORAGE_CACHED_APPLE           0x85BE
+#define GL_STORAGE_SHARED_APPLE           0x85BF
+typedef void (APIENTRYP PFNGLTEXTURERANGEAPPLEPROC) (GLenum target, GLsizei length, const void *pointer);
+typedef void (APIENTRYP PFNGLGETTEXPARAMETERPOINTERVAPPLEPROC) (GLenum target, GLenum pname, void **params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTextureRangeAPPLE (GLenum target, GLsizei length, const void *pointer);
+GLAPI void APIENTRY glGetTexParameterPointervAPPLE (GLenum target, GLenum pname, void **params);
 #endif
+#endif /* GL_APPLE_texture_range */
 
-#ifndef GL_SGIX_scalebias_hint
-#define GL_SCALEBIAS_HINT_SGIX            0x8322
+#ifndef GL_APPLE_transform_hint
+#define GL_APPLE_transform_hint 1
+#define GL_TRANSFORM_HINT_APPLE           0x85B1
+#endif /* GL_APPLE_transform_hint */
+
+#ifndef GL_APPLE_vertex_array_object
+#define GL_APPLE_vertex_array_object 1
+#define GL_VERTEX_ARRAY_BINDING_APPLE     0x85B5
+typedef void (APIENTRYP PFNGLBINDVERTEXARRAYAPPLEPROC) (GLuint array);
+typedef void (APIENTRYP PFNGLDELETEVERTEXARRAYSAPPLEPROC) (GLsizei n, const GLuint *arrays);
+typedef void (APIENTRYP PFNGLGENVERTEXARRAYSAPPLEPROC) (GLsizei n, GLuint *arrays);
+typedef GLboolean (APIENTRYP PFNGLISVERTEXARRAYAPPLEPROC) (GLuint array);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBindVertexArrayAPPLE (GLuint array);
+GLAPI void APIENTRY glDeleteVertexArraysAPPLE (GLsizei n, const GLuint *arrays);
+GLAPI void APIENTRY glGenVertexArraysAPPLE (GLsizei n, GLuint *arrays);
+GLAPI GLboolean APIENTRY glIsVertexArrayAPPLE (GLuint array);
 #endif
+#endif /* GL_APPLE_vertex_array_object */
 
-#ifndef GL_OML_interlace
-#define GL_INTERLACE_OML                  0x8980
-#define GL_INTERLACE_READ_OML             0x8981
+#ifndef GL_APPLE_vertex_array_range
+#define GL_APPLE_vertex_array_range 1
+#define GL_VERTEX_ARRAY_RANGE_APPLE       0x851D
+#define GL_VERTEX_ARRAY_RANGE_LENGTH_APPLE 0x851E
+#define GL_VERTEX_ARRAY_STORAGE_HINT_APPLE 0x851F
+#define GL_VERTEX_ARRAY_RANGE_POINTER_APPLE 0x8521
+#define GL_STORAGE_CLIENT_APPLE           0x85B4
+typedef void (APIENTRYP PFNGLVERTEXARRAYRANGEAPPLEPROC) (GLsizei length, void *pointer);
+typedef void (APIENTRYP PFNGLFLUSHVERTEXARRAYRANGEAPPLEPROC) (GLsizei length, void *pointer);
+typedef void (APIENTRYP PFNGLVERTEXARRAYPARAMETERIAPPLEPROC) (GLenum pname, GLint param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexArrayRangeAPPLE (GLsizei length, void *pointer);
+GLAPI void APIENTRY glFlushVertexArrayRangeAPPLE (GLsizei length, void *pointer);
+GLAPI void APIENTRY glVertexArrayParameteriAPPLE (GLenum pname, GLint param);
 #endif
+#endif /* GL_APPLE_vertex_array_range */
 
-#ifndef GL_OML_subsample
-#define GL_FORMAT_SUBSAMPLE_24_24_OML     0x8982
-#define GL_FORMAT_SUBSAMPLE_244_244_OML   0x8983
+#ifndef GL_APPLE_vertex_program_evaluators
+#define GL_APPLE_vertex_program_evaluators 1
+#define GL_VERTEX_ATTRIB_MAP1_APPLE       0x8A00
+#define GL_VERTEX_ATTRIB_MAP2_APPLE       0x8A01
+#define GL_VERTEX_ATTRIB_MAP1_SIZE_APPLE  0x8A02
+#define GL_VERTEX_ATTRIB_MAP1_COEFF_APPLE 0x8A03
+#define GL_VERTEX_ATTRIB_MAP1_ORDER_APPLE 0x8A04
+#define GL_VERTEX_ATTRIB_MAP1_DOMAIN_APPLE 0x8A05
+#define GL_VERTEX_ATTRIB_MAP2_SIZE_APPLE  0x8A06
+#define GL_VERTEX_ATTRIB_MAP2_COEFF_APPLE 0x8A07
+#define GL_VERTEX_ATTRIB_MAP2_ORDER_APPLE 0x8A08
+#define GL_VERTEX_ATTRIB_MAP2_DOMAIN_APPLE 0x8A09
+typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBAPPLEPROC) (GLuint index, GLenum pname);
+typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBAPPLEPROC) (GLuint index, GLenum pname);
+typedef GLboolean (APIENTRYP PFNGLISVERTEXATTRIBENABLEDAPPLEPROC) (GLuint index, GLenum pname);
+typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB1DAPPLEPROC) (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint stride, GLint order, const GLdouble *points);
+typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB1FAPPLEPROC) (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint stride, GLint order, const GLfloat *points);
+typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB2DAPPLEPROC) (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, const GLdouble *points);
+typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB2FAPPLEPROC) (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, const GLfloat *points);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glEnableVertexAttribAPPLE (GLuint index, GLenum pname);
+GLAPI void APIENTRY glDisableVertexAttribAPPLE (GLuint index, GLenum pname);
+GLAPI GLboolean APIENTRY glIsVertexAttribEnabledAPPLE (GLuint index, GLenum pname);
+GLAPI void APIENTRY glMapVertexAttrib1dAPPLE (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint stride, GLint order, const GLdouble *points);
+GLAPI void APIENTRY glMapVertexAttrib1fAPPLE (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint stride, GLint order, const GLfloat *points);
+GLAPI void APIENTRY glMapVertexAttrib2dAPPLE (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, const GLdouble *points);
+GLAPI void APIENTRY glMapVertexAttrib2fAPPLE (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, const GLfloat *points);
 #endif
+#endif /* GL_APPLE_vertex_program_evaluators */
 
-#ifndef GL_OML_resample
-#define GL_PACK_RESAMPLE_OML              0x8984
-#define GL_UNPACK_RESAMPLE_OML            0x8985
-#define GL_RESAMPLE_REPLICATE_OML         0x8986
-#define GL_RESAMPLE_ZERO_FILL_OML         0x8987
-#define GL_RESAMPLE_AVERAGE_OML           0x8988
-#define GL_RESAMPLE_DECIMATE_OML          0x8989
+#ifndef GL_APPLE_ycbcr_422
+#define GL_APPLE_ycbcr_422 1
+#define GL_YCBCR_422_APPLE                0x85B9
+#endif /* GL_APPLE_ycbcr_422 */
+
+#ifndef GL_ATI_draw_buffers
+#define GL_ATI_draw_buffers 1
+#define GL_MAX_DRAW_BUFFERS_ATI           0x8824
+#define GL_DRAW_BUFFER0_ATI               0x8825
+#define GL_DRAW_BUFFER1_ATI               0x8826
+#define GL_DRAW_BUFFER2_ATI               0x8827
+#define GL_DRAW_BUFFER3_ATI               0x8828
+#define GL_DRAW_BUFFER4_ATI               0x8829
+#define GL_DRAW_BUFFER5_ATI               0x882A
+#define GL_DRAW_BUFFER6_ATI               0x882B
+#define GL_DRAW_BUFFER7_ATI               0x882C
+#define GL_DRAW_BUFFER8_ATI               0x882D
+#define GL_DRAW_BUFFER9_ATI               0x882E
+#define GL_DRAW_BUFFER10_ATI              0x882F
+#define GL_DRAW_BUFFER11_ATI              0x8830
+#define GL_DRAW_BUFFER12_ATI              0x8831
+#define GL_DRAW_BUFFER13_ATI              0x8832
+#define GL_DRAW_BUFFER14_ATI              0x8833
+#define GL_DRAW_BUFFER15_ATI              0x8834
+typedef void (APIENTRYP PFNGLDRAWBUFFERSATIPROC) (GLsizei n, const GLenum *bufs);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawBuffersATI (GLsizei n, const GLenum *bufs);
 #endif
+#endif /* GL_ATI_draw_buffers */
 
-#ifndef GL_NV_copy_depth_to_color
-#define GL_DEPTH_STENCIL_TO_RGBA_NV       0x886E
-#define GL_DEPTH_STENCIL_TO_BGRA_NV       0x886F
+#ifndef GL_ATI_element_array
+#define GL_ATI_element_array 1
+#define GL_ELEMENT_ARRAY_ATI              0x8768
+#define GL_ELEMENT_ARRAY_TYPE_ATI         0x8769
+#define GL_ELEMENT_ARRAY_POINTER_ATI      0x876A
+typedef void (APIENTRYP PFNGLELEMENTPOINTERATIPROC) (GLenum type, const void *pointer);
+typedef void (APIENTRYP PFNGLDRAWELEMENTARRAYATIPROC) (GLenum mode, GLsizei count);
+typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTARRAYATIPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glElementPointerATI (GLenum type, const void *pointer);
+GLAPI void APIENTRY glDrawElementArrayATI (GLenum mode, GLsizei count);
+GLAPI void APIENTRY glDrawRangeElementArrayATI (GLenum mode, GLuint start, GLuint end, GLsizei count);
 #endif
+#endif /* GL_ATI_element_array */
 
 #ifndef GL_ATI_envmap_bumpmap
+#define GL_ATI_envmap_bumpmap 1
 #define GL_BUMP_ROT_MATRIX_ATI            0x8775
 #define GL_BUMP_ROT_MATRIX_SIZE_ATI       0x8776
 #define GL_BUMP_NUM_TEX_UNITS_ATI         0x8777
@@ -4531,9 +5743,20 @@ extern "C" {
 #define GL_DU8DV8_ATI                     0x877A
 #define GL_BUMP_ENVMAP_ATI                0x877B
 #define GL_BUMP_TARGET_ATI                0x877C
+typedef void (APIENTRYP PFNGLTEXBUMPPARAMETERIVATIPROC) (GLenum pname, const GLint *param);
+typedef void (APIENTRYP PFNGLTEXBUMPPARAMETERFVATIPROC) (GLenum pname, const GLfloat *param);
+typedef void (APIENTRYP PFNGLGETTEXBUMPPARAMETERIVATIPROC) (GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETTEXBUMPPARAMETERFVATIPROC) (GLenum pname, GLfloat *param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexBumpParameterivATI (GLenum pname, const GLint *param);
+GLAPI void APIENTRY glTexBumpParameterfvATI (GLenum pname, const GLfloat *param);
+GLAPI void APIENTRY glGetTexBumpParameterivATI (GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetTexBumpParameterfvATI (GLenum pname, GLfloat *param);
 #endif
+#endif /* GL_ATI_envmap_bumpmap */
 
 #ifndef GL_ATI_fragment_shader
+#define GL_ATI_fragment_shader 1
 #define GL_FRAGMENT_SHADER_ATI            0x8920
 #define GL_REG_0_ATI                      0x8921
 #define GL_REG_1_ATI                      0x8922
@@ -4638,9 +5861,63 @@ extern "C" {
 #define GL_COMP_BIT_ATI                   0x00000002
 #define GL_NEGATE_BIT_ATI                 0x00000004
 #define GL_BIAS_BIT_ATI                   0x00000008
+typedef GLuint (APIENTRYP PFNGLGENFRAGMENTSHADERSATIPROC) (GLuint range);
+typedef void (APIENTRYP PFNGLBINDFRAGMENTSHADERATIPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLDELETEFRAGMENTSHADERATIPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLBEGINFRAGMENTSHADERATIPROC) (void);
+typedef void (APIENTRYP PFNGLENDFRAGMENTSHADERATIPROC) (void);
+typedef void (APIENTRYP PFNGLPASSTEXCOORDATIPROC) (GLuint dst, GLuint coord, GLenum swizzle);
+typedef void (APIENTRYP PFNGLSAMPLEMAPATIPROC) (GLuint dst, GLuint interp, GLenum swizzle);
+typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP1ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
+typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP2ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
+typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP3ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
+typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP1ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
+typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP2ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
+typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP3ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
+typedef void (APIENTRYP PFNGLSETFRAGMENTSHADERCONSTANTATIPROC) (GLuint dst, const GLfloat *value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLuint APIENTRY glGenFragmentShadersATI (GLuint range);
+GLAPI void APIENTRY glBindFragmentShaderATI (GLuint id);
+GLAPI void APIENTRY glDeleteFragmentShaderATI (GLuint id);
+GLAPI void APIENTRY glBeginFragmentShaderATI (void);
+GLAPI void APIENTRY glEndFragmentShaderATI (void);
+GLAPI void APIENTRY glPassTexCoordATI (GLuint dst, GLuint coord, GLenum swizzle);
+GLAPI void APIENTRY glSampleMapATI (GLuint dst, GLuint interp, GLenum swizzle);
+GLAPI void APIENTRY glColorFragmentOp1ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
+GLAPI void APIENTRY glColorFragmentOp2ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
+GLAPI void APIENTRY glColorFragmentOp3ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
+GLAPI void APIENTRY glAlphaFragmentOp1ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
+GLAPI void APIENTRY glAlphaFragmentOp2ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
+GLAPI void APIENTRY glAlphaFragmentOp3ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
+GLAPI void APIENTRY glSetFragmentShaderConstantATI (GLuint dst, const GLfloat *value);
+#endif
+#endif /* GL_ATI_fragment_shader */
+
+#ifndef GL_ATI_map_object_buffer
+#define GL_ATI_map_object_buffer 1
+typedef void *(APIENTRYP PFNGLMAPOBJECTBUFFERATIPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLUNMAPOBJECTBUFFERATIPROC) (GLuint buffer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void *APIENTRY glMapObjectBufferATI (GLuint buffer);
+GLAPI void APIENTRY glUnmapObjectBufferATI (GLuint buffer);
 #endif
+#endif /* GL_ATI_map_object_buffer */
+
+#ifndef GL_ATI_meminfo
+#define GL_ATI_meminfo 1
+#define GL_VBO_FREE_MEMORY_ATI            0x87FB
+#define GL_TEXTURE_FREE_MEMORY_ATI        0x87FC
+#define GL_RENDERBUFFER_FREE_MEMORY_ATI   0x87FD
+#endif /* GL_ATI_meminfo */
+
+#ifndef GL_ATI_pixel_format_float
+#define GL_ATI_pixel_format_float 1
+#define GL_RGBA_FLOAT_MODE_ATI            0x8820
+#define GL_COLOR_CLEAR_UNCLAMPED_VALUE_ATI 0x8835
+#endif /* GL_ATI_pixel_format_float */
 
 #ifndef GL_ATI_pn_triangles
+#define GL_ATI_pn_triangles 1
 #define GL_PN_TRIANGLES_ATI               0x87F0
 #define GL_MAX_PN_TRIANGLES_TESSELATION_LEVEL_ATI 0x87F1
 #define GL_PN_TRIANGLES_POINT_MODE_ATI    0x87F2
@@ -4650,9 +5927,64 @@ extern "C" {
 #define GL_PN_TRIANGLES_POINT_MODE_CUBIC_ATI 0x87F6
 #define GL_PN_TRIANGLES_NORMAL_MODE_LINEAR_ATI 0x87F7
 #define GL_PN_TRIANGLES_NORMAL_MODE_QUADRATIC_ATI 0x87F8
+typedef void (APIENTRYP PFNGLPNTRIANGLESIATIPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLPNTRIANGLESFATIPROC) (GLenum pname, GLfloat param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glPNTrianglesiATI (GLenum pname, GLint param);
+GLAPI void APIENTRY glPNTrianglesfATI (GLenum pname, GLfloat param);
+#endif
+#endif /* GL_ATI_pn_triangles */
+
+#ifndef GL_ATI_separate_stencil
+#define GL_ATI_separate_stencil 1
+#define GL_STENCIL_BACK_FUNC_ATI          0x8800
+#define GL_STENCIL_BACK_FAIL_ATI          0x8801
+#define GL_STENCIL_BACK_PASS_DEPTH_FAIL_ATI 0x8802
+#define GL_STENCIL_BACK_PASS_DEPTH_PASS_ATI 0x8803
+typedef void (APIENTRYP PFNGLSTENCILOPSEPARATEATIPROC) (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
+typedef void (APIENTRYP PFNGLSTENCILFUNCSEPARATEATIPROC) (GLenum frontfunc, GLenum backfunc, GLint ref, GLuint mask);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glStencilOpSeparateATI (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
+GLAPI void APIENTRY glStencilFuncSeparateATI (GLenum frontfunc, GLenum backfunc, GLint ref, GLuint mask);
 #endif
+#endif /* GL_ATI_separate_stencil */
+
+#ifndef GL_ATI_text_fragment_shader
+#define GL_ATI_text_fragment_shader 1
+#define GL_TEXT_FRAGMENT_SHADER_ATI       0x8200
+#endif /* GL_ATI_text_fragment_shader */
+
+#ifndef GL_ATI_texture_env_combine3
+#define GL_ATI_texture_env_combine3 1
+#define GL_MODULATE_ADD_ATI               0x8744
+#define GL_MODULATE_SIGNED_ADD_ATI        0x8745
+#define GL_MODULATE_SUBTRACT_ATI          0x8746
+#endif /* GL_ATI_texture_env_combine3 */
+
+#ifndef GL_ATI_texture_float
+#define GL_ATI_texture_float 1
+#define GL_RGBA_FLOAT32_ATI               0x8814
+#define GL_RGB_FLOAT32_ATI                0x8815
+#define GL_ALPHA_FLOAT32_ATI              0x8816
+#define GL_INTENSITY_FLOAT32_ATI          0x8817
+#define GL_LUMINANCE_FLOAT32_ATI          0x8818
+#define GL_LUMINANCE_ALPHA_FLOAT32_ATI    0x8819
+#define GL_RGBA_FLOAT16_ATI               0x881A
+#define GL_RGB_FLOAT16_ATI                0x881B
+#define GL_ALPHA_FLOAT16_ATI              0x881C
+#define GL_INTENSITY_FLOAT16_ATI          0x881D
+#define GL_LUMINANCE_FLOAT16_ATI          0x881E
+#define GL_LUMINANCE_ALPHA_FLOAT16_ATI    0x881F
+#endif /* GL_ATI_texture_float */
+
+#ifndef GL_ATI_texture_mirror_once
+#define GL_ATI_texture_mirror_once 1
+#define GL_MIRROR_CLAMP_ATI               0x8742
+#define GL_MIRROR_CLAMP_TO_EDGE_ATI       0x8743
+#endif /* GL_ATI_texture_mirror_once */
 
 #ifndef GL_ATI_vertex_array_object
+#define GL_ATI_vertex_array_object 1
 #define GL_STATIC_ATI                     0x8760
 #define GL_DYNAMIC_ATI                    0x8761
 #define GL_PRESERVE_ATI                   0x8762
@@ -4661,122 +5993,48 @@ extern "C" {
 #define GL_OBJECT_BUFFER_USAGE_ATI        0x8765
 #define GL_ARRAY_OBJECT_BUFFER_ATI        0x8766
 #define GL_ARRAY_OBJECT_OFFSET_ATI        0x8767
+typedef GLuint (APIENTRYP PFNGLNEWOBJECTBUFFERATIPROC) (GLsizei size, const void *pointer, GLenum usage);
+typedef GLboolean (APIENTRYP PFNGLISOBJECTBUFFERATIPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLUPDATEOBJECTBUFFERATIPROC) (GLuint buffer, GLuint offset, GLsizei size, const void *pointer, GLenum preserve);
+typedef void (APIENTRYP PFNGLGETOBJECTBUFFERFVATIPROC) (GLuint buffer, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETOBJECTBUFFERIVATIPROC) (GLuint buffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLFREEOBJECTBUFFERATIPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLARRAYOBJECTATIPROC) (GLenum array, GLint size, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
+typedef void (APIENTRYP PFNGLGETARRAYOBJECTFVATIPROC) (GLenum array, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETARRAYOBJECTIVATIPROC) (GLenum array, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLVARIANTARRAYOBJECTATIPROC) (GLuint id, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
+typedef void (APIENTRYP PFNGLGETVARIANTARRAYOBJECTFVATIPROC) (GLuint id, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETVARIANTARRAYOBJECTIVATIPROC) (GLuint id, GLenum pname, GLint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLuint APIENTRY glNewObjectBufferATI (GLsizei size, const void *pointer, GLenum usage);
+GLAPI GLboolean APIENTRY glIsObjectBufferATI (GLuint buffer);
+GLAPI void APIENTRY glUpdateObjectBufferATI (GLuint buffer, GLuint offset, GLsizei size, const void *pointer, GLenum preserve);
+GLAPI void APIENTRY glGetObjectBufferfvATI (GLuint buffer, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetObjectBufferivATI (GLuint buffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glFreeObjectBufferATI (GLuint buffer);
+GLAPI void APIENTRY glArrayObjectATI (GLenum array, GLint size, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
+GLAPI void APIENTRY glGetArrayObjectfvATI (GLenum array, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetArrayObjectivATI (GLenum array, GLenum pname, GLint *params);
+GLAPI void APIENTRY glVariantArrayObjectATI (GLuint id, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
+GLAPI void APIENTRY glGetVariantArrayObjectfvATI (GLuint id, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetVariantArrayObjectivATI (GLuint id, GLenum pname, GLint *params);
 #endif
+#endif /* GL_ATI_vertex_array_object */
 
-#ifndef GL_EXT_vertex_shader
-#define GL_VERTEX_SHADER_EXT              0x8780
-#define GL_VERTEX_SHADER_BINDING_EXT      0x8781
-#define GL_OP_INDEX_EXT                   0x8782
-#define GL_OP_NEGATE_EXT                  0x8783
-#define GL_OP_DOT3_EXT                    0x8784
-#define GL_OP_DOT4_EXT                    0x8785
-#define GL_OP_MUL_EXT                     0x8786
-#define GL_OP_ADD_EXT                     0x8787
-#define GL_OP_MADD_EXT                    0x8788
-#define GL_OP_FRAC_EXT                    0x8789
-#define GL_OP_MAX_EXT                     0x878A
-#define GL_OP_MIN_EXT                     0x878B
-#define GL_OP_SET_GE_EXT                  0x878C
-#define GL_OP_SET_LT_EXT                  0x878D
-#define GL_OP_CLAMP_EXT                   0x878E
-#define GL_OP_FLOOR_EXT                   0x878F
-#define GL_OP_ROUND_EXT                   0x8790
-#define GL_OP_EXP_BASE_2_EXT              0x8791
-#define GL_OP_LOG_BASE_2_EXT              0x8792
-#define GL_OP_POWER_EXT                   0x8793
-#define GL_OP_RECIP_EXT                   0x8794
-#define GL_OP_RECIP_SQRT_EXT              0x8795
-#define GL_OP_SUB_EXT                     0x8796
-#define GL_OP_CROSS_PRODUCT_EXT           0x8797
-#define GL_OP_MULTIPLY_MATRIX_EXT         0x8798
-#define GL_OP_MOV_EXT                     0x8799
-#define GL_OUTPUT_VERTEX_EXT              0x879A
-#define GL_OUTPUT_COLOR0_EXT              0x879B
-#define GL_OUTPUT_COLOR1_EXT              0x879C
-#define GL_OUTPUT_TEXTURE_COORD0_EXT      0x879D
-#define GL_OUTPUT_TEXTURE_COORD1_EXT      0x879E
-#define GL_OUTPUT_TEXTURE_COORD2_EXT      0x879F
-#define GL_OUTPUT_TEXTURE_COORD3_EXT      0x87A0
-#define GL_OUTPUT_TEXTURE_COORD4_EXT      0x87A1
-#define GL_OUTPUT_TEXTURE_COORD5_EXT      0x87A2
-#define GL_OUTPUT_TEXTURE_COORD6_EXT      0x87A3
-#define GL_OUTPUT_TEXTURE_COORD7_EXT      0x87A4
-#define GL_OUTPUT_TEXTURE_COORD8_EXT      0x87A5
-#define GL_OUTPUT_TEXTURE_COORD9_EXT      0x87A6
-#define GL_OUTPUT_TEXTURE_COORD10_EXT     0x87A7
-#define GL_OUTPUT_TEXTURE_COORD11_EXT     0x87A8
-#define GL_OUTPUT_TEXTURE_COORD12_EXT     0x87A9
-#define GL_OUTPUT_TEXTURE_COORD13_EXT     0x87AA
-#define GL_OUTPUT_TEXTURE_COORD14_EXT     0x87AB
-#define GL_OUTPUT_TEXTURE_COORD15_EXT     0x87AC
-#define GL_OUTPUT_TEXTURE_COORD16_EXT     0x87AD
-#define GL_OUTPUT_TEXTURE_COORD17_EXT     0x87AE
-#define GL_OUTPUT_TEXTURE_COORD18_EXT     0x87AF
-#define GL_OUTPUT_TEXTURE_COORD19_EXT     0x87B0
-#define GL_OUTPUT_TEXTURE_COORD20_EXT     0x87B1
-#define GL_OUTPUT_TEXTURE_COORD21_EXT     0x87B2
-#define GL_OUTPUT_TEXTURE_COORD22_EXT     0x87B3
-#define GL_OUTPUT_TEXTURE_COORD23_EXT     0x87B4
-#define GL_OUTPUT_TEXTURE_COORD24_EXT     0x87B5
-#define GL_OUTPUT_TEXTURE_COORD25_EXT     0x87B6
-#define GL_OUTPUT_TEXTURE_COORD26_EXT     0x87B7
-#define GL_OUTPUT_TEXTURE_COORD27_EXT     0x87B8
-#define GL_OUTPUT_TEXTURE_COORD28_EXT     0x87B9
-#define GL_OUTPUT_TEXTURE_COORD29_EXT     0x87BA
-#define GL_OUTPUT_TEXTURE_COORD30_EXT     0x87BB
-#define GL_OUTPUT_TEXTURE_COORD31_EXT     0x87BC
-#define GL_OUTPUT_FOG_EXT                 0x87BD
-#define GL_SCALAR_EXT                     0x87BE
-#define GL_VECTOR_EXT                     0x87BF
-#define GL_MATRIX_EXT                     0x87C0
-#define GL_VARIANT_EXT                    0x87C1
-#define GL_INVARIANT_EXT                  0x87C2
-#define GL_LOCAL_CONSTANT_EXT             0x87C3
-#define GL_LOCAL_EXT                      0x87C4
-#define GL_MAX_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87C5
-#define GL_MAX_VERTEX_SHADER_VARIANTS_EXT 0x87C6
-#define GL_MAX_VERTEX_SHADER_INVARIANTS_EXT 0x87C7
-#define GL_MAX_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87C8
-#define GL_MAX_VERTEX_SHADER_LOCALS_EXT   0x87C9
-#define GL_MAX_OPTIMIZED_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87CA
-#define GL_MAX_OPTIMIZED_VERTEX_SHADER_VARIANTS_EXT 0x87CB
-#define GL_MAX_OPTIMIZED_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87CC
-#define GL_MAX_OPTIMIZED_VERTEX_SHADER_INVARIANTS_EXT 0x87CD
-#define GL_MAX_OPTIMIZED_VERTEX_SHADER_LOCALS_EXT 0x87CE
-#define GL_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87CF
-#define GL_VERTEX_SHADER_VARIANTS_EXT     0x87D0
-#define GL_VERTEX_SHADER_INVARIANTS_EXT   0x87D1
-#define GL_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87D2
-#define GL_VERTEX_SHADER_LOCALS_EXT       0x87D3
-#define GL_VERTEX_SHADER_OPTIMIZED_EXT    0x87D4
-#define GL_X_EXT                          0x87D5
-#define GL_Y_EXT                          0x87D6
-#define GL_Z_EXT                          0x87D7
-#define GL_W_EXT                          0x87D8
-#define GL_NEGATIVE_X_EXT                 0x87D9
-#define GL_NEGATIVE_Y_EXT                 0x87DA
-#define GL_NEGATIVE_Z_EXT                 0x87DB
-#define GL_NEGATIVE_W_EXT                 0x87DC
-#define GL_ZERO_EXT                       0x87DD
-#define GL_ONE_EXT                        0x87DE
-#define GL_NEGATIVE_ONE_EXT               0x87DF
-#define GL_NORMALIZED_RANGE_EXT           0x87E0
-#define GL_FULL_RANGE_EXT                 0x87E1
-#define GL_CURRENT_VERTEX_EXT             0x87E2
-#define GL_MVP_MATRIX_EXT                 0x87E3
-#define GL_VARIANT_VALUE_EXT              0x87E4
-#define GL_VARIANT_DATATYPE_EXT           0x87E5
-#define GL_VARIANT_ARRAY_STRIDE_EXT       0x87E6
-#define GL_VARIANT_ARRAY_TYPE_EXT         0x87E7
-#define GL_VARIANT_ARRAY_EXT              0x87E8
-#define GL_VARIANT_ARRAY_POINTER_EXT      0x87E9
-#define GL_INVARIANT_VALUE_EXT            0x87EA
-#define GL_INVARIANT_DATATYPE_EXT         0x87EB
-#define GL_LOCAL_CONSTANT_VALUE_EXT       0x87EC
-#define GL_LOCAL_CONSTANT_DATATYPE_EXT    0x87ED
+#ifndef GL_ATI_vertex_attrib_array_object
+#define GL_ATI_vertex_attrib_array_object 1
+typedef void (APIENTRYP PFNGLVERTEXATTRIBARRAYOBJECTATIPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLuint buffer, GLuint offset);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBARRAYOBJECTFVATIPROC) (GLuint index, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBARRAYOBJECTIVATIPROC) (GLuint index, GLenum pname, GLint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexAttribArrayObjectATI (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLuint buffer, GLuint offset);
+GLAPI void APIENTRY glGetVertexAttribArrayObjectfvATI (GLuint index, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetVertexAttribArrayObjectivATI (GLuint index, GLenum pname, GLint *params);
 #endif
+#endif /* GL_ATI_vertex_attrib_array_object */
 
 #ifndef GL_ATI_vertex_streams
+#define GL_ATI_vertex_streams 1
 #define GL_MAX_VERTEX_STREAMS_ATI         0x876B
 #define GL_VERTEX_STREAM0_ATI             0x876C
 #define GL_VERTEX_STREAM1_ATI             0x876D
@@ -4787,319 +6045,1014 @@ extern "C" {
 #define GL_VERTEX_STREAM6_ATI             0x8772
 #define GL_VERTEX_STREAM7_ATI             0x8773
 #define GL_VERTEX_SOURCE_ATI              0x8774
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1SATIPROC) (GLenum stream, GLshort x);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1SVATIPROC) (GLenum stream, const GLshort *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1IATIPROC) (GLenum stream, GLint x);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1IVATIPROC) (GLenum stream, const GLint *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1FATIPROC) (GLenum stream, GLfloat x);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1FVATIPROC) (GLenum stream, const GLfloat *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1DATIPROC) (GLenum stream, GLdouble x);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM1DVATIPROC) (GLenum stream, const GLdouble *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2SATIPROC) (GLenum stream, GLshort x, GLshort y);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2SVATIPROC) (GLenum stream, const GLshort *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2IATIPROC) (GLenum stream, GLint x, GLint y);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2IVATIPROC) (GLenum stream, const GLint *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2FATIPROC) (GLenum stream, GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2FVATIPROC) (GLenum stream, const GLfloat *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2DATIPROC) (GLenum stream, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM2DVATIPROC) (GLenum stream, const GLdouble *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3SATIPROC) (GLenum stream, GLshort x, GLshort y, GLshort z);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3SVATIPROC) (GLenum stream, const GLshort *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3IATIPROC) (GLenum stream, GLint x, GLint y, GLint z);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3IVATIPROC) (GLenum stream, const GLint *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3FATIPROC) (GLenum stream, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3FVATIPROC) (GLenum stream, const GLfloat *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3DATIPROC) (GLenum stream, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM3DVATIPROC) (GLenum stream, const GLdouble *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4SATIPROC) (GLenum stream, GLshort x, GLshort y, GLshort z, GLshort w);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4SVATIPROC) (GLenum stream, const GLshort *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4IATIPROC) (GLenum stream, GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4IVATIPROC) (GLenum stream, const GLint *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4FATIPROC) (GLenum stream, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4FVATIPROC) (GLenum stream, const GLfloat *coords);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4DATIPROC) (GLenum stream, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLVERTEXSTREAM4DVATIPROC) (GLenum stream, const GLdouble *coords);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3BATIPROC) (GLenum stream, GLbyte nx, GLbyte ny, GLbyte nz);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3BVATIPROC) (GLenum stream, const GLbyte *coords);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3SATIPROC) (GLenum stream, GLshort nx, GLshort ny, GLshort nz);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3SVATIPROC) (GLenum stream, const GLshort *coords);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3IATIPROC) (GLenum stream, GLint nx, GLint ny, GLint nz);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3IVATIPROC) (GLenum stream, const GLint *coords);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3FATIPROC) (GLenum stream, GLfloat nx, GLfloat ny, GLfloat nz);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3FVATIPROC) (GLenum stream, const GLfloat *coords);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3DATIPROC) (GLenum stream, GLdouble nx, GLdouble ny, GLdouble nz);
+typedef void (APIENTRYP PFNGLNORMALSTREAM3DVATIPROC) (GLenum stream, const GLdouble *coords);
+typedef void (APIENTRYP PFNGLCLIENTACTIVEVERTEXSTREAMATIPROC) (GLenum stream);
+typedef void (APIENTRYP PFNGLVERTEXBLENDENVIATIPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLVERTEXBLENDENVFATIPROC) (GLenum pname, GLfloat param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexStream1sATI (GLenum stream, GLshort x);
+GLAPI void APIENTRY glVertexStream1svATI (GLenum stream, const GLshort *coords);
+GLAPI void APIENTRY glVertexStream1iATI (GLenum stream, GLint x);
+GLAPI void APIENTRY glVertexStream1ivATI (GLenum stream, const GLint *coords);
+GLAPI void APIENTRY glVertexStream1fATI (GLenum stream, GLfloat x);
+GLAPI void APIENTRY glVertexStream1fvATI (GLenum stream, const GLfloat *coords);
+GLAPI void APIENTRY glVertexStream1dATI (GLenum stream, GLdouble x);
+GLAPI void APIENTRY glVertexStream1dvATI (GLenum stream, const GLdouble *coords);
+GLAPI void APIENTRY glVertexStream2sATI (GLenum stream, GLshort x, GLshort y);
+GLAPI void APIENTRY glVertexStream2svATI (GLenum stream, const GLshort *coords);
+GLAPI void APIENTRY glVertexStream2iATI (GLenum stream, GLint x, GLint y);
+GLAPI void APIENTRY glVertexStream2ivATI (GLenum stream, const GLint *coords);
+GLAPI void APIENTRY glVertexStream2fATI (GLenum stream, GLfloat x, GLfloat y);
+GLAPI void APIENTRY glVertexStream2fvATI (GLenum stream, const GLfloat *coords);
+GLAPI void APIENTRY glVertexStream2dATI (GLenum stream, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glVertexStream2dvATI (GLenum stream, const GLdouble *coords);
+GLAPI void APIENTRY glVertexStream3sATI (GLenum stream, GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glVertexStream3svATI (GLenum stream, const GLshort *coords);
+GLAPI void APIENTRY glVertexStream3iATI (GLenum stream, GLint x, GLint y, GLint z);
+GLAPI void APIENTRY glVertexStream3ivATI (GLenum stream, const GLint *coords);
+GLAPI void APIENTRY glVertexStream3fATI (GLenum stream, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glVertexStream3fvATI (GLenum stream, const GLfloat *coords);
+GLAPI void APIENTRY glVertexStream3dATI (GLenum stream, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glVertexStream3dvATI (GLenum stream, const GLdouble *coords);
+GLAPI void APIENTRY glVertexStream4sATI (GLenum stream, GLshort x, GLshort y, GLshort z, GLshort w);
+GLAPI void APIENTRY glVertexStream4svATI (GLenum stream, const GLshort *coords);
+GLAPI void APIENTRY glVertexStream4iATI (GLenum stream, GLint x, GLint y, GLint z, GLint w);
+GLAPI void APIENTRY glVertexStream4ivATI (GLenum stream, const GLint *coords);
+GLAPI void APIENTRY glVertexStream4fATI (GLenum stream, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glVertexStream4fvATI (GLenum stream, const GLfloat *coords);
+GLAPI void APIENTRY glVertexStream4dATI (GLenum stream, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glVertexStream4dvATI (GLenum stream, const GLdouble *coords);
+GLAPI void APIENTRY glNormalStream3bATI (GLenum stream, GLbyte nx, GLbyte ny, GLbyte nz);
+GLAPI void APIENTRY glNormalStream3bvATI (GLenum stream, const GLbyte *coords);
+GLAPI void APIENTRY glNormalStream3sATI (GLenum stream, GLshort nx, GLshort ny, GLshort nz);
+GLAPI void APIENTRY glNormalStream3svATI (GLenum stream, const GLshort *coords);
+GLAPI void APIENTRY glNormalStream3iATI (GLenum stream, GLint nx, GLint ny, GLint nz);
+GLAPI void APIENTRY glNormalStream3ivATI (GLenum stream, const GLint *coords);
+GLAPI void APIENTRY glNormalStream3fATI (GLenum stream, GLfloat nx, GLfloat ny, GLfloat nz);
+GLAPI void APIENTRY glNormalStream3fvATI (GLenum stream, const GLfloat *coords);
+GLAPI void APIENTRY glNormalStream3dATI (GLenum stream, GLdouble nx, GLdouble ny, GLdouble nz);
+GLAPI void APIENTRY glNormalStream3dvATI (GLenum stream, const GLdouble *coords);
+GLAPI void APIENTRY glClientActiveVertexStreamATI (GLenum stream);
+GLAPI void APIENTRY glVertexBlendEnviATI (GLenum pname, GLint param);
+GLAPI void APIENTRY glVertexBlendEnvfATI (GLenum pname, GLfloat param);
 #endif
+#endif /* GL_ATI_vertex_streams */
 
-#ifndef GL_ATI_element_array
-#define GL_ELEMENT_ARRAY_ATI              0x8768
-#define GL_ELEMENT_ARRAY_TYPE_ATI         0x8769
-#define GL_ELEMENT_ARRAY_POINTER_ATI      0x876A
-#endif
-
-#ifndef GL_SUN_mesh_array
-#define GL_QUAD_MESH_SUN                  0x8614
-#define GL_TRIANGLE_MESH_SUN              0x8615
-#endif
-
-#ifndef GL_SUN_slice_accum
-#define GL_SLICE_ACCUM_SUN                0x85CC
-#endif
-
-#ifndef GL_NV_multisample_filter_hint
-#define GL_MULTISAMPLE_FILTER_HINT_NV     0x8534
-#endif
-
-#ifndef GL_NV_depth_clamp
-#define GL_DEPTH_CLAMP_NV                 0x864F
-#endif
-
-#ifndef GL_NV_occlusion_query
-#define GL_PIXEL_COUNTER_BITS_NV          0x8864
-#define GL_CURRENT_OCCLUSION_QUERY_ID_NV  0x8865
-#define GL_PIXEL_COUNT_NV                 0x8866
-#define GL_PIXEL_COUNT_AVAILABLE_NV       0x8867
-#endif
-
-#ifndef GL_NV_point_sprite
-#define GL_POINT_SPRITE_NV                0x8861
-#define GL_COORD_REPLACE_NV               0x8862
-#define GL_POINT_SPRITE_R_MODE_NV         0x8863
-#endif
-
-#ifndef GL_NV_texture_shader3
-#define GL_OFFSET_PROJECTIVE_TEXTURE_2D_NV 0x8850
-#define GL_OFFSET_PROJECTIVE_TEXTURE_2D_SCALE_NV 0x8851
-#define GL_OFFSET_PROJECTIVE_TEXTURE_RECTANGLE_NV 0x8852
-#define GL_OFFSET_PROJECTIVE_TEXTURE_RECTANGLE_SCALE_NV 0x8853
-#define GL_OFFSET_HILO_TEXTURE_2D_NV      0x8854
-#define GL_OFFSET_HILO_TEXTURE_RECTANGLE_NV 0x8855
-#define GL_OFFSET_HILO_PROJECTIVE_TEXTURE_2D_NV 0x8856
-#define GL_OFFSET_HILO_PROJECTIVE_TEXTURE_RECTANGLE_NV 0x8857
-#define GL_DEPENDENT_HILO_TEXTURE_2D_NV   0x8858
-#define GL_DEPENDENT_RGB_TEXTURE_3D_NV    0x8859
-#define GL_DEPENDENT_RGB_TEXTURE_CUBE_MAP_NV 0x885A
-#define GL_DOT_PRODUCT_PASS_THROUGH_NV    0x885B
-#define GL_DOT_PRODUCT_TEXTURE_1D_NV      0x885C
-#define GL_DOT_PRODUCT_AFFINE_DEPTH_REPLACE_NV 0x885D
-#define GL_HILO8_NV                       0x885E
-#define GL_SIGNED_HILO8_NV                0x885F
-#define GL_FORCE_BLUE_TO_ONE_NV           0x8860
-#endif
-
-#ifndef GL_NV_vertex_program1_1
-#endif
-
-#ifndef GL_EXT_shadow_funcs
-#endif
-
-#ifndef GL_EXT_stencil_two_side
-#define GL_STENCIL_TEST_TWO_SIDE_EXT      0x8910
-#define GL_ACTIVE_STENCIL_FACE_EXT        0x8911
-#endif
-
-#ifndef GL_ATI_text_fragment_shader
-#define GL_TEXT_FRAGMENT_SHADER_ATI       0x8200
-#endif
-
-#ifndef GL_APPLE_client_storage
-#define GL_UNPACK_CLIENT_STORAGE_APPLE    0x85B2
-#endif
-
-#ifndef GL_APPLE_element_array
-#define GL_ELEMENT_ARRAY_APPLE            0x8A0C
-#define GL_ELEMENT_ARRAY_TYPE_APPLE       0x8A0D
-#define GL_ELEMENT_ARRAY_POINTER_APPLE    0x8A0E
-#endif
-
-#ifndef GL_APPLE_fence
-#define GL_DRAW_PIXELS_APPLE              0x8A0A
-#define GL_FENCE_APPLE                    0x8A0B
-#endif
-
-#ifndef GL_APPLE_vertex_array_object
-#define GL_VERTEX_ARRAY_BINDING_APPLE     0x85B5
-#endif
-
-#ifndef GL_APPLE_vertex_array_range
-#define GL_VERTEX_ARRAY_RANGE_APPLE       0x851D
-#define GL_VERTEX_ARRAY_RANGE_LENGTH_APPLE 0x851E
-#define GL_VERTEX_ARRAY_STORAGE_HINT_APPLE 0x851F
-#define GL_VERTEX_ARRAY_RANGE_POINTER_APPLE 0x8521
-#define GL_STORAGE_CLIENT_APPLE           0x85B4
-#define GL_STORAGE_CACHED_APPLE           0x85BE
-#define GL_STORAGE_SHARED_APPLE           0x85BF
-#endif
-
-#ifndef GL_APPLE_ycbcr_422
-#define GL_YCBCR_422_APPLE                0x85B9
-#define GL_UNSIGNED_SHORT_8_8_APPLE       0x85BA
-#define GL_UNSIGNED_SHORT_8_8_REV_APPLE   0x85BB
-#endif
-
-#ifndef GL_S3_s3tc
-#define GL_RGB_S3TC                       0x83A0
-#define GL_RGB4_S3TC                      0x83A1
-#define GL_RGBA_S3TC                      0x83A2
-#define GL_RGBA4_S3TC                     0x83A3
-#define GL_RGBA_DXT5_S3TC                 0x83A4
-#define GL_RGBA4_DXT5_S3TC                0x83A5
-#endif
-
-#ifndef GL_ATI_draw_buffers
-#define GL_MAX_DRAW_BUFFERS_ATI           0x8824
-#define GL_DRAW_BUFFER0_ATI               0x8825
-#define GL_DRAW_BUFFER1_ATI               0x8826
-#define GL_DRAW_BUFFER2_ATI               0x8827
-#define GL_DRAW_BUFFER3_ATI               0x8828
-#define GL_DRAW_BUFFER4_ATI               0x8829
-#define GL_DRAW_BUFFER5_ATI               0x882A
-#define GL_DRAW_BUFFER6_ATI               0x882B
-#define GL_DRAW_BUFFER7_ATI               0x882C
-#define GL_DRAW_BUFFER8_ATI               0x882D
-#define GL_DRAW_BUFFER9_ATI               0x882E
-#define GL_DRAW_BUFFER10_ATI              0x882F
-#define GL_DRAW_BUFFER11_ATI              0x8830
-#define GL_DRAW_BUFFER12_ATI              0x8831
-#define GL_DRAW_BUFFER13_ATI              0x8832
-#define GL_DRAW_BUFFER14_ATI              0x8833
-#define GL_DRAW_BUFFER15_ATI              0x8834
-#endif
+#ifndef GL_EXT_422_pixels
+#define GL_EXT_422_pixels 1
+#define GL_422_EXT                        0x80CC
+#define GL_422_REV_EXT                    0x80CD
+#define GL_422_AVERAGE_EXT                0x80CE
+#define GL_422_REV_AVERAGE_EXT            0x80CF
+#endif /* GL_EXT_422_pixels */
 
-#ifndef GL_ATI_pixel_format_float
-#define GL_RGBA_FLOAT_MODE_ATI            0x8820
-#define GL_COLOR_CLEAR_UNCLAMPED_VALUE_ATI 0x8835
-#endif
+#ifndef GL_EXT_abgr
+#define GL_EXT_abgr 1
+#define GL_ABGR_EXT                       0x8000
+#endif /* GL_EXT_abgr */
 
-#ifndef GL_ATI_texture_env_combine3
-#define GL_MODULATE_ADD_ATI               0x8744
-#define GL_MODULATE_SIGNED_ADD_ATI        0x8745
-#define GL_MODULATE_SUBTRACT_ATI          0x8746
-#endif
+#ifndef GL_EXT_bgra
+#define GL_EXT_bgra 1
+#define GL_BGR_EXT                        0x80E0
+#define GL_BGRA_EXT                       0x80E1
+#endif /* GL_EXT_bgra */
 
-#ifndef GL_ATI_texture_float
-#define GL_RGBA_FLOAT32_ATI               0x8814
-#define GL_RGB_FLOAT32_ATI                0x8815
-#define GL_ALPHA_FLOAT32_ATI              0x8816
-#define GL_INTENSITY_FLOAT32_ATI          0x8817
-#define GL_LUMINANCE_FLOAT32_ATI          0x8818
-#define GL_LUMINANCE_ALPHA_FLOAT32_ATI    0x8819
-#define GL_RGBA_FLOAT16_ATI               0x881A
-#define GL_RGB_FLOAT16_ATI                0x881B
-#define GL_ALPHA_FLOAT16_ATI              0x881C
-#define GL_INTENSITY_FLOAT16_ATI          0x881D
-#define GL_LUMINANCE_FLOAT16_ATI          0x881E
-#define GL_LUMINANCE_ALPHA_FLOAT16_ATI    0x881F
+#ifndef GL_EXT_bindable_uniform
+#define GL_EXT_bindable_uniform 1
+#define GL_MAX_VERTEX_BINDABLE_UNIFORMS_EXT 0x8DE2
+#define GL_MAX_FRAGMENT_BINDABLE_UNIFORMS_EXT 0x8DE3
+#define GL_MAX_GEOMETRY_BINDABLE_UNIFORMS_EXT 0x8DE4
+#define GL_MAX_BINDABLE_UNIFORM_SIZE_EXT  0x8DED
+#define GL_UNIFORM_BUFFER_EXT             0x8DEE
+#define GL_UNIFORM_BUFFER_BINDING_EXT     0x8DEF
+typedef void (APIENTRYP PFNGLUNIFORMBUFFEREXTPROC) (GLuint program, GLint location, GLuint buffer);
+typedef GLint (APIENTRYP PFNGLGETUNIFORMBUFFERSIZEEXTPROC) (GLuint program, GLint location);
+typedef GLintptr (APIENTRYP PFNGLGETUNIFORMOFFSETEXTPROC) (GLuint program, GLint location);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glUniformBufferEXT (GLuint program, GLint location, GLuint buffer);
+GLAPI GLint APIENTRY glGetUniformBufferSizeEXT (GLuint program, GLint location);
+GLAPI GLintptr APIENTRY glGetUniformOffsetEXT (GLuint program, GLint location);
 #endif
+#endif /* GL_EXT_bindable_uniform */
 
-#ifndef GL_NV_float_buffer
-#define GL_FLOAT_R_NV                     0x8880
-#define GL_FLOAT_RG_NV                    0x8881
-#define GL_FLOAT_RGB_NV                   0x8882
-#define GL_FLOAT_RGBA_NV                  0x8883
-#define GL_FLOAT_R16_NV                   0x8884
-#define GL_FLOAT_R32_NV                   0x8885
-#define GL_FLOAT_RG16_NV                  0x8886
-#define GL_FLOAT_RG32_NV                  0x8887
-#define GL_FLOAT_RGB16_NV                 0x8888
-#define GL_FLOAT_RGB32_NV                 0x8889
-#define GL_FLOAT_RGBA16_NV                0x888A
-#define GL_FLOAT_RGBA32_NV                0x888B
-#define GL_TEXTURE_FLOAT_COMPONENTS_NV    0x888C
-#define GL_FLOAT_CLEAR_COLOR_VALUE_NV     0x888D
-#define GL_FLOAT_RGBA_MODE_NV             0x888E
+#ifndef GL_EXT_blend_color
+#define GL_EXT_blend_color 1
+#define GL_CONSTANT_COLOR_EXT             0x8001
+#define GL_ONE_MINUS_CONSTANT_COLOR_EXT   0x8002
+#define GL_CONSTANT_ALPHA_EXT             0x8003
+#define GL_ONE_MINUS_CONSTANT_ALPHA_EXT   0x8004
+#define GL_BLEND_COLOR_EXT                0x8005
+typedef void (APIENTRYP PFNGLBLENDCOLOREXTPROC) (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendColorEXT (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
 #endif
+#endif /* GL_EXT_blend_color */
 
-#ifndef GL_NV_fragment_program
-#define GL_MAX_FRAGMENT_PROGRAM_LOCAL_PARAMETERS_NV 0x8868
-#define GL_FRAGMENT_PROGRAM_NV            0x8870
-#define GL_MAX_TEXTURE_COORDS_NV          0x8871
-#define GL_MAX_TEXTURE_IMAGE_UNITS_NV     0x8872
-#define GL_FRAGMENT_PROGRAM_BINDING_NV    0x8873
-#define GL_PROGRAM_ERROR_STRING_NV        0x8874
+#ifndef GL_EXT_blend_equation_separate
+#define GL_EXT_blend_equation_separate 1
+#define GL_BLEND_EQUATION_RGB_EXT         0x8009
+#define GL_BLEND_EQUATION_ALPHA_EXT       0x883D
+typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEEXTPROC) (GLenum modeRGB, GLenum modeAlpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendEquationSeparateEXT (GLenum modeRGB, GLenum modeAlpha);
 #endif
+#endif /* GL_EXT_blend_equation_separate */
 
-#ifndef GL_NV_half_float
-#define GL_HALF_FLOAT_NV                  0x140B
+#ifndef GL_EXT_blend_func_separate
+#define GL_EXT_blend_func_separate 1
+#define GL_BLEND_DST_RGB_EXT              0x80C8
+#define GL_BLEND_SRC_RGB_EXT              0x80C9
+#define GL_BLEND_DST_ALPHA_EXT            0x80CA
+#define GL_BLEND_SRC_ALPHA_EXT            0x80CB
+typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEEXTPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendFuncSeparateEXT (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
 #endif
+#endif /* GL_EXT_blend_func_separate */
 
-#ifndef GL_NV_pixel_data_range
-#define GL_WRITE_PIXEL_DATA_RANGE_NV      0x8878
-#define GL_READ_PIXEL_DATA_RANGE_NV       0x8879
-#define GL_WRITE_PIXEL_DATA_RANGE_LENGTH_NV 0x887A
-#define GL_READ_PIXEL_DATA_RANGE_LENGTH_NV 0x887B
-#define GL_WRITE_PIXEL_DATA_RANGE_POINTER_NV 0x887C
-#define GL_READ_PIXEL_DATA_RANGE_POINTER_NV 0x887D
-#endif
+#ifndef GL_EXT_blend_logic_op
+#define GL_EXT_blend_logic_op 1
+#endif /* GL_EXT_blend_logic_op */
 
-#ifndef GL_NV_primitive_restart
-#define GL_PRIMITIVE_RESTART_NV           0x8558
-#define GL_PRIMITIVE_RESTART_INDEX_NV     0x8559
+#ifndef GL_EXT_blend_minmax
+#define GL_EXT_blend_minmax 1
+#define GL_MIN_EXT                        0x8007
+#define GL_MAX_EXT                        0x8008
+#define GL_FUNC_ADD_EXT                   0x8006
+#define GL_BLEND_EQUATION_EXT             0x8009
+typedef void (APIENTRYP PFNGLBLENDEQUATIONEXTPROC) (GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendEquationEXT (GLenum mode);
 #endif
+#endif /* GL_EXT_blend_minmax */
 
-#ifndef GL_NV_texture_expand_normal
-#define GL_TEXTURE_UNSIGNED_REMAP_MODE_NV 0x888F
-#endif
+#ifndef GL_EXT_blend_subtract
+#define GL_EXT_blend_subtract 1
+#define GL_FUNC_SUBTRACT_EXT              0x800A
+#define GL_FUNC_REVERSE_SUBTRACT_EXT      0x800B
+#endif /* GL_EXT_blend_subtract */
 
-#ifndef GL_NV_vertex_program2
-#endif
+#ifndef GL_EXT_clip_volume_hint
+#define GL_EXT_clip_volume_hint 1
+#define GL_CLIP_VOLUME_CLIPPING_HINT_EXT  0x80F0
+#endif /* GL_EXT_clip_volume_hint */
 
-#ifndef GL_ATI_map_object_buffer
-#endif
+#ifndef GL_EXT_cmyka
+#define GL_EXT_cmyka 1
+#define GL_CMYK_EXT                       0x800C
+#define GL_CMYKA_EXT                      0x800D
+#define GL_PACK_CMYK_HINT_EXT             0x800E
+#define GL_UNPACK_CMYK_HINT_EXT           0x800F
+#endif /* GL_EXT_cmyka */
 
-#ifndef GL_ATI_separate_stencil
-#define GL_STENCIL_BACK_FUNC_ATI          0x8800
-#define GL_STENCIL_BACK_FAIL_ATI          0x8801
-#define GL_STENCIL_BACK_PASS_DEPTH_FAIL_ATI 0x8802
-#define GL_STENCIL_BACK_PASS_DEPTH_PASS_ATI 0x8803
+#ifndef GL_EXT_color_subtable
+#define GL_EXT_color_subtable 1
+typedef void (APIENTRYP PFNGLCOLORSUBTABLEEXTPROC) (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLCOPYCOLORSUBTABLEEXTPROC) (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glColorSubTableEXT (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glCopyColorSubTableEXT (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
 #endif
+#endif /* GL_EXT_color_subtable */
 
-#ifndef GL_ATI_vertex_attrib_array_object
+#ifndef GL_EXT_compiled_vertex_array
+#define GL_EXT_compiled_vertex_array 1
+#define GL_ARRAY_ELEMENT_LOCK_FIRST_EXT   0x81A8
+#define GL_ARRAY_ELEMENT_LOCK_COUNT_EXT   0x81A9
+typedef void (APIENTRYP PFNGLLOCKARRAYSEXTPROC) (GLint first, GLsizei count);
+typedef void (APIENTRYP PFNGLUNLOCKARRAYSEXTPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glLockArraysEXT (GLint first, GLsizei count);
+GLAPI void APIENTRY glUnlockArraysEXT (void);
 #endif
+#endif /* GL_EXT_compiled_vertex_array */
 
-#ifndef GL_OES_byte_coordinates
+#ifndef GL_EXT_convolution
+#define GL_EXT_convolution 1
+#define GL_CONVOLUTION_1D_EXT             0x8010
+#define GL_CONVOLUTION_2D_EXT             0x8011
+#define GL_SEPARABLE_2D_EXT               0x8012
+#define GL_CONVOLUTION_BORDER_MODE_EXT    0x8013
+#define GL_CONVOLUTION_FILTER_SCALE_EXT   0x8014
+#define GL_CONVOLUTION_FILTER_BIAS_EXT    0x8015
+#define GL_REDUCE_EXT                     0x8016
+#define GL_CONVOLUTION_FORMAT_EXT         0x8017
+#define GL_CONVOLUTION_WIDTH_EXT          0x8018
+#define GL_CONVOLUTION_HEIGHT_EXT         0x8019
+#define GL_MAX_CONVOLUTION_WIDTH_EXT      0x801A
+#define GL_MAX_CONVOLUTION_HEIGHT_EXT     0x801B
+#define GL_POST_CONVOLUTION_RED_SCALE_EXT 0x801C
+#define GL_POST_CONVOLUTION_GREEN_SCALE_EXT 0x801D
+#define GL_POST_CONVOLUTION_BLUE_SCALE_EXT 0x801E
+#define GL_POST_CONVOLUTION_ALPHA_SCALE_EXT 0x801F
+#define GL_POST_CONVOLUTION_RED_BIAS_EXT  0x8020
+#define GL_POST_CONVOLUTION_GREEN_BIAS_EXT 0x8021
+#define GL_POST_CONVOLUTION_BLUE_BIAS_EXT 0x8022
+#define GL_POST_CONVOLUTION_ALPHA_BIAS_EXT 0x8023
+typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER1DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *image);
+typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *image);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFEXTPROC) (GLenum target, GLenum pname, GLfloat params);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFVEXTPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIEXTPROC) (GLenum target, GLenum pname, GLint params);
+typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER1DEXTPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONFILTEREXTPROC) (GLenum target, GLenum format, GLenum type, void *image);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETSEPARABLEFILTEREXTPROC) (GLenum target, GLenum format, GLenum type, void *row, void *column, void *span);
+typedef void (APIENTRYP PFNGLSEPARABLEFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *row, const void *column);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glConvolutionFilter1DEXT (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *image);
+GLAPI void APIENTRY glConvolutionFilter2DEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *image);
+GLAPI void APIENTRY glConvolutionParameterfEXT (GLenum target, GLenum pname, GLfloat params);
+GLAPI void APIENTRY glConvolutionParameterfvEXT (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glConvolutionParameteriEXT (GLenum target, GLenum pname, GLint params);
+GLAPI void APIENTRY glConvolutionParameterivEXT (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glCopyConvolutionFilter1DEXT (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glCopyConvolutionFilter2DEXT (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetConvolutionFilterEXT (GLenum target, GLenum format, GLenum type, void *image);
+GLAPI void APIENTRY glGetConvolutionParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetConvolutionParameterivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetSeparableFilterEXT (GLenum target, GLenum format, GLenum type, void *row, void *column, void *span);
+GLAPI void APIENTRY glSeparableFilter2DEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *row, const void *column);
 #endif
+#endif /* GL_EXT_convolution */
 
-#ifndef GL_OES_fixed_point
-#define GL_FIXED_OES                      0x140C
+#ifndef GL_EXT_coordinate_frame
+#define GL_EXT_coordinate_frame 1
+#define GL_TANGENT_ARRAY_EXT              0x8439
+#define GL_BINORMAL_ARRAY_EXT             0x843A
+#define GL_CURRENT_TANGENT_EXT            0x843B
+#define GL_CURRENT_BINORMAL_EXT           0x843C
+#define GL_TANGENT_ARRAY_TYPE_EXT         0x843E
+#define GL_TANGENT_ARRAY_STRIDE_EXT       0x843F
+#define GL_BINORMAL_ARRAY_TYPE_EXT        0x8440
+#define GL_BINORMAL_ARRAY_STRIDE_EXT      0x8441
+#define GL_TANGENT_ARRAY_POINTER_EXT      0x8442
+#define GL_BINORMAL_ARRAY_POINTER_EXT     0x8443
+#define GL_MAP1_TANGENT_EXT               0x8444
+#define GL_MAP2_TANGENT_EXT               0x8445
+#define GL_MAP1_BINORMAL_EXT              0x8446
+#define GL_MAP2_BINORMAL_EXT              0x8447
+typedef void (APIENTRYP PFNGLTANGENT3BEXTPROC) (GLbyte tx, GLbyte ty, GLbyte tz);
+typedef void (APIENTRYP PFNGLTANGENT3BVEXTPROC) (const GLbyte *v);
+typedef void (APIENTRYP PFNGLTANGENT3DEXTPROC) (GLdouble tx, GLdouble ty, GLdouble tz);
+typedef void (APIENTRYP PFNGLTANGENT3DVEXTPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLTANGENT3FEXTPROC) (GLfloat tx, GLfloat ty, GLfloat tz);
+typedef void (APIENTRYP PFNGLTANGENT3FVEXTPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLTANGENT3IEXTPROC) (GLint tx, GLint ty, GLint tz);
+typedef void (APIENTRYP PFNGLTANGENT3IVEXTPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLTANGENT3SEXTPROC) (GLshort tx, GLshort ty, GLshort tz);
+typedef void (APIENTRYP PFNGLTANGENT3SVEXTPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLBINORMAL3BEXTPROC) (GLbyte bx, GLbyte by, GLbyte bz);
+typedef void (APIENTRYP PFNGLBINORMAL3BVEXTPROC) (const GLbyte *v);
+typedef void (APIENTRYP PFNGLBINORMAL3DEXTPROC) (GLdouble bx, GLdouble by, GLdouble bz);
+typedef void (APIENTRYP PFNGLBINORMAL3DVEXTPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLBINORMAL3FEXTPROC) (GLfloat bx, GLfloat by, GLfloat bz);
+typedef void (APIENTRYP PFNGLBINORMAL3FVEXTPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLBINORMAL3IEXTPROC) (GLint bx, GLint by, GLint bz);
+typedef void (APIENTRYP PFNGLBINORMAL3IVEXTPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLBINORMAL3SEXTPROC) (GLshort bx, GLshort by, GLshort bz);
+typedef void (APIENTRYP PFNGLBINORMAL3SVEXTPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLTANGENTPOINTEREXTPROC) (GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLBINORMALPOINTEREXTPROC) (GLenum type, GLsizei stride, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTangent3bEXT (GLbyte tx, GLbyte ty, GLbyte tz);
+GLAPI void APIENTRY glTangent3bvEXT (const GLbyte *v);
+GLAPI void APIENTRY glTangent3dEXT (GLdouble tx, GLdouble ty, GLdouble tz);
+GLAPI void APIENTRY glTangent3dvEXT (const GLdouble *v);
+GLAPI void APIENTRY glTangent3fEXT (GLfloat tx, GLfloat ty, GLfloat tz);
+GLAPI void APIENTRY glTangent3fvEXT (const GLfloat *v);
+GLAPI void APIENTRY glTangent3iEXT (GLint tx, GLint ty, GLint tz);
+GLAPI void APIENTRY glTangent3ivEXT (const GLint *v);
+GLAPI void APIENTRY glTangent3sEXT (GLshort tx, GLshort ty, GLshort tz);
+GLAPI void APIENTRY glTangent3svEXT (const GLshort *v);
+GLAPI void APIENTRY glBinormal3bEXT (GLbyte bx, GLbyte by, GLbyte bz);
+GLAPI void APIENTRY glBinormal3bvEXT (const GLbyte *v);
+GLAPI void APIENTRY glBinormal3dEXT (GLdouble bx, GLdouble by, GLdouble bz);
+GLAPI void APIENTRY glBinormal3dvEXT (const GLdouble *v);
+GLAPI void APIENTRY glBinormal3fEXT (GLfloat bx, GLfloat by, GLfloat bz);
+GLAPI void APIENTRY glBinormal3fvEXT (const GLfloat *v);
+GLAPI void APIENTRY glBinormal3iEXT (GLint bx, GLint by, GLint bz);
+GLAPI void APIENTRY glBinormal3ivEXT (const GLint *v);
+GLAPI void APIENTRY glBinormal3sEXT (GLshort bx, GLshort by, GLshort bz);
+GLAPI void APIENTRY glBinormal3svEXT (const GLshort *v);
+GLAPI void APIENTRY glTangentPointerEXT (GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glBinormalPointerEXT (GLenum type, GLsizei stride, const void *pointer);
 #endif
+#endif /* GL_EXT_coordinate_frame */
 
-#ifndef GL_OES_single_precision
+#ifndef GL_EXT_copy_texture
+#define GL_EXT_copy_texture 1
+typedef void (APIENTRYP PFNGLCOPYTEXIMAGE1DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
+typedef void (APIENTRYP PFNGLCOPYTEXIMAGE2DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE1DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE2DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE3DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glCopyTexImage1DEXT (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
+GLAPI void APIENTRY glCopyTexImage2DEXT (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+GLAPI void APIENTRY glCopyTexSubImage1DEXT (GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glCopyTexSubImage2DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glCopyTexSubImage3DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
 #endif
+#endif /* GL_EXT_copy_texture */
 
-#ifndef GL_OES_compressed_paletted_texture
-#define GL_PALETTE4_RGB8_OES              0x8B90
-#define GL_PALETTE4_RGBA8_OES             0x8B91
-#define GL_PALETTE4_R5_G6_B5_OES          0x8B92
-#define GL_PALETTE4_RGBA4_OES             0x8B93
-#define GL_PALETTE4_RGB5_A1_OES           0x8B94
-#define GL_PALETTE8_RGB8_OES              0x8B95
-#define GL_PALETTE8_RGBA8_OES             0x8B96
-#define GL_PALETTE8_R5_G6_B5_OES          0x8B97
-#define GL_PALETTE8_RGBA4_OES             0x8B98
-#define GL_PALETTE8_RGB5_A1_OES           0x8B99
+#ifndef GL_EXT_cull_vertex
+#define GL_EXT_cull_vertex 1
+#define GL_CULL_VERTEX_EXT                0x81AA
+#define GL_CULL_VERTEX_EYE_POSITION_EXT   0x81AB
+#define GL_CULL_VERTEX_OBJECT_POSITION_EXT 0x81AC
+typedef void (APIENTRYP PFNGLCULLPARAMETERDVEXTPROC) (GLenum pname, GLdouble *params);
+typedef void (APIENTRYP PFNGLCULLPARAMETERFVEXTPROC) (GLenum pname, GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glCullParameterdvEXT (GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glCullParameterfvEXT (GLenum pname, GLfloat *params);
 #endif
+#endif /* GL_EXT_cull_vertex */
 
-#ifndef GL_OES_read_format
-#define GL_IMPLEMENTATION_COLOR_READ_TYPE_OES 0x8B9A
-#define GL_IMPLEMENTATION_COLOR_READ_FORMAT_OES 0x8B9B
+#ifndef GL_EXT_debug_label
+#define GL_EXT_debug_label 1
+#define GL_PROGRAM_PIPELINE_OBJECT_EXT    0x8A4F
+#define GL_PROGRAM_OBJECT_EXT             0x8B40
+#define GL_SHADER_OBJECT_EXT              0x8B48
+#define GL_BUFFER_OBJECT_EXT              0x9151
+#define GL_QUERY_OBJECT_EXT               0x9153
+#define GL_VERTEX_ARRAY_OBJECT_EXT        0x9154
+typedef void (APIENTRYP PFNGLLABELOBJECTEXTPROC) (GLenum type, GLuint object, GLsizei length, const GLchar *label);
+typedef void (APIENTRYP PFNGLGETOBJECTLABELEXTPROC) (GLenum type, GLuint object, GLsizei bufSize, GLsizei *length, GLchar *label);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glLabelObjectEXT (GLenum type, GLuint object, GLsizei length, const GLchar *label);
+GLAPI void APIENTRY glGetObjectLabelEXT (GLenum type, GLuint object, GLsizei bufSize, GLsizei *length, GLchar *label);
 #endif
+#endif /* GL_EXT_debug_label */
 
-#ifndef GL_OES_query_matrix
+#ifndef GL_EXT_debug_marker
+#define GL_EXT_debug_marker 1
+typedef void (APIENTRYP PFNGLINSERTEVENTMARKEREXTPROC) (GLsizei length, const GLchar *marker);
+typedef void (APIENTRYP PFNGLPUSHGROUPMARKEREXTPROC) (GLsizei length, const GLchar *marker);
+typedef void (APIENTRYP PFNGLPOPGROUPMARKEREXTPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glInsertEventMarkerEXT (GLsizei length, const GLchar *marker);
+GLAPI void APIENTRY glPushGroupMarkerEXT (GLsizei length, const GLchar *marker);
+GLAPI void APIENTRY glPopGroupMarkerEXT (void);
 #endif
+#endif /* GL_EXT_debug_marker */
 
 #ifndef GL_EXT_depth_bounds_test
+#define GL_EXT_depth_bounds_test 1
 #define GL_DEPTH_BOUNDS_TEST_EXT          0x8890
 #define GL_DEPTH_BOUNDS_EXT               0x8891
+typedef void (APIENTRYP PFNGLDEPTHBOUNDSEXTPROC) (GLclampd zmin, GLclampd zmax);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDepthBoundsEXT (GLclampd zmin, GLclampd zmax);
 #endif
+#endif /* GL_EXT_depth_bounds_test */
 
-#ifndef GL_EXT_texture_mirror_clamp
-#define GL_MIRROR_CLAMP_EXT               0x8742
-#define GL_MIRROR_CLAMP_TO_EDGE_EXT       0x8743
-#define GL_MIRROR_CLAMP_TO_BORDER_EXT     0x8912
-#endif
-
-#ifndef GL_EXT_blend_equation_separate
-#define GL_BLEND_EQUATION_RGB_EXT         0x8009
-#define GL_BLEND_EQUATION_ALPHA_EXT       0x883D
+#ifndef GL_EXT_direct_state_access
+#define GL_EXT_direct_state_access 1
+#define GL_PROGRAM_MATRIX_EXT             0x8E2D
+#define GL_TRANSPOSE_PROGRAM_MATRIX_EXT   0x8E2E
+#define GL_PROGRAM_MATRIX_STACK_DEPTH_EXT 0x8E2F
+typedef void (APIENTRYP PFNGLMATRIXLOADFEXTPROC) (GLenum mode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXLOADDEXTPROC) (GLenum mode, const GLdouble *m);
+typedef void (APIENTRYP PFNGLMATRIXMULTFEXTPROC) (GLenum mode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXMULTDEXTPROC) (GLenum mode, const GLdouble *m);
+typedef void (APIENTRYP PFNGLMATRIXLOADIDENTITYEXTPROC) (GLenum mode);
+typedef void (APIENTRYP PFNGLMATRIXROTATEFEXTPROC) (GLenum mode, GLfloat angle, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLMATRIXROTATEDEXTPROC) (GLenum mode, GLdouble angle, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLMATRIXSCALEFEXTPROC) (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLMATRIXSCALEDEXTPROC) (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLMATRIXTRANSLATEFEXTPROC) (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLMATRIXTRANSLATEDEXTPROC) (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLMATRIXFRUSTUMEXTPROC) (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
+typedef void (APIENTRYP PFNGLMATRIXORTHOEXTPROC) (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
+typedef void (APIENTRYP PFNGLMATRIXPOPEXTPROC) (GLenum mode);
+typedef void (APIENTRYP PFNGLMATRIXPUSHEXTPROC) (GLenum mode);
+typedef void (APIENTRYP PFNGLCLIENTATTRIBDEFAULTEXTPROC) (GLbitfield mask);
+typedef void (APIENTRYP PFNGLPUSHCLIENTATTRIBDEFAULTEXTPROC) (GLbitfield mask);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLCOPYTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
+typedef void (APIENTRYP PFNGLCOPYTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETTEXTUREIMAGEEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum format, GLenum type, void *pixels);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLBINDMULTITEXTUREEXTPROC) (GLenum texunit, GLenum target, GLuint texture);
+typedef void (APIENTRYP PFNGLMULTITEXCOORDPOINTEREXTPROC) (GLenum texunit, GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLMULTITEXENVFEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLMULTITEXENVFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLMULTITEXENVIEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLMULTITEXENVIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLMULTITEXGENDEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLdouble param);
+typedef void (APIENTRYP PFNGLMULTITEXGENDVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLdouble *params);
+typedef void (APIENTRYP PFNGLMULTITEXGENFEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLMULTITEXGENFVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLMULTITEXGENIEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLMULTITEXGENIVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXENVFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXENVIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXGENDVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXGENFVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXGENIVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLMULTITEXPARAMETERFEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLMULTITEXPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLCOPYMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
+typedef void (APIENTRYP PFNGLCOPYMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETMULTITEXIMAGEEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum format, GLenum type, void *pixels);
+typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXLEVELPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXLEVELPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLMULTITEXIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLENABLECLIENTSTATEINDEXEDEXTPROC) (GLenum array, GLuint index);
+typedef void (APIENTRYP PFNGLDISABLECLIENTSTATEINDEXEDEXTPROC) (GLenum array, GLuint index);
+typedef void (APIENTRYP PFNGLGETFLOATINDEXEDVEXTPROC) (GLenum target, GLuint index, GLfloat *data);
+typedef void (APIENTRYP PFNGLGETDOUBLEINDEXEDVEXTPROC) (GLenum target, GLuint index, GLdouble *data);
+typedef void (APIENTRYP PFNGLGETPOINTERINDEXEDVEXTPROC) (GLenum target, GLuint index, void **data);
+typedef void (APIENTRYP PFNGLENABLEINDEXEDEXTPROC) (GLenum target, GLuint index);
+typedef void (APIENTRYP PFNGLDISABLEINDEXEDEXTPROC) (GLenum target, GLuint index);
+typedef GLboolean (APIENTRYP PFNGLISENABLEDINDEXEDEXTPROC) (GLenum target, GLuint index);
+typedef void (APIENTRYP PFNGLGETINTEGERINDEXEDVEXTPROC) (GLenum target, GLuint index, GLint *data);
+typedef void (APIENTRYP PFNGLGETBOOLEANINDEXEDVEXTPROC) (GLenum target, GLuint index, GLboolean *data);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXTUREIMAGEEXTPROC) (GLuint texture, GLenum target, GLint lod, void *img);
+typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *bits);
+typedef void (APIENTRYP PFNGLGETCOMPRESSEDMULTITEXIMAGEEXTPROC) (GLenum texunit, GLenum target, GLint lod, void *img);
+typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSEFEXTPROC) (GLenum mode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSEDEXTPROC) (GLenum mode, const GLdouble *m);
+typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSEFEXTPROC) (GLenum mode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSEDEXTPROC) (GLenum mode, const GLdouble *m);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERDATAEXTPROC) (GLuint buffer, GLsizeiptr size, const void *data, GLenum usage);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr size, const void *data);
+typedef void *(APIENTRYP PFNGLMAPNAMEDBUFFEREXTPROC) (GLuint buffer, GLenum access);
+typedef GLboolean (APIENTRYP PFNGLUNMAPNAMEDBUFFEREXTPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERIVEXTPROC) (GLuint buffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPOINTERVEXTPROC) (GLuint buffer, GLenum pname, void **params);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr size, void *data);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FEXTPROC) (GLuint program, GLint location, GLfloat v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IEXTPROC) (GLuint program, GLint location, GLint v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+typedef void (APIENTRYP PFNGLTEXTUREBUFFEREXTPROC) (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer);
+typedef void (APIENTRYP PFNGLMULTITEXBUFFEREXTPROC) (GLenum texunit, GLenum target, GLenum internalformat, GLuint buffer);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIUIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIUIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIUIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIUIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIEXTPROC) (GLuint program, GLint location, GLuint v0);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERS4FVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLfloat *params);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4IEXTPROC) (GLuint program, GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4IVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLint *params);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERSI4IVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLint *params);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4UIEXTPROC) (GLuint program, GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4UIVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLuint *params);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERSI4UIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERIIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLint *params);
+typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERIUIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLuint *params);
+typedef void (APIENTRYP PFNGLENABLECLIENTSTATEIEXTPROC) (GLenum array, GLuint index);
+typedef void (APIENTRYP PFNGLDISABLECLIENTSTATEIEXTPROC) (GLenum array, GLuint index);
+typedef void (APIENTRYP PFNGLGETFLOATI_VEXTPROC) (GLenum pname, GLuint index, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETDOUBLEI_VEXTPROC) (GLenum pname, GLuint index, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETPOINTERI_VEXTPROC) (GLenum pname, GLuint index, void **params);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMSTRINGEXTPROC) (GLuint program, GLenum target, GLenum format, GLsizei len, const void *string);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4DEXTPROC) (GLuint program, GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4DVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLdouble *params);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4FEXTPROC) (GLuint program, GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4FVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERDVEXTPROC) (GLuint program, GLenum target, GLuint index, GLdouble *params);
+typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERFVEXTPROC) (GLuint program, GLenum target, GLuint index, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMIVEXTPROC) (GLuint program, GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMSTRINGEXTPROC) (GLuint program, GLenum target, GLenum pname, void *string);
+typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEEXTPROC) (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETNAMEDRENDERBUFFERPARAMETERIVEXTPROC) (GLuint renderbuffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLECOVERAGEEXTPROC) (GLuint renderbuffer, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
+typedef GLenum (APIENTRYP PFNGLCHECKNAMEDFRAMEBUFFERSTATUSEXTPROC) (GLuint framebuffer, GLenum target);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE1DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE2DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE3DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERRENDERBUFFEREXTPROC) (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERATTACHMENTPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGENERATETEXTUREMIPMAPEXTPROC) (GLuint texture, GLenum target);
+typedef void (APIENTRYP PFNGLGENERATEMULTITEXMIPMAPEXTPROC) (GLenum texunit, GLenum target);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERDRAWBUFFEREXTPROC) (GLuint framebuffer, GLenum mode);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERDRAWBUFFERSEXTPROC) (GLuint framebuffer, GLsizei n, const GLenum *bufs);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERREADBUFFEREXTPROC) (GLuint framebuffer, GLenum mode);
+typedef void (APIENTRYP PFNGLGETFRAMEBUFFERPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLNAMEDCOPYBUFFERSUBDATAEXTPROC) (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREEXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURELAYEREXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREFACEEXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLenum face);
+typedef void (APIENTRYP PFNGLTEXTURERENDERBUFFEREXTPROC) (GLuint texture, GLenum target, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLMULTITEXRENDERBUFFEREXTPROC) (GLenum texunit, GLenum target, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYCOLOROFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYEDGEFLAGOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYINDEXOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYNORMALOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYTEXCOORDOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYMULTITEXCOORDOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLenum texunit, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYFOGCOORDOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYSECONDARYCOLOROFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBIOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLENABLEVERTEXARRAYEXTPROC) (GLuint vaobj, GLenum array);
+typedef void (APIENTRYP PFNGLDISABLEVERTEXARRAYEXTPROC) (GLuint vaobj, GLenum array);
+typedef void (APIENTRYP PFNGLENABLEVERTEXARRAYATTRIBEXTPROC) (GLuint vaobj, GLuint index);
+typedef void (APIENTRYP PFNGLDISABLEVERTEXARRAYATTRIBEXTPROC) (GLuint vaobj, GLuint index);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYINTEGERVEXTPROC) (GLuint vaobj, GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYPOINTERVEXTPROC) (GLuint vaobj, GLenum pname, void **param);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYINTEGERI_VEXTPROC) (GLuint vaobj, GLuint index, GLenum pname, GLint *param);
+typedef void (APIENTRYP PFNGLGETVERTEXARRAYPOINTERI_VEXTPROC) (GLuint vaobj, GLuint index, GLenum pname, void **param);
+typedef void *(APIENTRYP PFNGLMAPNAMEDBUFFERRANGEEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length, GLbitfield access);
+typedef void (APIENTRYP PFNGLFLUSHMAPPEDNAMEDBUFFERRANGEEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length);
+typedef void (APIENTRYP PFNGLNAMEDBUFFERSTORAGEEXTPROC) (GLuint buffer, GLsizeiptr size, const void *data, GLbitfield flags);
+typedef void (APIENTRYP PFNGLCLEARNAMEDBUFFERDATAEXTPROC) (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLCLEARNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLenum internalformat, GLsizeiptr offset, GLsizeiptr size, GLenum format, GLenum type, const void *data);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERPARAMETERIEXTPROC) (GLuint framebuffer, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DEXTPROC) (GLuint program, GLint location, GLdouble x);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+typedef void (APIENTRYP PFNGLTEXTUREBUFFERRANGEEXTPROC) (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE1DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE2DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE2DMULTISAMPLEEXTPROC) (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLTEXTURESTORAGE3DMULTISAMPLEEXTPROC) (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+typedef void (APIENTRYP PFNGLVERTEXARRAYBINDVERTEXBUFFEREXTPROC) (GLuint vaobj, GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBFORMATEXTPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBIFORMATEXTPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBLFORMATEXTPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBBINDINGEXTPROC) (GLuint vaobj, GLuint attribindex, GLuint bindingindex);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXBINDINGDIVISOREXTPROC) (GLuint vaobj, GLuint bindingindex, GLuint divisor);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBLOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+typedef void (APIENTRYP PFNGLTEXTUREPAGECOMMITMENTEXTPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLboolean resident);
+typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBDIVISOREXTPROC) (GLuint vaobj, GLuint index, GLuint divisor);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMatrixLoadfEXT (GLenum mode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixLoaddEXT (GLenum mode, const GLdouble *m);
+GLAPI void APIENTRY glMatrixMultfEXT (GLenum mode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixMultdEXT (GLenum mode, const GLdouble *m);
+GLAPI void APIENTRY glMatrixLoadIdentityEXT (GLenum mode);
+GLAPI void APIENTRY glMatrixRotatefEXT (GLenum mode, GLfloat angle, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glMatrixRotatedEXT (GLenum mode, GLdouble angle, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glMatrixScalefEXT (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glMatrixScaledEXT (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glMatrixTranslatefEXT (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glMatrixTranslatedEXT (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glMatrixFrustumEXT (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
+GLAPI void APIENTRY glMatrixOrthoEXT (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
+GLAPI void APIENTRY glMatrixPopEXT (GLenum mode);
+GLAPI void APIENTRY glMatrixPushEXT (GLenum mode);
+GLAPI void APIENTRY glClientAttribDefaultEXT (GLbitfield mask);
+GLAPI void APIENTRY glPushClientAttribDefaultEXT (GLbitfield mask);
+GLAPI void APIENTRY glTextureParameterfEXT (GLuint texture, GLenum target, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glTextureParameterfvEXT (GLuint texture, GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glTextureParameteriEXT (GLuint texture, GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glTextureParameterivEXT (GLuint texture, GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLint internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glCopyTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
+GLAPI void APIENTRY glCopyTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+GLAPI void APIENTRY glCopyTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glCopyTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetTextureImageEXT (GLuint texture, GLenum target, GLint level, GLenum format, GLenum type, void *pixels);
+GLAPI void APIENTRY glGetTextureParameterfvEXT (GLuint texture, GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetTextureParameterivEXT (GLuint texture, GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetTextureLevelParameterfvEXT (GLuint texture, GLenum target, GLint level, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetTextureLevelParameterivEXT (GLuint texture, GLenum target, GLint level, GLenum pname, GLint *params);
+GLAPI void APIENTRY glTextureImage3DEXT (GLuint texture, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glCopyTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glBindMultiTextureEXT (GLenum texunit, GLenum target, GLuint texture);
+GLAPI void APIENTRY glMultiTexCoordPointerEXT (GLenum texunit, GLint size, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glMultiTexEnvfEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glMultiTexEnvfvEXT (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glMultiTexEnviEXT (GLenum texunit, GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glMultiTexEnvivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glMultiTexGendEXT (GLenum texunit, GLenum coord, GLenum pname, GLdouble param);
+GLAPI void APIENTRY glMultiTexGendvEXT (GLenum texunit, GLenum coord, GLenum pname, const GLdouble *params);
+GLAPI void APIENTRY glMultiTexGenfEXT (GLenum texunit, GLenum coord, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glMultiTexGenfvEXT (GLenum texunit, GLenum coord, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glMultiTexGeniEXT (GLenum texunit, GLenum coord, GLenum pname, GLint param);
+GLAPI void APIENTRY glMultiTexGenivEXT (GLenum texunit, GLenum coord, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glGetMultiTexEnvfvEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMultiTexEnvivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMultiTexGendvEXT (GLenum texunit, GLenum coord, GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glGetMultiTexGenfvEXT (GLenum texunit, GLenum coord, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMultiTexGenivEXT (GLenum texunit, GLenum coord, GLenum pname, GLint *params);
+GLAPI void APIENTRY glMultiTexParameteriEXT (GLenum texunit, GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glMultiTexParameterivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glMultiTexParameterfEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glMultiTexParameterfvEXT (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glCopyMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
+GLAPI void APIENTRY glCopyMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+GLAPI void APIENTRY glCopyMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glCopyMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetMultiTexImageEXT (GLenum texunit, GLenum target, GLint level, GLenum format, GLenum type, void *pixels);
+GLAPI void APIENTRY glGetMultiTexParameterfvEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMultiTexParameterivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMultiTexLevelParameterfvEXT (GLenum texunit, GLenum target, GLint level, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMultiTexLevelParameterivEXT (GLenum texunit, GLenum target, GLint level, GLenum pname, GLint *params);
+GLAPI void APIENTRY glMultiTexImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glCopyMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glEnableClientStateIndexedEXT (GLenum array, GLuint index);
+GLAPI void APIENTRY glDisableClientStateIndexedEXT (GLenum array, GLuint index);
+GLAPI void APIENTRY glGetFloatIndexedvEXT (GLenum target, GLuint index, GLfloat *data);
+GLAPI void APIENTRY glGetDoubleIndexedvEXT (GLenum target, GLuint index, GLdouble *data);
+GLAPI void APIENTRY glGetPointerIndexedvEXT (GLenum target, GLuint index, void **data);
+GLAPI void APIENTRY glEnableIndexedEXT (GLenum target, GLuint index);
+GLAPI void APIENTRY glDisableIndexedEXT (GLenum target, GLuint index);
+GLAPI GLboolean APIENTRY glIsEnabledIndexedEXT (GLenum target, GLuint index);
+GLAPI void APIENTRY glGetIntegerIndexedvEXT (GLenum target, GLuint index, GLint *data);
+GLAPI void APIENTRY glGetBooleanIndexedvEXT (GLenum target, GLuint index, GLboolean *data);
+GLAPI void APIENTRY glCompressedTextureImage3DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glGetCompressedTextureImageEXT (GLuint texture, GLenum target, GLint lod, void *img);
+GLAPI void APIENTRY glCompressedMultiTexImage3DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glCompressedMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const void *bits);
+GLAPI void APIENTRY glGetCompressedMultiTexImageEXT (GLenum texunit, GLenum target, GLint lod, void *img);
+GLAPI void APIENTRY glMatrixLoadTransposefEXT (GLenum mode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixLoadTransposedEXT (GLenum mode, const GLdouble *m);
+GLAPI void APIENTRY glMatrixMultTransposefEXT (GLenum mode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixMultTransposedEXT (GLenum mode, const GLdouble *m);
+GLAPI void APIENTRY glNamedBufferDataEXT (GLuint buffer, GLsizeiptr size, const void *data, GLenum usage);
+GLAPI void APIENTRY glNamedBufferSubDataEXT (GLuint buffer, GLintptr offset, GLsizeiptr size, const void *data);
+GLAPI void *APIENTRY glMapNamedBufferEXT (GLuint buffer, GLenum access);
+GLAPI GLboolean APIENTRY glUnmapNamedBufferEXT (GLuint buffer);
+GLAPI void APIENTRY glGetNamedBufferParameterivEXT (GLuint buffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetNamedBufferPointervEXT (GLuint buffer, GLenum pname, void **params);
+GLAPI void APIENTRY glGetNamedBufferSubDataEXT (GLuint buffer, GLintptr offset, GLsizeiptr size, void *data);
+GLAPI void APIENTRY glProgramUniform1fEXT (GLuint program, GLint location, GLfloat v0);
+GLAPI void APIENTRY glProgramUniform2fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1);
+GLAPI void APIENTRY glProgramUniform3fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
+GLAPI void APIENTRY glProgramUniform4fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
+GLAPI void APIENTRY glProgramUniform1iEXT (GLuint program, GLint location, GLint v0);
+GLAPI void APIENTRY glProgramUniform2iEXT (GLuint program, GLint location, GLint v0, GLint v1);
+GLAPI void APIENTRY glProgramUniform3iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
+GLAPI void APIENTRY glProgramUniform4iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
+GLAPI void APIENTRY glProgramUniform1fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform2fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform3fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform4fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniform1ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform2ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform3ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniform4ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
+GLAPI void APIENTRY glProgramUniformMatrix2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
+GLAPI void APIENTRY glTextureBufferEXT (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer);
+GLAPI void APIENTRY glMultiTexBufferEXT (GLenum texunit, GLenum target, GLenum internalformat, GLuint buffer);
+GLAPI void APIENTRY glTextureParameterIivEXT (GLuint texture, GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glTextureParameterIuivEXT (GLuint texture, GLenum target, GLenum pname, const GLuint *params);
+GLAPI void APIENTRY glGetTextureParameterIivEXT (GLuint texture, GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetTextureParameterIuivEXT (GLuint texture, GLenum target, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glMultiTexParameterIivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glMultiTexParameterIuivEXT (GLenum texunit, GLenum target, GLenum pname, const GLuint *params);
+GLAPI void APIENTRY glGetMultiTexParameterIivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMultiTexParameterIuivEXT (GLenum texunit, GLenum target, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glProgramUniform1uiEXT (GLuint program, GLint location, GLuint v0);
+GLAPI void APIENTRY glProgramUniform2uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1);
+GLAPI void APIENTRY glProgramUniform3uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
+GLAPI void APIENTRY glProgramUniform4uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+GLAPI void APIENTRY glProgramUniform1uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniform2uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniform3uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glProgramUniform4uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glNamedProgramLocalParameters4fvEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLfloat *params);
+GLAPI void APIENTRY glNamedProgramLocalParameterI4iEXT (GLuint program, GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
+GLAPI void APIENTRY glNamedProgramLocalParameterI4ivEXT (GLuint program, GLenum target, GLuint index, const GLint *params);
+GLAPI void APIENTRY glNamedProgramLocalParametersI4ivEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLint *params);
+GLAPI void APIENTRY glNamedProgramLocalParameterI4uiEXT (GLuint program, GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+GLAPI void APIENTRY glNamedProgramLocalParameterI4uivEXT (GLuint program, GLenum target, GLuint index, const GLuint *params);
+GLAPI void APIENTRY glNamedProgramLocalParametersI4uivEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLuint *params);
+GLAPI void APIENTRY glGetNamedProgramLocalParameterIivEXT (GLuint program, GLenum target, GLuint index, GLint *params);
+GLAPI void APIENTRY glGetNamedProgramLocalParameterIuivEXT (GLuint program, GLenum target, GLuint index, GLuint *params);
+GLAPI void APIENTRY glEnableClientStateiEXT (GLenum array, GLuint index);
+GLAPI void APIENTRY glDisableClientStateiEXT (GLenum array, GLuint index);
+GLAPI void APIENTRY glGetFloati_vEXT (GLenum pname, GLuint index, GLfloat *params);
+GLAPI void APIENTRY glGetDoublei_vEXT (GLenum pname, GLuint index, GLdouble *params);
+GLAPI void APIENTRY glGetPointeri_vEXT (GLenum pname, GLuint index, void **params);
+GLAPI void APIENTRY glNamedProgramStringEXT (GLuint program, GLenum target, GLenum format, GLsizei len, const void *string);
+GLAPI void APIENTRY glNamedProgramLocalParameter4dEXT (GLuint program, GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glNamedProgramLocalParameter4dvEXT (GLuint program, GLenum target, GLuint index, const GLdouble *params);
+GLAPI void APIENTRY glNamedProgramLocalParameter4fEXT (GLuint program, GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glNamedProgramLocalParameter4fvEXT (GLuint program, GLenum target, GLuint index, const GLfloat *params);
+GLAPI void APIENTRY glGetNamedProgramLocalParameterdvEXT (GLuint program, GLenum target, GLuint index, GLdouble *params);
+GLAPI void APIENTRY glGetNamedProgramLocalParameterfvEXT (GLuint program, GLenum target, GLuint index, GLfloat *params);
+GLAPI void APIENTRY glGetNamedProgramivEXT (GLuint program, GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetNamedProgramStringEXT (GLuint program, GLenum target, GLenum pname, void *string);
+GLAPI void APIENTRY glNamedRenderbufferStorageEXT (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetNamedRenderbufferParameterivEXT (GLuint renderbuffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glNamedRenderbufferStorageMultisampleEXT (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glNamedRenderbufferStorageMultisampleCoverageEXT (GLuint renderbuffer, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI GLenum APIENTRY glCheckNamedFramebufferStatusEXT (GLuint framebuffer, GLenum target);
+GLAPI void APIENTRY glNamedFramebufferTexture1DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GLAPI void APIENTRY glNamedFramebufferTexture2DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GLAPI void APIENTRY glNamedFramebufferTexture3DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
+GLAPI void APIENTRY glNamedFramebufferRenderbufferEXT (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+GLAPI void APIENTRY glGetNamedFramebufferAttachmentParameterivEXT (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGenerateTextureMipmapEXT (GLuint texture, GLenum target);
+GLAPI void APIENTRY glGenerateMultiTexMipmapEXT (GLenum texunit, GLenum target);
+GLAPI void APIENTRY glFramebufferDrawBufferEXT (GLuint framebuffer, GLenum mode);
+GLAPI void APIENTRY glFramebufferDrawBuffersEXT (GLuint framebuffer, GLsizei n, const GLenum *bufs);
+GLAPI void APIENTRY glFramebufferReadBufferEXT (GLuint framebuffer, GLenum mode);
+GLAPI void APIENTRY glGetFramebufferParameterivEXT (GLuint framebuffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glNamedCopyBufferSubDataEXT (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
+GLAPI void APIENTRY glNamedFramebufferTextureEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level);
+GLAPI void APIENTRY glNamedFramebufferTextureLayerEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer);
+GLAPI void APIENTRY glNamedFramebufferTextureFaceEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLenum face);
+GLAPI void APIENTRY glTextureRenderbufferEXT (GLuint texture, GLenum target, GLuint renderbuffer);
+GLAPI void APIENTRY glMultiTexRenderbufferEXT (GLenum texunit, GLenum target, GLuint renderbuffer);
+GLAPI void APIENTRY glVertexArrayVertexOffsetEXT (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayColorOffsetEXT (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayEdgeFlagOffsetEXT (GLuint vaobj, GLuint buffer, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayIndexOffsetEXT (GLuint vaobj, GLuint buffer, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayNormalOffsetEXT (GLuint vaobj, GLuint buffer, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayTexCoordOffsetEXT (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayMultiTexCoordOffsetEXT (GLuint vaobj, GLuint buffer, GLenum texunit, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayFogCoordOffsetEXT (GLuint vaobj, GLuint buffer, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArraySecondaryColorOffsetEXT (GLuint vaobj, GLuint buffer, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayVertexAttribOffsetEXT (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glVertexArrayVertexAttribIOffsetEXT (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glEnableVertexArrayEXT (GLuint vaobj, GLenum array);
+GLAPI void APIENTRY glDisableVertexArrayEXT (GLuint vaobj, GLenum array);
+GLAPI void APIENTRY glEnableVertexArrayAttribEXT (GLuint vaobj, GLuint index);
+GLAPI void APIENTRY glDisableVertexArrayAttribEXT (GLuint vaobj, GLuint index);
+GLAPI void APIENTRY glGetVertexArrayIntegervEXT (GLuint vaobj, GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetVertexArrayPointervEXT (GLuint vaobj, GLenum pname, void **param);
+GLAPI void APIENTRY glGetVertexArrayIntegeri_vEXT (GLuint vaobj, GLuint index, GLenum pname, GLint *param);
+GLAPI void APIENTRY glGetVertexArrayPointeri_vEXT (GLuint vaobj, GLuint index, GLenum pname, void **param);
+GLAPI void *APIENTRY glMapNamedBufferRangeEXT (GLuint buffer, GLintptr offset, GLsizeiptr length, GLbitfield access);
+GLAPI void APIENTRY glFlushMappedNamedBufferRangeEXT (GLuint buffer, GLintptr offset, GLsizeiptr length);
+GLAPI void APIENTRY glNamedBufferStorageEXT (GLuint buffer, GLsizeiptr size, const void *data, GLbitfield flags);
+GLAPI void APIENTRY glClearNamedBufferDataEXT (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glClearNamedBufferSubDataEXT (GLuint buffer, GLenum internalformat, GLsizeiptr offset, GLsizeiptr size, GLenum format, GLenum type, const void *data);
+GLAPI void APIENTRY glNamedFramebufferParameteriEXT (GLuint framebuffer, GLenum pname, GLint param);
+GLAPI void APIENTRY glGetNamedFramebufferParameterivEXT (GLuint framebuffer, GLenum pname, GLint *params);
+GLAPI void APIENTRY glProgramUniform1dEXT (GLuint program, GLint location, GLdouble x);
+GLAPI void APIENTRY glProgramUniform2dEXT (GLuint program, GLint location, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glProgramUniform3dEXT (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glProgramUniform4dEXT (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glProgramUniform1dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform2dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform3dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniform4dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix2x4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix3x4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glProgramUniformMatrix4x3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
+GLAPI void APIENTRY glTextureBufferRangeEXT (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
+GLAPI void APIENTRY glTextureStorage1DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
+GLAPI void APIENTRY glTextureStorage2DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glTextureStorage3DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
+GLAPI void APIENTRY glTextureStorage2DMultisampleEXT (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glTextureStorage3DMultisampleEXT (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
+GLAPI void APIENTRY glVertexArrayBindVertexBufferEXT (GLuint vaobj, GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
+GLAPI void APIENTRY glVertexArrayVertexAttribFormatEXT (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexArrayVertexAttribIFormatEXT (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexArrayVertexAttribLFormatEXT (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
+GLAPI void APIENTRY glVertexArrayVertexAttribBindingEXT (GLuint vaobj, GLuint attribindex, GLuint bindingindex);
+GLAPI void APIENTRY glVertexArrayVertexBindingDivisorEXT (GLuint vaobj, GLuint bindingindex, GLuint divisor);
+GLAPI void APIENTRY glVertexArrayVertexAttribLOffsetEXT (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset);
+GLAPI void APIENTRY glTexturePageCommitmentEXT (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLboolean resident);
+GLAPI void APIENTRY glVertexArrayVertexAttribDivisorEXT (GLuint vaobj, GLuint index, GLuint divisor);
 #endif
+#endif /* GL_EXT_direct_state_access */
 
-#ifndef GL_MESA_pack_invert
-#define GL_PACK_INVERT_MESA               0x8758
+#ifndef GL_EXT_draw_buffers2
+#define GL_EXT_draw_buffers2 1
+typedef void (APIENTRYP PFNGLCOLORMASKINDEXEDEXTPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glColorMaskIndexedEXT (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
 #endif
+#endif /* GL_EXT_draw_buffers2 */
 
-#ifndef GL_MESA_ycbcr_texture
-#define GL_UNSIGNED_SHORT_8_8_MESA        0x85BA
-#define GL_UNSIGNED_SHORT_8_8_REV_MESA    0x85BB
-#define GL_YCBCR_MESA                     0x8757
+#ifndef GL_EXT_draw_instanced
+#define GL_EXT_draw_instanced 1
+typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDEXTPROC) (GLenum mode, GLint start, GLsizei count, GLsizei primcount);
+typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDEXTPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawArraysInstancedEXT (GLenum mode, GLint start, GLsizei count, GLsizei primcount);
+GLAPI void APIENTRY glDrawElementsInstancedEXT (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei primcount);
 #endif
+#endif /* GL_EXT_draw_instanced */
 
-#ifndef GL_EXT_pixel_buffer_object
-#define GL_PIXEL_PACK_BUFFER_EXT          0x88EB
-#define GL_PIXEL_UNPACK_BUFFER_EXT        0x88EC
-#define GL_PIXEL_PACK_BUFFER_BINDING_EXT  0x88ED
-#define GL_PIXEL_UNPACK_BUFFER_BINDING_EXT 0x88EF
+#ifndef GL_EXT_draw_range_elements
+#define GL_EXT_draw_range_elements 1
+#define GL_MAX_ELEMENTS_VERTICES_EXT      0x80E8
+#define GL_MAX_ELEMENTS_INDICES_EXT       0x80E9
+typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSEXTPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const void *indices);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawRangeElementsEXT (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const void *indices);
 #endif
+#endif /* GL_EXT_draw_range_elements */
 
-#ifndef GL_NV_fragment_program_option
+#ifndef GL_EXT_fog_coord
+#define GL_EXT_fog_coord 1
+#define GL_FOG_COORDINATE_SOURCE_EXT      0x8450
+#define GL_FOG_COORDINATE_EXT             0x8451
+#define GL_FRAGMENT_DEPTH_EXT             0x8452
+#define GL_CURRENT_FOG_COORDINATE_EXT     0x8453
+#define GL_FOG_COORDINATE_ARRAY_TYPE_EXT  0x8454
+#define GL_FOG_COORDINATE_ARRAY_STRIDE_EXT 0x8455
+#define GL_FOG_COORDINATE_ARRAY_POINTER_EXT 0x8456
+#define GL_FOG_COORDINATE_ARRAY_EXT       0x8457
+typedef void (APIENTRYP PFNGLFOGCOORDFEXTPROC) (GLfloat coord);
+typedef void (APIENTRYP PFNGLFOGCOORDFVEXTPROC) (const GLfloat *coord);
+typedef void (APIENTRYP PFNGLFOGCOORDDEXTPROC) (GLdouble coord);
+typedef void (APIENTRYP PFNGLFOGCOORDDVEXTPROC) (const GLdouble *coord);
+typedef void (APIENTRYP PFNGLFOGCOORDPOINTEREXTPROC) (GLenum type, GLsizei stride, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glFogCoordfEXT (GLfloat coord);
+GLAPI void APIENTRY glFogCoordfvEXT (const GLfloat *coord);
+GLAPI void APIENTRY glFogCoorddEXT (GLdouble coord);
+GLAPI void APIENTRY glFogCoorddvEXT (const GLdouble *coord);
+GLAPI void APIENTRY glFogCoordPointerEXT (GLenum type, GLsizei stride, const void *pointer);
 #endif
+#endif /* GL_EXT_fog_coord */
 
-#ifndef GL_NV_fragment_program2
-#define GL_MAX_PROGRAM_EXEC_INSTRUCTIONS_NV 0x88F4
-#define GL_MAX_PROGRAM_CALL_DEPTH_NV      0x88F5
-#define GL_MAX_PROGRAM_IF_DEPTH_NV        0x88F6
-#define GL_MAX_PROGRAM_LOOP_DEPTH_NV      0x88F7
-#define GL_MAX_PROGRAM_LOOP_COUNT_NV      0x88F8
+#ifndef GL_EXT_framebuffer_blit
+#define GL_EXT_framebuffer_blit 1
+#define GL_READ_FRAMEBUFFER_EXT           0x8CA8
+#define GL_DRAW_FRAMEBUFFER_EXT           0x8CA9
+#define GL_DRAW_FRAMEBUFFER_BINDING_EXT   0x8CA6
+#define GL_READ_FRAMEBUFFER_BINDING_EXT   0x8CAA
+typedef void (APIENTRYP PFNGLBLITFRAMEBUFFEREXTPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlitFramebufferEXT (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
 #endif
+#endif /* GL_EXT_framebuffer_blit */
 
-#ifndef GL_NV_vertex_program2_option
-/* reuse GL_MAX_PROGRAM_EXEC_INSTRUCTIONS_NV */
-/* reuse GL_MAX_PROGRAM_CALL_DEPTH_NV */
+#ifndef GL_EXT_framebuffer_multisample
+#define GL_EXT_framebuffer_multisample 1
+#define GL_RENDERBUFFER_SAMPLES_EXT       0x8CAB
+#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT 0x8D56
+#define GL_MAX_SAMPLES_EXT                0x8D57
+typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glRenderbufferStorageMultisampleEXT (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
 #endif
+#endif /* GL_EXT_framebuffer_multisample */
 
-#ifndef GL_NV_vertex_program3
-/* reuse GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS_ARB */
-#endif
+#ifndef GL_EXT_framebuffer_multisample_blit_scaled
+#define GL_EXT_framebuffer_multisample_blit_scaled 1
+#define GL_SCALED_RESOLVE_FASTEST_EXT     0x90BA
+#define GL_SCALED_RESOLVE_NICEST_EXT      0x90BB
+#endif /* GL_EXT_framebuffer_multisample_blit_scaled */
 
 #ifndef GL_EXT_framebuffer_object
+#define GL_EXT_framebuffer_object 1
 #define GL_INVALID_FRAMEBUFFER_OPERATION_EXT 0x0506
 #define GL_MAX_RENDERBUFFER_SIZE_EXT      0x84E8
 #define GL_FRAMEBUFFER_BINDING_EXT        0x8CA6
@@ -5151,134 +7104,91 @@ extern "C" {
 #define GL_RENDERBUFFER_ALPHA_SIZE_EXT    0x8D53
 #define GL_RENDERBUFFER_DEPTH_SIZE_EXT    0x8D54
 #define GL_RENDERBUFFER_STENCIL_SIZE_EXT  0x8D55
+typedef GLboolean (APIENTRYP PFNGLISRENDERBUFFEREXTPROC) (GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLBINDRENDERBUFFEREXTPROC) (GLenum target, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLDELETERENDERBUFFERSEXTPROC) (GLsizei n, const GLuint *renderbuffers);
+typedef void (APIENTRYP PFNGLGENRENDERBUFFERSEXTPROC) (GLsizei n, GLuint *renderbuffers);
+typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
+typedef void (APIENTRYP PFNGLGETRENDERBUFFERPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef GLboolean (APIENTRYP PFNGLISFRAMEBUFFEREXTPROC) (GLuint framebuffer);
+typedef void (APIENTRYP PFNGLBINDFRAMEBUFFEREXTPROC) (GLenum target, GLuint framebuffer);
+typedef void (APIENTRYP PFNGLDELETEFRAMEBUFFERSEXTPROC) (GLsizei n, const GLuint *framebuffers);
+typedef void (APIENTRYP PFNGLGENFRAMEBUFFERSEXTPROC) (GLsizei n, GLuint *framebuffers);
+typedef GLenum (APIENTRYP PFNGLCHECKFRAMEBUFFERSTATUSEXTPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE1DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERRENDERBUFFEREXTPROC) (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+typedef void (APIENTRYP PFNGLGETFRAMEBUFFERATTACHMENTPARAMETERIVEXTPROC) (GLenum target, GLenum attachment, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGENERATEMIPMAPEXTPROC) (GLenum target);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLboolean APIENTRY glIsRenderbufferEXT (GLuint renderbuffer);
+GLAPI void APIENTRY glBindRenderbufferEXT (GLenum target, GLuint renderbuffer);
+GLAPI void APIENTRY glDeleteRenderbuffersEXT (GLsizei n, const GLuint *renderbuffers);
+GLAPI void APIENTRY glGenRenderbuffersEXT (GLsizei n, GLuint *renderbuffers);
+GLAPI void APIENTRY glRenderbufferStorageEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
+GLAPI void APIENTRY glGetRenderbufferParameterivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI GLboolean APIENTRY glIsFramebufferEXT (GLuint framebuffer);
+GLAPI void APIENTRY glBindFramebufferEXT (GLenum target, GLuint framebuffer);
+GLAPI void APIENTRY glDeleteFramebuffersEXT (GLsizei n, const GLuint *framebuffers);
+GLAPI void APIENTRY glGenFramebuffersEXT (GLsizei n, GLuint *framebuffers);
+GLAPI GLenum APIENTRY glCheckFramebufferStatusEXT (GLenum target);
+GLAPI void APIENTRY glFramebufferTexture1DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GLAPI void APIENTRY glFramebufferTexture2DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+GLAPI void APIENTRY glFramebufferTexture3DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
+GLAPI void APIENTRY glFramebufferRenderbufferEXT (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+GLAPI void APIENTRY glGetFramebufferAttachmentParameterivEXT (GLenum target, GLenum attachment, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGenerateMipmapEXT (GLenum target);
 #endif
+#endif /* GL_EXT_framebuffer_object */
 
-#ifndef GL_GREMEDY_string_marker
-#endif
-
-#ifndef GL_EXT_packed_depth_stencil
-#define GL_DEPTH_STENCIL_EXT              0x84F9
-#define GL_UNSIGNED_INT_24_8_EXT          0x84FA
-#define GL_DEPTH24_STENCIL8_EXT           0x88F0
-#define GL_TEXTURE_STENCIL_SIZE_EXT       0x88F1
-#endif
-
-#ifndef GL_EXT_stencil_clear_tag
-#define GL_STENCIL_TAG_BITS_EXT           0x88F2
-#define GL_STENCIL_CLEAR_TAG_VALUE_EXT    0x88F3
-#endif
-
-#ifndef GL_EXT_texture_sRGB
-#define GL_SRGB_EXT                       0x8C40
-#define GL_SRGB8_EXT                      0x8C41
-#define GL_SRGB_ALPHA_EXT                 0x8C42
-#define GL_SRGB8_ALPHA8_EXT               0x8C43
-#define GL_SLUMINANCE_ALPHA_EXT           0x8C44
-#define GL_SLUMINANCE8_ALPHA8_EXT         0x8C45
-#define GL_SLUMINANCE_EXT                 0x8C46
-#define GL_SLUMINANCE8_EXT                0x8C47
-#define GL_COMPRESSED_SRGB_EXT            0x8C48
-#define GL_COMPRESSED_SRGB_ALPHA_EXT      0x8C49
-#define GL_COMPRESSED_SLUMINANCE_EXT      0x8C4A
-#define GL_COMPRESSED_SLUMINANCE_ALPHA_EXT 0x8C4B
-#define GL_COMPRESSED_SRGB_S3TC_DXT1_EXT  0x8C4C
-#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT1_EXT 0x8C4D
-#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT3_EXT 0x8C4E
-#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT5_EXT 0x8C4F
-#endif
-
-#ifndef GL_EXT_framebuffer_blit
-#define GL_READ_FRAMEBUFFER_EXT           0x8CA8
-#define GL_DRAW_FRAMEBUFFER_EXT           0x8CA9
-#define GL_DRAW_FRAMEBUFFER_BINDING_EXT   GL_FRAMEBUFFER_BINDING_EXT
-#define GL_READ_FRAMEBUFFER_BINDING_EXT   0x8CAA
-#endif
-
-#ifndef GL_EXT_framebuffer_multisample
-#define GL_RENDERBUFFER_SAMPLES_EXT       0x8CAB
-#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT 0x8D56
-#define GL_MAX_SAMPLES_EXT                0x8D57
-#endif
-
-#ifndef GL_MESAX_texture_stack
-#define GL_TEXTURE_1D_STACK_MESAX         0x8759
-#define GL_TEXTURE_2D_STACK_MESAX         0x875A
-#define GL_PROXY_TEXTURE_1D_STACK_MESAX   0x875B
-#define GL_PROXY_TEXTURE_2D_STACK_MESAX   0x875C
-#define GL_TEXTURE_1D_STACK_BINDING_MESAX 0x875D
-#define GL_TEXTURE_2D_STACK_BINDING_MESAX 0x875E
-#endif
-
-#ifndef GL_EXT_timer_query
-#define GL_TIME_ELAPSED_EXT               0x88BF
-#endif
-
-#ifndef GL_EXT_gpu_program_parameters
-#endif
-
-#ifndef GL_APPLE_flush_buffer_range
-#define GL_BUFFER_SERIALIZED_MODIFY_APPLE 0x8A12
-#define GL_BUFFER_FLUSHING_UNMAP_APPLE    0x8A13
-#endif
-
-#ifndef GL_NV_gpu_program4
-#define GL_MIN_PROGRAM_TEXEL_OFFSET_NV    0x8904
-#define GL_MAX_PROGRAM_TEXEL_OFFSET_NV    0x8905
-#define GL_PROGRAM_ATTRIB_COMPONENTS_NV   0x8906
-#define GL_PROGRAM_RESULT_COMPONENTS_NV   0x8907
-#define GL_MAX_PROGRAM_ATTRIB_COMPONENTS_NV 0x8908
-#define GL_MAX_PROGRAM_RESULT_COMPONENTS_NV 0x8909
-#define GL_MAX_PROGRAM_GENERIC_ATTRIBS_NV 0x8DA5
-#define GL_MAX_PROGRAM_GENERIC_RESULTS_NV 0x8DA6
-#endif
+#ifndef GL_EXT_framebuffer_sRGB
+#define GL_EXT_framebuffer_sRGB 1
+#define GL_FRAMEBUFFER_SRGB_EXT           0x8DB9
+#define GL_FRAMEBUFFER_SRGB_CAPABLE_EXT   0x8DBA
+#endif /* GL_EXT_framebuffer_sRGB */
 
-#ifndef GL_NV_geometry_program4
-#define GL_LINES_ADJACENCY_EXT            0x000A
-#define GL_LINE_STRIP_ADJACENCY_EXT       0x000B
-#define GL_TRIANGLES_ADJACENCY_EXT        0x000C
-#define GL_TRIANGLE_STRIP_ADJACENCY_EXT   0x000D
-#define GL_GEOMETRY_PROGRAM_NV            0x8C26
-#define GL_MAX_PROGRAM_OUTPUT_VERTICES_NV 0x8C27
-#define GL_MAX_PROGRAM_TOTAL_OUTPUT_COMPONENTS_NV 0x8C28
+#ifndef GL_EXT_geometry_shader4
+#define GL_EXT_geometry_shader4 1
+#define GL_GEOMETRY_SHADER_EXT            0x8DD9
 #define GL_GEOMETRY_VERTICES_OUT_EXT      0x8DDA
 #define GL_GEOMETRY_INPUT_TYPE_EXT        0x8DDB
 #define GL_GEOMETRY_OUTPUT_TYPE_EXT       0x8DDC
 #define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_EXT 0x8C29
-#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_EXT 0x8DA7
-#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_EXT 0x8DA8
-#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_EXT 0x8DA9
-#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT 0x8CD4
-#define GL_PROGRAM_POINT_SIZE_EXT         0x8642
-#endif
-
-#ifndef GL_EXT_geometry_shader4
-#define GL_GEOMETRY_SHADER_EXT            0x8DD9
-/* reuse GL_GEOMETRY_VERTICES_OUT_EXT */
-/* reuse GL_GEOMETRY_INPUT_TYPE_EXT */
-/* reuse GL_GEOMETRY_OUTPUT_TYPE_EXT */
-/* reuse GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_EXT */
 #define GL_MAX_GEOMETRY_VARYING_COMPONENTS_EXT 0x8DDD
 #define GL_MAX_VERTEX_VARYING_COMPONENTS_EXT 0x8DDE
 #define GL_MAX_VARYING_COMPONENTS_EXT     0x8B4B
 #define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS_EXT 0x8DDF
 #define GL_MAX_GEOMETRY_OUTPUT_VERTICES_EXT 0x8DE0
 #define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS_EXT 0x8DE1
-/* reuse GL_LINES_ADJACENCY_EXT */
-/* reuse GL_LINE_STRIP_ADJACENCY_EXT */
-/* reuse GL_TRIANGLES_ADJACENCY_EXT */
-/* reuse GL_TRIANGLE_STRIP_ADJACENCY_EXT */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_EXT */
-/* reuse GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_EXT */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_LAYERED_EXT */
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT */
-/* reuse GL_PROGRAM_POINT_SIZE_EXT */
+#define GL_LINES_ADJACENCY_EXT            0x000A
+#define GL_LINE_STRIP_ADJACENCY_EXT       0x000B
+#define GL_TRIANGLES_ADJACENCY_EXT        0x000C
+#define GL_TRIANGLE_STRIP_ADJACENCY_EXT   0x000D
+#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_EXT 0x8DA8
+#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_EXT 0x8DA9
+#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_EXT 0x8DA7
+#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT 0x8CD4
+#define GL_PROGRAM_POINT_SIZE_EXT         0x8642
+typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIEXTPROC) (GLuint program, GLenum pname, GLint value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramParameteriEXT (GLuint program, GLenum pname, GLint value);
 #endif
+#endif /* GL_EXT_geometry_shader4 */
 
-#ifndef GL_NV_vertex_program4
-#define GL_VERTEX_ATTRIB_ARRAY_INTEGER_NV 0x88FD
+#ifndef GL_EXT_gpu_program_parameters
+#define GL_EXT_gpu_program_parameters 1
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERS4FVEXTPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERS4FVEXTPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramEnvParameters4fvEXT (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
+GLAPI void APIENTRY glProgramLocalParameters4fvEXT (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
 #endif
+#endif /* GL_EXT_gpu_program_parameters */
 
 #ifndef GL_EXT_gpu_shader4
+#define GL_EXT_gpu_shader4 1
+#define GL_VERTEX_ATTRIB_ARRAY_INTEGER_EXT 0x88FD
 #define GL_SAMPLER_1D_ARRAY_EXT           0x8DC0
 #define GL_SAMPLER_2D_ARRAY_EXT           0x8DC1
 #define GL_SAMPLER_BUFFER_EXT             0x8DC2
@@ -5304,18 +7214,553 @@ extern "C" {
 #define GL_UNSIGNED_INT_SAMPLER_1D_ARRAY_EXT 0x8DD6
 #define GL_UNSIGNED_INT_SAMPLER_2D_ARRAY_EXT 0x8DD7
 #define GL_UNSIGNED_INT_SAMPLER_BUFFER_EXT 0x8DD8
+#define GL_MIN_PROGRAM_TEXEL_OFFSET_EXT   0x8904
+#define GL_MAX_PROGRAM_TEXEL_OFFSET_EXT   0x8905
+typedef void (APIENTRYP PFNGLGETUNIFORMUIVEXTPROC) (GLuint program, GLint location, GLuint *params);
+typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONEXTPROC) (GLuint program, GLuint color, const GLchar *name);
+typedef GLint (APIENTRYP PFNGLGETFRAGDATALOCATIONEXTPROC) (GLuint program, const GLchar *name);
+typedef void (APIENTRYP PFNGLUNIFORM1UIEXTPROC) (GLint location, GLuint v0);
+typedef void (APIENTRYP PFNGLUNIFORM2UIEXTPROC) (GLint location, GLuint v0, GLuint v1);
+typedef void (APIENTRYP PFNGLUNIFORM3UIEXTPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2);
+typedef void (APIENTRYP PFNGLUNIFORM4UIEXTPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+typedef void (APIENTRYP PFNGLUNIFORM1UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLUNIFORM2UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLUNIFORM3UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
+typedef void (APIENTRYP PFNGLUNIFORM4UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGetUniformuivEXT (GLuint program, GLint location, GLuint *params);
+GLAPI void APIENTRY glBindFragDataLocationEXT (GLuint program, GLuint color, const GLchar *name);
+GLAPI GLint APIENTRY glGetFragDataLocationEXT (GLuint program, const GLchar *name);
+GLAPI void APIENTRY glUniform1uiEXT (GLint location, GLuint v0);
+GLAPI void APIENTRY glUniform2uiEXT (GLint location, GLuint v0, GLuint v1);
+GLAPI void APIENTRY glUniform3uiEXT (GLint location, GLuint v0, GLuint v1, GLuint v2);
+GLAPI void APIENTRY glUniform4uiEXT (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
+GLAPI void APIENTRY glUniform1uivEXT (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glUniform2uivEXT (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glUniform3uivEXT (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glUniform4uivEXT (GLint location, GLsizei count, const GLuint *value);
 #endif
+#endif /* GL_EXT_gpu_shader4 */
 
-#ifndef GL_EXT_draw_instanced
+#ifndef GL_EXT_histogram
+#define GL_EXT_histogram 1
+#define GL_HISTOGRAM_EXT                  0x8024
+#define GL_PROXY_HISTOGRAM_EXT            0x8025
+#define GL_HISTOGRAM_WIDTH_EXT            0x8026
+#define GL_HISTOGRAM_FORMAT_EXT           0x8027
+#define GL_HISTOGRAM_RED_SIZE_EXT         0x8028
+#define GL_HISTOGRAM_GREEN_SIZE_EXT       0x8029
+#define GL_HISTOGRAM_BLUE_SIZE_EXT        0x802A
+#define GL_HISTOGRAM_ALPHA_SIZE_EXT       0x802B
+#define GL_HISTOGRAM_LUMINANCE_SIZE_EXT   0x802C
+#define GL_HISTOGRAM_SINK_EXT             0x802D
+#define GL_MINMAX_EXT                     0x802E
+#define GL_MINMAX_FORMAT_EXT              0x802F
+#define GL_MINMAX_SINK_EXT                0x8030
+#define GL_TABLE_TOO_LARGE_EXT            0x8031
+typedef void (APIENTRYP PFNGLGETHISTOGRAMEXTPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMINMAXEXTPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLHISTOGRAMEXTPROC) (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
+typedef void (APIENTRYP PFNGLMINMAXEXTPROC) (GLenum target, GLenum internalformat, GLboolean sink);
+typedef void (APIENTRYP PFNGLRESETHISTOGRAMEXTPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLRESETMINMAXEXTPROC) (GLenum target);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGetHistogramEXT (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+GLAPI void APIENTRY glGetHistogramParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetHistogramParameterivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMinmaxEXT (GLenum target, GLboolean reset, GLenum format, GLenum type, void *values);
+GLAPI void APIENTRY glGetMinmaxParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMinmaxParameterivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glHistogramEXT (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
+GLAPI void APIENTRY glMinmaxEXT (GLenum target, GLenum internalformat, GLboolean sink);
+GLAPI void APIENTRY glResetHistogramEXT (GLenum target);
+GLAPI void APIENTRY glResetMinmaxEXT (GLenum target);
 #endif
+#endif /* GL_EXT_histogram */
+
+#ifndef GL_EXT_index_array_formats
+#define GL_EXT_index_array_formats 1
+#define GL_IUI_V2F_EXT                    0x81AD
+#define GL_IUI_V3F_EXT                    0x81AE
+#define GL_IUI_N3F_V2F_EXT                0x81AF
+#define GL_IUI_N3F_V3F_EXT                0x81B0
+#define GL_T2F_IUI_V2F_EXT                0x81B1
+#define GL_T2F_IUI_V3F_EXT                0x81B2
+#define GL_T2F_IUI_N3F_V2F_EXT            0x81B3
+#define GL_T2F_IUI_N3F_V3F_EXT            0x81B4
+#endif /* GL_EXT_index_array_formats */
+
+#ifndef GL_EXT_index_func
+#define GL_EXT_index_func 1
+#define GL_INDEX_TEST_EXT                 0x81B5
+#define GL_INDEX_TEST_FUNC_EXT            0x81B6
+#define GL_INDEX_TEST_REF_EXT             0x81B7
+typedef void (APIENTRYP PFNGLINDEXFUNCEXTPROC) (GLenum func, GLclampf ref);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glIndexFuncEXT (GLenum func, GLclampf ref);
+#endif
+#endif /* GL_EXT_index_func */
+
+#ifndef GL_EXT_index_material
+#define GL_EXT_index_material 1
+#define GL_INDEX_MATERIAL_EXT             0x81B8
+#define GL_INDEX_MATERIAL_PARAMETER_EXT   0x81B9
+#define GL_INDEX_MATERIAL_FACE_EXT        0x81BA
+typedef void (APIENTRYP PFNGLINDEXMATERIALEXTPROC) (GLenum face, GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glIndexMaterialEXT (GLenum face, GLenum mode);
+#endif
+#endif /* GL_EXT_index_material */
+
+#ifndef GL_EXT_index_texture
+#define GL_EXT_index_texture 1
+#endif /* GL_EXT_index_texture */
+
+#ifndef GL_EXT_light_texture
+#define GL_EXT_light_texture 1
+#define GL_FRAGMENT_MATERIAL_EXT          0x8349
+#define GL_FRAGMENT_NORMAL_EXT            0x834A
+#define GL_FRAGMENT_COLOR_EXT             0x834C
+#define GL_ATTENUATION_EXT                0x834D
+#define GL_SHADOW_ATTENUATION_EXT         0x834E
+#define GL_TEXTURE_APPLICATION_MODE_EXT   0x834F
+#define GL_TEXTURE_LIGHT_EXT              0x8350
+#define GL_TEXTURE_MATERIAL_FACE_EXT      0x8351
+#define GL_TEXTURE_MATERIAL_PARAMETER_EXT 0x8352
+typedef void (APIENTRYP PFNGLAPPLYTEXTUREEXTPROC) (GLenum mode);
+typedef void (APIENTRYP PFNGLTEXTURELIGHTEXTPROC) (GLenum pname);
+typedef void (APIENTRYP PFNGLTEXTUREMATERIALEXTPROC) (GLenum face, GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glApplyTextureEXT (GLenum mode);
+GLAPI void APIENTRY glTextureLightEXT (GLenum pname);
+GLAPI void APIENTRY glTextureMaterialEXT (GLenum face, GLenum mode);
+#endif
+#endif /* GL_EXT_light_texture */
+
+#ifndef GL_EXT_misc_attribute
+#define GL_EXT_misc_attribute 1
+#endif /* GL_EXT_misc_attribute */
+
+#ifndef GL_EXT_multi_draw_arrays
+#define GL_EXT_multi_draw_arrays 1
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSEXTPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSEXTPROC) (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei primcount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiDrawArraysEXT (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
+GLAPI void APIENTRY glMultiDrawElementsEXT (GLenum mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei primcount);
+#endif
+#endif /* GL_EXT_multi_draw_arrays */
+
+#ifndef GL_EXT_multisample
+#define GL_EXT_multisample 1
+#define GL_MULTISAMPLE_EXT                0x809D
+#define GL_SAMPLE_ALPHA_TO_MASK_EXT       0x809E
+#define GL_SAMPLE_ALPHA_TO_ONE_EXT        0x809F
+#define GL_SAMPLE_MASK_EXT                0x80A0
+#define GL_1PASS_EXT                      0x80A1
+#define GL_2PASS_0_EXT                    0x80A2
+#define GL_2PASS_1_EXT                    0x80A3
+#define GL_4PASS_0_EXT                    0x80A4
+#define GL_4PASS_1_EXT                    0x80A5
+#define GL_4PASS_2_EXT                    0x80A6
+#define GL_4PASS_3_EXT                    0x80A7
+#define GL_SAMPLE_BUFFERS_EXT             0x80A8
+#define GL_SAMPLES_EXT                    0x80A9
+#define GL_SAMPLE_MASK_VALUE_EXT          0x80AA
+#define GL_SAMPLE_MASK_INVERT_EXT         0x80AB
+#define GL_SAMPLE_PATTERN_EXT             0x80AC
+#define GL_MULTISAMPLE_BIT_EXT            0x20000000
+typedef void (APIENTRYP PFNGLSAMPLEMASKEXTPROC) (GLclampf value, GLboolean invert);
+typedef void (APIENTRYP PFNGLSAMPLEPATTERNEXTPROC) (GLenum pattern);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glSampleMaskEXT (GLclampf value, GLboolean invert);
+GLAPI void APIENTRY glSamplePatternEXT (GLenum pattern);
+#endif
+#endif /* GL_EXT_multisample */
+
+#ifndef GL_EXT_packed_depth_stencil
+#define GL_EXT_packed_depth_stencil 1
+#define GL_DEPTH_STENCIL_EXT              0x84F9
+#define GL_UNSIGNED_INT_24_8_EXT          0x84FA
+#define GL_DEPTH24_STENCIL8_EXT           0x88F0
+#define GL_TEXTURE_STENCIL_SIZE_EXT       0x88F1
+#endif /* GL_EXT_packed_depth_stencil */
 
 #ifndef GL_EXT_packed_float
+#define GL_EXT_packed_float 1
 #define GL_R11F_G11F_B10F_EXT             0x8C3A
 #define GL_UNSIGNED_INT_10F_11F_11F_REV_EXT 0x8C3B
 #define GL_RGBA_SIGNED_COMPONENTS_EXT     0x8C3C
+#endif /* GL_EXT_packed_float */
+
+#ifndef GL_EXT_packed_pixels
+#define GL_EXT_packed_pixels 1
+#define GL_UNSIGNED_BYTE_3_3_2_EXT        0x8032
+#define GL_UNSIGNED_SHORT_4_4_4_4_EXT     0x8033
+#define GL_UNSIGNED_SHORT_5_5_5_1_EXT     0x8034
+#define GL_UNSIGNED_INT_8_8_8_8_EXT       0x8035
+#define GL_UNSIGNED_INT_10_10_10_2_EXT    0x8036
+#endif /* GL_EXT_packed_pixels */
+
+#ifndef GL_EXT_paletted_texture
+#define GL_EXT_paletted_texture 1
+#define GL_COLOR_INDEX1_EXT               0x80E2
+#define GL_COLOR_INDEX2_EXT               0x80E3
+#define GL_COLOR_INDEX4_EXT               0x80E4
+#define GL_COLOR_INDEX8_EXT               0x80E5
+#define GL_COLOR_INDEX12_EXT              0x80E6
+#define GL_COLOR_INDEX16_EXT              0x80E7
+#define GL_TEXTURE_INDEX_SIZE_EXT         0x80ED
+typedef void (APIENTRYP PFNGLCOLORTABLEEXTPROC) (GLenum target, GLenum internalFormat, GLsizei width, GLenum format, GLenum type, const void *table);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEEXTPROC) (GLenum target, GLenum format, GLenum type, void *data);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glColorTableEXT (GLenum target, GLenum internalFormat, GLsizei width, GLenum format, GLenum type, const void *table);
+GLAPI void APIENTRY glGetColorTableEXT (GLenum target, GLenum format, GLenum type, void *data);
+GLAPI void APIENTRY glGetColorTableParameterivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetColorTableParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
+#endif
+#endif /* GL_EXT_paletted_texture */
+
+#ifndef GL_EXT_pixel_buffer_object
+#define GL_EXT_pixel_buffer_object 1
+#define GL_PIXEL_PACK_BUFFER_EXT          0x88EB
+#define GL_PIXEL_UNPACK_BUFFER_EXT        0x88EC
+#define GL_PIXEL_PACK_BUFFER_BINDING_EXT  0x88ED
+#define GL_PIXEL_UNPACK_BUFFER_BINDING_EXT 0x88EF
+#endif /* GL_EXT_pixel_buffer_object */
+
+#ifndef GL_EXT_pixel_transform
+#define GL_EXT_pixel_transform 1
+#define GL_PIXEL_TRANSFORM_2D_EXT         0x8330
+#define GL_PIXEL_MAG_FILTER_EXT           0x8331
+#define GL_PIXEL_MIN_FILTER_EXT           0x8332
+#define GL_PIXEL_CUBIC_WEIGHT_EXT         0x8333
+#define GL_CUBIC_EXT                      0x8334
+#define GL_AVERAGE_EXT                    0x8335
+#define GL_PIXEL_TRANSFORM_2D_STACK_DEPTH_EXT 0x8336
+#define GL_MAX_PIXEL_TRANSFORM_2D_STACK_DEPTH_EXT 0x8337
+#define GL_PIXEL_TRANSFORM_2D_MATRIX_EXT  0x8338
+typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERIEXTPROC) (GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERFEXTPROC) (GLenum target, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETPIXELTRANSFORMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETPIXELTRANSFORMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glPixelTransformParameteriEXT (GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glPixelTransformParameterfEXT (GLenum target, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glPixelTransformParameterivEXT (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glPixelTransformParameterfvEXT (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glGetPixelTransformParameterivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetPixelTransformParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
+#endif
+#endif /* GL_EXT_pixel_transform */
+
+#ifndef GL_EXT_pixel_transform_color_table
+#define GL_EXT_pixel_transform_color_table 1
+#endif /* GL_EXT_pixel_transform_color_table */
+
+#ifndef GL_EXT_point_parameters
+#define GL_EXT_point_parameters 1
+#define GL_POINT_SIZE_MIN_EXT             0x8126
+#define GL_POINT_SIZE_MAX_EXT             0x8127
+#define GL_POINT_FADE_THRESHOLD_SIZE_EXT  0x8128
+#define GL_DISTANCE_ATTENUATION_EXT       0x8129
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFEXTPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFVEXTPROC) (GLenum pname, const GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glPointParameterfEXT (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glPointParameterfvEXT (GLenum pname, const GLfloat *params);
+#endif
+#endif /* GL_EXT_point_parameters */
+
+#ifndef GL_EXT_polygon_offset
+#define GL_EXT_polygon_offset 1
+#define GL_POLYGON_OFFSET_EXT             0x8037
+#define GL_POLYGON_OFFSET_FACTOR_EXT      0x8038
+#define GL_POLYGON_OFFSET_BIAS_EXT        0x8039
+typedef void (APIENTRYP PFNGLPOLYGONOFFSETEXTPROC) (GLfloat factor, GLfloat bias);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glPolygonOffsetEXT (GLfloat factor, GLfloat bias);
+#endif
+#endif /* GL_EXT_polygon_offset */
+
+#ifndef GL_EXT_provoking_vertex
+#define GL_EXT_provoking_vertex 1
+#define GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION_EXT 0x8E4C
+#define GL_FIRST_VERTEX_CONVENTION_EXT    0x8E4D
+#define GL_LAST_VERTEX_CONVENTION_EXT     0x8E4E
+#define GL_PROVOKING_VERTEX_EXT           0x8E4F
+typedef void (APIENTRYP PFNGLPROVOKINGVERTEXEXTPROC) (GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProvokingVertexEXT (GLenum mode);
+#endif
+#endif /* GL_EXT_provoking_vertex */
+
+#ifndef GL_EXT_rescale_normal
+#define GL_EXT_rescale_normal 1
+#define GL_RESCALE_NORMAL_EXT             0x803A
+#endif /* GL_EXT_rescale_normal */
+
+#ifndef GL_EXT_secondary_color
+#define GL_EXT_secondary_color 1
+#define GL_COLOR_SUM_EXT                  0x8458
+#define GL_CURRENT_SECONDARY_COLOR_EXT    0x8459
+#define GL_SECONDARY_COLOR_ARRAY_SIZE_EXT 0x845A
+#define GL_SECONDARY_COLOR_ARRAY_TYPE_EXT 0x845B
+#define GL_SECONDARY_COLOR_ARRAY_STRIDE_EXT 0x845C
+#define GL_SECONDARY_COLOR_ARRAY_POINTER_EXT 0x845D
+#define GL_SECONDARY_COLOR_ARRAY_EXT      0x845E
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BEXTPROC) (GLbyte red, GLbyte green, GLbyte blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BVEXTPROC) (const GLbyte *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DEXTPROC) (GLdouble red, GLdouble green, GLdouble blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DVEXTPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FEXTPROC) (GLfloat red, GLfloat green, GLfloat blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FVEXTPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IEXTPROC) (GLint red, GLint green, GLint blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IVEXTPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SEXTPROC) (GLshort red, GLshort green, GLshort blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SVEXTPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBEXTPROC) (GLubyte red, GLubyte green, GLubyte blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBVEXTPROC) (const GLubyte *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIEXTPROC) (GLuint red, GLuint green, GLuint blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIVEXTPROC) (const GLuint *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USEXTPROC) (GLushort red, GLushort green, GLushort blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USVEXTPROC) (const GLushort *v);
+typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glSecondaryColor3bEXT (GLbyte red, GLbyte green, GLbyte blue);
+GLAPI void APIENTRY glSecondaryColor3bvEXT (const GLbyte *v);
+GLAPI void APIENTRY glSecondaryColor3dEXT (GLdouble red, GLdouble green, GLdouble blue);
+GLAPI void APIENTRY glSecondaryColor3dvEXT (const GLdouble *v);
+GLAPI void APIENTRY glSecondaryColor3fEXT (GLfloat red, GLfloat green, GLfloat blue);
+GLAPI void APIENTRY glSecondaryColor3fvEXT (const GLfloat *v);
+GLAPI void APIENTRY glSecondaryColor3iEXT (GLint red, GLint green, GLint blue);
+GLAPI void APIENTRY glSecondaryColor3ivEXT (const GLint *v);
+GLAPI void APIENTRY glSecondaryColor3sEXT (GLshort red, GLshort green, GLshort blue);
+GLAPI void APIENTRY glSecondaryColor3svEXT (const GLshort *v);
+GLAPI void APIENTRY glSecondaryColor3ubEXT (GLubyte red, GLubyte green, GLubyte blue);
+GLAPI void APIENTRY glSecondaryColor3ubvEXT (const GLubyte *v);
+GLAPI void APIENTRY glSecondaryColor3uiEXT (GLuint red, GLuint green, GLuint blue);
+GLAPI void APIENTRY glSecondaryColor3uivEXT (const GLuint *v);
+GLAPI void APIENTRY glSecondaryColor3usEXT (GLushort red, GLushort green, GLushort blue);
+GLAPI void APIENTRY glSecondaryColor3usvEXT (const GLushort *v);
+GLAPI void APIENTRY glSecondaryColorPointerEXT (GLint size, GLenum type, GLsizei stride, const void *pointer);
 #endif
+#endif /* GL_EXT_secondary_color */
+
+#ifndef GL_EXT_separate_shader_objects
+#define GL_EXT_separate_shader_objects 1
+#define GL_ACTIVE_PROGRAM_EXT             0x8B8D
+typedef void (APIENTRYP PFNGLUSESHADERPROGRAMEXTPROC) (GLenum type, GLuint program);
+typedef void (APIENTRYP PFNGLACTIVEPROGRAMEXTPROC) (GLuint program);
+typedef GLuint (APIENTRYP PFNGLCREATESHADERPROGRAMEXTPROC) (GLenum type, const GLchar *string);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glUseShaderProgramEXT (GLenum type, GLuint program);
+GLAPI void APIENTRY glActiveProgramEXT (GLuint program);
+GLAPI GLuint APIENTRY glCreateShaderProgramEXT (GLenum type, const GLchar *string);
+#endif
+#endif /* GL_EXT_separate_shader_objects */
+
+#ifndef GL_EXT_separate_specular_color
+#define GL_EXT_separate_specular_color 1
+#define GL_LIGHT_MODEL_COLOR_CONTROL_EXT  0x81F8
+#define GL_SINGLE_COLOR_EXT               0x81F9
+#define GL_SEPARATE_SPECULAR_COLOR_EXT    0x81FA
+#endif /* GL_EXT_separate_specular_color */
+
+#ifndef GL_EXT_shader_image_load_formatted
+#define GL_EXT_shader_image_load_formatted 1
+#endif /* GL_EXT_shader_image_load_formatted */
+
+#ifndef GL_EXT_shader_image_load_store
+#define GL_EXT_shader_image_load_store 1
+#define GL_MAX_IMAGE_UNITS_EXT            0x8F38
+#define GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS_EXT 0x8F39
+#define GL_IMAGE_BINDING_NAME_EXT         0x8F3A
+#define GL_IMAGE_BINDING_LEVEL_EXT        0x8F3B
+#define GL_IMAGE_BINDING_LAYERED_EXT      0x8F3C
+#define GL_IMAGE_BINDING_LAYER_EXT        0x8F3D
+#define GL_IMAGE_BINDING_ACCESS_EXT       0x8F3E
+#define GL_IMAGE_1D_EXT                   0x904C
+#define GL_IMAGE_2D_EXT                   0x904D
+#define GL_IMAGE_3D_EXT                   0x904E
+#define GL_IMAGE_2D_RECT_EXT              0x904F
+#define GL_IMAGE_CUBE_EXT                 0x9050
+#define GL_IMAGE_BUFFER_EXT               0x9051
+#define GL_IMAGE_1D_ARRAY_EXT             0x9052
+#define GL_IMAGE_2D_ARRAY_EXT             0x9053
+#define GL_IMAGE_CUBE_MAP_ARRAY_EXT       0x9054
+#define GL_IMAGE_2D_MULTISAMPLE_EXT       0x9055
+#define GL_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x9056
+#define GL_INT_IMAGE_1D_EXT               0x9057
+#define GL_INT_IMAGE_2D_EXT               0x9058
+#define GL_INT_IMAGE_3D_EXT               0x9059
+#define GL_INT_IMAGE_2D_RECT_EXT          0x905A
+#define GL_INT_IMAGE_CUBE_EXT             0x905B
+#define GL_INT_IMAGE_BUFFER_EXT           0x905C
+#define GL_INT_IMAGE_1D_ARRAY_EXT         0x905D
+#define GL_INT_IMAGE_2D_ARRAY_EXT         0x905E
+#define GL_INT_IMAGE_CUBE_MAP_ARRAY_EXT   0x905F
+#define GL_INT_IMAGE_2D_MULTISAMPLE_EXT   0x9060
+#define GL_INT_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x9061
+#define GL_UNSIGNED_INT_IMAGE_1D_EXT      0x9062
+#define GL_UNSIGNED_INT_IMAGE_2D_EXT      0x9063
+#define GL_UNSIGNED_INT_IMAGE_3D_EXT      0x9064
+#define GL_UNSIGNED_INT_IMAGE_2D_RECT_EXT 0x9065
+#define GL_UNSIGNED_INT_IMAGE_CUBE_EXT    0x9066
+#define GL_UNSIGNED_INT_IMAGE_BUFFER_EXT  0x9067
+#define GL_UNSIGNED_INT_IMAGE_1D_ARRAY_EXT 0x9068
+#define GL_UNSIGNED_INT_IMAGE_2D_ARRAY_EXT 0x9069
+#define GL_UNSIGNED_INT_IMAGE_CUBE_MAP_ARRAY_EXT 0x906A
+#define GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_EXT 0x906B
+#define GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x906C
+#define GL_MAX_IMAGE_SAMPLES_EXT          0x906D
+#define GL_IMAGE_BINDING_FORMAT_EXT       0x906E
+#define GL_VERTEX_ATTRIB_ARRAY_BARRIER_BIT_EXT 0x00000001
+#define GL_ELEMENT_ARRAY_BARRIER_BIT_EXT  0x00000002
+#define GL_UNIFORM_BARRIER_BIT_EXT        0x00000004
+#define GL_TEXTURE_FETCH_BARRIER_BIT_EXT  0x00000008
+#define GL_SHADER_IMAGE_ACCESS_BARRIER_BIT_EXT 0x00000020
+#define GL_COMMAND_BARRIER_BIT_EXT        0x00000040
+#define GL_PIXEL_BUFFER_BARRIER_BIT_EXT   0x00000080
+#define GL_TEXTURE_UPDATE_BARRIER_BIT_EXT 0x00000100
+#define GL_BUFFER_UPDATE_BARRIER_BIT_EXT  0x00000200
+#define GL_FRAMEBUFFER_BARRIER_BIT_EXT    0x00000400
+#define GL_TRANSFORM_FEEDBACK_BARRIER_BIT_EXT 0x00000800
+#define GL_ATOMIC_COUNTER_BARRIER_BIT_EXT 0x00001000
+#define GL_ALL_BARRIER_BITS_EXT           0xFFFFFFFF
+typedef void (APIENTRYP PFNGLBINDIMAGETEXTUREEXTPROC) (GLuint index, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLint format);
+typedef void (APIENTRYP PFNGLMEMORYBARRIEREXTPROC) (GLbitfield barriers);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBindImageTextureEXT (GLuint index, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLint format);
+GLAPI void APIENTRY glMemoryBarrierEXT (GLbitfield barriers);
+#endif
+#endif /* GL_EXT_shader_image_load_store */
+
+#ifndef GL_EXT_shader_integer_mix
+#define GL_EXT_shader_integer_mix 1
+#endif /* GL_EXT_shader_integer_mix */
+
+#ifndef GL_EXT_shadow_funcs
+#define GL_EXT_shadow_funcs 1
+#endif /* GL_EXT_shadow_funcs */
+
+#ifndef GL_EXT_shared_texture_palette
+#define GL_EXT_shared_texture_palette 1
+#define GL_SHARED_TEXTURE_PALETTE_EXT     0x81FB
+#endif /* GL_EXT_shared_texture_palette */
+
+#ifndef GL_EXT_stencil_clear_tag
+#define GL_EXT_stencil_clear_tag 1
+#define GL_STENCIL_TAG_BITS_EXT           0x88F2
+#define GL_STENCIL_CLEAR_TAG_VALUE_EXT    0x88F3
+typedef void (APIENTRYP PFNGLSTENCILCLEARTAGEXTPROC) (GLsizei stencilTagBits, GLuint stencilClearTag);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glStencilClearTagEXT (GLsizei stencilTagBits, GLuint stencilClearTag);
+#endif
+#endif /* GL_EXT_stencil_clear_tag */
+
+#ifndef GL_EXT_stencil_two_side
+#define GL_EXT_stencil_two_side 1
+#define GL_STENCIL_TEST_TWO_SIDE_EXT      0x8910
+#define GL_ACTIVE_STENCIL_FACE_EXT        0x8911
+typedef void (APIENTRYP PFNGLACTIVESTENCILFACEEXTPROC) (GLenum face);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glActiveStencilFaceEXT (GLenum face);
+#endif
+#endif /* GL_EXT_stencil_two_side */
+
+#ifndef GL_EXT_stencil_wrap
+#define GL_EXT_stencil_wrap 1
+#define GL_INCR_WRAP_EXT                  0x8507
+#define GL_DECR_WRAP_EXT                  0x8508
+#endif /* GL_EXT_stencil_wrap */
+
+#ifndef GL_EXT_subtexture
+#define GL_EXT_subtexture 1
+typedef void (APIENTRYP PFNGLTEXSUBIMAGE1DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXSUBIMAGE2DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexSubImage1DEXT (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTexSubImage2DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const void *pixels);
+#endif
+#endif /* GL_EXT_subtexture */
+
+#ifndef GL_EXT_texture
+#define GL_EXT_texture 1
+#define GL_ALPHA4_EXT                     0x803B
+#define GL_ALPHA8_EXT                     0x803C
+#define GL_ALPHA12_EXT                    0x803D
+#define GL_ALPHA16_EXT                    0x803E
+#define GL_LUMINANCE4_EXT                 0x803F
+#define GL_LUMINANCE8_EXT                 0x8040
+#define GL_LUMINANCE12_EXT                0x8041
+#define GL_LUMINANCE16_EXT                0x8042
+#define GL_LUMINANCE4_ALPHA4_EXT          0x8043
+#define GL_LUMINANCE6_ALPHA2_EXT          0x8044
+#define GL_LUMINANCE8_ALPHA8_EXT          0x8045
+#define GL_LUMINANCE12_ALPHA4_EXT         0x8046
+#define GL_LUMINANCE12_ALPHA12_EXT        0x8047
+#define GL_LUMINANCE16_ALPHA16_EXT        0x8048
+#define GL_INTENSITY_EXT                  0x8049
+#define GL_INTENSITY4_EXT                 0x804A
+#define GL_INTENSITY8_EXT                 0x804B
+#define GL_INTENSITY12_EXT                0x804C
+#define GL_INTENSITY16_EXT                0x804D
+#define GL_RGB2_EXT                       0x804E
+#define GL_RGB4_EXT                       0x804F
+#define GL_RGB5_EXT                       0x8050
+#define GL_RGB8_EXT                       0x8051
+#define GL_RGB10_EXT                      0x8052
+#define GL_RGB12_EXT                      0x8053
+#define GL_RGB16_EXT                      0x8054
+#define GL_RGBA2_EXT                      0x8055
+#define GL_RGBA4_EXT                      0x8056
+#define GL_RGB5_A1_EXT                    0x8057
+#define GL_RGBA8_EXT                      0x8058
+#define GL_RGB10_A2_EXT                   0x8059
+#define GL_RGBA12_EXT                     0x805A
+#define GL_RGBA16_EXT                     0x805B
+#define GL_TEXTURE_RED_SIZE_EXT           0x805C
+#define GL_TEXTURE_GREEN_SIZE_EXT         0x805D
+#define GL_TEXTURE_BLUE_SIZE_EXT          0x805E
+#define GL_TEXTURE_ALPHA_SIZE_EXT         0x805F
+#define GL_TEXTURE_LUMINANCE_SIZE_EXT     0x8060
+#define GL_TEXTURE_INTENSITY_SIZE_EXT     0x8061
+#define GL_REPLACE_EXT                    0x8062
+#define GL_PROXY_TEXTURE_1D_EXT           0x8063
+#define GL_PROXY_TEXTURE_2D_EXT           0x8064
+#define GL_TEXTURE_TOO_LARGE_EXT          0x8065
+#endif /* GL_EXT_texture */
+
+#ifndef GL_EXT_texture3D
+#define GL_EXT_texture3D 1
+#define GL_PACK_SKIP_IMAGES_EXT           0x806B
+#define GL_PACK_IMAGE_HEIGHT_EXT          0x806C
+#define GL_UNPACK_SKIP_IMAGES_EXT         0x806D
+#define GL_UNPACK_IMAGE_HEIGHT_EXT        0x806E
+#define GL_TEXTURE_3D_EXT                 0x806F
+#define GL_PROXY_TEXTURE_3D_EXT           0x8070
+#define GL_TEXTURE_DEPTH_EXT              0x8071
+#define GL_TEXTURE_WRAP_R_EXT             0x8072
+#define GL_MAX_3D_TEXTURE_SIZE_EXT        0x8073
+typedef void (APIENTRYP PFNGLTEXIMAGE3DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXSUBIMAGE3DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexImage3DEXT (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTexSubImage3DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const void *pixels);
+#endif
+#endif /* GL_EXT_texture3D */
 
 #ifndef GL_EXT_texture_array
+#define GL_EXT_texture_array 1
 #define GL_TEXTURE_1D_ARRAY_EXT           0x8C18
 #define GL_PROXY_TEXTURE_1D_ARRAY_EXT     0x8C19
 #define GL_TEXTURE_2D_ARRAY_EXT           0x8C1A
@@ -5324,117 +7769,108 @@ extern "C" {
 #define GL_TEXTURE_BINDING_2D_ARRAY_EXT   0x8C1D
 #define GL_MAX_ARRAY_TEXTURE_LAYERS_EXT   0x88FF
 #define GL_COMPARE_REF_DEPTH_TO_TEXTURE_EXT 0x884E
-/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT */
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYEREXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glFramebufferTextureLayerEXT (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
 #endif
+#endif /* GL_EXT_texture_array */
 
 #ifndef GL_EXT_texture_buffer_object
+#define GL_EXT_texture_buffer_object 1
 #define GL_TEXTURE_BUFFER_EXT             0x8C2A
 #define GL_MAX_TEXTURE_BUFFER_SIZE_EXT    0x8C2B
 #define GL_TEXTURE_BINDING_BUFFER_EXT     0x8C2C
 #define GL_TEXTURE_BUFFER_DATA_STORE_BINDING_EXT 0x8C2D
 #define GL_TEXTURE_BUFFER_FORMAT_EXT      0x8C2E
+typedef void (APIENTRYP PFNGLTEXBUFFEREXTPROC) (GLenum target, GLenum internalformat, GLuint buffer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexBufferEXT (GLenum target, GLenum internalformat, GLuint buffer);
 #endif
+#endif /* GL_EXT_texture_buffer_object */
 
 #ifndef GL_EXT_texture_compression_latc
+#define GL_EXT_texture_compression_latc 1
 #define GL_COMPRESSED_LUMINANCE_LATC1_EXT 0x8C70
 #define GL_COMPRESSED_SIGNED_LUMINANCE_LATC1_EXT 0x8C71
 #define GL_COMPRESSED_LUMINANCE_ALPHA_LATC2_EXT 0x8C72
 #define GL_COMPRESSED_SIGNED_LUMINANCE_ALPHA_LATC2_EXT 0x8C73
-#endif
+#endif /* GL_EXT_texture_compression_latc */
 
 #ifndef GL_EXT_texture_compression_rgtc
+#define GL_EXT_texture_compression_rgtc 1
 #define GL_COMPRESSED_RED_RGTC1_EXT       0x8DBB
 #define GL_COMPRESSED_SIGNED_RED_RGTC1_EXT 0x8DBC
 #define GL_COMPRESSED_RED_GREEN_RGTC2_EXT 0x8DBD
 #define GL_COMPRESSED_SIGNED_RED_GREEN_RGTC2_EXT 0x8DBE
-#endif
-
-#ifndef GL_EXT_texture_shared_exponent
-#define GL_RGB9_E5_EXT                    0x8C3D
-#define GL_UNSIGNED_INT_5_9_9_9_REV_EXT   0x8C3E
-#define GL_TEXTURE_SHARED_SIZE_EXT        0x8C3F
-#endif
-
-#ifndef GL_NV_depth_buffer_float
-#define GL_DEPTH_COMPONENT32F_NV          0x8DAB
-#define GL_DEPTH32F_STENCIL8_NV           0x8DAC
-#define GL_FLOAT_32_UNSIGNED_INT_24_8_REV_NV 0x8DAD
-#define GL_DEPTH_BUFFER_FLOAT_MODE_NV     0x8DAF
-#endif
+#endif /* GL_EXT_texture_compression_rgtc */
 
-#ifndef GL_NV_fragment_program4
-#endif
-
-#ifndef GL_NV_framebuffer_multisample_coverage
-#define GL_RENDERBUFFER_COVERAGE_SAMPLES_NV 0x8CAB
-#define GL_RENDERBUFFER_COLOR_SAMPLES_NV  0x8E10
-#define GL_MAX_MULTISAMPLE_COVERAGE_MODES_NV 0x8E11
-#define GL_MULTISAMPLE_COVERAGE_MODES_NV  0x8E12
-#endif
-
-#ifndef GL_EXT_framebuffer_sRGB
-#define GL_FRAMEBUFFER_SRGB_EXT           0x8DB9
-#define GL_FRAMEBUFFER_SRGB_CAPABLE_EXT   0x8DBA
-#endif
+#ifndef GL_EXT_texture_compression_s3tc
+#define GL_EXT_texture_compression_s3tc 1
+#define GL_COMPRESSED_RGB_S3TC_DXT1_EXT   0x83F0
+#define GL_COMPRESSED_RGBA_S3TC_DXT1_EXT  0x83F1
+#define GL_COMPRESSED_RGBA_S3TC_DXT3_EXT  0x83F2
+#define GL_COMPRESSED_RGBA_S3TC_DXT5_EXT  0x83F3
+#endif /* GL_EXT_texture_compression_s3tc */
 
-#ifndef GL_NV_geometry_shader4
-#endif
+#ifndef GL_EXT_texture_cube_map
+#define GL_EXT_texture_cube_map 1
+#define GL_NORMAL_MAP_EXT                 0x8511
+#define GL_REFLECTION_MAP_EXT             0x8512
+#define GL_TEXTURE_CUBE_MAP_EXT           0x8513
+#define GL_TEXTURE_BINDING_CUBE_MAP_EXT   0x8514
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_X_EXT 0x8515
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X_EXT 0x8516
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y_EXT 0x8517
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_EXT 0x8518
+#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z_EXT 0x8519
+#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_EXT 0x851A
+#define GL_PROXY_TEXTURE_CUBE_MAP_EXT     0x851B
+#define GL_MAX_CUBE_MAP_TEXTURE_SIZE_EXT  0x851C
+#endif /* GL_EXT_texture_cube_map */
 
-#ifndef GL_NV_parameter_buffer_object
-#define GL_MAX_PROGRAM_PARAMETER_BUFFER_BINDINGS_NV 0x8DA0
-#define GL_MAX_PROGRAM_PARAMETER_BUFFER_SIZE_NV 0x8DA1
-#define GL_VERTEX_PROGRAM_PARAMETER_BUFFER_NV 0x8DA2
-#define GL_GEOMETRY_PROGRAM_PARAMETER_BUFFER_NV 0x8DA3
-#define GL_FRAGMENT_PROGRAM_PARAMETER_BUFFER_NV 0x8DA4
-#endif
+#ifndef GL_EXT_texture_env_add
+#define GL_EXT_texture_env_add 1
+#endif /* GL_EXT_texture_env_add */
 
-#ifndef GL_EXT_draw_buffers2
-#endif
+#ifndef GL_EXT_texture_env_combine
+#define GL_EXT_texture_env_combine 1
+#define GL_COMBINE_EXT                    0x8570
+#define GL_COMBINE_RGB_EXT                0x8571
+#define GL_COMBINE_ALPHA_EXT              0x8572
+#define GL_RGB_SCALE_EXT                  0x8573
+#define GL_ADD_SIGNED_EXT                 0x8574
+#define GL_INTERPOLATE_EXT                0x8575
+#define GL_CONSTANT_EXT                   0x8576
+#define GL_PRIMARY_COLOR_EXT              0x8577
+#define GL_PREVIOUS_EXT                   0x8578
+#define GL_SOURCE0_RGB_EXT                0x8580
+#define GL_SOURCE1_RGB_EXT                0x8581
+#define GL_SOURCE2_RGB_EXT                0x8582
+#define GL_SOURCE0_ALPHA_EXT              0x8588
+#define GL_SOURCE1_ALPHA_EXT              0x8589
+#define GL_SOURCE2_ALPHA_EXT              0x858A
+#define GL_OPERAND0_RGB_EXT               0x8590
+#define GL_OPERAND1_RGB_EXT               0x8591
+#define GL_OPERAND2_RGB_EXT               0x8592
+#define GL_OPERAND0_ALPHA_EXT             0x8598
+#define GL_OPERAND1_ALPHA_EXT             0x8599
+#define GL_OPERAND2_ALPHA_EXT             0x859A
+#endif /* GL_EXT_texture_env_combine */
 
-#ifndef GL_NV_transform_feedback
-#define GL_BACK_PRIMARY_COLOR_NV          0x8C77
-#define GL_BACK_SECONDARY_COLOR_NV        0x8C78
-#define GL_TEXTURE_COORD_NV               0x8C79
-#define GL_CLIP_DISTANCE_NV               0x8C7A
-#define GL_VERTEX_ID_NV                   0x8C7B
-#define GL_PRIMITIVE_ID_NV                0x8C7C
-#define GL_GENERIC_ATTRIB_NV              0x8C7D
-#define GL_TRANSFORM_FEEDBACK_ATTRIBS_NV  0x8C7E
-#define GL_TRANSFORM_FEEDBACK_BUFFER_MODE_NV 0x8C7F
-#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS_NV 0x8C80
-#define GL_ACTIVE_VARYINGS_NV             0x8C81
-#define GL_ACTIVE_VARYING_MAX_LENGTH_NV   0x8C82
-#define GL_TRANSFORM_FEEDBACK_VARYINGS_NV 0x8C83
-#define GL_TRANSFORM_FEEDBACK_BUFFER_START_NV 0x8C84
-#define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE_NV 0x8C85
-#define GL_TRANSFORM_FEEDBACK_RECORD_NV   0x8C86
-#define GL_PRIMITIVES_GENERATED_NV        0x8C87
-#define GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN_NV 0x8C88
-#define GL_RASTERIZER_DISCARD_NV          0x8C89
-#define GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS_NV 0x8C8A
-#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS_NV 0x8C8B
-#define GL_INTERLEAVED_ATTRIBS_NV         0x8C8C
-#define GL_SEPARATE_ATTRIBS_NV            0x8C8D
-#define GL_TRANSFORM_FEEDBACK_BUFFER_NV   0x8C8E
-#define GL_TRANSFORM_FEEDBACK_BUFFER_BINDING_NV 0x8C8F
-#define GL_LAYER_NV                       0x8DAA
-#define GL_NEXT_BUFFER_NV                 -2
-#define GL_SKIP_COMPONENTS4_NV            -3
-#define GL_SKIP_COMPONENTS3_NV            -4
-#define GL_SKIP_COMPONENTS2_NV            -5
-#define GL_SKIP_COMPONENTS1_NV            -6
-#endif
+#ifndef GL_EXT_texture_env_dot3
+#define GL_EXT_texture_env_dot3 1
+#define GL_DOT3_RGB_EXT                   0x8740
+#define GL_DOT3_RGBA_EXT                  0x8741
+#endif /* GL_EXT_texture_env_dot3 */
 
-#ifndef GL_EXT_bindable_uniform
-#define GL_MAX_VERTEX_BINDABLE_UNIFORMS_EXT 0x8DE2
-#define GL_MAX_FRAGMENT_BINDABLE_UNIFORMS_EXT 0x8DE3
-#define GL_MAX_GEOMETRY_BINDABLE_UNIFORMS_EXT 0x8DE4
-#define GL_MAX_BINDABLE_UNIFORM_SIZE_EXT  0x8DED
-#define GL_UNIFORM_BUFFER_EXT             0x8DEE
-#define GL_UNIFORM_BUFFER_BINDING_EXT     0x8DEF
-#endif
+#ifndef GL_EXT_texture_filter_anisotropic
+#define GL_EXT_texture_filter_anisotropic 1
+#define GL_TEXTURE_MAX_ANISOTROPY_EXT     0x84FE
+#define GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT 0x84FF
+#endif /* GL_EXT_texture_filter_anisotropic */
 
 #ifndef GL_EXT_texture_integer
+#define GL_EXT_texture_integer 1
 #define GL_RGBA32UI_EXT                   0x8D70
 #define GL_RGB32UI_EXT                    0x8D71
 #define GL_ALPHA32UI_EXT                  0x8D72
@@ -5482,28 +7918,145 @@ extern "C" {
 #define GL_LUMINANCE_INTEGER_EXT          0x8D9C
 #define GL_LUMINANCE_ALPHA_INTEGER_EXT    0x8D9D
 #define GL_RGBA_INTEGER_MODE_EXT          0x8D9E
+typedef void (APIENTRYP PFNGLTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLCLEARCOLORIIEXTPROC) (GLint red, GLint green, GLint blue, GLint alpha);
+typedef void (APIENTRYP PFNGLCLEARCOLORIUIEXTPROC) (GLuint red, GLuint green, GLuint blue, GLuint alpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTexParameterIivEXT (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glTexParameterIuivEXT (GLenum target, GLenum pname, const GLuint *params);
+GLAPI void APIENTRY glGetTexParameterIivEXT (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetTexParameterIuivEXT (GLenum target, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glClearColorIiEXT (GLint red, GLint green, GLint blue, GLint alpha);
+GLAPI void APIENTRY glClearColorIuiEXT (GLuint red, GLuint green, GLuint blue, GLuint alpha);
 #endif
+#endif /* GL_EXT_texture_integer */
 
-#ifndef GL_GREMEDY_frame_terminator
+#ifndef GL_EXT_texture_lod_bias
+#define GL_EXT_texture_lod_bias 1
+#define GL_MAX_TEXTURE_LOD_BIAS_EXT       0x84FD
+#define GL_TEXTURE_FILTER_CONTROL_EXT     0x8500
+#define GL_TEXTURE_LOD_BIAS_EXT           0x8501
+#endif /* GL_EXT_texture_lod_bias */
+
+#ifndef GL_EXT_texture_mirror_clamp
+#define GL_EXT_texture_mirror_clamp 1
+#define GL_MIRROR_CLAMP_EXT               0x8742
+#define GL_MIRROR_CLAMP_TO_EDGE_EXT       0x8743
+#define GL_MIRROR_CLAMP_TO_BORDER_EXT     0x8912
+#endif /* GL_EXT_texture_mirror_clamp */
+
+#ifndef GL_EXT_texture_object
+#define GL_EXT_texture_object 1
+#define GL_TEXTURE_PRIORITY_EXT           0x8066
+#define GL_TEXTURE_RESIDENT_EXT           0x8067
+#define GL_TEXTURE_1D_BINDING_EXT         0x8068
+#define GL_TEXTURE_2D_BINDING_EXT         0x8069
+#define GL_TEXTURE_3D_BINDING_EXT         0x806A
+typedef GLboolean (APIENTRYP PFNGLARETEXTURESRESIDENTEXTPROC) (GLsizei n, const GLuint *textures, GLboolean *residences);
+typedef void (APIENTRYP PFNGLBINDTEXTUREEXTPROC) (GLenum target, GLuint texture);
+typedef void (APIENTRYP PFNGLDELETETEXTURESEXTPROC) (GLsizei n, const GLuint *textures);
+typedef void (APIENTRYP PFNGLGENTEXTURESEXTPROC) (GLsizei n, GLuint *textures);
+typedef GLboolean (APIENTRYP PFNGLISTEXTUREEXTPROC) (GLuint texture);
+typedef void (APIENTRYP PFNGLPRIORITIZETEXTURESEXTPROC) (GLsizei n, const GLuint *textures, const GLclampf *priorities);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLboolean APIENTRY glAreTexturesResidentEXT (GLsizei n, const GLuint *textures, GLboolean *residences);
+GLAPI void APIENTRY glBindTextureEXT (GLenum target, GLuint texture);
+GLAPI void APIENTRY glDeleteTexturesEXT (GLsizei n, const GLuint *textures);
+GLAPI void APIENTRY glGenTexturesEXT (GLsizei n, GLuint *textures);
+GLAPI GLboolean APIENTRY glIsTextureEXT (GLuint texture);
+GLAPI void APIENTRY glPrioritizeTexturesEXT (GLsizei n, const GLuint *textures, const GLclampf *priorities);
 #endif
+#endif /* GL_EXT_texture_object */
 
-#ifndef GL_NV_conditional_render
-#define GL_QUERY_WAIT_NV                  0x8E13
-#define GL_QUERY_NO_WAIT_NV               0x8E14
-#define GL_QUERY_BY_REGION_WAIT_NV        0x8E15
-#define GL_QUERY_BY_REGION_NO_WAIT_NV     0x8E16
+#ifndef GL_EXT_texture_perturb_normal
+#define GL_EXT_texture_perturb_normal 1
+#define GL_PERTURB_EXT                    0x85AE
+#define GL_TEXTURE_NORMAL_EXT             0x85AF
+typedef void (APIENTRYP PFNGLTEXTURENORMALEXTPROC) (GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTextureNormalEXT (GLenum mode);
 #endif
+#endif /* GL_EXT_texture_perturb_normal */
 
-#ifndef GL_NV_present_video
-#define GL_FRAME_NV                       0x8E26
-#define GL_FIELDS_NV                      0x8E27
-#define GL_CURRENT_TIME_NV                0x8E28
-#define GL_NUM_FILL_STREAMS_NV            0x8E29
-#define GL_PRESENT_TIME_NV                0x8E2A
-#define GL_PRESENT_DURATION_NV            0x8E2B
+#ifndef GL_EXT_texture_sRGB
+#define GL_EXT_texture_sRGB 1
+#define GL_SRGB_EXT                       0x8C40
+#define GL_SRGB8_EXT                      0x8C41
+#define GL_SRGB_ALPHA_EXT                 0x8C42
+#define GL_SRGB8_ALPHA8_EXT               0x8C43
+#define GL_SLUMINANCE_ALPHA_EXT           0x8C44
+#define GL_SLUMINANCE8_ALPHA8_EXT         0x8C45
+#define GL_SLUMINANCE_EXT                 0x8C46
+#define GL_SLUMINANCE8_EXT                0x8C47
+#define GL_COMPRESSED_SRGB_EXT            0x8C48
+#define GL_COMPRESSED_SRGB_ALPHA_EXT      0x8C49
+#define GL_COMPRESSED_SLUMINANCE_EXT      0x8C4A
+#define GL_COMPRESSED_SLUMINANCE_ALPHA_EXT 0x8C4B
+#define GL_COMPRESSED_SRGB_S3TC_DXT1_EXT  0x8C4C
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT1_EXT 0x8C4D
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT3_EXT 0x8C4E
+#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT5_EXT 0x8C4F
+#endif /* GL_EXT_texture_sRGB */
+
+#ifndef GL_EXT_texture_sRGB_decode
+#define GL_EXT_texture_sRGB_decode 1
+#define GL_TEXTURE_SRGB_DECODE_EXT        0x8A48
+#define GL_DECODE_EXT                     0x8A49
+#define GL_SKIP_DECODE_EXT                0x8A4A
+#endif /* GL_EXT_texture_sRGB_decode */
+
+#ifndef GL_EXT_texture_shared_exponent
+#define GL_EXT_texture_shared_exponent 1
+#define GL_RGB9_E5_EXT                    0x8C3D
+#define GL_UNSIGNED_INT_5_9_9_9_REV_EXT   0x8C3E
+#define GL_TEXTURE_SHARED_SIZE_EXT        0x8C3F
+#endif /* GL_EXT_texture_shared_exponent */
+
+#ifndef GL_EXT_texture_snorm
+#define GL_EXT_texture_snorm 1
+#define GL_ALPHA_SNORM                    0x9010
+#define GL_LUMINANCE_SNORM                0x9011
+#define GL_LUMINANCE_ALPHA_SNORM          0x9012
+#define GL_INTENSITY_SNORM                0x9013
+#define GL_ALPHA8_SNORM                   0x9014
+#define GL_LUMINANCE8_SNORM               0x9015
+#define GL_LUMINANCE8_ALPHA8_SNORM        0x9016
+#define GL_INTENSITY8_SNORM               0x9017
+#define GL_ALPHA16_SNORM                  0x9018
+#define GL_LUMINANCE16_SNORM              0x9019
+#define GL_LUMINANCE16_ALPHA16_SNORM      0x901A
+#define GL_INTENSITY16_SNORM              0x901B
+#define GL_RED_SNORM                      0x8F90
+#define GL_RG_SNORM                       0x8F91
+#define GL_RGB_SNORM                      0x8F92
+#define GL_RGBA_SNORM                     0x8F93
+#endif /* GL_EXT_texture_snorm */
+
+#ifndef GL_EXT_texture_swizzle
+#define GL_EXT_texture_swizzle 1
+#define GL_TEXTURE_SWIZZLE_R_EXT          0x8E42
+#define GL_TEXTURE_SWIZZLE_G_EXT          0x8E43
+#define GL_TEXTURE_SWIZZLE_B_EXT          0x8E44
+#define GL_TEXTURE_SWIZZLE_A_EXT          0x8E45
+#define GL_TEXTURE_SWIZZLE_RGBA_EXT       0x8E46
+#endif /* GL_EXT_texture_swizzle */
+
+#ifndef GL_EXT_timer_query
+#define GL_EXT_timer_query 1
+#define GL_TIME_ELAPSED_EXT               0x88BF
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTI64VEXTPROC) (GLuint id, GLenum pname, GLint64 *params);
+typedef void (APIENTRYP PFNGLGETQUERYOBJECTUI64VEXTPROC) (GLuint id, GLenum pname, GLuint64 *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGetQueryObjecti64vEXT (GLuint id, GLenum pname, GLint64 *params);
+GLAPI void APIENTRY glGetQueryObjectui64vEXT (GLuint id, GLenum pname, GLuint64 *params);
 #endif
+#endif /* GL_EXT_timer_query */
 
 #ifndef GL_EXT_transform_feedback
+#define GL_EXT_transform_feedback 1
 #define GL_TRANSFORM_FEEDBACK_BUFFER_EXT  0x8C8E
 #define GL_TRANSFORM_FEEDBACK_BUFFER_START_EXT 0x8C84
 #define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE_EXT 0x8C85
@@ -5519,340 +8072,1140 @@ extern "C" {
 #define GL_TRANSFORM_FEEDBACK_VARYINGS_EXT 0x8C83
 #define GL_TRANSFORM_FEEDBACK_BUFFER_MODE_EXT 0x8C7F
 #define GL_TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH_EXT 0x8C76
+typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKEXTPROC) (GLenum primitiveMode);
+typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKEXTPROC) (void);
+typedef void (APIENTRYP PFNGLBINDBUFFERRANGEEXTPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLBINDBUFFEROFFSETEXTPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
+typedef void (APIENTRYP PFNGLBINDBUFFERBASEEXTPROC) (GLenum target, GLuint index, GLuint buffer);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSEXTPROC) (GLuint program, GLsizei count, const GLchar *const*varyings, GLenum bufferMode);
+typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGEXTPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBeginTransformFeedbackEXT (GLenum primitiveMode);
+GLAPI void APIENTRY glEndTransformFeedbackEXT (void);
+GLAPI void APIENTRY glBindBufferRangeEXT (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+GLAPI void APIENTRY glBindBufferOffsetEXT (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
+GLAPI void APIENTRY glBindBufferBaseEXT (GLenum target, GLuint index, GLuint buffer);
+GLAPI void APIENTRY glTransformFeedbackVaryingsEXT (GLuint program, GLsizei count, const GLchar *const*varyings, GLenum bufferMode);
+GLAPI void APIENTRY glGetTransformFeedbackVaryingEXT (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
 #endif
+#endif /* GL_EXT_transform_feedback */
 
-#ifndef GL_EXT_direct_state_access
-#define GL_PROGRAM_MATRIX_EXT             0x8E2D
-#define GL_TRANSPOSE_PROGRAM_MATRIX_EXT   0x8E2E
-#define GL_PROGRAM_MATRIX_STACK_DEPTH_EXT 0x8E2F
+#ifndef GL_EXT_vertex_array
+#define GL_EXT_vertex_array 1
+#define GL_VERTEX_ARRAY_EXT               0x8074
+#define GL_NORMAL_ARRAY_EXT               0x8075
+#define GL_COLOR_ARRAY_EXT                0x8076
+#define GL_INDEX_ARRAY_EXT                0x8077
+#define GL_TEXTURE_COORD_ARRAY_EXT        0x8078
+#define GL_EDGE_FLAG_ARRAY_EXT            0x8079
+#define GL_VERTEX_ARRAY_SIZE_EXT          0x807A
+#define GL_VERTEX_ARRAY_TYPE_EXT          0x807B
+#define GL_VERTEX_ARRAY_STRIDE_EXT        0x807C
+#define GL_VERTEX_ARRAY_COUNT_EXT         0x807D
+#define GL_NORMAL_ARRAY_TYPE_EXT          0x807E
+#define GL_NORMAL_ARRAY_STRIDE_EXT        0x807F
+#define GL_NORMAL_ARRAY_COUNT_EXT         0x8080
+#define GL_COLOR_ARRAY_SIZE_EXT           0x8081
+#define GL_COLOR_ARRAY_TYPE_EXT           0x8082
+#define GL_COLOR_ARRAY_STRIDE_EXT         0x8083
+#define GL_COLOR_ARRAY_COUNT_EXT          0x8084
+#define GL_INDEX_ARRAY_TYPE_EXT           0x8085
+#define GL_INDEX_ARRAY_STRIDE_EXT         0x8086
+#define GL_INDEX_ARRAY_COUNT_EXT          0x8087
+#define GL_TEXTURE_COORD_ARRAY_SIZE_EXT   0x8088
+#define GL_TEXTURE_COORD_ARRAY_TYPE_EXT   0x8089
+#define GL_TEXTURE_COORD_ARRAY_STRIDE_EXT 0x808A
+#define GL_TEXTURE_COORD_ARRAY_COUNT_EXT  0x808B
+#define GL_EDGE_FLAG_ARRAY_STRIDE_EXT     0x808C
+#define GL_EDGE_FLAG_ARRAY_COUNT_EXT      0x808D
+#define GL_VERTEX_ARRAY_POINTER_EXT       0x808E
+#define GL_NORMAL_ARRAY_POINTER_EXT       0x808F
+#define GL_COLOR_ARRAY_POINTER_EXT        0x8090
+#define GL_INDEX_ARRAY_POINTER_EXT        0x8091
+#define GL_TEXTURE_COORD_ARRAY_POINTER_EXT 0x8092
+#define GL_EDGE_FLAG_ARRAY_POINTER_EXT    0x8093
+typedef void (APIENTRYP PFNGLARRAYELEMENTEXTPROC) (GLint i);
+typedef void (APIENTRYP PFNGLCOLORPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+typedef void (APIENTRYP PFNGLDRAWARRAYSEXTPROC) (GLenum mode, GLint first, GLsizei count);
+typedef void (APIENTRYP PFNGLEDGEFLAGPOINTEREXTPROC) (GLsizei stride, GLsizei count, const GLboolean *pointer);
+typedef void (APIENTRYP PFNGLGETPOINTERVEXTPROC) (GLenum pname, void **params);
+typedef void (APIENTRYP PFNGLINDEXPOINTEREXTPROC) (GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+typedef void (APIENTRYP PFNGLNORMALPOINTEREXTPROC) (GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+typedef void (APIENTRYP PFNGLTEXCOORDPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+typedef void (APIENTRYP PFNGLVERTEXPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glArrayElementEXT (GLint i);
+GLAPI void APIENTRY glColorPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+GLAPI void APIENTRY glDrawArraysEXT (GLenum mode, GLint first, GLsizei count);
+GLAPI void APIENTRY glEdgeFlagPointerEXT (GLsizei stride, GLsizei count, const GLboolean *pointer);
+GLAPI void APIENTRY glGetPointervEXT (GLenum pname, void **params);
+GLAPI void APIENTRY glIndexPointerEXT (GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+GLAPI void APIENTRY glNormalPointerEXT (GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+GLAPI void APIENTRY glTexCoordPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const void *pointer);
+GLAPI void APIENTRY glVertexPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const void *pointer);
 #endif
+#endif /* GL_EXT_vertex_array */
 
 #ifndef GL_EXT_vertex_array_bgra
-/* reuse GL_BGRA */
-#endif
+#define GL_EXT_vertex_array_bgra 1
+#endif /* GL_EXT_vertex_array_bgra */
 
-#ifndef GL_EXT_texture_swizzle
-#define GL_TEXTURE_SWIZZLE_R_EXT          0x8E42
-#define GL_TEXTURE_SWIZZLE_G_EXT          0x8E43
-#define GL_TEXTURE_SWIZZLE_B_EXT          0x8E44
-#define GL_TEXTURE_SWIZZLE_A_EXT          0x8E45
-#define GL_TEXTURE_SWIZZLE_RGBA_EXT       0x8E46
+#ifndef GL_EXT_vertex_attrib_64bit
+#define GL_EXT_vertex_attrib_64bit 1
+#define GL_DOUBLE_VEC2_EXT                0x8FFC
+#define GL_DOUBLE_VEC3_EXT                0x8FFD
+#define GL_DOUBLE_VEC4_EXT                0x8FFE
+#define GL_DOUBLE_MAT2_EXT                0x8F46
+#define GL_DOUBLE_MAT3_EXT                0x8F47
+#define GL_DOUBLE_MAT4_EXT                0x8F48
+#define GL_DOUBLE_MAT2x3_EXT              0x8F49
+#define GL_DOUBLE_MAT2x4_EXT              0x8F4A
+#define GL_DOUBLE_MAT3x2_EXT              0x8F4B
+#define GL_DOUBLE_MAT3x4_EXT              0x8F4C
+#define GL_DOUBLE_MAT4x2_EXT              0x8F4D
+#define GL_DOUBLE_MAT4x3_EXT              0x8F4E
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DEXTPROC) (GLuint index, GLdouble x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DEXTPROC) (GLuint index, GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DEXTPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DEXTPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DVEXTPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DVEXTPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DVEXTPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DVEXTPROC) (GLuint index, const GLdouble *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBLPOINTEREXTPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLDVEXTPROC) (GLuint index, GLenum pname, GLdouble *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexAttribL1dEXT (GLuint index, GLdouble x);
+GLAPI void APIENTRY glVertexAttribL2dEXT (GLuint index, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glVertexAttribL3dEXT (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glVertexAttribL4dEXT (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glVertexAttribL1dvEXT (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribL2dvEXT (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribL3dvEXT (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribL4dvEXT (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribLPointerEXT (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glGetVertexAttribLdvEXT (GLuint index, GLenum pname, GLdouble *params);
 #endif
+#endif /* GL_EXT_vertex_attrib_64bit */
 
-#ifndef GL_NV_explicit_multisample
-#define GL_SAMPLE_POSITION_NV             0x8E50
-#define GL_SAMPLE_MASK_NV                 0x8E51
-#define GL_SAMPLE_MASK_VALUE_NV           0x8E52
-#define GL_TEXTURE_BINDING_RENDERBUFFER_NV 0x8E53
-#define GL_TEXTURE_RENDERBUFFER_DATA_STORE_BINDING_NV 0x8E54
-#define GL_TEXTURE_RENDERBUFFER_NV        0x8E55
-#define GL_SAMPLER_RENDERBUFFER_NV        0x8E56
-#define GL_INT_SAMPLER_RENDERBUFFER_NV    0x8E57
-#define GL_UNSIGNED_INT_SAMPLER_RENDERBUFFER_NV 0x8E58
-#define GL_MAX_SAMPLE_MASK_WORDS_NV       0x8E59
+#ifndef GL_EXT_vertex_shader
+#define GL_EXT_vertex_shader 1
+#define GL_VERTEX_SHADER_EXT              0x8780
+#define GL_VERTEX_SHADER_BINDING_EXT      0x8781
+#define GL_OP_INDEX_EXT                   0x8782
+#define GL_OP_NEGATE_EXT                  0x8783
+#define GL_OP_DOT3_EXT                    0x8784
+#define GL_OP_DOT4_EXT                    0x8785
+#define GL_OP_MUL_EXT                     0x8786
+#define GL_OP_ADD_EXT                     0x8787
+#define GL_OP_MADD_EXT                    0x8788
+#define GL_OP_FRAC_EXT                    0x8789
+#define GL_OP_MAX_EXT                     0x878A
+#define GL_OP_MIN_EXT                     0x878B
+#define GL_OP_SET_GE_EXT                  0x878C
+#define GL_OP_SET_LT_EXT                  0x878D
+#define GL_OP_CLAMP_EXT                   0x878E
+#define GL_OP_FLOOR_EXT                   0x878F
+#define GL_OP_ROUND_EXT                   0x8790
+#define GL_OP_EXP_BASE_2_EXT              0x8791
+#define GL_OP_LOG_BASE_2_EXT              0x8792
+#define GL_OP_POWER_EXT                   0x8793
+#define GL_OP_RECIP_EXT                   0x8794
+#define GL_OP_RECIP_SQRT_EXT              0x8795
+#define GL_OP_SUB_EXT                     0x8796
+#define GL_OP_CROSS_PRODUCT_EXT           0x8797
+#define GL_OP_MULTIPLY_MATRIX_EXT         0x8798
+#define GL_OP_MOV_EXT                     0x8799
+#define GL_OUTPUT_VERTEX_EXT              0x879A
+#define GL_OUTPUT_COLOR0_EXT              0x879B
+#define GL_OUTPUT_COLOR1_EXT              0x879C
+#define GL_OUTPUT_TEXTURE_COORD0_EXT      0x879D
+#define GL_OUTPUT_TEXTURE_COORD1_EXT      0x879E
+#define GL_OUTPUT_TEXTURE_COORD2_EXT      0x879F
+#define GL_OUTPUT_TEXTURE_COORD3_EXT      0x87A0
+#define GL_OUTPUT_TEXTURE_COORD4_EXT      0x87A1
+#define GL_OUTPUT_TEXTURE_COORD5_EXT      0x87A2
+#define GL_OUTPUT_TEXTURE_COORD6_EXT      0x87A3
+#define GL_OUTPUT_TEXTURE_COORD7_EXT      0x87A4
+#define GL_OUTPUT_TEXTURE_COORD8_EXT      0x87A5
+#define GL_OUTPUT_TEXTURE_COORD9_EXT      0x87A6
+#define GL_OUTPUT_TEXTURE_COORD10_EXT     0x87A7
+#define GL_OUTPUT_TEXTURE_COORD11_EXT     0x87A8
+#define GL_OUTPUT_TEXTURE_COORD12_EXT     0x87A9
+#define GL_OUTPUT_TEXTURE_COORD13_EXT     0x87AA
+#define GL_OUTPUT_TEXTURE_COORD14_EXT     0x87AB
+#define GL_OUTPUT_TEXTURE_COORD15_EXT     0x87AC
+#define GL_OUTPUT_TEXTURE_COORD16_EXT     0x87AD
+#define GL_OUTPUT_TEXTURE_COORD17_EXT     0x87AE
+#define GL_OUTPUT_TEXTURE_COORD18_EXT     0x87AF
+#define GL_OUTPUT_TEXTURE_COORD19_EXT     0x87B0
+#define GL_OUTPUT_TEXTURE_COORD20_EXT     0x87B1
+#define GL_OUTPUT_TEXTURE_COORD21_EXT     0x87B2
+#define GL_OUTPUT_TEXTURE_COORD22_EXT     0x87B3
+#define GL_OUTPUT_TEXTURE_COORD23_EXT     0x87B4
+#define GL_OUTPUT_TEXTURE_COORD24_EXT     0x87B5
+#define GL_OUTPUT_TEXTURE_COORD25_EXT     0x87B6
+#define GL_OUTPUT_TEXTURE_COORD26_EXT     0x87B7
+#define GL_OUTPUT_TEXTURE_COORD27_EXT     0x87B8
+#define GL_OUTPUT_TEXTURE_COORD28_EXT     0x87B9
+#define GL_OUTPUT_TEXTURE_COORD29_EXT     0x87BA
+#define GL_OUTPUT_TEXTURE_COORD30_EXT     0x87BB
+#define GL_OUTPUT_TEXTURE_COORD31_EXT     0x87BC
+#define GL_OUTPUT_FOG_EXT                 0x87BD
+#define GL_SCALAR_EXT                     0x87BE
+#define GL_VECTOR_EXT                     0x87BF
+#define GL_MATRIX_EXT                     0x87C0
+#define GL_VARIANT_EXT                    0x87C1
+#define GL_INVARIANT_EXT                  0x87C2
+#define GL_LOCAL_CONSTANT_EXT             0x87C3
+#define GL_LOCAL_EXT                      0x87C4
+#define GL_MAX_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87C5
+#define GL_MAX_VERTEX_SHADER_VARIANTS_EXT 0x87C6
+#define GL_MAX_VERTEX_SHADER_INVARIANTS_EXT 0x87C7
+#define GL_MAX_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87C8
+#define GL_MAX_VERTEX_SHADER_LOCALS_EXT   0x87C9
+#define GL_MAX_OPTIMIZED_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87CA
+#define GL_MAX_OPTIMIZED_VERTEX_SHADER_VARIANTS_EXT 0x87CB
+#define GL_MAX_OPTIMIZED_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87CC
+#define GL_MAX_OPTIMIZED_VERTEX_SHADER_INVARIANTS_EXT 0x87CD
+#define GL_MAX_OPTIMIZED_VERTEX_SHADER_LOCALS_EXT 0x87CE
+#define GL_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87CF
+#define GL_VERTEX_SHADER_VARIANTS_EXT     0x87D0
+#define GL_VERTEX_SHADER_INVARIANTS_EXT   0x87D1
+#define GL_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87D2
+#define GL_VERTEX_SHADER_LOCALS_EXT       0x87D3
+#define GL_VERTEX_SHADER_OPTIMIZED_EXT    0x87D4
+#define GL_X_EXT                          0x87D5
+#define GL_Y_EXT                          0x87D6
+#define GL_Z_EXT                          0x87D7
+#define GL_W_EXT                          0x87D8
+#define GL_NEGATIVE_X_EXT                 0x87D9
+#define GL_NEGATIVE_Y_EXT                 0x87DA
+#define GL_NEGATIVE_Z_EXT                 0x87DB
+#define GL_NEGATIVE_W_EXT                 0x87DC
+#define GL_ZERO_EXT                       0x87DD
+#define GL_ONE_EXT                        0x87DE
+#define GL_NEGATIVE_ONE_EXT               0x87DF
+#define GL_NORMALIZED_RANGE_EXT           0x87E0
+#define GL_FULL_RANGE_EXT                 0x87E1
+#define GL_CURRENT_VERTEX_EXT             0x87E2
+#define GL_MVP_MATRIX_EXT                 0x87E3
+#define GL_VARIANT_VALUE_EXT              0x87E4
+#define GL_VARIANT_DATATYPE_EXT           0x87E5
+#define GL_VARIANT_ARRAY_STRIDE_EXT       0x87E6
+#define GL_VARIANT_ARRAY_TYPE_EXT         0x87E7
+#define GL_VARIANT_ARRAY_EXT              0x87E8
+#define GL_VARIANT_ARRAY_POINTER_EXT      0x87E9
+#define GL_INVARIANT_VALUE_EXT            0x87EA
+#define GL_INVARIANT_DATATYPE_EXT         0x87EB
+#define GL_LOCAL_CONSTANT_VALUE_EXT       0x87EC
+#define GL_LOCAL_CONSTANT_DATATYPE_EXT    0x87ED
+typedef void (APIENTRYP PFNGLBEGINVERTEXSHADEREXTPROC) (void);
+typedef void (APIENTRYP PFNGLENDVERTEXSHADEREXTPROC) (void);
+typedef void (APIENTRYP PFNGLBINDVERTEXSHADEREXTPROC) (GLuint id);
+typedef GLuint (APIENTRYP PFNGLGENVERTEXSHADERSEXTPROC) (GLuint range);
+typedef void (APIENTRYP PFNGLDELETEVERTEXSHADEREXTPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLSHADEROP1EXTPROC) (GLenum op, GLuint res, GLuint arg1);
+typedef void (APIENTRYP PFNGLSHADEROP2EXTPROC) (GLenum op, GLuint res, GLuint arg1, GLuint arg2);
+typedef void (APIENTRYP PFNGLSHADEROP3EXTPROC) (GLenum op, GLuint res, GLuint arg1, GLuint arg2, GLuint arg3);
+typedef void (APIENTRYP PFNGLSWIZZLEEXTPROC) (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
+typedef void (APIENTRYP PFNGLWRITEMASKEXTPROC) (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
+typedef void (APIENTRYP PFNGLINSERTCOMPONENTEXTPROC) (GLuint res, GLuint src, GLuint num);
+typedef void (APIENTRYP PFNGLEXTRACTCOMPONENTEXTPROC) (GLuint res, GLuint src, GLuint num);
+typedef GLuint (APIENTRYP PFNGLGENSYMBOLSEXTPROC) (GLenum datatype, GLenum storagetype, GLenum range, GLuint components);
+typedef void (APIENTRYP PFNGLSETINVARIANTEXTPROC) (GLuint id, GLenum type, const void *addr);
+typedef void (APIENTRYP PFNGLSETLOCALCONSTANTEXTPROC) (GLuint id, GLenum type, const void *addr);
+typedef void (APIENTRYP PFNGLVARIANTBVEXTPROC) (GLuint id, const GLbyte *addr);
+typedef void (APIENTRYP PFNGLVARIANTSVEXTPROC) (GLuint id, const GLshort *addr);
+typedef void (APIENTRYP PFNGLVARIANTIVEXTPROC) (GLuint id, const GLint *addr);
+typedef void (APIENTRYP PFNGLVARIANTFVEXTPROC) (GLuint id, const GLfloat *addr);
+typedef void (APIENTRYP PFNGLVARIANTDVEXTPROC) (GLuint id, const GLdouble *addr);
+typedef void (APIENTRYP PFNGLVARIANTUBVEXTPROC) (GLuint id, const GLubyte *addr);
+typedef void (APIENTRYP PFNGLVARIANTUSVEXTPROC) (GLuint id, const GLushort *addr);
+typedef void (APIENTRYP PFNGLVARIANTUIVEXTPROC) (GLuint id, const GLuint *addr);
+typedef void (APIENTRYP PFNGLVARIANTPOINTEREXTPROC) (GLuint id, GLenum type, GLuint stride, const void *addr);
+typedef void (APIENTRYP PFNGLENABLEVARIANTCLIENTSTATEEXTPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLDISABLEVARIANTCLIENTSTATEEXTPROC) (GLuint id);
+typedef GLuint (APIENTRYP PFNGLBINDLIGHTPARAMETEREXTPROC) (GLenum light, GLenum value);
+typedef GLuint (APIENTRYP PFNGLBINDMATERIALPARAMETEREXTPROC) (GLenum face, GLenum value);
+typedef GLuint (APIENTRYP PFNGLBINDTEXGENPARAMETEREXTPROC) (GLenum unit, GLenum coord, GLenum value);
+typedef GLuint (APIENTRYP PFNGLBINDTEXTUREUNITPARAMETEREXTPROC) (GLenum unit, GLenum value);
+typedef GLuint (APIENTRYP PFNGLBINDPARAMETEREXTPROC) (GLenum value);
+typedef GLboolean (APIENTRYP PFNGLISVARIANTENABLEDEXTPROC) (GLuint id, GLenum cap);
+typedef void (APIENTRYP PFNGLGETVARIANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data);
+typedef void (APIENTRYP PFNGLGETVARIANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data);
+typedef void (APIENTRYP PFNGLGETVARIANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data);
+typedef void (APIENTRYP PFNGLGETVARIANTPOINTERVEXTPROC) (GLuint id, GLenum value, void **data);
+typedef void (APIENTRYP PFNGLGETINVARIANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data);
+typedef void (APIENTRYP PFNGLGETINVARIANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data);
+typedef void (APIENTRYP PFNGLGETINVARIANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data);
+typedef void (APIENTRYP PFNGLGETLOCALCONSTANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data);
+typedef void (APIENTRYP PFNGLGETLOCALCONSTANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data);
+typedef void (APIENTRYP PFNGLGETLOCALCONSTANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBeginVertexShaderEXT (void);
+GLAPI void APIENTRY glEndVertexShaderEXT (void);
+GLAPI void APIENTRY glBindVertexShaderEXT (GLuint id);
+GLAPI GLuint APIENTRY glGenVertexShadersEXT (GLuint range);
+GLAPI void APIENTRY glDeleteVertexShaderEXT (GLuint id);
+GLAPI void APIENTRY glShaderOp1EXT (GLenum op, GLuint res, GLuint arg1);
+GLAPI void APIENTRY glShaderOp2EXT (GLenum op, GLuint res, GLuint arg1, GLuint arg2);
+GLAPI void APIENTRY glShaderOp3EXT (GLenum op, GLuint res, GLuint arg1, GLuint arg2, GLuint arg3);
+GLAPI void APIENTRY glSwizzleEXT (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
+GLAPI void APIENTRY glWriteMaskEXT (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
+GLAPI void APIENTRY glInsertComponentEXT (GLuint res, GLuint src, GLuint num);
+GLAPI void APIENTRY glExtractComponentEXT (GLuint res, GLuint src, GLuint num);
+GLAPI GLuint APIENTRY glGenSymbolsEXT (GLenum datatype, GLenum storagetype, GLenum range, GLuint components);
+GLAPI void APIENTRY glSetInvariantEXT (GLuint id, GLenum type, const void *addr);
+GLAPI void APIENTRY glSetLocalConstantEXT (GLuint id, GLenum type, const void *addr);
+GLAPI void APIENTRY glVariantbvEXT (GLuint id, const GLbyte *addr);
+GLAPI void APIENTRY glVariantsvEXT (GLuint id, const GLshort *addr);
+GLAPI void APIENTRY glVariantivEXT (GLuint id, const GLint *addr);
+GLAPI void APIENTRY glVariantfvEXT (GLuint id, const GLfloat *addr);
+GLAPI void APIENTRY glVariantdvEXT (GLuint id, const GLdouble *addr);
+GLAPI void APIENTRY glVariantubvEXT (GLuint id, const GLubyte *addr);
+GLAPI void APIENTRY glVariantusvEXT (GLuint id, const GLushort *addr);
+GLAPI void APIENTRY glVariantuivEXT (GLuint id, const GLuint *addr);
+GLAPI void APIENTRY glVariantPointerEXT (GLuint id, GLenum type, GLuint stride, const void *addr);
+GLAPI void APIENTRY glEnableVariantClientStateEXT (GLuint id);
+GLAPI void APIENTRY glDisableVariantClientStateEXT (GLuint id);
+GLAPI GLuint APIENTRY glBindLightParameterEXT (GLenum light, GLenum value);
+GLAPI GLuint APIENTRY glBindMaterialParameterEXT (GLenum face, GLenum value);
+GLAPI GLuint APIENTRY glBindTexGenParameterEXT (GLenum unit, GLenum coord, GLenum value);
+GLAPI GLuint APIENTRY glBindTextureUnitParameterEXT (GLenum unit, GLenum value);
+GLAPI GLuint APIENTRY glBindParameterEXT (GLenum value);
+GLAPI GLboolean APIENTRY glIsVariantEnabledEXT (GLuint id, GLenum cap);
+GLAPI void APIENTRY glGetVariantBooleanvEXT (GLuint id, GLenum value, GLboolean *data);
+GLAPI void APIENTRY glGetVariantIntegervEXT (GLuint id, GLenum value, GLint *data);
+GLAPI void APIENTRY glGetVariantFloatvEXT (GLuint id, GLenum value, GLfloat *data);
+GLAPI void APIENTRY glGetVariantPointervEXT (GLuint id, GLenum value, void **data);
+GLAPI void APIENTRY glGetInvariantBooleanvEXT (GLuint id, GLenum value, GLboolean *data);
+GLAPI void APIENTRY glGetInvariantIntegervEXT (GLuint id, GLenum value, GLint *data);
+GLAPI void APIENTRY glGetInvariantFloatvEXT (GLuint id, GLenum value, GLfloat *data);
+GLAPI void APIENTRY glGetLocalConstantBooleanvEXT (GLuint id, GLenum value, GLboolean *data);
+GLAPI void APIENTRY glGetLocalConstantIntegervEXT (GLuint id, GLenum value, GLint *data);
+GLAPI void APIENTRY glGetLocalConstantFloatvEXT (GLuint id, GLenum value, GLfloat *data);
 #endif
+#endif /* GL_EXT_vertex_shader */
 
-#ifndef GL_NV_transform_feedback2
-#define GL_TRANSFORM_FEEDBACK_NV          0x8E22
-#define GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED_NV 0x8E23
-#define GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE_NV 0x8E24
-#define GL_TRANSFORM_FEEDBACK_BINDING_NV  0x8E25
+#ifndef GL_EXT_vertex_weighting
+#define GL_EXT_vertex_weighting 1
+#define GL_MODELVIEW0_STACK_DEPTH_EXT     0x0BA3
+#define GL_MODELVIEW1_STACK_DEPTH_EXT     0x8502
+#define GL_MODELVIEW0_MATRIX_EXT          0x0BA6
+#define GL_MODELVIEW1_MATRIX_EXT          0x8506
+#define GL_VERTEX_WEIGHTING_EXT           0x8509
+#define GL_MODELVIEW0_EXT                 0x1700
+#define GL_MODELVIEW1_EXT                 0x850A
+#define GL_CURRENT_VERTEX_WEIGHT_EXT      0x850B
+#define GL_VERTEX_WEIGHT_ARRAY_EXT        0x850C
+#define GL_VERTEX_WEIGHT_ARRAY_SIZE_EXT   0x850D
+#define GL_VERTEX_WEIGHT_ARRAY_TYPE_EXT   0x850E
+#define GL_VERTEX_WEIGHT_ARRAY_STRIDE_EXT 0x850F
+#define GL_VERTEX_WEIGHT_ARRAY_POINTER_EXT 0x8510
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTFEXTPROC) (GLfloat weight);
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTFVEXTPROC) (const GLfloat *weight);
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, const void *pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexWeightfEXT (GLfloat weight);
+GLAPI void APIENTRY glVertexWeightfvEXT (const GLfloat *weight);
+GLAPI void APIENTRY glVertexWeightPointerEXT (GLint size, GLenum type, GLsizei stride, const void *pointer);
 #endif
+#endif /* GL_EXT_vertex_weighting */
 
-#ifndef GL_ATI_meminfo
-#define GL_VBO_FREE_MEMORY_ATI            0x87FB
-#define GL_TEXTURE_FREE_MEMORY_ATI        0x87FC
-#define GL_RENDERBUFFER_FREE_MEMORY_ATI   0x87FD
+#ifndef GL_EXT_x11_sync_object
+#define GL_EXT_x11_sync_object 1
+#define GL_SYNC_X11_FENCE_EXT             0x90E1
+typedef GLsync (APIENTRYP PFNGLIMPORTSYNCEXTPROC) (GLenum external_sync_type, GLintptr external_sync, GLbitfield flags);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLsync APIENTRY glImportSyncEXT (GLenum external_sync_type, GLintptr external_sync, GLbitfield flags);
 #endif
+#endif /* GL_EXT_x11_sync_object */
 
-#ifndef GL_AMD_performance_monitor
-#define GL_COUNTER_TYPE_AMD               0x8BC0
-#define GL_COUNTER_RANGE_AMD              0x8BC1
-#define GL_UNSIGNED_INT64_AMD             0x8BC2
-#define GL_PERCENTAGE_AMD                 0x8BC3
-#define GL_PERFMON_RESULT_AVAILABLE_AMD   0x8BC4
-#define GL_PERFMON_RESULT_SIZE_AMD        0x8BC5
-#define GL_PERFMON_RESULT_AMD             0x8BC6
+#ifndef GL_GREMEDY_frame_terminator
+#define GL_GREMEDY_frame_terminator 1
+typedef void (APIENTRYP PFNGLFRAMETERMINATORGREMEDYPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glFrameTerminatorGREMEDY (void);
 #endif
+#endif /* GL_GREMEDY_frame_terminator */
 
-#ifndef GL_AMD_texture_texture4
+#ifndef GL_GREMEDY_string_marker
+#define GL_GREMEDY_string_marker 1
+typedef void (APIENTRYP PFNGLSTRINGMARKERGREMEDYPROC) (GLsizei len, const void *string);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glStringMarkerGREMEDY (GLsizei len, const void *string);
 #endif
+#endif /* GL_GREMEDY_string_marker */
 
-#ifndef GL_AMD_vertex_shader_tesselator
-#define GL_SAMPLER_BUFFER_AMD             0x9001
-#define GL_INT_SAMPLER_BUFFER_AMD         0x9002
-#define GL_UNSIGNED_INT_SAMPLER_BUFFER_AMD 0x9003
-#define GL_TESSELLATION_MODE_AMD          0x9004
-#define GL_TESSELLATION_FACTOR_AMD        0x9005
-#define GL_DISCRETE_AMD                   0x9006
-#define GL_CONTINUOUS_AMD                 0x9007
+#ifndef GL_HP_convolution_border_modes
+#define GL_HP_convolution_border_modes 1
+#define GL_IGNORE_BORDER_HP               0x8150
+#define GL_CONSTANT_BORDER_HP             0x8151
+#define GL_REPLICATE_BORDER_HP            0x8153
+#define GL_CONVOLUTION_BORDER_COLOR_HP    0x8154
+#endif /* GL_HP_convolution_border_modes */
+
+#ifndef GL_HP_image_transform
+#define GL_HP_image_transform 1
+#define GL_IMAGE_SCALE_X_HP               0x8155
+#define GL_IMAGE_SCALE_Y_HP               0x8156
+#define GL_IMAGE_TRANSLATE_X_HP           0x8157
+#define GL_IMAGE_TRANSLATE_Y_HP           0x8158
+#define GL_IMAGE_ROTATE_ANGLE_HP          0x8159
+#define GL_IMAGE_ROTATE_ORIGIN_X_HP       0x815A
+#define GL_IMAGE_ROTATE_ORIGIN_Y_HP       0x815B
+#define GL_IMAGE_MAG_FILTER_HP            0x815C
+#define GL_IMAGE_MIN_FILTER_HP            0x815D
+#define GL_IMAGE_CUBIC_WEIGHT_HP          0x815E
+#define GL_CUBIC_HP                       0x815F
+#define GL_AVERAGE_HP                     0x8160
+#define GL_IMAGE_TRANSFORM_2D_HP          0x8161
+#define GL_POST_IMAGE_TRANSFORM_COLOR_TABLE_HP 0x8162
+#define GL_PROXY_POST_IMAGE_TRANSFORM_COLOR_TABLE_HP 0x8163
+typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERIHPPROC) (GLenum target, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERFHPPROC) (GLenum target, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERIVHPPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERFVHPPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETIMAGETRANSFORMPARAMETERIVHPPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETIMAGETRANSFORMPARAMETERFVHPPROC) (GLenum target, GLenum pname, GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glImageTransformParameteriHP (GLenum target, GLenum pname, GLint param);
+GLAPI void APIENTRY glImageTransformParameterfHP (GLenum target, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glImageTransformParameterivHP (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glImageTransformParameterfvHP (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glGetImageTransformParameterivHP (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetImageTransformParameterfvHP (GLenum target, GLenum pname, GLfloat *params);
 #endif
+#endif /* GL_HP_image_transform */
 
-#ifndef GL_EXT_provoking_vertex
-#define GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION_EXT 0x8E4C
-#define GL_FIRST_VERTEX_CONVENTION_EXT    0x8E4D
-#define GL_LAST_VERTEX_CONVENTION_EXT     0x8E4E
-#define GL_PROVOKING_VERTEX_EXT           0x8E4F
+#ifndef GL_HP_occlusion_test
+#define GL_HP_occlusion_test 1
+#define GL_OCCLUSION_TEST_HP              0x8165
+#define GL_OCCLUSION_TEST_RESULT_HP       0x8166
+#endif /* GL_HP_occlusion_test */
+
+#ifndef GL_HP_texture_lighting
+#define GL_HP_texture_lighting 1
+#define GL_TEXTURE_LIGHTING_MODE_HP       0x8167
+#define GL_TEXTURE_POST_SPECULAR_HP       0x8168
+#define GL_TEXTURE_PRE_SPECULAR_HP        0x8169
+#endif /* GL_HP_texture_lighting */
+
+#ifndef GL_IBM_cull_vertex
+#define GL_IBM_cull_vertex 1
+#define GL_CULL_VERTEX_IBM                103050
+#endif /* GL_IBM_cull_vertex */
+
+#ifndef GL_IBM_multimode_draw_arrays
+#define GL_IBM_multimode_draw_arrays 1
+typedef void (APIENTRYP PFNGLMULTIMODEDRAWARRAYSIBMPROC) (const GLenum *mode, const GLint *first, const GLsizei *count, GLsizei primcount, GLint modestride);
+typedef void (APIENTRYP PFNGLMULTIMODEDRAWELEMENTSIBMPROC) (const GLenum *mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei primcount, GLint modestride);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiModeDrawArraysIBM (const GLenum *mode, const GLint *first, const GLsizei *count, GLsizei primcount, GLint modestride);
+GLAPI void APIENTRY glMultiModeDrawElementsIBM (const GLenum *mode, const GLsizei *count, GLenum type, const void *const*indices, GLsizei primcount, GLint modestride);
 #endif
+#endif /* GL_IBM_multimode_draw_arrays */
 
-#ifndef GL_EXT_texture_snorm
-#define GL_ALPHA_SNORM                    0x9010
-#define GL_LUMINANCE_SNORM                0x9011
-#define GL_LUMINANCE_ALPHA_SNORM          0x9012
-#define GL_INTENSITY_SNORM                0x9013
-#define GL_ALPHA8_SNORM                   0x9014
-#define GL_LUMINANCE8_SNORM               0x9015
-#define GL_LUMINANCE8_ALPHA8_SNORM        0x9016
-#define GL_INTENSITY8_SNORM               0x9017
-#define GL_ALPHA16_SNORM                  0x9018
-#define GL_LUMINANCE16_SNORM              0x9019
-#define GL_LUMINANCE16_ALPHA16_SNORM      0x901A
-#define GL_INTENSITY16_SNORM              0x901B
-/* reuse GL_RED_SNORM */
-/* reuse GL_RG_SNORM */
-/* reuse GL_RGB_SNORM */
-/* reuse GL_RGBA_SNORM */
-/* reuse GL_R8_SNORM */
-/* reuse GL_RG8_SNORM */
-/* reuse GL_RGB8_SNORM */
-/* reuse GL_RGBA8_SNORM */
-/* reuse GL_R16_SNORM */
-/* reuse GL_RG16_SNORM */
-/* reuse GL_RGB16_SNORM */
-/* reuse GL_RGBA16_SNORM */
-/* reuse GL_SIGNED_NORMALIZED */
+#ifndef GL_IBM_rasterpos_clip
+#define GL_IBM_rasterpos_clip 1
+#define GL_RASTER_POSITION_UNCLIPPED_IBM  0x19262
+#endif /* GL_IBM_rasterpos_clip */
+
+#ifndef GL_IBM_static_data
+#define GL_IBM_static_data 1
+#define GL_ALL_STATIC_DATA_IBM            103060
+#define GL_STATIC_VERTEX_ARRAY_IBM        103061
+typedef void (APIENTRYP PFNGLFLUSHSTATICDATAIBMPROC) (GLenum target);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glFlushStaticDataIBM (GLenum target);
 #endif
+#endif /* GL_IBM_static_data */
 
-#ifndef GL_AMD_draw_buffers_blend
+#ifndef GL_IBM_texture_mirrored_repeat
+#define GL_IBM_texture_mirrored_repeat 1
+#define GL_MIRRORED_REPEAT_IBM            0x8370
+#endif /* GL_IBM_texture_mirrored_repeat */
+
+#ifndef GL_IBM_vertex_array_lists
+#define GL_IBM_vertex_array_lists 1
+#define GL_VERTEX_ARRAY_LIST_IBM          103070
+#define GL_NORMAL_ARRAY_LIST_IBM          103071
+#define GL_COLOR_ARRAY_LIST_IBM           103072
+#define GL_INDEX_ARRAY_LIST_IBM           103073
+#define GL_TEXTURE_COORD_ARRAY_LIST_IBM   103074
+#define GL_EDGE_FLAG_ARRAY_LIST_IBM       103075
+#define GL_FOG_COORDINATE_ARRAY_LIST_IBM  103076
+#define GL_SECONDARY_COLOR_ARRAY_LIST_IBM 103077
+#define GL_VERTEX_ARRAY_LIST_STRIDE_IBM   103080
+#define GL_NORMAL_ARRAY_LIST_STRIDE_IBM   103081
+#define GL_COLOR_ARRAY_LIST_STRIDE_IBM    103082
+#define GL_INDEX_ARRAY_LIST_STRIDE_IBM    103083
+#define GL_TEXTURE_COORD_ARRAY_LIST_STRIDE_IBM 103084
+#define GL_EDGE_FLAG_ARRAY_LIST_STRIDE_IBM 103085
+#define GL_FOG_COORDINATE_ARRAY_LIST_STRIDE_IBM 103086
+#define GL_SECONDARY_COLOR_ARRAY_LIST_STRIDE_IBM 103087
+typedef void (APIENTRYP PFNGLCOLORPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLEDGEFLAGPOINTERLISTIBMPROC) (GLint stride, const GLboolean **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLFOGCOORDPOINTERLISTIBMPROC) (GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLINDEXPOINTERLISTIBMPROC) (GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLNORMALPOINTERLISTIBMPROC) (GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLTEXCOORDPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+typedef void (APIENTRYP PFNGLVERTEXPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glColorPointerListIBM (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+GLAPI void APIENTRY glSecondaryColorPointerListIBM (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+GLAPI void APIENTRY glEdgeFlagPointerListIBM (GLint stride, const GLboolean **pointer, GLint ptrstride);
+GLAPI void APIENTRY glFogCoordPointerListIBM (GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+GLAPI void APIENTRY glIndexPointerListIBM (GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+GLAPI void APIENTRY glNormalPointerListIBM (GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+GLAPI void APIENTRY glTexCoordPointerListIBM (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+GLAPI void APIENTRY glVertexPointerListIBM (GLint size, GLenum type, GLint stride, const void **pointer, GLint ptrstride);
+#endif
+#endif /* GL_IBM_vertex_array_lists */
+
+#ifndef GL_INGR_blend_func_separate
+#define GL_INGR_blend_func_separate 1
+typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEINGRPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendFuncSeparateINGR (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
 #endif
+#endif /* GL_INGR_blend_func_separate */
 
-#ifndef GL_APPLE_texture_range
-#define GL_TEXTURE_RANGE_LENGTH_APPLE     0x85B7
-#define GL_TEXTURE_RANGE_POINTER_APPLE    0x85B8
-#define GL_TEXTURE_STORAGE_HINT_APPLE     0x85BC
-#define GL_STORAGE_PRIVATE_APPLE          0x85BD
-/* reuse GL_STORAGE_CACHED_APPLE */
-/* reuse GL_STORAGE_SHARED_APPLE */
+#ifndef GL_INGR_color_clamp
+#define GL_INGR_color_clamp 1
+#define GL_RED_MIN_CLAMP_INGR             0x8560
+#define GL_GREEN_MIN_CLAMP_INGR           0x8561
+#define GL_BLUE_MIN_CLAMP_INGR            0x8562
+#define GL_ALPHA_MIN_CLAMP_INGR           0x8563
+#define GL_RED_MAX_CLAMP_INGR             0x8564
+#define GL_GREEN_MAX_CLAMP_INGR           0x8565
+#define GL_BLUE_MAX_CLAMP_INGR            0x8566
+#define GL_ALPHA_MAX_CLAMP_INGR           0x8567
+#endif /* GL_INGR_color_clamp */
+
+#ifndef GL_INGR_interlace_read
+#define GL_INGR_interlace_read 1
+#define GL_INTERLACE_READ_INGR            0x8568
+#endif /* GL_INGR_interlace_read */
+
+#ifndef GL_INTEL_fragment_shader_ordering
+#define GL_INTEL_fragment_shader_ordering 1
+#endif /* GL_INTEL_fragment_shader_ordering */
+
+#ifndef GL_INTEL_map_texture
+#define GL_INTEL_map_texture 1
+#define GL_TEXTURE_MEMORY_LAYOUT_INTEL    0x83FF
+#define GL_LAYOUT_DEFAULT_INTEL           0
+#define GL_LAYOUT_LINEAR_INTEL            1
+#define GL_LAYOUT_LINEAR_CPU_CACHED_INTEL 2
+typedef void (APIENTRYP PFNGLSYNCTEXTUREINTELPROC) (GLuint texture);
+typedef void (APIENTRYP PFNGLUNMAPTEXTURE2DINTELPROC) (GLuint texture, GLint level);
+typedef void *(APIENTRYP PFNGLMAPTEXTURE2DINTELPROC) (GLuint texture, GLint level, GLbitfield access, GLint *stride, GLenum *layout);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glSyncTextureINTEL (GLuint texture);
+GLAPI void APIENTRY glUnmapTexture2DINTEL (GLuint texture, GLint level);
+GLAPI void *APIENTRY glMapTexture2DINTEL (GLuint texture, GLint level, GLbitfield access, GLint *stride, GLenum *layout);
 #endif
+#endif /* GL_INTEL_map_texture */
 
-#ifndef GL_APPLE_float_pixels
-#define GL_HALF_APPLE                     0x140B
-#define GL_RGBA_FLOAT32_APPLE             0x8814
-#define GL_RGB_FLOAT32_APPLE              0x8815
-#define GL_ALPHA_FLOAT32_APPLE            0x8816
-#define GL_INTENSITY_FLOAT32_APPLE        0x8817
-#define GL_LUMINANCE_FLOAT32_APPLE        0x8818
-#define GL_LUMINANCE_ALPHA_FLOAT32_APPLE  0x8819
-#define GL_RGBA_FLOAT16_APPLE             0x881A
-#define GL_RGB_FLOAT16_APPLE              0x881B
-#define GL_ALPHA_FLOAT16_APPLE            0x881C
-#define GL_INTENSITY_FLOAT16_APPLE        0x881D
-#define GL_LUMINANCE_FLOAT16_APPLE        0x881E
-#define GL_LUMINANCE_ALPHA_FLOAT16_APPLE  0x881F
-#define GL_COLOR_FLOAT_APPLE              0x8A0F
+#ifndef GL_INTEL_parallel_arrays
+#define GL_INTEL_parallel_arrays 1
+#define GL_PARALLEL_ARRAYS_INTEL          0x83F4
+#define GL_VERTEX_ARRAY_PARALLEL_POINTERS_INTEL 0x83F5
+#define GL_NORMAL_ARRAY_PARALLEL_POINTERS_INTEL 0x83F6
+#define GL_COLOR_ARRAY_PARALLEL_POINTERS_INTEL 0x83F7
+#define GL_TEXTURE_COORD_ARRAY_PARALLEL_POINTERS_INTEL 0x83F8
+typedef void (APIENTRYP PFNGLVERTEXPOINTERVINTELPROC) (GLint size, GLenum type, const void **pointer);
+typedef void (APIENTRYP PFNGLNORMALPOINTERVINTELPROC) (GLenum type, const void **pointer);
+typedef void (APIENTRYP PFNGLCOLORPOINTERVINTELPROC) (GLint size, GLenum type, const void **pointer);
+typedef void (APIENTRYP PFNGLTEXCOORDPOINTERVINTELPROC) (GLint size, GLenum type, const void **pointer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertexPointervINTEL (GLint size, GLenum type, const void **pointer);
+GLAPI void APIENTRY glNormalPointervINTEL (GLenum type, const void **pointer);
+GLAPI void APIENTRY glColorPointervINTEL (GLint size, GLenum type, const void **pointer);
+GLAPI void APIENTRY glTexCoordPointervINTEL (GLint size, GLenum type, const void **pointer);
+#endif
+#endif /* GL_INTEL_parallel_arrays */
+
+#ifndef GL_INTEL_performance_query
+#define GL_INTEL_performance_query 1
+#define GL_PERFQUERY_SINGLE_CONTEXT_INTEL 0x00000000
+#define GL_PERFQUERY_GLOBAL_CONTEXT_INTEL 0x00000001
+#define GL_PERFQUERY_WAIT_INTEL           0x83FB
+#define GL_PERFQUERY_FLUSH_INTEL          0x83FA
+#define GL_PERFQUERY_DONOT_FLUSH_INTEL    0x83F9
+#define GL_PERFQUERY_COUNTER_EVENT_INTEL  0x94F0
+#define GL_PERFQUERY_COUNTER_DURATION_NORM_INTEL 0x94F1
+#define GL_PERFQUERY_COUNTER_DURATION_RAW_INTEL 0x94F2
+#define GL_PERFQUERY_COUNTER_THROUGHPUT_INTEL 0x94F3
+#define GL_PERFQUERY_COUNTER_RAW_INTEL    0x94F4
+#define GL_PERFQUERY_COUNTER_TIMESTAMP_INTEL 0x94F5
+#define GL_PERFQUERY_COUNTER_DATA_UINT32_INTEL 0x94F8
+#define GL_PERFQUERY_COUNTER_DATA_UINT64_INTEL 0x94F9
+#define GL_PERFQUERY_COUNTER_DATA_FLOAT_INTEL 0x94FA
+#define GL_PERFQUERY_COUNTER_DATA_DOUBLE_INTEL 0x94FB
+#define GL_PERFQUERY_COUNTER_DATA_BOOL32_INTEL 0x94FC
+#define GL_PERFQUERY_QUERY_NAME_LENGTH_MAX_INTEL 0x94FD
+#define GL_PERFQUERY_COUNTER_NAME_LENGTH_MAX_INTEL 0x94FE
+#define GL_PERFQUERY_COUNTER_DESC_LENGTH_MAX_INTEL 0x94FF
+#define GL_PERFQUERY_GPA_EXTENDED_COUNTERS_INTEL 0x9500
+typedef void (APIENTRYP PFNGLBEGINPERFQUERYINTELPROC) (GLuint queryHandle);
+typedef void (APIENTRYP PFNGLCREATEPERFQUERYINTELPROC) (GLuint queryId, GLuint *queryHandle);
+typedef void (APIENTRYP PFNGLDELETEPERFQUERYINTELPROC) (GLuint queryHandle);
+typedef void (APIENTRYP PFNGLENDPERFQUERYINTELPROC) (GLuint queryHandle);
+typedef void (APIENTRYP PFNGLGETFIRSTPERFQUERYIDINTELPROC) (GLuint *queryId);
+typedef void (APIENTRYP PFNGLGETNEXTPERFQUERYIDINTELPROC) (GLuint queryId, GLuint *nextQueryId);
+typedef void (APIENTRYP PFNGLGETPERFCOUNTERINFOINTELPROC) (GLuint queryId, GLuint counterId, GLuint counterNameLength, GLchar *counterName, GLuint counterDescLength, GLchar *counterDesc, GLuint *counterOffset, GLuint *counterDataSize, GLuint *counterTypeEnum, GLuint *counterDataTypeEnum, GLuint64 *rawCounterMaxValue);
+typedef void (APIENTRYP PFNGLGETPERFQUERYDATAINTELPROC) (GLuint queryHandle, GLuint flags, GLsizei dataSize, GLvoid *data, GLuint *bytesWritten);
+typedef void (APIENTRYP PFNGLGETPERFQUERYIDBYNAMEINTELPROC) (GLchar *queryName, GLuint *queryId);
+typedef void (APIENTRYP PFNGLGETPERFQUERYINFOINTELPROC) (GLuint queryId, GLuint queryNameLength, GLchar *queryName, GLuint *dataSize, GLuint *noCounters, GLuint *noInstances, GLuint *capsMask);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBeginPerfQueryINTEL (GLuint queryHandle);
+GLAPI void APIENTRY glCreatePerfQueryINTEL (GLuint queryId, GLuint *queryHandle);
+GLAPI void APIENTRY glDeletePerfQueryINTEL (GLuint queryHandle);
+GLAPI void APIENTRY glEndPerfQueryINTEL (GLuint queryHandle);
+GLAPI void APIENTRY glGetFirstPerfQueryIdINTEL (GLuint *queryId);
+GLAPI void APIENTRY glGetNextPerfQueryIdINTEL (GLuint queryId, GLuint *nextQueryId);
+GLAPI void APIENTRY glGetPerfCounterInfoINTEL (GLuint queryId, GLuint counterId, GLuint counterNameLength, GLchar *counterName, GLuint counterDescLength, GLchar *counterDesc, GLuint *counterOffset, GLuint *counterDataSize, GLuint *counterTypeEnum, GLuint *counterDataTypeEnum, GLuint64 *rawCounterMaxValue);
+GLAPI void APIENTRY glGetPerfQueryDataINTEL (GLuint queryHandle, GLuint flags, GLsizei dataSize, GLvoid *data, GLuint *bytesWritten);
+GLAPI void APIENTRY glGetPerfQueryIdByNameINTEL (GLchar *queryName, GLuint *queryId);
+GLAPI void APIENTRY glGetPerfQueryInfoINTEL (GLuint queryId, GLuint queryNameLength, GLchar *queryName, GLuint *dataSize, GLuint *noCounters, GLuint *noInstances, GLuint *capsMask);
+#endif
+#endif /* GL_INTEL_performance_query */
+
+#ifndef GL_MESAX_texture_stack
+#define GL_MESAX_texture_stack 1
+#define GL_TEXTURE_1D_STACK_MESAX         0x8759
+#define GL_TEXTURE_2D_STACK_MESAX         0x875A
+#define GL_PROXY_TEXTURE_1D_STACK_MESAX   0x875B
+#define GL_PROXY_TEXTURE_2D_STACK_MESAX   0x875C
+#define GL_TEXTURE_1D_STACK_BINDING_MESAX 0x875D
+#define GL_TEXTURE_2D_STACK_BINDING_MESAX 0x875E
+#endif /* GL_MESAX_texture_stack */
+
+#ifndef GL_MESA_pack_invert
+#define GL_MESA_pack_invert 1
+#define GL_PACK_INVERT_MESA               0x8758
+#endif /* GL_MESA_pack_invert */
+
+#ifndef GL_MESA_resize_buffers
+#define GL_MESA_resize_buffers 1
+typedef void (APIENTRYP PFNGLRESIZEBUFFERSMESAPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glResizeBuffersMESA (void);
 #endif
+#endif /* GL_MESA_resize_buffers */
 
-#ifndef GL_APPLE_vertex_program_evaluators
-#define GL_VERTEX_ATTRIB_MAP1_APPLE       0x8A00
-#define GL_VERTEX_ATTRIB_MAP2_APPLE       0x8A01
-#define GL_VERTEX_ATTRIB_MAP1_SIZE_APPLE  0x8A02
-#define GL_VERTEX_ATTRIB_MAP1_COEFF_APPLE 0x8A03
-#define GL_VERTEX_ATTRIB_MAP1_ORDER_APPLE 0x8A04
-#define GL_VERTEX_ATTRIB_MAP1_DOMAIN_APPLE 0x8A05
-#define GL_VERTEX_ATTRIB_MAP2_SIZE_APPLE  0x8A06
-#define GL_VERTEX_ATTRIB_MAP2_COEFF_APPLE 0x8A07
-#define GL_VERTEX_ATTRIB_MAP2_ORDER_APPLE 0x8A08
-#define GL_VERTEX_ATTRIB_MAP2_DOMAIN_APPLE 0x8A09
+#ifndef GL_MESA_window_pos
+#define GL_MESA_window_pos 1
+typedef void (APIENTRYP PFNGLWINDOWPOS2DMESAPROC) (GLdouble x, GLdouble y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2DVMESAPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2FMESAPROC) (GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2FVMESAPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2IMESAPROC) (GLint x, GLint y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2IVMESAPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS2SMESAPROC) (GLshort x, GLshort y);
+typedef void (APIENTRYP PFNGLWINDOWPOS2SVMESAPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3DMESAPROC) (GLdouble x, GLdouble y, GLdouble z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3DVMESAPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3FMESAPROC) (GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3FVMESAPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3IMESAPROC) (GLint x, GLint y, GLint z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3IVMESAPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS3SMESAPROC) (GLshort x, GLshort y, GLshort z);
+typedef void (APIENTRYP PFNGLWINDOWPOS3SVMESAPROC) (const GLshort *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS4DMESAPROC) (GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLWINDOWPOS4DVMESAPROC) (const GLdouble *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS4FMESAPROC) (GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLWINDOWPOS4FVMESAPROC) (const GLfloat *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS4IMESAPROC) (GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLWINDOWPOS4IVMESAPROC) (const GLint *v);
+typedef void (APIENTRYP PFNGLWINDOWPOS4SMESAPROC) (GLshort x, GLshort y, GLshort z, GLshort w);
+typedef void (APIENTRYP PFNGLWINDOWPOS4SVMESAPROC) (const GLshort *v);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glWindowPos2dMESA (GLdouble x, GLdouble y);
+GLAPI void APIENTRY glWindowPos2dvMESA (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos2fMESA (GLfloat x, GLfloat y);
+GLAPI void APIENTRY glWindowPos2fvMESA (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos2iMESA (GLint x, GLint y);
+GLAPI void APIENTRY glWindowPos2ivMESA (const GLint *v);
+GLAPI void APIENTRY glWindowPos2sMESA (GLshort x, GLshort y);
+GLAPI void APIENTRY glWindowPos2svMESA (const GLshort *v);
+GLAPI void APIENTRY glWindowPos3dMESA (GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glWindowPos3dvMESA (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos3fMESA (GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glWindowPos3fvMESA (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos3iMESA (GLint x, GLint y, GLint z);
+GLAPI void APIENTRY glWindowPos3ivMESA (const GLint *v);
+GLAPI void APIENTRY glWindowPos3sMESA (GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glWindowPos3svMESA (const GLshort *v);
+GLAPI void APIENTRY glWindowPos4dMESA (GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glWindowPos4dvMESA (const GLdouble *v);
+GLAPI void APIENTRY glWindowPos4fMESA (GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glWindowPos4fvMESA (const GLfloat *v);
+GLAPI void APIENTRY glWindowPos4iMESA (GLint x, GLint y, GLint z, GLint w);
+GLAPI void APIENTRY glWindowPos4ivMESA (const GLint *v);
+GLAPI void APIENTRY glWindowPos4sMESA (GLshort x, GLshort y, GLshort z, GLshort w);
+GLAPI void APIENTRY glWindowPos4svMESA (const GLshort *v);
 #endif
+#endif /* GL_MESA_window_pos */
 
-#ifndef GL_APPLE_aux_depth_stencil
-#define GL_AUX_DEPTH_STENCIL_APPLE        0x8A14
+#ifndef GL_MESA_ycbcr_texture
+#define GL_MESA_ycbcr_texture 1
+#define GL_UNSIGNED_SHORT_8_8_MESA        0x85BA
+#define GL_UNSIGNED_SHORT_8_8_REV_MESA    0x85BB
+#define GL_YCBCR_MESA                     0x8757
+#endif /* GL_MESA_ycbcr_texture */
+
+#ifndef GL_NVX_conditional_render
+#define GL_NVX_conditional_render 1
+typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERNVXPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERNVXPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBeginConditionalRenderNVX (GLuint id);
+GLAPI void APIENTRY glEndConditionalRenderNVX (void);
 #endif
+#endif /* GL_NVX_conditional_render */
 
-#ifndef GL_APPLE_object_purgeable
-#define GL_BUFFER_OBJECT_APPLE            0x85B3
-#define GL_RELEASED_APPLE                 0x8A19
-#define GL_VOLATILE_APPLE                 0x8A1A
-#define GL_RETAINED_APPLE                 0x8A1B
-#define GL_UNDEFINED_APPLE                0x8A1C
-#define GL_PURGEABLE_APPLE                0x8A1D
+#ifndef GL_NVX_gpu_memory_info
+#define GL_NVX_gpu_memory_info 1
+#define GL_GPU_MEMORY_INFO_DEDICATED_VIDMEM_NVX 0x9047
+#define GL_GPU_MEMORY_INFO_TOTAL_AVAILABLE_MEMORY_NVX 0x9048
+#define GL_GPU_MEMORY_INFO_CURRENT_AVAILABLE_VIDMEM_NVX 0x9049
+#define GL_GPU_MEMORY_INFO_EVICTION_COUNT_NVX 0x904A
+#define GL_GPU_MEMORY_INFO_EVICTED_MEMORY_NVX 0x904B
+#endif /* GL_NVX_gpu_memory_info */
+
+#ifndef GL_NV_bindless_multi_draw_indirect
+#define GL_NV_bindless_multi_draw_indirect 1
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTBINDLESSNVPROC) (GLenum mode, const void *indirect, GLsizei drawCount, GLsizei stride, GLint vertexBufferCount);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTBINDLESSNVPROC) (GLenum mode, GLenum type, const void *indirect, GLsizei drawCount, GLsizei stride, GLint vertexBufferCount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiDrawArraysIndirectBindlessNV (GLenum mode, const void *indirect, GLsizei drawCount, GLsizei stride, GLint vertexBufferCount);
+GLAPI void APIENTRY glMultiDrawElementsIndirectBindlessNV (GLenum mode, GLenum type, const void *indirect, GLsizei drawCount, GLsizei stride, GLint vertexBufferCount);
 #endif
+#endif /* GL_NV_bindless_multi_draw_indirect */
 
-#ifndef GL_APPLE_row_bytes
-#define GL_PACK_ROW_BYTES_APPLE           0x8A15
-#define GL_UNPACK_ROW_BYTES_APPLE         0x8A16
+#ifndef GL_NV_bindless_multi_draw_indirect_count
+#define GL_NV_bindless_multi_draw_indirect_count 1
+typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTBINDLESSCOUNTNVPROC) (GLenum mode, const void *indirect, GLsizei drawCount, GLsizei maxDrawCount, GLsizei stride, GLint vertexBufferCount);
+typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTBINDLESSCOUNTNVPROC) (GLenum mode, GLenum type, const void *indirect, GLsizei drawCount, GLsizei maxDrawCount, GLsizei stride, GLint vertexBufferCount);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMultiDrawArraysIndirectBindlessCountNV (GLenum mode, const void *indirect, GLsizei drawCount, GLsizei maxDrawCount, GLsizei stride, GLint vertexBufferCount);
+GLAPI void APIENTRY glMultiDrawElementsIndirectBindlessCountNV (GLenum mode, GLenum type, const void *indirect, GLsizei drawCount, GLsizei maxDrawCount, GLsizei stride, GLint vertexBufferCount);
 #endif
+#endif /* GL_NV_bindless_multi_draw_indirect_count */
 
-#ifndef GL_APPLE_rgb_422
-#define GL_RGB_422_APPLE                  0x8A1F
-/* reuse GL_UNSIGNED_SHORT_8_8_APPLE */
-/* reuse GL_UNSIGNED_SHORT_8_8_REV_APPLE */
+#ifndef GL_NV_bindless_texture
+#define GL_NV_bindless_texture 1
+typedef GLuint64 (APIENTRYP PFNGLGETTEXTUREHANDLENVPROC) (GLuint texture);
+typedef GLuint64 (APIENTRYP PFNGLGETTEXTURESAMPLERHANDLENVPROC) (GLuint texture, GLuint sampler);
+typedef void (APIENTRYP PFNGLMAKETEXTUREHANDLERESIDENTNVPROC) (GLuint64 handle);
+typedef void (APIENTRYP PFNGLMAKETEXTUREHANDLENONRESIDENTNVPROC) (GLuint64 handle);
+typedef GLuint64 (APIENTRYP PFNGLGETIMAGEHANDLENVPROC) (GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum format);
+typedef void (APIENTRYP PFNGLMAKEIMAGEHANDLERESIDENTNVPROC) (GLuint64 handle, GLenum access);
+typedef void (APIENTRYP PFNGLMAKEIMAGEHANDLENONRESIDENTNVPROC) (GLuint64 handle);
+typedef void (APIENTRYP PFNGLUNIFORMHANDLEUI64NVPROC) (GLint location, GLuint64 value);
+typedef void (APIENTRYP PFNGLUNIFORMHANDLEUI64VNVPROC) (GLint location, GLsizei count, const GLuint64 *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMHANDLEUI64NVPROC) (GLuint program, GLint location, GLuint64 value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMHANDLEUI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64 *values);
+typedef GLboolean (APIENTRYP PFNGLISTEXTUREHANDLERESIDENTNVPROC) (GLuint64 handle);
+typedef GLboolean (APIENTRYP PFNGLISIMAGEHANDLERESIDENTNVPROC) (GLuint64 handle);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI GLuint64 APIENTRY glGetTextureHandleNV (GLuint texture);
+GLAPI GLuint64 APIENTRY glGetTextureSamplerHandleNV (GLuint texture, GLuint sampler);
+GLAPI void APIENTRY glMakeTextureHandleResidentNV (GLuint64 handle);
+GLAPI void APIENTRY glMakeTextureHandleNonResidentNV (GLuint64 handle);
+GLAPI GLuint64 APIENTRY glGetImageHandleNV (GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum format);
+GLAPI void APIENTRY glMakeImageHandleResidentNV (GLuint64 handle, GLenum access);
+GLAPI void APIENTRY glMakeImageHandleNonResidentNV (GLuint64 handle);
+GLAPI void APIENTRY glUniformHandleui64NV (GLint location, GLuint64 value);
+GLAPI void APIENTRY glUniformHandleui64vNV (GLint location, GLsizei count, const GLuint64 *value);
+GLAPI void APIENTRY glProgramUniformHandleui64NV (GLuint program, GLint location, GLuint64 value);
+GLAPI void APIENTRY glProgramUniformHandleui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64 *values);
+GLAPI GLboolean APIENTRY glIsTextureHandleResidentNV (GLuint64 handle);
+GLAPI GLboolean APIENTRY glIsImageHandleResidentNV (GLuint64 handle);
 #endif
+#endif /* GL_NV_bindless_texture */
+
+#ifndef GL_NV_blend_equation_advanced
+#define GL_NV_blend_equation_advanced 1
+#define GL_BLEND_OVERLAP_NV               0x9281
+#define GL_BLEND_PREMULTIPLIED_SRC_NV     0x9280
+#define GL_BLUE_NV                        0x1905
+#define GL_COLORBURN_NV                   0x929A
+#define GL_COLORDODGE_NV                  0x9299
+#define GL_CONJOINT_NV                    0x9284
+#define GL_CONTRAST_NV                    0x92A1
+#define GL_DARKEN_NV                      0x9297
+#define GL_DIFFERENCE_NV                  0x929E
+#define GL_DISJOINT_NV                    0x9283
+#define GL_DST_ATOP_NV                    0x928F
+#define GL_DST_IN_NV                      0x928B
+#define GL_DST_NV                         0x9287
+#define GL_DST_OUT_NV                     0x928D
+#define GL_DST_OVER_NV                    0x9289
+#define GL_EXCLUSION_NV                   0x92A0
+#define GL_GREEN_NV                       0x1904
+#define GL_HARDLIGHT_NV                   0x929B
+#define GL_HARDMIX_NV                     0x92A9
+#define GL_HSL_COLOR_NV                   0x92AF
+#define GL_HSL_HUE_NV                     0x92AD
+#define GL_HSL_LUMINOSITY_NV              0x92B0
+#define GL_HSL_SATURATION_NV              0x92AE
+#define GL_INVERT_OVG_NV                  0x92B4
+#define GL_INVERT_RGB_NV                  0x92A3
+#define GL_LIGHTEN_NV                     0x9298
+#define GL_LINEARBURN_NV                  0x92A5
+#define GL_LINEARDODGE_NV                 0x92A4
+#define GL_LINEARLIGHT_NV                 0x92A7
+#define GL_MINUS_CLAMPED_NV               0x92B3
+#define GL_MINUS_NV                       0x929F
+#define GL_MULTIPLY_NV                    0x9294
+#define GL_OVERLAY_NV                     0x9296
+#define GL_PINLIGHT_NV                    0x92A8
+#define GL_PLUS_CLAMPED_ALPHA_NV          0x92B2
+#define GL_PLUS_CLAMPED_NV                0x92B1
+#define GL_PLUS_DARKER_NV                 0x9292
+#define GL_PLUS_NV                        0x9291
+#define GL_RED_NV                         0x1903
+#define GL_SCREEN_NV                      0x9295
+#define GL_SOFTLIGHT_NV                   0x929C
+#define GL_SRC_ATOP_NV                    0x928E
+#define GL_SRC_IN_NV                      0x928A
+#define GL_SRC_NV                         0x9286
+#define GL_SRC_OUT_NV                     0x928C
+#define GL_SRC_OVER_NV                    0x9288
+#define GL_UNCORRELATED_NV                0x9282
+#define GL_VIVIDLIGHT_NV                  0x92A6
+#define GL_XOR_NV                         0x1506
+typedef void (APIENTRYP PFNGLBLENDPARAMETERINVPROC) (GLenum pname, GLint value);
+typedef void (APIENTRYP PFNGLBLENDBARRIERNVPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlendParameteriNV (GLenum pname, GLint value);
+GLAPI void APIENTRY glBlendBarrierNV (void);
+#endif
+#endif /* GL_NV_blend_equation_advanced */
+
+#ifndef GL_NV_blend_equation_advanced_coherent
+#define GL_NV_blend_equation_advanced_coherent 1
+#define GL_BLEND_ADVANCED_COHERENT_NV     0x9285
+#endif /* GL_NV_blend_equation_advanced_coherent */
 
-#ifndef GL_NV_video_capture
-#define GL_VIDEO_BUFFER_NV                0x9020
-#define GL_VIDEO_BUFFER_BINDING_NV        0x9021
-#define GL_FIELD_UPPER_NV                 0x9022
-#define GL_FIELD_LOWER_NV                 0x9023
-#define GL_NUM_VIDEO_CAPTURE_STREAMS_NV   0x9024
-#define GL_NEXT_VIDEO_CAPTURE_BUFFER_STATUS_NV 0x9025
-#define GL_VIDEO_CAPTURE_TO_422_SUPPORTED_NV 0x9026
-#define GL_LAST_VIDEO_CAPTURE_STATUS_NV   0x9027
-#define GL_VIDEO_BUFFER_PITCH_NV          0x9028
-#define GL_VIDEO_COLOR_CONVERSION_MATRIX_NV 0x9029
-#define GL_VIDEO_COLOR_CONVERSION_MAX_NV  0x902A
-#define GL_VIDEO_COLOR_CONVERSION_MIN_NV  0x902B
-#define GL_VIDEO_COLOR_CONVERSION_OFFSET_NV 0x902C
-#define GL_VIDEO_BUFFER_INTERNAL_FORMAT_NV 0x902D
-#define GL_PARTIAL_SUCCESS_NV             0x902E
-#define GL_SUCCESS_NV                     0x902F
-#define GL_FAILURE_NV                     0x9030
-#define GL_YCBYCR8_422_NV                 0x9031
-#define GL_YCBAYCR8A_4224_NV              0x9032
-#define GL_Z6Y10Z6CB10Z6Y10Z6CR10_422_NV  0x9033
-#define GL_Z6Y10Z6CB10Z6A10Z6Y10Z6CR10Z6A10_4224_NV 0x9034
-#define GL_Z4Y12Z4CB12Z4Y12Z4CR12_422_NV  0x9035
-#define GL_Z4Y12Z4CB12Z4A12Z4Y12Z4CR12Z4A12_4224_NV 0x9036
-#define GL_Z4Y12Z4CB12Z4CR12_444_NV       0x9037
-#define GL_VIDEO_CAPTURE_FRAME_WIDTH_NV   0x9038
-#define GL_VIDEO_CAPTURE_FRAME_HEIGHT_NV  0x9039
-#define GL_VIDEO_CAPTURE_FIELD_UPPER_HEIGHT_NV 0x903A
-#define GL_VIDEO_CAPTURE_FIELD_LOWER_HEIGHT_NV 0x903B
-#define GL_VIDEO_CAPTURE_SURFACE_ORIGIN_NV 0x903C
+#ifndef GL_NV_blend_square
+#define GL_NV_blend_square 1
+#endif /* GL_NV_blend_square */
+
+#ifndef GL_NV_compute_program5
+#define GL_NV_compute_program5 1
+#define GL_COMPUTE_PROGRAM_NV             0x90FB
+#define GL_COMPUTE_PROGRAM_PARAMETER_BUFFER_NV 0x90FC
+#endif /* GL_NV_compute_program5 */
+
+#ifndef GL_NV_conditional_render
+#define GL_NV_conditional_render 1
+#define GL_QUERY_WAIT_NV                  0x8E13
+#define GL_QUERY_NO_WAIT_NV               0x8E14
+#define GL_QUERY_BY_REGION_WAIT_NV        0x8E15
+#define GL_QUERY_BY_REGION_NO_WAIT_NV     0x8E16
+typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERNVPROC) (GLuint id, GLenum mode);
+typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERNVPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBeginConditionalRenderNV (GLuint id, GLenum mode);
+GLAPI void APIENTRY glEndConditionalRenderNV (void);
 #endif
+#endif /* GL_NV_conditional_render */
+
+#ifndef GL_NV_copy_depth_to_color
+#define GL_NV_copy_depth_to_color 1
+#define GL_DEPTH_STENCIL_TO_RGBA_NV       0x886E
+#define GL_DEPTH_STENCIL_TO_BGRA_NV       0x886F
+#endif /* GL_NV_copy_depth_to_color */
 
 #ifndef GL_NV_copy_image
+#define GL_NV_copy_image 1
+typedef void (APIENTRYP PFNGLCOPYIMAGESUBDATANVPROC) (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glCopyImageSubDataNV (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth);
 #endif
+#endif /* GL_NV_copy_image */
 
-#ifndef GL_EXT_separate_shader_objects
-#define GL_ACTIVE_PROGRAM_EXT             0x8B8D
-#endif
+#ifndef GL_NV_deep_texture3D
+#define GL_NV_deep_texture3D 1
+#define GL_MAX_DEEP_3D_TEXTURE_WIDTH_HEIGHT_NV 0x90D0
+#define GL_MAX_DEEP_3D_TEXTURE_DEPTH_NV   0x90D1
+#endif /* GL_NV_deep_texture3D */
 
-#ifndef GL_NV_parameter_buffer_object2
+#ifndef GL_NV_depth_buffer_float
+#define GL_NV_depth_buffer_float 1
+#define GL_DEPTH_COMPONENT32F_NV          0x8DAB
+#define GL_DEPTH32F_STENCIL8_NV           0x8DAC
+#define GL_FLOAT_32_UNSIGNED_INT_24_8_REV_NV 0x8DAD
+#define GL_DEPTH_BUFFER_FLOAT_MODE_NV     0x8DAF
+typedef void (APIENTRYP PFNGLDEPTHRANGEDNVPROC) (GLdouble zNear, GLdouble zFar);
+typedef void (APIENTRYP PFNGLCLEARDEPTHDNVPROC) (GLdouble depth);
+typedef void (APIENTRYP PFNGLDEPTHBOUNDSDNVPROC) (GLdouble zmin, GLdouble zmax);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDepthRangedNV (GLdouble zNear, GLdouble zFar);
+GLAPI void APIENTRY glClearDepthdNV (GLdouble depth);
+GLAPI void APIENTRY glDepthBoundsdNV (GLdouble zmin, GLdouble zmax);
 #endif
+#endif /* GL_NV_depth_buffer_float */
 
-#ifndef GL_NV_shader_buffer_load
-#define GL_BUFFER_GPU_ADDRESS_NV          0x8F1D
-#define GL_GPU_ADDRESS_NV                 0x8F34
-#define GL_MAX_SHADER_BUFFER_ADDRESS_NV   0x8F35
+#ifndef GL_NV_depth_clamp
+#define GL_NV_depth_clamp 1
+#define GL_DEPTH_CLAMP_NV                 0x864F
+#endif /* GL_NV_depth_clamp */
+
+#ifndef GL_NV_draw_texture
+#define GL_NV_draw_texture 1
+typedef void (APIENTRYP PFNGLDRAWTEXTURENVPROC) (GLuint texture, GLuint sampler, GLfloat x0, GLfloat y0, GLfloat x1, GLfloat y1, GLfloat z, GLfloat s0, GLfloat t0, GLfloat s1, GLfloat t1);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDrawTextureNV (GLuint texture, GLuint sampler, GLfloat x0, GLfloat y0, GLfloat x1, GLfloat y1, GLfloat z, GLfloat s0, GLfloat t0, GLfloat s1, GLfloat t1);
 #endif
+#endif /* GL_NV_draw_texture */
 
-#ifndef GL_NV_vertex_buffer_unified_memory
-#define GL_VERTEX_ATTRIB_ARRAY_UNIFIED_NV 0x8F1E
-#define GL_ELEMENT_ARRAY_UNIFIED_NV       0x8F1F
-#define GL_VERTEX_ATTRIB_ARRAY_ADDRESS_NV 0x8F20
-#define GL_VERTEX_ARRAY_ADDRESS_NV        0x8F21
-#define GL_NORMAL_ARRAY_ADDRESS_NV        0x8F22
-#define GL_COLOR_ARRAY_ADDRESS_NV         0x8F23
-#define GL_INDEX_ARRAY_ADDRESS_NV         0x8F24
-#define GL_TEXTURE_COORD_ARRAY_ADDRESS_NV 0x8F25
-#define GL_EDGE_FLAG_ARRAY_ADDRESS_NV     0x8F26
-#define GL_SECONDARY_COLOR_ARRAY_ADDRESS_NV 0x8F27
-#define GL_FOG_COORD_ARRAY_ADDRESS_NV     0x8F28
-#define GL_ELEMENT_ARRAY_ADDRESS_NV       0x8F29
-#define GL_VERTEX_ATTRIB_ARRAY_LENGTH_NV  0x8F2A
-#define GL_VERTEX_ARRAY_LENGTH_NV         0x8F2B
-#define GL_NORMAL_ARRAY_LENGTH_NV         0x8F2C
-#define GL_COLOR_ARRAY_LENGTH_NV          0x8F2D
-#define GL_INDEX_ARRAY_LENGTH_NV          0x8F2E
-#define GL_TEXTURE_COORD_ARRAY_LENGTH_NV  0x8F2F
-#define GL_EDGE_FLAG_ARRAY_LENGTH_NV      0x8F30
-#define GL_SECONDARY_COLOR_ARRAY_LENGTH_NV 0x8F31
-#define GL_FOG_COORD_ARRAY_LENGTH_NV      0x8F32
-#define GL_ELEMENT_ARRAY_LENGTH_NV        0x8F33
-#define GL_DRAW_INDIRECT_UNIFIED_NV       0x8F40
-#define GL_DRAW_INDIRECT_ADDRESS_NV       0x8F41
-#define GL_DRAW_INDIRECT_LENGTH_NV        0x8F42
+#ifndef GL_NV_evaluators
+#define GL_NV_evaluators 1
+#define GL_EVAL_2D_NV                     0x86C0
+#define GL_EVAL_TRIANGULAR_2D_NV          0x86C1
+#define GL_MAP_TESSELLATION_NV            0x86C2
+#define GL_MAP_ATTRIB_U_ORDER_NV          0x86C3
+#define GL_MAP_ATTRIB_V_ORDER_NV          0x86C4
+#define GL_EVAL_FRACTIONAL_TESSELLATION_NV 0x86C5
+#define GL_EVAL_VERTEX_ATTRIB0_NV         0x86C6
+#define GL_EVAL_VERTEX_ATTRIB1_NV         0x86C7
+#define GL_EVAL_VERTEX_ATTRIB2_NV         0x86C8
+#define GL_EVAL_VERTEX_ATTRIB3_NV         0x86C9
+#define GL_EVAL_VERTEX_ATTRIB4_NV         0x86CA
+#define GL_EVAL_VERTEX_ATTRIB5_NV         0x86CB
+#define GL_EVAL_VERTEX_ATTRIB6_NV         0x86CC
+#define GL_EVAL_VERTEX_ATTRIB7_NV         0x86CD
+#define GL_EVAL_VERTEX_ATTRIB8_NV         0x86CE
+#define GL_EVAL_VERTEX_ATTRIB9_NV         0x86CF
+#define GL_EVAL_VERTEX_ATTRIB10_NV        0x86D0
+#define GL_EVAL_VERTEX_ATTRIB11_NV        0x86D1
+#define GL_EVAL_VERTEX_ATTRIB12_NV        0x86D2
+#define GL_EVAL_VERTEX_ATTRIB13_NV        0x86D3
+#define GL_EVAL_VERTEX_ATTRIB14_NV        0x86D4
+#define GL_EVAL_VERTEX_ATTRIB15_NV        0x86D5
+#define GL_MAX_MAP_TESSELLATION_NV        0x86D6
+#define GL_MAX_RATIONAL_EVAL_ORDER_NV     0x86D7
+typedef void (APIENTRYP PFNGLMAPCONTROLPOINTSNVPROC) (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLint uorder, GLint vorder, GLboolean packed, const void *points);
+typedef void (APIENTRYP PFNGLMAPPARAMETERIVNVPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLMAPPARAMETERFVNVPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMAPCONTROLPOINTSNVPROC) (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLboolean packed, void *points);
+typedef void (APIENTRYP PFNGLGETMAPPARAMETERIVNVPROC) (GLenum target, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMAPPARAMETERFVNVPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETMAPATTRIBPARAMETERIVNVPROC) (GLenum target, GLuint index, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETMAPATTRIBPARAMETERFVNVPROC) (GLenum target, GLuint index, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLEVALMAPSNVPROC) (GLenum target, GLenum mode);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glMapControlPointsNV (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLint uorder, GLint vorder, GLboolean packed, const void *points);
+GLAPI void APIENTRY glMapParameterivNV (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glMapParameterfvNV (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glGetMapControlPointsNV (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLboolean packed, void *points);
+GLAPI void APIENTRY glGetMapParameterivNV (GLenum target, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMapParameterfvNV (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetMapAttribParameterivNV (GLenum target, GLuint index, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetMapAttribParameterfvNV (GLenum target, GLuint index, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glEvalMapsNV (GLenum target, GLenum mode);
 #endif
+#endif /* GL_NV_evaluators */
 
-#ifndef GL_NV_texture_barrier
+#ifndef GL_NV_explicit_multisample
+#define GL_NV_explicit_multisample 1
+#define GL_SAMPLE_POSITION_NV             0x8E50
+#define GL_SAMPLE_MASK_NV                 0x8E51
+#define GL_SAMPLE_MASK_VALUE_NV           0x8E52
+#define GL_TEXTURE_BINDING_RENDERBUFFER_NV 0x8E53
+#define GL_TEXTURE_RENDERBUFFER_DATA_STORE_BINDING_NV 0x8E54
+#define GL_TEXTURE_RENDERBUFFER_NV        0x8E55
+#define GL_SAMPLER_RENDERBUFFER_NV        0x8E56
+#define GL_INT_SAMPLER_RENDERBUFFER_NV    0x8E57
+#define GL_UNSIGNED_INT_SAMPLER_RENDERBUFFER_NV 0x8E58
+#define GL_MAX_SAMPLE_MASK_WORDS_NV       0x8E59
+typedef void (APIENTRYP PFNGLGETMULTISAMPLEFVNVPROC) (GLenum pname, GLuint index, GLfloat *val);
+typedef void (APIENTRYP PFNGLSAMPLEMASKINDEXEDNVPROC) (GLuint index, GLbitfield mask);
+typedef void (APIENTRYP PFNGLTEXRENDERBUFFERNVPROC) (GLenum target, GLuint renderbuffer);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGetMultisamplefvNV (GLenum pname, GLuint index, GLfloat *val);
+GLAPI void APIENTRY glSampleMaskIndexedNV (GLuint index, GLbitfield mask);
+GLAPI void APIENTRY glTexRenderbufferNV (GLenum target, GLuint renderbuffer);
 #endif
+#endif /* GL_NV_explicit_multisample */
 
-#ifndef GL_AMD_shader_stencil_export
+#ifndef GL_NV_fence
+#define GL_NV_fence 1
+#define GL_ALL_COMPLETED_NV               0x84F2
+#define GL_FENCE_STATUS_NV                0x84F3
+#define GL_FENCE_CONDITION_NV             0x84F4
+typedef void (APIENTRYP PFNGLDELETEFENCESNVPROC) (GLsizei n, const GLuint *fences);
+typedef void (APIENTRYP PFNGLGENFENCESNVPROC) (GLsizei n, GLuint *fences);
+typedef GLboolean (APIENTRYP PFNGLISFENCENVPROC) (GLuint fence);
+typedef GLboolean (APIENTRYP PFNGLTESTFENCENVPROC) (GLuint fence);
+typedef void (APIENTRYP PFNGLGETFENCEIVNVPROC) (GLuint fence, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLFINISHFENCENVPROC) (GLuint fence);
+typedef void (APIENTRYP PFNGLSETFENCENVPROC) (GLuint fence, GLenum condition);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glDeleteFencesNV (GLsizei n, const GLuint *fences);
+GLAPI void APIENTRY glGenFencesNV (GLsizei n, GLuint *fences);
+GLAPI GLboolean APIENTRY glIsFenceNV (GLuint fence);
+GLAPI GLboolean APIENTRY glTestFenceNV (GLuint fence);
+GLAPI void APIENTRY glGetFenceivNV (GLuint fence, GLenum pname, GLint *params);
+GLAPI void APIENTRY glFinishFenceNV (GLuint fence);
+GLAPI void APIENTRY glSetFenceNV (GLuint fence, GLenum condition);
 #endif
+#endif /* GL_NV_fence */
 
-#ifndef GL_AMD_seamless_cubemap_per_texture
-/* reuse GL_TEXTURE_CUBE_MAP_SEAMLESS */
+#ifndef GL_NV_float_buffer
+#define GL_NV_float_buffer 1
+#define GL_FLOAT_R_NV                     0x8880
+#define GL_FLOAT_RG_NV                    0x8881
+#define GL_FLOAT_RGB_NV                   0x8882
+#define GL_FLOAT_RGBA_NV                  0x8883
+#define GL_FLOAT_R16_NV                   0x8884
+#define GL_FLOAT_R32_NV                   0x8885
+#define GL_FLOAT_RG16_NV                  0x8886
+#define GL_FLOAT_RG32_NV                  0x8887
+#define GL_FLOAT_RGB16_NV                 0x8888
+#define GL_FLOAT_RGB32_NV                 0x8889
+#define GL_FLOAT_RGBA16_NV                0x888A
+#define GL_FLOAT_RGBA32_NV                0x888B
+#define GL_TEXTURE_FLOAT_COMPONENTS_NV    0x888C
+#define GL_FLOAT_CLEAR_COLOR_VALUE_NV     0x888D
+#define GL_FLOAT_RGBA_MODE_NV             0x888E
+#endif /* GL_NV_float_buffer */
+
+#ifndef GL_NV_fog_distance
+#define GL_NV_fog_distance 1
+#define GL_FOG_DISTANCE_MODE_NV           0x855A
+#define GL_EYE_RADIAL_NV                  0x855B
+#define GL_EYE_PLANE_ABSOLUTE_NV          0x855C
+#endif /* GL_NV_fog_distance */
+
+#ifndef GL_NV_fragment_program
+#define GL_NV_fragment_program 1
+#define GL_MAX_FRAGMENT_PROGRAM_LOCAL_PARAMETERS_NV 0x8868
+#define GL_FRAGMENT_PROGRAM_NV            0x8870
+#define GL_MAX_TEXTURE_COORDS_NV          0x8871
+#define GL_MAX_TEXTURE_IMAGE_UNITS_NV     0x8872
+#define GL_FRAGMENT_PROGRAM_BINDING_NV    0x8873
+#define GL_PROGRAM_ERROR_STRING_NV        0x8874
+typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4FNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4FVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, const GLfloat *v);
+typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4DNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4DVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, const GLdouble *v);
+typedef void (APIENTRYP PFNGLGETPROGRAMNAMEDPARAMETERFVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMNAMEDPARAMETERDVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLdouble *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramNamedParameter4fNV (GLuint id, GLsizei len, const GLubyte *name, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glProgramNamedParameter4fvNV (GLuint id, GLsizei len, const GLubyte *name, const GLfloat *v);
+GLAPI void APIENTRY glProgramNamedParameter4dNV (GLuint id, GLsizei len, const GLubyte *name, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glProgramNamedParameter4dvNV (GLuint id, GLsizei len, const GLubyte *name, const GLdouble *v);
+GLAPI void APIENTRY glGetProgramNamedParameterfvNV (GLuint id, GLsizei len, const GLubyte *name, GLfloat *params);
+GLAPI void APIENTRY glGetProgramNamedParameterdvNV (GLuint id, GLsizei len, const GLubyte *name, GLdouble *params);
 #endif
+#endif /* GL_NV_fragment_program */
 
-#ifndef GL_AMD_conservative_depth
+#ifndef GL_NV_fragment_program2
+#define GL_NV_fragment_program2 1
+#define GL_MAX_PROGRAM_EXEC_INSTRUCTIONS_NV 0x88F4
+#define GL_MAX_PROGRAM_CALL_DEPTH_NV      0x88F5
+#define GL_MAX_PROGRAM_IF_DEPTH_NV        0x88F6
+#define GL_MAX_PROGRAM_LOOP_DEPTH_NV      0x88F7
+#define GL_MAX_PROGRAM_LOOP_COUNT_NV      0x88F8
+#endif /* GL_NV_fragment_program2 */
+
+#ifndef GL_NV_fragment_program4
+#define GL_NV_fragment_program4 1
+#endif /* GL_NV_fragment_program4 */
+
+#ifndef GL_NV_fragment_program_option
+#define GL_NV_fragment_program_option 1
+#endif /* GL_NV_fragment_program_option */
+
+#ifndef GL_NV_framebuffer_multisample_coverage
+#define GL_NV_framebuffer_multisample_coverage 1
+#define GL_RENDERBUFFER_COVERAGE_SAMPLES_NV 0x8CAB
+#define GL_RENDERBUFFER_COLOR_SAMPLES_NV  0x8E10
+#define GL_MAX_MULTISAMPLE_COVERAGE_MODES_NV 0x8E11
+#define GL_MULTISAMPLE_COVERAGE_MODES_NV  0x8E12
+typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glRenderbufferStorageMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
 #endif
+#endif /* GL_NV_framebuffer_multisample_coverage */
 
-#ifndef GL_EXT_shader_image_load_store
-#define GL_MAX_IMAGE_UNITS_EXT            0x8F38
-#define GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS_EXT 0x8F39
-#define GL_IMAGE_BINDING_NAME_EXT         0x8F3A
-#define GL_IMAGE_BINDING_LEVEL_EXT        0x8F3B
-#define GL_IMAGE_BINDING_LAYERED_EXT      0x8F3C
-#define GL_IMAGE_BINDING_LAYER_EXT        0x8F3D
-#define GL_IMAGE_BINDING_ACCESS_EXT       0x8F3E
-#define GL_IMAGE_1D_EXT                   0x904C
-#define GL_IMAGE_2D_EXT                   0x904D
-#define GL_IMAGE_3D_EXT                   0x904E
-#define GL_IMAGE_2D_RECT_EXT              0x904F
-#define GL_IMAGE_CUBE_EXT                 0x9050
-#define GL_IMAGE_BUFFER_EXT               0x9051
-#define GL_IMAGE_1D_ARRAY_EXT             0x9052
-#define GL_IMAGE_2D_ARRAY_EXT             0x9053
-#define GL_IMAGE_CUBE_MAP_ARRAY_EXT       0x9054
-#define GL_IMAGE_2D_MULTISAMPLE_EXT       0x9055
-#define GL_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x9056
-#define GL_INT_IMAGE_1D_EXT               0x9057
-#define GL_INT_IMAGE_2D_EXT               0x9058
-#define GL_INT_IMAGE_3D_EXT               0x9059
-#define GL_INT_IMAGE_2D_RECT_EXT          0x905A
-#define GL_INT_IMAGE_CUBE_EXT             0x905B
-#define GL_INT_IMAGE_BUFFER_EXT           0x905C
-#define GL_INT_IMAGE_1D_ARRAY_EXT         0x905D
-#define GL_INT_IMAGE_2D_ARRAY_EXT         0x905E
-#define GL_INT_IMAGE_CUBE_MAP_ARRAY_EXT   0x905F
-#define GL_INT_IMAGE_2D_MULTISAMPLE_EXT   0x9060
-#define GL_INT_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x9061
-#define GL_UNSIGNED_INT_IMAGE_1D_EXT      0x9062
-#define GL_UNSIGNED_INT_IMAGE_2D_EXT      0x9063
-#define GL_UNSIGNED_INT_IMAGE_3D_EXT      0x9064
-#define GL_UNSIGNED_INT_IMAGE_2D_RECT_EXT 0x9065
-#define GL_UNSIGNED_INT_IMAGE_CUBE_EXT    0x9066
-#define GL_UNSIGNED_INT_IMAGE_BUFFER_EXT  0x9067
-#define GL_UNSIGNED_INT_IMAGE_1D_ARRAY_EXT 0x9068
-#define GL_UNSIGNED_INT_IMAGE_2D_ARRAY_EXT 0x9069
-#define GL_UNSIGNED_INT_IMAGE_CUBE_MAP_ARRAY_EXT 0x906A
-#define GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_EXT 0x906B
-#define GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x906C
-#define GL_MAX_IMAGE_SAMPLES_EXT          0x906D
-#define GL_IMAGE_BINDING_FORMAT_EXT       0x906E
-#define GL_VERTEX_ATTRIB_ARRAY_BARRIER_BIT_EXT 0x00000001
-#define GL_ELEMENT_ARRAY_BARRIER_BIT_EXT  0x00000002
-#define GL_UNIFORM_BARRIER_BIT_EXT        0x00000004
-#define GL_TEXTURE_FETCH_BARRIER_BIT_EXT  0x00000008
-#define GL_SHADER_IMAGE_ACCESS_BARRIER_BIT_EXT 0x00000020
-#define GL_COMMAND_BARRIER_BIT_EXT        0x00000040
-#define GL_PIXEL_BUFFER_BARRIER_BIT_EXT   0x00000080
-#define GL_TEXTURE_UPDATE_BARRIER_BIT_EXT 0x00000100
-#define GL_BUFFER_UPDATE_BARRIER_BIT_EXT  0x00000200
-#define GL_FRAMEBUFFER_BARRIER_BIT_EXT    0x00000400
-#define GL_TRANSFORM_FEEDBACK_BARRIER_BIT_EXT 0x00000800
-#define GL_ATOMIC_COUNTER_BARRIER_BIT_EXT 0x00001000
-#define GL_ALL_BARRIER_BITS_EXT           0xFFFFFFFF
+#ifndef GL_NV_geometry_program4
+#define GL_NV_geometry_program4 1
+#define GL_GEOMETRY_PROGRAM_NV            0x8C26
+#define GL_MAX_PROGRAM_OUTPUT_VERTICES_NV 0x8C27
+#define GL_MAX_PROGRAM_TOTAL_OUTPUT_COMPONENTS_NV 0x8C28
+typedef void (APIENTRYP PFNGLPROGRAMVERTEXLIMITNVPROC) (GLenum target, GLint limit);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
+typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREFACEEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramVertexLimitNV (GLenum target, GLint limit);
+GLAPI void APIENTRY glFramebufferTextureEXT (GLenum target, GLenum attachment, GLuint texture, GLint level);
+GLAPI void APIENTRY glFramebufferTextureFaceEXT (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
 #endif
+#endif /* GL_NV_geometry_program4 */
 
-#ifndef GL_EXT_vertex_attrib_64bit
-/* reuse GL_DOUBLE */
-#define GL_DOUBLE_VEC2_EXT                0x8FFC
-#define GL_DOUBLE_VEC3_EXT                0x8FFD
-#define GL_DOUBLE_VEC4_EXT                0x8FFE
-#define GL_DOUBLE_MAT2_EXT                0x8F46
-#define GL_DOUBLE_MAT3_EXT                0x8F47
-#define GL_DOUBLE_MAT4_EXT                0x8F48
-#define GL_DOUBLE_MAT2x3_EXT              0x8F49
-#define GL_DOUBLE_MAT2x4_EXT              0x8F4A
-#define GL_DOUBLE_MAT3x2_EXT              0x8F4B
-#define GL_DOUBLE_MAT3x4_EXT              0x8F4C
-#define GL_DOUBLE_MAT4x2_EXT              0x8F4D
-#define GL_DOUBLE_MAT4x3_EXT              0x8F4E
+#ifndef GL_NV_geometry_shader4
+#define GL_NV_geometry_shader4 1
+#endif /* GL_NV_geometry_shader4 */
+
+#ifndef GL_NV_gpu_program4
+#define GL_NV_gpu_program4 1
+#define GL_MIN_PROGRAM_TEXEL_OFFSET_NV    0x8904
+#define GL_MAX_PROGRAM_TEXEL_OFFSET_NV    0x8905
+#define GL_PROGRAM_ATTRIB_COMPONENTS_NV   0x8906
+#define GL_PROGRAM_RESULT_COMPONENTS_NV   0x8907
+#define GL_MAX_PROGRAM_ATTRIB_COMPONENTS_NV 0x8908
+#define GL_MAX_PROGRAM_RESULT_COMPONENTS_NV 0x8909
+#define GL_MAX_PROGRAM_GENERIC_ATTRIBS_NV 0x8DA5
+#define GL_MAX_PROGRAM_GENERIC_RESULTS_NV 0x8DA6
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4INVPROC) (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4IVNVPROC) (GLenum target, GLuint index, const GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERSI4IVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4UINVPROC) (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4UIVNVPROC) (GLenum target, GLuint index, const GLuint *params);
+typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERSI4UIVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLuint *params);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4INVPROC) (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4IVNVPROC) (GLenum target, GLuint index, const GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERSI4IVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4UINVPROC) (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4UIVNVPROC) (GLenum target, GLuint index, const GLuint *params);
+typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERSI4UIVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERIIVNVPROC) (GLenum target, GLuint index, GLint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERIUIVNVPROC) (GLenum target, GLuint index, GLuint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERIIVNVPROC) (GLenum target, GLuint index, GLint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERIUIVNVPROC) (GLenum target, GLuint index, GLuint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramLocalParameterI4iNV (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
+GLAPI void APIENTRY glProgramLocalParameterI4ivNV (GLenum target, GLuint index, const GLint *params);
+GLAPI void APIENTRY glProgramLocalParametersI4ivNV (GLenum target, GLuint index, GLsizei count, const GLint *params);
+GLAPI void APIENTRY glProgramLocalParameterI4uiNV (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+GLAPI void APIENTRY glProgramLocalParameterI4uivNV (GLenum target, GLuint index, const GLuint *params);
+GLAPI void APIENTRY glProgramLocalParametersI4uivNV (GLenum target, GLuint index, GLsizei count, const GLuint *params);
+GLAPI void APIENTRY glProgramEnvParameterI4iNV (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
+GLAPI void APIENTRY glProgramEnvParameterI4ivNV (GLenum target, GLuint index, const GLint *params);
+GLAPI void APIENTRY glProgramEnvParametersI4ivNV (GLenum target, GLuint index, GLsizei count, const GLint *params);
+GLAPI void APIENTRY glProgramEnvParameterI4uiNV (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+GLAPI void APIENTRY glProgramEnvParameterI4uivNV (GLenum target, GLuint index, const GLuint *params);
+GLAPI void APIENTRY glProgramEnvParametersI4uivNV (GLenum target, GLuint index, GLsizei count, const GLuint *params);
+GLAPI void APIENTRY glGetProgramLocalParameterIivNV (GLenum target, GLuint index, GLint *params);
+GLAPI void APIENTRY glGetProgramLocalParameterIuivNV (GLenum target, GLuint index, GLuint *params);
+GLAPI void APIENTRY glGetProgramEnvParameterIivNV (GLenum target, GLuint index, GLint *params);
+GLAPI void APIENTRY glGetProgramEnvParameterIuivNV (GLenum target, GLuint index, GLuint *params);
 #endif
+#endif /* GL_NV_gpu_program4 */
 
 #ifndef GL_NV_gpu_program5
+#define GL_NV_gpu_program5 1
 #define GL_MAX_GEOMETRY_PROGRAM_INVOCATIONS_NV 0x8E5A
 #define GL_MIN_FRAGMENT_INTERPOLATION_OFFSET_NV 0x8E5B
 #define GL_MAX_FRAGMENT_INTERPOLATION_OFFSET_NV 0x8E5C
@@ -5861,137 +9214,191 @@ extern "C" {
 #define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET_NV 0x8E5F
 #define GL_MAX_PROGRAM_SUBROUTINE_PARAMETERS_NV 0x8F44
 #define GL_MAX_PROGRAM_SUBROUTINE_NUM_NV  0x8F45
+typedef void (APIENTRYP PFNGLPROGRAMSUBROUTINEPARAMETERSUIVNVPROC) (GLenum target, GLsizei count, const GLuint *params);
+typedef void (APIENTRYP PFNGLGETPROGRAMSUBROUTINEPARAMETERUIVNVPROC) (GLenum target, GLuint index, GLuint *param);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramSubroutineParametersuivNV (GLenum target, GLsizei count, const GLuint *params);
+GLAPI void APIENTRY glGetProgramSubroutineParameteruivNV (GLenum target, GLuint index, GLuint *param);
 #endif
+#endif /* GL_NV_gpu_program5 */
 
-#ifndef GL_NV_gpu_shader5
-#define GL_INT64_NV                       0x140E
-#define GL_UNSIGNED_INT64_NV              0x140F
-#define GL_INT8_NV                        0x8FE0
-#define GL_INT8_VEC2_NV                   0x8FE1
-#define GL_INT8_VEC3_NV                   0x8FE2
-#define GL_INT8_VEC4_NV                   0x8FE3
-#define GL_INT16_NV                       0x8FE4
-#define GL_INT16_VEC2_NV                  0x8FE5
-#define GL_INT16_VEC3_NV                  0x8FE6
-#define GL_INT16_VEC4_NV                  0x8FE7
-#define GL_INT64_VEC2_NV                  0x8FE9
-#define GL_INT64_VEC3_NV                  0x8FEA
-#define GL_INT64_VEC4_NV                  0x8FEB
-#define GL_UNSIGNED_INT8_NV               0x8FEC
-#define GL_UNSIGNED_INT8_VEC2_NV          0x8FED
-#define GL_UNSIGNED_INT8_VEC3_NV          0x8FEE
-#define GL_UNSIGNED_INT8_VEC4_NV          0x8FEF
-#define GL_UNSIGNED_INT16_NV              0x8FF0
-#define GL_UNSIGNED_INT16_VEC2_NV         0x8FF1
-#define GL_UNSIGNED_INT16_VEC3_NV         0x8FF2
-#define GL_UNSIGNED_INT16_VEC4_NV         0x8FF3
-#define GL_UNSIGNED_INT64_VEC2_NV         0x8FF5
-#define GL_UNSIGNED_INT64_VEC3_NV         0x8FF6
-#define GL_UNSIGNED_INT64_VEC4_NV         0x8FF7
-#define GL_FLOAT16_NV                     0x8FF8
-#define GL_FLOAT16_VEC2_NV                0x8FF9
-#define GL_FLOAT16_VEC3_NV                0x8FFA
-#define GL_FLOAT16_VEC4_NV                0x8FFB
-/* reuse GL_PATCHES */
-#endif
+#ifndef GL_NV_gpu_program5_mem_extended
+#define GL_NV_gpu_program5_mem_extended 1
+#endif /* GL_NV_gpu_program5_mem_extended */
 
-#ifndef GL_NV_shader_buffer_store
-#define GL_SHADER_GLOBAL_ACCESS_BARRIER_BIT_NV 0x00000010
-/* reuse GL_READ_WRITE */
-/* reuse GL_WRITE_ONLY */
-#endif
+#ifndef GL_NV_gpu_shader5
+#define GL_NV_gpu_shader5 1
+#endif /* GL_NV_gpu_shader5 */
 
-#ifndef GL_NV_tessellation_program5
-#define GL_MAX_PROGRAM_PATCH_ATTRIBS_NV   0x86D8
-#define GL_TESS_CONTROL_PROGRAM_NV        0x891E
-#define GL_TESS_EVALUATION_PROGRAM_NV     0x891F
-#define GL_TESS_CONTROL_PROGRAM_PARAMETER_BUFFER_NV 0x8C74
-#define GL_TESS_EVALUATION_PROGRAM_PARAMETER_BUFFER_NV 0x8C75
+#ifndef GL_NV_half_float
+#define GL_NV_half_float 1
+typedef unsigned short GLhalfNV;
+#define GL_HALF_FLOAT_NV                  0x140B
+typedef void (APIENTRYP PFNGLVERTEX2HNVPROC) (GLhalfNV x, GLhalfNV y);
+typedef void (APIENTRYP PFNGLVERTEX2HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEX3HNVPROC) (GLhalfNV x, GLhalfNV y, GLhalfNV z);
+typedef void (APIENTRYP PFNGLVERTEX3HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEX4HNVPROC) (GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
+typedef void (APIENTRYP PFNGLVERTEX4HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLNORMAL3HNVPROC) (GLhalfNV nx, GLhalfNV ny, GLhalfNV nz);
+typedef void (APIENTRYP PFNGLNORMAL3HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
+typedef void (APIENTRYP PFNGLCOLOR3HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLCOLOR4HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue, GLhalfNV alpha);
+typedef void (APIENTRYP PFNGLCOLOR4HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLTEXCOORD1HNVPROC) (GLhalfNV s);
+typedef void (APIENTRYP PFNGLTEXCOORD1HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLTEXCOORD2HNVPROC) (GLhalfNV s, GLhalfNV t);
+typedef void (APIENTRYP PFNGLTEXCOORD2HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLTEXCOORD3HNVPROC) (GLhalfNV s, GLhalfNV t, GLhalfNV r);
+typedef void (APIENTRYP PFNGLTEXCOORD3HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLTEXCOORD4HNVPROC) (GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
+typedef void (APIENTRYP PFNGLTEXCOORD4HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1HNVPROC) (GLenum target, GLhalfNV s);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD1HVNVPROC) (GLenum target, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD2HVNVPROC) (GLenum target, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD3HVNVPROC) (GLenum target, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
+typedef void (APIENTRYP PFNGLMULTITEXCOORD4HVNVPROC) (GLenum target, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLFOGCOORDHNVPROC) (GLhalfNV fog);
+typedef void (APIENTRYP PFNGLFOGCOORDHVNVPROC) (const GLhalfNV *fog);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTHNVPROC) (GLhalfNV weight);
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTHVNVPROC) (const GLhalfNV *weight);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1HNVPROC) (GLuint index, GLhalfNV x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB1HVNVPROC) (GLuint index, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB2HVNVPROC) (GLuint index, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB3HVNVPROC) (GLuint index, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIB4HVNVPROC) (GLuint index, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBS1HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBS2HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBS3HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBS4HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glVertex2hNV (GLhalfNV x, GLhalfNV y);
+GLAPI void APIENTRY glVertex2hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glVertex3hNV (GLhalfNV x, GLhalfNV y, GLhalfNV z);
+GLAPI void APIENTRY glVertex3hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glVertex4hNV (GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
+GLAPI void APIENTRY glVertex4hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glNormal3hNV (GLhalfNV nx, GLhalfNV ny, GLhalfNV nz);
+GLAPI void APIENTRY glNormal3hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
+GLAPI void APIENTRY glColor3hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glColor4hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue, GLhalfNV alpha);
+GLAPI void APIENTRY glColor4hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glTexCoord1hNV (GLhalfNV s);
+GLAPI void APIENTRY glTexCoord1hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glTexCoord2hNV (GLhalfNV s, GLhalfNV t);
+GLAPI void APIENTRY glTexCoord2hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glTexCoord3hNV (GLhalfNV s, GLhalfNV t, GLhalfNV r);
+GLAPI void APIENTRY glTexCoord3hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glTexCoord4hNV (GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
+GLAPI void APIENTRY glTexCoord4hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glMultiTexCoord1hNV (GLenum target, GLhalfNV s);
+GLAPI void APIENTRY glMultiTexCoord1hvNV (GLenum target, const GLhalfNV *v);
+GLAPI void APIENTRY glMultiTexCoord2hNV (GLenum target, GLhalfNV s, GLhalfNV t);
+GLAPI void APIENTRY glMultiTexCoord2hvNV (GLenum target, const GLhalfNV *v);
+GLAPI void APIENTRY glMultiTexCoord3hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r);
+GLAPI void APIENTRY glMultiTexCoord3hvNV (GLenum target, const GLhalfNV *v);
+GLAPI void APIENTRY glMultiTexCoord4hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
+GLAPI void APIENTRY glMultiTexCoord4hvNV (GLenum target, const GLhalfNV *v);
+GLAPI void APIENTRY glFogCoordhNV (GLhalfNV fog);
+GLAPI void APIENTRY glFogCoordhvNV (const GLhalfNV *fog);
+GLAPI void APIENTRY glSecondaryColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
+GLAPI void APIENTRY glSecondaryColor3hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glVertexWeighthNV (GLhalfNV weight);
+GLAPI void APIENTRY glVertexWeighthvNV (const GLhalfNV *weight);
+GLAPI void APIENTRY glVertexAttrib1hNV (GLuint index, GLhalfNV x);
+GLAPI void APIENTRY glVertexAttrib1hvNV (GLuint index, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttrib2hNV (GLuint index, GLhalfNV x, GLhalfNV y);
+GLAPI void APIENTRY glVertexAttrib2hvNV (GLuint index, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttrib3hNV (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z);
+GLAPI void APIENTRY glVertexAttrib3hvNV (GLuint index, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttrib4hNV (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
+GLAPI void APIENTRY glVertexAttrib4hvNV (GLuint index, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttribs1hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttribs2hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttribs3hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
+GLAPI void APIENTRY glVertexAttribs4hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
 #endif
+#endif /* GL_NV_half_float */
 
-#ifndef GL_NV_vertex_attrib_integer_64bit
-/* reuse GL_INT64_NV */
-/* reuse GL_UNSIGNED_INT64_NV */
-#endif
+#ifndef GL_NV_light_max_exponent
+#define GL_NV_light_max_exponent 1
+#define GL_MAX_SHININESS_NV               0x8504
+#define GL_MAX_SPOT_EXPONENT_NV           0x8505
+#endif /* GL_NV_light_max_exponent */
 
 #ifndef GL_NV_multisample_coverage
-#define GL_COVERAGE_SAMPLES_NV            0x80A9
+#define GL_NV_multisample_coverage 1
 #define GL_COLOR_SAMPLES_NV               0x8E20
-#endif
-
-#ifndef GL_AMD_name_gen_delete
-#define GL_DATA_BUFFER_AMD                0x9151
-#define GL_PERFORMANCE_MONITOR_AMD        0x9152
-#define GL_QUERY_OBJECT_AMD               0x9153
-#define GL_VERTEX_ARRAY_OBJECT_AMD        0x9154
-#define GL_SAMPLER_OBJECT_AMD             0x9155
-#endif
-
-#ifndef GL_AMD_debug_output
-#define GL_MAX_DEBUG_MESSAGE_LENGTH_AMD   0x9143
-#define GL_MAX_DEBUG_LOGGED_MESSAGES_AMD  0x9144
-#define GL_DEBUG_LOGGED_MESSAGES_AMD      0x9145
-#define GL_DEBUG_SEVERITY_HIGH_AMD        0x9146
-#define GL_DEBUG_SEVERITY_MEDIUM_AMD      0x9147
-#define GL_DEBUG_SEVERITY_LOW_AMD         0x9148
-#define GL_DEBUG_CATEGORY_API_ERROR_AMD   0x9149
-#define GL_DEBUG_CATEGORY_WINDOW_SYSTEM_AMD 0x914A
-#define GL_DEBUG_CATEGORY_DEPRECATION_AMD 0x914B
-#define GL_DEBUG_CATEGORY_UNDEFINED_BEHAVIOR_AMD 0x914C
-#define GL_DEBUG_CATEGORY_PERFORMANCE_AMD 0x914D
-#define GL_DEBUG_CATEGORY_SHADER_COMPILER_AMD 0x914E
-#define GL_DEBUG_CATEGORY_APPLICATION_AMD 0x914F
-#define GL_DEBUG_CATEGORY_OTHER_AMD       0x9150
-#endif
-
-#ifndef GL_NV_vdpau_interop
-#define GL_SURFACE_STATE_NV               0x86EB
-#define GL_SURFACE_REGISTERED_NV          0x86FD
-#define GL_SURFACE_MAPPED_NV              0x8700
-#define GL_WRITE_DISCARD_NV               0x88BE
-#endif
+#endif /* GL_NV_multisample_coverage */
 
-#ifndef GL_AMD_transform_feedback3_lines_triangles
-#endif
-
-#ifndef GL_AMD_depth_clamp_separate
-#define GL_DEPTH_CLAMP_NEAR_AMD           0x901E
-#define GL_DEPTH_CLAMP_FAR_AMD            0x901F
-#endif
-
-#ifndef GL_EXT_texture_sRGB_decode
-#define GL_TEXTURE_SRGB_DECODE_EXT        0x8A48
-#define GL_DECODE_EXT                     0x8A49
-#define GL_SKIP_DECODE_EXT                0x8A4A
-#endif
-
-#ifndef GL_NV_texture_multisample
-#define GL_TEXTURE_COVERAGE_SAMPLES_NV    0x9045
-#define GL_TEXTURE_COLOR_SAMPLES_NV       0x9046
-#endif
-
-#ifndef GL_AMD_blend_minmax_factor
-#define GL_FACTOR_MIN_AMD                 0x901C
-#define GL_FACTOR_MAX_AMD                 0x901D
-#endif
+#ifndef GL_NV_multisample_filter_hint
+#define GL_NV_multisample_filter_hint 1
+#define GL_MULTISAMPLE_FILTER_HINT_NV     0x8534
+#endif /* GL_NV_multisample_filter_hint */
 
-#ifndef GL_AMD_sample_positions
-#define GL_SUBSAMPLE_DISTANCE_AMD         0x883F
+#ifndef GL_NV_occlusion_query
+#define GL_NV_occlusion_query 1
+#define GL_PIXEL_COUNTER_BITS_NV          0x8864
+#define GL_CURRENT_OCCLUSION_QUERY_ID_NV  0x8865
+#define GL_PIXEL_COUNT_NV                 0x8866
+#define GL_PIXEL_COUNT_AVAILABLE_NV       0x8867
+typedef void (APIENTRYP PFNGLGENOCCLUSIONQUERIESNVPROC) (GLsizei n, GLuint *ids);
+typedef void (APIENTRYP PFNGLDELETEOCCLUSIONQUERIESNVPROC) (GLsizei n, const GLuint *ids);
+typedef GLboolean (APIENTRYP PFNGLISOCCLUSIONQUERYNVPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLBEGINOCCLUSIONQUERYNVPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLENDOCCLUSIONQUERYNVPROC) (void);
+typedef void (APIENTRYP PFNGLGETOCCLUSIONQUERYIVNVPROC) (GLuint id, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETOCCLUSIONQUERYUIVNVPROC) (GLuint id, GLenum pname, GLuint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glGenOcclusionQueriesNV (GLsizei n, GLuint *ids);
+GLAPI void APIENTRY glDeleteOcclusionQueriesNV (GLsizei n, const GLuint *ids);
+GLAPI GLboolean APIENTRY glIsOcclusionQueryNV (GLuint id);
+GLAPI void APIENTRY glBeginOcclusionQueryNV (GLuint id);
+GLAPI void APIENTRY glEndOcclusionQueryNV (void);
+GLAPI void APIENTRY glGetOcclusionQueryivNV (GLuint id, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetOcclusionQueryuivNV (GLuint id, GLenum pname, GLuint *params);
 #endif
+#endif /* GL_NV_occlusion_query */
 
-#ifndef GL_EXT_x11_sync_object
-#define GL_SYNC_X11_FENCE_EXT             0x90E1
-#endif
+#ifndef GL_NV_packed_depth_stencil
+#define GL_NV_packed_depth_stencil 1
+#define GL_DEPTH_STENCIL_NV               0x84F9
+#define GL_UNSIGNED_INT_24_8_NV           0x84FA
+#endif /* GL_NV_packed_depth_stencil */
 
-#ifndef GL_AMD_multi_draw_indirect
+#ifndef GL_NV_parameter_buffer_object
+#define GL_NV_parameter_buffer_object 1
+#define GL_MAX_PROGRAM_PARAMETER_BUFFER_BINDINGS_NV 0x8DA0
+#define GL_MAX_PROGRAM_PARAMETER_BUFFER_SIZE_NV 0x8DA1
+#define GL_VERTEX_PROGRAM_PARAMETER_BUFFER_NV 0x8DA2
+#define GL_GEOMETRY_PROGRAM_PARAMETER_BUFFER_NV 0x8DA3
+#define GL_FRAGMENT_PROGRAM_PARAMETER_BUFFER_NV 0x8DA4
+typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSFVNVPROC) (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLfloat *params);
+typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSIIVNVPROC) (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLint *params);
+typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSIUIVNVPROC) (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLuint *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glProgramBufferParametersfvNV (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLfloat *params);
+GLAPI void APIENTRY glProgramBufferParametersIivNV (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLint *params);
+GLAPI void APIENTRY glProgramBufferParametersIuivNV (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLuint *params);
 #endif
+#endif /* GL_NV_parameter_buffer_object */
 
-#ifndef GL_EXT_framebuffer_multisample_blit_scaled
-#define GL_SCALED_RESOLVE_FASTEST_EXT     0x90BA
-#define GL_SCALED_RESOLVE_NICEST_EXT      0x90BB
-#endif
+#ifndef GL_NV_parameter_buffer_object2
+#define GL_NV_parameter_buffer_object2 1
+#endif /* GL_NV_parameter_buffer_object2 */
 
 #ifndef GL_NV_path_rendering
+#define GL_NV_path_rendering 1
 #define GL_PATH_FORMAT_SVG_NV             0x9070
 #define GL_PATH_FORMAT_PS_NV              0x9071
 #define GL_STANDARD_FONT_NAME_NV          0x9072
@@ -6119,3867 +9526,303 @@ extern "C" {
 #define GL_FONT_UNDERLINE_POSITION_BIT_NV 0x04000000
 #define GL_FONT_UNDERLINE_THICKNESS_BIT_NV 0x08000000
 #define GL_FONT_HAS_KERNING_BIT_NV        0x10000000
-/* reuse GL_PRIMARY_COLOR */
-/* reuse GL_PRIMARY_COLOR_NV */
-/* reuse GL_SECONDARY_COLOR_NV */
-#endif
-
-#ifndef GL_AMD_pinned_memory
-#define GL_EXTERNAL_VIRTUAL_MEMORY_BUFFER_AMD 0x9160
-#endif
-
-#ifndef GL_AMD_stencil_operation_extended
-#define GL_SET_AMD                        0x874A
-#define GL_REPLACE_VALUE_AMD              0x874B
-#define GL_STENCIL_OP_VALUE_AMD           0x874C
-#define GL_STENCIL_BACK_OP_VALUE_AMD      0x874D
-#endif
-
-#ifndef GL_AMD_vertex_shader_viewport_index
-#endif
-
-#ifndef GL_AMD_vertex_shader_layer
-#endif
-
-#ifndef GL_NV_bindless_texture
-#endif
-
-#ifndef GL_NV_shader_atomic_float
-#endif
-
-#ifndef GL_AMD_query_buffer_object
-#define GL_QUERY_BUFFER_AMD               0x9192
-#define GL_QUERY_BUFFER_BINDING_AMD       0x9193
-#define GL_QUERY_RESULT_NO_WAIT_AMD       0x9194
-#endif
-
-#ifndef GL_NV_compute_program5
-#define GL_COMPUTE_PROGRAM_NV             0x90FB
-#define GL_COMPUTE_PROGRAM_PARAMETER_BUFFER_NV 0x90FC
-#endif
-
-#ifndef GL_NV_shader_storage_buffer_object
-#endif
-
-#ifndef GL_NV_shader_atomic_counters
-#endif
-
-#ifndef GL_NV_deep_texture3D
-#define GL_MAX_DEEP_3D_TEXTURE_WIDTH_HEIGHT_NV 0x90D0
-#define GL_MAX_DEEP_3D_TEXTURE_DEPTH_NV   0x90D1
-#endif
-
-#ifndef GL_NVX_conditional_render
-#endif
-
-#ifndef GL_AMD_sparse_texture
-#define GL_VIRTUAL_PAGE_SIZE_X_AMD        0x9195
-#define GL_VIRTUAL_PAGE_SIZE_Y_AMD        0x9196
-#define GL_VIRTUAL_PAGE_SIZE_Z_AMD        0x9197
-#define GL_MAX_SPARSE_TEXTURE_SIZE_AMD    0x9198
-#define GL_MAX_SPARSE_3D_TEXTURE_SIZE_AMD 0x9199
-#define GL_MAX_SPARSE_ARRAY_TEXTURE_LAYERS 0x919A
-#define GL_MIN_SPARSE_LEVEL_AMD           0x919B
-#define GL_MIN_LOD_WARNING_AMD            0x919C
-#define GL_TEXTURE_STORAGE_SPARSE_BIT_AMD 0x00000001
-#endif
-
-#ifndef GL_AMD_shader_trinary_minmax
-#endif
-
-#ifndef GL_INTEL_map_texture
-#define GL_TEXTURE_MEMORY_LAYOUT_INTEL    0x83FF
-#define GL_LAYOUT_DEFAULT_INTEL           0
-#define GL_LAYOUT_LINEAR_INTEL            1
-#define GL_LAYOUT_LINEAR_CPU_CACHED_INTEL 2
-#endif
-
-#ifndef GL_NV_draw_texture
-#endif
-
-
-/*************************************************************/
-
-#include <stddef.h>
-#ifndef GL_VERSION_2_0
-/* GL type for program/shader text */
-typedef char GLchar;
-#endif
-
-#ifndef GL_VERSION_1_5
-/* GL types for handling large vertex buffer objects */
-typedef ptrdiff_t GLintptr;
-typedef ptrdiff_t GLsizeiptr;
-#endif
-
-#ifndef GL_ARB_vertex_buffer_object
-/* GL types for handling large vertex buffer objects */
-typedef ptrdiff_t GLintptrARB;
-typedef ptrdiff_t GLsizeiptrARB;
-#endif
-
-#ifndef GL_ARB_shader_objects
-/* GL types for program/shader text and shader object handles */
-typedef char GLcharARB;
-typedef unsigned int GLhandleARB;
-#endif
-
-/* GL type for "half" precision (s10e5) float data in host memory */
-#ifndef GL_ARB_half_float_pixel
-typedef unsigned short GLhalfARB;
-#endif
-
-#ifndef GL_NV_half_float
-typedef unsigned short GLhalfNV;
-#endif
-
-#ifndef GLEXT_64_TYPES_DEFINED
-/* This code block is duplicated in glxext.h, so must be protected */
-#define GLEXT_64_TYPES_DEFINED
-/* Define int32_t, int64_t, and uint64_t types for UST/MSC */
-/* (as used in the GL_EXT_timer_query extension). */
-#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-#include <inttypes.h>
-#elif defined(__sun__) || defined(__digital__)
-#include <inttypes.h>
-#if defined(__STDC__)
-#if defined(__arch64__) || defined(_LP64)
-typedef long int int64_t;
-typedef unsigned long int uint64_t;
-#else
-typedef long long int int64_t;
-typedef unsigned long long int uint64_t;
-#endif /* __arch64__ */
-#endif /* __STDC__ */
-#elif defined( __VMS ) || defined(__sgi)
-#include <inttypes.h>
-#elif defined(__SCO__) || defined(__USLC__)
-#include <stdint.h>
-#elif defined(__UNIXOS2__) || defined(__SOL64__)
-typedef long int int32_t;
-typedef long long int int64_t;
-typedef unsigned long long int uint64_t;
-#elif defined(_WIN32) && defined(__GNUC__)
-#include <stdint.h>
-#elif defined(_WIN32)
-typedef __int32 int32_t;
-typedef __int64 int64_t;
-typedef unsigned __int64 uint64_t;
-#else
-/* Fallback if nothing above works */
-#include <inttypes.h>
-#endif
-#endif
-
-#ifndef GL_EXT_timer_query
-typedef int64_t GLint64EXT;
-typedef uint64_t GLuint64EXT;
-#endif
-
-#ifndef GL_ARB_sync
-typedef int64_t GLint64;
-typedef uint64_t GLuint64;
-typedef struct __GLsync *GLsync;
-#endif
-
-#ifndef GL_ARB_cl_event
-/* These incomplete types let us declare types compatible with OpenCL's cl_context and cl_event */
-struct _cl_context;
-struct _cl_event;
-#endif
-
-#ifndef GL_ARB_debug_output
-typedef void (APIENTRY *GLDEBUGPROCARB)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
-#endif
-
-#ifndef GL_AMD_debug_output
-typedef void (APIENTRY *GLDEBUGPROCAMD)(GLuint id,GLenum category,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
-#endif
-
-#ifndef GL_KHR_debug
-typedef void (APIENTRY *GLDEBUGPROC)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam);
-#endif
-
-#ifndef GL_NV_vdpau_interop
-typedef GLintptr GLvdpauSurfaceNV;
-#endif
-
-#ifndef GL_OES_fixed_point
-/* GLint must be 32 bits, a relatively safe assumption on modern CPUs */
-typedef GLint GLfixed;
-#endif
-
-#ifndef GL_VERSION_1_2
-#define GL_VERSION_1_2 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendColor (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
-GLAPI void APIENTRY glBlendEquation (GLenum mode);
-GLAPI void APIENTRY glDrawRangeElements (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices);
-GLAPI void APIENTRY glTexImage3D (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glCopyTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glColorTable (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table);
-GLAPI void APIENTRY glColorTableParameterfv (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glColorTableParameteriv (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glCopyColorTable (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glGetColorTable (GLenum target, GLenum format, GLenum type, GLvoid *table);
-GLAPI void APIENTRY glGetColorTableParameterfv (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetColorTableParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glColorSubTable (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data);
-GLAPI void APIENTRY glCopyColorSubTable (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glConvolutionFilter1D (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image);
-GLAPI void APIENTRY glConvolutionFilter2D (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image);
-GLAPI void APIENTRY glConvolutionParameterf (GLenum target, GLenum pname, GLfloat params);
-GLAPI void APIENTRY glConvolutionParameterfv (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glConvolutionParameteri (GLenum target, GLenum pname, GLint params);
-GLAPI void APIENTRY glConvolutionParameteriv (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glCopyConvolutionFilter1D (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glCopyConvolutionFilter2D (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetConvolutionFilter (GLenum target, GLenum format, GLenum type, GLvoid *image);
-GLAPI void APIENTRY glGetConvolutionParameterfv (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetConvolutionParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetSeparableFilter (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span);
-GLAPI void APIENTRY glSeparableFilter2D (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column);
-GLAPI void APIENTRY glGetHistogram (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-GLAPI void APIENTRY glGetHistogramParameterfv (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetHistogramParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMinmax (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-GLAPI void APIENTRY glGetMinmaxParameterfv (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMinmaxParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glHistogram (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
-GLAPI void APIENTRY glMinmax (GLenum target, GLenum internalformat, GLboolean sink);
-GLAPI void APIENTRY glResetHistogram (GLenum target);
-GLAPI void APIENTRY glResetMinmax (GLenum target);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDCOLORPROC) (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
-typedef void (APIENTRYP PFNGLBLENDEQUATIONPROC) (GLenum mode);
-typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices);
-typedef void (APIENTRYP PFNGLTEXIMAGE3DPROC) (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLCOLORTABLEPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table);
-typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERFVPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERIVPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLCOPYCOLORTABLEPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPROC) (GLenum target, GLenum format, GLenum type, GLvoid *table);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLCOLORSUBTABLEPROC) (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOPYCOLORSUBTABLEPROC) (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER1DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image);
-typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER2DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFPROC) (GLenum target, GLenum pname, GLfloat params);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFVPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIPROC) (GLenum target, GLenum pname, GLint params);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIVPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER1DPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER2DPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONFILTERPROC) (GLenum target, GLenum format, GLenum type, GLvoid *image);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETSEPARABLEFILTERPROC) (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span);
-typedef void (APIENTRYP PFNGLSEPARABLEFILTER2DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column);
-typedef void (APIENTRYP PFNGLGETHISTOGRAMPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMINMAXPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLHISTOGRAMPROC) (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
-typedef void (APIENTRYP PFNGLMINMAXPROC) (GLenum target, GLenum internalformat, GLboolean sink);
-typedef void (APIENTRYP PFNGLRESETHISTOGRAMPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLRESETMINMAXPROC) (GLenum target);
-#endif
-
-#ifndef GL_VERSION_1_3
-#define GL_VERSION_1_3 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glActiveTexture (GLenum texture);
-GLAPI void APIENTRY glSampleCoverage (GLfloat value, GLboolean invert);
-GLAPI void APIENTRY glCompressedTexImage3D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexImage2D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexImage1D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexSubImage2D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexSubImage1D (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glGetCompressedTexImage (GLenum target, GLint level, GLvoid *img);
-GLAPI void APIENTRY glClientActiveTexture (GLenum texture);
-GLAPI void APIENTRY glMultiTexCoord1d (GLenum target, GLdouble s);
-GLAPI void APIENTRY glMultiTexCoord1dv (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord1f (GLenum target, GLfloat s);
-GLAPI void APIENTRY glMultiTexCoord1fv (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord1i (GLenum target, GLint s);
-GLAPI void APIENTRY glMultiTexCoord1iv (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord1s (GLenum target, GLshort s);
-GLAPI void APIENTRY glMultiTexCoord1sv (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glMultiTexCoord2d (GLenum target, GLdouble s, GLdouble t);
-GLAPI void APIENTRY glMultiTexCoord2dv (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord2f (GLenum target, GLfloat s, GLfloat t);
-GLAPI void APIENTRY glMultiTexCoord2fv (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord2i (GLenum target, GLint s, GLint t);
-GLAPI void APIENTRY glMultiTexCoord2iv (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord2s (GLenum target, GLshort s, GLshort t);
-GLAPI void APIENTRY glMultiTexCoord2sv (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glMultiTexCoord3d (GLenum target, GLdouble s, GLdouble t, GLdouble r);
-GLAPI void APIENTRY glMultiTexCoord3dv (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord3f (GLenum target, GLfloat s, GLfloat t, GLfloat r);
-GLAPI void APIENTRY glMultiTexCoord3fv (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord3i (GLenum target, GLint s, GLint t, GLint r);
-GLAPI void APIENTRY glMultiTexCoord3iv (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord3s (GLenum target, GLshort s, GLshort t, GLshort r);
-GLAPI void APIENTRY glMultiTexCoord3sv (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glMultiTexCoord4d (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
-GLAPI void APIENTRY glMultiTexCoord4dv (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord4f (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
-GLAPI void APIENTRY glMultiTexCoord4fv (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord4i (GLenum target, GLint s, GLint t, GLint r, GLint q);
-GLAPI void APIENTRY glMultiTexCoord4iv (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord4s (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
-GLAPI void APIENTRY glMultiTexCoord4sv (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glLoadTransposeMatrixf (const GLfloat *m);
-GLAPI void APIENTRY glLoadTransposeMatrixd (const GLdouble *m);
-GLAPI void APIENTRY glMultTransposeMatrixf (const GLfloat *m);
-GLAPI void APIENTRY glMultTransposeMatrixd (const GLdouble *m);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLACTIVETEXTUREPROC) (GLenum texture);
-typedef void (APIENTRYP PFNGLSAMPLECOVERAGEPROC) (GLfloat value, GLboolean invert);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE2DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE1DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE2DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE1DPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXIMAGEPROC) (GLenum target, GLint level, GLvoid *img);
-typedef void (APIENTRYP PFNGLCLIENTACTIVETEXTUREPROC) (GLenum texture);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1DPROC) (GLenum target, GLdouble s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1DVPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1FPROC) (GLenum target, GLfloat s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1FVPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1IPROC) (GLenum target, GLint s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1IVPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1SPROC) (GLenum target, GLshort s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1SVPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2DPROC) (GLenum target, GLdouble s, GLdouble t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2DVPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2FPROC) (GLenum target, GLfloat s, GLfloat t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2FVPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2IPROC) (GLenum target, GLint s, GLint t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2IVPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2SPROC) (GLenum target, GLshort s, GLshort t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2SVPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3DPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3DVPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3FPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3FVPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3IPROC) (GLenum target, GLint s, GLint t, GLint r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3IVPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3SPROC) (GLenum target, GLshort s, GLshort t, GLshort r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3SVPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4DPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4DVPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4FPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4FVPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4IPROC) (GLenum target, GLint s, GLint t, GLint r, GLint q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4IVPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4SPROC) (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4SVPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXFPROC) (const GLfloat *m);
-typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXDPROC) (const GLdouble *m);
-typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXFPROC) (const GLfloat *m);
-typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXDPROC) (const GLdouble *m);
-#endif
-
-#ifndef GL_VERSION_1_4
-#define GL_VERSION_1_4 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendFuncSeparate (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
-GLAPI void APIENTRY glMultiDrawArrays (GLenum mode, const GLint *first, const GLsizei *count, GLsizei drawcount);
-GLAPI void APIENTRY glMultiDrawElements (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei drawcount);
-GLAPI void APIENTRY glPointParameterf (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glPointParameterfv (GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glPointParameteri (GLenum pname, GLint param);
-GLAPI void APIENTRY glPointParameteriv (GLenum pname, const GLint *params);
-GLAPI void APIENTRY glFogCoordf (GLfloat coord);
-GLAPI void APIENTRY glFogCoordfv (const GLfloat *coord);
-GLAPI void APIENTRY glFogCoordd (GLdouble coord);
-GLAPI void APIENTRY glFogCoorddv (const GLdouble *coord);
-GLAPI void APIENTRY glFogCoordPointer (GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glSecondaryColor3b (GLbyte red, GLbyte green, GLbyte blue);
-GLAPI void APIENTRY glSecondaryColor3bv (const GLbyte *v);
-GLAPI void APIENTRY glSecondaryColor3d (GLdouble red, GLdouble green, GLdouble blue);
-GLAPI void APIENTRY glSecondaryColor3dv (const GLdouble *v);
-GLAPI void APIENTRY glSecondaryColor3f (GLfloat red, GLfloat green, GLfloat blue);
-GLAPI void APIENTRY glSecondaryColor3fv (const GLfloat *v);
-GLAPI void APIENTRY glSecondaryColor3i (GLint red, GLint green, GLint blue);
-GLAPI void APIENTRY glSecondaryColor3iv (const GLint *v);
-GLAPI void APIENTRY glSecondaryColor3s (GLshort red, GLshort green, GLshort blue);
-GLAPI void APIENTRY glSecondaryColor3sv (const GLshort *v);
-GLAPI void APIENTRY glSecondaryColor3ub (GLubyte red, GLubyte green, GLubyte blue);
-GLAPI void APIENTRY glSecondaryColor3ubv (const GLubyte *v);
-GLAPI void APIENTRY glSecondaryColor3ui (GLuint red, GLuint green, GLuint blue);
-GLAPI void APIENTRY glSecondaryColor3uiv (const GLuint *v);
-GLAPI void APIENTRY glSecondaryColor3us (GLushort red, GLushort green, GLushort blue);
-GLAPI void APIENTRY glSecondaryColor3usv (const GLushort *v);
-GLAPI void APIENTRY glSecondaryColorPointer (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glWindowPos2d (GLdouble x, GLdouble y);
-GLAPI void APIENTRY glWindowPos2dv (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos2f (GLfloat x, GLfloat y);
-GLAPI void APIENTRY glWindowPos2fv (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos2i (GLint x, GLint y);
-GLAPI void APIENTRY glWindowPos2iv (const GLint *v);
-GLAPI void APIENTRY glWindowPos2s (GLshort x, GLshort y);
-GLAPI void APIENTRY glWindowPos2sv (const GLshort *v);
-GLAPI void APIENTRY glWindowPos3d (GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glWindowPos3dv (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos3f (GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glWindowPos3fv (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos3i (GLint x, GLint y, GLint z);
-GLAPI void APIENTRY glWindowPos3iv (const GLint *v);
-GLAPI void APIENTRY glWindowPos3s (GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glWindowPos3sv (const GLshort *v);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
-typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei drawcount);
-typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei drawcount);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFVPROC) (GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERIPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERIVPROC) (GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLFOGCOORDFPROC) (GLfloat coord);
-typedef void (APIENTRYP PFNGLFOGCOORDFVPROC) (const GLfloat *coord);
-typedef void (APIENTRYP PFNGLFOGCOORDDPROC) (GLdouble coord);
-typedef void (APIENTRYP PFNGLFOGCOORDDVPROC) (const GLdouble *coord);
-typedef void (APIENTRYP PFNGLFOGCOORDPOINTERPROC) (GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BPROC) (GLbyte red, GLbyte green, GLbyte blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BVPROC) (const GLbyte *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DPROC) (GLdouble red, GLdouble green, GLdouble blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DVPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FPROC) (GLfloat red, GLfloat green, GLfloat blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FVPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IPROC) (GLint red, GLint green, GLint blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IVPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SPROC) (GLshort red, GLshort green, GLshort blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SVPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBPROC) (GLubyte red, GLubyte green, GLubyte blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBVPROC) (const GLubyte *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIPROC) (GLuint red, GLuint green, GLuint blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIVPROC) (const GLuint *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USPROC) (GLushort red, GLushort green, GLushort blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USVPROC) (const GLushort *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTERPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLWINDOWPOS2DPROC) (GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2DVPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2FPROC) (GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2FVPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2IPROC) (GLint x, GLint y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2IVPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2SPROC) (GLshort x, GLshort y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2SVPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3DPROC) (GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3DVPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3FPROC) (GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3FVPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3IPROC) (GLint x, GLint y, GLint z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3IVPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3SPROC) (GLshort x, GLshort y, GLshort z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3SVPROC) (const GLshort *v);
-#endif
-
-#ifndef GL_VERSION_1_5
-#define GL_VERSION_1_5 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGenQueries (GLsizei n, GLuint *ids);
-GLAPI void APIENTRY glDeleteQueries (GLsizei n, const GLuint *ids);
-GLAPI GLboolean APIENTRY glIsQuery (GLuint id);
-GLAPI void APIENTRY glBeginQuery (GLenum target, GLuint id);
-GLAPI void APIENTRY glEndQuery (GLenum target);
-GLAPI void APIENTRY glGetQueryiv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetQueryObjectiv (GLuint id, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetQueryObjectuiv (GLuint id, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glBindBuffer (GLenum target, GLuint buffer);
-GLAPI void APIENTRY glDeleteBuffers (GLsizei n, const GLuint *buffers);
-GLAPI void APIENTRY glGenBuffers (GLsizei n, GLuint *buffers);
-GLAPI GLboolean APIENTRY glIsBuffer (GLuint buffer);
-GLAPI void APIENTRY glBufferData (GLenum target, GLsizeiptr size, const GLvoid *data, GLenum usage);
-GLAPI void APIENTRY glBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, const GLvoid *data);
-GLAPI void APIENTRY glGetBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, GLvoid *data);
-GLAPI GLvoid* APIENTRY glMapBuffer (GLenum target, GLenum access);
-GLAPI GLboolean APIENTRY glUnmapBuffer (GLenum target);
-GLAPI void APIENTRY glGetBufferParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetBufferPointerv (GLenum target, GLenum pname, GLvoid* *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGENQUERIESPROC) (GLsizei n, GLuint *ids);
-typedef void (APIENTRYP PFNGLDELETEQUERIESPROC) (GLsizei n, const GLuint *ids);
-typedef GLboolean (APIENTRYP PFNGLISQUERYPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLBEGINQUERYPROC) (GLenum target, GLuint id);
-typedef void (APIENTRYP PFNGLENDQUERYPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLGETQUERYIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTIVPROC) (GLuint id, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTUIVPROC) (GLuint id, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLBINDBUFFERPROC) (GLenum target, GLuint buffer);
-typedef void (APIENTRYP PFNGLDELETEBUFFERSPROC) (GLsizei n, const GLuint *buffers);
-typedef void (APIENTRYP PFNGLGENBUFFERSPROC) (GLsizei n, GLuint *buffers);
-typedef GLboolean (APIENTRYP PFNGLISBUFFERPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLBUFFERDATAPROC) (GLenum target, GLsizeiptr size, const GLvoid *data, GLenum usage);
-typedef void (APIENTRYP PFNGLBUFFERSUBDATAPROC) (GLenum target, GLintptr offset, GLsizeiptr size, const GLvoid *data);
-typedef void (APIENTRYP PFNGLGETBUFFERSUBDATAPROC) (GLenum target, GLintptr offset, GLsizeiptr size, GLvoid *data);
-typedef GLvoid* (APIENTRYP PFNGLMAPBUFFERPROC) (GLenum target, GLenum access);
-typedef GLboolean (APIENTRYP PFNGLUNMAPBUFFERPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETBUFFERPOINTERVPROC) (GLenum target, GLenum pname, GLvoid* *params);
-#endif
-
-#ifndef GL_VERSION_2_0
-#define GL_VERSION_2_0 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendEquationSeparate (GLenum modeRGB, GLenum modeAlpha);
-GLAPI void APIENTRY glDrawBuffers (GLsizei n, const GLenum *bufs);
-GLAPI void APIENTRY glStencilOpSeparate (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
-GLAPI void APIENTRY glStencilFuncSeparate (GLenum face, GLenum func, GLint ref, GLuint mask);
-GLAPI void APIENTRY glStencilMaskSeparate (GLenum face, GLuint mask);
-GLAPI void APIENTRY glAttachShader (GLuint program, GLuint shader);
-GLAPI void APIENTRY glBindAttribLocation (GLuint program, GLuint index, const GLchar *name);
-GLAPI void APIENTRY glCompileShader (GLuint shader);
-GLAPI GLuint APIENTRY glCreateProgram (void);
-GLAPI GLuint APIENTRY glCreateShader (GLenum type);
-GLAPI void APIENTRY glDeleteProgram (GLuint program);
-GLAPI void APIENTRY glDeleteShader (GLuint shader);
-GLAPI void APIENTRY glDetachShader (GLuint program, GLuint shader);
-GLAPI void APIENTRY glDisableVertexAttribArray (GLuint index);
-GLAPI void APIENTRY glEnableVertexAttribArray (GLuint index);
-GLAPI void APIENTRY glGetActiveAttrib (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
-GLAPI void APIENTRY glGetActiveUniform (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
-GLAPI void APIENTRY glGetAttachedShaders (GLuint program, GLsizei maxCount, GLsizei *count, GLuint *obj);
-GLAPI GLint APIENTRY glGetAttribLocation (GLuint program, const GLchar *name);
-GLAPI void APIENTRY glGetProgramiv (GLuint program, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetProgramInfoLog (GLuint program, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-GLAPI void APIENTRY glGetShaderiv (GLuint shader, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetShaderInfoLog (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-GLAPI void APIENTRY glGetShaderSource (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *source);
-GLAPI GLint APIENTRY glGetUniformLocation (GLuint program, const GLchar *name);
-GLAPI void APIENTRY glGetUniformfv (GLuint program, GLint location, GLfloat *params);
-GLAPI void APIENTRY glGetUniformiv (GLuint program, GLint location, GLint *params);
-GLAPI void APIENTRY glGetVertexAttribdv (GLuint index, GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glGetVertexAttribfv (GLuint index, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetVertexAttribiv (GLuint index, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVertexAttribPointerv (GLuint index, GLenum pname, GLvoid* *pointer);
-GLAPI GLboolean APIENTRY glIsProgram (GLuint program);
-GLAPI GLboolean APIENTRY glIsShader (GLuint shader);
-GLAPI void APIENTRY glLinkProgram (GLuint program);
-GLAPI void APIENTRY glShaderSource (GLuint shader, GLsizei count, const GLchar* const *string, const GLint *length);
-GLAPI void APIENTRY glUseProgram (GLuint program);
-GLAPI void APIENTRY glUniform1f (GLint location, GLfloat v0);
-GLAPI void APIENTRY glUniform2f (GLint location, GLfloat v0, GLfloat v1);
-GLAPI void APIENTRY glUniform3f (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-GLAPI void APIENTRY glUniform4f (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-GLAPI void APIENTRY glUniform1i (GLint location, GLint v0);
-GLAPI void APIENTRY glUniform2i (GLint location, GLint v0, GLint v1);
-GLAPI void APIENTRY glUniform3i (GLint location, GLint v0, GLint v1, GLint v2);
-GLAPI void APIENTRY glUniform4i (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-GLAPI void APIENTRY glUniform1fv (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform2fv (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform3fv (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform4fv (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform1iv (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniform2iv (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniform3iv (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniform4iv (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniformMatrix2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glValidateProgram (GLuint program);
-GLAPI void APIENTRY glVertexAttrib1d (GLuint index, GLdouble x);
-GLAPI void APIENTRY glVertexAttrib1dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib1f (GLuint index, GLfloat x);
-GLAPI void APIENTRY glVertexAttrib1fv (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib1s (GLuint index, GLshort x);
-GLAPI void APIENTRY glVertexAttrib1sv (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib2d (GLuint index, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glVertexAttrib2dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib2f (GLuint index, GLfloat x, GLfloat y);
-GLAPI void APIENTRY glVertexAttrib2fv (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib2s (GLuint index, GLshort x, GLshort y);
-GLAPI void APIENTRY glVertexAttrib2sv (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib3d (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glVertexAttrib3dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib3f (GLuint index, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glVertexAttrib3fv (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib3s (GLuint index, GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glVertexAttrib3sv (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4Nbv (GLuint index, const GLbyte *v);
-GLAPI void APIENTRY glVertexAttrib4Niv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttrib4Nsv (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4Nub (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
-GLAPI void APIENTRY glVertexAttrib4Nubv (GLuint index, const GLubyte *v);
-GLAPI void APIENTRY glVertexAttrib4Nuiv (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttrib4Nusv (GLuint index, const GLushort *v);
-GLAPI void APIENTRY glVertexAttrib4bv (GLuint index, const GLbyte *v);
-GLAPI void APIENTRY glVertexAttrib4d (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glVertexAttrib4dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib4f (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glVertexAttrib4fv (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib4iv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttrib4s (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
-GLAPI void APIENTRY glVertexAttrib4sv (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4ubv (GLuint index, const GLubyte *v);
-GLAPI void APIENTRY glVertexAttrib4uiv (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttrib4usv (GLuint index, const GLushort *v);
-GLAPI void APIENTRY glVertexAttribPointer (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEPROC) (GLenum modeRGB, GLenum modeAlpha);
-typedef void (APIENTRYP PFNGLDRAWBUFFERSPROC) (GLsizei n, const GLenum *bufs);
-typedef void (APIENTRYP PFNGLSTENCILOPSEPARATEPROC) (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
-typedef void (APIENTRYP PFNGLSTENCILFUNCSEPARATEPROC) (GLenum face, GLenum func, GLint ref, GLuint mask);
-typedef void (APIENTRYP PFNGLSTENCILMASKSEPARATEPROC) (GLenum face, GLuint mask);
-typedef void (APIENTRYP PFNGLATTACHSHADERPROC) (GLuint program, GLuint shader);
-typedef void (APIENTRYP PFNGLBINDATTRIBLOCATIONPROC) (GLuint program, GLuint index, const GLchar *name);
-typedef void (APIENTRYP PFNGLCOMPILESHADERPROC) (GLuint shader);
-typedef GLuint (APIENTRYP PFNGLCREATEPROGRAMPROC) (void);
-typedef GLuint (APIENTRYP PFNGLCREATESHADERPROC) (GLenum type);
-typedef void (APIENTRYP PFNGLDELETEPROGRAMPROC) (GLuint program);
-typedef void (APIENTRYP PFNGLDELETESHADERPROC) (GLuint shader);
-typedef void (APIENTRYP PFNGLDETACHSHADERPROC) (GLuint program, GLuint shader);
-typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBARRAYPROC) (GLuint index);
-typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBARRAYPROC) (GLuint index);
-typedef void (APIENTRYP PFNGLGETACTIVEATTRIBPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
-typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name);
-typedef void (APIENTRYP PFNGLGETATTACHEDSHADERSPROC) (GLuint program, GLsizei maxCount, GLsizei *count, GLuint *obj);
-typedef GLint (APIENTRYP PFNGLGETATTRIBLOCATIONPROC) (GLuint program, const GLchar *name);
-typedef void (APIENTRYP PFNGLGETPROGRAMIVPROC) (GLuint program, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMINFOLOGPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-typedef void (APIENTRYP PFNGLGETSHADERIVPROC) (GLuint shader, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETSHADERINFOLOGPROC) (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-typedef void (APIENTRYP PFNGLGETSHADERSOURCEPROC) (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *source);
-typedef GLint (APIENTRYP PFNGLGETUNIFORMLOCATIONPROC) (GLuint program, const GLchar *name);
-typedef void (APIENTRYP PFNGLGETUNIFORMFVPROC) (GLuint program, GLint location, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETUNIFORMIVPROC) (GLuint program, GLint location, GLint *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVPROC) (GLuint index, GLenum pname, GLdouble *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVPROC) (GLuint index, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVPROC) (GLuint index, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVPROC) (GLuint index, GLenum pname, GLvoid* *pointer);
-typedef GLboolean (APIENTRYP PFNGLISPROGRAMPROC) (GLuint program);
-typedef GLboolean (APIENTRYP PFNGLISSHADERPROC) (GLuint shader);
-typedef void (APIENTRYP PFNGLLINKPROGRAMPROC) (GLuint program);
-typedef void (APIENTRYP PFNGLSHADERSOURCEPROC) (GLuint shader, GLsizei count, const GLchar* const *string, const GLint *length);
-typedef void (APIENTRYP PFNGLUSEPROGRAMPROC) (GLuint program);
-typedef void (APIENTRYP PFNGLUNIFORM1FPROC) (GLint location, GLfloat v0);
-typedef void (APIENTRYP PFNGLUNIFORM2FPROC) (GLint location, GLfloat v0, GLfloat v1);
-typedef void (APIENTRYP PFNGLUNIFORM3FPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-typedef void (APIENTRYP PFNGLUNIFORM4FPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-typedef void (APIENTRYP PFNGLUNIFORM1IPROC) (GLint location, GLint v0);
-typedef void (APIENTRYP PFNGLUNIFORM2IPROC) (GLint location, GLint v0, GLint v1);
-typedef void (APIENTRYP PFNGLUNIFORM3IPROC) (GLint location, GLint v0, GLint v1, GLint v2);
-typedef void (APIENTRYP PFNGLUNIFORM4IPROC) (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-typedef void (APIENTRYP PFNGLUNIFORM1FVPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM2FVPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM3FVPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM4FVPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM1IVPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORM2IVPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORM3IVPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORM4IVPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLVALIDATEPROGRAMPROC) (GLuint program);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1DPROC) (GLuint index, GLdouble x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1FPROC) (GLuint index, GLfloat x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1SPROC) (GLuint index, GLshort x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2DPROC) (GLuint index, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2FPROC) (GLuint index, GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2SPROC) (GLuint index, GLshort x, GLshort y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3FPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3SPROC) (GLuint index, GLshort x, GLshort y, GLshort z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NBVPROC) (GLuint index, const GLbyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NIVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NSVPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBVPROC) (GLuint index, const GLubyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUIVPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUSVPROC) (GLuint index, const GLushort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4BVPROC) (GLuint index, const GLbyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4FPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4IVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4SPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVPROC) (GLuint index, const GLubyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4UIVPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4USVPROC) (GLuint index, const GLushort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer);
-#endif
-
-#ifndef GL_VERSION_2_1
-#define GL_VERSION_2_1 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glUniformMatrix2x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix3x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix2x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix4x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix3x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix4x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-#endif
-
-#ifndef GL_VERSION_3_0
-#define GL_VERSION_3_0 1
-/* OpenGL 3.0 also reuses entry points from these extensions: */
-/* ARB_framebuffer_object */
-/* ARB_map_buffer_range */
-/* ARB_vertex_array_object */
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColorMaski (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
-GLAPI void APIENTRY glGetBooleani_v (GLenum target, GLuint index, GLboolean *data);
-GLAPI void APIENTRY glGetIntegeri_v (GLenum target, GLuint index, GLint *data);
-GLAPI void APIENTRY glEnablei (GLenum target, GLuint index);
-GLAPI void APIENTRY glDisablei (GLenum target, GLuint index);
-GLAPI GLboolean APIENTRY glIsEnabledi (GLenum target, GLuint index);
-GLAPI void APIENTRY glBeginTransformFeedback (GLenum primitiveMode);
-GLAPI void APIENTRY glEndTransformFeedback (void);
-GLAPI void APIENTRY glBindBufferRange (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
-GLAPI void APIENTRY glBindBufferBase (GLenum target, GLuint index, GLuint buffer);
-GLAPI void APIENTRY glTransformFeedbackVaryings (GLuint program, GLsizei count, const GLchar* const *varyings, GLenum bufferMode);
-GLAPI void APIENTRY glGetTransformFeedbackVarying (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
-GLAPI void APIENTRY glClampColor (GLenum target, GLenum clamp);
-GLAPI void APIENTRY glBeginConditionalRender (GLuint id, GLenum mode);
-GLAPI void APIENTRY glEndConditionalRender (void);
-GLAPI void APIENTRY glVertexAttribIPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glGetVertexAttribIiv (GLuint index, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVertexAttribIuiv (GLuint index, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glVertexAttribI1i (GLuint index, GLint x);
-GLAPI void APIENTRY glVertexAttribI2i (GLuint index, GLint x, GLint y);
-GLAPI void APIENTRY glVertexAttribI3i (GLuint index, GLint x, GLint y, GLint z);
-GLAPI void APIENTRY glVertexAttribI4i (GLuint index, GLint x, GLint y, GLint z, GLint w);
-GLAPI void APIENTRY glVertexAttribI1ui (GLuint index, GLuint x);
-GLAPI void APIENTRY glVertexAttribI2ui (GLuint index, GLuint x, GLuint y);
-GLAPI void APIENTRY glVertexAttribI3ui (GLuint index, GLuint x, GLuint y, GLuint z);
-GLAPI void APIENTRY glVertexAttribI4ui (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-GLAPI void APIENTRY glVertexAttribI1iv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttribI2iv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttribI3iv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttribI4iv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttribI1uiv (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttribI2uiv (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttribI3uiv (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttribI4uiv (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttribI4bv (GLuint index, const GLbyte *v);
-GLAPI void APIENTRY glVertexAttribI4sv (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttribI4ubv (GLuint index, const GLubyte *v);
-GLAPI void APIENTRY glVertexAttribI4usv (GLuint index, const GLushort *v);
-GLAPI void APIENTRY glGetUniformuiv (GLuint program, GLint location, GLuint *params);
-GLAPI void APIENTRY glBindFragDataLocation (GLuint program, GLuint color, const GLchar *name);
-GLAPI GLint APIENTRY glGetFragDataLocation (GLuint program, const GLchar *name);
-GLAPI void APIENTRY glUniform1ui (GLint location, GLuint v0);
-GLAPI void APIENTRY glUniform2ui (GLint location, GLuint v0, GLuint v1);
-GLAPI void APIENTRY glUniform3ui (GLint location, GLuint v0, GLuint v1, GLuint v2);
-GLAPI void APIENTRY glUniform4ui (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-GLAPI void APIENTRY glUniform1uiv (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glUniform2uiv (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glUniform3uiv (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glUniform4uiv (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glTexParameterIiv (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glTexParameterIuiv (GLenum target, GLenum pname, const GLuint *params);
-GLAPI void APIENTRY glGetTexParameterIiv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetTexParameterIuiv (GLenum target, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glClearBufferiv (GLenum buffer, GLint drawbuffer, const GLint *value);
-GLAPI void APIENTRY glClearBufferuiv (GLenum buffer, GLint drawbuffer, const GLuint *value);
-GLAPI void APIENTRY glClearBufferfv (GLenum buffer, GLint drawbuffer, const GLfloat *value);
-GLAPI void APIENTRY glClearBufferfi (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil);
-GLAPI const GLubyte * APIENTRY glGetStringi (GLenum name, GLuint index);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLORMASKIPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
-typedef void (APIENTRYP PFNGLGETBOOLEANI_VPROC) (GLenum target, GLuint index, GLboolean *data);
-typedef void (APIENTRYP PFNGLGETINTEGERI_VPROC) (GLenum target, GLuint index, GLint *data);
-typedef void (APIENTRYP PFNGLENABLEIPROC) (GLenum target, GLuint index);
-typedef void (APIENTRYP PFNGLDISABLEIPROC) (GLenum target, GLuint index);
-typedef GLboolean (APIENTRYP PFNGLISENABLEDIPROC) (GLenum target, GLuint index);
-typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKPROC) (GLenum primitiveMode);
-typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKPROC) (void);
-typedef void (APIENTRYP PFNGLBINDBUFFERRANGEPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
-typedef void (APIENTRYP PFNGLBINDBUFFERBASEPROC) (GLenum target, GLuint index, GLuint buffer);
-typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSPROC) (GLuint program, GLsizei count, const GLchar* const *varyings, GLenum bufferMode);
-typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
-typedef void (APIENTRYP PFNGLCLAMPCOLORPROC) (GLenum target, GLenum clamp);
-typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERPROC) (GLuint id, GLenum mode);
-typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERPROC) (void);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBIPOINTERPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIIVPROC) (GLuint index, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIUIVPROC) (GLuint index, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IPROC) (GLuint index, GLint x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IPROC) (GLuint index, GLint x, GLint y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IPROC) (GLuint index, GLint x, GLint y, GLint z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IPROC) (GLuint index, GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIPROC) (GLuint index, GLuint x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIPROC) (GLuint index, GLuint x, GLuint y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIPROC) (GLuint index, GLuint x, GLuint y, GLuint z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIPROC) (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIVPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIVPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIVPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIVPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4BVPROC) (GLuint index, const GLbyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4SVPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UBVPROC) (GLuint index, const GLubyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4USVPROC) (GLuint index, const GLushort *v);
-typedef void (APIENTRYP PFNGLGETUNIFORMUIVPROC) (GLuint program, GLint location, GLuint *params);
-typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONPROC) (GLuint program, GLuint color, const GLchar *name);
-typedef GLint (APIENTRYP PFNGLGETFRAGDATALOCATIONPROC) (GLuint program, const GLchar *name);
-typedef void (APIENTRYP PFNGLUNIFORM1UIPROC) (GLint location, GLuint v0);
-typedef void (APIENTRYP PFNGLUNIFORM2UIPROC) (GLint location, GLuint v0, GLuint v1);
-typedef void (APIENTRYP PFNGLUNIFORM3UIPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2);
-typedef void (APIENTRYP PFNGLUNIFORM4UIPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-typedef void (APIENTRYP PFNGLUNIFORM1UIVPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLUNIFORM2UIVPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLUNIFORM3UIVPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLUNIFORM4UIVPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLTEXPARAMETERIIVPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLTEXPARAMETERIUIVPROC) (GLenum target, GLenum pname, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETTEXPARAMETERIIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETTEXPARAMETERIUIVPROC) (GLenum target, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLCLEARBUFFERIVPROC) (GLenum buffer, GLint drawbuffer, const GLint *value);
-typedef void (APIENTRYP PFNGLCLEARBUFFERUIVPROC) (GLenum buffer, GLint drawbuffer, const GLuint *value);
-typedef void (APIENTRYP PFNGLCLEARBUFFERFVPROC) (GLenum buffer, GLint drawbuffer, const GLfloat *value);
-typedef void (APIENTRYP PFNGLCLEARBUFFERFIPROC) (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil);
-typedef const GLubyte * (APIENTRYP PFNGLGETSTRINGIPROC) (GLenum name, GLuint index);
-#endif
-
-#ifndef GL_VERSION_3_1
-#define GL_VERSION_3_1 1
-/* OpenGL 3.1 also reuses entry points from these extensions: */
-/* ARB_copy_buffer */
-/* ARB_uniform_buffer_object */
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawArraysInstanced (GLenum mode, GLint first, GLsizei count, GLsizei instancecount);
-GLAPI void APIENTRY glDrawElementsInstanced (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei instancecount);
-GLAPI void APIENTRY glTexBuffer (GLenum target, GLenum internalformat, GLuint buffer);
-GLAPI void APIENTRY glPrimitiveRestartIndex (GLuint index);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDPROC) (GLenum mode, GLint first, GLsizei count, GLsizei instancecount);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei instancecount);
-typedef void (APIENTRYP PFNGLTEXBUFFERPROC) (GLenum target, GLenum internalformat, GLuint buffer);
-typedef void (APIENTRYP PFNGLPRIMITIVERESTARTINDEXPROC) (GLuint index);
-#endif
-
-#ifndef GL_VERSION_3_2
-#define GL_VERSION_3_2 1
-/* OpenGL 3.2 also reuses entry points from these extensions: */
-/* ARB_draw_elements_base_vertex */
-/* ARB_provoking_vertex */
-/* ARB_sync */
-/* ARB_texture_multisample */
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetInteger64i_v (GLenum target, GLuint index, GLint64 *data);
-GLAPI void APIENTRY glGetBufferParameteri64v (GLenum target, GLenum pname, GLint64 *params);
-GLAPI void APIENTRY glFramebufferTexture (GLenum target, GLenum attachment, GLuint texture, GLint level);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETINTEGER64I_VPROC) (GLenum target, GLuint index, GLint64 *data);
-typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERI64VPROC) (GLenum target, GLenum pname, GLint64 *params);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
-#endif
-
-#ifndef GL_VERSION_3_3
-#define GL_VERSION_3_3 1
-/* OpenGL 3.3 also reuses entry points from these extensions: */
-/* ARB_blend_func_extended */
-/* ARB_sampler_objects */
-/* ARB_explicit_attrib_location, but it has none */
-/* ARB_occlusion_query2 (no entry points) */
-/* ARB_shader_bit_encoding (no entry points) */
-/* ARB_texture_rgb10_a2ui (no entry points) */
-/* ARB_texture_swizzle (no entry points) */
-/* ARB_timer_query */
-/* ARB_vertex_type_2_10_10_10_rev */
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttribDivisor (GLuint index, GLuint divisor);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBDIVISORPROC) (GLuint index, GLuint divisor);
-#endif
-
-#ifndef GL_VERSION_4_0
-#define GL_VERSION_4_0 1
-/* OpenGL 4.0 also reuses entry points from these extensions: */
-/* ARB_texture_query_lod (no entry points) */
-/* ARB_draw_indirect */
-/* ARB_gpu_shader5 (no entry points) */
-/* ARB_gpu_shader_fp64 */
-/* ARB_shader_subroutine */
-/* ARB_tessellation_shader */
-/* ARB_texture_buffer_object_rgb32 (no entry points) */
-/* ARB_texture_cube_map_array (no entry points) */
-/* ARB_texture_gather (no entry points) */
-/* ARB_transform_feedback2 */
-/* ARB_transform_feedback3 */
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMinSampleShading (GLfloat value);
-GLAPI void APIENTRY glBlendEquationi (GLuint buf, GLenum mode);
-GLAPI void APIENTRY glBlendEquationSeparatei (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
-GLAPI void APIENTRY glBlendFunci (GLuint buf, GLenum src, GLenum dst);
-GLAPI void APIENTRY glBlendFuncSeparatei (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMINSAMPLESHADINGPROC) (GLfloat value);
-typedef void (APIENTRYP PFNGLBLENDEQUATIONIPROC) (GLuint buf, GLenum mode);
-typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEIPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
-typedef void (APIENTRYP PFNGLBLENDFUNCIPROC) (GLuint buf, GLenum src, GLenum dst);
-typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEIPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
-#endif
-
-#ifndef GL_VERSION_4_1
-#define GL_VERSION_4_1 1
-/* OpenGL 4.1 reuses entry points from these extensions: */
-/* ARB_ES2_compatibility */
-/* ARB_get_program_binary */
-/* ARB_separate_shader_objects */
-/* ARB_shader_precision (no entry points) */
-/* ARB_vertex_attrib_64bit */
-/* ARB_viewport_array */
-#endif
-
-#ifndef GL_VERSION_4_2
-#define GL_VERSION_4_2 1
-/* OpenGL 4.2 reuses entry points from these extensions: */
-/* ARB_base_instance */
-/* ARB_shading_language_420pack (no entry points) */
-/* ARB_transform_feedback_instanced */
-/* ARB_compressed_texture_pixel_storage (no entry points) */
-/* ARB_conservative_depth (no entry points) */
-/* ARB_internalformat_query */
-/* ARB_map_buffer_alignment (no entry points) */
-/* ARB_shader_atomic_counters */
-/* ARB_shader_image_load_store */
-/* ARB_shading_language_packing (no entry points) */
-/* ARB_texture_storage */
-#endif
-
-#ifndef GL_VERSION_4_3
-#define GL_VERSION_4_3 1
-/* OpenGL 4.3 reuses entry points from these extensions: */
-/* ARB_arrays_of_arrays (no entry points, GLSL only) */
-/* ARB_fragment_layer_viewport (no entry points, GLSL only) */
-/* ARB_shader_image_size (no entry points, GLSL only) */
-/* ARB_ES3_compatibility (no entry points) */
-/* ARB_clear_buffer_object */
-/* ARB_compute_shader */
-/* ARB_copy_image */
-/* KHR_debug (includes ARB_debug_output commands promoted to KHR without suffixes) */
-/* ARB_explicit_uniform_location (no entry points) */
-/* ARB_framebuffer_no_attachments */
-/* ARB_internalformat_query2 */
-/* ARB_invalidate_subdata */
-/* ARB_multi_draw_indirect */
-/* ARB_program_interface_query */
-/* ARB_robust_buffer_access_behavior (no entry points) */
-/* ARB_shader_storage_buffer_object */
-/* ARB_stencil_texturing (no entry points) */
-/* ARB_texture_buffer_range */
-/* ARB_texture_query_levels (no entry points) */
-/* ARB_texture_storage_multisample */
-/* ARB_texture_view */
-/* ARB_vertex_attrib_binding */
-#endif
-
-#ifndef GL_ARB_multitexture
-#define GL_ARB_multitexture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glActiveTextureARB (GLenum texture);
-GLAPI void APIENTRY glClientActiveTextureARB (GLenum texture);
-GLAPI void APIENTRY glMultiTexCoord1dARB (GLenum target, GLdouble s);
-GLAPI void APIENTRY glMultiTexCoord1dvARB (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord1fARB (GLenum target, GLfloat s);
-GLAPI void APIENTRY glMultiTexCoord1fvARB (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord1iARB (GLenum target, GLint s);
-GLAPI void APIENTRY glMultiTexCoord1ivARB (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord1sARB (GLenum target, GLshort s);
-GLAPI void APIENTRY glMultiTexCoord1svARB (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glMultiTexCoord2dARB (GLenum target, GLdouble s, GLdouble t);
-GLAPI void APIENTRY glMultiTexCoord2dvARB (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord2fARB (GLenum target, GLfloat s, GLfloat t);
-GLAPI void APIENTRY glMultiTexCoord2fvARB (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord2iARB (GLenum target, GLint s, GLint t);
-GLAPI void APIENTRY glMultiTexCoord2ivARB (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord2sARB (GLenum target, GLshort s, GLshort t);
-GLAPI void APIENTRY glMultiTexCoord2svARB (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glMultiTexCoord3dARB (GLenum target, GLdouble s, GLdouble t, GLdouble r);
-GLAPI void APIENTRY glMultiTexCoord3dvARB (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord3fARB (GLenum target, GLfloat s, GLfloat t, GLfloat r);
-GLAPI void APIENTRY glMultiTexCoord3fvARB (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord3iARB (GLenum target, GLint s, GLint t, GLint r);
-GLAPI void APIENTRY glMultiTexCoord3ivARB (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord3sARB (GLenum target, GLshort s, GLshort t, GLshort r);
-GLAPI void APIENTRY glMultiTexCoord3svARB (GLenum target, const GLshort *v);
-GLAPI void APIENTRY glMultiTexCoord4dARB (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
-GLAPI void APIENTRY glMultiTexCoord4dvARB (GLenum target, const GLdouble *v);
-GLAPI void APIENTRY glMultiTexCoord4fARB (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
-GLAPI void APIENTRY glMultiTexCoord4fvARB (GLenum target, const GLfloat *v);
-GLAPI void APIENTRY glMultiTexCoord4iARB (GLenum target, GLint s, GLint t, GLint r, GLint q);
-GLAPI void APIENTRY glMultiTexCoord4ivARB (GLenum target, const GLint *v);
-GLAPI void APIENTRY glMultiTexCoord4sARB (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
-GLAPI void APIENTRY glMultiTexCoord4svARB (GLenum target, const GLshort *v);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLACTIVETEXTUREARBPROC) (GLenum texture);
-typedef void (APIENTRYP PFNGLCLIENTACTIVETEXTUREARBPROC) (GLenum texture);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1DARBPROC) (GLenum target, GLdouble s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1DVARBPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1FARBPROC) (GLenum target, GLfloat s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1FVARBPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1IARBPROC) (GLenum target, GLint s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1IVARBPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1SARBPROC) (GLenum target, GLshort s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1SVARBPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2DARBPROC) (GLenum target, GLdouble s, GLdouble t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2DVARBPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2FARBPROC) (GLenum target, GLfloat s, GLfloat t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2FVARBPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2IARBPROC) (GLenum target, GLint s, GLint t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2IVARBPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2SARBPROC) (GLenum target, GLshort s, GLshort t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2SVARBPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3DARBPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3DVARBPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3FARBPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3FVARBPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3IARBPROC) (GLenum target, GLint s, GLint t, GLint r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3IVARBPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3SARBPROC) (GLenum target, GLshort s, GLshort t, GLshort r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3SVARBPROC) (GLenum target, const GLshort *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4DARBPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4DVARBPROC) (GLenum target, const GLdouble *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4FARBPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4FVARBPROC) (GLenum target, const GLfloat *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4IARBPROC) (GLenum target, GLint s, GLint t, GLint r, GLint q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4IVARBPROC) (GLenum target, const GLint *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4SARBPROC) (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4SVARBPROC) (GLenum target, const GLshort *v);
-#endif
-
-#ifndef GL_ARB_transpose_matrix
-#define GL_ARB_transpose_matrix 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glLoadTransposeMatrixfARB (const GLfloat *m);
-GLAPI void APIENTRY glLoadTransposeMatrixdARB (const GLdouble *m);
-GLAPI void APIENTRY glMultTransposeMatrixfARB (const GLfloat *m);
-GLAPI void APIENTRY glMultTransposeMatrixdARB (const GLdouble *m);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXFARBPROC) (const GLfloat *m);
-typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXDARBPROC) (const GLdouble *m);
-typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXFARBPROC) (const GLfloat *m);
-typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXDARBPROC) (const GLdouble *m);
-#endif
-
-#ifndef GL_ARB_multisample
-#define GL_ARB_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSampleCoverageARB (GLfloat value, GLboolean invert);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSAMPLECOVERAGEARBPROC) (GLfloat value, GLboolean invert);
-#endif
-
-#ifndef GL_ARB_texture_env_add
-#define GL_ARB_texture_env_add 1
-#endif
-
-#ifndef GL_ARB_texture_cube_map
-#define GL_ARB_texture_cube_map 1
-#endif
-
-#ifndef GL_ARB_texture_compression
-#define GL_ARB_texture_compression 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCompressedTexImage3DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexImage2DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexImage1DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexSubImage3DARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexSubImage2DARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glCompressedTexSubImage1DARB (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data);
-GLAPI void APIENTRY glGetCompressedTexImageARB (GLenum target, GLint level, GLvoid *img);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE2DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE1DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE2DARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE1DARBPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data);
-typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXIMAGEARBPROC) (GLenum target, GLint level, GLvoid *img);
-#endif
-
-#ifndef GL_ARB_texture_border_clamp
-#define GL_ARB_texture_border_clamp 1
-#endif
-
-#ifndef GL_ARB_point_parameters
-#define GL_ARB_point_parameters 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPointParameterfARB (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glPointParameterfvARB (GLenum pname, const GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFARBPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFVARBPROC) (GLenum pname, const GLfloat *params);
-#endif
-
-#ifndef GL_ARB_vertex_blend
-#define GL_ARB_vertex_blend 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glWeightbvARB (GLint size, const GLbyte *weights);
-GLAPI void APIENTRY glWeightsvARB (GLint size, const GLshort *weights);
-GLAPI void APIENTRY glWeightivARB (GLint size, const GLint *weights);
-GLAPI void APIENTRY glWeightfvARB (GLint size, const GLfloat *weights);
-GLAPI void APIENTRY glWeightdvARB (GLint size, const GLdouble *weights);
-GLAPI void APIENTRY glWeightubvARB (GLint size, const GLubyte *weights);
-GLAPI void APIENTRY glWeightusvARB (GLint size, const GLushort *weights);
-GLAPI void APIENTRY glWeightuivARB (GLint size, const GLuint *weights);
-GLAPI void APIENTRY glWeightPointerARB (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glVertexBlendARB (GLint count);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLWEIGHTBVARBPROC) (GLint size, const GLbyte *weights);
-typedef void (APIENTRYP PFNGLWEIGHTSVARBPROC) (GLint size, const GLshort *weights);
-typedef void (APIENTRYP PFNGLWEIGHTIVARBPROC) (GLint size, const GLint *weights);
-typedef void (APIENTRYP PFNGLWEIGHTFVARBPROC) (GLint size, const GLfloat *weights);
-typedef void (APIENTRYP PFNGLWEIGHTDVARBPROC) (GLint size, const GLdouble *weights);
-typedef void (APIENTRYP PFNGLWEIGHTUBVARBPROC) (GLint size, const GLubyte *weights);
-typedef void (APIENTRYP PFNGLWEIGHTUSVARBPROC) (GLint size, const GLushort *weights);
-typedef void (APIENTRYP PFNGLWEIGHTUIVARBPROC) (GLint size, const GLuint *weights);
-typedef void (APIENTRYP PFNGLWEIGHTPOINTERARBPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLVERTEXBLENDARBPROC) (GLint count);
-#endif
-
-#ifndef GL_ARB_matrix_palette
-#define GL_ARB_matrix_palette 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCurrentPaletteMatrixARB (GLint index);
-GLAPI void APIENTRY glMatrixIndexubvARB (GLint size, const GLubyte *indices);
-GLAPI void APIENTRY glMatrixIndexusvARB (GLint size, const GLushort *indices);
-GLAPI void APIENTRY glMatrixIndexuivARB (GLint size, const GLuint *indices);
-GLAPI void APIENTRY glMatrixIndexPointerARB (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCURRENTPALETTEMATRIXARBPROC) (GLint index);
-typedef void (APIENTRYP PFNGLMATRIXINDEXUBVARBPROC) (GLint size, const GLubyte *indices);
-typedef void (APIENTRYP PFNGLMATRIXINDEXUSVARBPROC) (GLint size, const GLushort *indices);
-typedef void (APIENTRYP PFNGLMATRIXINDEXUIVARBPROC) (GLint size, const GLuint *indices);
-typedef void (APIENTRYP PFNGLMATRIXINDEXPOINTERARBPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif
-
-#ifndef GL_ARB_texture_env_combine
-#define GL_ARB_texture_env_combine 1
-#endif
-
-#ifndef GL_ARB_texture_env_crossbar
-#define GL_ARB_texture_env_crossbar 1
-#endif
-
-#ifndef GL_ARB_texture_env_dot3
-#define GL_ARB_texture_env_dot3 1
-#endif
-
-#ifndef GL_ARB_texture_mirrored_repeat
-#define GL_ARB_texture_mirrored_repeat 1
-#endif
-
-#ifndef GL_ARB_depth_texture
-#define GL_ARB_depth_texture 1
-#endif
-
-#ifndef GL_ARB_shadow
-#define GL_ARB_shadow 1
-#endif
-
-#ifndef GL_ARB_shadow_ambient
-#define GL_ARB_shadow_ambient 1
-#endif
-
-#ifndef GL_ARB_window_pos
-#define GL_ARB_window_pos 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glWindowPos2dARB (GLdouble x, GLdouble y);
-GLAPI void APIENTRY glWindowPos2dvARB (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos2fARB (GLfloat x, GLfloat y);
-GLAPI void APIENTRY glWindowPos2fvARB (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos2iARB (GLint x, GLint y);
-GLAPI void APIENTRY glWindowPos2ivARB (const GLint *v);
-GLAPI void APIENTRY glWindowPos2sARB (GLshort x, GLshort y);
-GLAPI void APIENTRY glWindowPos2svARB (const GLshort *v);
-GLAPI void APIENTRY glWindowPos3dARB (GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glWindowPos3dvARB (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos3fARB (GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glWindowPos3fvARB (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos3iARB (GLint x, GLint y, GLint z);
-GLAPI void APIENTRY glWindowPos3ivARB (const GLint *v);
-GLAPI void APIENTRY glWindowPos3sARB (GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glWindowPos3svARB (const GLshort *v);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLWINDOWPOS2DARBPROC) (GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2DVARBPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2FARBPROC) (GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2FVARBPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2IARBPROC) (GLint x, GLint y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2IVARBPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2SARBPROC) (GLshort x, GLshort y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2SVARBPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3DARBPROC) (GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3DVARBPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3FARBPROC) (GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3FVARBPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3IARBPROC) (GLint x, GLint y, GLint z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3IVARBPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3SARBPROC) (GLshort x, GLshort y, GLshort z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3SVARBPROC) (const GLshort *v);
-#endif
-
-#ifndef GL_ARB_vertex_program
-#define GL_ARB_vertex_program 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttrib1dARB (GLuint index, GLdouble x);
-GLAPI void APIENTRY glVertexAttrib1dvARB (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib1fARB (GLuint index, GLfloat x);
-GLAPI void APIENTRY glVertexAttrib1fvARB (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib1sARB (GLuint index, GLshort x);
-GLAPI void APIENTRY glVertexAttrib1svARB (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib2dARB (GLuint index, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glVertexAttrib2dvARB (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib2fARB (GLuint index, GLfloat x, GLfloat y);
-GLAPI void APIENTRY glVertexAttrib2fvARB (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib2sARB (GLuint index, GLshort x, GLshort y);
-GLAPI void APIENTRY glVertexAttrib2svARB (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib3dARB (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glVertexAttrib3dvARB (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib3fARB (GLuint index, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glVertexAttrib3fvARB (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib3sARB (GLuint index, GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glVertexAttrib3svARB (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4NbvARB (GLuint index, const GLbyte *v);
-GLAPI void APIENTRY glVertexAttrib4NivARB (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttrib4NsvARB (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4NubARB (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
-GLAPI void APIENTRY glVertexAttrib4NubvARB (GLuint index, const GLubyte *v);
-GLAPI void APIENTRY glVertexAttrib4NuivARB (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttrib4NusvARB (GLuint index, const GLushort *v);
-GLAPI void APIENTRY glVertexAttrib4bvARB (GLuint index, const GLbyte *v);
-GLAPI void APIENTRY glVertexAttrib4dARB (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glVertexAttrib4dvARB (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib4fARB (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glVertexAttrib4fvARB (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib4ivARB (GLuint index, const GLint *v);
-GLAPI void APIENTRY glVertexAttrib4sARB (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
-GLAPI void APIENTRY glVertexAttrib4svARB (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4ubvARB (GLuint index, const GLubyte *v);
-GLAPI void APIENTRY glVertexAttrib4uivARB (GLuint index, const GLuint *v);
-GLAPI void APIENTRY glVertexAttrib4usvARB (GLuint index, const GLushort *v);
-GLAPI void APIENTRY glVertexAttribPointerARB (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glEnableVertexAttribArrayARB (GLuint index);
-GLAPI void APIENTRY glDisableVertexAttribArrayARB (GLuint index);
-GLAPI void APIENTRY glProgramStringARB (GLenum target, GLenum format, GLsizei len, const GLvoid *string);
-GLAPI void APIENTRY glBindProgramARB (GLenum target, GLuint program);
-GLAPI void APIENTRY glDeleteProgramsARB (GLsizei n, const GLuint *programs);
-GLAPI void APIENTRY glGenProgramsARB (GLsizei n, GLuint *programs);
-GLAPI void APIENTRY glProgramEnvParameter4dARB (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glProgramEnvParameter4dvARB (GLenum target, GLuint index, const GLdouble *params);
-GLAPI void APIENTRY glProgramEnvParameter4fARB (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glProgramEnvParameter4fvARB (GLenum target, GLuint index, const GLfloat *params);
-GLAPI void APIENTRY glProgramLocalParameter4dARB (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glProgramLocalParameter4dvARB (GLenum target, GLuint index, const GLdouble *params);
-GLAPI void APIENTRY glProgramLocalParameter4fARB (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glProgramLocalParameter4fvARB (GLenum target, GLuint index, const GLfloat *params);
-GLAPI void APIENTRY glGetProgramEnvParameterdvARB (GLenum target, GLuint index, GLdouble *params);
-GLAPI void APIENTRY glGetProgramEnvParameterfvARB (GLenum target, GLuint index, GLfloat *params);
-GLAPI void APIENTRY glGetProgramLocalParameterdvARB (GLenum target, GLuint index, GLdouble *params);
-GLAPI void APIENTRY glGetProgramLocalParameterfvARB (GLenum target, GLuint index, GLfloat *params);
-GLAPI void APIENTRY glGetProgramivARB (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetProgramStringARB (GLenum target, GLenum pname, GLvoid *string);
-GLAPI void APIENTRY glGetVertexAttribdvARB (GLuint index, GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glGetVertexAttribfvARB (GLuint index, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetVertexAttribivARB (GLuint index, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVertexAttribPointervARB (GLuint index, GLenum pname, GLvoid* *pointer);
-GLAPI GLboolean APIENTRY glIsProgramARB (GLuint program);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1DARBPROC) (GLuint index, GLdouble x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVARBPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1FARBPROC) (GLuint index, GLfloat x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVARBPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1SARBPROC) (GLuint index, GLshort x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVARBPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2DARBPROC) (GLuint index, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVARBPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2FARBPROC) (GLuint index, GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVARBPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2SARBPROC) (GLuint index, GLshort x, GLshort y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVARBPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3DARBPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVARBPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3FARBPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVARBPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3SARBPROC) (GLuint index, GLshort x, GLshort y, GLshort z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVARBPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NBVARBPROC) (GLuint index, const GLbyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NIVARBPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NSVARBPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBARBPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBVARBPROC) (GLuint index, const GLubyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUIVARBPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUSVARBPROC) (GLuint index, const GLushort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4BVARBPROC) (GLuint index, const GLbyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4DARBPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVARBPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4FARBPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVARBPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4IVARBPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4SARBPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVARBPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVARBPROC) (GLuint index, const GLubyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4UIVARBPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4USVARBPROC) (GLuint index, const GLushort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERARBPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBARRAYARBPROC) (GLuint index);
-typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBARRAYARBPROC) (GLuint index);
-typedef void (APIENTRYP PFNGLPROGRAMSTRINGARBPROC) (GLenum target, GLenum format, GLsizei len, const GLvoid *string);
-typedef void (APIENTRYP PFNGLBINDPROGRAMARBPROC) (GLenum target, GLuint program);
-typedef void (APIENTRYP PFNGLDELETEPROGRAMSARBPROC) (GLsizei n, const GLuint *programs);
-typedef void (APIENTRYP PFNGLGENPROGRAMSARBPROC) (GLsizei n, GLuint *programs);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4DARBPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4DVARBPROC) (GLenum target, GLuint index, const GLdouble *params);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4FARBPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4FVARBPROC) (GLenum target, GLuint index, const GLfloat *params);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4DARBPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4DVARBPROC) (GLenum target, GLuint index, const GLdouble *params);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4FARBPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4FVARBPROC) (GLenum target, GLuint index, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERDVARBPROC) (GLenum target, GLuint index, GLdouble *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERFVARBPROC) (GLenum target, GLuint index, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERDVARBPROC) (GLenum target, GLuint index, GLdouble *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERFVARBPROC) (GLenum target, GLuint index, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMIVARBPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMSTRINGARBPROC) (GLenum target, GLenum pname, GLvoid *string);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVARBPROC) (GLuint index, GLenum pname, GLdouble *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVARBPROC) (GLuint index, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVARBPROC) (GLuint index, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVARBPROC) (GLuint index, GLenum pname, GLvoid* *pointer);
-typedef GLboolean (APIENTRYP PFNGLISPROGRAMARBPROC) (GLuint program);
-#endif
-
-#ifndef GL_ARB_fragment_program
-#define GL_ARB_fragment_program 1
-/* All ARB_fragment_program entry points are shared with ARB_vertex_program. */
-#endif
-
-#ifndef GL_ARB_vertex_buffer_object
-#define GL_ARB_vertex_buffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindBufferARB (GLenum target, GLuint buffer);
-GLAPI void APIENTRY glDeleteBuffersARB (GLsizei n, const GLuint *buffers);
-GLAPI void APIENTRY glGenBuffersARB (GLsizei n, GLuint *buffers);
-GLAPI GLboolean APIENTRY glIsBufferARB (GLuint buffer);
-GLAPI void APIENTRY glBufferDataARB (GLenum target, GLsizeiptrARB size, const GLvoid *data, GLenum usage);
-GLAPI void APIENTRY glBufferSubDataARB (GLenum target, GLintptrARB offset, GLsizeiptrARB size, const GLvoid *data);
-GLAPI void APIENTRY glGetBufferSubDataARB (GLenum target, GLintptrARB offset, GLsizeiptrARB size, GLvoid *data);
-GLAPI GLvoid* APIENTRY glMapBufferARB (GLenum target, GLenum access);
-GLAPI GLboolean APIENTRY glUnmapBufferARB (GLenum target);
-GLAPI void APIENTRY glGetBufferParameterivARB (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetBufferPointervARB (GLenum target, GLenum pname, GLvoid* *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDBUFFERARBPROC) (GLenum target, GLuint buffer);
-typedef void (APIENTRYP PFNGLDELETEBUFFERSARBPROC) (GLsizei n, const GLuint *buffers);
-typedef void (APIENTRYP PFNGLGENBUFFERSARBPROC) (GLsizei n, GLuint *buffers);
-typedef GLboolean (APIENTRYP PFNGLISBUFFERARBPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLBUFFERDATAARBPROC) (GLenum target, GLsizeiptrARB size, const GLvoid *data, GLenum usage);
-typedef void (APIENTRYP PFNGLBUFFERSUBDATAARBPROC) (GLenum target, GLintptrARB offset, GLsizeiptrARB size, const GLvoid *data);
-typedef void (APIENTRYP PFNGLGETBUFFERSUBDATAARBPROC) (GLenum target, GLintptrARB offset, GLsizeiptrARB size, GLvoid *data);
-typedef GLvoid* (APIENTRYP PFNGLMAPBUFFERARBPROC) (GLenum target, GLenum access);
-typedef GLboolean (APIENTRYP PFNGLUNMAPBUFFERARBPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERIVARBPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETBUFFERPOINTERVARBPROC) (GLenum target, GLenum pname, GLvoid* *params);
-#endif
-
-#ifndef GL_ARB_occlusion_query
-#define GL_ARB_occlusion_query 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGenQueriesARB (GLsizei n, GLuint *ids);
-GLAPI void APIENTRY glDeleteQueriesARB (GLsizei n, const GLuint *ids);
-GLAPI GLboolean APIENTRY glIsQueryARB (GLuint id);
-GLAPI void APIENTRY glBeginQueryARB (GLenum target, GLuint id);
-GLAPI void APIENTRY glEndQueryARB (GLenum target);
-GLAPI void APIENTRY glGetQueryivARB (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetQueryObjectivARB (GLuint id, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetQueryObjectuivARB (GLuint id, GLenum pname, GLuint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGENQUERIESARBPROC) (GLsizei n, GLuint *ids);
-typedef void (APIENTRYP PFNGLDELETEQUERIESARBPROC) (GLsizei n, const GLuint *ids);
-typedef GLboolean (APIENTRYP PFNGLISQUERYARBPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLBEGINQUERYARBPROC) (GLenum target, GLuint id);
-typedef void (APIENTRYP PFNGLENDQUERYARBPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLGETQUERYIVARBPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTIVARBPROC) (GLuint id, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTUIVARBPROC) (GLuint id, GLenum pname, GLuint *params);
-#endif
-
-#ifndef GL_ARB_shader_objects
-#define GL_ARB_shader_objects 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDeleteObjectARB (GLhandleARB obj);
-GLAPI GLhandleARB APIENTRY glGetHandleARB (GLenum pname);
-GLAPI void APIENTRY glDetachObjectARB (GLhandleARB containerObj, GLhandleARB attachedObj);
-GLAPI GLhandleARB APIENTRY glCreateShaderObjectARB (GLenum shaderType);
-GLAPI void APIENTRY glShaderSourceARB (GLhandleARB shaderObj, GLsizei count, const GLcharARB* *string, const GLint *length);
-GLAPI void APIENTRY glCompileShaderARB (GLhandleARB shaderObj);
-GLAPI GLhandleARB APIENTRY glCreateProgramObjectARB (void);
-GLAPI void APIENTRY glAttachObjectARB (GLhandleARB containerObj, GLhandleARB obj);
-GLAPI void APIENTRY glLinkProgramARB (GLhandleARB programObj);
-GLAPI void APIENTRY glUseProgramObjectARB (GLhandleARB programObj);
-GLAPI void APIENTRY glValidateProgramARB (GLhandleARB programObj);
-GLAPI void APIENTRY glUniform1fARB (GLint location, GLfloat v0);
-GLAPI void APIENTRY glUniform2fARB (GLint location, GLfloat v0, GLfloat v1);
-GLAPI void APIENTRY glUniform3fARB (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-GLAPI void APIENTRY glUniform4fARB (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-GLAPI void APIENTRY glUniform1iARB (GLint location, GLint v0);
-GLAPI void APIENTRY glUniform2iARB (GLint location, GLint v0, GLint v1);
-GLAPI void APIENTRY glUniform3iARB (GLint location, GLint v0, GLint v1, GLint v2);
-GLAPI void APIENTRY glUniform4iARB (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-GLAPI void APIENTRY glUniform1fvARB (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform2fvARB (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform3fvARB (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform4fvARB (GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glUniform1ivARB (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniform2ivARB (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniform3ivARB (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniform4ivARB (GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glUniformMatrix2fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix3fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glUniformMatrix4fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glGetObjectParameterfvARB (GLhandleARB obj, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetObjectParameterivARB (GLhandleARB obj, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetInfoLogARB (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *infoLog);
-GLAPI void APIENTRY glGetAttachedObjectsARB (GLhandleARB containerObj, GLsizei maxCount, GLsizei *count, GLhandleARB *obj);
-GLAPI GLint APIENTRY glGetUniformLocationARB (GLhandleARB programObj, const GLcharARB *name);
-GLAPI void APIENTRY glGetActiveUniformARB (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
-GLAPI void APIENTRY glGetUniformfvARB (GLhandleARB programObj, GLint location, GLfloat *params);
-GLAPI void APIENTRY glGetUniformivARB (GLhandleARB programObj, GLint location, GLint *params);
-GLAPI void APIENTRY glGetShaderSourceARB (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *source);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDELETEOBJECTARBPROC) (GLhandleARB obj);
-typedef GLhandleARB (APIENTRYP PFNGLGETHANDLEARBPROC) (GLenum pname);
-typedef void (APIENTRYP PFNGLDETACHOBJECTARBPROC) (GLhandleARB containerObj, GLhandleARB attachedObj);
-typedef GLhandleARB (APIENTRYP PFNGLCREATESHADEROBJECTARBPROC) (GLenum shaderType);
-typedef void (APIENTRYP PFNGLSHADERSOURCEARBPROC) (GLhandleARB shaderObj, GLsizei count, const GLcharARB* *string, const GLint *length);
-typedef void (APIENTRYP PFNGLCOMPILESHADERARBPROC) (GLhandleARB shaderObj);
-typedef GLhandleARB (APIENTRYP PFNGLCREATEPROGRAMOBJECTARBPROC) (void);
-typedef void (APIENTRYP PFNGLATTACHOBJECTARBPROC) (GLhandleARB containerObj, GLhandleARB obj);
-typedef void (APIENTRYP PFNGLLINKPROGRAMARBPROC) (GLhandleARB programObj);
-typedef void (APIENTRYP PFNGLUSEPROGRAMOBJECTARBPROC) (GLhandleARB programObj);
-typedef void (APIENTRYP PFNGLVALIDATEPROGRAMARBPROC) (GLhandleARB programObj);
-typedef void (APIENTRYP PFNGLUNIFORM1FARBPROC) (GLint location, GLfloat v0);
-typedef void (APIENTRYP PFNGLUNIFORM2FARBPROC) (GLint location, GLfloat v0, GLfloat v1);
-typedef void (APIENTRYP PFNGLUNIFORM3FARBPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-typedef void (APIENTRYP PFNGLUNIFORM4FARBPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-typedef void (APIENTRYP PFNGLUNIFORM1IARBPROC) (GLint location, GLint v0);
-typedef void (APIENTRYP PFNGLUNIFORM2IARBPROC) (GLint location, GLint v0, GLint v1);
-typedef void (APIENTRYP PFNGLUNIFORM3IARBPROC) (GLint location, GLint v0, GLint v1, GLint v2);
-typedef void (APIENTRYP PFNGLUNIFORM4IARBPROC) (GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-typedef void (APIENTRYP PFNGLUNIFORM1FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM2FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM3FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM4FVARBPROC) (GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORM1IVARBPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORM2IVARBPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORM3IVARBPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORM4IVARBPROC) (GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERFVARBPROC) (GLhandleARB obj, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERIVARBPROC) (GLhandleARB obj, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETINFOLOGARBPROC) (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *infoLog);
-typedef void (APIENTRYP PFNGLGETATTACHEDOBJECTSARBPROC) (GLhandleARB containerObj, GLsizei maxCount, GLsizei *count, GLhandleARB *obj);
-typedef GLint (APIENTRYP PFNGLGETUNIFORMLOCATIONARBPROC) (GLhandleARB programObj, const GLcharARB *name);
-typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMARBPROC) (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
-typedef void (APIENTRYP PFNGLGETUNIFORMFVARBPROC) (GLhandleARB programObj, GLint location, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETUNIFORMIVARBPROC) (GLhandleARB programObj, GLint location, GLint *params);
-typedef void (APIENTRYP PFNGLGETSHADERSOURCEARBPROC) (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *source);
-#endif
-
-#ifndef GL_ARB_vertex_shader
-#define GL_ARB_vertex_shader 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindAttribLocationARB (GLhandleARB programObj, GLuint index, const GLcharARB *name);
-GLAPI void APIENTRY glGetActiveAttribARB (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
-GLAPI GLint APIENTRY glGetAttribLocationARB (GLhandleARB programObj, const GLcharARB *name);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDATTRIBLOCATIONARBPROC) (GLhandleARB programObj, GLuint index, const GLcharARB *name);
-typedef void (APIENTRYP PFNGLGETACTIVEATTRIBARBPROC) (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name);
-typedef GLint (APIENTRYP PFNGLGETATTRIBLOCATIONARBPROC) (GLhandleARB programObj, const GLcharARB *name);
-#endif
-
-#ifndef GL_ARB_fragment_shader
-#define GL_ARB_fragment_shader 1
-#endif
-
-#ifndef GL_ARB_shading_language_100
-#define GL_ARB_shading_language_100 1
-#endif
-
-#ifndef GL_ARB_texture_non_power_of_two
-#define GL_ARB_texture_non_power_of_two 1
-#endif
-
-#ifndef GL_ARB_point_sprite
-#define GL_ARB_point_sprite 1
-#endif
-
-#ifndef GL_ARB_fragment_program_shadow
-#define GL_ARB_fragment_program_shadow 1
-#endif
-
-#ifndef GL_ARB_draw_buffers
-#define GL_ARB_draw_buffers 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawBuffersARB (GLsizei n, const GLenum *bufs);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWBUFFERSARBPROC) (GLsizei n, const GLenum *bufs);
-#endif
-
-#ifndef GL_ARB_texture_rectangle
-#define GL_ARB_texture_rectangle 1
-#endif
-
-#ifndef GL_ARB_color_buffer_float
-#define GL_ARB_color_buffer_float 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glClampColorARB (GLenum target, GLenum clamp);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCLAMPCOLORARBPROC) (GLenum target, GLenum clamp);
-#endif
-
-#ifndef GL_ARB_half_float_pixel
-#define GL_ARB_half_float_pixel 1
-#endif
-
-#ifndef GL_ARB_texture_float
-#define GL_ARB_texture_float 1
-#endif
-
-#ifndef GL_ARB_pixel_buffer_object
-#define GL_ARB_pixel_buffer_object 1
-#endif
-
-#ifndef GL_ARB_depth_buffer_float
-#define GL_ARB_depth_buffer_float 1
-#endif
-
-#ifndef GL_ARB_draw_instanced
-#define GL_ARB_draw_instanced 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawArraysInstancedARB (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-GLAPI void APIENTRY glDrawElementsInstancedARB (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDARBPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDARBPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
-#endif
-
-#ifndef GL_ARB_framebuffer_object
-#define GL_ARB_framebuffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLboolean APIENTRY glIsRenderbuffer (GLuint renderbuffer);
-GLAPI void APIENTRY glBindRenderbuffer (GLenum target, GLuint renderbuffer);
-GLAPI void APIENTRY glDeleteRenderbuffers (GLsizei n, const GLuint *renderbuffers);
-GLAPI void APIENTRY glGenRenderbuffers (GLsizei n, GLuint *renderbuffers);
-GLAPI void APIENTRY glRenderbufferStorage (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetRenderbufferParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI GLboolean APIENTRY glIsFramebuffer (GLuint framebuffer);
-GLAPI void APIENTRY glBindFramebuffer (GLenum target, GLuint framebuffer);
-GLAPI void APIENTRY glDeleteFramebuffers (GLsizei n, const GLuint *framebuffers);
-GLAPI void APIENTRY glGenFramebuffers (GLsizei n, GLuint *framebuffers);
-GLAPI GLenum APIENTRY glCheckFramebufferStatus (GLenum target);
-GLAPI void APIENTRY glFramebufferTexture1D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-GLAPI void APIENTRY glFramebufferTexture2D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-GLAPI void APIENTRY glFramebufferTexture3D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-GLAPI void APIENTRY glFramebufferRenderbuffer (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
-GLAPI void APIENTRY glGetFramebufferAttachmentParameteriv (GLenum target, GLenum attachment, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGenerateMipmap (GLenum target);
-GLAPI void APIENTRY glBlitFramebuffer (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-GLAPI void APIENTRY glRenderbufferStorageMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glFramebufferTextureLayer (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLboolean (APIENTRYP PFNGLISRENDERBUFFERPROC) (GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLBINDRENDERBUFFERPROC) (GLenum target, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLDELETERENDERBUFFERSPROC) (GLsizei n, const GLuint *renderbuffers);
-typedef void (APIENTRYP PFNGLGENRENDERBUFFERSPROC) (GLsizei n, GLuint *renderbuffers);
-typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETRENDERBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef GLboolean (APIENTRYP PFNGLISFRAMEBUFFERPROC) (GLuint framebuffer);
-typedef void (APIENTRYP PFNGLBINDFRAMEBUFFERPROC) (GLenum target, GLuint framebuffer);
-typedef void (APIENTRYP PFNGLDELETEFRAMEBUFFERSPROC) (GLsizei n, const GLuint *framebuffers);
-typedef void (APIENTRYP PFNGLGENFRAMEBUFFERSPROC) (GLsizei n, GLuint *framebuffers);
-typedef GLenum (APIENTRYP PFNGLCHECKFRAMEBUFFERSTATUSPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE1DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERRENDERBUFFERPROC) (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLGETFRAMEBUFFERATTACHMENTPARAMETERIVPROC) (GLenum target, GLenum attachment, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGENERATEMIPMAPPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLBLITFRAMEBUFFERPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYERPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
-#endif
-
-#ifndef GL_ARB_framebuffer_sRGB
-#define GL_ARB_framebuffer_sRGB 1
-#endif
-
-#ifndef GL_ARB_geometry_shader4
-#define GL_ARB_geometry_shader4 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramParameteriARB (GLuint program, GLenum pname, GLint value);
-GLAPI void APIENTRY glFramebufferTextureARB (GLenum target, GLenum attachment, GLuint texture, GLint level);
-GLAPI void APIENTRY glFramebufferTextureLayerARB (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
-GLAPI void APIENTRY glFramebufferTextureFaceARB (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIARBPROC) (GLuint program, GLenum pname, GLint value);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYERARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREFACEARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
-#endif
-
-#ifndef GL_ARB_half_float_vertex
-#define GL_ARB_half_float_vertex 1
-#endif
-
-#ifndef GL_ARB_instanced_arrays
-#define GL_ARB_instanced_arrays 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttribDivisorARB (GLuint index, GLuint divisor);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBDIVISORARBPROC) (GLuint index, GLuint divisor);
-#endif
-
-#ifndef GL_ARB_map_buffer_range
-#define GL_ARB_map_buffer_range 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLvoid* APIENTRY glMapBufferRange (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
-GLAPI void APIENTRY glFlushMappedBufferRange (GLenum target, GLintptr offset, GLsizeiptr length);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLvoid* (APIENTRYP PFNGLMAPBUFFERRANGEPROC) (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access);
-typedef void (APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEPROC) (GLenum target, GLintptr offset, GLsizeiptr length);
-#endif
-
-#ifndef GL_ARB_texture_buffer_object
-#define GL_ARB_texture_buffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexBufferARB (GLenum target, GLenum internalformat, GLuint buffer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXBUFFERARBPROC) (GLenum target, GLenum internalformat, GLuint buffer);
-#endif
-
-#ifndef GL_ARB_texture_compression_rgtc
-#define GL_ARB_texture_compression_rgtc 1
-#endif
-
-#ifndef GL_ARB_texture_rg
-#define GL_ARB_texture_rg 1
-#endif
-
-#ifndef GL_ARB_vertex_array_object
-#define GL_ARB_vertex_array_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindVertexArray (GLuint array);
-GLAPI void APIENTRY glDeleteVertexArrays (GLsizei n, const GLuint *arrays);
-GLAPI void APIENTRY glGenVertexArrays (GLsizei n, GLuint *arrays);
-GLAPI GLboolean APIENTRY glIsVertexArray (GLuint array);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDVERTEXARRAYPROC) (GLuint array);
-typedef void (APIENTRYP PFNGLDELETEVERTEXARRAYSPROC) (GLsizei n, const GLuint *arrays);
-typedef void (APIENTRYP PFNGLGENVERTEXARRAYSPROC) (GLsizei n, GLuint *arrays);
-typedef GLboolean (APIENTRYP PFNGLISVERTEXARRAYPROC) (GLuint array);
-#endif
-
-#ifndef GL_ARB_uniform_buffer_object
-#define GL_ARB_uniform_buffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetUniformIndices (GLuint program, GLsizei uniformCount, const GLchar* const *uniformNames, GLuint *uniformIndices);
-GLAPI void APIENTRY glGetActiveUniformsiv (GLuint program, GLsizei uniformCount, const GLuint *uniformIndices, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetActiveUniformName (GLuint program, GLuint uniformIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformName);
-GLAPI GLuint APIENTRY glGetUniformBlockIndex (GLuint program, const GLchar *uniformBlockName);
-GLAPI void APIENTRY glGetActiveUniformBlockiv (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetActiveUniformBlockName (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName);
-GLAPI void APIENTRY glUniformBlockBinding (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETUNIFORMINDICESPROC) (GLuint program, GLsizei uniformCount, const GLchar* const *uniformNames, GLuint *uniformIndices);
-typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMSIVPROC) (GLuint program, GLsizei uniformCount, const GLuint *uniformIndices, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMNAMEPROC) (GLuint program, GLuint uniformIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformName);
-typedef GLuint (APIENTRYP PFNGLGETUNIFORMBLOCKINDEXPROC) (GLuint program, const GLchar *uniformBlockName);
-typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMBLOCKIVPROC) (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMBLOCKNAMEPROC) (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName);
-typedef void (APIENTRYP PFNGLUNIFORMBLOCKBINDINGPROC) (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding);
-#endif
-
-#ifndef GL_ARB_compatibility
-#define GL_ARB_compatibility 1
-#endif
-
-#ifndef GL_ARB_copy_buffer
-#define GL_ARB_copy_buffer 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCopyBufferSubData (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOPYBUFFERSUBDATAPROC) (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
-#endif
-
-#ifndef GL_ARB_shader_texture_lod
-#define GL_ARB_shader_texture_lod 1
-#endif
-
-#ifndef GL_ARB_depth_clamp
-#define GL_ARB_depth_clamp 1
-#endif
-
-#ifndef GL_ARB_draw_elements_base_vertex
-#define GL_ARB_draw_elements_base_vertex 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawElementsBaseVertex (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex);
-GLAPI void APIENTRY glDrawRangeElementsBaseVertex (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex);
-GLAPI void APIENTRY glDrawElementsInstancedBaseVertex (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei instancecount, GLint basevertex);
-GLAPI void APIENTRY glMultiDrawElementsBaseVertex (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei drawcount, const GLint *basevertex);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWELEMENTSBASEVERTEXPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex);
-typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSBASEVERTEXPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEVERTEXPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei instancecount, GLint basevertex);
-typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSBASEVERTEXPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei drawcount, const GLint *basevertex);
-#endif
-
-#ifndef GL_ARB_fragment_coord_conventions
-#define GL_ARB_fragment_coord_conventions 1
-#endif
-
-#ifndef GL_ARB_provoking_vertex
-#define GL_ARB_provoking_vertex 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProvokingVertex (GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROVOKINGVERTEXPROC) (GLenum mode);
-#endif
-
-#ifndef GL_ARB_seamless_cube_map
-#define GL_ARB_seamless_cube_map 1
-#endif
-
-#ifndef GL_ARB_sync
-#define GL_ARB_sync 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLsync APIENTRY glFenceSync (GLenum condition, GLbitfield flags);
-GLAPI GLboolean APIENTRY glIsSync (GLsync sync);
-GLAPI void APIENTRY glDeleteSync (GLsync sync);
-GLAPI GLenum APIENTRY glClientWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout);
-GLAPI void APIENTRY glWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout);
-GLAPI void APIENTRY glGetInteger64v (GLenum pname, GLint64 *params);
-GLAPI void APIENTRY glGetSynciv (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLsync (APIENTRYP PFNGLFENCESYNCPROC) (GLenum condition, GLbitfield flags);
-typedef GLboolean (APIENTRYP PFNGLISSYNCPROC) (GLsync sync);
-typedef void (APIENTRYP PFNGLDELETESYNCPROC) (GLsync sync);
-typedef GLenum (APIENTRYP PFNGLCLIENTWAITSYNCPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
-typedef void (APIENTRYP PFNGLWAITSYNCPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout);
-typedef void (APIENTRYP PFNGLGETINTEGER64VPROC) (GLenum pname, GLint64 *params);
-typedef void (APIENTRYP PFNGLGETSYNCIVPROC) (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
-#endif
-
-#ifndef GL_ARB_texture_multisample
-#define GL_ARB_texture_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexImage2DMultisample (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
-GLAPI void APIENTRY glTexImage3DMultisample (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
-GLAPI void APIENTRY glGetMultisamplefv (GLenum pname, GLuint index, GLfloat *val);
-GLAPI void APIENTRY glSampleMaski (GLuint index, GLbitfield mask);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXIMAGE2DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
-typedef void (APIENTRYP PFNGLTEXIMAGE3DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
-typedef void (APIENTRYP PFNGLGETMULTISAMPLEFVPROC) (GLenum pname, GLuint index, GLfloat *val);
-typedef void (APIENTRYP PFNGLSAMPLEMASKIPROC) (GLuint index, GLbitfield mask);
-#endif
-
-#ifndef GL_ARB_vertex_array_bgra
-#define GL_ARB_vertex_array_bgra 1
-#endif
-
-#ifndef GL_ARB_draw_buffers_blend
-#define GL_ARB_draw_buffers_blend 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendEquationiARB (GLuint buf, GLenum mode);
-GLAPI void APIENTRY glBlendEquationSeparateiARB (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
-GLAPI void APIENTRY glBlendFunciARB (GLuint buf, GLenum src, GLenum dst);
-GLAPI void APIENTRY glBlendFuncSeparateiARB (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDEQUATIONIARBPROC) (GLuint buf, GLenum mode);
-typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEIARBPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
-typedef void (APIENTRYP PFNGLBLENDFUNCIARBPROC) (GLuint buf, GLenum src, GLenum dst);
-typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEIARBPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
-#endif
-
-#ifndef GL_ARB_sample_shading
-#define GL_ARB_sample_shading 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMinSampleShadingARB (GLfloat value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMINSAMPLESHADINGARBPROC) (GLfloat value);
-#endif
-
-#ifndef GL_ARB_texture_cube_map_array
-#define GL_ARB_texture_cube_map_array 1
-#endif
-
-#ifndef GL_ARB_texture_gather
-#define GL_ARB_texture_gather 1
-#endif
-
-#ifndef GL_ARB_texture_query_lod
-#define GL_ARB_texture_query_lod 1
-#endif
-
-#ifndef GL_ARB_shading_language_include
-#define GL_ARB_shading_language_include 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glNamedStringARB (GLenum type, GLint namelen, const GLchar *name, GLint stringlen, const GLchar *string);
-GLAPI void APIENTRY glDeleteNamedStringARB (GLint namelen, const GLchar *name);
-GLAPI void APIENTRY glCompileShaderIncludeARB (GLuint shader, GLsizei count, const GLchar* *path, const GLint *length);
-GLAPI GLboolean APIENTRY glIsNamedStringARB (GLint namelen, const GLchar *name);
-GLAPI void APIENTRY glGetNamedStringARB (GLint namelen, const GLchar *name, GLsizei bufSize, GLint *stringlen, GLchar *string);
-GLAPI void APIENTRY glGetNamedStringivARB (GLint namelen, const GLchar *name, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLNAMEDSTRINGARBPROC) (GLenum type, GLint namelen, const GLchar *name, GLint stringlen, const GLchar *string);
-typedef void (APIENTRYP PFNGLDELETENAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name);
-typedef void (APIENTRYP PFNGLCOMPILESHADERINCLUDEARBPROC) (GLuint shader, GLsizei count, const GLchar* *path, const GLint *length);
-typedef GLboolean (APIENTRYP PFNGLISNAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name);
-typedef void (APIENTRYP PFNGLGETNAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name, GLsizei bufSize, GLint *stringlen, GLchar *string);
-typedef void (APIENTRYP PFNGLGETNAMEDSTRINGIVARBPROC) (GLint namelen, const GLchar *name, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_ARB_texture_compression_bptc
-#define GL_ARB_texture_compression_bptc 1
-#endif
-
-#ifndef GL_ARB_blend_func_extended
-#define GL_ARB_blend_func_extended 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindFragDataLocationIndexed (GLuint program, GLuint colorNumber, GLuint index, const GLchar *name);
-GLAPI GLint APIENTRY glGetFragDataIndex (GLuint program, const GLchar *name);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONINDEXEDPROC) (GLuint program, GLuint colorNumber, GLuint index, const GLchar *name);
-typedef GLint (APIENTRYP PFNGLGETFRAGDATAINDEXPROC) (GLuint program, const GLchar *name);
-#endif
-
-#ifndef GL_ARB_explicit_attrib_location
-#define GL_ARB_explicit_attrib_location 1
-#endif
-
-#ifndef GL_ARB_occlusion_query2
-#define GL_ARB_occlusion_query2 1
-#endif
-
-#ifndef GL_ARB_sampler_objects
-#define GL_ARB_sampler_objects 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGenSamplers (GLsizei count, GLuint *samplers);
-GLAPI void APIENTRY glDeleteSamplers (GLsizei count, const GLuint *samplers);
-GLAPI GLboolean APIENTRY glIsSampler (GLuint sampler);
-GLAPI void APIENTRY glBindSampler (GLuint unit, GLuint sampler);
-GLAPI void APIENTRY glSamplerParameteri (GLuint sampler, GLenum pname, GLint param);
-GLAPI void APIENTRY glSamplerParameteriv (GLuint sampler, GLenum pname, const GLint *param);
-GLAPI void APIENTRY glSamplerParameterf (GLuint sampler, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glSamplerParameterfv (GLuint sampler, GLenum pname, const GLfloat *param);
-GLAPI void APIENTRY glSamplerParameterIiv (GLuint sampler, GLenum pname, const GLint *param);
-GLAPI void APIENTRY glSamplerParameterIuiv (GLuint sampler, GLenum pname, const GLuint *param);
-GLAPI void APIENTRY glGetSamplerParameteriv (GLuint sampler, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetSamplerParameterIiv (GLuint sampler, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetSamplerParameterfv (GLuint sampler, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetSamplerParameterIuiv (GLuint sampler, GLenum pname, GLuint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGENSAMPLERSPROC) (GLsizei count, GLuint *samplers);
-typedef void (APIENTRYP PFNGLDELETESAMPLERSPROC) (GLsizei count, const GLuint *samplers);
-typedef GLboolean (APIENTRYP PFNGLISSAMPLERPROC) (GLuint sampler);
-typedef void (APIENTRYP PFNGLBINDSAMPLERPROC) (GLuint unit, GLuint sampler);
-typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIPROC) (GLuint sampler, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIVPROC) (GLuint sampler, GLenum pname, const GLint *param);
-typedef void (APIENTRYP PFNGLSAMPLERPARAMETERFPROC) (GLuint sampler, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLSAMPLERPARAMETERFVPROC) (GLuint sampler, GLenum pname, const GLfloat *param);
-typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIIVPROC) (GLuint sampler, GLenum pname, const GLint *param);
-typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIUIVPROC) (GLuint sampler, GLenum pname, const GLuint *param);
-typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIVPROC) (GLuint sampler, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIIVPROC) (GLuint sampler, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERFVPROC) (GLuint sampler, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIUIVPROC) (GLuint sampler, GLenum pname, GLuint *params);
-#endif
-
-#ifndef GL_ARB_shader_bit_encoding
-#define GL_ARB_shader_bit_encoding 1
-#endif
-
-#ifndef GL_ARB_texture_rgb10_a2ui
-#define GL_ARB_texture_rgb10_a2ui 1
-#endif
-
-#ifndef GL_ARB_texture_swizzle
-#define GL_ARB_texture_swizzle 1
-#endif
-
-#ifndef GL_ARB_timer_query
-#define GL_ARB_timer_query 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glQueryCounter (GLuint id, GLenum target);
-GLAPI void APIENTRY glGetQueryObjecti64v (GLuint id, GLenum pname, GLint64 *params);
-GLAPI void APIENTRY glGetQueryObjectui64v (GLuint id, GLenum pname, GLuint64 *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLQUERYCOUNTERPROC) (GLuint id, GLenum target);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTI64VPROC) (GLuint id, GLenum pname, GLint64 *params);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTUI64VPROC) (GLuint id, GLenum pname, GLuint64 *params);
-#endif
-
-#ifndef GL_ARB_vertex_type_2_10_10_10_rev
-#define GL_ARB_vertex_type_2_10_10_10_rev 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexP2ui (GLenum type, GLuint value);
-GLAPI void APIENTRY glVertexP2uiv (GLenum type, const GLuint *value);
-GLAPI void APIENTRY glVertexP3ui (GLenum type, GLuint value);
-GLAPI void APIENTRY glVertexP3uiv (GLenum type, const GLuint *value);
-GLAPI void APIENTRY glVertexP4ui (GLenum type, GLuint value);
-GLAPI void APIENTRY glVertexP4uiv (GLenum type, const GLuint *value);
-GLAPI void APIENTRY glTexCoordP1ui (GLenum type, GLuint coords);
-GLAPI void APIENTRY glTexCoordP1uiv (GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glTexCoordP2ui (GLenum type, GLuint coords);
-GLAPI void APIENTRY glTexCoordP2uiv (GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glTexCoordP3ui (GLenum type, GLuint coords);
-GLAPI void APIENTRY glTexCoordP3uiv (GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glTexCoordP4ui (GLenum type, GLuint coords);
-GLAPI void APIENTRY glTexCoordP4uiv (GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glMultiTexCoordP1ui (GLenum texture, GLenum type, GLuint coords);
-GLAPI void APIENTRY glMultiTexCoordP1uiv (GLenum texture, GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glMultiTexCoordP2ui (GLenum texture, GLenum type, GLuint coords);
-GLAPI void APIENTRY glMultiTexCoordP2uiv (GLenum texture, GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glMultiTexCoordP3ui (GLenum texture, GLenum type, GLuint coords);
-GLAPI void APIENTRY glMultiTexCoordP3uiv (GLenum texture, GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glMultiTexCoordP4ui (GLenum texture, GLenum type, GLuint coords);
-GLAPI void APIENTRY glMultiTexCoordP4uiv (GLenum texture, GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glNormalP3ui (GLenum type, GLuint coords);
-GLAPI void APIENTRY glNormalP3uiv (GLenum type, const GLuint *coords);
-GLAPI void APIENTRY glColorP3ui (GLenum type, GLuint color);
-GLAPI void APIENTRY glColorP3uiv (GLenum type, const GLuint *color);
-GLAPI void APIENTRY glColorP4ui (GLenum type, GLuint color);
-GLAPI void APIENTRY glColorP4uiv (GLenum type, const GLuint *color);
-GLAPI void APIENTRY glSecondaryColorP3ui (GLenum type, GLuint color);
-GLAPI void APIENTRY glSecondaryColorP3uiv (GLenum type, const GLuint *color);
-GLAPI void APIENTRY glVertexAttribP1ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-GLAPI void APIENTRY glVertexAttribP1uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-GLAPI void APIENTRY glVertexAttribP2ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-GLAPI void APIENTRY glVertexAttribP2uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-GLAPI void APIENTRY glVertexAttribP3ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-GLAPI void APIENTRY glVertexAttribP3uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-GLAPI void APIENTRY glVertexAttribP4ui (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-GLAPI void APIENTRY glVertexAttribP4uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXP2UIPROC) (GLenum type, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXP2UIVPROC) (GLenum type, const GLuint *value);
-typedef void (APIENTRYP PFNGLVERTEXP3UIPROC) (GLenum type, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXP3UIVPROC) (GLenum type, const GLuint *value);
-typedef void (APIENTRYP PFNGLVERTEXP4UIPROC) (GLenum type, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXP4UIVPROC) (GLenum type, const GLuint *value);
-typedef void (APIENTRYP PFNGLTEXCOORDP1UIPROC) (GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP1UIVPROC) (GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP2UIPROC) (GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP2UIVPROC) (GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP3UIPROC) (GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP3UIVPROC) (GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP4UIPROC) (GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLTEXCOORDP4UIVPROC) (GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP1UIPROC) (GLenum texture, GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP1UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP2UIPROC) (GLenum texture, GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP2UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP3UIPROC) (GLenum texture, GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP3UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP4UIPROC) (GLenum texture, GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDP4UIVPROC) (GLenum texture, GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLNORMALP3UIPROC) (GLenum type, GLuint coords);
-typedef void (APIENTRYP PFNGLNORMALP3UIVPROC) (GLenum type, const GLuint *coords);
-typedef void (APIENTRYP PFNGLCOLORP3UIPROC) (GLenum type, GLuint color);
-typedef void (APIENTRYP PFNGLCOLORP3UIVPROC) (GLenum type, const GLuint *color);
-typedef void (APIENTRYP PFNGLCOLORP4UIPROC) (GLenum type, GLuint color);
-typedef void (APIENTRYP PFNGLCOLORP4UIVPROC) (GLenum type, const GLuint *color);
-typedef void (APIENTRYP PFNGLSECONDARYCOLORP3UIPROC) (GLenum type, GLuint color);
-typedef void (APIENTRYP PFNGLSECONDARYCOLORP3UIVPROC) (GLenum type, const GLuint *color);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP1UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP1UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP2UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP2UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP3UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP3UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP4UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBP4UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value);
-#endif
-
-#ifndef GL_ARB_draw_indirect
-#define GL_ARB_draw_indirect 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawArraysIndirect (GLenum mode, const GLvoid *indirect);
-GLAPI void APIENTRY glDrawElementsIndirect (GLenum mode, GLenum type, const GLvoid *indirect);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWARRAYSINDIRECTPROC) (GLenum mode, const GLvoid *indirect);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINDIRECTPROC) (GLenum mode, GLenum type, const GLvoid *indirect);
-#endif
-
-#ifndef GL_ARB_gpu_shader5
-#define GL_ARB_gpu_shader5 1
-#endif
-
-#ifndef GL_ARB_gpu_shader_fp64
-#define GL_ARB_gpu_shader_fp64 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glUniform1d (GLint location, GLdouble x);
-GLAPI void APIENTRY glUniform2d (GLint location, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glUniform3d (GLint location, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glUniform4d (GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glUniform1dv (GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glUniform2dv (GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glUniform3dv (GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glUniform4dv (GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix2x3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix2x4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix3x2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix3x4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix4x2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glUniformMatrix4x3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glGetUniformdv (GLuint program, GLint location, GLdouble *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLUNIFORM1DPROC) (GLint location, GLdouble x);
-typedef void (APIENTRYP PFNGLUNIFORM2DPROC) (GLint location, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLUNIFORM3DPROC) (GLint location, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLUNIFORM4DPROC) (GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLUNIFORM1DVPROC) (GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORM2DVPROC) (GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORM3DVPROC) (GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORM4DVPROC) (GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLGETUNIFORMDVPROC) (GLuint program, GLint location, GLdouble *params);
-#endif
-
-#ifndef GL_ARB_shader_subroutine
-#define GL_ARB_shader_subroutine 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLint APIENTRY glGetSubroutineUniformLocation (GLuint program, GLenum shadertype, const GLchar *name);
-GLAPI GLuint APIENTRY glGetSubroutineIndex (GLuint program, GLenum shadertype, const GLchar *name);
-GLAPI void APIENTRY glGetActiveSubroutineUniformiv (GLuint program, GLenum shadertype, GLuint index, GLenum pname, GLint *values);
-GLAPI void APIENTRY glGetActiveSubroutineUniformName (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
-GLAPI void APIENTRY glGetActiveSubroutineName (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
-GLAPI void APIENTRY glUniformSubroutinesuiv (GLenum shadertype, GLsizei count, const GLuint *indices);
-GLAPI void APIENTRY glGetUniformSubroutineuiv (GLenum shadertype, GLint location, GLuint *params);
-GLAPI void APIENTRY glGetProgramStageiv (GLuint program, GLenum shadertype, GLenum pname, GLint *values);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLint (APIENTRYP PFNGLGETSUBROUTINEUNIFORMLOCATIONPROC) (GLuint program, GLenum shadertype, const GLchar *name);
-typedef GLuint (APIENTRYP PFNGLGETSUBROUTINEINDEXPROC) (GLuint program, GLenum shadertype, const GLchar *name);
-typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINEUNIFORMIVPROC) (GLuint program, GLenum shadertype, GLuint index, GLenum pname, GLint *values);
-typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINEUNIFORMNAMEPROC) (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
-typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINENAMEPROC) (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name);
-typedef void (APIENTRYP PFNGLUNIFORMSUBROUTINESUIVPROC) (GLenum shadertype, GLsizei count, const GLuint *indices);
-typedef void (APIENTRYP PFNGLGETUNIFORMSUBROUTINEUIVPROC) (GLenum shadertype, GLint location, GLuint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMSTAGEIVPROC) (GLuint program, GLenum shadertype, GLenum pname, GLint *values);
-#endif
-
-#ifndef GL_ARB_tessellation_shader
-#define GL_ARB_tessellation_shader 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPatchParameteri (GLenum pname, GLint value);
-GLAPI void APIENTRY glPatchParameterfv (GLenum pname, const GLfloat *values);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPATCHPARAMETERIPROC) (GLenum pname, GLint value);
-typedef void (APIENTRYP PFNGLPATCHPARAMETERFVPROC) (GLenum pname, const GLfloat *values);
-#endif
-
-#ifndef GL_ARB_texture_buffer_object_rgb32
-#define GL_ARB_texture_buffer_object_rgb32 1
-#endif
-
-#ifndef GL_ARB_transform_feedback2
-#define GL_ARB_transform_feedback2 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindTransformFeedback (GLenum target, GLuint id);
-GLAPI void APIENTRY glDeleteTransformFeedbacks (GLsizei n, const GLuint *ids);
-GLAPI void APIENTRY glGenTransformFeedbacks (GLsizei n, GLuint *ids);
-GLAPI GLboolean APIENTRY glIsTransformFeedback (GLuint id);
-GLAPI void APIENTRY glPauseTransformFeedback (void);
-GLAPI void APIENTRY glResumeTransformFeedback (void);
-GLAPI void APIENTRY glDrawTransformFeedback (GLenum mode, GLuint id);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDTRANSFORMFEEDBACKPROC) (GLenum target, GLuint id);
-typedef void (APIENTRYP PFNGLDELETETRANSFORMFEEDBACKSPROC) (GLsizei n, const GLuint *ids);
-typedef void (APIENTRYP PFNGLGENTRANSFORMFEEDBACKSPROC) (GLsizei n, GLuint *ids);
-typedef GLboolean (APIENTRYP PFNGLISTRANSFORMFEEDBACKPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLPAUSETRANSFORMFEEDBACKPROC) (void);
-typedef void (APIENTRYP PFNGLRESUMETRANSFORMFEEDBACKPROC) (void);
-typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKPROC) (GLenum mode, GLuint id);
-#endif
-
-#ifndef GL_ARB_transform_feedback3
-#define GL_ARB_transform_feedback3 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawTransformFeedbackStream (GLenum mode, GLuint id, GLuint stream);
-GLAPI void APIENTRY glBeginQueryIndexed (GLenum target, GLuint index, GLuint id);
-GLAPI void APIENTRY glEndQueryIndexed (GLenum target, GLuint index);
-GLAPI void APIENTRY glGetQueryIndexediv (GLenum target, GLuint index, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKSTREAMPROC) (GLenum mode, GLuint id, GLuint stream);
-typedef void (APIENTRYP PFNGLBEGINQUERYINDEXEDPROC) (GLenum target, GLuint index, GLuint id);
-typedef void (APIENTRYP PFNGLENDQUERYINDEXEDPROC) (GLenum target, GLuint index);
-typedef void (APIENTRYP PFNGLGETQUERYINDEXEDIVPROC) (GLenum target, GLuint index, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_ARB_ES2_compatibility
-#define GL_ARB_ES2_compatibility 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glReleaseShaderCompiler (void);
-GLAPI void APIENTRY glShaderBinary (GLsizei count, const GLuint *shaders, GLenum binaryformat, const GLvoid *binary, GLsizei length);
-GLAPI void APIENTRY glGetShaderPrecisionFormat (GLenum shadertype, GLenum precisiontype, GLint *range, GLint *precision);
-GLAPI void APIENTRY glDepthRangef (GLfloat n, GLfloat f);
-GLAPI void APIENTRY glClearDepthf (GLfloat d);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLRELEASESHADERCOMPILERPROC) (void);
-typedef void (APIENTRYP PFNGLSHADERBINARYPROC) (GLsizei count, const GLuint *shaders, GLenum binaryformat, const GLvoid *binary, GLsizei length);
-typedef void (APIENTRYP PFNGLGETSHADERPRECISIONFORMATPROC) (GLenum shadertype, GLenum precisiontype, GLint *range, GLint *precision);
-typedef void (APIENTRYP PFNGLDEPTHRANGEFPROC) (GLfloat n, GLfloat f);
-typedef void (APIENTRYP PFNGLCLEARDEPTHFPROC) (GLfloat d);
-#endif
-
-#ifndef GL_ARB_get_program_binary
-#define GL_ARB_get_program_binary 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetProgramBinary (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, GLvoid *binary);
-GLAPI void APIENTRY glProgramBinary (GLuint program, GLenum binaryFormat, const GLvoid *binary, GLsizei length);
-GLAPI void APIENTRY glProgramParameteri (GLuint program, GLenum pname, GLint value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETPROGRAMBINARYPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, GLvoid *binary);
-typedef void (APIENTRYP PFNGLPROGRAMBINARYPROC) (GLuint program, GLenum binaryFormat, const GLvoid *binary, GLsizei length);
-typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIPROC) (GLuint program, GLenum pname, GLint value);
-#endif
-
-#ifndef GL_ARB_separate_shader_objects
-#define GL_ARB_separate_shader_objects 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glUseProgramStages (GLuint pipeline, GLbitfield stages, GLuint program);
-GLAPI void APIENTRY glActiveShaderProgram (GLuint pipeline, GLuint program);
-GLAPI GLuint APIENTRY glCreateShaderProgramv (GLenum type, GLsizei count, const GLchar* const *strings);
-GLAPI void APIENTRY glBindProgramPipeline (GLuint pipeline);
-GLAPI void APIENTRY glDeleteProgramPipelines (GLsizei n, const GLuint *pipelines);
-GLAPI void APIENTRY glGenProgramPipelines (GLsizei n, GLuint *pipelines);
-GLAPI GLboolean APIENTRY glIsProgramPipeline (GLuint pipeline);
-GLAPI void APIENTRY glGetProgramPipelineiv (GLuint pipeline, GLenum pname, GLint *params);
-GLAPI void APIENTRY glProgramUniform1i (GLuint program, GLint location, GLint v0);
-GLAPI void APIENTRY glProgramUniform1iv (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform1f (GLuint program, GLint location, GLfloat v0);
-GLAPI void APIENTRY glProgramUniform1fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform1d (GLuint program, GLint location, GLdouble v0);
-GLAPI void APIENTRY glProgramUniform1dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform1ui (GLuint program, GLint location, GLuint v0);
-GLAPI void APIENTRY glProgramUniform1uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniform2i (GLuint program, GLint location, GLint v0, GLint v1);
-GLAPI void APIENTRY glProgramUniform2iv (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform2f (GLuint program, GLint location, GLfloat v0, GLfloat v1);
-GLAPI void APIENTRY glProgramUniform2fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform2d (GLuint program, GLint location, GLdouble v0, GLdouble v1);
-GLAPI void APIENTRY glProgramUniform2dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform2ui (GLuint program, GLint location, GLuint v0, GLuint v1);
-GLAPI void APIENTRY glProgramUniform2uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniform3i (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
-GLAPI void APIENTRY glProgramUniform3iv (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform3f (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-GLAPI void APIENTRY glProgramUniform3fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform3d (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2);
-GLAPI void APIENTRY glProgramUniform3dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform3ui (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
-GLAPI void APIENTRY glProgramUniform3uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniform4i (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-GLAPI void APIENTRY glProgramUniform4iv (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform4f (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-GLAPI void APIENTRY glProgramUniform4fv (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform4d (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2, GLdouble v3);
-GLAPI void APIENTRY glProgramUniform4dv (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform4ui (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-GLAPI void APIENTRY glProgramUniform4uiv (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniformMatrix2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glValidateProgramPipeline (GLuint pipeline);
-GLAPI void APIENTRY glGetProgramPipelineInfoLog (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLUSEPROGRAMSTAGESPROC) (GLuint pipeline, GLbitfield stages, GLuint program);
-typedef void (APIENTRYP PFNGLACTIVESHADERPROGRAMPROC) (GLuint pipeline, GLuint program);
-typedef GLuint (APIENTRYP PFNGLCREATESHADERPROGRAMVPROC) (GLenum type, GLsizei count, const GLchar* const *strings);
-typedef void (APIENTRYP PFNGLBINDPROGRAMPIPELINEPROC) (GLuint pipeline);
-typedef void (APIENTRYP PFNGLDELETEPROGRAMPIPELINESPROC) (GLsizei n, const GLuint *pipelines);
-typedef void (APIENTRYP PFNGLGENPROGRAMPIPELINESPROC) (GLsizei n, GLuint *pipelines);
-typedef GLboolean (APIENTRYP PFNGLISPROGRAMPIPELINEPROC) (GLuint pipeline);
-typedef void (APIENTRYP PFNGLGETPROGRAMPIPELINEIVPROC) (GLuint pipeline, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IPROC) (GLuint program, GLint location, GLint v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FPROC) (GLuint program, GLint location, GLfloat v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DPROC) (GLuint program, GLint location, GLdouble v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIPROC) (GLuint program, GLint location, GLuint v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IPROC) (GLuint program, GLint location, GLint v0, GLint v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2, GLdouble v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLVALIDATEPROGRAMPIPELINEPROC) (GLuint pipeline);
-typedef void (APIENTRYP PFNGLGETPROGRAMPIPELINEINFOLOGPROC) (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog);
-#endif
-
-#ifndef GL_ARB_vertex_attrib_64bit
-#define GL_ARB_vertex_attrib_64bit 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttribL1d (GLuint index, GLdouble x);
-GLAPI void APIENTRY glVertexAttribL2d (GLuint index, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glVertexAttribL3d (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glVertexAttribL4d (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glVertexAttribL1dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribL2dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribL3dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribL4dv (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribLPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glGetVertexAttribLdv (GLuint index, GLenum pname, GLdouble *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DPROC) (GLuint index, GLdouble x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DPROC) (GLuint index, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DVPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBLPOINTERPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLDVPROC) (GLuint index, GLenum pname, GLdouble *params);
-#endif
-
-#ifndef GL_ARB_viewport_array
-#define GL_ARB_viewport_array 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glViewportArrayv (GLuint first, GLsizei count, const GLfloat *v);
-GLAPI void APIENTRY glViewportIndexedf (GLuint index, GLfloat x, GLfloat y, GLfloat w, GLfloat h);
-GLAPI void APIENTRY glViewportIndexedfv (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glScissorArrayv (GLuint first, GLsizei count, const GLint *v);
-GLAPI void APIENTRY glScissorIndexed (GLuint index, GLint left, GLint bottom, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glScissorIndexedv (GLuint index, const GLint *v);
-GLAPI void APIENTRY glDepthRangeArrayv (GLuint first, GLsizei count, const GLdouble *v);
-GLAPI void APIENTRY glDepthRangeIndexed (GLuint index, GLdouble n, GLdouble f);
-GLAPI void APIENTRY glGetFloati_v (GLenum target, GLuint index, GLfloat *data);
-GLAPI void APIENTRY glGetDoublei_v (GLenum target, GLuint index, GLdouble *data);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVIEWPORTARRAYVPROC) (GLuint first, GLsizei count, const GLfloat *v);
-typedef void (APIENTRYP PFNGLVIEWPORTINDEXEDFPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat w, GLfloat h);
-typedef void (APIENTRYP PFNGLVIEWPORTINDEXEDFVPROC) (GLuint index, const GLfloat *v);
-typedef void (APIENTRYP PFNGLSCISSORARRAYVPROC) (GLuint first, GLsizei count, const GLint *v);
-typedef void (APIENTRYP PFNGLSCISSORINDEXEDPROC) (GLuint index, GLint left, GLint bottom, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLSCISSORINDEXEDVPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLDEPTHRANGEARRAYVPROC) (GLuint first, GLsizei count, const GLdouble *v);
-typedef void (APIENTRYP PFNGLDEPTHRANGEINDEXEDPROC) (GLuint index, GLdouble n, GLdouble f);
-typedef void (APIENTRYP PFNGLGETFLOATI_VPROC) (GLenum target, GLuint index, GLfloat *data);
-typedef void (APIENTRYP PFNGLGETDOUBLEI_VPROC) (GLenum target, GLuint index, GLdouble *data);
-#endif
-
-#ifndef GL_ARB_cl_event
-#define GL_ARB_cl_event 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLsync APIENTRY glCreateSyncFromCLeventARB (struct _cl_context * context, struct _cl_event * event, GLbitfield flags);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLsync (APIENTRYP PFNGLCREATESYNCFROMCLEVENTARBPROC) (struct _cl_context * context, struct _cl_event * event, GLbitfield flags);
-#endif
-
-#ifndef GL_ARB_debug_output
-#define GL_ARB_debug_output 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDebugMessageControlARB (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-GLAPI void APIENTRY glDebugMessageInsertARB (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
-GLAPI void APIENTRY glDebugMessageCallbackARB (GLDEBUGPROCARB callback, const GLvoid *userParam);
-GLAPI GLuint APIENTRY glGetDebugMessageLogARB (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEBUGMESSAGECONTROLARBPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTARBPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
-typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKARBPROC) (GLDEBUGPROCARB callback, const GLvoid *userParam);
-typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGARBPROC) (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
-#endif
-
-#ifndef GL_ARB_robustness
-#define GL_ARB_robustness 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLenum APIENTRY glGetGraphicsResetStatusARB (void);
-GLAPI void APIENTRY glGetnMapdvARB (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v);
-GLAPI void APIENTRY glGetnMapfvARB (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v);
-GLAPI void APIENTRY glGetnMapivARB (GLenum target, GLenum query, GLsizei bufSize, GLint *v);
-GLAPI void APIENTRY glGetnPixelMapfvARB (GLenum map, GLsizei bufSize, GLfloat *values);
-GLAPI void APIENTRY glGetnPixelMapuivARB (GLenum map, GLsizei bufSize, GLuint *values);
-GLAPI void APIENTRY glGetnPixelMapusvARB (GLenum map, GLsizei bufSize, GLushort *values);
-GLAPI void APIENTRY glGetnPolygonStippleARB (GLsizei bufSize, GLubyte *pattern);
-GLAPI void APIENTRY glGetnColorTableARB (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *table);
-GLAPI void APIENTRY glGetnConvolutionFilterARB (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *image);
-GLAPI void APIENTRY glGetnSeparableFilterARB (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, GLvoid *row, GLsizei columnBufSize, GLvoid *column, GLvoid *span);
-GLAPI void APIENTRY glGetnHistogramARB (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values);
-GLAPI void APIENTRY glGetnMinmaxARB (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values);
-GLAPI void APIENTRY glGetnTexImageARB (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, GLvoid *img);
-GLAPI void APIENTRY glReadnPixelsARB (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, GLvoid *data);
-GLAPI void APIENTRY glGetnCompressedTexImageARB (GLenum target, GLint lod, GLsizei bufSize, GLvoid *img);
-GLAPI void APIENTRY glGetnUniformfvARB (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
-GLAPI void APIENTRY glGetnUniformivARB (GLuint program, GLint location, GLsizei bufSize, GLint *params);
-GLAPI void APIENTRY glGetnUniformuivARB (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
-GLAPI void APIENTRY glGetnUniformdvARB (GLuint program, GLint location, GLsizei bufSize, GLdouble *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLenum (APIENTRYP PFNGLGETGRAPHICSRESETSTATUSARBPROC) (void);
-typedef void (APIENTRYP PFNGLGETNMAPDVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v);
-typedef void (APIENTRYP PFNGLGETNMAPFVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v);
-typedef void (APIENTRYP PFNGLGETNMAPIVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLint *v);
-typedef void (APIENTRYP PFNGLGETNPIXELMAPFVARBPROC) (GLenum map, GLsizei bufSize, GLfloat *values);
-typedef void (APIENTRYP PFNGLGETNPIXELMAPUIVARBPROC) (GLenum map, GLsizei bufSize, GLuint *values);
-typedef void (APIENTRYP PFNGLGETNPIXELMAPUSVARBPROC) (GLenum map, GLsizei bufSize, GLushort *values);
-typedef void (APIENTRYP PFNGLGETNPOLYGONSTIPPLEARBPROC) (GLsizei bufSize, GLubyte *pattern);
-typedef void (APIENTRYP PFNGLGETNCOLORTABLEARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *table);
-typedef void (APIENTRYP PFNGLGETNCONVOLUTIONFILTERARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *image);
-typedef void (APIENTRYP PFNGLGETNSEPARABLEFILTERARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, GLvoid *row, GLsizei columnBufSize, GLvoid *column, GLvoid *span);
-typedef void (APIENTRYP PFNGLGETNHISTOGRAMARBPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values);
-typedef void (APIENTRYP PFNGLGETNMINMAXARBPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values);
-typedef void (APIENTRYP PFNGLGETNTEXIMAGEARBPROC) (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, GLvoid *img);
-typedef void (APIENTRYP PFNGLREADNPIXELSARBPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, GLvoid *data);
-typedef void (APIENTRYP PFNGLGETNCOMPRESSEDTEXIMAGEARBPROC) (GLenum target, GLint lod, GLsizei bufSize, GLvoid *img);
-typedef void (APIENTRYP PFNGLGETNUNIFORMFVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETNUNIFORMIVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params);
-typedef void (APIENTRYP PFNGLGETNUNIFORMUIVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLuint *params);
-typedef void (APIENTRYP PFNGLGETNUNIFORMDVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLdouble *params);
-#endif
-
-#ifndef GL_ARB_shader_stencil_export
-#define GL_ARB_shader_stencil_export 1
-#endif
-
-#ifndef GL_ARB_base_instance
-#define GL_ARB_base_instance 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawArraysInstancedBaseInstance (GLenum mode, GLint first, GLsizei count, GLsizei instancecount, GLuint baseinstance);
-GLAPI void APIENTRY glDrawElementsInstancedBaseInstance (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLuint baseinstance);
-GLAPI void APIENTRY glDrawElementsInstancedBaseVertexBaseInstance (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLint basevertex, GLuint baseinstance);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDBASEINSTANCEPROC) (GLenum mode, GLint first, GLsizei count, GLsizei instancecount, GLuint baseinstance);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEINSTANCEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLuint baseinstance);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEVERTEXBASEINSTANCEPROC) (GLenum mode, GLsizei count, GLenum type, const void *indices, GLsizei instancecount, GLint basevertex, GLuint baseinstance);
-#endif
-
-#ifndef GL_ARB_shading_language_420pack
-#define GL_ARB_shading_language_420pack 1
-#endif
-
-#ifndef GL_ARB_transform_feedback_instanced
-#define GL_ARB_transform_feedback_instanced 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawTransformFeedbackInstanced (GLenum mode, GLuint id, GLsizei instancecount);
-GLAPI void APIENTRY glDrawTransformFeedbackStreamInstanced (GLenum mode, GLuint id, GLuint stream, GLsizei instancecount);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKINSTANCEDPROC) (GLenum mode, GLuint id, GLsizei instancecount);
-typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKSTREAMINSTANCEDPROC) (GLenum mode, GLuint id, GLuint stream, GLsizei instancecount);
-#endif
-
-#ifndef GL_ARB_compressed_texture_pixel_storage
-#define GL_ARB_compressed_texture_pixel_storage 1
-#endif
-
-#ifndef GL_ARB_conservative_depth
-#define GL_ARB_conservative_depth 1
-#endif
-
-#ifndef GL_ARB_internalformat_query
-#define GL_ARB_internalformat_query 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetInternalformativ (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETINTERNALFORMATIVPROC) (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint *params);
-#endif
-
-#ifndef GL_ARB_map_buffer_alignment
-#define GL_ARB_map_buffer_alignment 1
-#endif
-
-#ifndef GL_ARB_shader_atomic_counters
-#define GL_ARB_shader_atomic_counters 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetActiveAtomicCounterBufferiv (GLuint program, GLuint bufferIndex, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETACTIVEATOMICCOUNTERBUFFERIVPROC) (GLuint program, GLuint bufferIndex, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_ARB_shader_image_load_store
-#define GL_ARB_shader_image_load_store 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindImageTexture (GLuint unit, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLenum format);
-GLAPI void APIENTRY glMemoryBarrier (GLbitfield barriers);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDIMAGETEXTUREPROC) (GLuint unit, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLenum format);
-typedef void (APIENTRYP PFNGLMEMORYBARRIERPROC) (GLbitfield barriers);
-#endif
-
-#ifndef GL_ARB_shading_language_packing
-#define GL_ARB_shading_language_packing 1
-#endif
-
-#ifndef GL_ARB_texture_storage
-#define GL_ARB_texture_storage 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexStorage1D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
-GLAPI void APIENTRY glTexStorage2D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glTexStorage3D (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
-GLAPI void APIENTRY glTextureStorage1DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
-GLAPI void APIENTRY glTextureStorage2DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glTextureStorage3DEXT (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXSTORAGE1DPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
-typedef void (APIENTRYP PFNGLTEXSTORAGE2DPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLTEXSTORAGE3DPROC) (GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
-typedef void (APIENTRYP PFNGLTEXTURESTORAGE1DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width);
-typedef void (APIENTRYP PFNGLTEXTURESTORAGE2DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLTEXTURESTORAGE3DEXTPROC) (GLuint texture, GLenum target, GLsizei levels, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth);
-#endif
-
-#ifndef GL_KHR_texture_compression_astc_ldr
-#define GL_KHR_texture_compression_astc_ldr 1
-#endif
-
-#ifndef GL_KHR_debug
-#define GL_KHR_debug 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDebugMessageControl (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-GLAPI void APIENTRY glDebugMessageInsert (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
-GLAPI void APIENTRY glDebugMessageCallback (GLDEBUGPROC callback, const void *userParam);
-GLAPI GLuint APIENTRY glGetDebugMessageLog (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
-GLAPI void APIENTRY glPushDebugGroup (GLenum source, GLuint id, GLsizei length, const GLchar *message);
-GLAPI void APIENTRY glPopDebugGroup (void);
-GLAPI void APIENTRY glObjectLabel (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
-GLAPI void APIENTRY glGetObjectLabel (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
-GLAPI void APIENTRY glObjectPtrLabel (const void *ptr, GLsizei length, const GLchar *label);
-GLAPI void APIENTRY glGetObjectPtrLabel (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEBUGMESSAGECONTROLPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf);
-typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKPROC) (GLDEBUGPROC callback, const void *userParam);
-typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGPROC) (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog);
-typedef void (APIENTRYP PFNGLPUSHDEBUGGROUPPROC) (GLenum source, GLuint id, GLsizei length, const GLchar *message);
-typedef void (APIENTRYP PFNGLPOPDEBUGGROUPPROC) (void);
-typedef void (APIENTRYP PFNGLOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei length, const GLchar *label);
-typedef void (APIENTRYP PFNGLGETOBJECTLABELPROC) (GLenum identifier, GLuint name, GLsizei bufSize, GLsizei *length, GLchar *label);
-typedef void (APIENTRYP PFNGLOBJECTPTRLABELPROC) (const void *ptr, GLsizei length, const GLchar *label);
-typedef void (APIENTRYP PFNGLGETOBJECTPTRLABELPROC) (const void *ptr, GLsizei bufSize, GLsizei *length, GLchar *label);
-#endif
-
-#ifndef GL_ARB_arrays_of_arrays
-#define GL_ARB_arrays_of_arrays 1
-#endif
-
-#ifndef GL_ARB_clear_buffer_object
-#define GL_ARB_clear_buffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glClearBufferData (GLenum target, GLenum internalformat, GLenum format, GLenum type, const void *data);
-GLAPI void APIENTRY glClearBufferSubData (GLenum target, GLenum internalformat, GLintptr offset, GLsizeiptr size, GLenum format, GLenum type, const void *data);
-GLAPI void APIENTRY glClearNamedBufferDataEXT (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, const void *data);
-GLAPI void APIENTRY glClearNamedBufferSubDataEXT (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, GLsizeiptr offset, GLsizeiptr size, const void *data);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCLEARBUFFERDATAPROC) (GLenum target, GLenum internalformat, GLenum format, GLenum type, const void *data);
-typedef void (APIENTRYP PFNGLCLEARBUFFERSUBDATAPROC) (GLenum target, GLenum internalformat, GLintptr offset, GLsizeiptr size, GLenum format, GLenum type, const void *data);
-typedef void (APIENTRYP PFNGLCLEARNAMEDBUFFERDATAEXTPROC) (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, const void *data);
-typedef void (APIENTRYP PFNGLCLEARNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLenum internalformat, GLenum format, GLenum type, GLsizeiptr offset, GLsizeiptr size, const void *data);
-#endif
-
-#ifndef GL_ARB_compute_shader
-#define GL_ARB_compute_shader 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDispatchCompute (GLuint num_groups_x, GLuint num_groups_y, GLuint num_groups_z);
-GLAPI void APIENTRY glDispatchComputeIndirect (GLintptr indirect);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDISPATCHCOMPUTEPROC) (GLuint num_groups_x, GLuint num_groups_y, GLuint num_groups_z);
-typedef void (APIENTRYP PFNGLDISPATCHCOMPUTEINDIRECTPROC) (GLintptr indirect);
-#endif
-
-#ifndef GL_ARB_copy_image
-#define GL_ARB_copy_image 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCopyImageSubData (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei srcWidth, GLsizei srcHeight, GLsizei srcDepth);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOPYIMAGESUBDATAPROC) (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei srcWidth, GLsizei srcHeight, GLsizei srcDepth);
-#endif
-
-#ifndef GL_ARB_texture_view
-#define GL_ARB_texture_view 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTextureView (GLuint texture, GLenum target, GLuint origtexture, GLenum internalformat, GLuint minlevel, GLuint numlevels, GLuint minlayer, GLuint numlayers);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXTUREVIEWPROC) (GLuint texture, GLenum target, GLuint origtexture, GLenum internalformat, GLuint minlevel, GLuint numlevels, GLuint minlayer, GLuint numlayers);
-#endif
-
-#ifndef GL_ARB_vertex_attrib_binding
-#define GL_ARB_vertex_attrib_binding 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindVertexBuffer (GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
-GLAPI void APIENTRY glVertexAttribFormat (GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
-GLAPI void APIENTRY glVertexAttribIFormat (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-GLAPI void APIENTRY glVertexAttribLFormat (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-GLAPI void APIENTRY glVertexAttribBinding (GLuint attribindex, GLuint bindingindex);
-GLAPI void APIENTRY glVertexBindingDivisor (GLuint bindingindex, GLuint divisor);
-GLAPI void APIENTRY glVertexArrayBindVertexBufferEXT (GLuint vaobj, GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
-GLAPI void APIENTRY glVertexArrayVertexAttribFormatEXT (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
-GLAPI void APIENTRY glVertexArrayVertexAttribIFormatEXT (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-GLAPI void APIENTRY glVertexArrayVertexAttribLFormatEXT (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-GLAPI void APIENTRY glVertexArrayVertexAttribBindingEXT (GLuint vaobj, GLuint attribindex, GLuint bindingindex);
-GLAPI void APIENTRY glVertexArrayVertexBindingDivisorEXT (GLuint vaobj, GLuint bindingindex, GLuint divisor);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDVERTEXBUFFERPROC) (GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBFORMATPROC) (GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBIFORMATPROC) (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBLFORMATPROC) (GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBBINDINGPROC) (GLuint attribindex, GLuint bindingindex);
-typedef void (APIENTRYP PFNGLVERTEXBINDINGDIVISORPROC) (GLuint bindingindex, GLuint divisor);
-typedef void (APIENTRYP PFNGLVERTEXARRAYBINDVERTEXBUFFEREXTPROC) (GLuint vaobj, GLuint bindingindex, GLuint buffer, GLintptr offset, GLsizei stride);
-typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBFORMATEXTPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLboolean normalized, GLuint relativeoffset);
-typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBIFORMATEXTPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBLFORMATEXTPROC) (GLuint vaobj, GLuint attribindex, GLint size, GLenum type, GLuint relativeoffset);
-typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBBINDINGEXTPROC) (GLuint vaobj, GLuint attribindex, GLuint bindingindex);
-typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXBINDINGDIVISOREXTPROC) (GLuint vaobj, GLuint bindingindex, GLuint divisor);
-#endif
-
-#ifndef GL_ARB_robustness_isolation
-#define GL_ARB_robustness_isolation 1
-#endif
-
-#ifndef GL_ARB_ES3_compatibility
-#define GL_ARB_ES3_compatibility 1
-#endif
-
-#ifndef GL_ARB_explicit_uniform_location
-#define GL_ARB_explicit_uniform_location 1
-#endif
-
-#ifndef GL_ARB_fragment_layer_viewport
-#define GL_ARB_fragment_layer_viewport 1
-#endif
-
-#ifndef GL_ARB_framebuffer_no_attachments
-#define GL_ARB_framebuffer_no_attachments 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFramebufferParameteri (GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glGetFramebufferParameteriv (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glNamedFramebufferParameteriEXT (GLuint framebuffer, GLenum pname, GLint param);
-GLAPI void APIENTRY glGetNamedFramebufferParameterivEXT (GLuint framebuffer, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFRAMEBUFFERPARAMETERIPROC) (GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLGETFRAMEBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERPARAMETERIEXTPROC) (GLuint framebuffer, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_ARB_internalformat_query2
-#define GL_ARB_internalformat_query2 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetInternalformati64v (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint64 *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETINTERNALFORMATI64VPROC) (GLenum target, GLenum internalformat, GLenum pname, GLsizei bufSize, GLint64 *params);
-#endif
-
-#ifndef GL_ARB_invalidate_subdata
-#define GL_ARB_invalidate_subdata 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glInvalidateTexSubImage (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
-GLAPI void APIENTRY glInvalidateTexImage (GLuint texture, GLint level);
-GLAPI void APIENTRY glInvalidateBufferSubData (GLuint buffer, GLintptr offset, GLsizeiptr length);
-GLAPI void APIENTRY glInvalidateBufferData (GLuint buffer);
-GLAPI void APIENTRY glInvalidateFramebuffer (GLenum target, GLsizei numAttachments, const GLenum *attachments);
-GLAPI void APIENTRY glInvalidateSubFramebuffer (GLenum target, GLsizei numAttachments, const GLenum *attachments, GLint x, GLint y, GLsizei width, GLsizei height);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLINVALIDATETEXSUBIMAGEPROC) (GLuint texture, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth);
-typedef void (APIENTRYP PFNGLINVALIDATETEXIMAGEPROC) (GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLINVALIDATEBUFFERSUBDATAPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length);
-typedef void (APIENTRYP PFNGLINVALIDATEBUFFERDATAPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLINVALIDATEFRAMEBUFFERPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments);
-typedef void (APIENTRYP PFNGLINVALIDATESUBFRAMEBUFFERPROC) (GLenum target, GLsizei numAttachments, const GLenum *attachments, GLint x, GLint y, GLsizei width, GLsizei height);
-#endif
-
-#ifndef GL_ARB_multi_draw_indirect
-#define GL_ARB_multi_draw_indirect 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMultiDrawArraysIndirect (GLenum mode, const void *indirect, GLsizei drawcount, GLsizei stride);
-GLAPI void APIENTRY glMultiDrawElementsIndirect (GLenum mode, GLenum type, const void *indirect, GLsizei drawcount, GLsizei stride);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTPROC) (GLenum mode, const void *indirect, GLsizei drawcount, GLsizei stride);
-typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTPROC) (GLenum mode, GLenum type, const void *indirect, GLsizei drawcount, GLsizei stride);
-#endif
-
-#ifndef GL_ARB_program_interface_query
-#define GL_ARB_program_interface_query 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetProgramInterfaceiv (GLuint program, GLenum programInterface, GLenum pname, GLint *params);
-GLAPI GLuint APIENTRY glGetProgramResourceIndex (GLuint program, GLenum programInterface, const GLchar *name);
-GLAPI void APIENTRY glGetProgramResourceName (GLuint program, GLenum programInterface, GLuint index, GLsizei bufSize, GLsizei *length, GLchar *name);
-GLAPI void APIENTRY glGetProgramResourceiv (GLuint program, GLenum programInterface, GLuint index, GLsizei propCount, const GLenum *props, GLsizei bufSize, GLsizei *length, GLint *params);
-GLAPI GLint APIENTRY glGetProgramResourceLocation (GLuint program, GLenum programInterface, const GLchar *name);
-GLAPI GLint APIENTRY glGetProgramResourceLocationIndex (GLuint program, GLenum programInterface, const GLchar *name);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETPROGRAMINTERFACEIVPROC) (GLuint program, GLenum programInterface, GLenum pname, GLint *params);
-typedef GLuint (APIENTRYP PFNGLGETPROGRAMRESOURCEINDEXPROC) (GLuint program, GLenum programInterface, const GLchar *name);
-typedef void (APIENTRYP PFNGLGETPROGRAMRESOURCENAMEPROC) (GLuint program, GLenum programInterface, GLuint index, GLsizei bufSize, GLsizei *length, GLchar *name);
-typedef void (APIENTRYP PFNGLGETPROGRAMRESOURCEIVPROC) (GLuint program, GLenum programInterface, GLuint index, GLsizei propCount, const GLenum *props, GLsizei bufSize, GLsizei *length, GLint *params);
-typedef GLint (APIENTRYP PFNGLGETPROGRAMRESOURCELOCATIONPROC) (GLuint program, GLenum programInterface, const GLchar *name);
-typedef GLint (APIENTRYP PFNGLGETPROGRAMRESOURCELOCATIONINDEXPROC) (GLuint program, GLenum programInterface, const GLchar *name);
-#endif
-
-#ifndef GL_ARB_robust_buffer_access_behavior
-#define GL_ARB_robust_buffer_access_behavior 1
-#endif
-
-#ifndef GL_ARB_shader_image_size
-#define GL_ARB_shader_image_size 1
-#endif
-
-#ifndef GL_ARB_shader_storage_buffer_object
-#define GL_ARB_shader_storage_buffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glShaderStorageBlockBinding (GLuint program, GLuint storageBlockIndex, GLuint storageBlockBinding);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSHADERSTORAGEBLOCKBINDINGPROC) (GLuint program, GLuint storageBlockIndex, GLuint storageBlockBinding);
-#endif
-
-#ifndef GL_ARB_stencil_texturing
-#define GL_ARB_stencil_texturing 1
-#endif
-
-#ifndef GL_ARB_texture_buffer_range
-#define GL_ARB_texture_buffer_range 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexBufferRange (GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
-GLAPI void APIENTRY glTextureBufferRangeEXT (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXBUFFERRANGEPROC) (GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
-typedef void (APIENTRYP PFNGLTEXTUREBUFFERRANGEEXTPROC) (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer, GLintptr offset, GLsizeiptr size);
-#endif
-
-#ifndef GL_ARB_texture_query_levels
-#define GL_ARB_texture_query_levels 1
-#endif
-
-#ifndef GL_ARB_texture_storage_multisample
-#define GL_ARB_texture_storage_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexStorage2DMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
-GLAPI void APIENTRY glTexStorage3DMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
-GLAPI void APIENTRY glTextureStorage2DMultisampleEXT (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
-GLAPI void APIENTRY glTextureStorage3DMultisampleEXT (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXSTORAGE2DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
-typedef void (APIENTRYP PFNGLTEXSTORAGE3DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
-typedef void (APIENTRYP PFNGLTEXTURESTORAGE2DMULTISAMPLEEXTPROC) (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations);
-typedef void (APIENTRYP PFNGLTEXTURESTORAGE3DMULTISAMPLEEXTPROC) (GLuint texture, GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations);
-#endif
-
-#ifndef GL_EXT_abgr
-#define GL_EXT_abgr 1
-#endif
-
-#ifndef GL_EXT_blend_color
-#define GL_EXT_blend_color 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendColorEXT (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDCOLOREXTPROC) (GLfloat red, GLfloat green, GLfloat blue, GLfloat alpha);
-#endif
-
-#ifndef GL_EXT_polygon_offset
-#define GL_EXT_polygon_offset 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPolygonOffsetEXT (GLfloat factor, GLfloat bias);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPOLYGONOFFSETEXTPROC) (GLfloat factor, GLfloat bias);
-#endif
-
-#ifndef GL_EXT_texture
-#define GL_EXT_texture 1
-#endif
-
-#ifndef GL_EXT_texture3D
-#define GL_EXT_texture3D 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexImage3DEXT (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTexSubImage3DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXIMAGE3DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXSUBIMAGE3DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-#endif
-
-#ifndef GL_SGIS_texture_filter4
-#define GL_SGIS_texture_filter4 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetTexFilterFuncSGIS (GLenum target, GLenum filter, GLfloat *weights);
-GLAPI void APIENTRY glTexFilterFuncSGIS (GLenum target, GLenum filter, GLsizei n, const GLfloat *weights);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETTEXFILTERFUNCSGISPROC) (GLenum target, GLenum filter, GLfloat *weights);
-typedef void (APIENTRYP PFNGLTEXFILTERFUNCSGISPROC) (GLenum target, GLenum filter, GLsizei n, const GLfloat *weights);
-#endif
-
-#ifndef GL_EXT_subtexture
-#define GL_EXT_subtexture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexSubImage1DEXT (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTexSubImage2DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXSUBIMAGE1DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXSUBIMAGE2DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels);
-#endif
-
-#ifndef GL_EXT_copy_texture
-#define GL_EXT_copy_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCopyTexImage1DEXT (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
-GLAPI void APIENTRY glCopyTexImage2DEXT (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
-GLAPI void APIENTRY glCopyTexSubImage1DEXT (GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glCopyTexSubImage2DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glCopyTexSubImage3DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOPYTEXIMAGE1DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
-typedef void (APIENTRYP PFNGLCOPYTEXIMAGE2DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
-typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE1DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE2DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE3DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-#endif
-
-#ifndef GL_EXT_histogram
-#define GL_EXT_histogram 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetHistogramEXT (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-GLAPI void APIENTRY glGetHistogramParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetHistogramParameterivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMinmaxEXT (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-GLAPI void APIENTRY glGetMinmaxParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMinmaxParameterivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glHistogramEXT (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
-GLAPI void APIENTRY glMinmaxEXT (GLenum target, GLenum internalformat, GLboolean sink);
-GLAPI void APIENTRY glResetHistogramEXT (GLenum target);
-GLAPI void APIENTRY glResetMinmaxEXT (GLenum target);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETHISTOGRAMEXTPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMINMAXEXTPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values);
-typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLHISTOGRAMEXTPROC) (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink);
-typedef void (APIENTRYP PFNGLMINMAXEXTPROC) (GLenum target, GLenum internalformat, GLboolean sink);
-typedef void (APIENTRYP PFNGLRESETHISTOGRAMEXTPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLRESETMINMAXEXTPROC) (GLenum target);
-#endif
-
-#ifndef GL_EXT_convolution
-#define GL_EXT_convolution 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glConvolutionFilter1DEXT (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image);
-GLAPI void APIENTRY glConvolutionFilter2DEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image);
-GLAPI void APIENTRY glConvolutionParameterfEXT (GLenum target, GLenum pname, GLfloat params);
-GLAPI void APIENTRY glConvolutionParameterfvEXT (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glConvolutionParameteriEXT (GLenum target, GLenum pname, GLint params);
-GLAPI void APIENTRY glConvolutionParameterivEXT (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glCopyConvolutionFilter1DEXT (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glCopyConvolutionFilter2DEXT (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetConvolutionFilterEXT (GLenum target, GLenum format, GLenum type, GLvoid *image);
-GLAPI void APIENTRY glGetConvolutionParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetConvolutionParameterivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetSeparableFilterEXT (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span);
-GLAPI void APIENTRY glSeparableFilter2DEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER1DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image);
-typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFEXTPROC) (GLenum target, GLenum pname, GLfloat params);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFVEXTPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIEXTPROC) (GLenum target, GLenum pname, GLint params);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER1DEXTPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONFILTEREXTPROC) (GLenum target, GLenum format, GLenum type, GLvoid *image);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETSEPARABLEFILTEREXTPROC) (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span);
-typedef void (APIENTRYP PFNGLSEPARABLEFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column);
-#endif
-
-#ifndef GL_SGI_color_matrix
-#define GL_SGI_color_matrix 1
-#endif
-
-#ifndef GL_SGI_color_table
-#define GL_SGI_color_table 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColorTableSGI (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table);
-GLAPI void APIENTRY glColorTableParameterfvSGI (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glColorTableParameterivSGI (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glCopyColorTableSGI (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glGetColorTableSGI (GLenum target, GLenum format, GLenum type, GLvoid *table);
-GLAPI void APIENTRY glGetColorTableParameterfvSGI (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetColorTableParameterivSGI (GLenum target, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLORTABLESGIPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table);
-typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERFVSGIPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERIVSGIPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLCOPYCOLORTABLESGIPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLGETCOLORTABLESGIPROC) (GLenum target, GLenum format, GLenum type, GLvoid *table);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVSGIPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVSGIPROC) (GLenum target, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_SGIX_pixel_texture
-#define GL_SGIX_pixel_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPixelTexGenSGIX (GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPIXELTEXGENSGIXPROC) (GLenum mode);
-#endif
-
-#ifndef GL_SGIS_pixel_texture
-#define GL_SGIS_pixel_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPixelTexGenParameteriSGIS (GLenum pname, GLint param);
-GLAPI void APIENTRY glPixelTexGenParameterivSGIS (GLenum pname, const GLint *params);
-GLAPI void APIENTRY glPixelTexGenParameterfSGIS (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glPixelTexGenParameterfvSGIS (GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glGetPixelTexGenParameterivSGIS (GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetPixelTexGenParameterfvSGIS (GLenum pname, GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERISGISPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERIVSGISPROC) (GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERFSGISPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERFVSGISPROC) (GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETPIXELTEXGENPARAMETERIVSGISPROC) (GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETPIXELTEXGENPARAMETERFVSGISPROC) (GLenum pname, GLfloat *params);
-#endif
-
-#ifndef GL_SGIS_texture4D
-#define GL_SGIS_texture4D 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexImage4DSGIS (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTexSubImage4DSGIS (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint woffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLenum format, GLenum type, const GLvoid *pixels);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXIMAGE4DSGISPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXSUBIMAGE4DSGISPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint woffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLenum format, GLenum type, const GLvoid *pixels);
-#endif
-
-#ifndef GL_SGI_texture_color_table
-#define GL_SGI_texture_color_table 1
-#endif
-
-#ifndef GL_EXT_cmyka
-#define GL_EXT_cmyka 1
-#endif
-
-#ifndef GL_EXT_texture_object
-#define GL_EXT_texture_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLboolean APIENTRY glAreTexturesResidentEXT (GLsizei n, const GLuint *textures, GLboolean *residences);
-GLAPI void APIENTRY glBindTextureEXT (GLenum target, GLuint texture);
-GLAPI void APIENTRY glDeleteTexturesEXT (GLsizei n, const GLuint *textures);
-GLAPI void APIENTRY glGenTexturesEXT (GLsizei n, GLuint *textures);
-GLAPI GLboolean APIENTRY glIsTextureEXT (GLuint texture);
-GLAPI void APIENTRY glPrioritizeTexturesEXT (GLsizei n, const GLuint *textures, const GLclampf *priorities);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLboolean (APIENTRYP PFNGLARETEXTURESRESIDENTEXTPROC) (GLsizei n, const GLuint *textures, GLboolean *residences);
-typedef void (APIENTRYP PFNGLBINDTEXTUREEXTPROC) (GLenum target, GLuint texture);
-typedef void (APIENTRYP PFNGLDELETETEXTURESEXTPROC) (GLsizei n, const GLuint *textures);
-typedef void (APIENTRYP PFNGLGENTEXTURESEXTPROC) (GLsizei n, GLuint *textures);
-typedef GLboolean (APIENTRYP PFNGLISTEXTUREEXTPROC) (GLuint texture);
-typedef void (APIENTRYP PFNGLPRIORITIZETEXTURESEXTPROC) (GLsizei n, const GLuint *textures, const GLclampf *priorities);
-#endif
-
-#ifndef GL_SGIS_detail_texture
-#define GL_SGIS_detail_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDetailTexFuncSGIS (GLenum target, GLsizei n, const GLfloat *points);
-GLAPI void APIENTRY glGetDetailTexFuncSGIS (GLenum target, GLfloat *points);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDETAILTEXFUNCSGISPROC) (GLenum target, GLsizei n, const GLfloat *points);
-typedef void (APIENTRYP PFNGLGETDETAILTEXFUNCSGISPROC) (GLenum target, GLfloat *points);
-#endif
-
-#ifndef GL_SGIS_sharpen_texture
-#define GL_SGIS_sharpen_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSharpenTexFuncSGIS (GLenum target, GLsizei n, const GLfloat *points);
-GLAPI void APIENTRY glGetSharpenTexFuncSGIS (GLenum target, GLfloat *points);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSHARPENTEXFUNCSGISPROC) (GLenum target, GLsizei n, const GLfloat *points);
-typedef void (APIENTRYP PFNGLGETSHARPENTEXFUNCSGISPROC) (GLenum target, GLfloat *points);
-#endif
-
-#ifndef GL_EXT_packed_pixels
-#define GL_EXT_packed_pixels 1
-#endif
-
-#ifndef GL_SGIS_texture_lod
-#define GL_SGIS_texture_lod 1
-#endif
-
-#ifndef GL_SGIS_multisample
-#define GL_SGIS_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSampleMaskSGIS (GLclampf value, GLboolean invert);
-GLAPI void APIENTRY glSamplePatternSGIS (GLenum pattern);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSAMPLEMASKSGISPROC) (GLclampf value, GLboolean invert);
-typedef void (APIENTRYP PFNGLSAMPLEPATTERNSGISPROC) (GLenum pattern);
-#endif
-
-#ifndef GL_EXT_rescale_normal
-#define GL_EXT_rescale_normal 1
-#endif
-
-#ifndef GL_EXT_vertex_array
-#define GL_EXT_vertex_array 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glArrayElementEXT (GLint i);
-GLAPI void APIENTRY glColorPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-GLAPI void APIENTRY glDrawArraysEXT (GLenum mode, GLint first, GLsizei count);
-GLAPI void APIENTRY glEdgeFlagPointerEXT (GLsizei stride, GLsizei count, const GLboolean *pointer);
-GLAPI void APIENTRY glGetPointervEXT (GLenum pname, GLvoid* *params);
-GLAPI void APIENTRY glIndexPointerEXT (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-GLAPI void APIENTRY glNormalPointerEXT (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-GLAPI void APIENTRY glTexCoordPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-GLAPI void APIENTRY glVertexPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLARRAYELEMENTEXTPROC) (GLint i);
-typedef void (APIENTRYP PFNGLCOLORPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLDRAWARRAYSEXTPROC) (GLenum mode, GLint first, GLsizei count);
-typedef void (APIENTRYP PFNGLEDGEFLAGPOINTEREXTPROC) (GLsizei stride, GLsizei count, const GLboolean *pointer);
-typedef void (APIENTRYP PFNGLGETPOINTERVEXTPROC) (GLenum pname, GLvoid* *params);
-typedef void (APIENTRYP PFNGLINDEXPOINTEREXTPROC) (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLNORMALPOINTEREXTPROC) (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLTEXCOORDPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLVERTEXPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer);
-#endif
-
-#ifndef GL_EXT_misc_attribute
-#define GL_EXT_misc_attribute 1
-#endif
-
-#ifndef GL_SGIS_generate_mipmap
-#define GL_SGIS_generate_mipmap 1
-#endif
-
-#ifndef GL_SGIX_clipmap
-#define GL_SGIX_clipmap 1
-#endif
-
-#ifndef GL_SGIX_shadow
-#define GL_SGIX_shadow 1
-#endif
-
-#ifndef GL_SGIS_texture_edge_clamp
-#define GL_SGIS_texture_edge_clamp 1
-#endif
-
-#ifndef GL_SGIS_texture_border_clamp
-#define GL_SGIS_texture_border_clamp 1
-#endif
-
-#ifndef GL_EXT_blend_minmax
-#define GL_EXT_blend_minmax 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendEquationEXT (GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDEQUATIONEXTPROC) (GLenum mode);
-#endif
-
-#ifndef GL_EXT_blend_subtract
-#define GL_EXT_blend_subtract 1
-#endif
-
-#ifndef GL_EXT_blend_logic_op
-#define GL_EXT_blend_logic_op 1
-#endif
-
-#ifndef GL_SGIX_interlace
-#define GL_SGIX_interlace 1
-#endif
-
-#ifndef GL_SGIX_pixel_tiles
-#define GL_SGIX_pixel_tiles 1
-#endif
-
-#ifndef GL_SGIX_texture_select
-#define GL_SGIX_texture_select 1
-#endif
-
-#ifndef GL_SGIX_sprite
-#define GL_SGIX_sprite 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSpriteParameterfSGIX (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glSpriteParameterfvSGIX (GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glSpriteParameteriSGIX (GLenum pname, GLint param);
-GLAPI void APIENTRY glSpriteParameterivSGIX (GLenum pname, const GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSPRITEPARAMETERFSGIXPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLSPRITEPARAMETERFVSGIXPROC) (GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLSPRITEPARAMETERISGIXPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLSPRITEPARAMETERIVSGIXPROC) (GLenum pname, const GLint *params);
-#endif
-
-#ifndef GL_SGIX_texture_multi_buffer
-#define GL_SGIX_texture_multi_buffer 1
-#endif
-
-#ifndef GL_EXT_point_parameters
-#define GL_EXT_point_parameters 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPointParameterfEXT (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glPointParameterfvEXT (GLenum pname, const GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFEXTPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFVEXTPROC) (GLenum pname, const GLfloat *params);
-#endif
-
-#ifndef GL_SGIS_point_parameters
-#define GL_SGIS_point_parameters 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPointParameterfSGIS (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glPointParameterfvSGIS (GLenum pname, const GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFSGISPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERFVSGISPROC) (GLenum pname, const GLfloat *params);
-#endif
-
-#ifndef GL_SGIX_instruments
-#define GL_SGIX_instruments 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLint APIENTRY glGetInstrumentsSGIX (void);
-GLAPI void APIENTRY glInstrumentsBufferSGIX (GLsizei size, GLint *buffer);
-GLAPI GLint APIENTRY glPollInstrumentsSGIX (GLint *marker_p);
-GLAPI void APIENTRY glReadInstrumentsSGIX (GLint marker);
-GLAPI void APIENTRY glStartInstrumentsSGIX (void);
-GLAPI void APIENTRY glStopInstrumentsSGIX (GLint marker);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLint (APIENTRYP PFNGLGETINSTRUMENTSSGIXPROC) (void);
-typedef void (APIENTRYP PFNGLINSTRUMENTSBUFFERSGIXPROC) (GLsizei size, GLint *buffer);
-typedef GLint (APIENTRYP PFNGLPOLLINSTRUMENTSSGIXPROC) (GLint *marker_p);
-typedef void (APIENTRYP PFNGLREADINSTRUMENTSSGIXPROC) (GLint marker);
-typedef void (APIENTRYP PFNGLSTARTINSTRUMENTSSGIXPROC) (void);
-typedef void (APIENTRYP PFNGLSTOPINSTRUMENTSSGIXPROC) (GLint marker);
-#endif
-
-#ifndef GL_SGIX_texture_scale_bias
-#define GL_SGIX_texture_scale_bias 1
-#endif
-
-#ifndef GL_SGIX_framezoom
-#define GL_SGIX_framezoom 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFrameZoomSGIX (GLint factor);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFRAMEZOOMSGIXPROC) (GLint factor);
-#endif
-
-#ifndef GL_SGIX_tag_sample_buffer
-#define GL_SGIX_tag_sample_buffer 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTagSampleBufferSGIX (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTAGSAMPLEBUFFERSGIXPROC) (void);
-#endif
-
-#ifndef GL_SGIX_polynomial_ffd
-#define GL_SGIX_polynomial_ffd 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDeformationMap3dSGIX (GLenum target, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, GLdouble w1, GLdouble w2, GLint wstride, GLint worder, const GLdouble *points);
-GLAPI void APIENTRY glDeformationMap3fSGIX (GLenum target, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, GLfloat w1, GLfloat w2, GLint wstride, GLint worder, const GLfloat *points);
-GLAPI void APIENTRY glDeformSGIX (GLbitfield mask);
-GLAPI void APIENTRY glLoadIdentityDeformationMapSGIX (GLbitfield mask);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEFORMATIONMAP3DSGIXPROC) (GLenum target, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, GLdouble w1, GLdouble w2, GLint wstride, GLint worder, const GLdouble *points);
-typedef void (APIENTRYP PFNGLDEFORMATIONMAP3FSGIXPROC) (GLenum target, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, GLfloat w1, GLfloat w2, GLint wstride, GLint worder, const GLfloat *points);
-typedef void (APIENTRYP PFNGLDEFORMSGIXPROC) (GLbitfield mask);
-typedef void (APIENTRYP PFNGLLOADIDENTITYDEFORMATIONMAPSGIXPROC) (GLbitfield mask);
-#endif
-
-#ifndef GL_SGIX_reference_plane
-#define GL_SGIX_reference_plane 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glReferencePlaneSGIX (const GLdouble *equation);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLREFERENCEPLANESGIXPROC) (const GLdouble *equation);
-#endif
-
-#ifndef GL_SGIX_flush_raster
-#define GL_SGIX_flush_raster 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFlushRasterSGIX (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFLUSHRASTERSGIXPROC) (void);
-#endif
-
-#ifndef GL_SGIX_depth_texture
-#define GL_SGIX_depth_texture 1
-#endif
-
-#ifndef GL_SGIS_fog_function
-#define GL_SGIS_fog_function 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFogFuncSGIS (GLsizei n, const GLfloat *points);
-GLAPI void APIENTRY glGetFogFuncSGIS (GLfloat *points);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFOGFUNCSGISPROC) (GLsizei n, const GLfloat *points);
-typedef void (APIENTRYP PFNGLGETFOGFUNCSGISPROC) (GLfloat *points);
-#endif
-
-#ifndef GL_SGIX_fog_offset
-#define GL_SGIX_fog_offset 1
-#endif
-
-#ifndef GL_HP_image_transform
-#define GL_HP_image_transform 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glImageTransformParameteriHP (GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glImageTransformParameterfHP (GLenum target, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glImageTransformParameterivHP (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glImageTransformParameterfvHP (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glGetImageTransformParameterivHP (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetImageTransformParameterfvHP (GLenum target, GLenum pname, GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERIHPPROC) (GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERFHPPROC) (GLenum target, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERIVHPPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERFVHPPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETIMAGETRANSFORMPARAMETERIVHPPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETIMAGETRANSFORMPARAMETERFVHPPROC) (GLenum target, GLenum pname, GLfloat *params);
-#endif
-
-#ifndef GL_HP_convolution_border_modes
-#define GL_HP_convolution_border_modes 1
-#endif
-
-#ifndef GL_SGIX_texture_add_env
-#define GL_SGIX_texture_add_env 1
-#endif
-
-#ifndef GL_EXT_color_subtable
-#define GL_EXT_color_subtable 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColorSubTableEXT (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data);
-GLAPI void APIENTRY glCopyColorSubTableEXT (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLORSUBTABLEEXTPROC) (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data);
-typedef void (APIENTRYP PFNGLCOPYCOLORSUBTABLEEXTPROC) (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width);
-#endif
-
-#ifndef GL_PGI_vertex_hints
-#define GL_PGI_vertex_hints 1
-#endif
-
-#ifndef GL_PGI_misc_hints
-#define GL_PGI_misc_hints 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glHintPGI (GLenum target, GLint mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLHINTPGIPROC) (GLenum target, GLint mode);
-#endif
-
-#ifndef GL_EXT_paletted_texture
-#define GL_EXT_paletted_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColorTableEXT (GLenum target, GLenum internalFormat, GLsizei width, GLenum format, GLenum type, const GLvoid *table);
-GLAPI void APIENTRY glGetColorTableEXT (GLenum target, GLenum format, GLenum type, GLvoid *data);
-GLAPI void APIENTRY glGetColorTableParameterivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetColorTableParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLORTABLEEXTPROC) (GLenum target, GLenum internalFormat, GLsizei width, GLenum format, GLenum type, const GLvoid *table);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEEXTPROC) (GLenum target, GLenum format, GLenum type, GLvoid *data);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
-#endif
-
-#ifndef GL_EXT_clip_volume_hint
-#define GL_EXT_clip_volume_hint 1
-#endif
-
-#ifndef GL_SGIX_list_priority
-#define GL_SGIX_list_priority 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetListParameterfvSGIX (GLuint list, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetListParameterivSGIX (GLuint list, GLenum pname, GLint *params);
-GLAPI void APIENTRY glListParameterfSGIX (GLuint list, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glListParameterfvSGIX (GLuint list, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glListParameteriSGIX (GLuint list, GLenum pname, GLint param);
-GLAPI void APIENTRY glListParameterivSGIX (GLuint list, GLenum pname, const GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETLISTPARAMETERFVSGIXPROC) (GLuint list, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETLISTPARAMETERIVSGIXPROC) (GLuint list, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLLISTPARAMETERFSGIXPROC) (GLuint list, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLLISTPARAMETERFVSGIXPROC) (GLuint list, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLLISTPARAMETERISGIXPROC) (GLuint list, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLLISTPARAMETERIVSGIXPROC) (GLuint list, GLenum pname, const GLint *params);
-#endif
-
-#ifndef GL_SGIX_ir_instrument1
-#define GL_SGIX_ir_instrument1 1
-#endif
-
-#ifndef GL_SGIX_calligraphic_fragment
-#define GL_SGIX_calligraphic_fragment 1
-#endif
-
-#ifndef GL_SGIX_texture_lod_bias
-#define GL_SGIX_texture_lod_bias 1
-#endif
-
-#ifndef GL_SGIX_shadow_ambient
-#define GL_SGIX_shadow_ambient 1
-#endif
-
-#ifndef GL_EXT_index_texture
-#define GL_EXT_index_texture 1
-#endif
-
-#ifndef GL_EXT_index_material
-#define GL_EXT_index_material 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glIndexMaterialEXT (GLenum face, GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLINDEXMATERIALEXTPROC) (GLenum face, GLenum mode);
-#endif
-
-#ifndef GL_EXT_index_func
-#define GL_EXT_index_func 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glIndexFuncEXT (GLenum func, GLclampf ref);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLINDEXFUNCEXTPROC) (GLenum func, GLclampf ref);
-#endif
-
-#ifndef GL_EXT_index_array_formats
-#define GL_EXT_index_array_formats 1
-#endif
-
-#ifndef GL_EXT_compiled_vertex_array
-#define GL_EXT_compiled_vertex_array 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glLockArraysEXT (GLint first, GLsizei count);
-GLAPI void APIENTRY glUnlockArraysEXT (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLLOCKARRAYSEXTPROC) (GLint first, GLsizei count);
-typedef void (APIENTRYP PFNGLUNLOCKARRAYSEXTPROC) (void);
-#endif
-
-#ifndef GL_EXT_cull_vertex
-#define GL_EXT_cull_vertex 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCullParameterdvEXT (GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glCullParameterfvEXT (GLenum pname, GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCULLPARAMETERDVEXTPROC) (GLenum pname, GLdouble *params);
-typedef void (APIENTRYP PFNGLCULLPARAMETERFVEXTPROC) (GLenum pname, GLfloat *params);
-#endif
-
-#ifndef GL_SGIX_ycrcb
-#define GL_SGIX_ycrcb 1
-#endif
-
-#ifndef GL_SGIX_fragment_lighting
-#define GL_SGIX_fragment_lighting 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFragmentColorMaterialSGIX (GLenum face, GLenum mode);
-GLAPI void APIENTRY glFragmentLightfSGIX (GLenum light, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glFragmentLightfvSGIX (GLenum light, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glFragmentLightiSGIX (GLenum light, GLenum pname, GLint param);
-GLAPI void APIENTRY glFragmentLightivSGIX (GLenum light, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glFragmentLightModelfSGIX (GLenum pname, GLfloat param);
-GLAPI void APIENTRY glFragmentLightModelfvSGIX (GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glFragmentLightModeliSGIX (GLenum pname, GLint param);
-GLAPI void APIENTRY glFragmentLightModelivSGIX (GLenum pname, const GLint *params);
-GLAPI void APIENTRY glFragmentMaterialfSGIX (GLenum face, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glFragmentMaterialfvSGIX (GLenum face, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glFragmentMaterialiSGIX (GLenum face, GLenum pname, GLint param);
-GLAPI void APIENTRY glFragmentMaterialivSGIX (GLenum face, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glGetFragmentLightfvSGIX (GLenum light, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetFragmentLightivSGIX (GLenum light, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetFragmentMaterialfvSGIX (GLenum face, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetFragmentMaterialivSGIX (GLenum face, GLenum pname, GLint *params);
-GLAPI void APIENTRY glLightEnviSGIX (GLenum pname, GLint param);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFRAGMENTCOLORMATERIALSGIXPROC) (GLenum face, GLenum mode);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTFSGIXPROC) (GLenum light, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTFVSGIXPROC) (GLenum light, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTISGIXPROC) (GLenum light, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTIVSGIXPROC) (GLenum light, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELFSGIXPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELFVSGIXPROC) (GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELISGIXPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELIVSGIXPROC) (GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLFRAGMENTMATERIALFSGIXPROC) (GLenum face, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLFRAGMENTMATERIALFVSGIXPROC) (GLenum face, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLFRAGMENTMATERIALISGIXPROC) (GLenum face, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLFRAGMENTMATERIALIVSGIXPROC) (GLenum face, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLGETFRAGMENTLIGHTFVSGIXPROC) (GLenum light, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETFRAGMENTLIGHTIVSGIXPROC) (GLenum light, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETFRAGMENTMATERIALFVSGIXPROC) (GLenum face, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETFRAGMENTMATERIALIVSGIXPROC) (GLenum face, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLLIGHTENVISGIXPROC) (GLenum pname, GLint param);
-#endif
-
-#ifndef GL_IBM_rasterpos_clip
-#define GL_IBM_rasterpos_clip 1
-#endif
-
-#ifndef GL_HP_texture_lighting
-#define GL_HP_texture_lighting 1
-#endif
-
-#ifndef GL_EXT_draw_range_elements
-#define GL_EXT_draw_range_elements 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawRangeElementsEXT (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSEXTPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices);
-#endif
-
-#ifndef GL_WIN_phong_shading
-#define GL_WIN_phong_shading 1
-#endif
-
-#ifndef GL_WIN_specular_fog
-#define GL_WIN_specular_fog 1
-#endif
-
-#ifndef GL_EXT_light_texture
-#define GL_EXT_light_texture 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glApplyTextureEXT (GLenum mode);
-GLAPI void APIENTRY glTextureLightEXT (GLenum pname);
-GLAPI void APIENTRY glTextureMaterialEXT (GLenum face, GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLAPPLYTEXTUREEXTPROC) (GLenum mode);
-typedef void (APIENTRYP PFNGLTEXTURELIGHTEXTPROC) (GLenum pname);
-typedef void (APIENTRYP PFNGLTEXTUREMATERIALEXTPROC) (GLenum face, GLenum mode);
-#endif
-
-#ifndef GL_SGIX_blend_alpha_minmax
-#define GL_SGIX_blend_alpha_minmax 1
-#endif
-
-#ifndef GL_EXT_bgra
-#define GL_EXT_bgra 1
-#endif
-
-#ifndef GL_SGIX_async
-#define GL_SGIX_async 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glAsyncMarkerSGIX (GLuint marker);
-GLAPI GLint APIENTRY glFinishAsyncSGIX (GLuint *markerp);
-GLAPI GLint APIENTRY glPollAsyncSGIX (GLuint *markerp);
-GLAPI GLuint APIENTRY glGenAsyncMarkersSGIX (GLsizei range);
-GLAPI void APIENTRY glDeleteAsyncMarkersSGIX (GLuint marker, GLsizei range);
-GLAPI GLboolean APIENTRY glIsAsyncMarkerSGIX (GLuint marker);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLASYNCMARKERSGIXPROC) (GLuint marker);
-typedef GLint (APIENTRYP PFNGLFINISHASYNCSGIXPROC) (GLuint *markerp);
-typedef GLint (APIENTRYP PFNGLPOLLASYNCSGIXPROC) (GLuint *markerp);
-typedef GLuint (APIENTRYP PFNGLGENASYNCMARKERSSGIXPROC) (GLsizei range);
-typedef void (APIENTRYP PFNGLDELETEASYNCMARKERSSGIXPROC) (GLuint marker, GLsizei range);
-typedef GLboolean (APIENTRYP PFNGLISASYNCMARKERSGIXPROC) (GLuint marker);
-#endif
-
-#ifndef GL_SGIX_async_pixel
-#define GL_SGIX_async_pixel 1
-#endif
-
-#ifndef GL_SGIX_async_histogram
-#define GL_SGIX_async_histogram 1
-#endif
-
-#ifndef GL_INTEL_parallel_arrays
-#define GL_INTEL_parallel_arrays 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexPointervINTEL (GLint size, GLenum type, const GLvoid* *pointer);
-GLAPI void APIENTRY glNormalPointervINTEL (GLenum type, const GLvoid* *pointer);
-GLAPI void APIENTRY glColorPointervINTEL (GLint size, GLenum type, const GLvoid* *pointer);
-GLAPI void APIENTRY glTexCoordPointervINTEL (GLint size, GLenum type, const GLvoid* *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXPOINTERVINTELPROC) (GLint size, GLenum type, const GLvoid* *pointer);
-typedef void (APIENTRYP PFNGLNORMALPOINTERVINTELPROC) (GLenum type, const GLvoid* *pointer);
-typedef void (APIENTRYP PFNGLCOLORPOINTERVINTELPROC) (GLint size, GLenum type, const GLvoid* *pointer);
-typedef void (APIENTRYP PFNGLTEXCOORDPOINTERVINTELPROC) (GLint size, GLenum type, const GLvoid* *pointer);
-#endif
-
-#ifndef GL_HP_occlusion_test
-#define GL_HP_occlusion_test 1
-#endif
-
-#ifndef GL_EXT_pixel_transform
-#define GL_EXT_pixel_transform 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPixelTransformParameteriEXT (GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glPixelTransformParameterfEXT (GLenum target, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glPixelTransformParameterivEXT (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glPixelTransformParameterfvEXT (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glGetPixelTransformParameterivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetPixelTransformParameterfvEXT (GLenum target, GLenum pname, GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERIEXTPROC) (GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERFEXTPROC) (GLenum target, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETPIXELTRANSFORMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETPIXELTRANSFORMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params);
-#endif
-
-#ifndef GL_EXT_pixel_transform_color_table
-#define GL_EXT_pixel_transform_color_table 1
-#endif
-
-#ifndef GL_EXT_shared_texture_palette
-#define GL_EXT_shared_texture_palette 1
-#endif
-
-#ifndef GL_EXT_separate_specular_color
-#define GL_EXT_separate_specular_color 1
-#endif
-
-#ifndef GL_EXT_secondary_color
-#define GL_EXT_secondary_color 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSecondaryColor3bEXT (GLbyte red, GLbyte green, GLbyte blue);
-GLAPI void APIENTRY glSecondaryColor3bvEXT (const GLbyte *v);
-GLAPI void APIENTRY glSecondaryColor3dEXT (GLdouble red, GLdouble green, GLdouble blue);
-GLAPI void APIENTRY glSecondaryColor3dvEXT (const GLdouble *v);
-GLAPI void APIENTRY glSecondaryColor3fEXT (GLfloat red, GLfloat green, GLfloat blue);
-GLAPI void APIENTRY glSecondaryColor3fvEXT (const GLfloat *v);
-GLAPI void APIENTRY glSecondaryColor3iEXT (GLint red, GLint green, GLint blue);
-GLAPI void APIENTRY glSecondaryColor3ivEXT (const GLint *v);
-GLAPI void APIENTRY glSecondaryColor3sEXT (GLshort red, GLshort green, GLshort blue);
-GLAPI void APIENTRY glSecondaryColor3svEXT (const GLshort *v);
-GLAPI void APIENTRY glSecondaryColor3ubEXT (GLubyte red, GLubyte green, GLubyte blue);
-GLAPI void APIENTRY glSecondaryColor3ubvEXT (const GLubyte *v);
-GLAPI void APIENTRY glSecondaryColor3uiEXT (GLuint red, GLuint green, GLuint blue);
-GLAPI void APIENTRY glSecondaryColor3uivEXT (const GLuint *v);
-GLAPI void APIENTRY glSecondaryColor3usEXT (GLushort red, GLushort green, GLushort blue);
-GLAPI void APIENTRY glSecondaryColor3usvEXT (const GLushort *v);
-GLAPI void APIENTRY glSecondaryColorPointerEXT (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BEXTPROC) (GLbyte red, GLbyte green, GLbyte blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BVEXTPROC) (const GLbyte *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DEXTPROC) (GLdouble red, GLdouble green, GLdouble blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DVEXTPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FEXTPROC) (GLfloat red, GLfloat green, GLfloat blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FVEXTPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IEXTPROC) (GLint red, GLint green, GLint blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IVEXTPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SEXTPROC) (GLshort red, GLshort green, GLshort blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SVEXTPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBEXTPROC) (GLubyte red, GLubyte green, GLubyte blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBVEXTPROC) (const GLubyte *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIEXTPROC) (GLuint red, GLuint green, GLuint blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIVEXTPROC) (const GLuint *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USEXTPROC) (GLushort red, GLushort green, GLushort blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USVEXTPROC) (const GLushort *v);
-typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif
-
-#ifndef GL_EXT_texture_perturb_normal
-#define GL_EXT_texture_perturb_normal 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTextureNormalEXT (GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXTURENORMALEXTPROC) (GLenum mode);
-#endif
-
-#ifndef GL_EXT_multi_draw_arrays
-#define GL_EXT_multi_draw_arrays 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMultiDrawArraysEXT (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
-GLAPI void APIENTRY glMultiDrawElementsEXT (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSEXTPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
-typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSEXTPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount);
-#endif
-
-#ifndef GL_EXT_fog_coord
-#define GL_EXT_fog_coord 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFogCoordfEXT (GLfloat coord);
-GLAPI void APIENTRY glFogCoordfvEXT (const GLfloat *coord);
-GLAPI void APIENTRY glFogCoorddEXT (GLdouble coord);
-GLAPI void APIENTRY glFogCoorddvEXT (const GLdouble *coord);
-GLAPI void APIENTRY glFogCoordPointerEXT (GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFOGCOORDFEXTPROC) (GLfloat coord);
-typedef void (APIENTRYP PFNGLFOGCOORDFVEXTPROC) (const GLfloat *coord);
-typedef void (APIENTRYP PFNGLFOGCOORDDEXTPROC) (GLdouble coord);
-typedef void (APIENTRYP PFNGLFOGCOORDDVEXTPROC) (const GLdouble *coord);
-typedef void (APIENTRYP PFNGLFOGCOORDPOINTEREXTPROC) (GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif
-
-#ifndef GL_REND_screen_coordinates
-#define GL_REND_screen_coordinates 1
-#endif
-
-#ifndef GL_EXT_coordinate_frame
-#define GL_EXT_coordinate_frame 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTangent3bEXT (GLbyte tx, GLbyte ty, GLbyte tz);
-GLAPI void APIENTRY glTangent3bvEXT (const GLbyte *v);
-GLAPI void APIENTRY glTangent3dEXT (GLdouble tx, GLdouble ty, GLdouble tz);
-GLAPI void APIENTRY glTangent3dvEXT (const GLdouble *v);
-GLAPI void APIENTRY glTangent3fEXT (GLfloat tx, GLfloat ty, GLfloat tz);
-GLAPI void APIENTRY glTangent3fvEXT (const GLfloat *v);
-GLAPI void APIENTRY glTangent3iEXT (GLint tx, GLint ty, GLint tz);
-GLAPI void APIENTRY glTangent3ivEXT (const GLint *v);
-GLAPI void APIENTRY glTangent3sEXT (GLshort tx, GLshort ty, GLshort tz);
-GLAPI void APIENTRY glTangent3svEXT (const GLshort *v);
-GLAPI void APIENTRY glBinormal3bEXT (GLbyte bx, GLbyte by, GLbyte bz);
-GLAPI void APIENTRY glBinormal3bvEXT (const GLbyte *v);
-GLAPI void APIENTRY glBinormal3dEXT (GLdouble bx, GLdouble by, GLdouble bz);
-GLAPI void APIENTRY glBinormal3dvEXT (const GLdouble *v);
-GLAPI void APIENTRY glBinormal3fEXT (GLfloat bx, GLfloat by, GLfloat bz);
-GLAPI void APIENTRY glBinormal3fvEXT (const GLfloat *v);
-GLAPI void APIENTRY glBinormal3iEXT (GLint bx, GLint by, GLint bz);
-GLAPI void APIENTRY glBinormal3ivEXT (const GLint *v);
-GLAPI void APIENTRY glBinormal3sEXT (GLshort bx, GLshort by, GLshort bz);
-GLAPI void APIENTRY glBinormal3svEXT (const GLshort *v);
-GLAPI void APIENTRY glTangentPointerEXT (GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glBinormalPointerEXT (GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTANGENT3BEXTPROC) (GLbyte tx, GLbyte ty, GLbyte tz);
-typedef void (APIENTRYP PFNGLTANGENT3BVEXTPROC) (const GLbyte *v);
-typedef void (APIENTRYP PFNGLTANGENT3DEXTPROC) (GLdouble tx, GLdouble ty, GLdouble tz);
-typedef void (APIENTRYP PFNGLTANGENT3DVEXTPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLTANGENT3FEXTPROC) (GLfloat tx, GLfloat ty, GLfloat tz);
-typedef void (APIENTRYP PFNGLTANGENT3FVEXTPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLTANGENT3IEXTPROC) (GLint tx, GLint ty, GLint tz);
-typedef void (APIENTRYP PFNGLTANGENT3IVEXTPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLTANGENT3SEXTPROC) (GLshort tx, GLshort ty, GLshort tz);
-typedef void (APIENTRYP PFNGLTANGENT3SVEXTPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLBINORMAL3BEXTPROC) (GLbyte bx, GLbyte by, GLbyte bz);
-typedef void (APIENTRYP PFNGLBINORMAL3BVEXTPROC) (const GLbyte *v);
-typedef void (APIENTRYP PFNGLBINORMAL3DEXTPROC) (GLdouble bx, GLdouble by, GLdouble bz);
-typedef void (APIENTRYP PFNGLBINORMAL3DVEXTPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLBINORMAL3FEXTPROC) (GLfloat bx, GLfloat by, GLfloat bz);
-typedef void (APIENTRYP PFNGLBINORMAL3FVEXTPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLBINORMAL3IEXTPROC) (GLint bx, GLint by, GLint bz);
-typedef void (APIENTRYP PFNGLBINORMAL3IVEXTPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLBINORMAL3SEXTPROC) (GLshort bx, GLshort by, GLshort bz);
-typedef void (APIENTRYP PFNGLBINORMAL3SVEXTPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLTANGENTPOINTEREXTPROC) (GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLBINORMALPOINTEREXTPROC) (GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif
-
-#ifndef GL_EXT_texture_env_combine
-#define GL_EXT_texture_env_combine 1
-#endif
-
-#ifndef GL_APPLE_specular_vector
-#define GL_APPLE_specular_vector 1
-#endif
-
-#ifndef GL_APPLE_transform_hint
-#define GL_APPLE_transform_hint 1
-#endif
-
-#ifndef GL_SGIX_fog_scale
-#define GL_SGIX_fog_scale 1
-#endif
-
-#ifndef GL_SUNX_constant_data
-#define GL_SUNX_constant_data 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFinishTextureSUNX (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFINISHTEXTURESUNXPROC) (void);
-#endif
-
-#ifndef GL_SUN_global_alpha
-#define GL_SUN_global_alpha 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGlobalAlphaFactorbSUN (GLbyte factor);
-GLAPI void APIENTRY glGlobalAlphaFactorsSUN (GLshort factor);
-GLAPI void APIENTRY glGlobalAlphaFactoriSUN (GLint factor);
-GLAPI void APIENTRY glGlobalAlphaFactorfSUN (GLfloat factor);
-GLAPI void APIENTRY glGlobalAlphaFactordSUN (GLdouble factor);
-GLAPI void APIENTRY glGlobalAlphaFactorubSUN (GLubyte factor);
-GLAPI void APIENTRY glGlobalAlphaFactorusSUN (GLushort factor);
-GLAPI void APIENTRY glGlobalAlphaFactoruiSUN (GLuint factor);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORBSUNPROC) (GLbyte factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORSSUNPROC) (GLshort factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORISUNPROC) (GLint factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORFSUNPROC) (GLfloat factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORDSUNPROC) (GLdouble factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUBSUNPROC) (GLubyte factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUSSUNPROC) (GLushort factor);
-typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUISUNPROC) (GLuint factor);
-#endif
-
-#ifndef GL_SUN_triangle_list
-#define GL_SUN_triangle_list 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glReplacementCodeuiSUN (GLuint code);
-GLAPI void APIENTRY glReplacementCodeusSUN (GLushort code);
-GLAPI void APIENTRY glReplacementCodeubSUN (GLubyte code);
-GLAPI void APIENTRY glReplacementCodeuivSUN (const GLuint *code);
-GLAPI void APIENTRY glReplacementCodeusvSUN (const GLushort *code);
-GLAPI void APIENTRY glReplacementCodeubvSUN (const GLubyte *code);
-GLAPI void APIENTRY glReplacementCodePointerSUN (GLenum type, GLsizei stride, const GLvoid* *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUISUNPROC) (GLuint code);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUSSUNPROC) (GLushort code);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUBSUNPROC) (GLubyte code);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVSUNPROC) (const GLuint *code);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUSVSUNPROC) (const GLushort *code);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUBVSUNPROC) (const GLubyte *code);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEPOINTERSUNPROC) (GLenum type, GLsizei stride, const GLvoid* *pointer);
-#endif
-
-#ifndef GL_SUN_vertex
-#define GL_SUN_vertex 1
+#define GL_PRIMARY_COLOR_NV               0x852C
+#define GL_SECONDARY_COLOR_NV             0x852D
+#define GL_ROUNDED_RECT_NV                0xE8
+#define GL_RELATIVE_ROUNDED_RECT_NV       0xE9
+#define GL_ROUNDED_RECT2_NV               0xEA
+#define GL_RELATIVE_ROUNDED_RECT2_NV      0xEB
+#define GL_ROUNDED_RECT4_NV               0xEC
+#define GL_RELATIVE_ROUNDED_RECT4_NV      0xED
+#define GL_ROUNDED_RECT8_NV               0xEE
+#define GL_RELATIVE_ROUNDED_RECT8_NV      0xEF
+#define GL_RELATIVE_RECT_NV               0xF7
+#define GL_FONT_GLYPHS_AVAILABLE_NV       0x9368
+#define GL_FONT_TARGET_UNAVAILABLE_NV     0x9369
+#define GL_FONT_UNAVAILABLE_NV            0x936A
+#define GL_FONT_UNINTELLIGIBLE_NV         0x936B
+#define GL_CONIC_CURVE_TO_NV              0x1A
+#define GL_RELATIVE_CONIC_CURVE_TO_NV     0x1B
+#define GL_FONT_NUM_GLYPH_INDICES_BIT_NV  0x20000000
+#define GL_STANDARD_FONT_FORMAT_NV        0x936C
+#define GL_2_BYTES_NV                     0x1407
+#define GL_3_BYTES_NV                     0x1408
+#define GL_4_BYTES_NV                     0x1409
+#define GL_EYE_LINEAR_NV                  0x2400
+#define GL_OBJECT_LINEAR_NV               0x2401
+#define GL_CONSTANT_NV                    0x8576
+#define GL_PATH_PROJECTION_NV             0x1701
+#define GL_PATH_MODELVIEW_NV              0x1700
+#define GL_PATH_MODELVIEW_STACK_DEPTH_NV  0x0BA3
+#define GL_PATH_MODELVIEW_MATRIX_NV       0x0BA6
+#define GL_PATH_MAX_MODELVIEW_STACK_DEPTH_NV 0x0D36
+#define GL_PATH_TRANSPOSE_MODELVIEW_MATRIX_NV 0x84E3
+#define GL_PATH_PROJECTION_STACK_DEPTH_NV 0x0BA4
+#define GL_PATH_PROJECTION_MATRIX_NV      0x0BA7
+#define GL_PATH_MAX_PROJECTION_STACK_DEPTH_NV 0x0D38
+#define GL_PATH_TRANSPOSE_PROJECTION_MATRIX_NV 0x84E4
+#define GL_FRAGMENT_INPUT_NV              0x936D
+typedef GLuint (APIENTRYP PFNGLGENPATHSNVPROC) (GLsizei range);
+typedef void (APIENTRYP PFNGLDELETEPATHSNVPROC) (GLuint path, GLsizei range);
+typedef GLboolean (APIENTRYP PFNGLISPATHNVPROC) (GLuint path);
+typedef void (APIENTRYP PFNGLPATHCOMMANDSNVPROC) (GLuint path, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const void *coords);
+typedef void (APIENTRYP PFNGLPATHCOORDSNVPROC) (GLuint path, GLsizei numCoords, GLenum coordType, const void *coords);
+typedef void (APIENTRYP PFNGLPATHSUBCOMMANDSNVPROC) (GLuint path, GLsizei commandStart, GLsizei commandsToDelete, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const void *coords);
+typedef void (APIENTRYP PFNGLPATHSUBCOORDSNVPROC) (GLuint path, GLsizei coordStart, GLsizei numCoords, GLenum coordType, const void *coords);
+typedef void (APIENTRYP PFNGLPATHSTRINGNVPROC) (GLuint path, GLenum format, GLsizei length, const void *pathString);
+typedef void (APIENTRYP PFNGLPATHGLYPHSNVPROC) (GLuint firstPathName, GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLsizei numGlyphs, GLenum type, const void *charcodes, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+typedef void (APIENTRYP PFNGLPATHGLYPHRANGENVPROC) (GLuint firstPathName, GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLuint firstGlyph, GLsizei numGlyphs, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+typedef void (APIENTRYP PFNGLWEIGHTPATHSNVPROC) (GLuint resultPath, GLsizei numPaths, const GLuint *paths, const GLfloat *weights);
+typedef void (APIENTRYP PFNGLCOPYPATHNVPROC) (GLuint resultPath, GLuint srcPath);
+typedef void (APIENTRYP PFNGLINTERPOLATEPATHSNVPROC) (GLuint resultPath, GLuint pathA, GLuint pathB, GLfloat weight);
+typedef void (APIENTRYP PFNGLTRANSFORMPATHNVPROC) (GLuint resultPath, GLuint srcPath, GLenum transformType, const GLfloat *transformValues);
+typedef void (APIENTRYP PFNGLPATHPARAMETERIVNVPROC) (GLuint path, GLenum pname, const GLint *value);
+typedef void (APIENTRYP PFNGLPATHPARAMETERINVPROC) (GLuint path, GLenum pname, GLint value);
+typedef void (APIENTRYP PFNGLPATHPARAMETERFVNVPROC) (GLuint path, GLenum pname, const GLfloat *value);
+typedef void (APIENTRYP PFNGLPATHPARAMETERFNVPROC) (GLuint path, GLenum pname, GLfloat value);
+typedef void (APIENTRYP PFNGLPATHDASHARRAYNVPROC) (GLuint path, GLsizei dashCount, const GLfloat *dashArray);
+typedef void (APIENTRYP PFNGLPATHSTENCILFUNCNVPROC) (GLenum func, GLint ref, GLuint mask);
+typedef void (APIENTRYP PFNGLPATHSTENCILDEPTHOFFSETNVPROC) (GLfloat factor, GLfloat units);
+typedef void (APIENTRYP PFNGLSTENCILFILLPATHNVPROC) (GLuint path, GLenum fillMode, GLuint mask);
+typedef void (APIENTRYP PFNGLSTENCILSTROKEPATHNVPROC) (GLuint path, GLint reference, GLuint mask);
+typedef void (APIENTRYP PFNGLSTENCILFILLPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum fillMode, GLuint mask, GLenum transformType, const GLfloat *transformValues);
+typedef void (APIENTRYP PFNGLSTENCILSTROKEPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLint reference, GLuint mask, GLenum transformType, const GLfloat *transformValues);
+typedef void (APIENTRYP PFNGLPATHCOVERDEPTHFUNCNVPROC) (GLenum func);
+typedef void (APIENTRYP PFNGLPATHCOLORGENNVPROC) (GLenum color, GLenum genMode, GLenum colorFormat, const GLfloat *coeffs);
+typedef void (APIENTRYP PFNGLPATHTEXGENNVPROC) (GLenum texCoordSet, GLenum genMode, GLint components, const GLfloat *coeffs);
+typedef void (APIENTRYP PFNGLPATHFOGGENNVPROC) (GLenum genMode);
+typedef void (APIENTRYP PFNGLCOVERFILLPATHNVPROC) (GLuint path, GLenum coverMode);
+typedef void (APIENTRYP PFNGLCOVERSTROKEPATHNVPROC) (GLuint path, GLenum coverMode);
+typedef void (APIENTRYP PFNGLCOVERFILLPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+typedef void (APIENTRYP PFNGLCOVERSTROKEPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+typedef void (APIENTRYP PFNGLGETPATHPARAMETERIVNVPROC) (GLuint path, GLenum pname, GLint *value);
+typedef void (APIENTRYP PFNGLGETPATHPARAMETERFVNVPROC) (GLuint path, GLenum pname, GLfloat *value);
+typedef void (APIENTRYP PFNGLGETPATHCOMMANDSNVPROC) (GLuint path, GLubyte *commands);
+typedef void (APIENTRYP PFNGLGETPATHCOORDSNVPROC) (GLuint path, GLfloat *coords);
+typedef void (APIENTRYP PFNGLGETPATHDASHARRAYNVPROC) (GLuint path, GLfloat *dashArray);
+typedef void (APIENTRYP PFNGLGETPATHMETRICSNVPROC) (GLbitfield metricQueryMask, GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLsizei stride, GLfloat *metrics);
+typedef void (APIENTRYP PFNGLGETPATHMETRICRANGENVPROC) (GLbitfield metricQueryMask, GLuint firstPathName, GLsizei numPaths, GLsizei stride, GLfloat *metrics);
+typedef void (APIENTRYP PFNGLGETPATHSPACINGNVPROC) (GLenum pathListMode, GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLfloat advanceScale, GLfloat kerningScale, GLenum transformType, GLfloat *returnedSpacing);
+typedef void (APIENTRYP PFNGLGETPATHCOLORGENIVNVPROC) (GLenum color, GLenum pname, GLint *value);
+typedef void (APIENTRYP PFNGLGETPATHCOLORGENFVNVPROC) (GLenum color, GLenum pname, GLfloat *value);
+typedef void (APIENTRYP PFNGLGETPATHTEXGENIVNVPROC) (GLenum texCoordSet, GLenum pname, GLint *value);
+typedef void (APIENTRYP PFNGLGETPATHTEXGENFVNVPROC) (GLenum texCoordSet, GLenum pname, GLfloat *value);
+typedef GLboolean (APIENTRYP PFNGLISPOINTINFILLPATHNVPROC) (GLuint path, GLuint mask, GLfloat x, GLfloat y);
+typedef GLboolean (APIENTRYP PFNGLISPOINTINSTROKEPATHNVPROC) (GLuint path, GLfloat x, GLfloat y);
+typedef GLfloat (APIENTRYP PFNGLGETPATHLENGTHNVPROC) (GLuint path, GLsizei startSegment, GLsizei numSegments);
+typedef GLboolean (APIENTRYP PFNGLPOINTALONGPATHNVPROC) (GLuint path, GLsizei startSegment, GLsizei numSegments, GLfloat distance, GLfloat *x, GLfloat *y, GLfloat *tangentX, GLfloat *tangentY);
+typedef void (APIENTRYP PFNGLMATRIXLOAD3X2FNVPROC) (GLenum matrixMode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXLOAD3X3FNVPROC) (GLenum matrixMode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSE3X3FNVPROC) (GLenum matrixMode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXMULT3X2FNVPROC) (GLenum matrixMode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXMULT3X3FNVPROC) (GLenum matrixMode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSE3X3FNVPROC) (GLenum matrixMode, const GLfloat *m);
+typedef void (APIENTRYP PFNGLSTENCILTHENCOVERFILLPATHNVPROC) (GLuint path, GLenum fillMode, GLuint mask, GLenum coverMode);
+typedef void (APIENTRYP PFNGLSTENCILTHENCOVERSTROKEPATHNVPROC) (GLuint path, GLint reference, GLuint mask, GLenum coverMode);
+typedef void (APIENTRYP PFNGLSTENCILTHENCOVERFILLPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum fillMode, GLuint mask, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+typedef void (APIENTRYP PFNGLSTENCILTHENCOVERSTROKEPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLint reference, GLuint mask, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+typedef GLenum (APIENTRYP PFNGLPATHGLYPHINDEXRANGENVPROC) (GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLuint pathParameterTemplate, GLfloat emScale, GLuint baseAndCount[2]);
+typedef GLenum (APIENTRYP PFNGLPATHGLYPHINDEXARRAYNVPROC) (GLuint firstPathName, GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLuint firstGlyphIndex, GLsizei numGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+typedef GLenum (APIENTRYP PFNGLPATHMEMORYGLYPHINDEXARRAYNVPROC) (GLuint firstPathName, GLenum fontTarget, GLsizeiptr fontSize, const void *fontData, GLsizei faceIndex, GLuint firstGlyphIndex, GLsizei numGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+typedef void (APIENTRYP PFNGLPROGRAMPATHFRAGMENTINPUTGENNVPROC) (GLuint program, GLint location, GLenum genMode, GLint components, const GLfloat *coeffs);
+typedef void (APIENTRYP PFNGLGETPROGRAMRESOURCEFVNVPROC) (GLuint program, GLenum programInterface, GLuint index, GLsizei propCount, const GLenum *props, GLsizei bufSize, GLsizei *length, GLfloat *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColor4ubVertex2fSUN (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y);
-GLAPI void APIENTRY glColor4ubVertex2fvSUN (const GLubyte *c, const GLfloat *v);
-GLAPI void APIENTRY glColor4ubVertex3fSUN (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glColor4ubVertex3fvSUN (const GLubyte *c, const GLfloat *v);
-GLAPI void APIENTRY glColor3fVertex3fSUN (GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glColor3fVertex3fvSUN (const GLfloat *c, const GLfloat *v);
-GLAPI void APIENTRY glNormal3fVertex3fSUN (GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glNormal3fVertex3fvSUN (const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glColor4fNormal3fVertex3fSUN (GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glColor4fNormal3fVertex3fvSUN (const GLfloat *c, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord2fVertex3fSUN (GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glTexCoord2fVertex3fvSUN (const GLfloat *tc, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord4fVertex4fSUN (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glTexCoord4fVertex4fvSUN (const GLfloat *tc, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord2fColor4ubVertex3fSUN (GLfloat s, GLfloat t, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glTexCoord2fColor4ubVertex3fvSUN (const GLfloat *tc, const GLubyte *c, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord2fColor3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glTexCoord2fColor3fVertex3fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord2fNormal3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glTexCoord2fNormal3fVertex3fvSUN (const GLfloat *tc, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord2fColor4fNormal3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glTexCoord2fColor4fNormal3fVertex3fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glTexCoord4fColor4fNormal3fVertex4fSUN (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glTexCoord4fColor4fNormal3fVertex4fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiVertex3fSUN (GLuint rc, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiVertex3fvSUN (const GLuint *rc, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiColor4ubVertex3fSUN (GLuint rc, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiColor4ubVertex3fvSUN (const GLuint *rc, const GLubyte *c, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiColor3fVertex3fSUN (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiColor3fVertex3fvSUN (const GLuint *rc, const GLfloat *c, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiNormal3fVertex3fSUN (GLuint rc, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiColor4fNormal3fVertex3fSUN (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiColor4fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiTexCoord2fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiTexCoord2fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiTexCoord2fNormal3fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiTexCoord2fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *n, const GLfloat *v);
-GLAPI void APIENTRY glReplacementCodeuiTexCoord2fColor4fNormal3fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glReplacementCodeuiTexCoord2fColor4fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX2FSUNPROC) (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX2FVSUNPROC) (const GLubyte *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX3FSUNPROC) (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX3FVSUNPROC) (const GLubyte *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLCOLOR3FVERTEX3FSUNPROC) (GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLCOLOR3FVERTEX3FVSUNPROC) (const GLfloat *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLNORMAL3FVERTEX3FSUNPROC) (GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *c, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD2FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLTEXCOORD2FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD4FVERTEX4FSUNPROC) (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLTEXCOORD4FVERTEX4FVSUNPROC) (const GLfloat *tc, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4UBVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4UBVERTEX3FVSUNPROC) (const GLfloat *tc, const GLubyte *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD2FNORMAL3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLTEXCOORD2FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLTEXCOORD4FCOLOR4FNORMAL3FVERTEX4FSUNPROC) (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLTEXCOORD4FCOLOR4FNORMAL3FVERTEX4FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVERTEX3FSUNPROC) (GLuint rc, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4UBVERTEX3FSUNPROC) (GLuint rc, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4UBVERTEX3FVSUNPROC) (const GLuint *rc, const GLubyte *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR3FVERTEX3FSUNPROC) (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *c, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUINORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUINORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *n, const GLfloat *v);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
-#endif
+GLAPI GLuint APIENTRY glGenPathsNV (GLsizei range);
+GLAPI void APIENTRY glDeletePathsNV (GLuint path, GLsizei range);
+GLAPI GLboolean APIENTRY glIsPathNV (GLuint path);
+GLAPI void APIENTRY glPathCommandsNV (GLuint path, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const void *coords);
+GLAPI void APIENTRY glPathCoordsNV (GLuint path, GLsizei numCoords, GLenum coordType, const void *coords);
+GLAPI void APIENTRY glPathSubCommandsNV (GLuint path, GLsizei commandStart, GLsizei commandsToDelete, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const void *coords);
+GLAPI void APIENTRY glPathSubCoordsNV (GLuint path, GLsizei coordStart, GLsizei numCoords, GLenum coordType, const void *coords);
+GLAPI void APIENTRY glPathStringNV (GLuint path, GLenum format, GLsizei length, const void *pathString);
+GLAPI void APIENTRY glPathGlyphsNV (GLuint firstPathName, GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLsizei numGlyphs, GLenum type, const void *charcodes, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+GLAPI void APIENTRY glPathGlyphRangeNV (GLuint firstPathName, GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLuint firstGlyph, GLsizei numGlyphs, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+GLAPI void APIENTRY glWeightPathsNV (GLuint resultPath, GLsizei numPaths, const GLuint *paths, const GLfloat *weights);
+GLAPI void APIENTRY glCopyPathNV (GLuint resultPath, GLuint srcPath);
+GLAPI void APIENTRY glInterpolatePathsNV (GLuint resultPath, GLuint pathA, GLuint pathB, GLfloat weight);
+GLAPI void APIENTRY glTransformPathNV (GLuint resultPath, GLuint srcPath, GLenum transformType, const GLfloat *transformValues);
+GLAPI void APIENTRY glPathParameterivNV (GLuint path, GLenum pname, const GLint *value);
+GLAPI void APIENTRY glPathParameteriNV (GLuint path, GLenum pname, GLint value);
+GLAPI void APIENTRY glPathParameterfvNV (GLuint path, GLenum pname, const GLfloat *value);
+GLAPI void APIENTRY glPathParameterfNV (GLuint path, GLenum pname, GLfloat value);
+GLAPI void APIENTRY glPathDashArrayNV (GLuint path, GLsizei dashCount, const GLfloat *dashArray);
+GLAPI void APIENTRY glPathStencilFuncNV (GLenum func, GLint ref, GLuint mask);
+GLAPI void APIENTRY glPathStencilDepthOffsetNV (GLfloat factor, GLfloat units);
+GLAPI void APIENTRY glStencilFillPathNV (GLuint path, GLenum fillMode, GLuint mask);
+GLAPI void APIENTRY glStencilStrokePathNV (GLuint path, GLint reference, GLuint mask);
+GLAPI void APIENTRY glStencilFillPathInstancedNV (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum fillMode, GLuint mask, GLenum transformType, const GLfloat *transformValues);
+GLAPI void APIENTRY glStencilStrokePathInstancedNV (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLint reference, GLuint mask, GLenum transformType, const GLfloat *transformValues);
+GLAPI void APIENTRY glPathCoverDepthFuncNV (GLenum func);
+GLAPI void APIENTRY glPathColorGenNV (GLenum color, GLenum genMode, GLenum colorFormat, const GLfloat *coeffs);
+GLAPI void APIENTRY glPathTexGenNV (GLenum texCoordSet, GLenum genMode, GLint components, const GLfloat *coeffs);
+GLAPI void APIENTRY glPathFogGenNV (GLenum genMode);
+GLAPI void APIENTRY glCoverFillPathNV (GLuint path, GLenum coverMode);
+GLAPI void APIENTRY glCoverStrokePathNV (GLuint path, GLenum coverMode);
+GLAPI void APIENTRY glCoverFillPathInstancedNV (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+GLAPI void APIENTRY glCoverStrokePathInstancedNV (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+GLAPI void APIENTRY glGetPathParameterivNV (GLuint path, GLenum pname, GLint *value);
+GLAPI void APIENTRY glGetPathParameterfvNV (GLuint path, GLenum pname, GLfloat *value);
+GLAPI void APIENTRY glGetPathCommandsNV (GLuint path, GLubyte *commands);
+GLAPI void APIENTRY glGetPathCoordsNV (GLuint path, GLfloat *coords);
+GLAPI void APIENTRY glGetPathDashArrayNV (GLuint path, GLfloat *dashArray);
+GLAPI void APIENTRY glGetPathMetricsNV (GLbitfield metricQueryMask, GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLsizei stride, GLfloat *metrics);
+GLAPI void APIENTRY glGetPathMetricRangeNV (GLbitfield metricQueryMask, GLuint firstPathName, GLsizei numPaths, GLsizei stride, GLfloat *metrics);
+GLAPI void APIENTRY glGetPathSpacingNV (GLenum pathListMode, GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLfloat advanceScale, GLfloat kerningScale, GLenum transformType, GLfloat *returnedSpacing);
+GLAPI void APIENTRY glGetPathColorGenivNV (GLenum color, GLenum pname, GLint *value);
+GLAPI void APIENTRY glGetPathColorGenfvNV (GLenum color, GLenum pname, GLfloat *value);
+GLAPI void APIENTRY glGetPathTexGenivNV (GLenum texCoordSet, GLenum pname, GLint *value);
+GLAPI void APIENTRY glGetPathTexGenfvNV (GLenum texCoordSet, GLenum pname, GLfloat *value);
+GLAPI GLboolean APIENTRY glIsPointInFillPathNV (GLuint path, GLuint mask, GLfloat x, GLfloat y);
+GLAPI GLboolean APIENTRY glIsPointInStrokePathNV (GLuint path, GLfloat x, GLfloat y);
+GLAPI GLfloat APIENTRY glGetPathLengthNV (GLuint path, GLsizei startSegment, GLsizei numSegments);
+GLAPI GLboolean APIENTRY glPointAlongPathNV (GLuint path, GLsizei startSegment, GLsizei numSegments, GLfloat distance, GLfloat *x, GLfloat *y, GLfloat *tangentX, GLfloat *tangentY);
+GLAPI void APIENTRY glMatrixLoad3x2fNV (GLenum matrixMode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixLoad3x3fNV (GLenum matrixMode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixLoadTranspose3x3fNV (GLenum matrixMode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixMult3x2fNV (GLenum matrixMode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixMult3x3fNV (GLenum matrixMode, const GLfloat *m);
+GLAPI void APIENTRY glMatrixMultTranspose3x3fNV (GLenum matrixMode, const GLfloat *m);
+GLAPI void APIENTRY glStencilThenCoverFillPathNV (GLuint path, GLenum fillMode, GLuint mask, GLenum coverMode);
+GLAPI void APIENTRY glStencilThenCoverStrokePathNV (GLuint path, GLint reference, GLuint mask, GLenum coverMode);
+GLAPI void APIENTRY glStencilThenCoverFillPathInstancedNV (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLenum fillMode, GLuint mask, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+GLAPI void APIENTRY glStencilThenCoverStrokePathInstancedNV (GLsizei numPaths, GLenum pathNameType, const void *paths, GLuint pathBase, GLint reference, GLuint mask, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
+GLAPI GLenum APIENTRY glPathGlyphIndexRangeNV (GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLuint pathParameterTemplate, GLfloat emScale, GLuint baseAndCount[2]);
+GLAPI GLenum APIENTRY glPathGlyphIndexArrayNV (GLuint firstPathName, GLenum fontTarget, const void *fontName, GLbitfield fontStyle, GLuint firstGlyphIndex, GLsizei numGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+GLAPI GLenum APIENTRY glPathMemoryGlyphIndexArrayNV (GLuint firstPathName, GLenum fontTarget, GLsizeiptr fontSize, const void *fontData, GLsizei faceIndex, GLuint firstGlyphIndex, GLsizei numGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
+GLAPI void APIENTRY glProgramPathFragmentInputGenNV (GLuint program, GLint location, GLenum genMode, GLint components, const GLfloat *coeffs);
+GLAPI void APIENTRY glGetProgramResourcefvNV (GLuint program, GLenum programInterface, GLuint index, GLsizei propCount, const GLenum *props, GLsizei bufSize, GLsizei *length, GLfloat *params);
+#endif
+#endif /* GL_NV_path_rendering */
 
-#ifndef GL_EXT_blend_func_separate
-#define GL_EXT_blend_func_separate 1
+#ifndef GL_NV_pixel_data_range
+#define GL_NV_pixel_data_range 1
+#define GL_WRITE_PIXEL_DATA_RANGE_NV      0x8878
+#define GL_READ_PIXEL_DATA_RANGE_NV       0x8879
+#define GL_WRITE_PIXEL_DATA_RANGE_LENGTH_NV 0x887A
+#define GL_READ_PIXEL_DATA_RANGE_LENGTH_NV 0x887B
+#define GL_WRITE_PIXEL_DATA_RANGE_POINTER_NV 0x887C
+#define GL_READ_PIXEL_DATA_RANGE_POINTER_NV 0x887D
+typedef void (APIENTRYP PFNGLPIXELDATARANGENVPROC) (GLenum target, GLsizei length, const void *pointer);
+typedef void (APIENTRYP PFNGLFLUSHPIXELDATARANGENVPROC) (GLenum target);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendFuncSeparateEXT (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEEXTPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
+GLAPI void APIENTRY glPixelDataRangeNV (GLenum target, GLsizei length, const void *pointer);
+GLAPI void APIENTRY glFlushPixelDataRangeNV (GLenum target);
 #endif
+#endif /* GL_NV_pixel_data_range */
 
-#ifndef GL_INGR_blend_func_separate
-#define GL_INGR_blend_func_separate 1
+#ifndef GL_NV_point_sprite
+#define GL_NV_point_sprite 1
+#define GL_POINT_SPRITE_NV                0x8861
+#define GL_COORD_REPLACE_NV               0x8862
+#define GL_POINT_SPRITE_R_MODE_NV         0x8863
+typedef void (APIENTRYP PFNGLPOINTPARAMETERINVPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERIVNVPROC) (GLenum pname, const GLint *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendFuncSeparateINGR (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEINGRPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha);
-#endif
-
-#ifndef GL_INGR_color_clamp
-#define GL_INGR_color_clamp 1
-#endif
-
-#ifndef GL_INGR_interlace_read
-#define GL_INGR_interlace_read 1
-#endif
-
-#ifndef GL_EXT_stencil_wrap
-#define GL_EXT_stencil_wrap 1
-#endif
-
-#ifndef GL_EXT_422_pixels
-#define GL_EXT_422_pixels 1
-#endif
-
-#ifndef GL_NV_texgen_reflection
-#define GL_NV_texgen_reflection 1
-#endif
-
-#ifndef GL_SUN_convolution_border_modes
-#define GL_SUN_convolution_border_modes 1
-#endif
-
-#ifndef GL_EXT_texture_env_add
-#define GL_EXT_texture_env_add 1
-#endif
-
-#ifndef GL_EXT_texture_lod_bias
-#define GL_EXT_texture_lod_bias 1
-#endif
-
-#ifndef GL_EXT_texture_filter_anisotropic
-#define GL_EXT_texture_filter_anisotropic 1
+GLAPI void APIENTRY glPointParameteriNV (GLenum pname, GLint param);
+GLAPI void APIENTRY glPointParameterivNV (GLenum pname, const GLint *params);
 #endif
+#endif /* GL_NV_point_sprite */
 
-#ifndef GL_EXT_vertex_weighting
-#define GL_EXT_vertex_weighting 1
+#ifndef GL_NV_present_video
+#define GL_NV_present_video 1
+#define GL_FRAME_NV                       0x8E26
+#define GL_FIELDS_NV                      0x8E27
+#define GL_CURRENT_TIME_NV                0x8E28
+#define GL_NUM_FILL_STREAMS_NV            0x8E29
+#define GL_PRESENT_TIME_NV                0x8E2A
+#define GL_PRESENT_DURATION_NV            0x8E2B
+typedef void (APIENTRYP PFNGLPRESENTFRAMEKEYEDNVPROC) (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLuint key0, GLenum target1, GLuint fill1, GLuint key1);
+typedef void (APIENTRYP PFNGLPRESENTFRAMEDUALFILLNVPROC) (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLenum target1, GLuint fill1, GLenum target2, GLuint fill2, GLenum target3, GLuint fill3);
+typedef void (APIENTRYP PFNGLGETVIDEOIVNVPROC) (GLuint video_slot, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVIDEOUIVNVPROC) (GLuint video_slot, GLenum pname, GLuint *params);
+typedef void (APIENTRYP PFNGLGETVIDEOI64VNVPROC) (GLuint video_slot, GLenum pname, GLint64EXT *params);
+typedef void (APIENTRYP PFNGLGETVIDEOUI64VNVPROC) (GLuint video_slot, GLenum pname, GLuint64EXT *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexWeightfEXT (GLfloat weight);
-GLAPI void APIENTRY glVertexWeightfvEXT (const GLfloat *weight);
-GLAPI void APIENTRY glVertexWeightPointerEXT (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTFEXTPROC) (GLfloat weight);
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTFVEXTPROC) (const GLfloat *weight);
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-#endif
-
-#ifndef GL_NV_light_max_exponent
-#define GL_NV_light_max_exponent 1
+GLAPI void APIENTRY glPresentFrameKeyedNV (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLuint key0, GLenum target1, GLuint fill1, GLuint key1);
+GLAPI void APIENTRY glPresentFrameDualFillNV (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLenum target1, GLuint fill1, GLenum target2, GLuint fill2, GLenum target3, GLuint fill3);
+GLAPI void APIENTRY glGetVideoivNV (GLuint video_slot, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVideouivNV (GLuint video_slot, GLenum pname, GLuint *params);
+GLAPI void APIENTRY glGetVideoi64vNV (GLuint video_slot, GLenum pname, GLint64EXT *params);
+GLAPI void APIENTRY glGetVideoui64vNV (GLuint video_slot, GLenum pname, GLuint64EXT *params);
 #endif
+#endif /* GL_NV_present_video */
 
-#ifndef GL_NV_vertex_array_range
-#define GL_NV_vertex_array_range 1
+#ifndef GL_NV_primitive_restart
+#define GL_NV_primitive_restart 1
+#define GL_PRIMITIVE_RESTART_NV           0x8558
+#define GL_PRIMITIVE_RESTART_INDEX_NV     0x8559
+typedef void (APIENTRYP PFNGLPRIMITIVERESTARTNVPROC) (void);
+typedef void (APIENTRYP PFNGLPRIMITIVERESTARTINDEXNVPROC) (GLuint index);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFlushVertexArrayRangeNV (void);
-GLAPI void APIENTRY glVertexArrayRangeNV (GLsizei length, const GLvoid *pointer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFLUSHVERTEXARRAYRANGENVPROC) (void);
-typedef void (APIENTRYP PFNGLVERTEXARRAYRANGENVPROC) (GLsizei length, const GLvoid *pointer);
+GLAPI void APIENTRY glPrimitiveRestartNV (void);
+GLAPI void APIENTRY glPrimitiveRestartIndexNV (GLuint index);
 #endif
+#endif /* GL_NV_primitive_restart */
 
 #ifndef GL_NV_register_combiners
 #define GL_NV_register_combiners 1
+#define GL_REGISTER_COMBINERS_NV          0x8522
+#define GL_VARIABLE_A_NV                  0x8523
+#define GL_VARIABLE_B_NV                  0x8524
+#define GL_VARIABLE_C_NV                  0x8525
+#define GL_VARIABLE_D_NV                  0x8526
+#define GL_VARIABLE_E_NV                  0x8527
+#define GL_VARIABLE_F_NV                  0x8528
+#define GL_VARIABLE_G_NV                  0x8529
+#define GL_CONSTANT_COLOR0_NV             0x852A
+#define GL_CONSTANT_COLOR1_NV             0x852B
+#define GL_SPARE0_NV                      0x852E
+#define GL_SPARE1_NV                      0x852F
+#define GL_DISCARD_NV                     0x8530
+#define GL_E_TIMES_F_NV                   0x8531
+#define GL_SPARE0_PLUS_SECONDARY_COLOR_NV 0x8532
+#define GL_UNSIGNED_IDENTITY_NV           0x8536
+#define GL_UNSIGNED_INVERT_NV             0x8537
+#define GL_EXPAND_NORMAL_NV               0x8538
+#define GL_EXPAND_NEGATE_NV               0x8539
+#define GL_HALF_BIAS_NORMAL_NV            0x853A
+#define GL_HALF_BIAS_NEGATE_NV            0x853B
+#define GL_SIGNED_IDENTITY_NV             0x853C
+#define GL_SIGNED_NEGATE_NV               0x853D
+#define GL_SCALE_BY_TWO_NV                0x853E
+#define GL_SCALE_BY_FOUR_NV               0x853F
+#define GL_SCALE_BY_ONE_HALF_NV           0x8540
+#define GL_BIAS_BY_NEGATIVE_ONE_HALF_NV   0x8541
+#define GL_COMBINER_INPUT_NV              0x8542
+#define GL_COMBINER_MAPPING_NV            0x8543
+#define GL_COMBINER_COMPONENT_USAGE_NV    0x8544
+#define GL_COMBINER_AB_DOT_PRODUCT_NV     0x8545
+#define GL_COMBINER_CD_DOT_PRODUCT_NV     0x8546
+#define GL_COMBINER_MUX_SUM_NV            0x8547
+#define GL_COMBINER_SCALE_NV              0x8548
+#define GL_COMBINER_BIAS_NV               0x8549
+#define GL_COMBINER_AB_OUTPUT_NV          0x854A
+#define GL_COMBINER_CD_OUTPUT_NV          0x854B
+#define GL_COMBINER_SUM_OUTPUT_NV         0x854C
+#define GL_MAX_GENERAL_COMBINERS_NV       0x854D
+#define GL_NUM_GENERAL_COMBINERS_NV       0x854E
+#define GL_COLOR_SUM_CLAMP_NV             0x854F
+#define GL_COMBINER0_NV                   0x8550
+#define GL_COMBINER1_NV                   0x8551
+#define GL_COMBINER2_NV                   0x8552
+#define GL_COMBINER3_NV                   0x8553
+#define GL_COMBINER4_NV                   0x8554
+#define GL_COMBINER5_NV                   0x8555
+#define GL_COMBINER6_NV                   0x8556
+#define GL_COMBINER7_NV                   0x8557
+typedef void (APIENTRYP PFNGLCOMBINERPARAMETERFVNVPROC) (GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLCOMBINERPARAMETERFNVPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLCOMBINERPARAMETERIVNVPROC) (GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLCOMBINERPARAMETERINVPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLCOMBINERINPUTNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage);
+typedef void (APIENTRYP PFNGLCOMBINEROUTPUTNVPROC) (GLenum stage, GLenum portion, GLenum abOutput, GLenum cdOutput, GLenum sumOutput, GLenum scale, GLenum bias, GLboolean abDotProduct, GLboolean cdDotProduct, GLboolean muxSum);
+typedef void (APIENTRYP PFNGLFINALCOMBINERINPUTNVPROC) (GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage);
+typedef void (APIENTRYP PFNGLGETCOMBINERINPUTPARAMETERFVNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCOMBINERINPUTPARAMETERIVNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETCOMBINEROUTPUTPARAMETERFVNVPROC) (GLenum stage, GLenum portion, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCOMBINEROUTPUTPARAMETERIVNVPROC) (GLenum stage, GLenum portion, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETFINALCOMBINERINPUTPARAMETERFVNVPROC) (GLenum variable, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETFINALCOMBINERINPUTPARAMETERIVNVPROC) (GLenum variable, GLenum pname, GLint *params);
 #ifdef GL_GLEXT_PROTOTYPES
 GLAPI void APIENTRY glCombinerParameterfvNV (GLenum pname, const GLfloat *params);
 GLAPI void APIENTRY glCombinerParameterfNV (GLenum pname, GLfloat param);
@@ -9994,364 +9837,586 @@ GLAPI void APIENTRY glGetCombinerOutputParameterfvNV (GLenum stage, GLenum porti
 GLAPI void APIENTRY glGetCombinerOutputParameterivNV (GLenum stage, GLenum portion, GLenum pname, GLint *params);
 GLAPI void APIENTRY glGetFinalCombinerInputParameterfvNV (GLenum variable, GLenum pname, GLfloat *params);
 GLAPI void APIENTRY glGetFinalCombinerInputParameterivNV (GLenum variable, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOMBINERPARAMETERFVNVPROC) (GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLCOMBINERPARAMETERFNVPROC) (GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLCOMBINERPARAMETERIVNVPROC) (GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLCOMBINERPARAMETERINVPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLCOMBINERINPUTNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage);
-typedef void (APIENTRYP PFNGLCOMBINEROUTPUTNVPROC) (GLenum stage, GLenum portion, GLenum abOutput, GLenum cdOutput, GLenum sumOutput, GLenum scale, GLenum bias, GLboolean abDotProduct, GLboolean cdDotProduct, GLboolean muxSum);
-typedef void (APIENTRYP PFNGLFINALCOMBINERINPUTNVPROC) (GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage);
-typedef void (APIENTRYP PFNGLGETCOMBINERINPUTPARAMETERFVNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCOMBINERINPUTPARAMETERIVNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETCOMBINEROUTPUTPARAMETERFVNVPROC) (GLenum stage, GLenum portion, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCOMBINEROUTPUTPARAMETERIVNVPROC) (GLenum stage, GLenum portion, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETFINALCOMBINERINPUTPARAMETERFVNVPROC) (GLenum variable, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETFINALCOMBINERINPUTPARAMETERIVNVPROC) (GLenum variable, GLenum pname, GLint *params);
 #endif
+#endif /* GL_NV_register_combiners */
 
-#ifndef GL_NV_fog_distance
-#define GL_NV_fog_distance 1
+#ifndef GL_NV_register_combiners2
+#define GL_NV_register_combiners2 1
+#define GL_PER_STAGE_CONSTANTS_NV         0x8535
+typedef void (APIENTRYP PFNGLCOMBINERSTAGEPARAMETERFVNVPROC) (GLenum stage, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCOMBINERSTAGEPARAMETERFVNVPROC) (GLenum stage, GLenum pname, GLfloat *params);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glCombinerStageParameterfvNV (GLenum stage, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glGetCombinerStageParameterfvNV (GLenum stage, GLenum pname, GLfloat *params);
 #endif
+#endif /* GL_NV_register_combiners2 */
 
-#ifndef GL_NV_texgen_emboss
-#define GL_NV_texgen_emboss 1
-#endif
+#ifndef GL_NV_shader_atomic_counters
+#define GL_NV_shader_atomic_counters 1
+#endif /* GL_NV_shader_atomic_counters */
 
-#ifndef GL_NV_blend_square
-#define GL_NV_blend_square 1
-#endif
+#ifndef GL_NV_shader_atomic_float
+#define GL_NV_shader_atomic_float 1
+#endif /* GL_NV_shader_atomic_float */
 
-#ifndef GL_NV_texture_env_combine4
-#define GL_NV_texture_env_combine4 1
-#endif
+#ifndef GL_NV_shader_atomic_int64
+#define GL_NV_shader_atomic_int64 1
+#endif /* GL_NV_shader_atomic_int64 */
 
-#ifndef GL_MESA_resize_buffers
-#define GL_MESA_resize_buffers 1
+#ifndef GL_NV_shader_buffer_load
+#define GL_NV_shader_buffer_load 1
+#define GL_BUFFER_GPU_ADDRESS_NV          0x8F1D
+#define GL_GPU_ADDRESS_NV                 0x8F34
+#define GL_MAX_SHADER_BUFFER_ADDRESS_NV   0x8F35
+typedef void (APIENTRYP PFNGLMAKEBUFFERRESIDENTNVPROC) (GLenum target, GLenum access);
+typedef void (APIENTRYP PFNGLMAKEBUFFERNONRESIDENTNVPROC) (GLenum target);
+typedef GLboolean (APIENTRYP PFNGLISBUFFERRESIDENTNVPROC) (GLenum target);
+typedef void (APIENTRYP PFNGLMAKENAMEDBUFFERRESIDENTNVPROC) (GLuint buffer, GLenum access);
+typedef void (APIENTRYP PFNGLMAKENAMEDBUFFERNONRESIDENTNVPROC) (GLuint buffer);
+typedef GLboolean (APIENTRYP PFNGLISNAMEDBUFFERRESIDENTNVPROC) (GLuint buffer);
+typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERUI64VNVPROC) (GLenum target, GLenum pname, GLuint64EXT *params);
+typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERUI64VNVPROC) (GLuint buffer, GLenum pname, GLuint64EXT *params);
+typedef void (APIENTRYP PFNGLGETINTEGERUI64VNVPROC) (GLenum value, GLuint64EXT *result);
+typedef void (APIENTRYP PFNGLUNIFORMUI64NVPROC) (GLint location, GLuint64EXT value);
+typedef void (APIENTRYP PFNGLUNIFORMUI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMUI64NVPROC) (GLuint program, GLint location, GLuint64EXT value);
+typedef void (APIENTRYP PFNGLPROGRAMUNIFORMUI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glResizeBuffersMESA (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLRESIZEBUFFERSMESAPROC) (void);
+GLAPI void APIENTRY glMakeBufferResidentNV (GLenum target, GLenum access);
+GLAPI void APIENTRY glMakeBufferNonResidentNV (GLenum target);
+GLAPI GLboolean APIENTRY glIsBufferResidentNV (GLenum target);
+GLAPI void APIENTRY glMakeNamedBufferResidentNV (GLuint buffer, GLenum access);
+GLAPI void APIENTRY glMakeNamedBufferNonResidentNV (GLuint buffer);
+GLAPI GLboolean APIENTRY glIsNamedBufferResidentNV (GLuint buffer);
+GLAPI void APIENTRY glGetBufferParameterui64vNV (GLenum target, GLenum pname, GLuint64EXT *params);
+GLAPI void APIENTRY glGetNamedBufferParameterui64vNV (GLuint buffer, GLenum pname, GLuint64EXT *params);
+GLAPI void APIENTRY glGetIntegerui64vNV (GLenum value, GLuint64EXT *result);
+GLAPI void APIENTRY glUniformui64NV (GLint location, GLuint64EXT value);
+GLAPI void APIENTRY glUniformui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glProgramUniformui64NV (GLuint program, GLint location, GLuint64EXT value);
+GLAPI void APIENTRY glProgramUniformui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
 #endif
+#endif /* GL_NV_shader_buffer_load */
 
-#ifndef GL_MESA_window_pos
-#define GL_MESA_window_pos 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glWindowPos2dMESA (GLdouble x, GLdouble y);
-GLAPI void APIENTRY glWindowPos2dvMESA (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos2fMESA (GLfloat x, GLfloat y);
-GLAPI void APIENTRY glWindowPos2fvMESA (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos2iMESA (GLint x, GLint y);
-GLAPI void APIENTRY glWindowPos2ivMESA (const GLint *v);
-GLAPI void APIENTRY glWindowPos2sMESA (GLshort x, GLshort y);
-GLAPI void APIENTRY glWindowPos2svMESA (const GLshort *v);
-GLAPI void APIENTRY glWindowPos3dMESA (GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glWindowPos3dvMESA (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos3fMESA (GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glWindowPos3fvMESA (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos3iMESA (GLint x, GLint y, GLint z);
-GLAPI void APIENTRY glWindowPos3ivMESA (const GLint *v);
-GLAPI void APIENTRY glWindowPos3sMESA (GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glWindowPos3svMESA (const GLshort *v);
-GLAPI void APIENTRY glWindowPos4dMESA (GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glWindowPos4dvMESA (const GLdouble *v);
-GLAPI void APIENTRY glWindowPos4fMESA (GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glWindowPos4fvMESA (const GLfloat *v);
-GLAPI void APIENTRY glWindowPos4iMESA (GLint x, GLint y, GLint z, GLint w);
-GLAPI void APIENTRY glWindowPos4ivMESA (const GLint *v);
-GLAPI void APIENTRY glWindowPos4sMESA (GLshort x, GLshort y, GLshort z, GLshort w);
-GLAPI void APIENTRY glWindowPos4svMESA (const GLshort *v);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLWINDOWPOS2DMESAPROC) (GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2DVMESAPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2FMESAPROC) (GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2FVMESAPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2IMESAPROC) (GLint x, GLint y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2IVMESAPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS2SMESAPROC) (GLshort x, GLshort y);
-typedef void (APIENTRYP PFNGLWINDOWPOS2SVMESAPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3DMESAPROC) (GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3DVMESAPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3FMESAPROC) (GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3FVMESAPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3IMESAPROC) (GLint x, GLint y, GLint z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3IVMESAPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS3SMESAPROC) (GLshort x, GLshort y, GLshort z);
-typedef void (APIENTRYP PFNGLWINDOWPOS3SVMESAPROC) (const GLshort *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS4DMESAPROC) (GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLWINDOWPOS4DVMESAPROC) (const GLdouble *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS4FMESAPROC) (GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLWINDOWPOS4FVMESAPROC) (const GLfloat *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS4IMESAPROC) (GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLWINDOWPOS4IVMESAPROC) (const GLint *v);
-typedef void (APIENTRYP PFNGLWINDOWPOS4SMESAPROC) (GLshort x, GLshort y, GLshort z, GLshort w);
-typedef void (APIENTRYP PFNGLWINDOWPOS4SVMESAPROC) (const GLshort *v);
-#endif
+#ifndef GL_NV_shader_buffer_store
+#define GL_NV_shader_buffer_store 1
+#define GL_SHADER_GLOBAL_ACCESS_BARRIER_BIT_NV 0x00000010
+#endif /* GL_NV_shader_buffer_store */
 
-#ifndef GL_IBM_cull_vertex
-#define GL_IBM_cull_vertex 1
-#endif
+#ifndef GL_NV_shader_storage_buffer_object
+#define GL_NV_shader_storage_buffer_object 1
+#endif /* GL_NV_shader_storage_buffer_object */
 
-#ifndef GL_IBM_multimode_draw_arrays
-#define GL_IBM_multimode_draw_arrays 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMultiModeDrawArraysIBM (const GLenum *mode, const GLint *first, const GLsizei *count, GLsizei primcount, GLint modestride);
-GLAPI void APIENTRY glMultiModeDrawElementsIBM (const GLenum *mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei primcount, GLint modestride);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMULTIMODEDRAWARRAYSIBMPROC) (const GLenum *mode, const GLint *first, const GLsizei *count, GLsizei primcount, GLint modestride);
-typedef void (APIENTRYP PFNGLMULTIMODEDRAWELEMENTSIBMPROC) (const GLenum *mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei primcount, GLint modestride);
-#endif
+#ifndef GL_NV_shader_thread_group
+#define GL_NV_shader_thread_group 1
+#define GL_WARP_SIZE_NV                   0x9339
+#define GL_WARPS_PER_SM_NV                0x933A
+#define GL_SM_COUNT_NV                    0x933B
+#endif /* GL_NV_shader_thread_group */
 
-#ifndef GL_IBM_vertex_array_lists
-#define GL_IBM_vertex_array_lists 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColorPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glSecondaryColorPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glEdgeFlagPointerListIBM (GLint stride, const GLboolean* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glFogCoordPointerListIBM (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glIndexPointerListIBM (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glNormalPointerListIBM (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glTexCoordPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-GLAPI void APIENTRY glVertexPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLORPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLEDGEFLAGPOINTERLISTIBMPROC) (GLint stride, const GLboolean* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLFOGCOORDPOINTERLISTIBMPROC) (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLINDEXPOINTERLISTIBMPROC) (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLNORMALPOINTERLISTIBMPROC) (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLTEXCOORDPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-typedef void (APIENTRYP PFNGLVERTEXPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride);
-#endif
+#ifndef GL_NV_shader_thread_shuffle
+#define GL_NV_shader_thread_shuffle 1
+#endif /* GL_NV_shader_thread_shuffle */
 
-#ifndef GL_SGIX_subsample
-#define GL_SGIX_subsample 1
-#endif
+#ifndef GL_NV_tessellation_program5
+#define GL_NV_tessellation_program5 1
+#define GL_MAX_PROGRAM_PATCH_ATTRIBS_NV   0x86D8
+#define GL_TESS_CONTROL_PROGRAM_NV        0x891E
+#define GL_TESS_EVALUATION_PROGRAM_NV     0x891F
+#define GL_TESS_CONTROL_PROGRAM_PARAMETER_BUFFER_NV 0x8C74
+#define GL_TESS_EVALUATION_PROGRAM_PARAMETER_BUFFER_NV 0x8C75
+#endif /* GL_NV_tessellation_program5 */
 
-#ifndef GL_SGIX_ycrcba
-#define GL_SGIX_ycrcba 1
-#endif
+#ifndef GL_NV_texgen_emboss
+#define GL_NV_texgen_emboss 1
+#define GL_EMBOSS_LIGHT_NV                0x855D
+#define GL_EMBOSS_CONSTANT_NV             0x855E
+#define GL_EMBOSS_MAP_NV                  0x855F
+#endif /* GL_NV_texgen_emboss */
 
-#ifndef GL_SGIX_ycrcb_subsample
-#define GL_SGIX_ycrcb_subsample 1
-#endif
+#ifndef GL_NV_texgen_reflection
+#define GL_NV_texgen_reflection 1
+#define GL_NORMAL_MAP_NV                  0x8511
+#define GL_REFLECTION_MAP_NV              0x8512
+#endif /* GL_NV_texgen_reflection */
 
-#ifndef GL_SGIX_depth_pass_instrument
-#define GL_SGIX_depth_pass_instrument 1
+#ifndef GL_NV_texture_barrier
+#define GL_NV_texture_barrier 1
+typedef void (APIENTRYP PFNGLTEXTUREBARRIERNVPROC) (void);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glTextureBarrierNV (void);
 #endif
+#endif /* GL_NV_texture_barrier */
 
-#ifndef GL_3DFX_texture_compression_FXT1
-#define GL_3DFX_texture_compression_FXT1 1
-#endif
+#ifndef GL_NV_texture_compression_vtc
+#define GL_NV_texture_compression_vtc 1
+#endif /* GL_NV_texture_compression_vtc */
 
-#ifndef GL_3DFX_multisample
-#define GL_3DFX_multisample 1
-#endif
+#ifndef GL_NV_texture_env_combine4
+#define GL_NV_texture_env_combine4 1
+#define GL_COMBINE4_NV                    0x8503
+#define GL_SOURCE3_RGB_NV                 0x8583
+#define GL_SOURCE3_ALPHA_NV               0x858B
+#define GL_OPERAND3_RGB_NV                0x8593
+#define GL_OPERAND3_ALPHA_NV              0x859B
+#endif /* GL_NV_texture_env_combine4 */
 
-#ifndef GL_3DFX_tbuffer
-#define GL_3DFX_tbuffer 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTbufferMask3DFX (GLuint mask);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTBUFFERMASK3DFXPROC) (GLuint mask);
-#endif
+#ifndef GL_NV_texture_expand_normal
+#define GL_NV_texture_expand_normal 1
+#define GL_TEXTURE_UNSIGNED_REMAP_MODE_NV 0x888F
+#endif /* GL_NV_texture_expand_normal */
 
-#ifndef GL_EXT_multisample
-#define GL_EXT_multisample 1
+#ifndef GL_NV_texture_multisample
+#define GL_NV_texture_multisample 1
+#define GL_TEXTURE_COVERAGE_SAMPLES_NV    0x9045
+#define GL_TEXTURE_COLOR_SAMPLES_NV       0x9046
+typedef void (APIENTRYP PFNGLTEXIMAGE2DMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
+typedef void (APIENTRYP PFNGLTEXIMAGE3DMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DMULTISAMPLENVPROC) (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DMULTISAMPLENVPROC) (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DMULTISAMPLECOVERAGENVPROC) (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
+typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DMULTISAMPLECOVERAGENVPROC) (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSampleMaskEXT (GLclampf value, GLboolean invert);
-GLAPI void APIENTRY glSamplePatternEXT (GLenum pattern);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSAMPLEMASKEXTPROC) (GLclampf value, GLboolean invert);
-typedef void (APIENTRYP PFNGLSAMPLEPATTERNEXTPROC) (GLenum pattern);
+GLAPI void APIENTRY glTexImage2DMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
+GLAPI void APIENTRY glTexImage3DMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
+GLAPI void APIENTRY glTextureImage2DMultisampleNV (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
+GLAPI void APIENTRY glTextureImage3DMultisampleNV (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
+GLAPI void APIENTRY glTextureImage2DMultisampleCoverageNV (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
+GLAPI void APIENTRY glTextureImage3DMultisampleCoverageNV (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
 #endif
+#endif /* GL_NV_texture_multisample */
 
-#ifndef GL_SGIX_vertex_preclip
-#define GL_SGIX_vertex_preclip 1
-#endif
+#ifndef GL_NV_texture_rectangle
+#define GL_NV_texture_rectangle 1
+#define GL_TEXTURE_RECTANGLE_NV           0x84F5
+#define GL_TEXTURE_BINDING_RECTANGLE_NV   0x84F6
+#define GL_PROXY_TEXTURE_RECTANGLE_NV     0x84F7
+#define GL_MAX_RECTANGLE_TEXTURE_SIZE_NV  0x84F8
+#endif /* GL_NV_texture_rectangle */
 
-#ifndef GL_SGIX_convolution_accuracy
-#define GL_SGIX_convolution_accuracy 1
-#endif
+#ifndef GL_NV_texture_shader
+#define GL_NV_texture_shader 1
+#define GL_OFFSET_TEXTURE_RECTANGLE_NV    0x864C
+#define GL_OFFSET_TEXTURE_RECTANGLE_SCALE_NV 0x864D
+#define GL_DOT_PRODUCT_TEXTURE_RECTANGLE_NV 0x864E
+#define GL_RGBA_UNSIGNED_DOT_PRODUCT_MAPPING_NV 0x86D9
+#define GL_UNSIGNED_INT_S8_S8_8_8_NV      0x86DA
+#define GL_UNSIGNED_INT_8_8_S8_S8_REV_NV  0x86DB
+#define GL_DSDT_MAG_INTENSITY_NV          0x86DC
+#define GL_SHADER_CONSISTENT_NV           0x86DD
+#define GL_TEXTURE_SHADER_NV              0x86DE
+#define GL_SHADER_OPERATION_NV            0x86DF
+#define GL_CULL_MODES_NV                  0x86E0
+#define GL_OFFSET_TEXTURE_MATRIX_NV       0x86E1
+#define GL_OFFSET_TEXTURE_SCALE_NV        0x86E2
+#define GL_OFFSET_TEXTURE_BIAS_NV         0x86E3
+#define GL_OFFSET_TEXTURE_2D_MATRIX_NV    0x86E1
+#define GL_OFFSET_TEXTURE_2D_SCALE_NV     0x86E2
+#define GL_OFFSET_TEXTURE_2D_BIAS_NV      0x86E3
+#define GL_PREVIOUS_TEXTURE_INPUT_NV      0x86E4
+#define GL_CONST_EYE_NV                   0x86E5
+#define GL_PASS_THROUGH_NV                0x86E6
+#define GL_CULL_FRAGMENT_NV               0x86E7
+#define GL_OFFSET_TEXTURE_2D_NV           0x86E8
+#define GL_DEPENDENT_AR_TEXTURE_2D_NV     0x86E9
+#define GL_DEPENDENT_GB_TEXTURE_2D_NV     0x86EA
+#define GL_DOT_PRODUCT_NV                 0x86EC
+#define GL_DOT_PRODUCT_DEPTH_REPLACE_NV   0x86ED
+#define GL_DOT_PRODUCT_TEXTURE_2D_NV      0x86EE
+#define GL_DOT_PRODUCT_TEXTURE_CUBE_MAP_NV 0x86F0
+#define GL_DOT_PRODUCT_DIFFUSE_CUBE_MAP_NV 0x86F1
+#define GL_DOT_PRODUCT_REFLECT_CUBE_MAP_NV 0x86F2
+#define GL_DOT_PRODUCT_CONST_EYE_REFLECT_CUBE_MAP_NV 0x86F3
+#define GL_HILO_NV                        0x86F4
+#define GL_DSDT_NV                        0x86F5
+#define GL_DSDT_MAG_NV                    0x86F6
+#define GL_DSDT_MAG_VIB_NV                0x86F7
+#define GL_HILO16_NV                      0x86F8
+#define GL_SIGNED_HILO_NV                 0x86F9
+#define GL_SIGNED_HILO16_NV               0x86FA
+#define GL_SIGNED_RGBA_NV                 0x86FB
+#define GL_SIGNED_RGBA8_NV                0x86FC
+#define GL_SIGNED_RGB_NV                  0x86FE
+#define GL_SIGNED_RGB8_NV                 0x86FF
+#define GL_SIGNED_LUMINANCE_NV            0x8701
+#define GL_SIGNED_LUMINANCE8_NV           0x8702
+#define GL_SIGNED_LUMINANCE_ALPHA_NV      0x8703
+#define GL_SIGNED_LUMINANCE8_ALPHA8_NV    0x8704
+#define GL_SIGNED_ALPHA_NV                0x8705
+#define GL_SIGNED_ALPHA8_NV               0x8706
+#define GL_SIGNED_INTENSITY_NV            0x8707
+#define GL_SIGNED_INTENSITY8_NV           0x8708
+#define GL_DSDT8_NV                       0x8709
+#define GL_DSDT8_MAG8_NV                  0x870A
+#define GL_DSDT8_MAG8_INTENSITY8_NV       0x870B
+#define GL_SIGNED_RGB_UNSIGNED_ALPHA_NV   0x870C
+#define GL_SIGNED_RGB8_UNSIGNED_ALPHA8_NV 0x870D
+#define GL_HI_SCALE_NV                    0x870E
+#define GL_LO_SCALE_NV                    0x870F
+#define GL_DS_SCALE_NV                    0x8710
+#define GL_DT_SCALE_NV                    0x8711
+#define GL_MAGNITUDE_SCALE_NV             0x8712
+#define GL_VIBRANCE_SCALE_NV              0x8713
+#define GL_HI_BIAS_NV                     0x8714
+#define GL_LO_BIAS_NV                     0x8715
+#define GL_DS_BIAS_NV                     0x8716
+#define GL_DT_BIAS_NV                     0x8717
+#define GL_MAGNITUDE_BIAS_NV              0x8718
+#define GL_VIBRANCE_BIAS_NV               0x8719
+#define GL_TEXTURE_BORDER_VALUES_NV       0x871A
+#define GL_TEXTURE_HI_SIZE_NV             0x871B
+#define GL_TEXTURE_LO_SIZE_NV             0x871C
+#define GL_TEXTURE_DS_SIZE_NV             0x871D
+#define GL_TEXTURE_DT_SIZE_NV             0x871E
+#define GL_TEXTURE_MAG_SIZE_NV            0x871F
+#endif /* GL_NV_texture_shader */
 
-#ifndef GL_SGIX_resample
-#define GL_SGIX_resample 1
-#endif
+#ifndef GL_NV_texture_shader2
+#define GL_NV_texture_shader2 1
+#define GL_DOT_PRODUCT_TEXTURE_3D_NV      0x86EF
+#endif /* GL_NV_texture_shader2 */
 
-#ifndef GL_SGIS_point_line_texgen
-#define GL_SGIS_point_line_texgen 1
-#endif
+#ifndef GL_NV_texture_shader3
+#define GL_NV_texture_shader3 1
+#define GL_OFFSET_PROJECTIVE_TEXTURE_2D_NV 0x8850
+#define GL_OFFSET_PROJECTIVE_TEXTURE_2D_SCALE_NV 0x8851
+#define GL_OFFSET_PROJECTIVE_TEXTURE_RECTANGLE_NV 0x8852
+#define GL_OFFSET_PROJECTIVE_TEXTURE_RECTANGLE_SCALE_NV 0x8853
+#define GL_OFFSET_HILO_TEXTURE_2D_NV      0x8854
+#define GL_OFFSET_HILO_TEXTURE_RECTANGLE_NV 0x8855
+#define GL_OFFSET_HILO_PROJECTIVE_TEXTURE_2D_NV 0x8856
+#define GL_OFFSET_HILO_PROJECTIVE_TEXTURE_RECTANGLE_NV 0x8857
+#define GL_DEPENDENT_HILO_TEXTURE_2D_NV   0x8858
+#define GL_DEPENDENT_RGB_TEXTURE_3D_NV    0x8859
+#define GL_DEPENDENT_RGB_TEXTURE_CUBE_MAP_NV 0x885A
+#define GL_DOT_PRODUCT_PASS_THROUGH_NV    0x885B
+#define GL_DOT_PRODUCT_TEXTURE_1D_NV      0x885C
+#define GL_DOT_PRODUCT_AFFINE_DEPTH_REPLACE_NV 0x885D
+#define GL_HILO8_NV                       0x885E
+#define GL_SIGNED_HILO8_NV                0x885F
+#define GL_FORCE_BLUE_TO_ONE_NV           0x8860
+#endif /* GL_NV_texture_shader3 */
 
-#ifndef GL_SGIS_texture_color_mask
-#define GL_SGIS_texture_color_mask 1
+#ifndef GL_NV_transform_feedback
+#define GL_NV_transform_feedback 1
+#define GL_BACK_PRIMARY_COLOR_NV          0x8C77
+#define GL_BACK_SECONDARY_COLOR_NV        0x8C78
+#define GL_TEXTURE_COORD_NV               0x8C79
+#define GL_CLIP_DISTANCE_NV               0x8C7A
+#define GL_VERTEX_ID_NV                   0x8C7B
+#define GL_PRIMITIVE_ID_NV                0x8C7C
+#define GL_GENERIC_ATTRIB_NV              0x8C7D
+#define GL_TRANSFORM_FEEDBACK_ATTRIBS_NV  0x8C7E
+#define GL_TRANSFORM_FEEDBACK_BUFFER_MODE_NV 0x8C7F
+#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS_NV 0x8C80
+#define GL_ACTIVE_VARYINGS_NV             0x8C81
+#define GL_ACTIVE_VARYING_MAX_LENGTH_NV   0x8C82
+#define GL_TRANSFORM_FEEDBACK_VARYINGS_NV 0x8C83
+#define GL_TRANSFORM_FEEDBACK_BUFFER_START_NV 0x8C84
+#define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE_NV 0x8C85
+#define GL_TRANSFORM_FEEDBACK_RECORD_NV   0x8C86
+#define GL_PRIMITIVES_GENERATED_NV        0x8C87
+#define GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN_NV 0x8C88
+#define GL_RASTERIZER_DISCARD_NV          0x8C89
+#define GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS_NV 0x8C8A
+#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS_NV 0x8C8B
+#define GL_INTERLEAVED_ATTRIBS_NV         0x8C8C
+#define GL_SEPARATE_ATTRIBS_NV            0x8C8D
+#define GL_TRANSFORM_FEEDBACK_BUFFER_NV   0x8C8E
+#define GL_TRANSFORM_FEEDBACK_BUFFER_BINDING_NV 0x8C8F
+#define GL_LAYER_NV                       0x8DAA
+#define GL_NEXT_BUFFER_NV                 -2
+#define GL_SKIP_COMPONENTS4_NV            -3
+#define GL_SKIP_COMPONENTS3_NV            -4
+#define GL_SKIP_COMPONENTS2_NV            -5
+#define GL_SKIP_COMPONENTS1_NV            -6
+typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKNVPROC) (GLenum primitiveMode);
+typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKNVPROC) (void);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKATTRIBSNVPROC) (GLsizei count, const GLint *attribs, GLenum bufferMode);
+typedef void (APIENTRYP PFNGLBINDBUFFERRANGENVPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+typedef void (APIENTRYP PFNGLBINDBUFFEROFFSETNVPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
+typedef void (APIENTRYP PFNGLBINDBUFFERBASENVPROC) (GLenum target, GLuint index, GLuint buffer);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSNVPROC) (GLuint program, GLsizei count, const GLint *locations, GLenum bufferMode);
+typedef void (APIENTRYP PFNGLACTIVEVARYINGNVPROC) (GLuint program, const GLchar *name);
+typedef GLint (APIENTRYP PFNGLGETVARYINGLOCATIONNVPROC) (GLuint program, const GLchar *name);
+typedef void (APIENTRYP PFNGLGETACTIVEVARYINGNVPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
+typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGNVPROC) (GLuint program, GLuint index, GLint *location);
+typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKSTREAMATTRIBSNVPROC) (GLsizei count, const GLint *attribs, GLsizei nbuffers, const GLint *bufstreams, GLenum bufferMode);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTextureColorMaskSGIS (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXTURECOLORMASKSGISPROC) (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
+GLAPI void APIENTRY glBeginTransformFeedbackNV (GLenum primitiveMode);
+GLAPI void APIENTRY glEndTransformFeedbackNV (void);
+GLAPI void APIENTRY glTransformFeedbackAttribsNV (GLsizei count, const GLint *attribs, GLenum bufferMode);
+GLAPI void APIENTRY glBindBufferRangeNV (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
+GLAPI void APIENTRY glBindBufferOffsetNV (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
+GLAPI void APIENTRY glBindBufferBaseNV (GLenum target, GLuint index, GLuint buffer);
+GLAPI void APIENTRY glTransformFeedbackVaryingsNV (GLuint program, GLsizei count, const GLint *locations, GLenum bufferMode);
+GLAPI void APIENTRY glActiveVaryingNV (GLuint program, const GLchar *name);
+GLAPI GLint APIENTRY glGetVaryingLocationNV (GLuint program, const GLchar *name);
+GLAPI void APIENTRY glGetActiveVaryingNV (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
+GLAPI void APIENTRY glGetTransformFeedbackVaryingNV (GLuint program, GLuint index, GLint *location);
+GLAPI void APIENTRY glTransformFeedbackStreamAttribsNV (GLsizei count, const GLint *attribs, GLsizei nbuffers, const GLint *bufstreams, GLenum bufferMode);
 #endif
+#endif /* GL_NV_transform_feedback */
 
-#ifndef GL_SGIX_igloo_interface
-#define GL_SGIX_igloo_interface 1
+#ifndef GL_NV_transform_feedback2
+#define GL_NV_transform_feedback2 1
+#define GL_TRANSFORM_FEEDBACK_NV          0x8E22
+#define GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED_NV 0x8E23
+#define GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE_NV 0x8E24
+#define GL_TRANSFORM_FEEDBACK_BINDING_NV  0x8E25
+typedef void (APIENTRYP PFNGLBINDTRANSFORMFEEDBACKNVPROC) (GLenum target, GLuint id);
+typedef void (APIENTRYP PFNGLDELETETRANSFORMFEEDBACKSNVPROC) (GLsizei n, const GLuint *ids);
+typedef void (APIENTRYP PFNGLGENTRANSFORMFEEDBACKSNVPROC) (GLsizei n, GLuint *ids);
+typedef GLboolean (APIENTRYP PFNGLISTRANSFORMFEEDBACKNVPROC) (GLuint id);
+typedef void (APIENTRYP PFNGLPAUSETRANSFORMFEEDBACKNVPROC) (void);
+typedef void (APIENTRYP PFNGLRESUMETRANSFORMFEEDBACKNVPROC) (void);
+typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKNVPROC) (GLenum mode, GLuint id);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glIglooInterfaceSGIX (GLenum pname, const GLvoid *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLIGLOOINTERFACESGIXPROC) (GLenum pname, const GLvoid *params);
-#endif
-
-#ifndef GL_EXT_texture_env_dot3
-#define GL_EXT_texture_env_dot3 1
-#endif
-
-#ifndef GL_ATI_texture_mirror_once
-#define GL_ATI_texture_mirror_once 1
+GLAPI void APIENTRY glBindTransformFeedbackNV (GLenum target, GLuint id);
+GLAPI void APIENTRY glDeleteTransformFeedbacksNV (GLsizei n, const GLuint *ids);
+GLAPI void APIENTRY glGenTransformFeedbacksNV (GLsizei n, GLuint *ids);
+GLAPI GLboolean APIENTRY glIsTransformFeedbackNV (GLuint id);
+GLAPI void APIENTRY glPauseTransformFeedbackNV (void);
+GLAPI void APIENTRY glResumeTransformFeedbackNV (void);
+GLAPI void APIENTRY glDrawTransformFeedbackNV (GLenum mode, GLuint id);
 #endif
+#endif /* GL_NV_transform_feedback2 */
 
-#ifndef GL_NV_fence
-#define GL_NV_fence 1
+#ifndef GL_NV_vdpau_interop
+#define GL_NV_vdpau_interop 1
+typedef GLintptr GLvdpauSurfaceNV;
+#define GL_SURFACE_STATE_NV               0x86EB
+#define GL_SURFACE_REGISTERED_NV          0x86FD
+#define GL_SURFACE_MAPPED_NV              0x8700
+#define GL_WRITE_DISCARD_NV               0x88BE
+typedef void (APIENTRYP PFNGLVDPAUINITNVPROC) (const void *vdpDevice, const void *getProcAddress);
+typedef void (APIENTRYP PFNGLVDPAUFININVPROC) (void);
+typedef GLvdpauSurfaceNV (APIENTRYP PFNGLVDPAUREGISTERVIDEOSURFACENVPROC) (const void *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
+typedef GLvdpauSurfaceNV (APIENTRYP PFNGLVDPAUREGISTEROUTPUTSURFACENVPROC) (const void *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
+typedef GLboolean (APIENTRYP PFNGLVDPAUISSURFACENVPROC) (GLvdpauSurfaceNV surface);
+typedef void (APIENTRYP PFNGLVDPAUUNREGISTERSURFACENVPROC) (GLvdpauSurfaceNV surface);
+typedef void (APIENTRYP PFNGLVDPAUGETSURFACEIVNVPROC) (GLvdpauSurfaceNV surface, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
+typedef void (APIENTRYP PFNGLVDPAUSURFACEACCESSNVPROC) (GLvdpauSurfaceNV surface, GLenum access);
+typedef void (APIENTRYP PFNGLVDPAUMAPSURFACESNVPROC) (GLsizei numSurfaces, const GLvdpauSurfaceNV *surfaces);
+typedef void (APIENTRYP PFNGLVDPAUUNMAPSURFACESNVPROC) (GLsizei numSurface, const GLvdpauSurfaceNV *surfaces);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDeleteFencesNV (GLsizei n, const GLuint *fences);
-GLAPI void APIENTRY glGenFencesNV (GLsizei n, GLuint *fences);
-GLAPI GLboolean APIENTRY glIsFenceNV (GLuint fence);
-GLAPI GLboolean APIENTRY glTestFenceNV (GLuint fence);
-GLAPI void APIENTRY glGetFenceivNV (GLuint fence, GLenum pname, GLint *params);
-GLAPI void APIENTRY glFinishFenceNV (GLuint fence);
-GLAPI void APIENTRY glSetFenceNV (GLuint fence, GLenum condition);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDELETEFENCESNVPROC) (GLsizei n, const GLuint *fences);
-typedef void (APIENTRYP PFNGLGENFENCESNVPROC) (GLsizei n, GLuint *fences);
-typedef GLboolean (APIENTRYP PFNGLISFENCENVPROC) (GLuint fence);
-typedef GLboolean (APIENTRYP PFNGLTESTFENCENVPROC) (GLuint fence);
-typedef void (APIENTRYP PFNGLGETFENCEIVNVPROC) (GLuint fence, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLFINISHFENCENVPROC) (GLuint fence);
-typedef void (APIENTRYP PFNGLSETFENCENVPROC) (GLuint fence, GLenum condition);
+GLAPI void APIENTRY glVDPAUInitNV (const void *vdpDevice, const void *getProcAddress);
+GLAPI void APIENTRY glVDPAUFiniNV (void);
+GLAPI GLvdpauSurfaceNV APIENTRY glVDPAURegisterVideoSurfaceNV (const void *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
+GLAPI GLvdpauSurfaceNV APIENTRY glVDPAURegisterOutputSurfaceNV (const void *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
+GLAPI GLboolean APIENTRY glVDPAUIsSurfaceNV (GLvdpauSurfaceNV surface);
+GLAPI void APIENTRY glVDPAUUnregisterSurfaceNV (GLvdpauSurfaceNV surface);
+GLAPI void APIENTRY glVDPAUGetSurfaceivNV (GLvdpauSurfaceNV surface, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
+GLAPI void APIENTRY glVDPAUSurfaceAccessNV (GLvdpauSurfaceNV surface, GLenum access);
+GLAPI void APIENTRY glVDPAUMapSurfacesNV (GLsizei numSurfaces, const GLvdpauSurfaceNV *surfaces);
+GLAPI void APIENTRY glVDPAUUnmapSurfacesNV (GLsizei numSurface, const GLvdpauSurfaceNV *surfaces);
 #endif
+#endif /* GL_NV_vdpau_interop */
 
-#ifndef GL_NV_evaluators
-#define GL_NV_evaluators 1
+#ifndef GL_NV_vertex_array_range
+#define GL_NV_vertex_array_range 1
+#define GL_VERTEX_ARRAY_RANGE_NV          0x851D
+#define GL_VERTEX_ARRAY_RANGE_LENGTH_NV   0x851E
+#define GL_VERTEX_ARRAY_RANGE_VALID_NV    0x851F
+#define GL_MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV 0x8520
+#define GL_VERTEX_ARRAY_RANGE_POINTER_NV  0x8521
+typedef void (APIENTRYP PFNGLFLUSHVERTEXARRAYRANGENVPROC) (void);
+typedef void (APIENTRYP PFNGLVERTEXARRAYRANGENVPROC) (GLsizei length, const void *pointer);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMapControlPointsNV (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLint uorder, GLint vorder, GLboolean packed, const GLvoid *points);
-GLAPI void APIENTRY glMapParameterivNV (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glMapParameterfvNV (GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glGetMapControlPointsNV (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLboolean packed, GLvoid *points);
-GLAPI void APIENTRY glGetMapParameterivNV (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMapParameterfvNV (GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMapAttribParameterivNV (GLenum target, GLuint index, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMapAttribParameterfvNV (GLenum target, GLuint index, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glEvalMapsNV (GLenum target, GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMAPCONTROLPOINTSNVPROC) (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLint uorder, GLint vorder, GLboolean packed, const GLvoid *points);
-typedef void (APIENTRYP PFNGLMAPPARAMETERIVNVPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLMAPPARAMETERFVNVPROC) (GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMAPCONTROLPOINTSNVPROC) (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLboolean packed, GLvoid *points);
-typedef void (APIENTRYP PFNGLGETMAPPARAMETERIVNVPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMAPPARAMETERFVNVPROC) (GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMAPATTRIBPARAMETERIVNVPROC) (GLenum target, GLuint index, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMAPATTRIBPARAMETERFVNVPROC) (GLenum target, GLuint index, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLEVALMAPSNVPROC) (GLenum target, GLenum mode);
+GLAPI void APIENTRY glFlushVertexArrayRangeNV (void);
+GLAPI void APIENTRY glVertexArrayRangeNV (GLsizei length, const void *pointer);
 #endif
+#endif /* GL_NV_vertex_array_range */
 
-#ifndef GL_NV_packed_depth_stencil
-#define GL_NV_packed_depth_stencil 1
-#endif
+#ifndef GL_NV_vertex_array_range2
+#define GL_NV_vertex_array_range2 1
+#define GL_VERTEX_ARRAY_RANGE_WITHOUT_FLUSH_NV 0x8533
+#endif /* GL_NV_vertex_array_range2 */
 
-#ifndef GL_NV_register_combiners2
-#define GL_NV_register_combiners2 1
+#ifndef GL_NV_vertex_attrib_integer_64bit
+#define GL_NV_vertex_attrib_integer_64bit 1
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1I64NVPROC) (GLuint index, GLint64EXT x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1I64VNVPROC) (GLuint index, const GLint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2I64VNVPROC) (GLuint index, const GLint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3I64VNVPROC) (GLuint index, const GLint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4I64VNVPROC) (GLuint index, const GLint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64NVPROC) (GLuint index, GLuint64EXT x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL2UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL3UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBL4UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLI64VNVPROC) (GLuint index, GLenum pname, GLint64EXT *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLUI64VNVPROC) (GLuint index, GLenum pname, GLuint64EXT *params);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBLFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLsizei stride);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCombinerStageParameterfvNV (GLenum stage, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glGetCombinerStageParameterfvNV (GLenum stage, GLenum pname, GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOMBINERSTAGEPARAMETERFVNVPROC) (GLenum stage, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETCOMBINERSTAGEPARAMETERFVNVPROC) (GLenum stage, GLenum pname, GLfloat *params);
-#endif
-
-#ifndef GL_NV_texture_compression_vtc
-#define GL_NV_texture_compression_vtc 1
-#endif
-
-#ifndef GL_NV_texture_rectangle
-#define GL_NV_texture_rectangle 1
-#endif
-
-#ifndef GL_NV_texture_shader
-#define GL_NV_texture_shader 1
-#endif
-
-#ifndef GL_NV_texture_shader2
-#define GL_NV_texture_shader2 1
+GLAPI void APIENTRY glVertexAttribL1i64NV (GLuint index, GLint64EXT x);
+GLAPI void APIENTRY glVertexAttribL2i64NV (GLuint index, GLint64EXT x, GLint64EXT y);
+GLAPI void APIENTRY glVertexAttribL3i64NV (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z);
+GLAPI void APIENTRY glVertexAttribL4i64NV (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
+GLAPI void APIENTRY glVertexAttribL1i64vNV (GLuint index, const GLint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL2i64vNV (GLuint index, const GLint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL3i64vNV (GLuint index, const GLint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL4i64vNV (GLuint index, const GLint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL1ui64NV (GLuint index, GLuint64EXT x);
+GLAPI void APIENTRY glVertexAttribL2ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y);
+GLAPI void APIENTRY glVertexAttribL3ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
+GLAPI void APIENTRY glVertexAttribL4ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
+GLAPI void APIENTRY glVertexAttribL1ui64vNV (GLuint index, const GLuint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL2ui64vNV (GLuint index, const GLuint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL3ui64vNV (GLuint index, const GLuint64EXT *v);
+GLAPI void APIENTRY glVertexAttribL4ui64vNV (GLuint index, const GLuint64EXT *v);
+GLAPI void APIENTRY glGetVertexAttribLi64vNV (GLuint index, GLenum pname, GLint64EXT *params);
+GLAPI void APIENTRY glGetVertexAttribLui64vNV (GLuint index, GLenum pname, GLuint64EXT *params);
+GLAPI void APIENTRY glVertexAttribLFormatNV (GLuint index, GLint size, GLenum type, GLsizei stride);
 #endif
+#endif /* GL_NV_vertex_attrib_integer_64bit */
 
-#ifndef GL_NV_vertex_array_range2
-#define GL_NV_vertex_array_range2 1
+#ifndef GL_NV_vertex_buffer_unified_memory
+#define GL_NV_vertex_buffer_unified_memory 1
+#define GL_VERTEX_ATTRIB_ARRAY_UNIFIED_NV 0x8F1E
+#define GL_ELEMENT_ARRAY_UNIFIED_NV       0x8F1F
+#define GL_VERTEX_ATTRIB_ARRAY_ADDRESS_NV 0x8F20
+#define GL_VERTEX_ARRAY_ADDRESS_NV        0x8F21
+#define GL_NORMAL_ARRAY_ADDRESS_NV        0x8F22
+#define GL_COLOR_ARRAY_ADDRESS_NV         0x8F23
+#define GL_INDEX_ARRAY_ADDRESS_NV         0x8F24
+#define GL_TEXTURE_COORD_ARRAY_ADDRESS_NV 0x8F25
+#define GL_EDGE_FLAG_ARRAY_ADDRESS_NV     0x8F26
+#define GL_SECONDARY_COLOR_ARRAY_ADDRESS_NV 0x8F27
+#define GL_FOG_COORD_ARRAY_ADDRESS_NV     0x8F28
+#define GL_ELEMENT_ARRAY_ADDRESS_NV       0x8F29
+#define GL_VERTEX_ATTRIB_ARRAY_LENGTH_NV  0x8F2A
+#define GL_VERTEX_ARRAY_LENGTH_NV         0x8F2B
+#define GL_NORMAL_ARRAY_LENGTH_NV         0x8F2C
+#define GL_COLOR_ARRAY_LENGTH_NV          0x8F2D
+#define GL_INDEX_ARRAY_LENGTH_NV          0x8F2E
+#define GL_TEXTURE_COORD_ARRAY_LENGTH_NV  0x8F2F
+#define GL_EDGE_FLAG_ARRAY_LENGTH_NV      0x8F30
+#define GL_SECONDARY_COLOR_ARRAY_LENGTH_NV 0x8F31
+#define GL_FOG_COORD_ARRAY_LENGTH_NV      0x8F32
+#define GL_ELEMENT_ARRAY_LENGTH_NV        0x8F33
+#define GL_DRAW_INDIRECT_UNIFIED_NV       0x8F40
+#define GL_DRAW_INDIRECT_ADDRESS_NV       0x8F41
+#define GL_DRAW_INDIRECT_LENGTH_NV        0x8F42
+typedef void (APIENTRYP PFNGLBUFFERADDRESSRANGENVPROC) (GLenum pname, GLuint index, GLuint64EXT address, GLsizeiptr length);
+typedef void (APIENTRYP PFNGLVERTEXFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLNORMALFORMATNVPROC) (GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLCOLORFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLINDEXFORMATNVPROC) (GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLTEXCOORDFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLEDGEFLAGFORMATNVPROC) (GLsizei stride);
+typedef void (APIENTRYP PFNGLSECONDARYCOLORFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLFOGCOORDFORMATNVPROC) (GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBIFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLsizei stride);
+typedef void (APIENTRYP PFNGLGETINTEGERUI64I_VNVPROC) (GLenum value, GLuint index, GLuint64EXT *result);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBufferAddressRangeNV (GLenum pname, GLuint index, GLuint64EXT address, GLsizeiptr length);
+GLAPI void APIENTRY glVertexFormatNV (GLint size, GLenum type, GLsizei stride);
+GLAPI void APIENTRY glNormalFormatNV (GLenum type, GLsizei stride);
+GLAPI void APIENTRY glColorFormatNV (GLint size, GLenum type, GLsizei stride);
+GLAPI void APIENTRY glIndexFormatNV (GLenum type, GLsizei stride);
+GLAPI void APIENTRY glTexCoordFormatNV (GLint size, GLenum type, GLsizei stride);
+GLAPI void APIENTRY glEdgeFlagFormatNV (GLsizei stride);
+GLAPI void APIENTRY glSecondaryColorFormatNV (GLint size, GLenum type, GLsizei stride);
+GLAPI void APIENTRY glFogCoordFormatNV (GLenum type, GLsizei stride);
+GLAPI void APIENTRY glVertexAttribFormatNV (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride);
+GLAPI void APIENTRY glVertexAttribIFormatNV (GLuint index, GLint size, GLenum type, GLsizei stride);
+GLAPI void APIENTRY glGetIntegerui64i_vNV (GLenum value, GLuint index, GLuint64EXT *result);
 #endif
+#endif /* GL_NV_vertex_buffer_unified_memory */
 
 #ifndef GL_NV_vertex_program
 #define GL_NV_vertex_program 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLboolean APIENTRY glAreProgramsResidentNV (GLsizei n, const GLuint *programs, GLboolean *residences);
-GLAPI void APIENTRY glBindProgramNV (GLenum target, GLuint id);
-GLAPI void APIENTRY glDeleteProgramsNV (GLsizei n, const GLuint *programs);
-GLAPI void APIENTRY glExecuteProgramNV (GLenum target, GLuint id, const GLfloat *params);
-GLAPI void APIENTRY glGenProgramsNV (GLsizei n, GLuint *programs);
-GLAPI void APIENTRY glGetProgramParameterdvNV (GLenum target, GLuint index, GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glGetProgramParameterfvNV (GLenum target, GLuint index, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetProgramivNV (GLuint id, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetProgramStringNV (GLuint id, GLenum pname, GLubyte *program);
-GLAPI void APIENTRY glGetTrackMatrixivNV (GLenum target, GLuint address, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVertexAttribdvNV (GLuint index, GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glGetVertexAttribfvNV (GLuint index, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetVertexAttribivNV (GLuint index, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVertexAttribPointervNV (GLuint index, GLenum pname, GLvoid* *pointer);
-GLAPI GLboolean APIENTRY glIsProgramNV (GLuint id);
-GLAPI void APIENTRY glLoadProgramNV (GLenum target, GLuint id, GLsizei len, const GLubyte *program);
-GLAPI void APIENTRY glProgramParameter4dNV (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glProgramParameter4dvNV (GLenum target, GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glProgramParameter4fNV (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glProgramParameter4fvNV (GLenum target, GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glProgramParameters4dvNV (GLenum target, GLuint index, GLsizei count, const GLdouble *v);
-GLAPI void APIENTRY glProgramParameters4fvNV (GLenum target, GLuint index, GLsizei count, const GLfloat *v);
-GLAPI void APIENTRY glRequestResidentProgramsNV (GLsizei n, const GLuint *programs);
-GLAPI void APIENTRY glTrackMatrixNV (GLenum target, GLuint address, GLenum matrix, GLenum transform);
-GLAPI void APIENTRY glVertexAttribPointerNV (GLuint index, GLint fsize, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glVertexAttrib1dNV (GLuint index, GLdouble x);
-GLAPI void APIENTRY glVertexAttrib1dvNV (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib1fNV (GLuint index, GLfloat x);
-GLAPI void APIENTRY glVertexAttrib1fvNV (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib1sNV (GLuint index, GLshort x);
-GLAPI void APIENTRY glVertexAttrib1svNV (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib2dNV (GLuint index, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glVertexAttrib2dvNV (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib2fNV (GLuint index, GLfloat x, GLfloat y);
-GLAPI void APIENTRY glVertexAttrib2fvNV (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib2sNV (GLuint index, GLshort x, GLshort y);
-GLAPI void APIENTRY glVertexAttrib2svNV (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib3dNV (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glVertexAttrib3dvNV (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib3fNV (GLuint index, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glVertexAttrib3fvNV (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib3sNV (GLuint index, GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glVertexAttrib3svNV (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4dNV (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glVertexAttrib4dvNV (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttrib4fNV (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glVertexAttrib4fvNV (GLuint index, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttrib4sNV (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
-GLAPI void APIENTRY glVertexAttrib4svNV (GLuint index, const GLshort *v);
-GLAPI void APIENTRY glVertexAttrib4ubNV (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
-GLAPI void APIENTRY glVertexAttrib4ubvNV (GLuint index, const GLubyte *v);
-GLAPI void APIENTRY glVertexAttribs1dvNV (GLuint index, GLsizei count, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribs1fvNV (GLuint index, GLsizei count, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttribs1svNV (GLuint index, GLsizei count, const GLshort *v);
-GLAPI void APIENTRY glVertexAttribs2dvNV (GLuint index, GLsizei count, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribs2fvNV (GLuint index, GLsizei count, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttribs2svNV (GLuint index, GLsizei count, const GLshort *v);
-GLAPI void APIENTRY glVertexAttribs3dvNV (GLuint index, GLsizei count, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribs3fvNV (GLuint index, GLsizei count, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttribs3svNV (GLuint index, GLsizei count, const GLshort *v);
-GLAPI void APIENTRY glVertexAttribs4dvNV (GLuint index, GLsizei count, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribs4fvNV (GLuint index, GLsizei count, const GLfloat *v);
-GLAPI void APIENTRY glVertexAttribs4svNV (GLuint index, GLsizei count, const GLshort *v);
-GLAPI void APIENTRY glVertexAttribs4ubvNV (GLuint index, GLsizei count, const GLubyte *v);
-#endif /* GL_GLEXT_PROTOTYPES */
+#define GL_VERTEX_PROGRAM_NV              0x8620
+#define GL_VERTEX_STATE_PROGRAM_NV        0x8621
+#define GL_ATTRIB_ARRAY_SIZE_NV           0x8623
+#define GL_ATTRIB_ARRAY_STRIDE_NV         0x8624
+#define GL_ATTRIB_ARRAY_TYPE_NV           0x8625
+#define GL_CURRENT_ATTRIB_NV              0x8626
+#define GL_PROGRAM_LENGTH_NV              0x8627
+#define GL_PROGRAM_STRING_NV              0x8628
+#define GL_MODELVIEW_PROJECTION_NV        0x8629
+#define GL_IDENTITY_NV                    0x862A
+#define GL_INVERSE_NV                     0x862B
+#define GL_TRANSPOSE_NV                   0x862C
+#define GL_INVERSE_TRANSPOSE_NV           0x862D
+#define GL_MAX_TRACK_MATRIX_STACK_DEPTH_NV 0x862E
+#define GL_MAX_TRACK_MATRICES_NV          0x862F
+#define GL_MATRIX0_NV                     0x8630
+#define GL_MATRIX1_NV                     0x8631
+#define GL_MATRIX2_NV                     0x8632
+#define GL_MATRIX3_NV                     0x8633
+#define GL_MATRIX4_NV                     0x8634
+#define GL_MATRIX5_NV                     0x8635
+#define GL_MATRIX6_NV                     0x8636
+#define GL_MATRIX7_NV                     0x8637
+#define GL_CURRENT_MATRIX_STACK_DEPTH_NV  0x8640
+#define GL_CURRENT_MATRIX_NV              0x8641
+#define GL_VERTEX_PROGRAM_POINT_SIZE_NV   0x8642
+#define GL_VERTEX_PROGRAM_TWO_SIDE_NV     0x8643
+#define GL_PROGRAM_PARAMETER_NV           0x8644
+#define GL_ATTRIB_ARRAY_POINTER_NV        0x8645
+#define GL_PROGRAM_TARGET_NV              0x8646
+#define GL_PROGRAM_RESIDENT_NV            0x8647
+#define GL_TRACK_MATRIX_NV                0x8648
+#define GL_TRACK_MATRIX_TRANSFORM_NV      0x8649
+#define GL_VERTEX_PROGRAM_BINDING_NV      0x864A
+#define GL_PROGRAM_ERROR_POSITION_NV      0x864B
+#define GL_VERTEX_ATTRIB_ARRAY0_NV        0x8650
+#define GL_VERTEX_ATTRIB_ARRAY1_NV        0x8651
+#define GL_VERTEX_ATTRIB_ARRAY2_NV        0x8652
+#define GL_VERTEX_ATTRIB_ARRAY3_NV        0x8653
+#define GL_VERTEX_ATTRIB_ARRAY4_NV        0x8654
+#define GL_VERTEX_ATTRIB_ARRAY5_NV        0x8655
+#define GL_VERTEX_ATTRIB_ARRAY6_NV        0x8656
+#define GL_VERTEX_ATTRIB_ARRAY7_NV        0x8657
+#define GL_VERTEX_ATTRIB_ARRAY8_NV        0x8658
+#define GL_VERTEX_ATTRIB_ARRAY9_NV        0x8659
+#define GL_VERTEX_ATTRIB_ARRAY10_NV       0x865A
+#define GL_VERTEX_ATTRIB_ARRAY11_NV       0x865B
+#define GL_VERTEX_ATTRIB_ARRAY12_NV       0x865C
+#define GL_VERTEX_ATTRIB_ARRAY13_NV       0x865D
+#define GL_VERTEX_ATTRIB_ARRAY14_NV       0x865E
+#define GL_VERTEX_ATTRIB_ARRAY15_NV       0x865F
+#define GL_MAP1_VERTEX_ATTRIB0_4_NV       0x8660
+#define GL_MAP1_VERTEX_ATTRIB1_4_NV       0x8661
+#define GL_MAP1_VERTEX_ATTRIB2_4_NV       0x8662
+#define GL_MAP1_VERTEX_ATTRIB3_4_NV       0x8663
+#define GL_MAP1_VERTEX_ATTRIB4_4_NV       0x8664
+#define GL_MAP1_VERTEX_ATTRIB5_4_NV       0x8665
+#define GL_MAP1_VERTEX_ATTRIB6_4_NV       0x8666
+#define GL_MAP1_VERTEX_ATTRIB7_4_NV       0x8667
+#define GL_MAP1_VERTEX_ATTRIB8_4_NV       0x8668
+#define GL_MAP1_VERTEX_ATTRIB9_4_NV       0x8669
+#define GL_MAP1_VERTEX_ATTRIB10_4_NV      0x866A
+#define GL_MAP1_VERTEX_ATTRIB11_4_NV      0x866B
+#define GL_MAP1_VERTEX_ATTRIB12_4_NV      0x866C
+#define GL_MAP1_VERTEX_ATTRIB13_4_NV      0x866D
+#define GL_MAP1_VERTEX_ATTRIB14_4_NV      0x866E
+#define GL_MAP1_VERTEX_ATTRIB15_4_NV      0x866F
+#define GL_MAP2_VERTEX_ATTRIB0_4_NV       0x8670
+#define GL_MAP2_VERTEX_ATTRIB1_4_NV       0x8671
+#define GL_MAP2_VERTEX_ATTRIB2_4_NV       0x8672
+#define GL_MAP2_VERTEX_ATTRIB3_4_NV       0x8673
+#define GL_MAP2_VERTEX_ATTRIB4_4_NV       0x8674
+#define GL_MAP2_VERTEX_ATTRIB5_4_NV       0x8675
+#define GL_MAP2_VERTEX_ATTRIB6_4_NV       0x8676
+#define GL_MAP2_VERTEX_ATTRIB7_4_NV       0x8677
+#define GL_MAP2_VERTEX_ATTRIB8_4_NV       0x8678
+#define GL_MAP2_VERTEX_ATTRIB9_4_NV       0x8679
+#define GL_MAP2_VERTEX_ATTRIB10_4_NV      0x867A
+#define GL_MAP2_VERTEX_ATTRIB11_4_NV      0x867B
+#define GL_MAP2_VERTEX_ATTRIB12_4_NV      0x867C
+#define GL_MAP2_VERTEX_ATTRIB13_4_NV      0x867D
+#define GL_MAP2_VERTEX_ATTRIB14_4_NV      0x867E
+#define GL_MAP2_VERTEX_ATTRIB15_4_NV      0x867F
 typedef GLboolean (APIENTRYP PFNGLAREPROGRAMSRESIDENTNVPROC) (GLsizei n, const GLuint *programs, GLboolean *residences);
 typedef void (APIENTRYP PFNGLBINDPROGRAMNVPROC) (GLenum target, GLuint id);
 typedef void (APIENTRYP PFNGLDELETEPROGRAMSNVPROC) (GLsizei n, const GLuint *programs);
@@ -10365,7 +10430,7 @@ typedef void (APIENTRYP PFNGLGETTRACKMATRIXIVNVPROC) (GLenum target, GLuint addr
 typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVNVPROC) (GLuint index, GLenum pname, GLdouble *params);
 typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVNVPROC) (GLuint index, GLenum pname, GLfloat *params);
 typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVNVPROC) (GLuint index, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVNVPROC) (GLuint index, GLenum pname, GLvoid* *pointer);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVNVPROC) (GLuint index, GLenum pname, void **pointer);
 typedef GLboolean (APIENTRYP PFNGLISPROGRAMNVPROC) (GLuint id);
 typedef void (APIENTRYP PFNGLLOADPROGRAMNVPROC) (GLenum target, GLuint id, GLsizei len, const GLubyte *program);
 typedef void (APIENTRYP PFNGLPROGRAMPARAMETER4DNVPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
@@ -10376,7 +10441,7 @@ typedef void (APIENTRYP PFNGLPROGRAMPARAMETERS4DVNVPROC) (GLenum target, GLuint
 typedef void (APIENTRYP PFNGLPROGRAMPARAMETERS4FVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *v);
 typedef void (APIENTRYP PFNGLREQUESTRESIDENTPROGRAMSNVPROC) (GLsizei n, const GLuint *programs);
 typedef void (APIENTRYP PFNGLTRACKMATRIXNVPROC) (GLenum target, GLuint address, GLenum matrix, GLenum transform);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERNVPROC) (GLuint index, GLint fsize, GLenum type, GLsizei stride, const GLvoid *pointer);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERNVPROC) (GLuint index, GLint fsize, GLenum type, GLsizei stride, const void *pointer);
 typedef void (APIENTRYP PFNGLVERTEXATTRIB1DNVPROC) (GLuint index, GLdouble x);
 typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVNVPROC) (GLuint index, const GLdouble *v);
 typedef void (APIENTRYP PFNGLVERTEXATTRIB1FNVPROC) (GLuint index, GLfloat x);
@@ -10416,1194 +10481,116 @@ typedef void (APIENTRYP PFNGLVERTEXATTRIBS4DVNVPROC) (GLuint index, GLsizei coun
 typedef void (APIENTRYP PFNGLVERTEXATTRIBS4FVNVPROC) (GLuint index, GLsizei count, const GLfloat *v);
 typedef void (APIENTRYP PFNGLVERTEXATTRIBS4SVNVPROC) (GLuint index, GLsizei count, const GLshort *v);
 typedef void (APIENTRYP PFNGLVERTEXATTRIBS4UBVNVPROC) (GLuint index, GLsizei count, const GLubyte *v);
-#endif
-
-#ifndef GL_SGIX_texture_coordinate_clamp
-#define GL_SGIX_texture_coordinate_clamp 1
-#endif
-
-#ifndef GL_SGIX_scalebias_hint
-#define GL_SGIX_scalebias_hint 1
-#endif
-
-#ifndef GL_OML_interlace
-#define GL_OML_interlace 1
-#endif
-
-#ifndef GL_OML_subsample
-#define GL_OML_subsample 1
-#endif
-
-#ifndef GL_OML_resample
-#define GL_OML_resample 1
-#endif
-
-#ifndef GL_NV_copy_depth_to_color
-#define GL_NV_copy_depth_to_color 1
-#endif
-
-#ifndef GL_ATI_envmap_bumpmap
-#define GL_ATI_envmap_bumpmap 1
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexBumpParameterivATI (GLenum pname, const GLint *param);
-GLAPI void APIENTRY glTexBumpParameterfvATI (GLenum pname, const GLfloat *param);
-GLAPI void APIENTRY glGetTexBumpParameterivATI (GLenum pname, GLint *param);
-GLAPI void APIENTRY glGetTexBumpParameterfvATI (GLenum pname, GLfloat *param);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXBUMPPARAMETERIVATIPROC) (GLenum pname, const GLint *param);
-typedef void (APIENTRYP PFNGLTEXBUMPPARAMETERFVATIPROC) (GLenum pname, const GLfloat *param);
-typedef void (APIENTRYP PFNGLGETTEXBUMPPARAMETERIVATIPROC) (GLenum pname, GLint *param);
-typedef void (APIENTRYP PFNGLGETTEXBUMPPARAMETERFVATIPROC) (GLenum pname, GLfloat *param);
-#endif
-
-#ifndef GL_ATI_fragment_shader
-#define GL_ATI_fragment_shader 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLuint APIENTRY glGenFragmentShadersATI (GLuint range);
-GLAPI void APIENTRY glBindFragmentShaderATI (GLuint id);
-GLAPI void APIENTRY glDeleteFragmentShaderATI (GLuint id);
-GLAPI void APIENTRY glBeginFragmentShaderATI (void);
-GLAPI void APIENTRY glEndFragmentShaderATI (void);
-GLAPI void APIENTRY glPassTexCoordATI (GLuint dst, GLuint coord, GLenum swizzle);
-GLAPI void APIENTRY glSampleMapATI (GLuint dst, GLuint interp, GLenum swizzle);
-GLAPI void APIENTRY glColorFragmentOp1ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
-GLAPI void APIENTRY glColorFragmentOp2ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
-GLAPI void APIENTRY glColorFragmentOp3ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
-GLAPI void APIENTRY glAlphaFragmentOp1ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
-GLAPI void APIENTRY glAlphaFragmentOp2ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
-GLAPI void APIENTRY glAlphaFragmentOp3ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
-GLAPI void APIENTRY glSetFragmentShaderConstantATI (GLuint dst, const GLfloat *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLuint (APIENTRYP PFNGLGENFRAGMENTSHADERSATIPROC) (GLuint range);
-typedef void (APIENTRYP PFNGLBINDFRAGMENTSHADERATIPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLDELETEFRAGMENTSHADERATIPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLBEGINFRAGMENTSHADERATIPROC) (void);
-typedef void (APIENTRYP PFNGLENDFRAGMENTSHADERATIPROC) (void);
-typedef void (APIENTRYP PFNGLPASSTEXCOORDATIPROC) (GLuint dst, GLuint coord, GLenum swizzle);
-typedef void (APIENTRYP PFNGLSAMPLEMAPATIPROC) (GLuint dst, GLuint interp, GLenum swizzle);
-typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP1ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
-typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP2ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
-typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP3ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
-typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP1ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod);
-typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP2ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod);
-typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP3ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod);
-typedef void (APIENTRYP PFNGLSETFRAGMENTSHADERCONSTANTATIPROC) (GLuint dst, const GLfloat *value);
-#endif
-
-#ifndef GL_ATI_pn_triangles
-#define GL_ATI_pn_triangles 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPNTrianglesiATI (GLenum pname, GLint param);
-GLAPI void APIENTRY glPNTrianglesfATI (GLenum pname, GLfloat param);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPNTRIANGLESIATIPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLPNTRIANGLESFATIPROC) (GLenum pname, GLfloat param);
-#endif
-
-#ifndef GL_ATI_vertex_array_object
-#define GL_ATI_vertex_array_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLuint APIENTRY glNewObjectBufferATI (GLsizei size, const GLvoid *pointer, GLenum usage);
-GLAPI GLboolean APIENTRY glIsObjectBufferATI (GLuint buffer);
-GLAPI void APIENTRY glUpdateObjectBufferATI (GLuint buffer, GLuint offset, GLsizei size, const GLvoid *pointer, GLenum preserve);
-GLAPI void APIENTRY glGetObjectBufferfvATI (GLuint buffer, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetObjectBufferivATI (GLuint buffer, GLenum pname, GLint *params);
-GLAPI void APIENTRY glFreeObjectBufferATI (GLuint buffer);
-GLAPI void APIENTRY glArrayObjectATI (GLenum array, GLint size, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
-GLAPI void APIENTRY glGetArrayObjectfvATI (GLenum array, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetArrayObjectivATI (GLenum array, GLenum pname, GLint *params);
-GLAPI void APIENTRY glVariantArrayObjectATI (GLuint id, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
-GLAPI void APIENTRY glGetVariantArrayObjectfvATI (GLuint id, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetVariantArrayObjectivATI (GLuint id, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLuint (APIENTRYP PFNGLNEWOBJECTBUFFERATIPROC) (GLsizei size, const GLvoid *pointer, GLenum usage);
-typedef GLboolean (APIENTRYP PFNGLISOBJECTBUFFERATIPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLUPDATEOBJECTBUFFERATIPROC) (GLuint buffer, GLuint offset, GLsizei size, const GLvoid *pointer, GLenum preserve);
-typedef void (APIENTRYP PFNGLGETOBJECTBUFFERFVATIPROC) (GLuint buffer, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETOBJECTBUFFERIVATIPROC) (GLuint buffer, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLFREEOBJECTBUFFERATIPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLARRAYOBJECTATIPROC) (GLenum array, GLint size, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
-typedef void (APIENTRYP PFNGLGETARRAYOBJECTFVATIPROC) (GLenum array, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETARRAYOBJECTIVATIPROC) (GLenum array, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLVARIANTARRAYOBJECTATIPROC) (GLuint id, GLenum type, GLsizei stride, GLuint buffer, GLuint offset);
-typedef void (APIENTRYP PFNGLGETVARIANTARRAYOBJECTFVATIPROC) (GLuint id, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETVARIANTARRAYOBJECTIVATIPROC) (GLuint id, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_EXT_vertex_shader
-#define GL_EXT_vertex_shader 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBeginVertexShaderEXT (void);
-GLAPI void APIENTRY glEndVertexShaderEXT (void);
-GLAPI void APIENTRY glBindVertexShaderEXT (GLuint id);
-GLAPI GLuint APIENTRY glGenVertexShadersEXT (GLuint range);
-GLAPI void APIENTRY glDeleteVertexShaderEXT (GLuint id);
-GLAPI void APIENTRY glShaderOp1EXT (GLenum op, GLuint res, GLuint arg1);
-GLAPI void APIENTRY glShaderOp2EXT (GLenum op, GLuint res, GLuint arg1, GLuint arg2);
-GLAPI void APIENTRY glShaderOp3EXT (GLenum op, GLuint res, GLuint arg1, GLuint arg2, GLuint arg3);
-GLAPI void APIENTRY glSwizzleEXT (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
-GLAPI void APIENTRY glWriteMaskEXT (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
-GLAPI void APIENTRY glInsertComponentEXT (GLuint res, GLuint src, GLuint num);
-GLAPI void APIENTRY glExtractComponentEXT (GLuint res, GLuint src, GLuint num);
-GLAPI GLuint APIENTRY glGenSymbolsEXT (GLenum datatype, GLenum storagetype, GLenum range, GLuint components);
-GLAPI void APIENTRY glSetInvariantEXT (GLuint id, GLenum type, const GLvoid *addr);
-GLAPI void APIENTRY glSetLocalConstantEXT (GLuint id, GLenum type, const GLvoid *addr);
-GLAPI void APIENTRY glVariantbvEXT (GLuint id, const GLbyte *addr);
-GLAPI void APIENTRY glVariantsvEXT (GLuint id, const GLshort *addr);
-GLAPI void APIENTRY glVariantivEXT (GLuint id, const GLint *addr);
-GLAPI void APIENTRY glVariantfvEXT (GLuint id, const GLfloat *addr);
-GLAPI void APIENTRY glVariantdvEXT (GLuint id, const GLdouble *addr);
-GLAPI void APIENTRY glVariantubvEXT (GLuint id, const GLubyte *addr);
-GLAPI void APIENTRY glVariantusvEXT (GLuint id, const GLushort *addr);
-GLAPI void APIENTRY glVariantuivEXT (GLuint id, const GLuint *addr);
-GLAPI void APIENTRY glVariantPointerEXT (GLuint id, GLenum type, GLuint stride, const GLvoid *addr);
-GLAPI void APIENTRY glEnableVariantClientStateEXT (GLuint id);
-GLAPI void APIENTRY glDisableVariantClientStateEXT (GLuint id);
-GLAPI GLuint APIENTRY glBindLightParameterEXT (GLenum light, GLenum value);
-GLAPI GLuint APIENTRY glBindMaterialParameterEXT (GLenum face, GLenum value);
-GLAPI GLuint APIENTRY glBindTexGenParameterEXT (GLenum unit, GLenum coord, GLenum value);
-GLAPI GLuint APIENTRY glBindTextureUnitParameterEXT (GLenum unit, GLenum value);
-GLAPI GLuint APIENTRY glBindParameterEXT (GLenum value);
-GLAPI GLboolean APIENTRY glIsVariantEnabledEXT (GLuint id, GLenum cap);
-GLAPI void APIENTRY glGetVariantBooleanvEXT (GLuint id, GLenum value, GLboolean *data);
-GLAPI void APIENTRY glGetVariantIntegervEXT (GLuint id, GLenum value, GLint *data);
-GLAPI void APIENTRY glGetVariantFloatvEXT (GLuint id, GLenum value, GLfloat *data);
-GLAPI void APIENTRY glGetVariantPointervEXT (GLuint id, GLenum value, GLvoid* *data);
-GLAPI void APIENTRY glGetInvariantBooleanvEXT (GLuint id, GLenum value, GLboolean *data);
-GLAPI void APIENTRY glGetInvariantIntegervEXT (GLuint id, GLenum value, GLint *data);
-GLAPI void APIENTRY glGetInvariantFloatvEXT (GLuint id, GLenum value, GLfloat *data);
-GLAPI void APIENTRY glGetLocalConstantBooleanvEXT (GLuint id, GLenum value, GLboolean *data);
-GLAPI void APIENTRY glGetLocalConstantIntegervEXT (GLuint id, GLenum value, GLint *data);
-GLAPI void APIENTRY glGetLocalConstantFloatvEXT (GLuint id, GLenum value, GLfloat *data);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBEGINVERTEXSHADEREXTPROC) (void);
-typedef void (APIENTRYP PFNGLENDVERTEXSHADEREXTPROC) (void);
-typedef void (APIENTRYP PFNGLBINDVERTEXSHADEREXTPROC) (GLuint id);
-typedef GLuint (APIENTRYP PFNGLGENVERTEXSHADERSEXTPROC) (GLuint range);
-typedef void (APIENTRYP PFNGLDELETEVERTEXSHADEREXTPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLSHADEROP1EXTPROC) (GLenum op, GLuint res, GLuint arg1);
-typedef void (APIENTRYP PFNGLSHADEROP2EXTPROC) (GLenum op, GLuint res, GLuint arg1, GLuint arg2);
-typedef void (APIENTRYP PFNGLSHADEROP3EXTPROC) (GLenum op, GLuint res, GLuint arg1, GLuint arg2, GLuint arg3);
-typedef void (APIENTRYP PFNGLSWIZZLEEXTPROC) (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
-typedef void (APIENTRYP PFNGLWRITEMASKEXTPROC) (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW);
-typedef void (APIENTRYP PFNGLINSERTCOMPONENTEXTPROC) (GLuint res, GLuint src, GLuint num);
-typedef void (APIENTRYP PFNGLEXTRACTCOMPONENTEXTPROC) (GLuint res, GLuint src, GLuint num);
-typedef GLuint (APIENTRYP PFNGLGENSYMBOLSEXTPROC) (GLenum datatype, GLenum storagetype, GLenum range, GLuint components);
-typedef void (APIENTRYP PFNGLSETINVARIANTEXTPROC) (GLuint id, GLenum type, const GLvoid *addr);
-typedef void (APIENTRYP PFNGLSETLOCALCONSTANTEXTPROC) (GLuint id, GLenum type, const GLvoid *addr);
-typedef void (APIENTRYP PFNGLVARIANTBVEXTPROC) (GLuint id, const GLbyte *addr);
-typedef void (APIENTRYP PFNGLVARIANTSVEXTPROC) (GLuint id, const GLshort *addr);
-typedef void (APIENTRYP PFNGLVARIANTIVEXTPROC) (GLuint id, const GLint *addr);
-typedef void (APIENTRYP PFNGLVARIANTFVEXTPROC) (GLuint id, const GLfloat *addr);
-typedef void (APIENTRYP PFNGLVARIANTDVEXTPROC) (GLuint id, const GLdouble *addr);
-typedef void (APIENTRYP PFNGLVARIANTUBVEXTPROC) (GLuint id, const GLubyte *addr);
-typedef void (APIENTRYP PFNGLVARIANTUSVEXTPROC) (GLuint id, const GLushort *addr);
-typedef void (APIENTRYP PFNGLVARIANTUIVEXTPROC) (GLuint id, const GLuint *addr);
-typedef void (APIENTRYP PFNGLVARIANTPOINTEREXTPROC) (GLuint id, GLenum type, GLuint stride, const GLvoid *addr);
-typedef void (APIENTRYP PFNGLENABLEVARIANTCLIENTSTATEEXTPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLDISABLEVARIANTCLIENTSTATEEXTPROC) (GLuint id);
-typedef GLuint (APIENTRYP PFNGLBINDLIGHTPARAMETEREXTPROC) (GLenum light, GLenum value);
-typedef GLuint (APIENTRYP PFNGLBINDMATERIALPARAMETEREXTPROC) (GLenum face, GLenum value);
-typedef GLuint (APIENTRYP PFNGLBINDTEXGENPARAMETEREXTPROC) (GLenum unit, GLenum coord, GLenum value);
-typedef GLuint (APIENTRYP PFNGLBINDTEXTUREUNITPARAMETEREXTPROC) (GLenum unit, GLenum value);
-typedef GLuint (APIENTRYP PFNGLBINDPARAMETEREXTPROC) (GLenum value);
-typedef GLboolean (APIENTRYP PFNGLISVARIANTENABLEDEXTPROC) (GLuint id, GLenum cap);
-typedef void (APIENTRYP PFNGLGETVARIANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data);
-typedef void (APIENTRYP PFNGLGETVARIANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data);
-typedef void (APIENTRYP PFNGLGETVARIANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data);
-typedef void (APIENTRYP PFNGLGETVARIANTPOINTERVEXTPROC) (GLuint id, GLenum value, GLvoid* *data);
-typedef void (APIENTRYP PFNGLGETINVARIANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data);
-typedef void (APIENTRYP PFNGLGETINVARIANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data);
-typedef void (APIENTRYP PFNGLGETINVARIANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data);
-typedef void (APIENTRYP PFNGLGETLOCALCONSTANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data);
-typedef void (APIENTRYP PFNGLGETLOCALCONSTANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data);
-typedef void (APIENTRYP PFNGLGETLOCALCONSTANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data);
-#endif
-
-#ifndef GL_ATI_vertex_streams
-#define GL_ATI_vertex_streams 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexStream1sATI (GLenum stream, GLshort x);
-GLAPI void APIENTRY glVertexStream1svATI (GLenum stream, const GLshort *coords);
-GLAPI void APIENTRY glVertexStream1iATI (GLenum stream, GLint x);
-GLAPI void APIENTRY glVertexStream1ivATI (GLenum stream, const GLint *coords);
-GLAPI void APIENTRY glVertexStream1fATI (GLenum stream, GLfloat x);
-GLAPI void APIENTRY glVertexStream1fvATI (GLenum stream, const GLfloat *coords);
-GLAPI void APIENTRY glVertexStream1dATI (GLenum stream, GLdouble x);
-GLAPI void APIENTRY glVertexStream1dvATI (GLenum stream, const GLdouble *coords);
-GLAPI void APIENTRY glVertexStream2sATI (GLenum stream, GLshort x, GLshort y);
-GLAPI void APIENTRY glVertexStream2svATI (GLenum stream, const GLshort *coords);
-GLAPI void APIENTRY glVertexStream2iATI (GLenum stream, GLint x, GLint y);
-GLAPI void APIENTRY glVertexStream2ivATI (GLenum stream, const GLint *coords);
-GLAPI void APIENTRY glVertexStream2fATI (GLenum stream, GLfloat x, GLfloat y);
-GLAPI void APIENTRY glVertexStream2fvATI (GLenum stream, const GLfloat *coords);
-GLAPI void APIENTRY glVertexStream2dATI (GLenum stream, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glVertexStream2dvATI (GLenum stream, const GLdouble *coords);
-GLAPI void APIENTRY glVertexStream3sATI (GLenum stream, GLshort x, GLshort y, GLshort z);
-GLAPI void APIENTRY glVertexStream3svATI (GLenum stream, const GLshort *coords);
-GLAPI void APIENTRY glVertexStream3iATI (GLenum stream, GLint x, GLint y, GLint z);
-GLAPI void APIENTRY glVertexStream3ivATI (GLenum stream, const GLint *coords);
-GLAPI void APIENTRY glVertexStream3fATI (GLenum stream, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glVertexStream3fvATI (GLenum stream, const GLfloat *coords);
-GLAPI void APIENTRY glVertexStream3dATI (GLenum stream, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glVertexStream3dvATI (GLenum stream, const GLdouble *coords);
-GLAPI void APIENTRY glVertexStream4sATI (GLenum stream, GLshort x, GLshort y, GLshort z, GLshort w);
-GLAPI void APIENTRY glVertexStream4svATI (GLenum stream, const GLshort *coords);
-GLAPI void APIENTRY glVertexStream4iATI (GLenum stream, GLint x, GLint y, GLint z, GLint w);
-GLAPI void APIENTRY glVertexStream4ivATI (GLenum stream, const GLint *coords);
-GLAPI void APIENTRY glVertexStream4fATI (GLenum stream, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glVertexStream4fvATI (GLenum stream, const GLfloat *coords);
-GLAPI void APIENTRY glVertexStream4dATI (GLenum stream, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glVertexStream4dvATI (GLenum stream, const GLdouble *coords);
-GLAPI void APIENTRY glNormalStream3bATI (GLenum stream, GLbyte nx, GLbyte ny, GLbyte nz);
-GLAPI void APIENTRY glNormalStream3bvATI (GLenum stream, const GLbyte *coords);
-GLAPI void APIENTRY glNormalStream3sATI (GLenum stream, GLshort nx, GLshort ny, GLshort nz);
-GLAPI void APIENTRY glNormalStream3svATI (GLenum stream, const GLshort *coords);
-GLAPI void APIENTRY glNormalStream3iATI (GLenum stream, GLint nx, GLint ny, GLint nz);
-GLAPI void APIENTRY glNormalStream3ivATI (GLenum stream, const GLint *coords);
-GLAPI void APIENTRY glNormalStream3fATI (GLenum stream, GLfloat nx, GLfloat ny, GLfloat nz);
-GLAPI void APIENTRY glNormalStream3fvATI (GLenum stream, const GLfloat *coords);
-GLAPI void APIENTRY glNormalStream3dATI (GLenum stream, GLdouble nx, GLdouble ny, GLdouble nz);
-GLAPI void APIENTRY glNormalStream3dvATI (GLenum stream, const GLdouble *coords);
-GLAPI void APIENTRY glClientActiveVertexStreamATI (GLenum stream);
-GLAPI void APIENTRY glVertexBlendEnviATI (GLenum pname, GLint param);
-GLAPI void APIENTRY glVertexBlendEnvfATI (GLenum pname, GLfloat param);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1SATIPROC) (GLenum stream, GLshort x);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1SVATIPROC) (GLenum stream, const GLshort *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1IATIPROC) (GLenum stream, GLint x);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1IVATIPROC) (GLenum stream, const GLint *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1FATIPROC) (GLenum stream, GLfloat x);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1FVATIPROC) (GLenum stream, const GLfloat *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1DATIPROC) (GLenum stream, GLdouble x);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM1DVATIPROC) (GLenum stream, const GLdouble *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2SATIPROC) (GLenum stream, GLshort x, GLshort y);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2SVATIPROC) (GLenum stream, const GLshort *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2IATIPROC) (GLenum stream, GLint x, GLint y);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2IVATIPROC) (GLenum stream, const GLint *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2FATIPROC) (GLenum stream, GLfloat x, GLfloat y);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2FVATIPROC) (GLenum stream, const GLfloat *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2DATIPROC) (GLenum stream, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM2DVATIPROC) (GLenum stream, const GLdouble *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3SATIPROC) (GLenum stream, GLshort x, GLshort y, GLshort z);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3SVATIPROC) (GLenum stream, const GLshort *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3IATIPROC) (GLenum stream, GLint x, GLint y, GLint z);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3IVATIPROC) (GLenum stream, const GLint *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3FATIPROC) (GLenum stream, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3FVATIPROC) (GLenum stream, const GLfloat *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3DATIPROC) (GLenum stream, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM3DVATIPROC) (GLenum stream, const GLdouble *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4SATIPROC) (GLenum stream, GLshort x, GLshort y, GLshort z, GLshort w);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4SVATIPROC) (GLenum stream, const GLshort *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4IATIPROC) (GLenum stream, GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4IVATIPROC) (GLenum stream, const GLint *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4FATIPROC) (GLenum stream, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4FVATIPROC) (GLenum stream, const GLfloat *coords);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4DATIPROC) (GLenum stream, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLVERTEXSTREAM4DVATIPROC) (GLenum stream, const GLdouble *coords);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3BATIPROC) (GLenum stream, GLbyte nx, GLbyte ny, GLbyte nz);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3BVATIPROC) (GLenum stream, const GLbyte *coords);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3SATIPROC) (GLenum stream, GLshort nx, GLshort ny, GLshort nz);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3SVATIPROC) (GLenum stream, const GLshort *coords);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3IATIPROC) (GLenum stream, GLint nx, GLint ny, GLint nz);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3IVATIPROC) (GLenum stream, const GLint *coords);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3FATIPROC) (GLenum stream, GLfloat nx, GLfloat ny, GLfloat nz);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3FVATIPROC) (GLenum stream, const GLfloat *coords);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3DATIPROC) (GLenum stream, GLdouble nx, GLdouble ny, GLdouble nz);
-typedef void (APIENTRYP PFNGLNORMALSTREAM3DVATIPROC) (GLenum stream, const GLdouble *coords);
-typedef void (APIENTRYP PFNGLCLIENTACTIVEVERTEXSTREAMATIPROC) (GLenum stream);
-typedef void (APIENTRYP PFNGLVERTEXBLENDENVIATIPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLVERTEXBLENDENVFATIPROC) (GLenum pname, GLfloat param);
-#endif
-
-#ifndef GL_ATI_element_array
-#define GL_ATI_element_array 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glElementPointerATI (GLenum type, const GLvoid *pointer);
-GLAPI void APIENTRY glDrawElementArrayATI (GLenum mode, GLsizei count);
-GLAPI void APIENTRY glDrawRangeElementArrayATI (GLenum mode, GLuint start, GLuint end, GLsizei count);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLELEMENTPOINTERATIPROC) (GLenum type, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLDRAWELEMENTARRAYATIPROC) (GLenum mode, GLsizei count);
-typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTARRAYATIPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count);
-#endif
-
-#ifndef GL_SUN_mesh_array
-#define GL_SUN_mesh_array 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawMeshArraysSUN (GLenum mode, GLint first, GLsizei count, GLsizei width);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWMESHARRAYSSUNPROC) (GLenum mode, GLint first, GLsizei count, GLsizei width);
-#endif
-
-#ifndef GL_SUN_slice_accum
-#define GL_SUN_slice_accum 1
-#endif
-
-#ifndef GL_NV_multisample_filter_hint
-#define GL_NV_multisample_filter_hint 1
-#endif
-
-#ifndef GL_NV_depth_clamp
-#define GL_NV_depth_clamp 1
-#endif
-
-#ifndef GL_NV_occlusion_query
-#define GL_NV_occlusion_query 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGenOcclusionQueriesNV (GLsizei n, GLuint *ids);
-GLAPI void APIENTRY glDeleteOcclusionQueriesNV (GLsizei n, const GLuint *ids);
-GLAPI GLboolean APIENTRY glIsOcclusionQueryNV (GLuint id);
-GLAPI void APIENTRY glBeginOcclusionQueryNV (GLuint id);
-GLAPI void APIENTRY glEndOcclusionQueryNV (void);
-GLAPI void APIENTRY glGetOcclusionQueryivNV (GLuint id, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetOcclusionQueryuivNV (GLuint id, GLenum pname, GLuint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGENOCCLUSIONQUERIESNVPROC) (GLsizei n, GLuint *ids);
-typedef void (APIENTRYP PFNGLDELETEOCCLUSIONQUERIESNVPROC) (GLsizei n, const GLuint *ids);
-typedef GLboolean (APIENTRYP PFNGLISOCCLUSIONQUERYNVPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLBEGINOCCLUSIONQUERYNVPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLENDOCCLUSIONQUERYNVPROC) (void);
-typedef void (APIENTRYP PFNGLGETOCCLUSIONQUERYIVNVPROC) (GLuint id, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETOCCLUSIONQUERYUIVNVPROC) (GLuint id, GLenum pname, GLuint *params);
-#endif
-
-#ifndef GL_NV_point_sprite
-#define GL_NV_point_sprite 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPointParameteriNV (GLenum pname, GLint param);
-GLAPI void APIENTRY glPointParameterivNV (GLenum pname, const GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPOINTPARAMETERINVPROC) (GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERIVNVPROC) (GLenum pname, const GLint *params);
-#endif
-
-#ifndef GL_NV_texture_shader3
-#define GL_NV_texture_shader3 1
+GLAPI GLboolean APIENTRY glAreProgramsResidentNV (GLsizei n, const GLuint *programs, GLboolean *residences);
+GLAPI void APIENTRY glBindProgramNV (GLenum target, GLuint id);
+GLAPI void APIENTRY glDeleteProgramsNV (GLsizei n, const GLuint *programs);
+GLAPI void APIENTRY glExecuteProgramNV (GLenum target, GLuint id, const GLfloat *params);
+GLAPI void APIENTRY glGenProgramsNV (GLsizei n, GLuint *programs);
+GLAPI void APIENTRY glGetProgramParameterdvNV (GLenum target, GLuint index, GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glGetProgramParameterfvNV (GLenum target, GLuint index, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetProgramivNV (GLuint id, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetProgramStringNV (GLuint id, GLenum pname, GLubyte *program);
+GLAPI void APIENTRY glGetTrackMatrixivNV (GLenum target, GLuint address, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVertexAttribdvNV (GLuint index, GLenum pname, GLdouble *params);
+GLAPI void APIENTRY glGetVertexAttribfvNV (GLuint index, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetVertexAttribivNV (GLuint index, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVertexAttribPointervNV (GLuint index, GLenum pname, void **pointer);
+GLAPI GLboolean APIENTRY glIsProgramNV (GLuint id);
+GLAPI void APIENTRY glLoadProgramNV (GLenum target, GLuint id, GLsizei len, const GLubyte *program);
+GLAPI void APIENTRY glProgramParameter4dNV (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glProgramParameter4dvNV (GLenum target, GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glProgramParameter4fNV (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glProgramParameter4fvNV (GLenum target, GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glProgramParameters4dvNV (GLenum target, GLuint index, GLsizei count, const GLdouble *v);
+GLAPI void APIENTRY glProgramParameters4fvNV (GLenum target, GLuint index, GLsizei count, const GLfloat *v);
+GLAPI void APIENTRY glRequestResidentProgramsNV (GLsizei n, const GLuint *programs);
+GLAPI void APIENTRY glTrackMatrixNV (GLenum target, GLuint address, GLenum matrix, GLenum transform);
+GLAPI void APIENTRY glVertexAttribPointerNV (GLuint index, GLint fsize, GLenum type, GLsizei stride, const void *pointer);
+GLAPI void APIENTRY glVertexAttrib1dNV (GLuint index, GLdouble x);
+GLAPI void APIENTRY glVertexAttrib1dvNV (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib1fNV (GLuint index, GLfloat x);
+GLAPI void APIENTRY glVertexAttrib1fvNV (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib1sNV (GLuint index, GLshort x);
+GLAPI void APIENTRY glVertexAttrib1svNV (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib2dNV (GLuint index, GLdouble x, GLdouble y);
+GLAPI void APIENTRY glVertexAttrib2dvNV (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib2fNV (GLuint index, GLfloat x, GLfloat y);
+GLAPI void APIENTRY glVertexAttrib2fvNV (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib2sNV (GLuint index, GLshort x, GLshort y);
+GLAPI void APIENTRY glVertexAttrib2svNV (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib3dNV (GLuint index, GLdouble x, GLdouble y, GLdouble z);
+GLAPI void APIENTRY glVertexAttrib3dvNV (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib3fNV (GLuint index, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glVertexAttrib3fvNV (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib3sNV (GLuint index, GLshort x, GLshort y, GLshort z);
+GLAPI void APIENTRY glVertexAttrib3svNV (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4dNV (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
+GLAPI void APIENTRY glVertexAttrib4dvNV (GLuint index, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttrib4fNV (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glVertexAttrib4fvNV (GLuint index, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttrib4sNV (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w);
+GLAPI void APIENTRY glVertexAttrib4svNV (GLuint index, const GLshort *v);
+GLAPI void APIENTRY glVertexAttrib4ubNV (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w);
+GLAPI void APIENTRY glVertexAttrib4ubvNV (GLuint index, const GLubyte *v);
+GLAPI void APIENTRY glVertexAttribs1dvNV (GLuint index, GLsizei count, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribs1fvNV (GLuint index, GLsizei count, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttribs1svNV (GLuint index, GLsizei count, const GLshort *v);
+GLAPI void APIENTRY glVertexAttribs2dvNV (GLuint index, GLsizei count, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribs2fvNV (GLuint index, GLsizei count, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttribs2svNV (GLuint index, GLsizei count, const GLshort *v);
+GLAPI void APIENTRY glVertexAttribs3dvNV (GLuint index, GLsizei count, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribs3fvNV (GLuint index, GLsizei count, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttribs3svNV (GLuint index, GLsizei count, const GLshort *v);
+GLAPI void APIENTRY glVertexAttribs4dvNV (GLuint index, GLsizei count, const GLdouble *v);
+GLAPI void APIENTRY glVertexAttribs4fvNV (GLuint index, GLsizei count, const GLfloat *v);
+GLAPI void APIENTRY glVertexAttribs4svNV (GLuint index, GLsizei count, const GLshort *v);
+GLAPI void APIENTRY glVertexAttribs4ubvNV (GLuint index, GLsizei count, const GLubyte *v);
 #endif
+#endif /* GL_NV_vertex_program */
 
 #ifndef GL_NV_vertex_program1_1
 #define GL_NV_vertex_program1_1 1
-#endif
-
-#ifndef GL_EXT_shadow_funcs
-#define GL_EXT_shadow_funcs 1
-#endif
-
-#ifndef GL_EXT_stencil_two_side
-#define GL_EXT_stencil_two_side 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glActiveStencilFaceEXT (GLenum face);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLACTIVESTENCILFACEEXTPROC) (GLenum face);
-#endif
-
-#ifndef GL_ATI_text_fragment_shader
-#define GL_ATI_text_fragment_shader 1
-#endif
-
-#ifndef GL_APPLE_client_storage
-#define GL_APPLE_client_storage 1
-#endif
-
-#ifndef GL_APPLE_element_array
-#define GL_APPLE_element_array 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glElementPointerAPPLE (GLenum type, const GLvoid *pointer);
-GLAPI void APIENTRY glDrawElementArrayAPPLE (GLenum mode, GLint first, GLsizei count);
-GLAPI void APIENTRY glDrawRangeElementArrayAPPLE (GLenum mode, GLuint start, GLuint end, GLint first, GLsizei count);
-GLAPI void APIENTRY glMultiDrawElementArrayAPPLE (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
-GLAPI void APIENTRY glMultiDrawRangeElementArrayAPPLE (GLenum mode, GLuint start, GLuint end, const GLint *first, const GLsizei *count, GLsizei primcount);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLELEMENTPOINTERAPPLEPROC) (GLenum type, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLDRAWELEMENTARRAYAPPLEPROC) (GLenum mode, GLint first, GLsizei count);
-typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTARRAYAPPLEPROC) (GLenum mode, GLuint start, GLuint end, GLint first, GLsizei count);
-typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTARRAYAPPLEPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount);
-typedef void (APIENTRYP PFNGLMULTIDRAWRANGEELEMENTARRAYAPPLEPROC) (GLenum mode, GLuint start, GLuint end, const GLint *first, const GLsizei *count, GLsizei primcount);
-#endif
-
-#ifndef GL_APPLE_fence
-#define GL_APPLE_fence 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGenFencesAPPLE (GLsizei n, GLuint *fences);
-GLAPI void APIENTRY glDeleteFencesAPPLE (GLsizei n, const GLuint *fences);
-GLAPI void APIENTRY glSetFenceAPPLE (GLuint fence);
-GLAPI GLboolean APIENTRY glIsFenceAPPLE (GLuint fence);
-GLAPI GLboolean APIENTRY glTestFenceAPPLE (GLuint fence);
-GLAPI void APIENTRY glFinishFenceAPPLE (GLuint fence);
-GLAPI GLboolean APIENTRY glTestObjectAPPLE (GLenum object, GLuint name);
-GLAPI void APIENTRY glFinishObjectAPPLE (GLenum object, GLint name);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGENFENCESAPPLEPROC) (GLsizei n, GLuint *fences);
-typedef void (APIENTRYP PFNGLDELETEFENCESAPPLEPROC) (GLsizei n, const GLuint *fences);
-typedef void (APIENTRYP PFNGLSETFENCEAPPLEPROC) (GLuint fence);
-typedef GLboolean (APIENTRYP PFNGLISFENCEAPPLEPROC) (GLuint fence);
-typedef GLboolean (APIENTRYP PFNGLTESTFENCEAPPLEPROC) (GLuint fence);
-typedef void (APIENTRYP PFNGLFINISHFENCEAPPLEPROC) (GLuint fence);
-typedef GLboolean (APIENTRYP PFNGLTESTOBJECTAPPLEPROC) (GLenum object, GLuint name);
-typedef void (APIENTRYP PFNGLFINISHOBJECTAPPLEPROC) (GLenum object, GLint name);
-#endif
-
-#ifndef GL_APPLE_vertex_array_object
-#define GL_APPLE_vertex_array_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindVertexArrayAPPLE (GLuint array);
-GLAPI void APIENTRY glDeleteVertexArraysAPPLE (GLsizei n, const GLuint *arrays);
-GLAPI void APIENTRY glGenVertexArraysAPPLE (GLsizei n, GLuint *arrays);
-GLAPI GLboolean APIENTRY glIsVertexArrayAPPLE (GLuint array);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDVERTEXARRAYAPPLEPROC) (GLuint array);
-typedef void (APIENTRYP PFNGLDELETEVERTEXARRAYSAPPLEPROC) (GLsizei n, const GLuint *arrays);
-typedef void (APIENTRYP PFNGLGENVERTEXARRAYSAPPLEPROC) (GLsizei n, GLuint *arrays);
-typedef GLboolean (APIENTRYP PFNGLISVERTEXARRAYAPPLEPROC) (GLuint array);
-#endif
-
-#ifndef GL_APPLE_vertex_array_range
-#define GL_APPLE_vertex_array_range 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexArrayRangeAPPLE (GLsizei length, GLvoid *pointer);
-GLAPI void APIENTRY glFlushVertexArrayRangeAPPLE (GLsizei length, GLvoid *pointer);
-GLAPI void APIENTRY glVertexArrayParameteriAPPLE (GLenum pname, GLint param);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXARRAYRANGEAPPLEPROC) (GLsizei length, GLvoid *pointer);
-typedef void (APIENTRYP PFNGLFLUSHVERTEXARRAYRANGEAPPLEPROC) (GLsizei length, GLvoid *pointer);
-typedef void (APIENTRYP PFNGLVERTEXARRAYPARAMETERIAPPLEPROC) (GLenum pname, GLint param);
-#endif
-
-#ifndef GL_APPLE_ycbcr_422
-#define GL_APPLE_ycbcr_422 1
-#endif
-
-#ifndef GL_S3_s3tc
-#define GL_S3_s3tc 1
-#endif
-
-#ifndef GL_ATI_draw_buffers
-#define GL_ATI_draw_buffers 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawBuffersATI (GLsizei n, const GLenum *bufs);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWBUFFERSATIPROC) (GLsizei n, const GLenum *bufs);
-#endif
-
-#ifndef GL_ATI_pixel_format_float
-#define GL_ATI_pixel_format_float 1
-/* This is really a WGL extension, but defines some associated GL enums.
- * ATI does not export "GL_ATI_pixel_format_float" in the GL_EXTENSIONS string.
- */
-#endif
-
-#ifndef GL_ATI_texture_env_combine3
-#define GL_ATI_texture_env_combine3 1
-#endif
-
-#ifndef GL_ATI_texture_float
-#define GL_ATI_texture_float 1
-#endif
-
-#ifndef GL_NV_float_buffer
-#define GL_NV_float_buffer 1
-#endif
-
-#ifndef GL_NV_fragment_program
-#define GL_NV_fragment_program 1
-/* Some NV_fragment_program entry points are shared with ARB_vertex_program. */
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramNamedParameter4fNV (GLuint id, GLsizei len, const GLubyte *name, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glProgramNamedParameter4fvNV (GLuint id, GLsizei len, const GLubyte *name, const GLfloat *v);
-GLAPI void APIENTRY glProgramNamedParameter4dNV (GLuint id, GLsizei len, const GLubyte *name, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glProgramNamedParameter4dvNV (GLuint id, GLsizei len, const GLubyte *name, const GLdouble *v);
-GLAPI void APIENTRY glGetProgramNamedParameterfvNV (GLuint id, GLsizei len, const GLubyte *name, GLfloat *params);
-GLAPI void APIENTRY glGetProgramNamedParameterdvNV (GLuint id, GLsizei len, const GLubyte *name, GLdouble *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4FNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4FVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, const GLfloat *v);
-typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4DNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4DVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, const GLdouble *v);
-typedef void (APIENTRYP PFNGLGETPROGRAMNAMEDPARAMETERFVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMNAMEDPARAMETERDVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLdouble *params);
-#endif
-
-#ifndef GL_NV_half_float
-#define GL_NV_half_float 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertex2hNV (GLhalfNV x, GLhalfNV y);
-GLAPI void APIENTRY glVertex2hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glVertex3hNV (GLhalfNV x, GLhalfNV y, GLhalfNV z);
-GLAPI void APIENTRY glVertex3hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glVertex4hNV (GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
-GLAPI void APIENTRY glVertex4hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glNormal3hNV (GLhalfNV nx, GLhalfNV ny, GLhalfNV nz);
-GLAPI void APIENTRY glNormal3hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
-GLAPI void APIENTRY glColor3hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glColor4hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue, GLhalfNV alpha);
-GLAPI void APIENTRY glColor4hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glTexCoord1hNV (GLhalfNV s);
-GLAPI void APIENTRY glTexCoord1hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glTexCoord2hNV (GLhalfNV s, GLhalfNV t);
-GLAPI void APIENTRY glTexCoord2hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glTexCoord3hNV (GLhalfNV s, GLhalfNV t, GLhalfNV r);
-GLAPI void APIENTRY glTexCoord3hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glTexCoord4hNV (GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
-GLAPI void APIENTRY glTexCoord4hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glMultiTexCoord1hNV (GLenum target, GLhalfNV s);
-GLAPI void APIENTRY glMultiTexCoord1hvNV (GLenum target, const GLhalfNV *v);
-GLAPI void APIENTRY glMultiTexCoord2hNV (GLenum target, GLhalfNV s, GLhalfNV t);
-GLAPI void APIENTRY glMultiTexCoord2hvNV (GLenum target, const GLhalfNV *v);
-GLAPI void APIENTRY glMultiTexCoord3hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r);
-GLAPI void APIENTRY glMultiTexCoord3hvNV (GLenum target, const GLhalfNV *v);
-GLAPI void APIENTRY glMultiTexCoord4hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
-GLAPI void APIENTRY glMultiTexCoord4hvNV (GLenum target, const GLhalfNV *v);
-GLAPI void APIENTRY glFogCoordhNV (GLhalfNV fog);
-GLAPI void APIENTRY glFogCoordhvNV (const GLhalfNV *fog);
-GLAPI void APIENTRY glSecondaryColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
-GLAPI void APIENTRY glSecondaryColor3hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glVertexWeighthNV (GLhalfNV weight);
-GLAPI void APIENTRY glVertexWeighthvNV (const GLhalfNV *weight);
-GLAPI void APIENTRY glVertexAttrib1hNV (GLuint index, GLhalfNV x);
-GLAPI void APIENTRY glVertexAttrib1hvNV (GLuint index, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttrib2hNV (GLuint index, GLhalfNV x, GLhalfNV y);
-GLAPI void APIENTRY glVertexAttrib2hvNV (GLuint index, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttrib3hNV (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z);
-GLAPI void APIENTRY glVertexAttrib3hvNV (GLuint index, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttrib4hNV (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
-GLAPI void APIENTRY glVertexAttrib4hvNV (GLuint index, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttribs1hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttribs2hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttribs3hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
-GLAPI void APIENTRY glVertexAttribs4hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEX2HNVPROC) (GLhalfNV x, GLhalfNV y);
-typedef void (APIENTRYP PFNGLVERTEX2HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEX3HNVPROC) (GLhalfNV x, GLhalfNV y, GLhalfNV z);
-typedef void (APIENTRYP PFNGLVERTEX3HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEX4HNVPROC) (GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
-typedef void (APIENTRYP PFNGLVERTEX4HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLNORMAL3HNVPROC) (GLhalfNV nx, GLhalfNV ny, GLhalfNV nz);
-typedef void (APIENTRYP PFNGLNORMAL3HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
-typedef void (APIENTRYP PFNGLCOLOR3HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLCOLOR4HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue, GLhalfNV alpha);
-typedef void (APIENTRYP PFNGLCOLOR4HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLTEXCOORD1HNVPROC) (GLhalfNV s);
-typedef void (APIENTRYP PFNGLTEXCOORD1HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLTEXCOORD2HNVPROC) (GLhalfNV s, GLhalfNV t);
-typedef void (APIENTRYP PFNGLTEXCOORD2HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLTEXCOORD3HNVPROC) (GLhalfNV s, GLhalfNV t, GLhalfNV r);
-typedef void (APIENTRYP PFNGLTEXCOORD3HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLTEXCOORD4HNVPROC) (GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
-typedef void (APIENTRYP PFNGLTEXCOORD4HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1HNVPROC) (GLenum target, GLhalfNV s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1HVNVPROC) (GLenum target, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2HVNVPROC) (GLenum target, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3HVNVPROC) (GLenum target, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4HVNVPROC) (GLenum target, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLFOGCOORDHNVPROC) (GLhalfNV fog);
-typedef void (APIENTRYP PFNGLFOGCOORDHVNVPROC) (const GLhalfNV *fog);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTHNVPROC) (GLhalfNV weight);
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTHVNVPROC) (const GLhalfNV *weight);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1HNVPROC) (GLuint index, GLhalfNV x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB1HVNVPROC) (GLuint index, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB2HVNVPROC) (GLuint index, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB3HVNVPROC) (GLuint index, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIB4HVNVPROC) (GLuint index, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBS1HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBS2HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBS3HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBS4HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
-#endif
-
-#ifndef GL_NV_pixel_data_range
-#define GL_NV_pixel_data_range 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPixelDataRangeNV (GLenum target, GLsizei length, const GLvoid *pointer);
-GLAPI void APIENTRY glFlushPixelDataRangeNV (GLenum target);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPIXELDATARANGENVPROC) (GLenum target, GLsizei length, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLFLUSHPIXELDATARANGENVPROC) (GLenum target);
-#endif
-
-#ifndef GL_NV_primitive_restart
-#define GL_NV_primitive_restart 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPrimitiveRestartNV (void);
-GLAPI void APIENTRY glPrimitiveRestartIndexNV (GLuint index);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPRIMITIVERESTARTNVPROC) (void);
-typedef void (APIENTRYP PFNGLPRIMITIVERESTARTINDEXNVPROC) (GLuint index);
-#endif
-
-#ifndef GL_NV_texture_expand_normal
-#define GL_NV_texture_expand_normal 1
-#endif
+#endif /* GL_NV_vertex_program1_1 */
 
 #ifndef GL_NV_vertex_program2
 #define GL_NV_vertex_program2 1
-#endif
-
-#ifndef GL_ATI_map_object_buffer
-#define GL_ATI_map_object_buffer 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLvoid* APIENTRY glMapObjectBufferATI (GLuint buffer);
-GLAPI void APIENTRY glUnmapObjectBufferATI (GLuint buffer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLvoid* (APIENTRYP PFNGLMAPOBJECTBUFFERATIPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLUNMAPOBJECTBUFFERATIPROC) (GLuint buffer);
-#endif
-
-#ifndef GL_ATI_separate_stencil
-#define GL_ATI_separate_stencil 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glStencilOpSeparateATI (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
-GLAPI void APIENTRY glStencilFuncSeparateATI (GLenum frontfunc, GLenum backfunc, GLint ref, GLuint mask);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSTENCILOPSEPARATEATIPROC) (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
-typedef void (APIENTRYP PFNGLSTENCILFUNCSEPARATEATIPROC) (GLenum frontfunc, GLenum backfunc, GLint ref, GLuint mask);
-#endif
-
-#ifndef GL_ATI_vertex_attrib_array_object
-#define GL_ATI_vertex_attrib_array_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttribArrayObjectATI (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLuint buffer, GLuint offset);
-GLAPI void APIENTRY glGetVertexAttribArrayObjectfvATI (GLuint index, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetVertexAttribArrayObjectivATI (GLuint index, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBARRAYOBJECTATIPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLuint buffer, GLuint offset);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBARRAYOBJECTFVATIPROC) (GLuint index, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBARRAYOBJECTIVATIPROC) (GLuint index, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_OES_byte_coordinates
-#define GL_OES_byte_coordinates 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMultiTexCoord1bOES (GLenum texture, GLbyte s);
-GLAPI void APIENTRY glMultiTexCoord1bvOES (GLenum texture, const GLbyte *coords);
-GLAPI void APIENTRY glMultiTexCoord2bOES (GLenum texture, GLbyte s, GLbyte t);
-GLAPI void APIENTRY glMultiTexCoord2bvOES (GLenum texture, const GLbyte *coords);
-GLAPI void APIENTRY glMultiTexCoord3bOES (GLenum texture, GLbyte s, GLbyte t, GLbyte r);
-GLAPI void APIENTRY glMultiTexCoord3bvOES (GLenum texture, const GLbyte *coords);
-GLAPI void APIENTRY glMultiTexCoord4bOES (GLenum texture, GLbyte s, GLbyte t, GLbyte r, GLbyte q);
-GLAPI void APIENTRY glMultiTexCoord4bvOES (GLenum texture, const GLbyte *coords);
-GLAPI void APIENTRY glTexCoord1bOES (GLbyte s);
-GLAPI void APIENTRY glTexCoord1bvOES (const GLbyte *coords);
-GLAPI void APIENTRY glTexCoord2bOES (GLbyte s, GLbyte t);
-GLAPI void APIENTRY glTexCoord2bvOES (const GLbyte *coords);
-GLAPI void APIENTRY glTexCoord3bOES (GLbyte s, GLbyte t, GLbyte r);
-GLAPI void APIENTRY glTexCoord3bvOES (const GLbyte *coords);
-GLAPI void APIENTRY glTexCoord4bOES (GLbyte s, GLbyte t, GLbyte r, GLbyte q);
-GLAPI void APIENTRY glTexCoord4bvOES (const GLbyte *coords);
-GLAPI void APIENTRY glVertex2bOES (GLbyte x);
-GLAPI void APIENTRY glVertex2bvOES (const GLbyte *coords);
-GLAPI void APIENTRY glVertex3bOES (GLbyte x, GLbyte y);
-GLAPI void APIENTRY glVertex3bvOES (const GLbyte *coords);
-GLAPI void APIENTRY glVertex4bOES (GLbyte x, GLbyte y, GLbyte z);
-GLAPI void APIENTRY glVertex4bvOES (const GLbyte *coords);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1BOESPROC) (GLenum texture, GLbyte s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1BVOESPROC) (GLenum texture, const GLbyte *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2BOESPROC) (GLenum texture, GLbyte s, GLbyte t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2BVOESPROC) (GLenum texture, const GLbyte *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3BOESPROC) (GLenum texture, GLbyte s, GLbyte t, GLbyte r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3BVOESPROC) (GLenum texture, const GLbyte *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4BOESPROC) (GLenum texture, GLbyte s, GLbyte t, GLbyte r, GLbyte q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4BVOESPROC) (GLenum texture, const GLbyte *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD1BOESPROC) (GLbyte s);
-typedef void (APIENTRYP PFNGLTEXCOORD1BVOESPROC) (const GLbyte *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD2BOESPROC) (GLbyte s, GLbyte t);
-typedef void (APIENTRYP PFNGLTEXCOORD2BVOESPROC) (const GLbyte *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD3BOESPROC) (GLbyte s, GLbyte t, GLbyte r);
-typedef void (APIENTRYP PFNGLTEXCOORD3BVOESPROC) (const GLbyte *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD4BOESPROC) (GLbyte s, GLbyte t, GLbyte r, GLbyte q);
-typedef void (APIENTRYP PFNGLTEXCOORD4BVOESPROC) (const GLbyte *coords);
-typedef void (APIENTRYP PFNGLVERTEX2BOESPROC) (GLbyte x);
-typedef void (APIENTRYP PFNGLVERTEX2BVOESPROC) (const GLbyte *coords);
-typedef void (APIENTRYP PFNGLVERTEX3BOESPROC) (GLbyte x, GLbyte y);
-typedef void (APIENTRYP PFNGLVERTEX3BVOESPROC) (const GLbyte *coords);
-typedef void (APIENTRYP PFNGLVERTEX4BOESPROC) (GLbyte x, GLbyte y, GLbyte z);
-typedef void (APIENTRYP PFNGLVERTEX4BVOESPROC) (const GLbyte *coords);
-#endif
-
-#ifndef GL_OES_fixed_point
-#define GL_OES_fixed_point 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glAccumxOES (GLenum op, GLfixed value);
-GLAPI void APIENTRY glAlphaFuncxOES (GLenum func, GLfixed ref);
-GLAPI void APIENTRY glBitmapxOES (GLsizei width, GLsizei height, GLfixed xorig, GLfixed yorig, GLfixed xmove, GLfixed ymove, const GLubyte *bitmap);
-GLAPI void APIENTRY glBlendColorxOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-GLAPI void APIENTRY glClearAccumxOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-GLAPI void APIENTRY glClearColorxOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-GLAPI void APIENTRY glClearDepthxOES (GLfixed depth);
-GLAPI void APIENTRY glClipPlanexOES (GLenum plane, const GLfixed *equation);
-GLAPI void APIENTRY glColor3xOES (GLfixed red, GLfixed green, GLfixed blue);
-GLAPI void APIENTRY glColor4xOES (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-GLAPI void APIENTRY glColor3xvOES (const GLfixed *components);
-GLAPI void APIENTRY glColor4xvOES (const GLfixed *components);
-GLAPI void APIENTRY glConvolutionParameterxOES (GLenum target, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glConvolutionParameterxvOES (GLenum target, GLenum pname, const GLfixed *params);
-GLAPI void APIENTRY glDepthRangexOES (GLfixed n, GLfixed f);
-GLAPI void APIENTRY glEvalCoord1xOES (GLfixed u);
-GLAPI void APIENTRY glEvalCoord2xOES (GLfixed u, GLfixed v);
-GLAPI void APIENTRY glEvalCoord1xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glEvalCoord2xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glFeedbackBufferxOES (GLsizei n, GLenum type, const GLfixed *buffer);
-GLAPI void APIENTRY glFogxOES (GLenum pname, GLfixed param);
-GLAPI void APIENTRY glFogxvOES (GLenum pname, const GLfixed *param);
-GLAPI void APIENTRY glFrustumxOES (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
-GLAPI void APIENTRY glGetClipPlanexOES (GLenum plane, GLfixed *equation);
-GLAPI void APIENTRY glGetConvolutionParameterxvOES (GLenum target, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetFixedvOES (GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetHistogramParameterxvOES (GLenum target, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetLightxOES (GLenum light, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetMapxvOES (GLenum target, GLenum query, GLfixed *v);
-GLAPI void APIENTRY glGetMaterialxOES (GLenum face, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glGetPixelMapxv (GLenum map, GLint size, GLfixed *values);
-GLAPI void APIENTRY glGetTexEnvxvOES (GLenum target, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetTexGenxvOES (GLenum coord, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetTexLevelParameterxvOES (GLenum target, GLint level, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glGetTexParameterxvOES (GLenum target, GLenum pname, GLfixed *params);
-GLAPI void APIENTRY glIndexxOES (GLfixed component);
-GLAPI void APIENTRY glIndexxvOES (const GLfixed *component);
-GLAPI void APIENTRY glLightModelxOES (GLenum pname, GLfixed param);
-GLAPI void APIENTRY glLightModelxvOES (GLenum pname, const GLfixed *param);
-GLAPI void APIENTRY glLightxOES (GLenum light, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glLightxvOES (GLenum light, GLenum pname, const GLfixed *params);
-GLAPI void APIENTRY glLineWidthxOES (GLfixed width);
-GLAPI void APIENTRY glLoadMatrixxOES (const GLfixed *m);
-GLAPI void APIENTRY glLoadTransposeMatrixxOES (const GLfixed *m);
-GLAPI void APIENTRY glMap1xOES (GLenum target, GLfixed u1, GLfixed u2, GLint stride, GLint order, GLfixed points);
-GLAPI void APIENTRY glMap2xOES (GLenum target, GLfixed u1, GLfixed u2, GLint ustride, GLint uorder, GLfixed v1, GLfixed v2, GLint vstride, GLint vorder, GLfixed points);
-GLAPI void APIENTRY glMapGrid1xOES (GLint n, GLfixed u1, GLfixed u2);
-GLAPI void APIENTRY glMapGrid2xOES (GLint n, GLfixed u1, GLfixed u2, GLfixed v1, GLfixed v2);
-GLAPI void APIENTRY glMaterialxOES (GLenum face, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glMaterialxvOES (GLenum face, GLenum pname, const GLfixed *param);
-GLAPI void APIENTRY glMultMatrixxOES (const GLfixed *m);
-GLAPI void APIENTRY glMultTransposeMatrixxOES (const GLfixed *m);
-GLAPI void APIENTRY glMultiTexCoord1xOES (GLenum texture, GLfixed s);
-GLAPI void APIENTRY glMultiTexCoord2xOES (GLenum texture, GLfixed s, GLfixed t);
-GLAPI void APIENTRY glMultiTexCoord3xOES (GLenum texture, GLfixed s, GLfixed t, GLfixed r);
-GLAPI void APIENTRY glMultiTexCoord4xOES (GLenum texture, GLfixed s, GLfixed t, GLfixed r, GLfixed q);
-GLAPI void APIENTRY glMultiTexCoord1xvOES (GLenum texture, const GLfixed *coords);
-GLAPI void APIENTRY glMultiTexCoord2xvOES (GLenum texture, const GLfixed *coords);
-GLAPI void APIENTRY glMultiTexCoord3xvOES (GLenum texture, const GLfixed *coords);
-GLAPI void APIENTRY glMultiTexCoord4xvOES (GLenum texture, const GLfixed *coords);
-GLAPI void APIENTRY glNormal3xOES (GLfixed nx, GLfixed ny, GLfixed nz);
-GLAPI void APIENTRY glNormal3xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glOrthoxOES (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
-GLAPI void APIENTRY glPassThroughxOES (GLfixed token);
-GLAPI void APIENTRY glPixelMapx (GLenum map, GLint size, const GLfixed *values);
-GLAPI void APIENTRY glPixelStorex (GLenum pname, GLfixed param);
-GLAPI void APIENTRY glPixelTransferxOES (GLenum pname, GLfixed param);
-GLAPI void APIENTRY glPixelZoomxOES (GLfixed xfactor, GLfixed yfactor);
-GLAPI void APIENTRY glPointParameterxvOES (GLenum pname, const GLfixed *params);
-GLAPI void APIENTRY glPointSizexOES (GLfixed size);
-GLAPI void APIENTRY glPolygonOffsetxOES (GLfixed factor, GLfixed units);
-GLAPI void APIENTRY glPrioritizeTexturesxOES (GLsizei n, const GLuint *textures, const GLfixed *priorities);
-GLAPI void APIENTRY glRasterPos2xOES (GLfixed x, GLfixed y);
-GLAPI void APIENTRY glRasterPos3xOES (GLfixed x, GLfixed y, GLfixed z);
-GLAPI void APIENTRY glRasterPos4xOES (GLfixed x, GLfixed y, GLfixed z, GLfixed w);
-GLAPI void APIENTRY glRasterPos2xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glRasterPos3xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glRasterPos4xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glRectxOES (GLfixed x1, GLfixed y1, GLfixed x2, GLfixed y2);
-GLAPI void APIENTRY glRectxvOES (const GLfixed *v1, const GLfixed *v2);
-GLAPI void APIENTRY glRotatexOES (GLfixed angle, GLfixed x, GLfixed y, GLfixed z);
-GLAPI void APIENTRY glSampleCoverageOES (GLfixed value, GLboolean invert);
-GLAPI void APIENTRY glScalexOES (GLfixed x, GLfixed y, GLfixed z);
-GLAPI void APIENTRY glTexCoord1xOES (GLfixed s);
-GLAPI void APIENTRY glTexCoord2xOES (GLfixed s, GLfixed t);
-GLAPI void APIENTRY glTexCoord3xOES (GLfixed s, GLfixed t, GLfixed r);
-GLAPI void APIENTRY glTexCoord4xOES (GLfixed s, GLfixed t, GLfixed r, GLfixed q);
-GLAPI void APIENTRY glTexCoord1xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glTexCoord2xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glTexCoord3xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glTexCoord4xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glTexEnvxOES (GLenum target, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glTexEnvxvOES (GLenum target, GLenum pname, const GLfixed *params);
-GLAPI void APIENTRY glTexGenxOES (GLenum coord, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glTexGenxvOES (GLenum coord, GLenum pname, const GLfixed *params);
-GLAPI void APIENTRY glTexParameterxOES (GLenum target, GLenum pname, GLfixed param);
-GLAPI void APIENTRY glTexParameterxvOES (GLenum target, GLenum pname, const GLfixed *params);
-GLAPI void APIENTRY glTranslatexOES (GLfixed x, GLfixed y, GLfixed z);
-GLAPI void APIENTRY glVertex2xOES (GLfixed x);
-GLAPI void APIENTRY glVertex3xOES (GLfixed x, GLfixed y);
-GLAPI void APIENTRY glVertex4xOES (GLfixed x, GLfixed y, GLfixed z);
-GLAPI void APIENTRY glVertex2xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glVertex3xvOES (const GLfixed *coords);
-GLAPI void APIENTRY glVertex4xvOES (const GLfixed *coords);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLACCUMXOESPROC) (GLenum op, GLfixed value);
-typedef void (APIENTRYP PFNGLALPHAFUNCXOESPROC) (GLenum func, GLfixed ref);
-typedef void (APIENTRYP PFNGLBITMAPXOESPROC) (GLsizei width, GLsizei height, GLfixed xorig, GLfixed yorig, GLfixed xmove, GLfixed ymove, const GLubyte *bitmap);
-typedef void (APIENTRYP PFNGLBLENDCOLORXOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-typedef void (APIENTRYP PFNGLCLEARACCUMXOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-typedef void (APIENTRYP PFNGLCLEARCOLORXOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-typedef void (APIENTRYP PFNGLCLEARDEPTHXOESPROC) (GLfixed depth);
-typedef void (APIENTRYP PFNGLCLIPPLANEXOESPROC) (GLenum plane, const GLfixed *equation);
-typedef void (APIENTRYP PFNGLCOLOR3XOESPROC) (GLfixed red, GLfixed green, GLfixed blue);
-typedef void (APIENTRYP PFNGLCOLOR4XOESPROC) (GLfixed red, GLfixed green, GLfixed blue, GLfixed alpha);
-typedef void (APIENTRYP PFNGLCOLOR3XVOESPROC) (const GLfixed *components);
-typedef void (APIENTRYP PFNGLCOLOR4XVOESPROC) (const GLfixed *components);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERXOESPROC) (GLenum target, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERXVOESPROC) (GLenum target, GLenum pname, const GLfixed *params);
-typedef void (APIENTRYP PFNGLDEPTHRANGEXOESPROC) (GLfixed n, GLfixed f);
-typedef void (APIENTRYP PFNGLEVALCOORD1XOESPROC) (GLfixed u);
-typedef void (APIENTRYP PFNGLEVALCOORD2XOESPROC) (GLfixed u, GLfixed v);
-typedef void (APIENTRYP PFNGLEVALCOORD1XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLEVALCOORD2XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLFEEDBACKBUFFERXOESPROC) (GLsizei n, GLenum type, const GLfixed *buffer);
-typedef void (APIENTRYP PFNGLFOGXOESPROC) (GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLFOGXVOESPROC) (GLenum pname, const GLfixed *param);
-typedef void (APIENTRYP PFNGLFRUSTUMXOESPROC) (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
-typedef void (APIENTRYP PFNGLGETCLIPPLANEXOESPROC) (GLenum plane, GLfixed *equation);
-typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETFIXEDVOESPROC) (GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETLIGHTXOESPROC) (GLenum light, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETMAPXVOESPROC) (GLenum target, GLenum query, GLfixed *v);
-typedef void (APIENTRYP PFNGLGETMATERIALXOESPROC) (GLenum face, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLGETPIXELMAPXVPROC) (GLenum map, GLint size, GLfixed *values);
-typedef void (APIENTRYP PFNGLGETTEXENVXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETTEXGENXVOESPROC) (GLenum coord, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETTEXLEVELPARAMETERXVOESPROC) (GLenum target, GLint level, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLGETTEXPARAMETERXVOESPROC) (GLenum target, GLenum pname, GLfixed *params);
-typedef void (APIENTRYP PFNGLINDEXXOESPROC) (GLfixed component);
-typedef void (APIENTRYP PFNGLINDEXXVOESPROC) (const GLfixed *component);
-typedef void (APIENTRYP PFNGLLIGHTMODELXOESPROC) (GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLLIGHTMODELXVOESPROC) (GLenum pname, const GLfixed *param);
-typedef void (APIENTRYP PFNGLLIGHTXOESPROC) (GLenum light, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLLIGHTXVOESPROC) (GLenum light, GLenum pname, const GLfixed *params);
-typedef void (APIENTRYP PFNGLLINEWIDTHXOESPROC) (GLfixed width);
-typedef void (APIENTRYP PFNGLLOADMATRIXXOESPROC) (const GLfixed *m);
-typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXXOESPROC) (const GLfixed *m);
-typedef void (APIENTRYP PFNGLMAP1XOESPROC) (GLenum target, GLfixed u1, GLfixed u2, GLint stride, GLint order, GLfixed points);
-typedef void (APIENTRYP PFNGLMAP2XOESPROC) (GLenum target, GLfixed u1, GLfixed u2, GLint ustride, GLint uorder, GLfixed v1, GLfixed v2, GLint vstride, GLint vorder, GLfixed points);
-typedef void (APIENTRYP PFNGLMAPGRID1XOESPROC) (GLint n, GLfixed u1, GLfixed u2);
-typedef void (APIENTRYP PFNGLMAPGRID2XOESPROC) (GLint n, GLfixed u1, GLfixed u2, GLfixed v1, GLfixed v2);
-typedef void (APIENTRYP PFNGLMATERIALXOESPROC) (GLenum face, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLMATERIALXVOESPROC) (GLenum face, GLenum pname, const GLfixed *param);
-typedef void (APIENTRYP PFNGLMULTMATRIXXOESPROC) (const GLfixed *m);
-typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXXOESPROC) (const GLfixed *m);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1XOESPROC) (GLenum texture, GLfixed s);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2XOESPROC) (GLenum texture, GLfixed s, GLfixed t);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3XOESPROC) (GLenum texture, GLfixed s, GLfixed t, GLfixed r);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4XOESPROC) (GLenum texture, GLfixed s, GLfixed t, GLfixed r, GLfixed q);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD1XVOESPROC) (GLenum texture, const GLfixed *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD2XVOESPROC) (GLenum texture, const GLfixed *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD3XVOESPROC) (GLenum texture, const GLfixed *coords);
-typedef void (APIENTRYP PFNGLMULTITEXCOORD4XVOESPROC) (GLenum texture, const GLfixed *coords);
-typedef void (APIENTRYP PFNGLNORMAL3XOESPROC) (GLfixed nx, GLfixed ny, GLfixed nz);
-typedef void (APIENTRYP PFNGLNORMAL3XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLORTHOXOESPROC) (GLfixed l, GLfixed r, GLfixed b, GLfixed t, GLfixed n, GLfixed f);
-typedef void (APIENTRYP PFNGLPASSTHROUGHXOESPROC) (GLfixed token);
-typedef void (APIENTRYP PFNGLPIXELMAPXPROC) (GLenum map, GLint size, const GLfixed *values);
-typedef void (APIENTRYP PFNGLPIXELSTOREXPROC) (GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLPIXELTRANSFERXOESPROC) (GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLPIXELZOOMXOESPROC) (GLfixed xfactor, GLfixed yfactor);
-typedef void (APIENTRYP PFNGLPOINTPARAMETERXVOESPROC) (GLenum pname, const GLfixed *params);
-typedef void (APIENTRYP PFNGLPOINTSIZEXOESPROC) (GLfixed size);
-typedef void (APIENTRYP PFNGLPOLYGONOFFSETXOESPROC) (GLfixed factor, GLfixed units);
-typedef void (APIENTRYP PFNGLPRIORITIZETEXTURESXOESPROC) (GLsizei n, const GLuint *textures, const GLfixed *priorities);
-typedef void (APIENTRYP PFNGLRASTERPOS2XOESPROC) (GLfixed x, GLfixed y);
-typedef void (APIENTRYP PFNGLRASTERPOS3XOESPROC) (GLfixed x, GLfixed y, GLfixed z);
-typedef void (APIENTRYP PFNGLRASTERPOS4XOESPROC) (GLfixed x, GLfixed y, GLfixed z, GLfixed w);
-typedef void (APIENTRYP PFNGLRASTERPOS2XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLRASTERPOS3XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLRASTERPOS4XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLRECTXOESPROC) (GLfixed x1, GLfixed y1, GLfixed x2, GLfixed y2);
-typedef void (APIENTRYP PFNGLRECTXVOESPROC) (const GLfixed *v1, const GLfixed *v2);
-typedef void (APIENTRYP PFNGLROTATEXOESPROC) (GLfixed angle, GLfixed x, GLfixed y, GLfixed z);
-typedef void (APIENTRYP PFNGLSAMPLECOVERAGEOESPROC) (GLfixed value, GLboolean invert);
-typedef void (APIENTRYP PFNGLSCALEXOESPROC) (GLfixed x, GLfixed y, GLfixed z);
-typedef void (APIENTRYP PFNGLTEXCOORD1XOESPROC) (GLfixed s);
-typedef void (APIENTRYP PFNGLTEXCOORD2XOESPROC) (GLfixed s, GLfixed t);
-typedef void (APIENTRYP PFNGLTEXCOORD3XOESPROC) (GLfixed s, GLfixed t, GLfixed r);
-typedef void (APIENTRYP PFNGLTEXCOORD4XOESPROC) (GLfixed s, GLfixed t, GLfixed r, GLfixed q);
-typedef void (APIENTRYP PFNGLTEXCOORD1XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD2XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD3XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLTEXCOORD4XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLTEXENVXOESPROC) (GLenum target, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLTEXENVXVOESPROC) (GLenum target, GLenum pname, const GLfixed *params);
-typedef void (APIENTRYP PFNGLTEXGENXOESPROC) (GLenum coord, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLTEXGENXVOESPROC) (GLenum coord, GLenum pname, const GLfixed *params);
-typedef void (APIENTRYP PFNGLTEXPARAMETERXOESPROC) (GLenum target, GLenum pname, GLfixed param);
-typedef void (APIENTRYP PFNGLTEXPARAMETERXVOESPROC) (GLenum target, GLenum pname, const GLfixed *params);
-typedef void (APIENTRYP PFNGLTRANSLATEXOESPROC) (GLfixed x, GLfixed y, GLfixed z);
-typedef void (APIENTRYP PFNGLVERTEX2XOESPROC) (GLfixed x);
-typedef void (APIENTRYP PFNGLVERTEX3XOESPROC) (GLfixed x, GLfixed y);
-typedef void (APIENTRYP PFNGLVERTEX4XOESPROC) (GLfixed x, GLfixed y, GLfixed z);
-typedef void (APIENTRYP PFNGLVERTEX2XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLVERTEX3XVOESPROC) (const GLfixed *coords);
-typedef void (APIENTRYP PFNGLVERTEX4XVOESPROC) (const GLfixed *coords);
-#endif
-
-#ifndef GL_OES_single_precision
-#define GL_OES_single_precision 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDepthRangefOES (GLclampf n, GLclampf f);
-GLAPI void APIENTRY glFrustumfOES (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
-GLAPI void APIENTRY glOrthofOES (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
-GLAPI void APIENTRY glClipPlanefOES (GLenum plane, const GLfloat *equation);
-GLAPI void APIENTRY glClearDepthfOES (GLclampd depth);
-GLAPI void APIENTRY glGetClipPlanefOES (GLenum plane, GLfloat *equation);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEPTHRANGEFOESPROC) (GLclampf n, GLclampf f);
-typedef void (APIENTRYP PFNGLFRUSTUMFOESPROC) (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
-typedef void (APIENTRYP PFNGLORTHOFOESPROC) (GLfloat l, GLfloat r, GLfloat b, GLfloat t, GLfloat n, GLfloat f);
-typedef void (APIENTRYP PFNGLCLIPPLANEFOESPROC) (GLenum plane, const GLfloat *equation);
-typedef void (APIENTRYP PFNGLCLEARDEPTHFOESPROC) (GLclampd depth);
-typedef void (APIENTRYP PFNGLGETCLIPPLANEFOESPROC) (GLenum plane, GLfloat *equation);
-#endif
-
-#ifndef GL_OES_compressed_paletted_texture
-#define GL_OES_compressed_paletted_texture 1
-#endif
-
-#ifndef GL_OES_read_format
-#define GL_OES_read_format 1
-#endif
-
-#ifndef GL_OES_query_matrix
-#define GL_OES_query_matrix 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLbitfield APIENTRY glQueryMatrixxOES (const GLfixed *mantissa, const GLint *exponent);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLbitfield (APIENTRYP PFNGLQUERYMATRIXXOESPROC) (const GLfixed *mantissa, const GLint *exponent);
-#endif
-
-#ifndef GL_EXT_depth_bounds_test
-#define GL_EXT_depth_bounds_test 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDepthBoundsEXT (GLclampd zmin, GLclampd zmax);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEPTHBOUNDSEXTPROC) (GLclampd zmin, GLclampd zmax);
-#endif
-
-#ifndef GL_EXT_texture_mirror_clamp
-#define GL_EXT_texture_mirror_clamp 1
-#endif
-
-#ifndef GL_EXT_blend_equation_separate
-#define GL_EXT_blend_equation_separate 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendEquationSeparateEXT (GLenum modeRGB, GLenum modeAlpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEEXTPROC) (GLenum modeRGB, GLenum modeAlpha);
-#endif
-
-#ifndef GL_MESA_pack_invert
-#define GL_MESA_pack_invert 1
-#endif
-
-#ifndef GL_MESA_ycbcr_texture
-#define GL_MESA_ycbcr_texture 1
-#endif
-
-#ifndef GL_EXT_pixel_buffer_object
-#define GL_EXT_pixel_buffer_object 1
-#endif
-
-#ifndef GL_NV_fragment_program_option
-#define GL_NV_fragment_program_option 1
-#endif
-
-#ifndef GL_NV_fragment_program2
-#define GL_NV_fragment_program2 1
-#endif
+#endif /* GL_NV_vertex_program2 */
 
 #ifndef GL_NV_vertex_program2_option
 #define GL_NV_vertex_program2_option 1
-#endif
+#endif /* GL_NV_vertex_program2_option */
 
 #ifndef GL_NV_vertex_program3
 #define GL_NV_vertex_program3 1
-#endif
-
-#ifndef GL_EXT_framebuffer_object
-#define GL_EXT_framebuffer_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLboolean APIENTRY glIsRenderbufferEXT (GLuint renderbuffer);
-GLAPI void APIENTRY glBindRenderbufferEXT (GLenum target, GLuint renderbuffer);
-GLAPI void APIENTRY glDeleteRenderbuffersEXT (GLsizei n, const GLuint *renderbuffers);
-GLAPI void APIENTRY glGenRenderbuffersEXT (GLsizei n, GLuint *renderbuffers);
-GLAPI void APIENTRY glRenderbufferStorageEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetRenderbufferParameterivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI GLboolean APIENTRY glIsFramebufferEXT (GLuint framebuffer);
-GLAPI void APIENTRY glBindFramebufferEXT (GLenum target, GLuint framebuffer);
-GLAPI void APIENTRY glDeleteFramebuffersEXT (GLsizei n, const GLuint *framebuffers);
-GLAPI void APIENTRY glGenFramebuffersEXT (GLsizei n, GLuint *framebuffers);
-GLAPI GLenum APIENTRY glCheckFramebufferStatusEXT (GLenum target);
-GLAPI void APIENTRY glFramebufferTexture1DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-GLAPI void APIENTRY glFramebufferTexture2DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-GLAPI void APIENTRY glFramebufferTexture3DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-GLAPI void APIENTRY glFramebufferRenderbufferEXT (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
-GLAPI void APIENTRY glGetFramebufferAttachmentParameterivEXT (GLenum target, GLenum attachment, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGenerateMipmapEXT (GLenum target);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLboolean (APIENTRYP PFNGLISRENDERBUFFEREXTPROC) (GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLBINDRENDERBUFFEREXTPROC) (GLenum target, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLDELETERENDERBUFFERSEXTPROC) (GLsizei n, const GLuint *renderbuffers);
-typedef void (APIENTRYP PFNGLGENRENDERBUFFERSEXTPROC) (GLsizei n, GLuint *renderbuffers);
-typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETRENDERBUFFERPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef GLboolean (APIENTRYP PFNGLISFRAMEBUFFEREXTPROC) (GLuint framebuffer);
-typedef void (APIENTRYP PFNGLBINDFRAMEBUFFEREXTPROC) (GLenum target, GLuint framebuffer);
-typedef void (APIENTRYP PFNGLDELETEFRAMEBUFFERSEXTPROC) (GLsizei n, const GLuint *framebuffers);
-typedef void (APIENTRYP PFNGLGENFRAMEBUFFERSEXTPROC) (GLsizei n, GLuint *framebuffers);
-typedef GLenum (APIENTRYP PFNGLCHECKFRAMEBUFFERSTATUSEXTPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE1DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERRENDERBUFFEREXTPROC) (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLGETFRAMEBUFFERATTACHMENTPARAMETERIVEXTPROC) (GLenum target, GLenum attachment, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGENERATEMIPMAPEXTPROC) (GLenum target);
-#endif
-
-#ifndef GL_GREMEDY_string_marker
-#define GL_GREMEDY_string_marker 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glStringMarkerGREMEDY (GLsizei len, const GLvoid *string);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSTRINGMARKERGREMEDYPROC) (GLsizei len, const GLvoid *string);
-#endif
-
-#ifndef GL_EXT_packed_depth_stencil
-#define GL_EXT_packed_depth_stencil 1
-#endif
-
-#ifndef GL_EXT_stencil_clear_tag
-#define GL_EXT_stencil_clear_tag 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glStencilClearTagEXT (GLsizei stencilTagBits, GLuint stencilClearTag);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSTENCILCLEARTAGEXTPROC) (GLsizei stencilTagBits, GLuint stencilClearTag);
-#endif
-
-#ifndef GL_EXT_texture_sRGB
-#define GL_EXT_texture_sRGB 1
-#endif
-
-#ifndef GL_EXT_framebuffer_blit
-#define GL_EXT_framebuffer_blit 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlitFramebufferEXT (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLITFRAMEBUFFEREXTPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-#endif
-
-#ifndef GL_EXT_framebuffer_multisample
-#define GL_EXT_framebuffer_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glRenderbufferStorageMultisampleEXT (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-#endif
-
-#ifndef GL_MESAX_texture_stack
-#define GL_MESAX_texture_stack 1
-#endif
-
-#ifndef GL_EXT_timer_query
-#define GL_EXT_timer_query 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetQueryObjecti64vEXT (GLuint id, GLenum pname, GLint64EXT *params);
-GLAPI void APIENTRY glGetQueryObjectui64vEXT (GLuint id, GLenum pname, GLuint64EXT *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTI64VEXTPROC) (GLuint id, GLenum pname, GLint64EXT *params);
-typedef void (APIENTRYP PFNGLGETQUERYOBJECTUI64VEXTPROC) (GLuint id, GLenum pname, GLuint64EXT *params);
-#endif
-
-#ifndef GL_EXT_gpu_program_parameters
-#define GL_EXT_gpu_program_parameters 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramEnvParameters4fvEXT (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
-GLAPI void APIENTRY glProgramLocalParameters4fvEXT (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERS4FVEXTPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERS4FVEXTPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *params);
-#endif
-
-#ifndef GL_APPLE_flush_buffer_range
-#define GL_APPLE_flush_buffer_range 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBufferParameteriAPPLE (GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glFlushMappedBufferRangeAPPLE (GLenum target, GLintptr offset, GLsizeiptr size);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBUFFERPARAMETERIAPPLEPROC) (GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEAPPLEPROC) (GLenum target, GLintptr offset, GLsizeiptr size);
-#endif
-
-#ifndef GL_NV_gpu_program4
-#define GL_NV_gpu_program4 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramLocalParameterI4iNV (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
-GLAPI void APIENTRY glProgramLocalParameterI4ivNV (GLenum target, GLuint index, const GLint *params);
-GLAPI void APIENTRY glProgramLocalParametersI4ivNV (GLenum target, GLuint index, GLsizei count, const GLint *params);
-GLAPI void APIENTRY glProgramLocalParameterI4uiNV (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-GLAPI void APIENTRY glProgramLocalParameterI4uivNV (GLenum target, GLuint index, const GLuint *params);
-GLAPI void APIENTRY glProgramLocalParametersI4uivNV (GLenum target, GLuint index, GLsizei count, const GLuint *params);
-GLAPI void APIENTRY glProgramEnvParameterI4iNV (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
-GLAPI void APIENTRY glProgramEnvParameterI4ivNV (GLenum target, GLuint index, const GLint *params);
-GLAPI void APIENTRY glProgramEnvParametersI4ivNV (GLenum target, GLuint index, GLsizei count, const GLint *params);
-GLAPI void APIENTRY glProgramEnvParameterI4uiNV (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-GLAPI void APIENTRY glProgramEnvParameterI4uivNV (GLenum target, GLuint index, const GLuint *params);
-GLAPI void APIENTRY glProgramEnvParametersI4uivNV (GLenum target, GLuint index, GLsizei count, const GLuint *params);
-GLAPI void APIENTRY glGetProgramLocalParameterIivNV (GLenum target, GLuint index, GLint *params);
-GLAPI void APIENTRY glGetProgramLocalParameterIuivNV (GLenum target, GLuint index, GLuint *params);
-GLAPI void APIENTRY glGetProgramEnvParameterIivNV (GLenum target, GLuint index, GLint *params);
-GLAPI void APIENTRY glGetProgramEnvParameterIuivNV (GLenum target, GLuint index, GLuint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4INVPROC) (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4IVNVPROC) (GLenum target, GLuint index, const GLint *params);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERSI4IVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLint *params);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4UINVPROC) (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4UIVNVPROC) (GLenum target, GLuint index, const GLuint *params);
-typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERSI4UIVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLuint *params);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4INVPROC) (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4IVNVPROC) (GLenum target, GLuint index, const GLint *params);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERSI4IVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLint *params);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4UINVPROC) (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4UIVNVPROC) (GLenum target, GLuint index, const GLuint *params);
-typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERSI4UIVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERIIVNVPROC) (GLenum target, GLuint index, GLint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERIUIVNVPROC) (GLenum target, GLuint index, GLuint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERIIVNVPROC) (GLenum target, GLuint index, GLint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERIUIVNVPROC) (GLenum target, GLuint index, GLuint *params);
-#endif
-
-#ifndef GL_NV_geometry_program4
-#define GL_NV_geometry_program4 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramVertexLimitNV (GLenum target, GLint limit);
-GLAPI void APIENTRY glFramebufferTextureEXT (GLenum target, GLenum attachment, GLuint texture, GLint level);
-GLAPI void APIENTRY glFramebufferTextureLayerEXT (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
-GLAPI void APIENTRY glFramebufferTextureFaceEXT (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMVERTEXLIMITNVPROC) (GLenum target, GLint limit);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYEREXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREFACEEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face);
-#endif
-
-#ifndef GL_EXT_geometry_shader4
-#define GL_EXT_geometry_shader4 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramParameteriEXT (GLuint program, GLenum pname, GLint value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIEXTPROC) (GLuint program, GLenum pname, GLint value);
-#endif
+#endif /* GL_NV_vertex_program3 */
 
 #ifndef GL_NV_vertex_program4
 #define GL_NV_vertex_program4 1
+#define GL_VERTEX_ATTRIB_ARRAY_INTEGER_NV 0x88FD
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IEXTPROC) (GLuint index, GLint x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IEXTPROC) (GLuint index, GLint x, GLint y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IEXTPROC) (GLuint index, GLint x, GLint y, GLint z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IEXTPROC) (GLuint index, GLint x, GLint y, GLint z, GLint w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIEXTPROC) (GLuint index, GLuint x);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIEXTPROC) (GLuint index, GLuint x, GLuint y);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIEXTPROC) (GLuint index, GLuint x, GLuint y, GLuint z);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIEXTPROC) (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IVEXTPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IVEXTPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IVEXTPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IVEXTPROC) (GLuint index, const GLint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIVEXTPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIVEXTPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIVEXTPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIVEXTPROC) (GLuint index, const GLuint *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4BVEXTPROC) (GLuint index, const GLbyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4SVEXTPROC) (GLuint index, const GLshort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UBVEXTPROC) (GLuint index, const GLubyte *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBI4USVEXTPROC) (GLuint index, const GLushort *v);
+typedef void (APIENTRYP PFNGLVERTEXATTRIBIPOINTEREXTPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIIVEXTPROC) (GLuint index, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIUIVEXTPROC) (GLuint index, GLenum pname, GLuint *params);
 #ifdef GL_GLEXT_PROTOTYPES
 GLAPI void APIENTRY glVertexAttribI1iEXT (GLuint index, GLint x);
 GLAPI void APIENTRY glVertexAttribI2iEXT (GLuint index, GLint x, GLint y);
@@ -11625,1521 +10612,1010 @@ GLAPI void APIENTRY glVertexAttribI4bvEXT (GLuint index, const GLbyte *v);
 GLAPI void APIENTRY glVertexAttribI4svEXT (GLuint index, const GLshort *v);
 GLAPI void APIENTRY glVertexAttribI4ubvEXT (GLuint index, const GLubyte *v);
 GLAPI void APIENTRY glVertexAttribI4usvEXT (GLuint index, const GLushort *v);
-GLAPI void APIENTRY glVertexAttribIPointerEXT (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
+GLAPI void APIENTRY glVertexAttribIPointerEXT (GLuint index, GLint size, GLenum type, GLsizei stride, const void *pointer);
 GLAPI void APIENTRY glGetVertexAttribIivEXT (GLuint index, GLenum pname, GLint *params);
 GLAPI void APIENTRY glGetVertexAttribIuivEXT (GLuint index, GLenum pname, GLuint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IEXTPROC) (GLuint index, GLint x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IEXTPROC) (GLuint index, GLint x, GLint y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IEXTPROC) (GLuint index, GLint x, GLint y, GLint z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IEXTPROC) (GLuint index, GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIEXTPROC) (GLuint index, GLuint x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIEXTPROC) (GLuint index, GLuint x, GLuint y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIEXTPROC) (GLuint index, GLuint x, GLuint y, GLuint z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIEXTPROC) (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IVEXTPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IVEXTPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IVEXTPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IVEXTPROC) (GLuint index, const GLint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIVEXTPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIVEXTPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIVEXTPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIVEXTPROC) (GLuint index, const GLuint *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4BVEXTPROC) (GLuint index, const GLbyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4SVEXTPROC) (GLuint index, const GLshort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UBVEXTPROC) (GLuint index, const GLubyte *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBI4USVEXTPROC) (GLuint index, const GLushort *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBIPOINTEREXTPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIIVEXTPROC) (GLuint index, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIUIVEXTPROC) (GLuint index, GLenum pname, GLuint *params);
 #endif
+#endif /* GL_NV_vertex_program4 */
 
-#ifndef GL_EXT_gpu_shader4
-#define GL_EXT_gpu_shader4 1
+#ifndef GL_NV_video_capture
+#define GL_NV_video_capture 1
+#define GL_VIDEO_BUFFER_NV                0x9020
+#define GL_VIDEO_BUFFER_BINDING_NV        0x9021
+#define GL_FIELD_UPPER_NV                 0x9022
+#define GL_FIELD_LOWER_NV                 0x9023
+#define GL_NUM_VIDEO_CAPTURE_STREAMS_NV   0x9024
+#define GL_NEXT_VIDEO_CAPTURE_BUFFER_STATUS_NV 0x9025
+#define GL_VIDEO_CAPTURE_TO_422_SUPPORTED_NV 0x9026
+#define GL_LAST_VIDEO_CAPTURE_STATUS_NV   0x9027
+#define GL_VIDEO_BUFFER_PITCH_NV          0x9028
+#define GL_VIDEO_COLOR_CONVERSION_MATRIX_NV 0x9029
+#define GL_VIDEO_COLOR_CONVERSION_MAX_NV  0x902A
+#define GL_VIDEO_COLOR_CONVERSION_MIN_NV  0x902B
+#define GL_VIDEO_COLOR_CONVERSION_OFFSET_NV 0x902C
+#define GL_VIDEO_BUFFER_INTERNAL_FORMAT_NV 0x902D
+#define GL_PARTIAL_SUCCESS_NV             0x902E
+#define GL_SUCCESS_NV                     0x902F
+#define GL_FAILURE_NV                     0x9030
+#define GL_YCBYCR8_422_NV                 0x9031
+#define GL_YCBAYCR8A_4224_NV              0x9032
+#define GL_Z6Y10Z6CB10Z6Y10Z6CR10_422_NV  0x9033
+#define GL_Z6Y10Z6CB10Z6A10Z6Y10Z6CR10Z6A10_4224_NV 0x9034
+#define GL_Z4Y12Z4CB12Z4Y12Z4CR12_422_NV  0x9035
+#define GL_Z4Y12Z4CB12Z4A12Z4Y12Z4CR12Z4A12_4224_NV 0x9036
+#define GL_Z4Y12Z4CB12Z4CR12_444_NV       0x9037
+#define GL_VIDEO_CAPTURE_FRAME_WIDTH_NV   0x9038
+#define GL_VIDEO_CAPTURE_FRAME_HEIGHT_NV  0x9039
+#define GL_VIDEO_CAPTURE_FIELD_UPPER_HEIGHT_NV 0x903A
+#define GL_VIDEO_CAPTURE_FIELD_LOWER_HEIGHT_NV 0x903B
+#define GL_VIDEO_CAPTURE_SURFACE_ORIGIN_NV 0x903C
+typedef void (APIENTRYP PFNGLBEGINVIDEOCAPTURENVPROC) (GLuint video_capture_slot);
+typedef void (APIENTRYP PFNGLBINDVIDEOCAPTURESTREAMBUFFERNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLintptrARB offset);
+typedef void (APIENTRYP PFNGLBINDVIDEOCAPTURESTREAMTEXTURENVPROC) (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLenum target, GLuint texture);
+typedef void (APIENTRYP PFNGLENDVIDEOCAPTURENVPROC) (GLuint video_capture_slot);
+typedef void (APIENTRYP PFNGLGETVIDEOCAPTUREIVNVPROC) (GLuint video_capture_slot, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMIVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMFVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMDVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLdouble *params);
+typedef GLenum (APIENTRYP PFNGLVIDEOCAPTURENVPROC) (GLuint video_capture_slot, GLuint *sequence_num, GLuint64EXT *capture_time);
+typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERIVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERFVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERDVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLdouble *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetUniformuivEXT (GLuint program, GLint location, GLuint *params);
-GLAPI void APIENTRY glBindFragDataLocationEXT (GLuint program, GLuint color, const GLchar *name);
-GLAPI GLint APIENTRY glGetFragDataLocationEXT (GLuint program, const GLchar *name);
-GLAPI void APIENTRY glUniform1uiEXT (GLint location, GLuint v0);
-GLAPI void APIENTRY glUniform2uiEXT (GLint location, GLuint v0, GLuint v1);
-GLAPI void APIENTRY glUniform3uiEXT (GLint location, GLuint v0, GLuint v1, GLuint v2);
-GLAPI void APIENTRY glUniform4uiEXT (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-GLAPI void APIENTRY glUniform1uivEXT (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glUniform2uivEXT (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glUniform3uivEXT (GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glUniform4uivEXT (GLint location, GLsizei count, const GLuint *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETUNIFORMUIVEXTPROC) (GLuint program, GLint location, GLuint *params);
-typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONEXTPROC) (GLuint program, GLuint color, const GLchar *name);
-typedef GLint (APIENTRYP PFNGLGETFRAGDATALOCATIONEXTPROC) (GLuint program, const GLchar *name);
-typedef void (APIENTRYP PFNGLUNIFORM1UIEXTPROC) (GLint location, GLuint v0);
-typedef void (APIENTRYP PFNGLUNIFORM2UIEXTPROC) (GLint location, GLuint v0, GLuint v1);
-typedef void (APIENTRYP PFNGLUNIFORM3UIEXTPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2);
-typedef void (APIENTRYP PFNGLUNIFORM4UIEXTPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-typedef void (APIENTRYP PFNGLUNIFORM1UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLUNIFORM2UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLUNIFORM3UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLUNIFORM4UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value);
+GLAPI void APIENTRY glBeginVideoCaptureNV (GLuint video_capture_slot);
+GLAPI void APIENTRY glBindVideoCaptureStreamBufferNV (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLintptrARB offset);
+GLAPI void APIENTRY glBindVideoCaptureStreamTextureNV (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLenum target, GLuint texture);
+GLAPI void APIENTRY glEndVideoCaptureNV (GLuint video_capture_slot);
+GLAPI void APIENTRY glGetVideoCaptureivNV (GLuint video_capture_slot, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVideoCaptureStreamivNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetVideoCaptureStreamfvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetVideoCaptureStreamdvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLdouble *params);
+GLAPI GLenum APIENTRY glVideoCaptureNV (GLuint video_capture_slot, GLuint *sequence_num, GLuint64EXT *capture_time);
+GLAPI void APIENTRY glVideoCaptureStreamParameterivNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glVideoCaptureStreamParameterfvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glVideoCaptureStreamParameterdvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLdouble *params);
 #endif
+#endif /* GL_NV_video_capture */
 
-#ifndef GL_EXT_draw_instanced
-#define GL_EXT_draw_instanced 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawArraysInstancedEXT (GLenum mode, GLint start, GLsizei count, GLsizei primcount);
-GLAPI void APIENTRY glDrawElementsInstancedEXT (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDEXTPROC) (GLenum mode, GLint start, GLsizei count, GLsizei primcount);
-typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDEXTPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount);
-#endif
+#ifndef GL_OML_interlace
+#define GL_OML_interlace 1
+#define GL_INTERLACE_OML                  0x8980
+#define GL_INTERLACE_READ_OML             0x8981
+#endif /* GL_OML_interlace */
 
-#ifndef GL_EXT_packed_float
-#define GL_EXT_packed_float 1
-#endif
+#ifndef GL_OML_resample
+#define GL_OML_resample 1
+#define GL_PACK_RESAMPLE_OML              0x8984
+#define GL_UNPACK_RESAMPLE_OML            0x8985
+#define GL_RESAMPLE_REPLICATE_OML         0x8986
+#define GL_RESAMPLE_ZERO_FILL_OML         0x8987
+#define GL_RESAMPLE_AVERAGE_OML           0x8988
+#define GL_RESAMPLE_DECIMATE_OML          0x8989
+#endif /* GL_OML_resample */
 
-#ifndef GL_EXT_texture_array
-#define GL_EXT_texture_array 1
-#endif
+#ifndef GL_OML_subsample
+#define GL_OML_subsample 1
+#define GL_FORMAT_SUBSAMPLE_24_24_OML     0x8982
+#define GL_FORMAT_SUBSAMPLE_244_244_OML   0x8983
+#endif /* GL_OML_subsample */
 
-#ifndef GL_EXT_texture_buffer_object
-#define GL_EXT_texture_buffer_object 1
+#ifndef GL_PGI_misc_hints
+#define GL_PGI_misc_hints 1
+#define GL_PREFER_DOUBLEBUFFER_HINT_PGI   0x1A1F8
+#define GL_CONSERVE_MEMORY_HINT_PGI       0x1A1FD
+#define GL_RECLAIM_MEMORY_HINT_PGI        0x1A1FE
+#define GL_NATIVE_GRAPHICS_HANDLE_PGI     0x1A202
+#define GL_NATIVE_GRAPHICS_BEGIN_HINT_PGI 0x1A203
+#define GL_NATIVE_GRAPHICS_END_HINT_PGI   0x1A204
+#define GL_ALWAYS_FAST_HINT_PGI           0x1A20C
+#define GL_ALWAYS_SOFT_HINT_PGI           0x1A20D
+#define GL_ALLOW_DRAW_OBJ_HINT_PGI        0x1A20E
+#define GL_ALLOW_DRAW_WIN_HINT_PGI        0x1A20F
+#define GL_ALLOW_DRAW_FRG_HINT_PGI        0x1A210
+#define GL_ALLOW_DRAW_MEM_HINT_PGI        0x1A211
+#define GL_STRICT_DEPTHFUNC_HINT_PGI      0x1A216
+#define GL_STRICT_LIGHTING_HINT_PGI       0x1A217
+#define GL_STRICT_SCISSOR_HINT_PGI        0x1A218
+#define GL_FULL_STIPPLE_HINT_PGI          0x1A219
+#define GL_CLIP_NEAR_HINT_PGI             0x1A220
+#define GL_CLIP_FAR_HINT_PGI              0x1A221
+#define GL_WIDE_LINE_HINT_PGI             0x1A222
+#define GL_BACK_NORMALS_HINT_PGI          0x1A223
+typedef void (APIENTRYP PFNGLHINTPGIPROC) (GLenum target, GLint mode);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexBufferEXT (GLenum target, GLenum internalformat, GLuint buffer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXBUFFEREXTPROC) (GLenum target, GLenum internalformat, GLuint buffer);
+GLAPI void APIENTRY glHintPGI (GLenum target, GLint mode);
 #endif
+#endif /* GL_PGI_misc_hints */
 
-#ifndef GL_EXT_texture_compression_latc
-#define GL_EXT_texture_compression_latc 1
-#endif
+#ifndef GL_PGI_vertex_hints
+#define GL_PGI_vertex_hints 1
+#define GL_VERTEX_DATA_HINT_PGI           0x1A22A
+#define GL_VERTEX_CONSISTENT_HINT_PGI     0x1A22B
+#define GL_MATERIAL_SIDE_HINT_PGI         0x1A22C
+#define GL_MAX_VERTEX_HINT_PGI            0x1A22D
+#define GL_COLOR3_BIT_PGI                 0x00010000
+#define GL_COLOR4_BIT_PGI                 0x00020000
+#define GL_EDGEFLAG_BIT_PGI               0x00040000
+#define GL_INDEX_BIT_PGI                  0x00080000
+#define GL_MAT_AMBIENT_BIT_PGI            0x00100000
+#define GL_MAT_AMBIENT_AND_DIFFUSE_BIT_PGI 0x00200000
+#define GL_MAT_DIFFUSE_BIT_PGI            0x00400000
+#define GL_MAT_EMISSION_BIT_PGI           0x00800000
+#define GL_MAT_COLOR_INDEXES_BIT_PGI      0x01000000
+#define GL_MAT_SHININESS_BIT_PGI          0x02000000
+#define GL_MAT_SPECULAR_BIT_PGI           0x04000000
+#define GL_NORMAL_BIT_PGI                 0x08000000
+#define GL_TEXCOORD1_BIT_PGI              0x10000000
+#define GL_TEXCOORD2_BIT_PGI              0x20000000
+#define GL_TEXCOORD3_BIT_PGI              0x40000000
+#define GL_TEXCOORD4_BIT_PGI              0x80000000
+#define GL_VERTEX23_BIT_PGI               0x00000004
+#define GL_VERTEX4_BIT_PGI                0x00000008
+#endif /* GL_PGI_vertex_hints */
 
-#ifndef GL_EXT_texture_compression_rgtc
-#define GL_EXT_texture_compression_rgtc 1
-#endif
+#ifndef GL_REND_screen_coordinates
+#define GL_REND_screen_coordinates 1
+#define GL_SCREEN_COORDINATES_REND        0x8490
+#define GL_INVERTED_SCREEN_W_REND         0x8491
+#endif /* GL_REND_screen_coordinates */
 
-#ifndef GL_EXT_texture_shared_exponent
-#define GL_EXT_texture_shared_exponent 1
-#endif
+#ifndef GL_S3_s3tc
+#define GL_S3_s3tc 1
+#define GL_RGB_S3TC                       0x83A0
+#define GL_RGB4_S3TC                      0x83A1
+#define GL_RGBA_S3TC                      0x83A2
+#define GL_RGBA4_S3TC                     0x83A3
+#define GL_RGBA_DXT5_S3TC                 0x83A4
+#define GL_RGBA4_DXT5_S3TC                0x83A5
+#endif /* GL_S3_s3tc */
 
-#ifndef GL_NV_depth_buffer_float
-#define GL_NV_depth_buffer_float 1
+#ifndef GL_SGIS_detail_texture
+#define GL_SGIS_detail_texture 1
+#define GL_DETAIL_TEXTURE_2D_SGIS         0x8095
+#define GL_DETAIL_TEXTURE_2D_BINDING_SGIS 0x8096
+#define GL_LINEAR_DETAIL_SGIS             0x8097
+#define GL_LINEAR_DETAIL_ALPHA_SGIS       0x8098
+#define GL_LINEAR_DETAIL_COLOR_SGIS       0x8099
+#define GL_DETAIL_TEXTURE_LEVEL_SGIS      0x809A
+#define GL_DETAIL_TEXTURE_MODE_SGIS       0x809B
+#define GL_DETAIL_TEXTURE_FUNC_POINTS_SGIS 0x809C
+typedef void (APIENTRYP PFNGLDETAILTEXFUNCSGISPROC) (GLenum target, GLsizei n, const GLfloat *points);
+typedef void (APIENTRYP PFNGLGETDETAILTEXFUNCSGISPROC) (GLenum target, GLfloat *points);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDepthRangedNV (GLdouble zNear, GLdouble zFar);
-GLAPI void APIENTRY glClearDepthdNV (GLdouble depth);
-GLAPI void APIENTRY glDepthBoundsdNV (GLdouble zmin, GLdouble zmax);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEPTHRANGEDNVPROC) (GLdouble zNear, GLdouble zFar);
-typedef void (APIENTRYP PFNGLCLEARDEPTHDNVPROC) (GLdouble depth);
-typedef void (APIENTRYP PFNGLDEPTHBOUNDSDNVPROC) (GLdouble zmin, GLdouble zmax);
-#endif
-
-#ifndef GL_NV_fragment_program4
-#define GL_NV_fragment_program4 1
+GLAPI void APIENTRY glDetailTexFuncSGIS (GLenum target, GLsizei n, const GLfloat *points);
+GLAPI void APIENTRY glGetDetailTexFuncSGIS (GLenum target, GLfloat *points);
 #endif
+#endif /* GL_SGIS_detail_texture */
 
-#ifndef GL_NV_framebuffer_multisample_coverage
-#define GL_NV_framebuffer_multisample_coverage 1
+#ifndef GL_SGIS_fog_function
+#define GL_SGIS_fog_function 1
+#define GL_FOG_FUNC_SGIS                  0x812A
+#define GL_FOG_FUNC_POINTS_SGIS           0x812B
+#define GL_MAX_FOG_FUNC_POINTS_SGIS       0x812C
+typedef void (APIENTRYP PFNGLFOGFUNCSGISPROC) (GLsizei n, const GLfloat *points);
+typedef void (APIENTRYP PFNGLGETFOGFUNCSGISPROC) (GLfloat *points);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glRenderbufferStorageMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
-#endif
-
-#ifndef GL_EXT_framebuffer_sRGB
-#define GL_EXT_framebuffer_sRGB 1
+GLAPI void APIENTRY glFogFuncSGIS (GLsizei n, const GLfloat *points);
+GLAPI void APIENTRY glGetFogFuncSGIS (GLfloat *points);
 #endif
+#endif /* GL_SGIS_fog_function */
 
-#ifndef GL_NV_geometry_shader4
-#define GL_NV_geometry_shader4 1
-#endif
+#ifndef GL_SGIS_generate_mipmap
+#define GL_SGIS_generate_mipmap 1
+#define GL_GENERATE_MIPMAP_SGIS           0x8191
+#define GL_GENERATE_MIPMAP_HINT_SGIS      0x8192
+#endif /* GL_SGIS_generate_mipmap */
 
-#ifndef GL_NV_parameter_buffer_object
-#define GL_NV_parameter_buffer_object 1
+#ifndef GL_SGIS_multisample
+#define GL_SGIS_multisample 1
+#define GL_MULTISAMPLE_SGIS               0x809D
+#define GL_SAMPLE_ALPHA_TO_MASK_SGIS      0x809E
+#define GL_SAMPLE_ALPHA_TO_ONE_SGIS       0x809F
+#define GL_SAMPLE_MASK_SGIS               0x80A0
+#define GL_1PASS_SGIS                     0x80A1
+#define GL_2PASS_0_SGIS                   0x80A2
+#define GL_2PASS_1_SGIS                   0x80A3
+#define GL_4PASS_0_SGIS                   0x80A4
+#define GL_4PASS_1_SGIS                   0x80A5
+#define GL_4PASS_2_SGIS                   0x80A6
+#define GL_4PASS_3_SGIS                   0x80A7
+#define GL_SAMPLE_BUFFERS_SGIS            0x80A8
+#define GL_SAMPLES_SGIS                   0x80A9
+#define GL_SAMPLE_MASK_VALUE_SGIS         0x80AA
+#define GL_SAMPLE_MASK_INVERT_SGIS        0x80AB
+#define GL_SAMPLE_PATTERN_SGIS            0x80AC
+typedef void (APIENTRYP PFNGLSAMPLEMASKSGISPROC) (GLclampf value, GLboolean invert);
+typedef void (APIENTRYP PFNGLSAMPLEPATTERNSGISPROC) (GLenum pattern);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramBufferParametersfvNV (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLfloat *params);
-GLAPI void APIENTRY glProgramBufferParametersIivNV (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLint *params);
-GLAPI void APIENTRY glProgramBufferParametersIuivNV (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLuint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSFVNVPROC) (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLfloat *params);
-typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSIIVNVPROC) (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLint *params);
-typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSIUIVNVPROC) (GLenum target, GLuint bindingIndex, GLuint wordIndex, GLsizei count, const GLuint *params);
+GLAPI void APIENTRY glSampleMaskSGIS (GLclampf value, GLboolean invert);
+GLAPI void APIENTRY glSamplePatternSGIS (GLenum pattern);
 #endif
+#endif /* GL_SGIS_multisample */
 
-#ifndef GL_EXT_draw_buffers2
-#define GL_EXT_draw_buffers2 1
+#ifndef GL_SGIS_pixel_texture
+#define GL_SGIS_pixel_texture 1
+#define GL_PIXEL_TEXTURE_SGIS             0x8353
+#define GL_PIXEL_FRAGMENT_RGB_SOURCE_SGIS 0x8354
+#define GL_PIXEL_FRAGMENT_ALPHA_SOURCE_SGIS 0x8355
+#define GL_PIXEL_GROUP_COLOR_SGIS         0x8356
+typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERISGISPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERIVSGISPROC) (GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERFSGISPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERFVSGISPROC) (GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLGETPIXELTEXGENPARAMETERIVSGISPROC) (GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETPIXELTEXGENPARAMETERFVSGISPROC) (GLenum pname, GLfloat *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glColorMaskIndexedEXT (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
-GLAPI void APIENTRY glGetBooleanIndexedvEXT (GLenum target, GLuint index, GLboolean *data);
-GLAPI void APIENTRY glGetIntegerIndexedvEXT (GLenum target, GLuint index, GLint *data);
-GLAPI void APIENTRY glEnableIndexedEXT (GLenum target, GLuint index);
-GLAPI void APIENTRY glDisableIndexedEXT (GLenum target, GLuint index);
-GLAPI GLboolean APIENTRY glIsEnabledIndexedEXT (GLenum target, GLuint index);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOLORMASKINDEXEDEXTPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a);
-typedef void (APIENTRYP PFNGLGETBOOLEANINDEXEDVEXTPROC) (GLenum target, GLuint index, GLboolean *data);
-typedef void (APIENTRYP PFNGLGETINTEGERINDEXEDVEXTPROC) (GLenum target, GLuint index, GLint *data);
-typedef void (APIENTRYP PFNGLENABLEINDEXEDEXTPROC) (GLenum target, GLuint index);
-typedef void (APIENTRYP PFNGLDISABLEINDEXEDEXTPROC) (GLenum target, GLuint index);
-typedef GLboolean (APIENTRYP PFNGLISENABLEDINDEXEDEXTPROC) (GLenum target, GLuint index);
+GLAPI void APIENTRY glPixelTexGenParameteriSGIS (GLenum pname, GLint param);
+GLAPI void APIENTRY glPixelTexGenParameterivSGIS (GLenum pname, const GLint *params);
+GLAPI void APIENTRY glPixelTexGenParameterfSGIS (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glPixelTexGenParameterfvSGIS (GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glGetPixelTexGenParameterivSGIS (GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetPixelTexGenParameterfvSGIS (GLenum pname, GLfloat *params);
 #endif
+#endif /* GL_SGIS_pixel_texture */
 
-#ifndef GL_NV_transform_feedback
-#define GL_NV_transform_feedback 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBeginTransformFeedbackNV (GLenum primitiveMode);
-GLAPI void APIENTRY glEndTransformFeedbackNV (void);
-GLAPI void APIENTRY glTransformFeedbackAttribsNV (GLuint count, const GLint *attribs, GLenum bufferMode);
-GLAPI void APIENTRY glBindBufferRangeNV (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
-GLAPI void APIENTRY glBindBufferOffsetNV (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
-GLAPI void APIENTRY glBindBufferBaseNV (GLenum target, GLuint index, GLuint buffer);
-GLAPI void APIENTRY glTransformFeedbackVaryingsNV (GLuint program, GLsizei count, const GLint *locations, GLenum bufferMode);
-GLAPI void APIENTRY glActiveVaryingNV (GLuint program, const GLchar *name);
-GLAPI GLint APIENTRY glGetVaryingLocationNV (GLuint program, const GLchar *name);
-GLAPI void APIENTRY glGetActiveVaryingNV (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
-GLAPI void APIENTRY glGetTransformFeedbackVaryingNV (GLuint program, GLuint index, GLint *location);
-GLAPI void APIENTRY glTransformFeedbackStreamAttribsNV (GLsizei count, const GLint *attribs, GLsizei nbuffers, const GLint *bufstreams, GLenum bufferMode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKNVPROC) (GLenum primitiveMode);
-typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKNVPROC) (void);
-typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKATTRIBSNVPROC) (GLuint count, const GLint *attribs, GLenum bufferMode);
-typedef void (APIENTRYP PFNGLBINDBUFFERRANGENVPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
-typedef void (APIENTRYP PFNGLBINDBUFFEROFFSETNVPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
-typedef void (APIENTRYP PFNGLBINDBUFFERBASENVPROC) (GLenum target, GLuint index, GLuint buffer);
-typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSNVPROC) (GLuint program, GLsizei count, const GLint *locations, GLenum bufferMode);
-typedef void (APIENTRYP PFNGLACTIVEVARYINGNVPROC) (GLuint program, const GLchar *name);
-typedef GLint (APIENTRYP PFNGLGETVARYINGLOCATIONNVPROC) (GLuint program, const GLchar *name);
-typedef void (APIENTRYP PFNGLGETACTIVEVARYINGNVPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
-typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGNVPROC) (GLuint program, GLuint index, GLint *location);
-typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKSTREAMATTRIBSNVPROC) (GLsizei count, const GLint *attribs, GLsizei nbuffers, const GLint *bufstreams, GLenum bufferMode);
-#endif
+#ifndef GL_SGIS_point_line_texgen
+#define GL_SGIS_point_line_texgen 1
+#define GL_EYE_DISTANCE_TO_POINT_SGIS     0x81F0
+#define GL_OBJECT_DISTANCE_TO_POINT_SGIS  0x81F1
+#define GL_EYE_DISTANCE_TO_LINE_SGIS      0x81F2
+#define GL_OBJECT_DISTANCE_TO_LINE_SGIS   0x81F3
+#define GL_EYE_POINT_SGIS                 0x81F4
+#define GL_OBJECT_POINT_SGIS              0x81F5
+#define GL_EYE_LINE_SGIS                  0x81F6
+#define GL_OBJECT_LINE_SGIS               0x81F7
+#endif /* GL_SGIS_point_line_texgen */
 
-#ifndef GL_EXT_bindable_uniform
-#define GL_EXT_bindable_uniform 1
+#ifndef GL_SGIS_point_parameters
+#define GL_SGIS_point_parameters 1
+#define GL_POINT_SIZE_MIN_SGIS            0x8126
+#define GL_POINT_SIZE_MAX_SGIS            0x8127
+#define GL_POINT_FADE_THRESHOLD_SIZE_SGIS 0x8128
+#define GL_DISTANCE_ATTENUATION_SGIS      0x8129
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFSGISPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLPOINTPARAMETERFVSGISPROC) (GLenum pname, const GLfloat *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glUniformBufferEXT (GLuint program, GLint location, GLuint buffer);
-GLAPI GLint APIENTRY glGetUniformBufferSizeEXT (GLuint program, GLint location);
-GLAPI GLintptr APIENTRY glGetUniformOffsetEXT (GLuint program, GLint location);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLUNIFORMBUFFEREXTPROC) (GLuint program, GLint location, GLuint buffer);
-typedef GLint (APIENTRYP PFNGLGETUNIFORMBUFFERSIZEEXTPROC) (GLuint program, GLint location);
-typedef GLintptr (APIENTRYP PFNGLGETUNIFORMOFFSETEXTPROC) (GLuint program, GLint location);
+GLAPI void APIENTRY glPointParameterfSGIS (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glPointParameterfvSGIS (GLenum pname, const GLfloat *params);
 #endif
+#endif /* GL_SGIS_point_parameters */
 
-#ifndef GL_EXT_texture_integer
-#define GL_EXT_texture_integer 1
+#ifndef GL_SGIS_sharpen_texture
+#define GL_SGIS_sharpen_texture 1
+#define GL_LINEAR_SHARPEN_SGIS            0x80AD
+#define GL_LINEAR_SHARPEN_ALPHA_SGIS      0x80AE
+#define GL_LINEAR_SHARPEN_COLOR_SGIS      0x80AF
+#define GL_SHARPEN_TEXTURE_FUNC_POINTS_SGIS 0x80B0
+typedef void (APIENTRYP PFNGLSHARPENTEXFUNCSGISPROC) (GLenum target, GLsizei n, const GLfloat *points);
+typedef void (APIENTRYP PFNGLGETSHARPENTEXFUNCSGISPROC) (GLenum target, GLfloat *points);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexParameterIivEXT (GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glTexParameterIuivEXT (GLenum target, GLenum pname, const GLuint *params);
-GLAPI void APIENTRY glGetTexParameterIivEXT (GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetTexParameterIuivEXT (GLenum target, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glClearColorIiEXT (GLint red, GLint green, GLint blue, GLint alpha);
-GLAPI void APIENTRY glClearColorIuiEXT (GLuint red, GLuint green, GLuint blue, GLuint alpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLCLEARCOLORIIEXTPROC) (GLint red, GLint green, GLint blue, GLint alpha);
-typedef void (APIENTRYP PFNGLCLEARCOLORIUIEXTPROC) (GLuint red, GLuint green, GLuint blue, GLuint alpha);
+GLAPI void APIENTRY glSharpenTexFuncSGIS (GLenum target, GLsizei n, const GLfloat *points);
+GLAPI void APIENTRY glGetSharpenTexFuncSGIS (GLenum target, GLfloat *points);
 #endif
+#endif /* GL_SGIS_sharpen_texture */
 
-#ifndef GL_GREMEDY_frame_terminator
-#define GL_GREMEDY_frame_terminator 1
+#ifndef GL_SGIS_texture4D
+#define GL_SGIS_texture4D 1
+#define GL_PACK_SKIP_VOLUMES_SGIS         0x8130
+#define GL_PACK_IMAGE_DEPTH_SGIS          0x8131
+#define GL_UNPACK_SKIP_VOLUMES_SGIS       0x8132
+#define GL_UNPACK_IMAGE_DEPTH_SGIS        0x8133
+#define GL_TEXTURE_4D_SGIS                0x8134
+#define GL_PROXY_TEXTURE_4D_SGIS          0x8135
+#define GL_TEXTURE_4DSIZE_SGIS            0x8136
+#define GL_TEXTURE_WRAP_Q_SGIS            0x8137
+#define GL_MAX_4D_TEXTURE_SIZE_SGIS       0x8138
+#define GL_TEXTURE_4D_BINDING_SGIS        0x814F
+typedef void (APIENTRYP PFNGLTEXIMAGE4DSGISPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLint border, GLenum format, GLenum type, const void *pixels);
+typedef void (APIENTRYP PFNGLTEXSUBIMAGE4DSGISPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint woffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLenum format, GLenum type, const void *pixels);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glFrameTerminatorGREMEDY (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLFRAMETERMINATORGREMEDYPROC) (void);
+GLAPI void APIENTRY glTexImage4DSGIS (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLint border, GLenum format, GLenum type, const void *pixels);
+GLAPI void APIENTRY glTexSubImage4DSGIS (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint woffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLenum format, GLenum type, const void *pixels);
 #endif
+#endif /* GL_SGIS_texture4D */
 
-#ifndef GL_NV_conditional_render
-#define GL_NV_conditional_render 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBeginConditionalRenderNV (GLuint id, GLenum mode);
-GLAPI void APIENTRY glEndConditionalRenderNV (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERNVPROC) (GLuint id, GLenum mode);
-typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERNVPROC) (void);
-#endif
+#ifndef GL_SGIS_texture_border_clamp
+#define GL_SGIS_texture_border_clamp 1
+#define GL_CLAMP_TO_BORDER_SGIS           0x812D
+#endif /* GL_SGIS_texture_border_clamp */
 
-#ifndef GL_NV_present_video
-#define GL_NV_present_video 1
+#ifndef GL_SGIS_texture_color_mask
+#define GL_SGIS_texture_color_mask 1
+#define GL_TEXTURE_COLOR_WRITEMASK_SGIS   0x81EF
+typedef void (APIENTRYP PFNGLTEXTURECOLORMASKSGISPROC) (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glPresentFrameKeyedNV (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLuint key0, GLenum target1, GLuint fill1, GLuint key1);
-GLAPI void APIENTRY glPresentFrameDualFillNV (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLenum target1, GLuint fill1, GLenum target2, GLuint fill2, GLenum target3, GLuint fill3);
-GLAPI void APIENTRY glGetVideoivNV (GLuint video_slot, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVideouivNV (GLuint video_slot, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glGetVideoi64vNV (GLuint video_slot, GLenum pname, GLint64EXT *params);
-GLAPI void APIENTRY glGetVideoui64vNV (GLuint video_slot, GLenum pname, GLuint64EXT *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPRESENTFRAMEKEYEDNVPROC) (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLuint key0, GLenum target1, GLuint fill1, GLuint key1);
-typedef void (APIENTRYP PFNGLPRESENTFRAMEDUALFILLNVPROC) (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLenum target1, GLuint fill1, GLenum target2, GLuint fill2, GLenum target3, GLuint fill3);
-typedef void (APIENTRYP PFNGLGETVIDEOIVNVPROC) (GLuint video_slot, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVIDEOUIVNVPROC) (GLuint video_slot, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLGETVIDEOI64VNVPROC) (GLuint video_slot, GLenum pname, GLint64EXT *params);
-typedef void (APIENTRYP PFNGLGETVIDEOUI64VNVPROC) (GLuint video_slot, GLenum pname, GLuint64EXT *params);
+GLAPI void APIENTRY glTextureColorMaskSGIS (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
 #endif
+#endif /* GL_SGIS_texture_color_mask */
 
-#ifndef GL_EXT_transform_feedback
-#define GL_EXT_transform_feedback 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBeginTransformFeedbackEXT (GLenum primitiveMode);
-GLAPI void APIENTRY glEndTransformFeedbackEXT (void);
-GLAPI void APIENTRY glBindBufferRangeEXT (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
-GLAPI void APIENTRY glBindBufferOffsetEXT (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
-GLAPI void APIENTRY glBindBufferBaseEXT (GLenum target, GLuint index, GLuint buffer);
-GLAPI void APIENTRY glTransformFeedbackVaryingsEXT (GLuint program, GLsizei count, const GLchar* *varyings, GLenum bufferMode);
-GLAPI void APIENTRY glGetTransformFeedbackVaryingEXT (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKEXTPROC) (GLenum primitiveMode);
-typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKEXTPROC) (void);
-typedef void (APIENTRYP PFNGLBINDBUFFERRANGEEXTPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size);
-typedef void (APIENTRYP PFNGLBINDBUFFEROFFSETEXTPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset);
-typedef void (APIENTRYP PFNGLBINDBUFFERBASEEXTPROC) (GLenum target, GLuint index, GLuint buffer);
-typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSEXTPROC) (GLuint program, GLsizei count, const GLchar* *varyings, GLenum bufferMode);
-typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGEXTPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name);
-#endif
+#ifndef GL_SGIS_texture_edge_clamp
+#define GL_SGIS_texture_edge_clamp 1
+#define GL_CLAMP_TO_EDGE_SGIS             0x812F
+#endif /* GL_SGIS_texture_edge_clamp */
 
-#ifndef GL_EXT_direct_state_access
-#define GL_EXT_direct_state_access 1
+#ifndef GL_SGIS_texture_filter4
+#define GL_SGIS_texture_filter4 1
+#define GL_FILTER4_SGIS                   0x8146
+#define GL_TEXTURE_FILTER4_SIZE_SGIS      0x8147
+typedef void (APIENTRYP PFNGLGETTEXFILTERFUNCSGISPROC) (GLenum target, GLenum filter, GLfloat *weights);
+typedef void (APIENTRYP PFNGLTEXFILTERFUNCSGISPROC) (GLenum target, GLenum filter, GLsizei n, const GLfloat *weights);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glClientAttribDefaultEXT (GLbitfield mask);
-GLAPI void APIENTRY glPushClientAttribDefaultEXT (GLbitfield mask);
-GLAPI void APIENTRY glMatrixLoadfEXT (GLenum mode, const GLfloat *m);
-GLAPI void APIENTRY glMatrixLoaddEXT (GLenum mode, const GLdouble *m);
-GLAPI void APIENTRY glMatrixMultfEXT (GLenum mode, const GLfloat *m);
-GLAPI void APIENTRY glMatrixMultdEXT (GLenum mode, const GLdouble *m);
-GLAPI void APIENTRY glMatrixLoadIdentityEXT (GLenum mode);
-GLAPI void APIENTRY glMatrixRotatefEXT (GLenum mode, GLfloat angle, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glMatrixRotatedEXT (GLenum mode, GLdouble angle, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glMatrixScalefEXT (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glMatrixScaledEXT (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glMatrixTranslatefEXT (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
-GLAPI void APIENTRY glMatrixTranslatedEXT (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glMatrixFrustumEXT (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
-GLAPI void APIENTRY glMatrixOrthoEXT (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
-GLAPI void APIENTRY glMatrixPopEXT (GLenum mode);
-GLAPI void APIENTRY glMatrixPushEXT (GLenum mode);
-GLAPI void APIENTRY glMatrixLoadTransposefEXT (GLenum mode, const GLfloat *m);
-GLAPI void APIENTRY glMatrixLoadTransposedEXT (GLenum mode, const GLdouble *m);
-GLAPI void APIENTRY glMatrixMultTransposefEXT (GLenum mode, const GLfloat *m);
-GLAPI void APIENTRY glMatrixMultTransposedEXT (GLenum mode, const GLdouble *m);
-GLAPI void APIENTRY glTextureParameterfEXT (GLuint texture, GLenum target, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glTextureParameterfvEXT (GLuint texture, GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glTextureParameteriEXT (GLuint texture, GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glTextureParameterivEXT (GLuint texture, GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glCopyTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
-GLAPI void APIENTRY glCopyTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
-GLAPI void APIENTRY glCopyTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glCopyTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetTextureImageEXT (GLuint texture, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels);
-GLAPI void APIENTRY glGetTextureParameterfvEXT (GLuint texture, GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetTextureParameterivEXT (GLuint texture, GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetTextureLevelParameterfvEXT (GLuint texture, GLenum target, GLint level, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetTextureLevelParameterivEXT (GLuint texture, GLenum target, GLint level, GLenum pname, GLint *params);
-GLAPI void APIENTRY glTextureImage3DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glCopyTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glMultiTexParameterfEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glMultiTexParameterfvEXT (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glMultiTexParameteriEXT (GLenum texunit, GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glMultiTexParameterivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glCopyMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
-GLAPI void APIENTRY glCopyMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
-GLAPI void APIENTRY glCopyMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
-GLAPI void APIENTRY glCopyMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetMultiTexImageEXT (GLenum texunit, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels);
-GLAPI void APIENTRY glGetMultiTexParameterfvEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMultiTexParameterivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMultiTexLevelParameterfvEXT (GLenum texunit, GLenum target, GLint level, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMultiTexLevelParameterivEXT (GLenum texunit, GLenum target, GLint level, GLenum pname, GLint *params);
-GLAPI void APIENTRY glMultiTexImage3DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-GLAPI void APIENTRY glCopyMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glBindMultiTextureEXT (GLenum texunit, GLenum target, GLuint texture);
-GLAPI void APIENTRY glEnableClientStateIndexedEXT (GLenum array, GLuint index);
-GLAPI void APIENTRY glDisableClientStateIndexedEXT (GLenum array, GLuint index);
-GLAPI void APIENTRY glMultiTexCoordPointerEXT (GLenum texunit, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glMultiTexEnvfEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glMultiTexEnvfvEXT (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glMultiTexEnviEXT (GLenum texunit, GLenum target, GLenum pname, GLint param);
-GLAPI void APIENTRY glMultiTexEnvivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glMultiTexGendEXT (GLenum texunit, GLenum coord, GLenum pname, GLdouble param);
-GLAPI void APIENTRY glMultiTexGendvEXT (GLenum texunit, GLenum coord, GLenum pname, const GLdouble *params);
-GLAPI void APIENTRY glMultiTexGenfEXT (GLenum texunit, GLenum coord, GLenum pname, GLfloat param);
-GLAPI void APIENTRY glMultiTexGenfvEXT (GLenum texunit, GLenum coord, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glMultiTexGeniEXT (GLenum texunit, GLenum coord, GLenum pname, GLint param);
-GLAPI void APIENTRY glMultiTexGenivEXT (GLenum texunit, GLenum coord, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glGetMultiTexEnvfvEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMultiTexEnvivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMultiTexGendvEXT (GLenum texunit, GLenum coord, GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glGetMultiTexGenfvEXT (GLenum texunit, GLenum coord, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetMultiTexGenivEXT (GLenum texunit, GLenum coord, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetFloatIndexedvEXT (GLenum target, GLuint index, GLfloat *data);
-GLAPI void APIENTRY glGetDoubleIndexedvEXT (GLenum target, GLuint index, GLdouble *data);
-GLAPI void APIENTRY glGetPointerIndexedvEXT (GLenum target, GLuint index, GLvoid* *data);
-GLAPI void APIENTRY glCompressedTextureImage3DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glGetCompressedTextureImageEXT (GLuint texture, GLenum target, GLint lod, GLvoid *img);
-GLAPI void APIENTRY glCompressedMultiTexImage3DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glCompressedMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits);
-GLAPI void APIENTRY glGetCompressedMultiTexImageEXT (GLenum texunit, GLenum target, GLint lod, GLvoid *img);
-GLAPI void APIENTRY glNamedProgramStringEXT (GLuint program, GLenum target, GLenum format, GLsizei len, const GLvoid *string);
-GLAPI void APIENTRY glNamedProgramLocalParameter4dEXT (GLuint program, GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glNamedProgramLocalParameter4dvEXT (GLuint program, GLenum target, GLuint index, const GLdouble *params);
-GLAPI void APIENTRY glNamedProgramLocalParameter4fEXT (GLuint program, GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-GLAPI void APIENTRY glNamedProgramLocalParameter4fvEXT (GLuint program, GLenum target, GLuint index, const GLfloat *params);
-GLAPI void APIENTRY glGetNamedProgramLocalParameterdvEXT (GLuint program, GLenum target, GLuint index, GLdouble *params);
-GLAPI void APIENTRY glGetNamedProgramLocalParameterfvEXT (GLuint program, GLenum target, GLuint index, GLfloat *params);
-GLAPI void APIENTRY glGetNamedProgramivEXT (GLuint program, GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetNamedProgramStringEXT (GLuint program, GLenum target, GLenum pname, GLvoid *string);
-GLAPI void APIENTRY glNamedProgramLocalParameters4fvEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLfloat *params);
-GLAPI void APIENTRY glNamedProgramLocalParameterI4iEXT (GLuint program, GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
-GLAPI void APIENTRY glNamedProgramLocalParameterI4ivEXT (GLuint program, GLenum target, GLuint index, const GLint *params);
-GLAPI void APIENTRY glNamedProgramLocalParametersI4ivEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLint *params);
-GLAPI void APIENTRY glNamedProgramLocalParameterI4uiEXT (GLuint program, GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-GLAPI void APIENTRY glNamedProgramLocalParameterI4uivEXT (GLuint program, GLenum target, GLuint index, const GLuint *params);
-GLAPI void APIENTRY glNamedProgramLocalParametersI4uivEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLuint *params);
-GLAPI void APIENTRY glGetNamedProgramLocalParameterIivEXT (GLuint program, GLenum target, GLuint index, GLint *params);
-GLAPI void APIENTRY glGetNamedProgramLocalParameterIuivEXT (GLuint program, GLenum target, GLuint index, GLuint *params);
-GLAPI void APIENTRY glTextureParameterIivEXT (GLuint texture, GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glTextureParameterIuivEXT (GLuint texture, GLenum target, GLenum pname, const GLuint *params);
-GLAPI void APIENTRY glGetTextureParameterIivEXT (GLuint texture, GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetTextureParameterIuivEXT (GLuint texture, GLenum target, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glMultiTexParameterIivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glMultiTexParameterIuivEXT (GLenum texunit, GLenum target, GLenum pname, const GLuint *params);
-GLAPI void APIENTRY glGetMultiTexParameterIivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetMultiTexParameterIuivEXT (GLenum texunit, GLenum target, GLenum pname, GLuint *params);
-GLAPI void APIENTRY glProgramUniform1fEXT (GLuint program, GLint location, GLfloat v0);
-GLAPI void APIENTRY glProgramUniform2fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1);
-GLAPI void APIENTRY glProgramUniform3fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-GLAPI void APIENTRY glProgramUniform4fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-GLAPI void APIENTRY glProgramUniform1iEXT (GLuint program, GLint location, GLint v0);
-GLAPI void APIENTRY glProgramUniform2iEXT (GLuint program, GLint location, GLint v0, GLint v1);
-GLAPI void APIENTRY glProgramUniform3iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
-GLAPI void APIENTRY glProgramUniform4iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-GLAPI void APIENTRY glProgramUniform1fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform2fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform3fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform4fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform1ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform2ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform3ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniform4ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value);
-GLAPI void APIENTRY glProgramUniformMatrix2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-GLAPI void APIENTRY glProgramUniform1uiEXT (GLuint program, GLint location, GLuint v0);
-GLAPI void APIENTRY glProgramUniform2uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1);
-GLAPI void APIENTRY glProgramUniform3uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
-GLAPI void APIENTRY glProgramUniform4uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-GLAPI void APIENTRY glProgramUniform1uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniform2uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniform3uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glProgramUniform4uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value);
-GLAPI void APIENTRY glNamedBufferDataEXT (GLuint buffer, GLsizeiptr size, const GLvoid *data, GLenum usage);
-GLAPI void APIENTRY glNamedBufferSubDataEXT (GLuint buffer, GLintptr offset, GLsizeiptr size, const GLvoid *data);
-GLAPI GLvoid* APIENTRY glMapNamedBufferEXT (GLuint buffer, GLenum access);
-GLAPI GLboolean APIENTRY glUnmapNamedBufferEXT (GLuint buffer);
-GLAPI GLvoid* APIENTRY glMapNamedBufferRangeEXT (GLuint buffer, GLintptr offset, GLsizeiptr length, GLbitfield access);
-GLAPI void APIENTRY glFlushMappedNamedBufferRangeEXT (GLuint buffer, GLintptr offset, GLsizeiptr length);
-GLAPI void APIENTRY glNamedCopyBufferSubDataEXT (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
-GLAPI void APIENTRY glGetNamedBufferParameterivEXT (GLuint buffer, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetNamedBufferPointervEXT (GLuint buffer, GLenum pname, GLvoid* *params);
-GLAPI void APIENTRY glGetNamedBufferSubDataEXT (GLuint buffer, GLintptr offset, GLsizeiptr size, GLvoid *data);
-GLAPI void APIENTRY glTextureBufferEXT (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer);
-GLAPI void APIENTRY glMultiTexBufferEXT (GLenum texunit, GLenum target, GLenum internalformat, GLuint buffer);
-GLAPI void APIENTRY glNamedRenderbufferStorageEXT (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glGetNamedRenderbufferParameterivEXT (GLuint renderbuffer, GLenum pname, GLint *params);
-GLAPI GLenum APIENTRY glCheckNamedFramebufferStatusEXT (GLuint framebuffer, GLenum target);
-GLAPI void APIENTRY glNamedFramebufferTexture1DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-GLAPI void APIENTRY glNamedFramebufferTexture2DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-GLAPI void APIENTRY glNamedFramebufferTexture3DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-GLAPI void APIENTRY glNamedFramebufferRenderbufferEXT (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
-GLAPI void APIENTRY glGetNamedFramebufferAttachmentParameterivEXT (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGenerateTextureMipmapEXT (GLuint texture, GLenum target);
-GLAPI void APIENTRY glGenerateMultiTexMipmapEXT (GLenum texunit, GLenum target);
-GLAPI void APIENTRY glFramebufferDrawBufferEXT (GLuint framebuffer, GLenum mode);
-GLAPI void APIENTRY glFramebufferDrawBuffersEXT (GLuint framebuffer, GLsizei n, const GLenum *bufs);
-GLAPI void APIENTRY glFramebufferReadBufferEXT (GLuint framebuffer, GLenum mode);
-GLAPI void APIENTRY glGetFramebufferParameterivEXT (GLuint framebuffer, GLenum pname, GLint *params);
-GLAPI void APIENTRY glNamedRenderbufferStorageMultisampleEXT (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glNamedRenderbufferStorageMultisampleCoverageEXT (GLuint renderbuffer, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
-GLAPI void APIENTRY glNamedFramebufferTextureEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level);
-GLAPI void APIENTRY glNamedFramebufferTextureLayerEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer);
-GLAPI void APIENTRY glNamedFramebufferTextureFaceEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLenum face);
-GLAPI void APIENTRY glTextureRenderbufferEXT (GLuint texture, GLenum target, GLuint renderbuffer);
-GLAPI void APIENTRY glMultiTexRenderbufferEXT (GLenum texunit, GLenum target, GLuint renderbuffer);
-GLAPI void APIENTRY glProgramUniform1dEXT (GLuint program, GLint location, GLdouble x);
-GLAPI void APIENTRY glProgramUniform2dEXT (GLuint program, GLint location, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glProgramUniform3dEXT (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glProgramUniform4dEXT (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glProgramUniform1dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform2dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform3dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniform4dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix2x4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix3x4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-GLAPI void APIENTRY glProgramUniformMatrix4x3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCLIENTATTRIBDEFAULTEXTPROC) (GLbitfield mask);
-typedef void (APIENTRYP PFNGLPUSHCLIENTATTRIBDEFAULTEXTPROC) (GLbitfield mask);
-typedef void (APIENTRYP PFNGLMATRIXLOADFEXTPROC) (GLenum mode, const GLfloat *m);
-typedef void (APIENTRYP PFNGLMATRIXLOADDEXTPROC) (GLenum mode, const GLdouble *m);
-typedef void (APIENTRYP PFNGLMATRIXMULTFEXTPROC) (GLenum mode, const GLfloat *m);
-typedef void (APIENTRYP PFNGLMATRIXMULTDEXTPROC) (GLenum mode, const GLdouble *m);
-typedef void (APIENTRYP PFNGLMATRIXLOADIDENTITYEXTPROC) (GLenum mode);
-typedef void (APIENTRYP PFNGLMATRIXROTATEFEXTPROC) (GLenum mode, GLfloat angle, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLMATRIXROTATEDEXTPROC) (GLenum mode, GLdouble angle, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLMATRIXSCALEFEXTPROC) (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLMATRIXSCALEDEXTPROC) (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLMATRIXTRANSLATEFEXTPROC) (GLenum mode, GLfloat x, GLfloat y, GLfloat z);
-typedef void (APIENTRYP PFNGLMATRIXTRANSLATEDEXTPROC) (GLenum mode, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLMATRIXFRUSTUMEXTPROC) (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
-typedef void (APIENTRYP PFNGLMATRIXORTHOEXTPROC) (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar);
-typedef void (APIENTRYP PFNGLMATRIXPOPEXTPROC) (GLenum mode);
-typedef void (APIENTRYP PFNGLMATRIXPUSHEXTPROC) (GLenum mode);
-typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSEFEXTPROC) (GLenum mode, const GLfloat *m);
-typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSEDEXTPROC) (GLenum mode, const GLdouble *m);
-typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSEFEXTPROC) (GLenum mode, const GLfloat *m);
-typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSEDEXTPROC) (GLenum mode, const GLdouble *m);
-typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLCOPYTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
-typedef void (APIENTRYP PFNGLCOPYTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
-typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETTEXTUREIMAGEEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels);
-typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLMULTITEXPARAMETERFEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLMULTITEXPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLCOPYMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border);
-typedef void (APIENTRYP PFNGLCOPYMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
-typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width);
-typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETMULTITEXIMAGEEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels);
-typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXLEVELPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXLEVELPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLMULTITEXIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels);
-typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLBINDMULTITEXTUREEXTPROC) (GLenum texunit, GLenum target, GLuint texture);
-typedef void (APIENTRYP PFNGLENABLECLIENTSTATEINDEXEDEXTPROC) (GLenum array, GLuint index);
-typedef void (APIENTRYP PFNGLDISABLECLIENTSTATEINDEXEDEXTPROC) (GLenum array, GLuint index);
-typedef void (APIENTRYP PFNGLMULTITEXCOORDPOINTEREXTPROC) (GLenum texunit, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLMULTITEXENVFEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLMULTITEXENVFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLMULTITEXENVIEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLMULTITEXENVIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLMULTITEXGENDEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLdouble param);
-typedef void (APIENTRYP PFNGLMULTITEXGENDVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLdouble *params);
-typedef void (APIENTRYP PFNGLMULTITEXGENFEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLfloat param);
-typedef void (APIENTRYP PFNGLMULTITEXGENFVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLMULTITEXGENIEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLint param);
-typedef void (APIENTRYP PFNGLMULTITEXGENIVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXENVFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXENVIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXGENDVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLdouble *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXGENFVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXGENIVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETFLOATINDEXEDVEXTPROC) (GLenum target, GLuint index, GLfloat *data);
-typedef void (APIENTRYP PFNGLGETDOUBLEINDEXEDVEXTPROC) (GLenum target, GLuint index, GLdouble *data);
-typedef void (APIENTRYP PFNGLGETPOINTERINDEXEDVEXTPROC) (GLenum target, GLuint index, GLvoid* *data);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXTUREIMAGEEXTPROC) (GLuint texture, GLenum target, GLint lod, GLvoid *img);
-typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits);
-typedef void (APIENTRYP PFNGLGETCOMPRESSEDMULTITEXIMAGEEXTPROC) (GLenum texunit, GLenum target, GLint lod, GLvoid *img);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMSTRINGEXTPROC) (GLuint program, GLenum target, GLenum format, GLsizei len, const GLvoid *string);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4DEXTPROC) (GLuint program, GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4DVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLdouble *params);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4FEXTPROC) (GLuint program, GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4FVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLfloat *params);
-typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERDVEXTPROC) (GLuint program, GLenum target, GLuint index, GLdouble *params);
-typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERFVEXTPROC) (GLuint program, GLenum target, GLuint index, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMIVEXTPROC) (GLuint program, GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMSTRINGEXTPROC) (GLuint program, GLenum target, GLenum pname, GLvoid *string);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERS4FVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLfloat *params);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4IEXTPROC) (GLuint program, GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4IVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLint *params);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERSI4IVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLint *params);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4UIEXTPROC) (GLuint program, GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4UIVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLuint *params);
-typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERSI4UIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERIIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLint *params);
-typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERIUIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLuint *params);
-typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIUIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIUIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIUIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIUIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLuint *params);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FEXTPROC) (GLuint program, GLint location, GLfloat v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IEXTPROC) (GLuint program, GLint location, GLint v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIEXTPROC) (GLuint program, GLint location, GLuint v0);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value);
-typedef void (APIENTRYP PFNGLNAMEDBUFFERDATAEXTPROC) (GLuint buffer, GLsizeiptr size, const GLvoid *data, GLenum usage);
-typedef void (APIENTRYP PFNGLNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr size, const GLvoid *data);
-typedef GLvoid* (APIENTRYP PFNGLMAPNAMEDBUFFEREXTPROC) (GLuint buffer, GLenum access);
-typedef GLboolean (APIENTRYP PFNGLUNMAPNAMEDBUFFEREXTPROC) (GLuint buffer);
-typedef GLvoid* (APIENTRYP PFNGLMAPNAMEDBUFFERRANGEEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length, GLbitfield access);
-typedef void (APIENTRYP PFNGLFLUSHMAPPEDNAMEDBUFFERRANGEEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length);
-typedef void (APIENTRYP PFNGLNAMEDCOPYBUFFERSUBDATAEXTPROC) (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size);
-typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERIVEXTPROC) (GLuint buffer, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPOINTERVEXTPROC) (GLuint buffer, GLenum pname, GLvoid* *params);
-typedef void (APIENTRYP PFNGLGETNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr size, GLvoid *data);
-typedef void (APIENTRYP PFNGLTEXTUREBUFFEREXTPROC) (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer);
-typedef void (APIENTRYP PFNGLMULTITEXBUFFEREXTPROC) (GLenum texunit, GLenum target, GLenum internalformat, GLuint buffer);
-typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEEXTPROC) (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLGETNAMEDRENDERBUFFERPARAMETERIVEXTPROC) (GLuint renderbuffer, GLenum pname, GLint *params);
-typedef GLenum (APIENTRYP PFNGLCHECKNAMEDFRAMEBUFFERSTATUSEXTPROC) (GLuint framebuffer, GLenum target);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE1DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE2DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE3DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERRENDERBUFFEREXTPROC) (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERATTACHMENTPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGENERATETEXTUREMIPMAPEXTPROC) (GLuint texture, GLenum target);
-typedef void (APIENTRYP PFNGLGENERATEMULTITEXMIPMAPEXTPROC) (GLenum texunit, GLenum target);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERDRAWBUFFEREXTPROC) (GLuint framebuffer, GLenum mode);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERDRAWBUFFERSEXTPROC) (GLuint framebuffer, GLsizei n, const GLenum *bufs);
-typedef void (APIENTRYP PFNGLFRAMEBUFFERREADBUFFEREXTPROC) (GLuint framebuffer, GLenum mode);
-typedef void (APIENTRYP PFNGLGETFRAMEBUFFERPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLECOVERAGEEXTPROC) (GLuint renderbuffer, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREEXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURELAYEREXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer);
-typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREFACEEXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLenum face);
-typedef void (APIENTRYP PFNGLTEXTURERENDERBUFFEREXTPROC) (GLuint texture, GLenum target, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLMULTITEXRENDERBUFFEREXTPROC) (GLenum texunit, GLenum target, GLuint renderbuffer);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DEXTPROC) (GLuint program, GLint location, GLdouble x);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value);
-#endif
-
-#ifndef GL_EXT_vertex_array_bgra
-#define GL_EXT_vertex_array_bgra 1
+GLAPI void APIENTRY glGetTexFilterFuncSGIS (GLenum target, GLenum filter, GLfloat *weights);
+GLAPI void APIENTRY glTexFilterFuncSGIS (GLenum target, GLenum filter, GLsizei n, const GLfloat *weights);
 #endif
+#endif /* GL_SGIS_texture_filter4 */
 
-#ifndef GL_EXT_texture_swizzle
-#define GL_EXT_texture_swizzle 1
-#endif
+#ifndef GL_SGIS_texture_lod
+#define GL_SGIS_texture_lod 1
+#define GL_TEXTURE_MIN_LOD_SGIS           0x813A
+#define GL_TEXTURE_MAX_LOD_SGIS           0x813B
+#define GL_TEXTURE_BASE_LEVEL_SGIS        0x813C
+#define GL_TEXTURE_MAX_LEVEL_SGIS         0x813D
+#endif /* GL_SGIS_texture_lod */
 
-#ifndef GL_NV_explicit_multisample
-#define GL_NV_explicit_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetMultisamplefvNV (GLenum pname, GLuint index, GLfloat *val);
-GLAPI void APIENTRY glSampleMaskIndexedNV (GLuint index, GLbitfield mask);
-GLAPI void APIENTRY glTexRenderbufferNV (GLenum target, GLuint renderbuffer);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETMULTISAMPLEFVNVPROC) (GLenum pname, GLuint index, GLfloat *val);
-typedef void (APIENTRYP PFNGLSAMPLEMASKINDEXEDNVPROC) (GLuint index, GLbitfield mask);
-typedef void (APIENTRYP PFNGLTEXRENDERBUFFERNVPROC) (GLenum target, GLuint renderbuffer);
-#endif
+#ifndef GL_SGIS_texture_select
+#define GL_SGIS_texture_select 1
+#define GL_DUAL_ALPHA4_SGIS               0x8110
+#define GL_DUAL_ALPHA8_SGIS               0x8111
+#define GL_DUAL_ALPHA12_SGIS              0x8112
+#define GL_DUAL_ALPHA16_SGIS              0x8113
+#define GL_DUAL_LUMINANCE4_SGIS           0x8114
+#define GL_DUAL_LUMINANCE8_SGIS           0x8115
+#define GL_DUAL_LUMINANCE12_SGIS          0x8116
+#define GL_DUAL_LUMINANCE16_SGIS          0x8117
+#define GL_DUAL_INTENSITY4_SGIS           0x8118
+#define GL_DUAL_INTENSITY8_SGIS           0x8119
+#define GL_DUAL_INTENSITY12_SGIS          0x811A
+#define GL_DUAL_INTENSITY16_SGIS          0x811B
+#define GL_DUAL_LUMINANCE_ALPHA4_SGIS     0x811C
+#define GL_DUAL_LUMINANCE_ALPHA8_SGIS     0x811D
+#define GL_QUAD_ALPHA4_SGIS               0x811E
+#define GL_QUAD_ALPHA8_SGIS               0x811F
+#define GL_QUAD_LUMINANCE4_SGIS           0x8120
+#define GL_QUAD_LUMINANCE8_SGIS           0x8121
+#define GL_QUAD_INTENSITY4_SGIS           0x8122
+#define GL_QUAD_INTENSITY8_SGIS           0x8123
+#define GL_DUAL_TEXTURE_SELECT_SGIS       0x8124
+#define GL_QUAD_TEXTURE_SELECT_SGIS       0x8125
+#endif /* GL_SGIS_texture_select */
 
-#ifndef GL_NV_transform_feedback2
-#define GL_NV_transform_feedback2 1
+#ifndef GL_SGIX_async
+#define GL_SGIX_async 1
+#define GL_ASYNC_MARKER_SGIX              0x8329
+typedef void (APIENTRYP PFNGLASYNCMARKERSGIXPROC) (GLuint marker);
+typedef GLint (APIENTRYP PFNGLFINISHASYNCSGIXPROC) (GLuint *markerp);
+typedef GLint (APIENTRYP PFNGLPOLLASYNCSGIXPROC) (GLuint *markerp);
+typedef GLuint (APIENTRYP PFNGLGENASYNCMARKERSSGIXPROC) (GLsizei range);
+typedef void (APIENTRYP PFNGLDELETEASYNCMARKERSSGIXPROC) (GLuint marker, GLsizei range);
+typedef GLboolean (APIENTRYP PFNGLISASYNCMARKERSGIXPROC) (GLuint marker);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindTransformFeedbackNV (GLenum target, GLuint id);
-GLAPI void APIENTRY glDeleteTransformFeedbacksNV (GLsizei n, const GLuint *ids);
-GLAPI void APIENTRY glGenTransformFeedbacksNV (GLsizei n, GLuint *ids);
-GLAPI GLboolean APIENTRY glIsTransformFeedbackNV (GLuint id);
-GLAPI void APIENTRY glPauseTransformFeedbackNV (void);
-GLAPI void APIENTRY glResumeTransformFeedbackNV (void);
-GLAPI void APIENTRY glDrawTransformFeedbackNV (GLenum mode, GLuint id);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDTRANSFORMFEEDBACKNVPROC) (GLenum target, GLuint id);
-typedef void (APIENTRYP PFNGLDELETETRANSFORMFEEDBACKSNVPROC) (GLsizei n, const GLuint *ids);
-typedef void (APIENTRYP PFNGLGENTRANSFORMFEEDBACKSNVPROC) (GLsizei n, GLuint *ids);
-typedef GLboolean (APIENTRYP PFNGLISTRANSFORMFEEDBACKNVPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLPAUSETRANSFORMFEEDBACKNVPROC) (void);
-typedef void (APIENTRYP PFNGLRESUMETRANSFORMFEEDBACKNVPROC) (void);
-typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKNVPROC) (GLenum mode, GLuint id);
-#endif
-
-#ifndef GL_ATI_meminfo
-#define GL_ATI_meminfo 1
+GLAPI void APIENTRY glAsyncMarkerSGIX (GLuint marker);
+GLAPI GLint APIENTRY glFinishAsyncSGIX (GLuint *markerp);
+GLAPI GLint APIENTRY glPollAsyncSGIX (GLuint *markerp);
+GLAPI GLuint APIENTRY glGenAsyncMarkersSGIX (GLsizei range);
+GLAPI void APIENTRY glDeleteAsyncMarkersSGIX (GLuint marker, GLsizei range);
+GLAPI GLboolean APIENTRY glIsAsyncMarkerSGIX (GLuint marker);
 #endif
+#endif /* GL_SGIX_async */
 
-#ifndef GL_AMD_performance_monitor
-#define GL_AMD_performance_monitor 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGetPerfMonitorGroupsAMD (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
-GLAPI void APIENTRY glGetPerfMonitorCountersAMD (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
-GLAPI void APIENTRY glGetPerfMonitorGroupStringAMD (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
-GLAPI void APIENTRY glGetPerfMonitorCounterStringAMD (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
-GLAPI void APIENTRY glGetPerfMonitorCounterInfoAMD (GLuint group, GLuint counter, GLenum pname, GLvoid *data);
-GLAPI void APIENTRY glGenPerfMonitorsAMD (GLsizei n, GLuint *monitors);
-GLAPI void APIENTRY glDeletePerfMonitorsAMD (GLsizei n, GLuint *monitors);
-GLAPI void APIENTRY glSelectPerfMonitorCountersAMD (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList);
-GLAPI void APIENTRY glBeginPerfMonitorAMD (GLuint monitor);
-GLAPI void APIENTRY glEndPerfMonitorAMD (GLuint monitor);
-GLAPI void APIENTRY glGetPerfMonitorCounterDataAMD (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGETPERFMONITORGROUPSAMDPROC) (GLint *numGroups, GLsizei groupsSize, GLuint *groups);
-typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERSAMDPROC) (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters);
-typedef void (APIENTRYP PFNGLGETPERFMONITORGROUPSTRINGAMDPROC) (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString);
-typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERSTRINGAMDPROC) (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString);
-typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERINFOAMDPROC) (GLuint group, GLuint counter, GLenum pname, GLvoid *data);
-typedef void (APIENTRYP PFNGLGENPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
-typedef void (APIENTRYP PFNGLDELETEPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors);
-typedef void (APIENTRYP PFNGLSELECTPERFMONITORCOUNTERSAMDPROC) (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList);
-typedef void (APIENTRYP PFNGLBEGINPERFMONITORAMDPROC) (GLuint monitor);
-typedef void (APIENTRYP PFNGLENDPERFMONITORAMDPROC) (GLuint monitor);
-typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERDATAAMDPROC) (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten);
-#endif
+#ifndef GL_SGIX_async_histogram
+#define GL_SGIX_async_histogram 1
+#define GL_ASYNC_HISTOGRAM_SGIX           0x832C
+#define GL_MAX_ASYNC_HISTOGRAM_SGIX       0x832D
+#endif /* GL_SGIX_async_histogram */
 
-#ifndef GL_AMD_texture_texture4
-#define GL_AMD_texture_texture4 1
-#endif
+#ifndef GL_SGIX_async_pixel
+#define GL_SGIX_async_pixel 1
+#define GL_ASYNC_TEX_IMAGE_SGIX           0x835C
+#define GL_ASYNC_DRAW_PIXELS_SGIX         0x835D
+#define GL_ASYNC_READ_PIXELS_SGIX         0x835E
+#define GL_MAX_ASYNC_TEX_IMAGE_SGIX       0x835F
+#define GL_MAX_ASYNC_DRAW_PIXELS_SGIX     0x8360
+#define GL_MAX_ASYNC_READ_PIXELS_SGIX     0x8361
+#endif /* GL_SGIX_async_pixel */
 
-#ifndef GL_AMD_vertex_shader_tesselator
-#define GL_AMD_vertex_shader_tesselator 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTessellationFactorAMD (GLfloat factor);
-GLAPI void APIENTRY glTessellationModeAMD (GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTESSELLATIONFACTORAMDPROC) (GLfloat factor);
-typedef void (APIENTRYP PFNGLTESSELLATIONMODEAMDPROC) (GLenum mode);
-#endif
+#ifndef GL_SGIX_blend_alpha_minmax
+#define GL_SGIX_blend_alpha_minmax 1
+#define GL_ALPHA_MIN_SGIX                 0x8320
+#define GL_ALPHA_MAX_SGIX                 0x8321
+#endif /* GL_SGIX_blend_alpha_minmax */
 
-#ifndef GL_EXT_provoking_vertex
-#define GL_EXT_provoking_vertex 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProvokingVertexEXT (GLenum mode);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROVOKINGVERTEXEXTPROC) (GLenum mode);
-#endif
+#ifndef GL_SGIX_calligraphic_fragment
+#define GL_SGIX_calligraphic_fragment 1
+#define GL_CALLIGRAPHIC_FRAGMENT_SGIX     0x8183
+#endif /* GL_SGIX_calligraphic_fragment */
 
-#ifndef GL_EXT_texture_snorm
-#define GL_EXT_texture_snorm 1
-#endif
+#ifndef GL_SGIX_clipmap
+#define GL_SGIX_clipmap 1
+#define GL_LINEAR_CLIPMAP_LINEAR_SGIX     0x8170
+#define GL_TEXTURE_CLIPMAP_CENTER_SGIX    0x8171
+#define GL_TEXTURE_CLIPMAP_FRAME_SGIX     0x8172
+#define GL_TEXTURE_CLIPMAP_OFFSET_SGIX    0x8173
+#define GL_TEXTURE_CLIPMAP_VIRTUAL_DEPTH_SGIX 0x8174
+#define GL_TEXTURE_CLIPMAP_LOD_OFFSET_SGIX 0x8175
+#define GL_TEXTURE_CLIPMAP_DEPTH_SGIX     0x8176
+#define GL_MAX_CLIPMAP_DEPTH_SGIX         0x8177
+#define GL_MAX_CLIPMAP_VIRTUAL_DEPTH_SGIX 0x8178
+#define GL_NEAREST_CLIPMAP_NEAREST_SGIX   0x844D
+#define GL_NEAREST_CLIPMAP_LINEAR_SGIX    0x844E
+#define GL_LINEAR_CLIPMAP_NEAREST_SGIX    0x844F
+#endif /* GL_SGIX_clipmap */
 
-#ifndef GL_AMD_draw_buffers_blend
-#define GL_AMD_draw_buffers_blend 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBlendFuncIndexedAMD (GLuint buf, GLenum src, GLenum dst);
-GLAPI void APIENTRY glBlendFuncSeparateIndexedAMD (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
-GLAPI void APIENTRY glBlendEquationIndexedAMD (GLuint buf, GLenum mode);
-GLAPI void APIENTRY glBlendEquationSeparateIndexedAMD (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBLENDFUNCINDEXEDAMDPROC) (GLuint buf, GLenum src, GLenum dst);
-typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEINDEXEDAMDPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
-typedef void (APIENTRYP PFNGLBLENDEQUATIONINDEXEDAMDPROC) (GLuint buf, GLenum mode);
-typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEINDEXEDAMDPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha);
-#endif
+#ifndef GL_SGIX_convolution_accuracy
+#define GL_SGIX_convolution_accuracy 1
+#define GL_CONVOLUTION_HINT_SGIX          0x8316
+#endif /* GL_SGIX_convolution_accuracy */
 
-#ifndef GL_APPLE_texture_range
-#define GL_APPLE_texture_range 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTextureRangeAPPLE (GLenum target, GLsizei length, const GLvoid *pointer);
-GLAPI void APIENTRY glGetTexParameterPointervAPPLE (GLenum target, GLenum pname, GLvoid* *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXTURERANGEAPPLEPROC) (GLenum target, GLsizei length, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLGETTEXPARAMETERPOINTERVAPPLEPROC) (GLenum target, GLenum pname, GLvoid* *params);
-#endif
+#ifndef GL_SGIX_depth_pass_instrument
+#define GL_SGIX_depth_pass_instrument 1
+#endif /* GL_SGIX_depth_pass_instrument */
 
-#ifndef GL_APPLE_float_pixels
-#define GL_APPLE_float_pixels 1
-#endif
+#ifndef GL_SGIX_depth_texture
+#define GL_SGIX_depth_texture 1
+#define GL_DEPTH_COMPONENT16_SGIX         0x81A5
+#define GL_DEPTH_COMPONENT24_SGIX         0x81A6
+#define GL_DEPTH_COMPONENT32_SGIX         0x81A7
+#endif /* GL_SGIX_depth_texture */
 
-#ifndef GL_APPLE_vertex_program_evaluators
-#define GL_APPLE_vertex_program_evaluators 1
+#ifndef GL_SGIX_flush_raster
+#define GL_SGIX_flush_raster 1
+typedef void (APIENTRYP PFNGLFLUSHRASTERSGIXPROC) (void);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glEnableVertexAttribAPPLE (GLuint index, GLenum pname);
-GLAPI void APIENTRY glDisableVertexAttribAPPLE (GLuint index, GLenum pname);
-GLAPI GLboolean APIENTRY glIsVertexAttribEnabledAPPLE (GLuint index, GLenum pname);
-GLAPI void APIENTRY glMapVertexAttrib1dAPPLE (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint stride, GLint order, const GLdouble *points);
-GLAPI void APIENTRY glMapVertexAttrib1fAPPLE (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint stride, GLint order, const GLfloat *points);
-GLAPI void APIENTRY glMapVertexAttrib2dAPPLE (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, const GLdouble *points);
-GLAPI void APIENTRY glMapVertexAttrib2fAPPLE (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, const GLfloat *points);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBAPPLEPROC) (GLuint index, GLenum pname);
-typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBAPPLEPROC) (GLuint index, GLenum pname);
-typedef GLboolean (APIENTRYP PFNGLISVERTEXATTRIBENABLEDAPPLEPROC) (GLuint index, GLenum pname);
-typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB1DAPPLEPROC) (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint stride, GLint order, const GLdouble *points);
-typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB1FAPPLEPROC) (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint stride, GLint order, const GLfloat *points);
-typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB2DAPPLEPROC) (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, const GLdouble *points);
-typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB2FAPPLEPROC) (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, const GLfloat *points);
+GLAPI void APIENTRY glFlushRasterSGIX (void);
 #endif
+#endif /* GL_SGIX_flush_raster */
 
-#ifndef GL_APPLE_aux_depth_stencil
-#define GL_APPLE_aux_depth_stencil 1
-#endif
+#ifndef GL_SGIX_fog_offset
+#define GL_SGIX_fog_offset 1
+#define GL_FOG_OFFSET_SGIX                0x8198
+#define GL_FOG_OFFSET_VALUE_SGIX          0x8199
+#endif /* GL_SGIX_fog_offset */
 
-#ifndef GL_APPLE_object_purgeable
-#define GL_APPLE_object_purgeable 1
+#ifndef GL_SGIX_fragment_lighting
+#define GL_SGIX_fragment_lighting 1
+#define GL_FRAGMENT_LIGHTING_SGIX         0x8400
+#define GL_FRAGMENT_COLOR_MATERIAL_SGIX   0x8401
+#define GL_FRAGMENT_COLOR_MATERIAL_FACE_SGIX 0x8402
+#define GL_FRAGMENT_COLOR_MATERIAL_PARAMETER_SGIX 0x8403
+#define GL_MAX_FRAGMENT_LIGHTS_SGIX       0x8404
+#define GL_MAX_ACTIVE_LIGHTS_SGIX         0x8405
+#define GL_CURRENT_RASTER_NORMAL_SGIX     0x8406
+#define GL_LIGHT_ENV_MODE_SGIX            0x8407
+#define GL_FRAGMENT_LIGHT_MODEL_LOCAL_VIEWER_SGIX 0x8408
+#define GL_FRAGMENT_LIGHT_MODEL_TWO_SIDE_SGIX 0x8409
+#define GL_FRAGMENT_LIGHT_MODEL_AMBIENT_SGIX 0x840A
+#define GL_FRAGMENT_LIGHT_MODEL_NORMAL_INTERPOLATION_SGIX 0x840B
+#define GL_FRAGMENT_LIGHT0_SGIX           0x840C
+#define GL_FRAGMENT_LIGHT1_SGIX           0x840D
+#define GL_FRAGMENT_LIGHT2_SGIX           0x840E
+#define GL_FRAGMENT_LIGHT3_SGIX           0x840F
+#define GL_FRAGMENT_LIGHT4_SGIX           0x8410
+#define GL_FRAGMENT_LIGHT5_SGIX           0x8411
+#define GL_FRAGMENT_LIGHT6_SGIX           0x8412
+#define GL_FRAGMENT_LIGHT7_SGIX           0x8413
+typedef void (APIENTRYP PFNGLFRAGMENTCOLORMATERIALSGIXPROC) (GLenum face, GLenum mode);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTFSGIXPROC) (GLenum light, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTFVSGIXPROC) (GLenum light, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTISGIXPROC) (GLenum light, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTIVSGIXPROC) (GLenum light, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELFSGIXPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELFVSGIXPROC) (GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELISGIXPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELIVSGIXPROC) (GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLFRAGMENTMATERIALFSGIXPROC) (GLenum face, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLFRAGMENTMATERIALFVSGIXPROC) (GLenum face, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLFRAGMENTMATERIALISGIXPROC) (GLenum face, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLFRAGMENTMATERIALIVSGIXPROC) (GLenum face, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLGETFRAGMENTLIGHTFVSGIXPROC) (GLenum light, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETFRAGMENTLIGHTIVSGIXPROC) (GLenum light, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLGETFRAGMENTMATERIALFVSGIXPROC) (GLenum face, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETFRAGMENTMATERIALIVSGIXPROC) (GLenum face, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLLIGHTENVISGIXPROC) (GLenum pname, GLint param);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLenum APIENTRY glObjectPurgeableAPPLE (GLenum objectType, GLuint name, GLenum option);
-GLAPI GLenum APIENTRY glObjectUnpurgeableAPPLE (GLenum objectType, GLuint name, GLenum option);
-GLAPI void APIENTRY glGetObjectParameterivAPPLE (GLenum objectType, GLuint name, GLenum pname, GLint *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLenum (APIENTRYP PFNGLOBJECTPURGEABLEAPPLEPROC) (GLenum objectType, GLuint name, GLenum option);
-typedef GLenum (APIENTRYP PFNGLOBJECTUNPURGEABLEAPPLEPROC) (GLenum objectType, GLuint name, GLenum option);
-typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERIVAPPLEPROC) (GLenum objectType, GLuint name, GLenum pname, GLint *params);
-#endif
-
-#ifndef GL_APPLE_row_bytes
-#define GL_APPLE_row_bytes 1
-#endif
-
-#ifndef GL_APPLE_rgb_422
-#define GL_APPLE_rgb_422 1
+GLAPI void APIENTRY glFragmentColorMaterialSGIX (GLenum face, GLenum mode);
+GLAPI void APIENTRY glFragmentLightfSGIX (GLenum light, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glFragmentLightfvSGIX (GLenum light, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glFragmentLightiSGIX (GLenum light, GLenum pname, GLint param);
+GLAPI void APIENTRY glFragmentLightivSGIX (GLenum light, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glFragmentLightModelfSGIX (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glFragmentLightModelfvSGIX (GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glFragmentLightModeliSGIX (GLenum pname, GLint param);
+GLAPI void APIENTRY glFragmentLightModelivSGIX (GLenum pname, const GLint *params);
+GLAPI void APIENTRY glFragmentMaterialfSGIX (GLenum face, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glFragmentMaterialfvSGIX (GLenum face, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glFragmentMaterialiSGIX (GLenum face, GLenum pname, GLint param);
+GLAPI void APIENTRY glFragmentMaterialivSGIX (GLenum face, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glGetFragmentLightfvSGIX (GLenum light, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetFragmentLightivSGIX (GLenum light, GLenum pname, GLint *params);
+GLAPI void APIENTRY glGetFragmentMaterialfvSGIX (GLenum face, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetFragmentMaterialivSGIX (GLenum face, GLenum pname, GLint *params);
+GLAPI void APIENTRY glLightEnviSGIX (GLenum pname, GLint param);
 #endif
+#endif /* GL_SGIX_fragment_lighting */
 
-#ifndef GL_NV_video_capture
-#define GL_NV_video_capture 1
+#ifndef GL_SGIX_framezoom
+#define GL_SGIX_framezoom 1
+#define GL_FRAMEZOOM_SGIX                 0x818B
+#define GL_FRAMEZOOM_FACTOR_SGIX          0x818C
+#define GL_MAX_FRAMEZOOM_FACTOR_SGIX      0x818D
+typedef void (APIENTRYP PFNGLFRAMEZOOMSGIXPROC) (GLint factor);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBeginVideoCaptureNV (GLuint video_capture_slot);
-GLAPI void APIENTRY glBindVideoCaptureStreamBufferNV (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLintptrARB offset);
-GLAPI void APIENTRY glBindVideoCaptureStreamTextureNV (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLenum target, GLuint texture);
-GLAPI void APIENTRY glEndVideoCaptureNV (GLuint video_capture_slot);
-GLAPI void APIENTRY glGetVideoCaptureivNV (GLuint video_capture_slot, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVideoCaptureStreamivNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLint *params);
-GLAPI void APIENTRY glGetVideoCaptureStreamfvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLfloat *params);
-GLAPI void APIENTRY glGetVideoCaptureStreamdvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLdouble *params);
-GLAPI GLenum APIENTRY glVideoCaptureNV (GLuint video_capture_slot, GLuint *sequence_num, GLuint64EXT *capture_time);
-GLAPI void APIENTRY glVideoCaptureStreamParameterivNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLint *params);
-GLAPI void APIENTRY glVideoCaptureStreamParameterfvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLfloat *params);
-GLAPI void APIENTRY glVideoCaptureStreamParameterdvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLdouble *params);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBEGINVIDEOCAPTURENVPROC) (GLuint video_capture_slot);
-typedef void (APIENTRYP PFNGLBINDVIDEOCAPTURESTREAMBUFFERNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLintptrARB offset);
-typedef void (APIENTRYP PFNGLBINDVIDEOCAPTURESTREAMTEXTURENVPROC) (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLenum target, GLuint texture);
-typedef void (APIENTRYP PFNGLENDVIDEOCAPTURENVPROC) (GLuint video_capture_slot);
-typedef void (APIENTRYP PFNGLGETVIDEOCAPTUREIVNVPROC) (GLuint video_capture_slot, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMIVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLint *params);
-typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMFVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLfloat *params);
-typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMDVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLdouble *params);
-typedef GLenum (APIENTRYP PFNGLVIDEOCAPTURENVPROC) (GLuint video_capture_slot, GLuint *sequence_num, GLuint64EXT *capture_time);
-typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERIVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLint *params);
-typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERFVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLfloat *params);
-typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERDVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLdouble *params);
+GLAPI void APIENTRY glFrameZoomSGIX (GLint factor);
 #endif
+#endif /* GL_SGIX_framezoom */
 
-#ifndef GL_NV_copy_image
-#define GL_NV_copy_image 1
+#ifndef GL_SGIX_igloo_interface
+#define GL_SGIX_igloo_interface 1
+typedef void (APIENTRYP PFNGLIGLOOINTERFACESGIXPROC) (GLenum pname, const void *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glCopyImageSubDataNV (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLCOPYIMAGESUBDATANVPROC) (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth);
+GLAPI void APIENTRY glIglooInterfaceSGIX (GLenum pname, const void *params);
 #endif
+#endif /* GL_SGIX_igloo_interface */
 
-#ifndef GL_EXT_separate_shader_objects
-#define GL_EXT_separate_shader_objects 1
+#ifndef GL_SGIX_instruments
+#define GL_SGIX_instruments 1
+#define GL_INSTRUMENT_BUFFER_POINTER_SGIX 0x8180
+#define GL_INSTRUMENT_MEASUREMENTS_SGIX   0x8181
+typedef GLint (APIENTRYP PFNGLGETINSTRUMENTSSGIXPROC) (void);
+typedef void (APIENTRYP PFNGLINSTRUMENTSBUFFERSGIXPROC) (GLsizei size, GLint *buffer);
+typedef GLint (APIENTRYP PFNGLPOLLINSTRUMENTSSGIXPROC) (GLint *marker_p);
+typedef void (APIENTRYP PFNGLREADINSTRUMENTSSGIXPROC) (GLint marker);
+typedef void (APIENTRYP PFNGLSTARTINSTRUMENTSSGIXPROC) (void);
+typedef void (APIENTRYP PFNGLSTOPINSTRUMENTSSGIXPROC) (GLint marker);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glUseShaderProgramEXT (GLenum type, GLuint program);
-GLAPI void APIENTRY glActiveProgramEXT (GLuint program);
-GLAPI GLuint APIENTRY glCreateShaderProgramEXT (GLenum type, const GLchar *string);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLUSESHADERPROGRAMEXTPROC) (GLenum type, GLuint program);
-typedef void (APIENTRYP PFNGLACTIVEPROGRAMEXTPROC) (GLuint program);
-typedef GLuint (APIENTRYP PFNGLCREATESHADERPROGRAMEXTPROC) (GLenum type, const GLchar *string);
-#endif
-
-#ifndef GL_NV_parameter_buffer_object2
-#define GL_NV_parameter_buffer_object2 1
+GLAPI GLint APIENTRY glGetInstrumentsSGIX (void);
+GLAPI void APIENTRY glInstrumentsBufferSGIX (GLsizei size, GLint *buffer);
+GLAPI GLint APIENTRY glPollInstrumentsSGIX (GLint *marker_p);
+GLAPI void APIENTRY glReadInstrumentsSGIX (GLint marker);
+GLAPI void APIENTRY glStartInstrumentsSGIX (void);
+GLAPI void APIENTRY glStopInstrumentsSGIX (GLint marker);
 #endif
+#endif /* GL_SGIX_instruments */
 
-#ifndef GL_NV_shader_buffer_load
-#define GL_NV_shader_buffer_load 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMakeBufferResidentNV (GLenum target, GLenum access);
-GLAPI void APIENTRY glMakeBufferNonResidentNV (GLenum target);
-GLAPI GLboolean APIENTRY glIsBufferResidentNV (GLenum target);
-GLAPI void APIENTRY glMakeNamedBufferResidentNV (GLuint buffer, GLenum access);
-GLAPI void APIENTRY glMakeNamedBufferNonResidentNV (GLuint buffer);
-GLAPI GLboolean APIENTRY glIsNamedBufferResidentNV (GLuint buffer);
-GLAPI void APIENTRY glGetBufferParameterui64vNV (GLenum target, GLenum pname, GLuint64EXT *params);
-GLAPI void APIENTRY glGetNamedBufferParameterui64vNV (GLuint buffer, GLenum pname, GLuint64EXT *params);
-GLAPI void APIENTRY glGetIntegerui64vNV (GLenum value, GLuint64EXT *result);
-GLAPI void APIENTRY glUniformui64NV (GLint location, GLuint64EXT value);
-GLAPI void APIENTRY glUniformui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glGetUniformui64vNV (GLuint program, GLint location, GLuint64EXT *params);
-GLAPI void APIENTRY glProgramUniformui64NV (GLuint program, GLint location, GLuint64EXT value);
-GLAPI void APIENTRY glProgramUniformui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMAKEBUFFERRESIDENTNVPROC) (GLenum target, GLenum access);
-typedef void (APIENTRYP PFNGLMAKEBUFFERNONRESIDENTNVPROC) (GLenum target);
-typedef GLboolean (APIENTRYP PFNGLISBUFFERRESIDENTNVPROC) (GLenum target);
-typedef void (APIENTRYP PFNGLMAKENAMEDBUFFERRESIDENTNVPROC) (GLuint buffer, GLenum access);
-typedef void (APIENTRYP PFNGLMAKENAMEDBUFFERNONRESIDENTNVPROC) (GLuint buffer);
-typedef GLboolean (APIENTRYP PFNGLISNAMEDBUFFERRESIDENTNVPROC) (GLuint buffer);
-typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERUI64VNVPROC) (GLenum target, GLenum pname, GLuint64EXT *params);
-typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERUI64VNVPROC) (GLuint buffer, GLenum pname, GLuint64EXT *params);
-typedef void (APIENTRYP PFNGLGETINTEGERUI64VNVPROC) (GLenum value, GLuint64EXT *result);
-typedef void (APIENTRYP PFNGLUNIFORMUI64NVPROC) (GLint location, GLuint64EXT value);
-typedef void (APIENTRYP PFNGLUNIFORMUI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLGETUNIFORMUI64VNVPROC) (GLuint program, GLint location, GLuint64EXT *params);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMUI64NVPROC) (GLuint program, GLint location, GLuint64EXT value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMUI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-#endif
+#ifndef GL_SGIX_interlace
+#define GL_SGIX_interlace 1
+#define GL_INTERLACE_SGIX                 0x8094
+#endif /* GL_SGIX_interlace */
 
-#ifndef GL_NV_vertex_buffer_unified_memory
-#define GL_NV_vertex_buffer_unified_memory 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBufferAddressRangeNV (GLenum pname, GLuint index, GLuint64EXT address, GLsizeiptr length);
-GLAPI void APIENTRY glVertexFormatNV (GLint size, GLenum type, GLsizei stride);
-GLAPI void APIENTRY glNormalFormatNV (GLenum type, GLsizei stride);
-GLAPI void APIENTRY glColorFormatNV (GLint size, GLenum type, GLsizei stride);
-GLAPI void APIENTRY glIndexFormatNV (GLenum type, GLsizei stride);
-GLAPI void APIENTRY glTexCoordFormatNV (GLint size, GLenum type, GLsizei stride);
-GLAPI void APIENTRY glEdgeFlagFormatNV (GLsizei stride);
-GLAPI void APIENTRY glSecondaryColorFormatNV (GLint size, GLenum type, GLsizei stride);
-GLAPI void APIENTRY glFogCoordFormatNV (GLenum type, GLsizei stride);
-GLAPI void APIENTRY glVertexAttribFormatNV (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride);
-GLAPI void APIENTRY glVertexAttribIFormatNV (GLuint index, GLint size, GLenum type, GLsizei stride);
-GLAPI void APIENTRY glGetIntegerui64i_vNV (GLenum value, GLuint index, GLuint64EXT *result);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBUFFERADDRESSRANGENVPROC) (GLenum pname, GLuint index, GLuint64EXT address, GLsizeiptr length);
-typedef void (APIENTRYP PFNGLVERTEXFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLNORMALFORMATNVPROC) (GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLCOLORFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLINDEXFORMATNVPROC) (GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLTEXCOORDFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLEDGEFLAGFORMATNVPROC) (GLsizei stride);
-typedef void (APIENTRYP PFNGLSECONDARYCOLORFORMATNVPROC) (GLint size, GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLFOGCOORDFORMATNVPROC) (GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBIFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLsizei stride);
-typedef void (APIENTRYP PFNGLGETINTEGERUI64I_VNVPROC) (GLenum value, GLuint index, GLuint64EXT *result);
-#endif
+#ifndef GL_SGIX_ir_instrument1
+#define GL_SGIX_ir_instrument1 1
+#define GL_IR_INSTRUMENT1_SGIX            0x817F
+#endif /* GL_SGIX_ir_instrument1 */
 
-#ifndef GL_NV_texture_barrier
-#define GL_NV_texture_barrier 1
+#ifndef GL_SGIX_list_priority
+#define GL_SGIX_list_priority 1
+#define GL_LIST_PRIORITY_SGIX             0x8182
+typedef void (APIENTRYP PFNGLGETLISTPARAMETERFVSGIXPROC) (GLuint list, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETLISTPARAMETERIVSGIXPROC) (GLuint list, GLenum pname, GLint *params);
+typedef void (APIENTRYP PFNGLLISTPARAMETERFSGIXPROC) (GLuint list, GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLLISTPARAMETERFVSGIXPROC) (GLuint list, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLLISTPARAMETERISGIXPROC) (GLuint list, GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLLISTPARAMETERIVSGIXPROC) (GLuint list, GLenum pname, const GLint *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTextureBarrierNV (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXTUREBARRIERNVPROC) (void);
-#endif
-
-#ifndef GL_AMD_shader_stencil_export
-#define GL_AMD_shader_stencil_export 1
-#endif
-
-#ifndef GL_AMD_seamless_cubemap_per_texture
-#define GL_AMD_seamless_cubemap_per_texture 1
-#endif
-
-#ifndef GL_AMD_conservative_depth
-#define GL_AMD_conservative_depth 1
+GLAPI void APIENTRY glGetListParameterfvSGIX (GLuint list, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetListParameterivSGIX (GLuint list, GLenum pname, GLint *params);
+GLAPI void APIENTRY glListParameterfSGIX (GLuint list, GLenum pname, GLfloat param);
+GLAPI void APIENTRY glListParameterfvSGIX (GLuint list, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glListParameteriSGIX (GLuint list, GLenum pname, GLint param);
+GLAPI void APIENTRY glListParameterivSGIX (GLuint list, GLenum pname, const GLint *params);
 #endif
+#endif /* GL_SGIX_list_priority */
 
-#ifndef GL_EXT_shader_image_load_store
-#define GL_EXT_shader_image_load_store 1
+#ifndef GL_SGIX_pixel_texture
+#define GL_SGIX_pixel_texture 1
+#define GL_PIXEL_TEX_GEN_SGIX             0x8139
+#define GL_PIXEL_TEX_GEN_MODE_SGIX        0x832B
+typedef void (APIENTRYP PFNGLPIXELTEXGENSGIXPROC) (GLenum mode);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBindImageTextureEXT (GLuint index, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLint format);
-GLAPI void APIENTRY glMemoryBarrierEXT (GLbitfield barriers);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBINDIMAGETEXTUREEXTPROC) (GLuint index, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLint format);
-typedef void (APIENTRYP PFNGLMEMORYBARRIEREXTPROC) (GLbitfield barriers);
+GLAPI void APIENTRY glPixelTexGenSGIX (GLenum mode);
 #endif
+#endif /* GL_SGIX_pixel_texture */
 
-#ifndef GL_EXT_vertex_attrib_64bit
-#define GL_EXT_vertex_attrib_64bit 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttribL1dEXT (GLuint index, GLdouble x);
-GLAPI void APIENTRY glVertexAttribL2dEXT (GLuint index, GLdouble x, GLdouble y);
-GLAPI void APIENTRY glVertexAttribL3dEXT (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-GLAPI void APIENTRY glVertexAttribL4dEXT (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-GLAPI void APIENTRY glVertexAttribL1dvEXT (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribL2dvEXT (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribL3dvEXT (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribL4dvEXT (GLuint index, const GLdouble *v);
-GLAPI void APIENTRY glVertexAttribLPointerEXT (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-GLAPI void APIENTRY glGetVertexAttribLdvEXT (GLuint index, GLenum pname, GLdouble *params);
-GLAPI void APIENTRY glVertexArrayVertexAttribLOffsetEXT (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DEXTPROC) (GLuint index, GLdouble x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DEXTPROC) (GLuint index, GLdouble x, GLdouble y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DEXTPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DEXTPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DVEXTPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DVEXTPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DVEXTPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DVEXTPROC) (GLuint index, const GLdouble *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBLPOINTEREXTPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLDVEXTPROC) (GLuint index, GLenum pname, GLdouble *params);
-typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBLOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset);
-#endif
+#ifndef GL_SGIX_pixel_tiles
+#define GL_SGIX_pixel_tiles 1
+#define GL_PIXEL_TILE_BEST_ALIGNMENT_SGIX 0x813E
+#define GL_PIXEL_TILE_CACHE_INCREMENT_SGIX 0x813F
+#define GL_PIXEL_TILE_WIDTH_SGIX          0x8140
+#define GL_PIXEL_TILE_HEIGHT_SGIX         0x8141
+#define GL_PIXEL_TILE_GRID_WIDTH_SGIX     0x8142
+#define GL_PIXEL_TILE_GRID_HEIGHT_SGIX    0x8143
+#define GL_PIXEL_TILE_GRID_DEPTH_SGIX     0x8144
+#define GL_PIXEL_TILE_CACHE_SIZE_SGIX     0x8145
+#endif /* GL_SGIX_pixel_tiles */
 
-#ifndef GL_NV_gpu_program5
-#define GL_NV_gpu_program5 1
+#ifndef GL_SGIX_polynomial_ffd
+#define GL_SGIX_polynomial_ffd 1
+#define GL_TEXTURE_DEFORMATION_BIT_SGIX   0x00000001
+#define GL_GEOMETRY_DEFORMATION_BIT_SGIX  0x00000002
+#define GL_GEOMETRY_DEFORMATION_SGIX      0x8194
+#define GL_TEXTURE_DEFORMATION_SGIX       0x8195
+#define GL_DEFORMATIONS_MASK_SGIX         0x8196
+#define GL_MAX_DEFORMATION_ORDER_SGIX     0x8197
+typedef void (APIENTRYP PFNGLDEFORMATIONMAP3DSGIXPROC) (GLenum target, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, GLdouble w1, GLdouble w2, GLint wstride, GLint worder, const GLdouble *points);
+typedef void (APIENTRYP PFNGLDEFORMATIONMAP3FSGIXPROC) (GLenum target, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, GLfloat w1, GLfloat w2, GLint wstride, GLint worder, const GLfloat *points);
+typedef void (APIENTRYP PFNGLDEFORMSGIXPROC) (GLbitfield mask);
+typedef void (APIENTRYP PFNGLLOADIDENTITYDEFORMATIONMAPSGIXPROC) (GLbitfield mask);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glProgramSubroutineParametersuivNV (GLenum target, GLsizei count, const GLuint *params);
-GLAPI void APIENTRY glGetProgramSubroutineParameteruivNV (GLenum target, GLuint index, GLuint *param);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLPROGRAMSUBROUTINEPARAMETERSUIVNVPROC) (GLenum target, GLsizei count, const GLuint *params);
-typedef void (APIENTRYP PFNGLGETPROGRAMSUBROUTINEPARAMETERUIVNVPROC) (GLenum target, GLuint index, GLuint *param);
+GLAPI void APIENTRY glDeformationMap3dSGIX (GLenum target, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, GLdouble w1, GLdouble w2, GLint wstride, GLint worder, const GLdouble *points);
+GLAPI void APIENTRY glDeformationMap3fSGIX (GLenum target, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, GLfloat w1, GLfloat w2, GLint wstride, GLint worder, const GLfloat *points);
+GLAPI void APIENTRY glDeformSGIX (GLbitfield mask);
+GLAPI void APIENTRY glLoadIdentityDeformationMapSGIX (GLbitfield mask);
 #endif
+#endif /* GL_SGIX_polynomial_ffd */
 
-#ifndef GL_NV_gpu_shader5
-#define GL_NV_gpu_shader5 1
+#ifndef GL_SGIX_reference_plane
+#define GL_SGIX_reference_plane 1
+#define GL_REFERENCE_PLANE_SGIX           0x817D
+#define GL_REFERENCE_PLANE_EQUATION_SGIX  0x817E
+typedef void (APIENTRYP PFNGLREFERENCEPLANESGIXPROC) (const GLdouble *equation);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glUniform1i64NV (GLint location, GLint64EXT x);
-GLAPI void APIENTRY glUniform2i64NV (GLint location, GLint64EXT x, GLint64EXT y);
-GLAPI void APIENTRY glUniform3i64NV (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
-GLAPI void APIENTRY glUniform4i64NV (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
-GLAPI void APIENTRY glUniform1i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glUniform2i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glUniform3i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glUniform4i64vNV (GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glUniform1ui64NV (GLint location, GLuint64EXT x);
-GLAPI void APIENTRY glUniform2ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y);
-GLAPI void APIENTRY glUniform3ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
-GLAPI void APIENTRY glUniform4ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
-GLAPI void APIENTRY glUniform1ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glUniform2ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glUniform3ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glUniform4ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glGetUniformi64vNV (GLuint program, GLint location, GLint64EXT *params);
-GLAPI void APIENTRY glProgramUniform1i64NV (GLuint program, GLint location, GLint64EXT x);
-GLAPI void APIENTRY glProgramUniform2i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y);
-GLAPI void APIENTRY glProgramUniform3i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
-GLAPI void APIENTRY glProgramUniform4i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
-GLAPI void APIENTRY glProgramUniform1i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glProgramUniform2i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glProgramUniform3i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glProgramUniform4i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-GLAPI void APIENTRY glProgramUniform1ui64NV (GLuint program, GLint location, GLuint64EXT x);
-GLAPI void APIENTRY glProgramUniform2ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y);
-GLAPI void APIENTRY glProgramUniform3ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
-GLAPI void APIENTRY glProgramUniform4ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
-GLAPI void APIENTRY glProgramUniform1ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glProgramUniform2ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glProgramUniform3ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-GLAPI void APIENTRY glProgramUniform4ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLUNIFORM1I64NVPROC) (GLint location, GLint64EXT x);
-typedef void (APIENTRYP PFNGLUNIFORM2I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y);
-typedef void (APIENTRYP PFNGLUNIFORM3I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
-typedef void (APIENTRYP PFNGLUNIFORM4I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
-typedef void (APIENTRYP PFNGLUNIFORM1I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM2I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM3I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM4I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM1UI64NVPROC) (GLint location, GLuint64EXT x);
-typedef void (APIENTRYP PFNGLUNIFORM2UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y);
-typedef void (APIENTRYP PFNGLUNIFORM3UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
-typedef void (APIENTRYP PFNGLUNIFORM4UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
-typedef void (APIENTRYP PFNGLUNIFORM1UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM2UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM3UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLUNIFORM4UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLGETUNIFORMI64VNVPROC) (GLuint program, GLint location, GLint64EXT *params);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1I64NVPROC) (GLuint program, GLint location, GLint64EXT x);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value);
+GLAPI void APIENTRY glReferencePlaneSGIX (const GLdouble *equation);
 #endif
+#endif /* GL_SGIX_reference_plane */
 
-#ifndef GL_NV_shader_buffer_store
-#define GL_NV_shader_buffer_store 1
-#endif
+#ifndef GL_SGIX_resample
+#define GL_SGIX_resample 1
+#define GL_PACK_RESAMPLE_SGIX             0x842C
+#define GL_UNPACK_RESAMPLE_SGIX           0x842D
+#define GL_RESAMPLE_REPLICATE_SGIX        0x842E
+#define GL_RESAMPLE_ZERO_FILL_SGIX        0x842F
+#define GL_RESAMPLE_DECIMATE_SGIX         0x8430
+#endif /* GL_SGIX_resample */
 
-#ifndef GL_NV_tessellation_program5
-#define GL_NV_tessellation_program5 1
-#endif
+#ifndef GL_SGIX_scalebias_hint
+#define GL_SGIX_scalebias_hint 1
+#define GL_SCALEBIAS_HINT_SGIX            0x8322
+#endif /* GL_SGIX_scalebias_hint */
 
-#ifndef GL_NV_vertex_attrib_integer_64bit
-#define GL_NV_vertex_attrib_integer_64bit 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVertexAttribL1i64NV (GLuint index, GLint64EXT x);
-GLAPI void APIENTRY glVertexAttribL2i64NV (GLuint index, GLint64EXT x, GLint64EXT y);
-GLAPI void APIENTRY glVertexAttribL3i64NV (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z);
-GLAPI void APIENTRY glVertexAttribL4i64NV (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
-GLAPI void APIENTRY glVertexAttribL1i64vNV (GLuint index, const GLint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL2i64vNV (GLuint index, const GLint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL3i64vNV (GLuint index, const GLint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL4i64vNV (GLuint index, const GLint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL1ui64NV (GLuint index, GLuint64EXT x);
-GLAPI void APIENTRY glVertexAttribL2ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y);
-GLAPI void APIENTRY glVertexAttribL3ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
-GLAPI void APIENTRY glVertexAttribL4ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
-GLAPI void APIENTRY glVertexAttribL1ui64vNV (GLuint index, const GLuint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL2ui64vNV (GLuint index, const GLuint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL3ui64vNV (GLuint index, const GLuint64EXT *v);
-GLAPI void APIENTRY glVertexAttribL4ui64vNV (GLuint index, const GLuint64EXT *v);
-GLAPI void APIENTRY glGetVertexAttribLi64vNV (GLuint index, GLenum pname, GLint64EXT *params);
-GLAPI void APIENTRY glGetVertexAttribLui64vNV (GLuint index, GLenum pname, GLuint64EXT *params);
-GLAPI void APIENTRY glVertexAttribLFormatNV (GLuint index, GLint size, GLenum type, GLsizei stride);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1I64NVPROC) (GLuint index, GLint64EXT x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1I64VNVPROC) (GLuint index, const GLint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2I64VNVPROC) (GLuint index, const GLint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3I64VNVPROC) (GLuint index, const GLint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4I64VNVPROC) (GLuint index, const GLint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64NVPROC) (GLuint index, GLuint64EXT x);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL2UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL3UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBL4UI64VNVPROC) (GLuint index, const GLuint64EXT *v);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLI64VNVPROC) (GLuint index, GLenum pname, GLint64EXT *params);
-typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLUI64VNVPROC) (GLuint index, GLenum pname, GLuint64EXT *params);
-typedef void (APIENTRYP PFNGLVERTEXATTRIBLFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLsizei stride);
-#endif
+#ifndef GL_SGIX_shadow
+#define GL_SGIX_shadow 1
+#define GL_TEXTURE_COMPARE_SGIX           0x819A
+#define GL_TEXTURE_COMPARE_OPERATOR_SGIX  0x819B
+#define GL_TEXTURE_LEQUAL_R_SGIX          0x819C
+#define GL_TEXTURE_GEQUAL_R_SGIX          0x819D
+#endif /* GL_SGIX_shadow */
 
-#ifndef GL_NV_multisample_coverage
-#define GL_NV_multisample_coverage 1
-#endif
+#ifndef GL_SGIX_shadow_ambient
+#define GL_SGIX_shadow_ambient 1
+#define GL_SHADOW_AMBIENT_SGIX            0x80BF
+#endif /* GL_SGIX_shadow_ambient */
 
-#ifndef GL_AMD_name_gen_delete
-#define GL_AMD_name_gen_delete 1
+#ifndef GL_SGIX_sprite
+#define GL_SGIX_sprite 1
+#define GL_SPRITE_SGIX                    0x8148
+#define GL_SPRITE_MODE_SGIX               0x8149
+#define GL_SPRITE_AXIS_SGIX               0x814A
+#define GL_SPRITE_TRANSLATION_SGIX        0x814B
+#define GL_SPRITE_AXIAL_SGIX              0x814C
+#define GL_SPRITE_OBJECT_ALIGNED_SGIX     0x814D
+#define GL_SPRITE_EYE_ALIGNED_SGIX        0x814E
+typedef void (APIENTRYP PFNGLSPRITEPARAMETERFSGIXPROC) (GLenum pname, GLfloat param);
+typedef void (APIENTRYP PFNGLSPRITEPARAMETERFVSGIXPROC) (GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLSPRITEPARAMETERISGIXPROC) (GLenum pname, GLint param);
+typedef void (APIENTRYP PFNGLSPRITEPARAMETERIVSGIXPROC) (GLenum pname, const GLint *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glGenNamesAMD (GLenum identifier, GLuint num, GLuint *names);
-GLAPI void APIENTRY glDeleteNamesAMD (GLenum identifier, GLuint num, const GLuint *names);
-GLAPI GLboolean APIENTRY glIsNameAMD (GLenum identifier, GLuint name);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLGENNAMESAMDPROC) (GLenum identifier, GLuint num, GLuint *names);
-typedef void (APIENTRYP PFNGLDELETENAMESAMDPROC) (GLenum identifier, GLuint num, const GLuint *names);
-typedef GLboolean (APIENTRYP PFNGLISNAMEAMDPROC) (GLenum identifier, GLuint name);
+GLAPI void APIENTRY glSpriteParameterfSGIX (GLenum pname, GLfloat param);
+GLAPI void APIENTRY glSpriteParameterfvSGIX (GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glSpriteParameteriSGIX (GLenum pname, GLint param);
+GLAPI void APIENTRY glSpriteParameterivSGIX (GLenum pname, const GLint *params);
 #endif
+#endif /* GL_SGIX_sprite */
 
-#ifndef GL_AMD_debug_output
-#define GL_AMD_debug_output 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDebugMessageEnableAMD (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-GLAPI void APIENTRY glDebugMessageInsertAMD (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf);
-GLAPI void APIENTRY glDebugMessageCallbackAMD (GLDEBUGPROCAMD callback, GLvoid *userParam);
-GLAPI GLuint APIENTRY glGetDebugMessageLogAMD (GLuint count, GLsizei bufsize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDEBUGMESSAGEENABLEAMDPROC) (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
-typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTAMDPROC) (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf);
-typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKAMDPROC) (GLDEBUGPROCAMD callback, GLvoid *userParam);
-typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGAMDPROC) (GLuint count, GLsizei bufsize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
-#endif
+#ifndef GL_SGIX_subsample
+#define GL_SGIX_subsample 1
+#define GL_PACK_SUBSAMPLE_RATE_SGIX       0x85A0
+#define GL_UNPACK_SUBSAMPLE_RATE_SGIX     0x85A1
+#define GL_PIXEL_SUBSAMPLE_4444_SGIX      0x85A2
+#define GL_PIXEL_SUBSAMPLE_2424_SGIX      0x85A3
+#define GL_PIXEL_SUBSAMPLE_4242_SGIX      0x85A4
+#endif /* GL_SGIX_subsample */
 
-#ifndef GL_NV_vdpau_interop
-#define GL_NV_vdpau_interop 1
+#ifndef GL_SGIX_tag_sample_buffer
+#define GL_SGIX_tag_sample_buffer 1
+typedef void (APIENTRYP PFNGLTAGSAMPLEBUFFERSGIXPROC) (void);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glVDPAUInitNV (const GLvoid *vdpDevice, const GLvoid *getProcAddress);
-GLAPI void APIENTRY glVDPAUFiniNV (void);
-GLAPI GLvdpauSurfaceNV APIENTRY glVDPAURegisterVideoSurfaceNV (const GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
-GLAPI GLvdpauSurfaceNV APIENTRY glVDPAURegisterOutputSurfaceNV (GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
-GLAPI void APIENTRY glVDPAUIsSurfaceNV (GLvdpauSurfaceNV surface);
-GLAPI void APIENTRY glVDPAUUnregisterSurfaceNV (GLvdpauSurfaceNV surface);
-GLAPI void APIENTRY glVDPAUGetSurfaceivNV (GLvdpauSurfaceNV surface, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
-GLAPI void APIENTRY glVDPAUSurfaceAccessNV (GLvdpauSurfaceNV surface, GLenum access);
-GLAPI void APIENTRY glVDPAUMapSurfacesNV (GLsizei numSurfaces, const GLvdpauSurfaceNV *surfaces);
-GLAPI void APIENTRY glVDPAUUnmapSurfacesNV (GLsizei numSurface, const GLvdpauSurfaceNV *surfaces);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLVDPAUINITNVPROC) (const GLvoid *vdpDevice, const GLvoid *getProcAddress);
-typedef void (APIENTRYP PFNGLVDPAUFININVPROC) (void);
-typedef GLvdpauSurfaceNV (APIENTRYP PFNGLVDPAUREGISTERVIDEOSURFACENVPROC) (const GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
-typedef GLvdpauSurfaceNV (APIENTRYP PFNGLVDPAUREGISTEROUTPUTSURFACENVPROC) (GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames);
-typedef void (APIENTRYP PFNGLVDPAUISSURFACENVPROC) (GLvdpauSurfaceNV surface);
-typedef void (APIENTRYP PFNGLVDPAUUNREGISTERSURFACENVPROC) (GLvdpauSurfaceNV surface);
-typedef void (APIENTRYP PFNGLVDPAUGETSURFACEIVNVPROC) (GLvdpauSurfaceNV surface, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values);
-typedef void (APIENTRYP PFNGLVDPAUSURFACEACCESSNVPROC) (GLvdpauSurfaceNV surface, GLenum access);
-typedef void (APIENTRYP PFNGLVDPAUMAPSURFACESNVPROC) (GLsizei numSurfaces, const GLvdpauSurfaceNV *surfaces);
-typedef void (APIENTRYP PFNGLVDPAUUNMAPSURFACESNVPROC) (GLsizei numSurface, const GLvdpauSurfaceNV *surfaces);
-#endif
-
-#ifndef GL_AMD_transform_feedback3_lines_triangles
-#define GL_AMD_transform_feedback3_lines_triangles 1
+GLAPI void APIENTRY glTagSampleBufferSGIX (void);
 #endif
+#endif /* GL_SGIX_tag_sample_buffer */
 
-#ifndef GL_AMD_depth_clamp_separate
-#define GL_AMD_depth_clamp_separate 1
-#endif
+#ifndef GL_SGIX_texture_add_env
+#define GL_SGIX_texture_add_env 1
+#define GL_TEXTURE_ENV_BIAS_SGIX          0x80BE
+#endif /* GL_SGIX_texture_add_env */
 
-#ifndef GL_EXT_texture_sRGB_decode
-#define GL_EXT_texture_sRGB_decode 1
-#endif
+#ifndef GL_SGIX_texture_coordinate_clamp
+#define GL_SGIX_texture_coordinate_clamp 1
+#define GL_TEXTURE_MAX_CLAMP_S_SGIX       0x8369
+#define GL_TEXTURE_MAX_CLAMP_T_SGIX       0x836A
+#define GL_TEXTURE_MAX_CLAMP_R_SGIX       0x836B
+#endif /* GL_SGIX_texture_coordinate_clamp */
 
-#ifndef GL_NV_texture_multisample
-#define GL_NV_texture_multisample 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexImage2DMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
-GLAPI void APIENTRY glTexImage3DMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
-GLAPI void APIENTRY glTextureImage2DMultisampleNV (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
-GLAPI void APIENTRY glTextureImage3DMultisampleNV (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
-GLAPI void APIENTRY glTextureImage2DMultisampleCoverageNV (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
-GLAPI void APIENTRY glTextureImage3DMultisampleCoverageNV (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXIMAGE2DMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
-typedef void (APIENTRYP PFNGLTEXIMAGE3DMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DMULTISAMPLENVPROC) (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DMULTISAMPLENVPROC) (GLuint texture, GLenum target, GLsizei samples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DMULTISAMPLECOVERAGENVPROC) (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLboolean fixedSampleLocations);
-typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DMULTISAMPLECOVERAGENVPROC) (GLuint texture, GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLint internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedSampleLocations);
-#endif
+#ifndef GL_SGIX_texture_lod_bias
+#define GL_SGIX_texture_lod_bias 1
+#define GL_TEXTURE_LOD_BIAS_S_SGIX        0x818E
+#define GL_TEXTURE_LOD_BIAS_T_SGIX        0x818F
+#define GL_TEXTURE_LOD_BIAS_R_SGIX        0x8190
+#endif /* GL_SGIX_texture_lod_bias */
 
-#ifndef GL_AMD_blend_minmax_factor
-#define GL_AMD_blend_minmax_factor 1
-#endif
+#ifndef GL_SGIX_texture_multi_buffer
+#define GL_SGIX_texture_multi_buffer 1
+#define GL_TEXTURE_MULTI_BUFFER_HINT_SGIX 0x812E
+#endif /* GL_SGIX_texture_multi_buffer */
 
-#ifndef GL_AMD_sample_positions
-#define GL_AMD_sample_positions 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSetMultisamplefvAMD (GLenum pname, GLuint index, const GLfloat *val);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSETMULTISAMPLEFVAMDPROC) (GLenum pname, GLuint index, const GLfloat *val);
-#endif
+#ifndef GL_SGIX_texture_scale_bias
+#define GL_SGIX_texture_scale_bias 1
+#define GL_POST_TEXTURE_FILTER_BIAS_SGIX  0x8179
+#define GL_POST_TEXTURE_FILTER_SCALE_SGIX 0x817A
+#define GL_POST_TEXTURE_FILTER_BIAS_RANGE_SGIX 0x817B
+#define GL_POST_TEXTURE_FILTER_SCALE_RANGE_SGIX 0x817C
+#endif /* GL_SGIX_texture_scale_bias */
 
-#ifndef GL_EXT_x11_sync_object
-#define GL_EXT_x11_sync_object 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLsync APIENTRY glImportSyncEXT (GLenum external_sync_type, GLintptr external_sync, GLbitfield flags);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLsync (APIENTRYP PFNGLIMPORTSYNCEXTPROC) (GLenum external_sync_type, GLintptr external_sync, GLbitfield flags);
-#endif
+#ifndef GL_SGIX_vertex_preclip
+#define GL_SGIX_vertex_preclip 1
+#define GL_VERTEX_PRECLIP_SGIX            0x83EE
+#define GL_VERTEX_PRECLIP_HINT_SGIX       0x83EF
+#endif /* GL_SGIX_vertex_preclip */
 
-#ifndef GL_AMD_multi_draw_indirect
-#define GL_AMD_multi_draw_indirect 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glMultiDrawArraysIndirectAMD (GLenum mode, const GLvoid *indirect, GLsizei primcount, GLsizei stride);
-GLAPI void APIENTRY glMultiDrawElementsIndirectAMD (GLenum mode, GLenum type, const GLvoid *indirect, GLsizei primcount, GLsizei stride);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSINDIRECTAMDPROC) (GLenum mode, const GLvoid *indirect, GLsizei primcount, GLsizei stride);
-typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSINDIRECTAMDPROC) (GLenum mode, GLenum type, const GLvoid *indirect, GLsizei primcount, GLsizei stride);
-#endif
+#ifndef GL_SGIX_ycrcb
+#define GL_SGIX_ycrcb 1
+#define GL_YCRCB_422_SGIX                 0x81BB
+#define GL_YCRCB_444_SGIX                 0x81BC
+#endif /* GL_SGIX_ycrcb */
 
-#ifndef GL_EXT_framebuffer_multisample_blit_scaled
-#define GL_EXT_framebuffer_multisample_blit_scaled 1
-#endif
+#ifndef GL_SGIX_ycrcb_subsample
+#define GL_SGIX_ycrcb_subsample 1
+#endif /* GL_SGIX_ycrcb_subsample */
 
-#ifndef GL_NV_path_rendering
-#define GL_NV_path_rendering 1
-#ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLuint APIENTRY glGenPathsNV (GLsizei range);
-GLAPI void APIENTRY glDeletePathsNV (GLuint path, GLsizei range);
-GLAPI GLboolean APIENTRY glIsPathNV (GLuint path);
-GLAPI void APIENTRY glPathCommandsNV (GLuint path, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-GLAPI void APIENTRY glPathCoordsNV (GLuint path, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-GLAPI void APIENTRY glPathSubCommandsNV (GLuint path, GLsizei commandStart, GLsizei commandsToDelete, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-GLAPI void APIENTRY glPathSubCoordsNV (GLuint path, GLsizei coordStart, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-GLAPI void APIENTRY glPathStringNV (GLuint path, GLenum format, GLsizei length, const GLvoid *pathString);
-GLAPI void APIENTRY glPathGlyphsNV (GLuint firstPathName, GLenum fontTarget, const GLvoid *fontName, GLbitfield fontStyle, GLsizei numGlyphs, GLenum type, const GLvoid *charcodes, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
-GLAPI void APIENTRY glPathGlyphRangeNV (GLuint firstPathName, GLenum fontTarget, const GLvoid *fontName, GLbitfield fontStyle, GLuint firstGlyph, GLsizei numGlyphs, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
-GLAPI void APIENTRY glWeightPathsNV (GLuint resultPath, GLsizei numPaths, const GLuint *paths, const GLfloat *weights);
-GLAPI void APIENTRY glCopyPathNV (GLuint resultPath, GLuint srcPath);
-GLAPI void APIENTRY glInterpolatePathsNV (GLuint resultPath, GLuint pathA, GLuint pathB, GLfloat weight);
-GLAPI void APIENTRY glTransformPathNV (GLuint resultPath, GLuint srcPath, GLenum transformType, const GLfloat *transformValues);
-GLAPI void APIENTRY glPathParameterivNV (GLuint path, GLenum pname, const GLint *value);
-GLAPI void APIENTRY glPathParameteriNV (GLuint path, GLenum pname, GLint value);
-GLAPI void APIENTRY glPathParameterfvNV (GLuint path, GLenum pname, const GLfloat *value);
-GLAPI void APIENTRY glPathParameterfNV (GLuint path, GLenum pname, GLfloat value);
-GLAPI void APIENTRY glPathDashArrayNV (GLuint path, GLsizei dashCount, const GLfloat *dashArray);
-GLAPI void APIENTRY glPathStencilFuncNV (GLenum func, GLint ref, GLuint mask);
-GLAPI void APIENTRY glPathStencilDepthOffsetNV (GLfloat factor, GLfloat units);
-GLAPI void APIENTRY glStencilFillPathNV (GLuint path, GLenum fillMode, GLuint mask);
-GLAPI void APIENTRY glStencilStrokePathNV (GLuint path, GLint reference, GLuint mask);
-GLAPI void APIENTRY glStencilFillPathInstancedNV (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLenum fillMode, GLuint mask, GLenum transformType, const GLfloat *transformValues);
-GLAPI void APIENTRY glStencilStrokePathInstancedNV (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLint reference, GLuint mask, GLenum transformType, const GLfloat *transformValues);
-GLAPI void APIENTRY glPathCoverDepthFuncNV (GLenum func);
-GLAPI void APIENTRY glPathColorGenNV (GLenum color, GLenum genMode, GLenum colorFormat, const GLfloat *coeffs);
-GLAPI void APIENTRY glPathTexGenNV (GLenum texCoordSet, GLenum genMode, GLint components, const GLfloat *coeffs);
-GLAPI void APIENTRY glPathFogGenNV (GLenum genMode);
-GLAPI void APIENTRY glCoverFillPathNV (GLuint path, GLenum coverMode);
-GLAPI void APIENTRY glCoverStrokePathNV (GLuint path, GLenum coverMode);
-GLAPI void APIENTRY glCoverFillPathInstancedNV (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
-GLAPI void APIENTRY glCoverStrokePathInstancedNV (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
-GLAPI void APIENTRY glGetPathParameterivNV (GLuint path, GLenum pname, GLint *value);
-GLAPI void APIENTRY glGetPathParameterfvNV (GLuint path, GLenum pname, GLfloat *value);
-GLAPI void APIENTRY glGetPathCommandsNV (GLuint path, GLubyte *commands);
-GLAPI void APIENTRY glGetPathCoordsNV (GLuint path, GLfloat *coords);
-GLAPI void APIENTRY glGetPathDashArrayNV (GLuint path, GLfloat *dashArray);
-GLAPI void APIENTRY glGetPathMetricsNV (GLbitfield metricQueryMask, GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLsizei stride, GLfloat *metrics);
-GLAPI void APIENTRY glGetPathMetricRangeNV (GLbitfield metricQueryMask, GLuint firstPathName, GLsizei numPaths, GLsizei stride, GLfloat *metrics);
-GLAPI void APIENTRY glGetPathSpacingNV (GLenum pathListMode, GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLfloat advanceScale, GLfloat kerningScale, GLenum transformType, GLfloat *returnedSpacing);
-GLAPI void APIENTRY glGetPathColorGenivNV (GLenum color, GLenum pname, GLint *value);
-GLAPI void APIENTRY glGetPathColorGenfvNV (GLenum color, GLenum pname, GLfloat *value);
-GLAPI void APIENTRY glGetPathTexGenivNV (GLenum texCoordSet, GLenum pname, GLint *value);
-GLAPI void APIENTRY glGetPathTexGenfvNV (GLenum texCoordSet, GLenum pname, GLfloat *value);
-GLAPI GLboolean APIENTRY glIsPointInFillPathNV (GLuint path, GLuint mask, GLfloat x, GLfloat y);
-GLAPI GLboolean APIENTRY glIsPointInStrokePathNV (GLuint path, GLfloat x, GLfloat y);
-GLAPI GLfloat APIENTRY glGetPathLengthNV (GLuint path, GLsizei startSegment, GLsizei numSegments);
-GLAPI GLboolean APIENTRY glPointAlongPathNV (GLuint path, GLsizei startSegment, GLsizei numSegments, GLfloat distance, GLfloat *x, GLfloat *y, GLfloat *tangentX, GLfloat *tangentY);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLuint (APIENTRYP PFNGLGENPATHSNVPROC) (GLsizei range);
-typedef void (APIENTRYP PFNGLDELETEPATHSNVPROC) (GLuint path, GLsizei range);
-typedef GLboolean (APIENTRYP PFNGLISPATHNVPROC) (GLuint path);
-typedef void (APIENTRYP PFNGLPATHCOMMANDSNVPROC) (GLuint path, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-typedef void (APIENTRYP PFNGLPATHCOORDSNVPROC) (GLuint path, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-typedef void (APIENTRYP PFNGLPATHSUBCOMMANDSNVPROC) (GLuint path, GLsizei commandStart, GLsizei commandsToDelete, GLsizei numCommands, const GLubyte *commands, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-typedef void (APIENTRYP PFNGLPATHSUBCOORDSNVPROC) (GLuint path, GLsizei coordStart, GLsizei numCoords, GLenum coordType, const GLvoid *coords);
-typedef void (APIENTRYP PFNGLPATHSTRINGNVPROC) (GLuint path, GLenum format, GLsizei length, const GLvoid *pathString);
-typedef void (APIENTRYP PFNGLPATHGLYPHSNVPROC) (GLuint firstPathName, GLenum fontTarget, const GLvoid *fontName, GLbitfield fontStyle, GLsizei numGlyphs, GLenum type, const GLvoid *charcodes, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
-typedef void (APIENTRYP PFNGLPATHGLYPHRANGENVPROC) (GLuint firstPathName, GLenum fontTarget, const GLvoid *fontName, GLbitfield fontStyle, GLuint firstGlyph, GLsizei numGlyphs, GLenum handleMissingGlyphs, GLuint pathParameterTemplate, GLfloat emScale);
-typedef void (APIENTRYP PFNGLWEIGHTPATHSNVPROC) (GLuint resultPath, GLsizei numPaths, const GLuint *paths, const GLfloat *weights);
-typedef void (APIENTRYP PFNGLCOPYPATHNVPROC) (GLuint resultPath, GLuint srcPath);
-typedef void (APIENTRYP PFNGLINTERPOLATEPATHSNVPROC) (GLuint resultPath, GLuint pathA, GLuint pathB, GLfloat weight);
-typedef void (APIENTRYP PFNGLTRANSFORMPATHNVPROC) (GLuint resultPath, GLuint srcPath, GLenum transformType, const GLfloat *transformValues);
-typedef void (APIENTRYP PFNGLPATHPARAMETERIVNVPROC) (GLuint path, GLenum pname, const GLint *value);
-typedef void (APIENTRYP PFNGLPATHPARAMETERINVPROC) (GLuint path, GLenum pname, GLint value);
-typedef void (APIENTRYP PFNGLPATHPARAMETERFVNVPROC) (GLuint path, GLenum pname, const GLfloat *value);
-typedef void (APIENTRYP PFNGLPATHPARAMETERFNVPROC) (GLuint path, GLenum pname, GLfloat value);
-typedef void (APIENTRYP PFNGLPATHDASHARRAYNVPROC) (GLuint path, GLsizei dashCount, const GLfloat *dashArray);
-typedef void (APIENTRYP PFNGLPATHSTENCILFUNCNVPROC) (GLenum func, GLint ref, GLuint mask);
-typedef void (APIENTRYP PFNGLPATHSTENCILDEPTHOFFSETNVPROC) (GLfloat factor, GLfloat units);
-typedef void (APIENTRYP PFNGLSTENCILFILLPATHNVPROC) (GLuint path, GLenum fillMode, GLuint mask);
-typedef void (APIENTRYP PFNGLSTENCILSTROKEPATHNVPROC) (GLuint path, GLint reference, GLuint mask);
-typedef void (APIENTRYP PFNGLSTENCILFILLPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLenum fillMode, GLuint mask, GLenum transformType, const GLfloat *transformValues);
-typedef void (APIENTRYP PFNGLSTENCILSTROKEPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLint reference, GLuint mask, GLenum transformType, const GLfloat *transformValues);
-typedef void (APIENTRYP PFNGLPATHCOVERDEPTHFUNCNVPROC) (GLenum func);
-typedef void (APIENTRYP PFNGLPATHCOLORGENNVPROC) (GLenum color, GLenum genMode, GLenum colorFormat, const GLfloat *coeffs);
-typedef void (APIENTRYP PFNGLPATHTEXGENNVPROC) (GLenum texCoordSet, GLenum genMode, GLint components, const GLfloat *coeffs);
-typedef void (APIENTRYP PFNGLPATHFOGGENNVPROC) (GLenum genMode);
-typedef void (APIENTRYP PFNGLCOVERFILLPATHNVPROC) (GLuint path, GLenum coverMode);
-typedef void (APIENTRYP PFNGLCOVERSTROKEPATHNVPROC) (GLuint path, GLenum coverMode);
-typedef void (APIENTRYP PFNGLCOVERFILLPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
-typedef void (APIENTRYP PFNGLCOVERSTROKEPATHINSTANCEDNVPROC) (GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLenum coverMode, GLenum transformType, const GLfloat *transformValues);
-typedef void (APIENTRYP PFNGLGETPATHPARAMETERIVNVPROC) (GLuint path, GLenum pname, GLint *value);
-typedef void (APIENTRYP PFNGLGETPATHPARAMETERFVNVPROC) (GLuint path, GLenum pname, GLfloat *value);
-typedef void (APIENTRYP PFNGLGETPATHCOMMANDSNVPROC) (GLuint path, GLubyte *commands);
-typedef void (APIENTRYP PFNGLGETPATHCOORDSNVPROC) (GLuint path, GLfloat *coords);
-typedef void (APIENTRYP PFNGLGETPATHDASHARRAYNVPROC) (GLuint path, GLfloat *dashArray);
-typedef void (APIENTRYP PFNGLGETPATHMETRICSNVPROC) (GLbitfield metricQueryMask, GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLsizei stride, GLfloat *metrics);
-typedef void (APIENTRYP PFNGLGETPATHMETRICRANGENVPROC) (GLbitfield metricQueryMask, GLuint firstPathName, GLsizei numPaths, GLsizei stride, GLfloat *metrics);
-typedef void (APIENTRYP PFNGLGETPATHSPACINGNVPROC) (GLenum pathListMode, GLsizei numPaths, GLenum pathNameType, const GLvoid *paths, GLuint pathBase, GLfloat advanceScale, GLfloat kerningScale, GLenum transformType, GLfloat *returnedSpacing);
-typedef void (APIENTRYP PFNGLGETPATHCOLORGENIVNVPROC) (GLenum color, GLenum pname, GLint *value);
-typedef void (APIENTRYP PFNGLGETPATHCOLORGENFVNVPROC) (GLenum color, GLenum pname, GLfloat *value);
-typedef void (APIENTRYP PFNGLGETPATHTEXGENIVNVPROC) (GLenum texCoordSet, GLenum pname, GLint *value);
-typedef void (APIENTRYP PFNGLGETPATHTEXGENFVNVPROC) (GLenum texCoordSet, GLenum pname, GLfloat *value);
-typedef GLboolean (APIENTRYP PFNGLISPOINTINFILLPATHNVPROC) (GLuint path, GLuint mask, GLfloat x, GLfloat y);
-typedef GLboolean (APIENTRYP PFNGLISPOINTINSTROKEPATHNVPROC) (GLuint path, GLfloat x, GLfloat y);
-typedef GLfloat (APIENTRYP PFNGLGETPATHLENGTHNVPROC) (GLuint path, GLsizei startSegment, GLsizei numSegments);
-typedef GLboolean (APIENTRYP PFNGLPOINTALONGPATHNVPROC) (GLuint path, GLsizei startSegment, GLsizei numSegments, GLfloat distance, GLfloat *x, GLfloat *y, GLfloat *tangentX, GLfloat *tangentY);
-#endif
+#ifndef GL_SGIX_ycrcba
+#define GL_SGIX_ycrcba 1
+#define GL_YCRCB_SGIX                     0x8318
+#define GL_YCRCBA_SGIX                    0x8319
+#endif /* GL_SGIX_ycrcba */
 
-#ifndef GL_AMD_pinned_memory
-#define GL_AMD_pinned_memory 1
-#endif
+#ifndef GL_SGI_color_matrix
+#define GL_SGI_color_matrix 1
+#define GL_COLOR_MATRIX_SGI               0x80B1
+#define GL_COLOR_MATRIX_STACK_DEPTH_SGI   0x80B2
+#define GL_MAX_COLOR_MATRIX_STACK_DEPTH_SGI 0x80B3
+#define GL_POST_COLOR_MATRIX_RED_SCALE_SGI 0x80B4
+#define GL_POST_COLOR_MATRIX_GREEN_SCALE_SGI 0x80B5
+#define GL_POST_COLOR_MATRIX_BLUE_SCALE_SGI 0x80B6
+#define GL_POST_COLOR_MATRIX_ALPHA_SCALE_SGI 0x80B7
+#define GL_POST_COLOR_MATRIX_RED_BIAS_SGI 0x80B8
+#define GL_POST_COLOR_MATRIX_GREEN_BIAS_SGI 0x80B9
+#define GL_POST_COLOR_MATRIX_BLUE_BIAS_SGI 0x80BA
+#define GL_POST_COLOR_MATRIX_ALPHA_BIAS_SGI 0x80BB
+#endif /* GL_SGI_color_matrix */
 
-#ifndef GL_AMD_stencil_operation_extended
-#define GL_AMD_stencil_operation_extended 1
+#ifndef GL_SGI_color_table
+#define GL_SGI_color_table 1
+#define GL_COLOR_TABLE_SGI                0x80D0
+#define GL_POST_CONVOLUTION_COLOR_TABLE_SGI 0x80D1
+#define GL_POST_COLOR_MATRIX_COLOR_TABLE_SGI 0x80D2
+#define GL_PROXY_COLOR_TABLE_SGI          0x80D3
+#define GL_PROXY_POST_CONVOLUTION_COLOR_TABLE_SGI 0x80D4
+#define GL_PROXY_POST_COLOR_MATRIX_COLOR_TABLE_SGI 0x80D5
+#define GL_COLOR_TABLE_SCALE_SGI          0x80D6
+#define GL_COLOR_TABLE_BIAS_SGI           0x80D7
+#define GL_COLOR_TABLE_FORMAT_SGI         0x80D8
+#define GL_COLOR_TABLE_WIDTH_SGI          0x80D9
+#define GL_COLOR_TABLE_RED_SIZE_SGI       0x80DA
+#define GL_COLOR_TABLE_GREEN_SIZE_SGI     0x80DB
+#define GL_COLOR_TABLE_BLUE_SIZE_SGI      0x80DC
+#define GL_COLOR_TABLE_ALPHA_SIZE_SGI     0x80DD
+#define GL_COLOR_TABLE_LUMINANCE_SIZE_SGI 0x80DE
+#define GL_COLOR_TABLE_INTENSITY_SIZE_SGI 0x80DF
+typedef void (APIENTRYP PFNGLCOLORTABLESGIPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *table);
+typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERFVSGIPROC) (GLenum target, GLenum pname, const GLfloat *params);
+typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERIVSGIPROC) (GLenum target, GLenum pname, const GLint *params);
+typedef void (APIENTRYP PFNGLCOPYCOLORTABLESGIPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+typedef void (APIENTRYP PFNGLGETCOLORTABLESGIPROC) (GLenum target, GLenum format, GLenum type, void *table);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVSGIPROC) (GLenum target, GLenum pname, GLfloat *params);
+typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVSGIPROC) (GLenum target, GLenum pname, GLint *params);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glStencilOpValueAMD (GLenum face, GLuint value);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSTENCILOPVALUEAMDPROC) (GLenum face, GLuint value);
-#endif
-
-#ifndef GL_AMD_vertex_shader_viewport_index
-#define GL_AMD_vertex_shader_viewport_index 1
+GLAPI void APIENTRY glColorTableSGI (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const void *table);
+GLAPI void APIENTRY glColorTableParameterfvSGI (GLenum target, GLenum pname, const GLfloat *params);
+GLAPI void APIENTRY glColorTableParameterivSGI (GLenum target, GLenum pname, const GLint *params);
+GLAPI void APIENTRY glCopyColorTableSGI (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width);
+GLAPI void APIENTRY glGetColorTableSGI (GLenum target, GLenum format, GLenum type, void *table);
+GLAPI void APIENTRY glGetColorTableParameterfvSGI (GLenum target, GLenum pname, GLfloat *params);
+GLAPI void APIENTRY glGetColorTableParameterivSGI (GLenum target, GLenum pname, GLint *params);
 #endif
+#endif /* GL_SGI_color_table */
 
-#ifndef GL_AMD_vertex_shader_layer
-#define GL_AMD_vertex_shader_layer 1
-#endif
+#ifndef GL_SGI_texture_color_table
+#define GL_SGI_texture_color_table 1
+#define GL_TEXTURE_COLOR_TABLE_SGI        0x80BC
+#define GL_PROXY_TEXTURE_COLOR_TABLE_SGI  0x80BD
+#endif /* GL_SGI_texture_color_table */
 
-#ifndef GL_NV_bindless_texture
-#define GL_NV_bindless_texture 1
+#ifndef GL_SUNX_constant_data
+#define GL_SUNX_constant_data 1
+#define GL_UNPACK_CONSTANT_DATA_SUNX      0x81D5
+#define GL_TEXTURE_CONSTANT_DATA_SUNX     0x81D6
+typedef void (APIENTRYP PFNGLFINISHTEXTURESUNXPROC) (void);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI GLuint64 APIENTRY glGetTextureHandleNV (GLuint texture);
-GLAPI GLuint64 APIENTRY glGetTextureSamplerHandleNV (GLuint texture, GLuint sampler);
-GLAPI void APIENTRY glMakeTextureHandleResidentNV (GLuint64 handle);
-GLAPI void APIENTRY glMakeTextureHandleNonResidentNV (GLuint64 handle);
-GLAPI GLuint64 APIENTRY glGetImageHandleNV (GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum format);
-GLAPI void APIENTRY glMakeImageHandleResidentNV (GLuint64 handle, GLenum access);
-GLAPI void APIENTRY glMakeImageHandleNonResidentNV (GLuint64 handle);
-GLAPI void APIENTRY glUniformHandleui64NV (GLint location, GLuint64 value);
-GLAPI void APIENTRY glUniformHandleui64vNV (GLint location, GLsizei count, const GLuint64 *value);
-GLAPI void APIENTRY glProgramUniformHandleui64NV (GLuint program, GLint location, GLuint64 value);
-GLAPI void APIENTRY glProgramUniformHandleui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64 *values);
-GLAPI GLboolean APIENTRY glIsTextureHandleResidentNV (GLuint64 handle);
-GLAPI GLboolean APIENTRY glIsImageHandleResidentNV (GLuint64 handle);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef GLuint64 (APIENTRYP PFNGLGETTEXTUREHANDLENVPROC) (GLuint texture);
-typedef GLuint64 (APIENTRYP PFNGLGETTEXTURESAMPLERHANDLENVPROC) (GLuint texture, GLuint sampler);
-typedef void (APIENTRYP PFNGLMAKETEXTUREHANDLERESIDENTNVPROC) (GLuint64 handle);
-typedef void (APIENTRYP PFNGLMAKETEXTUREHANDLENONRESIDENTNVPROC) (GLuint64 handle);
-typedef GLuint64 (APIENTRYP PFNGLGETIMAGEHANDLENVPROC) (GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum format);
-typedef void (APIENTRYP PFNGLMAKEIMAGEHANDLERESIDENTNVPROC) (GLuint64 handle, GLenum access);
-typedef void (APIENTRYP PFNGLMAKEIMAGEHANDLENONRESIDENTNVPROC) (GLuint64 handle);
-typedef void (APIENTRYP PFNGLUNIFORMHANDLEUI64NVPROC) (GLint location, GLuint64 value);
-typedef void (APIENTRYP PFNGLUNIFORMHANDLEUI64VNVPROC) (GLint location, GLsizei count, const GLuint64 *value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMHANDLEUI64NVPROC) (GLuint program, GLint location, GLuint64 value);
-typedef void (APIENTRYP PFNGLPROGRAMUNIFORMHANDLEUI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64 *values);
-typedef GLboolean (APIENTRYP PFNGLISTEXTUREHANDLERESIDENTNVPROC) (GLuint64 handle);
-typedef GLboolean (APIENTRYP PFNGLISIMAGEHANDLERESIDENTNVPROC) (GLuint64 handle);
-#endif
-
-#ifndef GL_NV_shader_atomic_float
-#define GL_NV_shader_atomic_float 1
-#endif
-
-#ifndef GL_AMD_query_buffer_object
-#define GL_AMD_query_buffer_object 1
-#endif
-
-#ifndef GL_NV_compute_program5
-#define GL_NV_compute_program5 1
-#endif
-
-#ifndef GL_NV_shader_storage_buffer_object
-#define GL_NV_shader_storage_buffer_object 1
-#endif
-
-#ifndef GL_NV_shader_atomic_counters
-#define GL_NV_shader_atomic_counters 1
+GLAPI void APIENTRY glFinishTextureSUNX (void);
 #endif
+#endif /* GL_SUNX_constant_data */
 
-#ifndef GL_NV_deep_texture3D
-#define GL_NV_deep_texture3D 1
-#endif
+#ifndef GL_SUN_convolution_border_modes
+#define GL_SUN_convolution_border_modes 1
+#define GL_WRAP_BORDER_SUN                0x81D4
+#endif /* GL_SUN_convolution_border_modes */
 
-#ifndef GL_NVX_conditional_render
-#define GL_NVX_conditional_render 1
+#ifndef GL_SUN_global_alpha
+#define GL_SUN_global_alpha 1
+#define GL_GLOBAL_ALPHA_SUN               0x81D9
+#define GL_GLOBAL_ALPHA_FACTOR_SUN        0x81DA
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORBSUNPROC) (GLbyte factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORSSUNPROC) (GLshort factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORISUNPROC) (GLint factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORFSUNPROC) (GLfloat factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORDSUNPROC) (GLdouble factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUBSUNPROC) (GLubyte factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUSSUNPROC) (GLushort factor);
+typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUISUNPROC) (GLuint factor);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glBeginConditionalRenderNVX (GLuint id);
-GLAPI void APIENTRY glEndConditionalRenderNVX (void);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERNVXPROC) (GLuint id);
-typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERNVXPROC) (void);
+GLAPI void APIENTRY glGlobalAlphaFactorbSUN (GLbyte factor);
+GLAPI void APIENTRY glGlobalAlphaFactorsSUN (GLshort factor);
+GLAPI void APIENTRY glGlobalAlphaFactoriSUN (GLint factor);
+GLAPI void APIENTRY glGlobalAlphaFactorfSUN (GLfloat factor);
+GLAPI void APIENTRY glGlobalAlphaFactordSUN (GLdouble factor);
+GLAPI void APIENTRY glGlobalAlphaFactorubSUN (GLubyte factor);
+GLAPI void APIENTRY glGlobalAlphaFactorusSUN (GLushort factor);
+GLAPI void APIENTRY glGlobalAlphaFactoruiSUN (GLuint factor);
 #endif
+#endif /* GL_SUN_global_alpha */
 
-#ifndef GL_AMD_sparse_texture
-#define GL_AMD_sparse_texture 1
+#ifndef GL_SUN_mesh_array
+#define GL_SUN_mesh_array 1
+#define GL_QUAD_MESH_SUN                  0x8614
+#define GL_TRIANGLE_MESH_SUN              0x8615
+typedef void (APIENTRYP PFNGLDRAWMESHARRAYSSUNPROC) (GLenum mode, GLint first, GLsizei count, GLsizei width);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glTexStorageSparseAMD (GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
-GLAPI void APIENTRY glTextureStorageSparseAMD (GLuint texture, GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLTEXSTORAGESPARSEAMDPROC) (GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
-typedef void (APIENTRYP PFNGLTEXTURESTORAGESPARSEAMDPROC) (GLuint texture, GLenum target, GLenum internalFormat, GLsizei width, GLsizei height, GLsizei depth, GLsizei layers, GLbitfield flags);
+GLAPI void APIENTRY glDrawMeshArraysSUN (GLenum mode, GLint first, GLsizei count, GLsizei width);
 #endif
+#endif /* GL_SUN_mesh_array */
 
-#ifndef GL_AMD_shader_trinary_minmax
-#define GL_AMD_shader_trinary_minmax 1
-#endif
+#ifndef GL_SUN_slice_accum
+#define GL_SUN_slice_accum 1
+#define GL_SLICE_ACCUM_SUN                0x85CC
+#endif /* GL_SUN_slice_accum */
 
-#ifndef GL_INTEL_map_texture
-#define GL_INTEL_map_texture 1
+#ifndef GL_SUN_triangle_list
+#define GL_SUN_triangle_list 1
+#define GL_RESTART_SUN                    0x0001
+#define GL_REPLACE_MIDDLE_SUN             0x0002
+#define GL_REPLACE_OLDEST_SUN             0x0003
+#define GL_TRIANGLE_LIST_SUN              0x81D7
+#define GL_REPLACEMENT_CODE_SUN           0x81D8
+#define GL_REPLACEMENT_CODE_ARRAY_SUN     0x85C0
+#define GL_REPLACEMENT_CODE_ARRAY_TYPE_SUN 0x85C1
+#define GL_REPLACEMENT_CODE_ARRAY_STRIDE_SUN 0x85C2
+#define GL_REPLACEMENT_CODE_ARRAY_POINTER_SUN 0x85C3
+#define GL_R1UI_V3F_SUN                   0x85C4
+#define GL_R1UI_C4UB_V3F_SUN              0x85C5
+#define GL_R1UI_C3F_V3F_SUN               0x85C6
+#define GL_R1UI_N3F_V3F_SUN               0x85C7
+#define GL_R1UI_C4F_N3F_V3F_SUN           0x85C8
+#define GL_R1UI_T2F_V3F_SUN               0x85C9
+#define GL_R1UI_T2F_N3F_V3F_SUN           0x85CA
+#define GL_R1UI_T2F_C4F_N3F_V3F_SUN       0x85CB
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUISUNPROC) (GLuint code);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUSSUNPROC) (GLushort code);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUBSUNPROC) (GLubyte code);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVSUNPROC) (const GLuint *code);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUSVSUNPROC) (const GLushort *code);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUBVSUNPROC) (const GLubyte *code);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEPOINTERSUNPROC) (GLenum type, GLsizei stride, const void **pointer);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glSyncTextureINTEL (GLuint texture);
-GLAPI void APIENTRY glUnmapTexture2DINTEL (GLuint texture, GLint level);
-GLAPI GLvoid* APIENTRY glMapTexture2DINTEL (GLuint texture, GLint level, GLbitfield access, const GLint *stride, const GLenum *layout);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLSYNCTEXTUREINTELPROC) (GLuint texture);
-typedef void (APIENTRYP PFNGLUNMAPTEXTURE2DINTELPROC) (GLuint texture, GLint level);
-typedef GLvoid* (APIENTRYP PFNGLMAPTEXTURE2DINTELPROC) (GLuint texture, GLint level, GLbitfield access, const GLint *stride, const GLenum *layout);
+GLAPI void APIENTRY glReplacementCodeuiSUN (GLuint code);
+GLAPI void APIENTRY glReplacementCodeusSUN (GLushort code);
+GLAPI void APIENTRY glReplacementCodeubSUN (GLubyte code);
+GLAPI void APIENTRY glReplacementCodeuivSUN (const GLuint *code);
+GLAPI void APIENTRY glReplacementCodeusvSUN (const GLushort *code);
+GLAPI void APIENTRY glReplacementCodeubvSUN (const GLubyte *code);
+GLAPI void APIENTRY glReplacementCodePointerSUN (GLenum type, GLsizei stride, const void **pointer);
 #endif
+#endif /* GL_SUN_triangle_list */
 
-#ifndef GL_NV_draw_texture
-#define GL_NV_draw_texture 1
+#ifndef GL_SUN_vertex
+#define GL_SUN_vertex 1
+typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX2FSUNPROC) (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y);
+typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX2FVSUNPROC) (const GLubyte *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX3FSUNPROC) (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX3FVSUNPROC) (const GLubyte *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLCOLOR3FVERTEX3FSUNPROC) (GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLCOLOR3FVERTEX3FVSUNPROC) (const GLfloat *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLNORMAL3FVERTEX3FSUNPROC) (GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *c, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD2FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLTEXCOORD2FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD4FVERTEX4FSUNPROC) (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLTEXCOORD4FVERTEX4FVSUNPROC) (const GLfloat *tc, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4UBVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4UBVERTEX3FVSUNPROC) (const GLfloat *tc, const GLubyte *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD2FNORMAL3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLTEXCOORD2FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLTEXCOORD4FCOLOR4FNORMAL3FVERTEX4FSUNPROC) (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+typedef void (APIENTRYP PFNGLTEXCOORD4FCOLOR4FNORMAL3FVERTEX4FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVERTEX3FSUNPROC) (GLuint rc, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4UBVERTEX3FSUNPROC) (GLuint rc, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4UBVERTEX3FVSUNPROC) (const GLuint *rc, const GLubyte *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR3FVERTEX3FSUNPROC) (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *c, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUINORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUINORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *n, const GLfloat *v);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
 #ifdef GL_GLEXT_PROTOTYPES
-GLAPI void APIENTRY glDrawTextureNV (GLuint texture, GLuint sampler, GLfloat x0, GLfloat y0, GLfloat x1, GLfloat y1, GLfloat z, GLfloat s0, GLfloat t0, GLfloat s1, GLfloat t1);
-#endif /* GL_GLEXT_PROTOTYPES */
-typedef void (APIENTRYP PFNGLDRAWTEXTURENVPROC) (GLuint texture, GLuint sampler, GLfloat x0, GLfloat y0, GLfloat x1, GLfloat y1, GLfloat z, GLfloat s0, GLfloat t0, GLfloat s1, GLfloat t1);
+GLAPI void APIENTRY glColor4ubVertex2fSUN (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y);
+GLAPI void APIENTRY glColor4ubVertex2fvSUN (const GLubyte *c, const GLfloat *v);
+GLAPI void APIENTRY glColor4ubVertex3fSUN (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glColor4ubVertex3fvSUN (const GLubyte *c, const GLfloat *v);
+GLAPI void APIENTRY glColor3fVertex3fSUN (GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glColor3fVertex3fvSUN (const GLfloat *c, const GLfloat *v);
+GLAPI void APIENTRY glNormal3fVertex3fSUN (GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glNormal3fVertex3fvSUN (const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glColor4fNormal3fVertex3fSUN (GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glColor4fNormal3fVertex3fvSUN (const GLfloat *c, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord2fVertex3fSUN (GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glTexCoord2fVertex3fvSUN (const GLfloat *tc, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord4fVertex4fSUN (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glTexCoord4fVertex4fvSUN (const GLfloat *tc, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord2fColor4ubVertex3fSUN (GLfloat s, GLfloat t, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glTexCoord2fColor4ubVertex3fvSUN (const GLfloat *tc, const GLubyte *c, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord2fColor3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glTexCoord2fColor3fVertex3fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord2fNormal3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glTexCoord2fNormal3fVertex3fvSUN (const GLfloat *tc, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord2fColor4fNormal3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glTexCoord2fColor4fNormal3fVertex3fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glTexCoord4fColor4fNormal3fVertex4fSUN (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+GLAPI void APIENTRY glTexCoord4fColor4fNormal3fVertex4fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiVertex3fSUN (GLuint rc, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiVertex3fvSUN (const GLuint *rc, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiColor4ubVertex3fSUN (GLuint rc, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiColor4ubVertex3fvSUN (const GLuint *rc, const GLubyte *c, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiColor3fVertex3fSUN (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiColor3fVertex3fvSUN (const GLuint *rc, const GLfloat *c, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiNormal3fVertex3fSUN (GLuint rc, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiColor4fNormal3fVertex3fSUN (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiColor4fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiTexCoord2fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiTexCoord2fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiTexCoord2fNormal3fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiTexCoord2fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *n, const GLfloat *v);
+GLAPI void APIENTRY glReplacementCodeuiTexCoord2fColor4fNormal3fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z);
+GLAPI void APIENTRY glReplacementCodeuiTexCoord2fColor4fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v);
 #endif
+#endif /* GL_SUN_vertex */
 
+#ifndef GL_WIN_phong_shading
+#define GL_WIN_phong_shading 1
+#define GL_PHONG_WIN                      0x80EA
+#define GL_PHONG_HINT_WIN                 0x80EB
+#endif /* GL_WIN_phong_shading */
+
+#ifndef GL_WIN_specular_fog
+#define GL_WIN_specular_fog 1
+#define GL_FOG_SPECULAR_TEXTURE_WIN       0x80EC
+#endif /* GL_WIN_specular_fog */
 
 #ifdef __cplusplus
 }
diff --git a/src/gui/opengl/qopenglextensions_p.h b/src/gui/opengl/qopenglextensions_p.h
index 265771ce1b..23cfe16467 100644
--- a/src/gui/opengl/qopenglextensions_p.h
+++ b/src/gui/opengl/qopenglextensions_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,18 +49,6 @@
 
 QT_BEGIN_NAMESPACE
 
-
-#if 0
-#ifndef GL_ARB_vertex_buffer_object
-typedef ptrdiff_t GLintptrARB;
-typedef ptrdiff_t GLsizeiptrARB;
-#endif
-#endif
-
-#ifndef GL_VERSION_2_0
-typedef char GLchar;
-#endif
-
 class QOpenGLExtensionsPrivate;
 
 class Q_GUI_EXPORT QOpenGLExtensions : public QOpenGLFunctions
@@ -99,16 +79,17 @@ public:
         Depth24                 = 0x00010000,
         SRGBFrameBuffer         = 0x00020000,
         MapBuffer               = 0x00040000,
-        GeometryShaders         = 0x00080000
+        GeometryShaders         = 0x00080000,
+        MapBufferRange          = 0x00100000,
+        Sized8Formats           = 0x00200000
     };
     Q_DECLARE_FLAGS(OpenGLExtensions, OpenGLExtension)
 
     OpenGLExtensions openGLExtensions();
     bool hasOpenGLExtension(QOpenGLExtensions::OpenGLExtension extension) const;
 
-    void initializeGLExtensions();
-
     GLvoid *glMapBuffer(GLenum target, GLenum access);
+    GLvoid *glMapBufferRange(GLenum target, qopengl_GLintptr offset, qopengl_GLsizeiptr length, GLbitfield access);
     GLboolean glUnmapBuffer(GLenum target);
 
     void glBlitFramebuffer(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,
@@ -133,6 +114,8 @@ public:
     explicit QOpenGLExtensionsPrivate(QOpenGLContext *ctx);
 
     GLvoid* (QOPENGLF_APIENTRYP MapBuffer)(GLenum target, GLenum access);
+    GLvoid* (QOPENGLF_APIENTRYP MapBufferRange)(GLenum target, qopengl_GLintptr offset,
+                                                qopengl_GLsizeiptr length, GLbitfield access);
     GLboolean (QOPENGLF_APIENTRYP UnmapBuffer)(GLenum target);
     void (QOPENGLF_APIENTRYP BlitFramebuffer)(GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,
                            GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
@@ -152,6 +135,16 @@ inline GLvoid *QOpenGLExtensions::glMapBuffer(GLenum target, GLenum access)
     return result;
 }
 
+inline GLvoid *QOpenGLExtensions::glMapBufferRange(GLenum target, qopengl_GLintptr offset,
+                                                   qopengl_GLsizeiptr length, GLbitfield access)
+{
+    Q_D(QOpenGLExtensions);
+    Q_ASSERT(QOpenGLExtensions::isInitialized(d));
+    GLvoid *result = d->MapBufferRange(target, offset, length, access);
+    Q_OPENGL_FUNCTIONS_DEBUG
+    return result;
+}
+
 inline GLboolean QOpenGLExtensions::glUnmapBuffer(GLenum target)
 {
     Q_D(QOpenGLExtensions);
diff --git a/src/gui/opengl/qopenglframebufferobject.cpp b/src/gui/opengl/qopenglframebufferobject.cpp
index 3102e1ecd2..b185e332e6 100644
--- a/src/gui/opengl/qopenglframebufferobject.cpp
+++ b/src/gui/opengl/qopenglframebufferobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -88,6 +80,10 @@ QT_BEGIN_NAMESPACE
 #define GL_DEPTH_COMPONENT24 0x81A6
 #endif
 
+#ifndef GL_DEPTH_COMPONENT24_OES
+#define GL_DEPTH_COMPONENT24_OES 0x81A6
+#endif
+
 #ifndef GL_READ_FRAMEBUFFER
 #define GL_READ_FRAMEBUFFER 0x8CA8
 #endif
@@ -96,6 +92,35 @@ QT_BEGIN_NAMESPACE
 #define GL_DRAW_FRAMEBUFFER 0x8CA9
 #endif
 
+#ifndef GL_RGB8
+#define GL_RGB8                           0x8051
+#endif
+
+#ifndef GL_RGB10
+#define GL_RGB10                          0x8052
+#endif
+
+#ifndef GL_RGBA8
+#define GL_RGBA8                          0x8058
+#endif
+
+#ifndef GL_RGB10_A2
+#define GL_RGB10_A2                       0x8059
+#endif
+
+#ifndef GL_BGRA
+#define GL_BGRA                           0x80E1
+#endif
+
+#ifndef GL_UNSIGNED_INT_8_8_8_8_REV
+#define GL_UNSIGNED_INT_8_8_8_8_REV       0x8367
+#endif
+
+#ifndef GL_UNSIGNED_INT_2_10_10_10_REV
+#define GL_UNSIGNED_INT_2_10_10_10_REV    0x8368
+#endif
+
+
 /*!
     \class QOpenGLFramebufferObjectFormat
     \brief The QOpenGLFramebufferObjectFormat class specifies the format of an OpenGL
@@ -423,19 +448,16 @@ void QOpenGLFramebufferObjectPrivate::init(QOpenGLFramebufferObject *, const QSi
     if (!funcs.hasOpenGLFeature(QOpenGLFunctions::Framebuffers))
         return;
 
-
     // Fall back to using a normal non-msaa FBO if we don't have support for MSAA
     if (!funcs.hasOpenGLExtension(QOpenGLExtensions::FramebufferMultisample)
             || !funcs.hasOpenGLExtension(QOpenGLExtensions::FramebufferBlit)) {
         samples = 0;
+    } else if (!ctx->isOpenGLES() || ctx->format().majorVersion() >= 3) {
+        GLint maxSamples;
+        funcs.glGetIntegerv(GL_MAX_SAMPLES, &maxSamples);
+        samples = qBound(0, int(samples), int(maxSamples));
     }
 
-#ifndef QT_OPENGL_ES_2
-    GLint maxSamples;
-    funcs.glGetIntegerv(GL_MAX_SAMPLES, &maxSamples);
-    samples = qBound(0, int(samples), int(maxSamples));
-#endif
-
     samples = qMax(0, samples);
     requestedSamples = samples;
     size = sz;
@@ -455,13 +477,15 @@ void QOpenGLFramebufferObjectPrivate::init(QOpenGLFramebufferObject *, const QSi
         initTexture(texture_target, internal_format, size, mipmap);
     } else {
         GLenum storageFormat = internal_format;
+        // ES requires a sized format. The older desktop extension does not. Correct the format on ES.
+        if (ctx->isOpenGLES() && internal_format == GL_RGBA) {
 #ifdef GL_RGBA8_OES
-        // Correct the internal format used by the render buffer when using ANGLE
-        if (QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGLES && internal_format == GL_RGBA
-                && strstr((const char *)funcs.glGetString(GL_RENDERER), "ANGLE") != 0) {
-            storageFormat = GL_RGBA8_OES;
-        }
+            if (funcs.hasOpenGLExtension(QOpenGLExtensions::Sized8Formats))
+                storageFormat = GL_RGBA8_OES;
+            else
 #endif
+                storageFormat = GL_RGBA4;
+        }
 
         mipmap = false;
         funcs.glGenRenderbuffers(1, &color_buffer);
@@ -488,7 +512,6 @@ void QOpenGLFramebufferObjectPrivate::init(QOpenGLFramebufferObject *, const QSi
 
     initAttachments(ctx, attachment);
 
-    funcs.glBindFramebuffer(GL_FRAMEBUFFER, ctx->d_func()->current_fbo);
     if (valid) {
         fbo_guard = new QOpenGLSharedResourceGuard(ctx, fbo, freeFramebufferFunc);
     } else {
@@ -518,8 +541,12 @@ void QOpenGLFramebufferObjectPrivate::initTexture(GLenum target, GLenum internal
     funcs.glTexParameteri(target, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
     funcs.glTexParameteri(target, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
 
+    GLuint pixelType = GL_UNSIGNED_BYTE;
+    if (internal_format == GL_RGB10_A2 || internal_format == GL_RGB10)
+        pixelType = GL_UNSIGNED_INT_2_10_10_10_REV;
+
     funcs.glTexImage2D(target, 0, internal_format, size.width(), size.height(), 0,
-                       GL_RGBA, GL_UNSIGNED_BYTE, NULL);
+                       GL_RGBA, pixelType, NULL);
     if (mipmap) {
         int width = size.width();
         int height = size.height();
@@ -529,7 +556,7 @@ void QOpenGLFramebufferObjectPrivate::initTexture(GLenum target, GLenum internal
             height = qMax(1, height >> 1);
             ++level;
             funcs.glTexImage2D(target, level, internal_format, width, height, 0,
-                               GL_RGBA, GL_UNSIGNED_BYTE, NULL);
+                               GL_RGBA, pixelType, NULL);
         }
     }
     funcs.glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
@@ -975,8 +1002,6 @@ bool QOpenGLFramebufferObject::bind()
         d->valid = d->checkFramebufferStatus(current);
     else
         d->initTexture(d->format.textureTarget(), d->format.internalTextureFormat(), d->size, d->format.mipmap());
-    if (d->valid && current)
-        current->d_func()->current_fbo = d->fbo();
     return d->valid;
 }
 
@@ -1004,10 +1029,8 @@ bool QOpenGLFramebufferObject::release()
         qWarning("QOpenGLFramebufferObject::release() called from incompatible context");
 #endif
 
-    if (current) {
-        current->d_func()->current_fbo = current->defaultFramebufferObject();
-        d->funcs.glBindFramebuffer(GL_FRAMEBUFFER, current->d_func()->current_fbo);
-    }
+    if (current)
+        d->funcs.glBindFramebuffer(GL_FRAMEBUFFER, current->defaultFramebufferObject());
 
     return true;
 }
@@ -1054,7 +1077,7 @@ GLuint QOpenGLFramebufferObject::takeTexture()
     GLuint id = 0;
     if (isValid() && d->texture_guard) {
         QOpenGLContext *current = QOpenGLContext::currentContext();
-        if (current && current->shareGroup() == d->fbo_guard->group() && current->d_func()->current_fbo == d->fbo())
+        if (current && current->shareGroup() == d->fbo_guard->group() && isBound())
             release();
         id = d->texture_guard->id();
         // Do not call free() on texture_guard, just null it out.
@@ -1097,47 +1120,114 @@ QOpenGLFramebufferObjectFormat QOpenGLFramebufferObject::format() const
     return d->format;
 }
 
-Q_GUI_EXPORT QImage qt_gl_read_framebuffer(const QSize &size, bool alpha_format, bool include_alpha)
+static inline QImage qt_gl_read_framebuffer_rgba8(const QSize &size, bool include_alpha, QOpenGLContext *context)
 {
-    int w = size.width();
-    int h = size.height();
-
-    QOpenGLFunctions *funcs = QOpenGLContext::currentContext()->functions();
-    while (funcs->glGetError());
+    QOpenGLFunctions *funcs = context->functions();
+    const int w = size.width();
+    const int h = size.height();
+    bool isOpenGL12orBetter = !context->isOpenGLES() && (context->format().majorVersion() >= 2 || context->format().minorVersion() >= 2);
+    if (isOpenGL12orBetter) {
+        QImage img(size, include_alpha ? QImage::Format_ARGB32_Premultiplied : QImage::Format_RGB32);
+        funcs->glReadPixels(0, 0, w, h, GL_BGRA, GL_UNSIGNED_INT_8_8_8_8_REV, img.bits());
+        return img;
+    }
 
 #if Q_BYTE_ORDER == Q_LITTLE_ENDIAN
-    QImage img(size, (alpha_format && include_alpha) ? QImage::Format_ARGB32_Premultiplied
-                                                     : QImage::Format_RGB32);
-#ifdef QT_OPENGL_ES
-    GLint fmt = GL_BGRA_EXT;
-#else
-    GLint fmt = GL_BGRA;
-#endif
-    funcs->glReadPixels(0, 0, w, h, fmt, GL_UNSIGNED_BYTE, img.bits());
-    if (!funcs->glGetError())
-        return img.mirrored();
+    // Without GL_UNSIGNED_INT_8_8_8_8_REV, GL_BGRA only makes sense on little endian.
+    const bool supports_bgra = context->isOpenGLES()
+            ? context->hasExtension(QByteArrayLiteral("GL_EXT_read_format_bgra"))
+            : context->hasExtension(QByteArrayLiteral("GL_EXT_bgra"));
+    if (supports_bgra) {
+        QImage img(size, include_alpha ? QImage::Format_ARGB32_Premultiplied : QImage::Format_RGB32);
+        funcs->glReadPixels(0, 0, w, h, GL_BGRA, GL_UNSIGNED_BYTE, img.bits());
+        return img;
+    }
 #endif
-
-    QImage rgbaImage(size, (alpha_format && include_alpha) ? QImage::Format_RGBA8888_Premultiplied
-                                                           : QImage::Format_RGBX8888);
+    QImage rgbaImage(size, include_alpha ? QImage::Format_RGBA8888_Premultiplied : QImage::Format_RGBX8888);
     funcs->glReadPixels(0, 0, w, h, GL_RGBA, GL_UNSIGNED_BYTE, rgbaImage.bits());
-    return rgbaImage.mirrored();
+    return rgbaImage;
+}
+
+static inline QImage qt_gl_read_framebuffer_rgb10a2(const QSize &size, bool include_alpha, QOpenGLContext *context)
+{
+    // We assume OpenGL 1.2+ or ES 3.0+ here.
+    QImage img(size, include_alpha ? QImage::Format_A2BGR30_Premultiplied : QImage::Format_BGR30);
+    context->functions()->glReadPixels(0, 0, size.width(), size.height(), GL_RGBA, GL_UNSIGNED_INT_2_10_10_10_REV, img.bits());
+    return img;
+}
+
+static QImage qt_gl_read_framebuffer(const QSize &size, GLenum internal_format, bool include_alpha, bool flip)
+{
+    QOpenGLContext *ctx = QOpenGLContext::currentContext();
+    QOpenGLFunctions *funcs = ctx->functions();
+    while (funcs->glGetError());
+
+    switch (internal_format) {
+    case GL_RGB:
+    case GL_RGB8:
+        return qt_gl_read_framebuffer_rgba8(size, false, ctx).mirrored(false, flip);
+    case GL_RGB10:
+        return qt_gl_read_framebuffer_rgb10a2(size, false, ctx).mirrored(false, flip);
+    case GL_RGB10_A2:
+        return qt_gl_read_framebuffer_rgb10a2(size, include_alpha, ctx).mirrored(false, flip);
+    case GL_RGBA:
+    case GL_RGBA8:
+    default:
+        return qt_gl_read_framebuffer_rgba8(size, include_alpha, ctx).mirrored(false, flip);
+    }
+
+    Q_UNREACHABLE();
+    return QImage();
+}
+
+Q_GUI_EXPORT QImage qt_gl_read_framebuffer(const QSize &size, bool alpha_format, bool include_alpha)
+{
+    return qt_gl_read_framebuffer(size, alpha_format ? GL_RGBA : GL_RGB, include_alpha, true);
 }
 
 /*!
-    \fn QImage QOpenGLFramebufferObject::toImage() const
+    \fn QImage QOpenGLFramebufferObject::toImage(bool flipped) const
 
     Returns the contents of this framebuffer object as a QImage.
 
+    If \a flipped is true the image is flipped from OpenGL coordinates to raster coordinates.
+    If used together with QOpenGLPaintDevice, \a flipped should be the opposite of the value
+    of QOpenGLPaintDevice::paintFlipped().
+
     Will try to return a premultiplied ARBG32 or RGB32 image. Since 5.2 it will fall back to
-    a premultiplied RGBA8888 or RGBx8888 image when reading to ARGB32 is not supported.
+    a premultiplied RGBA8888 or RGBx8888 image when reading to ARGB32 is not supported. Since 5.4 an
+    A2BGR30 image is returned if the internal format is RGB10_A2.
+
+    For multisampled framebuffer objects the samples are resolved using the
+    \c{GL_EXT_framebuffer_blit} extension. If the extension is not available, the contents
+    of the returned image is undefined.
+
+    For singlesampled framebuffers the contents is retrieved via \c glReadPixels. This is
+    a potentially expensive and inefficient operation. Therefore it is recommended that
+    this function is used as seldom as possible.
+
+    \sa QOpenGLPaintDevice::paintFlipped()
 */
-QImage QOpenGLFramebufferObject::toImage() const
+
+QImage QOpenGLFramebufferObject::toImage(bool flipped) const
 {
     Q_D(const QOpenGLFramebufferObject);
     if (!d->valid)
         return QImage();
 
+    QOpenGLContext *ctx = QOpenGLContext::currentContext();
+    if (!ctx) {
+        qWarning("QOpenGLFramebufferObject::toImage() called without a current context");
+        return QImage();
+    }
+
+    GLuint prevFbo = 0;
+    ctx->functions()->glGetIntegerv(GL_FRAMEBUFFER_BINDING, (GLint *) &prevFbo);
+
+    if (prevFbo != d->fbo())
+        const_cast<QOpenGLFramebufferObject *>(this)->bind();
+
+    QImage image;
     // qt_gl_read_framebuffer doesn't work on a multisample FBO
     if (format().samples() != 0) {
         QOpenGLFramebufferObject temp(size(), QOpenGLFramebufferObjectFormat());
@@ -1145,20 +1235,31 @@ QImage QOpenGLFramebufferObject::toImage() const
         QRect rect(QPoint(0, 0), size());
         blitFramebuffer(&temp, rect, const_cast<QOpenGLFramebufferObject *>(this), rect);
 
-        return temp.toImage();
+        image = temp.toImage(flipped);
+    } else {
+        image = qt_gl_read_framebuffer(d->size, format().internalTextureFormat(), true, flipped);
     }
 
-    bool wasBound = isBound();
-    if (!wasBound)
-        const_cast<QOpenGLFramebufferObject *>(this)->bind();
-    QImage image = qt_gl_read_framebuffer(d->size, format().internalTextureFormat() != GL_RGB, true);
-    if (!wasBound)
-        const_cast<QOpenGLFramebufferObject *>(this)->release();
+    if (prevFbo != d->fbo())
+        ctx->functions()->glBindFramebuffer(GL_FRAMEBUFFER, prevFbo);
 
     return image;
 }
 
 /*!
+    \fn QImage QOpenGLFramebufferObject::toImage() const
+    \overload
+
+    Returns the contents of this framebuffer object as a QImage. This method flips
+    the image from OpenGL coordinates to raster coordinates.
+*/
+// ### Qt 6: Remove this method and make it a default argument instead.
+QImage QOpenGLFramebufferObject::toImage() const
+{
+    return toImage(true);
+}
+
+/*!
     \fn bool QOpenGLFramebufferObject::bindDefault()
 
     Switches rendering back to the default, windowing system provided
@@ -1170,16 +1271,13 @@ QImage QOpenGLFramebufferObject::toImage() const
 bool QOpenGLFramebufferObject::bindDefault()
 {
     QOpenGLContext *ctx = const_cast<QOpenGLContext *>(QOpenGLContext::currentContext());
-    QOpenGLFunctions functions(ctx);
 
-    if (ctx) {
-        ctx->d_func()->current_fbo = ctx->defaultFramebufferObject();
-        functions.glBindFramebuffer(GL_FRAMEBUFFER, ctx->d_func()->current_fbo);
+    if (ctx)
+        ctx->functions()->glBindFramebuffer(GL_FRAMEBUFFER, ctx->defaultFramebufferObject());
 #ifdef QT_DEBUG
-    } else {
+    else
         qWarning("QOpenGLFramebufferObject::bindDefault() called without current context.");
 #endif
-    }
 
     return ctx != 0;
 }
@@ -1192,7 +1290,7 @@ bool QOpenGLFramebufferObject::bindDefault()
 */
 bool QOpenGLFramebufferObject::hasOpenGLFramebufferObjects()
 {
-    return QOpenGLFunctions(QOpenGLContext::currentContext()).hasOpenGLFeature(QOpenGLFunctions::Framebuffers);
+    return QOpenGLContext::currentContext()->functions()->hasOpenGLFeature(QOpenGLFunctions::Framebuffers);
 }
 
 /*!
@@ -1228,6 +1326,8 @@ QOpenGLFramebufferObject::Attachment QOpenGLFramebufferObject::attachment() cons
 
     This can be used to free or reattach the depth and stencil buffer
     attachments as needed.
+
+    \note This function alters the current framebuffer binding.
  */
 void QOpenGLFramebufferObject::setAttachment(QOpenGLFramebufferObject::Attachment attachment)
 {
@@ -1243,20 +1343,21 @@ void QOpenGLFramebufferObject::setAttachment(QOpenGLFramebufferObject::Attachmen
 #endif
     d->funcs.glBindFramebuffer(GL_FRAMEBUFFER, d->fbo());
     d->initAttachments(current, attachment);
-    if (current->d_func()->current_fbo != d->fbo())
-        d->funcs.glBindFramebuffer(GL_FRAMEBUFFER, current->d_func()->current_fbo);
 }
 
 /*!
-    Returns \c true if the framebuffer object is currently bound to a context,
+    Returns \c true if the framebuffer object is currently bound to the current context,
     otherwise false is returned.
 */
-
 bool QOpenGLFramebufferObject::isBound() const
 {
     Q_D(const QOpenGLFramebufferObject);
-    QOpenGLContext *current = QOpenGLContext::currentContext();
-    return current ? current->d_func()->current_fbo == d->fbo() : false;
+    QOpenGLContext *ctx = QOpenGLContext::currentContext();
+    if (!ctx)
+        return false;
+    GLint fbo = 0;
+    ctx->functions()->glGetIntegerv(GL_FRAMEBUFFER_BINDING, &fbo);
+    return GLuint(fbo) == d->fbo();
 }
 
 /*!
@@ -1310,6 +1411,9 @@ void QOpenGLFramebufferObject::blitFramebuffer(QOpenGLFramebufferObject *target,
     If \a source or \a target is 0, the default framebuffer will be used
     instead of a framebuffer object as source or target respectively.
 
+    This function will have no effect unless hasOpenGLFramebufferBlit() returns
+    true.
+
     The \a buffers parameter should be a mask consisting of any combination of
     \c GL_COLOR_BUFFER_BIT, \c GL_DEPTH_BUFFER_BIT, and
     \c GL_STENCIL_BUFFER_BIT.  Any buffer type that is not present both
@@ -1326,10 +1430,7 @@ void QOpenGLFramebufferObject::blitFramebuffer(QOpenGLFramebufferObject *target,
     have different sizes. The sizes must also be the same if any of the
     framebuffer objects are multisample framebuffers.
 
-    Note that the scissor test will restrict the blit area if enabled.
-
-    This function will have no effect unless hasOpenGLFramebufferBlit() returns
-    true.
+    \note The scissor test will restrict the blit area if enabled.
 
     \sa hasOpenGLFramebufferBlit()
 */
@@ -1346,6 +1447,9 @@ void QOpenGLFramebufferObject::blitFramebuffer(QOpenGLFramebufferObject *target,
     if (!extensions.hasOpenGLExtension(QOpenGLExtensions::FramebufferBlit))
         return;
 
+    GLuint prevFbo = 0;
+    ctx->functions()->glGetIntegerv(GL_FRAMEBUFFER_BINDING, (GLint *) &prevFbo);
+
     const int sx0 = sourceRect.left();
     const int sx1 = sourceRect.left() + sourceRect.width();
     const int sy0 = sourceRect.top();
@@ -1363,7 +1467,7 @@ void QOpenGLFramebufferObject::blitFramebuffer(QOpenGLFramebufferObject *target,
                                  tx0, ty0, tx1, ty1,
                                  buffers, filter);
 
-    extensions.glBindFramebuffer(GL_FRAMEBUFFER, ctx->d_func()->current_fbo);
+    ctx->functions()->glBindFramebuffer(GL_FRAMEBUFFER, prevFbo); // sets both READ and DRAW
 }
 
 QT_END_NAMESPACE
diff --git a/src/gui/opengl/qopenglframebufferobject.h b/src/gui/opengl/qopenglframebufferobject.h
index 3df929c210..fbcec53335 100644
--- a/src/gui/opengl/qopenglframebufferobject.h
+++ b/src/gui/opengl/qopenglframebufferobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -94,6 +86,7 @@ public:
     GLuint takeTexture();
     QSize size() const;
     QImage toImage() const;
+    QImage toImage(bool flipped) const;
     Attachment attachment() const;
 
     void setAttachment(Attachment attachment);
diff --git a/src/gui/opengl/qopenglframebufferobject_p.h b/src/gui/opengl/qopenglframebufferobject_p.h
index 75348d1481..043e7af8cc 100644
--- a/src/gui/opengl/qopenglframebufferobject_p.h
+++ b/src/gui/opengl/qopenglframebufferobject_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglfunctions.cpp b/src/gui/opengl/qopenglfunctions.cpp
index bc4a714c6c..44b56699df 100644
--- a/src/gui/opengl/qopenglfunctions.cpp
+++ b/src/gui/opengl/qopenglfunctions.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,6 +39,10 @@
 #include <QtGui/private/qguiapplication_p.h>
 #include <qpa/qplatformintegration.h>
 
+#ifndef GL_FRAMEBUFFER_SRGB_CAPABLE_EXT
+#define GL_FRAMEBUFFER_SRGB_CAPABLE_EXT   0x8DBA
+#endif
+
 QT_BEGIN_NAMESPACE
 
 /*!
@@ -126,6 +122,18 @@ QT_BEGIN_NAMESPACE
     glFuncs.glActiveTexture(GL_TEXTURE1);
     \endcode
 
+    An alternative approach is to query the context's associated
+    QOpenGLFunctions instance. This is somewhat faster than the previous
+    approach due to avoiding the creation of a new instance, but the difference
+    is fairly small since the internal data structures are shared, and function
+    resolving happens only once for a given context, regardless of the number of
+    QOpenGLFunctions instances initialized for it.
+
+    \code
+    QOpenGLFunctions *glFuncs = QOpenGLContext::currentContext()->functions();
+    glFuncs->glActiveTexture(GL_TEXTURE1);
+    \endcode
+
     QOpenGLFunctions provides wrappers for all OpenGL ES 2.0
     functions, including the common subset of OpenGL 1.x and ES
     2.0. While such functions, for example glClear() or
@@ -348,8 +356,6 @@ static int qt_gl_resolve_extensions()
         extensions |= QOpenGLExtensions::BGRATextureFormat;
     if (extensionMatcher.match("GL_ARB_texture_rectangle"))
         extensions |= QOpenGLExtensions::TextureRectangle;
-    if (extensionMatcher.match("GL_SGIS_generate_mipmap"))
-        extensions |= QOpenGLExtensions::GenerateMipmap;
     if (extensionMatcher.match("GL_ARB_texture_compression"))
         extensions |= QOpenGLExtensions::TextureCompression;
     if (extensionMatcher.match("GL_EXT_texture_compression_s3tc"))
@@ -372,32 +378,56 @@ static int qt_gl_resolve_extensions()
     if (ctx->isOpenGLES()) {
         if (format.majorVersion() >= 2)
             extensions |= QOpenGLExtensions::GenerateMipmap;
+
+        if (format.majorVersion() >= 3) {
+            extensions |= QOpenGLExtensions::PackedDepthStencil
+                | QOpenGLExtensions::Depth24
+                | QOpenGLExtensions::ElementIndexUint
+                | QOpenGLExtensions::MapBufferRange
+                | QOpenGLExtensions::FramebufferBlit
+                | QOpenGLExtensions::FramebufferMultisample
+                | QOpenGLExtensions::Sized8Formats;
+        } else {
+            // Recognize features by extension name.
+            if (extensionMatcher.match("GL_OES_packed_depth_stencil"))
+                extensions |= QOpenGLExtensions::PackedDepthStencil;
+            if (extensionMatcher.match("GL_OES_depth24"))
+                extensions |= QOpenGLExtensions::Depth24;
+            if (extensionMatcher.match("GL_ANGLE_framebuffer_blit"))
+                extensions |= QOpenGLExtensions::FramebufferBlit;
+            if (extensionMatcher.match("GL_ANGLE_framebuffer_multisample"))
+                extensions |= QOpenGLExtensions::FramebufferMultisample;
+            if (extensionMatcher.match("GL_NV_framebuffer_blit"))
+                extensions |= QOpenGLExtensions::FramebufferBlit;
+            if (extensionMatcher.match("GL_NV_framebuffer_multisample"))
+                extensions |= QOpenGLExtensions::FramebufferMultisample;
+            if (extensionMatcher.match("GL_OES_rgb8_rgba8"))
+                extensions |= QOpenGLExtensions::Sized8Formats;
+        }
+
         if (extensionMatcher.match("GL_OES_mapbuffer"))
             extensions |= QOpenGLExtensions::MapBuffer;
-        if (extensionMatcher.match("GL_OES_packed_depth_stencil"))
-            extensions |= QOpenGLExtensions::PackedDepthStencil;
         if (extensionMatcher.match("GL_OES_element_index_uint"))
             extensions |= QOpenGLExtensions::ElementIndexUint;
-        if (extensionMatcher.match("GL_OES_depth24"))
-            extensions |= QOpenGLExtensions::Depth24;
-        // TODO: Consider matching GL_APPLE_texture_format_BGRA8888 as well, but it needs testing.
+        // We don't match GL_APPLE_texture_format_BGRA8888 here because it has different semantics.
         if (extensionMatcher.match("GL_IMG_texture_format_BGRA8888") || extensionMatcher.match("GL_EXT_texture_format_BGRA8888"))
             extensions |= QOpenGLExtensions::BGRATextureFormat;
-        if (extensionMatcher.match("GL_ANGLE_framebuffer_blit"))
-            extensions |= QOpenGLExtensions::FramebufferBlit;
-        if (extensionMatcher.match("GL_ANGLE_framebuffer_multisample"))
-            extensions |= QOpenGLExtensions::FramebufferMultisample;
     } else {
         extensions |= QOpenGLExtensions::ElementIndexUint | QOpenGLExtensions::MapBuffer;
 
-        // Recognize features by extension name.
-        if (format.majorVersion() >= 3
-            || extensionMatcher.match("GL_ARB_framebuffer_object"))
-        {
-            extensions |= QOpenGLExtensions::FramebufferMultisample |
-                QOpenGLExtensions::FramebufferBlit |
-                QOpenGLExtensions::PackedDepthStencil;
+        if (format.version() >= qMakePair(1, 2))
+            extensions |= QOpenGLExtensions::BGRATextureFormat;
+
+        if (format.version() >= qMakePair(1, 4) || extensionMatcher.match("GL_SGIS_generate_mipmap"))
+            extensions |= QOpenGLExtensions::GenerateMipmap;
+
+        if (format.majorVersion() >= 3 || extensionMatcher.match("GL_ARB_framebuffer_object")) {
+            extensions |= QOpenGLExtensions::FramebufferMultisample
+                | QOpenGLExtensions::FramebufferBlit
+                | QOpenGLExtensions::PackedDepthStencil
+                | QOpenGLExtensions::Sized8Formats;
         } else {
+            // Recognize features by extension name.
             if (extensionMatcher.match("GL_EXT_framebuffer_multisample"))
                 extensions |= QOpenGLExtensions::FramebufferMultisample;
             if (extensionMatcher.match("GL_EXT_framebuffer_blit"))
@@ -405,19 +435,20 @@ static int qt_gl_resolve_extensions()
             if (extensionMatcher.match("GL_EXT_packed_depth_stencil"))
                 extensions |= QOpenGLExtensions::PackedDepthStencil;
         }
-    }
 
-    if (format.renderableType() == QSurfaceFormat::OpenGL && format.version() >= qMakePair(3, 2))
-        extensions |= QOpenGLExtensions::GeometryShaders;
+        if (format.version() >= qMakePair(3, 2) || extensionMatcher.match("GL_ARB_geometry_shader4"))
+            extensions |= QOpenGLExtensions::GeometryShaders;
+
+        if (extensionMatcher.match("GL_ARB_map_buffer_range"))
+            extensions |= QOpenGLExtensions::MapBufferRange;
 
-#ifndef QT_OPENGL_ES
-    if (extensionMatcher.match("GL_EXT_framebuffer_sRGB")) {
-        GLboolean srgbCapableFramebuffers = false;
-        ctx->functions()->glGetBooleanv(GL_FRAMEBUFFER_SRGB_CAPABLE_EXT, &srgbCapableFramebuffers);
-        if (srgbCapableFramebuffers)
-            extensions |= QOpenGLExtensions::SRGBFrameBuffer;
+        if (extensionMatcher.match("GL_EXT_framebuffer_sRGB")) {
+            GLboolean srgbCapableFramebuffers = false;
+            ctx->functions()->glGetBooleanv(GL_FRAMEBUFFER_SRGB_CAPABLE_EXT, &srgbCapableFramebuffers);
+            if (srgbCapableFramebuffers)
+                extensions |= QOpenGLExtensions::SRGBFrameBuffer;
+        }
     }
-#endif
 
     return extensions;
 }
@@ -2027,7 +2058,9 @@ namespace {
 enum ResolvePolicy
 {
     ResolveOES = 0x1,
-    ResolveEXT = 0x2
+    ResolveEXT = 0x2,
+    ResolveANGLE = 0x4,
+    ResolveNV = 0x8
 };
 
 template <typename Base, typename FuncType, int Policy, typename ReturnType>
@@ -2149,6 +2182,12 @@ private:
     if ((Policy & ResolveEXT) && !(funcs->*funcPointerName)) \
         funcs->*funcPointerName = (FuncType)context->getProcAddress(funcName + "EXT"); \
  \
+    if ((Policy & ResolveANGLE) && !(funcs->*funcPointerName)) \
+        funcs->*funcPointerName = (FuncType)context->getProcAddress(funcName + "ANGLE"); \
+ \
+    if ((Policy & ResolveNV) && !(funcs->*funcPointerName)) \
+        funcs->*funcPointerName = (FuncType)context->getProcAddress(funcName + "NV"); \
+ \
     if (!alternateFuncName.isEmpty() && !(funcs->*funcPointerName)) { \
         funcs->*funcPointerName = (FuncType)context->getProcAddress(alternateFuncName); \
  \
@@ -2160,6 +2199,12 @@ private:
  \
         if ((Policy & ResolveEXT) && !(funcs->*funcPointerName)) \
             funcs->*funcPointerName = (FuncType)context->getProcAddress(alternateFuncName + "EXT"); \
+ \
+        if ((Policy & ResolveANGLE) && !(funcs->*funcPointerName)) \
+            funcs->*funcPointerName = (FuncType)context->getProcAddress(funcName + "ANGLE"); \
+ \
+        if ((Policy & ResolveNV) && !(funcs->*funcPointerName)) \
+            funcs->*funcPointerName = (FuncType)context->getProcAddress(funcName + "NV"); \
     }
 
 #define RESOLVER_COMMON_NON_VOID \
@@ -3144,11 +3189,36 @@ static void QOPENGLF_APIENTRY qopenglfResolveVertexAttribPointer(GLuint indx, GL
 
 static GLvoid *QOPENGLF_APIENTRY qopenglfResolveMapBuffer(GLenum target, GLenum access)
 {
+#ifdef QT_OPENGL_ES_3
+    // It is possible that GL_OES_map_buffer is present, but then having to
+    // differentiate between glUnmapBufferOES and glUnmapBuffer causes extra
+    // headache. QOpenGLBuffer::map() will handle this automatically, while direct
+    // calls are better off with migrating to the standard glMapBufferRange.
+    if (QOpenGLContext::currentContext()->format().majorVersion() >= 3) {
+        qWarning("QOpenGLFunctions: glMapBuffer is not available in OpenGL ES 3.0 and up. Use glMapBufferRange instead.");
+        return 0;
+    } else
+#endif
     RESOLVE_FUNC(GLvoid *, ResolveOES, MapBuffer)(target, access);
 }
 
+static GLvoid *QOPENGLF_APIENTRY qopenglfResolveMapBufferRange(GLenum target, qopengl_GLintptr offset, qopengl_GLsizeiptr length, GLbitfield access)
+{
+#ifdef QT_OPENGL_ES_3
+    if (QOpenGLContext::currentContext()->format().majorVersion() >= 3)
+        return ::glMapBufferRange(target, offset, length, access);
+    else
+#endif
+    RESOLVE_FUNC(GLvoid *, 0, MapBufferRange)(target, offset, length, access);
+}
+
 static GLboolean QOPENGLF_APIENTRY qopenglfResolveUnmapBuffer(GLenum target)
 {
+#ifdef QT_OPENGL_ES_3
+    if (QOpenGLContext::currentContext()->format().majorVersion() >= 3)
+        return ::glUnmapBuffer(target);
+    else
+#endif
     RESOLVE_FUNC(GLboolean, ResolveOES, UnmapBuffer)(target);
 }
 
@@ -3156,7 +3226,12 @@ static void QOPENGLF_APIENTRY qopenglfResolveBlitFramebuffer(GLint srcX0, GLint
                        GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
                        GLbitfield mask, GLenum filter)
 {
-    RESOLVE_FUNC_VOID_WITH_ALTERNATE(ResolveEXT, BlitFramebuffer, BlitFramebufferANGLE)
+#ifdef QT_OPENGL_ES_3
+    if (QOpenGLContext::currentContext()->format().majorVersion() >= 3)
+        ::glBlitFramebuffer(srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1, mask, filter);
+    else
+#endif
+    RESOLVE_FUNC_VOID(ResolveEXT | ResolveANGLE | ResolveNV, BlitFramebuffer)
         (srcX0, srcY0, srcX1, srcY1, dstX0, dstY0, dstX1, dstY1, mask, filter);
 }
 
@@ -3164,7 +3239,12 @@ static void QOPENGLF_APIENTRY qopenglfResolveRenderbufferStorageMultisample(GLen
                                       GLenum internalFormat,
                                       GLsizei width, GLsizei height)
 {
-    RESOLVE_FUNC_VOID_WITH_ALTERNATE(ResolveEXT, RenderbufferStorageMultisample, RenderbufferStorageMultisampleANGLE)
+#ifdef QT_OPENGL_ES_3
+    if (QOpenGLContext::currentContext()->format().majorVersion() >= 3)
+        ::glRenderbufferStorageMultisample(target, samples, internalFormat, width, height);
+    else
+#endif
+    RESOLVE_FUNC_VOID(ResolveEXT | ResolveANGLE | ResolveNV, RenderbufferStorageMultisample)
         (target, samples, internalFormat, width, height);
 }
 
@@ -3407,6 +3487,7 @@ QOpenGLExtensionsPrivate::QOpenGLExtensionsPrivate(QOpenGLContext *ctx)
     : QOpenGLFunctionsPrivate(ctx)
 {
     MapBuffer = qopenglfResolveMapBuffer;
+    MapBufferRange = qopenglfResolveMapBufferRange;
     UnmapBuffer = qopenglfResolveUnmapBuffer;
     BlitFramebuffer = qopenglfResolveBlitFramebuffer;
     RenderbufferStorageMultisample = qopenglfResolveRenderbufferStorageMultisample;
diff --git a/src/gui/opengl/qopenglfunctions.h b/src/gui/opengl/qopenglfunctions.h
index de1de39db2..479a280abe 100644
--- a/src/gui/opengl/qopenglfunctions.h
+++ b/src/gui/opengl/qopenglfunctions.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -563,8 +555,10 @@ struct QOpenGLFunctionsPrivate
     void (QOPENGLF_APIENTRYP VertexAttribPointer)(GLuint indx, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const void* ptr);
 
     // Special non-ES OpenGL variants, not to be called directly
+#ifndef QT_OPENGL_ES_2
     void (QOPENGLF_APIENTRYP ClearDepth)(GLdouble depth);
     void (QOPENGLF_APIENTRYP DepthRange)(GLdouble zNear, GLdouble zFar);
+#endif
 };
 
 // GLES2 + OpenGL1 common subset
diff --git a/src/gui/opengl/qopenglfunctions_1_0.cpp b/src/gui/opengl/qopenglfunctions_1_0.cpp
index f368bda76d..208893a50a 100644
--- a/src/gui/opengl/qopenglfunctions_1_0.cpp
+++ b/src/gui/opengl/qopenglfunctions_1_0.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_0.h b/src/gui/opengl/qopenglfunctions_1_0.h
index 189d06bfec..ea59efc44d 100644
--- a/src/gui/opengl/qopenglfunctions_1_0.h
+++ b/src/gui/opengl/qopenglfunctions_1_0.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_1.cpp b/src/gui/opengl/qopenglfunctions_1_1.cpp
index d101c5c406..48120ad440 100644
--- a/src/gui/opengl/qopenglfunctions_1_1.cpp
+++ b/src/gui/opengl/qopenglfunctions_1_1.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_1.h b/src/gui/opengl/qopenglfunctions_1_1.h
index fbe714c9ad..39fcc44929 100644
--- a/src/gui/opengl/qopenglfunctions_1_1.h
+++ b/src/gui/opengl/qopenglfunctions_1_1.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_2.cpp b/src/gui/opengl/qopenglfunctions_1_2.cpp
index 1c6ad1ddff..baf6ac39e5 100644
--- a/src/gui/opengl/qopenglfunctions_1_2.cpp
+++ b/src/gui/opengl/qopenglfunctions_1_2.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_2.h b/src/gui/opengl/qopenglfunctions_1_2.h
index e646fea703..8aa08df57e 100644
--- a/src/gui/opengl/qopenglfunctions_1_2.h
+++ b/src/gui/opengl/qopenglfunctions_1_2.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_3.cpp b/src/gui/opengl/qopenglfunctions_1_3.cpp
index aef3789f9a..82c1da5da9 100644
--- a/src/gui/opengl/qopenglfunctions_1_3.cpp
+++ b/src/gui/opengl/qopenglfunctions_1_3.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_3.h b/src/gui/opengl/qopenglfunctions_1_3.h
index 44728a2d18..79b0ff163b 100644
--- a/src/gui/opengl/qopenglfunctions_1_3.h
+++ b/src/gui/opengl/qopenglfunctions_1_3.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_4.cpp b/src/gui/opengl/qopenglfunctions_1_4.cpp
index 24b4c0ba7a..6438453552 100644
--- a/src/gui/opengl/qopenglfunctions_1_4.cpp
+++ b/src/gui/opengl/qopenglfunctions_1_4.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_4.h b/src/gui/opengl/qopenglfunctions_1_4.h
index 463927fdaf..c65abf0df0 100644
--- a/src/gui/opengl/qopenglfunctions_1_4.h
+++ b/src/gui/opengl/qopenglfunctions_1_4.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_5.cpp b/src/gui/opengl/qopenglfunctions_1_5.cpp
index b5a9486629..f502f03452 100644
--- a/src/gui/opengl/qopenglfunctions_1_5.cpp
+++ b/src/gui/opengl/qopenglfunctions_1_5.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_1_5.h b/src/gui/opengl/qopenglfunctions_1_5.h
index c50dcabb90..fd887e9e99 100644
--- a/src/gui/opengl/qopenglfunctions_1_5.h
+++ b/src/gui/opengl/qopenglfunctions_1_5.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_2_0.cpp b/src/gui/opengl/qopenglfunctions_2_0.cpp
index 0645750858..1d4f70706a 100644
--- a/src/gui/opengl/qopenglfunctions_2_0.cpp
+++ b/src/gui/opengl/qopenglfunctions_2_0.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_2_0.h b/src/gui/opengl/qopenglfunctions_2_0.h
index ee610793ad..4fb8c6c5b5 100644
--- a/src/gui/opengl/qopenglfunctions_2_0.h
+++ b/src/gui/opengl/qopenglfunctions_2_0.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_2_1.cpp b/src/gui/opengl/qopenglfunctions_2_1.cpp
index 133f3bf0cb..eb1202bcd3 100644
--- a/src/gui/opengl/qopenglfunctions_2_1.cpp
+++ b/src/gui/opengl/qopenglfunctions_2_1.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_2_1.h b/src/gui/opengl/qopenglfunctions_2_1.h
index 2dc77cd165..77205edef0 100644
--- a/src/gui/opengl/qopenglfunctions_2_1.h
+++ b/src/gui/opengl/qopenglfunctions_2_1.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_0.cpp b/src/gui/opengl/qopenglfunctions_3_0.cpp
index ae56b50b31..f96e8d31e6 100644
--- a/src/gui/opengl/qopenglfunctions_3_0.cpp
+++ b/src/gui/opengl/qopenglfunctions_3_0.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_0.h b/src/gui/opengl/qopenglfunctions_3_0.h
index d6448a08d6..b64e828200 100644
--- a/src/gui/opengl/qopenglfunctions_3_0.h
+++ b/src/gui/opengl/qopenglfunctions_3_0.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_1.cpp b/src/gui/opengl/qopenglfunctions_3_1.cpp
index 5014fdb62c..6690b0c6ac 100644
--- a/src/gui/opengl/qopenglfunctions_3_1.cpp
+++ b/src/gui/opengl/qopenglfunctions_3_1.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_1.h b/src/gui/opengl/qopenglfunctions_3_1.h
index b483ac21ad..57736a16de 100644
--- a/src/gui/opengl/qopenglfunctions_3_1.h
+++ b/src/gui/opengl/qopenglfunctions_3_1.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_2_compatibility.cpp b/src/gui/opengl/qopenglfunctions_3_2_compatibility.cpp
index a6de8fd0fe..49ae7fa097 100644
--- a/src/gui/opengl/qopenglfunctions_3_2_compatibility.cpp
+++ b/src/gui/opengl/qopenglfunctions_3_2_compatibility.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_2_compatibility.h b/src/gui/opengl/qopenglfunctions_3_2_compatibility.h
index 599f493104..7b26b0b55a 100644
--- a/src/gui/opengl/qopenglfunctions_3_2_compatibility.h
+++ b/src/gui/opengl/qopenglfunctions_3_2_compatibility.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_2_core.cpp b/src/gui/opengl/qopenglfunctions_3_2_core.cpp
index 2c41d3a5fe..38b6ba15cc 100644
--- a/src/gui/opengl/qopenglfunctions_3_2_core.cpp
+++ b/src/gui/opengl/qopenglfunctions_3_2_core.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_2_core.h b/src/gui/opengl/qopenglfunctions_3_2_core.h
index 8445384b60..016ed7570a 100644
--- a/src/gui/opengl/qopenglfunctions_3_2_core.h
+++ b/src/gui/opengl/qopenglfunctions_3_2_core.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_3_compatibility.cpp b/src/gui/opengl/qopenglfunctions_3_3_compatibility.cpp
index dc36eba1ad..bee69dd70b 100644
--- a/src/gui/opengl/qopenglfunctions_3_3_compatibility.cpp
+++ b/src/gui/opengl/qopenglfunctions_3_3_compatibility.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_3_compatibility.h b/src/gui/opengl/qopenglfunctions_3_3_compatibility.h
index 6230ebccec..8295123cde 100644
--- a/src/gui/opengl/qopenglfunctions_3_3_compatibility.h
+++ b/src/gui/opengl/qopenglfunctions_3_3_compatibility.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_3_core.cpp b/src/gui/opengl/qopenglfunctions_3_3_core.cpp
index 5a1e238d0e..f874564d4a 100644
--- a/src/gui/opengl/qopenglfunctions_3_3_core.cpp
+++ b/src/gui/opengl/qopenglfunctions_3_3_core.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_3_3_core.h b/src/gui/opengl/qopenglfunctions_3_3_core.h
index e24c678b9b..04de3afb14 100644
--- a/src/gui/opengl/qopenglfunctions_3_3_core.h
+++ b/src/gui/opengl/qopenglfunctions_3_3_core.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_0_compatibility.cpp b/src/gui/opengl/qopenglfunctions_4_0_compatibility.cpp
index 7affa43da1..328c2db1af 100644
--- a/src/gui/opengl/qopenglfunctions_4_0_compatibility.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_0_compatibility.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_0_compatibility.h b/src/gui/opengl/qopenglfunctions_4_0_compatibility.h
index 72e270a1c8..f11cb1ad33 100644
--- a/src/gui/opengl/qopenglfunctions_4_0_compatibility.h
+++ b/src/gui/opengl/qopenglfunctions_4_0_compatibility.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_0_core.cpp b/src/gui/opengl/qopenglfunctions_4_0_core.cpp
index 5e8bd8d6a5..801d828f86 100644
--- a/src/gui/opengl/qopenglfunctions_4_0_core.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_0_core.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_0_core.h b/src/gui/opengl/qopenglfunctions_4_0_core.h
index 7d4e468399..9aa898c796 100644
--- a/src/gui/opengl/qopenglfunctions_4_0_core.h
+++ b/src/gui/opengl/qopenglfunctions_4_0_core.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_1_compatibility.cpp b/src/gui/opengl/qopenglfunctions_4_1_compatibility.cpp
index 44e937557a..8622d8f740 100644
--- a/src/gui/opengl/qopenglfunctions_4_1_compatibility.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_1_compatibility.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_1_compatibility.h b/src/gui/opengl/qopenglfunctions_4_1_compatibility.h
index e343d2cba9..77830c622c 100644
--- a/src/gui/opengl/qopenglfunctions_4_1_compatibility.h
+++ b/src/gui/opengl/qopenglfunctions_4_1_compatibility.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_1_core.cpp b/src/gui/opengl/qopenglfunctions_4_1_core.cpp
index 04fcc78d5d..a45acd2f1c 100644
--- a/src/gui/opengl/qopenglfunctions_4_1_core.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_1_core.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_1_core.h b/src/gui/opengl/qopenglfunctions_4_1_core.h
index 851d80bf36..5a7861319b 100644
--- a/src/gui/opengl/qopenglfunctions_4_1_core.h
+++ b/src/gui/opengl/qopenglfunctions_4_1_core.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_2_compatibility.cpp b/src/gui/opengl/qopenglfunctions_4_2_compatibility.cpp
index 1329327f3e..a44b38725a 100644
--- a/src/gui/opengl/qopenglfunctions_4_2_compatibility.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_2_compatibility.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_2_compatibility.h b/src/gui/opengl/qopenglfunctions_4_2_compatibility.h
index 1819c79702..b3dec2c564 100644
--- a/src/gui/opengl/qopenglfunctions_4_2_compatibility.h
+++ b/src/gui/opengl/qopenglfunctions_4_2_compatibility.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_2_core.cpp b/src/gui/opengl/qopenglfunctions_4_2_core.cpp
index 652d5810c5..1373cc3df3 100644
--- a/src/gui/opengl/qopenglfunctions_4_2_core.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_2_core.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_2_core.h b/src/gui/opengl/qopenglfunctions_4_2_core.h
index dbdaa2996f..4e10fa2b54 100644
--- a/src/gui/opengl/qopenglfunctions_4_2_core.h
+++ b/src/gui/opengl/qopenglfunctions_4_2_core.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_3_compatibility.cpp b/src/gui/opengl/qopenglfunctions_4_3_compatibility.cpp
index 19fffc8f2e..e4704f9dbc 100644
--- a/src/gui/opengl/qopenglfunctions_4_3_compatibility.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_3_compatibility.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_3_compatibility.h b/src/gui/opengl/qopenglfunctions_4_3_compatibility.h
index 60be506e6a..77a19c3947 100644
--- a/src/gui/opengl/qopenglfunctions_4_3_compatibility.h
+++ b/src/gui/opengl/qopenglfunctions_4_3_compatibility.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_3_core.cpp b/src/gui/opengl/qopenglfunctions_4_3_core.cpp
index b9659eeb88..13b698ca9a 100644
--- a/src/gui/opengl/qopenglfunctions_4_3_core.cpp
+++ b/src/gui/opengl/qopenglfunctions_4_3_core.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_4_3_core.h b/src/gui/opengl/qopenglfunctions_4_3_core.h
index f7823cd6aa..bef6b56ef3 100644
--- a/src/gui/opengl/qopenglfunctions_4_3_core.h
+++ b/src/gui/opengl/qopenglfunctions_4_3_core.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglfunctions_es2.cpp b/src/gui/opengl/qopenglfunctions_es2.cpp
index 5e0efbd02e..cece95af2d 100644
--- a/src/gui/opengl/qopenglfunctions_es2.cpp
+++ b/src/gui/opengl/qopenglfunctions_es2.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglfunctions_es2.h b/src/gui/opengl/qopenglfunctions_es2.h
index 21ed6bec93..1237021ab1 100644
--- a/src/gui/opengl/qopenglfunctions_es2.h
+++ b/src/gui/opengl/qopenglfunctions_es2.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglgradientcache.cpp b/src/gui/opengl/qopenglgradientcache.cpp
index 91b4d08474..49e4e62da1 100644
--- a/src/gui/opengl/qopenglgradientcache.cpp
+++ b/src/gui/opengl/qopenglgradientcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -102,13 +94,13 @@ void QOpenGL2GradientCache::cleanCache()
 
 GLuint QOpenGL2GradientCache::getBuffer(const QGradient &gradient, qreal opacity)
 {
-    QMutexLocker lock(&m_mutex);
     quint64 hash_val = 0;
 
     QGradientStops stops = gradient.stops();
     for (int i = 0; i < stops.size() && i <= 2; i++)
         hash_val += stops[i].second.rgba();
 
+    const QMutexLocker lock(&m_mutex);
     QOpenGLGradientColorTableHash::const_iterator it = cache.constFind(hash_val);
 
     if (it == cache.constEnd())
diff --git a/src/gui/opengl/qopenglgradientcache_p.h b/src/gui/opengl/qopenglgradientcache_p.h
index 3530741cac..fc6df0b97f 100644
--- a/src/gui/opengl/qopenglgradientcache_p.h
+++ b/src/gui/opengl/qopenglgradientcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglpaintdevice.cpp b/src/gui/opengl/qopenglpaintdevice.cpp
index 6750458f83..59bca6efdf 100644
--- a/src/gui/opengl/qopenglpaintdevice.cpp
+++ b/src/gui/opengl/qopenglpaintdevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,9 +55,9 @@ QT_BEGIN_NAMESPACE
 
     \ingroup painting-3D
 
-    The QOpenGLPaintDevice uses the current QOpenGL context to render
-    QPainter draw commands. It requires OpenGL (ES) 2.0 support or
-    higher.
+    The QOpenGLPaintDevice uses the \b current QOpenGL context to render
+    QPainter draw commands. The context is captured upon construction. It
+    requires support for OpenGL (ES) 2.0 or higher.
 
     \section1 Performance
 
@@ -359,9 +351,9 @@ bool QOpenGLPaintDevice::paintFlipped() const
 }
 
 /*!
-    This virtual method is provided as a callback to allow re-binding a
-    target frame buffer object when different QOpenGLPaintDevice instances
-    are issuing draw calls alternately on the same OpenGL context.
+    This virtual method is provided as a callback to allow re-binding a target
+    frame buffer object or context when different QOpenGLPaintDevice instances
+    are issuing draw calls alternately.
 
     QPainter::beginNativePainting will also trigger this method.
 */
diff --git a/src/gui/opengl/qopenglpaintdevice.h b/src/gui/opengl/qopenglpaintdevice.h
index c05571c928..e1be9b525d 100644
--- a/src/gui/opengl/qopenglpaintdevice.h
+++ b/src/gui/opengl/qopenglpaintdevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglpaintengine.cpp b/src/gui/opengl/qopenglpaintengine.cpp
index 81a0d82c99..21bc4a95e8 100644
--- a/src/gui/opengl/qopenglpaintengine.cpp
+++ b/src/gui/opengl/qopenglpaintengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -154,8 +146,8 @@ void QOpenGL2PaintEngineExPrivate::setBrush(const QBrush& brush)
     Q_ASSERT(newStyle != Qt::NoBrush);
 
     currentBrush = brush;
-    if (!currentBrushPixmap.isNull())
-        currentBrushPixmap = QPixmap();
+    if (!currentBrushImage.isNull())
+        currentBrushImage = QImage();
     brushUniformsDirty = true; // All brushes have at least one uniform
 
     if (newStyle > Qt::SolidPattern)
@@ -214,11 +206,11 @@ void QOpenGL2PaintEngineExPrivate::updateBrushTexture()
             updateTextureFilter(GL_TEXTURE_2D, GL_CLAMP_TO_EDGE, q->state()->renderHints & QPainter::SmoothPixmapTransform);
     }
     else if (style == Qt::TexturePattern) {
-        currentBrushPixmap = currentBrush.texture();
+        currentBrushImage = currentBrush.textureImage();
 
         int max_texture_size = ctx->d_func()->maxTextureSize();
-        if (currentBrushPixmap.width() > max_texture_size || currentBrushPixmap.height() > max_texture_size)
-            currentBrushPixmap = currentBrushPixmap.scaled(max_texture_size, max_texture_size, Qt::KeepAspectRatio);
+        if (currentBrushImage.width() > max_texture_size || currentBrushImage.height() > max_texture_size)
+            currentBrushImage = currentBrushImage.scaled(max_texture_size, max_texture_size, Qt::KeepAspectRatio);
 
         GLuint wrapMode = GL_REPEAT;
         if (QOpenGLContext::currentContext()->isOpenGLES()) {
@@ -229,7 +221,7 @@ void QOpenGL2PaintEngineExPrivate::updateBrushTexture()
         }
 
         funcs.glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
-        QOpenGLTextureCache::cacheForContext(ctx)->bindTexture(ctx, currentBrushPixmap);
+        QOpenGLTextureCache::cacheForContext(ctx)->bindTexture(ctx, currentBrushImage);
         updateTextureFilter(GL_TEXTURE_2D, wrapMode, q->state()->renderHints & QPainter::SmoothPixmapTransform);
         textureInvertedY = false;
     }
@@ -501,7 +493,6 @@ void QOpenGL2PaintEngineExPrivate::drawTexture(const QOpenGLRect& dest, const QO
 {
     // Setup for texture drawing
     currentBrush = noBrush;
-    shaderManager->setSrcPixelType(pattern ? QOpenGLEngineShaderManager::PatternSrc : QOpenGLEngineShaderManager::ImageSrc);
 
     if (snapToPixelGrid) {
         snapToPixelGrid = false;
@@ -1367,6 +1358,11 @@ void QOpenGL2PaintEngineEx::drawPixmap(const QRectF& dest, const QPixmap & pixma
     Q_D(QOpenGL2PaintEngineEx);
     QOpenGLContext *ctx = d->ctx;
 
+    // Draw pixmaps that are really images as images since drawImage has
+    // better handling of non-default image formats.
+    if (pixmap.paintEngine()->type() == QPaintEngine::Raster && !pixmap.isQBitmap())
+        return drawImage(dest, pixmap.toImage(), src);
+
     int max_texture_size = ctx->d_func()->maxTextureSize();
     if (pixmap.width() > max_texture_size || pixmap.height() > max_texture_size) {
         QPixmap scaled = pixmap.scaled(max_texture_size, max_texture_size, Qt::KeepAspectRatio);
@@ -1391,6 +1387,8 @@ void QOpenGL2PaintEngineEx::drawPixmap(const QRectF& dest, const QPixmap & pixma
 
     d->updateTextureFilter(GL_TEXTURE_2D, GL_CLAMP_TO_EDGE,
                            state()->renderHints & QPainter::SmoothPixmapTransform, id);
+
+    d->shaderManager->setSrcPixelType(isBitmap ? QOpenGLEngineShaderManager::PatternSrc : QOpenGLEngineShaderManager::ImageSrc);
     d->drawTexture(dest, srcRect, pixmap.size(), isOpaque, isBitmap);
 }
 
@@ -1414,12 +1412,25 @@ void QOpenGL2PaintEngineEx::drawImage(const QRectF& dest, const QImage& image, c
     ensureActive();
     d->transferMode(ImageDrawingMode);
 
-    d->funcs.glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
+    QOpenGLTextureCache::BindOptions bindOption = QOpenGLTextureCache::PremultipliedAlphaBindOption;
+    // Use specialized bind for formats we have specialized shaders for.
+    switch (image.format()) {
+    case QImage::Format_RGBA8888:
+    case QImage::Format_ARGB32:
+        d->shaderManager->setSrcPixelType(QOpenGLEngineShaderManager::NonPremultipliedImageSrc);
+        bindOption = 0;
+        break;
+    default:
+        d->shaderManager->setSrcPixelType(QOpenGLEngineShaderManager::ImageSrc);
+        break;
+    }
 
-    GLuint id = QOpenGLTextureCache::cacheForContext(ctx)->bindTexture(ctx, image);
+    d->funcs.glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
+    GLuint id = QOpenGLTextureCache::cacheForContext(ctx)->bindTexture(ctx, image, bindOption);
 
     d->updateTextureFilter(GL_TEXTURE_2D, GL_CLAMP_TO_EDGE,
                            state()->renderHints & QPainter::SmoothPixmapTransform, id);
+
     d->drawTexture(dest, src, image.size(), !image.hasAlphaChannel());
 }
 
@@ -1466,6 +1477,7 @@ bool QOpenGL2PaintEngineEx::drawTexture(const QRectF &dest, GLuint textureId, co
 
     d->updateTextureFilter(GL_TEXTURE_2D, GL_CLAMP_TO_EDGE,
                            state()->renderHints & QPainter::SmoothPixmapTransform, textureId);
+    d->shaderManager->setSrcPixelType(QOpenGLEngineShaderManager::ImageSrc);
     d->drawTexture(dest, srcRect, size, false);
     return true;
 }
@@ -1823,7 +1835,7 @@ void QOpenGL2PaintEngineExPrivate::drawCachedGlyphs(QFontEngine::GlyphFormat gly
         if (prepareForCachedGlyphDraw(*cache))
             shaderManager->currentProgram()->setUniformValue(location(QOpenGLEngineShaderManager::ImageTexture), QT_IMAGE_TEXTURE_UNIT);
     } else {
-        // Greyscale/mono glyphs
+        // Grayscale/mono glyphs
 
         shaderManager->setMaskType(QOpenGLEngineShaderManager::PixelMask);
         prepareForCachedGlyphDraw(*cache);
@@ -1972,6 +1984,8 @@ bool QOpenGL2PaintEngineEx::begin(QPaintDevice *pdev)
     if (!d->device)
         return false;
 
+    d->device->ensureActiveTarget();
+
     if (d->device->context() != QOpenGLContext::currentContext()) {
         qWarning("QPainter::begin(): QOpenGLPaintDevice's context needs to be current");
         return false;
diff --git a/src/gui/opengl/qopenglpaintengine_p.h b/src/gui/opengl/qopenglpaintengine_p.h
index 4f0e2e52a4..5ef0366284 100644
--- a/src/gui/opengl/qopenglpaintengine_p.h
+++ b/src/gui/opengl/qopenglpaintengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -288,7 +280,7 @@ public:
     QBrush currentBrush; // May not be the state's brush!
     const QBrush noBrush;
 
-    QPixmap currentBrushPixmap;
+    QImage currentBrushImage;
 
     QOpenGL2PEXVertexArray vertexCoordinateArray;
     QOpenGL2PEXVertexArray textureCoordinateArray;
diff --git a/src/gui/opengl/qopenglpixeltransferoptions.cpp b/src/gui/opengl/qopenglpixeltransferoptions.cpp
index d2d1b91cf5..4f72b43f37 100644
--- a/src/gui/opengl/qopenglpixeltransferoptions.cpp
+++ b/src/gui/opengl/qopenglpixeltransferoptions.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglpixeltransferoptions.h b/src/gui/opengl/qopenglpixeltransferoptions.h
index c150e8aff4..50ca74d8f0 100644
--- a/src/gui/opengl/qopenglpixeltransferoptions.h
+++ b/src/gui/opengl/qopenglpixeltransferoptions.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglqueryhelper_p.h b/src/gui/opengl/qopenglqueryhelper_p.h
index bfafb30518..01b339e4f3 100644
--- a/src/gui/opengl/qopenglqueryhelper_p.h
+++ b/src/gui/opengl/qopenglqueryhelper_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglshadercache_meego_p.h b/src/gui/opengl/qopenglshadercache_meego_p.h
index d1c14150d1..d2467dde90 100644
--- a/src/gui/opengl/qopenglshadercache_meego_p.h
+++ b/src/gui/opengl/qopenglshadercache_meego_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglshadercache_p.h b/src/gui/opengl/qopenglshadercache_p.h
index 17305539df..10160621af 100644
--- a/src/gui/opengl/qopenglshadercache_p.h
+++ b/src/gui/opengl/qopenglshadercache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglshaderprogram.cpp b/src/gui/opengl/qopenglshaderprogram.cpp
index 6e85e5eb4b..5ea7a10e0d 100644
--- a/src/gui/opengl/qopenglshaderprogram.cpp
+++ b/src/gui/opengl/qopenglshaderprogram.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -79,7 +71,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet code/src_gui_qopenglshaderprogram.cpp 0
 
-    \section1 Writing portable shaders
+    \section1 Writing Portable Shaders
 
     Shader programs can be difficult to reuse across OpenGL implementations
     because of varying levels of support for standard vertex attributes and
@@ -103,7 +95,7 @@ QT_BEGIN_NAMESPACE
     to just features that are present in GLSL/ES, and avoid
     standard variable names that only work on the desktop.
 
-    \section1 Simple shader example
+    \section1 Simple Shader Example
 
     \snippet code/src_gui_qopenglshaderprogram.cpp 1
 
@@ -112,7 +104,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet code/src_gui_qopenglshaderprogram.cpp 2
 
-    \section1 Binary shaders and programs
+    \section1 Binary Shaders and Programs
 
     Binary shaders may be specified using \c{glShaderBinary()} on
     the return value from QOpenGLShader::shaderId().  The QOpenGLShader instance
@@ -278,16 +270,27 @@ bool QOpenGLShaderPrivate::compile(QOpenGLShader *q)
             "Fragment",
             "Vertex",
             "Geometry",
+            "Tessellation Control",
+            "Tessellation Evaluation",
+            "Compute",
             ""
         };
 
-        const char *type = types[3];
-        if (shaderType == QOpenGLShader::Fragment)
-            type = types[0];
-        else if (shaderType == QOpenGLShader::Vertex)
-            type = types[1];
-        else if (shaderType == QOpenGLShader::Geometry)
-            type = types[2];
+        const char *type = types[6];
+        switch (shaderType) {
+        case QOpenGLShader::Fragment:
+            type = types[0]; break;
+        case QOpenGLShader::Vertex:
+            type = types[1]; break;
+        case QOpenGLShader::Geometry:
+            type = types[2]; break;
+        case QOpenGLShader::TessellationControl:
+            type = types[3]; break;
+        case QOpenGLShader::TessellationEvaluation:
+            type = types[4]; break;
+        case QOpenGLShader::Compute:
+            type = types[5]; break;
+        }
 
         // Get info and source code lengths
         GLint infoLogLength = 0;
diff --git a/src/gui/opengl/qopenglshaderprogram.h b/src/gui/opengl/qopenglshaderprogram.h
index 91754842e6..378304cedd 100644
--- a/src/gui/opengl/qopenglshaderprogram.h
+++ b/src/gui/opengl/qopenglshaderprogram.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengltexture.cpp b/src/gui/opengl/qopengltexture.cpp
index e0e1c72a6c..f6083b8cf9 100644
--- a/src/gui/opengl/qopengltexture.cpp
+++ b/src/gui/opengl/qopengltexture.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,7 +59,7 @@ QOpenGLTexturePrivate::QOpenGLTexturePrivate(QOpenGLTexture::Target textureTarge
       mipLevels(-1),
       layers(1),
       faces(1),
-      samples(1),
+      samples(0),
       fixedSamplePositions(true),
       baseLevel(0),
       maxLevel(1000),
@@ -200,7 +192,7 @@ void QOpenGLTexturePrivate::destroy()
     mipLevels = -1;
     layers = 1;
     faces = 1;
-    samples = 1;
+    samples = 0;
     fixedSamplePositions = true,
     baseLevel = 0;
     maxLevel = 1000;
@@ -314,8 +306,239 @@ void QOpenGLTexturePrivate::allocateStorage()
         allocateMutableStorage();
 }
 
+static QOpenGLTexture::PixelFormat pixelFormatCompatibleWithInternalFormat(QOpenGLTexture::TextureFormat internalFormat)
+{
+    switch (internalFormat) {
+    case QOpenGLTexture::NoFormat:
+        return QOpenGLTexture::NoSourceFormat;
+
+    case QOpenGLTexture::R8_UNorm:
+    case QOpenGLTexture::RG8_UNorm:
+    case QOpenGLTexture::RGB8_UNorm:
+    case QOpenGLTexture::RGBA8_UNorm:
+    case QOpenGLTexture::R16_UNorm:
+    case QOpenGLTexture::RG16_UNorm:
+    case QOpenGLTexture::RGB16_UNorm:
+    case QOpenGLTexture::RGBA16_UNorm:
+    case QOpenGLTexture::R8_SNorm:
+    case QOpenGLTexture::RG8_SNorm:
+    case QOpenGLTexture::RGB8_SNorm:
+    case QOpenGLTexture::RGBA8_SNorm:
+    case QOpenGLTexture::R16_SNorm:
+    case QOpenGLTexture::RG16_SNorm:
+    case QOpenGLTexture::RGB16_SNorm:
+    case QOpenGLTexture::RGBA16_SNorm:
+    case QOpenGLTexture::R8U:
+    case QOpenGLTexture::RG8U:
+    case QOpenGLTexture::RGB8U:
+    case QOpenGLTexture::RGBA8U:
+    case QOpenGLTexture::R16U:
+    case QOpenGLTexture::RG16U:
+    case QOpenGLTexture::RGB16U:
+    case QOpenGLTexture::RGBA16U:
+    case QOpenGLTexture::R32U:
+    case QOpenGLTexture::RG32U:
+    case QOpenGLTexture::RGB32U:
+    case QOpenGLTexture::RGBA32U:
+    case QOpenGLTexture::R8I:
+    case QOpenGLTexture::RG8I:
+    case QOpenGLTexture::RGB8I:
+    case QOpenGLTexture::RGBA8I:
+    case QOpenGLTexture::R16I:
+    case QOpenGLTexture::RG16I:
+    case QOpenGLTexture::RGB16I:
+    case QOpenGLTexture::RGBA16I:
+    case QOpenGLTexture::R32I:
+    case QOpenGLTexture::RG32I:
+    case QOpenGLTexture::RGB32I:
+    case QOpenGLTexture::RGBA32I:
+    case QOpenGLTexture::R16F:
+    case QOpenGLTexture::RG16F:
+    case QOpenGLTexture::RGB16F:
+    case QOpenGLTexture::RGBA16F:
+    case QOpenGLTexture::R32F:
+    case QOpenGLTexture::RG32F:
+    case QOpenGLTexture::RGB32F:
+    case QOpenGLTexture::RGBA32F:
+    case QOpenGLTexture::RGB9E5:
+    case QOpenGLTexture::RG11B10F:
+    case QOpenGLTexture::RG3B2:
+    case QOpenGLTexture::R5G6B5:
+    case QOpenGLTexture::RGB5A1:
+    case QOpenGLTexture::RGBA4:
+    case QOpenGLTexture::RGB10A2:
+        return QOpenGLTexture::RGBA;
+
+    case QOpenGLTexture::D16:
+    case QOpenGLTexture::D24:
+    case QOpenGLTexture::D32:
+    case QOpenGLTexture::D32F:
+        return QOpenGLTexture::Depth;
+
+    case QOpenGLTexture::D24S8:
+    case QOpenGLTexture::D32FS8X24:
+        return QOpenGLTexture::DepthStencil;
+
+    case QOpenGLTexture::S8:
+        return QOpenGLTexture::Stencil;
+
+    case QOpenGLTexture::RGB_DXT1:
+    case QOpenGLTexture::RGBA_DXT1:
+    case QOpenGLTexture::RGBA_DXT3:
+    case QOpenGLTexture::RGBA_DXT5:
+    case QOpenGLTexture::R_ATI1N_UNorm:
+    case QOpenGLTexture::R_ATI1N_SNorm:
+    case QOpenGLTexture::RG_ATI2N_UNorm:
+    case QOpenGLTexture::RG_ATI2N_SNorm:
+    case QOpenGLTexture::RGB_BP_UNSIGNED_FLOAT:
+    case QOpenGLTexture::RGB_BP_SIGNED_FLOAT:
+    case QOpenGLTexture::RGB_BP_UNorm:
+    case QOpenGLTexture::SRGB8:
+    case QOpenGLTexture::SRGB8_Alpha8:
+    case QOpenGLTexture::SRGB_DXT1:
+    case QOpenGLTexture::SRGB_Alpha_DXT1:
+    case QOpenGLTexture::SRGB_Alpha_DXT3:
+    case QOpenGLTexture::SRGB_Alpha_DXT5:
+    case QOpenGLTexture::SRGB_BP_UNorm:
+        return QOpenGLTexture::RGBA;
+
+    case QOpenGLTexture::DepthFormat:
+        return QOpenGLTexture::Depth;
+
+    case QOpenGLTexture::AlphaFormat:
+        return QOpenGLTexture::Alpha;
+
+    case QOpenGLTexture::RGBFormat:
+    case QOpenGLTexture::RGBAFormat:
+        return QOpenGLTexture::RGBA;
+
+    case QOpenGLTexture::LuminanceFormat:
+        return QOpenGLTexture::Luminance;
+
+    case QOpenGLTexture::LuminanceAlphaFormat:
+        return QOpenGLTexture::LuminanceAlpha;
+    }
+
+    Q_UNREACHABLE();
+    return QOpenGLTexture::NoSourceFormat;
+}
+
+static QOpenGLTexture::PixelType pixelTypeCompatibleWithInternalFormat(QOpenGLTexture::TextureFormat internalFormat)
+{
+    switch (internalFormat) {
+    case QOpenGLTexture::NoFormat:
+        return QOpenGLTexture::NoPixelType;
+
+    case QOpenGLTexture::R8_UNorm:
+    case QOpenGLTexture::RG8_UNorm:
+    case QOpenGLTexture::RGB8_UNorm:
+    case QOpenGLTexture::RGBA8_UNorm:
+    case QOpenGLTexture::R16_UNorm:
+    case QOpenGLTexture::RG16_UNorm:
+    case QOpenGLTexture::RGB16_UNorm:
+    case QOpenGLTexture::RGBA16_UNorm:
+    case QOpenGLTexture::R8_SNorm:
+    case QOpenGLTexture::RG8_SNorm:
+    case QOpenGLTexture::RGB8_SNorm:
+    case QOpenGLTexture::RGBA8_SNorm:
+    case QOpenGLTexture::R16_SNorm:
+    case QOpenGLTexture::RG16_SNorm:
+    case QOpenGLTexture::RGB16_SNorm:
+    case QOpenGLTexture::RGBA16_SNorm:
+    case QOpenGLTexture::R8U:
+    case QOpenGLTexture::RG8U:
+    case QOpenGLTexture::RGB8U:
+    case QOpenGLTexture::RGBA8U:
+    case QOpenGLTexture::R16U:
+    case QOpenGLTexture::RG16U:
+    case QOpenGLTexture::RGB16U:
+    case QOpenGLTexture::RGBA16U:
+    case QOpenGLTexture::R32U:
+    case QOpenGLTexture::RG32U:
+    case QOpenGLTexture::RGB32U:
+    case QOpenGLTexture::RGBA32U:
+    case QOpenGLTexture::R8I:
+    case QOpenGLTexture::RG8I:
+    case QOpenGLTexture::RGB8I:
+    case QOpenGLTexture::RGBA8I:
+    case QOpenGLTexture::R16I:
+    case QOpenGLTexture::RG16I:
+    case QOpenGLTexture::RGB16I:
+    case QOpenGLTexture::RGBA16I:
+    case QOpenGLTexture::R32I:
+    case QOpenGLTexture::RG32I:
+    case QOpenGLTexture::RGB32I:
+    case QOpenGLTexture::RGBA32I:
+    case QOpenGLTexture::R16F:
+    case QOpenGLTexture::RG16F:
+    case QOpenGLTexture::RGB16F:
+    case QOpenGLTexture::RGBA16F:
+    case QOpenGLTexture::R32F:
+    case QOpenGLTexture::RG32F:
+    case QOpenGLTexture::RGB32F:
+    case QOpenGLTexture::RGBA32F:
+    case QOpenGLTexture::RGB9E5:
+    case QOpenGLTexture::RG11B10F:
+    case QOpenGLTexture::RG3B2:
+    case QOpenGLTexture::R5G6B5:
+    case QOpenGLTexture::RGB5A1:
+    case QOpenGLTexture::RGBA4:
+    case QOpenGLTexture::RGB10A2:
+        return QOpenGLTexture::UInt8;
+
+    case QOpenGLTexture::D16:
+    case QOpenGLTexture::D24:
+    case QOpenGLTexture::D32:
+    case QOpenGLTexture::D32F:
+        return QOpenGLTexture::UInt8;
+
+    case QOpenGLTexture::D24S8:
+        return QOpenGLTexture::UInt32_D24S8;
+
+    case QOpenGLTexture::D32FS8X24:
+        return QOpenGLTexture::Float32_D32_UInt32_S8_X24;
+
+    case QOpenGLTexture::S8:
+        return QOpenGLTexture::UInt8;
+
+    case QOpenGLTexture::RGB_DXT1:
+    case QOpenGLTexture::RGBA_DXT1:
+    case QOpenGLTexture::RGBA_DXT3:
+    case QOpenGLTexture::RGBA_DXT5:
+    case QOpenGLTexture::R_ATI1N_UNorm:
+    case QOpenGLTexture::R_ATI1N_SNorm:
+    case QOpenGLTexture::RG_ATI2N_UNorm:
+    case QOpenGLTexture::RG_ATI2N_SNorm:
+    case QOpenGLTexture::RGB_BP_UNSIGNED_FLOAT:
+    case QOpenGLTexture::RGB_BP_SIGNED_FLOAT:
+    case QOpenGLTexture::RGB_BP_UNorm:
+    case QOpenGLTexture::SRGB8:
+    case QOpenGLTexture::SRGB8_Alpha8:
+    case QOpenGLTexture::SRGB_DXT1:
+    case QOpenGLTexture::SRGB_Alpha_DXT1:
+    case QOpenGLTexture::SRGB_Alpha_DXT3:
+    case QOpenGLTexture::SRGB_Alpha_DXT5:
+    case QOpenGLTexture::SRGB_BP_UNorm:
+        return QOpenGLTexture::UInt8;
+
+    case QOpenGLTexture::DepthFormat:
+    case QOpenGLTexture::AlphaFormat:
+    case QOpenGLTexture::RGBFormat:
+    case QOpenGLTexture::RGBAFormat:
+    case QOpenGLTexture::LuminanceFormat:
+    case QOpenGLTexture::LuminanceAlphaFormat:
+        return QOpenGLTexture::UInt8;
+    }
+
+    Q_UNREACHABLE();
+    return QOpenGLTexture::NoPixelType;
+}
+
 void QOpenGLTexturePrivate::allocateMutableStorage()
 {
+    const QOpenGLTexture::PixelFormat pixelFormat = pixelFormatCompatibleWithInternalFormat(format);
+    const QOpenGLTexture::PixelType pixelType = pixelTypeCompatibleWithInternalFormat(format);
+
     switch (target) {
     case QOpenGLTexture::TargetBuffer:
         // Buffer textures get their storage from an external OpenGL buffer
@@ -328,7 +551,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                 texFuncs->glTextureImage1D(textureId, target, bindingTarget, level, format,
                                            mipLevelSize(level, dimensions[0]),
                                            0,
-                                           QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                           pixelFormat, pixelType, 0);
         } else {
             qWarning("1D textures are not supported");
             return;
@@ -343,7 +566,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                                            mipLevelSize(level, dimensions[0]),
                                            layers,
                                            0,
-                                           QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                           pixelFormat, pixelType, 0);
         } else {
             qWarning("1D array textures are not supported");
             return;
@@ -357,7 +580,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                                        mipLevelSize(level, dimensions[0]),
                                        mipLevelSize(level, dimensions[1]),
                                        0,
-                                       QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                       pixelFormat, pixelType, 0);
         break;
 
     case QOpenGLTexture::TargetCubeMap: {
@@ -377,7 +600,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                                            mipLevelSize(level, dimensions[0]),
                                            mipLevelSize(level, dimensions[1]),
                                            0,
-                                           QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                           pixelFormat, pixelType, 0);
             }
         }
         break;
@@ -391,7 +614,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                                            mipLevelSize(level, dimensions[1]),
                                            layers,
                                            0,
-                                           QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                           pixelFormat, pixelType, 0);
         } else {
             qWarning("Array textures are not supported");
             return;
@@ -407,7 +630,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                                            mipLevelSize(level, dimensions[1]),
                                            6 * layers,
                                            0,
-                                           QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                           pixelFormat, pixelType, 0);
         } else {
             qWarning("Cubemap Array textures are not supported");
             return;
@@ -422,7 +645,7 @@ void QOpenGLTexturePrivate::allocateMutableStorage()
                                            mipLevelSize(level, dimensions[1]),
                                            mipLevelSize(level, dimensions[2]),
                                            0,
-                                           QOpenGLTexture::RGBA, QOpenGLTexture::UInt8, 0);
+                                           pixelFormat, pixelType, 0);
         } else {
             qWarning("3D textures are not supported");
             return;
@@ -1289,6 +1512,7 @@ QOpenGLTexture *QOpenGLTexturePrivate::createTextureView(QOpenGLTexture::Target
     \value D32 Equivalent to GL_DEPTH_COMPONENT32
     \value D32F Equivalent to GL_DEPTH_COMPONENT32F
     \value D32FS8X24 Equivalent to GL_DEPTH32F_STENCIL8
+    \value S8 Equivalent to GL_STENCIL_INDEX8. Introduced in Qt 5.4
 
     \value RGB_DXT1 Equivalent to GL_COMPRESSED_RGB_S3TC_DXT1_EXT
     \value RGBA_DXT1 Equivalent to GL_COMPRESSED_RGBA_S3TC_DXT1_EXT
@@ -1348,6 +1572,7 @@ QOpenGLTexture *QOpenGLTexturePrivate::createTextureView(QOpenGLTexture::Target
     \value BGR_Integer Equivalent to GL_BGR_INTEGER
     \value RGBA_Integer Equivalent to GL_RGBA_INTEGER
     \value BGRA_Integer Equivalent to GL_BGRA_INTEGER
+    \value Stencil Equivalent to GL_STENCIL_INDEX. Introduced in Qt 5.4
     \value Depth Equivalent to GL_DEPTH_COMPONENT
     \value DepthStencil Equivalent to GL_DEPTH_STENCIL
     \value Alpha Equivalent to GL_ALPHA (OpenGL ES 2 only)
@@ -1380,8 +1605,12 @@ QOpenGLTexture *QOpenGLTexturePrivate::createTextureView(QOpenGLTexture::Target
     \value UInt16_R5G6B5_Rev Equivalent to GL_UNSIGNED_SHORT_5_6_5_REV
     \value UInt16_RGBA4 Equivalent to GL_UNSIGNED_SHORT_4_4_4_4
     \value UInt16_RGBA4_Rev Equivalent to GL_UNSIGNED_SHORT_4_4_4_4_REV
+    \value UInt32_RGBA8 Equivalent to GL_UNSIGNED_INT_8_8_8_8
+    \value UInt32_RGBA8_Rev Equivalent to GL_UNSIGNED_INT_8_8_8_8_REV
     \value UInt32_RGB10A2 Equivalent to GL_UNSIGNED_INT_10_10_10_2
     \value UInt32_RGB10A2_Rev Equivalent to GL_UNSIGNED_INT_2_10_10_10_REV
+    \value UInt32_D24S8 Equivalent to GL_UNSIGNED_INT_24_8. Introduced in Qt 5.4
+    \value Float32_D32_UInt32_S8_X24 Equivalent to GL_FLOAT_32_UNSIGNED_INT_24_8_REV. Introduced in Qt 5.4
 */
 
 /*!
@@ -1483,6 +1712,17 @@ QOpenGLTexture::~QOpenGLTexture()
 }
 
 /*!
+    Returns the binding target of this texture.
+
+    \since 5.4
+*/
+QOpenGLTexture::Target QOpenGLTexture::target() const
+{
+    Q_D(const QOpenGLTexture);
+    return d->target;
+}
+
+/*!
     Creates the underlying OpenGL texture object. This requires a current valid
     OpenGL context. If the texture object already exists, this function does
     nothing.
@@ -1820,6 +2060,7 @@ void QOpenGLTexture::setFormat(TextureFormat format)
     case D32:
     case D32F:
     case D32FS8X24:
+    case S8:
     case DepthFormat:
     case AlphaFormat:
     case RGBFormat:
@@ -2063,6 +2304,125 @@ int QOpenGLTexture::faces() const
 }
 
 /*!
+    Sets the number of \a samples to allocate storage for when rendering to
+    a multisample capable texture target. This function should
+    be called before storage is allocated for the texture.
+
+    For targets that do not support multisampling this function has
+    no effect.
+
+    \sa samples(), isStorageAllocated()
+*/
+void QOpenGLTexture::setSamples(int samples)
+{
+    Q_D(QOpenGLTexture);
+    d->create();
+    if (isStorageAllocated()) {
+        qWarning("Cannot set sample count on a texture that already has storage allocated.\n"
+                 "To do so, destroy() the texture and then create() and setSamples()");
+        return;
+    }
+
+    switch (d->target) {
+    case QOpenGLTexture::Target2DMultisample:
+    case QOpenGLTexture::Target2DMultisampleArray:
+        d->samples = samples;
+        break;
+
+    case QOpenGLTexture::Target1D:
+    case QOpenGLTexture::Target2D:
+    case QOpenGLTexture::Target3D:
+    case QOpenGLTexture::Target1DArray:
+    case QOpenGLTexture::Target2DArray:
+    case QOpenGLTexture::TargetCubeMap:
+    case QOpenGLTexture::TargetCubeMapArray:
+    case QOpenGLTexture::TargetBuffer:
+    case QOpenGLTexture::TargetRectangle:
+
+        qWarning("Texture target does not support multisampling");
+        break;
+    }
+}
+
+/*!
+    Returns the number of multisample sample points for this texture.
+    If storage has not yet been allocated for this texture then
+    this function returns the requested number of samples.
+
+    For texture targets that do not support multisampling this
+    will return 0.
+
+    \sa setSamples(), isStorageAllocated()
+*/
+int QOpenGLTexture::samples() const
+{
+    Q_D(const QOpenGLTexture);
+    return d->samples;
+}
+
+/*!
+    Sets whether the sample positions and number of samples used with
+    a multisample capable texture target to \a fixed. If set to \c true
+    the sample positions and number of samples used are the same for
+    all texels in the image and will not depend upon the image size or
+    internal format. This function should be called before storage is allocated
+    for the texture.
+
+    For targets that do not support multisampling this function has
+    no effect.
+
+    The default value is \c true.
+
+    \sa isFixedSamplePositions(), isStorageAllocated()
+*/
+void QOpenGLTexture::setFixedSamplePositions(bool fixed)
+{
+    Q_D(QOpenGLTexture);
+    d->create();
+    if (isStorageAllocated()) {
+        qWarning("Cannot set sample positions on a texture that already has storage allocated.\n"
+                 "To do so, destroy() the texture and then create() and setFixedSamplePositions()");
+        return;
+    }
+
+    switch (d->target) {
+    case QOpenGLTexture::Target2DMultisample:
+    case QOpenGLTexture::Target2DMultisampleArray:
+        d->fixedSamplePositions = fixed;
+        break;
+
+    case QOpenGLTexture::Target1D:
+    case QOpenGLTexture::Target2D:
+    case QOpenGLTexture::Target3D:
+    case QOpenGLTexture::Target1DArray:
+    case QOpenGLTexture::Target2DArray:
+    case QOpenGLTexture::TargetCubeMap:
+    case QOpenGLTexture::TargetCubeMapArray:
+    case QOpenGLTexture::TargetBuffer:
+    case QOpenGLTexture::TargetRectangle:
+
+        qWarning("Texture target does not support multisampling");
+        break;
+    }
+}
+
+/*!
+    Returns whether this texture uses a fixed pattern of multisample
+    samples. If storage has not yet been allocated for this texture then
+    this function returns the requested fixed sample position setting.
+
+    For texture targets that do not support multisampling this
+    will return \c true.
+
+    \sa setFixedSamplePositions(), isStorageAllocated()
+*/
+bool QOpenGLTexture::isFixedSamplePositions() const
+{
+    Q_D(const QOpenGLTexture);
+    return d->fixedSamplePositions;
+}
+
+/*!
     Allocates server-side storage for this texture object taking
     into account, the format, dimensions, mipmap levels, array
     layers and cubemap faces.
@@ -2298,7 +2658,16 @@ void QOpenGLTexture::setData(PixelFormat sourceFormat, PixelType sourceType,
 */
 void QOpenGLTexture::setData(const QImage& image, MipMapGeneration genMipMaps)
 {
-    setFormat(QOpenGLTexture::RGBA8_UNorm);
+    QOpenGLContext *context = QOpenGLContext::currentContext();
+    if (!context) {
+        qWarning("QOpenGLTexture::setData() requires a valid current context");
+        return;
+    }
+    if (context->isOpenGLES() && context->format().majorVersion() < 3)
+        setFormat(QOpenGLTexture::RGBAFormat);
+    else
+        setFormat(QOpenGLTexture::RGBA8_UNorm);
+
     setSize(image.width(), image.height());
     setMipLevels(genMipMaps == GenerateMipMaps ? maximumMipLevels() : 1);
     allocateStorage();
diff --git a/src/gui/opengl/qopengltexture.h b/src/gui/opengl/qopengltexture.h
index 0c272456f6..a53b1730b7 100644
--- a/src/gui/opengl/qopengltexture.h
+++ b/src/gui/opengl/qopengltexture.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -100,6 +92,8 @@ public:
     explicit QOpenGLTexture(const QImage& image, MipMapGeneration genMipMaps = GenerateMipMaps);
     ~QOpenGLTexture();
 
+    Target target() const;
+
     // Creation and destruction
     bool create();
     void destroy();
@@ -201,6 +195,7 @@ public:
         D32                    = 0x81A7,    // GL_DEPTH_COMPONENT32
         D32F                   = 0x8CAC,    // GL_DEPTH_COMPONENT32F
         D32FS8X24              = 0x8CAD,    // GL_DEPTH32F_STENCIL8
+        S8                     = 0x8D48,    // GL_STENCIL_INDEX8
 
         // Compressed formats
         RGB_DXT1               = 0x83F0,    // GL_COMPRESSED_RGB_S3TC_DXT1_EXT
@@ -272,6 +267,10 @@ public:
     void setLayers(int layers);
     int layers() const;
     int faces() const;
+    void setSamples(int samples);
+    int samples() const;
+    void setFixedSamplePositions(bool fixed);
+    bool isFixedSamplePositions() const;
     void allocateStorage();
     bool isStorageAllocated() const;
 
@@ -304,6 +303,7 @@ public:
         BGR_Integer    = 0x8D9A,    // GL_BGR_INTEGER
         RGBA_Integer   = 0x8D99,    // GL_RGBA_INTEGER
         BGRA_Integer   = 0x8D9B,    // GL_BGRA_INTEGER
+        Stencil        = 0x1901,    // GL_STENCIL_INDEX
         Depth          = 0x1902,    // GL_DEPTH_COMPONENT
         DepthStencil   = 0x84F9,    // GL_DEPTH_STENCIL
         Alpha          = 0x1906,    // GL_ALPHA
@@ -332,8 +332,12 @@ public:
         UInt16_R5G6B5_Rev  = 0x8364,    // GL_UNSIGNED_SHORT_5_6_5_REV
         UInt16_RGBA4       = 0x8033,    // GL_UNSIGNED_SHORT_4_4_4_4
         UInt16_RGBA4_Rev   = 0x8365,    // GL_UNSIGNED_SHORT_4_4_4_4_REV
+        UInt32_RGBA8       = 0x8035,    // GL_UNSIGNED_INT_8_8_8_8
+        UInt32_RGBA8_Rev   = 0x8367,    // GL_UNSIGNED_INT_8_8_8_8_REV
         UInt32_RGB10A2     = 0x8036,    // GL_UNSIGNED_INT_10_10_10_2
-        UInt32_RGB10A2_Rev = 0x8368     // GL_UNSIGNED_INT_2_10_10_10_REV
+        UInt32_RGB10A2_Rev = 0x8368,    // GL_UNSIGNED_INT_2_10_10_10_REV
+        UInt32_D24S8       = 0x84FA,    // GL_UNSIGNED_INT_24_8
+        Float32_D32_UInt32_S8_X24 = 0x8DAD // GL_FLOAT_32_UNSIGNED_INT_24_8_REV
     };
 
     // Pixel transfer
diff --git a/src/gui/opengl/qopengltexture_p.h b/src/gui/opengl/qopengltexture_p.h
index c50139ee59..b584d3ec8f 100644
--- a/src/gui/opengl/qopengltexture_p.h
+++ b/src/gui/opengl/qopengltexture_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengltextureblitter.cpp b/src/gui/opengl/qopengltextureblitter.cpp
index e6dbb70618..a20fb4f01e 100644
--- a/src/gui/opengl/qopengltextureblitter.cpp
+++ b/src/gui/opengl/qopengltextureblitter.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,8 +59,10 @@ static const char fragment_shader150[] =
     "out vec4 fragcolor;"
     "uniform sampler2D textureSampler;"
     "uniform bool swizzle;"
+    "uniform float opacity;"
     "void main() {"
     "   vec4 tmpFragColor = texture(textureSampler, uv);"
+    "   tmpFragColor.a *= opacity;"
     "   fragcolor = swizzle ? tmpFragColor.bgra : tmpFragColor;"
     "}";
 
@@ -87,8 +81,10 @@ static const char fragment_shader[] =
     "varying highp vec2 uv;"
     "uniform sampler2D textureSampler;"
     "uniform bool swizzle;"
+    "uniform highp float opacity;"
     "void main() {"
     "   highp vec4 tmpFragColor = texture2D(textureSampler,uv);"
+    "   tmpFragColor.a *= opacity;"
     "   gl_FragColor = swizzle ? tmpFragColor.bgra : tmpFragColor;"
     "}";
 
@@ -140,6 +136,8 @@ public:
         , textureTransformUniformPos(0)
         , swizzle(false)
         , swizzleOld(false)
+        , opacity(1.0f)
+        , opacityOld(0.0f)
         , textureMatrixUniformState(User)
         , vao(new QOpenGLVertexArrayObject())
     { }
@@ -165,6 +163,11 @@ public:
             program->setUniformValue(swizzleUniformPos, swizzle);
             swizzleOld = swizzle;
         }
+
+        if (opacity != opacityOld) {
+            program->setUniformValue(opacityUniformPos, opacity);
+            opacityOld = opacity;
+        }
     }
 
     QOpenGLBuffer vertexBuffer;
@@ -175,8 +178,11 @@ public:
     GLuint textureCoordAttribPos;
     GLuint textureTransformUniformPos;
     GLuint swizzleUniformPos;
+    GLuint opacityUniformPos;
     bool swizzle;
     bool swizzleOld;
+    float opacity;
+    float opacityOld;
     TextureMatrixUniform textureMatrixUniformState;
     QScopedPointer<QOpenGLVertexArrayObject> vao;
 };
@@ -224,6 +230,7 @@ QOpenGLTextureBlitter::QOpenGLTextureBlitter()
 
 QOpenGLTextureBlitter::~QOpenGLTextureBlitter()
 {
+    destroy();
 }
 
 bool QOpenGLTextureBlitter::create()
@@ -234,9 +241,6 @@ bool QOpenGLTextureBlitter::create()
 
     Q_D(QOpenGLTextureBlitter);
 
-    d->vao->create();
-    d->vao->bind();
-
     if (d->program)
         return true;
 
@@ -259,6 +263,9 @@ bool QOpenGLTextureBlitter::create()
 
     d->program->bind();
 
+    // Create and bind the VAO, if supported.
+    QOpenGLVertexArrayObject::Binder vaoBinder(d->vao.data());
+
     d->vertexBuffer.create();
     d->vertexBuffer.bind();
     d->vertexBuffer.allocate(vertex_buffer_data, sizeof(vertex_buffer_data));
@@ -274,11 +281,10 @@ bool QOpenGLTextureBlitter::create()
     d->textureCoordAttribPos = d->program->attributeLocation("textureCoord");
     d->textureTransformUniformPos = d->program->uniformLocation("textureTransform");
     d->swizzleUniformPos = d->program->uniformLocation("swizzle");
+    d->opacityUniformPos = d->program->uniformLocation("opacity");
 
     d->program->setUniformValue(d->swizzleUniformPos,false);
 
-    d->vao->release();
-
     return true;
 }
 
@@ -290,6 +296,8 @@ bool QOpenGLTextureBlitter::isCreated() const
 
 void QOpenGLTextureBlitter::destroy()
 {
+    if (!isCreated())
+        return;
     Q_D(QOpenGLTextureBlitter);
     d->program.reset();
     d->vertexBuffer.destroy();
@@ -301,7 +309,8 @@ void QOpenGLTextureBlitter::bind()
 {
     Q_D(QOpenGLTextureBlitter);
 
-    d->vao->bind();
+    if (d->vao->isCreated())
+        d->vao->bind();
 
     d->program->bind();
 
@@ -320,7 +329,8 @@ void QOpenGLTextureBlitter::release()
 {
     Q_D(QOpenGLTextureBlitter);
     d->program->release();
-    d->vao->release();
+    if (d->vao->isCreated())
+        d->vao->release();
 }
 
 void QOpenGLTextureBlitter::setSwizzleRB(bool swizzle)
@@ -329,6 +339,12 @@ void QOpenGLTextureBlitter::setSwizzleRB(bool swizzle)
     d->swizzle = swizzle;
 }
 
+void QOpenGLTextureBlitter::setOpacity(float opacity)
+{
+    Q_D(QOpenGLTextureBlitter);
+    d->opacity = opacity;
+}
+
 void QOpenGLTextureBlitter::blit(GLuint texture,
                                  const QMatrix4x4 &targetTransform,
                                  Origin sourceOrigin)
diff --git a/src/gui/opengl/qopengltextureblitter_p.h b/src/gui/opengl/qopengltextureblitter_p.h
index 44b442f50e..ac5fbae3a3 100644
--- a/src/gui/opengl/qopengltextureblitter_p.h
+++ b/src/gui/opengl/qopengltextureblitter_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -80,6 +72,7 @@ public:
     void release();
 
     void setSwizzleRB(bool swizzle);
+    void setOpacity(float opacity);
 
     void blit(GLuint texture, const QMatrix4x4 &targetTransform, Origin sourceOrigin);
     void blit(GLuint texture, const QMatrix4x4 &targetTransform, const QMatrix3x3 &sourceTransform);
diff --git a/src/gui/opengl/qopengltexturecache.cpp b/src/gui/opengl/qopengltexturecache.cpp
index f4aa29ac0f..3b24e1f576 100644
--- a/src/gui/opengl/qopengltexturecache.cpp
+++ b/src/gui/opengl/qopengltexturecache.cpp
@@ -1,52 +1,66 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qopengltexturecache_p.h"
+#include <qmath.h>
 #include <qopenglfunctions.h>
 #include <private/qopenglcontext_p.h>
+#include <private/qopenglextensions_p.h>
 #include <private/qimagepixmapcleanuphooks_p.h>
 #include <qpa/qplatformpixmap.h>
 
 QT_BEGIN_NAMESPACE
 
+#ifndef GL_RGB10_A2
+#define GL_RGB10_A2                       0x8059
+#endif
+
+#ifndef GL_BGR
+#define GL_BGR 0x80E0
+#endif
+
+#ifndef GL_BGRA
+#define GL_BGRA 0x80E1
+#endif
+
+#ifndef GL_UNSIGNED_INT_8_8_8_8_REV
+#define GL_UNSIGNED_INT_8_8_8_8_REV       0x8367
+#endif
+
+#ifndef GL_UNSIGNED_INT_2_10_10_10_REV
+#define GL_UNSIGNED_INT_2_10_10_10_REV    0x8368
+#endif
+
 class QOpenGLTextureCacheWrapper
 {
 public:
@@ -106,7 +120,7 @@ QOpenGLTextureCache::~QOpenGLTextureCache()
 {
 }
 
-GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QPixmap &pixmap)
+GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QPixmap &pixmap, BindOptions options)
 {
     if (pixmap.isNull())
         return 0;
@@ -116,34 +130,20 @@ GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QPixmap &
     // A QPainter is active on the image - take the safe route and replace the texture.
     if (!pixmap.paintingActive()) {
         QOpenGLCachedTexture *entry = m_cache.object(key);
-        if (entry) {
+        if (entry && entry->options() == options) {
             context->functions()->glBindTexture(GL_TEXTURE_2D, entry->id());
             return entry->id();
         }
     }
 
-    GLuint id = bindTexture(context, key, pixmap.toImage());
+    GLuint id = bindTexture(context, key, pixmap.toImage(), options);
     if (id > 0)
         QImagePixmapCleanupHooks::enableCleanupHooks(pixmap);
 
     return id;
 }
 
-// returns the highest number closest to v, which is a power of 2
-// NB! assumes 32 bit ints
-static int qt_next_power_of_two(int v)
-{
-    v--;
-    v |= v >> 1;
-    v |= v >> 2;
-    v |= v >> 4;
-    v |= v >> 8;
-    v |= v >> 16;
-    ++v;
-    return v;
-}
-
-GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QImage &image)
+GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QImage &image, BindOptions options)
 {
     if (image.isNull())
         return 0;
@@ -153,7 +153,7 @@ GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QImage &i
     // A QPainter is active on the image - take the safe route and replace the texture.
     if (!image.paintingActive()) {
         QOpenGLCachedTexture *entry = m_cache.object(key);
-        if (entry) {
+        if (entry && entry->options() == options) {
             context->functions()->glBindTexture(GL_TEXTURE_2D, entry->id());
             return entry->id();
         }
@@ -164,33 +164,149 @@ GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, const QImage &i
         // Scale the pixmap if needed. GL textures needs to have the
         // dimensions 2^n+2(border) x 2^m+2(border), unless we're using GL
         // 2.0 or use the GL_TEXTURE_RECTANGLE texture target
-        int tx_w = qt_next_power_of_two(image.width());
-        int tx_h = qt_next_power_of_two(image.height());
+        int tx_w = qNextPowerOfTwo(image.width() - 1);
+        int tx_h = qNextPowerOfTwo(image.height() - 1);
         if (tx_w != image.width() || tx_h != image.height()) {
             img = img.scaled(tx_w, tx_h);
         }
     }
 
-    GLuint id = bindTexture(context, key, img);
+    GLuint id = bindTexture(context, key, img, options);
     if (id > 0)
         QImagePixmapCleanupHooks::enableCleanupHooks(image);
 
     return id;
 }
 
-GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, qint64 key, const QImage &image)
+GLuint QOpenGLTextureCache::bindTexture(QOpenGLContext *context, qint64 key, const QImage &image, BindOptions options)
 {
     GLuint id;
     QOpenGLFunctions *funcs = context->functions();
     funcs->glGenTextures(1, &id);
     funcs->glBindTexture(GL_TEXTURE_2D, id);
 
-    QImage tx = image.convertToFormat(QImage::Format_RGBA8888_Premultiplied);
+    QImage tx;
+    GLenum externalFormat;
+    GLenum internalFormat;
+    GLuint pixelType;
+    QImage::Format targetFormat = QImage::Format_Invalid;
+    const bool isOpenGL12orBetter = !context->isOpenGLES() && (context->format().majorVersion() >= 2 || context->format().minorVersion() >= 2);
+
+    switch (image.format()) {
+    case QImage::Format_RGB32:
+    case QImage::Format_ARGB32:
+    case QImage::Format_ARGB32_Premultiplied:
+        if (isOpenGL12orBetter) {
+            externalFormat = GL_BGRA;
+            internalFormat = GL_RGBA;
+            pixelType = GL_UNSIGNED_INT_8_8_8_8_REV;
+        } else  {
+#if Q_BYTE_ORDER == Q_BIG_ENDIAN
+            // Without GL_UNSIGNED_INT_8_8_8_8_REV, BGRA only matches ARGB on little endian.
+            break;
+#endif
+            if (static_cast<QOpenGLExtensions*>(context->functions())->hasOpenGLExtension(QOpenGLExtensions::BGRATextureFormat)) {
+                // GL_EXT_bgra or GL_EXT_texture_format_BGRA8888 extensions.
+                if (context->isOpenGLES()) {
+                    // The GL_EXT_texture_format_BGRA8888 extension requires the internal format to match the external.
+                    externalFormat = internalFormat = GL_BGRA;
+                } else {
+                    // OpenGL BGRA/BGR format is not allowed as an internal format
+                    externalFormat = GL_BGRA;
+                    internalFormat = GL_RGBA;
+                }
+                pixelType = GL_UNSIGNED_BYTE;
+            } else if (context->isOpenGLES() && context->hasExtension(QByteArrayLiteral("GL_APPLE_texture_format_BGRA8888"))) {
+                // Is only allowed as an external format like OpenGL.
+                externalFormat = GL_BGRA;
+                internalFormat = GL_RGBA;
+                pixelType = GL_UNSIGNED_BYTE;
+            } else {
+                // No support for direct ARGB32 upload.
+                break;
+            }
+        }
+        targetFormat = image.format();
+        break;
+    case QImage::Format_BGR30:
+    case QImage::Format_A2BGR30_Premultiplied:
+        if (isOpenGL12orBetter || (context->isOpenGLES() && context->format().majorVersion() >= 3)) {
+            pixelType = GL_UNSIGNED_INT_2_10_10_10_REV;
+            externalFormat = GL_RGBA;
+            internalFormat = GL_RGB10_A2;
+            targetFormat =  image.format();
+        }
+        break;
+    case QImage::Format_RGB30:
+    case QImage::Format_A2RGB30_Premultiplied:
+        if (isOpenGL12orBetter) {
+            pixelType = GL_UNSIGNED_INT_2_10_10_10_REV;
+            externalFormat = GL_BGRA;
+            internalFormat = GL_RGB10_A2;
+            targetFormat = image.format();
+        } else if (context->isOpenGLES() && context->format().majorVersion() >= 3) {
+            pixelType = GL_UNSIGNED_INT_2_10_10_10_REV;
+            externalFormat = GL_RGBA;
+            internalFormat = GL_RGB10_A2;
+            targetFormat = QImage::Format_A2BGR30_Premultiplied;
+        }
+        break;
+    case QImage::Format_RGB444:
+    case QImage::Format_RGB555:
+    case QImage::Format_RGB16:
+        if (isOpenGL12orBetter || context->isOpenGLES()) {
+            externalFormat = internalFormat = GL_RGB;
+            pixelType = GL_UNSIGNED_SHORT_5_6_5;
+            targetFormat = QImage::Format_RGB16;
+        }
+        break;
+    case QImage::Format_RGB666:
+    case QImage::Format_RGB888:
+        externalFormat = internalFormat = GL_RGB;
+        pixelType = GL_UNSIGNED_BYTE;
+        targetFormat = QImage::Format_RGB888;
+        break;
+    case QImage::Format_RGBX8888:
+    case QImage::Format_RGBA8888:
+    case QImage::Format_RGBA8888_Premultiplied:
+        externalFormat = internalFormat = GL_RGBA;
+        pixelType = GL_UNSIGNED_BYTE;
+        targetFormat = image.format();
+        break;
+    default:
+        break;
+    }
+
+    if (targetFormat == QImage::Format_Invalid) {
+        externalFormat = internalFormat = GL_RGBA;
+        pixelType = GL_UNSIGNED_BYTE;
+        if (!image.hasAlphaChannel())
+            targetFormat = QImage::Format_RGBX8888;
+        else
+            targetFormat = QImage::Format_RGBA8888;
+    }
+
+    if (options & PremultipliedAlphaBindOption) {
+        if (targetFormat == QImage::Format_ARGB32)
+            targetFormat = QImage::Format_ARGB32_Premultiplied;
+        else if (targetFormat == QImage::Format_RGBA8888)
+            targetFormat = QImage::Format_RGBA8888_Premultiplied;
+    } else {
+        if (targetFormat == QImage::Format_ARGB32_Premultiplied)
+            targetFormat = QImage::Format_ARGB32;
+        else if (targetFormat == QImage::Format_RGBA8888_Premultiplied)
+            targetFormat = QImage::Format_RGBA8888;
+    }
+
+    if (image.format() != targetFormat)
+        tx = image.convertToFormat(targetFormat);
+    else
+        tx = image;
 
-    funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, tx.width(), tx.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, const_cast<const QImage &>(tx).bits());
+    funcs->glTexImage2D(GL_TEXTURE_2D, 0, internalFormat, tx.width(), tx.height(), 0, externalFormat, pixelType, const_cast<const QImage &>(tx).bits());
 
-    int cost = tx.width() * tx.height() * 4 / 1024;
-    m_cache.insert(key, new QOpenGLCachedTexture(id, context), cost);
+    int cost = tx.width() * tx.height() * tx.depth() / (1024 * 8);
+    m_cache.insert(key, new QOpenGLCachedTexture(id, options, context), cost);
 
     return id;
 }
@@ -216,7 +332,7 @@ static void freeTexture(QOpenGLFunctions *funcs, GLuint id)
     funcs->glDeleteTextures(1, &id);
 }
 
-QOpenGLCachedTexture::QOpenGLCachedTexture(GLuint id, QOpenGLContext *context)
+QOpenGLCachedTexture::QOpenGLCachedTexture(GLuint id, int options, QOpenGLContext *context) : m_options(options)
 {
     m_resource = new QOpenGLSharedResourceGuard(context, id, freeTexture);
 }
diff --git a/src/gui/opengl/qopengltexturecache_p.h b/src/gui/opengl/qopengltexturecache_p.h
index 2e82d5f373..f856054a85 100644
--- a/src/gui/opengl/qopengltexturecache_p.h
+++ b/src/gui/opengl/qopengltexturecache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,13 +56,15 @@ QT_BEGIN_NAMESPACE
 class QOpenGLCachedTexture
 {
 public:
-    QOpenGLCachedTexture(GLuint id, QOpenGLContext *context);
+    QOpenGLCachedTexture(GLuint id, int options, QOpenGLContext *context);
     ~QOpenGLCachedTexture() { m_resource->free(); }
 
     GLuint id() const { return m_resource->id(); }
+    int options() const { return m_options; }
 
 private:
     QOpenGLSharedResourceGuard *m_resource;
+    int m_options;
 };
 
 class Q_GUI_EXPORT QOpenGLTextureCache : public QOpenGLSharedResource
@@ -81,8 +75,14 @@ public:
     QOpenGLTextureCache(QOpenGLContext *);
     ~QOpenGLTextureCache();
 
-    GLuint bindTexture(QOpenGLContext *context, const QPixmap &pixmap);
-    GLuint bindTexture(QOpenGLContext *context, const QImage &image);
+    enum BindOption {
+        NoBindOption                            = 0x0000,
+        PremultipliedAlphaBindOption            = 0x0001,
+    };
+    Q_DECLARE_FLAGS(BindOptions, BindOption)
+
+    GLuint bindTexture(QOpenGLContext *context, const QPixmap &pixmap, QOpenGLTextureCache::BindOptions options = PremultipliedAlphaBindOption);
+    GLuint bindTexture(QOpenGLContext *context, const QImage &image, QOpenGLTextureCache::BindOptions options = PremultipliedAlphaBindOption);
 
     void invalidate(qint64 key);
 
@@ -90,12 +90,14 @@ public:
     void freeResource(QOpenGLContext *ctx);
 
 private:
-    GLuint bindTexture(QOpenGLContext *context, qint64 key, const QImage &image);
+    GLuint bindTexture(QOpenGLContext *context, qint64 key, const QImage &image, QOpenGLTextureCache::BindOptions options);
 
     QMutex m_mutex;
     QCache<quint64, QOpenGLCachedTexture> m_cache;
 };
 
+Q_DECLARE_OPERATORS_FOR_FLAGS(QOpenGLTextureCache::BindOptions)
+
 QT_END_NAMESPACE
 
 #endif
diff --git a/src/gui/opengl/qopengltextureglyphcache.cpp b/src/gui/opengl/qopengltextureglyphcache.cpp
index 0610ab60ed..6e16b2df75 100644
--- a/src/gui/opengl/qopengltextureglyphcache.cpp
+++ b/src/gui/opengl/qopengltextureglyphcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengltextureglyphcache_p.h b/src/gui/opengl/qopengltextureglyphcache_p.h
index 5a4a4e4c92..f61f264526 100644
--- a/src/gui/opengl/qopengltextureglyphcache_p.h
+++ b/src/gui/opengl/qopengltextureglyphcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengltexturehelper.cpp b/src/gui/opengl/qopengltexturehelper.cpp
index 27aece8eca..29cecf0ea8 100644
--- a/src/gui/opengl/qopengltexturehelper.cpp
+++ b/src/gui/opengl/qopengltexturehelper.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -164,6 +156,60 @@ QOpenGLTextureHelper::QOpenGLTextureHelper(QOpenGLContext *context)
     TexSubImage2D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLint , GLint , GLsizei , GLsizei , GLenum , GLenum , const GLvoid *)>(GetProcAddress(handle, QByteArrayLiteral("glTexSubImage2D")));
     TexSubImage1D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLint , GLsizei , GLenum , GLenum , const GLvoid *)>(GetProcAddress(handle, QByteArrayLiteral("glTexSubImage1D")));
 
+#elif defined(QT_OPENGL_ES_2)
+    // Here we are targeting OpenGL ES 2.0+ only. This is likely using EGL, where,
+    // similarly to WGL, non-extension functions (i.e. any function that is part of the
+    // GLES spec) *may* not be queried via eglGetProcAddress.
+
+    // OpenGL 1.0
+    GetIntegerv = ::glGetIntegerv;
+    GetBooleanv = ::glGetBooleanv;
+    PixelStorei = ::glPixelStorei;
+    GetTexLevelParameteriv = 0;
+    GetTexLevelParameterfv = 0;
+    GetTexParameteriv = ::glGetTexParameteriv;
+    GetTexParameterfv = ::glGetTexParameterfv;
+    GetTexImage = 0;
+    TexImage2D = ::glTexImage2D;
+    TexImage1D = 0;
+    TexParameteriv = ::glTexParameteriv;
+    TexParameteri = ::glTexParameteri;
+    TexParameterfv = ::glTexParameterfv;
+    TexParameterf = ::glTexParameterf;
+
+    // OpenGL 1.1
+    GenTextures = ::glGenTextures;
+    DeleteTextures = ::glDeleteTextures;
+    BindTexture = ::glBindTexture;
+    TexSubImage2D = ::glTexSubImage2D;
+    TexSubImage1D = 0;
+
+    // OpenGL 1.3
+    GetCompressedTexImage = 0;
+    CompressedTexSubImage1D = 0;
+    CompressedTexSubImage2D = ::glCompressedTexSubImage2D;
+    CompressedTexImage1D = 0;
+    CompressedTexImage2D = ::glCompressedTexImage2D;
+    ActiveTexture = ::glActiveTexture;
+
+    // OpenGL 3.0
+    GenerateMipmap = ::glGenerateMipmap;
+
+    // OpenGL 3.2
+    TexImage3DMultisample = 0;
+    TexImage2DMultisample = 0;
+
+    // OpenGL 4.2
+    TexStorage3D = 0;
+    TexStorage2D = 0;
+    TexStorage1D = 0;
+
+    // OpenGL 4.3
+    TexStorage3DMultisample = 0;
+    TexStorage2DMultisample = 0;
+    TexBufferRange = 0;
+    TextureView = 0;
+
 #else
 
     // OpenGL 1.0
@@ -196,6 +242,13 @@ QOpenGLTextureHelper::QOpenGLTextureHelper(QOpenGLContext *context)
         CompressedTexImage3D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum, GLint, GLenum, GLsizei, GLsizei, GLsizei, GLint, GLsizei, const GLvoid*)>(context->getProcAddress(QByteArrayLiteral("glCompressedTexImage3DOES")));
         CompressedTexSubImage3D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum, GLint, GLint, GLint, GLint, GLsizei, GLsizei, GLsizei, GLenum, GLsizei, const GLvoid*)>(context->getProcAddress(QByteArrayLiteral("glCompressedTexSubImage3DOES")));
     } else {
+#ifdef QT_OPENGL_ES_3
+        // OpenGL ES 3.0+ has glTexImage3D.
+        TexImage3D = ::glTexImage3D;
+        TexSubImage3D = ::glTexSubImage3D;
+        CompressedTexImage3D = ::glCompressedTexImage3D;
+        CompressedTexSubImage3D = ::glCompressedTexSubImage3D;
+#else
         // OpenGL 1.2
         TexImage3D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLint , GLsizei , GLsizei , GLsizei , GLint , GLenum , GLenum , const GLvoid *)>(context->getProcAddress(QByteArrayLiteral("glTexImage3D")));
         TexSubImage3D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLint , GLint , GLint , GLsizei , GLsizei , GLsizei , GLenum , GLenum , const GLvoid *)>(context->getProcAddress(QByteArrayLiteral("glTexSubImage3D")));
@@ -203,8 +256,10 @@ QOpenGLTextureHelper::QOpenGLTextureHelper(QOpenGLContext *context)
         // OpenGL 1.3
         CompressedTexImage3D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLenum , GLsizei , GLsizei , GLsizei , GLint , GLsizei , const GLvoid *)>(context->getProcAddress(QByteArrayLiteral("glCompressedTexImage3D")));
         CompressedTexSubImage3D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLint , GLint , GLint , GLsizei , GLsizei , GLsizei , GLenum , GLsizei , const GLvoid *)>(context->getProcAddress(QByteArrayLiteral("glCompressedTexSubImage3D")));
+#endif
     }
 
+#ifndef QT_OPENGL_ES_2
     // OpenGL 1.3
     GetCompressedTexImage = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLvoid *)>(context->getProcAddress(QByteArrayLiteral("glGetCompressedTexImage")));
     CompressedTexSubImage1D = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLint , GLint , GLsizei , GLenum , GLsizei , const GLvoid *)>(context->getProcAddress(QByteArrayLiteral("glCompressedTexSubImage1D")));
@@ -230,6 +285,7 @@ QOpenGLTextureHelper::QOpenGLTextureHelper(QOpenGLContext *context)
     TexStorage2DMultisample = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLsizei , GLenum , GLsizei , GLsizei , GLboolean )>(context->getProcAddress(QByteArrayLiteral("glTexStorage2DMultisample")));
     TexBufferRange = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLenum , GLenum , GLuint , GLintptr , GLsizeiptr )>(context->getProcAddress(QByteArrayLiteral("glTexBufferRange")));
     TextureView = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLuint , GLenum , GLuint , GLenum , GLuint , GLuint , GLuint , GLuint )>(context->getProcAddress(QByteArrayLiteral("glTextureView")));
+#endif
 }
 
 void QOpenGLTextureHelper::dsa_TextureParameteri(GLuint texture, GLenum target, GLenum bindingTarget, GLenum pname, GLint param)
diff --git a/src/gui/opengl/qopengltexturehelper_p.h b/src/gui/opengl/qopengltexturehelper_p.h
index a920a08c71..7145f689ce 100644
--- a/src/gui/opengl/qopengltexturehelper_p.h
+++ b/src/gui/opengl/qopengltexturehelper_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengltimerquery.cpp b/src/gui/opengl/qopengltimerquery.cpp
index 5159ec58fc..253c4d2a9f 100644
--- a/src/gui/opengl/qopengltimerquery.cpp
+++ b/src/gui/opengl/qopengltimerquery.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopengltimerquery.h b/src/gui/opengl/qopengltimerquery.h
index c1cada9bdb..03e08114d5 100644
--- a/src/gui/opengl/qopengltimerquery.h
+++ b/src/gui/opengl/qopengltimerquery.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglversionfunctions.cpp b/src/gui/opengl/qopenglversionfunctions.cpp
index fe709eba8d..74e230a180 100644
--- a/src/gui/opengl/qopenglversionfunctions.cpp
+++ b/src/gui/opengl/qopenglversionfunctions.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
@@ -229,7 +221,9 @@ QOpenGLFunctions_1_0_CoreBackend::QOpenGLFunctions_1_0_CoreBackend(QOpenGLContex
 {
     // OpenGL 1.0 core functions
 #if defined(Q_OS_WIN)
-    HMODULE handle = GetModuleHandleA("opengl32.dll");
+    HMODULE handle = static_cast<HMODULE>(QOpenGLContext::openGLModuleHandle());
+    if (!handle)
+        handle = GetModuleHandleA("opengl32.dll");
     Viewport = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLint , GLint , GLsizei , GLsizei )>(GetProcAddress(handle, "glViewport"));
     DepthRange = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLdouble , GLdouble )>(GetProcAddress(handle, "glDepthRange"));
     IsEnabled = reinterpret_cast<GLboolean (QOPENGLF_APIENTRYP)(GLenum )>(GetProcAddress(handle, "glIsEnabled"));
@@ -341,7 +335,9 @@ QOpenGLFunctions_1_1_CoreBackend::QOpenGLFunctions_1_1_CoreBackend(QOpenGLContex
 {
     // OpenGL 1.1 core functions
 #if defined(Q_OS_WIN)
-    HMODULE handle = GetModuleHandleA("opengl32.dll");
+    HMODULE handle = static_cast<HMODULE>(QOpenGLContext::openGLModuleHandle());
+    if (!handle)
+        handle = GetModuleHandleA("opengl32.dll");
     Indexubv = reinterpret_cast<void (QOPENGLF_APIENTRYP)(const GLubyte *)>(GetProcAddress(handle, "glIndexubv"));
     Indexub = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLubyte )>(GetProcAddress(handle, "glIndexub"));
     IsTexture = reinterpret_cast<GLboolean (QOPENGLF_APIENTRYP)(GLuint )>(GetProcAddress(handle, "glIsTexture"));
@@ -993,7 +989,9 @@ QOpenGLFunctions_1_0_DeprecatedBackend::QOpenGLFunctions_1_0_DeprecatedBackend(Q
 {
     // OpenGL 1.0 deprecated functions
 #if defined(Q_OS_WIN)
-    HMODULE handle = GetModuleHandleA("opengl32.dll");
+    HMODULE handle = static_cast<HMODULE>(QOpenGLContext::openGLModuleHandle());
+    if (!handle)
+        handle = GetModuleHandleA("opengl32.dll");
     Translatef = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLfloat , GLfloat , GLfloat )>(GetProcAddress(handle, "glTranslatef"));
     Translated = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLdouble , GLdouble , GLdouble )>(GetProcAddress(handle, "glTranslated"));
     Scalef = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLfloat , GLfloat , GLfloat )>(GetProcAddress(handle, "glScalef"));
@@ -1525,7 +1523,9 @@ QOpenGLFunctions_1_1_DeprecatedBackend::QOpenGLFunctions_1_1_DeprecatedBackend(Q
 {
     // OpenGL 1.1 deprecated functions
 #if defined(Q_OS_WIN)
-    HMODULE handle = GetModuleHandleA("opengl32.dll");
+    HMODULE handle = static_cast<HMODULE>(QOpenGLContext::openGLModuleHandle());
+    if (!handle)
+        handle = GetModuleHandleA("opengl32.dll");
     PushClientAttrib = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLbitfield )>(GetProcAddress(handle, "glPushClientAttrib"));
     PopClientAttrib = reinterpret_cast<void (QOPENGLF_APIENTRYP)()>(GetProcAddress(handle, "glPopClientAttrib"));
     PrioritizeTextures = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , const GLuint *, const GLfloat *)>(GetProcAddress(handle, "glPrioritizeTextures"));
diff --git a/src/gui/opengl/qopenglversionfunctions.h b/src/gui/opengl/qopenglversionfunctions.h
index 304b944de8..f2007639d2 100644
--- a/src/gui/opengl/qopenglversionfunctions.h
+++ b/src/gui/opengl/qopenglversionfunctions.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
@@ -77,13 +69,13 @@ struct QOpenGLVersionStatus
         InvalidStatus
     };
 
-    QOpenGLVersionStatus()
-        : version(qMakePair(0, 0)),
+    Q_DECL_CONSTEXPR QOpenGLVersionStatus()
+        : version(0, 0),
           status(InvalidStatus)
     {}
 
-    QOpenGLVersionStatus(int majorVersion, int minorVersion, QOpenGLVersionStatus::OpenGLStatus functionStatus)
-        : version(qMakePair(majorVersion, minorVersion)),
+    Q_DECL_CONSTEXPR QOpenGLVersionStatus(int majorVersion, int minorVersion, QOpenGLVersionStatus::OpenGLStatus functionStatus)
+        : version(majorVersion, minorVersion),
           status(functionStatus)
     {}
 
@@ -91,20 +83,18 @@ struct QOpenGLVersionStatus
     OpenGLStatus status;
 };
 
-inline uint qHash(const QOpenGLVersionStatus &v, uint seed = 0)
+inline uint qHash(const QOpenGLVersionStatus &v, uint seed = 0) Q_DECL_NOTHROW
 {
     return qHash(static_cast<int>(v.status * 1000)
                + v.version.first * 100 + v.version.second * 10, seed);
 }
 
-inline bool operator==(const QOpenGLVersionStatus &lhs, const QOpenGLVersionStatus &rhs)
+Q_DECL_CONSTEXPR inline bool operator==(const QOpenGLVersionStatus &lhs, const QOpenGLVersionStatus &rhs)
 {
-    if (lhs.status != rhs.status)
-        return false;
-    return lhs.version == rhs.version;
+    return lhs.status == rhs.status && lhs.version == rhs.version;
 }
 
-inline bool operator!=(const QOpenGLVersionStatus &lhs, const QOpenGLVersionStatus &rhs)
+Q_DECL_CONSTEXPR inline bool operator!=(const QOpenGLVersionStatus &lhs, const QOpenGLVersionStatus &rhs)
 {
     return !operator==(lhs, rhs);
 }
diff --git a/src/gui/opengl/qopenglversionfunctionsfactory.cpp b/src/gui/opengl/qopenglversionfunctionsfactory.cpp
index fed2c1537a..35fe14ca54 100644
--- a/src/gui/opengl/qopenglversionfunctionsfactory.cpp
+++ b/src/gui/opengl/qopenglversionfunctionsfactory.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglversionfunctionsfactory_p.h b/src/gui/opengl/qopenglversionfunctionsfactory_p.h
index c644bc9082..00a26f1112 100644
--- a/src/gui/opengl/qopenglversionfunctionsfactory_p.h
+++ b/src/gui/opengl/qopenglversionfunctionsfactory_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 **
diff --git a/src/gui/opengl/qopenglvertexarrayobject.cpp b/src/gui/opengl/qopenglvertexarrayobject.cpp
index 5ebfc9a9c8..5520dfed08 100644
--- a/src/gui/opengl/qopenglvertexarrayobject.cpp
+++ b/src/gui/opengl/qopenglvertexarrayobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Klaralvdalens Datakonsult AB (KDAB).
+** Copyright (C) 2014 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Sean Harmer <sean.harmer@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -49,55 +41,53 @@
 #include <QtGui/qopenglfunctions_3_0.h>
 #include <QtGui/qopenglfunctions_3_2_core.h>
 
+#include <private/qopenglvertexarrayobject_p.h>
+
 QT_BEGIN_NAMESPACE
 
 class QOpenGLFunctions_3_0;
 class QOpenGLFunctions_3_2_Core;
 
-class QVertexArrayObjectHelper
+void qtInitializeVertexArrayObjectHelper(QOpenGLVertexArrayObjectHelper *helper, QOpenGLContext *context)
 {
-public:
-    QVertexArrayObjectHelper(QOpenGLContext *context)
-    {
-        Q_ASSERT(context);
-        if (context->isOpenGLES()) {
-            GenVertexArrays = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , GLuint *)>(context->getProcAddress(QByteArrayLiteral("glGenVertexArraysOES")));
-            DeleteVertexArrays = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , const GLuint *)>(context->getProcAddress(QByteArrayLiteral("glDeleteVertexArraysOES")));
-            BindVertexArray = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLuint )>(context->getProcAddress(QByteArrayLiteral("glBindVertexArrayOES")));
-        } else {
-            if (context->hasExtension(QByteArrayLiteral("GL_APPLE_vertex_array_object"))) {
-                GenVertexArrays = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , GLuint *)>(context->getProcAddress(QByteArrayLiteral("glGenVertexArraysAPPLE")));
-                DeleteVertexArrays = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , const GLuint *)>(context->getProcAddress(QByteArrayLiteral("glDeleteVertexArraysAPPLE")));
-                BindVertexArray = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLuint )>(context->getProcAddress(QByteArrayLiteral("glBindVertexArrayAPPLE")));
-            } else {
-                GenVertexArrays = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , GLuint *)>(context->getProcAddress(QByteArrayLiteral("glGenVertexArrays")));
-                DeleteVertexArrays = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLsizei , const GLuint *)>(context->getProcAddress(QByteArrayLiteral("glDeleteVertexArrays")));
-                BindVertexArray = reinterpret_cast<void (QOPENGLF_APIENTRYP)(GLuint )>(context->getProcAddress(QByteArrayLiteral("glBindVertexArray")));
-            }
-        }
-    }
+    Q_ASSERT(helper);
+    Q_ASSERT(context);
 
-    inline void glGenVertexArrays(GLsizei n, GLuint *arrays)
-    {
-        GenVertexArrays(n, arrays);
-    }
+    bool tryARB = true;
 
-    inline void glDeleteVertexArrays(GLsizei n, const GLuint *arrays)
-    {
-        DeleteVertexArrays(n, arrays);
+    if (context->isOpenGLES()) {
+#ifdef QT_OPENGL_ES_3
+        if (context->format().majorVersion() >= 3) {
+            helper->GenVertexArrays = ::glGenVertexArrays;
+            helper->DeleteVertexArrays = ::glDeleteVertexArrays;
+            helper->BindVertexArray = ::glBindVertexArray;
+            helper->IsVertexArray = ::glIsVertexArray;
+            tryARB = false;
+        } else
+#endif
+        if (context->hasExtension(QByteArrayLiteral("GL_OES_vertex_array_object"))) {
+            helper->GenVertexArrays = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_GenVertexArrays_t>(context->getProcAddress(QByteArrayLiteral("glGenVertexArraysOES")));
+            helper->DeleteVertexArrays = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_DeleteVertexArrays_t>(context->getProcAddress(QByteArrayLiteral("glDeleteVertexArraysOES")));
+            helper->BindVertexArray = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_BindVertexArray_t>(context->getProcAddress(QByteArrayLiteral("glBindVertexArrayOES")));
+            helper->IsVertexArray = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_IsVertexArray_t>(context->getProcAddress(QByteArrayLiteral("glIsVertexArrayOES")));
+            tryARB = false;
+        }
+    } else if (context->hasExtension(QByteArrayLiteral("GL_APPLE_vertex_array_object")) &&
+               !context->hasExtension(QByteArrayLiteral("GL_ARB_vertex_array_object"))) {
+        helper->GenVertexArrays = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_GenVertexArrays_t>(context->getProcAddress(QByteArrayLiteral("glGenVertexArraysAPPLE")));
+        helper->DeleteVertexArrays = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_DeleteVertexArrays_t>(context->getProcAddress(QByteArrayLiteral("glDeleteVertexArraysAPPLE")));
+        helper->BindVertexArray = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_BindVertexArray_t>(context->getProcAddress(QByteArrayLiteral("glBindVertexArrayAPPLE")));
+        helper->IsVertexArray = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_IsVertexArray_t>(context->getProcAddress(QByteArrayLiteral("glIsVertexArrayAPPLE")));
+        tryARB = false;
     }
 
-    inline void glBindVertexArray(GLuint array)
-    {
-        BindVertexArray(array);
+    if (tryARB && context->hasExtension(QByteArrayLiteral("GL_ARB_vertex_array_object"))) {
+        helper->GenVertexArrays = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_GenVertexArrays_t>(context->getProcAddress(QByteArrayLiteral("glGenVertexArrays")));
+        helper->DeleteVertexArrays = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_DeleteVertexArrays_t>(context->getProcAddress(QByteArrayLiteral("glDeleteVertexArrays")));
+        helper->BindVertexArray = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_BindVertexArray_t>(context->getProcAddress(QByteArrayLiteral("glBindVertexArray")));
+        helper->IsVertexArray = reinterpret_cast<QOpenGLVertexArrayObjectHelper::qt_IsVertexArray_t>(context->getProcAddress(QByteArrayLiteral("glIsVertexArray")));
     }
-
-private:
-    // Function signatures are equivalent between desktop core, ARB, APPLE and ES 2 extensions
-    void (QOPENGLF_APIENTRYP GenVertexArrays)(GLsizei n, GLuint *arrays);
-    void (QOPENGLF_APIENTRYP DeleteVertexArrays)(GLsizei n, const GLuint *arrays);
-    void (QOPENGLF_APIENTRYP BindVertexArray)(GLuint array);
-};
+}
 
 class QOpenGLVertexArrayObjectPrivate : public QObjectPrivate
 {
@@ -128,7 +118,7 @@ public:
     union {
         QOpenGLFunctions_3_0 *core_3_0;
         QOpenGLFunctions_3_2_Core *core_3_2;
-        QVertexArrayObjectHelper *helper;
+        QOpenGLVertexArrayObjectHelper *helper;
     } vaoFuncs;
     enum {
         NotSupported,
@@ -160,8 +150,8 @@ bool QOpenGLVertexArrayObjectPrivate::create()
     QObject::connect(context, SIGNAL(aboutToBeDestroyed()), q, SLOT(_q_contextAboutToBeDestroyed()));
 
     if (ctx->isOpenGLES()) {
-        if (ctx->hasExtension(QByteArrayLiteral("GL_OES_vertex_array_object"))) {
-            vaoFuncs.helper = new QVertexArrayObjectHelper(ctx);
+        if (ctx->format().majorVersion() >= 3 || ctx->hasExtension(QByteArrayLiteral("GL_OES_vertex_array_object"))) {
+            vaoFuncs.helper = new QOpenGLVertexArrayObjectHelper(ctx);
             vaoFuncsType = OES;
             vaoFuncs.helper->glGenVertexArrays(1, &vao);
         }
@@ -183,11 +173,11 @@ bool QOpenGLVertexArrayObjectPrivate::create()
         } else
 #endif
         if (ctx->hasExtension(QByteArrayLiteral("GL_ARB_vertex_array_object"))) {
-            vaoFuncs.helper = new QVertexArrayObjectHelper(ctx);
+            vaoFuncs.helper = new QOpenGLVertexArrayObjectHelper(ctx);
             vaoFuncsType = ARB;
             vaoFuncs.helper->glGenVertexArrays(1, &vao);
         } else if (ctx->hasExtension(QByteArrayLiteral("GL_APPLE_vertex_array_object"))) {
-            vaoFuncs.helper = new QVertexArrayObjectHelper(ctx);
+            vaoFuncs.helper = new QOpenGLVertexArrayObjectHelper(ctx);
             vaoFuncsType = APPLE;
             vaoFuncs.helper->glGenVertexArrays(1, &vao);
         }
@@ -392,6 +382,16 @@ QOpenGLVertexArrayObject::~QOpenGLVertexArrayObject()
     that supports vertex array objects current for this function to succeed.
 
     Returns \c true if the OpenGL vertex array object was successfully created.
+
+    When the return value is \c false, vertex array object support is not available. This
+    is not an error: on systems with OpenGL 2.x or OpenGL ES 2.0 vertex array objects may
+    not be supported. The application is free to continue execution in this case, but it
+    then has to be prepared to operate in a VAO-less manner too. This means that instead
+    of merely calling bind(), the value of isCreated() must be checked and the vertex
+    arrays has to be initialized in the traditional way when there is no vertex array
+    object present.
+
+    \sa isCreated()
 */
 bool QOpenGLVertexArrayObject::create()
 {
diff --git a/src/gui/opengl/qopenglvertexarrayobject.h b/src/gui/opengl/qopenglvertexarrayobject.h
index 8369497660..56f8f95851 100644
--- a/src/gui/opengl/qopenglvertexarrayobject.h
+++ b/src/gui/opengl/qopenglvertexarrayobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Klaralvdalens Datakonsult AB (KDAB).
+** Copyright (C) 2014 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Sean Harmer <sean.harmer@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qopenglvertexarrayobject_p.h b/src/gui/opengl/qopenglvertexarrayobject_p.h
new file mode 100644
index 0000000000..366d7ae2f6
--- /dev/null
+++ b/src/gui/opengl/qopenglvertexarrayobject_p.h
@@ -0,0 +1,119 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Sean Harmer <sean.harmer@kdab.com>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QOPENGLVERTEXARRAYOBJECT_P_H
+#define QOPENGLVERTEXARRAYOBJECT_P_H
+
+//
+//  W A R N I N G
+//  -------------
+//
+// This file is not part of the Qt API.  It exists for the convenience
+// of the Qt OpenGL classes.  This header file may change from
+// version to version without notice, or even be removed.
+//
+// We mean it.
+//
+
+#include <QtCore/qglobal.h>
+
+#ifndef QT_NO_OPENGL
+
+#include <QtGui/qopengl.h>
+
+QT_BEGIN_NAMESPACE
+
+class QOpenGLVertexArrayObjectHelper;
+class QOpenGLContext;
+
+void Q_GUI_EXPORT qtInitializeVertexArrayObjectHelper(QOpenGLVertexArrayObjectHelper *helper, QOpenGLContext *context);
+
+class QOpenGLVertexArrayObjectHelper
+{
+    Q_DISABLE_COPY(QOpenGLVertexArrayObjectHelper)
+
+public:
+    explicit inline QOpenGLVertexArrayObjectHelper(QOpenGLContext *context)
+        : GenVertexArrays(Q_NULLPTR)
+        , DeleteVertexArrays(Q_NULLPTR)
+        , BindVertexArray(Q_NULLPTR)
+        , IsVertexArray(Q_NULLPTR)
+    {
+        qtInitializeVertexArrayObjectHelper(this, context);
+    }
+
+    inline bool isValid() const
+    {
+        return GenVertexArrays && DeleteVertexArrays && BindVertexArray && IsVertexArray;
+    }
+
+    inline void glGenVertexArrays(GLsizei n, GLuint *arrays) const
+    {
+        GenVertexArrays(n, arrays);
+    }
+
+    inline void glDeleteVertexArrays(GLsizei n, const GLuint *arrays) const
+    {
+        DeleteVertexArrays(n, arrays);
+    }
+
+    inline void glBindVertexArray(GLuint array) const
+    {
+        BindVertexArray(array);
+    }
+
+    inline GLboolean glIsVertexArray(GLuint array) const
+    {
+        return IsVertexArray(array);
+    }
+
+private:
+    friend void Q_GUI_EXPORT qtInitializeVertexArrayObjectHelper(QOpenGLVertexArrayObjectHelper *helper, QOpenGLContext *context);
+
+    // Function signatures are equivalent between desktop core, ARB, APPLE, ES 3 and ES 2 extensions
+    typedef void (QOPENGLF_APIENTRYP qt_GenVertexArrays_t)(GLsizei n, GLuint *arrays);
+    typedef void (QOPENGLF_APIENTRYP qt_DeleteVertexArrays_t)(GLsizei n, const GLuint *arrays);
+    typedef void (QOPENGLF_APIENTRYP qt_BindVertexArray_t)(GLuint array);
+    typedef GLboolean (QOPENGLF_APIENTRYP qt_IsVertexArray_t)(GLuint array);
+
+    qt_GenVertexArrays_t GenVertexArrays;
+    qt_DeleteVertexArrays_t DeleteVertexArrays;
+    qt_BindVertexArray_t BindVertexArray;
+    qt_IsVertexArray_t IsVertexArray;
+};
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_OPENGL
+
+#endif // QOPENGLVERTEXARRAYOBJECT_P_H
diff --git a/src/gui/opengl/qrbtree_p.h b/src/gui/opengl/qrbtree_p.h
index a48a049213..d63138ae09 100644
--- a/src/gui/opengl/qrbtree_p.h
+++ b/src/gui/opengl/qrbtree_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qtriangulatingstroker.cpp b/src/gui/opengl/qtriangulatingstroker.cpp
index 1d96e252d1..204c6a62ef 100644
--- a/src/gui/opengl/qtriangulatingstroker.cpp
+++ b/src/gui/opengl/qtriangulatingstroker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qtriangulatingstroker_p.h b/src/gui/opengl/qtriangulatingstroker_p.h
index dc3a13e698..79b5e8745f 100644
--- a/src/gui/opengl/qtriangulatingstroker_p.h
+++ b/src/gui/opengl/qtriangulatingstroker_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qtriangulator.cpp b/src/gui/opengl/qtriangulator.cpp
index 839ec9e96f..f44c8adcf5 100644
--- a/src/gui/opengl/qtriangulator.cpp
+++ b/src/gui/opengl/qtriangulator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/opengl/qtriangulator_p.h b/src/gui/opengl/qtriangulator_p.h
index 40fea78328..599db9470d 100644
--- a/src/gui/opengl/qtriangulator_p.h
+++ b/src/gui/opengl/qtriangulator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/painting.pri b/src/gui/painting/painting.pri
index ed45b8ea17..a5a395cce2 100644
--- a/src/gui/painting/painting.pri
+++ b/src/gui/painting/painting.pri
@@ -91,15 +91,13 @@ SOURCES += \
         painting/qpaintbuffer.cpp \
         painting/qpathsimplifier.cpp
 
-contains(QT_CPU_FEATURES.$$QT_ARCH, sse2) {
-    SOURCES += painting/qdrawhelper_sse2.cpp
-    SSSE3_SOURCES += painting/qdrawhelper_ssse3.cpp
-}
-IWMMXT_SOURCES += painting/qdrawhelper_iwmmxt.cpp
+SSE2_SOURCES += painting/qdrawhelper_sse2.cpp
+SSSE3_SOURCES += painting/qdrawhelper_ssse3.cpp
 
-!ios:contains(QT_CPU_FEATURES.$$QT_ARCH, neon) {
-    SOURCES += painting/qdrawhelper_neon.cpp
-    HEADERS += painting/qdrawhelper_neon_p.h
+!ios {
+    CONFIG += no_clang_integrated_as
+    NEON_SOURCES += painting/qdrawhelper_neon.cpp
+    NEON_HEADERS += painting/qdrawhelper_neon_p.h
     NEON_ASM += ../3rdparty/pixman/pixman-arm-neon-asm.S painting/qdrawhelper_neon_asm.S
 }
 
diff --git a/src/gui/painting/qbackingstore.cpp b/src/gui/painting/qbackingstore.cpp
index c44be64fb1..4298c0c447 100644
--- a/src/gui/painting/qbackingstore.cpp
+++ b/src/gui/painting/qbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qbackingstore.h b/src/gui/painting/qbackingstore.h
index 65efab2f48..86bd77d124 100644
--- a/src/gui/painting/qbackingstore.h
+++ b/src/gui/painting/qbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qbezier.cpp b/src/gui/painting/qbezier.cpp
index 33075b640d..90240d1752 100644
--- a/src/gui/painting/qbezier.cpp
+++ b/src/gui/painting/qbezier.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qbezier_p.h b/src/gui/painting/qbezier_p.h
index 3257fdce7c..3251cdeccb 100644
--- a/src/gui/painting/qbezier_p.h
+++ b/src/gui/painting/qbezier_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qblendfunctions.cpp b/src/gui/painting/qblendfunctions.cpp
index f22c37aecc..2da5dbb356 100644
--- a/src/gui/painting/qblendfunctions.cpp
+++ b/src/gui/painting/qblendfunctions.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -403,7 +395,168 @@ void qt_blend_rgb32_on_rgb32(uchar *destPixels, int dbpl,
     }
 }
 
+template<QtPixelOrder PixelOrder>
+static void qt_blend_argb32pm_on_a2rgb30pm(uchar *destPixels, int dbpl,
+                                           const uchar *srcPixels, int sbpl,
+                                           int w, int h,
+                                           int const_alpha)
+{
+#ifdef QT_DEBUG_DRAW
+    fprintf(stdout, "qt_blend_argb32pm_on_a2rgb30pm: dst=(%p, %d), src=(%p, %d), dim=(%d, %d) alpha=%d\n",
+            destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+    fflush(stdout);
+#endif
+
+    const uint *src = (const uint *) srcPixels;
+    uint *dst = (uint *) destPixels;
+    if (const_alpha == 256) {
+        for (int y=0; y<h; ++y) {
+            for (int x=0; x<w; ++x) {
+                uint s = src[x];
+                dst[x] = qConvertArgb32ToA2rgb30<PixelOrder>(s) + BYTE_MUL_RGB30(dst[x], 255 - qAlpha(s));
+            }
+            dst = (quint32 *)(((uchar *) dst) + dbpl);
+            src = (const quint32 *)(((const uchar *) src) + sbpl);
+        }
+    } else if (const_alpha != 0) {
+        const_alpha = (const_alpha * 255) >> 8;
+        for (int y=0; y<h; ++y) {
+            for (int x=0; x<w; ++x) {
+                uint s = BYTE_MUL(src[x], const_alpha);
+                dst[x] = qConvertArgb32ToA2rgb30<PixelOrder>(s) + BYTE_MUL_RGB30(dst[x], 255 - qAlpha(s));
+            }
+            dst = (quint32 *)(((uchar *) dst) + dbpl);
+            src = (const quint32 *)(((const uchar *) src) + sbpl);
+        }
+    }
+}
+
+template<QtPixelOrder PixelOrder>
+void qt_blend_rgb32_on_rgb30(uchar *destPixels, int dbpl,
+                             const uchar *srcPixels, int sbpl,
+                             int w, int h,
+                             int const_alpha)
+{
+#ifdef QT_DEBUG_DRAW
+    fprintf(stdout, "qt_blend_rgb32_on_rgb30: dst=(%p, %d), src=(%p, %d), dim=(%d, %d) alpha=%d\n",
+            destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+    fflush(stdout);
+#endif
+
+    if (const_alpha != 256) {
+        qt_blend_argb32pm_on_a2rgb30pm<PixelOrder>(destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+        return;
+    }
+
+    const uint *src = (const uint *) srcPixels;
+    uint *dst = (uint *) destPixels;
+    for (int y = 0; y < h; ++y) {
+        for (int x = 0; x < w; ++x) {
+            dst[x] = qConvertRgb32ToRgb30<PixelOrder>(src[x]);
+        }
+        dst = (quint32 *)(((uchar *) dst) + dbpl);
+        src = (const quint32 *)(((const uchar *) src) + sbpl);
+    }
+}
+
+static void qt_blend_a2rgb30pm_on_a2rgb30pm(uchar *destPixels, int dbpl,
+                                           const uchar *srcPixels, int sbpl,
+                                           int w, int h,
+                                           int const_alpha)
+{
+#ifdef QT_DEBUG_DRAW
+    fprintf(stdout, "qt_blend_a2rgb30pm_on_a2rgb30pm: dst=(%p, %d), src=(%p, %d), dim=(%d, %d) alpha=%d\n",
+            destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+    fflush(stdout);
+#endif
+
+    const uint *src = (const uint *) srcPixels;
+    uint *dst = (uint *) destPixels;
+    if (const_alpha == 256) {
+        for (int y=0; y<h; ++y) {
+            for (int x=0; x<w; ++x) {
+                uint s = src[x];
+                dst[x] = s + BYTE_MUL_RGB30(dst[x], 255 - qAlphaRgb30(s));
+            }
+            dst = (quint32 *)(((uchar *) dst) + dbpl);
+            src = (const quint32 *)(((const uchar *) src) + sbpl);
+        }
+    } else if (const_alpha != 0) {
+        const uint const_alpha255 = (const_alpha * 255) >> 8;
+        for (int y=0; y<h; ++y) {
+            for (int x=0; x<w; ++x) {
+                uint a = (qAlphaRgb30(src[x]) * const_alpha) >> 8;
+                uint s = BYTE_MUL_RGB30(src[x], const_alpha255);
+                dst[x] = s + BYTE_MUL_RGB30(dst[x], 255 - a);
+            }
+            dst = (quint32 *)(((uchar *) dst) + dbpl);
+            src = (const quint32 *)(((const uchar *) src) + sbpl);
+        }
+    }
+}
+
 
+void qt_blend_rgb30_on_rgb30(uchar *destPixels, int dbpl,
+                             const uchar *srcPixels, int sbpl,
+                             int w, int h,
+                             int const_alpha)
+{
+#ifdef QT_DEBUG_DRAW
+    fprintf(stdout, "qt_blend_rgb30_on_rgb30: dst=(%p, %d), src=(%p, %d), dim=(%d, %d) alpha=%d\n",
+            destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+    fflush(stdout);
+#endif
+
+    if (const_alpha != 256) {
+        qt_blend_a2rgb30pm_on_a2rgb30pm(destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+        return;
+    }
+
+    const uint *src = (const uint *) srcPixels;
+    uint *dst = (uint *) destPixels;
+    int len = w * 4;
+    for (int y=0; y<h; ++y) {
+        memcpy(dst, src, len);
+        dst = (quint32 *)(((uchar *) dst) + dbpl);
+        src = (const quint32 *)(((const uchar *) src) + sbpl);
+    }
+}
+
+static void qt_blend_a2bgr30pm_on_a2rgb30pm(uchar *destPixels, int dbpl,
+                                           const uchar *srcPixels, int sbpl,
+                                           int w, int h,
+                                           int const_alpha)
+{
+#ifdef QT_DEBUG_DRAW
+    fprintf(stdout, "qt_blend_a2bgr30pm_on_a2rgb32pm: dst=(%p, %d), src=(%p, %d), dim=(%d, %d) alpha=%d\n",
+            destPixels, dbpl, srcPixels, sbpl, w, h, const_alpha);
+    fflush(stdout);
+#endif
+
+    const uint *src = (const uint *) srcPixels;
+    uint *dst = (uint *) destPixels;
+    if (const_alpha == 256) {
+        for (int y=0; y<h; ++y) {
+            for (int x=0; x<w; ++x) {
+                uint s = qRgbSwapRgb30(src[x]);
+                dst[x] = s + BYTE_MUL_RGB30(dst[x], 255 - qAlphaRgb30(s));
+            }
+            dst = (quint32 *)(((uchar *) dst) + dbpl);
+            src = (const quint32 *)(((const uchar *) src) + sbpl);
+        }
+    } else if (const_alpha != 0) {
+        const uint const_alpha255 = (const_alpha * 255) >> 8;
+        for (int y=0; y<h; ++y) {
+            for (int x=0; x<w; ++x) {
+                uint a = (qAlphaRgb30(src[x]) * const_alpha) >> 8;
+                uint s = BYTE_MUL_RGB30(src[x], const_alpha255);
+                dst[x] = qRgbSwapRgb30(s) + BYTE_MUL_RGB30(dst[x], 255 - a);
+            }
+            dst = (quint32 *)(((uchar *) dst) + dbpl);
+            src = (const quint32 *)(((const uchar *) src) + sbpl);
+        }
+    }
+}
 
 struct Blend_RGB32_on_RGB32_NoAlpha {
     inline void write(quint32 *dst, quint32 src) { *dst = src; }
@@ -607,7 +760,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGRs30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_Mono
         0,      // Format_Invalid,
@@ -628,7 +785,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_MonoLSB
         0,      // Format_Invalid,
@@ -649,7 +810,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_Indexed8
         0,      // Format_Invalid,
@@ -670,7 +835,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB32
         0,      // Format_Invalid,
@@ -691,7 +860,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB32
         0,      // Format_Invalid,
@@ -712,7 +885,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB32_Premultiplied
         0,      // Format_Invalid,
@@ -733,7 +910,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB16
         0,      // Format_Invalid,
@@ -754,7 +935,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB8565_Premultiplied
         0,      // Format_Invalid,
@@ -775,7 +960,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB666
         0,      // Format_Invalid,
@@ -796,7 +985,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB6666_Premultiplied
         0,      // Format_Invalid,
@@ -817,7 +1010,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB555
         0,      // Format_Invalid,
@@ -838,7 +1035,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB8555_Premultiplied
         0,      // Format_Invalid,
@@ -859,7 +1060,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB888
         0,      // Format_Invalid,
@@ -880,7 +1085,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB444
         0,      // Format_Invalid,
@@ -901,7 +1110,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB4444_Premultiplied
         0,      // Format_Invalid,
@@ -922,7 +1135,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBX8888
         0,      // Format_Invalid,
@@ -948,8 +1165,12 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
 #else
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
 #endif
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBA8888
         0,      // Format_Invalid,
@@ -970,7 +1191,11 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBA8888_Premultiplied
         0,      // Format_Invalid,
@@ -996,9 +1221,113 @@ SrcOverScaleFunc qScaleFunctions[QImage::NImageFormats][QImage::NImageFormats] =
 #else
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
 #endif
-    }
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_BGR30
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_A2BGR30_Premultiplied
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_RGB30
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_A2RGB30_Premultiplied
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
 };
 
 
@@ -1022,7 +1351,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_Mono
         0,      // Format_Invalid,
@@ -1043,7 +1376,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_MonoLSB
         0,      // Format_Invalid,
@@ -1064,7 +1401,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_Indexed8
         0,      // Format_Invalid,
@@ -1085,7 +1426,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB32
         0,      // Format_Invalid,
@@ -1106,7 +1451,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB32
         0,      // Format_Invalid,
@@ -1127,7 +1476,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB32_Premultiplied
         0,      // Format_Invalid,
@@ -1148,7 +1501,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB16
         0,      // Format_Invalid,
@@ -1169,7 +1526,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB8565_Premultiplied
         0,      // Format_Invalid,
@@ -1190,7 +1551,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB666
         0,      // Format_Invalid,
@@ -1211,7 +1576,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB6666_Premultiplied
         0,      // Format_Invalid,
@@ -1232,7 +1601,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB555
         0,      // Format_Invalid,
@@ -1253,7 +1626,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB8555_Premultiplied
         0,      // Format_Invalid,
@@ -1274,7 +1651,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB888
         0,      // Format_Invalid,
@@ -1295,7 +1676,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB444
         0,      // Format_Invalid,
@@ -1316,7 +1701,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB4444_Premultiplied
         0,      // Format_Invalid,
@@ -1337,7 +1726,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBX8888
         0,      // Format_Invalid,
@@ -1363,8 +1756,12 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
 #else
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
 #endif
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBA8888
         0,      // Format_Invalid,
@@ -1385,7 +1782,11 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBA8888_Premultiplied
         0,      // Format_Invalid,
@@ -1411,9 +1812,113 @@ SrcOverBlendFunc qBlendFunctions[QImage::NImageFormats][QImage::NImageFormats] =
 #else
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
 #endif
-    }
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0,      // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_BGR30
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        qt_blend_rgb32_on_rgb30<PixelOrderBGR>,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        qt_blend_argb32pm_on_a2rgb30pm<PixelOrderBGR>,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        qt_blend_rgb30_on_rgb30,            // Format_RGB30,
+        qt_blend_a2rgb30pm_on_a2rgb30pm,    // Format_A2RGB30_Premultiplied,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,    // Format_RGB30,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,    // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_A2BGR30_Premultiplied
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        qt_blend_rgb32_on_rgb30<PixelOrderBGR>,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        qt_blend_argb32pm_on_a2rgb30pm<PixelOrderBGR>,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        qt_blend_rgb30_on_rgb30,            // Format_BGR30,
+        qt_blend_a2rgb30pm_on_a2rgb30pm,    // Format_A2BGR30_Premultiplied,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,    // Format_RGB30,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,    // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_RGB30
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        qt_blend_rgb32_on_rgb30<PixelOrderRGB>,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        qt_blend_argb32pm_on_a2rgb30pm<PixelOrderRGB>,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,    // Format_BGR30,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,    // Format_A2BGR30_Premultiplied,
+        qt_blend_rgb30_on_rgb30,            // Format_RGB30,
+        qt_blend_a2rgb30pm_on_a2rgb30pm,    // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_A2RGB30_Premultiplied
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        qt_blend_rgb32_on_rgb30<PixelOrderRGB>,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        qt_blend_argb32pm_on_a2rgb30pm<PixelOrderRGB>,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,      // Format_BGR30,
+        qt_blend_a2bgr30pm_on_a2rgb30pm,      // Format_A2BGR30_Premultiplied,
+        qt_blend_rgb30_on_rgb30,              // Format_RGB30,
+        qt_blend_a2rgb30pm_on_a2rgb30pm       // Format_A2RGB30_Premultiplied,
+    },
 };
 
 SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFormats] = {
@@ -1436,7 +1941,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_Mono
         0,      // Format_Invalid,
@@ -1457,7 +1966,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_MonoLSB
         0,      // Format_Invalid,
@@ -1478,7 +1991,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_Indexed8
         0,      // Format_Invalid,
@@ -1499,7 +2016,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB32
         0,      // Format_Invalid,
@@ -1520,7 +2041,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB32
         0,      // Format_Invalid,
@@ -1541,7 +2066,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB32_Premultiplied
         0,      // Format_Invalid,
@@ -1562,7 +2091,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB16
         0,      // Format_Invalid,
@@ -1583,7 +2116,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB8565_Premultiplied
         0,      // Format_Invalid,
@@ -1604,7 +2141,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB666
         0,      // Format_Invalid,
@@ -1625,7 +2166,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB6666_Premultiplied
         0,      // Format_Invalid,
@@ -1646,7 +2191,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB555
         0,      // Format_Invalid,
@@ -1667,7 +2216,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB8555_Premultiplied
         0,      // Format_Invalid,
@@ -1688,7 +2241,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB888
         0,      // Format_Invalid,
@@ -1709,7 +2266,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGB444
         0,      // Format_Invalid,
@@ -1730,7 +2291,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_ARGB4444_Premultiplied
         0,      // Format_Invalid,
@@ -1751,7 +2316,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBX8888
         0,      // Format_Invalid,
@@ -1777,8 +2346,12 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
 #else
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
 #endif
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBA8888
         0,      // Format_Invalid,
@@ -1799,7 +2372,11 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
         0,      // Format_ARGB4444_Premultiplied,
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
     },
     {   // Format_RGBA8888_Premultiplied
         0,      // Format_Invalid,
@@ -1825,9 +2402,113 @@ SrcOverTransformFunc qTransformFunctions[QImage::NImageFormats][QImage::NImageFo
 #else
         0,      // Format_RGBX8888,
         0,      // Format_RGBA8888,
-        0       // Format_RGBA8888_Premultiplied,
+        0,      // Format_RGBA8888_Premultiplied,
 #endif
-    }
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_BGR30
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_A2BGR30_Premultiplied
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_RGB30
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
+    {   // Format_A2RGB30_Premultiplied
+        0,      // Format_Invalid,
+        0,      // Format_Mono,
+        0,      // Format_MonoLSB,
+        0,      // Format_Indexed8,
+        0,      // Format_RGB32,
+        0,      // Format_ARGB32,
+        0,      // Format_ARGB32_Premultiplied,
+        0,      // Format_RGB16,
+        0,      // Format_ARGB8565_Premultiplied,
+        0,      // Format_RGB666,
+        0,      // Format_ARGB6666_Premultiplied,
+        0,      // Format_RGB555,
+        0,      // Format_ARGB8555_Premultiplied,
+        0,      // Format_RGB888,
+        0,      // Format_RGB444,
+        0,      // Format_ARGB4444_Premultiplied,
+        0,      // Format_RGBX8888,
+        0,      // Format_RGBA8888,
+        0,      // Format_RGBA8888_Premultiplied,
+        0,      // Format_BGR30,
+        0,      // Format_A2BGR30_Premultiplied,
+        0,      // Format_RGB30,
+        0       // Format_A2RGB30_Premultiplied,
+    },
 };
 
 QT_END_NAMESPACE
diff --git a/src/gui/painting/qblendfunctions_p.h b/src/gui/painting/qblendfunctions_p.h
index e08c74ab88..f81f2be9b4 100644
--- a/src/gui/painting/qblendfunctions_p.h
+++ b/src/gui/painting/qblendfunctions_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qblittable.cpp b/src/gui/painting/qblittable.cpp
index 456928b63d..a3451c0cd3 100644
--- a/src/gui/painting/qblittable.cpp
+++ b/src/gui/painting/qblittable.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qblittable_p.h b/src/gui/painting/qblittable_p.h
index 5c625f664e..45ee4b0fdc 100644
--- a/src/gui/painting/qblittable_p.h
+++ b/src/gui/painting/qblittable_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,6 +67,9 @@ public:
         SourceOverScaledPixmapCapability = 0x0008,
         AlphaFillRectCapability         = 0x0010,
         OpacityPixmapCapability         = 0x0020,
+        DrawScaledCachedGlyphsCapability = 0x0040,
+        SubPixelGlyphsCapability         = 0x0080,
+        ComplexClipCapability            = 0x0100,
 
         // Internal ones
         OutlineCapability               = 0x0001000
@@ -103,6 +98,17 @@ public:
         Q_UNUSED(opacity);
         qWarning("Please implement drawPixmapOpacity function in your platform or remove OpacityPixmapCapability from it");
     }
+    virtual bool drawCachedGlyphs(const QPaintEngineState *state, QFontEngine::GlyphFormat glyphFormat, int numGlyphs, const glyph_t *glyphs, const QFixedPoint *positions, QFontEngine *fontEngine) {
+        Q_UNUSED(state);
+        Q_UNUSED(glyphFormat);
+        Q_UNUSED(numGlyphs);
+        Q_UNUSED(glyphs);
+        Q_UNUSED(positions);
+        Q_UNUSED(fontEngine);
+        qWarning("Please implement drawCachedGlyphs function in your platform or remove DrawCachedGlyphsCapability from it");
+        return true;
+    }
+
 
     QImage *lock();
     void unlock();
diff --git a/src/gui/painting/qbrush.cpp b/src/gui/painting/qbrush.cpp
index b35fa38ce0..d120175108 100644
--- a/src/gui/painting/qbrush.cpp
+++ b/src/gui/painting/qbrush.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -604,8 +596,16 @@ void QBrush::detach(Qt::BrushStyle newStyle)
     case Qt::RadialGradientPattern:
     case Qt::ConicalGradientPattern:
         x.reset(new QGradientBrushData);
-        static_cast<QGradientBrushData *>(x.data())->gradient =
-            static_cast<QGradientBrushData *>(d.data())->gradient;
+        switch (d->style) {
+        case Qt::LinearGradientPattern:
+        case Qt::RadialGradientPattern:
+        case Qt::ConicalGradientPattern:
+            static_cast<QGradientBrushData *>(x.data())->gradient =
+                    static_cast<QGradientBrushData *>(d.data())->gradient;
+            break;
+        default:
+            break;
+        }
         break;
     default:
         x.reset(new QBrushData);
diff --git a/src/gui/painting/qbrush.h b/src/gui/painting/qbrush.h
index 4d8c97e255..ff652fe288 100644
--- a/src/gui/painting/qbrush.h
+++ b/src/gui/painting/qbrush.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qcolor.cpp b/src/gui/painting/qcolor.cpp
index b9d3ca888e..77fa989351 100644
--- a/src/gui/painting/qcolor.cpp
+++ b/src/gui/painting/qcolor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qcolor.h b/src/gui/painting/qcolor.h
index 1ede5a3682..b68504c865 100644
--- a/src/gui/painting/qcolor.h
+++ b/src/gui/painting/qcolor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -173,7 +165,7 @@ public:
     QColor toCmyk() const;
     QColor toHsl() const;
 
-    QColor convertTo(Spec colorSpec) const;
+    QColor convertTo(Spec colorSpec) const Q_REQUIRED_RESULT;
 
     static QColor fromRgb(QRgb rgb);
     static QColor fromRgba(QRgb rgba);
@@ -190,10 +182,10 @@ public:
     static QColor fromHsl(int h, int s, int l, int a = 255);
     static QColor fromHslF(qreal h, qreal s, qreal l, qreal a = 1.0);
 
-    QColor light(int f = 150) const;
-    QColor lighter(int f = 150) const;
-    QColor dark(int f = 200) const;
-    QColor darker(int f = 200) const;
+    QColor light(int f = 150) const Q_REQUIRED_RESULT;
+    QColor lighter(int f = 150) const Q_REQUIRED_RESULT;
+    QColor dark(int f = 200) const Q_REQUIRED_RESULT;
+    QColor darker(int f = 200) const Q_REQUIRED_RESULT;
 
     QColor &operator=(const QColor &);
     QColor &operator=(Qt::GlobalColor color);
diff --git a/src/gui/painting/qcolor_p.cpp b/src/gui/painting/qcolor_p.cpp
index 72b6279b2f..882d08f402 100644
--- a/src/gui/painting/qcolor_p.cpp
+++ b/src/gui/painting/qcolor_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -301,9 +293,8 @@ inline bool operator<(const RGBData &data, const char *name)
 
 static bool get_named_rgb(const char *name_no_space, QRgb *rgb)
 {
-    QByteArray name = QByteArray(name_no_space).toLower();
-    const RGBData *r = std::lower_bound(rgbTbl, rgbTbl + rgbTblSize, name.constData());
-    if ((r != rgbTbl + rgbTblSize) && !(name.constData() < *r)) {
+    const RGBData *r = std::lower_bound(rgbTbl, rgbTbl + rgbTblSize, name_no_space);
+    if ((r != rgbTbl + rgbTblSize) && !(name_no_space < *r)) {
         *rgb = r->value;
         return true;
     }
@@ -319,7 +310,7 @@ bool qt_get_named_rgb(const char *name, QRgb* rgb)
     int pos = 0;
     for(int i = 0; i < len; i++) {
         if(name[i] != '\t' && name[i] != ' ')
-            name_no_space[pos++] = name[i];
+            name_no_space[pos++] = QChar::toLower(name[i]);
     }
     name_no_space[pos] = 0;
 
@@ -334,7 +325,7 @@ bool qt_get_named_rgb(const QChar *name, int len, QRgb *rgb)
     int pos = 0;
     for(int i = 0; i < len; i++) {
         if(name[i] != QLatin1Char('\t') && name[i] != QLatin1Char(' '))
-            name_no_space[pos++] = name[i].toLatin1();
+            name_no_space[pos++] = name[i].toLower().toLatin1();
     }
     name_no_space[pos] = 0;
     return get_named_rgb(name_no_space, rgb);
@@ -352,6 +343,7 @@ QStringList qt_get_colornames()
 {
     int i = 0;
     QStringList lst;
+    lst.reserve(rgbTblSize);
     for (i = 0; i < rgbTblSize; i++)
         lst << QLatin1String(rgbTbl[i].name);
     return lst;
diff --git a/src/gui/painting/qcolor_p.h b/src/gui/painting/qcolor_p.h
index d70d1dea84..137a3f56e9 100644
--- a/src/gui/painting/qcolor_p.h
+++ b/src/gui/painting/qcolor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qcosmeticstroker.cpp b/src/gui/painting/qcosmeticstroker.cpp
index 926a1696b0..d179002127 100644
--- a/src/gui/painting/qcosmeticstroker.cpp
+++ b/src/gui/painting/qcosmeticstroker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qcosmeticstroker_p.h b/src/gui/painting/qcosmeticstroker_p.h
index 84e22b2653..d20b8a8e61 100644
--- a/src/gui/painting/qcosmeticstroker_p.h
+++ b/src/gui/painting/qcosmeticstroker_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qcssutil.cpp b/src/gui/painting/qcssutil.cpp
index 821fa1890d..dff258f138 100644
--- a/src/gui/painting/qcssutil.cpp
+++ b/src/gui/painting/qcssutil.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qcssutil_p.h b/src/gui/painting/qcssutil_p.h
index 7888b9edf1..a2db1d07e4 100644
--- a/src/gui/painting/qcssutil_p.h
+++ b/src/gui/painting/qcssutil_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdatabuffer_p.h b/src/gui/painting/qdatabuffer_p.h
index 45132fb853..c003a454e9 100644
--- a/src/gui/painting/qdatabuffer_p.h
+++ b/src/gui/painting/qdatabuffer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper.cpp b/src/gui/painting/qdrawhelper.cpp
index 9293fc32dc..f2d27a0e2a 100644
--- a/src/gui/painting/qdrawhelper.cpp
+++ b/src/gui/painting/qdrawhelper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -575,6 +567,42 @@ static const uint *QT_FASTCALL convertRGBXFromARGB32PM(uint *buffer, const uint
     return buffer;
 }
 
+template<QtPixelOrder PixelOrder>
+static const uint *QT_FASTCALL convertA2RGB30PMToARGB32PM(uint *buffer, const uint *src, int count,
+                                                          const QPixelLayout *, const QRgb *)
+{
+    for (int i = 0; i < count; ++i)
+        buffer[i] = qConvertA2rgb30ToArgb32<PixelOrder>(src[i]);
+    return buffer;
+}
+
+template<QtPixelOrder PixelOrder>
+static const uint *QT_FASTCALL convertA2RGB30PMFromARGB32PM(uint *buffer, const uint *src, int count,
+                                                            const QPixelLayout *, const QRgb *)
+{
+    for (int i = 0; i < count; ++i)
+        buffer[i] = qConvertArgb32ToA2rgb30<PixelOrder>(src[i]);
+    return buffer;
+}
+
+template<QtPixelOrder PixelOrder>
+static const uint *QT_FASTCALL convertRGB30FromRGB32(uint *buffer, const uint *src, int count,
+                                                     const QPixelLayout *, const QRgb *)
+{
+    for (int i = 0; i < count; ++i)
+        buffer[i] = qConvertRgb32ToRgb30<PixelOrder>(src[i]);
+    return buffer;
+}
+
+template<QtPixelOrder PixelOrder>
+static const uint *QT_FASTCALL convertRGB30FromARGB32PM(uint *buffer, const uint *src, int count,
+                                                        const QPixelLayout *, const QRgb *)
+{
+    for (int i = 0; i < count; ++i)
+        buffer[i] = qConvertRgb32ToRgb30<PixelOrder>(qUnpremultiply(src[i]));
+    return buffer;
+}
+
 template <QPixelLayout::BPP bpp> static
 uint QT_FASTCALL fetchPixel(const uchar *src, int index);
 
@@ -722,8 +750,12 @@ QPixelLayout qPixelLayouts[QImage::NImageFormats] = {
 #else
     { 8,  0, 8,  8, 8, 16, 0, 24, false, QPixelLayout::BPP32, convertRGBA8888PMToARGB32PM, convertRGBXFromARGB32PM, convertRGBXFromRGB32 }, // Format_RGBX8888
     { 8,  0, 8,  8, 8, 16, 8, 24, false, QPixelLayout::BPP32, convertRGBA8888ToARGB32PM, convertRGBA8888FromARGB32PM, 0 }, // Format_RGBA8888 (ABGR32)
-    { 8,  0, 8,  8, 8, 16, 8, 24,  true, QPixelLayout::BPP32, convertRGBA8888PMToARGB32PM, convertRGBA8888PMFromARGB32PM, 0 }  // Format_RGBA8888_Premultiplied
+    { 8,  0, 8,  8, 8, 16, 8, 24,  true, QPixelLayout::BPP32, convertRGBA8888PMToARGB32PM, convertRGBA8888PMFromARGB32PM, 0 },  // Format_RGBA8888_Premultiplied
 #endif
+    { 10,  20, 10,  10, 10, 0, 0, 30, false, QPixelLayout::BPP32, convertA2RGB30PMToARGB32PM<PixelOrderBGR>, convertRGB30FromARGB32PM<PixelOrderBGR>, convertRGB30FromRGB32<PixelOrderBGR> }, // Format_BGR30
+    { 10,  20, 10,  10, 10, 0, 2, 30,  true, QPixelLayout::BPP32, convertA2RGB30PMToARGB32PM<PixelOrderBGR>, convertA2RGB30PMFromARGB32PM<PixelOrderBGR>, 0 },  // Format_A2BGR30_Premultiplied
+    { 10,  0, 10,  10, 10, 20, 0, 30, false, QPixelLayout::BPP32, convertA2RGB30PMToARGB32PM<PixelOrderRGB>, convertRGB30FromARGB32PM<PixelOrderRGB>, convertRGB30FromRGB32<PixelOrderRGB> }, // Format_RGB30
+    { 10,  0, 10,  10, 10, 20, 2, 30,  true, QPixelLayout::BPP32, convertA2RGB30PMToARGB32PM<PixelOrderRGB>, convertA2RGB30PMFromARGB32PM<PixelOrderRGB>, 0 },  // Format_A2RGB30_Premultiplied
 };
 
 FetchPixelsFunc qFetchPixels[QPixelLayout::BPPCount] = {
@@ -831,6 +863,10 @@ static DestFetchProc destFetchProc[QImage::NImageFormats] =
     destFetch,          // Format_RGBX8888
     destFetch,          // Format_RGBA8888
     destFetch,          // Format_RGBA8888_Premultiplied
+    destFetch,          // Format_BGR30
+    destFetch,          // Format_A2BGR30_Premultiplied
+    destFetch,          // Format_RGB30
+    destFetch,          // Format_A2RGB30_Premultiplied
 };
 
 /*
@@ -970,7 +1006,11 @@ static DestStoreProc destStoreProc[QImage::NImageFormats] =
     destStore,          // Format_ARGB4444_Premultiplied
     destStore,          // Format_RGBX8888
     destStore,          // Format_RGBA8888
-    destStore           // Format_RGBA8888_Premultiplied
+    destStore,          // Format_RGBA8888_Premultiplied
+    destStore,          // Format_BGR30
+    destStore,          // Format_A2BGR30_Premultiplied
+    destStore,          // Format_RGB30
+    destStore,          // Format_A2RGB30_Premultiplied
 };
 
 /*
@@ -2221,7 +2261,11 @@ static SourceFetchProc sourceFetch[NBlendTypes][QImage::NImageFormats] = {
         fetchUntransformed,         // ARGB4444_Premultiplied
         fetchUntransformed,         // RGBX8888
         fetchUntransformed,         // RGBA8888
-        fetchUntransformed          // RGBA8888_Premultiplied
+        fetchUntransformed,         // RGBA8888_Premultiplied
+        fetchUntransformed,         // Format_BGR30
+        fetchUntransformed,         // Format_A2BGR30_Premultiplied
+        fetchUntransformed,         // Format_RGB30
+        fetchUntransformed,         // Format_A2RGB30_Premultiplied
     },
     // Tiled
     {
@@ -2243,7 +2287,11 @@ static SourceFetchProc sourceFetch[NBlendTypes][QImage::NImageFormats] = {
         fetchUntransformed,         // ARGB4444_Premultiplied
         fetchUntransformed,         // RGBX8888
         fetchUntransformed,         // RGBA8888
-        fetchUntransformed          // RGBA8888_Premultiplied
+        fetchUntransformed,         // RGBA8888_Premultiplied
+        fetchUntransformed,         // BGR30
+        fetchUntransformed,         // A2BGR30_Premultiplied
+        fetchUntransformed,         // RGB30
+        fetchUntransformed          // A2RGB30_Premultiplied
     },
     // Transformed
     {
@@ -2266,6 +2314,10 @@ static SourceFetchProc sourceFetch[NBlendTypes][QImage::NImageFormats] = {
         fetchTransformed<BlendTransformed>,         // RGBX8888
         fetchTransformed<BlendTransformed>,         // RGBA8888
         fetchTransformed<BlendTransformed>,         // RGBA8888_Premultiplied
+        fetchTransformed<BlendTransformed>,         // BGR30
+        fetchTransformed<BlendTransformed>,         // A2BGR30_Premultiplied
+        fetchTransformed<BlendTransformed>,         // RGB30
+        fetchTransformed<BlendTransformed>,         // A2RGB30_Premultiplied
     },
     {
         0, // TransformedTiled
@@ -2287,6 +2339,10 @@ static SourceFetchProc sourceFetch[NBlendTypes][QImage::NImageFormats] = {
         fetchTransformed<BlendTransformedTiled>,            // RGBX8888
         fetchTransformed<BlendTransformedTiled>,            // RGBA8888
         fetchTransformed<BlendTransformedTiled>,            // RGBA8888_Premultiplied
+        fetchTransformed<BlendTransformedTiled>,            // BGR30
+        fetchTransformed<BlendTransformedTiled>,            // A2BGR30_Premultiplied
+        fetchTransformed<BlendTransformedTiled>,            // RGB30
+        fetchTransformed<BlendTransformedTiled>,            // A2RGB30_Premultiplied
     },
     {
         0, // Bilinear
@@ -2307,7 +2363,11 @@ static SourceFetchProc sourceFetch[NBlendTypes][QImage::NImageFormats] = {
         fetchTransformedBilinear<BlendTransformedBilinear>,         // ARGB4444_Premultiplied
         fetchTransformedBilinear<BlendTransformedBilinear>,         // RGBX8888
         fetchTransformedBilinear<BlendTransformedBilinear>,         // RGBA8888
-        fetchTransformedBilinear<BlendTransformedBilinear>          // RGBA8888_Premultiplied
+        fetchTransformedBilinear<BlendTransformedBilinear>,         // RGBA8888_Premultiplied
+        fetchTransformedBilinear<BlendTransformedBilinear>,         // BGR30
+        fetchTransformedBilinear<BlendTransformedBilinear>,         // A2BGR30_Premultiplied
+        fetchTransformedBilinear<BlendTransformedBilinear>,         // RGB30
+        fetchTransformedBilinear<BlendTransformedBilinear>,         // A2RGB30_Premultiplied
     },
     {
         0, // BilinearTiled
@@ -2328,7 +2388,11 @@ static SourceFetchProc sourceFetch[NBlendTypes][QImage::NImageFormats] = {
         fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // ARGB4444_Premultiplied
         fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // RGBX8888
         fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // RGBA8888
-        fetchTransformedBilinear<BlendTransformedBilinearTiled>             // RGBA8888_Premultiplied
+        fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // RGBA8888_Premultiplied
+        fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // BGR30
+        fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // A2BGR30_Premultiplied
+        fetchTransformedBilinear<BlendTransformedBilinearTiled>,            // RGB30
+        fetchTransformedBilinear<BlendTransformedBilinearTiled>             // A2RGB30_Premultiplied
     },
 };
 
@@ -4263,7 +4327,6 @@ static CompositionFunctionSolid functionForModeSolid_C[] = {
         rasterop_solid_NotSource,
         rasterop_solid_NotSourceAndDestination,
         rasterop_solid_SourceAndNotDestination,
-        rasterop_solid_SourceAndNotDestination,
         rasterop_solid_NotSourceOrDestination,
         rasterop_solid_SourceOrNotDestination,
         rasterop_solid_ClearDestination,
@@ -4307,7 +4370,6 @@ static CompositionFunction functionForMode_C[] = {
         rasterop_NotSource,
         rasterop_NotSourceAndDestination,
         rasterop_SourceAndNotDestination,
-        rasterop_SourceAndNotDestination,
         rasterop_NotSourceOrDestination,
         rasterop_SourceOrNotDestination,
         rasterop_ClearDestination,
@@ -5749,6 +5811,10 @@ static const ProcessSpans processTextureSpans[NBlendTypes][QImage::NImageFormats
         blend_untransformed_generic,
         blend_untransformed_generic,
         blend_untransformed_generic,
+        blend_untransformed_generic,
+        blend_untransformed_generic,
+        blend_untransformed_generic,
+        blend_untransformed_generic,
     },
     // Tiled
     {
@@ -5771,6 +5837,10 @@ static const ProcessSpans processTextureSpans[NBlendTypes][QImage::NImageFormats
         blend_tiled_generic,
         blend_tiled_generic,
         blend_tiled_generic,
+        blend_tiled_generic,
+        blend_tiled_generic,
+        blend_tiled_generic,
+        blend_tiled_generic,
     },
     // Transformed
     {
@@ -5793,6 +5863,10 @@ static const ProcessSpans processTextureSpans[NBlendTypes][QImage::NImageFormats
         blend_src_generic,
         blend_src_generic,
         blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
     },
      // TransformedTiled
     {
@@ -5814,6 +5888,10 @@ static const ProcessSpans processTextureSpans[NBlendTypes][QImage::NImageFormats
         blend_src_generic,
         blend_src_generic,
         blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
         blend_src_generic
     },
     // Bilinear
@@ -5837,6 +5915,10 @@ static const ProcessSpans processTextureSpans[NBlendTypes][QImage::NImageFormats
         blend_src_generic,
         blend_src_generic,
         blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
+        blend_src_generic,
     },
     // BilinearTiled
     {
@@ -5859,6 +5941,10 @@ static const ProcessSpans processTextureSpans[NBlendTypes][QImage::NImageFormats
         blend_src_generic, // RGBX8888
         blend_src_generic, // RGBA8888
         blend_src_generic, // RGBA8888_Premultiplied
+        blend_src_generic, // BGR30
+        blend_src_generic, // A2BGR30_Premultiplied
+        blend_src_generic, // RGB30
+        blend_src_generic, // A2RGB30_Premultiplied
     }
 };
 
@@ -6379,7 +6465,6 @@ static void qt_rectfill_nonpremul_rgba(QRasterBuffer *rasterBuffer,
                          ARGB2RGBA(qUnpremultiply(color)), x, y, width, height, rasterBuffer->bytesPerLine());
 }
 
-
 // Map table for destination image format. Contains function pointers
 // for blends of various types unto the destination
 
@@ -6527,7 +6612,43 @@ DrawHelper qDrawHelper[QImage::NImageFormats] =
 #endif
         0,
         qt_rectfill_rgba
-    }
+    },
+    // Format_BGR30
+    {
+        blend_color_generic,
+        blend_src_generic,
+        0,
+        0,
+        0,
+        0
+    },
+    // Format_A2BGR30_Premultiplied
+    {
+        blend_color_generic,
+        blend_src_generic,
+        0,
+        0,
+        0,
+        0
+    },
+    // Format_RGB30
+    {
+        blend_color_generic,
+        blend_src_generic,
+        0,
+        0,
+        0,
+        0
+    },
+    // Format_A2RGB30_Premultiplied
+    {
+        blend_color_generic,
+        blend_src_generic,
+        0,
+        0,
+        0,
+        0
+    },
 };
 
 #if defined(Q_CC_MSVC) && !defined(_MIPS_)
@@ -6588,10 +6709,13 @@ void qt_memfill16(quint16 *dest, quint16 color, int count)
 }
 #endif
 #if !defined(__SSE2__) && !defined(__ARM_NEON__)
+#  ifdef QT_COMPILER_SUPPORTS_MIPS_DSP
+extern "C" void qt_memfill32_asm_mips_dsp(quint32 *, quint32, int);
+#  endif
+
 void qt_memfill32(quint32 *dest, quint32 color, int count)
 {
 #  ifdef QT_COMPILER_SUPPORTS_MIPS_DSP
-    extern "C" qt_memfill32_asm_mips_dsp(quint32 *, quint32, int);
     qt_memfill32_asm_mips_dsp(dest, color, count);
 #  else
     qt_memfill_template<quint32>(dest, color, count);
@@ -6667,14 +6791,6 @@ void qInitDrawhelperAsm()
     functionForModeSolidAsm = qt_functionForModeSolid_SSE2;
 #endif // SSE2
 
-#ifdef QT_COMPILER_SUPPORTS_IWMMXT
-    if (features & IWMMXT) {
-        functionForModeAsm = qt_functionForMode_IWMMXT;
-        functionForModeSolidAsm = qt_functionForModeSolid_IWMMXT;
-        qDrawHelper[QImage::Format_ARGB32_Premultiplied].blendColor = qt_blend_color_argb_iwmmxt;
-    }
-#endif // IWMMXT
-
 #if defined(__ARM_NEON__) && !defined(Q_OS_IOS)
     qBlendFunctions[QImage::Format_RGB32][QImage::Format_RGB32] = qt_blend_rgb32_on_rgb32_neon;
     qBlendFunctions[QImage::Format_ARGB32_Premultiplied][QImage::Format_RGB32] = qt_blend_rgb32_on_rgb32_neon;
@@ -6713,7 +6829,13 @@ void qInitDrawhelperAsm()
     qt_fetch_radial_gradient = qt_fetch_radial_gradient_neon;
 #endif
 
-#if defined(QT_COMPILER_SUPPORTS_MIPS_DSP)
+#ifdef Q_PROCESSOR_MIPS_32
+    qt_memfill32 = qt_memfill32_asm_mips_dsp;
+#endif // Q_PROCESSOR_MIPS_32
+
+#if defined(QT_COMPILER_SUPPORTS_MIPS_DSP) || defined(QT_COMPILER_SUPPORTS_MIPS_DSPR2)
+    if (features & (DSP | DSPR2)) {
+        // Composition functions are all DSP r1
         functionForMode_C[QPainter::CompositionMode_SourceOver] = comp_func_SourceOver_asm_mips_dsp;
         functionForMode_C[QPainter::CompositionMode_Source] = comp_func_Source_mips_dsp;
         functionForMode_C[QPainter::CompositionMode_DestinationOver] = comp_func_DestinationOver_mips_dsp;
@@ -6757,8 +6879,9 @@ void qInitDrawhelperAsm()
 #else
         qBlendFunctions[QImage::Format_RGB16][QImage::Format_RGB16] = qt_blend_rgb16_on_rgb16_mips_dsp;
 #endif // QT_COMPILER_SUPPORTS_MIPS_DSPR2
+    }
+#endif // QT_COMPILER_SUPPORTS_MIPS_DSP || QT_COMPILER_SUPPORTS_MIPS_DSPR2
 
-#endif // QT_COMPILER_SUPPORTS_MIPS_DSP
     if (functionForModeSolidAsm) {
         const int destinationMode = QPainter::CompositionMode_Destination;
         functionForModeSolidAsm[destinationMode] = functionForModeSolid_C[destinationMode];
diff --git a/src/gui/painting/qdrawhelper_iwmmxt.cpp b/src/gui/painting/qdrawhelper_iwmmxt.cpp
deleted file mode 100644
index 7b734fdfc6..0000000000
--- a/src/gui/painting/qdrawhelper_iwmmxt.cpp
+++ /dev/null
@@ -1,158 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifdef QT_COMPILER_SUPPORTS_IWMMXT
-
-#include <mmintrin.h>
-#if defined(Q_OS_WINCE)
-#  include "qplatformdefs.h"
-#endif
-#if !defined(__IWMMXT__) && !defined(Q_OS_WINCE)
-#  include <xmmintrin.h>
-#elif defined(Q_OS_WINCE_STD) && defined(_X86_)
-#  pragma warning(disable: 4391)
-#  include <xmmintrin.h>
-#endif
-
-#include <private/qdrawhelper_sse_p.h>
-
-QT_BEGIN_NAMESPACE
-
-#ifndef _MM_SHUFFLE
-#define _MM_SHUFFLE(fp3,fp2,fp1,fp0) \
- (((fp3) << 6) | ((fp2) << 4) | ((fp1) << 2) | (fp0))
-#endif
-
-struct QIWMMXTIntrinsics : public QMMXCommonIntrinsics
-{
-    static inline m64 alpha(m64 x) {
-        return _mm_shuffle_pi16 (x, _MM_SHUFFLE(3, 3, 3, 3));
-    }
-
-    static inline m64 _load_alpha(uint x, const m64 &mmx_0x0000) {
-        m64 t = _mm_unpacklo_pi8(_mm_cvtsi32_si64(x), mmx_0x0000);
-        return _mm_shuffle_pi16(t, _MM_SHUFFLE(0, 0, 0, 0));
-    }
-
-    static inline void end() {
-    }
-};
-
-CompositionFunctionSolid qt_functionForModeSolid_IWMMXT[numCompositionFunctions] = {
-    comp_func_solid_SourceOver<QIWMMXTIntrinsics>,
-    comp_func_solid_DestinationOver<QIWMMXTIntrinsics>,
-    comp_func_solid_Clear<QIWMMXTIntrinsics>,
-    comp_func_solid_Source<QIWMMXTIntrinsics>,
-    0,
-    comp_func_solid_SourceIn<QIWMMXTIntrinsics>,
-    comp_func_solid_DestinationIn<QIWMMXTIntrinsics>,
-    comp_func_solid_SourceOut<QIWMMXTIntrinsics>,
-    comp_func_solid_DestinationOut<QIWMMXTIntrinsics>,
-    comp_func_solid_SourceAtop<QIWMMXTIntrinsics>,
-    comp_func_solid_DestinationAtop<QIWMMXTIntrinsics>,
-    comp_func_solid_XOR<QIWMMXTIntrinsics>,
-    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // svg 1.2 modes
-    rasterop_solid_SourceOrDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_SourceAndDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_SourceXorDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_NotSourceAndNotDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_NotSourceOrNotDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_NotSourceXorDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_NotSource<QIWMMXTIntrinsics>,
-    rasterop_solid_NotSourceAndDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_SourceAndNotDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_NotSourceOrDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_SourceOrNotDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_ClearDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_SetDestination<QIWMMXTIntrinsics>,
-    rasterop_solid_NotDestination<QIWMMXTIntrinsics>
-};
-
-CompositionFunction qt_functionForMode_IWMMXT[] = {
-    comp_func_SourceOver<QIWMMXTIntrinsics>,
-    comp_func_DestinationOver<QIWMMXTIntrinsics>,
-    comp_func_Clear<QIWMMXTIntrinsics>,
-    comp_func_Source<QIWMMXTIntrinsics>,
-    comp_func_Destination,
-    comp_func_SourceIn<QIWMMXTIntrinsics>,
-    comp_func_DestinationIn<QIWMMXTIntrinsics>,
-    comp_func_SourceOut<QIWMMXTIntrinsics>,
-    comp_func_DestinationOut<QIWMMXTIntrinsics>,
-    comp_func_SourceAtop<QIWMMXTIntrinsics>,
-    comp_func_DestinationAtop<QIWMMXTIntrinsics>,
-    comp_func_XOR<QIWMMXTIntrinsics>,
-    comp_func_Plus,
-    comp_func_Multiply,
-    comp_func_Screen,
-    comp_func_Overlay,
-    comp_func_Darken,
-    comp_func_Lighten,
-    comp_func_ColorDodge,
-    comp_func_ColorBurn,
-    comp_func_HardLight,
-    comp_func_SoftLight,
-    comp_func_Difference,
-    comp_func_Exclusion,
-    rasterop_SourceOrDestination,
-    rasterop_SourceAndDestination,
-    rasterop_SourceXorDestination,
-    rasterop_NotSourceAndNotDestination,
-    rasterop_NotSourceOrNotDestination,
-    rasterop_NotSourceXorDestination,
-    rasterop_NotSource,
-    rasterop_NotSourceAndDestination,
-    rasterop_SourceAndNotDestination,
-    rasterop_NotSourceOrDestination,
-    rasterop_SourceOrNotDestination,
-    rasterop_ClearDestination,
-    rasterop_SetDestination,
-    rasterop_NotDestination
-};
-
-void qt_blend_color_argb_iwmmxt(int count, const QSpan *spans, void *userData)
-{
-    qt_blend_color_argb_x86<QIWMMXTIntrinsics>(count, spans, userData,
-                                               (CompositionFunctionSolid*)qt_functionForModeSolid_IWMMXT);
-}
-
-#endif // QT_COMPILER_SUPPORTS_IWMMXT
-
-QT_END_NAMESPACE
diff --git a/src/gui/painting/qdrawhelper_mips_dsp.cpp b/src/gui/painting/qdrawhelper_mips_dsp.cpp
index 2202b78ce8..764e7763a8 100644
--- a/src/gui/painting/qdrawhelper_mips_dsp.cpp
+++ b/src/gui/painting/qdrawhelper_mips_dsp.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_mips_dsp_p.h b/src/gui/painting/qdrawhelper_mips_dsp_p.h
index 3dceb7793d..e33ce28ca0 100644
--- a/src/gui/painting/qdrawhelper_mips_dsp_p.h
+++ b/src/gui/painting/qdrawhelper_mips_dsp_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_neon.cpp b/src/gui/painting/qdrawhelper_neon.cpp
index 3ac92122bb..2f1452f430 100644
--- a/src/gui/painting/qdrawhelper_neon.cpp
+++ b/src/gui/painting/qdrawhelper_neon.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_neon_p.h b/src/gui/painting/qdrawhelper_neon_p.h
index 2313664846..4dfd37da71 100644
--- a/src/gui/painting/qdrawhelper_neon_p.h
+++ b/src/gui/painting/qdrawhelper_neon_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_p.h b/src/gui/painting/qdrawhelper_p.h
index 1c05fc305a..695fbbdbbd 100644
--- a/src/gui/painting/qdrawhelper_p.h
+++ b/src/gui/painting/qdrawhelper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -672,6 +664,36 @@ static Q_ALWAYS_INLINE uint BYTE_MUL_RGB16_32(uint x, uint a) {
     return t;
 }
 
+#if defined(Q_CC_RVCT)
+#  pragma push
+#  pragma arm
+#endif
+static Q_ALWAYS_INLINE int qt_div_255(int x) { return (x + (x>>8) + 0x80) >> 8; }
+#if defined(Q_CC_RVCT)
+#  pragma pop
+#endif
+
+static Q_ALWAYS_INLINE uint BYTE_MUL_RGB30(uint x, uint a) {
+    uint xa = x >> 30;
+    uint xr = (x >> 20) & 0x3ff;
+    uint xg = (x >> 10) & 0x3ff;
+    uint xb = x & 0x3ff;
+    xa = qt_div_255(xa * a);
+    xr = qt_div_255(xr * a);
+    xg = qt_div_255(xg * a);
+    xb = qt_div_255(xb * a);
+    return (xa << 30) | (xr << 20) | (xg << 10) | xb;
+}
+
+static Q_ALWAYS_INLINE uint qAlphaRgb30(uint c)
+{
+    uint a = c >> 30;
+    a |= a << 2;
+    a |= a << 4;
+    return a;
+}
+
+
 // FIXME: Remove when all Qt modules have stopped using PREMUL and INV_PREMUL
 #define PREMUL(x) qPremultiply(x)
 #define INV_PREMUL(p) qUnpremultiply(p)
@@ -795,15 +817,6 @@ do {                                          \
     }                                         \
 } while (0)
 
-#if defined(Q_CC_RVCT)
-#  pragma push
-#  pragma arm
-#endif
-static Q_ALWAYS_INLINE int qt_div_255(int x) { return (x + (x>>8) + 0x80) >> 8; }
-#if defined(Q_CC_RVCT)
-#  pragma pop
-#endif
-
 inline ushort qConvertRgb32To16(uint c)
 {
    return (((c) >> 3) & 0x001f)
@@ -819,6 +832,84 @@ inline QRgb qConvertRgb16To32(uint c)
         | ((((c) << 8) & 0xf80000) | (((c) << 3) & 0x70000));
 }
 
+enum QtPixelOrder {
+    PixelOrderRGB,
+    PixelOrderBGR
+};
+
+template<enum QtPixelOrder> inline uint qConvertArgb32ToA2rgb30(QRgb);
+
+template<enum QtPixelOrder> inline uint qConvertRgb32ToRgb30(QRgb);
+
+template<enum QtPixelOrder> inline QRgb qConvertA2rgb30ToArgb32(uint c);
+
+template<>
+inline uint qConvertArgb32ToA2rgb30<PixelOrderBGR>(QRgb c)
+{
+    return (c & 0xc0000000)
+        | (((c << 22) & 0x3fc00000) | ((c << 14) & 0x00300000))
+        | (((c << 4) & 0x000ff000) | ((c >> 4) & 0x00000c00))
+        | (((c >> 14) & 0x000003fc) | ((c >> 22) & 0x00000003));
+}
+
+template<>
+inline uint qConvertArgb32ToA2rgb30<PixelOrderRGB>(QRgb c)
+{
+    return (c & 0xc0000000)
+        | (((c << 6) & 0x3fc00000) | ((c >> 2) & 0x00300000))
+        | (((c << 4) & 0x000ff000) | ((c >> 4) & 0x00000c00))
+        | (((c << 2) & 0x000003fc) | ((c >> 6) & 0x00000003));
+}
+
+template<>
+inline uint qConvertRgb32ToRgb30<PixelOrderBGR>(QRgb c)
+{
+    return 0xc0000000
+        | (((c << 22) & 0x3fc00000) | ((c << 14) & 0x00300000))
+        | (((c << 4) & 0x000ff000) | ((c >> 4) & 0x00000c00))
+        | (((c >> 14) & 0x000003fc) | ((c >> 22) & 0x00000003));
+}
+
+template<>
+inline uint qConvertRgb32ToRgb30<PixelOrderRGB>(QRgb c)
+{
+    return 0xc0000000
+        | (((c << 6) & 0x3fc00000) | ((c >> 2) & 0x00300000))
+        | (((c << 4) & 0x000ff000) | ((c >> 4) & 0x00000c00))
+        | (((c << 2) & 0x000003fc) | ((c >> 6) & 0x00000003));
+}
+
+template<>
+inline QRgb qConvertA2rgb30ToArgb32<PixelOrderBGR>(uint c)
+{
+    uint a = c >> 30;
+    a |= a << 2;
+    a |= a << 4;
+    return (a << 24)
+        | ((c << 14) & 0x00ff0000)
+        | ((c >> 4) & 0x0000ff00)
+        | ((c >> 22) & 0x000000ff);
+}
+
+template<>
+inline QRgb qConvertA2rgb30ToArgb32<PixelOrderRGB>(uint c)
+{
+    uint a = c >> 30;
+    a |= a << 2;
+    a |= a << 4;
+    return (a << 24)
+        | ((c >> 6) & 0x00ff0000)
+        | ((c >> 4) & 0x0000ff00)
+        | ((c >> 2) & 0x000000ff);
+}
+
+inline uint qRgbSwapRgb30(uint c)
+{
+    const uint ag = c & 0xc00ffc00;
+    const uint rb = c & 0x3ff003ff;
+    return ag | (rb << 20) | (rb >> 20);
+}
+
 inline int qRed565(quint16 rgb) {
     const int r = (rgb & 0xf800);
     return (r >> 8) | (r >> 13);
diff --git a/src/gui/painting/qdrawhelper_sse2.cpp b/src/gui/painting/qdrawhelper_sse2.cpp
index d02871c86d..77889b3c35 100644
--- a/src/gui/painting/qdrawhelper_sse2.cpp
+++ b/src/gui/painting/qdrawhelper_sse2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_sse_p.h b/src/gui/painting/qdrawhelper_sse_p.h
index 6c3ff64e07..a1f878b5c0 100644
--- a/src/gui/painting/qdrawhelper_sse_p.h
+++ b/src/gui/painting/qdrawhelper_sse_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_ssse3.cpp b/src/gui/painting/qdrawhelper_ssse3.cpp
index 59882f3ae3..b403e189f7 100644
--- a/src/gui/painting/qdrawhelper_ssse3.cpp
+++ b/src/gui/painting/qdrawhelper_ssse3.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qdrawhelper_x86_p.h b/src/gui/painting/qdrawhelper_x86_p.h
index 97c1f87c2a..4dd5692a00 100644
--- a/src/gui/painting/qdrawhelper_x86_p.h
+++ b/src/gui/painting/qdrawhelper_x86_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -82,13 +74,6 @@ extern CompositionFunction qt_functionForMode_SSE2[];
 extern CompositionFunctionSolid qt_functionForModeSolid_SSE2[];
 #endif // __SSE2__
 
-#ifdef QT_COMPILER_SUPPORTS_IWMMXT
-void qt_blend_color_argb_iwmmxt(int count, const QSpan *spans, void *userData);
-
-extern CompositionFunction qt_functionForMode_IWMMXT[];
-extern CompositionFunctionSolid qt_functionForModeSolid_IWMMXT[];
-#endif
-
 static const int numCompositionFunctions = 38;
 
 QT_END_NAMESPACE
diff --git a/src/gui/painting/qdrawingprimitive_sse2_p.h b/src/gui/painting/qdrawingprimitive_sse2_p.h
index cdf68b932d..2b4cdc286e 100644
--- a/src/gui/painting/qdrawingprimitive_sse2_p.h
+++ b/src/gui/painting/qdrawingprimitive_sse2_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qemulationpaintengine.cpp b/src/gui/painting/qemulationpaintengine.cpp
index 0fb907b6c5..9e8e36dd9d 100644
--- a/src/gui/painting/qemulationpaintengine.cpp
+++ b/src/gui/painting/qemulationpaintengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qemulationpaintengine_p.h b/src/gui/painting/qemulationpaintengine_p.h
index db2d51e53a..b4481a067c 100644
--- a/src/gui/painting/qemulationpaintengine_p.h
+++ b/src/gui/painting/qemulationpaintengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qfixed_p.h b/src/gui/painting/qfixed_p.h
index b51cd75ac7..69a7b06780 100644
--- a/src/gui/painting/qfixed_p.h
+++ b/src/gui/painting/qfixed_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qgammatables.cpp b/src/gui/painting/qgammatables.cpp
index f8c650177b..76c1c84631 100644
--- a/src/gui/painting/qgammatables.cpp
+++ b/src/gui/painting/qgammatables.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qgrayraster.c b/src/gui/painting/qgrayraster.c
index 7dfb743ae2..614d95ace1 100644
--- a/src/gui/painting/qgrayraster.c
+++ b/src/gui/painting/qgrayraster.c
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qgrayraster_p.h b/src/gui/painting/qgrayraster_p.h
index 417dc77261..9a2ef3a413 100644
--- a/src/gui/painting/qgrayraster_p.h
+++ b/src/gui/painting/qgrayraster_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qimagescale.cpp b/src/gui/painting/qimagescale.cpp
index 89ccdd42f0..4934a18747 100644
--- a/src/gui/painting/qimagescale.cpp
+++ b/src/gui/painting/qimagescale.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -151,8 +143,8 @@ unsigned int** QImageScale::qimageCalcYPoints(unsigned int *src,
                                               int sw, int sh, int dh)
 {
     unsigned int **p;
-    int i, j = 0;
-    int val, inc, rv = 0;
+    int i, j = 0, rv = 0;
+    qint64 val, inc;
 
     if(dh < 0){
         dh = -dh;
@@ -162,9 +154,9 @@ unsigned int** QImageScale::qimageCalcYPoints(unsigned int *src,
 
     int up = qAbs(dh) >= sh;
     val = up ? 0x8000 * sh / dh - 0x8000 : 0;
-    inc = (sh << 16) / dh;
+    inc = (((qint64)sh) << 16) / dh;
     for(i = 0; i < dh; i++){
-        p[j++] = src + qMax(0, val >> 16) * sw;
+        p[j++] = src + qMax(0LL, val >> 16) * sw;
         val += inc;
     }
     if(rv){
@@ -179,8 +171,8 @@ unsigned int** QImageScale::qimageCalcYPoints(unsigned int *src,
 
 int* QImageScale::qimageCalcXPoints(int sw, int dw)
 {
-    int *p, i, j = 0;
-    int val, inc, rv = 0;
+    int *p, i, j = 0, rv = 0;
+    qint64 val, inc;
 
     if(dw < 0){
         dw = -dw;
@@ -190,9 +182,9 @@ int* QImageScale::qimageCalcXPoints(int sw, int dw)
 
     int up = qAbs(dw) >= sw;
     val = up ? 0x8000 * sw / dw - 0x8000 : 0;
-    inc = (sw << 16) / dw;
+    inc = (((qint64)sw) << 16) / dw;
     for(i = 0; i < dw; i++){
-        p[j++] = qMax(0, val >> 16);
+        p[j++] = qMax(0LL, val >> 16);
         val += inc;
     }
 
@@ -218,10 +210,10 @@ int* QImageScale::qimageCalcApoints(int s, int d, int up)
 
     /* scaling up */
     if(up){
-        int val, inc;
+        qint64 val, inc;
 
         val = 0x8000 * s / d - 0x8000;
-        inc = (s << 16) / d;
+        inc = (((qint64)s) << 16) / d;
         for(i = 0; i < d; i++){
             int pos = val >> 16;
             if (pos < 0)
@@ -235,9 +227,10 @@ int* QImageScale::qimageCalcApoints(int s, int d, int up)
     }
     /* scaling down */
     else{
-        int val, inc, ap, Cp;
+        qint64 val, inc;
+        int ap, Cp;
         val = 0;
-        inc = (s << 16) / d;
+        inc = (((qint64)s) << 16) / d;
         Cp = ((d << 14) / s) + 1;
         for(i = 0; i < d; i++){
             ap = ((0x100 - ((val >> 8) & 0xff)) * Cp) >> 8;
diff --git a/src/gui/painting/qimagescale_p.h b/src/gui/painting/qimagescale_p.h
index 594d2dd271..61767dd905 100644
--- a/src/gui/painting/qimagescale_p.h
+++ b/src/gui/painting/qimagescale_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qmath_p.h b/src/gui/painting/qmath_p.h
index 90920f4cfc..fedcb3bd3e 100644
--- a/src/gui/painting/qmath_p.h
+++ b/src/gui/painting/qmath_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qmatrix.cpp b/src/gui/painting/qmatrix.cpp
index c44c89c8ee..9a59408e52 100644
--- a/src/gui/painting/qmatrix.cpp
+++ b/src/gui/painting/qmatrix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qmatrix.h b/src/gui/painting/qmatrix.h
index d2c1ae3a3c..f09c5cbec4 100644
--- a/src/gui/painting/qmatrix.h
+++ b/src/gui/painting/qmatrix.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -100,7 +92,7 @@ public:
     bool isInvertible() const { return !qFuzzyIsNull(_m11*_m22 - _m12*_m21); }
     qreal determinant() const { return _m11*_m22 - _m12*_m21; }
 
-    QMatrix inverted(bool *invertible = 0) const;
+    QMatrix inverted(bool *invertible = 0) const Q_REQUIRED_RESULT;
 
     bool operator==(const QMatrix &) const;
     bool operator!=(const QMatrix &) const;
diff --git a/src/gui/painting/qmemrotate.cpp b/src/gui/painting/qmemrotate.cpp
index 087231df43..b55f3b0dcc 100644
--- a/src/gui/painting/qmemrotate.cpp
+++ b/src/gui/painting/qmemrotate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -532,7 +524,11 @@ MemRotateFunc qMemRotateFunctions[QImage::NImageFormats][3] =
     { 0, 0, 0 },      // Format_ARGB4444_Premultiplied,
     { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_RGBX8888,
     { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_RGBA8888,
-    { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 }       // Format_RGBA8888_Premultiplied,
+    { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_RGBA8888_Premultiplied,
+    { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_BGB30,
+    { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_A2BGR30_Premultiplied,
+    { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_RGB30,
+    { qt_memrotate90_32, qt_memrotate180_32, qt_memrotate270_32 },      // Format_A2RGB30_Premultiplied,
 };
 
 QT_END_NAMESPACE
diff --git a/src/gui/painting/qmemrotate_p.h b/src/gui/painting/qmemrotate_p.h
index ef14d48521..24b23da57d 100644
--- a/src/gui/painting/qmemrotate_p.h
+++ b/src/gui/painting/qmemrotate_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qoutlinemapper.cpp b/src/gui/painting/qoutlinemapper.cpp
index 6a38ed6c70..358f8c2b19 100644
--- a/src/gui/painting/qoutlinemapper.cpp
+++ b/src/gui/painting/qoutlinemapper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qoutlinemapper_p.h b/src/gui/painting/qoutlinemapper_p.h
index bdc1fb5222..4e3a4bfb9a 100644
--- a/src/gui/painting/qoutlinemapper_p.h
+++ b/src/gui/painting/qoutlinemapper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagedpaintdevice.cpp b/src/gui/painting/qpagedpaintdevice.cpp
index e102b7fae3..fb3e860a7d 100644
--- a/src/gui/painting/qpagedpaintdevice.cpp
+++ b/src/gui/painting/qpagedpaintdevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagedpaintdevice.h b/src/gui/painting/qpagedpaintdevice.h
index dec56f9ce8..10d18c4ae2 100644
--- a/src/gui/painting/qpagedpaintdevice.h
+++ b/src/gui/painting/qpagedpaintdevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagedpaintdevice_p.h b/src/gui/painting/qpagedpaintdevice_p.h
index 2321494779..a17f1606ae 100644
--- a/src/gui/painting/qpagedpaintdevice_p.h
+++ b/src/gui/painting/qpagedpaintdevice_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagelayout.cpp b/src/gui/painting/qpagelayout.cpp
index 15d98828bf..c0f63795e4 100644
--- a/src/gui/painting/qpagelayout.cpp
+++ b/src/gui/painting/qpagelayout.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagelayout.h b/src/gui/painting/qpagelayout.h
index e63f6f4d39..252e65bc23 100644
--- a/src/gui/painting/qpagelayout.h
+++ b/src/gui/painting/qpagelayout.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagesize.cpp b/src/gui/painting/qpagesize.cpp
index 978aef905a..faf3e3941e 100644
--- a/src/gui/painting/qpagesize.cpp
+++ b/src/gui/painting/qpagesize.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpagesize.h b/src/gui/painting/qpagesize.h
index ae337a2438..d12c51513f 100644
--- a/src/gui/painting/qpagesize.h
+++ b/src/gui/painting/qpagesize.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintbuffer.cpp b/src/gui/painting/qpaintbuffer.cpp
index 421d706230..a9a2c91fd6 100644
--- a/src/gui/painting/qpaintbuffer.cpp
+++ b/src/gui/painting/qpaintbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1242,6 +1234,11 @@ void QPaintBufferEngine::drawTiledPixmap(const QRectF &r, const QPixmap &pm, con
 
 void QPaintBufferEngine::drawStaticTextItem(QStaticTextItem *staticTextItem)
 {
+    if (staticTextItem->usesRawFont) {
+        QPaintEngineEx::drawStaticTextItem(staticTextItem);  // Draw as path
+        return;
+    }
+
     QVariantList variants;
 
     variants << QVariant(staticTextItem->font);
diff --git a/src/gui/painting/qpaintbuffer_p.h b/src/gui/painting/qpaintbuffer_p.h
index 7cd49c799d..27add76a98 100644
--- a/src/gui/painting/qpaintbuffer_p.h
+++ b/src/gui/painting/qpaintbuffer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintdevice.cpp b/src/gui/painting/qpaintdevice.cpp
index 81d2063039..a4daa9841a 100644
--- a/src/gui/painting/qpaintdevice.cpp
+++ b/src/gui/painting/qpaintdevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintdevice.h b/src/gui/painting/qpaintdevice.h
index bb66f32b7f..bec89dc379 100644
--- a/src/gui/painting/qpaintdevice.h
+++ b/src/gui/painting/qpaintdevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintengine.cpp b/src/gui/painting/qpaintengine.cpp
index ba20186d00..4e705648f1 100644
--- a/src/gui/painting/qpaintengine.cpp
+++ b/src/gui/painting/qpaintengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintengine.h b/src/gui/painting/qpaintengine.h
index 7b928ba5f6..b56e4eb48c 100644
--- a/src/gui/painting/qpaintengine.h
+++ b/src/gui/painting/qpaintengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -250,7 +242,7 @@ private:
     friend class QFontEngineWin;
     friend class QMacPrintEngine;
     friend class QMacPrintEnginePrivate;
-    friend class QFontEngineQPA;
+    friend class QFontEngineQPF2;
     friend class QPainter;
     friend class QPainterPrivate;
     friend class QWidget;
diff --git a/src/gui/painting/qpaintengine_blitter.cpp b/src/gui/painting/qpaintengine_blitter.cpp
index 67a692e2db..c5e85cc7c7 100644
--- a/src/gui/painting/qpaintengine_blitter.cpp
+++ b/src/gui/painting/qpaintengine_blitter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -132,6 +124,19 @@ public:
         return checkStateAgainstMask(capabillitiesState, opacityPixmapMask);
     }
 
+    bool canBlitterDrawCachedGlyphs(const QTransform &transform, QFontEngine::GlyphFormat requestedGlyphFormat, bool complexClip) const
+    {
+        if (transform.type() > QTransform::TxScale)
+            return false;
+        if (!(m_capabilities & QBlittable::DrawScaledCachedGlyphsCapability))
+            return false;
+        if (requestedGlyphFormat == QFontEngine::Format_ARGB && !(m_capabilities & QBlittable::SubPixelGlyphsCapability))
+            return false;
+        if (complexClip && !(m_capabilities & QBlittable::ComplexClipCapability))
+            return false;
+        return true;
+    }
+
     inline void updateState(uint mask, bool on) {
         updateStateBits(&capabillitiesState, mask, on);
     }
@@ -798,6 +803,28 @@ void QBlitterPaintEngine::drawStaticTextItem(QStaticTextItem *sti)
 #endif
 }
 
+bool QBlitterPaintEngine::drawCachedGlyphs(int numGlyphs, const glyph_t *glyphs, const QFixedPoint *positions, QFontEngine *fontEngine)
+{
+    Q_D(QBlitterPaintEngine);
+    QFontEngine::GlyphFormat glyphFormat = d->glyphCacheFormat;
+    if (fontEngine->glyphFormat != QFontEngine::Format_None)
+        glyphFormat = fontEngine->glyphFormat;
+
+    const QClipData *clipData = d->clip();
+    const bool complexClip = clipData && !clipData->hasRectClip;
+
+    const QPainterState *s = state();
+    if (d->caps.canBlitterDrawCachedGlyphs(s->transform(), glyphFormat, complexClip)) {
+        d->unlock();
+        const bool result = d->pmData->blittable()->drawCachedGlyphs(s, glyphFormat, numGlyphs, glyphs, positions, fontEngine);
+        // Lock again as the raster paint engine might draw decorations now.
+        d->lock();
+        return result;
+    } else {
+        return QRasterPaintEngine::drawCachedGlyphs(numGlyphs, glyphs, positions, fontEngine);
+    }
+}
+
 QT_END_NAMESPACE
 #endif //QT_NO_BLITTABLE
 
diff --git a/src/gui/painting/qpaintengine_blitter_p.h b/src/gui/painting/qpaintengine_blitter_p.h
index d917a30f1f..e28c5b9b16 100644
--- a/src/gui/painting/qpaintengine_blitter_p.h
+++ b/src/gui/painting/qpaintengine_blitter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -107,6 +99,7 @@ public:
     void drawPoints(const QPoint *points, int pointCount);
     void stroke(const QVectorPath &path, const QPen &pen);
     void drawStaticTextItem(QStaticTextItem *);
+    bool drawCachedGlyphs(int numGlyphs, const glyph_t *glyphs, const QFixedPoint *positions, QFontEngine *fontEngine);
 };
 
 QT_END_NAMESPACE
diff --git a/src/gui/painting/qpaintengine_p.h b/src/gui/painting/qpaintengine_p.h
index ebff9509ab..312320c2e2 100644
--- a/src/gui/painting/qpaintengine_p.h
+++ b/src/gui/painting/qpaintengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintengine_raster.cpp b/src/gui/painting/qpaintengine_raster.cpp
index 2f7e32285f..322bff9b57 100644
--- a/src/gui/painting/qpaintengine_raster.cpp
+++ b/src/gui/painting/qpaintengine_raster.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -415,32 +407,14 @@ void QRasterPaintEngine::init()
     case QImage::Format_Mono:
         d->mono_surface = true;
         break;
-    case QImage::Format_ARGB8565_Premultiplied:
-    case QImage::Format_ARGB8555_Premultiplied:
-    case QImage::Format_ARGB6666_Premultiplied:
-    case QImage::Format_ARGB4444_Premultiplied:
-    case QImage::Format_ARGB32_Premultiplied:
-    case QImage::Format_ARGB32:
-    case QImage::Format_RGBA8888_Premultiplied:
-    case QImage::Format_RGBA8888:
-        gccaps |= PorterDuff;
-        break;
-    case QImage::Format_RGB32:
-    case QImage::Format_RGB444:
-    case QImage::Format_RGB555:
-    case QImage::Format_RGB666:
-    case QImage::Format_RGB888:
-    case QImage::Format_RGB16:
-    case QImage::Format_RGBX8888:
-        break;
     default:
+        if (QImage::toPixelFormat(format).alphaUsage() == QPixelFormat::UsesAlpha)
+            gccaps |= PorterDuff;
         break;
     }
 }
 
 
-
-
 /*!
     Destroys this paint engine.
 */
@@ -2243,6 +2217,8 @@ void QRasterPaintEngine::drawImage(const QRectF &r, const QImage &img, const QRe
         case QImage::Format_ARGB8555_Premultiplied:
         case QImage::Format_ARGB4444_Premultiplied:
         case QImage::Format_RGBA8888_Premultiplied:
+        case QImage::Format_A2BGR30_Premultiplied:
+        case QImage::Format_A2RGB30_Premultiplied:
             // Combine premultiplied color with the opacity set on the painter.
             d->solid_color_filler.solid.color =
                 ((((color & 0x00ff00ff) * s->intOpacity) >> 8) & 0x00ff00ff)
diff --git a/src/gui/painting/qpaintengine_raster_p.h b/src/gui/painting/qpaintengine_raster_p.h
index 4bfdbd91e0..cee19ab598 100644
--- a/src/gui/painting/qpaintengine_raster_p.h
+++ b/src/gui/painting/qpaintengine_raster_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -250,7 +242,7 @@ private:
     QRect toNormalizedFillRect(const QRectF &rect);
 
     inline void ensureBrush(const QBrush &brush) {
-        if (!qbrush_fast_equals(state()->lastBrush, brush) || (brush.style() != Qt::NoBrush && state()->fillFlags))
+        if (!qbrush_fast_equals(state()->lastBrush, brush) || state()->fillFlags)
             updateBrush(brush);
     }
     inline void ensureBrush() { ensureBrush(state()->brush); }
diff --git a/src/gui/painting/qpaintengineex.cpp b/src/gui/painting/qpaintengineex.cpp
index 8487cf2394..0c3ea37b29 100644
--- a/src/gui/painting/qpaintengineex.cpp
+++ b/src/gui/painting/qpaintengineex.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpaintengineex_p.h b/src/gui/painting/qpaintengineex_p.h
index 5a9df72c76..82fcd9765a 100644
--- a/src/gui/painting/qpaintengineex_p.h
+++ b/src/gui/painting/qpaintengineex_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpainter.cpp b/src/gui/painting/qpainter.cpp
index 3f387d575b..2c34895918 100644
--- a/src/gui/painting/qpainter.cpp
+++ b/src/gui/painting/qpainter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -229,16 +221,11 @@ QTransform QPainterPrivate::viewTransform() const
 
 int QPainterPrivate::effectiveDevicePixelRatio() const
 {
-    // Limited feature introduction for Qt 5.0.0, remove ifdef in a later release.
-#ifdef Q_OS_MAC
     // Special cases for devices that does not support PdmDevicePixelRatio go here:
     if (device->devType() == QInternal::Printer)
         return 1;
 
     return qMax(1, device->metric(QPaintDevice::PdmDevicePixelRatio));
-#else
-    return 1;
-#endif
 }
 
 QTransform QPainterPrivate::hidpiScaleTransform() const
@@ -1111,6 +1098,11 @@ void QPainterPrivate::updateState(QPainterState *newState)
     \li \inlineimage qpainter-pathstroking.png
     \endtable
 
+    Text drawing is done using drawText(). When you need
+    fine-grained positioning, boundingRect() tells you where a given
+    drawText() command will draw.
+
+    \section1 Drawing Pixmaps and Images
 
     There are functions to draw pixmaps/images, namely drawPixmap(),
     drawImage() and drawTiledPixmap(). Both drawPixmap() and drawImage()
@@ -1118,15 +1110,25 @@ void QPainterPrivate::updateState(QPainterState *newState)
     on-screen while drawImage() may be faster on a QPrinter or other
     devices.
 
-    Text drawing is done using drawText(). When you need
-    fine-grained positioning, boundingRect() tells you where a given
-    drawText() command will draw.
-
     There is a drawPicture() function that draws the contents of an
     entire QPicture. The drawPicture() function is the only function
     that disregards all the painter's settings as QPicture has its own
     settings.
 
+    \section2 Drawing High Resolution Versions of Pixmaps and Images
+
+    High resolution versions of pixmaps have a \e{device pixel ratio} value larger
+    than 1 (see QImageReader, QPixmap::devicePixelRatio()). Should it match the value
+    of the underlying QPaintDevice, it is drawn directly onto the device with no
+    additional transformation applied.
+
+    This is for example the case when drawing a QPixmap of 64x64 pixels size with
+    a device pixel ratio of 2 onto a high DPI screen which also has
+    a device pixel ratio of 2. Note that the pixmap is then effectively 32x32
+    pixels in \e{user space}. Code paths in Qt that calculate layout geometry
+    based on the pixmap size will use this size. The net effect of this is that
+    the pixmap is displayed as high DPI pixmap rather than a large pixmap.
+
     \section1 Rendering Quality
 
     To get the optimal rendering result using QPainter, you should use
@@ -1348,14 +1350,7 @@ void QPainterPrivate::updateState(QPainterState *newState)
     and embedded devices supporting the OpenGL 2.0 or OpenGL/ES 2.0
     specification. This includes most graphics chips produced in the
     last couple of years. The engine can be enabled by using QPainter
-    onto a QOpenGLWidget or by passing \c {-graphicssystem opengl} on the
-    command line when the underlying system supports it.
-
-    \li OpenVG - This backend implements the Khronos standard for 2D
-    and Vector Graphics. It is primarily for embedded devices with
-    hardware support for OpenVG.  The engine can be enabled by
-    passing \c {-graphicssystem openvg} on the command line when
-    the underlying system supports it.
+    onto a QOpenGLWidget.
 
     \endlist
 
@@ -5029,6 +5024,8 @@ static inline QPointF roundInDeviceCoordinates(const QPointF &p, const QTransfor
     into the given \a target in the paint device.
 
     \note The pixmap is scaled to fit the rectangle, if both the pixmap and rectangle size disagree.
+    \note See \l{Drawing High Resolution Versions of Pixmaps and Images} on how this is affected
+    by QPixmap::devicePixelRatio().
 
     \table 100%
     \row
@@ -5043,7 +5040,7 @@ static inline QPointF roundInDeviceCoordinates(const QPointF &p, const QTransfor
     transparent. Drawing bitmaps with gradient or texture colors is
     not supported.
 
-    \sa drawImage()
+    \sa drawImage(), QPixmap::devicePixelRatio()
 */
 void QPainter::drawPixmap(const QPointF &p, const QPixmap &pm)
 {
@@ -5607,6 +5604,8 @@ void QPainterPrivate::drawGlyphs(const quint32 *glyphArray, QFixedPoint *positio
         staticTextItem.numGlyphs = glyphCount;
         staticTextItem.glyphs = reinterpret_cast<glyph_t *>(const_cast<glyph_t *>(glyphArray));
         staticTextItem.glyphPositions = positions;
+        // The font property is meaningless, the fontengine must be used directly:
+        staticTextItem.usesRawFont = true;
 
         extended->drawStaticTextItem(&staticTextItem);
     } else {
@@ -6422,6 +6421,7 @@ void QPainterPrivate::drawTextItem(const QPointF &p, const QTextItem &_ti, QText
                 continue;
 
 
+            multi->ensureEngineAt(which);
             QTextItemInt ti2 = ti.midItem(multi->engine(which), start, end - start);
             ti2.width = 0;
             // set the high byte to zero and calc the width
@@ -6449,6 +6449,7 @@ void QPainterPrivate::drawTextItem(const QPointF &p, const QTextItem &_ti, QText
             which = e;
         }
 
+        multi->ensureEngineAt(which);
         QTextItemInt ti2 = ti.midItem(multi->engine(which), start, end - start);
         ti2.width = 0;
         // set the high byte to zero and calc the width
@@ -7404,8 +7405,6 @@ void qt_format_text(const QFont &fnt, const QRectF &_r,
         tf |= Qt::TextDontPrint;
 
     uint maxUnderlines = 0;
-    int numUnderlines = 0;
-    QVarLengthArray<int, 32> underlinePositions(1);
 
     QFontMetricsF fm(fnt);
     QString text = str;
@@ -7436,11 +7435,11 @@ start_lengthVariant:
         }
     }
 
+    QList<QTextLayout::FormatRange> underlineFormats;
     int length = offset - old_offset;
     if ((hidemnmemonic || showmnemonic) && maxUnderlines > 0) {
-        underlinePositions.resize(maxUnderlines + 1);
-
         QChar *cout = text.data() + old_offset;
+        QChar *cout0 = cout;
         QChar *cin = cout;
         int l = length;
         while (l) {
@@ -7450,8 +7449,24 @@ start_lengthVariant:
                 --l;
                 if (!l)
                     break;
-                if (*cin != QLatin1Char('&') && !hidemnmemonic)
-                    underlinePositions[numUnderlines++] = cout - text.data() - old_offset;
+                if (*cin != QLatin1Char('&') && !hidemnmemonic && !(tf & Qt::TextDontPrint)) {
+                    QTextLayout::FormatRange range;
+                    range.start = cout - cout0;
+                    range.length = 1;
+                    range.format.setFontUnderline(true);
+                    underlineFormats.append(range);
+                }
+            } else if (hidemnmemonic && *cin == QLatin1Char('(') && l >= 4 &&
+                       cin[1] == QLatin1Char('&') && cin[2] != QLatin1Char('&') &&
+                       cin[3] == QLatin1Char(')')) {
+                int n = 0;
+                while ((cout - n) > cout0 && (cout - n - 1)->isSpace())
+                    ++n;
+                cout -= n;
+                cin += 4;
+                length -= n + 4;
+                l -= 4;
+                continue;
             }
             *cout = *cin;
             ++cout;
@@ -7460,11 +7475,6 @@ start_lengthVariant:
         }
     }
 
-    // no need to do extra work for underlines if we don't paint
-    if (tf & Qt::TextDontPrint)
-        numUnderlines = 0;
-
-    underlinePositions[numUnderlines] = -1;
     qreal height = 0;
     qreal width = 0;
 
@@ -7497,7 +7507,7 @@ start_lengthVariant:
         engine.forceJustification = true;
     QTextLayout textLayout(&engine);
     textLayout.setCacheEnabled(true);
-    textLayout.engine()->underlinePositions = underlinePositions.data();
+    textLayout.setAdditionalFormats(underlineFormats);
 
     if (finalText.isEmpty()) {
         height = fm.height();
@@ -7685,6 +7695,8 @@ void QPainterState::init(QPainter *p) {
     into the \a target rectangle in the paint device.
 
     \note The image is scaled to fit the rectangle, if both the image and rectangle size disagree.
+    \note See \l{Drawing High Resolution Versions of Pixmaps and Images} on how this is affected
+    by QImage::devicePixelRatio().
 
     If the image needs to be modified to fit in a lower-resolution
     result (e.g. converting from 32-bit to 8-bit), use the \a flags to
@@ -7696,7 +7708,7 @@ void QPainterState::init(QPainter *p) {
     \snippet code/src_gui_painting_qpainter.cpp 20
     \endtable
 
-    \sa drawPixmap()
+    \sa drawPixmap(), QImage::devicePixelRatio()
 */
 
 /*!
diff --git a/src/gui/painting/qpainter.h b/src/gui/painting/qpainter.h
index 874b244bd6..b791d3e908 100644
--- a/src/gui/painting/qpainter.h
+++ b/src/gui/painting/qpainter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpainter_p.h b/src/gui/painting/qpainter_p.h
index 04772b3ec9..f8dcfbf326 100644
--- a/src/gui/painting/qpainter_p.h
+++ b/src/gui/painting/qpainter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpainterpath.cpp b/src/gui/painting/qpainterpath.cpp
index aa2b9bea54..1931bcdf90 100644
--- a/src/gui/painting/qpainterpath.cpp
+++ b/src/gui/painting/qpainterpath.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1644,7 +1636,8 @@ QList<QPolygonF> QPainterPath::toFillPolygons(const QTransform &matrix) const
     if (count == 0)
         return polys;
 
-    QList<QRectF> bounds;
+    QVector<QRectF> bounds;
+    bounds.reserve(count);
     for (int i=0; i<count; ++i)
         bounds += subpaths.at(i).boundingRect();
 
diff --git a/src/gui/painting/qpainterpath.h b/src/gui/painting/qpainterpath.h
index db65e14af9..39b65dd1e9 100644
--- a/src/gui/painting/qpainterpath.h
+++ b/src/gui/painting/qpainterpath.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpainterpath_p.h b/src/gui/painting/qpainterpath_p.h
index cefff0a4ba..de4f169584 100644
--- a/src/gui/painting/qpainterpath_p.h
+++ b/src/gui/painting/qpainterpath_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpathclipper.cpp b/src/gui/painting/qpathclipper.cpp
index 61a6587233..39c21a2f47 100644
--- a/src/gui/painting/qpathclipper.cpp
+++ b/src/gui/painting/qpathclipper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpathclipper_p.h b/src/gui/painting/qpathclipper_p.h
index 45cce640c5..5475503f22 100644
--- a/src/gui/painting/qpathclipper_p.h
+++ b/src/gui/painting/qpathclipper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpathsimplifier.cpp b/src/gui/painting/qpathsimplifier.cpp
index 1e9c483ff8..c2d95c28d2 100644
--- a/src/gui/painting/qpathsimplifier.cpp
+++ b/src/gui/painting/qpathsimplifier.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDeclarative module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpathsimplifier_p.h b/src/gui/painting/qpathsimplifier_p.h
index b39384428e..485bac34a1 100644
--- a/src/gui/painting/qpathsimplifier_p.h
+++ b/src/gui/painting/qpathsimplifier_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDeclarative module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpdf.cpp b/src/gui/painting/qpdf.cpp
index 0c888d645d..d1b021d653 100644
--- a/src/gui/painting/qpdf.cpp
+++ b/src/gui/painting/qpdf.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpdf_p.h b/src/gui/painting/qpdf_p.h
index e9459eff83..0fffa608ac 100644
--- a/src/gui/painting/qpdf_p.h
+++ b/src/gui/painting/qpdf_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpdfwriter.cpp b/src/gui/painting/qpdfwriter.cpp
index b856d6625c..877a1368b7 100644
--- a/src/gui/painting/qpdfwriter.cpp
+++ b/src/gui/painting/qpdfwriter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpdfwriter.h b/src/gui/painting/qpdfwriter.h
index 747ce380e7..97bf3b5bd3 100644
--- a/src/gui/painting/qpdfwriter.h
+++ b/src/gui/painting/qpdfwriter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpen.cpp b/src/gui/painting/qpen.cpp
index c0b3769c2d..c3bc7964a3 100644
--- a/src/gui/painting/qpen.cpp
+++ b/src/gui/painting/qpen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -327,17 +319,29 @@ QPen::QPen(const QBrush &brush, qreal width, Qt::PenStyle s, Qt::PenCapStyle c,
 QPen::QPen(const QPen &p)
 {
     d = p.d;
-    d->ref.ref();
+    if (d)
+        d->ref.ref();
 }
 
 
 /*!
+    \fn QPen::QPen(QPen &&pen)
+    \since 5.4
+
+    Constructs a pen that is moved from the given \a pen.
+
+    The moved-from pen can only be assigned to, copied, or
+    destroyed. Any other operation (prior to assignment) leads to
+    undefined behavior.
+*/
+
+/*!
     Destroys the pen.
 */
 
 QPen::~QPen()
 {
-    if (!d->ref.deref())
+    if (d && !d->ref.deref())
         delete d;
 }
 
@@ -373,7 +377,7 @@ void QPen::detach()
 
 QPen &QPen::operator=(const QPen &p)
 {
-    qAtomicAssign(d, p.d);
+    QPen(p).swap(*this);
     return *this;
 }
 
diff --git a/src/gui/painting/qpen.h b/src/gui/painting/qpen.h
index c5144f784f..30f55cd4ce 100644
--- a/src/gui/painting/qpen.h
+++ b/src/gui/painting/qpen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -72,6 +64,8 @@ public:
 
     QPen &operator=(const QPen &pen);
 #ifdef Q_COMPILER_RVALUE_REFS
+    inline QPen(QPen &&other)
+        : d(other.d) { other.d = 0; }
     inline QPen &operator=(QPen &&other)
     { qSwap(d, other.d); return *this; }
 #endif
diff --git a/src/gui/painting/qpen_p.h b/src/gui/painting/qpen_p.h
index 31781d76b5..902e0c493c 100644
--- a/src/gui/painting/qpen_p.h
+++ b/src/gui/painting/qpen_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qplatformbackingstore.cpp b/src/gui/painting/qplatformbackingstore.cpp
index 0fe883cf2b..e87f796888 100644
--- a/src/gui/painting/qplatformbackingstore.cpp
+++ b/src/gui/painting/qplatformbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,6 +73,7 @@ public:
 #ifndef QT_NO_OPENGL
     mutable GLuint textureId;
     mutable QSize textureSize;
+    mutable bool needsSwizzle;
     QOpenGLTextureBlitter *blitter;
 #endif
 };
@@ -91,6 +84,7 @@ struct QBackingstoreTextureInfo
 {
     GLuint textureId;
     QRect rect;
+    bool stacksOnTop;
 };
 
 Q_DECLARE_TYPEINFO(QBackingstoreTextureInfo, Q_MOVABLE_TYPE);
@@ -128,6 +122,12 @@ GLuint QPlatformTextureList::textureId(int index) const
     return d->textures.at(index).textureId;
 }
 
+bool QPlatformTextureList::stacksOnTop(int index) const
+{
+    Q_D(const QPlatformTextureList);
+    return d->textures.at(index).stacksOnTop;
+}
+
 QRect QPlatformTextureList::geometry(int index) const
 {
     Q_D(const QPlatformTextureList);
@@ -149,12 +149,13 @@ bool QPlatformTextureList::isLocked() const
     return d->locked;
 }
 
-void QPlatformTextureList::appendTexture(GLuint textureId, const QRect &geometry)
+void QPlatformTextureList::appendTexture(GLuint textureId, const QRect &geometry, bool stacksOnTop)
 {
     Q_D(QPlatformTextureList);
     QBackingstoreTextureInfo bi;
     bi.textureId = textureId;
     bi.rect = geometry;
+    bi.stacksOnTop = stacksOnTop;
     d->textures.append(bi);
 }
 
@@ -222,13 +223,16 @@ static QRegion deviceRegion(const QRegion &region, QWindow *window)
 
 void QPlatformBackingStore::composeAndFlush(QWindow *window, const QRegion &region,
                                             const QPoint &offset,
-                                            QPlatformTextureList *textures, QOpenGLContext *context)
+                                            QPlatformTextureList *textures, QOpenGLContext *context,
+                                            bool translucentBackground)
 {
     Q_UNUSED(offset);
 
     context->makeCurrent(window);
     QOpenGLFunctions *funcs = context->functions();
     funcs->glViewport(0, 0, window->width() * window->devicePixelRatio(), window->height() * window->devicePixelRatio());
+    funcs->glClearColor(0, 0, 0, translucentBackground ? 0 : 1);
+    funcs->glClear(GL_COLOR_BUFFER_BIT);
 
     if (!d_ptr->blitter) {
         d_ptr->blitter = new QOpenGLTextureBlitter;
@@ -239,29 +243,46 @@ void QPlatformBackingStore::composeAndFlush(QWindow *window, const QRegion &regi
 
     QRect windowRect(QPoint(), window->size() * window->devicePixelRatio());
 
+    // Textures for renderToTexture widgets.
     for (int i = 0; i < textures->count(); ++i) {
-        GLuint textureId = textures->textureId(i);
-        funcs->glBindTexture(GL_TEXTURE_2D, textureId);
-
-        QRect targetRect = deviceRect(textures->geometry(i), window);
-        QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(targetRect, windowRect);
-        d_ptr->blitter->blit(textureId, target, QOpenGLTextureBlitter::OriginBottomLeft);
+        if (!textures->stacksOnTop(i)) {
+            QRect targetRect = deviceRect(textures->geometry(i), window);
+            QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(targetRect, windowRect);
+            d_ptr->blitter->blit(textures->textureId(i), target, QOpenGLTextureBlitter::OriginBottomLeft);
+        }
     }
 
-    GLuint textureId = toTexture(deviceRegion(region, window), &d_ptr->textureSize);
-    if (!textureId)
-        return;
-
     funcs->glEnable(GL_BLEND);
     funcs->glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+    // Do not write out alpha. We need blending, but only for RGB. The toplevel may have
+    // alpha enabled in which case blending (writing out < 1.0 alpha values) would lead to
+    // semi-transparency even when it is not wanted.
+    funcs->glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_FALSE);
+
+    // Backingstore texture with the normal widgets.
+    GLuint textureId = toTexture(deviceRegion(region, window), &d_ptr->textureSize, &d_ptr->needsSwizzle);
+    if (textureId) {
+        QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(QRect(QPoint(), d_ptr->textureSize), windowRect);
+        if (d_ptr->needsSwizzle)
+            d_ptr->blitter->setSwizzleRB(true);
+        d_ptr->blitter->blit(textureId, target, QOpenGLTextureBlitter::OriginTopLeft);
+        if (d_ptr->needsSwizzle)
+            d_ptr->blitter->setSwizzleRB(false);
+    }
 
-    QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(QRect(QPoint(), d_ptr->textureSize), windowRect);
-    d_ptr->blitter->setSwizzleRB(true);
-    d_ptr->blitter->blit(textureId, target, QOpenGLTextureBlitter::OriginTopLeft);
-    d_ptr->blitter->setSwizzleRB(false);
+    // Textures for renderToTexture widgets that have WA_AlwaysStackOnTop set.
+    for (int i = 0; i < textures->count(); ++i) {
+        if (textures->stacksOnTop(i)) {
+            QRect targetRect = deviceRect(textures->geometry(i), window);
+            QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(targetRect, windowRect);
+            d_ptr->blitter->blit(textures->textureId(i), target, QOpenGLTextureBlitter::OriginBottomLeft);
+        }
+    }
 
+    funcs->glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE);
     funcs->glDisable(GL_BLEND);
     d_ptr->blitter->release();
+
     context->swapBuffers(window);
 }
 
@@ -291,9 +312,15 @@ QImage QPlatformBackingStore::toImage() const
   The default implementation returns a cached texture if \a dirtyRegion is
   empty and the window has not been resized, otherwise it retrieves the
   content using toImage() and performs a texture upload.
- */
 
-GLuint QPlatformBackingStore::toTexture(const QRegion &dirtyRegion, QSize *textureSize) const
+  If the red and blue components have to swapped, \a needsSwizzle will be set to \c true.
+  This allows creating textures from images in formats like QImage::Format_RGB32 without
+  any further image conversion. Instead, the swizzling will be done in the shaders when
+  performing composition. Other formats, that do not need such swizzling due to being
+  already byte ordered RGBA, for example QImage::Format_RGBA8888, must result in having \a
+  needsSwizzle set to false.
+ */
+GLuint QPlatformBackingStore::toTexture(const QRegion &dirtyRegion, QSize *textureSize, bool *needsSwizzle) const
 {
     QImage image = toImage();
     QSize imageSize = image.size();
@@ -304,8 +331,16 @@ GLuint QPlatformBackingStore::toTexture(const QRegion &dirtyRegion, QSize *textu
     if (dirtyRegion.isEmpty() && !resized)
         return d_ptr->textureId;
 
-    if (image.format() != QImage::Format_RGB32 && image.format() != QImage::Format_RGBA8888)
-        image = image.convertToFormat(QImage::Format_RGBA8888);
+    // Fast path for RGB32 and RGBA8888, convert everything else to RGBA8888.
+    if (image.format() == QImage::Format_RGB32) {
+        if (needsSwizzle)
+            *needsSwizzle = true;
+    } else {
+        if (needsSwizzle)
+            *needsSwizzle = false;
+        if (image.format() != QImage::Format_RGBA8888)
+            image = image.convertToFormat(QImage::Format_RGBA8888);
+    }
 
     QOpenGLFunctions *funcs = QOpenGLContext::currentContext()->functions();
 
@@ -322,8 +357,8 @@ GLuint QPlatformBackingStore::toTexture(const QRegion &dirtyRegion, QSize *textu
 #endif
         funcs->glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
         funcs->glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-        funcs->glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
-        funcs->glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
+        funcs->glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
+        funcs->glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
 
         funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, imageSize.width(), imageSize.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE,
                             const_cast<uchar*>(image.constBits()));
@@ -335,29 +370,32 @@ GLuint QPlatformBackingStore::toTexture(const QRegion &dirtyRegion, QSize *textu
         QRect rect = dirtyRegion.boundingRect() & imageRect;
 
 #ifndef QT_OPENGL_ES_2
-        funcs->glPixelStorei(GL_UNPACK_ROW_LENGTH, image.width());
-        funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, rect.x(), rect.y(), rect.width(), rect.height(), GL_RGBA, GL_UNSIGNED_BYTE,
-                               image.constScanLine(rect.y()) + rect.x() * 4);
-        funcs->glPixelStorei(GL_UNPACK_ROW_LENGTH, 0);
-#else
-        // if the rect is wide enough it's cheaper to just
-        // extend it instead of doing an image copy
-        if (rect.width() >= imageRect.width() / 2) {
-            rect.setX(0);
-            rect.setWidth(imageRect.width());
-        }
-
-        // if the sub-rect is full-width we can pass the image data directly to
-        // OpenGL instead of copying, since there's no gap between scanlines
-
-        if (rect.width() == imageRect.width()) {
-            funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, 0, rect.y(), rect.width(), rect.height(), GL_RGBA, GL_UNSIGNED_BYTE,
-                                   image.constScanLine(rect.y()));
-        } else {
+        if (!QOpenGLContext::currentContext()->isOpenGLES()) {
+            funcs->glPixelStorei(GL_UNPACK_ROW_LENGTH, image.width());
             funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, rect.x(), rect.y(), rect.width(), rect.height(), GL_RGBA, GL_UNSIGNED_BYTE,
-                                   image.copy(rect).constBits());
-        }
+                                   image.constScanLine(rect.y()) + rect.x() * 4);
+            funcs->glPixelStorei(GL_UNPACK_ROW_LENGTH, 0);
+        } else
 #endif
+        {
+            // if the rect is wide enough it's cheaper to just
+            // extend it instead of doing an image copy
+            if (rect.width() >= imageRect.width() / 2) {
+                rect.setX(0);
+                rect.setWidth(imageRect.width());
+            }
+
+            // if the sub-rect is full-width we can pass the image data directly to
+            // OpenGL instead of copying, since there's no gap between scanlines
+
+            if (rect.width() == imageRect.width()) {
+                funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, 0, rect.y(), rect.width(), rect.height(), GL_RGBA, GL_UNSIGNED_BYTE,
+                                       image.constScanLine(rect.y()));
+            } else {
+                funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, rect.x(), rect.y(), rect.width(), rect.height(), GL_RGBA, GL_UNSIGNED_BYTE,
+                                       image.copy(rect).constBits());
+            }
+        }
     }
 
     return d_ptr->textureId;
diff --git a/src/gui/painting/qplatformbackingstore.h b/src/gui/painting/qplatformbackingstore.h
index 4728622cac..52c263f05d 100644
--- a/src/gui/painting/qplatformbackingstore.h
+++ b/src/gui/painting/qplatformbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -84,10 +76,11 @@ public:
     bool isEmpty() const { return count() == 0; }
     GLuint textureId(int index) const;
     QRect geometry(int index) const;
+    bool stacksOnTop(int index) const;
     void lock(bool on);
     bool isLocked() const;
 
-    void appendTexture(GLuint textureId, const QRect &geometry);
+    void appendTexture(GLuint textureId, const QRect &geometry, bool stacksOnTop = false);
     void clear();
 
  Q_SIGNALS:
@@ -109,9 +102,11 @@ public:
     // offset is the (child) window's offset in relation to the window surface.
     virtual void flush(QWindow *window, const QRegion &region, const QPoint &offset) = 0;
 #ifndef QT_NO_OPENGL
-    virtual void composeAndFlush(QWindow *window, const QRegion &region, const QPoint &offset, QPlatformTextureList *textures, QOpenGLContext *context);
+    virtual void composeAndFlush(QWindow *window, const QRegion &region, const QPoint &offset,
+                                 QPlatformTextureList *textures, QOpenGLContext *context,
+                                 bool translucentBackground);
     virtual QImage toImage() const;
-    virtual GLuint toTexture(const QRegion &dirtyRegion, QSize *textureSize) const;
+    virtual GLuint toTexture(const QRegion &dirtyRegion, QSize *textureSize, bool *needsSwizzle) const;
 #endif
 
     virtual void resize(const QSize &size, const QRegion &staticContents) = 0;
diff --git a/src/gui/painting/qpolygon.cpp b/src/gui/painting/qpolygon.cpp
index ef8fc28f12..75b96d0915 100644
--- a/src/gui/painting/qpolygon.cpp
+++ b/src/gui/painting/qpolygon.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qpolygon.h b/src/gui/painting/qpolygon.h
index 1039e842ab..3c004878ba 100644
--- a/src/gui/painting/qpolygon.h
+++ b/src/gui/painting/qpolygon.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -71,8 +63,8 @@ public:
     void translate(int dx, int dy);
     void translate(const QPoint &offset);
 
-    QPolygon translated(int dx, int dy) const;
-    inline QPolygon translated(const QPoint &offset) const;
+    QPolygon translated(int dx, int dy) const Q_REQUIRED_RESULT;
+    inline QPolygon translated(const QPoint &offset) const Q_REQUIRED_RESULT;
 
     QRect boundingRect() const;
 
@@ -88,9 +80,9 @@ public:
 
     bool containsPoint(const QPoint &pt, Qt::FillRule fillRule) const;
 
-    QPolygon united(const QPolygon &r) const;
-    QPolygon intersected(const QPolygon &r) const;
-    QPolygon subtracted(const QPolygon &r) const;
+    QPolygon united(const QPolygon &r) const Q_REQUIRED_RESULT;
+    QPolygon intersected(const QPolygon &r) const Q_REQUIRED_RESULT;
+    QPolygon subtracted(const QPolygon &r) const Q_REQUIRED_RESULT;
 };
 
 inline QPolygon::QPolygon(int asize) : QVector<QPoint>(asize) {}
diff --git a/src/gui/painting/qpolygonclipper_p.h b/src/gui/painting/qpolygonclipper_p.h
index 7bbe8b27b3..1277252df5 100644
--- a/src/gui/painting/qpolygonclipper_p.h
+++ b/src/gui/painting/qpolygonclipper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qrasterdefs_p.h b/src/gui/painting/qrasterdefs_p.h
index 9e6d55c8f1..f7ff9aaa67 100644
--- a/src/gui/painting/qrasterdefs_p.h
+++ b/src/gui/painting/qrasterdefs_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qrasterizer.cpp b/src/gui/painting/qrasterizer.cpp
index a7e7d89ec4..a86fcfd977 100644
--- a/src/gui/painting/qrasterizer.cpp
+++ b/src/gui/painting/qrasterizer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qrasterizer_p.h b/src/gui/painting/qrasterizer_p.h
index 70155eb946..2801eef6ea 100644
--- a/src/gui/painting/qrasterizer_p.h
+++ b/src/gui/painting/qrasterizer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qregion.cpp b/src/gui/painting/qregion.cpp
index f1f6a51305..c556edd4c0 100644
--- a/src/gui/painting/qregion.cpp
+++ b/src/gui/painting/qregion.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -248,7 +240,7 @@ QRegion::QRegion(int x, int y, int w, int h, RegionType t)
 
 void QRegion::detach()
 {
-    if (d->ref.load() != 1)
+    if (d->ref.isShared())
         *this = copy();
 }
 
@@ -450,7 +442,10 @@ QDebug operator<<(QDebug s, const QRegion &r)
 
     \sa united(), operator+()
 */
-const QRegion QRegion::operator|(const QRegion &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator|(const QRegion &r) const
     { return united(r); }
 
 /*!
@@ -459,14 +454,20 @@ const QRegion QRegion::operator|(const QRegion &r) const
 
     \sa united(), operator|()
 */
-const QRegion QRegion::operator+(const QRegion &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator+(const QRegion &r) const
     { return united(r); }
 
 /*!
    \overload
    \since 4.4
  */
-const QRegion QRegion::operator+(const QRect &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator+(const QRect &r) const
     { return united(r); }
 
 /*!
@@ -475,14 +476,20 @@ const QRegion QRegion::operator+(const QRect &r) const
 
     \sa intersected()
 */
-const QRegion QRegion::operator&(const QRegion &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator&(const QRegion &r) const
     { return intersected(r); }
 
 /*!
    \overload
    \since 4.4
  */
-const QRegion QRegion::operator&(const QRect &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator&(const QRect &r) const
 {
     return intersected(r);
 }
@@ -493,7 +500,10 @@ const QRegion QRegion::operator&(const QRect &r) const
 
     \sa subtracted()
 */
-const QRegion QRegion::operator-(const QRegion &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator-(const QRegion &r) const
     { return subtracted(r); }
 
 /*!
@@ -502,7 +512,10 @@ const QRegion QRegion::operator-(const QRegion &r) const
 
     \sa xored()
 */
-const QRegion QRegion::operator^(const QRegion &r) const
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+const
+#endif
+QRegion QRegion::operator^(const QRegion &r) const
     { return xored(r); }
 
 /*!
@@ -1066,34 +1079,18 @@ Q_GUI_EXPORT QPainterPath qt_regionToPath(const QRegion &region)
 
 struct QRegionPrivate {
     int numRects;
+    int innerArea;
     QVector<QRect> rects;
     QRect extents;
     QRect innerRect;
-    int innerArea;
 
     inline QRegionPrivate() : numRects(0), innerArea(-1) {}
-    inline QRegionPrivate(const QRect &r) {
-        numRects = 1;
-        extents = r;
-        innerRect = r;
-        innerArea = r.width() * r.height();
-    }
-
-    inline QRegionPrivate(const QRegionPrivate &r) {
-        rects = r.rects;
-        numRects = r.numRects;
-        extents = r.extents;
-        innerRect = r.innerRect;
-        innerArea = r.innerArea;
-    }
-
-    inline QRegionPrivate &operator=(const QRegionPrivate &r) {
-        rects = r.rects;
-        numRects = r.numRects;
-        extents = r.extents;
-        innerRect = r.innerRect;
-        innerArea = r.innerArea;
-        return *this;
+    inline QRegionPrivate(const QRect &r)
+        : numRects(1),
+          innerArea(r.width() * r.height()),
+          extents(r),
+          innerRect(r)
+    {
     }
 
     void intersect(const QRect &r);
@@ -1591,7 +1588,7 @@ void QRegionPrivate::selfTest() const
 #endif // QT_REGION_DEBUG
 
 static QRegionPrivate qrp;
-QRegion::QRegionData QRegion::shared_empty = {Q_BASIC_ATOMIC_INITIALIZER(1), &qrp};
+const QRegion::QRegionData QRegion::shared_empty = {Q_REFCOUNT_INITIALIZE_STATIC, &qrp};
 
 typedef void (*OverlapFunc)(QRegionPrivate &dest, const QRect *r1, const QRect *r1End,
                             const QRect *r2, const QRect *r2End, int y1, int y2);
@@ -2950,11 +2947,11 @@ typedef struct {
 
 typedef struct _EdgeTableEntry {
      int ymax;             /* ycoord at which we exit this edge. */
+     int ClockWise;        /* flag for winding number rule       */
      BRESINFO bres;        /* Bresenham info to run the edge     */
      struct _EdgeTableEntry *next;       /* next in the list     */
      struct _EdgeTableEntry *back;       /* for insertion sort   */
      struct _EdgeTableEntry *nextWETE;   /* for winding num rule */
-     int ClockWise;        /* flag for winding number rule       */
 } EdgeTableEntry;
 
 
@@ -3475,7 +3472,7 @@ static void PtsToRegion(int numFullPtBlocks, int iCurPtBlock,
                 }
 
                 if (rowSize) {
-                    QPoint *next = i ? &pts[2] : (numFullPtBlocks ? CurPtBlock->next->pts : 0);
+                    QPoint *next = i ? &pts[2] : (numFullPtBlocks && iCurPtBlock ? CurPtBlock->next->pts : Q_NULLPTR);
 
                     if (!next || next->y() != pts[0].y()) {
                         flushRow(row.data(), pts[0].y(), rowSize, reg, &lastRow, &extendTo, &needsExtend);
@@ -3537,8 +3534,7 @@ static QRegionPrivate *PolygonRegion(const QPoint *Pts, int Count, int rule)
     POINTBLOCK *tmpPtBlock;
     int numFullPtBlocks = 0;
 
-    if (!(region = new QRegionPrivate))
-        return 0;
+    region = new QRegionPrivate;
 
         /* special case a rectangle */
     if (((Count == 4) ||
@@ -3792,19 +3788,17 @@ QRegionPrivate *qt_bitmapToRegion(const QBitmap& bitmap)
 }
 
 QRegion::QRegion()
-    : d(&shared_empty)
+    : d(const_cast<QRegionData*>(&shared_empty))
 {
-    d->ref.ref();
 }
 
 QRegion::QRegion(const QRect &r, RegionType t)
 {
     if (r.isEmpty()) {
-        d = &shared_empty;
-        d->ref.ref();
+        d = const_cast<QRegionData*>(&shared_empty);
     } else {
         d = new QRegionData;
-        d->ref.store(1);
+        d->ref.initializeOwned();
         if (t == Rectangle) {
             d->qt_rgn = new QRegionPrivate(r);
         } else if (t == Ellipse) {
@@ -3823,15 +3817,13 @@ QRegion::QRegion(const QPolygon &a, Qt::FillRule fillRule)
                                                fillRule == Qt::WindingFill ? WindingRule : EvenOddRule);
         if (qt_rgn) {
             d =  new QRegionData;
-            d->ref.store(1);
+            d->ref.initializeOwned();
             d->qt_rgn = qt_rgn;
         } else {
-            d = &shared_empty;
-            d->ref.ref();
+            d = const_cast<QRegionData*>(&shared_empty);
         }
     } else {
-        d = &shared_empty;
-        d->ref.ref();
+        d = const_cast<QRegionData*>(&shared_empty);
     }
 }
 
@@ -3845,11 +3837,10 @@ QRegion::QRegion(const QRegion &r)
 QRegion::QRegion(const QBitmap &bm)
 {
     if (bm.isNull()) {
-        d = &shared_empty;
-        d->ref.ref();
+        d = const_cast<QRegionData*>(&shared_empty);
     } else {
         d = new QRegionData;
-        d->ref.store(1);
+        d->ref.initializeOwned();
         d->qt_rgn = qt_bitmapToRegion(bm);
     }
 }
@@ -3884,7 +3875,7 @@ QRegion QRegion::copy() const
 {
     QRegion r;
     QScopedPointer<QRegionData> x(new QRegionData);
-    x->ref.store(1);
+    x->ref.initializeOwned();
     if (d->qt_rgn)
         x->qt_rgn = new QRegionPrivate(*d->qt_rgn);
     else
diff --git a/src/gui/painting/qregion.h b/src/gui/painting/qregion.h
index 0e436e3fb4..79a715d9e9 100644
--- a/src/gui/painting/qregion.h
+++ b/src/gui/painting/qregion.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -86,23 +78,23 @@ public:
 
     void translate(int dx, int dy);
     inline void translate(const QPoint &p) { translate(p.x(), p.y()); }
-    QRegion translated(int dx, int dy) const;
-    inline QRegion translated(const QPoint &p) const { return translated(p.x(), p.y()); }
+    QRegion translated(int dx, int dy) const Q_REQUIRED_RESULT;
+    inline QRegion translated(const QPoint &p) const Q_REQUIRED_RESULT { return translated(p.x(), p.y()); }
 
-    QRegion united(const QRegion &r) const;
-    QRegion united(const QRect &r) const;
-    QRegion intersected(const QRegion &r) const;
-    QRegion intersected(const QRect &r) const;
-    QRegion subtracted(const QRegion &r) const;
-    QRegion xored(const QRegion &r) const;
+    QRegion united(const QRegion &r) const Q_REQUIRED_RESULT;
+    QRegion united(const QRect &r) const Q_REQUIRED_RESULT;
+    QRegion intersected(const QRegion &r) const Q_REQUIRED_RESULT;
+    QRegion intersected(const QRect &r) const Q_REQUIRED_RESULT;
+    QRegion subtracted(const QRegion &r) const Q_REQUIRED_RESULT;
+    QRegion xored(const QRegion &r) const Q_REQUIRED_RESULT;
 
 #if QT_DEPRECATED_SINCE(5, 0)
-    inline QT_DEPRECATED QRegion unite(const QRegion &r) const { return united(r); }
-    inline QT_DEPRECATED QRegion unite(const QRect &r) const { return united(r); }
-    inline QT_DEPRECATED QRegion intersect(const QRegion &r) const { return intersected(r); }
-    inline QT_DEPRECATED QRegion intersect(const QRect &r) const { return intersected(r); }
-    inline QT_DEPRECATED QRegion subtract(const QRegion &r) const { return subtracted(r); }
-    inline QT_DEPRECATED QRegion eor(const QRegion &r) const { return xored(r); }
+    inline QT_DEPRECATED QRegion unite(const QRegion &r) const Q_REQUIRED_RESULT { return united(r); }
+    inline QT_DEPRECATED QRegion unite(const QRect &r) const Q_REQUIRED_RESULT { return united(r); }
+    inline QT_DEPRECATED QRegion intersect(const QRegion &r) const Q_REQUIRED_RESULT { return intersected(r); }
+    inline QT_DEPRECATED QRegion intersect(const QRect &r) const Q_REQUIRED_RESULT { return intersected(r); }
+    inline QT_DEPRECATED QRegion subtract(const QRegion &r) const Q_REQUIRED_RESULT { return subtracted(r); }
+    inline QT_DEPRECATED QRegion eor(const QRegion &r) const Q_REQUIRED_RESULT { return xored(r); }
 #endif
 
     bool intersects(const QRegion &r) const;
@@ -112,7 +104,8 @@ public:
     QVector<QRect> rects() const;
     void setRects(const QRect *rect, int num);
     int rectCount() const;
-
+#ifdef Q_COMPILER_MANGLES_RETURN_TYPE
+    // ### Qt 6: remove these, they're kept for MSVC compat
     const QRegion operator|(const QRegion &r) const;
     const QRegion operator+(const QRegion &r) const;
     const QRegion operator+(const QRect &r) const;
@@ -120,6 +113,15 @@ public:
     const QRegion operator&(const QRect &r) const;
     const QRegion operator-(const QRegion &r) const;
     const QRegion operator^(const QRegion &r) const;
+#else
+    QRegion operator|(const QRegion &r) const;
+    QRegion operator+(const QRegion &r) const;
+    QRegion operator+(const QRect &r) const;
+    QRegion operator&(const QRegion &r) const;
+    QRegion operator&(const QRect &r) const;
+    QRegion operator-(const QRegion &r) const;
+    QRegion operator^(const QRegion &r) const;
+#endif // Q_COMPILER_MANGLES_RETURN_TYPE
     QRegion& operator|=(const QRegion &r);
     QRegion& operator+=(const QRegion &r);
     QRegion& operator+=(const QRect &r);
@@ -148,11 +150,11 @@ Q_GUI_EXPORT
     void exec(const QByteArray &ba, int ver = 0, QDataStream::ByteOrder byteOrder = QDataStream::BigEndian);
 #endif
     struct QRegionData {
-        QBasicAtomicInt ref;
+        QtPrivate::RefCount ref;
         QRegionPrivate *qt_rgn;
     };
     struct QRegionData *d;
-    static struct QRegionData shared_empty;
+    static const struct QRegionData shared_empty;
     static void cleanUp(QRegionData *x);
 };
 
diff --git a/src/gui/painting/qrgb.h b/src/gui/painting/qrgb.h
index d8e19302d1..6b0516e557 100644
--- a/src/gui/painting/qrgb.h
+++ b/src/gui/painting/qrgb.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qstroker.cpp b/src/gui/painting/qstroker.cpp
index d6ac03fe28..d7a4a2ad91 100644
--- a/src/gui/painting/qstroker.cpp
+++ b/src/gui/painting/qstroker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qstroker_p.h b/src/gui/painting/qstroker_p.h
index 8ed4ce4aef..756669239c 100644
--- a/src/gui/painting/qstroker_p.h
+++ b/src/gui/painting/qstroker_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qt_mips_asm_dsp_p.h b/src/gui/painting/qt_mips_asm_dsp_p.h
index 54fcfab206..6f9cf0dcda 100644
--- a/src/gui/painting/qt_mips_asm_dsp_p.h
+++ b/src/gui/painting/qt_mips_asm_dsp_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qtextureglyphcache.cpp b/src/gui/painting/qtextureglyphcache.cpp
index 83edeb41a6..e12d61bbf4 100644
--- a/src/gui/painting/qtextureglyphcache.cpp
+++ b/src/gui/painting/qtextureglyphcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,20 +42,6 @@ QT_BEGIN_NAMESPACE
 
 // #define CACHE_DEBUG
 
-// returns the highest number closest to v, which is a power of 2
-// NB! assumes 32 bit ints
-static inline int qt_next_power_of_two(int v)
-{
-    v--;
-    v |= v >> 1;
-    v |= v >> 2;
-    v |= v >> 4;
-    v |= v >> 8;
-    v |= v >> 16;
-    ++v;
-    return v;
-}
-
 int QTextureGlyphCache::calculateSubPixelPositionCount(glyph_t glyph) const
 {
     // Test 12 different subpixel positions since it factors into 3*4 so it gives
@@ -199,7 +177,7 @@ bool QTextureGlyphCache::populate(QFontEngine *fontEngine, int numGlyphs, const
         if (fontEngine->maxCharWidth() <= QT_DEFAULT_TEXTURE_GLYPH_CACHE_WIDTH)
             m_w = QT_DEFAULT_TEXTURE_GLYPH_CACHE_WIDTH;
         else
-            m_w = qt_next_power_of_two(fontEngine->maxCharWidth());
+            m_w = qNextPowerOfTwo(qCeil(fontEngine->maxCharWidth()) - 1);
     }
 
     // now actually use the coords and paint the wanted glyps into cache.
@@ -261,9 +239,9 @@ void QTextureGlyphCache::fillInPendingGlyphs()
 
     if (isNull() || requiredHeight > m_h || requiredWidth > m_w) {
         if (isNull())
-            createCache(qt_next_power_of_two(requiredWidth), qt_next_power_of_two(requiredHeight));
+            createCache(qNextPowerOfTwo(requiredWidth - 1), qNextPowerOfTwo(requiredHeight - 1));
         else
-            resizeCache(qt_next_power_of_two(requiredWidth), qt_next_power_of_two(requiredHeight));
+            resizeCache(qNextPowerOfTwo(requiredWidth - 1), qNextPowerOfTwo(requiredHeight - 1));
     }
 
     {
diff --git a/src/gui/painting/qtextureglyphcache_p.h b/src/gui/painting/qtextureglyphcache_p.h
index 84f62717f6..50c2c9dcc6 100644
--- a/src/gui/painting/qtextureglyphcache_p.h
+++ b/src/gui/painting/qtextureglyphcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qtransform.cpp b/src/gui/painting/qtransform.cpp
index c79a77cc63..04a97aabcb 100644
--- a/src/gui/painting/qtransform.cpp
+++ b/src/gui/painting/qtransform.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/painting/qtransform.h b/src/gui/painting/qtransform.h
index 25b0e7c2fa..68c4548644 100644
--- a/src/gui/painting/qtransform.h
+++ b/src/gui/painting/qtransform.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -104,9 +96,9 @@ public:
                    qreal m21, qreal m22, qreal m23,
                    qreal m31, qreal m32, qreal m33);
 
-    QTransform inverted(bool *invertible = 0) const;
-    QTransform adjoint() const;
-    QTransform transposed() const;
+    QTransform inverted(bool *invertible = 0) const Q_REQUIRED_RESULT;
+    QTransform adjoint() const Q_REQUIRED_RESULT;
+    QTransform transposed() const Q_REQUIRED_RESULT;
 
     QTransform &translate(qreal dx, qreal dy);
     QTransform &scale(qreal sx, qreal sy);
diff --git a/src/gui/painting/qvectorpath_p.h b/src/gui/painting/qvectorpath_p.h
index ca95c32597..c005a092e2 100644
--- a/src/gui/painting/qvectorpath_p.h
+++ b/src/gui/painting/qvectorpath_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qabstracttextdocumentlayout.cpp b/src/gui/text/qabstracttextdocumentlayout.cpp
index b8f5aa70a9..48065315ca 100644
--- a/src/gui/text/qabstracttextdocumentlayout.cpp
+++ b/src/gui/text/qabstracttextdocumentlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qabstracttextdocumentlayout.h b/src/gui/text/qabstracttextdocumentlayout.h
index 4bae631b9c..27b3f85dea 100644
--- a/src/gui/text/qabstracttextdocumentlayout.h
+++ b/src/gui/text/qabstracttextdocumentlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qabstracttextdocumentlayout_p.h b/src/gui/text/qabstracttextdocumentlayout_p.h
index 235d06e3b6..575f683da3 100644
--- a/src/gui/text/qabstracttextdocumentlayout_p.h
+++ b/src/gui/text/qabstracttextdocumentlayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qcssparser.cpp b/src/gui/text/qcssparser.cpp
index edf10169b1..8c2e40f319 100644
--- a/src/gui/text/qcssparser.cpp
+++ b/src/gui/text/qcssparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qcssparser_p.h b/src/gui/text/qcssparser_p.h
index 123a53c5cc..4738b0f584 100644
--- a/src/gui/text/qcssparser_p.h
+++ b/src/gui/text/qcssparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qcssscanner.cpp b/src/gui/text/qcssscanner.cpp
index 0cc5536a9f..a7e24724d1 100644
--- a/src/gui/text/qcssscanner.cpp
+++ b/src/gui/text/qcssscanner.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qdistancefield.cpp b/src/gui/text/qdistancefield.cpp
index 17116ee2d0..ca6cafb13c 100644
--- a/src/gui/text/qdistancefield.cpp
+++ b/src/gui/text/qdistancefield.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDeclarative module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qdistancefield_p.h b/src/gui/text/qdistancefield_p.h
index 5c8f5e5808..89eea0f6af 100644
--- a/src/gui/text/qdistancefield_p.h
+++ b/src/gui/text/qdistancefield_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDeclarative module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfont.cpp b/src/gui/text/qfont.cpp
index cf40dd028d..9caebc6ec6 100644
--- a/src/gui/text/qfont.cpp
+++ b/src/gui/text/qfont.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,6 +54,8 @@
 #include <limits.h>
 
 #include <qpa/qplatformscreen.h>
+#include <qpa/qplatformintegration.h>
+#include <qpa/qplatformfontdatabase.h>
 #include <QtGui/private/qguiapplication_p.h>
 
 #include <QtCore/QMutexLocker>
@@ -545,79 +539,6 @@ QFontEngineData::~QFontEngineData()
 */
 
 /*!
-    \fn QString QFont::rawName() const
-    \deprecated
-
-    Returns the name of the font within the underlying window system.
-
-    On X11, this function will return an empty string.
-
-    Using the return value of this function is usually \e not \e
-    portable.
-
-    \sa setRawName()
-*/
-
-/*!
-    \fn void QFont::setRawName(const QString &name)
-    \deprecated
-
-    Sets a font by its system specific name.
-
-    A font set with setRawName() is still a full-featured QFont. It can
-    be queried (for example with italic()) or modified (for example with
-    setItalic()) and is therefore also suitable for rendering rich text.
-
-    If Qt's internal font database cannot resolve the raw name, the
-    font becomes a raw font with \a name as its family.
-
-    \sa rawName(), setRawMode(), setFamily()
-*/
-
-/*!
-    \fn QString QFont::lastResortFamily() const
-
-    Returns the "last resort" font family name.
-
-    The current implementation tries a wide variety of common fonts,
-    returning the first one it finds. Is is possible that no family is
-    found in which case an empty string is returned.
-
-    \sa lastResortFont()
-*/
-
-/*!
-    \fn QString QFont::defaultFamily() const
-
-    Returns the family name that corresponds to the current style
-    hint.
-
-    \sa StyleHint, styleHint(), setStyleHint()
-*/
-
-/*!
-    \fn QString QFont::lastResortFont() const
-
-    Returns a "last resort" font name for the font matching algorithm.
-    This is used if the last resort family is not available. It will
-    always return a name, if necessary returning something like
-    "fixed" or "system".
-
-    The current implementation tries a wide variety of common fonts,
-    returning the first one it finds. The implementation may change
-    at any time, but this function will always return a string
-    containing something.
-
-    It is theoretically possible that there really isn't a
-    lastResortFont() in which case Qt will abort with an error
-    message. We have not been able to identify a case where this
-    happens. Please \l{bughowto.html}{report it as a bug} if
-    it does, preferably with a list of the fonts you have installed.
-
-    \sa lastResortFamily(), rawName()
-*/
-
-/*!
   Constructs a font from \a font for use on the paint device \a pd.
 */
 QFont::QFont(const QFont &font, QPaintDevice *pd)
@@ -1376,6 +1297,7 @@ QFont::StyleHint QFont::styleHint() const
     \value PreferOutline prefers outline fonts (as opposed to bitmap fonts).
     \value ForceOutline forces the use of outline fonts.
     \value NoAntialias don't antialias the fonts.
+    \value NoSubpixelAntialias avoid subpixel antialiasing on the fonts if possible.
     \value PreferAntialias antialias if possible.
     \value OpenGLCompatible forces the use of OpenGL compatible
            fonts.
@@ -1913,20 +1835,6 @@ void QFont::insertSubstitutions(const QString &familyName,
     }
 }
 
-/*! \fn void QFont::initialize()
-  \internal
-
-  Internal function that initializes the font system.  The font cache
-  and font dict do not alloc the keys. The key is a QString which is
-  shared between QFontPrivate and QXFontName.
-*/
-
-/*! \fn void QFont::cleanup()
-  \internal
-
-  Internal function that cleans up the font system.
-*/
-
 /*!
     Removes all the substitutions for \a familyName.
 
@@ -2041,6 +1949,42 @@ static void set_extended_font_bits(quint8 bits, QFontPrivate *f)
 }
 #endif
 
+/*!
+    \fn QString QFont::rawName() const
+    \deprecated
+
+    Returns the name of the font within the underlying window system.
+
+    On X11, this function will return an empty string.
+
+    Using the return value of this function is usually \e not \e
+    portable.
+
+    \sa setRawName()
+*/
+QString QFont::rawName() const
+{
+    return QLatin1String("unknown");
+}
+
+/*!
+    \fn void QFont::setRawName(const QString &name)
+    \deprecated
+
+    Sets a font by its system specific name.
+
+    A font set with setRawName() is still a full-featured QFont. It can
+    be queried (for example with italic()) or modified (for example with
+    setItalic()) and is therefore also suitable for rendering rich text.
+
+    If Qt's internal font database cannot resolve the raw name, the
+    font becomes a raw font with \a name as its family.
+
+    \sa rawName(), setRawMode(), setFamily()
+*/
+void QFont::setRawName(const QString &)
+{
+}
 
 /*!
     Returns the font's key, a textual representation of a font. It is
@@ -2134,17 +2078,96 @@ bool QFont::fromString(const QString &descrip)
     return true;
 }
 
+/*! \fn void QFont::initialize()
+  \internal
+
+  Internal function that initializes the font system.  The font cache
+  and font dict do not alloc the keys. The key is a QString which is
+  shared between QFontPrivate and QXFontName.
+*/
+void QFont::initialize()
+{
+}
+
+/*! \fn void QFont::cleanup()
+  \internal
+
+  Internal function that cleans up the font system.
+*/
+void QFont::cleanup()
+{
+    QFontCache::cleanup();
+}
+
 /*! \internal
 
   Internal function that dumps font cache statistics.
 */
 void QFont::cacheStatistics()
 {
+}
 
+/*!
+    \fn QString QFont::lastResortFamily() const
 
+    Returns the "last resort" font family name.
+
+    The current implementation tries a wide variety of common fonts,
+    returning the first one it finds. Is is possible that no family is
+    found in which case an empty string is returned.
+
+    \sa lastResortFont()
+*/
+QString QFont::lastResortFamily() const
+{
+    return QString::fromLatin1("helvetica");
 }
 
+/*!
+    \fn QString QFont::defaultFamily() const
+
+    Returns the family name that corresponds to the current style
+    hint.
+
+    \sa StyleHint, styleHint(), setStyleHint()
+*/
+QString QFont::defaultFamily() const
+{
+    QPlatformFontDatabase *fontDB = QGuiApplicationPrivate::platformIntegration()->fontDatabase();
+    const QStringList fallbacks = fontDB->fallbacksForFamily(QString(), QFont::StyleNormal
+                                      , QFont::StyleHint(d->request.styleHint), QChar::Script_Common);
+    if (!fallbacks.isEmpty())
+        return fallbacks.first();
+    return QString();
+}
 
+/*!
+    \fn QString QFont::lastResortFont() const
+
+    Returns a "last resort" font name for the font matching algorithm.
+    This is used if the last resort family is not available. It will
+    always return a name, if necessary returning something like
+    "fixed" or "system".
+
+    The current implementation tries a wide variety of common fonts,
+    returning the first one it finds. The implementation may change
+    at any time, but this function will always return a string
+    containing something.
+
+    It is theoretically possible that there really isn't a
+    lastResortFont() in which case Qt will abort with an error
+    message. We have not been able to identify a case where this
+    happens. Please \l{bughowto.html}{report it as a bug} if
+    it does, preferably with a list of the fonts you have installed.
+
+    \sa lastResortFamily(), rawName()
+*/
+QString QFont::lastResortFont() const
+{
+    qFatal("QFont::lastResortFont: Cannot find any reasonable font");
+    // Shut compiler up
+    return QString();
+}
 
 /*****************************************************************************
   QFont stream functions
@@ -2165,6 +2188,8 @@ QDataStream &operator<<(QDataStream &s, const QFont &font)
         s << font.d->request.family.toLatin1();
     } else {
         s << font.d->request.family;
+        if (s.version() >= QDataStream::Qt_5_4)
+            s << font.d->request.styleName;
     }
 
     if (s.version() >= QDataStream::Qt_4_0) {
@@ -2185,8 +2210,14 @@ QDataStream &operator<<(QDataStream &s, const QFont &font)
     }
 
     s << (quint8) font.d->request.styleHint;
-    if (s.version() >= QDataStream::Qt_3_1)
-        s << (quint8) font.d->request.styleStrategy;
+    if (s.version() >= QDataStream::Qt_3_1) {
+        // Continue writing 8 bits for versions < 5.4 so that we don't write too much,
+        // even though we need 16 to store styleStrategy, so there is some data loss.
+        if (s.version() >= QDataStream::Qt_5_4)
+            s << (quint16) font.d->request.styleStrategy;
+        else
+            s << (quint8) font.d->request.styleStrategy;
+    }
     s << (quint8) 0
       << (quint8) font.d->request.weight
       << get_font_bits(s.version(), font.d.data());
@@ -2198,6 +2229,8 @@ QDataStream &operator<<(QDataStream &s, const QFont &font)
         s << font.d->letterSpacing.value();
         s << font.d->wordSpacing.value();
     }
+    if (s.version() >= QDataStream::Qt_5_4)
+        s << (quint8)font.d->request.hintingPreference;
     return s;
 }
 
@@ -2215,7 +2248,8 @@ QDataStream &operator>>(QDataStream &s, QFont &font)
     font.d = new QFontPrivate;
     font.resolve_mask = QFont::AllPropertiesResolved;
 
-    quint8 styleHint, styleStrategy = QFont::PreferDefault, charSet, weight, bits;
+    quint8 styleHint, charSet, weight, bits;
+    quint16 styleStrategy = QFont::PreferDefault;
 
     if (s.version() == 1) {
         QByteArray fam;
@@ -2223,6 +2257,8 @@ QDataStream &operator>>(QDataStream &s, QFont &font)
         font.d->request.family = QString::fromLatin1(fam);
     } else {
         s >> font.d->request.family;
+        if (s.version() >= QDataStream::Qt_5_4)
+            s >> font.d->request.styleName;
     }
 
     if (s.version() >= QDataStream::Qt_4_0) {
@@ -2242,8 +2278,15 @@ QDataStream &operator>>(QDataStream &s, QFont &font)
         font.d->request.pixelSize = pixelSize;
     }
     s >> styleHint;
-    if (s.version() >= QDataStream::Qt_3_1)
-        s >> styleStrategy;
+    if (s.version() >= QDataStream::Qt_3_1) {
+        if (s.version() >= QDataStream::Qt_5_4) {
+            s >> styleStrategy;
+        } else {
+            quint8 tempStyleStrategy;
+            s >> tempStyleStrategy;
+            styleStrategy = tempStyleStrategy;
+        }
+    }
 
     s >> charSet;
     s >> weight;
@@ -2273,6 +2316,11 @@ QDataStream &operator>>(QDataStream &s, QFont &font)
         s >> value;
         font.d->wordSpacing.setValue(value);
     }
+    if (s.version() >= QDataStream::Qt_5_4) {
+        quint8 value;
+        s >> value;
+        font.d->request.hintingPreference = QFont::HintingPreference(value);
+    }
 
     return s;
 }
diff --git a/src/gui/text/qfont.h b/src/gui/text/qfont.h
index 7fbaf24861..2a84fa680d 100644
--- a/src/gui/text/qfont.h
+++ b/src/gui/text/qfont.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -83,6 +75,7 @@ public:
         NoAntialias         = 0x0100,
         OpenGLCompatible    = 0x0200,
         ForceIntegerMetrics = 0x0400,
+        NoSubpixelAntialias = 0x0800,
         NoFontMerging       = 0x8000
     };
 
diff --git a/src/gui/text/qfont_p.h b/src/gui/text/qfont_p.h
index 4d8712e76e..0d5223821a 100644
--- a/src/gui/text/qfont_p.h
+++ b/src/gui/text/qfont_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -92,7 +84,7 @@ struct QFontDef
     uint weight     :  7; // 0-99
     uint fixedPitch :  1;
     uint style      :  2;
-    uint stretch    : 12; // 0-400
+    uint stretch    : 12; // 0-4000
 
     uint hintingPreference : 2;
     uint ignorePitch : 1;
diff --git a/src/gui/text/qfont_qpa.cpp b/src/gui/text/qfont_qpa.cpp
deleted file mode 100644
index be432dc52f..0000000000
--- a/src/gui/text/qfont_qpa.cpp
+++ /dev/null
@@ -1,95 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QtGui/private/qguiapplication_p.h>
-#include <qpa/qplatformintegration.h>
-#include <qpa/qplatformfontdatabase.h>
-
-QT_BEGIN_NAMESPACE
-
-void QFont::initialize()
-{
-}
-
-void QFont::cleanup()
-{
-    QFontCache::cleanup();
-}
-
-
-/*****************************************************************************
-  QFont member functions
- *****************************************************************************/
-
-QString QFont::rawName() const
-{
-    return QLatin1String("unknown");
-}
-
-void QFont::setRawName(const QString &)
-{
-}
-
-QString QFont::defaultFamily() const
-{
-    QPlatformFontDatabase *fontDB = QGuiApplicationPrivate::platformIntegration()->fontDatabase();
-    const QStringList fallbacks = fontDB->fallbacksForFamily(QString(), QFont::StyleNormal
-                                      , QFont::StyleHint(d->request.styleHint), QChar::Script_Common);
-    if (!fallbacks.isEmpty())
-        return fallbacks.first();
-    return QString();
-}
-
-QString QFont::lastResortFamily() const
-{
-    return QString::fromLatin1("helvetica");
-}
-
-QString QFont::lastResortFont() const
-{
-    qFatal("QFont::lastResortFont: Cannot find any reasonable font");
-    // Shut compiler up
-    return QString();
-}
-
-
-QT_END_NAMESPACE
-
diff --git a/src/gui/text/qfontdatabase.cpp b/src/gui/text/qfontdatabase.cpp
index c3be9da2f7..06d6ec125e 100644
--- a/src/gui/text/qfontdatabase.cpp
+++ b/src/gui/text/qfontdatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontdatabase.h b/src/gui/text/qfontdatabase.h
index 833e574707..f1c479d0bb 100644
--- a/src/gui/text/qfontdatabase.h
+++ b/src/gui/text/qfontdatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -167,7 +159,7 @@ private:
     friend class QFontPrivate;
     friend class QFontDialog;
     friend class QFontDialogPrivate;
-    friend class QFontEngineMultiQPA;
+    friend class QFontEngineMultiBasicImpl;
 
     QFontDatabasePrivate *d;
 };
diff --git a/src/gui/text/qfontengine.cpp b/src/gui/text/qfontengine.cpp
index 8adbb31a55..6a34a4c117 100644
--- a/src/gui/text/qfontengine.cpp
+++ b/src/gui/text/qfontengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,10 @@
 #include <qdebug.h>
 #include <private/qfontengine_p.h>
 #include <private/qfontengineglyphcache_p.h>
+#include <private/qguiapplication_p.h>
+
+#include <qpa/qplatformfontdatabase.h>
+#include <qpa/qplatformintegration.h>
 
 #include "qbitmap.h"
 #include "qpainter.h"
@@ -370,7 +366,7 @@ bool QFontEngine::supportsScript(QChar::Script script) const
             hb_tag_t script_tag_1, script_tag_2;
             hb_ot_tags_from_script(hb_qt_script_to_script(script), &script_tag_1, &script_tag_2);
 
-            unsigned int script_index = -1;
+            unsigned int script_index;
             ret = hb_ot_layout_table_find_script(face, HB_OT_TAG_GSUB, script_tag_1, &script_index);
             if (!ret) {
                 ret = hb_ot_layout_table_find_script(face, HB_OT_TAG_GSUB, script_tag_2, &script_index);
@@ -2000,4 +1996,115 @@ QImage QFontEngineMulti::alphaRGBMapForGlyph(glyph_t glyph, QFixed subPixelPosit
     return engine(which)->alphaRGBMapForGlyph(stripped(glyph), subPixelPosition, t);
 }
 
+/*
+    Creates a new multi engine.
+
+    This function takes ownership of the QFontEngine, increasing it's refcount.
+*/
+QFontEngineMultiBasicImpl::QFontEngineMultiBasicImpl(QFontEngine *fe, int _script, const QStringList &fallbacks)
+    : QFontEngineMulti(fallbacks.size() + 1),
+      fallbackFamilies(fallbacks), script(_script)
+    , fallbacksQueried(true)
+{
+    init(fe);
+}
+
+QFontEngineMultiBasicImpl::QFontEngineMultiBasicImpl(QFontEngine *fe, int _script)
+    : QFontEngineMulti(2)
+    , script(_script)
+    , fallbacksQueried(false)
+{
+    fallbackFamilies << QString();
+    init(fe);
+}
+
+void QFontEngineMultiBasicImpl::init(QFontEngine *fe)
+{
+    Q_ASSERT(fe && fe->type() != QFontEngine::Multi);
+    engines[0] = fe;
+    fe->ref.ref();
+    fontDef = engines[0]->fontDef;
+    cache_cost = fe->cache_cost;
+}
+
+void QFontEngineMultiBasicImpl::loadEngine(int at)
+{
+    ensureFallbackFamiliesQueried();
+    Q_ASSERT(at < engines.size());
+    Q_ASSERT(engines.at(at) == 0);
+    QFontDef request = fontDef;
+    request.styleStrategy |= QFont::NoFontMerging;
+    request.family = fallbackFamilies.at(at-1);
+    engines[at] = QFontDatabase::findFont(script,
+                                          /*fontprivate = */0,
+                                          request, /*multi = */false, true);
+    Q_ASSERT(engines[at]);
+    engines[at]->ref.ref();
+    engines[at]->fontDef = request;
+}
+void QFontEngineMultiBasicImpl::ensureFallbackFamiliesQueried()
+{
+    if (fallbacksQueried)
+        return;
+    QStringList fallbacks = QGuiApplicationPrivate::instance()->platformIntegration()->fontDatabase()->fallbacksForFamily(engine(0)->fontDef.family, QFont::Style(engine(0)->fontDef.style)
+                                                                                                                          , QFont::AnyStyle, QChar::Script(script));
+    setFallbackFamiliesList(fallbacks);
+}
+
+void QFontEngineMultiBasicImpl::setFallbackFamiliesList(const QStringList &fallbacks)
+{
+    // Original FontEngine to restore after the fill.
+    QFontEngine *fe = engines[0];
+    fallbackFamilies = fallbacks;
+    if (!fallbackFamilies.isEmpty()) {
+        engines.fill(0, fallbackFamilies.size() + 1);
+        engines[0] = fe;
+    } else {
+        // Turns out we lied about having any fallback at all.
+        fallbackFamilies << fe->fontDef.family;
+        engines[1] = fe;
+        fe->ref.ref();
+    }
+    fallbacksQueried = true;
+}
+
+/*
+  This is used indirectly by Qt WebKit when using QTextLayout::setRawFont
+
+  The purpose of this is to provide the necessary font fallbacks when drawing complex
+  text. Since Qt WebKit ends up repeatedly creating QTextLayout instances and passing them
+  the same raw font over and over again, we want to cache the corresponding multi font engine
+  as it may contain fallback font engines already.
+*/
+QFontEngine* QFontEngineMultiBasicImpl::createMultiFontEngine(QFontEngine *fe, int script)
+{
+    QFontEngine *engine = 0;
+    QFontCache::Key key(fe->fontDef, script, /*multi = */true);
+    QFontCache *fc = QFontCache::instance();
+    //  We can't rely on the fontDef (and hence the cache Key)
+    //  alone to distinguish webfonts, since these should not be
+    //  accidentally shared, even if the resulting fontcache key
+    //  is strictly identical. See:
+    //   http://www.w3.org/TR/css3-fonts/#font-face-rule
+    const bool faceIsLocal = !fe->faceId().filename.isEmpty();
+    QFontCache::EngineCache::Iterator it = fc->engineCache.find(key),
+            end = fc->engineCache.end();
+    while (it != end && it.key() == key) {
+        Q_ASSERT(it.value().data->type() == QFontEngine::Multi);
+        QFontEngineMulti *cachedEngine = static_cast<QFontEngineMulti *>(it.value().data);
+        if (fe == cachedEngine->engine(0) || (faceIsLocal && fe->faceId().filename == cachedEngine->engine(0)->faceId().filename)) {
+            engine = cachedEngine;
+            fc->updateHitCountAndTimeStamp(it.value());
+            break;
+        }
+        it++;
+    }
+    if (!engine) {
+        engine = QGuiApplicationPrivate::instance()->platformIntegration()->fontDatabase()->fontEngineMulti(fe, QChar::Script(script));
+        QFontCache::instance()->insertEngine(key, engine, /* insertMulti */ !faceIsLocal);
+    }
+    Q_ASSERT(engine);
+    return engine;
+}
+
 QT_END_NAMESPACE
diff --git a/src/gui/text/qfontengine_ft.cpp b/src/gui/text/qfontengine_ft.cpp
index f5ca559d62..6dd8585483 100644
--- a/src/gui/text/qfontengine_ft.cpp
+++ b/src/gui/text/qfontengine_ft.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -132,6 +124,7 @@ static bool ft_getSfntTable(void *user_data, uint tag, uchar *buffer, uint *leng
     return result;
 }
 
+static QFontEngineFT::Glyph emptyGlyph = {0, 0, 0, 0, 0, 0, 0, 0};
 
 // -------------------------- Freetype support ------------------------------
 
@@ -678,6 +671,7 @@ QFontEngineFT::QFontEngineFT(const QFontDef &fd)
     const QByteArray env = qgetenv("QT_NO_FT_CACHE");
     cacheEnabled = env.isEmpty() || env.toInt() == 0;
     m_subPixelPositionCount = 4;
+    forceAutoHint = false;
 }
 
 QFontEngineFT::~QFontEngineFT()
@@ -813,11 +807,11 @@ int QFontEngineFT::loadFlags(QGlyphSet *set, GlyphFormat format, int flags,
     if (format == Format_Mono) {
         load_target = FT_LOAD_TARGET_MONO;
     } else if (format == Format_A32) {
-        if (subpixelType == QFontEngineFT::Subpixel_RGB || subpixelType == QFontEngineFT::Subpixel_BGR) {
+        if (subpixelType == Subpixel_RGB || subpixelType == Subpixel_BGR) {
             if (default_hint_style == HintFull)
                 load_target = FT_LOAD_TARGET_LCD;
             hsubpixel = true;
-        } else if (subpixelType == QFontEngineFT::Subpixel_VRGB || subpixelType == QFontEngineFT::Subpixel_VBGR) {
+        } else if (subpixelType == Subpixel_VRGB || subpixelType == Subpixel_VBGR) {
             if (default_hint_style == HintFull)
                 load_target = FT_LOAD_TARGET_LCD_V;
             vfactor = 3;
@@ -825,13 +819,16 @@ int QFontEngineFT::loadFlags(QGlyphSet *set, GlyphFormat format, int flags,
     }
 
     if (set && set->outline_drawing)
-        load_flags = FT_LOAD_NO_BITMAP;
+        load_flags |= FT_LOAD_NO_BITMAP;
 
     if (default_hint_style == HintNone || (flags & DesignMetrics) || (set && set->outline_drawing))
         load_flags |= FT_LOAD_NO_HINTING;
     else
         load_flags |= load_target;
 
+    if (forceAutoHint)
+        load_flags |= FT_LOAD_FORCE_AUTOHINT;
+
     return load_flags;
 }
 
@@ -854,6 +851,9 @@ QFontEngineFT::Glyph *QFontEngineFT::loadGlyph(QGlyphSet *set, uint glyph,
     if (g && g->format == format && (fetchMetricsOnly || g->data))
         return g;
 
+    if (!g && set && set->isGlyphMissing(glyph))
+        return &emptyGlyph;
+
     QFontEngineFT::GlyphInfo info;
 
     Q_ASSERT(format != Format_None);
@@ -890,8 +890,12 @@ QFontEngineFT::Glyph *QFontEngineFT::loadGlyph(QGlyphSet *set, uint glyph,
         load_flags |= FT_LOAD_FORCE_AUTOHINT;
         err = FT_Load_Glyph(face, glyph, load_flags);
     }
-    if (err != FT_Err_Ok)
+    if (err != FT_Err_Ok) {
         qWarning("load glyph failed err=%x face=%p, glyph=%d", err, face, glyph);
+        if (set)
+            set->setGlyphMissing(glyph);
+        return &emptyGlyph;
+    }
 
     FT_GlyphSlot slot = face->glyph;
 
@@ -977,9 +981,9 @@ QFontEngineFT::Glyph *QFontEngineFT::loadGlyph(QGlyphSet *set, uint glyph,
         glyph_buffer = new uchar[glyph_buffer_size];
 
         if (hsubpixel)
-            convertRGBToARGB(slot->bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, slot->bitmap.pitch, subpixelType != QFontEngineFT::Subpixel_RGB, false);
+            convertRGBToARGB(slot->bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, slot->bitmap.pitch, subpixelType != Subpixel_RGB, false);
         else if (vfactor != 1)
-            convertRGBToARGB_V(slot->bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, slot->bitmap.pitch, subpixelType != QFontEngineFT::Subpixel_VRGB, false);
+            convertRGBToARGB_V(slot->bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, slot->bitmap.pitch, subpixelType != Subpixel_VRGB, false);
     } else
 #endif
     {
@@ -1091,10 +1095,10 @@ QFontEngineFT::Glyph *QFontEngineFT::loadGlyph(QGlyphSet *set, uint glyph,
                 convoluteBitmap(bitmap.buffer, convoluted, bitmap.width, info.height, bitmap.pitch);
                 buffer = convoluted;
             }
-            convertRGBToARGB(buffer + 1, (uint *)glyph_buffer, info.width, info.height, bitmap.pitch, subpixelType != QFontEngineFT::Subpixel_RGB, useLegacyLcdFilter);
+            convertRGBToARGB(buffer + 1, (uint *)glyph_buffer, info.width, info.height, bitmap.pitch, subpixelType != Subpixel_RGB, useLegacyLcdFilter);
             delete [] convoluted;
         } else if (vfactor != 1) {
-            convertRGBToARGB_V(bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, bitmap.pitch, subpixelType != QFontEngineFT::Subpixel_VRGB, true);
+            convertRGBToARGB_V(bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, bitmap.pitch, subpixelType != Subpixel_VRGB, true);
         } else if (format == Format_A32 && bitmap.pixel_mode == FT_PIXEL_MODE_GRAY) {
             convertGRAYToARGB(bitmap.buffer, (uint *)glyph_buffer, info.width, info.height, bitmap.pitch);
         }
@@ -1629,9 +1633,12 @@ void QFontEngineFT::recalcAdvances(QGlyphLayout *glyphs, QFontEngine::ShaperFlag
             if (!face)
                 face = lockFace();
             g = loadGlyph(cacheEnabled ? &defaultGlyphSet : 0, glyphs->glyphs[i], 0, Format_None, true);
-            glyphs->advances[i] = design ? QFixed::fromFixed(face->glyph->linearHoriAdvance >> 10)
-                                         : QFixed::fromFixed(face->glyph->metrics.horiAdvance).round();
-            if (!cacheEnabled)
+            if (g)
+                glyphs->advances[i] = design ? QFixed::fromFixed(g->linearAdvance) : QFixed(g->advance);
+            else
+                glyphs->advances[i] = design ? QFixed::fromFixed(face->glyph->linearHoriAdvance >> 10)
+                                             : QFixed::fromFixed(face->glyph->metrics.horiAdvance).round();
+            if (!cacheEnabled && g != &emptyGlyph)
                 delete g;
         }
     }
@@ -1670,7 +1677,7 @@ glyph_metrics_t QFontEngineFT::boundingBox(const QGlyphLayout &glyphs)
             xmax = qMax(xmax, x + g->width);
             ymax = qMax(ymax, y + g->height);
             overall.xoff += g->advance;
-            if (!cacheEnabled)
+            if (!cacheEnabled && g != &emptyGlyph)
                 delete g;
         } else {
             int left  = FLOOR(face->glyph->metrics.horiBearingX);
@@ -1713,7 +1720,7 @@ glyph_metrics_t QFontEngineFT::boundingBox(glyph_t glyph)
         overall.xoff = g->advance;
         if (fontDef.styleStrategy & QFont::ForceIntegerMetrics)
             overall.xoff = overall.xoff.round();
-        if (!cacheEnabled)
+        if (!cacheEnabled && g != &emptyGlyph)
             delete g;
     } else {
         int left  = FLOOR(face->glyph->metrics.horiBearingX);
@@ -1804,7 +1811,7 @@ glyph_metrics_t QFontEngineFT::alphaMapBoundingBox(glyph_t glyph, QFixed subPixe
         overall.width = g->width;
         overall.height = g->height;
         overall.xoff = g->advance;
-        if (!glyphSet)
+        if (!glyphSet && g != &emptyGlyph)
             delete g;
     } else {
         int left  = FLOOR(face->glyph->metrics.horiBearingX);
diff --git a/src/gui/text/qfontengine_ft_p.h b/src/gui/text/qfontengine_ft_p.h
index 8bdf991174..a73c281f1d 100644
--- a/src/gui/text/qfontengine_ft_p.h
+++ b/src/gui/text/qfontengine_ft_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -150,14 +142,6 @@ public:
         uchar *data;
     };
 
-    enum SubpixelAntialiasingType {
-        Subpixel_None,
-        Subpixel_RGB,
-        Subpixel_BGR,
-        Subpixel_VRGB,
-        Subpixel_VBGR
-    };
-
     struct GlyphInfo {
         unsigned short  width;
         unsigned short  height;
@@ -195,8 +179,11 @@ public:
         inline Glyph *getGlyph(glyph_t index, QFixed subPixelPosition = 0) const;
         void setGlyph(glyph_t index, QFixed spp, Glyph *glyph);
 
+        inline bool isGlyphMissing(glyph_t index) const { return missing_glyphs.contains(index); }
+        inline void setGlyphMissing(glyph_t index) const { missing_glyphs.insert(index); }
 private:
         mutable QHash<GlyphAndSubPixelPosition, Glyph *> glyph_data; // maps from glyph index to glyph data
+        mutable QSet<glyph_t> missing_glyphs;
         mutable Glyph *fast_glyph_data[256]; // for fast lookup of glyphs < 256
         mutable int fast_glyph_count;
     };
@@ -315,6 +302,7 @@ protected:
     int lcdFilterType;
     bool embeddedbitmap;
     bool cacheEnabled;
+    bool forceAutoHint;
 
 private:
     friend class QFontEngineFTRawFont;
diff --git a/src/gui/text/qfontengine_p.h b/src/gui/text/qfontengine_p.h
index fc849d788f..8c40189ed2 100644
--- a/src/gui/text/qfontengine_p.h
+++ b/src/gui/text/qfontengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -261,6 +253,14 @@ public:
     };
     virtual void setDefaultHintStyle(HintStyle) { }
 
+    enum SubpixelAntialiasingType {
+        Subpixel_None,
+        Subpixel_RGB,
+        Subpixel_BGR,
+        Subpixel_VRGB,
+        Subpixel_VBGR
+    };
+
 private:
     const Type m_type;
 
@@ -433,6 +433,29 @@ protected:
     QVector<QFontEngine *> engines;
 };
 
+class Q_GUI_EXPORT QFontEngineMultiBasicImpl : public QFontEngineMulti
+{
+public:
+    QFontEngineMultiBasicImpl(QFontEngine *fe, int script, const QStringList &fallbacks);
+    QFontEngineMultiBasicImpl(QFontEngine *fe, int script);
+
+    void loadEngine(int at);
+    static QFontEngine* createMultiFontEngine(QFontEngine *fe, int script);
+
+    int fallbackFamilyCount() const { return fallbackFamilies.size(); }
+    QString fallbackFamilyAt(int at) const { return fallbackFamilies.at(at); }
+
+    virtual void ensureFallbackFamiliesQueried();
+    virtual void setFallbackFamiliesList(const QStringList &fallbacks);
+
+private:
+    void init(QFontEngine *fe);
+
+    mutable QStringList fallbackFamilies;
+    int script;
+    mutable bool fallbacksQueried;
+};
+
 class QTestFontEngine : public QFontEngineBox
 {
 public:
diff --git a/src/gui/text/qfontengine_qpa.cpp b/src/gui/text/qfontengine_qpf2.cpp
index a115d2a901..4785902c99 100644
--- a/src/gui/text/qfontengine_qpa.cpp
+++ b/src/gui/text/qfontengine_qpf2.cpp
@@ -1,45 +1,37 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-#include "qfontengine_qpa_p.h"
+#include "qfontengine_qpf2_p.h"
 
 #include <QtCore/QFile>
 #include <QtCore/QFileInfo>
@@ -57,28 +49,28 @@ QT_BEGIN_NAMESPACE
 //#define DEBUG_HEADER
 //#define DEBUG_FONTENGINE
 
-static QFontEngineQPA::TagType tagTypes[QFontEngineQPA::NumTags] = {
-    QFontEngineQPA::StringType, // FontName
-    QFontEngineQPA::StringType, // FileName
-    QFontEngineQPA::UInt32Type, // FileIndex
-    QFontEngineQPA::UInt32Type, // FontRevision
-    QFontEngineQPA::StringType, // FreeText
-    QFontEngineQPA::FixedType,  // Ascent
-    QFontEngineQPA::FixedType,  // Descent
-    QFontEngineQPA::FixedType,  // Leading
-    QFontEngineQPA::FixedType,  // XHeight
-    QFontEngineQPA::FixedType,  // AverageCharWidth
-    QFontEngineQPA::FixedType,  // MaxCharWidth
-    QFontEngineQPA::FixedType,  // LineThickness
-    QFontEngineQPA::FixedType,  // MinLeftBearing
-    QFontEngineQPA::FixedType,  // MinRightBearing
-    QFontEngineQPA::FixedType,  // UnderlinePosition
-    QFontEngineQPA::UInt8Type,  // GlyphFormat
-    QFontEngineQPA::UInt8Type,  // PixelSize
-    QFontEngineQPA::UInt8Type,  // Weight
-    QFontEngineQPA::UInt8Type,  // Style
-    QFontEngineQPA::StringType, // EndOfHeader
-    QFontEngineQPA::BitFieldType// WritingSystems
+static QFontEngineQPF2::TagType tagTypes[QFontEngineQPF2::NumTags] = {
+    QFontEngineQPF2::StringType, // FontName
+    QFontEngineQPF2::StringType, // FileName
+    QFontEngineQPF2::UInt32Type, // FileIndex
+    QFontEngineQPF2::UInt32Type, // FontRevision
+    QFontEngineQPF2::StringType, // FreeText
+    QFontEngineQPF2::FixedType,  // Ascent
+    QFontEngineQPF2::FixedType,  // Descent
+    QFontEngineQPF2::FixedType,  // Leading
+    QFontEngineQPF2::FixedType,  // XHeight
+    QFontEngineQPF2::FixedType,  // AverageCharWidth
+    QFontEngineQPF2::FixedType,  // MaxCharWidth
+    QFontEngineQPF2::FixedType,  // LineThickness
+    QFontEngineQPF2::FixedType,  // MinLeftBearing
+    QFontEngineQPF2::FixedType,  // MinRightBearing
+    QFontEngineQPF2::FixedType,  // UnderlinePosition
+    QFontEngineQPF2::UInt8Type,  // GlyphFormat
+    QFontEngineQPF2::UInt8Type,  // PixelSize
+    QFontEngineQPF2::UInt8Type,  // Weight
+    QFontEngineQPF2::UInt8Type,  // Style
+    QFontEngineQPF2::StringType, // EndOfHeader
+    QFontEngineQPF2::BitFieldType// WritingSystems
 };
 
 
@@ -122,21 +114,21 @@ static inline const uchar *verifyTag(const uchar *tagPtr, const uchar *endPtr)
     quint16 tag, length;
     READ_VERIFY(quint16, tag);
     READ_VERIFY(quint16, length);
-    if (tag == QFontEngineQPA::Tag_EndOfHeader)
+    if (tag == QFontEngineQPF2::Tag_EndOfHeader)
         return endPtr;
-    if (tag < QFontEngineQPA::NumTags) {
+    if (tag < QFontEngineQPF2::NumTags) {
         switch (tagTypes[tag]) {
-            case QFontEngineQPA::BitFieldType:
-            case QFontEngineQPA::StringType:
+            case QFontEngineQPF2::BitFieldType:
+            case QFontEngineQPF2::StringType:
                 // can't do anything...
                 break;
-            case QFontEngineQPA::UInt32Type:
+            case QFontEngineQPF2::UInt32Type:
                 VERIFY_TAG(length == sizeof(quint32));
                 break;
-            case QFontEngineQPA::FixedType:
+            case QFontEngineQPF2::FixedType:
                 VERIFY_TAG(length == sizeof(quint32));
                 break;
-            case QFontEngineQPA::UInt8Type:
+            case QFontEngineQPF2::UInt8Type:
                 VERIFY_TAG(length == sizeof(quint8));
                 break;
         }
@@ -150,7 +142,7 @@ static inline const uchar *verifyTag(const uchar *tagPtr, const uchar *endPtr)
     return tagPtr + length;
 }
 
-const QFontEngineQPA::Glyph *QFontEngineQPA::findGlyph(glyph_t g) const
+const QFontEngineQPF2::Glyph *QFontEngineQPF2::findGlyph(glyph_t g) const
 {
     if (!g || g >= glyphMapEntries)
         return 0;
@@ -168,7 +160,7 @@ const QFontEngineQPA::Glyph *QFontEngineQPA::findGlyph(glyph_t g) const
     return reinterpret_cast<const Glyph *>(fontData + glyphDataOffset + glyphPos);
 }
 
-bool QFontEngineQPA::verifyHeader(const uchar *data, int size)
+bool QFontEngineQPF2::verifyHeader(const uchar *data, int size)
 {
     VERIFY(quintptr(data) % Q_ALIGNOF(Header) == 0);
     VERIFY(size >= int(sizeof(Header)));
@@ -194,7 +186,7 @@ bool QFontEngineQPA::verifyHeader(const uchar *data, int size)
     return true;
 }
 
-QVariant QFontEngineQPA::extractHeaderField(const uchar *data, HeaderTag requestedTag)
+QVariant QFontEngineQPF2::extractHeaderField(const uchar *data, HeaderTag requestedTag)
 {
     const Header *header = reinterpret_cast<const Header *>(data);
     const uchar *tagPtr = data + sizeof(Header);
@@ -226,7 +218,7 @@ QVariant QFontEngineQPA::extractHeaderField(const uchar *data, HeaderTag request
 }
 
 
-QFontEngineQPA::QFontEngineQPA(const QFontDef &def, const QByteArray &data)
+QFontEngineQPF2::QFontEngineQPF2(const QFontDef &def, const QByteArray &data)
     : QFontEngine(QPF2),
       fontData(reinterpret_cast<const uchar *>(data.constData())), dataSize(data.size())
 {
@@ -243,7 +235,7 @@ QFontEngineQPA::QFontEngineQPA(const QFontDef &def, const QByteArray &data)
     readOnly = true;
 
 #if defined(DEBUG_FONTENGINE)
-    qDebug() << "QFontEngineQPA::QFontEngineQPA( fd =" << fd << ", renderingFontEngine =" << renderingFontEngine << ')';
+    qDebug() << "QFontEngineQPF2::QFontEngineQPF2( fd =" << fd << ", renderingFontEngine =" << renderingFontEngine << ')';
 #endif
 
     if (!verifyHeader(fontData, dataSize)) {
@@ -312,11 +304,11 @@ QFontEngineQPA::QFontEngineQPA(const QFontDef &def, const QByteArray &data)
 #endif
 }
 
-QFontEngineQPA::~QFontEngineQPA()
+QFontEngineQPF2::~QFontEngineQPF2()
 {
 }
 
-bool QFontEngineQPA::getSfntTableData(uint tag, uchar *buffer, uint *length) const
+bool QFontEngineQPF2::getSfntTableData(uint tag, uchar *buffer, uint *length) const
 {
     if (tag != MAKE_TAG('c', 'm', 'a', 'p') || !cmap)
         return false;
@@ -328,7 +320,7 @@ bool QFontEngineQPA::getSfntTableData(uint tag, uchar *buffer, uint *length) con
     return true;
 }
 
-glyph_t QFontEngineQPA::glyphIndex(uint ucs4) const
+glyph_t QFontEngineQPF2::glyphIndex(uint ucs4) const
 {
     glyph_t glyph = getTrueTypeGlyphIndex(cmap, ucs4);
     if (glyph == 0 && symbol && ucs4 < 0x100)
@@ -339,7 +331,7 @@ glyph_t QFontEngineQPA::glyphIndex(uint ucs4) const
     return glyph;
 }
 
-bool QFontEngineQPA::stringToCMap(const QChar *str, int len, QGlyphLayout *glyphs, int *nglyphs, QFontEngine::ShaperFlags flags) const
+bool QFontEngineQPF2::stringToCMap(const QChar *str, int len, QGlyphLayout *glyphs, int *nglyphs, QFontEngine::ShaperFlags flags) const
 {
     Q_ASSERT(glyphs->numGlyphs >= *nglyphs);
     if (*nglyphs < len) {
@@ -386,7 +378,7 @@ bool QFontEngineQPA::stringToCMap(const QChar *str, int len, QGlyphLayout *glyph
     return true;
 }
 
-void QFontEngineQPA::recalcAdvances(QGlyphLayout *glyphs, QFontEngine::ShaperFlags) const
+void QFontEngineQPF2::recalcAdvances(QGlyphLayout *glyphs, QFontEngine::ShaperFlags) const
 {
     for (int i = 0; i < glyphs->numGlyphs; ++i) {
         const Glyph *g = findGlyph(glyphs->glyphs[i]);
@@ -396,7 +388,7 @@ void QFontEngineQPA::recalcAdvances(QGlyphLayout *glyphs, QFontEngine::ShaperFla
     }
 }
 
-QImage QFontEngineQPA::alphaMapForGlyph(glyph_t g)
+QImage QFontEngineQPF2::alphaMapForGlyph(glyph_t g)
 {
     const Glyph *glyph = findGlyph(g);
     if (!glyph)
@@ -409,12 +401,12 @@ QImage QFontEngineQPA::alphaMapForGlyph(glyph_t g)
     return image;
 }
 
-void QFontEngineQPA::addOutlineToPath(qreal x, qreal y, const QGlyphLayout &glyphs, QPainterPath *path, QTextItem::RenderFlags flags)
+void QFontEngineQPF2::addOutlineToPath(qreal x, qreal y, const QGlyphLayout &glyphs, QPainterPath *path, QTextItem::RenderFlags flags)
 {
     addBitmapFontToPath(x, y, glyphs, path, flags);
 }
 
-glyph_metrics_t QFontEngineQPA::boundingBox(const QGlyphLayout &glyphs)
+glyph_metrics_t QFontEngineQPF2::boundingBox(const QGlyphLayout &glyphs)
 {
     glyph_metrics_t overall;
     // initialize with line height, we get the same behaviour on all platforms
@@ -442,7 +434,7 @@ glyph_metrics_t QFontEngineQPA::boundingBox(const QGlyphLayout &glyphs)
     return overall;
 }
 
-glyph_metrics_t QFontEngineQPA::boundingBox(glyph_t glyph)
+glyph_metrics_t QFontEngineQPF2::boundingBox(glyph_t glyph)
 {
     glyph_metrics_t overall;
     const Glyph *g = findGlyph(glyph);
@@ -456,107 +448,107 @@ glyph_metrics_t QFontEngineQPA::boundingBox(glyph_t glyph)
     return overall;
 }
 
-QFixed QFontEngineQPA::ascent() const
+QFixed QFontEngineQPF2::ascent() const
 {
     return QFixed::fromReal(extractHeaderField(fontData, Tag_Ascent).value<qreal>());
 }
 
-QFixed QFontEngineQPA::descent() const
+QFixed QFontEngineQPF2::descent() const
 {
     return QFixed::fromReal(extractHeaderField(fontData, Tag_Descent).value<qreal>());
 }
 
-QFixed QFontEngineQPA::leading() const
+QFixed QFontEngineQPF2::leading() const
 {
     return QFixed::fromReal(extractHeaderField(fontData, Tag_Leading).value<qreal>());
 }
 
-qreal QFontEngineQPA::maxCharWidth() const
+qreal QFontEngineQPF2::maxCharWidth() const
 {
     return extractHeaderField(fontData, Tag_MaxCharWidth).value<qreal>();
 }
 
-qreal QFontEngineQPA::minLeftBearing() const
+qreal QFontEngineQPF2::minLeftBearing() const
 {
     return extractHeaderField(fontData, Tag_MinLeftBearing).value<qreal>();
 }
 
-qreal QFontEngineQPA::minRightBearing() const
+qreal QFontEngineQPF2::minRightBearing() const
 {
     return extractHeaderField(fontData, Tag_MinRightBearing).value<qreal>();
 }
 
-QFixed QFontEngineQPA::underlinePosition() const
+QFixed QFontEngineQPF2::underlinePosition() const
 {
     return QFixed::fromReal(extractHeaderField(fontData, Tag_UnderlinePosition).value<qreal>());
 }
 
-QFixed QFontEngineQPA::lineThickness() const
+QFixed QFontEngineQPF2::lineThickness() const
 {
     return QFixed::fromReal(extractHeaderField(fontData, Tag_LineThickness).value<qreal>());
 }
 
-bool QFontEngineQPA::isValid() const
+bool QFontEngineQPF2::isValid() const
 {
     return fontData && dataSize && cmapOffset
            && glyphMapOffset && glyphDataOffset && glyphDataSize > 0;
 }
 
-void QPAGenerator::generate()
+void QPF2Generator::generate()
 {
     writeHeader();
     writeGMap();
-    writeBlock(QFontEngineQPA::GlyphBlock, QByteArray());
+    writeBlock(QFontEngineQPF2::GlyphBlock, QByteArray());
 
     dev->seek(4); // position of header.lock
     writeUInt32(0);
 }
 
-void QPAGenerator::writeHeader()
+void QPF2Generator::writeHeader()
 {
-    QFontEngineQPA::Header header;
+    QFontEngineQPF2::Header header;
 
     header.magic[0] = 'Q';
     header.magic[1] = 'P';
     header.magic[2] = 'F';
     header.magic[3] = '2';
     header.lock = 1;
-    header.majorVersion = QFontEngineQPA::CurrentMajorVersion;
-    header.minorVersion = QFontEngineQPA::CurrentMinorVersion;
+    header.majorVersion = QFontEngineQPF2::CurrentMajorVersion;
+    header.minorVersion = QFontEngineQPF2::CurrentMinorVersion;
     header.dataSize = 0;
     dev->write((const char *)&header, sizeof(header));
 
-    writeTaggedString(QFontEngineQPA::Tag_FontName, fe->fontDef.family.toUtf8());
+    writeTaggedString(QFontEngineQPF2::Tag_FontName, fe->fontDef.family.toUtf8());
 
     QFontEngine::FaceId face = fe->faceId();
-    writeTaggedString(QFontEngineQPA::Tag_FileName, face.filename);
-    writeTaggedUInt32(QFontEngineQPA::Tag_FileIndex, face.index);
+    writeTaggedString(QFontEngineQPF2::Tag_FileName, face.filename);
+    writeTaggedUInt32(QFontEngineQPF2::Tag_FileIndex, face.index);
 
     {
         const QByteArray head = fe->getSfntTable(MAKE_TAG('h', 'e', 'a', 'd'));
         if (head.size() >= 4) {
             const quint32 revision = qFromBigEndian<quint32>(reinterpret_cast<const uchar *>(head.constData()));
-            writeTaggedUInt32(QFontEngineQPA::Tag_FontRevision, revision);
+            writeTaggedUInt32(QFontEngineQPF2::Tag_FontRevision, revision);
         }
     }
 
-    writeTaggedQFixed(QFontEngineQPA::Tag_Ascent, fe->ascent());
-    writeTaggedQFixed(QFontEngineQPA::Tag_Descent, fe->descent());
-    writeTaggedQFixed(QFontEngineQPA::Tag_Leading, fe->leading());
-    writeTaggedQFixed(QFontEngineQPA::Tag_XHeight, fe->xHeight());
-    writeTaggedQFixed(QFontEngineQPA::Tag_AverageCharWidth, fe->averageCharWidth());
-    writeTaggedQFixed(QFontEngineQPA::Tag_MaxCharWidth, QFixed::fromReal(fe->maxCharWidth()));
-    writeTaggedQFixed(QFontEngineQPA::Tag_LineThickness, fe->lineThickness());
-    writeTaggedQFixed(QFontEngineQPA::Tag_MinLeftBearing, QFixed::fromReal(fe->minLeftBearing()));
-    writeTaggedQFixed(QFontEngineQPA::Tag_MinRightBearing, QFixed::fromReal(fe->minRightBearing()));
-    writeTaggedQFixed(QFontEngineQPA::Tag_UnderlinePosition, fe->underlinePosition());
-    writeTaggedUInt8(QFontEngineQPA::Tag_PixelSize, fe->fontDef.pixelSize);
-    writeTaggedUInt8(QFontEngineQPA::Tag_Weight, fe->fontDef.weight);
-    writeTaggedUInt8(QFontEngineQPA::Tag_Style, fe->fontDef.style);
-
-    writeTaggedUInt8(QFontEngineQPA::Tag_GlyphFormat, QFontEngineQPA::AlphamapGlyphs);
-
-    writeTaggedString(QFontEngineQPA::Tag_EndOfHeader, QByteArray());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_Ascent, fe->ascent());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_Descent, fe->descent());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_Leading, fe->leading());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_XHeight, fe->xHeight());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_AverageCharWidth, fe->averageCharWidth());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_MaxCharWidth, QFixed::fromReal(fe->maxCharWidth()));
+    writeTaggedQFixed(QFontEngineQPF2::Tag_LineThickness, fe->lineThickness());
+    writeTaggedQFixed(QFontEngineQPF2::Tag_MinLeftBearing, QFixed::fromReal(fe->minLeftBearing()));
+    writeTaggedQFixed(QFontEngineQPF2::Tag_MinRightBearing, QFixed::fromReal(fe->minRightBearing()));
+    writeTaggedQFixed(QFontEngineQPF2::Tag_UnderlinePosition, fe->underlinePosition());
+    writeTaggedUInt8(QFontEngineQPF2::Tag_PixelSize, fe->fontDef.pixelSize);
+    writeTaggedUInt8(QFontEngineQPF2::Tag_Weight, fe->fontDef.weight);
+    writeTaggedUInt8(QFontEngineQPF2::Tag_Style, fe->fontDef.style);
+
+    writeTaggedUInt8(QFontEngineQPF2::Tag_GlyphFormat, QFontEngineQPF2::AlphamapGlyphs);
+
+    writeTaggedString(QFontEngineQPF2::Tag_EndOfHeader, QByteArray());
     align4();
 
     const quint64 size = dev->pos();
@@ -566,11 +558,11 @@ void QPAGenerator::writeHeader()
     dev->seek(size);
 }
 
-void QPAGenerator::writeGMap()
+void QPF2Generator::writeGMap()
 {
     const quint16 glyphCount = fe->glyphCount();
 
-    writeUInt16(QFontEngineQPA::GMapBlock);
+    writeUInt16(QFontEngineQPF2::GMapBlock);
     writeUInt16(0); // padding
     writeUInt32(glyphCount * 4);
 
@@ -582,7 +574,7 @@ void QPAGenerator::writeGMap()
     dev->seek(pos + numBytes);
 }
 
-void QPAGenerator::writeBlock(QFontEngineQPA::BlockTag tag, const QByteArray &data)
+void QPF2Generator::writeBlock(QFontEngineQPF2::BlockTag tag, const QByteArray &data)
 {
     writeUInt16(tag);
     writeUInt16(0); // padding
@@ -593,144 +585,32 @@ void QPAGenerator::writeBlock(QFontEngineQPA::BlockTag tag, const QByteArray &da
         writeUInt8(0);
 }
 
-void QPAGenerator::writeTaggedString(QFontEngineQPA::HeaderTag tag, const QByteArray &string)
+void QPF2Generator::writeTaggedString(QFontEngineQPF2::HeaderTag tag, const QByteArray &string)
 {
     writeUInt16(tag);
     writeUInt16(string.length());
     dev->write(string);
 }
 
-void QPAGenerator::writeTaggedUInt32(QFontEngineQPA::HeaderTag tag, quint32 value)
+void QPF2Generator::writeTaggedUInt32(QFontEngineQPF2::HeaderTag tag, quint32 value)
 {
     writeUInt16(tag);
     writeUInt16(sizeof(value));
     writeUInt32(value);
 }
 
-void QPAGenerator::writeTaggedUInt8(QFontEngineQPA::HeaderTag tag, quint8 value)
+void QPF2Generator::writeTaggedUInt8(QFontEngineQPF2::HeaderTag tag, quint8 value)
 {
     writeUInt16(tag);
     writeUInt16(sizeof(value));
     writeUInt8(value);
 }
 
-void QPAGenerator::writeTaggedQFixed(QFontEngineQPA::HeaderTag tag, QFixed value)
+void QPF2Generator::writeTaggedQFixed(QFontEngineQPF2::HeaderTag tag, QFixed value)
 {
     writeUInt16(tag);
     writeUInt16(sizeof(quint32));
     writeUInt32(value.value());
 }
 
-
-/*
-    Creates a new multi QPA engine.
-
-    This function takes ownership of the QFontEngine, increasing it's refcount.
-*/
-QFontEngineMultiQPA::QFontEngineMultiQPA(QFontEngine *fe, int _script, const QStringList &fallbacks)
-    : QFontEngineMulti(fallbacks.size() + 1),
-      fallbackFamilies(fallbacks), script(_script)
-    , fallbacksQueried(true)
-{
-    init(fe);
-}
-
-QFontEngineMultiQPA::QFontEngineMultiQPA(QFontEngine *fe, int _script)
-    : QFontEngineMulti(2)
-    , script(_script)
-    , fallbacksQueried(false)
-{
-    fallbackFamilies << QString();
-    init(fe);
-}
-
-void QFontEngineMultiQPA::init(QFontEngine *fe)
-{
-    Q_ASSERT(fe && fe->type() != QFontEngine::Multi);
-    engines[0] = fe;
-    fe->ref.ref();
-    fontDef = engines[0]->fontDef;
-    cache_cost = fe->cache_cost;
-}
-
-void QFontEngineMultiQPA::loadEngine(int at)
-{
-    ensureFallbackFamiliesQueried();
-    Q_ASSERT(at < engines.size());
-    Q_ASSERT(engines.at(at) == 0);
-    QFontDef request = fontDef;
-    request.styleStrategy |= QFont::NoFontMerging;
-    request.family = fallbackFamilies.at(at-1);
-    engines[at] = QFontDatabase::findFont(script,
-                                          /*fontprivate = */0,
-                                          request, /*multi = */false, true);
-    Q_ASSERT(engines[at]);
-    engines[at]->ref.ref();
-    engines[at]->fontDef = request;
-}
-void QFontEngineMultiQPA::ensureFallbackFamiliesQueried()
-{
-    if (fallbacksQueried)
-        return;
-    QStringList fallbacks = QGuiApplicationPrivate::instance()->platformIntegration()->fontDatabase()->fallbacksForFamily(engine(0)->fontDef.family, QFont::Style(engine(0)->fontDef.style)
-                                                                                                                          , QFont::AnyStyle, QChar::Script(script));
-    setFallbackFamiliesList(fallbacks);
-}
-
-void QFontEngineMultiQPA::setFallbackFamiliesList(const QStringList &fallbacks)
-{
-    // Original FontEngine to restore after the fill.
-    QFontEngine *fe = engines[0];
-    fallbackFamilies = fallbacks;
-    if (!fallbackFamilies.isEmpty()) {
-        engines.fill(0, fallbackFamilies.size() + 1);
-        engines[0] = fe;
-    } else {
-        // Turns out we lied about having any fallback at all.
-        fallbackFamilies << fe->fontDef.family;
-        engines[1] = fe;
-        fe->ref.ref();
-    }
-    fallbacksQueried = true;
-}
-
-/*
-  This is used indirectly by Qt WebKit when using QTextLayout::setRawFont
-
-  The purpose of this is to provide the necessary font fallbacks when drawing complex
-  text. Since Qt WebKit ends up repeatedly creating QTextLayout instances and passing them
-  the same raw font over and over again, we want to cache the corresponding multi font engine
-  as it may contain fallback font engines already.
-*/
-QFontEngine* QFontEngineMultiQPA::createMultiFontEngine(QFontEngine *fe, int script)
-{
-    QFontEngine *engine = 0;
-    QFontCache::Key key(fe->fontDef, script, /*multi = */true);
-    QFontCache *fc = QFontCache::instance();
-    //  We can't rely on the fontDef (and hence the cache Key)
-    //  alone to distinguish webfonts, since these should not be
-    //  accidentally shared, even if the resulting fontcache key
-    //  is strictly identical. See:
-    //   http://www.w3.org/TR/css3-fonts/#font-face-rule
-    const bool faceIsLocal = !fe->faceId().filename.isEmpty();
-    QFontCache::EngineCache::Iterator it = fc->engineCache.find(key),
-            end = fc->engineCache.end();
-    while (it != end && it.key() == key) {
-        Q_ASSERT(it.value().data->type() == QFontEngine::Multi);
-        QFontEngineMulti *cachedEngine = static_cast<QFontEngineMulti *>(it.value().data);
-        if (faceIsLocal || fe == cachedEngine->engine(0)) {
-            engine = cachedEngine;
-            fc->updateHitCountAndTimeStamp(it.value());
-            break;
-        }
-        it++;
-    }
-    if (!engine) {
-        engine = QGuiApplicationPrivate::instance()->platformIntegration()->fontDatabase()->fontEngineMulti(fe, QChar::Script(script));
-        QFontCache::instance()->insertEngine(key, engine, /* insertMulti */ !faceIsLocal);
-    }
-    Q_ASSERT(engine);
-    return engine;
-}
-
 QT_END_NAMESPACE
diff --git a/src/gui/text/qfontengine_qpa_p.h b/src/gui/text/qfontengine_qpf2_p.h
index e84b067c68..e8c3989b58 100644
--- a/src/gui/text/qfontengine_qpa_p.h
+++ b/src/gui/text/qfontengine_qpf2_p.h
@@ -1,46 +1,38 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-#ifndef QFONTENGINE_QPA_P_H
-#define QFONTENGINE_QPA_P_H
+#ifndef QFONTENGINE_QPF2_P_H
+#define QFONTENGINE_QPF2_P_H
 
 //
 //  W A R N I N G
@@ -67,7 +59,7 @@ class QFontEngine;
 class QFreetypeFace;
 class QBuffer;
 
-class Q_GUI_EXPORT QFontEngineQPA : public QFontEngine
+class Q_GUI_EXPORT QFontEngineQPF2 : public QFontEngine
 {
 public:
     // if you add new tags please make sure to update the tables in
@@ -157,8 +149,8 @@ public:
         qint8 advance;
     };
 
-    QFontEngineQPA(const QFontDef &def, const QByteArray &data);
-    ~QFontEngineQPA();
+    QFontEngineQPF2(const QFontDef &def, const QByteArray &data);
+    ~QFontEngineQPF2();
 
     FaceId faceId() const { return face_id; }
     bool getSfntTableData(uint tag, uchar *buffer, uint *length) const;
@@ -211,20 +203,20 @@ private:
     mutable bool kerning_pairs_loaded;
 };
 
-struct QPAGenerator
+struct QPF2Generator
 {
-    QPAGenerator(QBuffer *device, QFontEngine *engine)
+    QPF2Generator(QBuffer *device, QFontEngine *engine)
         : dev(device), fe(engine) {}
 
     void generate();
     void writeHeader();
     void writeGMap();
-    void writeBlock(QFontEngineQPA::BlockTag tag, const QByteArray &data);
+    void writeBlock(QFontEngineQPF2::BlockTag tag, const QByteArray &data);
 
-    void writeTaggedString(QFontEngineQPA::HeaderTag tag, const QByteArray &string);
-    void writeTaggedUInt32(QFontEngineQPA::HeaderTag tag, quint32 value);
-    void writeTaggedUInt8(QFontEngineQPA::HeaderTag tag, quint8 value);
-    void writeTaggedQFixed(QFontEngineQPA::HeaderTag tag, QFixed value);
+    void writeTaggedString(QFontEngineQPF2::HeaderTag tag, const QByteArray &string);
+    void writeTaggedUInt32(QFontEngineQPF2::HeaderTag tag, quint32 value);
+    void writeTaggedUInt8(QFontEngineQPF2::HeaderTag tag, quint8 value);
+    void writeTaggedQFixed(QFontEngineQPF2::HeaderTag tag, QFixed value);
 
     void writeUInt16(quint16 value) { value = qToBigEndian(value); dev->write((const char *)&value, sizeof(value)); }
     void writeUInt32(quint32 value) { value = qToBigEndian(value); dev->write((const char *)&value, sizeof(value)); }
@@ -237,29 +229,6 @@ struct QPAGenerator
     QFontEngine *fe;
 };
 
-class Q_GUI_EXPORT QFontEngineMultiQPA : public QFontEngineMulti
-{
-public:
-    QFontEngineMultiQPA(QFontEngine *fe, int script, const QStringList &fallbacks);
-    QFontEngineMultiQPA(QFontEngine *fe, int script);
-
-    void loadEngine(int at);
-    static QFontEngine* createMultiFontEngine(QFontEngine *fe, int script);
-
-    int fallbackFamilyCount() const { return fallbackFamilies.size(); }
-    QString fallbackFamilyAt(int at) const { return fallbackFamilies.at(at); }
-
-    virtual void ensureFallbackFamiliesQueried();
-    virtual void setFallbackFamiliesList(const QStringList &fallbacks);
-
-private:
-    void init(QFontEngine *fe);
-
-    mutable QStringList fallbackFamilies;
-    int script;
-    mutable bool fallbacksQueried;
-};
-
 QT_END_NAMESPACE
 
-#endif // QFONTENGINE_QPA_P_H
+#endif // QFONTENGINE_QPF2_P_H
diff --git a/src/gui/text/qfontengineglyphcache_p.h b/src/gui/text/qfontengineglyphcache_p.h
index 65be14b90f..4a3345f9df 100644
--- a/src/gui/text/qfontengineglyphcache_p.h
+++ b/src/gui/text/qfontengineglyphcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontinfo.h b/src/gui/text/qfontinfo.h
index efa8f6ef61..68647d6841 100644
--- a/src/gui/text/qfontinfo.h
+++ b/src/gui/text/qfontinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontmetrics.cpp b/src/gui/text/qfontmetrics.cpp
index f6ab123739..9610482145 100644
--- a/src/gui/text/qfontmetrics.cpp
+++ b/src/gui/text/qfontmetrics.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontmetrics.h b/src/gui/text/qfontmetrics.h
index 00b38eb674..c152ad21c7 100644
--- a/src/gui/text/qfontmetrics.h
+++ b/src/gui/text/qfontmetrics.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontsubset.cpp b/src/gui/text/qfontsubset.cpp
index 4bb29da2af..160472cb5d 100644
--- a/src/gui/text/qfontsubset.cpp
+++ b/src/gui/text/qfontsubset.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontsubset_agl.cpp b/src/gui/text/qfontsubset_agl.cpp
index a2c8f7b0a0..48924deff2 100644
--- a/src/gui/text/qfontsubset_agl.cpp
+++ b/src/gui/text/qfontsubset_agl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfontsubset_p.h b/src/gui/text/qfontsubset_p.h
index df5e72ab7d..2e9021d3f1 100644
--- a/src/gui/text/qfontsubset_p.h
+++ b/src/gui/text/qfontsubset_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfragmentmap.cpp b/src/gui/text/qfragmentmap.cpp
index 78149c5d5d..52c57d7722 100644
--- a/src/gui/text/qfragmentmap.cpp
+++ b/src/gui/text/qfragmentmap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qfragmentmap_p.h b/src/gui/text/qfragmentmap_p.h
index 4481eec456..012d3c25ce 100644
--- a/src/gui/text/qfragmentmap_p.h
+++ b/src/gui/text/qfragmentmap_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qglyphrun.cpp b/src/gui/text/qglyphrun.cpp
index aba991ba2b..72c1e764eb 100644
--- a/src/gui/text/qglyphrun.cpp
+++ b/src/gui/text/qglyphrun.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qglyphrun.h b/src/gui/text/qglyphrun.h
index 435379085e..7c9efa1d37 100644
--- a/src/gui/text/qglyphrun.h
+++ b/src/gui/text/qglyphrun.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qglyphrun_p.h b/src/gui/text/qglyphrun_p.h
index 2e209a3429..c9554d0d6d 100644
--- a/src/gui/text/qglyphrun_p.h
+++ b/src/gui/text/qglyphrun_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qharfbuzzng.cpp b/src/gui/text/qharfbuzzng.cpp
index e87747fd1b..eb7bca1974 100644
--- a/src/gui/text/qharfbuzzng.cpp
+++ b/src/gui/text/qharfbuzzng.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Konstantin Ritt
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qharfbuzzng_p.h b/src/gui/text/qharfbuzzng_p.h
index 10cac69875..64c99ef133 100644
--- a/src/gui/text/qharfbuzzng_p.h
+++ b/src/gui/text/qharfbuzzng_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Konstantin Ritt
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qplatformfontdatabase.cpp b/src/gui/text/qplatformfontdatabase.cpp
index da44a275f8..f18ddbab8a 100644
--- a/src/gui/text/qplatformfontdatabase.cpp
+++ b/src/gui/text/qplatformfontdatabase.cpp
@@ -1,47 +1,39 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qplatformfontdatabase.h"
 #include <QtGui/private/qfontengine_p.h>
-#include <QtGui/private/qfontengine_qpa_p.h>
+#include <QtGui/private/qfontengine_qpf2_p.h>
 #include <QtCore/QLibraryInfo>
 #include <QtCore/QDir>
 
@@ -69,12 +61,12 @@ void QPlatformFontDatabase::registerQPF2Font(const QByteArray &dataArray, void *
         return;
 
     const uchar *data = reinterpret_cast<const uchar *>(dataArray.constData());
-    if (QFontEngineQPA::verifyHeader(data, dataArray.size())) {
-        QString fontName = QFontEngineQPA::extractHeaderField(data, QFontEngineQPA::Tag_FontName).toString();
-        int pixelSize = QFontEngineQPA::extractHeaderField(data, QFontEngineQPA::Tag_PixelSize).toInt();
-        QVariant weight = QFontEngineQPA::extractHeaderField(data, QFontEngineQPA::Tag_Weight);
-        QVariant style = QFontEngineQPA::extractHeaderField(data, QFontEngineQPA::Tag_Style);
-        QByteArray writingSystemBits = QFontEngineQPA::extractHeaderField(data, QFontEngineQPA::Tag_WritingSystems).toByteArray();
+    if (QFontEngineQPF2::verifyHeader(data, dataArray.size())) {
+        QString fontName = QFontEngineQPF2::extractHeaderField(data, QFontEngineQPF2::Tag_FontName).toString();
+        int pixelSize = QFontEngineQPF2::extractHeaderField(data, QFontEngineQPF2::Tag_PixelSize).toInt();
+        QVariant weight = QFontEngineQPF2::extractHeaderField(data, QFontEngineQPF2::Tag_Weight);
+        QVariant style = QFontEngineQPF2::extractHeaderField(data, QFontEngineQPF2::Tag_Style);
+        QByteArray writingSystemBits = QFontEngineQPF2::extractHeaderField(data, QFontEngineQPF2::Tag_WritingSystems).toByteArray();
 
         if (!fontName.isEmpty() && pixelSize) {
             QFont::Weight fontWeight = QFont::Normal;
@@ -322,7 +314,7 @@ void QPlatformFontDatabase::invalidate()
 */
 QFontEngineMulti *QPlatformFontDatabase::fontEngineMulti(QFontEngine *fontEngine, QChar::Script script)
 {
-    return new QFontEngineMultiQPA(fontEngine, script);
+    return new QFontEngineMultiBasicImpl(fontEngine, script);
 }
 
 /*!
@@ -332,7 +324,7 @@ QFontEngineMulti *QPlatformFontDatabase::fontEngineMulti(QFontEngine *fontEngine
 QFontEngine *QPlatformFontDatabase::fontEngine(const QFontDef &fontDef, void *handle)
 {
     QByteArray *fileDataPtr = static_cast<QByteArray *>(handle);
-    QFontEngineQPA *engine = new QFontEngineQPA(fontDef,*fileDataPtr);
+    QFontEngineQPF2 *engine = new QFontEngineQPF2(fontDef,*fileDataPtr);
     //qDebug() << fontDef.pixelSize << fontDef.weight << fontDef.style << fontDef.stretch << fontDef.styleHint << fontDef.styleStrategy << fontDef.family;
     return engine;
 }
diff --git a/src/gui/text/qplatformfontdatabase.h b/src/gui/text/qplatformfontdatabase.h
index 46ef5c0f46..a75d55f91a 100644
--- a/src/gui/text/qplatformfontdatabase.h
+++ b/src/gui/text/qplatformfontdatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qrawfont.cpp b/src/gui/text/qrawfont.cpp
index f789ec596b..0c3c9bb493 100644
--- a/src/gui/text/qrawfont.cpp
+++ b/src/gui/text/qrawfont.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,6 +39,10 @@
 #include "qrawfont_p.h"
 #include "qplatformfontdatabase.h"
 
+#include <private/qguiapplication_p.h>
+#include <qpa/qplatformintegration.h>
+#include <qpa/qplatformfontdatabase.h>
+
 #include <QtCore/qendian.h>
 
 QT_BEGIN_NAMESPACE
@@ -252,7 +248,7 @@ void QRawFont::loadFromData(const QByteArray &fontData,
     d->cleanUp();
     d->hintingPreference = hintingPreference;
     d->thread = QThread::currentThread();
-    d->platformLoadFromData(fontData, pixelSize, hintingPreference);
+    d->loadFromData(fontData, pixelSize, hintingPreference);
 }
 
 /*!
@@ -735,7 +731,6 @@ void QRawFont::setPixelSize(qreal pixelSize)
 */
 void QRawFontPrivate::cleanUp()
 {
-    platformCleanUp();
     if (fontEngine != 0) {
         if (!fontEngine->ref.deref())
             delete fontEngine;
@@ -744,6 +739,17 @@ void QRawFontPrivate::cleanUp()
     hintingPreference = QFont::PreferDefaultHinting;
 }
 
+void QRawFontPrivate::loadFromData(const QByteArray &fontData, qreal pixelSize,
+                                           QFont::HintingPreference hintingPreference)
+{
+    Q_ASSERT(fontEngine == 0);
+
+    QPlatformFontDatabase *pfdb = QGuiApplicationPrivate::platformIntegration()->fontDatabase();
+    fontEngine = pfdb->fontEngine(fontData, pixelSize, hintingPreference);
+    if (fontEngine != 0)
+        fontEngine->ref.ref();
+}
+
 /*!
   Returns the smallest rectangle containing the glyph with the given \a glyphIndex.
 
diff --git a/src/gui/text/qrawfont.h b/src/gui/text/qrawfont.h
index eb84a8fee7..031dd056a7 100644
--- a/src/gui/text/qrawfont.h
+++ b/src/gui/text/qrawfont.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qrawfont_p.h b/src/gui/text/qrawfont_p.h
index c9c15717cc..f7a951ec59 100644
--- a/src/gui/text/qrawfont_p.h
+++ b/src/gui/text/qrawfont_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -95,8 +87,7 @@ public:
     }
 
     void cleanUp();
-    void platformCleanUp();
-    void platformLoadFromData(const QByteArray &fontData,
+    void loadFromData(const QByteArray &fontData,
                               qreal pixelSize,
                               QFont::HintingPreference hintingPreference);
 
diff --git a/src/gui/text/qrawfont_qpa.cpp b/src/gui/text/qrawfont_qpa.cpp
deleted file mode 100644
index 7de6ef0e8b..0000000000
--- a/src/gui/text/qrawfont_qpa.cpp
+++ /dev/null
@@ -1,70 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QtCore/qglobal.h>
-
-#if !defined(QT_NO_RAWFONT)
-
-#include "qrawfont_p.h"
-#include <qpa/qplatformintegration.h>
-#include <qpa/qplatformfontdatabase.h>
-#include <private/qguiapplication_p.h>
-
-QT_BEGIN_NAMESPACE
-
-void QRawFontPrivate::platformCleanUp()
-{
-}
-
-void QRawFontPrivate::platformLoadFromData(const QByteArray &fontData, qreal pixelSize,
-                                           QFont::HintingPreference hintingPreference)
-{
-    Q_ASSERT(fontEngine == 0);
-
-    QPlatformFontDatabase *pfdb = QGuiApplicationPrivate::platformIntegration()->fontDatabase();
-    fontEngine = pfdb->fontEngine(fontData, pixelSize, hintingPreference);
-    if (fontEngine != 0)
-        fontEngine->ref.ref();
-}
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_RAWFONT
diff --git a/src/gui/text/qstatictext.cpp b/src/gui/text/qstatictext.cpp
index 0afc6f9259..efced94397 100644
--- a/src/gui/text/qstatictext.cpp
+++ b/src/gui/text/qstatictext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the test suite of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qstatictext.h b/src/gui/text/qstatictext.h
index e41c475495..f2357e562c 100644
--- a/src/gui/text/qstatictext.h
+++ b/src/gui/text/qstatictext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the test suite of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qstatictext_p.h b/src/gui/text/qstatictext_p.h
index 4451f27b27..29db8836d9 100644
--- a/src/gui/text/qstatictext_p.h
+++ b/src/gui/text/qstatictext_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the test suite of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -79,7 +71,8 @@ class Q_GUI_EXPORT QStaticTextItem
 {
 public:
     QStaticTextItem() : chars(0), numChars(0), useBackendOptimizations(false),
-                        userDataNeedsUpdate(0), m_fontEngine(0), m_userData(0) {}
+                        userDataNeedsUpdate(0), usesRawFont(0),
+                        m_fontEngine(0), m_userData(0) {}
 
     QStaticTextItem(const QStaticTextItem &other)
     {
@@ -97,6 +90,7 @@ public:
         color = other.color;
         useBackendOptimizations = other.useBackendOptimizations;
         userDataNeedsUpdate = other.userDataNeedsUpdate;
+        usesRawFont = other.usesRawFont;
 
         m_fontEngine = 0;
         m_userData = 0;
@@ -145,6 +139,7 @@ public:
     QColor color;                                // 10 bytes per item
     char useBackendOptimizations : 1;            // 1 byte per item
     char userDataNeedsUpdate : 1;                //
+    char usesRawFont : 1;                        //
                                                  // ================
                                                  // 51 bytes per item
 
diff --git a/src/gui/text/qsyntaxhighlighter.cpp b/src/gui/text/qsyntaxhighlighter.cpp
index 784aeb9a71..7924dff5e9 100644
--- a/src/gui/text/qsyntaxhighlighter.cpp
+++ b/src/gui/text/qsyntaxhighlighter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qsyntaxhighlighter.h b/src/gui/text/qsyntaxhighlighter.h
index 8af35a1345..b71e3a6b8e 100644
--- a/src/gui/text/qsyntaxhighlighter.h
+++ b/src/gui/text/qsyntaxhighlighter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextcursor.cpp b/src/gui/text/qtextcursor.cpp
index 731b6adde8..2e289e2bd8 100644
--- a/src/gui/text/qtextcursor.cpp
+++ b/src/gui/text/qtextcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextcursor.h b/src/gui/text/qtextcursor.h
index 560e80d174..4dc11b54bf 100644
--- a/src/gui/text/qtextcursor.h
+++ b/src/gui/text/qtextcursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextcursor_p.h b/src/gui/text/qtextcursor_p.h
index 2950be74e0..a0b157227e 100644
--- a/src/gui/text/qtextcursor_p.h
+++ b/src/gui/text/qtextcursor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocument.cpp b/src/gui/text/qtextdocument.cpp
index fa54776b6d..ea2b794feb 100644
--- a/src/gui/text/qtextdocument.cpp
+++ b/src/gui/text/qtextdocument.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocument.h b/src/gui/text/qtextdocument.h
index 854cb29ed9..2329a9e721 100644
--- a/src/gui/text/qtextdocument.h
+++ b/src/gui/text/qtextdocument.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocument_p.cpp b/src/gui/text/qtextdocument_p.cpp
index 4b6ce667fa..8ff15106e3 100644
--- a/src/gui/text/qtextdocument_p.cpp
+++ b/src/gui/text/qtextdocument_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocument_p.h b/src/gui/text/qtextdocument_p.h
index fa22131c9e..b36a184f8d 100644
--- a/src/gui/text/qtextdocument_p.h
+++ b/src/gui/text/qtextdocument_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocumentfragment.cpp b/src/gui/text/qtextdocumentfragment.cpp
index 3bd1e2a801..18b72c5b33 100644
--- a/src/gui/text/qtextdocumentfragment.cpp
+++ b/src/gui/text/qtextdocumentfragment.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1142,7 +1134,7 @@ QTextHtmlImporter::ProcessNodeResult QTextHtmlImporter::processBlockNode()
         }
         if (hasBlock) {
             QTextBlockFormat fmt;
-            fmt.setIndent(0);
+            fmt.setIndent(currentNode->blockFormat.indent());
             cursor.mergeBlockFormat(fmt);
         }
     }
diff --git a/src/gui/text/qtextdocumentfragment.h b/src/gui/text/qtextdocumentfragment.h
index fe9fbffa56..15a20d6dac 100644
--- a/src/gui/text/qtextdocumentfragment.h
+++ b/src/gui/text/qtextdocumentfragment.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocumentfragment_p.h b/src/gui/text/qtextdocumentfragment_p.h
index 4ef73376a1..53a9bfcebe 100644
--- a/src/gui/text/qtextdocumentfragment_p.h
+++ b/src/gui/text/qtextdocumentfragment_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocumentlayout.cpp b/src/gui/text/qtextdocumentlayout.cpp
index b2c82b8654..163d51aec2 100644
--- a/src/gui/text/qtextdocumentlayout.cpp
+++ b/src/gui/text/qtextdocumentlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -2080,15 +2072,32 @@ QRectF QTextDocumentLayoutPrivate::layoutFrame(QTextFrame *f, int layoutFrom, in
     QTextFrameData *fd = data(f);
     QFixed newContentsWidth;
 
+    bool fullLayout = false;
     {
         QTextFrameFormat fformat = f->frameFormat();
         // set sizes of this frame from the format
-        fd->topMargin = QFixed::fromReal(fformat.topMargin());
-        fd->bottomMargin = QFixed::fromReal(fformat.bottomMargin());
+        QFixed tm = QFixed::fromReal(fformat.topMargin());
+        if (tm != fd->topMargin) {
+            fd->topMargin = tm;
+            fullLayout = true;
+        }
+        QFixed bm = QFixed::fromReal(fformat.bottomMargin());
+        if (bm != fd->bottomMargin) {
+            fd->bottomMargin = bm;
+            fullLayout = true;
+        }
         fd->leftMargin = QFixed::fromReal(fformat.leftMargin());
         fd->rightMargin = QFixed::fromReal(fformat.rightMargin());
-        fd->border = QFixed::fromReal(fformat.border());
-        fd->padding = QFixed::fromReal(fformat.padding());
+        QFixed b = QFixed::fromReal(fformat.border());
+        if (b != fd->border) {
+            fd->border = b;
+            fullLayout = true;
+        }
+        QFixed p = QFixed::fromReal(fformat.padding());
+        if (p != fd->padding) {
+            fd->padding = p;
+            fullLayout = true;
+        }
 
         QTextFrame *parent = f->parentFrame();
         const QTextFrameData *pd = parent ? data(parent) : 0;
@@ -2143,7 +2152,7 @@ QRectF QTextDocumentLayoutPrivate::layoutFrame(QTextFrame *f, int layoutFrom, in
     layoutStruct.contentsWidth = 0;
     layoutStruct.minimumWidth = 0;
     layoutStruct.maximumWidth = QFIXED_MAX;
-    layoutStruct.fullLayout = fd->oldContentsWidth != newContentsWidth;
+    layoutStruct.fullLayout = fullLayout || (fd->oldContentsWidth != newContentsWidth);
     layoutStruct.updateRect = QRectF(QPointF(0, 0), QSizeF(qreal(INT_MAX), qreal(INT_MAX)));
     LDEBUG << "layoutStruct: x_left" << layoutStruct.x_left << "x_right" << layoutStruct.x_right
            << "fullLayout" << layoutStruct.fullLayout;
diff --git a/src/gui/text/qtextdocumentlayout_p.h b/src/gui/text/qtextdocumentlayout_p.h
index d29527e4f7..f72a177d13 100644
--- a/src/gui/text/qtextdocumentlayout_p.h
+++ b/src/gui/text/qtextdocumentlayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocumentwriter.cpp b/src/gui/text/qtextdocumentwriter.cpp
index 1722a791b9..b6cc44cdeb 100644
--- a/src/gui/text/qtextdocumentwriter.cpp
+++ b/src/gui/text/qtextdocumentwriter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextdocumentwriter.h b/src/gui/text/qtextdocumentwriter.h
index 7fba23139b..8235eeedc9 100644
--- a/src/gui/text/qtextdocumentwriter.h
+++ b/src/gui/text/qtextdocumentwriter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextengine.cpp b/src/gui/text/qtextengine.cpp
index 8e2b90033c..9fe1fd26e9 100644
--- a/src/gui/text/qtextengine.cpp
+++ b/src/gui/text/qtextengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,10 +51,6 @@
 #include <algorithm>
 #include <stdlib.h>
 
-#ifndef QT_NO_RAWFONT
-#include "qfontengine_qpa_p.h"
-#endif
-
 QT_BEGIN_NAMESPACE
 
 static const float smallCapsFraction = 0.7f;
@@ -88,7 +76,7 @@ public:
     /// The caps parameter is used to choose the algoritm of splitting text and assiging roles to the textitems
     void generate(int start, int length, QFont::Capitalization caps)
     {
-        if ((int)caps == (int)QFont::SmallCaps)
+        if (caps == QFont::SmallCaps)
             generateScriptItemsSmallCaps(reinterpret_cast<const ushort *>(m_string.unicode()), start, length);
         else if(caps == QFont::Capitalize)
             generateScriptItemsCapitalize(start, length);
@@ -843,6 +831,81 @@ enum JustificationClass {
     Justification_Arabic_Kashida  = 13   // User-inserted Kashida(U+0640)
 };
 
+#ifdef QT_ENABLE_HARFBUZZ_NG
+
+/*
+    Adds an inter character justification opportunity after the number or letter
+    character and a space justification opportunity after the space character.
+*/
+static inline void qt_getDefaultJustificationOpportunities(const ushort *string, int length, QGlyphLayout g, ushort *log_clusters, int spaceAs)
+{
+    int str_pos = 0;
+    while (str_pos < length) {
+        int glyph_pos = log_clusters[str_pos];
+
+        Q_ASSERT(glyph_pos < g.numGlyphs && g.attributes[glyph_pos].clusterStart);
+
+        uint ucs4 = string[str_pos];
+        if (QChar::isHighSurrogate(ucs4) && str_pos + 1 < length) {
+            ushort low = string[str_pos + 1];
+            if (QChar::isLowSurrogate(low)) {
+                ++str_pos;
+                ucs4 = QChar::surrogateToUcs4(ucs4, low);
+            }
+        }
+
+        // skip whole cluster
+        do {
+            ++str_pos;
+        } while (str_pos < length && log_clusters[str_pos] == glyph_pos);
+        do {
+            ++glyph_pos;
+        } while (glyph_pos < g.numGlyphs && !g.attributes[glyph_pos].clusterStart);
+        --glyph_pos;
+
+        // justification opportunity at the end of cluster
+        if (Q_LIKELY(QChar::isLetterOrNumber(ucs4)))
+            g.attributes[glyph_pos].justification = Justification_Character;
+        else if (Q_LIKELY(QChar::isSpace(ucs4)))
+            g.attributes[glyph_pos].justification = spaceAs;
+    }
+}
+
+static inline void qt_getJustificationOpportunities(const ushort *string, int length, const QScriptItem &si, QGlyphLayout g, ushort *log_clusters)
+{
+    Q_ASSERT(length > 0 && g.numGlyphs > 0);
+
+    for (int glyph_pos = 0; glyph_pos < g.numGlyphs; ++glyph_pos)
+        g.attributes[glyph_pos].justification = Justification_Prohibited;
+
+    int spaceAs;
+
+    switch (si.analysis.script) {
+    case QChar::Script_Nko:
+    case QChar::Script_Mandaic:
+    case QChar::Script_Mongolian:
+    case QChar::Script_PhagsPa:
+        // same as default but inter character justification takes precedence
+        spaceAs = Justification_Arabic_Space;
+        break;
+
+    case QChar::Script_Hiragana:
+    case QChar::Script_Katakana:
+    case QChar::Script_Han:
+        // same as default but inter character justification is the only option
+        spaceAs = Justification_Character;
+        break;
+
+    default:
+        spaceAs = Justification_Space;
+        break;
+    }
+
+    qt_getDefaultJustificationOpportunities(string, length, g, log_clusters, spaceAs);
+}
+
+#endif // QT_ENABLE_HARFBUZZ_NG
+
 
 // shape all the items that intersect with the line, taking tab widths into account to find out what text actually fits in the line.
 void QTextEngine::shapeLine(const QScriptLine &line)
@@ -853,7 +916,7 @@ void QTextEngine::shapeLine(const QScriptLine &line)
     int item = findItem(line.from);
     if (item == -1)
         return;
-    for (item = findItem(line.from); item <= end; ++item) {
+    for ( ; item <= end; ++item) {
         QScriptItem &si = layoutData->items[item];
         if (si.analysis.flags == QScriptAnalysis::Tab) {
             ensureSpace(1);
@@ -1003,6 +1066,11 @@ void QTextEngine::shapeText(int item) const
 
     QGlyphLayout glyphs = shapedGlyphs(&si);
 
+#ifdef QT_ENABLE_HARFBUZZ_NG
+    if (useHarfbuzzNG)
+        qt_getJustificationOpportunities(string, itemLength, si, glyphs, logClusters(&si));
+#endif
+
     if (letterSpacing != 0) {
         for (int i = 1; i < si.num_glyphs; ++i) {
             if (glyphs.attributes[i].clusterStart) {
@@ -1082,7 +1150,7 @@ int QTextEngine::shapeTextWithHarfbuzzNG(const QScriptItem &si, const ushort *st
         hb_buffer_set_segment_properties(buffer, &props);
         hb_buffer_guess_segment_properties(buffer);
 
-        uint buffer_flags = 0; // HB_BUFFER_FLAG_DEFAULT
+        uint buffer_flags = HB_BUFFER_FLAG_DEFAULT;
         // Symbol encoding used to encode various crap in the 32..255 character code range,
         // and thus might override U+00AD [SHY]; avoid hiding default ignorables
         if (actualFontEngine->symbol)
@@ -1332,7 +1400,6 @@ void QTextEngine::init(QTextEngine *e)
     e->minWidth = 0;
     e->maxWidth = 0;
 
-    e->underlinePositions = 0;
     e->specialData = 0;
     e->stackEngine = false;
 #ifndef QT_NO_RAWFONT
@@ -1424,8 +1491,6 @@ void QTextEngine::invalidate()
     freeMemory();
     minWidth = 0;
     maxWidth = 0;
-    if (specialData)
-        specialData->resolvedFormats.clear();
 
     resetFontEngineCache();
 }
@@ -1586,9 +1651,9 @@ void QTextEngine::itemize() const
                 }
                 Q_ASSERT(position <= length);
                 QFont::Capitalization capitalization =
-                        formats()->charFormat(format).hasProperty(QTextFormat::FontCapitalization)
-                        ? formats()->charFormat(format).fontCapitalization()
-                        : formats()->defaultFont().capitalization();
+                        formatCollection()->charFormat(format).hasProperty(QTextFormat::FontCapitalization)
+                        ? formatCollection()->charFormat(format).fontCapitalization()
+                        : formatCollection()->defaultFont().capitalization();
                 itemizer.generate(prevPosition, position - prevPosition, capitalization);
                 if (it == end) {
                     if (position < length)
@@ -1605,8 +1670,8 @@ void QTextEngine::itemize() const
 #ifndef QT_NO_RAWFONT
         if (useRawFont && specialData) {
             int lastIndex = 0;
-            for (int i = 0; i < specialData->addFormats.size(); ++i) {
-                const QTextLayout::FormatRange &range = specialData->addFormats.at(i);
+            for (int i = 0; i < specialData->formats.size(); ++i) {
+                const QTextLayout::FormatRange &range = specialData->formats.at(i);
                 const QTextCharFormat &format = range.format;
                 if (format.hasProperty(QTextFormat::FontCapitalization)) {
                     itemizer.generate(lastIndex, range.start - lastIndex, QFont::MixedCase);
@@ -1621,7 +1686,7 @@ void QTextEngine::itemize() const
     }
 
     addRequiredBoundaries();
-    resolveAdditionalFormats();
+    resolveFormats();
 }
 
 bool QTextEngine::isRightToLeft() const
@@ -1646,6 +1711,9 @@ bool QTextEngine::isRightToLeft() const
 int QTextEngine::findItem(int strPos) const
 {
     itemize();
+    if (strPos < 0 || strPos >= layoutData->string.size())
+        return -1;
+
     int left = 1;
     int right = layoutData->items.size()-1;
     while(left <= right) {
@@ -1884,7 +1952,7 @@ QFontEngine *QTextEngine::fontEngine(const QScriptItem &si, QFixed *ascent, QFix
         if (feCache.prevFontEngine && feCache.prevFontEngine->type() == QFontEngine::Multi && feCache.prevScript == script) {
             engine = feCache.prevFontEngine;
         } else {
-            engine = QFontEngineMultiQPA::createMultiFontEngine(rawFont.d->fontEngine, script);
+            engine = QFontEngineMultiBasicImpl::createMultiFontEngine(rawFont.d->fontEngine, script);
             feCache.prevFontEngine = engine;
             feCache.prevScript = script;
             engine->ref.ref();
@@ -1893,13 +1961,13 @@ QFontEngine *QTextEngine::fontEngine(const QScriptItem &si, QFixed *ascent, QFix
                 feCache.prevScaledFontEngine = 0;
             }
         }
-        if (si.analysis.flags & QFont::SmallCaps) {
+        if (si.analysis.flags == QScriptAnalysis::SmallCaps) {
             if (feCache.prevScaledFontEngine) {
                 scaledEngine = feCache.prevScaledFontEngine;
             } else {
                 QFontEngine *scEngine = rawFont.d->fontEngine->cloneWithSize(smallCapsFraction * rawFont.pixelSize());
                 scEngine->ref.ref();
-                scaledEngine = QFontEngineMultiQPA::createMultiFontEngine(scEngine, script);
+                scaledEngine = QFontEngineMultiBasicImpl::createMultiFontEngine(scEngine, script);
                 scaledEngine->ref.ref();
                 feCache.prevScaledFontEngine = scaledEngine;
                 // If scEngine is not ref'ed by scaledEngine, make sure it is deallocated and not leaked.
@@ -2065,7 +2133,8 @@ void QTextEngine::justify(const QScriptLine &line)
         return;
 
     int firstItem = findItem(line.from);
-    int nItems = findItem(line.from + line_length - 1) - firstItem + 1;
+    int lastItem = findItem(line.from + line_length - 1);
+    int nItems = (firstItem >= 0 && lastItem >= firstItem)? (lastItem-firstItem+1) : 0;
 
     QVarLengthArray<QJustificationPoint> justificationPoints;
     int nPoints = 0;
@@ -2309,8 +2378,7 @@ bool QTextEngine::LayoutData::reallocate(int totalGlyphs)
         return false;
     }
 
-    void **newMem = memory;
-    newMem = (void **)::realloc(memory_on_stack ? 0 : memory, newAllocated*sizeof(void *));
+    void **newMem = (void **)::realloc(memory_on_stack ? 0 : memory, newAllocated*sizeof(void *));
     if (!newMem) {
         layoutState = LayoutFailed;
         return false;
@@ -2367,6 +2435,8 @@ void QTextEngine::freeMemory()
         layoutData->haveCharAttributes = false;
         layoutData->items.clear();
     }
+    if (specialData)
+        specialData->resolvedFormats.clear();
     for (int i = 0; i < lines.size(); ++i) {
         lines[i].justified = 0;
         lines[i].gridfitted = 0;
@@ -2376,7 +2446,7 @@ void QTextEngine::freeMemory()
 int QTextEngine::formatIndex(const QScriptItem *si) const
 {
     if (specialData && !specialData->resolvedFormats.isEmpty()) {
-        QTextFormatCollection *collection = formats();
+        QTextFormatCollection *collection = formatCollection();
         Q_ASSERT(collection);
         return collection->indexForFormat(specialData->resolvedFormats.at(si - &layoutData->items[0]));
     }
@@ -2398,16 +2468,16 @@ int QTextEngine::formatIndex(const QScriptItem *si) const
 
 QTextCharFormat QTextEngine::format(const QScriptItem *si) const
 {
-    if (const QTextFormatCollection *formats = this->formats())
-        return formats->charFormat(formatIndex(si));
+    if (const QTextFormatCollection *collection = formatCollection())
+        return collection->charFormat(formatIndex(si));
     return QTextCharFormat();
 }
 
 void QTextEngine::addRequiredBoundaries() const
 {
     if (specialData) {
-        for (int i = 0; i < specialData->addFormats.size(); ++i) {
-            const QTextLayout::FormatRange &r = specialData->addFormats.at(i);
+        for (int i = 0; i < specialData->formats.size(); ++i) {
+            const QTextLayout::FormatRange &r = specialData->formats.at(i);
             setBoundary(r.start);
             setBoundary(r.start + r.length);
             //qDebug("adding boundaries %d %d", r.start, r.start+r.length);
@@ -2477,7 +2547,7 @@ void QTextEngine::setPreeditArea(int position, const QString &preeditText)
     if (preeditText.isEmpty()) {
         if (!specialData)
             return;
-        if (specialData->addFormats.isEmpty()) {
+        if (specialData->formats.isEmpty()) {
             delete specialData;
             specialData = 0;
         } else {
@@ -2494,41 +2564,41 @@ void QTextEngine::setPreeditArea(int position, const QString &preeditText)
     clearLineData();
 }
 
-void QTextEngine::setAdditionalFormats(const QList<QTextLayout::FormatRange> &formatList)
+void QTextEngine::setFormats(const QList<QTextLayout::FormatRange> &formats)
 {
-    if (formatList.isEmpty()) {
+    if (formats.isEmpty()) {
         if (!specialData)
             return;
         if (specialData->preeditText.isEmpty()) {
             delete specialData;
             specialData = 0;
         } else {
-            specialData->addFormats.clear();
+            specialData->formats.clear();
         }
     } else {
         if (!specialData) {
             specialData = new SpecialData;
             specialData->preeditPosition = -1;
         }
-        specialData->addFormats = formatList;
-        indexAdditionalFormats();
+        specialData->formats = formats;
+        indexFormats();
     }
     invalidate();
     clearLineData();
 }
 
-void QTextEngine::indexAdditionalFormats()
+void QTextEngine::indexFormats()
 {
-    QTextFormatCollection *collection = formats();
+    QTextFormatCollection *collection = formatCollection();
     if (!collection) {
         Q_ASSERT(!block.docHandle());
-        specialData->formats.reset(new QTextFormatCollection);
-        collection = specialData->formats.data();
+        specialData->formatCollection.reset(new QTextFormatCollection);
+        collection = specialData->formatCollection.data();
     }
 
     // replace with shared copies
-    for (int i = 0; i < specialData->addFormats.count(); ++i) {
-        QTextCharFormat &format = specialData->addFormats[i].format;
+    for (int i = 0; i < specialData->formats.size(); ++i) {
+        QTextCharFormat &format = specialData->formats[i].format;
         format = collection->charFormat(collection->indexForFormat(format));
     }
 }
@@ -2756,64 +2826,17 @@ QString QTextEngine::elidedText(Qt::TextElideMode mode, const QFixed &width, int
     return layoutData->string.mid(from, to - from);
 }
 
-namespace {
-struct QScriptItemComparator {
-    bool operator()(int p, const QScriptItem &b) { return p < b.position; }
-#if defined(Q_CC_MSVC) && _MSC_VER < 1600
-//The STL implementation of MSVC 2008 requires the definition
-    bool operator()(const QScriptItem &a, int p) { return a.position < p; }
-    bool operator()(const QScriptItem &a, const QScriptItem &b) { return a.position < b.position; }
-#endif
-};
-}
-
 void QTextEngine::setBoundary(int strPos) const
 {
-    if (strPos <= 0 || strPos >= layoutData->string.length())
-        return;
-
-    const QScriptItem* it = std::upper_bound(layoutData->items.constBegin(), layoutData->items.constEnd(),
-                                             strPos, QScriptItemComparator());
-    Q_ASSERT(it > layoutData->items.constBegin());
-    --it;
-    if (it->position == strPos) {
-        // already a split at the requested position
-        return;
-    }
-    splitItem(it - layoutData->items.constBegin(), strPos - it->position);
-}
-
-void QTextEngine::splitItem(int item, int pos) const
-{
-    if (pos <= 0)
+    const int item = findItem(strPos);
+    if (item < 0)
         return;
 
-    layoutData->items.insert(item + 1, layoutData->items[item]);
-    QScriptItem &oldItem = layoutData->items[item];
-    QScriptItem &newItem = layoutData->items[item+1];
-    newItem.position += pos;
-
-    if (oldItem.num_glyphs) {
-        // already shaped, break glyphs aswell
-        int breakGlyph = logClusters(&oldItem)[pos];
-
-        newItem.num_glyphs = oldItem.num_glyphs - breakGlyph;
-        oldItem.num_glyphs = breakGlyph;
-        newItem.glyph_data_offset = oldItem.glyph_data_offset + breakGlyph;
-
-        for (int i = 0; i < newItem.num_glyphs; i++)
-            logClusters(&newItem)[i] -= breakGlyph;
-
-        QFixed w = 0;
-        const QGlyphLayout g = shapedGlyphs(&oldItem);
-        for(int j = 0; j < breakGlyph; ++j)
-            w += g.advances[j] * !g.attributes[j].dontPrint;
-
-        newItem.width = oldItem.width - w;
-        oldItem.width = w;
+    QScriptItem newItem = layoutData->items.at(item);
+    if (newItem.position != strPos) {
+        newItem.position = strPos;
+        layoutData->items.insert(item + 1, newItem);
     }
-
-//     qDebug("split at position %d itempos=%d", pos, item);
 }
 
 QFixed QTextEngine::calculateTabWidth(int item, QFixed x) const
@@ -2933,45 +2956,44 @@ public:
 };
 }
 
-void QTextEngine::resolveAdditionalFormats() const
+void QTextEngine::resolveFormats() const
 {
-    if (!specialData || specialData->addFormats.isEmpty()
-        || !specialData->resolvedFormats.isEmpty())
+    if (!specialData || specialData->formats.isEmpty())
         return;
+    Q_ASSERT(specialData->resolvedFormats.isEmpty());
 
-    QTextFormatCollection *collection = formats();
+    QTextFormatCollection *collection = formatCollection();
 
-    specialData->resolvedFormats.clear();
     QVector<QTextCharFormat> resolvedFormats(layoutData->items.count());
 
-    QVarLengthArray<int, 64> addFormatSortedByStart;
-    addFormatSortedByStart.reserve(specialData->addFormats.count());
-    for (int i = 0; i < specialData->addFormats.count(); ++i) {
-        if (specialData->addFormats.at(i).length >= 0)
-            addFormatSortedByStart.append(i);
+    QVarLengthArray<int, 64> formatsSortedByStart;
+    formatsSortedByStart.reserve(specialData->formats.size());
+    for (int i = 0; i < specialData->formats.size(); ++i) {
+        if (specialData->formats.at(i).length >= 0)
+            formatsSortedByStart.append(i);
     }
-    QVarLengthArray<int, 64> addFormatSortedByEnd = addFormatSortedByStart;
-    std::sort(addFormatSortedByStart.begin(), addFormatSortedByStart.end(),
-              FormatRangeComparatorByStart(specialData->addFormats));
-    std::sort(addFormatSortedByEnd.begin(), addFormatSortedByEnd.end(),
-              FormatRangeComparatorByEnd(specialData->addFormats));
+    QVarLengthArray<int, 64> formatsSortedByEnd = formatsSortedByStart;
+    std::sort(formatsSortedByStart.begin(), formatsSortedByStart.end(),
+              FormatRangeComparatorByStart(specialData->formats));
+    std::sort(formatsSortedByEnd.begin(), formatsSortedByEnd.end(),
+              FormatRangeComparatorByEnd(specialData->formats));
 
     QVarLengthArray<int, 16>  currentFormats;
-    const int *startIt = addFormatSortedByStart.constBegin();
-    const int *endIt = addFormatSortedByEnd.constBegin();
+    const int *startIt = formatsSortedByStart.constBegin();
+    const int *endIt = formatsSortedByEnd.constBegin();
 
     for (int i = 0; i < layoutData->items.count(); ++i) {
         const QScriptItem *si = &layoutData->items.at(i);
         int end = si->position + length(si);
 
-        while (startIt != addFormatSortedByStart.constEnd() &&
-            specialData->addFormats.at(*startIt).start <= si->position) {
+        while (startIt != formatsSortedByStart.constEnd() &&
+            specialData->formats.at(*startIt).start <= si->position) {
             currentFormats.insert(std::upper_bound(currentFormats.begin(), currentFormats.end(), *startIt),
                                   *startIt);
             ++startIt;
         }
-        while (endIt != addFormatSortedByEnd.constEnd() &&
-            specialData->addFormats.at(*endIt).start + specialData->addFormats.at(*endIt).length < end) {
+        while (endIt != formatsSortedByEnd.constEnd() &&
+            specialData->formats.at(*endIt).start + specialData->formats.at(*endIt).length < end) {
             int *currentFormatIterator = std::lower_bound(currentFormats.begin(), currentFormats.end(), *endIt);
             if (*endIt < *currentFormatIterator)
                 currentFormatIterator = currentFormats.end();
@@ -2987,7 +3009,7 @@ void QTextEngine::resolveAdditionalFormats() const
         }
         if (!currentFormats.isEmpty()) {
             foreach (int cur, currentFormats) {
-                const QTextLayout::FormatRange &range = specialData->addFormats.at(cur);
+                const QTextLayout::FormatRange &range = specialData->formats.at(cur);
                 Q_ASSERT(range.start <= si->position && range.start + range.length >= end);
                 format.merge(range.format);
             }
@@ -3487,15 +3509,15 @@ QTextLineItemIterator::QTextLineItemIterator(QTextEngine *_eng, int _lineNum, co
       logicalItem(-1),
       item(-1),
       visualOrder(nItems),
-      levels(nItems),
       selection(_selection)
 {
-    pos_x = x = QFixed::fromReal(pos.x());
+    x = QFixed::fromReal(pos.x());
 
     x += line.x;
 
     x += eng->alignLine(line);
 
+    QVarLengthArray<uchar> levels(nItems);
     for (int i = 0; i < nItems; ++i)
         levels[i] = eng->layoutData->items[i+firstItem].analysis.bidiLevel;
     QTextEngine::bidiReorder(nItems, levels.data(), visualOrder.data());
@@ -3566,7 +3588,7 @@ bool QTextLineItemIterator::getSelectionBounds(QFixed *selectionX, QFixed *selec
             return false;
 
         int start_glyph = logClusters[from];
-        int end_glyph = (to == eng->length(item)) ? si->num_glyphs : logClusters[to];
+        int end_glyph = (to == itemLength) ? si->num_glyphs : logClusters[to];
         QFixed soff;
         QFixed swidth;
         if (si->analysis.bidiLevel %2) {
@@ -3591,7 +3613,7 @@ bool QTextLineItemIterator::getSelectionBounds(QFixed *selectionX, QFixed *selec
         // If the ending character is also part of a ligature, swidth does
         // not contain that part yet, we also need to find out the width of
         // that left part
-        *selectionWidth += eng->offsetInLigature(si, to, eng->length(item), end_glyph);
+        *selectionWidth += eng->offsetInLigature(si, to, itemLength, end_glyph);
     }
     return true;
 }
diff --git a/src/gui/text/qtextengine_p.h b/src/gui/text/qtextengine_p.h
index 342a94de66..ac7015639b 100644
--- a/src/gui/text/qtextengine_p.h
+++ b/src/gui/text/qtextengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -505,10 +497,10 @@ public:
     void freeMemory();
 
     int findItem(int strPos) const;
-    inline QTextFormatCollection *formats() const {
+    inline QTextFormatCollection *formatCollection() const {
         if (block.docHandle())
             return block.docHandle()->formatCollection();
-        return specialData ? specialData->formats.data() : 0;
+        return specialData ? specialData->formatCollection.data() : 0;
     }
     QTextCharFormat format(const QScriptItem *si) const;
     inline QAbstractTextDocumentLayout *docLayout() const {
@@ -563,8 +555,6 @@ public:
     uint useRawFont : 1;
 #endif
 
-    int *underlinePositions;
-
     mutable LayoutData *layoutData;
 
     ItemDecorationList underlineList;
@@ -572,19 +562,17 @@ public:
     ItemDecorationList overlineList;
 
     inline bool visualCursorMovement() const
-    {
-        return (visualMovement ||
-                (block.docHandle() ? block.docHandle()->defaultCursorMoveStyle == Qt::VisualMoveStyle : false));
-    }
+    { return visualMovement || (block.docHandle() && block.docHandle()->defaultCursorMoveStyle == Qt::VisualMoveStyle); }
 
     inline int preeditAreaPosition() const { return specialData ? specialData->preeditPosition : -1; }
     inline QString preeditAreaText() const { return specialData ? specialData->preeditText : QString(); }
     void setPreeditArea(int position, const QString &text);
 
-    inline bool hasFormats() const { return block.docHandle() || (specialData && !specialData->addFormats.isEmpty()); }
-    inline QList<QTextLayout::FormatRange> additionalFormats() const
-    { return specialData ? specialData->addFormats : QList<QTextLayout::FormatRange>(); }
-    void setAdditionalFormats(const QList<QTextLayout::FormatRange> &formatList);
+    inline bool hasFormats() const
+    { return block.docHandle() || (specialData && !specialData->formats.isEmpty()); }
+    inline QList<QTextLayout::FormatRange> formats() const
+    { return specialData ? specialData->formats : QList<QTextLayout::FormatRange>(); }
+    void setFormats(const QList<QTextLayout::FormatRange> &formats);
 
 private:
     static void init(QTextEngine *e);
@@ -592,15 +580,15 @@ private:
     struct SpecialData {
         int preeditPosition;
         QString preeditText;
-        QList<QTextLayout::FormatRange> addFormats;
+        QList<QTextLayout::FormatRange> formats;
         QVector<QTextCharFormat> resolvedFormats;
         // only used when no docHandle is available
-        QScopedPointer<QTextFormatCollection> formats;
+        QScopedPointer<QTextFormatCollection> formatCollection;
     };
     SpecialData *specialData;
 
-    void indexAdditionalFormats();
-    void resolveAdditionalFormats() const;
+    void indexFormats();
+    void resolveFormats() const;
 
 public:
     bool atWordSeparator(int position) const;
@@ -643,7 +631,6 @@ private:
     int shapeTextWithHarfbuzzNG(const QScriptItem &si, const ushort *string, int itemLength, QFontEngine *fontEngine, const QVector<uint> &itemBoundaries, bool kerningEnabled) const;
 #endif
     int shapeTextWithHarfbuzz(const QScriptItem &si, const ushort *string, int itemLength, QFontEngine *fontEngine, const QVector<uint> &itemBoundaries, bool kerningEnabled) const;
-    void splitItem(int item, int pos) const;
 
     int endOfLine(int lineNum);
     int beginningOfLine(int lineNum);
@@ -676,15 +663,14 @@ struct QTextLineItemIterator
     QTextEngine *eng;
 
     QFixed x;
-    QFixed pos_x;
     const QScriptLine &line;
     QScriptItem *si;
 
-    int lineNum;
-    int lineEnd;
-    int firstItem;
-    int lastItem;
-    int nItems;
+    const int lineNum;
+    const int lineEnd;
+    const int firstItem;
+    const int lastItem;
+    const int nItems;
     int logicalItem;
     int item;
     int itemLength;
@@ -697,7 +683,6 @@ struct QTextLineItemIterator
     QFixed itemWidth;
 
     QVarLengthArray<int> visualOrder;
-    QVarLengthArray<uchar> levels;
 
     const QTextLayout::FormatRange *selection;
 };
diff --git a/src/gui/text/qtextformat.cpp b/src/gui/text/qtextformat.cpp
index 4854af0d01..cecfd85df1 100644
--- a/src/gui/text/qtextformat.cpp
+++ b/src/gui/text/qtextformat.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextformat.h b/src/gui/text/qtextformat.h
index 5369001a03..94c5b83cc0 100644
--- a/src/gui/text/qtextformat.h
+++ b/src/gui/text/qtextformat.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextformat_p.h b/src/gui/text/qtextformat_p.h
index e3998d4f3f..72cd56cbbb 100644
--- a/src/gui/text/qtextformat_p.h
+++ b/src/gui/text/qtextformat_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtexthtmlparser.cpp b/src/gui/text/qtexthtmlparser.cpp
index e8a02c44b2..e1a7781722 100644
--- a/src/gui/text/qtexthtmlparser.cpp
+++ b/src/gui/text/qtexthtmlparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtexthtmlparser_p.h b/src/gui/text/qtexthtmlparser_p.h
index e223f2fa6f..976a1a918c 100644
--- a/src/gui/text/qtexthtmlparser_p.h
+++ b/src/gui/text/qtexthtmlparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextimagehandler.cpp b/src/gui/text/qtextimagehandler.cpp
index 02a1091506..f6525448de 100644
--- a/src/gui/text/qtextimagehandler.cpp
+++ b/src/gui/text/qtextimagehandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextimagehandler_p.h b/src/gui/text/qtextimagehandler_p.h
index b7de5a30b9..c986c81f8b 100644
--- a/src/gui/text/qtextimagehandler_p.h
+++ b/src/gui/text/qtextimagehandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextlayout.cpp b/src/gui/text/qtextlayout.cpp
index 8e605e4ae1..eafd98d234 100644
--- a/src/gui/text/qtextlayout.cpp
+++ b/src/gui/text/qtextlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -100,14 +92,11 @@ QT_BEGIN_NAMESPACE
     \reentrant
 
     \brief The QTextInlineObject class represents an inline object in
-    a QTextLayout.
+    a QAbstractTextDocumentLayout and its implementations.
     \inmodule QtGui
 
     \ingroup richtext-processing
 
-    This class is only used if the text layout is used to lay out
-    parts of a QTextDocument.
-
     Normally, you do not need to create a QTextInlineObject. It is
     used by QAbstractTextDocumentLayout to handle inline objects when
     implementing a custom layout.
@@ -115,8 +104,8 @@ QT_BEGIN_NAMESPACE
     The inline object has various attributes that can be set, for
     example using, setWidth(), setAscent(), and setDescent(). The
     rectangle it occupies is given by rect(), and its direction by
-    isRightToLeft(). Its position in the text layout is given by at(),
-    and its format is given by format().
+    textDirection(). Its position in the text layout is given by
+    textPosition(), and its format is given by format().
 */
 
 /*!
@@ -505,7 +494,7 @@ QString QTextLayout::preeditAreaText() const
 */
 void QTextLayout::setAdditionalFormats(const QList<FormatRange> &formatList)
 {
-    d->setAdditionalFormats(formatList);
+    d->setFormats(formatList);
 
     if (d->block.docHandle())
         d->block.docHandle()->documentChange(d->block.position(), d->block.length());
@@ -518,7 +507,7 @@ void QTextLayout::setAdditionalFormats(const QList<FormatRange> &formatList)
 */
 QList<QTextLayout::FormatRange> QTextLayout::additionalFormats() const
 {
-    return d->additionalFormats();
+    return d->formats();
 }
 
 /*!
@@ -567,7 +556,7 @@ bool QTextLayout::cacheEnabled() const
 */
 void QTextLayout::setCursorMoveStyle(Qt::CursorMoveStyle style)
 {
-    d->visualMovement = style == Qt::VisualMoveStyle ? true : false;
+    d->visualMovement = style == Qt::VisualMoveStyle;
 }
 
 /*!
@@ -1735,6 +1724,7 @@ void QTextLine::layout_helper(int maxGlyphs)
 
     int item = -1;
     int newItem = eng->findItem(line.from);
+    Q_ASSERT(newItem >= 0);
 
     LB_DEBUG("from: %d: item=%d, total %d, width available %f", line.from, newItem, eng->layoutData->items.size(), line.width.toReal());
 
@@ -2020,79 +2010,6 @@ int QTextLine::textLength() const
     return eng->lines[index].length + eng->lines[index].trailingSpaces;
 }
 
-static void drawMenuText(QPainter *p, QFixed x, QFixed y, const QScriptItem &si, QTextItemInt &gf, QTextEngine *eng,
-                         int start, int glyph_start)
-{
-    int ge = glyph_start + gf.glyphs.numGlyphs;
-    int gs = glyph_start;
-    int end = start + gf.num_chars;
-    unsigned short *logClusters = eng->logClusters(&si);
-    QGlyphLayout glyphs = eng->shapedGlyphs(&si);
-    QFixed orig_width = gf.width;
-
-    int *ul = eng->underlinePositions;
-    if (ul)
-        while (*ul != -1 && *ul < start)
-            ++ul;
-    bool rtl = si.analysis.bidiLevel % 2;
-    if (rtl)
-        x += si.width;
-
-    do {
-        int gtmp = ge;
-        int stmp = end;
-        if (ul && *ul != -1 && *ul < end) {
-            stmp = *ul;
-            gtmp = logClusters[*ul-si.position];
-        }
-
-        gf.glyphs = glyphs.mid(gs, gtmp - gs);
-        gf.num_chars = stmp - start;
-        gf.chars = eng->layoutData->string.unicode() + start;
-        QFixed w = 0;
-        while (gs < gtmp) {
-            w += glyphs.effectiveAdvance(gs);
-            ++gs;
-        }
-        start = stmp;
-        gf.width = w;
-        if (rtl)
-            x -= w;
-        if (gf.num_chars)
-            QPainterPrivate::get(p)->drawTextItem(QPointF(x.toReal(), y.toReal()), gf, eng);
-        if (!rtl)
-            x += w;
-        if (ul && *ul != -1 && *ul < end) {
-            // draw underline
-            gtmp = (*ul == end-1) ? ge : logClusters[*ul+1-si.position];
-            ++stmp;
-            gf.glyphs = glyphs.mid(gs, gtmp - gs);
-            gf.num_chars = stmp - start;
-            gf.chars = eng->layoutData->string.unicode() + start;
-            gf.logClusters = logClusters + start - si.position;
-            w = 0;
-            while (gs < gtmp) {
-                w += glyphs.effectiveAdvance(gs);
-                ++gs;
-            }
-            ++start;
-            gf.width = w;
-            gf.underlineStyle = QTextCharFormat::SingleUnderline;
-            if (rtl)
-                x -= w;
-            QPainterPrivate::get(p)->drawTextItem(QPointF(x.toReal(), y.toReal()), gf, eng);
-            if (!rtl)
-                x += w;
-            gf.underlineStyle = QTextCharFormat::NoUnderline;
-            ++gf.chars;
-            ++ul;
-        }
-    } while (gs < ge);
-
-    gf.width = orig_width;
-}
-
-
 static void setPenAndDrawBackground(QPainter *p, const QPen &defaultPen, const QTextCharFormat &chf, const QRectF &r)
 {
     QBrush c = chf.foreground();
@@ -2212,14 +2129,10 @@ QList<QGlyphRun> QTextLine::glyphRuns(int from, int length) const
         if (si.analysis.flags >= QScriptAnalysis::TabOrObject)
             continue;
 
-        QPointF pos(iterator.x.toReal(), y);
-        if (from >= 0 && length >= 0 &&
-            (from >= si.position + eng->length(&si)
-             || from + length <= si.position
-             || from + length <= iterator.itemStart
-             || from >= iterator.itemEnd)) {
+        if (from >= 0 && length >= 0 && (from >= iterator.itemEnd || from + length <= iterator.itemStart))
             continue;
-        }
+
+        QPointF pos(iterator.x.toReal(), y);
 
         QFont font;
         QGlyphRun::GlyphRunFlags flags;
@@ -2240,15 +2153,13 @@ QList<QGlyphRun> QTextLine::glyphRuns(int from, int length) const
         }
 
         int relativeFrom = qMax(iterator.itemStart, from) - si.position;
-        int relativeTo = qMin(iterator.itemEnd - 1, from + length - 1) - si.position;
+        int relativeTo = qMin(iterator.itemEnd, from + length) - 1 - si.position;
 
         unsigned short *logClusters = eng->logClusters(&si);
         int glyphsStart = logClusters[relativeFrom];
-        int glyphsEnd = (relativeTo == eng->length(&si))
-                         ? si.num_glyphs - 1
-                         : logClusters[relativeTo];
+        int glyphsEnd = (relativeTo == iterator.itemLength) ? si.num_glyphs - 1 : logClusters[relativeTo];
         // the glyph index right next to the requested range
-        int nextGlyphIndex = relativeTo < eng->length(&si) - 1 ? logClusters[relativeTo + 1] : si.num_glyphs;
+        int nextGlyphIndex = (relativeTo < iterator.itemLength - 1) ? logClusters[relativeTo + 1] : si.num_glyphs;
         if (nextGlyphIndex - 1 > glyphsEnd)
             glyphsEnd = nextGlyphIndex - 1;
         bool startsInsideLigature = relativeFrom > 0 && logClusters[relativeFrom - 1] == glyphsStart;
@@ -2488,52 +2399,48 @@ void QTextLine::draw(QPainter *p, const QPointF &pos, const QTextLayout::FormatR
 
         Q_ASSERT(gf.fontEngine);
 
-        if (eng->underlinePositions) {
-            // can't have selections in this case
-            drawMenuText(p, iterator.x, itemBaseLine, si, gf, eng, iterator.itemStart, iterator.glyphsStart);
-        } else {
-            QPointF pos(iterator.x.toReal(), itemBaseLine.toReal());
-            if (format.penProperty(QTextFormat::TextOutline).style() != Qt::NoPen) {
-                QPainterPath path;
-                path.setFillRule(Qt::WindingFill);
-
-                if (gf.glyphs.numGlyphs)
-                    gf.fontEngine->addOutlineToPath(pos.x(), pos.y(), gf.glyphs, &path, gf.flags);
-                if (gf.flags) {
-                    const QFontEngine *fe = gf.fontEngine;
-                    const qreal lw = fe->lineThickness().toReal();
-                    if (gf.flags & QTextItem::Underline) {
-                        qreal offs = fe->underlinePosition().toReal();
-                        path.addRect(pos.x(), pos.y() + offs, gf.width.toReal(), lw);
-                    }
-                    if (gf.flags & QTextItem::Overline) {
-                        qreal offs = fe->ascent().toReal() + 1;
-                        path.addRect(pos.x(), pos.y() - offs, gf.width.toReal(), lw);
-                    }
-                    if (gf.flags & QTextItem::StrikeOut) {
-                        qreal offs = fe->ascent().toReal() / 3;
-                        path.addRect(pos.x(), pos.y() - offs, gf.width.toReal(), lw);
-                    }
+        QPointF pos(iterator.x.toReal(), itemBaseLine.toReal());
+        if (format.penProperty(QTextFormat::TextOutline).style() != Qt::NoPen) {
+            QPainterPath path;
+            path.setFillRule(Qt::WindingFill);
+
+            if (gf.glyphs.numGlyphs)
+                gf.fontEngine->addOutlineToPath(pos.x(), pos.y(), gf.glyphs, &path, gf.flags);
+            if (gf.flags) {
+                const QFontEngine *fe = gf.fontEngine;
+                const qreal lw = fe->lineThickness().toReal();
+                if (gf.flags & QTextItem::Underline) {
+                    qreal offs = fe->underlinePosition().toReal();
+                    path.addRect(pos.x(), pos.y() + offs, gf.width.toReal(), lw);
+                }
+                if (gf.flags & QTextItem::Overline) {
+                    qreal offs = fe->ascent().toReal() + 1;
+                    path.addRect(pos.x(), pos.y() - offs, gf.width.toReal(), lw);
+                }
+                if (gf.flags & QTextItem::StrikeOut) {
+                    qreal offs = fe->ascent().toReal() / 3;
+                    path.addRect(pos.x(), pos.y() - offs, gf.width.toReal(), lw);
                 }
-
-                p->save();
-                p->setRenderHint(QPainter::Antialiasing);
-                //Currently QPen with a Qt::NoPen style still returns a default
-                //QBrush which != Qt::NoBrush so we need this specialcase to reset it
-                if (p->pen().style() == Qt::NoPen)
-                    p->setBrush(Qt::NoBrush);
-                else
-                    p->setBrush(p->pen().brush());
-
-                p->setPen(format.textOutline());
-                p->drawPath(path);
-                p->restore();
-            } else {
-                if (noText)
-                    gf.glyphs.numGlyphs = 0; // slightly less elegant than it should be
-                QPainterPrivate::get(p)->drawTextItem(pos, gf, eng);
             }
+
+            p->save();
+            p->setRenderHint(QPainter::Antialiasing);
+            //Currently QPen with a Qt::NoPen style still returns a default
+            //QBrush which != Qt::NoBrush so we need this specialcase to reset it
+            if (p->pen().style() == Qt::NoPen)
+                p->setBrush(Qt::NoBrush);
+            else
+                p->setBrush(p->pen().brush());
+
+            p->setPen(format.textOutline());
+            p->drawPath(path);
+            p->restore();
+        } else {
+            if (noText)
+                gf.glyphs.numGlyphs = 0; // slightly less elegant than it should be
+            QPainterPrivate::get(p)->drawTextItem(pos, gf, eng);
         }
+
         if (si.analysis.flags == QScriptAnalysis::Space
             && (eng->option.flags() & QTextOption::ShowTabsAndSpaces)) {
             QBrush c = format.foreground();
diff --git a/src/gui/text/qtextlayout.h b/src/gui/text/qtextlayout.h
index cbe42c3844..1e0ab9b5c9 100644
--- a/src/gui/text/qtextlayout.h
+++ b/src/gui/text/qtextlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextlist.cpp b/src/gui/text/qtextlist.cpp
index 15c16f1ec0..13da035043 100644
--- a/src/gui/text/qtextlist.cpp
+++ b/src/gui/text/qtextlist.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextlist.h b/src/gui/text/qtextlist.h
index 1fcc99d963..61f4885e42 100644
--- a/src/gui/text/qtextlist.h
+++ b/src/gui/text/qtextlist.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextobject.cpp b/src/gui/text/qtextobject.cpp
index c0342c0d4e..d155e31f31 100644
--- a/src/gui/text/qtextobject.cpp
+++ b/src/gui/text/qtextobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextobject.h b/src/gui/text/qtextobject.h
index 8138854348..5a0e2c60a6 100644
--- a/src/gui/text/qtextobject.h
+++ b/src/gui/text/qtextobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextobject_p.h b/src/gui/text/qtextobject_p.h
index fa7d7832cf..16a8164464 100644
--- a/src/gui/text/qtextobject_p.h
+++ b/src/gui/text/qtextobject_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextodfwriter.cpp b/src/gui/text/qtextodfwriter.cpp
index 1572648d7f..ef7bbb44ff 100644
--- a/src/gui/text/qtextodfwriter.cpp
+++ b/src/gui/text/qtextodfwriter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextodfwriter_p.h b/src/gui/text/qtextodfwriter_p.h
index 6683e1eed9..5c06511c14 100644
--- a/src/gui/text/qtextodfwriter_p.h
+++ b/src/gui/text/qtextodfwriter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextoption.cpp b/src/gui/text/qtextoption.cpp
index 836e85889e..dc38b1a105 100644
--- a/src/gui/text/qtextoption.cpp
+++ b/src/gui/text/qtextoption.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtextoption.h b/src/gui/text/qtextoption.h
index 3c76768f87..694adc5cb9 100644
--- a/src/gui/text/qtextoption.h
+++ b/src/gui/text/qtextoption.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtexttable.cpp b/src/gui/text/qtexttable.cpp
index 045fe7f957..c2cc822ad6 100644
--- a/src/gui/text/qtexttable.cpp
+++ b/src/gui/text/qtexttable.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtexttable.h b/src/gui/text/qtexttable.h
index 9da205af7f..5d2467e3a0 100644
--- a/src/gui/text/qtexttable.h
+++ b/src/gui/text/qtexttable.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qtexttable_p.h b/src/gui/text/qtexttable_p.h
index 4e5f5be9a1..0459242ae9 100644
--- a/src/gui/text/qtexttable_p.h
+++ b/src/gui/text/qtexttable_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qzip.cpp b/src/gui/text/qzip.cpp
index dee56d18f7..90db029a12 100644
--- a/src/gui/text/qzip.cpp
+++ b/src/gui/text/qzip.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qzipreader_p.h b/src/gui/text/qzipreader_p.h
index b641689e47..c950c2505a 100644
--- a/src/gui/text/qzipreader_p.h
+++ b/src/gui/text/qzipreader_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/qzipwriter_p.h b/src/gui/text/qzipwriter_p.h
index e6a19e22e4..e4e4e7fa37 100644
--- a/src/gui/text/qzipwriter_p.h
+++ b/src/gui/text/qzipwriter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/text/text.pri b/src/gui/text/text.pri
index c67769ad48..091129f5be 100644
--- a/src/gui/text/text.pri
+++ b/src/gui/text/text.pri
@@ -77,10 +77,8 @@ SOURCES += \
     text/qdistancefield.cpp
 
 SOURCES += \
-    text/qfont_qpa.cpp \
-    text/qfontengine_qpa.cpp \
-    text/qplatformfontdatabase.cpp \
-    text/qrawfont_qpa.cpp
+    text/qfontengine_qpf2.cpp \
+    text/qplatformfontdatabase.cpp
 
 HEADERS += \
     text/qplatformfontdatabase.h
diff --git a/src/gui/util/qabstractlayoutstyleinfo.cpp b/src/gui/util/qabstractlayoutstyleinfo.cpp
index 4f7c635594..4338a0ccbf 100644
--- a/src/gui/util/qabstractlayoutstyleinfo.cpp
+++ b/src/gui/util/qabstractlayoutstyleinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/util/qabstractlayoutstyleinfo_p.h b/src/gui/util/qabstractlayoutstyleinfo_p.h
index b0f901d0ac..3479c47c4e 100644
--- a/src/gui/util/qabstractlayoutstyleinfo_p.h
+++ b/src/gui/util/qabstractlayoutstyleinfo_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/util/qdesktopservices.cpp b/src/gui/util/qdesktopservices.cpp
index 87146118db..eec9272aa1 100644
--- a/src/gui/util/qdesktopservices.cpp
+++ b/src/gui/util/qdesktopservices.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -314,7 +306,7 @@ extern Q_CORE_EXPORT QString qt_applicationName_noFallback();
 
 QString QDesktopServices::storageLocationImpl(QStandardPaths::StandardLocation type)
 {
-    if (type == QStandardPaths::DataLocation) {
+    if (type == QStandardPaths::AppLocalDataLocation) {
         // Preserve Qt 4 compatibility:
         // * QCoreApplication::applicationName() must default to empty
         // * Unix data location is under the "data/" subdirectory
diff --git a/src/gui/util/qdesktopservices.h b/src/gui/util/qdesktopservices.h
index 9b1d71052c..ca29175792 100644
--- a/src/gui/util/qdesktopservices.h
+++ b/src/gui/util/qdesktopservices.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/util/qgridlayoutengine.cpp b/src/gui/util/qgridlayoutengine.cpp
index 10b4a2ee35..ed15e460f3 100644
--- a/src/gui/util/qgridlayoutengine.cpp
+++ b/src/gui/util/qgridlayoutengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -983,9 +975,10 @@ void QGridLayoutEngine::invalidate()
     q_cachedEffectiveFirstRows[Ver] = -1;
     q_cachedEffectiveLastRows[Hor] = -1;
     q_cachedEffectiveLastRows[Ver] = -1;
-    q_totalBoxesValid = false;
-    q_sizeHintValid[Hor] = false;
-    q_sizeHintValid[Ver] = false;
+
+    q_totalBoxCachedConstraints[Hor] = NotCached;
+    q_totalBoxCachedConstraints[Ver] = NotCached;
+
     q_cachedSize = QSizeF();
     q_cachedConstraintOrientation = UnknownConstraint;
 }
@@ -1530,7 +1523,11 @@ void QGridLayoutEngine::ensureColumnAndRowData(QGridLayoutRowData *rowData, QGri
                                                const QAbstractLayoutStyleInfo *styleInfo) const
 {
     const int o = (orientation == Qt::Vertical ? Ver : Hor);
-    if (q_sizeHintValid[o] && !colPositions && !colSizes) {
+    const int cc = columnCount(orientation);
+
+    const qreal constraint = (colPositions && colSizes && hasDynamicConstraint()) ? (colPositions[cc - 1] + colSizes[cc - 1]) : qreal(CachedWithNoConstraint);
+    qreal &cachedConstraint = q_totalBoxCachedConstraints[o];
+    if (cachedConstraint == constraint) {
         if (totalBox != &q_totalBoxes[o])
             *totalBox = q_totalBoxes[o];
          return;
@@ -1541,10 +1538,10 @@ void QGridLayoutEngine::ensureColumnAndRowData(QGridLayoutRowData *rowData, QGri
     rowData->distributeMultiCells(rowInfo);
     *totalBox = rowData->totalBox(0, rowCount(orientation));
 
-    if (!colPositions && !colSizes) {
+    if (totalBox != &q_totalBoxes[o])
         q_totalBoxes[o] = *totalBox;
-        q_sizeHintValid[o] = true;
-    }
+
+    cachedConstraint = constraint;
 }
 
 /**
@@ -1593,10 +1590,9 @@ Qt::Orientation QGridLayoutEngine::constraintOrientation() const
 void QGridLayoutEngine::ensureGeometries(const QSizeF &size,
                                          const QAbstractLayoutStyleInfo *styleInfo) const
 {
-    if (!styleInfo->hasChanged() && q_totalBoxesValid && q_cachedSize == size)
+    if (!styleInfo->hasChanged() && q_cachedSize == size)
         return;
 
-    q_totalBoxesValid = true;
     q_cachedSize = size;
 
     q_xx.resize(columnCount());
@@ -1606,7 +1602,7 @@ void QGridLayoutEngine::ensureGeometries(const QSizeF &size,
     q_descents.resize(rowCount());
 
     if (constraintOrientation() != Qt::Horizontal) {
-        //We might have items whose width depends on their height
+        //We might have items whose height depends on their width (HFW)
         ensureColumnAndRowData(&q_columnData, &q_totalBoxes[Hor], NULL, NULL, Qt::Horizontal, styleInfo);
         //Calculate column widths and positions, and put results in q_xx.data() and q_widths.data() so that we can use this information as
         //constraints to find the row heights
@@ -1617,7 +1613,7 @@ void QGridLayoutEngine::ensureGeometries(const QSizeF &size,
         q_rowData.calculateGeometries(0, rowCount(), size.height(), q_yy.data(), q_heights.data(),
                 q_descents.data(), q_totalBoxes[Ver], q_infos[Ver]);
     } else {
-        //We have items whose height depends on their width
+        //We have items whose width depends on their height (WFH)
         ensureColumnAndRowData(&q_rowData, &q_totalBoxes[Ver], NULL, NULL, Qt::Vertical, styleInfo);
         //Calculate row heights and positions, and put results in q_yy.data() and q_heights.data() so that we can use this information as
         //constraints to find the column widths
diff --git a/src/gui/util/qgridlayoutengine_p.h b/src/gui/util/qgridlayoutengine_p.h
index 9650e7fffe..bf34e816b5 100644
--- a/src/gui/util/qgridlayoutengine_p.h
+++ b/src/gui/util/qgridlayoutengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -450,15 +442,21 @@ private:
     mutable int q_cachedEffectiveLastRows[NOrientations];
     mutable quint8 q_cachedConstraintOrientation : 3;
 
+    // this is useful to cache
+    mutable QGridLayoutBox q_totalBoxes[NOrientations];
+    enum {
+        NotCached = -2,             // Cache is empty. Happens when the engine is invalidated.
+        CachedWithNoConstraint = -1 // cache has a totalBox without any HFW/WFH constraints.
+        // >= 0                     // cache has a totalBox with this specific constraint.
+    };
+    mutable qreal q_totalBoxCachedConstraints[NOrientations];   // holds the constraint used for the cached totalBox
+
     // Layout item input
     mutable QGridLayoutRowData q_columnData;
     mutable QGridLayoutRowData q_rowData;
-    mutable QGridLayoutBox q_totalBoxes[NOrientations];
 
     // Output
     mutable QSizeF q_cachedSize;
-    mutable bool q_totalBoxesValid;
-    mutable bool q_sizeHintValid[NOrientations];
     mutable QVector<qreal> q_xx;
     mutable QVector<qreal> q_yy;
     mutable QVector<qreal> q_widths;
diff --git a/src/gui/util/qhexstring_p.h b/src/gui/util/qhexstring_p.h
index 5f54f05e91..8ffad4a7f2 100644
--- a/src/gui/util/qhexstring_p.h
+++ b/src/gui/util/qhexstring_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/util/qlayoutpolicy.cpp b/src/gui/util/qlayoutpolicy.cpp
index 9a154768eb..a7f2515164 100644
--- a/src/gui/util/qlayoutpolicy.cpp
+++ b/src/gui/util/qlayoutpolicy.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Quick Layouts module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/util/qlayoutpolicy_p.h b/src/gui/util/qlayoutpolicy_p.h
index 2d98bcd84c..22c7ad10ef 100644
--- a/src/gui/util/qlayoutpolicy_p.h
+++ b/src/gui/util/qlayoutpolicy_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Quick Layouts module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/gui/util/qvalidator.cpp b/src/gui/util/qvalidator.cpp
index dbb8575397..1b5a10f733 100644
--- a/src/gui/util/qvalidator.cpp
+++ b/src/gui/util/qvalidator.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -314,7 +306,7 @@ void QValidator::fixup(QString &) const
     Notice that the value \c 999 returns Intermediate. Values
     consisting of a number of digits equal to or less than the max
     value are considered intermediate. This is intended because the
-    digit that prevents a number to be in range is not necessarily the
+    digit that prevents a number from being in range is not necessarily the
     last digit typed. This also means that an intermediate number can
     have leading zeros.
 
diff --git a/src/gui/util/qvalidator.h b/src/gui/util/qvalidator.h
index 386af1bc74..f09c349ac8 100644
--- a/src/gui/util/qvalidator.h
+++ b/src/gui/util/qvalidator.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qabstractnetworkcache.cpp b/src/network/access/qabstractnetworkcache.cpp
index 01a5d5d4e1..608e31d2ef 100644
--- a/src/network/access/qabstractnetworkcache.cpp
+++ b/src/network/access/qabstractnetworkcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qabstractnetworkcache.h b/src/network/access/qabstractnetworkcache.h
index b9a086f047..b563090fe2 100644
--- a/src/network/access/qabstractnetworkcache.h
+++ b/src/network/access/qabstractnetworkcache.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qabstractnetworkcache_p.h b/src/network/access/qabstractnetworkcache_p.h
index ac4c3e7098..5141afc5c1 100644
--- a/src/network/access/qabstractnetworkcache_p.h
+++ b/src/network/access/qabstractnetworkcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qabstractprotocolhandler.cpp b/src/network/access/qabstractprotocolhandler.cpp
index e72bb63236..69f5f9bb4b 100644
--- a/src/network/access/qabstractprotocolhandler.cpp
+++ b/src/network/access/qabstractprotocolhandler.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qabstractprotocolhandler_p.h b/src/network/access/qabstractprotocolhandler_p.h
index 387d08ccac..4261c73c76 100644
--- a/src/network/access/qabstractprotocolhandler_p.h
+++ b/src/network/access/qabstractprotocolhandler_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qftp.cpp b/src/network/access/qftp.cpp
index 3b0d0deeb9..cb84905bc5 100644
--- a/src/network/access/qftp.cpp
+++ b/src/network/access/qftp.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qftp_p.h b/src/network/access/qftp_p.h
index ee5d124650..b88583d37b 100644
--- a/src/network/access/qftp_p.h
+++ b/src/network/access/qftp_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpmultipart.cpp b/src/network/access/qhttpmultipart.cpp
index e8dfa636cd..4e461b62a6 100644
--- a/src/network/access/qhttpmultipart.cpp
+++ b/src/network/access/qhttpmultipart.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpmultipart.h b/src/network/access/qhttpmultipart.h
index 71075ad2f3..769b1fc7a4 100644
--- a/src/network/access/qhttpmultipart.h
+++ b/src/network/access/qhttpmultipart.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpmultipart_p.h b/src/network/access/qhttpmultipart_p.h
index ab60975cb7..f00883afd0 100644
--- a/src/network/access/qhttpmultipart_p.h
+++ b/src/network/access/qhttpmultipart_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkconnection.cpp b/src/network/access/qhttpnetworkconnection.cpp
index 360f9722c7..365ce55f2b 100644
--- a/src/network/access/qhttpnetworkconnection.cpp
+++ b/src/network/access/qhttpnetworkconnection.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1203,7 +1195,7 @@ QHttpNetworkConnection::QHttpNetworkConnection(const QString &hostName, quint16
     : QObject(*(new QHttpNetworkConnectionPrivate(hostName, port, encrypt, connectionType)), parent)
 {
     Q_D(QHttpNetworkConnection);
-    d->networkSession = networkSession;
+    d->networkSession = qMove(networkSession);
     d->init();
 }
 
@@ -1215,7 +1207,7 @@ QHttpNetworkConnection::QHttpNetworkConnection(quint16 connectionCount, const QS
                                                    connectionType)), parent)
 {
     Q_D(QHttpNetworkConnection);
-    d->networkSession = networkSession;
+    d->networkSession = qMove(networkSession);
     d->init();
 }
 #else
@@ -1339,7 +1331,7 @@ QSharedPointer<QSslContext> QHttpNetworkConnection::sslContext()
 void QHttpNetworkConnection::setSslContext(QSharedPointer<QSslContext> context)
 {
     Q_D(QHttpNetworkConnection);
-    d->sslContext = context;
+    d->sslContext = qMove(context);
 }
 
 void QHttpNetworkConnection::ignoreSslErrors(int channel)
diff --git a/src/network/access/qhttpnetworkconnection_p.h b/src/network/access/qhttpnetworkconnection_p.h
index 42114ae9d6..e34c15d729 100644
--- a/src/network/access/qhttpnetworkconnection_p.h
+++ b/src/network/access/qhttpnetworkconnection_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,7 +65,9 @@
 #ifndef QT_NO_HTTP
 
 #ifndef QT_NO_SSL
-#    include <private/qsslcontext_p.h>
+#ifndef QT_NO_OPENSSL
+#    include <private/qsslcontext_openssl_p.h>
+#endif
 #    include <private/qsslsocket_p.h>
 #    include <QtNetwork/qsslsocket.h>
 #    include <QtNetwork/qsslerror.h>
diff --git a/src/network/access/qhttpnetworkconnectionchannel.cpp b/src/network/access/qhttpnetworkconnectionchannel.cpp
index 169124e9f4..49aaafe5e1 100644
--- a/src/network/access/qhttpnetworkconnectionchannel.cpp
+++ b/src/network/access/qhttpnetworkconnectionchannel.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkconnectionchannel_p.h b/src/network/access/qhttpnetworkconnectionchannel_p.h
index 450b6fc419..692c0e6a94 100644
--- a/src/network/access/qhttpnetworkconnectionchannel_p.h
+++ b/src/network/access/qhttpnetworkconnectionchannel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkheader.cpp b/src/network/access/qhttpnetworkheader.cpp
index 4f5085794f..f4250edb26 100644
--- a/src/network/access/qhttpnetworkheader.cpp
+++ b/src/network/access/qhttpnetworkheader.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkheader_p.h b/src/network/access/qhttpnetworkheader_p.h
index f550a522f2..9080946e39 100644
--- a/src/network/access/qhttpnetworkheader_p.h
+++ b/src/network/access/qhttpnetworkheader_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkreply.cpp b/src/network/access/qhttpnetworkreply.cpp
index b057fee144..55863a3c88 100644
--- a/src/network/access/qhttpnetworkreply.cpp
+++ b/src/network/access/qhttpnetworkreply.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkreply_p.h b/src/network/access/qhttpnetworkreply_p.h
index e15ace0072..6163f6c789 100644
--- a/src/network/access/qhttpnetworkreply_p.h
+++ b/src/network/access/qhttpnetworkreply_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkrequest.cpp b/src/network/access/qhttpnetworkrequest.cpp
index 8ad04c9885..f50a79b061 100644
--- a/src/network/access/qhttpnetworkrequest.cpp
+++ b/src/network/access/qhttpnetworkrequest.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpnetworkrequest_p.h b/src/network/access/qhttpnetworkrequest_p.h
index 09847d715c..d6683afa20 100644
--- a/src/network/access/qhttpnetworkrequest_p.h
+++ b/src/network/access/qhttpnetworkrequest_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpprotocolhandler.cpp b/src/network/access/qhttpprotocolhandler.cpp
index 15cba48285..28e10f751e 100644
--- a/src/network/access/qhttpprotocolhandler.cpp
+++ b/src/network/access/qhttpprotocolhandler.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpprotocolhandler_p.h b/src/network/access/qhttpprotocolhandler_p.h
index 2bbc044b6c..deb87738f0 100644
--- a/src/network/access/qhttpprotocolhandler_p.h
+++ b/src/network/access/qhttpprotocolhandler_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qhttpthreaddelegate.cpp b/src/network/access/qhttpthreaddelegate.cpp
index 76107d3110..524042add6 100644
--- a/src/network/access/qhttpthreaddelegate.cpp
+++ b/src/network/access/qhttpthreaddelegate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -188,7 +180,7 @@ public:
                                        QHttpNetworkConnection::ConnectionType connectionType,
                                        QSharedPointer<QNetworkSession> networkSession)
         : QHttpNetworkConnection(hostName, port, encrypt, connectionType, /*parent=*/0,
-                                 networkSession)
+                                 qMove(networkSession))
 #endif
     {
         setExpires(true);
diff --git a/src/network/access/qhttpthreaddelegate_p.h b/src/network/access/qhttpthreaddelegate_p.h
index 6e6d3b5797..16610828cb 100644
--- a/src/network/access/qhttpthreaddelegate_p.h
+++ b/src/network/access/qhttpthreaddelegate_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessauthenticationmanager.cpp b/src/network/access/qnetworkaccessauthenticationmanager.cpp
index b92f9c1b9b..c8ba8ae978 100644
--- a/src/network/access/qnetworkaccessauthenticationmanager.cpp
+++ b/src/network/access/qnetworkaccessauthenticationmanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessauthenticationmanager_p.h b/src/network/access/qnetworkaccessauthenticationmanager_p.h
index d87c0334c4..7c853d2476 100644
--- a/src/network/access/qnetworkaccessauthenticationmanager_p.h
+++ b/src/network/access/qnetworkaccessauthenticationmanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessbackend.cpp b/src/network/access/qnetworkaccessbackend.cpp
index b4aaca0851..a4067daf49 100644
--- a/src/network/access/qnetworkaccessbackend.cpp
+++ b/src/network/access/qnetworkaccessbackend.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -130,9 +122,9 @@ QStringList QNetworkAccessManagerPrivate::backendSupportedSchemes() const
 QNonContiguousByteDevice* QNetworkAccessBackend::createUploadByteDevice()
 {
     if (reply->outgoingDataBuffer)
-        uploadByteDevice = QSharedPointer<QNonContiguousByteDevice>(QNonContiguousByteDeviceFactory::create(reply->outgoingDataBuffer));
+        uploadByteDevice = QNonContiguousByteDeviceFactory::createShared(reply->outgoingDataBuffer);
     else if (reply->outgoingData) {
-        uploadByteDevice = QSharedPointer<QNonContiguousByteDevice>(QNonContiguousByteDeviceFactory::create(reply->outgoingData));
+        uploadByteDevice = QNonContiguousByteDeviceFactory::createShared(reply->outgoingData);
     } else {
         return 0;
     }
diff --git a/src/network/access/qnetworkaccessbackend_p.h b/src/network/access/qnetworkaccessbackend_p.h
index dd033e805b..e38a61be7d 100644
--- a/src/network/access/qnetworkaccessbackend_p.h
+++ b/src/network/access/qnetworkaccessbackend_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccesscache.cpp b/src/network/access/qnetworkaccesscache.cpp
index 8ee2c3ef27..25c5b8b7b1 100644
--- a/src/network/access/qnetworkaccesscache.cpp
+++ b/src/network/access/qnetworkaccesscache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccesscache_p.h b/src/network/access/qnetworkaccesscache_p.h
index 49ad4c6fae..171c2cda86 100644
--- a/src/network/access/qnetworkaccesscache_p.h
+++ b/src/network/access/qnetworkaccesscache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccesscachebackend.cpp b/src/network/access/qnetworkaccesscachebackend.cpp
index ea3d6b0cce..0a9702d32b 100644
--- a/src/network/access/qnetworkaccesscachebackend.cpp
+++ b/src/network/access/qnetworkaccesscachebackend.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccesscachebackend_p.h b/src/network/access/qnetworkaccesscachebackend_p.h
index 58f5aac83f..f298b84471 100644
--- a/src/network/access/qnetworkaccesscachebackend_p.h
+++ b/src/network/access/qnetworkaccesscachebackend_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessdebugpipebackend.cpp b/src/network/access/qnetworkaccessdebugpipebackend.cpp
index a91751523a..1932bbf391 100644
--- a/src/network/access/qnetworkaccessdebugpipebackend.cpp
+++ b/src/network/access/qnetworkaccessdebugpipebackend.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessdebugpipebackend_p.h b/src/network/access/qnetworkaccessdebugpipebackend_p.h
index 7593dfa9b7..da8cc9a8d2 100644
--- a/src/network/access/qnetworkaccessdebugpipebackend_p.h
+++ b/src/network/access/qnetworkaccessdebugpipebackend_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessfilebackend.cpp b/src/network/access/qnetworkaccessfilebackend.cpp
index 13e7394003..205fd7006c 100644
--- a/src/network/access/qnetworkaccessfilebackend.cpp
+++ b/src/network/access/qnetworkaccessfilebackend.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessfilebackend_p.h b/src/network/access/qnetworkaccessfilebackend_p.h
index 157461fee7..e0fe148aa0 100644
--- a/src/network/access/qnetworkaccessfilebackend_p.h
+++ b/src/network/access/qnetworkaccessfilebackend_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessftpbackend.cpp b/src/network/access/qnetworkaccessftpbackend.cpp
index e8695f9b56..317d9f90d5 100644
--- a/src/network/access/qnetworkaccessftpbackend.cpp
+++ b/src/network/access/qnetworkaccessftpbackend.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessftpbackend_p.h b/src/network/access/qnetworkaccessftpbackend_p.h
index 534efad676..0371c456f3 100644
--- a/src/network/access/qnetworkaccessftpbackend_p.h
+++ b/src/network/access/qnetworkaccessftpbackend_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessmanager.cpp b/src/network/access/qnetworkaccessmanager.cpp
index cc61f27cfb..f00b58a8ce 100644
--- a/src/network/access/qnetworkaccessmanager.cpp
+++ b/src/network/access/qnetworkaccessmanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -205,7 +197,7 @@ static void ensureInitialized()
     can be:
     \snippet code/src_network_access_qnetworkaccessmanager.cpp 1
 
-    \section1 Network and Roaming support
+    \section1 Network and Roaming Support
 
     With the addition of the \l {Bearer Management} API to Qt 4.7
     QNetworkAccessManager gained the ability to manage network connections.
diff --git a/src/network/access/qnetworkaccessmanager.h b/src/network/access/qnetworkaccessmanager.h
index 67b9bbcb07..9241ff36fb 100644
--- a/src/network/access/qnetworkaccessmanager.h
+++ b/src/network/access/qnetworkaccessmanager.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkaccessmanager_p.h b/src/network/access/qnetworkaccessmanager_p.h
index 9528330aae..f75884da38 100644
--- a/src/network/access/qnetworkaccessmanager_p.h
+++ b/src/network/access/qnetworkaccessmanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -92,7 +84,7 @@ public:
           initializeSession(true),
 #endif
           cookieJarCreated(false),
-          authenticationManager(new QNetworkAccessAuthenticationManager)
+          authenticationManager(QSharedPointer<QNetworkAccessAuthenticationManager>::create())
     { }
     ~QNetworkAccessManagerPrivate();
 
diff --git a/src/network/access/qnetworkcookie.cpp b/src/network/access/qnetworkcookie.cpp
index 664bc8282c..43d527e18d 100644
--- a/src/network/access/qnetworkcookie.cpp
+++ b/src/network/access/qnetworkcookie.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkcookie.h b/src/network/access/qnetworkcookie.h
index 2a4e686b2c..ad977d2598 100644
--- a/src/network/access/qnetworkcookie.h
+++ b/src/network/access/qnetworkcookie.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkcookie_p.h b/src/network/access/qnetworkcookie_p.h
index 6bf8a059a4..5bbaf6bb24 100644
--- a/src/network/access/qnetworkcookie_p.h
+++ b/src/network/access/qnetworkcookie_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkcookiejar.cpp b/src/network/access/qnetworkcookiejar.cpp
index d6a5986271..d3e6f7b1c8 100644
--- a/src/network/access/qnetworkcookiejar.cpp
+++ b/src/network/access/qnetworkcookiejar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkcookiejar.h b/src/network/access/qnetworkcookiejar.h
index 3c787c5dd8..017193fc21 100644
--- a/src/network/access/qnetworkcookiejar.h
+++ b/src/network/access/qnetworkcookiejar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkcookiejar_p.h b/src/network/access/qnetworkcookiejar_p.h
index 6c64d00b4d..64a1495e88 100644
--- a/src/network/access/qnetworkcookiejar_p.h
+++ b/src/network/access/qnetworkcookiejar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkdiskcache.cpp b/src/network/access/qnetworkdiskcache.cpp
index 86a3b20a9c..5282d725b8 100644
--- a/src/network/access/qnetworkdiskcache.cpp
+++ b/src/network/access/qnetworkdiskcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,6 +40,7 @@
 
 #include <qfile.h>
 #include <qdir.h>
+#include <qdatastream.h>
 #include <qdatetime.h>
 #include <qdiriterator.h>
 #include <qurl.h>
diff --git a/src/network/access/qnetworkdiskcache.h b/src/network/access/qnetworkdiskcache.h
index 20a412c96e..8984c640e7 100644
--- a/src/network/access/qnetworkdiskcache.h
+++ b/src/network/access/qnetworkdiskcache.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkdiskcache_p.h b/src/network/access/qnetworkdiskcache_p.h
index 64c5cb6335..2bc8387f57 100644
--- a/src/network/access/qnetworkdiskcache_p.h
+++ b/src/network/access/qnetworkdiskcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreply.cpp b/src/network/access/qnetworkreply.cpp
index 2d9a128559..39762e2324 100644
--- a/src/network/access/qnetworkreply.cpp
+++ b/src/network/access/qnetworkreply.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreply.h b/src/network/access/qnetworkreply.h
index f11a5e816a..4a32131775 100644
--- a/src/network/access/qnetworkreply.h
+++ b/src/network/access/qnetworkreply.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreply_p.h b/src/network/access/qnetworkreply_p.h
index ad11ef3964..6a68ecfea3 100644
--- a/src/network/access/qnetworkreply_p.h
+++ b/src/network/access/qnetworkreply_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,6 +57,16 @@ QT_BEGIN_NAMESPACE
 class QNetworkReplyPrivate: public QIODevicePrivate, public QNetworkHeadersPrivate
 {
 public:
+    enum State {
+        Idle,               // The reply is idle.
+        Buffering,          // The reply is buffering outgoing data.
+        Working,            // The reply is uploading/downloading data.
+        Finished,           // The reply has finished.
+        Aborted,            // The reply has been aborted.
+        WaitingForSession,  // The reply is waiting for the session to open before connecting.
+        Reconnecting        // The reply will reconnect to once roaming has completed.
+    };
+
     QNetworkReplyPrivate();
     QNetworkRequest request;
     QUrl url;
diff --git a/src/network/access/qnetworkreplydataimpl.cpp b/src/network/access/qnetworkreplydataimpl.cpp
index a9dd80f365..4548083986 100644
--- a/src/network/access/qnetworkreplydataimpl.cpp
+++ b/src/network/access/qnetworkreplydataimpl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreplydataimpl_p.h b/src/network/access/qnetworkreplydataimpl_p.h
index 4ca349db56..469203019a 100644
--- a/src/network/access/qnetworkreplydataimpl_p.h
+++ b/src/network/access/qnetworkreplydataimpl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreplyfileimpl.cpp b/src/network/access/qnetworkreplyfileimpl.cpp
index 2724a54309..d205aa3149 100644
--- a/src/network/access/qnetworkreplyfileimpl.cpp
+++ b/src/network/access/qnetworkreplyfileimpl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreplyfileimpl_p.h b/src/network/access/qnetworkreplyfileimpl_p.h
index 66e0f43af5..715a48d508 100644
--- a/src/network/access/qnetworkreplyfileimpl_p.h
+++ b/src/network/access/qnetworkreplyfileimpl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkreplyhttpimpl.cpp b/src/network/access/qnetworkreplyhttpimpl.cpp
index 511faca11d..a021d51952 100644
--- a/src/network/access/qnetworkreplyhttpimpl.cpp
+++ b/src/network/access/qnetworkreplyhttpimpl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -194,7 +186,7 @@ QNetworkReplyHttpImpl::QNetworkReplyHttpImpl(QNetworkAccessManager* const manage
         if (d->synchronous && outgoingData) {
             // The synchronous HTTP is a corner case, we will put all upload data in one big QByteArray in the outgoingDataBuffer.
             // Yes, this is not the most efficient thing to do, but on the other hand synchronous XHR needs to die anyway.
-            d->outgoingDataBuffer = QSharedPointer<QRingBuffer>(new QRingBuffer());
+            d->outgoingDataBuffer = QSharedPointer<QRingBuffer>::create();
             qint64 previousDataSize = 0;
             do {
                 previousDataSize = d->outgoingDataBuffer->size();
@@ -250,8 +242,8 @@ void QNetworkReplyHttpImpl::close()
 {
     Q_D(QNetworkReplyHttpImpl);
 
-    if (d->state == QNetworkReplyHttpImplPrivate::Aborted ||
-        d->state == QNetworkReplyHttpImplPrivate::Finished)
+    if (d->state == QNetworkReplyPrivate::Aborted ||
+        d->state == QNetworkReplyPrivate::Finished)
         return;
 
     // According to the documentation close only stops the download
@@ -268,19 +260,23 @@ void QNetworkReplyHttpImpl::abort()
 {
     Q_D(QNetworkReplyHttpImpl);
     // FIXME
-    if (d->state == QNetworkReplyHttpImplPrivate::Finished || d->state == QNetworkReplyHttpImplPrivate::Aborted)
+    if (d->state == QNetworkReplyPrivate::Finished || d->state == QNetworkReplyPrivate::Aborted)
         return;
 
     QNetworkReply::close();
 
-    if (d->state != QNetworkReplyHttpImplPrivate::Finished) {
+    if (d->state != QNetworkReplyPrivate::Finished) {
         // call finished which will emit signals
         // FIXME shouldn't this be emitted Queued?
         d->error(OperationCanceledError, tr("Operation canceled"));
+
+        // If state is WaitingForSession, calling finished has no effect
+        if (d->state == QNetworkReplyPrivate::WaitingForSession)
+            d->state = QNetworkReplyPrivate::Working;
         d->finished();
     }
 
-    d->state = QNetworkReplyHttpImplPrivate::Aborted;
+    d->state = QNetworkReplyPrivate::Aborted;
 
     emit abortHttpRequest();
 }
@@ -441,8 +437,8 @@ QNetworkReplyHttpImplPrivate::QNetworkReplyHttpImplPrivate()
     , downloadBufferReadPosition(0)
     , downloadBufferCurrentSize(0)
     , downloadZerocopyBuffer(0)
-    , pendingDownloadDataEmissions(new QAtomicInt())
-    , pendingDownloadProgressEmissions(new QAtomicInt())
+    , pendingDownloadDataEmissions(QSharedPointer<QAtomicInt>::create())
+    , pendingDownloadProgressEmissions(QSharedPointer<QAtomicInt>::create())
     #ifndef QT_NO_SSL
     , pendingIgnoreAllSslErrors(false)
     #endif
@@ -557,23 +553,21 @@ bool QNetworkReplyHttpImplPrivate::loadFromCacheIfAllowed(QHttpNetworkRequest &h
         int resident_time = now - response_time;
         int current_age   = corrected_initial_age + resident_time;
 
+        int freshness_lifetime = 0;
+
         // RFC 2616 13.2.4 Expiration Calculations
-        if (!expirationDate.isValid()) {
-            if (lastModified.isValid()) {
-                int diff = currentDateTime.secsTo(lastModified);
-                expirationDate = lastModified.addSecs(diff / 10);
-                if (httpRequest.headerField("Warning").isEmpty()) {
-                    QDateTime dt;
-                    dt.setTime_t(current_age);
-                    if (dt.daysTo(currentDateTime) > 1)
-                        httpRequest.setHeaderField("Warning", "113");
-                }
+        if (lastModified.isValid() && dateHeader.isValid()) {
+            int diff = lastModified.secsTo(dateHeader);
+            freshness_lifetime = diff / 10;
+            if (httpRequest.headerField("Warning").isEmpty()) {
+                QDateTime dt = currentDateTime.addSecs(current_age);
+                if (currentDateTime.daysTo(dt) > 1)
+                    httpRequest.setHeaderField("Warning", "113");
             }
         }
 
-        // the cache-saving code below sets the expirationDate with date+max_age
-        // if "max-age" is present, or to Expires otherwise
-        int freshness_lifetime = dateHeader.secsTo(expirationDate);
+        // the cache-saving code below sets the freshness_lifetime with (dateHeader - last_modified) / 10
+        // if "last-modified" is present, or to Expires otherwise
         response_is_fresh = (freshness_lifetime > current_age);
     } else {
         // expiration date was calculated earlier (e.g. when storing object to the cache)
@@ -1592,8 +1586,14 @@ bool QNetworkReplyHttpImplPrivate::start()
                             q, SLOT(_q_networkSessionUsagePoliciesChanged(QNetworkSession::UsagePolicies)));
         postRequest();
         return true;
+    } else if (synchronous) {
+        // Command line applications using the synchronous path such as xmlpatterns may need an extra push.
+        networkSession->open();
+        if (networkSession->waitForOpened()) {
+            postRequest();
+            return true;
+        }
     }
-
     return false;
 #endif
 }
@@ -1752,7 +1752,7 @@ void QNetworkReplyHttpImplPrivate::_q_bufferOutgoingData()
 
     if (!outgoingDataBuffer) {
         // first call, create our buffer
-        outgoingDataBuffer = QSharedPointer<QRingBuffer>(new QRingBuffer());
+        outgoingDataBuffer = QSharedPointer<QRingBuffer>::create();
 
         QObject::connect(outgoingData, SIGNAL(readyRead()), q, SLOT(_q_bufferOutgoingData()));
         QObject::connect(outgoingData, SIGNAL(readChannelFinished()), q, SLOT(_q_bufferOutgoingDataFinished()));
@@ -1805,13 +1805,13 @@ void QNetworkReplyHttpImplPrivate::_q_networkSessionConnected()
         return;
 
     switch (state) {
-    case QNetworkReplyImplPrivate::Buffering:
-    case QNetworkReplyImplPrivate::Working:
-    case QNetworkReplyImplPrivate::Reconnecting:
+    case QNetworkReplyPrivate::Buffering:
+    case QNetworkReplyPrivate::Working:
+    case QNetworkReplyPrivate::Reconnecting:
         // Migrate existing downloads to new network connection.
         migrateBackend();
         break;
-    case QNetworkReplyImplPrivate::WaitingForSession:
+    case QNetworkReplyPrivate::WaitingForSession:
         // Start waiting requests.
         QMetaObject::invokeMethod(q, "_q_startOperation", Qt::QueuedConnection);
         break;
@@ -1881,9 +1881,9 @@ QNonContiguousByteDevice* QNetworkReplyHttpImplPrivate::createUploadByteDevice()
     Q_Q(QNetworkReplyHttpImpl);
 
     if (outgoingDataBuffer)
-        uploadByteDevice = QSharedPointer<QNonContiguousByteDevice>(QNonContiguousByteDeviceFactory::create(outgoingDataBuffer));
+        uploadByteDevice = QNonContiguousByteDeviceFactory::createShared(outgoingDataBuffer);
     else if (outgoingData) {
-        uploadByteDevice = QSharedPointer<QNonContiguousByteDevice>(QNonContiguousByteDeviceFactory::create(outgoingData));
+        uploadByteDevice = QNonContiguousByteDeviceFactory::createShared(outgoingData);
     } else {
         return 0;
     }
diff --git a/src/network/access/qnetworkreplyhttpimpl_p.h b/src/network/access/qnetworkreplyhttpimpl_p.h
index 4a5b61a227..baff7a943c 100644
--- a/src/network/access/qnetworkreplyhttpimpl_p.h
+++ b/src/network/access/qnetworkreplyhttpimpl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -160,16 +152,6 @@ public:
 
     static QHttpNetworkRequest::Priority convert(const QNetworkRequest::Priority& prio);
 
-    enum State {
-        Idle,               // The reply is idle.
-        Buffering,          // The reply is buffering outgoing data.
-        Working,            // The reply is uploading/downloading data.
-        Finished,           // The reply has finished.
-        Aborted,            // The reply has been aborted.
-        WaitingForSession,  // The reply is waiting for the session to open before connecting.
-        Reconnecting        // The reply will reconnect to once roaming has completed.
-    };
-
     QNetworkReplyHttpImplPrivate();
     ~QNetworkReplyHttpImplPrivate();
 
diff --git a/src/network/access/qnetworkreplyimpl.cpp b/src/network/access/qnetworkreplyimpl.cpp
index f51b85cba0..5af3bb37be 100644
--- a/src/network/access/qnetworkreplyimpl.cpp
+++ b/src/network/access/qnetworkreplyimpl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -248,7 +240,7 @@ void QNetworkReplyImplPrivate::_q_bufferOutgoingData()
 
     if (!outgoingDataBuffer) {
         // first call, create our buffer
-        outgoingDataBuffer = QSharedPointer<QRingBuffer>(new QRingBuffer());
+        outgoingDataBuffer = QSharedPointer<QRingBuffer>::create();
 
         QObject::connect(outgoingData, SIGNAL(readyRead()), q, SLOT(_q_bufferOutgoingData()));
         QObject::connect(outgoingData, SIGNAL(readChannelFinished()), q, SLOT(_q_bufferOutgoingDataFinished()));
@@ -301,13 +293,13 @@ void QNetworkReplyImplPrivate::_q_networkSessionConnected()
         return;
 
     switch (state) {
-    case QNetworkReplyImplPrivate::Buffering:
-    case QNetworkReplyImplPrivate::Working:
-    case QNetworkReplyImplPrivate::Reconnecting:
+    case QNetworkReplyPrivate::Buffering:
+    case QNetworkReplyPrivate::Working:
+    case QNetworkReplyPrivate::Reconnecting:
         // Migrate existing downloads to new network connection.
         migrateBackend();
         break;
-    case QNetworkReplyImplPrivate::WaitingForSession:
+    case QNetworkReplyPrivate::WaitingForSession:
         // Start waiting requests.
         QMetaObject::invokeMethod(q, "_q_startOperation", Qt::QueuedConnection);
         break;
@@ -367,7 +359,7 @@ void QNetworkReplyImplPrivate::setup(QNetworkAccessManager::Operation op, const
     // The synchronous HTTP is a corner case, we will put all upload data in one big QByteArray in the outgoingDataBuffer.
     // Yes, this is not the most efficient thing to do, but on the other hand synchronous XHR needs to die anyway.
     if (synchronousHttpAttribute.toBool() && outgoingData) {
-        outgoingDataBuffer = QSharedPointer<QRingBuffer>(new QRingBuffer());
+        outgoingDataBuffer = QSharedPointer<QRingBuffer>::create();
         qint64 previousDataSize = 0;
         do {
             previousDataSize = outgoingDataBuffer->size();
@@ -916,7 +908,7 @@ QNetworkReplyImpl::~QNetworkReplyImpl()
 void QNetworkReplyImpl::abort()
 {
     Q_D(QNetworkReplyImpl);
-    if (d->state == QNetworkReplyImplPrivate::Finished || d->state == QNetworkReplyImplPrivate::Aborted)
+    if (d->state == QNetworkReplyPrivate::Finished || d->state == QNetworkReplyPrivate::Aborted)
         return;
 
     // stop both upload and download
@@ -927,14 +919,14 @@ void QNetworkReplyImpl::abort()
 
     QNetworkReply::close();
 
-    if (d->state != QNetworkReplyImplPrivate::Finished) {
+    if (d->state != QNetworkReplyPrivate::Finished) {
         // call finished which will emit signals
         d->error(OperationCanceledError, tr("Operation canceled"));
-        if (d->state == QNetworkReplyImplPrivate::WaitingForSession)
-            d->state = QNetworkReplyImplPrivate::Working;
+        if (d->state == QNetworkReplyPrivate::WaitingForSession)
+            d->state = QNetworkReplyPrivate::Working;
         d->finished();
     }
-    d->state = QNetworkReplyImplPrivate::Aborted;
+    d->state = QNetworkReplyPrivate::Aborted;
 
     // finished may access the backend
     if (d->backend) {
@@ -946,8 +938,8 @@ void QNetworkReplyImpl::abort()
 void QNetworkReplyImpl::close()
 {
     Q_D(QNetworkReplyImpl);
-    if (d->state == QNetworkReplyImplPrivate::Aborted ||
-        d->state == QNetworkReplyImplPrivate::Finished)
+    if (d->state == QNetworkReplyPrivate::Aborted ||
+        d->state == QNetworkReplyPrivate::Finished)
         return;
 
     // stop the download
@@ -1041,7 +1033,7 @@ qint64 QNetworkReplyImpl::readData(char *data, qint64 maxlen)
     if (d->downloadBuffer) {
         qint64 maxAvail = qMin<qint64>(d->downloadBufferCurrentSize - d->downloadBufferReadPosition, maxlen);
         if (maxAvail == 0)
-            return d->state == QNetworkReplyImplPrivate::Finished ? -1 : 0;
+            return d->state == QNetworkReplyPrivate::Finished ? -1 : 0;
         // FIXME what about "Aborted" state?
         memcpy(data, d->downloadBuffer + d->downloadBufferReadPosition, maxAvail);
         d->downloadBufferReadPosition += maxAvail;
@@ -1050,7 +1042,7 @@ qint64 QNetworkReplyImpl::readData(char *data, qint64 maxlen)
 
 
     if (d->readBuffer.isEmpty())
-        return d->state == QNetworkReplyImplPrivate::Finished ? -1 : 0;
+        return d->state == QNetworkReplyPrivate::Finished ? -1 : 0;
     // FIXME what about "Aborted" state?
 
     d->backendNotify(QNetworkReplyImplPrivate::NotifyDownstreamReadyWrite);
@@ -1101,7 +1093,7 @@ bool QNetworkReplyImplPrivate::migrateBackend()
     if (!backend->canResume())
         return false;
 
-    state = QNetworkReplyImplPrivate::Reconnecting;
+    state = QNetworkReplyPrivate::Reconnecting;
 
     if (backend) {
         delete backend;
diff --git a/src/network/access/qnetworkreplyimpl_p.h b/src/network/access/qnetworkreplyimpl_p.h
index 9edc0f6b59..9bd7c88c84 100644
--- a/src/network/access/qnetworkreplyimpl_p.h
+++ b/src/network/access/qnetworkreplyimpl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -118,16 +110,6 @@ public:
         NotifyCopyFinished
     };
 
-    enum State {
-        Idle,               // The reply is idle.
-        Buffering,          // The reply is buffering outgoing data.
-        Working,            // The reply is uploading/downloading data.
-        Finished,           // The reply has finished.
-        Aborted,            // The reply has been aborted.
-        WaitingForSession,  // The reply is waiting for the session to open before connecting.
-        Reconnecting        // The reply will reconnect to once roaming has completed.
-    };
-
     typedef QQueue<InternalNotifications> NotificationQueue;
 
     QNetworkReplyImplPrivate();
diff --git a/src/network/access/qnetworkreplynsurlconnectionimpl_p.h b/src/network/access/qnetworkreplynsurlconnectionimpl_p.h
index 967eb13246..05184352f7 100644
--- a/src/network/access/qnetworkreplynsurlconnectionimpl_p.h
+++ b/src/network/access/qnetworkreplynsurlconnectionimpl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkrequest.cpp b/src/network/access/qnetworkrequest.cpp
index 850f5bc7e7..c51470e25a 100644
--- a/src/network/access/qnetworkrequest.cpp
+++ b/src/network/access/qnetworkrequest.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkrequest.h b/src/network/access/qnetworkrequest.h
index 27b02a89ef..0239ae7f4b 100644
--- a/src/network/access/qnetworkrequest.h
+++ b/src/network/access/qnetworkrequest.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qnetworkrequest_p.h b/src/network/access/qnetworkrequest_p.h
index a855096cf7..e53611d9d1 100644
--- a/src/network/access/qnetworkrequest_p.h
+++ b/src/network/access/qnetworkrequest_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/access/qspdyprotocolhandler.cpp b/src/network/access/qspdyprotocolhandler.cpp
index 32a804e9f4..3b9dfe27c7 100644
--- a/src/network/access/qspdyprotocolhandler.cpp
+++ b/src/network/access/qspdyprotocolhandler.cpp
@@ -6,36 +6,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -506,25 +498,7 @@ QByteArray QSpdyProtocolHandler::composeHeader(const QHttpNetworkRequest &reques
 #endif
     uncompressedHeader.append(headerField(":version", "HTTP/1.1"));
 
-    QHostAddress add; // ### unify with the host parsing from QHttpNetworkConnection
-    QByteArray host;
-    QString hostName = m_connection->hostName();
-    if (add.setAddress(hostName)) {
-        if (add.protocol() == QAbstractSocket::IPv6Protocol)
-            host = "[" + hostName.toLatin1() + "]"; //format the ipv6 in the standard way
-        else
-            host = hostName.toLatin1();
-
-    } else {
-        host = QUrl::toAce(hostName);
-    }
-
-    int port = request.url().port();
-    if (port != -1) {
-        host += ':';
-        host += QByteArray::number(port);
-    }
-    uncompressedHeader.append(headerField(":host", host));
+    uncompressedHeader.append(headerField(":host", request.url().authority(QUrl::FullyEncoded | QUrl::RemoveUserInfo).toLatin1()));
 
     uncompressedHeader.append(headerField(":scheme", request.url().scheme().toLatin1()));
 
diff --git a/src/network/access/qspdyprotocolhandler_p.h b/src/network/access/qspdyprotocolhandler_p.h
index 50c5ed52a1..9823111d07 100644
--- a/src/network/access/qspdyprotocolhandler_p.h
+++ b/src/network/access/qspdyprotocolhandler_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qbearerengine.cpp b/src/network/bearer/qbearerengine.cpp
index 520323471a..3c3f468b1b 100644
--- a/src/network/bearer/qbearerengine.cpp
+++ b/src/network/bearer/qbearerengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qbearerengine_p.h b/src/network/bearer/qbearerengine_p.h
index 66863c8438..614dc0a8ab 100644
--- a/src/network/bearer/qbearerengine_p.h
+++ b/src/network/bearer/qbearerengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qbearerplugin.cpp b/src/network/bearer/qbearerplugin.cpp
index 794201329b..f4f69b9c06 100644
--- a/src/network/bearer/qbearerplugin.cpp
+++ b/src/network/bearer/qbearerplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qbearerplugin_p.h b/src/network/bearer/qbearerplugin_p.h
index 7b4611074b..d47e67b14d 100644
--- a/src/network/bearer/qbearerplugin_p.h
+++ b/src/network/bearer/qbearerplugin_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworkconfigmanager.cpp b/src/network/bearer/qnetworkconfigmanager.cpp
index db1325d85b..fd52f725d0 100644
--- a/src/network/bearer/qnetworkconfigmanager.cpp
+++ b/src/network/bearer/qnetworkconfigmanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworkconfigmanager.h b/src/network/bearer/qnetworkconfigmanager.h
index 62b93b19c1..1ff233c085 100644
--- a/src/network/bearer/qnetworkconfigmanager.h
+++ b/src/network/bearer/qnetworkconfigmanager.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworkconfigmanager_p.cpp b/src/network/bearer/qnetworkconfigmanager_p.cpp
index 192bf15b50..ef7ab51462 100644
--- a/src/network/bearer/qnetworkconfigmanager_p.cpp
+++ b/src/network/bearer/qnetworkconfigmanager_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworkconfigmanager_p.h b/src/network/bearer/qnetworkconfigmanager_p.h
index 78b90b60a8..0e209f505f 100644
--- a/src/network/bearer/qnetworkconfigmanager_p.h
+++ b/src/network/bearer/qnetworkconfigmanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworkconfiguration.cpp b/src/network/bearer/qnetworkconfiguration.cpp
index a66b39f733..dd1f92e59d 100644
--- a/src/network/bearer/qnetworkconfiguration.cpp
+++ b/src/network/bearer/qnetworkconfiguration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -91,7 +83,7 @@ QT_BEGIN_NAMESPACE
     \l {QNetworkSession}{session} is \l {QNetworkSession::open()}{opened}. Not all platforms
     support the concept of a user choice configuration.
 
-    \section1 Configuration states
+    \section1 Configuration States
 
     The list of available configurations can be obtained via
     QNetworkConfigurationManager::allConfigurations(). A configuration can have
diff --git a/src/network/bearer/qnetworkconfiguration.h b/src/network/bearer/qnetworkconfiguration.h
index 8887525a2f..27c236199d 100644
--- a/src/network/bearer/qnetworkconfiguration.h
+++ b/src/network/bearer/qnetworkconfiguration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworkconfiguration_p.h b/src/network/bearer/qnetworkconfiguration_p.h
index 20353726ac..2227871cae 100644
--- a/src/network/bearer/qnetworkconfiguration_p.h
+++ b/src/network/bearer/qnetworkconfiguration_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworksession.cpp b/src/network/bearer/qnetworksession.cpp
index 98a8f27a6e..4ee166aa3d 100644
--- a/src/network/bearer/qnetworksession.cpp
+++ b/src/network/bearer/qnetworksession.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworksession.h b/src/network/bearer/qnetworksession.h
index 1a76b232e7..281e868145 100644
--- a/src/network/bearer/qnetworksession.h
+++ b/src/network/bearer/qnetworksession.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qnetworksession_p.h b/src/network/bearer/qnetworksession_p.h
index 909cce5e4b..2ff458a00e 100644
--- a/src/network/bearer/qnetworksession_p.h
+++ b/src/network/bearer/qnetworksession_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qsharednetworksession.cpp b/src/network/bearer/qsharednetworksession.cpp
index 00a10a5c1b..04e28b4ef5 100644
--- a/src/network/bearer/qsharednetworksession.cpp
+++ b/src/network/bearer/qsharednetworksession.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/bearer/qsharednetworksession_p.h b/src/network/bearer/qsharednetworksession_p.h
index c0f2acd334..5e0a78c350 100644
--- a/src/network/bearer/qsharednetworksession_p.h
+++ b/src/network/bearer/qsharednetworksession_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/doc/qtnetwork.qdocconf b/src/network/doc/qtnetwork.qdocconf
index 33d6c24461..522d71fd27 100644
--- a/src/network/doc/qtnetwork.qdocconf
+++ b/src/network/doc/qtnetwork.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtNetwork
 description             = Qt Network Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = network
diff --git a/src/network/doc/snippets/code/src_network_access_qhttpmultipart.cpp b/src/network/doc/snippets/code/src_network_access_qhttpmultipart.cpp
index fd1efd8d2c..00f9626e36 100644
--- a/src/network/doc/snippets/code/src_network_access_qhttpmultipart.cpp
+++ b/src/network/doc/snippets/code/src_network_access_qhttpmultipart.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/doc/snippets/code/src_network_access_qhttppart.cpp b/src/network/doc/snippets/code/src_network_access_qhttppart.cpp
index f4d86f876d..11c94e900a 100644
--- a/src/network/doc/snippets/code/src_network_access_qhttppart.cpp
+++ b/src/network/doc/snippets/code/src_network_access_qhttppart.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/doc/src/network-programming.qdoc b/src/network/doc/src/network-programming.qdoc
index 821b0ada15..f216a11d51 100644
--- a/src/network/doc/src/network-programming.qdoc
+++ b/src/network/doc/src/network-programming.qdoc
@@ -204,7 +204,7 @@
     \l{multicastreceiver}{Multicast Receiver} examples show how to use
     write UDP multicast clients.
 
-    \section1 Resolving Host Names using QHostInfo
+    \section1 Resolving Host Names Using QHostInfo
 
     Before establishing a network connection, QTcpSocket and
     QUdpSocket perform a name lookup, translating the host name
diff --git a/src/network/kernel/qauthenticator.cpp b/src/network/kernel/qauthenticator.cpp
index c582e95b1c..ecfdecc020 100644
--- a/src/network/kernel/qauthenticator.cpp
+++ b/src/network/kernel/qauthenticator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -282,6 +274,15 @@ QString QAuthenticator::realm() const
 }
 
 /*!
+  \internal
+*/
+void QAuthenticator::setRealm(const QString &realm)
+{
+    detach();
+    d->realm = realm;
+}
+
+/*!
     \since 4.7
     Returns the value related to option \a opt if it was set by the server.
     See \l{QAuthenticator#Options} for more information on incoming options.
diff --git a/src/network/kernel/qauthenticator.h b/src/network/kernel/qauthenticator.h
index 4d96104bc0..436e55336f 100644
--- a/src/network/kernel/qauthenticator.h
+++ b/src/network/kernel/qauthenticator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,7 @@ public:
     void setPassword(const QString &password);
 
     QString realm() const;
+    void setRealm(const QString &realm);
 
     QVariant option(const QString &opt) const;
     QVariantHash options() const;
diff --git a/src/network/kernel/qauthenticator_p.h b/src/network/kernel/qauthenticator_p.h
index 71cd6a5531..2afe9a00a9 100644
--- a/src/network/kernel/qauthenticator_p.h
+++ b/src/network/kernel/qauthenticator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qdnslookup.cpp b/src/network/kernel/qdnslookup.cpp
index e111a190cb..2a08aaa44b 100644
--- a/src/network/kernel/qdnslookup.cpp
+++ b/src/network/kernel/qdnslookup.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -283,9 +275,21 @@ QDnsLookup::QDnsLookup(Type type, const QString &name, QObject *parent)
 
 /*!
     \fn QDnsLookup::QDnsLookup(Type type, const QString &name, const QHostAddress &nameserver, QObject *parent)
-    \internal
+    \since 5.4
+    Constructs a QDnsLookup object for the given \a type, \a name and
+    \a nameserver and sets \a parent as the parent object.
 */
 
+QDnsLookup::QDnsLookup(Type type, const QString &name, const QHostAddress &nameserver, QObject *parent)
+    : QObject(*new QDnsLookupPrivate, parent)
+{
+    Q_D(QDnsLookup);
+    qRegisterMetaType<QDnsLookupReply>();
+    d->name = name;
+    d->type = type;
+    d->nameserver = nameserver;
+}
+
 /*!
     Destroys the QDnsLookup object.
 
diff --git a/src/network/kernel/qdnslookup.h b/src/network/kernel/qdnslookup.h
index ffbef61f92..06f489f218 100644
--- a/src/network/kernel/qdnslookup.h
+++ b/src/network/kernel/qdnslookup.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qdnslookup_android.cpp b/src/network/kernel/qdnslookup_android.cpp
index 1ace5727c2..afcc37cc7f 100644
--- a/src/network/kernel/qdnslookup_android.cpp
+++ b/src/network/kernel/qdnslookup_android.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qdnslookup_p.h b/src/network/kernel/qdnslookup_p.h
index 7c0b0e862a..ded1e51313 100644
--- a/src/network/kernel/qdnslookup_p.h
+++ b/src/network/kernel/qdnslookup_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qdnslookup_unix.cpp b/src/network/kernel/qdnslookup_unix.cpp
index 8c5a0ebdba..3cbb8c9142 100644
--- a/src/network/kernel/qdnslookup_unix.cpp
+++ b/src/network/kernel/qdnslookup_unix.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qdnslookup_win.cpp b/src/network/kernel/qdnslookup_win.cpp
index 6f58e64440..2573db3cad 100644
--- a/src/network/kernel/qdnslookup_win.cpp
+++ b/src/network/kernel/qdnslookup_win.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qdnslookup_winrt.cpp b/src/network/kernel/qdnslookup_winrt.cpp
index e2a5ba2f37..980d0bf1c6 100644
--- a/src/network/kernel/qdnslookup_winrt.cpp
+++ b/src/network/kernel/qdnslookup_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,31 +73,28 @@ void QDnsLookupRunnable::query(const int requestType, const QByteArray &requestN
         return;
     }
 
-    IHostNameFactory *hostnameFactory;
-
-    HStringReference classId(RuntimeClass_Windows_Networking_HostName);
-    if (FAILED(GetActivationFactory(classId.Get(), &hostnameFactory))) {
+    ComPtr<IHostNameFactory> hostnameFactory;
+    HRESULT hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_HostName).Get(),
+                                        IID_PPV_ARGS(&hostnameFactory));
+    if (FAILED(hr)) {
         reply->error = QDnsLookup::ResolverError;
         reply->errorString = QLatin1String("Could not obtain hostname factory");
         return;
     }
-    IHostName *host;
+    ComPtr<IHostName> host;
     HStringReference hostNameRef((const wchar_t*)aceHostname.utf16());
     hostnameFactory->CreateHostName(hostNameRef.Get(), &host);
-    hostnameFactory->Release();
 
-    IDatagramSocketStatics *datagramSocketStatics;
+    ComPtr<IDatagramSocketStatics> datagramSocketStatics;
     GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_Sockets_DatagramSocket).Get(), &datagramSocketStatics);
 
-    IAsyncOperation<IVectorView<EndpointPair*> *> *op;
-    datagramSocketStatics->GetEndpointPairsAsync(host,
+    ComPtr<IAsyncOperation<IVectorView<EndpointPair *> *>> op;
+    datagramSocketStatics->GetEndpointPairsAsync(host.Get(),
                                                  HString::MakeReference(L"0").Get(),
                                                  &op);
-    datagramSocketStatics->Release();
-    host->Release();
 
-    IVectorView<EndpointPair*> *endpointPairs = 0;
-    HRESULT hr = op->GetResults(&endpointPairs);
+    ComPtr<IVectorView<EndpointPair *>> endpointPairs;
+    hr = op->GetResults(&endpointPairs);
     int waitCount = 0;
     while (hr == E_ILLEGAL_METHOD_CALL) {
         WaitForSingleObjectEx(GetCurrentThread(), 50, FALSE);
@@ -113,7 +102,6 @@ void QDnsLookupRunnable::query(const int requestType, const QByteArray &requestN
         if (++waitCount > 1200) // Wait for 1 minute max
             return;
     }
-    op->Release();
 
     if (!endpointPairs)
         return;
@@ -123,11 +111,10 @@ void QDnsLookupRunnable::query(const int requestType, const QByteArray &requestN
     // endpoint pairs might contain duplicates so we temporarily store addresses in a QSet
     QSet<QHostAddress> addresses;
     for (unsigned int i = 0; i < size; ++i) {
-        IEndpointPair *endpointpair;
+        ComPtr<IEndpointPair> endpointpair;
         endpointPairs->GetAt(i, &endpointpair);
-        IHostName *remoteHost;
+        ComPtr<IHostName> remoteHost;
         endpointpair->get_RemoteHostName(&remoteHost);
-        endpointpair->Release();
         HostNameType type;
         remoteHost->get_Type(&type);
         if (type == HostNameType_Bluetooth || type == HostNameType_DomainName
@@ -138,7 +125,6 @@ void QDnsLookupRunnable::query(const int requestType, const QByteArray &requestN
 
         HString name;
         remoteHost->get_CanonicalName(name.GetAddressOf());
-        remoteHost->Release();
         UINT32 length;
         PCWSTR rawString = name.GetRawBuffer(&length);
         addresses.insert(QHostAddress(QString::fromWCharArray(rawString, length)));
diff --git a/src/network/kernel/qhostaddress.cpp b/src/network/kernel/qhostaddress.cpp
index 1d38d06ae9..cf24438f0c 100644
--- a/src/network/kernel/qhostaddress.cpp
+++ b/src/network/kernel/qhostaddress.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostaddress.h b/src/network/kernel/qhostaddress.h
index d27a326fb9..d849048b6f 100644
--- a/src/network/kernel/qhostaddress.h
+++ b/src/network/kernel/qhostaddress.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostaddress_p.h b/src/network/kernel/qhostaddress_p.h
index 641e39765f..bf0faab2dd 100644
--- a/src/network/kernel/qhostaddress_p.h
+++ b/src/network/kernel/qhostaddress_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostinfo.cpp b/src/network/kernel/qhostinfo.cpp
index cafb09b181..a9a80054f4 100644
--- a/src/network/kernel/qhostinfo.cpp
+++ b/src/network/kernel/qhostinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostinfo.h b/src/network/kernel/qhostinfo.h
index 38d55def34..9bd1486728 100644
--- a/src/network/kernel/qhostinfo.h
+++ b/src/network/kernel/qhostinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostinfo_p.h b/src/network/kernel/qhostinfo_p.h
index 1ec90cc3e9..b51773f803 100644
--- a/src/network/kernel/qhostinfo_p.h
+++ b/src/network/kernel/qhostinfo_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostinfo_unix.cpp b/src/network/kernel/qhostinfo_unix.cpp
index df8c8b145a..e987acea2c 100644
--- a/src/network/kernel/qhostinfo_unix.cpp
+++ b/src/network/kernel/qhostinfo_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostinfo_win.cpp b/src/network/kernel/qhostinfo_win.cpp
index cbaa9bec6a..433484733e 100644
--- a/src/network/kernel/qhostinfo_win.cpp
+++ b/src/network/kernel/qhostinfo_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qhostinfo_winrt.cpp b/src/network/kernel/qhostinfo_winrt.cpp
index e02cd98e08..9b4dbd4b01 100644
--- a/src/network/kernel/qhostinfo_winrt.cpp
+++ b/src/network/kernel/qhostinfo_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -80,29 +72,25 @@ QHostInfo QHostInfoAgent::fromName(const QString &hostName)
         return results;
     }
 
-    IHostNameFactory *hostnameFactory;
-
-    HStringReference classId(RuntimeClass_Windows_Networking_HostName);
-    if (FAILED(GetActivationFactory(classId.Get(), &hostnameFactory)))
-        Q_ASSERT_X(false, "QHostInfoAgent", "Could not obtain hostname factory.");
+    ComPtr<IHostNameFactory> hostnameFactory;
+    HRESULT hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_HostName).Get(),
+                                        IID_PPV_ARGS(&hostnameFactory));
+    Q_ASSERT_X(SUCCEEDED(hr), Q_FUNC_INFO, qPrintable(qt_error_string(hr)));
 
-    IHostName *host;
+    ComPtr<IHostName> host;
     HStringReference hostNameRef((const wchar_t*)hostName.utf16());
     hostnameFactory->CreateHostName(hostNameRef.Get(), &host);
-    hostnameFactory->Release();
 
-    IDatagramSocketStatics *datagramSocketStatics;
+    ComPtr<IDatagramSocketStatics> datagramSocketStatics;
     GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_Sockets_DatagramSocket).Get(), &datagramSocketStatics);
 
-    IAsyncOperation<IVectorView<EndpointPair*> *> *op;
-    datagramSocketStatics->GetEndpointPairsAsync(host,
+    ComPtr<IAsyncOperation<IVectorView<EndpointPair *> *>> op;
+    datagramSocketStatics->GetEndpointPairsAsync(host.Get(),
                                                  HString::MakeReference(L"0").Get(),
                                                  &op);
-    datagramSocketStatics->Release();
-    host->Release();
 
-    IVectorView<EndpointPair*> *endpointPairs = 0;
-    HRESULT hr = op->GetResults(&endpointPairs);
+    ComPtr<IVectorView<EndpointPair *>> endpointPairs;
+    hr = op->GetResults(&endpointPairs);
     int waitCount = 0;
     while (hr == E_ILLEGAL_METHOD_CALL) {
         WaitForSingleObjectEx(GetCurrentThread(), 50, FALSE);
@@ -110,7 +98,6 @@ QHostInfo QHostInfoAgent::fromName(const QString &hostName)
         if (++waitCount > 1200) // Wait for 1 minute max
             return results;
     }
-    op->Release();
 
     if (!endpointPairs)
         return results;
@@ -119,11 +106,10 @@ QHostInfo QHostInfoAgent::fromName(const QString &hostName)
     endpointPairs->get_Size(&size);
     QList<QHostAddress> addresses;
     for (unsigned int i = 0; i < size; ++i) {
-        IEndpointPair *endpointpair;
+        ComPtr<IEndpointPair> endpointpair;
         endpointPairs->GetAt(i, &endpointpair);
-        IHostName *remoteHost;
+        ComPtr<IHostName> remoteHost;
         endpointpair->get_RemoteHostName(&remoteHost);
-        endpointpair->Release();
         if (!remoteHost)
             continue;
         HostNameType type;
@@ -133,7 +119,6 @@ QHostInfo QHostInfoAgent::fromName(const QString &hostName)
 
         HString name;
         remoteHost->get_CanonicalName(name.GetAddressOf());
-        remoteHost->Release();
         UINT32 length;
         PCWSTR rawString = name.GetRawBuffer(&length);
         QHostAddress addr;
@@ -148,12 +133,11 @@ QHostInfo QHostInfoAgent::fromName(const QString &hostName)
 
 QString QHostInfo::localHostName()
 {
-    INetworkInformationStatics *statics;
+    ComPtr<INetworkInformationStatics> statics;
     GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_Connectivity_NetworkInformation).Get(), &statics);
 
-    IVectorView<HostName*> *hostNames = 0;
+    ComPtr<IVectorView<HostName *>> hostNames;
     statics->GetHostNames(&hostNames);
-    statics->Release();
     if (!hostNames)
         return QString();
 
@@ -163,7 +147,7 @@ QString QHostInfo::localHostName()
         return QString();
 
     for (unsigned int i = 0; i < size; ++i) {
-        IHostName *hostName;
+        ComPtr<IHostName> hostName;
         hostNames->GetAt(i, &hostName);
         HostNameType type;
         hostName->get_Type(&type);
@@ -172,18 +156,15 @@ QString QHostInfo::localHostName()
 
         HString name;
         hostName->get_CanonicalName(name.GetAddressOf());
-        hostName->Release();
         UINT32 length;
         PCWSTR rawString = name.GetRawBuffer(&length);
         return QString::fromWCharArray(rawString, length);
     }
-    IHostName *firstHost;
+    ComPtr<IHostName> firstHost;
     hostNames->GetAt(0, &firstHost);
-    hostNames->Release();
 
     HString name;
     firstHost->get_CanonicalName(name.GetAddressOf());
-    firstHost->Release();
     UINT32 length;
     PCWSTR rawString = name.GetRawBuffer(&length);
     return QString::fromWCharArray(rawString, length);
diff --git a/src/network/kernel/qnetworkfunctions_wince.h b/src/network/kernel/qnetworkfunctions_wince.h
index ccf1ed9e38..6c39a1c606 100644
--- a/src/network/kernel/qnetworkfunctions_wince.h
+++ b/src/network/kernel/qnetworkfunctions_wince.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface.cpp b/src/network/kernel/qnetworkinterface.cpp
index 632b0cd156..b21bcee585 100644
--- a/src/network/kernel/qnetworkinterface.cpp
+++ b/src/network/kernel/qnetworkinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface.h b/src/network/kernel/qnetworkinterface.h
index 53d5d6e664..d8482a15af 100644
--- a/src/network/kernel/qnetworkinterface.h
+++ b/src/network/kernel/qnetworkinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface_p.h b/src/network/kernel/qnetworkinterface_p.h
index 2fe9829eb2..9d4c26aabf 100644
--- a/src/network/kernel/qnetworkinterface_p.h
+++ b/src/network/kernel/qnetworkinterface_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface_unix.cpp b/src/network/kernel/qnetworkinterface_unix.cpp
index d0e2eca1e0..782bb76f20 100644
--- a/src/network/kernel/qnetworkinterface_unix.cpp
+++ b/src/network/kernel/qnetworkinterface_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface_win.cpp b/src/network/kernel/qnetworkinterface_win.cpp
index 02c0801cef..4a57c2e0f0 100644
--- a/src/network/kernel/qnetworkinterface_win.cpp
+++ b/src/network/kernel/qnetworkinterface_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface_win_p.h b/src/network/kernel/qnetworkinterface_win_p.h
index 23664647cf..c3bb4bdf47 100644
--- a/src/network/kernel/qnetworkinterface_win_p.h
+++ b/src/network/kernel/qnetworkinterface_win_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkinterface_winrt.cpp b/src/network/kernel/qnetworkinterface_winrt.cpp
index 48a96928a8..4fe30fe696 100644
--- a/src/network/kernel/qnetworkinterface_winrt.cpp
+++ b/src/network/kernel/qnetworkinterface_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,12 +65,11 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
 
     QList<HostNameInfo> hostList;
 
-    INetworkInformationStatics *hostNameStatics;
+    ComPtr<INetworkInformationStatics> hostNameStatics;
     GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_Connectivity_NetworkInformation).Get(), &hostNameStatics);
 
-    IVectorView<HostName*> *hostNames = 0;
+    ComPtr<IVectorView<HostName *>> hostNames;
     hostNameStatics->GetHostNames(&hostNames);
-    hostNameStatics->Release();
     if (!hostNames)
         return interfaces;
 
@@ -86,7 +77,7 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
     hostNames->get_Size(&hostNameCount);
     for (unsigned i = 0; i < hostNameCount; ++i) {
         HostNameInfo hostInfo;
-        IHostName *hostName;
+        ComPtr<IHostName> hostName;
         hostNames->GetAt(i, &hostName);
 
         HostNameType type;
@@ -94,20 +85,17 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
         if (type == HostNameType_DomainName)
             continue;
 
-        IIPInformation *ipInformation;
+        ComPtr<IIPInformation> ipInformation;
         hostName->get_IPInformation(&ipInformation);
-        INetworkAdapter *currentAdapter;
+        ComPtr<INetworkAdapter> currentAdapter;
         ipInformation->get_NetworkAdapter(&currentAdapter);
 
         currentAdapter->get_NetworkAdapterId(&hostInfo.adapterId);
-        currentAdapter->Release();
 
-        IReference<unsigned char> *prefixLengthReference;
+        ComPtr<IReference<unsigned char>> prefixLengthReference;
         ipInformation->get_PrefixLength(&prefixLengthReference);
-        ipInformation->Release();
 
         prefixLengthReference->get_Value(&hostInfo.prefixLength);
-        prefixLengthReference->Release();
 
         // invalid prefixes
         if ((type == HostNameType_Ipv4 && hostInfo.prefixLength > 32)
@@ -116,20 +104,17 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
 
         HString name;
         hostName->get_CanonicalName(name.GetAddressOf());
-        hostName->Release();
         UINT32 length;
         PCWSTR rawString = name.GetRawBuffer(&length);
         hostInfo.address = QString::fromWCharArray(rawString, length);
 
         hostList << hostInfo;
     }
-    hostNames->Release();
 
     INetworkInformationStatics *networkInfoStatics;
     GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_Connectivity_NetworkInformation).Get(), &networkInfoStatics);
-    IVectorView<ConnectionProfile *> *connectionProfiles = 0;
+    ComPtr<IVectorView<ConnectionProfile *>> connectionProfiles;
     networkInfoStatics->GetConnectionProfiles(&connectionProfiles);
-    networkInfoStatics->Release();
     if (!connectionProfiles)
         return interfaces;
 
@@ -139,7 +124,7 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
         QNetworkInterfacePrivate *iface = new QNetworkInterfacePrivate;
         interfaces << iface;
 
-        IConnectionProfile *profile;
+        ComPtr<IConnectionProfile> profile;
         connectionProfiles->GetAt(i, &profile);
 
         NetworkConnectivityLevel connectivityLevel;
@@ -147,16 +132,14 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
         if (connectivityLevel != NetworkConnectivityLevel_None)
             iface->flags = QNetworkInterface::IsUp | QNetworkInterface::IsRunning;
 
-        INetworkAdapter *adapter;
+        ComPtr<INetworkAdapter> adapter;
         profile->get_NetworkAdapter(&adapter);
-        profile->Release();
         UINT32 type;
         adapter->get_IanaInterfaceType(&type);
         if (type == 23)
             iface->flags |= QNetworkInterface::IsPointToPoint;
         GUID id;
         adapter->get_NetworkAdapterId(&id);
-        adapter->Release();
         OLECHAR adapterName[39]={0};
         StringFromGUID2(id, adapterName, 39);
         iface->name = QString::fromWCharArray(adapterName);
@@ -179,7 +162,6 @@ static QList<QNetworkInterfacePrivate *> interfaceListing()
             --i;
         }
     }
-    connectionProfiles->Release();
     return interfaces;
 }
 
diff --git a/src/network/kernel/qnetworkproxy.cpp b/src/network/kernel/qnetworkproxy.cpp
index e797eaaed4..7bce204b6b 100644
--- a/src/network/kernel/qnetworkproxy.cpp
+++ b/src/network/kernel/qnetworkproxy.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkproxy.h b/src/network/kernel/qnetworkproxy.h
index 153c84028a..195209be74 100644
--- a/src/network/kernel/qnetworkproxy.h
+++ b/src/network/kernel/qnetworkproxy.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkproxy_blackberry.cpp b/src/network/kernel/qnetworkproxy_blackberry.cpp
index c0f5c43a78..cb34292a23 100644
--- a/src/network/kernel/qnetworkproxy_blackberry.cpp
+++ b/src/network/kernel/qnetworkproxy_blackberry.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkproxy_generic.cpp b/src/network/kernel/qnetworkproxy_generic.cpp
index c576719076..4c958792fb 100644
--- a/src/network/kernel/qnetworkproxy_generic.cpp
+++ b/src/network/kernel/qnetworkproxy_generic.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkproxy_mac.cpp b/src/network/kernel/qnetworkproxy_mac.cpp
index 4a4acb59d4..7d262467c3 100644
--- a/src/network/kernel/qnetworkproxy_mac.cpp
+++ b/src/network/kernel/qnetworkproxy_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkproxy_p.h b/src/network/kernel/qnetworkproxy_p.h
index bda0fbe690..2fcee90fdf 100644
--- a/src/network/kernel/qnetworkproxy_p.h
+++ b/src/network/kernel/qnetworkproxy_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qnetworkproxy_win.cpp b/src/network/kernel/qnetworkproxy_win.cpp
index e16d7e557e..da2c020a65 100644
--- a/src/network/kernel/qnetworkproxy_win.cpp
+++ b/src/network/kernel/qnetworkproxy_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qurlinfo.cpp b/src/network/kernel/qurlinfo.cpp
index a4200789cd..4fc2d658b3 100644
--- a/src/network/kernel/qurlinfo.cpp
+++ b/src/network/kernel/qurlinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/kernel/qurlinfo_p.h b/src/network/kernel/qurlinfo_p.h
index 31eb0730d3..c344431f9b 100644
--- a/src/network/kernel/qurlinfo_p.h
+++ b/src/network/kernel/qurlinfo_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/network.pro b/src/network/network.pro
index 79e357e0cb..4cced923f7 100644
--- a/src/network/network.pro
+++ b/src/network/network.pro
@@ -25,3 +25,14 @@ include(socket/socket.pri)
 include(ssl/ssl.pri)
 
 QMAKE_LIBS += $$QMAKE_LIBS_NETWORK
+
+ANDROID_BUNDLED_JAR_DEPENDENCIES = \
+    jar/QtAndroidBearer-bundled.jar
+ANDROID_JAR_DEPENDENCIES = \
+    jar/QtAndroidBearer.jar
+ANDROID_LIB_DEPENDENCIES = \
+    plugins/bearer/libqandroidbearer.so
+MODULE_PLUGIN_TYPES = \
+    bearer
+ANDROID_PERMISSIONS += \
+    android.permission.ACCESS_NETWORK_STATE
diff --git a/src/network/socket/qabstractsocket.cpp b/src/network/socket/qabstractsocket.cpp
index e572745d51..e843597a96 100644
--- a/src/network/socket/qabstractsocket.cpp
+++ b/src/network/socket/qabstractsocket.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -2420,7 +2412,7 @@ qint64 QAbstractSocket::readData(char *data, qint64 maxSize)
         return 0;
 
     // This is for a buffered QTcpSocket
-    if (d->isBuffered && d->buffer.isEmpty())
+    if (d->isBuffered)
         // if we're still connected, return 0 indicating there may be more data in the future
         // if we're not connected, return -1 indicating EOF
         return d->state == QAbstractSocket::ConnectedState ? qint64(0) : qint64(-1);
diff --git a/src/network/socket/qabstractsocket.h b/src/network/socket/qabstractsocket.h
index 8b019cf0fb..35e9ea1aac 100644
--- a/src/network/socket/qabstractsocket.h
+++ b/src/network/socket/qabstractsocket.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qabstractsocket_p.h b/src/network/socket/qabstractsocket_p.h
index f166b0f518..6d260228de 100644
--- a/src/network/socket/qabstractsocket_p.h
+++ b/src/network/socket/qabstractsocket_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qabstractsocketengine.cpp b/src/network/socket/qabstractsocketengine.cpp
index d8abe01241..a22f23bcc5 100644
--- a/src/network/socket/qabstractsocketengine.cpp
+++ b/src/network/socket/qabstractsocketengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qabstractsocketengine_p.h b/src/network/socket/qabstractsocketengine_p.h
index 6a30012562..cde7c1159d 100644
--- a/src/network/socket/qabstractsocketengine_p.h
+++ b/src/network/socket/qabstractsocketengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qhttpsocketengine.cpp b/src/network/socket/qhttpsocketengine.cpp
index 9f3c29e207..b754e98b19 100644
--- a/src/network/socket/qhttpsocketengine.cpp
+++ b/src/network/socket/qhttpsocketengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qhttpsocketengine_p.h b/src/network/socket/qhttpsocketengine_p.h
index 7567772517..0448293981 100644
--- a/src/network/socket/qhttpsocketengine_p.h
+++ b/src/network/socket/qhttpsocketengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalserver.cpp b/src/network/socket/qlocalserver.cpp
index d268a238e0..39a892d9f9 100644
--- a/src/network/socket/qlocalserver.cpp
+++ b/src/network/socket/qlocalserver.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalserver.h b/src/network/socket/qlocalserver.h
index b5791db653..c22ab89312 100644
--- a/src/network/socket/qlocalserver.h
+++ b/src/network/socket/qlocalserver.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalserver_p.h b/src/network/socket/qlocalserver_p.h
index 04ced39adf..b241009751 100644
--- a/src/network/socket/qlocalserver_p.h
+++ b/src/network/socket/qlocalserver_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalserver_tcp.cpp b/src/network/socket/qlocalserver_tcp.cpp
index de4acd9111..58cbf998f5 100644
--- a/src/network/socket/qlocalserver_tcp.cpp
+++ b/src/network/socket/qlocalserver_tcp.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalserver_unix.cpp b/src/network/socket/qlocalserver_unix.cpp
index 51a33a4b35..149d89c000 100644
--- a/src/network/socket/qlocalserver_unix.cpp
+++ b/src/network/socket/qlocalserver_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalserver_win.cpp b/src/network/socket/qlocalserver_win.cpp
index 760ea99b7c..36e8c948f0 100644
--- a/src/network/socket/qlocalserver_win.cpp
+++ b/src/network/socket/qlocalserver_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalsocket.cpp b/src/network/socket/qlocalsocket.cpp
index f7033893bc..164117e84f 100644
--- a/src/network/socket/qlocalsocket.cpp
+++ b/src/network/socket/qlocalsocket.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalsocket.h b/src/network/socket/qlocalsocket.h
index 427dab1def..c0429d3a1f 100644
--- a/src/network/socket/qlocalsocket.h
+++ b/src/network/socket/qlocalsocket.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalsocket_p.h b/src/network/socket/qlocalsocket_p.h
index 78c1bb82ee..6680e0332f 100644
--- a/src/network/socket/qlocalsocket_p.h
+++ b/src/network/socket/qlocalsocket_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalsocket_tcp.cpp b/src/network/socket/qlocalsocket_tcp.cpp
index 0bf0cc0654..30cc67c4b1 100644
--- a/src/network/socket/qlocalsocket_tcp.cpp
+++ b/src/network/socket/qlocalsocket_tcp.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalsocket_unix.cpp b/src/network/socket/qlocalsocket_unix.cpp
index 4af584b345..57aab2cc77 100644
--- a/src/network/socket/qlocalsocket_unix.cpp
+++ b/src/network/socket/qlocalsocket_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qlocalsocket_win.cpp b/src/network/socket/qlocalsocket_win.cpp
index 6fef819eee..71016f131a 100644
--- a/src/network/socket/qlocalsocket_win.cpp
+++ b/src/network/socket/qlocalsocket_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qnativesocketengine.cpp b/src/network/socket/qnativesocketengine.cpp
index 6bf8626f97..c19815034d 100644
--- a/src/network/socket/qnativesocketengine.cpp
+++ b/src/network/socket/qnativesocketengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -430,8 +422,8 @@ bool QNativeSocketEngine::initialize(qintptr socketDescriptor, QAbstractSocket::
     // determine socket type and protocol
     if (!d->fetchConnectionParameters()) {
 #if defined (QNATIVESOCKETENGINE_DEBUG)
-        qDebug("QNativeSocketEngine::initialize(socketDescriptor == %i) failed: %s",
-               socketDescriptor, d->socketErrorString.toLatin1().constData());
+        qDebug() << "QNativeSocketEngine::initialize(socketDescriptor) failed:"
+                 << socketDescriptor << d->socketErrorString;
 #endif
         d->socketDescriptor = -1;
         return false;
diff --git a/src/network/socket/qnativesocketengine_p.h b/src/network/socket/qnativesocketengine_p.h
index fc1afa48c9..67412ca326 100644
--- a/src/network/socket/qnativesocketengine_p.h
+++ b/src/network/socket/qnativesocketengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qnativesocketengine_unix.cpp b/src/network/socket/qnativesocketengine_unix.cpp
index ebfb2a2793..60f971a2fb 100644
--- a/src/network/socket/qnativesocketengine_unix.cpp
+++ b/src/network/socket/qnativesocketengine_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -154,7 +146,8 @@ bool QNativeSocketEnginePrivate::createNewSocket(QAbstractSocket::SocketType soc
     }
 
     if (socket < 0) {
-        switch (errno) {
+        int ecopy = errno;
+        switch (ecopy) {
         case EPROTONOSUPPORT:
         case EAFNOSUPPORT:
         case EINVAL:
@@ -173,9 +166,20 @@ bool QNativeSocketEnginePrivate::createNewSocket(QAbstractSocket::SocketType soc
             break;
         }
 
+#if defined (QNATIVESOCKETENGINE_DEBUG)
+        qDebug("QNativeSocketEnginePrivate::createNewSocket(%d, %d) == false (%s)",
+               socketType, socketProtocol,
+               strerror(ecopy));
+#endif
+
         return false;
     }
 
+#if defined (QNATIVESOCKETENGINE_DEBUG)
+    qDebug("QNativeSocketEnginePrivate::createNewSocket(%d, %d) == true",
+           socketType, socketProtocol);
+#endif
+
     socketDescriptor = socket;
     return true;
 }
@@ -365,7 +369,7 @@ bool QNativeSocketEnginePrivate::setOption(QNativeSocketEngine::SocketOption opt
 bool QNativeSocketEnginePrivate::nativeConnect(const QHostAddress &addr, quint16 port)
 {
 #ifdef QNATIVESOCKETENGINE_DEBUG
-    qDebug("QNativeSocketEnginePrivate::nativeConnect() : %lli", socketDescriptor);
+    qDebug() << "QNativeSocketEnginePrivate::nativeConnect() " << socketDescriptor;
 #endif
 
     struct sockaddr_in sockAddrIPv4;
@@ -405,6 +409,9 @@ bool QNativeSocketEnginePrivate::nativeConnect(const QHostAddress &addr, quint16
     }
 
     int connectResult = qt_safe_connect(socketDescriptor, sockAddrPtr, sockAddrSize);
+#if defined (QNATIVESOCKETENGINE_DEBUG)
+    int ecopy = errno;
+#endif
     if (connectResult == -1) {
         switch (errno) {
         case EISCONN:
@@ -456,7 +463,7 @@ bool QNativeSocketEnginePrivate::nativeConnect(const QHostAddress &addr, quint16
             qDebug("QNativeSocketEnginePrivate::nativeConnect(%s, %i) == false (%s)",
                    addr.toString().toLatin1().constData(), port,
                    socketState == QAbstractSocket::ConnectingState
-                   ? "Connection in progress" : socketErrorString.toLatin1().constData());
+                   ? "Connection in progress" : strerror(ecopy));
 #endif
             return false;
         }
@@ -524,6 +531,9 @@ bool QNativeSocketEnginePrivate::nativeBind(const QHostAddress &address, quint16
     }
 
     if (bindResult < 0) {
+#if defined (QNATIVESOCKETENGINE_DEBUG)
+        int ecopy = errno;
+#endif
         switch(errno) {
         case EADDRINUSE:
             setError(QAbstractSocket::AddressInUseError, AddressInuseErrorString);
@@ -543,7 +553,7 @@ bool QNativeSocketEnginePrivate::nativeBind(const QHostAddress &address, quint16
 
 #if defined (QNATIVESOCKETENGINE_DEBUG)
         qDebug("QNativeSocketEnginePrivate::nativeBind(%s, %i) == false (%s)",
-               address.toString().toLatin1().constData(), port, socketErrorString.toLatin1().constData());
+               address.toString().toLatin1().constData(), port, strerror(ecopy));
 #endif
 
         return false;
@@ -563,6 +573,9 @@ bool QNativeSocketEnginePrivate::nativeBind(const QHostAddress &address, quint16
 bool QNativeSocketEnginePrivate::nativeListen(int backlog)
 {
     if (qt_safe_listen(socketDescriptor, backlog) < 0) {
+#if defined (QNATIVESOCKETENGINE_DEBUG)
+        int ecopy = errno;
+#endif
         switch (errno) {
         case EADDRINUSE:
             setError(QAbstractSocket::AddressInUseError,
@@ -574,7 +587,7 @@ bool QNativeSocketEnginePrivate::nativeListen(int backlog)
 
 #if defined (QNATIVESOCKETENGINE_DEBUG)
         qDebug("QNativeSocketEnginePrivate::nativeListen(%i) == false (%s)",
-               backlog, socketErrorString.toLatin1().constData());
+               backlog, strerror(ecopy));
 #endif
         return false;
     }
diff --git a/src/network/socket/qnativesocketengine_win.cpp b/src/network/socket/qnativesocketengine_win.cpp
index 138d046bfc..0d6af80858 100644
--- a/src/network/socket/qnativesocketengine_win.cpp
+++ b/src/network/socket/qnativesocketengine_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qnativesocketengine_winrt.cpp b/src/network/socket/qnativesocketengine_winrt.cpp
index 1646940cb8..c3be3eb408 100644
--- a/src/network/socket/qnativesocketengine_winrt.cpp
+++ b/src/network/socket/qnativesocketengine_winrt.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,8 +43,14 @@
 #include <qelapsedtimer.h>
 #include <qthread.h>
 #include <qabstracteventdispatcher.h>
+#include <qfunctions_winrt.h>
+
+#include <private/qthread_p.h>
+#include <private/qabstractsocket_p.h>
 
-#include <private/qeventdispatcher_winrt_p.h>
+#ifndef QT_NO_SSL
+#include <QSslSocket>
+#endif
 
 #include <wrl.h>
 #include <windows.foundation.collections.h>
@@ -124,6 +122,20 @@ struct SocketHandler
 
 Q_GLOBAL_STATIC(SocketHandler, gSocketHandler)
 
+struct SocketGlobal
+{
+    SocketGlobal()
+    {
+        HRESULT hr;
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_Streams_Buffer).Get(),
+                                  &bufferFactory);
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+
+    ComPtr<IBufferFactory> bufferFactory;
+};
+Q_GLOBAL_STATIC(SocketGlobal, g)
+
 static inline QString qt_QStringFromHString(const HString &string)
 {
     UINT32 length;
@@ -131,60 +143,7 @@ static inline QString qt_QStringFromHString(const HString &string)
     return QString::fromWCharArray(rawString, length);
 }
 
-#define READ_BUFFER_SIZE 8192
-
-class ByteArrayBuffer : public Microsoft::WRL::RuntimeClass<RuntimeClassFlags<WinRtClassicComMix>,
-        IBuffer, Windows::Storage::Streams::IBufferByteAccess>
-{
-public:
-    ByteArrayBuffer(int size) : m_bytes(size, Qt::Uninitialized), m_length(0)
-    {
-    }
-
-    ByteArrayBuffer(const char *data, int size) : m_bytes(data, size), m_length(size)
-    {
-    }
-
-    HRESULT __stdcall Buffer(byte **value)
-    {
-        *value = reinterpret_cast<byte *>(m_bytes.data());
-        return S_OK;
-    }
-
-    HRESULT __stdcall get_Capacity(UINT32 *value)
-    {
-        *value = m_bytes.size();
-        return S_OK;
-    }
-
-    HRESULT __stdcall get_Length(UINT32 *value)
-    {
-        *value = m_length;
-        return S_OK;
-    }
-
-    HRESULT __stdcall put_Length(UINT32 value)
-    {
-        Q_ASSERT(value <= UINT32(m_bytes.size()));
-        m_length = value;
-        return S_OK;
-    }
-
-    ComPtr<IInputStream> inputStream() const
-    {
-        return m_stream;
-    }
-
-    void setInputStream(ComPtr<IInputStream> stream)
-    {
-        m_stream = stream;
-    }
-
-private:
-    QByteArray m_bytes;
-    UINT32 m_length;
-    ComPtr<IInputStream> m_stream;
-};
+#define READ_BUFFER_SIZE 65536
 
 template <typename T>
 static AsyncStatus opStatus(const ComPtr<T> &op)
@@ -207,6 +166,12 @@ static AsyncStatus opStatus(const ComPtr<T> &op)
 QNativeSocketEngine::QNativeSocketEngine(QObject *parent)
     : QAbstractSocketEngine(*new QNativeSocketEnginePrivate(), parent)
 {
+#ifndef QT_NO_SSL
+    Q_D(QNativeSocketEngine);
+    if (parent)
+        d->sslSocket = qobject_cast<QSslSocket *>(parent->parent());
+#endif
+
     connect(this, SIGNAL(connectionReady()), SLOT(connectionNotification()), Qt::QueuedConnection);
     connect(this, SIGNAL(readReady()), SLOT(readNotification()), Qt::QueuedConnection);
     connect(this, SIGNAL(writeReady()), SLOT(writeNotification()), Qt::QueuedConnection);
@@ -239,16 +204,14 @@ bool QNativeSocketEngine::initialize(qintptr socketDescriptor, QAbstractSocket::
     if (isValid())
         close();
 
-    d->socketDescriptor = socketDescriptor;
-
     // Currently, only TCP sockets are initialized this way.
-    SocketHandler *handler = gSocketHandler();
-    d->tcp = handler->pendingTcpSockets.take(socketDescriptor);
+    d->socketDescriptor = qintptr(gSocketHandler->pendingTcpSockets.take(socketDescriptor));
     d->socketType = QAbstractSocket::TcpSocket;
 
-    if (!d->tcp || !d->fetchConnectionParameters()) {
+    if (!d->socketDescriptor || !d->fetchConnectionParameters()) {
         d->setError(QAbstractSocket::UnsupportedSocketOperationError,
             d->InvalidSocketErrorString);
+        d->socketDescriptor = -1;
         return false;
     }
 
@@ -287,68 +250,23 @@ bool QNativeSocketEngine::connectToHostByName(const QString &name, quint16 port)
         return false;
     }
 
-    ComPtr<IAsyncAction> op;
     const QString portString = QString::number(port);
     HStringReference portReference(reinterpret_cast<LPCWSTR>(portString.utf16()));
     HRESULT hr = E_FAIL;
     if (d->socketType == QAbstractSocket::TcpSocket)
-        hr = d->tcp->ConnectAsync(remoteHost.Get(), portReference.Get(), &op);
+        hr = d->tcpSocket()->ConnectAsync(remoteHost.Get(), portReference.Get(), &d->connectOp);
     else if (d->socketType == QAbstractSocket::UdpSocket)
-        hr = d->udp->ConnectAsync(remoteHost.Get(), portReference.Get(), &op);
+        hr = d->udpSocket()->ConnectAsync(remoteHost.Get(), portReference.Get(), &d->connectOp);
     if (FAILED(hr)) {
         qWarning("QNativeSocketEnginePrivate::nativeConnect:: Could not obtain connect action");
         return false;
     }
-
-    hr = op->put_Completed(Callback<IAsyncActionCompletedHandler>(
-                               d, &QNativeSocketEnginePrivate::handleConnectToHost).Get());
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Unable to set host connection callback.");
-        return false;
-    }
     d->socketState = QAbstractSocket::ConnectingState;
-    while (opStatus(op) == Started)
-        d->eventLoop.processEvents();
+    hr = d->connectOp->put_Completed(Callback<IAsyncActionCompletedHandler>(
+                                         d, &QNativeSocketEnginePrivate::handleConnectToHost).Get());
+    Q_ASSERT_SUCCEEDED(hr);
 
-    AsyncStatus status = opStatus(op);
-    if (status == Error || status == Canceled)
-        return false;
-
-    if (hr == 0x8007274c) { // A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
-        d->setError(QAbstractSocket::NetworkError, d->ConnectionTimeOutErrorString);
-        d->socketState = QAbstractSocket::UnconnectedState;
-        return false;
-    }
-    if (hr == 0x8007274d) { // No connection could be made because the target machine actively refused it.
-        d->setError(QAbstractSocket::ConnectionRefusedError, d->ConnectionRefusedErrorString);
-        d->socketState = QAbstractSocket::UnconnectedState;
-        return false;
-    }
-    if (FAILED(hr)) {
-        d->setError(QAbstractSocket::UnknownSocketError, d->UnknownSocketErrorString);
-        d->socketState = QAbstractSocket::UnconnectedState;
-        return false;
-    }
-
-    if (d->socketType == QAbstractSocket::TcpSocket) {
-        IInputStream *stream;
-        hr = d->tcp->get_InputStream(&stream);
-        if (FAILED(hr))
-            return false;
-        ByteArrayBuffer *buffer = static_cast<ByteArrayBuffer *>(d->readBuffer.Get());
-        buffer->setInputStream(stream);
-        ComPtr<IAsyncBufferOperation> op;
-        hr = stream->ReadAsync(buffer, READ_BUFFER_SIZE, InputStreamOptions_Partial, &op);
-        if (FAILED(hr))
-            return false;
-        hr = op->put_Completed(Callback<SocketReadCompletedHandler>(d, &QNativeSocketEnginePrivate::handleReadyRead).Get());
-        if (FAILED(hr)) {
-            qErrnoWarning(hr, "Failed to set socket read callback.");
-            return false;
-        }
-    }
-    d->socketState = QAbstractSocket::ConnectedState;
-    return true;
+    return d->socketState == QAbstractSocket::ConnectedState;
 }
 
 bool QNativeSocketEngine::bind(const QHostAddress &address, quint16 port)
@@ -385,7 +303,7 @@ bool QNativeSocketEngine::bind(const QHostAddress &address, quint16 port)
             return false;
         }
     } else if (d->socketType == QAbstractSocket::UdpSocket) {
-        hr = d->udp->BindEndpointAsync(hostAddress.Get(), portString.Get(), &op);
+        hr = d->udpSocket()->BindEndpointAsync(hostAddress.Get(), portString.Get(), &op);
         if (FAILED(hr)) {
             qErrnoWarning(hr, "Unable to bind socket."); // ### Set error message
             return false;
@@ -447,13 +365,16 @@ int QNativeSocketEngine::accept()
     if (d->socketType == QAbstractSocket::TcpSocket) {
         IStreamSocket *socket = d->pendingConnections.takeFirst();
 
-        IInputStream *stream;
-        socket->get_InputStream(&stream);
-        // TODO: delete buffer and stream on socket close
-        ByteArrayBuffer *buffer = static_cast<ByteArrayBuffer *>(d->readBuffer.Get());
-        buffer->setInputStream(stream);
+        HRESULT hr;
+        ComPtr<IBuffer> buffer;
+        hr = g->bufferFactory->Create(READ_BUFFER_SIZE, &buffer);
+        Q_ASSERT_SUCCEEDED(hr);
+
+        ComPtr<IInputStream> stream;
+        hr = socket->get_InputStream(&stream);
+        Q_ASSERT_SUCCEEDED(hr);
         ComPtr<IAsyncBufferOperation> op;
-        HRESULT hr = stream->ReadAsync(buffer, READ_BUFFER_SIZE, InputStreamOptions_Partial, &op);
+        hr = stream->ReadAsync(buffer.Get(), READ_BUFFER_SIZE, InputStreamOptions_Partial, &op);
         if (FAILED(hr)) {
             qErrnoWarning(hr, "Faild to read from the socket buffer.");
             return -1;
@@ -476,17 +397,29 @@ int QNativeSocketEngine::accept()
 void QNativeSocketEngine::close()
 {
     Q_D(QNativeSocketEngine);
+
+    if (d->connectOp) {
+        ComPtr<IAsyncInfo> info;
+        d->connectOp.As(&info);
+        if (info) {
+            info->Cancel();
+            info->Close();
+        }
+    }
+
     if (d->socketDescriptor != -1) {
-        IClosable *socket = 0;
-        if (d->socketType == QAbstractSocket::TcpSocket && d->tcp)
-            d->tcp->QueryInterface(IID_PPV_ARGS(&socket));
-        else if (d->socketType == QAbstractSocket::UdpSocket && d->udp)
-            d->udp->QueryInterface(IID_PPV_ARGS(&socket));
+        ComPtr<IClosable> socket;
+        if (d->socketType == QAbstractSocket::TcpSocket) {
+            d->tcpSocket()->QueryInterface(IID_PPV_ARGS(&socket));
+            d->tcpSocket()->Release();
+        } else if (d->socketType == QAbstractSocket::UdpSocket) {
+            d->udpSocket()->QueryInterface(IID_PPV_ARGS(&socket));
+            d->udpSocket()->Release();
+        }
 
         if (socket) {
             d->closingDown = true;
             socket->Close();
-            socket->Release();
             d->socketDescriptor = -1;
         }
         d->socketDescriptor = -1;
@@ -550,42 +483,40 @@ qint64 QNativeSocketEngine::read(char *data, qint64 maxlen)
 qint64 QNativeSocketEngine::write(const char *data, qint64 len)
 {
     Q_D(QNativeSocketEngine);
+    if (!isValid())
+        return -1;
+
     HRESULT hr = E_FAIL;
     ComPtr<IOutputStream> stream;
     if (d->socketType == QAbstractSocket::TcpSocket)
-        hr = d->tcp->get_OutputStream(&stream);
+        hr = d->tcpSocket()->get_OutputStream(&stream);
     else if (d->socketType == QAbstractSocket::UdpSocket)
-        hr = d->udp->get_OutputStream(&stream);
+        hr = d->udpSocket()->get_OutputStream(&stream);
     if (FAILED(hr)) {
         qErrnoWarning(hr, "Failed to get output stream to socket.");
         return -1;
     }
 
-    ComPtr<ByteArrayBuffer> buffer = Make<ByteArrayBuffer>(data, len);
+    ComPtr<IBuffer> buffer;
+    hr = g->bufferFactory->Create(len, &buffer);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = buffer->put_Length(len);
+    Q_ASSERT_SUCCEEDED(hr);
+    ComPtr<Windows::Storage::Streams::IBufferByteAccess> byteArrayAccess;
+    hr = buffer.As(&byteArrayAccess);
+    Q_ASSERT_SUCCEEDED(hr);
+    byte *bytes;
+    hr = byteArrayAccess->Buffer(&bytes);
+    Q_ASSERT_SUCCEEDED(hr);
+    memcpy(bytes, data, len);
     ComPtr<IAsyncOperationWithProgress<UINT32, UINT32>> op;
     hr = stream->WriteAsync(buffer.Get(), &op);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to write to socket.");
-        return -1;
-    }
-    hr = op->put_Completed(Callback<IAsyncOperationWithProgressCompletedHandler<UINT32, UINT32>>(
-                               d, &QNativeSocketEnginePrivate::handleWriteCompleted).Get());
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to set socket write callback.");
-        return -1;
-    }
-
-    while (opStatus(op) == Started)
-        d->eventLoop.processEvents();
-
-    AsyncStatus status = opStatus(op);
-    if (status == Error || status == Canceled)
-        return -1;
+    RETURN_IF_FAILED("Failed to write to stream", return -1);
 
     UINT32 bytesWritten;
-    hr = op->GetResults(&bytesWritten);
+    hr = QWinRTFunctions::await(op, &bytesWritten);
     if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get written socket length.");
+        d->setError(QAbstractSocket::SocketAccessError, QNativeSocketEnginePrivate::AccessErrorString);
         return -1;
     }
 
@@ -624,11 +555,10 @@ qint64 QNativeSocketEngine::readDatagram(char *data, qint64 maxlen, QHostAddress
         *addr = returnAddress;
         *port = returnPort;
         arg = d->pendingDatagrams.takeFirst();
+        arg->Release();
 
         // TODO: fill data
         Q_UNUSED(data);
-        arg->Release();
-        delete arg;
         --i;
         return maxlen;
     }
@@ -657,7 +587,7 @@ qint64 QNativeSocketEngine::writeDatagram(const char *data, qint64 len, const QH
     ComPtr<IOutputStream> stream;
     const QString portString = QString::number(port);
     HStringReference portRef(reinterpret_cast<LPCWSTR>(portString.utf16()));
-    if (FAILED(d->udp->GetOutputStreamAsync(remoteHost.Get(), portRef.Get(), &streamOperation)))
+    if (FAILED(d->udpSocket()->GetOutputStreamAsync(remoteHost.Get(), portRef.Get(), &streamOperation)))
         return -1;
     HRESULT hr;
     while (hr = streamOperation->GetResults(&stream) == E_ILLEGAL_METHOD_CALL)
@@ -827,29 +757,50 @@ void QNativeSocketEngine::setExceptionNotificationEnabled(bool enable)
     d->notifyOnException = enable;
 }
 
+void QNativeSocketEngine::establishRead()
+{
+    Q_D(QNativeSocketEngine);
+
+    HRESULT hr;
+    ComPtr<IInputStream> stream;
+    hr = d->tcpSocket()->get_InputStream(&stream);
+    RETURN_VOID_IF_FAILED("Failed to get socket input stream");
+
+    ComPtr<IBuffer> buffer;
+    hr = g->bufferFactory->Create(READ_BUFFER_SIZE, &buffer);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    ComPtr<IAsyncBufferOperation> op;
+    hr = stream->ReadAsync(buffer.Get(), READ_BUFFER_SIZE, InputStreamOptions_Partial, &op);
+    RETURN_VOID_IF_FAILED("Failed to initiate socket read");
+    hr = op->put_Completed(Callback<SocketReadCompletedHandler>(d, &QNativeSocketEnginePrivate::handleReadyRead).Get());
+    Q_ASSERT_SUCCEEDED(hr);
+}
+
 bool QNativeSocketEnginePrivate::createNewSocket(QAbstractSocket::SocketType socketType, QAbstractSocket::NetworkLayerProtocol &socketProtocol)
 {
     Q_UNUSED(socketProtocol);
-    SocketHandler *handler = gSocketHandler();
     switch (socketType) {
     case QAbstractSocket::TcpSocket: {
-        if (FAILED(RoActivateInstance(HString::MakeReference(RuntimeClass_Windows_Networking_Sockets_StreamSocket).Get(),
-                                      reinterpret_cast<IInspectable **>(&tcp)))) {
+        ComPtr<IStreamSocket> socket;
+        HRESULT hr = RoActivateInstance(HString::MakeReference(RuntimeClass_Windows_Networking_Sockets_StreamSocket).Get(), &socket);
+        if (FAILED(hr)) {
             qWarning("Failed to create StreamSocket instance");
             return false;
         }
-        socketDescriptor = ++handler->socketCount;
+        socketDescriptor = qintptr(socket.Detach());
         return true;
     }
     case QAbstractSocket::UdpSocket: {
-        if (FAILED(RoActivateInstance(HString::MakeReference(RuntimeClass_Windows_Networking_Sockets_DatagramSocket).Get(),
-                                      reinterpret_cast<IInspectable **>(&udp)))) {
+        ComPtr<IDatagramSocket> socket;
+        HRESULT hr = RoActivateInstance(HString::MakeReference(RuntimeClass_Windows_Networking_Sockets_DatagramSocket).Get(), &socket);
+        if (FAILED(hr)) {
             qWarning("Failed to create stream socket");
             return false;
         }
         EventRegistrationToken token;
-        udp->add_MessageReceived(Callback<DatagramReceivedHandler>(this, &QNativeSocketEnginePrivate::handleNewDatagram).Get(), &token);
-        socketDescriptor = ++handler->socketCount;
+        socketDescriptor = qintptr(socket.Detach());
+        udpSocket()->add_MessageReceived(Callback<DatagramReceivedHandler>(this, &QNativeSocketEnginePrivate::handleNewDatagram).Get(), &token);
         return true;
     }
     default:
@@ -866,9 +817,8 @@ QNativeSocketEnginePrivate::QNativeSocketEnginePrivate()
     , notifyOnException(false)
     , closingDown(false)
     , socketDescriptor(-1)
+    , sslSocket(Q_NULLPTR)
 {
-    ComPtr<ByteArrayBuffer> buffer = Make<ByteArrayBuffer>(READ_BUFFER_SIZE);
-    readBuffer = buffer;
 }
 
 QNativeSocketEnginePrivate::~QNativeSocketEnginePrivate()
@@ -982,7 +932,7 @@ int QNativeSocketEnginePrivate::option(QAbstractSocketEngine::SocketOption opt)
 {
     ComPtr<IStreamSocketControl> control;
     if (socketType == QAbstractSocket::TcpSocket) {
-        if (FAILED(tcp->get_Control(&control))) {
+        if (FAILED(tcpSocket()->get_Control(&control))) {
             qWarning("QNativeSocketEnginePrivate::option: Could not obtain socket control");
             return -1;
         }
@@ -1038,7 +988,7 @@ bool QNativeSocketEnginePrivate::setOption(QAbstractSocketEngine::SocketOption o
 {
     ComPtr<IStreamSocketControl> control;
     if (socketType == QAbstractSocket::TcpSocket) {
-        if (FAILED(tcp->get_Control(&control))) {
+        if (FAILED(tcpSocket()->get_Control(&control))) {
             qWarning("QNativeSocketEnginePrivate::setOption: Could not obtain socket control");
             return false;
         }
@@ -1102,7 +1052,7 @@ bool QNativeSocketEnginePrivate::fetchConnectionParameters()
         ComPtr<IHostName> hostName;
         HString tmpHString;
         ComPtr<IStreamSocketInformation> info;
-        if (FAILED(tcp->get_Information(&info))) {
+        if (FAILED(tcpSocket()->get_Information(&info))) {
             qWarning("QNativeSocketEnginePrivate::fetchConnectionParameters: Could not obtain socket info");
             return false;
         }
@@ -1131,7 +1081,7 @@ bool QNativeSocketEnginePrivate::fetchConnectionParameters()
         ComPtr<IHostName> hostName;
         HString tmpHString;
         ComPtr<IDatagramSocketInformation> info;
-        if (FAILED(udp->get_Information(&info))) {
+        if (FAILED(udpSocket()->get_Information(&info))) {
             qWarning("QNativeSocketEnginePrivate::fetchConnectionParameters: Could not obtain socket information");
             return false;
         }
@@ -1171,8 +1121,46 @@ HRESULT QNativeSocketEnginePrivate::handleClientConnection(IStreamSocketListener
     return S_OK;
 }
 
-HRESULT QNativeSocketEnginePrivate::handleConnectToHost(ABI::Windows::Foundation::IAsyncAction *, ABI::Windows::Foundation::AsyncStatus)
+HRESULT QNativeSocketEnginePrivate::handleConnectToHost(IAsyncAction *action, AsyncStatus)
 {
+    Q_Q(QNativeSocketEngine);
+
+    HRESULT hr = action->GetResults();
+    if (wasDeleted || !connectOp) // Protect against a late callback
+        return S_OK;
+
+    connectOp.Reset();
+    switch (hr) {
+    case 0x8007274c: // A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
+        setError(QAbstractSocket::NetworkError, ConnectionTimeOutErrorString);
+        socketState = QAbstractSocket::UnconnectedState;
+        return S_OK;
+    case 0x80072751: // A socket operation was attempted to an unreachable host.
+        setError(QAbstractSocket::HostNotFoundError, HostUnreachableErrorString);
+        socketState = QAbstractSocket::UnconnectedState;
+        return S_OK;
+    case 0x8007274d: // No connection could be made because the target machine actively refused it.
+        setError(QAbstractSocket::ConnectionRefusedError, ConnectionRefusedErrorString);
+        socketState = QAbstractSocket::UnconnectedState;
+        return S_OK;
+    default:
+        if (FAILED(hr)) {
+            setError(QAbstractSocket::UnknownSocketError, UnknownSocketErrorString);
+            socketState = QAbstractSocket::UnconnectedState;
+            return S_OK;
+        }
+        break;
+    }
+
+    socketState = QAbstractSocket::ConnectedState;
+    emit q->connectionReady();
+
+    // Delay the reader so that the SSL socket can upgrade
+    if (sslSocket)
+        q->connect(sslSocket, SIGNAL(encrypted()), SLOT(establishRead()));
+    else
+        q->establishRead();
+
     return S_OK;
 }
 
@@ -1185,22 +1173,25 @@ HRESULT QNativeSocketEnginePrivate::handleReadyRead(IAsyncBufferOperation *async
     if (status == Error || status == Canceled)
         return S_OK;
 
-    ByteArrayBuffer *buffer = 0;
-    HRESULT hr = asyncInfo->GetResults((IBuffer **)&buffer);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get ready read results.");
-        return S_OK;
-    }
-    UINT32 len;
-    buffer->get_Length(&len);
-    if (!len) {
+    ComPtr<IBuffer> buffer;
+    HRESULT hr = asyncInfo->GetResults(&buffer);
+    RETURN_OK_IF_FAILED("Failed to get read results buffer");
+
+    UINT32 bufferLength;
+    hr = buffer->get_Length(&bufferLength);
+    Q_ASSERT_SUCCEEDED(hr);
+    if (!bufferLength) {
         if (q->isReadNotificationEnabled())
             emit q->readReady();
         return S_OK;
     }
 
+    ComPtr<Windows::Storage::Streams::IBufferByteAccess> byteArrayAccess;
+    hr = buffer.As(&byteArrayAccess);
+    Q_ASSERT_SUCCEEDED(hr);
     byte *data;
-    buffer->Buffer(&data);
+    hr = byteArrayAccess->Buffer(&data);
+    Q_ASSERT_SUCCEEDED(hr);
 
     readMutex.lock();
     if (readBytes.atEnd()) // Everything has been read; the buffer is safe to reset
@@ -1210,15 +1201,25 @@ HRESULT QNativeSocketEnginePrivate::handleReadyRead(IAsyncBufferOperation *async
     qint64 readPos = readBytes.pos();
     readBytes.seek(readBytes.size());
     Q_ASSERT(readBytes.atEnd());
-    readBytes.write(reinterpret_cast<const char*>(data), qint64(len));
+    readBytes.write(reinterpret_cast<const char*>(data), qint64(bufferLength));
     readBytes.seek(readPos);
     readMutex.unlock();
 
     if (q->isReadNotificationEnabled())
         emit q->readReady();
 
+    ComPtr<IInputStream> stream;
+    hr = tcpSocket()->get_InputStream(&stream);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    // Reuse the stream buffer
+    hr = buffer->get_Capacity(&bufferLength);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = buffer->put_Length(0);
+    Q_ASSERT_SUCCEEDED(hr);
+
     ComPtr<IAsyncBufferOperation> op;
-    hr = buffer->inputStream()->ReadAsync(buffer, READ_BUFFER_SIZE, InputStreamOptions_Partial, &op);
+    hr = stream->ReadAsync(buffer.Get(), bufferLength, InputStreamOptions_Partial, &op);
     if (FAILED(hr)) {
         qErrnoWarning(hr, "Could not read into socket stream buffer.");
         return S_OK;
@@ -1231,32 +1232,10 @@ HRESULT QNativeSocketEnginePrivate::handleReadyRead(IAsyncBufferOperation *async
     return S_OK;
 }
 
-HRESULT QNativeSocketEnginePrivate::handleWriteCompleted(IAsyncOperationWithProgress<UINT32, UINT32> *op, AsyncStatus status)
-{
-    if (status == Error) {
-        ComPtr<IAsyncInfo> info;
-        HRESULT hr = op->QueryInterface(IID_PPV_ARGS(&info));
-        if (FAILED(hr)) {
-            qErrnoWarning(hr, "Failed to cast operation.");
-            return S_OK;
-        }
-        HRESULT errorCode;
-        hr = info->get_ErrorCode(&errorCode);
-        if (FAILED(hr)) {
-            qErrnoWarning(hr, "Failed to get error code.");
-            return S_OK;
-        }
-        qErrnoWarning(errorCode, "A socket error occurred.");
-        return S_OK;
-    }
-
-    return S_OK;
-}
-
 HRESULT QNativeSocketEnginePrivate::handleNewDatagram(IDatagramSocket *socket, IDatagramSocketMessageReceivedEventArgs *args)
 {
     Q_Q(QNativeSocketEngine);
-    Q_UNUSED(socket)
+    Q_UNUSED(socket);
     pendingDatagrams.append(args);
     emit q->readReady();
 
diff --git a/src/network/socket/qnativesocketengine_winrt_p.h b/src/network/socket/qnativesocketengine_winrt_p.h
index ec2e1b3ad4..7652a09b17 100644
--- a/src/network/socket/qnativesocketengine_winrt_p.h
+++ b/src/network/socket/qnativesocketengine_winrt_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -134,6 +126,9 @@ signals:
     void readReady();
     void writeReady();
 
+private slots:
+    void establishRead();
+
 private:
     Q_DECLARE_PRIVATE(QNativeSocketEngine)
     Q_DISABLE_COPY(QNativeSocketEngine)
@@ -192,19 +187,21 @@ public:
 
     bool checkProxy(const QHostAddress &address);
     bool fetchConnectionParameters();
+
 private:
-    union {
-        ABI::Windows::Networking::Sockets::IStreamSocket *tcp;
-        ABI::Windows::Networking::Sockets::IDatagramSocket *udp;
-    };
+    inline ABI::Windows::Networking::Sockets::IStreamSocket *tcpSocket() const
+        { return reinterpret_cast<ABI::Windows::Networking::Sockets::IStreamSocket *>(socketDescriptor); }
+    inline ABI::Windows::Networking::Sockets::IDatagramSocket *udpSocket() const
+        { return reinterpret_cast<ABI::Windows::Networking::Sockets::IDatagramSocket *>(socketDescriptor); }
     Microsoft::WRL::ComPtr<ABI::Windows::Networking::Sockets::IStreamSocketListener> tcpListener;
-    Microsoft::WRL::ComPtr<ABI::Windows::Storage::Streams::IBuffer> readBuffer;
+    Microsoft::WRL::ComPtr<ABI::Windows::Foundation::IAsyncAction> connectOp;
     QBuffer readBytes;
     QMutex readMutex;
     QList<ABI::Windows::Networking::Sockets::IDatagramSocketMessageReceivedEventArgs *> pendingDatagrams;
     QList<ABI::Windows::Networking::Sockets::IStreamSocket *> pendingConnections;
     QList<ABI::Windows::Networking::Sockets::IStreamSocket *> currentConnections;
     QEventLoop eventLoop;
+    QAbstractSocket *sslSocket;
 
     HRESULT handleBindCompleted(ABI::Windows::Foundation::IAsyncAction *, ABI::Windows::Foundation::AsyncStatus);
     HRESULT handleNewDatagram(ABI::Windows::Networking::Sockets::IDatagramSocket *socket,
@@ -213,7 +210,6 @@ private:
                                    ABI::Windows::Networking::Sockets::IStreamSocketListenerConnectionReceivedEventArgs *args);
     HRESULT handleConnectToHost(ABI::Windows::Foundation::IAsyncAction *, ABI::Windows::Foundation::AsyncStatus);
     HRESULT handleReadyRead(ABI::Windows::Foundation::IAsyncOperationWithProgress<ABI::Windows::Storage::Streams::IBuffer *, UINT32> *asyncInfo, ABI::Windows::Foundation::AsyncStatus);
-    HRESULT handleWriteCompleted(ABI::Windows::Foundation::IAsyncOperationWithProgress<UINT32, UINT32> *, ABI::Windows::Foundation::AsyncStatus);
 };
 
 QT_END_NAMESPACE
diff --git a/src/network/socket/qnet_unix_p.h b/src/network/socket/qnet_unix_p.h
index 80e23075d3..ac4eef3bbe 100644
--- a/src/network/socket/qnet_unix_p.h
+++ b/src/network/socket/qnet_unix_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qsocks5socketengine.cpp b/src/network/socket/qsocks5socketengine.cpp
index b62c4a6bef..1634352333 100644
--- a/src/network/socket/qsocks5socketengine.cpp
+++ b/src/network/socket/qsocks5socketengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qsocks5socketengine_p.h b/src/network/socket/qsocks5socketengine_p.h
index d7f1a28886..fd6e187b98 100644
--- a/src/network/socket/qsocks5socketengine_p.h
+++ b/src/network/socket/qsocks5socketengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qtcpserver.cpp b/src/network/socket/qtcpserver.cpp
index 31215ee307..ad3d529a3e 100644
--- a/src/network/socket/qtcpserver.cpp
+++ b/src/network/socket/qtcpserver.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qtcpserver.h b/src/network/socket/qtcpserver.h
index 8e25aa5a29..2098a3b97d 100644
--- a/src/network/socket/qtcpserver.h
+++ b/src/network/socket/qtcpserver.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qtcpsocket.cpp b/src/network/socket/qtcpsocket.cpp
index e6f5887095..6aef8d9a2e 100644
--- a/src/network/socket/qtcpsocket.cpp
+++ b/src/network/socket/qtcpsocket.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qtcpsocket.h b/src/network/socket/qtcpsocket.h
index ed5ce4aeed..ea1765284b 100644
--- a/src/network/socket/qtcpsocket.h
+++ b/src/network/socket/qtcpsocket.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qtcpsocket_p.h b/src/network/socket/qtcpsocket_p.h
index 389255484d..a652eab190 100644
--- a/src/network/socket/qtcpsocket_p.h
+++ b/src/network/socket/qtcpsocket_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qudpsocket.cpp b/src/network/socket/qudpsocket.cpp
index de2fc22018..b54ff96200 100644
--- a/src/network/socket/qudpsocket.cpp
+++ b/src/network/socket/qudpsocket.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/socket/qudpsocket.h b/src/network/socket/qudpsocket.h
index da6306a430..92e520a899 100644
--- a/src/network/socket/qudpsocket.h
+++ b/src/network/socket/qudpsocket.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qasn1element.cpp b/src/network/ssl/qasn1element.cpp
new file mode 100644
index 0000000000..f3f280d863
--- /dev/null
+++ b/src/network/ssl/qasn1element.cpp
@@ -0,0 +1,346 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Jeremy Lainé <jeremy.laine@m4x.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+#include "qasn1element_p.h"
+
+#include <QtCore/qdatastream.h>
+#include <QtCore/qdatetime.h>
+#include <QtCore/qvector.h>
+#include <QDebug>
+
+QT_BEGIN_NAMESPACE
+
+typedef QMap<QByteArray, QByteArray> OidNameMap;
+static OidNameMap createOidMap()
+{
+    OidNameMap oids;
+    // used by unit tests
+    oids.insert(oids.end(), QByteArrayLiteral("0.9.2342.19200300.100.1.5"), QByteArrayLiteral("favouriteDrink"));
+    oids.insert(oids.end(), QByteArrayLiteral("1.2.840.113549.1.9.1"), QByteArrayLiteral("emailAddress"));
+    oids.insert(oids.end(), QByteArrayLiteral("1.3.6.1.5.5.7.1.1"), QByteArrayLiteral("authorityInfoAccess"));
+    oids.insert(oids.end(), QByteArrayLiteral("1.3.6.1.5.5.7.48.1"), QByteArrayLiteral("OCSP"));
+    oids.insert(oids.end(), QByteArrayLiteral("1.3.6.1.5.5.7.48.2"), QByteArrayLiteral("caIssuers"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.29.14"), QByteArrayLiteral("subjectKeyIdentifier"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.29.15"), QByteArrayLiteral("keyUsage"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.29.17"), QByteArrayLiteral("subjectAltName"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.29.19"), QByteArrayLiteral("basicConstraints"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.29.35"), QByteArrayLiteral("authorityKeyIdentifier"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.10"), QByteArrayLiteral("O"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.11"), QByteArrayLiteral("OU"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.12"), QByteArrayLiteral("title"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.13"), QByteArrayLiteral("description"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.17"), QByteArrayLiteral("postalCode"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.3"), QByteArrayLiteral("CN"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.4"), QByteArrayLiteral("SN"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.41"), QByteArrayLiteral("name"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.42"), QByteArrayLiteral("GN"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.43"), QByteArrayLiteral("initials"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.46"), QByteArrayLiteral("dnQualifier"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.5"), QByteArrayLiteral("serialNumber"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.6"), QByteArrayLiteral("C"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.7"), QByteArrayLiteral("L"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.8"), QByteArrayLiteral("ST"));
+    oids.insert(oids.end(), QByteArrayLiteral("2.5.4.9"), QByteArrayLiteral("street"));
+    return oids;
+}
+Q_GLOBAL_STATIC_WITH_ARGS(OidNameMap, oidNameMap, (createOidMap()))
+
+QAsn1Element::QAsn1Element(quint8 type, const QByteArray &value)
+    : mType(type)
+    , mValue(value)
+{
+}
+
+bool QAsn1Element::read(QDataStream &stream)
+{
+    // type
+    quint8 tmpType;
+    stream >> tmpType;
+    if (!tmpType)
+        return false;
+
+    // length
+    qint64 length = 0;
+    quint8 first;
+    stream >> first;
+    if (first & 0x80) {
+        // long form
+        const quint8 bytes = (first & 0x7f);
+        if (bytes > 7)
+            return false;
+
+        quint8 b;
+        for (int i = 0; i < bytes; i++) {
+            stream >> b;
+            length = (length << 8) | b;
+        }
+    } else {
+        // short form
+        length = (first & 0x7f);
+    }
+
+    // value
+    QByteArray tmpValue;
+    tmpValue.resize(length);
+    int count = stream.readRawData(tmpValue.data(), tmpValue.size());
+    if (count != length)
+        return false;
+
+    mType = tmpType;
+    mValue.swap(tmpValue);
+    return true;
+}
+
+bool QAsn1Element::read(const QByteArray &data)
+{
+    QDataStream stream(data);
+    return read(stream);
+}
+
+void QAsn1Element::write(QDataStream &stream) const
+{
+    // type
+    stream << mType;
+
+    // length
+    qint64 length = mValue.size();
+    if (length >= 128) {
+        // long form
+        quint8 encodedLength = 0x80;
+        QByteArray ba;
+        while (length) {
+            ba.prepend(quint8((length & 0xff)));
+            length >>= 8;
+            encodedLength += 1;
+        }
+        stream << encodedLength;
+        stream.writeRawData(ba.data(), ba.size());
+    } else {
+        // short form
+        stream << quint8(length);
+    }
+
+    // value
+    stream.writeRawData(mValue.data(), mValue.size());
+}
+
+QAsn1Element QAsn1Element::fromBool(bool val)
+{
+    return QAsn1Element(QAsn1Element::BooleanType,
+        QByteArray(1, val ? 0xff : 0x00));
+}
+
+QAsn1Element QAsn1Element::fromInteger(unsigned int val)
+{
+    QAsn1Element elem(QAsn1Element::IntegerType);
+    while (val > 127) {
+        elem.mValue.prepend(val & 0xff);
+        val >>= 8;
+    }
+    elem.mValue.prepend(val & 0x7f);
+    return elem;
+}
+
+QAsn1Element QAsn1Element::fromVector(const QVector<QAsn1Element> &items)
+{
+    QAsn1Element seq;
+    seq.mType = SequenceType;
+    QDataStream stream(&seq.mValue, QIODevice::WriteOnly);
+    for (QVector<QAsn1Element>::const_iterator it = items.cbegin(), end = items.cend(); it != end; ++it)
+        it->write(stream);
+    return seq;
+}
+
+QAsn1Element QAsn1Element::fromObjectId(const QByteArray &id)
+{
+    QAsn1Element elem;
+    elem.mType = ObjectIdentifierType;
+    QList<QByteArray> bits = id.split('.');
+    Q_ASSERT(bits.size() > 2);
+    elem.mValue += quint8((bits[0].toUInt() * 40 + bits[1].toUInt()));
+    for (int i = 2; i < bits.size(); ++i) {
+        char buffer[std::numeric_limits<unsigned int>::digits / 7 + 2];
+        char *pBuffer = buffer + sizeof(buffer);
+        *--pBuffer = '\0';
+        unsigned int node = bits[i].toUInt();
+        *--pBuffer = quint8((node & 0x7f));
+        node >>= 7;
+        while (node) {
+            *--pBuffer = quint8(((node & 0x7f) | 0x80));
+            node >>= 7;
+        }
+        elem.mValue += pBuffer;
+    }
+    return elem;
+}
+
+bool QAsn1Element::toBool(bool *ok) const
+{
+    if (*this == fromBool(true)) {
+        if (ok)
+            *ok = true;
+        return true;
+    } else if (*this == fromBool(false)) {
+        if (ok)
+            *ok = true;
+        return false;
+    } else {
+        if (ok)
+            *ok = false;
+        return false;
+    }
+}
+
+QDateTime QAsn1Element::toDateTime() const
+{
+    if (mValue.endsWith('Z')) {
+        if (mType == UtcTimeType && mValue.size() == 13)
+            return QDateTime(QDate(2000 + mValue.mid(0, 2).toInt(),
+                                   mValue.mid(2, 2).toInt(),
+                                   mValue.mid(4, 2).toInt()),
+                             QTime(mValue.mid(6, 2).toInt(),
+                                   mValue.mid(8, 2).toInt(),
+                                   mValue.mid(10, 2).toInt()),
+                             Qt::UTC);
+        else if (mType == GeneralizedTimeType && mValue.size() == 15)
+            return QDateTime(QDate(mValue.mid(0, 4).toInt(),
+                                   mValue.mid(4, 2).toInt(),
+                                   mValue.mid(6, 2).toInt()),
+                             QTime(mValue.mid(8, 2).toInt(),
+                                   mValue.mid(10, 2).toInt(),
+                                   mValue.mid(12, 2).toInt()),
+                             Qt::UTC);
+    }
+    return QDateTime();
+}
+
+QMultiMap<QByteArray, QString> QAsn1Element::toInfo() const
+{
+    QMultiMap<QByteArray, QString> info;
+    QAsn1Element elem;
+    QDataStream issuerStream(mValue);
+    while (elem.read(issuerStream) && elem.mType == QAsn1Element::SetType) {
+        QAsn1Element issuerElem;
+        QDataStream setStream(elem.mValue);
+        if (issuerElem.read(setStream) && issuerElem.mType == QAsn1Element::SequenceType) {
+            QVector<QAsn1Element> elems = issuerElem.toVector();
+            if (elems.size() == 2) {
+                const QByteArray key = elems.front().toObjectName();
+                if (!key.isEmpty())
+                    info.insert(key, elems.back().toString());
+            }
+        }
+    }
+    return info;
+}
+
+qint64 QAsn1Element::toInteger(bool *ok) const
+{
+    if (mType != QAsn1Element::IntegerType || mValue.isEmpty()) {
+        if (ok)
+            *ok = false;
+        return 0;
+    }
+
+    // NOTE: negative numbers are not handled
+    if (mValue.at(0) & 0x80) {
+        if (ok)
+            *ok = false;
+        return 0;
+    }
+
+    qint64 value = mValue.at(0) & 0x7f;
+    for (int i = 1; i < mValue.size(); ++i)
+        value = (value << 8) | quint8(mValue.at(i));
+
+    if (ok)
+        *ok = true;
+    return value;
+}
+
+QVector<QAsn1Element> QAsn1Element::toVector() const
+{
+    QVector<QAsn1Element> items;
+    if (mType == SequenceType) {
+        QAsn1Element elem;
+        QDataStream stream(mValue);
+        while (elem.read(stream))
+            items << elem;
+    }
+    return items;
+}
+
+QByteArray QAsn1Element::toObjectId() const
+{
+    QByteArray key;
+    if (mType == ObjectIdentifierType && !mValue.isEmpty()) {
+        quint8 b = mValue[0];
+        key += QByteArray::number(b / 40) + '.' + QByteArray::number (b % 40);
+        unsigned int val = 0;
+        for (int i = 1; i < mValue.size(); ++i) {
+            b = mValue[i];
+            val = (val << 7) | (b & 0x7f);
+            if (!(b & 0x80)) {
+                key += '.' + QByteArray::number(val);
+                val = 0;
+            }
+        }
+    }
+    return key;
+}
+
+QByteArray QAsn1Element::toObjectName() const
+{
+    QByteArray key = toObjectId();
+    return oidNameMap->value(key, key);
+}
+
+QString QAsn1Element::toString() const
+{
+    if (mType == PrintableStringType || mType == TeletexStringType)
+        return QString::fromLatin1(mValue, mValue.size());
+    if (mType == Utf8StringType)
+        return QString::fromUtf8(mValue, mValue.size());
+    return QString();
+}
+
+QT_END_NAMESPACE
diff --git a/src/network/ssl/qasn1element_p.h b/src/network/ssl/qasn1element_p.h
new file mode 100644
index 0000000000..36a7c90de3
--- /dev/null
+++ b/src/network/ssl/qasn1element_p.h
@@ -0,0 +1,128 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Jeremy Lainé <jeremy.laine@m4x.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+#ifndef QASN1ELEMENT_P_H
+#define QASN1ELEMENT_P_H
+
+//
+//  W A R N I N G
+//  -------------
+//
+// This file is not part of the Qt API.  It exists for the convenience
+// of the QLibrary class.  This header file may change from
+// version to version without notice, or even be removed.
+//
+// We mean it.
+//
+
+#include <QtCore/qdatetime.h>
+#include <QtCore/qmap.h>
+
+QT_BEGIN_NAMESPACE
+
+#define RSA_ENCRYPTION_OID QByteArrayLiteral("1.2.840.113549.1.1.1")
+#define DSA_ENCRYPTION_OID QByteArrayLiteral("1.2.840.10040.4.1")
+
+class Q_AUTOTEST_EXPORT QAsn1Element
+{
+public:
+    enum ElementType {
+        // universal
+        BooleanType = 0x01,
+        IntegerType  = 0x02,
+        BitStringType  = 0x03,
+        OctetStringType = 0x04,
+        NullType = 0x05,
+        ObjectIdentifierType = 0x06,
+        Utf8StringType = 0x0c,
+        PrintableStringType = 0x13,
+        TeletexStringType = 0x14,
+        UtcTimeType = 0x17,
+        GeneralizedTimeType = 0x18,
+        SequenceType = 0x30,
+        SetType = 0x31,
+
+        // context specific
+        Context0Type = 0xA0,
+        Context3Type = 0xA3
+    };
+
+    explicit QAsn1Element(quint8 type = 0, const QByteArray &value = QByteArray());
+    bool read(QDataStream &data);
+    bool read(const QByteArray &data);
+    void write(QDataStream &data) const;
+
+    static QAsn1Element fromBool(bool val);
+    static QAsn1Element fromInteger(unsigned int val);
+    static QAsn1Element fromVector(const QVector<QAsn1Element> &items);
+    static QAsn1Element fromObjectId(const QByteArray &id);
+
+    bool toBool(bool *ok = 0) const;
+    QDateTime toDateTime() const;
+    QMultiMap<QByteArray, QString> toInfo() const;
+    qint64 toInteger(bool *ok = 0) const;
+    QVector<QAsn1Element> toVector() const;
+    QByteArray toObjectId() const;
+    QByteArray toObjectName() const;
+    QString toString() const;
+
+    quint8 type() const { return mType; }
+    QByteArray value() const { return mValue; }
+
+    friend inline bool operator==(const QAsn1Element &, const QAsn1Element &);
+    friend inline bool operator!=(const QAsn1Element &, const QAsn1Element &);
+
+private:
+    quint8 mType;
+    QByteArray mValue;
+};
+Q_DECLARE_TYPEINFO(QAsn1Element, Q_MOVABLE_TYPE);
+
+inline bool operator==(const QAsn1Element &e1, const QAsn1Element &e2)
+{ return e1.mType == e2.mType && e1.mValue == e2.mValue; }
+
+inline bool operator!=(const QAsn1Element &e1, const QAsn1Element &e2)
+{ return e1.mType != e2.mType || e1.mValue != e2.mValue; }
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/network/ssl/qssl.cpp b/src/network/ssl/qssl.cpp
index b555c885b1..63c826a3d7 100644
--- a/src/network/ssl/qssl.cpp
+++ b/src/network/ssl/qssl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qssl.h b/src/network/ssl/qssl.h
index 21d03cb703..b0a35075fc 100644
--- a/src/network/ssl/qssl.h
+++ b/src/network/ssl/qssl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslcertificate.cpp b/src/network/ssl/qsslcertificate.cpp
index a113ec156b..8d38a5fd54 100644
--- a/src/network/ssl/qsslcertificate.cpp
+++ b/src/network/ssl/qsslcertificate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -113,33 +105,23 @@
     \value EmailAddress The email address associated with the certificate
 */
 
+#ifndef QT_NO_OPENSSL
 #include "qsslsocket_openssl_symbols_p.h"
+#endif
+#ifdef Q_OS_WINRT
+#include "qsslsocket_winrt_p.h"
+#endif
+
 #include "qsslcertificate.h"
 #include "qsslcertificate_p.h"
-#include "qsslkey.h"
 #include "qsslkey_p.h"
-#include "qsslcertificateextension.h"
-#include "qsslcertificateextension_p.h"
 
-#include <QtCore/qatomic.h>
-#include <QtCore/qdatetime.h>
-#include <QtCore/qdebug.h>
 #include <QtCore/qdir.h>
 #include <QtCore/qdiriterator.h>
 #include <QtCore/qfile.h>
-#include <QtCore/qfileinfo.h>
-#include <QtCore/qmap.h>
-#include <QtCore/qmutex.h>
-#include <QtCore/private/qmutexpool_p.h>
-#include <QtCore/qstring.h>
-#include <QtCore/qstringlist.h>
-#include <QtCore/qvarlengtharray.h>
 
 QT_BEGIN_NAMESPACE
 
-// forward declaration
-static QMap<QByteArray, QString> _q_mapFromX509Name(X509_NAME *name);
-
 /*!
     Constructs a QSslCertificate by reading \a format encoded data
     from \a device and using the first certificate found. You can
@@ -200,19 +182,11 @@ QSslCertificate &QSslCertificate::operator=(const QSslCertificate &other)
 */
 
 /*!
+    \fn bool QSslCertificate::operator==(const QSslCertificate &other) const
+
     Returns \c true if this certificate is the same as \a other; otherwise
     returns \c false.
 */
-bool QSslCertificate::operator==(const QSslCertificate &other) const
-{
-    if (d == other.d)
-        return true;
-    if (d->null && other.d->null)
-        return true;
-    if (d->x509 && other.d->x509)
-        return q_X509_cmp(d->x509, other.d->x509) == 0;
-    return false;
-}
 
 /*!
     \fn bool QSslCertificate::operator!=(const QSslCertificate &other) const
@@ -222,6 +196,8 @@ bool QSslCertificate::operator==(const QSslCertificate &other) const
 */
 
 /*!
+    \fn bool QSslCertificate::isNull() const
+
     Returns \c true if this is a null certificate (i.e., a certificate
     with no contents); otherwise returns \c false.
 
@@ -229,10 +205,6 @@ bool QSslCertificate::operator==(const QSslCertificate &other) const
 
     \sa clear()
 */
-bool QSslCertificate::isNull() const
-{
-    return d->null;
-}
 
 #if QT_DEPRECATED_SINCE(5,0)
 /*!
@@ -265,6 +237,17 @@ bool QSslCertificate::isBlacklisted() const
 }
 
 /*!
+    \fn bool QSslCertificate::isSelfSigned() const
+    \since 5.4
+
+    Returns \c true if this certificate is self signed; otherwise
+    returns \c false.
+
+    A certificate is considered self-signed its issuer and subject
+    are identical.
+*/
+
+/*!
     Clears the contents of this certificate, making it a null
     certificate.
 
@@ -278,37 +261,15 @@ void QSslCertificate::clear()
 }
 
 /*!
+    \fn QByteArray QSslCertificate::version() const
     Returns the certificate's version string.
 */
-QByteArray QSslCertificate::version() const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    if (d->versionString.isEmpty() && d->x509)
-        d->versionString =
-            QByteArray::number(qlonglong(q_ASN1_INTEGER_get(d->x509->cert_info->version)) + 1);
-
-    return d->versionString;
-}
 
 /*!
+    \fn QByteArray QSslCertificate::serialNumber() const
+
     Returns the certificate's serial number string in hexadecimal format.
 */
-QByteArray QSslCertificate::serialNumber() const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    if (d->serialNumberString.isEmpty() && d->x509) {
-        ASN1_INTEGER *serialNumber = d->x509->cert_info->serialNumber;
-        QByteArray hexString;
-        hexString.reserve(serialNumber->length * 3);
-        for (int a = 0; a < serialNumber->length; ++a) {
-            hexString += QByteArray::number(serialNumber->data[a], 16).rightJustified(2, '0');
-            hexString += ':';
-        }
-        hexString.chop(1);
-        d->serialNumberString = hexString;
-    }
-    return d->serialNumberString;
-}
 
 /*!
     Returns a cryptographic digest of this certificate. By default,
@@ -320,23 +281,6 @@ QByteArray QSslCertificate::digest(QCryptographicHash::Algorithm algorithm) cons
     return QCryptographicHash::hash(toDer(), algorithm);
 }
 
-static QByteArray _q_SubjectInfoToString(QSslCertificate::SubjectInfo info)
-{
-    QByteArray str;
-    switch (info) {
-    case QSslCertificate::Organization: str = QByteArray("O"); break;
-    case QSslCertificate::CommonName: str = QByteArray("CN"); break;
-    case QSslCertificate::LocalityName: str = QByteArray("L"); break;
-    case QSslCertificate::OrganizationalUnitName: str = QByteArray("OU"); break;
-    case QSslCertificate::CountryName: str = QByteArray("C"); break;
-    case QSslCertificate::StateOrProvinceName: str = QByteArray("ST"); break;
-    case QSslCertificate::DistinguishedNameQualifier: str = QByteArray("dnQualifier"); break;
-    case QSslCertificate::SerialNumber: str = QByteArray("serialNumber"); break;
-    case QSslCertificate::EmailAddress: str = QByteArray("emailAddress"); break;
-    }
-    return str;
-}
-
 /*!
   \fn QString QSslCertificate::issuerInfo(SubjectInfo subject) const
 
@@ -347,37 +291,18 @@ static QByteArray _q_SubjectInfoToString(QSslCertificate::SubjectInfo info)
 
   \sa subjectInfo()
 */
-QStringList QSslCertificate::issuerInfo(SubjectInfo info) const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    // lazy init
-    if (d->issuerInfo.isEmpty() && d->x509)
-        d->issuerInfo =
-                _q_mapFromX509Name(q_X509_get_issuer_name(d->x509));
-
-    return d->issuerInfo.values(_q_SubjectInfoToString(info));
-}
 
 /*!
+  \fn QStringList QSslCertificate::issuerInfo(const QByteArray &attribute) const
+
   Returns the issuer information for \a attribute from the certificate,
   or an empty list if there is no information for \a attribute in the
   certificate. There can be more than one entry for an attribute.
 
   \sa subjectInfo()
 */
-QStringList QSslCertificate::issuerInfo(const QByteArray &attribute) const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    // lazy init
-    if (d->issuerInfo.isEmpty() && d->x509)
-        d->issuerInfo =
-                _q_mapFromX509Name(q_X509_get_issuer_name(d->x509));
-
-    return d->issuerInfo.values(attribute);
-}
 
 /*!
-
   \fn QString QSslCertificate::subjectInfo(SubjectInfo subject) const
 
   Returns the information for the \a subject, or an empty list if
@@ -386,36 +311,20 @@ QStringList QSslCertificate::issuerInfo(const QByteArray &attribute) const
 
     \sa issuerInfo()
 */
-QStringList QSslCertificate::subjectInfo(SubjectInfo info) const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    // lazy init
-    if (d->subjectInfo.isEmpty() && d->x509)
-        d->subjectInfo =
-                _q_mapFromX509Name(q_X509_get_subject_name(d->x509));
-
-    return d->subjectInfo.values(_q_SubjectInfoToString(info));
-}
 
 /*!
+    \fn QStringList QSslCertificate::subjectInfo(const QByteArray &attribute) const
+
     Returns the subject information for \a attribute, or an empty list if
     there is no information for \a attribute in the certificate. There
     can be more than one entry for an attribute.
 
     \sa issuerInfo()
 */
-QStringList QSslCertificate::subjectInfo(const QByteArray &attribute) const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    // lazy init
-    if (d->subjectInfo.isEmpty() && d->x509)
-        d->subjectInfo =
-                _q_mapFromX509Name(q_X509_get_subject_name(d->x509));
-
-    return d->subjectInfo.values(attribute);
-}
 
 /*!
+    \fn QList<QByteArray> QSslCertificate::subjectInfoAttributes() const
+
     \since 5.0
     Returns a list of the attributes that have values in the subject
     information of this certificate. The information associated
@@ -425,18 +334,10 @@ QStringList QSslCertificate::subjectInfo(const QByteArray &attribute) const
 
     \sa subjectInfo()
 */
-QList<QByteArray> QSslCertificate::subjectInfoAttributes() const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    // lazy init
-    if (d->subjectInfo.isEmpty() && d->x509)
-        d->subjectInfo =
-                _q_mapFromX509Name(q_X509_get_subject_name(d->x509));
-
-    return d->subjectInfo.uniqueKeys();
-}
 
 /*!
+    \fn QList<QByteArray> QSslCertificate::issuerInfoAttributes() const
+
     \since 5.0
     Returns a list of the attributes that have values in the issuer
     information of this certificate. The information associated
@@ -446,16 +347,6 @@ QList<QByteArray> QSslCertificate::subjectInfoAttributes() const
 
     \sa subjectInfo()
 */
-QList<QByteArray> QSslCertificate::issuerInfoAttributes() const
-{
-    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
-    // lazy init
-    if (d->issuerInfo.isEmpty() && d->x509)
-        d->issuerInfo =
-                _q_mapFromX509Name(q_X509_get_issuer_name(d->x509));
-
-    return d->issuerInfo.uniqueKeys();
-}
 
 #if QT_DEPRECATED_SINCE(5,0)
 /*!
@@ -467,6 +358,8 @@ QList<QByteArray> QSslCertificate::issuerInfoAttributes() const
 #endif
 
 /*!
+  \fn QMultiMap<QSsl::AlternativeNameEntryType, QString> QSslCertificate::subjectAlternativeNames() const
+
   Returns the list of alternative subject names for this
   certificate. The alternative names typically contain host
   names, optionally with wildcards, that are valid for this
@@ -479,63 +372,27 @@ QList<QByteArray> QSslCertificate::issuerInfoAttributes() const
 
   \sa subjectInfo()
 */
-QMultiMap<QSsl::AlternativeNameEntryType, QString> QSslCertificate::subjectAlternativeNames() const
-{
-    QMultiMap<QSsl::AlternativeNameEntryType, QString> result;
-
-    if (!d->x509)
-        return result;
-
-    STACK_OF(GENERAL_NAME) *altNames = (STACK_OF(GENERAL_NAME)*)q_X509_get_ext_d2i(d->x509, NID_subject_alt_name, 0, 0);
-
-    if (altNames) {
-        for (int i = 0; i < q_sk_GENERAL_NAME_num(altNames); ++i) {
-            const GENERAL_NAME *genName = q_sk_GENERAL_NAME_value(altNames, i);
-            if (genName->type != GEN_DNS && genName->type != GEN_EMAIL)
-                continue;
-
-            int len = q_ASN1_STRING_length(genName->d.ia5);
-            if (len < 0 || len >= 8192) {
-                // broken name
-                continue;
-            }
-
-            const char *altNameStr = reinterpret_cast<const char *>(q_ASN1_STRING_data(genName->d.ia5));
-            const QString altName = QString::fromLatin1(altNameStr, len);
-            if (genName->type == GEN_DNS)
-                result.insert(QSsl::DnsEntry, altName);
-            else if (genName->type == GEN_EMAIL)
-                result.insert(QSsl::EmailEntry, altName);
-        }
-        q_sk_pop_free((STACK*)altNames, reinterpret_cast<void(*)(void*)>(q_sk_free));
-    }
-
-    return result;
-}
 
 /*!
+  \fn QDateTime QSslCertificate::effectiveDate() const
+
   Returns the date-time that the certificate becomes valid, or an
   empty QDateTime if this is a null certificate.
 
   \sa expiryDate()
 */
-QDateTime QSslCertificate::effectiveDate() const
-{
-    return d->notValidBefore;
-}
 
 /*!
+  \fn QDateTime QSslCertificate::expiryDate() const
+
   Returns the date-time that the certificate expires, or an empty
   QDateTime if this is a null certificate.
 
     \sa effectiveDate()
 */
-QDateTime QSslCertificate::expiryDate() const
-{
-    return d->notValidAfter;
-}
 
 /*!
+    \fn Qt::HANDLE QSslCertificate::handle() const
     Returns a pointer to the native certificate handle, if there is
     one, or a null pointer otherwise.
 
@@ -546,298 +403,41 @@ QDateTime QSslCertificate::expiryDate() const
     non-portable, and its return value may vary from platform to
     platform or change from minor release to minor release.
 */
-Qt::HANDLE QSslCertificate::handle() const
-{
-    return Qt::HANDLE(d->x509);
-}
 
 /*!
+    \fn QSslKey QSslCertificate::publicKey() const
     Returns the certificate subject's public key.
 */
-QSslKey QSslCertificate::publicKey() const
-{
-    if (!d->x509)
-        return QSslKey();
-
-    QSslKey key;
-
-    key.d->type = QSsl::PublicKey;
-    X509_PUBKEY *xkey = d->x509->cert_info->key;
-    EVP_PKEY *pkey = q_X509_PUBKEY_get(xkey);
-    Q_ASSERT(pkey);
-
-    if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_RSA) {
-        key.d->rsa = q_EVP_PKEY_get1_RSA(pkey);
-        key.d->algorithm = QSsl::Rsa;
-        key.d->isNull = false;
-    } else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA) {
-        key.d->dsa = q_EVP_PKEY_get1_DSA(pkey);
-        key.d->algorithm = QSsl::Dsa;
-        key.d->isNull = false;
-    } else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_DH) {
-        // DH unsupported
-    } else {
-        // error?
-    }
-
-    q_EVP_PKEY_free(pkey);
-    return key;
-}
-
-/*
- * Convert unknown extensions to a QVariant.
- */
-static QVariant x509UnknownExtensionToValue(X509_EXTENSION *ext)
-{
-    // Get the extension specific method object if available
-    // we cast away the const-ness here because some versions of openssl
-    // don't use const for the parameters in the functions pointers stored
-    // in the object.
-    X509V3_EXT_METHOD *meth = const_cast<X509V3_EXT_METHOD *>(q_X509V3_EXT_get(ext));
-    if (!meth) {
-        ASN1_OCTET_STRING *value = q_X509_EXTENSION_get_data(ext);
-        QByteArray result( reinterpret_cast<const char *>(q_ASN1_STRING_data(value)),
-                           q_ASN1_STRING_length(value));
-        return result;
-    }
-
-    //const unsigned char *data = ext->value->data;
-    void *ext_internal = q_X509V3_EXT_d2i(ext);
-
-    // If this extension can be converted
-    if (meth->i2v && ext_internal) {
-        STACK_OF(CONF_VALUE) *val = meth->i2v(meth, ext_internal, 0);
-
-        QVariantMap map;
-        QVariantList list;
-        bool isMap = false;
-
-        for (int j = 0; j < q_SKM_sk_num(CONF_VALUE, val); j++) {
-            CONF_VALUE *nval = q_SKM_sk_value(CONF_VALUE, val, j);
-            if (nval->name && nval->value) {
-                isMap = true;
-                map[QString::fromUtf8(nval->name)] = QString::fromUtf8(nval->value);
-            } else if (nval->name) {
-                list << QString::fromUtf8(nval->name);
-            } else if (nval->value) {
-                list << QString::fromUtf8(nval->value);
-            }
-        }
-
-        if (isMap)
-            return map;
-        else
-            return list;
-    } else if (meth->i2s && ext_internal) {
-        //qDebug() << meth->i2s(meth, ext_internal);
-        QVariant result(QString::fromUtf8(meth->i2s(meth, ext_internal)));
-        return result;
-    } else if (meth->i2r && ext_internal) {
-        QByteArray result;
-
-        BIO *bio = q_BIO_new(q_BIO_s_mem());
-        if (!bio)
-            return result;
-
-        meth->i2r(meth, ext_internal, bio, 0);
-
-        char *bio_buffer;
-        long bio_size = q_BIO_get_mem_data(bio, &bio_buffer);
-        result = QByteArray(bio_buffer, bio_size);
-
-        q_BIO_free(bio);
-        return result;
-    }
-
-    return QVariant();
-}
-
-/*
- * Convert extensions to a variant. The naming of the keys of the map are
- * taken from RFC 5280, however we decided the capitalisation in the RFC
- * was too silly for the real world.
- */
-static QVariant x509ExtensionToValue(X509_EXTENSION *ext)
-{
-    ASN1_OBJECT *obj = q_X509_EXTENSION_get_object(ext);
-    int nid = q_OBJ_obj2nid(obj);
-
-    switch (nid) {
-    case NID_basic_constraints:
-        {
-            BASIC_CONSTRAINTS *basic = reinterpret_cast<BASIC_CONSTRAINTS *>(q_X509V3_EXT_d2i(ext));
-
-            QVariantMap result;
-            result[QLatin1String("ca")] = basic->ca ? true : false;
-            if (basic->pathlen)
-                result[QLatin1String("pathLenConstraint")] = (qlonglong)q_ASN1_INTEGER_get(basic->pathlen);
-
-            q_BASIC_CONSTRAINTS_free(basic);
-            return result;
-        }
-        break;
-    case NID_info_access:
-        {
-            AUTHORITY_INFO_ACCESS *info = reinterpret_cast<AUTHORITY_INFO_ACCESS *>(q_X509V3_EXT_d2i(ext));
-
-            QVariantMap result;
-            for (int i=0; i < q_SKM_sk_num(ACCESS_DESCRIPTION, info); i++) {
-                ACCESS_DESCRIPTION *ad = q_SKM_sk_value(ACCESS_DESCRIPTION, info, i);
-
-                GENERAL_NAME *name = ad->location;
-                if (name->type == GEN_URI) {
-                    int len = q_ASN1_STRING_length(name->d.uniformResourceIdentifier);
-                    if (len < 0 || len >= 8192) {
-                        // broken name
-                        continue;
-                    }
-
-                    const char *uriStr = reinterpret_cast<const char *>(q_ASN1_STRING_data(name->d.uniformResourceIdentifier));
-                    const QString uri = QString::fromUtf8(uriStr, len);
-
-                    result[QString::fromUtf8(QSslCertificatePrivate::asn1ObjectName(ad->method))] = uri;
-                } else {
-                    qWarning() << "Strange location type" << name->type;
-                }
-            }
-
-#if OPENSSL_VERSION_NUMBER >= 0x10000000L
-            q_sk_pop_free((_STACK*)info, reinterpret_cast<void(*)(void*)>(q_sk_free));
-#else
-            q_sk_pop_free((STACK*)info, reinterpret_cast<void(*)(void*)>(q_sk_free));
-#endif
-            return result;
-        }
-        break;
-    case NID_subject_key_identifier:
-        {
-            void *ext_internal = q_X509V3_EXT_d2i(ext);
-
-            // we cast away the const-ness here because some versions of openssl
-            // don't use const for the parameters in the functions pointers stored
-            // in the object.
-            X509V3_EXT_METHOD *meth = const_cast<X509V3_EXT_METHOD *>(q_X509V3_EXT_get(ext));
-
-            return QVariant(QString::fromUtf8(meth->i2s(meth, ext_internal)));
-        }
-        break;
-    case NID_authority_key_identifier:
-        {
-            AUTHORITY_KEYID *auth_key = reinterpret_cast<AUTHORITY_KEYID *>(q_X509V3_EXT_d2i(ext));
-
-            QVariantMap result;
-
-            // keyid
-            if (auth_key->keyid) {
-                QByteArray keyid(reinterpret_cast<const char *>(auth_key->keyid->data),
-                                 auth_key->keyid->length);
-                result[QLatin1String("keyid")] = keyid.toHex();
-            }
-
-            // issuer
-            // TODO: GENERAL_NAMES
-
-            // serial
-            if (auth_key->serial)
-                result[QLatin1String("serial")] = (qlonglong)q_ASN1_INTEGER_get(auth_key->serial);
-
-            q_AUTHORITY_KEYID_free(auth_key);
-            return result;
-        }
-        break;
-    }
-
-    return QVariant();
-}
-
-QSslCertificateExtension QSslCertificatePrivate::convertExtension(X509_EXTENSION *ext)
-{
-    QSslCertificateExtension result;
-
-    ASN1_OBJECT *obj = q_X509_EXTENSION_get_object(ext);
-    QByteArray oid = QSslCertificatePrivate::asn1ObjectId(obj);
-    QByteArray name = QSslCertificatePrivate::asn1ObjectName(obj);
-
-    result.d->oid = QString::fromUtf8(oid);
-    result.d->name = QString::fromUtf8(name);
-
-    bool critical = q_X509_EXTENSION_get_critical(ext);
-    result.d->critical = critical;
-
-    // Lets see if we have custom support for this one
-    QVariant extensionValue = x509ExtensionToValue(ext);
-    if (extensionValue.isValid()) {
-        result.d->value = extensionValue;
-        result.d->supported = true;
-
-        return result;
-    }
-
-    extensionValue = x509UnknownExtensionToValue(ext);
-    if (extensionValue.isValid()) {
-        result.d->value = extensionValue;
-        result.d->supported = false;
-        return result;
-    }
-
-    return result;
-}
 
 /*!
+    \fn QList<QSslCertificateExtension> QSslCertificate::extensions() const
+
     Returns a list containing the X509 extensions of this certificate.
     \since 5.0
  */
-QList<QSslCertificateExtension> QSslCertificate::extensions() const
-{
-    QList<QSslCertificateExtension> result;
-
-    if (!d->x509)
-        return result;
-
-    int count = q_X509_get_ext_count(d->x509);
-
-    for (int i=0; i < count; i++) {
-        X509_EXTENSION *ext = q_X509_get_ext(d->x509, i);
-        result << QSslCertificatePrivate::convertExtension(ext);
-    }
-
-    return result;
-}
 
 /*!
+    \fn QByteArray QSslCertificate::toPem() const
+
     Returns this certificate converted to a PEM (Base64) encoded
     representation.
 */
-QByteArray QSslCertificate::toPem() const
-{
-    if (!d->x509)
-        return QByteArray();
-    return d->QByteArray_from_X509(d->x509, QSsl::Pem);
-}
 
 /*!
+    \fn QByteArray QSslCertificate::toDer() const
+
     Returns this certificate converted to a DER (binary) encoded
     representation.
 */
-QByteArray QSslCertificate::toDer() const
-{
-    if (!d->x509)
-        return QByteArray();
-    return d->QByteArray_from_X509(d->x509, QSsl::Der);
-}
 
 /*!
+    \fn QString QSslCertificate::toText() const
+
     Returns this certificate converted to a human-readable text
     representation.
 
     \since 5.0
 */
-QString QSslCertificate::toText() const
-{
-    if (!d->x509)
-        return QString();
-    return d->text_from_X509(d->x509);
-}
 
 /*!
     Searches all files in the \a path for certificates encoded in the
@@ -963,216 +563,24 @@ QList<QSslError> QSslCertificate::verify(QList<QSslCertificate> certificateChain
     return QSslSocketBackendPrivate::verify(certificateChain, hostName);
 }
 
-void QSslCertificatePrivate::init(const QByteArray &data, QSsl::EncodingFormat format)
-{
-    if (!data.isEmpty()) {
-        QList<QSslCertificate> certs = (format == QSsl::Pem)
-            ? certificatesFromPem(data, 1)
-            : certificatesFromDer(data, 1);
-        if (!certs.isEmpty()) {
-            *this = *certs.first().d;
-            if (x509)
-                x509 = q_X509_dup(x509);
-        }
-    }
-}
-
-#define BEGINCERTSTRING "-----BEGIN CERTIFICATE-----"
-#define ENDCERTSTRING "-----END CERTIFICATE-----"
-
-// ### refactor against QSsl::pemFromDer() etc. (to avoid redundant implementations)
-QByteArray QSslCertificatePrivate::QByteArray_from_X509(X509 *x509, QSsl::EncodingFormat format)
-{
-    if (!x509) {
-        qWarning("QSslSocketBackendPrivate::X509_to_QByteArray: null X509");
-        return QByteArray();
-    }
-
-    // Use i2d_X509 to convert the X509 to an array.
-    int length = q_i2d_X509(x509, 0);
-    QByteArray array;
-    array.resize(length);
-    char *data = array.data();
-    char **dataP = &data;
-    unsigned char **dataPu = (unsigned char **)dataP;
-    if (q_i2d_X509(x509, dataPu) < 0)
-        return QByteArray();
-
-    if (format == QSsl::Der)
-        return array;
-
-    // Convert to Base64 - wrap at 64 characters.
-    array = array.toBase64();
-    QByteArray tmp;
-    for (int i = 0; i <= array.size() - 64; i += 64) {
-        tmp += QByteArray::fromRawData(array.data() + i, 64);
-        tmp += '\n';
-    }
-    if (int remainder = array.size() % 64) {
-        tmp += QByteArray::fromRawData(array.data() + array.size() - remainder, remainder);
-        tmp += '\n';
-    }
-
-    return BEGINCERTSTRING "\n" + tmp + ENDCERTSTRING "\n";
-}
-
-QString QSslCertificatePrivate::text_from_X509(X509 *x509)
-{
-    if (!x509) {
-        qWarning("QSslSocketBackendPrivate::text_from_X509: null X509");
-        return QString();
-    }
-
-    QByteArray result;
-    BIO *bio = q_BIO_new(q_BIO_s_mem());
-    if (!bio)
-        return QString();
-
-    q_X509_print(bio, x509);
-
-    QVarLengthArray<char, 16384> data;
-    int count = q_BIO_read(bio, data.data(), 16384);
-    if ( count > 0 ) {
-        result = QByteArray( data.data(), count );
-    }
-
-    q_BIO_free(bio);
-
-    return QString::fromLatin1(result);
-}
-
-QByteArray QSslCertificatePrivate::asn1ObjectId(ASN1_OBJECT *object)
-{
-    char buf[80]; // The openssl docs a buffer length of 80 should be more than enough
-    q_OBJ_obj2txt(buf, sizeof(buf), object, 1); // the 1 says always use the oid not the long name
-
-    return QByteArray(buf);
-}
-
-
-QByteArray QSslCertificatePrivate::asn1ObjectName(ASN1_OBJECT *object)
-{
-    int nid = q_OBJ_obj2nid(object);
-    if (nid != NID_undef)
-        return QByteArray(q_OBJ_nid2sn(nid));
-
-    return asn1ObjectId(object);
-}
-
-static QMap<QByteArray, QString> _q_mapFromX509Name(X509_NAME *name)
-{
-    QMap<QByteArray, QString> info;
-    for (int i = 0; i < q_X509_NAME_entry_count(name); ++i) {
-        X509_NAME_ENTRY *e = q_X509_NAME_get_entry(name, i);
-
-        QByteArray name = QSslCertificatePrivate::asn1ObjectName(q_X509_NAME_ENTRY_get_object(e));
-        unsigned char *data = 0;
-        int size = q_ASN1_STRING_to_UTF8(&data, q_X509_NAME_ENTRY_get_data(e));
-        info.insertMulti(name, QString::fromUtf8((char*)data, size));
-        q_CRYPTO_free(data);
-    }
-
-    return info;
-}
-
-QSslCertificate QSslCertificatePrivate::QSslCertificate_from_X509(X509 *x509)
-{
-    QSslCertificate certificate;
-    if (!x509 || !QSslSocket::supportsSsl())
-        return certificate;
-
-    ASN1_TIME *nbef = q_X509_get_notBefore(x509);
-    ASN1_TIME *naft = q_X509_get_notAfter(x509);
-    certificate.d->notValidBefore = q_getTimeFromASN1(nbef);
-    certificate.d->notValidAfter = q_getTimeFromASN1(naft);
-    certificate.d->null = false;
-    certificate.d->x509 = q_X509_dup(x509);
-
-    return certificate;
-}
-
-static bool matchLineFeed(const QByteArray &pem, int *offset)
-{
-    char ch = 0;
-
-    // ignore extra whitespace at the end of the line
-    while (*offset < pem.size() && (ch = pem.at(*offset)) == ' ')
-        ++*offset;
-
-    if (ch == '\n') {
-        *offset += 1;
-        return true;
-    }
-    if (ch == '\r' && pem.size() > (*offset + 1) && pem.at(*offset + 1) == '\n') {
-        *offset += 2;
-        return true;
-    }
-    return false;
-}
-
-QList<QSslCertificate> QSslCertificatePrivate::certificatesFromPem(const QByteArray &pem, int count)
-{
-    QList<QSslCertificate> certificates;
-    QSslSocketPrivate::ensureInitialized();
-
-    int offset = 0;
-    while (count == -1 || certificates.size() < count) {
-        int startPos = pem.indexOf(BEGINCERTSTRING, offset);
-        if (startPos == -1)
-            break;
-        startPos += sizeof(BEGINCERTSTRING) - 1;
-        if (!matchLineFeed(pem, &startPos))
-            break;
-
-        int endPos = pem.indexOf(ENDCERTSTRING, startPos);
-        if (endPos == -1)
-            break;
-
-        offset = endPos + sizeof(ENDCERTSTRING) - 1;
-        if (offset < pem.size() && !matchLineFeed(pem, &offset))
-            break;
-
-        QByteArray decoded = QByteArray::fromBase64(
-            QByteArray::fromRawData(pem.data() + startPos, endPos - startPos));
-#if OPENSSL_VERSION_NUMBER >= 0x00908000L
-        const unsigned char *data = (const unsigned char *)decoded.data();
-#else
-        unsigned char *data = (unsigned char *)decoded.data();
-#endif
-
-        if (X509 *x509 = q_d2i_X509(0, &data, decoded.size())) {
-            certificates << QSslCertificate_from_X509(x509);
-            q_X509_free(x509);
-        }
-    }
+/*!
+  \since 5.4
 
-    return certificates;
-}
+  Imports a PKCS#12 (pfx) file from the specified \a device. A PKCS#12
+  file is a bundle that can contain a number of certificates and keys.
+  This method reads a single \a key, its \a certificate and any
+  associated \a caCertificates from the bundle. If a \a passPhrase is
+  specified then this will be used to decrypt the bundle. Returns
+  \c true if the PKCS#12 file was successfully loaded.
 
-QList<QSslCertificate> QSslCertificatePrivate::certificatesFromDer(const QByteArray &der, int count)
+  \note The \a device must be open and ready to be read from.
+ */
+bool QSslCertificate::importPKCS12(QIODevice *device,
+                                   QSslKey *key, QSslCertificate *certificate,
+                                   QList<QSslCertificate> *caCertificates,
+                                   const QByteArray &passPhrase)
 {
-    QList<QSslCertificate> certificates;
-    QSslSocketPrivate::ensureInitialized();
-
-
-#if OPENSSL_VERSION_NUMBER >= 0x00908000L
-        const unsigned char *data = (const unsigned char *)der.data();
-#else
-        unsigned char *data = (unsigned char *)der.data();
-#endif
-    int size = der.size();
-
-    while (count == -1 || certificates.size() < count) {
-        if (X509 *x509 = q_d2i_X509(0, &data, size)) {
-            certificates << QSslCertificate_from_X509(x509);
-            q_X509_free(x509);
-        } else {
-            break;
-        }
-        size -= ((char *)data - der.data());
-    }
-
-    return certificates;
+    return QSslSocketBackendPrivate::importPKCS12(device, key, certificate, caCertificates, passPhrase);
 }
 
 // These certificates are known to be fraudulent and were created during the comodo
@@ -1237,6 +645,25 @@ bool QSslCertificatePrivate::isBlacklisted(const QSslCertificate &certificate)
     return false;
 }
 
+QByteArray QSslCertificatePrivate::subjectInfoToString(QSslCertificate::SubjectInfo info)
+{
+    QByteArray str;
+    switch (info) {
+    case QSslCertificate::Organization: str = QByteArray("O"); break;
+    case QSslCertificate::CommonName: str = QByteArray("CN"); break;
+    case QSslCertificate::LocalityName: str = QByteArray("L"); break;
+    case QSslCertificate::OrganizationalUnitName: str = QByteArray("OU"); break;
+    case QSslCertificate::CountryName: str = QByteArray("C"); break;
+    case QSslCertificate::StateOrProvinceName: str = QByteArray("ST"); break;
+    case QSslCertificate::DistinguishedNameQualifier: str = QByteArray("dnQualifier"); break;
+    case QSslCertificate::SerialNumber: str = QByteArray("serialNumber"); break;
+    case QSslCertificate::EmailAddress: str = QByteArray("emailAddress"); break;
+    }
+    return str;
+}
+
+
+
 #ifndef QT_NO_DEBUG_STREAM
 QDebug operator<<(QDebug debug, const QSslCertificate &certificate)
 {
diff --git a/src/network/ssl/qsslcertificate.h b/src/network/ssl/qsslcertificate.h
index 988071eb9d..d1290b1d42 100644
--- a/src/network/ssl/qsslcertificate.h
+++ b/src/network/ssl/qsslcertificate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -105,6 +97,7 @@ public:
     }
 #endif
     bool isBlacklisted() const;
+    bool isSelfSigned() const;
     void clear();
 
     // Certificate info
@@ -141,6 +134,11 @@ public:
 
     static QList<QSslError> verify(QList<QSslCertificate> certificateChain, const QString &hostName = QString());
 
+    static bool importPKCS12(QIODevice *device,
+                             QSslKey *key, QSslCertificate *cert,
+                             QList<QSslCertificate> *caCertificates=0,
+                             const QByteArray &passPhrase=QByteArray());
+
     Qt::HANDLE handle() const;
 
 private:
diff --git a/src/network/ssl/qsslcertificate_openssl.cpp b/src/network/ssl/qsslcertificate_openssl.cpp
new file mode 100644
index 0000000000..664f5eba08
--- /dev/null
+++ b/src/network/ssl/qsslcertificate_openssl.cpp
@@ -0,0 +1,699 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qsslsocket_openssl_symbols_p.h"
+#include "qsslcertificate_p.h"
+#include "qsslkey_p.h"
+#include "qsslcertificateextension_p.h"
+
+#include <QtCore/private/qmutexpool_p.h>
+
+QT_BEGIN_NAMESPACE
+
+// forward declaration
+static QMap<QByteArray, QString> _q_mapFromX509Name(X509_NAME *name);
+
+bool QSslCertificate::operator==(const QSslCertificate &other) const
+{
+    if (d == other.d)
+        return true;
+    if (d->null && other.d->null)
+        return true;
+    if (d->x509 && other.d->x509)
+        return q_X509_cmp(d->x509, other.d->x509) == 0;
+    return false;
+}
+
+bool QSslCertificate::isNull() const
+{
+    return d->null;
+}
+
+bool QSslCertificate::isSelfSigned() const
+{
+    if (!d->x509)
+        return false;
+
+    return (q_X509_check_issued(d->x509, d->x509) == X509_V_OK);
+}
+
+QByteArray QSslCertificate::version() const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    if (d->versionString.isEmpty() && d->x509)
+        d->versionString =
+            QByteArray::number(qlonglong(q_ASN1_INTEGER_get(d->x509->cert_info->version)) + 1);
+
+    return d->versionString;
+}
+
+QByteArray QSslCertificate::serialNumber() const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    if (d->serialNumberString.isEmpty() && d->x509) {
+        ASN1_INTEGER *serialNumber = d->x509->cert_info->serialNumber;
+        QByteArray hexString;
+        hexString.reserve(serialNumber->length * 3);
+        for (int a = 0; a < serialNumber->length; ++a) {
+            hexString += QByteArray::number(serialNumber->data[a], 16).rightJustified(2, '0');
+            hexString += ':';
+        }
+        hexString.chop(1);
+        d->serialNumberString = hexString;
+    }
+    return d->serialNumberString;
+}
+
+QStringList QSslCertificate::issuerInfo(SubjectInfo info) const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    // lazy init
+    if (d->issuerInfo.isEmpty() && d->x509)
+        d->issuerInfo =
+                _q_mapFromX509Name(q_X509_get_issuer_name(d->x509));
+
+    return d->issuerInfo.values(d->subjectInfoToString(info));
+}
+
+QStringList QSslCertificate::issuerInfo(const QByteArray &attribute) const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    // lazy init
+    if (d->issuerInfo.isEmpty() && d->x509)
+        d->issuerInfo =
+                _q_mapFromX509Name(q_X509_get_issuer_name(d->x509));
+
+    return d->issuerInfo.values(attribute);
+}
+
+QStringList QSslCertificate::subjectInfo(SubjectInfo info) const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    // lazy init
+    if (d->subjectInfo.isEmpty() && d->x509)
+        d->subjectInfo =
+                _q_mapFromX509Name(q_X509_get_subject_name(d->x509));
+
+    return d->subjectInfo.values(d->subjectInfoToString(info));
+}
+
+QStringList QSslCertificate::subjectInfo(const QByteArray &attribute) const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    // lazy init
+    if (d->subjectInfo.isEmpty() && d->x509)
+        d->subjectInfo =
+                _q_mapFromX509Name(q_X509_get_subject_name(d->x509));
+
+    return d->subjectInfo.values(attribute);
+}
+
+QList<QByteArray> QSslCertificate::subjectInfoAttributes() const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    // lazy init
+    if (d->subjectInfo.isEmpty() && d->x509)
+        d->subjectInfo =
+                _q_mapFromX509Name(q_X509_get_subject_name(d->x509));
+
+    return d->subjectInfo.uniqueKeys();
+}
+
+QList<QByteArray> QSslCertificate::issuerInfoAttributes() const
+{
+    QMutexLocker lock(QMutexPool::globalInstanceGet(d.data()));
+    // lazy init
+    if (d->issuerInfo.isEmpty() && d->x509)
+        d->issuerInfo =
+                _q_mapFromX509Name(q_X509_get_issuer_name(d->x509));
+
+    return d->issuerInfo.uniqueKeys();
+}
+
+QMultiMap<QSsl::AlternativeNameEntryType, QString> QSslCertificate::subjectAlternativeNames() const
+{
+    QMultiMap<QSsl::AlternativeNameEntryType, QString> result;
+
+    if (!d->x509)
+        return result;
+
+    STACK_OF(GENERAL_NAME) *altNames = (STACK_OF(GENERAL_NAME)*)q_X509_get_ext_d2i(d->x509, NID_subject_alt_name, 0, 0);
+
+    if (altNames) {
+        for (int i = 0; i < q_sk_GENERAL_NAME_num(altNames); ++i) {
+            const GENERAL_NAME *genName = q_sk_GENERAL_NAME_value(altNames, i);
+            if (genName->type != GEN_DNS && genName->type != GEN_EMAIL)
+                continue;
+
+            int len = q_ASN1_STRING_length(genName->d.ia5);
+            if (len < 0 || len >= 8192) {
+                // broken name
+                continue;
+            }
+
+            const char *altNameStr = reinterpret_cast<const char *>(q_ASN1_STRING_data(genName->d.ia5));
+            const QString altName = QString::fromLatin1(altNameStr, len);
+            if (genName->type == GEN_DNS)
+                result.insert(QSsl::DnsEntry, altName);
+            else if (genName->type == GEN_EMAIL)
+                result.insert(QSsl::EmailEntry, altName);
+        }
+        q_sk_pop_free((STACK*)altNames, reinterpret_cast<void(*)(void*)>(q_sk_free));
+    }
+
+    return result;
+}
+
+QDateTime QSslCertificate::effectiveDate() const
+{
+    return d->notValidBefore;
+}
+
+QDateTime QSslCertificate::expiryDate() const
+{
+    return d->notValidAfter;
+}
+
+Qt::HANDLE QSslCertificate::handle() const
+{
+    return Qt::HANDLE(d->x509);
+}
+
+QSslKey QSslCertificate::publicKey() const
+{
+    if (!d->x509)
+        return QSslKey();
+
+    QSslKey key;
+
+    key.d->type = QSsl::PublicKey;
+    X509_PUBKEY *xkey = d->x509->cert_info->key;
+    EVP_PKEY *pkey = q_X509_PUBKEY_get(xkey);
+    Q_ASSERT(pkey);
+
+    if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_RSA) {
+        key.d->rsa = q_EVP_PKEY_get1_RSA(pkey);
+        key.d->algorithm = QSsl::Rsa;
+        key.d->isNull = false;
+    } else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA) {
+        key.d->dsa = q_EVP_PKEY_get1_DSA(pkey);
+        key.d->algorithm = QSsl::Dsa;
+        key.d->isNull = false;
+    } else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_DH) {
+        // DH unsupported
+    } else {
+        // error?
+    }
+
+    q_EVP_PKEY_free(pkey);
+    return key;
+}
+
+/*
+ * Convert unknown extensions to a QVariant.
+ */
+static QVariant x509UnknownExtensionToValue(X509_EXTENSION *ext)
+{
+    // Get the extension specific method object if available
+    // we cast away the const-ness here because some versions of openssl
+    // don't use const for the parameters in the functions pointers stored
+    // in the object.
+    X509V3_EXT_METHOD *meth = const_cast<X509V3_EXT_METHOD *>(q_X509V3_EXT_get(ext));
+    if (!meth) {
+        ASN1_OCTET_STRING *value = q_X509_EXTENSION_get_data(ext);
+        QByteArray result( reinterpret_cast<const char *>(q_ASN1_STRING_data(value)),
+                           q_ASN1_STRING_length(value));
+        return result;
+    }
+
+    //const unsigned char *data = ext->value->data;
+    void *ext_internal = q_X509V3_EXT_d2i(ext);
+
+    // If this extension can be converted
+    if (meth->i2v && ext_internal) {
+        STACK_OF(CONF_VALUE) *val = meth->i2v(meth, ext_internal, 0);
+
+        QVariantMap map;
+        QVariantList list;
+        bool isMap = false;
+
+        for (int j = 0; j < q_SKM_sk_num(CONF_VALUE, val); j++) {
+            CONF_VALUE *nval = q_SKM_sk_value(CONF_VALUE, val, j);
+            if (nval->name && nval->value) {
+                isMap = true;
+                map[QString::fromUtf8(nval->name)] = QString::fromUtf8(nval->value);
+            } else if (nval->name) {
+                list << QString::fromUtf8(nval->name);
+            } else if (nval->value) {
+                list << QString::fromUtf8(nval->value);
+            }
+        }
+
+        if (isMap)
+            return map;
+        else
+            return list;
+    } else if (meth->i2s && ext_internal) {
+        //qDebug() << meth->i2s(meth, ext_internal);
+        QVariant result(QString::fromUtf8(meth->i2s(meth, ext_internal)));
+        return result;
+    } else if (meth->i2r && ext_internal) {
+        QByteArray result;
+
+        BIO *bio = q_BIO_new(q_BIO_s_mem());
+        if (!bio)
+            return result;
+
+        meth->i2r(meth, ext_internal, bio, 0);
+
+        char *bio_buffer;
+        long bio_size = q_BIO_get_mem_data(bio, &bio_buffer);
+        result = QByteArray(bio_buffer, bio_size);
+
+        q_BIO_free(bio);
+        return result;
+    }
+
+    return QVariant();
+}
+
+/*
+ * Convert extensions to a variant. The naming of the keys of the map are
+ * taken from RFC 5280, however we decided the capitalisation in the RFC
+ * was too silly for the real world.
+ */
+static QVariant x509ExtensionToValue(X509_EXTENSION *ext)
+{
+    ASN1_OBJECT *obj = q_X509_EXTENSION_get_object(ext);
+    int nid = q_OBJ_obj2nid(obj);
+
+    switch (nid) {
+    case NID_basic_constraints:
+        {
+            BASIC_CONSTRAINTS *basic = reinterpret_cast<BASIC_CONSTRAINTS *>(q_X509V3_EXT_d2i(ext));
+
+            QVariantMap result;
+            result[QLatin1String("ca")] = basic->ca ? true : false;
+            if (basic->pathlen)
+                result[QLatin1String("pathLenConstraint")] = (qlonglong)q_ASN1_INTEGER_get(basic->pathlen);
+
+            q_BASIC_CONSTRAINTS_free(basic);
+            return result;
+        }
+        break;
+    case NID_info_access:
+        {
+            AUTHORITY_INFO_ACCESS *info = reinterpret_cast<AUTHORITY_INFO_ACCESS *>(q_X509V3_EXT_d2i(ext));
+
+            QVariantMap result;
+            for (int i=0; i < q_SKM_sk_num(ACCESS_DESCRIPTION, info); i++) {
+                ACCESS_DESCRIPTION *ad = q_SKM_sk_value(ACCESS_DESCRIPTION, info, i);
+
+                GENERAL_NAME *name = ad->location;
+                if (name->type == GEN_URI) {
+                    int len = q_ASN1_STRING_length(name->d.uniformResourceIdentifier);
+                    if (len < 0 || len >= 8192) {
+                        // broken name
+                        continue;
+                    }
+
+                    const char *uriStr = reinterpret_cast<const char *>(q_ASN1_STRING_data(name->d.uniformResourceIdentifier));
+                    const QString uri = QString::fromUtf8(uriStr, len);
+
+                    result[QString::fromUtf8(QSslCertificatePrivate::asn1ObjectName(ad->method))] = uri;
+                } else {
+                    qWarning() << "Strange location type" << name->type;
+                }
+            }
+
+#if OPENSSL_VERSION_NUMBER >= 0x10000000L
+            q_sk_pop_free((_STACK*)info, reinterpret_cast<void(*)(void*)>(q_sk_free));
+#else
+            q_sk_pop_free((STACK*)info, reinterpret_cast<void(*)(void*)>(q_sk_free));
+#endif
+            return result;
+        }
+        break;
+    case NID_subject_key_identifier:
+        {
+            void *ext_internal = q_X509V3_EXT_d2i(ext);
+
+            // we cast away the const-ness here because some versions of openssl
+            // don't use const for the parameters in the functions pointers stored
+            // in the object.
+            X509V3_EXT_METHOD *meth = const_cast<X509V3_EXT_METHOD *>(q_X509V3_EXT_get(ext));
+
+            return QVariant(QString::fromUtf8(meth->i2s(meth, ext_internal)));
+        }
+        break;
+    case NID_authority_key_identifier:
+        {
+            AUTHORITY_KEYID *auth_key = reinterpret_cast<AUTHORITY_KEYID *>(q_X509V3_EXT_d2i(ext));
+
+            QVariantMap result;
+
+            // keyid
+            if (auth_key->keyid) {
+                QByteArray keyid(reinterpret_cast<const char *>(auth_key->keyid->data),
+                                 auth_key->keyid->length);
+                result[QLatin1String("keyid")] = keyid.toHex();
+            }
+
+            // issuer
+            // TODO: GENERAL_NAMES
+
+            // serial
+            if (auth_key->serial)
+                result[QLatin1String("serial")] = (qlonglong)q_ASN1_INTEGER_get(auth_key->serial);
+
+            q_AUTHORITY_KEYID_free(auth_key);
+            return result;
+        }
+        break;
+    }
+
+    return QVariant();
+}
+
+QSslCertificateExtension QSslCertificatePrivate::convertExtension(X509_EXTENSION *ext)
+{
+    QSslCertificateExtension result;
+
+    ASN1_OBJECT *obj = q_X509_EXTENSION_get_object(ext);
+    QByteArray oid = QSslCertificatePrivate::asn1ObjectId(obj);
+    QByteArray name = QSslCertificatePrivate::asn1ObjectName(obj);
+
+    result.d->oid = QString::fromUtf8(oid);
+    result.d->name = QString::fromUtf8(name);
+
+    bool critical = q_X509_EXTENSION_get_critical(ext);
+    result.d->critical = critical;
+
+    // Lets see if we have custom support for this one
+    QVariant extensionValue = x509ExtensionToValue(ext);
+    if (extensionValue.isValid()) {
+        result.d->value = extensionValue;
+        result.d->supported = true;
+
+        return result;
+    }
+
+    extensionValue = x509UnknownExtensionToValue(ext);
+    if (extensionValue.isValid()) {
+        result.d->value = extensionValue;
+        result.d->supported = false;
+        return result;
+    }
+
+    return result;
+}
+
+QList<QSslCertificateExtension> QSslCertificate::extensions() const
+{
+    QList<QSslCertificateExtension> result;
+
+    if (!d->x509)
+        return result;
+
+    int count = q_X509_get_ext_count(d->x509);
+
+    for (int i=0; i < count; i++) {
+        X509_EXTENSION *ext = q_X509_get_ext(d->x509, i);
+        result << QSslCertificatePrivate::convertExtension(ext);
+    }
+
+    return result;
+}
+
+QByteArray QSslCertificate::toPem() const
+{
+    if (!d->x509)
+        return QByteArray();
+    return d->QByteArray_from_X509(d->x509, QSsl::Pem);
+}
+
+QByteArray QSslCertificate::toDer() const
+{
+    if (!d->x509)
+        return QByteArray();
+    return d->QByteArray_from_X509(d->x509, QSsl::Der);
+}
+
+QString QSslCertificate::toText() const
+{
+    if (!d->x509)
+        return QString();
+    return d->text_from_X509(d->x509);
+}
+
+#define BEGINCERTSTRING "-----BEGIN CERTIFICATE-----"
+#define ENDCERTSTRING "-----END CERTIFICATE-----"
+
+void QSslCertificatePrivate::init(const QByteArray &data, QSsl::EncodingFormat format)
+{
+    if (!data.isEmpty()) {
+        QList<QSslCertificate> certs = (format == QSsl::Pem)
+            ? certificatesFromPem(data, 1)
+            : certificatesFromDer(data, 1);
+        if (!certs.isEmpty()) {
+            *this = *certs.first().d;
+            if (x509)
+                x509 = q_X509_dup(x509);
+        }
+    }
+}
+
+// ### refactor against QSsl::pemFromDer() etc. (to avoid redundant implementations)
+QByteArray QSslCertificatePrivate::QByteArray_from_X509(X509 *x509, QSsl::EncodingFormat format)
+{
+    if (!x509) {
+        qWarning("QSslSocketBackendPrivate::X509_to_QByteArray: null X509");
+        return QByteArray();
+    }
+
+    // Use i2d_X509 to convert the X509 to an array.
+    int length = q_i2d_X509(x509, 0);
+    QByteArray array;
+    array.resize(length);
+    char *data = array.data();
+    char **dataP = &data;
+    unsigned char **dataPu = (unsigned char **)dataP;
+    if (q_i2d_X509(x509, dataPu) < 0)
+        return QByteArray();
+
+    if (format == QSsl::Der)
+        return array;
+
+    // Convert to Base64 - wrap at 64 characters.
+    array = array.toBase64();
+    QByteArray tmp;
+    for (int i = 0; i <= array.size() - 64; i += 64) {
+        tmp += QByteArray::fromRawData(array.data() + i, 64);
+        tmp += '\n';
+    }
+    if (int remainder = array.size() % 64) {
+        tmp += QByteArray::fromRawData(array.data() + array.size() - remainder, remainder);
+        tmp += '\n';
+    }
+
+    return BEGINCERTSTRING "\n" + tmp + ENDCERTSTRING "\n";
+}
+
+QString QSslCertificatePrivate::text_from_X509(X509 *x509)
+{
+    if (!x509) {
+        qWarning("QSslSocketBackendPrivate::text_from_X509: null X509");
+        return QString();
+    }
+
+    QByteArray result;
+    BIO *bio = q_BIO_new(q_BIO_s_mem());
+    if (!bio)
+        return QString();
+
+    q_X509_print(bio, x509);
+
+    QVarLengthArray<char, 16384> data;
+    int count = q_BIO_read(bio, data.data(), 16384);
+    if ( count > 0 ) {
+        result = QByteArray( data.data(), count );
+    }
+
+    q_BIO_free(bio);
+
+    return QString::fromLatin1(result);
+}
+
+QByteArray QSslCertificatePrivate::asn1ObjectId(ASN1_OBJECT *object)
+{
+    char buf[80]; // The openssl docs a buffer length of 80 should be more than enough
+    q_OBJ_obj2txt(buf, sizeof(buf), object, 1); // the 1 says always use the oid not the long name
+
+    return QByteArray(buf);
+}
+
+
+QByteArray QSslCertificatePrivate::asn1ObjectName(ASN1_OBJECT *object)
+{
+    int nid = q_OBJ_obj2nid(object);
+    if (nid != NID_undef)
+        return QByteArray(q_OBJ_nid2sn(nid));
+
+    return asn1ObjectId(object);
+}
+
+static QMap<QByteArray, QString> _q_mapFromX509Name(X509_NAME *name)
+{
+    QMap<QByteArray, QString> info;
+    for (int i = 0; i < q_X509_NAME_entry_count(name); ++i) {
+        X509_NAME_ENTRY *e = q_X509_NAME_get_entry(name, i);
+
+        QByteArray name = QSslCertificatePrivate::asn1ObjectName(q_X509_NAME_ENTRY_get_object(e));
+        unsigned char *data = 0;
+        int size = q_ASN1_STRING_to_UTF8(&data, q_X509_NAME_ENTRY_get_data(e));
+        info.insertMulti(name, QString::fromUtf8((char*)data, size));
+        q_CRYPTO_free(data);
+    }
+
+    return info;
+}
+
+QSslCertificate QSslCertificatePrivate::QSslCertificate_from_X509(X509 *x509)
+{
+    QSslCertificate certificate;
+    if (!x509 || !QSslSocket::supportsSsl())
+        return certificate;
+
+    ASN1_TIME *nbef = q_X509_get_notBefore(x509);
+    ASN1_TIME *naft = q_X509_get_notAfter(x509);
+    certificate.d->notValidBefore = q_getTimeFromASN1(nbef);
+    certificate.d->notValidAfter = q_getTimeFromASN1(naft);
+    certificate.d->null = false;
+    certificate.d->x509 = q_X509_dup(x509);
+
+    return certificate;
+}
+
+static bool matchLineFeed(const QByteArray &pem, int *offset)
+{
+    char ch = 0;
+
+    // ignore extra whitespace at the end of the line
+    while (*offset < pem.size() && (ch = pem.at(*offset)) == ' ')
+        ++*offset;
+
+    if (ch == '\n') {
+        *offset += 1;
+        return true;
+    }
+    if (ch == '\r' && pem.size() > (*offset + 1) && pem.at(*offset + 1) == '\n') {
+        *offset += 2;
+        return true;
+    }
+    return false;
+}
+
+QList<QSslCertificate> QSslCertificatePrivate::certificatesFromPem(const QByteArray &pem, int count)
+{
+    QList<QSslCertificate> certificates;
+    QSslSocketPrivate::ensureInitialized();
+
+    int offset = 0;
+    while (count == -1 || certificates.size() < count) {
+        int startPos = pem.indexOf(BEGINCERTSTRING, offset);
+        if (startPos == -1)
+            break;
+        startPos += sizeof(BEGINCERTSTRING) - 1;
+        if (!matchLineFeed(pem, &startPos))
+            break;
+
+        int endPos = pem.indexOf(ENDCERTSTRING, startPos);
+        if (endPos == -1)
+            break;
+
+        offset = endPos + sizeof(ENDCERTSTRING) - 1;
+        if (offset < pem.size() && !matchLineFeed(pem, &offset))
+            break;
+
+        QByteArray decoded = QByteArray::fromBase64(
+            QByteArray::fromRawData(pem.data() + startPos, endPos - startPos));
+#if OPENSSL_VERSION_NUMBER >= 0x00908000L
+        const unsigned char *data = (const unsigned char *)decoded.data();
+#else
+        unsigned char *data = (unsigned char *)decoded.data();
+#endif
+
+        if (X509 *x509 = q_d2i_X509(0, &data, decoded.size())) {
+            certificates << QSslCertificate_from_X509(x509);
+            q_X509_free(x509);
+        }
+    }
+
+    return certificates;
+}
+
+QList<QSslCertificate> QSslCertificatePrivate::certificatesFromDer(const QByteArray &der, int count)
+{
+    QList<QSslCertificate> certificates;
+    QSslSocketPrivate::ensureInitialized();
+
+
+#if OPENSSL_VERSION_NUMBER >= 0x00908000L
+        const unsigned char *data = (const unsigned char *)der.data();
+#else
+        unsigned char *data = (unsigned char *)der.data();
+#endif
+    int size = der.size();
+
+    while (count == -1 || certificates.size() < count) {
+        if (X509 *x509 = q_d2i_X509(0, &data, size)) {
+            certificates << QSslCertificate_from_X509(x509);
+            q_X509_free(x509);
+        } else {
+            break;
+        }
+        size -= ((char *)data - der.data());
+    }
+
+    return certificates;
+}
+
+QT_END_NAMESPACE
diff --git a/src/network/ssl/qsslcertificate_p.h b/src/network/ssl/qsslcertificate_p.h
index 6cf6974543..f47f4effde 100644
--- a/src/network/ssl/qsslcertificate_p.h
+++ b/src/network/ssl/qsslcertificate_p.h
@@ -1,47 +1,39 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 
-#ifndef QSSLCERTIFICATE_P_H
-#define QSSLCERTIFICATE_P_H
+#ifndef QSSLCERTIFICATE_OPENSSL_P_H
+#define QSSLCERTIFICATE_OPENSSL_P_H
 
 #include "qsslcertificate.h"
 
@@ -61,10 +53,23 @@
 #include <QtCore/qdatetime.h>
 #include <QtCore/qmap.h>
 
+#ifndef QT_NO_OPENSSL
 #include <openssl/x509.h>
+#else
+struct X509;
+struct X509_EXTENSION;
+struct ASN1_OBJECT;
+#endif
+
+#ifdef Q_OS_WINRT
+#include <wrl.h>
+#include <windows.security.cryptography.certificates.h>
+#endif
 
 QT_BEGIN_NAMESPACE
 
+// forward declaration
+
 class QSslCertificatePrivate
 {
 public:
@@ -76,8 +81,10 @@ public:
 
     ~QSslCertificatePrivate()
     {
+#ifndef QT_NO_OPENSSL
         if (x509)
             q_X509_free(x509);
+#endif
     }
 
     bool null;
@@ -89,6 +96,18 @@ public:
     QDateTime notValidAfter;
     QDateTime notValidBefore;
 
+#ifdef QT_NO_OPENSSL
+    bool subjectMatchesIssuer;
+    QSsl::KeyAlgorithm publicKeyAlgorithm;
+    QByteArray publicKeyDerData;
+    QMultiMap<QSsl::AlternativeNameEntryType, QString> subjectAlternativeNames;
+    QList<QSslCertificateExtension> extensions;
+
+    QByteArray derData;
+
+    bool parse(const QByteArray &data);
+    bool parseExtension(const QByteArray &data, QSslCertificateExtension *extension);
+#endif
     X509 *x509;
 
     void init(const QByteArray &data, QSsl::EncodingFormat format);
@@ -102,12 +121,19 @@ public:
     static QList<QSslCertificate> certificatesFromDer(const QByteArray &der, int count = -1);
     static bool isBlacklisted(const QSslCertificate &certificate);
     static QSslCertificateExtension convertExtension(X509_EXTENSION *ext);
+    static QByteArray subjectInfoToString(QSslCertificate::SubjectInfo info);
 
     friend class QSslSocketBackendPrivate;
 
     QAtomicInt ref;
+
+#ifdef Q_OS_WINRT
+    Microsoft::WRL::ComPtr<ABI::Windows::Security::Cryptography::Certificates::ICertificate> certificate;
+
+    static QSslCertificate QSslCertificate_from_Certificate(ABI::Windows::Security::Cryptography::Certificates::ICertificate *iCertificate);
+#endif
 };
 
 QT_END_NAMESPACE
 
-#endif
+#endif // QSSLCERTIFICATE_OPENSSL_P_H
diff --git a/src/network/ssl/qsslcertificate_qt.cpp b/src/network/ssl/qsslcertificate_qt.cpp
new file mode 100644
index 0000000000..8019416aba
--- /dev/null
+++ b/src/network/ssl/qsslcertificate_qt.cpp
@@ -0,0 +1,518 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+
+#include "qsslcertificate.h"
+#include "qsslcertificate_p.h"
+#include "qsslkey.h"
+#include "qsslkey_p.h"
+#include "qsslcertificateextension.h"
+#include "qsslcertificateextension_p.h"
+#include "qasn1element_p.h"
+
+QT_BEGIN_NAMESPACE
+
+enum GeneralNameType
+{
+    Rfc822NameType = 0x81,
+    DnsNameType = 0x82,
+    UniformResourceIdentifierType = 0x86
+};
+
+bool QSslCertificate::operator==(const QSslCertificate &other) const
+{
+    if (d == other.d)
+        return true;
+    if (d->null && other.d->null)
+        return true;
+    return d->derData == other.d->derData;
+}
+
+bool QSslCertificate::isNull() const
+{
+    return d->null;
+}
+
+bool QSslCertificate::isSelfSigned() const
+{
+    if (d->null)
+        return false;
+
+    qWarning("QSslCertificate::isSelfSigned: This function does not check, whether the certificate "
+             "is actually signed. It just checks whether issuer and subject are identical");
+    return d->subjectMatchesIssuer;
+}
+
+QByteArray QSslCertificate::version() const
+{
+    return d->versionString;
+}
+
+QByteArray QSslCertificate::serialNumber() const
+{
+    return d->serialNumberString;
+}
+
+QStringList QSslCertificate::issuerInfo(SubjectInfo info) const
+{
+    return issuerInfo(QSslCertificatePrivate::subjectInfoToString(info));
+}
+
+QStringList QSslCertificate::issuerInfo(const QByteArray &attribute) const
+{
+    return d->issuerInfo.values(attribute);
+}
+
+QStringList QSslCertificate::subjectInfo(SubjectInfo info) const
+{
+    return subjectInfo(QSslCertificatePrivate::subjectInfoToString(info));
+}
+
+QStringList QSslCertificate::subjectInfo(const QByteArray &attribute) const
+{
+    return d->subjectInfo.values(attribute);
+}
+
+QList<QByteArray> QSslCertificate::subjectInfoAttributes() const
+{
+    return d->subjectInfo.uniqueKeys();
+}
+
+QList<QByteArray> QSslCertificate::issuerInfoAttributes() const
+{
+    return d->issuerInfo.uniqueKeys();
+}
+
+QMultiMap<QSsl::AlternativeNameEntryType, QString> QSslCertificate::subjectAlternativeNames() const
+{
+    return d->subjectAlternativeNames;
+}
+
+QDateTime QSslCertificate::effectiveDate() const
+{
+    return d->notValidBefore;
+}
+
+QDateTime QSslCertificate::expiryDate() const
+{
+    return d->notValidAfter;
+}
+
+#ifndef Q_OS_WINRT // implemented in qsslcertificate_winrt.cpp
+Qt::HANDLE QSslCertificate::handle() const
+{
+    Q_UNIMPLEMENTED();
+    return 0;
+}
+#endif
+
+QSslKey QSslCertificate::publicKey() const
+{
+    QSslKey key;
+    key.d->type = QSsl::PublicKey;
+    if (d->publicKeyAlgorithm != QSsl::Opaque) {
+    key.d->algorithm = d->publicKeyAlgorithm;
+    key.d->decodeDer(d->publicKeyDerData);
+    }
+    return key;
+}
+
+QList<QSslCertificateExtension> QSslCertificate::extensions() const
+{
+    return d->extensions;
+}
+
+#define BEGINCERTSTRING "-----BEGIN CERTIFICATE-----"
+#define ENDCERTSTRING "-----END CERTIFICATE-----"
+
+QByteArray QSslCertificate::toPem() const
+{
+    QByteArray array = toDer();
+
+    // Convert to Base64 - wrap at 64 characters.
+    array = array.toBase64();
+    QByteArray tmp;
+    for (int i = 0; i <= array.size() - 64; i += 64) {
+        tmp += QByteArray::fromRawData(array.data() + i, 64);
+        tmp += '\n';
+    }
+    if (int remainder = array.size() % 64) {
+        tmp += QByteArray::fromRawData(array.data() + array.size() - remainder, remainder);
+        tmp += '\n';
+    }
+
+    return BEGINCERTSTRING "\n" + tmp + ENDCERTSTRING "\n";
+}
+
+QByteArray QSslCertificate::toDer() const
+{
+    return d->derData;
+}
+
+QString QSslCertificate::toText() const
+{
+    Q_UNIMPLEMENTED();
+    return QString();
+}
+
+void QSslCertificatePrivate::init(const QByteArray &data, QSsl::EncodingFormat format)
+{
+    if (!data.isEmpty()) {
+        QList<QSslCertificate> certs = (format == QSsl::Pem)
+            ? certificatesFromPem(data, 1)
+            : certificatesFromDer(data, 1);
+        if (!certs.isEmpty()) {
+            *this = *certs.first().d;
+        }
+    }
+}
+
+static bool matchLineFeed(const QByteArray &pem, int *offset)
+{
+    char ch = 0;
+
+    // ignore extra whitespace at the end of the line
+    while (*offset < pem.size() && (ch = pem.at(*offset)) == ' ')
+        ++*offset;
+
+    if (ch == '\n') {
+        *offset += 1;
+        return true;
+    }
+    if (ch == '\r' && pem.size() > (*offset + 1) && pem.at(*offset + 1) == '\n') {
+        *offset += 2;
+        return true;
+    }
+    return false;
+}
+
+QList<QSslCertificate> QSslCertificatePrivate::certificatesFromPem(const QByteArray &pem, int count)
+{
+    QList<QSslCertificate> certificates;
+    int offset = 0;
+    while (count == -1 || certificates.size() < count) {
+        int startPos = pem.indexOf(BEGINCERTSTRING, offset);
+        if (startPos == -1)
+            break;
+        startPos += sizeof(BEGINCERTSTRING) - 1;
+        if (!matchLineFeed(pem, &startPos))
+            break;
+
+        int endPos = pem.indexOf(ENDCERTSTRING, startPos);
+        if (endPos == -1)
+            break;
+
+        offset = endPos + sizeof(ENDCERTSTRING) - 1;
+        if (offset < pem.size() && !matchLineFeed(pem, &offset))
+            break;
+
+        QByteArray decoded = QByteArray::fromBase64(
+            QByteArray::fromRawData(pem.data() + startPos, endPos - startPos));
+        certificates << certificatesFromDer(decoded, 1);;
+    }
+
+    return certificates;
+}
+
+QList<QSslCertificate> QSslCertificatePrivate::certificatesFromDer(const QByteArray &der, int count)
+{
+    QList<QSslCertificate> certificates;
+
+    QByteArray data = der;
+    while (count == -1 || certificates.size() < count) {
+        QSslCertificate cert;
+        if (!cert.d->parse(data))
+            break;
+
+        certificates << cert;
+        data.remove(0, cert.d->derData.size());
+    }
+
+    return certificates;
+}
+
+static QByteArray colonSeparatedHex(const QByteArray &value)
+{
+    QByteArray hexString;
+    hexString.reserve(value.size() * 3);
+    for (int a = 0; a < value.size(); ++a) {
+        const quint8 b = value.at(a);
+        if (b || !hexString.isEmpty()) { // skip leading zeros
+            hexString += QByteArray::number(b, 16).rightJustified(2, '0');
+            hexString += ':';
+        }
+    }
+    hexString.chop(1);
+    return hexString;
+}
+
+bool QSslCertificatePrivate::parse(const QByteArray &data)
+{
+    QAsn1Element root;
+
+    QDataStream dataStream(data);
+    if (!root.read(dataStream) || root.type() != QAsn1Element::SequenceType)
+        return false;
+
+    QDataStream rootStream(root.value());
+    QAsn1Element cert;
+    if (!cert.read(rootStream) || cert.type() != QAsn1Element::SequenceType)
+        return false;
+
+    // version or serial number
+    QAsn1Element elem;
+    QDataStream certStream(cert.value());
+    if (!elem.read(certStream))
+        return false;
+
+    if (elem.type() == QAsn1Element::Context0Type) {
+        QDataStream versionStream(elem.value());
+        if (!elem.read(versionStream) || elem.type() != QAsn1Element::IntegerType)
+            return false;
+
+        versionString = QByteArray::number(elem.value()[0] + 1);
+        if (!elem.read(certStream))
+            return false;
+    } else {
+        versionString = QByteArray::number(1);
+    }
+
+    // serial number
+    if (elem.type() != QAsn1Element::IntegerType)
+        return false;
+    serialNumberString = colonSeparatedHex(elem.value());
+
+    // algorithm ID
+    if (!elem.read(certStream) || elem.type() != QAsn1Element::SequenceType)
+        return false;
+
+    // issuer info
+    if (!elem.read(certStream) || elem.type() != QAsn1Element::SequenceType)
+        return false;
+
+    QByteArray issuerDer = data.mid(dataStream.device()->pos() - elem.value().length(), elem.value().length());
+    issuerInfo = elem.toInfo();
+
+    // validity period
+    if (!elem.read(certStream) || elem.type() != QAsn1Element::SequenceType)
+        return false;
+
+    QDataStream validityStream(elem.value());
+    if (!elem.read(validityStream) || (elem.type() != QAsn1Element::UtcTimeType && elem.type() != QAsn1Element::GeneralizedTimeType))
+        return false;
+
+    notValidBefore = elem.toDateTime();
+    if (!elem.read(validityStream) || (elem.type() != QAsn1Element::UtcTimeType && elem.type() != QAsn1Element::GeneralizedTimeType))
+        return false;
+
+    notValidAfter = elem.toDateTime();
+
+    // subject name
+    if (!elem.read(certStream) || elem.type() != QAsn1Element::SequenceType)
+        return false;
+
+    QByteArray subjectDer = data.mid(dataStream.device()->pos() - elem.value().length(), elem.value().length());
+    subjectInfo = elem.toInfo();
+    subjectMatchesIssuer = issuerDer == subjectDer;
+
+    // public key
+    qint64 keyStart = certStream.device()->pos();
+    if (!elem.read(certStream) || elem.type() != QAsn1Element::SequenceType)
+        return false;
+
+    publicKeyDerData.resize(certStream.device()->pos() - keyStart);
+    QDataStream keyStream(elem.value());
+    if (!elem.read(keyStream) || elem.type() != QAsn1Element::SequenceType)
+        return false;
+
+
+    // key algorithm
+    if (!elem.read(elem.value()) || elem.type() != QAsn1Element::ObjectIdentifierType)
+        return false;
+
+    const QByteArray oid = elem.toObjectId();
+    if (oid == RSA_ENCRYPTION_OID)
+        publicKeyAlgorithm = QSsl::Rsa;
+    else if (oid == RSA_ENCRYPTION_OID)
+        publicKeyAlgorithm = QSsl::Dsa;
+    else
+        publicKeyAlgorithm = QSsl::Opaque;
+
+    certStream.device()->seek(keyStart);
+    certStream.readRawData(publicKeyDerData.data(), publicKeyDerData.size());
+
+    // extensions
+    while (elem.read(certStream)) {
+        if (elem.type() == QAsn1Element::Context3Type) {
+            if (elem.read(elem.value()) && elem.type() == QAsn1Element::SequenceType) {
+                QDataStream extStream(elem.value());
+                while (elem.read(extStream) && elem.type() == QAsn1Element::SequenceType) {
+                    QSslCertificateExtension extension;
+                    if (!parseExtension(elem.value(), &extension))
+                        return false;
+                    extensions << extension;
+
+                    if (extension.oid() == QLatin1String("2.5.29.17")) {
+                        // subjectAltName
+                        QAsn1Element sanElem;
+                        if (sanElem.read(extension.value().toByteArray()) && sanElem.type() == QAsn1Element::SequenceType) {
+                            QDataStream nameStream(sanElem.value());
+                            QAsn1Element nameElem;
+                            while (nameElem.read(nameStream)) {
+                                if (nameElem.type() == Rfc822NameType) {
+                                    subjectAlternativeNames.insert(QSsl::EmailEntry, QString::fromLatin1(nameElem.value(), nameElem.value().size()));
+                                } else if (nameElem.type() == DnsNameType) {
+                                    subjectAlternativeNames.insert(QSsl::DnsEntry, QString::fromLatin1(nameElem.value(), nameElem.value().size()));
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    derData = data.left(dataStream.device()->pos());
+    null = false;
+    return true;
+}
+
+bool QSslCertificatePrivate::parseExtension(const QByteArray &data, QSslCertificateExtension *extension)
+{
+    bool ok;
+    bool critical = false;
+    QAsn1Element oidElem, valElem;
+
+    QDataStream seqStream(data);
+
+    // oid
+    if (!oidElem.read(seqStream) || oidElem.type() != QAsn1Element::ObjectIdentifierType)
+        return false;
+    const QByteArray oid = oidElem.toObjectId();
+
+    // critical and value
+    if (!valElem.read(seqStream))
+        return false;
+    if (valElem.type() == QAsn1Element::BooleanType) {
+        critical = valElem.toBool(&ok);
+        if (!ok || !valElem.read(seqStream))
+            return false;
+    }
+    if (valElem.type() != QAsn1Element::OctetStringType)
+        return false;
+
+    // interpret value
+    QAsn1Element val;
+    bool supported = true;
+    QVariant value;
+    if (oid == QByteArrayLiteral("1.3.6.1.5.5.7.1.1")) {
+        // authorityInfoAccess
+        if (!val.read(valElem.value()) || val.type() != QAsn1Element::SequenceType)
+            return false;
+        QVariantMap result;
+        foreach (const QAsn1Element &el, val.toVector()) {
+            QVector<QAsn1Element> items = el.toVector();
+            if (items.size() != 2)
+                return false;
+            const QString key = QString::fromLatin1(items.at(0).toObjectName());
+            switch (items.at(1).type()) {
+            case Rfc822NameType:
+            case DnsNameType:
+            case UniformResourceIdentifierType:
+                result[key] = QString::fromLatin1(items.at(1).value(), items.at(1).value().size());
+                break;
+            }
+        }
+        value = result;
+    } else if (oid == QByteArrayLiteral("2.5.29.14")) {
+        // subjectKeyIdentifier
+        if (!val.read(valElem.value()) || val.type() != QAsn1Element::OctetStringType)
+            return false;
+        value = colonSeparatedHex(val.value()).toUpper();
+    } else if (oid == QByteArrayLiteral("2.5.29.19")) {
+        // basicConstraints
+        if (!val.read(valElem.value()) || val.type() != QAsn1Element::SequenceType)
+            return false;
+
+        QVariantMap result;
+        QVector<QAsn1Element> items = val.toVector();
+        if (items.size() > 0) {
+            result[QStringLiteral("ca")] = items.at(0).toBool(&ok);
+            if (!ok)
+                return false;
+        } else {
+            result[QStringLiteral("ca")] = false;
+        }
+        if (items.size() > 1) {
+            result[QStringLiteral("pathLenConstraint")] = items.at(1).toInteger(&ok);
+            if (!ok)
+                return false;
+        }
+        value = result;
+    } else if (oid == QByteArrayLiteral("2.5.29.35")) {
+        // authorityKeyIdentifier
+        if (!val.read(valElem.value()) || val.type() != QAsn1Element::SequenceType)
+            return false;
+        QVariantMap result;
+        foreach (const QAsn1Element &el, val.toVector()) {
+            if (el.type() == 0x80) {
+                result[QStringLiteral("keyid")] = el.value().toHex();
+            } else if (el.type() == 0x82) {
+                result[QStringLiteral("serial")] = colonSeparatedHex(el.value());
+            }
+        }
+        value = result;
+    } else {
+        supported = false;
+        value = valElem.value();
+    }
+
+    extension->d->critical = critical;
+    extension->d->supported = supported;
+    extension->d->oid = QString::fromLatin1(oid);
+    extension->d->name = QString::fromLatin1(oidElem.toObjectName());
+    extension->d->value = value;
+
+    return true;
+}
+
+QT_END_NAMESPACE
diff --git a/src/network/ssl/qsslcertificate_winrt.cpp b/src/network/ssl/qsslcertificate_winrt.cpp
new file mode 100644
index 0000000000..6f4bb80cf9
--- /dev/null
+++ b/src/network/ssl/qsslcertificate_winrt.cpp
@@ -0,0 +1,114 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qsslcertificate_p.h"
+
+#include <QtCore/qfunctions_winrt.h>
+
+#include <wrl.h>
+#include <windows.storage.streams.h>
+#include <windows.security.cryptography.h>
+#include <robuffer.h>
+
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Security::Cryptography;
+using namespace ABI::Windows::Security::Cryptography::Certificates;
+using namespace ABI::Windows::Storage::Streams;
+
+QT_USE_NAMESPACE
+
+struct SslCertificateGlobal
+{
+    SslCertificateGlobal() {
+        HRESULT hr;
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Security_Cryptography_Certificates_Certificate).Get(),
+                                  &certificateFactory);
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Security_Cryptography_CryptographicBuffer).Get(),
+                                  &bufferFactory);
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+
+    ComPtr<ICertificateFactory> certificateFactory;
+    ComPtr<ICryptographicBufferStatics> bufferFactory;
+};
+Q_GLOBAL_STATIC(SslCertificateGlobal, g)
+
+QSslCertificate QSslCertificatePrivate::QSslCertificate_from_Certificate(ICertificate *iCertificate)
+{
+    Q_ASSERT(iCertificate);
+    ComPtr<IBuffer> buffer;
+    HRESULT hr = iCertificate->GetCertificateBlob(&buffer);
+    RETURN_IF_FAILED("Could not obtain certification blob", return QSslCertificate());
+    ComPtr<Windows::Storage::Streams::IBufferByteAccess> byteAccess;
+    hr = buffer.As(&byteAccess);
+    RETURN_IF_FAILED("Could not obtain byte access to buffer", return QSslCertificate());
+    char *data;
+    hr = byteAccess->Buffer(reinterpret_cast<byte **>(&data));
+    RETURN_IF_FAILED("Could not obtain buffer data", return QSslCertificate());
+    UINT32 size;
+    hr = buffer->get_Length(&size);
+    RETURN_IF_FAILED("Could not obtain buffer length ", return QSslCertificate());
+    QByteArray der(data, size);
+
+    QSslCertificate certificate;
+    certificate.d->null = false;
+    certificate.d->certificate = iCertificate;
+
+    return certificatesFromDer(der, 1).at(0);
+}
+
+Qt::HANDLE QSslCertificate::handle() const
+{
+    if (!d->certificate) {
+        HRESULT hr;
+        ComPtr<IBuffer> buffer;
+        hr = g->bufferFactory->CreateFromByteArray(d->derData.length(), (BYTE *)d->derData.data(), &buffer);
+        RETURN_IF_FAILED("Failed to create the certificate data buffer", return 0);
+
+        hr = g->certificateFactory->CreateCertificate(buffer.Get(), &d->certificate);
+        RETURN_IF_FAILED("Failed to create the certificate handle from the data buffer", return 0);
+    }
+
+    return d->certificate.Get();
+}
diff --git a/src/network/ssl/qsslcertificateextension.cpp b/src/network/ssl/qsslcertificateextension.cpp
index c059d12221..d20e92e0b9 100644
--- a/src/network/ssl/qsslcertificateextension.cpp
+++ b/src/network/ssl/qsslcertificateextension.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslcertificateextension.h b/src/network/ssl/qsslcertificateextension.h
index 080b1ccc4e..95bfd1d5c3 100644
--- a/src/network/ssl/qsslcertificateextension.h
+++ b/src/network/ssl/qsslcertificateextension.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslcertificateextension_p.h b/src/network/ssl/qsslcertificateextension_p.h
index 6891733174..b3e65f2961 100644
--- a/src/network/ssl/qsslcertificateextension_p.h
+++ b/src/network/ssl/qsslcertificateextension_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslcipher.cpp b/src/network/ssl/qsslcipher.cpp
index bb5d93e528..9f3dbd9e2b 100644
--- a/src/network/ssl/qsslcipher.cpp
+++ b/src/network/ssl/qsslcipher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslcipher.h b/src/network/ssl/qsslcipher.h
index f6ca033ede..0135153eed 100644
--- a/src/network/ssl/qsslcipher.h
+++ b/src/network/ssl/qsslcipher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslcipher_p.h b/src/network/ssl/qsslcipher_p.h
index 3ee78ab68f..337af7814d 100644
--- a/src/network/ssl/qsslcipher_p.h
+++ b/src/network/ssl/qsslcipher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslconfiguration.cpp b/src/network/ssl/qsslconfiguration.cpp
index 14881931af..2aa59e5d18 100644
--- a/src/network/ssl/qsslconfiguration.cpp
+++ b/src/network/ssl/qsslconfiguration.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -208,6 +200,7 @@ bool QSslConfiguration::operator==(const QSslConfiguration &other) const
         d->localCertificateChain == other.d->localCertificateChain &&
         d->privateKey == other.d->privateKey &&
         d->sessionCipher == other.d->sessionCipher &&
+        d->sessionProtocol == other.d->sessionProtocol &&
         d->ciphers == other.d->ciphers &&
         d->caCertificates == other.d->caCertificates &&
         d->protocol == other.d->protocol &&
@@ -512,6 +505,18 @@ QSslCipher QSslConfiguration::sessionCipher() const
 }
 
 /*!
+    Returns the socket's SSL/TLS protocol or UnknownProtocol if the
+    connection isn't encrypted. The socket's protocol for the session
+    is set during the handshake phase.
+
+    \sa protocol(), setProtocol()
+*/
+QSsl::SslProtocol QSslConfiguration::sessionProtocol() const
+{
+    return d->sessionProtocol;
+}
+
+/*!
     Returns the \l {QSslKey} {SSL key} assigned to this connection or
     a null key if none has been assigned yet.
 
diff --git a/src/network/ssl/qsslconfiguration.h b/src/network/ssl/qsslconfiguration.h
index 587187ca06..0c4e122912 100644
--- a/src/network/ssl/qsslconfiguration.h
+++ b/src/network/ssl/qsslconfiguration.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -109,6 +101,7 @@ public:
     QSslCertificate peerCertificate() const;
     QList<QSslCertificate> peerCertificateChain() const;
     QSslCipher sessionCipher() const;
+    QSsl::SslProtocol sessionProtocol() const;
 
     // Private keys, for server sockets
     QSslKey privateKey() const;
diff --git a/src/network/ssl/qsslconfiguration_p.h b/src/network/ssl/qsslconfiguration_p.h
index d183c3335c..6880f59c4b 100644
--- a/src/network/ssl/qsslconfiguration_p.h
+++ b/src/network/ssl/qsslconfiguration_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,7 +73,8 @@ class QSslConfigurationPrivate: public QSharedData
 {
 public:
     QSslConfigurationPrivate()
-        : protocol(QSsl::SecureProtocols),
+        : sessionProtocol(QSsl::UnknownProtocol),
+          protocol(QSsl::SecureProtocols),
           peerVerifyMode(QSslSocket::AutoVerifyPeer),
           peerVerifyDepth(0),
           allowRootCertOnDemandLoading(true),
@@ -98,6 +91,7 @@ public:
 
     QSslKey privateKey;
     QSslCipher sessionCipher;
+    QSsl::SslProtocol sessionProtocol;
     QList<QSslCipher> ciphers;
     QList<QSslCertificate> caCertificates;
 
diff --git a/src/network/ssl/qsslcontext.cpp b/src/network/ssl/qsslcontext_openssl.cpp
index addf7a2ff5..1f787b0da3 100644
--- a/src/network/ssl/qsslcontext.cpp
+++ b/src/network/ssl/qsslcontext_openssl.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,7 +36,7 @@
 #include <QtNetwork/qsslsocket.h>
 #include <QtCore/qmutex.h>
 
-#include "private/qsslcontext_p.h"
+#include "private/qsslcontext_openssl_p.h"
 #include "private/qsslsocket_p.h"
 #include "private/qsslsocket_openssl_p.h"
 #include "private/qsslsocket_openssl_symbols_p.h"
diff --git a/src/network/ssl/qsslcontext_p.h b/src/network/ssl/qsslcontext_openssl_p.h
index 408376b954..41fe77dcdb 100644
--- a/src/network/ssl/qsslcontext_p.h
+++ b/src/network/ssl/qsslcontext_openssl_p.h
@@ -1,48 +1,40 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 
-#ifndef QSSLCONTEXT_H
-#define QSSLCONTEXT_H
+#ifndef QSSLCONTEXT_OPENSSL_P_H
+#define QSSLCONTEXT_OPENSSL_P_H
 
 //
 //  W A R N I N G
@@ -121,4 +113,4 @@ private:
 
 QT_END_NAMESPACE
 
-#endif // QSSLCONTEXT_H
+#endif // QSSLCONTEXT_OPENSSL_P_H
diff --git a/src/network/ssl/qsslerror.cpp b/src/network/ssl/qsslerror.cpp
index 07ce66bcbc..ff30098347 100644
--- a/src/network/ssl/qsslerror.cpp
+++ b/src/network/ssl/qsslerror.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslerror.h b/src/network/ssl/qsslerror.h
index 73549ce648..d25546b68b 100644
--- a/src/network/ssl/qsslerror.h
+++ b/src/network/ssl/qsslerror.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslkey.h b/src/network/ssl/qsslkey.h
index 145d4a28f1..3c69a002d4 100644
--- a/src/network/ssl/qsslkey.h
+++ b/src/network/ssl/qsslkey.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -95,6 +87,7 @@ public:
 private:
     QExplicitlySharedDataPointer<QSslKeyPrivate> d;
     friend class QSslCertificate;
+    friend class QSslSocketBackendPrivate;
 };
 
 Q_DECLARE_SHARED(QSslKey)
diff --git a/src/network/ssl/qsslkey_openssl.cpp b/src/network/ssl/qsslkey_openssl.cpp
new file mode 100644
index 0000000000..6b0fa954eb
--- /dev/null
+++ b/src/network/ssl/qsslkey_openssl.cpp
@@ -0,0 +1,224 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+#include "qsslkey.h"
+#include "qsslkey_p.h"
+#include "qsslsocket_openssl_symbols_p.h"
+#include "qsslsocket.h"
+#include "qsslsocket_p.h"
+
+#include <QtCore/qatomic.h>
+#include <QtCore/qbytearray.h>
+#include <QtCore/qiodevice.h>
+#ifndef QT_NO_DEBUG_STREAM
+#include <QtCore/qdebug.h>
+#endif
+
+QT_BEGIN_NAMESPACE
+
+void QSslKeyPrivate::clear(bool deep)
+{
+    isNull = true;
+    if (!QSslSocket::supportsSsl())
+        return;
+    if (rsa) {
+        if (deep)
+            q_RSA_free(rsa);
+        rsa = 0;
+    }
+    if (dsa) {
+        if (deep)
+            q_DSA_free(dsa);
+        dsa = 0;
+    }
+    if (opaque) {
+        if (deep)
+            q_EVP_PKEY_free(opaque);
+        opaque = 0;
+    }
+}
+
+bool QSslKeyPrivate::fromEVP_PKEY(EVP_PKEY *pkey)
+{
+    if (pkey->type == EVP_PKEY_RSA) {
+        isNull = false;
+        algorithm = QSsl::Rsa;
+        type = QSsl::PrivateKey;
+
+        rsa = q_RSA_new();
+        memcpy(rsa, q_EVP_PKEY_get1_RSA(pkey), sizeof(RSA));
+
+        return true;
+    }
+    else if (pkey->type == EVP_PKEY_DSA) {
+        isNull = false;
+        algorithm = QSsl::Dsa;
+        type = QSsl::PrivateKey;
+
+        dsa = q_DSA_new();
+        memcpy(rsa, q_EVP_PKEY_get1_DSA(pkey), sizeof(DSA));
+
+        return true;
+    }
+    else {
+        // Unknown key type. This could be handled as opaque, but then
+        // we'd eventually leak memory since we wouldn't be able to free
+        // the underlying EVP_PKEY structure. For now, we won't support
+        // this.
+    }
+
+    return false;
+}
+
+void QSslKeyPrivate::decodeDer(const QByteArray &der, bool deepClear)
+{
+    QMap<QByteArray, QByteArray> headers;
+    decodePem(pemFromDer(der, headers), QByteArray(), deepClear);
+}
+
+void QSslKeyPrivate::decodePem(const QByteArray &pem, const QByteArray &passPhrase,
+                               bool deepClear)
+{
+    if (pem.isEmpty())
+        return;
+
+    clear(deepClear);
+
+    if (!QSslSocket::supportsSsl())
+        return;
+
+    BIO *bio = q_BIO_new_mem_buf(const_cast<char *>(pem.data()), pem.size());
+    if (!bio)
+        return;
+
+    void *phrase = (void *)passPhrase.constData();
+
+    if (algorithm == QSsl::Rsa) {
+        RSA *result = (type == QSsl::PublicKey)
+            ? q_PEM_read_bio_RSA_PUBKEY(bio, &rsa, 0, phrase)
+            : q_PEM_read_bio_RSAPrivateKey(bio, &rsa, 0, phrase);
+        if (rsa && rsa == result)
+            isNull = false;
+    } else {
+        DSA *result = (type == QSsl::PublicKey)
+            ? q_PEM_read_bio_DSA_PUBKEY(bio, &dsa, 0, phrase)
+            : q_PEM_read_bio_DSAPrivateKey(bio, &dsa, 0, phrase);
+        if (dsa && dsa == result)
+            isNull = false;
+    }
+
+    q_BIO_free(bio);
+}
+
+int QSslKeyPrivate::length() const
+{
+    if (isNull || algorithm == QSsl::Opaque)
+        return -1;
+
+    return (algorithm == QSsl::Rsa)
+           ? q_BN_num_bits(rsa->n) : q_BN_num_bits(dsa->p);
+}
+
+QByteArray QSslKeyPrivate::toPem(const QByteArray &passPhrase) const
+{
+    if (!QSslSocket::supportsSsl() || isNull || algorithm == QSsl::Opaque)
+        return QByteArray();
+
+    BIO *bio = q_BIO_new(q_BIO_s_mem());
+    if (!bio)
+        return QByteArray();
+
+    bool fail = false;
+
+    if (algorithm == QSsl::Rsa) {
+        if (type == QSsl::PublicKey) {
+            if (!q_PEM_write_bio_RSA_PUBKEY(bio, rsa))
+                fail = true;
+        } else {
+            if (!q_PEM_write_bio_RSAPrivateKey(
+                    bio, rsa,
+                    // ### the cipher should be selectable in the API:
+                    passPhrase.isEmpty() ? (const EVP_CIPHER *)0 : q_EVP_des_ede3_cbc(),
+                    (uchar *)passPhrase.data(), passPhrase.size(), 0, 0)) {
+                fail = true;
+            }
+        }
+    } else {
+        if (type == QSsl::PublicKey) {
+            if (!q_PEM_write_bio_DSA_PUBKEY(bio, dsa))
+                fail = true;
+        } else {
+            if (!q_PEM_write_bio_DSAPrivateKey(
+                    bio, dsa,
+                    // ### the cipher should be selectable in the API:
+                    passPhrase.isEmpty() ? (const EVP_CIPHER *)0 : q_EVP_des_ede3_cbc(),
+                    (uchar *)passPhrase.data(), passPhrase.size(), 0, 0)) {
+                fail = true;
+            }
+        }
+    }
+
+    QByteArray pem;
+    if (!fail) {
+        char *data;
+        long size = q_BIO_get_mem_data(bio, &data);
+        pem = QByteArray(data, size);
+    }
+    q_BIO_free(bio);
+    return pem;
+}
+
+Qt::HANDLE QSslKeyPrivate::handle() const
+{
+    switch (algorithm) {
+    case QSsl::Opaque:
+        return Qt::HANDLE(opaque);
+    case QSsl::Rsa:
+        return Qt::HANDLE(rsa);
+    case QSsl::Dsa:
+        return Qt::HANDLE(dsa);
+    default:
+        return Qt::HANDLE(NULL);
+    }
+}
+
+QT_END_NAMESPACE
diff --git a/src/network/ssl/qsslkey.cpp b/src/network/ssl/qsslkey_p.cpp
index 95eed6e4b3..6162034fd7 100644
--- a/src/network/ssl/qsslkey.cpp
+++ b/src/network/ssl/qsslkey_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,12 +50,12 @@
 
 #include "qsslkey.h"
 #include "qsslkey_p.h"
-#include "qsslsocket_openssl_symbols_p.h"
 #include "qsslsocket.h"
 #include "qsslsocket_p.h"
 
 #include <QtCore/qatomic.h>
 #include <QtCore/qbytearray.h>
+#include <QtCore/qbytearraymatcher.h>
 #include <QtCore/qiodevice.h>
 #ifndef QT_NO_DEBUG_STREAM
 #include <QtCore/qdebug.h>
@@ -72,31 +64,13 @@
 QT_BEGIN_NAMESPACE
 
 /*!
+    \fn void QSslKeyPrivate::clear(bool deep)
     \internal
  */
-void QSslKeyPrivate::clear(bool deep)
-{
-    isNull = true;
-    if (!QSslSocket::supportsSsl())
-        return;
-    if (rsa) {
-        if (deep)
-            q_RSA_free(rsa);
-        rsa = 0;
-    }
-    if (dsa) {
-        if (deep)
-            q_DSA_free(dsa);
-        dsa = 0;
-    }
-    if (opaque) {
-        if (deep)
-            q_EVP_PKEY_free(opaque);
-        opaque = 0;
-    }
-}
 
 /*!
+    \fn void QSslKeyPrivate::decodePem(const QByteArray &pem, const QByteArray &passPhrase,
+                               bool deepClear)
     \internal
 
     Allocates a new rsa or dsa struct and decodes \a pem into it
@@ -109,39 +83,6 @@ void QSslKeyPrivate::clear(bool deep)
     If \a passPhrase is non-empty, it will be used for decrypting
     \a pem.
 */
-void QSslKeyPrivate::decodePem(const QByteArray &pem, const QByteArray &passPhrase,
-                               bool deepClear)
-{
-    if (pem.isEmpty())
-        return;
-
-    clear(deepClear);
-
-    if (!QSslSocket::supportsSsl())
-        return;
-
-    BIO *bio = q_BIO_new_mem_buf(const_cast<char *>(pem.data()), pem.size());
-    if (!bio)
-        return;
-
-    void *phrase = (void *)passPhrase.constData();
-
-    if (algorithm == QSsl::Rsa) {
-        RSA *result = (type == QSsl::PublicKey)
-            ? q_PEM_read_bio_RSA_PUBKEY(bio, &rsa, 0, phrase)
-            : q_PEM_read_bio_RSAPrivateKey(bio, &rsa, 0, phrase);
-        if (rsa && rsa == result)
-            isNull = false;
-    } else {
-        DSA *result = (type == QSsl::PublicKey)
-            ? q_PEM_read_bio_DSA_PUBKEY(bio, &dsa, 0, phrase)
-            : q_PEM_read_bio_DSAPrivateKey(bio, &dsa, 0, phrase);
-        if (dsa && dsa == result)
-            isNull = false;
-    }
-
-    q_BIO_free(bio);
-}
 
 /*!
     Constructs a null key.
@@ -158,12 +99,11 @@ QSslKey::QSslKey()
 */
 QByteArray QSslKeyPrivate::pemHeader() const
 {
-    // ### use QByteArray::fromRawData() instead
     if (type == QSsl::PublicKey)
-        return QByteArray("-----BEGIN PUBLIC KEY-----\n");
+        return QByteArrayLiteral("-----BEGIN PUBLIC KEY-----");
     else if (algorithm == QSsl::Rsa)
-        return QByteArray("-----BEGIN RSA PRIVATE KEY-----\n");
-    return QByteArray("-----BEGIN DSA PRIVATE KEY-----\n");
+        return QByteArrayLiteral("-----BEGIN RSA PRIVATE KEY-----");
+    return QByteArrayLiteral("-----BEGIN DSA PRIVATE KEY-----");
 }
 
 /*!
@@ -171,12 +111,11 @@ QByteArray QSslKeyPrivate::pemHeader() const
 */
 QByteArray QSslKeyPrivate::pemFooter() const
 {
-    // ### use QByteArray::fromRawData() instead
     if (type == QSsl::PublicKey)
-        return QByteArray("-----END PUBLIC KEY-----\n");
+        return QByteArrayLiteral("-----END PUBLIC KEY-----");
     else if (algorithm == QSsl::Rsa)
-        return QByteArray("-----END RSA PRIVATE KEY-----\n");
-    return QByteArray("-----END DSA PRIVATE KEY-----\n");
+        return QByteArrayLiteral("-----END RSA PRIVATE KEY-----");
+    return QByteArrayLiteral("-----END DSA PRIVATE KEY-----");
 }
 
 /*!
@@ -184,7 +123,7 @@ QByteArray QSslKeyPrivate::pemFooter() const
 
     Returns a DER key formatted as PEM.
 */
-QByteArray QSslKeyPrivate::pemFromDer(const QByteArray &der) const
+QByteArray QSslKeyPrivate::pemFromDer(const QByteArray &der, const QMap<QByteArray, QByteArray> &headers) const
 {
     QByteArray pem(der.toBase64());
 
@@ -198,8 +137,17 @@ QByteArray QSslKeyPrivate::pemFromDer(const QByteArray &der) const
     if (rem)
         pem.append('\n'); // ###
 
-    pem.prepend(pemHeader());
-    pem.append(pemFooter());
+    QByteArray extra;
+    if (!headers.isEmpty()) {
+        QMap<QByteArray, QByteArray>::const_iterator it = headers.constEnd();
+        do {
+            it--;
+                extra += it.key() + ": " + it.value() + '\n';
+        } while (it != headers.constBegin());
+        extra += '\n';
+    }
+    pem.prepend(pemHeader() + '\n' + extra);
+    pem.append(pemFooter() + '\n');
 
     return pem;
 }
@@ -209,7 +157,7 @@ QByteArray QSslKeyPrivate::pemFromDer(const QByteArray &der) const
 
     Returns a PEM key formatted as DER.
 */
-QByteArray QSslKeyPrivate::derFromPem(const QByteArray &pem) const
+QByteArray QSslKeyPrivate::derFromPem(const QByteArray &pem, QMap<QByteArray, QByteArray> *headers) const
 {
     const QByteArray header = pemHeader();
     const QByteArray footer = pemFooter();
@@ -223,14 +171,49 @@ QByteArray QSslKeyPrivate::derFromPem(const QByteArray &pem) const
 
     der = der.mid(headerIndex + header.size(), footerIndex - (headerIndex + header.size()));
 
+    if (der.contains("Proc-Type:")) {
+        // taken from QHttpNetworkReplyPrivate::parseHeader
+        const QByteArrayMatcher lf("\n");
+        const QByteArrayMatcher colon(":");
+        int i = 0;
+        while (i < der.count()) {
+            int j = colon.indexIn(der, i); // field-name
+            if (j == -1)
+                break;
+            const QByteArray field = der.mid(i, j - i).trimmed();
+            j++;
+            // any number of LWS is allowed before and after the value
+            QByteArray value;
+            do {
+                i = lf.indexIn(der, j);
+                if (i == -1)
+                    break;
+                if (!value.isEmpty())
+                    value += ' ';
+                // check if we have CRLF or only LF
+                bool hasCR = (i && der[i-1] == '\r');
+                int length = i -(hasCR ? 1: 0) - j;
+                value += der.mid(j, length).trimmed();
+                j = ++i;
+            } while (i < der.count() && (der.at(i) == ' ' || der.at(i) == '\t'));
+            if (i == -1)
+                break; // something is wrong
+
+            headers->insert(field, value);
+        }
+        der = der.mid(i);
+    }
+
     return QByteArray::fromBase64(der); // ignores newlines
 }
 
 /*!
     Constructs a QSslKey by decoding the string in the byte array
     \a encoded using a specified \a algorithm and \a encoding format.
-    If the encoded key is encrypted, \a passPhrase is used to decrypt
-    it. \a type specifies whether the key is public or private.
+    \a type specifies whether the key is public or private.
+
+    If the key is encoded as PEM and encrypted, \a passPhrase is used
+    to decrypt it.
 
     After construction, use isNull() to check if \a encoded contained
     a valid key.
@@ -241,16 +224,19 @@ QSslKey::QSslKey(const QByteArray &encoded, QSsl::KeyAlgorithm algorithm,
 {
     d->type = type;
     d->algorithm = algorithm;
-    d->decodePem((encoding == QSsl::Der)
-                 ? d->pemFromDer(encoded) : encoded,
-                 passPhrase);
+    if (encoding == QSsl::Der)
+        d->decodeDer(encoded);
+    else
+        d->decodePem(encoded, passPhrase);
 }
 
 /*!
     Constructs a QSslKey by reading and decoding data from a
     \a device using a specified \a algorithm and \a encoding format.
-    If the encoded key is encrypted, \a passPhrase is used to decrypt
-    it. \a type specifies whether the key is public or private.
+    \a type specifies whether the key is public or private.
+
+    If the key is encoded as PEM and encrypted, \a passPhrase is used
+    to decrypt it.
 
     After construction, use isNull() to check if \a device provided
     a valid key.
@@ -264,9 +250,10 @@ QSslKey::QSslKey(QIODevice *device, QSsl::KeyAlgorithm algorithm, QSsl::Encoding
         encoded = device->readAll();
     d->type = type;
     d->algorithm = algorithm;
-    d->decodePem((encoding == QSsl::Der) ?
-                 d->pemFromDer(encoded) : encoded,
-                 passPhrase);
+    if (encoding == QSsl::Der)
+        d->decodeDer(encoded);
+    else
+        d->decodePem(encoded, passPhrase);
 }
 
 /*!
@@ -281,7 +268,11 @@ QSslKey::QSslKey(QIODevice *device, QSsl::KeyAlgorithm algorithm, QSsl::Encoding
 QSslKey::QSslKey(Qt::HANDLE handle, QSsl::KeyType type)
     : d(new QSslKeyPrivate)
 {
+#ifndef QT_NO_OPENSSL
     d->opaque = reinterpret_cast<EVP_PKEY *>(handle);
+#else
+    d->opaque = handle;
+#endif
     d->algorithm = QSsl::Opaque;
     d->type = type;
     d->isNull = !d->opaque;
@@ -346,11 +337,7 @@ void QSslKey::clear()
 */
 int QSslKey::length() const
 {
-    if (d->isNull || d->algorithm == QSsl::Opaque)
-        return -1;
-
-    return (d->algorithm == QSsl::Rsa)
-           ? q_BN_num_bits(d->rsa->n) : q_BN_num_bits(d->dsa->p);
+    return d->length();
 }
 
 /*!
@@ -370,17 +357,26 @@ QSsl::KeyAlgorithm QSslKey::algorithm() const
 }
 
 /*!
-  Returns the key in DER encoding. The result is encrypted with
-  \a passPhrase if the key is a private key and \a passPhrase is
-  non-empty.
+  Returns the key in DER encoding.
+
+  The \a passPhrase argument should be omitted as DER cannot be
+  encrypted. It will be removed in a future version of Qt.
 */
-// ### autotest failure for non-empty passPhrase and private key
 QByteArray QSslKey::toDer(const QByteArray &passPhrase) const
 {
     if (d->isNull || d->algorithm == QSsl::Opaque)
         return QByteArray();
 
-    return d->derFromPem(toPem(passPhrase));
+    // Encrypted DER is nonsense, see QTBUG-41038.
+    if (d->type == QSsl::PrivateKey && !passPhrase.isEmpty())
+        return QByteArray();
+
+#ifndef QT_NO_OPENSSL
+    QMap<QByteArray, QByteArray> headers;
+    return d->derFromPem(toPem(passPhrase), &headers);
+#else
+    return d->derData;
+#endif
 }
 
 /*!
@@ -390,51 +386,7 @@ QByteArray QSslKey::toDer(const QByteArray &passPhrase) const
 */
 QByteArray QSslKey::toPem(const QByteArray &passPhrase) const
 {
-    if (!QSslSocket::supportsSsl() || d->isNull || d->algorithm == QSsl::Opaque)
-        return QByteArray();
-
-    BIO *bio = q_BIO_new(q_BIO_s_mem());
-    if (!bio)
-        return QByteArray();
-
-    bool fail = false;
-
-    if (d->algorithm == QSsl::Rsa) {
-        if (d->type == QSsl::PublicKey) {
-            if (!q_PEM_write_bio_RSA_PUBKEY(bio, d->rsa))
-                fail = true;
-        } else {
-            if (!q_PEM_write_bio_RSAPrivateKey(
-                    bio, d->rsa,
-                    // ### the cipher should be selectable in the API:
-                    passPhrase.isEmpty() ? (const EVP_CIPHER *)0 : q_EVP_des_ede3_cbc(),
-                    (uchar *)passPhrase.data(), passPhrase.size(), 0, 0)) {
-                fail = true;
-            }
-        }
-    } else {
-        if (d->type == QSsl::PublicKey) {
-            if (!q_PEM_write_bio_DSA_PUBKEY(bio, d->dsa))
-                fail = true;
-        } else {
-            if (!q_PEM_write_bio_DSAPrivateKey(
-                    bio, d->dsa,
-                    // ### the cipher should be selectable in the API:
-                    passPhrase.isEmpty() ? (const EVP_CIPHER *)0 : q_EVP_des_ede3_cbc(),
-                    (uchar *)passPhrase.data(), passPhrase.size(), 0, 0)) {
-                fail = true;
-            }
-        }
-    }
-
-    QByteArray pem;
-    if (!fail) {
-        char *data;
-        long size = q_BIO_get_mem_data(bio, &data);
-        pem = QByteArray(data, size);
-    }
-    q_BIO_free(bio);
-    return pem;
+    return d->toPem(passPhrase);
 }
 
 /*!
@@ -450,16 +402,7 @@ QByteArray QSslKey::toPem(const QByteArray &passPhrase) const
 */
 Qt::HANDLE QSslKey::handle() const
 {
-    switch (d->algorithm) {
-    case QSsl::Opaque:
-        return Qt::HANDLE(d->opaque);
-    case QSsl::Rsa:
-        return Qt::HANDLE(d->rsa);
-    case QSsl::Dsa:
-        return Qt::HANDLE(d->dsa);
-    default:
-        return Qt::HANDLE(NULL);
-    }
+    return d->handle();
 }
 
 /*!
diff --git a/src/network/ssl/qsslkey_p.h b/src/network/ssl/qsslkey_p.h
index 54d12d76fb..1254b33dfb 100644
--- a/src/network/ssl/qsslkey_p.h
+++ b/src/network/ssl/qsslkey_p.h
@@ -1,47 +1,39 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 
-#ifndef QSSLKEY_P_H
-#define QSSLKEY_P_H
+#ifndef QSSLKEY_OPENSSL_P_H
+#define QSSLKEY_OPENSSL_P_H
 
 #include "qsslkey.h"
 
@@ -58,8 +50,10 @@
 
 #include "qsslsocket_p.h" // includes wincrypt.h
 
+#ifndef QT_NO_OPENSSL
 #include <openssl/rsa.h>
 #include <openssl/dsa.h>
+#endif
 
 QT_BEGIN_NAMESPACE
 
@@ -67,9 +61,11 @@ class QSslKeyPrivate
 {
 public:
     inline QSslKeyPrivate()
-        : rsa(0)
+        : opaque(0)
+#ifndef QT_NO_OPENSSL
+        , rsa(0)
         , dsa(0)
-        , opaque(0)
+#endif
     {
         clear();
     }
@@ -79,19 +75,42 @@ public:
 
     void clear(bool deep = true);
 
+#ifndef QT_NO_OPENSSL
+    bool fromEVP_PKEY(EVP_PKEY *pkey);
+#endif
+    void decodeDer(const QByteArray &der, bool deepClear = true);
     void decodePem(const QByteArray &pem, const QByteArray &passPhrase,
                    bool deepClear = true);
     QByteArray pemHeader() const;
     QByteArray pemFooter() const;
-    QByteArray pemFromDer(const QByteArray &der) const;
-    QByteArray derFromPem(const QByteArray &pem) const;
+    QByteArray pemFromDer(const QByteArray &der, const QMap<QByteArray, QByteArray> &headers) const;
+    QByteArray derFromPem(const QByteArray &pem, QMap<QByteArray, QByteArray> *headers) const;
+
+    int length() const;
+    QByteArray toPem(const QByteArray &passPhrase) const;
+    Qt::HANDLE handle() const;
 
     bool isNull;
     QSsl::KeyType type;
     QSsl::KeyAlgorithm algorithm;
+#ifndef QT_NO_OPENSSL
+    EVP_PKEY *opaque;
     RSA *rsa;
     DSA *dsa;
-    EVP_PKEY *opaque;
+#else
+    enum Cipher {
+        DesCbc,
+        DesEde3Cbc,
+        Rc2Cbc
+    };
+
+    Q_AUTOTEST_EXPORT static QByteArray decrypt(Cipher cipher, const QByteArray &data, const QByteArray &key, const QByteArray &iv);
+    Q_AUTOTEST_EXPORT static QByteArray encrypt(Cipher cipher, const QByteArray &data, const QByteArray &key, const QByteArray &iv);
+
+    Qt::HANDLE opaque;
+    QByteArray derData;
+    int keyLength;
+#endif
 
     QAtomicInt ref;
 
@@ -101,4 +120,4 @@ private:
 
 QT_END_NAMESPACE
 
-#endif // QSSLKEY_P_H
+#endif // QSSLKEY_OPENSSL_P_H
diff --git a/src/network/ssl/qsslkey_qt.cpp b/src/network/ssl/qsslkey_qt.cpp
new file mode 100644
index 0000000000..bc1ebc3c08
--- /dev/null
+++ b/src/network/ssl/qsslkey_qt.cpp
@@ -0,0 +1,246 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Jeremy Lainé <jeremy.laine@m4x.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qsslkey.h"
+#include "qsslkey_p.h"
+#include "qasn1element_p.h"
+
+#include <QtCore/qcryptographichash.h>
+
+QT_USE_NAMESPACE
+
+static const quint8 bits_table[256] = {
+    0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,
+    5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
+    6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
+    6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
+    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+};
+
+static int numberOfBits(const QByteArray &modulus)
+{
+    int bits = modulus.size() * 8;
+    for (int i = 0; i < modulus.size(); ++i) {
+        quint8 b = modulus[i];
+        bits -= 8;
+        if (b != 0) {
+            bits += bits_table[b];
+            break;
+        }
+    }
+    return bits;
+}
+
+static QByteArray deriveKey(QSslKeyPrivate::Cipher cipher, const QByteArray &passPhrase, const QByteArray &iv)
+{
+    QByteArray key;
+    QCryptographicHash hash(QCryptographicHash::Md5);
+    hash.addData(passPhrase);
+    hash.addData(iv);
+    switch (cipher) {
+    case QSslKeyPrivate::DesCbc:
+        key = hash.result().left(8);
+        break;
+    case QSslKeyPrivate::DesEde3Cbc:
+        key = hash.result();
+        hash.reset();
+        hash.addData(key);
+        hash.addData(passPhrase);
+        hash.addData(iv);
+        key += hash.result().left(8);
+        break;
+    case QSslKeyPrivate::Rc2Cbc:
+        key = hash.result();
+        break;
+    }
+    return key;
+}
+
+void QSslKeyPrivate::clear(bool deep)
+{
+    Q_UNUSED(deep);
+    isNull = true;
+    derData.clear();
+    keyLength = -1;
+}
+
+void QSslKeyPrivate::decodeDer(const QByteArray &der, bool deepClear)
+{
+    clear(deepClear);
+
+    if (der.isEmpty())
+        return;
+
+    QAsn1Element elem;
+    if (!elem.read(der) || elem.type() != QAsn1Element::SequenceType)
+        return;
+
+    if (type == QSsl::PublicKey) {
+        // key info
+        QDataStream keyStream(elem.value());
+        if (!elem.read(keyStream) || elem.type() != QAsn1Element::SequenceType)
+            return;
+        QVector<QAsn1Element> infoItems = elem.toVector();
+        if (infoItems.size() < 2 || infoItems[0].type() != QAsn1Element::ObjectIdentifierType)
+            return;
+        if (algorithm == QSsl::Rsa) {
+            if (infoItems[0].toObjectId() != RSA_ENCRYPTION_OID)
+                return;
+            // key data
+            if (!elem.read(keyStream) || elem.type() != QAsn1Element::BitStringType || elem.value().isEmpty())
+                return;
+            if (!elem.read(elem.value().mid(1)) || elem.type() != QAsn1Element::SequenceType)
+                return;
+            if (!elem.read(elem.value()) || elem.type() != QAsn1Element::IntegerType)
+                return;
+            keyLength = numberOfBits(elem.value());
+        } else if (algorithm == QSsl::Dsa) {
+            if (infoItems[0].toObjectId() != DSA_ENCRYPTION_OID)
+                return;
+            if (infoItems[1].type() != QAsn1Element::SequenceType)
+                return;
+            // key params
+            QVector<QAsn1Element> params = infoItems[1].toVector();
+            if (params.isEmpty() || params[0].type() != QAsn1Element::IntegerType)
+                return;
+            keyLength = numberOfBits(params[0].value());
+        }
+
+    } else {
+        QVector<QAsn1Element> items = elem.toVector();
+        if (items.isEmpty())
+            return;
+
+        // version
+        if (items[0].type() != QAsn1Element::IntegerType || items[0].value().toHex() != "00")
+            return;
+
+        if (algorithm == QSsl::Rsa) {
+            if (items.size() != 9 || items[1].type() != QAsn1Element::IntegerType)
+                return;
+            keyLength = numberOfBits(items[1].value());
+        } else if (algorithm == QSsl::Dsa) {
+            if (items.size() != 6 || items[1].type() != QAsn1Element::IntegerType)
+                return;
+            keyLength = numberOfBits(items[1].value());
+        }
+    }
+
+    derData = der;
+    isNull = false;
+}
+
+void QSslKeyPrivate::decodePem(const QByteArray &pem, const QByteArray &passPhrase,
+                               bool deepClear)
+{
+    QMap<QByteArray, QByteArray> headers;
+    QByteArray data = derFromPem(pem, &headers);
+    if (headers.value("Proc-Type") == "4,ENCRYPTED") {
+        QList<QByteArray> dekInfo = headers.value("DEK-Info").split(',');
+        if (dekInfo.size() != 2) {
+            clear(deepClear);
+            return;
+        }
+
+        Cipher cipher;
+        if (dekInfo.first() == "DES-CBC") {
+            cipher = DesCbc;
+        } else if (dekInfo.first() == "DES-EDE3-CBC") {
+            cipher = DesEde3Cbc;
+        } else if (dekInfo.first() == "RC2-CBC") {
+            cipher = Rc2Cbc;
+        } else {
+            clear(deepClear);
+            return;
+        }
+
+        const QByteArray iv = QByteArray::fromHex(dekInfo.last());
+        const QByteArray key = deriveKey(cipher, passPhrase, iv);
+        data = decrypt(cipher, data, key, iv);
+    }
+    decodeDer(data, deepClear);
+}
+
+int QSslKeyPrivate::length() const
+{
+    return keyLength;
+}
+
+QByteArray QSslKeyPrivate::toPem(const QByteArray &passPhrase) const
+{
+    QByteArray data;
+    QMap<QByteArray, QByteArray> headers;
+
+    if (type == QSsl::PrivateKey && !passPhrase.isEmpty()) {
+        // ### use a cryptographically secure random number generator
+        QByteArray iv;
+        iv.resize(8);
+        for (int i = 0; i < iv.size(); ++i)
+            iv[i] = (qrand() & 0xff);
+
+        Cipher cipher = DesEde3Cbc;
+        const QByteArray key = deriveKey(cipher, passPhrase, iv);
+        data = encrypt(cipher, derData, key, iv);
+
+        headers.insert("Proc-Type", "4,ENCRYPTED");
+        headers.insert("DEK-Info", "DES-EDE3-CBC," + iv.toHex());
+    } else {
+        data = derData;
+    }
+
+    return pemFromDer(data, headers);
+}
+
+Qt::HANDLE QSslKeyPrivate::handle() const
+{
+    return opaque;
+}
diff --git a/src/network/ssl/qsslkey_winrt.cpp b/src/network/ssl/qsslkey_winrt.cpp
new file mode 100644
index 0000000000..c5b4146ee9
--- /dev/null
+++ b/src/network/ssl/qsslkey_winrt.cpp
@@ -0,0 +1,161 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qsslkey.h"
+#include "qsslkey_p.h"
+#include "qsslcertificate_p.h"
+
+#include <QtCore/qfunctions_winrt.h>
+
+#include <wrl.h>
+#include <windows.security.cryptography.h>
+#include <windows.security.cryptography.core.h>
+#include <windows.security.cryptography.certificates.h>
+#include <windows.storage.streams.h>
+#include <robuffer.h>
+
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Security::Cryptography;
+using namespace ABI::Windows::Security::Cryptography::Certificates;
+using namespace ABI::Windows::Security::Cryptography::Core;
+using namespace ABI::Windows::Storage::Streams;
+
+QT_USE_NAMESPACE
+
+struct SslKeyGlobal
+{
+    SslKeyGlobal()
+    {
+        HRESULT hr;
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Security_Cryptography_Core_CryptographicEngine).Get(),
+                                  &engine);
+        Q_ASSERT_SUCCEEDED(hr);
+
+        ComPtr<ISymmetricKeyAlgorithmProviderStatics> keyProviderFactory;
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Security_Cryptography_Core_SymmetricKeyAlgorithmProvider).Get(),
+                                  &keyProviderFactory);
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = keyProviderFactory->OpenAlgorithm(HString::MakeReference(L"DES_CBC").Get(),
+                                               &keyProviders[QSslKeyPrivate::DesCbc]);
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = keyProviderFactory->OpenAlgorithm(HString::MakeReference(L"3DES_CBC").Get(),
+                                               &keyProviders[QSslKeyPrivate::DesEde3Cbc]);
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = keyProviderFactory->OpenAlgorithm(HString::MakeReference(L"RC2_CBC").Get(),
+                                               &keyProviders[QSslKeyPrivate::Rc2Cbc]);
+        Q_ASSERT_SUCCEEDED(hr);
+
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Security_Cryptography_CryptographicBuffer).Get(),
+                                  &bufferFactory);
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+
+    ComPtr<ICryptographicEngineStatics> engine;
+    QHash<QSslKeyPrivate::Cipher, ComPtr<ISymmetricKeyAlgorithmProvider>> keyProviders;
+    ComPtr<ICryptographicBufferStatics> bufferFactory;
+};
+Q_GLOBAL_STATIC(SslKeyGlobal, g)
+
+static QByteArray doCrypt(QSslKeyPrivate::Cipher cipher, QByteArray data, const QByteArray &key, const QByteArray &iv, bool encrypt)
+{
+    HRESULT hr;
+
+    ISymmetricKeyAlgorithmProvider *keyProvider = g->keyProviders[cipher].Get();
+    Q_ASSERT(keyProvider);
+
+    ComPtr<IBuffer> keyBuffer;
+    hr = g->bufferFactory->CreateFromByteArray(key.length(), (BYTE *)key.data(), &keyBuffer);
+    Q_ASSERT_SUCCEEDED(hr);
+    ComPtr<ICryptographicKey> cryptographicKey;
+    hr = keyProvider->CreateSymmetricKey(keyBuffer.Get(), &cryptographicKey);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    UINT32 blockLength;
+    hr = keyProvider->get_BlockLength(&blockLength);
+    Q_ASSERT_SUCCEEDED(hr);
+    if (encrypt) { // Add padding
+        const char padding = blockLength - data.length() % blockLength;
+        data += QByteArray(padding, padding);
+    }
+
+    ComPtr<IBuffer> dataBuffer;
+    hr = g->bufferFactory->CreateFromByteArray(data.length(), (BYTE *)data.data(), &dataBuffer);
+    Q_ASSERT_SUCCEEDED(hr);
+    ComPtr<IBuffer> ivBuffer;
+    hr = g->bufferFactory->CreateFromByteArray(iv.length(), (BYTE *)iv.data(), &ivBuffer);
+    Q_ASSERT_SUCCEEDED(hr);
+    ComPtr<IBuffer> resultBuffer;
+    hr = encrypt ? g->engine->Encrypt(cryptographicKey.Get(), dataBuffer.Get(), ivBuffer.Get(), &resultBuffer)
+                 : g->engine->Decrypt(cryptographicKey.Get(), dataBuffer.Get(), ivBuffer.Get(), &resultBuffer);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    UINT32 resultLength;
+    hr = resultBuffer->get_Length(&resultLength);
+    Q_ASSERT_SUCCEEDED(hr);
+    ComPtr<Windows::Storage::Streams::IBufferByteAccess> bufferAccess;
+    hr = resultBuffer.As(&bufferAccess);
+    Q_ASSERT_SUCCEEDED(hr);
+    byte *resultData;
+    hr = bufferAccess->Buffer(&resultData);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    if (!encrypt) { // Remove padding
+        const uchar padding = resultData[resultLength - 1];
+        if (padding > 0 && padding <= blockLength)
+            resultLength -= padding;
+        else
+            qWarning("Invalid padding length of %u; decryption likely failed.", padding);
+    }
+
+    return QByteArray(reinterpret_cast<const char *>(resultData), resultLength);
+}
+
+QByteArray QSslKeyPrivate::decrypt(Cipher cipher, const QByteArray &data, const QByteArray &key, const QByteArray &iv)
+{
+    return doCrypt(cipher, data, key, iv, false);
+}
+
+QByteArray QSslKeyPrivate::encrypt(Cipher cipher, const QByteArray &data, const QByteArray &key, const QByteArray &iv)
+{
+    return doCrypt(cipher, data, key, iv, true);
+}
diff --git a/src/network/ssl/qsslsocket.cpp b/src/network/ssl/qsslsocket.cpp
index 90f6e25b97..27b085ddbd 100644
--- a/src/network/ssl/qsslsocket.cpp
+++ b/src/network/ssl/qsslsocket.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -291,7 +283,12 @@
 
 #include "qsslsocket.h"
 #include "qsslcipher.h"
+#ifndef QT_NO_OPENSSL
 #include "qsslsocket_openssl_p.h"
+#endif
+#ifdef Q_OS_WINRT
+#include "qsslsocket_winrt_p.h"
+#endif
 #include "qsslconfiguration_p.h"
 
 #include <QtCore/qdebug.h>
@@ -880,6 +877,7 @@ QSslConfiguration QSslSocket::sslConfiguration() const
     QSslConfigurationPrivate *copy = new QSslConfigurationPrivate(d->configuration);
     copy->ref.store(0);              // the QSslConfiguration constructor refs up
     copy->sessionCipher = d->sessionCipher();
+    copy->sessionProtocol = d->sessionProtocol();
 
     return QSslConfiguration(copy);
 }
@@ -1075,6 +1073,20 @@ QSslCipher QSslSocket::sessionCipher() const
 }
 
 /*!
+    Returns the socket's SSL/TLS protocol or UnknownProtocol if the
+    connection isn't encrypted. The socket's protocol for the session
+    is set during the handshake phase.
+
+    \sa protocol(), setProtocol()
+*/
+QSsl::SslProtocol QSslSocket::sessionProtocol() const
+{
+    Q_D(const QSslSocket);
+    return d->sessionProtocol();
+}
+
+
+/*!
     Sets the socket's private \l {QSslKey} {key} to \a key. The
     private key and the local \l {QSslCertificate} {certificate} are
     used by clients and servers that must prove their identity to
@@ -1667,6 +1679,32 @@ QString QSslSocket::sslLibraryVersionString()
 }
 
 /*!
+    \since 5.4
+    Returns the version number of the SSL library in use at compile
+    time. If no SSL support is available then this will return an
+    undefined value.
+
+    \sa sslLibraryVersionNumber()
+*/
+long QSslSocket::sslLibraryBuildVersionNumber()
+{
+    return QSslSocketPrivate::sslLibraryBuildVersionNumber();
+}
+
+/*!
+    \since 5.4
+    Returns the version string of the SSL library in use at compile
+    time. If no SSL support is available then this will return an
+    empty value.
+
+    \sa sslLibraryVersionString()
+*/
+QString QSslSocket::sslLibraryBuildVersionString()
+{
+    return QSslSocketPrivate::sslLibraryBuildVersionString();
+}
+
+/*!
     Starts a delayed SSL handshake for a client connection. This
     function can be called when the socket is in the \l ConnectedState
     but still in the \l UnencryptedMode. If it is not yet connected,
@@ -1848,8 +1886,10 @@ void QSslSocket::disconnectFromHost()
         emit stateChanged(d->state);
     }
 
-    if (!d->writeBuffer.isEmpty())
+    if (!d->writeBuffer.isEmpty()) {
+        d->pendingClose = true;
         return;
+    }
 
     if (d->mode == UnencryptedMode) {
         d->plainSocket->disconnectFromHost();
@@ -2098,6 +2138,7 @@ void QSslConfigurationPrivate::deepCopyDefaultConfiguration(QSslConfigurationPri
     ptr->localCertificateChain = global->localCertificateChain;
     ptr->privateKey = global->privateKey;
     ptr->sessionCipher = global->sessionCipher;
+    ptr->sessionProtocol = global->sessionProtocol;
     ptr->ciphers = global->ciphers;
     ptr->caCertificates = global->caCertificates;
     ptr->protocol = global->protocol;
@@ -2466,6 +2507,65 @@ QSharedPointer<QSslContext> QSslSocketPrivate::sslContext(QSslSocket *socket)
     return (socket) ? socket->d_func()->sslContextPointer : QSharedPointer<QSslContext>();
 }
 
+bool QSslSocketPrivate::isMatchingHostname(const QSslCertificate &cert, const QString &peerName)
+{
+    QStringList commonNameList = cert.subjectInfo(QSslCertificate::CommonName);
+
+    foreach (const QString &commonName, commonNameList) {
+        if (isMatchingHostname(commonName.toLower(), peerName.toLower())) {
+            return true;
+        }
+    }
+
+    foreach (const QString &altName, cert.subjectAlternativeNames().values(QSsl::DnsEntry)) {
+        if (isMatchingHostname(altName.toLower(), peerName.toLower())) {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+bool QSslSocketPrivate::isMatchingHostname(const QString &cn, const QString &hostname)
+{
+    int wildcard = cn.indexOf(QLatin1Char('*'));
+
+    // Check this is a wildcard cert, if not then just compare the strings
+    if (wildcard < 0)
+        return cn == hostname;
+
+    int firstCnDot = cn.indexOf(QLatin1Char('.'));
+    int secondCnDot = cn.indexOf(QLatin1Char('.'), firstCnDot+1);
+
+    // Check at least 3 components
+    if ((-1 == secondCnDot) || (secondCnDot+1 >= cn.length()))
+        return false;
+
+    // Check * is last character of 1st component (ie. there's a following .)
+    if (wildcard+1 != firstCnDot)
+        return false;
+
+    // Check only one star
+    if (cn.lastIndexOf(QLatin1Char('*')) != wildcard)
+        return false;
+
+    // Check characters preceding * (if any) match
+    if (wildcard && (hostname.leftRef(wildcard) != cn.leftRef(wildcard)))
+        return false;
+
+    // Check characters following first . match
+    if (hostname.midRef(hostname.indexOf(QLatin1Char('.'))) != cn.midRef(firstCnDot))
+        return false;
+
+    // Check if the hostname is an IP address, if so then wildcards are not allowed
+    QHostAddress addr(hostname);
+    if (!addr.isNull())
+        return false;
+
+    // Ok, I guess this was a wildcard CN and the hostname matches.
+    return true;
+}
+
 QT_END_NAMESPACE
 
 #include "moc_qsslsocket.cpp"
diff --git a/src/network/ssl/qsslsocket.h b/src/network/ssl/qsslsocket.h
index d89933efda..1fe12e5989 100644
--- a/src/network/ssl/qsslsocket.h
+++ b/src/network/ssl/qsslsocket.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -140,6 +132,7 @@ public:
     QSslCertificate peerCertificate() const;
     QList<QSslCertificate> peerCertificateChain() const;
     QSslCipher sessionCipher() const;
+    QSsl::SslProtocol sessionProtocol() const;
 
     // Private keys, for server sockets.
     void setPrivateKey(const QSslKey &key);
@@ -182,6 +175,8 @@ public:
     static bool supportsSsl();
     static long sslLibraryVersionNumber();
     static QString sslLibraryVersionString();
+    static long sslLibraryBuildVersionNumber();
+    static QString sslLibraryBuildVersionString();
 
     void ignoreSslErrors(const QList<QSslError> &errors);
 
@@ -214,7 +209,7 @@ private:
     Q_PRIVATE_SLOT(d_func(), void _q_flushWriteBuffer())
     Q_PRIVATE_SLOT(d_func(), void _q_flushReadBuffer())
     Q_PRIVATE_SLOT(d_func(), void _q_resumeImplementation())
-#ifdef Q_OS_WIN
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
     Q_PRIVATE_SLOT(d_func(), void _q_caRootLoaded(QSslCertificate,QSslCertificate))
 #endif
     friend class QSslSocketBackendPrivate;
diff --git a/src/network/ssl/qsslsocket_openssl.cpp b/src/network/ssl/qsslsocket_openssl.cpp
index 0315749cb3..1d675edbbb 100644
--- a/src/network/ssl/qsslsocket_openssl.cpp
+++ b/src/network/ssl/qsslsocket_openssl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,6 +54,7 @@
 #include "qsslsocket.h"
 #include "qsslcertificate_p.h"
 #include "qsslcipher_p.h"
+#include "qsslkey_p.h"
 
 #include <QtCore/qdatetime.h>
 #include <QtCore/qdebug.h>
@@ -585,6 +578,16 @@ QString QSslSocketPrivate::sslLibraryVersionString()
     return QString::fromLatin1(versionString);
 }
 
+long QSslSocketPrivate::sslLibraryBuildVersionNumber()
+{
+    return OPENSSL_VERSION_NUMBER;
+}
+
+QString QSslSocketPrivate::sslLibraryBuildVersionString()
+{
+    return QLatin1String(OPENSSL_VERSION_TEXT);
+}
+
 /*!
     \internal
 
@@ -1429,6 +1432,28 @@ QSslCipher QSslSocketBackendPrivate::sessionCipher() const
     return sessionCipher ? QSslCipher_from_SSL_CIPHER(sessionCipher) : QSslCipher();
 }
 
+QSsl::SslProtocol QSslSocketBackendPrivate::sessionProtocol() const
+{
+    if (!ssl)
+        return QSsl::UnknownProtocol;
+    int ver = q_SSL_version(ssl);
+
+    switch (ver) {
+    case 0x2:
+        return QSsl::SslV2;
+    case 0x300:
+        return QSsl::SslV3;
+    case 0x301:
+        return QSsl::TlsV1_0;
+    case 0x302:
+        return QSsl::TlsV1_1;
+    case 0x303:
+        return QSsl::TlsV1_2;
+    }
+
+    return QSsl::UnknownProtocol;
+}
+
 void QSslSocketBackendPrivate::continueHandshake()
 {
     Q_Q(QSslSocket);
@@ -1519,65 +1544,6 @@ QList<QSslCertificate> QSslSocketBackendPrivate::STACKOFX509_to_QSslCertificates
     return certificates;
 }
 
-bool QSslSocketBackendPrivate::isMatchingHostname(const QSslCertificate &cert, const QString &peerName)
-{
-    QStringList commonNameList = cert.subjectInfo(QSslCertificate::CommonName);
-
-    foreach (const QString &commonName, commonNameList) {
-        if (isMatchingHostname(commonName.toLower(), peerName.toLower())) {
-            return true;
-        }
-    }
-
-    foreach (const QString &altName, cert.subjectAlternativeNames().values(QSsl::DnsEntry)) {
-        if (isMatchingHostname(altName.toLower(), peerName.toLower())) {
-            return true;
-        }
-    }
-
-    return false;
-}
-
-bool QSslSocketBackendPrivate::isMatchingHostname(const QString &cn, const QString &hostname)
-{
-    int wildcard = cn.indexOf(QLatin1Char('*'));
-
-    // Check this is a wildcard cert, if not then just compare the strings
-    if (wildcard < 0)
-        return cn == hostname;
-
-    int firstCnDot = cn.indexOf(QLatin1Char('.'));
-    int secondCnDot = cn.indexOf(QLatin1Char('.'), firstCnDot+1);
-
-    // Check at least 3 components
-    if ((-1 == secondCnDot) || (secondCnDot+1 >= cn.length()))
-        return false;
-
-    // Check * is last character of 1st component (ie. there's a following .)
-    if (wildcard+1 != firstCnDot)
-        return false;
-
-    // Check only one star
-    if (cn.lastIndexOf(QLatin1Char('*')) != wildcard)
-        return false;
-
-    // Check characters preceding * (if any) match
-    if (wildcard && (hostname.leftRef(wildcard) != cn.leftRef(wildcard)))
-        return false;
-
-    // Check characters following first . match
-    if (hostname.midRef(hostname.indexOf(QLatin1Char('.'))) != cn.midRef(firstCnDot))
-        return false;
-
-    // Check if the hostname is an IP address, if so then wildcards are not allowed
-    QHostAddress addr(hostname);
-    if (!addr.isNull())
-        return false;
-
-    // Ok, I guess this was a wildcard CN and the hostname matches.
-    return true;
-}
-
 QList<QSslError> QSslSocketBackendPrivate::verify(QList<QSslCertificate> certificateChain, const QString &hostName)
 {
     QList<QSslError> errors;
@@ -1703,4 +1669,72 @@ QList<QSslError> QSslSocketBackendPrivate::verify(QList<QSslCertificate> certifi
     return errors;
 }
 
+bool QSslSocketBackendPrivate::importPKCS12(QIODevice *device,
+                                            QSslKey *key, QSslCertificate *cert,
+                                            QList<QSslCertificate> *caCertificates,
+                                            const QByteArray &passPhrase)
+{
+    if (!supportsSsl())
+        return false;
+
+    // These are required
+    Q_ASSERT(device);
+    Q_ASSERT(key);
+    Q_ASSERT(cert);
+
+    // Read the file into a BIO
+    QByteArray pkcs12data = device->readAll();
+    if (pkcs12data.size() == 0)
+        return false;
+
+    BIO *bio = q_BIO_new_mem_buf(const_cast<char *>(pkcs12data.constData()), pkcs12data.size());
+
+    // Create the PKCS#12 object
+    PKCS12 *p12 = q_d2i_PKCS12_bio(bio, 0);
+    if (!p12) {
+        qWarning("Unable to read PKCS#12 structure, %s", q_ERR_error_string(q_ERR_get_error(), 0));
+        q_BIO_free(bio);
+        return false;
+    }
+
+    // Extract the data
+    EVP_PKEY *pkey;
+    X509 *x509;
+    STACK_OF(X509) *ca = 0;
+
+    if (!q_PKCS12_parse(p12, passPhrase.constData(), &pkey, &x509, &ca)) {
+        qWarning("Unable to parse PKCS#12 structure, %s", q_ERR_error_string(q_ERR_get_error(), 0));
+        q_PKCS12_free(p12);
+        q_BIO_free(bio);
+        return false;
+    }
+
+    // Convert to Qt types
+    if (!key->d->fromEVP_PKEY(pkey)) {
+        qWarning("Unable to convert private key");
+        q_sk_pop_free(reinterpret_cast<STACK *>(ca), reinterpret_cast<void(*)(void*)>(q_sk_free));
+        q_X509_free(x509);
+        q_EVP_PKEY_free(pkey);
+        q_PKCS12_free(p12);
+        q_BIO_free(bio);
+
+        return false;
+    }
+
+    *cert = QSslCertificatePrivate::QSslCertificate_from_X509(x509);
+
+    if (caCertificates)
+        *caCertificates = QSslSocketBackendPrivate::STACKOFX509_to_QSslCertificates(ca);
+
+    // Clean up
+    q_sk_pop_free(reinterpret_cast<STACK *>(ca), reinterpret_cast<void(*)(void*)>(q_sk_free));
+    q_X509_free(x509);
+    q_EVP_PKEY_free(pkey);
+    q_PKCS12_free(p12);
+    q_BIO_free(bio);
+
+    return true;
+}
+
+
 QT_END_NAMESPACE
diff --git a/src/network/ssl/qsslsocket_openssl_android.cpp b/src/network/ssl/qsslsocket_openssl_android.cpp
index 8cff542e47..a27bc85c51 100644
--- a/src/network/ssl/qsslsocket_openssl_android.cpp
+++ b/src/network/ssl/qsslsocket_openssl_android.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/network/ssl/qsslsocket_openssl_p.h b/src/network/ssl/qsslsocket_openssl_p.h
index c8b23e6cad..8b02f32be0 100644
--- a/src/network/ssl/qsslsocket_openssl_p.h
+++ b/src/network/ssl/qsslsocket_openssl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -131,6 +123,7 @@ public:
     void disconnectFromHost();
     void disconnected();
     QSslCipher sessionCipher() const;
+    QSsl::SslProtocol sessionProtocol() const;
     void continueHandshake();
     bool checkSslErrors();
 #ifdef Q_OS_WIN
@@ -141,10 +134,12 @@ public:
     Q_AUTOTEST_EXPORT static long setupOpenSslOptions(QSsl::SslProtocol protocol, QSsl::SslOptions sslOptions);
     static QSslCipher QSslCipher_from_SSL_CIPHER(SSL_CIPHER *cipher);
     static QList<QSslCertificate> STACKOFX509_to_QSslCertificates(STACK_OF(X509) *x509);
-    static bool isMatchingHostname(const QSslCertificate &cert, const QString &peerName);
-    Q_AUTOTEST_EXPORT static bool isMatchingHostname(const QString &cn, const QString &hostname);
     static QList<QSslError> verify(QList<QSslCertificate> certificateChain, const QString &hostName);
     static QString getErrorsFromOpenSsl();
+    static bool importPKCS12(QIODevice *device,
+                             QSslKey *key, QSslCertificate *cert,
+                             QList<QSslCertificate> *caCertificates,
+                             const QByteArray &passPhrase);
 };
 
 #ifdef Q_OS_WIN
diff --git a/src/network/ssl/qsslsocket_openssl_symbols.cpp b/src/network/ssl/qsslsocket_openssl_symbols.cpp
index 4e6200f880..d919d8e934 100644
--- a/src/network/ssl/qsslsocket_openssl_symbols.cpp
+++ b/src/network/ssl/qsslsocket_openssl_symbols.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -146,6 +138,7 @@ DEFINEFUNC(int, CRYPTO_num_locks, DUMMYARG, DUMMYARG, return 0, return)
 DEFINEFUNC(void, CRYPTO_set_locking_callback, void (*a)(int, int, const char *, int), a, return, DUMMYARG)
 DEFINEFUNC(void, CRYPTO_set_id_callback, unsigned long (*a)(), a, return, DUMMYARG)
 DEFINEFUNC(void, CRYPTO_free, void *a, a, return, DUMMYARG)
+DEFINEFUNC(DSA *, DSA_new, DUMMYARG, DUMMYARG, return 0, return)
 DEFINEFUNC(void, DSA_free, DSA *a, a, return, DUMMYARG)
 #if  OPENSSL_VERSION_NUMBER < 0x00908000L
 DEFINEFUNC3(X509 *, d2i_X509, X509 **a, a, unsigned char **b, b, long c, c, return 0, return)
@@ -186,6 +179,7 @@ DEFINEFUNC2(int, PEM_write_bio_DSA_PUBKEY, BIO *a, a, DSA *b, b, return 0, retur
 DEFINEFUNC2(int, PEM_write_bio_RSA_PUBKEY, BIO *a, a, RSA *b, b, return 0, return)
 DEFINEFUNC2(void, RAND_seed, const void *a, a, int b, b, return, DUMMYARG)
 DEFINEFUNC(int, RAND_status, void, DUMMYARG, return -1, return)
+DEFINEFUNC(RSA *, RSA_new, DUMMYARG, DUMMYARG, return 0, return)
 DEFINEFUNC(void, RSA_free, RSA *a, a, return, DUMMYARG)
 DEFINEFUNC(int, sk_num, STACK *a, a, return -1, return)
 DEFINEFUNC2(void, sk_pop_free, STACK *a, a, void (*b)(void*), b, return, DUMMYARG)
@@ -239,6 +233,7 @@ DEFINEFUNC(const SSL_CIPHER *, SSL_get_current_cipher, SSL *a, a, return 0, retu
 #else
 DEFINEFUNC(SSL_CIPHER *, SSL_get_current_cipher, SSL *a, a, return 0, return)
 #endif
+DEFINEFUNC(int, SSL_version, const SSL *a, a, return 0, return)
 DEFINEFUNC2(int, SSL_get_error, SSL *a, a, int b, b, return -1, return)
 DEFINEFUNC(STACK_OF(X509) *, SSL_get_peer_cert_chain, SSL *a, a, return 0, return)
 DEFINEFUNC(X509 *, SSL_get_peer_certificate, SSL *a, a, return 0, return)
@@ -316,6 +311,7 @@ DEFINEFUNC2(int, ASN1_STRING_print, BIO *a, a, const ASN1_STRING *b, b, return 0
 #else
 DEFINEFUNC2(int, ASN1_STRING_print, BIO *a, a, ASN1_STRING *b, b, return 0, return)
 #endif
+DEFINEFUNC2(int, X509_check_issued, X509 *a, a, X509 *b, b, return -1, return)
 DEFINEFUNC(X509_NAME *, X509_get_issuer_name, X509 *a, a, return 0, return)
 DEFINEFUNC(X509_NAME *, X509_get_subject_name, X509 *a, a, return 0, return)
 DEFINEFUNC(int, X509_verify_cert, X509_STORE_CTX *a, a, return -1, return)
@@ -370,6 +366,11 @@ DEFINEFUNC(EC_KEY *, EC_KEY_new_by_curve_name, int nid, nid, return 0, return)
 DEFINEFUNC(void, EC_KEY_free, EC_KEY *ecdh, ecdh, return, DUMMYARG)
 #endif // OPENSSL_NO_EC
 
+DEFINEFUNC5(int, PKCS12_parse, PKCS12 *p12, p12, const char *pass, pass, EVP_PKEY **pkey, pkey, \
+            X509 **cert, cert, STACK_OF(X509) **ca, ca, return 1, return);
+DEFINEFUNC2(PKCS12 *, d2i_PKCS12_bio, BIO *bio, bio, PKCS12 **pkcs12, pkcs12, return 0, return);
+DEFINEFUNC(void, PKCS12_free, PKCS12 *pkcs12, pkcs12, return, DUMMYARG)
+
 #define RESOLVEFUNC(func) \
     if (!(_q_##func = _q_PTR_##func(libs.first->resolve(#func)))     \
         && !(_q_##func = _q_PTR_##func(libs.second->resolve(#func)))) \
@@ -688,6 +689,7 @@ bool q_resolveOpenSslSymbols()
     RESOLVEFUNC(CRYPTO_num_locks)
     RESOLVEFUNC(CRYPTO_set_id_callback)
     RESOLVEFUNC(CRYPTO_set_locking_callback)
+    RESOLVEFUNC(DSA_new)
     RESOLVEFUNC(DSA_free)
     RESOLVEFUNC(ERR_error_string)
     RESOLVEFUNC(ERR_get_error)
@@ -720,6 +722,7 @@ bool q_resolveOpenSslSymbols()
     RESOLVEFUNC(PEM_write_bio_RSA_PUBKEY)
     RESOLVEFUNC(RAND_seed)
     RESOLVEFUNC(RAND_status)
+    RESOLVEFUNC(RSA_new)
     RESOLVEFUNC(RSA_free)
     RESOLVEFUNC(sk_new_null)
     RESOLVEFUNC(sk_push)
@@ -748,6 +751,7 @@ bool q_resolveOpenSslSymbols()
     RESOLVEFUNC(SSL_free)
     RESOLVEFUNC(SSL_get_ciphers)
     RESOLVEFUNC(SSL_get_current_cipher)
+    RESOLVEFUNC(SSL_version)
     RESOLVEFUNC(SSL_get_error)
     RESOLVEFUNC(SSL_get_peer_cert_chain)
     RESOLVEFUNC(SSL_get_peer_certificate)
@@ -821,6 +825,7 @@ bool q_resolveOpenSslSymbols()
     RESOLVEFUNC(BASIC_CONSTRAINTS_free)
     RESOLVEFUNC(AUTHORITY_KEYID_free)
     RESOLVEFUNC(ASN1_STRING_print)
+    RESOLVEFUNC(X509_check_issued)
     RESOLVEFUNC(X509_get_issuer_name)
     RESOLVEFUNC(X509_get_subject_name)
     RESOLVEFUNC(X509_verify_cert)
@@ -851,6 +856,9 @@ bool q_resolveOpenSslSymbols()
     RESOLVEFUNC(EC_KEY_new_by_curve_name)
     RESOLVEFUNC(EC_KEY_free)
 #endif // OPENSSL_NO_EC
+    RESOLVEFUNC(PKCS12_parse)
+    RESOLVEFUNC(d2i_PKCS12_bio)
+    RESOLVEFUNC(PKCS12_free)
 
     symbolsResolved = true;
     delete libs.first;
diff --git a/src/network/ssl/qsslsocket_openssl_symbols_p.h b/src/network/ssl/qsslsocket_openssl_symbols_p.h
index 68f5709b93..e2e09e4feb 100644
--- a/src/network/ssl/qsslsocket_openssl_symbols_p.h
+++ b/src/network/ssl/qsslsocket_openssl_symbols_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 BlackBerry Limited. All rights reserved.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -233,6 +225,7 @@ int q_CRYPTO_num_locks();
 void q_CRYPTO_set_locking_callback(void (*a)(int, int, const char *, int));
 void q_CRYPTO_set_id_callback(unsigned long (*a)());
 void q_CRYPTO_free(void *a);
+DSA *q_DSA_new();
 void q_DSA_free(DSA *a);
 #if OPENSSL_VERSION_NUMBER >= 0x00908000L
 // 0.9.8 broke SC and BC by changing this function's signature.
@@ -277,6 +270,7 @@ int q_PEM_write_bio_DSA_PUBKEY(BIO *a, DSA *b);
 int q_PEM_write_bio_RSA_PUBKEY(BIO *a, RSA *b);
 void q_RAND_seed(const void *a, int b);
 int q_RAND_status();
+RSA *q_RSA_new();
 void q_RSA_free(RSA *a);
 int q_sk_num(STACK *a);
 void q_sk_pop_free(STACK *a, void (*b)(void *));
@@ -330,6 +324,7 @@ const SSL_CIPHER *q_SSL_get_current_cipher(SSL *a);
 #else
 SSL_CIPHER *q_SSL_get_current_cipher(SSL *a);
 #endif
+int q_SSL_version(const SSL *a);
 int q_SSL_get_error(SSL *a, int b);
 STACK_OF(X509) *q_SSL_get_peer_cert_chain(SSL *a);
 X509 *q_SSL_get_peer_certificate(SSL *a);
@@ -407,6 +402,7 @@ int q_ASN1_STRING_print(BIO *a, const ASN1_STRING *b);
 #else
 int q_ASN1_STRING_print(BIO *a, ASN1_STRING *b);
 #endif
+int q_X509_check_issued(X509 *a, X509 *b);
 X509_NAME *q_X509_get_issuer_name(X509 *a);
 X509_NAME *q_X509_get_subject_name(X509 *a);
 int q_X509_verify_cert(X509_STORE_CTX *ctx);
@@ -441,6 +437,12 @@ void q_EC_KEY_free(EC_KEY *ecdh);
 #define q_SSL_CTX_set_tmp_ecdh(ctx, ecdh) q_SSL_CTX_ctrl((ctx), SSL_CTRL_SET_TMP_ECDH, 0, (char *)ecdh)
 #endif // OPENSSL_NO_EC
 
+// PKCS#12 support
+int q_PKCS12_parse(PKCS12 *p12, const char *pass, EVP_PKEY **pkey, X509 **cert, STACK_OF(X509) **ca);
+PKCS12 *q_d2i_PKCS12_bio(BIO *bio, PKCS12 **pkcs12);
+void q_PKCS12_free(PKCS12 *pkcs12);
+
+
 #define q_BIO_get_mem_data(b, pp) (int)q_BIO_ctrl(b,BIO_CTRL_INFO,0,(char *)pp)
 #define q_BIO_pending(b) (int)q_BIO_ctrl(b,BIO_CTRL_PENDING,0,NULL)
 #ifdef SSLEAY_MACROS
diff --git a/src/network/ssl/qsslsocket_p.h b/src/network/ssl/qsslsocket_p.h
index 6281753225..6e7a2c5520 100644
--- a/src/network/ssl/qsslsocket_p.h
+++ b/src/network/ssl/qsslsocket_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtNetwork module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,7 +51,9 @@
 #include <private/qtcpsocket_p.h>
 #include "qsslkey.h"
 #include "qsslconfiguration_p.h"
-#include <private/qsslcontext_p.h>
+#ifndef QT_NO_OPENSSL
+#include <private/qsslcontext_openssl_p.h>
+#endif
 
 #include <QtCore/qstringlist.h>
 
@@ -70,11 +64,13 @@
 #include <CoreFoundation/CFArray.h>
 #elif defined(Q_OS_WIN)
 #include <QtCore/qt_windows.h>
+#ifndef Q_OS_WINRT
 #include <wincrypt.h>
+#endif // !Q_OS_WINRT
 #ifndef HCRYPTPROV_LEGACY
 #define HCRYPTPROV_LEGACY HCRYPTPROV
-#endif
-#endif
+#endif // !HCRYPTPROV_LEGACY
+#endif // Q_OS_WIN
 
 QT_BEGIN_NAMESPACE
 
@@ -84,7 +80,7 @@ QT_BEGIN_NAMESPACE
     typedef OSStatus (*PtrSecTrustCopyAnchorCertificates)(CFArrayRef*);
 #endif
 
-#if defined(Q_OS_WIN)
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
 #if defined(Q_OS_WINCE)
     typedef HCERTSTORE (WINAPI *PtrCertOpenSystemStoreW)(LPCSTR, DWORD, HCRYPTPROV_LEGACY, DWORD, const void*);
 #else
@@ -92,7 +88,7 @@ QT_BEGIN_NAMESPACE
 #endif
     typedef PCCERT_CONTEXT (WINAPI *PtrCertFindCertificateInStore)(HCERTSTORE, DWORD, DWORD, DWORD, const void*, PCCERT_CONTEXT);
     typedef BOOL (WINAPI *PtrCertCloseStore)(HCERTSTORE, DWORD);
-#endif
+#endif // Q_OS_WIN && !Q_OS_WINRT
 
 
 
@@ -129,6 +125,8 @@ public:
     static bool supportsSsl();
     static long sslLibraryVersionNumber();
     static QString sslLibraryVersionString();
+    static long sslLibraryBuildVersionNumber();
+    static QString sslLibraryBuildVersionString();
     static void ensureInitialized();
     static void deinitialize();
     static QList<QSslCipher> defaultCiphers();
@@ -144,16 +142,18 @@ public:
                                          QRegExp::PatternSyntax syntax);
     static void addDefaultCaCertificate(const QSslCertificate &cert);
     static void addDefaultCaCertificates(const QList<QSslCertificate> &certs);
+    static bool isMatchingHostname(const QSslCertificate &cert, const QString &peerName);
+    Q_AUTOTEST_EXPORT static bool isMatchingHostname(const QString &cn, const QString &hostname);
 
 #if defined(Q_OS_MACX)
     static PtrSecCertificateCopyData ptrSecCertificateCopyData;
     static PtrSecTrustSettingsCopyCertificates ptrSecTrustSettingsCopyCertificates;
     static PtrSecTrustCopyAnchorCertificates ptrSecTrustCopyAnchorCertificates;
-#elif defined(Q_OS_WIN)
+#elif defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
     static PtrCertOpenSystemStoreW ptrCertOpenSystemStoreW;
     static PtrCertFindCertificateInStore ptrCertFindCertificateInStore;
     static PtrCertCloseStore ptrCertCloseStore;
-#endif
+#endif // Q_OS_WIN && !Q_OS_WINRT
 
     // The socket itself, including private slots.
     QTcpSocket *plainSocket;
@@ -174,7 +174,7 @@ public:
     void _q_flushWriteBuffer();
     void _q_flushReadBuffer();
     void _q_resumeImplementation();
-#ifdef Q_OS_WIN
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
     virtual void _q_caRootLoaded(QSslCertificate,QSslCertificate) = 0;
 #endif
 
@@ -190,6 +190,7 @@ public:
     virtual void disconnectFromHost() = 0;
     virtual void disconnected() = 0;
     virtual QSslCipher sessionCipher() const = 0;
+    virtual QSsl::SslProtocol sessionProtocol() const = 0;
     virtual void continueHandshake() = 0;
 
     Q_AUTOTEST_EXPORT static bool rootCertOnDemandLoadingSupported();
diff --git a/src/network/ssl/qsslsocket_winrt.cpp b/src/network/ssl/qsslsocket_winrt.cpp
new file mode 100644
index 0000000000..c9ddd9ec1b
--- /dev/null
+++ b/src/network/ssl/qsslsocket_winrt.cpp
@@ -0,0 +1,688 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qsslsocket_winrt_p.h"
+#include "qsslsocket.h"
+#include "qsslcertificate_p.h"
+#include "qsslcipher_p.h"
+
+#include <QtCore/QCoreApplication>
+#include <QtCore/QSysInfo>
+#include <QtCore/qfunctions_winrt.h>
+#include <private/qnativesocketengine_winrt_p.h>
+
+#include <windows.networking.h>
+#include <windows.networking.sockets.h>
+#include <windows.security.cryptography.certificates.h>
+#include <robuffer.h>
+
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Foundation::Collections;
+using namespace ABI::Windows::Networking;
+using namespace ABI::Windows::Networking::Sockets;
+using namespace ABI::Windows::Security::Cryptography::Certificates;
+using namespace ABI::Windows::Storage::Streams;
+
+QT_BEGIN_NAMESPACE
+
+// For QSet<QSslError>
+inline uint qHash(const QSslError &error, uint seed)
+    Q_DECL_NOEXCEPT_EXPR(noexcept(qHash(error)))
+{ return (qHash(error.error()) ^ seed); }
+
+// For QSet<QSslCertificate>
+inline uint qHash(const QSslCertificate &certificate, uint seed)
+    Q_DECL_NOEXCEPT_EXPR(noexcept(qHash(certificate)))
+{ return (qHash(certificate.handle()) ^ seed); }
+
+bool QSslSocketPrivate::s_libraryLoaded = true;
+bool QSslSocketPrivate::s_loadRootCertsOnDemand = true;
+bool QSslSocketPrivate::s_loadedCiphersAndCerts = false;
+
+struct SslSocketGlobal
+{
+    SslSocketGlobal()
+    {
+        HRESULT hr;
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Networking_HostName).Get(),
+                                  &hostNameFactory);
+        Q_ASSERT_SUCCEEDED(hr);
+
+        ComPtr<ICertificateStoresStatics> certificateStores;
+        hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Security_Cryptography_Certificates_CertificateStores).Get(),
+                                  &certificateStores);
+        Q_ASSERT_SUCCEEDED(hr);
+
+        hr = certificateStores->get_TrustedRootCertificationAuthorities(&rootStore);
+        Q_ASSERT_SUCCEEDED(hr);
+
+        ComPtr<IAsyncOperation<IVectorView<Certificate *> *>> op;
+        hr = certificateStores->FindAllAsync(&op);
+        Q_ASSERT_SUCCEEDED(hr);
+        ComPtr<IVectorView<Certificate *>> certificates;
+        hr = QWinRTFunctions::await(op, certificates.GetAddressOf());
+        Q_ASSERT_SUCCEEDED(hr);
+        quint32 size;
+        hr = certificates->get_Size(&size);
+        Q_ASSERT_SUCCEEDED(hr);
+        for (quint32 i = 0; i < size; ++i) {
+            ComPtr<ICertificate> certificate;
+            hr = certificates->GetAt(i, &certificate);
+            Q_ASSERT_SUCCEEDED(hr);
+            systemCaCertificates.append(QSslCertificatePrivate::QSslCertificate_from_Certificate(certificate.Get()));
+        }
+    }
+
+    void syncCaCertificates(const QSet<QSslCertificate> &add, const QSet<QSslCertificate> &remove)
+    {
+        QMutexLocker locker(&certificateMutex);
+        foreach (const QSslCertificate &certificate, add) {
+            QHash<QSslCertificate, QAtomicInt>::iterator it = additionalCertificates.find(certificate);
+            if (it != additionalCertificates.end()) {
+                it.value().ref(); // Add a reference
+            } else {
+                // install certificate
+                HRESULT hr;
+                hr = rootStore->Add(static_cast<ICertificate *>(certificate.handle()));
+                Q_ASSERT_SUCCEEDED(hr);
+                additionalCertificates.insert(certificate, 1);
+            }
+        }
+        foreach (const QSslCertificate &certificate, remove) {
+            QHash<QSslCertificate, QAtomicInt>::iterator it = additionalCertificates.find(certificate);
+            if (it != additionalCertificates.end() && !it.value().deref()) {
+                // no more references, remove certificate
+                HRESULT hr;
+                hr = rootStore->Delete(static_cast<ICertificate *>(certificate.handle()));
+                Q_ASSERT_SUCCEEDED(hr);
+                additionalCertificates.erase(it);
+            }
+        }
+    }
+
+    ComPtr<IHostNameFactory> hostNameFactory;
+    QList<QSslCertificate> systemCaCertificates;
+
+private:
+    QMutex certificateMutex;
+    ComPtr<ICertificateStore> rootStore;
+    QHash<QSslCertificate, QAtomicInt> additionalCertificates;
+};
+Q_GLOBAL_STATIC(SslSocketGlobal, g)
+
+// Called on the socket's thread to avoid cross-thread deletion
+void QSslSocketConnectionHelper::disconnectSocketFromHost()
+{
+    if (d->plainSocket)
+        d->plainSocket->disconnectFromHost();
+}
+
+QSslSocketBackendPrivate::QSslSocketBackendPrivate()
+    : connectionHelper(new QSslSocketConnectionHelper(this))
+{
+}
+
+QSslSocketBackendPrivate::~QSslSocketBackendPrivate()
+{
+    g->syncCaCertificates(QSet<QSslCertificate>(), previousCaCertificates);
+}
+
+void QSslSocketPrivate::deinitialize()
+{
+    Q_UNIMPLEMENTED();
+}
+
+bool QSslSocketPrivate::supportsSsl()
+{
+    return true;
+}
+
+void QSslSocketPrivate::ensureInitialized()
+{
+    if (s_loadedCiphersAndCerts)
+        return;
+    s_loadedCiphersAndCerts = true;
+    resetDefaultCiphers();
+}
+
+long QSslSocketPrivate::sslLibraryVersionNumber()
+{
+    return QSysInfo::windowsVersion();
+}
+
+QString QSslSocketPrivate::sslLibraryVersionString()
+{
+    switch (QSysInfo::windowsVersion()) {
+    case QSysInfo::WV_WINDOWS8_1:
+        return QStringLiteral("Windows Runtime 8.1 SSL library");
+    default:
+        break;
+    }
+    return QStringLiteral("Windows Runtime SSL library");
+}
+
+long QSslSocketPrivate::sslLibraryBuildVersionNumber()
+{
+    Q_UNIMPLEMENTED();
+    return 0;
+}
+
+QString QSslSocketPrivate::sslLibraryBuildVersionString()
+{
+    Q_UNIMPLEMENTED();
+    return QString::number(sslLibraryBuildVersionNumber());
+}
+
+void QSslSocketPrivate::resetDefaultCiphers()
+{
+    setDefaultSupportedCiphers(QSslSocketBackendPrivate::defaultCiphers());
+    setDefaultCiphers(QSslSocketBackendPrivate::defaultCiphers());
+}
+
+
+QList<QSslCipher> QSslSocketBackendPrivate::defaultCiphers()
+{
+    QList<QSslCipher> ciphers;
+    const QString protocolStrings[] = { QStringLiteral("SSLv3"), QStringLiteral("TLSv1"),
+                                        QStringLiteral("TLSv1.1"), QStringLiteral("TLSv1.2") };
+    const QSsl::SslProtocol protocols[] = { QSsl::SslV3, QSsl::TlsV1_0, QSsl::TlsV1_1, QSsl::TlsV1_2 };
+    for (int i = 0; i < ARRAYSIZE(protocols); ++i) {
+        QSslCipher cipher;
+        cipher.d->isNull = false;
+        cipher.d->name = QStringLiteral("WINRT");
+        cipher.d->protocol = protocols[i];
+        cipher.d->protocolString = protocolStrings[i];
+        ciphers.append(cipher);
+    }
+    return ciphers;
+}
+
+QList<QSslCertificate> QSslSocketPrivate::systemCaCertificates()
+{
+    return g->systemCaCertificates;
+}
+
+void QSslSocketBackendPrivate::startClientEncryption()
+{
+    Q_Q(QSslSocket);
+
+    QSsl::SslProtocol protocol = q->protocol();
+    switch (q->protocol()) {
+    case QSsl::AnyProtocol:
+    case QSsl::SslV3:
+        protectionLevel = SocketProtectionLevel_Ssl; // Only use this value if weak cipher support is required
+        break;
+    case QSsl::SecureProtocols:
+    case QSsl::TlsV1SslV3:
+    case QSsl::TlsV1_0:
+        protectionLevel = SocketProtectionLevel_Tls10;
+        break;
+    case QSsl::TlsV1_1:
+        protectionLevel = SocketProtectionLevel_Tls11;
+        break;
+    case QSsl::TlsV1_2:
+        protectionLevel = SocketProtectionLevel_Tls12;
+        break;
+    default:
+        protectionLevel = SocketProtectionLevel_Tls12; // default to highest
+        protocol = QSsl::TlsV1_2;
+        break;
+    }
+
+    // Sync custom certificates
+    const QSet<QSslCertificate> caCertificates = configuration.caCertificates.toSet();
+    const QSet<QSslCertificate> newCertificates = caCertificates - previousCaCertificates;
+    const QSet<QSslCertificate> oldCertificates = previousCaCertificates - caCertificates;
+    g->syncCaCertificates(newCertificates, oldCertificates);
+    previousCaCertificates = caCertificates;
+
+    continueHandshake();
+}
+
+void QSslSocketBackendPrivate::startServerEncryption()
+{
+    Q_UNIMPLEMENTED();
+}
+
+void QSslSocketBackendPrivate::transmit()
+{
+    Q_Q(QSslSocket);
+
+    if (connectionEncrypted && !writeBuffer.isEmpty()) {
+        qint64 totalBytesWritten = 0;
+        int nextDataBlockSize;
+        while ((nextDataBlockSize = writeBuffer.nextDataBlockSize()) > 0) {
+            int writtenBytes = plainSocket->write(writeBuffer.readPointer(), nextDataBlockSize);
+            writtenBytes = nextDataBlockSize;
+
+            writeBuffer.free(writtenBytes);
+            totalBytesWritten += writtenBytes;
+
+            if (writtenBytes < nextDataBlockSize)
+                break;
+        }
+
+        if (totalBytesWritten > 0) {
+            // Don't emit bytesWritten() recursively.
+            if (!emittedBytesWritten) {
+                emittedBytesWritten = true;
+                emit q->bytesWritten(totalBytesWritten);
+                emittedBytesWritten = false;
+            }
+        }
+    }
+
+    // Check if we've got any data to be read from the socket.
+    int pendingBytes;
+    bool bytesRead = false;
+    while ((pendingBytes = plainSocket->bytesAvailable()) > 0) {
+        char *ptr = buffer.reserve(pendingBytes);
+        int readBytes = plainSocket->read(ptr, pendingBytes);
+        buffer.chop(pendingBytes - readBytes);
+        bytesRead = true;
+    }
+
+    if (bytesRead) {
+        if (readyReadEmittedPointer)
+            *readyReadEmittedPointer = true;
+        emit q->readyRead();
+    }
+
+    if (pendingClose) {
+        pendingClose = false;
+        q->disconnectFromHost();
+    }
+}
+
+void QSslSocketBackendPrivate::disconnectFromHost()
+{
+    QMetaObject::invokeMethod(connectionHelper.data(), "disconnectSocketFromHost", Qt::QueuedConnection);
+}
+
+void QSslSocketBackendPrivate::disconnected()
+{
+}
+
+QSslCipher QSslSocketBackendPrivate::sessionCipher() const
+{
+    return configuration.sessionCipher;
+}
+
+QSsl::SslProtocol QSslSocketBackendPrivate::sessionProtocol() const
+{
+    return configuration.sessionCipher.protocol();
+}
+
+void QSslSocketBackendPrivate::continueHandshake()
+{
+    Q_Q(QSslSocket);
+
+    IStreamSocket *socket = reinterpret_cast<IStreamSocket *>(plainSocket->socketDescriptor());
+    if (qintptr(socket) == -1) {
+        q->setErrorString(QStringLiteral("At attempt was made to continue the handshake on an invalid socket."));
+        q->setSocketError(QAbstractSocket::SslInternalError);
+        emit q->error(QAbstractSocket::SslInternalError);
+        return;
+    }
+
+    HRESULT hr;
+    ComPtr<IHostName> hostName;
+    const QString host = verificationPeerName.isEmpty() ? plainSocket->peerName()
+                                                        : verificationPeerName;
+    if (host.isEmpty()) {
+        ComPtr<IStreamSocketInformation> info;
+        hr = socket->get_Information(&info);
+        Q_ASSERT_SUCCEEDED(hr);
+        hr = info->get_RemoteAddress(&hostName);
+    } else {
+        HStringReference hostRef(reinterpret_cast<LPCWSTR>(host.utf16()), host.length());
+        hr = g->hostNameFactory->CreateHostName(hostRef.Get(), &hostName);
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+    if (FAILED(hr)) {
+        q->setErrorString(qt_error_string(hr));
+        q->setSocketError(QAbstractSocket::SslInvalidUserDataError);
+        emit q->error(QAbstractSocket::SslInvalidUserDataError);
+        return;
+    }
+
+    ComPtr<IStreamSocketControl> control;
+    hr = socket->get_Control(&control);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    ComPtr<IStreamSocketControl2> control2;
+    hr = control.As(&control2);
+    ComPtr<IVector<ChainValidationResult>> ignoreList;
+    hr = control2->get_IgnorableServerCertificateErrors(&ignoreList);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    QSet<QSslError> ignoreErrors = ignoreErrorsList.toSet();
+    for (int i = ChainValidationResult_Untrusted; i < ChainValidationResult_OtherErrors + 1; ++i) {
+        // Populate the native ignore list - break to add, continue to skip
+        switch (i) {
+        case ChainValidationResult_Revoked:
+        case ChainValidationResult_InvalidSignature:
+        case ChainValidationResult_BasicConstraintsError:
+        case ChainValidationResult_InvalidCertificateAuthorityPolicy:
+        case ChainValidationResult_UnknownCriticalExtension:
+        case ChainValidationResult_OtherErrors:
+            continue; // The above errors can't be ignored in the handshake
+        case ChainValidationResult_Untrusted:
+            if (ignoreAllSslErrors || ignoreErrors.contains(QSslError::CertificateUntrusted))
+                break;
+            continue;
+        case ChainValidationResult_Expired:
+            if (ignoreAllSslErrors || ignoreErrors.contains(QSslError::CertificateExpired))
+                break;
+            continue;
+        case ChainValidationResult_IncompleteChain:
+            if (ignoreAllSslErrors
+                    || ignoreErrors.contains(QSslError::InvalidCaCertificate)
+                    || ignoreErrors.contains(QSslError::UnableToVerifyFirstCertificate)
+                    || ignoreErrors.contains(QSslError::UnableToGetIssuerCertificate)) {
+                break;
+            }
+            continue;
+        case ChainValidationResult_WrongUsage:
+            if (ignoreAllSslErrors || ignoreErrors.contains(QSslError::InvalidPurpose))
+                break;
+            continue;
+        case ChainValidationResult_InvalidName:
+            if (ignoreAllSslErrors
+                    || ignoreErrors.contains(QSslError::HostNameMismatch)
+                    || ignoreErrors.contains(QSslError::SubjectIssuerMismatch)) {
+                break;
+            }
+            continue;
+        case ChainValidationResult_RevocationInformationMissing:
+        case ChainValidationResult_RevocationFailure:
+        default:
+            if (ignoreAllSslErrors)
+                break;
+            continue;
+        }
+        hr = ignoreList->Append(static_cast<ChainValidationResult>(i));
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+
+    ComPtr<IAsyncAction> op;
+    hr = socket->UpgradeToSslAsync(protectionLevel, hostName.Get(), &op);
+    if (FAILED(hr)) {
+        q->setErrorString(QSslSocket::tr("Error creating SSL session: %1")
+                          .arg(qt_error_string(hr)));
+        q->setSocketError(QAbstractSocket::SslInternalError);
+        emit q->error(QAbstractSocket::SslInternalError);
+        return;
+    }
+
+    hr = op->put_Completed(Callback<IAsyncActionCompletedHandler>(
+                               this, &QSslSocketBackendPrivate::onSslUpgrade).Get());
+    Q_ASSERT_SUCCEEDED(hr);
+}
+
+HRESULT QSslSocketBackendPrivate::onSslUpgrade(IAsyncAction *action, AsyncStatus)
+{
+    Q_Q(QSslSocket);
+
+    if (wasDeleted) {
+        qWarning("SSL upgrade callback received after the delegate was deleted. "
+                 "This may be indicative of an internal bug in the WinRT SSL implementation.");
+        return S_OK;
+    }
+
+    HRESULT hr = action->GetResults();
+    QSet<QSslError> errors;
+    switch (hr) {
+    case SEC_E_INVALID_TOKEN: // Occurs when the server doesn't support the requested protocol
+        q->setErrorString(qt_error_string(hr));
+        q->setSocketError(QAbstractSocket::SslHandshakeFailedError);
+        emit q->error(QAbstractSocket::SslHandshakeFailedError);
+        q->disconnectFromHost();
+        return S_OK;
+    default:
+        if (FAILED(hr))
+            qErrnoWarning(hr, "error"); // Unhandled error; let sslErrors take care of it
+        break;
+    }
+
+    IStreamSocket *socket = reinterpret_cast<IStreamSocket *>(plainSocket->socketDescriptor());
+    if (qintptr(socket) == -1) {
+        qWarning("The underlying TCP socket used by the SSL socket is invalid. "
+                 "This may be indicative of an internal bug in the WinRT SSL implementation.");
+        return S_OK;
+    }
+
+    ComPtr<IStreamSocketInformation> info;
+    hr = socket->get_Information(&info);
+    Q_ASSERT_SUCCEEDED(hr);
+    ComPtr<IStreamSocketInformation2> info2;
+    hr = info.As(&info2);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    // Cipher
+    QSsl::SslProtocol protocol;
+    SocketProtectionLevel protectionLevel;
+    hr = info->get_ProtectionLevel(&protectionLevel);
+    switch (protectionLevel) {
+    default:
+        protocol = QSsl::UnknownProtocol;
+        break;
+    case SocketProtectionLevel_Ssl:
+        protocol = QSsl::SslV3;
+        break;
+    case SocketProtectionLevel_Tls10:
+        protocol = QSsl::TlsV1_0;
+        break;
+    case SocketProtectionLevel_Tls11:
+        protocol = QSsl::TlsV1_1;
+        break;
+    case SocketProtectionLevel_Tls12:
+        protocol = QSsl::TlsV1_2;
+        break;
+    }
+    configuration.sessionCipher = QSslCipher(QStringLiteral("WINRT"), protocol); // The actual cipher name is not accessible
+
+    // Certificate & chain
+    ComPtr<ICertificate> certificate;
+    hr = info2->get_ServerCertificate(&certificate);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    QList<QSslCertificate> peerCertificateChain;
+    if (certificate) {
+        ComPtr<IAsyncOperation<CertificateChain *>> op;
+        hr = certificate->BuildChainAsync(Q_NULLPTR, &op);
+        Q_ASSERT_SUCCEEDED(hr);
+        ComPtr<ICertificateChain> certificateChain;
+        hr = QWinRTFunctions::await(op, certificateChain.GetAddressOf());
+        Q_ASSERT_SUCCEEDED(hr);
+
+        ComPtr<IVectorView<Certificate *>> certificates;
+        hr = certificateChain->GetCertificates(true, &certificates);
+        Q_ASSERT_SUCCEEDED(hr);
+        quint32 certificatesLength;
+        hr = certificates->get_Size(&certificatesLength);
+        Q_ASSERT_SUCCEEDED(hr);
+        for (quint32 i = 0; i < certificatesLength; ++i) {
+            ComPtr<ICertificate> chainCertificate;
+            hr = certificates->GetAt(i, &chainCertificate);
+            Q_ASSERT_SUCCEEDED(hr);
+            peerCertificateChain.append(QSslCertificatePrivate::QSslCertificate_from_Certificate(chainCertificate.Get()));
+        }
+    }
+
+    configuration.peerCertificate = certificate ? QSslCertificatePrivate::QSslCertificate_from_Certificate(certificate.Get())
+                                                : QSslCertificate();
+    configuration.peerCertificateChain = peerCertificateChain;
+
+    // Errors
+    ComPtr<IVectorView<ChainValidationResult>> chainValidationResults;
+    hr = info2->get_ServerCertificateErrors(&chainValidationResults);
+    Q_ASSERT_SUCCEEDED(hr);
+    quint32 size;
+    hr = chainValidationResults->get_Size(&size);
+    Q_ASSERT_SUCCEEDED(hr);
+    for (quint32 i = 0; i < size; ++i) {
+        ChainValidationResult result;
+        hr = chainValidationResults->GetAt(i, &result);
+        Q_ASSERT_SUCCEEDED(hr);
+        switch (result) {
+        case ChainValidationResult_Success:
+            break;
+        case ChainValidationResult_Untrusted:
+            errors.insert(QSslError::CertificateUntrusted);
+            break;
+        case ChainValidationResult_Revoked:
+            errors.insert(QSslError::CertificateRevoked);
+            break;
+        case ChainValidationResult_Expired:
+            errors.insert(QSslError::CertificateExpired);
+            break;
+        case ChainValidationResult_IncompleteChain:
+            errors.insert(QSslError::UnableToGetIssuerCertificate);
+            break;
+        case ChainValidationResult_InvalidSignature:
+            errors.insert(QSslError::CertificateSignatureFailed);
+            break;
+        case ChainValidationResult_WrongUsage:
+            errors.insert(QSslError::InvalidPurpose);
+            break;
+        case ChainValidationResult_InvalidName:
+            errors.insert(QSslError::HostNameMismatch);
+            break;
+        case ChainValidationResult_InvalidCertificateAuthorityPolicy:
+            errors.insert(QSslError::InvalidCaCertificate);
+            break;
+        default:
+            errors.insert(QSslError::UnspecifiedError);
+            break;
+        }
+    }
+
+    sslErrors = errors.toList();
+
+    // Peer validation
+    if (!configuration.peerCertificate.isNull()) {
+        const QString peerName = verificationPeerName.isEmpty() ? q->peerName() : verificationPeerName;
+        if (!isMatchingHostname(configuration.peerCertificate, peerName)) {
+            // No matches in common names or alternate names.
+            const QSslError error(QSslError::HostNameMismatch, configuration.peerCertificate);
+            const int index = sslErrors.indexOf(QSslError::HostNameMismatch);
+            if (index >= 0) // Replace the existing error
+                sslErrors[index] = error;
+            else
+                sslErrors.append(error);
+            emit q->peerVerifyError(error);
+        }
+
+    // Peer validation required, but no certificate is present
+    } else if (configuration.peerVerifyMode == QSslSocket::VerifyPeer
+               || configuration.peerVerifyMode == QSslSocket::AutoVerifyPeer) {
+        QSslError error(QSslError::NoPeerCertificate);
+        sslErrors.append(error);
+        emit q->peerVerifyError(error);
+    }
+
+    // Peer chain validation
+    foreach (const QSslCertificate &certificate, peerCertificateChain) {
+        if (!QSslCertificatePrivate::isBlacklisted(certificate))
+            continue;
+
+        QSslError error(QSslError::CertificateBlacklisted, certificate);
+        sslErrors.append(error);
+        emit q->peerVerifyError(error);
+    }
+
+    if (!sslErrors.isEmpty()) {
+        emit q->sslErrors(sslErrors);
+        q->setErrorString(sslErrors.first().errorString());
+        q->setSocketError(QAbstractSocket::SslHandshakeFailedError);
+        emit q->error(QAbstractSocket::SslHandshakeFailedError);
+
+        // Disconnect if there are any non-ignorable errors
+        foreach (const QSslError &error, sslErrors) {
+            if (ignoreErrorsList.contains(error))
+                continue;
+            q->disconnectFromHost();
+            return S_OK;
+        }
+    }
+
+    if (readBufferMaxSize)
+        plainSocket->setReadBufferSize(readBufferMaxSize);
+
+    connectionEncrypted = true;
+    emit q->encrypted();
+
+    if (pendingClose) {
+        pendingClose = false;
+        q->disconnectFromHost();
+    }
+
+    return S_OK;
+}
+
+QList<QSslError> QSslSocketBackendPrivate::verify(QList<QSslCertificate> certificateChain, const QString &hostName)
+{
+    Q_UNIMPLEMENTED();
+    Q_UNUSED(certificateChain)
+    Q_UNUSED(hostName)
+    QList<QSslError> errors;
+
+    return errors;
+}
+
+bool QSslSocketBackendPrivate::importPKCS12(QIODevice *device,
+                         QSslKey *key, QSslCertificate *cert,
+                         QList<QSslCertificate> *caCertificates,
+                         const QByteArray &passPhrase)
+{
+    Q_UNIMPLEMENTED();
+    Q_UNUSED(device)
+    Q_UNUSED(key)
+    Q_UNUSED(cert)
+    Q_UNUSED(caCertificates)
+    Q_UNUSED(passPhrase)
+    return false;
+}
+
+QT_END_NAMESPACE
diff --git a/src/network/ssl/qsslsocket_winrt_p.h b/src/network/ssl/qsslsocket_winrt_p.h
new file mode 100644
index 0000000000..aa31c85d6e
--- /dev/null
+++ b/src/network/ssl/qsslsocket_winrt_p.h
@@ -0,0 +1,111 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtNetwork module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QSSLSOCKET_WINRT_P_H
+#define QSSLSOCKET_WINRT_P_H
+
+//
+//  W A R N I N G
+//  -------------
+//
+// This file is not part of the Qt API.  It exists for the convenience
+// of the QtNetwork library.  This header file may change from
+// version to version without notice, or even be removed.
+//
+// We mean it.
+//
+
+#include "qsslsocket_p.h"
+
+#include <wrl.h>
+#include <windows.networking.sockets.h>
+
+QT_BEGIN_NAMESPACE
+
+class QSslSocketConnectionHelper : public QObject
+{
+    Q_OBJECT
+public:
+    QSslSocketConnectionHelper(QSslSocketBackendPrivate *d)
+        : d(d) { }
+
+    Q_INVOKABLE void disconnectSocketFromHost();
+
+private:
+    QSslSocketBackendPrivate *d;
+};
+
+class QSslSocketBackendPrivate : public QSslSocketPrivate
+{
+    Q_DECLARE_PUBLIC(QSslSocket)
+public:
+    QSslSocketBackendPrivate();
+    ~QSslSocketBackendPrivate();
+
+    // Platform specific functions
+    void startClientEncryption() Q_DECL_OVERRIDE;
+    void startServerEncryption() Q_DECL_OVERRIDE;
+    void transmit() Q_DECL_OVERRIDE;
+    void disconnectFromHost() Q_DECL_OVERRIDE;
+    void disconnected() Q_DECL_OVERRIDE;
+    QSslCipher sessionCipher() const Q_DECL_OVERRIDE;
+    QSsl::SslProtocol sessionProtocol() const Q_DECL_OVERRIDE;
+    void continueHandshake() Q_DECL_OVERRIDE;
+
+    static QList<QSslCipher> defaultCiphers();
+    static QList<QSslError> verify(QList<QSslCertificate> certificateChain, const QString &hostName);
+    static bool importPKCS12(QIODevice *device,
+                             QSslKey *key, QSslCertificate *cert,
+                             QList<QSslCertificate> *caCertificates,
+                             const QByteArray &passPhrase);
+
+private:
+    HRESULT onSslUpgrade(ABI::Windows::Foundation::IAsyncAction *,
+                         ABI::Windows::Foundation::AsyncStatus);
+
+    QScopedPointer<QSslSocketConnectionHelper> connectionHelper;
+    ABI::Windows::Networking::Sockets::SocketProtectionLevel protectionLevel;
+    QSet<QSslCertificate> previousCaCertificates;
+};
+
+QT_END_NAMESPACE
+
+#endif // QSSLSOCKET_WINRT_P_H
diff --git a/src/network/ssl/ssl.pri b/src/network/ssl/ssl.pri
index eb8268515e..384e149241 100644
--- a/src/network/ssl/ssl.pri
+++ b/src/network/ssl/ssl.pri
@@ -1,32 +1,49 @@
 # OpenSSL support; compile in QSslSocket.
-contains(QT_CONFIG, openssl) | contains(QT_CONFIG, openssl-linked) {
-    HEADERS += ssl/qssl.h \
+contains(QT_CONFIG, ssl) | contains(QT_CONFIG, openssl) | contains(QT_CONFIG, openssl-linked) {
+    HEADERS += ssl/qasn1element_p.h \
+               ssl/qssl.h \
                ssl/qsslcertificate.h \
                ssl/qsslcertificate_p.h \
-	       ssl/qsslconfiguration.h \
+               ssl/qsslconfiguration.h \
 	       ssl/qsslconfiguration_p.h \
                ssl/qsslcipher.h \
                ssl/qsslcipher_p.h \
                ssl/qsslerror.h \
                ssl/qsslkey.h \
+               ssl/qsslkey_p.h \
                ssl/qsslsocket.h \
-               ssl/qsslsocket_openssl_p.h \
-               ssl/qsslsocket_openssl_symbols_p.h \
                ssl/qsslsocket_p.h \
                ssl/qsslcertificateextension.h \
-               ssl/qsslcertificateextension_p.h \
-               ssl/qsslcontext_p.h
-    SOURCES += ssl/qssl.cpp \
+               ssl/qsslcertificateextension_p.h
+    SOURCES += ssl/qasn1element.cpp \
+               ssl/qssl.cpp \
                ssl/qsslcertificate.cpp \
-	       ssl/qsslconfiguration.cpp \
+               ssl/qsslconfiguration.cpp \
                ssl/qsslcipher.cpp \
+               ssl/qsslkey_p.cpp \
                ssl/qsslerror.cpp \
-               ssl/qsslkey.cpp \
                ssl/qsslsocket.cpp \
+               ssl/qsslcertificateextension.cpp
+
+    winrt {
+        HEADERS += ssl/qsslsocket_winrt_p.h
+        SOURCES += ssl/qsslcertificate_qt.cpp \
+                   ssl/qsslcertificate_winrt.cpp \
+                   ssl/qsslkey_qt.cpp \
+                   ssl/qsslkey_winrt.cpp \
+                   ssl/qsslsocket_winrt.cpp
+    }
+}
+
+contains(QT_CONFIG, openssl) | contains(QT_CONFIG, openssl-linked) {
+    HEADERS += ssl/qsslcontext_openssl_p.h \
+               ssl/qsslsocket_openssl_p.h \
+               ssl/qsslsocket_openssl_symbols_p.h
+    SOURCES += ssl/qsslcertificate_openssl.cpp \
+               ssl/qsslcontext_openssl.cpp \
+               ssl/qsslkey_openssl.cpp \
                ssl/qsslsocket_openssl.cpp \
-               ssl/qsslsocket_openssl_symbols.cpp \
-               ssl/qsslcertificateextension.cpp \
-               ssl/qsslcontext.cpp
+               ssl/qsslsocket_openssl_symbols.cpp
 
 android:!android-no-sdk: SOURCES += ssl/qsslsocket_openssl_android.cpp
 
diff --git a/src/opengl/gl2paintengineex/qgl2pexvertexarray.cpp b/src/opengl/gl2paintengineex/qgl2pexvertexarray.cpp
index d1f13ab9dd..3325b2de95 100644
--- a/src/opengl/gl2paintengineex/qgl2pexvertexarray.cpp
+++ b/src/opengl/gl2paintengineex/qgl2pexvertexarray.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qgl2pexvertexarray_p.h b/src/opengl/gl2paintengineex/qgl2pexvertexarray_p.h
index f1a664c93d..b28cf1f1b2 100644
--- a/src/opengl/gl2paintengineex/qgl2pexvertexarray_p.h
+++ b/src/opengl/gl2paintengineex/qgl2pexvertexarray_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglcustomshaderstage.cpp b/src/opengl/gl2paintengineex/qglcustomshaderstage.cpp
index 705227bad5..d194ce8ede 100644
--- a/src/opengl/gl2paintengineex/qglcustomshaderstage.cpp
+++ b/src/opengl/gl2paintengineex/qglcustomshaderstage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglcustomshaderstage_p.h b/src/opengl/gl2paintengineex/qglcustomshaderstage_p.h
index 69a6ef2896..cacd3953b3 100644
--- a/src/opengl/gl2paintengineex/qglcustomshaderstage_p.h
+++ b/src/opengl/gl2paintengineex/qglcustomshaderstage_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglengineshadermanager.cpp b/src/opengl/gl2paintengineex/qglengineshadermanager.cpp
index 19e453e783..cc7c839abd 100644
--- a/src/opengl/gl2paintengineex/qglengineshadermanager.cpp
+++ b/src/opengl/gl2paintengineex/qglengineshadermanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglengineshadermanager_p.h b/src/opengl/gl2paintengineex/qglengineshadermanager_p.h
index 166d9a0593..2071b55ef8 100644
--- a/src/opengl/gl2paintengineex/qglengineshadermanager_p.h
+++ b/src/opengl/gl2paintengineex/qglengineshadermanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglengineshadersource_p.h b/src/opengl/gl2paintengineex/qglengineshadersource_p.h
index aad2c1f7db..7e17689883 100644
--- a/src/opengl/gl2paintengineex/qglengineshadersource_p.h
+++ b/src/opengl/gl2paintengineex/qglengineshadersource_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglgradientcache.cpp b/src/opengl/gl2paintengineex/qglgradientcache.cpp
index 6160554472..9065046709 100644
--- a/src/opengl/gl2paintengineex/qglgradientcache.cpp
+++ b/src/opengl/gl2paintengineex/qglgradientcache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -89,11 +81,12 @@ void QGL2GradientCache::freeResource(QOpenGLContext *)
 
 void QGL2GradientCache::cleanCache()
 {
+    QOpenGLFunctions *funcs = QOpenGLContext::currentContext()->functions();
     QMutexLocker lock(&m_mutex);
     QGLGradientColorTableHash::const_iterator it = cache.constBegin();
     for (; it != cache.constEnd(); ++it) {
         const CacheInfo &cache_info = it.value();
-        glDeleteTextures(1, &cache_info.texId);
+        funcs->glDeleteTextures(1, &cache_info.texId);
     }
     cache.clear();
 }
@@ -129,6 +122,7 @@ GLuint QGL2GradientCache::getBuffer(const QGradient &gradient, qreal opacity)
 
 GLuint QGL2GradientCache::addCacheElement(quint64 hash_val, const QGradient &gradient, qreal opacity)
 {
+    QOpenGLFunctions *funcs = QOpenGLContext::currentContext()->functions();
     if (cache.size() == maxCacheSize()) {
         int elem_to_remove = qrand() % maxCacheSize();
         quint64 key = cache.keys()[elem_to_remove];
@@ -136,7 +130,7 @@ GLuint QGL2GradientCache::addCacheElement(quint64 hash_val, const QGradient &gra
         // need to call glDeleteTextures on each removed cache entry:
         QGLGradientColorTableHash::const_iterator it = cache.constFind(key);
         do {
-            glDeleteTextures(1, &it.value().texId);
+            funcs->glDeleteTextures(1, &it.value().texId);
         } while (++it != cache.constEnd() && it.key() == key);
         cache.remove(key); // may remove more than 1, but OK
     }
@@ -144,10 +138,10 @@ GLuint QGL2GradientCache::addCacheElement(quint64 hash_val, const QGradient &gra
     CacheInfo cache_entry(gradient.stops(), opacity, gradient.interpolationMode());
     uint buffer[1024];
     generateGradientColorTable(gradient, buffer, paletteSize(), opacity);
-    glGenTextures(1, &cache_entry.texId);
-    glBindTexture(GL_TEXTURE_2D, cache_entry.texId);
-    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, paletteSize(), 1,
-                    0, GL_RGBA, GL_UNSIGNED_BYTE, buffer);
+    funcs->glGenTextures(1, &cache_entry.texId);
+    funcs->glBindTexture(GL_TEXTURE_2D, cache_entry.texId);
+    funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, paletteSize(), 1,
+                        0, GL_RGBA, GL_UNSIGNED_BYTE, buffer);
     return cache.insert(hash_val, cache_entry).value().texId;
 }
 
diff --git a/src/opengl/gl2paintengineex/qglgradientcache_p.h b/src/opengl/gl2paintengineex/qglgradientcache_p.h
index 9c0c75667e..654b9a20cc 100644
--- a/src/opengl/gl2paintengineex/qglgradientcache_p.h
+++ b/src/opengl/gl2paintengineex/qglgradientcache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglshadercache_meego_p.h b/src/opengl/gl2paintengineex/qglshadercache_meego_p.h
index f3c345f9ac..9d1cb449fb 100644
--- a/src/opengl/gl2paintengineex/qglshadercache_meego_p.h
+++ b/src/opengl/gl2paintengineex/qglshadercache_meego_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qglshadercache_p.h b/src/opengl/gl2paintengineex/qglshadercache_p.h
index 4fbddd4966..ea319e95c9 100644
--- a/src/opengl/gl2paintengineex/qglshadercache_p.h
+++ b/src/opengl/gl2paintengineex/qglshadercache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/gl2paintengineex/qpaintengineex_opengl2.cpp b/src/opengl/gl2paintengineex/qpaintengineex_opengl2.cpp
index 5d4ca42dc2..43df311636 100644
--- a/src/opengl/gl2paintengineex/qpaintengineex_opengl2.cpp
+++ b/src/opengl/gl2paintengineex/qpaintengineex_opengl2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -86,6 +78,10 @@
 
 #include <QDebug>
 
+#ifndef QT_OPENGL_ES_2
+# include <qopenglfunctions_1_1.h>
+#endif
+
 QT_BEGIN_NAMESPACE
 
 
@@ -106,7 +102,7 @@ QGL2PaintEngineExPrivate::~QGL2PaintEngineExPrivate()
     }
 
     if (elementIndicesVBOId != 0) {
-        funcs.glDeleteBuffers(1, &elementIndicesVBOId);
+        glDeleteBuffers(1, &elementIndicesVBOId);
         elementIndicesVBOId = 0;
     }
 }
@@ -193,7 +189,7 @@ void QGL2PaintEngineExPrivate::updateBrushTexture()
         // Get the image data for the pattern
         QImage texImage = qt_imageForBrush(style, false);
 
-        funcs.glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
+        glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
         ctx->d_func()->bindTexture(texImage, GL_TEXTURE_2D, GL_RGBA, QGLContext::InternalBindOption);
         updateTextureFilter(GL_TEXTURE_2D, GL_REPEAT, q->state()->renderHints & QPainter::SmoothPixmapTransform);
     }
@@ -206,7 +202,7 @@ void QGL2PaintEngineExPrivate::updateBrushTexture()
         // for opacity to the cache.
         GLuint texId = QGL2GradientCache::cacheForContext(ctx)->getBuffer(*g, 1.0);
 
-        funcs.glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
+        glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
         glBindTexture(GL_TEXTURE_2D, texId);
 
         if (g->spread() == QGradient::RepeatSpread || g->type() == QGradient::ConicalGradient)
@@ -231,7 +227,7 @@ void QGL2PaintEngineExPrivate::updateBrushTexture()
             wrapMode = GL_CLAMP_TO_EDGE;
         }
 
-        funcs.glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
+        glActiveTexture(GL_TEXTURE0 + QT_BRUSH_TEXTURE_UNIT);
         QGLTexture *tex = ctx->d_func()->bindTexture(currentBrushPixmap, GL_TEXTURE_2D, GL_RGBA,
                                                      QGLContext::InternalBindOption |
                                                      QGLContext::CanFlipNativePixmapBindOption);
@@ -428,9 +424,9 @@ void QGL2PaintEngineExPrivate::updateMatrix()
 
     // Set the PMV matrix attribute. As we use an attributes rather than uniforms, we only
     // need to do this once for every matrix change and persists across all shader programs.
-    funcs.glVertexAttrib3fv(QT_PMV_MATRIX_1_ATTR, pmvMatrix[0]);
-    funcs.glVertexAttrib3fv(QT_PMV_MATRIX_2_ATTR, pmvMatrix[1]);
-    funcs.glVertexAttrib3fv(QT_PMV_MATRIX_3_ATTR, pmvMatrix[2]);
+    glVertexAttrib3fv(QT_PMV_MATRIX_1_ATTR, pmvMatrix[0]);
+    glVertexAttrib3fv(QT_PMV_MATRIX_2_ATTR, pmvMatrix[1]);
+    glVertexAttrib3fv(QT_PMV_MATRIX_3_ATTR, pmvMatrix[2]);
 
     dasher.setInvScale(inverseScale);
     stroker.setInvScale(inverseScale);
@@ -540,11 +536,11 @@ void QGL2PaintEngineEx::beginNativePainting()
 
     d->nativePaintingActive = true;
 
-    d->funcs.glUseProgram(0);
+    d->glUseProgram(0);
 
     // Disable all the vertex attribute arrays:
     for (int i = 0; i < QT_GL_VERTEX_ARRAY_TRACKED_COUNT; ++i)
-        d->funcs.glDisableVertexAttribArray(i);
+        d->glDisableVertexAttribArray(i);
 
 #ifndef QT_OPENGL_ES_2
     if (!d->ctx->contextHandle()->isOpenGLES()) {
@@ -569,12 +565,15 @@ void QGL2PaintEngineEx::beginNativePainting()
 
             const QSize sz = d->device->size();
 
-            glMatrixMode(GL_PROJECTION);
-            glLoadIdentity();
-            glOrtho(0, sz.width(), sz.height(), 0, -999999, 999999);
+            QOpenGLFunctions_1_1 *gl1funcs = QOpenGLContext::currentContext()->versionFunctions<QOpenGLFunctions_1_1>();
+            gl1funcs->initializeOpenGLFunctions();
+
+            gl1funcs->glMatrixMode(GL_PROJECTION);
+            gl1funcs->glLoadIdentity();
+            gl1funcs->glOrtho(0, sz.width(), sz.height(), 0, -999999, 999999);
 
-            glMatrixMode(GL_MODELVIEW);
-            glLoadMatrixf(&mv_matrix[0][0]);
+            gl1funcs->glMatrixMode(GL_MODELVIEW);
+            gl1funcs->glLoadMatrixf(&mv_matrix[0][0]);
         }
     }
 #endif
@@ -591,13 +590,13 @@ void QGL2PaintEngineEx::beginNativePainting()
 void QGL2PaintEngineExPrivate::resetGLState()
 {
     glDisable(GL_BLEND);
-    funcs.glActiveTexture(GL_TEXTURE0);
+    glActiveTexture(GL_TEXTURE0);
     glDisable(GL_STENCIL_TEST);
     glDisable(GL_DEPTH_TEST);
     glDisable(GL_SCISSOR_TEST);
     glDepthMask(true);
     glDepthFunc(GL_LESS);
-    funcs.glClearDepthf(1);
+    glClearDepthf(1);
     glStencilMask(0xff);
     glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP);
     glStencilFunc(GL_ALWAYS, 0, 0xff);
@@ -608,7 +607,7 @@ void QGL2PaintEngineExPrivate::resetGLState()
     if (!ctx->contextHandle()->isOpenGLES()) {
         // gl_Color, corresponding to vertex attribute 3, may have been changed
         float color[] = { 1.0f, 1.0f, 1.0f, 1.0f };
-        funcs.glVertexAttrib4fv(3, color);
+        glVertexAttrib4fv(3, color);
     }
 #endif
 }
@@ -758,7 +757,7 @@ void QGL2PaintEngineExPrivate::fill(const QVectorPath& path)
                     qreal scaleFactor = cache->iscale / inverseScale;
                     if (scaleFactor < 0.5 || scaleFactor > 2.0) {
 #ifdef QT_OPENGL_CACHE_AS_VBOS
-                        funcs.glDeleteBuffers(1, &cache->vbo);
+                        glDeleteBuffers(1, &cache->vbo);
                         cache->vbo = 0;
                         Q_ASSERT(cache->ibo == 0);
 #else
@@ -785,9 +784,9 @@ void QGL2PaintEngineExPrivate::fill(const QVectorPath& path)
                 cache->primitiveType = GL_TRIANGLE_FAN;
                 cache->iscale = inverseScale;
 #ifdef QT_OPENGL_CACHE_AS_VBOS
-                funcs.glGenBuffers(1, &cache->vbo);
-                funcs.glBindBuffer(GL_ARRAY_BUFFER, cache->vbo);
-                funcs.glBufferData(GL_ARRAY_BUFFER, floatSizeInBytes, vertexCoordinateArray.data(), GL_STATIC_DRAW);
+                glGenBuffers(1, &cache->vbo);
+                glBindBuffer(GL_ARRAY_BUFFER, cache->vbo);
+                glBufferData(GL_ARRAY_BUFFER, floatSizeInBytes, vertexCoordinateArray.data(), GL_STATIC_DRAW);
                 cache->ibo = 0;
 #else
                 cache->vertices = (float *) malloc(floatSizeInBytes);
@@ -798,7 +797,7 @@ void QGL2PaintEngineExPrivate::fill(const QVectorPath& path)
 
             prepareForDraw(currentBrush.isOpaque());
 #ifdef QT_OPENGL_CACHE_AS_VBOS
-            funcs.glBindBuffer(GL_ARRAY_BUFFER, cache->vbo);
+            glBindBuffer(GL_ARRAY_BUFFER, cache->vbo);
             setVertexAttributePointer(QT_VERTEX_COORDS_ATTR, 0);
 #else
             setVertexAttributePointer(QT_VERTEX_COORDS_ATTR, cache->vertices);
@@ -1024,9 +1023,9 @@ void QGL2PaintEngineExPrivate::fillStencilWithVertexArray(const float *data,
         }
 
         // Inc. for front-facing triangle
-        funcs.glStencilOpSeparate(GL_FRONT, GL_KEEP, GL_INCR_WRAP, GL_INCR_WRAP);
+        glStencilOpSeparate(GL_FRONT, GL_KEEP, GL_INCR_WRAP, GL_INCR_WRAP);
         // Dec. for back-facing "holes"
-        funcs.glStencilOpSeparate(GL_BACK, GL_KEEP, GL_DECR_WRAP, GL_DECR_WRAP);
+        glStencilOpSeparate(GL_BACK, GL_KEEP, GL_DECR_WRAP, GL_DECR_WRAP);
         glStencilMask(~GL_STENCIL_HIGH_BIT);
         drawVertexArrays(data, stops, stopCount, GL_TRIANGLE_FAN);
 
@@ -1375,9 +1374,9 @@ void QGL2PaintEngineEx::renderHintsChanged()
     if (!d->ctx->contextHandle()->isOpenGLES()) {
         if ((state()->renderHints & QPainter::Antialiasing)
             || (state()->renderHints & QPainter::HighQualityAntialiasing))
-            glEnable(GL_MULTISAMPLE);
+            d->glEnable(GL_MULTISAMPLE);
         else
-            glDisable(GL_MULTISAMPLE);
+            d->glDisable(GL_MULTISAMPLE);
     }
 #endif
 
@@ -1423,7 +1422,7 @@ void QGL2PaintEngineEx::drawPixmap(const QRectF& dest, const QPixmap & pixmap, c
     bindOptions |= QGLContext::TemporarilyCachedBindOption;
 #endif
 
-    d->funcs.glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
+    d->glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
     QGLTexture *texture =
         ctx->d_func()->bindTexture(pixmap, GL_TEXTURE_2D, GL_RGBA, bindOptions);
 
@@ -1465,7 +1464,7 @@ void QGL2PaintEngineEx::drawImage(const QRectF& dest, const QImage& image, const
     ensureActive();
     d->transferMode(ImageDrawingMode);
 
-    d->funcs.glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
+    d->glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
 
     QGLContext::BindOptions bindOptions = QGLContext::InternalBindOption;
 #ifdef QGL_USE_TEXTURE_POOL
@@ -1526,8 +1525,8 @@ bool QGL2PaintEngineEx::drawTexture(const QRectF &dest, GLuint textureId, const
     ensureActive();
     d->transferMode(ImageDrawingMode);
 
-    d->funcs.glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
-    glBindTexture(GL_TEXTURE_2D, textureId);
+    d->glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
+    d->glBindTexture(GL_TEXTURE_2D, textureId);
 
     QGLRect srcRect(src.left(), src.bottom(), src.right(), src.top());
 
@@ -1812,7 +1811,7 @@ void QGL2PaintEngineExPrivate::drawCachedGlyphs(QFontEngine::GlyphFormat glyphFo
 
             glEnable(GL_BLEND);
             glBlendFunc(GL_CONSTANT_COLOR, GL_ONE_MINUS_SRC_COLOR);
-            funcs.glBlendColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
+            glBlendColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
         } else {
             // Other brush styles need two passes.
 
@@ -1829,7 +1828,7 @@ void QGL2PaintEngineExPrivate::drawCachedGlyphs(QFontEngine::GlyphFormat glyphFo
             glEnable(GL_BLEND);
             glBlendFunc(GL_ZERO, GL_ONE_MINUS_SRC_COLOR);
 
-            funcs.glActiveTexture(GL_TEXTURE0 + QT_MASK_TEXTURE_UNIT);
+            glActiveTexture(GL_TEXTURE0 + QT_MASK_TEXTURE_UNIT);
             glBindTexture(GL_TEXTURE_2D, cache->texture());
             updateTextureFilter(GL_TEXTURE_2D, GL_REPEAT, false);
 
@@ -1855,7 +1854,7 @@ void QGL2PaintEngineExPrivate::drawCachedGlyphs(QFontEngine::GlyphFormat glyphFo
         }
         compositionModeDirty = true;
     } else {
-        // Greyscale/mono glyphs
+        // Grayscale/mono glyphs
 
         shaderManager->setMaskType(QGLEngineShaderManager::PixelMask);
         prepareForCachedGlyphDraw(*cache);
@@ -1864,7 +1863,7 @@ void QGL2PaintEngineExPrivate::drawCachedGlyphs(QFontEngine::GlyphFormat glyphFo
     QGLTextureGlyphCache::FilterMode filterMode = (s->matrix.type() > QTransform::TxTranslate)?QGLTextureGlyphCache::Linear:QGLTextureGlyphCache::Nearest;
     if (lastMaskTextureUsed != cache->texture() || cache->filterMode() != filterMode) {
 
-        funcs.glActiveTexture(GL_TEXTURE0 + QT_MASK_TEXTURE_UNIT);
+        glActiveTexture(GL_TEXTURE0 + QT_MASK_TEXTURE_UNIT);
         if (lastMaskTextureUsed != cache->texture()) {
             glBindTexture(GL_TEXTURE_2D, cache->texture());
             lastMaskTextureUsed = cache->texture();
@@ -1965,7 +1964,7 @@ void QGL2PaintEngineExPrivate::drawPixmapFragments(const QPainter::PixmapFragmen
         allOpaque &= (opacity >= 0.99f);
     }
 
-    funcs.glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
+    glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
     QGLTexture *texture = ctx->d_func()->bindTexture(pixmap, GL_TEXTURE_2D, GL_RGBA,
                                                      QGLContext::InternalBindOption
                                                      | QGLContext::CanFlipNativePixmapBindOption);
@@ -2039,17 +2038,17 @@ bool QGL2PaintEngineEx::begin(QPaintDevice *pdev)
     // go after beginPaint:
     d->device->beginPaint();
 
-    d->funcs.initializeOpenGLFunctions();
+    d->initializeOpenGLFunctions();
 
     d->shaderManager = new QGLEngineShaderManager(d->ctx);
 
-    glDisable(GL_STENCIL_TEST);
-    glDisable(GL_DEPTH_TEST);
-    glDisable(GL_SCISSOR_TEST);
+    d->glDisable(GL_STENCIL_TEST);
+    d->glDisable(GL_DEPTH_TEST);
+    d->glDisable(GL_SCISSOR_TEST);
 
 #if !defined(QT_OPENGL_ES_2)
     if (!d->ctx->contextHandle()->isOpenGLES())
-        glDisable(GL_MULTISAMPLE);
+        d->glDisable(GL_MULTISAMPLE);
 #endif
 
     d->glyphCacheFormat = QFontEngine::Format_A8;
@@ -2075,7 +2074,7 @@ bool QGL2PaintEngineEx::end()
     Q_D(QGL2PaintEngineEx);
 
     QGLContext *ctx = d->ctx;
-    d->funcs.glUseProgram(0);
+    d->glUseProgram(0);
     d->transferMode(BrushDrawingMode);
     d->device->endPaint();
 
@@ -2089,11 +2088,11 @@ bool QGL2PaintEngineEx::end()
 
 #ifdef QT_OPENGL_CACHE_AS_VBOS
     if (!d->unusedVBOSToClean.isEmpty()) {
-        glDeleteBuffers(d->unusedVBOSToClean.size(), d->unusedVBOSToClean.constData());
+        d->glDeleteBuffers(d->unusedVBOSToClean.size(), d->unusedVBOSToClean.constData());
         d->unusedVBOSToClean.clear();
     }
     if (!d->unusedIBOSToClean.isEmpty()) {
-        glDeleteBuffers(d->unusedIBOSToClean.size(), d->unusedIBOSToClean.constData());
+        d->glDeleteBuffers(d->unusedIBOSToClean.size(), d->unusedIBOSToClean.constData());
         d->unusedIBOSToClean.clear();
     }
 #endif
@@ -2115,7 +2114,7 @@ void QGL2PaintEngineEx::ensureActive()
 
     if (d->needsSync) {
         d->transferMode(BrushDrawingMode);
-        glViewport(0, 0, d->width, d->height);
+        d->glViewport(0, 0, d->width, d->height);
         d->needsSync = false;
         d->lastMaskTextureUsed = 0;
         d->shaderManager->setDirty();
@@ -2436,7 +2435,7 @@ void QGL2PaintEngineEx::setState(QPainterState *new_state)
     if (old_state == s || old_state->clipChanged) {
         if (old_state && old_state != s && old_state->canRestoreClip) {
             d->updateClipScissorTest();
-            glDepthFunc(GL_LEQUAL);
+            d->glDepthFunc(GL_LEQUAL);
         } else {
             d->regenerateClip();
         }
diff --git a/src/opengl/gl2paintengineex/qpaintengineex_opengl2_p.h b/src/opengl/gl2paintengineex/qpaintengineex_opengl2_p.h
index 15ed5bc57d..528bfdeeb9 100644
--- a/src/opengl/gl2paintengineex/qpaintengineex_opengl2_p.h
+++ b/src/opengl/gl2paintengineex/qpaintengineex_opengl2_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -165,7 +157,7 @@ private:
     Q_DISABLE_COPY(QGL2PaintEngineEx)
 };
 
-class QGL2PaintEngineExPrivate : public QPaintEngineExPrivate
+class QGL2PaintEngineExPrivate : public QPaintEngineExPrivate, protected QOpenGLExtensions
 {
     Q_DECLARE_PUBLIC(QGL2PaintEngineEx)
 public:
@@ -261,8 +253,6 @@ public:
     EngineMode mode;
     QFontEngine::GlyphFormat glyphCacheFormat;
 
-    QOpenGLExtensions funcs;
-
     // Dirty flags
     bool matrixDirty; // Implies matrix uniforms are also dirty
     bool compositionModeDirty;
@@ -327,9 +317,9 @@ void QGL2PaintEngineExPrivate::setVertexAttributePointer(unsigned int arrayIndex
 
     vertexAttribPointers[arrayIndex] = pointer;
     if (arrayIndex == QT_OPACITY_ATTR)
-        funcs.glVertexAttribPointer(arrayIndex, 1, GL_FLOAT, GL_FALSE, 0, pointer);
+        glVertexAttribPointer(arrayIndex, 1, GL_FLOAT, GL_FALSE, 0, pointer);
     else
-        funcs.glVertexAttribPointer(arrayIndex, 2, GL_FLOAT, GL_FALSE, 0, pointer);
+        glVertexAttribPointer(arrayIndex, 2, GL_FLOAT, GL_FALSE, 0, pointer);
 }
 
 QT_END_NAMESPACE
diff --git a/src/opengl/gl2paintengineex/qtextureglyphcache_gl.cpp b/src/opengl/gl2paintengineex/qtextureglyphcache_gl.cpp
index f1da50a6b9..211fad267f 100644
--- a/src/opengl/gl2paintengineex/qtextureglyphcache_gl.cpp
+++ b/src/opengl/gl2paintengineex/qtextureglyphcache_gl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -96,6 +88,7 @@ void QGLTextureGlyphCache::createTextureData(int width, int height)
         qWarning("QGLTextureGlyphCache::createTextureData: Called with no context");
         return;
     }
+    QOpenGLFunctions *funcs = ctx->contextHandle()->functions();
 
     // create in QImageTextureGlyphCache baseclass is meant to be called
     // only to create the initial image and does not preserve the content,
@@ -117,8 +110,8 @@ void QGLTextureGlyphCache::createTextureData(int width, int height)
     if (!m_textureResource)
         m_textureResource = new QGLGlyphTexture(ctx);
 
-    glGenTextures(1, &m_textureResource->m_texture);
-    glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
+    funcs->glGenTextures(1, &m_textureResource->m_texture);
+    funcs->glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
 
     m_textureResource->m_width = width;
     m_textureResource->m_height = height;
@@ -127,18 +120,18 @@ void QGLTextureGlyphCache::createTextureData(int width, int height)
         QVarLengthArray<uchar> data(width * height * 4);
         for (int i = 0; i < data.size(); ++i)
             data[i] = 0;
-        glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, &data[0]);
+        funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, &data[0]);
     } else {
         QVarLengthArray<uchar> data(width * height);
         for (int i = 0; i < data.size(); ++i)
             data[i] = 0;
-        glTexImage2D(GL_TEXTURE_2D, 0, GL_ALPHA, width, height, 0, GL_ALPHA, GL_UNSIGNED_BYTE, &data[0]);
+        funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_ALPHA, width, height, 0, GL_ALPHA, GL_UNSIGNED_BYTE, &data[0]);
     }
 
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
     m_filterMode = Nearest;
 }
 
@@ -149,6 +142,7 @@ void QGLTextureGlyphCache::resizeTextureData(int width, int height)
         qWarning("QGLTextureGlyphCache::resizeTextureData: Called with no context");
         return;
     }
+    QOpenGLFunctions *funcs = ctx->contextHandle()->functions();
 
     int oldWidth = m_textureResource->m_width;
     int oldHeight = m_textureResource->m_height;
@@ -165,44 +159,42 @@ void QGLTextureGlyphCache::resizeTextureData(int width, int height)
     if (!QGLFramebufferObject::hasOpenGLFramebufferObjects() || ctx->d_ptr->workaround_brokenFBOReadBack) {
         QImageTextureGlyphCache::resizeTextureData(width, height);
         Q_ASSERT(image().depth() == 8);
-        glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, width, oldHeight, GL_ALPHA, GL_UNSIGNED_BYTE, image().constBits());
-        glDeleteTextures(1, &oldTexture);
+        funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, width, oldHeight, GL_ALPHA, GL_UNSIGNED_BYTE, image().constBits());
+        funcs->glDeleteTextures(1, &oldTexture);
         return;
     }
 
-    QOpenGLFunctions *funcs = ctx->contextHandle()->functions();
-
     // ### the QTextureGlyphCache API needs to be reworked to allow
     // ### resizeTextureData to fail
 
     funcs->glBindFramebuffer(GL_FRAMEBUFFER, m_textureResource->m_fbo);
 
     GLuint tmp_texture;
-    glGenTextures(1, &tmp_texture);
-    glBindTexture(GL_TEXTURE_2D, tmp_texture);
-    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, oldWidth, oldHeight, 0,
-                 GL_RGBA, GL_UNSIGNED_BYTE, NULL);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
+    funcs->glGenTextures(1, &tmp_texture);
+    funcs->glBindTexture(GL_TEXTURE_2D, tmp_texture);
+    funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, oldWidth, oldHeight, 0,
+                        GL_RGBA, GL_UNSIGNED_BYTE, NULL);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
     m_filterMode = Nearest;
-    glBindTexture(GL_TEXTURE_2D, 0);
+    funcs->glBindTexture(GL_TEXTURE_2D, 0);
     funcs->glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
                                   GL_TEXTURE_2D, tmp_texture, 0);
 
     funcs->glActiveTexture(GL_TEXTURE0 + QT_IMAGE_TEXTURE_UNIT);
-    glBindTexture(GL_TEXTURE_2D, oldTexture);
+    funcs->glBindTexture(GL_TEXTURE_2D, oldTexture);
 
     if (pex != 0)
         pex->transferMode(BrushDrawingMode);
 
-    glDisable(GL_STENCIL_TEST);
-    glDisable(GL_DEPTH_TEST);
-    glDisable(GL_SCISSOR_TEST);
-    glDisable(GL_BLEND);
+    funcs->glDisable(GL_STENCIL_TEST);
+    funcs->glDisable(GL_DEPTH_TEST);
+    funcs->glDisable(GL_SCISSOR_TEST);
+    funcs->glDisable(GL_BLEND);
 
-    glViewport(0, 0, oldWidth, oldHeight);
+    funcs->glViewport(0, 0, oldWidth, oldHeight);
 
     QGLShaderProgram *blitProgram = 0;
     if (pex == 0) {
@@ -257,21 +249,21 @@ void QGLTextureGlyphCache::resizeTextureData(int width, int height)
 
     blitProgram->setUniformValue("imageTexture", QT_IMAGE_TEXTURE_UNIT);
 
-    glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
+    funcs->glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
 
-    glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
+    funcs->glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
 
-    glCopyTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, 0, 0, oldWidth, oldHeight);
+    funcs->glCopyTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, 0, 0, oldWidth, oldHeight);
 
     funcs->glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
                                      GL_RENDERBUFFER, 0);
-    glDeleteTextures(1, &tmp_texture);
-    glDeleteTextures(1, &oldTexture);
+    funcs->glDeleteTextures(1, &tmp_texture);
+    funcs->glDeleteTextures(1, &oldTexture);
 
     funcs->glBindFramebuffer(GL_FRAMEBUFFER, ctx->d_ptr->current_fbo);
 
     if (pex != 0) {
-        glViewport(0, 0, pex->width, pex->height);
+        funcs->glViewport(0, 0, pex->width, pex->height);
         pex->updateClipScissorTest();
     }
 }
@@ -283,16 +275,17 @@ void QGLTextureGlyphCache::fillTexture(const Coord &c, glyph_t glyph, QFixed sub
         qWarning("QGLTextureGlyphCache::fillTexture: Called with no context");
         return;
     }
+    QOpenGLFunctions *funcs = ctx->contextHandle()->functions();
 
     if (!QGLFramebufferObject::hasOpenGLFramebufferObjects() || ctx->d_ptr->workaround_brokenFBOReadBack) {
         QImageTextureGlyphCache::fillTexture(c, glyph, subPixelPosition);
 
-        glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
+        funcs->glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
         const QImage &texture = image();
         const uchar *bits = texture.constBits();
         bits += c.y * texture.bytesPerLine() + c.x;
         for (int i=0; i<c.h; ++i) {
-            glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y + i, c.w, 1, GL_ALPHA, GL_UNSIGNED_BYTE, bits);
+            funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y + i, c.w, 1, GL_ALPHA, GL_UNSIGNED_BYTE, bits);
             bits += texture.bytesPerLine();
         }
         return;
@@ -329,14 +322,14 @@ void QGLTextureGlyphCache::fillTexture(const Coord &c, glyph_t glyph, QFixed sub
         }
     }
 
-    glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
+    funcs->glBindTexture(GL_TEXTURE_2D, m_textureResource->m_texture);
     if (mask.format() == QImage::Format_RGB32) {
         GLenum format = GL_RGBA;
 #if !defined(QT_OPENGL_ES_2)
         if (!ctx->contextHandle()->isOpenGLES())
             format = GL_BGRA;
 #endif
-        glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y, maskWidth, maskHeight, format, GL_UNSIGNED_BYTE, mask.bits());
+        funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y, maskWidth, maskHeight, format, GL_UNSIGNED_BYTE, mask.bits());
     } else {
         // glTexSubImage2D() might cause some garbage to appear in the texture if the mask width is
         // not a multiple of four bytes. The bug appeared on a computer with 32-bit Windows Vista
@@ -349,16 +342,16 @@ void QGLTextureGlyphCache::fillTexture(const Coord &c, glyph_t glyph, QFixed sub
 
         if (!ctx->d_ptr->workaround_brokenAlphaTexSubImage_init) {
             // don't know which driver versions exhibit this bug, so be conservative for now
-            const QByteArray vendorString(reinterpret_cast<const char*>(glGetString(GL_VENDOR)));
+            const QByteArray vendorString(reinterpret_cast<const char*>(funcs->glGetString(GL_VENDOR)));
             ctx->d_ptr->workaround_brokenAlphaTexSubImage = vendorString.indexOf("NVIDIA") >= 0;
             ctx->d_ptr->workaround_brokenAlphaTexSubImage_init = true;
         }
 
         if (ctx->d_ptr->workaround_brokenAlphaTexSubImage) {
             for (int i = 0; i < maskHeight; ++i)
-                glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y + i, maskWidth, 1, GL_ALPHA, GL_UNSIGNED_BYTE, mask.scanLine(i));
+                funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y + i, maskWidth, 1, GL_ALPHA, GL_UNSIGNED_BYTE, mask.scanLine(i));
         } else {
-            glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y, maskWidth, maskHeight, GL_ALPHA, GL_UNSIGNED_BYTE, mask.bits());
+            funcs->glTexSubImage2D(GL_TEXTURE_2D, 0, c.x, c.y, maskWidth, maskHeight, GL_ALPHA, GL_UNSIGNED_BYTE, mask.bits());
         }
     }
 }
diff --git a/src/opengl/gl2paintengineex/qtextureglyphcache_gl_p.h b/src/opengl/gl2paintengineex/qtextureglyphcache_gl_p.h
index 5ffbea8708..fe6f777af5 100644
--- a/src/opengl/gl2paintengineex/qtextureglyphcache_gl_p.h
+++ b/src/opengl/gl2paintengineex/qtextureglyphcache_gl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -92,7 +84,7 @@ struct QGLGlyphTexture : public QOpenGLSharedResource
         if (ctx && m_fbo)
             ctx->contextHandle()->functions()->glDeleteFramebuffers(1, &m_fbo);
         if (m_width || m_height)
-            glDeleteTextures(1, &m_texture);
+            ctx->contextHandle()->functions()->glDeleteTextures(1, &m_texture);
     }
 
     void invalidateResource()
diff --git a/src/opengl/opengl.pro b/src/opengl/opengl.pro
index 5cd553a5e8..9c62d41d3e 100644
--- a/src/opengl/opengl.pro
+++ b/src/opengl/opengl.pro
@@ -12,7 +12,6 @@ load(qt_module)
 
 contains(QT_CONFIG, opengl):CONFIG += opengl
 contains(QT_CONFIG, opengles2):CONFIG += opengles2
-contains(QT_CONFIG, egl):CONFIG += egl
 
 HEADERS += qgl.h \
            qgl_p.h \
@@ -54,5 +53,3 @@ SOURCES +=  qglshaderprogram.cpp \
             gl2paintengineex/qpaintengineex_opengl2.cpp \
             gl2paintengineex/qglcustomshaderstage.cpp \
             gl2paintengineex/qtextureglyphcache_gl.cpp
-
-SOURCES +=  qgl_qpa.cpp
diff --git a/src/opengl/qgl.cpp b/src/opengl/qgl.cpp
index 02ea6e45e3..1e49d95087 100644
--- a/src/opengl/qgl.cpp
+++ b/src/opengl/qgl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,15 @@
 #include "qlibrary.h"
 #include <qmutex.h>
 
+#include "qsurfaceformat.h"
+#include <private/qapplication_p.h>
+#include <qpa/qplatformopenglcontext.h>
+#include <qpa/qplatformwindow.h>
+
+#ifndef QT_OPENGL_ES_2
+#include <qopenglfunctions_1_1.h>
+#endif
+
 // #define QT_GL_CONTEXT_RESOURCE_DEBUG
 
 QT_BEGIN_NAMESPACE
@@ -107,6 +108,7 @@ bool qgl_hasExtension(QOpenGLExtensions::OpenGLExtension extension)
 }
 
 QOpenGLExtensions::OpenGLExtensions extensions;
+
 /*
     Returns the GL extensions for the current QOpenGLContext. If there is no
     current QOpenGLContext, a default context will be created and the extensions
@@ -121,6 +123,20 @@ QOpenGLExtensions* qgl_extensions()
     return 0;
 }
 
+QOpenGLFunctions *qgl_functions()
+{
+    return qgl_extensions(); // QOpenGLExtensions is just a subclass of QOpenGLFunctions
+}
+
+#ifndef QT_OPENGL_ES_2
+QOpenGLFunctions_1_1 *qgl1_functions()
+{
+    QOpenGLFunctions_1_1 *f = QOpenGLContext::currentContext()->versionFunctions<QOpenGLFunctions_1_1>();
+    f->initializeOpenGLFunctions();
+    return f;
+}
+#endif
+
 struct QGLThreadContext {
     ~QGLThreadContext() {
         if (context)
@@ -195,8 +211,6 @@ QGLSignalProxy *QGLSignalProxy::instance()
     \value NoDeprecatedFunctions    Disables the use of deprecated functionality for OpenGL 3.x
                                     contexts. A context with deprecated functionality disabled is
                                     called a forward compatible context in the OpenGL specification.
-
-    \sa {Sample Buffers Example}
 */
 
 /*****************************************************************************
@@ -207,6 +221,7 @@ QGLSignalProxy *QGLSignalProxy::instance()
 /*!
     \class QGLFormat
     \inmodule QtOpenGL
+    \obsolete
 
     \brief The QGLFormat class specifies the display format of an OpenGL
     rendering context.
@@ -420,6 +435,82 @@ QGLFormat::~QGLFormat()
 }
 
 /*!
+    Returns an OpenGL format for the window format specified by \a format.
+*/
+QGLFormat QGLFormat::fromSurfaceFormat(const QSurfaceFormat &format)
+{
+    QGLFormat retFormat;
+    if (format.alphaBufferSize() >= 0)
+        retFormat.setAlphaBufferSize(format.alphaBufferSize());
+    if (format.blueBufferSize() >= 0)
+        retFormat.setBlueBufferSize(format.blueBufferSize());
+    if (format.greenBufferSize() >= 0)
+        retFormat.setGreenBufferSize(format.greenBufferSize());
+    if (format.redBufferSize() >= 0)
+        retFormat.setRedBufferSize(format.redBufferSize());
+    if (format.depthBufferSize() >= 0)
+        retFormat.setDepthBufferSize(format.depthBufferSize());
+    if (format.samples() > 1) {
+        retFormat.setSampleBuffers(true);
+        retFormat.setSamples(format.samples());
+    }
+    if (format.stencilBufferSize() > 0) {
+        retFormat.setStencil(true);
+        retFormat.setStencilBufferSize(format.stencilBufferSize());
+    }
+    retFormat.setSwapInterval(format.swapInterval());
+    retFormat.setDoubleBuffer(format.swapBehavior() != QSurfaceFormat::SingleBuffer);
+    retFormat.setStereo(format.stereo());
+    retFormat.setVersion(format.majorVersion(), format.minorVersion());
+    retFormat.setProfile(static_cast<QGLFormat::OpenGLContextProfile>(format.profile()));
+    return retFormat;
+}
+
+/*!
+    Returns a window format for the OpenGL format specified by \a format.
+*/
+QSurfaceFormat QGLFormat::toSurfaceFormat(const QGLFormat &format)
+{
+    QSurfaceFormat retFormat;
+    if (format.alpha())
+        retFormat.setAlphaBufferSize(format.alphaBufferSize() == -1 ? 1 : format.alphaBufferSize());
+    if (format.blueBufferSize() >= 0)
+        retFormat.setBlueBufferSize(format.blueBufferSize());
+    if (format.greenBufferSize() >= 0)
+        retFormat.setGreenBufferSize(format.greenBufferSize());
+    if (format.redBufferSize() >= 0)
+        retFormat.setRedBufferSize(format.redBufferSize());
+    if (format.depth())
+        retFormat.setDepthBufferSize(format.depthBufferSize() == -1 ? 1 : format.depthBufferSize());
+    retFormat.setSwapBehavior(format.doubleBuffer() ? QSurfaceFormat::DoubleBuffer : QSurfaceFormat::SingleBuffer);
+    if (format.sampleBuffers())
+        retFormat.setSamples(format.samples() == -1 ? 4 : format.samples());
+    if (format.stencil())
+        retFormat.setStencilBufferSize(format.stencilBufferSize() == -1 ? 1 : format.stencilBufferSize());
+    retFormat.setSwapInterval(format.swapInterval());
+    retFormat.setStereo(format.stereo());
+    retFormat.setMajorVersion(format.majorVersion());
+    retFormat.setMinorVersion(format.minorVersion());
+    retFormat.setProfile(static_cast<QSurfaceFormat::OpenGLContextProfile>(format.profile()));
+    // QGLFormat has no way to set DeprecatedFunctions, that is, to tell that forward
+    // compatibility should not be requested. Some drivers fail to ignore the fwdcompat
+    // bit with compatibility profiles so make sure it is not set.
+    if (format.profile() == QGLFormat::CompatibilityProfile)
+        retFormat.setOption(QSurfaceFormat::DeprecatedFunctions);
+    return retFormat;
+}
+
+void QGLContextPrivate::setupSharing() {
+    Q_Q(QGLContext);
+    QOpenGLContext *sharedContext = guiGlContext->shareContext();
+    if (sharedContext) {
+        QGLContext *actualSharedContext = QGLContext::fromOpenGLContext(sharedContext);
+        sharing = true;
+        QGLContextGroup::addShare(q, actualSharedContext);
+    }
+}
+
+/*!
     \fn bool QGLFormat::doubleBuffer() const
 
     Returns \c true if double buffering is enabled; otherwise returns
@@ -1113,8 +1204,11 @@ QGLFormat::OpenGLContextProfile QGLFormat::profile() const
     \warning This function must not be called until the QApplication
     object has been created.
 */
-
-
+bool QGLFormat::hasOpenGL()
+{
+    return QApplicationPrivate::platformIntegration()
+            ->hasCapability(QPlatformIntegration::OpenGL);
+}
 
 /*!
     \fn bool QGLFormat::hasOpenGLOverlays()
@@ -1125,6 +1219,10 @@ QGLFormat::OpenGLContextProfile QGLFormat::profile() const
     \warning This function must not be called until the QApplication
     object has been created.
 */
+bool QGLFormat::hasOpenGLOverlays()
+{
+    return false;
+}
 
 QGLFormat::OpenGLVersionFlags Q_AUTOTEST_EXPORT qOpenGLVersionFlagsFromString(const QString &versionString)
 {
@@ -1355,7 +1453,7 @@ QGLFormat::OpenGLVersionFlags QGLFormat::openGLVersionFlags()
         }
     }
 
-    QString versionString(QLatin1String(reinterpret_cast<const char*>(glGetString(GL_VERSION))));
+    QString versionString(QLatin1String(reinterpret_cast<const char*>(qgl_functions()->glGetString(GL_VERSION))));
     OpenGLVersionFlags versionFlags = qOpenGLVersionFlagsFromString(versionString);
     if (currentCtx) {
         currentCtx->d_func()->version_flags_cached = true;
@@ -1631,6 +1729,60 @@ void QGLContextPrivate::init(QPaintDevice *dev, const QGLFormat &format)
 QGLContext* QGLContext::currentCtx = 0;
 
 /*
+    QGLTemporaryContext implementation
+*/
+class QGLTemporaryContextPrivate
+{
+public:
+    QWindow *window;
+    QOpenGLContext *context;
+
+    QGLContext *oldContext;
+};
+
+QGLTemporaryContext::QGLTemporaryContext(bool, QWidget *)
+    : d(new QGLTemporaryContextPrivate)
+{
+    d->oldContext = const_cast<QGLContext *>(QGLContext::currentContext());
+
+    d->window = new QWindow;
+    d->window->setSurfaceType(QWindow::OpenGLSurface);
+    d->window->setGeometry(QRect(0, 0, 3, 3));
+    d->window->create();
+
+    d->context = new QOpenGLContext;
+#if !defined(QT_OPENGL_ES)
+    if (QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGL) {
+        // On desktop, request latest released version
+        QSurfaceFormat format;
+#if defined(Q_OS_MAC)
+        // OS X is limited to OpenGL 3.2 Core Profile at present
+        // so set that here. If we use compatibility profile it
+        // only reports 2.x contexts.
+        format.setMajorVersion(3);
+        format.setMinorVersion(2);
+        format.setProfile(QSurfaceFormat::CoreProfile);
+#else
+        format.setMajorVersion(4);
+        format.setMinorVersion(3);
+#endif
+        d->context->setFormat(format);
+    }
+#endif // QT_OPENGL_ES
+    d->context->create();
+    d->context->makeCurrent(d->window);
+}
+
+QGLTemporaryContext::~QGLTemporaryContext()
+{
+    if (d->oldContext)
+        d->oldContext->makeCurrent();
+
+    delete d->context;
+    delete d->window;
+}
+
+/*
    Read back the contents of the currently bound framebuffer, used in
    QGLWidget::grabFrameBuffer(), QGLPixelbuffer::toImage() and
    QGLFramebufferObject::toImage()
@@ -1687,7 +1839,7 @@ QImage qt_gl_read_frame_buffer(const QSize &size, bool alpha_format, bool includ
         return QImage();
     int w = size.width();
     int h = size.height();
-    glReadPixels(0, 0, w, h, GL_RGBA, GL_UNSIGNED_BYTE, img.bits());
+    qgl_functions()->glReadPixels(0, 0, w, h, GL_RGBA, GL_UNSIGNED_BYTE, img.bits());
     convertFromGLImage(img, w, h, alpha_format, include_alpha);
     return img;
 }
@@ -1701,28 +1853,14 @@ QImage qt_gl_read_texture(const QSize &size, bool alpha_format, bool include_alp
     int h = size.height();
 #ifndef QT_OPENGL_ES
     if (!QOpenGLContext::currentContext()->isOpenGLES()) {
-        //### glGetTexImage not in GL ES 2.0, need to do something else here!
-        glGetTexImage(GL_TEXTURE_2D, 0, GL_RGBA, GL_UNSIGNED_BYTE, img.bits());
+
+        qgl1_functions()->glGetTexImage(GL_TEXTURE_2D, 0, GL_RGBA, GL_UNSIGNED_BYTE, img.bits());
     }
 #endif // QT_OPENGL_ES
     convertFromGLImage(img, w, h, alpha_format, include_alpha);
     return img;
 }
 
-// returns the highest number closest to v, which is a power of 2
-// NB! assumes 32 bit ints
-int qt_next_power_of_two(int v)
-{
-    v--;
-    v |= v >> 1;
-    v |= v >> 2;
-    v |= v >> 4;
-    v |= v >> 8;
-    v |= v >> 16;
-    ++v;
-    return v;
-}
-
 Q_GLOBAL_STATIC(QGLTextureCache, qt_gl_texture_cache)
 
 QGLTextureCache::QGLTextureCache()
@@ -1861,6 +1999,7 @@ struct DDSFormat {
 /*!
     \class QGLContext
     \inmodule QtOpenGL
+    \obsolete
 
     \brief The QGLContext class encapsulates an OpenGL rendering context.
 
@@ -1981,6 +2120,47 @@ QGLContext::QGLContext(const QGLFormat &format)
     d->init(0, format);
 }
 
+static void qDeleteQGLContext(void *handle)
+{
+    QGLContext *context = static_cast<QGLContext *>(handle);
+    delete context;
+}
+
+QGLContext::QGLContext(QOpenGLContext *context)
+    : d_ptr(new QGLContextPrivate(this))
+{
+    Q_D(QGLContext);
+    d->init(0, QGLFormat::fromSurfaceFormat(context->format()));
+    d->guiGlContext = context;
+    d->guiGlContext->setQGLContextHandle(this, qDeleteQGLContext);
+    d->ownContext = false;
+    d->valid = context->isValid();
+    d->setupSharing();
+}
+
+QOpenGLContext *QGLContext::contextHandle() const
+{
+    Q_D(const QGLContext);
+    return d->guiGlContext;
+}
+
+/*!
+    Returns a OpenGL context for the window context specified by the \a context
+    parameter.
+*/
+QGLContext *QGLContext::fromOpenGLContext(QOpenGLContext *context)
+{
+    if (!context)
+        return 0;
+    if (context->qGLContextHandle()) {
+        return reinterpret_cast<QGLContext *>(context->qGLContextHandle());
+    }
+    QGLContext *glContext = new QGLContext(context);
+    //Don't call create on context. This can cause the platformFormat to be set on the widget, which
+    //will cause the platformWindow to be recreated.
+    return glContext;
+}
+
 /*!
     Destroys the OpenGL context and frees its resources.
 */
@@ -2193,7 +2373,7 @@ QGLTexture *QGLContextPrivate::bindTexture(const QImage &image, GLenum target, G
             q->deleteTexture(texture->id);
             texture = 0;
         } else {
-            glBindTexture(target, texture->id);
+            qgl_functions()->glBindTexture(target, texture->id);
             return texture;
         }
     }
@@ -2245,6 +2425,7 @@ QGLTexture* QGLContextPrivate::bindTexture(const QImage &image, GLenum target, G
                                            const qint64 key, QGLContext::BindOptions options)
 {
     Q_Q(QGLContext);
+    QOpenGLFunctions *funcs = qgl_functions();
 
 #ifdef QGL_BIND_TEXTURE_DEBUG
     printf("QGLContextPrivate::bindTexture(), imageSize=(%d,%d), internalFormat =0x%x, options=%x, key=%llx\n",
@@ -2255,14 +2436,14 @@ QGLTexture* QGLContextPrivate::bindTexture(const QImage &image, GLenum target, G
 
 #ifndef QT_NO_DEBUG
     // Reset the gl error stack...git
-    while (glGetError() != GL_NO_ERROR) ;
+    while (funcs->glGetError() != GL_NO_ERROR) ;
 #endif
 
     // Scale the pixmap if needed. GL textures needs to have the
     // dimensions 2^n+2(border) x 2^m+2(border), unless we're using GL
     // 2.0 or use the GL_TEXTURE_RECTANGLE texture target
-    int tx_w = qt_next_power_of_two(image.width());
-    int tx_h = qt_next_power_of_two(image.height());
+    int tx_w = qNextPowerOfTwo(image.width() - 1);
+    int tx_h = qNextPowerOfTwo(image.height() - 1);
 
     QImage img = image;
 
@@ -2280,9 +2461,9 @@ QGLTexture* QGLContextPrivate::bindTexture(const QImage &image, GLenum target, G
     GLuint filtering = options & QGLContext::LinearFilteringBindOption ? GL_LINEAR : GL_NEAREST;
 
     GLuint tx_id;
-    glGenTextures(1, &tx_id);
-    glBindTexture(target, tx_id);
-    glTexParameteri(target, GL_TEXTURE_MAG_FILTER, filtering);
+    funcs->glGenTextures(1, &tx_id);
+    funcs->glBindTexture(target, tx_id);
+    funcs->glTexParameteri(target, GL_TEXTURE_MAG_FILTER, filtering);
 
     QOpenGLContext *ctx = QOpenGLContext::currentContext();
     bool genMipmap = !ctx->isOpenGLES();
@@ -2293,23 +2474,23 @@ QGLTexture* QGLContextPrivate::bindTexture(const QImage &image, GLenum target, G
     {
 #if !defined(QT_OPENGL_ES_2)
         if (genMipmap) {
-            glHint(GL_GENERATE_MIPMAP_HINT_SGIS, GL_NICEST);
-            glTexParameteri(target, GL_GENERATE_MIPMAP_SGIS, GL_TRUE);
+            funcs->glHint(GL_GENERATE_MIPMAP_HINT_SGIS, GL_NICEST);
+            funcs->glTexParameteri(target, GL_GENERATE_MIPMAP_SGIS, GL_TRUE);
         } else {
-            glHint(GL_GENERATE_MIPMAP_HINT, GL_NICEST);
+            funcs->glHint(GL_GENERATE_MIPMAP_HINT, GL_NICEST);
             genMipmap = true;
         }
 #else
-        glHint(GL_GENERATE_MIPMAP_HINT, GL_NICEST);
+        funcs->glHint(GL_GENERATE_MIPMAP_HINT, GL_NICEST);
         genMipmap = true;
 #endif
-        glTexParameteri(target, GL_TEXTURE_MIN_FILTER, options & QGLContext::LinearFilteringBindOption
-                        ? GL_LINEAR_MIPMAP_LINEAR : GL_NEAREST_MIPMAP_NEAREST);
+        funcs->glTexParameteri(target, GL_TEXTURE_MIN_FILTER, options & QGLContext::LinearFilteringBindOption
+                               ? GL_LINEAR_MIPMAP_LINEAR : GL_NEAREST_MIPMAP_NEAREST);
 #ifdef QGL_BIND_TEXTURE_DEBUG
         printf(" - generating mipmaps (%d ms)\n", time.elapsed());
 #endif
     } else {
-        glTexParameteri(target, GL_TEXTURE_MIN_FILTER, filtering);
+        funcs->glTexParameteri(target, GL_TEXTURE_MIN_FILTER, filtering);
     }
 
     QImage::Format target_format = img.format();
@@ -2438,12 +2619,12 @@ QGLTexture* QGLContextPrivate::bindTexture(const QImage &image, GLenum target, G
 #endif
 
     const QImage &constRef = img; // to avoid detach in bits()...
-    glTexImage2D(target, 0, internalFormat, img.width(), img.height(), 0, externalFormat,
-                 pixel_type, constRef.bits());
+    funcs->glTexImage2D(target, 0, internalFormat, img.width(), img.height(), 0, externalFormat,
+                        pixel_type, constRef.bits());
     if (genMipmap && ctx->isOpenGLES())
         q->functions()->glGenerateMipmap(target);
 #ifndef QT_NO_DEBUG
-    GLenum error = glGetError();
+    GLenum error = funcs->glGetError();
     if (error != GL_NO_ERROR) {
         qWarning(" - texture upload failed, error code 0x%x, enum: %d (%x)\n", error, target, target);
     }
@@ -2491,7 +2672,7 @@ QGLTexture *QGLContextPrivate::bindTexture(const QPixmap &pixmap, GLenum target,
             q->deleteTexture(texture->id);
             texture = 0;
         } else {
-            glBindTexture(target, texture->id);
+            qgl_functions()->glBindTexture(target, texture->id);
             return texture;
         }
     }
@@ -2532,7 +2713,8 @@ int QGLContextPrivate::maxTextureSize()
     if (max_texture_size != -1)
         return max_texture_size;
 
-    glGetIntegerv(GL_MAX_TEXTURE_SIZE, &max_texture_size);
+    QOpenGLFunctions *funcs = qgl_functions();
+    funcs->glGetIntegerv(GL_MAX_TEXTURE_SIZE, &max_texture_size);
 
 #ifndef QT_OPENGL_ES
     Q_Q(QGLContext);
@@ -2541,8 +2723,9 @@ int QGLContextPrivate::maxTextureSize()
 
         GLint size;
         GLint next = 64;
-        glTexImage2D(proxy, 0, GL_RGBA, next, next, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
-        glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &size);
+        funcs->glTexImage2D(proxy, 0, GL_RGBA, next, next, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
+        QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+        gl1funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &size);
         if (size == 0) {
             return max_texture_size;
         }
@@ -2552,8 +2735,8 @@ int QGLContextPrivate::maxTextureSize()
 
             if (next > max_texture_size)
                 break;
-            glTexImage2D(proxy, 0, GL_RGBA, next, next, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
-            glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &next);
+            funcs->glTexImage2D(proxy, 0, GL_RGBA, next, next, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
+            gl1funcs->glGetTexLevelParameteriv(proxy, 0, GL_TEXTURE_WIDTH, &next);
         } while (next > size);
 
         max_texture_size = size;
@@ -2670,7 +2853,7 @@ void QGLContext::deleteTexture(GLuint id)
 {
     if (QGLTextureCache::instance()->remove(this, id))
         return;
-    glDeleteTextures(1, &id);
+    qgl_functions()->glDeleteTextures(1, &id);
 }
 
 void qt_add_rect_to_array(const QRectF &r, GLfloat *array)
@@ -2706,6 +2889,7 @@ void qt_add_texcoords_to_array(qreal x1, qreal y1, qreal x2, qreal y2, GLfloat *
 
 static void qDrawTextureRect(const QRectF &target, GLint textureWidth, GLint textureHeight, GLenum textureTarget)
 {
+    QOpenGLFunctions *funcs = qgl_functions();
     GLfloat tx = 1.0f;
     GLfloat ty = 1.0f;
 
@@ -2716,8 +2900,9 @@ static void qDrawTextureRect(const QRectF &target, GLint textureWidth, GLint tex
 #else
     if (textureTarget != GL_TEXTURE_2D && !QOpenGLContext::currentContext()->isOpenGLES()) {
         if (textureWidth == -1 || textureHeight == -1) {
-            glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_WIDTH, &textureWidth);
-            glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_HEIGHT, &textureHeight);
+            QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+            gl1funcs->glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_WIDTH, &textureWidth);
+            gl1funcs->glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_HEIGHT, &textureHeight);
         }
 
         tx = GLfloat(textureWidth);
@@ -2732,15 +2917,16 @@ static void qDrawTextureRect(const QRectF &target, GLint textureWidth, GLint tex
     GLfloat vertexArray[4*2];
     qt_add_rect_to_array(target, vertexArray);
 
-    glVertexPointer(2, GL_FLOAT, 0, vertexArray);
-    glTexCoordPointer(2, GL_FLOAT, 0, texCoordArray);
+    QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+    gl1funcs->glVertexPointer(2, GL_FLOAT, 0, vertexArray);
+    gl1funcs->glTexCoordPointer(2, GL_FLOAT, 0, texCoordArray);
 
-    glEnableClientState(GL_VERTEX_ARRAY);
-    glEnableClientState(GL_TEXTURE_COORD_ARRAY);
-    glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
+    gl1funcs->glEnableClientState(GL_VERTEX_ARRAY);
+    gl1funcs->glEnableClientState(GL_TEXTURE_COORD_ARRAY);
+    funcs->glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
 
-    glDisableClientState(GL_VERTEX_ARRAY);
-    glDisableClientState(GL_TEXTURE_COORD_ARRAY);
+    gl1funcs->glDisableClientState(GL_VERTEX_ARRAY);
+    gl1funcs->glDisableClientState(GL_TEXTURE_COORD_ARRAY);
 }
 
 #endif // !QT_OPENGL_ES_2
@@ -2781,6 +2967,7 @@ void QGLContext::drawTexture(const QRectF &target, GLuint textureId, GLenum text
 #endif
 
 #ifndef QT_OPENGL_ES_2
+     QOpenGLFunctions *funcs = qgl_functions();
      if (!contextHandle()->isOpenGLES()) {
 #ifdef QT_OPENGL_ES
         if (textureTarget != GL_TEXTURE_2D) {
@@ -2788,22 +2975,22 @@ void QGLContext::drawTexture(const QRectF &target, GLuint textureId, GLenum text
             return;
         }
 #else
-        const bool wasEnabled = glIsEnabled(GL_TEXTURE_2D);
+        const bool wasEnabled = funcs->glIsEnabled(GL_TEXTURE_2D);
         GLint oldTexture;
-        glGetIntegerv(GL_TEXTURE_BINDING_2D, &oldTexture);
+        funcs->glGetIntegerv(GL_TEXTURE_BINDING_2D, &oldTexture);
 #endif
 
-        glEnable(textureTarget);
-        glBindTexture(textureTarget, textureId);
+        funcs->glEnable(textureTarget);
+        funcs->glBindTexture(textureTarget, textureId);
 
         qDrawTextureRect(target, -1, -1, textureTarget);
 
 #ifdef QT_OPENGL_ES
-        glDisable(textureTarget);
+        funcs->glDisable(textureTarget);
 #else
         if (!wasEnabled)
-            glDisable(textureTarget);
-        glBindTexture(textureTarget, oldTexture);
+            funcs->glDisable(textureTarget);
+        funcs->glBindTexture(textureTarget, oldTexture);
 #endif
         return;
     }
@@ -2844,18 +3031,20 @@ void QGLContext::drawTexture(const QPointF &point, GLuint textureId, GLenum text
     Q_UNUSED(textureTarget);
 #else
     if (!contextHandle()->isOpenGLES()) {
-        const bool wasEnabled = glIsEnabled(GL_TEXTURE_2D);
+        QOpenGLFunctions *funcs = qgl_functions();
+        const bool wasEnabled = funcs->glIsEnabled(GL_TEXTURE_2D);
         GLint oldTexture;
-        glGetIntegerv(GL_TEXTURE_BINDING_2D, &oldTexture);
+        funcs->glGetIntegerv(GL_TEXTURE_BINDING_2D, &oldTexture);
 
-        glEnable(textureTarget);
-        glBindTexture(textureTarget, textureId);
+        funcs->glEnable(textureTarget);
+        funcs->glBindTexture(textureTarget, textureId);
 
         GLint textureWidth;
         GLint textureHeight;
 
-        glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_WIDTH, &textureWidth);
-        glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_HEIGHT, &textureHeight);
+        QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+        gl1funcs->glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_WIDTH, &textureWidth);
+        gl1funcs->glGetTexLevelParameteriv(textureTarget, 0, GL_TEXTURE_HEIGHT, &textureHeight);
 
         if (d_ptr->active_engine &&
             d_ptr->active_engine->type() == QPaintEngine::OpenGL2) {
@@ -2872,8 +3061,8 @@ void QGLContext::drawTexture(const QPointF &point, GLuint textureId, GLenum text
         qDrawTextureRect(QRectF(point, QSizeF(textureWidth, textureHeight)), textureWidth, textureHeight, textureTarget);
 
         if (!wasEnabled)
-            glDisable(textureTarget);
-        glBindTexture(textureTarget, oldTexture);
+            funcs->glDisable(textureTarget);
+        funcs->glBindTexture(textureTarget, oldTexture);
         return;
     }
 #endif
@@ -3031,7 +3220,10 @@ bool QGLContext::areSharing(const QGLContext *context1, const QGLContext *contex
     Returns a colormap index for the color c, in ColorIndex mode. Used
     by qglColor() and qglClearColor().
 */
-
+uint QGLContext::colorIndex(const QColor&) const
+{
+    return 0;
+}
 
 /*!
     \fn bool QGLContext::initialized() const
@@ -3076,10 +3268,12 @@ bool QGLContext::areSharing(const QGLContext *context1, const QGLContext *contex
     The returned QColor object will generally work as expected only
     when passed as the argument to QGLWidget::qglColor() or
     QGLWidget::qglClearColor(). Under certain circumstances it can
-    also be used to draw transparent graphics with a QPainter. See the
-    examples/opengl/overlay_x11 example for details.
+    also be used to draw transparent graphics with a QPainter.
 */
-
+QColor QGLContext::overlayTransparentColor() const
+{
+    return QColor(); // Invalid color
+}
 
 /*!
     Creates the GL context. Returns \c true if it was successful in
@@ -3239,6 +3433,51 @@ void QGLContext::moveToThread(QThread *thread)
     the virtual function chooseVisual() which finds an appropriate X
     visual. On other platforms it may work differently.
 */
+bool QGLContext::chooseContext(const QGLContext* shareContext)
+{
+    Q_D(QGLContext);
+    if(!d->paintDevice || d->paintDevice->devType() != QInternal::Widget) {
+        // Unlike in Qt 4, the only possible target is a widget backed by an OpenGL-based
+        // QWindow. Pixmaps in particular are not supported anymore as paint devices since
+        // starting from Qt 5 QPixmap is raster-backed on almost all platforms.
+        d->valid = false;
+    }else {
+        QWidget *widget = static_cast<QWidget *>(d->paintDevice);
+        QGLFormat glformat = format();
+        QSurfaceFormat winFormat = QGLFormat::toSurfaceFormat(glformat);
+        if (widget->testAttribute(Qt::WA_TranslucentBackground))
+            winFormat.setAlphaBufferSize(qMax(winFormat.alphaBufferSize(), 8));
+
+        QWindow *window = widget->windowHandle();
+        if (!window->handle()
+            || window->surfaceType() != QWindow::OpenGLSurface
+            || window->requestedFormat() != winFormat)
+        {
+            window->setSurfaceType(QWindow::OpenGLSurface);
+            window->setFormat(winFormat);
+            window->destroy();
+            window->create();
+        }
+
+        if (d->ownContext)
+            delete d->guiGlContext;
+        d->ownContext = true;
+        QOpenGLContext *shareGlContext = shareContext ? shareContext->d_func()->guiGlContext : 0;
+        d->guiGlContext = new QOpenGLContext;
+        d->guiGlContext->setFormat(winFormat);
+        d->guiGlContext->setShareContext(shareGlContext);
+        d->valid = d->guiGlContext->create();
+
+        if (d->valid)
+            d->guiGlContext->setQGLContextHandle(this, 0);
+
+        d->glFormat = QGLFormat::fromSurfaceFormat(d->guiGlContext->format());
+        d->setupSharing();
+    }
+
+
+    return d->valid;
+}
 
 /*!
     \fn void QGLContext::reset()
@@ -3247,7 +3486,33 @@ void QGLContext::moveToThread(QThread *thread)
 
     \sa create(), isValid()
 */
-
+void QGLContext::reset()
+{
+    Q_D(QGLContext);
+    if (!d->valid)
+        return;
+    d->cleanup();
+
+    d->crWin = false;
+    d->sharing = false;
+    d->valid = false;
+    d->transpColor = QColor();
+    d->initDone = false;
+    QGLContextGroup::removeShare(this);
+    if (d->guiGlContext) {
+        if (QOpenGLContext::currentContext() == d->guiGlContext)
+            doneCurrent();
+        if (d->ownContext) {
+            if (d->guiGlContext->thread() == QThread::currentThread())
+                delete d->guiGlContext;
+            else
+                d->guiGlContext->deleteLater();
+        } else
+            d->guiGlContext->setQGLContextHandle(0,0);
+        d->guiGlContext = 0;
+    }
+    d->ownContext = false;
+}
 
 /*!
     \fn void QGLContext::makeCurrent()
@@ -3263,7 +3528,26 @@ void QGLContext::moveToThread(QThread *thread)
     make sure you've first pushed the context to the relevant thread
     from the UI thread using moveToThread().
 */
+void QGLContext::makeCurrent()
+{
+    Q_D(QGLContext);
+    if (!d->paintDevice || d->paintDevice->devType() != QInternal::Widget)
+        return;
 
+    QWidget *widget = static_cast<QWidget *>(d->paintDevice);
+    if (!widget->windowHandle())
+        return;
+
+    if (d->guiGlContext->makeCurrent(widget->windowHandle())) {
+        if (!d->workaroundsCached) {
+            d->workaroundsCached = true;
+            const char *renderer = reinterpret_cast<const char *>(d->guiGlContext->functions()->glGetString(GL_RENDERER));
+            if (renderer && strstr(renderer, "Mali")) {
+                d->workaround_brokenFBOReadBack = true;
+            }
+        }
+    }
+}
 
 /*!
     \fn void QGLContext::swapBuffers() const
@@ -3271,7 +3555,18 @@ void QGLContext::moveToThread(QThread *thread)
     Call this to finish a frame of OpenGL rendering, and make sure to
     call makeCurrent() again before you begin a new frame.
 */
+void QGLContext::swapBuffers() const
+{
+    Q_D(const QGLContext);
+    if (!d->paintDevice || d->paintDevice->devType() != QInternal::Widget)
+        return;
 
+    QWidget *widget = static_cast<QWidget *>(d->paintDevice);
+    if (!widget->windowHandle())
+        return;
+
+    d->guiGlContext->swapBuffers(widget->windowHandle());
+}
 
 /*!
     \fn void QGLContext::doneCurrent()
@@ -3279,7 +3574,11 @@ void QGLContext::moveToThread(QThread *thread)
     Makes no GL context the current context. Normally, you do not need
     to call this function; QGLContext calls it as necessary.
 */
-
+void QGLContext::doneCurrent()
+{
+    Q_D(QGLContext);
+    d->guiGlContext->doneCurrent();
+}
 
 /*!
     \fn QPaintDevice* QGLContext::device() const
@@ -3289,7 +3588,6 @@ void QGLContext::moveToThread(QThread *thread)
     \sa QGLContext::QGLContext()
 */
 
-
 /*****************************************************************************
   QGLWidget implementation
  *****************************************************************************/
@@ -3298,6 +3596,7 @@ void QGLContext::moveToThread(QThread *thread)
 /*!
     \class QGLWidget
     \inmodule QtOpenGL
+    \obsolete
 
     \brief The QGLWidget class is a widget for rendering OpenGL graphics.
 
@@ -3307,6 +3606,11 @@ void QGLContext::moveToThread(QThread *thread)
     except that you have the choice between using QPainter and
     standard OpenGL rendering commands.
 
+    \note This class is part of the legacy \l {Qt OpenGL} module and,
+    like the other \c QGL classes, should be avoided in the new
+    applications. Instead, starting from Qt 5.4, prefer using
+    QOpenGLWidget and the \c QOpenGL classes.
+
     QGLWidget provides three convenient virtual functions that you can
     reimplement in your subclass to perform the typical OpenGL tasks:
 
@@ -3405,10 +3709,6 @@ void QGLContext::moveToThread(QThread *thread)
     \li Call QPainter::end() to finish painting.
     \endlist
 
-    Overpainting 2D content on top of 3D content takes a little more effort.
-    One approach to doing this is shown in the
-    \l{Overpainting Example}{Overpainting} example.
-
     \section1 Threading
 
     As of Qt version 4.8, support for doing threaded GL rendering has
@@ -3502,8 +3802,7 @@ void QGLContext::moveToThread(QThread *thread)
     \e{OpenGL is a trademark of Silicon Graphics, Inc. in the United States and other
     countries.}
 
-    \sa QGLPixelBuffer, {Hello GL Example}, {2D Painting Example}, {Overpainting Example},
-        {Grabber Example}
+    \sa QOpenGLWidget, QGLPixelBuffer
 */
 
 /*!
@@ -3688,6 +3987,11 @@ QGLWidget::~QGLWidget()
     \a proc. 0 is returned if a pointer to the function could not be
     obtained.
 */
+QFunctionPointer QGLContext::getProcAddress(const QString &procName) const
+{
+    Q_D(const QGLContext);
+    return d->guiGlContext->getProcAddress(procName.toLatin1());
+}
 
 /*!
     \fn bool QGLWidget::isValid() const
@@ -3775,8 +4079,10 @@ void QGLWidget::swapBuffers()
 
     \sa context()
 */
-
-
+const QGLContext* QGLWidget::overlayContext() const
+{
+    return 0;
+}
 
 /*!
     \fn void QGLWidget::makeOverlayCurrent()
@@ -3789,7 +4095,9 @@ void QGLWidget::swapBuffers()
 
     \sa makeCurrent()
 */
-
+void QGLWidget::makeOverlayCurrent()
+{
+}
 
 /*!
   \obsolete
@@ -3865,8 +4173,28 @@ void QGLWidget::setFormat(const QGLFormat &format)
 
   \sa context(), isSharing()
 */
+void QGLWidget::setContext(QGLContext *context,
+                            const QGLContext* shareContext,
+                            bool deleteOldContext)
+{
+    Q_D(QGLWidget);
+    if (context == 0) {
+        qWarning("QGLWidget::setContext: Cannot set null context");
+        return;
+    }
+
+    if (context->device() == 0) // a context may refere to more than 1 window.
+        context->setDevice(this); //but its better to point to 1 of them than none of them.
 
+    QGLContext* oldcx = d->glcx;
+    d->glcx = context;
 
+    if (!d->glcx->isValid())
+        d->glcx->create(shareContext ? shareContext : oldcx);
+
+    if (deleteOldContext)
+        delete oldcx;
+}
 
 /*!
     \fn void QGLWidget::updateGL()
@@ -3892,7 +4220,9 @@ void QGLWidget::updateGL()
     The widget's rendering context will become the current context and
     initializeGL() will be called if it hasn't already been called.
 */
-
+void QGLWidget::updateOverlayGL()
+{
+}
 
 /*!
     This virtual function is called once before the first call to
@@ -3921,7 +4251,7 @@ void QGLWidget::initializeGL()
 
 void QGLWidget::paintGL()
 {
-    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
+    qgl_functions()->glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
 }
 
 
@@ -3994,6 +4324,20 @@ void QGLWidget::resizeOverlayGL(int, int)
 {
 }
 
+bool QGLWidget::event(QEvent *e)
+{
+    Q_D(QGLWidget);
+
+    // A re-parent will destroy the window and re-create it. We should not reset the context while it happens.
+    if (e->type() == QEvent::ParentAboutToChange)
+        d->parent_changing = true;
+
+    if (e->type() == QEvent::ParentChange)
+        d->parent_changing = false;
+
+    return QWidget::event(e);
+}
+
 /*!
     \fn void QGLWidget::paintEvent(QPaintEvent *event)
 
@@ -4019,7 +4363,21 @@ void QGLWidget::paintEvent(QPaintEvent *)
     Handles resize events that are passed in the \a event parameter.
     Calls the virtual function resizeGL().
 */
+void QGLWidget::resizeEvent(QResizeEvent *e)
+{
+    Q_D(QGLWidget);
 
+    QWidget::resizeEvent(e);
+    if (!isValid())
+        return;
+    makeCurrent();
+    if (!d->glcx->initialized())
+        glInit();
+    const qreal scaleFactor = (window() && window()->windowHandle()) ?
+        window()->windowHandle()->devicePixelRatio() : 1.0;
+
+    resizeGL(width() * scaleFactor, height() * scaleFactor);
+}
 
 /*!
     Renders the current scene on a pixmap and returns the pixmap.
@@ -4148,7 +4506,7 @@ void QGLWidget::glDraw()
     makeCurrent();
 #ifndef QT_OPENGL_ES
     if (d->glcx->deviceIsPixmap() && !d->glcx->contextHandle()->isOpenGLES())
-        glDrawBuffer(GL_FRONT);
+        qgl1_functions()->glDrawBuffer(GL_FRONT);
 #endif
     QSize readback_target_size = d->glcx->d_ptr->readback_target_size;
     if (!d->glcx->initialized()) {
@@ -4170,7 +4528,7 @@ void QGLWidget::glDraw()
         if (d->autoSwap)
             swapBuffers();
     } else {
-        glFlush();
+        qgl_functions()->glFlush();
     }
 }
 
@@ -4188,20 +4546,20 @@ void QGLWidget::qglColor(const QColor& c) const
 {
 #if !defined(QT_OPENGL_ES_2)
 #ifdef QT_OPENGL_ES
-    glColor4f(c.redF(), c.greenF(), c.blueF(), c.alphaF());
+    qgl_functions()->glColor4f(c.redF(), c.greenF(), c.blueF(), c.alphaF());
 #else
     Q_D(const QGLWidget);
     const QGLContext *ctx = QGLContext::currentContext();
     if (ctx && !ctx->contextHandle()->isOpenGLES()) {
         if (ctx->format().rgba())
-            glColor4f(c.redF(), c.greenF(), c.blueF(), c.alphaF());
+            qgl1_functions()->glColor4f(c.redF(), c.greenF(), c.blueF(), c.alphaF());
         else if (!d->cmap.isEmpty()) { // QGLColormap in use?
             int i = d->cmap.find(c.rgb());
             if (i < 0)
                 i = d->cmap.findNearest(c.rgb());
-            glIndexi(i);
+            qgl1_functions()->glIndexi(i);
         } else
-            glIndexi(ctx->colorIndex(c));
+            qgl1_functions()->glIndexi(ctx->colorIndex(c));
     }
 #endif //QT_OPENGL_ES
 #else
@@ -4220,23 +4578,23 @@ void QGLWidget::qglColor(const QColor& c) const
 void QGLWidget::qglClearColor(const QColor& c) const
 {
 #ifdef QT_OPENGL_ES
-    glClearColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
+    qgl_functions()->glClearColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
 #else
     Q_D(const QGLWidget);
     const QGLContext *ctx = QGLContext::currentContext();
     if (ctx && !ctx->contextHandle()->isOpenGLES()) {
         if (ctx->format().rgba())
-            glClearColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
+            qgl_functions()->glClearColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
         else if (!d->cmap.isEmpty()) { // QGLColormap in use?
             int i = d->cmap.find(c.rgb());
             if (i < 0)
                 i = d->cmap.findNearest(c.rgb());
-            glClearIndex(i);
+            qgl1_functions()->glClearIndex(i);
         } else {
-            glClearIndex(ctx->colorIndex(c));
+            qgl1_functions()->glClearIndex(ctx->colorIndex(c));
         }
     } else {
-        glClearColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
+        qgl_functions()->glClearColor(c.redF(), c.greenF(), c.blueF(), c.alphaF());
     }
 #endif
 }
@@ -4305,6 +4663,11 @@ QImage QGLWidget::convertToGLFormat(const QImage& img)
 
     \sa setColormap(), QGLColormap::isEmpty()
 */
+const QGLColormap & QGLWidget::colormap() const
+{
+    Q_D(const QGLWidget);
+    return d->cmap;
+}
 
 /*!
     \fn void QGLWidget::setColormap(const QGLColormap & cmap)
@@ -4314,47 +4677,56 @@ QImage QGLWidget::convertToGLFormat(const QImage& img)
 
     \sa colormap()
 */
+void QGLWidget::setColormap(const QGLColormap & c)
+{
+    Q_UNUSED(c);
+}
 
 #ifndef QT_OPENGL_ES
 
 static void qt_save_gl_state()
 {
-    glPushClientAttrib(GL_CLIENT_ALL_ATTRIB_BITS);
-    glPushAttrib(GL_ALL_ATTRIB_BITS);
-    glMatrixMode(GL_TEXTURE);
-    glPushMatrix();
-    glLoadIdentity();
-    glMatrixMode(GL_PROJECTION);
-    glPushMatrix();
-    glMatrixMode(GL_MODELVIEW);
-    glPushMatrix();
-
-    glShadeModel(GL_FLAT);
-    glDisable(GL_CULL_FACE);
-    glDisable(GL_LIGHTING);
-    glDisable(GL_STENCIL_TEST);
-    glDisable(GL_DEPTH_TEST);
-    glEnable(GL_BLEND);
-    glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA);
+    QOpenGLFunctions *funcs = qgl_functions();
+    QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+
+    gl1funcs->glPushClientAttrib(GL_CLIENT_ALL_ATTRIB_BITS);
+    gl1funcs->glPushAttrib(GL_ALL_ATTRIB_BITS);
+    gl1funcs->glMatrixMode(GL_TEXTURE);
+    gl1funcs->glPushMatrix();
+    gl1funcs->glLoadIdentity();
+    gl1funcs->glMatrixMode(GL_PROJECTION);
+    gl1funcs->glPushMatrix();
+    gl1funcs->glMatrixMode(GL_MODELVIEW);
+    gl1funcs->glPushMatrix();
+
+    gl1funcs->glShadeModel(GL_FLAT);
+    funcs->glDisable(GL_CULL_FACE);
+    funcs->glDisable(GL_LIGHTING);
+    funcs->glDisable(GL_STENCIL_TEST);
+    funcs->glDisable(GL_DEPTH_TEST);
+    funcs->glEnable(GL_BLEND);
+    funcs->glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA);
 }
 
 static void qt_restore_gl_state()
 {
-    glMatrixMode(GL_TEXTURE);
-    glPopMatrix();
-    glMatrixMode(GL_PROJECTION);
-    glPopMatrix();
-    glMatrixMode(GL_MODELVIEW);
-    glPopMatrix();
-    glPopAttrib();
-    glPopClientAttrib();
+    QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+
+    gl1funcs->glMatrixMode(GL_TEXTURE);
+    gl1funcs->glPopMatrix();
+    gl1funcs->glMatrixMode(GL_PROJECTION);
+    gl1funcs->glPopMatrix();
+    gl1funcs->glMatrixMode(GL_MODELVIEW);
+    gl1funcs->glPopMatrix();
+    gl1funcs->glPopAttrib();
+    gl1funcs->glPopClientAttrib();
 }
 
 static void qt_gl_draw_text(QPainter *p, int x, int y, const QString &str,
                             const QFont &font)
 {
     GLfloat color[4];
-    glGetFloatv(GL_CURRENT_COLOR, &color[0]);
+    qgl_functions()->glGetFloatv(GL_CURRENT_COLOR, &color[0]);
 
     QColor col;
     col.setRgbF(color[0], color[1], color[2],color[3]);
@@ -4391,8 +4763,6 @@ static void qt_gl_draw_text(QPainter *p, int x, int y, const QString &str,
    \note This function can only be used inside a
    QPainter::beginNativePainting()/QPainter::endNativePainting() block
    if a painter is active on the QGLWidget.
-
-   \l{Overpainting Example}{Overpaint} with QPainter::drawText() instead.
 */
 
 void QGLWidget::renderText(int x, int y, const QString &str, const QFont &font)
@@ -4404,10 +4774,11 @@ void QGLWidget::renderText(int x, int y, const QString &str, const QFont &font)
         if (str.isEmpty() || !isValid())
             return;
 
+        QOpenGLFunctions *funcs = qgl_functions();
         GLint view[4];
-        bool use_scissor_testing = glIsEnabled(GL_SCISSOR_TEST);
+        bool use_scissor_testing = funcs->glIsEnabled(GL_SCISSOR_TEST);
         if (!use_scissor_testing)
-            glGetIntegerv(GL_VIEWPORT, &view[0]);
+            funcs->glGetIntegerv(GL_VIEWPORT, &view[0]);
         int width = d->glcx->device()->width();
         int height = d->glcx->device()->height();
         bool auto_swap = autoBufferSwap();
@@ -4422,8 +4793,8 @@ void QGLWidget::renderText(int x, int y, const QString &str, const QFont &font)
             reuse_painter = true;
             p = engine->painter();
 
-            glDisable(GL_DEPTH_TEST);
-            glViewport(0, 0, width, height);
+            funcs->glDisable(GL_DEPTH_TEST);
+            funcs->glViewport(0, 0, width, height);
         } else {
             setAutoBufferSwap(false);
             // disable glClear() as a result of QPainter::begin()
@@ -4435,11 +4806,11 @@ void QGLWidget::renderText(int x, int y, const QString &str, const QFont &font)
         if (!use_scissor_testing && viewport != rect()) {
             // if the user hasn't set a scissor box, we set one that
             // covers the current viewport
-            glScissor(view[0], view[1], view[2], view[3]);
-            glEnable(GL_SCISSOR_TEST);
+            funcs->glScissor(view[0], view[1], view[2], view[3]);
+            funcs->glEnable(GL_SCISSOR_TEST);
         } else if (use_scissor_testing) {
             // use the scissor box set by the user
-            glEnable(GL_SCISSOR_TEST);
+            funcs->glEnable(GL_SCISSOR_TEST);
         }
 
         qt_gl_draw_text(p, x, y, str, font);
@@ -4482,8 +4853,6 @@ void QGLWidget::renderText(int x, int y, const QString &str, const QFont &font)
     \note This function can only be used inside a
     QPainter::beginNativePainting()/QPainter::endNativePainting() block
     if a painter is active on the QGLWidget.
-
-    \l{Overpainting Example}{Overpaint} with QPainter::drawText() instead.
 */
 void QGLWidget::renderText(double x, double y, double z, const QString &str, const QFont &font)
 {
@@ -4494,15 +4863,17 @@ void QGLWidget::renderText(double x, double y, double z, const QString &str, con
         if (str.isEmpty() || !isValid())
             return;
 
+        QOpenGLFunctions *funcs = qgl_functions();
         bool auto_swap = autoBufferSwap();
 
         int width = d->glcx->device()->width();
         int height = d->glcx->device()->height();
         GLdouble model[4 * 4], proj[4 * 4];
         GLint view[4];
-        glGetDoublev(GL_MODELVIEW_MATRIX, &model[0]);
-        glGetDoublev(GL_PROJECTION_MATRIX, &proj[0]);
-        glGetIntegerv(GL_VIEWPORT, &view[0]);
+        QOpenGLFunctions_1_1 *gl1funcs = qgl1_functions();
+        gl1funcs->glGetDoublev(GL_MODELVIEW_MATRIX, &model[0]);
+        gl1funcs->glGetDoublev(GL_PROJECTION_MATRIX, &proj[0]);
+        funcs->glGetIntegerv(GL_VIEWPORT, &view[0]);
         GLdouble win_x = 0, win_y = 0, win_z = 0;
         qgluProject(x, y, z, &model[0], &proj[0], &view[0],
                     &win_x, &win_y, &win_z);
@@ -4512,8 +4883,8 @@ void QGLWidget::renderText(double x, double y, double z, const QString &str, con
 
         QPainter *p;
         bool reuse_painter = false;
-        bool use_depth_testing = glIsEnabled(GL_DEPTH_TEST);
-        bool use_scissor_testing = glIsEnabled(GL_SCISSOR_TEST);
+        bool use_depth_testing = funcs->glIsEnabled(GL_DEPTH_TEST);
+        bool use_scissor_testing = funcs->glIsEnabled(GL_SCISSOR_TEST);
 
         qt_save_gl_state();
 
@@ -4529,16 +4900,16 @@ void QGLWidget::renderText(double x, double y, double z, const QString &str, con
 
         QRect viewport(view[0], view[1], view[2], view[3]);
         if (!use_scissor_testing && viewport != rect()) {
-            glScissor(view[0], view[1], view[2], view[3]);
-            glEnable(GL_SCISSOR_TEST);
+            funcs->glScissor(view[0], view[1], view[2], view[3]);
+            funcs->glEnable(GL_SCISSOR_TEST);
         } else if (use_scissor_testing) {
-            glEnable(GL_SCISSOR_TEST);
+            funcs->glEnable(GL_SCISSOR_TEST);
         }
-        glViewport(0, 0, width, height);
-        glAlphaFunc(GL_GREATER, 0.0);
-        glEnable(GL_ALPHA_TEST);
+        funcs->glViewport(0, 0, width, height);
+        gl1funcs->glAlphaFunc(GL_GREATER, 0.0);
+        funcs->glEnable(GL_ALPHA_TEST);
         if (use_depth_testing)
-            glEnable(GL_DEPTH_TEST);
+            funcs->glEnable(GL_DEPTH_TEST);
 
         // The only option in Qt 5 is the shader-based OpenGL 2 paint engine.
         // Setting fixed pipeline transformations is futile. Instead, pass the
@@ -4731,6 +5102,11 @@ QPaintEngine *QGLWidget::paintEngine() const
     return qt_qgl_paint_engine();
 }
 
+void QGLWidgetPrivate::init(QGLContext *context, const QGLWidget *shareWidget)
+{
+    initContext(context, shareWidget);
+}
+
 /*
   This is the shared initialization for all platforms. Called from QGLWidgetPrivate::init()
 */
@@ -4751,6 +5127,19 @@ void QGLWidgetPrivate::initContext(QGLContext *context, const QGLWidget* shareWi
         glcx = new QGLContext(QGLFormat::defaultFormat(), q);
 }
 
+bool QGLWidgetPrivate::renderCxPm(QPixmap*)
+{
+    return false;
+}
+
+/*! \internal
+  Free up any allocated colormaps. This fn is only called for
+  top-level widgets.
+*/
+void QGLWidgetPrivate::cleanupColormaps()
+{
+}
+
 Q_GLOBAL_STATIC(QString, qt_gl_lib_name)
 
 void qt_set_gl_library_name(const QString& name)
@@ -4976,10 +5365,11 @@ QSize QGLTexture::bindCompressedTextureDDS(const char *buf, int len)
     const GLubyte *pixels =
         reinterpret_cast<const GLubyte *>(buf + ddsHeader->dwSize + 4);
 
-    glGenTextures(1, &id);
-    glBindTexture(GL_TEXTURE_2D, id);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
+    QOpenGLFunctions *funcs = qgl_functions();
+    funcs->glGenTextures(1, &id);
+    funcs->glBindTexture(GL_TEXTURE_2D, id);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
 
     int size;
     int offset = 0;
@@ -5072,23 +5462,24 @@ QSize QGLTexture::bindCompressedTexturePVR(const char *buf, int len)
     }
 
     // Create the texture.
-    glPixelStorei(GL_UNPACK_ALIGNMENT, 1);
-    glGenTextures(1, &id);
-    glBindTexture(GL_TEXTURE_2D, id);
+    QOpenGLFunctions *funcs = qgl_functions();
+    funcs->glPixelStorei(GL_UNPACK_ALIGNMENT, 1);
+    funcs->glGenTextures(1, &id);
+    funcs->glBindTexture(GL_TEXTURE_2D, id);
     if (pvrHeader->mipMapCount) {
         if ((options & QGLContext::LinearFilteringBindOption) != 0) {
-            glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
-            glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR);
+            funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
+            funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR);
         } else {
-            glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-            glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST_MIPMAP_NEAREST);
+            funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+            funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST_MIPMAP_NEAREST);
         }
     } else if ((options & QGLContext::LinearFilteringBindOption) != 0) {
-        glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
-        glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
+        funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
+        funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
     } else {
-        glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-        glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+        funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+        funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
     }
 
     // Load the compressed mipmap levels.
@@ -5114,7 +5505,7 @@ QSize QGLTexture::bindCompressedTexturePVR(const char *buf, int len)
     }
 
     // Restore the default pixel alignment for later texture uploads.
-    glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
+    funcs->glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
 
     // Set the invert flag for the texture.  The "vertical flip"
     // flag in PVR is the opposite sense to our sense of inversion.
diff --git a/src/opengl/qgl.h b/src/opengl/qgl.h
index 72fe7b8da6..482c215b51 100644
--- a/src/opengl/qgl.h
+++ b/src/opengl/qgl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qgl_p.h b/src/opengl/qgl_p.h
index ac4b6d2acc..c4151a3d34 100644
--- a/src/opengl/qgl_p.h
+++ b/src/opengl/qgl_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -347,7 +339,7 @@ public:
 
 private:
     static void freeTextureFunc(QOpenGLFunctions *, GLuint id) {
-        glDeleteTextures(1, &id);
+        QOpenGLContext::currentContext()->functions()->glDeleteTextures(1, &id);
     }
 };
 
diff --git a/src/opengl/qgl_qpa.cpp b/src/opengl/qgl_qpa.cpp
deleted file mode 100644
index 6194f82922..0000000000
--- a/src/opengl/qgl_qpa.cpp
+++ /dev/null
@@ -1,466 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtOpenGL module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QApplication>
-#include <private/qapplication_p.h>
-#include <QPixmap>
-#include <QDebug>
-
-#include <qpa/qplatformopenglcontext.h>
-#include <qpa/qplatformwindow.h>
-#include <QtGui/QSurfaceFormat>
-
-#include "qgl.h"
-#include "qgl_p.h"
-
-QT_BEGIN_NAMESPACE
-
-/*!
-    Returns an OpenGL format for the window format specified by \a format.
-*/
-QGLFormat QGLFormat::fromSurfaceFormat(const QSurfaceFormat &format)
-{
-    QGLFormat retFormat;
-    if (format.alphaBufferSize() >= 0)
-        retFormat.setAlphaBufferSize(format.alphaBufferSize());
-    if (format.blueBufferSize() >= 0)
-        retFormat.setBlueBufferSize(format.blueBufferSize());
-    if (format.greenBufferSize() >= 0)
-        retFormat.setGreenBufferSize(format.greenBufferSize());
-    if (format.redBufferSize() >= 0)
-        retFormat.setRedBufferSize(format.redBufferSize());
-    if (format.depthBufferSize() >= 0)
-        retFormat.setDepthBufferSize(format.depthBufferSize());
-    if (format.samples() > 1) {
-        retFormat.setSampleBuffers(true);
-        retFormat.setSamples(format.samples());
-    }
-    if (format.stencilBufferSize() > 0) {
-        retFormat.setStencil(true);
-        retFormat.setStencilBufferSize(format.stencilBufferSize());
-    }
-    retFormat.setSwapInterval(format.swapInterval());
-    retFormat.setDoubleBuffer(format.swapBehavior() != QSurfaceFormat::SingleBuffer);
-    retFormat.setStereo(format.stereo());
-    retFormat.setVersion(format.majorVersion(), format.minorVersion());
-    retFormat.setProfile(static_cast<QGLFormat::OpenGLContextProfile>(format.profile()));
-    return retFormat;
-}
-
-/*!
-    Returns a window format for the OpenGL format specified by \a format.
-*/
-QSurfaceFormat QGLFormat::toSurfaceFormat(const QGLFormat &format)
-{
-    QSurfaceFormat retFormat;
-    if (format.alpha())
-        retFormat.setAlphaBufferSize(format.alphaBufferSize() == -1 ? 1 : format.alphaBufferSize());
-    if (format.blueBufferSize() >= 0)
-        retFormat.setBlueBufferSize(format.blueBufferSize());
-    if (format.greenBufferSize() >= 0)
-        retFormat.setGreenBufferSize(format.greenBufferSize());
-    if (format.redBufferSize() >= 0)
-        retFormat.setRedBufferSize(format.redBufferSize());
-    if (format.depth())
-        retFormat.setDepthBufferSize(format.depthBufferSize() == -1 ? 1 : format.depthBufferSize());
-    retFormat.setSwapBehavior(format.doubleBuffer() ? QSurfaceFormat::DoubleBuffer : QSurfaceFormat::SingleBuffer);
-    if (format.sampleBuffers())
-        retFormat.setSamples(format.samples() == -1 ? 4 : format.samples());
-    if (format.stencil())
-        retFormat.setStencilBufferSize(format.stencilBufferSize() == -1 ? 1 : format.stencilBufferSize());
-    retFormat.setSwapInterval(format.swapInterval());
-    retFormat.setStereo(format.stereo());
-    retFormat.setMajorVersion(format.majorVersion());
-    retFormat.setMinorVersion(format.minorVersion());
-    retFormat.setProfile(static_cast<QSurfaceFormat::OpenGLContextProfile>(format.profile()));
-    // QGLFormat has no way to set DeprecatedFunctions, that is, to tell that forward
-    // compatibility should not be requested. Some drivers fail to ignore the fwdcompat
-    // bit with compatibility profiles so make sure it is not set.
-    if (format.profile() == QGLFormat::CompatibilityProfile)
-        retFormat.setOption(QSurfaceFormat::DeprecatedFunctions);
-    return retFormat;
-}
-
-void QGLContextPrivate::setupSharing() {
-    Q_Q(QGLContext);
-    QOpenGLContext *sharedContext = guiGlContext->shareContext();
-    if (sharedContext) {
-        QGLContext *actualSharedContext = QGLContext::fromOpenGLContext(sharedContext);
-        sharing = true;
-        QGLContextGroup::addShare(q, actualSharedContext);
-    }
-}
-
-bool QGLFormat::hasOpenGL()
-{
-    return QApplicationPrivate::platformIntegration()
-            ->hasCapability(QPlatformIntegration::OpenGL);
-}
-
-static void qDeleteQGLContext(void *handle)
-{
-    QGLContext *context = static_cast<QGLContext *>(handle);
-    delete context;
-}
-
-bool QGLContext::chooseContext(const QGLContext* shareContext)
-{
-    Q_D(QGLContext);
-    if(!d->paintDevice || d->paintDevice->devType() != QInternal::Widget) {
-        // Unlike in Qt 4, the only possible target is a widget backed by an OpenGL-based
-        // QWindow. Pixmaps in particular are not supported anymore as paint devices since
-        // starting from Qt 5 QPixmap is raster-backed on almost all platforms.
-        d->valid = false;
-    }else {
-        QWidget *widget = static_cast<QWidget *>(d->paintDevice);
-        QGLFormat glformat = format();
-        QSurfaceFormat winFormat = QGLFormat::toSurfaceFormat(glformat);
-        if (widget->testAttribute(Qt::WA_TranslucentBackground))
-            winFormat.setAlphaBufferSize(qMax(winFormat.alphaBufferSize(), 8));
-
-        QWindow *window = widget->windowHandle();
-        if (!window->handle()
-            || window->surfaceType() != QWindow::OpenGLSurface
-            || window->requestedFormat() != winFormat)
-        {
-            window->setSurfaceType(QWindow::OpenGLSurface);
-            window->setFormat(winFormat);
-            window->destroy();
-            window->create();
-        }
-
-        if (d->ownContext)
-            delete d->guiGlContext;
-        d->ownContext = true;
-        QOpenGLContext *shareGlContext = shareContext ? shareContext->d_func()->guiGlContext : 0;
-        d->guiGlContext = new QOpenGLContext;
-        d->guiGlContext->setFormat(winFormat);
-        d->guiGlContext->setShareContext(shareGlContext);
-        d->valid = d->guiGlContext->create();
-
-        if (d->valid)
-            d->guiGlContext->setQGLContextHandle(this, 0);
-
-        d->glFormat = QGLFormat::fromSurfaceFormat(d->guiGlContext->format());
-        d->setupSharing();
-    }
-
-
-    return d->valid;
-}
-
-void QGLContext::reset()
-{
-    Q_D(QGLContext);
-    if (!d->valid)
-        return;
-    d->cleanup();
-
-    d->crWin = false;
-    d->sharing = false;
-    d->valid = false;
-    d->transpColor = QColor();
-    d->initDone = false;
-    QGLContextGroup::removeShare(this);
-    if (d->guiGlContext) {
-        if (QOpenGLContext::currentContext() == d->guiGlContext)
-            doneCurrent();
-        if (d->ownContext) {
-            if (d->guiGlContext->thread() == QThread::currentThread())
-                delete d->guiGlContext;
-            else
-                d->guiGlContext->deleteLater();
-        } else
-            d->guiGlContext->setQGLContextHandle(0,0);
-        d->guiGlContext = 0;
-    }
-    d->ownContext = false;
-}
-
-void QGLContext::makeCurrent()
-{
-    Q_D(QGLContext);
-    if (!d->paintDevice || d->paintDevice->devType() != QInternal::Widget)
-        return;
-
-    QWidget *widget = static_cast<QWidget *>(d->paintDevice);
-    if (!widget->windowHandle())
-        return;
-
-    if (d->guiGlContext->makeCurrent(widget->windowHandle())) {
-        if (!d->workaroundsCached) {
-            d->workaroundsCached = true;
-            const char *renderer = reinterpret_cast<const char *>(glGetString(GL_RENDERER));
-            if (renderer && strstr(renderer, "Mali")) {
-                d->workaround_brokenFBOReadBack = true;
-            }
-        }
-    }
-}
-
-void QGLContext::doneCurrent()
-{
-    Q_D(QGLContext);
-    d->guiGlContext->doneCurrent();
-}
-
-void QGLContext::swapBuffers() const
-{
-    Q_D(const QGLContext);
-    if (!d->paintDevice || d->paintDevice->devType() != QInternal::Widget)
-        return;
-
-    QWidget *widget = static_cast<QWidget *>(d->paintDevice);
-    if (!widget->windowHandle())
-        return;
-
-    d->guiGlContext->swapBuffers(widget->windowHandle());
-}
-
-QFunctionPointer QGLContext::getProcAddress(const QString &procName) const
-{
-    Q_D(const QGLContext);
-    return d->guiGlContext->getProcAddress(procName.toLatin1());
-}
-
-void QGLWidget::setContext(QGLContext *context,
-                            const QGLContext* shareContext,
-                            bool deleteOldContext)
-{
-    Q_D(QGLWidget);
-    if (context == 0) {
-        qWarning("QGLWidget::setContext: Cannot set null context");
-        return;
-    }
-
-    if (context->device() == 0) // a context may refere to more than 1 window.
-        context->setDevice(this); //but its better to point to 1 of them than none of them.
-
-    QGLContext* oldcx = d->glcx;
-    d->glcx = context;
-
-    if (!d->glcx->isValid())
-        d->glcx->create(shareContext ? shareContext : oldcx);
-
-    if (deleteOldContext)
-        delete oldcx;
-}
-
-void QGLWidgetPrivate::init(QGLContext *context, const QGLWidget *shareWidget)
-{
-    initContext(context, shareWidget);
-}
-
-bool QGLFormat::hasOpenGLOverlays()
-{
-    return false;
-}
-
-QColor QGLContext::overlayTransparentColor() const
-{
-    return QColor(); // Invalid color
-}
-
-uint QGLContext::colorIndex(const QColor&) const
-{
-    return 0;
-}
-
-/*
-    QGLTemporaryContext implementation
-*/
-class QGLTemporaryContextPrivate
-{
-public:
-    QWindow *window;
-    QOpenGLContext *context;
-
-    QGLContext *oldContext;
-};
-
-QGLTemporaryContext::QGLTemporaryContext(bool, QWidget *)
-    : d(new QGLTemporaryContextPrivate)
-{
-    d->oldContext = const_cast<QGLContext *>(QGLContext::currentContext());
-
-    d->window = new QWindow;
-    d->window->setSurfaceType(QWindow::OpenGLSurface);
-    d->window->setGeometry(QRect(0, 0, 3, 3));
-    d->window->create();
-
-    d->context = new QOpenGLContext;
-#if !defined(QT_OPENGL_ES)
-    if (QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGL) {
-        // On desktop, request latest released version
-        QSurfaceFormat format;
-#if defined(Q_OS_MAC)
-        // OS X is limited to OpenGL 3.2 Core Profile at present
-        // so set that here. If we use compatibility profile it
-        // only reports 2.x contexts.
-        format.setMajorVersion(3);
-        format.setMinorVersion(2);
-        format.setProfile(QSurfaceFormat::CoreProfile);
-#else
-        format.setMajorVersion(4);
-        format.setMinorVersion(3);
-#endif
-        d->context->setFormat(format);
-    }
-#endif // QT_OPENGL_ES
-    d->context->create();
-    d->context->makeCurrent(d->window);
-}
-
-QGLTemporaryContext::~QGLTemporaryContext()
-{
-    if (d->oldContext)
-        d->oldContext->makeCurrent();
-
-    delete d->context;
-    delete d->window;
-}
-
-
-bool QGLWidgetPrivate::renderCxPm(QPixmap*)
-{
-    return false;
-}
-
-/*! \internal
-  Free up any allocated colormaps. This fn is only called for
-  top-level widgets.
-*/
-void QGLWidgetPrivate::cleanupColormaps()
-{
-}
-
-bool QGLWidget::event(QEvent *e)
-{
-    Q_D(QGLWidget);
-
-    // A re-parent will destroy the window and re-create it. We should not reset the context while it happens.
-    if (e->type() == QEvent::ParentAboutToChange)
-        d->parent_changing = true;
-
-    if (e->type() == QEvent::ParentChange)
-        d->parent_changing = false;
-
-    return QWidget::event(e);
-}
-
-void QGLWidget::resizeEvent(QResizeEvent *e)
-{
-    Q_D(QGLWidget);
-
-    QWidget::resizeEvent(e);
-    if (!isValid())
-        return;
-    makeCurrent();
-    if (!d->glcx->initialized())
-        glInit();
-    const qreal scaleFactor = (window() && window()->windowHandle()) ?
-        window()->windowHandle()->devicePixelRatio() : 1.0;
-
-    resizeGL(width() * scaleFactor, height() * scaleFactor);
-}
-
-
-const QGLContext* QGLWidget::overlayContext() const
-{
-    return 0;
-}
-
-void QGLWidget::makeOverlayCurrent()
-{
-}
-
-
-void QGLWidget::updateOverlayGL()
-{
-}
-
-const QGLColormap & QGLWidget::colormap() const
-{
-    Q_D(const QGLWidget);
-    return d->cmap;
-}
-
-void QGLWidget::setColormap(const QGLColormap & c)
-{
-    Q_UNUSED(c);
-}
-
-QGLContext::QGLContext(QOpenGLContext *context)
-    : d_ptr(new QGLContextPrivate(this))
-{
-    Q_D(QGLContext);
-    d->init(0, QGLFormat::fromSurfaceFormat(context->format()));
-    d->guiGlContext = context;
-    d->guiGlContext->setQGLContextHandle(this,qDeleteQGLContext);
-    d->ownContext = false;
-    d->valid = context->isValid();
-    d->setupSharing();
-}
-
-QOpenGLContext *QGLContext::contextHandle() const
-{
-    Q_D(const QGLContext);
-    return d->guiGlContext;
-}
-
-/*!
-    Returns a OpenGL context for the window context specified by the \a context
-    parameter.
-*/
-QGLContext *QGLContext::fromOpenGLContext(QOpenGLContext *context)
-{
-    if (!context)
-        return 0;
-    if (context->qGLContextHandle()) {
-        return reinterpret_cast<QGLContext *>(context->qGLContextHandle());
-    }
-    QGLContext *glContext = new QGLContext(context);
-    //Don't call create on context. This can cause the platformFormat to be set on the widget, which
-    //will cause the platformWindow to be recreated.
-    return glContext;
-}
-
-QT_END_NAMESPACE
diff --git a/src/opengl/qglbuffer.cpp b/src/opengl/qglbuffer.cpp
index 1c9545990f..d64509f74c 100644
--- a/src/opengl/qglbuffer.cpp
+++ b/src/opengl/qglbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -347,9 +339,9 @@ bool QGLBuffer::read(int offset, void *data, int count)
     Q_D(QGLBuffer);
     if (!d->funcs->hasOpenGLFeature(QOpenGLFunctions::Buffers) || !d->guard->id())
         return false;
-    while (glGetError() != GL_NO_ERROR) ; // Clear error state.
+    while (d->funcs->glGetError() != GL_NO_ERROR) ; // Clear error state.
     d->funcs->glGetBufferSubData(d->type, offset, count, data);
-    return glGetError() == GL_NO_ERROR;
+    return d->funcs->glGetError() == GL_NO_ERROR;
 #else
     Q_UNUSED(offset);
     Q_UNUSED(data);
diff --git a/src/opengl/qglbuffer.h b/src/opengl/qglbuffer.h
index 2c26c7a0b2..f3e4b91ab1 100644
--- a/src/opengl/qglbuffer.h
+++ b/src/opengl/qglbuffer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglcolormap.cpp b/src/opengl/qglcolormap.cpp
index 576e2c6552..0f3ae905df 100644
--- a/src/opengl/qglcolormap.cpp
+++ b/src/opengl/qglcolormap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglcolormap.h b/src/opengl/qglcolormap.h
index ecca5aa6b7..70e289be1b 100644
--- a/src/opengl/qglcolormap.h
+++ b/src/opengl/qglcolormap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglframebufferobject.cpp b/src/opengl/qglframebufferobject.cpp
index 419055f1a3..4ef50e9334 100644
--- a/src/opengl/qglframebufferobject.cpp
+++ b/src/opengl/qglframebufferobject.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,11 +53,11 @@ extern QImage qt_gl_read_frame_buffer(const QSize&, bool, bool);
 #ifndef QT_NO_DEBUG
 #define QT_RESET_GLERROR()                                \
 {                                                         \
-    while (glGetError() != GL_NO_ERROR) {}                \
+    while (QOpenGLContext::currentContext()->functions()->glGetError() != GL_NO_ERROR) {} \
 }
 #define QT_CHECK_GLERROR()                                \
 {                                                         \
-    GLenum err = glGetError();                            \
+    GLenum err = QOpenGLContext::currentContext()->functions()->glGetError(); \
     if (err != GL_NO_ERROR) {                             \
         qDebug("[%s line %d] GL Error: %d",               \
                __FILE__, __LINE__, (int)err);             \
@@ -94,6 +86,10 @@ extern QImage qt_gl_read_frame_buffer(const QSize&, bool, bool);
 #define GL_DEPTH_COMPONENT24 0x81A6
 #endif
 
+#ifndef GL_DEPTH_COMPONENT24_OES
+#define GL_DEPTH_COMPONENT24_OES 0x81A6
+#endif
+
 #ifndef GL_READ_FRAMEBUFFER
 #define GL_READ_FRAMEBUFFER 0x8CA8
 #endif
@@ -460,7 +456,7 @@ namespace
     void freeTextureFunc(QGLContext *ctx, GLuint id)
     {
         Q_UNUSED(ctx);
-        glDeleteTextures(1, &id);
+        ctx->contextHandle()->functions()->glDeleteTextures(1, &id);
     }
 }
 
@@ -493,10 +489,10 @@ void QGLFramebufferObjectPrivate::init(QGLFramebufferObject *q, const QSize &sz,
     QT_CHECK_GLERROR();
     // init texture
     if (samples == 0) {
-        glGenTextures(1, &texture);
-        glBindTexture(target, texture);
-        glTexImage2D(target, 0, internal_format, size.width(), size.height(), 0,
-                GL_RGBA, GL_UNSIGNED_BYTE, NULL);
+        funcs.glGenTextures(1, &texture);
+        funcs.glBindTexture(target, texture);
+        funcs.glTexImage2D(target, 0, internal_format, size.width(), size.height(), 0,
+                           GL_RGBA, GL_UNSIGNED_BYTE, NULL);
         if (mipmap) {
             int width = size.width();
             int height = size.height();
@@ -505,26 +501,26 @@ void QGLFramebufferObjectPrivate::init(QGLFramebufferObject *q, const QSize &sz,
                 width = qMax(1, width >> 1);
                 height = qMax(1, height >> 1);
                 ++level;
-                glTexImage2D(target, level, internal_format, width, height, 0,
-                        GL_RGBA, GL_UNSIGNED_BYTE, NULL);
+                funcs.glTexImage2D(target, level, internal_format, width, height, 0,
+                                   GL_RGBA, GL_UNSIGNED_BYTE, NULL);
             }
         }
-        glTexParameteri(target, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
-        glTexParameteri(target, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-        glTexParameteri(target, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
-        glTexParameteri(target, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
+        funcs.glTexParameteri(target, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+        funcs.glTexParameteri(target, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+        funcs.glTexParameteri(target, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
+        funcs.glTexParameteri(target, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
         funcs.glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
                 target, texture, 0);
 
         QT_CHECK_GLERROR();
         valid = checkFramebufferStatus();
-        glBindTexture(target, 0);
+        funcs.glBindTexture(target, 0);
 
         color_buffer = 0;
     } else {
         mipmap = false;
         GLint maxSamples;
-        glGetIntegerv(GL_MAX_SAMPLES, &maxSamples);
+        funcs.glGetIntegerv(GL_MAX_SAMPLES, &maxSamples);
 
         samples = qBound(0, int(samples), int(maxSamples));
 
@@ -694,7 +690,7 @@ void QGLFramebufferObjectPrivate::init(QGLFramebufferObject *q, const QSize &sz,
         if (color_buffer)
             funcs.glDeleteRenderbuffers(1, &color_buffer);
         else
-            glDeleteTextures(1, &texture);
+            funcs.glDeleteTextures(1, &texture);
         if (depth_buffer)
             funcs.glDeleteRenderbuffers(1, &depth_buffer);
         if (stencil_buffer && depth_buffer != stencil_buffer)
@@ -792,8 +788,6 @@ void QGLFramebufferObjectPrivate::init(QGLFramebufferObject *q, const QSize &sz,
     OpenGL ES 2.0 is required for this to work.
 
     \note This class has been deprecated in favor of QOpenGLFramebufferObject.
-
-    \sa {Framebuffer Object 2 Example}
 */
 
 
diff --git a/src/opengl/qglframebufferobject.h b/src/opengl/qglframebufferobject.h
index affa47cac7..2382145da1 100644
--- a/src/opengl/qglframebufferobject.h
+++ b/src/opengl/qglframebufferobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglframebufferobject_p.h b/src/opengl/qglframebufferobject_p.h
index 1aefa0b442..95a64a1665 100644
--- a/src/opengl/qglframebufferobject_p.h
+++ b/src/opengl/qglframebufferobject_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglfunctions.cpp b/src/opengl/qglfunctions.cpp
index 5ad842bad4..a397adbb60 100644
--- a/src/opengl/qglfunctions.cpp
+++ b/src/opengl/qglfunctions.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglfunctions.h b/src/opengl/qglfunctions.h
index f822899e47..dfb3f9a45d 100644
--- a/src/opengl/qglfunctions.h
+++ b/src/opengl/qglfunctions.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglpaintdevice.cpp b/src/opengl/qglpaintdevice.cpp
index 6a8d5c042e..40cc7bb71d 100644
--- a/src/opengl/qglpaintdevice.cpp
+++ b/src/opengl/qglpaintdevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -164,18 +156,19 @@ void QGLWidgetGLPaintDevice::setWidget(QGLWidget* w)
 void QGLWidgetGLPaintDevice::beginPaint()
 {
     QGLPaintDevice::beginPaint();
+    QOpenGLFunctions *funcs = QOpenGLContext::currentContext()->functions();
     if (!glWidget->d_func()->disable_clear_on_painter_begin && glWidget->autoFillBackground()) {
         if (glWidget->testAttribute(Qt::WA_TranslucentBackground))
-            glClearColor(0.0, 0.0, 0.0, 0.0);
+            funcs->glClearColor(0.0, 0.0, 0.0, 0.0);
         else {
             const QColor &c = glWidget->palette().brush(glWidget->backgroundRole()).color();
             float alpha = c.alphaF();
-            glClearColor(c.redF() * alpha, c.greenF() * alpha, c.blueF() * alpha, alpha);
+            funcs->glClearColor(c.redF() * alpha, c.greenF() * alpha, c.blueF() * alpha, alpha);
         }
         if (context()->d_func()->workaround_needsFullClearOnEveryFrame)
-            glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT | GL_STENCIL_BUFFER_BIT);
+            funcs->glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT | GL_STENCIL_BUFFER_BIT);
         else
-            glClear(GL_COLOR_BUFFER_BIT);
+            funcs->glClear(GL_COLOR_BUFFER_BIT);
     }
 }
 
diff --git a/src/opengl/qglpaintdevice_p.h b/src/opengl/qglpaintdevice_p.h
index 4fa17306b5..f0855317ea 100644
--- a/src/opengl/qglpaintdevice_p.h
+++ b/src/opengl/qglpaintdevice_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglpixelbuffer.cpp b/src/opengl/qglpixelbuffer.cpp
index 12b26e5381..56bfaebe4f 100644
--- a/src/opengl/qglpixelbuffer.cpp
+++ b/src/opengl/qglpixelbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -89,8 +81,6 @@
 
     Pbuffers are provided by the OpenGL \c pbuffer extension; call
     hasOpenGLPbuffer() to find out if the system provides pbuffers.
-
-    \sa {Pixel Buffers Example}
 */
 
 #include <private/qopenglextensions_p.h>
@@ -124,7 +114,7 @@ void QGLPBufferGLPaintDevice::beginPaint()
 
 void QGLPBufferGLPaintDevice::endPaint()
 {
-    glFlush();
+    QOpenGLContext::currentContext()->functions()->glFlush();
     QGLPaintDevice::endPaint();
 }
 
@@ -235,7 +225,7 @@ bool QGLPixelBuffer::makeCurrent()
         d->fbo = new QOpenGLFramebufferObject(d->req_size, format);
         d->fbo->bind();
         d->glDevice.setFbo(d->fbo->handle());
-        glViewport(0, 0, d->req_size.width(), d->req_size.height());
+        QOpenGLContext::currentContext()->functions()->glViewport(0, 0, d->req_size.width(), d->req_size.height());
     }
     return true;
 }
@@ -338,7 +328,7 @@ void QGLPixelBuffer::updateDynamicTexture(GLuint texture_id) const
     if (d->invalid || !d->fbo)
         return;
 
-    QOpenGLContext *ctx = QOpenGLContext::currentContext();
+    const QGLContext *ctx = QGLContext::currentContext();
     if (!ctx)
         return;
 
@@ -352,19 +342,19 @@ void QGLPixelBuffer::updateDynamicTexture(GLuint texture_id) const
 #define GL_DRAW_FRAMEBUFFER 0x8CA9
 #endif
 
-    QOpenGLExtensions extensions(ctx);
+    QOpenGLExtensions extensions(ctx->contextHandle());
 
     if (d->blit_fbo) {
         QOpenGLFramebufferObject::blitFramebuffer(d->blit_fbo, d->fbo);
         extensions.glBindFramebuffer(GL_READ_FRAMEBUFFER, d->blit_fbo->handle());
     }
 
-    glBindTexture(GL_TEXTURE_2D, texture_id);
+    extensions.glBindTexture(GL_TEXTURE_2D, texture_id);
 #ifndef QT_OPENGL_ES
-    GLenum format = ctx->isOpenGLES() ? GL_RGBA : GL_RGBA8;
-    glCopyTexImage2D(GL_TEXTURE_2D, 0, format, 0, 0, d->req_size.width(), d->req_size.height(), 0);
+    GLenum format = ctx->contextHandle()->isOpenGLES() ? GL_RGBA : GL_RGBA8;
+    extensions.glCopyTexImage2D(GL_TEXTURE_2D, 0, format, 0, 0, d->req_size.width(), d->req_size.height(), 0);
 #else
-    glCopyTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, 0, 0, d->req_size.width(), d->req_size.height(), 0);
+    extensions.glCopyTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, 0, 0, d->req_size.width(), d->req_size.height(), 0);
 #endif
 
     if (d->blit_fbo)
@@ -629,17 +619,18 @@ GLuint QGLPixelBuffer::generateDynamicTexture() const
     }
 
     GLuint texture;
+    QOpenGLFunctions *funcs = QOpenGLContext::currentContext()->functions();
 
-    glGenTextures(1, &texture);
-    glBindTexture(GL_TEXTURE_2D, texture);
+    funcs->glGenTextures(1, &texture);
+    funcs->glBindTexture(GL_TEXTURE_2D, texture);
 
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
-    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
+    funcs->glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
 
-    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, d->req_size.width(), d->req_size.height(), 0,
-            GL_RGBA, GL_UNSIGNED_BYTE, 0);
+    funcs->glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, d->req_size.width(), d->req_size.height(), 0,
+                        GL_RGBA, GL_UNSIGNED_BYTE, 0);
 
     return texture;
 }
diff --git a/src/opengl/qglpixelbuffer.h b/src/opengl/qglpixelbuffer.h
index 1a2297da95..d4b88598af 100644
--- a/src/opengl/qglpixelbuffer.h
+++ b/src/opengl/qglpixelbuffer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglpixelbuffer_p.h b/src/opengl/qglpixelbuffer_p.h
index 77a1b768c2..336bd1addb 100644
--- a/src/opengl/qglpixelbuffer_p.h
+++ b/src/opengl/qglpixelbuffer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qglshaderprogram.cpp b/src/opengl/qglshaderprogram.cpp
index 6173ad1288..32140f06e6 100644
--- a/src/opengl/qglshaderprogram.cpp
+++ b/src/opengl/qglshaderprogram.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,7 +66,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet code/src_opengl_qglshaderprogram.cpp 0
 
-    \section1 Writing portable shaders
+    \section1 Writing Portable Shaders
 
     Shader programs can be difficult to reuse across OpenGL implementations
     because of varying levels of support for standard vertex attributes and
@@ -98,7 +90,7 @@ QT_BEGIN_NAMESPACE
     to just features that are present in GLSL/ES, and avoid
     standard variable names that only work on the desktop.
 
-    \section1 Simple shader example
+    \section1 Simple Shader Example
 
     \snippet code/src_opengl_qglshaderprogram.cpp 1
 
@@ -107,7 +99,7 @@ QT_BEGIN_NAMESPACE
 
     \snippet code/src_opengl_qglshaderprogram.cpp 2
 
-    \section1 Binary shaders and programs
+    \section1 Binary Shaders and Programs
 
     Binary shaders may be specified using \c{glShaderBinary()} on
     the return value from QGLShader::shaderId().  The QGLShader instance
@@ -3074,8 +3066,9 @@ int QGLShaderProgram::maxGeometryOutputVertices() const
 {
     GLint n = 0;
 #if !defined(QT_OPENGL_ES_2)
+    Q_D(const QGLShaderProgram);
     if (!QOpenGLContext::currentContext()->isOpenGLES())
-        glGetIntegerv(GL_MAX_GEOMETRY_OUTPUT_VERTICES_EXT, &n);
+        d->glfuncs->glGetIntegerv(GL_MAX_GEOMETRY_OUTPUT_VERTICES_EXT, &n);
 #endif
     return n;
 }
@@ -3229,7 +3222,7 @@ bool QGLShader::hasOpenGLShaders(ShaderType type, const QGLContext *context)
     if (!resolved)
         return false;
 
-    if ((type & Geometry) && !QByteArray((const char *) glGetString(GL_EXTENSIONS)).contains("GL_EXT_geometry_shader4"))
+    if ((type & Geometry) && !QByteArray((const char *) functions.glGetString(GL_EXTENSIONS)).contains("GL_EXT_geometry_shader4"))
         return false;
 
     return true;
diff --git a/src/opengl/qglshaderprogram.h b/src/opengl/qglshaderprogram.h
index 93f11e1826..4a87a835bf 100644
--- a/src/opengl/qglshaderprogram.h
+++ b/src/opengl/qglshaderprogram.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qgraphicsshadereffect.cpp b/src/opengl/qgraphicsshadereffect.cpp
index 736bf10f2e..928504ac73 100644
--- a/src/opengl/qgraphicsshadereffect.cpp
+++ b/src/opengl/qgraphicsshadereffect.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qgraphicsshadereffect_p.h b/src/opengl/qgraphicsshadereffect_p.h
index 3f879fc2d2..794a9177fd 100644
--- a/src/opengl/qgraphicsshadereffect_p.h
+++ b/src/opengl/qgraphicsshadereffect_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtOpenGL module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/opengl/qtopenglglobal.h b/src/opengl/qtopenglglobal.h
index bce329404f..8262b4c961 100644
--- a/src/opengl/qtopenglglobal.h
+++ b/src/opengl/qtopenglglobal.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformheaders/doc/qtplatformheaders.qdocconf b/src/platformheaders/doc/qtplatformheaders.qdocconf
new file mode 100644
index 0000000000..1c09971e23
--- /dev/null
+++ b/src/platformheaders/doc/qtplatformheaders.qdocconf
@@ -0,0 +1,38 @@
+include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
+
+project                 = QtPlatformHeaders
+description             = Qt Platform Headers Reference Documentation
+version                 = $QT_VERSION
+
+examplesinstallpath     = qtplatformheaders
+
+qhp.projects            = QtPlatformHeaders
+
+qhp.QtPlatformHeaders.file         = qtplatformheaders.qhp
+qhp.QtPlatformHeaders.namespace           = org.qt-project.qtplatformheaders.$QT_VERSION_TAG
+qhp.QtPlatformHeaders.virtualFolder       = qtplatformheaders
+qhp.QtPlatformHeaders.indexTitle          = Qt Platform Headers
+qhp.QtPlatformHeaders.indexRoot           =
+
+qhp.QtPlatformHeaders.filterAttributes    = qtplatformheaders $QT_VERSION qtrefdoc
+qhp.QtPlatformHeaders.customFilters.Qt.name = QtPlatformHeaders $QT_VERSION
+qhp.QtPlatformHeaders.customFilters.Qt.filterAttributes = qtplatformheaders $QT_VERSION
+
+qhp.QtPlatformHeaders.subprojects         = classes
+qhp.QtPlatformHeaders.subprojects.classes.title = C++ Classes
+qhp.QtPlatformHeaders.subprojects.classes.indexTitle = Qt Platform Headers C++ Classes
+qhp.QtPlatformHeaders.subprojects.classes.selectors = class fake:headerfile
+qhp.QtPlatformHeaders.subprojects.classes.sortPages = true
+
+depends += \
+    qtcore \
+    qtgui \
+    qtdoc
+
+headerdirs  += ..
+sourcedirs  += ..
+exampledirs += snippets
+imagedirs   += images
+
+navigation.landingpage = "Qt Platform Headers"
+navigation.cppclassespage = "Qt Platform Headers C++ Classes"
diff --git a/src/platformheaders/doc/snippets/qxcbwindowfunctions/main.cpp b/src/platformheaders/doc/snippets/qxcbwindowfunctions/main.cpp
new file mode 100644
index 0000000000..d4cb965bda
--- /dev/null
+++ b/src/platformheaders/doc/snippets/qxcbwindowfunctions/main.cpp
@@ -0,0 +1,61 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
+**     of its contributors may be used to endorse or promote products derived
+**     from this software without specific prior written permission.
+**
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QtWidgets>
+#include <QtPlatformHeaders/qxcbwindowfunctions.h>
+
+//! [0]
+int main(int argc, char **argv)
+{
+    QApplication app(argc, argv);
+
+    QPushButton topLevelWidget("Hello World!");
+    topLevelWidget.winId(); //have to create the QWindow
+
+    QWindow *tlwWindow = topLevelWidget.windowHandle();
+
+    QXcbWindowFunctions::setWmWindowType(tlwWindow, QXcbWindowFunctions::Dock);
+
+    topLevelWidget.show();
+
+    return app.exec();
+}
+//! [0]
+
diff --git a/src/platformheaders/doc/src/qtplatformheaders.qdoc b/src/platformheaders/doc/src/qtplatformheaders.qdoc
new file mode 100644
index 0000000000..94059e5508
--- /dev/null
+++ b/src/platformheaders/doc/src/qtplatformheaders.qdoc
@@ -0,0 +1,87 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \module QtPlatformHeaders
+    \title Qt Platform Headers C++ Classes
+    \ingroup modules
+
+    \brief The Qt Platform Headers module offers header-only inline classes that
+    encapsulate platform-specific information that is tied to a given runtime
+    configuration of a platform plugin.
+*/
+
+/*!
+    \page qtplatformheaders-index.html
+    \title Qt Platform Headers
+
+    \brief The Qt Platform Headers module offers header-only inline classes that
+    encapsulate platform-specific information that is tied to a given runtime
+    configuration of a platform plugin.
+
+    Some applications may need to interface Qt with other frameworks. This often
+    means using graphics contexts or other types of native handles created by
+    one framework with another. For example, on some platforms, QOpenGLContext
+    offers the ability to wrap an existing native OpenGL context, instead of
+    creating a new one. This existing native context can be created by some
+    other third-party code.
+
+    The type of such native handles is highly platform specific and in some
+    cases the platform plugin will need more information to adopt a handle, just
+    the handle in itself will not be sufficient. Therefore the public API
+    consists of functions taking or returning a QVariant that contains a
+    platform-specific value type. See for example
+    QOpenGLContext::setNativeHandle() and QOpenGLContext::nativeHandle(). When
+    running on Linux/X11, using the xcb platform plugin and the GLX windowing
+    system interface, the variant contains a QGLXNativeContext. On other
+    platforms a different class will be used. These classes are all placed in
+    the Qt Platform Headers module.
+
+    Platform headers can be used in conjunction with
+    QGuiApplication::platformFunction() to give a type safe interface to
+    platform specific functionality. It is possible for headers defined in
+    QtPlatformHeaders to define typedefs for functions that can be returned by
+    a platform plugin from QGuiApplication::platformFunction(). Headers in
+    QtPlatformHeaders can also implement wrapper functions for the function
+    pointer, giving a static function that can be called from any context after
+    the platform integration has been created. An implementation of this
+    pattern is QXcbWindowFunctions::setWmWindowType().  This function retrieves
+    a function pointer from QGuiApplication::platformFunction, and executes
+    that function if the requested function was returned.
+
+    \note Similar to the other QPA APIs, there are no binary compatibility
+    guarantees for these classes, meaning that an application using these
+    classes is only guaranteed to work with the Qt version it was developed
+    against. Unlike QPA however, source compatibility is guaranteed.
+
+    \sa QXcbWindowFunctions
+
+    \section1 API Reference
+    \list
+    \li \l{Qt Platform Headers C++ Classes}{C++ Classes}
+    \endlist
+ */
diff --git a/src/platformheaders/eglfsfunctions/eglfsfunctions.pri b/src/platformheaders/eglfsfunctions/eglfsfunctions.pri
new file mode 100644
index 0000000000..e4e645f5a5
--- /dev/null
+++ b/src/platformheaders/eglfsfunctions/eglfsfunctions.pri
@@ -0,0 +1 @@
+HEADERS += $$PWD/qeglfsfunctions.h
diff --git a/src/platformheaders/eglfsfunctions/qeglfsfunctions.h b/src/platformheaders/eglfsfunctions/qeglfsfunctions.h
new file mode 100644
index 0000000000..dcfb6c4630
--- /dev/null
+++ b/src/platformheaders/eglfsfunctions/qeglfsfunctions.h
@@ -0,0 +1,59 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QEGLFSFUNCTIONS_H
+#define QEGLFSFUNCTIONS_H
+
+#include <QtCore/QByteArray>
+#include <QtGui/QGuiApplication>
+
+QT_BEGIN_NAMESPACE
+
+class QEglFSFunctions
+{
+public:
+    typedef void (*LoadKeymapType)(const QString &filename);
+    static QByteArray loadKeymapTypeIdentifier() { return QByteArrayLiteral("EglFSLoadKeymap"); }
+
+    static void loadKeymap(const QString &filename)
+    {
+        LoadKeymapType func = reinterpret_cast<LoadKeymapType>(QGuiApplication::platformFunction(loadKeymapTypeIdentifier()));
+        if (func)
+            func(filename);
+    }
+};
+
+
+QT_END_NAMESPACE
+
+#endif // QEGLFSFUNCTIONS_H
diff --git a/src/platformheaders/eglfsfunctions/qeglfsfunctions.qdoc b/src/platformheaders/eglfsfunctions/qeglfsfunctions.qdoc
new file mode 100644
index 0000000000..b8dae9b13f
--- /dev/null
+++ b/src/platformheaders/eglfsfunctions/qeglfsfunctions.qdoc
@@ -0,0 +1,67 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \class QEglFSFunctions
+    \inmodule QtPlatformHeaders
+
+    \brief The QEglFSFunctions class is an inline class containing
+    platform-specific functionality for the eglfs platform plugin that is
+    typically used on systems running Embedded Linux or Android.
+
+    \note There is no binary compatibility guarantee for this class,
+    meaning that an application using it is only guaranteed to work with the Qt
+    version it was developed against.
+*/
+
+/*!
+    \typedef QEglFSFunctions::LoadKeymapType
+
+    Function type for loadKeymap.
+*/
+
+/*!
+    \fn QByteArray QEglFSFunctions::loadKeymapTypeIdentifier()
+
+    \return the identifier that can be passed to
+    QGuiApplication::platformFunction() to query the entry point for the
+    loadKeymap function implementation.
+*/
+
+/*!
+    \fn void QEglFSFunctions::loadKeymap(const QString &filename)
+
+    Loads and switches to the keymap from \a filename. When \a filename is
+    empty, the default keymap, which is either the built-on one or the keymap
+    given in the plugin specification, is restored.
+
+    \note This is functional only when the evdev keyboard support code is
+    compiled in to the platform plugin. When using external generic plugins via
+    the \c{-plugin} argument, or when the environment variable
+    \c{QT_QPA_EGLFS_DISABLE_INPUT} is set or when building Qt without evdev
+    support, this function will have no effect.
+*/
diff --git a/src/platformheaders/nativecontexts/nativecontexts.pri b/src/platformheaders/nativecontexts/nativecontexts.pri
new file mode 100644
index 0000000000..cfb190e4fa
--- /dev/null
+++ b/src/platformheaders/nativecontexts/nativecontexts.pri
@@ -0,0 +1,4 @@
+HEADERS += $$PWD/qglxnativecontext.h \
+           $$PWD/qeglnativecontext.h \
+           $$PWD/qcocoanativecontext.h \
+           $$PWD/qwglnativecontext.h
diff --git a/src/platformheaders/nativecontexts/qcocoanativecontext.h b/src/platformheaders/nativecontexts/qcocoanativecontext.h
new file mode 100644
index 0000000000..5cc1060c12
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qcocoanativecontext.h
@@ -0,0 +1,62 @@
+/****************************************************************************
+ **
+ ** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+ ** Contact: http://www.qt-project.org/legal
+ **
+ ** This file is part of the plugins of the Qt Toolkit.
+ **
+ ** $QT_BEGIN_LICENSE:LGPL21$
+ ** Commercial License Usage
+ ** Licensees holding valid commercial Qt licenses may use this file in
+ ** accordance with the commercial license agreement provided with the
+ ** Software or, alternatively, in accordance with the terms contained in
+ ** a written agreement between you and Digia. For licensing terms and
+ ** conditions see http://qt.digia.com/licensing. For further information
+ ** use the contact form at http://qt.digia.com/contact-us.
+ **
+ ** GNU Lesser General Public License Usage
+ ** Alternatively, this file may be used under the terms of the GNU Lesser
+ ** General Public License version 2.1 or version 3 as published by the Free
+ ** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+ ** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+ ** following information to ensure the GNU Lesser General Public License
+ ** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+ ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+ **
+ ** In addition, as a special exception, Digia gives you certain additional
+ ** rights. These rights are described in the Digia Qt LGPL Exception
+ ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+ **
+ ** $QT_END_LICENSE$
+ **
+ ****************************************************************************/
+
+#ifndef QCOCOANATIVECONTEXT_H
+#define QCOCOANATIVECONTEXT_H
+
+#include <QtCore/QMetaType>
+#include <AppKit/NSOpenGL.h>
+
+QT_BEGIN_NAMESPACE
+
+struct QCocoaNativeContext
+{
+    QCocoaNativeContext()
+        : m_context(0)
+    { }
+
+    QCocoaNativeContext(NSOpenGLContext *ctx)
+        : m_context(ctx)
+    { }
+
+    NSOpenGLContext *context() const { return m_context; }
+
+private:
+    NSOpenGLContext *m_context;
+};
+
+QT_END_NAMESPACE
+
+Q_DECLARE_METATYPE(QCocoaNativeContext)
+
+#endif // QCOCOANATIVECONTEXT_H
diff --git a/src/platformheaders/nativecontexts/qcocoanativecontext.qdoc b/src/platformheaders/nativecontexts/qcocoanativecontext.qdoc
new file mode 100644
index 0000000000..96b33ce5f8
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qcocoanativecontext.qdoc
@@ -0,0 +1,58 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+  \class QCocoaNativeContext
+  \inmodule QtPlatformHeaders
+  \since 5.4
+
+  \brief A class encapsulating a Cocoa NSOpenGLContext.
+
+  \note There is no binary compatibility guarantee for this class, meaning
+  that an application using it is only guaranteed to work with the Qt version it was
+  developed against.
+
+  \sa QOpenGLContext::setNativeHandle(), QOpenGLContext::nativeHandle()
+ */
+
+/*!
+  \fn NSOpenGLContext *QCocoaNativeContext::context() const
+
+  \return the context.
+ */
+
+/*!
+  \fn QCocoaNativeContext::QCocoaNativeContext()
+
+  Construct a new instance with no handles.
+ */
+
+/*!
+  \fn QCocoaNativeContext::QCocoaNativeContext(NSOpenGLContext *ctx)
+
+  Constructs a new instance with the provided \a ctx handle.
+ */
diff --git a/src/platformheaders/nativecontexts/qeglnativecontext.h b/src/platformheaders/nativecontexts/qeglnativecontext.h
new file mode 100644
index 0000000000..f5f4cb0df7
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qeglnativecontext.h
@@ -0,0 +1,66 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QEGLNATIVECONTEXT_H
+#define QEGLNATIVECONTEXT_H
+
+#include <QtCore/QMetaType>
+#include <EGL/egl.h>
+
+QT_BEGIN_NAMESPACE
+
+struct QEGLNativeContext
+{
+    QEGLNativeContext()
+        : m_context(0),
+          m_display(0)
+    { }
+
+    QEGLNativeContext(EGLContext ctx, EGLDisplay dpy)
+        : m_context(ctx),
+          m_display(dpy)
+    { }
+
+    EGLContext context() const { return m_context; }
+    EGLDisplay display() const { return m_display; }
+
+private:
+    EGLContext m_context;
+    EGLDisplay m_display;
+};
+
+QT_END_NAMESPACE
+
+Q_DECLARE_METATYPE(QEGLNativeContext)
+
+#endif // QEGLNATIVECONTEXT_H
diff --git a/src/platformheaders/nativecontexts/qeglnativecontext.qdoc b/src/platformheaders/nativecontexts/qeglnativecontext.qdoc
new file mode 100644
index 0000000000..edadbdfa83
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qeglnativecontext.qdoc
@@ -0,0 +1,64 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+  \class QEGLNativeContext
+  \inmodule QtPlatformHeaders
+  \since 5.4
+
+  \brief A class encapsulating an EGL context and display handle
+
+  \note There is no binary compatibility guarantee for this class, meaning
+  that an application using it is only guaranteed to work with the Qt version it was
+  developed against.
+
+  \sa QOpenGLContext::setNativeHandle(), QOpenGLContext::nativeHandle()
+ */
+
+/*!
+  \fn EGLContext QEGLNativeContext::context() const
+
+  \return the EGL context.
+ */
+
+/*!
+  \fn EGLDisplay QEGLNativeContext::display() const
+
+  \return the EGL display.
+ */
+
+/*!
+  \fn QEGLNativeContext::QEGLNativeContext()
+
+  Construct a new instance with no handles.
+ */
+
+/*!
+  \fn QEGLNativeContext::QEGLNativeContext(EGLContext ctx, EGLDisplay dpy)
+
+  Constructs a new instance with the provided \a ctx and \a dpy handles.
+ */
diff --git a/src/platformheaders/nativecontexts/qglxnativecontext.h b/src/platformheaders/nativecontexts/qglxnativecontext.h
new file mode 100644
index 0000000000..9d2b4ed67a
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qglxnativecontext.h
@@ -0,0 +1,75 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QGLXNATIVECONTEXT_H
+#define QGLXNATIVECONTEXT_H
+
+#include <QtCore/QMetaType>
+#include <X11/Xlib.h>
+#include <GL/glx.h>
+
+QT_BEGIN_NAMESPACE
+
+struct QGLXNativeContext
+{
+    QGLXNativeContext()
+        : m_context(0),
+          m_display(0),
+          m_window(0),
+          m_visualId(0)
+    { }
+
+    QGLXNativeContext(GLXContext ctx, Display *dpy = 0, Window wnd = 0, VisualID vid = 0)
+        : m_context(ctx),
+          m_display(dpy),
+          m_window(wnd),
+          m_visualId(vid)
+    { }
+
+    GLXContext context() const { return m_context; }
+    Display *display() const { return m_display; }
+    Window window() const { return m_window; }
+    VisualID visualId() const { return m_visualId; }
+
+private:
+    GLXContext m_context;
+    Display *m_display;
+    Window m_window;
+    VisualID m_visualId;
+};
+
+QT_END_NAMESPACE
+
+Q_DECLARE_METATYPE(QGLXNativeContext)
+
+#endif // QGLXNATIVECONTEXT_H
diff --git a/src/platformheaders/nativecontexts/qglxnativecontext.qdoc b/src/platformheaders/nativecontexts/qglxnativecontext.qdoc
new file mode 100644
index 0000000000..81f3c0b2ca
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qglxnativecontext.qdoc
@@ -0,0 +1,83 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+  \class QGLXNativeContext
+  \inmodule QtPlatformHeaders
+  \since 5.4
+
+  \brief A class encapsulating a GLXContext and related native handles.
+
+  \note Only context() is guaranteed to be valid. The other handles may be all \c 0. They are
+  useful however when QOpenGLContext::setNativeHandle() is used to adopt a legacy context
+  created by glXCreateContext. To adopt such a context, either the Window or VisualID
+  that had been used to create the context needs to be known, otherwise the adoption will
+  fail. For modern contexts created with an FBConfig, these are not necessary, the
+  GLXContext itself is sufficient. The Display is optional.
+
+  \note There is no binary compatibility guarantee for this class, meaning
+  that an application using it is only guaranteed to work with the Qt version it was
+  developed against.
+
+  \sa QOpenGLContext::setNativeHandle(), QOpenGLContext::nativeHandle()
+ */
+
+/*!
+  \fn GLXContext QGLXNativeContext::context() const
+
+  \return the GLXContext.
+ */
+
+/*!
+  \fn Display *QGLXNativeContext::display() const
+
+  \return a pointer to the X11 display or \c NULL if not available.
+ */
+
+/*!
+  \fn Window QGLXNativeContext::window() const
+
+  \return the X11 Window or \c 0 if not available.
+ */
+
+/*!
+  \fn VisualID QGLXNativeContext::visualId() const
+
+  \return the X11 visual ID or \c 0 if not available.
+ */
+
+/*!
+  \fn QGLXNativeContext::QGLXNativeContext()
+
+  Construct a new instance with no handles.
+ */
+
+/*!
+  \fn QGLXNativeContext::QGLXNativeContext(GLXContext ctx, Display *dpy = 0, Window wnd = 0, VisualID vid = 0)
+
+  Constructs a new instance with the provided \a ctx, \a dpy, \a wnd, \a vid handles.
+ */
diff --git a/src/platformheaders/nativecontexts/qwglnativecontext.h b/src/platformheaders/nativecontexts/qwglnativecontext.h
new file mode 100644
index 0000000000..2e2eb415e8
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qwglnativecontext.h
@@ -0,0 +1,68 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWGLNATIVECONTEXT_H
+#define QWGLNATIVECONTEXT_H
+
+#include <QtCore/QMetaType>
+#include <wingdi.h>
+#include <GL/gl.h>
+
+QT_BEGIN_NAMESPACE
+
+class QWGLNativeContext
+{
+public:
+    QWGLNativeContext()
+        : m_context(0),
+          m_window(0)
+    { }
+
+    QWGLNativeContext(HGLRC ctx, HWND wnd)
+        : m_context(ctx),
+          m_window(wnd)
+    { }
+
+    HGLRC context() const { return m_context; }
+    HWND window() const { return m_window; }
+
+private:
+    HGLRC m_context;
+    HWND m_window;
+};
+
+QT_END_NAMESPACE
+
+Q_DECLARE_METATYPE(QWGLNativeContext)
+
+#endif // QWGLNATIVECONTEXT_H
diff --git a/src/platformheaders/nativecontexts/qwglnativecontext.qdoc b/src/platformheaders/nativecontexts/qwglnativecontext.qdoc
new file mode 100644
index 0000000000..86ae291aaa
--- /dev/null
+++ b/src/platformheaders/nativecontexts/qwglnativecontext.qdoc
@@ -0,0 +1,131 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+  \class QWGLNativeContext
+  \inmodule QtPlatformHeaders
+  \since 5.4
+
+  \brief A class encapsulating a WGL context on Windows with desktop OpenGL (opengl32.dll)
+
+  \note There is no binary compatibility guarantee for this class,
+  meaning that an application using it is only guaranteed to work with the Qt
+  version it was developed against.
+
+  QWGLNativeContext is a value class that can be passed to
+  QOpenGLContext::setNativeHandle(). When creating a QOpenGLContext with the
+  native handle set, no new context will get created. Instead, the provided
+  handles are used, without taking ownership. This allows wrapping a context
+  created by an external framework or rendering engine. The typical usage will
+  be similar to the following snippet:
+
+  \code
+      #include <QtPlatformSupport/QWGLNativeContext>
+      ...create and retrieve the WGL context and the corresponding window...
+      QOpenGLContext *context = new QOpenGLContext;
+      QWGLNativeContext nativeContext(hglrc, hwnd);
+      context->setNativeHandle(QVariant::fromValue(nativeContext));
+      context->create();
+      ...
+  \endcode
+
+  The window is needed because the its pixel format will be queried. When the
+  adoption is successful, QOpenGLContext::format() will return a QSurfaceFormat
+  describing this pixel format.
+
+  It is recommended to restrict the usage of QOpenGLContexts created this way.
+  Various platform-specific behavior and issues may prevent such contexts to be
+  made current with windows (surfaces) created by Qt due to non-matching pixel
+  formats for example. A potentially safer solution is to use the wrapped
+  context only to set up sharing and perform Qt-based rendering offscreen,
+  using a separate, dedicated QOpenGLContext. The resulting textures are then
+  accessible in the foreign context too.
+
+  \code
+      ...like above...
+      QOpenGLContext *qtcontext = new QOpenGLContext;
+      qtcontext->setShareContext(context);
+      qtcontext->setFormat(context->format());
+      qtcontext->create();
+      ...use qtcontext for rendering with Qt...
+  \endcode
+
+  In addition to being used with QOpenGLContext::setNativeHandle(), this class
+  is used also to retrieve the native context handle, that is, a HGLRC value,
+  from a QOpenGLContext. Calling QOpenGLContext::nativeHandle() returns a
+  QVariant which, on Windows with opengl32.dll at least, will contain a
+  QWGLNativeContext:
+
+  \code
+      QVariant nativeHandle = context->nativeHandle();
+      if (!nativeHandle.isNull() && nativeHandle.canConvert<QWGLNativeContext>()) {
+          QWGLNativeContext nativeContext = nativeHandle.value<QWGLNativeContext>();
+          HGLRC hglrc = nativeContext.context();
+          ...
+      }
+  \endcode
+
+  \sa QOpenGLContext::setNativeHandle(), QOpenGLContext::nativeHandle()
+ */
+
+/*!
+  \fn HGLRC QWGLNativeContext::context() const
+
+  \return the WGL context.
+ */
+
+/*!
+  \fn HWND QWGLNativeContext::window() const
+
+  \note The window handle is not available when the QWGLNativeContext is
+  queried from a regular, non-adopted QOpenGLContext using
+  QOpenGLContext::nativeHandle(). This is because the \e windows platform
+  plugin creates WGL contexts using a dummy window that is not available
+  afterwards. Instead, the native window handle (HWND) is queriable from a
+  QWindow via QPlatformNativeInterface::nativeResourceForWindow() using the \e
+  "handle" resource key. Note however that the window will not have its pixel
+  format set until it is first associated with a context via
+  QOpenGLContext::makeCurrent().
+
+  \return handle for the window for which the context was created.
+ */
+
+/*!
+  \fn QWGLNativeContext::QWGLNativeContext()
+
+  Construct a new instance with no handles.
+ */
+
+/*!
+  \fn QWGLNativeContext::QWGLNativeContext(HGLRC ctx, HWND wnd)
+
+  Constructs a new instance with the provided \a ctx context handle and \a wnd window handle.
+
+  \note The window specified by \a wnd must have its pixel format set to a
+  format compatible with the context's. If no SetPixelFormat() call was made on
+  any device context belonging to the window, adopting the context will fail.
+ */
diff --git a/src/platformheaders/platformheaders.pro b/src/platformheaders/platformheaders.pro
new file mode 100644
index 0000000000..a3132ecf23
--- /dev/null
+++ b/src/platformheaders/platformheaders.pro
@@ -0,0 +1,14 @@
+# Only headers here, no library is wanted.
+TEMPLATE = subdirs
+VERSION = $$MODULE_VERSION
+MODULE_INCNAME = QtPlatformHeaders
+
+include(nativecontexts/nativecontexts.pri)
+include(xcbfunctions/xcbfunctions.pri)
+include(eglfsfunctions/eglfsfunctions.pri)
+
+QMAKE_DOCS = $$PWD/doc/qtplatformheaders.qdocconf
+
+load(qt_module_headers)
+load(qt_docs)
+load(qt_installs)
diff --git a/src/platformheaders/xcbfunctions/qxcbwindowfunctions.h b/src/platformheaders/xcbfunctions/qxcbwindowfunctions.h
new file mode 100644
index 0000000000..52277325dc
--- /dev/null
+++ b/src/platformheaders/xcbfunctions/qxcbwindowfunctions.h
@@ -0,0 +1,80 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QXCBWINDOWFUNCTIONS_H
+#define QXCBWINDOWFUNCTIONS_H
+
+#include <QtCore/QByteArray>
+#include <QtGui/QGuiApplication>
+
+QT_BEGIN_NAMESPACE
+
+class QWindow;
+
+class QXcbWindowFunctions {
+public:
+    enum WmWindowType {
+        Normal       = 0x000001,
+        Desktop      = 0x000002,
+        Dock         = 0x000004,
+        Toolbar      = 0x000008,
+        Menu         = 0x000010,
+        Utility      = 0x000020,
+        Splash       = 0x000040,
+        Dialog       = 0x000080,
+        DropDownMenu = 0x000100,
+        PopupMenu    = 0x000200,
+        Tooltip      = 0x000400,
+        Notification = 0x000800,
+        Combo        = 0x001000,
+        Dnd          = 0x002000,
+        KdeOverride  = 0x004000
+    };
+
+    Q_DECLARE_FLAGS(WmWindowTypes, WmWindowType)
+
+    typedef void (*SetWmWindowType)(QWindow *window, QXcbWindowFunctions::WmWindowTypes windowType);
+    static const QByteArray setWmWindowTypeIdentifier() { return QByteArrayLiteral("XcbSetWmWindowType"); }
+
+    static void setWmWindowType(QWindow *window, WmWindowType type)
+    {
+        SetWmWindowType func = reinterpret_cast<SetWmWindowType>(QGuiApplication::platformFunction(setWmWindowTypeIdentifier()));
+        if (func)
+            func(window, type);
+    }
+};
+
+
+QT_END_NAMESPACE
+
+#endif // QXCBWINDOWFUNCTIONS_H
diff --git a/src/platformheaders/xcbfunctions/qxcbwindowfunctions.qdoc b/src/platformheaders/xcbfunctions/qxcbwindowfunctions.qdoc
new file mode 100644
index 0000000000..458dbb213d
--- /dev/null
+++ b/src/platformheaders/xcbfunctions/qxcbwindowfunctions.qdoc
@@ -0,0 +1,83 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:FDL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file.  Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: http://www.gnu.org/copyleft/fdl.html.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \class QXcbWindowFunctions
+    \inmodule QtPlatformHeaders
+
+    \brief The QXcbWindowFunctions class is an inline class containing
+    miscellaneous functionality for xcb window specific functionality.
+
+    A commen usage pattern is as follows:
+    \snippet qxcbwindowfunctions/main.cpp 0
+
+    \note There is no binary compatibility guarantee for this class,
+    meaning that an application using it is only guaranteed to work with the Qt
+    version it was developed against.
+*/
+
+/*!
+    \enum QXcbWindowFunctions::WmWindowType
+
+    This enum represents the supported WM_WINDOW_TYPE atoms.
+
+    \value Normal
+    \value Desktop
+    \value Dock
+    \value Toolbar
+    \value Menu
+    \value Utility
+    \value Splash
+    \value Dialog
+    \value DropDownMenu
+    \value PopupMenu
+    \value Tooltip
+    \value Notification
+    \value Combo
+    \value Dnd
+    \value KdeOverride
+*/
+
+/*!
+    \typedef QXcbWindowFunctions::SetWmWindowType
+
+    This is the typedef for the function returned by QGuiApplication::platformFunction when passed setWmWindowTypeIdentifier.
+*/
+
+/*!
+    \fn QByteArray QXcbWindowFunctions::setWmWindowTypeIdentifier()
+
+    This function returnes the bytearray that can be used to query
+    QGuiApplication::platformFunction to retrieve the SetWmWindowType function.
+*/
+
+/*!
+    \fn void QXcbWindowFunctions::setWmWindowType(QWindow *window, WmWindowType type)
+
+    This is a convenience function that can be used directly instead of resolving the function pointer.
+    \a window and \a type will be relayed to the function retrieved by QGuiApplication
+*/
diff --git a/src/platformheaders/xcbfunctions/xcbfunctions.pri b/src/platformheaders/xcbfunctions/xcbfunctions.pri
new file mode 100644
index 0000000000..8844913cd1
--- /dev/null
+++ b/src/platformheaders/xcbfunctions/xcbfunctions.pri
@@ -0,0 +1 @@
+HEADERS += $$PWD/qxcbwindowfunctions.h
diff --git a/src/platformsupport/accessibility/accessibility.pri b/src/platformsupport/accessibility/accessibility.pri
new file mode 100644
index 0000000000..fb56edbf1a
--- /dev/null
+++ b/src/platformsupport/accessibility/accessibility.pri
@@ -0,0 +1,9 @@
+contains(QT_CONFIG, accessibility) {
+    INCLUDEPATH += $$PWD
+
+    HEADERS += \
+        $$PWD/qaccessiblebridgeutils_p.h
+
+    SOURCES += \
+        $$PWD/qaccessiblebridgeutils.cpp
+}
diff --git a/src/platformsupport/accessibility/qaccessiblebridgeutils.cpp b/src/platformsupport/accessibility/qaccessiblebridgeutils.cpp
new file mode 100644
index 0000000000..3021e84597
--- /dev/null
+++ b/src/platformsupport/accessibility/qaccessiblebridgeutils.cpp
@@ -0,0 +1,111 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+#include "qaccessiblebridgeutils_p.h"
+#include <QtCore/qmath.h>
+
+#ifndef QT_NO_ACCESSIBILITY
+
+QT_BEGIN_NAMESPACE
+
+namespace QAccessibleBridgeUtils {
+
+static bool performAction(QAccessibleInterface *iface, const QString &actionName)
+{
+    if (QAccessibleActionInterface *actionIface = iface->actionInterface()) {
+        if (actionIface->actionNames().contains(actionName)) {
+            actionIface->doAction(actionName);
+            return true;
+        }
+    }
+    return false;
+}
+
+QStringList effectiveActionNames(QAccessibleInterface *iface)
+{
+    QStringList actions;
+    if (QAccessibleActionInterface *actionIface = iface->actionInterface())
+        actions = actionIface->actionNames();
+
+    if (iface->valueInterface()) {
+        if (!actions.contains(QAccessibleActionInterface::increaseAction()))
+            actions << QAccessibleActionInterface::increaseAction();
+        if (!actions.contains(QAccessibleActionInterface::decreaseAction()))
+            actions << QAccessibleActionInterface::decreaseAction();
+    }
+    return actions;
+}
+
+bool performEffectiveAction(QAccessibleInterface *iface, const QString &actionName)
+{
+    if (!iface)
+        return false;
+    if (performAction(iface, actionName))
+        return true;
+    if (actionName != QAccessibleActionInterface::increaseAction()
+        && actionName != QAccessibleActionInterface::decreaseAction())
+        return false;
+
+    QAccessibleValueInterface *valueIface = iface->valueInterface();
+    if (!valueIface)
+        return false;
+    bool success;
+    const QVariant currentVariant = valueIface->currentValue();
+    double stepSize = valueIface->minimumStepSize().toDouble(&success);
+    if (!success || qFuzzyIsNull(stepSize)) {
+        const double min = valueIface->minimumValue().toDouble(&success);
+        if (!success)
+            return false;
+        const double max = valueIface->maximumValue().toDouble(&success);
+        if (!success)
+            return false;
+        stepSize = (max - min) / 10;  // this is pretty arbitrary, we just need to provide something
+        const int typ = currentVariant.type();
+        if (typ != QMetaType::Float && typ != QMetaType::Double) {
+            // currentValue is an integer. Round it up to ensure stepping in case it was below 1
+            stepSize = qCeil(stepSize);
+        }
+    }
+    const double current = currentVariant.toDouble(&success);
+    if (!success)
+        return false;
+    if (actionName == QAccessibleActionInterface::decreaseAction())
+        stepSize = -stepSize;
+    valueIface->setCurrentValue(current + stepSize);
+    return true;
+}
+
+}   //namespace
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/platformsupport/accessibility/qaccessiblebridgeutils_p.h b/src/platformsupport/accessibility/qaccessiblebridgeutils_p.h
new file mode 100644
index 0000000000..bce2f90a09
--- /dev/null
+++ b/src/platformsupport/accessibility/qaccessiblebridgeutils_p.h
@@ -0,0 +1,53 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QACCESSIBLEBRIDGEUTILS_H
+#define QACCESSIBLEBRIDGEUTILS_H
+
+#ifndef QT_NO_ACCESSIBILITY
+
+#include <QtCore/qstringlist.h>
+#include <QtGui/qaccessible.h>
+
+QT_BEGIN_NAMESPACE
+
+namespace QAccessibleBridgeUtils {
+    QStringList effectiveActionNames(QAccessibleInterface *iface);
+    bool performEffectiveAction(QAccessibleInterface *iface, const QString &actionName);
+}
+
+QT_END_NAMESPACE
+
+#endif
+
+#endif //QACCESSIBLEBRIDGEUTILS_H
diff --git a/src/platformsupport/cfsocketnotifier/qcfsocketnotifier.cpp b/src/platformsupport/cfsocketnotifier/qcfsocketnotifier.cpp
index c33b684d50..e508f9728b 100644
--- a/src/platformsupport/cfsocketnotifier/qcfsocketnotifier.cpp
+++ b/src/platformsupport/cfsocketnotifier/qcfsocketnotifier.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/cfsocketnotifier/qcfsocketnotifier_p.h b/src/platformsupport/cfsocketnotifier/qcfsocketnotifier_p.h
index dcd1b12ad7..cf9f26b35d 100644
--- a/src/platformsupport/cfsocketnotifier/qcfsocketnotifier_p.h
+++ b/src/platformsupport/cfsocketnotifier/qcfsocketnotifier_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/cglconvenience/cglconvenience_p.h b/src/platformsupport/cglconvenience/cglconvenience_p.h
index 674753d878..d24d7fb761 100644
--- a/src/platformsupport/cglconvenience/cglconvenience_p.h
+++ b/src/platformsupport/cglconvenience/cglconvenience_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/clipboard/qmacmime_p.h b/src/platformsupport/clipboard/qmacmime_p.h
index 6bdb90232c..df5b771780 100644
--- a/src/platformsupport/clipboard/qmacmime_p.h
+++ b/src/platformsupport/clipboard/qmacmime_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/devicediscovery/qdevicediscovery_dummy.cpp b/src/platformsupport/devicediscovery/qdevicediscovery_dummy.cpp
index 53e042272b..c6b8610bab 100644
--- a/src/platformsupport/devicediscovery/qdevicediscovery_dummy.cpp
+++ b/src/platformsupport/devicediscovery/qdevicediscovery_dummy.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/devicediscovery/qdevicediscovery_p.h b/src/platformsupport/devicediscovery/qdevicediscovery_p.h
index fd44cdd8da..07e7996a60 100644
--- a/src/platformsupport/devicediscovery/qdevicediscovery_p.h
+++ b/src/platformsupport/devicediscovery/qdevicediscovery_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/devicediscovery/qdevicediscovery_static.cpp b/src/platformsupport/devicediscovery/qdevicediscovery_static.cpp
index cbcc0ff5b1..eb7c17d59e 100644
--- a/src/platformsupport/devicediscovery/qdevicediscovery_static.cpp
+++ b/src/platformsupport/devicediscovery/qdevicediscovery_static.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/devicediscovery/qdevicediscovery_udev.cpp b/src/platformsupport/devicediscovery/qdevicediscovery_udev.cpp
index 8a0a0f43ac..006b18552e 100644
--- a/src/platformsupport/devicediscovery/qdevicediscovery_udev.cpp
+++ b/src/platformsupport/devicediscovery/qdevicediscovery_udev.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/eglconvenience.pri b/src/platformsupport/eglconvenience/eglconvenience.pri
index 7600cc952b..8ada53d2c1 100644
--- a/src/platformsupport/eglconvenience/eglconvenience.pri
+++ b/src/platformsupport/eglconvenience/eglconvenience.pri
@@ -40,15 +40,4 @@ contains(QT_CONFIG,egl) {
             $$PWD/qxlibeglintegration.cpp
     }
     CONFIG += egl
-
-} else: contains(QT_CONFIG,dynamicgl) {
-    HEADERS += \
-        $$PWD/qeglconvenience_p.h \
-        $$PWD/qeglplatformcontext_p.h \
-        $$PWD/qeglpbuffer_p.h
-
-    SOURCES += \
-        $$PWD/qeglconvenience.cpp \
-        $$PWD/qeglplatformcontext.cpp \
-        $$PWD/qeglpbuffer.cpp
 }
diff --git a/src/platformsupport/eglconvenience/qeglcompositor.cpp b/src/platformsupport/eglconvenience/qeglcompositor.cpp
index 0e0a2d9375..5866edc48d 100644
--- a/src/platformsupport/eglconvenience/qeglcompositor.cpp
+++ b/src/platformsupport/eglconvenience/qeglcompositor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -105,6 +97,29 @@ void QEGLCompositor::renderAll()
         windows.at(i)->composited();
 }
 
+struct BlendStateBinder
+{
+    BlendStateBinder() : m_blend(false) {
+        glDisable(GL_BLEND);
+    }
+    void set(bool blend) {
+        if (blend != m_blend) {
+            if (blend) {
+                glEnable(GL_BLEND);
+                glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+            } else {
+                glDisable(GL_BLEND);
+            }
+            m_blend = blend;
+        }
+    }
+    ~BlendStateBinder() {
+        if (m_blend)
+            glDisable(GL_BLEND);
+    }
+    bool m_blend;
+};
+
 void QEGLCompositor::render(QEGLPlatformWindow *window)
 {
     const QPlatformTextureList *textures = window->textures();
@@ -114,29 +129,44 @@ void QEGLCompositor::render(QEGLPlatformWindow *window)
     const QRect targetWindowRect(QPoint(0, 0), window->screen()->geometry().size());
     glViewport(0, 0, targetWindowRect.width(), targetWindowRect.height());
 
+    float currentOpacity = 1.0f;
+    BlendStateBinder blend;
+
     for (int i = 0; i < textures->count(); ++i) {
         uint textureId = textures->textureId(i);
-        glBindTexture(GL_TEXTURE_2D, textureId);
         QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(textures->geometry(i),
                                                                    targetWindowRect);
+        const float opacity = window->window()->opacity();
+        if (opacity != currentOpacity) {
+            currentOpacity = opacity;
+            m_blitter->setOpacity(currentOpacity);
+        }
 
         if (textures->count() > 1 && i == textures->count() - 1) {
             // Backingstore for a widget with QOpenGLWidget subwidgets
-            m_blitter->setSwizzleRB(true);
-            glEnable(GL_BLEND);
-            glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+            blend.set(true);
             m_blitter->blit(textureId, target, QOpenGLTextureBlitter::OriginTopLeft);
-            glDisable(GL_BLEND);
         } else if (textures->count() == 1) {
             // A regular QWidget window
-            m_blitter->setSwizzleRB(true);
+            const bool translucent = window->window()->requestedFormat().alphaBufferSize() > 0;
+            blend.set(translucent);
             m_blitter->blit(textureId, target, QOpenGLTextureBlitter::OriginTopLeft);
-        } else {
+        } else if (!textures->stacksOnTop(i)) {
             // Texture from an FBO belonging to a QOpenGLWidget
-            m_blitter->setSwizzleRB(false);
+            blend.set(false);
             m_blitter->blit(textureId, target, QOpenGLTextureBlitter::OriginBottomLeft);
         }
     }
+
+    for (int i = 0; i < textures->count(); ++i) {
+        if (textures->stacksOnTop(i)) {
+            QMatrix4x4 target = QOpenGLTextureBlitter::targetTransform(textures->geometry(i), targetWindowRect);
+            blend.set(true);
+            m_blitter->blit(textures->textureId(i), target, QOpenGLTextureBlitter::OriginBottomLeft);
+        }
+    }
+
+    m_blitter->setOpacity(1.0f);
 }
 
 QEGLCompositor *QEGLCompositor::instance()
diff --git a/src/platformsupport/eglconvenience/qeglcompositor_p.h b/src/platformsupport/eglconvenience/qeglcompositor_p.h
index 2e0a3adaf3..1401fbdd55 100644
--- a/src/platformsupport/eglconvenience/qeglcompositor_p.h
+++ b/src/platformsupport/eglconvenience/qeglcompositor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglconvenience.cpp b/src/platformsupport/eglconvenience/qeglconvenience.cpp
index 5eed47050f..b7ce6dfaf3 100644
--- a/src/platformsupport/eglconvenience/qeglconvenience.cpp
+++ b/src/platformsupport/eglconvenience/qeglconvenience.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglconvenience_p.h b/src/platformsupport/eglconvenience/qeglconvenience_p.h
index 41d392e43a..52c2b861f9 100644
--- a/src/platformsupport/eglconvenience/qeglconvenience_p.h
+++ b/src/platformsupport/eglconvenience/qeglconvenience_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglpbuffer.cpp b/src/platformsupport/eglconvenience/qeglpbuffer.cpp
index 295f8756c4..2c6c332ac9 100644
--- a/src/platformsupport/eglconvenience/qeglpbuffer.cpp
+++ b/src/platformsupport/eglconvenience/qeglpbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglpbuffer_p.h b/src/platformsupport/eglconvenience/qeglpbuffer_p.h
index 92d89198a4..0995b6d443 100644
--- a/src/platformsupport/eglconvenience/qeglpbuffer_p.h
+++ b/src/platformsupport/eglconvenience/qeglpbuffer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglplatformbackingstore.cpp b/src/platformsupport/eglconvenience/qeglplatformbackingstore.cpp
index ab92bac37d..43c18573f2 100644
--- a/src/platformsupport/eglconvenience/qeglplatformbackingstore.cpp
+++ b/src/platformsupport/eglconvenience/qeglplatformbackingstore.cpp
@@ -1,46 +1,39 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include <QtGui/QOpenGLShaderProgram>
 #include <QtGui/QOpenGLContext>
+#include <QtGui/QPainter>
 
 #include "qeglplatformbackingstore_p.h"
 #include "qeglcompositor_p.h"
@@ -164,13 +157,15 @@ void QEGLPlatformBackingStore::flush(QWindow *window, const QRegion &region, con
 }
 
 void QEGLPlatformBackingStore::composeAndFlush(QWindow *window, const QRegion &region, const QPoint &offset,
-                                               QPlatformTextureList *textures, QOpenGLContext *context)
+                                               QPlatformTextureList *textures, QOpenGLContext *context,
+                                               bool translucentBackground)
 {
     // QOpenGLWidget content provided as textures. The raster content should go on top.
 
     Q_UNUSED(region);
     Q_UNUSED(offset);
     Q_UNUSED(context);
+    Q_UNUSED(translucentBackground);
 
     QEGLPlatformScreen *screen = static_cast<QEGLPlatformScreen *>(m_window->screen());
     QEGLPlatformWindow *dstWin = screen->compositingWindow();
@@ -180,11 +175,8 @@ void QEGLPlatformBackingStore::composeAndFlush(QWindow *window, const QRegion &r
     screen->compositingContext()->makeCurrent(dstWin->window());
 
     m_textures->clear();
-    for (int i = 0; i < textures->count(); ++i) {
-        uint textureId = textures->textureId(i);
-        QRect geom = textures->geometry(i);
-        m_textures->appendTexture(textureId, geom);
-    }
+    for (int i = 0; i < textures->count(); ++i)
+        m_textures->appendTexture(textures->textureId(i), textures->geometry(i), textures->stacksOnTop(i));
 
     updateTexture();
     m_textures->appendTexture(m_bsTexture, window->geometry());
@@ -209,9 +201,16 @@ void QEGLPlatformBackingStore::composited()
     }
 }
 
-void QEGLPlatformBackingStore::beginPaint(const QRegion &rgn)
+void QEGLPlatformBackingStore::beginPaint(const QRegion &region)
 {
-    m_dirty |= rgn;
+    m_dirty |= region;
+
+    if (m_image.hasAlphaChannel()) {
+        QPainter p(&m_image);
+        p.setCompositionMode(QPainter::CompositionMode_Source);
+        foreach (const QRect &r, region.rects())
+            p.fillRect(r, Qt::transparent);
+    }
 }
 
 void QEGLPlatformBackingStore::resize(const QSize &size, const QRegion &staticContents)
@@ -223,7 +222,8 @@ void QEGLPlatformBackingStore::resize(const QSize &size, const QRegion &staticCo
     if (!dstWin || (!dstWin->isRaster() && dstWin->window()->surfaceType() != QSurface::RasterGLSurface))
         return;
 
-    m_image = QImage(size, QImage::Format_RGB32);
+    m_image = QImage(size, QImage::Format_RGBA8888);
+
     m_window->create();
 
     screen->compositingContext()->makeCurrent(dstWin->window());
diff --git a/src/platformsupport/eglconvenience/qeglplatformbackingstore_p.h b/src/platformsupport/eglconvenience/qeglplatformbackingstore_p.h
index 57c632a4c5..502ca5a639 100644
--- a/src/platformsupport/eglconvenience/qeglplatformbackingstore_p.h
+++ b/src/platformsupport/eglconvenience/qeglplatformbackingstore_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -72,14 +64,15 @@ public:
 
     QPaintDevice *paintDevice() Q_DECL_OVERRIDE;
 
-    void beginPaint(const QRegion &) Q_DECL_OVERRIDE;
+    void beginPaint(const QRegion &region) Q_DECL_OVERRIDE;
 
     void flush(QWindow *window, const QRegion &region, const QPoint &offset) Q_DECL_OVERRIDE;
     void resize(const QSize &size, const QRegion &staticContents) Q_DECL_OVERRIDE;
 
     QImage toImage() const Q_DECL_OVERRIDE;
     void composeAndFlush(QWindow *window, const QRegion &region, const QPoint &offset,
-                         QPlatformTextureList *textures, QOpenGLContext *context) Q_DECL_OVERRIDE;
+                         QPlatformTextureList *textures, QOpenGLContext *context,
+                         bool translucentBackground) Q_DECL_OVERRIDE;
 
     const QPlatformTextureList *textures() const { return m_textures; }
 
diff --git a/src/platformsupport/eglconvenience/qeglplatformcontext.cpp b/src/platformsupport/eglconvenience/qeglplatformcontext.cpp
index eec6463c21..7cc330092e 100644
--- a/src/platformsupport/eglconvenience/qeglplatformcontext.cpp
+++ b/src/platformsupport/eglconvenience/qeglplatformcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 #include "qeglpbuffer_p.h"
 #include <qpa/qplatformwindow.h>
 #include <QOpenGLContext>
+#include <QtPlatformHeaders/QEGLNativeContext>
 #include <QDebug>
 
 QT_BEGIN_NAMESPACE
@@ -108,25 +101,21 @@ QT_BEGIN_NAMESPACE
 #define GL_CONTEXT_COMPATIBILITY_PROFILE_BIT 0x00000002
 #endif
 
-QEGLPlatformContext::QEGLPlatformContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display)
-    : m_eglDisplay(display)
-    , m_eglConfig(q_configFromGLFormat(display, format))
-    , m_swapInterval(-1)
-    , m_swapIntervalEnvChecked(false)
-    , m_swapIntervalFromEnv(-1)
-{
-    init(format, share);
-}
-
 QEGLPlatformContext::QEGLPlatformContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display,
-                                         EGLConfig config)
+                                         EGLConfig *config, const QVariant &nativeHandle)
     : m_eglDisplay(display)
-    , m_eglConfig(config)
     , m_swapInterval(-1)
     , m_swapIntervalEnvChecked(false)
     , m_swapIntervalFromEnv(-1)
 {
-    init(format, share);
+    if (nativeHandle.isNull()) {
+        m_eglConfig = config ? *config : q_configFromGLFormat(display, format);
+        m_ownsContext = true;
+        init(format, share);
+    } else {
+        m_ownsContext = false;
+        adopt(nativeHandle, share);
+    }
 }
 
 void QEGLPlatformContext::init(const QSurfaceFormat &format, QPlatformOpenGLContext *share)
@@ -198,7 +187,69 @@ void QEGLPlatformContext::init(const QSurfaceFormat &format, QPlatformOpenGLCont
         q_printEglConfig(m_eglDisplay, m_eglConfig);
     }
 
+    updateFormatFromGL();
+}
+
+void QEGLPlatformContext::adopt(const QVariant &nativeHandle, QPlatformOpenGLContext *share)
+{
+    if (!nativeHandle.canConvert<QEGLNativeContext>()) {
+        qWarning("QEGLPlatformContext: Requires a QEGLNativeContext");
+        return;
+    }
+    QEGLNativeContext handle = nativeHandle.value<QEGLNativeContext>();
+    EGLContext context = handle.context();
+    if (!context) {
+        qWarning("QEGLPlatformContext: No EGLContext given");
+        return;
+    }
+
+    // A context belonging to a given EGLDisplay cannot be used with another one.
+    if (handle.display() != m_eglDisplay) {
+        qWarning("QEGLPlatformContext: Cannot adopt context from different display");
+        return;
+    }
+
+    // Figure out the EGLConfig.
+    EGLint value = 0;
+    eglQueryContext(m_eglDisplay, context, EGL_CONFIG_ID, &value);
+    EGLint n = 0;
+    EGLConfig cfg;
+    const EGLint attribs[] = { EGL_CONFIG_ID, value, EGL_NONE };
+    if (eglChooseConfig(m_eglDisplay, attribs, &cfg, 1, &n) && n == 1) {
+        m_eglConfig = cfg;
+        m_format = q_glFormatFromConfig(m_eglDisplay, m_eglConfig);
+    } else {
+        qWarning("QEGLPlatformContext: Failed to get framebuffer configuration for context");
+    }
+
+    // Fetch client API type.
+    value = 0;
+    eglQueryContext(m_eglDisplay, context, EGL_CONTEXT_CLIENT_TYPE, &value);
+    if (value == EGL_OPENGL_API || value == EGL_OPENGL_ES_API) {
+        m_api = value;
+        eglBindAPI(m_api);
+    } else {
+        qWarning("QEGLPlatformContext: Failed to get client API type");
+        m_api = EGL_OPENGL_ES_API;
+    }
+
+    m_eglContext = context;
+    m_shareContext = share ? static_cast<QEGLPlatformContext *>(share)->m_eglContext : 0;
+    updateFormatFromGL();
+}
+
+void QEGLPlatformContext::updateFormatFromGL()
+{
 #ifndef QT_NO_OPENGL
+    // Have to save & restore to prevent QOpenGLContext::currentContext() from becoming
+    // inconsistent after QOpenGLContext::create().
+    EGLDisplay prevDisplay = eglGetCurrentDisplay();
+    if (prevDisplay == EGL_NO_DISPLAY) // when no context is current
+        prevDisplay = m_eglDisplay;
+    EGLContext prevContext = eglGetCurrentContext();
+    EGLSurface prevSurfaceDraw = eglGetCurrentSurface(EGL_DRAW);
+    EGLSurface prevSurfaceRead = eglGetCurrentSurface(EGL_READ);
+
     // Make the context current to ensure the GL version query works. This needs a surface too.
     const EGLint pbufferAttributes[] = {
         EGL_WIDTH, 1,
@@ -206,7 +257,11 @@ void QEGLPlatformContext::init(const QSurfaceFormat &format, QPlatformOpenGLCont
         EGL_LARGEST_PBUFFER, EGL_FALSE,
         EGL_NONE
     };
-    EGLSurface pbuffer = eglCreatePbufferSurface(m_eglDisplay, m_eglConfig, pbufferAttributes);
+    // Cannot just pass m_eglConfig because it may not be suitable for pbuffers. Instead,
+    // do what QEGLPbuffer would do: request a config with the same attributes but with
+    // PBUFFER_BIT set.
+    EGLConfig config = q_configFromGLFormat(m_eglDisplay, m_format, false, EGL_PBUFFER_BIT);
+    EGLSurface pbuffer = eglCreatePbufferSurface(m_eglDisplay, config, pbufferAttributes);
     if (pbuffer == EGL_NO_SURFACE)
         return;
 
@@ -246,7 +301,7 @@ void QEGLPlatformContext::init(const QSurfaceFormat &format, QPlatformOpenGLCont
                 }
             }
         }
-        eglMakeCurrent(m_eglDisplay, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
+        eglMakeCurrent(prevDisplay, prevSurfaceDraw, prevSurfaceRead, prevContext);
     }
     eglDestroySurface(m_eglDisplay, pbuffer);
 #endif // QT_NO_OPENGL
@@ -296,10 +351,10 @@ bool QEGLPlatformContext::makeCurrent(QPlatformSurface *surface)
 
 QEGLPlatformContext::~QEGLPlatformContext()
 {
-    if (m_eglContext != EGL_NO_CONTEXT) {
+    if (m_ownsContext && m_eglContext != EGL_NO_CONTEXT)
         eglDestroyContext(m_eglDisplay, m_eglContext);
-        m_eglContext = EGL_NO_CONTEXT;
-    }
+
+    m_eglContext = EGL_NO_CONTEXT;
 }
 
 void QEGLPlatformContext::doneCurrent()
diff --git a/src/platformsupport/eglconvenience/qeglplatformcontext_p.h b/src/platformsupport/eglconvenience/qeglplatformcontext_p.h
index 8fbd573e33..7825c7b3d7 100644
--- a/src/platformsupport/eglconvenience/qeglplatformcontext_p.h
+++ b/src/platformsupport/eglconvenience/qeglplatformcontext_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,7 @@
 
 #include <qpa/qplatformwindow.h>
 #include <qpa/qplatformopenglcontext.h>
+#include <QtCore/QVariant>
 #include <EGL/egl.h>
 
 QT_BEGIN_NAMESPACE
@@ -62,9 +55,8 @@ QT_BEGIN_NAMESPACE
 class QEGLPlatformContext : public QPlatformOpenGLContext
 {
 public:
-    QEGLPlatformContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display);
     QEGLPlatformContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display,
-                        EGLConfig config);
+                        EGLConfig *config = 0, const QVariant &nativeHandle = QVariant());
     ~QEGLPlatformContext();
 
     bool makeCurrent(QPlatformSurface *surface);
@@ -85,6 +77,8 @@ protected:
 
 private:
     void init(const QSurfaceFormat &format, QPlatformOpenGLContext *share);
+    void adopt(const QVariant &nativeHandle, QPlatformOpenGLContext *share);
+    void updateFormatFromGL();
 
     EGLContext m_eglContext;
     EGLContext m_shareContext;
@@ -95,6 +89,7 @@ private:
     int m_swapInterval;
     bool m_swapIntervalEnvChecked;
     int m_swapIntervalFromEnv;
+    bool m_ownsContext;
 };
 
 QT_END_NAMESPACE
diff --git a/src/platformsupport/eglconvenience/qeglplatformcursor.cpp b/src/platformsupport/eglconvenience/qeglplatformcursor.cpp
index b6293e60ec..df6e6cd50c 100644
--- a/src/platformsupport/eglconvenience/qeglplatformcursor.cpp
+++ b/src/platformsupport/eglconvenience/qeglplatformcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -343,6 +335,8 @@ void QEGLPlatformCursor::draw(const QRectF &r)
 {
     if (!m_program) {
         // one time initialization
+        initializeOpenGLFunctions();
+
         createShaderPrograms();
 
         if (!m_cursorAtlas.texture) {
@@ -387,6 +381,7 @@ void QEGLPlatformCursor::draw(const QRectF &r)
     };
 
     glBindTexture(GL_TEXTURE_2D, m_cursor.texture);
+    glBindBuffer(GL_ARRAY_BUFFER, 0);
 
     m_program->enableAttributeArray(m_vertexCoordEntry);
     m_program->enableAttributeArray(m_textureCoordEntry);
diff --git a/src/platformsupport/eglconvenience/qeglplatformcursor_p.h b/src/platformsupport/eglconvenience/qeglplatformcursor_p.h
index be2ec56787..83204748c1 100644
--- a/src/platformsupport/eglconvenience/qeglplatformcursor_p.h
+++ b/src/platformsupport/eglconvenience/qeglplatformcursor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,7 @@
 
 #include <qpa/qplatformcursor.h>
 #include <qpa/qplatformscreen.h>
+#include <QtGui/QOpenGLFunctions>
 
 QT_BEGIN_NAMESPACE
 
@@ -97,7 +90,7 @@ private:
     bool m_active;
 };
 
-class QEGLPlatformCursor : public QPlatformCursor
+class QEGLPlatformCursor : public QPlatformCursor, protected QOpenGLFunctions
 {
 public:
     QEGLPlatformCursor(QPlatformScreen *screen);
@@ -124,7 +117,7 @@ private:
     void draw(const QRectF &rect);
     void update(const QRegion &region);
     void createShaderPrograms();
-    static void createCursorTexture(uint *texture, const QImage &image);
+    void createCursorTexture(uint *texture, const QImage &image);
     void initCursorAtlas();
 
     // current cursor information
diff --git a/src/platformsupport/eglconvenience/qeglplatformintegration.cpp b/src/platformsupport/eglconvenience/qeglplatformintegration.cpp
index b48f993436..7d05b54c15 100644
--- a/src/platformsupport/eglconvenience/qeglplatformintegration.cpp
+++ b/src/platformsupport/eglconvenience/qeglplatformintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #include <QtGui/QOpenGLContext>
 #include <QtGui/QOffscreenSurface>
 #include <QtGui/QGuiApplication>
+#include <QtGui/private/qguiapplication_p.h>
 #include <qpa/qwindowsysteminterface.h>
 #include <qpa/qplatforminputcontextfactory_p.h>
 
@@ -57,6 +50,8 @@
 #include <QtPlatformSupport/private/qevdevtouch_p.h>
 #endif
 
+#include <QtPlatformHeaders/qeglfsfunctions.h>
+
 #include "qeglplatformintegration_p.h"
 #include "qeglplatformcontext_p.h"
 #include "qeglplatformwindow_p.h"
@@ -93,7 +88,8 @@ QEGLPlatformIntegration::QEGLPlatformIntegration()
       m_display(EGL_NO_DISPLAY),
       m_inputContext(0),
       m_fontDb(new QGenericUnixFontDatabase),
-      m_services(new QGenericUnixServices)
+      m_services(new QGenericUnixServices),
+      m_kbdMgr(0)
 {
 }
 
@@ -158,9 +154,14 @@ QPlatformOpenGLContext *QEGLPlatformIntegration::createPlatformOpenGLContext(QOp
     // If there is a "root" window into which raster and QOpenGLWidget content is
     // composited, all other contexts must share with its context.
     QOpenGLContext *compositingContext = screen ? screen->compositingContext() : 0;
-    return createContext(context->format(),
-                         compositingContext ? compositingContext->handle() : context->shareHandle(),
-                         display());
+    QPlatformOpenGLContext *share = compositingContext ? compositingContext->handle() : context->shareHandle();
+    QVariant nativeHandle = context->nativeHandle();
+    QPlatformOpenGLContext *platformContext = createContext(context->format(),
+                                                            share,
+                                                            display(),
+                                                            &nativeHandle);
+    context->setNativeHandle(nativeHandle);
+    return platformContext;
 }
 
 QPlatformOffscreenSurface *QEGLPlatformIntegration::createPlatformOffscreenSurface(QOffscreenSurface *surface) const
@@ -189,7 +190,10 @@ QPlatformNativeInterface *QEGLPlatformIntegration::nativeInterface() const
 enum ResourceType {
     EglDisplay,
     EglWindow,
-    EglContext
+    EglContext,
+    EglConfig,
+    NativeDisplay,
+    XlibDisplay
 };
 
 static int resourceType(const QByteArray &key)
@@ -197,7 +201,10 @@ static int resourceType(const QByteArray &key)
     static const QByteArray names[] = { // match ResourceType
         QByteArrayLiteral("egldisplay"),
         QByteArrayLiteral("eglwindow"),
-        QByteArrayLiteral("eglcontext")
+        QByteArrayLiteral("eglcontext"),
+        QByteArrayLiteral("eglconfig"),
+        QByteArrayLiteral("nativedisplay"),
+        QByteArrayLiteral("display")
     };
     const QByteArray *end = names + sizeof(names) / sizeof(names[0]);
     const QByteArray *result = std::find(names, end, key);
@@ -214,6 +221,26 @@ void *QEGLPlatformIntegration::nativeResourceForIntegration(const QByteArray &re
     case EglDisplay:
         result = m_screen->display();
         break;
+    case NativeDisplay:
+        result = reinterpret_cast<void*>(nativeDisplay());
+        break;
+    default:
+        break;
+    }
+
+    return result;
+}
+
+void *QEGLPlatformIntegration::nativeResourceForScreen(const QByteArray &resource, QScreen *)
+{
+    void *result = 0;
+
+    switch (resourceType(resource)) {
+    case XlibDisplay:
+        // Play nice when using the x11 hooks: Be compatible with xcb that allows querying
+        // the X Display pointer, which is nothing but our native display.
+        result = reinterpret_cast<void*>(nativeDisplay());
+        break;
     default:
         break;
     }
@@ -252,6 +279,14 @@ void *QEGLPlatformIntegration::nativeResourceForContext(const QByteArray &resour
         if (context->handle())
             result = static_cast<QEGLPlatformContext *>(context->handle())->eglContext();
         break;
+    case EglConfig:
+        if (context->handle())
+            result = static_cast<QEGLPlatformContext *>(context->handle())->eglConfig();
+        break;
+    case EglDisplay:
+        if (context->handle())
+            result = static_cast<QEGLPlatformContext *>(context->handle())->eglDisplay();
+        break;
     default:
         break;
     }
@@ -279,10 +314,35 @@ QPlatformNativeInterface::NativeResourceForContextFunction QEGLPlatformIntegrati
     return 0;
 }
 
+QFunctionPointer QEGLPlatformIntegration::platformFunction(const QByteArray &function) const
+{
+#if !defined(QT_NO_EVDEV) && (!defined(Q_OS_ANDROID) || defined(Q_OS_ANDROID_NO_SDK))
+    if (function == QEglFSFunctions::loadKeymapTypeIdentifier())
+        return QFunctionPointer(loadKeymapStatic);
+#else
+    Q_UNUSED(function)
+#endif
+
+    return 0;
+}
+
+void QEGLPlatformIntegration::loadKeymapStatic(const QString &filename)
+{
+#if !defined(QT_NO_EVDEV) && (!defined(Q_OS_ANDROID) || defined(Q_OS_ANDROID_NO_SDK))
+    QEGLPlatformIntegration *self = static_cast<QEGLPlatformIntegration *>(QGuiApplicationPrivate::platformIntegration());
+    if (self->m_kbdMgr)
+        self->m_kbdMgr->loadKeymap(filename);
+    else
+        qWarning("QEGLPlatformIntegration: Cannot load keymap, no keyboard handler found");
+#else
+    Q_UNUSED(filename);
+#endif
+}
+
 void QEGLPlatformIntegration::createInputHandlers()
 {
 #if !defined(QT_NO_EVDEV) && (!defined(Q_OS_ANDROID) || defined(Q_OS_ANDROID_NO_SDK))
-    new QEvdevKeyboardManager(QLatin1String("EvdevKeyboard"), QString() /* spec */, this);
+    m_kbdMgr = new QEvdevKeyboardManager(QLatin1String("EvdevKeyboard"), QString() /* spec */, this);
     QEvdevMouseManager *mouseMgr = new QEvdevMouseManager(QLatin1String("EvdevMouse"), QString() /* spec */, this);
     Q_FOREACH (QScreen *screen, QGuiApplication::screens()) {
         QEGLPlatformCursor *cursor = static_cast<QEGLPlatformCursor *>(screen->handle()->cursor());
diff --git a/src/platformsupport/eglconvenience/qeglplatformintegration_p.h b/src/platformsupport/eglconvenience/qeglplatformintegration_p.h
index cc10f3ed77..4d7adce309 100644
--- a/src/platformsupport/eglconvenience/qeglplatformintegration_p.h
+++ b/src/platformsupport/eglconvenience/qeglplatformintegration_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,7 @@
 
 #include <qpa/qplatformintegration.h>
 #include <qpa/qplatformnativeinterface.h>
+#include <QtCore/QVariant>
 #include <EGL/egl.h>
 
 QT_BEGIN_NAMESPACE
@@ -63,6 +56,7 @@ class QEGLPlatformScreen;
 class QEGLPlatformWindow;
 class QEGLPlatformContext;
 class QFbVtHandler;
+class QEvdevKeyboardManager;
 
 class QEGLPlatformIntegration : public QPlatformIntegration, public QPlatformNativeInterface
 {
@@ -90,16 +84,20 @@ public:
     QPlatformNativeInterface *nativeInterface() const Q_DECL_OVERRIDE;
     // QPlatformNativeInterface
     void *nativeResourceForIntegration(const QByteArray &resource) Q_DECL_OVERRIDE;
+    void *nativeResourceForScreen(const QByteArray &resource, QScreen *screen) Q_DECL_OVERRIDE;
     void *nativeResourceForWindow(const QByteArray &resource, QWindow *window) Q_DECL_OVERRIDE;
     void *nativeResourceForContext(const QByteArray &resource, QOpenGLContext *context) Q_DECL_OVERRIDE;
     NativeResourceForContextFunction nativeResourceFunctionForContext(const QByteArray &resource) Q_DECL_OVERRIDE;
 
+    QFunctionPointer platformFunction(const QByteArray &function) const Q_DECL_OVERRIDE;
+
 protected:
     virtual QEGLPlatformScreen *createScreen() const = 0;
     virtual QEGLPlatformWindow *createWindow(QWindow *window) const = 0;
     virtual QEGLPlatformContext *createContext(const QSurfaceFormat &format,
                                                QPlatformOpenGLContext *shareContext,
-                                               EGLDisplay display) const = 0;
+                                               EGLDisplay display,
+                                               QVariant *nativeHandle) const = 0;
     virtual QPlatformOffscreenSurface *createOffscreenSurface(EGLDisplay display,
                                                               const QSurfaceFormat &format,
                                                               QOffscreenSurface *surface) const = 0;
@@ -109,12 +107,15 @@ protected:
     void createInputHandlers();
 
 private:
+    static void loadKeymapStatic(const QString &filename);
+
     QEGLPlatformScreen *m_screen;
     EGLDisplay m_display;
     QPlatformInputContext *m_inputContext;
     QScopedPointer<QPlatformFontDatabase> m_fontDb;
     QScopedPointer<QPlatformServices> m_services;
     QScopedPointer<QFbVtHandler> m_vtHandler;
+    QEvdevKeyboardManager *m_kbdMgr;
 };
 
 QT_END_NAMESPACE
diff --git a/src/platformsupport/eglconvenience/qeglplatformscreen.cpp b/src/platformsupport/eglconvenience/qeglplatformscreen.cpp
index 72e7f6a6df..fd577a48d7 100644
--- a/src/platformsupport/eglconvenience/qeglplatformscreen.cpp
+++ b/src/platformsupport/eglconvenience/qeglplatformscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglplatformscreen_p.h b/src/platformsupport/eglconvenience/qeglplatformscreen_p.h
index 955d9db5de..bb1d26d7d2 100644
--- a/src/platformsupport/eglconvenience/qeglplatformscreen_p.h
+++ b/src/platformsupport/eglconvenience/qeglplatformscreen_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qeglplatformwindow.cpp b/src/platformsupport/eglconvenience/qeglplatformwindow.cpp
index e9b79512ba..39edec4811 100644
--- a/src/platformsupport/eglconvenience/qeglplatformwindow.cpp
+++ b/src/platformsupport/eglconvenience/qeglplatformwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -127,4 +119,12 @@ WId QEGLPlatformWindow::winId() const
     return m_winId;
 }
 
+void QEGLPlatformWindow::setOpacity(qreal)
+{
+    if (!isRaster())
+        qWarning("eglfs: Cannot set opacity for non-raster windows");
+
+    // Nothing to do here. The opacity is stored in the QWindow.
+}
+
 QT_END_NAMESPACE
diff --git a/src/platformsupport/eglconvenience/qeglplatformwindow_p.h b/src/platformsupport/eglconvenience/qeglplatformwindow_p.h
index 86d6eee57a..3a19301e5d 100644
--- a/src/platformsupport/eglconvenience/qeglplatformwindow_p.h
+++ b/src/platformsupport/eglconvenience/qeglplatformwindow_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,6 +67,7 @@ public:
     bool isRaster() const;
 
     WId winId() const Q_DECL_OVERRIDE;
+    void setOpacity(qreal opacity) Q_DECL_OVERRIDE;
 
     virtual EGLNativeWindowType eglWindow() const = 0;
 
diff --git a/src/platformsupport/eglconvenience/qxlibeglintegration.cpp b/src/platformsupport/eglconvenience/qxlibeglintegration.cpp
index 9c2d50823a..ff7e6ce271 100644
--- a/src/platformsupport/eglconvenience/qxlibeglintegration.cpp
+++ b/src/platformsupport/eglconvenience/qxlibeglintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eglconvenience/qxlibeglintegration_p.h b/src/platformsupport/eglconvenience/qxlibeglintegration_p.h
index 2ee63d4fbc..5649195362 100644
--- a/src/platformsupport/eglconvenience/qxlibeglintegration_p.h
+++ b/src/platformsupport/eglconvenience/qxlibeglintegration_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qeventdispatcher_cf_p.h b/src/platformsupport/eventdispatchers/qeventdispatcher_cf_p.h
index fe911be510..2d1b4749f7 100644
--- a/src/platformsupport/eventdispatchers/qeventdispatcher_cf_p.h
+++ b/src/platformsupport/eventdispatchers/qeventdispatcher_cf_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qeventdispatcher_glib.cpp b/src/platformsupport/eventdispatchers/qeventdispatcher_glib.cpp
index 28f04e50e6..028fe0ce78 100644
--- a/src/platformsupport/eventdispatchers/qeventdispatcher_glib.cpp
+++ b/src/platformsupport/eventdispatchers/qeventdispatcher_glib.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qeventdispatcher_glib_p.h b/src/platformsupport/eventdispatchers/qeventdispatcher_glib_p.h
index a042863dde..a9402f920d 100644
--- a/src/platformsupport/eventdispatchers/qeventdispatcher_glib_p.h
+++ b/src/platformsupport/eventdispatchers/qeventdispatcher_glib_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher.cpp b/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher.cpp
index 7163199405..ed16ab48ad 100644
--- a/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher.cpp
+++ b/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher_p.h b/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher_p.h
index c500cd9c93..8ff92594da 100644
--- a/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher_p.h
+++ b/src/platformsupport/eventdispatchers/qgenericunixeventdispatcher_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qunixeventdispatcher.cpp b/src/platformsupport/eventdispatchers/qunixeventdispatcher.cpp
index 5e07832c07..0b220e4f5f 100644
--- a/src/platformsupport/eventdispatchers/qunixeventdispatcher.cpp
+++ b/src/platformsupport/eventdispatchers/qunixeventdispatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/eventdispatchers/qunixeventdispatcher_qpa_p.h b/src/platformsupport/eventdispatchers/qunixeventdispatcher_qpa_p.h
index 517b2235d4..250fd14be3 100644
--- a/src/platformsupport/eventdispatchers/qunixeventdispatcher_qpa_p.h
+++ b/src/platformsupport/eventdispatchers/qunixeventdispatcher_qpa_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbbackingstore.cpp b/src/platformsupport/fbconvenience/qfbbackingstore.cpp
index 9ab212a998..0fa23ebe02 100644
--- a/src/platformsupport/fbconvenience/qfbbackingstore.cpp
+++ b/src/platformsupport/fbconvenience/qfbbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbbackingstore_p.h b/src/platformsupport/fbconvenience/qfbbackingstore_p.h
index 2a8597e5d9..08a4b37eee 100644
--- a/src/platformsupport/fbconvenience/qfbbackingstore_p.h
+++ b/src/platformsupport/fbconvenience/qfbbackingstore_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbcursor.cpp b/src/platformsupport/fbconvenience/qfbcursor.cpp
index bff663c13b..49bc88d854 100644
--- a/src/platformsupport/fbconvenience/qfbcursor.cpp
+++ b/src/platformsupport/fbconvenience/qfbcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbcursor_p.h b/src/platformsupport/fbconvenience/qfbcursor_p.h
index 4196cad96f..0354989a8b 100644
--- a/src/platformsupport/fbconvenience/qfbcursor_p.h
+++ b/src/platformsupport/fbconvenience/qfbcursor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbscreen.cpp b/src/platformsupport/fbconvenience/qfbscreen.cpp
index 37d16ddeb6..aa35825be0 100644
--- a/src/platformsupport/fbconvenience/qfbscreen.cpp
+++ b/src/platformsupport/fbconvenience/qfbscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -171,8 +163,7 @@ void QFbScreen::setGeometry(const QRect &rect)
     mGeometry = rect;
     mScreenImage = new QImage(mGeometry.size(), mFormat);
     invalidateRectCache();
-    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry());
-    QWindowSystemInterface::handleScreenAvailableGeometryChange(QPlatformScreen::screen(), availableGeometry());
+    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry(), availableGeometry());
     resizeMaximizedWindows();
 }
 
@@ -196,13 +187,13 @@ void QFbScreen::generateRects()
             remainingScreen -= localGeometry;
             QRegion windowRegion(localGeometry);
             windowRegion -= remainingScreen;
-            foreach (QRect rect, windowRegion.rects()) {
+            foreach (const QRect &rect, windowRegion.rects()) {
                 mCachedRects += QPair<QRect, int>(rect, i);
             }
         }
 #endif
     }
-    foreach (QRect rect, remainingScreen.rects())
+    foreach (const QRect &rect, remainingScreen.rects())
         mCachedRects += QPair<QRect, int>(rect, -1);
     mIsUpToDate = true;
     return;
@@ -242,7 +233,7 @@ QRegion QFbScreen::doRedraw()
             rectRegion -= intersect;
 
             // we only expect one rectangle, but defensive coding...
-            foreach (QRect rect, intersect.rects()) {
+            foreach (const QRect &rect, intersect.rects()) {
                 bool firstLayer = true;
                 if (layer == -1) {
                     mCompositePainter->fillRect(rect, Qt::black);
diff --git a/src/platformsupport/fbconvenience/qfbscreen_p.h b/src/platformsupport/fbconvenience/qfbscreen_p.h
index db93304fc7..b6e50dc786 100644
--- a/src/platformsupport/fbconvenience/qfbscreen_p.h
+++ b/src/platformsupport/fbconvenience/qfbscreen_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -119,7 +111,7 @@ private:
     void generateRects();
 
     QPainter *mCompositePainter;
-    QList<QPair<QRect, int> > mCachedRects;
+    QVector<QPair<QRect, int> > mCachedRects;
     QList <QFbBackingStore*> mBackingStores;
 
     friend class QFbWindow;
diff --git a/src/platformsupport/fbconvenience/qfbvthandler.cpp b/src/platformsupport/fbconvenience/qfbvthandler.cpp
index edfd13d9bf..511f723dd9 100644
--- a/src/platformsupport/fbconvenience/qfbvthandler.cpp
+++ b/src/platformsupport/fbconvenience/qfbvthandler.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbvthandler_p.h b/src/platformsupport/fbconvenience/qfbvthandler_p.h
index ddaedca3e0..eac7f82df8 100644
--- a/src/platformsupport/fbconvenience/qfbvthandler_p.h
+++ b/src/platformsupport/fbconvenience/qfbvthandler_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbwindow.cpp b/src/platformsupport/fbconvenience/qfbwindow.cpp
index 98c16e61c8..93fa00d819 100644
--- a/src/platformsupport/fbconvenience/qfbwindow.cpp
+++ b/src/platformsupport/fbconvenience/qfbwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fbconvenience/qfbwindow_p.h b/src/platformsupport/fbconvenience/qfbwindow_p.h
index 8e526404e0..f1630764b0 100644
--- a/src/platformsupport/fbconvenience/qfbwindow_p.h
+++ b/src/platformsupport/fbconvenience/qfbwindow_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fontdatabases/basic/qbasicfontdatabase.cpp b/src/platformsupport/fontdatabases/basic/qbasicfontdatabase.cpp
index 26ae0eb724..fb9ec0f2e4 100644
--- a/src/platformsupport/fontdatabases/basic/qbasicfontdatabase.cpp
+++ b/src/platformsupport/fontdatabases/basic/qbasicfontdatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -96,8 +88,9 @@ void QBasicFontDatabase::populateFontDatabase()
     QString fontpath = fontDir();
 
     if(!QFile::exists(fontpath)) {
-        qFatal("QFontDatabase: Cannot find font directory %s - is Qt installed correctly?",
+        qWarning("QFontDatabase: Cannot find font directory %s - is Qt installed correctly?",
                qPrintable(fontpath));
+        return;
     }
 
     QDir dir(fontpath);
diff --git a/src/platformsupport/fontdatabases/basic/qbasicfontdatabase_p.h b/src/platformsupport/fontdatabases/basic/qbasicfontdatabase_p.h
index a512644966..a37bfb9f5c 100644
--- a/src/platformsupport/fontdatabases/basic/qbasicfontdatabase_p.h
+++ b/src/platformsupport/fontdatabases/basic/qbasicfontdatabase_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase.cpp b/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase.cpp
index b8da9726d5..62dc9a9c6b 100644
--- a/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase.cpp
+++ b/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,7 +43,6 @@
 #include <qpa/qplatformservices.h>
 
 #include <QtGui/private/qfontengine_ft_p.h>
-#include <QtGui/private/qfontengine_qpa_p.h>
 #include <QtGui/private/qguiapplication_p.h>
 
 #include <QtGui/qguiapplication.h>
@@ -517,21 +508,20 @@ QFontEngineMulti *QFontconfigDatabase::fontEngineMulti(QFontEngine *fontEngine,
 }
 
 namespace {
-QFontEngineFT::HintStyle defaultHintStyleFromMatch(QFont::HintingPreference hintingPreference, FcPattern *match)
+QFontEngine::HintStyle defaultHintStyleFromMatch(QFont::HintingPreference hintingPreference, FcPattern *match, bool useXftConf)
 {
     switch (hintingPreference) {
     case QFont::PreferNoHinting:
-        return QFontEngineFT::HintNone;
+        return QFontEngine::HintNone;
     case QFont::PreferVerticalHinting:
-        return QFontEngineFT::HintLight;
+        return QFontEngine::HintLight;
     case QFont::PreferFullHinting:
-        return QFontEngineFT::HintFull;
+        return QFontEngine::HintFull;
     case QFont::PreferDefaultHinting:
         break;
     }
 
-    const QPlatformServices *services = QGuiApplicationPrivate::platformIntegration()->services();
-    if (services && (services->desktopEnvironment() == "GNOME" || services->desktopEnvironment() == "UNITY")) {
+    if (useXftConf) {
         void *hintStyleResource =
                 QGuiApplication::platformNativeInterface()->nativeResourceForScreen("hintstyle",
                                                                                     QGuiApplication::primaryScreen());
@@ -545,42 +535,51 @@ QFontEngineFT::HintStyle defaultHintStyleFromMatch(QFont::HintingPreference hint
         hint_style = FC_HINT_FULL;
     switch (hint_style) {
     case FC_HINT_NONE:
-        return QFontEngineFT::HintNone;
+        return QFontEngine::HintNone;
     case FC_HINT_SLIGHT:
-        return QFontEngineFT::HintLight;
+        return QFontEngine::HintLight;
     case FC_HINT_MEDIUM:
-        return QFontEngineFT::HintMedium;
+        return QFontEngine::HintMedium;
     case FC_HINT_FULL:
-        return QFontEngineFT::HintFull;
+        return QFontEngine::HintFull;
     default:
         Q_UNREACHABLE();
         break;
     }
-    return QFontEngineFT::HintFull;
+    return QFontEngine::HintFull;
 }
 
-QFontEngineFT::SubpixelAntialiasingType subpixelTypeFromMatch(FcPattern *match)
+QFontEngine::SubpixelAntialiasingType subpixelTypeFromMatch(FcPattern *match, bool useXftConf)
 {
+    if (useXftConf) {
+        void *subpixelTypeResource =
+                QGuiApplication::platformNativeInterface()->nativeResourceForScreen("subpixeltype",
+                                                                                    QGuiApplication::primaryScreen());
+        int subpixelType = int(reinterpret_cast<qintptr>(subpixelTypeResource));
+        if (subpixelType > 0)
+            return QFontEngine::SubpixelAntialiasingType(subpixelType - 1);
+    }
+
     int subpixel = FC_RGBA_UNKNOWN;
     FcPatternGetInteger(match, FC_RGBA, 0, &subpixel);
 
     switch (subpixel) {
     case FC_RGBA_UNKNOWN:
     case FC_RGBA_NONE:
-        return QFontEngineFT::Subpixel_None;
+        return QFontEngine::Subpixel_None;
     case FC_RGBA_RGB:
-        return QFontEngineFT::Subpixel_RGB;
+        return QFontEngine::Subpixel_RGB;
     case FC_RGBA_BGR:
-        return QFontEngineFT::Subpixel_BGR;
+        return QFontEngine::Subpixel_BGR;
     case FC_RGBA_VRGB:
-        return QFontEngineFT::Subpixel_VRGB;
+        return QFontEngine::Subpixel_VRGB;
     case FC_RGBA_VBGR:
-        return QFontEngineFT::Subpixel_VBGR;
+        return QFontEngine::Subpixel_VBGR;
     default:
         Q_UNREACHABLE();
         break;
     }
-    return QFontEngineFT::Subpixel_None;
+    return QFontEngine::Subpixel_None;
 }
 } // namespace
 
@@ -597,9 +596,23 @@ QFontEngine *QFontconfigDatabase::fontEngine(const QFontDef &f, void *usrPtr)
     fid.index = fontfile->indexValue;
 
     bool antialias = !(fontDef.styleStrategy & QFont::NoAntialias);
+    bool forcedAntialiasSetting = !antialias;
     engine = new QFontEngineFT(fontDef);
 
-    QFontEngineFT::GlyphFormat format;
+    const QPlatformServices *services = QGuiApplicationPrivate::platformIntegration()->services();
+    bool useXftConf = (services && (services->desktopEnvironment() == "GNOME" || services->desktopEnvironment() == "UNITY"));
+    if (useXftConf) {
+        void *antialiasResource =
+                QGuiApplication::platformNativeInterface()->nativeResourceForScreen("antialiasingEnabled",
+                                                                                    QGuiApplication::primaryScreen());
+        int antialiasingEnabled = int(reinterpret_cast<qintptr>(antialiasResource));
+        if (antialiasingEnabled > 0) {
+            antialias = antialiasingEnabled - 1;
+            forcedAntialiasSetting = true;
+        }
+    }
+
+    QFontEngine::GlyphFormat format;
     // try and get the pattern
     FcPattern *pattern = FcPatternCreate();
 
@@ -623,29 +636,39 @@ QFontEngine *QFontconfigDatabase::fontEngine(const QFontDef &f, void *usrPtr)
 
     FcPattern *match = FcFontMatch(0, pattern, &result);
     if (match) {
-        engine->setDefaultHintStyle(defaultHintStyleFromMatch((QFont::HintingPreference)f.hintingPreference, match));
+        engine->setDefaultHintStyle(defaultHintStyleFromMatch((QFont::HintingPreference)f.hintingPreference, match, useXftConf));
 
-        if (antialias) {
-            // If antialiasing is not fully disabled, fontconfig may still disable it on a font match basis.
+        FcBool fc_autohint;
+        if (FcPatternGetBool(match, FC_AUTOHINT,0, &fc_autohint) == FcResultMatch)
+            engine->forceAutoHint = fc_autohint;
+
+#if defined(FT_LCD_FILTER_H)
+        int lcdFilter;
+        if (FcPatternGetInteger(match, FC_LCD_FILTER, 0, &lcdFilter) == FcResultMatch)
+            engine->lcdFilterType = lcdFilter;
+#endif
+
+        if (!forcedAntialiasSetting) {
             FcBool fc_antialias;
-            if (FcPatternGetBool(match, FC_ANTIALIAS,0, &fc_antialias) != FcResultMatch)
-                fc_antialias = true;
-            antialias = fc_antialias;
+            if (FcPatternGetBool(match, FC_ANTIALIAS,0, &fc_antialias) == FcResultMatch)
+                antialias = fc_antialias;
         }
 
         if (antialias) {
-            QFontEngineFT::SubpixelAntialiasingType subpixelType = subpixelTypeFromMatch(match);
+            QFontEngine::SubpixelAntialiasingType subpixelType = QFontEngine::Subpixel_None;
+            if (!(f.styleStrategy & QFont::NoSubpixelAntialias))
+                subpixelType = subpixelTypeFromMatch(match, useXftConf);
             engine->subpixelType = subpixelType;
 
-            format = (subpixelType == QFontEngineFT::Subpixel_None)
-                    ? QFontEngineFT::Format_A8
-                    : QFontEngineFT::Format_A32;
+            format = (subpixelType == QFontEngine::Subpixel_None)
+                    ? QFontEngine::Format_A8
+                    : QFontEngine::Format_A32;
         } else
-            format = QFontEngineFT::Format_Mono;
+            format = QFontEngine::Format_Mono;
 
         FcPatternDestroy(match);
     } else
-        format = antialias ? QFontEngineFT::Format_A8 : QFontEngineFT::Format_Mono;
+        format = antialias ? QFontEngine::Format_A8 : QFontEngine::Format_Mono;
 
     FcPatternDestroy(pattern);
 
@@ -665,7 +688,21 @@ QFontEngine *QFontconfigDatabase::fontEngine(const QByteArray &fontData, qreal p
 
     QFontDef fontDef = engine->fontDef;
 
-    QFontEngineFT::GlyphFormat format;
+    bool forcedAntialiasSetting = false;
+    const QPlatformServices *services = QGuiApplicationPrivate::platformIntegration()->services();
+    bool useXftConf = (services && (services->desktopEnvironment() == "GNOME" || services->desktopEnvironment() == "UNITY"));
+    if (useXftConf) {
+        void *antialiasResource =
+                QGuiApplication::platformNativeInterface()->nativeResourceForScreen("antialiasingEnabled",
+                                                                                    QGuiApplication::primaryScreen());
+        int antialiasingEnabled = int(reinterpret_cast<qintptr>(antialiasResource));
+        if (antialiasingEnabled > 0) {
+            engine->antialias = antialiasingEnabled - 1;
+            forcedAntialiasSetting = true;
+        }
+    }
+
+    QFontEngine::GlyphFormat format;
     // try and get the pattern
     FcPattern *pattern = FcPatternCreate();
 
@@ -682,25 +719,36 @@ QFontEngine *QFontconfigDatabase::fontEngine(const QByteArray &fontData, qreal p
 
     FcPattern *match = FcFontMatch(0, pattern, &result);
     if (match) {
-        engine->setDefaultHintStyle(defaultHintStyleFromMatch(hintingPreference, match));
+        engine->setDefaultHintStyle(defaultHintStyleFromMatch(hintingPreference, match, useXftConf));
+
+        FcBool fc_autohint;
+        if (FcPatternGetBool(match, FC_AUTOHINT,0, &fc_autohint) == FcResultMatch)
+            engine->forceAutoHint = fc_autohint;
+
+#if defined(FT_LCD_FILTER_H)
+        int lcdFilter;
+        if (FcPatternGetInteger(match, FC_LCD_FILTER, 0, &lcdFilter) == FcResultMatch)
+            engine->lcdFilterType = lcdFilter;
+#endif
 
-        FcBool fc_antialias;
-        if (FcPatternGetBool(match, FC_ANTIALIAS,0, &fc_antialias) != FcResultMatch)
-            fc_antialias = true;
-        engine->antialias = fc_antialias;
+        if (!forcedAntialiasSetting) {
+            FcBool fc_antialias;
+            if (FcPatternGetBool(match, FC_ANTIALIAS,0, &fc_antialias) == FcResultMatch)
+                engine->antialias = fc_antialias;
+        }
 
         if (engine->antialias) {
-            QFontEngineFT::SubpixelAntialiasingType subpixelType = subpixelTypeFromMatch(match);
+            QFontEngine::SubpixelAntialiasingType subpixelType = subpixelTypeFromMatch(match, useXftConf);
             engine->subpixelType = subpixelType;
 
-            format = subpixelType == QFontEngineFT::Subpixel_None
-                    ? QFontEngineFT::Format_A8
-                    : QFontEngineFT::Format_A32;
+            format = subpixelType == QFontEngine::Subpixel_None
+                    ? QFontEngine::Format_A8
+                    : QFontEngine::Format_A32;
         } else
-            format = QFontEngineFT::Format_Mono;
+            format = QFontEngine::Format_Mono;
         FcPatternDestroy(match);
     } else
-        format = QFontEngineFT::Format_A8;
+        format = QFontEngine::Format_A8;
 
     FcPatternDestroy(pattern);
 
diff --git a/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase_p.h b/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase_p.h
index fc929e464d..91ecb52e7b 100644
--- a/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase_p.h
+++ b/src/platformsupport/fontdatabases/fontconfig/qfontconfigdatabase_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig.cpp b/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig.cpp
index fec489ba60..956cf68290 100644
--- a/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig.cpp
+++ b/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,7 +38,7 @@
 QT_BEGIN_NAMESPACE
 
 QFontEngineMultiFontConfig::QFontEngineMultiFontConfig(QFontEngine *fe, int script)
-    : QFontEngineMultiQPA(fe, script)
+    : QFontEngineMultiBasicImpl(fe, script)
 {
 }
 
diff --git a/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig_p.h b/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig_p.h
index 3c2be10be6..115f8e6c16 100644
--- a/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig_p.h
+++ b/src/platformsupport/fontdatabases/fontconfig/qfontenginemultifontconfig_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,12 +45,12 @@
 // We mean it.
 //
 
-#include <QtGui/private/qfontengine_qpa_p.h>
+#include <QtGui/private/qfontengine_p.h>
 #include <fontconfig/fontconfig.h>
 
 QT_BEGIN_NAMESPACE
 
-class QFontEngineMultiFontConfig : public QFontEngineMultiQPA
+class QFontEngineMultiFontConfig : public QFontEngineMultiBasicImpl
 {
 public:
     explicit QFontEngineMultiFontConfig(QFontEngine *fe, int script);
diff --git a/src/platformsupport/fontdatabases/genericunix/qgenericunixfontdatabase_p.h b/src/platformsupport/fontdatabases/genericunix/qgenericunixfontdatabase_p.h
index 42fd677cf7..aad94a06d1 100644
--- a/src/platformsupport/fontdatabases/genericunix/qgenericunixfontdatabase_p.h
+++ b/src/platformsupport/fontdatabases/genericunix/qgenericunixfontdatabase_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase.mm b/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase.mm
index 063d20dbd4..f213f6b04c 100644
--- a/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase.mm
+++ b/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase.mm
@@ -52,6 +52,7 @@
 #include "qfontengine_coretext_p.h"
 #include <QtCore/QSettings>
 #include <QtGui/QGuiApplication>
+#include <QtCore/QtEndian>
 
 QT_BEGIN_NAMESPACE
 
@@ -262,6 +263,27 @@ static void getFontDescription(CTFontDescriptorRef font, FontDescription *fd)
     fd->stretch = QFont::Unstretched;
     fd->fixedPitch = false;
 
+    if (QCFType<CTFontRef> tempFont = CTFontCreateWithFontDescriptor(font, 0.0, 0)) {
+        uint length = 0;
+        uint tag = MAKE_TAG('O', 'S', '/', '2');
+        CTFontRef tempFontRef = tempFont;
+        void *userData = reinterpret_cast<void *>(&tempFontRef);
+        if (QCoreTextFontEngine::ct_getSfntTable(userData, tag, 0, &length)) {
+            QVarLengthArray<uchar> os2Table(length);
+            if (length >= 86 && QCoreTextFontEngine::ct_getSfntTable(userData, tag, os2Table.data(), &length)) {
+                quint32 unicodeRange[4] = {
+                        qFromBigEndian<quint32>(os2Table.data() + 42),
+                        qFromBigEndian<quint32>(os2Table.data() + 46),
+                        qFromBigEndian<quint32>(os2Table.data() + 50),
+                        qFromBigEndian<quint32>(os2Table.data() + 54)
+                    };
+                quint32 codePageRange[2] = { qFromBigEndian<quint32>(os2Table.data() + 78),
+                                             qFromBigEndian<quint32>(os2Table.data() + 82) };
+                fd->writingSystems = QPlatformFontDatabase::writingSystemsFromTrueTypeBits(unicodeRange, codePageRange);
+            }
+        }
+    }
+
     if (styles) {
         if (CFNumberRef weightValue = (CFNumberRef) CFDictionaryGetValue(styles, kCTFontWeightTrait)) {
             double normalizedWeight;
@@ -384,7 +406,7 @@ QFontEngine *QCoreTextFontDatabase::fontEngine(const QByteArray &fontData, qreal
 
     QFontEngine *fontEngine = NULL;
     if (cgFont == NULL) {
-        qWarning("QRawFont::platformLoadFromData: CGFontCreateWithDataProvider failed");
+        qWarning("QCoreTextFontDatabase::fontEngine: CGFontCreateWithDataProvider failed");
     } else {
         QFontDef def;
         def.pixelSize = pixelSize;
@@ -459,6 +481,17 @@ QStringList QCoreTextFontDatabase::fallbacksForFamily(const QString &family, QFo
                             QCFString fallbackFamilyName = (CFStringRef) CTFontDescriptorCopyAttribute(fontFallback, kCTFontFamilyNameAttribute);
                             fallbackList.append(QCFString::toQString(fallbackFamilyName));
                         }
+
+#if defined(Q_OS_OSX)
+                        // Since we are only returning a list of default fonts for the current language, we do not
+                        // cover all unicode completely. This was especially an issue for some of the common script
+                        // symbols such as mathematical symbols, currency or geometric shapes. To minimize the risk
+                        // of missing glyphs, we add Arial Unicode MS as a final fail safe, since this covers most
+                        // of Unicode 2.1.
+                        if (!fallbackList.contains(QStringLiteral("Arial Unicode MS")))
+                            fallbackList.append(QStringLiteral("Arial Unicode MS"));
+#endif
+
                         fallbackLists[family] = fallbackList;
                     }
                 }
@@ -502,6 +535,14 @@ QStringList QCoreTextFontDatabase::fallbacksForFamily(const QString &family, QFo
             if (QCoreTextFontEngine::supportsColorGlyphs())
                 fallbackList.append(QLatin1String("Apple Color Emoji"));
 
+            // Since we are only returning a list of default fonts for the current language, we do not
+            // cover all unicode completely. This was especially an issue for some of the common script
+            // symbols such as mathematical symbols, currency or geometric shapes. To minimize the risk
+            // of missing glyphs, we add Arial Unicode MS as a final fail safe, since this covers most
+            // of Unicode 2.1.
+            if (!fallbackList.contains(QStringLiteral("Arial Unicode MS")))
+                fallbackList.append(QStringLiteral("Arial Unicode MS"));
+
             fallbackLists[styleLookupKey.arg(fallbackStyleHint)] = fallbackList;
         }
 #else
diff --git a/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase_p.h b/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase_p.h
index 10f54310a8..044db2b03d 100644
--- a/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase_p.h
+++ b/src/platformsupport/fontdatabases/mac/qcoretextfontdatabase_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm b/src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
index 6e2c8a2a9a..f96163fc5b 100644
--- a/src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
+++ b/src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
@@ -50,7 +50,7 @@ QT_BEGIN_NAMESPACE
 
 static float SYNTHETIC_ITALIC_SKEW = tanf(14 * acosf(0) / 90);
 
-static bool ct_getSfntTable(void *user_data, uint tag, uchar *buffer, uint *length)
+bool QCoreTextFontEngine::ct_getSfntTable(void *user_data, uint tag, uchar *buffer, uint *length)
 {
     CTFontRef ctfont = *(CTFontRef *)user_data;
 
diff --git a/src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h b/src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
index 8157742219..998a6abb18 100644
--- a/src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
+++ b/src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -129,6 +121,8 @@ public:
 #endif
     }
 
+    static bool ct_getSfntTable(void *user_data, uint tag, uchar *buffer, uint *length);
+
     static int antialiasingThreshold;
     static QFontEngine::GlyphFormat defaultGlyphFormat;
 
diff --git a/src/platformsupport/glxconvenience/qglxconvenience.cpp b/src/platformsupport/glxconvenience/qglxconvenience.cpp
index 4630b12a57..3a7577badf 100644
--- a/src/platformsupport/glxconvenience/qglxconvenience.cpp
+++ b/src/platformsupport/glxconvenience/qglxconvenience.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -250,7 +242,7 @@ XVisualInfo *qglx_findVisualInfo(Display *display, int screen, QSurfaceFormat *f
     return visualInfo;
 }
 
-void qglx_surfaceFormatFromGLXFBConfig(QSurfaceFormat *format, Display *display, GLXFBConfig config, GLXContext)
+void qglx_surfaceFormatFromGLXFBConfig(QSurfaceFormat *format, Display *display, GLXFBConfig config)
 {
     int redSize     = 0;
     int greenSize   = 0;
@@ -262,8 +254,6 @@ void qglx_surfaceFormatFromGLXFBConfig(QSurfaceFormat *format, Display *display,
     int sampleCount = 0;
     int stereo      = 0;
 
-    XVisualInfo *vi = glXGetVisualFromFBConfig(display,config);
-    XFree(vi);
     glXGetFBConfigAttrib(display, config, GLX_RED_SIZE,     &redSize);
     glXGetFBConfigAttrib(display, config, GLX_GREEN_SIZE,   &greenSize);
     glXGetFBConfigAttrib(display, config, GLX_BLUE_SIZE,    &blueSize);
@@ -287,6 +277,41 @@ void qglx_surfaceFormatFromGLXFBConfig(QSurfaceFormat *format, Display *display,
     format->setStereo(stereo);
 }
 
+void qglx_surfaceFormatFromVisualInfo(QSurfaceFormat *format, Display *display, XVisualInfo *visualInfo)
+{
+    int redSize     = 0;
+    int greenSize   = 0;
+    int blueSize    = 0;
+    int alphaSize   = 0;
+    int depthSize   = 0;
+    int stencilSize = 0;
+    int sampleBuffers = 0;
+    int sampleCount = 0;
+    int stereo      = 0;
+
+    glXGetConfig(display, visualInfo, GLX_RED_SIZE,     &redSize);
+    glXGetConfig(display, visualInfo, GLX_GREEN_SIZE,   &greenSize);
+    glXGetConfig(display, visualInfo, GLX_BLUE_SIZE,    &blueSize);
+    glXGetConfig(display, visualInfo, GLX_ALPHA_SIZE,   &alphaSize);
+    glXGetConfig(display, visualInfo, GLX_DEPTH_SIZE,   &depthSize);
+    glXGetConfig(display, visualInfo, GLX_STENCIL_SIZE, &stencilSize);
+    glXGetConfig(display, visualInfo, GLX_SAMPLES_ARB,  &sampleBuffers);
+    glXGetConfig(display, visualInfo, GLX_STEREO,       &stereo);
+
+    format->setRedBufferSize(redSize);
+    format->setGreenBufferSize(greenSize);
+    format->setBlueBufferSize(blueSize);
+    format->setAlphaBufferSize(alphaSize);
+    format->setDepthBufferSize(depthSize);
+    format->setStencilBufferSize(stencilSize);
+    if (sampleBuffers) {
+        glXGetConfig(display, visualInfo, GLX_SAMPLES_ARB, &sampleCount);
+        format->setSamples(sampleCount);
+    }
+
+    format->setStereo(stereo);
+}
+
 QSurfaceFormat qglx_reduceSurfaceFormat(const QSurfaceFormat &format, bool *reduced)
 {
     QSurfaceFormat retFormat = format;
diff --git a/src/platformsupport/glxconvenience/qglxconvenience_p.h b/src/platformsupport/glxconvenience/qglxconvenience_p.h
index 0477589d6c..5bd05c695d 100644
--- a/src/platformsupport/glxconvenience/qglxconvenience_p.h
+++ b/src/platformsupport/glxconvenience/qglxconvenience_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,7 +53,8 @@
 
 XVisualInfo *qglx_findVisualInfo(Display *display, int screen, QSurfaceFormat *format);
 GLXFBConfig qglx_findConfig(Display *display, int screen, const QSurfaceFormat &format, int drawableBit = GLX_WINDOW_BIT);
-void qglx_surfaceFormatFromGLXFBConfig(QSurfaceFormat *format, Display *display, GLXFBConfig config, GLXContext context = 0);
+void qglx_surfaceFormatFromGLXFBConfig(QSurfaceFormat *format, Display *display, GLXFBConfig config);
+void qglx_surfaceFormatFromVisualInfo(QSurfaceFormat *format, Display *display, XVisualInfo *visualInfo);
 QVector<int> qglx_buildSpec(const QSurfaceFormat &format, int drawableBit = GLX_WINDOW_BIT);
 QSurfaceFormat qglx_reduceSurfaceFormat(const QSurfaceFormat &format, bool *reduced);
 
diff --git a/src/platformsupport/input/evdevkeyboard/qevdevkeyboard_defaultmap_p.h b/src/platformsupport/input/evdevkeyboard/qevdevkeyboard_defaultmap_p.h
index ff34ad346b..b596d8d2f9 100644
--- a/src/platformsupport/input/evdevkeyboard/qevdevkeyboard_defaultmap_p.h
+++ b/src/platformsupport/input/evdevkeyboard/qevdevkeyboard_defaultmap_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler.cpp b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler.cpp
index 0841544208..27d15dfafa 100644
--- a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler.cpp
+++ b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -93,13 +85,15 @@ QEvdevKeyboardHandler::~QEvdevKeyboardHandler()
         qt_safe_close(m_fd);
 }
 
-QEvdevKeyboardHandler *QEvdevKeyboardHandler::create(const QString &device, const QString &specification)
+QEvdevKeyboardHandler *QEvdevKeyboardHandler::create(const QString &device,
+                                                     const QString &specification,
+                                                     const QString &defaultKeymapFile)
 {
 #ifdef QT_QPA_KEYMAP_DEBUG
     qWarning() << "Try to create keyboard handler for" << device << specification;
 #endif
 
-    QString keymapFile;
+    QString keymapFile = defaultKeymapFile;
     int repeatDelay = 400;
     int repeatRate = 80;
     bool disableZap = false;
@@ -406,6 +400,53 @@ QEvdevKeyboardHandler::KeycodeAction QEvdevKeyboardHandler::processKeycode(quint
 #ifdef QT_QPA_KEYMAP_DEBUG
             qWarning("Processing: uni=%04x, qt=%08x, qtmod=%08x", unicode, qtcode & ~modmask, (qtcode & modmask));
 #endif
+            //If NumLockOff and keypad key pressed remap event sent
+            if (!m_locks[1] &&
+                 (qtcode & Qt::KeypadModifier) &&
+                 keycode >= 71 &&
+                 keycode <= 83 &&
+                 keycode != 74 &&
+                 keycode != 78) {
+
+                unicode = 0xffff;
+                int oldMask = (qtcode & modmask);
+                switch (keycode) {
+                case 71: //7 --> Home
+                    qtcode = Qt::Key_Home;
+                    break;
+                case 72: //8 --> Up
+                    qtcode = Qt::Key_Up;
+                    break;
+                case 73: //9 --> PgUp
+                    qtcode = Qt::Key_PageUp;
+                    break;
+                case 75: //4 --> Left
+                    qtcode = Qt::Key_Left;
+                    break;
+                case 76: //5 --> Clear
+                    qtcode = Qt::Key_Clear;
+                    break;
+                case 77: //6 --> right
+                    qtcode = Qt::Key_Right;
+                    break;
+                case 79: //1 --> End
+                    qtcode = Qt::Key_End;
+                    break;
+                case 80: //2 --> Down
+                    qtcode = Qt::Key_Down;
+                    break;
+                case 81: //3 --> PgDn
+                    qtcode = Qt::Key_PageDown;
+                    break;
+                case 82: //0 --> Ins
+                    qtcode = Qt::Key_Insert;
+                    break;
+                case 83: //, --> Del
+                    qtcode = Qt::Key_Delete;
+                    break;
+                }
+                qtcode ^= oldMask;
+            }
 
             // send the result to the server
             processKeyEvent(keycode, unicode, qtcode & ~modmask, Qt::KeyboardModifiers(qtcode & modmask), pressed, autorepeat);
@@ -435,6 +476,29 @@ void QEvdevKeyboardHandler::unloadKeymap()
     memset(m_locks, 0, sizeof(m_locks));
     m_composing = 0;
     m_dead_unicode = 0xffff;
+
+    //Set locks according to keyboard leds
+    quint16 ledbits[1];
+    memset(ledbits, 0, sizeof(ledbits));
+    if (::ioctl(m_fd, EVIOCGLED(sizeof(ledbits)), ledbits) < 0) {
+        qWarning("Failed to query led states. Settings numlock & capslock off");
+        switchLed(LED_NUML,false);
+        switchLed(LED_CAPSL, false);
+        switchLed(LED_SCROLLL,false);
+    } else {
+        //Capslock
+        if ((ledbits[0]&0x02) > 0)
+            m_locks[0] = 1;
+        //Numlock
+        if ((ledbits[0]&0x01) > 0)
+            m_locks[1] = 1;
+        //Scrollock
+        if ((ledbits[0]&0x04) > 0)
+            m_locks[2] = 1;
+#ifdef QT_QPA_KEYMAP_DEBUG
+        qWarning("numlock=%d , capslock=%d, scrolllock=%d",m_locks[1],m_locks[0],m_locks[2]);
+#endif
+    }
 }
 
 bool QEvdevKeyboardHandler::loadKeymap(const QString &file)
diff --git a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler_p.h b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler_p.h
index 81bc2f6154..3e3866c97b 100644
--- a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler_p.h
+++ b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardhandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -156,7 +148,9 @@ public:
         SwitchConsoleMask  = 0x0000007f
     };
 
-    static QEvdevKeyboardHandler *create(const QString &device, const QString &specification);
+    static QEvdevKeyboardHandler *create(const QString &device,
+                                         const QString &specification,
+                                         const QString &defaultKeymapFile = QString());
 
     static Qt::KeyboardModifiers toQtModifiers(quint8 mod)
     {
@@ -172,13 +166,14 @@ public:
         return qtmod;
     }
 
+    bool loadKeymap(const QString &file);
+    void unloadKeymap();
+
 private slots:
     void readKeycode();
     KeycodeAction processKeycode(quint16 keycode, bool pressed, bool autorepeat);
 
 private:
-    void unloadKeymap();
-    bool loadKeymap(const QString &file);
     void processKeyEvent(int nativecode, int unicode, int qtcode,
                          Qt::KeyboardModifiers modifiers, bool isPress, bool autoRepeat);
     void switchLed(int, bool);
diff --git a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager.cpp b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager.cpp
index 4932087c5f..3f8eb1bcd5 100644
--- a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager.cpp
+++ b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -113,7 +105,7 @@ void QEvdevKeyboardManager::addKeyboard(const QString &deviceNode)
 #endif
 
     QEvdevKeyboardHandler *keyboard;
-    keyboard = QEvdevKeyboardHandler::create(deviceNode, m_spec);
+    keyboard = QEvdevKeyboardHandler::create(deviceNode, m_spec, m_defaultKeymapFile);
     if (keyboard)
         m_keyboards.insert(deviceNode, keyboard);
     else
@@ -132,4 +124,28 @@ void QEvdevKeyboardManager::removeKeyboard(const QString &deviceNode)
     }
 }
 
+void QEvdevKeyboardManager::loadKeymap(const QString &file)
+{
+    m_defaultKeymapFile = file;
+
+    if (file.isEmpty()) {
+        // Restore the default, which is either the built-in keymap or
+        // the one given in the plugin spec.
+        QString keymapFromSpec;
+        foreach (const QString &arg, m_spec.split(QLatin1Char(':'))) {
+            if (arg.startsWith(QLatin1String("keymap=")))
+                keymapFromSpec = arg.mid(7);
+        }
+        foreach (QEvdevKeyboardHandler *handler, m_keyboards) {
+            if (keymapFromSpec.isEmpty())
+                handler->unloadKeymap();
+            else
+                handler->loadKeymap(keymapFromSpec);
+        }
+    } else {
+        foreach (QEvdevKeyboardHandler *handler, m_keyboards)
+            handler->loadKeymap(file);
+    }
+}
+
 QT_END_NAMESPACE
diff --git a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager_p.h b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager_p.h
index 0b1ccc23ab..5f6c4c4b09 100644
--- a/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager_p.h
+++ b/src/platformsupport/input/evdevkeyboard/qevdevkeyboardmanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,8 @@ public:
     QEvdevKeyboardManager(const QString &key, const QString &specification, QObject *parent = 0);
     ~QEvdevKeyboardManager();
 
+    void loadKeymap(const QString &file);
+
 private slots:
     void addKeyboard(const QString &deviceNode = QString());
     void removeKeyboard(const QString &deviceNode);
@@ -78,6 +72,7 @@ private:
     QString m_spec;
     QHash<QString,QEvdevKeyboardHandler*> m_keyboards;
     QDeviceDiscovery *m_deviceDiscovery;
+    QString m_defaultKeymapFile;
 };
 
 QT_END_NAMESPACE
diff --git a/src/platformsupport/input/evdevmouse/qevdevmousehandler.cpp b/src/platformsupport/input/evdevmouse/qevdevmousehandler.cpp
index 92f807095f..11db06680a 100644
--- a/src/platformsupport/input/evdevmouse/qevdevmousehandler.cpp
+++ b/src/platformsupport/input/evdevmouse/qevdevmousehandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,6 +52,8 @@
 
 //#define QT_QPA_MOUSE_HANDLER_DEBUG
 
+#define TEST_BIT(array, bit)    (array[bit/8] & (1<<(bit%8)))
+
 QT_BEGIN_NAMESPACE
 
 QEvdevMouseHandler *QEvdevMouseHandler::create(const QString &device, const QString &specification)
@@ -71,6 +65,7 @@ QEvdevMouseHandler *QEvdevMouseHandler::create(const QString &device, const QStr
     bool compression = true;
     int jitterLimit = 0;
     int grab = 0;
+    bool abs = false;
 
     QStringList args = specification.split(QLatin1Char(':'));
     foreach (const QString &arg, args) {
@@ -80,27 +75,37 @@ QEvdevMouseHandler *QEvdevMouseHandler::create(const QString &device, const QStr
             jitterLimit = arg.mid(9).toInt();
         else if (arg.startsWith(QLatin1String("grab=")))
             grab = arg.mid(5).toInt();
+        else if (arg == QLatin1String("abs"))
+            abs = true;
     }
 
     int fd;
     fd = qt_safe_open(device.toLocal8Bit().constData(), O_RDONLY | O_NDELAY, 0);
     if (fd >= 0) {
         ::ioctl(fd, EVIOCGRAB, grab);
-        return new QEvdevMouseHandler(device, fd, compression, jitterLimit);
+        return new QEvdevMouseHandler(device, fd, abs, compression, jitterLimit);
     } else {
         qWarning("Cannot open mouse input device '%s': %s", qPrintable(device), strerror(errno));
         return 0;
     }
 }
 
-QEvdevMouseHandler::QEvdevMouseHandler(const QString &device, int fd, bool compression, int jitterLimit)
+QEvdevMouseHandler::QEvdevMouseHandler(const QString &device, int fd, bool abs, bool compression, int jitterLimit)
     : m_device(device), m_fd(fd), m_notify(0), m_x(0), m_y(0), m_prevx(0), m_prevy(0),
-      m_compression(compression), m_buttons(0), m_prevInvalid(true)
+      m_abs(abs), m_compression(compression), m_buttons(0), m_prevInvalid(true)
 {
     setObjectName(QLatin1String("Evdev Mouse Handler"));
 
     m_jitterLimitSquared = jitterLimit * jitterLimit;
 
+    // Some touch screens present as mice with absolute coordinates.
+    // These can not be differentiated from touchpads, so supplying abs to QT_QPA_EVDEV_MOUSE_PARAMETERS
+    // will force qevdevmousehandler to treat the coordinates as absolute, scaled to the hardware maximums.
+    // Turning this on will not affect mice as these do not report in absolute coordinates
+    // but will make touchpads act like touch screens
+    if (m_abs)
+        m_abs = getHardwareMaximum();
+
     // socket notifier for events on the mouse device
     QSocketNotifier *notifier;
     notifier = new QSocketNotifier(m_fd, QSocketNotifier::Read, this);
@@ -113,16 +118,66 @@ QEvdevMouseHandler::~QEvdevMouseHandler()
         qt_safe_close(m_fd);
 }
 
+// Ask touch screen hardware for information on coordinate maximums
+// If any ioctls fail, revert to non abs mode
+bool QEvdevMouseHandler::getHardwareMaximum()
+{
+    unsigned char absFeatures[(ABS_MAX / 8) + 1];
+    memset(absFeatures, '\0', sizeof (absFeatures));
+
+    // test if ABS_X, ABS_Y are available
+    if (ioctl(m_fd, EVIOCGBIT(EV_ABS, sizeof (absFeatures)), absFeatures) == -1)
+        return false;
+
+    if ((!TEST_BIT(absFeatures, ABS_X)) || (!TEST_BIT(absFeatures, ABS_Y)))
+        return false;
+
+    // ask hardware for minimum and maximum values
+    struct input_absinfo absInfo;
+    if (ioctl(m_fd, EVIOCGABS(ABS_X), &absInfo) == -1)
+        return false;
+
+    m_hardwareWidth = absInfo.maximum - absInfo.minimum;
+
+    if (ioctl(m_fd, EVIOCGABS(ABS_Y), &absInfo) == -1)
+        return false;
+
+    m_hardwareHeight = absInfo.maximum - absInfo.minimum;
+
+    QRect g = QGuiApplication::primaryScreen()->virtualGeometry();
+    m_hardwareScalerX = static_cast<qreal>(m_hardwareWidth) / (g.right() - g.left());
+    m_hardwareScalerY = static_cast<qreal>(m_hardwareHeight) / (g.bottom() - g.top());
+
+#ifdef QT_QPA_MOUSE_HANDLER_DEBUG
+    qDebug() << "Absolute pointing device";
+    qDebug() << "hardware max x" << m_hardwareWidth;
+    qDebug() << "hardware max y" << m_hardwareHeight;
+    qDebug() << "hardware scalers x" << m_hardwareScalerX << "y" << m_hardwareScalerY;
+#endif
+
+    return true;
+}
+
 void QEvdevMouseHandler::sendMouseEvent()
 {
-    int x = m_x - m_prevx;
-    int y = m_y - m_prevy;
+    int x;
+    int y;
+
+    if (!m_abs) {
+        x = m_x - m_prevx;
+        y = m_y - m_prevy;
+    }
+    else {
+        x = m_x / m_hardwareScalerX;
+        y = m_y / m_hardwareScalerY;
+    }
+
     if (m_prevInvalid) {
         x = y = 0;
         m_prevInvalid = false;
     }
 
-    emit handleMouseEvent(x, y, m_buttons);
+    emit handleMouseEvent(x, y, m_abs, m_buttons);
 
     m_prevx = m_x;
     m_prevy = m_y;
diff --git a/src/platformsupport/input/evdevmouse/qevdevmousehandler_p.h b/src/platformsupport/input/evdevmouse/qevdevmousehandler_p.h
index 5d8a536ee1..cf483c9a91 100644
--- a/src/platformsupport/input/evdevmouse/qevdevmousehandler_p.h
+++ b/src/platformsupport/input/evdevmouse/qevdevmousehandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,26 +60,32 @@ public:
     ~QEvdevMouseHandler();
 
 signals:
-    void handleMouseEvent(int x, int y, Qt::MouseButtons buttons);
+    void handleMouseEvent(int x, int y, bool abs, Qt::MouseButtons buttons);
     void handleWheelEvent(int delta, Qt::Orientation orientation);
 
 private slots:
     void readMouseData();
 
 private:
-    QEvdevMouseHandler(const QString &device, int fd, bool compression, int jitterLimit);
+    QEvdevMouseHandler(const QString &device, int fd, bool abs, bool compression, int jitterLimit);
 
     void sendMouseEvent();
+    bool getHardwareMaximum();
 
     QString m_device;
     int m_fd;
     QSocketNotifier *m_notify;
     int m_x, m_y;
     int m_prevx, m_prevy;
+    bool m_abs;
     bool m_compression;
     Qt::MouseButtons m_buttons;
     int m_jitterLimitSquared;
     bool m_prevInvalid;
+    int m_hardwareWidth;
+    int m_hardwareHeight;
+    qreal m_hardwareScalerY;
+    qreal m_hardwareScalerX;
 };
 
 QT_END_NAMESPACE
diff --git a/src/platformsupport/input/evdevmouse/qevdevmousemanager.cpp b/src/platformsupport/input/evdevmouse/qevdevmousemanager.cpp
index 6c430091c1..2b52c4e995 100644
--- a/src/platformsupport/input/evdevmouse/qevdevmousemanager.cpp
+++ b/src/platformsupport/input/evdevmouse/qevdevmousemanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -111,11 +103,16 @@ QEvdevMouseManager::~QEvdevMouseManager()
     m_mice.clear();
 }
 
-void QEvdevMouseManager::handleMouseEvent(int x, int y, Qt::MouseButtons buttons)
+void QEvdevMouseManager::handleMouseEvent(int x, int y, bool abs, Qt::MouseButtons buttons)
 {
     // update current absolute coordinates
-    m_x += x;
-    m_y += y;
+    if (!abs) {
+        m_x += x;
+        m_y += y;
+    } else {
+        m_x = x;
+        m_y = y;
+    }
 
     // clamp to screen geometry
     QRect g = QGuiApplication::primaryScreen()->virtualGeometry();
@@ -130,7 +127,9 @@ void QEvdevMouseManager::handleMouseEvent(int x, int y, Qt::MouseButtons buttons
         m_y = g.bottom() - m_yoffset;
 
     QPoint pos(m_x + m_xoffset, m_y + m_yoffset);
-    QWindowSystemInterface::handleMouseEvent(0, pos, pos, buttons);
+    // Cannot track the keyboard modifiers ourselves here. Instead, report the
+    // modifiers from the last key event that has been seen by QGuiApplication.
+    QWindowSystemInterface::handleMouseEvent(0, pos, pos, buttons, QGuiApplication::keyboardModifiers());
 
 #ifdef QT_QPA_MOUSEMANAGER_DEBUG
     qDebug("mouse event %d %d %d", pos.x(), pos.y(), int(buttons));
@@ -140,7 +139,7 @@ void QEvdevMouseManager::handleMouseEvent(int x, int y, Qt::MouseButtons buttons
 void QEvdevMouseManager::handleWheelEvent(int delta, Qt::Orientation orientation)
 {
     QPoint pos(m_x + m_xoffset, m_y + m_yoffset);
-    QWindowSystemInterface::handleWheelEvent(0, pos, pos, delta, orientation);
+    QWindowSystemInterface::handleWheelEvent(0, pos, pos, delta, orientation, QGuiApplication::keyboardModifiers());
 
 #ifdef QT_QPA_MOUSEMANAGER_DEBUG
     qDebug("mouse wheel event %dx%d %d %d", pos.x(), pos.y(), delta, int(orientation));
@@ -156,7 +155,7 @@ void QEvdevMouseManager::addMouse(const QString &deviceNode)
     QEvdevMouseHandler *handler;
     handler = QEvdevMouseHandler::create(deviceNode, m_spec);
     if (handler) {
-        connect(handler, SIGNAL(handleMouseEvent(int,int,Qt::MouseButtons)), this, SLOT(handleMouseEvent(int,int,Qt::MouseButtons)));
+        connect(handler, SIGNAL(handleMouseEvent(int,int,bool,Qt::MouseButtons)), this, SLOT(handleMouseEvent(int,int,bool,Qt::MouseButtons)));
         connect(handler, SIGNAL(handleWheelEvent(int,Qt::Orientation)), this, SLOT(handleWheelEvent(int,Qt::Orientation)));
         m_mice.insert(deviceNode, handler);
     } else {
diff --git a/src/platformsupport/input/evdevmouse/qevdevmousemanager_p.h b/src/platformsupport/input/evdevmouse/qevdevmousemanager_p.h
index 662b216b11..14aa6a8fd2 100644
--- a/src/platformsupport/input/evdevmouse/qevdevmousemanager_p.h
+++ b/src/platformsupport/input/evdevmouse/qevdevmousemanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,7 +65,7 @@ public:
     QDeviceDiscovery *deviceDiscovery() { return m_deviceDiscovery; }
 
 public slots:
-    void handleMouseEvent(int x, int y, Qt::MouseButtons buttons);
+    void handleMouseEvent(int x, int y, bool abs, Qt::MouseButtons buttons);
     void handleWheelEvent(int delta, Qt::Orientation orientation);
 
 private slots:
diff --git a/src/platformsupport/input/evdevtablet/qevdevtablet.cpp b/src/platformsupport/input/evdevtablet/qevdevtablet.cpp
index 8b9b69ae23..8d91c49488 100644
--- a/src/platformsupport/input/evdevtablet/qevdevtablet.cpp
+++ b/src/platformsupport/input/evdevtablet/qevdevtablet.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/input/evdevtablet/qevdevtablet_p.h b/src/platformsupport/input/evdevtablet/qevdevtablet_p.h
index f168d8200b..c20ddec787 100644
--- a/src/platformsupport/input/evdevtablet/qevdevtablet_p.h
+++ b/src/platformsupport/input/evdevtablet/qevdevtablet_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/input/evdevtouch/qevdevtouch.cpp b/src/platformsupport/input/evdevtouch/qevdevtouch.cpp
index 563edf4fd7..d0d8b783a4 100644
--- a/src/platformsupport/input/evdevtouch/qevdevtouch.cpp
+++ b/src/platformsupport/input/evdevtouch/qevdevtouch.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -184,6 +176,8 @@ QEvdevTouchScreenHandler::QEvdevTouchScreenHandler(const QString &specification,
 
     QString dev;
     int rotationAngle = 0;
+    bool invertx = false;
+    bool inverty = false;
     for (int i = 0; i < args.count(); ++i) {
         if (args.at(i).startsWith(QLatin1String("/dev/")) && dev.isEmpty()) {
             dev = args.at(i);
@@ -201,6 +195,10 @@ QEvdevTouchScreenHandler::QEvdevTouchScreenHandler(const QString &specification,
                     break;
                 }
             }
+        } else if (args.at(i) == QLatin1String("invertx")) {
+            invertx = true;
+        } else if (args.at(i) == QLatin1String("inverty")) {
+            inverty = true;
         }
     }
 
@@ -326,6 +324,12 @@ QEvdevTouchScreenHandler::QEvdevTouchScreenHandler(const QString &specification,
     if (rotationAngle)
         d->m_rotate = QTransform::fromTranslate(0.5, 0.5).rotate(rotationAngle).translate(-0.5, -0.5);
 
+    if (invertx)
+        d->m_rotate *= QTransform::fromTranslate(0.5, 0.5).scale(-1.0, 1.0).translate(-0.5, -0.5);
+
+    if (inverty)
+        d->m_rotate *= QTransform::fromTranslate(0.5, 0.5).scale(1.0, -1.0).translate(-0.5, -0.5);
+
     d->registerDevice();
 }
 
diff --git a/src/platformsupport/input/evdevtouch/qevdevtouch_p.h b/src/platformsupport/input/evdevtouch/qevdevtouch_p.h
index a5d9e73200..31b2d86834 100644
--- a/src/platformsupport/input/evdevtouch/qevdevtouch_p.h
+++ b/src/platformsupport/input/evdevtouch/qevdevtouch_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/application.cpp b/src/platformsupport/linuxaccessibility/application.cpp
index ae52ab3b57..7d5d189379 100644
--- a/src/platformsupport/linuxaccessibility/application.cpp
+++ b/src/platformsupport/linuxaccessibility/application.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,6 +39,7 @@
 #include <qdebug.h>
 
 #include "deviceeventcontroller_adaptor.h"
+#include "atspi/atspi-constants.h"
 
 //#define KEYBOARD_DEBUG
 
@@ -62,7 +55,7 @@ QT_BEGIN_NAMESPACE
 */
 
 QSpiApplicationAdaptor::QSpiApplicationAdaptor(const QDBusConnection &connection, QObject *parent)
-    : QObject(parent), dbusConnection(connection)
+    : QObject(parent), dbusConnection(connection), inCapsLock(false)
 {
 }
 
@@ -107,13 +100,14 @@ bool QSpiApplicationAdaptor::eventFilter(QObject *target, QEvent *event)
         de.id = keyEvent->nativeVirtualKey();
         de.hardwareCode = keyEvent->nativeScanCode();
 
-        de.modifiers = keyEvent->nativeModifiers();
         de.timestamp = QDateTime::currentMSecsSinceEpoch();
 
         if (keyEvent->key() == Qt::Key_Tab)
             de.text = QStringLiteral("Tab");
         else if (keyEvent->key() == Qt::Key_Backtab)
             de.text = QStringLiteral("Backtab");
+        else if (keyEvent->key() == Qt::Key_Control)
+            de.text = QStringLiteral("Control_L");
         else if (keyEvent->key() == Qt::Key_Left)
             de.text = (keyEvent->modifiers() & Qt::KeypadModifier) ? QStringLiteral("KP_Left") : QStringLiteral("Left");
         else if (keyEvent->key() == Qt::Key_Right)
@@ -142,9 +136,13 @@ bool QSpiApplicationAdaptor::eventFilter(QObject *target, QEvent *event)
             de.text = QStringLiteral("Escape");
         else if (keyEvent->key() == Qt::Key_Space)
             de.text = QStringLiteral("space");
-        else if (keyEvent->key() == Qt::Key_CapsLock)
+        else if (keyEvent->key() == Qt::Key_CapsLock) {
             de.text = QStringLiteral("Caps_Lock");
-        else if (keyEvent->key() == Qt::Key_NumLock)
+            if (event->type() == QEvent::KeyPress)
+                inCapsLock = true;
+            else
+                inCapsLock = false;
+        } else if (keyEvent->key() == Qt::Key_NumLock)
             de.text = QStringLiteral("Num_Lock");
         else if (keyEvent->key() == Qt::Key_Insert)
             de.text = QStringLiteral("Insert");
@@ -155,18 +153,30 @@ bool QSpiApplicationAdaptor::eventFilter(QObject *target, QEvent *event)
         // Long term the spec will hopefully change to just use keycodes.
         de.isText = !de.text.isEmpty();
 
+        de.modifiers = 0;
+        if (!inCapsLock && keyEvent->modifiers() & Qt::ShiftModifier)
+            de.modifiers |= 1 << ATSPI_MODIFIER_SHIFT;
+        if (inCapsLock && (keyEvent->key() != Qt::Key_CapsLock))
+            de.modifiers |= 1 << ATSPI_MODIFIER_SHIFTLOCK;
+        if ((keyEvent->modifiers() & Qt::ControlModifier) && (keyEvent->key() != Qt::Key_Control))
+            de.modifiers |= 1 << ATSPI_MODIFIER_CONTROL;
+        if ((keyEvent->modifiers() & Qt::AltModifier) && (keyEvent->key() != Qt::Key_Alt))
+            de.modifiers |= 1 << ATSPI_MODIFIER_ALT;
+        if ((keyEvent->modifiers() & Qt::MetaModifier) && (keyEvent->key() != Qt::Key_Meta))
+            de.modifiers |= 1 << ATSPI_MODIFIER_META;
+
 #ifdef KEYBOARD_DEBUG
-        qDebug() << QStringLiteral("Key event text: ") << event->type() << de.isText << QStringLiteral(" ") << de.text
-                 << QStringLiteral(" hardware code: ") << de.hardwareCode
-                 << QStringLiteral(" native sc: ") << keyEvent->nativeScanCode()
-                 << QStringLiteral(" native mod: ") << keyEvent->nativeModifiers()
-                 << QStringLiteral("native virt: ") << keyEvent->nativeVirtualKey();
+        qDebug() << QStringLiteral("Key event text:") << event->type() << de.text
+                 << QStringLiteral("native virtual key:") << de.id
+                 << QStringLiteral("hardware code/scancode:") << de.hardwareCode
+                 << QStringLiteral("modifiers:") << de.modifiers
+                 << QStringLiteral("text:") << de.text;
 #endif
 
         QDBusMessage m = QDBusMessage::createMethodCall(QStringLiteral("org.a11y.atspi.Registry"),
                                                         QStringLiteral("/org/a11y/atspi/registry/deviceeventcontroller"),
                                                         QStringLiteral("org.a11y.atspi.DeviceEventController"), QStringLiteral("NotifyListenersSync"));
-        m.setArguments(QVariantList() <<QVariant::fromValue(de));
+        m.setArguments(QVariantList() << QVariant::fromValue(de));
 
         // FIXME: this is critical, the timeout should probably be pretty low to allow normal processing
         int timeout = 100;
@@ -175,9 +185,6 @@ bool QSpiApplicationAdaptor::eventFilter(QObject *target, QEvent *event)
         if (sent) {
             //queue the event and send it after callback
             keyEvents.enqueue(QPair<QPointer<QObject>, QKeyEvent*> (QPointer<QObject>(target), copyKeyEvent(keyEvent)));
-#ifdef KEYBOARD_DEBUG
-            qDebug() << QStringLiteral("Sent key: ") << de.text;
-#endif
             return true;
         }
     }
diff --git a/src/platformsupport/linuxaccessibility/application_p.h b/src/platformsupport/linuxaccessibility/application_p.h
index 9a33c21ab6..d42f6e3ab0 100644
--- a/src/platformsupport/linuxaccessibility/application_p.h
+++ b/src/platformsupport/linuxaccessibility/application_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -89,6 +81,7 @@ private:
 
     QQueue<QPair<QPointer<QObject>, QKeyEvent*> > keyEvents;
     QDBusConnection dbusConnection;
+    bool inCapsLock;
 };
 
 QT_END_NAMESPACE
diff --git a/src/platformsupport/linuxaccessibility/atspiadaptor.cpp b/src/platformsupport/linuxaccessibility/atspiadaptor.cpp
index 84f82cdeda..c3573489e9 100644
--- a/src/platformsupport/linuxaccessibility/atspiadaptor.cpp
+++ b/src/platformsupport/linuxaccessibility/atspiadaptor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,7 @@
 
 #include "socket_interface.h"
 #include "constant_mappings_p.h"
+#include "../accessibility/qaccessiblebridgeutils_p.h"
 
 #include "application_p.h"
 /*!
@@ -910,6 +903,11 @@ void AtSpiAdaptor::notify(QAccessibleEvent *event)
             notifyAboutDestruction(event->accessibleInterface());
         break;
     }
+    case QAccessible::ObjectReorder: {
+        if (sendObject || sendObject_children_changed)
+            childrenChanged(event->accessibleInterface());
+        break;
+    }
     case QAccessible::NameChanged: {
         if (sendObject || sendObject_property_change || sendObject_property_change_accessible_name) {
             QString path = pathForInterface(event->accessibleInterface());
@@ -1078,16 +1076,14 @@ void AtSpiAdaptor::notify(QAccessibleEvent *event)
                 QAccessibleInterface * iface = event->accessibleInterface();
                 if (!iface || !(iface->role() == QAccessible::Window && (sendWindow || sendWindow_activate)))
                     return;
+                int isActive = iface->state().active;
                 QString windowTitle = iface->text(QAccessible::Name);
                 QDBusVariant data;
                 data.setVariant(windowTitle);
                 QVariantList args = packDBusSignalArguments(QString(), 0, 0, QVariant::fromValue(data));
-
-                QString status = iface->state().active ? QLatin1String("Activate") : QLatin1String("Deactivate");
+                QString status = isActive ? QLatin1String("Activate") : QLatin1String("Deactivate");
                 QString path = pathForInterface(iface);
                 sendDBusSignal(path, QLatin1String(ATSPI_DBUS_INTERFACE_EVENT_WINDOW), status, args);
-
-                int isActive = iface->state().active;
                 notifyStateChange(iface, QLatin1String("active"), isActive);
             } else if (stateChange.disabled) {
                 QAccessibleInterface *iface = event->accessibleInterface();
@@ -1150,7 +1146,6 @@ void AtSpiAdaptor::notify(QAccessibleEvent *event)
     case QAccessible::TextAttributeChanged:
     case QAccessible::TextColumnChanged:
     case QAccessible::VisibleDataChanged:
-    case QAccessible::ObjectReorder:
     case QAccessible::SelectionAdd:
     case QAccessible::SelectionWithin:
     case QAccessible::LocationChanged:
@@ -1186,6 +1181,17 @@ void AtSpiAdaptor::sendFocusChanged(QAccessibleInterface *interface) const
     }
 }
 
+void AtSpiAdaptor::childrenChanged(QAccessibleInterface *interface) const
+{
+    QString parentPath = pathForInterface(interface);
+    int childCount = interface->childCount();
+    for (int i = 0; i < interface->childCount(); ++i) {
+        QString childPath = pathForInterface(interface->child(i));
+        QVariantList args = packDBusSignalArguments(QLatin1String("add"), childCount, 0, childPath);
+        sendDBusSignal(parentPath, QLatin1String(ATSPI_DBUS_INTERFACE_EVENT_OBJECT), QLatin1String("ChildrenChanged"), args);
+    }
+}
+
 void AtSpiAdaptor::notifyAboutCreation(QAccessibleInterface *interface) const
 {
 //    // say hello to d-bus
@@ -1472,7 +1478,7 @@ QStringList AtSpiAdaptor::accessibleInterfaces(QAccessibleInterface *interface)
     if (interface->role() == QAccessible::Application)
         ifaces << QLatin1String(ATSPI_DBUS_INTERFACE_APPLICATION);
 
-    if (interface->actionInterface())
+    if (interface->actionInterface() || interface->valueInterface())
         ifaces << QLatin1String(ATSPI_DBUS_INTERFACE_ACTION);
 
     if (interface->textInterface())
@@ -1641,13 +1647,13 @@ bool AtSpiAdaptor::componentInterface(QAccessibleInterface *interface, const QSt
         size << rect.width() << rect.height();
         connection.send(message.createReply(size));
     } else if (function == QLatin1String("GrabFocus")) {
-// FIXME: implement focus grabbing
-//        if (interface->object() && interface->object()->isWidgetType()) {
-//            QWidget* w = static_cast<QWidget*>(interface->object());
-//            w->setFocus(Qt::OtherFocusReason);
-//            sendReply(connection, message, true);
-//        }
-        sendReply(connection, message, false);
+        QAccessibleActionInterface *actionIface = interface->actionInterface();
+        if (actionIface && actionIface->actionNames().contains(QAccessibleActionInterface::setFocusAction())) {
+            actionIface->doAction(QAccessibleActionInterface::setFocusAction());
+            sendReply(connection, message, true);
+        } else {
+            sendReply(connection, message, false);
+        }
     } else if (function == QLatin1String("SetExtents")) {
 //        int x = message.arguments().at(0).toInt();
 //        int y = message.arguments().at(1).toInt();
@@ -1682,36 +1688,44 @@ QRect AtSpiAdaptor::getExtents(QAccessibleInterface *interface, uint coordType)
 // Action interface
 bool AtSpiAdaptor::actionInterface(QAccessibleInterface *interface, const QString &function, const QDBusMessage &message, const QDBusConnection &connection)
 {
-    QAccessibleActionInterface *actionIface = interface->actionInterface();
-    if (!actionIface)
-        return false;
-
     if (function == QLatin1String("GetNActions")) {
-        sendReply(connection, message, QVariant::fromValue(QDBusVariant(QVariant::fromValue(actionIface->actionNames().count()))));
+        int count = QAccessibleBridgeUtils::effectiveActionNames(interface).count();
+        sendReply(connection, message, QVariant::fromValue(QDBusVariant(QVariant::fromValue(count))));
     } else if (function == QLatin1String("DoAction")) {
         int index = message.arguments().at(0).toInt();
-        if (index < 0 || index >= actionIface->actionNames().count())
+        const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(interface);
+        if (index < 0 || index >= actionNames.count())
             return false;
-        interface->actionInterface()->doAction(actionIface->actionNames().at(index));
-        sendReply(connection, message, true);
+        const QString actionName = actionNames.at(index);
+        bool success = QAccessibleBridgeUtils::performEffectiveAction(interface, actionName);
+        sendReply(connection, message, success);
     } else if (function == QLatin1String("GetActions")) {
-        sendReply(connection, message, QVariant::fromValue(getActions(actionIface)));
+        sendReply(connection, message, QVariant::fromValue(getActions(interface)));
     } else if (function == QLatin1String("GetName")) {
         int index = message.arguments().at(0).toInt();
-        if (index < 0 || index >= actionIface->actionNames().count())
+        const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(interface);
+        if (index < 0 || index >= actionNames.count())
             return false;
-        sendReply(connection, message, actionIface->actionNames().at(index));
+        sendReply(connection, message, actionNames.at(index));
     } else if (function == QLatin1String("GetDescription")) {
         int index = message.arguments().at(0).toInt();
-        if (index < 0 || index >= actionIface->actionNames().count())
+        const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(interface);
+        if (index < 0 || index >= actionNames.count())
             return false;
-        sendReply(connection, message, actionIface->localizedActionDescription(actionIface->actionNames().at(index)));
+        QString description;
+        if (QAccessibleActionInterface *actionIface = interface->actionInterface())
+            description = actionIface->localizedActionDescription(actionNames.at(index));
+        else
+            description = qAccessibleLocalizedActionDescription(actionNames.at(index));
+        sendReply(connection, message, description);
     } else if (function == QLatin1String("GetKeyBinding")) {
         int index = message.arguments().at(0).toInt();
-        if (index < 0 || index >= actionIface->actionNames().count())
+        const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(interface);
+        if (index < 0 || index >= actionNames.count())
             return false;
         QStringList keyBindings;
-        keyBindings = actionIface->keyBindingsForAction(actionIface->actionNames().value(index));
+        if (QAccessibleActionInterface *actionIface = interface->actionInterface())
+            keyBindings = actionIface->keyBindingsForAction(actionNames.at(index));
         if (keyBindings.isEmpty()) {
             QString acc = interface->text(QAccessible::Accelerator);
             if (!acc.isEmpty())
@@ -1728,20 +1742,24 @@ bool AtSpiAdaptor::actionInterface(QAccessibleInterface *interface, const QStrin
     return true;
 }
 
-QSpiActionArray AtSpiAdaptor::getActions(QAccessibleActionInterface *actionInterface) const
+QSpiActionArray AtSpiAdaptor::getActions(QAccessibleInterface *interface) const
 {
+    QAccessibleActionInterface *actionInterface = interface->actionInterface();
     QSpiActionArray actions;
-    Q_FOREACH (const QString &actionName, actionInterface->actionNames()) {
+    Q_FOREACH (const QString &actionName, QAccessibleBridgeUtils::effectiveActionNames(interface)) {
         QSpiAction action;
         QStringList keyBindings;
 
         action.name = actionName;
-        action.description = actionInterface->localizedActionDescription(actionName);
-
-        keyBindings = actionInterface->keyBindingsForAction(actionName);
+        if (actionInterface) {
+            action.description = actionInterface->localizedActionDescription(actionName);
+            keyBindings = actionInterface->keyBindingsForAction(actionName);
+        } else {
+            action.description = qAccessibleLocalizedActionDescription(actionName);
+        }
 
         if (keyBindings.length() > 0)
-                action.keyBinding = keyBindings[0];
+            action.keyBinding = keyBindings[0];
         else
             action.keyBinding = QString();
 
@@ -1952,17 +1970,17 @@ QVariantList AtSpiAdaptor::getAttributeValue(QAccessibleInterface *interface, in
     return list;
 }
 
-QRect AtSpiAdaptor::getCharacterExtents(QAccessibleInterface *interface, int offset, uint coordType) const
+QList<QVariant> AtSpiAdaptor::getCharacterExtents(QAccessibleInterface *interface, int offset, uint coordType) const
 {
     QRect rect = interface->textInterface()->characterRect(offset);
 
     if (coordType == ATSPI_COORD_TYPE_WINDOW)
         rect = translateRectToWindowCoordinates(interface, rect);
 
-    return rect;
+    return QList<QVariant>() << rect.x() << rect.y() << rect.width() << rect.height();
 }
 
-QRect AtSpiAdaptor::getRangeExtents(QAccessibleInterface *interface,
+QList<QVariant> AtSpiAdaptor::getRangeExtents(QAccessibleInterface *interface,
                                             int startOffset, int endOffset, uint coordType) const
 {
     if (endOffset == -1)
@@ -1970,7 +1988,7 @@ QRect AtSpiAdaptor::getRangeExtents(QAccessibleInterface *interface,
 
     QAccessibleTextInterface *textInterface = interface->textInterface();
     if (endOffset <= startOffset || !textInterface)
-        return QRect();
+        return QList<QVariant>() << -1 << -1 << 0 << 0;
 
     QRect rect = textInterface->characterRect(startOffset);
     for (int i=startOffset + 1; i <= endOffset; i++)
@@ -1980,7 +1998,7 @@ QRect AtSpiAdaptor::getRangeExtents(QAccessibleInterface *interface,
     if (coordType == ATSPI_COORD_TYPE_WINDOW)
         rect = translateRectToWindowCoordinates(interface, rect);
 
-    return rect;
+    return QList<QVariant>() << rect.x() << rect.y() << rect.width() << rect.height();
 }
 
 QRect AtSpiAdaptor::translateRectToWindowCoordinates(QAccessibleInterface *interface, const QRect &rect)
diff --git a/src/platformsupport/linuxaccessibility/atspiadaptor_p.h b/src/platformsupport/linuxaccessibility/atspiadaptor_p.h
index 8e7f55fdbc..fa3f616c91 100644
--- a/src/platformsupport/linuxaccessibility/atspiadaptor_p.h
+++ b/src/platformsupport/linuxaccessibility/atspiadaptor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -102,6 +94,7 @@ private:
     void sendFocusChanged(QAccessibleInterface *interface) const;
     void notifyAboutCreation(QAccessibleInterface *interface) const;
     void notifyAboutDestruction(QAccessibleInterface *interface) const;
+    void childrenChanged(QAccessibleInterface *interface) const;
 
     // handlers for the different accessible interfaces
     bool applicationInterface(QAccessibleInterface *interface, const QString &function, const QDBusMessage &message, const QDBusConnection &connection);
@@ -131,13 +124,13 @@ private:
     static QRect translateRectToWindowCoordinates(QAccessibleInterface *interface, const QRect &rect);
 
     // action helper functions
-    QSpiActionArray getActions(QAccessibleActionInterface* interface) const;
+    QSpiActionArray getActions(QAccessibleInterface *interface) const;
 
     // text helper functions
     QVariantList getAttributes(QAccessibleInterface *, int offset, bool includeDefaults) const;
     QVariantList getAttributeValue(QAccessibleInterface *, int offset, const QString &attributeName) const;
-    QRect getCharacterExtents(QAccessibleInterface *, int offset, uint coordType) const;
-    QRect getRangeExtents(QAccessibleInterface *, int startOffset, int endOffset, uint coordType) const;
+    QList<QVariant> getCharacterExtents(QAccessibleInterface *, int offset, uint coordType) const;
+    QList<QVariant> getRangeExtents(QAccessibleInterface *, int startOffset, int endOffset, uint coordType) const;
     QAccessible::TextBoundaryType qAccessibleBoundaryType(int atspiTextBoundaryType) const;
     static bool inheritsQAction(QObject *object);
 
diff --git a/src/platformsupport/linuxaccessibility/bridge.cpp b/src/platformsupport/linuxaccessibility/bridge.cpp
index 350c67f1ed..6211aa6e5a 100644
--- a/src/platformsupport/linuxaccessibility/bridge.cpp
+++ b/src/platformsupport/linuxaccessibility/bridge.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -135,8 +127,8 @@ static RoleMapping map[] = {
     { QAccessible::Caret, ATSPI_ROLE_UNKNOWN, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "text caret") },
     //: Role of an accessible object
     { QAccessible::AlertMessage, ATSPI_ROLE_ALERT, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "alert message") },
-    //: Role of an accessible object
-    { QAccessible::Window, ATSPI_ROLE_WINDOW, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "window") },
+    //: Role of an accessible object: a window with frame and title
+    { QAccessible::Window, ATSPI_ROLE_FRAME, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "frame") },
     //: Role of an accessible object
     { QAccessible::Client, ATSPI_ROLE_FILLER, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "filler") },
     //: Role of an accessible object
@@ -244,6 +236,24 @@ static RoleMapping map[] = {
     //: Role of an accessible object
     { QAccessible::LayeredPane, ATSPI_ROLE_LAYERED_PANE, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "layered pane") },
     //: Role of an accessible object
+    { QAccessible::WebDocument, ATSPI_ROLE_DOCUMENT_WEB, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "web document") },
+    //: Role of an accessible object
+    { QAccessible::Paragraph, ATSPI_ROLE_PARAGRAPH, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "paragraph") },
+    //: Role of an accessible object
+    { QAccessible::Section, ATSPI_ROLE_SECTION, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "section") },
+    //: Role of an accessible object
+    { QAccessible::ColorChooser, ATSPI_ROLE_COLOR_CHOOSER, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "color chooser") },
+    //: Role of an accessible object
+    { QAccessible::Footer, ATSPI_ROLE_FOOTER, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "footer") },
+    //: Role of an accessible object
+    { QAccessible::Form, ATSPI_ROLE_FORM, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "form") },
+    //: Role of an accessible object
+    { QAccessible::Heading, ATSPI_ROLE_HEADING, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "heading") },
+    //: Role of an accessible object
+    { QAccessible::Note, ATSPI_ROLE_COMMENT, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "note") },
+    //: Role of an accessible object
+    { QAccessible::ComplementaryContent, ATSPI_ROLE_SECTION, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "complementary content") },
+    //: Role of an accessible object
     { QAccessible::UserRole, ATSPI_ROLE_UNKNOWN, QT_TRANSLATE_NOOP("QSpiAccessibleBridge", "unknown") }
 };
 
diff --git a/src/platformsupport/linuxaccessibility/bridge_p.h b/src/platformsupport/linuxaccessibility/bridge_p.h
index f4b1680b15..1daaaf92d2 100644
--- a/src/platformsupport/linuxaccessibility/bridge_p.h
+++ b/src/platformsupport/linuxaccessibility/bridge_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/cache.cpp b/src/platformsupport/linuxaccessibility/cache.cpp
index f9d519b9cd..296858c391 100644
--- a/src/platformsupport/linuxaccessibility/cache.cpp
+++ b/src/platformsupport/linuxaccessibility/cache.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/cache_p.h b/src/platformsupport/linuxaccessibility/cache_p.h
index 8f262cba55..300084c493 100644
--- a/src/platformsupport/linuxaccessibility/cache_p.h
+++ b/src/platformsupport/linuxaccessibility/cache_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/constant_mappings.cpp b/src/platformsupport/linuxaccessibility/constant_mappings.cpp
index 9de667158b..78f18124e5 100644
--- a/src/platformsupport/linuxaccessibility/constant_mappings.cpp
+++ b/src/platformsupport/linuxaccessibility/constant_mappings.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/constant_mappings_p.h b/src/platformsupport/linuxaccessibility/constant_mappings_p.h
index 9e653feb66..f616b56c3a 100644
--- a/src/platformsupport/linuxaccessibility/constant_mappings_p.h
+++ b/src/platformsupport/linuxaccessibility/constant_mappings_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/dbusconnection.cpp b/src/platformsupport/linuxaccessibility/dbusconnection.cpp
index 18915f8e08..d103f9d097 100644
--- a/src/platformsupport/linuxaccessibility/dbusconnection.cpp
+++ b/src/platformsupport/linuxaccessibility/dbusconnection.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -84,8 +76,14 @@ void DBusConnection::serviceRegistered()
     QDBusConnection c = QDBusConnection::sessionBus();
     OrgA11yStatusInterface *a11yStatus = new OrgA11yStatusInterface(A11Y_SERVICE, A11Y_PATH, c, this);
 
+    //The variable was introduced because on some embedded platforms there are custom accessibility
+    //clients which don't set Status.ScreenReaderEnabled to true. The variable is also useful for
+    //debugging.
+    static const bool a11yAlwaysOn = qEnvironmentVariableIsSet("QT_LINUX_ACCESSIBILITY_ALWAYS_ON");
+
     // a11yStatus->isEnabled() returns always true (since Gnome 3.6)
-    bool enabled = a11yStatus->screenReaderEnabled();
+    bool enabled = a11yAlwaysOn || a11yStatus->screenReaderEnabled();
+
     if (enabled != m_enabled) {
         m_enabled = enabled;
         if (m_a11yConnection.isConnected()) {
diff --git a/src/platformsupport/linuxaccessibility/dbusconnection_p.h b/src/platformsupport/linuxaccessibility/dbusconnection_p.h
index 1e75a10de8..0dbb964c2f 100644
--- a/src/platformsupport/linuxaccessibility/dbusconnection_p.h
+++ b/src/platformsupport/linuxaccessibility/dbusconnection_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/linuxaccessibility.pri b/src/platformsupport/linuxaccessibility/linuxaccessibility.pri
index 1b65fb1cad..1d51d2876c 100644
--- a/src/platformsupport/linuxaccessibility/linuxaccessibility.pri
+++ b/src/platformsupport/linuxaccessibility/linuxaccessibility.pri
@@ -2,6 +2,7 @@ contains(QT_CONFIG, accessibility-atspi-bridge) {
 
     QT_FOR_PRIVATE += dbus
     include(../../3rdparty/atspi2/atspi2.pri)
+    include(../accessibility/accessibility.pri)
 
     INCLUDEPATH += $$PWD
 
diff --git a/src/platformsupport/linuxaccessibility/struct_marshallers.cpp b/src/platformsupport/linuxaccessibility/struct_marshallers.cpp
index a5b663bfec..4b3bee8bdb 100644
--- a/src/platformsupport/linuxaccessibility/struct_marshallers.cpp
+++ b/src/platformsupport/linuxaccessibility/struct_marshallers.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/linuxaccessibility/struct_marshallers_p.h b/src/platformsupport/linuxaccessibility/struct_marshallers_p.h
index 8f7da0df9a..21e2fdefa5 100644
--- a/src/platformsupport/linuxaccessibility/struct_marshallers_p.h
+++ b/src/platformsupport/linuxaccessibility/struct_marshallers_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/platformsupport.pro b/src/platformsupport/platformsupport.pro
index 5b4d2b1fb3..32ce2e3887 100644
--- a/src/platformsupport/platformsupport.pro
+++ b/src/platformsupport/platformsupport.pro
@@ -18,6 +18,7 @@ include(input/input.pri)
 include(devicediscovery/devicediscovery.pri)
 include(services/services.pri)
 include(themes/themes.pri)
+include(accessibility/accessibility.pri)
 include(linuxaccessibility/linuxaccessibility.pri)
 include(clipboard/clipboard.pri)
 
diff --git a/src/platformsupport/services/genericunix/qgenericunixservices.cpp b/src/platformsupport/services/genericunix/qgenericunixservices.cpp
index 77ea0f1db8..6f13b693d8 100644
--- a/src/platformsupport/services/genericunix/qgenericunixservices.cpp
+++ b/src/platformsupport/services/genericunix/qgenericunixservices.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/services/genericunix/qgenericunixservices_p.h b/src/platformsupport/services/genericunix/qgenericunixservices_p.h
index d758c71b79..f24912278b 100644
--- a/src/platformsupport/services/genericunix/qgenericunixservices_p.h
+++ b/src/platformsupport/services/genericunix/qgenericunixservices_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/platformsupport/themes/genericunix/qgenericunixthemes.cpp b/src/platformsupport/themes/genericunix/qgenericunixthemes.cpp
index 4a1d67f4b5..83ecaf3cf1 100644
--- a/src/platformsupport/themes/genericunix/qgenericunixthemes.cpp
+++ b/src/platformsupport/themes/genericunix/qgenericunixthemes.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,7 @@
 #include <QtCore/QFileInfo>
 #include <QtCore/QFile>
 #include <QtCore/QDebug>
+#include <QtCore/QHash>
 #include <QtCore/QSettings>
 #include <QtCore/QVariant>
 #include <QtCore/QStringList>
@@ -171,26 +164,26 @@ QVariant QGenericUnixTheme::themeHint(ThemeHint hint) const
 class QKdeThemePrivate : public QPlatformThemePrivate
 {
 public:
-    QKdeThemePrivate(const QString &kdeHome, int kdeVersion)
-        : kdeHome(kdeHome)
+    QKdeThemePrivate(const QStringList &kdeDirs, int kdeVersion)
+        : kdeDirs(kdeDirs)
         , kdeVersion(kdeVersion)
         , toolButtonStyle(Qt::ToolButtonTextBesideIcon)
         , toolBarIconSize(0)
         , singleClick(true)
     { }
 
-    QString globalSettingsFile() const
+    static QString kdeGlobals(const QString &kdeDir)
     {
-        return kdeHome + QStringLiteral("/share/config/kdeglobals");
+        return kdeDir + QStringLiteral("/share/config/kdeglobals");
     }
 
     void refresh();
-    static void readKdeSystemPalette(const QSettings &kdeSettings, QPalette *pal);
-    static QFont *readKdeFontSetting(const QSettings &settings, const QString &key);
-    static QStringList kdeIconThemeSearchPaths(const QString &kdeHome);
+    static QVariant readKdeSetting(const QString &key, const QStringList &kdeDirs, QHash<QString, QSettings*> &kdeSettings);
+    static void readKdeSystemPalette(const QStringList &kdeDirs, QHash<QString, QSettings*> &kdeSettings, QPalette *pal);
+    static QFont *kdeFont(const QVariant &fontValue);
+    static QStringList kdeIconThemeSearchPaths(const QStringList &kdeDirs);
 
-
-    const QString kdeHome;
+    const QStringList kdeDirs;
     const int kdeVersion;
 
     ResourceHelper resources;
@@ -212,36 +205,33 @@ void QKdeThemePrivate::refresh()
     styleNames << QStringLiteral("Oxygen") << QStringLiteral("fusion") << QStringLiteral("windows");
     iconFallbackThemeName = iconThemeName = QStringLiteral("oxygen");
 
-    // Read settings file.
-    const QString settingsFile = globalSettingsFile();
-    if (!QFileInfo(settingsFile).isReadable())
-        return;
-
-    const QSettings kdeSettings(settingsFile, QSettings::IniFormat);
+    QHash<QString, QSettings*> kdeSettings;
 
     QPalette systemPalette = QPalette();
-    readKdeSystemPalette(kdeSettings, &systemPalette);
+    readKdeSystemPalette(kdeDirs, kdeSettings, &systemPalette);
     resources.palettes[QPlatformTheme::SystemPalette] = new QPalette(systemPalette);
     //## TODO tooltip color
 
-    const QVariant styleValue = kdeSettings.value(QStringLiteral("widgetStyle"));
+    const QVariant styleValue = readKdeSetting(QStringLiteral("widgetStyle"), kdeDirs, kdeSettings);
     if (styleValue.isValid()) {
         const QString style = styleValue.toString();
         if (style != styleNames.front())
             styleNames.push_front(style);
     }
 
-    singleClick = kdeSettings.value(QStringLiteral("KDE/SingleClick"), true).toBool();
+    const QVariant singleClickValue = readKdeSetting(QStringLiteral("KDE/SingleClick"), kdeDirs, kdeSettings);
+    if (singleClickValue.isValid())
+        singleClick = singleClickValue.toBool();
 
-    const QVariant themeValue = kdeSettings.value(QStringLiteral("Icons/Theme"));
+    const QVariant themeValue = readKdeSetting(QStringLiteral("Icons/Theme"), kdeDirs, kdeSettings);
     if (themeValue.isValid())
         iconThemeName = themeValue.toString();
 
-    const QVariant toolBarIconSizeValue = kdeSettings.value(QStringLiteral("ToolbarIcons/Size"));
+    const QVariant toolBarIconSizeValue = readKdeSetting(QStringLiteral("ToolbarIcons/Size"), kdeDirs, kdeSettings);
     if (toolBarIconSizeValue.isValid())
         toolBarIconSize = toolBarIconSizeValue.toInt();
 
-    const QVariant toolbarStyleValue = kdeSettings.value(QStringLiteral("ToolButtonStyle"));
+    const QVariant toolbarStyleValue = readKdeSetting(QStringLiteral("Toolbar style/ToolButtonStyle"), kdeDirs, kdeSettings);
     if (toolbarStyleValue.isValid()) {
         const QString toolBarStyle = toolbarStyleValue.toString();
         if (toolBarStyle == QStringLiteral("TextBesideIcon"))
@@ -253,26 +243,46 @@ void QKdeThemePrivate::refresh()
     }
 
     // Read system font, ignore 'smallestReadableFont'
-    if (QFont *systemFont = readKdeFontSetting(kdeSettings, QStringLiteral("font")))
+    if (QFont *systemFont = kdeFont(readKdeSetting(QStringLiteral("font"), kdeDirs, kdeSettings)))
         resources.fonts[QPlatformTheme::SystemFont] = systemFont;
     else
         resources.fonts[QPlatformTheme::SystemFont] = new QFont(QLatin1String(defaultSystemFontNameC), defaultSystemFontSize);
 
-    if (QFont *fixedFont = readKdeFontSetting(kdeSettings, QStringLiteral("fixed"))) {
+    if (QFont *fixedFont = kdeFont(readKdeSetting(QStringLiteral("fixed"), kdeDirs, kdeSettings))) {
         resources.fonts[QPlatformTheme::FixedFont] = fixedFont;
     } else {
         fixedFont = new QFont(QLatin1String(defaultSystemFontNameC), defaultSystemFontSize);
         fixedFont->setStyleHint(QFont::TypeWriter);
         resources.fonts[QPlatformTheme::FixedFont] = fixedFont;
     }
+
+    qDeleteAll(kdeSettings);
+}
+
+QVariant QKdeThemePrivate::readKdeSetting(const QString &key, const QStringList &kdeDirs, QHash<QString, QSettings*> &kdeSettings)
+{
+    foreach (const QString &kdeDir, kdeDirs) {
+        QSettings *settings = kdeSettings.value(kdeDir);
+        if (!settings) {
+            const QString kdeGlobalsPath = kdeGlobals(kdeDir);
+            if (QFileInfo(kdeGlobalsPath).isReadable()) {
+                settings = new QSettings(kdeGlobalsPath, QSettings::IniFormat);
+                kdeSettings.insert(kdeDir, settings);
+            }
+        }
+        if (settings) {
+            const QVariant value = settings->value(key);
+            if (value.isValid())
+                return value;
+        }
+    }
+    return QVariant();
 }
 
 // Reads the color from the KDE configuration, and store it in the
 // palette with the given color role if found.
-static inline bool kdeColor(QPalette *pal, QPalette::ColorRole role,
-                            const QSettings &kdeSettings, const QString &key)
+static inline bool kdeColor(QPalette *pal, QPalette::ColorRole role, const QVariant &value)
 {
-    const QVariant value = kdeSettings.value(key);
     if (!value.isValid())
         return false;
     const QStringList values = value.toStringList();
@@ -282,9 +292,9 @@ static inline bool kdeColor(QPalette *pal, QPalette::ColorRole role,
     return true;
 }
 
-void QKdeThemePrivate::readKdeSystemPalette(const QSettings &kdeSettings, QPalette *pal)
+void QKdeThemePrivate::readKdeSystemPalette(const QStringList &kdeDirs, QHash<QString, QSettings*> &kdeSettings, QPalette *pal)
 {
-    if (!kdeSettings.contains(QStringLiteral("Colors:Button/BackgroundNormal"))) {
+    if (!kdeColor(pal, QPalette::Button, readKdeSetting(QStringLiteral("Colors:Button/BackgroundNormal"), kdeDirs, kdeSettings))) {
         // kcolorscheme.cpp: SetDefaultColors
         const QColor defaultWindowBackground(214, 210, 208);
         const QColor defaultButtonBackground(223, 220, 217);
@@ -292,19 +302,18 @@ void QKdeThemePrivate::readKdeSystemPalette(const QSettings &kdeSettings, QPalet
         return;
     }
 
-    kdeColor(pal, QPalette::Button, kdeSettings, QStringLiteral("Colors:Button/BackgroundNormal"));
-    kdeColor(pal, QPalette::Window, kdeSettings, QStringLiteral("Colors:Window/BackgroundNormal"));
-    kdeColor(pal, QPalette::Text, kdeSettings, QStringLiteral("Colors:View/ForegroundNormal"));
-    kdeColor(pal, QPalette::WindowText, kdeSettings, QStringLiteral("Colors:Window/ForegroundNormal"));
-    kdeColor(pal, QPalette::Base, kdeSettings, QStringLiteral("Colors:View/BackgroundNormal"));
-    kdeColor(pal, QPalette::Highlight, kdeSettings, QStringLiteral("Colors:Selection/BackgroundNormal"));
-    kdeColor(pal, QPalette::HighlightedText, kdeSettings, QStringLiteral("Colors:Selection/ForegroundNormal"));
-    kdeColor(pal, QPalette::AlternateBase, kdeSettings, QStringLiteral("Colors:View/BackgroundAlternate"));
-    kdeColor(pal, QPalette::ButtonText, kdeSettings, QStringLiteral("Colors:Button/ForegroundNormal"));
-    kdeColor(pal, QPalette::Link, kdeSettings, QStringLiteral("Colors:View/ForegroundLink"));
-    kdeColor(pal, QPalette::LinkVisited, kdeSettings, QStringLiteral("Colors:View/ForegroundVisited"));
-    kdeColor(pal, QPalette::ToolTipBase, kdeSettings, QStringLiteral("Colors:Tooltip/BackgroundNormal"));
-    kdeColor(pal, QPalette::ToolTipText, kdeSettings, QStringLiteral("Colors:Tooltip/ForegroundNormal"));
+    kdeColor(pal, QPalette::Window, readKdeSetting(QStringLiteral("Colors:Window/BackgroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::Text, readKdeSetting(QStringLiteral("Colors:View/ForegroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::WindowText, readKdeSetting(QStringLiteral("Colors:Window/ForegroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::Base, readKdeSetting(QStringLiteral("Colors:View/BackgroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::Highlight, readKdeSetting(QStringLiteral("Colors:Selection/BackgroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::HighlightedText, readKdeSetting(QStringLiteral("Colors:Selection/ForegroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::AlternateBase, readKdeSetting(QStringLiteral("Colors:View/BackgroundAlternate"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::ButtonText, readKdeSetting(QStringLiteral("Colors:Button/ForegroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::Link, readKdeSetting(QStringLiteral("Colors:View/ForegroundLink"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::LinkVisited, readKdeSetting(QStringLiteral("Colors:View/ForegroundVisited"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::ToolTipBase, readKdeSetting(QStringLiteral("Colors:Tooltip/BackgroundNormal"), kdeDirs, kdeSettings));
+    kdeColor(pal, QPalette::ToolTipText, readKdeSetting(QStringLiteral("Colors:Tooltip/ForegroundNormal"), kdeDirs, kdeSettings));
 
     // The above code sets _all_ color roles to "normal" colors. In KDE, the disabled
     // color roles are calculated by applying various effects described in kdeglobals.
@@ -347,15 +356,14 @@ void QKdeThemePrivate::readKdeSystemPalette(const QSettings &kdeSettings, QPalet
 
 const char *QKdeTheme::name = "kde";
 
-QKdeTheme::QKdeTheme(const QString &kdeHome, int kdeVersion)
-    : QPlatformTheme(new QKdeThemePrivate(kdeHome,kdeVersion))
+QKdeTheme::QKdeTheme(const QStringList& kdeDirs, int kdeVersion)
+    : QPlatformTheme(new QKdeThemePrivate(kdeDirs,kdeVersion))
 {
     d_func()->refresh();
 }
 
-QFont *QKdeThemePrivate::readKdeFontSetting(const QSettings &settings, const QString &key)
+QFont *QKdeThemePrivate::kdeFont(const QVariant &fontValue)
 {
-    const QVariant fontValue = settings.value(key);
     if (fontValue.isValid()) {
         // Read font value: Might be a QStringList as KDE stores fonts without quotes.
         // Also retrieve the family for the constructor since we cannot use the
@@ -382,16 +390,11 @@ QFont *QKdeThemePrivate::readKdeFontSetting(const QSettings &settings, const QSt
 }
 
 
-QStringList QKdeThemePrivate::kdeIconThemeSearchPaths(const QString &kdeHome)
+QStringList QKdeThemePrivate::kdeIconThemeSearchPaths(const QStringList &kdeDirs)
 {
-    QStringList candidates = QStringList(kdeHome);
-    const QString kdeDirs = QFile::decodeName(qgetenv("KDEDIRS"));
-    if (!kdeDirs.isEmpty())
-        candidates.append(kdeDirs.split(QLatin1Char(':')));
-
     QStringList paths = QGenericUnixTheme::xdgIconThemePaths();
     const QString iconPath = QStringLiteral("/share/icons");
-    foreach (const QString &candidate, candidates) {
+    foreach (const QString &candidate, kdeDirs) {
         const QFileInfo fi(candidate + iconPath);
         if (fi.isDir())
             paths.append(fi.absoluteFilePath());
@@ -418,7 +421,7 @@ QVariant QKdeTheme::themeHint(QPlatformTheme::ThemeHint hint) const
     case QPlatformTheme::SystemIconFallbackThemeName:
         return QVariant(d->iconFallbackThemeName);
     case QPlatformTheme::IconThemeSearchPaths:
-        return QVariant(d->kdeIconThemeSearchPaths(d->kdeHome));
+        return QVariant(d->kdeIconThemeSearchPaths(d->kdeDirs));
     case QPlatformTheme::StyleNames:
         return QVariant(d->styleNames);
     case QPlatformTheme::KeyboardScheme:
@@ -445,26 +448,52 @@ const QFont *QKdeTheme::font(Font type) const
 
 QPlatformTheme *QKdeTheme::createKdeTheme()
 {
-    // Check for version >= 4 and determine home folder from environment,
-    // defaulting to ~/.kde<version>, ~/.kde
     const QByteArray kdeVersionBA = qgetenv("KDE_SESSION_VERSION");
     const int kdeVersion = kdeVersionBA.toInt();
     if (kdeVersion < 4)
         return 0;
-    const QString kdeHomePathVar = QString::fromLocal8Bit(qgetenv("KDEHOME"));
+
+    // Determine KDE prefixes in the following priority order:
+    // - KDEHOME and KDEDIRS environment variables
+    // - ~/.kde(<version>)
+    // - read prefixes from /etc/kde<version>rc
+    // - fallback to /etc/kde<version>
+
+    QStringList kdeDirs;
+    const QString kdeHomePathVar = QFile::decodeName(qgetenv("KDEHOME"));
     if (!kdeHomePathVar.isEmpty())
-        return new QKdeTheme(kdeHomePathVar, kdeVersion);
+        kdeDirs += kdeHomePathVar;
 
-     const QString kdeVersionHomePath = QDir::homePath() + QStringLiteral("/.kde") + QLatin1String(kdeVersionBA);
-     if (QFileInfo(kdeVersionHomePath).isDir())
-         return new QKdeTheme(kdeVersionHomePath, kdeVersion);
+    const QString kdeDirsVar = QFile::decodeName(qgetenv("KDEDIRS"));
+    if (!kdeDirsVar.isEmpty())
+        kdeDirs += kdeDirsVar.split(QLatin1Char(':'), QString::SkipEmptyParts);
 
-     const QString kdeHomePath = QDir::homePath() + QStringLiteral("/.kde");
-     if (QFileInfo(kdeHomePath).isDir())
-         return new QKdeTheme(kdeHomePath, kdeVersion);
+    const QString kdeVersionHomePath = QDir::homePath() + QStringLiteral("/.kde") + QLatin1String(kdeVersionBA);
+    if (QFileInfo(kdeVersionHomePath).isDir())
+        kdeDirs += kdeVersionHomePath;
 
-     qWarning("%s: Unable to determine KDEHOME", Q_FUNC_INFO);
-     return 0;
+    const QString kdeHomePath = QDir::homePath() + QStringLiteral("/.kde");
+    if (QFileInfo(kdeHomePath).isDir())
+        kdeDirs += kdeHomePath;
+
+    const QString kdeRcPath = QStringLiteral("/etc/kde") + QLatin1String(kdeVersionBA) + QStringLiteral("rc");
+    if (QFileInfo(kdeRcPath).isReadable()) {
+        QSettings kdeSettings(kdeRcPath, QSettings::IniFormat);
+        kdeSettings.beginGroup(QStringLiteral("Directories-default"));
+        kdeDirs += kdeSettings.value(QStringLiteral("prefixes")).toStringList();
+    }
+
+    const QString kdeVersionPrefix = QStringLiteral("/etc/kde") + QLatin1String(kdeVersionBA);
+    if (QFileInfo(kdeVersionPrefix).isDir())
+        kdeDirs += kdeVersionPrefix;
+
+    kdeDirs.removeDuplicates();
+    if (kdeDirs.isEmpty()) {
+        qWarning("%s: Unable to determine KDE dirs", Q_FUNC_INFO);
+        return 0;
+    }
+
+    return new QKdeTheme(kdeDirs, kdeVersion);
 }
 
 #endif // QT_NO_SETTINGS
@@ -482,15 +511,23 @@ const char *QGnomeTheme::name = "gnome";
 class QGnomeThemePrivate : public QPlatformThemePrivate
 {
 public:
-    QGnomeThemePrivate()
-        : systemFont(QLatin1Literal(defaultSystemFontNameC), defaultSystemFontSize)
-        , fixedFont(QStringLiteral("monospace"), systemFont.pointSize())
+    QGnomeThemePrivate() : fontsConfigured(false) { }
+    void configureFonts(QString gtkFontName) const
     {
+        Q_ASSERT(!fontsConfigured);
+        const int split = gtkFontName.lastIndexOf(QChar::Space);
+        float size = gtkFontName.mid(split+1).toFloat();
+        QString fontName = gtkFontName.left(split);
+
+        systemFont = QFont(fontName, size);
+        fixedFont = QFont(QLatin1String("monospace"), systemFont.pointSize());
         fixedFont.setStyleHint(QFont::TypeWriter);
+        fontsConfigured = true;
     }
 
-    const QFont systemFont;
-    QFont fixedFont;
+    mutable QFont systemFont;
+    mutable QFont fixedFont;
+    mutable bool fontsConfigured;
 };
 
 QGnomeTheme::QGnomeTheme()
@@ -528,9 +565,11 @@ QVariant QGnomeTheme::themeHint(QPlatformTheme::ThemeHint hint) const
 const QFont *QGnomeTheme::font(Font type) const
 {
     Q_D(const QGnomeTheme);
+    if (!d->fontsConfigured)
+        d->configureFonts(gtkFontName());
     switch (type) {
     case QPlatformTheme::SystemFont:
-        return  &d->systemFont;
+        return &d->systemFont;
     case QPlatformTheme::FixedFont:
         return &d->fixedFont;
     default:
@@ -538,6 +577,11 @@ const QFont *QGnomeTheme::font(Font type) const
     }
 }
 
+QString QGnomeTheme::gtkFontName() const
+{
+    return QStringLiteral("%1 %2").arg(QLatin1String(defaultSystemFontNameC)).arg(defaultSystemFontSize);
+}
+
 QString QGnomeTheme::standardButtonText(int button) const
 {
     switch (button) {
diff --git a/src/platformsupport/themes/genericunix/qgenericunixthemes_p.h b/src/platformsupport/themes/genericunix/qgenericunixthemes_p.h
index b8f6737ea0..87df37dfd7 100644
--- a/src/platformsupport/themes/genericunix/qgenericunixthemes_p.h
+++ b/src/platformsupport/themes/genericunix/qgenericunixthemes_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -98,7 +90,7 @@ class QKdeTheme : public QPlatformTheme
 {
     Q_DECLARE_PRIVATE(QKdeTheme)
 public:
-    QKdeTheme(const QString &kdeHome, int kdeVersion);
+    QKdeTheme(const QStringList& kdeDirs, int kdeVersion);
 
     static QPlatformTheme *createKdeTheme();
     virtual QVariant themeHint(ThemeHint hint) const;
@@ -122,6 +114,8 @@ public:
     virtual const QFont *font(Font type) const;
     QString standardButtonText(int button) const Q_DECL_OVERRIDE;
 
+    virtual QString gtkFontName() const;
+
     static const char *name;
 };
 
diff --git a/src/plugins/accessible/accessible.pro b/src/plugins/accessible/accessible.pro
deleted file mode 100644
index 26c7d3066d..0000000000
--- a/src/plugins/accessible/accessible.pro
+++ /dev/null
@@ -1,5 +0,0 @@
-TEMPLATE = subdirs
-
-contains(QT_CONFIG, accessibility) {
-     SUBDIRS += widgets 
-}
diff --git a/src/plugins/accessible/widgets/widgets.json b/src/plugins/accessible/widgets/widgets.json
deleted file mode 100644
index 9ebcc89d35..0000000000
--- a/src/plugins/accessible/widgets/widgets.json
+++ /dev/null
@@ -1,54 +0,0 @@
-{
-    "Keys": [
-    "QLineEdit",
-    "QComboBox",
-    "QAbstractSpinBox",
-    "QSpinBox",
-    "QDoubleSpinBox",
-    "QScrollBar",
-    "QSlider",
-    "QAbstractSlider",
-    "QToolButton",
-    "QCheckBox",
-    "QRadioButton",
-    "QPushButton",
-    "QAbstractButton",
-    "QDialog",
-    "QMessageBox",
-    "QMainWindow",
-    "QLabel",
-    "QLCDNumber",
-    "QGroupBox",
-    "QStatusBar",
-    "QProgressBar",
-    "QPlainTextEdit",
-    "QMenuBar",
-    "QMenu",
-    "QTabBar",
-    "QToolBar",
-    "QSizeGrip",
-    "QListView",
-    "QTreeView",
-    "QTableView",
-    "QWidget",
-    "QSplitter",
-    "QSplitterHandle",
-    "QTextEdit",
-    "QTipLabel",
-    "QFrame",
-    "QStackedWidget",
-    "QToolBox",
-    "QMdiArea",
-    "QMdiSubWindow",
-    "QDialogButtonBox",
-    "QDial",
-    "QRubberBand",
-    "QTextBrowser",
-    "QAbstractScrollArea",
-    "QScrollArea",
-    "QCalendarWidget",
-    "QDockWidget",
-    "QDesktopScreenWidget",
-    "QWindowContainer"
-    ]
-}
diff --git a/src/plugins/bearer/android/android.pro b/src/plugins/bearer/android/android.pro
new file mode 100644
index 0000000000..6a51abf5d7
--- /dev/null
+++ b/src/plugins/bearer/android/android.pro
@@ -0,0 +1,4 @@
+TEMPLATE = subdirs
+
+SUBDIRS += src \
+           jar
diff --git a/src/plugins/bearer/android/jar/bundledjar.pro b/src/plugins/bearer/android/jar/bundledjar.pro
new file mode 100644
index 0000000000..6037f813f2
--- /dev/null
+++ b/src/plugins/bearer/android/jar/bundledjar.pro
@@ -0,0 +1,3 @@
+TARGET = QtAndroidBearer-bundled
+CONFIG += bundled_jar_file
+include(jar.pri)
diff --git a/src/plugins/bearer/android/jar/distributedjar.pro b/src/plugins/bearer/android/jar/distributedjar.pro
new file mode 100644
index 0000000000..c769a113d5
--- /dev/null
+++ b/src/plugins/bearer/android/jar/distributedjar.pro
@@ -0,0 +1,2 @@
+TARGET = QtAndroidBearer
+include(jar.pri)
diff --git a/src/plugins/bearer/android/jar/jar.pri b/src/plugins/bearer/android/jar/jar.pri
new file mode 100644
index 0000000000..6d9aac3bb3
--- /dev/null
+++ b/src/plugins/bearer/android/jar/jar.pri
@@ -0,0 +1,13 @@
+load(qt_build_paths)
+CONFIG += java
+DESTDIR = $$MODULE_BASE_OUTDIR/jar
+
+JAVACLASSPATH += $$PWD/src
+
+JAVASOURCES += $$PWD/src/org/qtproject/qt5/android/bearer/QtNetworkReceiver.java
+
+# install
+target.path = $$[QT_INSTALL_PREFIX]/jar
+INSTALLS += target
+
+OTHER_FILES += $$JAVASOURCES
diff --git a/src/plugins/bearer/android/jar/jar.pro b/src/plugins/bearer/android/jar/jar.pro
new file mode 100644
index 0000000000..923e757d9b
--- /dev/null
+++ b/src/plugins/bearer/android/jar/jar.pro
@@ -0,0 +1,2 @@
+TEMPLATE=subdirs
+SUBDIRS += distributedjar.pro bundledjar.pro
diff --git a/src/plugins/generic/meego/contextkitproperty.cpp b/src/plugins/bearer/android/jar/src/org/qtproject/qt5/android/bearer/QtNetworkReceiver.java
index 36d431e0cc..df0a37edc0 100644
--- a/src/plugins/generic/meego/contextkitproperty.cpp
+++ b/src/plugins/bearer/android/jar/src/org/qtproject/qt5/android/bearer/QtNetworkReceiver.java
@@ -1,6 +1,6 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
@@ -39,47 +39,57 @@
 **
 ****************************************************************************/
 
-#include "contextkitproperty.h"
+package org.qtproject.qt5.android.bearer;
 
-#include <QDBusReply>
-#include <QDebug>
+import android.content.BroadcastReceiver;
+import android.content.Context;
+import android.content.Intent;
+import android.content.IntentFilter;
+import android.util.Log;
+import android.app.Activity;
+import android.net.ConnectivityManager;
 
-static QString objectPathForProperty(const QString& property)
+public class QtNetworkReceiver
 {
-    QString path = property;
-    if (!path.startsWith(QLatin1Char('/'))) {
-        path.replace(QLatin1Char('.'), QLatin1Char('/'));
-        path.prepend(QLatin1String("/org/maemo/contextkit/"));
+    private static final String LOG_TAG = "QtNetworkReceiver";
+    private static native void activeNetworkInfoChanged();
+    private static BroadcastReceiverPrivate m_broadcastReceiver = null;
+    private static final Object m_lock = new Object();
+
+    private static class BroadcastReceiverPrivate extends BroadcastReceiver
+    {
+        @Override
+        public void onReceive(Context context, Intent intent)
+        {
+            activeNetworkInfoChanged();
+        }
     }
-    return path;
-}
 
-QContextKitProperty::QContextKitProperty(const QString& serviceName, const QString& propertyName)
-    : propertyInterface(serviceName, objectPathForProperty(propertyName),
-                        QLatin1String("org.maemo.contextkit.Property"), QDBusConnection::systemBus())
-{
-    propertyInterface.call("Subscribe");
-    connect(&propertyInterface, SIGNAL(ValueChanged(QVariantList,qulonglong)),
-            this, SLOT(cacheValue(QVariantList,qulonglong)));
+    private QtNetworkReceiver() {}
 
-    QDBusMessage reply = propertyInterface.call("Get");
-    if (reply.type() == QDBusMessage::ReplyMessage)
-        cachedValue = qdbus_cast<QList<QVariant> >(reply.arguments().value(0)).value(0);
-}
+    public static void registerReceiver(final Activity activity)
+    {
+        synchronized (m_lock) {
+            if (m_broadcastReceiver == null) {
+                m_broadcastReceiver = new BroadcastReceiverPrivate();
+                IntentFilter intentFilter = new IntentFilter(ConnectivityManager.CONNECTIVITY_ACTION);
+                activity.registerReceiver(m_broadcastReceiver, intentFilter);
+            }
+        }
+    }
 
-QContextKitProperty::~QContextKitProperty()
-{
-    propertyInterface.call("Unsubscribe");
-}
+    public static void unregisterReceiver(final Activity activity)
+    {
+        synchronized (m_lock) {
+            if (m_broadcastReceiver == null)
+                return;
 
-QVariant QContextKitProperty::value() const
-{
-    return cachedValue;
-}
+            activity.unregisterReceiver(m_broadcastReceiver);
+        }
+    }
 
-void QContextKitProperty::cacheValue(const QVariantList& values, qulonglong)
-{
-    cachedValue = values.value(0);
-    emit valueChanged(cachedValue);
+    public static ConnectivityManager getConnectivityManager(final Activity activity)
+    {
+        return (ConnectivityManager)activity.getApplicationContext().getSystemService(Context.CONNECTIVITY_SERVICE);
+    }
 }
-
diff --git a/src/plugins/bearer/android/src/android.json b/src/plugins/bearer/android/src/android.json
new file mode 100644
index 0000000000..6843bd3301
--- /dev/null
+++ b/src/plugins/bearer/android/src/android.json
@@ -0,0 +1,3 @@
+{
+    "Keys": [ "android" ]
+}
diff --git a/src/plugins/bearer/android/src/main.cpp b/src/plugins/bearer/android/src/main.cpp
new file mode 100644
index 0000000000..777d262d6b
--- /dev/null
+++ b/src/plugins/bearer/android/src/main.cpp
@@ -0,0 +1,57 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qandroidbearerengine.h"
+#include <QtNetwork/private/qbearerplugin_p.h>
+
+#ifndef QT_NO_BEARERMANAGEMENT
+
+QT_BEGIN_NAMESPACE
+
+class QAndroidBearerEnginePlugin : public QBearerEnginePlugin
+{
+    Q_OBJECT
+    Q_PLUGIN_METADATA(IID "org.qt-project.Qt.QBearerEngineFactoryInterface" FILE "android.json")
+
+public:
+    QBearerEngine *create(const QString &key) const Q_DECL_OVERRIDE
+    {
+        return (key == QStringLiteral("android")) ? new QAndroidBearerEngine() : 0;
+    }
+};
+
+QT_END_NAMESPACE
+
+#include "main.moc"
+
+#endif // QT_NO_BEARERMANAGEMENT
diff --git a/src/plugins/bearer/android/src/qandroidbearerengine.cpp b/src/plugins/bearer/android/src/qandroidbearerengine.cpp
new file mode 100644
index 0000000000..2d047ba612
--- /dev/null
+++ b/src/plugins/bearer/android/src/qandroidbearerengine.cpp
@@ -0,0 +1,397 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qandroidbearerengine.h"
+#include "../../qnetworksession_impl.h"
+#include "wrappers/androidconnectivitymanager.h"
+
+#ifndef QT_NO_BEARERMANAGEMENT
+
+QT_BEGIN_NAMESPACE
+
+static QString networkConfType(const AndroidNetworkInfo &networkInfo)
+{
+    switch (networkInfo.getType()) {
+    case AndroidNetworkInfo::Mobile:
+        return QStringLiteral("Mobile");
+    case AndroidNetworkInfo::Wifi:
+        return QStringLiteral("WiFi");
+    case AndroidNetworkInfo::Wimax:
+        return QStringLiteral("WiMax");
+    case AndroidNetworkInfo::Ethernet:
+        return QStringLiteral("Ethernet");
+    case AndroidNetworkInfo::Bluetooth:
+        return QStringLiteral("Bluetooth");
+    default:
+        break;
+    }
+
+    return QString();
+}
+
+static inline bool isMobile(QNetworkConfiguration::BearerType type)
+{
+    if (type == QNetworkConfiguration::BearerWLAN
+        || type == QNetworkConfiguration::BearerWiMAX
+        || type == QNetworkConfiguration::BearerBluetooth
+        || type == QNetworkConfiguration::BearerEthernet
+        || type == QNetworkConfiguration::BearerUnknown) {
+        return false;
+    }
+
+    return true;
+}
+
+static QNetworkConfiguration::BearerType getBearerType(const AndroidNetworkInfo &networkInfo)
+{
+    switch (networkInfo.getType()) {
+    case AndroidNetworkInfo::Mobile:
+    {
+        switch (networkInfo.getSubtype()) {
+        case AndroidNetworkInfo::Gprs:
+        case AndroidNetworkInfo::Edge:
+        case AndroidNetworkInfo::Iden:    // 2G
+            return QNetworkConfiguration::Bearer2G;
+        case AndroidNetworkInfo::Umts:    // BearerWCDMA (3 .5 .75 G)
+        case AndroidNetworkInfo::Hsdpa:   // 3G (?) UMTS
+        case AndroidNetworkInfo::Hsupa:   // 3G (?) UMTS
+            return QNetworkConfiguration::BearerWCDMA;
+        case AndroidNetworkInfo::Cdma:    // CDMA ISA95[AB]
+        case AndroidNetworkInfo::Cdma1xRTT:   // BearerCDMA2000 (3G)
+        case AndroidNetworkInfo::Ehrpd:   // CDMA Bridge thing?!?
+            return QNetworkConfiguration::BearerCDMA2000;
+        case AndroidNetworkInfo::Evdo0:   // BearerEVDO
+        case AndroidNetworkInfo::EvdoA:   // BearerEVDO
+        case AndroidNetworkInfo::EvdoB:   // BearerEVDO
+            return QNetworkConfiguration::BearerEVDO;
+        case AndroidNetworkInfo::Hspa:
+        case AndroidNetworkInfo::Hspap:   // HSPA+
+            return QNetworkConfiguration::BearerHSPA;
+        case AndroidNetworkInfo::Lte:     // BearerLTE (4G)
+            return QNetworkConfiguration::BearerLTE;
+        default:
+            break;
+        }
+    }
+    case AndroidNetworkInfo::Wifi:
+        return QNetworkConfiguration::BearerWLAN;
+    case AndroidNetworkInfo::Wimax:
+        return QNetworkConfiguration::BearerWiMAX;
+    case AndroidNetworkInfo::Bluetooth:
+    case AndroidNetworkInfo::MobileDun:
+        return QNetworkConfiguration::BearerBluetooth;
+    case AndroidNetworkInfo::Ethernet:
+        return QNetworkConfiguration::BearerEthernet;
+    case AndroidNetworkInfo::MobileMms:
+    case AndroidNetworkInfo::MobileSupl:
+    case AndroidNetworkInfo::MobileHipri:
+    case AndroidNetworkInfo::Dummy:
+    case AndroidNetworkInfo::UnknownType:
+        break;
+    }
+
+    return QNetworkConfiguration::BearerUnknown;
+}
+
+QAndroidBearerEngine::QAndroidBearerEngine(QObject *parent)
+    : QBearerEngineImpl(parent),
+      m_connectivityManager(0)
+{
+}
+
+QAndroidBearerEngine::~QAndroidBearerEngine()
+{
+}
+
+QString QAndroidBearerEngine::getInterfaceFromId(const QString &id)
+{
+    const QMutexLocker locker(&mutex);
+    return m_configurationInterface.value(id);
+}
+
+bool QAndroidBearerEngine::hasIdentifier(const QString &id)
+{
+    const QMutexLocker locker(&mutex);
+    return m_configurationInterface.contains(id);
+}
+
+void QAndroidBearerEngine::connectToId(const QString &id)
+{
+    Q_EMIT connectionError(id, OperationNotSupported);
+}
+
+void QAndroidBearerEngine::disconnectFromId(const QString &id)
+{
+    Q_EMIT connectionError(id, OperationNotSupported);
+}
+
+QNetworkSession::State QAndroidBearerEngine::sessionStateForId(const QString &id)
+{
+    const QMutexLocker locker(&mutex);
+    QNetworkConfigurationPrivatePointer ptr = accessPointConfigurations.value(id);
+
+    if ((!ptr || !ptr->isValid) || m_connectivityManager == 0)
+        return QNetworkSession::Invalid;
+
+    const QMutexLocker configLocker(&ptr->mutex);
+    // Don't re-order...
+    if ((ptr->state & QNetworkConfiguration::Active) == QNetworkConfiguration::Active) {
+        return (m_connectivityManager->isActiveNetworkMetered()
+                || m_connectivityManager->getActiveNetworkInfo().isRoaming())
+                ? QNetworkSession::Roaming
+                : QNetworkSession::Connected;
+    } else if ((ptr->state & QNetworkConfiguration::Discovered) == QNetworkConfiguration::Discovered) {
+        return QNetworkSession::Disconnected;
+    } else if ((ptr->state & QNetworkConfiguration::Defined) == QNetworkConfiguration::Defined) {
+        return QNetworkSession::NotAvailable;
+    } else if ((ptr->state & QNetworkConfiguration::Undefined) == QNetworkConfiguration::Undefined) {
+        return QNetworkSession::NotAvailable;
+    }
+
+    return QNetworkSession::Invalid;
+}
+
+QNetworkConfigurationManager::Capabilities QAndroidBearerEngine::capabilities() const
+{
+
+    return AndroidTrafficStats::isTrafficStatsSupported()
+            ? QNetworkConfigurationManager::ForcedRoaming
+              | QNetworkConfigurationManager::DataStatistics
+            : QNetworkConfigurationManager::ForcedRoaming;
+
+}
+
+QNetworkSessionPrivate *QAndroidBearerEngine::createSessionBackend()
+{
+    return new QNetworkSessionPrivateImpl();
+}
+
+QNetworkConfigurationPrivatePointer QAndroidBearerEngine::defaultConfiguration()
+{
+    return QNetworkConfigurationPrivatePointer();
+}
+
+bool QAndroidBearerEngine::requiresPolling() const
+{
+    return false;
+}
+
+quint64 QAndroidBearerEngine::bytesWritten(const QString &id)
+{
+    QMutexLocker lock(&mutex);
+    QNetworkConfigurationPrivatePointer ptr = accessPointConfigurations.value(id);
+    if (!ptr || !ptr->isValid)
+        return 0;
+
+    return isMobile(ptr->bearerType)
+            ? AndroidTrafficStats::getMobileTxBytes()
+            : AndroidTrafficStats::getTotalTxBytes() - AndroidTrafficStats::getMobileTxBytes();
+}
+
+quint64 QAndroidBearerEngine::bytesReceived(const QString &id)
+{
+    QMutexLocker lock(&mutex);
+    QNetworkConfigurationPrivatePointer ptr = accessPointConfigurations.value(id);
+    if (!ptr || !ptr->isValid)
+        return 0;
+
+    return isMobile(ptr->bearerType)
+            ? AndroidTrafficStats::getMobileRxBytes()
+            : AndroidTrafficStats::getTotalRxBytes() - AndroidTrafficStats::getMobileRxBytes();
+}
+
+quint64 QAndroidBearerEngine::startTime(const QString &id)
+{
+    Q_UNUSED(id);
+    return Q_UINT64_C(0);
+}
+
+void QAndroidBearerEngine::initialize()
+{
+    if (m_connectivityManager != 0)
+        return;
+
+    m_connectivityManager = AndroidConnectivityManager::getInstance();
+    if (m_connectivityManager == 0)
+        return;
+
+    updateConfigurations();
+
+    connect(m_connectivityManager, &AndroidConnectivityManager::activeNetworkChanged,
+            this, &QAndroidBearerEngine::updateConfigurations);
+
+}
+
+void QAndroidBearerEngine::requestUpdate()
+{
+    updateConfigurations();
+}
+
+void QAndroidBearerEngine::updateConfigurations()
+{
+#ifndef QT_NO_NETWORKINTERFACE
+    if (m_connectivityManager == 0)
+        return;
+
+    {
+        QMutexLocker locker(&mutex);
+        QStringList oldKeys = accessPointConfigurations.keys();
+
+        // Create a configuration for each of the main types (WiFi, Mobile, Bluetooth, WiMax, Ethernet)
+        foreach (const AndroidNetworkInfo &netInfo, m_connectivityManager->getAllNetworkInfo()) {
+
+            if (!netInfo.isValid())
+                continue;
+
+            const QString name = networkConfType(netInfo);
+            if (name.isEmpty())
+                continue;
+
+            QNetworkConfiguration::BearerType bearerType = getBearerType(netInfo);
+
+            QNetworkConfiguration::StateFlag state;
+            QString interfaceName;
+            if (netInfo.isAvailable()) {
+                if (netInfo.isConnected()) {
+                    state = QNetworkConfiguration::Active;
+                    // Attempt to map an interface to this configuration
+                    const QList<QNetworkInterface> &interfaces = QNetworkInterface::allInterfaces();
+                    foreach (const QNetworkInterface &interface, interfaces) {
+                        // ignore loopback interface
+                        if (!interface.isValid())
+                            continue;
+
+                        if (interface.flags() & QNetworkInterface::IsLoopBack)
+                            continue;
+                        // There is no way to get the interface from the NetworkInfo, so
+                        // look for an active interface...
+                        if (interface.flags() & QNetworkInterface::IsRunning
+                                && !interface.addressEntries().isEmpty()) {
+                            interfaceName = interface.humanReadableName();
+                            if (interfaceName.isEmpty())
+                                interfaceName = interface.name();
+                        }
+                    }
+                } else if (netInfo.isConnectedOrConnecting()) {
+                    state = QNetworkConfiguration::Undefined;
+                } else {
+                    state = QNetworkConfiguration::Discovered;
+                }
+            } else {
+                state = QNetworkConfiguration::Defined;
+            }
+
+            const uint identifier = qHash(QLatin1String("android:") + name);
+            const QString id = QString::number(identifier);
+
+            oldKeys.removeAll(id);
+            if (accessPointConfigurations.contains(id)) {
+                QNetworkConfigurationPrivatePointer ptr = accessPointConfigurations.value(id);
+                bool changed = false;
+                {
+                    const QMutexLocker confLocker(&ptr->mutex);
+
+                    if (!ptr->isValid) {
+                        ptr->isValid = true;
+                        changed = true;
+                    }
+
+                    // Don't reset the bearer type to 'Unknown'
+                    if (ptr->bearerType != QNetworkConfiguration::BearerUnknown
+                            && ptr->bearerType != bearerType) {
+                        ptr->bearerType = bearerType;
+                        changed = true;
+                    }
+
+                    if (ptr->name != name) {
+                        ptr->name = name;
+                        changed = true;
+                    }
+
+                    if (ptr->id != id) {
+                        ptr->id = id;
+                        changed = true;
+                    }
+
+                    if (ptr->state != state) {
+                        ptr->state = state;
+                        changed = true;
+                    }
+
+                    QString &oldIfName = m_configurationInterface[id];
+                    if (oldIfName != interfaceName) {
+                        oldIfName = interfaceName;
+                        changed = true;
+                    }
+                } // Unlock configuration
+
+                if (changed) {
+                    locker.unlock();
+                    Q_EMIT configurationChanged(ptr);
+                    locker.relock();
+                }
+            } else {
+                QNetworkConfigurationPrivatePointer ptr(new QNetworkConfigurationPrivate);
+                ptr->name = name;
+                ptr->isValid = true;
+                ptr->id = id;
+                ptr->state = state;
+                ptr->type = QNetworkConfiguration::InternetAccessPoint;
+                ptr->bearerType = bearerType;
+                accessPointConfigurations.insert(id, ptr);
+                m_configurationInterface.insert(id, interfaceName);
+
+                locker.unlock();
+                Q_EMIT configurationAdded(ptr);
+                locker.relock();
+            }
+        }
+
+        while (!oldKeys.isEmpty()) {
+            QNetworkConfigurationPrivatePointer ptr = accessPointConfigurations.take(oldKeys.takeFirst());
+            m_configurationInterface.remove(ptr->id);
+            locker.unlock();
+            Q_EMIT configurationRemoved(ptr);
+            locker.relock();
+        }
+
+    } // Unlock engine
+
+#endif // QT_NO_NETWORKINTERFACE
+
+    Q_EMIT updateCompleted();
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_BEARERMANAGEMENT
diff --git a/src/plugins/bearer/android/src/qandroidbearerengine.h b/src/plugins/bearer/android/src/qandroidbearerengine.h
new file mode 100644
index 0000000000..beb464bb34
--- /dev/null
+++ b/src/plugins/bearer/android/src/qandroidbearerengine.h
@@ -0,0 +1,89 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QANDROIDBEARERENGINE_H
+#define QANDROIDBEARERENGINE_H
+
+#include "../../qbearerengine_impl.h"
+
+#include <QAbstractEventDispatcher>
+#include <QAbstractNativeEventFilter>
+#include <QtCore/private/qjni_p.h>
+
+#ifndef QT_NO_BEARERMANAGEMENT
+
+QT_BEGIN_NAMESPACE
+
+class QNetworkConfigurationPrivate;
+class QNetworkSessionPrivate;
+class AndroidConnectivityManager;
+
+class QAndroidBearerEngine : public QBearerEngineImpl
+{
+    Q_OBJECT
+
+public:
+    explicit QAndroidBearerEngine(QObject *parent = 0);
+    ~QAndroidBearerEngine() Q_DECL_OVERRIDE;
+
+    QString getInterfaceFromId(const QString &id) Q_DECL_OVERRIDE;
+    bool hasIdentifier(const QString &id) Q_DECL_OVERRIDE;
+    void connectToId(const QString &id) Q_DECL_OVERRIDE;
+    void disconnectFromId(const QString &id) Q_DECL_OVERRIDE;
+    QNetworkSession::State sessionStateForId(const QString &id) Q_DECL_OVERRIDE;
+    QNetworkConfigurationManager::Capabilities capabilities() const Q_DECL_OVERRIDE;
+    QNetworkSessionPrivate *createSessionBackend() Q_DECL_OVERRIDE;
+    QNetworkConfigurationPrivatePointer defaultConfiguration() Q_DECL_OVERRIDE;
+    bool requiresPolling() const Q_DECL_OVERRIDE;
+    quint64 bytesWritten(const QString &id) Q_DECL_OVERRIDE;
+    quint64 bytesReceived(const QString &id) Q_DECL_OVERRIDE;
+    quint64 startTime(const QString &id) Q_DECL_OVERRIDE;
+
+    Q_INVOKABLE void initialize();
+    Q_INVOKABLE void requestUpdate();
+
+private Q_SLOTS:
+    void updateConfigurations();
+
+private:
+    QJNIObjectPrivate m_networkReceiver;
+    AndroidConnectivityManager *m_connectivityManager;
+    QMap<QString, QString> m_configurationInterface;
+};
+
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_BEARERMANAGEMENT
+
+#endif // QANDROIDBEARERENGINE_H
diff --git a/src/plugins/bearer/android/src/src.pro b/src/plugins/bearer/android/src/src.pro
new file mode 100644
index 0000000000..1050601896
--- /dev/null
+++ b/src/plugins/bearer/android/src/src.pro
@@ -0,0 +1,17 @@
+include(wrappers/wrappers.pri)
+
+TARGET = qandroidbearer
+
+PLUGIN_TYPE = bearer
+PLUGIN_CLASS_NAME = QAndroidBearerEnginePlugin
+load(qt_plugin)
+
+QT = core-private network-private
+
+HEADERS += qandroidbearerengine.h \
+           ../../qnetworksession_impl.h \
+           ../../qbearerengine_impl.h
+
+SOURCES += main.cpp \
+           qandroidbearerengine.cpp \
+           ../../qnetworksession_impl.cpp
diff --git a/src/plugins/bearer/android/src/wrappers/androidconnectivitymanager.cpp b/src/plugins/bearer/android/src/wrappers/androidconnectivitymanager.cpp
new file mode 100644
index 0000000000..4beb2e581b
--- /dev/null
+++ b/src/plugins/bearer/android/src/wrappers/androidconnectivitymanager.cpp
@@ -0,0 +1,386 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "androidconnectivitymanager.h"
+#include <QtCore/private/qjni_p.h>
+#include <QtCore/private/qjnihelpers_p.h>
+
+QT_BEGIN_NAMESPACE
+
+static inline bool exceptionCheckAndClear(JNIEnv *env)
+{
+    if (!env->ExceptionCheck())
+        return false;
+
+#ifdef QT_DEBUG
+    env->ExceptionDescribe();
+#endif // QT_DEBUG
+    env->ExceptionClear();
+
+    return true;
+}
+
+struct AndroidConnectivityManagerInstance
+{
+    AndroidConnectivityManagerInstance()
+        : connManager(new AndroidConnectivityManager)
+    {    }
+    ~AndroidConnectivityManagerInstance()
+    {
+        delete connManager;
+    }
+
+    AndroidConnectivityManager* connManager;
+};
+
+Q_GLOBAL_STATIC(AndroidConnectivityManagerInstance, androidConnManagerInstance)
+
+static const char networkReceiverClass[] = "org/qtproject/qt5/android/bearer/QtNetworkReceiver";
+static const char trafficStatsClass[] = "android/net/TrafficStats";
+
+/**
+ * Returns the number of bytes transmitted over the mobile network since last device boot.
+ */
+qint64 AndroidTrafficStats::getMobileTxBytes()
+{
+    return QJNIObjectPrivate::callStaticMethod<jlong>(trafficStatsClass,
+                                                      "getMobileTxBytes",
+                                                      "()J");
+}
+
+/**
+ * Returns the number of bytes received over the mobile network since last device boot.
+ */
+qint64 AndroidTrafficStats::getMobileRxBytes()
+{
+    return QJNIObjectPrivate::callStaticMethod<jlong>(trafficStatsClass,
+                                                      "getMobileRxBytes",
+                                                      "()J");
+}
+
+/**
+ * Returns the total transmitted bytes since last device boot.
+ */
+qint64 AndroidTrafficStats::getTotalTxBytes()
+{
+    return QJNIObjectPrivate::callStaticMethod<jlong>(trafficStatsClass,
+                                                      "getTotalTxBytes",
+                                                      "()J");
+}
+
+/**
+ * Returns the total received bytes since last device boot.
+ */
+qint64 AndroidTrafficStats::getTotalRxBytes()
+{
+    return QJNIObjectPrivate::callStaticMethod<jlong>(trafficStatsClass,
+                                                      "getTotalRxBytes",
+                                                      "()J");
+}
+
+bool AndroidTrafficStats::isTrafficStatsSupported()
+{
+    // Before API level 18 DataStatistics might not be supported, so make sure that we get something
+    // else then -1 from from getXXBytes().
+    return (AndroidTrafficStats::getMobileRxBytes() != -1
+            && AndroidTrafficStats::getTotalRxBytes() != -1);
+}
+
+static AndroidNetworkInfo::NetworkState stateForName(const QString stateName)
+{
+    if (stateName == QLatin1String("CONNECTED"))
+        return AndroidNetworkInfo::Connected;
+    else if (stateName == QLatin1String("CONNECTING"))
+        return AndroidNetworkInfo::Connecting;
+    else if (stateName == QLatin1String("DISCONNECTED"))
+        return AndroidNetworkInfo::Disconnected;
+    else if (stateName == QLatin1String("DISCONNECTING"))
+        return AndroidNetworkInfo::Disconnecting;
+    else if (stateName == QLatin1String("SUSPENDED"))
+        return AndroidNetworkInfo::Suspended;
+
+    return AndroidNetworkInfo::UnknownState;
+}
+
+AndroidNetworkInfo::NetworkState AndroidNetworkInfo::getDetailedState() const
+{
+    QJNIObjectPrivate enumObject = m_networkInfo.callObjectMethod("getDetailedState",
+                                                                  "()Landroid/net/NetworkInfo$DetailedState;");
+    if (!enumObject.isValid())
+        return UnknownState;
+
+    QJNIObjectPrivate enumName = enumObject.callObjectMethod<jstring>("name");
+    if (!enumName.isValid())
+        return UnknownState;
+
+    return stateForName(enumName.toString());
+}
+
+QString AndroidNetworkInfo::getExtraInfo() const
+{
+    QJNIObjectPrivate extraInfo = m_networkInfo.callObjectMethod<jstring>("getExtraInfo");
+    if (!extraInfo.isValid())
+        return QString();
+
+    return extraInfo.toString();
+}
+
+QString AndroidNetworkInfo::getReason() const
+{
+    QJNIObjectPrivate reason = m_networkInfo.callObjectMethod<jstring>("getReason");
+    if (!reason.isValid())
+        return QString();
+
+    return reason.toString();
+}
+
+AndroidNetworkInfo::NetworkState AndroidNetworkInfo::getState() const
+{
+    QJNIObjectPrivate enumObject = m_networkInfo.callObjectMethod("getState",
+                                                                  "()Landroid/net/NetworkInfo$State;");
+    if (!enumObject.isValid())
+        return UnknownState;
+
+    QJNIObjectPrivate enumName = enumObject.callObjectMethod<jstring>("name");
+    if (!enumName.isValid())
+        return UnknownState;
+
+    return stateForName(enumName.toString());
+}
+
+AndroidNetworkInfo::NetworkSubType AndroidNetworkInfo::getSubtype() const
+{
+    return AndroidNetworkInfo::NetworkSubType(m_networkInfo.callMethod<jint>("getSubtype"));
+}
+
+QString AndroidNetworkInfo::getSubtypeName() const
+{
+    QJNIObjectPrivate subtypeName = m_networkInfo.callObjectMethod<jstring>("getSubtypeName");
+    if (!subtypeName.isValid())
+        return QString();
+
+    return subtypeName.toString();
+}
+
+AndroidNetworkInfo::NetworkType AndroidNetworkInfo::getType() const
+{
+    return AndroidNetworkInfo::NetworkType(m_networkInfo.callMethod<jint>("getType"));
+}
+
+QString AndroidNetworkInfo::getTypeName() const
+{
+    QJNIObjectPrivate typeName = m_networkInfo.callObjectMethod<jstring>("getTypeName");
+    if (!typeName.isValid())
+        return QString();
+
+    return typeName.toString();
+}
+
+bool AndroidNetworkInfo::isAvailable() const
+{
+    return m_networkInfo.callMethod<jboolean>("isAvailable");
+}
+
+bool AndroidNetworkInfo::isConnected() const
+{
+    return m_networkInfo.callMethod<jboolean>("isConnected");
+}
+
+bool AndroidNetworkInfo::isConnectedOrConnecting() const
+{
+    return m_networkInfo.callMethod<jboolean>("isConnectedOrConnecting");
+}
+
+bool AndroidNetworkInfo::isFailover() const
+{
+    return m_networkInfo.callMethod<jboolean>("isFailover");
+}
+
+bool AndroidNetworkInfo::isRoaming() const
+{
+    return m_networkInfo.callMethod<jboolean>("isRoaming");
+}
+
+bool AndroidNetworkInfo::isValid() const
+{
+    return m_networkInfo.isValid();
+}
+
+AndroidConnectivityManager::AndroidConnectivityManager()
+{
+    QJNIEnvironmentPrivate env;
+    if (!registerNatives(env))
+        return;
+
+    m_connectivityManager = QJNIObjectPrivate::callStaticObjectMethod(networkReceiverClass,
+                                                                      "getConnectivityManager",
+                                                                      "(Landroid/app/Activity;)Landroid/net/ConnectivityManager;",
+                                                                      QtAndroidPrivate::activity());
+    if (!m_connectivityManager.isValid())
+        return;
+
+    QJNIObjectPrivate::callStaticMethod<void>(networkReceiverClass,
+                                              "registerReceiver",
+                                              "(Landroid/app/Activity;)V",
+                                              QtAndroidPrivate::activity());
+}
+
+AndroidConnectivityManager *AndroidConnectivityManager::getInstance()
+{
+    return androidConnManagerInstance->connManager->isValid()
+            ? androidConnManagerInstance->connManager
+            : 0;
+}
+
+AndroidConnectivityManager::~AndroidConnectivityManager()
+{
+    QJNIObjectPrivate::callStaticMethod<void>(networkReceiverClass,
+                                              "unregisterReceiver",
+                                              "(Landroid/app/Activity;)V",
+                                              QtAndroidPrivate::activity());
+}
+
+AndroidNetworkInfo AndroidConnectivityManager::getActiveNetworkInfo() const
+{
+    QJNIObjectPrivate networkInfo = m_connectivityManager.callObjectMethod("getActiveNetworkInfo",
+                                                                           "()Landroid/net/NetworkInfo;");
+    return networkInfo;
+}
+
+QList<AndroidNetworkInfo> AndroidConnectivityManager::getAllNetworkInfo() const
+{
+    QJNIEnvironmentPrivate env;
+    QJNIObjectPrivate objArray = m_connectivityManager.callObjectMethod("getAllNetworkInfo",
+                                                                        "()[Landroid/net/NetworkInfo;");
+    QList<AndroidNetworkInfo> list;
+    if (!objArray.isValid())
+        return list;
+
+    const jsize length = env->GetArrayLength(static_cast<jarray>(objArray.object()));
+    if (exceptionCheckAndClear(env))
+        return list;
+
+    for (int i = 0; i != length; ++i) {
+        jobject lref = env->GetObjectArrayElement(static_cast<jobjectArray>(objArray.object()), i);
+        if (exceptionCheckAndClear(env))
+            break;
+
+        list << AndroidNetworkInfo(lref);
+        env->DeleteLocalRef(lref);
+    }
+
+    return list;
+}
+
+bool AndroidConnectivityManager::getBackgroundDataSetting() const
+{
+    return m_connectivityManager.callMethod<jboolean>("getBackgroundDataSetting");
+}
+
+AndroidNetworkInfo AndroidConnectivityManager::getNetworkInfo(int networkType) const
+{
+    QJNIObjectPrivate networkInfo = m_connectivityManager.callObjectMethod("getNetworkInfo",
+                                                                           "(I)Landroid/net/NetworkInfo;",
+                                                                           networkType);
+    return networkInfo;
+}
+
+int AndroidConnectivityManager::getNetworkPreference() const
+{
+    return m_connectivityManager.callMethod<jint>("getNetworkPreference");
+}
+
+bool AndroidConnectivityManager::isActiveNetworkMetered() const
+{
+    // This function was added in JB
+    if (QtAndroidPrivate::androidSdkVersion() < 16)
+        return false;
+
+    return m_connectivityManager.callMethod<jboolean>("isActiveNetworkMetered");
+}
+
+bool AndroidConnectivityManager::isNetworkTypeValid(int networkType)
+{
+    return QJNIObjectPrivate::callStaticMethod<jboolean>("android/net/ConnectivityManager",
+                                                         "isNetworkTypeValid",
+                                                         "(I)Z",
+                                                         networkType);
+}
+
+bool AndroidConnectivityManager::requestRouteToHost(int networkType, int hostAddress)
+{
+    return m_connectivityManager.callMethod<jboolean>("requestRouteToHost", "(II)Z", networkType, hostAddress);
+}
+
+void AndroidConnectivityManager::setNetworkPreference(int preference)
+{
+    m_connectivityManager.callMethod<void>("setNetworkPreference", "(I)V", preference);
+}
+
+int AndroidConnectivityManager::startUsingNetworkFeature(int networkType, const QString &feature)
+{
+    QJNIObjectPrivate jfeature = QJNIObjectPrivate::fromString(feature);
+    return m_connectivityManager.callMethod<jint>("startUsingNetworkFeature",
+                                                  "(ILjava/lang/String;)I",
+                                                  networkType,
+                                                  jfeature.object());
+}
+
+int AndroidConnectivityManager::stopUsingNetworkFeature(int networkType, const QString &feature)
+{
+    QJNIObjectPrivate jfeature = QJNIObjectPrivate::fromString(feature);
+    return m_connectivityManager.callMethod<jint>("stopUsingNetworkFeature",
+                                                  "(ILjava/lang/String;)I",
+                                                  networkType,
+                                                  jfeature.object());
+}
+
+static void activeNetworkInfoChanged()
+{
+    Q_EMIT androidConnManagerInstance->connManager->activeNetworkChanged();
+}
+
+bool AndroidConnectivityManager::registerNatives(JNIEnv *env)
+{
+    QJNIObjectPrivate networkReceiver(networkReceiverClass);
+    if (!networkReceiver.isValid())
+        return false;
+
+    jclass clazz = env->GetObjectClass(networkReceiver.object());
+    static JNINativeMethod method = {"activeNetworkInfoChanged", "()V", reinterpret_cast<void *>(activeNetworkInfoChanged)};
+    const bool ret = (env->RegisterNatives(clazz, &method, 1) == JNI_OK);
+    env->DeleteLocalRef(clazz);
+    return ret;
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/bearer/android/src/wrappers/androidconnectivitymanager.h b/src/plugins/bearer/android/src/wrappers/androidconnectivitymanager.h
new file mode 100644
index 0000000000..230d039934
--- /dev/null
+++ b/src/plugins/bearer/android/src/wrappers/androidconnectivitymanager.h
@@ -0,0 +1,162 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef ANDROIDCONNECTIVITYMANAGER_H
+#define ANDROIDCONNECTIVITYMANAGER_H
+
+#include <QObject>
+#include <QtCore/private/qjni_p.h>
+
+QT_BEGIN_NAMESPACE
+
+class AndroidTrafficStats
+{
+public:
+    static qint64 getMobileTxBytes();
+    static qint64 getMobileRxBytes();
+    static qint64 getTotalTxBytes();
+    static qint64 getTotalRxBytes();
+    static bool isTrafficStatsSupported();
+};
+
+class AndroidNetworkInfo
+{
+public:
+    // Needs to be in sync with the values from the android api.
+    enum NetworkState {
+        UnknownState,
+        Authenticating,
+        Blocked,
+        CaptivePortalCheck,
+        Connected,
+        Connecting,
+        Disconnected,
+        Disconnecting,
+        Failed,
+        Idle,
+        ObtainingIpAddr,
+        Scanning,
+        Suspended,
+        VerifyingPoorLink
+    };
+
+    enum NetworkType {
+        Mobile,
+        Wifi,
+        MobileMms,
+        MobileSupl,
+        MobileDun,
+        MobileHipri,
+        Wimax,
+        Bluetooth,
+        Dummy,
+        Ethernet,
+        UnknownType
+    };
+
+    enum NetworkSubType {
+        UnknownSubType,
+        Gprs,
+        Edge,
+        Umts,
+        Cdma,
+        Evdo0,
+        EvdoA,
+        Cdma1xRTT,
+        Hsdpa,
+        Hsupa,
+        Hspa,
+        Iden,
+        EvdoB,
+        Lte,
+        Ehrpd,
+        Hspap
+    };
+
+    inline AndroidNetworkInfo(const QJNIObjectPrivate &obj) : m_networkInfo(obj)
+    { }
+
+    NetworkState getDetailedState() const;
+    QString getExtraInfo() const;
+    QString getReason() const;
+    NetworkState getState() const;
+    NetworkSubType getSubtype() const;
+    QString getSubtypeName() const;
+    NetworkType getType() const;
+    QString getTypeName() const;
+    bool isAvailable() const;
+    bool isConnected() const;
+    bool isConnectedOrConnecting() const;
+    bool isFailover() const;
+    bool isRoaming() const;
+    bool isValid() const;
+
+private:
+    QJNIObjectPrivate m_networkInfo;
+};
+
+class AndroidConnectivityManager : public QObject
+{
+    Q_OBJECT
+public:
+    static AndroidConnectivityManager *getInstance();
+    ~AndroidConnectivityManager();
+
+    AndroidNetworkInfo getActiveNetworkInfo() const;
+    QList<AndroidNetworkInfo> getAllNetworkInfo() const;
+    bool getBackgroundDataSetting() const;
+    AndroidNetworkInfo getNetworkInfo(int networkType) const;
+    int getNetworkPreference() const;
+    bool isActiveNetworkMetered() const;
+    static bool isNetworkTypeValid(int networkType);
+    bool requestRouteToHost(int networkType, int hostAddress);
+    void setNetworkPreference(int preference);
+    int startUsingNetworkFeature(int networkType, const QString &feature);
+    int stopUsingNetworkFeature(int networkType, const QString &feature);
+    inline bool isValid() const
+    {
+        return m_connectivityManager.isValid();
+    }
+
+    Q_SIGNAL void activeNetworkChanged();
+
+private:
+    friend struct AndroidConnectivityManagerInstance;
+    AndroidConnectivityManager();
+    bool registerNatives(JNIEnv *env);
+    QJNIObjectPrivate m_connectivityManager;
+};
+
+QT_END_NAMESPACE
+
+#endif // ANDROIDCONNECTIVITYMANAGER_H
diff --git a/src/plugins/bearer/android/src/wrappers/wrappers.pri b/src/plugins/bearer/android/src/wrappers/wrappers.pri
new file mode 100644
index 0000000000..209b76e533
--- /dev/null
+++ b/src/plugins/bearer/android/src/wrappers/wrappers.pri
@@ -0,0 +1,6 @@
+INCLUDEPATH += $$PWD
+
+HEADERS += \
+           $$PWD/androidconnectivitymanager.h
+SOURCES += \
+           $$PWD/androidconnectivitymanager.cpp
diff --git a/src/plugins/bearer/bearer.pro b/src/plugins/bearer/bearer.pro
index 42f039b19b..e52df24857 100644
--- a/src/plugins/bearer/bearer.pro
+++ b/src/plugins/bearer/bearer.pro
@@ -11,5 +11,6 @@ blackberry:SUBDIRS += blackberry
 win32:!wince*:SUBDIRS += nativewifi
 mac:contains(QT_CONFIG, corewlan):SUBDIRS += corewlan
 mac:SUBDIRS += generic
+android:!android-no-sdk:SUBDIRS += android
 
 isEmpty(SUBDIRS):SUBDIRS = generic
diff --git a/src/plugins/bearer/blackberry/main.cpp b/src/plugins/bearer/blackberry/main.cpp
index 95e4234009..a8177ff192 100644
--- a/src/plugins/bearer/blackberry/main.cpp
+++ b/src/plugins/bearer/blackberry/main.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/blackberry/qbbengine.cpp b/src/plugins/bearer/blackberry/qbbengine.cpp
index 37093a09ec..694d66ca43 100644
--- a/src/plugins/bearer/blackberry/qbbengine.cpp
+++ b/src/plugins/bearer/blackberry/qbbengine.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/blackberry/qbbengine.h b/src/plugins/bearer/blackberry/qbbengine.h
index fb5ec42650..e94f55d933 100644
--- a/src/plugins/bearer/blackberry/qbbengine.h
+++ b/src/plugins/bearer/blackberry/qbbengine.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/connman/main.cpp b/src/plugins/bearer/connman/main.cpp
index af73a6b930..40252eb711 100644
--- a/src/plugins/bearer/connman/main.cpp
+++ b/src/plugins/bearer/connman/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/connman/qconnmanengine.cpp b/src/plugins/bearer/connman/qconnmanengine.cpp
index ee219f00ac..bbff154ff5 100644
--- a/src/plugins/bearer/connman/qconnmanengine.cpp
+++ b/src/plugins/bearer/connman/qconnmanengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -168,10 +160,19 @@ void QConnmanEngine::connectToId(const QString &id)
 
     QConnmanServiceInterface *serv = connmanServiceInterfaces.value(id);
 
-    if (!serv->isValid()) {
+    if (!serv || !serv->isValid()) {
         emit connectionError(id, QBearerEngineImpl::InterfaceLookupError);
     } else {
-        serv->connect();
+        if (serv->type() == QLatin1String("cellular")) {
+            if (serv->roaming()) {
+                if (!isRoamingAllowed(serv->path())) {
+                    emit connectionError(id, QBearerEngineImpl::OperationNotSupported);
+                    return;
+                }
+            }
+        }
+        if (serv->autoConnect())
+            serv->connect();
     }
 }
 
@@ -180,7 +181,7 @@ void QConnmanEngine::disconnectFromId(const QString &id)
     QMutexLocker locker(&mutex);
     QConnmanServiceInterface *serv = connmanServiceInterfaces.value(id);
 
-    if (!serv->isValid()) {
+    if (!serv || !serv->isValid()) {
         emit connectionError(id, DisconnectionError);
     } else {
         serv->disconnect();
@@ -232,6 +233,8 @@ QNetworkSession::State QConnmanEngine::sessionStateForId(const QString &id)
 
     QString service = id;
     QConnmanServiceInterface *serv = connmanServiceInterfaces.value(service);
+    if (!serv)
+        return QNetworkSession::Invalid;
 
     QString servState = serv->state();
 
@@ -336,6 +339,8 @@ void QConnmanEngine::serviceStateChanged(const QString &state)
 
 void QConnmanEngine::configurationChange(QConnmanServiceInterface *serv)
 {
+    if (!serv)
+        return;
     QMutexLocker locker(&mutex);
     QString id = serv->path();
 
@@ -377,8 +382,10 @@ QNetworkConfiguration::StateFlags QConnmanEngine::getStateForService(const QStri
 {
     QMutexLocker locker(&mutex);
     QConnmanServiceInterface *serv = connmanServiceInterfaces.value(service);
-    QString state = serv->state();
+    if (!serv)
+        return QNetworkConfiguration::Undefined;
 
+    QString state = serv->state();
     QNetworkConfiguration::StateFlags flag = QNetworkConfiguration::Defined;
 
     if (serv->type() == QLatin1String("cellular")) {
@@ -474,7 +481,7 @@ void QConnmanEngine::addServiceConfiguration(const QString &servicePath)
 {
     QMutexLocker locker(&mutex);
     if (!connmanServiceInterfaces.contains(servicePath)) {
-        QConnmanServiceInterface *serv = new QConnmanServiceInterface(servicePath);
+        QConnmanServiceInterface *serv = new QConnmanServiceInterface(servicePath, this);
         connmanServiceInterfaces.insert(serv->path(),serv);
     }
 
diff --git a/src/plugins/bearer/connman/qconnmanengine.h b/src/plugins/bearer/connman/qconnmanengine.h
index 4d5495ae86..52e8b384a0 100644
--- a/src/plugins/bearer/connman/qconnmanengine.h
+++ b/src/plugins/bearer/connman/qconnmanengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/connman/qconnmanservice_linux.cpp b/src/plugins/bearer/connman/qconnmanservice_linux.cpp
index 46b24f77dd..23860077d7 100644
--- a/src/plugins/bearer/connman/qconnmanservice_linux.cpp
+++ b/src/plugins/bearer/connman/qconnmanservice_linux.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/connman/qconnmanservice_linux_p.h b/src/plugins/bearer/connman/qconnmanservice_linux_p.h
index 250f90e2d0..014c8cf459 100644
--- a/src/plugins/bearer/connman/qconnmanservice_linux_p.h
+++ b/src/plugins/bearer/connman/qconnmanservice_linux_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/connman/qofonoservice_linux.cpp b/src/plugins/bearer/connman/qofonoservice_linux.cpp
index f5da52a341..ecf79101f0 100644
--- a/src/plugins/bearer/connman/qofonoservice_linux.cpp
+++ b/src/plugins/bearer/connman/qofonoservice_linux.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/connman/qofonoservice_linux_p.h b/src/plugins/bearer/connman/qofonoservice_linux_p.h
index 8fea465fd0..8a6a932e0d 100644
--- a/src/plugins/bearer/connman/qofonoservice_linux_p.h
+++ b/src/plugins/bearer/connman/qofonoservice_linux_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/corewlan/main.cpp b/src/plugins/bearer/corewlan/main.cpp
index fe35628711..91246d09fc 100644
--- a/src/plugins/bearer/corewlan/main.cpp
+++ b/src/plugins/bearer/corewlan/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/corewlan/qcorewlanengine.h b/src/plugins/bearer/corewlan/qcorewlanengine.h
index 3058ad599a..930bde40b3 100644
--- a/src/plugins/bearer/corewlan/qcorewlanengine.h
+++ b/src/plugins/bearer/corewlan/qcorewlanengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/generic/main.cpp b/src/plugins/bearer/generic/main.cpp
index eeeb2051af..e825cd494b 100644
--- a/src/plugins/bearer/generic/main.cpp
+++ b/src/plugins/bearer/generic/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/generic/qgenericengine.cpp b/src/plugins/bearer/generic/qgenericengine.cpp
index d687539d84..3b1085569d 100644
--- a/src/plugins/bearer/generic/qgenericengine.cpp
+++ b/src/plugins/bearer/generic/qgenericengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/generic/qgenericengine.h b/src/plugins/bearer/generic/qgenericengine.h
index 61900089bd..f688cae3d0 100644
--- a/src/plugins/bearer/generic/qgenericengine.h
+++ b/src/plugins/bearer/generic/qgenericengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nativewifi/main.cpp b/src/plugins/bearer/nativewifi/main.cpp
index f00419ee83..9b5fd75bb0 100644
--- a/src/plugins/bearer/nativewifi/main.cpp
+++ b/src/plugins/bearer/nativewifi/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nativewifi/platformdefs.h b/src/plugins/bearer/nativewifi/platformdefs.h
index 4e0f6d5a73..0d95278af8 100644
--- a/src/plugins/bearer/nativewifi/platformdefs.h
+++ b/src/plugins/bearer/nativewifi/platformdefs.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nativewifi/qnativewifiengine.cpp b/src/plugins/bearer/nativewifi/qnativewifiengine.cpp
index d6f5f8b1fc..6578d9491a 100644
--- a/src/plugins/bearer/nativewifi/qnativewifiengine.cpp
+++ b/src/plugins/bearer/nativewifi/qnativewifiengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nativewifi/qnativewifiengine.h b/src/plugins/bearer/nativewifi/qnativewifiengine.h
index ea7288d536..ad9657ed52 100644
--- a/src/plugins/bearer/nativewifi/qnativewifiengine.h
+++ b/src/plugins/bearer/nativewifi/qnativewifiengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/main.cpp b/src/plugins/bearer/networkmanager/main.cpp
index d816345bae..f416bb42a6 100644
--- a/src/plugins/bearer/networkmanager/main.cpp
+++ b/src/plugins/bearer/networkmanager/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/qnetworkmanagerengine.cpp b/src/plugins/bearer/networkmanager/qnetworkmanagerengine.cpp
index 381bdd6867..08a0bb4c63 100644
--- a/src/plugins/bearer/networkmanager/qnetworkmanagerengine.cpp
+++ b/src/plugins/bearer/networkmanager/qnetworkmanagerengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/qnetworkmanagerengine.h b/src/plugins/bearer/networkmanager/qnetworkmanagerengine.h
index 13610e4d90..19a569d01e 100644
--- a/src/plugins/bearer/networkmanager/qnetworkmanagerengine.h
+++ b/src/plugins/bearer/networkmanager/qnetworkmanagerengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/qnetworkmanagerservice.cpp b/src/plugins/bearer/networkmanager/qnetworkmanagerservice.cpp
index c28f7ef664..d249d85c4d 100644
--- a/src/plugins/bearer/networkmanager/qnetworkmanagerservice.cpp
+++ b/src/plugins/bearer/networkmanager/qnetworkmanagerservice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/qnetworkmanagerservice.h b/src/plugins/bearer/networkmanager/qnetworkmanagerservice.h
index 9493218024..6b15642386 100644
--- a/src/plugins/bearer/networkmanager/qnetworkmanagerservice.h
+++ b/src/plugins/bearer/networkmanager/qnetworkmanagerservice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/qnmdbushelper.cpp b/src/plugins/bearer/networkmanager/qnmdbushelper.cpp
index e2fab0cd61..a2e055d784 100644
--- a/src/plugins/bearer/networkmanager/qnmdbushelper.cpp
+++ b/src/plugins/bearer/networkmanager/qnmdbushelper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/networkmanager/qnmdbushelper.h b/src/plugins/bearer/networkmanager/qnmdbushelper.h
index 08920f735d..cd5e8a3494 100644
--- a/src/plugins/bearer/networkmanager/qnmdbushelper.h
+++ b/src/plugins/bearer/networkmanager/qnmdbushelper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nla/main.cpp b/src/plugins/bearer/nla/main.cpp
index 4611854b95..911dd8b21a 100644
--- a/src/plugins/bearer/nla/main.cpp
+++ b/src/plugins/bearer/nla/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nla/qnlaengine.cpp b/src/plugins/bearer/nla/qnlaengine.cpp
index 35630fc047..cd2af56f5d 100644
--- a/src/plugins/bearer/nla/qnlaengine.cpp
+++ b/src/plugins/bearer/nla/qnlaengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/nla/qnlaengine.h b/src/plugins/bearer/nla/qnlaengine.h
index d8db895381..0427f8492d 100644
--- a/src/plugins/bearer/nla/qnlaengine.h
+++ b/src/plugins/bearer/nla/qnlaengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/platformdefs_win.h b/src/plugins/bearer/platformdefs_win.h
index ace79c8485..ad30dcbb73 100644
--- a/src/plugins/bearer/platformdefs_win.h
+++ b/src/plugins/bearer/platformdefs_win.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/qbearerengine_impl.h b/src/plugins/bearer/qbearerengine_impl.h
index 5fa3f16773..ee31f08e40 100644
--- a/src/plugins/bearer/qbearerengine_impl.h
+++ b/src/plugins/bearer/qbearerengine_impl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/qnetworksession_impl.cpp b/src/plugins/bearer/qnetworksession_impl.cpp
index 3bfd64d6b0..1db59fec94 100644
--- a/src/plugins/bearer/qnetworksession_impl.cpp
+++ b/src/plugins/bearer/qnetworksession_impl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/bearer/qnetworksession_impl.h b/src/plugins/bearer/qnetworksession_impl.h
index 23828c885c..f5c9ab393f 100644
--- a/src/plugins/bearer/qnetworksession_impl.h
+++ b/src/plugins/bearer/qnetworksession_impl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/evdevkeyboard/main.cpp b/src/plugins/generic/evdevkeyboard/main.cpp
index f2abb9f18c..c913aff787 100644
--- a/src/plugins/generic/evdevkeyboard/main.cpp
+++ b/src/plugins/generic/evdevkeyboard/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/evdevmouse/main.cpp b/src/plugins/generic/evdevmouse/main.cpp
index 78f91f6d71..b460502c9c 100644
--- a/src/plugins/generic/evdevmouse/main.cpp
+++ b/src/plugins/generic/evdevmouse/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/evdevtablet/main.cpp b/src/plugins/generic/evdevtablet/main.cpp
index 898df9ce17..b3a73de4f7 100644
--- a/src/plugins/generic/evdevtablet/main.cpp
+++ b/src/plugins/generic/evdevtablet/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/evdevtouch/main.cpp b/src/plugins/generic/evdevtouch/main.cpp
index ac9c36342a..1c6d0fba0d 100644
--- a/src/plugins/generic/evdevtouch/main.cpp
+++ b/src/plugins/generic/evdevtouch/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/generic.pro b/src/plugins/generic/generic.pro
index 18a8295d3c..767b9a55c1 100644
--- a/src/plugins/generic/generic.pro
+++ b/src/plugins/generic/generic.pro
@@ -1,7 +1,5 @@
 TEMPLATE = subdirs
 
-*-maemo*: SUBDIRS += meego
-
 contains(QT_CONFIG, evdev) {
     SUBDIRS += evdevmouse evdevtouch evdevkeyboard evdevtablet
 }
diff --git a/src/plugins/generic/meego/contextkitproperty.h b/src/plugins/generic/meego/contextkitproperty.h
deleted file mode 100644
index 4c7c64d4e5..0000000000
--- a/src/plugins/generic/meego/contextkitproperty.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-#ifndef CONTEXTKITPROPERTY_H
-#define CONTEXTKITPROPERTY_H
-
-#include <QDBusInterface>
-
-class QContextKitProperty : public QObject
-{
-    Q_OBJECT
-public:
-    QContextKitProperty(const QString& serviceName, const QString& propertyName);
-    ~QContextKitProperty();
-
-    QVariant value() const;
-
-signals:
-    void valueChanged(const QVariant& value);
-
-private slots:
-    void cacheValue(const QVariantList& values, qulonglong);
-
-private:
-    QDBusInterface propertyInterface;
-    QVariant cachedValue;
-};
-
-#endif // CONTEXTKITPROPERTY_H
diff --git a/src/plugins/generic/meego/main.cpp b/src/plugins/generic/meego/main.cpp
deleted file mode 100644
index 0e39b31a2a..0000000000
--- a/src/plugins/generic/meego/main.cpp
+++ /dev/null
@@ -1,68 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QtGui/qgenericplugin.h>
-#include "qmeegointegration.h"
-
-QT_BEGIN_NAMESPACE
-
-class QMeeGoIntegrationPlugin : public QGenericPlugin
-{
-    Q_PLUGIN_METADATA(IID "org.qt-project.Qt.QGenericPluginFactoryInterface" FILE "meego.json")
-public:
-    QMeeGoIntegrationPlugin();
-
-    QObject* create(const QString &key, const QString &specification);
-};
-
-QMeeGoIntegrationPlugin::QMeeGoIntegrationPlugin()
-    : QGenericPlugin()
-{
-}
-
-QObject* QMeeGoIntegrationPlugin::create(const QString &key, const QString &specification)
-{
-    if (!key.compare(QLatin1String("MeeGoIntegration"), Qt::CaseInsensitive))
-        return new QMeeGoIntegration();
-    return 0;
-}
-
-QT_END_NAMESPACE
diff --git a/src/plugins/generic/meego/meego.json b/src/plugins/generic/meego/meego.json
deleted file mode 100644
index b475b67f25..0000000000
--- a/src/plugins/generic/meego/meego.json
+++ /dev/null
@@ -1,3 +0,0 @@
-{
-    "Keys": [ "MeeGoIntegration" ]
-}
diff --git a/src/plugins/generic/meego/meego.pro b/src/plugins/generic/meego/meego.pro
deleted file mode 100644
index 4baaa43a4c..0000000000
--- a/src/plugins/generic/meego/meego.pro
+++ /dev/null
@@ -1,14 +0,0 @@
-TARGET = qmeegointegration
-
-PLUGIN_TYPE = generic
-PLUGIN_EXTENDS = -
-PLUGIN_CLASS_NAME = QMeeGoIntegrationPlugin
-load(qt_plugin)
-
-SOURCES = qmeegointegration.cpp \
-          main.cpp \
-          contextkitproperty.cpp
-HEADERS = qmeegointegration.h \
-          contextkitproperty.h
-
-QT = core-private gui-private dbus gui-private
diff --git a/src/plugins/generic/meego/qmeegointegration.cpp b/src/plugins/generic/meego/qmeegointegration.cpp
deleted file mode 100644
index 97206d47d3..0000000000
--- a/src/plugins/generic/meego/qmeegointegration.cpp
+++ /dev/null
@@ -1,81 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qmeegointegration.h"
-
-#include <QDebug>
-#include <QDBusConnection>
-#include <QDBusArgument>
-#include <qguiapplication.h>
-#include <qpa/qwindowsysteminterface.h>
-
-QMeeGoIntegration::QMeeGoIntegration()
-    : screenTopEdge(QStringLiteral("com.nokia.SensorService"), QStringLiteral("Screen.TopEdge"))
-{
-    connect(&screenTopEdge, SIGNAL(valueChanged(QVariant)),
-            this, SLOT(updateScreenOrientation(QVariant)));
-    updateScreenOrientation(screenTopEdge.value());
-}
-
-QMeeGoIntegration::~QMeeGoIntegration()
-{
-}
-
-void QMeeGoIntegration::updateScreenOrientation(const QVariant& topEdgeValue)
-{
-    QString edge = topEdgeValue.toString();
-    Qt::ScreenOrientation orientation = Qt::PrimaryOrientation;
-
-    // ### FIXME: This isn't perfect. We should obey the video_route (tv connected) and
-    // the keyboard slider.
-
-    if (edge == QLatin1String("top"))
-        orientation = Qt::LandscapeOrientation;
-    else if (edge == QLatin1String("left"))
-        orientation = Qt::PortraitOrientation;
-    else if (edge == QLatin1String("right"))
-        orientation = Qt::InvertedPortraitOrientation;
-    else if (edge == QLatin1String("bottom"))
-        orientation = Qt::InvertedLandscapeOrientation;
-
-    QWindowSystemInterface::handleScreenOrientationChange(QGuiApplication::primaryScreen(), orientation);
-}
-
diff --git a/src/plugins/generic/meego/qmeegointegration.h b/src/plugins/generic/meego/qmeegointegration.h
deleted file mode 100644
index 998bbbf8d3..0000000000
--- a/src/plugins/generic/meego/qmeegointegration.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QMEEGOINTEGRATION_H
-#define QMEEGOINTEGRATION_H
-
-#include <QObject>
-#include <QDBusInterface>
-
-#include "contextkitproperty.h"
-
-QT_BEGIN_NAMESPACE
-
-class QMeeGoIntegration : public QObject
-{
-    Q_OBJECT
-public:
-    QMeeGoIntegration();
-    ~QMeeGoIntegration();
-
-private Q_SLOTS:
-    void updateScreenOrientation(const QVariant& topEdgeValue);
-
-private:
-    QContextKitProperty screenTopEdge;
-};
-
-QT_END_NAMESPACE
-
-#endif // QMEEGOINTEGRATION_H
diff --git a/src/plugins/generic/tslib/main.cpp b/src/plugins/generic/tslib/main.cpp
index 1da20722e6..737b175941 100644
--- a/src/plugins/generic/tslib/main.cpp
+++ b/src/plugins/generic/tslib/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/tslib/qtslib.cpp b/src/plugins/generic/tslib/qtslib.cpp
index 0dcf5bc6ca..a8f60b69ff 100644
--- a/src/plugins/generic/tslib/qtslib.cpp
+++ b/src/plugins/generic/tslib/qtslib.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/generic/tslib/qtslib.h b/src/plugins/generic/tslib/qtslib.h
index 9342fdfea5..cd11ca5e2f 100644
--- a/src/plugins/generic/tslib/qtslib.h
+++ b/src/plugins/generic/tslib/qtslib.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/imageformats/gif/main.cpp b/src/plugins/imageformats/gif/main.cpp
index 6b22fea2fc..5d5f4b71cd 100644
--- a/src/plugins/imageformats/gif/main.cpp
+++ b/src/plugins/imageformats/gif/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/imageformats/gif/main.h b/src/plugins/imageformats/gif/main.h
index 8fe65ccaa3..733fad95cd 100644
--- a/src/plugins/imageformats/gif/main.h
+++ b/src/plugins/imageformats/gif/main.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/imageformats/ico/ico.json b/src/plugins/imageformats/ico/ico.json
index bd46e07e54..14093ee471 100644
--- a/src/plugins/imageformats/ico/ico.json
+++ b/src/plugins/imageformats/ico/ico.json
@@ -1,4 +1,4 @@
 {
-    "Keys": [ "ico" ],
+    "Keys": [ "ico", "cur" ],
     "MimeTypes": [ "image/vnd.microsoft.icon" ]
 }
diff --git a/src/plugins/imageformats/ico/main.cpp b/src/plugins/imageformats/ico/main.cpp
index 05e6e1885c..729ec7b990 100644
--- a/src/plugins/imageformats/ico/main.cpp
+++ b/src/plugins/imageformats/ico/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,7 +39,7 @@ QT_BEGIN_NAMESPACE
 
 QImageIOPlugin::Capabilities QICOPlugin::capabilities(QIODevice *device, const QByteArray &format) const
 {
-    if (format == "ico")
+    if (format == "ico" || format == "cur")
         return Capabilities(CanRead | CanWrite);
     if (!format.isEmpty())
         return 0;
diff --git a/src/plugins/imageformats/ico/main.h b/src/plugins/imageformats/ico/main.h
index d63381976c..30534cc681 100644
--- a/src/plugins/imageformats/ico/main.h
+++ b/src/plugins/imageformats/ico/main.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/imageformats/ico/qicohandler.cpp b/src/plugins/imageformats/ico/qicohandler.cpp
index 505d6cc42b..73deb00941 100644
--- a/src/plugins/imageformats/ico/qicohandler.cpp
+++ b/src/plugins/imageformats/ico/qicohandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,7 +67,7 @@ typedef struct
 typedef struct
 {
     quint16 idReserved;   // Reserved
-    quint16 idType;       // resource type (1 for icons)
+    quint16 idType;       // resource type (1 for icons, 2 for cursors)
     quint16 idCount;      // how many images?
     ICONDIRENTRY    idEntries[1]; // the entries for each image
 } ICONDIR, *LPICONDIR;
@@ -275,10 +267,10 @@ bool ICOReader::canRead(QIODevice *iodev)
                 readBytes += ICONDIRENTRY_SIZE;
                 // ICO format does not have a magic identifier, so we read 6 different values, which will hopefully be enough to identify the file.
                 if (   ikonDir.idReserved == 0
-                    && ikonDir.idType == 1
+                    && (ikonDir.idType == 1 || ikonDir.idType == 2)
                     && ikonDir.idEntries[0].bReserved == 0
-                    && ikonDir.idEntries[0].wPlanes <= 1
-                    && ikonDir.idEntries[0].wBitCount <= 32     // Bits per pixel
+                    && (ikonDir.idEntries[0].wPlanes <= 1 || ikonDir.idType == 2)
+                    && (ikonDir.idEntries[0].wBitCount <= 32 || ikonDir.idType == 2)     // Bits per pixel
                     && ikonDir.idEntries[0].dwBytesInRes >= 40  // Must be over 40, since sizeof (infoheader) == 40
                     ) {
                     isProbablyICO = true;
@@ -339,7 +331,7 @@ bool ICOReader::readHeader()
     if (iod && !headerRead) {
         startpos = iod->pos();
         if (readIconDir(iod, &iconDir)) {
-            if (iconDir.idReserved == 0 || iconDir.idType == 1)
+            if (iconDir.idReserved == 0 && (iconDir.idType == 1 || iconDir.idType == 2))
             headerRead = true;
         }
     }
diff --git a/src/plugins/imageformats/ico/qicohandler.h b/src/plugins/imageformats/ico/qicohandler.h
index 65c0f5cf59..a470e12b5e 100644
--- a/src/plugins/imageformats/ico/qicohandler.h
+++ b/src/plugins/imageformats/ico/qicohandler.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/imageformats/jpeg/main.cpp b/src/plugins/imageformats/jpeg/main.cpp
index 902a067a6d..d577a5538c 100644
--- a/src/plugins/imageformats/jpeg/main.cpp
+++ b/src/plugins/imageformats/jpeg/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/imageformats/jpeg/main.h b/src/plugins/imageformats/jpeg/main.h
index 6f6101ad7f..2226241747 100644
--- a/src/plugins/imageformats/jpeg/main.h
+++ b/src/plugins/imageformats/jpeg/main.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.cpp b/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.cpp
index 395bb5b090..c0aaed2525 100644
--- a/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.cpp
+++ b/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.h b/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.h
index 6ce89cfe77..c6f7fea814 100644
--- a/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.h
+++ b/src/plugins/platforminputcontexts/compose/generator/qtablegenerator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforminputcontexts/compose/main.cpp b/src/plugins/platforminputcontexts/compose/main.cpp
index 728c60caf5..4f9362fa5a 100644
--- a/src/plugins/platforminputcontexts/compose/main.cpp
+++ b/src/plugins/platforminputcontexts/compose/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.cpp b/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.cpp
index 65b93b1a45..b0e34e3edc 100644
--- a/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.cpp
+++ b/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.h b/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.h
index def63486a7..897b164b3b 100644
--- a/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.h
+++ b/src/plugins/platforminputcontexts/compose/qcomposeplatforminputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforminputcontexts/ibus/interfaces/org.freedesktop.IBus.InputContext.xml b/src/plugins/platforminputcontexts/ibus/interfaces/org.freedesktop.IBus.InputContext.xml
index dbc79c178b..9c67a38c57 100644
--- a/src/plugins/platforminputcontexts/ibus/interfaces/org.freedesktop.IBus.InputContext.xml
+++ b/src/plugins/platforminputcontexts/ibus/interfaces/org.freedesktop.IBus.InputContext.xml
@@ -35,6 +35,11 @@
     <method name="GetEngine">
       <arg name="desc" direction="out" type="v"/>
     </method>
+    <method name="SetSurroundingText">
+      <arg name="text" direction="in" type="v"/>
+      <arg name="cursor_pos" direction="in" type="u"/>
+      <arg name="anchor_pos" direction="in" type="u"/>
+    </method>
     <method name="Destroy"/>
     <signal name="CommitText">
       <arg name="text" type="v"/>
@@ -75,6 +80,11 @@
     <signal name="UpdateProperty">
       <arg name="prop" type="v"/>
     </signal>
+    <signal name="RequireSurroundingText"/>
+    <signal name="DeleteSurroundingText">
+        <arg name="offset" type="i"/>
+        <arg name="n_chars" type="u"/>
+    </signal>
   </interface>
 </node>
 
diff --git a/src/plugins/platforminputcontexts/ibus/main.cpp b/src/plugins/platforminputcontexts/ibus/main.cpp
index d7c34ee9b3..a3fc05bfc3 100644
--- a/src/plugins/platforminputcontexts/ibus/main.cpp
+++ b/src/plugins/platforminputcontexts/ibus/main.cpp
@@ -1,47 +1,41 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include <qpa/qplatforminputcontextplugin_p.h>
 #include <QtCore/QStringList>
+#include <QDBusMetaType>
 #include "qibusplatforminputcontext.h"
+#include "qibustypes.h"
 
 QT_BEGIN_NAMESPACE
 
@@ -58,8 +52,13 @@ QIBusPlatformInputContext *QIbusPlatformInputContextPlugin::create(const QString
 {
     Q_UNUSED(paramList);
 
-    if (system.compare(system, QStringLiteral("ibus"), Qt::CaseInsensitive) == 0)
+    if (system.compare(system, QStringLiteral("ibus"), Qt::CaseInsensitive) == 0) {
+        qDBusRegisterMetaType<QIBusSerializable>();
+        qDBusRegisterMetaType<QIBusAttribute>();
+        qDBusRegisterMetaType<QIBusAttributeList>();
+        qDBusRegisterMetaType<QIBusText>();
         return new QIBusPlatformInputContext;
+    }
     return 0;
 }
 
diff --git a/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.cpp b/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.cpp
index 8df88b339b..454a1e6fda 100644
--- a/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.cpp
+++ b/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.cpp
@@ -1,5 +1,5 @@
 /*
- * This file was generated by qdbusxml2cpp version 0.7
+ * This file was generated by qdbusxml2cpp version 0.8
  * Command line was: qdbusxml2cpp -N -p qibusinputcontextproxy -c QIBusInputContextProxy interfaces/org.freedesktop.IBus.InputContext.xml
  *
  * qdbusxml2cpp is Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
diff --git a/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.h b/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.h
index b1e33a3ecd..b75a5e0a93 100644
--- a/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.h
+++ b/src/plugins/platforminputcontexts/ibus/qibusinputcontextproxy.h
@@ -1,5 +1,5 @@
 /*
- * This file was generated by qdbusxml2cpp version 0.7
+ * This file was generated by qdbusxml2cpp version 0.8
  * Command line was: qdbusxml2cpp -N -p qibusinputcontextproxy -c QIBusInputContextProxy interfaces/org.freedesktop.IBus.InputContext.xml
  *
  * qdbusxml2cpp is Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
@@ -8,8 +8,8 @@
  * Do not edit! All changes made to it will be lost.
  */
 
-#ifndef QIBUSINPUTCONTEXTPROXY_H_1308831153
-#define QIBUSINPUTCONTEXTPROXY_H_1308831153
+#ifndef QIBUSINPUTCONTEXTPROXY_H_1394889529
+#define QIBUSINPUTCONTEXTPROXY_H_1394889529
 
 #include <QtCore/QObject>
 #include <QtCore/QByteArray>
@@ -119,10 +119,18 @@ public Q_SLOTS: // METHODS
         return asyncCallWithArgumentList(QLatin1String("SetEngine"), argumentList);
     }
 
+    inline QDBusPendingReply<> SetSurroundingText(const QDBusVariant &text, uint cursor_pos, uint anchor_pos)
+    {
+        QList<QVariant> argumentList;
+        argumentList << QVariant::fromValue(text) << QVariant::fromValue(cursor_pos) << QVariant::fromValue(anchor_pos);
+        return asyncCallWithArgumentList(QLatin1String("SetSurroundingText"), argumentList);
+    }
+
 Q_SIGNALS: // SIGNALS
     void CommitText(const QDBusVariant &text);
     void CursorDownLookupTable();
     void CursorUpLookupTable();
+    void DeleteSurroundingText(int offset, uint n_chars);
     void Disabled();
     void Enabled();
     void ForwardKeyEvent(uint keyval, uint keycode, uint state);
@@ -132,6 +140,7 @@ Q_SIGNALS: // SIGNALS
     void PageDownLookupTable();
     void PageUpLookupTable();
     void RegisterProperties(const QDBusVariant &props);
+    void RequireSurroundingText();
     void ShowAuxiliaryText();
     void ShowLookupTable();
     void ShowPreeditText();
diff --git a/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.cpp b/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.cpp
index 53e9b171d5..990fcd0d10 100644
--- a/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.cpp
+++ b/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #include <QtDebug>
 #include <QTextCharFormat>
 #include <QGuiApplication>
+#include <QDBusVariant>
 #include <qwindow.h>
 #include <qevent.h>
 
@@ -78,6 +71,7 @@ public:
 
     bool valid;
     QString predit;
+    bool needsSurroundingText;
 };
 
 
@@ -87,6 +81,8 @@ QIBusPlatformInputContext::QIBusPlatformInputContext ()
     if (d->context) {
         connect(d->context, SIGNAL(CommitText(QDBusVariant)), SLOT(commitText(QDBusVariant)));
         connect(d->context, SIGNAL(UpdatePreeditText(QDBusVariant,uint,bool)), this, SLOT(updatePreeditText(QDBusVariant,uint,bool)));
+        connect(d->context, SIGNAL(DeleteSurroundingText(int,uint)), this, SLOT(deleteSurroundingText(int,uint)));
+        connect(d->context, SIGNAL(RequireSurroundingText()), this, SLOT(surroundingTextRequired()));
     }
     QInputMethod *p = qApp->inputMethod();
     connect(p, SIGNAL(cursorRectangleChanged()), this, SLOT(cursorRectChanged()));
@@ -135,9 +131,11 @@ void QIBusPlatformInputContext::commit()
         return;
     }
 
-    QInputMethodEvent event;
-    event.setCommitString(d->predit);
-    QCoreApplication::sendEvent(input, &event);
+    if (!d->predit.isEmpty()) {
+        QInputMethodEvent event;
+        event.setCommitString(d->predit);
+        QCoreApplication::sendEvent(input, &event);
+    }
 
     d->context->Reset();
     d->predit = QString();
@@ -146,6 +144,33 @@ void QIBusPlatformInputContext::commit()
 
 void QIBusPlatformInputContext::update(Qt::InputMethodQueries q)
 {
+    QObject *input = qApp->focusObject();
+
+    if (d->needsSurroundingText && input
+            && (q.testFlag(Qt::ImSurroundingText)
+                || q.testFlag(Qt::ImCursorPosition)
+                || q.testFlag(Qt::ImAnchorPosition))) {
+        QInputMethodQueryEvent srrndTextQuery(Qt::ImSurroundingText);
+        QInputMethodQueryEvent cursorPosQuery(Qt::ImCursorPosition);
+        QInputMethodQueryEvent anchorPosQuery(Qt::ImAnchorPosition);
+
+        QCoreApplication::sendEvent(input, &srrndTextQuery);
+        QCoreApplication::sendEvent(input, &cursorPosQuery);
+        QCoreApplication::sendEvent(input, &anchorPosQuery);
+
+        QString surroundingText = srrndTextQuery.value(Qt::ImSurroundingText).toString();
+        uint cursorPosition = cursorPosQuery.value(Qt::ImCursorPosition).toUInt();
+        uint anchorPosition = anchorPosQuery.value(Qt::ImAnchorPosition).toUInt();
+
+        QIBusText text;
+        text.text = surroundingText;
+
+        QVariant variant;
+        variant.setValue(text);
+        QDBusVariant dbusText(variant);
+
+        d->context->SetSurroundingText(dbusText, cursorPosition, anchorPosition);
+    }
     QPlatformInputContext::update(q);
 }
 
@@ -191,7 +216,7 @@ void QIBusPlatformInputContext::commitText(const QDBusVariant &text)
     QIBusText t;
     if (debug)
         qDebug() << arg.currentSignature();
-    t.fromDBusArgument(arg);
+    arg >> t;
     if (debug)
         qDebug() << "commit text:" << t.text;
 
@@ -211,7 +236,7 @@ void QIBusPlatformInputContext::updatePreeditText(const QDBusVariant &text, uint
     const QDBusArgument arg = text.variant().value<QDBusArgument>();
 
     QIBusText t;
-    t.fromDBusArgument(arg);
+    arg >> t;
     if (debug)
         qDebug() << "preedit text:" << t.text;
 
@@ -225,6 +250,27 @@ void QIBusPlatformInputContext::updatePreeditText(const QDBusVariant &text, uint
     d->predit = t.text;
 }
 
+void QIBusPlatformInputContext::surroundingTextRequired()
+{
+    if (debug)
+        qDebug() << "surroundingTextRequired";
+    d->needsSurroundingText = true;
+    update(Qt::ImSurroundingText);
+}
+
+void QIBusPlatformInputContext::deleteSurroundingText(int offset, uint n_chars)
+{
+    QObject *input = qApp->focusObject();
+    if (!input)
+        return;
+
+    if (debug)
+        qDebug() << "deleteSurroundingText" << offset << n_chars;
+
+    QInputMethodEvent event;
+    event.setCommitString("", offset, n_chars);
+    QCoreApplication::sendEvent(input, &event);
+}
 
 bool
 QIBusPlatformInputContext::x11FilterEvent(uint keyval, uint keycode, uint state, bool press)
@@ -250,7 +296,8 @@ QIBusPlatformInputContextPrivate::QIBusPlatformInputContextPrivate()
     : connection(createConnection()),
       bus(0),
       context(0),
-      valid(false)
+      valid(false),
+      needsSurroundingText(false)
 {
     if (!connection || !connection->isConnected())
         return;
@@ -284,7 +331,7 @@ QIBusPlatformInputContextPrivate::QIBusPlatformInputContextPrivate()
         IBUS_CAP_PROPERTY           = 1 << 4,
         IBUS_CAP_SURROUNDING_TEXT   = 1 << 5
     };
-    context->SetCapabilities(IBUS_CAP_PREEDIT_TEXT|IBUS_CAP_FOCUS);
+    context->SetCapabilities(IBUS_CAP_PREEDIT_TEXT|IBUS_CAP_FOCUS|IBUS_CAP_SURROUNDING_TEXT);
 
     if (debug)
         qDebug(">>>> valid!");
diff --git a/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.h b/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.h
index 400ef3914a..dda24aca08 100644
--- a/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.h
+++ b/src/plugins/platforminputcontexts/ibus/qibusplatforminputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,6 +61,8 @@ public Q_SLOTS:
     void commitText(const QDBusVariant &text);
     void updatePreeditText(const QDBusVariant &text, uint cursor_pos, bool visible);
     void cursorRectChanged();
+    void deleteSurroundingText(int offset, uint n_chars);
+    void surroundingTextRequired();
 
 private:
     QIBusPlatformInputContextPrivate *d;
diff --git a/src/plugins/platforminputcontexts/ibus/qibustypes.cpp b/src/plugins/platforminputcontexts/ibus/qibustypes.cpp
index 6ab0b1ae3e..9bc53ed5c0 100644
--- a/src/plugins/platforminputcontexts/ibus/qibustypes.cpp
+++ b/src/plugins/platforminputcontexts/ibus/qibustypes.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #include "qibustypes.h"
 #include <qtextformat.h>
 #include <QtDBus>
+#include <QHash>
 
 QT_BEGIN_NAMESPACE
 
@@ -53,23 +46,45 @@ QIBusSerializable::~QIBusSerializable()
 {
 }
 
-void QIBusSerializable::fromDBusArgument(const QDBusArgument &arg)
+const QDBusArgument &operator>>(const QDBusArgument &argument, QIBusSerializable &object)
 {
-    arg >> name;
-    arg.beginMap();
-    while (!arg.atEnd()) {
-        arg.beginMapEntry();
+    argument >> object.name;
+
+    argument.beginMap();
+    while (!argument.atEnd()) {
+        argument.beginMapEntry();
         QString key;
         QDBusVariant value;
-        arg >> key;
-        arg >> value;
-        arg.endMapEntry();
-        attachments[key] = value.variant().value<QDBusArgument>();
+        argument >> key;
+        argument >> value;
+        argument.endMapEntry();
+        object.attachments[key] = value.variant().value<QDBusArgument>();
     }
-    arg.endMap();
+    argument.endMap();
+    return argument;
 }
 
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusSerializable &object)
+{
+    argument << object.name;
+
+    argument.beginMap(qMetaTypeId<QString>(), qMetaTypeId<QDBusVariant>());
+
+    QHashIterator<QString, QDBusArgument> i(object.attachments);
+    while (i.hasNext()) {
+        i.next();
+
+        argument.beginMapEntry();
+        argument << i.key();
 
+        QDBusVariant variant(i.value().asVariant());
+
+        argument << variant;
+        argument.endMapEntry();
+    }
+    argument.endMap();
+    return argument;
+}
 
 QIBusAttribute::QIBusAttribute()
     : type(Invalid),
@@ -77,28 +92,46 @@ QIBusAttribute::QIBusAttribute()
       start(0),
       end(0)
 {
+    name = "IBusAttribute";
 }
 
 QIBusAttribute::~QIBusAttribute()
 {
+}
+
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusAttribute &attribute)
+{
+    argument.beginStructure();
+
+    argument << static_cast<const QIBusSerializable &>(attribute);
 
+    quint32 t = (quint32) attribute.type;
+    argument << t;
+    argument << attribute.value;
+    argument << attribute.start;
+    argument << attribute.end;
+
+    argument.endStructure();
+
+    return argument;
 }
 
-void QIBusAttribute::fromDBusArgument(const QDBusArgument &arg)
+const QDBusArgument &operator>>(const QDBusArgument &argument, QIBusAttribute &attribute)
 {
-//    qDebug() << "QIBusAttribute::fromDBusArgument()" << arg.currentSignature();
-    arg.beginStructure();
+    argument.beginStructure();
 
-    QIBusSerializable::fromDBusArgument(arg);
+    argument >> static_cast<QIBusSerializable &>(attribute);
 
     quint32 t;
-    arg >> t;
-    type = (Type)t;
-    arg >> value;
-    arg >> start;
-    arg >> end;
+    argument >> t;
+    attribute.type = (QIBusAttribute::Type) t;
+    argument >> attribute.value;
+    argument >> attribute.start;
+    argument >> attribute.end;
 
-    arg.endStructure();
+    argument.endStructure();
+
+    return argument;
 }
 
 QTextFormat QIBusAttribute::format() const
@@ -141,36 +174,53 @@ QTextFormat QIBusAttribute::format() const
     return fmt;
 }
 
-
 QIBusAttributeList::QIBusAttributeList()
 {
-
+    name = "IBusAttrList";
 }
 
 QIBusAttributeList::~QIBusAttributeList()
 {
+}
+
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusAttributeList &attrList)
+{
+    argument.beginStructure();
+
+    argument << static_cast<const QIBusSerializable &>(attrList);
+
+    argument.beginArray(qMetaTypeId<QDBusVariant>());
+    for (int i = 0; i < attrList.attributes.size(); ++i) {
+        QVariant variant;
+        variant.setValue(attrList.attributes.at(i));
+        argument << QDBusVariant (variant);
+    }
+    argument.endArray();
 
+    argument.endStructure();
+    return argument;
 }
 
-void QIBusAttributeList::fromDBusArgument(const QDBusArgument &arg)
+const QDBusArgument &operator>>(const QDBusArgument &arg, QIBusAttributeList &attrList)
 {
 //    qDebug() << "QIBusAttributeList::fromDBusArgument()" << arg.currentSignature();
     arg.beginStructure();
 
-    QIBusSerializable::fromDBusArgument(arg);
+    arg >> static_cast<QIBusSerializable &>(attrList);
 
     arg.beginArray();
-    while(!arg.atEnd()) {
+    while (!arg.atEnd()) {
         QDBusVariant var;
         arg >> var;
 
         QIBusAttribute attr;
-        attr.fromDBusArgument(var.variant().value<QDBusArgument>());
-        attributes.append(attr);
+        var.variant().value<QDBusArgument>() >> attr;
+        attrList.attributes.append(attr);
     }
     arg.endArray();
 
     arg.endStructure();
+    return arg;
 }
 
 QList<QInputMethodEvent::Attribute> QIBusAttributeList::imAttributes() const
@@ -183,30 +233,40 @@ QList<QInputMethodEvent::Attribute> QIBusAttributeList::imAttributes() const
     return imAttrs;
 }
 
-
 QIBusText::QIBusText()
 {
-
+    name = "IBusText";
 }
 
 QIBusText::~QIBusText()
 {
+}
 
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusText &text)
+{
+    argument.beginStructure();
+
+    argument << static_cast<const QIBusSerializable &>(text);
+
+    argument << text.text << text.attributes;
+    argument.endStructure();
+    return argument;
 }
 
-void QIBusText::fromDBusArgument(const QDBusArgument &arg)
+const QDBusArgument &operator>>(const QDBusArgument &argument, QIBusText &text)
 {
 //    qDebug() << "QIBusText::fromDBusArgument()" << arg.currentSignature();
-    arg.beginStructure();
+    argument.beginStructure();
 
-    QIBusSerializable::fromDBusArgument(arg);
+    argument >> static_cast<QIBusSerializable &>(text);
 
-    arg >> text;
+    argument >> text.text;
     QDBusVariant variant;
-    arg >> variant;
-    attributes.fromDBusArgument(variant.variant().value<QDBusArgument>());
+    argument >> variant;
+    variant.variant().value<QDBusArgument>() >> text.attributes;
 
-    arg.endStructure();
+    argument.endStructure();
+    return argument;
 }
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforminputcontexts/ibus/qibustypes.h b/src/plugins/platforminputcontexts/ibus/qibustypes.h
index 8e6f853a52..2ec3b019ff 100644
--- a/src/plugins/platforminputcontexts/ibus/qibustypes.h
+++ b/src/plugins/platforminputcontexts/ibus/qibustypes.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,19 +35,16 @@
 
 #include <qvector.h>
 #include <qevent.h>
+#include <QDBusArgument>
 
 QT_BEGIN_NAMESPACE
 
-class QDBusArgument;
-
 class QIBusSerializable
 {
 public:
     QIBusSerializable();
     virtual ~QIBusSerializable();
 
-    virtual void fromDBusArgument(const QDBusArgument &arg);
-
     QString name;
     QHash<QString, QDBusArgument>  attachments;
 };
@@ -81,7 +70,6 @@ public:
     QIBusAttribute();
     ~QIBusAttribute();
 
-    void fromDBusArgument(const QDBusArgument &arg);
     QTextFormat format() const;
 
     Type type;
@@ -96,8 +84,6 @@ public:
     QIBusAttributeList();
     ~QIBusAttributeList();
 
-    void fromDBusArgument(const QDBusArgument &arg);
-
     QList<QInputMethodEvent::Attribute> imAttributes() const;
 
     QVector<QIBusAttribute> attributes;
@@ -109,12 +95,27 @@ public:
     QIBusText();
     ~QIBusText();
 
-    void fromDBusArgument(const QDBusArgument &arg);
-
     QString text;
     QIBusAttributeList attributes;
 };
 
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusSerializable &object);
+const QDBusArgument &operator>>(const QDBusArgument &argument, QIBusSerializable &object);
+
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusAttribute &attribute);
+const QDBusArgument &operator>>(const QDBusArgument &argument, QIBusAttribute &attribute);
+
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusAttributeList &attributeList);
+const QDBusArgument &operator>>(const QDBusArgument &arg, QIBusAttributeList &attrList);
+
+QDBusArgument &operator<<(QDBusArgument &argument, const QIBusText &text);
+const QDBusArgument &operator>>(const QDBusArgument &argument, QIBusText &text);
+
 QT_END_NAMESPACE
 
+Q_DECLARE_METATYPE(QIBusSerializable)
+Q_DECLARE_METATYPE(QIBusAttribute)
+Q_DECLARE_METATYPE(QIBusAttributeList)
+Q_DECLARE_METATYPE(QIBusText)
+
 #endif
diff --git a/src/plugins/platforms/android/android.pro b/src/plugins/platforms/android/android.pro
index 243eea071a..f55bc40a55 100644
--- a/src/plugins/platforms/android/android.pro
+++ b/src/plugins/platforms/android/android.pro
@@ -21,7 +21,9 @@ CONFIG += qpa/genericunixfontdatabase
 
 OTHER_FILES += $$PWD/android.json
 
-INCLUDEPATH += $$PWD
+INCLUDEPATH += \
+    $$PWD \
+    $$QT_SOURCE_TREE/src/3rdparty/android
 
 SOURCES += $$PWD/androidplatformplugin.cpp \
            $$PWD/androidjnimain.cpp \
@@ -45,10 +47,10 @@ SOURCES += $$PWD/androidplatformplugin.cpp \
            $$PWD/qandroidplatformscreen.cpp \
            $$PWD/qandroidplatformwindow.cpp \
            $$PWD/qandroidplatformopenglwindow.cpp \
-           $$PWD/qandroidplatformrasterwindow.cpp \
            $$PWD/qandroidplatformbackingstore.cpp \
            $$PWD/qandroidplatformopenglcontext.cpp \
-           $$PWD/qandroidplatformforeignwindow.cpp
+           $$PWD/qandroidplatformforeignwindow.cpp \
+           $$PWD/qandroideventdispatcher.cpp
 
 HEADERS += $$PWD/qandroidplatformintegration.h \
            $$PWD/androidjnimain.h \
@@ -72,10 +74,13 @@ HEADERS += $$PWD/qandroidplatformintegration.h \
            $$PWD/qandroidplatformscreen.h \
            $$PWD/qandroidplatformwindow.h \
            $$PWD/qandroidplatformopenglwindow.h \
-           $$PWD/qandroidplatformrasterwindow.h \
            $$PWD/qandroidplatformbackingstore.h \
            $$PWD/qandroidplatformopenglcontext.h \
-           $$PWD/qandroidplatformforeignwindow.h
+           $$PWD/qandroidplatformforeignwindow.h \
+           $$PWD/qandroideventdispatcher.h
+
+android-style-assets: SOURCES += $$PWD/extract.cpp
+else: SOURCES += $$PWD/extract-dummy.cpp
 
 #Non-standard install directory, QTBUG-29859
 DESTDIR = $$DESTDIR/android
diff --git a/src/plugins/platforms/android/androidjniaccessibility.cpp b/src/plugins/platforms/android/androidjniaccessibility.cpp
index 3f58597c9b..7229fd7af5 100644
--- a/src/plugins/platforms/android/androidjniaccessibility.cpp
+++ b/src/plugins/platforms/android/androidjniaccessibility.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,10 +35,12 @@
 #include "androidjnimain.h"
 #include "qandroidplatformintegration.h"
 #include "qpa/qplatformaccessibility.h"
+#include <QtPlatformSupport/private/qaccessiblebridgeutils_p.h>
 #include "qguiapplication.h"
 #include "qwindow.h"
 #include "qrect.h"
 #include "QtGui/qaccessible.h"
+#include <QtCore/qmath.h>
 #include <QtCore/private/qjnihelpers_p.h>
 
 #include "qdebug.h"
@@ -67,6 +61,7 @@ namespace QtAndroidAccessibility
     static jmethodID m_setEnabledMethodID = 0;
     static jmethodID m_setFocusableMethodID = 0;
     static jmethodID m_setFocusedMethodID = 0;
+    static jmethodID m_setScrollableMethodID = 0;
     static jmethodID m_setTextSelectionMethodID = 0;
     static jmethodID m_setVisibleToUserMethodID = 0;
 
@@ -169,6 +164,18 @@ namespace QtAndroidAccessibility
         return false;
     }
 
+    static jboolean scrollForward(JNIEnv */*env*/, jobject /*thiz*/, jint objectId)
+    {
+        QAccessibleInterface *iface = interfaceFromId(objectId);
+        return QAccessibleBridgeUtils::performEffectiveAction(iface, QAccessibleActionInterface::increaseAction());
+    }
+
+    static jboolean scrollBackward(JNIEnv */*env*/, jobject /*thiz*/, jint objectId)
+    {
+        QAccessibleInterface *iface = interfaceFromId(objectId);
+        return QAccessibleBridgeUtils::performEffectiveAction(iface, QAccessibleActionInterface::decreaseAction());
+    }
+
 
 #define FIND_AND_CHECK_CLASS(CLASS_NAME) \
 clazz = env->FindClass(CLASS_NAME); \
@@ -202,6 +209,11 @@ if (!clazz) { \
             return false;
         }
         QAccessible::State state = iface->state();
+        const QStringList actions = QAccessibleBridgeUtils::effectiveActionNames(iface);
+        const bool hasClickableAction = actions.contains(QAccessibleActionInterface::pressAction())
+                                        || actions.contains(QAccessibleActionInterface::toggleAction());
+        const bool hasIncreaseAction = actions.contains(QAccessibleActionInterface::increaseAction());
+        const bool hasDecreaseAction = actions.contains(QAccessibleActionInterface::decreaseAction());
 
         // try to fill in the text property, this is what the screen reader reads
         QString desc = iface->text(QAccessible::Value);
@@ -219,21 +231,26 @@ if (!clazz) { \
         }
 
         env->CallVoidMethod(node, m_setEnabledMethodID, !state.disabled);
+        env->CallVoidMethod(node, m_setCheckableMethodID, (bool)state.checkable);
         env->CallVoidMethod(node, m_setCheckedMethodID, (bool)state.checked);
         env->CallVoidMethod(node, m_setFocusableMethodID, (bool)state.focusable);
         env->CallVoidMethod(node, m_setFocusedMethodID, (bool)state.focused);
-        env->CallVoidMethod(node, m_setCheckableMethodID, (bool)state.checkable);
         env->CallVoidMethod(node, m_setVisibleToUserMethodID, !state.invisible);
+        env->CallVoidMethod(node, m_setScrollableMethodID, hasIncreaseAction || hasDecreaseAction);
+        env->CallVoidMethod(node, m_setClickableMethodID, hasClickableAction);
+
+        // Add ACTION_CLICK
+        if (hasClickableAction)
+            env->CallVoidMethod(node, m_addActionMethodID, (int)16);    // ACTION_CLICK defined in AccessibilityNodeInfo
+
+        // Add ACTION_SCROLL_FORWARD
+        if (hasIncreaseAction)
+            env->CallVoidMethod(node, m_addActionMethodID, (int)4096);    // ACTION_SCROLL_FORWARD defined in AccessibilityNodeInfo
+
+        // Add ACTION_SCROLL_BACKWARD
+        if (hasDecreaseAction)
+            env->CallVoidMethod(node, m_addActionMethodID, (int)8192);    // ACTION_SCROLL_BACKWARD defined in AccessibilityNodeInfo
 
-        if (iface->actionInterface()) {
-            QStringList actions = iface->actionInterface()->actionNames();
-            bool clickable = actions.contains(QAccessibleActionInterface::pressAction());
-            bool toggle = actions.contains(QAccessibleActionInterface::toggleAction());
-            if (clickable || toggle) {
-                env->CallVoidMethod(node, m_setClickableMethodID, (bool)clickable);
-                env->CallVoidMethod(node, m_addActionMethodID, (int)16);    // ACTION_CLICK defined in AccessibilityNodeInfo
-            }
-        }
 
         jstring jdesc = env->NewString((jchar*) desc.constData(), (jsize) desc.size());
         //CALL_METHOD(node, "setText", "(Ljava/lang/CharSequence;)V", jdesc)
@@ -251,6 +268,8 @@ if (!clazz) { \
         {"hitTest", "(FF)I", (void*)hitTest},
         {"populateNode", "(ILandroid/view/accessibility/AccessibilityNodeInfo;)Z", (void*)populateNode},
         {"clickAction", "(I)Z", (void*)clickAction},
+        {"scrollForward", "(I)Z", (void*)scrollForward},
+        {"scrollBackward", "(I)Z", (void*)scrollBackward},
     };
 
 #define GET_AND_CHECK_STATIC_METHOD(VAR, CLASS, METHOD_NAME, METHOD_SIGNATURE) \
@@ -283,6 +302,7 @@ if (!clazz) { \
         GET_AND_CHECK_STATIC_METHOD(m_setEnabledMethodID, nodeInfoClass, "setEnabled", "(Z)V");
         GET_AND_CHECK_STATIC_METHOD(m_setFocusableMethodID, nodeInfoClass, "setFocusable", "(Z)V");
         GET_AND_CHECK_STATIC_METHOD(m_setFocusedMethodID, nodeInfoClass, "setFocused", "(Z)V");
+        GET_AND_CHECK_STATIC_METHOD(m_setScrollableMethodID, nodeInfoClass, "setScrollable", "(Z)V");
         GET_AND_CHECK_STATIC_METHOD(m_setVisibleToUserMethodID, nodeInfoClass, "setVisibleToUser", "(Z)V");
 
         if (QtAndroidPrivate::androidSdkVersion() >= 18) {
diff --git a/src/plugins/platforms/android/androidjniaccessibility.h b/src/plugins/platforms/android/androidjniaccessibility.h
index 3ca89242fe..15a9aff7ab 100644
--- a/src/plugins/platforms/android/androidjniaccessibility.h
+++ b/src/plugins/platforms/android/androidjniaccessibility.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/androidjniclipboard.cpp b/src/plugins/platforms/android/androidjniclipboard.cpp
index 712a384a36..e217ca361e 100644
--- a/src/plugins/platforms/android/androidjniclipboard.cpp
+++ b/src/plugins/platforms/android/androidjniclipboard.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/androidjniclipboard.h b/src/plugins/platforms/android/androidjniclipboard.h
index bd833226af..42920ec7cd 100644
--- a/src/plugins/platforms/android/androidjniclipboard.h
+++ b/src/plugins/platforms/android/androidjniclipboard.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/androidjniinput.cpp b/src/plugins/platforms/android/androidjniinput.cpp
index 2c4b664487..d2978dd48e 100644
--- a/src/plugins/platforms/android/androidjniinput.cpp
+++ b/src/plugins/platforms/android/androidjniinput.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/androidjniinput.h b/src/plugins/platforms/android/androidjniinput.h
index 5a7357633c..093c24bade 100644
--- a/src/plugins/platforms/android/androidjniinput.h
+++ b/src/plugins/platforms/android/androidjniinput.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/androidjnimain.cpp b/src/plugins/platforms/android/androidjnimain.cpp
index c571e16062..11f0bc5ffe 100644
--- a/src/plugins/platforms/android/androidjnimain.cpp
+++ b/src/plugins/platforms/android/androidjnimain.cpp
@@ -1,60 +1,41 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-#include <QtGui/private/qguiapplication_p.h>
-
 #include <dlfcn.h>
 #include <pthread.h>
-#include <qcoreapplication.h>
-#include <qimage.h>
-#include <qpoint.h>
 #include <qplugin.h>
-#include <qsemaphore.h>
-#include <qmutex.h>
 #include <qdebug.h>
-#include <qglobal.h>
-#include <qobjectdefs.h>
-#include <QtCore/private/qjni_p.h>
-#include <stdlib.h>
 
 #include "androidjnimain.h"
 #include "androidjniaccessibility.h"
@@ -63,14 +44,16 @@
 #include "androidjnimenu.h"
 #include "qandroidplatformdialoghelpers.h"
 #include "qandroidplatformintegration.h"
-
-#include <qabstracteventdispatcher.h>
+#include "qandroidassetsfileenginehandler.h"
 
 #include <android/bitmap.h>
 #include <android/asset_manager_jni.h>
-#include "qandroidassetsfileenginehandler.h"
+#include "qandroideventdispatcher.h"
 #include <android/api-level.h>
+
 #include <QtCore/private/qjnihelpers_p.h>
+#include <QtCore/private/qjni_p.h>
+#include <QtGui/private/qguiapplication_p.h>
 
 #include <qpa/qwindowsysteminterface.h>
 
@@ -78,42 +61,41 @@ Q_IMPORT_PLUGIN(QAndroidPlatformIntegrationPlugin)
 
 QT_BEGIN_NAMESPACE
 
-static JavaVM *m_javaVM = NULL;
-static jclass m_applicationClass  = NULL;
-static jobject m_classLoaderObject = NULL;
-static jmethodID m_loadClassMethodID = NULL;
-static AAssetManager *m_assetManager = NULL;
-static jobject m_resourcesObj;
-static jobject m_activityObject = NULL;
-static jmethodID m_createSurfaceMethodID = 0;
-static jmethodID m_insertNativeViewMethodID = 0;
-static jmethodID m_setSurfaceGeometryMethodID = 0;
-static jmethodID m_destroySurfaceMethodID = 0;
+static JavaVM *m_javaVM = Q_NULLPTR;
+static jclass m_applicationClass  = Q_NULLPTR;
+static jobject m_classLoaderObject = Q_NULLPTR;
+static jmethodID m_loadClassMethodID = Q_NULLPTR;
+static AAssetManager *m_assetManager = Q_NULLPTR;
+static jobject m_resourcesObj = Q_NULLPTR;
+static jobject m_activityObject = Q_NULLPTR;
+static jmethodID m_createSurfaceMethodID = Q_NULLPTR;
+static jmethodID m_setSurfaceGeometryMethodID = Q_NULLPTR;
+static jmethodID m_destroySurfaceMethodID = Q_NULLPTR;
 
 static bool m_activityActive = true; // defaults to true because when the platform plugin is
                                      // initialized, QtActivity::onResume() has already been called
 
-static jclass m_bitmapClass  = 0;
-static jmethodID m_createBitmapMethodID = 0;
-static jobject m_ARGB_8888_BitmapConfigValue = 0;
-static jobject m_RGB_565_BitmapConfigValue = 0;
+static jclass m_bitmapClass  = Q_NULLPTR;
+static jmethodID m_createBitmapMethodID = Q_NULLPTR;
+static jobject m_ARGB_8888_BitmapConfigValue = Q_NULLPTR;
+static jobject m_RGB_565_BitmapConfigValue = Q_NULLPTR;
 
-jmethodID m_setFullScreenMethodID = 0;
+jmethodID m_setFullScreenMethodID = Q_NULLPTR;
 static bool m_statusBarShowing = true;
 
-static jclass m_bitmapDrawableClass = 0;
-static jmethodID m_bitmapDrawableConstructorMethodID = 0;
+static jclass m_bitmapDrawableClass = Q_NULLPTR;
+static jmethodID m_bitmapDrawableConstructorMethodID = Q_NULLPTR;
 
 extern "C" typedef int (*Main)(int, char **); //use the standard main method to start the application
-static Main m_main = NULL;
-static void *m_mainLibraryHnd = NULL;
+static Main m_main = Q_NULLPTR;
+static void *m_mainLibraryHnd = Q_NULLPTR;
 static QList<QByteArray> m_applicationParams;
 
 struct SurfaceData
 {
     ~SurfaceData() { delete surface; }
-    QJNIObjectPrivate *surface = 0;
-    AndroidSurfaceClient *client = 0;
+    QJNIObjectPrivate *surface = Q_NULLPTR;
+    AndroidSurfaceClient *client = Q_NULLPTR;
 };
 
 QHash<int, AndroidSurfaceClient *> m_surfaces;
@@ -121,11 +103,8 @@ QHash<int, AndroidSurfaceClient *> m_surfaces;
 static QMutex m_surfacesMutex;
 static int m_surfaceId = 1;
 
-static QSemaphore m_quitAppSemaphore;
-static QSemaphore m_pauseApplicationSemaphore;
-static QMutex m_pauseApplicationMutex;
 
-static QAndroidPlatformIntegration *m_androidPlatformIntegration = 0;
+static QAndroidPlatformIntegration *m_androidPlatformIntegration = Q_NULLPTR;
 
 static int m_desktopWidthPixels  = 0;
 static int m_desktopHeightPixels = 0;
@@ -133,7 +112,7 @@ static double m_scaledDensity = 0;
 
 static volatile bool m_pauseApplication;
 
-static AndroidAssetsFileEngineHandler *m_androidAssetsFileEngineHandler = 0;
+static AndroidAssetsFileEngineHandler *m_androidAssetsFileEngineHandler = Q_NULLPTR;
 
 
 
@@ -183,14 +162,6 @@ namespace QtAndroid
         return m_javaVM;
     }
 
-    jclass findClass(const QString &className, JNIEnv *env)
-    {
-        return static_cast<jclass>(env->CallObjectMethod(m_classLoaderObject,
-                                                         m_loadClassMethodID,
-                                                         env->NewString(reinterpret_cast<const jchar *>(className.constData()),
-                                                                        jsize(className.length()))));
-    }
-
     AAssetManager *assetManager()
     {
         return m_assetManager;
@@ -212,7 +183,7 @@ namespace QtAndroid
             return;
 
         QtAndroid::AttachedJNIEnv env;
-        if (env.jniEnv == 0) {
+        if (!env.jniEnv) {
             qWarning("Failed to get JNI Environment.");
             return;
         }
@@ -227,7 +198,7 @@ namespace QtAndroid
             return;
 
         QtAndroid::AttachedJNIEnv env;
-        if (env.jniEnv == 0) {
+        if (!env.jniEnv) {
             qWarning("Failed to get JNI Environment.");
             return;
         }
@@ -365,33 +336,33 @@ namespace QtAndroid
 
     int insertNativeView(jobject view, const QRect &geometry)
     {
-        QJNIEnvironmentPrivate env;
-        if (!env)
-            return 0;
-
         m_surfacesMutex.lock();
         const int surfaceId = m_surfaceId++;
+        m_surfaces[surfaceId] = Q_NULLPTR; // dummy
         m_surfacesMutex.unlock();
 
         jint x = 0, y = 0, w = -1, h = -1;
-        if (!geometry.isNull()) {
-            x = geometry.x();
-            y = geometry.y();
-            w = std::max(geometry.width(), 1);
-            h = std::max(geometry.height(), 1);
-        }
-
-        env->CallStaticVoidMethod(m_applicationClass,
-                                  m_insertNativeViewMethodID,
-                                  surfaceId,
-                                  view,
-                                  x, y, w, h);
+        if (!geometry.isNull())
+            geometry.getRect(&x, &y, &w, &h);
+
+        QJNIObjectPrivate::callStaticMethod<void>(m_applicationClass,
+                                                  "insertNativeView",
+                                                  "(ILandroid/view/View;IIII)V",
+                                                  surfaceId,
+                                                  view,
+                                                  x,
+                                                  y,
+                                                  qMax(w, 1),
+                                                  qMax(h, 1));
 
         return surfaceId;
     }
 
     void setSurfaceGeometry(int surfaceId, const QRect &geometry)
     {
+        if (surfaceId == -1)
+            return;
+
         QJNIEnvironmentPrivate env;
         if (!env)
             return;
@@ -411,10 +382,15 @@ namespace QtAndroid
 
     void destroySurface(int surfaceId)
     {
+        if (surfaceId == -1)
+            return;
+
         QMutexLocker lock(&m_surfacesMutex);
         const auto &it = m_surfaces.find(surfaceId);
         if (it != m_surfaces.end())
             m_surfaces.remove(surfaceId);
+        if (m_surfaces.isEmpty())
+            m_surfaceId = 1;
 
         QJNIEnvironmentPrivate env;
         if (!env)
@@ -425,12 +401,40 @@ namespace QtAndroid
                                      surfaceId);
     }
 
+    void bringChildToFront(int surfaceId)
+    {
+        if (surfaceId == -1)
+            return;
+
+        QJNIObjectPrivate::callStaticMethod<void>(m_applicationClass,
+                                                  "bringChildToFront",
+                                                  "(I)V",
+                                                  surfaceId);
+    }
+
+    void bringChildToBack(int surfaceId)
+    {
+        if (surfaceId == -1)
+            return;
+
+        QJNIObjectPrivate::callStaticMethod<void>(m_applicationClass,
+                                                  "bringChildToBack",
+                                                  "(I)V",
+                                                  surfaceId);
+    }
+
+    bool blockEventLoopsWhenSuspended()
+    {
+        static bool block = qgetenv("QT_BLOCK_EVENT_LOOPS_WHEN_SUSPENDED").toInt();
+        return block;
+    }
+
 } // namespace QtAndroid
 
 
 static jboolean startQtAndroidPlugin(JNIEnv* /*env*/, jobject /*object*//*, jobject applicationAssetManager*/)
 {
-    m_androidPlatformIntegration = 0;
+    m_androidPlatformIntegration = Q_NULLPTR;
     m_androidAssetsFileEngineHandler = new AndroidAssetsFileEngineHandler();
     return true;
 }
@@ -449,7 +453,8 @@ static void *startMainMethod(void */*data*/)
         if (res < 0)
             qWarning() << "dlclose failed:" << dlerror();
     }
-
+    m_mainLibraryHnd = Q_NULLPTR;
+    m_main = Q_NULLPTR;
     QtAndroid::AttachedJNIEnv env;
     if (!env.jniEnv)
         return 0;
@@ -464,7 +469,7 @@ static void *startMainMethod(void */*data*/)
 
 static jboolean startQtApplication(JNIEnv *env, jobject /*object*/, jstring paramsString, jstring environmentString)
 {
-    m_mainLibraryHnd = NULL;
+    m_mainLibraryHnd = Q_NULLPTR;
     { // Set env. vars
         const char *nativeString = env->GetStringUTFChars(environmentString, 0);
         const QList<QByteArray> envVars = QByteArray(nativeString).split('\t');
@@ -490,7 +495,7 @@ static jboolean startQtApplication(JNIEnv *env, jobject /*object*/, jstring para
         // Obtain a handle to the main library (the library that contains the main() function).
         // This library should already be loaded, and calling dlopen() will just return a reference to it.
         m_mainLibraryHnd = dlopen(m_applicationParams.first().data(), 0);
-        if (m_mainLibraryHnd == NULL) {
+        if (m_mainLibraryHnd == Q_NULLPTR) {
             qCritical() << "dlopen failed:" << dlerror();
             return false;
         }
@@ -507,15 +512,16 @@ static jboolean startQtApplication(JNIEnv *env, jobject /*object*/, jstring para
     }
 
     pthread_t appThread;
-    return pthread_create(&appThread, NULL, startMainMethod, NULL) == 0;
+    return pthread_create(&appThread, Q_NULLPTR, startMainMethod, Q_NULLPTR) == 0;
 }
 
 
 static void quitQtAndroidPlugin(JNIEnv *env, jclass /*clazz*/)
 {
     Q_UNUSED(env);
-    m_androidPlatformIntegration = 0;
+    m_androidPlatformIntegration = Q_NULLPTR;
     delete m_androidAssetsFileEngineHandler;
+    m_androidAssetsFileEngineHandler = Q_NULLPTR;
 }
 
 static void terminateQt(JNIEnv *env, jclass /*clazz*/)
@@ -534,14 +540,18 @@ static void terminateQt(JNIEnv *env, jclass /*clazz*/)
         env->DeleteGlobalRef(m_RGB_565_BitmapConfigValue);
     if (m_bitmapDrawableClass)
         env->DeleteGlobalRef(m_bitmapDrawableClass);
-    m_androidPlatformIntegration = 0;
+    m_androidPlatformIntegration = Q_NULLPTR;
     delete m_androidAssetsFileEngineHandler;
+    m_androidAssetsFileEngineHandler = Q_NULLPTR;
 }
 
 static void setSurface(JNIEnv *env, jobject /*thiz*/, jint id, jobject jSurface, jint w, jint h)
 {
     QMutexLocker lock(&m_surfacesMutex);
     const auto &it = m_surfaces.find(id);
+    if (it.value() == Q_NULLPTR) // This should never happen...
+        return;
+
     if (it == m_surfaces.end()) {
         qWarning()<<"Can't find surface" << id;
         return;
@@ -584,11 +594,11 @@ static void updateWindow(JNIEnv */*env*/, jobject /*thiz*/)
     if (!m_androidPlatformIntegration)
         return;
 
-    if (QGuiApplication::instance() != 0) {
+    if (QGuiApplication::instance() != Q_NULLPTR) {
         foreach (QWindow *w, QGuiApplication::topLevelWindows()) {
             QRect availableGeometry = w->screen()->availableGeometry();
             if (w->geometry().width() > 0 && w->geometry().height() > 0 && availableGeometry.width() > 0 && availableGeometry.height() > 0)
-                QWindowSystemInterface::handleExposeEvent(w, QRegion(w->geometry()));
+                QWindowSystemInterface::handleExposeEvent(w, QRegion(QRect(QPoint(), w->geometry().size())));
         }
     }
 
@@ -601,10 +611,22 @@ static void updateApplicationState(JNIEnv */*env*/, jobject /*thiz*/, jint state
 {
     m_activityActive = (state == Qt::ApplicationActive);
 
-    if (!m_androidPlatformIntegration || !QGuiApplicationPrivate::platformIntegration())
+    if (!m_main || !m_androidPlatformIntegration || !QGuiApplicationPrivate::platformIntegration())
         return;
 
-    QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState(state));
+    if (state <= Qt::ApplicationInactive) {
+        // Don't send timers and sockets events anymore if we are going to hide all windows
+        QAndroidEventDispatcherStopper::instance()->goingToStop(true);
+        QCoreApplication::processEvents();
+        QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState(state));
+        QWindowSystemInterface::flushWindowSystemEvents();
+        if (state == Qt::ApplicationSuspended)
+            QAndroidEventDispatcherStopper::instance()->stopAll();
+    } else {
+        QAndroidEventDispatcherStopper::instance()->startAll();
+        QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState(state));
+        QAndroidEventDispatcherStopper::instance()->goingToStop(false);
+    }
 }
 
 static void handleOrientationChanged(JNIEnv */*env*/, jobject /*thiz*/, jint newRotation, jint nativeOrientation)
@@ -709,7 +731,6 @@ static int registerNatives(JNIEnv *env)
     }
 
     GET_AND_CHECK_STATIC_METHOD(m_createSurfaceMethodID, m_applicationClass, "createSurface", "(IZIIIII)V");
-    GET_AND_CHECK_STATIC_METHOD(m_insertNativeViewMethodID, m_applicationClass, "insertNativeView", "(ILandroid/view/View;IIII)V");
     GET_AND_CHECK_STATIC_METHOD(m_setSurfaceGeometryMethodID, m_applicationClass, "setSurfaceGeometry", "(IIIII)V");
     GET_AND_CHECK_STATIC_METHOD(m_destroySurfaceMethodID, m_applicationClass, "destroySurface", "(I)V");
 
@@ -767,8 +788,8 @@ Q_DECL_EXPORT jint JNICALL JNI_OnLoad(JavaVM *vm, void */*reserved*/)
 
     __android_log_print(ANDROID_LOG_INFO, "Qt", "qt start");
     UnionJNIEnvToVoid uenv;
-    uenv.venv = NULL;
-    m_javaVM = 0;
+    uenv.venv = Q_NULLPTR;
+    m_javaVM = Q_NULLPTR;
 
     if (vm->GetEnv(&uenv.venv, JNI_VERSION_1_4) != JNI_OK) {
         __android_log_print(ANDROID_LOG_FATAL, "Qt", "GetEnv failed");
diff --git a/src/plugins/platforms/android/androidjnimain.h b/src/plugins/platforms/android/androidjnimain.h
index 29896529ca..01330ce283 100644
--- a/src/plugins/platforms/android/androidjnimain.h
+++ b/src/plugins/platforms/android/androidjnimain.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -72,13 +64,14 @@ namespace QtAndroid
     int insertNativeView(jobject view, const QRect &geometry);
     void setSurfaceGeometry(int surfaceId, const QRect &geometry);
     void destroySurface(int surfaceId);
+    void bringChildToFront(int surfaceId);
+    void bringChildToBack(int surfaceId);
 
     QWindow *topLevelWindowAt(const QPoint &globalPos);
     int desktopWidthPixels();
     int desktopHeightPixels();
     double scaledDensity();
     JavaVM *javaVM();
-    jclass findClass(const QString &className, JNIEnv *env);
     AAssetManager *assetManager();
     jclass applicationClass();
     jobject activity();
@@ -100,7 +93,7 @@ namespace QtAndroid
             if (QtAndroid::javaVM()->GetEnv((void**)&jniEnv, JNI_VERSION_1_6) < 0) {
                 if (QtAndroid::javaVM()->AttachCurrentThread(&jniEnv, NULL) < 0) {
                     __android_log_print(ANDROID_LOG_ERROR, "Qt", "AttachCurrentThread failed");
-                    jniEnv = 0;
+                    jniEnv = Q_NULLPTR;
                     return;
                 }
                 attached = true;
@@ -120,6 +113,7 @@ namespace QtAndroid
     const char *qtTagText();
 
     QString deviceName();
+    bool blockEventLoopsWhenSuspended();
 }
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/androidjnimenu.cpp b/src/plugins/platforms/android/androidjnimenu.cpp
index 6a979b9255..ecd6fcce72 100644
--- a/src/plugins/platforms/android/androidjnimenu.cpp
+++ b/src/plugins/platforms/android/androidjnimenu.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,9 +38,12 @@
 #include "qandroidplatformmenuitem.h"
 
 #include <QMutex>
-#include <QSet>
+#include <QPoint>
 #include <QQueue>
+#include <QRect>
+#include <QSet>
 #include <QWindow>
+#include <QtCore/private/qjnihelpers_p.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -56,7 +51,7 @@ using namespace QtAndroid;
 
 namespace QtAndroidMenu
 {
-    static QQueue<QAndroidPlatformMenu *> pendingContextMenus;
+    static QList<QAndroidPlatformMenu *> pendingContextMenus;
     static QAndroidPlatformMenu *visibleMenu = 0;
     static QMutex visibleMenuMutex(QMutex::Recursive);
 
@@ -68,6 +63,7 @@ namespace QtAndroidMenu
     static jmethodID openContextMenuMethodID = 0;
     static jmethodID closeContextMenuMethodID = 0;
     static jmethodID resetOptionsMenuMethodID = 0;
+    static jmethodID openOptionsMenuMethodID = 0;
 
     static jmethodID clearMenuMethodID = 0;
     static jmethodID addMenuItemMethodID = 0;
@@ -87,21 +83,32 @@ namespace QtAndroidMenu
             env.jniEnv->CallStaticVoidMethod(applicationClass(), resetOptionsMenuMethodID);
     }
 
-    void showContextMenu(QAndroidPlatformMenu *menu, JNIEnv *env)
+    void openOptionsMenu()
+    {
+        AttachedJNIEnv env;
+        if (env.jniEnv)
+            env.jniEnv->CallStaticVoidMethod(applicationClass(), openOptionsMenuMethodID);
+    }
+
+    void showContextMenu(QAndroidPlatformMenu *menu, const QRect &anchorRect, JNIEnv *env)
     {
         QMutexLocker lock(&visibleMenuMutex);
-        if (visibleMenu) {
-            pendingContextMenus.enqueue(menu);
+        if (QtAndroidPrivate::androidSdkVersion() > 10 &&
+                QtAndroidPrivate::androidSdkVersion() < 14 &&
+                anchorRect.isValid()) {
+            pendingContextMenus.clear();
+        } else if (visibleMenu) {
+            pendingContextMenus.append(visibleMenu);
+        }
+
+        visibleMenu = menu;
+        menu->aboutToShow();
+        if (env) {
+            env->CallStaticVoidMethod(applicationClass(), openContextMenuMethodID, anchorRect.x(), anchorRect.y(), anchorRect.width(), anchorRect.height());
         } else {
-            visibleMenu = menu;
-            menu->aboutToShow();
-            if (env) {
-                env->CallStaticVoidMethod(applicationClass(), openContextMenuMethodID);
-            } else {
-                AttachedJNIEnv aenv;
-                if (aenv.jniEnv)
-                    aenv.jniEnv->CallStaticVoidMethod(applicationClass(), openContextMenuMethodID);
-            }
+            AttachedJNIEnv aenv;
+            if (aenv.jniEnv)
+                aenv.jniEnv->CallStaticVoidMethod(applicationClass(), openContextMenuMethodID, anchorRect.x(), anchorRect.y(), anchorRect.width(), anchorRect.height());
         }
     }
 
@@ -111,7 +118,8 @@ namespace QtAndroidMenu
         if (visibleMenu == menu) {
             AttachedJNIEnv env;
             if (env.jniEnv)
-                env.jniEnv->CallStaticVoidMethod(applicationClass(), openContextMenuMethodID);
+                env.jniEnv->CallStaticVoidMethod(applicationClass(), closeContextMenuMethodID);
+            pendingContextMenus.clear();
         } else {
             pendingContextMenus.removeOne(menu);
         }
@@ -298,7 +306,7 @@ namespace QtAndroidMenu
             QAndroidPlatformMenuItem *item = static_cast<QAndroidPlatformMenuItem *>(menus.front()->menuItemForTag(menuId));
             if (item) {
                 if (item->menu()) {
-                    showContextMenu(item->menu(), env);
+                    showContextMenu(item->menu(), QRect(), env);
                 } else {
                     if (item->isCheckable())
                         item->setChecked(checked);
@@ -308,7 +316,7 @@ namespace QtAndroidMenu
         } else {
             QAndroidPlatformMenu *menu = static_cast<QAndroidPlatformMenu *>(visibleMenuBar->menuForTag(menuId));
             if (menu)
-                showContextMenu(menu, env);
+                showContextMenu(menu, QRect(), env);
         }
 
         return JNI_TRUE;
@@ -333,17 +341,30 @@ namespace QtAndroidMenu
         addAllMenuItemsToMenu(env, menu, visibleMenu);
     }
 
+    static void fillContextMenu(JNIEnv *env, jobject /*thiz*/, jobject menu)
+    {
+        env->CallVoidMethod(menu, clearMenuMethodID);
+        QMutexLocker lock(&visibleMenuMutex);
+        if (!visibleMenu)
+            return;
+
+        addAllMenuItemsToMenu(env, menu, visibleMenu);
+    }
+
     static jboolean onContextItemSelected(JNIEnv *env, jobject /*thiz*/, jint menuId, jboolean checked)
     {
         QMutexLocker lock(&visibleMenuMutex);
         QAndroidPlatformMenuItem * item = static_cast<QAndroidPlatformMenuItem *>(visibleMenu->menuItemForTag(menuId));
         if (item) {
             if (item->menu()) {
-                showContextMenu(item->menu(), env);
+                showContextMenu(item->menu(), QRect(), env);
             } else {
                 if (item->isCheckable())
                     item->setChecked(checked);
                 item->activated();
+                visibleMenu->aboutToHide();
+                visibleMenu = 0;
+                pendingContextMenus.clear();
             }
         }
         return JNI_TRUE;
@@ -354,10 +375,11 @@ namespace QtAndroidMenu
         QMutexLocker lock(&visibleMenuMutex);
         if (!visibleMenu)
             return;
+
         visibleMenu->aboutToHide();
         visibleMenu = 0;
         if (!pendingContextMenus.empty())
-            showContextMenu(pendingContextMenus.dequeue(), env);
+            showContextMenu(pendingContextMenus.takeLast(), QRect(), env);
     }
 
     static JNINativeMethod methods[] = {
@@ -365,6 +387,7 @@ namespace QtAndroidMenu
         {"onOptionsItemSelected", "(IZ)Z", (void *)onOptionsItemSelected},
         {"onOptionsMenuClosed", "(Landroid/view/Menu;)V", (void*)onOptionsMenuClosed},
         {"onCreateContextMenu", "(Landroid/view/ContextMenu;)V", (void *)onCreateContextMenu},
+        {"fillContextMenu", "(Landroid/view/Menu;)V", (void *)fillContextMenu},
         {"onContextItemSelected", "(IZ)Z", (void *)onContextItemSelected},
         {"onContextMenuClosed", "(Landroid/view/Menu;)V", (void*)onContextMenuClosed},
     };
@@ -406,9 +429,10 @@ namespace QtAndroidMenu
             return false;
         }
 
-        GET_AND_CHECK_STATIC_METHOD(openContextMenuMethodID, appClass, "openContextMenu", "()V");
+        GET_AND_CHECK_STATIC_METHOD(openContextMenuMethodID, appClass, "openContextMenu", "(IIII)V");
         GET_AND_CHECK_STATIC_METHOD(closeContextMenuMethodID, appClass, "closeContextMenu", "()V");
         GET_AND_CHECK_STATIC_METHOD(resetOptionsMenuMethodID, appClass, "resetOptionsMenu", "()V");
+        GET_AND_CHECK_STATIC_METHOD(openOptionsMenuMethodID, appClass, "openOptionsMenu", "()V");
 
         jclass clazz;
         FIND_AND_CHECK_CLASS("android/view/Menu");
diff --git a/src/plugins/platforms/android/androidjnimenu.h b/src/plugins/platforms/android/androidjnimenu.h
index 2ae406901a..c54eb37f37 100644
--- a/src/plugins/platforms/android/androidjnimenu.h
+++ b/src/plugins/platforms/android/androidjnimenu.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,11 +43,14 @@ class QAndroidPlatformMenuBar;
 class QAndroidPlatformMenu;
 class QAndroidPlatformMenuItem;
 class QWindow;
+class QRect;
+class QPoint;
 
 namespace QtAndroidMenu
 {
     // Menu support
-    void showContextMenu(QAndroidPlatformMenu *menu, JNIEnv *env = 0);
+    void openOptionsMenu();
+    void showContextMenu(QAndroidPlatformMenu *menu, const QRect &anchorRect, JNIEnv *env = 0);
     void hideContextMenu(QAndroidPlatformMenu *menu);
     void syncMenu(QAndroidPlatformMenu *menu);
     void androidPlatformMenuDestroyed(QAndroidPlatformMenu *menu);
diff --git a/src/plugins/platforms/android/androidplatformplugin.cpp b/src/plugins/platforms/android/androidplatformplugin.cpp
index 2cf5aa1e01..8227452098 100644
--- a/src/plugins/platforms/android/androidplatformplugin.cpp
+++ b/src/plugins/platforms/android/androidplatformplugin.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/androidsurfaceclient.h b/src/plugins/platforms/android/androidsurfaceclient.h
index 94f16a8547..440f68561b 100644
--- a/src/plugins/platforms/android/androidsurfaceclient.h
+++ b/src/plugins/platforms/android/androidsurfaceclient.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/extract-dummy.cpp b/src/plugins/platforms/android/extract-dummy.cpp
new file mode 100644
index 0000000000..86ac554531
--- /dev/null
+++ b/src/plugins/platforms/android/extract-dummy.cpp
@@ -0,0 +1,55 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <jni.h>
+#include <extract.h>
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractNativeChunkInfo(JNIEnv *, jobject, Res_png_9patch*)
+{
+    return 0;
+}
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractChunkInfo(JNIEnv *, jobject, jbyteArray)
+{
+        return 0;
+}
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractNativeChunkInfo20(JNIEnv *, jobject, long)
+{
+    return 0;
+}
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractChunkInfo20(JNIEnv *, jobject, jbyteArray)
+{
+    return 0;
+}
diff --git a/src/plugins/platforms/android/extract.cpp b/src/plugins/platforms/android/extract.cpp
new file mode 100644
index 0000000000..15a48d2601
--- /dev/null
+++ b/src/plugins/platforms/android/extract.cpp
@@ -0,0 +1,180 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL3$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 3 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPLv3 included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 3 requirements
+** will be met: https://www.gnu.org/licenses/lgpl.html.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+
+#include <jni.h>
+#include <android/log.h>
+#include <extract.h>
+#include <alloca.h>
+
+#define LOG_TAG    "extractSyleInfo"
+#define LOGE(...)  __android_log_print(ANDROID_LOG_ERROR,LOG_TAG,__VA_ARGS__)
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractNativeChunkInfo(JNIEnv * env, jobject, Res_png_9patch* chunk)
+{
+        Res_png_9patch::deserialize(chunk);
+        //printChunkInformation(chunk);
+        jintArray result;
+        size_t size = 3+chunk->numXDivs+chunk->numYDivs+chunk->numColors;
+        result = env->NewIntArray(size);
+        if (!result)
+            return 0;
+
+        jint *data = (jint*)malloc(sizeof(jint)*size);
+        size_t pos = 0;
+        data[pos++]=chunk->numXDivs;
+        data[pos++]=chunk->numYDivs;
+        data[pos++]=chunk->numColors;
+        for (int x = 0; x <chunk->numXDivs; x ++)
+            data[pos++]=chunk->xDivs[x];
+        for (int y = 0; y <chunk->numYDivs; y ++)
+            data[pos++]=chunk->yDivs[y];
+        for (int c = 0; c <chunk->numColors; c ++)
+            data[pos++]=chunk->colors[c];
+        env->SetIntArrayRegion(result, 0, size, data);
+        free(data);
+        return result;
+}
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractChunkInfo(JNIEnv * env, jobject  obj, jbyteArray chunkObj)
+{
+        size_t chunkSize = env->GetArrayLength(chunkObj);
+        void* storage = alloca(chunkSize);
+        env->GetByteArrayRegion(chunkObj, 0, chunkSize,
+                                reinterpret_cast<jbyte*>(storage));
+
+        if (!env->ExceptionCheck())
+            return Java_org_qtproject_qt5_android_ExtractStyle_extractNativeChunkInfo(env, obj, static_cast<Res_png_9patch*>(storage));
+        else
+            env->ExceptionClear();
+        return 0;
+}
+
+// The following part was shamelessly stolen from ResourceTypes.cpp from Android's sources
+/*
+ * Copyright (C) 2005 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+static void deserializeInternal(const void* inData, Res_png_9patch* outData) {
+    char* patch = (char*) inData;
+    if (inData != outData) {
+        memmove(&outData->wasDeserialized, patch, 4);     // copy  wasDeserialized, numXDivs, numYDivs, numColors
+        memmove(&outData->paddingLeft, patch + 12, 4);     // copy  wasDeserialized, numXDivs, numYDivs, numColors
+    }
+    outData->wasDeserialized = true;
+    char* data = (char*)outData;
+    data +=  sizeof(Res_png_9patch);
+    outData->xDivs = (int32_t*) data;
+    data +=  outData->numXDivs * sizeof(int32_t);
+    outData->yDivs = (int32_t*) data;
+    data +=  outData->numYDivs * sizeof(int32_t);
+    outData->colors = (uint32_t*) data;
+}
+
+Res_png_9patch* Res_png_9patch::deserialize(const void* inData)
+{
+    if (sizeof(void*) != sizeof(int32_t)) {
+        LOGE("Cannot deserialize on non 32-bit system\n");
+        return NULL;
+    }
+    deserializeInternal(inData, (Res_png_9patch*) inData);
+    return (Res_png_9patch*) inData;
+}
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractNativeChunkInfo20(JNIEnv * env, jobject, long addr)
+{
+    Res_png_9patch20* chunk = reinterpret_cast<Res_png_9patch20*>(addr);
+    Res_png_9patch20::deserialize(chunk);
+    //printChunkInformation(chunk);
+    jintArray result;
+    size_t size = 3+chunk->numXDivs+chunk->numYDivs+chunk->numColors;
+    result = env->NewIntArray(size);
+    if (!result)
+        return 0;
+
+    jint *data = (jint*)malloc(sizeof(jint)*size);
+    size_t pos = 0;
+    data[pos++] = chunk->numXDivs;
+    data[pos++] = chunk->numYDivs;
+    data[pos++] = chunk->numColors;
+
+    int32_t* xDivs = chunk->getXDivs();
+    int32_t* yDivs = chunk->getYDivs();
+    uint32_t* colors = chunk->getColors();
+
+    for (int x = 0; x <chunk->numXDivs; x ++)
+        data[pos++]=xDivs[x];
+    for (int y = 0; y <chunk->numYDivs; y ++)
+        data[pos++] = yDivs[y];
+    for (int c = 0; c <chunk->numColors; c ++)
+        data[pos++] = colors[c];
+    env->SetIntArrayRegion(result, 0, size, data);
+    free(data);
+    return result;
+}
+
+extern "C" JNIEXPORT jintArray JNICALL Java_org_qtproject_qt5_android_ExtractStyle_extractChunkInfo20(JNIEnv * env, jobject  obj, jbyteArray chunkObj)
+{
+    size_t chunkSize = env->GetArrayLength(chunkObj);
+    void* storage = alloca(chunkSize);
+    env->GetByteArrayRegion(chunkObj, 0, chunkSize,
+                            reinterpret_cast<jbyte*>(storage));
+
+    if (!env->ExceptionCheck())
+        return Java_org_qtproject_qt5_android_ExtractStyle_extractNativeChunkInfo20(env, obj, long(storage));
+    else
+        env->ExceptionClear();
+    return 0;
+}
+
+static inline void fill9patchOffsets(Res_png_9patch20* patch) {
+    patch->xDivsOffset = sizeof(Res_png_9patch20);
+    patch->yDivsOffset = patch->xDivsOffset + (patch->numXDivs * sizeof(int32_t));
+    patch->colorsOffset = patch->yDivsOffset + (patch->numYDivs * sizeof(int32_t));
+}
+
+Res_png_9patch20* Res_png_9patch20::deserialize(void* inData)
+{
+    Res_png_9patch20* patch = reinterpret_cast<Res_png_9patch20*>(inData);
+    patch->wasDeserialized = true;
+    fill9patchOffsets(patch);
+    return patch;
+}
diff --git a/src/plugins/platforms/android/qandroidassetsfileenginehandler.cpp b/src/plugins/platforms/android/qandroidassetsfileenginehandler.cpp
index 70ea3d756f..06303cdd10 100644
--- a/src/plugins/platforms/android/qandroidassetsfileenginehandler.cpp
+++ b/src/plugins/platforms/android/qandroidassetsfileenginehandler.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidassetsfileenginehandler.h b/src/plugins/platforms/android/qandroidassetsfileenginehandler.h
index a48a288ebc..a27d31279c 100644
--- a/src/plugins/platforms/android/qandroidassetsfileenginehandler.h
+++ b/src/plugins/platforms/android/qandroidassetsfileenginehandler.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroideventdispatcher.cpp b/src/plugins/platforms/android/qandroideventdispatcher.cpp
new file mode 100644
index 0000000000..2ba1399c6a
--- /dev/null
+++ b/src/plugins/platforms/android/qandroideventdispatcher.cpp
@@ -0,0 +1,146 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qandroideventdispatcher.h"
+#include "androidjnimain.h"
+
+QAndroidEventDispatcher::QAndroidEventDispatcher(QObject *parent) :
+    QUnixEventDispatcherQPA(parent)
+{
+    if (QtAndroid::blockEventLoopsWhenSuspended())
+        QAndroidEventDispatcherStopper::instance()->addEventDispatcher(this);
+}
+
+QAndroidEventDispatcher::~QAndroidEventDispatcher()
+{
+    if (QtAndroid::blockEventLoopsWhenSuspended())
+        QAndroidEventDispatcherStopper::instance()->removeEventDispatcher(this);
+}
+
+enum States {Running = 0, StopRequest = 1, Stopping = 2};
+
+void QAndroidEventDispatcher::start()
+{
+    int prevState = m_stopRequest.fetchAndStoreAcquire(Running);
+    if (prevState == Stopping) {
+        m_semaphore.release();
+        wakeUp();
+    } else if (prevState == Running) {
+        qWarning("Error: start without corresponding stop");
+    }
+    //else if prevState == StopRequest, no action needed
+}
+
+void QAndroidEventDispatcher::stop()
+{
+    if (m_stopRequest.testAndSetAcquire(Running, StopRequest))
+        wakeUp();
+    else
+        qWarning("Error: start/stop out of sync");
+}
+
+void QAndroidEventDispatcher::goingToStop(bool stop)
+{
+    m_goingToStop.store(stop ? 1 : 0);
+    if (!stop)
+        wakeUp();
+}
+
+int QAndroidEventDispatcher::select(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, timespec *timeout)
+{
+    if (m_stopRequest.testAndSetAcquire(StopRequest, Stopping)) {
+        m_semaphore.acquire();
+        wakeUp();
+    }
+
+    return QUnixEventDispatcherQPA::select(nfds, readfds, writefds, exceptfds, timeout);
+}
+
+bool QAndroidEventDispatcher::processEvents(QEventLoop::ProcessEventsFlags flags)
+{
+    if (m_goingToStop.load()) {
+        return QUnixEventDispatcherQPA::processEvents(flags /*| QEventLoop::ExcludeUserInputEvents*/
+                                                      | QEventLoop::ExcludeSocketNotifiers
+                                                      | QEventLoop::X11ExcludeTimers);
+    } else {
+        return QUnixEventDispatcherQPA::processEvents(flags);
+    }
+}
+
+
+QAndroidEventDispatcherStopper *QAndroidEventDispatcherStopper::instance()
+{
+    static QAndroidEventDispatcherStopper androidEventDispatcherStopper;
+    return &androidEventDispatcherStopper;
+}
+
+void QAndroidEventDispatcherStopper::startAll()
+{
+    QMutexLocker lock(&m_mutex);
+    if (started)
+        return;
+
+    started = true;
+    foreach (QAndroidEventDispatcher *d, m_dispatchers)
+        d->start();
+}
+
+void QAndroidEventDispatcherStopper::stopAll()
+{
+    QMutexLocker lock(&m_mutex);
+    if (!started)
+        return;
+
+    started = false;
+    foreach (QAndroidEventDispatcher *d, m_dispatchers)
+        d->stop();
+}
+
+void QAndroidEventDispatcherStopper::addEventDispatcher(QAndroidEventDispatcher *dispatcher)
+{
+    QMutexLocker lock(&m_mutex);
+    m_dispatchers.push_back(dispatcher);
+}
+
+void QAndroidEventDispatcherStopper::removeEventDispatcher(QAndroidEventDispatcher *dispatcher)
+{
+    QMutexLocker lock(&m_mutex);
+    m_dispatchers.erase(std::find(m_dispatchers.begin(), m_dispatchers.end(), dispatcher));
+}
+
+void QAndroidEventDispatcherStopper::goingToStop(bool stop)
+{
+    QMutexLocker lock(&m_mutex);
+    foreach (QAndroidEventDispatcher *d, m_dispatchers)
+        d->goingToStop(stop);
+}
diff --git a/src/plugins/platforms/android/qandroideventdispatcher.h b/src/plugins/platforms/android/qandroideventdispatcher.h
new file mode 100644
index 0000000000..8327c90cbc
--- /dev/null
+++ b/src/plugins/platforms/android/qandroideventdispatcher.h
@@ -0,0 +1,82 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QANDROIDEVENTDISPATCHER_H
+#define QANDROIDEVENTDISPATCHER_H
+
+#include <QtCore/QMutex>
+#include <QtCore/QSemaphore>
+#include <QtPlatformSupport/private/qunixeventdispatcher_qpa_p.h>
+
+class QAndroidEventDispatcher : public QUnixEventDispatcherQPA
+{
+    Q_OBJECT
+public:
+    explicit QAndroidEventDispatcher(QObject *parent = 0);
+    ~QAndroidEventDispatcher();
+    void start();
+    void stop();
+
+    void goingToStop(bool stop);
+
+protected:
+    int select(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds,
+               timespec *timeout);
+
+    bool processEvents(QEventLoop::ProcessEventsFlags flags);
+
+private:
+    QAtomicInt m_stopRequest;
+    QAtomicInt m_goingToStop;
+    QSemaphore m_semaphore;
+};
+
+class QAndroidEventDispatcherStopper
+{
+public:
+    static QAndroidEventDispatcherStopper *instance();
+    static bool stopped() {return !instance()->started; }
+    void startAll();
+    void stopAll();
+    void addEventDispatcher(QAndroidEventDispatcher *dispatcher);
+    void removeEventDispatcher(QAndroidEventDispatcher *dispatcher);
+    void goingToStop(bool stop);
+
+private:
+    QMutex m_mutex;
+    bool started = true;
+    QVector<QAndroidEventDispatcher *> m_dispatchers;
+};
+
+
+#endif // QANDROIDEVENTDISPATCHER_H
diff --git a/src/plugins/platforms/android/qandroidinputcontext.cpp b/src/plugins/platforms/android/qandroidinputcontext.cpp
index acd7a42ba2..a23d05520c 100644
--- a/src/plugins/platforms/android/qandroidinputcontext.cpp
+++ b/src/plugins/platforms/android/qandroidinputcontext.cpp
@@ -6,36 +6,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,6 +37,7 @@
 #include "qandroidinputcontext.h"
 #include "androidjnimain.h"
 #include "androidjniinput.h"
+#include "qandroideventdispatcher.h"
 #include <QDebug>
 #include <qevent.h>
 #include <qguiapplication.h>
@@ -52,6 +45,7 @@
 #include <qthread.h>
 #include <qinputmethod.h>
 #include <qwindow.h>
+#include <QtCore/private/qjni_p.h>
 
 #include <QTextCharFormat>
 
@@ -60,8 +54,8 @@
 QT_BEGIN_NAMESPACE
 
 static QAndroidInputContext *m_androidInputContext = 0;
-static char const *const QtNativeInputConnectionClassName = "org.qtproject.qt5.android.QtNativeInputConnection";
-static char const *const QtExtractedTextClassName = "org.qtproject.qt5.android.QtExtractedText";
+static char const *const QtNativeInputConnectionClassName = "org/qtproject/qt5/android/QtNativeInputConnection";
+static char const *const QtExtractedTextClassName = "org/qtproject/qt5/android/QtExtractedText";
 static jclass m_extractedTextClass = 0;
 static jmethodID m_classConstructorMethodID = 0;
 static jfieldID m_partialEndOffsetFieldID = 0;
@@ -341,11 +335,7 @@ static JNINativeMethod methods[] = {
 QAndroidInputContext::QAndroidInputContext()
     : QPlatformInputContext(), m_composingTextStart(-1), m_blockUpdateSelection(false),  m_batchEditNestingLevel(0), m_focusObject(0)
 {
-    QtAndroid::AttachedJNIEnv env;
-    if (!env.jniEnv)
-        return;
-
-    jclass clazz = QtAndroid::findClass(QtNativeInputConnectionClassName, env.jniEnv);
+    jclass clazz = QJNIEnvironmentPrivate::findClass(QtNativeInputConnectionClassName);
     if (clazz == NULL) {
         qCritical() << "Native registration unable to find class '"
                     << QtNativeInputConnectionClassName
@@ -353,14 +343,15 @@ QAndroidInputContext::QAndroidInputContext()
         return;
     }
 
-    if (env.jniEnv->RegisterNatives(clazz, methods, sizeof(methods) / sizeof(methods[0])) < 0) {
+    QJNIEnvironmentPrivate env;
+    if (env->RegisterNatives(clazz, methods, sizeof(methods) / sizeof(methods[0])) < 0) {
         qCritical() << "RegisterNatives failed for '"
                     << QtNativeInputConnectionClassName
                     << "'";
         return;
     }
 
-    clazz = QtAndroid::findClass(QtExtractedTextClassName, env.jniEnv);
+    clazz = QJNIEnvironmentPrivate::findClass(QtExtractedTextClassName);
     if (clazz == NULL) {
         qCritical() << "Native registration unable to find class '"
                     << QtExtractedTextClassName
@@ -368,44 +359,44 @@ QAndroidInputContext::QAndroidInputContext()
         return;
     }
 
-    m_extractedTextClass = static_cast<jclass>(env.jniEnv->NewGlobalRef(clazz));
-    m_classConstructorMethodID = env.jniEnv->GetMethodID(m_extractedTextClass, "<init>", "()V");
+    m_extractedTextClass = static_cast<jclass>(env->NewGlobalRef(clazz));
+    m_classConstructorMethodID = env->GetMethodID(m_extractedTextClass, "<init>", "()V");
     if (m_classConstructorMethodID == NULL) {
         qCritical() << "GetMethodID failed";
         return;
     }
 
-    m_partialEndOffsetFieldID = env.jniEnv->GetFieldID(m_extractedTextClass, "partialEndOffset", "I");
+    m_partialEndOffsetFieldID = env->GetFieldID(m_extractedTextClass, "partialEndOffset", "I");
     if (m_partialEndOffsetFieldID == NULL) {
         qCritical() << "Can't find field partialEndOffset";
         return;
     }
 
-    m_partialStartOffsetFieldID = env.jniEnv->GetFieldID(m_extractedTextClass, "partialStartOffset", "I");
+    m_partialStartOffsetFieldID = env->GetFieldID(m_extractedTextClass, "partialStartOffset", "I");
     if (m_partialStartOffsetFieldID == NULL) {
         qCritical() << "Can't find field partialStartOffset";
         return;
     }
 
-    m_selectionEndFieldID = env.jniEnv->GetFieldID(m_extractedTextClass, "selectionEnd", "I");
+    m_selectionEndFieldID = env->GetFieldID(m_extractedTextClass, "selectionEnd", "I");
     if (m_selectionEndFieldID == NULL) {
         qCritical() << "Can't find field selectionEnd";
         return;
     }
 
-    m_selectionStartFieldID = env.jniEnv->GetFieldID(m_extractedTextClass, "selectionStart", "I");
+    m_selectionStartFieldID = env->GetFieldID(m_extractedTextClass, "selectionStart", "I");
     if (m_selectionStartFieldID == NULL) {
         qCritical() << "Can't find field selectionStart";
         return;
     }
 
-    m_startOffsetFieldID = env.jniEnv->GetFieldID(m_extractedTextClass, "startOffset", "I");
+    m_startOffsetFieldID = env->GetFieldID(m_extractedTextClass, "startOffset", "I");
     if (m_startOffsetFieldID == NULL) {
         qCritical() << "Can't find field startOffset";
         return;
     }
 
-    m_textFieldID = env.jniEnv->GetFieldID(m_extractedTextClass, "text", "Ljava/lang/String;");
+    m_textFieldID = env->GetFieldID(m_extractedTextClass, "text", "Ljava/lang/String;");
     if (m_textFieldID == NULL) {
         qCritical() << "Can't find field text";
         return;
@@ -450,10 +441,14 @@ void QAndroidInputContext::reset()
 {
     clear();
     m_batchEditNestingLevel = 0;
-    if (qGuiApp->focusObject())
-        QtAndroidInput::resetSoftwareKeyboard();
-    else
-        QtAndroidInput::hideSoftwareKeyboard();
+    if (qGuiApp->focusObject()) {
+        QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe(Qt::ImEnabled);
+        if (!query.isNull() && query->value(Qt::ImEnabled).toBool()) {
+            QtAndroidInput::resetSoftwareKeyboard();
+            return;
+        }
+    }
+    QtAndroidInput::hideSoftwareKeyboard();
 }
 
 void QAndroidInputContext::commit()
@@ -463,7 +458,7 @@ void QAndroidInputContext::commit()
 
 void QAndroidInputContext::updateCursorPosition()
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (!query.isNull() && !m_blockUpdateSelection && !m_batchEditNestingLevel) {
         const int cursorPos = getAbsoluteCursorPosition(query);
         const int composeLength = m_composingText.length();
@@ -496,7 +491,7 @@ void QAndroidInputContext::updateCursorPosition()
 
 void QAndroidInputContext::update(Qt::InputMethodQueries queries)
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery(queries);
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe(queries);
     if (query.isNull())
         return;
 #warning TODO extract the needed data from query
@@ -524,7 +519,7 @@ bool QAndroidInputContext::isAnimating() const
 
 void QAndroidInputContext::showInputPanel()
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return;
 
@@ -580,16 +575,6 @@ void QAndroidInputContext::setFocusObject(QObject *object)
     QPlatformInputContext::setFocusObject(object);
 }
 
-void QAndroidInputContext::sendEvent(QObject *receiver, QInputMethodEvent *event)
-{
-    QCoreApplication::sendEvent(receiver, event);
-}
-
-void QAndroidInputContext::sendEvent(QObject *receiver, QInputMethodQueryEvent *event)
-{
-    QCoreApplication::sendEvent(receiver, event);
-}
-
 jboolean QAndroidInputContext::beginBatchEdit()
 {
     ++m_batchEditNestingLevel;
@@ -615,12 +600,12 @@ jboolean QAndroidInputContext::commitText(const QString &text, jint newCursorPos
 {
     QInputMethodEvent event;
     event.setCommitString(text);
-    sendInputMethodEvent(&event);
+    sendInputMethodEventThreadSafe(&event);
     clear();
 
     // Qt has now put the cursor at the end of the text, corresponding to newCursorPosition == 1
     if (newCursorPosition != 1) {
-        QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+        QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
         if (!query.isNull()) {
             QList<QInputMethodEvent::Attribute> attributes;
             const int localPos = query->value(Qt::ImCursorPosition).toInt();
@@ -639,7 +624,7 @@ jboolean QAndroidInputContext::commitText(const QString &text, jint newCursorPos
 
 jboolean QAndroidInputContext::deleteSurroundingText(jint leftLength, jint rightLength)
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return JNI_TRUE;
 
@@ -648,7 +633,7 @@ jboolean QAndroidInputContext::deleteSurroundingText(jint leftLength, jint right
 
     QInputMethodEvent event;
     event.setCommitString(QString(), -leftLength, leftLength+rightLength);
-    sendInputMethodEvent(&event);
+    sendInputMethodEventThreadSafe(&event);
     clear();
 
     return JNI_TRUE;
@@ -657,7 +642,7 @@ jboolean QAndroidInputContext::deleteSurroundingText(jint leftLength, jint right
 // Android docs say the cursor must not move
 jboolean QAndroidInputContext::finishComposingText()
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return JNI_FALSE;
 
@@ -673,7 +658,7 @@ jboolean QAndroidInputContext::finishComposingText()
 
     QInputMethodEvent event(QString(), attributes);
     event.setCommitString(m_composingText);
-    sendInputMethodEvent(&event);
+    sendInputMethodEventThreadSafe(&event);
     clear();
 
     return JNI_TRUE;
@@ -682,7 +667,7 @@ jboolean QAndroidInputContext::finishComposingText()
 jint QAndroidInputContext::getCursorCapsMode(jint /*reqModes*/)
 {
     jint res = 0;
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return res;
 
@@ -705,7 +690,7 @@ const QAndroidInputContext::ExtractedText &QAndroidInputContext::getExtractedTex
     // updateExtractedText(View, int, ExtractedText) whenever you call
     // updateSelection(View, int, int, int, int)."  QTBUG-37980
 
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return m_extractedText;
 
@@ -750,7 +735,7 @@ const QAndroidInputContext::ExtractedText &QAndroidInputContext::getExtractedTex
 
 QString QAndroidInputContext::getSelectedText(jint /*flags*/)
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return QString();
 
@@ -766,7 +751,7 @@ QString QAndroidInputContext::getTextAfterCursor(jint length, jint /*flags*/)
     }
 
     //compatibility code for old controls that do not implement the new API
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return QString();
 
@@ -786,7 +771,7 @@ QString QAndroidInputContext::getTextBeforeCursor(jint length, jint /*flags*/)
     }
 
     //compatibility code for old controls that do not implement the new API
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return QString();
 
@@ -812,7 +797,7 @@ QString QAndroidInputContext::getTextBeforeCursor(jint length, jint /*flags*/)
 
 jboolean QAndroidInputContext::setComposingText(const QString &text, jint newCursorPosition)
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return JNI_FALSE;
 
@@ -835,7 +820,7 @@ jboolean QAndroidInputContext::setComposingText(const QString &text, jint newCur
                                                    QVariant(underlined)));
 
     QInputMethodEvent event(m_composingText, attributes);
-    sendInputMethodEvent(&event);
+    sendInputMethodEventThreadSafe(&event);
 
     updateCursorPosition();
 
@@ -857,7 +842,7 @@ jboolean QAndroidInputContext::setComposingRegion(jint start, jint end)
     if (wasComposing)
         finishComposingText();
 
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return JNI_FALSE;
 
@@ -903,7 +888,7 @@ jboolean QAndroidInputContext::setComposingRegion(jint start, jint end)
 
     QInputMethodEvent event(m_composingText, attributes);
     event.setCommitString(QString(), relativeStart, length);
-    sendInputMethodEvent(&event);
+    sendInputMethodEventThreadSafe(&event);
 
     m_blockUpdateSelection = updateSelectionWasBlocked;
 
@@ -920,7 +905,7 @@ jboolean QAndroidInputContext::setComposingRegion(jint start, jint end)
 
 jboolean QAndroidInputContext::setSelection(jint start, jint end)
 {
-    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQuery();
+    QSharedPointer<QInputMethodQueryEvent> query = focusObjectInputMethodQueryThreadSafe();
     if (query.isNull())
         return JNI_FALSE;
 
@@ -952,7 +937,7 @@ jboolean QAndroidInputContext::setSelection(jint start, jint end)
                                                        QVariant()));
     }
     QInputMethodEvent event(m_composingText, attributes);
-    sendInputMethodEvent(&event);
+    sendInputMethodEventThreadSafe(&event);
     updateCursorPosition();
     return JNI_TRUE;
 }
@@ -998,7 +983,9 @@ QVariant QAndroidInputContext::queryFocusObjectThreadSafe(Qt::InputMethodQuery q
     QVariant retval;
     if (!qGuiApp)
         return retval;
-    bool inMainThread = qGuiApp->thread() == QThread::currentThread();
+    const bool inMainThread = qGuiApp->thread() == QThread::currentThread();
+    if (QAndroidEventDispatcherStopper::stopped() && !inMainThread)
+        return retval;
 
     QMetaObject::invokeMethod(this, "queryFocusObjectUnsafe",
                               inMainThread ? Qt::DirectConnection : Qt::BlockingQueuedConnection,
@@ -1009,43 +996,54 @@ QVariant QAndroidInputContext::queryFocusObjectThreadSafe(Qt::InputMethodQuery q
     return retval;
 }
 
-QSharedPointer<QInputMethodQueryEvent> QAndroidInputContext::focusObjectInputMethodQuery(Qt::InputMethodQueries queries)
+QSharedPointer<QInputMethodQueryEvent> QAndroidInputContext::focusObjectInputMethodQueryThreadSafe(Qt::InputMethodQueries queries) {
+    QSharedPointer<QInputMethodQueryEvent> retval;
+    if (!qGuiApp)
+        return QSharedPointer<QInputMethodQueryEvent>();
+    const bool inMainThread = qGuiApp->thread() == QThread::currentThread();
+    if (QAndroidEventDispatcherStopper::stopped() && !inMainThread)
+        return QSharedPointer<QInputMethodQueryEvent>();
+
+    QInputMethodQueryEvent *queryEvent = 0;
+    QMetaObject::invokeMethod(this, "focusObjectInputMethodQueryUnsafe",
+                              inMainThread ? Qt::DirectConnection : Qt::BlockingQueuedConnection,
+                              Q_RETURN_ARG(QInputMethodQueryEvent*, queryEvent),
+                              Q_ARG(Qt::InputMethodQueries, queries));
+
+    return QSharedPointer<QInputMethodQueryEvent>(queryEvent);
+}
+
+QInputMethodQueryEvent *QAndroidInputContext::focusObjectInputMethodQueryUnsafe(Qt::InputMethodQueries queries)
 {
-#warning TODO make qGuiApp->focusObject() thread safe !!!
     QObject *focusObject = qGuiApp->focusObject();
     if (!focusObject)
-        return QSharedPointer<QInputMethodQueryEvent>();
-
-    QSharedPointer<QInputMethodQueryEvent> ret = QSharedPointer<QInputMethodQueryEvent>(new QInputMethodQueryEvent(queries));
-    if (qGuiApp->thread()==QThread::currentThread()) {
-        QCoreApplication::sendEvent(focusObject, ret.data());
-    } else {
-        QMetaObject::invokeMethod(this,
-                                  "sendEvent",
-                                  Qt::BlockingQueuedConnection,
-                                  Q_ARG(QObject*, focusObject),
-                                  Q_ARG(QInputMethodQueryEvent*, ret.data()));
-    }
+        return 0;
 
+    QInputMethodQueryEvent *ret = new QInputMethodQueryEvent(queries);
+    QCoreApplication::sendEvent(focusObject, ret);
     return ret;
 }
 
-void QAndroidInputContext::sendInputMethodEvent(QInputMethodEvent *event)
+void QAndroidInputContext::sendInputMethodEventUnsafe(QInputMethodEvent *event)
 {
-#warning TODO make qGuiApp->focusObject() thread safe !!!
     QObject *focusObject = qGuiApp->focusObject();
     if (!focusObject)
         return;
 
-    if (qGuiApp->thread() == QThread::currentThread()) {
-        QCoreApplication::sendEvent(focusObject, event);
-    } else {
-        QMetaObject::invokeMethod(this,
-                                  "sendEvent",
-                                  Qt::BlockingQueuedConnection,
-                                  Q_ARG(QObject*, focusObject),
-                                  Q_ARG(QInputMethodEvent*, event));
-    }
+    QCoreApplication::sendEvent(focusObject, event);
+}
+
+void QAndroidInputContext::sendInputMethodEventThreadSafe(QInputMethodEvent *event)
+{
+    if (!qGuiApp)
+        return;
+    const bool inMainThread = qGuiApp->thread() == QThread::currentThread();
+    if (QAndroidEventDispatcherStopper::stopped() && !inMainThread)
+        return;
+
+    QMetaObject::invokeMethod(this, "sendInputMethodEventUnsafe",
+                              inMainThread ? Qt::DirectConnection : Qt::BlockingQueuedConnection,
+                              Q_ARG(QInputMethodEvent*, event));
 }
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidinputcontext.h b/src/plugins/platforms/android/qandroidinputcontext.h
index a467e4849e..670a051139 100644
--- a/src/plugins/platforms/android/qandroidinputcontext.h
+++ b/src/plugins/platforms/android/qandroidinputcontext.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -121,16 +113,15 @@ public slots:
     void updateCursorPosition();
 
 private:
-    QSharedPointer<QInputMethodQueryEvent> focusObjectInputMethodQuery(Qt::InputMethodQueries queries = Qt::ImQueryAll);
-    void sendInputMethodEvent(QInputMethodEvent *event);
+    void sendInputMethodEventThreadSafe(QInputMethodEvent *event);
+    Q_INVOKABLE void sendInputMethodEventUnsafe(QInputMethodEvent *event);
+
+    QSharedPointer<QInputMethodQueryEvent> focusObjectInputMethodQueryThreadSafe(Qt::InputMethodQueries queries = Qt::ImQueryAll);
+    Q_INVOKABLE QInputMethodQueryEvent *focusObjectInputMethodQueryUnsafe(Qt::InputMethodQueries queries);
 
     Q_INVOKABLE QVariant queryFocusObjectUnsafe(Qt::InputMethodQuery query, QVariant argument);
     QVariant queryFocusObjectThreadSafe(Qt::InputMethodQuery query, QVariant argument);
 
-private slots:
-    virtual void sendEvent(QObject *receiver, QInputMethodEvent *event);
-    virtual void sendEvent(QObject *receiver, QInputMethodQueryEvent *event);
-
 private:
     ExtractedText m_extractedText;
     QString m_composingText;
diff --git a/src/plugins/platforms/android/qandroidplatformaccessibility.cpp b/src/plugins/platforms/android/qandroidplatformaccessibility.cpp
index 229368345b..56a62039e4 100644
--- a/src/plugins/platforms/android/qandroidplatformaccessibility.cpp
+++ b/src/plugins/platforms/android/qandroidplatformaccessibility.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformaccessibility.h b/src/plugins/platforms/android/qandroidplatformaccessibility.h
index 1b87f11919..0601723372 100644
--- a/src/plugins/platforms/android/qandroidplatformaccessibility.h
+++ b/src/plugins/platforms/android/qandroidplatformaccessibility.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformbackingstore.cpp b/src/plugins/platforms/android/qandroidplatformbackingstore.cpp
index ff49f59076..d89b16ee47 100644
--- a/src/plugins/platforms/android/qandroidplatformbackingstore.cpp
+++ b/src/plugins/platforms/android/qandroidplatformbackingstore.cpp
@@ -1,48 +1,40 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qandroidplatformbackingstore.h"
 #include "qandroidplatformscreen.h"
-#include "qandroidplatformrasterwindow.h"
+#include "qandroidplatformwindow.h"
 #include <qpa/qplatformscreen.h>
 
 QT_BEGIN_NAMESPACE
@@ -66,7 +58,7 @@ void QAndroidPlatformBackingStore::flush(QWindow *window, const QRegion &region,
     if (!m_backingStoreSet)
         setBackingStore(window);
 
-    (static_cast<QAndroidPlatformRasterWindow *>(window->handle()))->repaint(region);
+    (static_cast<QAndroidPlatformWindow *>(window->handle()))->repaint(region);
 }
 
 void QAndroidPlatformBackingStore::resize(const QSize &size, const QRegion &staticContents)
@@ -79,11 +71,11 @@ void QAndroidPlatformBackingStore::resize(const QSize &size, const QRegion &stat
 
 void QAndroidPlatformBackingStore::setBackingStore(QWindow *window)
 {
-    if (window->surfaceType() == QSurface::RasterSurface) {
-        (static_cast<QAndroidPlatformRasterWindow *>(window->handle()))->setBackingStore(this);
+    if (window->surfaceType() == QSurface::RasterSurface || window->surfaceType() == QSurface::RasterGLSurface) {
+        (static_cast<QAndroidPlatformWindow *>(window->handle()))->setBackingStore(this);
         m_backingStoreSet = true;
     } else {
-        qWarning("QAndroidPlatformBackingStore does not support GL windows.");
+        qWarning("QAndroidPlatformBackingStore does not support OpenGL-only windows.");
     }
 }
 
diff --git a/src/plugins/platforms/android/qandroidplatformbackingstore.h b/src/plugins/platforms/android/qandroidplatformbackingstore.h
index 4c24e129c3..540ead68e1 100644
--- a/src/plugins/platforms/android/qandroidplatformbackingstore.h
+++ b/src/plugins/platforms/android/qandroidplatformbackingstore.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,7 +47,7 @@ public:
     virtual QPaintDevice *paintDevice();
     virtual void flush(QWindow *window, const QRegion &region, const QPoint &offset);
     virtual void resize(const QSize &size, const QRegion &staticContents);
-    const QImage image() { return m_image; }
+    QImage toImage() const { return m_image; }
     void setBackingStore(QWindow *window);
 protected:
     QImage m_image;
diff --git a/src/plugins/platforms/android/qandroidplatformclipboard.cpp b/src/plugins/platforms/android/qandroidplatformclipboard.cpp
index 0b5e96fa36..86fd152bff 100644
--- a/src/plugins/platforms/android/qandroidplatformclipboard.cpp
+++ b/src/plugins/platforms/android/qandroidplatformclipboard.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformclipboard.h b/src/plugins/platforms/android/qandroidplatformclipboard.h
index f67355c358..46bfdad661 100644
--- a/src/plugins/platforms/android/qandroidplatformclipboard.h
+++ b/src/plugins/platforms/android/qandroidplatformclipboard.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformdialoghelpers.cpp b/src/plugins/platforms/android/qandroidplatformdialoghelpers.cpp
index 6e4b6d8255..2ea4c90324 100644
--- a/src/plugins/platforms/android/qandroidplatformdialoghelpers.cpp
+++ b/src/plugins/platforms/android/qandroidplatformdialoghelpers.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,6 +44,8 @@ QT_BEGIN_NAMESPACE
 namespace QtAndroidDialogHelpers {
 static jclass g_messageDialogHelperClass = 0;
 
+static const char QtMessageHandlerHelperClassName[] = "org/qtproject/qt5/android/QtMessageDialogHelper";
+
 QAndroidPlatformMessageDialogHelper::QAndroidPlatformMessageDialogHelper()
     :m_buttonId(-1)
     ,m_javaMessageDialog(g_messageDialogHelperClass, "(Landroid/app/Activity;)V", QtAndroid::activity())
@@ -156,10 +150,10 @@ static JNINativeMethod methods[] = {
 
 bool registerNatives(JNIEnv *env)
 {
-    jclass clazz = QtAndroid::findClass("org.qtproject.qt5.android.QtMessageDialogHelper", env);
+    jclass clazz = QJNIEnvironmentPrivate::findClass(QtMessageHandlerHelperClassName, env);
     if (!clazz) {
         __android_log_print(ANDROID_LOG_FATAL, QtAndroid::qtTagText(), QtAndroid::classErrorMsgFmt()
-                            , "org/qtproject/qt5/android/QtMessageDialogHelper");
+                            , QtMessageHandlerHelperClassName);
         return false;
     }
     g_messageDialogHelperClass = static_cast<jclass>(env->NewGlobalRef(clazz));
diff --git a/src/plugins/platforms/android/qandroidplatformdialoghelpers.h b/src/plugins/platforms/android/qandroidplatformdialoghelpers.h
index 7cbe21a9f4..c1ec95a68c 100644
--- a/src/plugins/platforms/android/qandroidplatformdialoghelpers.h
+++ b/src/plugins/platforms/android/qandroidplatformdialoghelpers.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformfontdatabase.cpp b/src/plugins/platforms/android/qandroidplatformfontdatabase.cpp
index 682a49f6d6..2dcc0399c0 100644
--- a/src/plugins/platforms/android/qandroidplatformfontdatabase.cpp
+++ b/src/plugins/platforms/android/qandroidplatformfontdatabase.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformfontdatabase.h b/src/plugins/platforms/android/qandroidplatformfontdatabase.h
index 0e961f8ae8..0cf52c85ce 100644
--- a/src/plugins/platforms/android/qandroidplatformfontdatabase.h
+++ b/src/plugins/platforms/android/qandroidplatformfontdatabase.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformforeignwindow.cpp b/src/plugins/platforms/android/qandroidplatformforeignwindow.cpp
index e6f9acb2c9..31c3614284 100644
--- a/src/plugins/platforms/android/qandroidplatformforeignwindow.cpp
+++ b/src/plugins/platforms/android/qandroidplatformforeignwindow.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,16 +34,17 @@
 #include "qandroidplatformforeignwindow.h"
 #include "androidjnimain.h"
 #include <QtCore/qvariant.h>
+#include <qpa/qwindowsysteminterface.h>
+#include <QtCore/private/qjnihelpers_p.h>
+
+QT_BEGIN_NAMESPACE
 
 QAndroidPlatformForeignWindow::QAndroidPlatformForeignWindow(QWindow *window)
-    : QAndroidPlatformWindow(window)
+    : QAndroidPlatformWindow(window),
+      m_surfaceId(-1)
 {
     const WId wId = window->property("_q_foreignWinId").value<WId>();
-    if (wId) {
-        m_view = reinterpret_cast<jobject>(wId);
-        Q_ASSERT(m_view.isValid());
-        m_surfaceId = QtAndroid::insertNativeView(m_view.object(), geometry());
-    }
+    m_view = reinterpret_cast<jobject>(wId);
 }
 
 QAndroidPlatformForeignWindow::~QAndroidPlatformForeignWindow()
@@ -60,11 +53,84 @@ QAndroidPlatformForeignWindow::~QAndroidPlatformForeignWindow()
         QtAndroid::destroySurface(m_surfaceId);
 }
 
+void QAndroidPlatformForeignWindow::lower()
+{
+    if (m_surfaceId == -1)
+        return;
+
+    QAndroidPlatformWindow::lower();
+    QtAndroid::bringChildToBack(m_surfaceId);
+}
+
+void QAndroidPlatformForeignWindow::raise()
+{
+    if (m_surfaceId == -1)
+        return;
+
+    QAndroidPlatformWindow::raise();
+    QtAndroid::bringChildToFront(m_surfaceId);
+}
+
 void QAndroidPlatformForeignWindow::setGeometry(const QRect &rect)
 {
-    if (rect == geometry())
+    QWindow *parent = window()->parent();
+    QRect newGeometry = rect;
+
+    if (parent != 0)
+        newGeometry.moveTo(parent->mapToGlobal(rect.topLeft()));
+
+    if (newGeometry == geometry())
+        return;
+
+    QAndroidPlatformWindow::setGeometry(newGeometry);
+
+    if (m_surfaceId != -1)
+        QtAndroid::setSurfaceGeometry(m_surfaceId, newGeometry);
+}
+
+void QAndroidPlatformForeignWindow::setVisible(bool visible)
+{
+    if (!m_view.isValid())
+        return;
+
+    QAndroidPlatformWindow::setVisible(visible);
+
+    if (!visible && m_surfaceId != -1) {
+        QtAndroid::destroySurface(m_surfaceId);
+        m_surfaceId = -1;
+    } else if (m_surfaceId == -1) {
+        m_surfaceId = QtAndroid::insertNativeView(m_view.object(), geometry());
+    }
+}
+
+void QAndroidPlatformForeignWindow::applicationStateChanged(Qt::ApplicationState state)
+{
+    if (state <= Qt::ApplicationHidden
+            && QtAndroid::blockEventLoopsWhenSuspended()
+            && m_surfaceId != -1) {
+        QtAndroid::destroySurface(m_surfaceId);
+        m_surfaceId = -1;
+    } else if (m_view.isValid() && m_surfaceId == -1){
+        m_surfaceId = QtAndroid::insertNativeView(m_view.object(), geometry());
+    }
+
+    QAndroidPlatformWindow::applicationStateChanged(state);
+}
+
+void QAndroidPlatformForeignWindow::setParent(const QPlatformWindow *window)
+{
+    QRect newGeometry = geometry();
+
+    if (window != 0)
+        newGeometry.moveTo(window->mapToGlobal(geometry().topLeft()));
+
+    if (newGeometry != geometry())
+        QAndroidPlatformWindow::setGeometry(newGeometry);
+
+    if (m_surfaceId == -1)
         return;
 
-    QAndroidPlatformWindow::setGeometry(rect);
-    QtAndroid::setSurfaceGeometry(m_surfaceId, rect);
+    QtAndroid::setSurfaceGeometry(m_surfaceId, newGeometry);
 }
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidplatformforeignwindow.h b/src/plugins/platforms/android/qandroidplatformforeignwindow.h
index 88c87d0540..df11c78b7c 100644
--- a/src/plugins/platforms/android/qandroidplatformforeignwindow.h
+++ b/src/plugins/platforms/android/qandroidplatformforeignwindow.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,16 +38,25 @@
 #include "qandroidplatformwindow.h"
 #include <QtCore/private/qjni_p.h>
 
+QT_BEGIN_NAMESPACE
+
 class QAndroidPlatformForeignWindow : public QAndroidPlatformWindow
 {
 public:
     explicit QAndroidPlatformForeignWindow(QWindow *window);
     ~QAndroidPlatformForeignWindow();
-    void setGeometry(const QRect &rect);
+    void lower() Q_DECL_OVERRIDE;
+    void raise() Q_DECL_OVERRIDE;
+    void setGeometry(const QRect &rect) Q_DECL_OVERRIDE;
+    void setVisible(bool visible) Q_DECL_OVERRIDE;
+    void applicationStateChanged(Qt::ApplicationState state) Q_DECL_OVERRIDE;
+    void setParent(const QPlatformWindow *window) Q_DECL_OVERRIDE;
 
 private:
+    int m_surfaceId;
     QJNIObjectPrivate m_view;
-    int m_surfaceId = -1;
 };
 
+QT_END_NAMESPACE
+
 #endif // QANDROIDPLATFORMFOREIGNWINDOW_H
diff --git a/src/plugins/platforms/android/qandroidplatformintegration.cpp b/src/plugins/platforms/android/qandroidplatformintegration.cpp
index baf905f6d2..495e80eb09 100644
--- a/src/plugins/platforms/android/qandroidplatformintegration.cpp
+++ b/src/plugins/platforms/android/qandroidplatformintegration.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,15 +39,14 @@
 #include <QThread>
 #include <QOffscreenSurface>
 
-#include <QtPlatformSupport/private/qgenericunixeventdispatcher_p.h>
 #include <QtPlatformSupport/private/qeglpbuffer_p.h>
-
 #include <qpa/qwindowsysteminterface.h>
 #include <qpa/qplatformwindow.h>
 #include <qpa/qplatformoffscreensurface.h>
 
 #include "androidjnimain.h"
 #include "qabstracteventdispatcher.h"
+#include "qandroideventdispatcher.h"
 #include "qandroidplatformbackingstore.h"
 #include "qandroidplatformaccessibility.h"
 #include "qandroidplatformclipboard.h"
@@ -63,7 +54,6 @@
 #include "qandroidplatformfontdatabase.h"
 #include "qandroidplatformopenglcontext.h"
 #include "qandroidplatformopenglwindow.h"
-#include "qandroidplatformrasterwindow.h"
 #include "qandroidplatformscreen.h"
 #include "qandroidplatformservices.h"
 #include "qandroidplatformtheme.h"
@@ -193,6 +183,7 @@ bool QAndroidPlatformIntegration::hasCapability(Capability cap) const
                 return false;
             else
                 return true;
+        case RasterGLSurface: return true;
         default:
             return QPlatformIntegration::hasCapability(cap);
     }
@@ -228,15 +219,13 @@ QPlatformWindow *QAndroidPlatformIntegration::createPlatformWindow(QWindow *wind
 {
     if (window->type() == Qt::ForeignWindow)
         return new QAndroidPlatformForeignWindow(window);
-    else if (window->surfaceType() == QSurface::RasterSurface)
-        return new QAndroidPlatformRasterWindow(window);
     else
         return new QAndroidPlatformOpenGLWindow(window, m_eglDisplay);
 }
 
 QAbstractEventDispatcher *QAndroidPlatformIntegration::createEventDispatcher() const
 {
-    return createUnixEventDispatcher();
+    return new QAndroidEventDispatcher;
 }
 
 QAndroidPlatformIntegration::~QAndroidPlatformIntegration()
diff --git a/src/plugins/platforms/android/qandroidplatformintegration.h b/src/plugins/platforms/android/qandroidplatformintegration.h
index ce31516ace..13c98442e9 100644
--- a/src/plugins/platforms/android/qandroidplatformintegration.h
+++ b/src/plugins/platforms/android/qandroidplatformintegration.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformmenu.cpp b/src/plugins/platforms/android/qandroidplatformmenu.cpp
index b602f85cd9..f3505fac3c 100644
--- a/src/plugins/platforms/android/qandroidplatformmenu.cpp
+++ b/src/plugins/platforms/android/qandroidplatformmenu.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -143,13 +135,12 @@ bool QAndroidPlatformMenu::isVisible() const
     return m_isVisible;
 }
 
-void QAndroidPlatformMenu::showPopup(const QWindow *parentWindow, QPoint pos, const QPlatformMenuItem *item)
+void QAndroidPlatformMenu::showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item)
 {
     Q_UNUSED(parentWindow);
-    Q_UNUSED(pos);
     Q_UNUSED(item);
     setVisible(true);
-    QtAndroidMenu::showContextMenu(this);
+    QtAndroidMenu::showContextMenu(this, targetRect);
 }
 
 QPlatformMenuItem *QAndroidPlatformMenu::menuItemAt(int position) const
diff --git a/src/plugins/platforms/android/qandroidplatformmenu.h b/src/plugins/platforms/android/qandroidplatformmenu.h
index 7858ca36ae..221c7d33f4 100644
--- a/src/plugins/platforms/android/qandroidplatformmenu.h
+++ b/src/plugins/platforms/android/qandroidplatformmenu.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,7 +65,7 @@ public:
     bool isEnabled() const;
     void setVisible(bool visible);
     bool isVisible() const;
-    void showPopup(const QWindow *parentWindow, QPoint pos, const QPlatformMenuItem *item);
+    void showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item);
 
     QPlatformMenuItem *menuItemAt(int position) const;
     QPlatformMenuItem *menuItemForTag(quintptr tag) const;
diff --git a/src/plugins/platforms/android/qandroidplatformmenubar.cpp b/src/plugins/platforms/android/qandroidplatformmenubar.cpp
index 2d457296c5..87ebaa8554 100644
--- a/src/plugins/platforms/android/qandroidplatformmenubar.cpp
+++ b/src/plugins/platforms/android/qandroidplatformmenubar.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformmenubar.h b/src/plugins/platforms/android/qandroidplatformmenubar.h
index 52882b6922..e36bc69ab8 100644
--- a/src/plugins/platforms/android/qandroidplatformmenubar.h
+++ b/src/plugins/platforms/android/qandroidplatformmenubar.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformmenuitem.cpp b/src/plugins/platforms/android/qandroidplatformmenuitem.cpp
index 4e19ec2939..98fcdbeee7 100644
--- a/src/plugins/platforms/android/qandroidplatformmenuitem.cpp
+++ b/src/plugins/platforms/android/qandroidplatformmenuitem.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -181,4 +173,9 @@ bool QAndroidPlatformMenuItem::isEnabled() const
     return m_isEnabled;
 }
 
+void QAndroidPlatformMenuItem::setIconSize(int size)
+{
+    Q_UNUSED(size)
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidplatformmenuitem.h b/src/plugins/platforms/android/qandroidplatformmenuitem.h
index 40c3ab2761..f779ac8382 100644
--- a/src/plugins/platforms/android/qandroidplatformmenuitem.h
+++ b/src/plugins/platforms/android/qandroidplatformmenuitem.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,6 +77,8 @@ public:
     void setEnabled(bool enabled);
     bool isEnabled() const;
 
+    void setIconSize(int size);
+
 private:
     quintptr m_tag;
     QString m_text;
diff --git a/src/plugins/platforms/android/qandroidplatformopenglcontext.cpp b/src/plugins/platforms/android/qandroidplatformopenglcontext.cpp
index dfc43f0fa5..5781f0d7c6 100644
--- a/src/plugins/platforms/android/qandroidplatformopenglcontext.cpp
+++ b/src/plugins/platforms/android/qandroidplatformopenglcontext.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,10 +50,10 @@ QAndroidPlatformOpenGLContext::QAndroidPlatformOpenGLContext(const QSurfaceForma
 
 void QAndroidPlatformOpenGLContext::swapBuffers(QPlatformSurface *surface)
 {
-    QEGLPlatformContext::swapBuffers(surface);
-
     if (surface->surface()->surfaceClass() == QSurface::Window)
         static_cast<QAndroidPlatformOpenGLWindow *>(surface)->checkNativeSurface(eglConfig());
+
+    QEGLPlatformContext::swapBuffers(surface);
 }
 
 bool QAndroidPlatformOpenGLContext::needsFBOReadBackWorkaround()
diff --git a/src/plugins/platforms/android/qandroidplatformopenglcontext.h b/src/plugins/platforms/android/qandroidplatformopenglcontext.h
index b734cb4db9..38fc8a2f76 100644
--- a/src/plugins/platforms/android/qandroidplatformopenglcontext.h
+++ b/src/plugins/platforms/android/qandroidplatformopenglcontext.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformopenglwindow.cpp b/src/plugins/platforms/android/qandroidplatformopenglwindow.cpp
index f0c4a1de2a..8afc35c57a 100644
--- a/src/plugins/platforms/android/qandroidplatformopenglwindow.cpp
+++ b/src/plugins/platforms/android/qandroidplatformopenglwindow.cpp
@@ -1,50 +1,45 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qandroidplatformopenglwindow.h"
 
+#include "qandroidplatformscreen.h"
 #include "androidjnimain.h"
+#include "qandroideventdispatcher.h"
 
 #include <QSurfaceFormat>
+#include <QtGui/private/qwindow_p.h>
 
 #include <qpa/qwindowsysteminterface.h>
 #include <qpa/qplatformscreen.h>
@@ -57,10 +52,6 @@ QT_BEGIN_NAMESPACE
 QAndroidPlatformOpenGLWindow::QAndroidPlatformOpenGLWindow(QWindow *window, EGLDisplay display)
     :QAndroidPlatformWindow(window), m_eglDisplay(display)
 {
-    lockSurface();
-    m_nativeSurfaceId = QtAndroid::createSurface(this, geometry(), bool(window->flags() & Qt::WindowStaysOnTopHint), 32);
-    m_surfaceWaitCondition.wait(&m_surfaceMutex);
-    unlockSurface();
 }
 
 QAndroidPlatformOpenGLWindow::~QAndroidPlatformOpenGLWindow()
@@ -73,30 +64,67 @@ QAndroidPlatformOpenGLWindow::~QAndroidPlatformOpenGLWindow()
     unlockSurface();
 }
 
+void QAndroidPlatformOpenGLWindow::repaint(const QRegion &region)
+{
+    // This is only for real raster top-level windows. Stop in all other cases.
+    if ((window()->surfaceType() == QSurface::RasterGLSurface && qt_window_private(window())->compositing)
+        || window()->surfaceType() == QSurface::OpenGLSurface
+        || QAndroidPlatformWindow::parent())
+        return;
+
+    QRect currentGeometry = geometry();
+
+    QRect dirtyClient = region.boundingRect();
+    QRect dirtyRegion(currentGeometry.left() + dirtyClient.left(),
+                      currentGeometry.top() + dirtyClient.top(),
+                      dirtyClient.width(),
+                      dirtyClient.height());
+    QRect mOldGeometryLocal = m_oldGeometry;
+    m_oldGeometry = currentGeometry;
+    // If this is a move, redraw the previous location
+    if (mOldGeometryLocal != currentGeometry)
+        platformScreen()->setDirty(mOldGeometryLocal);
+    platformScreen()->setDirty(dirtyRegion);
+}
+
 void QAndroidPlatformOpenGLWindow::setGeometry(const QRect &rect)
 {
     if (rect == geometry())
         return;
 
-    QRect oldGeometry = geometry();
+    m_oldGeometry = geometry();
 
     QAndroidPlatformWindow::setGeometry(rect);
-    QtAndroid::setSurfaceGeometry(m_nativeSurfaceId, rect);
+    if (m_nativeSurfaceId != -1)
+        QtAndroid::setSurfaceGeometry(m_nativeSurfaceId, rect);
 
     QRect availableGeometry = screen()->availableGeometry();
-    if (oldGeometry.width() == 0
-            && oldGeometry.height() == 0
+    if (m_oldGeometry.width() == 0
+            && m_oldGeometry.height() == 0
             && rect.width() > 0
             && rect.height() > 0
             && availableGeometry.width() > 0
             && availableGeometry.height() > 0) {
-        QWindowSystemInterface::handleExposeEvent(window(), QRegion(rect));
+        QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), rect.size()));
     }
+
+    if (rect.topLeft() != m_oldGeometry.topLeft())
+        repaint(QRegion(rect));
 }
 
 EGLSurface QAndroidPlatformOpenGLWindow::eglSurface(EGLConfig config)
 {
+    if (QAndroidEventDispatcherStopper::stopped())
+        return m_eglSurface;
+
     QMutexLocker lock(&m_surfaceMutex);
+
+    if (m_nativeSurfaceId == -1) {
+        const bool windowStaysOnTop = bool(window()->flags() & Qt::WindowStaysOnTopHint);
+        m_nativeSurfaceId = QtAndroid::createSurface(this, geometry(), windowStaysOnTop, 32);
+        m_surfaceWaitCondition.wait(&m_surfaceMutex);
+    }
+
     if (m_eglSurface == EGL_NO_SURFACE) {
         m_surfaceMutex.unlock();
         checkNativeSurface(config);
@@ -117,7 +145,21 @@ void QAndroidPlatformOpenGLWindow::checkNativeSurface(EGLConfig config)
     // we've create another surface, the window should be repainted
     QRect availableGeometry = screen()->availableGeometry();
     if (geometry().width() > 0 && geometry().height() > 0 && availableGeometry.width() > 0 && availableGeometry.height() > 0)
-        QWindowSystemInterface::handleExposeEvent(window(), QRegion(geometry()));
+        QWindowSystemInterface::handleExposeEvent(window(), QRegion(QRect(QPoint(), geometry().size())));
+}
+
+void QAndroidPlatformOpenGLWindow::applicationStateChanged(Qt::ApplicationState state)
+{
+    QAndroidPlatformWindow::applicationStateChanged(state);
+    if (state <=  Qt::ApplicationHidden && QtAndroid::blockEventLoopsWhenSuspended()) {
+        lockSurface();
+        if (m_nativeSurfaceId != -1) {
+            QtAndroid::destroySurface(m_nativeSurfaceId);
+            m_nativeSurfaceId = -1;
+        }
+        clearEgl();
+        unlockSurface();
+    }
 }
 
 void QAndroidPlatformOpenGLWindow::createEgl(EGLConfig config)
@@ -145,8 +187,8 @@ QSurfaceFormat QAndroidPlatformOpenGLWindow::format() const
 
 void QAndroidPlatformOpenGLWindow::clearEgl()
 {
-    eglMakeCurrent(m_eglDisplay, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
     if (m_eglSurface != EGL_NO_SURFACE) {
+        eglMakeCurrent(m_eglDisplay, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
         eglDestroySurface(m_eglDisplay, m_eglSurface);
         m_eglSurface = EGL_NO_SURFACE;
     }
@@ -170,7 +212,7 @@ void QAndroidPlatformOpenGLWindow::surfaceChanged(JNIEnv *jniEnv, jobject surfac
     // repaint the window
     QRect availableGeometry = screen()->availableGeometry();
     if (geometry().width() > 0 && geometry().height() > 0 && availableGeometry.width() > 0 && availableGeometry.height() > 0)
-        QWindowSystemInterface::handleExposeEvent(window(), QRegion(geometry()));
+        QWindowSystemInterface::handleExposeEvent(window(), QRegion(QRect(QPoint(), geometry().size())));
 }
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidplatformopenglwindow.h b/src/plugins/platforms/android/qandroidplatformopenglwindow.h
index 83df15a524..71787edee1 100644
--- a/src/plugins/platforms/android/qandroidplatformopenglwindow.h
+++ b/src/plugins/platforms/android/qandroidplatformopenglwindow.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,6 +56,10 @@ public:
 
     void checkNativeSurface(EGLConfig config);
 
+    void applicationStateChanged(Qt::ApplicationState);
+
+    void repaint(const QRegion &region) Q_DECL_OVERRIDE;
+
 protected:
     virtual void surfaceChanged(JNIEnv *jniEnv, jobject surface, int w, int h);
     void createEgl(EGLConfig config);
@@ -78,6 +74,7 @@ private:
     QJNIObjectPrivate m_androidSurfaceObject;
     QWaitCondition m_surfaceWaitCondition;
     QSurfaceFormat m_format;
+    QRect m_oldGeometry;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidplatformscreen.cpp b/src/plugins/platforms/android/qandroidplatformscreen.cpp
index 714a670134..1775b442c4 100644
--- a/src/plugins/platforms/android/qandroidplatformscreen.cpp
+++ b/src/plugins/platforms/android/qandroidplatformscreen.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,15 +40,17 @@
 #include "qandroidplatformscreen.h"
 #include "qandroidplatformbackingstore.h"
 #include "qandroidplatformintegration.h"
+#include "qandroidplatformwindow.h"
 #include "androidjnimain.h"
 #include "androidjnimenu.h"
-#include "qandroidplatformrasterwindow.h"
 
 #include <android/bitmap.h>
 #include <android/native_window_jni.h>
+#include <qguiapplication.h>
 
 #include <QtGui/QGuiApplication>
 #include <QtGui/QWindow>
+#include <QtGui/private/qwindow_p.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -102,6 +96,7 @@ QAndroidPlatformScreen::QAndroidPlatformScreen():QObject(),QPlatformScreen()
     m_redrawTimer.setSingleShot(true);
     m_redrawTimer.setInterval(0);
     connect(&m_redrawTimer, SIGNAL(timeout()), this, SLOT(doRedraw()));
+    connect(qGuiApp, &QGuiApplication::applicationStateChanged, this, &QAndroidPlatformScreen::applicationStateChanged);
 }
 
 QAndroidPlatformScreen::~QAndroidPlatformScreen()
@@ -109,8 +104,7 @@ QAndroidPlatformScreen::~QAndroidPlatformScreen()
     if (m_id != -1) {
         QtAndroid::destroySurface(m_id);
         m_surfaceWaitCondition.wakeOne();
-        if (m_nativeSurface)
-            ANativeWindow_release(m_nativeSurface);
+        releaseSurface();
     }
 }
 
@@ -133,7 +127,7 @@ QWindow *QAndroidPlatformScreen::topLevelAt(const QPoint &p) const
 
 void QAndroidPlatformScreen::addWindow(QAndroidPlatformWindow *window)
 {
-    if (window->parent())
+    if (window->parent() && window->isRaster())
         return;
 
     m_windowStack.prepend(window);
@@ -149,10 +143,11 @@ void QAndroidPlatformScreen::addWindow(QAndroidPlatformWindow *window)
 
 void QAndroidPlatformScreen::removeWindow(QAndroidPlatformWindow *window)
 {
-    if (window->parent())
+    if (window->parent() && window->isRaster())
         return;
 
     m_windowStack.removeOne(window);
+
     if (window->isRaster()) {
         m_rasterSurfaces.deref();
         setDirty(window->geometry());
@@ -165,7 +160,7 @@ void QAndroidPlatformScreen::removeWindow(QAndroidPlatformWindow *window)
 
 void QAndroidPlatformScreen::raise(QAndroidPlatformWindow *window)
 {
-    if (window->parent())
+    if (window->parent() && window->isRaster())
         return;
 
     int index = m_windowStack.indexOf(window);
@@ -182,7 +177,7 @@ void QAndroidPlatformScreen::raise(QAndroidPlatformWindow *window)
 
 void QAndroidPlatformScreen::lower(QAndroidPlatformWindow *window)
 {
-    if (window->parent())
+    if (window->parent() && window->isRaster())
         return;
 
     int index = m_windowStack.indexOf(window);
@@ -218,7 +213,7 @@ void QAndroidPlatformScreen::setPhysicalSize(const QSize &size)
 void QAndroidPlatformScreen::setSize(const QSize &size)
 {
     m_size = size;
-    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry());
+    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry(), availableGeometry());
 }
 
 void QAndroidPlatformScreen::setAvailableGeometry(const QRect &rect)
@@ -230,8 +225,7 @@ void QAndroidPlatformScreen::setAvailableGeometry(const QRect &rect)
     QRect oldGeometry = m_availableGeometry;
 
     m_availableGeometry = rect;
-    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry());
-    QWindowSystemInterface::handleScreenAvailableGeometryChange(QPlatformScreen::screen(), availableGeometry());
+    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry(), availableGeometry());
     resizeMaximizedWindows();
 
     if (oldGeometry.width() == 0 && oldGeometry.height() == 0 && rect.width() > 0 && rect.height() > 0) {
@@ -241,20 +235,31 @@ void QAndroidPlatformScreen::setAvailableGeometry(const QRect &rect)
             if (w->handle()) {
                 QRect geometry = w->handle()->geometry();
                 if (geometry.width() > 0 && geometry.height() > 0)
-                    QWindowSystemInterface::handleExposeEvent(w, QRegion(geometry));
+                    QWindowSystemInterface::handleExposeEvent(w, QRect(QPoint(0, 0), geometry.size()));
             }
         }
     }
 
     if (m_id != -1) {
-        if (m_nativeSurface) {
-            ANativeWindow_release(m_nativeSurface);
-            m_nativeSurface = 0;
-        }
+        releaseSurface();
         QtAndroid::setSurfaceGeometry(m_id, rect);
     }
 }
 
+void QAndroidPlatformScreen::applicationStateChanged(Qt::ApplicationState state)
+{
+    foreach (QAndroidPlatformWindow *w, m_windowStack)
+        w->applicationStateChanged(state);
+
+    if (state <=  Qt::ApplicationHidden && QtAndroid::blockEventLoopsWhenSuspended()) {
+        lockSurface();
+        QtAndroid::destroySurface(m_id);
+        m_id = -1;
+        releaseSurface();
+        unlockSurface();
+    }
+}
+
 void QAndroidPlatformScreen::topWindowChanged(QWindow *w)
 {
     QtAndroidMenu::setActiveTopLevelWindow(w);
@@ -278,6 +283,19 @@ void QAndroidPlatformScreen::doRedraw()
     if (m_dirtyRect.isEmpty())
         return;
 
+    // Stop if there no visible raster windows. This is important because if we only have
+    // RasterGLSurface windows that have renderToTexture children (i.e. they need the
+    // OpenGL path) then we must bail out right now.
+    bool hasVisibleRasterWindows = false;
+    foreach (QAndroidPlatformWindow *window, m_windowStack) {
+        if (window->window()->isVisible() && window->isRaster() && !qt_window_private(window->window())->compositing) {
+            hasVisibleRasterWindows = true;
+            break;
+        }
+    }
+    if (!hasVisibleRasterWindows)
+        return;
+
     QMutexLocker lock(&m_surfaceMutex);
     if (m_id == -1 && m_rasterSurfaces) {
         m_id = QtAndroid::createSurface(this, m_availableGeometry, true, m_depth);
@@ -330,9 +348,9 @@ void QAndroidPlatformScreen::doRedraw()
 
             visibleRegion -= targetRect;
             QRect windowRect = targetRect.translated(-window->geometry().topLeft());
-            QAndroidPlatformBackingStore *backingStore = static_cast<QAndroidPlatformRasterWindow *>(window)->backingStore();
+            QAndroidPlatformBackingStore *backingStore = static_cast<QAndroidPlatformWindow *>(window)->backingStore();
             if (backingStore)
-                compositePainter.drawImage(targetRect.topLeft(), backingStore->image(), windowRect);
+                compositePainter.drawImage(targetRect.topLeft(), backingStore->toImage(), windowRect);
         }
     }
 
@@ -365,18 +383,22 @@ void QAndroidPlatformScreen::surfaceChanged(JNIEnv *env, jobject surface, int w,
 {
     lockSurface();
     if (surface && w && h) {
-        if (m_nativeSurface)
-            ANativeWindow_release(m_nativeSurface);
+        releaseSurface();
         m_nativeSurface = ANativeWindow_fromSurface(env, surface);
         QMetaObject::invokeMethod(this, "setDirty", Qt::QueuedConnection, Q_ARG(QRect, QRect(0, 0, w, h)));
     } else {
-        if (m_nativeSurface) {
-            ANativeWindow_release(m_nativeSurface);
-            m_nativeSurface = 0;
-        }
+        releaseSurface();
     }
     unlockSurface();
     m_surfaceWaitCondition.wakeOne();
 }
 
+void QAndroidPlatformScreen::releaseSurface()
+{
+    if (m_nativeSurface) {
+        ANativeWindow_release(m_nativeSurface);
+        m_nativeSurface = 0;
+    }
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidplatformscreen.h b/src/plugins/platforms/android/qandroidplatformscreen.h
index cd9cf2ca71..6410582f5d 100644
--- a/src/plugins/platforms/android/qandroidplatformscreen.h
+++ b/src/plugins/platforms/android/qandroidplatformscreen.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -107,6 +99,8 @@ private:
     Qt::ScreenOrientation orientation() const;
     Qt::ScreenOrientation nativeOrientation() const;
     void surfaceChanged(JNIEnv *env, jobject surface, int w, int h);
+    void releaseSurface();
+    void applicationStateChanged(Qt::ApplicationState);
 
 private slots:
     void doRedraw();
diff --git a/src/plugins/platforms/android/qandroidplatformservices.cpp b/src/plugins/platforms/android/qandroidplatformservices.cpp
index 1f2f58f838..3782c21d52 100644
--- a/src/plugins/platforms/android/qandroidplatformservices.cpp
+++ b/src/plugins/platforms/android/qandroidplatformservices.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformservices.h b/src/plugins/platforms/android/qandroidplatformservices.h
index dd6872b2e9..8a7db36f18 100644
--- a/src/plugins/platforms/android/qandroidplatformservices.h
+++ b/src/plugins/platforms/android/qandroidplatformservices.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidplatformtheme.cpp b/src/plugins/platforms/android/qandroidplatformtheme.cpp
index 1c9be189c8..02974018aa 100644
--- a/src/plugins/platforms/android/qandroidplatformtheme.cpp
+++ b/src/plugins/platforms/android/qandroidplatformtheme.cpp
@@ -5,40 +5,33 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
+#include "androidjnimenu.h"
 #include "qandroidplatformtheme.h"
 #include "qandroidplatformmenubar.h"
 #include "qandroidplatformmenu.h"
@@ -104,6 +97,11 @@ QPlatformMenuItem *QAndroidPlatformTheme::createPlatformMenuItem() const
     return new QAndroidPlatformMenuItem;
 }
 
+void QAndroidPlatformTheme::showPlatformMenuBar()
+{
+    QtAndroidMenu::openOptionsMenu();
+}
+
 static inline int paletteType(QPlatformTheme::Palette type)
 {
     switch (type) {
diff --git a/src/plugins/platforms/android/qandroidplatformtheme.h b/src/plugins/platforms/android/qandroidplatformtheme.h
index c37c9986c6..01611bf9d4 100644
--- a/src/plugins/platforms/android/qandroidplatformtheme.h
+++ b/src/plugins/platforms/android/qandroidplatformtheme.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,7 @@ public:
     virtual QPlatformMenuBar *createPlatformMenuBar() const;
     virtual QPlatformMenu *createPlatformMenu() const;
     virtual QPlatformMenuItem *createPlatformMenuItem() const;
+    virtual void showPlatformMenuBar();
     virtual const QPalette *palette(Palette type = SystemPalette) const;
     virtual const QFont *font(Font type = SystemFont) const;
     virtual QVariant themeHint(ThemeHint hint) const;
diff --git a/src/plugins/platforms/android/qandroidplatformwindow.cpp b/src/plugins/platforms/android/qandroidplatformwindow.cpp
index 558525b78c..03cb186a81 100644
--- a/src/plugins/platforms/android/qandroidplatformwindow.cpp
+++ b/src/plugins/platforms/android/qandroidplatformwindow.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,6 +37,8 @@
 #include "qandroidplatformscreen.h"
 
 #include "androidjnimain.h"
+
+#include <qguiapplication.h>
 #include <qpa/qwindowsysteminterface.h>
 
 QT_BEGIN_NAMESPACE
@@ -160,5 +154,21 @@ void QAndroidPlatformWindow::updateStatusBarVisibility()
     }
 }
 
+bool QAndroidPlatformWindow::isExposed() const
+{
+    return qApp->applicationState() > Qt::ApplicationHidden
+            && window()->isVisible()
+            && !window()->geometry().isEmpty();
+}
+
+void QAndroidPlatformWindow::applicationStateChanged(Qt::ApplicationState)
+{
+    QRegion region;
+    if (isExposed())
+        region = QRect(QPoint(), geometry().size());
+
+    QWindowSystemInterface::handleExposeEvent(window(), region);
+    QWindowSystemInterface::flushWindowSystemEvents();
+}
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidplatformwindow.h b/src/plugins/platforms/android/qandroidplatformwindow.h
index 764dd3ab86..edf062bcb4 100644
--- a/src/plugins/platforms/android/qandroidplatformwindow.h
+++ b/src/plugins/platforms/android/qandroidplatformwindow.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2014 BogDan Vatra <bogdan@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -49,6 +41,7 @@
 QT_BEGIN_NAMESPACE
 
 class QAndroidPlatformScreen;
+class QAndroidPlatformBackingStore;
 
 class QAndroidPlatformWindow: public QPlatformWindow
 {
@@ -71,7 +64,21 @@ public:
     void propagateSizeHints();
     void requestActivateWindow();
     void updateStatusBarVisibility();
-    inline bool isRaster() const { return window()->surfaceType() == QSurface::RasterSurface; }
+    inline bool isRaster() const {
+        if ((window()->flags() & Qt::ForeignWindow) == Qt::ForeignWindow)
+            return false;
+
+        return window()->surfaceType() == QSurface::RasterSurface
+            || window()->surfaceType() == QSurface::RasterGLSurface;
+    }
+    bool isExposed() const;
+
+    virtual void applicationStateChanged(Qt::ApplicationState);
+
+    void setBackingStore(QAndroidPlatformBackingStore *store) { m_backingStore = store; }
+    QAndroidPlatformBackingStore *backingStore() const { return m_backingStore; }
+
+    virtual void repaint(const QRegion &) { }
 
 protected:
     void setGeometry(const QRect &rect);
@@ -81,6 +88,8 @@ protected:
     Qt::WindowState m_windowState;
 
     WId m_windowId;
+
+    QAndroidPlatformBackingStore *m_backingStore = nullptr;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/android/qandroidsystemlocale.cpp b/src/plugins/platforms/android/qandroidsystemlocale.cpp
index a20f970a44..b4bf3a37df 100644
--- a/src/plugins/platforms/android/qandroidsystemlocale.cpp
+++ b/src/plugins/platforms/android/qandroidsystemlocale.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/android/qandroidsystemlocale.h b/src/plugins/platforms/android/qandroidsystemlocale.h
index fc2f6fad98..4ae918b76e 100644
--- a/src/plugins/platforms/android/qandroidsystemlocale.h
+++ b/src/plugins/platforms/android/qandroidsystemlocale.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/cocoa.pro b/src/plugins/platforms/cocoa/cocoa.pro
index 1f9c0e051d..ad6cb3a1fc 100644
--- a/src/plugins/platforms/cocoa/cocoa.pro
+++ b/src/plugins/platforms/cocoa/cocoa.pro
@@ -14,7 +14,6 @@ OBJECTIVE_SOURCES += main.mm \
     qnsviewaccessibility.mm \
     qcocoaautoreleasepool.mm \
     qnswindowdelegate.mm \
-    qcocoaglcontext.mm \
     qcocoanativeinterface.mm \
     qcocoaeventdispatcher.mm \
     qcocoaapplicationdelegate.mm \
@@ -51,7 +50,6 @@ HEADERS += qcocoaintegration.h \
     qnsview.h \
     qcocoaautoreleasepool.h \
     qnswindowdelegate.h \
-    qcocoaglcontext.h \
     qcocoanativeinterface.h \
     qcocoaeventdispatcher.h \
     qcocoaapplicationdelegate.h \
@@ -80,6 +78,12 @@ HEADERS += qcocoaintegration.h \
     messages.h \
     qcocoamimetypes.h
 
+contains(QT_CONFIG, opengl.*) {
+    OBJECTIVE_SOURCES += qcocoaglcontext.mm
+
+    HEADERS += qcocoaglcontext.h
+}
+
 RESOURCES += qcocoaresources.qrc
 
 LIBS += -framework Cocoa -framework Carbon -framework IOKit -lcups
diff --git a/src/plugins/platforms/cocoa/messages.cpp b/src/plugins/platforms/cocoa/messages.cpp
index 4f7b038c6f..209926540a 100644
--- a/src/plugins/platforms/cocoa/messages.cpp
+++ b/src/plugins/platforms/cocoa/messages.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/messages.h b/src/plugins/platforms/cocoa/messages.h
index 97f3ea7009..4c9e16f22a 100644
--- a/src/plugins/platforms/cocoa/messages.h
+++ b/src/plugins/platforms/cocoa/messages.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaaccessibility.h b/src/plugins/platforms/cocoa/qcocoaaccessibility.h
index a78901bfb1..96dbd23695 100644
--- a/src/plugins/platforms/cocoa/qcocoaaccessibility.h
+++ b/src/plugins/platforms/cocoa/qcocoaaccessibility.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaaccessibility.mm b/src/plugins/platforms/cocoa/qcocoaaccessibility.mm
index 72045a1bbb..1ade985b79 100644
--- a/src/plugins/platforms/cocoa/qcocoaaccessibility.mm
+++ b/src/plugins/platforms/cocoa/qcocoaaccessibility.mm
@@ -55,7 +55,7 @@ QCocoaAccessibility::~QCocoaAccessibility()
 
 void QCocoaAccessibility::notifyAccessibilityUpdate(QAccessibleEvent *event)
 {
-    QCocoaAccessibleElement *element = [QCocoaAccessibleElement elementWithId: event->uniqueId()];
+    QMacAccessibilityElement *element = [QMacAccessibilityElement elementWithId: event->uniqueId()];
     if (!element) {
         qWarning() << "QCocoaAccessibility::notifyAccessibilityUpdate: invalid element";
         return;
@@ -140,7 +140,7 @@ static void populateRoleMap()
     roleMap[QAccessible::Row] = NSAccessibilityRowRole;
     roleMap[QAccessible::RowHeader] = NSAccessibilityRowRole;
     roleMap[QAccessible::Cell] = NSAccessibilityTextFieldRole;
-    roleMap[QAccessible::PushButton] = NSAccessibilityButtonRole;
+    roleMap[QAccessible::Button] = NSAccessibilityButtonRole;
     roleMap[QAccessible::EditableText] = NSAccessibilityTextFieldRole;
     roleMap[QAccessible::Link] = NSAccessibilityLinkRole;
     roleMap[QAccessible::Indicator] = NSAccessibilityValueIndicatorRole;
@@ -149,6 +149,16 @@ static void populateRoleMap()
     roleMap[QAccessible::ListItem] = NSAccessibilityStaticTextRole;
     roleMap[QAccessible::Cell] = NSAccessibilityStaticTextRole;
     roleMap[QAccessible::Client] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::Paragraph] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::Section] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::WebDocument] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::ColorChooser] = NSAccessibilityColorWellRole;
+    roleMap[QAccessible::Footer] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::Form] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::Heading] = @"AXHeading";
+    roleMap[QAccessible::Note] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::ComplementaryContent] = NSAccessibilityGroupRole;
+    roleMap[QAccessible::Graphic] = NSAccessibilityImageRole;
 }
 
 /*
@@ -244,7 +254,7 @@ NSArray *unignoredChildren(QAccessibleInterface *interface)
         QAccessible::Id childId = QAccessible::uniqueId(child);
         //qDebug() << "    kid: " << childId << child;
 
-        QCocoaAccessibleElement *element = [QCocoaAccessibleElement elementWithId: childId];
+        QMacAccessibilityElement *element = [QMacAccessibilityElement elementWithId: childId];
         if (element)
             [kids addObject: element];
         else
@@ -343,7 +353,7 @@ id getValueAttribute(QAccessibleInterface *interface)
     }
 
     if (QAccessibleValueInterface *valueInterface = interface->valueInterface()) {
-        return QCFString::toNSString(QString::number(valueInterface->currentValue().toDouble()));
+        return QCFString::toNSString(valueInterface->currentValue().toString());
     }
 
     if (interface->state().checkable) {
diff --git a/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.h b/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.h
index 9760f492ea..dd97a6033b 100644
--- a/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.h
+++ b/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,18 +42,18 @@
 
 #import <qaccessible.h>
 
-@class QT_MANGLE_NAMESPACE(QCocoaAccessibleElement);
+@class QT_MANGLE_NAMESPACE(QMacAccessibilityElement);
 
-@interface QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) : NSObject {
+@interface QT_MANGLE_NAMESPACE(QMacAccessibilityElement) : NSObject {
     NSString *role;
     QAccessible::Id axid;
 }
 
 - (id)initWithId:(QAccessible::Id)anId;
-+ (QT_MANGLE_NAMESPACE(QCocoaAccessibleElement) *)elementWithId:(QAccessible::Id)anId;
++ (QT_MANGLE_NAMESPACE(QMacAccessibilityElement) *)elementWithId:(QAccessible::Id)anId;
 
 @end
 
-QT_NAMESPACE_ALIAS_OBJC_CLASS(QCocoaAccessibleElement);
+QT_NAMESPACE_ALIAS_OBJC_CLASS(QMacAccessibilityElement);
 
 #endif
diff --git a/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.mm b/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.mm
index 078dc67cad..9f803e411d 100644
--- a/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.mm
+++ b/src/plugins/platforms/cocoa/qcocoaaccessibilityelement.mm
@@ -43,12 +43,12 @@
 #include "qcocoahelpers.h"
 #include "qcocoawindow.h"
 #include "private/qaccessiblecache_p.h"
-
+#include <QtPlatformSupport/private/qaccessiblebridgeutils_p.h>
 #include <QtGui/qaccessible.h>
 
 #import <AppKit/NSAccessibility.h>
 
-@implementation QCocoaAccessibleElement
+@implementation QMacAccessibilityElement
 
 - (id)initWithId:(QAccessible::Id)anId
 {
@@ -72,7 +72,7 @@
 
     QAccessibleCache *cache = QAccessibleCache::instance();
 
-    QCocoaAccessibleElement *element = cache->elementForId(anId);
+    QMacAccessibilityElement *element = cache->elementForId(anId);
     if (!element) {
         QAccessibleInterface *iface = QAccessible::accessibleInterface(anId);
         Q_ASSERT(iface);
@@ -95,8 +95,8 @@
 }
 
 - (BOOL)isEqual:(id)object {
-    if ([object isKindOfClass:[QCocoaAccessibleElement class]]) {
-        QCocoaAccessibleElement *other = object;
+    if ([object isKindOfClass:[QMacAccessibilityElement class]]) {
+        QMacAccessibilityElement *other = object;
         return other->axid == axid;
     } else {
         return NO;
@@ -196,7 +196,7 @@
     }
 
     QAccessible::Id parentId = QAccessible::uniqueId(parent);
-    return [QCocoaAccessibleElement elementWithId: parentId];
+    return [QMacAccessibilityElement elementWithId: parentId];
 }
 
 
@@ -345,7 +345,7 @@
     }
     if ([attribute isEqualToString: NSAccessibilityLineForIndexParameterizedAttribute]) {
         int index = [parameter intValue];
-        NSNumber *ln = [QCocoaAccessibleElement lineNumberForIndex: index forText: iface->text(QAccessible::Value)];
+        NSNumber *ln = [QMacAccessibilityElement lineNumberForIndex: index forText: iface->text(QAccessible::Value)];
         return ln;
     }
     if ([attribute isEqualToString: NSAccessibilityRangeForLineParameterizedAttribute]) {
@@ -430,15 +430,11 @@
     if (!iface)
         return nsActions;
 
-    QAccessibleActionInterface *actionInterface = iface->actionInterface();
-    if (actionInterface) {
-        QStringList supportedActionNames = actionInterface->actionNames();
-
-        foreach (const QString &qtAction, supportedActionNames) {
-            NSString *nsAction = QCocoaAccessible::getTranslatedAction(qtAction);
-            if (nsAction)
-                [nsActions addObject : nsAction];
-        }
+    const QStringList &supportedActionNames = QAccessibleBridgeUtils::effectiveActionNames(iface);
+    foreach (const QString &qtAction, supportedActionNames) {
+        NSString *nsAction = QCocoaAccessible::getTranslatedAction(qtAction);
+        if (nsAction)
+            [nsActions addObject : nsAction];
     }
 
     return nsActions;
@@ -448,27 +444,25 @@
     QAccessibleInterface *iface = QAccessible::accessibleInterface(axid);
     if (!iface)
         return nil; // FIXME is that the right return type??
-    QAccessibleActionInterface *actionInterface = iface->actionInterface();
-    if (actionInterface) {
-        QString qtAction = QCocoaAccessible::translateAction(action);
-
-        // Return a description from the action interface if this action is not known to the OS.
-        if (qtAction.isEmpty()) {
-            QString description = actionInterface->localizedActionDescription(qtAction);
-            return QCFString::toNSString(description);
+    QString qtAction = QCocoaAccessible::translateAction(action);
+    QString description;
+    // Return a description from the action interface if this action is not known to the OS.
+    if (qtAction.isEmpty()) {
+        if (QAccessibleActionInterface *actionInterface = iface->actionInterface()) {
+            qtAction = QString::fromNSString((NSString *)action);
+            description = actionInterface->localizedActionDescription(qtAction);
         }
+    } else {
+        description = qAccessibleLocalizedActionDescription(qtAction);
     }
-
-    return NSAccessibilityActionDescription(action);
+    return QCFString::toNSString(description);
 }
 
 - (void)accessibilityPerformAction:(NSString *)action {
     QAccessibleInterface *iface = QAccessible::accessibleInterface(axid);
     if (iface) {
-        QAccessibleActionInterface *actionInterface = iface->actionInterface();
-        if (actionInterface) {
-            actionInterface->doAction(QCocoaAccessible::translateAction(action));
-        }
+        const QString qtAction = QCocoaAccessible::translateAction(action);
+        QAccessibleBridgeUtils::performEffectiveAction(iface, qtAction);
     }
 }
 
@@ -504,7 +498,7 @@
 
     QAccessible::Id childId = QAccessible::uniqueId(childInterface);
     // hit a child, forward to child accessible interface.
-    QCocoaAccessibleElement *accessibleElement = [QCocoaAccessibleElement elementWithId:childId];
+    QMacAccessibilityElement *accessibleElement = [QMacAccessibilityElement elementWithId:childId];
     if (accessibleElement)
         return NSAccessibilityUnignoredAncestor(accessibleElement);
     return NSAccessibilityUnignoredAncestor(self);
@@ -521,7 +515,7 @@
     QAccessibleInterface *childInterface = iface->focusChild();
     if (childInterface) {
         QAccessible::Id childAxid = QAccessible::uniqueId(childInterface);
-        QCocoaAccessibleElement *accessibleElement = [QCocoaAccessibleElement elementWithId:childAxid];
+        QMacAccessibilityElement *accessibleElement = [QMacAccessibilityElement elementWithId:childAxid];
         return NSAccessibilityUnignoredAncestor(accessibleElement);
     }
 
diff --git a/src/plugins/platforms/cocoa/qcocoaapplication.h b/src/plugins/platforms/cocoa/qcocoaapplication.h
index bb218bcabe..79121ecf70 100644
--- a/src/plugins/platforms/cocoa/qcocoaapplication.h
+++ b/src/plugins/platforms/cocoa/qcocoaapplication.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.h b/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.h
index 7f6c4224df..017d9497c4 100644
--- a/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.h
+++ b/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm b/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm
index 24ad75ceec..326628a261 100644
--- a/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm
+++ b/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm
@@ -343,6 +343,7 @@ static void cleanupCocoaApplicationDelegate()
         && [reflectionDelegate respondsToSelector:@selector(applicationDidBecomeActive:)])
         [reflectionDelegate applicationDidBecomeActive:notification];
 
+    QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationActive);
 /*
     onApplicationChangedActivation(true);
 
@@ -366,6 +367,7 @@ static void cleanupCocoaApplicationDelegate()
         && [reflectionDelegate respondsToSelector:@selector(applicationDidResignActive:)])
         [reflectionDelegate applicationDidResignActive:notification];
 
+    QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationInactive);
 /*
     onApplicationChangedActivation(false);
 
@@ -377,6 +379,26 @@ static void cleanupCocoaApplicationDelegate()
 */
 }
 
+- (BOOL)applicationShouldHandleReopen:(NSApplication *)theApplication hasVisibleWindows:(BOOL)flag
+{
+    Q_UNUSED(theApplication);
+    Q_UNUSED(flag);
+    if (reflectionDelegate
+        && [reflectionDelegate respondsToSelector:@selector(applicationShouldHandleReopen:hasVisibleWindows:)])
+        return [reflectionDelegate applicationShouldHandleReopen:theApplication hasVisibleWindows:flag];
+
+    /*
+       true to force delivery of the event even if the application state is already active,
+       because rapp (handle reopen) events are sent each time the dock icon is clicked regardless
+       of the active state of the application or number of visible windows. For example, a browser
+       app that has no windows opened would need the event be to delivered even if it was already
+       active in order to create a new window as per OS X conventions.
+     */
+    QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationActive, true /*forcePropagate*/);
+
+    return NO;
+}
+
 - (void)setReflectionDelegate:(NSObject <NSApplicationDelegate> *)oldDelegate
 {
     [oldDelegate retain];
diff --git a/src/plugins/platforms/cocoa/qcocoaautoreleasepool.h b/src/plugins/platforms/cocoa/qcocoaautoreleasepool.h
index 6c571498e3..313b328e99 100644
--- a/src/plugins/platforms/cocoa/qcocoaautoreleasepool.h
+++ b/src/plugins/platforms/cocoa/qcocoaautoreleasepool.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoabackingstore.h b/src/plugins/platforms/cocoa/qcocoabackingstore.h
index a33373c4c1..bfff5c3266 100644
--- a/src/plugins/platforms/cocoa/qcocoabackingstore.h
+++ b/src/plugins/platforms/cocoa/qcocoabackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,7 +51,9 @@ public:
 
     QPaintDevice *paintDevice();
     void flush(QWindow *widget, const QRegion &region, const QPoint &offset);
+#ifndef QT_NO_OPENGL
     QImage toImage() const Q_DECL_OVERRIDE;
+#endif
     void resize (const QSize &size, const QRegion &);
     bool scroll(const QRegion &area, int dx, int dy);
     CGImageRef getBackingStoreCGImage();
diff --git a/src/plugins/platforms/cocoa/qcocoabackingstore.mm b/src/plugins/platforms/cocoa/qcocoabackingstore.mm
index d76645c668..e13e295511 100644
--- a/src/plugins/platforms/cocoa/qcocoabackingstore.mm
+++ b/src/plugins/platforms/cocoa/qcocoabackingstore.mm
@@ -96,10 +96,12 @@ void QCocoaBackingStore::flush(QWindow *win, const QRegion &region, const QPoint
     }
 }
 
+#ifndef QT_NO_OPENGL
 QImage QCocoaBackingStore::toImage() const
 {
     return m_qImage;
 }
+#endif
 
 void QCocoaBackingStore::resize(const QSize &size, const QRegion &)
 {
diff --git a/src/plugins/platforms/cocoa/qcocoaclipboard.h b/src/plugins/platforms/cocoa/qcocoaclipboard.h
index 323f67bfd3..5ebdad79f1 100644
--- a/src/plugins/platforms/cocoa/qcocoaclipboard.h
+++ b/src/plugins/platforms/cocoa/qcocoaclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoacolordialoghelper.h b/src/plugins/platforms/cocoa/qcocoacolordialoghelper.h
index 59e029769d..1672d23fae 100644
--- a/src/plugins/platforms/cocoa/qcocoacolordialoghelper.h
+++ b/src/plugins/platforms/cocoa/qcocoacolordialoghelper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoacolordialoghelper.mm b/src/plugins/platforms/cocoa/qcocoacolordialoghelper.mm
index be2bab8ce7..8158c244ab 100644
--- a/src/plugins/platforms/cocoa/qcocoacolordialoghelper.mm
+++ b/src/plugins/platforms/cocoa/qcocoacolordialoghelper.mm
@@ -59,8 +59,8 @@ static NSButton *macCreateButton(const char *text, NSView *superview)
     NSButton *button = [[NSButton alloc] initWithFrame:buttonFrameRect];
     [button setButtonType:NSMomentaryLightButton];
     [button setBezelStyle:NSRoundedBezelStyle];
-    [button setTitle:(NSString*)(CFStringRef)QCFString(QCoreApplication::translate("QDialogButtonBox", text)
-                                                       .remove(QLatin1Char('&')))];
+    [button setTitle:(NSString*)(CFStringRef)QCFString(
+            qt_mac_removeMnemonics(QCoreApplication::translate("QDialogButtonBox", text)))];
     [[button cell] setFont:[NSFont systemFontOfSize:
             [NSFont systemFontSizeForControlSize:NSRegularControlSize]]];
     [superview addSubview:button];
@@ -81,6 +81,7 @@ static NSButton *macCreateButton(const char *text, NSView *superview)
     NSInteger mResultCode;
     BOOL mDialogIsExecuting;
     BOOL mResultSet;
+    BOOL mClosingDueToKnownButton;
 };
 - (void)restoreOriginalContentView;
 - (void)relayout;
@@ -103,6 +104,7 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSColorPanelDelegate);
     mResultCode = NSCancelButton;
     mDialogIsExecuting = false;
     mResultSet = false;
+    mClosingDueToKnownButton = false;
 
 #if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_7
     if (QSysInfo::MacintoshVersion >= QSysInfo::MV_10_7)
@@ -114,6 +116,11 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSColorPanelDelegate);
         name:NSColorPanelColorDidChangeNotification
         object:mColorPanel];
 
+    [[NSNotificationCenter defaultCenter] addObserver:self
+      selector:@selector(windowWillClose:)
+      name:NSWindowWillCloseNotification
+      object:mColorPanel];
+
     [mColorPanel retain];
     return self;
 }
@@ -179,6 +186,15 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSColorPanelDelegate);
         emit mHelper->colorSelected(mQtColor);
 }
 
+- (void)windowWillClose:(NSNotification *)notification
+{
+    Q_UNUSED(notification);
+    if (mCancelButton && mHelper && !mClosingDueToKnownButton) {
+        mClosingDueToKnownButton = true; // prevent repeating emit
+        emit mHelper->reject();
+    }
+}
+
 - (void)restoreOriginalContentView
 {
     if (mStolenContentView) {
@@ -246,6 +262,7 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSColorPanelDelegate);
 
 - (void)onOkClicked
 {
+    mClosingDueToKnownButton = true;
     [mColorPanel close];
     [self updateQtColor];
     [self finishOffWithCode:NSOKButton];
@@ -254,6 +271,7 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSColorPanelDelegate);
 - (void)onCancelClicked
 {
     if (mOkButton) {
+        mClosingDueToKnownButton = true;
         [mColorPanel close];
         mQtColor = QColor();
         [self finishOffWithCode:NSCancelButton];
@@ -298,6 +316,7 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSColorPanelDelegate);
 {
     mDialogIsExecuting = false;
     mResultSet = false;
+    mClosingDueToKnownButton = false;
     [mColorPanel makeKeyAndOrderFront:mColorPanel];
 }
 
diff --git a/src/plugins/platforms/cocoa/qcocoacursor.h b/src/plugins/platforms/cocoa/qcocoacursor.h
index f332240724..9d8a517bfe 100644
--- a/src/plugins/platforms/cocoa/qcocoacursor.h
+++ b/src/plugins/platforms/cocoa/qcocoacursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoadrag.h b/src/plugins/platforms/cocoa/qcocoadrag.h
index 6810a21944..53c3f82135 100644
--- a/src/plugins/platforms/cocoa/qcocoadrag.h
+++ b/src/plugins/platforms/cocoa/qcocoadrag.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaeventdispatcher.h b/src/plugins/platforms/cocoa/qcocoaeventdispatcher.h
index dc0b8fcc18..bd57e64c8b 100644
--- a/src/plugins/platforms/cocoa/qcocoaeventdispatcher.h
+++ b/src/plugins/platforms/cocoa/qcocoaeventdispatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoafiledialoghelper.h b/src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
index 16d1ffbe85..9cbf8fe5f1 100644
--- a/src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
+++ b/src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm b/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm
index a47b28700c..78465b896d 100644
--- a/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm
+++ b/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm
@@ -191,16 +191,7 @@ QT_NAMESPACE_ALIAS_OBJC_CLASS(QNSOpenSavePanelDelegate);
 static QString strippedText(QString s)
 {
     s.remove( QString::fromLatin1("...") );
-    int i = 0;
-    while (i < s.size()) {
-        ++i;
-        if (s.at(i-1) != QLatin1Char('&'))
-            continue;
-        if (i < s.size() && s.at(i) == QLatin1Char('&'))
-            ++i;
-        s.remove(i-1,1);
-    }
-    return s.trimmed();
+    return qt_mac_removeMnemonics(s).trimmed();
 }
 
 - (NSString *)strip:(const QString &)label
diff --git a/src/plugins/platforms/cocoa/qcocoafontdialoghelper.h b/src/plugins/platforms/cocoa/qcocoafontdialoghelper.h
index 83aebba6d3..7cc7f5cc76 100644
--- a/src/plugins/platforms/cocoa/qcocoafontdialoghelper.h
+++ b/src/plugins/platforms/cocoa/qcocoafontdialoghelper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoafontdialoghelper.mm b/src/plugins/platforms/cocoa/qcocoafontdialoghelper.mm
index a18f721e04..c37bb63916 100644
--- a/src/plugins/platforms/cocoa/qcocoafontdialoghelper.mm
+++ b/src/plugins/platforms/cocoa/qcocoafontdialoghelper.mm
@@ -79,8 +79,8 @@ static NSButton *macCreateButton(const char *text, NSView *superview)
     NSButton *button = [[NSButton alloc] initWithFrame:buttonFrameRect];
     [button setButtonType:NSMomentaryLightButton];
     [button setBezelStyle:NSRoundedBezelStyle];
-    [button setTitle:(NSString*)(CFStringRef)QCFString(QCoreApplication::translate("QDialogButtonBox", text)
-                                                       .remove(QLatin1Char('&')))];
+    [button setTitle:(NSString*)(CFStringRef)QCFString(
+            qt_mac_removeMnemonics(QCoreApplication::translate("QDialogButtonBox", text)))];
     [[button cell] setFont:[NSFont systemFontOfSize:
             [NSFont systemFontSizeForControlSize:NSRegularControlSize]]];
     [superview addSubview:button];
diff --git a/src/plugins/platforms/cocoa/qcocoaglcontext.h b/src/plugins/platforms/cocoa/qcocoaglcontext.h
index 30f1cdc278..fc0c5f276c 100644
--- a/src/plugins/platforms/cocoa/qcocoaglcontext.h
+++ b/src/plugins/platforms/cocoa/qcocoaglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,7 +47,7 @@ QT_BEGIN_NAMESPACE
 class QCocoaGLContext : public QPlatformOpenGLContext
 {
 public:
-    QCocoaGLContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share);
+    QCocoaGLContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, const QVariant &nativeHandle);
     ~QCocoaGLContext();
 
     QSurfaceFormat format() const;
@@ -77,6 +69,8 @@ public:
 
     void windowWasHidden();
 
+    QVariant nativeHandle() const;
+
 private:
     void setActiveWindow(QWindow *window);
     void updateSurfaceFormat();
diff --git a/src/plugins/platforms/cocoa/qcocoaglcontext.mm b/src/plugins/platforms/cocoa/qcocoaglcontext.mm
index 3f61bd81ee..7b70fbb4bb 100644
--- a/src/plugins/platforms/cocoa/qcocoaglcontext.mm
+++ b/src/plugins/platforms/cocoa/qcocoaglcontext.mm
@@ -46,6 +46,7 @@
 #include <qdebug.h>
 #include <QtCore/private/qcore_mac_p.h>
 #include <QtPlatformSupport/private/cglconvenience_p.h>
+#include <QtPlatformHeaders/qcocoanativecontext.h>
 
 #import <Cocoa/Cocoa.h>
 
@@ -117,11 +118,33 @@ static void updateFormatFromContext(QSurfaceFormat *format)
         format->setProfile(QSurfaceFormat::CompatibilityProfile);
 }
 
-QCocoaGLContext::QCocoaGLContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share)
+QCocoaGLContext::QCocoaGLContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share,
+                                 const QVariant &nativeHandle)
     : m_context(nil),
       m_shareContext(nil),
       m_format(format)
 {
+    if (!nativeHandle.isNull()) {
+        if (!nativeHandle.canConvert<QCocoaNativeContext>()) {
+            qWarning("QCocoaGLContext: Requires a QCocoaNativeContext");
+            return;
+        }
+        QCocoaNativeContext handle = nativeHandle.value<QCocoaNativeContext>();
+        NSOpenGLContext *context = handle.context();
+        if (!context) {
+            qWarning("QCocoaGLContext: No NSOpenGLContext given");
+            return;
+        }
+        m_context = context;
+        [m_context retain];
+        m_shareContext = share ? static_cast<QCocoaGLContext *>(share)->nsOpenGLContext() : nil;
+        // OpenGL surfaces can be ordered either above(default) or below the NSWindow.
+        const GLint order = qt_mac_resolveOption(1, "QT_MAC_OPENGL_SURFACE_ORDER");
+        [m_context setValues:&order forParameter:NSOpenGLCPSurfaceOrder];
+        updateSurfaceFormat();
+        return;
+    }
+
     // we only support OpenGL contexts under Cocoa
     if (m_format.renderableType() == QSurfaceFormat::DefaultRenderableType)
         m_format.setRenderableType(QSurfaceFormat::OpenGL);
@@ -168,6 +191,11 @@ QCocoaGLContext::~QCocoaGLContext()
     [m_context release];
 }
 
+QVariant QCocoaGLContext::nativeHandle() const
+{
+    return QVariant::fromValue<QCocoaNativeContext>(QCocoaNativeContext(m_context));
+}
+
 // Match up with createNSOpenGLPixelFormat!
 QSurfaceFormat QCocoaGLContext::format() const
 {
diff --git a/src/plugins/platforms/cocoa/qcocoahelpers.h b/src/plugins/platforms/cocoa/qcocoahelpers.h
index 3b72184d83..138109696d 100644
--- a/src/plugins/platforms/cocoa/qcocoahelpers.h
+++ b/src/plugins/platforms/cocoa/qcocoahelpers.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -80,6 +72,7 @@ NSRect qt_mac_toNSRect(const QRect &rect);
 QRect qt_mac_toQRect(const NSRect &rect);
 
 QColor qt_mac_toQColor(const NSColor *color);
+QColor qt_mac_toQColor(CGColorRef color);
 
 
 // Creates a mutable shape, it's the caller's responsibility to release.
diff --git a/src/plugins/platforms/cocoa/qcocoahelpers.mm b/src/plugins/platforms/cocoa/qcocoahelpers.mm
index 9850f83dea..894c2c1168 100644
--- a/src/plugins/platforms/cocoa/qcocoahelpers.mm
+++ b/src/plugins/platforms/cocoa/qcocoahelpers.mm
@@ -97,13 +97,10 @@ CGImageRef qt_mac_toCGImage(const QImage &inImage)
     if (inImage.isNull())
         return 0;
 
-    QImage image = (inImage.depth() == 32) ? inImage : inImage.convertToFormat(QImage::Format_ARGB32_Premultiplied);
+    QImage image = inImage;
 
     uint cgflags = kCGImageAlphaNone;
     switch (image.format()) {
-    case QImage::Format_ARGB32_Premultiplied:
-        cgflags = kCGImageAlphaPremultipliedFirst | kCGBitmapByteOrder32Host;
-        break;
     case QImage::Format_ARGB32:
         cgflags = kCGImageAlphaFirst | kCGBitmapByteOrder32Host;
         break;
@@ -123,7 +120,11 @@ CGImageRef qt_mac_toCGImage(const QImage &inImage)
         cgflags = kCGImageAlphaNoneSkipLast | kCGBitmapByteOrder32Big;
         break;
     default:
-        Q_ASSERT(false); // Should never be reached.
+        // Everything not recognized explicitly is converted to ARGB32_Premultiplied.
+        image = inImage.convertToFormat(QImage::Format_ARGB32_Premultiplied);
+        // no break;
+    case QImage::Format_ARGB32_Premultiplied:
+        cgflags = kCGImageAlphaPremultipliedFirst | kCGBitmapByteOrder32Host;
         break;
     }
 
@@ -225,6 +226,24 @@ QColor qt_mac_toQColor(const NSColor *color)
     return qtColor;
 }
 
+QColor qt_mac_toQColor(CGColorRef color)
+{
+    QColor qtColor;
+    CGColorSpaceModel model = CGColorSpaceGetModel(CGColorGetColorSpace(color));
+    const CGFloat *components = CGColorGetComponents(color);
+    if (model == kCGColorSpaceModelRGB) {
+        qtColor.setRgbF(components[0], components[1], components[2], components[3]);
+    } else if (model == kCGColorSpaceModelCMYK) {
+        qtColor.setCmykF(components[0], components[1], components[2], components[3]);
+    } else if (model == kCGColorSpaceModelMonochrome) {
+        qtColor.setRgbF(components[0], components[0], components[0], components[1]);
+    } else {
+        // Colorspace we can't deal with.
+        qWarning("Qt: qt_mac_toQColor: cannot convert from colorspace model: %d", model);
+        Q_ASSERT(false);
+    }
+    return qtColor;
+}
 
 // Use this method to keep all the information in the TextSegment. As long as it is ordered
 // we are in OK shape, and we can influence that ourselves.
@@ -485,6 +504,18 @@ QString qt_mac_removeMnemonics(const QString &original)
             --l;
             if (l == 0)
                 break;
+        } else if (original.at(currPos) == QLatin1Char('(') && l >= 4 &&
+                   original.at(currPos + 1) == QLatin1Char('&') &&
+                   original.at(currPos + 2) != QLatin1Char('&') &&
+                   original.at(currPos + 3) == QLatin1Char(')')) {
+            /* remove mnemonics its format is "\s*(&X)" */
+            int n = 0;
+            while (finalDest > n && returnText.at(finalDest - n - 1).isSpace())
+                ++n;
+            finalDest -= n;
+            currPos += 4;
+            l -= 4;
+            continue;
         }
         returnText[finalDest] = original.at(currPos);
         ++currPos;
@@ -743,16 +774,7 @@ bool qt_mac_execute_apple_script(const QString &script, AEDesc *ret)
 
 QString qt_mac_removeAmpersandEscapes(QString s)
 {
-    int i = 0;
-    while (i < s.size()) {
-        ++i;
-        if (s.at(i-1) != QLatin1Char('&'))
-            continue;
-        if (i < s.size() && s.at(i) == QLatin1Char('&'))
-            ++i;
-        s.remove(i-1,1);
-    }
-    return s.trimmed();
+    return qt_mac_removeMnemonics(s).trimmed();
 }
 
 /*! \internal
diff --git a/src/plugins/platforms/cocoa/qcocoainputcontext.h b/src/plugins/platforms/cocoa/qcocoainputcontext.h
index 57e3cec9dc..cd3efcbd58 100644
--- a/src/plugins/platforms/cocoa/qcocoainputcontext.h
+++ b/src/plugins/platforms/cocoa/qcocoainputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaintegration.h b/src/plugins/platforms/cocoa/qcocoaintegration.h
index 07b73c1a7a..c867fc49d3 100644
--- a/src/plugins/platforms/cocoa/qcocoaintegration.h
+++ b/src/plugins/platforms/cocoa/qcocoaintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -113,7 +105,9 @@ public:
 
     bool hasCapability(QPlatformIntegration::Capability cap) const;
     QPlatformWindow *createPlatformWindow(QWindow *window) const;
+#ifndef QT_NO_OPENGL
     QPlatformOpenGLContext *createPlatformOpenGLContext(QOpenGLContext *context) const;
+#endif
     QPlatformBackingStore *createPlatformBackingStore(QWindow *widget) const;
 
     QAbstractEventDispatcher *createEventDispatcher() const;
diff --git a/src/plugins/platforms/cocoa/qcocoaintegration.mm b/src/plugins/platforms/cocoa/qcocoaintegration.mm
index 9fd05a65ee..e0838cb342 100644
--- a/src/plugins/platforms/cocoa/qcocoaintegration.mm
+++ b/src/plugins/platforms/cocoa/qcocoaintegration.mm
@@ -137,10 +137,9 @@ void QCocoaScreen::updateGeometry()
         m_name = QString::fromUtf8([[localizedNames objectForKey:[[localizedNames allKeys] objectAtIndex:0]] UTF8String]);
     [deviceInfo release];
 
-    QWindowSystemInterface::handleScreenGeometryChange(screen(), geometry());
+    QWindowSystemInterface::handleScreenGeometryChange(screen(), geometry(), availableGeometry());
     QWindowSystemInterface::handleScreenLogicalDotsPerInchChange(screen(), m_logicalDpi.first, m_logicalDpi.second);
     QWindowSystemInterface::handleScreenRefreshRateChange(screen(), m_refreshRate);
-    QWindowSystemInterface::handleScreenAvailableGeometryChange(screen(), availableGeometry());
 }
 
 qreal QCocoaScreen::devicePixelRatio() const
@@ -424,30 +423,37 @@ bool QCocoaIntegration::hasCapability(QPlatformIntegration::Capability cap) cons
 {
     switch (cap) {
     case ThreadedPixmaps:
+#ifndef QT_NO_OPENGL
     case OpenGL:
     case ThreadedOpenGL:
     case BufferQueueingOpenGL:
+#endif
     case WindowMasks:
     case MultipleWindows:
     case ForeignWindows:
     case RasterGLSurface:
+    case ApplicationState:
         return true;
     default:
         return QPlatformIntegration::hasCapability(cap);
     }
 }
 
-
-
 QPlatformWindow *QCocoaIntegration::createPlatformWindow(QWindow *window) const
 {
     return new QCocoaWindow(window);
 }
 
+#ifndef QT_NO_OPENGL
 QPlatformOpenGLContext *QCocoaIntegration::createPlatformOpenGLContext(QOpenGLContext *context) const
 {
-    return new QCocoaGLContext(context->format(), context->shareHandle());
+    QCocoaGLContext *glContext = new QCocoaGLContext(context->format(),
+                                                     context->shareHandle(),
+                                                     context->nativeHandle());
+    context->setNativeHandle(glContext->nativeHandle());
+    return glContext;
 }
+#endif
 
 QPlatformBackingStore *QCocoaIntegration::createPlatformBackingStore(QWindow *window) const
 {
diff --git a/src/plugins/platforms/cocoa/qcocoaintrospection.h b/src/plugins/platforms/cocoa/qcocoaintrospection.h
index 294efbd697..fe8acbbc2d 100644
--- a/src/plugins/platforms/cocoa/qcocoaintrospection.h
+++ b/src/plugins/platforms/cocoa/qcocoaintrospection.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoakeymapper.h b/src/plugins/platforms/cocoa/qcocoakeymapper.h
index 4f419b3651..54a4e14d01 100644
--- a/src/plugins/platforms/cocoa/qcocoakeymapper.h
+++ b/src/plugins/platforms/cocoa/qcocoakeymapper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoakeymapper.mm b/src/plugins/platforms/cocoa/qcocoakeymapper.mm
index e46eaff6be..93fbf3cb0f 100644
--- a/src/plugins/platforms/cocoa/qcocoakeymapper.mm
+++ b/src/plugins/platforms/cocoa/qcocoakeymapper.mm
@@ -213,22 +213,32 @@ static qt_mac_enum_mapper qt_mac_keyboard_symbols[] = {
 };
 
 static qt_mac_enum_mapper qt_mac_keyvkey_symbols[] = { //real scan codes
-    { 122, QT_MAC_MAP_ENUM(Qt::Key_F1) },
-    { 120, QT_MAC_MAP_ENUM(Qt::Key_F2) },
-    { 99,  QT_MAC_MAP_ENUM(Qt::Key_F3) },
-    { 118, QT_MAC_MAP_ENUM(Qt::Key_F4) },
-    { 96,  QT_MAC_MAP_ENUM(Qt::Key_F5) },
-    { 97,  QT_MAC_MAP_ENUM(Qt::Key_F6) },
-    { 98,  QT_MAC_MAP_ENUM(Qt::Key_F7) },
-    { 100, QT_MAC_MAP_ENUM(Qt::Key_F8) },
-    { 101, QT_MAC_MAP_ENUM(Qt::Key_F9) },
-    { 109, QT_MAC_MAP_ENUM(Qt::Key_F10) },
-    { 103, QT_MAC_MAP_ENUM(Qt::Key_F11) },
-    { 111, QT_MAC_MAP_ENUM(Qt::Key_F12) },
-    { 105, QT_MAC_MAP_ENUM(Qt::Key_F13) },
-    { 107, QT_MAC_MAP_ENUM(Qt::Key_F14) },
-    { 113, QT_MAC_MAP_ENUM(Qt::Key_F15) },
-    { 106, QT_MAC_MAP_ENUM(Qt::Key_F16) },
+    { kVK_F1, QT_MAC_MAP_ENUM(Qt::Key_F1) },
+    { kVK_F2, QT_MAC_MAP_ENUM(Qt::Key_F2) },
+    { kVK_F3, QT_MAC_MAP_ENUM(Qt::Key_F3) },
+    { kVK_F4, QT_MAC_MAP_ENUM(Qt::Key_F4) },
+    { kVK_F5, QT_MAC_MAP_ENUM(Qt::Key_F5) },
+    { kVK_F6, QT_MAC_MAP_ENUM(Qt::Key_F6) },
+    { kVK_F7, QT_MAC_MAP_ENUM(Qt::Key_F7) },
+    { kVK_F8, QT_MAC_MAP_ENUM(Qt::Key_F8) },
+    { kVK_F9, QT_MAC_MAP_ENUM(Qt::Key_F9) },
+    { kVK_F10, QT_MAC_MAP_ENUM(Qt::Key_F10) },
+    { kVK_F11, QT_MAC_MAP_ENUM(Qt::Key_F11) },
+    { kVK_F12, QT_MAC_MAP_ENUM(Qt::Key_F12) },
+    { kVK_F13, QT_MAC_MAP_ENUM(Qt::Key_F13) },
+    { kVK_F14, QT_MAC_MAP_ENUM(Qt::Key_F14) },
+    { kVK_F15, QT_MAC_MAP_ENUM(Qt::Key_F15) },
+    { kVK_F16, QT_MAC_MAP_ENUM(Qt::Key_F16) },
+    { kVK_Return, QT_MAC_MAP_ENUM(Qt::Key_Return) },
+    { kVK_Tab, QT_MAC_MAP_ENUM(Qt::Key_Tab) },
+    { kVK_Escape, QT_MAC_MAP_ENUM(Qt::Key_Escape) },
+    { kVK_Help, QT_MAC_MAP_ENUM(Qt::Key_Help) },
+    { kVK_UpArrow, QT_MAC_MAP_ENUM(Qt::Key_Up) },
+    { kVK_DownArrow, QT_MAC_MAP_ENUM(Qt::Key_Down) },
+    { kVK_LeftArrow, QT_MAC_MAP_ENUM(Qt::Key_Left) },
+    { kVK_RightArrow, QT_MAC_MAP_ENUM(Qt::Key_Right) },
+    { kVK_PageUp, QT_MAC_MAP_ENUM(Qt::Key_PageUp) },
+    { kVK_PageDown, QT_MAC_MAP_ENUM(Qt::Key_PageDown) },
     {   0, QT_MAC_MAP_ENUM(0) }
 };
 
diff --git a/src/plugins/platforms/cocoa/qcocoamenu.h b/src/plugins/platforms/cocoa/qcocoamenu.h
index a05d2a4a38..85913a67e1 100644
--- a/src/plugins/platforms/cocoa/qcocoamenu.h
+++ b/src/plugins/platforms/cocoa/qcocoamenu.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author James Turner <james.turner@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,7 +59,7 @@ public:
     void syncMenuItem(QPlatformMenuItem *menuItem);
     void setEnabled(bool enabled);
     void setVisible(bool visible);
-    void showPopup(const QWindow *parentWindow, QPoint pos, const QPlatformMenuItem *item);
+    void showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item);
     void dismiss();
 
     void syncSeparatorsCollapsible(bool enable);
diff --git a/src/plugins/platforms/cocoa/qcocoamenu.mm b/src/plugins/platforms/cocoa/qcocoamenu.mm
index fcf670d0ef..736e02a3ca 100644
--- a/src/plugins/platforms/cocoa/qcocoamenu.mm
+++ b/src/plugins/platforms/cocoa/qcocoamenu.mm
@@ -438,10 +438,11 @@ void QCocoaMenu::setVisible(bool visible)
     m_visible = visible;
 }
 
-void QCocoaMenu::showPopup(const QWindow *parentWindow, QPoint pos, const QPlatformMenuItem *item)
+void QCocoaMenu::showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item)
 {
     QCocoaAutoReleasePool pool;
 
+    QPoint pos =  QPoint(targetRect.left(), targetRect.top() + targetRect.height());
     QCocoaWindow *cocoaWindow = parentWindow ? static_cast<QCocoaWindow *>(parentWindow->handle()) : 0;
     NSView *view = cocoaWindow ? cocoaWindow->contentView() : nil;
     NSMenuItem *nsItem = item ? ((QCocoaMenuItem *)item)->nsItem() : nil;
diff --git a/src/plugins/platforms/cocoa/qcocoamenubar.h b/src/plugins/platforms/cocoa/qcocoamenubar.h
index fa02a7870b..c645a94b50 100644
--- a/src/plugins/platforms/cocoa/qcocoamenubar.h
+++ b/src/plugins/platforms/cocoa/qcocoamenubar.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author James Turner <james.turner@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoamenuitem.h b/src/plugins/platforms/cocoa/qcocoamenuitem.h
index 847064e6cf..4b94fa0020 100644
--- a/src/plugins/platforms/cocoa/qcocoamenuitem.h
+++ b/src/plugins/platforms/cocoa/qcocoamenuitem.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author James Turner <james.turner@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -86,6 +78,7 @@ public:
     void setCheckable(bool checkable) { Q_UNUSED(checkable) }
     void setChecked(bool isChecked);
     void setEnabled(bool isEnabled);
+    void setIconSize(int size);
 
     void setNativeContents(WId item);
 
@@ -124,6 +117,7 @@ private:
     bool m_checked;
     bool m_merged;
     quintptr m_tag;
+    int m_iconSize;
 };
 
 #define COCOA_MENU_ANCESTOR(m) ((m)->property("_qCocoaMenuAncestor").value<QObject *>())
diff --git a/src/plugins/platforms/cocoa/qcocoamenuitem.mm b/src/plugins/platforms/cocoa/qcocoamenuitem.mm
index f686c0a838..3d3b6bf598 100644
--- a/src/plugins/platforms/cocoa/qcocoamenuitem.mm
+++ b/src/plugins/platforms/cocoa/qcocoamenuitem.mm
@@ -100,7 +100,8 @@ QCocoaMenuItem::QCocoaMenuItem() :
     m_role(NoRole),
     m_checked(false),
     m_merged(false),
-    m_tag(0)
+    m_tag(0),
+    m_iconSize(16)
 {
 }
 
@@ -344,7 +345,7 @@ NSMenuItem *QCocoaMenuItem::sync()
     NSImage *img = nil;
     if (!m_icon.isNull()) {
         img = qt_mac_create_nsimage(m_icon);
-        [img setSize:NSMakeSize(16, 16)];
+        [img setSize:NSMakeSize(m_iconSize, m_iconSize)];
     }
     [m_native setImage:img];
     [img release];
@@ -415,3 +416,8 @@ QPlatformMenuItem::MenuRole QCocoaMenuItem::effectiveRole() const
     else
         return m_detectedRole;
 }
+
+void QCocoaMenuItem::setIconSize(int size)
+{
+    m_iconSize = size;
+}
diff --git a/src/plugins/platforms/cocoa/qcocoamenuloader.h b/src/plugins/platforms/cocoa/qcocoamenuloader.h
index e07da39995..0d81898e26 100644
--- a/src/plugins/platforms/cocoa/qcocoamenuloader.h
+++ b/src/plugins/platforms/cocoa/qcocoamenuloader.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoamimetypes.h b/src/plugins/platforms/cocoa/qcocoamimetypes.h
index 7b55e38525..77339e1ca5 100644
--- a/src/plugins/platforms/cocoa/qcocoamimetypes.h
+++ b/src/plugins/platforms/cocoa/qcocoamimetypes.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoanativeinterface.h b/src/plugins/platforms/cocoa/qcocoanativeinterface.h
index 54e45a1d99..81d4bbda1a 100644
--- a/src/plugins/platforms/cocoa/qcocoanativeinterface.h
+++ b/src/plugins/platforms/cocoa/qcocoanativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,15 +53,19 @@ class QCocoaNativeInterface : public QPlatformNativeInterface
 public:
     QCocoaNativeInterface();
 
+#ifndef QT_NO_OPENGL
     void *nativeResourceForContext(const QByteArray &resourceString, QOpenGLContext *context);
+#endif
     void *nativeResourceForWindow(const QByteArray &resourceString, QWindow *window);
 
     NativeResourceForIntegrationFunction nativeResourceFunctionForIntegration(const QByteArray &resource) Q_DECL_OVERRIDE;
 
     Q_INVOKABLE void beep();
 
+#ifndef QT_NO_OPENGL
     static void *cglContextForContext(QOpenGLContext *context);
     static void *nsOpenGLContextForContext(QOpenGLContext* context);
+#endif
 
 public Q_SLOTS:
     void onAppFocusWindowChanged(QWindow *window);
diff --git a/src/plugins/platforms/cocoa/qcocoanativeinterface.mm b/src/plugins/platforms/cocoa/qcocoanativeinterface.mm
index e09c31231d..7b314665de 100644
--- a/src/plugins/platforms/cocoa/qcocoanativeinterface.mm
+++ b/src/plugins/platforms/cocoa/qcocoanativeinterface.mm
@@ -40,7 +40,6 @@
 ****************************************************************************/
 
 #include "qcocoanativeinterface.h"
-#include "qcocoaglcontext.h"
 #include "qcocoawindow.h"
 #include "qcocoamenu.h"
 #include "qcocoamenubar.h"
@@ -53,8 +52,11 @@
 #include <qpixmap.h>
 #include <qpa/qplatformwindow.h>
 #include "qsurfaceformat.h"
+#ifndef QT_NO_OPENGL
 #include <qpa/qplatformopenglcontext.h>
 #include "qopenglcontext.h"
+#include "qcocoaglcontext.h"
+#endif
 #include "qguiapplication.h"
 #include <qdebug.h>
 
@@ -72,6 +74,7 @@ QCocoaNativeInterface::QCocoaNativeInterface()
 {
 }
 
+#ifndef QT_NO_OPENGL
 void *QCocoaNativeInterface::nativeResourceForContext(const QByteArray &resourceString, QOpenGLContext *context)
 {
     if (!context)
@@ -83,16 +86,19 @@ void *QCocoaNativeInterface::nativeResourceForContext(const QByteArray &resource
 
     return 0;
 }
+#endif
 
 void *QCocoaNativeInterface::nativeResourceForWindow(const QByteArray &resourceString, QWindow *window)
 {
     if (!window->handle())
         return 0;
 
-    if (resourceString == "nsopenglcontext") {
-        return static_cast<QCocoaWindow *>(window->handle())->currentContext()->nsOpenGLContext();
-    } else if (resourceString == "nsview") {
+    if (resourceString == "nsview") {
         return static_cast<QCocoaWindow *>(window->handle())->m_contentView;
+#ifndef QT_NO_OPENGL
+    } else if (resourceString == "nsopenglcontext") {
+        return static_cast<QCocoaWindow *>(window->handle())->currentContext()->nsOpenGLContext();
+#endif
     } else if (resourceString == "nswindow") {
         return static_cast<QCocoaWindow *>(window->handle())->m_nsWindow;
     }
@@ -198,6 +204,7 @@ void QCocoaNativeInterface::onAppFocusWindowChanged(QWindow *window)
     QCocoaMenuBar::updateMenuBarImmediately();
 }
 
+#ifndef QT_NO_OPENGL
 void *QCocoaNativeInterface::cglContextForContext(QOpenGLContext* context)
 {
     NSOpenGLContext *nsOpenGLContext = static_cast<NSOpenGLContext*>(nsOpenGLContextForContext(context));
@@ -216,6 +223,7 @@ void *QCocoaNativeInterface::nsOpenGLContextForContext(QOpenGLContext* context)
     }
     return 0;
 }
+#endif
 
 void QCocoaNativeInterface::addToMimeList(void *macPasteboardMime)
 {
diff --git a/src/plugins/platforms/cocoa/qcocoaprintdevice.h b/src/plugins/platforms/cocoa/qcocoaprintdevice.h
index 30a2155bc7..71ab2b9ba8 100644
--- a/src/plugins/platforms/cocoa/qcocoaprintdevice.h
+++ b/src/plugins/platforms/cocoa/qcocoaprintdevice.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaprintersupport.h b/src/plugins/platforms/cocoa/qcocoaprintersupport.h
index 61c1bfd3ec..8cf7cb14b9 100644
--- a/src/plugins/platforms/cocoa/qcocoaprintersupport.h
+++ b/src/plugins/platforms/cocoa/qcocoaprintersupport.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoaservices.h b/src/plugins/platforms/cocoa/qcocoaservices.h
index b451f54a66..5a2c269dfa 100644
--- a/src/plugins/platforms/cocoa/qcocoaservices.h
+++ b/src/plugins/platforms/cocoa/qcocoaservices.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoasystemsettings.h b/src/plugins/platforms/cocoa/qcocoasystemsettings.h
index 3861da6230..c13747ea17 100644
--- a/src/plugins/platforms/cocoa/qcocoasystemsettings.h
+++ b/src/plugins/platforms/cocoa/qcocoasystemsettings.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoasystemsettings.mm b/src/plugins/platforms/cocoa/qcocoasystemsettings.mm
index 67fa66ad63..3ce2f06763 100644
--- a/src/plugins/platforms/cocoa/qcocoasystemsettings.mm
+++ b/src/plugins/platforms/cocoa/qcocoasystemsettings.mm
@@ -41,6 +41,8 @@
 
 #include "qcocoasystemsettings.h"
 
+#include "qcocoahelpers.h"
+
 #include <QtCore/private/qcore_mac_p.h>
 #include <QtGui/qfont.h>
 
@@ -48,30 +50,11 @@
 
 QT_BEGIN_NAMESPACE
 
-QColor qt_mac_colorFromCGColor(CGColorRef cgcolor)
-{
-    QColor pc;
-    CGColorSpaceModel model = CGColorSpaceGetModel(CGColorGetColorSpace(cgcolor));
-    const CGFloat *components = CGColorGetComponents(cgcolor);
-    if (model == kCGColorSpaceModelRGB) {
-        pc.setRgbF(components[0], components[1], components[2], components[3]);
-    } else if (model == kCGColorSpaceModelCMYK) {
-        pc.setCmykF(components[0], components[1], components[2], components[3]);
-    } else if (model == kCGColorSpaceModelMonochrome) {
-        pc.setRgbF(components[0], components[0], components[0], components[1]);
-    } else {
-        // Colorspace we can't deal with.
-        qWarning("Qt: qcolorFromCGColor: cannot convert from colorspace model: %d", model);
-        Q_ASSERT(false);
-    }
-    return pc;
-}
-
 QColor qt_mac_colorForTheme(ThemeBrush brush)
 {
     QCFType<CGColorRef> cgClr = 0;
     HIThemeBrushCreateCGColor(brush, &cgClr);
-    return qt_mac_colorFromCGColor(cgClr);
+    return qt_mac_toQColor(cgClr);
 }
 
 QColor qt_mac_colorForThemeTextColor(ThemeTextColor themeColor)
diff --git a/src/plugins/platforms/cocoa/qcocoasystemtrayicon.h b/src/plugins/platforms/cocoa/qcocoasystemtrayicon.h
index 61a6ba3e2f..c527c478ff 100755
--- a/src/plugins/platforms/cocoa/qcocoasystemtrayicon.h
+++ b/src/plugins/platforms/cocoa/qcocoasystemtrayicon.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2012 Klaralvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoatheme.h b/src/plugins/platforms/cocoa/qcocoatheme.h
index d60cdf10d1..13c1868b92 100644
--- a/src/plugins/platforms/cocoa/qcocoatheme.h
+++ b/src/plugins/platforms/cocoa/qcocoatheme.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qcocoawindow.h b/src/plugins/platforms/cocoa/qcocoawindow.h
index 7a21f7a8d3..a43cf73d34 100644
--- a/src/plugins/platforms/cocoa/qcocoawindow.h
+++ b/src/plugins/platforms/cocoa/qcocoawindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -47,7 +39,9 @@
 #include <qpa/qplatformwindow.h>
 #include <QRect>
 
+#ifndef QT_NO_OPENGL
 #include "qcocoaglcontext.h"
+#endif
 #include "qnsview.h"
 #include "qt_mac_p.h"
 
@@ -201,8 +195,10 @@ public:
     void setWindowShadow(Qt::WindowFlags flags);
     void setWindowZoomButton(Qt::WindowFlags flags);
 
+#ifndef QT_NO_OPENGL
     void setCurrentContext(QCocoaGLContext *context);
     QCocoaGLContext *currentContext() const;
+#endif
 
     bool setWindowModified(bool modified) Q_DECL_OVERRIDE;
 
@@ -272,7 +268,9 @@ public: // for QNSView
 
     bool m_inConstructor;
     bool m_inSetVisible;
+#ifndef QT_NO_OPENGL
     QCocoaGLContext *m_glContext;
+#endif
     QCocoaMenuBar *m_menubar;
     NSCursor *m_windowCursor;
 
diff --git a/src/plugins/platforms/cocoa/qcocoawindow.mm b/src/plugins/platforms/cocoa/qcocoawindow.mm
index 96c882887e..a0e02501de 100644
--- a/src/plugins/platforms/cocoa/qcocoawindow.mm
+++ b/src/plugins/platforms/cocoa/qcocoawindow.mm
@@ -43,7 +43,9 @@
 #include "qnswindowdelegate.h"
 #include "qcocoaautoreleasepool.h"
 #include "qcocoaeventdispatcher.h"
+#ifndef QT_NO_OPENGL
 #include "qcocoaglcontext.h"
+#endif
 #include "qcocoahelpers.h"
 #include "qcocoanativeinterface.h"
 #include "qnsview.h"
@@ -399,7 +401,9 @@ QCocoaWindow::QCocoaWindow(QWindow *tlw)
     , m_windowUnderMouse(false)
     , m_inConstructor(true)
     , m_inSetVisible(false)
+#ifndef QT_NO_OPENGL
     , m_glContext(0)
+#endif
     , m_menubar(0)
     , m_windowCursor(0)
     , m_hasModalSession(false)
@@ -538,7 +542,7 @@ void QCocoaWindow::setCocoaGeometry(const QRect &rect)
 
         // call this here: updateGeometry in qnsview.mm is a no-op for this case
         QWindowSystemInterface::handleGeometryChange(window(), rect);
-        QWindowSystemInterface::handleExposeEvent(window(), rect);
+        QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), rect.size()));
     } else if (m_nsWindow) {
         NSRect bounds = qt_mac_flipRect(rect);
         [m_nsWindow setFrame:[m_nsWindow frameRectForContentRect:bounds] display:YES animate:NO];
@@ -741,8 +745,10 @@ void QCocoaWindow::setVisible(bool visible)
             [m_contentView setHidden:NO];
     } else {
         // qDebug() << "close" << this;
+#ifndef QT_NO_OPENGL
         if (m_glContext)
             m_glContext->windowWasHidden();
+#endif
         QCocoaEventDispatcher *cocoaEventDispatcher = qobject_cast<QCocoaEventDispatcher *>(QGuiApplication::instance()->eventDispatcher());
         QCocoaEventDispatcherPrivate *cocoaEventDispatcherPrivate = 0;
         if (cocoaEventDispatcher)
@@ -1253,6 +1259,7 @@ bool QCocoaWindow::windowIsPopupType(Qt::WindowType type) const
     return ((type & Qt::Popup) == Qt::Popup);
 }
 
+#ifndef QT_NO_OPENGL
 void QCocoaWindow::setCurrentContext(QCocoaGLContext *context)
 {
     m_glContext = context;
@@ -1262,6 +1269,7 @@ QCocoaGLContext *QCocoaWindow::currentContext() const
 {
     return m_glContext;
 }
+#endif
 
 void QCocoaWindow::recreateWindow(const QPlatformWindow *parentWindow)
 {
@@ -1774,7 +1782,7 @@ void QCocoaWindow::exposeWindow()
         m_isExposed = true;
         m_exposedGeometry = geometry();
         m_exposedDevicePixelRatio = devicePixelRatio();
-        QWindowSystemInterface::handleExposeEvent(window(), QRegion(geometry()));
+        QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), m_exposedGeometry.size()));
     }
 }
 
@@ -1805,7 +1813,7 @@ void QCocoaWindow::updateExposedGeometry()
     m_isExposed = true;
     m_exposedGeometry = geometry();
     m_exposedDevicePixelRatio = devicePixelRatio();
-    QWindowSystemInterface::handleExposeEvent(window(), QRegion(geometry()));
+    QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), m_exposedGeometry.size()));
 }
 
 QWindow *QCocoaWindow::childWindowAt(QPoint windowPoint)
diff --git a/src/plugins/platforms/cocoa/qmacclipboard.h b/src/plugins/platforms/cocoa/qmacclipboard.h
index ddaa61a84d..ba7a2e1aac 100644
--- a/src/plugins/platforms/cocoa/qmacclipboard.h
+++ b/src/plugins/platforms/cocoa/qmacclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qmacdefines_mac.h b/src/plugins/platforms/cocoa/qmacdefines_mac.h
index c03b398836..36dcd016db 100644
--- a/src/plugins/platforms/cocoa/qmacdefines_mac.h
+++ b/src/plugins/platforms/cocoa/qmacdefines_mac.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qmultitouch_mac_p.h b/src/plugins/platforms/cocoa/qmultitouch_mac_p.h
index 736eb3f878..7f1a0a2947 100644
--- a/src/plugins/platforms/cocoa/qmultitouch_mac_p.h
+++ b/src/plugins/platforms/cocoa/qmultitouch_mac_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qnsview.h b/src/plugins/platforms/cocoa/qnsview.h
index 44a1556fc4..8b23f84a25 100644
--- a/src/plugins/platforms/cocoa/qnsview.h
+++ b/src/plugins/platforms/cocoa/qnsview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,8 +66,10 @@ Q_FORWARD_DECLARE_OBJC_CLASS(QNSViewMouseMoveHelper);
     bool m_sendUpAsRightButton;
     Qt::KeyboardModifiers currentWheelModifiers;
     bool m_subscribesForGlobalFrameNotifications;
+#ifndef QT_NO_OPENGL
     QCocoaGLContext *m_glContext;
     bool m_shouldSetGLContextinDrawRect;
+#endif
     NSString *m_inputSource;
     QNSViewMouseMoveHelper *m_mouseMoveHelper;
     bool m_resendKeyEvent;
@@ -83,7 +77,9 @@ Q_FORWARD_DECLARE_OBJC_CLASS(QNSViewMouseMoveHelper);
 
 - (id)init;
 - (id)initWithQWindow:(QWindow *)window platformWindow:(QCocoaWindow *) platformWindow;
+#ifndef QT_NO_OPENGL
 - (void)setQCocoaGLContext:(QCocoaGLContext *)context;
+#endif
 - (void)flushBackingStore:(QCocoaBackingStore *)backingStore region:(const QRegion &)region offset:(QPoint)offset;
 - (void)setMaskRegion:(const QRegion *)region;
 - (void)invalidateWindowShadowIfNeeded;
diff --git a/src/plugins/platforms/cocoa/qnsview.mm b/src/plugins/platforms/cocoa/qnsview.mm
index a4671845b7..73f8d276a8 100644
--- a/src/plugins/platforms/cocoa/qnsview.mm
+++ b/src/plugins/platforms/cocoa/qnsview.mm
@@ -57,13 +57,21 @@
 #include <QtCore/QDebug>
 #include <private/qguiapplication_p.h>
 #include "qcocoabackingstore.h"
+#ifndef QT_NO_OPENGL
 #include "qcocoaglcontext.h"
+#endif
 #include "qcocoaintegration.h"
 
 #ifdef QT_COCOA_ENABLE_ACCESSIBILITY_INSPECTOR
 #include <accessibilityinspector.h>
 #endif
 
+Q_LOGGING_CATEGORY(lcQpaTouch, "qt.qpa.input.touch")
+#ifndef QT_NO_GESTURES
+Q_LOGGING_CATEGORY(lcQpaGestures, "qt.qpa.input.gestures")
+#endif
+Q_LOGGING_CATEGORY(lcQpaTablet, "qt.qpa.input.tablet")
+
 static QTouchDevice *touchDevice = 0;
 
 // ### HACK Remove once 10.8 is unsupported
@@ -143,8 +151,10 @@ static NSString *_q_NSWindowDidChangeOcclusionStateNotification = nil;
         m_frameStrutButtons = Qt::NoButton;
         m_sendKeyEvent = false;
         m_subscribesForGlobalFrameNotifications = false;
+#ifndef QT_NO_OPENGL
         m_glContext = 0;
         m_shouldSetGLContextinDrawRect = false;
+#endif
         currentCustomDragTypes = 0;
         m_sendUpAsRightButton = false;
         m_inputSource = 0;
@@ -211,6 +221,7 @@ static NSString *_q_NSWindowDidChangeOcclusionStateNotification = nil;
     return self;
 }
 
+#ifndef QT_NO_OPENGL
 - (void) setQCocoaGLContext:(QCocoaGLContext *)context
 {
     m_glContext = context;
@@ -232,6 +243,7 @@ static NSString *_q_NSWindowDidChangeOcclusionStateNotification = nil;
             object:self];
     }
 }
+#endif
 
 - (void) globalFrameChanged:(NSNotification*)notification
 {
@@ -517,10 +529,12 @@ static NSString *_q_NSWindowDidChangeOcclusionStateNotification = nil;
 
 - (void) drawRect:(NSRect)dirtyRect
 {
+#ifndef QT_NO_OPENGL
     if (m_glContext && m_shouldSetGLContextinDrawRect) {
         [m_glContext->nsOpenGLContext() setView:self];
         m_shouldSetGLContextinDrawRect = false;
     }
+#endif
 
     if (m_platformWindow->m_drawContentBorderGradient)
         NSDrawWindowBackground(dirtyRect);
@@ -989,6 +1003,7 @@ Q_GLOBAL_STATIC(QCocoaTabletDeviceDataHash, tabletDeviceDataHash)
     NSPoint tilt = [theEvent tilt];
     int xTilt = qRound(tilt.x * 60.0);
     int yTilt = qRound(tilt.y * -60.0);
+    Qt::MouseButtons buttons = static_cast<Qt::MouseButtons>(static_cast<uint>([theEvent buttonMask]));
     qreal tangentialPressure = 0;
     qreal rotation = 0;
     int z = 0;
@@ -996,14 +1011,21 @@ Q_GLOBAL_STATIC(QCocoaTabletDeviceDataHash, tabletDeviceDataHash)
         z = [theEvent absoluteZ];
 
     if (deviceData.capabilityMask & 0x0800)
-        tangentialPressure = [theEvent tangentialPressure];
+        tangentialPressure = ([theEvent tangentialPressure] * 2.0) - 1.0;
 
-    rotation = [theEvent rotation];
+    rotation = 360.0 - [theEvent rotation];
+    if (rotation > 180.0)
+        rotation -= 360.0;
 
     Qt::KeyboardModifiers keyboardModifiers = [QNSView convertKeyModifiers:[theEvent modifierFlags]];
 
-    QWindowSystemInterface::handleTabletEvent(m_window, timestamp, down, windowPoint, screenPoint,
-                                              deviceData.device, deviceData.pointerType, pressure, xTilt, yTilt,
+    qCDebug(lcQpaTablet, "event on tablet %d with tool %d type %d unique ID %lld pos %6.1f, %6.1f root pos %6.1f, %6.1f buttons 0x%x pressure %4.2lf tilt %d, %d rotation %6.2lf",
+        deviceId, deviceData.device, deviceData.pointerType, deviceData.uid,
+        windowPoint.x(), windowPoint.y(), screenPoint.x(), screenPoint.y(),
+        static_cast<uint>(buttons), pressure, xTilt, yTilt, rotation);
+
+    QWindowSystemInterface::handleTabletEvent(m_window, timestamp, windowPoint, screenPoint,
+                                              deviceData.device, deviceData.pointerType, buttons, pressure, xTilt, yTilt,
                                               tangentialPressure, rotation, z, deviceData.uid,
                                               keyboardModifiers);
 }
@@ -1095,6 +1117,9 @@ static QTabletEvent::TabletDevice wacomTabletDevice(NSEvent *theEvent)
         tabletDeviceDataHash->remove(deviceId);
     }
 
+    qCDebug(lcQpaTablet, "proximity change on tablet %d: current tool %d type %d unique ID %lld",
+        deviceId, deviceData.device, deviceData.pointerType, deviceData.uid);
+
     if (entering) {
         QWindowSystemInterface::handleTabletEnterProximityEvent(timestamp, deviceData.device, deviceData.pointerType, deviceData.uid);
     } else {
@@ -1102,41 +1127,49 @@ static QTabletEvent::TabletDevice wacomTabletDevice(NSEvent *theEvent)
     }
 }
 
+- (bool) shouldSendSingleTouch
+{
+    // QtWidgets expects single-point touch events, QtDeclarative does not.
+    // Until there is an API we solve this by looking at the window class type.
+    return m_window->inherits("QWidgetWindow");
+}
+
 - (void)touchesBeganWithEvent:(NSEvent *)event
 {
     const NSTimeInterval timestamp = [event timestamp];
-    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, /*acceptSingleTouch= ### true or false?*/false);
+    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, [self shouldSendSingleTouch]);
+    qCDebug(lcQpaTouch) << "touchesBeganWithEvent" << points;
     QWindowSystemInterface::handleTouchEvent(m_window, timestamp * 1000, touchDevice, points);
 }
 
 - (void)touchesMovedWithEvent:(NSEvent *)event
 {
     const NSTimeInterval timestamp = [event timestamp];
-    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, /*acceptSingleTouch= ### true or false?*/false);
+    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, [self shouldSendSingleTouch]);
+    qCDebug(lcQpaTouch) << "touchesMovedWithEvent" << points;
     QWindowSystemInterface::handleTouchEvent(m_window, timestamp * 1000, touchDevice, points);
 }
 
 - (void)touchesEndedWithEvent:(NSEvent *)event
 {
     const NSTimeInterval timestamp = [event timestamp];
-    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, /*acceptSingleTouch= ### true or false?*/false);
+    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, [self shouldSendSingleTouch]);
+    qCDebug(lcQpaTouch) << "touchesEndedWithEvent" << points;
     QWindowSystemInterface::handleTouchEvent(m_window, timestamp * 1000, touchDevice, points);
 }
 
 - (void)touchesCancelledWithEvent:(NSEvent *)event
 {
     const NSTimeInterval timestamp = [event timestamp];
-    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, /*acceptSingleTouch= ### true or false?*/false);
+    const QList<QWindowSystemInterface::TouchPoint> points = QCocoaTouch::getCurrentTouchPointList(event, [self shouldSendSingleTouch]);
+    qCDebug(lcQpaTouch) << "touchesCancelledWithEvent" << points;
     QWindowSystemInterface::handleTouchEvent(m_window, timestamp * 1000, touchDevice, points);
 }
 
 #ifndef QT_NO_GESTURES
-//#define QT_COCOA_ENABLE_GESTURE_DEBUG
 - (void)magnifyWithEvent:(NSEvent *)event
 {
-#ifdef QT_COCOA_ENABLE_GESTURE_DEBUG
-    qDebug() << "magnifyWithEvent" << [event magnification];
-#endif
+    qCDebug(lcQpaGestures) << "magnifyWithEvent" << [event magnification];
     const NSTimeInterval timestamp = [event timestamp];
     QPointF windowPoint;
     QPointF screenPoint;
@@ -1149,9 +1182,7 @@ static QTabletEvent::TabletDevice wacomTabletDevice(NSEvent *theEvent)
 - (void)smartMagnifyWithEvent:(NSEvent *)event
 {
     static bool zoomIn = true;
-#ifdef QT_COCOA_ENABLE_GESTURE_DEBUG
-    qDebug() << "smartMagnifyWithEvent" << zoomIn;
-#endif
+    qCDebug(lcQpaGestures) << "smartMagnifyWithEvent" << zoomIn;
     const NSTimeInterval timestamp = [event timestamp];
     QPointF windowPoint;
     QPointF screenPoint;
@@ -1164,9 +1195,7 @@ static QTabletEvent::TabletDevice wacomTabletDevice(NSEvent *theEvent)
 
 - (void)rotateWithEvent:(NSEvent *)event
 {
-#ifdef QT_COCOA_ENABLE_GESTURE_DEBUG
-    qDebug() << "rotateWithEvent" << [event rotation];
-#endif
+    qCDebug(lcQpaGestures) << "rotateWithEvent" << [event rotation];
     const NSTimeInterval timestamp = [event timestamp];
     QPointF windowPoint;
     QPointF screenPoint;
@@ -1177,9 +1206,7 @@ static QTabletEvent::TabletDevice wacomTabletDevice(NSEvent *theEvent)
 
 - (void)swipeWithEvent:(NSEvent *)event
 {
-#ifdef QT_COCOA_ENABLE_GESTURE_DEBUG
-    qDebug() << "swipeWithEvent" << [event deltaX] << [event deltaY];
-#endif
+    qCDebug(lcQpaGestures) << "swipeWithEvent" << [event deltaX] << [event deltaY];
     const NSTimeInterval timestamp = [event timestamp];
     QPointF windowPoint;
     QPointF screenPoint;
@@ -1201,22 +1228,18 @@ static QTabletEvent::TabletDevice wacomTabletDevice(NSEvent *theEvent)
 
 - (void)beginGestureWithEvent:(NSEvent *)event
 {
-#ifdef QT_COCOA_ENABLE_GESTURE_DEBUG
-    qDebug() << "beginGestureWithEvent";
-#endif
     const NSTimeInterval timestamp = [event timestamp];
     QPointF windowPoint;
     QPointF screenPoint;
     [self convertFromScreen:[NSEvent mouseLocation] toWindowPoint:&windowPoint andScreenPoint:&screenPoint];
+    qCDebug(lcQpaGestures) << "beginGestureWithEvent @" << windowPoint;
     QWindowSystemInterface::handleGestureEvent(m_window, timestamp, Qt::BeginNativeGesture,
                                                windowPoint, screenPoint);
 }
 
 - (void)endGestureWithEvent:(NSEvent *)event
 {
-#ifdef QT_COCOA_ENABLE_GESTURE_DEBUG
-    qDebug() << "endGestureWithEvent";
-#endif
+    qCDebug(lcQpaGestures) << "endGestureWithEvent";
     const NSTimeInterval timestamp = [event timestamp];
     QPointF windowPoint;
     QPointF screenPoint;
diff --git a/src/plugins/platforms/cocoa/qnsviewaccessibility.mm b/src/plugins/platforms/cocoa/qnsviewaccessibility.mm
index d18a01b11c..a02b074771 100644
--- a/src/plugins/platforms/cocoa/qnsviewaccessibility.mm
+++ b/src/plugins/platforms/cocoa/qnsviewaccessibility.mm
@@ -59,7 +59,7 @@
         return nil;
 
     QAccessible::Id childId = QAccessible::uniqueId(m_window->accessibleRoot());
-    return [QCocoaAccessibleElement elementWithId: childId];
+    return [QMacAccessibilityElement elementWithId: childId];
 }
 
 // The QNSView is a container that the user does not interact directly with:
diff --git a/src/plugins/platforms/cocoa/qnswindowdelegate.h b/src/plugins/platforms/cocoa/qnswindowdelegate.h
index 083466861b..7dc4db8542 100644
--- a/src/plugins/platforms/cocoa/qnswindowdelegate.h
+++ b/src/plugins/platforms/cocoa/qnswindowdelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qpaintengine_mac.mm b/src/plugins/platforms/cocoa/qpaintengine_mac.mm
index f4cd071ab7..d48cbdfac8 100644
--- a/src/plugins/platforms/cocoa/qpaintengine_mac.mm
+++ b/src/plugins/platforms/cocoa/qpaintengine_mac.mm
@@ -1084,6 +1084,10 @@ void QCoreGraphicsPaintEngine::drawTextItem(const QPointF &pos, const QTextItem
     if (textAA != lineAA)
         CGContextSetShouldAntialias(d->hd, textAA);
 
+    const bool smoothing = textAA && !(fe->fontDef.styleStrategy & QFont::NoSubpixelAntialias);
+    if (d->disabledSmoothFonts == smoothing)
+        CGContextSetShouldSmoothFonts(d->hd, smoothing);
+
     if (ti.glyphs.numGlyphs) {
         switch (fe->type()) {
         case QFontEngine::Mac:
@@ -1100,6 +1104,9 @@ void QCoreGraphicsPaintEngine::drawTextItem(const QPointF &pos, const QTextItem
     if (textAA != lineAA)
         CGContextSetShouldAntialias(d->hd, !textAA);
 
+    if (smoothing == d->disabledSmoothFonts)
+        CGContextSetShouldSmoothFonts(d->hd, !d->disabledSmoothFonts);
+
     updatePen(oldPen);
     updateBrush(oldBrush, oldBrushOrigin);
 }
diff --git a/src/plugins/platforms/cocoa/qpaintengine_mac_p.h b/src/plugins/platforms/cocoa/qpaintengine_mac_p.h
index 08ede4cdd6..6a6537a89e 100644
--- a/src/plugins/platforms/cocoa/qpaintengine_mac_p.h
+++ b/src/plugins/platforms/cocoa/qpaintengine_mac_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qprintengine_mac_p.h b/src/plugins/platforms/cocoa/qprintengine_mac_p.h
index 12a87b35e9..c7307688ae 100644
--- a/src/plugins/platforms/cocoa/qprintengine_mac_p.h
+++ b/src/plugins/platforms/cocoa/qprintengine_mac_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/cocoa/qt_mac_p.h b/src/plugins/platforms/cocoa/qt_mac_p.h
index 7d38b08d84..1ab5ea55cd 100644
--- a/src/plugins/platforms/cocoa/qt_mac_p.h
+++ b/src/plugins/platforms/cocoa/qt_mac_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/direct2d.pro b/src/plugins/platforms/direct2d/direct2d.pro
index 03997f2737..8f2ccc3aa6 100644
--- a/src/plugins/platforms/direct2d/direct2d.pro
+++ b/src/plugins/platforms/direct2d/direct2d.pro
@@ -9,7 +9,7 @@ QT *= core-private
 QT *= gui-private
 QT *= platformsupport-private
 
-LIBS *= -ld2d1 -ld3d11 -ldwrite -lVersion
+LIBS *= -ld2d1 -ld3d11 -ldwrite -lVersion -lgdi32
 
 include(../windows/windows.pri)
 
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.cpp
index be013f027b..82f60a94c1 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -49,6 +41,7 @@
 
 #include "qwindowscontext.h"
 
+#include <QtGui/QPainter>
 #include <QtGui/QWindow>
 #include <QtCore/QDebug>
 
@@ -85,9 +78,18 @@ QWindowsDirect2DBackingStore::~QWindowsDirect2DBackingStore()
 {
 }
 
-void QWindowsDirect2DBackingStore::beginPaint(const QRegion &)
+void QWindowsDirect2DBackingStore::beginPaint(const QRegion &region)
 {
-    bitmap(nativeWindow(window())->pixmap())->deviceContext()->begin();
+    QPixmap *pixmap = nativeWindow(window())->pixmap();
+    bitmap(pixmap)->deviceContext()->begin();
+
+    QPainter painter(pixmap);
+    QColor clear(Qt::transparent);
+
+    painter.setCompositionMode(QPainter::CompositionMode_Source);
+
+    foreach (const QRect &r, region.rects())
+        painter.fillRect(r, clear);
 }
 
 void QWindowsDirect2DBackingStore::endPaint()
@@ -107,7 +109,7 @@ void QWindowsDirect2DBackingStore::flush(QWindow *targetWindow, const QRegion &r
         nativeWindow(targetWindow)->flush(copy.data(), region, offset);
     }
 
-    nativeWindow(targetWindow)->present();
+    nativeWindow(targetWindow)->present(region);
 }
 
 void QWindowsDirect2DBackingStore::resize(const QSize &size, const QRegion &region)
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.h b/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.h
index 71e9437274..874ae7fc0c 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dbackingstore.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.cpp
index 8bfeac0b2a..7cc30c8790 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.h b/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.h
index de63bc77f7..a695db8b49 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dbitmap.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.cpp
index d757789935..0501e4f948 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.h b/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.h
index f9ccab5783..d92bfb3e6f 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dcontext.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.cpp
index f2400cf8fc..23e6118132 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -133,4 +125,38 @@ bool QWindowsDirect2DDeviceContext::end()
     return d->end();
 }
 
+void QWindowsDirect2DDeviceContext::suspend()
+{
+    Q_D(QWindowsDirect2DDeviceContext);
+    if (d->refCount > 0)
+        d->deviceContext->EndDraw();
+}
+
+void QWindowsDirect2DDeviceContext::resume()
+{
+    Q_D(QWindowsDirect2DDeviceContext);
+    if (d->refCount > 0)
+        d->deviceContext->BeginDraw();
+}
+
+QWindowsDirect2DDeviceContextSuspender::QWindowsDirect2DDeviceContextSuspender(QWindowsDirect2DDeviceContext *dc)
+    : m_dc(dc)
+{
+    Q_ASSERT(m_dc);
+    m_dc->suspend();
+}
+
+QWindowsDirect2DDeviceContextSuspender::~QWindowsDirect2DDeviceContextSuspender()
+{
+    resume();
+}
+
+void QWindowsDirect2DDeviceContextSuspender::resume()
+{
+    if (m_dc) {
+        m_dc->resume();
+        m_dc = Q_NULLPTR;
+    }
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.h b/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.h
index c563f6a8f0..458f8a2598 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2ddevicecontext.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,6 +69,7 @@ class QWindowsDirect2DDeviceContextPrivate;
 class QWindowsDirect2DDeviceContext
 {
     Q_DECLARE_PRIVATE(QWindowsDirect2DDeviceContext)
+    friend class QWindowsDirect2DDeviceContextSuspender;
 public:
     QWindowsDirect2DDeviceContext(ID2D1DeviceContext *dc);
     ~QWindowsDirect2DDeviceContext();
@@ -87,9 +80,23 @@ public:
     bool end();
 
 private:
+    void suspend();
+    void resume();
+
     QScopedPointer<QWindowsDirect2DDeviceContextPrivate> d_ptr;
 };
 
+class QWindowsDirect2DDeviceContextSuspender {
+    Q_DISABLE_COPY(QWindowsDirect2DDeviceContextSuspender)
+
+    QWindowsDirect2DDeviceContext *m_dc;
+public:
+    QWindowsDirect2DDeviceContextSuspender(QWindowsDirect2DDeviceContext *dc);
+    ~QWindowsDirect2DDeviceContextSuspender();
+
+    void resume();
+};
+
 QT_END_NAMESPACE
 
 #endif // QWINDOWSDIRECT2DDEVICECONTEXT_H
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dhelpers.h b/src/plugins/platforms/direct2d/qwindowsdirect2dhelpers.h
index c1b7fc97a8..e281da798d 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dhelpers.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dhelpers.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.cpp
index 0e38f9b12a..142362a065 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.h b/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.h
index 0a5a7ff58a..b410464372 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dintegration.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.cpp
index 0020a95a4d..80da5c2f93 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.h b/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.h
index ee1e3db3d2..6e1b22c883 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dnativeinterface.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.cpp
index f5f4923b2f..da09ff83e3 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,8 +45,9 @@ QT_BEGIN_NAMESPACE
 class QWindowsDirect2DPaintDevicePrivate
 {
 public:
-    QWindowsDirect2DPaintDevicePrivate(QWindowsDirect2DBitmap *bitmap, QInternal::PaintDeviceFlags f)
-        : engine(new QWindowsDirect2DPaintEngine(bitmap))
+    QWindowsDirect2DPaintDevicePrivate(QWindowsDirect2DBitmap *bitmap, QInternal::PaintDeviceFlags f,
+                                       QWindowsDirect2DPaintEngine::Flags paintFlags)
+        : engine(new QWindowsDirect2DPaintEngine(bitmap, paintFlags))
         , bitmap(bitmap)
         , flags(f)
     {}
@@ -64,8 +57,9 @@ public:
     QInternal::PaintDeviceFlags flags;
 };
 
-QWindowsDirect2DPaintDevice::QWindowsDirect2DPaintDevice(QWindowsDirect2DBitmap *bitmap, QInternal::PaintDeviceFlags flags)
-    : d_ptr(new QWindowsDirect2DPaintDevicePrivate(bitmap, flags))
+QWindowsDirect2DPaintDevice::QWindowsDirect2DPaintDevice(QWindowsDirect2DBitmap *bitmap, QInternal::PaintDeviceFlags flags,
+                                                         QWindowsDirect2DPaintEngine::Flags paintFlags)
+    : d_ptr(new QWindowsDirect2DPaintDevicePrivate(bitmap, flags, paintFlags))
 {
 }
 
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.h b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.h
index c9d8607497..72cfd50153 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintdevice.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 
 #include <QtCore/QScopedPointer>
 #include <QtGui/QPaintDevice>
+#include "qwindowsdirect2dpaintengine.h"
 
 QT_BEGIN_NAMESPACE
 
@@ -55,7 +48,8 @@ class QWindowsDirect2DPaintDevice : public QPaintDevice
     Q_DECLARE_PRIVATE(QWindowsDirect2DPaintDevice)
 
 public:
-    QWindowsDirect2DPaintDevice(QWindowsDirect2DBitmap *bitmap, QInternal::PaintDeviceFlags flags);
+    QWindowsDirect2DPaintDevice(QWindowsDirect2DBitmap *bitmap, QInternal::PaintDeviceFlags flags,
+                                QWindowsDirect2DPaintEngine::Flags paintFlags = QWindowsDirect2DPaintEngine::NoFlag);
     QPaintEngine *paintEngine() const Q_DECL_OVERRIDE;
     int devType() const Q_DECL_OVERRIDE;
 
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.cpp
index 4c39560cbe..c13f0f333a 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,11 +40,12 @@
 #include "qwindowsdirect2ddevicecontext.h"
 
 #include "qwindowsfontengine.h"
-#include "qwindowsfontenginedirectwrite.h"
 #include "qwindowsfontdatabase.h"
 #include "qwindowsintegration.h"
 
+#include <QtCore/QtMath>
 #include <QtCore/QStack>
+#include <QtCore/QSettings>
 #include <QtGui/private/qpaintengine_p.h>
 #include <QtGui/private/qtextengine_p.h>
 #include <QtGui/private/qfontengine_p.h>
@@ -109,6 +102,16 @@ static inline ID2D1Factory1 *factory()
     return QWindowsDirect2DContext::instance()->d2dFactory();
 }
 
+static inline D2D1_MATRIX_3X2_F transformFromLine(const QLineF &line, qreal penWidth)
+{
+    const qreal halfWidth = penWidth / 2;
+    const qreal angle = -qDegreesToRadians(line.angle());
+    QTransform transform = QTransform::fromTranslate(line.p1().x() + qSin(angle) * halfWidth,
+                                                     line.p1().y() - qCos(angle) * halfWidth);
+    transform.rotateRadians(angle);
+    return to_d2d_matrix_3x2_f(transform);
+}
+
 class Direct2DPathGeometryWriter
 {
 public:
@@ -226,9 +229,10 @@ class QWindowsDirect2DPaintEnginePrivate : public QPaintEngineExPrivate
 {
     Q_DECLARE_PUBLIC(QWindowsDirect2DPaintEngine)
 public:
-    QWindowsDirect2DPaintEnginePrivate(QWindowsDirect2DBitmap *bm)
+    QWindowsDirect2DPaintEnginePrivate(QWindowsDirect2DBitmap *bm, QWindowsDirect2DPaintEngine::Flags flags)
         : bitmap(bm)
         , clipFlags(0)
+        , flags(flags)
     {
         pen.reset();
         brush.reset();
@@ -237,25 +241,29 @@ public:
     }
 
     QWindowsDirect2DBitmap *bitmap;
+    QImage fallbackImage;
 
     unsigned int clipFlags;
     QStack<ClipType> pushedClips;
+    QWindowsDirect2DPaintEngine::Flags flags;
 
     QPointF currentBrushOrigin;
 
-    QHash< QFont, ComPtr<IDWriteFontFace> > fontCache;
+    QHash< QFontDef, ComPtr<IDWriteFontFace> > fontCache;
 
     struct {
         bool emulate;
         QPen qpen;
         ComPtr<ID2D1Brush> brush;
         ComPtr<ID2D1StrokeStyle1> strokeStyle;
+        ComPtr<ID2D1BitmapBrush1> dashBrush;
 
         inline void reset() {
             emulate = false;
             qpen = QPen();
             brush.Reset();
             strokeStyle.Reset();
+            dashBrush.Reset();
         }
     } pen;
 
@@ -291,6 +299,14 @@ public:
                                                                   : D2D1_ANTIALIAS_MODE_ALIASED;
     }
 
+    inline D2D1_LAYER_OPTIONS1 layerOptions() const
+    {
+        if (flags & QWindowsDirect2DPaintEngine::TranslucentTopLevelWindow)
+            return D2D1_LAYER_OPTIONS1_NONE;
+        else
+            return D2D1_LAYER_OPTIONS1_INITIALIZE_FROM_BACKGROUND;
+    }
+
     void updateTransform(const QTransform &transform)
     {
         dc()->SetTransform(to_d2d_matrix_3x2_f(transform));
@@ -336,7 +352,7 @@ public:
                                                    D2D1::IdentityMatrix(),
                                                    1.0,
                                                    NULL,
-                                                   D2D1_LAYER_OPTIONS1_INITIALIZE_FROM_BACKGROUND),
+                                                   layerOptions()),
                             NULL);
             pushedClips.push(LayerClip);
         }
@@ -391,7 +407,10 @@ public:
             break;
 
         default:
-            qWarning("Unsupported composition mode: %d", mode);
+            // Activating an unsupported mode at any time will cause the QImage
+            // fallback to be used for the remainder of the active paint session
+            dc()->SetPrimitiveBlend(D2D1_PRIMITIVE_BLEND_COPY);
+            flags |= QWindowsDirect2DPaintEngine::EmulateComposition;
             break;
         }
     }
@@ -522,12 +541,31 @@ public:
         if (props.dashStyle == D2D1_DASH_STYLE_CUSTOM) {
             QVector<qreal> dashes = newPen.dashPattern();
             QVector<FLOAT> converted(dashes.size());
-
+            qreal penWidth = pen.qpen.widthF();
+            qreal brushWidth = 0;
             for (int i = 0; i < dashes.size(); i++) {
                 converted[i] = dashes[i];
+                brushWidth += penWidth * dashes[i];
             }
 
             hr = factory()->CreateStrokeStyle(props, converted.constData(), converted.size(), &pen.strokeStyle);
+
+            // Create a combined brush/dash pattern for optimized line drawing
+            QWindowsDirect2DBitmap bitmap;
+            bitmap.resize(ceil(brushWidth), ceil(penWidth));
+            bitmap.deviceContext()->begin();
+            bitmap.deviceContext()->get()->SetAntialiasMode(antialiasMode());
+            bitmap.deviceContext()->get()->SetTransform(D2D1::IdentityMatrix());
+            bitmap.deviceContext()->get()->Clear();
+            const qreal offsetX = (qreal(bitmap.size().width()) - brushWidth) / 2;
+            const qreal offsetY = qreal(bitmap.size().height()) / 2;
+            bitmap.deviceContext()->get()->DrawLine(D2D1::Point2F(offsetX, offsetY),
+                                                    D2D1::Point2F(brushWidth, offsetY),
+                                                    pen.brush.Get(), penWidth, pen.strokeStyle.Get());
+            bitmap.deviceContext()->end();
+            D2D1_BITMAP_BRUSH_PROPERTIES1 bitmapBrushProperties = D2D1::BitmapBrushProperties1(
+                        D2D1_EXTEND_MODE_WRAP, D2D1_EXTEND_MODE_CLAMP, D2D1_INTERPOLATION_MODE_LINEAR);
+            hr = dc()->CreateBitmapBrush(bitmap.bitmap(), bitmapBrushProperties, &pen.dashBrush);
         } else {
             hr = factory()->CreateStrokeStyle(props, NULL, 0, &pen.strokeStyle);
         }
@@ -836,10 +874,79 @@ public:
     {
         dc()->SetAntialiasMode(antialiasMode());
     }
+
+    void drawGlyphRun(const D2D1_POINT_2F &pos,
+                      IDWriteFontFace *fontFace,
+                      const QFontDef &fontDef,
+                      int numGlyphs,
+                      const UINT16 *glyphIndices,
+                      const FLOAT *glyphAdvances,
+                      const DWRITE_GLYPH_OFFSET *glyphOffsets,
+                      bool rtl)
+    {
+        Q_Q(QWindowsDirect2DPaintEngine);
+
+        DWRITE_GLYPH_RUN glyphRun = {
+            fontFace,          //    IDWriteFontFace           *fontFace;
+            fontDef.pixelSize, //    FLOAT                     fontEmSize;
+            numGlyphs,         //    UINT32                    glyphCount;
+            glyphIndices,      //    const UINT16              *glyphIndices;
+            glyphAdvances,     //    const FLOAT               *glyphAdvances;
+            glyphOffsets,      //    const DWRITE_GLYPH_OFFSET *glyphOffsets;
+            FALSE,             //    BOOL                      isSideways;
+            rtl ? 1 : 0        //    UINT32                    bidiLevel;
+        };
+
+        const bool antiAlias = bool((q->state()->renderHints & QPainter::TextAntialiasing)
+                                    && !(fontDef.styleStrategy & QFont::NoAntialias));
+        const D2D1_TEXT_ANTIALIAS_MODE antialiasMode = (flags & QWindowsDirect2DPaintEngine::TranslucentTopLevelWindow)
+                ? D2D1_TEXT_ANTIALIAS_MODE_GRAYSCALE : D2D1_TEXT_ANTIALIAS_MODE_CLEARTYPE;
+        dc()->SetTextAntialiasMode(antiAlias ? antialiasMode : D2D1_TEXT_ANTIALIAS_MODE_ALIASED);
+
+        dc()->DrawGlyphRun(pos,
+                           &glyphRun,
+                           NULL,
+                           pen.brush.Get(),
+                           DWRITE_MEASURING_MODE_GDI_CLASSIC);
+    }
+
+    ComPtr<IDWriteFontFace> fontFaceFromFontEngine(QFontEngine *fe)
+    {
+        const QFontDef fontDef = fe->fontDef;
+        ComPtr<IDWriteFontFace> fontFace = fontCache.value(fontDef);
+        if (fontFace)
+            return fontFace;
+
+        LOGFONT lf = QWindowsFontDatabase::fontDefToLOGFONT(fontDef);
+
+        // Get substitute name
+        static const char keyC[] = "HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Windows NT\\CurrentVersion\\FontSubstitutes";
+        const QString familyName = QString::fromWCharArray(lf.lfFaceName);
+        const QString nameSubstitute = QSettings(QLatin1String(keyC), QSettings::NativeFormat).value(familyName, familyName).toString();
+        memcpy(lf.lfFaceName, nameSubstitute.utf16(), sizeof(wchar_t) * qMin(nameSubstitute.length() + 1, LF_FACESIZE));
+
+        ComPtr<IDWriteFont> dwriteFont;
+        HRESULT hr = QWindowsDirect2DContext::instance()->dwriteGdiInterop()->CreateFontFromLOGFONT(&lf, &dwriteFont);
+        if (FAILED(hr)) {
+            qDebug("%s: CreateFontFromLOGFONT failed: %#x", __FUNCTION__, hr);
+            return fontFace;
+        }
+
+        hr = dwriteFont->CreateFontFace(&fontFace);
+        if (FAILED(hr)) {
+            qDebug("%s: CreateFontFace failed: %#x", __FUNCTION__, hr);
+            return fontFace;
+        }
+
+        if (fontFace)
+            fontCache.insert(fontDef, fontFace);
+
+        return fontFace;
+    }
 };
 
-QWindowsDirect2DPaintEngine::QWindowsDirect2DPaintEngine(QWindowsDirect2DBitmap *bitmap)
-    : QPaintEngineEx(*(new QWindowsDirect2DPaintEnginePrivate(bitmap)))
+QWindowsDirect2DPaintEngine::QWindowsDirect2DPaintEngine(QWindowsDirect2DBitmap *bitmap, Flags flags)
+    : QPaintEngineEx(*(new QWindowsDirect2DPaintEnginePrivate(bitmap, flags)))
 {
     QPaintEngine::PaintEngineFeatures unsupported =
             // As of 1.1 Direct2D does not natively support complex composition modes
@@ -878,7 +985,7 @@ bool QWindowsDirect2DPaintEngine::begin(QPaintDevice * pdev)
                                                D2D1::IdentityMatrix(),
                                                1.0,
                                                NULL,
-                                               D2D1_LAYER_OPTIONS1_INITIALIZE_FROM_BACKGROUND),
+                                               d->layerOptions()),
                         NULL);
     } else {
         QRect clip(0, 0, pdev->width(), pdev->height());
@@ -897,7 +1004,17 @@ bool QWindowsDirect2DPaintEngine::begin(QPaintDevice * pdev)
 bool QWindowsDirect2DPaintEngine::end()
 {
     Q_D(QWindowsDirect2DPaintEngine);
-    // First pop any user-applied clipping
+
+    // Always clear all emulation-related things so we are in a clean state for our next painting run
+    const bool emulatingComposition = d->flags.testFlag(EmulateComposition);
+    d->flags &= ~QWindowsDirect2DPaintEngine::EmulateComposition;
+    if (!d->fallbackImage.isNull()) {
+        if (emulatingComposition)
+            drawImage(d->fallbackImage.rect(), d->fallbackImage, d->fallbackImage.rect());
+        d->fallbackImage = QImage();
+    }
+
+    // Pop any user-applied clipping
     d->clearClips();
     // Now the system clip from begin() above
     if (d->clipFlags & SimpleSystemClip) {
@@ -906,6 +1023,7 @@ bool QWindowsDirect2DPaintEngine::end()
     } else {
         d->dc()->PopLayer();
     }
+
     return d->bitmap->deviceContext()->end();
 }
 
@@ -1210,7 +1328,12 @@ void QWindowsDirect2DPaintEngine::drawLines(const QLine *lines, int lineCount)
             D2D1_POINT_2F d2d_p1 = to_d2d_point_2f(p1);
             D2D1_POINT_2F d2d_p2 = to_d2d_point_2f(p2);
 
-            d->dc()->DrawLine(d2d_p1, d2d_p2, d->pen.brush.Get(), d->pen.qpen.widthF(), d->pen.strokeStyle.Get());
+            if (!d->pen.dashBrush || state()->renderHints.testFlag(QPainter::HighQualityAntialiasing)) {
+                d->dc()->DrawLine(d2d_p1, d2d_p2, d->pen.brush.Get(), d->pen.qpen.widthF(), d->pen.strokeStyle.Get());
+            } else {
+                d->pen.dashBrush->SetTransform(transformFromLine(lines[i], d->pen.qpen.widthF()));
+                d->dc()->DrawLine(d2d_p1, d2d_p2, d->pen.dashBrush.Get(), d->pen.qpen.widthF(), NULL);
+            }
         }
     }
 }
@@ -1246,7 +1369,12 @@ void QWindowsDirect2DPaintEngine::drawLines(const QLineF *lines, int lineCount)
             D2D1_POINT_2F d2d_p1 = to_d2d_point_2f(p1);
             D2D1_POINT_2F d2d_p2 = to_d2d_point_2f(p2);
 
-            d->dc()->DrawLine(d2d_p1, d2d_p2, d->pen.brush.Get(), d->pen.qpen.widthF(), d->pen.strokeStyle.Get());
+            if (!d->pen.dashBrush || state()->renderHints.testFlag(QPainter::HighQualityAntialiasing)) {
+                d->dc()->DrawLine(d2d_p1, d2d_p2, d->pen.brush.Get(), d->pen.qpen.widthF(), d->pen.strokeStyle.Get());
+            } else {
+                d->pen.dashBrush->SetTransform(transformFromLine(lines[i], d->pen.qpen.widthF()));
+                d->dc()->DrawLine(d2d_p1, d2d_p2, d->pen.dashBrush.Get(), d->pen.qpen.widthF(), NULL);
+            }
         }
     }
 }
@@ -1335,6 +1463,19 @@ void QWindowsDirect2DPaintEngine::drawPixmap(const QRectF &r,
         return;
     }
 
+    if (d->flags.testFlag(EmulateComposition)) {
+        const qreal points[] = {
+            r.x(), r.y(),
+            r.x() + r.width(), r.y(),
+            r.x() + r.width(), r.y() + r.height(),
+            r.x(), r.y() + r.height()
+        };
+        const QVectorPath vp(points, 4, 0, QVectorPath::RectangleHint);
+        const QBrush brush(sr.isValid() ? pm.copy(sr.toRect()) : pm);
+        rasterFill(vp, brush);
+        return;
+    }
+
     QWindowsDirect2DPlatformPixmap *pp = static_cast<QWindowsDirect2DPlatformPixmap *>(pm.handle());
     QWindowsDirect2DBitmap *bitmap = pp->bitmap();
 
@@ -1411,7 +1552,7 @@ void QWindowsDirect2DPaintEngine::drawStaticTextItem(QStaticTextItem *staticText
         return;
     }
 
-    ComPtr<IDWriteFontFace> fontFace = fontFaceFromFontEngine(staticTextItem->font, staticTextItem->fontEngine());
+    ComPtr<IDWriteFontFace> fontFace = d->fontFaceFromFontEngine(staticTextItem->fontEngine());
     if (!fontFace) {
         qWarning("%s: Could not find font - falling back to slow text rendering path.", __FUNCTION__);
         QPaintEngineEx::drawStaticTextItem(staticTextItem);
@@ -1432,14 +1573,14 @@ void QWindowsDirect2DPaintEngine::drawStaticTextItem(QStaticTextItem *staticText
         glyphOffsets[i].ascenderOffset = staticTextItem->glyphPositions[i].y.toReal() * -1;
     }
 
-    drawGlyphRun(D2D1::Point2F(0, 0),
-                 fontFace.Get(),
-                 staticTextItem->font,
-                 staticTextItem->numGlyphs,
-                 glyphIndices.constData(),
-                 glyphAdvances.constData(),
-                 glyphOffsets.constData(),
-                 false);
+    d->drawGlyphRun(D2D1::Point2F(0, 0),
+                    fontFace.Get(),
+                    staticTextItem->fontEngine()->fontDef,
+                    staticTextItem->numGlyphs,
+                    glyphIndices.constData(),
+                    glyphAdvances.constData(),
+                    glyphOffsets.constData(),
+                    false);
 }
 
 void QWindowsDirect2DPaintEngine::drawTextItem(const QPointF &p, const QTextItem &textItem)
@@ -1459,7 +1600,7 @@ void QWindowsDirect2DPaintEngine::drawTextItem(const QPointF &p, const QTextItem
         return;
     }
 
-    ComPtr<IDWriteFontFace> fontFace = fontFaceFromFontEngine(*ti.f, ti.fontEngine);
+    ComPtr<IDWriteFontFace> fontFace = d->fontFaceFromFontEngine(ti.fontEngine);
     if (!fontFace) {
         qWarning("%s: Could not find font - falling back to slow text rendering path.", __FUNCTION__);
         QPaintEngine::drawTextItem(p, textItem);
@@ -1482,72 +1623,14 @@ void QWindowsDirect2DPaintEngine::drawTextItem(const QPointF &p, const QTextItem
     const bool rtl = (ti.flags & QTextItem::RightToLeft);
     const QPointF offset(rtl ? ti.width.toReal() : 0, 0);
 
-    drawGlyphRun(to_d2d_point_2f(p + offset),
-                 fontFace.Get(),
-                 ti.font(),
-                 ti.glyphs.numGlyphs,
-                 glyphIndices.constData(),
-                 glyphAdvances.constData(),
-                 glyphOffsets.constData(),
-                 rtl);
-}
-
-inline static FLOAT pointSizeToDIP(qreal pointSize, FLOAT dpiY)
-{
-    return (pointSize + (pointSize / qreal(3.0))) * (dpiY / 96.0f);
-}
-
-inline static FLOAT pixelSizeToDIP(int pixelSize, FLOAT dpiY)
-{
-    return FLOAT(pixelSize) * 96.0f / dpiY;
-}
-
-inline static FLOAT fontSizeInDIP(const QFont &font)
-{
-    FLOAT dpiX, dpiY;
-    QWindowsDirect2DContext::instance()->d2dFactory()->GetDesktopDpi(&dpiX, &dpiY);
-
-    if (font.pixelSize() == -1) {
-        // font size was set as points
-        return pointSizeToDIP(font.pointSizeF(), dpiY);
-    } else {
-        // font size was set as pixels
-        return pixelSizeToDIP(font.pixelSize(), dpiY);
-    }
-}
-
-void QWindowsDirect2DPaintEngine::drawGlyphRun(const D2D1_POINT_2F &pos,
-                                               IDWriteFontFace *fontFace,
-                                               const QFont &font,
-                                               int numGlyphs,
-                                               const UINT16 *glyphIndices,
-                                               const FLOAT *glyphAdvances,
-                                               const DWRITE_GLYPH_OFFSET *glyphOffsets,
-                                               bool rtl)
-{
-    Q_D(QWindowsDirect2DPaintEngine);
-
-    DWRITE_GLYPH_RUN glyphRun = {
-        fontFace,               //    IDWriteFontFace           *fontFace;
-        fontSizeInDIP(font),    //    FLOAT                     fontEmSize;
-        numGlyphs,              //    UINT32                    glyphCount;
-        glyphIndices,           //    const UINT16              *glyphIndices;
-        glyphAdvances,          //    const FLOAT               *glyphAdvances;
-        glyphOffsets,           //    const DWRITE_GLYPH_OFFSET *glyphOffsets;
-        FALSE,                  //    BOOL                      isSideways;
-        rtl ? 1 : 0             //    UINT32                    bidiLevel;
-    };
-
-    const bool antiAlias = bool((state()->renderHints & QPainter::TextAntialiasing)
-                                && !(font.styleStrategy() & QFont::NoAntialias));
-    d->dc()->SetTextAntialiasMode(antiAlias ? D2D1_TEXT_ANTIALIAS_MODE_CLEARTYPE
-                                            : D2D1_TEXT_ANTIALIAS_MODE_ALIASED);
-
-    d->dc()->DrawGlyphRun(pos,
-                          &glyphRun,
-                          NULL,
-                          d->pen.brush.Get(),
-                          DWRITE_MEASURING_MODE_GDI_CLASSIC);
+    d->drawGlyphRun(to_d2d_point_2f(p + offset),
+                    fontFace.Get(),
+                    ti.fontEngine->fontDef,
+                    ti.glyphs.numGlyphs,
+                    glyphIndices.constData(),
+                    glyphAdvances.constData(),
+                    glyphOffsets.constData(),
+                    rtl);
 }
 
 void QWindowsDirect2DPaintEngine::ensureBrush()
@@ -1576,9 +1659,17 @@ void QWindowsDirect2DPaintEngine::rasterFill(const QVectorPath &path, const QBru
 {
     Q_D(QWindowsDirect2DPaintEngine);
 
-    QImage img(d->bitmap->size(), QImage::Format_ARGB32);
-    img.fill(Qt::transparent);
+    if (d->fallbackImage.isNull()) {
+        if (d->flags.testFlag(EmulateComposition)) {
+            QWindowsDirect2DPaintEngineSuspender suspender(this);
+            d->fallbackImage = d->bitmap->toImage();
+        } else {
+            d->fallbackImage = QImage(d->bitmap->size(), QImage::Format_ARGB32_Premultiplied);
+            d->fallbackImage.fill(Qt::transparent);
+        }
+    }
 
+    QImage &img = d->fallbackImage;
     QPainter p;
     QPaintEngine *engine = img.paintEngine();
 
@@ -1625,11 +1716,14 @@ void QWindowsDirect2DPaintEngine::rasterFill(const QVectorPath &path, const QBru
         if (!p.end())
             qWarning("%s: Paint Engine end returned false", __FUNCTION__);
 
-        d->updateClipEnabled(false);
-        d->updateTransform(QTransform());
-        drawImage(img.rect(), img, img.rect());
-        transformChanged();
-        clipEnabledChanged();
+        if (!d->flags.testFlag(EmulateComposition)) { // Emulated fallback will be flattened in end()
+            d->updateClipEnabled(false);
+            d->updateTransform(QTransform());
+            drawImage(img.rect(), img, img.rect());
+            d->fallbackImage = QImage();
+            transformChanged();
+            clipEnabledChanged();
+        }
     } else {
         qWarning("%s: Could not fall back to QImage", __FUNCTION__);
     }
@@ -1639,6 +1733,9 @@ bool QWindowsDirect2DPaintEngine::emulationRequired(EmulationType type) const
 {
     Q_D(const QWindowsDirect2DPaintEngine);
 
+    if (d->flags.testFlag(EmulateComposition))
+        return true;
+
     if (!state()->matrix.isAffine())
         return true;
 
@@ -1678,49 +1775,71 @@ void QWindowsDirect2DPaintEngine::adjustForAliasing(QPointF *point)
         (*point) += adjustment;
 }
 
-Microsoft::WRL::ComPtr<IDWriteFontFace> QWindowsDirect2DPaintEngine::fontFaceFromFontEngine(const QFont &font, QFontEngine *fe)
+void QWindowsDirect2DPaintEngine::suspend()
 {
-    Q_D(QWindowsDirect2DPaintEngine);
+    end();
+}
 
-    ComPtr<IDWriteFontFace> fontFace = d->fontCache.value(font);
-    if (fontFace)
-        return fontFace;
+void QWindowsDirect2DPaintEngine::resume()
+{
+    begin(paintDevice());
+    clipEnabledChanged();
+    penChanged();
+    brushChanged();
+    brushOriginChanged();
+    opacityChanged();
+    compositionModeChanged();
+    renderHintsChanged();
+    transformChanged();
+}
 
-    switch (fe->type()) {
-    case QFontEngine::Win:
+class QWindowsDirect2DPaintEngineSuspenderImpl
+{
+    Q_DISABLE_COPY(QWindowsDirect2DPaintEngineSuspenderImpl)
+    QWindowsDirect2DPaintEngine *m_engine;
+    bool m_active;
+public:
+    QWindowsDirect2DPaintEngineSuspenderImpl(QWindowsDirect2DPaintEngine *engine)
+        : m_engine(engine)
+        , m_active(engine->isActive())
     {
-        QWindowsFontEngine *wfe = static_cast<QWindowsFontEngine *>(fe);
-        QSharedPointer<QWindowsFontEngineData> wfed = wfe->fontEngineData();
-
-        HGDIOBJ oldfont = wfe->selectDesignFont();
-        HRESULT hr = QWindowsDirect2DContext::instance()->dwriteGdiInterop()->CreateFontFaceFromHdc(wfed->hdc, &fontFace);
-        DeleteObject(SelectObject(wfed->hdc, oldfont));
-        if (FAILED(hr))
-            qWarning("%s: Could not create DirectWrite fontface from HDC: %#x", __FUNCTION__, hr);
-
+        if (m_active)
+            m_engine->suspend();
     }
-        break;
 
-#ifndef QT_NO_DIRECTWRITE
+    ~QWindowsDirect2DPaintEngineSuspenderImpl()
+    {
+        if (m_active)
+            m_engine->resume();
+    }
+};
 
-    case QFontEngine::DirectWrite:
+class QWindowsDirect2DPaintEngineSuspenderPrivate
+{
+public:
+    QWindowsDirect2DPaintEngineSuspenderPrivate(QWindowsDirect2DPaintEngine *engine)
+        : engineSuspender(engine)
+        , dcSuspender(static_cast<QWindowsDirect2DPaintEnginePrivate *>(engine->d_ptr.data())->bitmap->deviceContext())
     {
-        QWindowsFontEngineDirectWrite *wfedw = static_cast<QWindowsFontEngineDirectWrite *>(fe);
-        fontFace = wfedw->directWriteFontFace();
     }
-        break;
 
-#endif // QT_NO_DIRECTWRITE
+    QWindowsDirect2DPaintEngineSuspenderImpl engineSuspender;
+    QWindowsDirect2DDeviceContextSuspender dcSuspender;
+};
 
-    default:
-        qWarning("%s: Unknown font engine!", __FUNCTION__);
-        break;
-    }
+QWindowsDirect2DPaintEngineSuspender::QWindowsDirect2DPaintEngineSuspender(QWindowsDirect2DPaintEngine *engine)
+    : d_ptr(new QWindowsDirect2DPaintEngineSuspenderPrivate(engine))
+{
+
+}
 
-    if (fontFace)
-        d->fontCache.insert(font, fontFace);
+QWindowsDirect2DPaintEngineSuspender::~QWindowsDirect2DPaintEngineSuspender()
+{
+}
 
-    return fontFace;
+void QWindowsDirect2DPaintEngineSuspender::resume()
+{
+    d_ptr.reset();
 }
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.h b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.h
index c91a951ebe..39cbfdc6cb 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dpaintengine.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,9 +49,17 @@ class QWindowsDirect2DBitmap;
 class QWindowsDirect2DPaintEngine : public QPaintEngineEx
 {
     Q_DECLARE_PRIVATE(QWindowsDirect2DPaintEngine)
-
+    friend class QWindowsDirect2DPaintEngineSuspenderImpl;
+    friend class QWindowsDirect2DPaintEngineSuspenderPrivate;
 public:
-    QWindowsDirect2DPaintEngine(QWindowsDirect2DBitmap *bitmap);
+    enum Flag {
+        NoFlag = 0,
+        TranslucentTopLevelWindow = 1,
+        EmulateComposition = 2,
+    };
+    Q_DECLARE_FLAGS(Flags, Flag)
+
+    QWindowsDirect2DPaintEngine(QWindowsDirect2DBitmap *bitmap, Flags flags);
 
     bool begin(QPaintDevice *pdev) Q_DECL_OVERRIDE;
     bool end() Q_DECL_OVERRIDE;
@@ -105,10 +105,6 @@ public:
     void drawTextItem(const QPointF &p, const QTextItem &textItem) Q_DECL_OVERRIDE;
 
 private:
-    void drawGlyphRun(const D2D1_POINT_2F &pos, IDWriteFontFace *fontFace, const QFont &font,
-                      int numGlyphs, const UINT16 *glyphIndices, const FLOAT *glyphAdvances,
-                      const DWRITE_GLYPH_OFFSET *glyphOffsets, bool rtl);
-
     void ensureBrush();
     void ensureBrush(const QBrush &brush);
     void ensurePen();
@@ -123,7 +119,21 @@ private:
     void adjustForAliasing(QRectF *rect);
     void adjustForAliasing(QPointF *point);
 
-    Microsoft::WRL::ComPtr<IDWriteFontFace> fontFaceFromFontEngine(const QFont &font, QFontEngine *fe);
+    void suspend();
+    void resume();
+};
+Q_DECLARE_OPERATORS_FOR_FLAGS(QWindowsDirect2DPaintEngine::Flags)
+
+class QWindowsDirect2DPaintEngineSuspenderPrivate;
+class QWindowsDirect2DPaintEngineSuspender
+{
+    Q_DISABLE_COPY(QWindowsDirect2DPaintEngineSuspender)
+    Q_DECLARE_PRIVATE(QWindowsDirect2DPaintEngineSuspender)
+    QScopedPointer<QWindowsDirect2DPaintEngineSuspenderPrivate> d_ptr;
+public:
+    QWindowsDirect2DPaintEngineSuspender(QWindowsDirect2DPaintEngine *engine);
+    ~QWindowsDirect2DPaintEngineSuspender();
+    void resume();
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.cpp
index d9f7c595ca..d3dad1cbb9 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,10 +54,11 @@ public:
         , devicePixelRatio(1.0)
     {}
 
-    QWindowsDirect2DPlatformPixmapPrivate(QWindowsDirect2DBitmap *bitmap)
+    QWindowsDirect2DPlatformPixmapPrivate(QWindowsDirect2DBitmap *bitmap,
+                                          QWindowsDirect2DPaintEngine::Flags flags)
         : owns_bitmap(false)
         , bitmap(bitmap)
-        , device(new QWindowsDirect2DPaintDevice(bitmap, QInternal::Pixmap))
+        , device(new QWindowsDirect2DPaintDevice(bitmap, QInternal::Pixmap, flags))
         , devicePixelRatio(1.0)
     {}
 
@@ -91,9 +84,10 @@ QWindowsDirect2DPlatformPixmap::QWindowsDirect2DPlatformPixmap(PixelType pixelTy
 }
 
 QWindowsDirect2DPlatformPixmap::QWindowsDirect2DPlatformPixmap(QPlatformPixmap::PixelType pixelType,
+                                                               QWindowsDirect2DPaintEngine::Flags flags,
                                                                QWindowsDirect2DBitmap *bitmap)
     : QPlatformPixmap(pixelType, Direct2DClass)
-    , d_ptr(new QWindowsDirect2DPlatformPixmapPrivate(bitmap))
+    , d_ptr(new QWindowsDirect2DPlatformPixmapPrivate(bitmap, flags))
 {
     setSerialNumber(qt_d2dpixmap_serno++);
 
@@ -167,17 +161,8 @@ QImage QWindowsDirect2DPlatformPixmap::toImage(const QRect &rect) const
 {
     Q_D(const QWindowsDirect2DPlatformPixmap);
 
-    bool active = d->device->paintEngine()->isActive();
-
-    if (active)
-        d->device->paintEngine()->end();
-
-    QImage result = d->bitmap->toImage(rect);
-
-    if (active)
-        d->device->paintEngine()->begin(d->device.data());
-
-    return result;
+    QWindowsDirect2DPaintEngineSuspender suspender(static_cast<QWindowsDirect2DPaintEngine *>(d->device->paintEngine()));
+    return d->bitmap->toImage(rect);
 }
 
 QPaintEngine* QWindowsDirect2DPlatformPixmap::paintEngine() const
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.h b/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.h
index 1936ef0622..e1d342ef72 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dplatformpixmap.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #ifndef QWINDOWSDIRECT2DPLATFORMPIXMAP_H
 #define QWINDOWSDIRECT2DPLATFORMPIXMAP_H
 
+#include "qwindowsdirect2dpaintengine.h"
 #include <QtGui/qpa/qplatformpixmap.h>
 #include <QtCore/QScopedPointer>
 
@@ -57,25 +50,25 @@ public:
     QWindowsDirect2DPlatformPixmap(PixelType pixelType);
 
     // We do NOT take ownership of the bitmap through this constructor!
-    QWindowsDirect2DPlatformPixmap(PixelType pixelType, QWindowsDirect2DBitmap *bitmap);
+    QWindowsDirect2DPlatformPixmap(PixelType pixelType, QWindowsDirect2DPaintEngine::Flags flags, QWindowsDirect2DBitmap *bitmap);
     ~QWindowsDirect2DPlatformPixmap();
 
-    virtual void resize(int width, int height);
+    void resize(int width, int height) Q_DECL_OVERRIDE;
     virtual void fromImage(const QImage &image,
                            Qt::ImageConversionFlags flags);
 
-    virtual int metric(QPaintDevice::PaintDeviceMetric metric) const;
-    virtual void fill(const QColor &color);
+    int metric(QPaintDevice::PaintDeviceMetric metric) const Q_DECL_OVERRIDE;
+    void fill(const QColor &color) Q_DECL_OVERRIDE;
 
-    virtual bool hasAlphaChannel() const;
+    bool hasAlphaChannel() const Q_DECL_OVERRIDE;
 
-    virtual QImage toImage() const;
-    virtual QImage toImage(const QRect &rect) const;
+    QImage toImage() const Q_DECL_OVERRIDE;
+    QImage toImage(const QRect &rect) const Q_DECL_OVERRIDE;
 
-    virtual QPaintEngine* paintEngine() const;
+    QPaintEngine* paintEngine() const Q_DECL_OVERRIDE;
 
-    virtual qreal devicePixelRatio() const;
-    virtual void setDevicePixelRatio(qreal scaleFactor);
+    qreal devicePixelRatio() const Q_DECL_OVERRIDE;
+    void setDevicePixelRatio(qreal scaleFactor) Q_DECL_OVERRIDE;
 
     QWindowsDirect2DBitmap *bitmap() const;
 
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dplatformplugin.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dplatformplugin.cpp
index 85fbeb7d6f..79e4be7564 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dplatformplugin.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dplatformplugin.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.cpp b/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.cpp
index 15ec0c3526..ef02d77375 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.cpp
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,30 +46,15 @@ QT_BEGIN_NAMESPACE
 QWindowsDirect2DWindow::QWindowsDirect2DWindow(QWindow *window, const QWindowsWindowData &data)
     : QWindowsWindow(window, data)
     , m_needsFullFlush(true)
+    , m_directRendering(!(data.flags & Qt::FramelessWindowHint && window->format().hasAlpha()))
 {
     if (window->type() == Qt::Desktop)
         return; // No further handling for Qt::Desktop
 
-    DXGI_SWAP_CHAIN_DESC1 desc = {};
-
-    desc.Format = DXGI_FORMAT_B8G8R8A8_UNORM;
-    desc.SampleDesc.Count = 1;
-    desc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
-    desc.BufferCount = 1;
-    desc.SwapEffect = DXGI_SWAP_EFFECT_SEQUENTIAL;
-
-    HRESULT hr = QWindowsDirect2DContext::instance()->dxgiFactory()->CreateSwapChainForHwnd(
-                QWindowsDirect2DContext::instance()->d3dDevice(), // [in]   IUnknown *pDevice
-                handle(),                                         // [in]   HWND hWnd
-                &desc,                                            // [in]   const DXGI_SWAP_CHAIN_DESC1 *pDesc
-                NULL,                                             // [in]   const DXGI_SWAP_CHAIN_FULLSCREEN_DESC *pFullscreenDesc
-                NULL,                                             // [in]   IDXGIOutput *pRestrictToOutput
-                m_swapChain.ReleaseAndGetAddressOf());            // [out]  IDXGISwapChain1 **ppSwapChain
+    if (m_directRendering)
+        setupSwapChain();
 
-    if (FAILED(hr))
-        qWarning("%s: Could not create swap chain: %#x", __FUNCTION__, hr);
-
-    hr = QWindowsDirect2DContext::instance()->d2dDevice()->CreateDeviceContext(
+    HRESULT hr = QWindowsDirect2DContext::instance()->d2dDevice()->CreateDeviceContext(
                 D2D1_DEVICE_CONTEXT_OPTIONS_NONE,
                 m_deviceContext.GetAddressOf());
     if (FAILED(hr))
@@ -88,6 +65,17 @@ QWindowsDirect2DWindow::~QWindowsDirect2DWindow()
 {
 }
 
+void QWindowsDirect2DWindow::setWindowFlags(Qt::WindowFlags flags)
+{
+    m_directRendering = !(flags & Qt::FramelessWindowHint && window()->format().hasAlpha());
+    if (!m_directRendering)
+        m_swapChain.Reset(); // No need for the swap chain; release from memory
+    else if (!m_swapChain)
+        setupSwapChain();
+
+    QWindowsWindow::setWindowFlags(flags);
+}
+
 QPixmap *QWindowsDirect2DWindow::pixmap()
 {
     setupBitmap();
@@ -97,13 +85,20 @@ QPixmap *QWindowsDirect2DWindow::pixmap()
 
 void QWindowsDirect2DWindow::flush(QWindowsDirect2DBitmap *bitmap, const QRegion &region, const QPoint &offset)
 {
-    DXGI_SWAP_CHAIN_DESC1 desc;
-    HRESULT hr = m_swapChain->GetDesc1(&desc);
-    QRect geom = geometry();
-
-    if (FAILED(hr) || (desc.Width != geom.width()) || (desc.Height != geom.height())) {
-        resizeSwapChain(geom.size());
-        m_swapChain->GetDesc1(&desc);
+    QSize size;
+    if (m_directRendering) {
+        DXGI_SWAP_CHAIN_DESC1 desc;
+        HRESULT hr = m_swapChain->GetDesc1(&desc);
+        QRect geom = geometry();
+
+        if ((FAILED(hr) || (desc.Width != geom.width()) || (desc.Height != geom.height()))) {
+            resizeSwapChain(geom.size());
+            m_swapChain->GetDesc1(&desc);
+        }
+        size.setWidth(desc.Width);
+        size.setHeight(desc.Height);
+    } else {
+        size = geometry().size();
     }
 
     setupBitmap();
@@ -116,7 +111,7 @@ void QWindowsDirect2DWindow::flush(QWindowsDirect2DBitmap *bitmap, const QRegion
         ID2D1DeviceContext *dc = m_bitmap->deviceContext()->get();
         if (!m_needsFullFlush) {
             QRegion clipped = region;
-            clipped &= QRect(0, 0, desc.Width, desc.Height);
+            clipped &= QRect(QPoint(), size);
 
             foreach (const QRect &rect, clipped.rects()) {
                 QRectF rectF(rect);
@@ -127,7 +122,7 @@ void QWindowsDirect2DWindow::flush(QWindowsDirect2DBitmap *bitmap, const QRegion
                                to_d2d_rect_f(rectF.translated(offset.x(), offset.y())));
             }
         } else {
-            QRectF rectF(0, 0, desc.Width, desc.Height);
+            QRectF rectF(QPoint(), size);
             dc->DrawBitmap(bitmap->bitmap(),
                            to_d2d_rect_f(rectF),
                            1.0,
@@ -140,9 +135,66 @@ void QWindowsDirect2DWindow::flush(QWindowsDirect2DBitmap *bitmap, const QRegion
     }
 }
 
-void QWindowsDirect2DWindow::present()
+void QWindowsDirect2DWindow::present(const QRegion &region)
 {
-    m_swapChain->Present(0, 0);
+    if (m_directRendering) {
+        m_swapChain->Present(0, 0);
+        return;
+    }
+
+    ComPtr<IDXGISurface> bitmapSurface;
+    HRESULT hr = m_bitmap->bitmap()->GetSurface(&bitmapSurface);
+    Q_ASSERT(SUCCEEDED(hr));
+    ComPtr<IDXGISurface1> dxgiSurface;
+    hr = bitmapSurface.As(&dxgiSurface);
+    Q_ASSERT(SUCCEEDED(hr));
+
+    HDC hdc;
+    hr = dxgiSurface->GetDC(FALSE, &hdc);
+    if (FAILED(hr)) {
+        qErrnoWarning(hr, "Failed to get DC for presenting the surface");
+        return;
+    }
+
+    const QRect bounds = window()->geometry();
+    const SIZE size = { bounds.width(), bounds.height() };
+    const POINT ptDst = { bounds.x(), bounds.y() };
+    const POINT ptSrc = { 0, 0 };
+    const BLENDFUNCTION blend = { AC_SRC_OVER, 0, 255.0 * opacity(), AC_SRC_ALPHA };
+    const QRect r = region.boundingRect();
+    const RECT dirty = { r.left(), r.top(), r.left() + r.width(), r.top() + r.height() };
+    UPDATELAYEREDWINDOWINFO info = { sizeof(UPDATELAYEREDWINDOWINFO), NULL,
+                                     &ptDst, &size, hdc, &ptSrc, 0, &blend, ULW_ALPHA, &dirty };
+    if (!UpdateLayeredWindowIndirect(handle(), &info))
+        qErrnoWarning(GetLastError(), "Failed to update the layered window");
+
+    hr = dxgiSurface->ReleaseDC(NULL);
+    if (FAILED(hr))
+        qErrnoWarning(hr, "Failed to release the DC for presentation");
+}
+
+void QWindowsDirect2DWindow::setupSwapChain()
+{
+    DXGI_SWAP_CHAIN_DESC1 desc = {};
+
+    desc.Format = DXGI_FORMAT_B8G8R8A8_UNORM;
+    desc.SampleDesc.Count = 1;
+    desc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
+    desc.BufferCount = 1;
+    desc.SwapEffect = DXGI_SWAP_EFFECT_SEQUENTIAL;
+
+    HRESULT hr = QWindowsDirect2DContext::instance()->dxgiFactory()->CreateSwapChainForHwnd(
+                QWindowsDirect2DContext::instance()->d3dDevice(), // [in]   IUnknown *pDevice
+                handle(),                                         // [in]   HWND hWnd
+                &desc,                                            // [in]   const DXGI_SWAP_CHAIN_DESC1 *pDesc
+                NULL,                                             // [in]   const DXGI_SWAP_CHAIN_FULLSCREEN_DESC *pFullscreenDesc
+                NULL,                                             // [in]   IDXGIOutput *pRestrictToOutput
+                m_swapChain.ReleaseAndGetAddressOf());            // [out]  IDXGISwapChain1 **ppSwapChain
+
+    if (FAILED(hr))
+        qWarning("%s: Could not create swap chain: %#x", __FUNCTION__, hr);
+
+    m_needsFullFlush = true;
 }
 
 void QWindowsDirect2DWindow::resizeSwapChain(const QSize &size)
@@ -209,14 +261,34 @@ void QWindowsDirect2DWindow::setupBitmap()
     if (!m_deviceContext)
         return;
 
-    if (!m_swapChain)
+    if (m_directRendering && !m_swapChain)
         return;
 
+    HRESULT hr;
     ComPtr<IDXGISurface1> backBufferSurface;
-    HRESULT hr = m_swapChain->GetBuffer(0, IID_PPV_ARGS(&backBufferSurface));
-    if (FAILED(hr)) {
-        qWarning("%s: Could not query backbuffer for DXGI Surface: %#x", __FUNCTION__, hr);
-        return;
+    if (m_directRendering) {
+        hr = m_swapChain->GetBuffer(0, IID_PPV_ARGS(&backBufferSurface));
+        if (FAILED(hr)) {
+            qWarning("%s: Could not query backbuffer for DXGI Surface: %#x", __FUNCTION__, hr);
+            return;
+        }
+    } else {
+        const QRect rect = geometry();
+        CD3D11_TEXTURE2D_DESC backBufferDesc(DXGI_FORMAT_B8G8R8A8_UNORM, rect.width(), rect.height(), 1, 1);
+        backBufferDesc.BindFlags = D3D11_BIND_RENDER_TARGET;
+        backBufferDesc.MiscFlags = D3D11_RESOURCE_MISC_GDI_COMPATIBLE;
+        ComPtr<ID3D11Texture2D> backBufferTexture;
+        HRESULT hr = QWindowsDirect2DContext::instance()->d3dDevice()->CreateTexture2D(&backBufferDesc, NULL, &backBufferTexture);
+        if (FAILED(hr)) {
+            qErrnoWarning(hr, "Failed to create backing texture for indirect rendering");
+            return;
+        }
+
+        hr = backBufferTexture.As(&backBufferSurface);
+        if (FAILED(hr)) {
+            qErrnoWarning(hr, "Failed to cast back buffer surface to DXGI surface");
+            return;
+        }
     }
 
     ComPtr<ID2D1Bitmap1> backBufferBitmap;
@@ -228,7 +300,11 @@ void QWindowsDirect2DWindow::setupBitmap()
 
     m_bitmap.reset(new QWindowsDirect2DBitmap(backBufferBitmap.Get(), m_deviceContext.Get()));
 
+    QWindowsDirect2DPaintEngine::Flags flags = QWindowsDirect2DPaintEngine::NoFlag;
+    if (!m_directRendering)
+        flags |= QWindowsDirect2DPaintEngine::TranslucentTopLevelWindow;
     QWindowsDirect2DPlatformPixmap *pp = new QWindowsDirect2DPlatformPixmap(QPlatformPixmap::PixmapType,
+                                                                            flags,
                                                                             m_bitmap.data());
     m_pixmap.reset(new QPixmap(pp));
 }
diff --git a/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.h b/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.h
index 47c790da5d..aeb35f308d 100644
--- a/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.h
+++ b/src/plugins/platforms/direct2d/qwindowsdirect2dwindow.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,9 +48,12 @@ public:
     QWindowsDirect2DWindow(QWindow *window, const QWindowsWindowData &data);
     ~QWindowsDirect2DWindow();
 
+    void setWindowFlags(Qt::WindowFlags flags) Q_DECL_OVERRIDE;
+
     QPixmap *pixmap();
     void flush(QWindowsDirect2DBitmap *bitmap, const QRegion &region, const QPoint &offset);
-    void present();
+    void present(const QRegion &region);
+    void setupSwapChain();
     void resizeSwapChain(const QSize &size);
 
     QSharedPointer<QWindowsDirect2DBitmap> copyBackBuffer() const;
@@ -72,6 +67,7 @@ private:
     QScopedPointer<QWindowsDirect2DBitmap> m_bitmap;
     QScopedPointer<QPixmap> m_pixmap;
     bool m_needsFullFlush;
+    bool m_directRendering;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/directfb/main.cpp b/src/plugins/platforms/directfb/main.cpp
index b0354c236d..05225dc3ce 100644
--- a/src/plugins/platforms/directfb/main.cpp
+++ b/src/plugins/platforms/directfb/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfb_egl.cpp b/src/plugins/platforms/directfb/qdirectfb_egl.cpp
index c738c3d027..d5a29445cf 100644
--- a/src/plugins/platforms/directfb/qdirectfb_egl.cpp
+++ b/src/plugins/platforms/directfb/qdirectfb_egl.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfb_egl.h b/src/plugins/platforms/directfb/qdirectfb_egl.h
index 79ef6e1cf7..32560426fc 100644
--- a/src/plugins/platforms/directfb/qdirectfb_egl.h
+++ b/src/plugins/platforms/directfb/qdirectfb_egl.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbbackingstore.cpp b/src/plugins/platforms/directfb/qdirectfbbackingstore.cpp
index 4f0537cba4..0a718a3bc8 100644
--- a/src/plugins/platforms/directfb/qdirectfbbackingstore.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbbackingstore.h b/src/plugins/platforms/directfb/qdirectfbbackingstore.h
index f311ffbf64..dedfab76a3 100644
--- a/src/plugins/platforms/directfb/qdirectfbbackingstore.h
+++ b/src/plugins/platforms/directfb/qdirectfbbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbblitter.cpp b/src/plugins/platforms/directfb/qdirectfbblitter.cpp
index 46f811f816..1ac504ba2c 100644
--- a/src/plugins/platforms/directfb/qdirectfbblitter.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbblitter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,22 +50,29 @@ static QBlittable::Capabilities dfb_blitter_capabilities()
                                     |QBlittable::SourceOverPixmapCapability
                                     |QBlittable::SourceOverScaledPixmapCapability
                                     |QBlittable::AlphaFillRectCapability
-                                    |QBlittable::OpacityPixmapCapability);
+                                    |QBlittable::OpacityPixmapCapability
+                                    |QBlittable::DrawScaledCachedGlyphsCapability
+                                    );
 }
 
 QDirectFbBlitter::QDirectFbBlitter(const QSize &rect, IDirectFBSurface *surface)
     : QBlittable(rect, dfb_blitter_capabilities())
-        , m_surface(surface)
+    , m_surface(surface)
+    , m_debugPaint(false)
 {
     m_surface->AddRef(m_surface.data());
 
     DFBSurfaceCapabilities surfaceCaps;
     m_surface->GetCapabilities(m_surface.data(), &surfaceCaps);
     m_premult = (surfaceCaps & DSCAPS_PREMULTIPLIED);
+    if (qgetenv("QT_DIRECTFB_BLITTER_DEBUGPAINT").toInt())
+        m_debugPaint = true;
 }
 
 QDirectFbBlitter::QDirectFbBlitter(const QSize &rect, bool alpha)
-    : QBlittable(rect, dfb_blitter_capabilities()), m_premult(false)
+    : QBlittable(rect, dfb_blitter_capabilities())
+    , m_premult(false)
+    , m_debugPaint(false)
 {
     DFBSurfaceDescription surfaceDesc;
     memset(&surfaceDesc,0,sizeof(DFBSurfaceDescription));
@@ -93,6 +92,9 @@ QDirectFbBlitter::QDirectFbBlitter(const QSize &rect, bool alpha)
         surfaceDesc.pixelformat = QDirectFbBlitter::pixmapFormat();
     }
 
+    if (qgetenv("QT_DIRECTFB_BLITTER_DEBUGPAINT").toInt())
+        m_debugPaint = true;
+
     IDirectFB *dfb = QDirectFbConvenience::dfbInterface();
     dfb->CreateSurface(dfb , &surfaceDesc, m_surface.outPtr());
     m_surface->Clear(m_surface.data(), 0, 0, 0, 0);
@@ -163,6 +165,8 @@ void QDirectFbBlitter::alphaFillRect(const QRectF &rect, const QColor &color, QP
     result = m_surface->FillRectangle(m_surface.data(), x, y, w, h);
     if (result != DFB_OK)
         DirectFBError("QDirectFBBlitter::alphaFillRect()", result);
+    if (m_debugPaint)
+        drawDebugRect(QRect(x, y, w, h), QColor(Qt::blue));
 }
 
 void QDirectFbBlitter::drawPixmapOpacity(const QRectF &rect, const QPixmap &pixmap, const QRectF &subrect, QPainter::CompositionMode cmode, qreal opacity)
@@ -201,13 +205,105 @@ void QDirectFbBlitter::drawPixmapOpacity(const QRectF &rect, const QPixmap &pixm
     if (cmode == QPainter::CompositionMode_SourceOver)
         m_surface->SetDstBlendFunction(m_surface.data(), DSBF_INVSRCALPHA);
 
-    if ((sRect.w == dRect.w) && (sRect.h == dRect.h))
+    if ((sRect.w == dRect.w) && (sRect.h == dRect.h)) {
         result = m_surface->Blit(m_surface.data(), s, &sRect, dRect.x, dRect.y);
-    else
+        if (result != DFB_OK)
+            DirectFBError("QDirectFBBlitter::drawPixmapOpacity()", result);
+        if (m_debugPaint)
+            drawDebugRect(QRect(dRect.x, dRect.y, sRect.w, sRect.h), QColor(Qt::green));
+    } else {
         result = m_surface->StretchBlit(m_surface.data(), s, &sRect, &dRect);
+        if (result != DFB_OK)
+            DirectFBError("QDirectFBBlitter::drawPixmapOpacity()", result);
+        if (m_debugPaint)
+            drawDebugRect(QRect(dRect.x, dRect.y, dRect.w, dRect.h), QColor(Qt::red));
+    }
+}
 
-    if (result != DFB_OK)
-        DirectFBError("QDirectFBBlitter::drawPixmapExtended()", result);
+bool QDirectFbBlitter::drawCachedGlyphs(const QPaintEngineState *state, QFontEngine::GlyphFormat glyphFormat, int numGlyphs, const glyph_t *glyphs, const QFixedPoint *positions, QFontEngine *fontEngine)
+{
+    void *cacheKey = QDirectFbConvenience::dfbInterface();
+
+    QDirectFbTextureGlyphCache *cache =
+            static_cast<QDirectFbTextureGlyphCache *>(fontEngine->glyphCache(cacheKey, glyphFormat, state->transform()));
+    if (!cache) {
+        cache = new QDirectFbTextureGlyphCache(glyphFormat, state->transform());
+        fontEngine->setGlyphCache(cacheKey, cache);
+    }
+
+    cache->populate(fontEngine, numGlyphs, glyphs, positions);
+    cache->fillInPendingGlyphs();
+
+    if (cache->image().width() == 0 || cache->image().height() == 0)
+        return false;
+
+    const int margin = fontEngine->glyphMargin(glyphFormat);
+
+    QVarLengthArray<DFBRectangle, 64> sourceRects(numGlyphs);
+    QVarLengthArray<DFBPoint, 64> destPoints(numGlyphs);
+    int nGlyphs = 0;
+
+    for (int i=0; i<numGlyphs; ++i) {
+
+        QFixed subPixelPosition = fontEngine->subPixelPositionForX(positions[i].x);
+        QTextureGlyphCache::GlyphAndSubPixelPosition glyph(glyphs[i], subPixelPosition);
+        const QTextureGlyphCache::Coord &c = cache->coords[glyph];
+        if (c.isNull())
+            continue;
+
+        int x = qFloor(positions[i].x) + c.baseLineX - margin;
+        int y = qRound(positions[i].y) - c.baseLineY - margin;
+
+        // printf("drawing [%d %d %d %d] baseline [%d %d], glyph: %d, to: %d %d, pos: %d %d\n",
+        //        c.x, c.y,
+        //        c.w, c.h,
+        //        c.baseLineX, c.baseLineY,
+        //        glyphs[i],
+        //        x, y,
+        //        positions[i].x.toInt(), positions[i].y.toInt());
+
+        sourceRects[nGlyphs].x = c.x;
+        sourceRects[nGlyphs].y = c.y;
+        sourceRects[nGlyphs].w = c.w;
+        sourceRects[nGlyphs].h = c.h;
+        destPoints[nGlyphs].x = x;
+        destPoints[nGlyphs].y = y;
+        ++nGlyphs;
+    }
+
+    const QColor color = state->pen().color();
+    m_surface->SetColor(m_surface.data(), color.red(), color.green(), color.blue(), color.alpha());
+
+    m_surface->SetSrcBlendFunction(m_surface.data(), DSBF_SRCALPHA);
+    m_surface->SetDstBlendFunction(m_surface.data(), DSBF_INVSRCALPHA);
+
+    int flags = DSBLIT_BLEND_ALPHACHANNEL | DSBLIT_COLORIZE;
+    if (color.alpha() != 0xff)
+        flags |= DSBLIT_BLEND_COLORALPHA;
+    m_surface->SetBlittingFlags(m_surface.data(), DFBSurfaceBlittingFlags(flags));
+
+    const QRasterPaintEngineState *rs = static_cast<const QRasterPaintEngineState*>(state);
+    if (rs->clip && rs->clip->enabled) {
+        Q_ASSERT(rs->clip->hasRectClip);
+        DFBRegion dfbClip;
+        dfbClip.x1 = rs->clip->clipRect.x();
+        dfbClip.y1 = rs->clip->clipRect.y();
+        dfbClip.x2 = rs->clip->clipRect.right();
+        dfbClip.y2 = rs->clip->clipRect.bottom();
+        m_surface->SetClip(m_surface.data(), &dfbClip);
+    }
+
+    m_surface->BatchBlit(m_surface.data(), cache->sourceSurface(), sourceRects.constData(), destPoints.constData(), nGlyphs);
+
+    if (m_debugPaint) {
+        for (int i = 0; i < nGlyphs; ++i) {
+            drawDebugRect(QRect(destPoints[i].x, destPoints[i].y, sourceRects[i].w, sourceRects[i].h), QColor(Qt::yellow));
+        }
+    }
+
+    if (rs->clip && rs->clip->enabled)
+        m_surface->SetClip(m_surface.data(), 0);
+    return true;
 }
 
 QImage *QDirectFbBlitter::doLock()
@@ -321,4 +417,79 @@ void QDirectFbBlitter::doUnlock()
     m_surface->Unlock(m_surface.data());
 }
 
+void QDirectFbBlitter::drawDebugRect(const QRect &rect, const QColor &color)
+{
+    int x, y, w, h;
+    DFBResult result;
+
+    // check parameters
+    rect.getRect(&x, &y ,&w, &h);
+    if ((w <= 0) || (h <= 0)) return;
+
+    m_surface->SetDrawingFlags(m_surface.data(),
+    DFBSurfaceDrawingFlags(m_premult ? (DSDRAW_BLEND | DSDRAW_SRC_PREMULTIPLY) : DSDRAW_BLEND));
+    m_surface->SetPorterDuff(m_surface.data(), DSPD_SRC_OVER);
+
+    // set color
+    m_surface->SetColor(m_surface.data(), color.red(), color.green(), color.blue(), 120);
+
+    result = m_surface->DrawLine(m_surface.data(), x, y, x + w-1, y);
+    if (result != DFB_OK)
+        DirectFBError("QDirectFBBlitter::drawDebugRect()", result);
+    result = m_surface->DrawLine(m_surface.data(), x + w-1, y, x + w-1, y + h-1);
+    if (result != DFB_OK)
+        DirectFBError("QDirectFBBlitter::drawDebugRect()", result);
+    result = m_surface->DrawLine(m_surface.data(), x + w-1, y + h-1, x, y + h-1);
+    if (result != DFB_OK)
+        DirectFBError("QDirectFBBlitter::drawDebugRect()", result);
+    result = m_surface->DrawLine(m_surface.data(), x, y + h-1, x, y);
+    if (result != DFB_OK)
+        DirectFBError("QDirectFBBlitter::drawDebugRect()", result);
+
+    m_surface->SetColor(m_surface.data(), color.red(), color.green(), color.blue(), 10);
+    result = m_surface->FillRectangle(m_surface.data(), x, y, w, h);
+    if (result != DFB_OK)
+        DirectFBError("QDirectFBBlitter::drawDebugRect()", result);
+}
+
+void QDirectFbTextureGlyphCache::resizeTextureData(int width, int height)
+{
+    m_surface.reset();;
+    QImageTextureGlyphCache::resizeTextureData(width, height);
+}
+
+IDirectFBSurface *QDirectFbTextureGlyphCache::sourceSurface()
+{
+    if (m_surface.isNull()) {
+        const QImage &source = image();
+        DFBSurfaceDescription desc;
+        memset(&desc, 0, sizeof(desc));
+        desc.flags = DFBSurfaceDescriptionFlags(DSDESC_WIDTH | DSDESC_HEIGHT | DSDESC_PIXELFORMAT | DSDESC_PREALLOCATED | DSDESC_CAPS);
+        desc.width = source.width();
+        desc.height = source.height();
+        desc.caps = DSCAPS_SYSTEMONLY;
+
+        switch (source.format()) {
+        case QImage::Format_Mono:
+            desc.pixelformat = DSPF_A1;
+            break;
+        case QImage::Format_Indexed8:
+            desc.pixelformat = DSPF_A8;
+            break;
+        default:
+            qFatal("QDirectFBTextureGlyphCache: Unsupported source texture image format.");
+            break;
+        }
+
+        desc.preallocated[0].data = const_cast<void*>(static_cast<const void*>(source.bits()));
+        desc.preallocated[0].pitch = source.bytesPerLine();
+        desc.preallocated[1].data = 0;
+        desc.preallocated[1].pitch = 0;
+
+        IDirectFB *dfb = QDirectFbConvenience::dfbInterface();
+        dfb->CreateSurface(dfb , &desc, m_surface.outPtr());
+    }
+    return m_surface.data();
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/directfb/qdirectfbblitter.h b/src/plugins/platforms/directfb/qdirectfbblitter.h
index 0255040729..0b5449edd5 100644
--- a/src/plugins/platforms/directfb/qdirectfbblitter.h
+++ b/src/plugins/platforms/directfb/qdirectfbblitter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,6 +53,7 @@ public:
     virtual void drawPixmap(const QRectF &rect, const QPixmap &pixmap, const QRectF &subrect);
     void alphaFillRect(const QRectF &rect, const QColor &color, QPainter::CompositionMode cmode);
     void drawPixmapOpacity(const QRectF &rect, const QPixmap &pixmap, const QRectF &subrect, QPainter::CompositionMode cmode, qreal opacity);
+    virtual bool drawCachedGlyphs(const QPaintEngineState *state, QFontEngine::GlyphFormat glyphFormat, int numGlyphs, const glyph_t *glyphs, const QFixedPoint *positions, QFontEngine *fontEngine);
 
     IDirectFBSurface *dfbSurface() const;
 
@@ -78,7 +71,10 @@ protected:
     friend class QDirectFbConvenience;
 
 private:
+    void drawDebugRect(const QRect &rect, const QColor &color);
+
     bool m_premult;
+    bool m_debugPaint;
 };
 
 class QDirectFbBlitterPlatformPixmap : public QBlittablePlatformPixmap
@@ -110,6 +106,21 @@ inline IDirectFBSurface *QDirectFbBlitter::dfbSurface() const
     return m_surface.data();
 }
 
+class QDirectFbTextureGlyphCache : public QImageTextureGlyphCache
+{
+public:
+    QDirectFbTextureGlyphCache(QFontEngine::GlyphFormat format, const QTransform &matrix)
+        : QImageTextureGlyphCache(format, matrix)
+    {}
+
+    virtual void resizeTextureData(int width, int height);
+
+    IDirectFBSurface *sourceSurface();
+
+private:
+    QDirectFBPointer<IDirectFBSurface> m_surface;
+};
+
 QT_END_NAMESPACE
 
 #endif // QDIRECTFBBLITTER_H
diff --git a/src/plugins/platforms/directfb/qdirectfbconvenience.cpp b/src/plugins/platforms/directfb/qdirectfbconvenience.cpp
index 16510095db..c287388aa8 100644
--- a/src/plugins/platforms/directfb/qdirectfbconvenience.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbconvenience.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbconvenience.h b/src/plugins/platforms/directfb/qdirectfbconvenience.h
index cdb62db5da..e2dfb6a505 100644
--- a/src/plugins/platforms/directfb/qdirectfbconvenience.h
+++ b/src/plugins/platforms/directfb/qdirectfbconvenience.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbcursor.cpp b/src/plugins/platforms/directfb/qdirectfbcursor.cpp
index b03af51b1a..a6ef0eb09a 100644
--- a/src/plugins/platforms/directfb/qdirectfbcursor.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbcursor.h b/src/plugins/platforms/directfb/qdirectfbcursor.h
index 9079da4afe..aa5abda442 100644
--- a/src/plugins/platforms/directfb/qdirectfbcursor.h
+++ b/src/plugins/platforms/directfb/qdirectfbcursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbeglhooks.h b/src/plugins/platforms/directfb/qdirectfbeglhooks.h
index b05662af1c..742ebc3ba1 100644
--- a/src/plugins/platforms/directfb/qdirectfbeglhooks.h
+++ b/src/plugins/platforms/directfb/qdirectfbeglhooks.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbeglhooks_stub.cpp b/src/plugins/platforms/directfb/qdirectfbeglhooks_stub.cpp
index 0955c6979c..f7781a66b4 100644
--- a/src/plugins/platforms/directfb/qdirectfbeglhooks_stub.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbeglhooks_stub.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbglcontext.cpp b/src/plugins/platforms/directfb/qdirectfbglcontext.cpp
index 9a5f9739b3..d408af8263 100644
--- a/src/plugins/platforms/directfb/qdirectfbglcontext.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbglcontext.h b/src/plugins/platforms/directfb/qdirectfbglcontext.h
index 68b4c65b4f..26c5181751 100644
--- a/src/plugins/platforms/directfb/qdirectfbglcontext.h
+++ b/src/plugins/platforms/directfb/qdirectfbglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbinput.cpp b/src/plugins/platforms/directfb/qdirectfbinput.cpp
index 49dc45f04a..759b8fbd83 100644
--- a/src/plugins/platforms/directfb/qdirectfbinput.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbinput.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -154,7 +146,7 @@ void QDirectFbInput::handleEvents()
 void QDirectFbInput::handleMouseEvents(const DFBEvent &event)
 {
     QPoint p(event.window.x, event.window.y);
-    QPoint globalPos = globalPoint(event);
+    QPoint globalPos(event.window.cx, event.window.cy);
     Qt::MouseButtons buttons = QDirectFbConvenience::mouseButtons(event.window.buttons);
 
     QDirectFBPointer<IDirectFBDisplayLayer> layer(QDirectFbConvenience::dfbDisplayLayer());
@@ -169,8 +161,8 @@ void QDirectFbInput::handleMouseEvents(const DFBEvent &event)
 
 void QDirectFbInput::handleWheelEvent(const DFBEvent &event)
 {
-    QPoint p(event.window.cx, event.window.cy);
-    QPoint globalPos = globalPoint(event);
+    QPoint p(event.window.x, event.window.y);
+    QPoint globalPos(event.window.cx, event.window.cy);
     long timestamp = (event.window.timestamp.tv_sec*1000) + (event.window.timestamp.tv_usec/1000);
     QWindow *tlw = m_tlwMap.value(event.window.window_id);
     QWindowSystemInterface::handleWheelEvent(tlw, timestamp, p, globalPos,
@@ -227,13 +219,4 @@ void QDirectFbInput::handleGeometryEvent(const DFBEvent &event)
     QWindowSystemInterface::handleGeometryChange(tlw, rect);
 }
 
-inline QPoint QDirectFbInput::globalPoint(const DFBEvent &event) const
-{
-    QDirectFBPointer<IDirectFBWindow> window;
-    m_dfbDisplayLayer->GetWindow(m_dfbDisplayLayer, event.window.window_id, window.outPtr());
-    int x,y;
-    window->GetPosition(window.data(), &x, &y);
-    return QPoint(event.window.cx +x, event.window.cy + y);
-}
-
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/directfb/qdirectfbinput.h b/src/plugins/platforms/directfb/qdirectfbinput.h
index 0ce45823e1..c607fc236d 100644
--- a/src/plugins/platforms/directfb/qdirectfbinput.h
+++ b/src/plugins/platforms/directfb/qdirectfbinput.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,7 +67,6 @@ private:
     void handleGotFocusEvent(const DFBEvent &event);
     void handleCloseEvent(const DFBEvent& event);
     void handleGeometryEvent(const DFBEvent& event);
-    inline QPoint globalPoint(const DFBEvent &event) const;
 
 
     IDirectFB *m_dfbInterface;
diff --git a/src/plugins/platforms/directfb/qdirectfbintegration.cpp b/src/plugins/platforms/directfb/qdirectfbintegration.cpp
index 3d1b79ef38..3c8bc1e2bd 100644
--- a/src/plugins/platforms/directfb/qdirectfbintegration.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,6 +40,7 @@
 
 #include <QtPlatformSupport/private/qgenericunixfontdatabase_p.h>
 #include <QtPlatformSupport/private/qgenericunixeventdispatcher_p.h>
+#include <QtPlatformSupport/private/qgenericunixservices_p.h>
 
 #include <QtGui/private/qpixmap_blitter_p.h>
 #include <QtGui/private/qpixmap_raster_p.h>
@@ -56,11 +49,13 @@
 #include <QtCore/QCoreApplication>
 #include <QtCore/QThread>
 #include <QtCore/QAbstractEventDispatcher>
+#include <qpa/qplatforminputcontextfactory_p.h>
 
 QT_BEGIN_NAMESPACE
 
 QDirectFbIntegration::QDirectFbIntegration()
     : m_fontDb(new QGenericUnixFontDatabase())
+    , m_services(new QGenericUnixServices)
 {
 }
 
@@ -69,6 +64,21 @@ void QDirectFbIntegration::connectToDirectFb()
     initializeDirectFB();
     initializeScreen();
     initializeInput();
+
+    m_inputContext = QPlatformInputContextFactory::create();
+}
+
+bool QDirectFbIntegration::hasCapability(Capability cap) const
+{
+    switch (cap) {
+    case ThreadedPixmaps: return true;
+    case MultipleWindows: return true;
+#ifdef DIRECTFB_GL_EGL
+    case OpenGL: return true;
+    case ThreadedOpenGL: return true;
+#endif
+    default: return QPlatformIntegration::hasCapability(cap);
+    }
 }
 
 void QDirectFbIntegration::initializeDirectFB()
@@ -142,4 +152,14 @@ QPlatformFontDatabase *QDirectFbIntegration::fontDatabase() const
     return m_fontDb.data();
 }
 
+QPlatformServices *QDirectFbIntegration::services() const
+{
+    return m_services.data();
+}
+
+QPlatformNativeInterface *QDirectFbIntegration::nativeInterface() const
+{
+    return const_cast<QDirectFbIntegration *>(this);
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/directfb/qdirectfbintegration.h b/src/plugins/platforms/directfb/qdirectfbintegration.h
index b49600bed9..9592f90b1c 100644
--- a/src/plugins/platforms/directfb/qdirectfbintegration.h
+++ b/src/plugins/platforms/directfb/qdirectfbintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,6 +38,7 @@
 #include "qdirectfbscreen.h"
 
 #include <qpa/qplatformintegration.h>
+#include <qpa/qplatformnativeinterface.h>
 #include <directfb.h>
 #include <directfb_version.h>
 
@@ -54,7 +47,7 @@ QT_BEGIN_NAMESPACE
 class QThread;
 class QAbstractEventDispatcher;
 
-class QDirectFbIntegration : public QPlatformIntegration
+class QDirectFbIntegration : public QPlatformIntegration, public QPlatformNativeInterface
 {
 public:
     QDirectFbIntegration();
@@ -62,12 +55,16 @@ public:
 
     void connectToDirectFb();
 
+    bool hasCapability(Capability cap) const;
     QPlatformPixmap *createPlatformPixmap(QPlatformPixmap::PixelType type) const;
     QPlatformWindow *createPlatformWindow(QWindow *window) const;
     QPlatformBackingStore *createPlatformBackingStore(QWindow *window) const;
     QAbstractEventDispatcher *createEventDispatcher() const;
 
     QPlatformFontDatabase *fontDatabase() const;
+    QPlatformServices *services() const;
+    QPlatformInputContext *inputContext() const { return m_inputContext; }
+    QPlatformNativeInterface *nativeInterface() const;
 
 protected:
     virtual void initializeDirectFB();
@@ -80,6 +77,8 @@ protected:
     QScopedPointer<QDirectFbInput> m_input;
     QScopedPointer<QThread> m_inputRunner;
     QScopedPointer<QPlatformFontDatabase> m_fontDb;
+    QScopedPointer<QPlatformServices> m_services;
+    QPlatformInputContext *m_inputContext;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/directfb/qdirectfbscreen.cpp b/src/plugins/platforms/directfb/qdirectfbscreen.cpp
index 8a0bec736c..fea4e137ca 100644
--- a/src/plugins/platforms/directfb/qdirectfbscreen.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbscreen.h b/src/plugins/platforms/directfb/qdirectfbscreen.h
index 56f261760c..40bd18216a 100644
--- a/src/plugins/platforms/directfb/qdirectfbscreen.h
+++ b/src/plugins/platforms/directfb/qdirectfbscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/directfb/qdirectfbwindow.cpp b/src/plugins/platforms/directfb/qdirectfbwindow.cpp
index 670a955bd6..b3e5c3bdcf 100644
--- a/src/plugins/platforms/directfb/qdirectfbwindow.cpp
+++ b/src/plugins/platforms/directfb/qdirectfbwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,27 +59,39 @@ void QDirectFbWindow::createDirectFBWindow()
 
     DFBWindowDescription description;
     memset(&description,0,sizeof(DFBWindowDescription));
-    description.flags = DFBWindowDescriptionFlags(DWDESC_WIDTH|DWDESC_HEIGHT|DWDESC_POSX|DWDESC_POSY|DWDESC_SURFACE_CAPS
-                                                  |DWDESC_OPTIONS
-                                                  |DWDESC_CAPS);
-    description.width = qMax(1, window()->width());
-    description.height = qMax(1, window()->height());
-    description.posx = window()->x();
-    description.posy = window()->y();
-
-    if (layerConfig.surface_caps & DSCAPS_PREMULTIPLIED)
-        description.surface_caps = DSCAPS_PREMULTIPLIED;
-    description.pixelformat = layerConfig.pixelformat;
-
-    description.options = DFBWindowOptions(DWOP_ALPHACHANNEL);
-    description.caps = DFBWindowCapabilities(DWCAPS_DOUBLEBUFFER|DWCAPS_ALPHACHANNEL);
-
-    DFBResult result = layer->CreateWindow(layer, &description, m_dfbWindow.outPtr());
-    if (result != DFB_OK)
-        DirectFBError("QDirectFbWindow: failed to create window", result);
-
-    m_dfbWindow->SetOpacity(m_dfbWindow.data(), 0xff);
-    m_inputHandler->addWindow(m_dfbWindow.data(), window());
+
+    if (window()->type() == Qt::Desktop) {
+        QRect fullscreenRect(QPoint(), screen()->availableGeometry().size());
+        window()->setGeometry(fullscreenRect);
+
+        DFBResult result = layer->CreateWindow(layer, &description, m_dfbWindow.outPtr());
+        if (result != DFB_OK)
+            DirectFBError("QDirectFbWindow: failed to create window", result);
+
+    } else {
+        description.flags = DFBWindowDescriptionFlags(DWDESC_WIDTH|DWDESC_HEIGHT|DWDESC_POSX|DWDESC_POSY|DWDESC_SURFACE_CAPS
+                                                      |DWDESC_OPTIONS
+                                                      |DWDESC_CAPS);
+        description.width = qMax(1, window()->width());
+        description.height = qMax(1, window()->height());
+        description.posx = window()->x();
+        description.posy = window()->y();
+
+        if (layerConfig.surface_caps & DSCAPS_PREMULTIPLIED)
+            description.surface_caps = DSCAPS_PREMULTIPLIED;
+        description.pixelformat = layerConfig.pixelformat;
+
+        description.options = DFBWindowOptions(DWOP_ALPHACHANNEL);
+        description.caps = DFBWindowCapabilities(DWCAPS_DOUBLEBUFFER|DWCAPS_ALPHACHANNEL);
+
+
+        DFBResult result = layer->CreateWindow(layer, &description, m_dfbWindow.outPtr());
+        if (result != DFB_OK)
+            DirectFBError("QDirectFbWindow: failed to create window", result);
+
+        m_dfbWindow->SetOpacity(m_dfbWindow.data(), 0xff);
+        m_inputHandler->addWindow(m_dfbWindow.data(), window());
+    }
 }
 
 QDirectFbWindow::~QDirectFbWindow()
@@ -98,21 +102,9 @@ QDirectFbWindow::~QDirectFbWindow()
 
 void QDirectFbWindow::setGeometry(const QRect &rect)
 {
-//    bool isMoveOnly = (rect.topLeft() != geometry().topLeft()) && (rect.size() == geometry().size());
-
     QPlatformWindow::setGeometry(rect);
-    if (window()->isVisible()) {
-        m_dfbWindow->SetBounds(m_dfbWindow.data(), rect.x(),rect.y(),
-                               rect.width(), rect.height());
-// ### TODO port, verify if this is needed
-#if 0
-        //Hack. When moving since the WindowSurface of a window becomes invalid when moved
-        if (isMoveOnly) { //if resize then windowsurface is updated.
-            widget()->windowSurface()->resize(rect.size());
-            window()->update();
-        }
-#endif
-    }
+    m_dfbWindow->SetBounds(m_dfbWindow.data(), rect.x(),rect.y(),
+                           rect.width(), rect.height());
 }
 
 void QDirectFbWindow::setOpacity(qreal level)
@@ -123,21 +115,23 @@ void QDirectFbWindow::setOpacity(qreal level)
 
 void QDirectFbWindow::setVisible(bool visible)
 {
-    if (visible) {
-        int x = geometry().x();
-        int y = geometry().y();
-        m_dfbWindow->MoveTo(m_dfbWindow.data(), x, y);
-    } else {
-        QDirectFBPointer<IDirectFBDisplayLayer> displayLayer;
-        QDirectFbConvenience::dfbInterface()->GetDisplayLayer(QDirectFbConvenience::dfbInterface(), DLID_PRIMARY, displayLayer.outPtr());
+    if (window()->type() != Qt::Desktop) {
+        if (visible) {
+            int x = geometry().x();
+            int y = geometry().y();
+            m_dfbWindow->MoveTo(m_dfbWindow.data(), x, y);
+        } else {
+            QDirectFBPointer<IDirectFBDisplayLayer> displayLayer;
+            QDirectFbConvenience::dfbInterface()->GetDisplayLayer(QDirectFbConvenience::dfbInterface(), DLID_PRIMARY, displayLayer.outPtr());
+
+            DFBDisplayLayerConfig config;
+            displayLayer->GetConfiguration(displayLayer.data(), &config);
+            m_dfbWindow->MoveTo(m_dfbWindow.data(), config. width + 1, config.height + 1);
+        }
 
-        DFBDisplayLayerConfig config;
-        displayLayer->GetConfiguration(displayLayer.data(), &config);
-        m_dfbWindow->MoveTo(m_dfbWindow.data(), config. width + 1, config.height + 1);
+        if (window()->isTopLevel() && visible)
+            QPlatformWindow::setVisible(visible);
     }
-
-    if (window()->isTopLevel() && visible)
-        QWindowSystemInterface::handleExposeEvent(window(), window()->geometry());
 }
 
 void QDirectFbWindow::setWindowFlags(Qt::WindowFlags flags)
@@ -158,12 +152,14 @@ void QDirectFbWindow::setWindowFlags(Qt::WindowFlags flags)
 
 void QDirectFbWindow::raise()
 {
-    m_dfbWindow->RaiseToTop(m_dfbWindow.data());
+    if (window()->type() != Qt::Desktop)
+        m_dfbWindow->RaiseToTop(m_dfbWindow.data());
 }
 
 void QDirectFbWindow::lower()
 {
-    m_dfbWindow->LowerToBottom(m_dfbWindow.data());
+    if (window()->type() != Qt::Desktop)
+        m_dfbWindow->LowerToBottom(m_dfbWindow.data());
 }
 
 WId QDirectFbWindow::winId() const
diff --git a/src/plugins/platforms/directfb/qdirectfbwindow.h b/src/plugins/platforms/directfb/qdirectfbwindow.h
index 1ad20b3f93..6fce474f92 100644
--- a/src/plugins/platforms/directfb/qdirectfbwindow.h
+++ b/src/plugins/platforms/directfb/qdirectfbwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/eglfs/eglfs.pri b/src/plugins/platforms/eglfs/eglfs.pri
index 6e3ba54b97..6f463ba7d9 100644
--- a/src/plugins/platforms/eglfs/eglfs.pri
+++ b/src/plugins/platforms/eglfs/eglfs.pri
@@ -8,6 +8,11 @@ DEFINES += MESA_EGL_NO_X11_HEADERS
 # EGLFS_PLATFORM_HOOKS_SOURCES += qeglfshooks_x11.cpp
 # LIBS += -lX11 -lX11-xcb -lxcb
 
+# Uncomment these to enable the KMS hooks.
+# EGLFS_PLATFORM_HOOKS_SOURCES += qeglfshooks_kms.cpp
+# CONFIG += link_pkgconfig
+# PKGCONFIG += libdrm gbm
+
 SOURCES +=  $$PWD/qeglfsintegration.cpp \
             $$PWD/qeglfswindow.cpp \
             $$PWD/qeglfsscreen.cpp \
diff --git a/src/plugins/platforms/eglfs/main.cpp b/src/plugins/platforms/eglfs/main.cpp
index 245f2a6236..be91fbf3c3 100644
--- a/src/plugins/platforms/eglfs/main.cpp
+++ b/src/plugins/platforms/eglfs/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/eglfs/qeglfscontext.cpp b/src/plugins/platforms/eglfs/qeglfscontext.cpp
index 4d443b91e3..6216fa8575 100644
--- a/src/plugins/platforms/eglfs/qeglfscontext.cpp
+++ b/src/plugins/platforms/eglfs/qeglfscontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,7 +34,6 @@
 #include "qeglfscontext.h"
 #include "qeglfswindow.h"
 #include "qeglfshooks.h"
-#include "qeglfsintegration.h"
 
 #include <QtPlatformSupport/private/qeglconvenience_p.h>
 #include <QtPlatformSupport/private/qeglpbuffer_p.h>
@@ -52,9 +43,9 @@
 
 QT_BEGIN_NAMESPACE
 
-QEglFSContext::QEglFSContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display)
-    : QEGLPlatformContext(format, share, display,
-                          QEglFSIntegration::chooseConfig(display, format))
+QEglFSContext::QEglFSContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display,
+                             EGLConfig *config, const QVariant &nativeHandle)
+    : QEGLPlatformContext(format, share, display, config, nativeHandle)
 {
 }
 
diff --git a/src/plugins/platforms/eglfs/qeglfscontext.h b/src/plugins/platforms/eglfs/qeglfscontext.h
index 5d406f09f1..fcdad5ed22 100644
--- a/src/plugins/platforms/eglfs/qeglfscontext.h
+++ b/src/plugins/platforms/eglfs/qeglfscontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,13 +35,15 @@
 #define QEGLFSCONTEXT_H
 
 #include <QtPlatformSupport/private/qeglplatformcontext_p.h>
+#include <QtCore/QVariant>
 
 QT_BEGIN_NAMESPACE
 
 class QEglFSContext : public QEGLPlatformContext
 {
 public:
-    QEglFSContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display);
+    QEglFSContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display,
+                  EGLConfig *config, const QVariant &nativeHandle);
     EGLSurface eglSurfaceForPlatformSurface(QPlatformSurface *surface) Q_DECL_OVERRIDE;
     void swapBuffers(QPlatformSurface *surface) Q_DECL_OVERRIDE;
 };
diff --git a/src/plugins/platforms/eglfs/qeglfshooks.h b/src/plugins/platforms/eglfs/qeglfshooks.h
index 67f4d1803d..c51af17a56 100644
--- a/src/plugins/platforms/eglfs/qeglfshooks.h
+++ b/src/plugins/platforms/eglfs/qeglfshooks.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/eglfs/qeglfshooks_kms.cpp b/src/plugins/platforms/eglfs/qeglfshooks_kms.cpp
new file mode 100644
index 0000000000..9e5d624d87
--- /dev/null
+++ b/src/plugins/platforms/eglfs/qeglfshooks_kms.cpp
@@ -0,0 +1,422 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the qmake spec of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qeglfshooks.h"
+#include <QtPlatformSupport/private/qdevicediscovery_p.h>
+#include <QtCore/private/qcore_unix_p.h>
+#include <QtCore/QScopedPointer>
+#include <QtGui/qpa/qplatformwindow.h>
+
+#include <xf86drm.h>
+#include <xf86drmMode.h>
+#include <gbm.h>
+
+QT_USE_NAMESPACE
+
+class QEglKmsHooks : public QEglFSHooks
+{
+public:
+    QEglKmsHooks();
+
+    void platformInit() Q_DECL_OVERRIDE;
+    void platformDestroy() Q_DECL_OVERRIDE;
+    EGLNativeDisplayType platformDisplay() const Q_DECL_OVERRIDE;
+    QSizeF physicalScreenSize() const Q_DECL_OVERRIDE;
+    QSize screenSize() const Q_DECL_OVERRIDE;
+    int screenDepth() const Q_DECL_OVERRIDE;
+    QSurfaceFormat surfaceFormatFor(const QSurfaceFormat &inputFormat) const Q_DECL_OVERRIDE;
+    EGLNativeWindowType createNativeWindow(QPlatformWindow *platformWindow,
+                                           const QSize &size,
+                                           const QSurfaceFormat &format) Q_DECL_OVERRIDE;
+    void destroyNativeWindow(EGLNativeWindowType window) Q_DECL_OVERRIDE;
+    bool hasCapability(QPlatformIntegration::Capability cap) const Q_DECL_OVERRIDE;
+    void waitForVSync() const Q_DECL_OVERRIDE;
+
+    void waitForVSyncImpl();
+    bool setup_kms();
+
+    struct FrameBuffer {
+        FrameBuffer() : fb(0) {}
+        uint32_t fb;
+    };
+    FrameBuffer *framebufferForBufferObject(gbm_bo *bo);
+
+private:
+    // device bits
+    QByteArray m_device;
+    int m_dri_fd;
+    gbm_device *m_gbm_device;
+
+    // KMS bits
+    drmModeConnector *m_drm_connector;
+    drmModeEncoder *m_drm_encoder;
+    drmModeModeInfo m_drm_mode;
+    quint32 m_drm_crtc;
+
+    // Drawing bits
+    gbm_surface *m_gbm_surface;
+};
+
+static QEglKmsHooks kms_hooks;
+QEglFSHooks *platformHooks = &kms_hooks;
+
+QEglKmsHooks::QEglKmsHooks()
+    : m_dri_fd(-1)
+    , m_gbm_device(Q_NULLPTR)
+    , m_drm_connector(Q_NULLPTR)
+    , m_drm_encoder(Q_NULLPTR)
+    , m_drm_crtc(0)
+    , m_gbm_surface(Q_NULLPTR)
+{
+
+}
+
+void QEglKmsHooks::platformInit()
+{
+    QDeviceDiscovery *d = QDeviceDiscovery::create(QDeviceDiscovery::Device_VideoMask);
+    QStringList devices = d->scanConnectedDevices();
+    d->deleteLater();
+
+    if (devices.isEmpty())
+        qFatal("Could not find DRM device!");
+
+    m_device = devices.first().toLocal8Bit();
+    m_dri_fd = qt_safe_open(m_device.constData(), O_RDWR | O_CLOEXEC);
+    if (m_dri_fd == -1) {
+        qErrnoWarning("Could not open DRM device %s", m_device.constData());
+        qFatal("DRM device required, aborting.");
+    }
+
+    if (!setup_kms())
+        qFatal("Could not set up KMS on device %s!", m_device.constData());
+
+    m_gbm_device = gbm_create_device(m_dri_fd);
+    if (!m_gbm_device)
+        qFatal("Could not initialize gbm on device %s!", m_device.constData());
+}
+
+void QEglKmsHooks::platformDestroy()
+{
+    gbm_device_destroy(m_gbm_device);
+    m_gbm_device = Q_NULLPTR;
+
+    if (qt_safe_close(m_dri_fd) == -1)
+        qErrnoWarning("Could not close DRM device %s", m_device.constData());
+
+    m_dri_fd = -1;
+}
+
+EGLNativeDisplayType QEglKmsHooks::platformDisplay() const
+{
+    return static_cast<EGLNativeDisplayType>(m_gbm_device);
+}
+
+QSizeF QEglKmsHooks::physicalScreenSize() const
+{
+    return QSizeF(m_drm_connector->mmWidth,
+                  m_drm_connector->mmHeight);
+}
+
+QSize QEglKmsHooks::screenSize() const
+{
+    return QSize(m_drm_mode.hdisplay,
+                 m_drm_mode.vdisplay);
+}
+
+int QEglKmsHooks::screenDepth() const
+{
+    return 32;
+}
+
+QSurfaceFormat QEglKmsHooks::surfaceFormatFor(const QSurfaceFormat &inputFormat) const
+{
+    QSurfaceFormat format(inputFormat);
+    format.setRenderableType(QSurfaceFormat::OpenGLES);
+    format.setSwapBehavior(QSurfaceFormat::DoubleBuffer);
+    format.setRedBufferSize(8);
+    format.setGreenBufferSize(8);
+    format.setBlueBufferSize(8);
+    return format;
+}
+
+EGLNativeWindowType QEglKmsHooks::createNativeWindow(QPlatformWindow *platformWindow,
+                                                     const QSize &size,
+                                                     const QSurfaceFormat &format)
+{
+    Q_UNUSED(platformWindow);
+    Q_UNUSED(size);
+    Q_UNUSED(format);
+
+    if (m_gbm_surface) {
+        qWarning("Only single window apps supported!");
+        return 0;
+    }
+
+    m_gbm_surface = gbm_surface_create(m_gbm_device,
+                                       screenSize().width(),
+                                       screenSize().height(),
+                                       GBM_FORMAT_XRGB8888,
+                                       GBM_BO_USE_SCANOUT | GBM_BO_USE_RENDERING);
+    if (!m_gbm_surface)
+        qFatal("Could not initialize GBM surface");
+
+    return reinterpret_cast<EGLNativeWindowType>(m_gbm_surface);
+}
+
+void QEglKmsHooks::destroyNativeWindow(EGLNativeWindowType window)
+{
+    gbm_surface *surface = reinterpret_cast<gbm_surface *>(window);
+    if (surface == m_gbm_surface)
+        m_gbm_surface = Q_NULLPTR;
+    gbm_surface_destroy(surface);
+}
+
+bool QEglKmsHooks::hasCapability(QPlatformIntegration::Capability cap) const
+{
+    switch (cap) {
+    case QPlatformIntegration::ThreadedPixmaps:
+    case QPlatformIntegration::OpenGL:
+    case QPlatformIntegration::ThreadedOpenGL:
+    case QPlatformIntegration::BufferQueueingOpenGL:
+        return true;
+    default:
+        return false;
+    }
+}
+
+static void gbm_bo_destroyed_callback(gbm_bo *bo, void *data)
+{
+    QEglKmsHooks::FrameBuffer *fb = static_cast<QEglKmsHooks::FrameBuffer *>(data);
+
+    if (fb->fb) {
+        gbm_device *device = gbm_bo_get_device(bo);
+        drmModeRmFB(gbm_device_get_fd(device), fb->fb);
+    }
+
+    delete fb;
+}
+
+QEglKmsHooks::FrameBuffer *QEglKmsHooks::framebufferForBufferObject(gbm_bo *bo)
+{
+    {
+        FrameBuffer *fb = static_cast<FrameBuffer *>(gbm_bo_get_user_data(bo));
+        if (fb)
+            return fb;
+    }
+
+    uint32_t width = gbm_bo_get_width(bo);
+    uint32_t height = gbm_bo_get_height(bo);
+    uint32_t stride = gbm_bo_get_stride(bo);
+    uint32_t handle = gbm_bo_get_handle(bo).u32;
+
+    QScopedPointer<FrameBuffer> fb(new FrameBuffer);
+
+    int ret = drmModeAddFB(m_dri_fd, width, height, 24, 32,
+                           stride, handle, &fb->fb);
+
+    if (ret) {
+        qWarning("Failed to create KMS FB!");
+        return Q_NULLPTR;
+    }
+
+    gbm_bo_set_user_data(bo, fb.data(), gbm_bo_destroyed_callback);
+    return fb.take();
+}
+
+static void page_flip_handler(int fd,
+                              unsigned int sequence,
+                              unsigned int tv_sec,
+                              unsigned int tv_usec,
+                              void *user_data)
+{
+    Q_UNUSED(fd);
+    Q_UNUSED(sequence);
+    Q_UNUSED(tv_sec);
+    Q_UNUSED(tv_usec);
+
+    // We are no longer flipping
+    *static_cast<bool *>(user_data) = false;
+}
+
+void QEglKmsHooks::waitForVSync() const
+{
+    const_cast<QEglKmsHooks*>(this)->waitForVSyncImpl();
+}
+
+void QEglKmsHooks::waitForVSyncImpl()
+{
+    if (!m_gbm_surface) {
+        qWarning("Cannot sync before platform init!");
+        return;
+    }
+
+    if (!gbm_surface_has_free_buffers(m_gbm_surface)) {
+        qWarning("Out of free GBM buffers!");
+        return;
+    }
+
+    gbm_bo *front_buffer = gbm_surface_lock_front_buffer(m_gbm_surface);
+    if (!front_buffer) {
+        qWarning("Could not lock GBM surface front buffer!");
+        return;
+    }
+
+    QEglKmsHooks::FrameBuffer *fb = framebufferForBufferObject(front_buffer);
+
+    int ret = drmModeSetCrtc(m_dri_fd,
+                             m_drm_crtc,
+                             fb->fb,
+                             0, 0,
+                             &m_drm_connector->connector_id, 1,
+                             &m_drm_mode);
+    if (ret) {
+        qErrnoWarning("Could not set DRM mode!");
+        return;
+    }
+
+    bool flipping = true;
+    ret = drmModePageFlip(m_dri_fd,
+                          m_drm_encoder->crtc_id,
+                          fb->fb,
+                          DRM_MODE_PAGE_FLIP_EVENT,
+                          &flipping);
+    if (ret) {
+        qErrnoWarning("Could not queue DRM page flip!");
+        return;
+    }
+
+    drmEventContext drmEvent = {
+        DRM_EVENT_CONTEXT_VERSION,
+        Q_NULLPTR,          // vblank handler
+        page_flip_handler   // page flip handler
+    };
+
+    fd_set fds;
+    FD_ZERO(&fds);
+    FD_SET(m_dri_fd, &fds);
+
+    time_t start, cur;
+    time(&start);
+
+    while (flipping && (time(&cur) < start + 1)) {
+        timespec v;
+        memset(&v, 0, sizeof(v));
+        v.tv_sec = start + 1 - cur;
+
+        ret = qt_safe_select(m_dri_fd + 1, &fds, Q_NULLPTR, Q_NULLPTR, &v);
+
+        if (ret == 0) {
+            // timeout
+            break;
+        } else if (ret == -1) {
+            qErrnoWarning("Error while selecting on DRM fd");
+            break;
+        } else if (drmHandleEvent(m_dri_fd, &drmEvent)) {
+            qWarning("Could not handle DRM event!");
+        }
+    }
+
+    gbm_surface_release_buffer(m_gbm_surface, front_buffer);
+}
+
+bool QEglKmsHooks::setup_kms()
+{
+    drmModeRes *resources;
+    drmModeConnector *connector;
+    drmModeEncoder *encoder;
+    quint32 crtc = 0;
+    int i;
+
+    resources = drmModeGetResources(m_dri_fd);
+    if (!resources) {
+       qWarning("drmModeGetResources failed");
+       return false;
+    }
+
+    for (i = 0; i < resources->count_connectors; i++) {
+       connector = drmModeGetConnector(m_dri_fd, resources->connectors[i]);
+       if (connector == NULL)
+          continue;
+
+       if (connector->connection == DRM_MODE_CONNECTED &&
+           connector->count_modes > 0) {
+          break;
+       }
+
+       drmModeFreeConnector(connector);
+    }
+
+    if (i == resources->count_connectors) {
+       qWarning("No currently active connector found.");
+       return false;
+    }
+
+    for (i = 0; i < resources->count_encoders; i++) {
+       encoder = drmModeGetEncoder(m_dri_fd, resources->encoders[i]);
+
+       if (encoder == NULL)
+          continue;
+
+       if (encoder->encoder_id == connector->encoder_id)
+          break;
+
+       drmModeFreeEncoder(encoder);
+    }
+
+    for (int j = 0; j < resources->count_crtcs; j++) {
+        if ((encoder->possible_crtcs & (1 << j))) {
+            crtc = resources->crtcs[j];
+            break;
+        }
+    }
+
+    if (crtc == 0)
+        qFatal("No suitable CRTC available");
+
+    m_drm_connector = connector;
+    m_drm_encoder = encoder;
+    m_drm_mode = connector->modes[0];
+    m_drm_crtc = crtc;
+
+    drmModeFreeResources(resources);
+
+    return true;
+}
diff --git a/src/plugins/platforms/eglfs/qeglfshooks_stub.cpp b/src/plugins/platforms/eglfs/qeglfshooks_stub.cpp
index 4aa3f29260..b6b1be9244 100644
--- a/src/plugins/platforms/eglfs/qeglfshooks_stub.cpp
+++ b/src/plugins/platforms/eglfs/qeglfshooks_stub.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the qmake spec of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,8 +77,10 @@ void QEglFSHooks::platformInit()
 
     framebuffer = qt_safe_open(fbDev, O_RDONLY);
 
-    if (framebuffer == -1)
+    if (framebuffer == -1) {
         qWarning("EGLFS: Failed to open %s", qPrintable(fbDev));
+        qFatal("EGLFS: Can't continue without a display");
+    }
 }
 
 void QEglFSHooks::platformDestroy()
diff --git a/src/plugins/platforms/eglfs/qeglfshooks_x11.cpp b/src/plugins/platforms/eglfs/qeglfshooks_x11.cpp
index a3f94fb5b4..b16857297c 100644
--- a/src/plugins/platforms/eglfs/qeglfshooks_x11.cpp
+++ b/src/plugins/platforms/eglfs/qeglfshooks_x11.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the qmake spec of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/eglfs/qeglfsintegration.cpp b/src/plugins/platforms/eglfs/qeglfsintegration.cpp
index 2941806f17..2a4eae3fe2 100644
--- a/src/plugins/platforms/eglfs/qeglfsintegration.cpp
+++ b/src/plugins/platforms/eglfs/qeglfsintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,6 +42,7 @@
 #include <QtPlatformSupport/private/qeglconvenience_p.h>
 #include <QtPlatformSupport/private/qeglplatformcontext_p.h>
 #include <QtPlatformSupport/private/qeglpbuffer_p.h>
+#include <QtPlatformHeaders/QEGLNativeContext>
 
 #include <qpa/qplatformwindow.h>
 #include <QtGui/QSurfaceFormat>
@@ -115,9 +108,19 @@ QEGLPlatformWindow *QEglFSIntegration::createWindow(QWindow *window) const
 
 QEGLPlatformContext *QEglFSIntegration::createContext(const QSurfaceFormat &format,
                                                       QPlatformOpenGLContext *shareContext,
-                                                      EGLDisplay display) const
+                                                      EGLDisplay display,
+                                                      QVariant *nativeHandle) const
 {
-    return new QEglFSContext(QEglFSHooks::hooks()->surfaceFormatFor(format), shareContext, display);
+    QEglFSContext *ctx;
+    QSurfaceFormat adjustedFormat = QEglFSHooks::hooks()->surfaceFormatFor(format);
+    if (!nativeHandle || nativeHandle->isNull()) {
+        EGLConfig config = QEglFSIntegration::chooseConfig(display, adjustedFormat);
+        ctx =  new QEglFSContext(adjustedFormat, shareContext, display, &config, QVariant());
+    } else {
+        ctx =  new QEglFSContext(adjustedFormat, shareContext, display, 0, *nativeHandle);
+    }
+    *nativeHandle = QVariant::fromValue<QEGLNativeContext>(QEGLNativeContext(ctx->eglContext(), display));
+    return ctx;
 }
 
 QPlatformOffscreenSurface *QEglFSIntegration::createOffscreenSurface(EGLDisplay display,
diff --git a/src/plugins/platforms/eglfs/qeglfsintegration.h b/src/plugins/platforms/eglfs/qeglfsintegration.h
index 99dda1ea96..d612a270f2 100644
--- a/src/plugins/platforms/eglfs/qeglfsintegration.h
+++ b/src/plugins/platforms/eglfs/qeglfsintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,7 +58,8 @@ protected:
     QEGLPlatformWindow *createWindow(QWindow *window) const Q_DECL_OVERRIDE;
     QEGLPlatformContext *createContext(const QSurfaceFormat &format,
                                        QPlatformOpenGLContext *shareContext,
-                                       EGLDisplay display) const Q_DECL_OVERRIDE;
+                                       EGLDisplay display,
+                                       QVariant *nativeHandle) const Q_DECL_OVERRIDE;
     QPlatformOffscreenSurface *createOffscreenSurface(EGLDisplay display,
                                                       const QSurfaceFormat &format,
                                                       QOffscreenSurface *surface) const Q_DECL_OVERRIDE;
diff --git a/src/plugins/platforms/eglfs/qeglfsscreen.cpp b/src/plugins/platforms/eglfs/qeglfsscreen.cpp
index 31f6ac5be6..cd68540581 100644
--- a/src/plugins/platforms/eglfs/qeglfsscreen.cpp
+++ b/src/plugins/platforms/eglfs/qeglfsscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/eglfs/qeglfsscreen.h b/src/plugins/platforms/eglfs/qeglfsscreen.h
index 13f7cfddd8..4938d66538 100644
--- a/src/plugins/platforms/eglfs/qeglfsscreen.h
+++ b/src/plugins/platforms/eglfs/qeglfsscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/eglfs/qeglfswindow.cpp b/src/plugins/platforms/eglfs/qeglfswindow.cpp
index 2d36c0b58e..c83b894089 100644
--- a/src/plugins/platforms/eglfs/qeglfswindow.cpp
+++ b/src/plugins/platforms/eglfs/qeglfswindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -82,8 +74,10 @@ void QEglFSWindow::create()
     // they will be composited onto the root window's surface.
     QEglFSScreen *screen = this->screen();
     if (screen->primarySurface() != EGL_NO_SURFACE) {
-        if (isRaster() && screen->compositingWindow())
+        if (isRaster() && screen->compositingWindow()) {
+            m_format = screen->compositingWindow()->format();
             return;
+        }
 
 #if !defined(Q_OS_ANDROID) || defined(Q_OS_ANDROID_NO_SDK)
         // We can have either a single OpenGL window or multiple raster windows.
@@ -96,7 +90,7 @@ void QEglFSWindow::create()
 
     m_flags |= HasNativeWindow;
     setGeometry(QRect()); // will become fullscreen
-    QWindowSystemInterface::handleExposeEvent(window(), geometry());
+    QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), geometry().size()));
 
     EGLDisplay display = static_cast<QEglFSScreen *>(screen)->display();
     QSurfaceFormat platformFormat = QEglFSHooks::hooks()->surfaceFormatFor(window()->requestedFormat());
@@ -166,8 +160,9 @@ void QEglFSWindow::resetSurface()
 void QEglFSWindow::setVisible(bool visible)
 {
     QList<QEGLPlatformWindow *> windows = screen()->windows();
+    QWindow *wnd = window();
 
-    if (window()->type() != Qt::Desktop) {
+    if (wnd->type() != Qt::Desktop) {
         if (visible) {
             screen()->addWindow(this);
         } else {
@@ -178,7 +173,7 @@ void QEglFSWindow::setVisible(bool visible)
         }
     }
 
-    QWindowSystemInterface::handleExposeEvent(window(), window()->geometry());
+    QWindowSystemInterface::handleExposeEvent(wnd, QRect(QPoint(0, 0), wnd->geometry().size()));
 
     if (visible)
         QWindowSystemInterface::flushWindowSystemEvents();
@@ -216,15 +211,17 @@ void QEglFSWindow::requestActivateWindow()
     if (window()->type() != Qt::Desktop)
         screen()->moveToTop(this);
 
-    QWindowSystemInterface::handleWindowActivated(window());
-    QWindowSystemInterface::handleExposeEvent(window(), window()->geometry());
+    QWindow *wnd = window();
+    QWindowSystemInterface::handleWindowActivated(wnd);
+    QWindowSystemInterface::handleExposeEvent(wnd, QRect(QPoint(0, 0), wnd->geometry().size()));
 }
 
 void QEglFSWindow::raise()
 {
-    if (window()->type() != Qt::Desktop) {
+    QWindow *wnd = window();
+    if (wnd->type() != Qt::Desktop) {
         screen()->moveToTop(this);
-        QWindowSystemInterface::handleExposeEvent(window(), window()->geometry());
+        QWindowSystemInterface::handleExposeEvent(wnd, QRect(QPoint(0, 0), wnd->geometry().size()));
     }
 }
 
@@ -235,7 +232,8 @@ void QEglFSWindow::lower()
         int idx = windows.indexOf(this);
         if (idx > 0) {
             screen()->changeWindowIndex(this, idx - 1);
-            QWindowSystemInterface::handleExposeEvent(windows.last()->window(), windows.last()->geometry());
+            QWindowSystemInterface::handleExposeEvent(windows.last()->window(),
+                                                      QRect(QPoint(0, 0), windows.last()->geometry().size()));
         }
     }
 }
diff --git a/src/plugins/platforms/eglfs/qeglfswindow.h b/src/plugins/platforms/eglfs/qeglfswindow.h
index 4403e3c28e..5dfa35197f 100644
--- a/src/plugins/platforms/eglfs/qeglfswindow.h
+++ b/src/plugins/platforms/eglfs/qeglfswindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/ios/ios.pro b/src/plugins/platforms/ios/ios.pro
index ffc4ff9b12..6b67a42f69 100644
--- a/src/plugins/platforms/ios/ios.pro
+++ b/src/plugins/platforms/ios/ios.pro
@@ -23,7 +23,12 @@ OBJECTIVE_SOURCES = \
     qiostheme.mm \
     qiosglobal.mm \
     qiosservices.mm \
-    qiosclipboard.mm
+    quiview.mm \
+    qiosclipboard.mm \
+    quiaccessibilityelement.mm \
+    qiosplatformaccessibility.mm \
+    qiostextresponder.mm \
+    qiosmenu.mm \
 
 HEADERS = \
     qiosintegration.h \
@@ -40,7 +45,12 @@ HEADERS = \
     qiosglobal.h \
     qiosservices.h \
     quiview.h \
-    qiosclipboard.h
+    qiosclipboard.h \
+    quiaccessibilityelement.h \
+    qiosplatformaccessibility.h \
+    qiostextresponder.h \
+    qiosmenu.h \
 
 OTHER_FILES = \
-    quiview_textinput.mm
+    quiview_textinput.mm \
+    quiview_accessibility.mm
diff --git a/src/plugins/platforms/ios/qiosapplicationdelegate.h b/src/plugins/platforms/ios/qiosapplicationdelegate.h
index 617b740d6e..e89bb0d271 100644
--- a/src/plugins/platforms/ios/qiosapplicationdelegate.h
+++ b/src/plugins/platforms/ios/qiosapplicationdelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,7 +37,4 @@
 #import "qiosviewcontroller.h"
 
 @interface QIOSApplicationDelegate : UIResponder <UIApplicationDelegate>
-
-@property (strong, nonatomic) UIWindow *window;
-
 @end
diff --git a/src/plugins/platforms/ios/qiosapplicationdelegate.mm b/src/plugins/platforms/ios/qiosapplicationdelegate.mm
index 9cf1047a6b..ef9f924384 100644
--- a/src/plugins/platforms/ios/qiosapplicationdelegate.mm
+++ b/src/plugins/platforms/ios/qiosapplicationdelegate.mm
@@ -46,47 +46,12 @@
 #include "qiosviewcontroller.h"
 #include "qioswindow.h"
 
-#include <QtGui/private/qguiapplication_p.h>
 #include <qpa/qplatformintegration.h>
 
 #include <QtCore/QtCore>
 
 @implementation QIOSApplicationDelegate
 
-@synthesize window;
-
-- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
-{
-    Q_UNUSED(application);
-    Q_UNUSED(launchOptions);
-
-    self.window = [[[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]] autorelease];
-    self.window.rootViewController = [[[QIOSViewController alloc] init] autorelease];
-
-#if QT_IOS_DEPLOYMENT_TARGET_BELOW(__IPHONE_7_0)
-    QSysInfo::MacVersion iosVersion = QSysInfo::MacintoshVersion;
-
-    // We prefer to keep the root viewcontroller in fullscreen layout, so that
-    // we don't have to compensate for the viewcontroller position. This also
-    // gives us the same behavior on iOS 5/6 as on iOS 7, where full screen layout
-    // is the only way.
-    if (iosVersion < QSysInfo::MV_IOS_7_0)
-        self.window.rootViewController.wantsFullScreenLayout = YES;
-
-    // Use translucent statusbar by default on iOS6 iPhones (unless the user changed
-    // the default in the Info.plist), so that windows placed under the stausbar are
-    // still visible, just like on iOS7.
-    if (iosVersion >= QSysInfo::MV_IOS_6_0 && iosVersion < QSysInfo::MV_IOS_7_0
-        && [UIDevice currentDevice].userInterfaceIdiom == UIUserInterfaceIdiomPhone
-        && [UIApplication sharedApplication].statusBarStyle == UIStatusBarStyleDefault)
-        [[UIApplication sharedApplication] setStatusBarStyle:UIStatusBarStyleBlackTranslucent];
-#endif
-
-    self.window.hidden = NO;
-
-    return YES;
-}
-
 - (BOOL)application:(UIApplication *)application openURL:(NSURL *)url sourceApplication:(NSString *)sourceApplication annotation:(id)annotation
 {
     Q_UNUSED(application);
@@ -96,17 +61,13 @@
     if (!QGuiApplication::instance())
         return NO;
 
-    QIOSIntegration *iosIntegration = static_cast<QIOSIntegration *>(QGuiApplicationPrivate::platformIntegration());
+    QIOSIntegration *iosIntegration = QIOSIntegration::instance();
+    Q_ASSERT(iosIntegration);
+
     QIOSServices *iosServices = static_cast<QIOSServices *>(iosIntegration->services());
 
     return iosServices->handleUrl(QUrl::fromNSURL(url));
 }
 
-- (void)dealloc
-{
-    [window release];
-    [super dealloc];
-}
-
 @end
 
diff --git a/src/plugins/platforms/ios/qiosapplicationstate.h b/src/plugins/platforms/ios/qiosapplicationstate.h
index 57ea547e72..49620980db 100644
--- a/src/plugins/platforms/ios/qiosapplicationstate.h
+++ b/src/plugins/platforms/ios/qiosapplicationstate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/ios/qiosbackingstore.h b/src/plugins/platforms/ios/qiosbackingstore.h
index 4199530a01..eff7455247 100644
--- a/src/plugins/platforms/ios/qiosbackingstore.h
+++ b/src/plugins/platforms/ios/qiosbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/ios/qiosclipboard.h b/src/plugins/platforms/ios/qiosclipboard.h
index da4226a40d..7d758e3a56 100644
--- a/src/plugins/platforms/ios/qiosclipboard.h
+++ b/src/plugins/platforms/ios/qiosclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/ios/qiosclipboard.mm b/src/plugins/platforms/ios/qiosclipboard.mm
index 0a7b34a216..e18ad53b2c 100644
--- a/src/plugins/platforms/ios/qiosclipboard.mm
+++ b/src/plugins/platforms/ios/qiosclipboard.mm
@@ -205,6 +205,10 @@ void QIOSClipboard::setMimeData(QMimeData *mimeData, QClipboard::Mode mode)
     Q_ASSERT(supportsMode(mode));
 
     UIPasteboard *pb = [UIPasteboard pasteboardWithQClipboardMode:mode];
+    if (!mimeData) {
+        pb.items = [NSArray array];
+        return;
+    }
     NSMutableDictionary *pbItem = [NSMutableDictionary dictionaryWithCapacity:mimeData->formats().size()];
 
     foreach (const QString &mimeType, mimeData->formats()) {
diff --git a/src/plugins/platforms/ios/qioscontext.h b/src/plugins/platforms/ios/qioscontext.h
index 52357a5d58..9bc953cb6a 100644
--- a/src/plugins/platforms/ios/qioscontext.h
+++ b/src/plugins/platforms/ios/qioscontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/ios/qioscontext.mm b/src/plugins/platforms/ios/qioscontext.mm
index ddee52196a..0143b75828 100644
--- a/src/plugins/platforms/ios/qioscontext.mm
+++ b/src/plugins/platforms/ios/qioscontext.mm
@@ -47,19 +47,33 @@
 #include <QtGui/QOpenGLContext>
 
 #import <OpenGLES/EAGL.h>
+#import <OpenGLES/ES2/glext.h>
 #import <QuartzCore/CAEAGLLayer.h>
 
 QIOSContext::QIOSContext(QOpenGLContext *context)
     : QPlatformOpenGLContext()
     , m_sharedContext(static_cast<QIOSContext *>(context->shareHandle()))
-    , m_eaglContext([[EAGLContext alloc]
-        initWithAPI:kEAGLRenderingAPIOpenGLES2
-        sharegroup:m_sharedContext ? [m_sharedContext->m_eaglContext sharegroup] : nil])
     , m_format(context->format())
 {
     m_format.setRenderableType(QSurfaceFormat::OpenGLES);
-    m_format.setMajorVersion(2);
-    m_format.setMinorVersion(0);
+    m_eaglContext = [[EAGLContext alloc]
+            initWithAPI:EAGLRenderingAPI(m_format.majorVersion())
+            sharegroup:m_sharedContext ? [m_sharedContext->m_eaglContext sharegroup] : nil];
+
+    if (m_eaglContext != nil) {
+        EAGLContext *originalContext = [EAGLContext currentContext];
+        [EAGLContext setCurrentContext:m_eaglContext];
+        const GLubyte *s = glGetString(GL_VERSION);
+        if (s) {
+            QByteArray version = QByteArray(reinterpret_cast<const char *>(s));
+            int major, minor;
+            if (QPlatformOpenGLContext::parseOpenGLVersion(version, major, minor)) {
+                m_format.setMajorVersion(major);
+                m_format.setMinorVersion(minor);
+            }
+        }
+        [EAGLContext setCurrentContext:originalContext];
+    }
 
     // iOS internally double-buffers its rendering using copy instead of flipping,
     // so technically we could report that we are single-buffered so that clients
diff --git a/src/plugins/platforms/ios/qioseventdispatcher.h b/src/plugins/platforms/ios/qioseventdispatcher.h
index 5caa7f5d2d..fa35939c61 100644
--- a/src/plugins/platforms/ios/qioseventdispatcher.h
+++ b/src/plugins/platforms/ios/qioseventdispatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/ios/qiosglobal.h b/src/plugins/platforms/ios/qiosglobal.h
index 17184dc21d..c09987f9dc 100644
--- a/src/plugins/platforms/ios/qiosglobal.h
+++ b/src/plugins/platforms/ios/qiosglobal.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,4 +57,8 @@ int infoPlistValue(NSString* key, int defaultValue);
 
 QT_END_NAMESPACE
 
+@interface UIResponder (QtFirstResponder)
++(id)currentFirstResponder;
+@end
+
 #endif // QIOSGLOBAL_H
diff --git a/src/plugins/platforms/ios/qiosglobal.mm b/src/plugins/platforms/ios/qiosglobal.mm
index 2ce064582e..7ff4950599 100644
--- a/src/plugins/platforms/ios/qiosglobal.mm
+++ b/src/plugins/platforms/ios/qiosglobal.mm
@@ -141,5 +141,30 @@ int infoPlistValue(NSString* key, int defaultValue)
     return value ? [value intValue] : defaultValue;
 }
 
+// -------------------------------------------------------------------------
+
+@interface QtFirstResponderEvent : UIEvent
+@property (nonatomic, strong) id firstResponder;
+@end
+
+@implementation QtFirstResponderEvent
+@end
+
+@implementation UIResponder (QtFirstResponder)
+
++(id)currentFirstResponder
+{
+    QtFirstResponderEvent *event = [[[QtFirstResponderEvent alloc] init] autorelease];
+    [[UIApplication sharedApplication] sendAction:@selector(qt_findFirstResponder:event:) to:nil from:nil forEvent:event];
+    return event.firstResponder;
+}
+
+- (void)qt_findFirstResponder:(id)sender event:(QtFirstResponderEvent *)event
+{
+    Q_UNUSED(sender);
+    event.firstResponder = self;
+}
+@end
+
 QT_END_NAMESPACE
 
diff --git a/src/plugins/platforms/ios/qiosinputcontext.h b/src/plugins/platforms/ios/qiosinputcontext.h
index 13255ada56..8850bbf80e 100644
--- a/src/plugins/platforms/ios/qiosinputcontext.h
+++ b/src/plugins/platforms/ios/qiosinputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,13 +36,24 @@
 
 #include <UIKit/UIKit.h>
 
+#include <QtGui/qevent.h>
 #include <QtGui/qtransform.h>
 #include <qpa/qplatforminputcontext.h>
 
+const char kImePlatformDataInputView[] = "inputView";
+const char kImePlatformDataInputAccessoryView[] = "inputAccessoryView";
+
 QT_BEGIN_NAMESPACE
 
 @class QIOSKeyboardListener;
-@class QUIView;
+@class QIOSTextInputResponder;
+
+struct ImeState
+{
+    ImeState() : currentState(0) {}
+    Qt::InputMethodQueries update(Qt::InputMethodQueries properties);
+    QInputMethodQueryEvent currentState;
+};
 
 class QIOSInputContext : public QPlatformInputContext
 {
@@ -59,8 +62,11 @@ public:
     ~QIOSInputContext();
 
     QRectF keyboardRect() const;
+
     void showInputPanel();
     void hideInputPanel();
+    void hideVirtualKeyboard();
+
     bool isInputPanelVisible() const;
     void setFocusObject(QObject *object);
 
@@ -73,10 +79,12 @@ public:
     void reset();
     void commit();
 
+    const ImeState &imeState() { return m_imeState; };
+
 private:
     QIOSKeyboardListener *m_keyboardListener;
-    QUIView *m_focusView;
-    bool m_hasPendingHideRequest;
+    QIOSTextInputResponder *m_textResponder;
+    ImeState m_imeState;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/ios/qiosinputcontext.mm b/src/plugins/platforms/ios/qiosinputcontext.mm
index d109d53168..13e91889a2 100644
--- a/src/plugins/platforms/ios/qiosinputcontext.mm
+++ b/src/plugins/platforms/ios/qiosinputcontext.mm
@@ -44,11 +44,19 @@
 #import <UIKit/UIGestureRecognizerSubclass.h>
 
 #include "qiosglobal.h"
+#include "qiostextresponder.h"
 #include "qioswindow.h"
 #include "quiview.h"
+
 #include <QGuiApplication>
 #include <QtGui/private/qwindow_p.h>
 
+static QUIView *focusView()
+{
+    return qApp->focusWindow() ?
+        reinterpret_cast<QUIView *>(qApp->focusWindow()->winId()) : 0;
+}
+
 @interface QIOSKeyboardListener : UIGestureRecognizer {
 @public
     QIOSInputContext *m_context;
@@ -57,7 +65,7 @@
     BOOL m_touchPressWhileKeyboardVisible;
     BOOL m_keyboardHiddenByGesture;
     QRectF m_keyboardRect;
-    QRectF m_keyboardEndRect;
+    CGRect m_keyboardEndRect;
     NSTimeInterval m_duration;
     UIViewAnimationCurve m_curve;
     UIViewController *m_viewController;
@@ -131,20 +139,6 @@
     [super dealloc];
 }
 
-- (QRectF) getKeyboardRect:(NSNotification *)notification
-{
-    // For Qt applications we rotate the keyboard rect to align with the screen
-    // orientation (which is the interface orientation of the root view controller).
-    // For hybrid apps we follow native behavior, and return the rect unmodified:
-    CGRect keyboardFrame = [[[notification userInfo] objectForKey:UIKeyboardFrameEndUserInfoKey] CGRectValue];
-    if (isQtApplication()) {
-        UIView *view = m_viewController.view;
-        return fromCGRect(CGRectOffset([view convertRect:keyboardFrame fromView:view.window], 0, -view.bounds.origin.y));
-    } else {
-        return fromCGRect(keyboardFrame);
-    }
-}
-
 - (void) keyboardDidChangeFrame:(NSNotification *)notification
 {
     Q_UNUSED(notification);
@@ -158,26 +152,22 @@
 
 - (void) keyboardWillShow:(NSNotification *)notification
 {
-    if ([QUIView inUpdateKeyboardLayout])
-        return;
     // Note that UIKeyboardWillShowNotification is only sendt when the keyboard is docked.
     m_keyboardVisibleAndDocked = YES;
-    m_keyboardEndRect = [self getKeyboardRect:notification];
+    m_keyboardEndRect = [[[notification userInfo] objectForKey:UIKeyboardFrameEndUserInfoKey] CGRectValue];
     self.enabled = YES;
     if (!m_duration) {
         m_duration = [[notification.userInfo objectForKey:UIKeyboardAnimationDurationUserInfoKey] doubleValue];
-        m_curve = UIViewAnimationCurve([[notification.userInfo objectForKey:UIKeyboardAnimationCurveUserInfoKey] integerValue] << 16);
+        m_curve = UIViewAnimationCurve([[notification.userInfo objectForKey:UIKeyboardAnimationCurveUserInfoKey] integerValue]);
     }
     m_context->scrollToCursor();
 }
 
 - (void) keyboardWillHide:(NSNotification *)notification
 {
-    if ([QUIView inUpdateKeyboardLayout])
-        return;
     // Note that UIKeyboardWillHideNotification is also sendt when the keyboard is undocked.
     m_keyboardVisibleAndDocked = NO;
-    m_keyboardEndRect = [self getKeyboardRect:notification];
+    m_keyboardEndRect = [[[notification userInfo] objectForKey:UIKeyboardFrameEndUserInfoKey] CGRectValue];
     if (!m_keyboardHiddenByGesture) {
         // Only disable the gesture if the hiding of the keyboard was not caused by it.
         // Otherwise we need to await the final touchEnd callback for doing some clean-up.
@@ -188,14 +178,23 @@
 
 - (void) handleKeyboardRectChanged
 {
-    QRectF rect = m_keyboardEndRect;
-    rect.moveTop(rect.y() + m_viewController.view.bounds.origin.y);
-    if (m_keyboardRect != rect) {
-        m_keyboardRect = rect;
+    // QInputmethod::keyboardRectangle() is documented to be in window coordinates.
+    // If there is no focus window, we return an empty rectangle
+    UIView *view = focusView();
+    QRectF convertedRect = fromCGRect([view convertRect:m_keyboardEndRect fromView:nil]);
+
+    // Set height to zero if keyboard is hidden. Otherwise the rect will not change
+    // when the keyboard hides on a scrolled screen (since the keyboard will already
+    // be at the bottom of the 'screen' in that case)
+    if (!m_keyboardVisibleAndDocked)
+        convertedRect.setHeight(0);
+
+    if (convertedRect != m_keyboardRect) {
+        m_keyboardRect = convertedRect;
         m_context->emitKeyboardRectChanged();
     }
 
-    BOOL visible = m_keyboardEndRect.intersects(fromCGRect([UIScreen mainScreen].bounds));
+    BOOL visible = CGRectIntersectsRect(m_keyboardEndRect, [UIScreen mainScreen].bounds);
     if (m_keyboardVisible != visible) {
         m_keyboardVisible = visible;
         m_context->emitInputPanelVisibleChanged();
@@ -204,10 +203,10 @@
 
 - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event
 {
-    QPointF p = fromCGPoint([[touches anyObject] locationInView:m_viewController.view]);
-    if (m_keyboardRect.contains(p)) {
+    CGPoint p = [[touches anyObject] locationInView:m_viewController.view.window];
+    if (CGRectContainsPoint(m_keyboardEndRect, p)) {
         m_keyboardHiddenByGesture = YES;
-        m_context->hideInputPanel();
+        m_context->hideVirtualKeyboard();
     }
 
     [super touchesMoved:touches withEvent:event];
@@ -253,11 +252,37 @@
 
 @end
 
+// -------------------------------------------------------------------------
+
+Qt::InputMethodQueries ImeState::update(Qt::InputMethodQueries properties)
+{
+    if (!properties)
+        return 0;
+
+    QInputMethodQueryEvent newState(properties);
+
+    if (qApp && qApp->focusObject())
+        QCoreApplication::sendEvent(qApp->focusObject(), &newState);
+
+    Qt::InputMethodQueries updatedProperties;
+    for (uint i = 0; i < (sizeof(Qt::ImQueryAll) * CHAR_BIT); ++i) {
+        if (Qt::InputMethodQuery property = Qt::InputMethodQuery(int(properties & (1 << i)))) {
+            if (newState.value(property) != currentState.value(property)) {
+                updatedProperties |= property;
+                currentState.setValue(property, newState.value(property));
+            }
+        }
+    }
+
+    return updatedProperties;
+}
+
+// -------------------------------------------------------------------------
+
 QIOSInputContext::QIOSInputContext()
     : QPlatformInputContext()
     , m_keyboardListener([[QIOSKeyboardListener alloc] initWithQIOSInputContext:this])
-    , m_focusView(0)
-    , m_hasPendingHideRequest(false)
+    , m_textResponder(0)
 {
     if (isQtApplication())
         connect(qGuiApp->inputMethod(), &QInputMethod::cursorRectangleChanged, this, &QIOSInputContext::cursorRectangleChanged);
@@ -267,7 +292,7 @@ QIOSInputContext::QIOSInputContext()
 QIOSInputContext::~QIOSInputContext()
 {
     [m_keyboardListener release];
-    [m_focusView release];
+    [m_textResponder release];
 }
 
 QRectF QIOSInputContext::keyboardRect() const
@@ -277,61 +302,22 @@ QRectF QIOSInputContext::keyboardRect() const
 
 void QIOSInputContext::showInputPanel()
 {
-    if (m_keyboardListener->m_keyboardHiddenByGesture) {
-        // We refuse to re-show the keyboard until the touch
-        // sequence that triggered the gesture has ended.
-        return;
-    }
-
-    // Documentation tells that one should call (and recall, if necessary) becomeFirstResponder/resignFirstResponder
-    // to show/hide the keyboard. This is slightly inconvenient, since there exist no API to get the current first
-    // responder. Rather than searching for it from the top, we let the active QIOSWindow tell us which view to use.
-    // Note that Qt will forward keyevents to whichever QObject that needs it, regardless of which UIView the input
-    // actually came from. So in this respect, we're undermining iOS' responder chain.
-    m_hasPendingHideRequest = false;
-    [m_focusView becomeFirstResponder];
+    // No-op, keyboard controlled fully by platform based on focus
 }
 
 void QIOSInputContext::hideInputPanel()
 {
-    // Delay hiding the keyboard for cases where the user is transferring focus between
-    // 'line edits'. In that case the 'line edit' that lost focus will close the input
-    // panel, just to see that the new 'line edit' will open it again:
-    m_hasPendingHideRequest = true;
-    dispatch_async(dispatch_get_main_queue(), ^{
-        if (m_hasPendingHideRequest)
-            [m_focusView resignFirstResponder];
-    });
+    // No-op, keyboard controlled fully by platform based on focus
 }
 
-bool QIOSInputContext::isInputPanelVisible() const
+void QIOSInputContext::hideVirtualKeyboard()
 {
-    return m_keyboardListener->m_keyboardVisible;
-}
-
-void QIOSInputContext::setFocusObject(QObject *focusObject)
-{
-    if (!focusObject || !m_focusView || !m_focusView.isFirstResponder) {
-        scroll(0);
-        return;
-    }
-
-    reset();
-
-    if (m_keyboardListener->m_keyboardVisibleAndDocked)
-        scrollToCursor();
+    static_cast<QWindowPrivate *>(QObjectPrivate::get(qApp->focusWindow()))->clearFocusObject();
 }
 
-void QIOSInputContext::focusWindowChanged(QWindow *focusWindow)
+bool QIOSInputContext::isInputPanelVisible() const
 {
-    QUIView *view = focusWindow ? reinterpret_cast<QUIView *>(focusWindow->handle()->winId()) : 0;
-    if ([m_focusView isFirstResponder])
-        [view becomeFirstResponder];
-    [m_focusView release];
-    m_focusView = [view retain];
-
-    if (view.window != m_keyboardListener->m_viewController.view)
-        scroll(0);
+    return m_keyboardListener->m_keyboardVisible;
 }
 
 void QIOSInputContext::cursorRectangleChanged()
@@ -353,7 +339,7 @@ void QIOSInputContext::cursorRectangleChanged()
 
 void QIOSInputContext::scrollToCursor()
 {
-    if (!isQtApplication() || !m_focusView)
+    if (!isQtApplication())
         return;
 
     if (m_keyboardListener->m_touchPressWhileKeyboardVisible) {
@@ -364,13 +350,14 @@ void QIOSInputContext::scrollToCursor()
     }
 
     UIView *view = m_keyboardListener->m_viewController.view;
-    if (view.window != m_focusView.window)
+    if (view.window != focusView().window)
         return;
 
     const int margin = 20;
     QRectF translatedCursorPos = qApp->inputMethod()->cursorRectangle();
-    translatedCursorPos.translate(m_focusView.qwindow->geometry().topLeft());
-    qreal keyboardY = m_keyboardListener->m_keyboardEndRect.y();
+    translatedCursorPos.translate(focusView().qwindow->geometry().topLeft());
+
+    qreal keyboardY = [view convertRect:m_keyboardListener->m_keyboardEndRect fromView:nil].origin.y;
     int statusBarY = qGuiApp->primaryScreen()->availableGeometry().y();
 
     scroll((translatedCursorPos.bottomLeft().y() < keyboardY - margin) ? 0
@@ -379,18 +366,40 @@ void QIOSInputContext::scrollToCursor()
 
 void QIOSInputContext::scroll(int y)
 {
-    // Scroll the view the same way a UIScrollView
-    // works: by changing bounds.origin:
-    UIView *view = m_keyboardListener->m_viewController.view;
-    if (y == view.bounds.origin.y)
+    UIView *rootView = m_keyboardListener->m_viewController.view;
+
+    CATransform3D translationTransform = CATransform3DMakeTranslation(0.0, -y, 0.0);
+    if (CATransform3DEqualToTransform(translationTransform, rootView.layer.sublayerTransform))
         return;
 
-    CGRect newBounds = view.bounds;
-    newBounds.origin.y = y;
     QPointer<QIOSInputContext> self = this;
     [UIView animateWithDuration:m_keyboardListener->m_duration delay:0
-        options:m_keyboardListener->m_curve | UIViewAnimationOptionBeginFromCurrentState
-        animations:^{ view.bounds = newBounds; }
+        options:(m_keyboardListener->m_curve << 16) | UIViewAnimationOptionBeginFromCurrentState
+        animations:^{
+            // The sublayerTransform property of CALayer is not implicitly animated for a
+            // layer-backed view, even inside a UIView animation block, so we need to set up
+            // an explicit CoreAnimation animation. Since there is no predefined media timing
+            // function that matches the custom keyboard animation curve we cheat by asking
+            // the view for an animation of another property, which will give us an animation
+            // that matches the parameters we passed to [UIView animateWithDuration] above.
+            // The reason we ask for the animation of 'backgroundColor' is that it's a simple
+            // property that will not return a compound animation, like eg. bounds will.
+            NSObject *action = (NSObject*)[rootView actionForLayer:rootView.layer forKey:@"backgroundColor"];
+
+            CABasicAnimation *animation;
+            if ([action isKindOfClass:[CABasicAnimation class]]) {
+                animation = static_cast<CABasicAnimation*>(action);
+                animation.keyPath = @"sublayerTransform"; // Instead of backgroundColor
+            } else {
+                animation = [CABasicAnimation animationWithKeyPath:@"sublayerTransform"];
+            }
+
+            CATransform3D currentSublayerTransform = static_cast<CALayer *>([rootView.layer presentationLayer]).sublayerTransform;
+            animation.fromValue = [NSValue valueWithCATransform3D:currentSublayerTransform];
+            animation.toValue = [NSValue valueWithCATransform3D:translationTransform];
+            [rootView.layer addAnimation:animation forKey:@"AnimateSubLayerTransform"];
+            rootView.layer.sublayerTransform = translationTransform;
+        }
         completion:^(BOOL){
             if (self)
                 [m_keyboardListener handleKeyboardRectChanged];
@@ -398,18 +407,85 @@ void QIOSInputContext::scroll(int y)
     ];
 }
 
-void QIOSInputContext::update(Qt::InputMethodQueries query)
+// -------------------------------------------------------------------------
+
+void QIOSInputContext::setFocusObject(QObject *focusObject)
+{
+    Q_UNUSED(focusObject);
+
+    reset();
+
+    if (m_keyboardListener->m_keyboardVisibleAndDocked)
+        scrollToCursor();
+}
+
+void QIOSInputContext::focusWindowChanged(QWindow *focusWindow)
 {
-    [m_focusView updateInputMethodWithQuery:query];
+    Q_UNUSED(focusWindow);
+
+    reset();
+
+    [m_keyboardListener handleKeyboardRectChanged];
+    if (m_keyboardListener->m_keyboardVisibleAndDocked)
+        scrollToCursor();
 }
 
+/*!
+    Called by the input item to inform the platform input methods when there has been
+    state changes in editor's input method query attributes. When calling the function
+    \a queries parameter has to be used to tell what has changes, which input method
+    can use to make queries for attributes it's interested with QInputMethodQueryEvent.
+*/
+void QIOSInputContext::update(Qt::InputMethodQueries updatedProperties)
+{
+    // Mask for properties that we are interested in and see if any of them changed
+    updatedProperties &= (Qt::ImEnabled | Qt::ImHints | Qt::ImQueryInput | Qt::ImPlatformData);
+
+    Qt::InputMethodQueries changedProperties = m_imeState.update(updatedProperties);
+    if (changedProperties & (Qt::ImEnabled | Qt::ImHints | Qt::ImPlatformData)) {
+        // Changes to enablement or hints require virtual keyboard reconfigure
+        [m_textResponder release];
+        m_textResponder = [[QIOSTextInputResponder alloc] initWithInputContext:this];
+        [m_textResponder reloadInputViews];
+    } else {
+        [m_textResponder notifyInputDelegate:changedProperties];
+    }
+}
+
+/*!
+    Called by the input item to reset the input method state.
+*/
 void QIOSInputContext::reset()
 {
-    [m_focusView reset];
+    update(Qt::ImQueryAll);
+
+    [m_textResponder setMarkedText:@"" selectedRange:NSMakeRange(0, 0)];
+    [m_textResponder notifyInputDelegate:Qt::ImQueryInput];
 }
 
+/*!
+    Commits the word user is currently composing to the editor. The function is
+    mostly needed by the input methods with text prediction features and by the
+    methods where the script used for typing characters is different from the
+    script that actually gets appended to the editor. Any kind of action that
+    interrupts the text composing needs to flush the composing state by calling the
+    commit() function, for example when the cursor is moved elsewhere.
+*/
 void QIOSInputContext::commit()
 {
-    [m_focusView commit];
+    [m_textResponder unmarkText];
+    [m_textResponder notifyInputDelegate:Qt::ImSurroundingText];
 }
 
+// -------------------------------------------------------------------------
+
+@interface QUIView (InputMethods)
+- (void)reloadInputViews;
+@end
+
+@implementation QUIView (InputMethods)
+- (void)reloadInputViews
+{
+    qApp->inputMethod()->reset();
+}
+@end
diff --git a/src/plugins/platforms/ios/qiosintegration.h b/src/plugins/platforms/ios/qiosintegration.h
index 956c112399..85338b1c4d 100644
--- a/src/plugins/platforms/ios/qiosintegration.h
+++ b/src/plugins/platforms/ios/qiosintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -82,14 +74,20 @@ public:
     void *nativeResourceForWindow(const QByteArray &resource, QWindow *window);
 
     QTouchDevice *touchDevice();
+    QPlatformAccessibility *accessibility() const Q_DECL_OVERRIDE;
+
+    void addScreen(QPlatformScreen *screen) { screenAdded(screen); }
+
+    static QIOSIntegration *instance();
+
 private:
     QPlatformFontDatabase *m_fontDatabase;
     QPlatformClipboard *m_clipboard;
     QPlatformInputContext *m_inputContext;
-    QPlatformScreen *m_screen;
     QTouchDevice *m_touchDevice;
     QIOSApplicationState m_applicationState;
     QIOSServices *m_platformServices;
+    mutable QPlatformAccessibility *m_accessibility;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/ios/qiosintegration.mm b/src/plugins/platforms/ios/qiosintegration.mm
index 0fe7adff9f..9a722ead37 100644
--- a/src/plugins/platforms/ios/qiosintegration.mm
+++ b/src/plugins/platforms/ios/qiosintegration.mm
@@ -45,12 +45,15 @@
 #include "qioswindow.h"
 #include "qiosbackingstore.h"
 #include "qiosscreen.h"
+#include "qiosplatformaccessibility.h"
 #include "qioscontext.h"
 #include "qiosclipboard.h"
 #include "qiosinputcontext.h"
 #include "qiostheme.h"
 #include "qiosservices.h"
 
+#include <QtGui/private/qguiapplication_p.h>
+
 #include <qpa/qplatformoffscreensurface.h>
 
 #include <QtPlatformSupport/private/qcoretextfontdatabase_p.h>
@@ -61,12 +64,17 @@
 
 QT_BEGIN_NAMESPACE
 
+QIOSIntegration *QIOSIntegration::instance()
+{
+    return static_cast<QIOSIntegration *>(QGuiApplicationPrivate::platformIntegration());
+}
+
 QIOSIntegration::QIOSIntegration()
     : m_fontDatabase(new QCoreTextFontDatabase)
     , m_clipboard(new QIOSClipboard)
-    , m_inputContext(new QIOSInputContext)
-    , m_screen(new QIOSScreen(QIOSScreen::MainScreen))
+    , m_inputContext(0)
     , m_platformServices(new QIOSServices)
+    , m_accessibility(0)
 {
     if (![UIApplication sharedApplication]) {
         qWarning()
@@ -80,7 +88,11 @@ QIOSIntegration::QIOSIntegration()
     // Set current directory to app bundle folder
     QDir::setCurrent(QString::fromUtf8([[[NSBundle mainBundle] bundlePath] UTF8String]));
 
-    screenAdded(m_screen);
+    for (UIScreen *screen in [UIScreen screens])
+        addScreen(new QIOSScreen(screen));
+
+    // Depends on a primary screen being present
+    m_inputContext = new QIOSInputContext;
 
     m_touchDevice = new QTouchDevice;
     m_touchDevice->setType(QTouchDevice::TouchScreen);
@@ -101,11 +113,14 @@ QIOSIntegration::~QIOSIntegration()
     delete m_inputContext;
     m_inputContext = 0;
 
-    delete m_screen;
-    m_screen = 0;
+    foreach (QScreen *screen, QGuiApplication::screens())
+        delete screen->handle();
 
     delete m_platformServices;
     m_platformServices = 0;
+
+    delete m_accessibility;
+    m_accessibility = 0;
 }
 
 bool QIOSIntegration::hasCapability(Capability cap) const
@@ -229,4 +244,11 @@ QTouchDevice *QIOSIntegration::touchDevice()
     return m_touchDevice;
 }
 
+QPlatformAccessibility *QIOSIntegration::accessibility() const
+{
+    if (!m_accessibility)
+        m_accessibility = new QIOSPlatformAccessibility;
+    return m_accessibility;
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/ios/qiosmenu.h b/src/plugins/platforms/ios/qiosmenu.h
new file mode 100644
index 0000000000..16e1ee5d1f
--- /dev/null
+++ b/src/plugins/platforms/ios/qiosmenu.h
@@ -0,0 +1,148 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QIOSMENU_H
+#define QIOSMENU_H
+
+#import <UIKit/UIKit.h>
+
+#include <QtCore/QtCore>
+#include <qpa/qplatformmenu.h>
+
+#import "quiview.h"
+
+class QIOSMenu;
+@class QUIMenuController;
+@class QUIPickerView;
+
+class QIOSMenuItem : public QPlatformMenuItem
+{
+public:
+    QIOSMenuItem();
+
+    void setTag(quintptr tag) Q_DECL_OVERRIDE;
+    quintptr tag()const Q_DECL_OVERRIDE;
+
+    void setText(const QString &text) Q_DECL_OVERRIDE;
+    void setIcon(const QIcon &) Q_DECL_OVERRIDE {}
+    void setMenu(QPlatformMenu *) Q_DECL_OVERRIDE;
+    void setVisible(bool isVisible) Q_DECL_OVERRIDE;
+    void setIsSeparator(bool) Q_DECL_OVERRIDE;
+    void setFont(const QFont &) Q_DECL_OVERRIDE {}
+    void setRole(MenuRole role) Q_DECL_OVERRIDE;
+    void setCheckable(bool) Q_DECL_OVERRIDE {}
+    void setChecked(bool) Q_DECL_OVERRIDE {}
+    void setShortcut(const QKeySequence&) Q_DECL_OVERRIDE {}
+    void setEnabled(bool enabled) Q_DECL_OVERRIDE;
+    void setIconSize(int) Q_DECL_OVERRIDE {}
+
+    quintptr m_tag;
+    bool m_visible;
+    QString m_text;
+    MenuRole m_role;
+    bool m_enabled;
+    bool m_separator;
+    QIOSMenu *m_menu;
+
+private:
+    QString removeMnemonics(const QString &original);
+};
+
+typedef QList<QIOSMenuItem *> QIOSMenuItemList;
+
+class QIOSMenu : public QPlatformMenu
+{
+public:
+    QIOSMenu();
+    ~QIOSMenu();
+
+    void insertMenuItem(QPlatformMenuItem *menuItem, QPlatformMenuItem *before) Q_DECL_OVERRIDE;
+    void removeMenuItem(QPlatformMenuItem *menuItem) Q_DECL_OVERRIDE;
+    void syncMenuItem(QPlatformMenuItem *) Q_DECL_OVERRIDE {}
+    void syncSeparatorsCollapsible(bool) Q_DECL_OVERRIDE {}
+
+    void setTag(quintptr tag) Q_DECL_OVERRIDE;
+    quintptr tag()const Q_DECL_OVERRIDE;
+
+    void setText(const QString &) Q_DECL_OVERRIDE;
+    void setIcon(const QIcon &) Q_DECL_OVERRIDE {}
+    void setEnabled(bool enabled) Q_DECL_OVERRIDE;
+    void setVisible(bool visible) Q_DECL_OVERRIDE;
+    void setMenuType(MenuType type) Q_DECL_OVERRIDE;
+
+    void showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item) Q_DECL_OVERRIDE;
+    void dismiss() Q_DECL_OVERRIDE;
+
+    QPlatformMenuItem *menuItemAt(int position) const Q_DECL_OVERRIDE;
+    QPlatformMenuItem *menuItemForTag(quintptr tag) const Q_DECL_OVERRIDE;
+
+    void handleItemSelected(QIOSMenuItem *menuItem);
+
+    static QIOSMenu *currentMenu() { return m_currentMenu; }
+    static id menuActionTarget() { return m_currentMenu ? m_currentMenu->m_menuController : 0; }
+
+protected:
+    bool eventFilter(QObject *obj, QEvent *event);
+
+private:
+    quintptr m_tag;
+    bool m_enabled;
+    bool m_visible;
+    QString m_text;
+    MenuType m_menuType;
+    MenuType m_effectiveMenuType;
+    QPointer<QWindow> m_parentWindow;
+    QRect m_targetRect;
+    const QIOSMenuItem *m_targetItem;
+    QUIMenuController *m_menuController;
+    QUIPickerView *m_pickerView;
+    QIOSMenuItemList m_menuItems;
+
+    static QIOSMenu *m_currentMenu;
+
+    void updateVisibility();
+    void toggleShowUsingUIMenuController(bool show);
+    void toggleShowUsingUIPickerView(bool show);
+    QIOSMenuItemList visibleMenuItems() const;
+    void repositionMenu();
+};
+
+#endif // QIOSMENU_H
diff --git a/src/plugins/platforms/ios/qiosmenu.mm b/src/plugins/platforms/ios/qiosmenu.mm
new file mode 100644
index 0000000000..c247c16514
--- /dev/null
+++ b/src/plugins/platforms/ios/qiosmenu.mm
@@ -0,0 +1,528 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <qglobal.h>
+#include <qguiapplication.h>
+
+#include "qiosglobal.h"
+#include "qiosmenu.h"
+#include "qioswindow.h"
+#include "qiosinputcontext.h"
+#include "qiosintegration.h"
+#include "qiostextresponder.h"
+
+// m_currentMenu points to the currently visible menu.
+// Only one menu will be visible at a time, and if a second menu
+// is shown on top of a first, the first one will be told to hide.
+QIOSMenu *QIOSMenu::m_currentMenu = 0;
+
+// -------------------------------------------------------------------------
+
+static NSString *const kSelectorPrefix = @"_qtMenuItem_";
+
+@interface QUIMenuController : UIResponder {
+    QIOSMenuItemList m_visibleMenuItems;
+}
+@end
+
+@implementation QUIMenuController
+
+- (id)initWithVisibleMenuItems:(const QIOSMenuItemList &)visibleMenuItems
+{
+    if (self = [super init]) {
+        m_visibleMenuItems = visibleMenuItems;
+        NSMutableArray *menuItemArray = [NSMutableArray arrayWithCapacity:m_visibleMenuItems.size()];
+        // Create an array of UIMenuItems, one for each visible QIOSMenuItem. Each
+        // UIMenuItem needs a callback assigned, so we assign one of the placeholder methods
+        // added to UIWindow (QIOSMenuActionTargets) below. Each method knows its own index, which
+        // corresponds to the index of the corresponding QIOSMenuItem in m_visibleMenuItems. When
+        // triggered, menuItemActionCallback will end up being called.
+        for (int i = 0; i < m_visibleMenuItems.count(); ++i) {
+            QIOSMenuItem *item = m_visibleMenuItems.at(i);
+            SEL sel = NSSelectorFromString([NSString stringWithFormat:@"%@%i:", kSelectorPrefix, i]);
+            [menuItemArray addObject:[[[UIMenuItem alloc] initWithTitle:item->m_text.toNSString() action:sel] autorelease]];
+        }
+        [UIMenuController sharedMenuController].menuItems = menuItemArray;
+    }
+
+    return self;
+}
+
+- (id)targetForAction:(SEL)action withSender:(id)sender
+{
+    BOOL containsPrefix = ([NSStringFromSelector(action) rangeOfString:kSelectorPrefix].location != NSNotFound);
+    return (containsPrefix && [sender isKindOfClass:[UIMenuController class]]) ? self : 0;
+}
+
+- (NSMethodSignature *)methodSignatureForSelector:(SEL)selector
+{
+    Q_UNUSED(selector);
+    // Just return a dummy signature that NSObject can create an NSInvocation from.
+    // We end up only checking selector in forwardInvocation anyway.
+    return [super methodSignatureForSelector:@selector(methodSignatureForSelector:)];
+}
+
+- (void)forwardInvocation:(NSInvocation *)invocation
+{
+    // Since none of the menu item selector methods actually exist, this function
+    // will end up being called as a final resort. We can then handle the action.
+    NSString *selector = NSStringFromSelector(invocation.selector);
+    NSRange range = NSMakeRange(kSelectorPrefix.length, selector.length - kSelectorPrefix.length - 1);
+    NSInteger selectedIndex = [[selector substringWithRange:range] integerValue];
+    QIOSMenu::currentMenu()->handleItemSelected(m_visibleMenuItems.at(selectedIndex));
+}
+
+@end
+
+// -------------------------------------------------------------------------
+
+@interface QUIPickerView : UIPickerView <UIPickerViewDelegate, UIPickerViewDataSource> {
+    QIOSMenuItemList m_visibleMenuItems;
+    QPointer<QObject> m_focusObjectWithPickerView;
+    NSInteger m_selectedRow;
+}
+
+@property(retain) UIToolbar *toolbar;
+
+@end
+
+@implementation QUIPickerView
+
+- (id)initWithVisibleMenuItems:(const QIOSMenuItemList &)visibleMenuItems selectItem:(const QIOSMenuItem *)selectItem
+{
+    if (self = [super init]) {
+        self.autoresizingMask = UIViewAutoresizingFlexibleWidth;
+        m_visibleMenuItems = visibleMenuItems;
+        m_selectedRow = visibleMenuItems.indexOf(const_cast<QIOSMenuItem *>(selectItem));
+        if (m_selectedRow == -1)
+            m_selectedRow = 0;
+
+        self.toolbar = [[[UIToolbar alloc] initWithFrame:CGRectMake(0, 0, 100, 44)] autorelease];
+        self.toolbar.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight;
+
+        UIBarButtonItem *doneButton = [[[UIBarButtonItem alloc]
+                initWithBarButtonSystemItem:UIBarButtonSystemItemDone
+                target:self action:@selector(closeMenu)] autorelease];
+        UIBarButtonItem *spaceButton = [[[UIBarButtonItem alloc]
+                initWithBarButtonSystemItem:UIBarButtonSystemItemFlexibleSpace
+                target:self action:@selector(closeMenu)] autorelease];
+        UIBarButtonItem *cancelButton = [[[UIBarButtonItem alloc]
+                initWithBarButtonSystemItem:UIBarButtonSystemItemCancel
+                target:self action:@selector(cancelMenu)] autorelease];
+        [self.toolbar setItems:[NSArray arrayWithObjects:doneButton, spaceButton, cancelButton, nil]];
+
+        [self setDelegate:self];
+        [self setDataSource:self];
+        [self selectRow:m_selectedRow inComponent:0 animated:false];
+    }
+
+    return self;
+}
+
+-(void)dealloc
+{
+    self.toolbar = 0;
+    [super dealloc];
+}
+
+- (NSString *)pickerView:(UIPickerView *)pickerView titleForRow:(NSInteger)row forComponent:(NSInteger)component
+{
+    Q_UNUSED(pickerView);
+    Q_UNUSED(component);
+    return m_visibleMenuItems.at(row)->m_text.toNSString();
+}
+
+- (NSInteger)numberOfComponentsInPickerView:(UIPickerView *)pickerView
+{
+    Q_UNUSED(pickerView);
+    return 1;
+}
+
+- (NSInteger)pickerView:(UIPickerView *)pickerView numberOfRowsInComponent:(NSInteger)component
+{
+    Q_UNUSED(pickerView);
+    Q_UNUSED(component);
+    return m_visibleMenuItems.length();
+}
+
+- (void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component
+{
+    Q_UNUSED(pickerView);
+    Q_UNUSED(component);
+    m_selectedRow = row;
+}
+
+- (void)closeMenu
+{
+    if (!m_visibleMenuItems.isEmpty())
+        QIOSMenu::currentMenu()->handleItemSelected(m_visibleMenuItems.at(m_selectedRow));
+    else
+        QIOSMenu::currentMenu()->dismiss();
+}
+
+- (void)cancelMenu
+{
+    QIOSMenu::currentMenu()->dismiss();
+}
+
+@end
+
+// -------------------------------------------------------------------------
+
+QIOSMenuItem::QIOSMenuItem()
+    : QPlatformMenuItem()
+    , m_tag(0)
+    , m_visible(true)
+    , m_text(QString())
+    , m_role(MenuRole(0))
+    , m_enabled(true)
+    , m_separator(false)
+    , m_menu(0)
+{
+}
+
+void QIOSMenuItem::setTag(quintptr tag)
+{
+    m_tag = tag;
+}
+
+quintptr QIOSMenuItem::tag() const
+{
+    return m_tag;
+}
+
+void QIOSMenuItem::setText(const QString &text)
+{
+    m_text = removeMnemonics(text);
+}
+
+void QIOSMenuItem::setMenu(QPlatformMenu *menu)
+{
+   m_menu = static_cast<QIOSMenu *>(menu);
+}
+
+void QIOSMenuItem::setVisible(bool isVisible)
+{
+    m_visible = isVisible;
+}
+
+void QIOSMenuItem::setIsSeparator(bool isSeparator)
+{
+   m_separator = isSeparator;
+}
+
+void QIOSMenuItem::setRole(QPlatformMenuItem::MenuRole role)
+{
+    m_role = role;
+}
+
+void QIOSMenuItem::setEnabled(bool enabled)
+{
+    m_enabled = enabled;
+}
+
+QString QIOSMenuItem::removeMnemonics(const QString &original)
+{
+    // Copied from qcocoahelpers
+    QString returnText(original.size(), 0);
+    int finalDest = 0;
+    int currPos = 0;
+    int l = original.length();
+    while (l) {
+        if (original.at(currPos) == QLatin1Char('&')
+            && (l == 1 || original.at(currPos + 1) != QLatin1Char('&'))) {
+            ++currPos;
+            --l;
+            if (l == 0)
+                break;
+        } else if (original.at(currPos) == QLatin1Char('(') && l >= 4 &&
+                   original.at(currPos + 1) == QLatin1Char('&') &&
+                   original.at(currPos + 2) != QLatin1Char('&') &&
+                   original.at(currPos + 3) == QLatin1Char(')')) {
+            /* remove mnemonics its format is "\s*(&X)" */
+            int n = 0;
+            while (finalDest > n && returnText.at(finalDest - n - 1).isSpace())
+                ++n;
+            finalDest -= n;
+            currPos += 4;
+            l -= 4;
+            continue;
+        }
+        returnText[finalDest] = original.at(currPos);
+        ++currPos;
+        ++finalDest;
+        --l;
+    }
+    returnText.truncate(finalDest);
+    return returnText;
+}
+
+QIOSMenu::QIOSMenu()
+    : QPlatformMenu()
+    , m_tag(0)
+    , m_enabled(true)
+    , m_visible(true)
+    , m_text(QString())
+    , m_menuType(DefaultMenu)
+    , m_effectiveMenuType(DefaultMenu)
+    , m_parentWindow(0)
+    , m_targetItem(0)
+    , m_menuController(0)
+    , m_pickerView(0)
+{
+}
+
+QIOSMenu::~QIOSMenu()
+{
+    dismiss();
+}
+
+void QIOSMenu::insertMenuItem(QPlatformMenuItem *menuItem, QPlatformMenuItem *before)
+{
+    if (!before) {
+        m_menuItems.append(static_cast<QIOSMenuItem *>(menuItem));
+    } else {
+        int index = m_menuItems.indexOf(static_cast<QIOSMenuItem *>(before)) + 1;
+        m_menuItems.insert(index, static_cast<QIOSMenuItem *>(menuItem));
+    }
+}
+
+void QIOSMenu::removeMenuItem(QPlatformMenuItem *menuItem)
+{
+    m_menuItems.removeOne(static_cast<QIOSMenuItem *>(menuItem));
+}
+
+void QIOSMenu::setTag(quintptr tag)
+{
+    m_tag = tag;
+}
+
+quintptr QIOSMenu::tag() const
+{
+    return m_tag;
+}
+
+void QIOSMenu::setText(const QString &text)
+{
+   m_text = text;
+}
+
+void QIOSMenu::setEnabled(bool enabled)
+{
+    m_enabled = enabled;
+}
+
+void QIOSMenu::setVisible(bool visible)
+{
+    m_visible = visible;
+}
+
+void QIOSMenu::setMenuType(QPlatformMenu::MenuType type)
+{
+    m_menuType = type;
+}
+
+void QIOSMenu::handleItemSelected(QIOSMenuItem *menuItem)
+{
+    emit menuItem->activated();
+    dismiss();
+
+    if (QIOSMenu *menu = menuItem->m_menu) {
+        menu->setMenuType(m_effectiveMenuType);
+        menu->showPopup(m_parentWindow, m_targetRect, 0);
+    }
+}
+
+void QIOSMenu::showPopup(const QWindow *parentWindow, const QRect &targetRect, const QPlatformMenuItem *item)
+{
+    if (m_currentMenu == this || !m_visible || !m_enabled || !parentWindow)
+        return;
+
+    emit aboutToShow();
+
+    m_parentWindow = const_cast<QWindow *>(parentWindow);
+    m_targetRect = targetRect;
+    m_targetItem = static_cast<const QIOSMenuItem *>(item);
+
+    if (!m_parentWindow->isActive())
+        m_parentWindow->requestActivate();
+
+    if (m_currentMenu && m_currentMenu != this)
+        m_currentMenu->dismiss();
+
+    m_currentMenu = this;
+    m_effectiveMenuType = m_menuType;
+    connect(qGuiApp, &QGuiApplication::focusObjectChanged, this, &QIOSMenu::dismiss);
+
+    switch (m_effectiveMenuType) {
+    case EditMenu:
+        toggleShowUsingUIMenuController(true);
+        break;
+    default:
+        toggleShowUsingUIPickerView(true);
+        break;
+    }
+}
+
+void QIOSMenu::dismiss()
+{
+    if (m_currentMenu != this)
+        return;
+
+    emit aboutToHide();
+
+    disconnect(qGuiApp, &QGuiApplication::focusObjectChanged, this, &QIOSMenu::dismiss);
+
+    switch (m_effectiveMenuType) {
+    case EditMenu:
+        toggleShowUsingUIMenuController(false);
+        break;
+    default:
+        toggleShowUsingUIPickerView(false);
+        break;
+    }
+
+    m_currentMenu = 0;
+}
+
+void QIOSMenu::toggleShowUsingUIMenuController(bool show)
+{
+    if (show) {
+        Q_ASSERT(!m_menuController);
+        m_menuController = [[QUIMenuController alloc] initWithVisibleMenuItems:visibleMenuItems()];
+        repositionMenu();
+        connect(qGuiApp->inputMethod(), &QInputMethod::keyboardRectangleChanged, this, &QIOSMenu::repositionMenu);
+    } else {
+        disconnect(qGuiApp->inputMethod(), &QInputMethod::keyboardRectangleChanged, this, &QIOSMenu::repositionMenu);
+
+        Q_ASSERT(m_menuController);
+        [[UIMenuController sharedMenuController] setMenuVisible:NO animated:YES];
+        [m_menuController release];
+        m_menuController = 0;
+    }
+}
+
+void QIOSMenu::toggleShowUsingUIPickerView(bool show)
+{
+    static QObject *focusObjectWithPickerView = 0;
+
+    if (show) {
+        Q_ASSERT(!m_pickerView);
+        m_pickerView = [[QUIPickerView alloc] initWithVisibleMenuItems:visibleMenuItems() selectItem:m_targetItem];
+
+        Q_ASSERT(!focusObjectWithPickerView);
+        focusObjectWithPickerView = qApp->focusWindow()->focusObject();
+        focusObjectWithPickerView->installEventFilter(this);
+        qApp->inputMethod()->update(Qt::ImPlatformData);
+    } else {
+        Q_ASSERT(focusObjectWithPickerView);
+        focusObjectWithPickerView->removeEventFilter(this);
+        qApp->inputMethod()->update(Qt::ImPlatformData);
+        focusObjectWithPickerView = 0;
+
+        Q_ASSERT(m_pickerView);
+        [m_pickerView release];
+        m_pickerView = 0;
+    }
+}
+
+bool QIOSMenu::eventFilter(QObject *obj, QEvent *event)
+{
+    if (event->type() == QEvent::InputMethodQuery) {
+        QInputMethodQueryEvent *queryEvent = static_cast<QInputMethodQueryEvent *>(event);
+        if (queryEvent->queries() & Qt::ImPlatformData) {
+            // Let object fill inn default query results
+            obj->event(queryEvent);
+
+            QVariantMap imPlatformData = queryEvent->value(Qt::ImPlatformData).toMap();
+            imPlatformData.insert(kImePlatformDataInputView, QVariant::fromValue(static_cast<void *>(m_pickerView)));
+            imPlatformData.insert(kImePlatformDataInputAccessoryView, QVariant::fromValue(static_cast<void *>(m_pickerView.toolbar)));
+            queryEvent->setValue(Qt::ImPlatformData, imPlatformData);
+
+            return true;
+        }
+    }
+
+    return QObject::eventFilter(obj, event);
+}
+
+QIOSMenuItemList QIOSMenu::visibleMenuItems() const
+{
+    QIOSMenuItemList visibleMenuItems = m_menuItems;
+
+    for (int i = visibleMenuItems.count() - 1; i >= 0; --i) {
+        QIOSMenuItem *item = visibleMenuItems.at(i);
+        if (!item->m_enabled || !item->m_visible || item->m_separator)
+            visibleMenuItems.removeAt(i);
+    }
+
+    return visibleMenuItems;
+}
+
+void QIOSMenu::repositionMenu()
+{
+    switch (m_effectiveMenuType) {
+    case EditMenu: {
+        UIView *view = reinterpret_cast<UIView *>(m_parentWindow->winId());
+        [[UIMenuController sharedMenuController] setTargetRect:toCGRect(m_targetRect) inView:view];
+        [[UIMenuController sharedMenuController] setMenuVisible:YES animated:YES];
+        break; }
+    default:
+        break;
+    }
+}
+
+QPlatformMenuItem *QIOSMenu::menuItemAt(int position) const
+{
+    if (position < 0 || position >= m_menuItems.size())
+        return 0;
+    return m_menuItems.at(position);
+}
+
+QPlatformMenuItem *QIOSMenu::menuItemForTag(quintptr tag) const
+{
+    for (int i = 0; i < m_menuItems.size(); ++i) {
+        QPlatformMenuItem *item = m_menuItems.at(i);
+        if (item->tag() == tag)
+            return item;
+    }
+    return 0;
+}
diff --git a/src/plugins/platforms/ios/qiosplatformaccessibility.h b/src/plugins/platforms/ios/qiosplatformaccessibility.h
new file mode 100644
index 0000000000..4aa9dc3c7d
--- /dev/null
+++ b/src/plugins/platforms/ios/qiosplatformaccessibility.h
@@ -0,0 +1,52 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QIOSPLATFORMACCESSIBILITY_H
+#define QIOSPLATFORMACCESSIBILITY_H
+
+#include <qpa/qplatformaccessibility.h>
+
+QT_BEGIN_NAMESPACE
+
+class QIOSPlatformAccessibility: public QPlatformAccessibility
+{
+public:
+    QIOSPlatformAccessibility();
+    ~QIOSPlatformAccessibility();
+
+    virtual void notifyAccessibilityUpdate(QAccessibleEvent *event);
+};
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/plugins/platforms/winrt/qwinrtplatformtheme.cpp b/src/plugins/platforms/ios/qiosplatformaccessibility.mm
index d4034ec571..ad8bd9bdf4 100644
--- a/src/plugins/platforms/winrt/qwinrtplatformtheme.cpp
+++ b/src/plugins/platforms/ios/qiosplatformaccessibility.mm
@@ -39,38 +39,49 @@
 **
 ****************************************************************************/
 
-#include "qwinrtplatformtheme.h"
-#include "qwinrtplatformmessagedialoghelper.h"
+#include "qiosplatformaccessibility.h"
 
-QT_BEGIN_NAMESPACE
+#include <QtGui/QtGui>
+#include "qioswindow.h"
 
-QWinRTPlatformTheme::QWinRTPlatformTheme()
-{
-}
+QIOSPlatformAccessibility::QIOSPlatformAccessibility()
+{}
+
+QIOSPlatformAccessibility::~QIOSPlatformAccessibility()
+{}
 
-bool QWinRTPlatformTheme::usePlatformNativeDialog(QPlatformTheme::DialogType type) const
+
+void invalidateCache(QAccessibleInterface *iface)
 {
-#if !(defined(Q_OS_WINPHONE) && _MSC_VER<=1700)
-    if (type == QPlatformTheme::MessageDialog)
-        return true;
-#else
-    Q_UNUSED(type)
-#endif // !(Q_OS_WINPHONE && _MSC_VER<=1700)
-    return false;
+    if (!iface || !iface->isValid()) {
+        qWarning() << "invalid accessible interface: " << iface;
+        return;
+    }
+
+    QWindow *win = 0;
+    QAccessibleInterface *parent = iface;
+    do {
+        win = parent->window();
+        parent = parent->parent();
+    } while (!win && parent);
+
+    if (win && win->handle()) {
+        QIOSWindow *window = static_cast<QIOSWindow*>(win->handle());
+        window->clearAccessibleCache();
+    }
 }
 
-QPlatformDialogHelper *QWinRTPlatformTheme::createPlatformDialogHelper(QPlatformTheme::DialogType type) const
+
+void QIOSPlatformAccessibility::notifyAccessibilityUpdate(QAccessibleEvent *event)
 {
-#if !(defined(Q_OS_WINPHONE) && _MSC_VER<=1700)
-    switch (type) {
-    case QPlatformTheme::MessageDialog:
-        return new QWinRTPlatformMessageDialogHelper();
+    switch (event->type()) {
+    case QAccessible::ObjectCreated:
+    case QAccessible::ObjectShow:
+    case QAccessible::ObjectHide:
+    case QAccessible::ObjectDestroyed:
+        invalidateCache(event->accessibleInterface());
+        break;
     default:
-        return QPlatformTheme::createPlatformDialogHelper(type);
+        break;
     }
-#else // !(Q_OS_WINPHONE && _MSC_VER<=1700)
-    return QPlatformTheme::createPlatformDialogHelper(type);
-#endif // Q_OS_WINPHONE && _MSC_VER<=1700
 }
-
-QT_END_NAMESPACE
diff --git a/src/plugins/platforms/ios/qiosscreen.h b/src/plugins/platforms/ios/qiosscreen.h
index 173bd11719..7987ef82d5 100644
--- a/src/plugins/platforms/ios/qiosscreen.h
+++ b/src/plugins/platforms/ios/qiosscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,11 +47,9 @@ class QIOSScreen : public QObject, public QPlatformScreen
     Q_OBJECT
 
 public:
-    QIOSScreen(unsigned int screenIndex);
+    QIOSScreen(UIScreen *screen);
     ~QIOSScreen();
 
-    enum ScreenIndex { MainScreen = 0 };
-
     QRect geometry() const;
     QRect availableGeometry() const;
     int depth() const;
@@ -75,13 +65,10 @@ public:
     UIScreen *uiScreen() const;
 
     void updateProperties();
-    void layoutWindows();
-
-public slots:
-    void updateStatusBarVisibility();
 
 private:
     UIScreen *m_uiScreen;
+    UIWindow *m_uiWindow;
     QRect m_geometry;
     QRect m_availableGeometry;
     int m_depth;
diff --git a/src/plugins/platforms/ios/qiosscreen.mm b/src/plugins/platforms/ios/qiosscreen.mm
index 5331d05ae9..d8a49eace6 100644
--- a/src/plugins/platforms/ios/qiosscreen.mm
+++ b/src/plugins/platforms/ios/qiosscreen.mm
@@ -40,6 +40,7 @@
 ****************************************************************************/
 
 #include "qiosglobal.h"
+#include "qiosintegration.h"
 #include "qiosscreen.h"
 #include "qioswindow.h"
 #include <qpa/qwindowsysteminterface.h>
@@ -48,6 +49,63 @@
 
 #include <sys/sysctl.h>
 
+// -------------------------------------------------------------------------
+
+static QIOSScreen* qtPlatformScreenFor(UIScreen *uiScreen)
+{
+    foreach (QScreen *screen, QGuiApplication::screens()) {
+        QIOSScreen *platformScreen = static_cast<QIOSScreen *>(screen->handle());
+        if (platformScreen->uiScreen() == uiScreen)
+            return platformScreen;
+    }
+
+    return 0;
+}
+
+@interface QIOSScreenTracker : NSObject
+@end
+
+@implementation QIOSScreenTracker
+
++ (void)load
+{
+    NSNotificationCenter *center = [NSNotificationCenter defaultCenter];
+    [center addObserver:self selector:@selector(screenConnected:)
+            name:UIScreenDidConnectNotification object:nil];
+    [center addObserver:self selector:@selector(screenDisconnected:)
+            name:UIScreenDidDisconnectNotification object:nil];
+    [center addObserver:self selector:@selector(screenModeChanged:)
+            name:UIScreenModeDidChangeNotification object:nil];
+}
+
++ (void)screenConnected:(NSNotification*)notification
+{
+    QIOSIntegration *integration = QIOSIntegration::instance();
+    Q_ASSERT_X(integration, Q_FUNC_INFO, "Screen connected before QIOSIntegration creation");
+
+    integration->addScreen(new QIOSScreen([notification object]));
+}
+
++ (void)screenDisconnected:(NSNotification*)notification
+{
+    QIOSScreen *screen = qtPlatformScreenFor([notification object]);
+    Q_ASSERT_X(screen, Q_FUNC_INFO, "Screen disconnected that we didn't know about");
+
+    delete screen;
+}
+
++ (void)screenModeChanged:(NSNotification*)notification
+{
+    QIOSScreen *screen = qtPlatformScreenFor([notification object]);
+    Q_ASSERT_X(screen, Q_FUNC_INFO, "Screen changed that we didn't know about");
+
+    screen->updateProperties();
+}
+
+@end
+
+// -------------------------------------------------------------------------
+
 @interface QIOSOrientationListener : NSObject {
     @public
     QIOSScreen *m_screen;
@@ -99,6 +157,8 @@
 
 @end
 
+// -------------------------------------------------------------------------
+
 /*!
     Returns the model identifier of the device.
 
@@ -118,30 +178,52 @@ static QString deviceModelIdentifier()
     return QString::fromLatin1(value);
 }
 
-QIOSScreen::QIOSScreen(unsigned int screenIndex)
+QIOSScreen::QIOSScreen(UIScreen *screen)
     : QPlatformScreen()
-    , m_uiScreen([[UIScreen screens] count] > screenIndex
-        ? [[UIScreen screens] objectAtIndex:screenIndex]
-        : [UIScreen mainScreen])
+    , m_uiScreen(screen)
+    , m_uiWindow(0)
     , m_orientationListener(0)
 {
-    QString deviceIdentifier = deviceModelIdentifier();
-
-    if (deviceIdentifier == QStringLiteral("iPhone2,1") /* iPhone 3GS */
-        || deviceIdentifier == QStringLiteral("iPod3,1") /* iPod touch 3G */) {
-        m_depth = 18;
+    if (screen == [UIScreen mainScreen]) {
+        QString deviceIdentifier = deviceModelIdentifier();
+
+        if (deviceIdentifier == QStringLiteral("iPhone2,1") /* iPhone 3GS */
+            || deviceIdentifier == QStringLiteral("iPod3,1") /* iPod touch 3G */) {
+            m_depth = 18;
+        } else {
+            m_depth = 24;
+        }
+
+        if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPad
+            && !deviceIdentifier.contains(QRegularExpression("^iPad2,[567]$")) /* excluding iPad Mini */) {
+            m_unscaledDpi = 132;
+        } else {
+            m_unscaledDpi = 163; // Regular iPhone DPI
+        }
     } else {
+        // External display, hard to say
         m_depth = 24;
+        m_unscaledDpi = 96;
     }
 
-    if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPad
-        && !deviceIdentifier.contains(QRegularExpression("^iPad2,[567]$")) /* excluding iPad Mini */) {
-        m_unscaledDpi = 132;
-    } else {
-        m_unscaledDpi = 163; // Regular iPhone DPI
+    for (UIWindow *existingWindow in [[UIApplication sharedApplication] windows]) {
+        if (existingWindow.screen == m_uiScreen) {
+            m_uiWindow = [m_uiWindow retain];
+            break;
+        }
     }
 
-    connect(qGuiApp, &QGuiApplication::focusWindowChanged, this, &QIOSScreen::updateStatusBarVisibility);
+    if (!m_uiWindow) {
+        // Create a window and associated view-controller that we can use
+        m_uiWindow = [[UIWindow alloc] initWithFrame:[m_uiScreen bounds]];
+        m_uiWindow.rootViewController = [[[QIOSViewController alloc] initWithQIOSScreen:this] autorelease];
+
+        // FIXME: Only do once windows are added to the screen, and for any screen
+        if (screen == [UIScreen mainScreen]) {
+            m_uiWindow.screen = m_uiScreen;
+            m_uiWindow.hidden = NO;
+        }
+    }
 
     updateProperties();
 }
@@ -149,111 +231,24 @@ QIOSScreen::QIOSScreen(unsigned int screenIndex)
 QIOSScreen::~QIOSScreen()
 {
     [m_orientationListener release];
+    [m_uiWindow release];
 }
 
 void QIOSScreen::updateProperties()
 {
-    UIWindow *uiWindow = 0;
-    for (uiWindow in [[UIApplication sharedApplication] windows]) {
-        if (uiWindow.screen == m_uiScreen)
-            break;
-    }
+    QRect previousGeometry = m_geometry;
+    QRect previousAvailableGeometry = m_availableGeometry;
 
-    bool inPortrait = UIInterfaceOrientationIsPortrait(uiWindow.rootViewController.interfaceOrientation);
-    QRect geometry = inPortrait ? fromCGRect(m_uiScreen.bounds).toRect()
-        : QRect(m_uiScreen.bounds.origin.x, m_uiScreen.bounds.origin.y,
-            m_uiScreen.bounds.size.height, m_uiScreen.bounds.size.width);
+    UIView *rootView = m_uiWindow.rootViewController.view;
 
-    if (geometry != m_geometry) {
-        m_geometry = geometry;
+    m_geometry = fromCGRect([rootView convertRect:m_uiScreen.bounds fromView:m_uiWindow]).toRect();
+    m_availableGeometry = fromCGRect([rootView convertRect:m_uiScreen.applicationFrame fromView:m_uiWindow]).toRect();
 
+    if (m_geometry != previousGeometry || m_availableGeometry != previousAvailableGeometry) {
         const qreal millimetersPerInch = 25.4;
         m_physicalSize = QSizeF(m_geometry.size()) / m_unscaledDpi * millimetersPerInch;
 
-        QWindowSystemInterface::handleScreenGeometryChange(screen(), m_geometry);
-    }
-
-    QRect availableGeometry = geometry;
-
-    CGSize applicationFrameSize = m_uiScreen.applicationFrame.size;
-    int statusBarHeight = geometry.height() - (inPortrait ? applicationFrameSize.height : applicationFrameSize.width);
-
-    availableGeometry.adjust(0, statusBarHeight, 0, 0);
-
-    if (availableGeometry != m_availableGeometry) {
-        m_availableGeometry = availableGeometry;
-        QWindowSystemInterface::handleScreenAvailableGeometryChange(screen(), m_availableGeometry);
-    }
-
-    if (screen())
-        layoutWindows();
-}
-
-void QIOSScreen::updateStatusBarVisibility()
-{
-    if (!isQtApplication())
-        return;
-
-    QWindow *focusWindow = QGuiApplication::focusWindow();
-
-    // If we don't have a focus window we leave the status
-    // bar as is, so that the user can activate a new window
-    // with the same window state without the status bar jumping
-    // back and forth.
-    if (!focusWindow)
-        return;
-
-    UIView *view = reinterpret_cast<UIView *>(focusWindow->handle()->winId());
-    QIOSViewController *viewController = static_cast<QIOSViewController *>(view.viewController);
-
-    bool currentStatusBarVisibility = [UIApplication sharedApplication].statusBarHidden;
-    if (viewController.prefersStatusBarHidden == currentStatusBarVisibility)
-        return;
-
-#if QT_IOS_PLATFORM_SDK_EQUAL_OR_ABOVE(__IPHONE_7_0)
-    if (QSysInfo::MacintoshVersion >= QSysInfo::MV_IOS_7_0) {
-        [viewController setNeedsStatusBarAppearanceUpdate];
-        dispatch_async(dispatch_get_main_queue(), ^{
-            updateProperties();
-        });
-    } else
-#endif
-    {
-        [[UIApplication sharedApplication]
-            setStatusBarHidden:[viewController prefersStatusBarHidden]
-            withAnimation:UIStatusBarAnimationNone];
-
-        updateProperties();
-    }
-}
-
-void QIOSScreen::layoutWindows()
-{
-    QList<QWindow*> windows = QGuiApplication::topLevelWindows();
-
-    const QRect oldGeometry = screen()->geometry();
-    const QRect oldAvailableGeometry = screen()->availableGeometry();
-    const QRect newGeometry = geometry();
-    const QRect newAvailableGeometry = availableGeometry();
-
-    for (int i = 0; i < windows.size(); ++i) {
-        QWindow *window = windows.at(i);
-
-        if (platformScreenForWindow(window) != this)
-            continue;
-
-        QIOSWindow *platformWindow = static_cast<QIOSWindow *>(window->handle());
-        if (!platformWindow)
-            continue;
-
-        // FIXME: Handle more complex cases of no-state and/or child windows when rotating
-
-        if (window->windowState() & Qt::WindowFullScreen
-                || (window->windowState() & Qt::WindowNoState && window->geometry() == oldGeometry))
-            platformWindow->applyGeometry(newGeometry);
-        else if (window->windowState() & Qt::WindowMaximized
-                || (window->windowState() & Qt::WindowNoState && window->geometry() == oldAvailableGeometry))
-            platformWindow->applyGeometry(newAvailableGeometry);
+        QWindowSystemInterface::handleScreenGeometryChange(screen(), m_geometry, m_availableGeometry);
     }
 }
 
@@ -294,8 +289,15 @@ qreal QIOSScreen::devicePixelRatio() const
 
 Qt::ScreenOrientation QIOSScreen::nativeOrientation() const
 {
-    // A UIScreen stays in the native orientation, regardless of rotation
-    return m_uiScreen.bounds.size.width >= m_uiScreen.bounds.size.height ?
+    CGRect nativeBounds =
+#if QT_IOS_PLATFORM_SDK_EQUAL_OR_ABOVE(__IPHONE_8_0)
+        QSysInfo::MacintoshVersion >= QSysInfo::MV_IOS_8_0 ? m_uiScreen.nativeBounds :
+#endif
+        m_uiScreen.bounds;
+
+    // All known iOS devices have a native orientation of portrait, but to
+    // be on the safe side we compare the width and height of the bounds.
+    return nativeBounds.size.width >= nativeBounds.size.height ?
         Qt::LandscapeOrientation : Qt::PortraitOrientation;
 }
 
diff --git a/src/plugins/platforms/ios/qiosservices.h b/src/plugins/platforms/ios/qiosservices.h
index aa39fbbed4..91b71f8b47 100644
--- a/src/plugins/platforms/ios/qiosservices.h
+++ b/src/plugins/platforms/ios/qiosservices.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtplatformmessagedialoghelper.h b/src/plugins/platforms/ios/qiostextresponder.h
index fbb21ed69c..2923feba3b 100644
--- a/src/plugins/platforms/winrt/qwinrtplatformmessagedialoghelper.h
+++ b/src/plugins/platforms/ios/qiostextresponder.h
@@ -39,47 +39,39 @@
 **
 ****************************************************************************/
 
-#ifndef QWINRTPLATFORMMESSAGEDIALOGHELPER_H
-#define QWINRTPLATFORMMESSAGEDIALOGHELPER_H
+#import <UIKit/UIKit.h>
 
-#include <qpa/qplatformdialoghelper.h>
-#include <QtCore/QEventLoop>
-#include <QtCore/qt_windows.h>
+#include <QtCore/qstring.h>
 
-namespace ABI {
-    namespace Windows {
-        namespace UI {
-            namespace Popups {
-                struct IUICommand;
-            }
-        }
-    }
-}
+class QIOSInputContext;
 
-QT_BEGIN_NAMESPACE
+@interface QIOSTextInputResponder : UIResponder <UITextInputTraits, UIKeyInput, UITextInput>
+{
+  @public
+    QString m_markedText;
+    BOOL m_inSendEventToFocusObject;
 
-struct QWinRTPlatformMessageDialogInfo;
+  @private
+    QIOSInputContext *m_inputContext;
+}
 
-class QWinRTPlatformMessageDialogHelper : public QPlatformMessageDialogHelper
-{
-    Q_OBJECT
-public:
-    explicit QWinRTPlatformMessageDialogHelper();
-    ~QWinRTPlatformMessageDialogHelper();
+- (id)initWithInputContext:(QIOSInputContext *)context;
+- (void)notifyInputDelegate:(Qt::InputMethodQueries)updatedProperties;
 
-    void exec();
-    bool show(Qt::WindowFlags windowFlags,
-              Qt::WindowModality windowModality,
-              QWindow *parent);
-    void hide();
+@property(readwrite, retain) UIView *inputView;
+@property(readwrite, retain) UIView *inputAccessoryView;
 
-    HRESULT onInvoked(ABI::Windows::UI::Popups::IUICommand *command);
-private:
-    QWinRTPlatformMessageDialogInfo *m_info;
-    QEventLoop m_loop;
-    bool m_shown;
-};
+// UITextInputTraits
+@property(nonatomic) UITextAutocapitalizationType autocapitalizationType;
+@property(nonatomic) UITextAutocorrectionType autocorrectionType;
+@property(nonatomic) UITextSpellCheckingType spellCheckingType;
+@property(nonatomic) BOOL enablesReturnKeyAutomatically;
+@property(nonatomic) UIKeyboardAppearance keyboardAppearance;
+@property(nonatomic) UIKeyboardType keyboardType;
+@property(nonatomic) UIReturnKeyType returnKeyType;
+@property(nonatomic, getter=isSecureTextEntry) BOOL secureTextEntry;
 
-QT_END_NAMESPACE
+// UITextInput
+@property(nonatomic, assign) id<UITextInputDelegate> inputDelegate;
 
-#endif // QWINRTPLATFORMMESSAGEDIALOGHELPER_H
+@end
diff --git a/src/plugins/platforms/ios/quiview_textinput.mm b/src/plugins/platforms/ios/qiostextresponder.mm
index e65ac1cc46..54362cde7a 100644
--- a/src/plugins/platforms/ios/quiview_textinput.mm
+++ b/src/plugins/platforms/ios/qiostextresponder.mm
@@ -39,36 +39,22 @@
 **
 ****************************************************************************/
 
-#include <QtGui/qtextformat.h>
+#include "qiostextresponder.h"
 
-class StaticVariables
-{
-public:
-    QInputMethodQueryEvent inputMethodQueryEvent;
-    bool inUpdateKeyboardLayout;
-    QTextCharFormat markedTextFormat;
+#include "qiosglobal.h"
+#include "qiosinputcontext.h"
+#include "quiview.h"
 
-    StaticVariables()
-        : inputMethodQueryEvent(Qt::ImQueryInput)
-        , inUpdateKeyboardLayout(false)
-    {
-        // There seems to be no way to query how the preedit text
-        // should be drawn. So we need to hard-code the color.
-        QSysInfo::MacVersion iosVersion = QSysInfo::MacintoshVersion;
-        if (iosVersion < QSysInfo::MV_IOS_7_0)
-            markedTextFormat.setBackground(QColor(235, 239, 247));
-        else
-            markedTextFormat.setBackground(QColor(206, 221, 238));
-    }
-};
+#include <QtCore/qscopedvaluerollback.h>
 
-Q_GLOBAL_STATIC(StaticVariables, staticVariables);
+#include <QtGui/qevent.h>
+#include <QtGui/qtextformat.h>
+#include <QtGui/private/qguiapplication_p.h>
+#include <QtGui/qpa/qplatformwindow.h>
 
 // -------------------------------------------------------------------------
 
 @interface QUITextPosition : UITextPosition
-{
-}
 
 @property (nonatomic) NSUInteger index;
 + (QUITextPosition *)positionWithIndex:(NSUInteger)index;
@@ -89,8 +75,6 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
 // -------------------------------------------------------------------------
 
 @interface QUITextRange : UITextRange
-{
-}
 
 @property (nonatomic) NSRange range;
 + (QUITextRange *)rangeWithNSRange:(NSRange)range;
@@ -130,51 +114,139 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
 
 // -------------------------------------------------------------------------
 
-@implementation QUIView (TextInput)
+@interface WrapperView : UIView
+@end
+
+@implementation WrapperView
 
-- (BOOL)canBecomeFirstResponder
+-(id)initWithView:(UIView *)view
 {
-    return YES;
+    if (self = [self init]) {
+        [self addSubview:view];
+
+        self.autoresizingMask = view.autoresizingMask;
+
+        [self sizeToFit];
+    }
+
+    return self;
 }
 
-- (BOOL)becomeFirstResponder
+- (void)layoutSubviews
 {
-    // Note: QIOSInputContext controls our first responder status based on
-    // whether or not the keyboard should be open or closed.
-    [self updateTextInputTraits];
-    return [super becomeFirstResponder];
+    UIView* view = [self.subviews firstObject];
+    view.frame = self.bounds;
+
+    // FIXME: During orientation changes the size and position
+    // of the view is not respected by the host view, even if
+    // we call sizeToFit or setNeedsLayout on the superview.
 }
 
-- (BOOL)resignFirstResponder
+- (CGSize)sizeThatFits:(CGSize)size
 {
-    // Resigning first responed status means that the virtual keyboard was closed, or
-    // some other view became first responder. In either case we clear the focus object to
-    // avoid blinking cursors in line edits etc:
-    if (m_qioswindow)
-        static_cast<QWindowPrivate *>(QObjectPrivate::get(m_qioswindow->window()))->clearFocusObject();
-    return [super resignFirstResponder];
+    return [[self.subviews firstObject] sizeThatFits:size];
 }
 
-+ (bool)inUpdateKeyboardLayout
+// By keeping the responder (QIOSTextInputResponder in this case)
+// retained, we ensure that all messages sent to the view during
+// its lifetime in a window hierarcy will be able to traverse the
+// responder chain.
+-(void)willMoveToWindow:(UIWindow *)window
 {
-    return staticVariables()->inUpdateKeyboardLayout;
+    if (window)
+        [[self nextResponder] retain];
+    else
+        [[self nextResponder] autorelease];
 }
 
-- (void)updateKeyboardLayout
+@end
+
+// -------------------------------------------------------------------------
+
+@implementation QIOSTextInputResponder
+
+- (id)initWithInputContext:(QIOSInputContext *)inputContext
 {
-    if (![self isFirstResponder])
-        return;
+    if (!(self = [self init]))
+        return self;
+
+    m_inSendEventToFocusObject = NO;
+    m_inputContext = inputContext;
+
+    Qt::InputMethodHints hints = Qt::InputMethodHints([self imValue:Qt::ImHints].toUInt());
+
+    self.returnKeyType = (hints & Qt::ImhMultiLine) ? UIReturnKeyDefault : UIReturnKeyDone;
+    self.secureTextEntry = BOOL(hints & Qt::ImhHiddenText);
+    self.autocorrectionType = (hints & Qt::ImhNoPredictiveText) ?
+                UITextAutocorrectionTypeNo : UITextAutocorrectionTypeDefault;
+    self.spellCheckingType = (hints & Qt::ImhNoPredictiveText) ?
+                UITextSpellCheckingTypeNo : UITextSpellCheckingTypeDefault;
+
+    if (hints & Qt::ImhUppercaseOnly)
+        self.autocapitalizationType = UITextAutocapitalizationTypeAllCharacters;
+    else if (hints & Qt::ImhNoAutoUppercase)
+        self.autocapitalizationType = UITextAutocapitalizationTypeNone;
+    else
+        self.autocapitalizationType = UITextAutocapitalizationTypeSentences;
 
-    // There seems to be no API to inform that the keyboard layout needs to update.
-    // As a work-around, we quickly resign first responder just to reassign it again.
-    QScopedValueRollback<bool> rollback(staticVariables()->inUpdateKeyboardLayout);
-    staticVariables()->inUpdateKeyboardLayout = true;
-    [super resignFirstResponder];
-    [self updateTextInputTraits];
-    [super becomeFirstResponder];
+    if (hints & Qt::ImhUrlCharactersOnly)
+        self.keyboardType = UIKeyboardTypeURL;
+    else if (hints & Qt::ImhEmailCharactersOnly)
+        self.keyboardType = UIKeyboardTypeEmailAddress;
+    else if (hints & Qt::ImhDigitsOnly)
+        self.keyboardType = UIKeyboardTypeNumberPad;
+    else if (hints & Qt::ImhFormattedNumbersOnly)
+        self.keyboardType = UIKeyboardTypeDecimalPad;
+    else if (hints & Qt::ImhDialableCharactersOnly)
+        self.keyboardType = UIKeyboardTypeNumberPad;
+    else
+        self.keyboardType = UIKeyboardTypeDefault;
+
+    QVariantMap platformData = [self imValue:Qt::ImPlatformData].toMap();
+    if (UIView *inputView = static_cast<UIView *>(platformData.value(kImePlatformDataInputView).value<void *>()))
+        self.inputView = [[[WrapperView alloc] initWithView:inputView] autorelease];
+    if (UIView *accessoryView = static_cast<UIView *>(platformData.value(kImePlatformDataInputAccessoryView).value<void *>()))
+        self.inputAccessoryView = [[[WrapperView alloc] initWithView:accessoryView] autorelease];
+
+    return self;
+}
+
+- (void)dealloc
+{
+    self.inputView = 0;
+    self.inputAccessoryView = 0;
+    [super dealloc];
+}
+
+- (BOOL)isFirstResponder
+{
+    return YES;
+}
+
+- (UIResponder*)nextResponder
+{
+    return qApp->focusWindow() ?
+        reinterpret_cast<QUIView *>(qApp->focusWindow()->handle()->winId()) : 0;
 }
 
-- (void)updateUITextInputDelegate:(NSNumber *)intQuery
+/*!
+    iOS uses [UIResponder(Internal) _requiresKeyboardWhenFirstResponder] to check if the
+    current responder should bring up the keyboard, which in turn checks if the responder
+    supports the UIKeyInput protocol. By dynamically reporting our protocol conformance
+    we can control the keyboard visibility depending on whether or not we have a focus
+    object with IME enabled.
+*/
+- (BOOL)conformsToProtocol:(Protocol *)protocol
+{
+    if (protocol == @protocol(UIKeyInput))
+        return m_inputContext->inputMethodAccepted();
+
+    return [super conformsToProtocol:protocol];
+}
+
+// -------------------------------------------------------------------------
+
+- (void)notifyInputDelegate:(Qt::InputMethodQueries)updatedProperties
 {
     // As documented, we should not report textWillChange/textDidChange unless the text
     // was changed externally. That will cause spell checking etc to fail. But we don't
@@ -184,35 +256,17 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
     if (m_inSendEventToFocusObject)
         return;
 
-    Qt::InputMethodQueries query = Qt::InputMethodQueries([intQuery intValue]);
-    if (query & (Qt::ImCursorPosition | Qt::ImAnchorPosition)) {
-        [self.inputDelegate selectionWillChange:id<UITextInput>(self)];
-        [self.inputDelegate selectionDidChange:id<UITextInput>(self)];
+    if (updatedProperties & (Qt::ImCursorPosition | Qt::ImAnchorPosition)) {
+        [self.inputDelegate selectionWillChange:self];
+        [self.inputDelegate selectionDidChange:self];
     }
 
-    if (query & Qt::ImSurroundingText) {
-        [self.inputDelegate textWillChange:id<UITextInput>(self)];
-        [self.inputDelegate textDidChange:id<UITextInput>(self)];
+    if (updatedProperties & Qt::ImSurroundingText) {
+        [self.inputDelegate textWillChange:self];
+        [self.inputDelegate textDidChange:self];
     }
 }
 
-- (void)updateInputMethodWithQuery:(Qt::InputMethodQueries)query
-{
-    Q_UNUSED(query);
-
-    QObject *focusObject = QGuiApplication::focusObject();
-    if (!focusObject)
-        return;
-
-    // Note that we ignore \a query, and instead update using Qt::ImQueryInput. This enables us to just
-    // store the event without copying out the result from the event each time. Besides, we seem to be
-    // called with Qt::ImQueryInput when only changing selection, and always if typing text. So there would
-    // not be any performance gain by only updating \a query.
-    staticVariables()->inputMethodQueryEvent = QInputMethodQueryEvent(Qt::ImQueryInput);
-    QCoreApplication::sendEvent(focusObject, &staticVariables()->inputMethodQueryEvent);
-    [self updateUITextInputDelegate:[NSNumber numberWithInt:int(query)]];
-}
-
 - (void)sendEventToFocusObject:(QEvent &)e
 {
     QObject *focusObject = QGuiApplication::focusObject();
@@ -227,29 +281,9 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
     QCoreApplication::sendEvent(focusObject, &e);
 }
 
-- (void)reset
-{
-    [self setMarkedText:@"" selectedRange:NSMakeRange(0, 0)];
-    [self updateInputMethodWithQuery:Qt::ImQueryInput];
-    // Guard agains recursive callbacks by posting calls to UITextInput
-    [self performSelectorOnMainThread:@selector(updateKeyboardLayout) withObject:nil waitUntilDone:NO];
-    [self performSelectorOnMainThread:@selector(updateUITextInputDelegate:)
-      withObject:[NSNumber numberWithInt:int(Qt::ImQueryInput)]
-      waitUntilDone:NO];
-}
-
-- (void)commit
-{
-    [self unmarkText];
-    // Guard agains recursive callbacks by posting calls to UITextInput
-    [self performSelectorOnMainThread:@selector(updateUITextInputDelegate:)
-      withObject:[NSNumber numberWithInt:int(Qt::ImSurroundingText)]
-      waitUntilDone:NO];
-}
-
 - (QVariant)imValue:(Qt::InputMethodQuery)query
 {
-    return staticVariables()->inputMethodQueryEvent.value(query);
+    return m_inputContext->imeState().currentState.value(query);
 }
 
 -(id<UITextInputTokenizer>)tokenizer
@@ -277,7 +311,8 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
     [self sendEventToFocusObject:e];
 }
 
-- (UITextRange *)selectedTextRange {
+- (UITextRange *)selectedTextRange
+{
     int cursorPos = [self imValue:Qt::ImCursorPosition].toInt();
     int anchorPos = [self imValue:Qt::ImAnchorPosition].toInt();
     return [QUITextRange rangeWithNSRange:NSMakeRange(qMin(cursorPos, anchorPos), qAbs(anchorPos - cursorPos))];
@@ -296,8 +331,19 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
 
     m_markedText = markedText ? QString::fromNSString(markedText) : QString();
 
+    static QTextCharFormat markedTextFormat;
+    if (markedTextFormat.isEmpty()) {
+        // There seems to be no way to query how the preedit text
+        // should be drawn. So we need to hard-code the color.
+        QSysInfo::MacVersion iosVersion = QSysInfo::MacintoshVersion;
+        if (iosVersion < QSysInfo::MV_IOS_7_0)
+            markedTextFormat.setBackground(QColor(235, 239, 247));
+        else
+            markedTextFormat.setBackground(QColor(206, 221, 238));
+    }
+
     QList<QInputMethodEvent::Attribute> attrs;
-    attrs << QInputMethodEvent::Attribute(QInputMethodEvent::TextFormat, 0, markedText.length, staticVariables()->markedTextFormat);
+    attrs << QInputMethodEvent::Attribute(QInputMethodEvent::TextFormat, 0, markedText.length, markedTextFormat);
     QInputMethodEvent e(m_markedText, attrs);
     [self sendEventToFocusObject:e];
 }
@@ -325,7 +371,8 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
     return NSOrderedSame;
 }
 
-- (UITextRange *)markedTextRange {
+- (UITextRange *)markedTextRange
+{
     return m_markedText.isEmpty() ? nil : [QUITextRange rangeWithNSRange:NSMakeRange(0, m_markedText.length())];
 }
 
@@ -369,7 +416,8 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
     // to be relative to the view this method returns.
     // Since QInputMethod returns rects relative to the top level
     // QWindow, that is also the view we need to return.
-    QPlatformWindow *topLevel = m_qioswindow;
+    Q_ASSERT(qApp->focusWindow()->handle());
+    QPlatformWindow *topLevel = qApp->focusWindow()->handle();
     while (QPlatformWindow *p = topLevel->parent())
         topLevel = p;
     return reinterpret_cast<UIView *>(topLevel->winId());
@@ -522,14 +570,15 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
         return;
 
     if ([text isEqualToString:@"\n"]) {
-        if (self.returnKeyType == UIReturnKeyDone)
-            qApp->inputMethod()->hide();
-
         QKeyEvent press(QEvent::KeyPress, Qt::Key_Return, Qt::NoModifier);
         QKeyEvent release(QEvent::KeyRelease, Qt::Key_Return, Qt::NoModifier);
         [self sendEventToFocusObject:press];
         [self sendEventToFocusObject:release];
 
+        Qt::InputMethodHints imeHints = static_cast<Qt::InputMethodHints>([self imValue:Qt::ImHints].toUInt());
+        if (!(imeHints & Qt::ImhMultiLine))
+            m_inputContext->hideVirtualKeyboard();
+
         return;
     }
 
@@ -549,47 +598,4 @@ Q_GLOBAL_STATIC(StaticVariables, staticVariables);
     [self sendEventToFocusObject:release];
 }
 
-- (void)updateTextInputTraits
-{
-    // Ask the current focus object what kind of input it
-    // expects, and configure the keyboard appropriately:
-    QObject *focusObject = QGuiApplication::focusObject();
-    if (!focusObject)
-        return;
-    QInputMethodQueryEvent queryEvent(Qt::ImEnabled | Qt::ImHints);
-    if (!QCoreApplication::sendEvent(focusObject, &queryEvent))
-        return;
-    if (!queryEvent.value(Qt::ImEnabled).toBool())
-        return;
-
-    Qt::InputMethodHints hints = static_cast<Qt::InputMethodHints>(queryEvent.value(Qt::ImHints).toUInt());
-
-    self.returnKeyType = (hints & Qt::ImhMultiLine) ? UIReturnKeyDefault : UIReturnKeyDone;
-    self.secureTextEntry = BOOL(hints & Qt::ImhHiddenText);
-    self.autocorrectionType = (hints & Qt::ImhNoPredictiveText) ?
-                UITextAutocorrectionTypeNo : UITextAutocorrectionTypeDefault;
-    self.spellCheckingType = (hints & Qt::ImhNoPredictiveText) ?
-                UITextSpellCheckingTypeNo : UITextSpellCheckingTypeDefault;
-
-    if (hints & Qt::ImhUppercaseOnly)
-        self.autocapitalizationType = UITextAutocapitalizationTypeAllCharacters;
-    else if (hints & Qt::ImhNoAutoUppercase)
-        self.autocapitalizationType = UITextAutocapitalizationTypeNone;
-    else
-        self.autocapitalizationType = UITextAutocapitalizationTypeSentences;
-
-    if (hints & Qt::ImhUrlCharactersOnly)
-        self.keyboardType = UIKeyboardTypeURL;
-    else if (hints & Qt::ImhEmailCharactersOnly)
-        self.keyboardType = UIKeyboardTypeEmailAddress;
-    else if (hints & Qt::ImhDigitsOnly)
-        self.keyboardType = UIKeyboardTypeNumberPad;
-    else if (hints & Qt::ImhFormattedNumbersOnly)
-        self.keyboardType = UIKeyboardTypeDecimalPad;
-    else if (hints & Qt::ImhDialableCharactersOnly)
-        self.keyboardType = UIKeyboardTypeNumberPad;
-    else
-        self.keyboardType = UIKeyboardTypeDefault;
-}
-
 @end
diff --git a/src/plugins/platforms/ios/qiostheme.h b/src/plugins/platforms/ios/qiostheme.h
index b03f65f556..16b330a030 100644
--- a/src/plugins/platforms/ios/qiostheme.h
+++ b/src/plugins/platforms/ios/qiostheme.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,9 @@ public:
 
     QVariant themeHint(ThemeHint hint) const;
 
+    QPlatformMenuItem* createPlatformMenuItem() const Q_DECL_OVERRIDE;
+    QPlatformMenu* createPlatformMenu() const Q_DECL_OVERRIDE;
+
     const QFont *font(Font type = SystemFont) const;
 
     static const char *name;
diff --git a/src/plugins/platforms/ios/qiostheme.mm b/src/plugins/platforms/ios/qiostheme.mm
index e51e97bd5a..cbeb157cf2 100644
--- a/src/plugins/platforms/ios/qiostheme.mm
+++ b/src/plugins/platforms/ios/qiostheme.mm
@@ -53,6 +53,8 @@
 #include <UIKit/UIFont.h>
 #include <UIKit/UIInterface.h>
 
+#include "qiosmenu.h"
+
 QT_BEGIN_NAMESPACE
 
 const char *QIOSTheme::name = "ios";
@@ -66,6 +68,16 @@ QIOSTheme::~QIOSTheme()
     qDeleteAll(m_fonts);
 }
 
+QPlatformMenuItem* QIOSTheme::createPlatformMenuItem() const
+{
+    return new QIOSMenuItem();
+}
+
+QPlatformMenu* QIOSTheme::createPlatformMenu() const
+{
+    return new QIOSMenu();
+}
+
 QVariant QIOSTheme::themeHint(ThemeHint hint) const
 {
     switch (hint) {
diff --git a/src/plugins/platforms/ios/qiosviewcontroller.h b/src/plugins/platforms/ios/qiosviewcontroller.h
index a0017808d3..cbb28aec0d 100644
--- a/src/plugins/platforms/ios/qiosviewcontroller.h
+++ b/src/plugins/platforms/ios/qiosviewcontroller.h
@@ -1,47 +1,48 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #import <UIKit/UIKit.h>
 
-@interface QIOSViewController : UIViewController
-- (BOOL)prefersStatusBarHidden;
+class QIOSScreen;
+
+@interface QIOSViewController : UIViewController {
+    QIOSScreen *m_screen;
+}
+
+@property (nonatomic, assign) BOOL changingOrientation;
+@property (nonatomic, assign) BOOL prefersStatusBarHidden;
+
+- (id)initWithQIOSScreen:(QIOSScreen *)screen;
+- (void)updateProperties;
 @end
 
diff --git a/src/plugins/platforms/ios/qiosviewcontroller.mm b/src/plugins/platforms/ios/qiosviewcontroller.mm
index 2fe679fc20..ca8d48bf6d 100644
--- a/src/plugins/platforms/ios/qiosviewcontroller.mm
+++ b/src/plugins/platforms/ios/qiosviewcontroller.mm
@@ -50,9 +50,179 @@
 #include "qiosscreen.h"
 #include "qiosglobal.h"
 #include "qioswindow.h"
+#include "quiview.h"
+
+// -------------------------------------------------------------------------
+
+@interface QIOSDesktopManagerView : UIView
+@end
+
+@implementation QIOSDesktopManagerView
+
+- (void)layoutSubviews
+{
+    for (int i = int(self.subviews.count) - 1; i >= 0; --i) {
+        UIView *view = static_cast<UIView *>([self.subviews objectAtIndex:i]);
+        if (![view isKindOfClass:[QUIView class]])
+            continue;
+
+        [self layoutView: static_cast<QUIView *>(view)];
+    }
+}
+
+- (void)layoutView:(QUIView *)view
+{
+    QWindow *window = view.qwindow;
+    Q_ASSERT(window->handle());
+
+    // Re-apply window states to update geometry
+    if (window->windowState() & (Qt::WindowFullScreen | Qt::WindowMaximized))
+        window->handle()->setWindowState(window->windowState());
+}
+
+// Even if the root view controller has both wantsFullScreenLayout and
+// extendedLayoutIncludesOpaqueBars enabled, iOS will still push the root
+// view down 20 pixels (and shrink the view accordingly) when the in-call
+// statusbar is active (instead of updating the topLayoutGuide). Since
+// we treat the root view controller as our screen, we want to reflect
+// the in-call statusbar as a change in available geometry, not in screen
+// geometry. To simplify the screen geometry mapping code we reset the
+// view modifications that iOS does and take the statusbar height
+// explicitly into account in QIOSScreen::updateProperties().
+
+- (void)setFrame:(CGRect)newFrame
+{
+    [super setFrame:CGRectMake(0, 0, CGRectGetWidth(newFrame), CGRectGetHeight(self.window.bounds))];
+}
+
+- (void)setBounds:(CGRect)newBounds
+{
+    CGRect transformedWindowBounds = [self convertRect:self.window.bounds fromView:self.window];
+    [super setBounds:CGRectMake(0, 0, CGRectGetWidth(newBounds), CGRectGetHeight(transformedWindowBounds))];
+}
+
+- (void)setCenter:(CGPoint)newCenter
+{
+    Q_UNUSED(newCenter);
+    [super setCenter:self.window.center];
+}
+
+- (void)didMoveToWindow
+{
+    // The initial frame computed during startup may happen before the view has
+    // a window, meaning our calculations above will be wrong. We ensure that the
+    // frame is set correctly once we have a window to base our calulations on.
+    [self setFrame:self.window.bounds];
+}
+
+@end
+
+// -------------------------------------------------------------------------
 
 @implementation QIOSViewController
 
+- (id)initWithQIOSScreen:(QIOSScreen *)screen
+{
+    if (self = [self init]) {
+        m_screen = screen;
+
+#if QT_IOS_DEPLOYMENT_TARGET_BELOW(__IPHONE_7_0)
+        QSysInfo::MacVersion iosVersion = QSysInfo::MacintoshVersion;
+
+        // We prefer to keep the root viewcontroller in fullscreen layout, so that
+        // we don't have to compensate for the viewcontroller position. This also
+        // gives us the same behavior on iOS 5/6 as on iOS 7, where full screen layout
+        // is the only way.
+        if (iosVersion < QSysInfo::MV_IOS_7_0)
+            self.wantsFullScreenLayout = YES;
+
+        // Use translucent statusbar by default on iOS6 iPhones (unless the user changed
+        // the default in the Info.plist), so that windows placed under the stausbar are
+        // still visible, just like on iOS7.
+        if (screen->uiScreen() == [UIScreen mainScreen]
+            && iosVersion >= QSysInfo::MV_IOS_6_0 && iosVersion < QSysInfo::MV_IOS_7_0
+            && [UIDevice currentDevice].userInterfaceIdiom == UIUserInterfaceIdiomPhone
+            && [UIApplication sharedApplication].statusBarStyle == UIStatusBarStyleDefault)
+            [[UIApplication sharedApplication] setStatusBarStyle:UIStatusBarStyleBlackTranslucent];
+#endif
+
+        self.changingOrientation = NO;
+
+        // Status bar may be initially hidden at startup through Info.plist
+        self.prefersStatusBarHidden = infoPlistValue(@"UIStatusBarHidden", false);
+
+        QObject::connect(qApp, &QGuiApplication::focusWindowChanged, [self]() {
+            [self updateProperties];
+        });
+    }
+
+    return self;
+}
+
+- (void)loadView
+{
+    self.view = [[[QIOSDesktopManagerView alloc] init] autorelease];
+}
+
+- (void)viewDidLoad
+{
+    [super viewDidLoad];
+
+    NSNotificationCenter *center = [NSNotificationCenter defaultCenter];
+    [center addObserver:self selector:@selector(willChangeStatusBarFrame:)
+            name:UIApplicationWillChangeStatusBarFrameNotification
+            object:[UIApplication sharedApplication]];
+}
+
+- (void)viewDidUnload
+{
+    [[NSNotificationCenter defaultCenter] removeObserver:self name:nil object:nil];
+    [super viewDidUnload];
+}
+
+// -------------------------------------------------------------------------
+
+- (void)updateProperties
+{
+    if (!isQtApplication())
+        return;
+
+    QWindow *focusWindow = QGuiApplication::focusWindow();
+
+    // If we don't have a focus window we leave the statusbar
+    // as is, so that the user can activate a new window with
+    // the same window state without the status bar jumping
+    // back and forth.
+    if (!focusWindow)
+        return;
+
+    // We only care about changes to focusWindow that involves our screen
+    if (!focusWindow->screen() || focusWindow->screen()->handle() != m_screen)
+        return;
+
+    // All decisions are based on the the top level window
+    focusWindow = qt_window_private(focusWindow)->topLevelWindow();
+
+    bool currentStatusBarVisibility = self.prefersStatusBarHidden;
+    self.prefersStatusBarHidden = focusWindow->windowState() == Qt::WindowFullScreen;
+    if (self.prefersStatusBarHidden != currentStatusBarVisibility) {
+#if QT_IOS_PLATFORM_SDK_EQUAL_OR_ABOVE(__IPHONE_7_0)
+        if (QSysInfo::MacintoshVersion >= QSysInfo::MV_IOS_7_0) {
+            [self setNeedsStatusBarAppearanceUpdate];
+        } else
+#endif
+        {
+            [[UIApplication sharedApplication]
+                setStatusBarHidden:self.prefersStatusBarHidden
+                withAnimation:UIStatusBarAnimationNone];
+        }
+
+        [self.view setNeedsLayout];
+    }
+}
+
+// -------------------------------------------------------------------------
+
 -(BOOL)shouldAutorotate
 {
     // Until a proper orientation and rotation API is in place, we always auto rotate.
@@ -77,16 +247,55 @@
 }
 #endif
 
-- (void)willAnimateRotationToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation duration:(NSTimeInterval)duration
+- (void)willRotateToInterfaceOrientation:(UIInterfaceOrientation)orientation duration:(NSTimeInterval)duration
 {
+    Q_UNUSED(orientation);
     Q_UNUSED(duration);
-    Q_UNUSED(interfaceOrientation);
 
+    self.changingOrientation = YES;
+}
+
+- (void)didRotateFromInterfaceOrientation:(UIInterfaceOrientation)orientation
+{
+    Q_UNUSED(orientation);
+
+    self.changingOrientation = NO;
+}
+
+- (void)willChangeStatusBarFrame:(NSNotification*)notification
+{
+    Q_UNUSED(notification);
+
+    if (self.view.window.screen != [UIScreen mainScreen])
+        return;
+
+    // Orientation changes will already result in laying out subviews, so we don't
+    // need to do anything extra for frame changes during an orientation change.
+    // Technically we can receive another actual statusbar frame update during the
+    // orientation change that we should react to, but to simplify the logic we
+    // use a simple bool variable instead of a ignoreNextFrameChange approach.
+    if (self.changingOrientation)
+        return;
+
+    // UIKit doesn't have a delegate callback for statusbar changes that's run inside the
+    // animation block, like UIViewController's willAnimateRotationToInterfaceOrientation,
+    // nor does it expose a constant for the duration and easing of the animation. However,
+    // though poking at the various UIStatusBar methods, we can observe that the animation
+    // uses the default easing curve, and runs with a duration of 0.35 seconds.
+    static qreal kUIStatusBarAnimationDuration = 0.35;
+
+    [UIView animateWithDuration:kUIStatusBarAnimationDuration animations:^{
+        [self.view setNeedsLayout];
+        [self.view layoutIfNeeded];
+    }];
+}
+
+- (void)viewWillLayoutSubviews
+{
     if (!QCoreApplication::instance())
-        return; // FIXME: Store orientation for later (?)
+        return;
 
-    QIOSScreen *qiosScreen = static_cast<QIOSScreen *>(QGuiApplication::primaryScreen()->handle());
-    qiosScreen->updateProperties();
+    m_screen->updateProperties();
 }
 
 #if QT_IOS_PLATFORM_SDK_EQUAL_OR_ABOVE(__IPHONE_7_0)
@@ -102,17 +311,5 @@
 }
 #endif
 
-- (BOOL)prefersStatusBarHidden
-{
-    static bool hiddenFromPlist = infoPlistValue(@"UIStatusBarHidden", false);
-    if (hiddenFromPlist)
-        return YES;
-    QWindow *focusWindow = QGuiApplication::focusWindow();
-    if (!focusWindow)
-        return [UIApplication sharedApplication].statusBarHidden;
-
-    return qt_window_private(focusWindow)->topLevelWindow()->windowState() == Qt::WindowFullScreen;
-}
-
 @end
 
diff --git a/src/plugins/platforms/ios/qioswindow.h b/src/plugins/platforms/ios/qioswindow.h
index 6b6892e6e4..5bbd76fb36 100644
--- a/src/plugins/platforms/ios/qioswindow.h
+++ b/src/plugins/platforms/ios/qioswindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,6 +65,7 @@ public:
     void setParent(const QPlatformWindow *window);
     void handleContentOrientationChange(Qt::ScreenOrientation orientation);
     void setVisible(bool visible);
+    void setOpacity(qreal level) Q_DECL_OVERRIDE;
 
     bool isExposed() const Q_DECL_OVERRIDE;
 
@@ -87,6 +80,8 @@ public:
 
     WId winId() const { return WId(m_view); };
 
+    void clearAccessibleCache();
+
 private:
     void applicationStateChanged(Qt::ApplicationState state);
     void applyGeometry(const QRect &rect);
diff --git a/src/plugins/platforms/ios/qioswindow.mm b/src/plugins/platforms/ios/qioswindow.mm
index 6f5c96cfc1..e29ff53876 100644
--- a/src/plugins/platforms/ios/qioswindow.mm
+++ b/src/plugins/platforms/ios/qioswindow.mm
@@ -39,323 +39,23 @@
 **
 ****************************************************************************/
 
-#include "qiosglobal.h"
 #include "qioswindow.h"
-#include "quiview.h"
+
+#include "qiosapplicationdelegate.h"
 #include "qioscontext.h"
-#include "qiosinputcontext.h"
+#include "qiosglobal.h"
+#include "qiosintegration.h"
 #include "qiosscreen.h"
-#include "qiosapplicationdelegate.h"
 #include "qiosviewcontroller.h"
-#include "qiosintegration.h"
-#include <QtGui/private/qguiapplication_p.h>
+#include "quiview.h"
+
 #include <QtGui/private/qwindow_p.h>
 #include <qpa/qplatformintegration.h>
 
 #import <QuartzCore/CAEAGLLayer.h>
 
-#include <QtGui/QKeyEvent>
-#include <qpa/qwindowsysteminterface.h>
-
 #include <QtDebug>
 
-// Include category as an alternative to using -ObjC (Apple QA1490)
-#include "quiview_textinput.mm"
-
-@implementation QUIView
-
-@synthesize autocapitalizationType;
-@synthesize autocorrectionType;
-@synthesize enablesReturnKeyAutomatically;
-@synthesize keyboardAppearance;
-@synthesize keyboardType;
-@synthesize returnKeyType;
-@synthesize secureTextEntry;
-
-+ (Class)layerClass
-{
-    return [CAEAGLLayer class];
-}
-
--(id)initWithQIOSWindow:(QIOSWindow *)window
-{
-    if (self = [self initWithFrame:toCGRect(window->geometry())])
-        m_qioswindow = window;
-
-    return self;
-}
-
-- (id)initWithFrame:(CGRect)frame
-{
-    if ((self = [super initWithFrame:frame])) {
-        // Set up EAGL layer
-        CAEAGLLayer *eaglLayer = static_cast<CAEAGLLayer *>(self.layer);
-        eaglLayer.opaque = TRUE;
-        eaglLayer.drawableProperties = [NSDictionary dictionaryWithObjectsAndKeys:
-            [NSNumber numberWithBool:YES], kEAGLDrawablePropertyRetainedBacking,
-            kEAGLColorFormatRGBA8, kEAGLDrawablePropertyColorFormat, nil];
-
-        if (isQtApplication())
-            self.hidden = YES;
-
-        self.multipleTouchEnabled = YES;
-        m_inSendEventToFocusObject = NO;
-    }
-
-    return self;
-}
-
-- (void)willMoveToWindow:(UIWindow *)newWindow
-{
-    // UIKIt will normally set the scale factor of a view to match the corresponding
-    // screen scale factor, but views backed by CAEAGLLayers need to do this manually.
-    self.contentScaleFactor = newWindow && newWindow.screen ?
-        newWindow.screen.scale : [[UIScreen mainScreen] scale];
-
-    // FIXME: Allow the scale factor to be customized through QSurfaceFormat.
-}
-
-- (void)didAddSubview:(UIView *)subview
-{
-    if ([subview isKindOfClass:[QUIView class]])
-        self.clipsToBounds = YES;
-}
-
-- (void)willRemoveSubview:(UIView *)subview
-{
-    for (UIView *view in self.subviews) {
-        if (view != subview && [view isKindOfClass:[QUIView class]])
-            return;
-    }
-
-    self.clipsToBounds = NO;
-}
-
-- (void)setNeedsDisplay
-{
-    [super setNeedsDisplay];
-
-    // We didn't implement drawRect: so we have to manually
-    // mark the layer as needing display.
-    [self.layer setNeedsDisplay];
-}
-
-- (void)layoutSubviews
-{
-    // This method is the de facto way to know that view has been resized,
-    // or otherwise needs invalidation of its buffers. Note though that we
-    // do not get this callback when the view just changes its position, so
-    // the position of our QWindow (and platform window) will only get updated
-    // when the size is also changed.
-
-    if (!CGAffineTransformIsIdentity(self.transform))
-        qWarning() << m_qioswindow->window()
-            << "is backed by a UIView that has a transform set. This is not supported.";
-
-    // The original geometry requested by setGeometry() might be different
-    // from what we end up with after applying window constraints.
-    QRect requestedGeometry = m_qioswindow->geometry();
-
-    QRect actualGeometry;
-    if (m_qioswindow->window()->isTopLevel()) {
-        UIWindow *uiWindow = self.window;
-        UIView *rootView = uiWindow.rootViewController.view;
-        CGRect rootViewPositionInRelationToRootViewController =
-            [rootView convertRect:uiWindow.bounds fromView:uiWindow];
-
-        actualGeometry = fromCGRect(CGRectOffset([self.superview convertRect:self.frame toView:rootView],
-                                    -rootViewPositionInRelationToRootViewController.origin.x,
-                                    -rootViewPositionInRelationToRootViewController.origin.y
-                                    + rootView.bounds.origin.y)).toRect();
-    } else {
-        actualGeometry = fromCGRect(self.frame).toRect();
-    }
-
-    // Persist the actual/new geometry so that QWindow::geometry() can
-    // be queried on the resize event.
-    m_qioswindow->QPlatformWindow::setGeometry(actualGeometry);
-
-    QRect previousGeometry = requestedGeometry != actualGeometry ?
-            requestedGeometry : qt_window_private(m_qioswindow->window())->geometry;
-
-    QWindowSystemInterface::handleGeometryChange(m_qioswindow->window(), actualGeometry, previousGeometry);
-    QWindowSystemInterface::flushWindowSystemEvents();
-
-    if (actualGeometry.size() != previousGeometry.size()) {
-        // Trigger expose event on resize
-        [self setNeedsDisplay];
-
-        // A new size means we also need to resize the FBO's corresponding buffers,
-        // but we defer that to when the application calls makeCurrent.
-    }
-}
-
-- (void)displayLayer:(CALayer *)layer
-{
-    Q_UNUSED(layer);
-    Q_ASSERT(layer == self.layer);
-
-    [self sendUpdatedExposeEvent];
-}
-
-- (void)sendUpdatedExposeEvent
-{
-    QRegion region;
-
-    if (m_qioswindow->isExposed()) {
-        QSize bounds = fromCGRect(self.layer.bounds).toRect().size();
-
-        Q_ASSERT(m_qioswindow->geometry().size() == bounds);
-        Q_ASSERT(self.hidden == !m_qioswindow->window()->isVisible());
-
-        region = QRect(QPoint(), bounds);
-    }
-
-    QWindowSystemInterface::handleExposeEvent(m_qioswindow->window(), region);
-    QWindowSystemInterface::flushWindowSystemEvents();
-}
-
-- (void)updateTouchList:(NSSet *)touches withState:(Qt::TouchPointState)state
-{
-    // We deliver touch events in global coordinates. But global in this respect
-    // means the same coordinate system that we use for describing the geometry
-    // of the top level QWindow we're inside. And that would be the coordinate
-    // system of the superview of the UIView that backs that window:
-    QPlatformWindow *topLevel = m_qioswindow;
-    while (QPlatformWindow *topLevelParent = topLevel->parent())
-        topLevel = topLevelParent;
-    UIView *rootView = reinterpret_cast<UIView *>(topLevel->winId()).superview;
-    CGSize rootViewSize = rootView.frame.size;
-
-    foreach (UITouch *uiTouch, m_activeTouches.keys()) {
-        QWindowSystemInterface::TouchPoint &touchPoint = m_activeTouches[uiTouch];
-        if (![touches containsObject:uiTouch]) {
-            touchPoint.state = Qt::TouchPointStationary;
-        } else {
-            touchPoint.state = state;
-            touchPoint.pressure = (state == Qt::TouchPointReleased) ? 0.0 : 1.0;
-            QPoint touchPos = fromCGPoint([uiTouch locationInView:rootView]).toPoint();
-            touchPoint.area = QRectF(touchPos, QSize(0, 0));
-            touchPoint.normalPosition = QPointF(touchPos.x() / rootViewSize.width, touchPos.y() / rootViewSize.height);
-        }
-    }
-}
-
-- (void) sendTouchEventWithTimestamp:(ulong)timeStamp
-{
-    // Send touch event synchronously
-    QIOSIntegration *iosIntegration = static_cast<QIOSIntegration *>(QGuiApplicationPrivate::platformIntegration());
-    QWindowSystemInterface::handleTouchEvent(m_qioswindow->window(), timeStamp, iosIntegration->touchDevice(), m_activeTouches.values());
-    QWindowSystemInterface::flushWindowSystemEvents();
-}
-
-- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event
-{
-    // UIKit generates [Began -> Moved -> Ended] event sequences for
-    // each touch point. Internally we keep a hashmap of active UITouch
-    // points to QWindowSystemInterface::TouchPoints, and assigns each TouchPoint
-    // an id for use by Qt.
-    for (UITouch *touch in touches) {
-        Q_ASSERT(!m_activeTouches.contains(touch));
-        m_activeTouches[touch].id = m_nextTouchId++;
-    }
-
-    if (m_activeTouches.size() == 1) {
-        QPlatformWindow *topLevel = m_qioswindow;
-        while (QPlatformWindow *p = topLevel->parent())
-            topLevel = p;
-        if (topLevel->window() != QGuiApplication::focusWindow())
-            topLevel->requestActivateWindow();
-    }
-
-    [self updateTouchList:touches withState:Qt::TouchPointPressed];
-    [self sendTouchEventWithTimestamp:ulong(event.timestamp * 1000)];
-}
-
-- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event
-{
-    [self updateTouchList:touches withState:Qt::TouchPointMoved];
-    [self sendTouchEventWithTimestamp:ulong(event.timestamp * 1000)];
-}
-
-- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event
-{
-    [self updateTouchList:touches withState:Qt::TouchPointReleased];
-    [self sendTouchEventWithTimestamp:ulong(event.timestamp * 1000)];
-
-    // Remove ended touch points from the active set:
-    for (UITouch *touch in touches)
-        m_activeTouches.remove(touch);
-    if (m_activeTouches.isEmpty())
-        m_nextTouchId = 0;
-}
-
-- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event
-{
-    if (m_activeTouches.isEmpty())
-        return;
-
-    // When four-finger swiping, we get a touchesCancelled callback
-    // which includes all four touch points. The swipe gesture is
-    // then active until all four touches have been released, and
-    // we start getting touchesBegan events again.
-
-    // When five-finger pinching, we also get a touchesCancelled
-    // callback with all five touch points, but the pinch gesture
-    // ends when the second to last finger is released from the
-    // screen. The last finger will not emit any more touch
-    // events, _but_, will contribute to starting another pinch
-    // gesture. That second pinch gesture will _not_ trigger a
-    // touchesCancelled event when starting, but as each finger
-    // is released, and we may get touchesMoved events for the
-    // remaining fingers. [event allTouches] also contains one
-    // less touch point than it should, so this behavior is
-    // likely a bug in the iOS system gesture recognizer, but we
-    // have to take it into account when maintaining the Qt state.
-    // We do this by assuming that there are no cases where a
-    // sub-set of the active touch events are intentionally cancelled.
-
-    if (touches && (static_cast<NSInteger>([touches count]) != m_activeTouches.count()))
-        qWarning("Subset of active touches cancelled by UIKit");
-
-    m_activeTouches.clear();
-    m_nextTouchId = 0;
-
-    NSTimeInterval timestamp = event ? event.timestamp : [[NSProcessInfo processInfo] systemUptime];
-
-    // Send cancel touch event synchronously
-    QIOSIntegration *iosIntegration = static_cast<QIOSIntegration *>(QGuiApplicationPrivate::platformIntegration());
-    QWindowSystemInterface::handleTouchCancelEvent(m_qioswindow->window(), ulong(timestamp * 1000), iosIntegration->touchDevice());
-    QWindowSystemInterface::flushWindowSystemEvents();
-}
-
-@end
-
-@implementation UIView (QIOS)
-
-- (QWindow *)qwindow
-{
-    if ([self isKindOfClass:[QUIView class]]) {
-        if (QIOSWindow *w = static_cast<QUIView *>(self)->m_qioswindow)
-            return w->window();
-    }
-    return nil;
-}
-
-- (UIViewController *)viewController
-{
-    id responder = self;
-    while ((responder = [responder nextResponder])) {
-        if ([responder isKindOfClass:UIViewController.class])
-            return responder;
-    }
-    return nil;
-}
-
-@end
-
-QT_BEGIN_NAMESPACE
-
 QIOSWindow::QIOSWindow(QWindow *window)
     : QPlatformWindow(window)
     , m_view([[QUIView alloc] initWithQIOSWindow:this])
@@ -374,6 +74,7 @@ QIOSWindow::QIOSWindow(QWindow *window)
         screen()->availableGeometry().width(), screen()->availableGeometry().height());
 
     setWindowState(window->windowState());
+    setOpacity(window->opacity());
 }
 
 QIOSWindow::~QIOSWindow()
@@ -385,6 +86,7 @@ QIOSWindow::~QIOSWindow()
     // cancellation of all touch events.
     [m_view touchesCancelled:0 withEvent:0];
 
+    clearAccessibleCache();
     m_view->m_qioswindow = 0;
     [m_view removeFromSuperview];
     [m_view release];
@@ -417,7 +119,6 @@ void QIOSWindow::setVisible(bool visible)
 
     if (visible) {
         requestActivateWindow();
-        static_cast<QIOSScreen *>(screen())->updateStatusBarVisibility();
     } else {
         // Activate top-most visible QWindow:
         NSArray *subviews = m_view.viewController.view.subviews;
@@ -434,6 +135,11 @@ void QIOSWindow::setVisible(bool visible)
     }
 }
 
+void QIOSWindow::setOpacity(qreal level)
+{
+    m_view.alpha = qBound(0.0, level, 1.0);
+}
+
 void QIOSWindow::setGeometry(const QRect &rect)
 {
     m_normalGeometry = rect;
@@ -471,24 +177,7 @@ void QIOSWindow::applyGeometry(const QRect &rect)
     // The baseclass takes care of persisting this for us.
     QPlatformWindow::setGeometry(rect);
 
-    if (window()->isTopLevel()) {
-        // The QWindow is in QScreen coordinates, which maps to a possibly rotated root-view-controller.
-        // Since the root-view-controller might be translated in relation to the UIWindow, we need to
-        // check specifically for that and compensate. Also check if the root view has been scrolled
-        // as a result of the keyboard being open.
-        UIWindow *uiWindow = m_view.window;
-        UIView *rootView = uiWindow.rootViewController.view;
-        CGRect rootViewPositionInRelationToRootViewController =
-            [rootView convertRect:uiWindow.bounds fromView:uiWindow];
-
-        m_view.frame = CGRectOffset([m_view.superview convertRect:toCGRect(rect) fromView:rootView],
-                rootViewPositionInRelationToRootViewController.origin.x,
-                rootViewPositionInRelationToRootViewController.origin.y
-                + rootView.bounds.origin.y);
-    } else {
-        // Easy, in parent's coordinates
-        m_view.frame = toCGRect(rect);
-    }
+    m_view.frame = toCGRect(rect);
 
     // iOS will automatically trigger -[layoutSubviews:] for resize,
     // but not for move, so we force it just in case.
@@ -512,7 +201,7 @@ void QIOSWindow::setWindowState(Qt::WindowState state)
     qt_window_private(window())->windowState = state;
 
     if (window()->isTopLevel() && window()->isVisible() && window()->isActive())
-        static_cast<QIOSScreen *>(screen())->updateStatusBarVisibility();
+        [m_view.qtViewController updateProperties];
 
     switch (state) {
     case Qt::WindowNoState:
@@ -557,12 +246,12 @@ void QIOSWindow::requestActivateWindow()
     if (blockedByModal())
         return;
 
+    Q_ASSERT(m_view.window);
     [m_view.window makeKeyWindow];
+    [m_view becomeFirstResponder];
 
     if (window()->isTopLevel())
         raise();
-
-    QWindowSystemInterface::handleWindowActivated(window());
 }
 
 void QIOSWindow::raiseOrLower(bool raise)
@@ -634,6 +323,11 @@ qreal QIOSWindow::devicePixelRatio() const
     return m_view.contentScaleFactor;
 }
 
+void QIOSWindow::clearAccessibleCache()
+{
+    [m_view clearAccessibleCache];
+}
+
 #include "moc_qioswindow.cpp"
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/ios/quiaccessibilityelement.h b/src/plugins/platforms/ios/quiaccessibilityelement.h
new file mode 100644
index 0000000000..31ba5af870
--- /dev/null
+++ b/src/plugins/platforms/ios/quiaccessibilityelement.h
@@ -0,0 +1,50 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QUIACCESSIBILITYELEMENT_H
+#define QUIACCESSIBILITYELEMENT_H
+
+#import <UIKit/UIKit.h>
+#import <QtGui/QtGui>
+
+@interface QMacAccessibilityElement : UIAccessibilityElement
+{}
+
+@property (readonly) QAccessible::Id axid;
+
+- (id) initWithId: (QAccessible::Id) anId withAccessibilityContainer: (id) view;
++ (QMacAccessibilityElement *) elementWithId: (QAccessible::Id) anId withAccessibilityContainer: (id) view;
+
+@end
+
+#endif
diff --git a/src/plugins/platforms/ios/quiaccessibilityelement.mm b/src/plugins/platforms/ios/quiaccessibilityelement.mm
new file mode 100644
index 0000000000..331c38460c
--- /dev/null
+++ b/src/plugins/platforms/ios/quiaccessibilityelement.mm
@@ -0,0 +1,193 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "quiaccessibilityelement.h"
+
+#include "private/qaccessiblecache_p.h"
+
+@implementation QMacAccessibilityElement
+
+- (id) initWithId: (QAccessible::Id) anId withAccessibilityContainer: (id) view
+{
+    Q_ASSERT((int)anId < 0);
+    self = [super initWithAccessibilityContainer: view];
+    if (self)
+        _axid = anId;
+
+    return self;
+}
+
++ (id) elementWithId: (QAccessible::Id) anId withAccessibilityContainer: (id) view
+{
+    Q_ASSERT(anId);
+    if (!anId)
+        return nil;
+
+    QAccessibleCache *cache = QAccessibleCache::instance();
+
+    QMacAccessibilityElement *element = cache->elementForId(anId);
+    if (!element) {
+        Q_ASSERT(QAccessible::accessibleInterface(anId));
+        element = [[self alloc] initWithId:anId withAccessibilityContainer: view];
+        cache->insertElement(anId, element);
+    }
+    return element;
+}
+
+- (void) invalidate
+{
+    [self release];
+}
+
+- (BOOL) isAccessibilityElement
+{
+    return YES;
+}
+
+- (NSString*) accessibilityLabel
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (!iface) {
+        qWarning() << "invalid accessible interface for: " << self.axid;
+        return @"";
+    }
+
+    return iface->text(QAccessible::Name).toNSString();
+}
+
+- (NSString*) accessibilityHint
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (!iface) {
+        qWarning() << "invalid accessible interface for: " << self.axid;
+        return @"";
+    }
+    return iface->text(QAccessible::Description).toNSString();
+}
+
+- (NSString*) accessibilityValue
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (!iface) {
+        qWarning() << "invalid accessible interface for: " << self.axid;
+        return @"";
+    }
+
+    QAccessible::State state = iface->state();
+
+    if (state.checkable)
+        return state.checked ? @"checked" : @"unchecked"; // FIXME: translation
+
+    QAccessibleValueInterface *val = iface->valueInterface();
+    if (val) {
+        return val->currentValue().toString().toNSString();
+    } else if (QAccessibleTextInterface *text = iface->textInterface()) {
+        // FIXME doesn't work?
+        return text->text(0, text->characterCount() - 1).toNSString();
+    }
+
+    return [super accessibilityHint];
+}
+
+- (CGRect) accessibilityFrame
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (!iface) {
+        qWarning() << "invalid accessible interface for: " << self.axid;
+        return CGRect();
+    }
+
+    QRect rect = iface->rect();
+    return CGRectMake(rect.x(), rect.y(), rect.width(), rect.height());
+}
+
+- (UIAccessibilityTraits) accessibilityTraits
+{
+    UIAccessibilityTraits traits = UIAccessibilityTraitNone;
+
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (!iface) {
+        qWarning() << "invalid accessible interface for: " << self.axid;
+        return traits;
+    }
+    QAccessible::State state = iface->state();
+    if (state.disabled)
+        traits |= UIAccessibilityTraitNotEnabled;
+
+    if (iface->role() == QAccessible::Button)
+        traits |= UIAccessibilityTraitButton;
+
+    if (iface->valueInterface())
+        traits |= UIAccessibilityTraitAdjustable;
+
+    return traits;
+}
+
+- (BOOL) accessibilityActivate
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (QAccessibleActionInterface *action = iface->actionInterface()) {
+        if (action->actionNames().contains(QAccessibleActionInterface::pressAction())) {
+            action->doAction(QAccessibleActionInterface::pressAction());
+            return YES;
+        } else if (action->actionNames().contains(QAccessibleActionInterface::showMenuAction())) {
+            action->doAction(QAccessibleActionInterface::showMenuAction());
+            return YES;
+        }
+    }
+    return NO; // fall back to sending mouse clicks
+}
+
+- (void) accessibilityIncrement
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (QAccessibleActionInterface *action = iface->actionInterface())
+        action->doAction(QAccessibleActionInterface::increaseAction());
+}
+
+- (void) accessibilityDecrement
+{
+    QAccessibleInterface *iface = QAccessible::accessibleInterface(self.axid);
+    if (QAccessibleActionInterface *action = iface->actionInterface())
+        action->doAction(QAccessibleActionInterface::decreaseAction());
+}
+
+@end
diff --git a/src/plugins/platforms/ios/quiview.h b/src/plugins/platforms/ios/quiview.h
index 122e7c604b..fe71e5bed7 100644
--- a/src/plugins/platforms/ios/quiview.h
+++ b/src/plugins/platforms/ios/quiview.h
@@ -5,75 +5,64 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #import <UIKit/UIKit.h>
-#include "qioswindow.h"
+
+#include <qhash.h>
+#include <qstring.h>
+
+#include <qpa/qwindowsysteminterface.h>
+
+class QIOSWindow;
+
+@class QIOSViewController;
 
 @interface QUIView : UIView
 {
-@public
-    UITextAutocapitalizationType autocapitalizationType;
-    UITextAutocorrectionType autocorrectionType;
-    BOOL enablesReturnKeyAutomatically;
-    UIKeyboardAppearance keyboardAppearance;
-    UIKeyboardType keyboardType;
-    UIReturnKeyType returnKeyType;
-    BOOL secureTextEntry;
+  @public
     QIOSWindow *m_qioswindow;
+  @private
     QHash<UITouch *, QWindowSystemInterface::TouchPoint> m_activeTouches;
     int m_nextTouchId;
-    QString m_markedText;
-    BOOL m_inSendEventToFocusObject;
-}
 
-@property(nonatomic, assign) id<UITextInputDelegate> inputDelegate;
-@property(nonatomic) UITextAutocapitalizationType autocapitalizationType;
-@property(nonatomic) UITextAutocorrectionType autocorrectionType;
-@property(nonatomic) UITextSpellCheckingType spellCheckingType;
-@property(nonatomic) BOOL enablesReturnKeyAutomatically;
-@property(nonatomic) UIKeyboardAppearance keyboardAppearance;
-@property(nonatomic) UIKeyboardType keyboardType;
-@property(nonatomic) UIReturnKeyType returnKeyType;
-@property(nonatomic, getter=isSecureTextEntry) BOOL secureTextEntry;
+  @private
+    NSMutableArray *m_accessibleElements;
+};
+
+- (id)initWithQIOSWindow:(QIOSWindow *)window;
+- (void)sendUpdatedExposeEvent;
+@end
 
+@interface QUIView (Accessibility)
+- (void)clearAccessibleCache;
 @end
 
-@interface QUIView (TextInput) <UITextInput>
-- (void)updateInputMethodWithQuery:(Qt::InputMethodQueries)query;
-- (void)reset;
-- (void)commit;
-+ (bool)inUpdateKeyboardLayout;
+@interface QUIView (QtHelpers)
+- (QIOSViewController*)qtViewController;
 @end
+
diff --git a/src/plugins/platforms/ios/quiview.mm b/src/plugins/platforms/ios/quiview.mm
new file mode 100644
index 0000000000..200b07b5fc
--- /dev/null
+++ b/src/plugins/platforms/ios/quiview.mm
@@ -0,0 +1,385 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "quiview.h"
+
+#include "qiosglobal.h"
+#include "qiosintegration.h"
+#include "qiosviewcontroller.h"
+#include "qioswindow.h"
+#include "qiosmenu.h"
+
+#include <QtGui/private/qguiapplication_p.h>
+#include <QtGui/private/qwindow_p.h>
+
+@implementation QUIView
+
++ (Class)layerClass
+{
+    return [CAEAGLLayer class];
+}
+
+-(id)initWithQIOSWindow:(QIOSWindow *)window
+{
+    if (self = [self initWithFrame:toCGRect(window->geometry())])
+        m_qioswindow = window;
+
+    m_accessibleElements = [[NSMutableArray alloc] init];
+    return self;
+}
+
+- (id)initWithFrame:(CGRect)frame
+{
+    if ((self = [super initWithFrame:frame])) {
+        // Set up EAGL layer
+        CAEAGLLayer *eaglLayer = static_cast<CAEAGLLayer *>(self.layer);
+        eaglLayer.opaque = TRUE;
+        eaglLayer.drawableProperties = [NSDictionary dictionaryWithObjectsAndKeys:
+            [NSNumber numberWithBool:YES], kEAGLDrawablePropertyRetainedBacking,
+            kEAGLColorFormatRGBA8, kEAGLDrawablePropertyColorFormat, nil];
+
+        if (isQtApplication())
+            self.hidden = YES;
+
+        self.multipleTouchEnabled = YES;
+    }
+
+    return self;
+}
+
+- (void)willMoveToWindow:(UIWindow *)newWindow
+{
+    // UIKIt will normally set the scale factor of a view to match the corresponding
+    // screen scale factor, but views backed by CAEAGLLayers need to do this manually.
+    self.contentScaleFactor = newWindow && newWindow.screen ?
+        newWindow.screen.scale : [[UIScreen mainScreen] scale];
+
+    // FIXME: Allow the scale factor to be customized through QSurfaceFormat.
+}
+
+- (void)didAddSubview:(UIView *)subview
+{
+    if ([subview isKindOfClass:[QUIView class]])
+        self.clipsToBounds = YES;
+}
+
+- (void)willRemoveSubview:(UIView *)subview
+{
+    for (UIView *view in self.subviews) {
+        if (view != subview && [view isKindOfClass:[QUIView class]])
+            return;
+    }
+
+    self.clipsToBounds = NO;
+}
+
+- (void)setNeedsDisplay
+{
+    [super setNeedsDisplay];
+
+    // We didn't implement drawRect: so we have to manually
+    // mark the layer as needing display.
+    [self.layer setNeedsDisplay];
+}
+
+- (void)layoutSubviews
+{
+    // This method is the de facto way to know that view has been resized,
+    // or otherwise needs invalidation of its buffers. Note though that we
+    // do not get this callback when the view just changes its position, so
+    // the position of our QWindow (and platform window) will only get updated
+    // when the size is also changed.
+
+    if (!CGAffineTransformIsIdentity(self.transform))
+        qWarning() << m_qioswindow->window()
+            << "is backed by a UIView that has a transform set. This is not supported.";
+
+    // The original geometry requested by setGeometry() might be different
+    // from what we end up with after applying window constraints.
+    QRect requestedGeometry = m_qioswindow->geometry();
+
+    QRect actualGeometry = fromCGRect(self.frame).toRect();
+
+    // Persist the actual/new geometry so that QWindow::geometry() can
+    // be queried on the resize event.
+    m_qioswindow->QPlatformWindow::setGeometry(actualGeometry);
+
+    QRect previousGeometry = requestedGeometry != actualGeometry ?
+            requestedGeometry : qt_window_private(m_qioswindow->window())->geometry;
+
+    QWindowSystemInterface::handleGeometryChange(m_qioswindow->window(), actualGeometry, previousGeometry);
+    QWindowSystemInterface::flushWindowSystemEvents();
+
+    if (actualGeometry.size() != previousGeometry.size()) {
+        // Trigger expose event on resize
+        [self setNeedsDisplay];
+
+        // A new size means we also need to resize the FBO's corresponding buffers,
+        // but we defer that to when the application calls makeCurrent.
+    }
+}
+
+- (void)displayLayer:(CALayer *)layer
+{
+    Q_UNUSED(layer);
+    Q_ASSERT(layer == self.layer);
+
+    [self sendUpdatedExposeEvent];
+}
+
+- (void)sendUpdatedExposeEvent
+{
+    QRegion region;
+
+    if (m_qioswindow->isExposed()) {
+        QSize bounds = fromCGRect(self.layer.bounds).toRect().size();
+
+        Q_ASSERT(m_qioswindow->geometry().size() == bounds);
+        Q_ASSERT(self.hidden == !m_qioswindow->window()->isVisible());
+
+        region = QRect(QPoint(), bounds);
+    }
+
+    QWindowSystemInterface::handleExposeEvent(m_qioswindow->window(), region);
+    QWindowSystemInterface::flushWindowSystemEvents();
+}
+
+// -------------------------------------------------------------------------
+
+- (BOOL)canBecomeFirstResponder
+{
+    return YES;
+}
+
+- (BOOL)becomeFirstResponder
+{
+    if ([super becomeFirstResponder]) {
+        QWindowSystemInterface::handleWindowActivated(m_qioswindow->window());
+        QWindowSystemInterface::flushWindowSystemEvents();
+
+        return YES;
+    }
+
+    return NO;
+}
+
+- (BOOL)resignFirstResponder
+{
+    if ([super resignFirstResponder]) {
+        // We don't want to send window deactivation in case we're in the process
+        // of activating another window. The handleWindowActivated of the activation
+        // will take care of both.
+        dispatch_async(dispatch_get_main_queue (), ^{
+            if (![[UIResponder currentFirstResponder] isKindOfClass:[QUIView class]]) {
+                QWindowSystemInterface::handleWindowActivated(0);
+                QWindowSystemInterface::flushWindowSystemEvents();
+            }
+        });
+
+        return YES;
+    }
+
+    return NO;
+}
+
+// -------------------------------------------------------------------------
+
+
+- (void)updateTouchList:(NSSet *)touches withState:(Qt::TouchPointState)state
+{
+    foreach (UITouch *uiTouch, m_activeTouches.keys()) {
+        QWindowSystemInterface::TouchPoint &touchPoint = m_activeTouches[uiTouch];
+        if (![touches containsObject:uiTouch]) {
+            touchPoint.state = Qt::TouchPointStationary;
+        } else {
+            touchPoint.state = state;
+
+            // Touch positions are expected to be in QScreen global coordinates, and
+            // as we already have the QWindow positioned at the right place, we can
+            // just map from the local view position to global coordinates.
+            QPoint localViewPosition = fromCGPoint([uiTouch locationInView:self]).toPoint();
+            QPoint globalScreenPosition = m_qioswindow->mapToGlobal(localViewPosition);
+
+            touchPoint.area = QRectF(globalScreenPosition, QSize(0, 0));
+
+            // FIXME: Do we really need to support QTouchDevice::NormalizedPosition?
+            QSize screenSize = m_qioswindow->screen()->geometry().size();
+            touchPoint.normalPosition = QPointF(globalScreenPosition.x() / screenSize.width(),
+                                                globalScreenPosition.y() / screenSize.height());
+
+            // We don't claim that our touch device supports QTouchDevice::Pressure,
+            // but fill in a meaningfull value in case clients use it anyways.
+            touchPoint.pressure = (state == Qt::TouchPointReleased) ? 0.0 : 1.0;
+        }
+    }
+}
+
+- (void) sendTouchEventWithTimestamp:(ulong)timeStamp
+{
+    // Send touch event synchronously
+    QIOSIntegration *iosIntegration = QIOSIntegration::instance();
+    QWindowSystemInterface::handleTouchEvent(m_qioswindow->window(), timeStamp, iosIntegration->touchDevice(), m_activeTouches.values());
+    QWindowSystemInterface::flushWindowSystemEvents();
+}
+
+- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event
+{
+    // UIKit generates [Began -> Moved -> Ended] event sequences for
+    // each touch point. Internally we keep a hashmap of active UITouch
+    // points to QWindowSystemInterface::TouchPoints, and assigns each TouchPoint
+    // an id for use by Qt.
+    for (UITouch *touch in touches) {
+        Q_ASSERT(!m_activeTouches.contains(touch));
+        m_activeTouches[touch].id = m_nextTouchId++;
+    }
+
+    if (m_activeTouches.size() == 1) {
+        QPlatformWindow *topLevel = m_qioswindow;
+        while (QPlatformWindow *p = topLevel->parent())
+            topLevel = p;
+        if (topLevel->window() != QGuiApplication::focusWindow())
+            topLevel->requestActivateWindow();
+    }
+
+    [self updateTouchList:touches withState:Qt::TouchPointPressed];
+    [self sendTouchEventWithTimestamp:ulong(event.timestamp * 1000)];
+}
+
+- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event
+{
+    [self updateTouchList:touches withState:Qt::TouchPointMoved];
+    [self sendTouchEventWithTimestamp:ulong(event.timestamp * 1000)];
+}
+
+- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event
+{
+    [self updateTouchList:touches withState:Qt::TouchPointReleased];
+    [self sendTouchEventWithTimestamp:ulong(event.timestamp * 1000)];
+
+    // Remove ended touch points from the active set:
+    for (UITouch *touch in touches)
+        m_activeTouches.remove(touch);
+    if (m_activeTouches.isEmpty())
+        m_nextTouchId = 0;
+}
+
+- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event
+{
+    if (m_activeTouches.isEmpty())
+        return;
+
+    // When four-finger swiping, we get a touchesCancelled callback
+    // which includes all four touch points. The swipe gesture is
+    // then active until all four touches have been released, and
+    // we start getting touchesBegan events again.
+
+    // When five-finger pinching, we also get a touchesCancelled
+    // callback with all five touch points, but the pinch gesture
+    // ends when the second to last finger is released from the
+    // screen. The last finger will not emit any more touch
+    // events, _but_, will contribute to starting another pinch
+    // gesture. That second pinch gesture will _not_ trigger a
+    // touchesCancelled event when starting, but as each finger
+    // is released, and we may get touchesMoved events for the
+    // remaining fingers. [event allTouches] also contains one
+    // less touch point than it should, so this behavior is
+    // likely a bug in the iOS system gesture recognizer, but we
+    // have to take it into account when maintaining the Qt state.
+    // We do this by assuming that there are no cases where a
+    // sub-set of the active touch events are intentionally cancelled.
+
+    if (touches && (static_cast<NSInteger>([touches count]) != m_activeTouches.count()))
+        qWarning("Subset of active touches cancelled by UIKit");
+
+    m_activeTouches.clear();
+    m_nextTouchId = 0;
+
+    NSTimeInterval timestamp = event ? event.timestamp : [[NSProcessInfo processInfo] systemUptime];
+
+    // Send cancel touch event synchronously
+    QIOSIntegration *iosIntegration = static_cast<QIOSIntegration *>(QGuiApplicationPrivate::platformIntegration());
+    QWindowSystemInterface::handleTouchCancelEvent(m_qioswindow->window(), ulong(timestamp * 1000), iosIntegration->touchDevice());
+    QWindowSystemInterface::flushWindowSystemEvents();
+}
+
+- (id)targetForAction:(SEL)action withSender:(id)sender
+{
+    // Check first if QIOSMenu should handle the action before continuing up the responder chain
+    id target = [QIOSMenu::menuActionTarget() targetForAction:action withSender:sender];
+    return target ? target : [super targetForAction:action withSender:sender];
+}
+
+@end
+
+@implementation UIView (QtHelpers)
+
+- (QWindow *)qwindow
+{
+    if ([self isKindOfClass:[QUIView class]]) {
+        if (QIOSWindow *w = static_cast<QUIView *>(self)->m_qioswindow)
+            return w->window();
+    }
+    return nil;
+}
+
+- (UIViewController *)viewController
+{
+    id responder = self;
+    while ((responder = [responder nextResponder])) {
+        if ([responder isKindOfClass:UIViewController.class])
+            return responder;
+    }
+    return nil;
+}
+
+- (QIOSViewController*)qtViewController
+{
+    UIViewController *vc = self.viewController;
+    if ([vc isKindOfClass:QIOSViewController.class])
+        return static_cast<QIOSViewController *>(vc);
+
+    return nil;
+}
+
+@end
+
+// Include category as an alternative to using -ObjC (Apple QA1490)
+#include "quiview_accessibility.mm"
diff --git a/src/plugins/platforms/ios/quiview_accessibility.mm b/src/plugins/platforms/ios/quiview_accessibility.mm
new file mode 100644
index 0000000000..6565e08302
--- /dev/null
+++ b/src/plugins/platforms/ios/quiview_accessibility.mm
@@ -0,0 +1,117 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qiosplatformaccessibility.h"
+#include "quiaccessibilityelement.h"
+
+#include <QtGui/private/qguiapplication_p.h>
+
+@implementation QUIView (Accessibility)
+
+- (void)createAccessibleElement:(QAccessibleInterface *)iface
+{
+    if (!iface || iface->state().invisible)
+        return;
+    QAccessible::Id accessibleId = QAccessible::uniqueId(iface);
+    UIAccessibilityElement *elem = [[QMacAccessibilityElement alloc] initWithId: accessibleId withAccessibilityContainer: self];
+    [m_accessibleElements addObject: elem];
+}
+
+- (void)createAccessibleContainer:(QAccessibleInterface *)iface
+{
+    if (!iface)
+        return;
+
+    if (iface->childCount() == 0) {
+        [self createAccessibleElement: iface];
+    } else {
+        for (int i = 0; i < iface->childCount(); ++i)
+            [self createAccessibleContainer: iface->child(i)];
+    }
+}
+
+- (void)initAccessibility
+{
+    static bool init = false;
+    if (!init)
+        QGuiApplicationPrivate::platformIntegration()->accessibility()->setActive(true);
+    init = true;
+
+    if ([m_accessibleElements count])
+        return;
+
+    QWindow *win = m_qioswindow->window();
+    QAccessibleInterface *iface = win->accessibleRoot();
+    if (iface)
+        [self createAccessibleContainer: iface];
+}
+
+- (void)clearAccessibleCache
+{
+    [m_accessibleElements removeAllObjects];
+    UIAccessibilityPostNotification(UIAccessibilityScreenChangedNotification, @"");
+}
+
+// this is a container, returning yes here means the functions below will never be called
+- (BOOL)isAccessibilityElement
+{
+    return NO;
+}
+
+- (NSInteger)accessibilityElementCount
+{
+    [self initAccessibility];
+    return [m_accessibleElements count];
+}
+
+- (id)accessibilityElementAtIndex:(NSInteger)index
+{
+    [self initAccessibility];
+    return m_accessibleElements[index];
+}
+
+- (NSInteger)indexOfAccessibilityElement:(id)element
+{
+    [self initAccessibility];
+    return [m_accessibleElements indexOfObject:element];
+}
+
+@end
diff --git a/src/plugins/platforms/kms/main.cpp b/src/plugins/platforms/kms/main.cpp
index 3027e23c04..39ca77bd56 100644
--- a/src/plugins/platforms/kms/main.cpp
+++ b/src/plugins/platforms/kms/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/kms/qkmsbackingstore.cpp b/src/plugins/platforms/kms/qkmsbackingstore.cpp
index fa4ef847cd..ee79145671 100644
--- a/src/plugins/platforms/kms/qkmsbackingstore.cpp
+++ b/src/plugins/platforms/kms/qkmsbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,7 +49,6 @@ QKmsBackingStore::QKmsBackingStore(QWindow *window)
     m_context->setFormat(window->requestedFormat());
     m_context->setScreen(window->screen());
     m_context->create();
-    window->setSurfaceType(QSurface::OpenGLSurface);
 }
 
 QKmsBackingStore::~QKmsBackingStore()
@@ -203,6 +194,11 @@ void QKmsBackingStore::resize(const QSize &size, const QRegion &staticContents)
 
     m_context->makeCurrent(window());
 
+    if (!m_initialized) {
+        initializeOpenGLFunctions();
+        m_initialized = true;
+    }
+
     if (m_texture)
         glDeleteTextures(1, &m_texture);
 
diff --git a/src/plugins/platforms/kms/qkmsbackingstore.h b/src/plugins/platforms/kms/qkmsbackingstore.h
index c5f6c81d18..56d57313e8 100644
--- a/src/plugins/platforms/kms/qkmsbackingstore.h
+++ b/src/plugins/platforms/kms/qkmsbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,6 +56,8 @@ public:
     void flush(QWindow *window, const QRegion &region, const QPoint &offset);
     void resize(const QSize &size, const QRegion &staticContents);
 
+    QImage toImage() const Q_DECL_OVERRIDE { return m_image; }
+
 private:
     QOpenGLContext *m_context;
     QImage m_image;
diff --git a/src/plugins/platforms/kms/qkmscontext.cpp b/src/plugins/platforms/kms/qkmscontext.cpp
index e8d6c3545a..4b4505294c 100644
--- a/src/plugins/platforms/kms/qkmscontext.cpp
+++ b/src/plugins/platforms/kms/qkmscontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,19 +35,18 @@
 #include "qkmsdevice.h"
 #include "qkmscontext.h"
 #include "qkmswindow.h"
+#include "qkmsintegration.h"
 
-#include <QOpenGLContext>
-
+#include <QtGui/QOpenGLContext>
 #include <QtPlatformSupport/private/qeglconvenience_p.h>
 
 QT_BEGIN_NAMESPACE
 
 QKmsContext::QKmsContext(QOpenGLContext *context, QKmsDevice *device)
-    : QPlatformOpenGLContext()
-    , m_device(device)
+    : m_device(device)
 {
     EGLDisplay display = m_device->eglDisplay();
-    EGLConfig config = q_configFromGLFormat(display, QKmsScreen::tweakFormat(context->format()), true);
+    EGLConfig config = q_configFromGLFormat(display, QKmsScreen::tweakFormat(context->format()));
     m_format = q_glFormatFromConfig(display, config);
 
     //Initialize EGLContext
@@ -65,7 +56,12 @@ QKmsContext::QKmsContext(QOpenGLContext *context, QKmsDevice *device)
     };
 
     eglBindAPI(EGL_OPENGL_ES_API);
-    m_eglContext = eglCreateContext(display, config, 0, contextAttribs);
+
+    EGLContext share = EGL_NO_CONTEXT;
+    if (context->shareContext())
+        share = static_cast<QKmsContext *>(context->shareContext()->handle())->eglContext();
+
+    m_eglContext = eglCreateContext(display, config, share, contextAttribs);
     if (m_eglContext == EGL_NO_CONTEXT) {
         qWarning("QKmsContext::QKmsContext(): eglError: %x, this: %p",
                  eglGetError(), this);
@@ -80,16 +76,19 @@ bool QKmsContext::isValid() const
 
 bool QKmsContext::makeCurrent(QPlatformSurface *surface)
 {
-    Q_ASSERT(surface->surface()->surfaceType() == QSurface::OpenGLSurface);
+    Q_ASSERT(surface->surface()->supportsOpenGL());
 
     EGLDisplay display = m_device->eglDisplay();
-
-    QPlatformWindow *window = static_cast<QPlatformWindow *>(surface);
-    QKmsScreen *screen = static_cast<QKmsScreen *> (QPlatformScreen::platformScreenForWindow(window->window()));
-
-    EGLSurface eglSurface = screen->eglSurface();
-
-    screen->waitForPageFlipComplete();
+    EGLSurface eglSurface;
+
+    if (surface->surface()->surfaceClass() == QSurface::Window) {
+        QPlatformWindow *window = static_cast<QPlatformWindow *>(surface);
+        QKmsScreen *screen = static_cast<QKmsScreen *>(QPlatformScreen::platformScreenForWindow(window->window()));
+        eglSurface = screen->eglSurface();
+        screen->waitForPageFlipComplete();
+    } else {
+        eglSurface = static_cast<QKmsOffscreenWindow *>(surface)->surface();
+    }
 
     bool ok = eglMakeCurrent(display, eglSurface, eglSurface, m_eglContext);
     if (!ok)
diff --git a/src/plugins/platforms/kms/qkmscontext.h b/src/plugins/platforms/kms/qkmscontext.h
index ea6f2d6d82..b388dba7d5 100644
--- a/src/plugins/platforms/kms/qkmscontext.h
+++ b/src/plugins/platforms/kms/qkmscontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/kms/qkmscursor.cpp b/src/plugins/platforms/kms/qkmscursor.cpp
index da5dc9bb06..99af805bad 100644
--- a/src/plugins/platforms/kms/qkmscursor.cpp
+++ b/src/plugins/platforms/kms/qkmscursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,14 +37,29 @@
 
 QT_BEGIN_NAMESPACE
 
+#ifndef DRM_CAP_CURSOR_WIDTH
+#define DRM_CAP_CURSOR_WIDTH 0x8
+#endif
+
+#ifndef DRM_CAP_CURSOR_HEIGHT
+#define DRM_CAP_CURSOR_HEIGHT 0x9
+#endif
+
 QKmsCursor::QKmsCursor(QKmsScreen *screen)
     : m_screen(screen),
       m_graphicsBufferManager(screen->device()->gbmDevice()),
-      m_cursorBufferObject(gbm_bo_create(m_graphicsBufferManager, 64, 64, GBM_FORMAT_ARGB8888,
-                                         GBM_BO_USE_CURSOR_64X64|GBM_BO_USE_WRITE)),
       m_cursorImage(new QPlatformCursorImage(0, 0, 0, 0, 0, 0)),
-      m_moved(false)
+      m_moved(false),
+      m_cursorSize(64, 64)
 {
+    uint64_t value = 0;
+    if (!drmGetCap(m_screen->device()->fd(), DRM_CAP_CURSOR_WIDTH, &value))
+        m_cursorSize.setWidth(value);
+    if (!drmGetCap(m_screen->device()->fd(), DRM_CAP_CURSOR_HEIGHT, &value))
+        m_cursorSize.setHeight(value);
+
+    m_cursorBufferObject = gbm_bo_create(m_graphicsBufferManager, m_cursorSize.width(), m_cursorSize.height(),
+                                         GBM_FORMAT_ARGB8888, GBM_BO_USE_CURSOR_64X64 | GBM_BO_USE_WRITE);
 }
 
 QKmsCursor::~QKmsCursor()
@@ -89,16 +96,17 @@ void QKmsCursor::changeCursor(QCursor *windowCursor, QWindow *window)
                            windowCursor->hotSpot().y());
     }
 
-    if ((m_cursorImage->image()->width() > 64) || (m_cursorImage->image()->width() > 64))
-        qWarning("Warning: cursor larger than 64x64; only 64x64 pixels will be shown.");
+    if (m_cursorImage->image()->width() > m_cursorSize.width() || m_cursorImage->image()->width() > m_cursorSize.height())
+        qWarning("cursor larger than %dx%d, cursor truncated", m_cursorSize.width(), m_cursorSize.height());
 
-    QImage cursorImage = m_cursorImage->image()->
-            convertToFormat(QImage::Format_ARGB32).copy(0, 0, 64, 64);
+    QImage cursorImage = m_cursorImage->image()->convertToFormat(QImage::Format_ARGB32)
+        .copy(0, 0, m_cursorSize.width(), m_cursorSize.height());
     gbm_bo_write(m_cursorBufferObject, cursorImage.constBits(), cursorImage.byteCount());
 
     quint32 handle = gbm_bo_get_handle(m_cursorBufferObject).u32;
     int status = drmModeSetCursor(m_screen->device()->fd(),
-                                  m_screen->crtcId(), handle, 64, 64);
+                                  m_screen->crtcId(), handle,
+                                  m_cursorSize.width(), m_cursorSize.height());
 
     if (status) {
         qWarning("failed to set cursor: %d", status);
diff --git a/src/plugins/platforms/kms/qkmscursor.h b/src/plugins/platforms/kms/qkmscursor.h
index f972604c01..3eef4e599c 100644
--- a/src/plugins/platforms/kms/qkmscursor.h
+++ b/src/plugins/platforms/kms/qkmscursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,6 +58,7 @@ private:
     gbm_bo *m_cursorBufferObject;
     QPlatformCursorImage *m_cursorImage;
     bool m_moved;
+    QSize m_cursorSize;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/kms/qkmsdevice.cpp b/src/plugins/platforms/kms/qkmsdevice.cpp
index 8e669fe7d5..9c8b635d84 100644
--- a/src/plugins/platforms/kms/qkmsdevice.cpp
+++ b/src/plugins/platforms/kms/qkmsdevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/kms/qkmsdevice.h b/src/plugins/platforms/kms/qkmsdevice.h
index 2f8e2da709..e0a9ec9a16 100644
--- a/src/plugins/platforms/kms/qkmsdevice.h
+++ b/src/plugins/platforms/kms/qkmsdevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/kms/qkmsintegration.cpp b/src/plugins/platforms/kms/qkmsintegration.cpp
index 868886a0dd..d94d7d9aaa 100644
--- a/src/plugins/platforms/kms/qkmsintegration.cpp
+++ b/src/plugins/platforms/kms/qkmsintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,10 +48,13 @@
 #include <QtPlatformSupport/private/qgenericunixeventdispatcher_p.h>
 #include <QtPlatformSupport/private/qgenericunixfontdatabase_p.h>
 #include <QtPlatformSupport/private/qfbvthandler_p.h>
+#include <QtPlatformSupport/private/qeglconvenience_p.h>
 
 #include <QtGui/private/qguiapplication_p.h>
 #include <QtGui/QOpenGLContext>
 #include <QtGui/QScreen>
+#include <QtGui/QOffscreenSurface>
+#include <qpa/qplatformoffscreensurface.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -124,6 +119,7 @@ bool QKmsIntegration::hasCapability(QPlatformIntegration::Capability cap) const
     case ThreadedPixmaps: return true;
     case OpenGL: return true;
     case ThreadedOpenGL: return false;
+    case RasterGLSurface: return true;
     default: return QPlatformIntegration::hasCapability(cap);
     }
 }
@@ -146,6 +142,44 @@ QPlatformBackingStore *QKmsIntegration::createPlatformBackingStore(QWindow *wind
     return new QKmsBackingStore(window);
 }
 
+// Neither a pbuffer nor a hidden QWindow is suitable. Just use an additional, small gbm surface.
+QKmsOffscreenWindow::QKmsOffscreenWindow(EGLDisplay display, const QSurfaceFormat &format, QOffscreenSurface *offscreenSurface)
+    : QPlatformOffscreenSurface(offscreenSurface)
+    , m_format(format)
+    , m_display(display)
+    , m_surface(EGL_NO_SURFACE)
+    , m_window(0)
+{
+    QKmsScreen *screen = static_cast<QKmsScreen *>(offscreenSurface->screen()->handle());
+    m_window = gbm_surface_create(screen->device()->gbmDevice(),
+                                  10, 10,
+                                  GBM_FORMAT_XRGB8888,
+                                  GBM_BO_USE_RENDERING);
+    if (!m_window) {
+        qWarning("QKmsOffscreenWindow: Failed to create native window");
+        return;
+    }
+
+    EGLConfig config = q_configFromGLFormat(m_display, m_format);
+    m_surface = eglCreateWindowSurface(m_display, config, m_window, 0);
+    if (m_surface != EGL_NO_SURFACE)
+        m_format = q_glFormatFromConfig(m_display, config);
+}
+
+QKmsOffscreenWindow::~QKmsOffscreenWindow()
+{
+    if (m_surface != EGL_NO_SURFACE)
+        eglDestroySurface(m_display, m_surface);
+    if (m_window)
+        gbm_surface_destroy((gbm_surface *) m_window);
+}
+
+QPlatformOffscreenSurface *QKmsIntegration::createPlatformOffscreenSurface(QOffscreenSurface *surface) const
+{
+    QKmsScreen *screen = static_cast<QKmsScreen *>(surface->screen()->handle());
+    return new QKmsOffscreenWindow(screen->device()->eglDisplay(), QKmsScreen::tweakFormat(surface->format()), surface);
+}
+
 QPlatformFontDatabase *QKmsIntegration::fontDatabase() const
 {
     return m_fontDatabase;
diff --git a/src/plugins/platforms/kms/qkmsintegration.h b/src/plugins/platforms/kms/qkmsintegration.h
index 3d3f1722e9..3ca2510e68 100644
--- a/src/plugins/platforms/kms/qkmsintegration.h
+++ b/src/plugins/platforms/kms/qkmsintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,7 +36,9 @@
 
 #include <qpa/qplatformintegration.h>
 #include <qpa/qplatformnativeinterface.h>
+#include <qpa/qplatformoffscreensurface.h>
 #include <QtPlatformSupport/private/qdevicediscovery_p.h>
+#include <EGL/egl.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -52,6 +46,24 @@ class QKmsScreen;
 class QKmsDevice;
 class QFbVtHandler;
 
+class QKmsOffscreenWindow : public QPlatformOffscreenSurface
+{
+public:
+    QKmsOffscreenWindow(EGLDisplay display, const QSurfaceFormat &format, QOffscreenSurface *offscreenSurface);
+    ~QKmsOffscreenWindow();
+
+    QSurfaceFormat format() const Q_DECL_OVERRIDE { return m_format; }
+    bool isValid() const Q_DECL_OVERRIDE { return m_surface != EGL_NO_SURFACE; }
+
+    EGLSurface surface() const { return m_surface; }
+
+private:
+    QSurfaceFormat m_format;
+    EGLDisplay m_display;
+    EGLSurface m_surface;
+    EGLNativeWindowType m_window;
+};
+
 class QKmsIntegration : public QObject, public QPlatformIntegration
 {
     Q_OBJECT
@@ -66,6 +78,7 @@ public:
     QPlatformOpenGLContext *createPlatformOpenGLContext(QOpenGLContext *context) const Q_DECL_OVERRIDE;
     QPlatformWindow *createPlatformWindow(QWindow *window) const Q_DECL_OVERRIDE;
     QPlatformBackingStore *createPlatformBackingStore(QWindow *window) const Q_DECL_OVERRIDE;
+    QPlatformOffscreenSurface *createPlatformOffscreenSurface(QOffscreenSurface *surface) const Q_DECL_OVERRIDE;
 
     QPlatformFontDatabase *fontDatabase() const Q_DECL_OVERRIDE;
     QAbstractEventDispatcher *createEventDispatcher() const Q_DECL_OVERRIDE;
diff --git a/src/plugins/platforms/kms/qkmsnativeinterface.cpp b/src/plugins/platforms/kms/qkmsnativeinterface.cpp
index debb5bb180..3ed1643fdb 100644
--- a/src/plugins/platforms/kms/qkmsnativeinterface.cpp
+++ b/src/plugins/platforms/kms/qkmsnativeinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/kms/qkmsnativeinterface.h b/src/plugins/platforms/kms/qkmsnativeinterface.h
index 2b2b9ac5f7..b9ef914045 100644
--- a/src/plugins/platforms/kms/qkmsnativeinterface.h
+++ b/src/plugins/platforms/kms/qkmsnativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/kms/qkmsscreen.cpp b/src/plugins/platforms/kms/qkmsscreen.cpp
index a930aa6545..ddcdd10928 100644
--- a/src/plugins/platforms/kms/qkmsscreen.cpp
+++ b/src/plugins/platforms/kms/qkmsscreen.cpp
@@ -1,44 +1,35 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
-//#include <QDebug>
 
 #include "qkmsscreen.h"
 #include "qkmscursor.h"
@@ -52,6 +43,8 @@
 
 QT_BEGIN_NAMESPACE
 
+Q_LOGGING_CATEGORY(lcQpaScreen, "qt.qpa.kms.screen")
+
 //Fallback mode (taken from Wayland DRM demo compositor)
 static drmModeModeInfo builtin_1024x768 = {
     63500, //clock
@@ -148,7 +141,7 @@ void QKmsScreen::initializeScreenMode(const drmModeRes *resources, const drmMode
     m_crtcId = resources->crtcs[i];
     m_mode = *mode;
     m_geometry = QRect(0, 0, m_mode.hdisplay, m_mode.vdisplay);
-    qDebug() << "kms initialized with geometry" << m_geometry;
+    qCDebug(lcQpaScreen) << "kms initialized with geometry" << m_geometry;
     m_depth = 32;
     m_format = QImage::Format_RGB32;
     m_physicalSize = QSizeF(connector->mmWidth, connector->mmHeight);
@@ -158,7 +151,7 @@ void QKmsScreen::initializeScreenMode(const drmModeRes *resources, const drmMode
                                       GBM_BO_FORMAT_XRGB8888,
                                       GBM_BO_USE_SCANOUT | GBM_BO_USE_RENDERING);
 
-    qDebug() << "created gbm surface" << m_gbmSurface << m_mode.hdisplay << m_mode.vdisplay;
+    qCDebug(lcQpaScreen) << "created gbm surface" << m_gbmSurface << m_mode.hdisplay << m_mode.vdisplay;
     //Cleanup
     drmModeFreeEncoder(encoder);
 }
@@ -177,10 +170,11 @@ QSurfaceFormat QKmsScreen::tweakFormat(const QSurfaceFormat &format)
 void QKmsScreen::initializeWithFormat(const QSurfaceFormat &format)
 {
     EGLDisplay display = m_device->eglDisplay();
-    EGLConfig config = q_configFromGLFormat(display, tweakFormat(format), true);
+    EGLConfig config = q_configFromGLFormat(display, tweakFormat(format));
 
     m_eglWindowSurface = eglCreateWindowSurface(display, config, (EGLNativeWindowType)m_gbmSurface, NULL);
-    qDebug() << "created window surface";
+    qCDebug(lcQpaScreen) << "created window surface";
+    m_surfaceFormat = q_glFormatFromConfig(display, config);
 }
 
 void QKmsScreen::swapBuffers()
diff --git a/src/plugins/platforms/kms/qkmsscreen.h b/src/plugins/platforms/kms/qkmsscreen.h
index 1fa8dbb763..552541503c 100644
--- a/src/plugins/platforms/kms/qkmsscreen.h
+++ b/src/plugins/platforms/kms/qkmsscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,11 +48,15 @@ extern "C" {
 #include <EGL/egl.h>
 #include <EGL/eglext.h>
 #include <QtGui/qopengl.h>
+#include <QtGui/qsurfaceformat.h>
+#include <QtCore/qloggingcategory.h>
 
 #include <qpa/qplatformscreen.h>
 
 QT_BEGIN_NAMESPACE
 
+Q_DECLARE_LOGGING_CATEGORY(lcQpaScreen)
+
 class QKmsCursor;
 class QKmsDevice;
 class QKmsContext;
@@ -92,6 +88,8 @@ public:
 
     static QSurfaceFormat tweakFormat(const QSurfaceFormat &format);
 
+    QSurfaceFormat surfaceFormat() const { return m_surfaceFormat; }
+
 private:
     void performPageFlip();
     void initializeScreenMode(const drmModeRes *resources, const drmModeConnector *connector);
@@ -116,6 +114,7 @@ private:
     EGLSurface m_eglWindowSurface;
 
     bool m_modeSet;
+    QSurfaceFormat m_surfaceFormat;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/kms/qkmswindow.cpp b/src/plugins/platforms/kms/qkmswindow.cpp
index 2b1fae3120..bc803d0dbb 100644
--- a/src/plugins/platforms/kms/qkmswindow.cpp
+++ b/src/plugins/platforms/kms/qkmswindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,4 +58,9 @@ void QKmsWindow::setGeometry(const QRect &rect)
     QPlatformWindow::setGeometry(fullscreenRect);
 }
 
+QSurfaceFormat QKmsWindow::format() const
+{
+    return static_cast<QKmsScreen *>(m_screen)->surfaceFormat();
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/kms/qkmswindow.h b/src/plugins/platforms/kms/qkmswindow.h
index c07ee9cf23..ca7eb209db 100644
--- a/src/plugins/platforms/kms/qkmswindow.h
+++ b/src/plugins/platforms/kms/qkmswindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,7 +45,8 @@ class QKmsWindow : public QPlatformWindow
 public:
     QKmsWindow(QWindow *window);
 
-    void setGeometry(const QRect &rect);
+    void setGeometry(const QRect &rect) Q_DECL_OVERRIDE;
+    QSurfaceFormat format() const Q_DECL_OVERRIDE;
 
 private:
     QPlatformScreen *m_screen;
diff --git a/src/plugins/platforms/linuxfb/main.cpp b/src/plugins/platforms/linuxfb/main.cpp
index 27aa91aefe..14cd3611d9 100644
--- a/src/plugins/platforms/linuxfb/main.cpp
+++ b/src/plugins/platforms/linuxfb/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/linuxfb/qlinuxfbintegration.cpp b/src/plugins/platforms/linuxfb/qlinuxfbintegration.cpp
index b1b13e862f..cb870847f2 100644
--- a/src/plugins/platforms/linuxfb/qlinuxfbintegration.cpp
+++ b/src/plugins/platforms/linuxfb/qlinuxfbintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/linuxfb/qlinuxfbintegration.h b/src/plugins/platforms/linuxfb/qlinuxfbintegration.h
index 67742ecab9..cabd943921 100644
--- a/src/plugins/platforms/linuxfb/qlinuxfbintegration.h
+++ b/src/plugins/platforms/linuxfb/qlinuxfbintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/linuxfb/qlinuxfbscreen.cpp b/src/plugins/platforms/linuxfb/qlinuxfbscreen.cpp
index 72d5833e73..a66c9fa252 100644
--- a/src/plugins/platforms/linuxfb/qlinuxfbscreen.cpp
+++ b/src/plugins/platforms/linuxfb/qlinuxfbscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/linuxfb/qlinuxfbscreen.h b/src/plugins/platforms/linuxfb/qlinuxfbscreen.h
index 32cd263063..1997d46ad1 100644
--- a/src/plugins/platforms/linuxfb/qlinuxfbscreen.h
+++ b/src/plugins/platforms/linuxfb/qlinuxfbscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimal/main.cpp b/src/plugins/platforms/minimal/main.cpp
index 5e0388a0af..191de630b2 100644
--- a/src/plugins/platforms/minimal/main.cpp
+++ b/src/plugins/platforms/minimal/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimal/qminimalbackingstore.cpp b/src/plugins/platforms/minimal/qminimalbackingstore.cpp
index f58458cd31..f9b870ef1e 100644
--- a/src/plugins/platforms/minimal/qminimalbackingstore.cpp
+++ b/src/plugins/platforms/minimal/qminimalbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimal/qminimalbackingstore.h b/src/plugins/platforms/minimal/qminimalbackingstore.h
index 9265a09d18..d356153b62 100644
--- a/src/plugins/platforms/minimal/qminimalbackingstore.h
+++ b/src/plugins/platforms/minimal/qminimalbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimal/qminimalintegration.cpp b/src/plugins/platforms/minimal/qminimalintegration.cpp
index 7f5c25f239..252f842df4 100644
--- a/src/plugins/platforms/minimal/qminimalintegration.cpp
+++ b/src/plugins/platforms/minimal/qminimalintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimal/qminimalintegration.h b/src/plugins/platforms/minimal/qminimalintegration.h
index a737057085..d9392df510 100644
--- a/src/plugins/platforms/minimal/qminimalintegration.h
+++ b/src/plugins/platforms/minimal/qminimalintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/main.cpp b/src/plugins/platforms/minimalegl/main.cpp
index ce8838ced0..de130ae2ff 100644
--- a/src/plugins/platforms/minimalegl/main.cpp
+++ b/src/plugins/platforms/minimalegl/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglbackingstore.cpp b/src/plugins/platforms/minimalegl/qminimaleglbackingstore.cpp
index db6e5d94da..9dff1972aa 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglbackingstore.cpp
+++ b/src/plugins/platforms/minimalegl/qminimaleglbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglbackingstore.h b/src/plugins/platforms/minimalegl/qminimaleglbackingstore.h
index 8c88f0b222..617ab9a1b9 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglbackingstore.h
+++ b/src/plugins/platforms/minimalegl/qminimaleglbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglintegration.cpp b/src/plugins/platforms/minimalegl/qminimaleglintegration.cpp
index 21c23250e4..0b12e62cc1 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglintegration.cpp
+++ b/src/plugins/platforms/minimalegl/qminimaleglintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglintegration.h b/src/plugins/platforms/minimalegl/qminimaleglintegration.h
index 58b8f28ac9..5c42184926 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglintegration.h
+++ b/src/plugins/platforms/minimalegl/qminimaleglintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglscreen.cpp b/src/plugins/platforms/minimalegl/qminimaleglscreen.cpp
index 578031807c..a0ebffa806 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglscreen.cpp
+++ b/src/plugins/platforms/minimalegl/qminimaleglscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglscreen.h b/src/plugins/platforms/minimalegl/qminimaleglscreen.h
index ac73400cdd..9e5dc90971 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglscreen.h
+++ b/src/plugins/platforms/minimalegl/qminimaleglscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglwindow.cpp b/src/plugins/platforms/minimalegl/qminimaleglwindow.cpp
index 956b5470e5..906a1308da 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglwindow.cpp
+++ b/src/plugins/platforms/minimalegl/qminimaleglwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/minimalegl/qminimaleglwindow.h b/src/plugins/platforms/minimalegl/qminimaleglwindow.h
index 2ba6539d31..5c3006663f 100644
--- a/src/plugins/platforms/minimalegl/qminimaleglwindow.h
+++ b/src/plugins/platforms/minimalegl/qminimaleglwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/main.cpp b/src/plugins/platforms/offscreen/main.cpp
index e89116351b..98b8e2ba95 100644
--- a/src/plugins/platforms/offscreen/main.cpp
+++ b/src/plugins/platforms/offscreen/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreencommon.cpp b/src/plugins/platforms/offscreen/qoffscreencommon.cpp
index 069b20693d..50c9a85fcf 100644
--- a/src/plugins/platforms/offscreen/qoffscreencommon.cpp
+++ b/src/plugins/platforms/offscreen/qoffscreencommon.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreencommon.h b/src/plugins/platforms/offscreen/qoffscreencommon.h
index 28546aed88..88615d2da4 100644
--- a/src/plugins/platforms/offscreen/qoffscreencommon.h
+++ b/src/plugins/platforms/offscreen/qoffscreencommon.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreenintegration.cpp b/src/plugins/platforms/offscreen/qoffscreenintegration.cpp
index 76881db6fc..e8ad109f71 100644
--- a/src/plugins/platforms/offscreen/qoffscreenintegration.cpp
+++ b/src/plugins/platforms/offscreen/qoffscreenintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreenintegration.h b/src/plugins/platforms/offscreen/qoffscreenintegration.h
index c7cdb5fdd6..714c5eb081 100644
--- a/src/plugins/platforms/offscreen/qoffscreenintegration.h
+++ b/src/plugins/platforms/offscreen/qoffscreenintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreenintegration_dummy.cpp b/src/plugins/platforms/offscreen/qoffscreenintegration_dummy.cpp
index 8bc1b17a56..b55444219a 100644
--- a/src/plugins/platforms/offscreen/qoffscreenintegration_dummy.cpp
+++ b/src/plugins/platforms/offscreen/qoffscreenintegration_dummy.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreenintegration_x11.cpp b/src/plugins/platforms/offscreen/qoffscreenintegration_x11.cpp
index 6c6c516a4e..08913aeed9 100644
--- a/src/plugins/platforms/offscreen/qoffscreenintegration_x11.cpp
+++ b/src/plugins/platforms/offscreen/qoffscreenintegration_x11.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -179,7 +171,7 @@ QOffscreenX11GLXContext::QOffscreenX11GLXContext(QOffscreenX11Info *x11, QOpenGL
 
         // Get the basic surface format details
         if (d->context)
-            qglx_surfaceFormatFromGLXFBConfig(&d->format, x11->display(), config, d->context);
+            qglx_surfaceFormatFromGLXFBConfig(&d->format, x11->display(), config);
 
         // Create a temporary window so that we can make the new context current
         d->window = createDummyWindow(x11, config);
diff --git a/src/plugins/platforms/offscreen/qoffscreenintegration_x11.h b/src/plugins/platforms/offscreen/qoffscreenintegration_x11.h
index 9afa302b04..c50e812777 100644
--- a/src/plugins/platforms/offscreen/qoffscreenintegration_x11.h
+++ b/src/plugins/platforms/offscreen/qoffscreenintegration_x11.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreenwindow.cpp b/src/plugins/platforms/offscreen/qoffscreenwindow.cpp
index 702ef2300c..e83ff9b133 100644
--- a/src/plugins/platforms/offscreen/qoffscreenwindow.cpp
+++ b/src/plugins/platforms/offscreen/qoffscreenwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/offscreen/qoffscreenwindow.h b/src/plugins/platforms/offscreen/qoffscreenwindow.h
index cd1cf8e0aa..d168d28ee8 100644
--- a/src/plugins/platforms/offscreen/qoffscreenwindow.h
+++ b/src/plugins/platforms/offscreen/qoffscreenwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/main.cpp b/src/plugins/platforms/openwfd/main.cpp
index 5f5d7594cd..5ddf26f65c 100644
--- a/src/plugins/platforms/openwfd/main.cpp
+++ b/src/plugins/platforms/openwfd/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdbackingstore.cpp b/src/plugins/platforms/openwfd/qopenwfdbackingstore.cpp
index a40085471f..0c2af13307 100644
--- a/src/plugins/platforms/openwfd/qopenwfdbackingstore.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdbackingstore.h b/src/plugins/platforms/openwfd/qopenwfdbackingstore.h
index 5e40492922..7a801b39ce 100644
--- a/src/plugins/platforms/openwfd/qopenwfdbackingstore.h
+++ b/src/plugins/platforms/openwfd/qopenwfdbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfddevice.cpp b/src/plugins/platforms/openwfd/qopenwfddevice.cpp
index 4b136b6464..a6bd37966d 100644
--- a/src/plugins/platforms/openwfd/qopenwfddevice.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfddevice.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfddevice.h b/src/plugins/platforms/openwfd/qopenwfddevice.h
index afd3bd0c3b..c0b2bdd234 100644
--- a/src/plugins/platforms/openwfd/qopenwfddevice.h
+++ b/src/plugins/platforms/openwfd/qopenwfddevice.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdevent.cpp b/src/plugins/platforms/openwfd/qopenwfdevent.cpp
index 0779142e19..30419359b8 100644
--- a/src/plugins/platforms/openwfd/qopenwfdevent.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdevent.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdevent.h b/src/plugins/platforms/openwfd/qopenwfdevent.h
index a485adc233..9127fdd5de 100644
--- a/src/plugins/platforms/openwfd/qopenwfdevent.h
+++ b/src/plugins/platforms/openwfd/qopenwfdevent.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdglcontext.cpp b/src/plugins/platforms/openwfd/qopenwfdglcontext.cpp
index b491b79efa..968e65aa84 100644
--- a/src/plugins/platforms/openwfd/qopenwfdglcontext.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdglcontext.h b/src/plugins/platforms/openwfd/qopenwfdglcontext.h
index 78d2a891b8..2ee2d04939 100644
--- a/src/plugins/platforms/openwfd/qopenwfdglcontext.h
+++ b/src/plugins/platforms/openwfd/qopenwfdglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdintegration.cpp b/src/plugins/platforms/openwfd/qopenwfdintegration.cpp
index 382ce82dc9..1e29fcc9b1 100644
--- a/src/plugins/platforms/openwfd/qopenwfdintegration.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdintegration.h b/src/plugins/platforms/openwfd/qopenwfdintegration.h
index 9af91deeac..6c086b73be 100644
--- a/src/plugins/platforms/openwfd/qopenwfdintegration.h
+++ b/src/plugins/platforms/openwfd/qopenwfdintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdnativeinterface.cpp b/src/plugins/platforms/openwfd/qopenwfdnativeinterface.cpp
index 2470010eb1..b3a074a2d8 100644
--- a/src/plugins/platforms/openwfd/qopenwfdnativeinterface.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdnativeinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdnativeinterface.h b/src/plugins/platforms/openwfd/qopenwfdnativeinterface.h
index 8d1e8ef4bd..30a2b09c02 100644
--- a/src/plugins/platforms/openwfd/qopenwfdnativeinterface.h
+++ b/src/plugins/platforms/openwfd/qopenwfdnativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.cpp b/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.cpp
index 4a9f4c4174..3cd9c18fee 100644
--- a/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.h b/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.h
index 807cb89ec3..0858a11272 100644
--- a/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.h
+++ b/src/plugins/platforms/openwfd/qopenwfdoutputbuffer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdport.cpp b/src/plugins/platforms/openwfd/qopenwfdport.cpp
index 14b499f7cf..0bdc6b2d4b 100644
--- a/src/plugins/platforms/openwfd/qopenwfdport.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdport.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdport.h b/src/plugins/platforms/openwfd/qopenwfdport.h
index 32630cbf8a..bb67909c80 100644
--- a/src/plugins/platforms/openwfd/qopenwfdport.h
+++ b/src/plugins/platforms/openwfd/qopenwfdport.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdportmode.cpp b/src/plugins/platforms/openwfd/qopenwfdportmode.cpp
index d11a34302d..1f1bafed96 100644
--- a/src/plugins/platforms/openwfd/qopenwfdportmode.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdportmode.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdportmode.h b/src/plugins/platforms/openwfd/qopenwfdportmode.h
index 47c7514dc5..303cbaec65 100644
--- a/src/plugins/platforms/openwfd/qopenwfdportmode.h
+++ b/src/plugins/platforms/openwfd/qopenwfdportmode.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdscreen.cpp b/src/plugins/platforms/openwfd/qopenwfdscreen.cpp
index 9211cb4b25..9b8e88e58f 100644
--- a/src/plugins/platforms/openwfd/qopenwfdscreen.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdscreen.h b/src/plugins/platforms/openwfd/qopenwfdscreen.h
index 71da2b849e..686cab8ee7 100644
--- a/src/plugins/platforms/openwfd/qopenwfdscreen.h
+++ b/src/plugins/platforms/openwfd/qopenwfdscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdwindow.cpp b/src/plugins/platforms/openwfd/qopenwfdwindow.cpp
index 497d5e1bdf..7051397191 100644
--- a/src/plugins/platforms/openwfd/qopenwfdwindow.cpp
+++ b/src/plugins/platforms/openwfd/qopenwfdwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/openwfd/qopenwfdwindow.h b/src/plugins/platforms/openwfd/qopenwfdwindow.h
index 9f03b27ea4..b801a4a36c 100644
--- a/src/plugins/platforms/openwfd/qopenwfdwindow.h
+++ b/src/plugins/platforms/openwfd/qopenwfdwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/platforms.pro b/src/plugins/platforms/platforms.pro
index 584efa1665..69f6f308b5 100644
--- a/src/plugins/platforms/platforms.pro
+++ b/src/plugins/platforms/platforms.pro
@@ -35,7 +35,7 @@ contains(QT_CONFIG, directfb) {
     SUBDIRS += directfb
 }
 
-contains(QT_CONFIG, kms) {
+contains(QT_CONFIG, kms):contains(QT_CONFIG, opengl) {
     SUBDIRS += kms
 }
 
diff --git a/src/plugins/platforms/qnx/main.cpp b/src/plugins/platforms/qnx/main.cpp
index 01e71b3810..a9ec99b1bd 100644
--- a/src/plugins/platforms/qnx/main.cpp
+++ b/src/plugins/platforms/qnx/main.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/main.h b/src/plugins/platforms/qnx/main.h
index 683b20efd2..dc1bdcc618 100644
--- a/src/plugins/platforms/qnx/main.h
+++ b/src/plugins/platforms/qnx/main.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qblackberrytheme.cpp b/src/plugins/platforms/qnx/qblackberrytheme.cpp
index 46ab4d7033..71cbb313e2 100644
--- a/src/plugins/platforms/qnx/qblackberrytheme.cpp
+++ b/src/plugins/platforms/qnx/qblackberrytheme.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qblackberrytheme.h b/src/plugins/platforms/qnx/qblackberrytheme.h
index 29fa0b8f61..5e7f59756b 100644
--- a/src/plugins/platforms/qnx/qblackberrytheme.h
+++ b/src/plugins/platforms/qnx/qblackberrytheme.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxabstractcover.h b/src/plugins/platforms/qnx/qqnxabstractcover.h
index 84139b6db0..9d36df2107 100644
--- a/src/plugins/platforms/qnx/qqnxabstractcover.h
+++ b/src/plugins/platforms/qnx/qqnxabstractcover.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxabstractnavigator.cpp b/src/plugins/platforms/qnx/qqnxabstractnavigator.cpp
index 5a94bff14e..295d178855 100644
--- a/src/plugins/platforms/qnx/qqnxabstractnavigator.cpp
+++ b/src/plugins/platforms/qnx/qqnxabstractnavigator.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxabstractnavigator.h b/src/plugins/platforms/qnx/qqnxabstractnavigator.h
index 912c8e451d..34e11dbfc0 100644
--- a/src/plugins/platforms/qnx/qqnxabstractnavigator.h
+++ b/src/plugins/platforms/qnx/qqnxabstractnavigator.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.cpp b/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.cpp
index 800cb96bdf..6395abf443 100644
--- a/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.cpp
+++ b/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.h b/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.h
index bff8c56835..9efd6774ed 100644
--- a/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.h
+++ b/src/plugins/platforms/qnx/qqnxabstractvirtualkeyboard.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxbpseventfilter.cpp b/src/plugins/platforms/qnx/qqnxbpseventfilter.cpp
index 4c36a97ab6..b308ee13c7 100644
--- a/src/plugins/platforms/qnx/qqnxbpseventfilter.cpp
+++ b/src/plugins/platforms/qnx/qqnxbpseventfilter.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxbpseventfilter.h b/src/plugins/platforms/qnx/qqnxbpseventfilter.h
index f8e36823d5..1836c38623 100644
--- a/src/plugins/platforms/qnx/qqnxbpseventfilter.h
+++ b/src/plugins/platforms/qnx/qqnxbpseventfilter.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxbuffer.cpp b/src/plugins/platforms/qnx/qqnxbuffer.cpp
index e9afd5232b..086222ab7a 100644
--- a/src/plugins/platforms/qnx/qqnxbuffer.cpp
+++ b/src/plugins/platforms/qnx/qqnxbuffer.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxbuffer.h b/src/plugins/platforms/qnx/qqnxbuffer.h
index d5adeb8d8b..9fc508abb0 100644
--- a/src/plugins/platforms/qnx/qqnxbuffer.h
+++ b/src/plugins/platforms/qnx/qqnxbuffer.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.cpp b/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.cpp
index d3f843ac39..bd5c3d51d2 100644
--- a/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.cpp
+++ b/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.h b/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.h
index 96f9eb02fc..d10c7c50da 100644
--- a/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.h
+++ b/src/plugins/platforms/qnx/qqnxbuttoneventnotifier.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxclipboard.cpp b/src/plugins/platforms/qnx/qqnxclipboard.cpp
index dfd1345eed..e1a52ef251 100644
--- a/src/plugins/platforms/qnx/qqnxclipboard.cpp
+++ b/src/plugins/platforms/qnx/qqnxclipboard.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxclipboard.h b/src/plugins/platforms/qnx/qqnxclipboard.h
index 561b57299e..889ec1c69a 100644
--- a/src/plugins/platforms/qnx/qqnxclipboard.h
+++ b/src/plugins/platforms/qnx/qqnxclipboard.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxcursor.cpp b/src/plugins/platforms/qnx/qqnxcursor.cpp
index 3cf857bb27..4ddc7a1256 100644
--- a/src/plugins/platforms/qnx/qqnxcursor.cpp
+++ b/src/plugins/platforms/qnx/qqnxcursor.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxcursor.h b/src/plugins/platforms/qnx/qqnxcursor.h
index b62c299040..8a9cdb8779 100644
--- a/src/plugins/platforms/qnx/qqnxcursor.h
+++ b/src/plugins/platforms/qnx/qqnxcursor.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxeglwindow.cpp b/src/plugins/platforms/qnx/qqnxeglwindow.cpp
index 9d40d166af..9bd8255b48 100644
--- a/src/plugins/platforms/qnx/qqnxeglwindow.cpp
+++ b/src/plugins/platforms/qnx/qqnxeglwindow.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxeglwindow.h b/src/plugins/platforms/qnx/qqnxeglwindow.h
index cd98f9369d..fb236ea38d 100644
--- a/src/plugins/platforms/qnx/qqnxeglwindow.h
+++ b/src/plugins/platforms/qnx/qqnxeglwindow.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.cpp b/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.cpp
index 42fd0ed8bf..92835058d6 100644
--- a/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.cpp
+++ b/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.h b/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.h
index 90bd4d675a..7fc96e5685 100644
--- a/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.h
+++ b/src/plugins/platforms/qnx/qqnxeventdispatcher_blackberry.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxfiledialoghelper.h b/src/plugins/platforms/qnx/qqnxfiledialoghelper.h
index 83af966a00..8d6b03358e 100644
--- a/src/plugins/platforms/qnx/qqnxfiledialoghelper.h
+++ b/src/plugins/platforms/qnx/qqnxfiledialoghelper.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxfiledialoghelper_bb10.cpp b/src/plugins/platforms/qnx/qqnxfiledialoghelper_bb10.cpp
index fa6e26977a..6844176b8a 100644
--- a/src/plugins/platforms/qnx/qqnxfiledialoghelper_bb10.cpp
+++ b/src/plugins/platforms/qnx/qqnxfiledialoghelper_bb10.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxfiledialoghelper_playbook.cpp b/src/plugins/platforms/qnx/qqnxfiledialoghelper_playbook.cpp
index 2a743d03f7..2b4ec7828b 100644
--- a/src/plugins/platforms/qnx/qqnxfiledialoghelper_playbook.cpp
+++ b/src/plugins/platforms/qnx/qqnxfiledialoghelper_playbook.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxfilepicker.cpp b/src/plugins/platforms/qnx/qqnxfilepicker.cpp
index 08119ce0ae..9362f9cd0b 100644
--- a/src/plugins/platforms/qnx/qqnxfilepicker.cpp
+++ b/src/plugins/platforms/qnx/qqnxfilepicker.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxfilepicker.h b/src/plugins/platforms/qnx/qqnxfilepicker.h
index e8272900b0..82df1ea32d 100644
--- a/src/plugins/platforms/qnx/qqnxfilepicker.h
+++ b/src/plugins/platforms/qnx/qqnxfilepicker.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxglcontext.cpp b/src/plugins/platforms/qnx/qqnxglcontext.cpp
index 23db7f09f3..09736304e1 100644
--- a/src/plugins/platforms/qnx/qqnxglcontext.cpp
+++ b/src/plugins/platforms/qnx/qqnxglcontext.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxglcontext.h b/src/plugins/platforms/qnx/qqnxglcontext.h
index d12de7342b..090c7ed49d 100644
--- a/src/plugins/platforms/qnx/qqnxglcontext.h
+++ b/src/plugins/platforms/qnx/qqnxglcontext.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxglobal.cpp b/src/plugins/platforms/qnx/qqnxglobal.cpp
index cef37af84e..961fc276ae 100644
--- a/src/plugins/platforms/qnx/qqnxglobal.cpp
+++ b/src/plugins/platforms/qnx/qqnxglobal.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxglobal.h b/src/plugins/platforms/qnx/qqnxglobal.h
index 8cfbfb084a..441179d544 100644
--- a/src/plugins/platforms/qnx/qqnxglobal.h
+++ b/src/plugins/platforms/qnx/qqnxglobal.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxinputcontext_imf.cpp b/src/plugins/platforms/qnx/qqnxinputcontext_imf.cpp
index 619883e843..9a48fbc0f7 100644
--- a/src/plugins/platforms/qnx/qqnxinputcontext_imf.cpp
+++ b/src/plugins/platforms/qnx/qqnxinputcontext_imf.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxinputcontext_imf.h b/src/plugins/platforms/qnx/qqnxinputcontext_imf.h
index 5028215bbe..c0f66514f1 100644
--- a/src/plugins/platforms/qnx/qqnxinputcontext_imf.h
+++ b/src/plugins/platforms/qnx/qqnxinputcontext_imf.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxinputcontext_noimf.cpp b/src/plugins/platforms/qnx/qqnxinputcontext_noimf.cpp
index 9270f1ed6b..d0744ffa69 100644
--- a/src/plugins/platforms/qnx/qqnxinputcontext_noimf.cpp
+++ b/src/plugins/platforms/qnx/qqnxinputcontext_noimf.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxinputcontext_noimf.h b/src/plugins/platforms/qnx/qqnxinputcontext_noimf.h
index 1ecf7cc94e..854db1b139 100644
--- a/src/plugins/platforms/qnx/qqnxinputcontext_noimf.h
+++ b/src/plugins/platforms/qnx/qqnxinputcontext_noimf.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxintegration.cpp b/src/plugins/platforms/qnx/qqnxintegration.cpp
index 1110eb5f28..34b79b61da 100644
--- a/src/plugins/platforms/qnx/qqnxintegration.cpp
+++ b/src/plugins/platforms/qnx/qqnxintegration.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxintegration.h b/src/plugins/platforms/qnx/qqnxintegration.h
index 70c95ae673..179fb99272 100644
--- a/src/plugins/platforms/qnx/qqnxintegration.h
+++ b/src/plugins/platforms/qnx/qqnxintegration.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxkeytranslator.h b/src/plugins/platforms/qnx/qqnxkeytranslator.h
index 5f4a14d178..47153ea71a 100644
--- a/src/plugins/platforms/qnx/qqnxkeytranslator.h
+++ b/src/plugins/platforms/qnx/qqnxkeytranslator.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxlgmon.cpp b/src/plugins/platforms/qnx/qqnxlgmon.cpp
index 3c8d1c11a5..8976cb52ae 100644
--- a/src/plugins/platforms/qnx/qqnxlgmon.cpp
+++ b/src/plugins/platforms/qnx/qqnxlgmon.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxlgmon.h b/src/plugins/platforms/qnx/qqnxlgmon.h
index e3930ce93a..805dd606bd 100644
--- a/src/plugins/platforms/qnx/qqnxlgmon.h
+++ b/src/plugins/platforms/qnx/qqnxlgmon.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnativeinterface.cpp b/src/plugins/platforms/qnx/qqnxnativeinterface.cpp
index 05504f8bf4..224a3c130d 100644
--- a/src/plugins/platforms/qnx/qqnxnativeinterface.cpp
+++ b/src/plugins/platforms/qnx/qqnxnativeinterface.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnativeinterface.h b/src/plugins/platforms/qnx/qqnxnativeinterface.h
index 41e6105f84..2fc9ecaefb 100644
--- a/src/plugins/platforms/qnx/qqnxnativeinterface.h
+++ b/src/plugins/platforms/qnx/qqnxnativeinterface.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatorbps.cpp b/src/plugins/platforms/qnx/qqnxnavigatorbps.cpp
index f6160604b4..833d94f615 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatorbps.cpp
+++ b/src/plugins/platforms/qnx/qqnxnavigatorbps.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatorbps.h b/src/plugins/platforms/qnx/qqnxnavigatorbps.h
index 6c17c3f32a..dc6c89282c 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatorbps.h
+++ b/src/plugins/platforms/qnx/qqnxnavigatorbps.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatorcover.cpp b/src/plugins/platforms/qnx/qqnxnavigatorcover.cpp
index 61caa623f5..9bd2a6c576 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatorcover.cpp
+++ b/src/plugins/platforms/qnx/qqnxnavigatorcover.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatorcover.h b/src/plugins/platforms/qnx/qqnxnavigatorcover.h
index cc35d0bf2a..560f198e38 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatorcover.h
+++ b/src/plugins/platforms/qnx/qqnxnavigatorcover.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.cpp b/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.cpp
index 76d0df4920..19a8f06732 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.cpp
+++ b/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.h b/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.h
index 883d893f5e..28b175d535 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.h
+++ b/src/plugins/platforms/qnx/qqnxnavigatoreventhandler.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.cpp b/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.cpp
index 8c8f1b2afe..f17693bf43 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.cpp
+++ b/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.h b/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.h
index e67152df88..a3591e2f87 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.h
+++ b/src/plugins/platforms/qnx/qqnxnavigatoreventnotifier.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatorpps.cpp b/src/plugins/platforms/qnx/qqnxnavigatorpps.cpp
index c5c40f5a23..44554be30f 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatorpps.cpp
+++ b/src/plugins/platforms/qnx/qqnxnavigatorpps.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxnavigatorpps.h b/src/plugins/platforms/qnx/qqnxnavigatorpps.h
index 1b4229e74f..c188f5af26 100644
--- a/src/plugins/platforms/qnx/qqnxnavigatorpps.h
+++ b/src/plugins/platforms/qnx/qqnxnavigatorpps.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxrasterbackingstore.cpp b/src/plugins/platforms/qnx/qqnxrasterbackingstore.cpp
index c986a960f3..33488309bf 100644
--- a/src/plugins/platforms/qnx/qqnxrasterbackingstore.cpp
+++ b/src/plugins/platforms/qnx/qqnxrasterbackingstore.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxrasterbackingstore.h b/src/plugins/platforms/qnx/qqnxrasterbackingstore.h
index d71e274a1d..81441e2beb 100644
--- a/src/plugins/platforms/qnx/qqnxrasterbackingstore.h
+++ b/src/plugins/platforms/qnx/qqnxrasterbackingstore.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxrasterwindow.cpp b/src/plugins/platforms/qnx/qqnxrasterwindow.cpp
index ead6e73a87..099cd68106 100644
--- a/src/plugins/platforms/qnx/qqnxrasterwindow.cpp
+++ b/src/plugins/platforms/qnx/qqnxrasterwindow.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxrasterwindow.h b/src/plugins/platforms/qnx/qqnxrasterwindow.h
index 2be5f63464..4e8b0e73e9 100644
--- a/src/plugins/platforms/qnx/qqnxrasterwindow.h
+++ b/src/plugins/platforms/qnx/qqnxrasterwindow.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxscreen.cpp b/src/plugins/platforms/qnx/qqnxscreen.cpp
index add45ecbe5..f3f93e7f64 100644
--- a/src/plugins/platforms/qnx/qqnxscreen.cpp
+++ b/src/plugins/platforms/qnx/qqnxscreen.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -209,6 +201,103 @@ QQnxScreen::~QQnxScreen()
     delete m_cursor;
 }
 
+QPixmap QQnxScreen::grabWindow(WId window, int x, int y, int width, int height) const
+{
+    QQnxWindow *qnxWin = findWindow(reinterpret_cast<screen_window_t>(window));
+    if (!qnxWin) {
+        qWarning("grabWindow: unknown window");
+        return QPixmap();
+    }
+
+    QRect bound = qnxWin->geometry();
+
+    if (width < 0)
+        width = bound.width();
+    if (height < 0)
+        height = bound.height();
+
+    bound &= QRect(x + bound.x(), y + bound.y(), width, height);
+
+    if (bound.width() <= 0 || bound.height() <= 0) {
+        qWarning("grabWindow: size is null");
+        return QPixmap();
+    }
+
+    // Create new context, only SCREEN_DISPLAY_MANAGER_CONTEXT can read from screen
+    screen_context_t context;
+    if (screen_create_context(&context, SCREEN_DISPLAY_MANAGER_CONTEXT)) {
+        if (errno == EPERM)
+            qWarning("grabWindow: root privileges required");
+        else
+            qWarning("grabWindow: cannot create context");
+        return QPixmap();
+    }
+
+    // Find corresponding display in SCREEN_DISPLAY_MANAGER_CONTEXT
+    int count = 0;
+    screen_display_t display = 0;
+    screen_get_context_property_iv(context, SCREEN_PROPERTY_DISPLAY_COUNT, &count);
+    if (count > 0) {
+        const size_t idLen = 30;
+        char matchId[idLen];
+        char id[idLen];
+        bool found = false;
+
+        screen_display_t *displays = static_cast<screen_display_t*>
+                                     (calloc(count, sizeof(screen_display_t)));
+        screen_get_context_property_pv(context, SCREEN_PROPERTY_DISPLAYS, (void **)displays);
+        screen_get_display_property_cv(m_display,  SCREEN_PROPERTY_ID_STRING, idLen, matchId);
+
+        while (count && !found) {
+            --count;
+            screen_get_display_property_cv(displays[count], SCREEN_PROPERTY_ID_STRING, idLen, id);
+            found = !strncmp(id, matchId, idLen);
+        }
+
+        if (found)
+            display = displays[count];
+
+        free(displays);
+    }
+
+    // Create screen and Qt pixmap
+    screen_pixmap_t pixmap;
+    QPixmap result;
+    if (display && !screen_create_pixmap(&pixmap, context)) {
+        screen_buffer_t buffer;
+        void *pointer;
+        int stride;
+        const int rect[4] = { bound.x(), bound.y(), bound.width(), bound.height() };
+
+        int val = SCREEN_USAGE_READ | SCREEN_USAGE_NATIVE;
+        screen_set_pixmap_property_iv(pixmap, SCREEN_PROPERTY_USAGE, &val);
+        val = SCREEN_FORMAT_RGBA8888;
+        screen_set_pixmap_property_iv(pixmap, SCREEN_PROPERTY_FORMAT, &val);
+
+        int err =    screen_set_pixmap_property_iv(pixmap, SCREEN_PROPERTY_BUFFER_SIZE, rect+2);
+        err = err || screen_create_pixmap_buffer(pixmap);
+        err = err || screen_get_pixmap_property_pv(pixmap, SCREEN_PROPERTY_RENDER_BUFFERS,
+                                                   reinterpret_cast<void**>(&buffer));
+        err = err || screen_get_buffer_property_pv(buffer, SCREEN_PROPERTY_POINTER, &pointer);
+        err = err || screen_get_buffer_property_iv(buffer, SCREEN_PROPERTY_STRIDE, &stride);
+        err = err || screen_read_display(display, buffer, 1, rect, 0);
+
+        if (!err) {
+            const QImage img(static_cast<unsigned char*>(pointer),
+                             bound.width(), bound.height(), stride, QImage::Format_ARGB32);
+            result = QPixmap::fromImage(img);
+        } else {
+            qWarning("grabWindow: capture error");
+        }
+        screen_destroy_pixmap(pixmap);
+    } else {
+        qWarning("grabWindow: display/pixmap error ");
+    }
+    screen_destroy_context(context);
+
+    return result;
+}
+
 static int defaultDepth()
 {
     qScreenDebug() << Q_FUNC_INFO;
@@ -348,7 +437,7 @@ void QQnxScreen::setRotation(int rotation)
         // Rotating only the primary screen is what we had in the navigator event handler before refactoring
         if (m_primaryScreen) {
             QWindowSystemInterface::handleScreenOrientationChange(screen(), orientation());
-            QWindowSystemInterface::handleScreenGeometryChange(screen(), m_currentGeometry);
+            QWindowSystemInterface::handleScreenGeometryChange(screen(), m_currentGeometry, availableGeometry());
         }
 
         // Flush everything, so that the windows rotations are applied properly.
@@ -463,7 +552,7 @@ void QQnxScreen::resizeWindows(const QRect &previousScreenGeometry)
     }
 }
 
-QQnxWindow *QQnxScreen::findWindow(screen_window_t windowHandle)
+QQnxWindow *QQnxScreen::findWindow(screen_window_t windowHandle) const
 {
     Q_FOREACH (QQnxWindow *window, m_childWindows) {
         QQnxWindow * const result = window->findWindow(windowHandle);
@@ -608,7 +697,7 @@ void QQnxScreen::keyboardHeightChanged(int height)
 
     m_keyboardHeight = height;
 
-    QWindowSystemInterface::handleScreenAvailableGeometryChange(screen(), availableGeometry());
+    QWindowSystemInterface::handleScreenGeometryChange(screen(), geometry(), availableGeometry());
 }
 
 void QQnxScreen::addOverlayWindow(screen_window_t window)
diff --git a/src/plugins/platforms/qnx/qqnxscreen.h b/src/plugins/platforms/qnx/qqnxscreen.h
index 6b2281f7b9..9fb79b32d8 100644
--- a/src/plugins/platforms/qnx/qqnxscreen.h
+++ b/src/plugins/platforms/qnx/qqnxscreen.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,6 +54,8 @@ public:
     QQnxScreen(screen_context_t context, screen_display_t display, bool primaryScreen);
     ~QQnxScreen();
 
+    QPixmap grabWindow(WId window, int x, int y, int width, int height) const;
+
     QRect geometry() const { return m_currentGeometry; }
     QRect availableGeometry() const;
     int depth() const;
@@ -86,7 +80,7 @@ public:
     screen_context_t nativeContext() const { return m_screenContext; }
     const char *windowGroupName() const { return m_rootWindow ? m_rootWindow->groupName().constData() : 0; }
 
-    QQnxWindow *findWindow(screen_window_t windowHandle);
+    QQnxWindow *findWindow(screen_window_t windowHandle) const;
 
     /* Window hierarchy management */
     void addWindow(QQnxWindow *child);
diff --git a/src/plugins/platforms/qnx/qqnxscreeneventfilter.h b/src/plugins/platforms/qnx/qqnxscreeneventfilter.h
index f9ecadd2a9..ff3c29d826 100644
--- a/src/plugins/platforms/qnx/qqnxscreeneventfilter.h
+++ b/src/plugins/platforms/qnx/qqnxscreeneventfilter.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxscreeneventhandler.cpp b/src/plugins/platforms/qnx/qqnxscreeneventhandler.cpp
index 5724fbd92a..baff5b45ac 100644
--- a/src/plugins/platforms/qnx/qqnxscreeneventhandler.cpp
+++ b/src/plugins/platforms/qnx/qqnxscreeneventhandler.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxscreeneventhandler.h b/src/plugins/platforms/qnx/qqnxscreeneventhandler.h
index bab6420cb8..51516ad47f 100644
--- a/src/plugins/platforms/qnx/qqnxscreeneventhandler.h
+++ b/src/plugins/platforms/qnx/qqnxscreeneventhandler.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxscreeneventthread.cpp b/src/plugins/platforms/qnx/qqnxscreeneventthread.cpp
index b66de3cac5..9b503ddca5 100644
--- a/src/plugins/platforms/qnx/qqnxscreeneventthread.cpp
+++ b/src/plugins/platforms/qnx/qqnxscreeneventthread.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxscreeneventthread.h b/src/plugins/platforms/qnx/qqnxscreeneventthread.h
index cbdb505b3b..8826d5b4b1 100644
--- a/src/plugins/platforms/qnx/qqnxscreeneventthread.h
+++ b/src/plugins/platforms/qnx/qqnxscreeneventthread.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxservices.cpp b/src/plugins/platforms/qnx/qqnxservices.cpp
index cafc576d28..56243f2d2e 100644
--- a/src/plugins/platforms/qnx/qqnxservices.cpp
+++ b/src/plugins/platforms/qnx/qqnxservices.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxservices.h b/src/plugins/platforms/qnx/qqnxservices.h
index 6c8d7aaae8..71eed43fc1 100644
--- a/src/plugins/platforms/qnx/qqnxservices.h
+++ b/src/plugins/platforms/qnx/qqnxservices.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxsystemsettings.cpp b/src/plugins/platforms/qnx/qqnxsystemsettings.cpp
index 6194a61012..521cec7033 100644
--- a/src/plugins/platforms/qnx/qqnxsystemsettings.cpp
+++ b/src/plugins/platforms/qnx/qqnxsystemsettings.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxsystemsettings.h b/src/plugins/platforms/qnx/qqnxsystemsettings.h
index e3c7f29145..3402243572 100644
--- a/src/plugins/platforms/qnx/qqnxsystemsettings.h
+++ b/src/plugins/platforms/qnx/qqnxsystemsettings.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.cpp b/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.cpp
index 232bd80fd0..5c6346fdef 100644
--- a/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.cpp
+++ b/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.h b/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.h
index 5749deb4e0..5e01cc06d8 100644
--- a/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.h
+++ b/src/plugins/platforms/qnx/qqnxvirtualkeyboardbps.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.cpp b/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.cpp
index 78180ec4a7..68689b292d 100644
--- a/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.cpp
+++ b/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.h b/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.h
index 2b56d5afbe..faba3409d9 100644
--- a/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.h
+++ b/src/plugins/platforms/qnx/qqnxvirtualkeyboardpps.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/qnx/qqnxwindow.cpp b/src/plugins/platforms/qnx/qqnxwindow.cpp
index 5a405f9577..0ea6693c64 100644
--- a/src/plugins/platforms/qnx/qqnxwindow.cpp
+++ b/src/plugins/platforms/qnx/qqnxwindow.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -83,7 +75,7 @@ QT_BEGIN_NAMESPACE
     the default behavior suffices, some circumstances require greater control over the
     interaction with screen.
 
-    \section1 Window types
+    \section1 Window Types
 
     The QNX QPA plugin can operate in two modes, with or without a root window. The
     selection of mode is made via the \e rootwindow and \e no-rootwindow options to the
@@ -252,7 +244,7 @@ void QQnxWindow::setGeometry(const QRect &rect)
         setGeometryHelper(newGeometry);
 
     if (isExposed())
-        QWindowSystemInterface::handleExposeEvent(window(), newGeometry);
+        QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), newGeometry.size()));
 }
 
 void QQnxWindow::setGeometryHelper(const QRect &rect)
@@ -306,7 +298,7 @@ void QQnxWindow::setVisible(bool visible)
 
     root->updateVisibility(root->m_visible);
 
-    QWindowSystemInterface::handleExposeEvent(window(), window()->geometry());
+    QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), window()->geometry().size()));
 
     if (visible) {
         applyWindowState();
@@ -345,7 +337,7 @@ void QQnxWindow::setExposed(bool exposed)
 
     if (m_exposed != exposed) {
         m_exposed = exposed;
-        QWindowSystemInterface::handleExposeEvent(window(), window()->geometry());
+        QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(0, 0), window()->geometry().size()));
     }
 }
 
diff --git a/src/plugins/platforms/qnx/qqnxwindow.h b/src/plugins/platforms/qnx/qqnxwindow.h
index 94df903336..4f52b03bfb 100644
--- a/src/plugins/platforms/qnx/qqnxwindow.h
+++ b/src/plugins/platforms/qnx/qqnxwindow.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/accessible/comutils.cpp b/src/plugins/platforms/windows/accessible/comutils.cpp
index 6c67345e05..a1ebb8a177 100644
--- a/src/plugins/platforms/windows/accessible/comutils.cpp
+++ b/src/plugins/platforms/windows/accessible/comutils.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/accessible/comutils.h b/src/plugins/platforms/windows/accessible/comutils.h
index ebf16dfdf8..c5435f49f1 100644
--- a/src/plugins/platforms/windows/accessible/comutils.h
+++ b/src/plugins/platforms/windows/accessible/comutils.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/accessible/iaccessible2.cpp b/src/plugins/platforms/windows/accessible/iaccessible2.cpp
index 032f33163a..7f60be0d50 100644
--- a/src/plugins/platforms/windows/accessible/iaccessible2.cpp
+++ b/src/plugins/platforms/windows/accessible/iaccessible2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,7 +35,7 @@
 
 #include "iaccessible2.h"
 #include "qwindowsaccessibility.h"
-
+#include <QtPlatformSupport/private/qaccessiblebridgeutils_p.h>
 #include <QtGui/qaccessible.h>
 #include <QtGui/qclipboard.h>
 #include <QtWidgets/qapplication.h>
@@ -358,6 +350,8 @@ HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::role(long *ia2role)
     case QAccessible::LayeredPane: r = IA2_ROLE_LAYERED_PANE; break;
     case QAccessible::Terminal: r = IA2_ROLE_TERMINAL; break;
     case QAccessible::Desktop: r = IA2_ROLE_DESKTOP_PANE; break;
+    case QAccessible::Paragraph: r = IA2_ROLE_PARAGRAPH; break;
+    case QAccessible::Section: r = IA2_ROLE_SECTION; break;
     default: break;
     }
 
@@ -545,10 +539,7 @@ HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::nActions(long *nActions)
     accessibleDebugClientCalls(accessible);
     if (!accessible)
         return E_FAIL;
-    *nActions = 0;
-
-    if (QAccessibleActionInterface *actionIface = actionInterface())
-        *nActions = actionIface->actionNames().count();
+    *nActions = QAccessibleBridgeUtils::effectiveActionNames(accessible).count();
     return S_OK;
 }
 
@@ -558,15 +549,11 @@ HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::doAction(long actionIndex)
     accessibleDebugClientCalls(accessible);
     if (!accessible)
         return E_FAIL;
-    if (QAccessibleActionInterface *actionIface = actionInterface()) {
-        const QStringList actionNames = actionIface->actionNames();
-        if (actionIndex < 0 || actionIndex >= actionNames.count())
-            return E_INVALIDARG;
-        const QString actionName = actionNames.at(actionIndex);
-        actionIface->doAction(actionName);
-        return S_OK;
-    }
-    return S_FALSE;
+    const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(accessible);
+    if (actionIndex < 0 || actionIndex >= actionNames.count())
+        return E_INVALIDARG;
+    const QString actionName = actionNames.at(actionIndex);
+    return QAccessibleBridgeUtils::performEffectiveAction(accessible, actionName) ? S_OK : S_FALSE;
 }
 
 HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::get_description(long actionIndex, BSTR *description)
@@ -576,13 +563,15 @@ HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::get_description(long actionInde
     if (!accessible)
         return E_FAIL;
     *description = 0;
-    if (QAccessibleActionInterface *actionIface = actionInterface()) {
-        const QStringList actionNames = actionIface->actionNames();
-        if (actionIndex < 0 || actionIndex >= actionNames.count())
-            return E_INVALIDARG;
-        const QString actionName = actionNames.at(actionIndex);
+    const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(accessible);
+    if (actionIndex < 0 || actionIndex >= actionNames.count())
+        return E_INVALIDARG;
+    const QString actionName = actionNames.at(actionIndex);
+    if (QAccessibleActionInterface *actionIface = actionInterface())
         *description = QStringToBSTR(actionIface->localizedActionDescription(actionName));
-    }
+    else
+        *description = QStringToBSTR(qAccessibleLocalizedActionDescription(actionName));
+
     return *description ? S_OK : S_FALSE;
 }
 
@@ -622,13 +611,11 @@ HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::get_name(long actionIndex, BSTR
     if (!accessible)
         return E_FAIL;
     *name = 0;
-    if (QAccessibleActionInterface *actionIface = actionInterface()) {
-        const QStringList actionNames = actionIface->actionNames();
-        if (actionIndex < 0 || actionIndex >= actionNames.count())
-            return E_INVALIDARG;
-        const QString actionName = actionNames.at(actionIndex);
-        *name = QStringToBSTR(actionName);
-    }
+    const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(accessible);
+    if (actionIndex < 0 || actionIndex >= actionNames.count())
+        return E_INVALIDARG;
+    const QString actionName = actionNames.at(actionIndex);
+    *name = QStringToBSTR(actionName);
     return *name ? S_OK : S_FALSE;
 }
 
@@ -639,14 +626,16 @@ HRESULT STDMETHODCALLTYPE QWindowsIA2Accessible::get_localizedName(long actionIn
     if (!accessible)
         return E_FAIL;
     *localizedName = 0;
-    if (QAccessibleActionInterface *actionIface = actionInterface()) {
-        const QStringList actionNames = actionIface->actionNames();
-        if (actionIndex < 0 || actionIndex >= actionNames.count())
-            return E_INVALIDARG;
+    const QStringList actionNames = QAccessibleBridgeUtils::effectiveActionNames(accessible);
+    if (actionIndex < 0 || actionIndex >= actionNames.count())
+        return E_INVALIDARG;
 
-        const QString actionName = actionNames.at(actionIndex);
+    const QString actionName = actionNames.at(actionIndex);
+    if (QAccessibleActionInterface *actionIface = actionInterface())
         *localizedName = QStringToBSTR(actionIface->localizedActionName(actionName));
-    }
+    else
+        *localizedName = QStringToBSTR(QAccessibleActionInterface::tr(qPrintable(actionName)));
+
     return *localizedName ? S_OK : S_FALSE;
 }
 
@@ -1709,6 +1698,13 @@ QByteArray QWindowsIA2Accessible::IIDToString(REFIID id)
     return strGuid;
 }
 
+// Q_STATIC_ASSERT(IA2_ROLE_CANVAS == QAccessible::Canvas); // ### Qt 6: make them the same
+Q_STATIC_ASSERT(IA2_ROLE_COLOR_CHOOSER == QAccessible::ColorChooser);
+Q_STATIC_ASSERT(IA2_ROLE_FOOTER == QAccessible::Footer);
+Q_STATIC_ASSERT(IA2_ROLE_FORM == QAccessible::Form);
+Q_STATIC_ASSERT(IA2_ROLE_HEADING == QAccessible::Heading);
+Q_STATIC_ASSERT(IA2_ROLE_NOTE == QAccessible::Note);
+Q_STATIC_ASSERT(IA2_ROLE_COMPLEMENTARY_CONTENT == QAccessible::ComplementaryContent);
 
 QT_END_NAMESPACE
 
diff --git a/src/plugins/platforms/windows/accessible/iaccessible2.h b/src/plugins/platforms/windows/accessible/iaccessible2.h
index 9c42fdc631..351bf2555c 100644
--- a/src/plugins/platforms/windows/accessible/iaccessible2.h
+++ b/src/plugins/platforms/windows/accessible/iaccessible2.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/accessible/qwindowsaccessibility.cpp b/src/plugins/platforms/windows/accessible/qwindowsaccessibility.cpp
index 139e1dbecd..d0eb8485fa 100644
--- a/src/plugins/platforms/windows/accessible/qwindowsaccessibility.cpp
+++ b/src/plugins/platforms/windows/accessible/qwindowsaccessibility.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/accessible/qwindowsaccessibility.h b/src/plugins/platforms/windows/accessible/qwindowsaccessibility.h
index f25e2281a0..df1bad9ece 100644
--- a/src/plugins/platforms/windows/accessible/qwindowsaccessibility.h
+++ b/src/plugins/platforms/windows/accessible/qwindowsaccessibility.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.cpp b/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.cpp
index bda806d102..a115d7c477 100644
--- a/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.cpp
+++ b/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -890,6 +882,11 @@ HRESULT STDMETHODCALLTYPE QWindowsMsaaAccessible::get_accName(VARIANT varID, BST
             }
         }
     }
+
+    QString shortcut = accessible->text(QAccessible::Accelerator);
+    if (!shortcut.isEmpty())
+        name.append(QLatin1Char(' ') + shortcut);
+
     if (name.size()) {
         *pszName = QStringToBSTR(name);
         return S_OK;
@@ -930,6 +927,8 @@ HRESULT STDMETHODCALLTYPE QWindowsMsaaAccessible::get_accRole(VARIANT varID, VAR
             // does not support IAccessible2, since it should prefer IA2::role() then.
             if (role == QAccessible::LayeredPane)
                 role = QAccessible::Pane;
+            else if (role == QAccessible::WebDocument)
+                role = QAccessible::Document;
             else
                 role = QAccessible::Client;
         }
@@ -1034,7 +1033,7 @@ HRESULT STDMETHODCALLTYPE QWindowsMsaaAccessible::get_accValue(VARIANT varID, BS
 
     QString value;
     if (accessible->valueInterface()) {
-        value = QString::number(accessible->valueInterface()->currentValue().toDouble());
+        value = accessible->valueInterface()->currentValue().toString();
     } else {
         value = accessible->text(QAccessible::Value);
     }
diff --git a/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.h b/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.h
index 43482da4be..a78d821b1d 100644
--- a/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.h
+++ b/src/plugins/platforms/windows/accessible/qwindowsmsaaaccessible.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/array.h b/src/plugins/platforms/windows/array.h
index 9b7e3a0acb..650a003de5 100644
--- a/src/plugins/platforms/windows/array.h
+++ b/src/plugins/platforms/windows/array.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/cursors.qrc b/src/plugins/platforms/windows/cursors.qrc
new file mode 100644
index 0000000000..fded527aac
--- /dev/null
+++ b/src/plugins/platforms/windows/cursors.qrc
@@ -0,0 +1,25 @@
+<RCC>
+    <qresource prefix="/qt-project.org/windows/cursors">
+        <file>images/closedhandcursor_32.png</file>
+        <file>images/closedhandcursor_48.png</file>
+        <file>images/closedhandcursor_64.png</file>
+        <file>images/dragcopycursor_32.png</file>
+        <file>images/dragcopycursor_48.png</file>
+        <file>images/dragcopycursor_64.png</file>
+        <file>images/draglinkcursor_32.png</file>
+        <file>images/draglinkcursor_48.png</file>
+        <file>images/draglinkcursor_64.png</file>
+        <file>images/dragmovecursor_32.png</file>
+        <file>images/dragmovecursor_48.png</file>
+        <file>images/dragmovecursor_64.png</file>
+        <file>images/openhandcursor_32.png</file>
+        <file>images/openhandcursor_48.png</file>
+        <file>images/openhandcursor_64.png</file>
+        <file>images/splithcursor_32.png</file>
+        <file>images/splithcursor_48.png</file>
+        <file>images/splithcursor_64.png</file>
+        <file>images/splitvcursor_32.png</file>
+        <file>images/splitvcursor_48.png</file>
+        <file>images/splitvcursor_64.png</file>
+    </qresource>
+</RCC>
diff --git a/src/plugins/platforms/windows/images/closedhandcursor_32.png b/src/plugins/platforms/windows/images/closedhandcursor_32.png
new file mode 100644
index 0000000000..7b3cba1965
--- /dev/null
+++ b/src/plugins/platforms/windows/images/closedhandcursor_32.png
diff --git a/src/plugins/platforms/windows/images/closedhandcursor_48.png b/src/plugins/platforms/windows/images/closedhandcursor_48.png
new file mode 100644
index 0000000000..e63031605e
--- /dev/null
+++ b/src/plugins/platforms/windows/images/closedhandcursor_48.png
diff --git a/src/plugins/platforms/windows/images/closedhandcursor_64.png b/src/plugins/platforms/windows/images/closedhandcursor_64.png
new file mode 100644
index 0000000000..438680ed4e
--- /dev/null
+++ b/src/plugins/platforms/windows/images/closedhandcursor_64.png
diff --git a/src/plugins/platforms/windows/images/dragcopycursor_32.png b/src/plugins/platforms/windows/images/dragcopycursor_32.png
new file mode 100644
index 0000000000..f40ac6a600
--- /dev/null
+++ b/src/plugins/platforms/windows/images/dragcopycursor_32.png
diff --git a/src/plugins/platforms/windows/images/dragcopycursor_48.png b/src/plugins/platforms/windows/images/dragcopycursor_48.png
new file mode 100644
index 0000000000..21ee467f46
--- /dev/null
+++ b/src/plugins/platforms/windows/images/dragcopycursor_48.png
diff --git a/src/plugins/platforms/windows/images/dragcopycursor_64.png b/src/plugins/platforms/windows/images/dragcopycursor_64.png
new file mode 100644
index 0000000000..c49bcf33aa
--- /dev/null
+++ b/src/plugins/platforms/windows/images/dragcopycursor_64.png
diff --git a/src/plugins/platforms/windows/images/draglinkcursor_32.png b/src/plugins/platforms/windows/images/draglinkcursor_32.png
new file mode 100644
index 0000000000..5efbce90d3
--- /dev/null
+++ b/src/plugins/platforms/windows/images/draglinkcursor_32.png
diff --git a/src/plugins/platforms/windows/images/draglinkcursor_48.png b/src/plugins/platforms/windows/images/draglinkcursor_48.png
new file mode 100644
index 0000000000..51205101b1
--- /dev/null
+++ b/src/plugins/platforms/windows/images/draglinkcursor_48.png
diff --git a/src/plugins/platforms/windows/images/draglinkcursor_64.png b/src/plugins/platforms/windows/images/draglinkcursor_64.png
new file mode 100644
index 0000000000..55eb0e313a
--- /dev/null
+++ b/src/plugins/platforms/windows/images/draglinkcursor_64.png
diff --git a/src/plugins/platforms/windows/images/dragmovecursor_32.png b/src/plugins/platforms/windows/images/dragmovecursor_32.png
new file mode 100644
index 0000000000..32781a15ff
--- /dev/null
+++ b/src/plugins/platforms/windows/images/dragmovecursor_32.png
diff --git a/src/plugins/platforms/windows/images/dragmovecursor_48.png b/src/plugins/platforms/windows/images/dragmovecursor_48.png
new file mode 100644
index 0000000000..6b15af6e84
--- /dev/null
+++ b/src/plugins/platforms/windows/images/dragmovecursor_48.png
diff --git a/src/plugins/platforms/windows/images/dragmovecursor_64.png b/src/plugins/platforms/windows/images/dragmovecursor_64.png
new file mode 100644
index 0000000000..e9e4ece29f
--- /dev/null
+++ b/src/plugins/platforms/windows/images/dragmovecursor_64.png
diff --git a/src/plugins/platforms/windows/images/openhandcursor_32.png b/src/plugins/platforms/windows/images/openhandcursor_32.png
new file mode 100644
index 0000000000..a6948d48f7
--- /dev/null
+++ b/src/plugins/platforms/windows/images/openhandcursor_32.png
diff --git a/src/plugins/platforms/windows/images/openhandcursor_48.png b/src/plugins/platforms/windows/images/openhandcursor_48.png
new file mode 100644
index 0000000000..e8beb8d29d
--- /dev/null
+++ b/src/plugins/platforms/windows/images/openhandcursor_48.png
diff --git a/src/plugins/platforms/windows/images/openhandcursor_64.png b/src/plugins/platforms/windows/images/openhandcursor_64.png
new file mode 100644
index 0000000000..d12e3a7283
--- /dev/null
+++ b/src/plugins/platforms/windows/images/openhandcursor_64.png
diff --git a/src/plugins/platforms/windows/images/splithcursor_32.png b/src/plugins/platforms/windows/images/splithcursor_32.png
new file mode 100644
index 0000000000..1ad479eddf
--- /dev/null
+++ b/src/plugins/platforms/windows/images/splithcursor_32.png
diff --git a/src/plugins/platforms/windows/images/splithcursor_48.png b/src/plugins/platforms/windows/images/splithcursor_48.png
new file mode 100644
index 0000000000..bf59b9cdca
--- /dev/null
+++ b/src/plugins/platforms/windows/images/splithcursor_48.png
diff --git a/src/plugins/platforms/windows/images/splithcursor_64.png b/src/plugins/platforms/windows/images/splithcursor_64.png
new file mode 100644
index 0000000000..b857458671
--- /dev/null
+++ b/src/plugins/platforms/windows/images/splithcursor_64.png
diff --git a/src/plugins/platforms/windows/images/splitvcursor_32.png b/src/plugins/platforms/windows/images/splitvcursor_32.png
new file mode 100644
index 0000000000..ebb55ae2e1
--- /dev/null
+++ b/src/plugins/platforms/windows/images/splitvcursor_32.png
diff --git a/src/plugins/platforms/windows/images/splitvcursor_48.png b/src/plugins/platforms/windows/images/splitvcursor_48.png
new file mode 100644
index 0000000000..5408920652
--- /dev/null
+++ b/src/plugins/platforms/windows/images/splitvcursor_48.png
diff --git a/src/plugins/platforms/windows/images/splitvcursor_64.png b/src/plugins/platforms/windows/images/splitvcursor_64.png
new file mode 100644
index 0000000000..7f09a40c01
--- /dev/null
+++ b/src/plugins/platforms/windows/images/splitvcursor_64.png
diff --git a/src/plugins/platforms/windows/main.cpp b/src/plugins/platforms/windows/main.cpp
index a0057534b8..a671dfa28d 100644
--- a/src/plugins/platforms/windows/main.cpp
+++ b/src/plugins/platforms/windows/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,7 +45,7 @@ QT_BEGIN_NAMESPACE
 
     \brief Class documentation of the  Qt Lighthouse plugin for Windows.
 
-    \section1 Supported parameters
+    \section1 Supported Parameters
 
     The following parameters can be passed on to the -platform argument
     of QGuiApplication:
diff --git a/src/plugins/platforms/windows/qplatformfunctions_wince.h b/src/plugins/platforms/windows/qplatformfunctions_wince.h
index 47b03b29cc..777f2a0784 100644
--- a/src/plugins/platforms/windows/qplatformfunctions_wince.h
+++ b/src/plugins/platforms/windows/qplatformfunctions_wince.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,7 +67,6 @@
 #ifndef CWP_SKIPINVISIBLE
 #define CWP_SKIPINVISIBLE   0x0001
 #define CWP_SKIPTRANSPARENT 0x0004
-#define findPlatformWindowAt(a, b, c) findPlatformWindowAt(a, b)
 #endif
 
 #ifndef CS_OWNDC
@@ -95,10 +86,6 @@
 #define SW_SHOWMINIMIZED SW_MINIMIZE
 #define SW_SHOWMINNOACTIVE SW_MINIMIZE
 
-#ifndef ChildWindowFromPointEx
-#define ChildWindowFromPointEx(a, b, c) ChildWindowFromPoint(a, b)
-#endif
-
 #ifndef CF_DIBV5
 #define CF_DIBV5            17
 #endif
diff --git a/src/plugins/platforms/windows/qtwindows_additional.h b/src/plugins/platforms/windows/qtwindows_additional.h
index 4c08a664d8..9451b9ce55 100644
--- a/src/plugins/platforms/windows/qtwindows_additional.h
+++ b/src/plugins/platforms/windows/qtwindows_additional.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qtwindowsglobal.h b/src/plugins/platforms/windows/qtwindowsglobal.h
index ee640224cf..99c97d156f 100644
--- a/src/plugins/platforms/windows/qtwindowsglobal.h
+++ b/src/plugins/platforms/windows/qtwindowsglobal.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,6 +69,7 @@ enum WindowsEventType // Simplify event types
     LeaveEvent = WindowEventFlag + 5,
     CloseEvent = WindowEventFlag + 6,
     ShowEvent = WindowEventFlag + 7,
+    ShowEventOnParentRestoring = WindowEventFlag + 20,
     HideEvent = WindowEventFlag + 8,
     DestroyEvent = WindowEventFlag + 9,
     MoveEvent = WindowEventFlag + 10,
@@ -103,6 +96,7 @@ enum WindowsEventType // Simplify event types
     AccessibleObjectFromWindowRequest = ApplicationEventFlag + 3,
     QueryEndSessionApplicationEvent = ApplicationEventFlag + 4,
     EndSessionApplicationEvent = ApplicationEventFlag + 5,
+    AppCommandEvent = ApplicationEventFlag + 6,
     InputMethodStartCompositionEvent = InputMethodEventFlag + 1,
     InputMethodCompositionEvent = InputMethodEventFlag + 2,
     InputMethodEndCompositionEvent = InputMethodEventFlag + 3,
@@ -117,9 +111,17 @@ enum WindowsEventType // Simplify event types
     UnknownEvent = 542
 };
 
+// Matches Process_DPI_Awareness (Windows 8.1 onwards), used for SetProcessDpiAwareness()
+enum ProcessDpiAwareness
+{
+    ProcessDpiUnaware,
+    ProcessSystemDpiAware,
+    ProcessPerMonitorDpiAware
+};
+
 } // namespace QtWindows
 
-inline QtWindows::WindowsEventType windowsEventType(UINT message, WPARAM wParamIn)
+inline QtWindows::WindowsEventType windowsEventType(UINT message, WPARAM wParamIn, LPARAM lParamIn)
 {
     switch (message) {
     case WM_PAINT:
@@ -147,7 +149,9 @@ inline QtWindows::WindowsEventType windowsEventType(UINT message, WPARAM wParamI
     case WM_MOVE:
         return QtWindows::MoveEvent;
     case WM_SHOWWINDOW:
-        return wParamIn ? QtWindows::ShowEvent : QtWindows::HideEvent;
+        if (wParamIn)
+            return lParamIn == SW_PARENTOPENING ? QtWindows::ShowEventOnParentRestoring : QtWindows::ShowEvent;
+        return QtWindows::HideEvent;
     case WM_SIZE:
         return QtWindows::ResizeEvent;
     case WM_NCCALCSIZE:
@@ -234,6 +238,10 @@ inline QtWindows::WindowsEventType windowsEventType(UINT message, WPARAM wParamI
     case WM_ENDSESSION:
         return QtWindows::EndSessionApplicationEvent;
 #endif
+#if defined(WM_APPCOMMAND)
+    case WM_APPCOMMAND:
+        return QtWindows::AppCommandEvent;
+#endif
     default:
         break;
     }
diff --git a/src/plugins/platforms/windows/qwindowsbackingstore.cpp b/src/plugins/platforms/windows/qwindowsbackingstore.cpp
index 34a9c1df5f..e381baa57a 100644
--- a/src/plugins/platforms/windows/qwindowsbackingstore.cpp
+++ b/src/plugins/platforms/windows/qwindowsbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #include "qwindowswindow.h"
 #include "qwindowsnativeimage.h"
 #include "qwindowscontext.h"
+#include "qwindowsscaling.h"
 
 #include <QtGui/QWindow>
 #include <QtGui/QPainter>
@@ -75,12 +68,10 @@ QPaintDevice *QWindowsBackingStore::paintDevice()
     return &m_image->image();
 }
 
-void QWindowsBackingStore::flush(QWindow *window, const QRegion &region,
-                                        const QPoint &offset)
+void QWindowsBackingStore::flushDp(QWindow *window, const QRect &br, const QPoint &offset)
 {
     Q_ASSERT(window);
 
-    const QRect br = region.boundingRect();
     if (QWindowsContext::verbose > 1)
         qCDebug(lcQpaBackingStore) << __FUNCTION__ << this << window << offset << br;
     QWindowsWindow *rw = QWindowsWindow::baseWindowOf(window);
@@ -90,8 +81,9 @@ void QWindowsBackingStore::flush(QWindow *window, const QRegion &region,
     const Qt::WindowFlags flags = window->flags();
     if ((flags & Qt::FramelessWindowHint) && QWindowsWindow::setWindowLayered(rw->handle(), flags, hasAlpha, rw->opacity()) && hasAlpha) {
         // Windows with alpha: Use blend function to update.
-        QRect r = window->frameGeometry();
-        QPoint frameOffset(window->frameMargins().left(), window->frameMargins().top());
+        const QMargins marginsDP = rw->frameMarginsDp();
+        const QRect r = rw->geometryDp() + marginsDP;
+        const QPoint frameOffset(marginsDP.left(), marginsDP.top());
         QRect dirtyRect = br.translated(offset + frameOffset);
 
         SIZE size = {r.width(), r.height()};
@@ -135,14 +127,15 @@ void QWindowsBackingStore::flush(QWindow *window, const QRegion &region,
     }
 }
 
-void QWindowsBackingStore::resize(const QSize &size, const QRegion &region)
+void QWindowsBackingStore::resize(const QSize &sizeDip, const QRegion &regionDip)
 {
+    const QSize size = sizeDip * QWindowsScaling::factor();
     if (m_image.isNull() || m_image->image().size() != size) {
 #ifndef QT_NO_DEBUG_OUTPUT
         if (QWindowsContext::verbose && lcQpaBackingStore().isDebugEnabled()) {
             qCDebug(lcQpaBackingStore)
-                << __FUNCTION__ << ' ' << window() << ' ' << size << ' ' << region
-                << " from: " << (m_image.isNull() ? QSize() : m_image->image().size());
+                << __FUNCTION__ << ' ' << window() << ' ' << size << ' ' << sizeDip << ' '
+                << regionDip << " from: " << (m_image.isNull() ? QSize() : m_image->image().size());
         }
 #endif
         const QImage::Format format = window()->format().hasAlpha() ?
@@ -151,10 +144,10 @@ void QWindowsBackingStore::resize(const QSize &size, const QRegion &region)
         QWindowsNativeImage *oldwni = m_image.data();
         QWindowsNativeImage *newwni = new QWindowsNativeImage(size.width(), size.height(), format);
 
-        if (oldwni && !region.isEmpty()) {
+        if (oldwni && !regionDip.isEmpty()) {
             const QImage &oldimg(oldwni->image());
             QImage &newimg(newwni->image());
-            QRegion staticRegion(region);
+            QRegion staticRegion = QWindowsScaling::mapToNative(regionDip);
             staticRegion &= QRect(0, 0, oldimg.width(), oldimg.height());
             staticRegion &= QRect(0, 0, newimg.width(), newimg.height());
             QPainter painter(&newimg);
@@ -163,35 +156,38 @@ void QWindowsBackingStore::resize(const QSize &size, const QRegion &region)
                 painter.drawImage(rect, oldimg, rect);
         }
 
+        if (QWindowsScaling::isActive())
+            newwni->setDevicePixelRatio(QWindowsScaling::factor());
         m_image.reset(newwni);
     }
 }
 
 Q_GUI_EXPORT void qt_scrollRectInImage(QImage &img, const QRect &rect, const QPoint &offset);
 
-bool QWindowsBackingStore::scroll(const QRegion &area, int dx, int dy)
+bool QWindowsBackingStore::scroll(const QRegion &areaDip, int dxDip, int dyDip)
 {
     if (m_image.isNull() || m_image->image().isNull())
         return false;
 
-    const QVector<QRect> rects = area.rects();
+    const QPoint dp = QPoint(dxDip, dyDip) * QWindowsScaling::factor();
+    const QVector<QRect> rects = areaDip.rects();
     for (int i = 0; i < rects.size(); ++i)
-        qt_scrollRectInImage(m_image->image(), rects.at(i), QPoint(dx, dy));
+        qt_scrollRectInImage(m_image->image(), QWindowsScaling::mapToNative(rects.at(i)), dp);
 
     return true;
 }
 
-void QWindowsBackingStore::beginPaint(const QRegion &region)
+void QWindowsBackingStore::beginPaint(const QRegion &regionDip)
 {
     if (QWindowsContext::verbose > 1)
-        qCDebug(lcQpaBackingStore) <<__FUNCTION__ << region;
+        qCDebug(lcQpaBackingStore) <<__FUNCTION__ << regionDip;
 
     if (m_image->image().hasAlphaChannel()) {
         QPainter p(&m_image->image());
         p.setCompositionMode(QPainter::CompositionMode_Source);
         const QColor blank = Qt::transparent;
-        foreach (const QRect &r, region.rects())
-            p.fillRect(r, blank);
+        foreach (const QRect &r, regionDip.rects())
+            p.fillRect(QWindowsScaling::mapToNative(r), blank);
     }
 }
 
diff --git a/src/plugins/platforms/windows/qwindowsbackingstore.h b/src/plugins/platforms/windows/qwindowsbackingstore.h
index 758f6c941f..c5d22c2b01 100644
--- a/src/plugins/platforms/windows/qwindowsbackingstore.h
+++ b/src/plugins/platforms/windows/qwindowsbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #define QWINDOWSBACKINGSTORE_H
 
 #include "qtwindows_additional.h"
+#include "qwindowsscaling.h"
 
 #include <qpa/qplatformbackingstore.h>
 #include <QtCore/QScopedPointer>
@@ -59,11 +52,16 @@ public:
     QWindowsBackingStore(QWindow *window);
     ~QWindowsBackingStore();
 
-    virtual QPaintDevice *paintDevice();
-    virtual void flush(QWindow *window, const QRegion &region, const QPoint &offset);
-    virtual void resize(const QSize &size, const QRegion &r);
-    virtual bool scroll(const QRegion &area, int dx, int dy);
-    virtual void beginPaint(const QRegion &);
+    QPaintDevice *paintDevice() Q_DECL_OVERRIDE;
+    void flush(QWindow *window, const QRegion &region, const QPoint &offset) Q_DECL_OVERRIDE
+    {
+        flushDp(window, QWindowsScaling::mapToNative(region.boundingRect()),
+                offset * QWindowsScaling::factor());
+    }
+    void flushDp(QWindow *window, const QRect &boundingRect, const QPoint &offset);
+    void resize(const QSize &size, const QRegion &r) Q_DECL_OVERRIDE;
+    bool scroll(const QRegion &area, int dx, int dy) Q_DECL_OVERRIDE;
+    void beginPaint(const QRegion &) Q_DECL_OVERRIDE;
 
     HDC getDC() const;
 
diff --git a/src/plugins/platforms/windows/qwindowsclipboard.cpp b/src/plugins/platforms/windows/qwindowsclipboard.cpp
index dcfeba12fa..354245217c 100644
--- a/src/plugins/platforms/windows/qwindowsclipboard.cpp
+++ b/src/plugins/platforms/windows/qwindowsclipboard.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -145,7 +137,7 @@ static void cleanClipboardPostRoutine()
 QWindowsClipboard *QWindowsClipboard::m_instance = 0;
 
 QWindowsClipboard::QWindowsClipboard() :
-    m_data(0), m_clipboardViewer(0), m_nextClipboardViewer(0)
+    m_data(0), m_clipboardViewer(0), m_nextClipboardViewer(0), m_formatListenerRegistered(false)
 {
     QWindowsClipboard::m_instance = this;
     qAddPostRoutine(cleanClipboardPostRoutine);
@@ -178,20 +170,40 @@ void QWindowsClipboard::registerViewer()
     m_clipboardViewer = QWindowsContext::instance()->
         createDummyWindow(QStringLiteral("Qt5ClipboardView"), L"Qt5ClipboardView",
                           qClipboardViewerWndProc, WS_OVERLAPPED);
-    m_nextClipboardViewer = SetClipboardViewer(m_clipboardViewer);
 
-    qCDebug(lcQpaMime) << __FUNCTION__ << "m_clipboardViewer: " << m_clipboardViewer << "next: " << m_nextClipboardViewer;
+    // Try format listener API (Vista onwards) first.
+    if (QWindowsContext::user32dll.addClipboardFormatListener && QWindowsContext::user32dll.removeClipboardFormatListener) {
+        m_formatListenerRegistered = QWindowsContext::user32dll.addClipboardFormatListener(m_clipboardViewer);
+        if (!m_formatListenerRegistered)
+            qErrnoWarning("AddClipboardFormatListener() failed.");
+    }
+
+    if (!m_formatListenerRegistered)
+        m_nextClipboardViewer = SetClipboardViewer(m_clipboardViewer);
+
+    qCDebug(lcQpaMime) << __FUNCTION__ << "m_clipboardViewer:" << m_clipboardViewer
+        << "format listener:" << m_formatListenerRegistered
+        << "next:" << m_nextClipboardViewer;
 }
 
 void QWindowsClipboard::unregisterViewer()
 {
     if (m_clipboardViewer) {
-        ChangeClipboardChain(m_clipboardViewer, m_nextClipboardViewer);
+        if (m_formatListenerRegistered) {
+            QWindowsContext::user32dll.removeClipboardFormatListener(m_clipboardViewer);
+            m_formatListenerRegistered = false;
+        } else {
+            ChangeClipboardChain(m_clipboardViewer, m_nextClipboardViewer);
+            m_nextClipboardViewer = 0;
+        }
         DestroyWindow(m_clipboardViewer);
-        m_clipboardViewer = m_nextClipboardViewer = 0;
+        m_clipboardViewer = 0;
     }
 }
 
+// ### FIXME: Qt 6: Remove the clipboard chain handling code and make the
+// format listener the default.
+
 static bool isProcessBeingDebugged(HWND hwnd)
 {
     DWORD pid = 0;
@@ -232,6 +244,8 @@ void QWindowsClipboard::propagateClipboardMessage(UINT message, WPARAM wParam, L
 
 bool QWindowsClipboard::clipboardViewerWndProc(HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam, LRESULT *result)
 {
+    enum { wMClipboardUpdate = 0x031D };
+
     *result = 0;
     if (QWindowsContext::verbose)
         qCDebug(lcQpaMime) << __FUNCTION__ << hwnd << message << QWindowsGuiEventDispatcher::windowsMessageName(message);
@@ -246,14 +260,16 @@ bool QWindowsClipboard::clipboardViewerWndProc(HWND hwnd, UINT message, WPARAM w
         }
     }
         return true;
-    case WM_DRAWCLIPBOARD: {
+    case wMClipboardUpdate:  // Clipboard Format listener (Vista onwards)
+    case WM_DRAWCLIPBOARD: { // Clipboard Viewer Chain handling (up to XP)
         const bool owned = ownsClipboard();
         qCDebug(lcQpaMime) << "Clipboard changed owned " << owned;
         emitChanged(QClipboard::Clipboard);
         // clean up the clipboard object if we no longer own the clipboard
         if (!owned && m_data)
             releaseIData();
-        propagateClipboardMessage(message, wParam, lParam);
+        if (!m_formatListenerRegistered)
+            propagateClipboardMessage(message, wParam, lParam);
     }
         return true;
     case WM_DESTROY:
diff --git a/src/plugins/platforms/windows/qwindowsclipboard.h b/src/plugins/platforms/windows/qwindowsclipboard.h
index 30bc0143f4..60615e2ad0 100644
--- a/src/plugins/platforms/windows/qwindowsclipboard.h
+++ b/src/plugins/platforms/windows/qwindowsclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,8 +46,8 @@ class QWindowsClipboardRetrievalMimeData : public QWindowsInternalMimeData {
 public:
 
 protected:
-    virtual IDataObject *retrieveDataObject() const;
-    virtual void releaseDataObject(IDataObject *) const;
+    IDataObject *retrieveDataObject() const Q_DECL_OVERRIDE;
+    void releaseDataObject(IDataObject *) const Q_DECL_OVERRIDE;
 };
 
 class QWindowsClipboard : public QPlatformClipboard
@@ -66,10 +58,10 @@ public:
     void registerViewer(); // Call in initialization, when context is up.
     void cleanup();
 
-    virtual QMimeData *mimeData(QClipboard::Mode mode = QClipboard::Clipboard);
-    virtual void setMimeData(QMimeData *data, QClipboard::Mode mode = QClipboard::Clipboard);
-    virtual bool supportsMode(QClipboard::Mode mode) const;
-    virtual bool ownsMode(QClipboard::Mode mode) const;
+    QMimeData *mimeData(QClipboard::Mode mode = QClipboard::Clipboard) Q_DECL_OVERRIDE;
+    void setMimeData(QMimeData *data, QClipboard::Mode mode = QClipboard::Clipboard) Q_DECL_OVERRIDE;
+    bool supportsMode(QClipboard::Mode mode) const Q_DECL_OVERRIDE;
+    bool ownsMode(QClipboard::Mode mode) const Q_DECL_OVERRIDE;
 
     inline bool clipboardViewerWndProc(HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam, LRESULT *result);
 
@@ -88,6 +80,7 @@ private:
     QWindowsOleDataObject *m_data;
     HWND m_clipboardViewer;
     HWND m_nextClipboardViewer;
+    bool m_formatListenerRegistered;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowscontext.cpp b/src/plugins/platforms/windows/qwindowscontext.cpp
index f2f285f0f6..db48e0ed93 100644
--- a/src/plugins/platforms/windows/qwindowscontext.cpp
+++ b/src/plugins/platforms/windows/qwindowscontext.cpp
@@ -6,36 +6,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,6 +51,7 @@
 #endif
 #include "qwindowsscreen.h"
 #include "qwindowstheme.h"
+#include "qwindowsscaling.h"
 
 #include <QtGui/QWindow>
 #include <qpa/qwindowsysteminterface.h>
@@ -88,9 +81,9 @@ Q_LOGGING_CATEGORY(lcQpaEvents, "qt.qpa.events")
 Q_LOGGING_CATEGORY(lcQpaFonts, "qt.qpa.fonts")
 Q_LOGGING_CATEGORY(lcQpaGl, "qt.qpa.gl")
 Q_LOGGING_CATEGORY(lcQpaMime, "qt.qpa.mime")
-Q_LOGGING_CATEGORY(lcQpaInputMethods, "qt.qpa.inputmethods")
+Q_LOGGING_CATEGORY(lcQpaInputMethods, "qt.qpa.input.methods")
 Q_LOGGING_CATEGORY(lcQpaDialogs, "qt.qpa.dialogs")
-Q_LOGGING_CATEGORY(lcQpaTablet, "qt.qpa.tabletsupport")
+Q_LOGGING_CATEGORY(lcQpaTablet, "qt.qpa.input.tablet")
 Q_LOGGING_CATEGORY(lcQpaAccessibility, "qt.qpa.accessibility")
 
 int QWindowsContext::verbose = 0;
@@ -191,7 +184,8 @@ QWindowsUser32DLL::QWindowsUser32DLL() :
     updateLayeredWindowIndirect(0),
     isHungAppWindow(0),
     registerTouchWindow(0), unregisterTouchWindow(0),
-    getTouchInputInfo(0), closeTouchInputHandle(0), setProcessDPIAware(0)
+    getTouchInputInfo(0), closeTouchInputHandle(0), setProcessDPIAware(0),
+    addClipboardFormatListener(0), removeClipboardFormatListener(0)
 {
 }
 
@@ -207,6 +201,11 @@ void QWindowsUser32DLL::init()
     updateLayeredWindowIndirect = (UpdateLayeredWindowIndirect)(library.resolve("UpdateLayeredWindowIndirect"));
     isHungAppWindow = (IsHungAppWindow)library.resolve("IsHungAppWindow");
     setProcessDPIAware = (SetProcessDPIAware)library.resolve("SetProcessDPIAware");
+
+    if (QSysInfo::windowsVersion() >= QSysInfo::WV_VISTA) {
+        addClipboardFormatListener = (AddClipboardFormatListener)library.resolve("AddClipboardFormatListener");
+        removeClipboardFormatListener = (RemoveClipboardFormatListener)library.resolve("RemoveClipboardFormatListener");
+    }
 }
 
 bool QWindowsUser32DLL::initTouch()
@@ -247,8 +246,26 @@ void QWindowsShell32DLL::init()
     sHGetImageList = (SHGetImageList)library.resolve("SHGetImageList");
 }
 
+QWindowsShcoreDLL::QWindowsShcoreDLL()
+    : getProcessDpiAwareness(0)
+    , setProcessDpiAwareness(0)
+    , getDpiForMonitor(0)
+{
+}
+
+void QWindowsShcoreDLL::init()
+{
+    if (QSysInfo::windowsVersion() < QSysInfo::WV_WINDOWS8_1)
+        return;
+    QSystemLibrary library(QStringLiteral("SHCore"));
+    getProcessDpiAwareness = (GetProcessDpiAwareness)library.resolve("GetProcessDpiAwareness");
+    setProcessDpiAwareness = (SetProcessDpiAwareness)library.resolve("SetProcessDpiAwareness");
+    getDpiForMonitor = (GetDpiForMonitor)library.resolve("GetDpiForMonitor");
+}
+
 QWindowsUser32DLL QWindowsContext::user32dll;
 QWindowsShell32DLL QWindowsContext::shell32dll;
+QWindowsShcoreDLL QWindowsContext::shcoredll;
 
 #endif // !Q_OS_WINCE
 
@@ -299,9 +316,7 @@ QWindowsContextPrivate::QWindowsContextPrivate()
 #ifndef Q_OS_WINCE
     QWindowsContext::user32dll.init();
     QWindowsContext::shell32dll.init();
-    // Ensure metrics functions report correct data, QTBUG-30063.
-    if (QWindowsContext::user32dll.setProcessDPIAware)
-        QWindowsContext::user32dll.setProcessDPIAware();
+    QWindowsContext::shcoredll.init();
 
     if (hasTouchSupport(ver) && QWindowsContext::user32dll.initTouch())
         m_systemInfo |= QWindowsContext::SI_SupportsTouch;
@@ -358,6 +373,25 @@ void QWindowsContext::setTabletAbsoluteRange(int a)
 #endif
 }
 
+void QWindowsContext::setProcessDpiAwareness(QtWindows::ProcessDpiAwareness dpiAwareness)
+{
+#ifndef Q_OS_WINCE
+    qCDebug(lcQpaWindows) << __FUNCTION__ << dpiAwareness;
+    if (QWindowsContext::shcoredll.isValid()) {
+        const HRESULT hr = QWindowsContext::shcoredll.setProcessDpiAwareness(dpiAwareness);
+        if (FAILED(hr))
+            qWarning() << "SetProcessDpiAwareness failed:" << QWindowsContext::comErrorString(hr);
+    } else {
+        if (dpiAwareness != QtWindows::ProcessDpiUnaware && QWindowsContext::user32dll.setProcessDPIAware) {
+            if (!QWindowsContext::user32dll.setProcessDPIAware())
+                qErrnoWarning("SetProcessDPIAware() failed");
+        }
+    }
+#else // !Q_OS_WINCE
+    Q_UNUSED(dpiAwareness)
+#endif
+}
+
 QWindowsContext *QWindowsContext::instance()
 {
     return m_instance;
@@ -419,9 +453,17 @@ QString QWindowsContext::registerWindowClass(const QWindow *w, bool isGL)
         && (type == Qt::Popup || w->property("_q_windowsDropShadow").toBool())) {
         style |= CS_DROPSHADOW;
     }
-    if (type == Qt::Tool || type == Qt::ToolTip || type == Qt::Popup) {
+    switch (type) {
+    case Qt::Tool:
+    case Qt::ToolTip:
+    case Qt::Popup:
         style |= CS_SAVEBITS; // Save/restore background
         icon = false;
+        break;
+    case Qt::Dialog:
+        if (!(flags & Qt::WindowSystemMenuHint))
+            icon = false; // QTBUG-2027, dialogs without system menu.
+        break;
     }
     // Create a unique name for the flag combination
     QString cname = QStringLiteral("Qt5QWindow");
@@ -632,25 +674,54 @@ void QWindowsContext::clearWindowUnderMouse()
     \a parent is the parent window, pass GetDesktopWindow() for top levels.
 */
 
+static inline bool findPlatformWindowHelper(const POINT &screenPoint, unsigned cwexFlags,
+                                            const QWindowsContext *context,
+                                            HWND *hwnd, QWindowsWindow **result)
+{
+    POINT point = screenPoint;
+    ScreenToClient(*hwnd, &point);
+    // Returns parent if inside & none matched.
+#ifndef Q_OS_WINCE
+    const HWND child = ChildWindowFromPointEx(*hwnd, point, cwexFlags);
+#else
+    Q_UNUSED(cwexFlags)
+    const HWND child = ChildWindowFromPoint(*hwnd, point);
+#endif
+    if (!child || child == *hwnd)
+        return false;
+    if (QWindowsWindow *window = context->findPlatformWindow(child)) {
+        *result = window;
+        *hwnd = child;
+        return true;
+    }
+#ifndef Q_OS_WINCE // Does not have  WS_EX_TRANSPARENT .
+    // QTBUG-40555: despite CWP_SKIPINVISIBLE, it is possible to hit on invisible
+    // full screen windows of other applications that have WS_EX_TRANSPARENT set
+    // (for example created by  screen sharing applications). In that case, try to
+    // find a Qt window by searching again with CWP_SKIPTRANSPARENT.
+    // Note that Qt 5 uses WS_EX_TRANSPARENT for Qt::WindowTransparentForInput
+    // as well.
+    if (!(cwexFlags & CWP_SKIPTRANSPARENT)
+        && (GetWindowLongPtr(child, GWL_EXSTYLE) & WS_EX_TRANSPARENT)) {
+        const HWND nonTransparentChild = ChildWindowFromPointEx(*hwnd, point, cwexFlags | CWP_SKIPTRANSPARENT);
+        if (QWindowsWindow *nonTransparentWindow = context->findPlatformWindow(nonTransparentChild)) {
+            *result = nonTransparentWindow;
+            *hwnd = nonTransparentChild;
+            return true;
+        }
+    }
+#endif // !Q_OS_WINCE
+    *hwnd = child;
+    return true;
+}
+
 QWindowsWindow *QWindowsContext::findPlatformWindowAt(HWND parent,
                                                           const QPoint &screenPointIn,
                                                           unsigned cwex_flags) const
 {
     QWindowsWindow *result = 0;
     const POINT screenPoint = { screenPointIn.x(), screenPointIn.y() };
-    while (true) {
-        POINT point = screenPoint;
-        ScreenToClient(parent, &point);
-        // Returns parent if inside & none matched.
-        const HWND child = ChildWindowFromPointEx(parent, point, cwex_flags);
-        if (child && child != parent) {
-            if (QWindowsWindow *window = findPlatformWindow(child))
-                result = window;
-            parent = child;
-        } else {
-            break;
-        }
-    }
+    while (findPlatformWindowHelper(screenPoint, cwex_flags, this, &parent, &result)) {}
     return result;
 }
 
@@ -913,6 +984,7 @@ bool QWindowsContext::windowsProc(HWND hwnd, UINT message,
     case QtWindows::InputMethodKeyEvent:
     case QtWindows::InputMethodKeyDownEvent:
     case QtWindows::KeyboardLayoutChangeEvent:
+    case QtWindows::AppCommandEvent:
 #if !defined(Q_OS_WINCE) && !defined(QT_NO_SESSIONMANAGER)
         return platformSessionManager()->isInteractionBlocked() ? true : d->m_keyMapper.translateKeyEvent(platformWindow->window(), hwnd, msg, result);
 #else
@@ -972,6 +1044,12 @@ bool QWindowsContext::windowsProc(HWND hwnd, UINT message,
     case QtWindows::FocusOutEvent:
         handleFocusEvent(et, platformWindow);
         return true;
+    case QtWindows::ShowEventOnParentRestoring: // QTBUG-40696, prevent Windows from re-showing hidden transient children (dialogs).
+        if (!platformWindow->window()->isVisible()) {
+            *result = 0;
+            return true;
+        }
+        break;
     case QtWindows::HideEvent:
         platformWindow->handleHidden();
         return false;// Indicate transient children should be hidden by windows (SW_PARENTCLOSING)
@@ -1133,7 +1211,9 @@ bool QWindowsContext::handleContextMenuEvent(QWindow *window, const MSG &msg)
         }
     }
 
-    QWindowSystemInterface::handleContextMenuEvent(window, mouseTriggered, pos, globalPos,
+    QWindowSystemInterface::handleContextMenuEvent(window, mouseTriggered,
+                                                   pos / QWindowsScaling::factor(),
+                                                   globalPos / QWindowsScaling::factor(),
                                                    QWindowsKeyMapper::queryKeyboardModifiers());
     return true;
 }
@@ -1161,7 +1241,7 @@ void QWindowsContext::setAsyncExpose(bool value)
 extern "C" LRESULT QT_WIN_CALLBACK qWindowsWndProc(HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
 {
     LRESULT result;
-    const QtWindows::WindowsEventType et = windowsEventType(message, wParam);
+    const QtWindows::WindowsEventType et = windowsEventType(message, wParam, lParam);
     const bool handled = QWindowsContext::instance()->windowsProc(hwnd, message, et, wParam, lParam, &result);
     if (QWindowsContext::verbose > 1 && lcQpaEvents().isDebugEnabled()) {
         if (const char *eventName = QWindowsGuiEventDispatcher::windowsMessageName(message)) {
diff --git a/src/plugins/platforms/windows/qwindowscontext.h b/src/plugins/platforms/windows/qwindowscontext.h
index f5dbd072c7..28202219d6 100644
--- a/src/plugins/platforms/windows/qwindowscontext.h
+++ b/src/plugins/platforms/windows/qwindowscontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -94,6 +86,8 @@ struct QWindowsUser32DLL
     typedef BOOL (WINAPI *UpdateLayeredWindowIndirect)(HWND, const UPDATELAYEREDWINDOWINFO *);
     typedef BOOL (WINAPI *IsHungAppWindow)(HWND);
     typedef BOOL (WINAPI *SetProcessDPIAware)();
+    typedef BOOL (WINAPI *AddClipboardFormatListener)(HWND);
+    typedef BOOL (WINAPI *RemoveClipboardFormatListener)(HWND);
 
     // Functions missing in Q_CC_GNU stub libraries.
     SetLayeredWindowAttributes setLayeredWindowAttributes;
@@ -111,6 +105,10 @@ struct QWindowsUser32DLL
 
     // Windows Vista onwards
     SetProcessDPIAware setProcessDPIAware;
+
+    // Clipboard listeners, Windows Vista onwards
+    AddClipboardFormatListener addClipboardFormatListener;
+    RemoveClipboardFormatListener removeClipboardFormatListener;
 };
 
 struct QWindowsShell32DLL
@@ -126,6 +124,22 @@ struct QWindowsShell32DLL
     SHGetStockIconInfo sHGetStockIconInfo;
     SHGetImageList sHGetImageList;
 };
+
+// Shell scaling library (Windows 8.1 onwards)
+struct QWindowsShcoreDLL {
+    QWindowsShcoreDLL();
+    void init();
+    inline bool isValid() const { return getProcessDpiAwareness && setProcessDpiAwareness && getDpiForMonitor; }
+
+    typedef HRESULT (WINAPI *GetProcessDpiAwareness)(HANDLE,int);
+    typedef HRESULT (WINAPI *SetProcessDpiAwareness)(int);
+    typedef HRESULT (WINAPI *GetDpiForMonitor)(HMONITOR,int,UINT *,UINT *);
+
+    GetProcessDpiAwareness getProcessDpiAwareness;
+    SetProcessDpiAwareness setProcessDpiAwareness;
+    GetDpiForMonitor getDpiForMonitor;
+};
+
 #endif // Q_OS_WINCE
 
 class QWindowsContext
@@ -184,6 +198,7 @@ public:
     void setWindowCreationContext(const QSharedPointer<QWindowCreationContext> &ctx);
 
     void setTabletAbsoluteRange(int a);
+    void setProcessDpiAwareness(QtWindows::ProcessDpiAwareness dpiAwareness);
 
     // Returns a combination of SystemInfoFlags
     unsigned systemInfo() const;
@@ -197,6 +212,7 @@ public:
 #ifndef Q_OS_WINCE
     static QWindowsUser32DLL user32dll;
     static QWindowsShell32DLL shell32dll;
+    static QWindowsShcoreDLL shcoredll;
 #endif
 
     static QByteArray comErrorString(HRESULT hr);
diff --git a/src/plugins/platforms/windows/qwindowscursor.cpp b/src/plugins/platforms/windows/qwindowscursor.cpp
index d8fb104b3c..d2460e0640 100644
--- a/src/plugins/platforms/windows/qwindowscursor.cpp
+++ b/src/plugins/platforms/windows/qwindowscursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 #include "qwindowscontext.h"
 #include "qwindowswindow.h"
 #include "qwindowsscreen.h"
+#include "qwindowsscaling.h"
 
 #include <QtGui/QBitmap>
 #include <QtGui/QImage>
@@ -98,7 +91,7 @@ QWindowsCursorCacheKey::QWindowsCursorCacheKey(const QCursor &c)
     \sa QWindowsWindowCursor
 */
 
-HCURSOR QWindowsCursor::createPixmapCursor(const QPixmap &pixmap, int hotX, int hotY)
+HCURSOR QWindowsCursor::createPixmapCursor(const QPixmap &pixmap, const QPoint &hotSpot)
 {
     HCURSOR cur = 0;
     QBitmap mask = pixmap.mask();
@@ -112,8 +105,8 @@ HCURSOR QWindowsCursor::createPixmapCursor(const QPixmap &pixmap, int hotX, int
 
     ICONINFO ii;
     ii.fIcon     = 0;
-    ii.xHotspot  = hotX;
-    ii.yHotspot  = hotY;
+    ii.xHotspot  = hotSpot.x();
+    ii.yHotspot  = hotSpot.y();
     ii.hbmMask   = im;
     ii.hbmColor  = ic;
 
@@ -124,20 +117,120 @@ HCURSOR QWindowsCursor::createPixmapCursor(const QPixmap &pixmap, int hotX, int
     return cur;
 }
 
-HCURSOR QWindowsCursor::createSystemCursor(const QCursor &c)
+// Create a cursor from image and mask of the format QImage::Format_Mono.
+static HCURSOR createBitmapCursor(const QImage &bbits, const QImage &mbits,
+                                  QPoint hotSpot = QPoint(),
+                                  bool invb = false, bool invm = false)
 {
-    int hx = c.hotSpot().x();
-    int hy = c.hotSpot().y();
-    const Qt::CursorShape cshape = c.shape();
-    if (cshape == Qt::BitmapCursor) {
-        const QPixmap pixmap = c.pixmap();
-        if (!pixmap.isNull())
-            if (const HCURSOR hc = createPixmapCursor(pixmap, hx, hy))
-                return hc;
+    const int width = bbits.width();
+    const int height = bbits.height();
+    if (hotSpot.isNull())
+        hotSpot = QPoint(width / 2, height / 2);
+    const int n = qMax(1, width / 8);
+#if !defined(Q_OS_WINCE)
+    QScopedArrayPointer<uchar> xBits(new uchar[height * n]);
+    QScopedArrayPointer<uchar> xMask(new uchar[height * n]);
+    int x = 0;
+    for (int i = 0; i < height; ++i) {
+        const uchar *bits = bbits.scanLine(i);
+        const uchar *mask = mbits.scanLine(i);
+        for (int j = 0; j < n; ++j) {
+            uchar b = bits[j];
+            uchar m = mask[j];
+            if (invb)
+                b ^= 0xff;
+            if (invm)
+                m ^= 0xff;
+            xBits[x] = ~m;
+            xMask[x] = b ^ m;
+            ++x;
+        }
+    }
+    return CreateCursor(GetModuleHandle(0), hotSpot.x(), hotSpot.y(), width, height,
+                        xBits.data(), xMask.data());
+#elif defined(GWES_ICONCURS) // Q_OS_WINCE
+    // Windows CE only supports fixed cursor size.
+    int sysW = GetSystemMetrics(SM_CXCURSOR);
+    int sysH = GetSystemMetrics(SM_CYCURSOR);
+    int sysN = qMax(1, sysW / 8);
+    uchar* xBits = new uchar[sysH * sysN];
+    uchar* xMask = new uchar[sysH * sysN];
+    int x = 0;
+    for (int i = 0; i < sysH; ++i) {
+        if (i >= height) {
+            memset(&xBits[x] , 255, sysN);
+            memset(&xMask[x] ,   0, sysN);
+            x += sysN;
+        } else {
+            int fillWidth = n > sysN ? sysN : n;
+            const uchar *bits = bbits.scanLine(i);
+            const uchar *mask = mbits.scanLine(i);
+            for (int j = 0; j < fillWidth; ++j) {
+                uchar b = bits[j];
+                uchar m = mask[j];
+                if (invb)
+                    b ^= 0xFF;
+                if (invm)
+                    m ^= 0xFF;
+                xBits[x] = ~m;
+                xMask[x] = b ^ m;
+                ++x;
+            }
+            for (int j = fillWidth; j < sysN; ++j ) {
+                xBits[x] = 255;
+                xMask[x] = 0;
+                ++x;
+            }
+        }
     }
 
-    // Non-standard Windows cursors are created from bitmaps
+    HCURSOR hcurs = CreateCursor(qWinAppInst(), hotSpot.x(), hotSpot.y(), sysW, sysH,
+                                 xBits, xMask);
+    delete [] xBits;
+    delete [] xMask;
+    return hcurs;
+#else
+    Q_UNUSED(n);
+    Q_UNUSED(invm);
+    Q_UNUSED(invb);
+    Q_UNUSED(mbits);
+    return 0;
+#endif
+}
+
+static inline QSize systemCursorSize() { return QSize(GetSystemMetrics(SM_CXCURSOR), GetSystemMetrics(SM_CYCURSOR)); }
+static inline QSize standardCursorSize() { return QSize(32, 32); }
+
+#if defined (Q_OS_WINCE) || defined (QT_NO_IMAGEFORMAT_PNG)
+// Create pixmap cursors from data and scale the image if the cursor size is
+// higher than the standard 32. Note that bitmap cursors as produced by
+// createBitmapCursor() only work for standard sizes (32,48,64...), which does
+// not work when scaling the 16x16 openhand cursor bitmaps to 150% (resulting
+// in a non-standard 24x24 size).
+static QCursor createPixmapCursorFromData(const QSize &systemCursorSize,
+                                          // The cursor size the bitmap is targeted for
+                                          const QSize &bitmapTargetCursorSize,
+                                          // The actual size of the bitmap data
+                                          int bitmapSize, const uchar *bits,
+                                          const uchar *maskBits)
+{
+    QPixmap rawImage = QPixmap::fromImage(QBitmap::fromData(QSize(bitmapSize, bitmapSize), bits).toImage());
+    rawImage.setMask(QBitmap::fromData(QSize(bitmapSize, bitmapSize), maskBits));
+
+    const qreal factor = qreal(systemCursorSize.width()) / qreal(bitmapTargetCursorSize.width());
+    // Scale images if the cursor size is significantly different, starting with 150% where the system cursor
+    // size is 48.
+    if (qAbs(factor - 1.0) > 0.4) {
+        const QTransform transform = QTransform::fromScale(factor, factor);
+        rawImage = rawImage.transformed(transform, Qt::SmoothTransformation);
+    }
+    const QPoint hotSpot(rawImage.width() / 2, rawImage.height() / 2);
+    return QCursor(rawImage, hotSpot.x(), hotSpot.y());
+}
 
+QCursor QWindowsCursor::customCursor(Qt::CursorShape cursorShape)
+{
+    // Non-standard Windows cursors are created from bitmaps
     static const uchar vsplit_bits[] = {
         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -203,171 +296,250 @@ HCURSOR QWindowsCursor::createSystemCursor(const QCursor &c)
         0xf0,0x7f,0xf8,0x7f,0xfc,0x7f,0xfc,0x3f,0xf8,0x3f,0xf0,0x1f,
         0xe0,0x1f,0xe0,0x1f,0x00,0x00,0x00,0x00};
 
-    wchar_t *sh = 0;
-    switch (c.shape()) {                        // map to windows cursor
-    case Qt::ArrowCursor:
-        sh = IDC_ARROW;
-        break;
-    case Qt::UpArrowCursor:
-        sh = IDC_UPARROW;
-        break;
-    case Qt::CrossCursor:
-        sh = IDC_CROSS;
-        break;
-    case Qt::WaitCursor:
-        sh = IDC_WAIT;
-        break;
-    case Qt::IBeamCursor:
-        sh = IDC_IBEAM;
-        break;
-    case Qt::SizeVerCursor:
-        sh = IDC_SIZENS;
-        break;
-    case Qt::SizeHorCursor:
-        sh = IDC_SIZEWE;
-        break;
-    case Qt::SizeBDiagCursor:
-        sh = IDC_SIZENESW;
-        break;
-    case Qt::SizeFDiagCursor:
-        sh = IDC_SIZENWSE;
-        break;
-    case Qt::SizeAllCursor:
-        sh = IDC_SIZEALL;
-        break;
-    case Qt::ForbiddenCursor:
-        sh = IDC_NO;
-        break;
-    case Qt::WhatsThisCursor:
-        sh = IDC_HELP;
-        break;
-    case Qt::BusyCursor:
-        sh = IDC_APPSTARTING;
-        break;
-    case Qt::PointingHandCursor:
-        sh = IDC_HAND;
-        break;
-    case Qt::BlankCursor:
+    static const char * const moveDragCursorXpmC[] = {
+    "11 20 3 1",
+    ".        c None",
+    "a        c #FFFFFF",
+    "X        c #000000", // X11 cursor is traditionally black
+    "aa.........",
+    "aXa........",
+    "aXXa.......",
+    "aXXXa......",
+    "aXXXXa.....",
+    "aXXXXXa....",
+    "aXXXXXXa...",
+    "aXXXXXXXa..",
+    "aXXXXXXXXa.",
+    "aXXXXXXXXXa",
+    "aXXXXXXaaaa",
+    "aXXXaXXa...",
+    "aXXaaXXa...",
+    "aXa..aXXa..",
+    "aa...aXXa..",
+    "a.....aXXa.",
+    "......aXXa.",
+    ".......aXXa",
+    ".......aXXa",
+    "........aa."};
+
+    static const char * const copyDragCursorXpmC[] = {
+    "24 30 3 1",
+    ".        c None",
+    "a        c #000000",
+    "X        c #FFFFFF",
+    "XX......................",
+    "XaX.....................",
+    "XaaX....................",
+    "XaaaX...................",
+    "XaaaaX..................",
+    "XaaaaaX.................",
+    "XaaaaaaX................",
+    "XaaaaaaaX...............",
+    "XaaaaaaaaX..............",
+    "XaaaaaaaaaX.............",
+    "XaaaaaaXXXX.............",
+    "XaaaXaaX................",
+    "XaaXXaaX................",
+    "XaX..XaaX...............",
+    "XX...XaaX...............",
+    "X.....XaaX..............",
+    "......XaaX..............",
+    ".......XaaX.............",
+    ".......XaaX.............",
+    "........XX...aaaaaaaaaaa",
+    ".............aXXXXXXXXXa",
+    ".............aXXXXXXXXXa",
+    ".............aXXXXaXXXXa",
+    ".............aXXXXaXXXXa",
+    ".............aXXaaaaaXXa",
+    ".............aXXXXaXXXXa",
+    ".............aXXXXaXXXXa",
+    ".............aXXXXXXXXXa",
+    ".............aXXXXXXXXXa",
+    ".............aaaaaaaaaaa"};
+
+    static const char * const linkDragCursorXpmC[] = {
+    "24 30 3 1",
+    ".        c None",
+    "a        c #000000",
+    "X        c #FFFFFF",
+    "XX......................",
+    "XaX.....................",
+    "XaaX....................",
+    "XaaaX...................",
+    "XaaaaX..................",
+    "XaaaaaX.................",
+    "XaaaaaaX................",
+    "XaaaaaaaX...............",
+    "XaaaaaaaaX..............",
+    "XaaaaaaaaaX.............",
+    "XaaaaaaXXXX.............",
+    "XaaaXaaX................",
+    "XaaXXaaX................",
+    "XaX..XaaX...............",
+    "XX...XaaX...............",
+    "X.....XaaX..............",
+    "......XaaX..............",
+    ".......XaaX.............",
+    ".......XaaX.............",
+    "........XX...aaaaaaaaaaa",
+    ".............aXXXXXXXXXa",
+    ".............aXXXaaaaXXa",
+    ".............aXXXXaaaXXa",
+    ".............aXXXaaaaXXa",
+    ".............aXXaaaXaXXa",
+    ".............aXXaaXXXXXa",
+    ".............aXXaXXXXXXa",
+    ".............aXXXaXXXXXa",
+    ".............aXXXXXXXXXa",
+    ".............aaaaaaaaaaa"};
+
+    switch (cursorShape) {
     case Qt::SplitVCursor:
+        return createPixmapCursorFromData(systemCursorSize(), standardCursorSize(), 32, vsplit_bits, vsplitm_bits);
     case Qt::SplitHCursor:
+        return createPixmapCursorFromData(systemCursorSize(), standardCursorSize(), 32, hsplit_bits, hsplitm_bits);
     case Qt::OpenHandCursor:
+        return createPixmapCursorFromData(systemCursorSize(), standardCursorSize(), 16, openhand_bits, openhandm_bits);
     case Qt::ClosedHandCursor:
-    case Qt::BitmapCursor: {
-        QImage bbits, mbits;
-        bool invb, invm;
-        if (cshape == Qt::BlankCursor) {
-            bbits = QImage(32, 32, QImage::Format_Mono);
-            bbits.fill(0);                // ignore color table
-            mbits = bbits.copy();
-            hx = hy = 16;
-            invb = invm = false;
-        } else if (cshape == Qt::OpenHandCursor || cshape == Qt::ClosedHandCursor) {
-            bool open = cshape == Qt::OpenHandCursor;
-            QBitmap cb = QBitmap::fromData(QSize(16, 16), open ? openhand_bits : closedhand_bits);
-            QBitmap cm = QBitmap::fromData(QSize(16, 16), open ? openhandm_bits : closedhandm_bits);
-            bbits = cb.toImage().convertToFormat(QImage::Format_Mono);
-            mbits = cm.toImage().convertToFormat(QImage::Format_Mono);
-            hx = hy = 8;
-            invb = invm = false;
-        } else if (cshape == Qt::BitmapCursor) {
-            bbits = c.bitmap()->toImage().convertToFormat(QImage::Format_Mono);
-            mbits = c.mask()->toImage().convertToFormat(QImage::Format_Mono);
-            invb = bbits.colorCount() > 1 && qGray(bbits.color(0)) < qGray(bbits.color(1));
-            invm = mbits.colorCount() > 1 && qGray(mbits.color(0)) < qGray(mbits.color(1));
-        } else { // Qt::SplitVCursor, Qt::SplitHCursor
-            const QBitmap cb = QBitmap::fromData(QSize(32, 32), cshape == Qt::SplitVCursor ? vsplit_bits : hsplit_bits);
-            const QBitmap cm = QBitmap::fromData(QSize(32, 32), cshape == Qt::SplitVCursor ? vsplitm_bits : hsplitm_bits);
-            bbits = cb.toImage().convertToFormat(QImage::Format_Mono);
-            mbits = cm.toImage().convertToFormat(QImage::Format_Mono);
-            hx = hy = 16;
-            invb = invm = false;
-        }
-        const int n = qMax(1, bbits.width() / 8);
-        const int h = bbits.height();
-#if !defined(Q_OS_WINCE)
-        QScopedArrayPointer<uchar> xBits(new uchar[h * n]);
-        QScopedArrayPointer<uchar> xMask(new uchar[h * n]);
-        int x = 0;
-        for (int i = 0; i < h; ++i) {
-            uchar *bits = bbits.scanLine(i);
-            uchar *mask = mbits.scanLine(i);
-            for (int j = 0; j < n; ++j) {
-                uchar b = bits[j];
-                uchar m = mask[j];
-                if (invb)
-                    b ^= 0xff;
-                if (invm)
-                    m ^= 0xff;
-                xBits[x] = ~m;
-                xMask[x] = b ^ m;
-                ++x;
-            }
-        }
-        return CreateCursor(GetModuleHandle(0), hx, hy, bbits.width(), bbits.height(),
-                            xBits.data(), xMask.data());
-#elif defined(GWES_ICONCURS) // Q_WS_WINCE
-        // Windows CE only supports fixed cursor size.
-        int sysW = GetSystemMetrics(SM_CXCURSOR);
-        int sysH = GetSystemMetrics(SM_CYCURSOR);
-        int sysN = qMax(1, sysW / 8);
-        uchar* xBits = new uchar[sysH * sysN];
-        uchar* xMask = new uchar[sysH * sysN];
-        int x = 0;
-        for (int i = 0; i < sysH; ++i) {
-            if (i >= h) {
-                memset(&xBits[x] , 255, sysN);
-                memset(&xMask[x] ,   0, sysN);
-                x += sysN;
-            } else {
-                int fillWidth = n > sysN ? sysN : n;
-                uchar *bits = bbits.scanLine(i);
-                uchar *mask = mbits.scanLine(i);
-                for (int j = 0; j < fillWidth; ++j) {
-                    uchar b = bits[j];
-                    uchar m = mask[j];
-                    if (invb)
-                        b ^= 0xFF;
-                    if (invm)
-                        m ^= 0xFF;
-                    xBits[x] = ~m;
-                    xMask[x] = b ^ m;
-                    ++x;
-                }
-                for (int j = fillWidth; j < sysN; ++j ) {
-                    xBits[x] = 255;
-                    xMask[x] = 0;
-                    ++x;
-                }
-            }
+        return createPixmapCursorFromData(systemCursorSize(), standardCursorSize(), 16, closedhand_bits, closedhandm_bits);
+    case Qt::DragCopyCursor:
+        return QCursor(QPixmap(copyDragCursorXpmC), 0, 0);
+    case Qt::DragMoveCursor:
+        return QCursor(QPixmap(moveDragCursorXpmC), 0, 0);
+    case Qt::DragLinkCursor:
+        return QCursor(QPixmap(linkDragCursorXpmC), 0, 0);
+    }
+
+    return QCursor();
+}
+#else // Q_OS_WINCE || QT_NO_IMAGEFORMAT_PNG
+struct QWindowsCustomPngCursor {
+    Qt::CursorShape shape;
+    int size;
+    const char *fileName;
+    int hotSpotX;
+    int hotSpotY;
+};
+
+QCursor QWindowsCursor::customCursor(Qt::CursorShape cursorShape)
+{
+    static const QWindowsCustomPngCursor pngCursors[] = {
+        { Qt::SplitVCursor, 32, "splitvcursor_32.png", 11, 11 },
+        { Qt::SplitVCursor, 48, "splitvcursor_48.png", 16, 17 },
+        { Qt::SplitVCursor, 64, "splitvcursor_64.png", 22, 22 },
+        { Qt::SplitHCursor, 32, "splithcursor_32.png", 11, 11 },
+        { Qt::SplitHCursor, 48, "splithcursor_48.png", 16, 17 },
+        { Qt::SplitHCursor, 64, "splithcursor_64.png", 22, 22 },
+        { Qt::OpenHandCursor, 32, "openhandcursor_32.png", 10, 12 },
+        { Qt::OpenHandCursor, 48, "openhandcursor_48.png", 15, 16 },
+        { Qt::OpenHandCursor, 64, "openhandcursor_64.png", 20, 24 },
+        { Qt::ClosedHandCursor, 32, "closedhandcursor_32.png", 10, 12 },
+        { Qt::ClosedHandCursor, 48, "closedhandcursor_48.png", 15, 16 },
+        { Qt::ClosedHandCursor, 64, "closedhandcursor_64.png", 20, 24 },
+        { Qt::DragCopyCursor, 32, "dragcopycursor_32.png", 0, 0 },
+        { Qt::DragCopyCursor, 48, "dragcopycursor_48.png", 0, 0 },
+        { Qt::DragCopyCursor, 64, "dragcopycursor_64.png", 0, 0 },
+        { Qt::DragMoveCursor, 32, "dragmovecursor_32.png", 0, 0 },
+        { Qt::DragMoveCursor, 48, "dragmovecursor_48.png", 0, 0 },
+        { Qt::DragMoveCursor, 64, "dragmovecursor_64.png", 0, 0 },
+        { Qt::DragLinkCursor, 32, "draglinkcursor_32.png", 0, 0 },
+        { Qt::DragLinkCursor, 48, "draglinkcursor_48.png", 0, 0 },
+        { Qt::DragLinkCursor, 64, "draglinkcursor_64.png", 0, 0 }
+    };
+
+    const int cursorSize = GetSystemMetrics(SM_CXCURSOR);
+    const QWindowsCustomPngCursor *sEnd = pngCursors + sizeof(pngCursors) / sizeof(pngCursors[0]);
+    const QWindowsCustomPngCursor *bestFit = 0;
+    int sizeDelta = INT_MAX;
+    for (const QWindowsCustomPngCursor *s = pngCursors; s < sEnd; ++s) {
+        if (s->shape != cursorShape)
+            continue;
+        const int currentSizeDelta = qMax(s->size, cursorSize) - qMin(s->size, cursorSize);
+        if (currentSizeDelta < sizeDelta) {
+            bestFit = s;
+            if (currentSizeDelta == 0)
+                break; // Perfect match found
+            sizeDelta = currentSizeDelta;
         }
+    }
 
-        HCURSOR hcurs = CreateCursor(qWinAppInst(), hx, hy, sysW, sysH,
-                                   xBits, xMask);
-        delete [] xBits;
-        delete [] xMask;
-        return hcurs;
-#else
-        Q_UNUSED(n);
-        Q_UNUSED(h);
-        return 0;
-#endif
+    if (!bestFit)
+        return QCursor();
+
+    const QPixmap rawImage(QStringLiteral(":/qt-project.org/windows/cursors/images/") +
+                           QString::fromLatin1(bestFit->fileName));
+    return QCursor(rawImage, bestFit->hotSpotX, bestFit->hotSpotY);
+}
+#endif // Q_OS_WINCE || QT_NO_IMAGEFORMAT_PNG
+
+struct QWindowsStandardCursorMapping {
+    Qt::CursorShape shape;
+    LPCWSTR resource;
+};
 
+HCURSOR QWindowsCursor::createSystemCursor(const QCursor &c)
+{
+    static const QWindowsStandardCursorMapping standardCursors[] = {
+        { Qt::ArrowCursor, IDC_ARROW},
+        { Qt::UpArrowCursor, IDC_UPARROW },
+        { Qt::CrossCursor, IDC_CROSS },
+        { Qt::WaitCursor, IDC_WAIT },
+        { Qt::IBeamCursor, IDC_IBEAM },
+        { Qt::SizeVerCursor, IDC_SIZENS },
+        { Qt::SizeHorCursor, IDC_SIZEWE },
+        { Qt::SizeBDiagCursor, IDC_SIZENESW },
+        { Qt::SizeFDiagCursor, IDC_SIZENWSE },
+        { Qt::SizeAllCursor, IDC_SIZEALL },
+        { Qt::ForbiddenCursor, IDC_NO },
+        { Qt::WhatsThisCursor, IDC_HELP },
+        { Qt::BusyCursor, IDC_APPSTARTING },
+        { Qt::PointingHandCursor, IDC_HAND }
+    };
+
+    const Qt::CursorShape cursorShape = c.shape();
+    switch (cursorShape) {
+    case Qt::BitmapCursor: {
+        const QPixmap pixmap = c.pixmap();
+        if (!pixmap.isNull())
+            return QWindowsCursor::createPixmapCursor(pixmap, c.hotSpot());
+        const QImage bbits = c.bitmap()->toImage().convertToFormat(QImage::Format_Mono);
+        const QImage mbits = c.mask()->toImage().convertToFormat(QImage::Format_Mono);
+        const bool invb = bbits.colorCount() > 1 && qGray(bbits.color(0)) < qGray(bbits.color(1));
+        const bool invm = mbits.colorCount() > 1 && qGray(mbits.color(0)) < qGray(mbits.color(1));
+        return createBitmapCursor(bbits, mbits, c.hotSpot(), invb, invm);
+    }
+    case Qt::BlankCursor: {
+        QImage blank = QImage(systemCursorSize(), QImage::Format_Mono);
+        blank.fill(0); // ignore color table
+        return createBitmapCursor(blank, blank);
     }
+    case Qt::SplitVCursor:
+    case Qt::SplitHCursor:
+    case Qt::OpenHandCursor:
+    case Qt::ClosedHandCursor:
     case Qt::DragCopyCursor:
     case Qt::DragMoveCursor:
-    case Qt::DragLinkCursor: {
-        const QPixmap pixmap = QGuiApplicationPrivate::instance()->getPixmapCursor(cshape);
-        return createPixmapCursor(pixmap, hx, hy);
-    }
+    case Qt::DragLinkCursor:
+        return createSystemCursor(customCursor(cursorShape));
     default:
-        qWarning("%s: Invalid cursor shape %d", __FUNCTION__, cshape);
-        return 0;
+        break;
     }
-#ifdef Q_OS_WINCE
-    return LoadCursor(0, sh);
+
+    // Load available standard cursors from resources
+    const QWindowsStandardCursorMapping *sEnd = standardCursors + sizeof(standardCursors) / sizeof(standardCursors[0]);
+    for (const QWindowsStandardCursorMapping *s = standardCursors; s < sEnd; ++s) {
+        if (s->shape == cursorShape) {
+#ifndef Q_OS_WINCE
+            return (HCURSOR)LoadImage(0, s->resource, IMAGE_CURSOR, 0, 0, LR_DEFAULTSIZE | LR_SHARED);
 #else
-    return (HCURSOR)LoadImage(0, sh, IMAGE_CURSOR, 0, 0, LR_DEFAULTSIZE | LR_SHARED);
+            return LoadCursor(0, s->resource);
 #endif
+        }
+    }
+
+    qWarning("%s: Invalid cursor shape %d", __FUNCTION__, cursorShape);
+    return 0;
 }
 
 /*!
@@ -445,9 +617,15 @@ QWindowsCursor::CursorState QWindowsCursor::cursorState()
     return CursorHidden;
 }
 
+QPoint QWindowsCursor::pos() const
+{
+    return mousePosition() / QWindowsScaling::factor();
+}
+
 void QWindowsCursor::setPos(const QPoint &pos)
 {
-    SetCursorPos(pos.x(), pos.y());
+    const QPoint posDp = pos * QWindowsScaling::factor();
+    SetCursorPos(posDp.x() , posDp.y());
 }
 
 /*!
diff --git a/src/plugins/platforms/windows/qwindowscursor.h b/src/plugins/platforms/windows/qwindowscursor.h
index 31da4e367d..c8e1df3f4d 100644
--- a/src/plugins/platforms/windows/qwindowscursor.h
+++ b/src/plugins/platforms/windows/qwindowscursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -101,12 +93,13 @@ public:
 
     QWindowsCursor() {}
 
-    virtual void changeCursor(QCursor * widgetCursor, QWindow * widget);
-    virtual QPoint pos() const { return mousePosition(); }
-    virtual void setPos(const QPoint &pos);
+    void changeCursor(QCursor * widgetCursor, QWindow * widget) Q_DECL_OVERRIDE;
+    QPoint pos() const Q_DECL_OVERRIDE;
+    void setPos(const QPoint &pos) Q_DECL_OVERRIDE;
 
-    static HCURSOR createPixmapCursor(const QPixmap &pixmap, int hotX, int hotY);
+    static HCURSOR createPixmapCursor(const QPixmap &pixmap, const QPoint &hotSpot);
     static HCURSOR createSystemCursor(const QCursor &c);
+    static QCursor customCursor(Qt::CursorShape cursorShape);
     static QPoint mousePosition();
     static CursorState cursorState();
 
diff --git a/src/plugins/platforms/windows/qwindowsdialoghelpers.cpp b/src/plugins/platforms/windows/qwindowsdialoghelpers.cpp
index f70b5b4e2b..4cbead44c5 100644
--- a/src/plugins/platforms/windows/qwindowsdialoghelpers.cpp
+++ b/src/plugins/platforms/windows/qwindowsdialoghelpers.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1273,7 +1265,6 @@ void QWindowsNativeFileDialogBase::setLabelText(QFileDialogOptions::DialogLabel
 {
     wchar_t *wText = const_cast<wchar_t *>(reinterpret_cast<const wchar_t *>(text.utf16()));
     switch (l) {
-        break;
     case QFileDialogOptions::FileName:
         m_fileDialog->SetFileNameLabel(wText);
         break;
diff --git a/src/plugins/platforms/windows/qwindowsdialoghelpers.h b/src/plugins/platforms/windows/qwindowsdialoghelpers.h
index bcf9f544b5..293701f6c7 100644
--- a/src/plugins/platforms/windows/qwindowsdialoghelpers.h
+++ b/src/plugins/platforms/windows/qwindowsdialoghelpers.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -71,11 +63,11 @@ public:
     typedef QSharedPointer<QWindowsNativeDialogBase> QWindowsNativeDialogBasePtr;
     ~QWindowsDialogHelperBase() { cleanupThread(); }
 
-    virtual void exec();
+    void exec() Q_DECL_OVERRIDE;
     virtual bool show(Qt::WindowFlags windowFlags,
                           Qt::WindowModality windowModality,
                           QWindow *parent);
-    virtual void hide();
+    void hide() Q_DECL_OVERRIDE;
 
     virtual bool supportsNonModalDialog(const QWindow * /* parent */ = 0) const { return true; }
 
diff --git a/src/plugins/platforms/windows/qwindowsdrag.cpp b/src/plugins/platforms/windows/qwindowsdrag.cpp
index 60c3daff23..fce60c3169 100644
--- a/src/plugins/platforms/windows/qwindowsdrag.cpp
+++ b/src/plugins/platforms/windows/qwindowsdrag.cpp
@@ -1,46 +1,39 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qwindowsdrag.h"
 #include "qwindowscontext.h"
+#include "qwindowsscaling.h"
 #ifndef QT_NO_CLIPBOARD
 #  include "qwindowsclipboard.h"
 #endif
@@ -50,13 +43,12 @@
 #include "qwindowswindow.h"
 #include "qwindowsmousehandler.h"
 #include "qwindowscursor.h"
+#include "qwindowsscaling.h"
 
 #include <QtGui/QMouseEvent>
 #include <QtGui/QPixmap>
 #include <QtGui/QPainter>
-#include <QtGui/QPaintDevice>
-#include <QtGui/QBackingStore>
-#include <QtGui/QWindow>
+#include <QtGui/QRasterWindow>
 #include <QtGui/QGuiApplication>
 #include <qpa/qwindowsysteminterface_p.h>
 #include <QtGui/private/qguiapplication_p.h>
@@ -69,146 +61,6 @@
 
 QT_BEGIN_NAMESPACE
 
-// These pixmaps approximate the images in the Windows User Interface Guidelines.
-// XPM
-
-static const char * const moveDragCursorXpmC[] = {
-"11 20 3 1",
-".        c None",
-"a        c #FFFFFF",
-"X        c #000000", // X11 cursor is traditionally black
-"aa.........",
-"aXa........",
-"aXXa.......",
-"aXXXa......",
-"aXXXXa.....",
-"aXXXXXa....",
-"aXXXXXXa...",
-"aXXXXXXXa..",
-"aXXXXXXXXa.",
-"aXXXXXXXXXa",
-"aXXXXXXaaaa",
-"aXXXaXXa...",
-"aXXaaXXa...",
-"aXa..aXXa..",
-"aa...aXXa..",
-"a.....aXXa.",
-"......aXXa.",
-".......aXXa",
-".......aXXa",
-"........aa."};
-
-
-/* XPM */
-static const char * const copyDragCursorXpmC[] = {
-"24 30 3 1",
-".        c None",
-"a        c #000000",
-"X        c #FFFFFF",
-"XX......................",
-"XaX.....................",
-"XaaX....................",
-"XaaaX...................",
-"XaaaaX..................",
-"XaaaaaX.................",
-"XaaaaaaX................",
-"XaaaaaaaX...............",
-"XaaaaaaaaX..............",
-"XaaaaaaaaaX.............",
-"XaaaaaaXXXX.............",
-"XaaaXaaX................",
-"XaaXXaaX................",
-"XaX..XaaX...............",
-"XX...XaaX...............",
-"X.....XaaX..............",
-"......XaaX..............",
-".......XaaX.............",
-".......XaaX.............",
-"........XX...aaaaaaaaaaa",
-".............aXXXXXXXXXa",
-".............aXXXXXXXXXa",
-".............aXXXXaXXXXa",
-".............aXXXXaXXXXa",
-".............aXXaaaaaXXa",
-".............aXXXXaXXXXa",
-".............aXXXXaXXXXa",
-".............aXXXXXXXXXa",
-".............aXXXXXXXXXa",
-".............aaaaaaaaaaa"};
-
-/* XPM */
-static const char * const linkDragCursorXpmC[] = {
-"24 30 3 1",
-".        c None",
-"a        c #000000",
-"X        c #FFFFFF",
-"XX......................",
-"XaX.....................",
-"XaaX....................",
-"XaaaX...................",
-"XaaaaX..................",
-"XaaaaaX.................",
-"XaaaaaaX................",
-"XaaaaaaaX...............",
-"XaaaaaaaaX..............",
-"XaaaaaaaaaX.............",
-"XaaaaaaXXXX.............",
-"XaaaXaaX................",
-"XaaXXaaX................",
-"XaX..XaaX...............",
-"XX...XaaX...............",
-"X.....XaaX..............",
-"......XaaX..............",
-".......XaaX.............",
-".......XaaX.............",
-"........XX...aaaaaaaaaaa",
-".............aXXXXXXXXXa",
-".............aXXXaaaaXXa",
-".............aXXXXaaaXXa",
-".............aXXXaaaaXXa",
-".............aXXaaaXaXXa",
-".............aXXaaXXXXXa",
-".............aXXaXXXXXXa",
-".............aXXXaXXXXXa",
-".............aXXXXXXXXXa",
-".............aaaaaaaaaaa"};
-
-static const char * const ignoreDragCursorXpmC[] = {
-"24 30 3 1",
-".        c None",
-"a        c #000000",
-"X        c #FFFFFF",
-"aa......................",
-"aXa.....................",
-"aXXa....................",
-"aXXXa...................",
-"aXXXXa..................",
-"aXXXXXa.................",
-"aXXXXXXa................",
-"aXXXXXXXa...............",
-"aXXXXXXXXa..............",
-"aXXXXXXXXXa.............",
-"aXXXXXXaaaa.............",
-"aXXXaXXa................",
-"aXXaaXXa................",
-"aXa..aXXa...............",
-"aa...aXXa...............",
-"a.....aXXa..............",
-"......aXXa.....XXXX.....",
-".......aXXa..XXaaaaXX...",
-".......aXXa.XaaaaaaaaX..",
-"........aa.XaaaXXXXaaaX.",
-"...........XaaaaX..XaaX.",
-"..........XaaXaaaX..XaaX",
-"..........XaaXXaaaX.XaaX",
-"..........XaaX.XaaaXXaaX",
-"..........XaaX..XaaaXaaX",
-"...........XaaX..XaaaaX.",
-"...........XaaaXXXXaaaX.",
-"............XaaaaaaaaX..",
-".............XXaaaaXX...",
-"...............XXXX....."};
-
 /*!
     \class QWindowsDragCursorWindow
     \brief A toplevel window showing the drag icon in case of touch drag.
@@ -218,7 +70,7 @@ static const char * const ignoreDragCursorXpmC[] = {
     \ingroup qt-lighthouse-win
 */
 
-class QWindowsDragCursorWindow : public QWindow
+class QWindowsDragCursorWindow : public QRasterWindow
 {
 public:
     explicit QWindowsDragCursorWindow(QWindow *parent = 0);
@@ -226,18 +78,18 @@ public:
     void setPixmap(const QPixmap &p);
 
 protected:
-    void exposeEvent(QExposeEvent *);
+    void paintEvent(QPaintEvent *)
+    {
+        QPainter painter(this);
+        painter.drawPixmap(0, 0, m_pixmap);
+    }
 
 private:
-    void render();
-
-    QBackingStore m_backingStore;
     QPixmap m_pixmap;
 };
 
 QWindowsDragCursorWindow::QWindowsDragCursorWindow(QWindow *parent)
-    : QWindow(parent)
-    , m_backingStore(this)
+    : QRasterWindow(parent)
 {
     QSurfaceFormat windowFormat = format();
     windowFormat.setAlphaBufferSize(8);
@@ -253,31 +105,17 @@ void QWindowsDragCursorWindow::setPixmap(const QPixmap &p)
     if (p.cacheKey() == m_pixmap.cacheKey())
         return;
     const QSize oldSize = m_pixmap.size();
-    const QSize newSize = p.size();
+    QSize newSize = p.size();
     qCDebug(lcQpaMime) << __FUNCTION__ << p.cacheKey() << newSize;
     m_pixmap = p;
     if (oldSize != newSize) {
+        const qreal pixDevicePixelRatio = p.devicePixelRatio();
+        if (pixDevicePixelRatio > 1.0 && qFuzzyCompare(pixDevicePixelRatio, devicePixelRatio()))
+            newSize /= qRound(pixDevicePixelRatio);
         resize(newSize);
-        m_backingStore.resize(newSize);
     }
     if (isVisible())
-        render();
-}
-
-void QWindowsDragCursorWindow::exposeEvent(QExposeEvent *)
-{
-    Q_ASSERT(!m_pixmap.isNull());
-    render();
-}
-
-void QWindowsDragCursorWindow::render()
-{
-    const QRect rect(QPoint(0, 0), m_pixmap.size());
-    m_backingStore.beginPaint(rect);
-    QPainter painter(m_backingStore.paintDevice());
-    painter.drawPixmap(0, 0, m_pixmap);
-    m_backingStore.endPaint();
-    m_backingStore.flush(rect);
+        update();
 }
 
 /*!
@@ -451,12 +289,19 @@ void QWindowsOleDropSource::createCursors()
     const QDrag *drag = m_drag->currentDrag();
     const QPixmap pixmap = drag->pixmap();
     const bool hasPixmap = !pixmap.isNull();
+    const int scaleFactor = QWindowsScaling::factor();
+    const QSize pixmapSizeDp = pixmap.size() * scaleFactor;
+    const bool scalePixmap = hasPixmap
+        && m_mode != TouchDrag // Touch drag: pixmap is shown in a separate QWindow, which will be scaled.
+        && (scaleFactor != 1 && scaleFactor != qRound(pixmap.devicePixelRatio()));
+    const QPixmap drawPixmap = scalePixmap
+        ? pixmap.scaled(pixmapSizeDp, Qt::KeepAspectRatio, Qt::SmoothTransformation) : pixmap;
 
     Qt::DropAction actions[] = { Qt::MoveAction, Qt::CopyAction, Qt::LinkAction, Qt::IgnoreAction };
     int actionCount = int(sizeof(actions) / sizeof(actions[0]));
     if (!hasPixmap)
         --actionCount; // No Qt::IgnoreAction unless pixmap
-    const QPoint hotSpot = drag->hotSpot();
+    const QPoint hotSpot = drag->hotSpot() * scaleFactor;
     for (int cnum = 0; cnum < actionCount; ++cnum) {
         const Qt::DropAction action = actions[cnum];
         QPixmap cursorPixmap = drag->dragCursor(action);
@@ -476,21 +321,20 @@ void QWindowsOleDropSource::createCursors()
 
         if (hasPixmap) {
             const int x1 = qMin(-hotSpot.x(), 0);
-            const int x2 = qMax(pixmap.width() - hotSpot.x(), cursorPixmap.width());
+            const int x2 = qMax(pixmapSizeDp.width() - hotSpot.x(), cursorPixmap.width());
             const int y1 = qMin(-hotSpot.y(), 0);
-            const int y2 = qMax(pixmap.height() - hotSpot.y(), cursorPixmap.height());
+            const int y2 = qMax(pixmapSizeDp.height() - hotSpot.y(), cursorPixmap.height());
             QPixmap newCursor(x2 - x1 + 1, y2 - y1 + 1);
             newCursor.fill(Qt::transparent);
             QPainter p(&newCursor);
-            const QRect srcRect = pixmap.rect();
             const QPoint pmDest = QPoint(qMax(0, -hotSpot.x()), qMax(0, -hotSpot.y()));
-            p.drawPixmap(pmDest, pixmap, srcRect);
+            p.drawPixmap(pmDest, drawPixmap);
             p.drawPixmap(qMax(0, hotSpot.x()),qMax(0, hotSpot.y()), cursorPixmap);
             newPixmap = newCursor;
             newHotSpot = QPoint(qMax(0, hotSpot.x()), qMax(0, hotSpot.y()));
         }
 
-        if (const HCURSOR sysCursor = QWindowsCursor::createPixmapCursor(newPixmap, newHotSpot.x(), newHotSpot.y())) {
+        if (const HCURSOR sysCursor = QWindowsCursor::createPixmapCursor(newPixmap, newHotSpot)) {
             const CursorEntry entry(newPixmap, cacheKey, DragCursorHandlePtr(new DragCursorHandle(sysCursor)), newHotSpot);
             if (it == m_cursors.end())
                 m_cursors.insert(action, entry);
@@ -610,7 +454,7 @@ QWindowsOleDropSource::GiveFeedback(DWORD dwEffect)
             if (!m_touchDragWindow)
                 m_touchDragWindow = new QWindowsDragCursorWindow;
             m_touchDragWindow->setPixmap(e.pixmap);
-            m_touchDragWindow->setFramePosition(QWindowsCursor::mousePosition() - e.hotSpot);
+            m_touchDragWindow->setFramePosition((QWindowsCursor::mousePosition() - e.hotSpot) / QWindowsScaling::factor());
             if (!m_touchDragWindow->isVisible())
                 m_touchDragWindow->show();
             break;
@@ -686,7 +530,9 @@ void QWindowsOleDropTarget::handleDrag(QWindow *window, DWORD grfKeyState,
     QGuiApplicationPrivate::mouse_buttons = QWindowsMouseHandler::keyStateToMouseButtons(grfKeyState);
 
     const QPlatformDragQtResponse response =
-          QWindowSystemInterface::handleDrag(window, windowsDrag->dropData(), m_lastPoint, actions);
+          QWindowSystemInterface::handleDrag(window, windowsDrag->dropData(),
+                                             m_lastPoint / QWindowsScaling::factor(),
+                                             actions);
 
     m_answerRect = response.answerRect();
     const Qt::DropAction action = response.acceptedAction();
@@ -778,7 +624,8 @@ QWindowsOleDropTarget::Drop(LPDATAOBJECT pDataObj, DWORD grfKeyState,
     QWindowsDrag *windowsDrag = QWindowsDrag::instance();
 
     const QPlatformDropQtResponse response =
-        QWindowSystemInterface::handleDrop(m_window, windowsDrag->dropData(), m_lastPoint,
+        QWindowSystemInterface::handleDrop(m_window, windowsDrag->dropData(),
+                                           m_lastPoint / QWindowsScaling::factor(),
                                            translateToQDragDropActions(*pdwEffect));
 
     if (response.isAccepted()) {
@@ -864,22 +711,86 @@ QPixmap QWindowsDrag::defaultCursor(Qt::DropAction action) const
     switch (action) {
     case Qt::CopyAction:
         if (m_copyDragCursor.isNull())
-            m_copyDragCursor = QPixmap(copyDragCursorXpmC);
+            m_copyDragCursor = QWindowsCursor::customCursor(Qt::DragCopyCursor).pixmap();
         return m_copyDragCursor;
     case Qt::TargetMoveAction:
     case Qt::MoveAction:
         if (m_moveDragCursor.isNull())
-            m_moveDragCursor = QPixmap(moveDragCursorXpmC);
+            m_moveDragCursor = QWindowsCursor::customCursor(Qt::DragMoveCursor).pixmap();
         return m_moveDragCursor;
     case Qt::LinkAction:
         if (m_linkDragCursor.isNull())
-            m_linkDragCursor = QPixmap(linkDragCursorXpmC);
+            m_linkDragCursor = QWindowsCursor::customCursor(Qt::DragLinkCursor).pixmap();
         return m_linkDragCursor;
     default:
         break;
     }
-    if (m_ignoreDragCursor.isNull())
+
+    static const char * const ignoreDragCursorXpmC[] = {
+    "24 30 3 1",
+    ".        c None",
+    "a        c #000000",
+    "X        c #FFFFFF",
+    "aa......................",
+    "aXa.....................",
+    "aXXa....................",
+    "aXXXa...................",
+    "aXXXXa..................",
+    "aXXXXXa.................",
+    "aXXXXXXa................",
+    "aXXXXXXXa...............",
+    "aXXXXXXXXa..............",
+    "aXXXXXXXXXa.............",
+    "aXXXXXXaaaa.............",
+    "aXXXaXXa................",
+    "aXXaaXXa................",
+    "aXa..aXXa...............",
+    "aa...aXXa...............",
+    "a.....aXXa..............",
+    "......aXXa.....XXXX.....",
+    ".......aXXa..XXaaaaXX...",
+    ".......aXXa.XaaaaaaaaX..",
+    "........aa.XaaaXXXXaaaX.",
+    "...........XaaaaX..XaaX.",
+    "..........XaaXaaaX..XaaX",
+    "..........XaaXXaaaX.XaaX",
+    "..........XaaX.XaaaXXaaX",
+    "..........XaaX..XaaaXaaX",
+    "...........XaaX..XaaaaX.",
+    "...........XaaaXXXXaaaX.",
+    "............XaaaaaaaaX..",
+    ".............XXaaaaXX...",
+    "...............XXXX....."};
+
+    if (m_ignoreDragCursor.isNull()) {
+#if !defined (Q_OS_WINCE)
+        HCURSOR cursor = LoadCursor(NULL, IDC_NO);
+        ICONINFO iconInfo = {0, 0, 0, 0, 0};
+        GetIconInfo(cursor, &iconInfo);
+        BITMAP bmColor = {0, 0, 0, 0, 0, 0, 0};
+
+        if (iconInfo.hbmColor
+            && GetObject(iconInfo.hbmColor, sizeof(BITMAP), &bmColor)
+            && bmColor.bmWidth == bmColor.bmWidthBytes / 4) {
+            const int colorBitsLength = bmColor.bmHeight * bmColor.bmWidthBytes;
+            uchar *colorBits = new uchar[colorBitsLength];
+            GetBitmapBits(iconInfo.hbmColor, colorBitsLength, colorBits);
+            const QImage colorImage(colorBits, bmColor.bmWidth, bmColor.bmHeight,
+                                    bmColor.bmWidthBytes, QImage::Format_ARGB32);
+
+            m_ignoreDragCursor = QPixmap::fromImage(colorImage);
+            delete [] colorBits;
+        } else {
+            m_ignoreDragCursor = QPixmap(ignoreDragCursorXpmC);
+        }
+
+        DeleteObject(iconInfo.hbmMask);
+        DeleteObject(iconInfo.hbmColor);
+        DestroyCursor(cursor);
+#else // !Q_OS_WINCE
         m_ignoreDragCursor = QPixmap(ignoreDragCursorXpmC);
+#endif // !Q_OS_WINCE
+    }
     return m_ignoreDragCursor;
 }
 
diff --git a/src/plugins/platforms/windows/qwindowsdrag.h b/src/plugins/platforms/windows/qwindowsdrag.h
index 4f758fbf3f..924e37a238 100644
--- a/src/plugins/platforms/windows/qwindowsdrag.h
+++ b/src/plugins/platforms/windows/qwindowsdrag.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,7 +45,7 @@ QT_BEGIN_NAMESPACE
 class QWindowsDropMimeData : public QWindowsInternalMimeData {
 public:
     QWindowsDropMimeData() {}
-    virtual IDataObject *retrieveDataObject() const;
+    IDataObject *retrieveDataObject() const Q_DECL_OVERRIDE;
 };
 
 class QWindowsOleDropTarget : public IDropTarget
@@ -90,9 +82,9 @@ public:
     QWindowsDrag();
     virtual ~QWindowsDrag();
 
-    virtual QMimeData *platformDropData() { return &m_dropData; }
+    QMimeData *platformDropData() Q_DECL_OVERRIDE { return &m_dropData; }
 
-    virtual Qt::DropAction drag(QDrag *drag);
+    Qt::DropAction drag(QDrag *drag) Q_DECL_OVERRIDE;
 
     static QWindowsDrag *instance();
 
diff --git a/src/plugins/platforms/windows/qwindowseglcontext.cpp b/src/plugins/platforms/windows/qwindowseglcontext.cpp
index d5ca06bb3f..3b277c0b5a 100644
--- a/src/plugins/platforms/windows/qwindowseglcontext.cpp
+++ b/src/plugins/platforms/windows/qwindowseglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,7 +38,10 @@
 #include <QtCore/QDebug>
 #include <QtGui/QOpenGLContext>
 
-#include <QtPlatformSupport/private/qeglconvenience_p.h>
+#if defined(QT_OPENGL_ES_2_ANGLE) || defined(QT_OPENGL_DYNAMIC)
+#  define EGL_EGLEXT_PROTOTYPES
+#  include <QtANGLE/EGL/eglext.h>
+#endif
 
 QT_BEGIN_NAMESPACE
 
@@ -54,15 +49,292 @@ QT_BEGIN_NAMESPACE
     \class QWindowsEGLStaticContext
     \brief Static data for QWindowsEGLContext.
 
-    Keeps the display. The class is shared via
-    QSharedPointer in the windows, the contexts
-    and in QWindowsIntegration. The display will
-    be closed if the last instance is deleted.
+    Keeps the display. The class is shared via QSharedPointer in the windows, the
+    contexts and in QWindowsIntegration. The display will be closed if the last instance
+    is deleted.
+
+    No EGL or OpenGL functions are called directly. Instead, they are resolved
+    dynamically. This works even if the plugin links directly to libegl/libglesv2 so
+    there is no need to differentiate between dynamic or Angle-only builds in here.
 
     \internal
     \ingroup qt-lighthouse-win
 */
 
+QWindowsLibEGL QWindowsEGLStaticContext::libEGL;
+QWindowsLibGLESv2 QWindowsEGLStaticContext::libGLESv2;
+
+#ifndef QT_STATIC
+
+#ifdef Q_CC_MINGW
+static void *resolveFunc(HMODULE lib, const char *name)
+{
+    QString baseNameStr = QString::fromLatin1(name);
+    QString nameStr;
+    void *proc = 0;
+
+    // Play nice with 32-bit mingw: Try func first, then func@0, func@4,
+    // func@8, func@12, ..., func@64. The def file does not provide any aliases
+    // in libEGL and libGLESv2 in these builds which results in exporting
+    // function names like eglInitialize@12. This cannot be fixed without
+    // breaking binary compatibility. So be flexible here instead.
+
+    int argSize = -1;
+    while (!proc && argSize <= 64) {
+        nameStr = baseNameStr;
+        if (argSize >= 0)
+            nameStr += QLatin1Char('@') + QString::number(argSize);
+        argSize = argSize < 0 ? 0 : argSize + 4;
+        proc = (void *) ::GetProcAddress(lib, nameStr.toLatin1().constData());
+    }
+    return proc;
+}
+#else
+static void *resolveFunc(HMODULE lib, const char *name)
+{
+# ifndef Q_OS_WINCE
+    return (void *) ::GetProcAddress(lib, name);
+# else
+    return (void *) ::GetProcAddress(lib, (const wchar_t *) QString::fromLatin1(name).utf16());
+# endif // Q_OS_WINCE
+}
+#endif // Q_CC_MINGW
+
+void *QWindowsLibEGL::resolve(const char *name)
+{
+    void *proc = m_lib ? resolveFunc(m_lib, name) : 0;
+    if (!proc)
+        qErrnoWarning(::GetLastError(), "Failed to resolve EGL function %s", name);
+
+    return proc;
+}
+
+#endif // !QT_STATIC
+
+#ifndef QT_STATIC
+#  define RESOLVE(signature, name) signature(resolve( #name ));
+#else
+#  define RESOLVE(signature, name) signature(&::name);
+#endif
+
+bool QWindowsLibEGL::init()
+{
+#ifdef QT_DEBUG
+    const char dllName[] = "libEGLd.dll";
+#else
+    const char dllName[] = "libEGL.dll";
+#endif
+
+    qCDebug(lcQpaGl) << "Qt: Using EGL from" << dllName;
+
+#ifndef QT_STATIC
+    m_lib = ::LoadLibraryW((const wchar_t *) QString::fromLatin1(dllName).utf16());
+    if (!m_lib) {
+        qErrnoWarning(::GetLastError(), "Failed to load %s", dllName);
+        return false;
+    }
+#endif
+
+    eglGetError = RESOLVE((EGLint (EGLAPIENTRY *)(void)), eglGetError);
+    eglGetDisplay = RESOLVE((EGLDisplay (EGLAPIENTRY *)(EGLNativeDisplayType)), eglGetDisplay);
+    eglGetPlatformDisplayEXT = RESOLVE((EGLDisplay (EGLAPIENTRY *)(EGLenum platform, void *native_display, const EGLint *attrib_list)), eglGetPlatformDisplayEXT);
+    eglInitialize = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay, EGLint *, EGLint *)), eglInitialize);
+    eglTerminate = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay)), eglTerminate);
+    eglChooseConfig = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay, const EGLint *, EGLConfig *, EGLint, EGLint *)), eglChooseConfig);
+    eglGetConfigAttrib = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay, EGLConfig, EGLint, EGLint *)), eglGetConfigAttrib);
+    eglCreateWindowSurface = RESOLVE((EGLSurface (EGLAPIENTRY *)(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint *)), eglCreateWindowSurface);
+    eglCreatePbufferSurface = RESOLVE((EGLSurface (EGLAPIENTRY *)(EGLDisplay , EGLConfig, const EGLint *)), eglCreatePbufferSurface);
+    eglDestroySurface = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay , EGLSurface )), eglDestroySurface);
+    eglBindAPI = RESOLVE((EGLBoolean (EGLAPIENTRY * )(EGLenum )), eglBindAPI);
+    eglSwapInterval = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay , EGLint )), eglSwapInterval);
+    eglCreateContext = RESOLVE((EGLContext (EGLAPIENTRY *)(EGLDisplay , EGLConfig , EGLContext , const EGLint *)), eglCreateContext);
+    eglDestroyContext = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay, EGLContext)), eglDestroyContext);
+    eglMakeCurrent  = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay , EGLSurface , EGLSurface , EGLContext )), eglMakeCurrent);
+    eglGetCurrentContext = RESOLVE((EGLContext (EGLAPIENTRY *)(void)), eglGetCurrentContext);
+    eglGetCurrentSurface = RESOLVE((EGLSurface (EGLAPIENTRY *)(EGLint )), eglGetCurrentSurface);
+    eglGetCurrentDisplay = RESOLVE((EGLDisplay (EGLAPIENTRY *)(void)), eglGetCurrentDisplay);
+    eglSwapBuffers = RESOLVE((EGLBoolean (EGLAPIENTRY *)(EGLDisplay , EGLSurface)), eglSwapBuffers);
+    eglGetProcAddress = RESOLVE((__eglMustCastToProperFunctionPointerType (EGLAPIENTRY * )(const char *)), eglGetProcAddress);
+
+    return eglGetError && eglGetDisplay && eglInitialize;
+}
+
+#ifndef QT_STATIC
+void *QWindowsLibGLESv2::resolve(const char *name)
+{
+    void *proc = m_lib ? resolveFunc(m_lib, name) : 0;
+    if (!proc)
+        qWarning() << "Failed to resolve OpenGL ES function" << name;
+
+    return proc;
+}
+#endif // !QT_STATIC
+
+bool QWindowsLibGLESv2::init()
+{
+#ifdef QT_DEBUG
+    const char dllName[] = "libGLESv2d.dll";
+#else
+    const char dllName[] = "libGLESv2.dll";
+#endif
+
+    qCDebug(lcQpaGl) << "Qt: Using OpenGL ES 2.0 from" << dllName;
+#ifndef QT_STATIC
+    m_lib = ::LoadLibraryW((const wchar_t *) QString::fromLatin1(dllName).utf16());
+    if (!m_lib) {
+        qErrnoWarning(::GetLastError(), "Failed to load %s", dllName);
+        return false;
+    }
+#endif // !QT_STATIC
+
+    glBindTexture = RESOLVE((void (APIENTRY *)(GLenum , GLuint )), glBindTexture);
+    glBlendFunc = RESOLVE((void (APIENTRY *)(GLenum , GLenum )), glBlendFunc);
+    glClear = RESOLVE((void (APIENTRY *)(GLbitfield )), glClear);
+    glClearColor = RESOLVE((void (APIENTRY *)(GLfloat , GLfloat , GLfloat , GLfloat )), glClearColor);
+    glClearStencil = RESOLVE((void (APIENTRY *)(GLint )), glClearStencil);
+    glColorMask = RESOLVE((void (APIENTRY *)(GLboolean , GLboolean , GLboolean , GLboolean )), glColorMask);
+    glCopyTexImage2D = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLenum , GLint , GLint , GLsizei , GLsizei , GLint )), glCopyTexImage2D);
+    glCopyTexSubImage2D = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLint , GLint , GLint , GLint , GLsizei , GLsizei )), glCopyTexSubImage2D);
+    glCullFace = RESOLVE((void (APIENTRY *)(GLenum )), glCullFace);
+    glDeleteTextures = RESOLVE((void (APIENTRY *)(GLsizei , const GLuint *)), glDeleteTextures);
+    glDepthFunc = RESOLVE((void (APIENTRY *)(GLenum )), glDepthFunc);
+    glDepthMask = RESOLVE((void (APIENTRY *)(GLboolean )), glDepthMask);
+    glDisable = RESOLVE((void (APIENTRY *)(GLenum )), glDisable);
+    glDrawArrays = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLsizei )), glDrawArrays);
+    glDrawElements = RESOLVE((void (APIENTRY *)(GLenum , GLsizei , GLenum , const GLvoid *)), glDrawElements);
+    glEnable = RESOLVE((void (APIENTRY *)(GLenum )), glEnable);
+    glFinish = RESOLVE((void (APIENTRY *)()), glFinish);
+    glFlush = RESOLVE((void (APIENTRY *)()), glFlush);
+    glFrontFace = RESOLVE((void (APIENTRY *)(GLenum )), glFrontFace);
+    glGenTextures = RESOLVE((void (APIENTRY *)(GLsizei , GLuint *)), glGenTextures);
+    glGetBooleanv = RESOLVE((void (APIENTRY *)(GLenum , GLboolean *)), glGetBooleanv);
+    glGetError = RESOLVE((GLenum (APIENTRY *)()), glGetError);
+    glGetFloatv = RESOLVE((void (APIENTRY *)(GLenum , GLfloat *)), glGetFloatv);
+    glGetIntegerv = RESOLVE((void (APIENTRY *)(GLenum , GLint *)), glGetIntegerv);
+    glGetString = RESOLVE((const GLubyte * (APIENTRY *)(GLenum )), glGetString);
+    glGetTexParameterfv = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLfloat *)), glGetTexParameterfv);
+    glGetTexParameteriv = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLint *)), glGetTexParameteriv);
+    glHint = RESOLVE((void (APIENTRY *)(GLenum , GLenum )), glHint);
+    glIsEnabled = RESOLVE((GLboolean (APIENTRY *)(GLenum )), glIsEnabled);
+    glIsTexture = RESOLVE((GLboolean (APIENTRY *)(GLuint )), glIsTexture);
+    glLineWidth = RESOLVE((void (APIENTRY *)(GLfloat )), glLineWidth);
+    glPixelStorei = RESOLVE((void (APIENTRY *)(GLenum , GLint )), glPixelStorei);
+    glPolygonOffset = RESOLVE((void (APIENTRY *)(GLfloat , GLfloat )), glPolygonOffset);
+    glReadPixels = RESOLVE((void (APIENTRY *)(GLint , GLint , GLsizei , GLsizei , GLenum , GLenum , GLvoid *)), glReadPixels);
+    glScissor = RESOLVE((void (APIENTRY *)(GLint , GLint , GLsizei , GLsizei )), glScissor);
+    glStencilFunc = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLuint )), glStencilFunc);
+    glStencilMask = RESOLVE((void (APIENTRY *)(GLuint )), glStencilMask);
+    glStencilOp = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLenum )), glStencilOp);
+    glTexImage2D = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLint , GLsizei , GLsizei , GLint , GLenum , GLenum , const GLvoid *)), glTexImage2D);
+    glTexParameterf = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLfloat )), glTexParameterf);
+    glTexParameterfv = RESOLVE((void (APIENTRY *)(GLenum , GLenum , const GLfloat *)), glTexParameterfv);
+    glTexParameteri = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLint )), glTexParameteri);
+    glTexParameteriv = RESOLVE((void (APIENTRY *)(GLenum , GLenum , const GLint *)), glTexParameteriv);
+    glTexSubImage2D = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLint , GLint , GLsizei , GLsizei , GLenum , GLenum , const GLvoid *)), glTexSubImage2D);
+    glViewport = RESOLVE((void (APIENTRY *)(GLint , GLint , GLsizei , GLsizei )), glViewport);
+
+    glActiveTexture = RESOLVE((void (APIENTRY *)(GLenum)), glActiveTexture);
+    glAttachShader = RESOLVE((void (APIENTRY *)(GLuint , GLuint )), glAttachShader);
+    glBindAttribLocation = RESOLVE((void (APIENTRY *)(GLuint , GLuint , const GLchar* )), glBindAttribLocation);
+    glBindBuffer = RESOLVE((void (APIENTRY *)(GLenum , GLuint )), glBindBuffer);
+    glBindFramebuffer = RESOLVE((void (APIENTRY *)(GLenum , GLuint )), glBindFramebuffer);
+    glBindRenderbuffer = RESOLVE((void (APIENTRY *)(GLenum , GLuint )), glBindRenderbuffer);
+    glBlendColor = RESOLVE((void (APIENTRY *)(GLclampf , GLclampf , GLclampf , GLclampf )), glBlendColor);
+    glBlendEquation = RESOLVE((void (APIENTRY *)(GLenum )), glBlendEquation);
+    glBlendEquationSeparate = RESOLVE((void (APIENTRY *)(GLenum , GLenum )), glBlendEquationSeparate);
+    glBlendFuncSeparate = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLenum , GLenum )), glBlendFuncSeparate);
+    glBufferData = RESOLVE((void (APIENTRY *)(GLenum , qopengl_GLsizeiptr , const GLvoid* , GLenum )), glBufferData);
+    glBufferSubData = RESOLVE((void (APIENTRY *)(GLenum , qopengl_GLintptr , qopengl_GLsizeiptr , const GLvoid* )), glBufferSubData);
+    glCheckFramebufferStatus = RESOLVE((GLenum (APIENTRY *)(GLenum )), glCheckFramebufferStatus);
+    glCompileShader = RESOLVE((void (APIENTRY *)(GLuint )), glCompileShader);
+    glCompressedTexImage2D = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLenum , GLsizei , GLsizei, GLint, GLsizei, const GLvoid* )), glCompressedTexImage2D);
+    glCompressedTexSubImage2D = RESOLVE((void (APIENTRY *)(GLenum , GLint , GLint , GLint, GLsizei, GLsizei, GLenum, GLsizei, const GLvoid* )), glCompressedTexSubImage2D);
+    glCreateProgram = RESOLVE((GLuint (APIENTRY *)(void)), glCreateProgram);
+    glCreateShader = RESOLVE((GLuint (APIENTRY *)(GLenum )), glCreateShader);
+    glDeleteBuffers = RESOLVE((void (APIENTRY *)(GLsizei , const GLuint*)), glDeleteBuffers);
+    glDeleteFramebuffers = RESOLVE((void (APIENTRY *)(GLsizei , const GLuint* )), glDeleteFramebuffers);
+    glDeleteProgram = RESOLVE((void (APIENTRY *)(GLuint )), glDeleteProgram);
+    glDeleteRenderbuffers = RESOLVE((void (APIENTRY *)(GLsizei , const GLuint* )), glDeleteRenderbuffers);
+    glDeleteShader = RESOLVE((void (APIENTRY *)(GLuint )), glDeleteShader);
+    glDetachShader = RESOLVE((void (APIENTRY *)(GLuint , GLuint )), glDetachShader);
+    glDisableVertexAttribArray = RESOLVE((void (APIENTRY *)(GLuint )), glDisableVertexAttribArray);
+    glEnableVertexAttribArray = RESOLVE((void (APIENTRY *)(GLuint )), glEnableVertexAttribArray);
+    glFramebufferRenderbuffer = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLenum , GLuint )), glFramebufferRenderbuffer);
+    glFramebufferTexture2D = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLenum , GLuint , GLint )), glFramebufferTexture2D);
+    glGenBuffers = RESOLVE((void (APIENTRY *)(GLsizei , GLuint* )), glGenBuffers);
+    glGenerateMipmap = RESOLVE((void (APIENTRY *)(GLenum )), glGenerateMipmap);
+    glGenFramebuffers = RESOLVE((void (APIENTRY *)(GLsizei , GLuint* )), glGenFramebuffers);
+    glGenRenderbuffers = RESOLVE((void (APIENTRY *)(GLsizei , GLuint* )), glGenRenderbuffers);
+    glGetActiveAttrib = RESOLVE((void (APIENTRY *)(GLuint , GLuint , GLsizei , GLsizei* , GLint* , GLenum* , GLchar* )), glGetActiveAttrib);
+    glGetActiveUniform = RESOLVE((void (APIENTRY *)(GLuint , GLuint , GLsizei , GLsizei* , GLint* , GLenum* , GLchar* )), glGetActiveUniform);
+    glGetAttachedShaders = RESOLVE((void (APIENTRY *)(GLuint , GLsizei , GLsizei*, GLuint* )), glGetAttachedShaders);
+    glGetAttribLocation = RESOLVE((int (APIENTRY *)(GLuint , const GLchar* )), glGetAttribLocation);
+    glGetBufferParameteriv = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLint* )), glGetBufferParameteriv);
+    glGetFramebufferAttachmentParameteriv = RESOLVE((void (APIENTRY *)(GLenum , GLenum, GLenum , GLint* )), glGetFramebufferAttachmentParameteriv);
+    glGetProgramiv = RESOLVE((void (APIENTRY *)(GLuint , GLenum , GLint* )), glGetProgramiv);
+    glGetProgramInfoLog = RESOLVE((void (APIENTRY *)(GLuint , GLsizei , GLsizei* , GLchar* )), glGetProgramInfoLog);
+    glGetRenderbufferParameteriv = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLint* )), glGetRenderbufferParameteriv);
+    glGetShaderiv = RESOLVE((void (APIENTRY *)(GLuint , GLenum , GLint* )), glGetShaderiv);
+    glGetShaderInfoLog = RESOLVE((void (APIENTRY *)(GLuint , GLsizei , GLsizei*, GLchar*)), glGetShaderInfoLog);
+    glGetShaderPrecisionFormat = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLint* , GLint* )), glGetShaderPrecisionFormat);
+    glGetShaderSource = RESOLVE((void (APIENTRY *)(GLuint , GLsizei , GLsizei* , GLchar* )), glGetShaderSource);
+    glGetUniformfv = RESOLVE((void (APIENTRY *)(GLuint , GLint , GLfloat*)), glGetUniformfv);
+    glGetUniformiv = RESOLVE((void (APIENTRY *)(GLuint , GLint , GLint*)), glGetUniformiv);
+    glGetUniformLocation = RESOLVE((int (APIENTRY *)(GLuint , const GLchar* )), glGetUniformLocation);
+    glGetVertexAttribfv = RESOLVE((void (APIENTRY *)(GLuint , GLenum , GLfloat* )), glGetVertexAttribfv);
+    glGetVertexAttribiv = RESOLVE((void (APIENTRY *)(GLuint , GLenum , GLint* )), glGetVertexAttribiv);
+    glGetVertexAttribPointerv = RESOLVE((void (APIENTRY *)(GLuint , GLenum , GLvoid** pointer)), glGetVertexAttribPointerv);
+    glIsBuffer = RESOLVE((GLboolean (APIENTRY *)(GLuint )), glIsBuffer);
+    glIsFramebuffer = RESOLVE((GLboolean (APIENTRY *)(GLuint )), glIsFramebuffer);
+    glIsProgram = RESOLVE((GLboolean (APIENTRY *)(GLuint )), glIsProgram);
+    glIsRenderbuffer = RESOLVE((GLboolean (APIENTRY *)(GLuint )), glIsRenderbuffer);
+    glIsShader = RESOLVE((GLboolean (APIENTRY *)(GLuint )), glIsShader);
+    glLinkProgram = RESOLVE((void (APIENTRY *)(GLuint )), glLinkProgram);
+    glReleaseShaderCompiler = RESOLVE((void (APIENTRY *)(void)), glReleaseShaderCompiler);
+    glRenderbufferStorage = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLsizei , GLsizei )), glRenderbufferStorage);
+    glSampleCoverage = RESOLVE((void (APIENTRY *)(GLclampf , GLboolean )), glSampleCoverage);
+    glShaderBinary = RESOLVE((void (APIENTRY *)(GLsizei , const GLuint*, GLenum , const GLvoid* , GLsizei )), glShaderBinary);
+    glShaderSource = RESOLVE((void (APIENTRY *)(GLuint , GLsizei , const GLchar* *, const GLint* )), glShaderSource);
+    glStencilFuncSeparate = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLint , GLuint )), glStencilFuncSeparate);
+    glStencilMaskSeparate = RESOLVE((void (APIENTRY *)(GLenum , GLuint )), glStencilMaskSeparate);
+    glStencilOpSeparate = RESOLVE((void (APIENTRY *)(GLenum , GLenum , GLenum , GLenum )), glStencilOpSeparate);
+    glUniform1f = RESOLVE((void (APIENTRY *)(GLint , GLfloat )), glUniform1f);
+    glUniform1fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLfloat* )), glUniform1fv);
+    glUniform1i = RESOLVE((void (APIENTRY *)(GLint , GLint )), glUniform1i);
+    glUniform1iv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLint* )), glUniform1iv);
+    glUniform2f = RESOLVE((void (APIENTRY *)(GLint , GLfloat , GLfloat )), glUniform2f);
+    glUniform2fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLfloat* )), glUniform2fv);
+    glUniform2i = RESOLVE((void (APIENTRY *)(GLint , GLint , GLint )), glUniform2i);
+    glUniform2iv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLint* )), glUniform2iv);
+    glUniform3f = RESOLVE((void (APIENTRY *)(GLint , GLfloat , GLfloat , GLfloat )), glUniform3f);
+    glUniform3fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLfloat* )), glUniform3fv);
+    glUniform3i = RESOLVE((void (APIENTRY *)(GLint , GLint , GLint , GLint )), glUniform3i);
+    glUniform3iv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLint* )), glUniform3iv);
+    glUniform4f = RESOLVE((void (APIENTRY *)(GLint , GLfloat , GLfloat , GLfloat , GLfloat )), glUniform4f);
+    glUniform4fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLfloat* )), glUniform4fv);
+    glUniform4i = RESOLVE((void (APIENTRY *)(GLint , GLint , GLint , GLint , GLint )), glUniform4i);
+    glUniform4iv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , const GLint* )), glUniform4iv);
+    glUniformMatrix2fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , GLboolean , const GLfloat* )), glUniformMatrix2fv);
+    glUniformMatrix3fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , GLboolean , const GLfloat* )), glUniformMatrix3fv);
+    glUniformMatrix4fv = RESOLVE((void (APIENTRY *)(GLint , GLsizei , GLboolean , const GLfloat* )), glUniformMatrix4fv);
+    glUseProgram = RESOLVE((void (APIENTRY *)(GLuint )), glUseProgram);
+    glValidateProgram = RESOLVE((void (APIENTRY *)(GLuint )), glValidateProgram);
+    glVertexAttrib1f = RESOLVE((void (APIENTRY *)(GLuint , GLfloat )), glVertexAttrib1f);
+    glVertexAttrib1fv = RESOLVE((void (APIENTRY *)(GLuint , const GLfloat* )), glVertexAttrib1fv);
+    glVertexAttrib2f = RESOLVE((void (APIENTRY *)(GLuint , GLfloat , GLfloat )), glVertexAttrib2f);
+    glVertexAttrib2fv = RESOLVE((void (APIENTRY *)(GLuint , const GLfloat* )), glVertexAttrib2fv);
+    glVertexAttrib3f = RESOLVE((void (APIENTRY *)(GLuint , GLfloat , GLfloat , GLfloat )), glVertexAttrib3f);
+    glVertexAttrib3fv = RESOLVE((void (APIENTRY *)(GLuint , const GLfloat* )), glVertexAttrib3fv);
+    glVertexAttrib4f = RESOLVE((void (APIENTRY *)(GLuint , GLfloat , GLfloat , GLfloat , GLfloat )), glVertexAttrib4f);
+    glVertexAttrib4fv = RESOLVE((void (APIENTRY *)(GLuint , const GLfloat* )), glVertexAttrib4fv);
+    glVertexAttribPointer = RESOLVE((void (APIENTRY *)(GLuint , GLint, GLenum, GLboolean, GLsizei, const GLvoid* )), glVertexAttribPointer);
+
+    glClearDepthf = RESOLVE((void (APIENTRY *)(GLclampf )), glClearDepthf);
+    glDepthRangef = RESOLVE((void (APIENTRY *)(GLclampf , GLclampf )), glDepthRangef);
+
+    return glBindTexture && glCreateShader && glClearDepthf;
+}
+
 QWindowsEGLStaticContext::QWindowsEGLStaticContext(EGLDisplay display, int version)
     : m_display(display), m_version(version)
 {
@@ -76,7 +348,40 @@ QWindowsEGLStaticContext *QWindowsEGLStaticContext::create()
         return 0;
     }
 
-    EGLDisplay display = eglGetDisplay((EGLNativeDisplayType)dc);
+    if (!libEGL.init()) {
+        qWarning("%s: Failed to load and resolve libEGL functions", Q_FUNC_INFO);
+        return 0;
+    }
+    if (!libGLESv2.init()) {
+        qWarning("%s: Failed to load and resolve libGLESv2 functions", Q_FUNC_INFO);
+        return 0;
+    }
+
+    EGLDisplay display = EGL_NO_DISPLAY;
+#ifdef EGL_ANGLE_platform_angle_opengl
+    if (libEGL.eglGetPlatformDisplayEXT && qEnvironmentVariableIsSet("QT_ANGLE_PLATFORM")) {
+        const EGLint anglePlatformAttributes[][3] = {
+            { EGL_PLATFORM_ANGLE_TYPE_ANGLE, EGL_PLATFORM_ANGLE_TYPE_D3D11_ANGLE, EGL_NONE },
+            { EGL_PLATFORM_ANGLE_TYPE_ANGLE, EGL_PLATFORM_ANGLE_TYPE_D3D9_ANGLE, EGL_NONE },
+            { EGL_PLATFORM_ANGLE_TYPE_ANGLE, EGL_PLATFORM_ANGLE_TYPE_D3D11_WARP_ANGLE, EGL_NONE }
+        };
+        const EGLint *attributes = 0;
+        const QByteArray anglePlatform = qgetenv("QT_ANGLE_PLATFORM");
+        if (anglePlatform == "d3d11")
+            attributes = anglePlatformAttributes[0];
+        else if (anglePlatform == "d3d9")
+            attributes = anglePlatformAttributes[1];
+        else if (anglePlatform == "warp")
+            attributes = anglePlatformAttributes[2];
+        else
+            qCWarning(lcQpaGl) << "Invalid value set for QT_ANGLE_PLATFORM:" << anglePlatform;
+
+        if (attributes)
+            display = libEGL.eglGetPlatformDisplayEXT(EGL_PLATFORM_ANGLE_ANGLE, dc, attributes);
+    }
+#endif // EGL_ANGLE_platform_angle_opengl
+    if (display == EGL_NO_DISPLAY)
+        display = libEGL.eglGetDisplay((EGLNativeDisplayType)dc);
     if (!display) {
         qWarning("%s: Could not obtain EGL display", Q_FUNC_INFO);
         return 0;
@@ -84,9 +389,11 @@ QWindowsEGLStaticContext *QWindowsEGLStaticContext::create()
 
     EGLint major;
     EGLint minor;
-    if (!eglInitialize(display, &major, &minor)) {
-        qWarning("%s: Could not initialize egl display: error %d\n",
-                 Q_FUNC_INFO, eglGetError());
+    if (!libEGL.eglInitialize(display, &major, &minor)) {
+        int err = libEGL.eglGetError();
+        qWarning("%s: Could not initialize EGL display: error 0x%x\n", Q_FUNC_INFO, err);
+        if (err == 0x3001)
+            qWarning("%s: When using ANGLE, check if d3dcompiler_4x.dll is available", Q_FUNC_INFO);
         return 0;
     }
 
@@ -97,7 +404,70 @@ QWindowsEGLStaticContext *QWindowsEGLStaticContext::create()
 QWindowsEGLStaticContext::~QWindowsEGLStaticContext()
 {
     qCDebug(lcQpaGl) << __FUNCTION__ << "Releasing EGL display " << m_display;
-    eglTerminate(m_display);
+    libEGL.eglTerminate(m_display);
+}
+
+QWindowsOpenGLContext *QWindowsEGLStaticContext::createContext(QOpenGLContext *context)
+{
+    return new QWindowsEGLContext(this, context->format(), context->shareHandle());
+}
+
+void *QWindowsEGLStaticContext::createWindowSurface(void *nativeWindow, void *nativeConfig)
+{
+    EGLSurface surface = libEGL.eglCreateWindowSurface(m_display, (EGLConfig) nativeConfig,
+                                                       (EGLNativeWindowType) nativeWindow, 0);
+    if (surface == EGL_NO_SURFACE)
+        qWarning("%s: Could not create the EGL window surface: 0x%x\n", Q_FUNC_INFO, libEGL.eglGetError());
+
+    return surface;
+}
+
+void QWindowsEGLStaticContext::destroyWindowSurface(void *nativeSurface)
+{
+    libEGL.eglDestroySurface(m_display, (EGLSurface) nativeSurface);
+}
+
+QSurfaceFormat QWindowsEGLStaticContext::formatFromConfig(EGLDisplay display, EGLConfig config,
+                                                          const QSurfaceFormat &referenceFormat)
+{
+    QSurfaceFormat format;
+    EGLint redSize     = 0;
+    EGLint greenSize   = 0;
+    EGLint blueSize    = 0;
+    EGLint alphaSize   = 0;
+    EGLint depthSize   = 0;
+    EGLint stencilSize = 0;
+    EGLint sampleCount = 0;
+
+    libEGL.eglGetConfigAttrib(display, config, EGL_RED_SIZE,     &redSize);
+    libEGL.eglGetConfigAttrib(display, config, EGL_GREEN_SIZE,   &greenSize);
+    libEGL.eglGetConfigAttrib(display, config, EGL_BLUE_SIZE,    &blueSize);
+    libEGL.eglGetConfigAttrib(display, config, EGL_ALPHA_SIZE,   &alphaSize);
+    libEGL.eglGetConfigAttrib(display, config, EGL_DEPTH_SIZE,   &depthSize);
+    libEGL.eglGetConfigAttrib(display, config, EGL_STENCIL_SIZE, &stencilSize);
+    libEGL.eglGetConfigAttrib(display, config, EGL_SAMPLES,      &sampleCount);
+
+    format.setRenderableType(QSurfaceFormat::OpenGLES);
+    format.setVersion(referenceFormat.majorVersion(), referenceFormat.minorVersion());
+    format.setProfile(referenceFormat.profile());
+    format.setOptions(referenceFormat.options());
+
+    format.setRedBufferSize(redSize);
+    format.setGreenBufferSize(greenSize);
+    format.setBlueBufferSize(blueSize);
+    format.setAlphaBufferSize(alphaSize);
+    format.setDepthBufferSize(depthSize);
+    format.setStencilBufferSize(stencilSize);
+    format.setSamples(sampleCount);
+    format.setStereo(false);
+    format.setSwapInterval(referenceFormat.swapInterval());
+
+    // Clear the EGL error state because some of the above may
+    // have errored out because the attribute is not applicable
+    // to the surface type.  Such errors don't matter.
+    libEGL.eglGetError();
+
+    return format;
 }
 
 /*!
@@ -121,40 +491,472 @@ QWindowsEGLStaticContext::~QWindowsEGLStaticContext()
     \ingroup qt-lighthouse-win
 */
 
-QWindowsEGLContext::QWindowsEGLContext(const QWindowsEGLStaticContextPtr &staticContext,
+QWindowsEGLContext::QWindowsEGLContext(QWindowsEGLStaticContext *staticContext,
                                        const QSurfaceFormat &format,
                                        QPlatformOpenGLContext *share)
-    : QEGLPlatformContext(format, share, staticContext->display())
-    , m_staticContext(staticContext)
+    : m_staticContext(staticContext)
+    , m_eglDisplay(staticContext->display())
+    , m_api(EGL_OPENGL_ES_API)
+    , m_swapInterval(-1)
 {
+    if (!m_staticContext)
+        return;
+
+    m_eglConfig = chooseConfig(format);
+    m_format = m_staticContext->formatFromConfig(m_eglDisplay, m_eglConfig, format);
+    m_shareContext = share ? static_cast<QWindowsEGLContext *>(share)->m_eglContext : 0;
+
+    QVector<EGLint> contextAttrs;
+    contextAttrs.append(EGL_CONTEXT_CLIENT_VERSION);
+    contextAttrs.append(m_format.majorVersion());
+    contextAttrs.append(EGL_NONE);
+
+    QWindowsEGLStaticContext::libEGL.eglBindAPI(m_api);
+    m_eglContext = QWindowsEGLStaticContext::libEGL.eglCreateContext(m_eglDisplay, m_eglConfig, m_shareContext, contextAttrs.constData());
+    if (m_eglContext == EGL_NO_CONTEXT && m_shareContext != EGL_NO_CONTEXT) {
+        m_shareContext = 0;
+        m_eglContext = QWindowsEGLStaticContext::libEGL.eglCreateContext(m_eglDisplay, m_eglConfig, 0, contextAttrs.constData());
+    }
+
+    if (m_eglContext == EGL_NO_CONTEXT) {
+        qWarning("QWindowsEGLContext: eglError: %x, this: %p \n", QWindowsEGLStaticContext::libEGL.eglGetError(), this);
+        return;
+    }
+
+    // Make the context current to ensure the GL version query works. This needs a surface too.
+    const EGLint pbufferAttributes[] = {
+        EGL_WIDTH, 1,
+        EGL_HEIGHT, 1,
+        EGL_LARGEST_PBUFFER, EGL_FALSE,
+        EGL_NONE
+    };
+    EGLSurface pbuffer = QWindowsEGLStaticContext::libEGL.eglCreatePbufferSurface(m_eglDisplay, m_eglConfig, pbufferAttributes);
+    if (pbuffer == EGL_NO_SURFACE)
+        return;
+
+    EGLDisplay prevDisplay = QWindowsEGLStaticContext::libEGL.eglGetCurrentDisplay();
+    if (prevDisplay == EGL_NO_DISPLAY) // when no context is current
+        prevDisplay = m_eglDisplay;
+    EGLContext prevContext = QWindowsEGLStaticContext::libEGL.eglGetCurrentContext();
+    EGLSurface prevSurfaceDraw = QWindowsEGLStaticContext::libEGL.eglGetCurrentSurface(EGL_DRAW);
+    EGLSurface prevSurfaceRead = QWindowsEGLStaticContext::libEGL.eglGetCurrentSurface(EGL_READ);
+
+    if (QWindowsEGLStaticContext::libEGL.eglMakeCurrent(m_eglDisplay, pbuffer, pbuffer, m_eglContext)) {
+        const GLubyte *s = QWindowsEGLStaticContext::libGLESv2.glGetString(GL_VERSION);
+        if (s) {
+            QByteArray version = QByteArray(reinterpret_cast<const char *>(s));
+            int major, minor;
+            if (QPlatformOpenGLContext::parseOpenGLVersion(version, major, minor)) {
+                m_format.setMajorVersion(major);
+                m_format.setMinorVersion(minor);
+            }
+        }
+        m_format.setProfile(QSurfaceFormat::NoProfile);
+        m_format.setOptions(QSurfaceFormat::FormatOptions());
+        QWindowsEGLStaticContext::libEGL.eglMakeCurrent(prevDisplay, prevSurfaceDraw, prevSurfaceRead, prevContext);
+    }
+    QWindowsEGLStaticContext::libEGL.eglDestroySurface(m_eglDisplay, pbuffer);
 }
 
 QWindowsEGLContext::~QWindowsEGLContext()
 {
+    if (m_eglContext != EGL_NO_CONTEXT) {
+        QWindowsEGLStaticContext::libEGL.eglDestroyContext(m_eglDisplay, m_eglContext);
+        m_eglContext = EGL_NO_CONTEXT;
+    }
 }
 
-bool QWindowsEGLContext::hasThreadedOpenGLCapability()
+bool QWindowsEGLContext::makeCurrent(QPlatformSurface *surface)
 {
-    return false;
+    Q_ASSERT(surface->surface()->supportsOpenGL());
+
+    QWindowsEGLStaticContext::libEGL.eglBindAPI(m_api);
+
+    QWindowsWindow *window = static_cast<QWindowsWindow *>(surface);
+    EGLSurface eglSurface = static_cast<EGLSurface>(window->surface(m_eglConfig));
+    Q_ASSERT(eglSurface);
+
+    // shortcut: on some GPUs, eglMakeCurrent is not a cheap operation
+    if (QWindowsEGLStaticContext::libEGL.eglGetCurrentContext() == m_eglContext &&
+            QWindowsEGLStaticContext::libEGL.eglGetCurrentDisplay() == m_eglDisplay &&
+            QWindowsEGLStaticContext::libEGL.eglGetCurrentSurface(EGL_READ) == eglSurface &&
+            QWindowsEGLStaticContext::libEGL.eglGetCurrentSurface(EGL_DRAW) == eglSurface) {
+        return true;
+    }
+
+    const bool ok = QWindowsEGLStaticContext::libEGL.eglMakeCurrent(m_eglDisplay, eglSurface, eglSurface, m_eglContext);
+    if (ok) {
+        const int requestedSwapInterval = surface->format().swapInterval();
+        if (requestedSwapInterval >= 0 && m_swapInterval != requestedSwapInterval) {
+            m_swapInterval = requestedSwapInterval;
+            QWindowsEGLStaticContext::libEGL.eglSwapInterval(m_staticContext->display(), m_swapInterval);
+        }
+    } else {
+        qWarning("QWindowsEGLContext::makeCurrent: eglError: %x, this: %p \n", QWindowsEGLStaticContext::libEGL.eglGetError(), this);
+    }
+
+    return ok;
 }
 
-EGLSurface QWindowsEGLContext::eglSurfaceForPlatformSurface(QPlatformSurface *surface)
+void QWindowsEGLContext::doneCurrent()
 {
-    const QWindowsWindow *window = static_cast<const QWindowsWindow *>(surface);
-    return window->eglSurfaceHandle();
+    QWindowsEGLStaticContext::libEGL.eglBindAPI(m_api);
+    bool ok = QWindowsEGLStaticContext::libEGL.eglMakeCurrent(m_eglDisplay, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
+    if (!ok)
+        qWarning("QWindowsEGLContext::doneCurrent: eglError: %d, this: %p \n", QWindowsEGLStaticContext::libEGL.eglGetError(), this);
 }
 
-bool QWindowsEGLContext::makeCurrent(QPlatformSurface *surface)
+void QWindowsEGLContext::swapBuffers(QPlatformSurface *surface)
 {
-    bool ok = false;
+    QWindowsEGLStaticContext::libEGL.eglBindAPI(m_api);
     QWindowsWindow *window = static_cast<QWindowsWindow *>(surface);
-    if (EGLSurface eglSurface = window->ensureEglSurfaceHandle(m_staticContext, eglConfig())) {
-        ok = eglMakeCurrent(eglDisplay(), eglSurface, eglSurface, eglContext());
-        if (!ok)
-            qWarning("%s: eglMakeCurrent() failed, eglError: 0x%x, this: %p \n",
-                     Q_FUNC_INFO, eglGetError(), this);
+    EGLSurface eglSurface = static_cast<EGLSurface>(window->surface(m_eglConfig));
+    Q_ASSERT(eglSurface);
+
+    bool ok = QWindowsEGLStaticContext::libEGL.eglSwapBuffers(m_eglDisplay, eglSurface);
+    if (!ok)
+        qWarning("QWindowsEGLContext::swapBuffers: eglError: %d, this: %p \n", QWindowsEGLStaticContext::libEGL.eglGetError(), this);
+}
+
+QFunctionPointer QWindowsEGLContext::getProcAddress(const QByteArray &procName)
+{
+    // We support AllGLFunctionsQueryable, which means this function must be able to
+    // return a function pointer for standard GLES2 functions too. These are not
+    // guaranteed to be queryable via eglGetProcAddress().
+    static struct StdFunc {
+        const char *name;
+        void *func;
+    } standardFuncs[] = {
+        { "glBindTexture", (void *) QWindowsEGLStaticContext::libGLESv2.glBindTexture },
+        { "glBlendFunc", (void *) QWindowsEGLStaticContext::libGLESv2.glBlendFunc },
+        { "glClear", (void *) QWindowsEGLStaticContext::libGLESv2.glClear },
+        { "glClearColor", (void *) QWindowsEGLStaticContext::libGLESv2.glClearColor },
+        { "glClearStencil", (void *) QWindowsEGLStaticContext::libGLESv2.glClearStencil },
+        { "glColorMask", (void *) QWindowsEGLStaticContext::libGLESv2.glColorMask },
+        { "glCopyTexImage2D", (void *) QWindowsEGLStaticContext::libGLESv2.glCopyTexImage2D },
+        { "glCopyTexSubImage2D", (void *) QWindowsEGLStaticContext::libGLESv2.glCopyTexSubImage2D },
+        { "glCullFace", (void *) QWindowsEGLStaticContext::libGLESv2.glCullFace },
+        { "glDeleteTextures", (void *) QWindowsEGLStaticContext::libGLESv2.glDeleteTextures },
+        { "glDepthFunc", (void *) QWindowsEGLStaticContext::libGLESv2.glDepthFunc },
+        { "glDepthMask", (void *) QWindowsEGLStaticContext::libGLESv2.glDepthMask },
+        { "glDisable", (void *) QWindowsEGLStaticContext::libGLESv2.glDisable },
+        { "glDrawArrays", (void *) QWindowsEGLStaticContext::libGLESv2.glDrawArrays },
+        { "glDrawElements", (void *) QWindowsEGLStaticContext::libGLESv2.glDrawElements },
+        { "glEnable", (void *) QWindowsEGLStaticContext::libGLESv2.glEnable },
+        { "glFinish", (void *) QWindowsEGLStaticContext::libGLESv2.glFinish },
+        { "glFlush", (void *) QWindowsEGLStaticContext::libGLESv2.glFlush },
+        { "glFrontFace", (void *) QWindowsEGLStaticContext::libGLESv2.glFrontFace },
+        { "glGenTextures", (void *) QWindowsEGLStaticContext::libGLESv2.glGenTextures },
+        { "glGetBooleanv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetBooleanv },
+        { "glGetError", (void *) QWindowsEGLStaticContext::libGLESv2.glGetError },
+        { "glGetFloatv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetFloatv },
+        { "glGetIntegerv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetIntegerv },
+        { "glGetString", (void *) QWindowsEGLStaticContext::libGLESv2.glGetString },
+        { "glGetTexParameterfv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetTexParameterfv },
+        { "glGetTexParameteriv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetTexParameteriv },
+        { "glHint", (void *) QWindowsEGLStaticContext::libGLESv2.glHint },
+        { "glIsEnabled", (void *) QWindowsEGLStaticContext::libGLESv2.glIsEnabled },
+        { "glIsTexture", (void *) QWindowsEGLStaticContext::libGLESv2.glIsTexture },
+        { "glLineWidth", (void *) QWindowsEGLStaticContext::libGLESv2.glLineWidth },
+        { "glPixelStorei", (void *) QWindowsEGLStaticContext::libGLESv2.glPixelStorei },
+        { "glPolygonOffset", (void *) QWindowsEGLStaticContext::libGLESv2.glPolygonOffset },
+        { "glReadPixels", (void *) QWindowsEGLStaticContext::libGLESv2.glReadPixels },
+        { "glScissor", (void *) QWindowsEGLStaticContext::libGLESv2.glScissor },
+        { "glStencilFunc", (void *) QWindowsEGLStaticContext::libGLESv2.glStencilFunc },
+        { "glStencilMask", (void *) QWindowsEGLStaticContext::libGLESv2.glStencilMask },
+        { "glStencilOp", (void *) QWindowsEGLStaticContext::libGLESv2.glStencilOp },
+        { "glTexImage2D", (void *) QWindowsEGLStaticContext::libGLESv2.glTexImage2D },
+        { "glTexParameterf", (void *) QWindowsEGLStaticContext::libGLESv2.glTexParameterf },
+        { "glTexParameterfv", (void *) QWindowsEGLStaticContext::libGLESv2.glTexParameterfv },
+        { "glTexParameteri", (void *) QWindowsEGLStaticContext::libGLESv2.glTexParameteri },
+        { "glTexParameteriv", (void *) QWindowsEGLStaticContext::libGLESv2.glTexParameteriv },
+        { "glTexSubImage2D", (void *) QWindowsEGLStaticContext::libGLESv2.glTexSubImage2D },
+        { "glViewport", (void *) QWindowsEGLStaticContext::libGLESv2.glViewport },
+
+        { "glActiveTexture", (void *) QWindowsEGLStaticContext::libGLESv2.glActiveTexture },
+        { "glAttachShader", (void *) QWindowsEGLStaticContext::libGLESv2.glAttachShader },
+        { "glBindAttribLocation", (void *) QWindowsEGLStaticContext::libGLESv2.glBindAttribLocation },
+        { "glBindBuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glBindBuffer },
+        { "glBindFramebuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glBindFramebuffer },
+        { "glBindRenderbuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glBindRenderbuffer },
+        { "glBlendColor", (void *) QWindowsEGLStaticContext::libGLESv2.glBlendColor },
+        { "glBlendEquation", (void *) QWindowsEGLStaticContext::libGLESv2.glBlendEquation },
+        { "glBlendEquationSeparate", (void *) QWindowsEGLStaticContext::libGLESv2.glBlendEquationSeparate },
+        { "glBlendFuncSeparate", (void *) QWindowsEGLStaticContext::libGLESv2.glBlendFuncSeparate },
+        { "glBufferData", (void *) QWindowsEGLStaticContext::libGLESv2.glBufferData },
+        { "glBufferSubData", (void *) QWindowsEGLStaticContext::libGLESv2.glBufferSubData },
+        { "glCheckFramebufferStatus", (void *) QWindowsEGLStaticContext::libGLESv2.glCheckFramebufferStatus },
+        { "glCompileShader", (void *) QWindowsEGLStaticContext::libGLESv2.glCompileShader },
+        { "glCompressedTexImage2D", (void *) QWindowsEGLStaticContext::libGLESv2.glCompressedTexImage2D },
+        { "glCompressedTexSubImage2D", (void *) QWindowsEGLStaticContext::libGLESv2.glCompressedTexSubImage2D },
+        { "glCreateProgram", (void *) QWindowsEGLStaticContext::libGLESv2.glCreateProgram },
+        { "glCreateShader", (void *) QWindowsEGLStaticContext::libGLESv2.glCreateShader },
+        { "glDeleteBuffers", (void *) QWindowsEGLStaticContext::libGLESv2.glDeleteBuffers },
+        { "glDeleteFramebuffers", (void *) QWindowsEGLStaticContext::libGLESv2.glDeleteFramebuffers },
+        { "glDeleteProgram", (void *) QWindowsEGLStaticContext::libGLESv2.glDeleteProgram },
+        { "glDeleteRenderbuffers", (void *) QWindowsEGLStaticContext::libGLESv2.glDeleteRenderbuffers },
+        { "glDeleteShader", (void *) QWindowsEGLStaticContext::libGLESv2.glDeleteShader },
+        { "glDetachShader", (void *) QWindowsEGLStaticContext::libGLESv2.glDetachShader },
+        { "glDisableVertexAttribArray", (void *) QWindowsEGLStaticContext::libGLESv2.glDisableVertexAttribArray },
+        { "glEnableVertexAttribArray", (void *) QWindowsEGLStaticContext::libGLESv2.glEnableVertexAttribArray },
+        { "glFramebufferRenderbuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glFramebufferRenderbuffer },
+        { "glFramebufferTexture2D", (void *) QWindowsEGLStaticContext::libGLESv2.glFramebufferTexture2D },
+        { "glGenBuffers", (void *) QWindowsEGLStaticContext::libGLESv2.glGenBuffers },
+        { "glGenerateMipmap", (void *) QWindowsEGLStaticContext::libGLESv2.glGenerateMipmap },
+        { "glGenFramebuffers", (void *) QWindowsEGLStaticContext::libGLESv2.glGenFramebuffers },
+        { "glGenRenderbuffers", (void *) QWindowsEGLStaticContext::libGLESv2.glGenRenderbuffers },
+        { "glGetActiveAttrib", (void *) QWindowsEGLStaticContext::libGLESv2.glGetActiveAttrib },
+        { "glGetActiveUniform", (void *) QWindowsEGLStaticContext::libGLESv2.glGetActiveUniform },
+        { "glGetAttachedShaders", (void *) QWindowsEGLStaticContext::libGLESv2.glGetAttachedShaders },
+        { "glGetAttribLocation", (void *) QWindowsEGLStaticContext::libGLESv2.glGetAttribLocation },
+        { "glGetBufferParameteriv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetBufferParameteriv },
+        { "glGetFramebufferAttachmentParameteriv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetFramebufferAttachmentParameteriv },
+        { "glGetProgramiv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetProgramiv },
+        { "glGetProgramInfoLog", (void *) QWindowsEGLStaticContext::libGLESv2.glGetProgramInfoLog },
+        { "glGetRenderbufferParameteriv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetRenderbufferParameteriv },
+        { "glGetShaderiv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetShaderiv },
+        { "glGetShaderInfoLog", (void *) QWindowsEGLStaticContext::libGLESv2.glGetShaderInfoLog },
+        { "glGetShaderPrecisionFormat", (void *) QWindowsEGLStaticContext::libGLESv2.glGetShaderPrecisionFormat },
+        { "glGetShaderSource", (void *) QWindowsEGLStaticContext::libGLESv2.glGetShaderSource },
+        { "glGetUniformfv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetUniformfv },
+        { "glGetUniformiv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetUniformiv },
+        { "glGetUniformLocation", (void *) QWindowsEGLStaticContext::libGLESv2.glGetUniformLocation },
+        { "glGetVertexAttribfv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetVertexAttribfv },
+        { "glGetVertexAttribiv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetVertexAttribiv },
+        { "glGetVertexAttribPointerv", (void *) QWindowsEGLStaticContext::libGLESv2.glGetVertexAttribPointerv },
+        { "glIsBuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glIsBuffer },
+        { "glIsFramebuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glIsFramebuffer },
+        { "glIsProgram", (void *) QWindowsEGLStaticContext::libGLESv2.glIsProgram },
+        { "glIsRenderbuffer", (void *) QWindowsEGLStaticContext::libGLESv2.glIsRenderbuffer },
+        { "glIsShader", (void *) QWindowsEGLStaticContext::libGLESv2.glIsShader },
+        { "glLinkProgram", (void *) QWindowsEGLStaticContext::libGLESv2.glLinkProgram },
+        { "glReleaseShaderCompiler", (void *) QWindowsEGLStaticContext::libGLESv2.glReleaseShaderCompiler },
+        { "glRenderbufferStorage", (void *) QWindowsEGLStaticContext::libGLESv2.glRenderbufferStorage },
+        { "glSampleCoverage", (void *) QWindowsEGLStaticContext::libGLESv2.glSampleCoverage },
+        { "glShaderBinary", (void *) QWindowsEGLStaticContext::libGLESv2.glShaderBinary },
+        { "glShaderSource", (void *) QWindowsEGLStaticContext::libGLESv2.glShaderSource },
+        { "glStencilFuncSeparate", (void *) QWindowsEGLStaticContext::libGLESv2.glStencilFuncSeparate },
+        { "glStencilMaskSeparate", (void *) QWindowsEGLStaticContext::libGLESv2.glStencilMaskSeparate },
+        { "glStencilOpSeparate", (void *) QWindowsEGLStaticContext::libGLESv2.glStencilOpSeparate },
+        { "glUniform1f", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform1f },
+        { "glUniform1fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform1fv },
+        { "glUniform1i", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform1i },
+        { "glUniform1iv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform1iv },
+        { "glUniform2f", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform2f },
+        { "glUniform2fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform2fv },
+        { "glUniform2i", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform2i },
+        { "glUniform2iv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform2iv },
+        { "glUniform3f", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform3f },
+        { "glUniform3fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform3fv },
+        { "glUniform3i", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform3i },
+        { "glUniform3iv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform3iv },
+        { "glUniform4f", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform4f },
+        { "glUniform4fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform4fv },
+        { "glUniform4i", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform4i },
+        { "glUniform4iv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniform4iv },
+        { "glUniformMatrix2fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniformMatrix2fv },
+        { "glUniformMatrix3fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniformMatrix3fv },
+        { "glUniformMatrix4fv", (void *) QWindowsEGLStaticContext::libGLESv2.glUniformMatrix4fv },
+        { "glUseProgram", (void *) QWindowsEGLStaticContext::libGLESv2.glUseProgram },
+        { "glValidateProgram", (void *) QWindowsEGLStaticContext::libGLESv2.glValidateProgram },
+        { "glVertexAttrib1f", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib1f },
+        { "glVertexAttrib1fv", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib1fv },
+        { "glVertexAttrib2f", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib2f },
+        { "glVertexAttrib2fv", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib2fv },
+        { "glVertexAttrib3f", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib3f },
+        { "glVertexAttrib3fv", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib3fv },
+        { "glVertexAttrib4f", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib4f },
+        { "glVertexAttrib4fv", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttrib4fv },
+        { "glVertexAttribPointer", (void *) QWindowsEGLStaticContext::libGLESv2.glVertexAttribPointer },
+
+        { "glClearDepthf", (void *) QWindowsEGLStaticContext::libGLESv2.glClearDepthf },
+        { "glDepthRangef", (void *) QWindowsEGLStaticContext::libGLESv2.glDepthRangef }
+    };
+    for (size_t i = 0; i < sizeof(standardFuncs) / sizeof(StdFunc); ++i)
+        if (procName == standardFuncs[i].name)
+            return reinterpret_cast<QFunctionPointer>(standardFuncs[i].func);
+
+    QWindowsEGLStaticContext::libEGL.eglBindAPI(m_api);
+    QFunctionPointer procAddress = reinterpret_cast<QFunctionPointer>(QWindowsEGLStaticContext::libEGL.eglGetProcAddress(procName.constData()));
+    if (QWindowsContext::verbose > 1)
+        qCDebug(lcQpaGl) << __FUNCTION__ <<  procName << QWindowsEGLStaticContext::libEGL.eglGetCurrentContext() << "returns" << procAddress;
+    if (!procAddress && QWindowsContext::verbose)
+        qWarning("%s: Unable to resolve '%s'", __FUNCTION__, procName.constData());
+    return procAddress;
+}
+
+static QVector<EGLint> createConfigAttributesFromFormat(const QSurfaceFormat &format)
+{
+    int redSize     = format.redBufferSize();
+    int greenSize   = format.greenBufferSize();
+    int blueSize    = format.blueBufferSize();
+    int alphaSize   = format.alphaBufferSize();
+    int depthSize   = format.depthBufferSize();
+    int stencilSize = format.stencilBufferSize();
+    int sampleCount = format.samples();
+
+    QVector<EGLint> configAttributes;
+    configAttributes.reserve(16);
+
+    configAttributes.append(EGL_RED_SIZE);
+    configAttributes.append(redSize > 0 ? redSize : 0);
+
+    configAttributes.append(EGL_GREEN_SIZE);
+    configAttributes.append(greenSize > 0 ? greenSize : 0);
+
+    configAttributes.append(EGL_BLUE_SIZE);
+    configAttributes.append(blueSize > 0 ? blueSize : 0);
+
+    configAttributes.append(EGL_ALPHA_SIZE);
+    configAttributes.append(alphaSize > 0 ? alphaSize : 0);
+
+    configAttributes.append(EGL_DEPTH_SIZE);
+    configAttributes.append(depthSize > 0 ? depthSize : 0);
+
+    configAttributes.append(EGL_STENCIL_SIZE);
+    configAttributes.append(stencilSize > 0 ? stencilSize : 0);
+
+    configAttributes.append(EGL_SAMPLES);
+    configAttributes.append(sampleCount > 0 ? sampleCount : 0);
+
+    configAttributes.append(EGL_SAMPLE_BUFFERS);
+    configAttributes.append(sampleCount > 0);
+
+    return configAttributes;
+}
+
+static bool reduceConfigAttributes(QVector<EGLint> *configAttributes)
+{
+    int i = -1;
+
+    i = configAttributes->indexOf(EGL_SWAP_BEHAVIOR);
+    if (i >= 0) {
+        configAttributes->remove(i,2);
     }
-    return ok;
+
+    i = configAttributes->indexOf(EGL_BUFFER_SIZE);
+    if (i >= 0) {
+        if (configAttributes->at(i+1) == 16) {
+            configAttributes->remove(i,2);
+            return true;
+        }
+    }
+
+    i = configAttributes->indexOf(EGL_SAMPLES);
+    if (i >= 0) {
+        EGLint value = configAttributes->value(i+1, 0);
+        if (value > 1)
+            configAttributes->replace(i+1, qMin(EGLint(16), value / 2));
+        else
+            configAttributes->remove(i, 2);
+        return true;
+    }
+
+    i = configAttributes->indexOf(EGL_SAMPLE_BUFFERS);
+    if (i >= 0) {
+        configAttributes->remove(i,2);
+        return true;
+    }
+
+    i = configAttributes->indexOf(EGL_ALPHA_SIZE);
+    if (i >= 0) {
+        configAttributes->remove(i,2);
+#if defined(EGL_BIND_TO_TEXTURE_RGBA) && defined(EGL_BIND_TO_TEXTURE_RGB)
+        i = configAttributes->indexOf(EGL_BIND_TO_TEXTURE_RGBA);
+        if (i >= 0) {
+            configAttributes->replace(i,EGL_BIND_TO_TEXTURE_RGB);
+            configAttributes->replace(i+1,true);
+
+        }
+#endif
+        return true;
+    }
+
+    i = configAttributes->indexOf(EGL_STENCIL_SIZE);
+    if (i >= 0) {
+        if (configAttributes->at(i + 1) > 1)
+            configAttributes->replace(i + 1, 1);
+        else
+            configAttributes->remove(i, 2);
+        return true;
+    }
+
+    i = configAttributes->indexOf(EGL_DEPTH_SIZE);
+    if (i >= 0) {
+        if (configAttributes->at(i + 1) > 1)
+            configAttributes->replace(i + 1, 1);
+        else
+            configAttributes->remove(i, 2);
+        return true;
+    }
+#ifdef EGL_BIND_TO_TEXTURE_RGB
+    i = configAttributes->indexOf(EGL_BIND_TO_TEXTURE_RGB);
+    if (i >= 0) {
+        configAttributes->remove(i,2);
+        return true;
+    }
+#endif
+
+    return false;
+}
+
+EGLConfig QWindowsEGLContext::chooseConfig(const QSurfaceFormat &format)
+{
+    QVector<EGLint> configureAttributes = createConfigAttributesFromFormat(format);
+    configureAttributes.append(EGL_SURFACE_TYPE);
+    configureAttributes.append(EGL_WINDOW_BIT);
+    configureAttributes.append(EGL_RENDERABLE_TYPE);
+    configureAttributes.append(EGL_OPENGL_ES2_BIT);
+    configureAttributes.append(EGL_NONE);
+
+    EGLDisplay display = m_staticContext->display();
+    EGLConfig cfg = 0;
+    do {
+        // Get the number of matching configurations for this set of properties.
+        EGLint matching = 0;
+        if (!QWindowsEGLStaticContext::libEGL.eglChooseConfig(display, configureAttributes.constData(), 0, 0, &matching) || !matching)
+            continue;
+
+        // Fetch all of the matching configurations and find the
+        // first that matches the pixel format we wanted.
+        int i = configureAttributes.indexOf(EGL_RED_SIZE);
+        int confAttrRed = configureAttributes.at(i+1);
+        i = configureAttributes.indexOf(EGL_GREEN_SIZE);
+        int confAttrGreen = configureAttributes.at(i+1);
+        i = configureAttributes.indexOf(EGL_BLUE_SIZE);
+        int confAttrBlue = configureAttributes.at(i+1);
+        i = configureAttributes.indexOf(EGL_ALPHA_SIZE);
+        int confAttrAlpha = i == -1 ? 0 : configureAttributes.at(i+1);
+
+        QVector<EGLConfig> configs(matching);
+        QWindowsEGLStaticContext::libEGL.eglChooseConfig(display, configureAttributes.constData(), configs.data(), configs.size(), &matching);
+        if (!cfg && matching > 0)
+            cfg = configs.first();
+
+        EGLint red = 0;
+        EGLint green = 0;
+        EGLint blue = 0;
+        EGLint alpha = 0;
+        for (int i = 0; i < configs.size(); ++i) {
+            if (confAttrRed)
+                QWindowsEGLStaticContext::libEGL.eglGetConfigAttrib(display, configs[i], EGL_RED_SIZE, &red);
+            if (confAttrGreen)
+                QWindowsEGLStaticContext::libEGL.eglGetConfigAttrib(display, configs[i], EGL_GREEN_SIZE, &green);
+            if (confAttrBlue)
+                QWindowsEGLStaticContext::libEGL.eglGetConfigAttrib(display, configs[i], EGL_BLUE_SIZE, &blue);
+            if (confAttrAlpha)
+                QWindowsEGLStaticContext::libEGL.eglGetConfigAttrib(display, configs[i], EGL_ALPHA_SIZE, &alpha);
+
+            if (red == confAttrRed && green == confAttrGreen
+                    && blue == confAttrBlue && alpha == confAttrAlpha)
+                return configs[i];
+        }
+    } while (reduceConfigAttributes(&configureAttributes));
+
+    if (!cfg)
+        qWarning("Cannot find EGLConfig, returning null config");
+
+    return cfg;
 }
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowseglcontext.h b/src/plugins/platforms/windows/qwindowseglcontext.h
index 33653b2f2e..63a7c25a6f 100644
--- a/src/plugins/platforms/windows/qwindowseglcontext.h
+++ b/src/plugins/platforms/windows/qwindowseglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,20 +34,238 @@
 #ifndef QWINDOWSEGLCONTEXT_H
 #define QWINDOWSEGLCONTEXT_H
 
-#include <QtPlatformSupport/private/qeglplatformcontext_p.h>
-#include <QSharedPointer>
+#include "qwindowsopenglcontext.h"
+#include <EGL/egl.h>
 
 QT_BEGIN_NAMESPACE
 
-class QWindowsEGLStaticContext
+struct QWindowsLibEGL
+{
+    bool init();
+
+    EGLint (EGLAPIENTRY * eglGetError)(void);
+    EGLDisplay (EGLAPIENTRY * eglGetDisplay)(EGLNativeDisplayType display_id);
+    EGLDisplay (EGLAPIENTRY * eglGetPlatformDisplayEXT)(EGLenum platform, void *native_display, const EGLint *attrib_list);
+    EGLBoolean (EGLAPIENTRY * eglInitialize)(EGLDisplay dpy, EGLint *major, EGLint *minor);
+    EGLBoolean (EGLAPIENTRY * eglTerminate)(EGLDisplay dpy);
+    EGLBoolean (EGLAPIENTRY * eglChooseConfig)(EGLDisplay dpy, const EGLint *attrib_list,
+                                               EGLConfig *configs, EGLint config_size,
+                                               EGLint *num_config);
+    EGLBoolean (EGLAPIENTRY * eglGetConfigAttrib)(EGLDisplay dpy, EGLConfig config,
+                                                  EGLint attribute, EGLint *value);
+    EGLSurface (EGLAPIENTRY * eglCreateWindowSurface)(EGLDisplay dpy, EGLConfig config,
+                                                      EGLNativeWindowType win,
+                                                      const EGLint *attrib_list);
+    EGLSurface (EGLAPIENTRY * eglCreatePbufferSurface)(EGLDisplay dpy, EGLConfig config,
+                                                       const EGLint *attrib_list);
+    EGLBoolean (EGLAPIENTRY * eglDestroySurface)(EGLDisplay dpy, EGLSurface surface);
+    EGLBoolean (EGLAPIENTRY * eglBindAPI)(EGLenum api);
+    EGLBoolean (EGLAPIENTRY * eglSwapInterval)(EGLDisplay dpy, EGLint interval);
+    EGLContext (EGLAPIENTRY * eglCreateContext)(EGLDisplay dpy, EGLConfig config,
+                                                EGLContext share_context,
+                                                const EGLint *attrib_list);
+    EGLBoolean (EGLAPIENTRY * eglDestroyContext)(EGLDisplay dpy, EGLContext ctx);
+    EGLBoolean (EGLAPIENTRY * eglMakeCurrent)(EGLDisplay dpy, EGLSurface draw,
+                                              EGLSurface read, EGLContext ctx);
+    EGLContext (EGLAPIENTRY * eglGetCurrentContext)(void);
+    EGLSurface (EGLAPIENTRY * eglGetCurrentSurface)(EGLint readdraw);
+    EGLDisplay (EGLAPIENTRY * eglGetCurrentDisplay)(void);
+    EGLBoolean (EGLAPIENTRY * eglSwapBuffers)(EGLDisplay dpy, EGLSurface surface);
+    __eglMustCastToProperFunctionPointerType (EGLAPIENTRY * eglGetProcAddress)(const char *procname);
+
+private:
+#ifndef QT_STATIC
+    void *resolve(const char *name);
+    HMODULE m_lib;
+#endif
+};
+
+struct QWindowsLibGLESv2
+{
+    bool init();
+#ifndef QT_STATIC
+    void *moduleHandle() const { return m_lib; }
+#else
+    void *moduleHandle() const { return Q_NULLPTR; }
+#endif
+
+    // GL1+GLES2 common
+    void (APIENTRY * glBindTexture)(GLenum target, GLuint texture);
+    void (APIENTRY * glBlendFunc)(GLenum sfactor, GLenum dfactor);
+    void (APIENTRY * glClear)(GLbitfield mask);
+    void (APIENTRY * glClearColor)(GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha);
+    void (APIENTRY * glClearStencil)(GLint s);
+    void (APIENTRY * glColorMask)(GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
+    void (APIENTRY * glCopyTexImage2D)(GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+    void (APIENTRY * glCopyTexSubImage2D)(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+    void (APIENTRY * glCullFace)(GLenum mode);
+    void (APIENTRY * glDeleteTextures)(GLsizei n, const GLuint* textures);
+    void (APIENTRY * glDepthFunc)(GLenum func);
+    void (APIENTRY * glDepthMask)(GLboolean flag);
+    void (APIENTRY * glDisable)(GLenum cap);
+    void (APIENTRY * glDrawArrays)(GLenum mode, GLint first, GLsizei count);
+    void (APIENTRY * glDrawElements)(GLenum mode, GLsizei count, GLenum type, const GLvoid* indices);
+    void (APIENTRY * glEnable)(GLenum cap);
+    void (APIENTRY * glFinish)();
+    void (APIENTRY * glFlush)();
+    void (APIENTRY * glFrontFace)(GLenum mode);
+    void (APIENTRY * glGenTextures)(GLsizei n, GLuint* textures);
+    void (APIENTRY * glGetBooleanv)(GLenum pname, GLboolean* params);
+    GLenum (APIENTRY * glGetError)();
+    void (APIENTRY * glGetFloatv)(GLenum pname, GLfloat* params);
+    void (APIENTRY * glGetIntegerv)(GLenum pname, GLint* params);
+    const GLubyte * (APIENTRY * glGetString)(GLenum name);
+    void (APIENTRY * glGetTexParameterfv)(GLenum target, GLenum pname, GLfloat* params);
+    void (APIENTRY * glGetTexParameteriv)(GLenum target, GLenum pname, GLint* params);
+    void (APIENTRY * glHint)(GLenum target, GLenum mode);
+    GLboolean (APIENTRY * glIsEnabled)(GLenum cap);
+    GLboolean (APIENTRY * glIsTexture)(GLuint texture);
+    void (APIENTRY * glLineWidth)(GLfloat width);
+    void (APIENTRY * glPixelStorei)(GLenum pname, GLint param);
+    void (APIENTRY * glPolygonOffset)(GLfloat factor, GLfloat units);
+    void (APIENTRY * glReadPixels)(GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLvoid* pixels);
+    void (APIENTRY * glScissor)(GLint x, GLint y, GLsizei width, GLsizei height);
+    void (APIENTRY * glStencilFunc)(GLenum func, GLint ref, GLuint mask);
+    void (APIENTRY * glStencilMask)(GLuint mask);
+    void (APIENTRY * glStencilOp)(GLenum fail, GLenum zfail, GLenum zpass);
+    void (APIENTRY * glTexImage2D)(GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid* pixels);
+    void (APIENTRY * glTexParameterf)(GLenum target, GLenum pname, GLfloat param);
+    void (APIENTRY * glTexParameterfv)(GLenum target, GLenum pname, const GLfloat* params);
+    void (APIENTRY * glTexParameteri)(GLenum target, GLenum pname, GLint param);
+    void (APIENTRY * glTexParameteriv)(GLenum target, GLenum pname, const GLint* params);
+    void (APIENTRY * glTexSubImage2D)(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid* pixels);
+    void (APIENTRY * glViewport)(GLint x, GLint y, GLsizei width, GLsizei height);
+
+    // GLES2
+    void (APIENTRY * glActiveTexture)(GLenum texture);
+    void (APIENTRY * glAttachShader)(GLuint program, GLuint shader);
+    void (APIENTRY * glBindAttribLocation)(GLuint program, GLuint index, const char* name);
+    void (APIENTRY * glBindBuffer)(GLenum target, GLuint buffer);
+    void (APIENTRY * glBindFramebuffer)(GLenum target, GLuint framebuffer);
+    void (APIENTRY * glBindRenderbuffer)(GLenum target, GLuint renderbuffer);
+    void (APIENTRY * glBlendColor)(GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha);
+    void (APIENTRY * glBlendEquation)(GLenum mode);
+    void (APIENTRY * glBlendEquationSeparate)(GLenum modeRGB, GLenum modeAlpha);
+    void (APIENTRY * glBlendFuncSeparate)(GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha);
+    void (APIENTRY * glBufferData)(GLenum target, qopengl_GLsizeiptr size, const void* data, GLenum usage);
+    void (APIENTRY * glBufferSubData)(GLenum target, qopengl_GLintptr offset, qopengl_GLsizeiptr size, const void* data);
+    GLenum (APIENTRY * glCheckFramebufferStatus)(GLenum target);
+    void (APIENTRY * glCompileShader)(GLuint shader);
+    void (APIENTRY * glCompressedTexImage2D)(GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const void* data);
+    void (APIENTRY * glCompressedTexSubImage2D)(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const void* data);
+    GLuint (APIENTRY * glCreateProgram)();
+    GLuint (APIENTRY * glCreateShader)(GLenum type);
+    void (APIENTRY * glDeleteBuffers)(GLsizei n, const GLuint* buffers);
+    void (APIENTRY * glDeleteFramebuffers)(GLsizei n, const GLuint* framebuffers);
+    void (APIENTRY * glDeleteProgram)(GLuint program);
+    void (APIENTRY * glDeleteRenderbuffers)(GLsizei n, const GLuint* renderbuffers);
+    void (APIENTRY * glDeleteShader)(GLuint shader);
+    void (APIENTRY * glDetachShader)(GLuint program, GLuint shader);
+    void (APIENTRY * glDisableVertexAttribArray)(GLuint index);
+    void (APIENTRY * glEnableVertexAttribArray)(GLuint index);
+    void (APIENTRY * glFramebufferRenderbuffer)(GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer);
+    void (APIENTRY * glFramebufferTexture2D)(GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level);
+    void (APIENTRY * glGenBuffers)(GLsizei n, GLuint* buffers);
+    void (APIENTRY * glGenerateMipmap)(GLenum target);
+    void (APIENTRY * glGenFramebuffers)(GLsizei n, GLuint* framebuffers);
+    void (APIENTRY * glGenRenderbuffers)(GLsizei n, GLuint* renderbuffers);
+    void (APIENTRY * glGetActiveAttrib)(GLuint program, GLuint index, GLsizei bufsize, GLsizei* length, GLint* size, GLenum* type, char* name);
+    void (APIENTRY * glGetActiveUniform)(GLuint program, GLuint index, GLsizei bufsize, GLsizei* length, GLint* size, GLenum* type, char* name);
+    void (APIENTRY * glGetAttachedShaders)(GLuint program, GLsizei maxcount, GLsizei* count, GLuint* shaders);
+    GLint (APIENTRY * glGetAttribLocation)(GLuint program, const char* name);
+    void (APIENTRY * glGetBufferParameteriv)(GLenum target, GLenum pname, GLint* params);
+    void (APIENTRY * glGetFramebufferAttachmentParameteriv)(GLenum target, GLenum attachment, GLenum pname, GLint* params);
+    void (APIENTRY * glGetProgramiv)(GLuint program, GLenum pname, GLint* params);
+    void (APIENTRY * glGetProgramInfoLog)(GLuint program, GLsizei bufsize, GLsizei* length, char* infolog);
+    void (APIENTRY * glGetRenderbufferParameteriv)(GLenum target, GLenum pname, GLint* params);
+    void (APIENTRY * glGetShaderiv)(GLuint shader, GLenum pname, GLint* params);
+    void (APIENTRY * glGetShaderInfoLog)(GLuint shader, GLsizei bufsize, GLsizei* length, char* infolog);
+    void (APIENTRY * glGetShaderPrecisionFormat)(GLenum shadertype, GLenum precisiontype, GLint* range, GLint* precision);
+    void (APIENTRY * glGetShaderSource)(GLuint shader, GLsizei bufsize, GLsizei* length, char* source);
+    void (APIENTRY * glGetUniformfv)(GLuint program, GLint location, GLfloat* params);
+    void (APIENTRY * glGetUniformiv)(GLuint program, GLint location, GLint* params);
+    GLint (APIENTRY * glGetUniformLocation)(GLuint program, const char* name);
+    void (APIENTRY * glGetVertexAttribfv)(GLuint index, GLenum pname, GLfloat* params);
+    void (APIENTRY * glGetVertexAttribiv)(GLuint index, GLenum pname, GLint* params);
+    void (APIENTRY * glGetVertexAttribPointerv)(GLuint index, GLenum pname, void** pointer);
+    GLboolean (APIENTRY * glIsBuffer)(GLuint buffer);
+    GLboolean (APIENTRY * glIsFramebuffer)(GLuint framebuffer);
+    GLboolean (APIENTRY * glIsProgram)(GLuint program);
+    GLboolean (APIENTRY * glIsRenderbuffer)(GLuint renderbuffer);
+    GLboolean (APIENTRY * glIsShader)(GLuint shader);
+    void (APIENTRY * glLinkProgram)(GLuint program);
+    void (APIENTRY * glReleaseShaderCompiler)();
+    void (APIENTRY * glRenderbufferStorage)(GLenum target, GLenum internalformat, GLsizei width, GLsizei height);
+    void (APIENTRY * glSampleCoverage)(GLclampf value, GLboolean invert);
+    void (APIENTRY * glShaderBinary)(GLint n, const GLuint* shaders, GLenum binaryformat, const void* binary, GLint length);
+    void (APIENTRY * glShaderSource)(GLuint shader, GLsizei count, const char** string, const GLint* length);
+    void (APIENTRY * glStencilFuncSeparate)(GLenum face, GLenum func, GLint ref, GLuint mask);
+    void (APIENTRY * glStencilMaskSeparate)(GLenum face, GLuint mask);
+    void (APIENTRY * glStencilOpSeparate)(GLenum face, GLenum fail, GLenum zfail, GLenum zpass);
+    void (APIENTRY * glUniform1f)(GLint location, GLfloat x);
+    void (APIENTRY * glUniform1fv)(GLint location, GLsizei count, const GLfloat* v);
+    void (APIENTRY * glUniform1i)(GLint location, GLint x);
+    void (APIENTRY * glUniform1iv)(GLint location, GLsizei count, const GLint* v);
+    void (APIENTRY * glUniform2f)(GLint location, GLfloat x, GLfloat y);
+    void (APIENTRY * glUniform2fv)(GLint location, GLsizei count, const GLfloat* v);
+    void (APIENTRY * glUniform2i)(GLint location, GLint x, GLint y);
+    void (APIENTRY * glUniform2iv)(GLint location, GLsizei count, const GLint* v);
+    void (APIENTRY * glUniform3f)(GLint location, GLfloat x, GLfloat y, GLfloat z);
+    void (APIENTRY * glUniform3fv)(GLint location, GLsizei count, const GLfloat* v);
+    void (APIENTRY * glUniform3i)(GLint location, GLint x, GLint y, GLint z);
+    void (APIENTRY * glUniform3iv)(GLint location, GLsizei count, const GLint* v);
+    void (APIENTRY * glUniform4f)(GLint location, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+    void (APIENTRY * glUniform4fv)(GLint location, GLsizei count, const GLfloat* v);
+    void (APIENTRY * glUniform4i)(GLint location, GLint x, GLint y, GLint z, GLint w);
+    void (APIENTRY * glUniform4iv)(GLint location, GLsizei count, const GLint* v);
+    void (APIENTRY * glUniformMatrix2fv)(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+    void (APIENTRY * glUniformMatrix3fv)(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+    void (APIENTRY * glUniformMatrix4fv)(GLint location, GLsizei count, GLboolean transpose, const GLfloat* value);
+    void (APIENTRY * glUseProgram)(GLuint program);
+    void (APIENTRY * glValidateProgram)(GLuint program);
+    void (APIENTRY * glVertexAttrib1f)(GLuint indx, GLfloat x);
+    void (APIENTRY * glVertexAttrib1fv)(GLuint indx, const GLfloat* values);
+    void (APIENTRY * glVertexAttrib2f)(GLuint indx, GLfloat x, GLfloat y);
+    void (APIENTRY * glVertexAttrib2fv)(GLuint indx, const GLfloat* values);
+    void (APIENTRY * glVertexAttrib3f)(GLuint indx, GLfloat x, GLfloat y, GLfloat z);
+    void (APIENTRY * glVertexAttrib3fv)(GLuint indx, const GLfloat* values);
+    void (APIENTRY * glVertexAttrib4f)(GLuint indx, GLfloat x, GLfloat y, GLfloat z, GLfloat w);
+    void (APIENTRY * glVertexAttrib4fv)(GLuint indx, const GLfloat* values);
+    void (APIENTRY * glVertexAttribPointer)(GLuint indx, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const void* ptr);
+
+    // ES only
+    void (APIENTRY * glClearDepthf)(GLclampf depth);
+    void (APIENTRY * glDepthRangef)(GLclampf nearVal, GLclampf farVal);
+
+private:
+#ifndef QT_STATIC
+    void *resolve(const char *name);
+    HMODULE m_lib;
+#endif
+};
+
+class QWindowsEGLStaticContext : public QWindowsStaticOpenGLContext
 {
     Q_DISABLE_COPY(QWindowsEGLStaticContext)
+
 public:
     static QWindowsEGLStaticContext *create();
     ~QWindowsEGLStaticContext();
 
     EGLDisplay display() const { return m_display; }
 
+    QWindowsOpenGLContext *createContext(QOpenGLContext *context);
+    void *moduleHandle() const { return libGLESv2.moduleHandle(); }
+    QOpenGLContext::OpenGLModuleType moduleType() const { return QOpenGLContext::LibGLES; }
+
+    void *createWindowSurface(void *nativeWindow, void *nativeConfig) Q_DECL_OVERRIDE;
+    void destroyWindowSurface(void *nativeSurface) Q_DECL_OVERRIDE;
+
+    QSurfaceFormat formatFromConfig(EGLDisplay display, EGLConfig config, const QSurfaceFormat &referenceFormat);
+
+    static QWindowsLibEGL libEGL;
+    static QWindowsLibGLESv2 libGLESv2;
+
 private:
     QWindowsEGLStaticContext(EGLDisplay display, int version);
 
@@ -63,26 +273,38 @@ private:
     const int m_version; //! majorVersion<<8 + minorVersion
 };
 
-class QWindowsEGLContext : public QEGLPlatformContext
+class QWindowsEGLContext : public QWindowsOpenGLContext
 {
 public:
-    typedef QSharedPointer<QWindowsEGLStaticContext> QWindowsEGLStaticContextPtr;
-
-    QWindowsEGLContext(const QWindowsEGLStaticContextPtr& staticContext,
+    QWindowsEGLContext(QWindowsEGLStaticContext *staticContext,
                        const QSurfaceFormat &format,
                        QPlatformOpenGLContext *share);
-
     ~QWindowsEGLContext();
 
-    static bool hasThreadedOpenGLCapability();
+    bool makeCurrent(QPlatformSurface *surface) Q_DECL_OVERRIDE;
+    void doneCurrent() Q_DECL_OVERRIDE;
+    void swapBuffers(QPlatformSurface *surface) Q_DECL_OVERRIDE;
+    QFunctionPointer getProcAddress(const QByteArray &procName) Q_DECL_OVERRIDE;
 
-    bool makeCurrent(QPlatformSurface *surface);
+    QSurfaceFormat format() const Q_DECL_OVERRIDE { return m_format; }
+    bool isSharing() const Q_DECL_OVERRIDE { return m_shareContext != EGL_NO_CONTEXT; }
+    bool isValid() const Q_DECL_OVERRIDE { return m_eglContext != EGL_NO_CONTEXT; }
 
-protected:
-    EGLSurface eglSurfaceForPlatformSurface(QPlatformSurface *surface);
+    void *nativeContext() const Q_DECL_OVERRIDE { return m_eglContext; }
+    void *nativeDisplay() const Q_DECL_OVERRIDE { return m_eglDisplay; }
+    void *nativeConfig() const Q_DECL_OVERRIDE { return m_eglConfig; }
 
 private:
-    const QWindowsEGLStaticContextPtr m_staticContext;
+    EGLConfig chooseConfig(const QSurfaceFormat &format);
+
+    QWindowsEGLStaticContext *m_staticContext;
+    EGLContext m_eglContext;
+    EGLContext m_shareContext;
+    EGLDisplay m_eglDisplay;
+    EGLConfig m_eglConfig;
+    QSurfaceFormat m_format;
+    EGLenum m_api;
+    int m_swapInterval;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsfontdatabase.cpp b/src/plugins/platforms/windows/qwindowsfontdatabase.cpp
index f30dcbaa32..60eacd6ec3 100644
--- a/src/plugins/platforms/windows/qwindowsfontdatabase.cpp
+++ b/src/plugins/platforms/windows/qwindowsfontdatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -164,25 +156,24 @@ namespace {
     {
         Q_ASSERT(tagName.size() == 4);
         quint32 tagId = *(reinterpret_cast<const quint32 *>(tagName.constData()));
-        if (Q_UNLIKELY(m_fontData.size() < sizeof(OffsetSubTable)))
+        const size_t fontDataSize = m_fontData.size();
+        if (Q_UNLIKELY(fontDataSize < sizeof(OffsetSubTable)))
             return 0;
 
         OffsetSubTable *offsetSubTable = reinterpret_cast<OffsetSubTable *>(m_fontData.data());
         TableDirectory *tableDirectory = reinterpret_cast<TableDirectory *>(offsetSubTable + 1);
 
-        quint16 tableCount = qFromBigEndian<quint16>(offsetSubTable->numTables);
-        if (Q_UNLIKELY(quint32(m_fontData.size()) < sizeof(OffsetSubTable) + sizeof(TableDirectory) * tableCount))
+        const size_t tableCount = qFromBigEndian<quint16>(offsetSubTable->numTables);
+        if (Q_UNLIKELY(fontDataSize < sizeof(OffsetSubTable) + sizeof(TableDirectory) * tableCount))
             return 0;
 
-        TableDirectory *nameTableDirectoryEntry = 0;
-        for (int i = 0; i < tableCount; ++i, ++tableDirectory) {
-            if (tableDirectory->identifier == tagId) {
-                nameTableDirectoryEntry = tableDirectory;
-                break;
-            }
+        TableDirectory *tableDirectoryEnd = tableDirectory + tableCount;
+        for (TableDirectory *entry = tableDirectory; entry < tableDirectoryEnd; ++entry) {
+            if (entry->identifier == tagId)
+                return entry;
         }
 
-        return nameTableDirectoryEntry;
+        return 0;
     }
 
     QString EmbeddedFont::familyName(TableDirectory *nameTableDirectoryEntry)
@@ -973,6 +964,31 @@ static int QT_WIN_CALLBACK storeFont(ENUMLOGFONTEX* f, NEWTEXTMETRICEX *textmetr
     return 1;
 }
 
+static int QT_WIN_CALLBACK storeFontSub(ENUMLOGFONTEX* f, NEWTEXTMETRICEX *textmetric,
+                                        int type, LPARAM namesSetIn)
+{
+    Q_UNUSED(textmetric)
+    Q_UNUSED(type)
+
+    HDC dummy = GetDC(0);
+    LOGFONT lf;
+    lf.lfCharSet = DEFAULT_CHARSET;
+    if (wcslen(f->elfLogFont.lfFaceName) >= LF_FACESIZE) {
+        qWarning("%s: Unable to enumerate family '%s'.",
+                 __FUNCTION__, qPrintable(QString::fromWCharArray(f->elfLogFont.lfFaceName)));
+        return 1;
+    }
+    wmemcpy(lf.lfFaceName, f->elfLogFont.lfFaceName,
+            wcslen(f->elfLogFont.lfFaceName) + 1);
+    lf.lfPitchAndFamily = 0;
+    EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFont,
+                       (LPARAM)namesSetIn, 0);
+    ReleaseDC(0, dummy);
+
+    // keep on enumerating
+    return 1;
+}
+
 void QWindowsFontDatabase::populateFontDatabase()
 {
     m_families.clear();
@@ -1008,8 +1024,15 @@ void QWindowsFontDatabase::populate(const QString &family)
     wmemcpy(lf.lfFaceName, reinterpret_cast<const wchar_t*>(family.utf16()),
             family.size() + 1);
     lf.lfPitchAndFamily = 0;
-    EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFont,
-                       (LPARAM)&m_families, 0);
+
+    if (family.isEmpty()) {
+        EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFontSub,
+                           (LPARAM)&m_families, 0);
+    } else {
+        EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFont,
+                           (LPARAM)&m_families, 0);
+    }
+
     ReleaseDC(0, dummy);
 }
 
@@ -1064,7 +1087,7 @@ QFontEngineMulti *QWindowsFontDatabase::fontEngineMulti(QFontEngine *fontEngine,
     if (script == QChar::Script_Common)
         return new QWindowsMultiFontEngine(fontEngine, script);
     // ### as long as fallbacksForFamily() does not take script parameter into account,
-    // prefer QFontEngineMultiQPA's loadEngine() implementation for complex scripts
+    // prefer QFontEngineMultiBasicImpl's loadEngine() implementation for complex scripts
     return QPlatformFontDatabase::fontEngineMulti(fontEngine, script);
 }
 
@@ -1521,13 +1544,15 @@ LOGFONT QWindowsFontDatabase::fontDefToLOGFONT(const QFontDef &request)
 #endif
 
     if (request.styleStrategy & QFont::PreferAntialias) {
-        if (QSysInfo::WindowsVersion >= QSysInfo::WV_XP) {
+        if (QSysInfo::WindowsVersion >= QSysInfo::WV_XP && !(request.styleStrategy & QFont::NoSubpixelAntialias)) {
             qual = CLEARTYPE_QUALITY;
         } else {
             qual = ANTIALIASED_QUALITY;
         }
     } else if (request.styleStrategy & QFont::NoAntialias) {
         qual = NONANTIALIASED_QUALITY;
+    } else if ((request.styleStrategy & QFont::NoSubpixelAntialias) && sharedFontData()->clearTypeEnabled) {
+        qual = ANTIALIASED_QUALITY;
     }
 
     lf.lfQuality        = qual;
@@ -1613,37 +1638,36 @@ QStringList QWindowsFontDatabase::extraTryFontsForFamily(const QString &family)
     return result;
 }
 
+QString QWindowsFontDatabase::familyForStyleHint(QFont::StyleHint styleHint)
+{
+    switch (styleHint) {
+    case QFont::Times:
+        return QStringLiteral("Times New Roman");
+    case QFont::Courier:
+        return QStringLiteral("Courier New");
+    case QFont::Monospace:
+        return QStringLiteral("Courier New");
+    case QFont::Cursive:
+        return QStringLiteral("Comic Sans MS");
+    case QFont::Fantasy:
+        return QStringLiteral("Impact");
+    case QFont::Decorative:
+        return QStringLiteral("Old English");
+    case QFont::Helvetica:
+        return QStringLiteral("Arial");
+    case QFont::System:
+    default:
+        break;
+    }
+    return QStringLiteral("MS Shell Dlg 2");
+}
+
 QStringList QWindowsFontDatabase::fallbacksForFamily(const QString &family, QFont::Style style, QFont::StyleHint styleHint, QChar::Script script) const
 {
     QStringList result = QPlatformFontDatabase::fallbacksForFamily(family, style, styleHint, script);
     if (!result.isEmpty())
         return result;
-
-    switch (styleHint) {
-        case QFont::Times:
-            result << QString::fromLatin1("Times New Roman");
-            break;
-        case QFont::Courier:
-            result << QString::fromLatin1("Courier New");
-            break;
-        case QFont::Monospace:
-            result << QString::fromLatin1("Courier New");
-            break;
-        case QFont::Cursive:
-            result << QString::fromLatin1("Comic Sans MS");
-            break;
-        case QFont::Fantasy:
-            result << QString::fromLatin1("Impact");
-            break;
-        case QFont::Decorative:
-            result << QString::fromLatin1("Old English");
-            break;
-        case QFont::Helvetica:
-        case QFont::System:
-        default:
-            result << QString::fromLatin1("Arial");
-    }
-
+    result.append(QWindowsFontDatabase::familyForStyleHint(styleHint));
     result.append(QWindowsFontDatabase::extraTryFontsForFamily(family));
 
     qCDebug(lcQpaFonts) << __FUNCTION__ << family << style << styleHint
diff --git a/src/plugins/platforms/windows/qwindowsfontdatabase.h b/src/plugins/platforms/windows/qwindowsfontdatabase.h
index a2324544d2..efef6f4ded 100644
--- a/src/plugins/platforms/windows/qwindowsfontdatabase.h
+++ b/src/plugins/platforms/windows/qwindowsfontdatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,17 +69,17 @@ public:
     QWindowsFontDatabase();
     ~QWindowsFontDatabase();
 
-    virtual void populateFontDatabase();
-    virtual QFontEngineMulti *fontEngineMulti(QFontEngine *fontEngine, QChar::Script script);
-    virtual QFontEngine *fontEngine(const QFontDef &fontDef, void *handle);
-    virtual QFontEngine *fontEngine(const QByteArray &fontData, qreal pixelSize, QFont::HintingPreference hintingPreference);
-    virtual QStringList fallbacksForFamily(const QString &family, QFont::Style style, QFont::StyleHint styleHint, QChar::Script script) const;
-    virtual QStringList addApplicationFont(const QByteArray &fontData, const QString &fileName);
-    virtual void releaseHandle(void *handle);
-    virtual QString fontDir() const;
-
-    virtual QFont defaultFont() const { return systemDefaultFont(); }
-    virtual bool fontsAlwaysScalable() const;
+    void populateFontDatabase() Q_DECL_OVERRIDE;
+    QFontEngineMulti *fontEngineMulti(QFontEngine *fontEngine, QChar::Script script) Q_DECL_OVERRIDE;
+    QFontEngine *fontEngine(const QFontDef &fontDef, void *handle) Q_DECL_OVERRIDE;
+    QFontEngine *fontEngine(const QByteArray &fontData, qreal pixelSize, QFont::HintingPreference hintingPreference) Q_DECL_OVERRIDE;
+    QStringList fallbacksForFamily(const QString &family, QFont::Style style, QFont::StyleHint styleHint, QChar::Script script) const Q_DECL_OVERRIDE;
+    QStringList addApplicationFont(const QByteArray &fontData, const QString &fileName) Q_DECL_OVERRIDE;
+    void releaseHandle(void *handle) Q_DECL_OVERRIDE;
+    QString fontDir() const Q_DECL_OVERRIDE;
+
+    QFont defaultFont() const  Q_DECL_OVERRIDE { return systemDefaultFont(); }
+    bool fontsAlwaysScalable() const Q_DECL_OVERRIDE;
     void derefUniqueFont(const QString &uniqueFont);
     void refUniqueFont(const QString &uniqueFont);
 
@@ -104,6 +96,7 @@ public:
     static LOGFONT fontDefToLOGFONT(const QFontDef &fontDef);
 
     static QStringList extraTryFontsForFamily(const QString &family);
+    static QString familyForStyleHint(QFont::StyleHint styleHint);
 
 private:
     void populate(const QString &family = QString());
diff --git a/src/plugins/platforms/windows/qwindowsfontdatabase_ft.cpp b/src/plugins/platforms/windows/qwindowsfontdatabase_ft.cpp
index 734f645e65..011fc9facb 100644
--- a/src/plugins/platforms/windows/qwindowsfontdatabase_ft.cpp
+++ b/src/plugins/platforms/windows/qwindowsfontdatabase_ft.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -383,6 +375,31 @@ static int QT_WIN_CALLBACK storeFont(ENUMLOGFONTEX* f, NEWTEXTMETRICEX *textmetr
     return 1;
 }
 
+static int QT_WIN_CALLBACK storeFontSub(ENUMLOGFONTEX* f, NEWTEXTMETRICEX *textmetric,
+                                        int type, LPARAM namesSetIn)
+{
+    Q_UNUSED(textmetric)
+    Q_UNUSED(type)
+
+    HDC dummy = GetDC(0);
+    LOGFONT lf;
+    lf.lfCharSet = DEFAULT_CHARSET;
+    if (wcslen(f->elfLogFont.lfFaceName) >= LF_FACESIZE) {
+        qWarning("%s: Unable to enumerate family '%s'.",
+                 __FUNCTION__, qPrintable(QString::fromWCharArray(f->elfLogFont.lfFaceName)));
+        return 1;
+    }
+    wmemcpy(lf.lfFaceName, f->elfLogFont.lfFaceName,
+            wcslen(f->elfLogFont.lfFaceName) + 1);
+    lf.lfPitchAndFamily = 0;
+    EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFont,
+                       (LPARAM)namesSetIn, 0);
+    ReleaseDC(0, dummy);
+
+    // keep on enumerating
+    return 1;
+}
+
 void QWindowsFontDatabaseFT::populateFontDatabase()
 {
     m_families.clear();
@@ -417,8 +434,15 @@ void QWindowsFontDatabaseFT::populate(const QString &family)
     wmemcpy(lf.lfFaceName, reinterpret_cast<const wchar_t*>(family.utf16()),
             family.size() + 1);
     lf.lfPitchAndFamily = 0;
-    EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFont,
-                       (LPARAM)&m_families, 0);
+
+    if (family.isEmpty()) {
+        EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFontSub,
+                           (LPARAM)&m_families, 0);
+    } else {
+        EnumFontFamiliesEx(dummy, &lf, (FONTENUMPROC)storeFont,
+                           (LPARAM)&m_families, 0);
+    }
+
     ReleaseDC(0, dummy);
 }
 
@@ -442,30 +466,7 @@ QStringList QWindowsFontDatabaseFT::fallbacksForFamily(const QString &family, QF
     if (!result.isEmpty())
         return result;
 
-    switch (styleHint) {
-        case QFont::Times:
-            result << QString::fromLatin1("Times New Roman");
-            break;
-        case QFont::Courier:
-            result << QString::fromLatin1("Courier New");
-            break;
-        case QFont::Monospace:
-            result << QString::fromLatin1("Courier New");
-            break;
-        case QFont::Cursive:
-            result << QString::fromLatin1("Comic Sans MS");
-            break;
-        case QFont::Fantasy:
-            result << QString::fromLatin1("Impact");
-            break;
-        case QFont::Decorative:
-            result << QString::fromLatin1("Old English");
-            break;
-        case QFont::Helvetica:
-        case QFont::System:
-        default:
-            result << QString::fromLatin1("Arial");
-    }
+    result.append(QWindowsFontDatabase::familyForStyleHint(styleHint));
 
 #ifdef Q_OS_WINCE
     QSettings settings(QLatin1String("HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\FontLink\\SystemLink"), QSettings::NativeFormat);
diff --git a/src/plugins/platforms/windows/qwindowsfontdatabase_ft.h b/src/plugins/platforms/windows/qwindowsfontdatabase_ft.h
index bad6c54bf4..4bf6ac93a5 100644
--- a/src/plugins/platforms/windows/qwindowsfontdatabase_ft.h
+++ b/src/plugins/platforms/windows/qwindowsfontdatabase_ft.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,8 +49,8 @@ public:
 
     QStringList fallbacksForFamily(const QString &family, QFont::Style style, QFont::StyleHint styleHint, QChar::Script script) const;
 
-    virtual QString fontDir() const;
-    virtual QFont defaultFont() const;
+    QString fontDir() const Q_DECL_OVERRIDE;
+    QFont defaultFont() const Q_DECL_OVERRIDE;
 
 private:
     void populate(const QString &family = QString());
diff --git a/src/plugins/platforms/windows/qwindowsfontengine.cpp b/src/plugins/platforms/windows/qwindowsfontengine.cpp
index 4efedb7bc7..cfa5914ff8 100644
--- a/src/plugins/platforms/windows/qwindowsfontengine.cpp
+++ b/src/plugins/platforms/windows/qwindowsfontengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -111,11 +103,6 @@ static void resolveGetCharWidthI()
     ptrGetCharWidthI = (PtrGetCharWidthI)QSystemLibrary::resolve(QStringLiteral("gdi32"), "GetCharWidthI");
 }
 
-// defined in qtextengine_win.cpp
-typedef void *SCRIPT_CACHE;
-typedef HRESULT (WINAPI *fScriptFreeCache)(SCRIPT_CACHE *);
-extern fScriptFreeCache ScriptFreeCache;
-
 static inline quint32 getUInt(unsigned char *p)
 {
     quint32 val;
@@ -805,13 +792,34 @@ static bool addGlyphToPath(glyph_t glyph, const QFixedPoint &position, HDC hdc,
     mat.eM11.fract = mat.eM22.fract = 0;
     mat.eM21.value = mat.eM12.value = 0;
     mat.eM21.fract = mat.eM12.fract = 0;
+
+    GLYPHMETRICS gMetric;
+    memset(&gMetric, 0, sizeof(GLYPHMETRICS));
+
+#ifndef Q_OS_WINCE
+    if (metric) {
+        // If metrics requested, retrieve first using GGO_METRICS, because the returned
+        // values are incorrect for OpenType PS fonts if obtained at the same time as the
+        // glyph paths themselves (ie. with GGO_NATIVE as the format).
+        uint format = GGO_METRICS;
+        if (ttf)
+            format |= GGO_GLYPH_INDEX;
+        int res = GetGlyphOutline(hdc, glyph, format, &gMetric, 0, 0, &mat);
+        if (res == GDI_ERROR) {
+            return false;
+        }
+        // #### obey scale
+        *metric = glyph_metrics_t(gMetric.gmptGlyphOrigin.x, -gMetric.gmptGlyphOrigin.y,
+                                  (int)gMetric.gmBlackBoxX, (int)gMetric.gmBlackBoxY,
+                                  gMetric.gmCellIncX, gMetric.gmCellIncY);
+    }
+#endif
+
     uint glyphFormat = GGO_NATIVE;
 
     if (ttf)
         glyphFormat |= GGO_GLYPH_INDEX;
 
-    GLYPHMETRICS gMetric;
-    memset(&gMetric, 0, sizeof(GLYPHMETRICS));
     int bufferSize = GDI_ERROR;
     bufferSize = GetGlyphOutline(hdc, glyph, glyphFormat, &gMetric, 0, 0, &mat);
     if ((DWORD)bufferSize == GDI_ERROR) {
@@ -826,12 +834,14 @@ static bool addGlyphToPath(glyph_t glyph, const QFixedPoint &position, HDC hdc,
         return false;
     }
 
-    if(metric) {
+#ifdef Q_OS_WINCE
+    if (metric) {
         // #### obey scale
         *metric = glyph_metrics_t(gMetric.gmptGlyphOrigin.x, -gMetric.gmptGlyphOrigin.y,
                                   (int)gMetric.gmBlackBoxX, (int)gMetric.gmBlackBoxY,
                                   gMetric.gmCellIncX, gMetric.gmCellIncY);
     }
+#endif
 
     int offset = 0;
     int headerOffset = 0;
@@ -1300,7 +1310,7 @@ void QWindowsFontEngine::initFontInfo(const QFontDef &request,
     Will probably be superseded by a common Free Type font engine in Qt 5.X.
 */
 QWindowsMultiFontEngine::QWindowsMultiFontEngine(QFontEngine *fe, int script)
-    : QFontEngineMultiQPA(fe, script)
+    : QFontEngineMultiBasicImpl(fe, script)
 {
 }
 
diff --git a/src/plugins/platforms/windows/qwindowsfontengine.h b/src/plugins/platforms/windows/qwindowsfontengine.h
index 0ddf778fa0..02bc4008d1 100644
--- a/src/plugins/platforms/windows/qwindowsfontengine.h
+++ b/src/plugins/platforms/windows/qwindowsfontengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,7 +45,7 @@
 // We mean it.
 //
 
-#include <QtGui/private/qfontengine_qpa_p.h>
+#include <QtGui/private/qfontengine_p.h>
 
 #include <QtGui/QImage>
 #include <QtCore/QSharedPointer>
@@ -78,48 +70,48 @@ public:
     void initFontInfo(const QFontDef &request,
                       HDC fontHdc,  int dpi);
 
-    virtual QFixed lineThickness() const;
-    virtual Properties properties() const;
-    virtual void getUnscaledGlyph(glyph_t glyph, QPainterPath *path, glyph_metrics_t *metrics);
-    virtual FaceId faceId() const;
-    virtual bool getSfntTableData(uint tag, uchar *buffer, uint *length) const;
-    virtual int synthesized() const;
-    virtual QFixed emSquareSize() const;
+    QFixed lineThickness() const Q_DECL_OVERRIDE;
+    Properties properties() const Q_DECL_OVERRIDE;
+    void getUnscaledGlyph(glyph_t glyph, QPainterPath *path, glyph_metrics_t *metrics) Q_DECL_OVERRIDE;
+    FaceId faceId() const Q_DECL_OVERRIDE;
+    bool getSfntTableData(uint tag, uchar *buffer, uint *length) const Q_DECL_OVERRIDE;
+    int synthesized() const Q_DECL_OVERRIDE;
+    QFixed emSquareSize() const Q_DECL_OVERRIDE;
 
-    virtual glyph_t glyphIndex(uint ucs4) const;
-    virtual bool stringToCMap(const QChar *str, int len, QGlyphLayout *glyphs, int *nglyphs, ShaperFlags flags) const;
-    virtual void recalcAdvances(QGlyphLayout *glyphs, ShaperFlags) const;
+    glyph_t glyphIndex(uint ucs4) const Q_DECL_OVERRIDE;
+    bool stringToCMap(const QChar *str, int len, QGlyphLayout *glyphs, int *nglyphs, ShaperFlags flags) const Q_DECL_OVERRIDE;
+    void recalcAdvances(QGlyphLayout *glyphs, ShaperFlags) const Q_DECL_OVERRIDE;
 
-    virtual void addOutlineToPath(qreal x, qreal y, const QGlyphLayout &glyphs, QPainterPath *path, QTextItem::RenderFlags flags);
+    void addOutlineToPath(qreal x, qreal y, const QGlyphLayout &glyphs, QPainterPath *path, QTextItem::RenderFlags flags) Q_DECL_OVERRIDE;
     virtual void addGlyphsToPath(glyph_t *glyphs, QFixedPoint *positions, int nglyphs,
                          QPainterPath *path, QTextItem::RenderFlags flags);
 
     HGDIOBJ selectDesignFont() const;
 
-    virtual glyph_metrics_t boundingBox(const QGlyphLayout &glyphs);
-    virtual glyph_metrics_t boundingBox(glyph_t g) { return boundingBox(g, QTransform()); }
-    virtual glyph_metrics_t boundingBox(glyph_t g, const QTransform &t);
+    glyph_metrics_t boundingBox(const QGlyphLayout &glyphs) Q_DECL_OVERRIDE;
+    glyph_metrics_t boundingBox(glyph_t g) Q_DECL_OVERRIDE { return boundingBox(g, QTransform()); }
+    glyph_metrics_t boundingBox(glyph_t g, const QTransform &t) Q_DECL_OVERRIDE;
 
 
-    virtual QFixed ascent() const;
-    virtual QFixed descent() const;
-    virtual QFixed leading() const;
-    virtual QFixed xHeight() const;
-    virtual QFixed averageCharWidth() const;
-    virtual qreal maxCharWidth() const;
-    virtual qreal minLeftBearing() const;
-    virtual qreal minRightBearing() const;
+    QFixed ascent() const Q_DECL_OVERRIDE;
+    QFixed descent() const Q_DECL_OVERRIDE;
+    QFixed leading() const Q_DECL_OVERRIDE;
+    QFixed xHeight() const Q_DECL_OVERRIDE;
+    QFixed averageCharWidth() const Q_DECL_OVERRIDE;
+    qreal maxCharWidth() const Q_DECL_OVERRIDE;
+    qreal minLeftBearing() const Q_DECL_OVERRIDE;
+    qreal minRightBearing() const Q_DECL_OVERRIDE;
 
-    virtual QImage alphaMapForGlyph(glyph_t t) { return alphaMapForGlyph(t, QTransform()); }
-    virtual QImage alphaMapForGlyph(glyph_t, const QTransform &xform);
-    virtual QImage alphaRGBMapForGlyph(glyph_t t, QFixed subPixelPosition, const QTransform &xform);
-    virtual glyph_metrics_t alphaMapBoundingBox(glyph_t glyph, QFixed, const QTransform &matrix, GlyphFormat);
+    QImage alphaMapForGlyph(glyph_t t) Q_DECL_OVERRIDE { return alphaMapForGlyph(t, QTransform()); }
+    QImage alphaMapForGlyph(glyph_t, const QTransform &xform) Q_DECL_OVERRIDE;
+    QImage alphaRGBMapForGlyph(glyph_t t, QFixed subPixelPosition, const QTransform &xform) Q_DECL_OVERRIDE;
+    glyph_metrics_t alphaMapBoundingBox(glyph_t glyph, QFixed, const QTransform &matrix, GlyphFormat) Q_DECL_OVERRIDE;
 
-    virtual QFontEngine *cloneWithSize(qreal pixelSize) const;
-    virtual bool supportsTransformation(const QTransform &transform) const;
+    QFontEngine *cloneWithSize(qreal pixelSize) const Q_DECL_OVERRIDE;
+    bool supportsTransformation(const QTransform &transform) const Q_DECL_OVERRIDE;
 
 #ifndef Q_CC_MINGW
-    virtual void getGlyphBearings(glyph_t glyph, qreal *leftBearing = 0, qreal *rightBearing = 0);
+    void getGlyphBearings(glyph_t glyph, qreal *leftBearing = 0, qreal *rightBearing = 0) Q_DECL_OVERRIDE;
 #endif
 
     bool hasUnreliableGlyphOutline() const Q_DECL_OVERRIDE;
@@ -172,7 +164,7 @@ private:
 };
 
 
-class QWindowsMultiFontEngine : public QFontEngineMultiQPA
+class QWindowsMultiFontEngine : public QFontEngineMultiBasicImpl
 {
 public:
     explicit QWindowsMultiFontEngine(QFontEngine *fe, int script);
diff --git a/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp b/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
index 8f55e20536..0041a07fb0 100644
--- a/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
+++ b/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -574,7 +566,7 @@ QImage QWindowsFontEngineDirectWrite::imageForGlyph(glyph_t t,
 
         int size = width * height * 3;
         BYTE *alphaValues = new BYTE[size];
-        memset(alphaValues, size, 0);
+        memset(alphaValues, 0, size);
 
         hr = glyphAnalysis->CreateAlphaTexture(DWRITE_TEXTURE_CLEARTYPE_3x1,
                                                &rect,
diff --git a/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.h b/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.h
index 2da014ddc3..76c5790554 100644
--- a/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.h
+++ b/src/plugins/platforms/windows/qwindowsfontenginedirectwrite.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,7 +66,7 @@ public:
     bool getSfntTableData(uint tag, uchar *buffer, uint *length) const;
     QFixed emSquareSize() const;
 
-    virtual glyph_t glyphIndex(uint ucs4) const;
+    glyph_t glyphIndex(uint ucs4) const Q_DECL_OVERRIDE;
     bool stringToCMap(const QChar *str, int len, QGlyphLayout *glyphs, int *nglyphs, ShaperFlags flags) const;
     void recalcAdvances(QGlyphLayout *glyphs, ShaperFlags) const;
 
diff --git a/src/plugins/platforms/windows/qwindowsgdiintegration.cpp b/src/plugins/platforms/windows/qwindowsgdiintegration.cpp
index 9c8b5ed620..0372987781 100644
--- a/src/plugins/platforms/windows/qwindowsgdiintegration.cpp
+++ b/src/plugins/platforms/windows/qwindowsgdiintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsgdiintegration.h b/src/plugins/platforms/windows/qwindowsgdiintegration.h
index 0bf44d5439..43f81caf69 100644
--- a/src/plugins/platforms/windows/qwindowsgdiintegration.h
+++ b/src/plugins/platforms/windows/qwindowsgdiintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsgdinativeinterface.cpp b/src/plugins/platforms/windows/qwindowsgdinativeinterface.cpp
index c1b0c139c9..b25fec06c7 100644
--- a/src/plugins/platforms/windows/qwindowsgdinativeinterface.cpp
+++ b/src/plugins/platforms/windows/qwindowsgdinativeinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsgdinativeinterface.h b/src/plugins/platforms/windows/qwindowsgdinativeinterface.h
index 3aa3a0b175..0551b29685 100644
--- a/src/plugins/platforms/windows/qwindowsgdinativeinterface.h
+++ b/src/plugins/platforms/windows/qwindowsgdinativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsglcontext.cpp b/src/plugins/platforms/windows/qwindowsglcontext.cpp
index eaa4eca84e..0e3e6826ec 100644
--- a/src/plugins/platforms/windows/qwindowsglcontext.cpp
+++ b/src/plugins/platforms/windows/qwindowsglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,6 +40,7 @@
 #include <QtCore/QSysInfo>
 #include <QtGui/QGuiApplication>
 #include <qpa/qplatformnativeinterface.h>
+#include <QtPlatformHeaders/QWGLNativeContext>
 
 #include <algorithm>
 
@@ -144,6 +137,131 @@
 
 QT_BEGIN_NAMESPACE
 
+QWindowsOpengl32DLL QOpenGLStaticContext::opengl32;
+
+void *QWindowsOpengl32DLL::resolve(const char *name)
+{
+#ifndef Q_OS_WINCE
+    void *proc = m_lib ? (void *) ::GetProcAddress(m_lib, name) : 0;
+#else
+    void *proc = m_lib ? (void *) ::GetProcAddress(m_lib, (const wchar_t *) QString::fromLatin1(name).utf16()) : 0;
+#endif
+    if (!proc)
+        qErrnoWarning(::GetLastError(), "Failed to resolve OpenGL function %s", name);
+
+    return proc;
+}
+
+bool QWindowsOpengl32DLL::init(bool softwareRendering)
+{
+    const QByteArray opengl32 = QByteArrayLiteral("opengl32.dll");
+    const QByteArray swopengl = QByteArrayLiteral("opengl32sw.dll");
+
+    QByteArray openglDll = qgetenv("QT_OPENGL_DLL");
+    if (openglDll.isEmpty())
+        openglDll = softwareRendering ? swopengl : opengl32;
+
+    openglDll = openglDll.toLower();
+    m_nonOpengl32 = openglDll != opengl32;
+
+    qCDebug(lcQpaGl) << "Qt: Using WGL and OpenGL from" << openglDll;
+
+    m_lib = ::LoadLibraryA(openglDll.constData());
+    if (!m_lib) {
+        qErrnoWarning(::GetLastError(), "Failed to load %s", openglDll.constData());
+        return false;
+    }
+
+    if (moduleIsNotOpengl32()) {
+        // Load opengl32.dll always. GDI functions like ChoosePixelFormat do
+        // GetModuleHandle for opengl32.dll and behave differently (and call back into
+        // opengl32) when the module is present. This is fine for dummy contexts and windows.
+        ::LoadLibraryA("opengl32.dll");
+    }
+
+    wglCreateContext = reinterpret_cast<HGLRC (WINAPI *)(HDC)>(resolve("wglCreateContext"));
+    wglDeleteContext = reinterpret_cast<BOOL (WINAPI *)(HGLRC)>(resolve("wglDeleteContext"));
+    wglGetCurrentContext = reinterpret_cast<HGLRC (WINAPI *)()>(resolve("wglGetCurrentContext"));
+    wglGetCurrentDC = reinterpret_cast<HDC (WINAPI *)()>(resolve("wglGetCurrentDC"));
+    wglGetProcAddress = reinterpret_cast<PROC (WINAPI *)(LPCSTR)>(resolve("wglGetProcAddress"));
+    wglMakeCurrent = reinterpret_cast<BOOL (WINAPI *)(HDC, HGLRC)>(resolve("wglMakeCurrent"));
+    wglShareLists = reinterpret_cast<BOOL (WINAPI *)(HGLRC, HGLRC)>(resolve("wglShareLists"));
+    wglSwapBuffers = reinterpret_cast<BOOL (WINAPI *)(HDC)>(resolve("wglSwapBuffers"));
+    wglSetPixelFormat = reinterpret_cast<BOOL (WINAPI *)(HDC, int, const PIXELFORMATDESCRIPTOR *)>(resolve("wglSetPixelFormat"));
+
+    glBindTexture = reinterpret_cast<void (APIENTRY *)(GLenum , GLuint )>(resolve("glBindTexture"));
+    glBlendFunc = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum )>(resolve("glBlendFunc"));
+    glClear = reinterpret_cast<void (APIENTRY *)(GLbitfield )>(resolve("glClear"));
+    glClearColor = reinterpret_cast<void (APIENTRY *)(GLfloat , GLfloat , GLfloat , GLfloat )>(resolve("glClearColor"));
+    glClearStencil = reinterpret_cast<void (APIENTRY *)(GLint )>(resolve("glClearStencil"));
+    glColorMask = reinterpret_cast<void (APIENTRY *)(GLboolean , GLboolean , GLboolean , GLboolean )>(resolve("glColorMask"));
+    glCopyTexImage2D = reinterpret_cast<void (APIENTRY *)(GLenum , GLint , GLenum , GLint , GLint , GLsizei , GLsizei , GLint )>(resolve("glCopyTexImage2D"));
+    glCopyTexSubImage2D = reinterpret_cast<void (APIENTRY *)(GLenum , GLint , GLint , GLint , GLint , GLint , GLsizei , GLsizei )>(resolve("glCopyTexSubImage2D"));
+    glCullFace = reinterpret_cast<void (APIENTRY *)(GLenum )>(resolve("glCullFace"));
+    glDeleteTextures = reinterpret_cast<void (APIENTRY *)(GLsizei , const GLuint *)>(resolve("glDeleteTextures"));
+    glDepthFunc = reinterpret_cast<void (APIENTRY *)(GLenum )>(resolve("glDepthFunc"));
+    glDepthMask = reinterpret_cast<void (APIENTRY *)(GLboolean )>(resolve("glDepthMask"));
+    glDisable = reinterpret_cast<void (APIENTRY *)(GLenum )>(resolve("glDisable"));
+    glDrawArrays = reinterpret_cast<void (APIENTRY *)(GLenum , GLint , GLsizei )>(resolve("glDrawArrays"));
+    glDrawElements = reinterpret_cast<void (APIENTRY *)(GLenum , GLsizei , GLenum , const GLvoid *)>(resolve("glDrawElements"));
+    glEnable = reinterpret_cast<void (APIENTRY *)(GLenum )>(resolve("glEnable"));
+    glFinish = reinterpret_cast<void (APIENTRY *)()>(resolve("glFinish"));
+    glFlush = reinterpret_cast<void (APIENTRY *)()>(resolve("glFlush"));
+    glFrontFace = reinterpret_cast<void (APIENTRY *)(GLenum )>(resolve("glFrontFace"));
+    glGenTextures = reinterpret_cast<void (APIENTRY *)(GLsizei , GLuint *)>(resolve("glGenTextures"));
+    glGetBooleanv = reinterpret_cast<void (APIENTRY *)(GLenum , GLboolean *)>(resolve("glGetBooleanv"));
+    glGetError = reinterpret_cast<GLenum (APIENTRY *)()>(resolve("glGetError"));
+    glGetFloatv = reinterpret_cast<void (APIENTRY *)(GLenum , GLfloat *)>(resolve("glGetFloatv"));
+    glGetIntegerv = reinterpret_cast<void (APIENTRY *)(GLenum , GLint *)>(resolve("glGetIntegerv"));
+    glGetString = reinterpret_cast<const GLubyte * (APIENTRY *)(GLenum )>(resolve("glGetString"));
+    glGetTexParameterfv = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , GLfloat *)>(resolve("glGetTexParameterfv"));
+    glGetTexParameteriv = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , GLint *)>(resolve("glGetTexParameteriv"));
+    glHint = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum )>(resolve("glHint"));
+    glIsEnabled = reinterpret_cast<GLboolean (APIENTRY *)(GLenum )>(resolve("glIsEnabled"));
+    glIsTexture = reinterpret_cast<GLboolean (APIENTRY *)(GLuint )>(resolve("glIsTexture"));
+    glLineWidth = reinterpret_cast<void (APIENTRY *)(GLfloat )>(resolve("glLineWidth"));
+    glPixelStorei = reinterpret_cast<void (APIENTRY *)(GLenum , GLint )>(resolve("glPixelStorei"));
+    glPolygonOffset = reinterpret_cast<void (APIENTRY *)(GLfloat , GLfloat )>(resolve("glPolygonOffset"));
+    glReadPixels = reinterpret_cast<void (APIENTRY *)(GLint , GLint , GLsizei , GLsizei , GLenum , GLenum , GLvoid *)>(resolve("glReadPixels"));
+    glScissor = reinterpret_cast<void (APIENTRY *)(GLint , GLint , GLsizei , GLsizei )>(resolve("glScissor"));
+    glStencilFunc = reinterpret_cast<void (APIENTRY *)(GLenum , GLint , GLuint )>(resolve("glStencilFunc"));
+    glStencilMask = reinterpret_cast<void (APIENTRY *)(GLuint )>(resolve("glStencilMask"));
+    glStencilOp = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , GLenum )>(resolve("glStencilOp"));
+    glTexImage2D = reinterpret_cast<void (APIENTRY *)(GLenum , GLint , GLint , GLsizei , GLsizei , GLint , GLenum , GLenum , const GLvoid *)>(resolve("glTexImage2D"));
+    glTexParameterf = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , GLfloat )>(resolve("glTexParameterf"));
+    glTexParameterfv = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , const GLfloat *)>(resolve("glTexParameterfv"));
+    glTexParameteri = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , GLint )>(resolve("glTexParameteri"));
+    glTexParameteriv = reinterpret_cast<void (APIENTRY *)(GLenum , GLenum , const GLint *)>(resolve("glTexParameteriv"));
+    glTexSubImage2D = reinterpret_cast<void (APIENTRY *)(GLenum , GLint , GLint , GLint , GLsizei , GLsizei , GLenum , GLenum , const GLvoid *)>(resolve("glTexSubImage2D"));
+    glViewport = reinterpret_cast<void (APIENTRY *)(GLint , GLint , GLsizei , GLsizei )>(resolve("glViewport"));
+
+    glClearDepth = reinterpret_cast<void (APIENTRY *)(GLdouble )>(resolve("glClearDepth"));
+    glDepthRange = reinterpret_cast<void (APIENTRY *)(GLdouble , GLdouble )>(resolve("glDepthRange"));
+
+    return wglCreateContext && glBindTexture && glClearDepth;
+}
+
+BOOL QWindowsOpengl32DLL::swapBuffers(HDC dc)
+{
+    if (moduleIsNotOpengl32())
+        return wglSwapBuffers(dc);
+    else
+        return SwapBuffers(dc);
+}
+
+BOOL QWindowsOpengl32DLL::setPixelFormat(HDC dc, int pf, const PIXELFORMATDESCRIPTOR *pfd)
+{
+    if (moduleIsNotOpengl32())
+        return wglSetPixelFormat(dc, pf, pfd);
+    else
+        return SetPixelFormat(dc, pf, pfd);
+}
+
+QWindowsOpenGLContext *QOpenGLStaticContext::createContext(QOpenGLContext *context)
+{
+    return new QWindowsGLContext(this, context);
+}
+
 template <class MaskType, class FlagType> inline bool testFlag(MaskType mask, FlagType flag)
 {
     return (mask & MaskType(flag)) != 0;
@@ -210,10 +328,11 @@ static inline bool
                        bool ignoreGLSupport = false) // ARB format may not contain it.
 {
     const bool pixmapRequested = testFlag(additional.formatFlags, QWindowsGLRenderToPixmap);
-    return (ignoreGLSupport || testFlag(pfd.dwFlags, PFD_SUPPORT_OPENGL))
-        && testFlag(pfd.dwFlags, PFD_DRAW_TO_BITMAP) == pixmapRequested
-        && hasGLOverlay(pfd) == testFlag(additional.formatFlags, QWindowsGLOverlay)
-        && (!pixmapRequested || pfd.cColorBits == additional.pixmapDepth);
+    const bool pixmapOk = !pixmapRequested || testFlag(pfd.dwFlags, PFD_DRAW_TO_BITMAP);
+    const bool colorOk =  !pixmapRequested || pfd.cColorBits == additional.pixmapDepth;
+    const bool glOk = ignoreGLSupport || testFlag(pfd.dwFlags, PFD_SUPPORT_OPENGL);
+    const bool overlayOk = hasGLOverlay(pfd) == testFlag(additional.formatFlags, QWindowsGLOverlay);
+    return pixmapOk && glOk && overlayOk && colorOk;
 }
 
 static void describeFormats(HDC hdc)
@@ -299,10 +418,23 @@ static PIXELFORMATDESCRIPTOR
 // over the available formats to find the best one.
 // Note: As of Windows 7, it seems direct-rendering is handled, so,
 // the code might be obsolete?
+//
+// NB! When using an implementation with a name different than opengl32.dll
+// this code path should not be used since it will result in a mess due to GDI
+// relying on and possibly calling back into functions in opengl32.dll (and not
+// the one we are using). This is not a problem usually since for Mesa, which
+// we are most likely to ship with a name other than opengl32.dll, the ARB code
+// path should work. Hence the early bail out below.
+//
 static int choosePixelFormat(HDC hdc, const QSurfaceFormat &format,
                             const QWindowsOpenGLAdditionalFormat &additional,
                             PIXELFORMATDESCRIPTOR *obtainedPfd)
 {
+    if (QOpenGLStaticContext::opengl32.moduleIsNotOpengl32()) {
+        qWarning("%s: Attempted to use GDI functions with a non-opengl32.dll library", Q_FUNC_INFO);
+        return 0;
+    }
+
     // 1) Try ChoosePixelFormat().
     PIXELFORMATDESCRIPTOR requestedPfd = qPixelFormatFromSurfaceFormat(format, QWindowsGLDirectRendering);
     initPixelFormatDescriptor(obtainedPfd);
@@ -352,12 +484,12 @@ static int choosePixelFormat(HDC hdc, const QSurfaceFormat &format,
 
 static inline HGLRC createContext(HDC hdc, HGLRC shared)
 {
-    HGLRC result = wglCreateContext(hdc);
+    HGLRC result = QOpenGLStaticContext::opengl32.wglCreateContext(hdc);
     if (!result) {
         qErrnoWarning("%s: wglCreateContext failed.", __FUNCTION__);
         return 0;
     }
-    if (shared && !wglShareLists(shared, result))
+    if (shared && !QOpenGLStaticContext::opengl32.wglShareLists(shared, result))
         qErrnoWarning("%s: wglShareLists() failed.", __FUNCTION__);
     return result;
 }
@@ -623,7 +755,7 @@ static HGLRC createContext(const QOpenGLStaticContext &staticContext,
     if (!result) {
         QString message;
         QDebug(&message).nospace() << __FUNCTION__ << ": wglCreateContextAttribsARB() failed (GL error code: 0x"
-            << hex << glGetError() << dec << ") for format: " << format << ", shared context: " << shared;
+            << hex << staticContext.opengl32.glGetError() << dec << ") for format: " << format << ", shared context: " << shared;
         qErrnoWarning("%s", qPrintable(message));
     }
     return result;
@@ -648,16 +780,17 @@ static inline HGLRC createDummyGLContext(HDC dc)
     initPixelFormatDescriptor(&pixelFormDescriptor);
     pixelFormDescriptor.dwFlags = PFD_SUPPORT_OPENGL | PFD_DRAW_TO_WINDOW | PFD_GENERIC_FORMAT;
     pixelFormDescriptor.iPixelType = PFD_TYPE_RGBA;
+    // Use the GDI variant, for the dummy this is fine, even when using something other than opengl32.dll.
     const int pixelFormat = ChoosePixelFormat(dc, &pixelFormDescriptor);
     if (!pixelFormat) {
         qErrnoWarning("%s: ChoosePixelFormat failed.", __FUNCTION__);
         return 0;
     }
-    if (!SetPixelFormat(dc, pixelFormat, &pixelFormDescriptor)) {
+    if (!QOpenGLStaticContext::opengl32.setPixelFormat(dc, pixelFormat, &pixelFormDescriptor)) {
         qErrnoWarning("%s: SetPixelFormat failed.", __FUNCTION__);
         return 0;
     }
-    HGLRC rc = wglCreateContext(dc);
+    HGLRC rc = QOpenGLStaticContext::opengl32.wglCreateContext(dc);
     if (!rc) {
         qErrnoWarning("%s: wglCreateContext failed.", __FUNCTION__);
         return 0;
@@ -668,8 +801,8 @@ static inline HGLRC createDummyGLContext(HDC dc)
 static inline QOpenGLContextData currentOpenGLContextData()
 {
     QOpenGLContextData result;
-    result.hdc = wglGetCurrentDC();
-    result.renderingContext = wglGetCurrentContext();
+    result.hdc = QOpenGLStaticContext::opengl32.wglGetCurrentDC();
+    result.renderingContext = QOpenGLStaticContext::opengl32.wglGetCurrentContext();
     return result;
 }
 
@@ -721,7 +854,7 @@ QWindowsOpenGLContextFormat QWindowsOpenGLContextFormat::current()
     }
     // v3 onwards
     GLint value = 0;
-    glGetIntegerv(GL_CONTEXT_FLAGS, &value);
+    QOpenGLStaticContext::opengl32.glGetIntegerv(GL_CONTEXT_FLAGS, &value);
     if (!(value & GL_CONTEXT_FLAG_FORWARD_COMPATIBLE_BIT))
         result.options |= QSurfaceFormat::DeprecatedFunctions;
     if (value & GL_CONTEXT_FLAG_DEBUG_BIT)
@@ -730,7 +863,7 @@ QWindowsOpenGLContextFormat QWindowsOpenGLContextFormat::current()
         return result;
     // v3.2 onwards: Profiles
     value = 0;
-    glGetIntegerv(GL_CONTEXT_PROFILE_MASK, &value);
+    QOpenGLStaticContext::opengl32.glGetIntegerv(GL_CONTEXT_PROFILE_MASK, &value);
     if (value & GL_CONTEXT_CORE_PROFILE_BIT)
         result.profile = QSurfaceFormat::CoreProfile;
     else if (value & GL_CONTEXT_COMPATIBILITY_PROFILE_BIT)
@@ -784,15 +917,15 @@ QOpenGLTemporaryContext::QOpenGLTemporaryContext() :
     m_previous(currentOpenGLContextData()),
     m_current(createDummyWindowOpenGLContextData())
 {
-    wglMakeCurrent(m_current.hdc, m_current.renderingContext);
+    QOpenGLStaticContext::opengl32.wglMakeCurrent(m_current.hdc, m_current.renderingContext);
 }
 
 QOpenGLTemporaryContext::~QOpenGLTemporaryContext()
 {
-    wglMakeCurrent(m_previous.hdc, m_previous.renderingContext);
+    QOpenGLStaticContext::opengl32.wglMakeCurrent(m_previous.hdc, m_previous.renderingContext);
     ReleaseDC(m_current.hwnd, m_current.hdc);
     DestroyWindow(m_current.hwnd);
-    wglDeleteContext(m_current.renderingContext);
+    QOpenGLStaticContext::opengl32.wglDeleteContext(m_current.renderingContext);
 }
 
 /*!
@@ -807,6 +940,11 @@ QOpenGLTemporaryContext::~QOpenGLTemporaryContext()
 
     Functions pending integration in the next version of OpenGL are post-fixed ARB.
 
+    No WGL or OpenGL functions are called directly from the windows plugin. Instead, the
+    static context loads opengl32.dll and resolves the necessary functions. This allows
+    building the plugin without linking to opengl32 and enables QT_OPENGL_DYNAMIC builds
+    where both the EGL and WGL (this) based implementation of the context are built.
+
     \note Initialization requires an active context (see create()).
 
     \sa QWindowsGLContext
@@ -822,11 +960,11 @@ QOpenGLStaticContext::QOpenGLStaticContext() :
     extensionNames(QOpenGLStaticContext::getGlString(GL_EXTENSIONS)),
     extensions(0),
     defaultFormat(QWindowsOpenGLContextFormat::current()),
-    wglGetPixelFormatAttribIVARB((WglGetPixelFormatAttribIVARB)wglGetProcAddress("wglGetPixelFormatAttribivARB")),
-    wglChoosePixelFormatARB((WglChoosePixelFormatARB)wglGetProcAddress("wglChoosePixelFormatARB")),
-    wglCreateContextAttribsARB((WglCreateContextAttribsARB)wglGetProcAddress("wglCreateContextAttribsARB")),
-    wglSwapInternalExt((WglSwapInternalExt)wglGetProcAddress("wglSwapIntervalEXT")),
-    wglGetSwapInternalExt((WglGetSwapInternalExt)wglGetProcAddress("wglGetSwapIntervalEXT"))
+    wglGetPixelFormatAttribIVARB((WglGetPixelFormatAttribIVARB)QOpenGLStaticContext::opengl32.wglGetProcAddress("wglGetPixelFormatAttribivARB")),
+    wglChoosePixelFormatARB((WglChoosePixelFormatARB)QOpenGLStaticContext::opengl32.wglGetProcAddress("wglChoosePixelFormatARB")),
+    wglCreateContextAttribsARB((WglCreateContextAttribsARB)QOpenGLStaticContext::opengl32.wglGetProcAddress("wglCreateContextAttribsARB")),
+    wglSwapInternalExt((WglSwapInternalExt)QOpenGLStaticContext::opengl32.wglGetProcAddress("wglSwapIntervalEXT")),
+    wglGetSwapInternalExt((WglGetSwapInternalExt)QOpenGLStaticContext::opengl32.wglGetProcAddress("wglGetSwapIntervalEXT"))
 {
     if (extensionNames.startsWith(SAMPLE_BUFFER_EXTENSION " ")
             || extensionNames.indexOf(" " SAMPLE_BUFFER_EXTENSION " ") != -1)
@@ -835,16 +973,21 @@ QOpenGLStaticContext::QOpenGLStaticContext() :
 
 QByteArray QOpenGLStaticContext::getGlString(unsigned int which)
 {
-    if (const GLubyte *s = glGetString(which))
+    if (const GLubyte *s = opengl32.glGetString(which))
         return QByteArray((const char*)s);
     return QByteArray();
 }
 
-QOpenGLStaticContext *QOpenGLStaticContext::create()
+QOpenGLStaticContext *QOpenGLStaticContext::create(bool softwareRendering)
 {
+    if (!opengl32.init(softwareRendering)) {
+        qWarning("%s: Failed to load and resolve WGL/OpenGL functions", Q_FUNC_INFO);
+        return 0;
+    }
+
     // We need a current context for wglGetProcAdress()/getGLString() to work.
     QScopedPointer<QOpenGLTemporaryContext> temporaryContext;
-    if (!wglGetCurrentContext())
+    if (!QOpenGLStaticContext::opengl32.wglGetCurrentContext())
         temporaryContext.reset(new QOpenGLTemporaryContext);
     QOpenGLStaticContext *result = new QOpenGLStaticContext;
     qCDebug(lcQpaGl) << __FUNCTION__ << *result;
@@ -881,15 +1024,61 @@ QDebug operator<<(QDebug d, const QOpenGLStaticContext &s)
     \ingroup qt-lighthouse-win
 */
 
-QWindowsGLContext::QWindowsGLContext(const QOpenGLStaticContextPtr &staticContext,
+QWindowsGLContext::QWindowsGLContext(QOpenGLStaticContext *staticContext,
                                      QOpenGLContext *context) :
     m_staticContext(staticContext),
     m_context(context),
     m_renderingContext(0),
     m_pixelFormat(0),
     m_extensionsUsed(false),
-    m_swapInterval(-1)
+    m_swapInterval(-1),
+    m_ownsContext(true)
 {
+    if (!m_staticContext) // Something went very wrong. Stop here, isValid() will return false.
+        return;
+
+    QVariant nativeHandle = context->nativeHandle();
+    if (!nativeHandle.isNull()) {
+        // Adopt and existing context.
+        if (!nativeHandle.canConvert<QWGLNativeContext>()) {
+            qWarning("QWindowsGLContext: Requires a QWGLNativeContext");
+            return;
+        }
+        QWGLNativeContext handle = nativeHandle.value<QWGLNativeContext>();
+        HGLRC wglcontext = handle.context();
+        HWND wnd = handle.window();
+        if (!wglcontext || !wnd) {
+            qWarning("QWindowsGLContext: No context and window given");
+            return;
+        }
+
+        HDC dc = GetDC(wnd);
+        // A window with an associated pixel format is mandatory.
+        // When no SetPixelFormat() call has been made, the following will fail.
+        m_pixelFormat = GetPixelFormat(dc);
+        bool ok = m_pixelFormat != 0;
+        if (!ok)
+            qWarning("QWindowsGLContext: Failed to get pixel format");
+        ok = DescribePixelFormat(dc, m_pixelFormat, sizeof(PIXELFORMATDESCRIPTOR), &m_obtainedPixelFormatDescriptor);
+        if (!ok) {
+            qWarning("QWindowsGLContext: Failed to describe pixel format");
+        } else {
+            QWindowsOpenGLAdditionalFormat obtainedAdditional;
+            m_obtainedFormat = GDI::qSurfaceFormatFromPixelFormat(m_obtainedPixelFormatDescriptor, &obtainedAdditional);
+            m_renderingContext = wglcontext;
+            ok = updateObtainedParams(dc);
+        }
+
+        ReleaseDC(wnd, dc);
+
+        if (ok)
+            m_ownsContext = false;
+        else
+            m_renderingContext = 0;
+
+        return;
+    }
+
     QSurfaceFormat format = context->format();
     if (format.renderableType() == QSurfaceFormat::DefaultRenderableType)
         format.setRenderableType(QSurfaceFormat::OpenGL);
@@ -901,7 +1090,7 @@ QWindowsGLContext::QWindowsGLContext(const QOpenGLStaticContextPtr &staticContex
     static bool opengl32dll = false;
     if (!opengl32dll) {
         GLint params;
-        glGetIntegerv(GL_DEPTH_BITS, &params);
+        staticContext->opengl32.glGetIntegerv(GL_DEPTH_BITS, &params);
         opengl32dll = true;
     }
 
@@ -912,7 +1101,7 @@ QWindowsGLContext::QWindowsGLContext(const QOpenGLStaticContextPtr &staticContex
     HWND dummyWindow = 0;
     HDC hdc = 0;
     bool tryExtensions = false;
-    int obtainedSwapInternal = -1;
+    int obtainedSwapInterval = -1;
     do {
         dummyWindow = createDummyGLWindow();
         if (!dummyWindow)
@@ -954,7 +1143,7 @@ QWindowsGLContext::QWindowsGLContext(const QOpenGLStaticContextPtr &staticContex
             qWarning("%s: Unable find a suitable pixel format.", __FUNCTION__);
             break;
         }
-        if (!SetPixelFormat(hdc, m_pixelFormat, &m_obtainedPixelFormatDescriptor)) {
+        if (!QOpenGLStaticContext::opengl32.setPixelFormat(hdc, m_pixelFormat, &m_obtainedPixelFormatDescriptor)) {
             qErrnoWarning("SetPixelFormat failed.");
             break;
         }
@@ -978,18 +1167,16 @@ QWindowsGLContext::QWindowsGLContext(const QOpenGLStaticContextPtr &staticContex
         }
 
         // Query obtained parameters and apply swap interval.
-        if (!wglMakeCurrent(hdc, m_renderingContext)) {
-            qWarning("Failed to make context current.");
+        if (!updateObtainedParams(hdc, &obtainedSwapInterval))
             break;
-        }
 
-        QWindowsOpenGLContextFormat::current().apply(&m_obtainedFormat);
+    } while (false);
 
-        if (m_staticContext->wglGetSwapInternalExt)
-            obtainedSwapInternal = m_staticContext->wglGetSwapInternalExt();
+    // Make the HGLRC retrievable via QOpenGLContext::nativeHandle().
+    // Do not provide the window since it is the dummy one and it is about to disappear.
+    if (m_renderingContext)
+        context->setNativeHandle(QVariant::fromValue<QWGLNativeContext>(QWGLNativeContext(m_renderingContext, 0)));
 
-        wglMakeCurrent(0, 0);
-    } while (false);
     if (hdc)
         ReleaseDC(dummyWindow, hdc);
     if (dummyWindow)
@@ -998,18 +1185,37 @@ QWindowsGLContext::QWindowsGLContext(const QOpenGLStaticContextPtr &staticContex
     qCDebug(lcQpaGl) << __FUNCTION__ << this << (tryExtensions ? "ARB" : "GDI")
         << " requested: " << context->format()
         << "\n    obtained #" << m_pixelFormat << (m_extensionsUsed ? "ARB" : "GDI") << m_obtainedFormat
-        << "\n    " << m_obtainedPixelFormatDescriptor << " swap interval: " << obtainedSwapInternal
+        << "\n    " << m_obtainedPixelFormatDescriptor << " swap interval: " << obtainedSwapInterval
         << "\n    default: " << m_staticContext->defaultFormat
         << "\n    HGLRC=" << m_renderingContext;
 }
 
 QWindowsGLContext::~QWindowsGLContext()
 {
-    if (m_renderingContext)
-        wglDeleteContext(m_renderingContext);
+    if (m_renderingContext && m_ownsContext)
+        QOpenGLStaticContext::opengl32.wglDeleteContext(m_renderingContext);
     releaseDCs();
 }
 
+bool QWindowsGLContext::updateObtainedParams(HDC hdc, int *obtainedSwapInterval)
+{
+    HGLRC prevContext = QOpenGLStaticContext::opengl32.wglGetCurrentContext();
+    HDC prevSurface = QOpenGLStaticContext::opengl32.wglGetCurrentDC();
+
+    if (!QOpenGLStaticContext::opengl32.wglMakeCurrent(hdc, m_renderingContext)) {
+        qWarning("Failed to make context current.");
+        return false;
+    }
+
+    QWindowsOpenGLContextFormat::current().apply(&m_obtainedFormat);
+
+    if (m_staticContext->wglGetSwapInternalExt && obtainedSwapInterval)
+        *obtainedSwapInterval = m_staticContext->wglGetSwapInternalExt();
+
+    QOpenGLStaticContext::opengl32.wglMakeCurrent(prevSurface, prevContext);
+    return true;
+}
+
 void QWindowsGLContext::releaseDCs()
 {
     const QOpenGLContextData *end = m_windowContexts.end();
@@ -1043,11 +1249,11 @@ void QWindowsGLContext::swapBuffers(QPlatformSurface *surface)
 {
     if (QWindowsContext::verbose > 1)
         qCDebug(lcQpaGl) << __FUNCTION__ << surface;
-    if (const QOpenGLContextData *contextData = findByHWND(m_windowContexts, handleOf(surface))) {
-        SwapBuffers(contextData->hdc);
-    } else {
+
+    if (const QOpenGLContextData *contextData = findByHWND(m_windowContexts, handleOf(surface)))
+        QOpenGLStaticContext::opengl32.swapBuffers(contextData->hdc);
+    else
         qWarning("%s: Cannot find window %p", __FUNCTION__, handleOf(surface));
-    }
 }
 
 bool QWindowsGLContext::makeCurrent(QPlatformSurface *surface)
@@ -1066,11 +1272,11 @@ bool QWindowsGLContext::makeCurrent(QPlatformSurface *surface)
         // Repeated calls to wglMakeCurrent when vsync is enabled in the driver will
         // often result in 100% cpuload. This check is cheap and avoids the problem.
         // This is reproducable on NVidia cards and Intel onboard chips.
-        if (wglGetCurrentContext() == contextData->renderingContext
-                && wglGetCurrentDC() == contextData->hdc) {
+        if (QOpenGLStaticContext::opengl32.wglGetCurrentContext() == contextData->renderingContext
+                && QOpenGLStaticContext::opengl32.wglGetCurrentDC() == contextData->hdc) {
             return true;
         }
-        return wglMakeCurrent(contextData->hdc, contextData->renderingContext);
+        return QOpenGLStaticContext::opengl32.wglMakeCurrent(contextData->hdc, contextData->renderingContext);
     }
     // Create a new entry.
     const QOpenGLContextData newContext(m_renderingContext, hwnd, GetDC(hwnd));
@@ -1079,7 +1285,7 @@ bool QWindowsGLContext::makeCurrent(QPlatformSurface *surface)
     // Initialize pixel format first time. This will apply to
     // the HWND as well and  must be done only once.
     if (!window->testFlag(QWindowsWindow::OpenGlPixelFormatInitialized)) {
-        if (!SetPixelFormat(newContext.hdc, m_pixelFormat, &m_obtainedPixelFormatDescriptor)) {
+        if (!QOpenGLStaticContext::opengl32.setPixelFormat(newContext.hdc, m_pixelFormat, &m_obtainedPixelFormatDescriptor)) {
             qErrnoWarning("%s: SetPixelFormat() failed", __FUNCTION__);
             ReleaseDC(newContext.hwnd, newContext.hdc);
             return false;
@@ -1090,7 +1296,7 @@ bool QWindowsGLContext::makeCurrent(QPlatformSurface *surface)
     }
     m_windowContexts.append(newContext);
 
-    bool success = wglMakeCurrent(newContext.hdc, newContext.renderingContext);
+    bool success = QOpenGLStaticContext::opengl32.wglMakeCurrent(newContext.hdc, newContext.renderingContext);
 
     // Set the swap interval
     if (m_staticContext->wglSwapInternalExt) {
@@ -1110,17 +1316,83 @@ void QWindowsGLContext::doneCurrent()
     if (QWindowsContext::verbose > 1)
         qCDebug(lcQpaGl) << __FUNCTION__ << this << m_windowContexts.size() << "contexts";
 #endif // DEBUG_GL
-    wglMakeCurrent(0, 0);
+    QOpenGLStaticContext::opengl32.wglMakeCurrent(0, 0);
     releaseDCs();
 }
 
-QWindowsGLContext::GL_Proc QWindowsGLContext::getProcAddress(const QByteArray &procName)
+QFunctionPointer QWindowsGLContext::getProcAddress(const QByteArray &procName)
 {
-    // TODO: Will that work with the calling conventions?
-    GL_Proc procAddress = reinterpret_cast<GL_Proc>(wglGetProcAddress(procName.constData()));
+    // We support AllGLFunctionsQueryable, which means this function must be able to
+    // return a function pointer even for functions that are in GL.h and exported
+    // normally from opengl32.dll. wglGetProcAddress() is not guaranteed to work for such
+    // functions, however in QT_OPENGL_DYNAMIC builds QOpenGLFunctions will just blindly
+    // call into here for _any_ OpenGL function. Hence the need to handle these specially
+    // here. The list has to match QOpenGLFunctions. See
+    // QOpenGLFunctionsPrivate::QOpenGLFunctionsPrivate(QOpenGLContext *).
+    static struct StdFunc {
+        const char *name;
+        void *func;
+    } standardFuncs[] = {
+        { "glBindTexture", (void *) QOpenGLStaticContext::opengl32.glBindTexture },
+        { "glBlendFunc", (void *) QOpenGLStaticContext::opengl32.glBlendFunc },
+        { "glClear", (void *) QOpenGLStaticContext::opengl32.glClear },
+        { "glClearColor", (void *) QOpenGLStaticContext::opengl32.glClearColor },
+        { "glClearStencil", (void *) QOpenGLStaticContext::opengl32.glClearStencil },
+        { "glColorMask", (void *) QOpenGLStaticContext::opengl32.glColorMask },
+        { "glCopyTexImage2D", (void *) QOpenGLStaticContext::opengl32.glCopyTexImage2D },
+        { "glCopyTexSubImage2D", (void *) QOpenGLStaticContext::opengl32.glCopyTexSubImage2D },
+        { "glCullFace", (void *) QOpenGLStaticContext::opengl32.glCullFace },
+        { "glDeleteTextures", (void *) QOpenGLStaticContext::opengl32.glDeleteTextures },
+        { "glDepthFunc", (void *) QOpenGLStaticContext::opengl32.glDepthFunc },
+        { "glDepthMask", (void *) QOpenGLStaticContext::opengl32.glDepthMask },
+        { "glDisable", (void *) QOpenGLStaticContext::opengl32.glDisable },
+        { "glDrawArrays", (void *) QOpenGLStaticContext::opengl32.glDrawArrays },
+        { "glDrawElements", (void *) QOpenGLStaticContext::opengl32.glDrawElements },
+        { "glEnable", (void *) QOpenGLStaticContext::opengl32.glEnable },
+        { "glFinish", (void *) QOpenGLStaticContext::opengl32.glFinish },
+        { "glFlush", (void *) QOpenGLStaticContext::opengl32.glFlush },
+        { "glFrontFace", (void *) QOpenGLStaticContext::opengl32.glFrontFace },
+        { "glGenTextures", (void *) QOpenGLStaticContext::opengl32.glGenTextures },
+        { "glGetBooleanv", (void *) QOpenGLStaticContext::opengl32.glGetBooleanv },
+        { "glGetError", (void *) QOpenGLStaticContext::opengl32.glGetError },
+        { "glGetFloatv", (void *) QOpenGLStaticContext::opengl32.glGetFloatv },
+        { "glGetIntegerv", (void *) QOpenGLStaticContext::opengl32.glGetIntegerv },
+        { "glGetString", (void *) QOpenGLStaticContext::opengl32.glGetString },
+        { "glGetTexParameterfv", (void *) QOpenGLStaticContext::opengl32.glGetTexParameterfv },
+        { "glGetTexParameteriv", (void *) QOpenGLStaticContext::opengl32.glGetTexParameteriv },
+        { "glHint", (void *) QOpenGLStaticContext::opengl32.glHint },
+        { "glIsEnabled", (void *) QOpenGLStaticContext::opengl32.glIsEnabled },
+        { "glIsTexture", (void *) QOpenGLStaticContext::opengl32.glIsTexture },
+        { "glLineWidth", (void *) QOpenGLStaticContext::opengl32.glLineWidth },
+        { "glPixelStorei", (void *) QOpenGLStaticContext::opengl32.glPixelStorei },
+        { "glPolygonOffset", (void *) QOpenGLStaticContext::opengl32.glPolygonOffset },
+        { "glReadPixels", (void *) QOpenGLStaticContext::opengl32.glReadPixels },
+        { "glScissor", (void *) QOpenGLStaticContext::opengl32.glScissor },
+        { "glStencilFunc", (void *) QOpenGLStaticContext::opengl32.glStencilFunc },
+        { "glStencilMask", (void *) QOpenGLStaticContext::opengl32.glStencilMask },
+        { "glStencilOp", (void *) QOpenGLStaticContext::opengl32.glStencilOp },
+        { "glTexImage2D", (void *) QOpenGLStaticContext::opengl32.glTexImage2D },
+        { "glTexParameterf", (void *) QOpenGLStaticContext::opengl32.glTexParameterf },
+        { "glTexParameterfv", (void *) QOpenGLStaticContext::opengl32.glTexParameterfv },
+        { "glTexParameteri", (void *) QOpenGLStaticContext::opengl32.glTexParameteri },
+        { "glTexParameteriv", (void *) QOpenGLStaticContext::opengl32.glTexParameteriv },
+        { "glTexSubImage2D", (void *) QOpenGLStaticContext::opengl32.glTexSubImage2D },
+        { "glViewport", (void *) QOpenGLStaticContext::opengl32.glViewport },
+
+        { "glClearDepth", (void *) QOpenGLStaticContext::opengl32.glClearDepth },
+        { "glDepthRange", (void *) QOpenGLStaticContext::opengl32.glDepthRange },
+    };
+    for (size_t i = 0; i < sizeof(standardFuncs) / sizeof(StdFunc); ++i)
+        if (procName == standardFuncs[i].name)
+            return reinterpret_cast<QFunctionPointer>(standardFuncs[i].func);
+
+    // Even though we use QFunctionPointer, it does not mean the function can be called.
+    // It will need to be cast to the proper function type with the correct calling
+    // convention. QFunctionPointer is nothing more than a glorified void* here.
+    QFunctionPointer procAddress = reinterpret_cast<QFunctionPointer>(QOpenGLStaticContext::opengl32.wglGetProcAddress(procName.constData()));
     if (QWindowsContext::verbose > 1)
-        qCDebug(lcQpaGl) << __FUNCTION__ <<  procName << wglGetCurrentContext() << "returns" << procAddress;
-    if (!procAddress)
+        qCDebug(lcQpaGl) << __FUNCTION__ <<  procName << QOpenGLStaticContext::opengl32.wglGetCurrentContext() << "returns" << procAddress;
+    if (!procAddress && QWindowsContext::verbose)
         qWarning("%s: Unable to resolve '%s'", __FUNCTION__, procName.constData());
     return procAddress;
 }
diff --git a/src/plugins/platforms/windows/qwindowsglcontext.h b/src/plugins/platforms/windows/qwindowsglcontext.h
index c6b477128a..5f845f245e 100644
--- a/src/plugins/platforms/windows/qwindowsglcontext.h
+++ b/src/plugins/platforms/windows/qwindowsglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,10 +36,9 @@
 
 #include "array.h"
 #include "qtwindows_additional.h"
+#include "qwindowsopenglcontext.h"
 
-#include <qpa/qplatformopenglcontext.h>
 #include <QtGui/QOpenGLContext>
-#include <QtCore/QSharedPointer>
 
 QT_BEGIN_NAMESPACE
 
@@ -81,6 +72,8 @@ struct QOpenGLContextData
     HDC hdc;
 };
 
+class QOpenGLStaticContext;
+
 struct QWindowsOpenGLContextFormat
 {
     QWindowsOpenGLContextFormat();
@@ -94,7 +87,87 @@ struct QWindowsOpenGLContextFormat
 
 QDebug operator<<(QDebug d, const QWindowsOpenGLContextFormat &);
 
-class QOpenGLStaticContext
+struct QWindowsOpengl32DLL
+{
+    bool init(bool softwareRendering);
+    void *moduleHandle() const { return m_lib; }
+    bool moduleIsNotOpengl32() const { return m_nonOpengl32; }
+
+    // Wrappers. Always use these instead of SwapBuffers/wglSwapBuffers/etc.
+    BOOL swapBuffers(HDC dc);
+    BOOL setPixelFormat(HDC dc, int pf, const PIXELFORMATDESCRIPTOR *pfd);
+
+    // WGL
+    HGLRC (WINAPI * wglCreateContext)(HDC dc);
+    BOOL (WINAPI * wglDeleteContext)(HGLRC context);
+    HGLRC (WINAPI * wglGetCurrentContext)();
+    HDC (WINAPI * wglGetCurrentDC)();
+    PROC (WINAPI * wglGetProcAddress)(LPCSTR name);
+    BOOL (WINAPI * wglMakeCurrent)(HDC dc, HGLRC context);
+    BOOL (WINAPI * wglShareLists)(HGLRC context1, HGLRC context2);
+
+    // GL1+GLES2 common
+    void (APIENTRY * glBindTexture)(GLenum target, GLuint texture);
+    void (APIENTRY * glBlendFunc)(GLenum sfactor, GLenum dfactor);
+    void (APIENTRY * glClear)(GLbitfield mask);
+    void (APIENTRY * glClearColor)(GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha);
+    void (APIENTRY * glClearStencil)(GLint s);
+    void (APIENTRY * glColorMask)(GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha);
+    void (APIENTRY * glCopyTexImage2D)(GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border);
+    void (APIENTRY * glCopyTexSubImage2D)(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height);
+    void (APIENTRY * glCullFace)(GLenum mode);
+    void (APIENTRY * glDeleteTextures)(GLsizei n, const GLuint* textures);
+    void (APIENTRY * glDepthFunc)(GLenum func);
+    void (APIENTRY * glDepthMask)(GLboolean flag);
+    void (APIENTRY * glDisable)(GLenum cap);
+    void (APIENTRY * glDrawArrays)(GLenum mode, GLint first, GLsizei count);
+    void (APIENTRY * glDrawElements)(GLenum mode, GLsizei count, GLenum type, const GLvoid* indices);
+    void (APIENTRY * glEnable)(GLenum cap);
+    void (APIENTRY * glFinish)();
+    void (APIENTRY * glFlush)();
+    void (APIENTRY * glFrontFace)(GLenum mode);
+    void (APIENTRY * glGenTextures)(GLsizei n, GLuint* textures);
+    void (APIENTRY * glGetBooleanv)(GLenum pname, GLboolean* params);
+    GLenum (APIENTRY * glGetError)();
+    void (APIENTRY * glGetFloatv)(GLenum pname, GLfloat* params);
+    void (APIENTRY * glGetIntegerv)(GLenum pname, GLint* params);
+    const GLubyte * (APIENTRY * glGetString)(GLenum name);
+    void (APIENTRY * glGetTexParameterfv)(GLenum target, GLenum pname, GLfloat* params);
+    void (APIENTRY * glGetTexParameteriv)(GLenum target, GLenum pname, GLint* params);
+    void (APIENTRY * glHint)(GLenum target, GLenum mode);
+    GLboolean (APIENTRY * glIsEnabled)(GLenum cap);
+    GLboolean (APIENTRY * glIsTexture)(GLuint texture);
+    void (APIENTRY * glLineWidth)(GLfloat width);
+    void (APIENTRY * glPixelStorei)(GLenum pname, GLint param);
+    void (APIENTRY * glPolygonOffset)(GLfloat factor, GLfloat units);
+    void (APIENTRY * glReadPixels)(GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLvoid* pixels);
+    void (APIENTRY * glScissor)(GLint x, GLint y, GLsizei width, GLsizei height);
+    void (APIENTRY * glStencilFunc)(GLenum func, GLint ref, GLuint mask);
+    void (APIENTRY * glStencilMask)(GLuint mask);
+    void (APIENTRY * glStencilOp)(GLenum fail, GLenum zfail, GLenum zpass);
+    void (APIENTRY * glTexImage2D)(GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid* pixels);
+    void (APIENTRY * glTexParameterf)(GLenum target, GLenum pname, GLfloat param);
+    void (APIENTRY * glTexParameterfv)(GLenum target, GLenum pname, const GLfloat* params);
+    void (APIENTRY * glTexParameteri)(GLenum target, GLenum pname, GLint param);
+    void (APIENTRY * glTexParameteriv)(GLenum target, GLenum pname, const GLint* params);
+    void (APIENTRY * glTexSubImage2D)(GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid* pixels);
+    void (APIENTRY * glViewport)(GLint x, GLint y, GLsizei width, GLsizei height);
+
+    // GL only
+    void (APIENTRY * glClearDepth)(GLdouble depth);
+    void (APIENTRY * glDepthRange)(GLdouble zNear, GLdouble zFar);
+
+private:
+    void *resolve(const char *name);
+    HMODULE m_lib;
+    bool m_nonOpengl32;
+
+    // For Mesa llvmpipe shipped with a name other than opengl32.dll
+    BOOL (WINAPI * wglSwapBuffers)(HDC dc);
+    BOOL (WINAPI * wglSetPixelFormat)(HDC dc, int pf, const PIXELFORMATDESCRIPTOR *pfd);
+};
+
+class QOpenGLStaticContext : public QWindowsStaticOpenGLContext
 {
     Q_DISABLE_COPY(QOpenGLStaticContext)
     QOpenGLStaticContext();
@@ -125,9 +198,17 @@ public:
     bool hasExtensions() const
         { return wglGetPixelFormatAttribIVARB && wglChoosePixelFormatARB && wglCreateContextAttribsARB; }
 
-    static QOpenGLStaticContext *create();
+    static QOpenGLStaticContext *create(bool softwareRendering = false);
     static QByteArray getGlString(unsigned int which);
 
+    QWindowsOpenGLContext *createContext(QOpenGLContext *context);
+    void *moduleHandle() const { return opengl32.moduleHandle(); }
+    QOpenGLContext::OpenGLModuleType moduleType() const { return QOpenGLContext::LibGL; }
+
+    // For a regular opengl32.dll report the ThreadedOpenGL capability.
+    // For others, which are likely to be software-only, don't.
+    bool supportsThreadedOpenGL() const { return !opengl32.moduleIsNotOpengl32(); }
+
     const QByteArray vendor;
     const QByteArray renderer;
     const QByteArray extensionNames;
@@ -139,37 +220,39 @@ public:
     WglCreateContextAttribsARB wglCreateContextAttribsARB;
     WglSwapInternalExt wglSwapInternalExt;
     WglGetSwapInternalExt wglGetSwapInternalExt;
+
+    static QWindowsOpengl32DLL opengl32;
 };
 
 QDebug operator<<(QDebug d, const QOpenGLStaticContext &);
 
-class QWindowsGLContext : public QPlatformOpenGLContext
+class QWindowsGLContext : public QWindowsOpenGLContext
 {
 public:
-    typedef QSharedPointer<QOpenGLStaticContext> QOpenGLStaticContextPtr;
-
-    explicit QWindowsGLContext(const QOpenGLStaticContextPtr &staticContext,
-                               QOpenGLContext *context);
-    virtual ~QWindowsGLContext();
-    bool isSharing() const                { return m_context->shareHandle(); }
-    bool isValid() const                  { return m_renderingContext; }
-    virtual QSurfaceFormat format() const { return m_obtainedFormat; }
+    explicit QWindowsGLContext(QOpenGLStaticContext *staticContext, QOpenGLContext *context);
+    ~QWindowsGLContext();
+    bool isSharing() const Q_DECL_OVERRIDE { return m_context->shareHandle(); }
+    bool isValid() const Q_DECL_OVERRIDE { return m_renderingContext; }
+    QSurfaceFormat format() const Q_DECL_OVERRIDE { return m_obtainedFormat; }
 
-    virtual void swapBuffers(QPlatformSurface *surface);
+    void swapBuffers(QPlatformSurface *surface) Q_DECL_OVERRIDE;
 
-    virtual bool makeCurrent(QPlatformSurface *surface);
-    virtual void doneCurrent();
+    bool makeCurrent(QPlatformSurface *surface) Q_DECL_OVERRIDE;
+    void doneCurrent() Q_DECL_OVERRIDE;
 
     typedef void (*GL_Proc) ();
 
-    virtual GL_Proc getProcAddress(const QByteArray &procName);
+    QFunctionPointer getProcAddress(const QByteArray &procName) Q_DECL_OVERRIDE;
+
+    HGLRC renderingContext() const { return m_renderingContext; }
 
-    HGLRC renderingContext() const        { return m_renderingContext; }
+    void *nativeContext() const Q_DECL_OVERRIDE { return m_renderingContext; }
 
 private:
     inline void releaseDCs();
+    bool updateObtainedParams(HDC hdc, int *obtainedSwapInterval = 0);
 
-    const QOpenGLStaticContextPtr m_staticContext;
+    QOpenGLStaticContext *m_staticContext;
     QOpenGLContext *m_context;
     QSurfaceFormat m_obtainedFormat;
     HGLRC m_renderingContext;
@@ -178,6 +261,7 @@ private:
     int m_pixelFormat;
     bool m_extensionsUsed;
     int m_swapInterval;
+    bool m_ownsContext;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsguieventdispatcher.cpp b/src/plugins/platforms/windows/qwindowsguieventdispatcher.cpp
index 878db7185d..73988b6db5 100644
--- a/src/plugins/platforms/windows/qwindowsguieventdispatcher.cpp
+++ b/src/plugins/platforms/windows/qwindowsguieventdispatcher.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -115,6 +107,9 @@ messageDebugEntries[] = {
     {WM_SYSCOMMAND, "WM_SYSCOMMAND", true},
     {WM_KEYUP, "WM_KEYUP", true},
     {WM_SYSKEYUP, "WM_SYSKEYUP", true},
+#if defined(WM_APPCOMMAND)
+    {WM_APPCOMMAND, "WM_APPCOMMAND", true},
+#endif
     {WM_IME_CHAR, "WM_IMECHAR", true},
     {WM_IME_KEYDOWN, "WM_IMECHAR", true},
     {WM_CANCELMODE,  "WM_CANCELMODE", true},
diff --git a/src/plugins/platforms/windows/qwindowsguieventdispatcher.h b/src/plugins/platforms/windows/qwindowsguieventdispatcher.h
index 65ef912b43..9554be1f93 100644
--- a/src/plugins/platforms/windows/qwindowsguieventdispatcher.h
+++ b/src/plugins/platforms/windows/qwindowsguieventdispatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,8 +51,8 @@ public:
 
     static const char *windowsMessageName(UINT msg);
 
-    virtual bool QT_ENSURE_STACK_ALIGNED_FOR_SSE processEvents(QEventLoop::ProcessEventsFlags flags);
-    virtual void sendPostedEvents();
+    bool QT_ENSURE_STACK_ALIGNED_FOR_SSE processEvents(QEventLoop::ProcessEventsFlags flags) Q_DECL_OVERRIDE;
+    void sendPostedEvents() Q_DECL_OVERRIDE;
 
 private:
     QEventLoop::ProcessEventsFlags m_flags;
diff --git a/src/plugins/platforms/windows/qwindowsinputcontext.cpp b/src/plugins/platforms/windows/qwindowsinputcontext.cpp
index 2429e8a4fa..929c6165d2 100644
--- a/src/plugins/platforms/windows/qwindowsinputcontext.cpp
+++ b/src/plugins/platforms/windows/qwindowsinputcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 #include "qwindowswindow.h"
 #include "qwindowsintegration.h"
 #include "qwindowsmousehandler.h"
+#include "qwindowsscaling.h"
 
 #include <QtCore/QDebug>
 #include <QtCore/QObject>
@@ -83,23 +76,15 @@ static inline QByteArray debugComposition(int lParam)
 // Cancel current IME composition.
 static inline void imeNotifyCancelComposition(HWND hwnd)
 {
+    if (!hwnd) {
+        qWarning() << __FUNCTION__ << "called with" << hwnd;
+        return;
+    }
     const HIMC himc = ImmGetContext(hwnd);
     ImmNotifyIME(himc, NI_COMPOSITIONSTR, CPS_CANCEL, 0);
     ImmReleaseContext(hwnd, himc);
 }
 
-// Query a QObject for an InputMethod-related value
-// by sending a QInputMethodQueryEvent.
-template <class T>
-    bool inputMethodQuery(QObject *fo, Qt::InputMethodQuery query, T *result)
-{
-    QInputMethodQueryEvent queryEvent(query);
-    if (!QCoreApplication::sendEvent(fo, &queryEvent))
-        return false;
-    *result = qvariant_cast<T>(queryEvent.value(query));
-    return true;
-}
-
 /*!
     \class QWindowsInputContext
     \brief Windows Input context implementation
@@ -170,7 +155,7 @@ QWindowsInputContext::QWindowsInputContext() :
     m_WM_MSIME_MOUSE(RegisterWindowMessage(L"MSIMEMouseOperation")),
     m_endCompositionRecursionGuard(false)
 {
-    connect(qApp->inputMethod(), SIGNAL(cursorRectangleChanged()),
+    connect(QGuiApplication::inputMethod(), SIGNAL(cursorRectangleChanged()),
             this, SLOT(cursorRectChanged()));
 }
 
@@ -187,21 +172,27 @@ void QWindowsInputContext::reset()
     QPlatformInputContext::reset();
     if (!m_compositionContext.hwnd)
         return;
-    QObject *fo = qApp->focusObject();
-    qCDebug(lcQpaInputMethods) << __FUNCTION__<< fo;
-    if (!fo)
-        return;
-    if (m_compositionContext.isComposing) {
+    qCDebug(lcQpaInputMethods) << __FUNCTION__;
+    if (m_compositionContext.isComposing && m_compositionContext.focusObject.isNull()) {
         QInputMethodEvent event;
         if (!m_compositionContext.composition.isEmpty())
             event.setCommitString(m_compositionContext.composition);
-        QCoreApplication::sendEvent(fo, &event);
+        QCoreApplication::sendEvent(m_compositionContext.focusObject, &event);
         endContextComposition();
     }
     imeNotifyCancelComposition(m_compositionContext.hwnd);
     doneContext();
 }
 
+void QWindowsInputContext::setFocusObject(QObject *)
+{
+    // ### fixme: On Windows 8.1, it has been observed that the Input context
+    // remains active when this happens resulting in a lock-up. Consecutive
+    // key events still have VK_PROCESSKEY set and are thus ignored.
+    if (m_compositionContext.isComposing)
+        imeNotifyCancelComposition(m_compositionContext.hwnd);
+}
+
 /*!
     \brief Moves the candidate window along with microfocus of the focus object.
 */
@@ -215,10 +206,11 @@ void QWindowsInputContext::cursorRectChanged()
 {
     if (!m_compositionContext.hwnd)
         return;
-    const QInputMethod *inputMethod = qApp->inputMethod();
-    QRect cursorRectangle = inputMethod->cursorRectangle().toRect();
-    if (!cursorRectangle.isValid())
+    const QInputMethod *inputMethod = QGuiApplication::inputMethod();
+    const QRect cursorRectangleDip = inputMethod->cursorRectangle().toRect();
+    if (!cursorRectangleDip.isValid())
         return;
+    const QRect cursorRectangle = QWindowsScaling::mapToNative(cursorRectangleDip);
 
     qCDebug(lcQpaInputMethods) << __FUNCTION__<< cursorRectangle;
 
@@ -329,7 +321,7 @@ static inline QTextFormat standardFormat(StandardFormat format)
 
 bool QWindowsInputContext::startComposition(HWND hwnd)
 {
-    const QObject *fo = qApp->focusObject();
+    QObject *fo = QGuiApplication::focusObject();
     if (!fo)
         return false;
     // This should always match the object.
@@ -339,7 +331,7 @@ bool QWindowsInputContext::startComposition(HWND hwnd)
     qCDebug(lcQpaInputMethods) << __FUNCTION__ << fo << window;
     if (!fo || QWindowsWindow::handleOf(window) != hwnd)
         return false;
-    initContext(hwnd);
+    initContext(hwnd, fo);
     startContextComposition();
     return true;
 }
@@ -353,6 +345,7 @@ void QWindowsInputContext::startContextComposition()
     m_compositionContext.isComposing = true;
     m_compositionContext.composition.clear();
     m_compositionContext.position = 0;
+    cursorRectChanged(); // position cursor initially.
     update(Qt::ImQueryAll);
 }
 
@@ -396,11 +389,10 @@ static inline QList<QInputMethodEvent::Attribute>
 
 bool QWindowsInputContext::composition(HWND hwnd, LPARAM lParamIn)
 {
-    QObject *fo = qApp->focusObject();
     const int lParam = int(lParamIn);
-    qCDebug(lcQpaInputMethods) << '>' << __FUNCTION__ << fo << debugComposition(lParam)
-        << " composing=" << m_compositionContext.isComposing;
-    if (!fo || m_compositionContext.hwnd != hwnd || !lParam)
+    qCDebug(lcQpaInputMethods) << '>' << __FUNCTION__ << m_compositionContext.focusObject
+        << debugComposition(lParam) << " composing=" << m_compositionContext.isComposing;
+    if (m_compositionContext.focusObject.isNull() || m_compositionContext.hwnd != hwnd || !lParam)
         return false;
     const HIMC himc = ImmGetContext(m_compositionContext.hwnd);
     if (!himc)
@@ -437,10 +429,10 @@ bool QWindowsInputContext::composition(HWND hwnd, LPARAM lParamIn)
         event->setCommitString(getCompositionString(himc, GCS_RESULTSTR));
         endContextComposition();
     }
-    const bool result = QCoreApplication::sendEvent(fo, event.data());
+    const bool result = QCoreApplication::sendEvent(m_compositionContext.focusObject, event.data());
     qCDebug(lcQpaInputMethods) << '<' << __FUNCTION__ << "sending markup="
         << event->attributes().size() << " commit=" << event->commitString()
-        << " to " << fo << " returns " << result;
+        << " to " << m_compositionContext.focusObject << " returns " << result;
     update(Qt::ImQueryAll);
     ImmReleaseContext(m_compositionContext.hwnd, himc);
     return result;
@@ -454,8 +446,7 @@ bool QWindowsInputContext::endComposition(HWND hwnd)
     // against that.
     if (m_endCompositionRecursionGuard || m_compositionContext.hwnd != hwnd)
         return false;
-    QObject *fo = qApp->focusObject();
-    if (!fo)
+    if (m_compositionContext.focusObject.isNull())
         return false;
 
     m_endCompositionRecursionGuard = true;
@@ -463,7 +454,7 @@ bool QWindowsInputContext::endComposition(HWND hwnd)
     imeNotifyCancelComposition(m_compositionContext.hwnd);
     if (m_compositionContext.isComposing) {
         QInputMethodEvent event;
-        QCoreApplication::sendEvent(fo, &event);
+        QCoreApplication::sendEvent(m_compositionContext.focusObject, &event);
     }
     doneContext();
 
@@ -471,11 +462,12 @@ bool QWindowsInputContext::endComposition(HWND hwnd)
     return true;
 }
 
-void QWindowsInputContext::initContext(HWND hwnd)
+void QWindowsInputContext::initContext(HWND hwnd, QObject *focusObject)
 {
     if (m_compositionContext.hwnd)
         doneContext();
     m_compositionContext.hwnd = hwnd;
+    m_compositionContext.focusObject = focusObject;
     // Create a hidden caret which is kept at the microfocus
     // position in update(). This is important for some
     // Chinese input methods.
@@ -496,6 +488,7 @@ void QWindowsInputContext::doneContext()
     m_compositionContext.composition.clear();
     m_compositionContext.position = 0;
     m_compositionContext.isComposing = m_compositionContext.haveCaret = false;
+    m_compositionContext.focusObject = 0;
 }
 
 bool QWindowsInputContext::handleIME_Request(WPARAM wParam,
@@ -536,9 +529,10 @@ int QWindowsInputContext::reconvertString(RECONVERTSTRING *reconv)
     if (!fo)
         return false;
 
-    QString surroundingText;
-    if (!inputMethodQuery(fo, Qt::ImSurroundingText, &surroundingText))
+    const QVariant surroundingTextV = QInputMethod::queryFocusObject(Qt::ImSurroundingText, QVariant());
+    if (!surroundingTextV.isValid())
         return -1;
+    const QString surroundingText = surroundingTextV.toString();
     const DWORD memSize = sizeof(RECONVERTSTRING)
             + (surroundingText.length() + 1) * sizeof(ushort);
     qCDebug(lcQpaInputMethods) << __FUNCTION__ << " reconv=" << reconv
@@ -547,8 +541,8 @@ int QWindowsInputContext::reconvertString(RECONVERTSTRING *reconv)
     if (!reconv)
         return surroundingText.isEmpty() ? -1 : int(memSize);
 
-    int pos = 0;
-    inputMethodQuery(fo, Qt::ImCursorPosition, &pos);
+    const QVariant posV = QInputMethod::queryFocusObject(Qt::ImCursorPosition, QVariant());
+    const int pos = posV.isValid() ? posV.toInt() : 0;
     // Find the word in the surrounding text.
     QTextBoundaryFinder bounds(QTextBoundaryFinder::Word, surroundingText);
     bounds.setPosition(pos);
diff --git a/src/plugins/platforms/windows/qwindowsinputcontext.h b/src/plugins/platforms/windows/qwindowsinputcontext.h
index 31a076cbf8..db1c005207 100644
--- a/src/plugins/platforms/windows/qwindowsinputcontext.h
+++ b/src/plugins/platforms/windows/qwindowsinputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 
 #include "qtwindows_additional.h"
 
+#include <QtCore/QPointer>
 #include <qpa/qplatforminputcontext.h>
 
 QT_BEGIN_NAMESPACE
@@ -63,14 +56,16 @@ class QWindowsInputContext : public QPlatformInputContext
         QString composition;
         int position;
         bool isComposing;
+        QPointer<QObject> focusObject;
     };
 public:
     explicit QWindowsInputContext();
     ~QWindowsInputContext();
 
-    virtual void reset();
-    virtual void update(Qt::InputMethodQueries);
-    virtual void invokeAction(QInputMethod::Action, int cursorPosition);
+    void reset() Q_DECL_OVERRIDE;
+    void update(Qt::InputMethodQueries) Q_DECL_OVERRIDE;
+    void invokeAction(QInputMethod::Action, int cursorPosition) Q_DECL_OVERRIDE;
+    void setFocusObject(QObject *object) Q_DECL_OVERRIDE;
 
     static QWindowsInputContext *instance();
 
@@ -86,7 +81,7 @@ private slots:
     void cursorRectChanged();
 
 private:
-    void initContext(HWND hwnd);
+    void initContext(HWND hwnd, QObject *focusObject);
     void doneContext();
     void startContextComposition();
     void endContextComposition();
diff --git a/src/plugins/platforms/windows/qwindowsintegration.cpp b/src/plugins/platforms/windows/qwindowsintegration.cpp
index 78bf833526..84b71925e1 100644
--- a/src/plugins/platforms/windows/qwindowsintegration.cpp
+++ b/src/plugins/platforms/windows/qwindowsintegration.cpp
@@ -1,61 +1,42 @@
 /****************************************************************************
 **
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qwindowsintegration.h"
+#include "qwindowsscaling.h"
 #include "qwindowswindow.h"
 #include "qwindowscontext.h"
-
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-#  include "qwindowseglcontext.h"
-#  include <QtGui/QOpenGLContext>
-#endif
-
-#if !defined(QT_NO_OPENGL) && !defined(QT_OPENGL_ES_2)
-#  include "qwindowsglcontext.h"
-#endif
-
-#if !defined(QT_NO_OPENGL)
-#  include <QtGui/QOpenGLFunctions>
-#endif
+#include "qwindowsopenglcontext.h"
 
 #include "qwindowsscreen.h"
 #include "qwindowstheme.h"
@@ -89,6 +70,19 @@
 #include <QtCore/QDebug>
 #include <QtCore/QVariant>
 
+#include <limits.h>
+
+#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
+#  include "qwindowseglcontext.h"
+#endif
+#if !defined(QT_NO_OPENGL) && !defined(QT_OPENGL_ES_2)
+#  include "qwindowsglcontext.h"
+#endif
+
+#ifndef Q_OS_WINCE
+#  include "qwindowsopengltester.h"
+#endif
+
 QT_BEGIN_NAMESPACE
 
 /*!
@@ -134,15 +128,9 @@ QT_BEGIN_NAMESPACE
 
 struct QWindowsIntegrationPrivate
 {
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    typedef QSharedPointer<QWindowsEGLStaticContext> QEGLStaticContextPtr;
-#endif
-#if !defined(QT_NO_OPENGL) && !defined(QT_OPENGL_ES_2)
-    typedef QSharedPointer<QOpenGLStaticContext> QOpenGLStaticContextPtr;
-#endif
-
     explicit QWindowsIntegrationPrivate(const QStringList &paramList);
     ~QWindowsIntegrationPrivate();
+    bool ensureStaticOpenGLContext();
 
     unsigned m_options;
     QWindowsContext m_context;
@@ -153,12 +141,9 @@ struct QWindowsIntegrationPrivate
     QWindowsDrag m_drag;
 #  endif
 #endif
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    QEGLStaticContextPtr m_staticEGLContext;
-#endif
-#if !defined(QT_NO_OPENGL) && !defined(QT_OPENGL_ES_2)
-    QOpenGLStaticContextPtr m_staticOpenGLContext;
-#endif
+#ifndef QT_NO_OPENGL
+    QSharedPointer<QWindowsStaticOpenGLContext> m_staticOpenGLContext;
+#endif // QT_NO_OPENGL
     QScopedPointer<QPlatformInputContext> m_inputContext;
 #ifndef QT_NO_ACCESSIBILITY
     QWindowsAccessibility m_accessibility;
@@ -166,8 +151,32 @@ struct QWindowsIntegrationPrivate
     QWindowsServices m_services;
 };
 
+template <typename IntType>
+bool parseIntOption(const QString &parameter,const QLatin1String &option,
+                    IntType minimumValue, IntType maximumValue, IntType *target)
+{
+    const int valueLength = parameter.size() - option.size() - 1;
+    if (valueLength < 1 || !parameter.startsWith(option) || parameter.at(option.size()) != QLatin1Char('='))
+        return false;
+    bool ok;
+    const QStringRef valueRef = parameter.rightRef(valueLength);
+    const int value = valueRef.toInt(&ok);
+    if (ok) {
+        if (value >= minimumValue && value <= maximumValue)
+            *target = static_cast<IntType>(value);
+        else {
+            qWarning() << "Value" << value << "for option" << option << "out of range"
+                << minimumValue << ".." << maximumValue;
+        }
+    } else {
+        qWarning() << "Invalid value" << valueRef << "for option" << option;
+    }
+    return true;
+}
+
 static inline unsigned parseOptions(const QStringList &paramList,
-                                    int *tabletAbsoluteRange)
+                                    int *tabletAbsoluteRange,
+                                    QtWindows::ProcessDpiAwareness *dpiAwareness)
 {
     unsigned options = 0;
     foreach (const QString &param, paramList) {
@@ -187,10 +196,11 @@ static inline unsigned parseOptions(const QStringList &paramList,
             options |= QWindowsIntegration::DisableArb;
         } else if (param == QLatin1String("nomousefromtouch")) {
             options |= QWindowsIntegration::DontPassOsMouseEventsSynthesizedFromTouch;
-        } else if (param.startsWith(QLatin1String("verbose="))) {
-            QWindowsContext::verbose = param.right(param.size() - 8).toInt();
-        } else if (param.startsWith(QLatin1String("tabletabsoluterange="))) {
-            *tabletAbsoluteRange = param.rightRef(param.size() - 20).toInt();
+        } else if (parseIntOption(param, QLatin1String("verbose"), 0, INT_MAX, &QWindowsContext::verbose)
+            || parseIntOption(param, QLatin1String("tabletabsoluterange"), 0, INT_MAX, tabletAbsoluteRange)
+            || parseIntOption(param, QLatin1String("dpiawareness"), QtWindows::ProcessDpiUnaware, QtWindows::ProcessPerMonitorDpiAware, dpiAwareness)) {
+        } else {
+            qWarning() << "Unknown option" << param;
         }
     }
     return options;
@@ -200,10 +210,24 @@ QWindowsIntegrationPrivate::QWindowsIntegrationPrivate(const QStringList &paramL
     : m_options(0)
     , m_fontDatabase(0)
 {
+    static bool dpiAwarenessSet = false;
     int tabletAbsoluteRange = -1;
-    m_options = parseOptions(paramList, &tabletAbsoluteRange);
+    // Default to per-monitor awareness to avoid being scaled when monitors with different DPI
+    // are connected to Windows 8.1
+    QtWindows::ProcessDpiAwareness dpiAwareness = QtWindows::ProcessPerMonitorDpiAware;
+    m_options = parseOptions(paramList, &tabletAbsoluteRange, &dpiAwareness);
     if (tabletAbsoluteRange >= 0)
         m_context.setTabletAbsoluteRange(tabletAbsoluteRange);
+    if (!dpiAwarenessSet) { // Set only once in case of repeated instantiations of QGuiApplication.
+        m_context.setProcessDpiAwareness(dpiAwareness);
+        dpiAwarenessSet = true;
+    }
+    // Determine suitable scale factor, don't mix Windows and Qt scaling
+    if (dpiAwareness != QtWindows::ProcessDpiUnaware)
+        QWindowsScaling::setFactor(QWindowsScaling::determineUiScaleFactor());
+    qCDebug(lcQpaWindows)
+        << __FUNCTION__ << "DpiAwareness=" << dpiAwareness <<",Scaling="
+        << QWindowsScaling::factor();
 }
 
 QWindowsIntegrationPrivate::~QWindowsIntegrationPrivate()
@@ -242,12 +266,7 @@ bool QWindowsIntegration::hasCapability(QPlatformIntegration::Capability cap) co
     case OpenGL:
         return true;
     case ThreadedOpenGL:
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-        return QOpenGLContext::openGLModuleType() != QOpenGLContext::LibGL
-            ? QWindowsEGLContext::hasThreadedOpenGLCapability() : true;
-#  else
-        return true;
-#  endif // QT_OPENGL_ES_2
+        return d->ensureStaticOpenGLContext() ? d->m_staticOpenGLContext->supportsThreadedOpenGL() : false;
 #endif // !QT_NO_OPENGL
     case WindowMasks:
         return true;
@@ -257,6 +276,8 @@ bool QWindowsIntegration::hasCapability(QPlatformIntegration::Capability cap) co
         return true;
     case RasterGLSurface:
         return true;
+    case AllGLFunctionsQueryable:
+        return true;
     default:
         return QPlatformIntegration::hasCapability(cap);
     }
@@ -267,14 +288,13 @@ QWindowsWindowData QWindowsIntegration::createWindowData(QWindow *window) const
 {
     QWindowsWindowData requested;
     requested.flags = window->flags();
-    requested.geometry = window->geometry();
+    requested.geometry = QWindowsScaling::mapToNative(window->geometry());
     // Apply custom margins (see  QWindowsWindow::setCustomMargins())).
     const QVariant customMarginsV = window->property("_q_windowsCustomMargins");
     if (customMarginsV.isValid())
         requested.customMargins = qvariant_cast<QMargins>(customMarginsV);
 
-    const QWindowsWindowData obtained
-            = QWindowsWindowData::create(window, requested, window->title());
+    QWindowsWindowData obtained = QWindowsWindowData::create(window, requested, window->title());
     qCDebug(lcQpaWindows).nospace()
         << __FUNCTION__ << '<' << window
         << "\n    Requested: " << requested.geometry << "frame incl.: "
@@ -289,9 +309,14 @@ QWindowsWindowData QWindowsIntegration::createWindowData(QWindow *window) const
             window->setFlags(obtained.flags);
         // Trigger geometry change signals of QWindow.
         if ((obtained.flags & Qt::Desktop) != Qt::Desktop && requested.geometry != obtained.geometry)
-            QWindowSystemInterface::handleGeometryChange(window, obtained.geometry);
+            QWindowSystemInterface::handleGeometryChange(window, QWindowsScaling::mapFromNative(obtained.geometry));
     }
 
+#ifndef QT_NO_OPENGL
+    d->ensureStaticOpenGLContext();
+    obtained.staticOpenGLContext = d->m_staticOpenGLContext;
+#endif // QT_NO_OPENGL
+
     return obtained;
 }
 
@@ -303,32 +328,82 @@ QPlatformWindow *QWindowsIntegration::createPlatformWindow(QWindow *window) cons
 }
 
 #ifndef QT_NO_OPENGL
-QPlatformOpenGLContext
-    *QWindowsIntegration::createPlatformOpenGLContext(QOpenGLContext *context) const
+static QWindowsStaticOpenGLContext *q_staticOpenGLContext = 0;
+
+QWindowsStaticOpenGLContext *QWindowsStaticOpenGLContext::create()
 {
-    qCDebug(lcQpaGl) << __FUNCTION__ << context->format();
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    if (QOpenGLContext::openGLModuleType() != QOpenGLContext::LibGL) {
-        if (d->m_staticEGLContext.isNull()) {
-            QWindowsEGLStaticContext *staticContext = QWindowsEGLStaticContext::create();
-            if (!staticContext)
-                return 0;
-            d->m_staticEGLContext = QSharedPointer<QWindowsEGLStaticContext>(staticContext);
+    QWindowsStaticOpenGLContext *ctx = 0;
+
+#if defined(QT_OPENGL_DYNAMIC)
+    const QByteArray requested = qgetenv("QT_OPENGL"); // angle, desktop, software
+    const bool angleRequested = QCoreApplication::testAttribute(Qt::AA_UseOpenGLES) || requested == QByteArrayLiteral("angle");
+    const bool desktopRequested = QCoreApplication::testAttribute(Qt::AA_UseDesktopOpenGL) || requested == QByteArrayLiteral("desktop");
+    const bool softwareRequested = QCoreApplication::testAttribute(Qt::AA_UseSoftwareOpenGL) || requested == QByteArrayLiteral("software");
+
+    // If ANGLE is requested, use it, don't try anything else.
+    if (angleRequested) {
+        ctx = QWindowsEGLStaticContext::create();
+    } else {
+        // If opengl32.dll seems to be OpenGL 2.x capable, or desktop OpenGL is requested, use it.
+        if (!softwareRequested && (desktopRequested || QWindowsOpenGLTester::testDesktopGL()))
+            ctx = QOpenGLStaticContext::create();
+        // If failed and desktop OpenGL is not explicitly requested, try ANGLE.
+        if (!ctx && !desktopRequested && !softwareRequested)
+            ctx = QWindowsEGLStaticContext::create();
+        // Try software.
+        if (!ctx) {
+            ctx = QOpenGLStaticContext::create(true);
+            // If software was explicitly requested but failed, try the regular one.
+            if (!ctx && softwareRequested && QWindowsOpenGLTester::testDesktopGL()) {
+                qCWarning(lcQpaGl, "Software OpenGL failed. Falling back to system OpenGL.");
+                ctx = QOpenGLStaticContext::create();
+            }
         }
-        return new QWindowsEGLContext(d->m_staticEGLContext, context->format(), context->shareHandle());
     }
+#elif defined(QT_OPENGL_ES_2)
+    ctx = QWindowsEGLStaticContext::create();
+#elif !defined(QT_NO_OPENGL)
+    ctx = QOpenGLStaticContext::create();
 #endif
-#if !defined(QT_OPENGL_ES_2)
-    if (QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGL) {
-        if (d->m_staticOpenGLContext.isNull())
-            d->m_staticOpenGLContext =
-                QSharedPointer<QOpenGLStaticContext>(QOpenGLStaticContext::create());
-        QScopedPointer<QWindowsGLContext> result(new QWindowsGLContext(d->m_staticOpenGLContext, context));
-        return result->isValid() ? result.take() : 0;
+
+    q_staticOpenGLContext = ctx;
+
+    return ctx;
+}
+
+bool QWindowsIntegrationPrivate::ensureStaticOpenGLContext()
+{
+    if (m_staticOpenGLContext.isNull())
+        m_staticOpenGLContext = QSharedPointer<QWindowsStaticOpenGLContext>(QWindowsStaticOpenGLContext::create());
+    return !m_staticOpenGLContext.isNull();
+}
+
+QPlatformOpenGLContext *QWindowsIntegration::createPlatformOpenGLContext(QOpenGLContext *context) const
+{
+    qCDebug(lcQpaGl) << __FUNCTION__ << context->format();
+    if (d->ensureStaticOpenGLContext()) {
+        QScopedPointer<QWindowsOpenGLContext> result(d->m_staticOpenGLContext->createContext(context));
+        if (result->isValid())
+            return result.take();
     }
-#endif // !QT_OPENGL_ES_2
     return 0;
 }
+
+QOpenGLContext::OpenGLModuleType QWindowsIntegration::openGLModuleType()
+{
+#if defined(QT_OPENGL_ES_2)
+    return QOpenGLContext::LibGLES;
+#elif !defined(QT_OPENGL_DYNAMIC)
+    return QOpenGLContext::LibGL;
+#else
+    return d->ensureStaticOpenGLContext() ? d->m_staticOpenGLContext->moduleType() : QOpenGLContext::LibGL;
+#endif
+}
+
+QWindowsStaticOpenGLContext *QWindowsIntegration::staticOpenGLContext()
+{
+    return q_staticOpenGLContext;
+}
 #endif // !QT_NO_OPENGL
 
 /* Workaround for QTBUG-24205: In 'Auto', pick the FreeType engine for
diff --git a/src/plugins/platforms/windows/qwindowsintegration.h b/src/plugins/platforms/windows/qwindowsintegration.h
index 0f417c8239..d1617eaa3c 100644
--- a/src/plugins/platforms/windows/qwindowsintegration.h
+++ b/src/plugins/platforms/windows/qwindowsintegration.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,6 +44,7 @@ QT_BEGIN_NAMESPACE
 struct QWindowsIntegrationPrivate;
 struct QWindowsWindowData;
 class QWindowsWindow;
+class QWindowsStaticOpenGLContext;
 
 class QWindowsIntegration : public QPlatformIntegration
 {
@@ -73,28 +66,30 @@ public:
     QWindowsWindowData createWindowData(QWindow *window) const;
     QPlatformWindow *createPlatformWindow(QWindow *window) const;
 #ifndef QT_NO_OPENGL
-    virtual QPlatformOpenGLContext *createPlatformOpenGLContext(QOpenGLContext *context) const;
+    QPlatformOpenGLContext *createPlatformOpenGLContext(QOpenGLContext *context) const Q_DECL_OVERRIDE;
+    QOpenGLContext::OpenGLModuleType openGLModuleType();
+    static QWindowsStaticOpenGLContext *staticOpenGLContext();
 #endif
-    virtual QAbstractEventDispatcher *createEventDispatcher() const;
+    QAbstractEventDispatcher *createEventDispatcher() const Q_DECL_OVERRIDE;
     void initialize() Q_DECL_OVERRIDE;
 #ifndef QT_NO_CLIPBOARD
-    virtual QPlatformClipboard *clipboard() const;
+    QPlatformClipboard *clipboard() const Q_DECL_OVERRIDE;
 #  ifndef QT_NO_DRAGANDDROP
-    virtual QPlatformDrag *drag() const;
+    QPlatformDrag *drag() const Q_DECL_OVERRIDE;
 #  endif
 #endif // !QT_NO_CLIPBOARD
-    virtual QPlatformInputContext *inputContext() const;
+    QPlatformInputContext *inputContext() const Q_DECL_OVERRIDE;
 #ifndef QT_NO_ACCESSIBILITY
-    virtual QPlatformAccessibility *accessibility() const;
+    QPlatformAccessibility *accessibility() const Q_DECL_OVERRIDE;
 #endif
-    virtual QPlatformFontDatabase *fontDatabase() const;
-    virtual QStringList themeNames() const;
-    virtual QPlatformTheme *createPlatformTheme(const QString &name) const;
+    QPlatformFontDatabase *fontDatabase() const Q_DECL_OVERRIDE;
+    QStringList themeNames() const Q_DECL_OVERRIDE;
+    QPlatformTheme *createPlatformTheme(const QString &name) const Q_DECL_OVERRIDE;
     QPlatformServices *services() const;
-    virtual QVariant styleHint(StyleHint hint) const;
+    QVariant styleHint(StyleHint hint) const Q_DECL_OVERRIDE;
 
-    virtual Qt::KeyboardModifiers queryKeyboardModifiers() const;
-    virtual QList<int> possibleKeys(const QKeyEvent *e) const;
+    Qt::KeyboardModifiers queryKeyboardModifiers() const Q_DECL_OVERRIDE;
+    QList<int> possibleKeys(const QKeyEvent *e) const Q_DECL_OVERRIDE;
 
     static QWindowsIntegration *instance();
 
@@ -103,7 +98,7 @@ public:
     unsigned options() const;
 
 #if !defined(Q_OS_WINCE) && !defined(QT_NO_SESSIONMANAGER)
-    virtual QPlatformSessionManager *createPlatformSessionManager(const QString &id, const QString &key) const;
+    QPlatformSessionManager *createPlatformSessionManager(const QString &id, const QString &key) const Q_DECL_OVERRIDE;
 #endif
 
 private:
diff --git a/src/plugins/platforms/windows/qwindowsinternalmimedata.cpp b/src/plugins/platforms/windows/qwindowsinternalmimedata.cpp
index 75686182cf..cd01daae4d 100644
--- a/src/plugins/platforms/windows/qwindowsinternalmimedata.cpp
+++ b/src/plugins/platforms/windows/qwindowsinternalmimedata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsinternalmimedata.h b/src/plugins/platforms/windows/qwindowsinternalmimedata.h
index 0c12c662c4..f5004df255 100644
--- a/src/plugins/platforms/windows/qwindowsinternalmimedata.h
+++ b/src/plugins/platforms/windows/qwindowsinternalmimedata.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,9 +46,9 @@ class QDebug;
 // Implementation in qwindowsclipboard.cpp.
 class QWindowsInternalMimeData : public QInternalMimeData {
 public:
-    virtual bool hasFormat_sys(const QString &mimetype) const;
-    virtual QStringList formats_sys() const;
-    virtual QVariant retrieveData_sys(const QString &mimetype, QVariant::Type preferredType) const;
+    bool hasFormat_sys(const QString &mimetype) const Q_DECL_OVERRIDE;
+    QStringList formats_sys() const Q_DECL_OVERRIDE;
+    QVariant retrieveData_sys(const QString &mimetype, QVariant::Type preferredType) const Q_DECL_OVERRIDE;
 
 protected:
     virtual IDataObject *retrieveDataObject() const = 0;
diff --git a/src/plugins/platforms/windows/qwindowskeymapper.cpp b/src/plugins/platforms/windows/qwindowskeymapper.cpp
index 6bcfe01a18..990dbaeba2 100644
--- a/src/plugins/platforms/windows/qwindowskeymapper.cpp
+++ b/src/plugins/platforms/windows/qwindowskeymapper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,7 @@
 #include "qwindowscontext.h"
 #include "qwindowswindow.h"
 #include "qwindowsguieventdispatcher.h"
+#include "qwindowsscaling.h"
 
 #include <QtGui/QWindow>
 #include <qpa/qwindowsysteminterface.h>
@@ -428,6 +421,63 @@ static const uint KeyTbl[] = { // Keyboard mapping table
     0
 };
 
+static const uint CmdTbl[] = { // Multimedia keys mapping table
+                            // Dec |  Hex | AppCommand
+    Qt::Key_unknown,        //   0   0x00
+    Qt::Key_Back,           //   1   0x01   APPCOMMAND_BROWSER_BACKWARD
+    Qt::Key_Forward,        //   2   0x02   APPCOMMAND_BROWSER_FORWARD
+    Qt::Key_Refresh,        //   3   0x03   APPCOMMAND_BROWSER_REFRESH
+    Qt::Key_Stop,           //   4   0x04   APPCOMMAND_BROWSER_STOP
+    Qt::Key_Search,         //   5   0x05   APPCOMMAND_BROWSER_SEARCH
+    Qt::Key_Favorites,      //   6   0x06   APPCOMMAND_BROWSER_FAVORITES
+    Qt::Key_Home,           //   7   0x07   APPCOMMAND_BROWSER_HOME
+    Qt::Key_VolumeMute,     //   8   0x08   APPCOMMAND_VOLUME_MUTE
+    Qt::Key_VolumeDown,     //   9   0x09   APPCOMMAND_VOLUME_DOWN
+    Qt::Key_VolumeUp,       //  10   0x0a   APPCOMMAND_VOLUME_UP
+    Qt::Key_MediaNext,      //  11   0x0b   APPCOMMAND_MEDIA_NEXTTRACK
+    Qt::Key_MediaPrevious,  //  12   0x0c   APPCOMMAND_MEDIA_PREVIOUSTRACK
+    Qt::Key_MediaStop,      //  13   0x0d   APPCOMMAND_MEDIA_STOP
+    Qt::Key_MediaTogglePlayPause,   //  14   0x0e   APPCOMMAND_MEDIA_PLAYPAUSE
+    Qt::Key_LaunchMail,     //  15   0x0f   APPCOMMAND_LAUNCH_MAIL
+    Qt::Key_LaunchMedia,    //  16   0x10   APPCOMMAND_LAUNCH_MEDIA_SELECT
+    Qt::Key_Launch0,        //  17   0x11   APPCOMMAND_LAUNCH_APP1
+    Qt::Key_Launch1,        //  18   0x12   APPCOMMAND_LAUNCH_APP2
+    Qt::Key_BassDown,       //  19   0x13   APPCOMMAND_BASS_DOWN
+    Qt::Key_BassBoost,      //  20   0x14   APPCOMMAND_BASS_BOOST
+    Qt::Key_BassUp,         //  21   0x15   APPCOMMAND_BASS_UP
+    Qt::Key_TrebleDown,     //  22   0x16   APPCOMMAND_TREBLE_DOWN
+    Qt::Key_TrebleUp,       //  23   0x17   APPCOMMAND_TREBLE_UP
+    Qt::Key_MicMute,        //  24   0x18   APPCOMMAND_MICROPHONE_VOLUME_MUTE
+    Qt::Key_MicVolumeDown,  //  25   0x19   APPCOMMAND_MICROPHONE_VOLUME_DOWN
+    Qt::Key_MicVolumeUp,    //  26   0x1a   APPCOMMAND_MICROPHONE_VOLUME_UP
+    Qt::Key_Help,           //  27   0x1b   APPCOMMAND_HELP
+    Qt::Key_Find,           //  28   0x1c   APPCOMMAND_FIND
+    Qt::Key_New,            //  29   0x1d   APPCOMMAND_NEW
+    Qt::Key_Open,           //  30   0x1e   APPCOMMAND_OPEN
+    Qt::Key_Close,          //  31   0x1f   APPCOMMAND_CLOSE
+    Qt::Key_Save,           //  32   0x20   APPCOMMAND_SAVE
+    Qt::Key_Print,          //  33   0x21   APPCOMMAND_PRINT
+    Qt::Key_Undo,           //  34   0x22   APPCOMMAND_UNDO
+    Qt::Key_Redo,           //  35   0x23   APPCOMMAND_REDO
+    Qt::Key_Copy,           //  36   0x24   APPCOMMAND_COPY
+    Qt::Key_Cut,            //  37   0x25   APPCOMMAND_CUT
+    Qt::Key_Paste,          //  38   0x26   APPCOMMAND_PASTE
+    Qt::Key_Reply,          //  39   0x27   APPCOMMAND_REPLY_TO_MAIL
+    Qt::Key_MailForward,    //  40   0x28   APPCOMMAND_FORWARD_MAIL
+    Qt::Key_Send,           //  41   0x29   APPCOMMAND_SEND_MAIL
+    Qt::Key_Spell,          //  42   0x2a   APPCOMMAND_SPELL_CHECK
+    Qt::Key_unknown,        //  43   0x2b   APPCOMMAND_DICTATE_OR_COMMAND_CONTROL_TOGGLE
+    Qt::Key_unknown,        //  44   0x2c   APPCOMMAND_MIC_ON_OFF_TOGGLE
+    Qt::Key_unknown,        //  45   0x2d   APPCOMMAND_CORRECTION_LIST
+    Qt::Key_MediaPlay,      //  46   0x2e   APPCOMMAND_MEDIA_PLAY
+    Qt::Key_MediaPause,     //  47   0x2f   APPCOMMAND_MEDIA_PAUSE
+    Qt::Key_MediaRecord,    //  48   0x30   APPCOMMAND_MEDIA_RECORD
+    Qt::Key_AudioForward,   //  49   0x31   APPCOMMAND_MEDIA_FAST_FORWARD
+    Qt::Key_AudioRewind,    //  50   0x32   APPCOMMAND_MEDIA_REWIND
+    Qt::Key_ChannelDown,    //  51   0x33   APPCOMMAND_MEDIA_CHANNEL_DOWN
+    Qt::Key_ChannelUp       //  52   0x34   APPCOMMAND_MEDIA_CHANNEL_UP
+};
+
 // Possible modifier states.
 // NOTE: The order of these states match the order in QWindowsKeyMapper::updatePossibleKeyCodes()!
 static const Qt::KeyboardModifiers ModsTbl[] = {
@@ -486,15 +536,16 @@ static inline int toKeyOrUnicode(int vk, int scancode, unsigned char *kbdBuffer,
     Q_ASSERT(vk > 0 && vk < 256);
     int code = 0;
     QChar unicodeBuffer[5];
-    int res = ToUnicode(vk, scancode, kbdBuffer, reinterpret_cast<LPWSTR>(unicodeBuffer), 5, 0);
-    // When Ctrl modifier is used ToUnicode does not return correct values. In order to assign the
-    // right key the control modifier is removed for just that function if the previous call failed.
-    if (res == 0 && kbdBuffer[VK_CONTROL]) {
-        const unsigned char controlState = kbdBuffer[VK_CONTROL];
+    // While key combinations containing alt and ctrl might trigger the third assignment of a key
+    // (for example "alt+ctrl+q" causes '@' on a German layout), ToUnicode often does not return the
+    // wanted character if only the ctrl modifier is used. Thus we unset this modifier temporarily
+    // if it is not used together with alt.
+    const unsigned char controlState = kbdBuffer[VK_MENU] ? 0 : kbdBuffer[VK_CONTROL];
+    if (controlState)
         kbdBuffer[VK_CONTROL] = 0;
-        res = ToUnicode(vk, scancode, kbdBuffer, reinterpret_cast<LPWSTR>(unicodeBuffer), 5, 0);
+    int res = ToUnicode(vk, scancode, kbdBuffer, reinterpret_cast<LPWSTR>(unicodeBuffer), 5, 0);
+    if (controlState)
         kbdBuffer[VK_CONTROL] = controlState;
-    }
     if (res)
         code = unicodeBuffer[0].toUpper().unicode();
 
@@ -710,11 +761,10 @@ static void showSystemMenu(QWindow* w)
 #undef enabled
 #undef disabled
 #endif // !Q_OS_WINCE
+    const QPoint topLeft = topLevel->geometry().topLeft() * QWindowsScaling::factor();
     const int ret = TrackPopupMenuEx(menu,
                                TPM_LEFTALIGN  | TPM_TOPALIGN | TPM_NONOTIFY | TPM_RETURNCMD,
-                               topLevel->geometry().x(), topLevel->geometry().y(),
-                               topLevelHwnd,
-                               0);
+                               topLeft.x(), topLeft.y(), topLevelHwnd, 0);
     if (ret)
         qWindowsWndProc(topLevelHwnd, WM_SYSCOMMAND, ret, 0);
 }
@@ -747,6 +797,11 @@ bool QWindowsKeyMapper::translateKeyEvent(QWindow *widget, HWND hwnd,
         return true;
     }
 
+#if defined(WM_APPCOMMAND)
+    if (msg.message == WM_APPCOMMAND)
+        return translateMultimediaKeyEventInternal(widget, msg);
+#endif
+
     // WM_(IME_)CHAR messages already contain the character in question so there is
     // no need to fiddle with our key map. In any other case add this key to the
     // keymap if it is not present yet.
@@ -761,6 +816,29 @@ bool QWindowsKeyMapper::translateKeyEvent(QWindow *widget, HWND hwnd,
     return translateKeyEventInternal(widget, msg, false);
 }
 
+bool QWindowsKeyMapper::translateMultimediaKeyEventInternal(QWindow *window, const MSG &msg)
+{
+#if defined(WM_APPCOMMAND)
+    const int cmd = GET_APPCOMMAND_LPARAM(msg.lParam);
+    const int dwKeys = GET_KEYSTATE_LPARAM(msg.lParam);
+    int state = 0;
+    state |= (dwKeys & MK_SHIFT ? int(Qt::ShiftModifier) : 0);
+    state |= (dwKeys & MK_CONTROL ? int(Qt::ControlModifier) : 0);
+
+    QWindow *receiver = m_keyGrabber ? m_keyGrabber : window;
+
+    if (cmd < 0 || cmd > 52)
+        return false;
+
+    const int qtKey = CmdTbl[cmd];
+    sendExtendedPressRelease(receiver, qtKey, Qt::KeyboardModifier(state), 0, 0, 0);
+    return true;
+#else
+    Q_UNREACHABLE();
+    return false;
+#endif
+}
+
 bool QWindowsKeyMapper::translateKeyEventInternal(QWindow *window, const MSG &msg, bool /* grab */)
 {
     const int  msgType = msg.message;
diff --git a/src/plugins/platforms/windows/qwindowskeymapper.h b/src/plugins/platforms/windows/qwindowskeymapper.h
index f7d33758a0..70ca1d8561 100644
--- a/src/plugins/platforms/windows/qwindowskeymapper.h
+++ b/src/plugins/platforms/windows/qwindowskeymapper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -93,6 +85,7 @@ public:
 
 private:
     bool translateKeyEventInternal(QWindow *receiver, const MSG &msg, bool grab);
+    bool translateMultimediaKeyEventInternal(QWindow *receiver, const MSG &msg);
     void updateKeyMap(const MSG &msg);
 
     bool m_useRTLExtensions;
diff --git a/src/plugins/platforms/windows/qwindowsmime.cpp b/src/plugins/platforms/windows/qwindowsmime.cpp
index 3af2cff9a0..a43e8823aa 100644
--- a/src/plugins/platforms/windows/qwindowsmime.cpp
+++ b/src/plugins/platforms/windows/qwindowsmime.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1035,17 +1027,14 @@ bool QWindowsMimeImage::canConvertToMime(const QString &mimeType, IDataObject *p
 bool QWindowsMimeImage::canConvertFromMime(const FORMATETC &formatetc, const QMimeData *mimeData) const
 {
     int cf = getCf(formatetc);
-    if (mimeData->hasImage()) {
-        if (cf == CF_DIB)
-            return true;
-        else if (cf == CF_DIBV5) {
-            //support DIBV5 conversion only if the image has alpha channel
-            QImage image = qvariant_cast<QImage>(mimeData->imageData());
-            if (!image.isNull() && image.hasAlphaChannel())
-                return true;
-        }
-    }
-    return false;
+    if (!mimeData->hasImage())
+        return false;
+    const QImage image = qvariant_cast<QImage>(mimeData->imageData());
+    if (image.isNull())
+        return false;
+    // QTBUG-11463, deny CF_DIB support for images with alpha to prevent loss of
+    // transparency in conversion.
+    return cf == CF_DIBV5 || (cf == CF_DIB && !image.hasAlphaChannel());
 }
 
 bool QWindowsMimeImage::convertFromMime(const FORMATETC &formatetc, const QMimeData *mimeData, STGMEDIUM * pmedium) const
@@ -1442,13 +1431,13 @@ QString QLastResortMimes::mimeForFormat(const FORMATETC &formatetc) const
     \sa QWindowsMime
 */
 
-QWindowsMimeConverter::QWindowsMimeConverter()
+QWindowsMimeConverter::QWindowsMimeConverter() : m_internalMimeCount(0)
 {
 }
 
 QWindowsMimeConverter::~QWindowsMimeConverter()
 {
-    qDeleteAll(m_mimes);
+    qDeleteAll(m_mimes.begin(), m_mimes.begin() + m_internalMimeCount);
 }
 
 QWindowsMime * QWindowsMimeConverter::converterToMime(const QString &mimeType, IDataObject *pDataObj) const
@@ -1526,6 +1515,7 @@ void QWindowsMimeConverter::ensureInitialized() const
         m_mimes << new QWindowsMimeImage << new QLastResortMimes
                 << new QWindowsMimeText << new QWindowsMimeURI
                 << new QWindowsMimeHtml << new QBuiltInMimes;
+        m_internalMimeCount = m_mimes.size();
     }
 }
 
@@ -1552,4 +1542,10 @@ QVariant QWindowsMimeConverter::convertToMime(const QStringList &mimeTypes,
     return QVariant();
 }
 
+void QWindowsMimeConverter::registerMime(QWindowsMime *mime)
+{
+    ensureInitialized();
+    m_mimes.append(mime);
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsmime.h b/src/plugins/platforms/windows/qwindowsmime.h
index cd0fb4d8b3..21febefe12 100644
--- a/src/plugins/platforms/windows/qwindowsmime.h
+++ b/src/plugins/platforms/windows/qwindowsmime.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -89,12 +81,14 @@ public:
     QVariant convertToMime(const QStringList &mimeTypes, IDataObject *pDataObj, QVariant::Type preferredType,
                            QString *format = 0) const;
 
-private:
-    typedef QSharedPointer<QWindowsMime> MimePtr;
+    void registerMime(QWindowsMime *mime);
+    void unregisterMime(QWindowsMime *mime) { m_mimes.removeOne(mime); }
 
+private:
     void ensureInitialized() const;
 
     mutable QList<QWindowsMime *> m_mimes;
+    mutable int m_internalMimeCount;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsmousehandler.cpp b/src/plugins/platforms/windows/qwindowsmousehandler.cpp
index 4633378342..39321c3460 100644
--- a/src/plugins/platforms/windows/qwindowsmousehandler.cpp
+++ b/src/plugins/platforms/windows/qwindowsmousehandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -191,8 +183,10 @@ bool QWindowsMouseHandler::translateMouseEvent(QWindow *window, HWND hwnd,
         const QPoint globalPosition = winEventPosition;
         const QPoint clientPosition = QWindowsGeometryHint::mapFromGlobal(hwnd, globalPosition);
         const Qt::MouseButtons buttons = QWindowsMouseHandler::queryMouseButtons();
-        QWindowSystemInterface::handleFrameStrutMouseEvent(window, clientPosition,
-                                                           globalPosition, buttons,
+        QWindowSystemInterface::handleFrameStrutMouseEvent(window,
+                                                           clientPosition  / QWindowsScaling::factor(),
+                                                           globalPosition  / QWindowsScaling::factor(),
+                                                           buttons,
                                                            QWindowsKeyMapper::queryKeyboardModifiers(),
                                                            source);
         return false; // Allow further event processing (dragging of windows).
@@ -334,7 +328,10 @@ bool QWindowsMouseHandler::translateMouseEvent(QWindow *window, HWND hwnd,
         m_windowUnderMouse = currentWindowUnderMouse;
     }
 
-    QWindowSystemInterface::handleMouseEvent(window, winEventPosition, globalPosition, buttons,
+    QWindowSystemInterface::handleMouseEvent(window,
+                                             winEventPosition / QWindowsScaling::factor(),
+                                             globalPosition / QWindowsScaling::factor(),
+                                             buttons,
                                              QWindowsKeyMapper::queryKeyboardModifiers(),
                                              source);
     m_previousCaptureWindow = hasCapture ? window : 0;
@@ -379,7 +376,7 @@ bool QWindowsMouseHandler::translateMouseWheelEvent(QWindow *window, HWND,
     // 2) The window receiving the event
     // If a window is blocked by modality, it can't get the event.
     const QPoint globalPos(GET_X_LPARAM(msg.lParam), GET_Y_LPARAM(msg.lParam));
-    QWindow *receiver = QWindowsScreen::windowAt(globalPos);
+    QWindow *receiver = QWindowsScreen::windowAt(globalPos, CWP_SKIPINVISIBLE);
     bool handleEvent = true;
     if (!isValidWheelReceiver(receiver)) {
         receiver = window;
@@ -388,10 +385,11 @@ bool QWindowsMouseHandler::translateMouseWheelEvent(QWindow *window, HWND,
     }
 
     if (handleEvent) {
+        const QPoint posDip = QWindowsGeometryHint::mapFromGlobal(receiver, globalPos) / QWindowsScaling::factor();
         QWindowSystemInterface::handleWheelEvent(receiver,
-                                                 QWindowsGeometryHint::mapFromGlobal(receiver, globalPos),
-                                                 globalPos,
-                                                 delta, orientation, mods);
+                                                 posDip, globalPos / QWindowsScaling::factor(),
+                                                 delta / QWindowsScaling::factor(),
+                                                 orientation, mods);
     }
 
     return true;
@@ -419,6 +417,7 @@ bool QWindowsMouseHandler::translateTouchEvent(QWindow *window, HWND,
     Q_ASSERT(QWindowsContext::user32dll.getTouchInputInfo);
 
     QWindowsContext::user32dll.getTouchInputInfo((HANDLE) msg.lParam, msg.wParam, winTouchInputs.data(), sizeof(TOUCHINPUT));
+    const qreal screenPosFactor = 0.01 / qreal(QWindowsScaling::factor());
     for (int i = 0; i < winTouchPointCount; ++i) {
         const TOUCHINPUT &winTouchInput = winTouchInputs[i];
         int id = m_touchInputIDToTouchPointID.value(winTouchInput.dwID, -1);
@@ -432,10 +431,9 @@ bool QWindowsMouseHandler::translateTouchEvent(QWindow *window, HWND,
         if (m_lastTouchPositions.contains(id))
             touchPoint.normalPosition = m_lastTouchPositions.value(id);
 
-        QPointF screenPos = QPointF(qreal(winTouchInput.x) / qreal(100.), qreal(winTouchInput.y) / qreal(100.));
+        const QPointF screenPos = QPointF(winTouchInput.x, winTouchInput.y) * screenPosFactor;
         if (winTouchInput.dwMask & TOUCHINPUTMASKF_CONTACTAREA)
-            touchPoint.area.setSize(QSizeF(qreal(winTouchInput.cxContact) / qreal(100.),
-                                           qreal(winTouchInput.cyContact) / qreal(100.)));
+            touchPoint.area.setSize(QSizeF(winTouchInput.cxContact, winTouchInput.cyContact) * screenPosFactor);
         touchPoint.area.moveCenter(screenPos);
         QPointF normalPosition = QPointF(screenPos.x() / screenGeometry.width(),
                                          screenPos.y() / screenGeometry.height());
diff --git a/src/plugins/platforms/windows/qwindowsmousehandler.h b/src/plugins/platforms/windows/qwindowsmousehandler.h
index 7a7b92ca7e..967c64e597 100644
--- a/src/plugins/platforms/windows/qwindowsmousehandler.h
+++ b/src/plugins/platforms/windows/qwindowsmousehandler.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsnativeimage.cpp b/src/plugins/platforms/windows/qwindowsnativeimage.cpp
index d6a96aa5aa..ddb36b45df 100644
--- a/src/plugins/platforms/windows/qwindowsnativeimage.cpp
+++ b/src/plugins/platforms/windows/qwindowsnativeimage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsnativeimage.h b/src/plugins/platforms/windows/qwindowsnativeimage.h
index 399bead323..2138a46ff9 100644
--- a/src/plugins/platforms/windows/qwindowsnativeimage.h
+++ b/src/plugins/platforms/windows/qwindowsnativeimage.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,6 +59,8 @@ public:
 
     HDC hdc() const { return m_hdc; }
 
+    void setDevicePixelRatio(qreal scaleFactor) { m_image.setDevicePixelRatio(scaleFactor); }
+
     static QImage::Format systemFormat();
 
 private:
diff --git a/src/plugins/platforms/windows/qwindowsnativeinterface.cpp b/src/plugins/platforms/windows/qwindowsnativeinterface.cpp
index 06c0122bbb..002f4ae92c 100644
--- a/src/plugins/platforms/windows/qwindowsnativeinterface.cpp
+++ b/src/plugins/platforms/windows/qwindowsnativeinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,24 +34,45 @@
 #include "qwindowsnativeinterface.h"
 #include "qwindowswindow.h"
 #include "qwindowscontext.h"
-
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-#  include "qwindowseglcontext.h"
-#  include <QtGui/QOpenGLContext>
-#endif
-
-#if !defined(QT_NO_OPENGL) && !defined(QT_OPENGL_ES_2)
-#  include "qwindowsglcontext.h"
-#endif
-
-#if !defined(QT_NO_OPENGL)
-#  include <QtGui/QOpenGLFunctions>
-#endif
+#include "qwindowsopenglcontext.h"
+#include "qwindowsintegration.h"
+#include "qwindowsmime.h"
 
 #include <QtGui/QWindow>
+#include <QtGui/QOpenGLContext>
 
 QT_BEGIN_NAMESPACE
 
+enum ResourceType {
+    RenderingContextType,
+    EglContextType,
+    EglDisplayType,
+    EglConfigType,
+    HandleType,
+    GlHandleType,
+    GetDCType,
+    ReleaseDCType
+};
+
+static int resourceType(const QByteArray &key)
+{
+    static const char *names[] = { // match ResourceType
+        "renderingcontext",
+        "eglcontext",
+        "egldisplay",
+        "eglconfig",
+        "handle",
+        "glhandle",
+        "getdc",
+        "releasedc"
+    };
+    const char ** const end = names + sizeof(names) / sizeof(names[0]);
+    const char **result = std::find(names, end, key);
+    if (result == end)
+        result = std::find(names, end, key.toLower());
+    return int(result - names);
+}
+
 void *QWindowsNativeInterface::nativeResourceForWindow(const QByteArray &resource, QWindow *window)
 {
     if (!window || !window->handle()) {
@@ -67,14 +80,15 @@ void *QWindowsNativeInterface::nativeResourceForWindow(const QByteArray &resourc
         return 0;
     }
     QWindowsWindow *bw = static_cast<QWindowsWindow *>(window->handle());
-    if (resource == "handle")
+    int type = resourceType(resource);
+    if (type == HandleType)
         return bw->handle();
     switch (window->surfaceType()) {
     case QWindow::RasterSurface:
     case QWindow::RasterGLSurface:
-        if (resource == "getDC")
+        if (type == GetDCType)
             return bw->getDC();
-        if (resource == "releaseDC") {
+        if (type == ReleaseDCType) {
             bw->releaseDC();
             return 0;
         }
@@ -117,6 +131,16 @@ QVariantMap QWindowsNativeInterface::windowProperties(QPlatformWindow *window) c
     return result;
 }
 
+void *QWindowsNativeInterface::nativeResourceForIntegration(const QByteArray &resource)
+{
+#ifndef QT_NO_OPENGL
+    if (resourceType(resource) == GlHandleType)
+        return QWindowsIntegration::staticOpenGLContext()->moduleHandle();
+#endif
+
+    return 0;
+}
+
 #ifndef QT_NO_OPENGL
 void *QWindowsNativeInterface::nativeResourceForContext(const QByteArray &resource, QOpenGLContext *context)
 {
@@ -124,24 +148,19 @@ void *QWindowsNativeInterface::nativeResourceForContext(const QByteArray &resour
         qWarning("%s: '%s' requested for null context or context without handle.", __FUNCTION__, resource.constData());
         return 0;
     }
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    if (QOpenGLContext::openGLModuleType() != QOpenGLContext::LibGL) {
-        QWindowsEGLContext *windowsEglContext = static_cast<QWindowsEGLContext *>(context->handle());
-        if (resource == QByteArrayLiteral("eglDisplay"))
-            return windowsEglContext->eglDisplay();
-        if (resource == QByteArrayLiteral("eglContext"))
-            return windowsEglContext->eglContext();
-        if (resource == QByteArrayLiteral("eglConfig"))
-            return windowsEglContext->eglConfig();
-    }
-#endif // QT_OPENGL_ES_2 || QT_OPENGL_DYNAMIC
-#if !defined(QT_OPENGL_ES_2)
-    if (QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGL) {
-        QWindowsGLContext *windowsContext = static_cast<QWindowsGLContext *>(context->handle());
-        if (resource == QByteArrayLiteral("renderingContext"))
-            return windowsContext->renderingContext();
+
+    QWindowsOpenGLContext *glcontext = static_cast<QWindowsOpenGLContext *>(context->handle());
+    switch (resourceType(resource)) {
+    case RenderingContextType: // Fall through.
+    case EglContextType:
+        return glcontext->nativeContext();
+    case EglDisplayType:
+        return glcontext->nativeDisplay();
+    case EglConfigType:
+        return glcontext->nativeConfig();
+    default:
+        break;
     }
-#endif // QT_OPENGL_ES_2 || QT_OPENGL_DYNAMIC
 
     qWarning("%s: Invalid key '%s' requested.", __FUNCTION__, resource.constData());
     return 0;
@@ -182,4 +201,19 @@ void QWindowsNativeInterface::setAsyncExpose(bool value)
     QWindowsContext::instance()->setAsyncExpose(value);
 }
 
+void QWindowsNativeInterface::registerWindowsMime(void *mimeIn)
+{
+    QWindowsContext::instance()->mimeConverter().registerMime(reinterpret_cast<QWindowsMime *>(mimeIn));
+}
+
+void QWindowsNativeInterface::unregisterWindowsMime(void *mimeIn)
+{
+    QWindowsContext::instance()->mimeConverter().unregisterMime(reinterpret_cast<QWindowsMime *>(mimeIn));
+}
+
+int QWindowsNativeInterface::registerMimeType(const QString &mimeType)
+{
+    return QWindowsMime::registerMimeType(mimeType);
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsnativeinterface.h b/src/plugins/platforms/windows/qwindowsnativeinterface.h
index 20100d0f49..3d47dbe721 100644
--- a/src/plugins/platforms/windows/qwindowsnativeinterface.h
+++ b/src/plugins/platforms/windows/qwindowsnativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,11 +58,13 @@ class QWindowsNativeInterface : public QPlatformNativeInterface
 {
     Q_OBJECT
     Q_PROPERTY(bool asyncExpose READ asyncExpose WRITE setAsyncExpose)
+
 public:
+    void *nativeResourceForIntegration(const QByteArray &resource) Q_DECL_OVERRIDE;
 #ifndef QT_NO_OPENGL
-    virtual void *nativeResourceForContext(const QByteArray &resource, QOpenGLContext *context);
+    void *nativeResourceForContext(const QByteArray &resource, QOpenGLContext *context) Q_DECL_OVERRIDE;
 #endif
-    virtual void *nativeResourceForWindow(const QByteArray &resource, QWindow *window);
+    void *nativeResourceForWindow(const QByteArray &resource, QWindow *window) Q_DECL_OVERRIDE;
 
     Q_INVOKABLE void *createMessageWindow(const QString &classNameTemplate,
                                           const QString &windowName,
@@ -80,13 +74,17 @@ public:
 
     Q_INVOKABLE void beep() { MessageBeep(MB_OK); } // For QApplication
 
+    Q_INVOKABLE void registerWindowsMime(void *mimeIn);
+    Q_INVOKABLE void unregisterWindowsMime(void *mime);
+    Q_INVOKABLE int registerMimeType(const QString &mimeType);
+
     bool asyncExpose() const;
     void setAsyncExpose(bool value);
 
-    QVariantMap windowProperties(QPlatformWindow *window) const;
-    QVariant windowProperty(QPlatformWindow *window, const QString &name) const;
-    QVariant windowProperty(QPlatformWindow *window, const QString &name, const QVariant &defaultValue) const;
-    void setWindowProperty(QPlatformWindow *window, const QString &name, const QVariant &value);
+    QVariantMap windowProperties(QPlatformWindow *window) const Q_DECL_OVERRIDE;
+    QVariant windowProperty(QPlatformWindow *window, const QString &name) const Q_DECL_OVERRIDE;
+    QVariant windowProperty(QPlatformWindow *window, const QString &name, const QVariant &defaultValue) const Q_DECL_OVERRIDE;
+    void setWindowProperty(QPlatformWindow *window, const QString &name, const QVariant &value) Q_DECL_OVERRIDE;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsole.cpp b/src/plugins/platforms/windows/qwindowsole.cpp
index 4f641d781d..15a45fdd4b 100644
--- a/src/plugins/platforms/windows/qwindowsole.cpp
+++ b/src/plugins/platforms/windows/qwindowsole.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsole.h b/src/plugins/platforms/windows/qwindowsole.h
index 4c5c41adb3..6fcfa5dfa0 100644
--- a/src/plugins/platforms/windows/qwindowsole.h
+++ b/src/plugins/platforms/windows/qwindowsole.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsopenglcontext.h b/src/plugins/platforms/windows/qwindowsopenglcontext.h
new file mode 100644
index 0000000000..2f724f3dd7
--- /dev/null
+++ b/src/plugins/platforms/windows/qwindowsopenglcontext.h
@@ -0,0 +1,81 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWINDOWSOPENGLCONTEXT_H
+#define QWINDOWSOPENGLCONTEXT_H
+
+#include <QtGui/QOpenGLContext>
+#include <qpa/qplatformopenglcontext.h>
+
+QT_BEGIN_NAMESPACE
+
+#ifndef QT_NO_OPENGL
+
+class QWindowsOpenGLContext;
+
+class QWindowsStaticOpenGLContext
+{
+public:
+    static QWindowsStaticOpenGLContext *create();
+    virtual ~QWindowsStaticOpenGLContext() { }
+
+    virtual QWindowsOpenGLContext *createContext(QOpenGLContext *context) = 0;
+    virtual void *moduleHandle() const = 0;
+    virtual QOpenGLContext::OpenGLModuleType moduleType() const = 0;
+    virtual bool supportsThreadedOpenGL() const { return false; }
+
+    // If the windowing system interface needs explicitly created window surfaces (like EGL),
+    // reimplement these.
+    virtual void *createWindowSurface(void * /*nativeWindow*/, void * /*nativeConfig*/) { return 0; }
+    virtual void destroyWindowSurface(void * /*nativeSurface*/) { }
+};
+
+class QWindowsOpenGLContext : public QPlatformOpenGLContext
+{
+public:
+    virtual ~QWindowsOpenGLContext() { }
+
+    // Returns the native context handle (e.g. HGLRC for WGL, EGLContext for EGL).
+    virtual void *nativeContext() const = 0;
+
+    // These should be implemented only for some winsys interfaces, for example EGL.
+    // For others, like WGL, they are not relevant.
+    virtual void *nativeDisplay() const { return 0; }
+    virtual void *nativeConfig() const { return 0; }
+};
+
+#endif // QT_NO_OPENGL
+
+QT_END_NAMESPACE
+
+#endif // QWINDOWSOPENGLCONTEXT_H
diff --git a/src/plugins/platforms/windows/qwindowsopengltester.cpp b/src/plugins/platforms/windows/qwindowsopengltester.cpp
new file mode 100644
index 0000000000..ba3a95ce7a
--- /dev/null
+++ b/src/plugins/platforms/windows/qwindowsopengltester.cpp
@@ -0,0 +1,138 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qwindowsopengltester.h"
+#include "qt_windows.h"
+#include "qwindowscontext.h"
+
+QT_BEGIN_NAMESPACE
+
+bool QWindowsOpenGLTester::testDesktopGL()
+{
+    HMODULE lib = 0;
+    HWND wnd = 0;
+    HDC dc = 0;
+    HGLRC context = 0;
+    LPCTSTR className = L"qtopengltest";
+
+    HGLRC (WINAPI * CreateContext)(HDC dc) = 0;
+    BOOL (WINAPI * DeleteContext)(HGLRC context) = 0;
+    BOOL (WINAPI * MakeCurrent)(HDC dc, HGLRC context) = 0;
+    PROC (WINAPI * WGL_GetProcAddress)(LPCSTR name) = 0;
+
+    bool result = false;
+
+    // Test #1: Load opengl32.dll and try to resolve an OpenGL 2 function.
+    // This will typically fail on systems that do not have a real OpenGL driver.
+    lib = LoadLibraryA("opengl32.dll");
+    if (lib) {
+        CreateContext = reinterpret_cast<HGLRC (WINAPI *)(HDC)>(::GetProcAddress(lib, "wglCreateContext"));
+        if (!CreateContext)
+            goto cleanup;
+        DeleteContext = reinterpret_cast<BOOL (WINAPI *)(HGLRC)>(::GetProcAddress(lib, "wglDeleteContext"));
+        if (!DeleteContext)
+            goto cleanup;
+        MakeCurrent = reinterpret_cast<BOOL (WINAPI *)(HDC, HGLRC)>(::GetProcAddress(lib, "wglMakeCurrent"));
+        if (!MakeCurrent)
+            goto cleanup;
+        WGL_GetProcAddress = reinterpret_cast<PROC (WINAPI *)(LPCSTR)>(::GetProcAddress(lib, "wglGetProcAddress"));
+        if (!WGL_GetProcAddress)
+            goto cleanup;
+
+        WNDCLASS wclass;
+        wclass.cbClsExtra = 0;
+        wclass.cbWndExtra = 0;
+        wclass.hInstance = (HINSTANCE) GetModuleHandle(0);
+        wclass.hIcon = 0;
+        wclass.hCursor = 0;
+        wclass.hbrBackground = (HBRUSH) (COLOR_BACKGROUND);
+        wclass.lpszMenuName = 0;
+        wclass.lpfnWndProc = DefWindowProc;
+        wclass.lpszClassName = className;
+        wclass.style = CS_OWNDC;
+        if (!RegisterClass(&wclass))
+            goto cleanup;
+        wnd = CreateWindow(className, L"qtopenglproxytest", WS_OVERLAPPED,
+                           0, 0, 640, 480, 0, 0, wclass.hInstance, 0);
+        if (!wnd)
+            goto cleanup;
+        dc = GetDC(wnd);
+        if (!dc)
+            goto cleanup;
+
+        PIXELFORMATDESCRIPTOR pfd;
+        memset(&pfd, 0, sizeof(PIXELFORMATDESCRIPTOR));
+        pfd.nSize = sizeof(PIXELFORMATDESCRIPTOR);
+        pfd.nVersion = 1;
+        pfd.dwFlags = PFD_SUPPORT_OPENGL | PFD_DRAW_TO_WINDOW | PFD_GENERIC_FORMAT;
+        pfd.iPixelType = PFD_TYPE_RGBA;
+        // Use the GDI functions. Under the hood this will call the wgl variants in opengl32.dll.
+        int pixelFormat = ChoosePixelFormat(dc, &pfd);
+        if (!pixelFormat)
+            goto cleanup;
+        if (!SetPixelFormat(dc, pixelFormat, &pfd))
+            goto cleanup;
+        context = CreateContext(dc);
+        if (!context)
+            goto cleanup;
+        if (!MakeCurrent(dc, context))
+            goto cleanup;
+
+        // Now that there is finally a context current, try doing something useful.
+        if (WGL_GetProcAddress("glCreateShader")) {
+            result = true;
+            qCDebug(lcQpaGl, "OpenGL 2.0 entry points available");
+        } else {
+            qCDebug(lcQpaGl, "OpenGL 2.0 entry points not found");
+        }
+    } else {
+        qCDebug(lcQpaGl, "Failed to load opengl32.dll");
+    }
+
+cleanup:
+    if (MakeCurrent)
+        MakeCurrent(0, 0);
+    if (context)
+        DeleteContext(context);
+    if (dc && wnd)
+        ReleaseDC(wnd, dc);
+    if (wnd) {
+        DestroyWindow(wnd);
+        UnregisterClass(className, GetModuleHandle(0));
+    }
+    // No FreeLibrary. Some implementations, Mesa in particular, deadlock when trying to unload.
+
+    return result;
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsopengltester.h b/src/plugins/platforms/windows/qwindowsopengltester.h
new file mode 100644
index 0000000000..40a8e9d3ac
--- /dev/null
+++ b/src/plugins/platforms/windows/qwindowsopengltester.h
@@ -0,0 +1,44 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <qtwindowsglobal.h>
+
+QT_BEGIN_NAMESPACE
+
+class QWindowsOpenGLTester
+{
+public:
+    static bool testDesktopGL();
+};
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsscaling.cpp b/src/plugins/platforms/windows/qwindowsscaling.cpp
new file mode 100644
index 0000000000..ae1a7d4ded
--- /dev/null
+++ b/src/plugins/platforms/windows/qwindowsscaling.cpp
@@ -0,0 +1,71 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include  "qwindowsscaling.h"
+#include  "qwindowsscreen.h"
+
+#include <QtCore/QDebug>
+#include <QtCore/QCoreApplication>
+
+QT_BEGIN_NAMESPACE
+
+/*!
+    \class QWindowsScaling
+    \brief Windows scaling utilities
+
+    \internal
+    \ingroup qt-lighthouse-win
+*/
+
+int QWindowsScaling::m_factor = 1;
+
+static const char devicePixelRatioEnvVar[] = "QT_DEVICE_PIXEL_RATIO";
+
+// Suggest a scale factor by checking monitor sizes.
+int QWindowsScaling::determineUiScaleFactor()
+{
+    if (!qEnvironmentVariableIsSet(devicePixelRatioEnvVar))
+        return 1;
+    const QByteArray envDevicePixelRatioEnv = qgetenv(devicePixelRatioEnvVar);
+    // Auto: Suggest a scale factor by checking monitor resolution.
+    if (envDevicePixelRatioEnv == QByteArrayLiteral("auto")) {
+        const int maxResolution = QWindowsScreen::maxMonitorHorizResolution();
+        return maxResolution > 180 ? maxResolution / 96 : 1;
+    }
+    // Get factor from environment
+    bool ok = false;
+    const int envFactor = envDevicePixelRatioEnv.toInt(&ok);
+    return ok && envFactor > 0 ? envFactor : 1;
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowsscaling.h b/src/plugins/platforms/windows/qwindowsscaling.h
new file mode 100644
index 0000000000..99fec7c810
--- /dev/null
+++ b/src/plugins/platforms/windows/qwindowsscaling.h
@@ -0,0 +1,114 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWINDOWSSCALING_H
+#define QWINDOWSSCALING_H
+
+#include <QtGui/QRegion>
+#include <QtCore/QVector>
+#include <QtCore/QRect>
+
+QT_BEGIN_NAMESPACE
+
+enum
+#if defined(Q_COMPILER_CLASS_ENUM) || defined(Q_CC_MSVC)
+     : int
+#endif
+{ QWINDOWSIZE_MAX = 16777215 };
+
+class QWindowsScaling {
+public:
+    static bool isActive() { return m_factor > 1; }
+    static int factor()  { return m_factor; }
+    static void setFactor(int factor) { m_factor = factor; }
+    static int determineUiScaleFactor();
+
+    // Scaling helpers for size constraints.
+    static int mapToNativeConstrained(int qt)
+        { return m_factor != 1 && qt > 0 && qt < QWINDOWSIZE_MAX ? qt * m_factor : qt; }
+
+    static int mapFromNativeConstrained(int dp)
+        { return m_factor != 1 && dp > 0 && dp < QWINDOWSIZE_MAX ? dp / m_factor : dp; }
+
+    static QSize mapToNativeConstrained(const QSize &qt)
+        { return QSize(mapToNativeConstrained(qt.width()), mapToNativeConstrained(qt.height())); }
+
+    static QRect mapToNative(const QRect &qRect)
+    {
+        return QRect(qRect.x() * m_factor, qRect.y() * m_factor, qRect.width() * m_factor, qRect.height() * m_factor);
+    }
+
+    static QRect mapFromNative(const QRect &dp)
+    {
+        return isActive() ?
+            QRect(dp.x() / m_factor, dp.y() / m_factor, (dp.width() + 1) / m_factor, (dp.height() + 1) / m_factor) :
+            dp;
+    }
+
+    static QRegion mapToNative(const QRegion &regionQt)
+    {
+        if (!QWindowsScaling::isActive() || regionQt.isEmpty())
+            return regionQt;
+
+        QRegion result;
+        foreach (const QRect &rectQt, regionQt.rects())
+            result += QWindowsScaling::mapToNative(rectQt);
+        return result;
+    }
+
+    static QRegion mapFromNative(const QRegion &regionDp)
+    {
+        if (!QWindowsScaling::isActive() || regionDp.isEmpty())
+            return regionDp;
+
+        QRegion result;
+        foreach (const QRect &rectDp, regionDp.rects())
+            result += QWindowsScaling::mapFromNative(rectDp);
+        return result;
+    }
+
+private:
+    static int m_factor;
+};
+
+QT_END_NAMESPACE
+
+#endif // QWINDOWSSCALING_H
diff --git a/src/plugins/platforms/windows/qwindowsscreen.cpp b/src/plugins/platforms/windows/qwindowsscreen.cpp
index a6e2aabaf0..fd57d9ee61 100644
--- a/src/plugins/platforms/windows/qwindowsscreen.cpp
+++ b/src/plugins/platforms/windows/qwindowsscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,6 +60,21 @@ static inline QDpi deviceDPI(HDC hdc)
     return QDpi(GetDeviceCaps(hdc, LOGPIXELSX), GetDeviceCaps(hdc, LOGPIXELSY));
 }
 
+#ifndef Q_OS_WINCE
+
+static inline QDpi monitorDPI(HMONITOR hMonitor)
+{
+    if (QWindowsContext::shcoredll.isValid()) {
+        UINT dpiX;
+        UINT dpiY;
+        if (SUCCEEDED(QWindowsContext::shcoredll.getDpiForMonitor(hMonitor, 0, &dpiX, &dpiY)))
+            return QDpi(dpiX, dpiY);
+    }
+    return QDpi(0, 0);
+}
+
+#endif // !Q_OS_WINCE
+
 static inline QSizeF deviceSizeMM(const QSize &pixels, const QDpi &dpi)
 {
     const qreal inchToMM = 25.4;
@@ -86,21 +93,19 @@ static inline QDpi deviceDPI(const QSize &pixels, const QSizeF &physicalSizeMM)
 
 typedef QList<QWindowsScreenData> WindowsScreenDataList;
 
-// from QDesktopWidget, taking WindowsScreenDataList as LPARAM
-BOOL QT_WIN_CALLBACK monitorEnumCallback(HMONITOR hMonitor, HDC, LPRECT, LPARAM p)
+static bool monitorData(HMONITOR hMonitor, QWindowsScreenData *data)
 {
     MONITORINFOEX info;
     memset(&info, 0, sizeof(MONITORINFOEX));
     info.cbSize = sizeof(MONITORINFOEX);
     if (GetMonitorInfo(hMonitor, &info) == FALSE)
-        return TRUE;
+        return false;
 
-    WindowsScreenDataList *result = reinterpret_cast<WindowsScreenDataList *>(p);
-    QWindowsScreenData data;
-    data.geometry = QRect(QPoint(info.rcMonitor.left, info.rcMonitor.top), QPoint(info.rcMonitor.right - 1, info.rcMonitor.bottom - 1));
-    data.name = QString::fromWCharArray(info.szDevice);
-    if (data.name == QLatin1String("WinDisc")) {
-        data.flags |= QWindowsScreenData::LockScreen;
+    data->geometry = QRect(QPoint(info.rcMonitor.left, info.rcMonitor.top), QPoint(info.rcMonitor.right - 1, info.rcMonitor.bottom - 1));
+    data->availableGeometry = QRect(QPoint(info.rcWork.left, info.rcWork.top), QPoint(info.rcWork.right - 1, info.rcWork.bottom - 1));
+    data->name = QString::fromWCharArray(info.szDevice);
+    if (data->name == QLatin1String("WinDisc")) {
+        data->flags |= QWindowsScreenData::LockScreen;
     } else {
 #ifdef Q_OS_WINCE
         //Windows CE, just supports one Display and expects to get only DISPLAY,
@@ -110,37 +115,50 @@ BOOL QT_WIN_CALLBACK monitorEnumCallback(HMONITOR hMonitor, HDC, LPRECT, LPARAM
         HDC hdc = CreateDC(info.szDevice, NULL, NULL, NULL);
 #endif
         if (hdc) {
-            data.dpi = deviceDPI(hdc);
-            data.depth = GetDeviceCaps(hdc, BITSPIXEL);
-            data.format = data.depth == 16 ? QImage::Format_RGB16 : QImage::Format_RGB32;
-            data.physicalSizeMM = QSizeF(GetDeviceCaps(hdc, HORZSIZE), GetDeviceCaps(hdc, VERTSIZE));
+#ifndef Q_OS_WINCE
+            const QDpi dpi = monitorDPI(hMonitor);
+            data->dpi = dpi.first ? dpi : deviceDPI(hdc);
+#else
+            data->dpi = deviceDPI(hdc);
+#endif
+            data->depth = GetDeviceCaps(hdc, BITSPIXEL);
+            data->format = data->depth == 16 ? QImage::Format_RGB16 : QImage::Format_RGB32;
+            data->physicalSizeMM = QSizeF(GetDeviceCaps(hdc, HORZSIZE), GetDeviceCaps(hdc, VERTSIZE));
             const int refreshRate = GetDeviceCaps(hdc, VREFRESH);
             if (refreshRate > 1) // 0,1 means hardware default.
-                data.refreshRateHz = refreshRate;
+                data->refreshRateHz = refreshRate;
             DeleteDC(hdc);
         } else {
             qWarning("%s: Unable to obtain handle for monitor '%s', defaulting to %g DPI.",
                      __FUNCTION__, qPrintable(QString::fromWCharArray(info.szDevice)),
-                     data.dpi.first);
+                     data->dpi.first);
         } // CreateDC() failed
     } // not lock screen
-    data.geometry = QRect(QPoint(info.rcMonitor.left, info.rcMonitor.top), QPoint(info.rcMonitor.right - 1, info.rcMonitor.bottom - 1));
-    data.availableGeometry = QRect(QPoint(info.rcWork.left, info.rcWork.top), QPoint(info.rcWork.right - 1, info.rcWork.bottom - 1));
-    data.orientation = data.geometry.height() > data.geometry.width() ?
+    data->orientation = data->geometry.height() > data->geometry.width() ?
                        Qt::PortraitOrientation : Qt::LandscapeOrientation;
     // EnumDisplayMonitors (as opposed to EnumDisplayDevices) enumerates only
     // virtual desktop screens.
-    data.flags |= QWindowsScreenData::VirtualDesktop;
-    if (info.dwFlags & MONITORINFOF_PRIMARY) {
-        data.flags |= QWindowsScreenData::PrimaryScreen;
+    data->flags |= QWindowsScreenData::VirtualDesktop;
+    if (info.dwFlags & MONITORINFOF_PRIMARY)
+        data->flags |= QWindowsScreenData::PrimaryScreen;
+    return true;
+}
+
+// from QDesktopWidget, taking WindowsScreenDataList as LPARAM
+BOOL QT_WIN_CALLBACK monitorEnumCallback(HMONITOR hMonitor, HDC, LPRECT, LPARAM p)
+{
+    QWindowsScreenData data;
+    if (monitorData(hMonitor, &data)) {
+        WindowsScreenDataList *result = reinterpret_cast<WindowsScreenDataList *>(p);
         // QPlatformIntegration::screenAdded() documentation specifies that first
         // added screen will be the primary screen, so order accordingly.
         // Note that the side effect of this policy is that there is no way to change primary
         // screen reported by Qt, unless we want to delete all existing screens and add them
         // again whenever primary screen changes.
-        result->prepend(data);
-    } else {
-        result->append(data);
+        if (data.flags & QWindowsScreenData::PrimaryScreen)
+            result->prepend(data);
+        else
+            result->append(data);
     }
     return TRUE;
 }
@@ -197,14 +215,36 @@ QWindowsScreen::QWindowsScreen(const QWindowsScreenData &data) :
 {
 }
 
+BOOL QT_WIN_CALLBACK monitorResolutionEnumCallback(HMONITOR hMonitor, HDC, LPRECT, LPARAM p)
+{
+    QWindowsScreenData data;
+    if (monitorData(hMonitor, &data)) {
+        int *maxHorizResolution = reinterpret_cast<int *>(p);
+        const int horizResolution = qRound(data.dpi.first);
+        if (horizResolution > *maxHorizResolution)
+            *maxHorizResolution = horizResolution;
+    }
+    return TRUE;
+}
+
+int QWindowsScreen::maxMonitorHorizResolution()
+{
+    int result = 0;
+    EnumDisplayMonitors(0, 0, monitorResolutionEnumCallback, (LPARAM)&result);
+    return result;
+}
+
 Q_GUI_EXPORT QPixmap qt_pixmapFromWinHBITMAP(HBITMAP bitmap, int hbitmapFormat = 0);
 
-QPixmap QWindowsScreen::grabWindow(WId window, int x, int y, int width, int height) const
+QPixmap QWindowsScreen::grabWindow(WId window, int qX, int qY, int qWidth, int qHeight) const
 {
     RECT r;
     HWND hwnd = window ? (HWND)window : GetDesktopWindow();
     GetClientRect(hwnd, &r);
-
+    const int x = qX * QWindowsScaling::factor();
+    const int y = qY * QWindowsScaling::factor();
+    int width = qWidth * QWindowsScaling::factor();
+    int height = qHeight * QWindowsScaling::factor();
     if (width < 0) width = r.right - r.left;
     if (height < 0) height = r.bottom - r.top;
 
@@ -228,6 +268,10 @@ QPixmap QWindowsScreen::grabWindow(WId window, int x, int y, int width, int heig
     DeleteObject(bitmap);
     ReleaseDC(0, display_dc);
 
+    if (QWindowsScaling::isActive()) {
+        const qreal factor = 1.0 / qreal(QWindowsScaling::factor());
+        return pixmap.transformed(QTransform::fromScale(factor, factor));
+    }
     return pixmap;
 }
 
@@ -235,13 +279,12 @@ QPixmap QWindowsScreen::grabWindow(WId window, int x, int y, int width, int heig
     \brief Find a top level window taking the flags of ChildWindowFromPointEx.
 */
 
-QWindow *QWindowsScreen::findTopLevelAt(const QPoint &point, unsigned flags)
+QWindow *QWindowsScreen::topLevelAt(const QPoint &point) const
 {
-    QWindow* result = 0;
-    if (QPlatformWindow *bw = QWindowsContext::instance()->
-            findPlatformWindowAt(GetDesktopWindow(), point, flags))
-        result = QWindowsWindow::topLevelOf(bw->window());
-    qCDebug(lcQpaWindows) <<__FUNCTION__ << point << flags << result;
+    QWindow *result = 0;
+    if (QWindow *child = QWindowsScreen::windowAt(point * QWindowsScaling::factor(), CWP_SKIPINVISIBLE))
+        result = QWindowsWindow::topLevelOf(child);
+    qCDebug(lcQpaWindows) <<__FUNCTION__ << point << result;
     return result;
 }
 
@@ -255,15 +298,6 @@ QWindow *QWindowsScreen::windowAt(const QPoint &screenPoint, unsigned flags)
     return result;
 }
 
-QWindow *QWindowsScreen::windowUnderMouse(unsigned flags)
-{
-#ifndef QT_NO_CURSOR
-    return QWindowsScreen::windowAt(QWindowsCursor::mousePosition(), flags);
-#else
-    return 0;
-#endif
-}
-
 QWindowsScreen *QWindowsScreen::screenOf(const QWindow *w)
 {
     if (w)
@@ -304,15 +338,11 @@ void QWindowsScreen::handleChanges(const QWindowsScreenData &newData)
 {
     m_data.physicalSizeMM = newData.physicalSizeMM;
 
-    if (m_data.geometry != newData.geometry) {
+    if (m_data.geometry != newData.geometry || m_data.availableGeometry != newData.availableGeometry) {
         m_data.geometry = newData.geometry;
-        QWindowSystemInterface::handleScreenGeometryChange(screen(),
-                                                           newData.geometry);
-    }
-    if (m_data.availableGeometry != newData.availableGeometry) {
         m_data.availableGeometry = newData.availableGeometry;
-        QWindowSystemInterface::handleScreenAvailableGeometryChange(screen(),
-                                                                    newData.availableGeometry);
+        QWindowSystemInterface::handleScreenGeometryChange(screen(),
+                                                           newData.geometry, newData.availableGeometry);
     }
     if (!qFuzzyCompare(m_data.dpi.first, newData.dpi.first)
         || !qFuzzyCompare(m_data.dpi.second, newData.dpi.second)) {
@@ -387,6 +417,54 @@ static inline int indexOfMonitor(const QList<QWindowsScreenData> &screenData,
     return -1;
 }
 
+// Move a window to a new virtual screen, accounting for varying sizes.
+static void moveToVirtualScreen(QWindow *w, const QScreen *newScreen)
+{
+    QRect geometry = w->geometry();
+    const QRect oldScreenGeometry = w->screen()->geometry();
+    const QRect newScreenGeometry = newScreen->geometry();
+    QPoint relativePosition = geometry.topLeft() - oldScreenGeometry.topLeft();
+    if (oldScreenGeometry.size() != newScreenGeometry.size()) {
+        const qreal factor =
+            qreal(QPoint(newScreenGeometry.width(), newScreenGeometry.height()).manhattanLength()) /
+            qreal(QPoint(oldScreenGeometry.width(), oldScreenGeometry.height()).manhattanLength());
+        relativePosition = (QPointF(relativePosition) * factor).toPoint();
+    }
+    geometry.moveTopLeft(relativePosition);
+    w->setGeometry(geometry);
+}
+
+void QWindowsScreenManager::removeScreen(int index)
+{
+    qCDebug(lcQpaWindows) << "Removing Monitor:" << m_screens.at(index)->data();
+    QScreen *screen = m_screens.at(index)->screen();
+    QScreen *primaryScreen = QGuiApplication::primaryScreen();
+    // QTBUG-38650: When a screen is disconnected, Windows will automatically
+    // move the Window to another screen. This will trigger a geometry change
+    // event, but unfortunately after the screen destruction signal. To prevent
+    // QtGui from automatically hiding the QWindow, pretend all Windows move to
+    // the primary screen first (which is likely the correct, final screen).
+    // QTBUG-39320: Windows does not automatically move WS_EX_TOOLWINDOW (dock) windows;
+    // move those manually.
+    if (screen != primaryScreen) {
+        unsigned movedWindowCount = 0;
+        foreach (QWindow *w, QGuiApplication::topLevelWindows()) {
+            if (w->screen() == screen && w->handle() && w->type() != Qt::Desktop) {
+                if (w->isVisible() && w->windowState() != Qt::WindowMinimized
+                    && (QWindowsWindow::baseWindowOf(w)->exStyle() & WS_EX_TOOLWINDOW)) {
+                    moveToVirtualScreen(w, primaryScreen);
+                } else {
+                    QWindowSystemInterface::handleWindowScreenChanged(w, primaryScreen);
+                }
+                ++movedWindowCount;
+            }
+        }
+        if (movedWindowCount)
+            QWindowSystemInterface::flushWindowSystemEvents();
+    }
+    delete m_screens.takeAt(index);
+}
+
 /*!
     \brief Synchronizes the screen list, adds new screens, removes deleted
     ones and propagates resolution changes to QWindowSystemInterface.
@@ -412,10 +490,8 @@ bool QWindowsScreenManager::handleScreenChanges()
     // temporary lock screen to avoid window recreation (QTBUG-33062).
     if (!lockScreen) {
         for (int i = m_screens.size() - 1; i >= 0; --i) {
-            if (indexOfMonitor(newDataList, m_screens.at(i)->data().name) == -1) {
-                qCDebug(lcQpaWindows) << "Removing Monitor: " << m_screens.at(i) ->data();
-                delete m_screens.takeAt(i);
-            } // not found
+            if (indexOfMonitor(newDataList, m_screens.at(i)->data().name) == -1)
+                removeScreen(i);
         }     // for existing screens
     }     // not lock screen
     return true;
diff --git a/src/plugins/platforms/windows/qwindowsscreen.h b/src/plugins/platforms/windows/qwindowsscreen.h
index 930814a17d..aa1408358b 100644
--- a/src/plugins/platforms/windows/qwindowsscreen.h
+++ b/src/plugins/platforms/windows/qwindowsscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,11 +35,13 @@
 #define QWINDOWSSCREEN_H
 
 #include "qwindowscursor.h"
+#include "qwindowsscaling.h"
 #ifdef Q_OS_WINCE
 #  include "qplatformfunctions_wince.h"
 #endif
 
 #include <QtCore/QList>
+#include <QtCore/QVector>
 #include <QtCore/QPair>
 #include <QtCore/QSharedPointer>
 #include <qpa/qplatformscreen.h>
@@ -88,24 +82,24 @@ public:
 
     static QWindowsScreen *screenOf(const QWindow *w = 0);
 
-    virtual QRect geometry() const { return m_data.geometry; }
-    virtual QRect availableGeometry() const { return m_data.availableGeometry; }
-    virtual int depth() const { return m_data.depth; }
-    virtual QImage::Format format() const { return m_data.format; }
-    virtual QSizeF physicalSize() const { return m_data.physicalSizeMM; }
-    virtual QDpi logicalDpi() const { return m_data.dpi; }
-    virtual qreal refreshRate() const { return m_data.refreshRateHz; }
-    virtual QString name() const { return m_data.name; }
-    virtual Qt::ScreenOrientation primaryOrientation() { return m_data.orientation; }
-    virtual QList<QPlatformScreen *> virtualSiblings() const;
-    virtual QWindow *topLevelAt(const QPoint &point) const
-        {  return QWindowsScreen::findTopLevelAt(point, CWP_SKIPINVISIBLE);  }
-
-    static QWindow *findTopLevelAt(const QPoint &point, unsigned flags);
-    static QWindow *windowAt(const QPoint &point, unsigned flags = CWP_SKIPINVISIBLE);
-    static QWindow *windowUnderMouse(unsigned flags = CWP_SKIPINVISIBLE);
-
-    virtual QPixmap grabWindow(WId window, int x, int y, int width, int height) const;
+    QRect geometryDp() const { return m_data.geometry; }
+    QRect geometry() const Q_DECL_OVERRIDE { return QWindowsScaling::mapFromNative(geometryDp()); }
+    QRect availableGeometryDp() const { return m_data.availableGeometry; }
+    QRect availableGeometry() const Q_DECL_OVERRIDE { return QWindowsScaling::mapFromNative(availableGeometryDp()); }
+    int depth() const Q_DECL_OVERRIDE { return m_data.depth; }
+    QImage::Format format() const Q_DECL_OVERRIDE { return m_data.format; }
+    QSizeF physicalSize() const Q_DECL_OVERRIDE { return m_data.physicalSizeMM; }
+    QDpi logicalDpi() const Q_DECL_OVERRIDE
+        { return QDpi(m_data.dpi.first / QWindowsScaling::factor(), m_data.dpi.second / QWindowsScaling::factor()); }
+    qreal devicePixelRatio() const Q_DECL_OVERRIDE { return QWindowsScaling::factor(); }
+    qreal refreshRate() const Q_DECL_OVERRIDE { return m_data.refreshRateHz; }
+    QString name() const Q_DECL_OVERRIDE { return m_data.name; }
+    Qt::ScreenOrientation orientation() const Q_DECL_OVERRIDE { return m_data.orientation; }
+    QList<QPlatformScreen *> virtualSiblings() const Q_DECL_OVERRIDE;
+    QWindow *topLevelAt(const QPoint &point) const Q_DECL_OVERRIDE;
+    static QWindow *windowAt(const QPoint &point, unsigned flags);
+
+    QPixmap grabWindow(WId window, int qX, int qY, int qWidth, int qHeight) const Q_DECL_OVERRIDE;
 
     inline void handleChanges(const QWindowsScreenData &newData);
 
@@ -117,6 +111,7 @@ public:
 #endif // !QT_NO_CURSOR
 
     const QWindowsScreenData &data() const  { return m_data; }
+    static int maxMonitorHorizResolution();
 
 private:
     QWindowsScreenData m_data;
@@ -143,6 +138,8 @@ public:
     const WindowsScreenList &screens() const { return m_screens; }
 
 private:
+    void removeScreen(int index);
+
     WindowsScreenList m_screens;
     int m_lastDepth;
     WORD m_lastHorizontalResolution;
diff --git a/src/plugins/platforms/windows/qwindowsservices.cpp b/src/plugins/platforms/windows/qwindowsservices.cpp
index 546957a043..7d859ca57a 100644
--- a/src/plugins/platforms/windows/qwindowsservices.cpp
+++ b/src/plugins/platforms/windows/qwindowsservices.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowsservices.h b/src/plugins/platforms/windows/qwindowsservices.h
index 95f1e9f9a5..321c005d66 100644
--- a/src/plugins/platforms/windows/qwindowsservices.h
+++ b/src/plugins/platforms/windows/qwindowsservices.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowssessionmanager.cpp b/src/plugins/platforms/windows/qwindowssessionmanager.cpp
index e86722f953..84f8c6a982 100644
--- a/src/plugins/platforms/windows/qwindowssessionmanager.cpp
+++ b/src/plugins/platforms/windows/qwindowssessionmanager.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowssessionmanager.h b/src/plugins/platforms/windows/qwindowssessionmanager.h
index 0443635c35..04430eb959 100644
--- a/src/plugins/platforms/windows/qwindowssessionmanager.h
+++ b/src/plugins/platforms/windows/qwindowssessionmanager.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@edeltech.ch>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowstabletsupport.cpp b/src/plugins/platforms/windows/qwindowstabletsupport.cpp
index 8ceab02311..aeaff989c3 100644
--- a/src/plugins/platforms/windows/qwindowstabletsupport.cpp
+++ b/src/plugins/platforms/windows/qwindowstabletsupport.cpp
@@ -5,47 +5,41 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qwindowstabletsupport.h"
+#include "qwindowsscaling.h"
 
 #ifndef QT_NO_TABLETEVENT
 
 #include "qwindowscontext.h"
 #include "qwindowskeymapper.h"
 #include "qwindowswindow.h"
+#include "qwindowsscreen.h"
 
 #include <qpa/qwindowsysteminterface.h>
 
@@ -275,6 +269,8 @@ static inline QTabletEvent::TabletDevice deviceType(const UINT cursorType)
 {
     if (((cursorType & 0x0006) == 0x0002) && ((cursorType & CursorTypeBitMask) != 0x0902))
         return QTabletEvent::Stylus;
+    if (cursorType == 0x4020) // Surface Pro 2 tablet device
+        return QTabletEvent::Stylus;
     switch (cursorType & CursorTypeBitMask) {
     case 0x0802:
         return QTabletEvent::Stylus;
@@ -403,7 +399,8 @@ bool QWindowsTabletSupport::translateTabletPacketEvent()
     //    in which case we snap the position to the mouse position.
     // It seems there is no way to find out the mode programmatically, the LOGCONTEXT orgX/Y/Ext
     // area is always the virtual desktop.
-    const QRect virtualDesktopArea = QGuiApplication::primaryScreen()->virtualGeometry();
+    const QRect virtualDesktopArea
+        = QWindowsScaling::mapToNative(QGuiApplication::primaryScreen()->virtualGeometry());
 
     qCDebug(lcQpaTablet) << __FUNCTION__ << "processing " << packetCount
         << "target:" << QGuiApplicationPrivate::tabletPressTarget;
@@ -423,7 +420,7 @@ bool QWindowsTabletSupport::translateTabletPacketEvent()
         QPoint globalPos = globalPosF.toPoint();
 
         // Get Mouse Position and compare to tablet info
-        const QPoint mouseLocation = QWindowsCursor::mousePosition();
+        QPoint mouseLocation = QWindowsCursor::mousePosition();
 
         // Positions should be almost the same if we are in absolute
         // mode. If they are not, use the mouse location.
@@ -433,8 +430,7 @@ bool QWindowsTabletSupport::translateTabletPacketEvent()
         }
 
         if (!target)
-            if (QPlatformWindow *pw = QWindowsContext::instance()->findPlatformWindowAt(GetDesktopWindow(), globalPos, CWP_SKIPINVISIBLE | CWP_SKIPTRANSPARENT))
-                target = pw->window();
+            target = QWindowsScreen::windowAt(globalPos, CWP_SKIPINVISIBLE | CWP_SKIPTRANSPARENT);
         if (!target)
             continue;
 
@@ -465,7 +461,9 @@ bool QWindowsTabletSupport::translateTabletPacketEvent()
             const double degY = atan(cos(radAzim) / tanAlt);
             tiltX = int(degX * (180 / M_PI));
             tiltY = int(-degY * (180 / M_PI));
-            rotation = packet.pkOrientation.orTwist;
+            rotation = 360.0 - (packet.pkOrientation.orTwist / 10.0);
+            if (rotation > 180.0)
+                rotation -= 360.0;
         }
 
         if (QWindowsContext::verbose > 1)  {
@@ -477,8 +475,11 @@ bool QWindowsTabletSupport::translateTabletPacketEvent()
                 << tiltY << "tanP:" << tangentialPressure << "rotation:" << rotation;
         }
 
-        QWindowSystemInterface::handleTabletEvent(target, packet.pkButtons, localPos, globalPosF,
+        const QPointF localPosDip = QPointF(localPos / QWindowsScaling::factor());
+        const QPointF globalPosDip = globalPosF / qreal(QWindowsScaling::factor());
+        QWindowSystemInterface::handleTabletEvent(target, localPosDip, globalPosDip,
                                                   currentDevice, currentPointer,
+                                                  static_cast<Qt::MouseButtons>(packet.pkButtons),
                                                   pressureNew, tiltX, tiltY,
                                                   tangentialPressure, rotation, z,
                                                   m_devices.at(m_currentDevice).uniqueId,
diff --git a/src/plugins/platforms/windows/qwindowstabletsupport.h b/src/plugins/platforms/windows/qwindowstabletsupport.h
index 527d9dbf37..e148275cf1 100644
--- a/src/plugins/platforms/windows/qwindowstabletsupport.h
+++ b/src/plugins/platforms/windows/qwindowstabletsupport.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/windows/qwindowstheme.cpp b/src/plugins/platforms/windows/qwindowstheme.cpp
index 6a3930dc78..66735d86c9 100644
--- a/src/plugins/platforms/windows/qwindowstheme.cpp
+++ b/src/plugins/platforms/windows/qwindowstheme.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,7 @@
 #include "qwindowsintegration.h"
 #include "qt_windows.h"
 #include "qwindowsfontdatabase.h"
+#include "qwindowsscaling.h"
 #ifdef Q_OS_WINCE
 #  include "qplatformfunctions_wince.h"
 #  include "winuser.h"
@@ -144,7 +137,7 @@ static inline QColor mixColors(const QColor &c1, const QColor &c2)
 
 static inline QColor getSysColor(int index)
 {
-    return qColorToCOLORREF(GetSysColor(index));
+    return COLORREFToQColor(GetSysColor(index));
 }
 
 // from QStyle::standardPalette
@@ -491,6 +484,8 @@ static QPixmap loadIconFromShell32(int resourceId, QSizeF size)
 
 QPixmap QWindowsTheme::standardPixmap(StandardPixmap sp, const QSizeF &size) const
 {
+    const int scaleFactor = QWindowsScaling::factor();
+    const QSizeF pixmapSize = size * scaleFactor;
     int resourceId = -1;
     LPCTSTR iconName = 0;
     switch (sp) {
@@ -557,9 +552,10 @@ QPixmap QWindowsTheme::standardPixmap(StandardPixmap sp, const QSizeF &size) con
             SHSTOCKICONINFO iconInfo;
             memset(&iconInfo, 0, sizeof(iconInfo));
             iconInfo.cbSize = sizeof(iconInfo);
-            const int iconSize = size.width() > 16 ? SHGFI_LARGEICON : SHGFI_SMALLICON;
+            const int iconSize = pixmapSize.width() > 16 ? SHGFI_LARGEICON : SHGFI_SMALLICON;
             if (QWindowsContext::shell32dll.sHGetStockIconInfo(SIID_SHIELD, SHGFI_ICON | iconSize, &iconInfo) == S_OK) {
                 pixmap = qt_pixmapFromWinHICON(iconInfo.hIcon);
+                pixmap.setDevicePixelRatio(scaleFactor);
                 DestroyIcon(iconInfo.hIcon);
                 return pixmap;
             }
@@ -571,13 +567,14 @@ QPixmap QWindowsTheme::standardPixmap(StandardPixmap sp, const QSizeF &size) con
     }
 
     if (resourceId != -1) {
-        QPixmap pixmap = loadIconFromShell32(resourceId, size);
+        QPixmap pixmap = loadIconFromShell32(resourceId, pixmapSize);
         if (!pixmap.isNull()) {
             if (sp == FileLinkIcon || sp == DirLinkIcon || sp == DirLinkOpenIcon) {
                 QPainter painter(&pixmap);
-                QPixmap link = loadIconFromShell32(30, size);
-                painter.drawPixmap(0, 0, size.width(), size.height(), link);
+                QPixmap link = loadIconFromShell32(30, pixmapSize);
+                painter.drawPixmap(0, 0, pixmapSize.width(), pixmapSize.height(), link);
             }
+            pixmap.setDevicePixelRatio(scaleFactor);
             return pixmap;
         }
     }
@@ -585,6 +582,7 @@ QPixmap QWindowsTheme::standardPixmap(StandardPixmap sp, const QSizeF &size) con
     if (iconName) {
         HICON iconHandle = LoadIcon(NULL, iconName);
         QPixmap pixmap = qt_pixmapFromWinHICON(iconHandle);
+        pixmap.setDevicePixelRatio(scaleFactor);
         DestroyIcon(iconHandle);
         if (!pixmap.isNull())
             return pixmap;
diff --git a/src/plugins/platforms/windows/qwindowstheme.h b/src/plugins/platforms/windows/qwindowstheme.h
index 9346621d59..8857e53b75 100644
--- a/src/plugins/platforms/windows/qwindowstheme.h
+++ b/src/plugins/platforms/windows/qwindowstheme.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,17 +51,17 @@ public:
 
     static QWindowsTheme *instance() { return m_instance; }
 
-    virtual bool usePlatformNativeDialog(DialogType type) const;
-    virtual QPlatformDialogHelper *createPlatformDialogHelper(DialogType type) const;
-    virtual QVariant themeHint(ThemeHint) const;
+    bool usePlatformNativeDialog(DialogType type) const Q_DECL_OVERRIDE;
+    QPlatformDialogHelper *createPlatformDialogHelper(DialogType type) const Q_DECL_OVERRIDE;
+    QVariant themeHint(ThemeHint) const Q_DECL_OVERRIDE;
     virtual const QPalette *palette(Palette type = SystemPalette) const
         { return m_palettes[type]; }
     virtual const QFont *font(Font type = SystemFont) const
         { return m_fonts[type]; }
 
-    virtual QPixmap standardPixmap(StandardPixmap sp, const QSizeF &size) const;
-    virtual QPixmap fileIconPixmap(const QFileInfo &fileInfo, const QSizeF &size,
-                                   QPlatformTheme::IconOptions iconOptions = 0) const;
+    QPixmap standardPixmap(StandardPixmap sp, const QSizeF &size) const Q_DECL_OVERRIDE;
+    QPixmap fileIconPixmap(const QFileInfo &fileInfo, const QSizeF &size,
+                           QPlatformTheme::IconOptions iconOptions = 0) const Q_DECL_OVERRIDE;
 
     void windowsThemeChanged(QWindow *window);
 
diff --git a/src/plugins/platforms/windows/qwindowswindow.cpp b/src/plugins/platforms/windows/qwindowswindow.cpp
index 0382144cbe..dd9b9de0b6 100644
--- a/src/plugins/platforms/windows/qwindowswindow.cpp
+++ b/src/plugins/platforms/windows/qwindowswindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,19 +36,16 @@
 #include "qwindowscontext.h"
 #include "qwindowsdrag.h"
 #include "qwindowsscreen.h"
+#include "qwindowsscaling.h"
 #ifdef QT_NO_CURSOR
 #  include "qwindowscursor.h"
 #endif
 
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-#  include "qwindowseglcontext.h"
-#  include <QtGui/QOpenGLFunctions>
-#endif
-
 #include <QtGui/QGuiApplication>
 #include <QtGui/QScreen>
 #include <QtGui/QWindow>
 #include <QtGui/QRegion>
+#include <QtGui/QOpenGLContext>
 #include <private/qsystemlibrary_p.h>
 #include <private/qwindow_p.h>
 #include <private/qguiapplication_p.h>
@@ -110,6 +99,8 @@ static QByteArray debugWinExStyle(DWORD exStyle)
         rc += " WS_EX_CONTEXTHELP";
     if (exStyle & WS_EX_LAYERED)
         rc += " WS_EX_LAYERED";
+    if (exStyle & WS_EX_DLGMODALFRAME)
+        rc += " WS_EX_DLGMODALFRAME";
     return rc;
 }
 
@@ -183,6 +174,15 @@ QDebug operator<<(QDebug d, const NCCALCSIZE_PARAMS &p)
 static inline QRect frameGeometry(HWND hwnd, bool topLevel)
 {
     RECT rect = { 0, 0, 0, 0 };
+#ifndef Q_OS_WINCE
+    if (topLevel) {
+        WINDOWPLACEMENT windowPlacement;
+        windowPlacement.length = sizeof(WINDOWPLACEMENT);
+        GetWindowPlacement(hwnd, &windowPlacement);
+        if (windowPlacement.showCmd == SW_SHOWMINIMIZED)
+            return qrectFromRECT(windowPlacement.rcNormalPosition);
+    }
+#endif // !Q_OS_WINCE
     GetWindowRect(hwnd, &rect); // Screen coordinates.
     const HWND parent = GetParent(hwnd);
     if (parent && !topLevel) {
@@ -513,6 +513,10 @@ void WindowCreationData::fromWindow(const QWindow *w, const Qt::WindowFlags flag
                 }
                 if (flags & Qt::WindowSystemMenuHint)
                     style |= WS_SYSMENU;
+                else if (dialog) {
+                    style |= WS_SYSMENU | WS_BORDER; // QTBUG-2027, dialogs without system menu.
+                    exStyle |= WS_EX_DLGMODALFRAME;
+                }
                 if (flags & Qt::WindowMinimizeButtonHint)
                     style |= WS_MINIMIZEBOX;
                 if (shouldShowMaximizeButton(w, flags))
@@ -566,7 +570,9 @@ QWindowsWindowData
 
     const QString windowClassName = QWindowsContext::instance()->registerWindowClass(w, isGL);
 
-    QRect rect = QPlatformWindow::initialGeometry(w, data.geometry, defaultWindowWidth, defaultWindowHeight);
+    const QRect geometryDip = QWindowsScaling::mapFromNative(data.geometry);
+    QRect fixedGeometryDip = QPlatformWindow::initialGeometry(w, geometryDip, defaultWindowWidth, defaultWindowHeight);
+    const QRect rect = fixedGeometryDip != geometryDip ? QWindowsScaling::mapToNative(fixedGeometryDip) : data.geometry;
 
     if (title.isEmpty() && (result.flags & Qt::WindowTitleHint))
         title = topLevel ? qAppName() : w->objectName();
@@ -646,7 +652,7 @@ void WindowCreationData::initialize(HWND hwnd, bool frameChange, qreal opacityLe
         } else if (flags & Qt::WindowStaysOnBottomHint) {
             SetWindowPos(hwnd, HWND_BOTTOM, 0, 0, 0, 0, swpFlags);
         } else if (frameChange) { // Force WM_NCCALCSIZE with wParam=1 in case of custom margins.
-            SetWindowPos(hwnd, 0, 0, 0, 0, 0, swpFlags);
+            SetWindowPos(hwnd, HWND_NOTOPMOST, 0, 0, 0, 0, swpFlags);
         }
         if (flags & (Qt::CustomizeWindowHint|Qt::WindowTitleHint)) {
             HMENU systemMenu = GetSystemMenu(hwnd, FALSE);
@@ -673,11 +679,9 @@ void WindowCreationData::initialize(HWND hwnd, bool frameChange, qreal opacityLe
     \ingroup qt-lighthouse-win
 */
 
-#define QWINDOWSIZE_MAX ((1<<24)-1)
-
 QWindowsGeometryHint::QWindowsGeometryHint(const QWindow *w, const QMargins &cm) :
-     minimumSize(w->minimumSize()),
-     maximumSize(w->maximumSize()),
+     minimumSize(QWindowsScaling::mapToNativeConstrained(w->minimumSize())),
+     maximumSize(QWindowsScaling::mapToNativeConstrained(w->maximumSize())),
      customMargins(cm)
 {
 }
@@ -758,9 +762,8 @@ void QWindowsGeometryHint::applyToMinMaxInfo(DWORD style, DWORD exStyle, MINMAXI
     const int maximumHeight = qMax(maximumSize.height(), minimumSize.height());
     if (maximumWidth < QWINDOWSIZE_MAX)
         mmi->ptMaxTrackSize.x = maximumWidth + frameWidth;
-    // windows with title bar have an implicit size limit of 112 pixels
     if (maximumHeight < QWINDOWSIZE_MAX)
-        mmi->ptMaxTrackSize.y = qMax(maximumHeight + frameHeight, 112);
+        mmi->ptMaxTrackSize.y = maximumHeight + frameHeight;
     qCDebug(lcQpaWindows).nospace() << '<' << __FUNCTION__
         << " frame=" << margins << ' ' << frameWidth << ',' << frameHeight
         << " out " << *mmi;
@@ -861,15 +864,13 @@ QWindowsWindow::QWindowsWindow(QWindow *aWindow, const QWindowsWindowData &data)
     m_opacity(1.0),
     m_dropTarget(0),
     m_savedStyle(0),
-    m_format(aWindow->format()),
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    m_eglSurface(0),
-#endif
+    m_format(aWindow->requestedFormat()),
 #ifdef Q_OS_WINCE
     m_previouslyHidden(false),
 #endif
     m_iconSmall(0),
-    m_iconBig(0)
+    m_iconBig(0),
+    m_surface(0)
 {
     // Clear the creation context as the window can be found in QWindowsContext's map.
     QWindowsContext::instance()->setWindowCreationContext(QSharedPointer<QWindowCreationContext>());
@@ -877,13 +878,14 @@ QWindowsWindow::QWindowsWindow(QWindow *aWindow, const QWindowsWindowData &data)
     const Qt::WindowType type = aWindow->type();
     if (type == Qt::Desktop)
         return; // No further handling for Qt::Desktop
+#ifndef QT_NO_OPENGL
     if (aWindow->surfaceType() == QWindow::OpenGLSurface) {
-        setFlag(OpenGLSurface);
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-        if (QOpenGLContext::openGLModuleType() != QOpenGLContext::LibGL)
+        if (QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGL)
+            setFlag(OpenGLSurface);
+        else
             setFlag(OpenGL_ES2);
-#endif
     }
+#endif // QT_NO_OPENGL
     updateDropSite();
 
 #ifndef Q_OS_WINCE
@@ -921,7 +923,8 @@ void QWindowsWindow::fireExpose(const QRegion &region, bool force)
         clearFlag(Exposed);
     else
         setFlag(Exposed);
-    QWindowSystemInterface::handleExposeEvent(window(), region);
+    QWindowSystemInterface::handleExposeEvent(window(),
+                                              QWindowsScaling::mapFromNative(region));
 }
 
 static inline QWindow *findTransientChild(const QWindow *parent)
@@ -947,11 +950,10 @@ void QWindowsWindow::destroyWindow()
         if (hasMouseCapture())
             setMouseGrabEnabled(false);
         setDropSiteEnabled(false);
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-        if (m_eglSurface) {
-            qCDebug(lcQpaGl) << __FUNCTION__ << "Freeing EGL surface " << m_eglSurface << window();
-            eglDestroySurface(m_staticEglContext->display(), m_eglSurface);
-            m_eglSurface = 0;
+#ifndef QT_NO_OPENGL
+        if (m_surface) {
+            m_data.staticOpenGLContext->destroyWindowSurface(m_surface);
+            m_surface = 0;
         }
 #endif
 #ifdef Q_OS_WINCE
@@ -1098,7 +1100,7 @@ bool QWindowsWindow::isEmbedded(const QPlatformWindow *parentWindow) const
     return m_data.embedded;
 }
 
-QPoint QWindowsWindow::mapToGlobal(const QPoint &pos) const
+QPoint QWindowsWindow::mapToGlobalDp(const QPoint &pos) const
 {
     if (m_data.hwnd)
         return QWindowsGeometryHint::mapToGlobal(m_data.hwnd, pos);
@@ -1106,7 +1108,7 @@ QPoint QWindowsWindow::mapToGlobal(const QPoint &pos) const
         return pos;
 }
 
-QPoint QWindowsWindow::mapFromGlobal(const QPoint &pos) const
+QPoint QWindowsWindow::mapFromGlobalDp(const QPoint &pos) const
 {
     if (m_data.hwnd)
         return QWindowsGeometryHint::mapFromGlobal(m_data.hwnd, pos);
@@ -1278,22 +1280,22 @@ static QRect normalFrameGeometry(HWND hwnd)
     return QRect();
 }
 
-QRect QWindowsWindow::normalGeometry() const
+QRect QWindowsWindow::normalGeometryDp() const
 {
     // Check for fake 'fullscreen' mode.
     const bool fakeFullScreen = m_savedFrameGeometry.isValid() && window()->windowState() == Qt::WindowFullScreen;
     const QRect frame = fakeFullScreen ? m_savedFrameGeometry : normalFrameGeometry(m_data.hwnd);
-    const QMargins margins = fakeFullScreen ? QWindowsGeometryHint::frame(m_savedStyle, 0) : frameMargins();
+    const QMargins margins = fakeFullScreen ? QWindowsGeometryHint::frame(m_savedStyle, 0) : frameMarginsDp();
     return frame.isValid() ? frame.marginsRemoved(margins) : frame;
 }
 
-void QWindowsWindow::setGeometry(const QRect &rectIn)
+void QWindowsWindow::setGeometryDp(const QRect &rectIn)
 {
     QRect rect = rectIn;
     // This means it is a call from QWindow::setFramePosition() and
     // the coordinates include the frame (size is still the contents rectangle).
     if (QWindowsGeometryHint::positionIncludesFrame(window())) {
-        const QMargins margins = frameMargins();
+        const QMargins margins = frameMarginsDp();
         rect.moveTopLeft(rect.topLeft() + QPoint(margins.left(), margins.top()));
     }
     const QSize oldSize = m_data.geometry.size();
@@ -1375,13 +1377,19 @@ void QWindowsWindow::handleGeometryChange()
         return;
     const QRect previousGeometry = m_data.geometry;
     m_data.geometry = geometry_sys();
-    QPlatformWindow::setGeometry(m_data.geometry);
-    QWindowSystemInterface::handleGeometryChange(window(), m_data.geometry);
+    const QRect geometryDip = QWindowsScaling::mapFromNative(m_data.geometry);
+    QPlatformWindow::setGeometry(geometryDip);
+    QWindowSystemInterface::handleGeometryChange(window(), geometryDip);
     // QTBUG-32121: OpenGL/normal windows (with exception of ANGLE) do not receive
     // expose events when shrinking, synthesize.
     if (!testFlag(OpenGL_ES2) && isExposed()
         && !(m_data.geometry.width() > previousGeometry.width() || m_data.geometry.height() > previousGeometry.height())) {
-        fireExpose(QRegion(m_data.geometry), true);
+        fireExpose(QRect(QPoint(0, 0), m_data.geometry.size()), true);
+    }
+    if (previousGeometry.topLeft() != m_data.geometry.topLeft()) {
+        QPlatformScreen *newScreen = screenForGeometry(m_data.geometry);
+        if (newScreen != screen())
+            QWindowSystemInterface::handleWindowScreenChanged(window(), newScreen->screen());
     }
     if (testFlag(SynchronousGeometryChangeEvent))
         QWindowSystemInterface::flushWindowSystemEvents();
@@ -1391,7 +1399,7 @@ void QWindowsWindow::handleGeometryChange()
 
 void QWindowsWindow::setGeometry_sys(const QRect &rect) const
 {
-    const QMargins margins = frameMargins();
+    const QMargins margins = frameMarginsDp();
     const QRect frameGeometry = rect + margins;
 
     qCDebug(lcQpaWindows) << '>' << __FUNCTION__ << this << window()
@@ -1399,22 +1407,37 @@ void QWindowsWindow::setGeometry_sys(const QRect &rect) const
                  << margins << " to " <<rect
                  << " new frame: " << frameGeometry;
 
-    const bool rc = MoveWindow(m_data.hwnd, frameGeometry.x(), frameGeometry.y(),
-                               frameGeometry.width(), frameGeometry.height(), true);
+    bool result = false;
+#ifndef Q_OS_WINCE
+    WINDOWPLACEMENT windowPlacement;
+    windowPlacement.length = sizeof(WINDOWPLACEMENT);
+    GetWindowPlacement(m_data.hwnd, &windowPlacement);
+    // If the window is hidden and in maximized state or minimized, instead of moving the
+    // window, set the normal position of the window.
+    if ((windowPlacement.showCmd == SW_MAXIMIZE && !IsWindowVisible(m_data.hwnd))
+        || windowPlacement.showCmd == SW_SHOWMINIMIZED) {
+        windowPlacement.rcNormalPosition = RECTfromQRect(frameGeometry);
+        windowPlacement.showCmd = windowPlacement.showCmd == SW_SHOWMINIMIZED ? SW_SHOWMINIMIZED : SW_HIDE;
+        result = SetWindowPlacement(m_data.hwnd, &windowPlacement);
+    } else
+#endif // !Q_OS_WINCE
+    {
+        result = MoveWindow(m_data.hwnd, frameGeometry.x(), frameGeometry.y(),
+                            frameGeometry.width(), frameGeometry.height(), true);
+    }
     qCDebug(lcQpaWindows) << '<' << __FUNCTION__ << this << window()
-        << "    \n resulting " << rc << geometry_sys();
+        << "    \n resulting " << result << geometry_sys();
 }
 
 QRect QWindowsWindow::frameGeometry_sys() const
 {
-    // Warning: Returns bogus values when minimized.
     bool isRealTopLevel = window()->isTopLevel() && !m_data.embedded;
     return frameGeometry(m_data.hwnd, isRealTopLevel);
 }
 
 QRect QWindowsWindow::geometry_sys() const
 {
-    return frameGeometry_sys().marginsRemoved(frameMargins());
+    return frameGeometry_sys().marginsRemoved(frameMarginsDp());
 }
 
 /*!
@@ -1487,7 +1510,7 @@ void QWindowsWindow::setWindowFlags(Qt::WindowFlags flags)
     qCDebug(lcQpaWindows) << '>' << __FUNCTION__ << this << window() << "\n    from: "
         << QWindowsWindow::debugWindowFlags(m_data.flags)
         << "\n    to: " << QWindowsWindow::debugWindowFlags(flags);
-    const QRect oldGeometry = geometry();
+    const QRect oldGeometry = geometryDp();
     if (m_data.flags != flags) {
         m_data.flags = flags;
         if (m_data.hwnd) {
@@ -1573,23 +1596,10 @@ void QWindowsWindow::setWindowState(Qt::WindowState state)
     }
 }
 
-// Return the effective screen for full screen mode in a virtual desktop.
-static const QScreen *effectiveScreen(const QWindow *w)
-{
-    QPoint center = w->geometry().center();
-    if (!w->isTopLevel())
-        center = w->mapToGlobal(center);
-    const QScreen *screen = w->screen();
-    if (!screen->geometry().contains(center))
-        foreach (const QScreen *sibling, screen->virtualSiblings())
-            if (sibling->geometry().contains(center))
-                return sibling;
-    return screen;
-}
-
 bool QWindowsWindow::isFullScreen_sys() const
 {
-    return window()->isTopLevel() && geometry_sys() == effectiveScreen(window())->geometry();
+    return window()->isTopLevel()
+        && geometry_sys() == QWindowsScaling::mapToNative(window()->screen()->geometry());
 }
 
 /*!
@@ -1669,15 +1679,16 @@ void QWindowsWindow::setWindowState_sys(Qt::WindowState newState)
             setStyle(newStyle);
             // Use geometry of QWindow::screen() within creation or the virtual screen the
             // window is in (QTBUG-31166, QTBUG-30724).
-            const QScreen *screen = testFlag(WithinCreate) ? window()->screen() : effectiveScreen(window());
-            const QRect r = screen->geometry();
+            const QScreen *screen = window()->screen();
+            const QRect rDip = screen->geometry();
+            const QRect r = QWindowsScaling::mapToNative(rDip);
             const UINT swpf = SWP_FRAMECHANGED | SWP_NOACTIVATE;
             const bool wasSync = testFlag(SynchronousGeometryChangeEvent);
             setFlag(SynchronousGeometryChangeEvent);
             SetWindowPos(m_data.hwnd, HWND_TOP, r.left(), r.top(), r.width(), r.height(), swpf);
             if (!wasSync)
                 clearFlag(SynchronousGeometryChangeEvent);
-            QWindowSystemInterface::handleGeometryChange(window(), r);
+            QWindowSystemInterface::handleGeometryChange(window(), rDip);
             QWindowSystemInterface::flushWindowSystemEvents();
         } else if (newState != Qt::WindowMinimized) {
             // Restore saved state.
@@ -1765,7 +1776,7 @@ void QWindowsWindow::propagateSizeHints()
     qCDebug(lcQpaWindows) << __FUNCTION__ << this << window();
 }
 
-QMargins QWindowsWindow::frameMargins() const
+QMargins QWindowsWindow::frameMarginsDp() const
 {
     // Frames are invalidated by style changes (window state, flags).
     // As they are also required for geometry calculations in resize
@@ -1807,17 +1818,17 @@ static inline void addRectToWinRegion(const QRect &rect, HRGN *winRegion)
     }
 }
 
-static HRGN qRegionToWinRegion(const QRegion &region)
+static HRGN qRegionToWinRegion(const QRegion &regionDip)
 {
-    const QVector<QRect> rects = region.rects();
+    const QVector<QRect> rects = regionDip.rects();
     if (rects.isEmpty())
         return NULL;
     const int rectCount = rects.size();
     if (rectCount == 1)
-        return createRectRegion(region.boundingRect());
-    HRGN hRegion = createRectRegion(rects.front());
+        return createRectRegion(QWindowsScaling::mapToNative(regionDip.boundingRect()));
+    HRGN hRegion = createRectRegion(QWindowsScaling::mapToNative(rects.front()));
     for (int i = 1; i < rectCount; ++i)
-        addRectToWinRegion(rects.at(i), &hRegion);
+        addRectToWinRegion(QWindowsScaling::mapToNative(rects.at(i)), &hRegion);
     return hRegion;
 }
 
@@ -1831,7 +1842,7 @@ void QWindowsWindow::setMask(const QRegion &region)
 
     // Mask is in client area coordinates, so offset it in case we have a frame
     if (window()->isTopLevel()) {
-        const QMargins margins = frameMargins();
+        const QMargins margins = frameMarginsDp();
         OffsetRgn(winRegion, margins.left(), margins.top());
     }
 
@@ -1939,7 +1950,7 @@ void QWindowsWindow::getSizeHints(MINMAXINFO *mmi) const
             && (m_data.flags & Qt::FramelessWindowHint)) {
         // This block fixes QTBUG-8361: Frameless windows shouldn't cover the
         // taskbar when maximized
-        const QScreen *screen = effectiveScreen(window());
+        const QScreen *screen = window()->screen();
 
         // Documentation of MINMAXINFO states that it will only work for the primary screen
         if (screen && screen == QGuiApplication::primaryScreen()) {
@@ -1968,23 +1979,23 @@ bool QWindowsWindow::handleNonClientHitTest(const QPoint &globalPos, LRESULT *re
         || (m_data.flags & Qt::FramelessWindowHint)) {
         return false;
     }
-    const QSize minimumSize = w->minimumSize();
+    const QSize minimumSize = QWindowsScaling::mapToNativeConstrained(w->minimumSize());
     if (minimumSize.isEmpty())
         return false;
-    const QSize maximumSize = w->maximumSize();
+    const QSize maximumSize = QWindowsScaling::mapToNativeConstrained(w->maximumSize());
     const bool fixedWidth = minimumSize.width() == maximumSize.width();
     const bool fixedHeight = minimumSize.height() == maximumSize.height();
     if (!fixedWidth && !fixedHeight)
         return false;
-    const QPoint localPos = w->mapFromGlobal(globalPos);
-    const QSize size = w->size();
+    const QPoint localPos = mapFromGlobalDp(globalPos);
+    const QSize size = w->size() * QWindowsScaling::factor();
     if (fixedHeight) {
         if (localPos.y() >= size.height()) {
             *result = HTBORDER; // Unspecified border, no resize cursor.
             return true;
         }
         if (localPos.y() < 0) {
-            const QMargins margins = frameMargins();
+            const QMargins margins = frameMarginsDp();
             const int topResizeBarPos = margins.left() - margins.top();
             if (localPos.y() < topResizeBarPos) {
                 *result = HTCAPTION; // Extend caption over top resize bar, let's user move the window.
@@ -2065,26 +2076,6 @@ void QWindowsWindow::setCursor(const QWindowsWindowCursor &c)
 #endif
 }
 
-/*!
-    \brief Find a child window using flags from  ChildWindowFromPointEx.
-*/
-
-QWindowsWindow *QWindowsWindow::childAtScreenPoint(const QPoint &screenPoint,
-                                                           unsigned cwexflags) const
-{
-    if (m_data.hwnd)
-        return QWindowsContext::instance()->findPlatformWindowAt(m_data.hwnd, screenPoint, cwexflags);
-    return 0;
-}
-
-QWindowsWindow *QWindowsWindow::childAt(const QPoint &clientPoint, unsigned cwexflags) const
-{
-    if (m_data.hwnd)
-        return childAtScreenPoint(QWindowsGeometryHint::mapToGlobal(m_data.hwnd, clientPoint),
-                                  cwexflags);
-    return 0;
-}
-
 #ifndef Q_OS_WINCE
 void QWindowsWindow::setAlertState(bool enabled)
 {
@@ -2144,23 +2135,6 @@ void QWindowsWindow::setEnabled(bool enabled)
         setStyle(newStyle);
 }
 
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-EGLSurface QWindowsWindow::ensureEglSurfaceHandle(const QWindowsWindow::QWindowsEGLStaticContextPtr &staticContext, EGLConfig config)
-{
-    if (!m_eglSurface) {
-        m_staticEglContext = staticContext;
-        m_eglSurface = eglCreateWindowSurface(staticContext->display(), config, (EGLNativeWindowType)m_data.hwnd, NULL);
-        if (m_eglSurface == EGL_NO_SURFACE)
-            qWarning("%s: Could not create the egl surface for %s/'%s' (eglCreateWindowSurface failed): error = 0x%x\n",
-                     Q_FUNC_INFO, window()->metaObject()->className(),
-                     qPrintable(window()->objectName()), eglGetError());
-
-            qCDebug(lcQpaGl) << __FUNCTION__<<"Created EGL surface "<< m_eglSurface <<window();
-    }
-    return m_eglSurface;
-}
-#endif // QT_OPENGL_ES_2
-
 QByteArray QWindowsWindow::debugWindowFlags(Qt::WindowFlags wf)
 {
     const int iwf = int(wf);
@@ -2253,6 +2227,10 @@ void QWindowsWindow::setWindowIcon(const QIcon &icon)
     The property can be set using QPlatformNativeInterface::setWindowProperty() or,
     before platform window creation, by setting a dynamic property
     on the QWindow (see QWindowsIntegration::createPlatformWindow()).
+
+    Note: The function uses (unscaled) device pixels since the QWizard also
+    uses AdjustWindowRect() and using device independent pixels would introduce
+    rounding errors.
 */
 
 void QWindowsWindow::setCustomMargins(const QMargins &newCustomMargins)
@@ -2272,4 +2250,16 @@ void QWindowsWindow::setCustomMargins(const QMargins &newCustomMargins)
     }
 }
 
+void *QWindowsWindow::surface(void *nativeConfig)
+{
+#ifdef QT_NO_OPENGL
+    return 0;
+#else
+    if (!m_surface)
+        m_surface = m_data.staticOpenGLContext->createWindowSurface(m_data.hwnd, nativeConfig);
+
+    return m_surface;
+#endif
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/windows/qwindowswindow.h b/src/plugins/platforms/windows/qwindowswindow.h
index cb437b76d0..71debf2476 100644
--- a/src/plugins/platforms/windows/qwindowswindow.h
+++ b/src/plugins/platforms/windows/qwindowswindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,24 +38,17 @@
 #ifdef Q_OS_WINCE
 #  include "qplatformfunctions_wince.h"
 #endif
+#include "qwindowsscaling.h"
 #include "qwindowscursor.h"
+#include "qwindowsopenglcontext.h"
 
 #include <qpa/qplatformwindow.h>
 
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-#  include <QtCore/QSharedPointer>
-#  include <EGL/egl.h>
-#endif
-
 QT_BEGIN_NAMESPACE
 
 class QWindowsOleDropTarget;
 class QDebug;
 
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-class QWindowsEGLStaticContext;
-#endif
-
 struct QWindowsGeometryHint
 {
     QWindowsGeometryHint() {}
@@ -121,6 +106,9 @@ struct QWindowsWindowData
     QMargins customMargins; // User-defined, additional frame for NCCALCSIZE
     HWND hwnd;
     bool embedded;
+#ifndef QT_NO_OPENGL
+    QSharedPointer<QWindowsStaticOpenGLContext> staticOpenGLContext;
+#endif // QT_NO_OPENGL
 
     static QWindowsWindowData create(const QWindow *w,
                                      const QWindowsWindowData &parameters,
@@ -130,10 +118,6 @@ struct QWindowsWindowData
 class QWindowsWindow : public QPlatformWindow
 {
 public:
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    typedef QSharedPointer<QWindowsEGLStaticContext> QWindowsEGLStaticContextPtr;
-#endif
-
     enum Flags
     {
         AutoMouseCapture = 0x1, //! Automatic mouse capture on button press.
@@ -160,46 +144,57 @@ public:
     QWindowsWindow(QWindow *window, const QWindowsWindowData &data);
     ~QWindowsWindow();
 
-    virtual QSurfaceFormat format() const { return m_format; }
-    virtual void setGeometry(const QRect &rect);
-    virtual QRect geometry() const { return m_data.geometry; }
-    QRect normalGeometry() const Q_DECL_OVERRIDE;
-
-    virtual void setVisible(bool visible);
+    QSurfaceFormat format() const Q_DECL_OVERRIDE { return m_format; }
+    void setGeometryDp(const QRect &rectIn);
+    void setGeometry(const QRect &rect) Q_DECL_OVERRIDE
+        { setGeometryDp(QWindowsScaling::mapToNative(rect)); }
+    QRect geometryDp() const { return m_data.geometry; }
+    QRect geometry() const Q_DECL_OVERRIDE
+        { return QWindowsScaling::mapFromNative(geometryDp()); }
+    QRect normalGeometryDp() const;
+    QRect normalGeometry() const Q_DECL_OVERRIDE
+        { return QWindowsScaling::mapFromNative(normalGeometryDp()); }
+    qreal devicePixelRatio() const Q_DECL_OVERRIDE
+        { return qreal(QWindowsScaling::factor()); }
+    void setVisible(bool visible) Q_DECL_OVERRIDE;
     bool isVisible() const;
-    virtual bool isExposed() const { return testFlag(Exposed); }
-    virtual bool isActive() const;
-    virtual bool isEmbedded(const QPlatformWindow *parentWindow) const;
-    virtual QPoint mapToGlobal(const QPoint &pos) const;
-    virtual QPoint mapFromGlobal(const QPoint &pos) const;
-
-    virtual void setWindowFlags(Qt::WindowFlags flags);
-    virtual void setWindowState(Qt::WindowState state);
+    bool isExposed() const Q_DECL_OVERRIDE { return testFlag(Exposed); }
+    bool isActive() const Q_DECL_OVERRIDE;
+    bool isEmbedded(const QPlatformWindow *parentWindow) const Q_DECL_OVERRIDE;
+    QPoint mapToGlobalDp(const QPoint &pos) const;
+    QPoint mapToGlobal(const QPoint &pos) const Q_DECL_OVERRIDE
+        { return mapToGlobalDp(pos * QWindowsScaling::factor()) / QWindowsScaling::factor(); }
+    QPoint mapFromGlobalDp(const QPoint &pos) const;
+    QPoint mapFromGlobal(const QPoint &pos) const Q_DECL_OVERRIDE
+        { return mapFromGlobalDp(pos * QWindowsScaling::factor()) / QWindowsScaling::factor(); }
+    void setWindowFlags(Qt::WindowFlags flags) Q_DECL_OVERRIDE;
+    void setWindowState(Qt::WindowState state) Q_DECL_OVERRIDE;
 
     HWND handle() const { return m_data.hwnd; }
 
-    virtual WId winId() const { return WId(m_data.hwnd); }
-    virtual void setParent(const QPlatformWindow *window);
+    WId winId() const Q_DECL_OVERRIDE { return WId(m_data.hwnd); }
+    void setParent(const QPlatformWindow *window) Q_DECL_OVERRIDE;
 
-    virtual void setWindowTitle(const QString &title);
-    virtual void raise();
-    virtual void lower();
+    void setWindowTitle(const QString &title) Q_DECL_OVERRIDE;
+    void raise() Q_DECL_OVERRIDE;
+    void lower() Q_DECL_OVERRIDE;
 
     void windowEvent(QEvent *event);
 
-    virtual void propagateSizeHints();
-    virtual QMargins frameMargins() const;
+    void propagateSizeHints() Q_DECL_OVERRIDE;
+    QMargins frameMarginsDp() const;
+    QMargins frameMargins() const Q_DECL_OVERRIDE { return frameMarginsDp() / QWindowsScaling::factor(); }
 
-    virtual void setOpacity(qreal level);
-    virtual void setMask(const QRegion &region);
+    void setOpacity(qreal level) Q_DECL_OVERRIDE;
+    void setMask(const QRegion &region) Q_DECL_OVERRIDE;
     qreal opacity() const { return m_opacity; }
-    virtual void requestActivateWindow();
+    void requestActivateWindow() Q_DECL_OVERRIDE;
 
-    virtual bool setKeyboardGrabEnabled(bool grab);
-    virtual bool setMouseGrabEnabled(bool grab);
+    bool setKeyboardGrabEnabled(bool grab) Q_DECL_OVERRIDE;
+    bool setMouseGrabEnabled(bool grab) Q_DECL_OVERRIDE;
     inline bool hasMouseCapture() const { return GetCapture() == m_data.hwnd; }
 
-    virtual bool startSystemResize(const QPoint &pos, Qt::Corner corner);
+    bool startSystemResize(const QPoint &, Qt::Corner corner) Q_DECL_OVERRIDE;
 
     void setFrameStrutEventsEnabled(bool enabled);
     bool frameStrutEventsEnabled() const { return testFlag(FrameStrutEventsEnabled); }
@@ -207,11 +202,6 @@ public:
     QMargins customMargins() const { return m_data.customMargins; }
     void setCustomMargins(const QMargins &m);
 
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    EGLSurface eglSurfaceHandle() const { return m_eglSurface;}
-    EGLSurface ensureEglSurfaceHandle(const QWindowsEGLStaticContextPtr &staticContext, EGLConfig config);
-#endif
-
     inline unsigned style() const
         { return GetWindowLongPtr(m_data.hwnd, GWL_STYLE); }
     void setStyle(unsigned s) const;
@@ -248,11 +238,6 @@ public:
     void setCursor(const QWindowsWindowCursor &c);
     void applyCursor();
 
-    QWindowsWindow *childAt(const QPoint &clientPoint,
-                                unsigned cwexflags = CWP_SKIPINVISIBLE) const;
-    QWindowsWindow *childAtScreenPoint(const QPoint &screenPoint,
-                                           unsigned cwexflags = CWP_SKIPINVISIBLE) const;
-
     static QByteArray debugWindowFlags(Qt::WindowFlags wf);
 
     inline bool testFlag(unsigned f) const  { return (m_flags & f) != 0; }
@@ -263,6 +248,8 @@ public:
     bool isEnabled() const;
     void setWindowIcon(const QIcon &icon);
 
+    void *surface(void *nativeConfig);
+
 #ifndef Q_OS_WINCE
     void setAlertState(bool enabled);
     bool isAlertState() const { return testFlag(AlertState); }
@@ -302,15 +289,12 @@ private:
     unsigned m_savedStyle;
     QRect m_savedFrameGeometry;
     const QSurfaceFormat m_format;
-#if defined(QT_OPENGL_ES_2) || defined(QT_OPENGL_DYNAMIC)
-    EGLSurface m_eglSurface;
-    QSharedPointer<QWindowsEGLStaticContext> m_staticEglContext;
-#endif
 #ifdef Q_OS_WINCE
     bool m_previouslyHidden;
 #endif
     HICON m_iconSmall;
     HICON m_iconBig;
+    void *m_surface;
 };
 
 // Debug
diff --git a/src/plugins/platforms/windows/windows.pri b/src/plugins/platforms/windows/windows.pri
index 13799ba1ba..8e5f35d293 100644
--- a/src/plugins/platforms/windows/windows.pri
+++ b/src/plugins/platforms/windows/windows.pri
@@ -39,7 +39,8 @@ SOURCES += \
     $$PWD/qwindowsdialoghelpers.cpp \
     $$PWD/qwindowsservices.cpp \
     $$PWD/qwindowsnativeimage.cpp \
-    $$PWD/qwindowsnativeinterface.cpp
+    $$PWD/qwindowsnativeinterface.cpp \
+    $$PWD/qwindowsscaling.cpp
 
 HEADERS += \
     $$PWD/qwindowswindow.h \
@@ -64,10 +65,15 @@ HEADERS += \
     $$PWD/qwindowsservices.h \
     $$PWD/qplatformfunctions_wince.h \
     $$PWD/qwindowsnativeimage.h \
-    $$PWD/qwindowsnativeinterface.h
+    $$PWD/qwindowsnativeinterface.h \
+    $$PWD/qwindowsscaling.h
+
+!wince: HEADERS += $$PWD/qwindowsopengltester.h
 
 INCLUDEPATH += $$PWD
 
+contains(QT_CONFIG,opengl): HEADERS += $$PWD/qwindowsopenglcontext.h
+
 contains(QT_CONFIG, opengles2) {
     SOURCES += $$PWD/qwindowseglcontext.cpp
     HEADERS += $$PWD/qwindowseglcontext.h
@@ -78,7 +84,8 @@ contains(QT_CONFIG, opengles2) {
 
 # Dynamic GL needs both WGL and EGL
 contains(QT_CONFIG,dynamicgl) {
-    SOURCES += $$PWD/qwindowseglcontext.cpp
+    SOURCES += $$PWD/qwindowseglcontext.cpp \
+               $$PWD/qwindowsopengltester.cpp
     HEADERS += $$PWD/qwindowseglcontext.h
 }
 
@@ -108,6 +115,10 @@ contains(QT_CONFIG,dynamicgl) {
     HEADERS += $$PWD/qwindowssessionmanager.h
 }
 
+!wince*:!contains( DEFINES, QT_NO_IMAGEFORMAT_PNG ) {
+    RESOURCES += $$PWD/cursors.qrc
+}
+
 contains(QT_CONFIG, freetype) {
     DEFINES *= QT_NO_FONTCONFIG
     QT_FREETYPE_DIR = $$QT_SOURCE_TREE/src/3rdparty/freetype
diff --git a/src/plugins/platforms/winrt/blit.hlsl b/src/plugins/platforms/winrt/blit.hlsl
deleted file mode 100644
index 170e7f40ca..0000000000
--- a/src/plugins/platforms/winrt/blit.hlsl
+++ /dev/null
@@ -1,14 +0,0 @@
-uniform SamplerState Sampler : register(s0);
-uniform Texture2D Texture : register(t0);
-
-void blitvs(in float4 pos0 : TEXCOORD0, in float2 tex0 : TEXCOORD1,
-            out float4 gl_Position : SV_POSITION, out float2 coord : TEXCOORD0)
-{
-    coord = tex0;
-    gl_Position = pos0 * float4(1.0, -1.0, 1.0, 1.0);
-}
-
-float4 blitps(in float4 gl_Position : SV_POSITION, in float2 coord : TEXCOORD0) : SV_TARGET0
-{
-    return Texture.Sample(Sampler, coord);
-}
diff --git a/src/plugins/platforms/winrt/main.cpp b/src/plugins/platforms/winrt/main.cpp
index 89d560dbe3..a069ea980b 100644
--- a/src/plugins/platforms/winrt/main.cpp
+++ b/src/plugins/platforms/winrt/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtbackingstore.cpp b/src/plugins/platforms/winrt/qwinrtbackingstore.cpp
index b8418eef6a..3e6a079b9f 100644
--- a/src/plugins/platforms/winrt/qwinrtbackingstore.cpp
+++ b/src/plugins/platforms/winrt/qwinrtbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,343 +37,136 @@
 #include "qwinrtwindow.h"
 #include "qwinrteglcontext.h"
 #include <QtGui/QOpenGLContext>
+#include <QtGui/QOpenGLFramebufferObject>
 
-#include <GLES2/gl2.h>
-#include <GLES2/gl2ext.h>
-
-// Generated shader headers
-#include "blitps.h"
-#include "blitvs.h"
-
-namespace { // Utility namespace for writing out an ANGLE-compatible binary blob
-
-// Must match packaged ANGLE
-enum : quint32 {
-    AngleMajorVersion = 1,
-    AngleMinorVersion = 3
-};
-
-struct ShaderString
-{
-    ShaderString(const char *data = 0) : data(data) { }
-    const char *data;
-};
-
-// ANGLE stream compatibility - when size_t is 32-bit, QDataStream::writeBytes() also works
-QDataStream &operator<<(QDataStream &stream, const ShaderString &shaderString)
-{
-    if (!shaderString.data)
-        return stream << size_t(0);
+#include <GLES3/gl3.h>
+#include <GLES3/gl3ext.h>
 
-    size_t len = strlen(shaderString.data);
-    stream << len;
-    stream.writeRawData(shaderString.data, int(len));
-    return stream;
-}
-
-struct Attribute
-{
-    Attribute(GLenum type = 0, const char *name = 0, quint32 index = 0)
-        : type(type), name(name), index(index) { }
-    GLenum type;
-    ShaderString name;
-    quint32 index;
-};
-
-struct Sampler
-{
-    enum TextureType { Texture2D, TextureCube };
-    Sampler(bool active = false, GLint unit = 0, TextureType type = Texture2D)
-        : active(active), unit(unit), type(type) { }
-    bool active;
-    GLint unit;
-    TextureType type;
-};
-
-struct Uniform
-{
-    Uniform() { }
-    Uniform(GLenum type, quint32 precision, const char *name, quint32 arraySize,
-            quint32 psRegisterIndex, quint32 vsRegisterIndex, quint32 registerCount)
-        : type(type), precision(precision), name(name), arraySize(arraySize)
-        , psRegisterIndex(psRegisterIndex), vsRegisterIndex(vsRegisterIndex), registerCount(registerCount) { }
-    GLenum type;
-    quint32 precision;
-    ShaderString name;
-    quint32 arraySize;
-    quint32 psRegisterIndex;
-    quint32 vsRegisterIndex;
-    quint32 registerCount;
-};
+QT_BEGIN_NAMESPACE
 
-struct UniformIndex
+class QWinRTBackingStorePrivate
 {
-    UniformIndex(const char *name = 0, quint32 element = 0, quint32 index = 0)
-        : name(name), element(element), index(index) { }
-    ShaderString name;
-    quint32 element;
-    quint32 index;
+public:
+    bool initialized;
+    QSize size;
+    QScopedPointer<QOpenGLContext> context;
+    QScopedPointer<QOpenGLFramebufferObject> fbo;
+    QWinRTScreen *screen;
+    QImage paintDevice;
 };
 
-static const QByteArray createAngleBinary(
-        const QVector<Attribute> &attributes,
-        const QVector<Sampler> &textureSamplers,
-        const QVector<Sampler> &vertexSamplers,
-        const QVector<Uniform> &uniforms,
-        const QVector<UniformIndex> &uniformIndex,
-        const QByteArray &pixelShader,
-        const QByteArray &vertexShader,
-        const QByteArray &geometryShader = QByteArray(),
-        bool usesPointSize = false)
+QWinRTBackingStore::QWinRTBackingStore(QWindow *window)
+    : QPlatformBackingStore(window), d_ptr(new QWinRTBackingStorePrivate)
 {
-    QByteArray binary;
-
-    QDataStream stream(&binary, QIODevice::WriteOnly);
-    stream.setByteOrder(QDataStream::LittleEndian);
-
-    stream << quint32(GL_PROGRAM_BINARY_ANGLE)
-           << qint32(AngleMajorVersion)
-           << qint32(AngleMinorVersion);
-
-    // Vertex attributes
-    for (int i = 0; i < 16; ++i) {
-        if (i < attributes.size())
-            stream << quint32(attributes[i].type) << attributes[i].name << attributes[i].index;
-        else
-            stream << quint32(GL_NONE) << ShaderString() << qint32(-1);
-    }
-
-    // Texture units
-    for (int i = 0; i < 16; ++i) {
-        if (i < textureSamplers.size())
-            stream << textureSamplers[i].active << textureSamplers[i].unit << qint32(textureSamplers[i].type);
-        else
-            stream << false << qint32(0) << qint32(Sampler::Texture2D);
-    }
-
-    // Vertex texture units
-    for (int i = 0; i < 16; ++i) {
-        if (i < vertexSamplers.size())
-            stream << vertexSamplers[i].active << vertexSamplers[i].unit << qint32(vertexSamplers[i].type);
-        else
-            stream << false << qint32(0) << qint32(Sampler::Texture2D);
-    }
-
-    stream << vertexSamplers.size()
-           << textureSamplers.size()
-           << usesPointSize;
-
-    stream << size_t(uniforms.size());
-    foreach (const Uniform &uniform, uniforms) {
-        stream << uniform.type << uniform.precision << uniform.name << uniform.arraySize
-               << uniform.psRegisterIndex << uniform.vsRegisterIndex << uniform.registerCount;
-    }
-
-    stream << size_t(uniformIndex.size());
-    foreach (const UniformIndex &index, uniformIndex)
-        stream << index.name << index.element << index.index;
-
-    stream << quint32(pixelShader.size())
-           << quint32(vertexShader.size())
-           << quint32(geometryShader.size());
-
-    stream.writeRawData(pixelShader.constData(), pixelShader.size());
-    stream.writeRawData(vertexShader.constData(), vertexShader.size());
-    if (!geometryShader.isEmpty())
-        stream.writeRawData(geometryShader.constData(), geometryShader.size());
-
-    return binary;
-}
-
-} // namespace
-
-QT_BEGIN_NAMESPACE
+    Q_D(QWinRTBackingStore);
 
-static const GLfloat normCoords[] = { -1, 1, 1, 1, 1, -1, -1, -1 };
-static const GLfloat quadCoords[] = { 0, 0, 1, 0, 1, 1, 0, 1 };
+    d->initialized = false;
+    d->screen = static_cast<QWinRTScreen*>(window->screen()->handle());
 
-QWinRTBackingStore::QWinRTBackingStore(QWindow *window)
-    : QPlatformBackingStore(window)
-    , m_context(new QOpenGLContext)
-    , m_shaderProgram(0)
-    , m_fbo(0)
-    , m_texture(0)
-    , m_screen(static_cast<QWinRTScreen*>(window->screen()->handle()))
-    , m_initialized(false)
-{
     window->setSurfaceType(QSurface::OpenGLSurface); // Required for flipping, but could be done in the swap
 }
 
 bool QWinRTBackingStore::initialize()
 {
-    if (m_initialized)
+    Q_D(QWinRTBackingStore);
+
+    if (d->initialized)
         return true;
 
-    m_context->setFormat(window()->requestedFormat());
-    m_context->setScreen(window()->screen());
-    if (!m_context->create())
+    d->context.reset(new QOpenGLContext);
+    QSurfaceFormat format = window()->requestedFormat();
+    format.setVersion(3, 0); // Required for ES3 framebuffer blit
+    d->context->setFormat(format);
+    d->context->setScreen(window()->screen());
+    if (!d->context->create())
         return false;
 
-    if (!m_context->makeCurrent(window()))
+    if (!d->context->makeCurrent(window()))
         return false;
 
-    glGenFramebuffers(1, &m_fbo);
-    glGenRenderbuffers(1, &m_rbo);
-    glGenTextures(1, &m_texture);
-    m_shaderProgram = glCreateProgram();
-
-#if 0 // Standard GLES passthrough shader program
-    static const char *vertexShaderSource =
-            "attribute vec4 pos0;\n"
-            "attribute vec2 tex0;\n"
-            "varying vec2 coord;\n"
-            "void main() {\n"
-            "   coord = tex0;\n"
-            "   gl_Position = pos0;\n"
-            "}\n";
-    static const char *fragmentShaderSource =
-            "uniform sampler2D texture;\n"
-            "varying highp vec2 coord;\n"
-            "void main() {\n"
-            "   gl_FragColor = texture2D(texture, coord);\n"
-            "}\n";
-    GLuint vertexShader = glCreateShader(GL_VERTEX_SHADER);
-    glShaderSource(vertexShader, 1, &vertexShaderSource, NULL);
-    glCompileShader(vertexShader);
-    GLuint fragmentShader = glCreateShader(GL_FRAGMENT_SHADER);
-    glShaderSource(fragmentShader, 1, &fragmentShaderSource, NULL);
-    glCompileShader(fragmentShader);
-    glAttachShader(m_shaderProgram, vertexShader);
-    glAttachShader(m_shaderProgram, fragmentShader);
-    glLinkProgram(m_shaderProgram);
-#else // Precompiled passthrough shader
-    QVector<Attribute> attributes = QVector<Attribute>() << Attribute(GL_FLOAT_VEC4, "pos0", 0)
-                                                         << Attribute(GL_FLOAT_VEC2, "tex0", 1);
-    QVector<Sampler> textureSamplers = QVector<Sampler>() << Sampler(true, 0, Sampler::Texture2D);
-    QVector<Sampler> vertexSamplers;
-    QVector<Uniform> uniforms = QVector<Uniform>() << Uniform(GL_SAMPLER_2D, 0, "texture", 0, 0, -1, 1);
-    QVector<UniformIndex> uniformsIndex = QVector<UniformIndex>() << UniformIndex("texture", 0, 0);
-    QByteArray pixelShader(reinterpret_cast<const char *>(q_blitps), sizeof(q_blitps));
-    QByteArray vertexShader(reinterpret_cast<const char *>(q_blitvs), sizeof(q_blitvs));
-    QByteArray binary = createAngleBinary(attributes, textureSamplers, vertexSamplers,
-                                          uniforms, uniformsIndex, pixelShader, vertexShader);
-    glProgramBinaryOES(m_shaderProgram, GL_PROGRAM_BINARY_ANGLE, binary.constData(), binary.size());
-#endif
-    m_context->doneCurrent();
-    m_initialized = true;
+    d->context->doneCurrent();
+    d->initialized = true;
     return true;
 }
 
 QWinRTBackingStore::~QWinRTBackingStore()
 {
-    if (!m_initialized)
-        return;
-    glDeleteBuffers(1, &m_fbo);
-    glDeleteRenderbuffers(1, &m_rbo);
-    glDeleteTextures(1, &m_texture);
-    glDeleteProgram(m_shaderProgram);
 }
 
 QPaintDevice *QWinRTBackingStore::paintDevice()
 {
-    return &m_paintDevice;
+    Q_D(QWinRTBackingStore);
+    return &d->paintDevice;
 }
 
 void QWinRTBackingStore::flush(QWindow *window, const QRegion &region, const QPoint &offset)
 {
+    Q_D(QWinRTBackingStore);
     Q_UNUSED(offset)
-    if (m_size.isEmpty())
+
+    if (d->size.isEmpty())
         return;
 
-    m_context->makeCurrent(window);
-
-    // Blitting the entire image width trades zero image copy/relayout for a larger texture upload.
-    // Since we're blitting the whole width anyway, the boundingRect() is used in the assumption that
-    // we don't repeat upload. This is of course dependent on the distance between update regions.
-    // Ideally, we would use the GL_EXT_unpack_subimage extension, which should be possible to implement
-    // since D3D11_MAPPED_SUBRESOURCE supports RowPitch (see below).
-    // Note that single-line blits in a loop are *very* slow, so reducing calls to glTexSubImage2D
-    // is probably a good idea anyway.
-    glBindTexture(GL_TEXTURE_2D, m_texture);
-    QRect bounds = region.boundingRect();
-    glTexSubImage2D(GL_TEXTURE_2D, 0, 0, bounds.y(), m_size.width(), bounds.height(),
-                    GL_BGRA_EXT, GL_UNSIGNED_BYTE, m_paintDevice.constScanLine(bounds.y()));
-    // TODO: Implement GL_EXT_unpack_subimage in ANGLE for more minimal uploads
-    //glPixelStorei(GL_UNPACK_ROW_LENGTH, image->bytesPerLine());
-    //glTexSubImage2D(GL_TEXTURE_2D, 0, bounds.x(), bounds.y(), bounds.width(), bounds.height(),
-    //                GL_BGRA_EXT, GL_UNSIGNED_BYTE, image->scanLine(bounds.y()) + bounds.x() * 4);
-
-    // Bind render buffer
-    glBindFramebuffer(GL_FRAMEBUFFER, m_fbo);
-    glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_RENDERBUFFER, m_rbo);
-
-    // Bind position
-    glUseProgram(m_shaderProgram);
-    glEnableVertexAttribArray(0);
-    glVertexAttribPointer(0, 2, GL_FLOAT, GL_FALSE, 0, normCoords);
-    glEnableVertexAttribArray(1);
-    glVertexAttribPointer(1, 2, GL_FLOAT, GL_FALSE, 0, quadCoords);
-
-    // Render
-    const QSize blitSize = m_size * window->devicePixelRatio();
-    glViewport(0, 0, blitSize.width(), blitSize.height());
-    glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
-
-    // Unbind
-    glDisableVertexAttribArray(0);
-    glDisableVertexAttribArray(1);
-    glUseProgram(0);
-    glBindFramebuffer(GL_FRAMEBUFFER, 0);
-    glBindTexture(GL_TEXTURE_2D, 0);
+    const bool ok = d->context->makeCurrent(window);
+    if (!ok)
+        qWarning("unable to flush");
 
-    // fast blit - TODO: perform the blit inside swap buffers instead
-    glBindFramebuffer(GL_READ_FRAMEBUFFER_ANGLE, m_fbo);
-    glBindFramebuffer(GL_DRAW_FRAMEBUFFER_ANGLE, 0);
-    glBlitFramebufferANGLE(0, 0, blitSize.width(), blitSize.height(), // TODO: blit only the changed rectangle
-                           0, 0, blitSize.width(), blitSize.height(),
-                           GL_COLOR_BUFFER_BIT, GL_NEAREST);
+    const QRect bounds = region.boundingRect();
+    glBindTexture(GL_TEXTURE_2D, d->fbo->texture());
+    // TODO: when ANGLE GLES3 support is finished, use the glPixelStorei functions to minimize upload
+    glTexSubImage2D(GL_TEXTURE_2D, 0, 0, bounds.y(), d->size.width(), bounds.height(),
+                    GL_RGBA, GL_UNSIGNED_BYTE, d->paintDevice.constScanLine(bounds.y()));
+    glBindTexture(GL_TEXTURE_2D, 0);
 
-    m_context->swapBuffers(window);
-    m_context->doneCurrent();
+    glBindFramebuffer(GL_READ_FRAMEBUFFER, d->fbo->handle());
+    glBindFramebuffer(GL_DRAW_FRAMEBUFFER, 0);
+    const int y1 = bounds.y();
+    const int y2 = y1 + bounds.height();
+    const int x1 = bounds.x();
+    const int x2 = x1 + bounds.width();
+    glBlitFramebuffer(x1, y1, x2, y2,
+                      x1, d->size.height() - y1, x2, d->size.height() - y2,
+                      GL_COLOR_BUFFER_BIT, GL_NEAREST);
+
+    d->context->swapBuffers(window);
+    d->context->doneCurrent();
 }
 
 void QWinRTBackingStore::resize(const QSize &size, const QRegion &staticContents)
 {
+    Q_D(QWinRTBackingStore);
     Q_UNUSED(staticContents)
+
     if (!initialize())
         return;
 
-    if (m_size == size)
+    if (d->size == size)
         return;
 
-    m_size = size;
-    if (m_size.isEmpty())
+    d->size = size;
+    if (d->size.isEmpty())
         return;
 
-    m_paintDevice = QImage(m_size, QImage::Format_ARGB32_Premultiplied);
-
-    m_context->makeCurrent(window());
-    // Input texture
-    glBindTexture(GL_TEXTURE_2D, m_texture);
-    glTexImage2D(GL_TEXTURE_2D, 0, GL_BGRA_EXT, m_size.width(), m_size.height(),
-                 0, GL_BGRA_EXT, GL_UNSIGNED_BYTE, NULL);
-    glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
-    glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
-    glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
-    glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
-    glBindTexture(GL_TEXTURE_2D, 0);
-    // Render buffer
-    glBindRenderbuffer(GL_RENDERBUFFER, m_rbo);
-    const QSize blitSize = m_size * window()->devicePixelRatio();
-    glRenderbufferStorage(GL_RENDERBUFFER, GL_BGRA8_EXT, blitSize.width(), blitSize.height());
-    glBindRenderbuffer(GL_RENDERBUFFER, 0);
-    m_context->doneCurrent();
+    d->paintDevice = QImage(d->size, QImage::Format_RGBA8888_Premultiplied);
+
+    const bool ok = d->context->makeCurrent(window());
+    if (!ok)
+        qWarning("unable to resize");
+
+    d->fbo.reset(new QOpenGLFramebufferObject(d->size));
+
+    d->context->doneCurrent();
+}
+
+QImage QWinRTBackingStore::toImage() const
+{
+    Q_D(const QWinRTBackingStore);
+    return d->paintDevice;
 }
 
 void QWinRTBackingStore::beginPaint(const QRegion &region)
 {
-    Q_UNUSED(region)
-    resize(window()->size(), QRegion());
+    resize(window()->size(), region);
 }
 
 void QWinRTBackingStore::endPaint()
diff --git a/src/plugins/platforms/winrt/qwinrtbackingstore.h b/src/plugins/platforms/winrt/qwinrtbackingstore.h
index f00fa85a26..920ad6b6ba 100644
--- a/src/plugins/platforms/winrt/qwinrtbackingstore.h
+++ b/src/plugins/platforms/winrt/qwinrtbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,8 +40,8 @@
 QT_BEGIN_NAMESPACE
 
 class QWinRTScreen;
-class QOpenGLContext;
 
+class QWinRTBackingStorePrivate;
 class QWinRTBackingStore : public QPlatformBackingStore
 {
 public:
@@ -60,19 +52,13 @@ public:
     void endPaint();
     void flush(QWindow *window, const QRegion &region, const QPoint &offset);
     void resize(const QSize &size, const QRegion &staticContents);
-    QImage toImage() const Q_DECL_OVERRIDE { return m_paintDevice; }
+    QImage toImage() const Q_DECL_OVERRIDE;
 
 private:
     bool initialize();
-    bool m_initialized;
-    QSize m_size;
-    QScopedPointer<QOpenGLContext> m_context;
-    quint32 m_shaderProgram;
-    quint32 m_fbo;
-    quint32 m_rbo;
-    quint32 m_texture;
-    QWinRTScreen *m_screen;
-    QImage m_paintDevice;
+
+    QScopedPointer<QWinRTBackingStorePrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTBackingStore)
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtcursor.cpp b/src/plugins/platforms/winrt/qwinrtcursor.cpp
index f09454ebc3..24812d1482 100644
--- a/src/plugins/platforms/winrt/qwinrtcursor.cpp
+++ b/src/plugins/platforms/winrt/qwinrtcursor.cpp
@@ -1,79 +1,85 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qwinrtcursor.h"
+#include "qwinrtscreen.h"
+
+#include <QtCore/qfunctions_winrt.h>
+#include <QtGui/QGuiApplication>
+#include <QtGui/QScreen>
 
 #include <wrl.h>
 #include <windows.ui.core.h>
 #include <windows.foundation.h>
+using namespace Microsoft::WRL;
 using namespace Microsoft::WRL::Wrappers;
 using namespace ABI::Windows::UI::Core;
 using namespace ABI::Windows::Foundation;
 
-QT_BEGIN_NAMESPACE
+QT_USE_NAMESPACE
+
+class QWinRTCursorPrivate
+{
+public:
+    ComPtr<ICoreCursorFactory> cursorFactory;
+};
 
-QWinRTCursor::QWinRTCursor(ICoreWindow *window) : m_window(window), m_cursorFactory(nullptr)
+QWinRTCursor::QWinRTCursor()
+  : d_ptr(new QWinRTCursorPrivate)
 {
-#ifndef Q_OS_WINPHONE
-    GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_UI_Core_CoreCursor).Get(), &m_cursorFactory);
-#endif
+    Q_D(QWinRTCursor);
+
+    HRESULT hr;
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_UI_Core_CoreCursor).Get(),
+                                IID_PPV_ARGS(&d->cursorFactory));
+    Q_ASSERT_SUCCEEDED(hr);
 }
 
 QWinRTCursor::~QWinRTCursor()
 {
-    if (m_cursorFactory)
-        m_cursorFactory->Release();
 }
 
 #ifndef QT_NO_CURSOR
-void QWinRTCursor::changeCursor(QCursor *windowCursor, QWindow *)
+void QWinRTCursor::changeCursor(QCursor *windowCursor, QWindow *window)
 {
-#ifndef Q_OS_WINPHONE
-    if (!m_cursorFactory)
-        return;
+    Q_D(QWinRTCursor);
+
+    ICoreWindow *coreWindow = static_cast<QWinRTScreen *>(window->screen()->handle())->coreWindow();
 
     CoreCursorType type;
     switch (windowCursor ? windowCursor->shape() : Qt::ArrowCursor) {
     case Qt::BlankCursor:
-        m_window->put_PointerCursor(nullptr);
+        coreWindow->put_PointerCursor(Q_NULLPTR);
         return;
     default:
     case Qt::OpenHandCursor:
@@ -132,24 +138,20 @@ void QWinRTCursor::changeCursor(QCursor *windowCursor, QWindow *)
         break;
     }
 
-    ICoreCursor *cursor;
-    if (SUCCEEDED(m_cursorFactory->CreateCursor(type, 0, &cursor)))
-        m_window->put_PointerCursor(cursor);
-#else // Q_OS_WINPHONE
-    Q_UNUSED(windowCursor)
-#endif // Q_OS_WINPHONE
+    ComPtr<ICoreCursor> cursor;
+    HRESULT hr = d->cursorFactory->CreateCursor(type, 0, &cursor);
+    RETURN_VOID_IF_FAILED("Failed to create native cursor.");
+
+    hr = coreWindow->put_PointerCursor(cursor.Get());
+    RETURN_VOID_IF_FAILED("Failed to set native cursor.");
 }
 #endif // QT_NO_CURSOR
 
 QPoint QWinRTCursor::pos() const
 {
-#ifdef Q_OS_WINPHONE
-    return QPlatformCursor::pos();
-#else
+    ICoreWindow *coreWindow =
+            static_cast<QWinRTScreen *>(QGuiApplication::primaryScreen()->handle())->coreWindow();
     Point point;
-    m_window->get_PointerPosition(&point);
+    coreWindow->get_PointerPosition(&point);
     return QPoint(point.X, point.Y);
-#endif
 }
-
-QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtcursor.h b/src/plugins/platforms/winrt/qwinrtcursor.h
index f7b301a98b..fb5f0eae26 100644
--- a/src/plugins/platforms/winrt/qwinrtcursor.h
+++ b/src/plugins/platforms/winrt/qwinrtcursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,34 +36,22 @@
 
 #include <qpa/qplatformcursor.h>
 
-namespace ABI {
-    namespace Windows {
-        namespace UI {
-            namespace Core {
-                struct ICoreWindow;
-                struct ICoreCursorFactory;
-            }
-        }
-    }
-}
-
-QT_BEGIN_NAMESPACE
+QT_USE_NAMESPACE
 
+class QWinRTCursorPrivate;
 class QWinRTCursor : public QPlatformCursor
 {
 public:
-    explicit QWinRTCursor(ABI::Windows::UI::Core::ICoreWindow *window);
+    explicit QWinRTCursor();
     ~QWinRTCursor();
 #ifndef QT_NO_CURSOR
-    void changeCursor(QCursor * windowCursor, QWindow *);
+    void changeCursor(QCursor * windowCursor, QWindow *window);
 #endif
     QPoint pos() const;
 
 private:
-    ABI::Windows::UI::Core::ICoreWindow *m_window;
-    ABI::Windows::UI::Core::ICoreCursorFactory *m_cursorFactory;
+    QScopedPointer<QWinRTCursorPrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTCursor)
 };
 
-QT_END_NAMESPACE
-
 #endif // QWINRTCURSOR_H
diff --git a/src/plugins/platforms/winrt/qwinrteglcontext.cpp b/src/plugins/platforms/winrt/qwinrteglcontext.cpp
index 3a1958a20e..5daeee69c0 100644
--- a/src/plugins/platforms/winrt/qwinrteglcontext.cpp
+++ b/src/plugins/platforms/winrt/qwinrteglcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,4 +52,159 @@ EGLSurface QWinRTEGLContext::eglSurfaceForPlatformSurface(QPlatformSurface *surf
     }
 }
 
+QFunctionPointer QWinRTEGLContext::getProcAddress(const QByteArray &procName)
+{
+    static QHash<QByteArray, QFunctionPointer> standardFuncs;
+    if (standardFuncs.isEmpty()) {
+        standardFuncs.insert(QByteArrayLiteral("glBindTexture"), (QFunctionPointer)&glBindTexture);
+        standardFuncs.insert(QByteArrayLiteral("glBlendFunc"), (QFunctionPointer)&glBlendFunc);
+        standardFuncs.insert(QByteArrayLiteral("glClear"), (QFunctionPointer)&glClear);
+        standardFuncs.insert(QByteArrayLiteral("glClearColor"), (QFunctionPointer)&glClearColor);
+        standardFuncs.insert(QByteArrayLiteral("glClearStencil"), (QFunctionPointer)&glClearStencil);
+        standardFuncs.insert(QByteArrayLiteral("glColorMask"), (QFunctionPointer)&glColorMask);
+        standardFuncs.insert(QByteArrayLiteral("glCopyTexImage2D"), (QFunctionPointer)&glCopyTexImage2D);
+        standardFuncs.insert(QByteArrayLiteral("glCopyTexSubImage2D"), (QFunctionPointer)&glCopyTexSubImage2D);
+        standardFuncs.insert(QByteArrayLiteral("glCullFace"), (QFunctionPointer)&glCullFace);
+        standardFuncs.insert(QByteArrayLiteral("glDeleteTextures"), (QFunctionPointer)&glDeleteTextures);
+        standardFuncs.insert(QByteArrayLiteral("glDepthFunc"), (QFunctionPointer)&glDepthFunc);
+        standardFuncs.insert(QByteArrayLiteral("glDepthMask"), (QFunctionPointer)&glDepthMask);
+        standardFuncs.insert(QByteArrayLiteral("glDisable"), (QFunctionPointer)&glDisable);
+        standardFuncs.insert(QByteArrayLiteral("glDrawArrays"), (QFunctionPointer)&glDrawArrays);
+        standardFuncs.insert(QByteArrayLiteral("glDrawElements"), (QFunctionPointer)&glDrawElements);
+        standardFuncs.insert(QByteArrayLiteral("glEnable"), (QFunctionPointer)&glEnable);
+        standardFuncs.insert(QByteArrayLiteral("glFinish"), (QFunctionPointer)&glFinish);
+        standardFuncs.insert(QByteArrayLiteral("glFlush"), (QFunctionPointer)&glFlush);
+        standardFuncs.insert(QByteArrayLiteral("glFrontFace"), (QFunctionPointer)&glFrontFace);
+        standardFuncs.insert(QByteArrayLiteral("glGenTextures"), (QFunctionPointer)&glGenTextures);
+        standardFuncs.insert(QByteArrayLiteral("glGetBooleanv"), (QFunctionPointer)&glGetBooleanv);
+        standardFuncs.insert(QByteArrayLiteral("glGetError"), (QFunctionPointer)&glGetError);
+        standardFuncs.insert(QByteArrayLiteral("glGetFloatv"), (QFunctionPointer)&glGetFloatv);
+        standardFuncs.insert(QByteArrayLiteral("glGetIntegerv"), (QFunctionPointer)&glGetIntegerv);
+        standardFuncs.insert(QByteArrayLiteral("glGetString"), (QFunctionPointer)&glGetString);
+        standardFuncs.insert(QByteArrayLiteral("glGetTexParameterfv"), (QFunctionPointer)&glGetTexParameterfv);
+        standardFuncs.insert(QByteArrayLiteral("glGetTexParameteriv"), (QFunctionPointer)&glGetTexParameteriv);
+        standardFuncs.insert(QByteArrayLiteral("glHint"), (QFunctionPointer)&glHint);
+        standardFuncs.insert(QByteArrayLiteral("glIsEnabled"), (QFunctionPointer)&glIsEnabled);
+        standardFuncs.insert(QByteArrayLiteral("glIsTexture"), (QFunctionPointer)&glIsTexture);
+        standardFuncs.insert(QByteArrayLiteral("glLineWidth"), (QFunctionPointer)&glLineWidth);
+        standardFuncs.insert(QByteArrayLiteral("glPixelStorei"), (QFunctionPointer)&glPixelStorei);
+        standardFuncs.insert(QByteArrayLiteral("glPolygonOffset"), (QFunctionPointer)&glPolygonOffset);
+        standardFuncs.insert(QByteArrayLiteral("glReadPixels"), (QFunctionPointer)&glReadPixels);
+        standardFuncs.insert(QByteArrayLiteral("glScissor"), (QFunctionPointer)&glScissor);
+        standardFuncs.insert(QByteArrayLiteral("glStencilFunc"), (QFunctionPointer)&glStencilFunc);
+        standardFuncs.insert(QByteArrayLiteral("glStencilMask"), (QFunctionPointer)&glStencilMask);
+        standardFuncs.insert(QByteArrayLiteral("glStencilOp"), (QFunctionPointer)&glStencilOp);
+        standardFuncs.insert(QByteArrayLiteral("glTexImage2D"), (QFunctionPointer)&glTexImage2D);
+        standardFuncs.insert(QByteArrayLiteral("glTexParameterf"), (QFunctionPointer)&glTexParameterf);
+        standardFuncs.insert(QByteArrayLiteral("glTexParameterfv"), (QFunctionPointer)&glTexParameterfv);
+        standardFuncs.insert(QByteArrayLiteral("glTexParameteri"), (QFunctionPointer)&glTexParameteri);
+        standardFuncs.insert(QByteArrayLiteral("glTexParameteriv"), (QFunctionPointer)&glTexParameteriv);
+        standardFuncs.insert(QByteArrayLiteral("glTexSubImage2D"), (QFunctionPointer)&glTexSubImage2D);
+        standardFuncs.insert(QByteArrayLiteral("glViewport"), (QFunctionPointer)&glViewport);
+        standardFuncs.insert(QByteArrayLiteral("glActiveTexture"), (QFunctionPointer)&glActiveTexture);
+        standardFuncs.insert(QByteArrayLiteral("glAttachShader"), (QFunctionPointer)&glAttachShader);
+        standardFuncs.insert(QByteArrayLiteral("glBindAttribLocation"), (QFunctionPointer)&glBindAttribLocation);
+        standardFuncs.insert(QByteArrayLiteral("glBindBuffer"), (QFunctionPointer)&glBindBuffer);
+        standardFuncs.insert(QByteArrayLiteral("glBindFramebuffer"), (QFunctionPointer)&glBindFramebuffer);
+        standardFuncs.insert(QByteArrayLiteral("glBindRenderbuffer"), (QFunctionPointer)&glBindRenderbuffer);
+        standardFuncs.insert(QByteArrayLiteral("glBlendColor"), (QFunctionPointer)&glBlendColor);
+        standardFuncs.insert(QByteArrayLiteral("glBlendEquation"), (QFunctionPointer)&glBlendEquation);
+        standardFuncs.insert(QByteArrayLiteral("glBlendEquationSeparate"), (QFunctionPointer)&glBlendEquationSeparate);
+        standardFuncs.insert(QByteArrayLiteral("glBlendFuncSeparate"), (QFunctionPointer)&glBlendFuncSeparate);
+        standardFuncs.insert(QByteArrayLiteral("glBufferData"), (QFunctionPointer)&glBufferData);
+        standardFuncs.insert(QByteArrayLiteral("glBufferSubData"), (QFunctionPointer)&glBufferSubData);
+        standardFuncs.insert(QByteArrayLiteral("glCheckFramebufferStatus"), (QFunctionPointer)&glCheckFramebufferStatus);
+        standardFuncs.insert(QByteArrayLiteral("glCompileShader"), (QFunctionPointer)&glCompileShader);
+        standardFuncs.insert(QByteArrayLiteral("glCompressedTexImage2D"), (QFunctionPointer)&glCompressedTexImage2D);
+        standardFuncs.insert(QByteArrayLiteral("glCompressedTexSubImage2D"), (QFunctionPointer)&glCompressedTexSubImage2D);
+        standardFuncs.insert(QByteArrayLiteral("glCreateProgram"), (QFunctionPointer)&glCreateProgram);
+        standardFuncs.insert(QByteArrayLiteral("glCreateShader"), (QFunctionPointer)&glCreateShader);
+        standardFuncs.insert(QByteArrayLiteral("glDeleteBuffers"), (QFunctionPointer)&glDeleteBuffers);
+        standardFuncs.insert(QByteArrayLiteral("glDeleteFramebuffers"), (QFunctionPointer)&glDeleteFramebuffers);
+        standardFuncs.insert(QByteArrayLiteral("glDeleteProgram"), (QFunctionPointer)&glDeleteProgram);
+        standardFuncs.insert(QByteArrayLiteral("glDeleteRenderbuffers"), (QFunctionPointer)&glDeleteRenderbuffers);
+        standardFuncs.insert(QByteArrayLiteral("glDeleteShader"), (QFunctionPointer)&glDeleteShader);
+        standardFuncs.insert(QByteArrayLiteral("glDetachShader"), (QFunctionPointer)&glDetachShader);
+        standardFuncs.insert(QByteArrayLiteral("glDisableVertexAttribArray"), (QFunctionPointer)&glDisableVertexAttribArray);
+        standardFuncs.insert(QByteArrayLiteral("glEnableVertexAttribArray"), (QFunctionPointer)&glEnableVertexAttribArray);
+        standardFuncs.insert(QByteArrayLiteral("glFramebufferRenderbuffer"), (QFunctionPointer)&glFramebufferRenderbuffer);
+        standardFuncs.insert(QByteArrayLiteral("glFramebufferTexture2D"), (QFunctionPointer)&glFramebufferTexture2D);
+        standardFuncs.insert(QByteArrayLiteral("glGenBuffers"), (QFunctionPointer)&glGenBuffers);
+        standardFuncs.insert(QByteArrayLiteral("glGenerateMipmap"), (QFunctionPointer)&glGenerateMipmap);
+        standardFuncs.insert(QByteArrayLiteral("glGenFramebuffers"), (QFunctionPointer)&glGenFramebuffers);
+        standardFuncs.insert(QByteArrayLiteral("glGenRenderbuffers"), (QFunctionPointer)&glGenRenderbuffers);
+        standardFuncs.insert(QByteArrayLiteral("glGetActiveAttrib"), (QFunctionPointer)&glGetActiveAttrib);
+        standardFuncs.insert(QByteArrayLiteral("glGetActiveUniform"), (QFunctionPointer)&glGetActiveUniform);
+        standardFuncs.insert(QByteArrayLiteral("glGetAttachedShaders"), (QFunctionPointer)&glGetAttachedShaders);
+        standardFuncs.insert(QByteArrayLiteral("glGetAttribLocation"), (QFunctionPointer)&glGetAttribLocation);
+        standardFuncs.insert(QByteArrayLiteral("glGetBufferParameteriv"), (QFunctionPointer)&glGetBufferParameteriv);
+        standardFuncs.insert(QByteArrayLiteral("glGetFramebufferAttachmentParameteriv"), (QFunctionPointer)&glGetFramebufferAttachmentParameteriv);
+        standardFuncs.insert(QByteArrayLiteral("glGetProgramiv"), (QFunctionPointer)&glGetProgramiv);
+        standardFuncs.insert(QByteArrayLiteral("glGetProgramInfoLog"), (QFunctionPointer)&glGetProgramInfoLog);
+        standardFuncs.insert(QByteArrayLiteral("glGetRenderbufferParameteriv"), (QFunctionPointer)&glGetRenderbufferParameteriv);
+        standardFuncs.insert(QByteArrayLiteral("glGetShaderiv"), (QFunctionPointer)&glGetShaderiv);
+        standardFuncs.insert(QByteArrayLiteral("glGetShaderInfoLog"), (QFunctionPointer)&glGetShaderInfoLog);
+        standardFuncs.insert(QByteArrayLiteral("glGetShaderPrecisionFormat"), (QFunctionPointer)&glGetShaderPrecisionFormat);
+        standardFuncs.insert(QByteArrayLiteral("glGetShaderSource"), (QFunctionPointer)&glGetShaderSource);
+        standardFuncs.insert(QByteArrayLiteral("glGetUniformfv"), (QFunctionPointer)&glGetUniformfv);
+        standardFuncs.insert(QByteArrayLiteral("glGetUniformiv"), (QFunctionPointer)&glGetUniformiv);
+        standardFuncs.insert(QByteArrayLiteral("glGetUniformLocation"), (QFunctionPointer)&glGetUniformLocation);
+        standardFuncs.insert(QByteArrayLiteral("glGetVertexAttribfv"), (QFunctionPointer)&glGetVertexAttribfv);
+        standardFuncs.insert(QByteArrayLiteral("glGetVertexAttribiv"), (QFunctionPointer)&glGetVertexAttribiv);
+        standardFuncs.insert(QByteArrayLiteral("glGetVertexAttribPointerv"), (QFunctionPointer)&glGetVertexAttribPointerv);
+        standardFuncs.insert(QByteArrayLiteral("glIsBuffer"), (QFunctionPointer)&glIsBuffer);
+        standardFuncs.insert(QByteArrayLiteral("glIsFramebuffer"), (QFunctionPointer)&glIsFramebuffer);
+        standardFuncs.insert(QByteArrayLiteral("glIsProgram"), (QFunctionPointer)&glIsProgram);
+        standardFuncs.insert(QByteArrayLiteral("glIsRenderbuffer"), (QFunctionPointer)&glIsRenderbuffer);
+        standardFuncs.insert(QByteArrayLiteral("glIsShader"), (QFunctionPointer)&glIsShader);
+        standardFuncs.insert(QByteArrayLiteral("glLinkProgram"), (QFunctionPointer)&glLinkProgram);
+        standardFuncs.insert(QByteArrayLiteral("glReleaseShaderCompiler"), (QFunctionPointer)&glReleaseShaderCompiler);
+        standardFuncs.insert(QByteArrayLiteral("glRenderbufferStorage"), (QFunctionPointer)&glRenderbufferStorage);
+        standardFuncs.insert(QByteArrayLiteral("glSampleCoverage"), (QFunctionPointer)&glSampleCoverage);
+        standardFuncs.insert(QByteArrayLiteral("glShaderBinary"), (QFunctionPointer)&glShaderBinary);
+        standardFuncs.insert(QByteArrayLiteral("glShaderSource"), (QFunctionPointer)&glShaderSource);
+        standardFuncs.insert(QByteArrayLiteral("glStencilFuncSeparate"), (QFunctionPointer)&glStencilFuncSeparate);
+        standardFuncs.insert(QByteArrayLiteral("glStencilMaskSeparate"), (QFunctionPointer)&glStencilMaskSeparate);
+        standardFuncs.insert(QByteArrayLiteral("glStencilOpSeparate"), (QFunctionPointer)&glStencilOpSeparate);
+        standardFuncs.insert(QByteArrayLiteral("glUniform1f"), (QFunctionPointer)&glUniform1f);
+        standardFuncs.insert(QByteArrayLiteral("glUniform1fv"), (QFunctionPointer)&glUniform1fv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform1i"), (QFunctionPointer)&glUniform1i);
+        standardFuncs.insert(QByteArrayLiteral("glUniform1iv"), (QFunctionPointer)&glUniform1iv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform2f"), (QFunctionPointer)&glUniform2f);
+        standardFuncs.insert(QByteArrayLiteral("glUniform2fv"), (QFunctionPointer)&glUniform2fv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform2i"), (QFunctionPointer)&glUniform2i);
+        standardFuncs.insert(QByteArrayLiteral("glUniform2iv"), (QFunctionPointer)&glUniform2iv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform3f"), (QFunctionPointer)&glUniform3f);
+        standardFuncs.insert(QByteArrayLiteral("glUniform3fv"), (QFunctionPointer)&glUniform3fv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform3i"), (QFunctionPointer)&glUniform3i);
+        standardFuncs.insert(QByteArrayLiteral("glUniform3iv"), (QFunctionPointer)&glUniform3iv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform4f"), (QFunctionPointer)&glUniform4f);
+        standardFuncs.insert(QByteArrayLiteral("glUniform4fv"), (QFunctionPointer)&glUniform4fv);
+        standardFuncs.insert(QByteArrayLiteral("glUniform4i"), (QFunctionPointer)&glUniform4i);
+        standardFuncs.insert(QByteArrayLiteral("glUniform4iv"), (QFunctionPointer)&glUniform4iv);
+        standardFuncs.insert(QByteArrayLiteral("glUniformMatrix2fv"), (QFunctionPointer)&glUniformMatrix2fv);
+        standardFuncs.insert(QByteArrayLiteral("glUniformMatrix3fv"), (QFunctionPointer)&glUniformMatrix3fv);
+        standardFuncs.insert(QByteArrayLiteral("glUniformMatrix4fv"), (QFunctionPointer)&glUniformMatrix4fv);
+        standardFuncs.insert(QByteArrayLiteral("glUseProgram"), (QFunctionPointer)&glUseProgram);
+        standardFuncs.insert(QByteArrayLiteral("glValidateProgram"), (QFunctionPointer)&glValidateProgram);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib1f"), (QFunctionPointer)&glVertexAttrib1f);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib1fv"), (QFunctionPointer)&glVertexAttrib1fv);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib2f"), (QFunctionPointer)&glVertexAttrib2f);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib2fv"), (QFunctionPointer)&glVertexAttrib2fv);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib3f"), (QFunctionPointer)&glVertexAttrib3f);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib3fv"), (QFunctionPointer)&glVertexAttrib3fv);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib4f"), (QFunctionPointer)&glVertexAttrib4f);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttrib4fv"), (QFunctionPointer)&glVertexAttrib4fv);
+        standardFuncs.insert(QByteArrayLiteral("glVertexAttribPointer"), (QFunctionPointer)&glVertexAttribPointer);
+        standardFuncs.insert(QByteArrayLiteral("glClearDepthf"), (QFunctionPointer)&glClearDepthf);
+        standardFuncs.insert(QByteArrayLiteral("glDepthRangef"), (QFunctionPointer)&glDepthRangef);
+    };
+
+    QHash<QByteArray, QFunctionPointer>::const_iterator i = standardFuncs.find(procName);
+    if (i != standardFuncs.end())
+        return i.value();
+
+    return QEGLPlatformContext::getProcAddress(procName);
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrteglcontext.h b/src/plugins/platforms/winrt/qwinrteglcontext.h
index c065847374..fb1199a79e 100644
--- a/src/plugins/platforms/winrt/qwinrteglcontext.h
+++ b/src/plugins/platforms/winrt/qwinrteglcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,8 @@ class QWinRTEGLContext : public QEGLPlatformContext
 public:
     explicit QWinRTEGLContext(const QSurfaceFormat &format, QPlatformOpenGLContext *share, EGLDisplay display, EGLSurface surface);
 
+    QFunctionPointer getProcAddress(const QByteArray &procName) Q_DECL_OVERRIDE;
+
 protected:
     EGLSurface eglSurfaceForPlatformSurface(QPlatformSurface *surface);
 
diff --git a/src/plugins/platforms/winrt/qwinrteventdispatcher.cpp b/src/plugins/platforms/winrt/qwinrteventdispatcher.cpp
index 98eb83f5eb..5255d93a05 100644
--- a/src/plugins/platforms/winrt/qwinrteventdispatcher.cpp
+++ b/src/plugins/platforms/winrt/qwinrteventdispatcher.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,7 +34,6 @@
 #include "qwinrteventdispatcher.h"
 #include <qpa/qwindowsysteminterface.h>
 #include <qpa/qplatformscreen.h>
-#include <qpa/qplatformscreenpageflipper.h>
 #include <QtCore/QThread>
 #include <QtGui/QGuiApplication>
 
diff --git a/src/plugins/platforms/winrt/qwinrteventdispatcher.h b/src/plugins/platforms/winrt/qwinrteventdispatcher.h
index 612d5ff6e2..3859385818 100644
--- a/src/plugins/platforms/winrt/qwinrteventdispatcher.h
+++ b/src/plugins/platforms/winrt/qwinrteventdispatcher.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtfiledialoghelper.cpp b/src/plugins/platforms/winrt/qwinrtfiledialoghelper.cpp
new file mode 100644
index 0000000000..768a94e951
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrtfiledialoghelper.cpp
@@ -0,0 +1,512 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qwinrtfiledialoghelper.h"
+#include "qwinrtfileengine.h"
+
+#include <QtCore/QEventLoop>
+#include <QtCore/QMap>
+#include <QtCore/QVector>
+#include <QtCore/qfunctions_winrt.h>
+
+#include <wrl.h>
+#include <windows.foundation.h>
+#include <windows.storage.pickers.h>
+
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Foundation::Collections;
+using namespace ABI::Windows::Storage;
+using namespace ABI::Windows::Storage::Pickers;
+
+typedef IAsyncOperationCompletedHandler<StorageFile *> SingleFileHandler;
+typedef IAsyncOperationCompletedHandler<IVectorView<StorageFile *> *> MultipleFileHandler;
+typedef IAsyncOperationCompletedHandler<StorageFolder *> SingleFolderHandler;
+
+QT_BEGIN_NAMESPACE
+
+// Required for save file picker
+class WindowsStringVector : public RuntimeClass<IVector<HSTRING>>
+{
+public:
+    HRESULT __stdcall GetAt(quint32 index, HSTRING *item)
+    {
+        *item = impl.at(index);
+        return S_OK;
+    }
+    HRESULT __stdcall get_Size(quint32 *size)
+    {
+        *size = impl.size();
+        return S_OK;
+    }
+    HRESULT __stdcall GetView(IVectorView<HSTRING> **view)
+    {
+        *view = Q_NULLPTR;
+        return E_NOTIMPL;
+    }
+    HRESULT __stdcall IndexOf(HSTRING value, quint32 *index, boolean *found)
+    {
+        *found = false;
+        for (int i = 0; i < impl.size(); ++i) {
+            qint32 result;
+            HRESULT hr = WindowsCompareStringOrdinal(impl.at(i), value, &result);
+            if (FAILED(hr))
+                return hr;
+            if (result == 0) {
+                *index = quint32(i);
+                *found = true;
+                break;
+            }
+        }
+        return S_OK;
+    }
+    HRESULT __stdcall SetAt(quint32 index, HSTRING item)
+    {
+        HSTRING newItem;
+        HRESULT hr = WindowsDuplicateString(item, &newItem);
+        if (FAILED(hr))
+            return hr;
+        impl[index] = newItem;
+        return S_OK;
+    }
+    HRESULT __stdcall InsertAt(quint32 index, HSTRING item)
+    {
+        HSTRING newItem;
+        HRESULT hr = WindowsDuplicateString(item, &newItem);
+        if (FAILED(hr))
+            return hr;
+        impl.insert(index, newItem);
+        return S_OK;
+    }
+    HRESULT __stdcall RemoveAt(quint32 index)
+    {
+        WindowsDeleteString(impl.takeAt(index));
+        return S_OK;
+    }
+    HRESULT __stdcall Append(HSTRING item)
+    {
+        HSTRING newItem;
+        HRESULT hr = WindowsDuplicateString(item, &newItem);
+        if (FAILED(hr))
+            return hr;
+        impl.append(newItem);
+        return S_OK;
+    }
+    HRESULT __stdcall RemoveAtEnd()
+    {
+        WindowsDeleteString(impl.takeLast());
+        return S_OK;
+    }
+    HRESULT __stdcall Clear()
+    {
+        foreach (const HSTRING &item, impl)
+            WindowsDeleteString(item);
+        impl.clear();
+        return S_OK;
+    }
+private:
+    QVector<HSTRING> impl;
+};
+
+template<typename T>
+static bool initializePicker(HSTRING runtimeId, T **picker, const QSharedPointer<QFileDialogOptions> &options)
+{
+    HRESULT hr;
+
+    ComPtr<IInspectable> basePicker;
+    hr = RoActivateInstance(runtimeId, &basePicker);
+    RETURN_FALSE_IF_FAILED("Failed to instantiate file picker");
+    hr = basePicker.Get()->QueryInterface(IID_PPV_ARGS(picker));
+    RETURN_FALSE_IF_FAILED("Failed to cast file picker");
+
+    if (options->isLabelExplicitlySet(QFileDialogOptions::Accept)) {
+        const QString labelText = options->labelText(QFileDialogOptions::Accept);
+        HStringReference labelTextRef(reinterpret_cast<const wchar_t *>(labelText.utf16()),
+                                      labelText.length());
+        hr = (*picker)->put_CommitButtonText(labelTextRef.Get());
+        RETURN_FALSE_IF_FAILED("Failed to set commit button text");
+    }
+
+    return true;
+}
+
+template<typename T>
+static bool initializeOpenPickerOptions(T *picker, const QSharedPointer<QFileDialogOptions> &options)
+{
+    HRESULT hr;
+    hr = picker->put_ViewMode(options->viewMode() == QFileDialogOptions::Detail
+                              ? PickerViewMode_Thumbnail : PickerViewMode_List);
+    RETURN_FALSE_IF_FAILED("Failed to set picker view mode");
+
+    ComPtr<IVector<HSTRING>> filters;
+    hr = picker->get_FileTypeFilter(&filters);
+    RETURN_FALSE_IF_FAILED("Failed to get file type filters list");
+    foreach (const QString &namedFilter, options->nameFilters()) {
+        foreach (const QString &filter, QPlatformFileDialogHelper::cleanFilterList(namedFilter)) {
+            // Remove leading star
+            const int offset = (filter.length() > 1 && filter.startsWith(QLatin1Char('*'))) ? 1 : 0;
+            HStringReference filterRef(reinterpret_cast<const wchar_t *>(filter.utf16() + offset),
+                                       filter.length() - offset);
+            hr = filters->Append(filterRef.Get());
+            if (FAILED(hr)) {
+                qWarning("Failed to add named file filter \"%s\": %s",
+                         qPrintable(filter), qPrintable(qt_error_string(hr)));
+            }
+        }
+    }
+    // The file dialog won't open with an empty list - add a default wildcard
+    quint32 size;
+    hr = filters->get_Size(&size);
+    RETURN_FALSE_IF_FAILED("Failed to get file type filters list size");
+    if (!size) {
+        hr = filters->Append(HString::MakeReference(L"*").Get());
+        RETURN_FALSE_IF_FAILED("Failed to add default wildcard to file type filters list");
+    }
+
+    return true;
+}
+
+class QWinRTFileDialogHelperPrivate
+{
+public:
+    bool shown;
+    QEventLoop loop;
+
+    // Input
+    QUrl directory;
+    QUrl saveFileName;
+    QString selectedNameFilter;
+
+    // Output
+    QList<QUrl> selectedFiles;
+};
+
+QWinRTFileDialogHelper::QWinRTFileDialogHelper()
+    : QPlatformFileDialogHelper(), d_ptr(new QWinRTFileDialogHelperPrivate)
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    d->shown = false;
+}
+
+QWinRTFileDialogHelper::~QWinRTFileDialogHelper()
+{
+}
+
+void QWinRTFileDialogHelper::exec()
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    if (!d->shown)
+        show(Qt::Dialog, Qt::ApplicationModal, 0);
+    d->loop.exec();
+}
+
+bool QWinRTFileDialogHelper::show(Qt::WindowFlags windowFlags, Qt::WindowModality windowModality, QWindow *parent)
+{
+    Q_UNUSED(windowFlags)
+    Q_UNUSED(windowModality)
+    Q_UNUSED(parent)
+    Q_D(QWinRTFileDialogHelper);
+
+    HRESULT hr;
+    const QSharedPointer<QFileDialogOptions> dialogOptions = options();
+    switch (dialogOptions->acceptMode()) {
+    default:
+    case QFileDialogOptions::AcceptOpen: {
+        switch (dialogOptions->fileMode()) {
+        case QFileDialogOptions::AnyFile:
+        case QFileDialogOptions::ExistingFile:
+        case QFileDialogOptions::ExistingFiles: {
+            ComPtr<IFileOpenPicker> picker;
+            if (!initializePicker(HString::MakeReference(RuntimeClass_Windows_Storage_Pickers_FileOpenPicker).Get(),
+                                  picker.GetAddressOf(), dialogOptions)) {
+                return false;
+            }
+            if (!initializeOpenPickerOptions(picker.Get(), dialogOptions))
+                return false;
+
+            if (dialogOptions->fileMode() == QFileDialogOptions::ExistingFiles) {
+                ComPtr<IAsyncOperation<IVectorView<StorageFile *> *>> op;
+                hr = picker->PickMultipleFilesAsync(&op);
+                RETURN_FALSE_IF_FAILED("Failed to open multi file picker");
+                hr = op->put_Completed(Callback<MultipleFileHandler>(this, &QWinRTFileDialogHelper::onMultipleFilesPicked).Get());
+            } else {
+                ComPtr<IAsyncOperation<StorageFile *>> op;
+                hr = picker->PickSingleFileAsync(&op);
+                RETURN_FALSE_IF_FAILED("Failed to open single file picker");
+                hr = op->put_Completed(Callback<SingleFileHandler>(this, &QWinRTFileDialogHelper::onSingleFilePicked).Get());
+            }
+            RETURN_FALSE_IF_FAILED("Failed to attach file picker callback");
+            break;
+        }
+        case QFileDialogOptions::Directory:
+        case QFileDialogOptions::DirectoryOnly: {
+            ComPtr<IFolderPicker> picker;
+            if (!initializePicker(HString::MakeReference(RuntimeClass_Windows_Storage_Pickers_FolderPicker).Get(),
+                                  picker.GetAddressOf(), dialogOptions)) {
+                return false;
+            }
+            if (!initializeOpenPickerOptions(picker.Get(), dialogOptions))
+                return false;
+
+            ComPtr<IAsyncOperation<StorageFolder *>> op;
+            hr = picker->PickSingleFolderAsync(&op);
+            RETURN_FALSE_IF_FAILED("Failed to open folder picker");
+            hr = op->put_Completed(Callback<SingleFolderHandler>(this, &QWinRTFileDialogHelper::onSingleFolderPicked).Get());
+            RETURN_FALSE_IF_FAILED("Failed to attach folder picker callback");
+            break;
+        }
+        }
+        break;
+    }
+    case QFileDialogOptions::AcceptSave: {
+        ComPtr<IFileSavePicker> picker;
+        if (!initializePicker(HString::MakeReference(RuntimeClass_Windows_Storage_Pickers_FileSavePicker).Get(),
+                              picker.GetAddressOf(), dialogOptions)) {
+            return false;
+        }
+
+        ComPtr<IMap<HSTRING, IVector<HSTRING> *>> choices;
+        hr = picker->get_FileTypeChoices(&choices);
+        RETURN_FALSE_IF_FAILED("Failed to get file extension choices");
+        foreach (const QString &namedFilter, dialogOptions->nameFilters()) {
+            ComPtr<IVector<HSTRING>> entry = Make<WindowsStringVector>();
+            foreach (const QString &filter, QPlatformFileDialogHelper::cleanFilterList(namedFilter)) {
+                // Remove leading star
+                const int offset = (filter.length() > 1 && filter.startsWith(QLatin1Char('*'))) ? 1 : 0;
+                HStringReference filterRef(reinterpret_cast<const wchar_t *>(filter.utf16() + offset),
+                                           filter.length() - offset);
+                hr = entry->Append(filterRef.Get());
+                if (FAILED(hr)) {
+                    qWarning("Failed to add named file filter \"%s\": %s",
+                             qPrintable(filter), qPrintable(qt_error_string(hr)));
+                }
+            }
+            const int offset = namedFilter.indexOf(QLatin1String(" ("));
+            const QString filterTitle = offset > 0 ? namedFilter.left(offset) : filterTitle;
+            HStringReference namedFilterRef(reinterpret_cast<const wchar_t *>(filterTitle.utf16()),
+                                            filterTitle.length());
+            boolean replaced;
+            hr = choices->Insert(namedFilterRef.Get(), entry.Get(), &replaced);
+            RETURN_FALSE_IF_FAILED("Failed to insert file extension choice entry");
+        }
+
+        const QString suffix = dialogOptions->defaultSuffix();
+        HStringReference nativeSuffix(reinterpret_cast<const wchar_t *>(suffix.utf16()),
+                                      suffix.length());
+        hr = picker->put_DefaultFileExtension(nativeSuffix.Get());
+        RETURN_FALSE_IF_FAILED("Failed to set default file extension");
+
+        const QString suggestedName = QFileInfo(d->saveFileName.toLocalFile()).fileName();
+        HStringReference nativeSuggestedName(reinterpret_cast<const wchar_t *>(suggestedName.utf16()),
+                                             suggestedName.length());
+        hr = picker->put_SuggestedFileName(nativeSuggestedName.Get());
+        RETURN_FALSE_IF_FAILED("Failed to set suggested file name");
+
+        ComPtr<IAsyncOperation<StorageFile *>> op;
+        hr = picker->PickSaveFileAsync(&op);
+        RETURN_FALSE_IF_FAILED("Failed to open save file picker");
+        hr = op->put_Completed(Callback<SingleFileHandler>(this, &QWinRTFileDialogHelper::onSingleFilePicked).Get());
+        RETURN_FALSE_IF_FAILED("Failed to attach file picker callback");
+        break;
+    }
+    }
+
+    d->shown = true;
+    return true;
+}
+
+void QWinRTFileDialogHelper::hide()
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    if (!d->shown)
+        return;
+
+    d->shown = false;
+}
+
+void QWinRTFileDialogHelper::setDirectory(const QUrl &directory)
+{
+    Q_D(QWinRTFileDialogHelper);
+    d->directory = directory;
+}
+
+QUrl QWinRTFileDialogHelper::directory() const
+{
+    Q_D(const QWinRTFileDialogHelper);
+    return d->directory;
+}
+
+void QWinRTFileDialogHelper::selectFile(const QUrl &saveFileName)
+{
+    Q_D(QWinRTFileDialogHelper);
+    d->saveFileName = saveFileName;
+}
+
+QList<QUrl> QWinRTFileDialogHelper::selectedFiles() const
+{
+    Q_D(const QWinRTFileDialogHelper);
+    return d->selectedFiles;
+}
+
+void QWinRTFileDialogHelper::selectNameFilter(const QString &selectedNameFilter)
+{
+    Q_D(QWinRTFileDialogHelper);
+    d->selectedNameFilter = selectedNameFilter;
+}
+
+QString QWinRTFileDialogHelper::selectedNameFilter() const
+{
+    Q_D(const QWinRTFileDialogHelper);
+    return d->selectedNameFilter;
+}
+
+HRESULT QWinRTFileDialogHelper::onSingleFilePicked(IAsyncOperation<StorageFile *> *args, AsyncStatus status)
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    QEventLoopLocker locker(&d->loop);
+    d->shown = false;
+    d->selectedFiles.clear();
+    if (status == Canceled || status == Error) {
+        emit reject();
+        return S_OK;
+    }
+
+    HRESULT hr;
+    ComPtr<IStorageFile> file;
+    hr = args->GetResults(&file);
+    Q_ASSERT_SUCCEEDED(hr);
+    if (!file) {
+        emit reject();
+        return S_OK;
+    }
+
+    appendFile(file.Get());
+    emit accept();
+    return S_OK;
+}
+
+HRESULT QWinRTFileDialogHelper::onMultipleFilesPicked(IAsyncOperation<IVectorView<StorageFile *> *> *args, AsyncStatus status)
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    QEventLoopLocker locker(&d->loop);
+    d->shown = false;
+    d->selectedFiles.clear();
+    if (status == Canceled || status == Error) {
+        emit reject();
+        return S_OK;
+    }
+
+    HRESULT hr;
+    ComPtr<IVectorView<StorageFile *>> fileList;
+    hr = args->GetResults(&fileList);
+    RETURN_HR_IF_FAILED("Failed to get file list");
+
+    quint32 size;
+    hr = fileList->get_Size(&size);
+    Q_ASSERT_SUCCEEDED(hr);
+    if (!size) {
+        emit reject();
+        return S_OK;
+    }
+    for (quint32 i = 0; i < size; ++i) {
+        ComPtr<IStorageFile> file;
+        hr = fileList->GetAt(i, &file);
+        Q_ASSERT_SUCCEEDED(hr);
+        appendFile(file.Get());
+    }
+
+    emit accept();
+    return S_OK;
+}
+
+HRESULT QWinRTFileDialogHelper::onSingleFolderPicked(IAsyncOperation<StorageFolder *> *args, AsyncStatus status)
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    QEventLoopLocker locker(&d->loop);
+    d->shown = false;
+    d->selectedFiles.clear();
+    if (status == Canceled || status == Error) {
+        emit reject();
+        return S_OK;
+    }
+
+    HRESULT hr;
+    ComPtr<IStorageFolder> folder;
+    hr = args->GetResults(&folder);
+    Q_ASSERT_SUCCEEDED(hr);
+    if (!folder) {
+        emit reject();
+        return S_OK;
+    }
+
+    appendFile(folder.Get());
+    emit accept();
+    return S_OK;
+}
+
+void QWinRTFileDialogHelper::appendFile(IInspectable *file)
+{
+    Q_D(QWinRTFileDialogHelper);
+
+    HRESULT hr;
+    ComPtr<IStorageItem> item;
+    hr = file->QueryInterface(IID_PPV_ARGS(&item));
+    Q_ASSERT_SUCCEEDED(hr);
+
+    HString path;
+    hr = item->get_Path(path.GetAddressOf());
+    Q_ASSERT_SUCCEEDED(hr);
+
+    quint32 pathLen;
+    const wchar_t *pathStr = path.GetRawBuffer(&pathLen);
+    const QString filePath = QString::fromWCharArray(pathStr, pathLen);
+    QWinRTFileEngineHandler::registerFile(filePath, item.Get());
+    d->selectedFiles.append(QUrl::fromLocalFile(filePath));
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtfiledialoghelper.h b/src/plugins/platforms/winrt/qwinrtfiledialoghelper.h
new file mode 100644
index 0000000000..f333f3f4ae
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrtfiledialoghelper.h
@@ -0,0 +1,104 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWINRTFILEDIALOGHELPER_H
+#define QWINRTFILEDIALOGHELPER_H
+
+#include <qpa/qplatformdialoghelper.h>
+#include <QtCore/qt_windows.h>
+
+struct IInspectable;
+namespace ABI {
+    namespace Windows {
+        namespace Storage {
+            class StorageFile;
+            class StorageFolder;
+            struct IStorageFile;
+        }
+        namespace Foundation {
+            enum class AsyncStatus;
+            template <typename T> struct IAsyncOperation;
+            namespace Collections {
+                template <typename T> struct IVectorView;
+            }
+        }
+    }
+}
+
+QT_BEGIN_NAMESPACE
+
+class QWinRTFileDialogHelperPrivate;
+class QWinRTFileDialogHelper : public QPlatformFileDialogHelper
+{
+    Q_OBJECT
+public:
+    explicit QWinRTFileDialogHelper();
+    ~QWinRTFileDialogHelper();
+
+    void exec() Q_DECL_OVERRIDE;
+    bool show(Qt::WindowFlags, Qt::WindowModality, QWindow *) Q_DECL_OVERRIDE;
+    void hide() Q_DECL_OVERRIDE;
+
+    bool defaultNameFilterDisables() const Q_DECL_OVERRIDE { return false; }
+    void setDirectory(const QUrl &directory) Q_DECL_OVERRIDE;
+    QUrl directory() const Q_DECL_OVERRIDE;
+    void selectFile(const QUrl &saveFileName);
+    QList<QUrl> selectedFiles() const Q_DECL_OVERRIDE;
+    void setFilter() Q_DECL_OVERRIDE { }
+    void selectNameFilter(const QString &selectedNameFilter) Q_DECL_OVERRIDE;
+    QString selectedNameFilter() const;
+
+private:
+    HRESULT onSingleFilePicked(ABI::Windows::Foundation::IAsyncOperation<ABI::Windows::Storage::StorageFile *> *,
+                               ABI::Windows::Foundation::AsyncStatus);
+    HRESULT onMultipleFilesPicked(ABI::Windows::Foundation::IAsyncOperation<ABI::Windows::Foundation::Collections::IVectorView<ABI::Windows::Storage::StorageFile *> *> *,
+                                  ABI::Windows::Foundation::AsyncStatus);
+    HRESULT onSingleFolderPicked(ABI::Windows::Foundation::IAsyncOperation<ABI::Windows::Storage::StorageFolder *> *,
+                                 ABI::Windows::Foundation::AsyncStatus);
+    void appendFile(IInspectable *);
+
+    QScopedPointer<QWinRTFileDialogHelperPrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTFileDialogHelper)
+};
+
+QT_END_NAMESPACE
+
+#endif // QWINRTFILEDIALOGHELPER_H
diff --git a/src/plugins/platforms/winrt/qwinrtfileengine.cpp b/src/plugins/platforms/winrt/qwinrtfileengine.cpp
new file mode 100644
index 0000000000..3a4aa519cc
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrtfileengine.cpp
@@ -0,0 +1,505 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qwinrtfileengine.h"
+
+#include <QtCore/QDateTime>
+#include <QtCore/QCoreApplication>
+#include <QtCore/QHash>
+#include <QtCore/qfunctions_winrt.h>
+
+#include <wrl.h>
+#include <windows.storage.h>
+#include <robuffer.h>
+
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Storage;
+using namespace ABI::Windows::Storage::Streams;
+
+typedef IAsyncOperationCompletedHandler<IRandomAccessStream *> StreamCompletedHandler;
+typedef IAsyncOperationWithProgressCompletedHandler<IBuffer *, UINT32> StreamReadCompletedHandler;
+
+QT_BEGIN_NAMESPACE
+
+#define RETURN_AND_SET_ERROR_IF_FAILED(error, ret) \
+    setError(error, qt_error_string(hr)); \
+    if (FAILED(hr)) \
+        return ret;
+
+Q_GLOBAL_STATIC(QWinRTFileEngineHandler, handlerInstance)
+
+class QWinRTFileEngineHandlerPrivate
+{
+public:
+    QHash<QString, ComPtr<IStorageItem>> files;
+};
+
+class QWinRTFileEnginePrivate
+{
+public:
+    QWinRTFileEnginePrivate(const QString &fileName, IStorageItem *file)
+        : fileName(fileName), file(file)
+    {
+        HRESULT hr;
+        hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_Streams_Buffer).Get(),
+                                    IID_PPV_ARGS(&bufferFactory));
+        Q_ASSERT_SUCCEEDED(hr);
+
+        lastSeparator = fileName.size() - 1;
+        for (int i = lastSeparator; i >= 0; --i) {
+            if (fileName.at(i).unicode() == '/' || fileName.at(i).unicode() == '\\') {
+                lastSeparator = i;
+                break;
+            }
+        }
+
+        firstDot = fileName.size();
+        for (int i = lastSeparator; i > fileName.size(); ++i) {
+            if (fileName.at(i).unicode() == '.') {
+                firstDot = i;
+                break;
+            }
+        }
+    }
+
+    ComPtr<IBufferFactory> bufferFactory;
+
+    QString fileName;
+    int lastSeparator;
+    int firstDot;
+    ComPtr<IStorageItem> file;
+    ComPtr<IRandomAccessStream> stream;
+
+    qint64 pos;
+
+private:
+    QWinRTFileEngineHandler *q_ptr;
+    Q_DECLARE_PUBLIC(QWinRTFileEngineHandler)
+};
+
+
+QWinRTFileEngineHandler::QWinRTFileEngineHandler()
+    : d_ptr(new QWinRTFileEngineHandlerPrivate)
+{
+}
+
+QWinRTFileEngineHandler::~QWinRTFileEngineHandler()
+{
+}
+
+void QWinRTFileEngineHandler::registerFile(const QString &fileName, IStorageItem *file)
+{
+    handlerInstance->d_func()->files.insert(QDir::cleanPath(fileName), file);
+}
+
+IStorageItem *QWinRTFileEngineHandler::registeredFile(const QString &fileName)
+{
+    return handlerInstance->d_func()->files.value(fileName).Get();
+}
+
+QAbstractFileEngine *QWinRTFileEngineHandler::create(const QString &fileName) const
+{
+    Q_D(const QWinRTFileEngineHandler);
+
+    QHash<QString, ComPtr<IStorageItem>>::const_iterator file = d->files.find(fileName);
+    if (file != d->files.end())
+        return new QWinRTFileEngine(fileName, file.value().Get());
+
+    return Q_NULLPTR;
+}
+
+static HRESULT getDestinationFolder(const QString &fileName, const QString newFileName,
+                                    IStorageItem *file, IStorageFolder **folder)
+{
+    HRESULT hr;
+    ComPtr<IAsyncOperation<StorageFolder *>> op;
+    QFileInfo newFileInfo(newFileName);
+#ifndef Q_OS_WINPHONE
+    QFileInfo fileInfo(fileName);
+    if (fileInfo.dir() == newFileInfo.dir()) {
+        ComPtr<IStorageItem2> item;
+        hr = file->QueryInterface(IID_PPV_ARGS(&item));
+        Q_ASSERT_SUCCEEDED(hr);
+
+        hr = item->GetParentAsync(&op);
+    } else
+#else
+    Q_UNUSED(fileName);
+    Q_UNUSED(file)
+#endif
+    {
+        ComPtr<IStorageFolderStatics> folderFactory;
+        hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_StorageFolder).Get(),
+                                    IID_PPV_ARGS(&folderFactory));
+        Q_ASSERT_SUCCEEDED(hr);
+
+        const QString newFilePath = QDir::toNativeSeparators(newFileInfo.absolutePath());
+        HStringReference nativeNewFilePath(reinterpret_cast<LPCWSTR>(newFilePath.utf16()),
+                                           newFilePath.length());
+        hr = folderFactory->GetFolderFromPathAsync(nativeNewFilePath.Get(), &op);
+    }
+    if (FAILED(hr))
+        return hr;
+    return QWinRTFunctions::await(op, folder);
+}
+
+QWinRTFileEngine::QWinRTFileEngine(const QString &fileName, IStorageItem *file)
+    : d_ptr(new QWinRTFileEnginePrivate(fileName, file))
+{
+}
+
+QWinRTFileEngine::~QWinRTFileEngine()
+{
+}
+
+bool QWinRTFileEngine::open(QIODevice::OpenMode openMode)
+{
+    Q_D(QWinRTFileEngine);
+
+    FileAccessMode fileAccessMode = (openMode & QIODevice::WriteOnly)
+            ? FileAccessMode_ReadWrite : FileAccessMode_Read;
+
+    HRESULT hr;
+    ComPtr<IStorageFile> file;
+    hr = d->file.As(&file);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::OpenError, false);
+
+    ComPtr<IAsyncOperation<IRandomAccessStream *>> op;
+    hr = file->OpenAsync(fileAccessMode, &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::OpenError, false);
+
+    hr = QWinRTFunctions::await(op, d->stream.GetAddressOf());
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::OpenError, false);
+
+    return SUCCEEDED(hr);
+}
+
+bool QWinRTFileEngine::close()
+{
+    Q_D(QWinRTFileEngine);
+
+    if (!d->stream)
+        return false;
+
+    ComPtr<IClosable> closable;
+    HRESULT hr = d->stream.As(&closable);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    hr = closable->Close();
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::UnspecifiedError, false);
+    d->stream.Reset();
+    return SUCCEEDED(hr);
+}
+
+qint64 QWinRTFileEngine::size() const
+{
+    Q_D(const QWinRTFileEngine);
+
+    if (!d->stream)
+        return 0;
+
+    UINT64 size;
+    HRESULT hr;
+    hr = d->stream->get_Size(&size);
+    RETURN_IF_FAILED("Failed to get file size", return 0);
+
+    return qint64(size);
+}
+
+qint64 QWinRTFileEngine::pos() const
+{
+    Q_D(const QWinRTFileEngine);
+    return d->pos;
+}
+
+bool QWinRTFileEngine::seek(qint64 pos)
+{
+    Q_D(QWinRTFileEngine);
+
+    if (!d->stream)
+        return false;
+
+    HRESULT hr = d->stream->Seek(pos);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::PositionError, false);
+    d->pos = pos;
+    return SUCCEEDED(hr);
+}
+
+bool QWinRTFileEngine::remove()
+{
+    Q_D(QWinRTFileEngine);
+
+    ComPtr<IAsyncAction> op;
+    HRESULT hr = d->file->DeleteAsync(StorageDeleteOption_Default, &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::RemoveError, false);
+
+    hr = QWinRTFunctions::await(op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::RemoveError, false);
+    return SUCCEEDED(hr);
+}
+
+bool QWinRTFileEngine::copy(const QString &newName)
+{
+    Q_D(QWinRTFileEngine);
+
+    HRESULT hr;
+    ComPtr<IStorageFolder> destinationFolder;
+    hr = getDestinationFolder(d->fileName, newName, d->file.Get(), destinationFolder.GetAddressOf());
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::CopyError, false);
+
+    ComPtr<IStorageFile> file;
+    hr = d->file.As(&file);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::CopyError, false);
+
+    const QString destinationName = QFileInfo(newName).fileName();
+    HStringReference nativeDestinationName(reinterpret_cast<LPCWSTR>(destinationName.utf16()), destinationName.length());
+    ComPtr<IAsyncOperation<StorageFile *>> op;
+    hr = file->CopyOverloadDefaultOptions(destinationFolder.Get(), nativeDestinationName.Get(), &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::CopyError, false);
+
+    ComPtr<IStorageFile> newFile;
+    hr = QWinRTFunctions::await(op, newFile.GetAddressOf());
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::CopyError, false);
+    return SUCCEEDED(hr);
+}
+
+bool QWinRTFileEngine::rename(const QString &newName)
+{
+    Q_D(QWinRTFileEngine);
+
+    HRESULT hr;
+    ComPtr<IStorageFolder> destinationFolder;
+    hr = getDestinationFolder(d->fileName, newName, d->file.Get(), destinationFolder.GetAddressOf());
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::RenameError, false);
+
+    const QString destinationName = QFileInfo(newName).fileName();
+    HStringReference nativeDestinationName(reinterpret_cast<LPCWSTR>(destinationName.utf16()), destinationName.length());
+    ComPtr<IAsyncAction> op;
+    hr = d->file->RenameAsyncOverloadDefaultOptions(nativeDestinationName.Get(), &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::RenameError, false);
+    return SUCCEEDED(hr);
+}
+
+bool QWinRTFileEngine::renameOverwrite(const QString &newName)
+{
+    Q_D(QWinRTFileEngine);
+
+    HRESULT hr;
+    ComPtr<IStorageFolder> destinationFolder;
+    hr = getDestinationFolder(d->fileName, newName, d->file.Get(), destinationFolder.GetAddressOf());
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::RenameError, false);
+
+    const QString destinationName = QFileInfo(newName).fileName();
+    HStringReference nativeDestinationName(reinterpret_cast<LPCWSTR>(destinationName.utf16()), destinationName.length());
+    ComPtr<IAsyncAction> op;
+    hr = d->file->RenameAsync(nativeDestinationName.Get(), NameCollisionOption_ReplaceExisting, &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::RenameError, false);
+    return SUCCEEDED(hr);
+}
+
+QAbstractFileEngine::FileFlags QWinRTFileEngine::fileFlags(FileFlags type) const
+{
+    Q_D(const QWinRTFileEngine);
+
+    FileFlags flags = ExistsFlag|ReadOwnerPerm|ReadUserPerm|WriteOwnerPerm|WriteUserPerm;
+
+    HRESULT hr;
+    FileAttributes attributes;
+    hr = d->file->get_Attributes(&attributes);
+    RETURN_IF_FAILED("Failed to get file attributes", return flags);
+    if (attributes & FileAttributes_ReadOnly)
+        flags ^= WriteUserPerm;
+    if (attributes & FileAttributes_Directory)
+        flags |= DirectoryType;
+    else
+        flags |= FileType;
+
+    return type & flags;
+}
+
+bool QWinRTFileEngine::setPermissions(uint perms)
+{
+    Q_UNUSED(perms);
+    Q_UNIMPLEMENTED();
+    return false;
+}
+
+QString QWinRTFileEngine::fileName(FileName type) const
+{
+    Q_D(const QWinRTFileEngine);
+
+    switch (type) {
+    default:
+    case DefaultName:
+    case AbsoluteName:
+    case CanonicalName:
+        break;
+    case BaseName:
+        return d->lastSeparator < 0
+                ? d->fileName : d->fileName.mid(d->lastSeparator, d->firstDot - d->lastSeparator);
+    case PathName:
+    case AbsolutePathName:
+    case CanonicalPathName:
+        return d->fileName.mid(0, d->lastSeparator);
+    case LinkName:
+    case BundleName:
+        return QString();
+    }
+    return d->fileName;
+}
+
+QDateTime QWinRTFileEngine::fileTime(FileTime type) const
+{
+    Q_D(const QWinRTFileEngine);
+
+    HRESULT hr;
+    DateTime dateTime = { 0 };
+    switch (type) {
+    case CreationTime:
+        hr = d->file->get_DateCreated(&dateTime);
+        RETURN_IF_FAILED("Failed to get file creation time", return QDateTime());
+        break;
+    case ModificationTime:
+    case AccessTime: {
+        ComPtr<IAsyncOperation<FileProperties::BasicProperties *>> op;
+        hr = d->file->GetBasicPropertiesAsync(&op);
+        RETURN_IF_FAILED("Failed to initiate file properties", return QDateTime());
+        ComPtr<FileProperties::IBasicProperties> properties;
+        hr = QWinRTFunctions::await(op, properties.GetAddressOf());
+        RETURN_IF_FAILED("Failed to get file properties", return QDateTime());
+        hr = type == ModificationTime ? properties->get_DateModified(&dateTime)
+                                      : properties->get_ItemDate(&dateTime);
+        RETURN_IF_FAILED("Failed to get file date", return QDateTime());
+    }
+        break;
+    }
+
+    SYSTEMTIME systemTime;
+    FileTimeToSystemTime((const FILETIME *)&dateTime, &systemTime);
+    QDate date(systemTime.wYear, systemTime.wMonth, systemTime.wDay);
+    QTime time(systemTime.wHour, systemTime.wMinute, systemTime.wSecond, systemTime.wMilliseconds);
+    return QDateTime(date, time);
+}
+
+qint64 QWinRTFileEngine::read(char *data, qint64 maxlen)
+{
+    Q_D(QWinRTFileEngine);
+
+    if (!d->stream)
+        return -1;
+
+    ComPtr<IInputStream> stream;
+    HRESULT hr = d->stream.As(&stream);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+
+    UINT32 length = qBound(quint64(0), quint64(maxlen), quint64(UINT_MAX));
+    ComPtr<IBuffer> buffer;
+    hr = d->bufferFactory->Create(length, &buffer);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+
+    ComPtr<IAsyncOperationWithProgress<IBuffer *, UINT32>> op;
+    hr = stream->ReadAsync(buffer.Get(), length, InputStreamOptions_None, &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+
+    hr = QWinRTFunctions::await(op, buffer.GetAddressOf());
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+
+    hr = buffer->get_Length(&length);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+
+    ComPtr<Windows::Storage::Streams::IBufferByteAccess> byteArrayAccess;
+    hr = buffer.As(&byteArrayAccess);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+
+    byte *bytes;
+    hr = byteArrayAccess->Buffer(&bytes);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::ReadError, -1);
+    memcpy(data, bytes, length);
+    return qint64(length);
+}
+
+qint64 QWinRTFileEngine::write(const char *data, qint64 maxlen)
+{
+    Q_D(QWinRTFileEngine);
+
+    if (!d->stream)
+        return -1;
+
+    ComPtr<IOutputStream> stream;
+    HRESULT hr = d->stream.As(&stream);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+
+    UINT32 length = qBound(quint64(0), quint64(maxlen), quint64(UINT_MAX));
+    ComPtr<IBuffer> buffer;
+    hr = d->bufferFactory->Create(length, &buffer);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+    hr = buffer->put_Length(length);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+
+    ComPtr<Windows::Storage::Streams::IBufferByteAccess> byteArrayAccess;
+    hr = buffer.As(&byteArrayAccess);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+
+    byte *bytes;
+    hr = byteArrayAccess->Buffer(&bytes);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+    memcpy(bytes, data, length);
+
+    ComPtr<IAsyncOperationWithProgress<UINT32, UINT32>> op;
+    hr = stream->WriteAsync(buffer.Get(), &op);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+
+    hr = QWinRTFunctions::await(op, &length);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+
+    ComPtr<IAsyncOperation<bool>> flushOp;
+    hr = stream->FlushAsync(&flushOp);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+    boolean flushed;
+    hr = QWinRTFunctions::await(flushOp, &flushed);
+    RETURN_AND_SET_ERROR_IF_FAILED(QFileDevice::WriteError, -1);
+
+    return qint64(length);
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtfileengine.h b/src/plugins/platforms/winrt/qwinrtfileengine.h
new file mode 100644
index 0000000000..59eeb1c44c
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrtfileengine.h
@@ -0,0 +1,104 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWINRTFILEENGINE_H
+#define QWINRTFILEENGINE_H
+
+#include <private/qabstractfileengine_p.h>
+
+QT_BEGIN_NAMESPACE
+
+namespace ABI {
+    namespace Windows {
+        namespace Storage {
+            struct IStorageItem;
+        }
+    }
+}
+
+class QWinRTFileEngineHandlerPrivate;
+class QWinRTFileEngineHandler : public QAbstractFileEngineHandler
+{
+public:
+    QWinRTFileEngineHandler();
+    ~QWinRTFileEngineHandler();
+    QAbstractFileEngine *create(const QString &fileName) const Q_DECL_OVERRIDE;
+
+    static void registerFile(const QString &fileName, ABI::Windows::Storage::IStorageItem *file);
+    static ABI::Windows::Storage::IStorageItem *registeredFile(const QString &fileName);
+
+private:
+    QScopedPointer<QWinRTFileEngineHandlerPrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTFileEngineHandler)
+};
+
+class QWinRTFileEnginePrivate;
+class QWinRTFileEngine : public QAbstractFileEngine
+{
+public:
+    QWinRTFileEngine(const QString &fileName, ABI::Windows::Storage::IStorageItem *file);
+    ~QWinRTFileEngine();
+
+    bool open(QIODevice::OpenMode openMode) Q_DECL_OVERRIDE;
+    bool close() Q_DECL_OVERRIDE;
+    qint64 size() const Q_DECL_OVERRIDE;
+    qint64 pos() const Q_DECL_OVERRIDE;
+    bool seek(qint64 pos) Q_DECL_OVERRIDE;
+    bool remove() Q_DECL_OVERRIDE;
+    bool copy(const QString &newName) Q_DECL_OVERRIDE;
+    bool rename(const QString &newName) Q_DECL_OVERRIDE;
+    bool renameOverwrite(const QString &newName) Q_DECL_OVERRIDE;
+    FileFlags fileFlags(FileFlags type=FileInfoAll) const Q_DECL_OVERRIDE;
+    bool setPermissions(uint perms) Q_DECL_OVERRIDE;
+    QString fileName(FileName type=DefaultName) const Q_DECL_OVERRIDE;
+    QDateTime fileTime(FileTime type) const Q_DECL_OVERRIDE;
+
+    qint64 read(char *data, qint64 maxlen) Q_DECL_OVERRIDE;
+    qint64 write(const char *data, qint64 len) Q_DECL_OVERRIDE;
+
+private:
+    QScopedPointer<QWinRTFileEnginePrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTFileEngine)
+};
+
+QT_END_NAMESPACE
+
+#endif // QWINRTFILEENGINE_H
diff --git a/src/plugins/platforms/winrt/qwinrtfontdatabase.cpp b/src/plugins/platforms/winrt/qwinrtfontdatabase.cpp
index f4e1fbe533..a41e5f8f38 100644
--- a/src/plugins/platforms/winrt/qwinrtfontdatabase.cpp
+++ b/src/plugins/platforms/winrt/qwinrtfontdatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtfontdatabase.h b/src/plugins/platforms/winrt/qwinrtfontdatabase.h
index eabcc83afd..f0c4714911 100644
--- a/src/plugins/platforms/winrt/qwinrtfontdatabase.h
+++ b/src/plugins/platforms/winrt/qwinrtfontdatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtinputcontext.cpp b/src/plugins/platforms/winrt/qwinrtinputcontext.cpp
index 8e1728dc04..ddfd1f1dc9 100644
--- a/src/plugins/platforms/winrt/qwinrtinputcontext.cpp
+++ b/src/plugins/platforms/winrt/qwinrtinputcontext.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtinputcontext.h b/src/plugins/platforms/winrt/qwinrtinputcontext.h
index 0a35f9b6e1..b6ebd6ba4a 100644
--- a/src/plugins/platforms/winrt/qwinrtinputcontext.h
+++ b/src/plugins/platforms/winrt/qwinrtinputcontext.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtintegration.cpp b/src/plugins/platforms/winrt/qwinrtintegration.cpp
index b3a2cafa2e..b8ca9fdc66 100644
--- a/src/plugins/platforms/winrt/qwinrtintegration.cpp
+++ b/src/plugins/platforms/winrt/qwinrtintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -48,7 +40,7 @@
 #include "qwinrtservices.h"
 #include "qwinrteglcontext.h"
 #include "qwinrtfontdatabase.h"
-#include "qwinrtplatformtheme.h"
+#include "qwinrttheme.h"
 
 #include <QtGui/QOpenGLContext>
 
@@ -63,18 +55,6 @@ using namespace ABI::Windows::UI::Core;
 using namespace ABI::Windows::UI::ViewManagement;
 using namespace ABI::Windows::ApplicationModel::Core;
 
-static IUISettings *getSettings()
-{
-    static IUISettings *settings = 0;
-    if (!settings) {
-        if (FAILED(RoActivateInstance(Wrappers::HString::MakeReference(RuntimeClass_Windows_UI_ViewManagement_UISettings).Get(),
-                                      reinterpret_cast<IInspectable **>(&settings)))) {
-            qWarning("Could not activate UISettings.");
-        }
-    }
-    return settings;
-}
-
 QT_BEGIN_NAMESPACE
 
 QWinRTIntegration::QWinRTIntegration()
@@ -82,26 +62,7 @@ QWinRTIntegration::QWinRTIntegration()
     , m_fontDatabase(new QWinRTFontDatabase)
     , m_services(new QWinRTServices)
 {
-    // Obtain the WinRT Application, view, and window
-    ICoreApplication *application;
-    if (FAILED(RoGetActivationFactory(Wrappers::HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
-                                      IID_PPV_ARGS(&application))))
-        qCritical("Could not attach to the application factory.");
-
-    ICoreApplicationView *view;
-    if (FAILED(application->GetCurrentView(&view))) {
-        qCritical("Could not obtain the application view - have you started outside of WinRT?");
-        return;
-    }
-
-    // Get core window (will act as our screen)
-    ICoreWindow *window;
-    if (FAILED(view->get_CoreWindow(&window))) {
-        qCritical("Could not obtain the application window - have you started outside of WinRT?");
-        return;
-    }
-    window->Activate();
-    m_screen = new QWinRTScreen(window);
+    m_screen = new QWinRTScreen;
     screenAdded(m_screen);
 
     m_success = true;
@@ -133,26 +94,7 @@ bool QWinRTIntegration::hasCapability(QPlatformIntegration::Capability cap) cons
 
 QVariant QWinRTIntegration::styleHint(StyleHint hint) const
 {
-    switch (hint) {
-    case CursorFlashTime:
-        if (IUISettings *settings = getSettings()) {
-            quint32 blinkRate;
-            settings->get_CaretBlinkRate(&blinkRate);
-            return blinkRate;
-        }
-        break;
-    case MouseDoubleClickInterval:
-        if (IUISettings *settings = getSettings()) {
-            quint32 doubleClickTime;
-            settings->get_DoubleClickTime(&doubleClickTime);
-            return doubleClickTime;
-        }
-    case ShowIsFullScreen:
-        return true;
-    default:
-        break;
-    }
-    return QPlatformIntegration::styleHint(hint);
+    return QWinRTTheme::styleHint(hint);
 }
 
 QPlatformWindow *QWinRTIntegration::createPlatformWindow(QWindow *window) const
@@ -200,7 +142,7 @@ QPlatformTheme *QWinRTIntegration::createPlatformTheme(const QString &
 name) const
 {
     if (name == QLatin1String("winrt"))
-        return new QWinRTPlatformTheme();
+        return new QWinRTTheme();
 
     return 0;
 }
diff --git a/src/plugins/platforms/winrt/qwinrtintegration.h b/src/plugins/platforms/winrt/qwinrtintegration.h
index 983637e670..f59f26bcb0 100644
--- a/src/plugins/platforms/winrt/qwinrtintegration.h
+++ b/src/plugins/platforms/winrt/qwinrtintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtmessagedialoghelper.cpp b/src/plugins/platforms/winrt/qwinrtmessagedialoghelper.cpp
new file mode 100644
index 0000000000..85638a1b99
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrtmessagedialoghelper.cpp
@@ -0,0 +1,224 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qwinrtmessagedialoghelper.h"
+#include "qwinrttheme.h"
+
+#include <QtCore/qfunctions_winrt.h>
+
+#include <windows.ui.popups.h>
+#include <windows.foundation.h>
+#include <windows.foundation.collections.h>
+#include <wrl.h>
+
+using namespace ABI::Windows::Foundation;
+using namespace ABI::Windows::Foundation::Collections;
+using namespace ABI::Windows::UI::Popups;
+using namespace Microsoft::WRL;
+using namespace Microsoft::WRL::Wrappers;
+
+typedef IAsyncOperationCompletedHandler<IUICommand *> DialogCompletedHandler;
+
+QT_BEGIN_NAMESPACE
+
+class CommandId : public RuntimeClass<IInspectable>
+{
+public:
+    CommandId(QPlatformDialogHelper::StandardButton button)
+        : button(button) { }
+    QPlatformDialogHelper::StandardButton button;
+};
+
+class QWinRTMessageDialogHelperPrivate
+{
+public:
+    const QWinRTTheme *theme;
+    bool shown;
+    ComPtr<IAsyncInfo> info;
+    QEventLoop loop;
+};
+
+QWinRTMessageDialogHelper::QWinRTMessageDialogHelper(const QWinRTTheme *theme)
+    : QPlatformMessageDialogHelper(), d_ptr(new QWinRTMessageDialogHelperPrivate)
+{
+    Q_D(QWinRTMessageDialogHelper);
+
+    d->theme = theme;
+    d->shown = false;
+}
+
+QWinRTMessageDialogHelper::~QWinRTMessageDialogHelper()
+{
+    Q_D(QWinRTMessageDialogHelper);
+
+    if (d->shown)
+        hide();
+}
+
+void QWinRTMessageDialogHelper::exec()
+{
+    Q_D(QWinRTMessageDialogHelper);
+
+    if (!d->shown)
+        show(Qt::Dialog, Qt::ApplicationModal, 0);
+    d->loop.exec();
+}
+
+bool QWinRTMessageDialogHelper::show(Qt::WindowFlags windowFlags, Qt::WindowModality windowModality, QWindow *parent)
+{
+    Q_UNUSED(windowFlags)
+    Q_UNUSED(windowModality)
+    Q_UNUSED(parent)
+    Q_D(QWinRTMessageDialogHelper);
+
+    QSharedPointer<QMessageDialogOptions> options = this->options();
+    const QString informativeText = options->informativeText();
+    const QString title = options->windowTitle();
+    const QString text = informativeText.isEmpty() ? options->text() : (options->text() + QLatin1Char('\n') + informativeText);
+
+    HRESULT hr;
+    ComPtr<IMessageDialogFactory> dialogFactory;
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_UI_Popups_MessageDialog).Get(),
+                                IID_PPV_ARGS(&dialogFactory));
+    RETURN_FALSE_IF_FAILED("Failed to create dialog factory");
+
+    ComPtr<IUICommandFactory> commandFactory;
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_UI_Popups_UICommand).Get(),
+                                IID_PPV_ARGS(&commandFactory));
+    RETURN_FALSE_IF_FAILED("Failed to create command factory");
+
+    ComPtr<IMessageDialog> dialog;
+    HStringReference nativeText(reinterpret_cast<LPCWSTR>(text.utf16()), text.size());
+    if (!title.isEmpty()) {
+        HStringReference nativeTitle(reinterpret_cast<LPCWSTR>(title.utf16()), title.size());
+        hr = dialogFactory->CreateWithTitle(nativeText.Get(), nativeTitle.Get(), &dialog);
+        RETURN_FALSE_IF_FAILED("Failed to create dialog with title");
+    } else {
+        hr = dialogFactory->Create(nativeText.Get(), &dialog);
+        RETURN_FALSE_IF_FAILED("Failed to create dialog");
+    }
+
+    // Add Buttons
+    ComPtr<IVector<IUICommand *>> dialogCommands;
+    hr = dialog->get_Commands(&dialogCommands);
+    RETURN_FALSE_IF_FAILED("Failed to get dialog commands");
+
+    // If no button is specified we need to create one to get close notification
+    int buttons = options->standardButtons();
+    if (buttons == 0)
+        buttons = Ok;
+
+    for (int i = FirstButton; i < LastButton; i<<=1) {
+        if (!(buttons & i))
+            continue;
+        // Add native command
+        const QString label = d->theme->standardButtonText(i);
+        HStringReference nativeLabel(reinterpret_cast<LPCWSTR>(label.utf16()), label.size());
+        ComPtr<IUICommand> command;
+        hr = commandFactory->Create(nativeLabel.Get(), &command);
+        RETURN_FALSE_IF_FAILED("Failed to create message box command");
+        ComPtr<IInspectable> id = Make<CommandId>(static_cast<StandardButton>(i));
+        hr = command->put_Id(id.Get());
+        RETURN_FALSE_IF_FAILED("Failed to set command ID");
+        hr = dialogCommands->Append(command.Get());
+        if (hr == E_BOUNDS) {
+            qErrnoWarning(hr, "The WinRT message dialog supports a maximum of three buttons");
+            continue;
+        }
+        RETURN_FALSE_IF_FAILED("Failed to append message box command");
+        if (i == Abort || i == Cancel || i == Close) {
+            quint32 size;
+            hr = dialogCommands->get_Size(&size);
+            RETURN_FALSE_IF_FAILED("Failed to get command list size");
+            hr = dialog->put_CancelCommandIndex(size - 1);
+            RETURN_FALSE_IF_FAILED("Failed to set cancel index");
+        }
+    }
+
+    ComPtr<IAsyncOperation<IUICommand *>> op;
+    hr = dialog->ShowAsync(&op);
+    RETURN_FALSE_IF_FAILED("Failed to show dialog");
+    hr = op->put_Completed(Callback<DialogCompletedHandler>(this, &QWinRTMessageDialogHelper::onCompleted).Get());
+    RETURN_FALSE_IF_FAILED("Failed to set dialog callback");
+
+    d->shown = true;
+    hr = op.As(&d->info);
+    RETURN_FALSE_IF_FAILED("Failed to acquire AsyncInfo for MessageDialog");
+
+    return true;
+}
+
+void QWinRTMessageDialogHelper::hide()
+{
+    Q_D(QWinRTMessageDialogHelper);
+
+    if (!d->shown)
+        return;
+
+    HRESULT hr = d->info->Cancel();
+    if (FAILED(hr))
+        qErrnoWarning(hr, "Failed to cancel dialog operation");
+
+    d->shown = false;
+}
+
+HRESULT QWinRTMessageDialogHelper::onCompleted(IAsyncOperation<IUICommand *> *asyncInfo, AsyncStatus status)
+{
+    Q_UNUSED(status);
+    Q_D(QWinRTMessageDialogHelper);
+
+    if (d->loop.isRunning())
+       d->loop.exit();
+
+    d->shown = false;
+
+    if (status == Canceled) {
+        emit reject();
+        return S_OK;
+    }
+
+    HRESULT hr;
+    ComPtr<IUICommand> command;
+    hr = asyncInfo->GetResults(&command);
+    RETURN_OK_IF_FAILED("Failed to get command");
+
+    ComPtr<CommandId> id;
+    hr = command->get_Id(&id);
+    RETURN_OK_IF_FAILED("Failed to get command ID");
+
+    ButtonRole role = buttonRole(id->button);
+    emit clicked(id->button, role);
+    return S_OK;
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtmessagedialoghelper.h b/src/plugins/platforms/winrt/qwinrtmessagedialoghelper.h
new file mode 100644
index 0000000000..3ec56e214c
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrtmessagedialoghelper.h
@@ -0,0 +1,82 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWINRTMESSAGEDIALOGHELPER_H
+#define QWINRTMESSAGEDIALOGHELPER_H
+
+#include <qpa/qplatformdialoghelper.h>
+#include <QtCore/qt_windows.h>
+
+namespace ABI {
+    namespace Windows {
+        namespace UI {
+            namespace Popups {
+                struct IUICommand;
+            }
+        }
+        namespace Foundation {
+            enum class AsyncStatus;
+            template <typename T> struct IAsyncOperation;
+        }
+    }
+}
+
+QT_BEGIN_NAMESPACE
+
+class QWinRTTheme;
+
+class QWinRTMessageDialogHelperPrivate;
+class QWinRTMessageDialogHelper : public QPlatformMessageDialogHelper
+{
+    Q_OBJECT
+public:
+    explicit QWinRTMessageDialogHelper(const QWinRTTheme *theme);
+    ~QWinRTMessageDialogHelper();
+
+    void exec();
+    bool show(Qt::WindowFlags windowFlags,
+              Qt::WindowModality windowModality,
+              QWindow *parent);
+    void hide();
+
+private:
+    HRESULT onCompleted(ABI::Windows::Foundation::IAsyncOperation<ABI::Windows::UI::Popups::IUICommand *> *asyncInfo,
+                        ABI::Windows::Foundation::AsyncStatus status);
+
+    QScopedPointer<QWinRTMessageDialogHelperPrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTMessageDialogHelper)
+};
+
+QT_END_NAMESPACE
+
+#endif // QWINRTMESSAGEDIALOGHELPER_H
diff --git a/src/plugins/platforms/winrt/qwinrtplatformmessagedialoghelper.cpp b/src/plugins/platforms/winrt/qwinrtplatformmessagedialoghelper.cpp
deleted file mode 100644
index c2f884055d..0000000000
--- a/src/plugins/platforms/winrt/qwinrtplatformmessagedialoghelper.cpp
+++ /dev/null
@@ -1,204 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qwinrtplatformmessagedialoghelper.h"
-
-#include <QtGui/QGuiApplication>
-#include <private/qguiapplication_p.h>
-#include <qpa/qplatformtheme.h>
-
-#include <asyncinfo.h>
-#include <windows.ui.popups.h>
-#include <windows.foundation.h>
-#include <windows.foundation.collections.h>
-#include <wrl.h>
-
-using namespace ABI::Windows::Foundation;
-using namespace ABI::Windows::Foundation::Collections;
-using namespace ABI::Windows::UI::Popups;
-using namespace Microsoft::WRL;
-using namespace Microsoft::WRL::Wrappers;
-
-QT_BEGIN_NAMESPACE
-
-struct QWinRTPlatformMessageDialogInfo
-{
-    ComPtr<IAsyncInfo> info;
-};
-
-QWinRTPlatformMessageDialogHelper::QWinRTPlatformMessageDialogHelper() :
-    QPlatformMessageDialogHelper(),
-    m_info(new QWinRTPlatformMessageDialogInfo),
-    m_shown(false)
-{
-}
-
-QWinRTPlatformMessageDialogHelper::~QWinRTPlatformMessageDialogHelper()
-{
-    if (m_shown)
-        hide();
-    delete m_info;
-}
-
-void QWinRTPlatformMessageDialogHelper::exec()
-{
-    if (!m_shown)
-        show(Qt::Dialog, Qt::ApplicationModal, 0);
-    m_loop.exec();
-}
-
-bool QWinRTPlatformMessageDialogHelper::show(Qt::WindowFlags windowFlags, Qt::WindowModality windowModality, QWindow *parent)
-{
-    Q_UNUSED(windowFlags)
-    Q_UNUSED(windowModality)
-    Q_UNUSED(parent)
-
-    QSharedPointer<QMessageDialogOptions> options = this->options();
-
-    const QString informativeText = options->informativeText();
-    const QString title = options->windowTitle();
-    const QString text = informativeText.isEmpty() ? options->text() : (options->text() + QLatin1Char('\n') + informativeText);
-
-
-    ComPtr<IMessageDialogFactory> dialogFactory;
-    if (FAILED(GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_UI_Popups_MessageDialog).Get(), &dialogFactory)))
-        return false;
-
-    ComPtr<IUICommandFactory> commandFactory;
-    if (FAILED(GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_UI_Popups_UICommand).Get(), &commandFactory)))
-        return false;
-
-    HString nativeText;
-    nativeText.Set(reinterpret_cast<LPCWSTR>(text.utf16()), text.size());
-    ComPtr<IMessageDialog> dialog;
-
-    if (!title.isEmpty()) {
-        HString nativeTitle;
-        nativeTitle.Set(reinterpret_cast<LPCWSTR>(title.utf16()), title.size());
-        if (FAILED(dialogFactory->CreateWithTitle(nativeText.Get(), nativeTitle.Get(), &dialog)))
-            return false;
-    } else {
-        if (FAILED(dialogFactory->Create(nativeText.Get(), &dialog)))
-            return false;
-    }
-
-    // Add Buttons
-    ComPtr<IVector<IUICommand*> > dialogCommands;
-    if (FAILED(dialog->get_Commands(&dialogCommands)))
-        return false;
-
-    // If no button is specified we need to create one to get close notification
-    int buttons = options->standardButtons();
-    if (buttons == 0)
-        buttons = QPlatformDialogHelper::Ok;
-
-    for (int i = QPlatformDialogHelper::FirstButton; i < QPlatformDialogHelper::LastButton; i<<=1) {
-        if (buttons & i) {
-            // Add native command
-            const QString label = QGuiApplicationPrivate::platformTheme()->standardButtonText(i);
-
-            HString hLabel;
-            hLabel.Set(reinterpret_cast<LPCWSTR>(label.utf16()), label.size());
-
-            ABI::Windows::UI::Popups::IUICommand *command;
-            if (FAILED(commandFactory->CreateWithHandler(hLabel.Get(),
-                                                         Callback<IUICommandInvokedHandler>(this, &QWinRTPlatformMessageDialogHelper::onInvoked).Get(),
-                                                         &command)))
-                return false;
-            dialogCommands->Append(command);
-        }
-    }
-
-    ComPtr<IAsyncOperation<IUICommand*> > op;
-    if (FAILED(dialog->ShowAsync(&op)))
-        return false;
-
-    m_shown = true;
-    if (FAILED(op.As(&m_info->info))) {
-        m_shown = false;
-        // The dialog is shown already, so we cannot return false
-        qWarning("Failed to acquire AsyncInfo for MessageDialog");
-    }
-    return true;
-}
-
-void QWinRTPlatformMessageDialogHelper::hide()
-{
-    if (!m_shown)
-        return;
-
-    m_info->info->Cancel();
-    m_shown = false;
-}
-
-HRESULT QWinRTPlatformMessageDialogHelper::onInvoked(ABI::Windows::UI::Popups::IUICommand *command)
-{
-    HString hLabel;
-    UINT32 labelLength;
-    command->get_Label(hLabel.GetAddressOf());
-    PCWSTR rawString = hLabel.GetRawBuffer(&labelLength);
-    QString label = QString::fromWCharArray(rawString, labelLength);
-    int buttonId = -1;
-    for (int i = QPlatformDialogHelper::FirstButton; i < QPlatformDialogHelper::LastButton; i<<=1) {
-        if ( options()->standardButtons() & i ) {
-            if (QGuiApplicationPrivate::platformTheme()->standardButtonText(i) == label) {
-                buttonId = i;
-                break;
-            }
-        }
-    }
-    if (m_loop.isRunning())
-        m_loop.exit();
-
-    m_shown = false;
-
-    if (buttonId < 0) {
-        emit reject();
-        return S_OK;
-    }
-
-    QPlatformDialogHelper::StandardButton standardButton = static_cast<QPlatformDialogHelper::StandardButton>(buttonId);
-    QPlatformDialogHelper::ButtonRole role = QPlatformDialogHelper::buttonRole(standardButton);
-    emit clicked(standardButton, role);
-    return S_OK;
-}
-
-QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtscreen.cpp b/src/plugins/platforms/winrt/qwinrtscreen.cpp
index f948cf9924..3933902ae3 100644
--- a/src/plugins/platforms/winrt/qwinrtscreen.cpp
+++ b/src/plugins/platforms/winrt/qwinrtscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,6 +43,7 @@
 #include <QtPlatformSupport/private/qeglconvenience_p.h>
 #include <qpa/qwindowsysteminterface.h>
 #include <QtCore/qt_windows.h>
+#include <QtCore/qfunctions_winrt.h>
 
 #include <wrl.h>
 #include <windows.system.h>
@@ -93,11 +86,7 @@ typedef ITypedEventHandler<CoreWindow*, PointerEventArgs*> PointerHandler;
 typedef ITypedEventHandler<CoreWindow*, WindowSizeChangedEventArgs*> SizeChangedHandler;
 typedef ITypedEventHandler<CoreWindow*, VisibilityChangedEventArgs*> VisibilityChangedHandler;
 typedef ITypedEventHandler<CoreWindow*, AutomationProviderRequestedEventArgs*> AutomationProviderRequestedHandler;
-#if _MSC_VER <=1700
-typedef IDisplayPropertiesEventHandler DisplayInformationHandler;
-#else
 typedef ITypedEventHandler<DisplayInformation*, IInspectable*> DisplayInformationHandler;
-#endif
 #ifdef Q_OS_WINPHONE
 typedef IEventHandler<BackPressedEventArgs*> BackPressedHandler;
 #endif
@@ -419,199 +408,268 @@ static inline Qt::Key qKeyFromCode(quint32 code, int mods)
     return static_cast<Qt::Key>(code & 0xff);
 }
 
-QWinRTScreen::QWinRTScreen(ICoreWindow *window)
-    : m_coreWindow(window)
-    , m_depth(32)
-    , m_format(QImage::Format_ARGB32_Premultiplied)
+typedef HRESULT (__stdcall ICoreApplication::*CoreApplicationCallbackRemover)(EventRegistrationToken);
+uint qHash(CoreApplicationCallbackRemover key) { void *ptr = *(void **)(&key); return qHash(ptr); }
+typedef HRESULT (__stdcall ICoreWindow::*CoreWindowCallbackRemover)(EventRegistrationToken);
+uint qHash(CoreWindowCallbackRemover key) { void *ptr = *(void **)(&key); return qHash(ptr); }
+typedef HRESULT (__stdcall IDisplayInformation::*DisplayCallbackRemover)(EventRegistrationToken);
+uint qHash(DisplayCallbackRemover key) { void *ptr = *(void **)(&key); return qHash(ptr); }
 #ifdef Q_OS_WINPHONE
-    , m_inputContext(new QWinRTInputContext(m_coreWindow))
-#else
-    , m_inputContext(Make<QWinRTInputContext>(m_coreWindow).Detach())
+typedef HRESULT (__stdcall IHardwareButtonsStatics::*HardwareButtonsCallbackRemover)(EventRegistrationToken);
+uint qHash(HardwareButtonsCallbackRemover key) { void *ptr = *(void **)(&key); return qHash(ptr); }
 #endif
-    , m_cursor(new QWinRTCursor(window))
-    , m_devicePixelRatio(1.0)
-    , m_orientation(Qt::PrimaryOrientation)
-    , m_touchDevice(Q_NULLPTR)
+
+class QWinRTScreenPrivate
 {
-    Rect rect;
-    window->get_Bounds(&rect);
-    m_geometry = QRectF(0, 0, rect.Width, rect.Height);
-
-    m_surfaceFormat.setAlphaBufferSize(0);
-    m_surfaceFormat.setRedBufferSize(8);
-    m_surfaceFormat.setGreenBufferSize(8);
-    m_surfaceFormat.setBlueBufferSize(8);
-
-    m_surfaceFormat.setRenderableType(QSurfaceFormat::OpenGLES);
-    m_surfaceFormat.setSamples(1);
-    m_surfaceFormat.setSwapBehavior(QSurfaceFormat::DoubleBuffer);
-    m_surfaceFormat.setDepthBufferSize(24);
-    m_surfaceFormat.setStencilBufferSize(8);
-
-    m_eglDisplay = eglGetDisplay(EGL_DEFAULT_DISPLAY);
-    if (m_eglDisplay == EGL_NO_DISPLAY)
-        qFatal("Qt WinRT platform plugin: failed to initialize EGL display.");
-
-    if (!eglInitialize(m_eglDisplay, NULL, NULL))
-        qFatal("Qt WinRT platform plugin: failed to initialize EGL. This can happen if you haven't included the D3D compiler DLL in your application package.");
-
-    // TODO: move this to Window
-    m_eglSurface = eglCreateWindowSurface(m_eglDisplay, q_configFromGLFormat(m_eglDisplay, m_surfaceFormat), window, NULL);
-    if (m_eglSurface == EGL_NO_SURFACE)
-        qFatal("Could not create EGL surface, error 0x%X", eglGetError());
-
-    // Event handlers mapped to QEvents
-    m_coreWindow->add_KeyDown(Callback<KeyHandler>(this, &QWinRTScreen::onKeyDown).Get(), &m_tokens[QEvent::KeyPress]);
-    m_coreWindow->add_KeyUp(Callback<KeyHandler>(this, &QWinRTScreen::onKeyUp).Get(), &m_tokens[QEvent::KeyRelease]);
-    m_coreWindow->add_CharacterReceived(Callback<CharacterReceivedHandler>(this, &QWinRTScreen::onCharacterReceived).Get(), &m_tokens[QEvent::User]);
-    m_coreWindow->add_PointerEntered(Callback<PointerHandler>(this, &QWinRTScreen::onPointerEntered).Get(), &m_tokens[QEvent::Enter]);
-    m_coreWindow->add_PointerExited(Callback<PointerHandler>(this, &QWinRTScreen::onPointerExited).Get(), &m_tokens[QEvent::Leave]);
-    m_coreWindow->add_PointerMoved(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &m_tokens[QEvent::MouseMove]);
-    m_coreWindow->add_PointerPressed(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &m_tokens[QEvent::MouseButtonPress]);
-    m_coreWindow->add_PointerReleased(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &m_tokens[QEvent::MouseButtonRelease]);
-    m_coreWindow->add_PointerWheelChanged(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &m_tokens[QEvent::Wheel]);
-    m_coreWindow->add_SizeChanged(Callback<SizeChangedHandler>(this, &QWinRTScreen::onSizeChanged).Get(), &m_tokens[QEvent::Resize]);
+public:
+    ComPtr<ICoreApplication> application;
+    ComPtr<ICoreWindow> coreWindow;
+    ComPtr<IDisplayInformation> displayInformation;
 #ifdef Q_OS_WINPHONE
     ComPtr<IHardwareButtonsStatics> hardwareButtons;
-    if (SUCCEEDED(GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Phone_UI_Input_HardwareButtons).Get(), &hardwareButtons)))
-        hardwareButtons->add_BackPressed(Callback<BackPressedHandler>(this, &QWinRTScreen::onBackButtonPressed).Get(), &m_tokens[QEvent::User]);
-#endif // Q_OS_WINPHONE
-
-    // Window event handlers
-    m_coreWindow->add_Activated(Callback<ActivatedHandler>(this, &QWinRTScreen::onActivated).Get(), &m_tokens[QEvent::WindowActivate]);
-    m_coreWindow->add_Closed(Callback<ClosedHandler>(this, &QWinRTScreen::onClosed).Get(), &m_tokens[QEvent::WindowDeactivate]);
-    m_coreWindow->add_VisibilityChanged(Callback<VisibilityChangedHandler>(this, &QWinRTScreen::onVisibilityChanged).Get(), &m_tokens[QEvent::Show]);
-    m_coreWindow->add_AutomationProviderRequested(Callback<AutomationProviderRequestedHandler>(this, &QWinRTScreen::onAutomationProviderRequested).Get(), &m_tokens[QEvent::InputMethodQuery]);
+#endif
 
-    // Orientation handling
-#if _MSC_VER<=1700
-    HRESULT hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayProperties).Get(),
-                                      &m_displayInformation);
+    QScopedPointer<QWinRTCursor> cursor;
+#ifdef Q_OS_WINPHONE
+    QScopedPointer<QWinRTInputContext> inputContext;
 #else
-    HRESULT hr = GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayInformation).Get(),
-                                      &m_displayInformationFactory);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get display information factory.");
-        return;
-    }
+    ComPtr<QWinRTInputContext> inputContext;
+#endif
 
-    hr = m_displayInformationFactory->GetForCurrentView(&m_displayInformation);
+    QSizeF logicalSize;
+    QSurfaceFormat surfaceFormat;
+    qreal logicalDpi;
+    QDpi physicalDpi;
+    qreal scaleFactor;
+    Qt::ScreenOrientation nativeOrientation;
+    Qt::ScreenOrientation orientation;
+    QList<QWindow *> visibleWindows;
+#ifndef Q_OS_WINPHONE
+    QHash<quint32, QPair<Qt::Key, QString>> activeKeys;
 #endif
+    QTouchDevice *touchDevice;
+    QHash<quint32, QWindowSystemInterface::TouchPoint> touchPoints;
 
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get display information for the current view.");
-        return;
-    }
+    EGLDisplay eglDisplay;
+    EGLSurface eglSurface;
 
-    // Set native orientation
-    DisplayOrientations displayOrientation;
-    hr = m_displayInformation->get_NativeOrientation(&displayOrientation);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get native orientation.");
-        return;
-    }
-
-    m_nativeOrientation = static_cast<Qt::ScreenOrientation>(static_cast<int>(qtOrientationsFromNative(displayOrientation)));
+    QHash<CoreApplicationCallbackRemover, EventRegistrationToken> applicationTokens;
+    QHash<CoreWindowCallbackRemover, EventRegistrationToken> windowTokens;
+    QHash<DisplayCallbackRemover, EventRegistrationToken> displayTokens;
+#ifdef Q_OS_WINPHONE
+    QHash<HardwareButtonsCallbackRemover, EventRegistrationToken> buttonsTokens;
+#endif
+};
 
-    hr = m_displayInformation->add_OrientationChanged(Callback<DisplayInformationHandler>(this, &QWinRTScreen::onOrientationChanged).Get(),
-                                                      &m_tokens[QEvent::OrientationChange]);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to add orientation change callback.");
-        return;
-    }
+QWinRTScreen::QWinRTScreen()
+    : d_ptr(new QWinRTScreenPrivate)
+{
+    Q_D(QWinRTScreen);
+    d->orientation = Qt::PrimaryOrientation;
+    d->touchDevice = Q_NULLPTR;
+
+    // Obtain the WinRT Application, view, and window
+    HRESULT hr;
+    hr = RoGetActivationFactory(Wrappers::HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
+                                IID_PPV_ARGS(&d->application));
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->application->add_Suspending(Callback<SuspendHandler>(this, &QWinRTScreen::onSuspended).Get(), &d->applicationTokens[&ICoreApplication::remove_Resuming]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->application->add_Resuming(Callback<ResumeHandler>(this, &QWinRTScreen::onResume).Get(), &d->applicationTokens[&ICoreApplication::remove_Resuming]);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    ComPtr<ICoreApplicationView> view;
+    hr = d->application->GetCurrentView(&view);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = view->get_CoreWindow(&d->coreWindow);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->Activate();
+    Q_ASSERT_SUCCEEDED(hr);
 
-#if _MSC_VER<=1700
-    hr = m_displayInformation->add_LogicalDpiChanged(Callback<DisplayInformationHandler>(this, &QWinRTScreen::onDpiChanged).Get(),
-                                                     &m_tokens[QEvent::Type(QEvent::User + 1)]);
+#ifdef Q_OS_WINPHONE
+    d->inputContext.reset(new QWinRTInputContext(d->coreWindow.Get()));
 #else
-    hr = m_displayInformation->add_DpiChanged(Callback<DisplayInformationHandler>(this, &QWinRTScreen::onDpiChanged).Get(),
-                                              &m_tokens[QEvent::Type(QEvent::User + 1)]);
+    d->inputContext = Make<QWinRTInputContext>(d->coreWindow.Get());
 #endif
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to add logical dpi change callback.");
-        return;
-    }
+
+    Rect rect;
+    hr = d->coreWindow->get_Bounds(&rect);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->logicalSize = QSizeF(rect.Width, rect.Height);
+
+    d->surfaceFormat.setAlphaBufferSize(0);
+    d->surfaceFormat.setRedBufferSize(8);
+    d->surfaceFormat.setGreenBufferSize(8);
+    d->surfaceFormat.setBlueBufferSize(8);
+    d->surfaceFormat.setDepthBufferSize(24);
+    d->surfaceFormat.setStencilBufferSize(8);
+    d->surfaceFormat.setRenderableType(QSurfaceFormat::OpenGLES);
+    d->surfaceFormat.setSamples(1);
+    d->surfaceFormat.setSwapBehavior(QSurfaceFormat::DoubleBuffer);
+
+    hr = d->coreWindow->add_KeyDown(Callback<KeyHandler>(this, &QWinRTScreen::onKeyDown).Get(), &d->windowTokens[&ICoreWindow::remove_KeyDown]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_KeyUp(Callback<KeyHandler>(this, &QWinRTScreen::onKeyUp).Get(), &d->windowTokens[&ICoreWindow::remove_KeyUp]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_CharacterReceived(Callback<CharacterReceivedHandler>(this, &QWinRTScreen::onCharacterReceived).Get(), &d->windowTokens[&ICoreWindow::remove_CharacterReceived]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_PointerEntered(Callback<PointerHandler>(this, &QWinRTScreen::onPointerEntered).Get(), &d->windowTokens[&ICoreWindow::remove_PointerEntered]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_PointerExited(Callback<PointerHandler>(this, &QWinRTScreen::onPointerExited).Get(), &d->windowTokens[&ICoreWindow::remove_PointerExited]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_PointerMoved(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &d->windowTokens[&ICoreWindow::remove_PointerMoved]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_PointerPressed(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &d->windowTokens[&ICoreWindow::remove_PointerPressed]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_PointerReleased(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &d->windowTokens[&ICoreWindow::remove_PointerReleased]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_PointerWheelChanged(Callback<PointerHandler>(this, &QWinRTScreen::onPointerUpdated).Get(), &d->windowTokens[&ICoreWindow::remove_PointerWheelChanged]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_SizeChanged(Callback<SizeChangedHandler>(this, &QWinRTScreen::onSizeChanged).Get(), &d->windowTokens[&ICoreWindow::remove_SizeChanged]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_Activated(Callback<ActivatedHandler>(this, &QWinRTScreen::onActivated).Get(), &d->windowTokens[&ICoreWindow::remove_Activated]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_Closed(Callback<ClosedHandler>(this, &QWinRTScreen::onClosed).Get(), &d->windowTokens[&ICoreWindow::remove_Closed]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_VisibilityChanged(Callback<VisibilityChangedHandler>(this, &QWinRTScreen::onVisibilityChanged).Get(), &d->windowTokens[&ICoreWindow::remove_VisibilityChanged]);
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->coreWindow->add_AutomationProviderRequested(Callback<AutomationProviderRequestedHandler>(this, &QWinRTScreen::onAutomationProviderRequested).Get(), &d->windowTokens[&ICoreWindow::remove_AutomationProviderRequested]);
+    Q_ASSERT_SUCCEEDED(hr);
+#ifdef Q_OS_WINPHONE
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Phone_UI_Input_HardwareButtons).Get(), IID_PPV_ARGS(&d->hardwareButtons));
+    Q_ASSERT_SUCCEEDED(hr);
+    hr = d->hardwareButtons->add_BackPressed(Callback<BackPressedHandler>(this, &QWinRTScreen::onBackButtonPressed).Get(), &d->buttonsTokens[&IHardwareButtonsStatics::remove_BackPressed]);
+    Q_ASSERT_SUCCEEDED(hr);
+#endif // Q_OS_WINPHONE
+
+    // Orientation handling
+    ComPtr<IDisplayInformationStatics> displayInformationStatics;
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Graphics_Display_DisplayInformation).Get(),
+                                IID_PPV_ARGS(&displayInformationStatics));
+    Q_ASSERT_SUCCEEDED(hr);
+
+    hr = displayInformationStatics->GetForCurrentView(&d->displayInformation);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    // Set native orientation
+    DisplayOrientations displayOrientation;
+    hr = d->displayInformation->get_NativeOrientation(&displayOrientation);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->nativeOrientation = static_cast<Qt::ScreenOrientation>(static_cast<int>(qtOrientationsFromNative(displayOrientation)));
+
+    hr = d->displayInformation->add_OrientationChanged(Callback<DisplayInformationHandler>(this, &QWinRTScreen::onOrientationChanged).Get(), &d->displayTokens[&IDisplayInformation::remove_OrientationChanged]);
+    Q_ASSERT_SUCCEEDED(hr);
+
+    hr = d->displayInformation->add_DpiChanged(Callback<DisplayInformationHandler>(this, &QWinRTScreen::onDpiChanged).Get(), &d->displayTokens[&IDisplayInformation::remove_DpiChanged]);
+    Q_ASSERT_SUCCEEDED(hr);
 
     // Set initial orientation & pixel density
-#if _MSC_VER<=1700
-    onOrientationChanged(Q_NULLPTR);
-    onDpiChanged(Q_NULLPTR);
-#else
-    onOrientationChanged(Q_NULLPTR, Q_NULLPTR);
     onDpiChanged(Q_NULLPTR, Q_NULLPTR);
-#endif
-    setOrientationUpdateMask(m_nativeOrientation);
+    d->orientation = d->nativeOrientation;
+    onOrientationChanged(Q_NULLPTR, Q_NULLPTR);
 
-    if (SUCCEEDED(RoGetActivationFactory(Wrappers::HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
-                                         IID_PPV_ARGS(&m_application)))) {
-        m_application->add_Suspending(Callback<SuspendHandler>(this, &QWinRTScreen::onSuspended).Get(), &m_suspendTokens[Qt::ApplicationSuspended]);
-        m_application->add_Resuming(Callback<ResumeHandler>(this, &QWinRTScreen::onResume).Get(), &m_suspendTokens[Qt::ApplicationHidden]);
-    }
+    d->eglDisplay = eglGetDisplay(d->displayInformation.Get());
+    if (d->eglDisplay == EGL_NO_DISPLAY)
+        qCritical("Failed to initialize EGL display: 0x%x", eglGetError());
+
+    if (!eglInitialize(d->eglDisplay, NULL, NULL))
+        qCritical("Failed to initialize EGL: 0x%x", eglGetError());
+
+    d->eglSurface = eglCreateWindowSurface(d->eglDisplay, q_configFromGLFormat(d->eglDisplay, d->surfaceFormat), d->coreWindow.Get(), NULL);
+    if (d->eglSurface == EGL_NO_SURFACE)
+        qCritical("Failed to create EGL window surface: 0x%x", eglGetError());
+}
+
+QWinRTScreen::~QWinRTScreen()
+{
+    Q_D(QWinRTScreen);
+
+    // Unregister callbacks
+    for (QHash<CoreApplicationCallbackRemover, EventRegistrationToken>::const_iterator i = d->applicationTokens.begin(); i != d->applicationTokens.end(); ++i)
+        (d->application.Get()->*i.key())(i.value());
+    for (QHash<CoreWindowCallbackRemover, EventRegistrationToken>::const_iterator i = d->windowTokens.begin(); i != d->windowTokens.end(); ++i)
+        (d->coreWindow.Get()->*i.key())(i.value());
+    for (QHash<DisplayCallbackRemover, EventRegistrationToken>::const_iterator i = d->displayTokens.begin(); i != d->displayTokens.end(); ++i)
+        (d->displayInformation.Get()->*i.key())(i.value());
+#ifdef Q_OS_WINPHONE
+    for (QHash<HardwareButtonsCallbackRemover, EventRegistrationToken>::const_iterator i = d->buttonsTokens.begin(); i != d->buttonsTokens.end(); ++i)
+        (d->hardwareButtons.Get()->*i.key())(i.value());
+#endif
 }
 
 QRect QWinRTScreen::geometry() const
 {
-    return m_geometry.toRect();
+    Q_D(const QWinRTScreen);
+    return QRect(QPoint(), (d->logicalSize * d->scaleFactor).toSize());
 }
 
 int QWinRTScreen::depth() const
 {
-    return m_depth;
+    return 32;
 }
 
 QImage::Format QWinRTScreen::format() const
 {
-    return m_format;
+    return QImage::Format_ARGB32_Premultiplied;
 }
 
 QSurfaceFormat QWinRTScreen::surfaceFormat() const
 {
-    return m_surfaceFormat;
+    Q_D(const QWinRTScreen);
+    return d->surfaceFormat;
 }
 
 QSizeF QWinRTScreen::physicalSize() const
 {
-    return m_geometry.size() / m_dpi * qreal(25.4);
+    Q_D(const QWinRTScreen);
+    return QSizeF(d->logicalSize.width() * d->scaleFactor / d->physicalDpi.first * qreal(25.4),
+                  d->logicalSize.height() * d->scaleFactor / d->physicalDpi.second * qreal(25.4));
 }
 
 QDpi QWinRTScreen::logicalDpi() const
 {
-    return QDpi(m_dpi, m_dpi);
-}
-
-qreal QWinRTScreen::devicePixelRatio() const
-{
-    return m_devicePixelRatio;
+    Q_D(const QWinRTScreen);
+    return QDpi(d->logicalDpi, d->logicalDpi);
 }
 
 QWinRTInputContext *QWinRTScreen::inputContext() const
 {
-    return m_inputContext;
+    Q_D(const QWinRTScreen);
+#ifdef Q_OS_WINPHONE
+    return d->inputContext.data();
+#else
+    return d->inputContext.Get();
+#endif
 }
 
 QPlatformCursor *QWinRTScreen::cursor() const
 {
-    return m_cursor;
+    Q_D(const QWinRTScreen);
+    if (!d->cursor)
+        const_cast<QWinRTScreenPrivate *>(d)->cursor.reset(new QWinRTCursor);
+    return d->cursor.data();
 }
 
 Qt::KeyboardModifiers QWinRTScreen::keyboardModifiers() const
 {
+    Q_D(const QWinRTScreen);
+
     Qt::KeyboardModifiers mods;
     CoreVirtualKeyStates mod;
-    m_coreWindow->GetAsyncKeyState(VirtualKey_Shift, &mod);
+    d->coreWindow->GetAsyncKeyState(VirtualKey_Shift, &mod);
     if (mod == CoreVirtualKeyStates_Down)
         mods |= Qt::ShiftModifier;
-    m_coreWindow->GetAsyncKeyState(VirtualKey_Menu, &mod);
+    d->coreWindow->GetAsyncKeyState(VirtualKey_Menu, &mod);
     if (mod == CoreVirtualKeyStates_Down)
         mods |= Qt::AltModifier;
-    m_coreWindow->GetAsyncKeyState(VirtualKey_Control, &mod);
+    d->coreWindow->GetAsyncKeyState(VirtualKey_Control, &mod);
     if (mod == CoreVirtualKeyStates_Down)
         mods |= Qt::ControlModifier;
-    m_coreWindow->GetAsyncKeyState(VirtualKey_LeftWindows, &mod);
+    d->coreWindow->GetAsyncKeyState(VirtualKey_LeftWindows, &mod);
     if (mod == CoreVirtualKeyStates_Down) {
         mods |= Qt::MetaModifier;
     } else {
-        m_coreWindow->GetAsyncKeyState(VirtualKey_RightWindows, &mod);
+        d->coreWindow->GetAsyncKeyState(VirtualKey_RightWindows, &mod);
         if (mod == CoreVirtualKeyStates_Down)
             mods |= Qt::MetaModifier;
     }
@@ -620,56 +678,55 @@ Qt::KeyboardModifiers QWinRTScreen::keyboardModifiers() const
 
 Qt::ScreenOrientation QWinRTScreen::nativeOrientation() const
 {
-    return m_nativeOrientation;
+    Q_D(const QWinRTScreen);
+    return d->nativeOrientation;
 }
 
 Qt::ScreenOrientation QWinRTScreen::orientation() const
 {
-    return m_orientation;
-}
-
-void QWinRTScreen::setOrientationUpdateMask(Qt::ScreenOrientations mask)
-{
-#if _MSC_VER<=1700
-    m_displayInformation->put_AutoRotationPreferences(nativeOrientationsFromQt(mask));
-#else
-    m_displayInformationFactory->put_AutoRotationPreferences(nativeOrientationsFromQt(mask));
-#endif
+    Q_D(const QWinRTScreen);
+    return d->orientation;
 }
 
 ICoreWindow *QWinRTScreen::coreWindow() const
 {
-    return m_coreWindow;
+    Q_D(const QWinRTScreen);
+    return d->coreWindow.Get();
 }
 
 EGLDisplay QWinRTScreen::eglDisplay() const
 {
-    return m_eglDisplay;
+    Q_D(const QWinRTScreen);
+    return d->eglDisplay;
 }
 
 EGLSurface QWinRTScreen::eglSurface() const
 {
-    return m_eglSurface;
+    Q_D(const QWinRTScreen);
+    return d->eglSurface;
 }
 
 QWindow *QWinRTScreen::topWindow() const
 {
-    return m_visibleWindows.isEmpty() ? 0 : m_visibleWindows.first();
+    Q_D(const QWinRTScreen);
+    return d->visibleWindows.isEmpty() ? 0 : d->visibleWindows.first();
 }
 
 void QWinRTScreen::addWindow(QWindow *window)
 {
+    Q_D(QWinRTScreen);
     if (window == topWindow())
         return;
-    m_visibleWindows.prepend(window);
+    d->visibleWindows.prepend(window);
     QWindowSystemInterface::handleWindowActivated(window, Qt::OtherFocusReason);
     handleExpose();
 }
 
 void QWinRTScreen::removeWindow(QWindow *window)
 {
+    Q_D(QWinRTScreen);
     const bool wasTopWindow = window == topWindow();
-    if (!m_visibleWindows.removeAll(window))
+    if (!d->visibleWindows.removeAll(window))
         return;
     if (wasTopWindow)
         QWindowSystemInterface::handleWindowActivated(window, Qt::OtherFocusReason);
@@ -678,17 +735,19 @@ void QWinRTScreen::removeWindow(QWindow *window)
 
 void QWinRTScreen::raise(QWindow *window)
 {
-    m_visibleWindows.removeAll(window);
+    Q_D(QWinRTScreen);
+    d->visibleWindows.removeAll(window);
     addWindow(window);
 }
 
 void QWinRTScreen::lower(QWindow *window)
 {
+    Q_D(QWinRTScreen);
     const bool wasTopWindow = window == topWindow();
-    if (wasTopWindow && m_visibleWindows.size() == 1)
+    if (wasTopWindow && d->visibleWindows.size() == 1)
         return;
-    m_visibleWindows.removeAll(window);
-    m_visibleWindows.append(window);
+    d->visibleWindows.removeAll(window);
+    d->visibleWindows.append(window);
     if (wasTopWindow)
         QWindowSystemInterface::handleWindowActivated(window, Qt::OtherFocusReason);
     handleExpose();
@@ -696,18 +755,17 @@ void QWinRTScreen::lower(QWindow *window)
 
 void QWinRTScreen::handleExpose()
 {
-    if (m_visibleWindows.isEmpty())
+    Q_D(QWinRTScreen);
+    if (d->visibleWindows.isEmpty())
         return;
-    QList<QWindow *>::const_iterator it = m_visibleWindows.constBegin();
-    QWindowSystemInterface::handleExposeEvent(*it, m_geometry.toRect());
-    while (++it != m_visibleWindows.constEnd())
+    QList<QWindow *>::const_iterator it = d->visibleWindows.constBegin();
+    QWindowSystemInterface::handleExposeEvent(*it, geometry());
+    while (++it != d->visibleWindows.constEnd())
         QWindowSystemInterface::handleExposeEvent(*it, QRegion());
-    QWindowSystemInterface::flushWindowSystemEvents();
 }
 
-HRESULT QWinRTScreen::onKeyDown(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IKeyEventArgs *args)
+HRESULT QWinRTScreen::onKeyDown(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IKeyEventArgs *args)
 {
-    Q_UNUSED(window);
     VirtualKey virtualKey;
     args->get_VirtualKey(&virtualKey);
     Qt::Key key = qKeyFromVirtual(virtualKey);
@@ -718,14 +776,14 @@ HRESULT QWinRTScreen::onKeyDown(ABI::Windows::UI::Core::ICoreWindow *window, ABI
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onKeyUp(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IKeyEventArgs *args)
+HRESULT QWinRTScreen::onKeyUp(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IKeyEventArgs *args)
 {
-    Q_UNUSED(window);
     Qt::KeyboardModifiers mods = keyboardModifiers();
 #ifndef Q_OS_WINPHONE
+    Q_D(QWinRTScreen);
     CorePhysicalKeyStatus status; // Look for a pressed character key
-    if (SUCCEEDED(args->get_KeyStatus(&status)) && m_activeKeys.contains(status.ScanCode)) {
-        QPair<Qt::Key, QString> keyStatus = m_activeKeys.take(status.ScanCode);
+    if (SUCCEEDED(args->get_KeyStatus(&status)) && d->activeKeys.contains(status.ScanCode)) {
+        QPair<Qt::Key, QString> keyStatus = d->activeKeys.take(status.ScanCode);
         QWindowSystemInterface::handleKeyEvent(topWindow(), QEvent::KeyRelease,
                                                keyStatus.first, mods, keyStatus.second);
         return S_OK;
@@ -738,10 +796,8 @@ HRESULT QWinRTScreen::onKeyUp(ABI::Windows::UI::Core::ICoreWindow *window, ABI::
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onCharacterReceived(ICoreWindow *window, ICharacterReceivedEventArgs *args)
+HRESULT QWinRTScreen::onCharacterReceived(ICoreWindow *, ICharacterReceivedEventArgs *args)
 {
-    Q_UNUSED(window);
-
     quint32 keyCode;
     args->get_KeyCode(&keyCode);
     // Don't generate character events for non-printables; the meta key stage is enough
@@ -753,9 +809,10 @@ HRESULT QWinRTScreen::onCharacterReceived(ICoreWindow *window, ICharacterReceive
     QString text = QChar(keyCode);
     QWindowSystemInterface::handleKeyEvent(topWindow(), QEvent::KeyPress, key, mods, text);
 #ifndef Q_OS_WINPHONE
+    Q_D(QWinRTScreen);
     CorePhysicalKeyStatus status; // Defer release to onKeyUp for physical keys
     if (SUCCEEDED(args->get_KeyStatus(&status)) && !status.IsKeyReleased) {
-        m_activeKeys.insert(status.ScanCode, qMakePair(key, text));
+        d->activeKeys.insert(status.ScanCode, qMakePair(key, text));
         return S_OK;
     }
 #endif // !Q_OS_WINPHONE
@@ -763,42 +820,39 @@ HRESULT QWinRTScreen::onCharacterReceived(ICoreWindow *window, ICharacterReceive
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onPointerEntered(ICoreWindow *window, IPointerEventArgs *args)
+HRESULT QWinRTScreen::onPointerEntered(ICoreWindow *, IPointerEventArgs *args)
 {
-    Q_UNUSED(window);
-    IPointerPoint *pointerPoint;
+    Q_D(QWinRTScreen);
+
+    ComPtr<IPointerPoint> pointerPoint;
     if (SUCCEEDED(args->get_CurrentPoint(&pointerPoint))) {
         // Assumes full-screen window
         Point point;
         pointerPoint->get_Position(&point);
-        QPoint pos(point.X, point.Y);
+        QPoint pos(point.X * d->scaleFactor, point.Y * d->scaleFactor);
 
         QWindowSystemInterface::handleEnterEvent(topWindow(), pos, pos);
-        pointerPoint->Release();
     }
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onPointerExited(ICoreWindow *window, IPointerEventArgs *args)
+HRESULT QWinRTScreen::onPointerExited(ICoreWindow *, IPointerEventArgs *)
 {
-    Q_UNUSED(window);
-    Q_UNUSED(args);
     QWindowSystemInterface::handleLeaveEvent(0);
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *window, IPointerEventArgs *args)
+HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *, IPointerEventArgs *args)
 {
-    Q_UNUSED(window);
-
-    IPointerPoint *pointerPoint;
+    Q_D(QWinRTScreen);
+    ComPtr<IPointerPoint> pointerPoint;
     if (FAILED(args->get_CurrentPoint(&pointerPoint)))
         return E_INVALIDARG;
 
     // Common traits - point, modifiers, properties
     Point point;
     pointerPoint->get_Position(&point);
-    QPointF pos(point.X, point.Y);
+    QPointF pos(point.X * d->scaleFactor, point.Y * d->scaleFactor);
 
     VirtualKeyModifiers modifiers;
     args->get_KeyModifiers(&modifiers);
@@ -812,27 +866,18 @@ HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *window, IPointerEventArgs *a
     if (modifiers & VirtualKeyModifiers_Windows)
         mods |= Qt::MetaModifier;
 
-    IPointerPointProperties *properties;
+    ComPtr<IPointerPointProperties> properties;
     if (FAILED(pointerPoint->get_Properties(&properties)))
         return E_INVALIDARG;
 
-    PointerDeviceType pointerDeviceType;
-#if defined(Q_OS_WINPHONE) && _MSC_VER <= 1700
-    pointerDeviceType = PointerDeviceType_Touch;
-#else
     ComPtr<IPointerDevice> pointerDevice;
     HRESULT hr = pointerPoint->get_PointerDevice(&pointerDevice);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get pointer device.");
-        return S_OK;
-    }
+    RETURN_OK_IF_FAILED("Failed to get pointer device.");
 
+    PointerDeviceType pointerDeviceType;
     hr = pointerDevice->get_PointerDeviceType(&pointerDeviceType);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get pointer device type.");
-        return S_OK;
-    }
-#endif
+    RETURN_OK_IF_FAILED("Failed to get pointer device type.");
+
     switch (pointerDeviceType) {
     case PointerDeviceType_Mouse: {
         qint32 delta;
@@ -872,12 +917,12 @@ HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *window, IPointerEventArgs *a
         break;
     }
     case PointerDeviceType_Touch: {
-        if (!m_touchDevice) {
-            m_touchDevice = new QTouchDevice;
-            m_touchDevice->setName(QStringLiteral("WinRTTouchScreen"));
-            m_touchDevice->setType(QTouchDevice::TouchScreen);
-            m_touchDevice->setCapabilities(QTouchDevice::Position | QTouchDevice::Area | QTouchDevice::Pressure | QTouchDevice::NormalizedPosition);
-            QWindowSystemInterface::registerTouchDevice(m_touchDevice);
+        if (!d->touchDevice) {
+            d->touchDevice = new QTouchDevice;
+            d->touchDevice->setName(QStringLiteral("WinRTTouchScreen"));
+            d->touchDevice->setType(QTouchDevice::TouchScreen);
+            d->touchDevice->setCapabilities(QTouchDevice::Position | QTouchDevice::Area | QTouchDevice::Pressure | QTouchDevice::NormalizedPosition);
+            QWindowSystemInterface::registerTouchDevice(d->touchDevice);
         }
 
         quint32 id;
@@ -889,8 +934,8 @@ HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *window, IPointerEventArgs *a
         float pressure;
         properties->get_Pressure(&pressure);
 
-        QHash<quint32, QWindowSystemInterface::TouchPoint>::iterator it = m_touchPoints.find(id);
-        if (it != m_touchPoints.end()) {
+        QHash<quint32, QWindowSystemInterface::TouchPoint>::iterator it = d->touchPoints.find(id);
+        if (it != d->touchPoints.end()) {
             boolean isPressed;
 #ifndef Q_OS_WINPHONE
             pointerPoint->get_IsInContact(&isPressed);
@@ -899,20 +944,21 @@ HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *window, IPointerEventArgs *a
 #endif
             it.value().state = isPressed ? Qt::TouchPointMoved : Qt::TouchPointReleased;
         } else {
-            it = m_touchPoints.insert(id, QWindowSystemInterface::TouchPoint());
+            it = d->touchPoints.insert(id, QWindowSystemInterface::TouchPoint());
             it.value().state = Qt::TouchPointPressed;
             it.value().id = id;
         }
-        it.value().area = QRectF(area.X, area.Y, area.Width, area.Height);
-        it.value().normalPosition = QPointF(pos.x()/m_geometry.width(), pos.y()/m_geometry.height());
+        it.value().area = QRectF(area.X * d->scaleFactor, area.Y * d->scaleFactor,
+                                 area.Width * d->scaleFactor, area.Height * d->scaleFactor);
+        it.value().normalPosition = QPointF(point.X/d->logicalSize.width(), point.Y/d->logicalSize.height());
         it.value().pressure = pressure;
 
-        QWindowSystemInterface::handleTouchEvent(topWindow(), m_touchDevice, m_touchPoints.values(), mods);
+        QWindowSystemInterface::handleTouchEvent(topWindow(), d->touchDevice, d->touchPoints.values(), mods);
 
         // Remove released points, station others
-        for (QHash<quint32, QWindowSystemInterface::TouchPoint>::iterator i = m_touchPoints.begin(); i != m_touchPoints.end();) {
+        for (QHash<quint32, QWindowSystemInterface::TouchPoint>::iterator i = d->touchPoints.begin(); i != d->touchPoints.end();) {
             if (i.value().state == Qt::TouchPointReleased)
-                i = m_touchPoints.erase(i);
+                i = d->touchPoints.erase(i);
             else
                 (i++).value().state = Qt::TouchPointStationary;
         }
@@ -950,46 +996,46 @@ HRESULT QWinRTScreen::onPointerUpdated(ICoreWindow *window, IPointerEventArgs *a
     }
     }
 
-    properties->Release();
-    pointerPoint->Release();
-
     return S_OK;
 }
 
 HRESULT QWinRTScreen::onAutomationProviderRequested(ICoreWindow *, IAutomationProviderRequestedEventArgs *args)
 {
 #ifndef Q_OS_WINPHONE
-    args->put_AutomationProvider(m_inputContext);
+    Q_D(const QWinRTScreen);
+    args->put_AutomationProvider(d->inputContext.Get());
 #else
     Q_UNUSED(args)
 #endif
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onSizeChanged(ICoreWindow *window, IWindowSizeChangedEventArgs *args)
+HRESULT QWinRTScreen::onSizeChanged(ICoreWindow *, IWindowSizeChangedEventArgs *args)
 {
-    Q_UNUSED(window);
+    Q_D(QWinRTScreen);
 
     Size size;
-    if (FAILED(args->get_Size(&size))) {
-        qWarning(Q_FUNC_INFO ": failed to get size");
+    HRESULT hr = args->get_Size(&size);
+    RETURN_OK_IF_FAILED("Failed to get window size.");
+
+    QSizeF logicalSize = QSizeF(size.Width, size.Height);
+    if (d->logicalSize == logicalSize)
         return S_OK;
-    }
 
     // Regardless of state, all top-level windows are viewport-sized - this might change if
     // a more advanced compositor is written.
-    m_geometry.setSize(QSizeF(size.Width, size.Height));
-    QWindowSystemInterface::handleScreenGeometryChange(screen(), m_geometry.toRect());
-    QWindowSystemInterface::handleScreenAvailableGeometryChange(screen(), m_geometry.toRect());
+    d->logicalSize = logicalSize;
+    const QRect newGeometry = geometry();
+    QWindowSystemInterface::handleScreenGeometryChange(screen(), newGeometry, newGeometry);
     QPlatformScreen::resizeMaximizedWindows();
     handleExpose();
 
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onActivated(ICoreWindow *window, IWindowActivatedEventArgs *args)
+HRESULT QWinRTScreen::onActivated(ICoreWindow *, IWindowActivatedEventArgs *args)
 {
-    Q_UNUSED(window);
+    Q_D(QWinRTScreen);
 
     CoreWindowActivationState activationState;
     args->get_WindowActivationState(&activationState);
@@ -999,7 +1045,7 @@ HRESULT QWinRTScreen::onActivated(ICoreWindow *window, IWindowActivatedEventArgs
     }
 
     // Activate topWindow
-    if (!m_visibleWindows.isEmpty()) {
+    if (!d->visibleWindows.isEmpty()) {
         Qt::FocusReason focusReason = activationState == CoreWindowActivationState_PointerActivated
                 ? Qt::MouseFocusReason : Qt::ActiveWindowFocusReason;
         QWindowSystemInterface::handleWindowActivated(topWindow(), focusReason);
@@ -1022,21 +1068,15 @@ HRESULT QWinRTScreen::onResume(IInspectable *, IInspectable *)
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onClosed(ICoreWindow *window, ICoreWindowEventArgs *args)
+HRESULT QWinRTScreen::onClosed(ICoreWindow *, ICoreWindowEventArgs *)
 {
-    Q_UNUSED(window);
-    Q_UNUSED(args);
-
     foreach (QWindow *w, QGuiApplication::topLevelWindows())
         QWindowSystemInterface::handleCloseEvent(w);
     return S_OK;
 }
 
-HRESULT QWinRTScreen::onVisibilityChanged(ICoreWindow *window, IVisibilityChangedEventArgs *args)
+HRESULT QWinRTScreen::onVisibilityChanged(ICoreWindow *, IVisibilityChangedEventArgs *args)
 {
-    Q_UNUSED(window);
-    Q_UNUSED(args);
-
     boolean visible;
     args->get_Visible(&visible);
     QWindowSystemInterface::handleApplicationStateChanged(visible ? Qt::ApplicationActive : Qt::ApplicationHidden);
@@ -1045,60 +1085,52 @@ HRESULT QWinRTScreen::onVisibilityChanged(ICoreWindow *window, IVisibilityChange
     return S_OK;
 }
 
-#if _MSC_VER<=1700
-HRESULT QWinRTScreen::onOrientationChanged(IInspectable *)
-#else
 HRESULT QWinRTScreen::onOrientationChanged(IDisplayInformation *, IInspectable *)
-#endif
 {
+    Q_D(QWinRTScreen);
+
     DisplayOrientations displayOrientation;
-    m_displayInformation->get_CurrentOrientation(&displayOrientation);
+    HRESULT hr = d->displayInformation->get_CurrentOrientation(&displayOrientation);
+    RETURN_OK_IF_FAILED("Failed to get current orientations.");
+
     Qt::ScreenOrientation newOrientation = static_cast<Qt::ScreenOrientation>(static_cast<int>(qtOrientationsFromNative(displayOrientation)));
-    if (m_orientation != newOrientation) {
-        m_orientation = newOrientation;
-        QWindowSystemInterface::handleScreenOrientationChange(screen(), m_orientation);
+    if (d->orientation != newOrientation) {
+        d->orientation = newOrientation;
+        QWindowSystemInterface::handleScreenOrientationChange(screen(), d->orientation);
     }
 
     return S_OK;
 }
 
-#if _MSC_VER<=1700
-HRESULT QWinRTScreen::onDpiChanged(IInspectable *)
-#else
 HRESULT QWinRTScreen::onDpiChanged(IDisplayInformation *, IInspectable *)
-#endif
 {
-#if defined(Q_OS_WINPHONE) && _MSC_VER>=1800 // WP 8.1
+    Q_D(QWinRTScreen);
+
+    HRESULT hr;
+#ifdef Q_OS_WINPHONE
     ComPtr<IDisplayInformation2> displayInformation;
-    HRESULT hr = m_displayInformation->QueryInterface(IID_IDisplayInformation2, &displayInformation);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to cast display information.");
-        return S_OK;
-    }
-    hr = displayInformation->get_RawPixelsPerViewPixel(&m_devicePixelRatio);
+    hr = d->displayInformation.As(&displayInformation);
+    RETURN_OK_IF_FAILED("Failed to cast display information.");
+    hr = displayInformation->get_RawPixelsPerViewPixel(&d->scaleFactor);
 #else
     ResolutionScale resolutionScale;
-    HRESULT hr = m_displayInformation->get_ResolutionScale(&resolutionScale);
-#endif
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get display resolution scale.");
-        return S_OK;
-    }
-#if !(defined(Q_OS_WINPHONE) && _MSC_VER>=1800) // !WP8.1
-    m_devicePixelRatio = qreal(resolutionScale) / 100;
+    hr = d->displayInformation->get_ResolutionScale(&resolutionScale);
+    d->scaleFactor = qreal(resolutionScale) / 100;
 #endif
-
-    // Correct the scale factor for integer window size
-    m_devicePixelRatio = m_devicePixelRatio * ((m_geometry.width()/qRound(m_geometry.width()) +
-                                                m_geometry.height()/qRound(m_geometry.height())) / 2.0);
+    RETURN_OK_IF_FAILED("Failed to get scale factor");
 
     FLOAT dpi;
-    hr = m_displayInformation->get_LogicalDpi(&dpi);
-    if (FAILED(hr)) {
-        qErrnoWarning(hr, "Failed to get logical DPI.");
-        return S_OK;
-    }
-    m_dpi = dpi;
+    hr = d->displayInformation->get_LogicalDpi(&dpi);
+    RETURN_OK_IF_FAILED("Failed to get logical DPI.");
+    d->logicalDpi = dpi;
+
+    hr = d->displayInformation->get_RawDpiX(&dpi);
+    RETURN_OK_IF_FAILED("Failed to get x raw DPI.");
+    d->physicalDpi.first = dpi ? dpi : 96.0;
+
+    hr = d->displayInformation->get_RawDpiY(&dpi);
+    RETURN_OK_IF_FAILED("Failed to get y raw DPI.");
+    d->physicalDpi.second = dpi ? dpi : 96.0;
 
     return S_OK;
 }
@@ -1106,14 +1138,16 @@ HRESULT QWinRTScreen::onDpiChanged(IDisplayInformation *, IInspectable *)
 #ifdef Q_OS_WINPHONE
 HRESULT QWinRTScreen::onBackButtonPressed(IInspectable *, IBackPressedEventArgs *args)
 {
+    Q_D(QWinRTScreen);
+
     QKeyEvent backPress(QEvent::KeyPress, Qt::Key_Back, Qt::NoModifier);
     QKeyEvent backRelease(QEvent::KeyRelease, Qt::Key_Back, Qt::NoModifier);
     backPress.setAccepted(false);
     backRelease.setAccepted(false);
 
-    QObject *receiver = m_visibleWindows.isEmpty()
+    QObject *receiver = d->visibleWindows.isEmpty()
             ? static_cast<QObject *>(QGuiApplication::instance())
-            : static_cast<QObject *>(m_visibleWindows.first());
+            : static_cast<QObject *>(d->visibleWindows.first());
 
     // If the event is ignored, the app will suspend
     QGuiApplication::sendEvent(receiver, &backPress);
diff --git a/src/plugins/platforms/winrt/qwinrtscreen.h b/src/plugins/platforms/winrt/qwinrtscreen.h
index d39683a960..e70a998216 100644
--- a/src/plugins/platforms/winrt/qwinrtscreen.h
+++ b/src/plugins/platforms/winrt/qwinrtscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,19 +37,12 @@
 #include <qpa/qplatformscreen.h>
 #include <qpa/qwindowsysteminterface.h>
 
-#include <QtCore/QHash>
-#include <QtGui/QSurfaceFormat>
 #include <EGL/egl.h>
 
-#include <EventToken.h>
-
 namespace ABI {
     namespace Windows {
         namespace ApplicationModel {
             struct ISuspendingEventArgs;
-            namespace Core {
-                struct ICoreApplication;
-            }
         }
         namespace UI {
             namespace Core {
@@ -71,14 +56,9 @@ namespace ABI {
                 struct IWindowActivatedEventArgs;
                 struct IWindowSizeChangedEventArgs;
             }
-            namespace ViewManagement {
-                struct IApplicationViewStatics;
-            }
         }
         namespace Graphics {
             namespace Display {
-                struct IDisplayPropertiesStatics;
-                struct IDisplayInformationStatics;
                 struct IDisplayInformation;
             }
         }
@@ -99,28 +79,26 @@ QT_BEGIN_NAMESPACE
 
 class QTouchDevice;
 class QWinRTEGLContext;
-class QWinRTPageFlipper;
 class QWinRTCursor;
 class QWinRTInputContext;
-
+class QWinRTScreenPrivate;
 class QWinRTScreen : public QPlatformScreen
 {
 public:
-    explicit QWinRTScreen(ABI::Windows::UI::Core::ICoreWindow *window);
+    explicit QWinRTScreen();
+    ~QWinRTScreen();
     QRect geometry() const;
     int depth() const;
     QImage::Format format() const;
     QSurfaceFormat surfaceFormat() const;
     QSizeF physicalSize() const Q_DECL_OVERRIDE;
     QDpi logicalDpi() const Q_DECL_OVERRIDE;
-    qreal devicePixelRatio() const Q_DECL_OVERRIDE;
     QWinRTInputContext *inputContext() const;
     QPlatformCursor *cursor() const;
     Qt::KeyboardModifiers keyboardModifiers() const;
 
     Qt::ScreenOrientation nativeOrientation() const;
     Qt::ScreenOrientation orientation() const;
-    void setOrientationUpdateMask(Qt::ScreenOrientations mask);
 
     QWindow *topWindow() const;
     void addWindow(QWindow *window);
@@ -135,69 +113,31 @@ public:
 private:
     void handleExpose();
 
-    // Event handlers
-    QHash<QEvent::Type, EventRegistrationToken> m_tokens;
-    QHash<Qt::ApplicationState, EventRegistrationToken> m_suspendTokens;
-
-    HRESULT onKeyDown(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IKeyEventArgs *args);
-    HRESULT onKeyUp(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IKeyEventArgs *args);
-    HRESULT onCharacterReceived(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::ICharacterReceivedEventArgs *args);
-    HRESULT onPointerEntered(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IPointerEventArgs *args);
-    HRESULT onPointerExited(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IPointerEventArgs *args);
-    HRESULT onPointerUpdated(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IPointerEventArgs *args);
-    HRESULT onSizeChanged(ABI::Windows::UI::Core::ICoreWindow *window, ABI::Windows::UI::Core::IWindowSizeChangedEventArgs *args);
+    HRESULT onKeyDown(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IKeyEventArgs *);
+    HRESULT onKeyUp(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IKeyEventArgs *);
+    HRESULT onCharacterReceived(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::ICharacterReceivedEventArgs *);
+    HRESULT onPointerEntered(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IPointerEventArgs *);
+    HRESULT onPointerExited(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IPointerEventArgs *);
+    HRESULT onPointerUpdated(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IPointerEventArgs *);
+    HRESULT onSizeChanged(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IWindowSizeChangedEventArgs *);
 
-    HRESULT onActivated(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IWindowActivatedEventArgs *args);
+    HRESULT onActivated(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IWindowActivatedEventArgs *);
     HRESULT onSuspended(IInspectable *, ABI::Windows::ApplicationModel::ISuspendingEventArgs *);
     HRESULT onResume(IInspectable *, IInspectable *);
 
-    HRESULT onClosed(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::ICoreWindowEventArgs *args);
-    HRESULT onVisibilityChanged(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IVisibilityChangedEventArgs *args);
-    HRESULT onAutomationProviderRequested(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IAutomationProviderRequestedEventArgs *args);
+    HRESULT onClosed(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::ICoreWindowEventArgs *);
+    HRESULT onVisibilityChanged(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IVisibilityChangedEventArgs *);
+    HRESULT onAutomationProviderRequested(ABI::Windows::UI::Core::ICoreWindow *, ABI::Windows::UI::Core::IAutomationProviderRequestedEventArgs *);
 
-#if _MSC_VER<=1700
-    HRESULT onOrientationChanged(IInspectable *);
-    HRESULT onDpiChanged(IInspectable *);
-#else
     HRESULT onOrientationChanged(ABI::Windows::Graphics::Display::IDisplayInformation *, IInspectable *);
     HRESULT onDpiChanged(ABI::Windows::Graphics::Display::IDisplayInformation *, IInspectable *);
-#endif
 
 #ifdef Q_OS_WINPHONE
     HRESULT onBackButtonPressed(IInspectable *, ABI::Windows::Phone::UI::Input::IBackPressedEventArgs *args);
 #endif
 
-    ABI::Windows::UI::Core::ICoreWindow *m_coreWindow;
-    ABI::Windows::UI::ViewManagement::IApplicationViewStatics *m_applicationView;
-    ABI::Windows::ApplicationModel::Core::ICoreApplication *m_application;
-
-    QRectF m_geometry;
-    QImage::Format m_format;
-    QSurfaceFormat m_surfaceFormat;
-    qreal m_dpi;
-    int m_depth;
-    QWinRTInputContext *m_inputContext;
-    QWinRTCursor *m_cursor;
-    QList<QWindow *> m_visibleWindows;
-
-    EGLDisplay m_eglDisplay;
-    EGLSurface m_eglSurface;
-
-#if _MSC_VER<=1700
-    ABI::Windows::Graphics::Display::IDisplayPropertiesStatics *m_displayInformation;
-#else
-    ABI::Windows::Graphics::Display::IDisplayInformationStatics *m_displayInformationFactory;
-    ABI::Windows::Graphics::Display::IDisplayInformation *m_displayInformation;
-#endif
-    qreal m_devicePixelRatio;
-    Qt::ScreenOrientation m_nativeOrientation;
-    Qt::ScreenOrientation m_orientation;
-
-#ifndef Q_OS_WINPHONE
-    QHash<quint32, QPair<Qt::Key, QString> > m_activeKeys;
-#endif
-    QTouchDevice *m_touchDevice;
-    QHash<quint32, QWindowSystemInterface::TouchPoint> m_touchPoints;
+    QScopedPointer<QWinRTScreenPrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTScreen)
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrtservices.cpp b/src/plugins/platforms/winrt/qwinrtservices.cpp
index b0f9247d36..f626daedfa 100644
--- a/src/plugins/platforms/winrt/qwinrtservices.cpp
+++ b/src/plugins/platforms/winrt/qwinrtservices.cpp
@@ -1,48 +1,42 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qwinrtservices.h"
+#include "qwinrtfileengine.h"
 #include <QtCore/QUrl>
 #include <QtCore/QDir>
 #include <QtCore/QCoreApplication>
+#include <QtCore/qfunctions_winrt.h>
 
 #include <wrl.h>
 #include <windows.foundation.h>
@@ -56,83 +50,90 @@ using namespace ABI::Windows::System;
 
 QT_BEGIN_NAMESPACE
 
+class QWinRTServicesPrivate
+{
+public:
+    ComPtr<IUriRuntimeClassFactory> uriFactory;
+    ComPtr<IStorageFileStatics> fileFactory;
+    ComPtr<ILauncherStatics> launcher;
+};
+
 QWinRTServices::QWinRTServices()
+    : d_ptr(new QWinRTServicesPrivate)
 {
-    GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Foundation_Uri).Get(), &m_uriFactory);
-    GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_StorageFile).Get(), &m_fileFactory);
-    GetActivationFactory(HString::MakeReference(RuntimeClass_Windows_System_Launcher).Get(), &m_launcher);
+    Q_D(QWinRTServices);
+
+    HRESULT hr;
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Foundation_Uri).Get(),
+                                IID_PPV_ARGS(&d->uriFactory));
+    Q_ASSERT_X(SUCCEEDED(hr), Q_FUNC_INFO, qPrintable(qt_error_string(hr)));
+
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_Storage_StorageFile).Get(),
+                                IID_PPV_ARGS(&d->fileFactory));
+    Q_ASSERT_X(SUCCEEDED(hr), Q_FUNC_INFO, qPrintable(qt_error_string(hr)));
+
+    hr = RoGetActivationFactory(HString::MakeReference(RuntimeClass_Windows_System_Launcher).Get(),
+                                IID_PPV_ARGS(&d->launcher));
+    Q_ASSERT_X(SUCCEEDED(hr), Q_FUNC_INFO, qPrintable(qt_error_string(hr)));
 }
 
 QWinRTServices::~QWinRTServices()
 {
-    if (m_uriFactory)
-        m_uriFactory->Release();
-
-    if (m_fileFactory)
-        m_fileFactory->Release();
-
-    if (m_launcher)
-        m_launcher->Release();
 }
 
 bool QWinRTServices::openUrl(const QUrl &url)
 {
-    if (!(m_uriFactory && m_launcher))
-        return QPlatformServices::openUrl(url);
+    Q_D(QWinRTServices);
 
-    IUriRuntimeClass *uri;
+    ComPtr<IUriRuntimeClass> uri;
     QString urlString = url.toString();
-    // ### TODO: Replace with HStringReference when WP8.0 support is removed
-    HString uriString;
-    uriString.Set((const wchar_t*)urlString.utf16(), urlString.length());
-    m_uriFactory->CreateUri(uriString.Get(), &uri);
-    if (!uri)
-        return false;
-
-    IAsyncOperation<bool> *launchOp;
-    m_launcher->LaunchUriAsync(uri, &launchOp);
-    uri->Release();
-    if (!launchOp)
-        return false;
-
-    boolean result = false;
-    while (launchOp->GetResults(&result) == E_ILLEGAL_METHOD_CALL)
-        QCoreApplication::processEvents();
-    launchOp->Release();
+    HStringReference uriString(reinterpret_cast<LPCWSTR>(urlString.utf16()), urlString.length());
+    HRESULT hr = d->uriFactory->CreateUri(uriString.Get(), &uri);
+    RETURN_FALSE_IF_FAILED("Failed to create URI from QUrl.");
+
+    ComPtr<IAsyncOperation<bool>> op;
+    hr = d->launcher->LaunchUriAsync(uri.Get(), &op);
+    RETURN_FALSE_IF_FAILED("Failed to start URI launch.");
+
+    boolean result;
+    hr = QWinRTFunctions::await(op, &result);
+    RETURN_FALSE_IF_FAILED("Failed to launch URI.");
 
     return result;
 }
 
 bool QWinRTServices::openDocument(const QUrl &url)
 {
-    if (!(m_fileFactory && m_launcher))
-        return QPlatformServices::openDocument(url);
-
-    const QString pathString = QDir::toNativeSeparators(url.toLocalFile());
-    // ### TODO: Replace with HStringReference when WP8.0 support is removed
-    HString path;
-    path.Set((const wchar_t*)pathString.utf16(), pathString.length());
-    IAsyncOperation<StorageFile*> *fileOp;
-    m_fileFactory->GetFileFromPathAsync(path.Get(), &fileOp);
-    if (!fileOp)
-        return false;
-
-    IStorageFile *file = nullptr;
-    while (fileOp->GetResults(&file) == E_ILLEGAL_METHOD_CALL)
-        QCoreApplication::processEvents();
-    fileOp->Release();
-    if (!file)
-        return false;
-
-    IAsyncOperation<bool> *launchOp;
-    m_launcher->LaunchFileAsync(file, &launchOp);
-    if (!launchOp)
-        return false;
-
-    boolean result = false;
-    while (launchOp->GetResults(&result) == E_ILLEGAL_METHOD_CALL)
-        QCoreApplication::processEvents();
-    launchOp->Release();
+    Q_D(QWinRTServices);
+
+    HRESULT hr;
+    ComPtr<IStorageFile> file;
+    ComPtr<IStorageItem> item = QWinRTFileEngineHandler::registeredFile(url.toLocalFile());
+    if (item) {
+        hr = item.As(&file);
+        if (FAILED(hr))
+            qErrnoWarning(hr, "Failed to cast picked item to a file");
+    }
+    if (!file) {
+        const QString pathString = QDir::toNativeSeparators(url.toLocalFile());
+        HStringReference path(reinterpret_cast<LPCWSTR>(pathString.utf16()), pathString.length());
+        ComPtr<IAsyncOperation<StorageFile *>> op;
+        hr = d->fileFactory->GetFileFromPathAsync(path.Get(), &op);
+        RETURN_FALSE_IF_FAILED("Failed to initialize file URI.");
+
+        hr = QWinRTFunctions::await(op, file.GetAddressOf());
+        RETURN_FALSE_IF_FAILED("Failed to get file URI.");
+    }
+
+    boolean result;
+    {
+        ComPtr<IAsyncOperation<bool>> op;
+        hr = d->launcher->LaunchFileAsync(file.Get(), &op);
+        RETURN_FALSE_IF_FAILED("Failed to start file launch.");
+
+        hr = QWinRTFunctions::await(op, &result);
+        RETURN_FALSE_IF_FAILED("Failed to launch file.");
+    }
 
     return result;
 }
diff --git a/src/plugins/platforms/winrt/qwinrtservices.h b/src/plugins/platforms/winrt/qwinrtservices.h
index 9cc917030a..865047878d 100644
--- a/src/plugins/platforms/winrt/qwinrtservices.h
+++ b/src/plugins/platforms/winrt/qwinrtservices.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,23 +35,11 @@
 #define QWINRTSERVICES_H
 
 #include <qpa/qplatformservices.h>
+#include <QtCore/QScopedPointer>
 
-namespace ABI {
-    namespace Windows {
-        namespace Foundation {
-            struct IUriRuntimeClassFactory;
-        }
-        namespace Storage {
-            struct IStorageFileStatics;
-        }
-        namespace System {
-            struct ILauncherStatics;
-        }
-    }
-}
-
-QT_BEGIN_NAMESPACE
+QT_USE_NAMESPACE
 
+class QWinRTServicesPrivate;
 class QWinRTServices : public QPlatformServices
 {
 public:
@@ -70,11 +50,8 @@ public:
     bool openDocument(const QUrl &url);
 
 private:
-    ABI::Windows::Foundation::IUriRuntimeClassFactory *m_uriFactory;
-    ABI::Windows::Storage::IStorageFileStatics *m_fileFactory;
-    ABI::Windows::System::ILauncherStatics *m_launcher;
+    QScopedPointer<QWinRTServicesPrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTServices)
 };
 
-QT_END_NAMESPACE
-
 #endif // QWINRTSERVICES_H
diff --git a/src/plugins/platforms/winrt/qwinrttheme.cpp b/src/plugins/platforms/winrt/qwinrttheme.cpp
new file mode 100644
index 0000000000..f64b47960a
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrttheme.cpp
@@ -0,0 +1,251 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qwinrttheme.h"
+#include "qwinrtmessagedialoghelper.h"
+#include "qwinrtfiledialoghelper.h"
+
+#include <QtCore/qfunctions_winrt.h>
+#include <QtGui/QPalette>
+
+#include <wrl.h>
+#include <windows.ui.h>
+#include <windows.ui.viewmanagement.h>
+using namespace Microsoft::WRL;
+using namespace ABI::Windows::UI;
+using namespace ABI::Windows::UI::ViewManagement;
+
+QT_BEGIN_NAMESPACE
+
+static IUISettings *uiSettings()
+{
+    static ComPtr<IUISettings> settings;
+    if (!settings) {
+        HRESULT hr;
+        hr = RoActivateInstance(Wrappers::HString::MakeReference(RuntimeClass_Windows_UI_ViewManagement_UISettings).Get(),
+                                &settings);
+        Q_ASSERT_SUCCEEDED(hr);
+    }
+    return settings.Get();
+}
+
+class QWinRTThemePrivate
+{
+public:
+    QPalette palette;
+};
+
+static inline QColor fromColor(const Color &color)
+{
+    return QColor(color.R, color.G, color.B, color.A);
+}
+
+QWinRTTheme::QWinRTTheme()
+    : d_ptr(new QWinRTThemePrivate)
+{
+    Q_D(QWinRTTheme);
+
+    HRESULT hr;
+    Color color;
+
+#ifdef Q_OS_WINPHONE
+    hr = uiSettings()->UIElementColor(UIElementType_PopupBackground, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::ToolTipBase, fromColor(color));
+    d->palette.setColor(QPalette::AlternateBase, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_NonTextMedium, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Button, fromColor(color));
+    hr = uiSettings()->UIElementColor(UIElementType_NonTextMediumHigh, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Midlight, fromColor(color));
+    hr = uiSettings()->UIElementColor(UIElementType_NonTextHigh, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Light, fromColor(color));
+    hr = uiSettings()->UIElementColor(UIElementType_NonTextMediumLow, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Mid, fromColor(color));
+    hr = uiSettings()->UIElementColor(UIElementType_NonTextLow, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Dark, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_TextHigh, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::ButtonText, fromColor(color));
+    d->palette.setColor(QPalette::Text, fromColor(color));
+    d->palette.setColor(QPalette::WindowText, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_TextMedium, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::ToolTipText, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_AccentColor, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Highlight, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_PageBackground, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Window, fromColor(color));
+    d->palette.setColor(QPalette::Base, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_TextContrastWithHigh, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::BrightText, fromColor(color));
+#else
+    hr = uiSettings()->UIElementColor(UIElementType_ActiveCaption, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::ToolTipBase, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_Background, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::AlternateBase, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_ButtonFace, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Button, fromColor(color));
+    d->palette.setColor(QPalette::Midlight, fromColor(color).lighter(110));
+    d->palette.setColor(QPalette::Light, fromColor(color).lighter(150));
+    d->palette.setColor(QPalette::Mid, fromColor(color).dark(130));
+    d->palette.setColor(QPalette::Dark, fromColor(color).dark(150));
+
+    hr = uiSettings()->UIElementColor(UIElementType_ButtonText, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::ButtonText, fromColor(color));
+    d->palette.setColor(QPalette::Text, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_CaptionText, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::ToolTipText, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_Highlight, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Highlight, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_HighlightText, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::HighlightedText, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_Window, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::Window, fromColor(color));
+    d->palette.setColor(QPalette::Base, fromColor(color));
+
+    hr = uiSettings()->UIElementColor(UIElementType_Hotlight, &color);
+    Q_ASSERT_SUCCEEDED(hr);
+    d->palette.setColor(QPalette::BrightText, fromColor(color));
+#endif
+}
+
+bool QWinRTTheme::usePlatformNativeDialog(DialogType type) const
+{
+    static bool useNativeDialogs = qEnvironmentVariableIsSet("QT_USE_WINRT_NATIVE_DIALOGS")
+            ? qgetenv("QT_USE_WINRT_NATIVE_DIALOGS").toInt() : true;
+
+    if (type == FileDialog || type == MessageDialog)
+        return useNativeDialogs;
+    return false;
+}
+
+QPlatformDialogHelper *QWinRTTheme::createPlatformDialogHelper(DialogType type) const
+{
+    switch (type) {
+    case FileDialog:
+        return new QWinRTFileDialogHelper;
+    case MessageDialog:
+        return new QWinRTMessageDialogHelper(this);
+    default:
+        break;
+    }
+    return QPlatformTheme::createPlatformDialogHelper(type);
+}
+
+QVariant QWinRTTheme::styleHint(QPlatformIntegration::StyleHint hint)
+{
+    HRESULT hr;
+    switch (hint) {
+    case QPlatformIntegration::CursorFlashTime: {
+        quint32 blinkRate;
+        hr = uiSettings()->get_CaretBlinkRate(&blinkRate);
+        RETURN_IF_FAILED("Failed to get caret blink rate", return defaultThemeHint(CursorFlashTime));
+        return blinkRate;
+    }
+    case QPlatformIntegration::KeyboardInputInterval:
+        return defaultThemeHint(KeyboardInputInterval);
+    case QPlatformIntegration::MouseDoubleClickInterval: {
+        quint32 doubleClickTime;
+        hr = uiSettings()->get_DoubleClickTime(&doubleClickTime);
+        RETURN_IF_FAILED("Failed to get double click time", return defaultThemeHint(MouseDoubleClickInterval));
+        return doubleClickTime;
+    }
+    case QPlatformIntegration::StartDragDistance:
+        return defaultThemeHint(StartDragDistance);
+    case QPlatformIntegration::StartDragTime:
+        return defaultThemeHint(StartDragTime);
+    case QPlatformIntegration::KeyboardAutoRepeatRate:
+        return defaultThemeHint(KeyboardAutoRepeatRate);
+    case QPlatformIntegration::ShowIsFullScreen:
+        return true;
+    case QPlatformIntegration::PasswordMaskDelay:
+        return defaultThemeHint(PasswordMaskDelay);
+    case QPlatformIntegration::FontSmoothingGamma:
+        return qreal(1.7);
+    case QPlatformIntegration::StartDragVelocity:
+        return defaultThemeHint(StartDragVelocity);
+    case QPlatformIntegration::UseRtlExtensions:
+        return false;
+    case QPlatformIntegration::SynthesizeMouseFromTouchEvents:
+        return true;
+    case QPlatformIntegration::PasswordMaskCharacter:
+        return defaultThemeHint(PasswordMaskCharacter);
+    case QPlatformIntegration::SetFocusOnTouchRelease:
+        return false;
+    case QPlatformIntegration::ShowIsMaximized:
+        return false;
+    case MousePressAndHoldInterval:
+        return defaultThemeHint(MousePressAndHoldInterval);
+    default:
+        break;
+    }
+    return QVariant();
+}
+
+const QPalette *QWinRTTheme::palette(Palette type) const
+{
+    Q_D(const QWinRTTheme);
+    if (type == SystemPalette)
+        return &d->palette;
+    return QPlatformTheme::palette(type);
+}
+
+QT_END_NAMESPACE
diff --git a/src/plugins/platforms/winrt/qwinrttheme.h b/src/plugins/platforms/winrt/qwinrttheme.h
new file mode 100644
index 0000000000..5218bce7f9
--- /dev/null
+++ b/src/plugins/platforms/winrt/qwinrttheme.h
@@ -0,0 +1,62 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the plugins of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QWINRTTHEME_H
+#define QWINRTTHEME_H
+
+#include <qpa/qplatformtheme.h>
+#include <qpa/qplatformintegration.h>
+
+QT_BEGIN_NAMESPACE
+
+class QWinRTThemePrivate;
+class QWinRTTheme : public QPlatformTheme
+{
+public:
+    QWinRTTheme();
+
+    bool usePlatformNativeDialog(DialogType type) const;
+    QPlatformDialogHelper *createPlatformDialogHelper(DialogType type) const;
+
+    const QPalette *palette(Palette type = SystemPalette) const Q_DECL_OVERRIDE;
+
+    static QVariant styleHint(QPlatformIntegration::StyleHint hint);
+
+private:
+    QScopedPointer<QWinRTThemePrivate> d_ptr;
+    Q_DECLARE_PRIVATE(QWinRTTheme)
+};
+
+QT_END_NAMESPACE
+
+#endif // QWINRTTHEME_H
diff --git a/src/plugins/platforms/winrt/qwinrtwindow.cpp b/src/plugins/platforms/winrt/qwinrtwindow.cpp
index 80ee6bd761..35d6b64008 100644
--- a/src/plugins/platforms/winrt/qwinrtwindow.cpp
+++ b/src/plugins/platforms/winrt/qwinrtwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/qwinrtwindow.h b/src/plugins/platforms/winrt/qwinrtwindow.h
index 121f430686..85f3efab5d 100644
--- a/src/plugins/platforms/winrt/qwinrtwindow.h
+++ b/src/plugins/platforms/winrt/qwinrtwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/winrt/winrt.pro b/src/plugins/platforms/winrt/winrt.pro
index 349cdf11c9..80429daeed 100644
--- a/src/plugins/platforms/winrt/winrt.pro
+++ b/src/plugins/platforms/winrt/winrt.pro
@@ -32,48 +32,37 @@ SOURCES = \
     qwinrtcursor.cpp \
     qwinrteglcontext.cpp \
     qwinrteventdispatcher.cpp \
+    qwinrtfiledialoghelper.cpp \
+    qwinrtfileengine.cpp \
     qwinrtfontdatabase.cpp \
     qwinrtinputcontext.cpp \
     qwinrtintegration.cpp \
-    qwinrtplatformmessagedialoghelper.cpp \
-    qwinrtplatformtheme.cpp \
+    qwinrtmessagedialoghelper.cpp \
     qwinrtscreen.cpp \
     qwinrtservices.cpp \
+    qwinrttheme.cpp \
     qwinrtwindow.cpp
 
+
 HEADERS = \
     qwinrtbackingstore.h \
     qwinrtcursor.h \
     qwinrteglcontext.h \
     qwinrteventdispatcher.h \
+    qwinrtfiledialoghelper.h \
+    qwinrtfileengine.h \
     qwinrtfontdatabase.h \
     qwinrtinputcontext.h \
     qwinrtintegration.h \
-    qwinrtplatformmessagedialoghelper.h \
-    qwinrtplatformtheme.h \
+    qwinrtmessagedialoghelper.h \
     qwinrtscreen.h \
     qwinrtservices.h \
+    qwinrttheme.h \
     qwinrtwindow.h
 
-BLIT_INPUT = $$PWD/blit.hlsl
-fxc_blitps.commands = fxc.exe /nologo /T ps_4_0_level_9_1 /E blitps /Vn q_blitps /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-fxc_blitps.output = $$OUT_PWD/blitps.h
-fxc_blitps.input = BLIT_INPUT
-fxc_blitps.dependency_type = TYPE_C
-fxc_blitps.variable_out = HEADERS
-fxc_blitps.CONFIG += target_predeps
-fxc_blitvs.commands = fxc.exe /nologo /T vs_4_0_level_9_1 /E blitvs /Vn q_blitvs /Fh ${QMAKE_FILE_OUT} ${QMAKE_FILE_NAME}
-fxc_blitvs.output = $$OUT_PWD/blitvs.h
-fxc_blitvs.input = BLIT_INPUT
-fxc_blitvs.dependency_type = TYPE_C
-fxc_blitvs.variable_out = HEADERS
-fxc_blitvs.CONFIG += target_predeps
-QMAKE_EXTRA_COMPILERS += fxc_blitps fxc_blitvs
-
 winphone:equals(WINSDK_VER, 8.0): {
     SOURCES -= qwinrtplatformmessagedialoghelper.cpp
     HEADERS -= qwinrtplatformmessagedialoghelper.h
 }
 
-OTHER_FILES += winrt.json \
-    blit.hlsl
+OTHER_FILES += winrt.json
diff --git a/src/plugins/platforms/xcb/qglxintegration.cpp b/src/plugins/platforms/xcb/qglxintegration.cpp
index 67235e0ef1..c0be836bce 100644
--- a/src/plugins/platforms/xcb/qglxintegration.cpp
+++ b/src/plugins/platforms/xcb/qglxintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,6 +46,7 @@
 
 #include "qglxintegration.h"
 #include <QtPlatformSupport/private/qglxconvenience_p.h>
+#include <QtPlatformHeaders/QGLXNativeContext>
 
 #if defined(Q_OS_LINUX) || defined(Q_OS_BSD4)
 #include <dlfcn.h>
@@ -83,31 +76,32 @@ typedef GLXContext (*glXCreateContextAttribsARBProc)(Display*, GLXFBConfig, GLXC
 #define GL_CONTEXT_FLAG_DEBUG_BIT 0x00000002
 #endif
 
-static Window createDummyWindow(QXcbScreen *screen, XVisualInfo *visualInfo)
+static Window createDummyWindow(Display *dpy, XVisualInfo *visualInfo, int screenNumber, Window rootWin)
 {
-    Colormap cmap = XCreateColormap(DISPLAY_FROM_XCB(screen), screen->root(), visualInfo->visual, AllocNone);
+    Colormap cmap = XCreateColormap(dpy, rootWin, visualInfo->visual, AllocNone);
     XSetWindowAttributes a;
-    a.background_pixel = WhitePixel(DISPLAY_FROM_XCB(screen), screen->screenNumber());
-    a.border_pixel = BlackPixel(DISPLAY_FROM_XCB(screen), screen->screenNumber());
+    a.background_pixel = WhitePixel(dpy, screenNumber);
+    a.border_pixel = BlackPixel(dpy, screenNumber);
     a.colormap = cmap;
+    a.override_redirect = true;
 
-    Window window = XCreateWindow(DISPLAY_FROM_XCB(screen), screen->root(),
+    Window window = XCreateWindow(dpy, rootWin,
                                   0, 0, 100, 100,
                                   0, visualInfo->depth, InputOutput, visualInfo->visual,
-                                  CWBackPixel|CWBorderPixel|CWColormap, &a);
+                                  CWBackPixel|CWBorderPixel|CWColormap|CWOverrideRedirect, &a);
 #ifndef QT_NO_DEBUG
-    XStoreName(DISPLAY_FROM_XCB(screen), window, "Qt GLX dummy window");
+    XStoreName(dpy, window, "Qt GLX dummy window");
 #endif
-    XFreeColormap(DISPLAY_FROM_XCB(screen), cmap);
+    XFreeColormap(dpy, cmap);
     return window;
 }
 
-static Window createDummyWindow(QXcbScreen *screen, GLXFBConfig config)
+static Window createDummyWindow(Display *dpy, GLXFBConfig config, int screenNumber, Window rootWin)
 {
-    XVisualInfo *visualInfo = glXGetVisualFromFBConfig(DISPLAY_FROM_XCB(screen), config);
+    XVisualInfo *visualInfo = glXGetVisualFromFBConfig(dpy, config);
     if (!visualInfo)
         qFatal("Could not initialize GLX");
-    Window window = createDummyWindow(screen, visualInfo);
+    Window window = createDummyWindow(dpy, visualInfo, screenNumber, rootWin);
     XFree(visualInfo);
     return window;
 }
@@ -160,14 +154,25 @@ static void updateFormatFromContext(QSurfaceFormat &format)
     }
 }
 
-QGLXContext::QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlatformOpenGLContext *share)
+QGLXContext::QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlatformOpenGLContext *share,
+                         const QVariant &nativeHandle)
     : QPlatformOpenGLContext()
     , m_display(DISPLAY_FROM_XCB(screen))
+    , m_config(0)
     , m_context(0)
     , m_shareContext(0)
     , m_format(format)
     , m_isPBufferCurrent(false)
     , m_swapInterval(-1)
+    , m_ownsContext(nativeHandle.isNull())
+{
+    if (nativeHandle.isNull())
+        init(screen, share);
+    else
+        init(screen, share, nativeHandle);
+}
+
+void QGLXContext::init(QXcbScreen *screen, QPlatformOpenGLContext *share)
 {
     if (m_format.renderableType() == QSurfaceFormat::DefaultRenderableType)
         m_format.setRenderableType(QSurfaceFormat::OpenGL);
@@ -178,6 +183,7 @@ QGLXContext::QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlat
         m_shareContext = static_cast<const QGLXContext*>(share)->glxContext();
 
     GLXFBConfig config = qglx_findConfig(DISPLAY_FROM_XCB(screen),screen->screenNumber(),m_format);
+    m_config = config;
     XVisualInfo *visualInfo = 0;
     Window window = 0; // Temporary window used to query OpenGL context
 
@@ -195,21 +201,21 @@ QGLXContext::QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlat
                 && (m_format.renderableType() != QSurfaceFormat::OpenGLES || (supportsProfiles && glxExt.contains("GLX_EXT_create_context_es2_profile")))) {
             // Try to create an OpenGL context for each known OpenGL version in descending
             // order from the requested version.
-            const int requestedVersion = format.majorVersion() * 10 + qMin(format.minorVersion(), 9);
+            const int requestedVersion = m_format.majorVersion() * 10 + qMin(m_format.minorVersion(), 9);
 
             QVector<int> glVersions;
             if (m_format.renderableType() == QSurfaceFormat::OpenGL) {
-                if (requestedVersion > 43)
+                if (requestedVersion > 45)
                     glVersions << requestedVersion;
 
                 // Don't bother with versions below 2.0
-                glVersions << 43 << 42 << 41 << 40 << 33 << 32 << 31 << 30 << 21 << 20;
+                glVersions << 45 << 44 << 43 << 42 << 41 << 40 << 33 << 32 << 31 << 30 << 21 << 20;
             } else if (m_format.renderableType() == QSurfaceFormat::OpenGLES) {
-                if (requestedVersion > 30)
+                if (requestedVersion > 31)
                     glVersions << requestedVersion;
 
                 // Don't bother with versions below ES 2.0
-                glVersions << 30 << 20;
+                glVersions << 31 << 30 << 20;
                 // ES does not support any format option
                 m_format.setOptions(QSurfaceFormat::FormatOptions());
             }
@@ -282,10 +288,10 @@ QGLXContext::QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlat
 
         // Get the basic surface format details
         if (m_context)
-            qglx_surfaceFormatFromGLXFBConfig(&m_format, DISPLAY_FROM_XCB(screen), config, m_context);
+            qglx_surfaceFormatFromGLXFBConfig(&m_format, DISPLAY_FROM_XCB(screen), config);
 
         // Create a temporary window so that we can make the new context current
-        window = createDummyWindow(screen, config);
+        window = createDummyWindow(DISPLAY_FROM_XCB(screen), config, screen->screenNumber(), screen->root());
     } else {
         // requesting an OpenGL ES context requires glXCreateContextAttribsARB, so bail out
         if (m_format.renderableType() == QSurfaceFormat::OpenGLES)
@@ -303,26 +309,141 @@ QGLXContext::QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlat
         }
 
         // Create a temporary window so that we can make the new context current
-        window = createDummyWindow(screen, visualInfo);
+        window = createDummyWindow(DISPLAY_FROM_XCB(screen), visualInfo, screen->screenNumber(), screen->root());
         XFree(visualInfo);
     }
 
     // Query the OpenGL version and profile
     if (m_context && window) {
+        GLXContext prevContext = glXGetCurrentContext();
+        GLXDrawable prevDrawable = glXGetCurrentDrawable();
         glXMakeCurrent(m_display, window, m_context);
         updateFormatFromContext(m_format);
 
         // Make our context non-current
-        glXMakeCurrent(m_display, 0, 0);
+        glXMakeCurrent(m_display, prevDrawable, prevContext);
     }
 
     // Destroy our temporary window
     XDestroyWindow(m_display, window);
 }
 
+void QGLXContext::init(QXcbScreen *screen, QPlatformOpenGLContext *share, const QVariant &nativeHandle)
+{
+    if (!nativeHandle.canConvert<QGLXNativeContext>()) {
+        qWarning("QGLXContext: Requires a QGLXNativeContext");
+        return;
+    }
+    QGLXNativeContext handle = nativeHandle.value<QGLXNativeContext>();
+    GLXContext context = handle.context();
+    if (!context) {
+        qWarning("QGLXContext: No GLXContext given");
+        return;
+    }
+
+    // Use the provided Display, if available. If not, use our own. It may still work.
+    Display *dpy = handle.display();
+    if (!dpy)
+        dpy = DISPLAY_FROM_XCB(screen);
+
+    // Legacy contexts created using glXCreateContext are created using a visual
+    // and the FBConfig cannot be queried. The only way to adapt these contexts
+    // is to figure out the visual id.
+    XVisualInfo *vinfo = 0;
+    // If the VisualID is provided use it.
+    VisualID vid = handle.visualId();
+    if (!vid) {
+        // In the absence of the VisualID figure it out from the window.
+        Window wnd = handle.window();
+        if (wnd) {
+            XWindowAttributes attrs;
+            XGetWindowAttributes(dpy, wnd, &attrs);
+            vid = XVisualIDFromVisual(attrs.visual);
+        }
+    }
+    if (vid) {
+        XVisualInfo v;
+        v.screen = screen->screenNumber();
+        v.visualid = vid;
+        int n = 0;
+        vinfo = XGetVisualInfo(dpy, VisualScreenMask | VisualIDMask, &v, &n);
+        if (n < 1) {
+            XFree(vinfo);
+            vinfo = 0;
+        }
+    }
+
+    // For contexts created with an FBConfig using the modern functions providing the
+    // visual or window is not mandatory. Just query the config from the context.
+    GLXFBConfig config = 0;
+    if (!vinfo) {
+        int configId = 0;
+        if (glXQueryContext(dpy, context, GLX_FBCONFIG_ID, &configId) != Success) {
+            qWarning("QGLXContext: Failed to query config from the provided context");
+            return;
+        }
+
+        GLXFBConfig *configs;
+        int numConfigs = 0;
+        static const int attribs[] = { GLX_FBCONFIG_ID, configId, None };
+        configs = glXChooseFBConfig(dpy, screen->screenNumber(), attribs, &numConfigs);
+        if (!configs || numConfigs < 1) {
+            qWarning("QGLXContext: Failed to find config");
+            return;
+        }
+        if (configs && numConfigs > 1) // this is suspicious so warn but let it continue
+            qWarning("QGLXContext: Multiple configs for FBConfig ID %d", configId);
+
+        config = configs[0];
+        // Store the config.
+        m_config = config;
+    }
+
+    Q_ASSERT(vinfo || config);
+
+    int screenNumber = DefaultScreen(dpy);
+    Window window;
+    if (vinfo)
+        window = createDummyWindow(dpy, vinfo, screenNumber, RootWindow(dpy, screenNumber));
+    else
+        window = createDummyWindow(dpy, config, screenNumber, RootWindow(dpy, screenNumber));
+    if (!window) {
+        qWarning("QGLXContext: Failed to create dummy window");
+        return;
+    }
+
+    // Update OpenGL version and buffer sizes in our format.
+    GLXContext prevContext = glXGetCurrentContext();
+    GLXDrawable prevDrawable = glXGetCurrentDrawable();
+    if (!glXMakeCurrent(dpy, window, context)) {
+        qWarning("QGLXContext: Failed to make provided context current");
+        return;
+    }
+    m_format = QSurfaceFormat();
+    m_format.setRenderableType(QOpenGLContext::openGLModuleType() == QOpenGLContext::LibGL
+                               ? QSurfaceFormat::OpenGL : QSurfaceFormat::OpenGLES);
+    updateFormatFromContext(m_format);
+    if (vinfo)
+        qglx_surfaceFormatFromVisualInfo(&m_format, dpy, vinfo);
+    else
+        qglx_surfaceFormatFromGLXFBConfig(&m_format, dpy, config);
+    glXMakeCurrent(dpy, prevDrawable, prevContext);
+    XDestroyWindow(dpy, window);
+
+    if (vinfo)
+        XFree(vinfo);
+
+    // Success. Store the context. From this point on isValid() is true.
+    m_context = context;
+
+    if (share)
+        m_shareContext = static_cast<const QGLXContext*>(share)->glxContext();
+}
+
 QGLXContext::~QGLXContext()
 {
-    glXDestroyContext(m_display, m_context);
+    if (m_ownsContext)
+        glXDestroyContext(m_display, m_context);
 }
 
 static QXcbScreen *screenForPlatformSurface(QPlatformSurface *surface)
@@ -336,6 +457,11 @@ static QXcbScreen *screenForPlatformSurface(QPlatformSurface *surface)
     return Q_NULLPTR;
 }
 
+QVariant QGLXContext::nativeHandle() const
+{
+    return QVariant::fromValue<QGLXNativeContext>(QGLXNativeContext(m_context));
+}
+
 bool QGLXContext::makeCurrent(QPlatformSurface *surface)
 {
     bool success = false;
@@ -404,11 +530,11 @@ void QGLXContext::swapBuffers(QPlatformSurface *surface)
 
     if (surface->surface()->surfaceClass() == QSurface::Window) {
         QXcbWindow *platformWindow = static_cast<QXcbWindow *>(surface);
-        // OpenGL context might be bound to a non-gui thread
-        // use QueuedConnection to sync the window from the platformWindow's thread
-        // as QXcbWindow is no QObject, a wrapper slot in QXcbConnection is used.
+        // OpenGL context might be bound to a non-gui thread use QueuedConnection to sync
+        // the window from the platformWindow's thread as QXcbWindow is no QObject, an
+        // event is sent to QXcbConnection. (this is faster than a metacall)
         if (platformWindow->needsSync())
-            QMetaObject::invokeMethod(screenForPlatformSurface(surface)->connection(), "syncWindow", Qt::QueuedConnection, Q_ARG(QXcbWindow*, platformWindow));
+            platformWindow->postSyncWindowRequest();
     }
 }
 
diff --git a/src/plugins/platforms/xcb/qglxintegration.h b/src/plugins/platforms/xcb/qglxintegration.h
index 560dd6ab67..84910c4172 100644
--- a/src/plugins/platforms/xcb/qglxintegration.h
+++ b/src/plugins/platforms/xcb/qglxintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,7 +50,8 @@ QT_BEGIN_NAMESPACE
 class QGLXContext : public QPlatformOpenGLContext
 {
 public:
-    QGLXContext(QXcbScreen *xd, const QSurfaceFormat &format, QPlatformOpenGLContext *share);
+    QGLXContext(QXcbScreen *screen, const QSurfaceFormat &format, QPlatformOpenGLContext *share,
+                const QVariant &nativeHandle);
     ~QGLXContext();
 
     bool makeCurrent(QPlatformSurface *surface);
@@ -71,17 +64,26 @@ public:
     bool isValid() const;
 
     GLXContext glxContext() const { return m_context; }
+    GLXFBConfig glxConfig() const { return m_config; }
+
+    QVariant nativeHandle() const;
 
     static bool supportsThreading();
     static void queryDummyContext();
 
 private:
+    void init(QXcbScreen *screen, QPlatformOpenGLContext *share);
+    void init(QXcbScreen *screen, QPlatformOpenGLContext *share, const QVariant &nativeHandle);
+
+    QXcbScreen *m_screen;
     Display *m_display;
+    GLXFBConfig m_config;
     GLXContext m_context;
     GLXContext m_shareContext;
     QSurfaceFormat m_format;
     bool m_isPBufferCurrent;
     int m_swapInterval;
+    bool m_ownsContext;
     static bool m_queriedDummyContext;
     static bool m_supportsThreading;
 };
diff --git a/src/plugins/platforms/xcb/qxcbbackingstore.cpp b/src/plugins/platforms/xcb/qxcbbackingstore.cpp
index ada5b0eedf..0b9717759b 100644
--- a/src/plugins/platforms/xcb/qxcbbackingstore.cpp
+++ b/src/plugins/platforms/xcb/qxcbbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -280,13 +272,14 @@ void QXcbBackingStore::beginPaint(const QRegion &region)
 {
     if (!m_image)
         return;
-
-    m_image->preparePaint(region);
+    const int dpr = int(m_image->image()->devicePixelRatio());
+    QRegion xRegion =  dpr == 1 ? region : QTransform::fromScale(dpr,dpr).map(region);
+    m_image->preparePaint(xRegion);
 
     if (m_image->image()->hasAlphaChannel()) {
         QPainter p(m_image->image());
         p.setCompositionMode(QPainter::CompositionMode_Source);
-        const QVector<QRect> rects = region.rects();
+        const QVector<QRect> rects = xRegion.rects();
         const QColor blank = Qt::transparent;
         for (QVector<QRect>::const_iterator it = rects.begin(); it != rects.end(); ++it) {
             p.fillRect(*it, blank);
@@ -323,9 +316,13 @@ void QXcbBackingStore::flush(QWindow *window, const QRegion &region, const QPoin
         return;
     }
 
+    const int dpr = int(window->devicePixelRatio());
+
     QVector<QRect> rects = clipped.rects();
-    for (int i = 0; i < rects.size(); ++i)
-        m_image->put(platformWindow->xcb_window(), rects.at(i).topLeft(), rects.at(i).translated(offset));
+    for (int i = 0; i < rects.size(); ++i) {
+        QRect rect = QRect(rects.at(i).topLeft() * dpr, rects.at(i).size() * dpr);
+        m_image->put(platformWindow->xcb_window(), rect.topLeft(), rect.translated(offset * dpr));
+    }
 
     Q_XCB_NOOP(connection());
 
@@ -337,9 +334,10 @@ void QXcbBackingStore::flush(QWindow *window, const QRegion &region, const QPoin
 
 #ifndef QT_NO_OPENGL
 void QXcbBackingStore::composeAndFlush(QWindow *window, const QRegion &region, const QPoint &offset,
-                                       QPlatformTextureList *textures, QOpenGLContext *context)
+                                       QPlatformTextureList *textures, QOpenGLContext *context,
+                                       bool translucentBackground)
 {
-    QPlatformBackingStore::composeAndFlush(window, region, offset, textures, context);
+    QPlatformBackingStore::composeAndFlush(window, region, offset, textures, context, translucentBackground);
 
     Q_XCB_NOOP(connection());
 
@@ -354,9 +352,11 @@ void QXcbBackingStore::composeAndFlush(QWindow *window, const QRegion &region, c
 
 void QXcbBackingStore::resize(const QSize &size, const QRegion &)
 {
-    if (m_image && size == m_image->size())
-        return;
+    const int dpr = int(window()->devicePixelRatio());
+    const QSize xSize = size * dpr;
 
+    if (m_image && xSize == m_image->size())
+        return;
     Q_XCB_NOOP(connection());
 
     QXcbScreen *screen = static_cast<QXcbScreen *>(window()->screen()->handle());
@@ -368,7 +368,8 @@ void QXcbBackingStore::resize(const QSize &size, const QRegion &)
     QXcbWindow* win = static_cast<QXcbWindow *>(pw);
 
     delete m_image;
-    m_image = new QXcbShmImage(screen, size, win->depth(), win->imageFormat());
+    m_image = new QXcbShmImage(screen, xSize, win->depth(), win->imageFormat());
+    m_image->image()->setDevicePixelRatio(dpr);
     Q_XCB_NOOP(connection());
 }
 
@@ -379,12 +380,14 @@ bool QXcbBackingStore::scroll(const QRegion &area, int dx, int dy)
     if (!m_image || m_image->image()->isNull())
         return false;
 
+    const int dpr = int(m_image->image()->devicePixelRatio());
+    QRegion xArea = dpr == 1 ? area : QTransform::fromScale(dpr,dpr).map(area);
     m_image->preparePaint(area);
 
-    const QVector<QRect> rects = area.rects();
-    for (int i = 0; i < rects.size(); ++i)
-        qt_scrollRectInImage(*m_image->image(), rects.at(i), QPoint(dx, dy));
-
+    QPoint delta(dx * dpr, dy * dpr);
+    const QVector<QRect> xRects = xArea.rects();
+    for (int i = 0; i < xRects.size(); ++i)
+        qt_scrollRectInImage(*m_image->image(), xRects.at(i), delta);
     return true;
 }
 
diff --git a/src/plugins/platforms/xcb/qxcbbackingstore.h b/src/plugins/platforms/xcb/qxcbbackingstore.h
index af3c004c2d..38fb5a7ae4 100644
--- a/src/plugins/platforms/xcb/qxcbbackingstore.h
+++ b/src/plugins/platforms/xcb/qxcbbackingstore.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,7 +54,8 @@ public:
     void flush(QWindow *window, const QRegion &region, const QPoint &offset);
 #ifndef QT_NO_OPENGL
     void composeAndFlush(QWindow *window, const QRegion &region, const QPoint &offset,
-                         QPlatformTextureList *textures, QOpenGLContext *context);
+                         QPlatformTextureList *textures, QOpenGLContext *context,
+                         bool translucentBackground);
 #endif
     QImage toImage() const;
     void resize(const QSize &size, const QRegion &staticContents);
diff --git a/src/plugins/platforms/xcb/qxcbclipboard.cpp b/src/plugins/platforms/xcb/qxcbclipboard.cpp
index a5bbefcfd1..45856f3e6c 100644
--- a/src/plugins/platforms/xcb/qxcbclipboard.cpp
+++ b/src/plugins/platforms/xcb/qxcbclipboard.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -135,9 +127,10 @@ protected:
 
         (void)formats(); // trigger update of format list
 
-        QList<xcb_atom_t> atoms;
+        QVector<xcb_atom_t> atoms;
         xcb_atom_t *targets = (xcb_atom_t *) format_atoms.data();
         int size = format_atoms.size() / sizeof(xcb_atom_t);
+        atoms.reserve(size);
         for (int i = 0; i < size; ++i)
             atoms.append(targets[i]);
 
@@ -524,7 +517,7 @@ xcb_atom_t QXcbClipboard::sendTargetsSelection(QMimeData *d, xcb_window_t window
     QVector<xcb_atom_t> types;
     QStringList formats = QInternalMimeData::formatsHelper(d);
     for (int i = 0; i < formats.size(); ++i) {
-        QList<xcb_atom_t> atoms = QXcbMime::mimeAtomsForFormat(connection(), formats.at(i));
+        QVector<xcb_atom_t> atoms = QXcbMime::mimeAtomsForFormat(connection(), formats.at(i));
         for (int j = 0; j < atoms.size(); ++j) {
             if (!types.contains(atoms.at(j)))
                 types.append(atoms.at(j));
diff --git a/src/plugins/platforms/xcb/qxcbclipboard.h b/src/plugins/platforms/xcb/qxcbclipboard.h
index 03021aa606..e76d502691 100644
--- a/src/plugins/platforms/xcb/qxcbclipboard.h
+++ b/src/plugins/platforms/xcb/qxcbclipboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbconnection.cpp b/src/plugins/platforms/xcb/qxcbconnection.cpp
index f100f2d2e9..835c414d85 100644
--- a/src/plugins/platforms/xcb/qxcbconnection.cpp
+++ b/src/plugins/platforms/xcb/qxcbconnection.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,7 +65,7 @@
 #include <X11/Xlibint.h>
 #endif
 
-#if defined(XCB_USE_XINPUT2) || defined(XCB_USE_XINPUT2_MAEMO)
+#if defined(XCB_USE_XINPUT2)
 #include <X11/extensions/XInput2.h>
 #include <X11/extensions/XI2proto.h>
 #endif
@@ -92,6 +84,9 @@
 
 QT_BEGIN_NAMESPACE
 
+Q_LOGGING_CATEGORY(lcQpaXInput, "qt.qpa.input")
+Q_LOGGING_CATEGORY(lcQpaXInputDevices, "qt.qpa.input.devices")
+
 #ifdef XCB_USE_XLIB
 static const char * const xcbConnectionErrors[] = {
     "No error", /* Error 0 */
@@ -126,6 +121,39 @@ static int ioErrorHandler(Display *dpy)
 }
 #endif
 
+#if defined(XCB_HAS_XCB_GLX) && XCB_GLX_MAJOR_VERSION == 1 && XCB_GLX_MINOR_VERSION < 4
+
+#define XCB_GLX_BUFFER_SWAP_COMPLETE 1
+
+typedef struct xcb_glx_buffer_swap_complete_event_t {
+    uint8_t            response_type;
+    uint8_t            pad0;
+    uint16_t           sequence;
+    uint16_t           event_type;
+    uint8_t            pad1[2];
+    xcb_glx_drawable_t drawable;
+    uint32_t           ust_hi;
+    uint32_t           ust_lo;
+    uint32_t           msc_hi;
+    uint32_t           msc_lo;
+    uint32_t           sbc;
+} xcb_glx_buffer_swap_complete_event_t;
+#endif
+
+#if defined(XCB_USE_XLIB) && defined(XCB_USE_GLX)
+typedef struct {
+    int type;
+    unsigned long serial;       /* # of last request processed by server */
+    Bool send_event;            /* true if this came from a SendEvent request */
+    Display *display;           /* Display the event was read from */
+    Drawable drawable;  /* drawable on which event was requested in event mask */
+    int event_type;
+    int64_t ust;
+    int64_t msc;
+    int64_t sbc;
+} QGLXBufferSwapComplete;
+#endif
+
 QXcbScreen* QXcbConnection::findOrCreateScreen(QList<QXcbScreen *>& newScreens,
     int screenNumber, xcb_screen_t* xcbScreen, xcb_randr_get_output_info_reply_t *output)
 {
@@ -281,20 +309,16 @@ QXcbConnection::QXcbConnection(QXcbNativeInterface *nativeInterface, bool canGra
     , m_primaryScreen(0)
     , m_displayName(displayName ? QByteArray(displayName) : qgetenv("DISPLAY"))
     , m_nativeInterface(nativeInterface)
-#ifdef XCB_USE_XINPUT2_MAEMO
-    , m_xinputData(0)
-#endif
     , xfixes_first_event(0)
     , xrandr_first_event(0)
     , xkb_first_event(0)
+    , glx_first_event(0)
     , has_glx_extension(false)
     , has_shape_extension(false)
     , has_randr_extension(false)
     , has_input_shape(false)
     , has_touch_without_mouse_emulation(false)
     , has_xkb(false)
-    , debug_xinput_devices(false)
-    , debug_xinput(false)
     , m_buttons(0)
     , m_focusWindow(0)
     , m_systemTrayTracker(0)
@@ -362,9 +386,7 @@ QXcbConnection::QXcbConnection(QXcbNativeInterface *nativeInterface, bool canGra
     initializeXFixes();
     initializeXRender();
     m_xi2Enabled = false;
-#ifdef XCB_USE_XINPUT2_MAEMO
-    initializeXInput2Maemo();
-#elif defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
     initializeXInput2();
 #endif
     initializeXShape();
@@ -398,9 +420,7 @@ QXcbConnection::~QXcbConnection()
     delete m_drag;
 #endif
 
-#ifdef XCB_USE_XINPUT2_MAEMO
-    finalizeXInput2Maemo();
-#elif defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
     finalizeXInput2();
 #endif
 
@@ -774,8 +794,7 @@ void QXcbConnection::handleButtonPress(xcb_generic_event_t *ev)
     // the rest we need to manage ourselves
     m_buttons = (m_buttons & ~0x7) | translateMouseButtons(event->state);
     m_buttons |= translateMouseButton(event->detail);
-    if (Q_UNLIKELY(debug_xinput))
-        qDebug("xcb: pressed mouse button %d, button state %X", event->detail, static_cast<unsigned int>(m_buttons));
+    qCDebug(lcQpaXInput, "xcb: pressed mouse button %d, button state %X", event->detail, static_cast<unsigned int>(m_buttons));
 }
 
 void QXcbConnection::handleButtonRelease(xcb_generic_event_t *ev)
@@ -786,8 +805,7 @@ void QXcbConnection::handleButtonRelease(xcb_generic_event_t *ev)
     // the rest we need to manage ourselves
     m_buttons = (m_buttons & ~0x7) | translateMouseButtons(event->state);
     m_buttons &= ~translateMouseButton(event->detail);
-    if (Q_UNLIKELY(debug_xinput))
-        qDebug("xcb: released mouse button %d, button state %X", event->detail, static_cast<unsigned int>(m_buttons));
+    qCDebug(lcQpaXInput, "xcb: released mouse button %d, button state %X", event->detail, static_cast<unsigned int>(m_buttons));
 }
 
 #ifndef QT_NO_XKB
@@ -840,7 +858,7 @@ void QXcbConnection::handleXcbEvent(xcb_generic_event_t *event)
             handleButtonRelease(event);
             HANDLE_PLATFORM_WINDOW_EVENT(xcb_button_release_event_t, event, handleButtonReleaseEvent);
         case XCB_MOTION_NOTIFY:
-            if (Q_UNLIKELY(debug_xinput)) {
+            if (Q_UNLIKELY(lcQpaXInput().isDebugEnabled())) {
                 xcb_motion_notify_event_t *mev = (xcb_motion_notify_event_t *)event;
                 qDebug("xcb: moved mouse to %4d, %4d; button state %X", mev->event_x, mev->event_y, static_cast<unsigned int>(m_buttons));
             }
@@ -904,11 +922,7 @@ void QXcbConnection::handleXcbEvent(xcb_generic_event_t *event)
         case XCB_PROPERTY_NOTIFY:
             HANDLE_PLATFORM_WINDOW_EVENT(xcb_property_notify_event_t, window, handlePropertyNotifyEvent);
             break;
-#ifdef XCB_USE_XINPUT2_MAEMO
-        case GenericEvent:
-            handleGenericEventMaemo((xcb_ge_event_t*)event);
-            break;
-#elif defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
         case GenericEvent:
             if (m_xi2Enabled)
                 xi2HandleEvent(reinterpret_cast<xcb_ge_event_t *>(event));
@@ -972,14 +986,43 @@ void QXcbConnection::handleXcbEvent(xcb_generic_event_t *event)
         // XESetWireToEvent might be used by libraries to intercept messages from the X server e.g. the OpenGL lib waiting for DRI2 events.
         Display *xdisplay = (Display *)m_xlib_display;
         XLockDisplay(xdisplay);
+        bool locked = true;
         Bool (*proc)(Display*, XEvent*, xEvent*) = XESetWireToEvent(xdisplay, response_type, 0);
         if (proc) {
             XESetWireToEvent(xdisplay, response_type, proc);
             XEvent dummy;
             event->sequence = LastKnownRequestProcessed(m_xlib_display);
-            proc(xdisplay, &dummy, (xEvent*)event);
+            if (proc(xdisplay, &dummy, (xEvent*)event)) {
+#if defined(XCB_USE_GLX) && defined(XCB_HAS_XCB_GLX)
+                // DRI2 clients don't receive GLXBufferSwapComplete events on the wire.
+                // Instead the GLX event is synthesized from the DRI2BufferSwapComplete event
+                // by DRI2WireToEvent(). For an application to be able to see the event
+                // we have to convert it to an xcb_glx_buffer_swap_complete_event_t and
+                // pass it to the native event filter.
+                const uint swap_complete = glx_first_event + XCB_GLX_BUFFER_SWAP_COMPLETE;
+                if (dispatcher && has_glx_extension && uint(dummy.type) == swap_complete && response_type != swap_complete) {
+                    QGLXBufferSwapComplete *xev = reinterpret_cast<QGLXBufferSwapComplete *>(&dummy);
+                    xcb_glx_buffer_swap_complete_event_t ev;
+                    memset(&ev, 0, sizeof(xcb_glx_buffer_swap_complete_event_t));
+                    ev.response_type = xev->type;
+                    ev.sequence = xev->serial;
+                    ev.event_type = xev->event_type;
+                    ev.drawable = xev->drawable;
+                    ev.ust_hi = xev->ust >> 32;
+                    ev.ust_lo = xev->ust & 0xffffffff;
+                    ev.msc_hi = xev->msc >> 32;
+                    ev.msc_lo = xev->msc & 0xffffffff;
+                    ev.sbc = xev->sbc & 0xffffffff;
+                    // Unlock the display before calling the native event filter
+                    XUnlockDisplay(xdisplay);
+                    locked = false;
+                    handled = dispatcher->filterNativeEvent(m_nativeInterface->genericEventFilterType(), &ev, &result);
+                }
+#endif
+            }
         }
-        XUnlockDisplay(xdisplay);
+        if (locked)
+            XUnlockDisplay(xdisplay);
     }
 #endif
 
@@ -1483,9 +1526,6 @@ static const char * xcb_atomnames = {
     "Rel Vert Wheel\0"
     "Rel Horiz Scroll\0"
     "Rel Vert Scroll\0"
-#if XCB_USE_MAEMO_WINDOW_PROPERTIES
-    "_MEEGOTOUCH_ORIENTATION_ANGLE\0"
-#endif
     "_XSETTINGS_SETTINGS\0"
     "_COMPIZ_DECOR_PENDING\0"
     "_COMPIZ_DECOR_REQUEST\0"
@@ -1632,6 +1672,7 @@ void QXcbConnection::initializeGLX()
         return;
 
     has_glx_extension = true;
+    glx_first_event = reply->first_event;
 
     xcb_generic_error_t *error = 0;
     xcb_glx_query_version_cookie_t xglx_query_cookie = xcb_glx_query_version(m_connection,
@@ -1767,7 +1808,7 @@ bool QXcbConnection::hasEgl() const
 }
 #endif // defined(XCB_USE_EGL)
 
-#if defined(XCB_USE_XINPUT2) || defined(XCB_USE_XINPUT2_MAEMO)
+#if defined(XCB_USE_XINPUT2)
 static int xi2ValuatorOffset(unsigned char *maskPtr, int maskLen, int number)
 {
     int offset = 0;
@@ -1832,7 +1873,7 @@ bool QXcbConnection::xi2PrepareXIGenericDeviceEvent(xcb_ge_event_t *ev, int opCo
     }
     return false;
 }
-#endif // defined(XCB_USE_XINPUT2) || defined(XCB_USE_XINPUT2_MAEMO)
+#endif // defined(XCB_USE_XINPUT2)
 
 QXcbSystemTrayTracker *QXcbConnection::systemTrayTracker()
 {
@@ -1845,9 +1886,26 @@ QXcbSystemTrayTracker *QXcbConnection::systemTrayTracker()
     return m_systemTrayTracker;
 }
 
-void QXcbConnection::syncWindow(QXcbWindow *window)
+bool QXcbConnection::event(QEvent *e)
+{
+    if (e->type() == QEvent::User + 1) {
+        QXcbSyncWindowRequest *ev = static_cast<QXcbSyncWindowRequest *>(e);
+        QXcbWindow *w = ev->window();
+        if (w) {
+            w->updateSyncRequestCounter();
+            ev->invalidate();
+        }
+        return true;
+    }
+    return QObject::event(e);
+}
+
+void QXcbSyncWindowRequest::invalidate()
 {
-    window->updateSyncRequestCounter();
+    if (m_window) {
+        m_window->clearSyncWindowRequest();
+        m_window = 0;
+    }
 }
 
 QXcbConnectionGrabber::QXcbConnectionGrabber(QXcbConnection *connection)
diff --git a/src/plugins/platforms/xcb/qxcbconnection.h b/src/plugins/platforms/xcb/qxcbconnection.h
index 60a4efff4e..4a16e116c6 100644
--- a/src/plugins/platforms/xcb/qxcbconnection.h
+++ b/src/plugins/platforms/xcb/qxcbconnection.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,6 +44,7 @@
 #include <QVector>
 #include <QVarLengthArray>
 #include <qpa/qwindowsysteminterface.h>
+#include <QtCore/QLoggingCategory>
 
 // This is needed to make Qt compile together with XKB. xkb.h is using a variable
 // which is called 'explicit', this is a reserved keyword in c++
@@ -65,9 +58,7 @@
 #include <QTabletEvent>
 #endif
 
-#ifdef XCB_USE_XINPUT2_MAEMO
-struct XInput2MaemoData;
-#elif XCB_USE_XINPUT2
+#if XCB_USE_XINPUT2
 #include <X11/extensions/XI2.h>
 #ifdef XIScrollClass
 #define XCB_USE_XINPUT21    // XI 2.1 adds smooth scrolling support
@@ -75,7 +66,7 @@ struct XInput2MaemoData;
 #define XCB_USE_XINPUT22    // XI 2.2 adds multi-point touch support
 #endif
 #endif
-struct XInput2DeviceData;
+struct XInput2TouchDeviceData;
 #endif
 struct xcb_randr_get_output_info_reply_t;
 
@@ -83,6 +74,9 @@ struct xcb_randr_get_output_info_reply_t;
 
 QT_BEGIN_NAMESPACE
 
+Q_DECLARE_LOGGING_CATEGORY(lcQpaXInput)
+Q_DECLARE_LOGGING_CATEGORY(lcQpaXInputDevices)
+
 class QXcbScreen;
 class QXcbWindow;
 class QXcbDrag;
@@ -279,9 +273,6 @@ namespace QXcbAtom {
         RelHorizScroll,
         RelVertScroll,
 
-#if XCB_USE_MAEMO_WINDOW_PROPERTIES
-        MeegoTouchOrientationAngle,
-#endif
         _XSETTINGS_SETTINGS,
 
         _COMPIZ_DECOR_PENDING,
@@ -355,6 +346,18 @@ public:
 
 typedef QHash<xcb_window_t, QXcbWindowEventListener *> WindowMapper;
 
+class QXcbSyncWindowRequest : public QEvent
+{
+public:
+    QXcbSyncWindowRequest(QXcbWindow *w) : QEvent(QEvent::Type(QEvent::User + 1)), m_window(w) { }
+
+    QXcbWindow *window() const { return m_window; }
+    void invalidate();
+
+private:
+    QXcbWindow *m_window;
+};
+
 class QAbstractEventDispatcher;
 class QXcbConnection : public QObject
 {
@@ -399,9 +402,7 @@ public:
 #if defined(XCB_USE_EGL)
     void *egl_display() const { return m_egl_display; }
 #endif
-#ifdef XCB_USE_XINPUT2_MAEMO
-    bool isUsingXInput2Maemo();
-#elif defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
     void xi2Select(xcb_window_t window);
 #endif
 #ifdef XCB_USE_XINPUT21
@@ -452,6 +453,7 @@ public:
     void setFocusWindow(QXcbWindow *);
 
     QByteArray startupId() const { return m_startupId; }
+    void setStartupId(const QByteArray &nextId) { m_startupId = nextId; }
     void clearStartupId() { m_startupId.clear(); }
 
     void grabServer();
@@ -467,8 +469,10 @@ public:
 
     QXcbEventReader *eventReader() const { return m_reader; }
 
+protected:
+    bool event(QEvent *e) Q_DECL_OVERRIDE;
+
 public slots:
-    void syncWindow(QXcbWindow *window);
     void flush() { xcb_flush(m_connection); }
 
 private slots:
@@ -483,11 +487,6 @@ private:
     void initializeXRandr();
     void initializeXShape();
     void initializeXKB();
-#ifdef XCB_USE_XINPUT2_MAEMO
-    void initializeXInput2Maemo();
-    void finalizeXInput2Maemo();
-    void handleGenericEventMaemo(xcb_ge_event_t *event);
-#endif
     void handleClientMessageEvent(const xcb_client_message_event_t *event);
     QXcbScreen* findOrCreateScreen(QList<QXcbScreen *>& newScreens, int screenNumber,
         xcb_screen_t* xcbScreen, xcb_randr_get_output_info_reply_t *output = NULL);
@@ -501,18 +500,18 @@ private:
     void initializeXInput2();
     void finalizeXInput2();
     void xi2SetupDevices();
-    XInput2DeviceData *deviceForId(int id);
+    XInput2TouchDeviceData *touchDeviceForId(int id);
     void xi2HandleEvent(xcb_ge_event_t *event);
     void xi2HandleHierachyEvent(void *event);
     int m_xiOpCode, m_xiEventBase, m_xiErrorBase;
 #ifndef QT_NO_TABLETEVENT
     struct TabletData {
         TabletData() : deviceId(0), pointerType(QTabletEvent::UnknownPointer),
-            tool(QTabletEvent::Stylus), down(false), serialId(0), inProximity(false) { }
+            tool(QTabletEvent::Stylus), buttons(0), serialId(0), inProximity(false) { }
         int deviceId;
         QTabletEvent::PointerType pointerType;
         QTabletEvent::TabletDevice tool;
-        bool down;
+        Qt::MouseButtons buttons;
         qint64 serialId;
         bool inProximity;
         struct ValuatorClassInfo {
@@ -541,7 +540,7 @@ private:
     QHash<int, ScrollingDevice> m_scrollingDevices;
 #endif // XCB_USE_XINPUT2
 
-#if defined(XCB_USE_XINPUT2) || defined(XCB_USE_XINPUT2_MAEMO)
+#if defined(XCB_USE_XINPUT2)
     static bool xi2GetValuatorValueIfSet(void *event, int valuatorNum, double *value);
     static bool xi2PrepareXIGenericDeviceEvent(xcb_ge_event_t *event, int opCode);
 #endif
@@ -574,11 +573,9 @@ private:
     void *m_xlib_display;
 #endif
     QXcbEventReader *m_reader;
-#ifdef XCB_USE_XINPUT2_MAEMO
-    XInput2MaemoData *m_xinputData;
-#elif defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
     QHash<int, QWindowSystemInterface::TouchPoint> m_touchPoints;
-    QHash<int, XInput2DeviceData*> m_touchDevices;
+    QHash<int, XInput2TouchDeviceData*> m_touchDevices;
 #endif
 #if defined(XCB_USE_EGL)
     void *m_egl_display;
@@ -604,6 +601,7 @@ private:
     uint32_t xfixes_first_event;
     uint32_t xrandr_first_event;
     uint32_t xkb_first_event;
+    uint32_t glx_first_event;
 
     bool has_glx_extension;
     bool has_shape_extension;
@@ -611,8 +609,6 @@ private:
     bool has_input_shape;
     bool has_touch_without_mouse_emulation;
     bool has_xkb;
-    bool debug_xinput_devices;
-    bool debug_xinput;
 
     Qt::MouseButtons m_buttons;
 
diff --git a/src/plugins/platforms/xcb/qxcbconnection_maemo.cpp b/src/plugins/platforms/xcb/qxcbconnection_maemo.cpp
deleted file mode 100644
index 3b4bf0c389..0000000000
--- a/src/plugins/platforms/xcb/qxcbconnection_maemo.cpp
+++ /dev/null
@@ -1,268 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the plugins of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qxcbconnection.h"
-
-#ifdef XCB_USE_XINPUT2_MAEMO
-
-#include "qxcbwindow.h"
-#include <qpa/qwindowsysteminterface.h>
-#include <X11/extensions/XInput2.h>
-#include <X11/extensions/XI2proto.h>
-#include <X11/Xatom.h>
-
-QT_BEGIN_NAMESPACE
-
-// Define it here to work around XLib defining Bool and stuff.
-// We can't declare those variables in the header without facing include order headaches.
-struct XInput2MaemoData {
-    XInput2MaemoData()
-    : use_xinput(false)
-    , xinput_opcode(0)
-    , xinput_eventbase(0)
-    , xinput_errorbase(0)
-    , xideviceinfo(0)
-    , xibuttonclassinfo(0)
-    , xiMaxContacts(0)
-    , qtTouchDevice(0)
-    {
-    }
-    // true if Qt is compiled w/ XInput2 or Tablet support and we have a tablet.
-    bool use_xinput;
-    int xinput_opcode;
-    int xinput_eventbase;
-    int xinput_errorbase;
-    // device info for the master pointer Qt is using
-    XIDeviceInfo *xideviceinfo;
-    XIButtonClassInfo *xibuttonclassinfo;
-    int xiMaxContacts;
-    QList<QWindowSystemInterface::TouchPoint> allTouchPoints;
-    QTouchDevice *qtTouchDevice;
-};
-
-bool QXcbConnection::isUsingXInput2Maemo()
-{
-    return m_xinputData && m_xinputData->use_xinput && m_xinputData->xiMaxContacts != 0;
-}
-
-void QXcbConnection::initializeXInput2Maemo()
-{
-    Q_ASSERT(!m_xinputData);
-    m_xinputData = new XInput2MaemoData;
-    m_xinputData->use_xinput = XQueryExtension((Display *)m_xlib_display, "XInputExtension", &m_xinputData->xinput_opcode,
-                                      &m_xinputData->xinput_eventbase, &m_xinputData->xinput_errorbase);
-    if (m_xinputData->use_xinput) {
-        // we want XInput2
-        int ximajor = 2, ximinor = 0;
-        if (XIQueryVersion((Display *)m_xlib_display, &ximajor, &ximinor) == BadRequest) {
-            // XInput2 not available
-            m_xinputData->use_xinput = false;
-        } else {
-            // find the first master pointer and use this throughout Qt
-            // when making XI2 calls that need a device id (rationale is that
-            // for the time being, most setups will only have one master
-            // pointer (despite having multiple slaves)
-            int deviceCount = 0;
-            XIDeviceInfo *devices = XIQueryDevice((Display *)m_xlib_display, XIAllMasterDevices, &deviceCount);
-            if (devices) {
-                for (int i = 0; i < deviceCount; ++i) {
-                    if (devices[i].use == XIMasterPointer) {
-                        int unused = 0;
-                        m_xinputData->xideviceinfo = XIQueryDevice((Display *)m_xlib_display, devices[i].deviceid, &unused);
-                        break;
-                    }
-                }
-                XIFreeDeviceInfo(devices);
-            }
-            if (!m_xinputData->xideviceinfo)
-                qFatal("Qt: Internal error, no XI2 master pointer found.");
-
-            // find the button info
-            m_xinputData->xibuttonclassinfo = 0;
-            for (int i = 0; i < m_xinputData->xideviceinfo->num_classes; ++i) {
-                if (m_xinputData->xideviceinfo->classes[i]->type == XIButtonClass) {
-                    m_xinputData->xibuttonclassinfo = (XIButtonClassInfo *) m_xinputData->xideviceinfo->classes[i];
-                    break;
-                }
-            }
-
-            // find the "Max Contacts" property on the device
-            Atom typeReturn;
-            int formatReturn;
-            ulong countReturn, bytesReturn;
-            uchar *data = 0;
-            if (XIGetProperty((Display *)m_xlib_display,
-                              m_xinputData->xibuttonclassinfo->sourceid,
-                              atom(QXcbAtom::MaxContacts),
-                              0, 1,
-                              False,
-                              XA_INTEGER,
-                              &typeReturn,
-                              &formatReturn,
-                              &countReturn,
-                              &bytesReturn,
-                              &data) == Success
-                && data != 0
-                && typeReturn == XA_INTEGER
-                && formatReturn == 8
-                && countReturn == 1) {
-                // touch driver reported the max number of touch-points
-                m_xinputData->xiMaxContacts = data[0];
-            } else {
-                m_xinputData->xiMaxContacts = 0;
-            }
-            if (data)
-                XFree(data);
-            XFlush((Display *)m_xlib_display);
-        }
-    }
-}
-
-void QXcbConnection::finalizeXInput2Maemo()
-{
-    if (m_xinputData && m_xinputData->xideviceinfo) {
-        XIFreeDeviceInfo(m_xinputData->xideviceinfo);
-    }
-    delete m_xinputData;
-}
-
-void QXcbConnection::handleGenericEventMaemo(xcb_ge_event_t *event)
-{
-    if (m_xinputData->use_xinput && xi2PrepareXIGenericDeviceEvent(event, m_xinputData->xinput_opcode)) {
-        xXIGenericDeviceEvent* xievent = (xXIGenericDeviceEvent*)event;
-
-        // On Harmattan XInput2 is hacked to give touch points updates into standard mouse button press/motion events.
-        if (m_xinputData->xiMaxContacts != 0
-            && (xievent->evtype == XI_ButtonPress
-                || xievent->evtype == XI_ButtonRelease
-                || xievent->evtype == XI_Motion)) {
-            xXIDeviceEvent *xideviceevent = (xXIDeviceEvent *)xievent;
-            QList<QWindowSystemInterface::TouchPoint> touchPoints = m_xinputData->allTouchPoints;
-            if (touchPoints.count() != m_xinputData->xiMaxContacts) {
-                // initial event, allocate space for all (potential) touch points
-                touchPoints.reserve(m_xinputData->xiMaxContacts);
-                for (int i = 0; i < m_xinputData->xiMaxContacts; ++i) {
-                    QWindowSystemInterface::TouchPoint tp;
-                    tp.id = i;
-                    tp.state = Qt::TouchPointReleased;
-                    touchPoints << tp;
-                }
-            }
-            qreal x, y, nx, ny, w = 0.0, h = 0.0, p = -1.0;
-            int id;
-            uint active = 0;
-            for (int i = 0; i < m_xinputData->xideviceinfo->num_classes; ++i) {
-                XIAnyClassInfo *classinfo = m_xinputData->xideviceinfo->classes[i];
-                if (classinfo->type == XIValuatorClass) {
-                    XIValuatorClassInfo *valuatorclassinfo = reinterpret_cast<XIValuatorClassInfo *>(classinfo);
-                    int n = valuatorclassinfo->number;
-                    double value;
-                    if (!xi2GetValuatorValueIfSet(xideviceevent, n, &value))
-                        continue;
-
-                    if (valuatorclassinfo->label == atom(QXcbAtom::AbsMTPositionX)) {
-                        x = value;
-                        nx = (x - valuatorclassinfo->min) / (valuatorclassinfo->max - valuatorclassinfo->min);
-                    } else if (valuatorclassinfo->label == atom(QXcbAtom::AbsMTPositionY)) {
-                        y = value;
-                        ny = (y - valuatorclassinfo->min) / (valuatorclassinfo->max - valuatorclassinfo->min);
-                    } else if (valuatorclassinfo->label == atom(QXcbAtom::AbsMTTouchMajor)) {
-                        w = value;
-                    } else if (valuatorclassinfo->label == atom(QXcbAtom::AbsMTTouchMinor)) {
-                        h = value;
-                    } else if (valuatorclassinfo->label == atom(QXcbAtom::AbsMTPressure)) {
-                        p = (value - valuatorclassinfo->min) / (valuatorclassinfo->max - valuatorclassinfo->min);
-                    } else if (valuatorclassinfo->label == atom(QXcbAtom::AbsMTTrackingID)) {
-                        id = value;
-                        active |= 1 << id;
-                        QWindowSystemInterface::TouchPoint &touchPoint = touchPoints[id];
-
-                        Qt::TouchPointState newstate;
-                        if (touchPoint.state == Qt::TouchPointReleased) {
-                            newstate = Qt::TouchPointPressed;
-                        } else {
-                            if (touchPoint.area.center() != QPoint(x, y))
-                                newstate = Qt::TouchPointMoved;
-                            else
-                                newstate = Qt::TouchPointStationary;
-                        }
-
-                        touchPoint.state = newstate;
-                        touchPoint.area = QRectF(x - w/2, y - h/2, w, h);
-                        touchPoint.normalPosition = QPointF(nx, ny);
-                        touchPoint.pressure = p;
-                    }
-                }
-            }
-
-            // mark previously-active-but-now-inactive touch points as released
-            for (int i = 0; i < touchPoints.count(); ++i)
-                if (!(active & (1 << i)) && touchPoints.at(i).state != Qt::TouchPointReleased)
-                    touchPoints[i].state = Qt::TouchPointReleased;
-
-            if (QXcbWindow *platformWindow = platformWindowFromId(xideviceevent->event)) {
-                QTouchDevice *dev = m_xinputData->qtTouchDevice;
-                if (!dev) {
-                    dev = new QTouchDevice;
-                    dev->setType(QTouchDevice::TouchScreen);
-                    dev->setCapabilities(QTouchDevice::Position | QTouchDevice::Area | QTouchDevice::Pressure | QTouchDevice::NormalizedPosition);
-                    QWindowSystemInterface::registerTouchDevice(dev);
-                    m_xinputData->qtTouchDevice = dev;
-                }
-                QWindowSystemInterface::handleTouchEvent(platformWindow->window(), xideviceevent->time, dev, touchPoints);
-            }
-
-            if (xideviceevent->evtype == XI_ButtonRelease) {
-                // final event, forget touch state
-                m_xinputData->allTouchPoints.clear();
-            } else {
-                // save current state so that we have something to reuse later
-                m_xinputData->allTouchPoints = touchPoints;
-            }
-
-        }
-    }
-}
-
-QT_END_NAMESPACE
-
-#endif // XCB_USE_XINPUT2_MAEMO
-
diff --git a/src/plugins/platforms/xcb/qxcbconnection_xi2.cpp b/src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
index 643a0351e3..90d323ed34 100644
--- a/src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
+++ b/src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,8 +45,8 @@
 #include <X11/extensions/XI2proto.h>
 #define FINGER_MAX_WIDTH_MM 10
 
-struct XInput2DeviceData {
-    XInput2DeviceData()
+struct XInput2TouchDeviceData {
+    XInput2TouchDeviceData()
     : xiDeviceInfo(0)
     , qtTouchDevice(0)
     {
@@ -71,8 +63,11 @@ struct XInput2DeviceData {
 
 void QXcbConnection::initializeXInput2()
 {
-    debug_xinput = qEnvironmentVariableIsSet("QT_XCB_DEBUG_XINPUT");
-    debug_xinput_devices = qEnvironmentVariableIsSet("QT_XCB_DEBUG_XINPUT_DEVICES");
+    // TODO Qt 6 (or perhaps earlier): remove these redundant env variables
+    if (qEnvironmentVariableIsSet("QT_XCB_DEBUG_XINPUT"))
+        const_cast<QLoggingCategory&>(lcQpaXInput()).setEnabled(QtDebugMsg, true);
+    if (qEnvironmentVariableIsSet("QT_XCB_DEBUG_XINPUT_DEVICES"))
+        const_cast<QLoggingCategory&>(lcQpaXInputDevices()).setEnabled(QtDebugMsg, true);
     Display *xDisplay = static_cast<Display *>(m_xlib_display);
     if (XQueryExtension(xDisplay, "XInputExtension", &m_xiOpCode, &m_xiEventBase, &m_xiErrorBase)) {
         int xiMajor = 2;
@@ -87,11 +82,10 @@ void QXcbConnection::initializeXInput2()
         } else
             m_xi2Enabled = true;
         if (m_xi2Enabled) {
-            if (Q_UNLIKELY(debug_xinput_devices))
 #ifdef XCB_USE_XINPUT22
-                qDebug("XInput version %d.%d is available and Qt supports 2.2 or greater", xiMajor, m_xi2Minor);
+            qCDebug(lcQpaXInputDevices, "XInput version %d.%d is available and Qt supports 2.2 or greater", xiMajor, m_xi2Minor);
 #else
-                qDebug("XInput version %d.%d is available and Qt supports 2.0", xiMajor, m_xi2Minor);
+            qCDebug(lcQpaXInputDevices, "XInput version %d.%d is available and Qt supports 2.0", xiMajor, m_xi2Minor);
 #endif
         }
 
@@ -116,8 +110,7 @@ void QXcbConnection::xi2SetupDevices()
         // Only non-master pointing devices are relevant here.
         if (devices[i].use != XISlavePointer)
             continue;
-        if (Q_UNLIKELY(debug_xinput_devices))
-            qDebug() << "input device "<< devices[i].name;
+        qCDebug(lcQpaXInputDevices) << "input device "<< devices[i].name;
 #ifndef QT_NO_TABLETEVENT
         TabletData tabletData;
 #endif
@@ -127,8 +120,7 @@ void QXcbConnection::xi2SetupDevices()
             case XIValuatorClass: {
                 XIValuatorClassInfo *vci = reinterpret_cast<XIValuatorClassInfo *>(devices[i].classes[c]);
                 const int valuatorAtom = qatom(vci->label);
-                if (Q_UNLIKELY(debug_xinput_devices))
-                    qDebug() << "   has valuator" << atomName(vci->label) << "recognized?" << (valuatorAtom < QXcbAtom::NAtoms);
+                qCDebug(lcQpaXInputDevices) << "   has valuator" << atomName(vci->label) << "recognized?" << (valuatorAtom < QXcbAtom::NAtoms);
 #ifndef QT_NO_TABLETEVENT
                 if (valuatorAtom < QXcbAtom::NAtoms) {
                     TabletData::ValuatorClassInfo info;
@@ -176,27 +168,60 @@ void QXcbConnection::xi2SetupDevices()
                     if ((!label6 || qatom(label6) == QXcbAtom::ButtonHorizWheelLeft) && (!label7 || qatom(label7) == QXcbAtom::ButtonHorizWheelRight))
                         scrollingDevice.legacyOrientations |= Qt::Horizontal;
                 }
+                qCDebug(lcQpaXInputDevices, "   has %d buttons", bci->num_buttons);
                 break;
             }
 #endif
+            case XIKeyClass:
+                qCDebug(lcQpaXInputDevices) << "   it's a keyboard";
+                break;
+            case XITouchClass:
+                // will be handled in deviceForId()
+                break;
             default:
+                qCDebug(lcQpaXInputDevices) << "   has class" << devices[i].classes[c]->type;
                 break;
             }
         }
         bool isTablet = false;
 #ifndef QT_NO_TABLETEVENT
-        // If we have found the valuators which we expect a tablet to have, assume it's a tablet.
+        // If we have found the valuators which we expect a tablet to have, it might be a tablet.
         if (tabletData.valuatorInfo.contains(QXcbAtom::AbsX) &&
                 tabletData.valuatorInfo.contains(QXcbAtom::AbsY) &&
-                tabletData.valuatorInfo.contains(QXcbAtom::AbsPressure)) {
-            tabletData.deviceId = devices[i].deviceid;
+                tabletData.valuatorInfo.contains(QXcbAtom::AbsPressure))
+            isTablet = true;
+
+        // But we need to be careful not to take the touch and tablet-button devices as tablets.
+        QByteArray name = QByteArray(devices[i].name).toLower();
+        QString dbgType = QLatin1String("UNKNOWN");
+        if (name.contains("eraser")) {
+            isTablet = true;
+            tabletData.pointerType = QTabletEvent::Eraser;
+            dbgType = QLatin1String("eraser");
+        } else if (name.contains("cursor")) {
+            isTablet = true;
+            tabletData.pointerType = QTabletEvent::Cursor;
+            dbgType = QLatin1String("cursor");
+        } else if ((name.contains("pen") || name.contains("stylus")) && isTablet) {
             tabletData.pointerType = QTabletEvent::Pen;
-            if (QByteArray(devices[i].name).toLower().contains("eraser"))
-                tabletData.pointerType = QTabletEvent::Eraser;
-            m_tabletData.append(tabletData);
+            dbgType = QLatin1String("pen");
+        } else if (name.contains("wacom") && isTablet && !name.contains("touch")) {
+            // combined device (evdev) rather than separate pen/eraser (wacom driver)
+            tabletData.pointerType = QTabletEvent::Pen;
+            dbgType = QLatin1String("pen");
+        } else if (name.contains("aiptek") /* && device == QXcbAtom::KEYBOARD */) {
+            // some "Genius" tablets
             isTablet = true;
-            if (Q_UNLIKELY(debug_xinput_devices))
-                qDebug() << "   it's a tablet with pointer type" << tabletData.pointerType;
+            tabletData.pointerType = QTabletEvent::Pen;
+            dbgType = QLatin1String("pen");
+        } else {
+            isTablet = false;
+        }
+
+        if (isTablet) {
+            tabletData.deviceId = devices[i].deviceid;
+            m_tabletData.append(tabletData);
+            qCDebug(lcQpaXInputDevices) << "   it's a tablet with pointer type" << dbgType;
         }
 #endif // QT_NO_TABLETEVENT
 
@@ -206,23 +231,24 @@ void QXcbConnection::xi2SetupDevices()
             // Only use legacy wheel button events when we don't have real scroll valuators.
             scrollingDevice.legacyOrientations &= ~scrollingDevice.orientations;
             m_scrollingDevices.insert(scrollingDevice.deviceId, scrollingDevice);
-            if (Q_UNLIKELY(debug_xinput_devices))
-                qDebug() << "   it's a scrolling device";
+            qCDebug(lcQpaXInputDevices) << "   it's a scrolling device";
         }
 #endif
 
         if (!isTablet) {
-            XInput2DeviceData *dev = deviceForId(devices[i].deviceid);
-            if (Q_UNLIKELY(debug_xinput_devices)) {
-                if (dev && dev->qtTouchDevice->type() == QTouchDevice::TouchScreen)
-                    qDebug("   it's a touchscreen with type %d capabilities 0x%X max touch points %d",
-                           dev->qtTouchDevice->type(), (unsigned int)dev->qtTouchDevice->capabilities(),
-                           dev->qtTouchDevice->maximumTouchPoints());
-                else if (dev && dev->qtTouchDevice->type() == QTouchDevice::TouchPad)
-                    qDebug("   it's a touchpad with type %d capabilities 0x%X max touch points %d size %f x %f",
-                           dev->qtTouchDevice->type(), (unsigned int)dev->qtTouchDevice->capabilities(),
-                           dev->qtTouchDevice->maximumTouchPoints(),
-                           dev->size.width(), dev->size.height());
+            // touchDeviceForId populates XInput2DeviceData the first time it is called
+            // with a new deviceId. On subsequent calls it will return the cached object.
+            XInput2TouchDeviceData *dev = touchDeviceForId(devices[i].deviceid);
+            if (dev && lcQpaXInputDevices().isDebugEnabled()) {
+                if (dev->qtTouchDevice->type() == QTouchDevice::TouchScreen)
+                    qCDebug(lcQpaXInputDevices, "   it's a touchscreen with type %d capabilities 0x%X max touch points %d",
+                            dev->qtTouchDevice->type(), (unsigned int)dev->qtTouchDevice->capabilities(),
+                            dev->qtTouchDevice->maximumTouchPoints());
+                else if (dev->qtTouchDevice->type() == QTouchDevice::TouchPad)
+                    qCDebug(lcQpaXInputDevices, "   it's a touchpad with type %d capabilities 0x%X max touch points %d size %f x %f",
+                            dev->qtTouchDevice->type(), (unsigned int)dev->qtTouchDevice->capabilities(),
+                            dev->qtTouchDevice->maximumTouchPoints(),
+                            dev->size.width(), dev->size.height());
             }
         }
     }
@@ -231,7 +257,7 @@ void QXcbConnection::xi2SetupDevices()
 
 void QXcbConnection::finalizeXInput2()
 {
-    foreach (XInput2DeviceData *dev, m_touchDevices) {
+    foreach (XInput2TouchDeviceData *dev, m_touchDevices) {
         if (dev->xiDeviceInfo)
             XIFreeDeviceInfo(dev->xiDeviceInfo);
         delete dev;
@@ -327,13 +353,13 @@ void QXcbConnection::xi2Select(xcb_window_t window)
     }
 }
 
-XInput2DeviceData *QXcbConnection::deviceForId(int id)
+XInput2TouchDeviceData *QXcbConnection::touchDeviceForId(int id)
 {
-    XInput2DeviceData *dev = m_touchDevices[id];
+    XInput2TouchDeviceData *dev = m_touchDevices[id];
     if (!dev) {
         int nrDevices = 0;
         QTouchDevice::Capabilities caps = 0;
-        dev = new XInput2DeviceData;
+        dev = new XInput2TouchDeviceData;
         dev->xiDeviceInfo = XIQueryDevice(static_cast<Display *>(m_xlib_display), id, &nrDevices);
         if (nrDevices <= 0) {
             delete dev;
@@ -349,8 +375,7 @@ XInput2DeviceData *QXcbConnection::deviceForId(int id)
             case XITouchClass: {
                 XITouchClassInfo *tci = reinterpret_cast<XITouchClassInfo *>(classinfo);
                 maxTouchPoints = tci->num_touches;
-                if (Q_UNLIKELY(debug_xinput_devices))
-                    qDebug("   has touch class with mode %d", tci->mode);
+                qCDebug(lcQpaXInputDevices, "   has touch class with mode %d", tci->mode);
                 switch (tci->mode) {
                 case XIDependentTouch:
                     type = QTouchDevice::TouchPad;
@@ -376,9 +401,15 @@ XInput2DeviceData *QXcbConnection::deviceForId(int id)
                 } else if (vci->label == atom(QXcbAtom::RelY)) {
                     hasRelativeCoords = true;
                     dev->size.setHeight((vci->max - vci->min) * 1000.0 / vci->resolution);
+                } else if (vci->label == atom(QXcbAtom::AbsX)) {
+                    dev->size.setHeight((vci->max - vci->min) * 1000.0 / vci->resolution);
+                } else if (vci->label == atom(QXcbAtom::AbsY)) {
+                    dev->size.setWidth((vci->max - vci->min) * 1000.0 / vci->resolution);
                 }
                 break;
             }
+            default:
+                break;
             }
         }
         if (type < 0 && caps && hasRelativeCoords) {
@@ -409,7 +440,7 @@ XInput2DeviceData *QXcbConnection::deviceForId(int id)
 #if defined(XCB_USE_XINPUT21) || !defined(QT_NO_TABLETEVENT)
 static qreal fixed1616ToReal(FP1616 val)
 {
-    return (qreal(val >> 16)) + (val & 0xFF) / (qreal)0xFF;
+    return (qreal(val >> 16)) + (val & 0xFFFF) / (qreal)0xFFFF;
 }
 #endif // defined(XCB_USE_XINPUT21) || !defined(QT_NO_TABLETEVENT)
 
@@ -451,14 +482,14 @@ void QXcbConnection::xi2HandleEvent(xcb_ge_event_t *event)
 #ifdef XCB_USE_XINPUT22
         if (xiEvent->evtype == XI_TouchBegin || xiEvent->evtype == XI_TouchUpdate || xiEvent->evtype == XI_TouchEnd) {
             xXIDeviceEvent* xiDeviceEvent = reinterpret_cast<xXIDeviceEvent *>(event);
-            if (Q_UNLIKELY(debug_xinput))
-                qDebug("XI2 touch event type %d seq %d detail %d pos %6.1f, %6.1f root pos %6.1f, %6.1f",
-                    event->event_type, xiEvent->sequenceNumber, xiDeviceEvent->detail,
-                    fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y),
-                    fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y) );
+            if (Q_UNLIKELY(lcQpaXInput().isDebugEnabled()))
+                qCDebug(lcQpaXInput, "XI2 touch event type %d seq %d detail %d pos %6.1f, %6.1f root pos %6.1f, %6.1f",
+                        event->event_type, xiEvent->sequenceNumber, xiDeviceEvent->detail,
+                        fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y),
+                        fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y) );
 
             if (QXcbWindow *platformWindow = platformWindowFromId(xiDeviceEvent->event)) {
-                XInput2DeviceData *dev = deviceForId(xiDeviceEvent->sourceid);
+                XInput2TouchDeviceData *dev = touchDeviceForId(xiDeviceEvent->sourceid);
                 Q_ASSERT(dev);
                 const bool firstTouch = m_touchPoints.isEmpty();
                 if (xiEvent->evtype == XI_TouchBegin) {
@@ -481,13 +512,17 @@ void QXcbConnection::xi2HandleEvent(xcb_ge_event_t *event)
                         double value;
                         if (!xi2GetValuatorValueIfSet(xiDeviceEvent, n, &value))
                             continue;
-                        if (Q_UNLIKELY(debug_xinput))
-                            qDebug("   valuator %20s value %lf from range %lf -> %lf",
-                                atomName(vci->label).constData(), value, vci->min, vci->max );
+                        if (Q_UNLIKELY(lcQpaXInput().isDebugEnabled()))
+                            qCDebug(lcQpaXInput, "   valuator %20s value %lf from range %lf -> %lf",
+                                    atomName(vci->label).constData(), value, vci->min, vci->max );
                         if (vci->label == atom(QXcbAtom::RelX)) {
                             nx = valuatorNormalized(value, vci);
                         } else if (vci->label == atom(QXcbAtom::RelY)) {
                             ny = valuatorNormalized(value, vci);
+                        } else if (vci->label == atom(QXcbAtom::AbsX)) {
+                            nx = valuatorNormalized(value, vci);
+                        } else if (vci->label == atom(QXcbAtom::AbsY)) {
+                            ny = valuatorNormalized(value, vci);
                         } else if (vci->label == atom(QXcbAtom::AbsMTPositionX)) {
                             nx = valuatorNormalized(value, vci);
                         } else if (vci->label == atom(QXcbAtom::AbsMTPositionY)) {
@@ -559,9 +594,9 @@ void QXcbConnection::xi2HandleEvent(xcb_ge_event_t *event)
                 touchPoint.area = QRectF(x - w/2, y - h/2, w, h);
                 touchPoint.normalPosition = QPointF(nx, ny);
 
-                if (Q_UNLIKELY(debug_xinput))
-                    qDebug() << "   touchpoint "  << touchPoint.id << " state " << touchPoint.state << " pos norm " << touchPoint.normalPosition <<
-                        " area " << touchPoint.area << " pressure " << touchPoint.pressure;
+                if (Q_UNLIKELY(lcQpaXInput().isDebugEnabled()))
+                    qCDebug(lcQpaXInput) << "   touchpoint "  << touchPoint.id << " state " << touchPoint.state << " pos norm " << touchPoint.normalPosition <<
+                            " area " << touchPoint.area << " pressure " << touchPoint.pressure;
                 QWindowSystemInterface::handleTouchEvent(platformWindow->window(), xiEvent->time, dev->qtTouchDevice, m_touchPoints.values());
                 if (touchPoint.state == Qt::TouchPointReleased)
                     // If a touchpoint was released, we can forget it, because the ID won't be reused.
@@ -650,8 +685,9 @@ void QXcbConnection::xi2HandleScrollEvent(void *event, ScrollingDevice &scrollin
                 }
             }
             if (!angleDelta.isNull()) {
-                QPoint local(fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y));
-                QPoint global(fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y));
+                const int dpr = int(platformWindow->devicePixelRatio());
+                QPoint local(fixed1616ToReal(xiDeviceEvent->event_x)/dpr, fixed1616ToReal(xiDeviceEvent->event_y)/dpr);
+                QPoint global(fixed1616ToReal(xiDeviceEvent->root_x)/dpr, fixed1616ToReal(xiDeviceEvent->root_y)/dpr);
                 Qt::KeyboardModifiers modifiers = keyboard()->translateModifiers(xiDeviceEvent->mods.effective_mods);
                 if (modifiers & Qt::AltModifier) {
                     std::swap(angleDelta.rx(), angleDelta.ry());
@@ -677,8 +713,9 @@ void QXcbConnection::xi2HandleScrollEvent(void *event, ScrollingDevice &scrollin
                     angleDelta.setX(-120);
             }
             if (!angleDelta.isNull()) {
-                QPoint local(fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y));
-                QPoint global(fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y));
+                const int dpr = int(platformWindow->devicePixelRatio());
+                QPoint local(fixed1616ToReal(xiDeviceEvent->event_x)/dpr, fixed1616ToReal(xiDeviceEvent->event_y)/dpr);
+                QPoint global(fixed1616ToReal(xiDeviceEvent->root_x)/dpr, fixed1616ToReal(xiDeviceEvent->root_y)/dpr);
                 Qt::KeyboardModifiers modifiers = keyboard()->translateModifiers(xiDeviceEvent->mods.effective_mods);
                 if (modifiers & Qt::AltModifier)
                     std::swap(angleDelta.rx(), angleDelta.ry());
@@ -692,6 +729,19 @@ void QXcbConnection::xi2HandleScrollEvent(void *event, ScrollingDevice &scrollin
 #endif // XCB_USE_XINPUT21
 }
 
+static Qt::MouseButton xiToQtMouseButton(uint32_t b) {
+    switch (b) {
+    case 1: return Qt::LeftButton;
+    case 2: return Qt::MiddleButton;
+    case 3: return Qt::RightButton;
+    // 4-7 are for scrolling
+    default: break;
+    }
+    if (b >= 8 && b <= Qt::MaxMouseButton)
+        return static_cast<Qt::MouseButton>(Qt::BackButton << (b - 8));
+    return Qt::NoButton;
+}
+
 static QTabletEvent::TabletDevice toolIdToTabletDevice(quint32 toolId) {
     // keep in sync with wacom_intuos_inout() in Linux kernel driver wacom_wac.c
     switch (toolId) {
@@ -732,24 +782,22 @@ bool QXcbConnection::xi2HandleTabletEvent(void *event, TabletData *tabletData)
     Display *xDisplay = static_cast<Display *>(m_xlib_display);
     xXIGenericDeviceEvent *xiEvent = static_cast<xXIGenericDeviceEvent *>(event);
     switch (xiEvent->evtype) {
-    case XI_ButtonPress: // stylus down
-        if (reinterpret_cast<xXIDeviceEvent *>(event)->detail == 1) { // ignore the physical buttons on the stylus
-            tabletData->down = true;
-            xi2ReportTabletEvent(*tabletData, xiEvent);
-        } else
-            handled = false;
+    case XI_ButtonPress: {
+        Qt::MouseButton b = xiToQtMouseButton(reinterpret_cast<xXIDeviceEvent *>(event)->detail);
+        tabletData->buttons |= b;
+        xi2ReportTabletEvent(*tabletData, xiEvent);
         break;
-    case XI_ButtonRelease: // stylus up
-        if (reinterpret_cast<xXIDeviceEvent *>(event)->detail == 1) {
-            tabletData->down = false;
-            xi2ReportTabletEvent(*tabletData, xiEvent);
-        } else
-            handled = false;
+    }
+    case XI_ButtonRelease: {
+        Qt::MouseButton b = xiToQtMouseButton(reinterpret_cast<xXIDeviceEvent *>(event)->detail);
+        tabletData->buttons ^= b;
+        xi2ReportTabletEvent(*tabletData, xiEvent);
         break;
+    }
     case XI_Motion:
-        // Report TabletMove only when the stylus is touching the tablet.
-        // No possibility to report proximity motion (no suitable Qt event exists yet).
-        if (tabletData->down)
+        // Report TabletMove only when the stylus is touching the tablet or any button is pressed.
+        // TODO: report proximity (hover) motion (no suitable Qt event exists yet).
+        if (tabletData->buttons != Qt::NoButton)
             xi2ReportTabletEvent(*tabletData, xiEvent);
         break;
     case XI_PropertyEvent: {
@@ -801,13 +849,11 @@ bool QXcbConnection::xi2HandleTabletEvent(void *event, TabletData *tabletData)
                                                                                     tabletData->pointerType,
                                                                                     tabletData->serialId);
                         }
-                        if (Q_UNLIKELY(debug_xinput)) {
-                            // TODO maybe have a hash of tabletData->deviceId to device data so we can
-                            // look up the tablet name here, and distinguish multiple tablets
-                            qDebug("XI2 proximity change on tablet %d (USB %x): last tool: %x id %x current tool: %x id %x TabletDevice %d",
-                                ev->deviceid, ptr[_WACSER_USB_ID], ptr[_WACSER_LAST_TOOL_SERIAL], ptr[_WACSER_LAST_TOOL_ID],
-                                ptr[_WACSER_TOOL_SERIAL], ptr[_WACSER_TOOL_ID], tabletData->tool);
-                        }
+                        // TODO maybe have a hash of tabletData->deviceId to device data so we can
+                        // look up the tablet name here, and distinguish multiple tablets
+                        qCDebug(lcQpaXInput, "XI2 proximity change on tablet %d (USB %x): last tool: %x id %x current tool: %x id %x TabletDevice %d",
+                            ev->deviceid, ptr[_WACSER_USB_ID], ptr[_WACSER_LAST_TOOL_SERIAL], ptr[_WACSER_LAST_TOOL_ID],
+                            ptr[_WACSER_TOOL_SERIAL], ptr[_WACSER_TOOL_ID], tabletData->tool);
                     }
                     XFree(data);
                 }
@@ -868,16 +914,17 @@ void QXcbConnection::xi2ReportTabletEvent(TabletData &tabletData, void *event)
         }
     }
 
-    if (Q_UNLIKELY(debug_xinput))
-        qDebug("XI2 event on tablet %d with tool %d type %d seq %d detail %d pos %6.1f, %6.1f root pos %6.1f, %6.1f pressure %4.2lf tilt %d, %d rotation %6.2lf",
-            ev->deviceid, tabletData.tool, ev->type, ev->sequenceNumber, ev->detail,
+    if (Q_UNLIKELY(lcQpaXInput().isDebugEnabled()))
+        qCDebug(lcQpaXInput, "XI2 event on tablet %d with tool %d type %d seq %d detail %d pos %6.1f, %6.1f root pos %6.1f, %6.1f buttons 0x%x pressure %4.2lf tilt %d, %d rotation %6.2lf",
+            ev->deviceid, tabletData.tool, ev->evtype, ev->sequenceNumber, ev->detail,
             fixed1616ToReal(ev->event_x), fixed1616ToReal(ev->event_y),
             fixed1616ToReal(ev->root_x), fixed1616ToReal(ev->root_y),
-            pressure, xTilt, yTilt, rotation);
+            (int)tabletData.buttons, pressure, xTilt, yTilt, rotation);
 
-    QWindowSystemInterface::handleTabletEvent(window, tabletData.down, local, global,
+    QWindowSystemInterface::handleTabletEvent(window, local, global,
                                               tabletData.tool, tabletData.pointerType,
-                                              pressure, xTilt, yTilt, tangentialPressure,
+                                              tabletData.buttons, pressure,
+                                              xTilt, yTilt, tangentialPressure,
                                               rotation, 0, tabletData.serialId);
 }
 #endif // QT_NO_TABLETEVENT
diff --git a/src/plugins/platforms/xcb/qxcbcursor.cpp b/src/plugins/platforms/xcb/qxcbcursor.cpp
index 6dbac90e0c..0509bdcb84 100644
--- a/src/plugins/platforms/xcb/qxcbcursor.cpp
+++ b/src/plugins/platforms/xcb/qxcbcursor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -629,16 +621,18 @@ void QXcbCursor::queryPointer(QXcbConnection *c, xcb_window_t *rootWin, QPoint *
 
 QPoint QXcbCursor::pos() const
 {
+    const int dpr = int(m_screen->devicePixelRatio());
     QPoint p;
     queryPointer(connection(), 0, &p);
-    return p;
+    return p / dpr;
 }
 
 void QXcbCursor::setPos(const QPoint &pos)
 {
+    const int dpr = int(m_screen->devicePixelRatio());
     xcb_window_t root = 0;
     queryPointer(connection(), &root, 0);
-    xcb_warp_pointer(xcb_connection(), XCB_NONE, root, 0, 0, 0, 0, pos.x(), pos.y());
+    xcb_warp_pointer(xcb_connection(), XCB_NONE, root, 0, 0, 0, 0, pos.x()*dpr, pos.y()*dpr);
     xcb_flush(xcb_connection());
 }
 
diff --git a/src/plugins/platforms/xcb/qxcbcursor.h b/src/plugins/platforms/xcb/qxcbcursor.h
index f224aae4e0..8ed23154ed 100644
--- a/src/plugins/platforms/xcb/qxcbcursor.h
+++ b/src/plugins/platforms/xcb/qxcbcursor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbdrag.cpp b/src/plugins/platforms/xcb/qxcbdrag.cpp
index 4f0f57c375..53437f24ae 100644
--- a/src/plugins/platforms/xcb/qxcbdrag.cpp
+++ b/src/plugins/platforms/xcb/qxcbdrag.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -183,7 +175,7 @@ void QXcbDrag::startDrag()
 
     QStringList fmts = QXcbMime::formatsHelper(drag()->mimeData());
     for (int i = 0; i < fmts.size(); ++i) {
-        QList<xcb_atom_t> atoms = QXcbMime::mimeAtomsForFormat(connection(), fmts.at(i));
+        QVector<xcb_atom_t> atoms = QXcbMime::mimeAtomsForFormat(connection(), fmts.at(i));
         for (int j = 0; j < atoms.size(); ++j) {
             if (!drag_types.contains(atoms.at(j)))
                 drag_types.append(atoms.at(j));
@@ -242,9 +234,16 @@ xcb_window_t QXcbDrag::findRealWindow(const QPoint & pos, xcb_window_t w, int md
         if (reply->map_state != XCB_MAP_STATE_VIEWABLE)
             return 0;
 
+        free(reply);
+
         xcb_get_geometry_cookie_t gcookie = xcb_get_geometry(xcb_connection(), w);
         xcb_get_geometry_reply_t *greply = xcb_get_geometry_reply(xcb_connection(), gcookie, 0);
-        if (reply && QRect(greply->x, greply->y, greply->width, greply->height).contains(pos)) {
+        if (!greply)
+            return 0;
+
+        QRect windowRect(greply->x, greply->y, greply->width, greply->height);
+        free(greply);
+        if (windowRect.contains(pos)) {
             bool windowContainsMouse = !ignoreNonXdndAwareWindows;
             {
                 xcb_get_property_cookie_t cookie =
@@ -255,7 +254,7 @@ xcb_window_t QXcbDrag::findRealWindow(const QPoint & pos, xcb_window_t w, int md
                 bool isAware = reply && reply->type != XCB_NONE;
                 free(reply);
                 if (isAware) {
-                    const QPoint relPos = pos - QPoint(greply->x, greply->y);
+                    const QPoint relPos = pos - windowRect.topLeft();
                     // When ShapeInput and ShapeBounding are not set they return a single rectangle with the geometry of the window, this is why we
                     // need to check both here so that in the case one is set and the other is not we still get the correct result.
                     if (connection()->hasInputShape())
@@ -279,7 +278,7 @@ xcb_window_t QXcbDrag::findRealWindow(const QPoint & pos, xcb_window_t w, int md
 
             xcb_window_t r = 0;
             for (uint i = nc; !r && i--;)
-                r = findRealWindow(pos - QPoint(greply->x, greply->y), c[i], md-1, ignoreNonXdndAwareWindows);
+                r = findRealWindow(pos - windowRect.topLeft(), c[i], md-1, ignoreNonXdndAwareWindows);
 
             free(reply);
             if (r)
@@ -300,6 +299,11 @@ xcb_window_t QXcbDrag::findRealWindow(const QPoint & pos, xcb_window_t w, int md
 
 void QXcbDrag::move(const QMouseEvent *me)
 {
+    // The mouse event is in the coordinate system of the window that started the drag.
+    // We do not know which window that was at this point, so we just use the device pixel ratio
+    // of the QGuiApplication. This will break once we support screens with different DPR. Fixing
+    // this properly requires some redesign of the drag and drop architecture.
+    static const int dpr = int(qApp->devicePixelRatio());
     QBasicDrag::move(me);
     QPoint globalPos = me->globalPos();
 
@@ -336,7 +340,7 @@ void QXcbDrag::move(const QMouseEvent *me)
 //    qt_xdnd_current_screen = screen;
     xcb_window_t rootwin = current_screen->root();
     xcb_translate_coordinates_reply_t *translate =
-            ::translateCoordinates(connection(), rootwin, rootwin, globalPos.x(), globalPos.y());
+            ::translateCoordinates(connection(), rootwin, rootwin, globalPos.x() * dpr, globalPos.y() * dpr);
     if (!translate)
         return;
 
@@ -401,7 +405,7 @@ void QXcbDrag::move(const QMouseEvent *me)
     int target_version = 1;
 
     if (proxy_target) {
-        xcb_get_property_cookie_t cookie = xcb_get_property(xcb_connection(), false, target,
+        xcb_get_property_cookie_t cookie = xcb_get_property(xcb_connection(), false, proxy_target,
                                                             atom(QXcbAtom::XdndAware), XCB_GET_PROPERTY_TYPE_ANY, 0, 1);
         xcb_get_property_reply_t *reply = xcb_get_property_reply(xcb_connection(), cookie, 0);
         if (!reply || reply->type == XCB_NONE)
@@ -459,7 +463,7 @@ void QXcbDrag::move(const QMouseEvent *me)
         move.type = atom(QXcbAtom::XdndPosition);
         move.data.data32[0] = connection()->clipboard()->owner();
         move.data.data32[1] = 0; // flags
-        move.data.data32[2] = (globalPos.x() << 16) + globalPos.y();
+        move.data.data32[2] = (globalPos.x() * dpr << 16) + globalPos.y() * dpr;
         move.data.data32[3] = connection()->time();
         move.data.data32[4] = toXdndAction(defaultAction(currentDrag()->supportedActions(), QGuiApplication::keyboardModifiers()));
         DEBUG() << "sending Xdnd position source=" << move.data.data32[0] << "target=" << move.window;
@@ -705,7 +709,9 @@ void QXcbDrag::handle_xdnd_position(QWindow *w, const xcb_client_message_event_t
     QPoint p((e->data.data32[2] & 0xffff0000) >> 16, e->data.data32[2] & 0x0000ffff);
     Q_ASSERT(w);
     QRect geometry = w->geometry();
+    const int dpr = int(w->handle()->devicePixelRatio());
 
+    p /= dpr;
     p -= geometry.topLeft();
 
     if (!w || (w->type() == Qt::Desktop))
@@ -824,10 +830,12 @@ void QXcbDrag::handle_xdnd_status(const xcb_client_message_event_t *event)
         updateCursor(Qt::IgnoreAction);
     }
 
+    static const int dpr = int(qApp->devicePixelRatio());
+
     if ((event->data.data32[1] & 2) == 0) {
         QPoint p((event->data.data32[2] & 0xffff0000) >> 16, event->data.data32[2] & 0x0000ffff);
         QSize s((event->data.data32[3] & 0xffff0000) >> 16, event->data.data32[3] & 0x0000ffff);
-        source_sameanswer = QRect(p, s);
+        source_sameanswer = QRect(p / dpr, s / dpr);
     } else {
         source_sameanswer = QRect();
     }
@@ -1010,9 +1018,6 @@ void QXcbDrag::handleFinished(const xcb_client_message_event_t *event)
 //            current_target = 0;
 //            current_proxy_target = 0;
 
-            if (t.drag)
-                t.drag->deleteLater();
-
 //            current_target = target;
 //            current_proxy_target = proxy_target;
 //            current_embedding_widget = embedding_widget;
@@ -1211,7 +1216,7 @@ QVariant QXcbDropData::xdndObtainData(const QByteArray &format, QVariant::Type r
         return result;
     }
 
-    QList<xcb_atom_t> atoms = drag->xdnd_types;
+    QVector<xcb_atom_t> atoms = drag->xdnd_types;
     QByteArray encoding;
     xcb_atom_t a = mimeAtomForFormat(c, QLatin1String(format), requestedType, atoms, &encoding);
     if (a == XCB_NONE)
diff --git a/src/plugins/platforms/xcb/qxcbdrag.h b/src/plugins/platforms/xcb/qxcbdrag.h
index d94c42696f..e273492837 100644
--- a/src/plugins/platforms/xcb/qxcbdrag.h
+++ b/src/plugins/platforms/xcb/qxcbdrag.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,7 +38,6 @@
 #include <private/qsimpledrag_p.h>
 #include <qxcbobject.h>
 #include <xcb/xcb.h>
-#include <qlist.h>
 #include <qpoint.h>
 #include <qrect.h>
 #include <qsharedpointer.h>
@@ -127,7 +118,7 @@ private:
 
     // the types in this drop. 100 is no good, but at least it's big.
     enum { xdnd_max_type = 100 };
-    QList<xcb_atom_t> xdnd_types;
+    QVector<xcb_atom_t> xdnd_types;
 
     // timestamp from XdndPosition and XdndDroptime for retrieving the data
     xcb_timestamp_t target_time;
@@ -160,7 +151,7 @@ private:
         QPointer<QDrag> drag;
         QTime time;
     };
-    QList<Transaction> transactions;
+    QVector<Transaction> transactions;
 
     int transaction_expiry_timer;
     void restartDropExpiryTimer();
diff --git a/src/plugins/platforms/xcb/qxcbeglsurface.h b/src/plugins/platforms/xcb/qxcbeglsurface.h
index f13c9e4e86..b03a029094 100644
--- a/src/plugins/platforms/xcb/qxcbeglsurface.h
+++ b/src/plugins/platforms/xcb/qxcbeglsurface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbimage.cpp b/src/plugins/platforms/xcb/qxcbimage.cpp
index 181d99e85b..43d135fd4f 100644
--- a/src/plugins/platforms/xcb/qxcbimage.cpp
+++ b/src/plugins/platforms/xcb/qxcbimage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,6 +60,14 @@ QImage::Format qt_xcb_imageFormatForVisual(QXcbConnection *connection, uint8_t d
         && visual->green_mask == 0xff00 && visual->blue_mask == 0xff)
         return QImage::Format_ARGB32_Premultiplied;
 
+    if (depth == 30 && format->bits_per_pixel == 32 && visual->red_mask == 0x3ff
+        && visual->green_mask == 0x0ffc00 && visual->blue_mask == 0x3ff00000)
+        return QImage::Format_BGR30;
+
+    if (depth == 30 && format->bits_per_pixel == 32 && visual->blue_mask == 0x3ff
+        && visual->green_mask == 0x0ffc00 && visual->red_mask == 0x3ff00000)
+        return QImage::Format_RGB30;
+
     if (depth == 24 && format->bits_per_pixel == 32 && visual->red_mask == 0xff0000
         && visual->green_mask == 0xff00 && visual->blue_mask == 0xff)
         return QImage::Format_RGB32;
@@ -147,6 +147,13 @@ QPixmap qt_xcb_pixmapFromXPixmap(QXcbConnection *connection, xcb_pixmap_t pixmap
                     p[x] |= 0xff000000;
                 p += bytes_per_line / 4;
             }
+        } else if (format == QImage::Format_BGR30 || format == QImage::Format_RGB30) {
+            QRgb *p = (QRgb *)image.bits();
+            for (int y = 0; y < height; ++y) {
+                for (int x = 0; x < width; ++x)
+                    p[x] |= 0xc0000000;
+                p += bytes_per_line / 4;
+            }
         }
 
         result = QPixmap::fromImage(image.copy());
diff --git a/src/plugins/platforms/xcb/qxcbimage.h b/src/plugins/platforms/xcb/qxcbimage.h
index c5606f6e61..fe1368254b 100644
--- a/src/plugins/platforms/xcb/qxcbimage.h
+++ b/src/plugins/platforms/xcb/qxcbimage.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbintegration.cpp b/src/plugins/platforms/xcb/qxcbintegration.cpp
index 1b1c20f02c..d3533b8e44 100644
--- a/src/plugins/platforms/xcb/qxcbintegration.cpp
+++ b/src/plugins/platforms/xcb/qxcbintegration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -83,6 +75,7 @@
 #include "qxcbeglsurface.h"
 #include <QtPlatformSupport/private/qeglplatformcontext_p.h>
 #include <QtPlatformSupport/private/qeglpbuffer_p.h>
+#include <QtPlatformHeaders/QEGLNativeContext>
 #endif
 
 #include <QtGui/QOpenGLContext>
@@ -187,8 +180,8 @@ class QEGLXcbPlatformContext : public QEGLPlatformContext
 {
 public:
     QEGLXcbPlatformContext(const QSurfaceFormat &glFormat, QPlatformOpenGLContext *share,
-                           EGLDisplay display, QXcbConnection *c)
-        : QEGLPlatformContext(glFormat, share, display)
+                           EGLDisplay display, QXcbConnection *c, const QVariant &nativeHandle)
+        : QEGLPlatformContext(glFormat, share, display, 0, nativeHandle)
         , m_connection(c)
     {
         Q_XCB_NOOP(m_connection);
@@ -224,6 +217,10 @@ public:
             return static_cast<QEGLPbuffer *>(surface)->pbuffer();
     }
 
+    QVariant nativeHandle() const {
+        return QVariant::fromValue<QEGLNativeContext>(QEGLNativeContext(eglContext(), eglDisplay()));
+    }
+
 private:
     QXcbConnection *m_connection;
 };
@@ -234,10 +231,18 @@ QPlatformOpenGLContext *QXcbIntegration::createPlatformOpenGLContext(QOpenGLCont
 {
     QXcbScreen *screen = static_cast<QXcbScreen *>(context->screen()->handle());
 #if defined(XCB_USE_GLX)
-    return new QGLXContext(screen, context->format(), context->shareHandle());
+    QGLXContext *platformContext = new QGLXContext(screen, context->format(),
+                                                   context->shareHandle(), context->nativeHandle());
+    context->setNativeHandle(platformContext->nativeHandle());
+    return platformContext;
 #elif defined(XCB_USE_EGL)
-    return new QEGLXcbPlatformContext(context->format(), context->shareHandle(),
-        screen->connection()->egl_display(), screen->connection());
+    QEGLXcbPlatformContext *platformContext = new QEGLXcbPlatformContext(context->format(),
+                                                                         context->shareHandle(),
+                                                                         screen->connection()->egl_display(),
+                                                                         screen->connection(),
+                                                                         context->nativeHandle());
+    context->setNativeHandle(platformContext->nativeHandle());
+    return platformContext;
 #else
     Q_UNUSED(screen);
     qWarning("QXcbIntegration: Cannot create platform OpenGL context, neither GLX nor EGL are enabled");
diff --git a/src/plugins/platforms/xcb/qxcbintegration.h b/src/plugins/platforms/xcb/qxcbintegration.h
index 6ae23125c8..ffb068ecb3 100644
--- a/src/plugins/platforms/xcb/qxcbintegration.h
+++ b/src/plugins/platforms/xcb/qxcbintegration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbkeyboard.cpp b/src/plugins/platforms/xcb/qxcbkeyboard.cpp
index a873ba97d7..7e70e7258d 100644
--- a/src/plugins/platforms/xcb/qxcbkeyboard.cpp
+++ b/src/plugins/platforms/xcb/qxcbkeyboard.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -198,8 +190,10 @@
 #define XF86XK_MenuKB              0x1008FF65
 #define XF86XK_MenuPB              0x1008FF66
 #define XF86XK_MySites             0x1008FF67
+#define XF86XK_New                 0x1008FF68
 #define XF86XK_News                0x1008FF69
 #define XF86XK_OfficeHome          0x1008FF6A
+#define XF86XK_Open                0x1008FF6B
 #define XF86XK_Option              0x1008FF6C
 #define XF86XK_Paste               0x1008FF6D
 #define XF86XK_Phone               0x1008FF6E
@@ -497,8 +491,10 @@ static const unsigned int KeyTbl[] = {
     XF86XK_MenuKB,              Qt::Key_MenuKB,
     XF86XK_MenuPB,              Qt::Key_MenuPB,
     XF86XK_MySites,             Qt::Key_MySites,
+    XF86XK_New,                 Qt::Key_New,
     XF86XK_News,                Qt::Key_News,
     XF86XK_OfficeHome,          Qt::Key_OfficeHome,
+    XF86XK_Open,                Qt::Key_Open,
     XF86XK_Option,              Qt::Key_Option,
     XF86XK_Paste,               Qt::Key_Paste,
     XF86XK_Phone,               Qt::Key_Phone,
diff --git a/src/plugins/platforms/xcb/qxcbkeyboard.h b/src/plugins/platforms/xcb/qxcbkeyboard.h
index e816d3c003..e71165d824 100644
--- a/src/plugins/platforms/xcb/qxcbkeyboard.h
+++ b/src/plugins/platforms/xcb/qxcbkeyboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbmain.cpp b/src/plugins/platforms/xcb/qxcbmain.cpp
index 54c1629bf0..80de5ba6f1 100644
--- a/src/plugins/platforms/xcb/qxcbmain.cpp
+++ b/src/plugins/platforms/xcb/qxcbmain.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbmime.cpp b/src/plugins/platforms/xcb/qxcbmime.cpp
index b205a63267..740b3eecab 100644
--- a/src/plugins/platforms/xcb/qxcbmime.cpp
+++ b/src/plugins/platforms/xcb/qxcbmime.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -136,9 +128,10 @@ bool QXcbMime::mimeDataForAtom(QXcbConnection *connection, xcb_atom_t a, QMimeDa
     return ret;
 }
 
-QList<xcb_atom_t> QXcbMime::mimeAtomsForFormat(QXcbConnection *connection, const QString &format)
+QVector<xcb_atom_t> QXcbMime::mimeAtomsForFormat(QXcbConnection *connection, const QString &format)
 {
-    QList<xcb_atom_t> atoms;
+    QVector<xcb_atom_t> atoms;
+    atoms.reserve(7);
     atoms.append(connection->internAtom(format.toLatin1()));
 
     // special cases for strings
@@ -240,7 +233,7 @@ QVariant QXcbMime::mimeConvertToFormat(QXcbConnection *connection, xcb_atom_t a,
 }
 
 xcb_atom_t QXcbMime::mimeAtomForFormat(QXcbConnection *connection, const QString &format, QVariant::Type requestedType,
-                                 const QList<xcb_atom_t> &atoms, QByteArray *requestedEncoding)
+                                 const QVector<xcb_atom_t> &atoms, QByteArray *requestedEncoding)
 {
     requestedEncoding->clear();
 
diff --git a/src/plugins/platforms/xcb/qxcbmime.h b/src/plugins/platforms/xcb/qxcbmime.h
index 4a69a35ced..0fcf06b78f 100644
--- a/src/plugins/platforms/xcb/qxcbmime.h
+++ b/src/plugins/platforms/xcb/qxcbmime.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,14 +51,14 @@ public:
     QXcbMime();
     ~QXcbMime();
 
-    static QList<xcb_atom_t> mimeAtomsForFormat(QXcbConnection *connection, const QString &format);
+    static QVector<xcb_atom_t> mimeAtomsForFormat(QXcbConnection *connection, const QString &format);
     static QString mimeAtomToString(QXcbConnection *connection, xcb_atom_t a);
     static bool mimeDataForAtom(QXcbConnection *connection, xcb_atom_t a, QMimeData *mimeData, QByteArray *data,
                                 xcb_atom_t *atomFormat, int *dataFormat);
     static QVariant mimeConvertToFormat(QXcbConnection *connection, xcb_atom_t a, const QByteArray &data, const QString &format,
                                         QVariant::Type requestedType, const QByteArray &encoding);
     static xcb_atom_t mimeAtomForFormat(QXcbConnection *connection, const QString &format, QVariant::Type requestedType,
-                                        const QList<xcb_atom_t> &atoms, QByteArray *requestedEncoding);
+                                        const QVector<xcb_atom_t> &atoms, QByteArray *requestedEncoding);
 };
 
 #endif // !(defined(QT_NO_DRAGANDDROP) && defined(QT_NO_CLIPBOARD))
diff --git a/src/plugins/platforms/xcb/qxcbnativeinterface.cpp b/src/plugins/platforms/xcb/qxcbnativeinterface.cpp
index b45bd6a82e..0d75a7f032 100644
--- a/src/plugins/platforms/xcb/qxcbnativeinterface.cpp
+++ b/src/plugins/platforms/xcb/qxcbnativeinterface.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,6 +52,8 @@
 #include "qglxintegration.h"
 #endif
 
+#include <QtPlatformHeaders/qxcbwindowfunctions.h>
+
 #ifdef XCB_USE_XLIB
 #  include <X11/Xlib.h>
 #else
@@ -77,11 +71,14 @@ static int resourceType(const QByteArray &key)
         QByteArrayLiteral("display"),  QByteArrayLiteral("egldisplay"),
         QByteArrayLiteral("connection"), QByteArrayLiteral("screen"),
         QByteArrayLiteral("eglcontext"),
+        QByteArrayLiteral("eglconfig"),
+        QByteArrayLiteral("glxconfig"),
         QByteArrayLiteral("glxcontext"), QByteArrayLiteral("apptime"),
         QByteArrayLiteral("appusertime"), QByteArrayLiteral("hintstyle"),
         QByteArrayLiteral("startupid"), QByteArrayLiteral("traywindow"),
         QByteArrayLiteral("gettimestamp"), QByteArrayLiteral("x11screen"),
-        QByteArrayLiteral("rootwindow")
+        QByteArrayLiteral("rootwindow"),
+        QByteArrayLiteral("subpixeltype"), QByteArrayLiteral("antialiasingEnabled")
     };
     const QByteArray *end = names + sizeof(names) / sizeof(names[0]);
     const QByteArray *result = std::find(names, end, key);
@@ -91,7 +88,9 @@ static int resourceType(const QByteArray &key)
 }
 
 QXcbNativeInterface::QXcbNativeInterface() :
-    m_genericEventFilterType(QByteArrayLiteral("xcb_generic_event_t"))
+    m_genericEventFilterType(QByteArrayLiteral("xcb_generic_event_t")),
+    m_sysTraySelectionAtom(XCB_ATOM_NONE),
+    m_systrayVisualId(XCB_NONE)
 
 {
 }
@@ -133,6 +132,82 @@ QRect QXcbNativeInterface::systemTrayWindowGlobalGeometry(const QWindow *window)
     return QRect();
 }
 
+xcb_window_t QXcbNativeInterface::locateSystemTray(xcb_connection_t *conn, const QXcbScreen *screen)
+{
+    if (m_sysTraySelectionAtom == XCB_ATOM_NONE) {
+        const QByteArray net_sys_tray = QString::fromLatin1("_NET_SYSTEM_TRAY_S%1").arg(screen->screenNumber()).toLatin1();
+        xcb_intern_atom_cookie_t intern_c =
+            xcb_intern_atom_unchecked(conn, true, net_sys_tray.length(), net_sys_tray);
+
+        xcb_intern_atom_reply_t *intern_r = xcb_intern_atom_reply(conn, intern_c, 0);
+
+        if (!intern_r)
+            return XCB_WINDOW_NONE;
+
+        m_sysTraySelectionAtom = intern_r->atom;
+        free(intern_r);
+    }
+
+    xcb_get_selection_owner_cookie_t sel_owner_c = xcb_get_selection_owner_unchecked(conn, m_sysTraySelectionAtom);
+    xcb_get_selection_owner_reply_t *sel_owner_r = xcb_get_selection_owner_reply(conn, sel_owner_c, 0);
+
+    if (!sel_owner_r)
+        return XCB_WINDOW_NONE;
+
+    xcb_window_t selection_window = sel_owner_r->owner;
+    free(sel_owner_r);
+
+    return selection_window;
+}
+
+bool QXcbNativeInterface::systrayVisualHasAlphaChannel() {
+    const QXcbScreen *screen = static_cast<QXcbScreen *>(QGuiApplication::primaryScreen()->handle());
+
+    if (m_systrayVisualId == XCB_NONE) {
+        xcb_connection_t *xcb_conn = screen->xcb_connection();
+        xcb_atom_t tray_atom = screen->atom(QXcbAtom::_NET_SYSTEM_TRAY_VISUAL);
+
+        xcb_window_t systray_window = locateSystemTray(xcb_conn, screen);
+        if (systray_window == XCB_WINDOW_NONE)
+            return false;
+
+        // Get the xcb property for the _NET_SYSTEM_TRAY_VISUAL atom
+        xcb_get_property_cookie_t systray_atom_cookie;
+        xcb_get_property_reply_t *systray_atom_reply;
+
+        systray_atom_cookie = xcb_get_property_unchecked(xcb_conn, false, systray_window,
+                                                        tray_atom, XCB_ATOM_VISUALID, 0, 1);
+        systray_atom_reply = xcb_get_property_reply(xcb_conn, systray_atom_cookie, 0);
+
+        if (!systray_atom_reply)
+            return false;
+
+        if (systray_atom_reply->value_len > 0 && xcb_get_property_value_length(systray_atom_reply) > 0) {
+            xcb_visualid_t * vids = (uint32_t *)xcb_get_property_value(systray_atom_reply);
+            m_systrayVisualId = vids[0];
+        }
+
+        free(systray_atom_reply);
+    }
+
+    if (m_systrayVisualId != XCB_NONE) {
+        quint8 depth = screen->depthOfVisual(m_systrayVisualId);
+        return depth == 32;
+    } else {
+        return false;
+    }
+}
+
+void QXcbNativeInterface::clearRegion(const QWindow *qwindow, const QRect& rect)
+{
+    if (const QPlatformWindow *platformWindow = qwindow->handle()) {
+        const QXcbWindow *qxwindow = static_cast<const QXcbWindow *>(platformWindow);
+        xcb_connection_t *xcb_conn = qxwindow->xcb_connection();
+
+        xcb_clear_area(xcb_conn, false, qxwindow->xcb_window(), rect.x(), rect.y(), rect.width(), rect.height());
+    }
+}
+
 void *QXcbNativeInterface::nativeResourceForIntegration(const QByteArray &resourceString)
 {
     void *result = 0;
@@ -160,6 +235,12 @@ void *QXcbNativeInterface::nativeResourceForContext(const QByteArray &resourceSt
     case EglContext:
         result = eglContextForContext(context);
         break;
+    case EglConfig:
+        result = eglConfigForContext(context);
+        break;
+    case GLXConfig:
+        result = glxConfigForContext(context);
+        break;
     case GLXContext:
         result = glxContextForContext(context);
         break;
@@ -189,6 +270,12 @@ void *QXcbNativeInterface::nativeResourceForScreen(const QByteArray &resource, Q
     case ScreenHintStyle:
         result = reinterpret_cast<void *>(xcbScreen->hintStyle() + 1);
         break;
+    case ScreenSubpixelType:
+        result = reinterpret_cast<void *>(xcbScreen->subpixelType() + 1);
+        break;
+    case ScreenAntialiasingEnabled:
+        result = reinterpret_cast<void *>(xcbScreen->antialiasingEnabled() + 1);
+        break;
     case TrayWindow:
         if (QXcbSystemTrayTracker *s = systemTrayTracker(screen))
             result = (void *)quintptr(s->trayWindow());
@@ -225,6 +312,14 @@ void *QXcbNativeInterface::nativeResourceForWindow(const QByteArray &resourceStr
     return result;
 }
 
+QPlatformNativeInterface::NativeResourceForIntegrationFunction QXcbNativeInterface::nativeResourceFunctionForIntegration(const QByteArray &resource)
+{
+    QByteArray lowerCaseResource = resource.toLower();
+    if (lowerCaseResource == "setstartupid")
+        return NativeResourceForIntegrationFunction(setStartupId);
+    return 0;
+}
+
 QPlatformNativeInterface::NativeResourceForScreenFunction QXcbNativeInterface::nativeResourceFunctionForScreen(const QByteArray &resource)
 {
     const QByteArray lowerCaseResource = resource.toLower();
@@ -235,6 +330,14 @@ QPlatformNativeInterface::NativeResourceForScreenFunction QXcbNativeInterface::n
     return 0;
 }
 
+QFunctionPointer QXcbNativeInterface::platformFunction(const QByteArray &function) const
+{
+    if (function == QXcbWindowFunctions::setWmWindowTypeIdentifier()) {
+        return QFunctionPointer(QXcbWindow::setWmWindowTypeStatic);
+    }
+    return Q_NULLPTR;
+}
+
 void *QXcbNativeInterface::appTime(const QXcbScreen *screen)
 {
     return reinterpret_cast<void *>(quintptr(screen->connection()->time()));
@@ -287,6 +390,15 @@ void QXcbNativeInterface::setAppUserTime(QScreen* screen, xcb_timestamp_t time)
     static_cast<QXcbScreen *>(screen->handle())->connection()->setNetWmUserTime(time);
 }
 
+void QXcbNativeInterface::setStartupId(const char *data)
+{
+    QByteArray startupId(data);
+    QXcbIntegration *integration = static_cast<QXcbIntegration *>(QGuiApplicationPrivate::platformIntegration());
+    QXcbConnection *defaultConnection = integration->defaultConnection();
+    if (defaultConnection)
+        defaultConnection->setStartupId(startupId);
+}
+
 QPlatformNativeInterface::NativeResourceForContextFunction QXcbNativeInterface::nativeResourceFunctionForContext(const QByteArray &resource)
 {
     QByteArray lowerCaseResource = resource.toLower();
@@ -353,6 +465,18 @@ void * QXcbNativeInterface::eglContextForContext(QOpenGLContext *context)
 #endif
 }
 
+void * QXcbNativeInterface::eglConfigForContext(QOpenGLContext *context)
+{
+    Q_ASSERT(context);
+#if defined(XCB_USE_EGL)
+    QEGLPlatformContext *eglPlatformContext = static_cast<QEGLPlatformContext *>(context->handle());
+    return eglPlatformContext->eglConfig();
+#else
+    Q_UNUSED(context);
+    return 0;
+#endif
+}
+
 void *QXcbNativeInterface::glxContextForContext(QOpenGLContext *context)
 {
     Q_ASSERT(context);
@@ -366,4 +490,17 @@ void *QXcbNativeInterface::glxContextForContext(QOpenGLContext *context)
 
 }
 
+void *QXcbNativeInterface::glxConfigForContext(QOpenGLContext *context)
+{
+    Q_ASSERT(context);
+#if defined(XCB_USE_GLX)
+    QGLXContext *glxPlatformContext = static_cast<QGLXContext *>(context->handle());
+    return glxPlatformContext->glxConfig();
+#else
+    Q_UNUSED(context);
+    return 0;
+#endif
+
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/xcb/qxcbnativeinterface.h b/src/plugins/platforms/xcb/qxcbnativeinterface.h
index fb1a46014c..b667f1a372 100644
--- a/src/plugins/platforms/xcb/qxcbnativeinterface.h
+++ b/src/plugins/platforms/xcb/qxcbnativeinterface.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,6 +55,8 @@ public:
         Connection,
         Screen,
         EglContext,
+        EglConfig,
+        GLXConfig,
         GLXContext,
         AppTime,
         AppUserTime,
@@ -71,19 +65,24 @@ public:
         TrayWindow,
         GetTimestamp,
         X11Screen,
-        RootWindow
+        RootWindow,
+        ScreenSubpixelType,
+        ScreenAntialiasingEnabled
     };
 
     QXcbNativeInterface();
 
     void *nativeResourceForIntegration(const QByteArray &resource) Q_DECL_OVERRIDE;
-    void *nativeResourceForContext(const QByteArray &resourceString, QOpenGLContext *context);
-    void *nativeResourceForScreen(const QByteArray &resource, QScreen *screen);
-    void *nativeResourceForWindow(const QByteArray &resourceString, QWindow *window);
+    void *nativeResourceForContext(const QByteArray &resourceString, QOpenGLContext *context) Q_DECL_OVERRIDE;
+    void *nativeResourceForScreen(const QByteArray &resource, QScreen *screen) Q_DECL_OVERRIDE;
+    void *nativeResourceForWindow(const QByteArray &resourceString, QWindow *window) Q_DECL_OVERRIDE;
 
-    NativeResourceForContextFunction nativeResourceFunctionForContext(const QByteArray &resource);
+    NativeResourceForIntegrationFunction nativeResourceFunctionForIntegration(const QByteArray &resource) Q_DECL_OVERRIDE;
+    NativeResourceForContextFunction nativeResourceFunctionForContext(const QByteArray &resource) Q_DECL_OVERRIDE;
     NativeResourceForScreenFunction nativeResourceFunctionForScreen(const QByteArray &resource) Q_DECL_OVERRIDE;
 
+    QFunctionPointer platformFunction(const QByteArray &function) const Q_DECL_OVERRIDE;
+
     inline const QByteArray &genericEventFilterType() const { return m_genericEventFilterType; }
 
     void *displayForWindow(QWindow *window);
@@ -96,13 +95,18 @@ public:
     void *startupId();
     void *x11Screen();
     void *rootWindow();
+    static void setStartupId(const char *);
     static void setAppTime(QScreen *screen, xcb_timestamp_t time);
     static void setAppUserTime(QScreen *screen, xcb_timestamp_t time);
     static void *eglContextForContext(QOpenGLContext *context);
+    static void *eglConfigForContext(QOpenGLContext *context);
     static void *glxContextForContext(QOpenGLContext *context);
+    static void *glxConfigForContext(QOpenGLContext *context);
 
     Q_INVOKABLE void beep();
     Q_INVOKABLE bool systemTrayAvailable(const QScreen *screen) const;
+    Q_INVOKABLE void clearRegion(const QWindow *qwindow, const QRect& rect);
+    Q_INVOKABLE bool systrayVisualHasAlphaChannel();
     Q_INVOKABLE bool requestSystemTrayWindowDock(const QWindow *window);
     Q_INVOKABLE QRect systemTrayWindowGlobalGeometry(const QWindow *window);
 
@@ -110,8 +114,13 @@ signals:
     void systemTrayWindowChanged(QScreen *screen);
 
 private:
+    xcb_window_t locateSystemTray(xcb_connection_t *conn, const QXcbScreen *screen);
+
     const QByteArray m_genericEventFilterType;
 
+    xcb_atom_t m_sysTraySelectionAtom;
+    xcb_visualid_t m_systrayVisualId;
+
     static QXcbScreen *qPlatformScreenForWindow(QWindow *window);
 };
 
diff --git a/src/plugins/platforms/xcb/qxcbobject.h b/src/plugins/platforms/xcb/qxcbobject.h
index 354984cb21..1b1226214e 100644
--- a/src/plugins/platforms/xcb/qxcbobject.h
+++ b/src/plugins/platforms/xcb/qxcbobject.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbscreen.cpp b/src/plugins/platforms/xcb/qxcbscreen.cpp
index 01e78465b6..8bdedba8ac 100644
--- a/src/plugins/platforms/xcb/qxcbscreen.cpp
+++ b/src/plugins/platforms/xcb/qxcbscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,7 +60,10 @@ QXcbScreen::QXcbScreen(QXcbConnection *connection, xcb_screen_t *scr,
     , m_number(number)
     , m_refreshRate(60)
     , m_forcedDpi(-1)
+    , m_devicePixelRatio(1)
     , m_hintStyle(QFontEngine::HintStyle(-1))
+    , m_subpixelType(QFontEngine::SubpixelAntialiasingType(-1))
+    , m_antialiasingEnabled(-1)
     , m_xSettings(0)
 {
     if (connection->hasXRandr())
@@ -76,19 +71,18 @@ QXcbScreen::QXcbScreen(QXcbConnection *connection, xcb_screen_t *scr,
 
     updateGeometry(output ? output->timestamp : 0);
     updateRefreshRate();
-
+    const int dpr = int(devicePixelRatio());
     // On VNC, it can be that physical size is unknown while
     // virtual size is known (probably back-calculated from DPI and resolution)
     if (m_sizeMillimeters.isEmpty())
         m_sizeMillimeters = m_virtualSizeMillimeters;
     if (m_geometry.isEmpty())
-        m_geometry = QRect(QPoint(), m_virtualSize);
+        m_geometry = QRect(QPoint(), m_virtualSize/dpr);
     if (m_availableGeometry.isEmpty())
-        m_availableGeometry = QRect(QPoint(), m_virtualSize);
+        m_availableGeometry = m_geometry;
 
     readXResources();
 
-
 #ifdef Q_XCB_DEBUG
     qDebug();
     qDebug("Screen output %s of xcb screen %d:", m_outputName.toUtf8().constData(), m_number);
@@ -99,6 +93,7 @@ QXcbScreen::QXcbScreen(QXcbConnection *connection, xcb_screen_t *scr,
     qDebug("  virtual height.: %lf", m_virtualSizeMillimeters.height());
     qDebug("  virtual geom...: %d x %d", m_virtualSize.width(), m_virtualSize.height());
     qDebug("  avail virt geom: %d x %d +%d +%d", m_availableGeometry.width(), m_availableGeometry.height(), m_availableGeometry.x(), m_availableGeometry.y());
+    qDebug("  pixel ratio....: %d", m_devicePixelRatio);
     qDebug("  depth..........: %d", screen()->root_depth);
     qDebug("  white pixel....: %x", screen()->white_pixel);
     qDebug("  black pixel....: %x", screen()->black_pixel);
@@ -200,6 +195,7 @@ QXcbScreen::QXcbScreen(QXcbConnection *connection, xcb_screen_t *scr,
         while (visualtype_iterator.rem) {
             xcb_visualtype_t *visualtype = visualtype_iterator.data;
             m_visuals.insert(visualtype->visual_id, *visualtype);
+            m_visualDepths.insert(visualtype->visual_id, depth->depth);
             xcb_visualtype_next(&visualtype_iterator);
         }
 
@@ -219,8 +215,9 @@ QWindow *QXcbScreen::topLevelAt(const QPoint &p) const
 {
     xcb_window_t root = m_screen->root;
 
-    int x = p.x();
-    int y = p.y();
+    int dpr = int(devicePixelRatio());
+    int x = p.x() / dpr;
+    int y = p.y() / dpr;
 
     xcb_window_t parent = root;
     xcb_window_t child = root;
@@ -296,6 +293,14 @@ const xcb_visualtype_t *QXcbScreen::visualForId(xcb_visualid_t visualid) const
     return &*it;
 }
 
+quint8 QXcbScreen::depthOfVisual(xcb_visualid_t visualid) const
+{
+    QMap<xcb_visualid_t, quint8>::const_iterator it = m_visualDepths.find(visualid);
+    if (it == m_visualDepths.constEnd())
+        return 0;
+    return *it;
+}
+
 QImage::Format QXcbScreen::format() const
 {
     return QImage::Format_RGB32;
@@ -303,11 +308,25 @@ QImage::Format QXcbScreen::format() const
 
 QDpi QXcbScreen::logicalDpi() const
 {
+    int dpr = int(devicePixelRatio());
+
     if (m_forcedDpi > 0)
-        return QDpi(m_forcedDpi, m_forcedDpi);
+        return QDpi(m_forcedDpi/dpr, m_forcedDpi/dpr);
 
-    return QDpi(Q_MM_PER_INCH * m_virtualSize.width() / m_virtualSizeMillimeters.width(),
-                Q_MM_PER_INCH * m_virtualSize.height() / m_virtualSizeMillimeters.height());
+    return QDpi(Q_MM_PER_INCH * m_virtualSize.width() / m_virtualSizeMillimeters.width() / dpr,
+                Q_MM_PER_INCH * m_virtualSize.height() / m_virtualSizeMillimeters.height() / dpr);
+}
+
+
+qreal QXcbScreen::devicePixelRatio() const
+{
+    static int override_dpr = qgetenv("QT_DEVICE_PIXEL_RATIO").toInt();
+    static bool auto_dpr = qgetenv("QT_DEVICE_PIXEL_RATIO").toLower() == "auto";
+    if (override_dpr > 0)
+        return override_dpr;
+    if (auto_dpr)
+        return m_devicePixelRatio;
+    return 1.0;
 }
 
 QPlatformCursor *QXcbScreen::cursor() const
@@ -376,7 +395,7 @@ void QXcbScreen::handleScreenChange(xcb_randr_screen_change_notify_event_t *chan
     case XCB_RANDR_ROTATION_REFLECT_Y: break;
     }
 
-    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry());
+    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), geometry(), availableGeometry());
     QWindowSystemInterface::handleScreenOrientationChange(QPlatformScreen::screen(), m_orientation);
 
     QDpi ldpi = logicalDpi();
@@ -385,12 +404,15 @@ void QXcbScreen::handleScreenChange(xcb_randr_screen_change_notify_event_t *chan
 
 void QXcbScreen::updateGeometry(xcb_timestamp_t timestamp)
 {
+    QRect xGeometry;
+    QRect xAvailableGeometry;
+
     if (connection()->hasXRandr()) {
         xcb_randr_get_crtc_info_reply_t *crtc = xcb_randr_get_crtc_info_reply(xcb_connection(),
             xcb_randr_get_crtc_info_unchecked(xcb_connection(), m_crtc, timestamp), NULL);
         if (crtc) {
-            m_geometry = QRect(crtc->x, crtc->y, crtc->width, crtc->height);
-            m_availableGeometry = m_geometry;
+            xGeometry = QRect(crtc->x, crtc->y, crtc->width, crtc->height);
+            xAvailableGeometry = xGeometry;
             free(crtc);
         }
     }
@@ -411,11 +433,17 @@ void QXcbScreen::updateGeometry(xcb_timestamp_t timestamp)
         QRect virtualAvailableGeometry(geom[0], geom[1], geom[2], geom[3]);
         // Take the intersection of the desktop's available geometry with this screen's geometry
         // to get the part of the available geometry which belongs to this screen.
-        m_availableGeometry = m_geometry & virtualAvailableGeometry;
+        xAvailableGeometry = xGeometry & virtualAvailableGeometry;
     }
     free(workArea);
 
-    QWindowSystemInterface::handleScreenAvailableGeometryChange(QPlatformScreen::screen(), m_availableGeometry);
+    qreal dpi = xGeometry.width() / physicalSize().width() * qreal(25.4);
+    m_devicePixelRatio = qRound(dpi/96);
+    const int dpr = int(devicePixelRatio()); // we may override m_devicePixelRatio
+    m_geometry = QRect(xGeometry.topLeft()/dpr, xGeometry.size()/dpr);
+    m_availableGeometry = QRect(xAvailableGeometry.topLeft()/dpr, xAvailableGeometry.size()/dpr);
+
+    QWindowSystemInterface::handleScreenGeometryChange(QPlatformScreen::screen(), m_geometry, m_availableGeometry);
 }
 
 void QXcbScreen::updateRefreshRate()
@@ -538,32 +566,52 @@ QPixmap QXcbScreen::grabWindow(WId window, int x, int y, int width, int height)
     return result;
 }
 
+static bool parseXftInt(const QByteArray& stringValue, int *value)
+{
+    Q_ASSERT(value != 0);
+    bool ok;
+    *value = stringValue.toInt(&ok);
+    return ok;
+}
+
+static QFontEngine::HintStyle parseXftHintStyle(const QByteArray& stringValue)
+{
+    if (stringValue == "hintfull")
+        return QFontEngine::HintFull;
+    else if (stringValue == "hintnone")
+        return QFontEngine::HintNone;
+    else if (stringValue == "hintmedium")
+        return QFontEngine::HintMedium;
+    else if (stringValue == "hintslight")
+        return QFontEngine::HintLight;
+
+    return QFontEngine::HintStyle(-1);
+}
+
+static QFontEngine::SubpixelAntialiasingType parseXftRgba(const QByteArray& stringValue)
+{
+    if (stringValue == "none")
+        return QFontEngine::Subpixel_None;
+    else if (stringValue == "rgb")
+        return QFontEngine::Subpixel_RGB;
+    else if (stringValue == "bgr")
+        return QFontEngine::Subpixel_BGR;
+    else if (stringValue == "vrgb")
+        return QFontEngine::Subpixel_VRGB;
+    else if (stringValue == "vbgr")
+        return QFontEngine::Subpixel_VBGR;
+
+    return QFontEngine::SubpixelAntialiasingType(-1);
+}
+
 bool QXcbScreen::xResource(const QByteArray &identifier,
                            const QByteArray &expectedIdentifier,
-                           int *value)
+                           QByteArray& stringValue)
 {
-    Q_ASSERT(value != 0);
     if (identifier.startsWith(expectedIdentifier)) {
-        QByteArray stringValue = identifier.mid(expectedIdentifier.size());
-
-        bool ok;
-        *value = stringValue.toInt(&ok);
-        if (!ok) {
-            if (stringValue == "hintfull")
-                *value = QFontEngine::HintFull;
-            else if (stringValue == "hintnone")
-                *value = QFontEngine::HintNone;
-            else if (stringValue == "hintmedium")
-                *value = QFontEngine::HintMedium;
-            else if (stringValue == "hintslight")
-                *value = QFontEngine::HintLight;
-
-            return *value != 0;
-        }
-
+        stringValue = identifier.mid(expectedIdentifier.size());
         return true;
     }
-
     return false;
 }
 
@@ -595,10 +643,18 @@ void QXcbScreen::readXResources()
     for (int i = 0; i < split.size(); ++i) {
         const QByteArray &r = split.at(i);
         int value;
-        if (xResource(r, "Xft.dpi:\t", &value))
-            m_forcedDpi = value;
-        else if (xResource(r, "Xft.hintstyle:\t", &value))
-            m_hintStyle = QFontEngine::HintStyle(value);
+        QByteArray stringValue;
+        if (xResource(r, "Xft.dpi:\t", stringValue)) {
+            if (parseXftInt(stringValue, &value))
+                m_forcedDpi = value;
+        } else if (xResource(r, "Xft.hintstyle:\t", stringValue)) {
+            m_hintStyle = parseXftHintStyle(stringValue);
+        } else if (xResource(r, "Xft.antialias:\t", stringValue)) {
+            if (parseXftInt(stringValue, &value))
+                m_antialiasingEnabled = value;
+        } else if (xResource(r, "Xft.rgba:\t", stringValue)) {
+            m_subpixelType = parseXftRgba(stringValue);
+        }
     }
 }
 
diff --git a/src/plugins/platforms/xcb/qxcbscreen.h b/src/plugins/platforms/xcb/qxcbscreen.h
index c36492db64..ca0aee2cc4 100644
--- a/src/plugins/platforms/xcb/qxcbscreen.h
+++ b/src/plugins/platforms/xcb/qxcbscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -75,6 +67,7 @@ public:
     QImage::Format format() const;
     QSizeF physicalSize() const { return m_sizeMillimeters; }
     QDpi logicalDpi() const;
+    qreal devicePixelRatio() const;
     QPlatformCursor *cursor() const;
     qreal refreshRate() const { return m_refreshRate; }
     Qt::ScreenOrientation orientation() const { return m_orientation; }
@@ -93,6 +86,7 @@ public:
     bool syncRequestSupported() const { return m_syncRequestSupported; }
 
     const xcb_visualtype_t *visualForId(xcb_visualid_t) const;
+    quint8 depthOfVisual(xcb_visualid_t) const;
 
     QString name() const { return m_outputName; }
 
@@ -103,13 +97,15 @@ public:
     void readXResources();
 
     QFontEngine::HintStyle hintStyle() const { return m_hintStyle; }
+    QFontEngine::SubpixelAntialiasingType subpixelType() const { return m_subpixelType; }
+    int antialiasingEnabled() const { return m_antialiasingEnabled; }
 
     QXcbXSettings *xSettings() const;
 
 private:
     static bool xResource(const QByteArray &identifier,
-                         const QByteArray &expectedIdentifier,
-                         int *value);
+                          const QByteArray &expectedIdentifier,
+                          QByteArray &stringValue);
     void sendStartupMessage(const QByteArray &message) const;
 
     xcb_screen_t *m_screen;
@@ -127,10 +123,14 @@ private:
     bool m_syncRequestSupported;
     xcb_window_t m_clientLeader;
     QMap<xcb_visualid_t, xcb_visualtype_t> m_visuals;
+    QMap<xcb_visualid_t, quint8> m_visualDepths;
     QXcbCursor *m_cursor;
     int m_refreshRate;
     int m_forcedDpi;
+    int m_devicePixelRatio;
     QFontEngine::HintStyle m_hintStyle;
+    QFontEngine::SubpixelAntialiasingType m_subpixelType;
+    int m_antialiasingEnabled;
     QXcbXSettings *m_xSettings;
 };
 
diff --git a/src/plugins/platforms/xcb/qxcbsessionmanager.cpp b/src/plugins/platforms/xcb/qxcbsessionmanager.cpp
index 0098f47e33..fd6b3e2e3b 100644
--- a/src/plugins/platforms/xcb/qxcbsessionmanager.cpp
+++ b/src/plugins/platforms/xcb/qxcbsessionmanager.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Teo Mrnjavac <teo@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbsessionmanager.h b/src/plugins/platforms/xcb/qxcbsessionmanager.h
index 3c7c968890..b3530d0137 100644
--- a/src/plugins/platforms/xcb/qxcbsessionmanager.h
+++ b/src/plugins/platforms/xcb/qxcbsessionmanager.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
 ** Copyright (C) 2013 Teo Mrnjavac <teo@kde.org>
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbsystemtraytracker.cpp b/src/plugins/platforms/xcb/qxcbsystemtraytracker.cpp
index 649d450907..9ec4ea80ec 100644
--- a/src/plugins/platforms/xcb/qxcbsystemtraytracker.cpp
+++ b/src/plugins/platforms/xcb/qxcbsystemtraytracker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbsystemtraytracker.h b/src/plugins/platforms/xcb/qxcbsystemtraytracker.h
index c6b0a0659e..2e297c4ae5 100644
--- a/src/plugins/platforms/xcb/qxcbsystemtraytracker.h
+++ b/src/plugins/platforms/xcb/qxcbsystemtraytracker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbwindow.cpp b/src/plugins/platforms/xcb/qxcbwindow.cpp
index 586068d8d9..c4cf3b4416 100644
--- a/src/plugins/platforms/xcb/qxcbwindow.cpp
+++ b/src/plugins/platforms/xcb/qxcbwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -101,7 +93,7 @@
 #include <X11/Xutil.h>
 #endif
 
-#if defined(XCB_USE_XINPUT2_MAEMO) || defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
 #include <X11/extensions/XInput2.h>
 #endif
 
@@ -154,6 +146,30 @@ enum QX11EmbedMessageType {
 
 const quint32 XEMBED_VERSION = 0;
 
+static inline QRect mapToNative(const QRect &qtRect, int dpr)
+{
+    return QRect(qtRect.x() * dpr, qtRect.y() * dpr, qtRect.width() * dpr, qtRect.height() * dpr);
+}
+
+// When converting native rects to Qt rects: round top/left towards the origin and
+// bottom/right away from the origin, making sure that we cover the whole widget
+
+static inline QPoint dpr_floor(const QPoint &p, int dpr)
+{
+    return QPoint(p.x()/dpr, p.y()/dpr);
+}
+
+static inline QPoint dpr_ceil(const QPoint &p, int dpr)
+{
+    return QPoint((p.x() + dpr - 1) / dpr, (p.y() + dpr - 1) / dpr);
+}
+
+static inline QRect mapFromNative(const QRect &xRect, int dpr)
+{
+    return QRect(dpr_floor(xRect.topLeft(), dpr), dpr_ceil(xRect.bottomRight(), dpr));
+}
+
+
 // Returns \c true if we should set WM_TRANSIENT_FOR on \a w
 static inline bool isTransient(const QWindow *w)
 {
@@ -166,16 +182,36 @@ static inline bool isTransient(const QWindow *w)
            || w->type() == Qt::Popup;
 }
 
-static inline QImage::Format imageFormatForDepth(int depth)
+static inline QImage::Format imageFormatForVisual(int depth, quint32 red_mask, quint32 blue_mask)
 {
     switch (depth) {
-        case 32: return QImage::Format_ARGB32_Premultiplied;
-        case 24: return QImage::Format_RGB32;
-        case 16: return QImage::Format_RGB16;
-        default:
-                 qWarning("Unsupported screen depth: %d", depth);
-                 return QImage::Format_Invalid;
+    case 32:
+        if (blue_mask == 0xff)
+            return QImage::Format_ARGB32_Premultiplied;
+        if (red_mask == 0x3ff)
+            return QImage::Format_A2BGR30_Premultiplied;
+        if (blue_mask == 0x3ff)
+            return QImage::Format_A2RGB30_Premultiplied;
+        break;
+    case 30:
+        if (red_mask == 0x3ff)
+            return QImage::Format_BGR30;
+        if (blue_mask == 0x3ff)
+            return QImage::Format_RGB30;
+        break;
+    case 24:
+        if (blue_mask == 0xff)
+            return QImage::Format_RGB32;
+        break;
+    case 16:
+        if (blue_mask == 0x1f)
+            return QImage::Format_RGB16;
+        break;
+    default:
+        break;
     }
+    qWarning("Unsupported screen format: depth: %d, red_mask: %x, blue_mask: %x", depth, red_mask, blue_mask);
+    return QImage::Format_Invalid;
 }
 
 static inline bool positionIncludesFrame(QWindow *w)
@@ -183,6 +219,8 @@ static inline bool positionIncludesFrame(QWindow *w)
     return qt_window_private(w)->positionPolicy == QWindowPrivate::WindowFrameInclusive;
 }
 
+static const char *wm_window_type_property_id = "_q_xcb_wm_window_type";
+
 QXcbWindow::QXcbWindow(QWindow *window)
     : QPlatformWindow(window)
     , m_window(0)
@@ -201,6 +239,7 @@ QXcbWindow::QXcbWindow(QWindow *window)
 #endif
     , m_lastWindowStateEvent(-1)
     , m_syncState(NoSyncNeeded)
+    , m_pendingSyncRequest(0)
 {
     m_screen = static_cast<QXcbScreen *>(window->screen()->handle());
 
@@ -225,7 +264,9 @@ void QXcbWindow::create()
     if (type == Qt::Desktop) {
         m_window = m_screen->root();
         m_depth = m_screen->screen()->root_depth;
-        m_imageFormat = imageFormatForDepth(m_depth);
+        m_visualId = m_screen->screen()->root_visual;
+        const xcb_visualtype_t *visual = m_screen->visualForId(m_visualId);
+        m_imageFormat = imageFormatForVisual(m_depth, visual->red_mask, visual->blue_mask);
         connection()->addWindowEventListener(m_window, this);
         return;
     }
@@ -263,11 +304,12 @@ void QXcbWindow::create()
     // currently no way to implement it for frame-exclusive geometries.
     QRect rect = window()->geometry();
     QPlatformWindow::setGeometry(rect);
+    const int dpr = int(devicePixelRatio());
 
     QSize minimumSize = window()->minimumSize();
     if (rect.width() > 0 || rect.height() > 0) {
-        rect.setWidth(qBound(1, rect.width(), XCOORD_MAX));
-        rect.setHeight(qBound(1, rect.height(), XCOORD_MAX));
+        rect.setWidth(qBound(1, rect.width(), XCOORD_MAX/dpr));
+        rect.setHeight(qBound(1, rect.height(), XCOORD_MAX/dpr));
     } else if (minimumSize.width() > 0 || minimumSize.height() > 0) {
         rect.setSize(minimumSize);
     } else {
@@ -315,7 +357,7 @@ void QXcbWindow::create()
         }
         if (visualInfo) {
             m_depth = visualInfo->depth;
-            m_imageFormat = imageFormatForDepth(m_depth);
+            m_imageFormat = imageFormatForVisual(visualInfo->depth, visualInfo->red_mask, visualInfo->blue_mask);
             Colormap cmap = XCreateColormap(DISPLAY_FROM_XCB(this), xcb_parent_id, visualInfo->visual, AllocNone);
 
             XSetWindowAttributes a;
@@ -325,7 +367,9 @@ void QXcbWindow::create()
 
             m_visualId = visualInfo->visualid;
 
-            m_window = XCreateWindow(DISPLAY_FROM_XCB(this), xcb_parent_id, rect.x(), rect.y(), rect.width(), rect.height(),
+            const QRect xRect = mapToNative(rect, dpr);
+
+            m_window = XCreateWindow(DISPLAY_FROM_XCB(this), xcb_parent_id, xRect.x(), xRect.y(), xRect.width(), xRect.height(),
                                       0, visualInfo->depth, InputOutput, visualInfo->visual,
                                       CWBackPixel|CWBorderPixel|CWColormap, &a);
 
@@ -365,7 +409,8 @@ void QXcbWindow::create()
             }
         }
 
-        m_imageFormat = imageFormatForDepth(m_depth);
+        const xcb_visualtype_t *visual = m_screen->visualForId(m_visualId);
+        m_imageFormat = imageFormatForVisual(m_depth, visual->red_mask, visual->blue_mask);
 
         Q_XCB_CALL(xcb_create_window(xcb_connection(),
                                      m_depth,
@@ -466,22 +511,7 @@ void QXcbWindow::create()
                                    32, 2, (void *)data));
 
 
-#ifdef XCB_USE_XINPUT2_MAEMO
-    if (connection()->isUsingXInput2Maemo()) {
-        XIEventMask xieventmask;
-        uchar bitmask[2] = { 0, 0 };
-
-        xieventmask.deviceid = XIAllMasterDevices;
-        xieventmask.mask = bitmask;
-        xieventmask.mask_len = sizeof(bitmask);
-
-        XISetMask(bitmask, XI_ButtonPress);
-        XISetMask(bitmask, XI_ButtonRelease);
-        XISetMask(bitmask, XI_Motion);
-
-        XISelectEvents(DISPLAY_FROM_XCB(this), m_window, &xieventmask, 1);
-    }
-#elif defined(XCB_USE_XINPUT2)
+#if defined(XCB_USE_XINPUT2)
     connection()->xi2Select(m_window);
 #endif
 
@@ -540,6 +570,9 @@ void QXcbWindow::destroy()
     delete m_eglSurface;
     m_eglSurface = 0;
 #endif
+
+    if (m_pendingSyncRequest)
+        m_pendingSyncRequest->invalidate();
 }
 
 void QXcbWindow::setGeometry(const QRect &rect)
@@ -547,7 +580,9 @@ void QXcbWindow::setGeometry(const QRect &rect)
     QPlatformWindow::setGeometry(rect);
 
     propagateSizeHints();
-    const QRect wmGeometry = windowToWmGeometry(rect);
+
+    const QRect xRect = mapToNative(rect, int(devicePixelRatio()));
+    const QRect wmGeometry = windowToWmGeometry(xRect);
 
     if (qt_window_private(window())->positionAutomatic) {
         const quint32 mask = XCB_CONFIG_WINDOW_WIDTH | XCB_CONFIG_WINDOW_HEIGHT;
@@ -698,6 +733,11 @@ void QXcbWindow::show()
         updateNetWmStateBeforeMap();
     }
 
+    if (window()->metaObject()->indexOfProperty(wm_window_type_property_id) >= 0) {
+        QXcbWindowFunctions::WmWindowTypes wmWindowTypes(window()->property(wm_window_type_property_id).value<int>());
+        setWmWindowType(wmWindowTypes);
+    }
+
     if (connection()->time() != XCB_TIME_CURRENT_TIME)
         updateNetWmUserTime(connection()->time());
 
@@ -1425,23 +1465,26 @@ void QXcbWindow::propagateSizeHints()
     xcb_size_hints_t hints;
     memset(&hints, 0, sizeof(hints));
 
-    const QRect rect = windowToWmGeometry(geometry());
+    const int dpr = int(devicePixelRatio());
+    const QRect xRect = mapToNative(windowToWmGeometry(geometry()), dpr);
 
     QWindow *win = window();
 
     if (!qt_window_private(win)->positionAutomatic)
-        xcb_size_hints_set_position(&hints, true, rect.x(), rect.y());
-    if (rect.width() < QWINDOWSIZE_MAX || rect.height() < QWINDOWSIZE_MAX)
-        xcb_size_hints_set_size(&hints, true, rect.width(), rect.height());
+        xcb_size_hints_set_position(&hints, true, xRect.x(), xRect.y());
+    if (xRect.width() < QWINDOWSIZE_MAX || xRect.height() < QWINDOWSIZE_MAX)
+        xcb_size_hints_set_size(&hints, true, xRect.width(), xRect.height());
     xcb_size_hints_set_win_gravity(&hints, m_gravity);
 
-    QSize minimumSize = win->minimumSize();
-    QSize maximumSize = win->maximumSize();
-    QSize baseSize = win->baseSize();
-    QSize sizeIncrement = win->sizeIncrement();
+    QSize minimumSize = win->minimumSize() * dpr;
+    QSize maximumSize = win->maximumSize() * dpr;
+    QSize baseSize = win->baseSize() * dpr;
+    QSize sizeIncrement = win->sizeIncrement() * dpr;
 
     if (minimumSize.width() > 0 || minimumSize.height() > 0)
-        xcb_size_hints_set_min_size(&hints, minimumSize.width(), minimumSize.height());
+        xcb_size_hints_set_min_size(&hints,
+                                    qMin(XCOORD_MAX,minimumSize.width()),
+                                    qMin(XCOORD_MAX,minimumSize.height()));
 
     if (maximumSize.width() < QWINDOWSIZE_MAX || maximumSize.height() < QWINDOWSIZE_MAX)
         xcb_size_hints_set_max_size(&hints,
@@ -1497,23 +1540,6 @@ void QXcbWindow::requestActivateWindow()
     connection()->sync();
 }
 
-#if XCB_USE_MAEMO_WINDOW_PROPERTIES
-void QXcbWindow::handleContentOrientationChange(Qt::ScreenOrientation orientation)
-{
-    int angle = 0;
-    switch (orientation) {
-        case Qt::PortraitOrientation: angle = 270; break;
-        case Qt::LandscapeOrientation: angle = 0; break;
-        case Qt::InvertedPortraitOrientation: angle = 90; break;
-        case Qt::InvertedLandscapeOrientation: angle = 180; break;
-        case Qt::PrimaryOrientation: break;
-    }
-    Q_XCB_CALL(xcb_change_property(xcb_connection(), XCB_PROP_MODE_REPLACE, m_window,
-                                   atom(QXcbAtom::MeegoTouchOrientationAngle), XCB_ATOM_CARDINAL, 32,
-                                   1, &angle));
-}
-#endif
-
 QSurfaceFormat QXcbWindow::format() const
 {
     // ### return actual format
@@ -1535,12 +1561,137 @@ QXcbEGLSurface *QXcbWindow::eglSurface() const
 }
 #endif
 
+void QXcbWindow::setWmWindowTypeStatic(QWindow *window, QXcbWindowFunctions::WmWindowTypes windowTypes)
+{
+    if (window->handle())
+        static_cast<QXcbWindow *>(window->handle())->setWmWindowType(windowTypes);
+    else
+        window->setProperty(wm_window_type_property_id, QVariant::fromValue(static_cast<int>(windowTypes)));
+}
+
+QXcbWindowFunctions::WmWindowTypes QXcbWindow::wmWindowTypes() const
+{
+    QXcbWindowFunctions::WmWindowTypes result(0);
+
+    xcb_get_property_cookie_t get_cookie =
+        xcb_get_property_unchecked(xcb_connection(), 0, m_window, atom(QXcbAtom::_NET_WM_WINDOW_TYPE),
+                         XCB_ATOM_ATOM, 0, 1024);
+
+    xcb_get_property_reply_t *reply =
+        xcb_get_property_reply(xcb_connection(), get_cookie, NULL);
+
+    if (reply && reply->format == 32 && reply->type == XCB_ATOM_ATOM) {
+        const xcb_atom_t *types = static_cast<const xcb_atom_t *>(xcb_get_property_value(reply));
+        const xcb_atom_t *types_end = types + reply->length;
+        for (; types != types_end; types++) {
+            QXcbAtom::Atom type = connection()->qatom(*types);
+            switch (type) {
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_NORMAL:
+                result |= QXcbWindowFunctions::Normal;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_DESKTOP:
+                result |= QXcbWindowFunctions::Desktop;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_DOCK:
+                result |= QXcbWindowFunctions::Dock;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_TOOLBAR:
+                result |= QXcbWindowFunctions::Toolbar;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_MENU:
+                result |= QXcbWindowFunctions::Menu;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_UTILITY:
+                result |= QXcbWindowFunctions::Utility;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_SPLASH:
+                result |= QXcbWindowFunctions::Splash;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_DIALOG:
+                result |= QXcbWindowFunctions::Dialog;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_DROPDOWN_MENU:
+                result |= QXcbWindowFunctions::DropDownMenu;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_POPUP_MENU:
+                result |= QXcbWindowFunctions::PopupMenu;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_TOOLTIP:
+                result |= QXcbWindowFunctions::Tooltip;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_NOTIFICATION:
+                result |= QXcbWindowFunctions::Notification;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_COMBO:
+                result |= QXcbWindowFunctions::Combo;
+                break;
+            case QXcbAtom::_NET_WM_WINDOW_TYPE_DND:
+                result |= QXcbWindowFunctions::Dnd;
+                break;
+            case QXcbAtom::_KDE_NET_WM_WINDOW_TYPE_OVERRIDE:
+                result |= QXcbWindowFunctions::KdeOverride;
+                break;
+            default:
+                break;
+            }
+        }
+        free(reply);
+    }
+    return result;
+}
+
+void QXcbWindow::setWmWindowType(QXcbWindowFunctions::WmWindowTypes types)
+{
+    QVector<xcb_atom_t> atoms;
+
+    if (types & QXcbWindowFunctions::Normal)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_NORMAL));
+    if (types & QXcbWindowFunctions::Desktop)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_DESKTOP));
+    if (types & QXcbWindowFunctions::Dock)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_DOCK));
+    if (types & QXcbWindowFunctions::Toolbar)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_TOOLBAR));
+    if (types & QXcbWindowFunctions::Menu)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_MENU));
+    if (types & QXcbWindowFunctions::Utility)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_UTILITY));
+    if (types & QXcbWindowFunctions::Splash)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_SPLASH));
+    if (types & QXcbWindowFunctions::Dialog)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_DIALOG));
+    if (types & QXcbWindowFunctions::DropDownMenu)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_DROPDOWN_MENU));
+    if (types & QXcbWindowFunctions::PopupMenu)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_POPUP_MENU));
+    if (types & QXcbWindowFunctions::Tooltip)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_TOOLTIP));
+    if (types & QXcbWindowFunctions::Notification)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_NOTIFICATION));
+    if (types & QXcbWindowFunctions::Combo)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_COMBO));
+    if (types & QXcbWindowFunctions::Dnd)
+        atoms.append(atom(QXcbAtom::_NET_WM_WINDOW_TYPE_DND));
+    if (types & QXcbWindowFunctions::KdeOverride)
+        atoms.append(atom(QXcbAtom::_KDE_NET_WM_WINDOW_TYPE_OVERRIDE));
+
+    if (atoms.isEmpty()) {
+        Q_XCB_CALL(xcb_delete_property(xcb_connection(), m_window, atom(QXcbAtom::_NET_WM_WINDOW_TYPE)));
+    } else {
+        Q_XCB_CALL(xcb_change_property(xcb_connection(), XCB_PROP_MODE_REPLACE, m_window,
+                                       atom(QXcbAtom::_NET_WM_WINDOW_TYPE), XCB_ATOM_ATOM, 32,
+                                       atoms.count(), atoms.constData()));
+    }
+    xcb_flush(xcb_connection());
+}
+
 class ExposeCompressor
 {
 public:
-    ExposeCompressor(xcb_window_t window, QRegion *region)
+    ExposeCompressor(xcb_window_t window, QRegion *region, int devicePixelRatio)
         : m_window(window)
         , m_region(region)
+        , m_dpr(devicePixelRatio)
         , m_pending(true)
     {
     }
@@ -1556,7 +1707,7 @@ public:
             return false;
         if (expose->count == 0)
             m_pending = false;
-        *m_region |= QRect(expose->x, expose->y, expose->width, expose->height);
+        *m_region |= mapFromNative(QRect(expose->x, expose->y, expose->width, expose->height), m_dpr);
         return true;
     }
 
@@ -1568,6 +1719,7 @@ public:
 private:
     xcb_window_t m_window;
     QRegion *m_region;
+    int m_dpr;
     bool m_pending;
 };
 
@@ -1581,14 +1733,16 @@ bool QXcbWindow::handleGenericEvent(xcb_generic_event_t *event, long *result)
 
 void QXcbWindow::handleExposeEvent(const xcb_expose_event_t *event)
 {
-    QRect rect(event->x, event->y, event->width, event->height);
+    const int dpr = int(devicePixelRatio());
+    QRect x_rect(event->x, event->y, event->width, event->height);
+    QRect rect = mapFromNative(x_rect, dpr);
 
     if (m_exposeRegion.isEmpty())
         m_exposeRegion = rect;
     else
         m_exposeRegion |= rect;
 
-    ExposeCompressor compressor(m_window, &m_exposeRegion);
+    ExposeCompressor compressor(m_window, &m_exposeRegion, dpr);
     xcb_generic_event_t *filter = 0;
     do {
         filter = connection()->checkEvent(compressor);
@@ -1682,19 +1836,15 @@ void QXcbWindow::handleConfigureNotifyEvent(const xcb_configure_notify_event_t *
         }
     }
 
-    QRect rect(pos, QSize(event->width, event->height));
+    QRect rect = mapFromNative(QRect(pos, QSize(event->width, event->height)), int(devicePixelRatio()));
 
     QPlatformWindow::setGeometry(rect);
     QWindowSystemInterface::handleGeometryChange(window(), rect);
 
-    if (!m_screen->availableGeometry().intersects(rect)) {
-        Q_FOREACH (QPlatformScreen* screen, m_screen->virtualSiblings()) {
-            if (screen->availableGeometry().intersects(rect)) {
-                m_screen = static_cast<QXcbScreen*>(screen);
-                QWindowSystemInterface::handleWindowScreenChanged(window(), m_screen->QPlatformScreen::screen());
-                break;
-            }
-        }
+    QPlatformScreen *newScreen = screenForGeometry(rect);
+    if (newScreen != m_screen) {
+        m_screen = static_cast<QXcbScreen*>(newScreen);
+        QWindowSystemInterface::handleWindowScreenChanged(window(), newScreen->screen());
     }
 
     m_configureNotifyPending = false;
@@ -1728,15 +1878,16 @@ QPoint QXcbWindow::mapToGlobal(const QPoint &pos) const
     if (!m_embedded)
         return pos;
 
+    const int dpr = int(devicePixelRatio());
     QPoint ret;
     xcb_translate_coordinates_cookie_t cookie =
         xcb_translate_coordinates(xcb_connection(), xcb_window(), m_screen->root(),
-                                  pos.x(), pos.y());
+                                  pos.x() * dpr, pos.y() * dpr);
     xcb_translate_coordinates_reply_t *reply =
         xcb_translate_coordinates_reply(xcb_connection(), cookie, NULL);
     if (reply) {
-        ret.setX(reply->dst_x);
-        ret.setY(reply->dst_y);
+        ret.setX(reply->dst_x / dpr);
+        ret.setY(reply->dst_y / dpr);
         free(reply);
     }
 
@@ -1747,15 +1898,17 @@ QPoint QXcbWindow::mapFromGlobal(const QPoint &pos) const
 {
     if (!m_embedded)
         return pos;
+
+    const int dpr = int(devicePixelRatio());
     QPoint ret;
     xcb_translate_coordinates_cookie_t cookie =
         xcb_translate_coordinates(xcb_connection(), m_screen->root(), xcb_window(),
-                                  pos.x(), pos.y());
+                                  pos.x() *dpr, pos.y() * dpr);
     xcb_translate_coordinates_reply_t *reply =
         xcb_translate_coordinates_reply(xcb_connection(), cookie, NULL);
     if (reply) {
-        ret.setX(reply->dst_x);
-        ret.setY(reply->dst_y);
+        ret.setX(reply->dst_x / dpr);
+        ret.setY(reply->dst_y / dpr);
         free(reply);
     }
 
@@ -1771,7 +1924,7 @@ void QXcbWindow::handleMapNotifyEvent(const xcb_map_notify_event_t *event)
         if (m_configureNotifyPending)
             m_deferredExpose = true;
         else
-            QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(), geometry().size()));
+            QWindowSystemInterface::handleExposeEvent(window(), QRect(QPoint(), geometry().size() * int(devicePixelRatio())));
     }
 }
 
@@ -1802,9 +1955,9 @@ void QXcbWindow::handleButtonPressEvent(const xcb_button_press_event_t *event)
             sendXEmbedMessage(container->xcb_window(), XEMBED_REQUEST_FOCUS);
         }
     }
-
-    QPoint local(event->event_x, event->event_y);
-    QPoint global(event->root_x, event->root_y);
+    const int dpr = int(devicePixelRatio());
+    QPoint local(event->event_x/dpr, event->event_y/dpr);
+    QPoint global(event->root_x/dpr, event->root_y/dpr);
 
     Qt::KeyboardModifiers modifiers = connection()->keyboard()->translateModifiers(event->state);
 
@@ -1827,8 +1980,9 @@ void QXcbWindow::handleButtonPressEvent(const xcb_button_press_event_t *event)
 
 void QXcbWindow::handleButtonReleaseEvent(const xcb_button_release_event_t *event)
 {
-    QPoint local(event->event_x, event->event_y);
-    QPoint global(event->root_x, event->root_y);
+    const int dpr = int(devicePixelRatio());
+    QPoint local(event->event_x/dpr, event->event_y/dpr);
+    QPoint global(event->root_x/dpr, event->root_y/dpr);
     Qt::KeyboardModifiers modifiers = connection()->keyboard()->translateModifiers(event->state);
 
     if (event->detail >= 4 && event->detail <= 7) {
@@ -1841,8 +1995,9 @@ void QXcbWindow::handleButtonReleaseEvent(const xcb_button_release_event_t *even
 
 void QXcbWindow::handleMotionNotifyEvent(const xcb_motion_notify_event_t *event)
 {
-    QPoint local(event->event_x, event->event_y);
-    QPoint global(event->root_x, event->root_y);
+    const int dpr = int(devicePixelRatio());
+    QPoint local(event->event_x/dpr, event->event_y/dpr);
+    QPoint global(event->root_x/dpr, event->root_y/dpr);
     Qt::KeyboardModifiers modifiers = connection()->keyboard()->translateModifiers(event->state);
 
     handleMouseEvent(event->time, local, global, modifiers);
@@ -1892,9 +2047,9 @@ void QXcbWindow::handleEnterNotifyEvent(const xcb_enter_notify_event_t *event)
     {
         return;
     }
-
-    const QPoint local(event->event_x, event->event_y);
-    const QPoint global(event->root_x, event->root_y);
+    const int dpr = int(devicePixelRatio());
+    const QPoint local(event->event_x/dpr, event->event_y/dpr);
+    const QPoint global(event->root_x/dpr, event->root_y/dpr);
     QWindowSystemInterface::handleEnterEvent(window(), local, global);
 }
 
@@ -1914,8 +2069,9 @@ void QXcbWindow::handleLeaveNotifyEvent(const xcb_leave_notify_event_t *event)
     QXcbWindow *enterWindow = enter ? connection()->platformWindowFromId(enter->event) : 0;
 
     if (enterWindow) {
-        QPoint local(enter->event_x, enter->event_y);
-        QPoint global(enter->root_x, enter->root_y);
+        const int dpr = int(devicePixelRatio());
+        QPoint local(enter->event_x/dpr, enter->event_y/dpr);
+        QPoint global(enter->root_x/dpr, enter->root_y/dpr);
 
         QWindowSystemInterface::handleEnterLeaveEvent(enterWindow->window(), window(), local, global);
     } else {
@@ -1950,13 +2106,17 @@ void QXcbWindow::handlePropertyNotifyEvent(const xcb_property_notify_event_t *ev
                     newState = Qt::WindowMinimized;
             }
             free(reply);
+        } else { // _NET_WM_STATE can't change minimized state
+            if (m_lastWindowStateEvent == Qt::WindowMinimized)
+                newState = Qt::WindowMinimized;
         }
+
         if (newState != Qt::WindowMinimized) { // Something else changed, get _NET_WM_STATE.
             const NetWmStates states = netWmStates();
-            if ((states & NetWmStateMaximizedHorz) && (states & NetWmStateMaximizedVert))
-                newState = Qt::WindowMaximized;
-            else if (states & NetWmStateFullScreen)
+            if (states & NetWmStateFullScreen)
                 newState = Qt::WindowFullScreen;
+            else if ((states & NetWmStateMaximizedHorz) && (states & NetWmStateMaximizedVert))
+                newState = Qt::WindowMaximized;
         }
         // Send Window state, compress events in case other flags (modality, etc) are changed.
         if (m_lastWindowStateEvent != newState) {
@@ -2068,6 +2228,7 @@ void QXcbWindow::windowEvent(QEvent *event)
 
 bool QXcbWindow::startSystemResize(const QPoint &pos, Qt::Corner corner)
 {
+    const int dpr = int(devicePixelRatio());
     const xcb_atom_t moveResize = connection()->atom(QXcbAtom::_NET_WM_MOVERESIZE);
     if (!connection()->wmSupport()->isSupportedByWM(moveResize))
         return false;
@@ -2076,7 +2237,7 @@ bool QXcbWindow::startSystemResize(const QPoint &pos, Qt::Corner corner)
     xev.type = moveResize;
     xev.window = xcb_window();
     xev.format = 32;
-    const QPoint globalPos = window()->mapToGlobal(pos);
+    const QPoint globalPos = window()->mapToGlobal(pos) * dpr;
     xev.data.data32[0] = globalPos.x();
     xev.data.data32[1] = globalPos.y();
     const bool bottom = corner == Qt::BottomRightCorner || corner == Qt::BottomLeftCorner;
@@ -2194,9 +2355,10 @@ void QXcbWindow::setMask(const QRegion &region)
         xcb_shape_mask(connection()->xcb_connection(), XCB_SHAPE_SO_SET,
                        XCB_SHAPE_SK_BOUNDING, xcb_window(), 0, 0, XCB_NONE);
     } else {
+        const int dpr = devicePixelRatio();
         QVector<xcb_rectangle_t> rects;
         foreach (const QRect &r, region.rects())
-            rects.push_back(qRectToXCBRectangle(r));
+            rects.push_back(qRectToXCBRectangle(mapToNative(r, dpr)));
         xcb_shape_rectangles(connection()->xcb_connection(), XCB_SHAPE_SO_SET,
                              XCB_SHAPE_SK_BOUNDING, XCB_CLIP_ORDERING_UNSORTED,
                              xcb_window(), 0, 0, rects.size(), &rects[0]);
@@ -2221,4 +2383,18 @@ bool QXcbWindow::needsSync() const
     return m_syncState == SyncAndConfigureReceived;
 }
 
+void QXcbWindow::postSyncWindowRequest()
+{
+    if (!m_pendingSyncRequest) {
+        QXcbSyncWindowRequest *e = new QXcbSyncWindowRequest(this);
+        m_pendingSyncRequest = e;
+        QCoreApplication::postEvent(m_screen->connection(), e);
+    }
+}
+
+qreal QXcbWindow::devicePixelRatio() const
+{
+    return m_screen ? m_screen->devicePixelRatio() : 1.0;
+}
+
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/xcb/qxcbwindow.h b/src/plugins/platforms/xcb/qxcbwindow.h
index b924ee27e5..12d20d004d 100644
--- a/src/plugins/platforms/xcb/qxcbwindow.h
+++ b/src/plugins/platforms/xcb/qxcbwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,11 +43,15 @@
 
 #include "qxcbobject.h"
 
+#include <QtPlatformHeaders/qxcbwindowfunctions.h>
+
 QT_BEGIN_NAMESPACE
 
 class QXcbScreen;
 class QXcbEGLSurface;
+class QXcbSyncWindowRequest;
 class QIcon;
+
 class QXcbWindow : public QXcbObject, public QXcbWindowEventListener, public QPlatformWindow
 {
 public:
@@ -98,10 +94,6 @@ public:
 
     void requestActivateWindow();
 
-#if XCB_USE_MAEMO_WINDOW_PROPERTIES
-    void handleContentOrientationChange(Qt::ScreenOrientation orientation);
-#endif
-
     bool setKeyboardGrabEnabled(bool grab);
     bool setMouseGrabEnabled(bool grab);
 
@@ -150,8 +142,18 @@ public:
     QXcbEGLSurface *eglSurface() const;
 #endif
 
+    static void setWmWindowTypeStatic(QWindow *window, QXcbWindowFunctions::WmWindowTypes windowTypes);
+
+    QXcbWindowFunctions::WmWindowTypes wmWindowTypes() const;
+    void setWmWindowType(QXcbWindowFunctions::WmWindowTypes types);
+
     bool needsSync() const;
 
+    void postSyncWindowRequest();
+    void clearSyncWindowRequest() { m_pendingSyncRequest = 0; }
+
+    qreal devicePixelRatio() const;
+
 public Q_SLOTS:
     void updateSyncRequestCounter();
 
@@ -228,6 +230,8 @@ private:
         SyncAndConfigureReceived
     };
     SyncState m_syncState;
+
+    QXcbSyncWindowRequest *m_pendingSyncRequest;
 };
 
 QT_END_NAMESPACE
diff --git a/src/plugins/platforms/xcb/qxcbwmsupport.cpp b/src/plugins/platforms/xcb/qxcbwmsupport.cpp
index 21b9536861..0458be32f6 100644
--- a/src/plugins/platforms/xcb/qxcbwmsupport.cpp
+++ b/src/plugins/platforms/xcb/qxcbwmsupport.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbwmsupport.h b/src/plugins/platforms/xcb/qxcbwmsupport.h
index 2a9c48c84d..a5f7b948bb 100644
--- a/src/plugins/platforms/xcb/qxcbwmsupport.h
+++ b/src/plugins/platforms/xcb/qxcbwmsupport.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxcbxsettings.cpp b/src/plugins/platforms/xcb/qxcbxsettings.cpp
index 141a6cc0cb..6f2e60c9be 100644
--- a/src/plugins/platforms/xcb/qxcbxsettings.cpp
+++ b/src/plugins/platforms/xcb/qxcbxsettings.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #include "qxcbxsettings.h"
 
 #include <QtCore/QByteArray>
+#include <QtCore/QtEndian>
 
 #include <X11/extensions/XIproto.h>
 
@@ -149,47 +142,67 @@ public:
     {
         if (xSettings.length() < 12)
             return;
-        // we ignore byteorder for now
-        char byteOrder = xSettings.at(1);
-        Q_UNUSED(byteOrder);
-        uint number_of_settings = *reinterpret_cast<const uint *>(xSettings.mid(8,4).constData());
+        char byteOrder = xSettings.at(0);
+        if (byteOrder != LSBFirst && byteOrder != MSBFirst) {
+            qWarning("%s ByteOrder byte %d not 0 or 1", Q_FUNC_INFO , byteOrder);
+            return;
+        }
+
+#define ADJUST_BO(b, t, x) \
+        ((b == LSBFirst) ?                          \
+         qFromLittleEndian<t>((const uchar *)(x)) : \
+         qFromBigEndian<t>((const uchar *)(x)))
+#define VALIDATE_LENGTH(x)    \
+        if ((size_t)xSettings.length() < (offset + local_offset + 12 + x)) { \
+            qWarning("%s Length %d runs past end of data", Q_FUNC_INFO , x); \
+            return;                                                     \
+        }
 
+        uint number_of_settings = ADJUST_BO(byteOrder, quint32, xSettings.mid(8,4).constData());
         const char *data = xSettings.constData() + 12;
         size_t offset = 0;
         for (uint i = 0; i < number_of_settings; i++) {
             int local_offset = 0;
+            VALIDATE_LENGTH(2);
             XSettingsType type = static_cast<XSettingsType>(*reinterpret_cast<const quint8 *>(data + offset));
             local_offset += 2;
 
-            quint16 name_len = *reinterpret_cast<const quint16 *>(data + offset + local_offset);
+            VALIDATE_LENGTH(2);
+            quint16 name_len = ADJUST_BO(byteOrder, quint16, data + offset + local_offset);
             local_offset += 2;
 
+            VALIDATE_LENGTH(name_len);
             QByteArray name(data + offset + local_offset, name_len);
             local_offset += round_to_nearest_multiple_of_4(name_len);
 
-            int last_change_serial = *reinterpret_cast<const int *>(data + offset + local_offset);
+            VALIDATE_LENGTH(4);
+            int last_change_serial = ADJUST_BO(byteOrder, qint32, data + offset + local_offset);
             Q_UNUSED(last_change_serial);
             local_offset += 4;
 
             QVariant value;
             if (type == XSettingsTypeString) {
-                int value_length = *reinterpret_cast<const int *>(data + offset + local_offset);
+                VALIDATE_LENGTH(4);
+                int value_length = ADJUST_BO(byteOrder, qint32, data + offset + local_offset);
                 local_offset+=4;
+                VALIDATE_LENGTH(value_length);
                 QByteArray value_string(data + offset + local_offset, value_length);
                 value.setValue(value_string);
                 local_offset += round_to_nearest_multiple_of_4(value_length);
             } else if (type == XSettingsTypeInteger) {
-                int value_length = *reinterpret_cast<const int *>(data + offset + local_offset);
+                VALIDATE_LENGTH(4);
+                int value_length = ADJUST_BO(byteOrder, qint32, data + offset + local_offset);
                 local_offset += 4;
                 value.setValue(value_length);
             } else if (type == XSettingsTypeColor) {
-                quint16 red = *reinterpret_cast<const quint16 *>(data + offset + local_offset);
+                VALIDATE_LENGTH(2*4);
+                quint16 red = ADJUST_BO(byteOrder, quint16, data + offset + local_offset);
                 local_offset += 2;
-                quint16 green = *reinterpret_cast<const quint16 *>(data + offset + local_offset);
+                quint16 green = ADJUST_BO(byteOrder, quint16, data + offset + local_offset);
                 local_offset += 2;
-                quint16 blue = *reinterpret_cast<const quint16 *>(data + offset + local_offset);
+                quint16 blue = ADJUST_BO(byteOrder, quint16, data + offset + local_offset);
                 local_offset += 2;
-                quint16 alpha= *reinterpret_cast<const quint16 *>(data + offset + local_offset);
+                quint16 alpha= ADJUST_BO(byteOrder, quint16, data + offset + local_offset);
                 local_offset += 2;
                 QColor color_value(red,green,blue,alpha);
                 value.setValue(color_value);
diff --git a/src/plugins/platforms/xcb/qxcbxsettings.h b/src/plugins/platforms/xcb/qxcbxsettings.h
index f6a07a6091..717fe559c9 100644
--- a/src/plugins/platforms/xcb/qxcbxsettings.h
+++ b/src/plugins/platforms/xcb/qxcbxsettings.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxlibconvenience.cpp b/src/plugins/platforms/xcb/qxlibconvenience.cpp
index cdc7efc143..b5e9018c3f 100644
--- a/src/plugins/platforms/xcb/qxlibconvenience.cpp
+++ b/src/plugins/platforms/xcb/qxlibconvenience.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/qxlibconvenience.h b/src/plugins/platforms/xcb/qxlibconvenience.h
index 056c30b1cd..cc079a8cca 100644
--- a/src/plugins/platforms/xcb/qxlibconvenience.h
+++ b/src/plugins/platforms/xcb/qxlibconvenience.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platforms/xcb/xcb-plugin.pro b/src/plugins/platforms/xcb/xcb-plugin.pro
index 874d42c36c..9aaafadcad 100644
--- a/src/plugins/platforms/xcb/xcb-plugin.pro
+++ b/src/plugins/platforms/xcb/xcb-plugin.pro
@@ -50,20 +50,10 @@ contains(QT_CONFIG, xcb-xlib) {
     DEFINES += XCB_USE_XLIB
     LIBS += -lX11 -lX11-xcb
 
-    *-maemo* {
-        contains(QT_CONFIG, xinput2) {
-            # XInput2 support for Harmattan.
-            DEFINES += XCB_USE_XINPUT2_MAEMO
-            SOURCES += qxcbconnection_maemo.cpp
-            LIBS += -lXi
-        }
-        DEFINES += XCB_USE_MAEMO_WINDOW_PROPERTIES
-    } else {
-        contains(QT_CONFIG, xinput2) {
-            DEFINES += XCB_USE_XINPUT2
-            SOURCES += qxcbconnection_xi2.cpp
-            LIBS += -lXi
-        }
+    contains(QT_CONFIG, xinput2) {
+        DEFINES += XCB_USE_XINPUT2
+        SOURCES += qxcbconnection_xi2.cpp
+        LIBS += -lXi
     }
 }
 
diff --git a/src/plugins/platformthemes/gtk2/main.cpp b/src/plugins/platformthemes/gtk2/main.cpp
index 13e7d57b13..860a1f8b3f 100644
--- a/src/plugins/platformthemes/gtk2/main.cpp
+++ b/src/plugins/platformthemes/gtk2/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.cpp b/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.cpp
index 506c29c9cf..76221875b6 100644
--- a/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.cpp
+++ b/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.h b/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.h
index 47a6153fbc..9789c6750f 100644
--- a/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.h
+++ b/src/plugins/platformthemes/gtk2/qgtk2dialoghelpers.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/platformthemes/gtk2/qgtk2theme.cpp b/src/plugins/platformthemes/gtk2/qgtk2theme.cpp
index 812f4bc000..1a63682881 100644
--- a/src/plugins/platformthemes/gtk2/qgtk2theme.cpp
+++ b/src/plugins/platformthemes/gtk2/qgtk2theme.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,6 +77,14 @@ QVariant QGtk2Theme::themeHint(QPlatformTheme::ThemeHint hint) const
     }
 }
 
+QString QGtk2Theme::gtkFontName() const
+{
+    QString cfgFontName = gtkSetting("gtk-font-name");
+    if (!cfgFontName.isEmpty())
+        return cfgFontName;
+    return QGnomeTheme::gtkFontName();
+}
+
 bool QGtk2Theme::usePlatformNativeDialog(DialogType type) const
 {
     switch (type) {
diff --git a/src/plugins/platformthemes/gtk2/qgtk2theme.h b/src/plugins/platformthemes/gtk2/qgtk2theme.h
index a0bd34ed9f..304d7789f5 100644
--- a/src/plugins/platformthemes/gtk2/qgtk2theme.h
+++ b/src/plugins/platformthemes/gtk2/qgtk2theme.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,7 +43,8 @@ class QGtk2Theme : public QGnomeTheme
 public:
     QGtk2Theme();
 
-    QVariant themeHint(ThemeHint hint) const;
+    virtual QVariant themeHint(ThemeHint hint) const Q_DECL_OVERRIDE;
+    virtual QString gtkFontName() const Q_DECL_OVERRIDE;
 
     bool usePlatformNativeDialog(DialogType type) const;
     QPlatformDialogHelper *createPlatformDialogHelper(DialogType type) const;
diff --git a/src/plugins/plugins.pro b/src/plugins/plugins.pro
index 942db329ca..d1cbff59c1 100644
--- a/src/plugins/plugins.pro
+++ b/src/plugins/plugins.pro
@@ -3,6 +3,5 @@ TEMPLATE = subdirs
 SUBDIRS *= sqldrivers
 !winrt:qtHaveModule(network): SUBDIRS += bearer
 qtHaveModule(gui): SUBDIRS *= imageformats platforms platforminputcontexts platformthemes generic
-qtHaveModule(widgets): SUBDIRS += accessible
 
 !winrt:!wince*:qtHaveModule(widgets):SUBDIRS += printsupport
diff --git a/src/plugins/printsupport/cocoa/main.cpp b/src/plugins/printsupport/cocoa/main.cpp
index 41124590e3..82f4d79cac 100644
--- a/src/plugins/printsupport/cocoa/main.cpp
+++ b/src/plugins/printsupport/cocoa/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/main.cpp b/src/plugins/printsupport/cups/main.cpp
index 0048ee74db..5391b4dbeb 100644
--- a/src/plugins/printsupport/cups/main.cpp
+++ b/src/plugins/printsupport/cups/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/qcupsprintengine.cpp b/src/plugins/printsupport/cups/qcupsprintengine.cpp
index ec9963197c..724ff5b98b 100644
--- a/src/plugins/printsupport/cups/qcupsprintengine.cpp
+++ b/src/plugins/printsupport/cups/qcupsprintengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/qcupsprintengine_p.h b/src/plugins/printsupport/cups/qcupsprintengine_p.h
index 393fef42a3..a083b1840a 100644
--- a/src/plugins/printsupport/cups/qcupsprintengine_p.h
+++ b/src/plugins/printsupport/cups/qcupsprintengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/qcupsprintersupport.cpp b/src/plugins/printsupport/cups/qcupsprintersupport.cpp
index b2abb07fc7..87879d47be 100644
--- a/src/plugins/printsupport/cups/qcupsprintersupport.cpp
+++ b/src/plugins/printsupport/cups/qcupsprintersupport.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 John Layt <jlayt@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/qcupsprintersupport_p.h b/src/plugins/printsupport/cups/qcupsprintersupport_p.h
index 9fe5f28850..1dbdccec36 100644
--- a/src/plugins/printsupport/cups/qcupsprintersupport_p.h
+++ b/src/plugins/printsupport/cups/qcupsprintersupport_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2014 John Layt <jlayt@kde.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/qppdprintdevice.cpp b/src/plugins/printsupport/cups/qppdprintdevice.cpp
index 56ae5600c4..75e8a8bf26 100644
--- a/src/plugins/printsupport/cups/qppdprintdevice.cpp
+++ b/src/plugins/printsupport/cups/qppdprintdevice.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/cups/qppdprintdevice.h b/src/plugins/printsupport/cups/qppdprintdevice.h
index 982f46d71f..832ac5452a 100644
--- a/src/plugins/printsupport/cups/qppdprintdevice.h
+++ b/src/plugins/printsupport/cups/qppdprintdevice.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/windows/main.cpp b/src/plugins/printsupport/windows/main.cpp
index f642baa62a..2f083ae668 100644
--- a/src/plugins/printsupport/windows/main.cpp
+++ b/src/plugins/printsupport/windows/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/windows/qwindowsprintdevice.cpp b/src/plugins/printsupport/windows/qwindowsprintdevice.cpp
index 915d8380c7..1a6f40722d 100644
--- a/src/plugins/printsupport/windows/qwindowsprintdevice.cpp
+++ b/src/plugins/printsupport/windows/qwindowsprintdevice.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/windows/qwindowsprintdevice.h b/src/plugins/printsupport/windows/qwindowsprintdevice.h
index 2d11787305..db9bc02aa0 100644
--- a/src/plugins/printsupport/windows/qwindowsprintdevice.h
+++ b/src/plugins/printsupport/windows/qwindowsprintdevice.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/windows/qwindowsprinterinfo.cpp b/src/plugins/printsupport/windows/qwindowsprinterinfo.cpp
index 507f8db809..95a541e8c7 100644
--- a/src/plugins/printsupport/windows/qwindowsprinterinfo.cpp
+++ b/src/plugins/printsupport/windows/qwindowsprinterinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/windows/qwindowsprintersupport.cpp b/src/plugins/printsupport/windows/qwindowsprintersupport.cpp
index 997082a367..6762697b4e 100644
--- a/src/plugins/printsupport/windows/qwindowsprintersupport.cpp
+++ b/src/plugins/printsupport/windows/qwindowsprintersupport.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/printsupport/windows/qwindowsprintersupport.h b/src/plugins/printsupport/windows/qwindowsprintersupport.h
index 6a84b667dd..81d30245b2 100644
--- a/src/plugins/printsupport/windows/qwindowsprintersupport.h
+++ b/src/plugins/printsupport/windows/qwindowsprintersupport.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/db2/main.cpp b/src/plugins/sqldrivers/db2/main.cpp
index 6c796beff6..436d604549 100644
--- a/src/plugins/sqldrivers/db2/main.cpp
+++ b/src/plugins/sqldrivers/db2/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/ibase/main.cpp b/src/plugins/sqldrivers/ibase/main.cpp
index e7d1c38690..70e2b9c9c1 100644
--- a/src/plugins/sqldrivers/ibase/main.cpp
+++ b/src/plugins/sqldrivers/ibase/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/mysql/main.cpp b/src/plugins/sqldrivers/mysql/main.cpp
index 8aaee6c268..9448db59b1 100644
--- a/src/plugins/sqldrivers/mysql/main.cpp
+++ b/src/plugins/sqldrivers/mysql/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/oci/main.cpp b/src/plugins/sqldrivers/oci/main.cpp
index f1b0266536..44618b5869 100644
--- a/src/plugins/sqldrivers/oci/main.cpp
+++ b/src/plugins/sqldrivers/oci/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/odbc/main.cpp b/src/plugins/sqldrivers/odbc/main.cpp
index fda5c68fcc..74df46b75a 100644
--- a/src/plugins/sqldrivers/odbc/main.cpp
+++ b/src/plugins/sqldrivers/odbc/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/psql/main.cpp b/src/plugins/sqldrivers/psql/main.cpp
index 3851ba6bfe..49217e8f1e 100644
--- a/src/plugins/sqldrivers/psql/main.cpp
+++ b/src/plugins/sqldrivers/psql/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/sqlite/smain.cpp b/src/plugins/sqldrivers/sqlite/smain.cpp
index 1835962331..3b0ca5aaba 100644
--- a/src/plugins/sqldrivers/sqlite/smain.cpp
+++ b/src/plugins/sqldrivers/sqlite/smain.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/sqlite2/smain.cpp b/src/plugins/sqldrivers/sqlite2/smain.cpp
index e15834a18e..f8b391894a 100644
--- a/src/plugins/sqldrivers/sqlite2/smain.cpp
+++ b/src/plugins/sqldrivers/sqlite2/smain.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/sqldrivers/tds/main.cpp b/src/plugins/sqldrivers/tds/main.cpp
index 1cb04e9e07..d8c753404b 100644
--- a/src/plugins/sqldrivers/tds/main.cpp
+++ b/src/plugins/sqldrivers/tds/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qabstractprintdialog.cpp b/src/printsupport/dialogs/qabstractprintdialog.cpp
index 0de51208db..3de38a1c98 100644
--- a/src/printsupport/dialogs/qabstractprintdialog.cpp
+++ b/src/printsupport/dialogs/qabstractprintdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qabstractprintdialog.h b/src/printsupport/dialogs/qabstractprintdialog.h
index 87979310b5..f3e865eb9c 100644
--- a/src/printsupport/dialogs/qabstractprintdialog.h
+++ b/src/printsupport/dialogs/qabstractprintdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qabstractprintdialog_p.h b/src/printsupport/dialogs/qabstractprintdialog_p.h
index d4ff0753fa..199629c74d 100644
--- a/src/printsupport/dialogs/qabstractprintdialog_p.h
+++ b/src/printsupport/dialogs/qabstractprintdialog_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qpagesetupdialog.cpp b/src/printsupport/dialogs/qpagesetupdialog.cpp
index 6fa901fc45..7d400d484f 100644
--- a/src/printsupport/dialogs/qpagesetupdialog.cpp
+++ b/src/printsupport/dialogs/qpagesetupdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qpagesetupdialog.h b/src/printsupport/dialogs/qpagesetupdialog.h
index c316e42166..a6edf91cd1 100644
--- a/src/printsupport/dialogs/qpagesetupdialog.h
+++ b/src/printsupport/dialogs/qpagesetupdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qpagesetupdialog_p.h b/src/printsupport/dialogs/qpagesetupdialog_p.h
index ba2f0da06a..d430829b97 100644
--- a/src/printsupport/dialogs/qpagesetupdialog_p.h
+++ b/src/printsupport/dialogs/qpagesetupdialog_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qpagesetupdialog_unix.cpp b/src/printsupport/dialogs/qpagesetupdialog_unix.cpp
index b9041bb242..a013ed82d3 100644
--- a/src/printsupport/dialogs/qpagesetupdialog_unix.cpp
+++ b/src/printsupport/dialogs/qpagesetupdialog_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qpagesetupdialog_unix_p.h b/src/printsupport/dialogs/qpagesetupdialog_unix_p.h
index 2a359a8118..632066280c 100644
--- a/src/printsupport/dialogs/qpagesetupdialog_unix_p.h
+++ b/src/printsupport/dialogs/qpagesetupdialog_unix_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qpagesetupdialog_win.cpp b/src/printsupport/dialogs/qpagesetupdialog_win.cpp
index fd3a676369..9185705bcf 100644
--- a/src/printsupport/dialogs/qpagesetupdialog_win.cpp
+++ b/src/printsupport/dialogs/qpagesetupdialog_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qprintdialog.h b/src/printsupport/dialogs/qprintdialog.h
index 886cd1e08d..437c2831d4 100644
--- a/src/printsupport/dialogs/qprintdialog.h
+++ b/src/printsupport/dialogs/qprintdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qprintdialog_unix.cpp b/src/printsupport/dialogs/qprintdialog_unix.cpp
index ab31db76aa..f40a08dd7e 100644
--- a/src/printsupport/dialogs/qprintdialog_unix.cpp
+++ b/src/printsupport/dialogs/qprintdialog_unix.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qprintdialog_win.cpp b/src/printsupport/dialogs/qprintdialog_win.cpp
index 722f0e186f..1c1b2c55c8 100644
--- a/src/printsupport/dialogs/qprintdialog_win.cpp
+++ b/src/printsupport/dialogs/qprintdialog_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qprintpreviewdialog.cpp b/src/printsupport/dialogs/qprintpreviewdialog.cpp
index c0c8a759aa..9c40e7dd51 100644
--- a/src/printsupport/dialogs/qprintpreviewdialog.cpp
+++ b/src/printsupport/dialogs/qprintpreviewdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/dialogs/qprintpreviewdialog.h b/src/printsupport/dialogs/qprintpreviewdialog.h
index b9c8737746..423a27db12 100644
--- a/src/printsupport/dialogs/qprintpreviewdialog.h
+++ b/src/printsupport/dialogs/qprintpreviewdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/doc/qtprintsupport.qdocconf b/src/printsupport/doc/qtprintsupport.qdocconf
index 4d1f0c39f1..2ec33f6600 100644
--- a/src/printsupport/doc/qtprintsupport.qdocconf
+++ b/src/printsupport/doc/qtprintsupport.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtPrintSupport
 description             = Qt Print Support Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = printsupport
diff --git a/src/printsupport/kernel/qcups.cpp b/src/printsupport/kernel/qcups.cpp
index c6e3ddb54d..1a27fbd07c 100644
--- a/src/printsupport/kernel/qcups.cpp
+++ b/src/printsupport/kernel/qcups.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -67,61 +59,49 @@ void QCUPSSupport::setCupsOption(QStringList &cupsOptions, const QString &option
     }
 }
 
-void QCUPSSupport::setJobHold(QPrinter *printer, const JobHoldUntil jobHold, const QTime &holdUntilTime)
+static inline QString jobHoldToString(const QCUPSSupport::JobHoldUntil jobHold, const QTime holdUntilTime)
 {
-    QStringList cupsOptions = cupsOptionsList(printer);
-
     switch (jobHold) {
-    case NoHold: //default
-        break;
-    case Indefinite:
-        setCupsOption(cupsOptions,
-                      QStringLiteral("job-hold-until"),
-                      QStringLiteral("indefinite"));
-        break;
-    case DayTime:
-        setCupsOption(cupsOptions,
-                      QStringLiteral("job-hold-until"),
-                      QStringLiteral("day-time"));
-        break;
-    case Night:
-        setCupsOption(cupsOptions,
-                      QStringLiteral("job-hold-until"),
-                      QStringLiteral("night"));
-        break;
-    case SecondShift:
-        setCupsOption(cupsOptions,
-                      QStringLiteral("job-hold-until"),
-                      QStringLiteral("second-shift"));
-        break;
-    case ThirdShift:
-        setCupsOption(cupsOptions,
-                      QStringLiteral("job-hold-until"),
-                      QStringLiteral("third-shift"));
-        break;
-    case Weekend:
-        setCupsOption(cupsOptions,
-                      QStringLiteral("job-hold-until"),
-                      QStringLiteral("weekend"));
-        break;
-    case SpecificTime:
-        if (holdUntilTime.isNull()) {
-            setJobHold(printer, NoHold);
-            return;
+    case QCUPSSupport::Indefinite:
+        return QStringLiteral("indefinite");
+    case QCUPSSupport::DayTime:
+        return QStringLiteral("day-time");
+    case QCUPSSupport::Night:
+        return QStringLiteral("night");
+    case QCUPSSupport::SecondShift:
+        return QStringLiteral("second-shift");
+    case QCUPSSupport::ThirdShift:
+        return QStringLiteral("third-shift");
+    case QCUPSSupport::Weekend:
+        return QStringLiteral("weekend");
+    case QCUPSSupport::SpecificTime:
+        if (!holdUntilTime.isNull()) {
+            // CUPS expects the time in UTC, user has entered in local time, so get the UTS equivalent
+            QDateTime localDateTime = QDateTime::currentDateTime();
+            // Check if time is for tomorrow in case of DST change overnight
+            if (holdUntilTime < localDateTime.time())
+                localDateTime = localDateTime.addDays(1);
+            localDateTime.setTime(holdUntilTime);
+            return localDateTime.toUTC().time().toString(QStringLiteral("HH:mm"));
         }
-        // CUPS expects the time in UTC, user has entered in local time, so get the UTS equivalent
-        QDateTime localDateTime = QDateTime::currentDateTime();
-        // Check if time is for tomorrow in case of DST change overnight
-        if (holdUntilTime < localDateTime.time())
-            localDateTime = localDateTime.addDays(1);
-        localDateTime.setTime(holdUntilTime);
+        // else fall through:
+    case QCUPSSupport::NoHold:
+        return QString();
+    }
+    Q_UNREACHABLE();
+    return QString();
+}
+
+void QCUPSSupport::setJobHold(QPrinter *printer, const JobHoldUntil jobHold, const QTime &holdUntilTime)
+{
+    const QString jobHoldUntilArgument = jobHoldToString(jobHold, holdUntilTime);
+    if (!jobHoldUntilArgument.isEmpty()) {
+        QStringList cupsOptions = cupsOptionsList(printer);
         setCupsOption(cupsOptions,
                       QStringLiteral("job-hold-until"),
-                      localDateTime.toUTC().time().toString(QStringLiteral("HH:mm")));
-        break;
+                      jobHoldUntilArgument);
+        setCupsOptions(printer, cupsOptions);
     }
-
-    setCupsOptions(printer, cupsOptions);
 }
 
 void QCUPSSupport::setJobBilling(QPrinter *printer, const QString &jobBilling)
@@ -138,58 +118,26 @@ void QCUPSSupport::setJobPriority(QPrinter *printer, int priority)
     setCupsOptions(printer, cupsOptions);
 }
 
-void QCUPSSupport::setBannerPages(QPrinter *printer, const BannerPage startBannerPage, const BannerPage endBannerPage)
+static inline QString bannerPageToString(const QCUPSSupport::BannerPage bannerPage)
 {
-    QStringList cupsOptions = cupsOptionsList(printer);
-    QString startBanner, endBanner;
-
-    switch (startBannerPage) {
-    case NoBanner:
-        startBanner = QStringLiteral("none");
-        break;
-    case Standard:
-        startBanner = QStringLiteral("standard");
-        break;
-    case Unclassified:
-        startBanner = QStringLiteral("unclassified");
-        break;
-    case Confidential:
-        startBanner = QStringLiteral("confidential");
-        break;
-    case Classified:
-        startBanner = QStringLiteral("classified");
-        break;
-    case Secret:
-        startBanner = QStringLiteral("secret");
-        break;
-    case TopSecret:
-        startBanner = QStringLiteral("topsecret");
-        break;
+    switch (bannerPage) {
+    case QCUPSSupport::NoBanner:     return QStringLiteral("none");
+    case QCUPSSupport::Standard:     return QStringLiteral("standard");
+    case QCUPSSupport::Unclassified: return QStringLiteral("unclassified");
+    case QCUPSSupport::Confidential: return QStringLiteral("confidential");
+    case QCUPSSupport::Classified:   return QStringLiteral("classified");
+    case QCUPSSupport::Secret:       return QStringLiteral("secret");
+    case QCUPSSupport::TopSecret:    return QStringLiteral("topsecret");
     }
+    Q_UNREACHABLE();
+    return QString();
+};
 
-    switch (endBannerPage) {
-    case NoBanner:
-        endBanner = QStringLiteral("none");
-        break;
-    case Standard:
-        endBanner = QStringLiteral("standard");
-        break;
-    case Unclassified:
-        endBanner = QStringLiteral("unclassified");
-        break;
-    case Confidential:
-        endBanner = QStringLiteral("confidential");
-        break;
-    case Classified:
-        endBanner = QStringLiteral("classified");
-        break;
-    case Secret:
-        endBanner = QStringLiteral("secret");
-        break;
-    case TopSecret:
-        endBanner = QStringLiteral("topsecret");
-        break;
-    }
+void QCUPSSupport::setBannerPages(QPrinter *printer, const BannerPage startBannerPage, const BannerPage endBannerPage)
+{
+    QStringList cupsOptions = cupsOptionsList(printer);
+    const QString startBanner = bannerPageToString(startBannerPage);
+    const QString endBanner   = bannerPageToString(endBannerPage);
 
     setCupsOption(cupsOptions, QStringLiteral("job-sheets"), startBanner + QLatin1Char(',') + endBanner);
     setCupsOptions(printer, cupsOptions);
diff --git a/src/printsupport/kernel/qcups_p.h b/src/printsupport/kernel/qcups_p.h
index 0b327d4228..2834ec4be7 100644
--- a/src/printsupport/kernel/qcups_p.h
+++ b/src/printsupport/kernel/qcups_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qpaintengine_alpha.cpp b/src/printsupport/kernel/qpaintengine_alpha.cpp
index 6d292a6a71..60876ff2d9 100644
--- a/src/printsupport/kernel/qpaintengine_alpha.cpp
+++ b/src/printsupport/kernel/qpaintengine_alpha.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -166,11 +158,14 @@ void QAlphaPaintEngine::drawPath(const QPainterPath &path)
 
     if (d->m_pass == 0) {
         d->m_continueCall = false;
-        if (d->m_hasalpha || d->m_advancedPen || d->m_advancedBrush
+        if (d->canSeeTroughBackground(d->m_hasalpha, tr) || d->m_advancedPen || d->m_advancedBrush
             || d->m_emulateProjectiveTransforms)
         {
             d->addAlphaRect(tr);
         }
+
+        d->addDirtyRect(tr);
+
         if (d->m_picengine)
             d->m_picengine->drawPath(path);
     } else {
@@ -192,12 +187,14 @@ void QAlphaPaintEngine::drawPolygon(const QPointF *points, int pointCount, Polyg
 
     if (d->m_pass == 0) {
         d->m_continueCall = false;
-        if (d->m_hasalpha || d->m_advancedPen || d->m_advancedBrush
+        if (d->canSeeTroughBackground(d->m_hasalpha, tr) || d->m_advancedPen || d->m_advancedBrush
             || d->m_emulateProjectiveTransforms)
         {
             d->addAlphaRect(tr);
         }
 
+        d->addDirtyRect(tr);
+
         if (d->m_picengine)
             d->m_picengine->drawPolygon(points, pointCount, mode);
     } else {
@@ -212,10 +209,12 @@ void QAlphaPaintEngine::drawPixmap(const QRectF &r, const QPixmap &pm, const QRe
     QRectF tr = d->m_transform.mapRect(r);
     if (d->m_pass == 0) {
         d->m_continueCall = false;
-        if (pm.hasAlpha() || d->m_alphaOpacity || d->m_complexTransform || pm.isQBitmap()) {
+        if (d->canSeeTroughBackground(pm.hasAlpha() || d->m_alphaOpacity, tr) || d->m_complexTransform || pm.isQBitmap()) {
             d->addAlphaRect(tr);
         }
 
+        d->addDirtyRect(tr);
+
         if (d->m_picengine)
             d->m_picengine->drawPixmap(r, pm, sr);
 
@@ -233,9 +232,12 @@ void QAlphaPaintEngine::drawTextItem(const QPointF &p, const QTextItem &textItem
 
     if (d->m_pass == 0) {
         d->m_continueCall = false;
-        if (d->m_alphaPen || d->m_alphaOpacity || d->m_advancedPen) {
+        if (d->canSeeTroughBackground(d->m_alphaPen || d->m_alphaOpacity, tr) || d->m_advancedPen) {
             d->addAlphaRect(tr);
         }
+
+        d->addDirtyRect(tr);
+
         if (d->m_picengine) {
             d->m_picengine->drawTextItem(p, textItem);
         }
@@ -252,9 +254,12 @@ void QAlphaPaintEngine::drawTiledPixmap(const QRectF &r, const QPixmap &pixmap,
 
     if (d->m_pass == 0) {
         d->m_continueCall = false;
-        if (pixmap.hasAlpha() || d->m_alphaOpacity || d->m_complexTransform || pixmap.isQBitmap()) {
+        if (d->canSeeTroughBackground(pixmap.hasAlpha() || d->m_alphaOpacity, brect) || d->m_complexTransform || pixmap.isQBitmap()) {
             d->addAlphaRect(brect);
         }
+
+        d->addDirtyRect(brect);
+
         if (d->m_picengine)
             d->m_picengine->drawTiledPixmap(r, pixmap, s);
     } else {
@@ -413,19 +418,14 @@ QRectF QAlphaPaintEnginePrivate::addPenWidth(const QPainterPath &path)
     return (tmp.controlPointRect() * m_transform).boundingRect();
 }
 
-QRect QAlphaPaintEnginePrivate::toRect(const QRectF &rect) const
+void QAlphaPaintEnginePrivate::addAlphaRect(const QRectF &rect)
 {
-    QRect r;
-    r.setLeft(int(rect.left()));
-    r.setTop(int(rect.top()));
-    r.setRight(int(rect.right() + 1));
-    r.setBottom(int(rect.bottom() + 1));
-    return r;
+    m_alphargn |= rect.toAlignedRect();
 }
 
-void QAlphaPaintEnginePrivate::addAlphaRect(const QRectF &rect)
+bool QAlphaPaintEnginePrivate::canSeeTroughBackground(bool somethingInRectHasAlpha, const QRectF &rect) const
 {
-    m_alphargn |= toRect(rect);
+    return somethingInRectHasAlpha && m_dirtyrgn.intersects(rect.toAlignedRect());
 }
 
 void QAlphaPaintEnginePrivate::drawAlphaImage(const QRectF &rect)
@@ -477,7 +477,7 @@ void QAlphaPaintEnginePrivate::drawAlphaImage(const QRectF &rect)
 
 bool QAlphaPaintEnginePrivate::fullyContained(const QRectF &rect) const
 {
-    QRegion r(toRect(rect));
+    QRegion r(rect.toAlignedRect());
     return (m_cliprgn.intersected(r) == r);
 }
 
diff --git a/src/printsupport/kernel/qpaintengine_alpha_p.h b/src/printsupport/kernel/qpaintengine_alpha_p.h
index 8a0781d0d3..bbb38d7d10 100644
--- a/src/printsupport/kernel/qpaintengine_alpha_p.h
+++ b/src/printsupport/kernel/qpaintengine_alpha_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -107,6 +99,7 @@ public:
 
     QRegion m_alphargn;
     QRegion m_cliprgn;
+    QRegion m_dirtyrgn;
 
     bool m_hasalpha;
     bool m_alphaPen;
@@ -122,6 +115,9 @@ public:
     QPen m_pen;
 
     void addAlphaRect(const QRectF &rect);
+    void addDirtyRect(const QRectF &rect) { m_dirtyrgn |= rect.toAlignedRect(); }
+    bool canSeeTroughBackground(bool somethingInRectHasAlpha, const QRectF &rect) const;
+
     QRectF addPenWidth(const QPainterPath &path);
     void drawAlphaImage(const QRectF &rect);
     QRect toRect(const QRectF &rect) const;
diff --git a/src/printsupport/kernel/qpaintengine_preview.cpp b/src/printsupport/kernel/qpaintengine_preview.cpp
index d0578c5543..c0d16067bb 100644
--- a/src/printsupport/kernel/qpaintengine_preview.cpp
+++ b/src/printsupport/kernel/qpaintengine_preview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qpaintengine_preview_p.h b/src/printsupport/kernel/qpaintengine_preview_p.h
index 38492d20b0..ea997ed2d7 100644
--- a/src/printsupport/kernel/qpaintengine_preview_p.h
+++ b/src/printsupport/kernel/qpaintengine_preview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qplatformprintdevice.cpp b/src/printsupport/kernel/qplatformprintdevice.cpp
index 4932bf1d04..5300f54e77 100644
--- a/src/printsupport/kernel/qplatformprintdevice.cpp
+++ b/src/printsupport/kernel/qplatformprintdevice.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qplatformprintdevice.h b/src/printsupport/kernel/qplatformprintdevice.h
index 7674c50c2f..b31a7f26b9 100644
--- a/src/printsupport/kernel/qplatformprintdevice.h
+++ b/src/printsupport/kernel/qplatformprintdevice.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qplatformprintersupport.cpp b/src/printsupport/kernel/qplatformprintersupport.cpp
index 1494155302..882cb31df3 100644
--- a/src/printsupport/kernel/qplatformprintersupport.cpp
+++ b/src/printsupport/kernel/qplatformprintersupport.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qplatformprintersupport.h b/src/printsupport/kernel/qplatformprintersupport.h
index 0efec08f64..0669989876 100644
--- a/src/printsupport/kernel/qplatformprintersupport.h
+++ b/src/printsupport/kernel/qplatformprintersupport.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qplatformprintplugin.cpp b/src/printsupport/kernel/qplatformprintplugin.cpp
index f3e88e7cf7..8ce4008f4f 100644
--- a/src/printsupport/kernel/qplatformprintplugin.cpp
+++ b/src/printsupport/kernel/qplatformprintplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qplatformprintplugin.h b/src/printsupport/kernel/qplatformprintplugin.h
index 4a5a94616a..67d8c40d43 100644
--- a/src/printsupport/kernel/qplatformprintplugin.h
+++ b/src/printsupport/kernel/qplatformprintplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprint_p.h b/src/printsupport/kernel/qprint_p.h
index 30f7c4a65e..c674290d16 100644
--- a/src/printsupport/kernel/qprint_p.h
+++ b/src/printsupport/kernel/qprint_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprintdevice.cpp b/src/printsupport/kernel/qprintdevice.cpp
index eb0af455ee..9f05b09392 100644
--- a/src/printsupport/kernel/qprintdevice.cpp
+++ b/src/printsupport/kernel/qprintdevice.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprintdevice_p.h b/src/printsupport/kernel/qprintdevice_p.h
index 4d63d46aeb..5a72104b35 100644
--- a/src/printsupport/kernel/qprintdevice_p.h
+++ b/src/printsupport/kernel/qprintdevice_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprintengine.h b/src/printsupport/kernel/qprintengine.h
index a69fe01fd4..20ce8314f5 100644
--- a/src/printsupport/kernel/qprintengine.h
+++ b/src/printsupport/kernel/qprintengine.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprintengine_pdf.cpp b/src/printsupport/kernel/qprintengine_pdf.cpp
index a2ab68a96d..5016840bda 100644
--- a/src/printsupport/kernel/qprintengine_pdf.cpp
+++ b/src/printsupport/kernel/qprintengine_pdf.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprintengine_pdf_p.h b/src/printsupport/kernel/qprintengine_pdf_p.h
index 80d81b4ed3..e78950eb97 100644
--- a/src/printsupport/kernel/qprintengine_pdf_p.h
+++ b/src/printsupport/kernel/qprintengine_pdf_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprintengine_win.cpp b/src/printsupport/kernel/qprintengine_win.cpp
index 98a0844baa..14ffcaca96 100644
--- a/src/printsupport/kernel/qprintengine_win.cpp
+++ b/src/printsupport/kernel/qprintengine_win.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -573,7 +565,13 @@ void QWin32PrintEngine::drawPixmap(const QRectF &targetRect,
                 width = (tw - (x * txinc));
             }
 
-            QPixmap p = pixmap.copy(tileSize * x, tileSize * y, imgw, imgh);
+
+            QImage img(QSize(imgw, imgh), QImage::Format_RGB32);
+            img.fill(Qt::white);
+            QPainter painter(&img);
+            painter.drawPixmap(0,0, pixmap, tileSize * x, tileSize * y, imgw, imgh);
+            QPixmap p = QPixmap::fromImage(img);
+
             HBITMAP hbitmap = qt_pixmapToWinHBITMAP(p, HBitmapNoAlpha);
             HDC display_dc = GetDC(0);
             HDC hbitmap_hdc = CreateCompatibleDC(display_dc);
@@ -1416,6 +1414,9 @@ QVariant QWin32PrintEngine::property(PrintEnginePropertyKey key) const
         value.setValue(d->m_pageLayout);
         break;
 
+    case PPK_CustomBase:
+        break;
+
     // No default so that compiler will complain if new keys added and not handled in this engine
     }
     return value;
diff --git a/src/printsupport/kernel/qprintengine_win_p.h b/src/printsupport/kernel/qprintengine_win_p.h
index f698992425..b84bde8a92 100644
--- a/src/printsupport/kernel/qprintengine_win_p.h
+++ b/src/printsupport/kernel/qprintengine_win_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprinter.cpp b/src/printsupport/kernel/qprinter.cpp
index c758d9f4ea..8d62580d67 100644
--- a/src/printsupport/kernel/qprinter.cpp
+++ b/src/printsupport/kernel/qprinter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprinter.h b/src/printsupport/kernel/qprinter.h
index fa102d0fe3..1f0edaf1f3 100644
--- a/src/printsupport/kernel/qprinter.h
+++ b/src/printsupport/kernel/qprinter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprinter_p.h b/src/printsupport/kernel/qprinter_p.h
index ddc2dad413..18293b752d 100644
--- a/src/printsupport/kernel/qprinter_p.h
+++ b/src/printsupport/kernel/qprinter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprinterinfo.h b/src/printsupport/kernel/qprinterinfo.h
index 73ec48dfe7..a4754c48dc 100644
--- a/src/printsupport/kernel/qprinterinfo.h
+++ b/src/printsupport/kernel/qprinterinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qprinterinfo_p.h b/src/printsupport/kernel/qprinterinfo_p.h
index 7083356e1c..23c71c8d56 100644
--- a/src/printsupport/kernel/qprinterinfo_p.h
+++ b/src/printsupport/kernel/qprinterinfo_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/kernel/qtprintsupportglobal.h b/src/printsupport/kernel/qtprintsupportglobal.h
index 0fdb306e8d..96c88e6383 100644
--- a/src/printsupport/kernel/qtprintsupportglobal.h
+++ b/src/printsupport/kernel/qtprintsupportglobal.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/widgets/qcupsjobwidget.cpp b/src/printsupport/widgets/qcupsjobwidget.cpp
index 7fd3e0105d..0a82b16877 100644
--- a/src/printsupport/widgets/qcupsjobwidget.cpp
+++ b/src/printsupport/widgets/qcupsjobwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/widgets/qcupsjobwidget_p.h b/src/printsupport/widgets/qcupsjobwidget_p.h
index 2a50a12b89..b7b75f0c3c 100644
--- a/src/printsupport/widgets/qcupsjobwidget_p.h
+++ b/src/printsupport/widgets/qcupsjobwidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtPrintSupport module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/widgets/qprintpreviewwidget.cpp b/src/printsupport/widgets/qprintpreviewwidget.cpp
index 3ef1e882fe..208ad5e0f3 100644
--- a/src/printsupport/widgets/qprintpreviewwidget.cpp
+++ b/src/printsupport/widgets/qprintpreviewwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/printsupport/widgets/qprintpreviewwidget.h b/src/printsupport/widgets/qprintpreviewwidget.h
index 85ff77d975..ff648b03d0 100644
--- a/src/printsupport/widgets/qprintpreviewwidget.h
+++ b/src/printsupport/widgets/qprintpreviewwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtGui module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/doc/qtsql.qdocconf b/src/sql/doc/qtsql.qdocconf
index 7f37904039..b8632c5260 100644
--- a/src/sql/doc/qtsql.qdocconf
+++ b/src/sql/doc/qtsql.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtSql
 description             = Qt SQL Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = sql
diff --git a/src/sql/drivers/db2/qsql_db2.cpp b/src/sql/drivers/db2/qsql_db2.cpp
index 9fbe1ac6f8..09ac5bda46 100644
--- a/src/sql/drivers/db2/qsql_db2.cpp
+++ b/src/sql/drivers/db2/qsql_db2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,7 +66,7 @@ static const SQLSMALLINT qParamType[4] = { SQL_PARAM_INPUT, SQL_PARAM_INPUT, SQL
 class QDB2DriverPrivate : public QSqlDriverPrivate
 {
 public:
-    QDB2DriverPrivate() : QSqlDriverPrivate(), hEnv(0), hDbc(0) { dbmsType = DB2; }
+    QDB2DriverPrivate() : QSqlDriverPrivate(), hEnv(0), hDbc(0) { dbmsType = QSqlDriver::DB2; }
     SQLHANDLE hEnv;
     SQLHANDLE hDbc;
     QString user;
diff --git a/src/sql/drivers/db2/qsql_db2_p.h b/src/sql/drivers/db2/qsql_db2_p.h
index 89b07c9c83..3e0ade0d85 100644
--- a/src/sql/drivers/db2/qsql_db2_p.h
+++ b/src/sql/drivers/db2/qsql_db2_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/ibase/qsql_ibase.cpp b/src/sql/drivers/ibase/qsql_ibase.cpp
index c751fea825..bb3ffe619e 100644
--- a/src/sql/drivers/ibase/qsql_ibase.cpp
+++ b/src/sql/drivers/ibase/qsql_ibase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -314,7 +306,7 @@ class QIBaseDriverPrivate : public QSqlDriverPrivate
 {
     Q_DECLARE_PUBLIC(QIBaseDriver)
 public:
-    QIBaseDriverPrivate() : QSqlDriverPrivate(), ibase(0), trans(0), tc(0) { dbmsType = Interbase; }
+    QIBaseDriverPrivate() : QSqlDriverPrivate(), ibase(0), trans(0), tc(0) { dbmsType = QSqlDriver::Interbase; }
 
     bool isError(const char *msg, QSqlError::ErrorType typ = QSqlError::UnknownError)
     {
diff --git a/src/sql/drivers/ibase/qsql_ibase_p.h b/src/sql/drivers/ibase/qsql_ibase_p.h
index ab9edfd1a5..1196cec53f 100644
--- a/src/sql/drivers/ibase/qsql_ibase_p.h
+++ b/src/sql/drivers/ibase/qsql_ibase_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/mysql/qsql_mysql.cpp b/src/sql/drivers/mysql/qsql_mysql.cpp
index 1b1cb2ac91..db54ce84da 100644
--- a/src/sql/drivers/mysql/qsql_mysql.cpp
+++ b/src/sql/drivers/mysql/qsql_mysql.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -86,7 +78,7 @@ public:
 #else
         tc(0),
 #endif
-        preparedQuerysEnabled(false) { dbmsType = MySqlServer; }
+        preparedQuerysEnabled(false) { dbmsType = QSqlDriver::MySqlServer; }
     MYSQL *mysql;
     QTextCodec *tc;
 
diff --git a/src/sql/drivers/mysql/qsql_mysql_p.h b/src/sql/drivers/mysql/qsql_mysql_p.h
index a1be139b2a..601193f4b5 100644
--- a/src/sql/drivers/mysql/qsql_mysql_p.h
+++ b/src/sql/drivers/mysql/qsql_mysql_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/oci/qsql_oci.cpp b/src/sql/drivers/oci/qsql_oci.cpp
index 6843407e9c..284fee8ccb 100644
--- a/src/sql/drivers/oci/qsql_oci.cpp
+++ b/src/sql/drivers/oci/qsql_oci.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -516,7 +508,7 @@ QOCIDriverPrivate::QOCIDriverPrivate()
     : QSqlDriverPrivate(), env(0), svc(0), srvhp(0), authp(0), err(0), transaction(false),
       serverVersion(-1), prefetchRows(-1), prefetchMem(QOCI_PREFETCH_MEM)
 {
-    dbmsType = Oracle;
+    dbmsType = QSqlDriver::Oracle;
 }
 
 void QOCIDriverPrivate::allocErrorHandle()
diff --git a/src/sql/drivers/oci/qsql_oci_p.h b/src/sql/drivers/oci/qsql_oci_p.h
index c55a4209fa..d900e2f4b8 100644
--- a/src/sql/drivers/oci/qsql_oci_p.h
+++ b/src/sql/drivers/oci/qsql_oci_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/odbc/qsql_odbc.cpp b/src/sql/drivers/odbc/qsql_odbc.cpp
index 23eff8dbe3..f95fb8868e 100644
--- a/src/sql/drivers/odbc/qsql_odbc.cpp
+++ b/src/sql/drivers/odbc/qsql_odbc.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1668,14 +1660,14 @@ QVariant QODBCResult::lastInsertId() const
     QString sql;
 
     switch (d->driverPrivate->dbmsType) {
-    case QODBCDriverPrivate::MSSqlServer:
-    case QODBCDriverPrivate::Sybase:
+    case QSqlDriver::MSSqlServer:
+    case QSqlDriver::Sybase:
         sql = QLatin1String("SELECT @@IDENTITY;");
         break;
-    case QODBCDriverPrivate::MySqlServer:
+    case QSqlDriver::MySqlServer:
         sql = QLatin1String("SELECT LAST_INSERT_ID();");
         break;
-    case QODBCDriverPrivate::PostgreSQL:
+    case QSqlDriver::PostgreSQL:
         sql = QLatin1String("SELECT lastval();");
         break;
     default:
@@ -1815,14 +1807,14 @@ bool QODBCDriver::hasFeature(DriverFeature f) const
     case CancelQuery:
         return false;
     case LastInsertId:
-        return (d->dbmsType == QODBCDriverPrivate::MSSqlServer)
-                || (d->dbmsType == QODBCDriverPrivate::Sybase)
-                || (d->dbmsType == QODBCDriverPrivate::MySqlServer)
-                || (d->dbmsType == QODBCDriverPrivate::PostgreSQL);
+        return (d->dbmsType == MSSqlServer)
+                || (d->dbmsType == Sybase)
+                || (d->dbmsType == MySqlServer)
+                || (d->dbmsType == PostgreSQL);
     case MultipleResultSets:
         return d->hasMultiResultSets;
     case BLOB: {
-        if (d->dbmsType == QODBCDriverPrivate::MySqlServer)
+        if (d->dbmsType == MySqlServer)
             return true;
         else
             return false;
@@ -1919,7 +1911,7 @@ bool QODBCDriver::open(const QString & db,
     d->checkDateTimePrecision();
     setOpen(true);
     setOpenError(false);
-    if (d->dbmsType == QODBCDriverPrivate::MSSqlServer) {
+    if (d->dbmsType == MSSqlServer) {
         QSqlQuery i(createResult());
         i.exec(QLatin1String("SET QUOTED_IDENTIFIER ON"));
     }
@@ -2105,15 +2097,15 @@ void QODBCDriverPrivate::checkDBMS()
         serverType = QString::fromUtf8((const char *)serverString.constData(), t);
 #endif
         if (serverType.contains(QLatin1String("PostgreSQL"), Qt::CaseInsensitive))
-            dbmsType = PostgreSQL;
+            dbmsType = QSqlDriver::PostgreSQL;
         else if (serverType.contains(QLatin1String("Oracle"), Qt::CaseInsensitive))
-            dbmsType = Oracle;
+            dbmsType = QSqlDriver::Oracle;
         else if (serverType.contains(QLatin1String("MySql"), Qt::CaseInsensitive))
-            dbmsType = MySqlServer;
+            dbmsType = QSqlDriver::MySqlServer;
         else if (serverType.contains(QLatin1String("Microsoft SQL Server"), Qt::CaseInsensitive))
-            dbmsType = MSSqlServer;
+            dbmsType = QSqlDriver::MSSqlServer;
         else if (serverType.contains(QLatin1String("Sybase"), Qt::CaseInsensitive))
-            dbmsType = Sybase;
+            dbmsType = QSqlDriver::Sybase;
     }
     r = SQLGetInfo(hDbc,
                    SQL_DRIVER_NAME,
diff --git a/src/sql/drivers/odbc/qsql_odbc_p.h b/src/sql/drivers/odbc/qsql_odbc_p.h
index b18768a5a2..56aebcb92e 100644
--- a/src/sql/drivers/odbc/qsql_odbc_p.h
+++ b/src/sql/drivers/odbc/qsql_odbc_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/psql/qsql_psql.cpp b/src/sql/drivers/psql/qsql_psql.cpp
index 722595ad52..e76dcc26a0 100644
--- a/src/sql/drivers/psql/qsql_psql.cpp
+++ b/src/sql/drivers/psql/qsql_psql.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -138,7 +130,7 @@ public:
         sn(0),
         pendingNotifyCheck(false),
         hasBackslashEscape(false)
-    { dbmsType = PostgreSQL; }
+    { dbmsType = QSqlDriver::PostgreSQL; }
 
     PGconn *connection;
     bool isUtf8;
diff --git a/src/sql/drivers/psql/qsql_psql_p.h b/src/sql/drivers/psql/qsql_psql_p.h
index d5dbda4058..4d8283ff48 100644
--- a/src/sql/drivers/psql/qsql_psql_p.h
+++ b/src/sql/drivers/psql/qsql_psql_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/sqlite/qsql_sqlite.cpp b/src/sql/drivers/sqlite/qsql_sqlite.cpp
index 9e4ddab1b1..cbde2bfa9c 100644
--- a/src/sql/drivers/sqlite/qsql_sqlite.cpp
+++ b/src/sql/drivers/sqlite/qsql_sqlite.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -139,7 +131,7 @@ private:
 class QSQLiteDriverPrivate : public QSqlDriverPrivate
 {
 public:
-    inline QSQLiteDriverPrivate() : QSqlDriverPrivate(), access(0) { dbmsType = SQLite; }
+    inline QSQLiteDriverPrivate() : QSqlDriverPrivate(), access(0) { dbmsType = QSqlDriver::SQLite; }
     sqlite3 *access;
     QList <QSQLiteResult *> results;
 };
diff --git a/src/sql/drivers/sqlite/qsql_sqlite_p.h b/src/sql/drivers/sqlite/qsql_sqlite_p.h
index 526dd9a22a..45a5bd75ac 100644
--- a/src/sql/drivers/sqlite/qsql_sqlite_p.h
+++ b/src/sql/drivers/sqlite/qsql_sqlite_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/sqlite2/qsql_sqlite2.cpp b/src/sql/drivers/sqlite2/qsql_sqlite2.cpp
index 7e56d5cc17..760ece915f 100644
--- a/src/sql/drivers/sqlite2/qsql_sqlite2.cpp
+++ b/src/sql/drivers/sqlite2/qsql_sqlite2.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -94,7 +86,7 @@ public:
 QSQLite2DriverPrivate::QSQLite2DriverPrivate() : QSqlDriverPrivate(), access(0)
 {
     utf8 = (qstrcmp(sqlite_encoding, "UTF-8") == 0);
-    dbmsType = SQLite;
+    dbmsType = QSqlDriver::SQLite;
 }
 
 class QSQLite2ResultPrivate;
diff --git a/src/sql/drivers/sqlite2/qsql_sqlite2_p.h b/src/sql/drivers/sqlite2/qsql_sqlite2_p.h
index ae38a662ac..fa3102abda 100644
--- a/src/sql/drivers/sqlite2/qsql_sqlite2_p.h
+++ b/src/sql/drivers/sqlite2/qsql_sqlite2_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/drivers/tds/qsql_tds.cpp b/src/sql/drivers/tds/qsql_tds.cpp
index 69534fe380..5449930ae3 100644
--- a/src/sql/drivers/tds/qsql_tds.cpp
+++ b/src/sql/drivers/tds/qsql_tds.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -140,7 +132,7 @@ QSqlError qMakeError(const QString& err, QSqlError::ErrorType type, int errNo =
 class QTDSDriverPrivate : public QSqlDriverPrivate
 {
 public:
-    QTDSDriverPrivate() : QSqlDriverPrivate(), login(0), initialized(false) { dbmsType = Sybase; }
+    QTDSDriverPrivate() : QSqlDriverPrivate(), login(0), initialized(false) { dbmsType = QSqlDriver::Sybase; }
     LOGINREC* login;  // login information
     QString hostName;
     QString db;
diff --git a/src/sql/drivers/tds/qsql_tds_p.h b/src/sql/drivers/tds/qsql_tds_p.h
index dd7088a167..8dbea6fb15 100644
--- a/src/sql/drivers/tds/qsql_tds_p.h
+++ b/src/sql/drivers/tds/qsql_tds_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsql.h b/src/sql/kernel/qsql.h
index 9b9381f797..49377d4174 100644
--- a/src/sql/kernel/qsql.h
+++ b/src/sql/kernel/qsql.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlcachedresult.cpp b/src/sql/kernel/qsqlcachedresult.cpp
index 2ec7e4e20f..a700f788b9 100644
--- a/src/sql/kernel/qsqlcachedresult.cpp
+++ b/src/sql/kernel/qsqlcachedresult.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlcachedresult_p.h b/src/sql/kernel/qsqlcachedresult_p.h
index 76009469c9..387f951ecc 100644
--- a/src/sql/kernel/qsqlcachedresult_p.h
+++ b/src/sql/kernel/qsqlcachedresult_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqldatabase.cpp b/src/sql/kernel/qsqldatabase.cpp
index 84e01fce49..31f0e2dc9e 100644
--- a/src/sql/kernel/qsqldatabase.cpp
+++ b/src/sql/kernel/qsqldatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqldatabase.h b/src/sql/kernel/qsqldatabase.h
index ffc10cdd30..d5f381102e 100644
--- a/src/sql/kernel/qsqldatabase.h
+++ b/src/sql/kernel/qsqldatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqldriver.cpp b/src/sql/kernel/qsqldriver.cpp
index 3541841e87..736fe310e3 100644
--- a/src/sql/kernel/qsqldriver.cpp
+++ b/src/sql/kernel/qsqldriver.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -245,6 +237,22 @@ bool QSqlDriver::isOpenError() const
 */
 
 /*!
+    \enum QSqlDriver::DBMSType
+
+    This enum contains DBMS types.
+
+    \value UnknownDBMS
+    \value MSSqlServer
+    \value MySqlServer
+    \value PostgreSQL
+    \value Oracle
+    \value Sybase
+    \value SQLite
+    \value Interbase
+    \value DB2
+*/
+
+/*!
     \fn bool QSqlDriver::hasFeature(DriverFeature feature) const
 
     Returns \c true if the driver supports feature \a feature; otherwise
@@ -775,6 +783,16 @@ QSql::NumericalPrecisionPolicy QSqlDriver::numericalPrecisionPolicy() const
 }
 
 /*!
+    \since 5.4
+
+    Returns the current DBMS type for the database connection.
+*/
+QSqlDriver::DBMSType QSqlDriver::dbmsType() const
+{
+    return d_func()->dbmsType;
+}
+
+/*!
     \since 5.0
     \internal
 
diff --git a/src/sql/kernel/qsqldriver.h b/src/sql/kernel/qsqldriver.h
index f93a03063b..767c1ac74d 100644
--- a/src/sql/kernel/qsqldriver.h
+++ b/src/sql/kernel/qsqldriver.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -79,6 +71,18 @@ public:
 
     enum NotificationSource { UnknownSource, SelfSource, OtherSource };
 
+    enum DBMSType {
+        UnknownDBMS,
+        MSSqlServer,
+        MySqlServer,
+        PostgreSQL,
+        Oracle,
+        Sybase,
+        SQLite,
+        Interbase,
+        DB2
+    };
+
     explicit QSqlDriver(QObject *parent=0);
     ~QSqlDriver();
     virtual bool isOpen() const;
@@ -119,6 +123,8 @@ public:
     void setNumericalPrecisionPolicy(QSql::NumericalPrecisionPolicy precisionPolicy);
     QSql::NumericalPrecisionPolicy numericalPrecisionPolicy() const;
 
+    DBMSType dbmsType() const;
+
 public Q_SLOTS:
     virtual bool cancelQuery();
 
diff --git a/src/sql/kernel/qsqldriver_p.h b/src/sql/kernel/qsqldriver_p.h
index 05570e584c..427e3984fa 100644
--- a/src/sql/kernel/qsqldriver_p.h
+++ b/src/sql/kernel/qsqldriver_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,21 +56,19 @@ class QSqlDriverPrivate : public QObjectPrivate
     Q_DECLARE_PUBLIC(QSqlDriver)
 
 public:
-    enum DBMSType {UnknownDB, MSSqlServer, MySqlServer, PostgreSQL, Oracle, Sybase, SQLite, Interbase, DB2};
-
     QSqlDriverPrivate()
       : QObjectPrivate(),
         isOpen(false),
         isOpenError(false),
         precisionPolicy(QSql::LowPrecisionDouble),
-        dbmsType(UnknownDB)
+        dbmsType(QSqlDriver::UnknownDBMS)
     { }
 
     uint isOpen;
     uint isOpenError;
     QSqlError error;
     QSql::NumericalPrecisionPolicy precisionPolicy;
-    DBMSType dbmsType;
+    QSqlDriver::DBMSType dbmsType;
 };
 
 QT_END_NAMESPACE
diff --git a/src/sql/kernel/qsqldriverplugin.cpp b/src/sql/kernel/qsqldriverplugin.cpp
index 2cd220ab0b..f8dee1bce6 100644
--- a/src/sql/kernel/qsqldriverplugin.cpp
+++ b/src/sql/kernel/qsqldriverplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqldriverplugin.h b/src/sql/kernel/qsqldriverplugin.h
index ca2e0f2474..f1b47efe95 100644
--- a/src/sql/kernel/qsqldriverplugin.h
+++ b/src/sql/kernel/qsqldriverplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlerror.cpp b/src/sql/kernel/qsqlerror.cpp
index 1979e5d1f5..b80b471dfc 100644
--- a/src/sql/kernel/qsqlerror.cpp
+++ b/src/sql/kernel/qsqlerror.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlerror.h b/src/sql/kernel/qsqlerror.h
index 679e0f9e3c..7330550581 100644
--- a/src/sql/kernel/qsqlerror.h
+++ b/src/sql/kernel/qsqlerror.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlfield.cpp b/src/sql/kernel/qsqlfield.cpp
index c3c80cad61..dfd4712071 100644
--- a/src/sql/kernel/qsqlfield.cpp
+++ b/src/sql/kernel/qsqlfield.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlfield.h b/src/sql/kernel/qsqlfield.h
index a642721039..691949f070 100644
--- a/src/sql/kernel/qsqlfield.h
+++ b/src/sql/kernel/qsqlfield.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlindex.cpp b/src/sql/kernel/qsqlindex.cpp
index 4b8ec442e6..b2e201d7f7 100644
--- a/src/sql/kernel/qsqlindex.cpp
+++ b/src/sql/kernel/qsqlindex.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlindex.h b/src/sql/kernel/qsqlindex.h
index 96c2f614f1..431690a25c 100644
--- a/src/sql/kernel/qsqlindex.h
+++ b/src/sql/kernel/qsqlindex.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlnulldriver_p.h b/src/sql/kernel/qsqlnulldriver_p.h
index 2bf8931227..c904917f66 100644
--- a/src/sql/kernel/qsqlnulldriver_p.h
+++ b/src/sql/kernel/qsqlnulldriver_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlquery.cpp b/src/sql/kernel/qsqlquery.cpp
index b98e2baf1e..98e262a7e2 100644
--- a/src/sql/kernel/qsqlquery.cpp
+++ b/src/sql/kernel/qsqlquery.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -43,6 +35,8 @@
 
 //#define QT_DEBUG_SQL
 
+#include "qdebug.h"
+#include "qelapsedtimer.h"
 #include "qatomic.h"
 #include "qsqlrecord.h"
 #include "qsqlresult.h"
@@ -370,6 +364,10 @@ bool QSqlQuery::isNull(const QString &name) const
 
 bool QSqlQuery::exec(const QString& query)
 {
+#ifdef QT_DEBUG_SQL
+    QElapsedTimer t;
+    t.start();
+#endif
     if (d->ref.load() != 1) {
         bool fo = isForwardOnly();
         *this = QSqlQuery(driver()->createResult());
@@ -391,10 +389,14 @@ bool QSqlQuery::exec(const QString& query)
         qWarning("QSqlQuery::exec: empty query");
         return false;
     }
+
+    bool retval = d->sqlResult->reset(query);
 #ifdef QT_DEBUG_SQL
-    qDebug("\n QSqlQuery: %s", query.toLocal8Bit().constData());
+    qDebug().nospace() << "Executed query (" << t.elapsed() << "ms, " << d->sqlResult->size()
+                       << " results, " << d->sqlResult->numRowsAffected()
+                       << " affected): " << d->sqlResult->lastQuery();
 #endif
-    return d->sqlResult->reset(query);
+    return retval;
 }
 
 /*!
@@ -989,12 +991,22 @@ bool QSqlQuery::prepare(const QString& query)
 */
 bool QSqlQuery::exec()
 {
+#ifdef QT_DEBUG_SQL
+    QElapsedTimer t;
+    t.start();
+#endif
     d->sqlResult->resetBindCount();
 
     if (d->sqlResult->lastError().isValid())
         d->sqlResult->setLastError(QSqlError());
 
-    return d->sqlResult->exec();
+    bool retval = d->sqlResult->exec();
+#ifdef QT_DEBUG_SQL
+    qDebug().nospace() << "Executed prepared query (" << t.elapsed() << "ms, "
+                       << d->sqlResult->size() << " results, " << d->sqlResult->numRowsAffected()
+                       << " affected): " << d->sqlResult->lastQuery();
+#endif
+    return retval;
 }
 
 /*! \enum QSqlQuery::BatchExecutionMode
diff --git a/src/sql/kernel/qsqlquery.h b/src/sql/kernel/qsqlquery.h
index ef48b91298..2de5bb7503 100644
--- a/src/sql/kernel/qsqlquery.h
+++ b/src/sql/kernel/qsqlquery.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlrecord.cpp b/src/sql/kernel/qsqlrecord.cpp
index b01c20bd1a..7fd64d1307 100644
--- a/src/sql/kernel/qsqlrecord.cpp
+++ b/src/sql/kernel/qsqlrecord.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlrecord.h b/src/sql/kernel/qsqlrecord.h
index 7799b96588..da4f0ef298 100644
--- a/src/sql/kernel/qsqlrecord.h
+++ b/src/sql/kernel/qsqlrecord.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlresult.cpp b/src/sql/kernel/qsqlresult.cpp
index f933e6eeb1..4cd4e6fec4 100644
--- a/src/sql/kernel/qsqlresult.cpp
+++ b/src/sql/kernel/qsqlresult.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -95,7 +87,7 @@ QString QSqlResultPrivate::positionalToNamedBinding(const QString &query) const
     result.reserve(n * 5 / 4);
     QChar closingQuote;
     int count = 0;
-    bool ignoreBraces = (sqldriver->d_func()->dbmsType == QSqlDriverPrivate::PostgreSQL);
+    bool ignoreBraces = (sqldriver->d_func()->dbmsType == QSqlDriver::PostgreSQL);
 
     for (int i = 0; i < n; ++i) {
         QChar ch = query.at(i);
@@ -136,7 +128,7 @@ QString QSqlResultPrivate::namedToPositionalBinding(const QString &query)
     QChar closingQuote;
     int count = 0;
     int i = 0;
-    bool ignoreBraces = (sqldriver->d_func()->dbmsType == QSqlDriverPrivate::PostgreSQL);
+    bool ignoreBraces = (sqldriver->d_func()->dbmsType == QSqlDriver::PostgreSQL);
 
     while (i < n) {
         QChar ch = query.at(i);
diff --git a/src/sql/kernel/qsqlresult.h b/src/sql/kernel/qsqlresult.h
index 05f3d7ffec..050ebeb620 100644
--- a/src/sql/kernel/qsqlresult.h
+++ b/src/sql/kernel/qsqlresult.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/kernel/qsqlresult_p.h b/src/sql/kernel/qsqlresult_p.h
index 7f0459f3a8..02373e22ce 100644
--- a/src/sql/kernel/qsqlresult_p.h
+++ b/src/sql/kernel/qsqlresult_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlquerymodel.cpp b/src/sql/models/qsqlquerymodel.cpp
index 4bee8fe326..c9eb42d66c 100644
--- a/src/sql/models/qsqlquerymodel.cpp
+++ b/src/sql/models/qsqlquerymodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlquerymodel.h b/src/sql/models/qsqlquerymodel.h
index c00d905ec0..95910513df 100644
--- a/src/sql/models/qsqlquerymodel.h
+++ b/src/sql/models/qsqlquerymodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlquerymodel_p.h b/src/sql/models/qsqlquerymodel_p.h
index 9d7b71faec..b8f61bb236 100644
--- a/src/sql/models/qsqlquerymodel_p.h
+++ b/src/sql/models/qsqlquerymodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlrelationaldelegate.cpp b/src/sql/models/qsqlrelationaldelegate.cpp
index b31c47de0c..70ea30ebc3 100644
--- a/src/sql/models/qsqlrelationaldelegate.cpp
+++ b/src/sql/models/qsqlrelationaldelegate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlrelationaldelegate.h b/src/sql/models/qsqlrelationaldelegate.h
index b878280bca..0fba4617fa 100644
--- a/src/sql/models/qsqlrelationaldelegate.h
+++ b/src/sql/models/qsqlrelationaldelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlrelationaltablemodel.cpp b/src/sql/models/qsqlrelationaltablemodel.cpp
index 2214e73658..8f89f27cde 100644
--- a/src/sql/models/qsqlrelationaltablemodel.cpp
+++ b/src/sql/models/qsqlrelationaltablemodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqlrelationaltablemodel.h b/src/sql/models/qsqlrelationaltablemodel.h
index 0ccfecd1c7..8a9ab43443 100644
--- a/src/sql/models/qsqlrelationaltablemodel.h
+++ b/src/sql/models/qsqlrelationaltablemodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqltablemodel.cpp b/src/sql/models/qsqltablemodel.cpp
index 0eed6ea4d3..e0e700cd01 100644
--- a/src/sql/models/qsqltablemodel.cpp
+++ b/src/sql/models/qsqltablemodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -931,7 +923,7 @@ void QSqlTableModel::setPrimaryKey(const QSqlIndex &key)
 }
 
 /*!
-    Returns a pointer to the used QSqlDatabase or 0 if no database was set.
+    Returns the model's database connection.
 */
 QSqlDatabase QSqlTableModel::database() const
 {
diff --git a/src/sql/models/qsqltablemodel.h b/src/sql/models/qsqltablemodel.h
index 1a4ce9b914..4263d387ea 100644
--- a/src/sql/models/qsqltablemodel.h
+++ b/src/sql/models/qsqltablemodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/sql/models/qsqltablemodel_p.h b/src/sql/models/qsqltablemodel_p.h
index c02399166a..f596639406 100644
--- a/src/sql/models/qsqltablemodel_p.h
+++ b/src/sql/models/qsqltablemodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtSql module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/src.pro b/src/src.pro
index 6a805a6a06..ab93641131 100644
--- a/src/src.pro
+++ b/src/src.pro
@@ -85,15 +85,18 @@ src_3rdparty_harfbuzzng.target = sub-3rdparty-harfbuzzng
 
 src_angle.subdir = $$PWD/angle
 src_angle.target = sub-angle
-angle_d3d11: src_angle.depends = src_corelib
 
 src_gui.subdir = $$PWD/gui
 src_gui.target = sub-gui
 src_gui.depends = src_corelib
 
+src_platformheaders.subdir = $$PWD/platformheaders
+src_platformheaders.target = sub-platformheaders
+src_platformheaders.depends = src_corelib src_gui
+
 src_platformsupport.subdir = $$PWD/platformsupport
 src_platformsupport.target = sub-platformsupport
-src_platformsupport.depends = src_corelib src_gui src_network
+src_platformsupport.depends = src_corelib src_gui src_network src_platformheaders
 
 src_widgets.subdir = $$PWD/widgets
 src_widgets.target = sub-widgets
@@ -141,14 +144,14 @@ contains(QT_CONFIG, concurrent):SUBDIRS += src_concurrent
         SUBDIRS += src_angle
         src_gui.depends += src_angle
     }
-    SUBDIRS += src_gui src_platformsupport
+    SUBDIRS += src_gui src_platformsupport src_platformheaders
     contains(QT_CONFIG, opengl(es2)?):SUBDIRS += src_openglextensions
-    src_plugins.depends += src_gui src_platformsupport
+    src_plugins.depends += src_gui src_platformsupport src_platformheaders
     !contains(QT_CONFIG, no-widgets) {
         SUBDIRS += src_tools_uic src_widgets
         TOOLS += src_tools_uic
         src_plugins.depends += src_widgets
-        contains(QT_CONFIG, opengl(es2)?):!contains(QT_CONFIG, dynamicgl) {
+        contains(QT_CONFIG, opengl(es2)?) {
             SUBDIRS += src_opengl
             src_plugins.depends += src_opengl
         }
diff --git a/src/testlib/doc/qttestlib.qdocconf b/src/testlib/doc/qttestlib.qdocconf
index 92e5c97aab..35b4fbcb7b 100644
--- a/src/testlib/doc/qttestlib.qdocconf
+++ b/src/testlib/doc/qttestlib.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtTestLib
 description             = Qt Test Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = testlib
diff --git a/src/testlib/doc/snippets/code/doc_src_qsignalspy.cpp b/src/testlib/doc/snippets/code/doc_src_qsignalspy.cpp
index e4702c6e0b..0856de9450 100644
--- a/src/testlib/doc/snippets/code/doc_src_qsignalspy.cpp
+++ b/src/testlib/doc/snippets/code/doc_src_qsignalspy.cpp
@@ -83,3 +83,8 @@ QSignalSpy spy(myPushButton, SIGNAL(clicked(bool)));
 //! [5]
 QVERIFY(spy.wait(1000));
 //! [5]
+
+//! [6]
+QSignalSpy spy(myPushButton, &QPushButton::clicked);
+//! [6]
+
diff --git a/src/testlib/doc/src/qttestlib-manual.qdoc b/src/testlib/doc/src/qttestlib-manual.qdoc
index 4125e63ddc..89cf1c19d9 100644
--- a/src/testlib/doc/src/qttestlib-manual.qdoc
+++ b/src/testlib/doc/src/qttestlib-manual.qdoc
@@ -672,7 +672,7 @@
 
     In this chapter we will see how to write a simple GUI test.
 
-    \section1 Writing a GUI test
+    \section1 Writing a GUI Test
 
     This time, let's assume you want to test the behavior of our
     QLineEdit class. As before, you will need a class that contains
diff --git a/src/testlib/qabstracttestlogger.cpp b/src/testlib/qabstracttestlogger.cpp
index 41f8f37872..292b595e98 100644
--- a/src/testlib/qabstracttestlogger.cpp
+++ b/src/testlib/qabstracttestlogger.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qabstracttestlogger_p.h b/src/testlib/qabstracttestlogger_p.h
index c549233ddb..894f4fc9d8 100644
--- a/src/testlib/qabstracttestlogger_p.h
+++ b/src/testlib/qabstracttestlogger_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,7 +60,9 @@ public:
         Pass,
         XFail,
         Fail,
-        XPass
+        XPass,
+        BlacklistedPass,
+        BlacklistedFail
     };
 
     enum MessageTypes {
diff --git a/src/testlib/qasciikey.cpp b/src/testlib/qasciikey.cpp
index cae3b33b00..cdff561021 100644
--- a/src/testlib/qasciikey.cpp
+++ b/src/testlib/qasciikey.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmark.cpp b/src/testlib/qbenchmark.cpp
index 3ef29e19ce..1b4058085e 100644
--- a/src/testlib/qbenchmark.cpp
+++ b/src/testlib/qbenchmark.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmark.h b/src/testlib/qbenchmark.h
index ea5023c095..de4f9a1f2a 100644
--- a/src/testlib/qbenchmark.h
+++ b/src/testlib/qbenchmark.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmark_p.h b/src/testlib/qbenchmark_p.h
index 351287b103..889798e862 100644
--- a/src/testlib/qbenchmark_p.h
+++ b/src/testlib/qbenchmark_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkevent.cpp b/src/testlib/qbenchmarkevent.cpp
index 6120eed77f..aae88c4fb3 100644
--- a/src/testlib/qbenchmarkevent.cpp
+++ b/src/testlib/qbenchmarkevent.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkevent_p.h b/src/testlib/qbenchmarkevent_p.h
index 2f61e30bdc..b607455cbd 100644
--- a/src/testlib/qbenchmarkevent_p.h
+++ b/src/testlib/qbenchmarkevent_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkmeasurement.cpp b/src/testlib/qbenchmarkmeasurement.cpp
index d125047f53..1f4a8d507b 100644
--- a/src/testlib/qbenchmarkmeasurement.cpp
+++ b/src/testlib/qbenchmarkmeasurement.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkmeasurement_p.h b/src/testlib/qbenchmarkmeasurement_p.h
index b86783d497..a868ffcfeb 100644
--- a/src/testlib/qbenchmarkmeasurement_p.h
+++ b/src/testlib/qbenchmarkmeasurement_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkmetric.cpp b/src/testlib/qbenchmarkmetric.cpp
index 727b9fb912..088cfbef6d 100644
--- a/src/testlib/qbenchmarkmetric.cpp
+++ b/src/testlib/qbenchmarkmetric.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkmetric.h b/src/testlib/qbenchmarkmetric.h
index 448df3f691..4a08dad3d6 100644
--- a/src/testlib/qbenchmarkmetric.h
+++ b/src/testlib/qbenchmarkmetric.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkmetric_p.h b/src/testlib/qbenchmarkmetric_p.h
index 0af2ed2d1a..a475698e77 100644
--- a/src/testlib/qbenchmarkmetric_p.h
+++ b/src/testlib/qbenchmarkmetric_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkperfevents.cpp b/src/testlib/qbenchmarkperfevents.cpp
index 30a0d3ea9c..5336cac1e4 100644
--- a/src/testlib/qbenchmarkperfevents.cpp
+++ b/src/testlib/qbenchmarkperfevents.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkperfevents_p.h b/src/testlib/qbenchmarkperfevents_p.h
index f73d140300..2a571cf6a9 100644
--- a/src/testlib/qbenchmarkperfevents_p.h
+++ b/src/testlib/qbenchmarkperfevents_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qbenchmarkvalgrind.cpp b/src/testlib/qbenchmarkvalgrind.cpp
index 545de3bb65..c480753675 100644
--- a/src/testlib/qbenchmarkvalgrind.cpp
+++ b/src/testlib/qbenchmarkvalgrind.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,7 +58,7 @@ bool QBenchmarkValgrindUtils::haveValgrind()
     if (!process.waitForFinished(-1))
         return false;
     const QByteArray out = process.readAllStandardOutput();
-    QRegExp rx(QLatin1String("^valgrind-([0-9]).([0-9]).[0-9]"));
+    QRegExp rx(QLatin1String("^valgrind-([0-9]+).([0-9]+).[0-9]+"));
     if (rx.indexIn(QLatin1String(out.data())) == -1)
         return false;
     bool ok;
diff --git a/src/testlib/qbenchmarkvalgrind_p.h b/src/testlib/qbenchmarkvalgrind_p.h
index 4aef0358da..9fb4f4f8be 100644
--- a/src/testlib/qbenchmarkvalgrind_p.h
+++ b/src/testlib/qbenchmarkvalgrind_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qcsvbenchmarklogger.cpp b/src/testlib/qcsvbenchmarklogger.cpp
index ae5c3183dc..378bbb2ea2 100644
--- a/src/testlib/qcsvbenchmarklogger.cpp
+++ b/src/testlib/qcsvbenchmarklogger.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qcsvbenchmarklogger_p.h b/src/testlib/qcsvbenchmarklogger_p.h
index 89692de972..6da1dcd807 100644
--- a/src/testlib/qcsvbenchmarklogger_p.h
+++ b/src/testlib/qcsvbenchmarklogger_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qplaintestlogger.cpp b/src/testlib/qplaintestlogger.cpp
index 39580f22d4..e58daa528d 100644
--- a/src/testlib/qplaintestlogger.cpp
+++ b/src/testlib/qplaintestlogger.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,21 +43,29 @@
 #include <stdlib.h>
 #include <string.h>
 
-#ifdef Q_OS_WIN
-#include <windows.h>
-#endif
-
 #ifdef Q_OS_WINCE
 #include <QtCore/QString>
 #endif
 
+#ifdef min // windows.h without NOMINMAX is included by the benchmark headers.
+#  undef min
+#endif
+#ifdef max
+#  undef max
+#endif
+
 #include <QtCore/QByteArray>
 #include <QtCore/qmath.h>
+#include <QtCore/QLibraryInfo>
 
 #ifdef Q_OS_ANDROID
 #  include <android/log.h>
 #endif
 
+#ifdef Q_OS_WIN
+#  include <qt_windows.h>
+#endif
+
 QT_BEGIN_NAMESPACE
 
 namespace QTest {
@@ -81,6 +81,10 @@ namespace QTest {
             return "FAIL!  ";
         case QAbstractTestLogger::XPass:
             return "XPASS  ";
+        case QAbstractTestLogger::BlacklistedPass:
+            return "BPASS  ";
+        case QAbstractTestLogger::BlacklistedFail:
+            return "BFAIL  ";
         }
         return "??????";
     }
@@ -198,7 +202,7 @@ namespace QTest {
 }
 
 #if defined(Q_OS_WIN)
-Q_CORE_EXPORT bool qWinLogToStderr(); // defined in qlogging.cpp
+Q_CORE_EXPORT bool qt_logging_to_console(); // defined in qlogging.cpp
 #endif
 
 void QPlainTestLogger::outputMessage(const char *str)
@@ -214,7 +218,7 @@ void QPlainTestLogger::outputMessage(const char *str)
     if (stream != stdout)
 #elif defined(Q_OS_WIN)
     // log to system log only if output is not redirected, and no console is attached
-    if (!qWinLogToStderr() && stream == stdout) {
+    if (!qt_logging_to_console() && stream == stdout) {
         OutputDebugStringA(str);
         return;
     }
@@ -334,7 +338,7 @@ void QPlainTestLogger::startLogging()
         qsnprintf(buf, sizeof(buf),
                   "********* Start testing of %s *********\n"
                   "Config: Using QtTest library " QTEST_VERSION_STR
-                  ", Qt %s\n", QTestResult::currentTestObjectName(), qVersion());
+                  ", %s\n", QTestResult::currentTestObjectName(), QLibraryInfo::build());
     }
     outputMessage(buf);
 }
@@ -343,15 +347,16 @@ void QPlainTestLogger::stopLogging()
 {
     char buf[1024];
     if (QTestLog::verboseLevel() < 0) {
-        qsnprintf(buf, sizeof(buf), "Totals: %d passed, %d failed, %d skipped\n",
+        qsnprintf(buf, sizeof(buf), "Totals: %d passed, %d failed, %d skipped, %d blacklisted\n",
                   QTestLog::passCount(), QTestLog::failCount(),
-                  QTestLog::skipCount());
+                  QTestLog::skipCount(), QTestLog::blacklistCount());
     } else {
         qsnprintf(buf, sizeof(buf),
-                  "Totals: %d passed, %d failed, %d skipped\n"
+                  "Totals: %d passed, %d failed, %d skipped, %d blacklisted\n"
                   "********* Finished testing of %s *********\n",
                   QTestLog::passCount(), QTestLog::failCount(),
-                  QTestLog::skipCount(), QTestResult::currentTestObjectName());
+                  QTestLog::skipCount(), QTestLog::blacklistCount(),
+                  QTestResult::currentTestObjectName());
     }
     outputMessage(buf);
 
diff --git a/src/testlib/qplaintestlogger_p.h b/src/testlib/qplaintestlogger_p.h
index 69dbc89649..734dabe718 100644
--- a/src/testlib/qplaintestlogger_p.h
+++ b/src/testlib/qplaintestlogger_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qsignaldumper.cpp b/src/testlib/qsignaldumper.cpp
index 6d46c24d28..9b6148186a 100644
--- a/src/testlib/qsignaldumper.cpp
+++ b/src/testlib/qsignaldumper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qsignaldumper_p.h b/src/testlib/qsignaldumper_p.h
index 11b19a3247..91b1b1e0e0 100644
--- a/src/testlib/qsignaldumper_p.h
+++ b/src/testlib/qsignaldumper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qsignalspy.h b/src/testlib/qsignalspy.h
index 72a5df1ed9..65a5ca817c 100644
--- a/src/testlib/qsignalspy.h
+++ b/src/testlib/qsignalspy.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -98,6 +90,48 @@ public:
         initArgs(mo->method(sigIndex), obj);
     }
 
+#ifdef Q_QDOC
+    QSignalSpy(const QObject *object, PointerToMemberFunction signal);
+#else
+    template <typename Func>
+    QSignalSpy(const typename QtPrivate::FunctionPointer<Func>::Object *obj, Func signal0)
+        : m_waiting(false)
+    {
+#ifdef Q_CC_BOR
+        const int memberOffset = QObject::staticMetaObject.methodCount();
+#else
+        static const int memberOffset = QObject::staticMetaObject.methodCount();
+#endif
+        if (!obj) {
+            qWarning("QSignalSpy: Cannot spy on a null object");
+            return;
+        }
+
+        if (!signal0) {
+            qWarning("QSignalSpy: Null signal name is not valid");
+            return;
+        }
+
+        const QMetaObject * const mo = obj->metaObject();
+        const QMetaMethod signalMetaMethod = QMetaMethod::fromSignal(signal0);
+        const int sigIndex = signalMetaMethod.methodIndex();
+        if (!signalMetaMethod.isValid() ||
+            signalMetaMethod.methodType() != QMetaMethod::Signal) {
+            qWarning("QSignalSpy: Not a valid signal: '%s'",
+                     signalMetaMethod.methodSignature().constData());
+            return;
+        }
+
+        if (!QMetaObject::connect(obj, sigIndex, this, memberOffset,
+                    Qt::DirectConnection, 0)) {
+            qWarning("QSignalSpy: QMetaObject::connect returned false. Unable to connect.");
+            return;
+        }
+        sig = signalMetaMethod.methodSignature();
+        initArgs(mo->method(sigIndex), obj);
+    }
+#endif // Q_QDOC
+
     inline bool isValid() const { return !sig.isEmpty(); }
     inline QByteArray signal() const { return sig; }
 
@@ -127,17 +161,11 @@ public:
     }
 
 private:
-    void initArgs(const QMetaMethod &member)
-    {
-        initArgs(member, 0);
-    }
-
     void initArgs(const QMetaMethod &member, const QObject *obj)
     {
-        const QList<QByteArray> params = member.parameterTypes();
-        args.reserve(params.size());
-        for (int i = 0; i < params.count(); ++i) {
-            int tp = QMetaType::type(params.at(i).constData());
+        args.reserve(member.parameterCount());
+        for (int i = 0; i < member.parameterCount(); ++i) {
+            int tp = member.parameterType(i);
             if (tp == QMetaType::UnknownType && obj) {
                 void *argv[] = { &tp, &i };
                 QMetaObject::metacall(const_cast<QObject*>(obj),
@@ -147,9 +175,8 @@ private:
                     tp = QMetaType::UnknownType;
             }
             if (tp == QMetaType::UnknownType) {
-                Q_ASSERT(tp != QMetaType::Void); // void parameter => metaobject is corrupt
                 qWarning("Don't know how to handle '%s', use qRegisterMetaType to register it.",
-                         params.at(i).constData());
+                         member.parameterNames().at(i).constData());
             }
             args << tp;
         }
diff --git a/src/testlib/qsignalspy.qdoc b/src/testlib/qsignalspy.qdoc
index 9559090e8f..31cdeaba6a 100644
--- a/src/testlib/qsignalspy.qdoc
+++ b/src/testlib/qsignalspy.qdoc
@@ -72,6 +72,20 @@
     \snippet code/doc_src_qsignalspy.cpp 4
 */
 
+/*! \fn QSignalSpy::QSignalSpy(const QObject *object, PointerToMemberFunction signal)
+    \since 5.4
+
+    Constructs a new QSignalSpy that listens for emissions of the \a signal
+    from the QObject \a object. If QSignalSpy is not able to listen for a
+    valid signal (for example, because \a object is null or \a signal does
+    not denote a valid signal of \a object), an explanatory warning message
+    will be output using qWarning() and subsequent calls to \c isValid() will
+    return false.
+
+    Example:
+    \snippet code/doc_src_qsignalspy.cpp 6
+*/
+
 /*! \fn QSignalSpy::isValid() const
 
     Returns \c true if the signal spy listens to a valid signal, otherwise false.
diff --git a/src/testlib/qtest.h b/src/testlib/qtest.h
index 7d2f3cea72..d3443e7390 100644
--- a/src/testlib/qtest.h
+++ b/src/testlib/qtest.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,6 +46,7 @@
 #include <QtCore/qobject.h>
 #include <QtCore/qvariant.h>
 #include <QtCore/qurl.h>
+#include <QtCore/qversionnumber.h>
 
 #include <QtCore/qpoint.h>
 #include <QtCore/qsize.h>
@@ -171,6 +164,11 @@ template<> inline char *toString(const QVariant &v)
     return qstrdup(vstring.constData());
 }
 
+template<> inline char *toString(const QVersionNumber &version)
+{
+    return toString(version.toString());
+}
+
 template<>
 inline bool qCompare(QString const &t1, QLatin1String const &t2, const char *actual,
                     const char *expected, const char *file, int line)
diff --git a/src/testlib/qtest_global.h b/src/testlib/qtest_global.h
index ac5a0b23f5..7bf7dbfc76 100644
--- a/src/testlib/qtest_global.h
+++ b/src/testlib/qtest_global.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtest_gui.h b/src/testlib/qtest_gui.h
index 7c68b0fd77..60b3d29c21 100644
--- a/src/testlib/qtest_gui.h
+++ b/src/testlib/qtest_gui.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtest_widgets.h b/src/testlib/qtest_widgets.h
index 1161b84edc..f188e60b16 100644
--- a/src/testlib/qtest_widgets.h
+++ b/src/testlib/qtest_widgets.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestaccessible.h b/src/testlib/qtestaccessible.h
index ef6f61bd82..fc5b0ce53b 100644
--- a/src/testlib/qtestaccessible.h
+++ b/src/testlib/qtestaccessible.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -194,42 +186,75 @@ private:
     {
         QAccessibleEvent *ev;
         if (event->type() == QAccessible::StateChanged) {
-            ev = new QAccessibleStateChangeEvent(event->object(),
+            if (event->object())
+                ev = new QAccessibleStateChangeEvent(event->object(),
+                        static_cast<QAccessibleStateChangeEvent*>(event)->changedStates());
+            else
+                ev = new QAccessibleStateChangeEvent(event->accessibleInterface(),
                         static_cast<QAccessibleStateChangeEvent*>(event)->changedStates());
         } else if (event->type() == QAccessible::TextCaretMoved) {
-            ev =  new QAccessibleTextCursorEvent(event->object(), static_cast<QAccessibleTextCursorEvent*>(event)->cursorPosition());
+            if (event->object())
+                ev = new QAccessibleTextCursorEvent(event->object(), static_cast<QAccessibleTextCursorEvent*>(event)->cursorPosition());
+            else
+                ev = new QAccessibleTextCursorEvent(event->accessibleInterface(), static_cast<QAccessibleTextCursorEvent*>(event)->cursorPosition());
         } else if (event->type() == QAccessible::TextSelectionChanged) {
             const QAccessibleTextSelectionEvent *original = static_cast<QAccessibleTextSelectionEvent*>(event);
-            QAccessibleTextSelectionEvent *sel = new QAccessibleTextSelectionEvent(event->object(), original->selectionStart(), original->selectionEnd());
+            QAccessibleTextSelectionEvent *sel;
+            if (event->object())
+                sel = new QAccessibleTextSelectionEvent(event->object(), original->selectionStart(), original->selectionEnd());
+            else
+                sel = new QAccessibleTextSelectionEvent(event->accessibleInterface(), original->selectionStart(), original->selectionEnd());
             sel->setCursorPosition(original->cursorPosition());
             ev = sel;
         } else if (event->type() == QAccessible::TextInserted) {
             const QAccessibleTextInsertEvent *original = static_cast<QAccessibleTextInsertEvent*>(event);
-            QAccessibleTextInsertEvent *ins = new QAccessibleTextInsertEvent(event->object(), original->changePosition(), original->textInserted());
+            QAccessibleTextInsertEvent *ins;
+            if (original->object())
+                ins = new QAccessibleTextInsertEvent(event->object(), original->changePosition(), original->textInserted());
+            else
+                ins = new QAccessibleTextInsertEvent(event->accessibleInterface(), original->changePosition(), original->textInserted());
             ins->setCursorPosition(original->cursorPosition());
             ev = ins;
         } else if (event->type() == QAccessible::TextRemoved) {
             const QAccessibleTextRemoveEvent *original = static_cast<QAccessibleTextRemoveEvent*>(event);
-            QAccessibleTextRemoveEvent *rem = new QAccessibleTextRemoveEvent(event->object(), original->changePosition(), original->textRemoved());
+            QAccessibleTextRemoveEvent *rem;
+            if (event->object())
+                rem = new QAccessibleTextRemoveEvent(event->object(), original->changePosition(), original->textRemoved());
+            else
+                rem = new QAccessibleTextRemoveEvent(event->accessibleInterface(), original->changePosition(), original->textRemoved());
             rem->setCursorPosition(original->cursorPosition());
             ev = rem;
         } else if (event->type() == QAccessible::TextUpdated) {
             const QAccessibleTextUpdateEvent *original = static_cast<QAccessibleTextUpdateEvent*>(event);
-            QAccessibleTextUpdateEvent *upd = new QAccessibleTextUpdateEvent(event->object(), original->changePosition(), original->textRemoved(), original->textInserted());
+            QAccessibleTextUpdateEvent *upd;
+            if (event->object())
+                upd = new QAccessibleTextUpdateEvent(event->object(), original->changePosition(), original->textRemoved(), original->textInserted());
+            else
+                upd = new QAccessibleTextUpdateEvent(event->accessibleInterface(), original->changePosition(), original->textRemoved(), original->textInserted());
             upd->setCursorPosition(original->cursorPosition());
             ev = upd;
         } else if (event->type() == QAccessible::ValueChanged) {
-            ev = new QAccessibleValueChangeEvent(event->object(), static_cast<QAccessibleValueChangeEvent*>(event)->value());
+            if (event->object())
+                ev = new QAccessibleValueChangeEvent(event->object(), static_cast<QAccessibleValueChangeEvent*>(event)->value());
+            else
+                ev = new QAccessibleValueChangeEvent(event->accessibleInterface(), static_cast<QAccessibleValueChangeEvent*>(event)->value());
         } else if (event->type() == QAccessible::TableModelChanged) {
             QAccessibleTableModelChangeEvent *oldEvent = static_cast<QAccessibleTableModelChangeEvent*>(event);
-            QAccessibleTableModelChangeEvent *newEvent = new QAccessibleTableModelChangeEvent(event->object(), oldEvent->modelChangeType());
+            QAccessibleTableModelChangeEvent *newEvent;
+            if (event->object())
+                newEvent = new QAccessibleTableModelChangeEvent(event->object(), oldEvent->modelChangeType());
+            else
+                newEvent = new QAccessibleTableModelChangeEvent(event->accessibleInterface(), oldEvent->modelChangeType());
             newEvent->setFirstRow(oldEvent->firstRow());
             newEvent->setFirstColumn(oldEvent->firstColumn());
             newEvent->setLastRow(oldEvent->lastRow());
             newEvent->setLastColumn(oldEvent->lastColumn());
             ev = newEvent;
         } else {
-            ev = new QAccessibleEvent(event->object(), event->type());
+            if (event->object())
+                ev = new QAccessibleEvent(event->object(), event->type());
+            else
+                ev = new QAccessibleEvent(event->accessibleInterface(), event->type());
         }
         ev->setChild(event->child());
         return ev;
diff --git a/src/testlib/qtestassert.h b/src/testlib/qtestassert.h
index c6942534c5..f92759a0d6 100644
--- a/src/testlib/qtestassert.h
+++ b/src/testlib/qtestassert.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestblacklist.cpp b/src/testlib/qtestblacklist.cpp
new file mode 100644
index 0000000000..69f8ae4ca5
--- /dev/null
+++ b/src/testlib/qtestblacklist.cpp
@@ -0,0 +1,202 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtTest module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+#include "qtestblacklist_p.h"
+#include "qtestresult_p.h"
+
+#include <QtTest/qtestcase.h>
+#include <QtCore/qbytearray.h>
+#include <QtCore/qfile.h>
+
+#include <set>
+
+QT_BEGIN_NAMESPACE
+
+/*
+ The file format is simply a grouped listing of keywords
+ Ungrouped entries at the beginning apply to the whole testcase
+ Groups define testfunctions or specific test data to ignore.
+ After the groups come a list of entries (one per line) that define
+ for which platform/os combination to ignore the test result.
+ All keys in a single line have to match to blacklist the test.
+
+ mac
+ [testFunction]
+ linux
+ windows 64bit
+ [testfunction2:testData]
+ msvc
+
+ The known keys are listed below:
+*/
+
+// this table can be extended with new keywords as required
+const char *matchedConditions[] =
+{
+    "*",
+#ifdef Q_OS_LINUX
+    "linux",
+#endif
+#ifdef Q_OS_OSX
+    "osx",
+#endif
+#ifdef Q_OS_WIN
+    "windows",
+#endif
+#ifdef Q_OS_IOS
+    "ios",
+#endif
+#ifdef Q_OS_ANDROID
+    "android",
+#endif
+#ifdef Q_OS_QNX
+    "qnx",
+#endif
+#ifdef Q_OS_WINRT
+    "winrt",
+#endif
+#ifdef Q_OS_WINCE
+    "wince",
+#endif
+
+#if QT_POINTER_SIZE == 8
+    "64bit",
+#else
+    "32bit",
+#endif
+
+#ifdef Q_CC_GNU
+    "gcc",
+#endif
+#ifdef Q_CC_CLANG
+    "clang",
+#endif
+#ifdef Q_CC_MSVC
+    "msvc",
+#endif
+
+#ifdef Q_AUTOTEST_EXPORT
+    "developer-build",
+#endif
+    0
+};
+
+
+static bool checkCondition(const QByteArray &condition)
+{
+    QList<QByteArray> conds = condition.split(' ');
+    std::set<QByteArray> matches;
+    const char **m = matchedConditions;
+    while (*m) {
+        matches.insert(*m);
+        ++m;
+    }
+
+    for (int i = 0; i < conds.size(); ++i) {
+        QByteArray c = conds.at(i);
+        bool result = c.startsWith('!');
+        if (result)
+            c = c.mid(1);
+
+        result ^= (matches.find(c) != matches.end());
+        if (!result)
+            return false;
+    }
+    return true;
+}
+
+static bool ignoreAll = false;
+static std::set<QByteArray> *ignoredTests = 0;
+
+namespace QTestPrivate {
+
+void parseBlackList()
+{
+    QString filename = QTest::qFindTestData(QStringLiteral("BLACKLIST"));
+    if (filename.isEmpty())
+        return;
+    QFile ignored(filename);
+    if (!ignored.open(QIODevice::ReadOnly))
+        return;
+
+    QByteArray function;
+
+    while (!ignored.atEnd()) {
+        QByteArray line = ignored.readLine().simplified();
+        if (line.isEmpty() || line.startsWith('#'))
+            continue;
+        if (line.startsWith('[')) {
+            function = line.mid(1, line.length() - 2);
+            continue;
+        }
+        bool condition = checkCondition(line);
+        if (condition) {
+            if (!function.size()) {
+                ignoreAll = true;
+            } else {
+                if (!ignoredTests)
+                    ignoredTests = new std::set<QByteArray>;
+                ignoredTests->insert(function);
+            }
+        }
+    }
+}
+
+void checkBlackList(const char *slot, const char *data)
+{
+    bool ignore = ignoreAll;
+
+    if (!ignore && ignoredTests) {
+        QByteArray s = slot;
+        ignore = (ignoredTests->find(s) != ignoredTests->end());
+        if (!ignore && data) {
+            s += ':';
+            s += data;
+            ignore = (ignoredTests->find(s) != ignoredTests->end());
+        }
+    }
+
+    QTestResult::setBlacklistCurrentTest(ignore);
+}
+
+}
+
+
+QT_END_NAMESPACE
diff --git a/src/testlib/qtestblacklist_p.h b/src/testlib/qtestblacklist_p.h
new file mode 100644
index 0000000000..38c7810c87
--- /dev/null
+++ b/src/testlib/qtestblacklist_p.h
@@ -0,0 +1,59 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtTest module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QTESTBLACKLIST_P_H
+#define QTESTBLACKLIST_P_H
+
+//
+//  W A R N I N G
+//  -------------
+//
+// This file is not part of the Qt API.  It exists purely as an
+// implementation detail.  This header file may change from version to
+// version without notice, or even be removed.
+//
+// We mean it.
+//
+
+#include <QtTest/qtest_global.h>
+
+QT_BEGIN_NAMESPACE
+
+namespace QTestPrivate {
+    void parseBlackList();
+    void checkBlackList(const char *slot, const char *data);
+}
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/testlib/qtestcase.cpp b/src/testlib/qtestcase.cpp
index 83cba0d672..fd9c3b9301 100644
--- a/src/testlib/qtestcase.cpp
+++ b/src/testlib/qtestcase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -63,6 +55,7 @@
 #include <QtTest/private/qsignaldumper_p.h>
 #include <QtTest/private/qbenchmark_p.h>
 #include <QtTest/private/cycle_p.h>
+#include <QtTest/private/qtestblacklist_p.h>
 
 #include <numeric>
 #include <algorithm>
@@ -1034,6 +1027,13 @@ QT_BEGIN_NAMESPACE
     Returns a textual representation of the given \a variant.
 */
 
+/*!
+    \fn char *QTest::toString(const QVersionNumber &version)
+    \overload
+
+    Returns a textual representation of the given \a version.
+*/
+
 /*! \fn void QTest::qWait(int ms)
 
     Waits for \a ms milliseconds. While waiting, events will be processed and
@@ -2009,6 +2009,9 @@ static bool qInvokeTestMethod(const char *slotName, const char *data=0)
                 QTestResult::setSkipCurrentTest(false);
                 if (!data || !qstrcmp(data, table.testData(curDataIndex)->dataTag())) {
                     foundFunction = true;
+
+                    QTestPrivate::checkBlackList(slot, dataCount ? table.testData(curDataIndex)->dataTag() : 0);
+
                     QTestDataSetter s(curDataIndex >= dataCount ? static_cast<QTestData *>(0)
                                                       : table.testData(curDataIndex));
 
@@ -2361,6 +2364,11 @@ static LONG WINAPI windowsFaultHandler(struct _EXCEPTION_POINTERS *exInfo)
 }
 #endif // Q_OS_WIN) && !Q_OS_WINCE && !Q_OS_WINRT
 
+static void initEnvironment()
+{
+    qputenv("QT_LOGGING_TO_CONSOLE", "1");
+}
+
 /*!
     Executes tests declared in \a testObject. In addition, the private slots
     \c{initTestCase()}, \c{cleanupTestCase()}, \c{init()} and \c{cleanup()}
@@ -2401,6 +2409,7 @@ static LONG WINAPI windowsFaultHandler(struct _EXCEPTION_POINTERS *exInfo)
 
 int QTest::qExec(QObject *testObject, int argc, char **argv)
 {
+    initEnvironment();
     QBenchmarkGlobalData benchmarkData;
     QBenchmarkGlobalData::current = &benchmarkData;
 
@@ -2426,6 +2435,8 @@ int QTest::qExec(QObject *testObject, int argc, char **argv)
     }
 #endif
 
+    QTestPrivate::parseBlackList();
+
     QTestResult::reset();
 
     QTEST_ASSERT(testObject);
@@ -2601,6 +2612,7 @@ void QTest::ignoreMessage(QtMsgType type, const char *message)
     QTestLog::ignoreMessage(type, message);
 }
 
+#ifndef QT_NO_REGULAREXPRESSION
 /*!
     \overload
 
@@ -2616,13 +2628,11 @@ void QTest::ignoreMessage(QtMsgType type, const char *message)
 
     \since 5.3
 */
-
-#ifndef QT_NO_REGULAREXPRESSION
 void QTest::ignoreMessage(QtMsgType type, const QRegularExpression &messagePattern)
 {
     QTestLog::ignoreMessage(type, messagePattern);
 }
-#endif
+#endif // QT_NO_REGULAREXPRESSION
 
 /*! \internal
  */
diff --git a/src/testlib/qtestcase.h b/src/testlib/qtestcase.h
index 2b9acabf95..c1c1559183 100644
--- a/src/testlib/qtestcase.h
+++ b/src/testlib/qtestcase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestcoreelement_p.h b/src/testlib/qtestcoreelement_p.h
index 023c50ab2c..0b353fc59e 100644
--- a/src/testlib/qtestcoreelement_p.h
+++ b/src/testlib/qtestcoreelement_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestcorelist_p.h b/src/testlib/qtestcorelist_p.h
index bd08ede949..2cf531d1dc 100644
--- a/src/testlib/qtestcorelist_p.h
+++ b/src/testlib/qtestcorelist_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestdata.cpp b/src/testlib/qtestdata.cpp
index 3a624dd847..095a9db147 100644
--- a/src/testlib/qtestdata.cpp
+++ b/src/testlib/qtestdata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestdata.h b/src/testlib/qtestdata.h
index d1bc3e7b4e..6c3847c094 100644
--- a/src/testlib/qtestdata.h
+++ b/src/testlib/qtestdata.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestelement.cpp b/src/testlib/qtestelement.cpp
index b3cba843f2..d57601fc9b 100644
--- a/src/testlib/qtestelement.cpp
+++ b/src/testlib/qtestelement.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestelement_p.h b/src/testlib/qtestelement_p.h
index 71f05f94af..1d1452d076 100644
--- a/src/testlib/qtestelement_p.h
+++ b/src/testlib/qtestelement_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestelementattribute.cpp b/src/testlib/qtestelementattribute.cpp
index 0a30a79b65..c84e8023f3 100644
--- a/src/testlib/qtestelementattribute.cpp
+++ b/src/testlib/qtestelementattribute.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestelementattribute_p.h b/src/testlib/qtestelementattribute_p.h
index c84b6d07c8..fc9ac1c1b6 100644
--- a/src/testlib/qtestelementattribute_p.h
+++ b/src/testlib/qtestelementattribute_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestevent.h b/src/testlib/qtestevent.h
index a96cfa7370..708f7614d7 100644
--- a/src/testlib/qtestevent.h
+++ b/src/testlib/qtestevent.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtesteventloop.h b/src/testlib/qtesteventloop.h
index b70954cf66..9e738d2c47 100644
--- a/src/testlib/qtesteventloop.h
+++ b/src/testlib/qtesteventloop.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestkeyboard.h b/src/testlib/qtestkeyboard.h
index d693d66db4..57c3a27295 100644
--- a/src/testlib/qtestkeyboard.h
+++ b/src/testlib/qtestkeyboard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestlog.cpp b/src/testlib/qtestlog.cpp
index 4ef1113641..7ea953232f 100644
--- a/src/testlib/qtestlog.cpp
+++ b/src/testlib/qtestlog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,8 +51,6 @@
 
 QT_BEGIN_NAMESPACE
 
-Q_CORE_EXPORT QString qMessageFormatString(QtMsgType type, const QMessageLogContext &context, const QString& msg);
-
 static void saveCoverageTool(const char * appname, bool testfailed, bool installedTestCoverage)
 {
 #ifdef __COVERAGESCANNER__
@@ -86,6 +76,7 @@ namespace QTest {
     int fails = 0;
     int passes = 0;
     int skips = 0;
+    int blacklists = 0;
 
     struct IgnoreResultList
     {
@@ -287,7 +278,7 @@ namespace QTest {
             // the message is expected, so just swallow it.
             return;
 
-        QString msg = qMessageFormatString(type, context, message);
+        QString msg = qFormatLogMessage(type, context, message);
         msg.chop(1); // remove trailing newline
 
         if (type != QtFatalMsg) {
@@ -417,6 +408,25 @@ void QTestLog::addXPass(const char *msg, const char *file, int line)
     QTest::TestLoggers::addIncident(QAbstractTestLogger::XPass, msg, file, line);
 }
 
+void QTestLog::addBPass(const char *msg)
+{
+    QTEST_ASSERT(msg);
+
+    ++QTest::blacklists;
+
+    QTest::TestLoggers::addIncident(QAbstractTestLogger::BlacklistedPass, msg);
+}
+
+void QTestLog::addBFail(const char *msg, const char *file, int line)
+{
+    QTEST_ASSERT(msg);
+    QTEST_ASSERT(file);
+
+    ++QTest::blacklists;
+
+    QTest::TestLoggers::addIncident(QAbstractTestLogger::BlacklistedFail, msg, file, line);
+}
+
 void QTestLog::addSkip(const char *msg, const char *file, int line)
 {
     QTEST_ASSERT(msg);
@@ -525,7 +535,7 @@ void QTestLog::ignoreMessage(QtMsgType type, const QRegularExpression &expressio
 
     QTest::IgnoreResultList::append(QTest::ignoreResultList, type, QVariant(expression));
 }
-#endif
+#endif // QT_NO_REGULAREXPRESSION
 
 void QTestLog::setMaxWarnings(int m)
 {
@@ -554,6 +564,11 @@ int QTestLog::skipCount()
     return QTest::skips;
 }
 
+int QTestLog::blacklistCount()
+{
+    return QTest::blacklists;
+}
+
 void QTestLog::resetCounters()
 {
     QTest::passes = 0;
diff --git a/src/testlib/qtestlog_p.h b/src/testlib/qtestlog_p.h
index 0ed6750f63..1b29a5bd98 100644
--- a/src/testlib/qtestlog_p.h
+++ b/src/testlib/qtestlog_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -72,6 +64,8 @@ public:
     static void addFail(const char *msg, const char *file, int line);
     static void addXFail(const char *msg, const char *file, int line);
     static void addXPass(const char *msg, const char *file, int line);
+    static void addBPass(const char *msg);
+    static void addBFail(const char *msg, const char *file, int line);
     static void addSkip(const char *msg, const char *file, int line);
     static void addBenchmarkResult(const QBenchmarkResult &result);
 
@@ -104,6 +98,7 @@ public:
     static int passCount();
     static int failCount();
     static int skipCount();
+    static int blacklistCount();
 
     static void resetCounters();
 
diff --git a/src/testlib/qtestmouse.h b/src/testlib/qtestmouse.h
index a07d6bc8c6..0b27537ae4 100644
--- a/src/testlib/qtestmouse.h
+++ b/src/testlib/qtestmouse.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestresult.cpp b/src/testlib/qtestresult.cpp
index 8eb1fa2d9c..8d41f29414 100644
--- a/src/testlib/qtestresult.cpp
+++ b/src/testlib/qtestresult.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,6 +54,7 @@ namespace QTest
     static const char *currentTestObjectName = 0;
     static bool failed = false;
     static bool skipCurrentTest = false;
+    static bool blacklistCurrentTest = false;
 
     static const char *expectFailComment = 0;
     static int expectFailMode = 0;
@@ -77,10 +70,16 @@ void QTestResult::reset()
 
     QTest::expectFailComment = 0;
     QTest::expectFailMode = 0;
+    QTest::blacklistCurrentTest = false;
 
     QTestLog::resetCounters();
 }
 
+void QTestResult::setBlacklistCurrentTest(bool b)
+{
+    QTest::blacklistCurrentTest = b;
+}
+
 bool QTestResult::currentTestFailed()
 {
     return QTest::failed;
@@ -139,7 +138,10 @@ void QTestResult::finishedCurrentTestDataCleanup()
 {
     // If the current test hasn't failed or been skipped, then it passes.
     if (!QTest::failed && !QTest::skipCurrentTest) {
-        QTestLog::addPass("");
+        if (QTest::blacklistCurrentTest)
+            QTestLog::addBPass("");
+        else
+            QTestLog::addPass("");
     }
 
     QTest::failed = false;
@@ -290,7 +292,10 @@ void QTestResult::addFailure(const char *message, const char *file, int line)
 {
     clearExpectFail();
 
-    QTestLog::addFail(message, file, line);
+    if (QTest::blacklistCurrentTest)
+        QTestLog::addBFail(message, file, line);
+    else
+        QTestLog::addFail(message, file, line);
     QTest::failed = true;
 }
 
diff --git a/src/testlib/qtestresult_p.h b/src/testlib/qtestresult_p.h
index ea8173b169..c1c938ff51 100644
--- a/src/testlib/qtestresult_p.h
+++ b/src/testlib/qtestresult_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -74,6 +66,7 @@ public:
     static void finishedCurrentTestDataCleanup();
     static void finishedCurrentTestFunction();
     static void reset();
+    static void setBlacklistCurrentTest(bool b);
 
     static void addFailure(const char *message, const char *file, int line);
     static bool compare(bool success, const char *failureMsg,
diff --git a/src/testlib/qtestspontaneevent.h b/src/testlib/qtestspontaneevent.h
index e299981670..888f6c8019 100644
--- a/src/testlib/qtestspontaneevent.h
+++ b/src/testlib/qtestspontaneevent.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestsystem.h b/src/testlib/qtestsystem.h
index f859ff164d..b60ea3c0cb 100644
--- a/src/testlib/qtestsystem.h
+++ b/src/testlib/qtestsystem.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtesttable.cpp b/src/testlib/qtesttable.cpp
index 7ed0fdb323..75c4a8a33c 100644
--- a/src/testlib/qtesttable.cpp
+++ b/src/testlib/qtesttable.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtesttable_p.h b/src/testlib/qtesttable_p.h
index 203ed82a08..d1dda88d29 100644
--- a/src/testlib/qtesttable_p.h
+++ b/src/testlib/qtesttable_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtesttouch.h b/src/testlib/qtesttouch.h
index 9a661b4ecd..a2a1fdb089 100644
--- a/src/testlib/qtesttouch.h
+++ b/src/testlib/qtesttouch.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestxunitstreamer.cpp b/src/testlib/qtestxunitstreamer.cpp
index ca27f3ba76..f49a105ef5 100644
--- a/src/testlib/qtestxunitstreamer.cpp
+++ b/src/testlib/qtestxunitstreamer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qtestxunitstreamer_p.h b/src/testlib/qtestxunitstreamer_p.h
index c3278b2b53..86dc5f588d 100644
--- a/src/testlib/qtestxunitstreamer_p.h
+++ b/src/testlib/qtestxunitstreamer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qxmltestlogger.cpp b/src/testlib/qxmltestlogger.cpp
index 3fff753c5c..4e26b25f1e 100644
--- a/src/testlib/qxmltestlogger.cpp
+++ b/src/testlib/qxmltestlogger.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,6 +34,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <QtCore/qglobal.h>
+#include <QtCore/qlibraryinfo.h>
 
 #include <QtTest/private/qxmltestlogger_p.h>
 #include <QtTest/private/qtestresult_p.h>
@@ -85,6 +78,10 @@ namespace QTest {
             return "fail";
         case QAbstractTestLogger::XPass:
             return "xpass";
+        case QAbstractTestLogger::BlacklistedPass:
+            return "bpass";
+        case QAbstractTestLogger::BlacklistedFail:
+            return "bfail";
         }
         return "??????";
     }
@@ -115,11 +112,15 @@ void QXmlTestLogger::startLogging()
         outputString(buf.constData());
     }
 
+    QTestCharBuffer quotedBuild;
+    xmlQuote(&quotedBuild, QLibraryInfo::build());
+
     QTest::qt_asprintf(&buf,
                 "<Environment>\n"
                 "    <QtVersion>%s</QtVersion>\n"
+                "    <QtBuild>%s</QtBuild>\n"
                 "    <QTestVersion>" QTEST_VERSION_STR "</QTestVersion>\n"
-                "</Environment>\n", qVersion());
+                "</Environment>\n", qVersion(), quotedBuild.constData());
     outputString(buf.constData());
     m_totalTime.start();
 }
diff --git a/src/testlib/qxmltestlogger_p.h b/src/testlib/qxmltestlogger_p.h
index 8ca15e47e2..e8b0dfb633 100644
--- a/src/testlib/qxmltestlogger_p.h
+++ b/src/testlib/qxmltestlogger_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/qxunittestlogger.cpp b/src/testlib/qxunittestlogger.cpp
index a47f77ae49..e98ddb5e4f 100644
--- a/src/testlib/qxunittestlogger.cpp
+++ b/src/testlib/qxunittestlogger.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,6 +38,15 @@
 #include <QtTest/private/qtestresult_p.h>
 #include <QtTest/private/qbenchmark_p.h>
 
+#ifdef min // windows.h without NOMINMAX is included by the benchmark headers.
+#  undef min
+#endif
+#ifdef max
+#  undef max
+#endif
+
+#include <QtCore/qlibraryinfo.h>
+
 #include <string.h>
 
 QT_BEGIN_NAMESPACE
@@ -108,6 +109,11 @@ void QXunitTestLogger::stopLogging()
     property->addAttribute(QTest::AI_PropertyValue, qVersion());
     properties->addLogElement(property);
 
+    property = new QTestElement(QTest::LET_Property);
+    property->addAttribute(QTest::AI_Name, "QtBuild");
+    property->addAttribute(QTest::AI_PropertyValue, QLibraryInfo::build());
+    properties->addLogElement(property);
+
     currentLogElement->addLogElement(properties);
 
     currentLogElement->addLogElement(iterator);
@@ -161,6 +167,13 @@ void QXunitTestLogger::addIncident(IncidentTypes type, const char *description,
         ++failureCounter;
         typeBuf = "fail";
         break;
+    case QAbstractTestLogger::BlacklistedPass:
+        typeBuf = "bpass";
+        break;
+    case QAbstractTestLogger::BlacklistedFail:
+        ++failureCounter;
+        typeBuf = "bfail";
+        break;
     default:
         typeBuf = "??????";
         break;
@@ -193,6 +206,13 @@ void QXunitTestLogger::addIncident(IncidentTypes type, const char *description,
         if (!strcmp(oldResult, "pass")) {
             overwrite = true;
         }
+        else if (!strcmp(oldResult, "bpass")) {
+            overwrite = (type == QAbstractTestLogger::XPass || type == QAbstractTestLogger::Fail) || (type == QAbstractTestLogger::XFail)
+                    || (type == QAbstractTestLogger::BlacklistedFail);
+        }
+        else if (!strcmp(oldResult, "bfail")) {
+            overwrite = (type == QAbstractTestLogger::XPass || type == QAbstractTestLogger::Fail) || (type == QAbstractTestLogger::XFail);
+        }
         else if (!strcmp(oldResult, "xfail")) {
             overwrite = (type == QAbstractTestLogger::XPass || type == QAbstractTestLogger::Fail);
         }
diff --git a/src/testlib/qxunittestlogger_p.h b/src/testlib/qxunittestlogger_p.h
index 754462473a..fd49c3264f 100644
--- a/src/testlib/qxunittestlogger_p.h
+++ b/src/testlib/qxunittestlogger_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtTest module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/testlib/testlib.pro b/src/testlib/testlib.pro
index 1fb6d6df18..17a03781c2 100644
--- a/src/testlib/testlib.pro
+++ b/src/testlib/testlib.pro
@@ -33,7 +33,8 @@ HEADERS = qbenchmark.h \
     qtestmouse.h \
     qtestspontaneevent.h \
     qtestsystem.h \
-    qtesttouch.h
+    qtesttouch.h \
+    qtestblacklist_p.h
 
 SOURCES = qtestcase.cpp \
     qtestlog.cpp \
@@ -55,7 +56,9 @@ SOURCES = qtestcase.cpp \
     qtestelement.cpp \
     qtestelementattribute.cpp \
     qtestxunitstreamer.cpp \
-    qxunittestlogger.cpp
+    qxunittestlogger.cpp \
+    qtestblacklist.cpp
+
 DEFINES *= QT_NO_CAST_TO_ASCII \
     QT_NO_CAST_FROM_ASCII \
     QT_NO_DATASTREAM
diff --git a/src/tools/bootstrap/bootstrap.pro b/src/tools/bootstrap/bootstrap.pro
index 310ea317ac..2b58bff8f3 100644
--- a/src/tools/bootstrap/bootstrap.pro
+++ b/src/tools/bootstrap/bootstrap.pro
@@ -61,6 +61,7 @@ SOURCES += \
            ../../corelib/io/qabstractfileengine.cpp \
            ../../corelib/io/qbuffer.cpp \
            ../../corelib/io/qdatastream.cpp \
+           ../../corelib/io/qdebug.cpp \
            ../../corelib/io/qdir.cpp \
            ../../corelib/io/qdiriterator.cpp \
            ../../corelib/io/qfile.cpp \
diff --git a/src/tools/moc/generator.cpp b/src/tools/moc/generator.cpp
index a67ea05956..3592974b34 100644
--- a/src/tools/moc/generator.cpp
+++ b/src/tools/moc/generator.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -266,10 +258,12 @@ void Generator::generateCode()
     {
         int idx = 0;
         for (int i = 0; i < strings.size(); ++i) {
-            if (i)
-                fprintf(out, ",\n");
             const QByteArray &str = strings.at(i);
             fprintf(out, "QT_MOC_LITERAL(%d, %d, %d)", i, idx, str.length());
+            if (i != strings.size() - 1)
+                fputc(',', out);
+            const QByteArray comment = str.length() > 32 ? str.left(29) + "..." : str;
+            fprintf(out, " // \"%s\"\n", comment.constData());
             idx += str.length() + 1;
             for (int j = 0; j < str.length(); ++j) {
                 if (str.at(j) == '\\') {
diff --git a/src/tools/moc/generator.h b/src/tools/moc/generator.h
index a01ec5860b..cd76fbb8dd 100644
--- a/src/tools/moc/generator.h
+++ b/src/tools/moc/generator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/keywords.cpp b/src/tools/moc/keywords.cpp
index dc03af3378..bb4f2883cb 100644
--- a/src/tools/moc/keywords.cpp
+++ b/src/tools/moc/keywords.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/main.cpp b/src/tools/moc/main.cpp
index bdeb5477a7..36a949c88b 100644
--- a/src/tools/moc/main.cpp
+++ b/src/tools/moc/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/moc.cpp b/src/tools/moc/moc.cpp
index f5700899fa..5506dc75c5 100644
--- a/src/tools/moc/moc.cpp
+++ b/src/tools/moc/moc.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1552,10 +1544,17 @@ void Moc::checkProperties(ClassDef *cdef)
     // specify get function, for compatibiliy we accept functions
     // returning pointers, or const char * for QByteArray.
     //
+    QSet<QByteArray> definedProperties;
     for (int i = 0; i < cdef->propertyList.count(); ++i) {
         PropertyDef &p = cdef->propertyList[i];
         if (p.read.isEmpty() && p.member.isEmpty())
             continue;
+        if (definedProperties.contains(p.name)) {
+            QByteArray msg = "The property '" + p.name + "' is defined multiple times in class " + cdef->classname + ".";
+            warning(msg.constData());
+        }
+        definedProperties.insert(p.name);
+
         for (int j = 0; j < cdef->publicList.count(); ++j) {
             const FunctionDef &f = cdef->publicList.at(j);
             if (f.name != p.read)
diff --git a/src/tools/moc/moc.h b/src/tools/moc/moc.h
index e8da24b2bf..a6db4d8f98 100644
--- a/src/tools/moc/moc.h
+++ b/src/tools/moc/moc.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -202,13 +194,12 @@ class Moc : public Parser
 {
 public:
     Moc()
-        : noInclude(false), generatedCode(false), mustIncludeQPluginH(false)
+        : noInclude(false), mustIncludeQPluginH(false)
         {}
 
     QByteArray filename;
 
     bool noInclude;
-    bool generatedCode;
     bool mustIncludeQPluginH;
     QByteArray includePath;
     QList<QByteArray> includeFiles;
diff --git a/src/tools/moc/mwerks_mac.cpp b/src/tools/moc/mwerks_mac.cpp
index 5419b9f8a3..2bb5d1eea0 100644
--- a/src/tools/moc/mwerks_mac.cpp
+++ b/src/tools/moc/mwerks_mac.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/mwerks_mac.h b/src/tools/moc/mwerks_mac.h
index 749b3f7ba0..22f5de718d 100644
--- a/src/tools/moc/mwerks_mac.h
+++ b/src/tools/moc/mwerks_mac.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/outputrevision.h b/src/tools/moc/outputrevision.h
index 18ef33995a..fc3a58c5ca 100644
--- a/src/tools/moc/outputrevision.h
+++ b/src/tools/moc/outputrevision.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/parser.cpp b/src/tools/moc/parser.cpp
index 4c754786f7..9b8c14d016 100644
--- a/src/tools/moc/parser.cpp
+++ b/src/tools/moc/parser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/parser.h b/src/tools/moc/parser.h
index f59790fc9c..a4e6d9eb54 100644
--- a/src/tools/moc/parser.h
+++ b/src/tools/moc/parser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/ppkeywords.cpp b/src/tools/moc/ppkeywords.cpp
index 76387d4b18..80eb266089 100644
--- a/src/tools/moc/ppkeywords.cpp
+++ b/src/tools/moc/ppkeywords.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/preprocessor.cpp b/src/tools/moc/preprocessor.cpp
index 2de495f010..087b064c0f 100644
--- a/src/tools/moc/preprocessor.cpp
+++ b/src/tools/moc/preprocessor.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.org>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -640,12 +632,6 @@ Symbols Preprocessor::macroExpandIdentifier(Preprocessor *that, SymbolStack &sym
         if (macro.isVariadic && arguments.size() == macro.arguments.size() - 1)
             arguments += Symbols();
 
-        if (arguments.size() != macro.arguments.size() &&
-            // 0 argument macros are a bit special. They are ok if the
-            // argument is pure whitespace or empty
-            (macro.arguments.size() != 0 || arguments.size() != 1 || !arguments.at(0).isEmpty()))
-            that->warning("Macro argument mismatch.");
-
         // now replace the macro arguments with the expanded arguments
         enum Mode {
             Normal,
diff --git a/src/tools/moc/preprocessor.h b/src/tools/moc/preprocessor.h
index 6403955c1b..fc86781be8 100644
--- a/src/tools/moc/preprocessor.h
+++ b/src/tools/moc/preprocessor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/symbols.h b/src/tools/moc/symbols.h
index b588cd5beb..bb2245b9f8 100644
--- a/src/tools/moc/symbols.h
+++ b/src/tools/moc/symbols.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Olivier Goffart <ogoffart@woboq.com>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/token.cpp b/src/tools/moc/token.cpp
index 36b413ca84..19e6e80c53 100644
--- a/src/tools/moc/token.cpp
+++ b/src/tools/moc/token.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/token.h b/src/tools/moc/token.h
index 2920fadbb9..57be5b4999 100644
--- a/src/tools/moc/token.h
+++ b/src/tools/moc/token.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/util/generate_keywords.cpp b/src/tools/moc/util/generate_keywords.cpp
index 7ad553608c..98800486a3 100644
--- a/src/tools/moc/util/generate_keywords.cpp
+++ b/src/tools/moc/util/generate_keywords.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/moc/utils.h b/src/tools/moc/utils.h
index 0dfd0999f4..e12456c3b7 100644
--- a/src/tools/moc/utils.h
+++ b/src/tools/moc/utils.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdbuscpp2xml/qdbuscpp2xml.cpp b/src/tools/qdbuscpp2xml/qdbuscpp2xml.cpp
index 5417cc9b2f..ea24c35a07 100644
--- a/src/tools/qdbuscpp2xml/qdbuscpp2xml.cpp
+++ b/src/tools/qdbuscpp2xml/qdbuscpp2xml.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdbusxml2cpp/qdbusxml2cpp.cpp b/src/tools/qdbusxml2cpp/qdbusxml2cpp.cpp
index b4f9aedd7a..a85dd44f65 100644
--- a/src/tools/qdbusxml2cpp/qdbusxml2cpp.cpp
+++ b/src/tools/qdbusxml2cpp/qdbusxml2cpp.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -705,9 +697,9 @@ static void writeProxy(const QString &filename, const QDBusIntrospection::Interf
 
             if (isNoReply)
                 hs << "        callWithArgumentList(QDBus::NoBlock, "
-                   <<  "QLatin1String(\"" << method.name << "\"), argumentList);" << endl;
+                   <<  "QStringLiteral(\"" << method.name << "\"), argumentList);" << endl;
             else
-                hs << "        return asyncCallWithArgumentList(QLatin1String(\""
+                hs << "        return asyncCallWithArgumentList(QStringLiteral(\""
                    << method.name << "\"), argumentList);" << endl;
 
             // close the function:
@@ -737,7 +729,7 @@ static void writeProxy(const QString &filename, const QDBusIntrospection::Interf
                 }
 
                 hs << "        QDBusMessage reply = callWithArgumentList(QDBus::Block, "
-                   <<  "QLatin1String(\"" << method.name << "\"), argumentList);" << endl;
+                   <<  "QStringLiteral(\"" << method.name << "\"), argumentList);" << endl;
 
                 argPos++;
                 hs << "        if (reply.type() == QDBusMessage::ReplyMessage && reply.arguments().count() == "
diff --git a/src/tools/qdoc/atom.cpp b/src/tools/qdoc/atom.cpp
index 6f9da3790d..1af31afedd 100644
--- a/src/tools/qdoc/atom.cpp
+++ b/src/tools/qdoc/atom.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -42,31 +34,12 @@
 #include <qregexp.h>
 #include "atom.h"
 #include "location.h"
+#include "qdocdatabase.h"
 #include <stdio.h>
+#include <qdebug.h>
 
 QT_BEGIN_NAMESPACE
 
-QLatin1String Atom::BOLD_          ("bold");
-QLatin1String Atom::INDEX_         ("index");
-QLatin1String Atom::ITALIC_        ("italic");
-QLatin1String Atom::LINK_          ("link");
-QLatin1String Atom::PARAMETER_     ("parameter");
-QLatin1String Atom::SPAN_          ("span");
-QLatin1String Atom::SUBSCRIPT_     ("subscript");
-QLatin1String Atom::SUPERSCRIPT_   ("superscript");
-QLatin1String Atom::TELETYPE_      ("teletype");
-QLatin1String Atom::UICONTROL_     ("uicontrol");
-QLatin1String Atom::UNDERLINE_     ("underline");
-
-QLatin1String Atom::BULLET_        ("bullet");
-QLatin1String Atom::TAG_           ("tag");
-QLatin1String Atom::VALUE_         ("value");
-QLatin1String Atom::LOWERALPHA_    ("loweralpha");
-QLatin1String Atom::LOWERROMAN_    ("lowerroman");
-QLatin1String Atom::NUMERIC_       ("numeric");
-QLatin1String Atom::UPPERALPHA_    ("upperalpha");
-QLatin1String Atom::UPPERROMAN_    ("upperroman");
-
 /*! \class Atom
     \brief The Atom class is the fundamental unit for representing
     documents internally.
@@ -165,6 +138,8 @@ QLatin1String Atom::UPPERROMAN_    ("upperroman");
   \value UnknownCommand
 */
 
+QString Atom::noError_ = QString();
+
 static const struct {
     const char *english;
     int no;
@@ -387,4 +362,68 @@ void Atom::dump() const
             str.toLatin1().data());
 }
 
+/*!
+  The only constructor for LinkAtom. It creates an Atom of
+  type Atom::Link. \a p1 being the link target. \a p2 is the
+  parameters in square brackets. Normally there is just one
+  word in the square brackets, but there can be up to three
+  words separated by spaces. The constructor splits \a p2 on
+  the space character.
+ */
+LinkAtom::LinkAtom(const QString& p1, const QString& p2)
+    : Atom(p1), genus_(Node::DontCare), goal_(Node::NoType), domain_(0)
+{
+    QStringList params = p2.toLower().split(QLatin1Char(' '));
+    foreach (const QString& p, params) {
+        if (!domain_) {
+            domain_ = QDocDatabase::qdocDB()->findTree(p);
+            if (domain_)
+                continue;
+        }
+        if (goal_ == Node::NoType) {
+            goal_ = Node::goal(p);
+            if (goal_ != Node::NoType)
+                continue;
+        }
+        if (p == "qml") {
+            genus_ = Node::QML;
+            continue;
+        }
+        if (p == "cpp") {
+            genus_ = Node::CPP;
+            continue;
+        }
+        error_ = p2;
+        break;
+    }
+}
+
+/*!
+  Standard copy constructor of LinkAtom \a t.
+ */
+LinkAtom::LinkAtom(const LinkAtom& t)
+    : Atom(Link, t.string()),
+      genus_(t.genus_),
+      goal_(t.goal_),
+      domain_(t.domain_),
+      error_(t.error_)
+{
+    // nothing
+}
+
+/*!
+  Special copy constructor of LinkAtom \a t, where
+  where the new LinkAtom will not be the first one
+  in the list.
+ */
+LinkAtom::LinkAtom(Atom* previous, const LinkAtom& t)
+    : Atom(previous, Link, t.string()),
+      genus_(t.genus_),
+      goal_(t.goal_),
+      domain_(t.domain_),
+      error_(t.error_)
+{
+    previous->next_ = this;
+}
+
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/atom.h b/src/tools/qdoc/atom.h
index 84a52c9257..3a7e992f7b 100644
--- a/src/tools/qdoc/atom.h
+++ b/src/tools/qdoc/atom.h
@@ -1,55 +1,48 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-/*
-  atom.h
-*/
-
 #ifndef ATOM_H
 #define ATOM_H
 
 #include <qstringlist.h>
+#include "node.h"
+#include <qdebug.h>
 
 QT_BEGIN_NAMESPACE
 
+class Tree;
+class LinkAtom;
+
 class Atom
 {
 public:
@@ -64,7 +57,7 @@ public:
         BriefRight,
         C,
         CaptionLeft,
-        CaptionRight,
+        CaptionRight,           // 10
         Code,
         CodeBad,
         CodeNew,
@@ -74,7 +67,7 @@ public:
         DivLeft,
         DivRight,
         EndQmlText,
-        FootnoteLeft,
+        FootnoteLeft,           // 20
         FootnoteRight,
         FormatElse,
         FormatEndif,
@@ -84,7 +77,7 @@ public:
         GeneratedList,
         GuidLink,
         HR,
-        Image,
+        Image,                  // 30
         ImageText,
         ImportantLeft,
         ImportantRight,
@@ -94,7 +87,7 @@ public:
         LegaleseLeft,
         LegaleseRight,
         LineBreak,
-        Link,
+        Link,                   // 40
         LinkNode,
         ListLeft,
         ListItemNumber,
@@ -104,7 +97,7 @@ public:
         ListItemRight,
         ListRight,
         Nop,
-        NoteLeft,
+        NoteLeft,               // 50
         NoteRight,
         ParaLeft,
         ParaRight,
@@ -114,7 +107,7 @@ public:
         QuotationRight,
         RawString,
         SectionLeft,
-        SectionRight,
+        SectionRight,           // 60
         SectionHeadingLeft,
         SectionHeadingRight,
         SidebarLeft,
@@ -124,7 +117,7 @@ public:
         SnippetIdentifier,
         SnippetLocation,
         String,
-        TableLeft,
+        TableLeft,              // 70
         TableRight,
         TableHeaderLeft,
         TableHeaderRight,
@@ -134,11 +127,19 @@ public:
         TableItemRight,
         TableOfContents,
         Target,
-        UnhandledFormat,
+        UnhandledFormat,        // 80
         UnknownCommand,
         Last = UnknownCommand
     };
 
+    friend class LinkAtom;
+
+    Atom(const QString& string)
+        : next_(0), type_(Link)
+    {
+        strs << string;
+    }
+
     Atom(Type type, const QString& string = "")
         : next_(0), type_(type)
     {
@@ -169,6 +170,8 @@ public:
         previous->next_ = this;
     }
 
+    virtual ~Atom() { }
+
     void appendChar(QChar ch) { strs[0] += ch; }
     void appendString(const QString& string) { strs[0] += string; }
     void chopString() { strs[0].chop(1); }
@@ -185,34 +188,44 @@ public:
     const QString& string(int i) const { return strs[i]; }
     int count() const { return strs.size(); }
     void dump() const;
+    const QStringList& strings() const { return strs; }
+
+    virtual bool isLinkAtom() const { return false; }
+    virtual Node::Genus genus() const { return Node::DontCare; }
+    virtual bool specifiesDomain() const { return false; }
+    virtual Tree* domain() const { return 0; }
+    virtual Node::Type goal() const { return Node::NoType; }
+    virtual const QString& error() { return noError_; }
 
-    static QLatin1String BOLD_;
-    static QLatin1String INDEX_;
-    static QLatin1String ITALIC_;
-    static QLatin1String LINK_;
-    static QLatin1String PARAMETER_;
-    static QLatin1String SPAN_;
-    static QLatin1String SUBSCRIPT_;
-    static QLatin1String SUPERSCRIPT_;
-    static QLatin1String TELETYPE_;
-    static QLatin1String UICONTROL_;
-    static QLatin1String UNDERLINE_;
-
-    static QLatin1String BULLET_;
-    static QLatin1String TAG_;
-    static QLatin1String VALUE_;
-    static QLatin1String LOWERALPHA_;
-    static QLatin1String LOWERROMAN_;
-    static QLatin1String NUMERIC_;
-    static QLatin1String UPPERALPHA_;
-    static QLatin1String UPPERROMAN_;
-
-private:
+ protected:
+    static QString noError_;
     Atom* next_;
     Type type_;
     QStringList strs;
 };
 
+class LinkAtom : public Atom
+{
+ public:
+    LinkAtom(const QString& p1, const QString& p2);
+    LinkAtom(const LinkAtom& t);
+    LinkAtom(Atom* previous, const LinkAtom& t);
+    virtual ~LinkAtom() { }
+
+    virtual bool isLinkAtom() const { return true; }
+    virtual Node::Genus genus() const { return genus_; }
+    virtual bool specifiesDomain() const { return (domain_ != 0); }
+    virtual Tree* domain() const { return domain_; }
+    virtual Node::Type goal() const { return goal_; }
+    virtual const QString& error() { return error_; }
+
+ protected:
+    Node::Genus genus_;
+    Node::Type  goal_;
+    Tree*       domain_;
+    QString     error_;
+};
+
 #define ATOM_FORMATTING_BOLD            "bold"
 #define ATOM_FORMATTING_INDEX           "index"
 #define ATOM_FORMATTING_ITALIC          "italic"
diff --git a/src/tools/qdoc/codechunk.cpp b/src/tools/qdoc/codechunk.cpp
index 9571bfc362..5a22d4ec4a 100644
--- a/src/tools/qdoc/codechunk.cpp
+++ b/src/tools/qdoc/codechunk.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/codechunk.h b/src/tools/qdoc/codechunk.h
index 0183f3ef36..eab55344d2 100644
--- a/src/tools/qdoc/codechunk.h
+++ b/src/tools/qdoc/codechunk.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/codemarker.cpp b/src/tools/qdoc/codemarker.cpp
index 99f2abfb2f..9a22df4a9f 100644
--- a/src/tools/qdoc/codemarker.cpp
+++ b/src/tools/qdoc/codemarker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -273,7 +265,7 @@ QString CodeMarker::taggedNode(const Node* node)
     case Node::Property:
         tag = QLatin1String("@property");
         break;
-    case Node::Document:
+    case Node::QmlType:
         /*
           Remove the "QML:" prefix, if present.
           There shouldn't be any of these "QML:"
@@ -282,10 +274,11 @@ QString CodeMarker::taggedNode(const Node* node)
           qualifiers, but this code is kept to
           be backward compatible.
         */
-        if (node->subType() == Node::QmlClass) {
-            if (node->name().startsWith(QLatin1String("QML:")))
-                name = name.mid(4);
-        }
+        if (node->name().startsWith(QLatin1String("QML:")))
+            name = name.mid(4);
+        tag = QLatin1String("@property");
+        break;
+    case Node::Document:
         tag = QLatin1String("@property");
         break;
     case Node::QmlMethod:
@@ -400,9 +393,8 @@ void CodeMarker::insert(FastSection &fastSection,
         InnerNode* p = node->parent();
         if (p->type() == Node::QmlPropertyGroup)
             p = p->parent();
-        if (p != fastSection.parent_) { // && !node->parent()->isAbstract()) {
-            if (p->subType() != Node::QmlClass || !p->isAbstract()) {
-                //if (node->type() != Node::QmlProperty) {
+        if (p != fastSection.parent_) {
+            if (!p->isQmlType() || !p->isAbstract()) {
                 inheritedMember = true;
             }
         }
@@ -622,6 +614,7 @@ QStringList CodeMarker::macRefsForNode(Node *node)
     }
     case Node::Namespace:
     case Node::Document:
+    case Node::QmlType:
     default:
         return QStringList();
     }
@@ -648,7 +641,7 @@ QString CodeMarker::macName(const Node *node, const QString &name)
 /*!
   Returns an empty list of documentation sections.
  */
-QList<Section> CodeMarker::qmlSections(const QmlClassNode* , SynopsisStyle )
+QList<Section> CodeMarker::qmlSections(QmlClassNode* , SynopsisStyle , Status )
 {
     return QList<Section>();
 }
diff --git a/src/tools/qdoc/codemarker.h b/src/tools/qdoc/codemarker.h
index 02caedf9b8..8f332de01a 100644
--- a/src/tools/qdoc/codemarker.h
+++ b/src/tools/qdoc/codemarker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,7 +46,6 @@
 QT_BEGIN_NAMESPACE
 
 class Config;
-class Tree;
 
 typedef QMultiMap<QString, Node*> MemberMap; // the string is the member signature
 typedef QPair<const QmlClassNode*, MemberMap> ClassMap;    // the node is the QML type
@@ -155,7 +146,9 @@ public:
     virtual QList<Section> sections(const InnerNode *inner,
                                     SynopsisStyle style,
                                     Status status) = 0;
-    virtual QList<Section> qmlSections(const QmlClassNode* qmlClassNode, SynopsisStyle style);
+    virtual QList<Section> qmlSections(QmlClassNode* qmlClassNode,
+                                       SynopsisStyle style,
+                                       Status status = Okay);
     virtual QStringList macRefsForNode(Node* node);
 
     static void initialize(const Config& config);
diff --git a/src/tools/qdoc/codeparser.cpp b/src/tools/qdoc/codeparser.cpp
index a0ea561b28..00341940da 100644
--- a/src/tools/qdoc/codeparser.cpp
+++ b/src/tools/qdoc/codeparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -76,7 +68,6 @@ QT_BEGIN_NAMESPACE
 QString CodeParser::currentSubDir_;
 QList<CodeParser *> CodeParser::parsers;
 bool CodeParser::showInternal = false;
-QMap<QString,QString> CodeParser::nameToTitle;
 
 /*!
   The constructor adds this code parser to the static
@@ -262,8 +253,7 @@ void CodeParser::processCommonMetaCommand(const Location& location,
         node->setStatus(Node::Main);
     }
     else if (command == COMMAND_OBSOLETE) {
-        if (node->status() != Node::Compat)
-            node->setStatus(Node::Obsolete);
+        node->setStatus(Node::Obsolete);
     }
     else if (command == COMMAND_NONREENTRANT) {
         node->setThreadSafeness(Node::NonReentrant);
@@ -300,50 +290,30 @@ void CodeParser::processCommonMetaCommand(const Location& location,
     else if (command == COMMAND_PAGEKEYWORDS) {
         node->addPageKeywords(arg.first);
     }
-    else if (command == COMMAND_SUBTITLE) {
-        if (node->type() == Node::Document) {
-            DocNode *dn = static_cast<DocNode *>(node);
-            dn->setSubTitle(arg.first);
-        }
-        else
-            location.warning(tr("Ignored '\\%1'").arg(COMMAND_SUBTITLE));
-    }
     else if (command == COMMAND_THREADSAFE) {
         node->setThreadSafeness(Node::ThreadSafe);
     }
     else if (command == COMMAND_TITLE) {
-        if (node->type() == Node::Document) {
-            DocNode *dn = static_cast<DocNode *>(node);
-            dn->setTitle(arg.first);
-            if (dn->subType() == Node::Example) {
-                ExampleNode::exampleNodeMap.insert(dn->title(),static_cast<ExampleNode*>(dn));
-            }
-            nameToTitle.insert(dn->name(),arg.first);
-        }
-        else
-            location.warning(tr("Ignored '\\%1'").arg(COMMAND_TITLE));
+        node->setTitle(arg.first);
+        if (!node->isDocNode() && !node->isCollectionNode())
+            location.warning(tr("Ignored '\\%1'").arg(COMMAND_SUBTITLE));
+        else if (node->isExample())
+            qdb_->addExampleNode(static_cast<ExampleNode*>(node));
+    }
+    else if (command == COMMAND_SUBTITLE) {
+        node->setSubTitle(arg.first);
+        if (!node->isDocNode() && !node->isCollectionNode())
+            location.warning(tr("Ignored '\\%1'").arg(COMMAND_SUBTITLE));
     }
     else if (command == COMMAND_QTVARIABLE) {
-        if (node->subType() == Node::Module) {
-            DocNode *dn = static_cast<DocNode *>(node);
-            dn->setQtVariable(arg.first);
-        }
-        else
-            location.warning(tr("Command '\\%1' found outside of '\\module'. It can only be used within a module page.")
+        node->setQtVariable(arg.first);
+        if (!node->isModule() && !node->isQmlModule())
+            location.warning(tr("Command '\\%1' is only meanigfule in '\\module' and '\\qmlmodule'.")
                              .arg(COMMAND_QTVARIABLE));
     }
 }
 
 /*!
-  Find the page title given the page \a name and return it.
- */
-const QString CodeParser::titleFromName(const QString& name)
-{
-    const QString t = nameToTitle.value(name);
-    return t;
-}
-
-/*!
   \internal
  */
 void CodeParser::extractPageLinkAndDesc(const QString& arg,
@@ -361,8 +331,8 @@ void CodeParser::extractPageLinkAndDesc(const QString& arg,
     else {
         int spaceAt = arg.indexOf(QLatin1Char(' '));
         if (arg.contains(QLatin1String(".html")) && spaceAt != -1) {
-            *link = arg.left(spaceAt).trimmed();
-            *desc = arg.mid(spaceAt).trimmed();
+            *link = arg.leftRef(spaceAt).trimmed().toString();
+            *desc = arg.midRef(spaceAt).trimmed().toString();
         }
         else {
             *link = arg;
@@ -412,9 +382,9 @@ bool CodeParser::isParsingQdoc() const
   for an entity that will produce a documentation page will contain an
   \inmodule command to tell qdoc which module the entity belongs to.
 
-  But now that we normally run qdoc on each module in two passes. The
-  first produces an index file; the second pass generates the docs
-  after reading all the index files it needs.
+  But now we normally run qdoc on each module in two passes. The first
+  produces an index file; the second pass generates the docs after
+  reading all the index files it needs.
 
   This means that all the pages generated during each pass 2 run of
   qdoc almost certainly belong to a single module, and the name of
@@ -431,10 +401,10 @@ bool CodeParser::isParsingQdoc() const
 void CodeParser::checkModuleInclusion(Node* n)
 {
     if (n->moduleName().isEmpty()) {
+        n->setModuleName(Generator::defaultModuleName());
         switch (n->type()) {
         case Node::Class:
             if (n->access() != Node::Private && !n->doc().isEmpty()) {
-                n->setModuleName(Generator::defaultModuleName());
                 n->doc().location().warning(tr("Class %1 has no \\inmodule command; "
                                                "using project name by default: %2")
                                             .arg(n->name()).arg(Generator::defaultModuleName()));
@@ -442,16 +412,15 @@ void CodeParser::checkModuleInclusion(Node* n)
             break;
         case Node::Namespace:
             if (n->access() != Node::Private && !n->name().isEmpty() && !n->doc().isEmpty()) {
-                n->setModuleName(Generator::defaultModuleName());
                 n->doc().location().warning(tr("Namespace %1 has no \\inmodule command; "
                                                "using project name by default: %2")
                                             .arg(n->name()).arg(Generator::defaultModuleName()));
             }
             break;
+#if 0
         case Node::Document:
             if (n->access() != Node::Private && !n->doc().isEmpty()) {
                 if (n->subType() == Node::HeaderFile) {
-                    n->setModuleName(Generator::defaultModuleName());
 #if 0
                     n->doc().location().warning(tr("Header file with title \"%1\" has no \\inmodule command; "
                                                    "using project name by default: %2")
@@ -459,7 +428,6 @@ void CodeParser::checkModuleInclusion(Node* n)
 #endif
                 }
                 else if (n->subType() == Node::Page) {
-                    n->setModuleName(Generator::defaultModuleName());
 #if 0
                     n->doc().location().warning(tr("Page with title \"%1\" has no \\inmodule command; "
                                                    "using project name by default: %2")
@@ -467,7 +435,6 @@ void CodeParser::checkModuleInclusion(Node* n)
 #endif
                 }
                 else if (n->subType() == Node::Example) {
-                    n->setModuleName(Generator::defaultModuleName());
 #if 0
                     n->doc().location().warning(tr("Example with title \"%1\" has no \\inmodule command; "
                                                    "using project name by default: %2")
@@ -476,6 +443,7 @@ void CodeParser::checkModuleInclusion(Node* n)
                 }
             }
             break;
+#endif
         default:
             break;
         }
diff --git a/src/tools/qdoc/codeparser.h b/src/tools/qdoc/codeparser.h
index 89f661abeb..5b3b1192f3 100644
--- a/src/tools/qdoc/codeparser.h
+++ b/src/tools/qdoc/codeparser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -81,7 +73,6 @@ public:
     static CodeParser *parserForLanguage(const QString& language);
     static CodeParser *parserForHeaderFile(const QString &filePath);
     static CodeParser *parserForSourceFile(const QString &filePath);
-    static const QString titleFromName(const QString& name);
     static void setLink(Node* node, Node::LinkType linkType, const QString& arg);
     static const QString& currentOutputSubdirectory() { return currentSubDir_; }
 
@@ -101,7 +92,6 @@ private:
     static QString currentSubDir_;
     static QList<CodeParser *> parsers;
     static bool showInternal;
-    static QMap<QString,QString> nameToTitle;
 };
 
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/config.cpp b/src/tools/qdoc/config.cpp
index 56e7287c40..5c12458cac 100644
--- a/src/tools/qdoc/config.cpp
+++ b/src/tools/qdoc/config.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,6 +48,7 @@
 QT_BEGIN_NAMESPACE
 
 QString ConfigStrings::ALIAS = QStringLiteral("alias");
+QString ConfigStrings::AUTOLINKERRORS = QStringLiteral("autolinkerrors");
 QString ConfigStrings::BASE = QStringLiteral("base");
 QString ConfigStrings::BASEDIR = QStringLiteral("basedir");
 QString ConfigStrings::BUILDVERSION = QStringLiteral("buildversion");
@@ -241,7 +234,8 @@ QStringList MetaStack::getExpanded(const Location& location)
     return top().accum;
 }
 
-QT_STATIC_CONST_IMPL QString Config::dot = QLatin1String(".");
+const QString Config::dot = QLatin1String(".");
+bool Config::debug_ = false;
 bool Config::generateExamples = true;
 QString Config::overrideOutputDir;
 QString Config::installDir;
@@ -326,11 +320,14 @@ bool Config::getBool(const QString& var) const
   Looks up the configuration variable \a var in the string list
   map. Iterates through the string list found, interpreting each
   string in the list as an integer and adding it to a total sum.
-  Returns the sum.
+  Returns the sum or \c -1 if \a var is not set.
  */
 int Config::getInt(const QString& var) const
 {
     QStringList strs = getStringList(var);
+    if (strs.isEmpty())
+        return -1;
+
     QStringList::ConstIterator s = strs.constBegin();
     int sum = 0;
 
@@ -452,87 +449,21 @@ QStringList Config::getStringList(const QString& var) const
 }
 
 /*!
-   \brief Returns the a path list where all paths are canonicalized, then
-          made relative to the config file.
-   \param var The variable containing the list of paths.
-   \see   Location::canonicalRelativePath()
- */
-QStringList Config::getCanonicalPathList(const QString& var) const
-{
-    QStringList t;
-    QList<ConfigVar> configVars = configVars_.values(var);
-    if (!configVars.empty()) {
-        int i = configVars.size() - 1;
-        while (i >= 0) {
-            const ConfigVar& cv = configVars[i];
-            if (!cv.location_.isEmpty())
-                (Location&) lastLocation_ = cv.location_;
-            if (!cv.plus_)
-                t.clear();
-            const QString d = cv.currentPath_;
-            const QStringList& sl = cv.values_;
-            if (!sl.isEmpty()) {
-                t.reserve(t.size() + sl.size());
-                for (int i=0; i<sl.size(); ++i) {
-                    QDir dir(d + "/" + sl[i]);
-                    t.append(dir.canonicalPath());
-                }
-            }
-            --i;
-        }
-    }
-    return t;
-}
-
-/*!
-  This function should only be called when the configuration
-  variable \a var maps to string lists that contain file paths.
-  It cleans the paths with QDir::cleanPath() before returning
-  them.
- */
-QStringList Config::getCleanPathList(const QString& var) const
-{
-    QStringList t;
-    QList<ConfigVar> configVars = configVars_.values(var);
-    if (!configVars.empty()) {
-        int i = configVars.size() - 1;
-        while (i >= 0) {
-            const ConfigVar& cv = configVars[i];
-            if (!cv.plus_)
-                t.clear();
-            if (!cv.location_.isEmpty())
-                (Location&) lastLocation_ = cv.location_;
-            const QStringList& sl = cv.values_;
-            if (!sl.isEmpty()) {
-                t.reserve(t.size() + sl.size());
-                for (int i=0; i<sl.size(); ++i) {
-                    t.append(QDir::cleanPath(sl[i].simplified()));
-                }
-            }
-            --i;
-        }
-    }
-    return t;
-}
-
-/*!
-  This function should only be called when the configuration
-  variable \a var maps to string lists that contain file paths.
-  It cleans the paths with QDir::cleanPath() before returning
-  them.
+   Returns the a path list where all paths from the config variable \a var
+   are canonicalized. If \a validate is true, a warning for invalid paths is
+   generated.
 
-  First, this function looks up the configuration variable \a var
-  in the location map and, if found, sets the internal variable
-  \c{lastLocation_} the Location that \a var maps to.
+   First, this function looks up the configuration variable \a var
+   in the location map and, if found, sets the internal variable
+   \c{lastLocation_} the Location that \a var maps to.
 
-  Then it looks up the configuration variable \a var in the string
-  list map, which maps to one or more records that each contains a
-  list of file paths.
+   Then it looks up the configuration variable \a var in the string
+   list map, which maps to one or more records that each contains a
+   list of file paths.
 
-  These paths might not be clean, so QDir::cleanPath() is called
-  for each one. The string list returned contains cleaned paths.
+   \sa Location::canonicalRelativePath()
  */
-QStringList Config::getPathList(const QString& var) const
+QStringList Config::getCanonicalPathList(const QString& var, bool validate) const
 {
     QStringList t;
     QList<ConfigVar> configVars = configVars_.values(var);
@@ -540,22 +471,23 @@ QStringList Config::getPathList(const QString& var) const
         int i = configVars.size() - 1;
         while (i >= 0) {
             const ConfigVar& cv = configVars[i];
-            if (!cv.plus_)
-                t.clear();
             if (!cv.location_.isEmpty())
                 (Location&) lastLocation_ = cv.location_;
+            if (!cv.plus_)
+                t.clear();
             const QString d = cv.currentPath_;
             const QStringList& sl = cv.values_;
             if (!sl.isEmpty()) {
                 t.reserve(t.size() + sl.size());
                 for (int i=0; i<sl.size(); ++i) {
-                    QFileInfo fileInfo;
-                    QString path = d + "/" + QDir::cleanPath(sl[i].simplified());
-                    fileInfo.setFile(path);
-                    if (!fileInfo.exists())
-                        lastLocation_.warning(tr("File '%1' does not exist").arg(path));
+                    QDir dir(sl[i].simplified());
+                    QString path = dir.path();
+                    if (dir.isRelative())
+                        dir.setPath(d + "/" + path);
+                    if (validate && !QFileInfo::exists(dir.path()))
+                        lastLocation_.warning(tr("Cannot find file or directory: %1").arg(path));
                     else
-                        t.append(path);
+                        t.append(dir.canonicalPath());
                 }
             }
             --i;
@@ -564,7 +496,6 @@ QStringList Config::getPathList(const QString& var) const
     return t;
 }
 
-
 /*!
   Calls getRegExpList() with the control variable \a var and
   iterates through the resulting list of regular expressions,
diff --git a/src/tools/qdoc/config.h b/src/tools/qdoc/config.h
index 54ee8de47f..70b5adfd68 100644
--- a/src/tools/qdoc/config.h
+++ b/src/tools/qdoc/config.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -88,6 +80,8 @@ public:
     Config(const QString& programName);
     ~Config();
 
+    static bool debug_;
+
     void load(const QString& fileName);
     void setStringList(const QString& var, const QStringList& values);
 
@@ -101,9 +95,7 @@ public:
     QString getString(const QString& var) const;
     QSet<QString> getStringSet(const QString& var) const;
     QStringList getStringList(const QString& var) const;
-    QStringList getCanonicalPathList(const QString& var) const;
-    QStringList getCleanPathList(const QString& var) const;
-    QStringList getPathList(const QString& var) const;
+    QStringList getCanonicalPathList(const QString& var, bool validate = false) const;
     QRegExp getRegExp(const QString& var) const;
     QList<QRegExp> getRegExpList(const QString& var) const;
     QSet<QString> subVars(const QString& var) const;
@@ -141,7 +133,7 @@ public:
     static void pushWorkingDir(const QString& dir);
     static QString popWorkingDir();
 
-    QT_STATIC_CONST QString dot;
+    static const QString dot;
 
     static bool generateExamples;
     static QString installDir;
@@ -167,6 +159,7 @@ private:
 struct ConfigStrings
 {
     static QString ALIAS;
+    static QString AUTOLINKERRORS;
     static QString BASE;
     static QString BASEDIR;
     static QString BUILDVERSION;
@@ -239,6 +232,7 @@ struct ConfigStrings
 };
 
 #define CONFIG_ALIAS ConfigStrings::ALIAS
+#define CONFIG_AUTOLINKERRORS ConfigStrings::AUTOLINKERRORS
 #define CONFIG_BASE ConfigStrings::BASE
 #define CONFIG_BASEDIR ConfigStrings::BASEDIR
 #define CONFIG_BUILDVERSION ConfigStrings::BUILDVERSION
diff --git a/src/tools/qdoc/cppcodemarker.cpp b/src/tools/qdoc/cppcodemarker.cpp
index 64b11109f7..48218da513 100644
--- a/src/tools/qdoc/cppcodemarker.cpp
+++ b/src/tools/qdoc/cppcodemarker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -403,12 +395,14 @@ QString CppCodeMarker::markedUpFullName(const Node *node, const Node *relative)
 
 QString CppCodeMarker::markedUpEnumValue(const QString &enumValue, const Node *relative)
 {
+    if (relative->type() != Node::Enum)
+        return enumValue;
+
     const Node *node = relative->parent();
     QString fullName;
     while (node->parent()) {
         fullName.prepend(markedUpName(node));
-        if (node->parent() == relative || node->parent()->name().isEmpty() ||
-            node->parent()->isCollisionNode())
+        if (node->parent() == relative || node->parent()->name().isEmpty())
             break;
         fullName.prepend("<@op>::</@op>");
         node = node->parent();
@@ -629,7 +623,8 @@ QList<Section> CppCodeMarker::sections(const InnerNode *inner,
                 QList<RelatedClass>::ConstIterator r =
                         ancestorClass->baseClasses().constBegin();
                 while (r != ancestorClass->baseClasses().constEnd()) {
-                    stack.prepend((*r).node);
+                    if ((*r).node_)
+                        stack.prepend((*r).node_);
                     ++r;
                 }
             }
@@ -724,7 +719,8 @@ QList<Section> CppCodeMarker::sections(const InnerNode *inner,
                 QList<RelatedClass>::ConstIterator r =
                         ancestorClass->baseClasses().constBegin();
                 while (r != ancestorClass->baseClasses().constEnd()) {
-                    stack.prepend((*r).node);
+                    if ((*r).node_)
+                        stack.prepend((*r).node_);
                     ++r;
                 }
             }
@@ -748,6 +744,16 @@ QList<Section> CppCodeMarker::sections(const InnerNode *inner,
                               style == Detailed ? "types" : QString(),
                               "type",
                               "types");
+            FastSection variables(inner,
+                                  style == Summary ? "Variables" : "Variable Documentation",
+                                  style == Detailed ? "vars" : QString(),
+                                  "variable",
+                                  "variables");
+            FastSection staticVariables(inner,
+                                        "Static Variables",
+                                        QString(),
+                                        "static variable",
+                                        "static variables");
             FastSection functions(inner,
                                   style == Summary ?
                                       "Functions" : "Function Documentation",
@@ -786,14 +792,27 @@ QList<Section> CppCodeMarker::sections(const InnerNode *inner,
                         insert(functions, *n, style, status);
                 }
                     break;
+                case Node::Variable:
+                    {
+                        const VariableNode* var = static_cast<const VariableNode*>(*n);
+                        if (!var->doc().isEmpty()) {
+                            if (var->isStatic())
+                                insert(staticVariables,*n,style,status);
+                            else
+                                insert(variables, *n, style, status);
+                        }
+                    }
+                    break;
                 default:
-                    ;
+                    break;
                 }
                 ++n;
             }
             append(sections, namespaces);
             append(sections, classes);
             append(sections, types);
+            append(sections, variables);
+            append(sections, staticVariables);
             append(sections, functions);
             append(sections, macros);
         }
@@ -1066,7 +1085,7 @@ QString CppCodeMarker::addMarkUp(const QString &in,
   the list of documentation sections for the children of the
   \a qmlClassNode.
  */
-QList<Section> CppCodeMarker::qmlSections(const QmlClassNode* qmlClassNode, SynopsisStyle style)
+QList<Section> CppCodeMarker::qmlSections(QmlClassNode* qmlClassNode, SynopsisStyle style, Status status)
 {
     QList<Section> sections;
     if (qmlClassNode) {
@@ -1107,7 +1126,7 @@ QList<Section> CppCodeMarker::qmlSections(const QmlClassNode* qmlClassNode, Syno
                                            "method",
                                            "methods");
 
-            const QmlClassNode* qcn = qmlClassNode;
+            QmlClassNode* qcn = qmlClassNode;
             while (qcn != 0) {
                 NodeList::ConstIterator c = qcn->childNodes().constBegin();
                 while (c != qcn->childNodes().constEnd()) {
@@ -1116,37 +1135,37 @@ QList<Section> CppCodeMarker::qmlSections(const QmlClassNode* qmlClassNode, Syno
                         continue;
                     }
                     if ((*c)->type() == Node::QmlPropertyGroup) {
-                        insert(qmlproperties, *c, style, Okay);
+                        insert(qmlproperties, *c, style, status);
                     }
                     else if ((*c)->type() == Node::QmlProperty) {
                         const QmlPropertyNode* pn = static_cast<const QmlPropertyNode*>(*c);
                         if (pn->isAttached())
-                            insert(qmlattachedproperties,*c,style,Okay);
+                            insert(qmlattachedproperties,*c,style, status);
                         else {
-                            insert(qmlproperties,*c,style,Okay);
+                            insert(qmlproperties,*c,style, status);
                         }
                     }
                     else if ((*c)->type() == Node::QmlSignal) {
                         const FunctionNode* sn = static_cast<const FunctionNode*>(*c);
                         if (sn->isAttached())
-                            insert(qmlattachedsignals,*c,style,Okay);
+                            insert(qmlattachedsignals,*c,style, status);
                         else
-                            insert(qmlsignals,*c,style,Okay);
+                            insert(qmlsignals,*c,style, status);
                     }
                     else if ((*c)->type() == Node::QmlSignalHandler) {
-                        insert(qmlsignalhandlers,*c,style,Okay);
+                        insert(qmlsignalhandlers,*c,style, status);
                     }
                     else if ((*c)->type() == Node::QmlMethod) {
                         const FunctionNode* mn = static_cast<const FunctionNode*>(*c);
                         if (mn->isAttached())
-                            insert(qmlattachedmethods,*c,style,Okay);
+                            insert(qmlattachedmethods,*c,style, status);
                         else
-                            insert(qmlmethods,*c,style,Okay);
+                            insert(qmlmethods,*c,style, status);
                     }
                     ++c;
                 }
                 if (qcn->qmlBaseNode() != 0) {
-                    qcn = static_cast<const QmlClassNode*>(qcn->qmlBaseNode());
+                    qcn = static_cast<QmlClassNode*>(qcn->qmlBaseNode());
                     if (!qcn->isAbstract())
                         qcn = 0;
                 }
@@ -1172,7 +1191,7 @@ QList<Section> CppCodeMarker::qmlSections(const QmlClassNode* qmlClassNode, Syno
             FastSection qmlmethods(qmlClassNode,"Method Documentation","qmlmeth","member","members");
             FastSection qmlattachedmethods(qmlClassNode,"Attached Method Documentation","qmlattmeth",
                                            "member","members");
-            const QmlClassNode* qcn = qmlClassNode;
+            QmlClassNode* qcn = qmlClassNode;
             while (qcn != 0) {
                 NodeList::ConstIterator c = qcn->childNodes().constBegin();
                 while (c != qcn->childNodes().constEnd()) {
@@ -1181,36 +1200,36 @@ QList<Section> CppCodeMarker::qmlSections(const QmlClassNode* qmlClassNode, Syno
                         continue;
                     }
                     if ((*c)->type() == Node::QmlPropertyGroup) {
-                        insert(qmlproperties,*c,style,Okay);
+                        insert(qmlproperties,*c,style, status);
                     }
                     else if ((*c)->type() == Node::QmlProperty) {
                         const QmlPropertyNode* pn = static_cast<const QmlPropertyNode*>(*c);
                         if (pn->isAttached())
-                            insert(qmlattachedproperties,*c,style,Okay);
+                            insert(qmlattachedproperties,*c,style, status);
                         else
-                            insert(qmlproperties,*c,style,Okay);
+                            insert(qmlproperties,*c,style, status);
                     }
                     else if ((*c)->type() == Node::QmlSignal) {
                         const FunctionNode* sn = static_cast<const FunctionNode*>(*c);
                         if (sn->isAttached())
-                            insert(qmlattachedsignals,*c,style,Okay);
+                            insert(qmlattachedsignals,*c,style, status);
                         else
-                            insert(qmlsignals,*c,style,Okay);
+                            insert(qmlsignals,*c,style, status);
                     }
                     else if ((*c)->type() == Node::QmlSignalHandler) {
-                        insert(qmlsignalhandlers,*c,style,Okay);
+                        insert(qmlsignalhandlers,*c,style, status);
                     }
                     else if ((*c)->type() == Node::QmlMethod) {
                         const FunctionNode* mn = static_cast<const FunctionNode*>(*c);
                         if (mn->isAttached())
-                            insert(qmlattachedmethods,*c,style,Okay);
+                            insert(qmlattachedmethods,*c,style, status);
                         else
-                            insert(qmlmethods,*c,style,Okay);
+                            insert(qmlmethods,*c,style, status);
                     }
                     ++c;
                 }
                 if (qcn->qmlBaseNode() != 0) {
-                    qcn = static_cast<const QmlClassNode*>(qcn->qmlBaseNode());
+                    qcn = static_cast<QmlClassNode*>(qcn->qmlBaseNode());
                     if (!qcn->isAbstract())
                         qcn = 0;
                 }
@@ -1232,7 +1251,7 @@ QList<Section> CppCodeMarker::qmlSections(const QmlClassNode* qmlClassNode, Syno
              */
             ClassMap* classMap = 0;
             FastSection all(qmlClassNode,QString(),QString(),"member","members");
-            const QmlClassNode* current = qmlClassNode;
+            QmlClassNode* current = qmlClassNode;
             while (current != 0) {
                 /*
                   If the QML type is abstract, do not create
diff --git a/src/tools/qdoc/cppcodemarker.h b/src/tools/qdoc/cppcodemarker.h
index 91a9c01a28..ec2ee124d4 100644
--- a/src/tools/qdoc/cppcodemarker.h
+++ b/src/tools/qdoc/cppcodemarker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -78,7 +70,9 @@ public:
     virtual QList<Section> sections(const InnerNode *innerNode,
                                     SynopsisStyle style,
                                     Status status);
-    virtual QList<Section> qmlSections(const QmlClassNode* qmlClassNode, SynopsisStyle style);
+    virtual QList<Section> qmlSections(QmlClassNode* qmlClassNode,
+                                       SynopsisStyle style,
+                                       Status status = Okay);
 
 private:
     QString addMarkUp(const QString& protectedCode,
diff --git a/src/tools/qdoc/cppcodeparser.cpp b/src/tools/qdoc/cppcodeparser.cpp
index bb403bd4d9..66dfa3290f 100644
--- a/src/tools/qdoc/cppcodeparser.cpp
+++ b/src/tools/qdoc/cppcodeparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,6 +44,7 @@
 #include "tokenizer.h"
 #include "qdocdatabase.h"
 #include <qdebug.h>
+#include "generator.h"
 
 QT_BEGIN_NAMESPACE
 
@@ -99,8 +92,8 @@ void CppCodeParser::initializeParser(const Config &config)
     nodeTypeMap.insert(COMMAND_PROPERTY, Node::Property);
     nodeTypeMap.insert(COMMAND_VARIABLE, Node::Variable);
 
-    exampleFiles = config.getCleanPathList(CONFIG_EXAMPLES);
-    exampleDirs = config.getCleanPathList(CONFIG_EXAMPLEDIRS);
+    exampleFiles = config.getCanonicalPathList(CONFIG_EXAMPLES);
+    exampleDirs = config.getCanonicalPathList(CONFIG_EXAMPLEDIRS);
     QStringList exampleFilePatterns = config.getStringList(
                 CONFIG_EXAMPLES + Config::dot + CONFIG_FILEEXTENSIONS);
 
@@ -173,7 +166,7 @@ void CppCodeParser::parseHeaderFile(const Location& location, const QString& fil
     Tokenizer fileTokenizer(fileLocation, in);
     tokenizer = &fileTokenizer;
     readToken();
-    matchDeclList(qdb_->treeRoot());
+    matchDeclList(qdb_->primaryTreeRoot());
     if (!fileTokenizer.version().isEmpty())
         qdb_->setVersion(fileTokenizer.version());
     in.close();
@@ -218,15 +211,13 @@ void CppCodeParser::parseSourceFile(const Location& location, const QString& fil
 }
 
 /*!
-  This is called after all the header files have been parsed.
-  I think the most important thing it does is resolve class
-  inheritance links in the tree. But it also initializes a
-  bunch of stuff.
+  This is called after all the C++ header files have been
+  parsed. The most important thing it does is resolve C++
+  class inheritance links in the tree. It also initializes
+  a bunch of other collections.
  */
 void CppCodeParser::doneParsingHeaderFiles()
 {
-    qdb_->resolveInheritance();
-
     QMapIterator<QString, QString> i(sequentialIteratorClasses);
     while (i.hasNext()) {
         i.next();
@@ -265,11 +256,10 @@ void CppCodeParser::doneParsingHeaderFiles()
  */
 void CppCodeParser::doneParsingSourceFiles()
 {
-    qdb_->treeRoot()->clearCurrentChildPointers();
-    qdb_->treeRoot()->normalizeOverloads();
+    qdb_->primaryTreeRoot()->normalizeOverloads();
     qdb_->fixInheritance();
     qdb_->resolveProperties();
-    qdb_->treeRoot()->makeUndocumentedChildrenInternal();
+    qdb_->primaryTreeRoot()->makeUndocumentedChildrenInternal();
 }
 
 static QSet<QString> topicCommands_;
@@ -328,38 +318,33 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
             doc.startLocation().warning(tr("Invalid syntax in '\\%1'").arg(COMMAND_FN));
         }
         else {
-            func = qdb_->findNodeInOpenNamespace(parentPath, clone);
-            /*
-              Search the root namespace if no match was found.
-            */
+            func = qdb_->findFunctionNode(parentPath, clone);
             if (func == 0) {
-                func = qdb_->findFunctionNode(parentPath, clone);
+                if (parentPath.isEmpty() && !lastPath_.isEmpty())
+                    func = qdb_->findFunctionNode(lastPath_, clone);
             }
 
+            /*
+              If the node was not found, then search for it in the
+              open C++ namespaces. We don't expect this search to
+              be necessary often. Nor do we expect it to succeed
+              very often.
+            */
+            if (func == 0)
+                func = qdb_->findNodeInOpenNamespace(parentPath, clone);
+
             if (func == 0) {
-                if (parentPath.isEmpty() && !lastPath_.isEmpty()) {
-                    func = qdb_->findFunctionNode(lastPath_, clone);
-                }
-                if (func == 0) {
-                    doc.location().warning(tr("Cannot find '%1' in '\\%2' %3")
-                                           .arg(clone->name() + "(...)")
-                                           .arg(COMMAND_FN)
-                                           .arg(arg.first),
-                                           tr("I cannot find any function of that name with the "
-                                              "specified signature. Make sure that the signature "
-                                              "is identical to the declaration, including 'const' "
-                                              "qualifiers."));
-                }
-                else {
-                    doc.location().warning(tr("Missing '%1::' for '%2' in '\\%3'")
-                                           .arg(lastPath_.join("::"))
-                                           .arg(clone->name() + "()")
-                                           .arg(COMMAND_FN));
-                }
+                doc.location().warning(tr("Cannot find '%1' in '\\%2' %3")
+                                       .arg(clone->name() + "(...)")
+                                       .arg(COMMAND_FN)
+                                       .arg(arg.first),
+                                       tr("I cannot find any function of that name with the "
+                                          "specified signature. Make sure that the signature "
+                                          "is identical to the declaration, including 'const' "
+                                          "qualifiers."));
             }
-            else {
+            else
                 lastPath_ = parentPath;
-            }
             if (func) {
                 func->borrowParameterNames(clone);
                 func->setParentPath(clone->parentPath());
@@ -372,7 +357,7 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
         QStringList parentPath;
         FunctionNode *func = 0;
 
-        extra.root = qdb_->treeRoot();
+        extra.root = qdb_->primaryTreeRoot();
         extra.isMacro = true;
         if (makeFunctionNode(arg.first, &parentPath, &func, extra)) {
             if (!parentPath.isEmpty()) {
@@ -394,7 +379,7 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
             return func;
         }
         else if (QRegExp("[A-Za-z_][A-Za-z0-9_]+").exactMatch(arg.first)) {
-            func = new FunctionNode(qdb_->treeRoot(), arg.first);
+            func = new FunctionNode(qdb_->primaryTreeRoot(), arg.first);
             func->setAccess(Node::Public);
             func->setLocation(doc.startLocation());
             func->setMetaness(FunctionNode::MacroWithoutParams);
@@ -415,29 +400,13 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
           without including the namespace qualifier.
          */
         Node::Type type =  nodeTypeMap[command];
-        Node::SubType subtype = Node::NoSubType;
-        if (type == Node::Document)
-            subtype = Node::QmlClass;
-
         QStringList paths = arg.first.split(QLatin1Char(' '));
         QStringList path = paths[0].split("::");
         Node *node = 0;
 
-        /*
-          If the command refers to something that can be in a
-          C++ namespace, search for it first in all the known
-          C++ namespaces.
-         */
-        node = qdb_->findNodeInOpenNamespace(path, type, subtype);
-
-        /*
-          If the node was not found in a C++ namespace, search
-          for it in the root namespace.
-         */
-        if (node == 0) {
-            node = qdb_->findNodeByNameAndType(path, type, subtype);
-        }
-
+        node = qdb_->findNodeInOpenNamespace(path, type);
+        if (node == 0)
+            node = qdb_->findNodeByNameAndType(path, type);
         if (node == 0) {
             doc.location().warning(tr("Cannot find '%1' specified with '\\%2' in any header file")
                                    .arg(arg.first).arg(command));
@@ -446,53 +415,58 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
         }
         else if (node->isInnerNode()) {
             /*
-              This treets a class as a namespace.
+              This treats a class as a namespace.
              */
-            if (path.size() > 1) {
-                path.pop_back();
-                QString ns = path.join("::");
-                qdb_->insertOpenNamespace(ns);
+            if ((type == Node::Class) || (type == Node::Namespace)) {
+                if (path.size() > 1) {
+                    path.pop_back();
+                    QString ns = path.join("::");
+                    qdb_->insertOpenNamespace(ns);
+                }
             }
         }
         return node;
     }
     else if (command == COMMAND_EXAMPLE) {
         if (Config::generateExamples) {
-            ExampleNode* en = new ExampleNode(qdb_->treeRoot(), arg.first);
+            ExampleNode* en = new ExampleNode(qdb_->primaryTreeRoot(), arg.first);
             en->setLocation(doc.startLocation());
             createExampleFileNodes(en);
             return en;
         }
     }
     else if (command == COMMAND_EXTERNALPAGE) {
-        DocNode* dn = new DocNode(qdb_->treeRoot(), arg.first, Node::ExternalPage, Node::ArticlePage);
+        DocNode* dn = new DocNode(qdb_->primaryTreeRoot(), arg.first, Node::ExternalPage, Node::ArticlePage);
         dn->setLocation(doc.startLocation());
         return dn;
     }
     else if (command == COMMAND_FILE) {
-        DocNode* dn = new DocNode(qdb_->treeRoot(), arg.first, Node::File, Node::NoPageType);
-        dn->setLocation(doc.startLocation());
-        return dn;
-    }
-    else if (command == COMMAND_GROUP) {
-        DocNode* dn = qdb_->addGroup(arg.first);
+        DocNode* dn = new DocNode(qdb_->primaryTreeRoot(), arg.first, Node::File, Node::NoPageType);
         dn->setLocation(doc.startLocation());
         return dn;
     }
     else if (command == COMMAND_HEADERFILE) {
-        DocNode* dn = new DocNode(qdb_->treeRoot(), arg.first, Node::HeaderFile, Node::ApiPage);
+        DocNode* dn = new DocNode(qdb_->primaryTreeRoot(), arg.first, Node::HeaderFile, Node::ApiPage);
         dn->setLocation(doc.startLocation());
         return dn;
     }
+    else if (command == COMMAND_GROUP) {
+        GroupNode* gn = qdb_->addGroup(arg.first);
+        gn->setLocation(doc.startLocation());
+        gn->markSeen();
+        return gn;
+    }
     else if (command == COMMAND_MODULE) {
-        DocNode* dn = qdb_->addModule(arg.first);
-        dn->setLocation(doc.startLocation());
-        return dn;
+        ModuleNode* mn = qdb_->addModule(arg.first);
+        mn->setLocation(doc.startLocation());
+        mn->markSeen();
+        return mn;
     }
     else if (command == COMMAND_QMLMODULE) {
-        DocNode* dn = qdb_->addQmlModule(arg.first);
-        dn->setLocation(doc.startLocation());
-        return dn;
+        QmlModuleNode* qmn = qdb_->addQmlModule(arg.first);
+        qmn->setLocation(doc.startLocation());
+        qmn->markSeen();
+        return qmn;
     }
     else if (command == COMMAND_PAGE) {
         Node::PageType ptype = Node::ArticlePage;
@@ -515,31 +489,25 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
                 ptype = Node::DitaMapPage;
         }
 
-        /*
-          Search for a node with the same name. If there is one,
-          then there is a collision, so create a collision node
-          and make the existing node a child of the collision
-          node, and then create the new Page node and make
-          it a child of the collision node as well. Return the
-          collision node.
-
-          If there is no collision, just create a new Page
-          node and return that one.
-        */
-        NameCollisionNode* ncn = qdb_->checkForCollision(args[0]);
+#if 0
+        const Node* n = qdb_->checkForCollision(args[0]);
+        if (n) {
+            QString other = n->doc().location().fileName();
+            doc.location().warning(tr("Name/title collision detected: '%1' in '\\%2'")
+                                   .arg(args[0]).arg(command),
+                                   tr("Also used here: %1").arg(other));
+        }
+#endif
         DocNode* dn = 0;
         if (ptype == Node::DitaMapPage)
-            dn = new DitaMapNode(qdb_->treeRoot(), args[0]);
+            dn = new DitaMapNode(qdb_->primaryTreeRoot(), args[0]);
         else
-            dn = new DocNode(qdb_->treeRoot(), args[0], Node::Page, ptype);
+            dn = new DocNode(qdb_->primaryTreeRoot(), args[0], Node::Page, ptype);
         dn->setLocation(doc.startLocation());
-        if (ncn) {
-            ncn->addCollision(dn);
-        }
         return dn;
     }
     else if (command == COMMAND_DITAMAP) {
-        DocNode* dn = new DitaMapNode(qdb_->treeRoot(), arg.first);
+        DocNode* dn = new DitaMapNode(qdb_->primaryTreeRoot(), arg.first);
         dn->setLocation(doc.startLocation());
         return dn;
     }
@@ -567,43 +535,22 @@ Node* CppCodeParser::processTopicCommand(const Doc& doc,
                 classNode = qdb_->findClassNode(names[1].split("::"));
         }
 
-        /*
-          Search for a node with the same name. If there is one,
-          then there is a collision, so create a collision node
-          and make the existing node a child of the collision
-          node, and then create the new QML class node and make
-          it a child of the collision node as well. Return the
-          collision node.
-
-          If there is no collision, just create a new QML class
-          node and return that one.
-         */
-        NameCollisionNode* ncn = qdb_->checkForCollision(names[0]);
-        QmlClassNode* qcn = new QmlClassNode(qdb_->treeRoot(), names[0]);
-        qcn->setClassNode(classNode);
-        qcn->setLocation(doc.startLocation());
 #if 0
-        // to be removed if \qmltype and \instantiates work ok
-        if (isParsingCpp() || isParsingQdoc()) {
-            qcn->requireCppClass();
-            if (names.size() < 2) {
-                QString msg = "C++ class name not specified for class documented as "
-                    "QML type: '\\qmlclass " + arg.first + " <class name>'";
-                doc.startLocation().warning(tr(msg.toLatin1().data()));
-            }
-            else if (!classNode) {
-                QString msg = "C++ class not found in any .h file for class documented "
-                    "as QML type: '\\qmlclass " + arg.first + "'";
-                doc.startLocation().warning(tr(msg.toLatin1().data()));
-            }
+        const Node* n = qdb_->checkForCollision(names[0]);
+        if (n) {
+            QString other = n->doc().location().fileName();
+            doc.location().warning(tr("Name/title collision detected: '%1' in '\\%2'")
+                                   .arg(names[0]).arg(command),
+                                   tr("Also used here: %1").arg(other));
         }
 #endif
-        if (ncn)
-            ncn->addCollision(qcn);
+        QmlClassNode* qcn = new QmlClassNode(qdb_->primaryTreeRoot(), names[0]);
+        qcn->setClassNode(classNode);
+        qcn->setLocation(doc.startLocation());
         return qcn;
     }
     else if (command == COMMAND_QMLBASICTYPE) {
-        QmlBasicTypeNode* n = new QmlBasicTypeNode(qdb_->treeRoot(), arg.first);
+        QmlBasicTypeNode* n = new QmlBasicTypeNode(qdb_->primaryTreeRoot(), arg.first);
         n->setLocation(doc.startLocation());
         return n;
     }
@@ -849,7 +796,7 @@ void CppCodeParser::processQmlProperties(const Doc& doc, NodeList& nodes, DocLis
             if (splitQmlPropertyArg(arg, type, module, qmlType, property)) {
                 qmlClass = qdb_->findQmlType(module, qmlType);
                 if (qmlClass) {
-                    if (qmlClass->hasQmlProperty(property) != 0) {
+                    if (qmlClass->hasQmlProperty(property, attached) != 0) {
                         QString msg = tr("QML property documented multiple times: '%1'").arg(arg);
                         doc.startLocation().warning(msg);
                     }
@@ -959,38 +906,12 @@ void CppCodeParser::processOtherMetaCommand(const Doc& doc,
         }
     }
     else if (command == COMMAND_RELATES) {
-        /*
-          Find the node that this node relates to.
-         */
-        Node* n = 0;
-        if (arg.startsWith(QLatin1Char('<')) || arg.startsWith('"')) {
-            /*
-              It should be a header file, I think.
-            */
-            n = qdb_->findNodeByNameAndType(QStringList(arg), Node::Document, Node::NoSubType);
-        }
-        else {
-            /*
-              If it wasn't a file, it should be either a class or a namespace.
-             */
-            QStringList newPath = arg.split("::");
-            n = qdb_->findClassNode(newPath);
-            if (!n)
-                n = qdb_->findNamespaceNode(newPath);
-        }
-
-        if (!n) {
-            /*
-              Didn't ind it. Error...
-             */
+        QStringList path = arg.split("::");
+        Node* n = qdb_->findRelatesNode(path);
+        if (!n)
             doc.location().warning(tr("Cannot find '%1' in '\\%2'").arg(arg).arg(COMMAND_RELATES));
-        }
-        else {
-            /*
-              Found it. This node relates to it.
-             */
+        else
             node->setRelates(static_cast<InnerNode*>(n));
-        }
     }
     else if (command == COMMAND_CONTENTSPAGE) {
         setLink(node, Node::ContentsLink, arg);
@@ -1010,14 +931,14 @@ void CppCodeParser::processOtherMetaCommand(const Doc& doc,
     else if (command == COMMAND_QMLINHERITS) {
         if (node->name() == arg)
             doc.location().warning(tr("%1 tries to inherit itself").arg(arg));
-        else if (node->subType() == Node::QmlClass) {
+        else if (node->isQmlType()) {
             QmlClassNode *qmlClass = static_cast<QmlClassNode*>(node);
             qmlClass->setQmlBaseName(arg);
             QmlClassNode::addInheritedBy(arg,node);
         }
     }
     else if (command == COMMAND_QMLINSTANTIATES) {
-        if ((node->type() == Node::Document) && (node->subType() == Node::QmlClass)) {
+        if (node->isQmlType()) {
             ClassNode* classNode = qdb_->findClassNode(arg.split("::"));
             if (classNode)
                 node->setClassNode(classNode);
@@ -1062,9 +983,8 @@ void CppCodeParser::processOtherMetaCommand(const Doc& doc,
         }
     }
     else if (command == COMMAND_QMLABSTRACT) {
-        if ((node->type() == Node::Document) && (node->subType() == Node::QmlClass)) {
+        if (node->isQmlType())
             node->setAbstract(true);
-        }
     }
     else {
         processCommonMetaCommand(doc.location(),command,argLocPair,node);
@@ -1636,11 +1556,7 @@ bool CppCodeParser::matchBaseSpecifier(ClassNode *classe, bool isClass)
     if (!matchDataType(&baseClass))
         return false;
 
-    qdb_->addBaseClass(classe,
-                       access,
-                       baseClass.toPath(),
-                       baseClass.toString(),
-                       classe->parent());
+    classe->addUnresolvedBaseClass(access, baseClass.toPath(), baseClass.toString());
     return true;
 }
 
@@ -1676,7 +1592,7 @@ bool CppCodeParser::matchClassDecl(InnerNode *parent,
     while (tok == Tok_Ident)
         readToken();
     if (tok == Tok_Gulbrandsen) {
-        Node* n = parent->findChildNodeByNameAndType(previousLexeme(),Node::Class);
+        Node* n = parent->findChildNode(previousLexeme(),Node::Class);
         if (n) {
             parent = static_cast<InnerNode*>(n);
             if (parent) {
@@ -1735,9 +1651,8 @@ bool CppCodeParser::matchNamespaceDecl(InnerNode *parent)
     */
     QString namespaceName = previousLexeme();
     NamespaceNode* ns = 0;
-    if (parent) {
-        ns = static_cast<NamespaceNode*>(parent->findChildNodeByNameAndType(namespaceName, Node::Namespace));
-    }
+    if (parent)
+        ns = static_cast<NamespaceNode*>(parent->findChildNode(namespaceName, Node::Namespace));
     if (!ns) {
         ns = new NamespaceNode(parent, namespaceName);
         ns->setAccess(access);
@@ -1875,7 +1790,7 @@ bool CppCodeParser::matchTypedefDecl(InnerNode *parent)
     if (!match(Tok_Semicolon))
         return false;
 
-    if (parent && !parent->findChildNodeByNameAndType(name, Node::Typedef)) {
+    if (parent && !parent->findChildNode(name, Node::Typedef)) {
         TypedefNode* td = new TypedefNode(parent, name);
         td->setAccess(access);
         td->setLocation(location());
@@ -2110,7 +2025,7 @@ bool CppCodeParser::matchDeclList(InnerNode *parent)
                     TypedefNode *flagsNode = new TypedefNode(parent, flagsType);
                     flagsNode->setAccess(access);
                     flagsNode->setLocation(location());
-                    EnumNode* en = static_cast<EnumNode*>(parent->findChildNodeByNameAndType(name, Node::Enum));
+                    EnumNode* en = static_cast<EnumNode*>(parent->findChildNode(name, Node::Enum));
                     if (en)
                         en->setFlagsType(flagsNode);
                 }
@@ -2189,9 +2104,15 @@ bool CppCodeParser::matchDocsAndStuff()
                 FunctionNode *func = 0;
 
                 if (matchFunctionDecl(0, &parentPath, &clone, QString(), extra)) {
-                    func = qdb_->findNodeInOpenNamespace(parentPath, clone);
+                    func = qdb_->findFunctionNode(parentPath, clone);
+                    /*
+                      If the node was not found, then search for it in the
+                      open C++ namespaces. We don't expect this search to
+                      be necessary often. Nor do we expect it to succeed
+                      very often.
+                    */
                     if (func == 0)
-                        func = qdb_->findFunctionNode(parentPath, clone);
+                        func = qdb_->findNodeInOpenNamespace(parentPath, clone);
 
                     if (func) {
                         func->borrowParameterNames(clone);
@@ -2253,8 +2174,9 @@ bool CppCodeParser::matchDocsAndStuff()
                 checkModuleInclusion(*n);
                 if ((*n)->isInnerNode() && ((InnerNode *)*n)->includes().isEmpty()) {
                     InnerNode *m = static_cast<InnerNode *>(*n);
-                    while (m->parent() != qdb_->treeRoot())
+                    while (m->parent() && m->moduleName().isEmpty()) {
                         m = m->parent();
+                    }
                     if (m == *n)
                         ((InnerNode *)*n)->addInclude((*n)->name());
                     else
@@ -2391,7 +2313,7 @@ void CppCodeParser::instantiateIteratorMacro(const QString &container,
     Tokenizer stringTokenizer(loc, latin1);
     tokenizer = &stringTokenizer;
     readToken();
-    matchDeclList(QDocDatabase::qdocDB()->treeRoot());
+    matchDeclList(QDocDatabase::qdocDB()->primaryTreeRoot());
 }
 
 void CppCodeParser::createExampleFileNodes(DocNode *dn)
diff --git a/src/tools/qdoc/cppcodeparser.h b/src/tools/qdoc/cppcodeparser.h
index 5ab72f7f54..7499575d13 100644
--- a/src/tools/qdoc/cppcodeparser.h
+++ b/src/tools/qdoc/cppcodeparser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/ditaxmlgenerator.cpp b/src/tools/qdoc/ditaxmlgenerator.cpp
index e3b9bdd264..d9cf56769b 100644
--- a/src/tools/qdoc/ditaxmlgenerator.cpp
+++ b/src/tools/qdoc/ditaxmlgenerator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -667,15 +659,12 @@ GuidMap* DitaXmlGenerator::lookupGuidMap(const QString& fileName)
 }
 
 /*!
-  Traverses the database generating all the DITA XML documentation.
+  Traverses the current tree generating all the DITA XML documentation.
  */
-void DitaXmlGenerator::generateTree()
+void DitaXmlGenerator::generateDocs()
 {
-    qdb_->buildCollections();
-    if (!runPrepareOnly()) {
-        Generator::generateTree();
-        generateCollisionPages();
-    }
+    if (!runPrepareOnly())
+        Generator::generateDocs();
 
     if (!runGenerateOnly()) {
         QString fileBase = project.toLower().simplified().replace(QLatin1Char(' '), QLatin1Char('-'));
@@ -766,7 +755,7 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
     case Atom::AutoLink:
         if (!noLinks && !inLink_ && !inContents_ && !inSectionHeading_) {
             const Node* node = 0;
-            QString link = getLink(atom, relative, &node);
+            QString link = getAutoLink(atom, relative, &node);
             if (!link.isEmpty()) {
                 beginLink(link);
                 generateLink(atom, marker);
@@ -820,7 +809,6 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
         }
         break;
     case Atom::BriefRight:
-        //        if (relative->type() != Node::Document)
         writeEndTag(); // </shortdesc> or </p>
         if (in_para)
             in_para = false;
@@ -1013,9 +1001,9 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
         break;
     case Atom::AnnotatedList:
         {
-            DocNode* dn = qdb_->getGroup(atom->string());
-            if (dn)
-                generateAnnotatedList(relative, marker, dn->members());
+            GroupNode* gn = qdb_->getGroup(atom->string());
+            if (gn)
+                generateAnnotatedList(relative, marker, gn->members());
         }
         break;
     case Atom::GeneratedList:
@@ -1032,10 +1020,10 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
             QString arg = atom->string().trimmed();
             QString moduleName = atom->string().mid(atom->string().indexOf("classesbymodule") + 15).trimmed();
             QDocDatabase* qdb = QDocDatabase::qdocDB();
-            DocNode* dn = qdb->findModule(moduleName);
-            if (dn) {
+            ModuleNode* mn = qdb->findModule(moduleName);
+            if (mn) {
                 NodeMap m;
-                dn->getMemberClasses(m);
+                mn->getMemberClasses(m);
                 if (!m.isEmpty()) {
                     generateAnnotatedList(relative, marker, m);
                 }
@@ -1084,9 +1072,11 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
             generateAnnotatedList(relative, marker, qdb_->getNamespaces());
         }
         else if (atom->string() == "related") {
-            const DocNode *dn = static_cast<const DocNode *>(relative);
-            if (dn)
-                generateAnnotatedList(dn, marker, dn->members());
+            if (relative && relative->isCollectionNode()) {
+                const CollectionNode* cn = static_cast<const CollectionNode *>(relative);
+                if (cn)
+                    generateAnnotatedList(cn, marker, cn->members());
+            }
         }
         break;
     case Atom::SinceList:
@@ -1105,10 +1095,8 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
             while (n != nsmap.constEnd()) {
                 const Node* node = n.value();
                 switch (node->type()) {
-                case Node::Document:
-                    if (node->subType() == Node::QmlClass) {
-                        sections[QmlClass].appendMember((Node*)node);
-                    }
+                case Node::QmlType:
+                    sections[QmlClass].appendMember((Node*)node);
                     break;
                 case Node::Namespace:
                     sections[Namespace].appendMember((Node*)node);
@@ -1255,8 +1243,7 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
                 images.append(QLatin1Char('/'));
             fileName = images + atom->string();
         }
-        if (relative && (relative->type() == Node::Document) &&
-                (relative->subType() == Node::Example)) {
+        if (relative && relative->isExample()) {
             const ExampleNode* cen = static_cast<const ExampleNode*>(relative);
             if (cen->imageFileName().isEmpty()) {
                 ExampleNode* en = const_cast<ExampleNode*>(cen);
@@ -1311,13 +1298,11 @@ int DitaXmlGenerator::generateAtom(const Atom *atom,
     case Atom::Link:
         {
             const Node *node = 0;
-            QString myLink = getLink(atom, relative, &node);
-            if (myLink.isEmpty())
-                myLink = getCollisionLink(atom);
-            if (myLink.isEmpty() && !noLinkErrors())
+            QString link = getLink(atom, relative, &node);
+            if (link.isEmpty() && !noLinkErrors())
                 relative->doc().location().warning(tr("Can't link to '%1'").arg(atom->string()));
             else if (!inSectionHeading_)
-                beginLink(myLink);
+                beginLink(link);
             skipAhead = 1;
         }
         break;
@@ -2051,7 +2036,7 @@ DitaXmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
         generateLowStatusMembers(inner,marker,CodeMarker::Compat);
         writeEndTag(); // </cxxClass>
     }
-    else if ((inner->type() == Node::Document) && (inner->subType() == Node::HeaderFile)) {
+    else if (inner->isHeaderFile()) {
         const DocNode* dn = const_cast<DocNode*>(static_cast<const DocNode*>(inner));
         rawTitle = inner->plainName();
         fullTitle = inner->plainFullName();
@@ -2167,7 +2152,7 @@ DitaXmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
         generateLowStatusMembers(inner,marker,CodeMarker::Compat);
         writeEndTag(); // </cxxClass>
     }
-    else if ((inner->type() == Node::Document) && (inner->subType() == Node::QmlClass)) {
+    else if (inner->isQmlType()) {
         QmlClassNode* qcn = const_cast<QmlClassNode*>(static_cast<const QmlClassNode*>(inner));
         ClassNode* cn = qcn->classNode();
         rawTitle = inner->plainName();
@@ -2216,6 +2201,36 @@ DitaXmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
 }
 
 /*!
+  Generate the DITA page for a qdoc file that doesn't map
+  to an underlying c++ file.
+ */
+void DitaXmlGenerator::generateQmlBasicTypePage(QmlBasicTypeNode* qbtn, CodeMarker* marker)
+{
+    QList<Section> sections;
+    QList<Section>::const_iterator s;
+    QString fullTitle = "QML Basic Type: " + qbtn->fullTitle();
+
+    generateHeader(qbtn, fullTitle);
+    generateBrief(qbtn, marker); // <shortdesc>
+    writeProlog(qbtn);
+
+    writeStartTag(DT_body);
+    enterSection(QString(), QString());
+
+    if (!qbtn->doc().isEmpty()) {
+        generateBody(qbtn, marker);
+        generateAlsoList(qbtn, marker);
+    }
+    leaveSection(); // </section>
+    if (!writeEndTag()) { // </body>
+        qbtn->doc().location().warning(tr("Pop of empty XML tag stack; generating DITA for '%1'").arg(qbtn->name()));
+        return;
+    }
+    writeRelatedLinks(qbtn);
+    writeEndTag(); // </topic>
+}
+
+/*!
   Write a list item for a \a link with the given \a text.
  */
 void DitaXmlGenerator::writeXrefListItem(const QString& link, const QString& text)
@@ -2250,37 +2265,12 @@ void DitaXmlGenerator::generateDocNode(DocNode* dn, CodeMarker* marker)
     QList<Section>::const_iterator s;
     QString fullTitle = dn->fullTitle();
 
-    if (dn->subType() == Node::QmlBasicType) {
-        fullTitle = "QML Basic Type: " + fullTitle;
-    }
-    else if (dn->subType() == Node::Collision) {
-        fullTitle = "Name Collision: " + fullTitle;
-    }
-
     generateHeader(dn, fullTitle);
     generateBrief(dn, marker); // <shortdesc>
     writeProlog(dn);
 
     writeStartTag(DT_body);
     enterSection(QString(), QString());
-    if (dn->subType() == Node::Module) {
-        generateStatus(dn, marker);
-        NodeMap nm;
-        dn->getMemberNamespaces(nm);
-        if (!nm.isEmpty()) {
-            enterSection("h2","Namespaces");
-            generateAnnotatedList(dn, marker, nm);
-            leaveSection();
-        }
-        nm.clear();
-        dn->getMemberClasses(nm);
-        if (!nm.isEmpty()) {
-            enterSection("h2","Classes");
-            generateAnnotatedList(dn, marker, nm);
-            leaveSection();
-        }
-        nm.clear();
-    }
 
     if (dn->doc().isEmpty()) {
         if (dn->subType() == Node::File) {
@@ -2299,23 +2289,70 @@ void DitaXmlGenerator::generateDocNode(DocNode* dn, CodeMarker* marker)
         }
     }
     else {
-        if (dn->subType() == Node::Module) {
+        generateBody(dn, marker);
+        generateAlsoList(dn, marker);
+    }
+    leaveSection(); // </section>
+    if (!writeEndTag()) { // </body>
+        dn->doc().location().warning(tr("Pop of empty XML tag stack; generating DITA for '%1'").arg(dn->name()));
+        return;
+    }
+    writeRelatedLinks(dn);
+    writeEndTag(); // </topic>
+}
+
+/*!
+  Generate the DITA XML file for a group, module, or QML module.
+ */
+void DitaXmlGenerator::generateCollectionNode(CollectionNode* cn, CodeMarker* marker)
+{
+    QList<Section> sections;
+    QList<Section>::const_iterator s;
+    QString fullTitle = cn->fullTitle();
+
+    generateHeader(cn, fullTitle);
+    generateBrief(cn, marker); // <shortdesc>
+    writeProlog(cn);
+
+    writeStartTag(DT_body);
+    enterSection(QString(), QString());
+    if (cn->isModule()) {
+        generateStatus(cn, marker);
+        NodeMap nm;
+        cn->getMemberNamespaces(nm);
+        if (!nm.isEmpty()) {
+            enterSection("h2","Namespaces");
+            generateAnnotatedList(cn, marker, nm);
+            leaveSection();
+        }
+        nm.clear();
+        cn->getMemberClasses(nm);
+        if (!nm.isEmpty()) {
+            enterSection("h2","Classes");
+            generateAnnotatedList(cn, marker, nm);
+            leaveSection();
+        }
+        nm.clear();
+    }
+
+    if (!cn->doc().isEmpty()) {
+        if (cn->isModule()) {
             enterSection(QString(), QString());
-            generateBody(dn, marker);
+            generateBody(cn, marker);
             leaveSection();
         }
         else {
-            generateBody(dn, marker);
+            generateBody(cn, marker);
         }
-        generateAlsoList(dn, marker);
-        generateAnnotatedList(dn, marker, dn->members());
+        generateAlsoList(cn, marker);
+        generateAnnotatedList(cn, marker, cn->members());
     }
     leaveSection(); // </section>
     if (!writeEndTag()) { // </body>
-        dn->doc().location().warning(tr("Pop of empty XML tag stack; generating DITA for '%1'").arg(dn->name()));
+        cn->doc().location().warning(tr("Pop of empty XML tag stack; generating DITA for '%1'").arg(cn->name()));
         return;
     }
-    writeRelatedLinks(dn);
+    writeRelatedLinks(cn);
     writeEndTag(); // </topic>
 }
 
@@ -2350,7 +2387,7 @@ void DitaXmlGenerator::writeLink(const Node* node,
   value of the \e role attribute is \c{parent} for the
   \c{start} link.
  */
-void DitaXmlGenerator::writeRelatedLinks(const DocNode* node)
+void DitaXmlGenerator::writeRelatedLinks(const Node* node)
 {
     const Node* linkNode = 0;
     QPair<QString,QString> linkPair;
@@ -2361,7 +2398,7 @@ void DitaXmlGenerator::writeRelatedLinks(const DocNode* node)
             linkNode = qdb_->findNodeForTarget(linkPair.first, node);
             if (!linkNode)
                 node->doc().location().warning(tr("Cannot link to '%1'").arg(linkPair.first));
-            if (linkNode && linkNode->type() == Node::Document) {
+            if (linkNode && linkNode->isDocNode()) {
                 const DocNode *docNode = static_cast<const DocNode*>(linkNode);
                 linkPair.second = docNode->title();
             }
@@ -2372,7 +2409,7 @@ void DitaXmlGenerator::writeRelatedLinks(const DocNode* node)
             linkNode = qdb_->findNodeForTarget(linkPair.first, node);
             if (!linkNode)
                 node->doc().location().warning(tr("Cannot link to '%1'").arg(linkPair.first));
-            if (linkNode && linkNode->type() == Node::Document) {
+            if (linkNode && linkNode->isDocNode()) {
                 const DocNode *docNode = static_cast<const DocNode*>(linkNode);
                 linkPair.second = docNode->title();
             }
@@ -2383,7 +2420,7 @@ void DitaXmlGenerator::writeRelatedLinks(const DocNode* node)
             linkNode = qdb_->findNodeForTarget(linkPair.first, node);
             if (!linkNode)
                 node->doc().location().warning(tr("Cannot link to '%1'").arg(linkPair.first));
-            if (linkNode && linkNode->type() == Node::Document) {
+            if (linkNode && linkNode->isDocNode()) {
                 const DocNode *docNode = static_cast<const DocNode*>(linkNode);
                 linkPair.second = docNode->title();
             }
@@ -2405,12 +2442,9 @@ QString DitaXmlGenerator::fileExtension() const
   Writes an XML file header to the current XML stream. This
   depends on which kind of DITA XML file is being generated,
   which is determined by the \a node type and subtype and the
-  \a subpage flag. If the \subpage flag is true, a \c{<topic>}
-  header is written, regardless of the type of \a node.
+  \a subpage flag.
  */
-void DitaXmlGenerator::generateHeader(const Node* node,
-                                      const QString& name,
-                                      bool subpage)
+void DitaXmlGenerator::generateHeader(const Node* node, const QString& name)
 {
     if (!node)
         return;
@@ -2423,7 +2457,7 @@ void DitaXmlGenerator::generateHeader(const Node* node,
     QString version;
     QString outputclass;
 
-    if (node->type() == Node::Class) {
+    if (node->isClass()) {
         mainTag = DT_cxxClass;
         nameTag = DT_apiName;
         dtd = "dtd/cxxClass.dtd";
@@ -2432,7 +2466,7 @@ void DitaXmlGenerator::generateHeader(const Node* node,
                 " PUBLIC \"-//NOKIA//DTD DITA C++ API Class Reference Type v" +
                 version + "//EN\" \"" + dtd + "\">";
     }
-    else if (node->type() == Node::Namespace) {
+    else if (node->isNamespace()) {
         mainTag = DT_cxxClass;
         nameTag = DT_apiName;
         dtd = "dtd/cxxClass.dtd";
@@ -2442,8 +2476,28 @@ void DitaXmlGenerator::generateHeader(const Node* node,
                 version + "//EN\" \"" + dtd + "\">";
         outputclass = "namespace";
     }
-    else if (node->type() == Node::Document || subpage) {
-        if (node->subType() == Node::HeaderFile) {
+    else if (node->isCollectionNode()) {
+        mainTag = DT_topic;
+        nameTag = DT_title;
+        dtd = "dtd/topic.dtd";
+        doctype = "<!DOCTYPE " + ditaTags[mainTag] +
+                " PUBLIC \"-//OASIS//DTD DITA Topic//EN\" \"" + dtd + "\">";
+        switch (node->type()) {
+            case Node::Group:
+                outputclass = "group";
+                break;
+            case Node::Module:
+                outputclass = "module";
+                break;
+            case Node::QmlModule:
+                outputclass = "qmlmodule";
+                break;
+            default:
+                outputclass = "page";
+        }
+    }
+    else if (node->isDocNode()) {
+        if (node->isHeaderFile()) {
             mainTag = DT_cxxClass;
             nameTag = DT_apiName;
             dtd = "dtd/cxxClass.dtd";
@@ -2453,7 +2507,7 @@ void DitaXmlGenerator::generateHeader(const Node* node,
                     version + "//EN\" \"" + dtd + "\">";
             outputclass = "headerfile";
         }
-        else if (node->subType() == Node::QmlClass) {
+        else if (node->isQmlType()) {
             mainTag = DT_qmlType;
             nameTag = DT_apiName;
             dtd = "dtd/qmlType.dtd";
@@ -2473,9 +2527,6 @@ void DitaXmlGenerator::generateHeader(const Node* node,
             case Node::Page:
                 outputclass = node->pageTypeString();
                 break;
-            case Node::Group:
-                outputclass = "group";
-                break;
             case Node::Example:
                 outputclass = "example";
                 break;
@@ -2485,15 +2536,9 @@ void DitaXmlGenerator::generateHeader(const Node* node,
             case Node::Image:  // not used
                 outputclass = "image";
                 break;
-            case Node::Module:
-                outputclass = "module";
-                break;
             case Node::ExternalPage: // not used
                 outputclass = "externalpage";
                 break;
-            case Node::Collision:
-                outputclass = "collision";
-                break;
             default:
                 outputclass = "page";
             }
@@ -2696,8 +2741,8 @@ void DitaXmlGenerator::generateClassHierarchy(const Node* relative, NodeMap& cla
 
             NodeMap newTop;
             foreach (const RelatedClass &d, child->derivedClasses()) {
-                if (d.access != Node::Private && !d.node->doc().isEmpty())
-                    newTop.insert(d.node->name(), d.node);
+                if (d.node_ && d.access_ != Node::Private && !d.node_->doc().isEmpty())
+                    newTop.insert(d.node_->name(), d.node_);
             }
             if (!newTop.isEmpty()) {
                 stack.push(newTop);
@@ -2763,7 +2808,7 @@ void DitaXmlGenerator::generateAnnotatedList(const Node* relative,
         writeEndTag(); // </p>
         writeEndTag(); // <entry>
 
-        if (!(node->type() == Node::Document)) {
+        if (!node->isDocNode()) {
             Text brief = node->doc().trimmedBriefText(node->name());
             if (!brief.isEmpty()) {
                 writeStartTag(DT_entry);
@@ -2985,7 +3030,7 @@ void DitaXmlGenerator::generateCompactList(ListType , // currently not needed fo
             writeHrefAttribute(linkForNode(it.value(), relative));
 
             QStringList pieces;
-            if (it.value()->subType() == Node::QmlClass)
+            if (it.value()->isQmlType())
                 pieces << it.value()->name();
             else
                 pieces = it.value()->fullName(relative).split("::");
@@ -3106,100 +3151,57 @@ void DitaXmlGenerator::generateQmlItem(const Node* node,
  */
 void DitaXmlGenerator::generateOverviewList(const Node* relative)
 {
-    QMap<const DocNode*, QMap<QString, DocNode*> > docNodeMap;
-    QMap<QString, const DocNode*> groupTitlesMap;
-    QMap<QString, DocNode*> uncategorizedNodeMap;
+    CNMap groups;
+    CNMap modules;
+    CNMap qmlModules;
     QRegExp singleDigit("\\b([0-9])\\b");
 
-    const NodeList children = qdb_->treeRoot()->childNodes();
-    foreach (Node* child, children) {
-        if (child->type() == Node::Document && child != relative) {
-            DocNode* docNode = static_cast<DocNode*>(child);
-
-            // Check whether the page is part of a group or is the group
-            // definition page.
-            QString group;
-            bool isGroupPage = false;
-            if (docNode->doc().metaCommandsUsed().contains("group")) {
-                group = docNode->doc().metaCommandArgs("group")[0].first;
-                isGroupPage = true;
-            }
-
-            // there are too many examples; they would clutter the list
-            if (docNode->subType() == Node::Example)
-                continue;
-
-            // not interested either in individual (Qt Designer etc.) manual chapters
-            if (docNode->links().contains(Node::ContentsLink))
-                continue;
-
-            // Discard external nodes.
-            if (docNode->subType() == Node::ExternalPage)
-                continue;
-
-            QString sortKey = docNode->fullTitle().toLower();
-            if (sortKey.startsWith("the "))
-                sortKey.remove(0, 4);
-            sortKey.replace(singleDigit, "0\\1");
-
-            if (!group.isEmpty()) {
-                if (isGroupPage) {
-                    // If we encounter a group definition page, we add all
-                    // the pages in that group to the list for that group.
-                    foreach (Node* member, docNode->members()) {
-                        if (member->isInternal() || member->type() != Node::Document)
-                            continue;
-                        DocNode* page = static_cast<DocNode*>(member);
-                        if (page) {
-                            QString sortKey = page->fullTitle().toLower();
-                            if (sortKey.startsWith("the "))
-                                sortKey.remove(0, 4);
-                            sortKey.replace(singleDigit, "0\\1");
-                            docNodeMap[const_cast<const DocNode*>(docNode)].insert(sortKey, page);
-                            groupTitlesMap[docNode->fullTitle()] = const_cast<const DocNode*>(docNode);
-                        }
-                    }
-                }
-                else if (!isGroupPage) {
-                    // If we encounter a page that belongs to a group then
-                    // we add that page to the list for that group.
-                    const DocNode* gn = qdb_->getGroup(group);
-                    if (gn && !docNode->isInternal())
-                        docNodeMap[gn].insert(sortKey, docNode);
-                }
-            }
-        }
-    }
-
-    // We now list all the pages found that belong to groups.
-    // If only certain pages were found for a group, but the definition page
-    // for that group wasn't listed, the list of pages will be intentionally
-    // incomplete. However, if the group definition page was listed, all the
-    // pages in that group are listed for completeness.
+    qdb_->mergeCollections(Node::Group, groups, relative);
+    qdb_->mergeCollections(Node::Module, modules, relative);
+    qdb_->mergeCollections(Node::QmlModule, qmlModules, relative);
 
-    if (!docNodeMap.isEmpty()) {
-        foreach (const QString& groupTitle, groupTitlesMap.keys()) {
-            const DocNode* groupNode = groupTitlesMap[groupTitle];
+    QStringList keys = groups.uniqueKeys();
+    foreach (QString key, keys) {
+        GroupNode* gn = static_cast<GroupNode*>(groups.value(key));
+        if (gn) {
             writeStartTag(DT_p);
             xmlWriter().writeAttribute("outputclass","h3");
             writeStartTag(DT_xref);
             // formathtml
-            xmlWriter().writeAttribute("href",linkForNode(groupNode, relative));
-            writeCharacters(protectEnc(groupNode->fullTitle()));
+            xmlWriter().writeAttribute("href",linkForNode(gn, relative));
+            writeCharacters(protectEnc(gn->fullTitle()));
             writeEndTag(); // </xref>
             writeEndTag(); // </p>
-            if (docNodeMap[groupNode].count() == 0)
+
+            if (gn->members().isEmpty())
                 continue;
 
+            NodeMap nm;
+            foreach (Node* member, gn->members()) {
+                if (member->isInternal() || member->isExample() || member->isExternalPage() ||
+                    member->isObsolete())
+                    continue;
+                // not interested either in individual (Qt Designer etc.) manual chapters
+                if (member->links().contains(Node::ContentsLink))
+                    continue;
+                QString sortKey = member->fullTitle().toLower();
+                if (sortKey.startsWith("the "))
+                    sortKey.remove(0, 4);
+                sortKey.replace(singleDigit, "0\\1");
+                nm.insert(sortKey, member);
+            }
+
             writeStartTag(DT_ul);
-            foreach (const DocNode* docNode, docNodeMap[groupNode]) {
-                QString title = docNode->fullTitle();
+            QStringList titles = nm.keys();
+            foreach (QString t, titles) {
+                Node* member = nm.value(t);
+                QString title = member->fullTitle();
                 if (title.startsWith("The "))
                     title.remove(0, 4);
                 writeStartTag(DT_li);
                 writeStartTag(DT_xref);
                 // formathtml
-                xmlWriter().writeAttribute("href",linkForNode(docNode, relative));
+                xmlWriter().writeAttribute("href",linkForNode(member, relative));
                 writeCharacters(protectEnc(title));
                 writeEndTag(); // </xref>
                 writeEndTag(); // </li>
@@ -3207,27 +3209,6 @@ void DitaXmlGenerator::generateOverviewList(const Node* relative)
             writeEndTag(); // </ul>
         }
     }
-
-    if (!uncategorizedNodeMap.isEmpty()) {
-        writeStartTag(DT_p);
-        xmlWriter().writeAttribute("outputclass","h3");
-        xmlWriter().writeCharacters("Miscellaneous");
-        writeEndTag(); // </p>
-        writeStartTag(DT_ul);
-        foreach (const DocNode *docNode, uncategorizedNodeMap) {
-            QString title = docNode->fullTitle();
-            if (title.startsWith("The "))
-                title.remove(0, 4);
-            writeStartTag(DT_li);
-            writeStartTag(DT_xref);
-            // formathtml
-            xmlWriter().writeAttribute("href",linkForNode(docNode, relative));
-            writeCharacters(protectEnc(title));
-            writeEndTag(); // </xref>
-            writeEndTag(); // </li>
-        }
-        writeEndTag(); // </ul>
-    }
 }
 
 /*!
@@ -3412,68 +3393,71 @@ void DitaXmlGenerator::writeText(const QString& markedCode, const Node* relative
             for (int k = 0; k != 6; ++k) {
                 if (parseArg(src, markTags[k], &i, n, &arg, &par1)) {
                     const Node* n = 0;
-                    if (k == 0) { // <@link>
-                        if (!text.isEmpty()) {
-                            writeCharacters(text);
-                            text.clear();
-                        }
-                        n = CodeMarker::nodeForString(par1.toString());
-                        QString link = linkForNode(n, relative);
-                        addLink(link, arg);
-                    }
-                    else if (k == 4) { // <@param>
-                        if (!text.isEmpty()) {
-                            writeCharacters(text);
-                            text.clear();
-                        }
-                        writeStartTag(DT_i);
-                        //writeCharacters(" " + arg.toString());
-                        writeCharacters(arg.toString());
-                        writeEndTag(); // </i>
-                    }
-                    else if (k == 5) { // <@extra>
-                        if (!text.isEmpty()) {
-                            writeCharacters(text);
-                            text.clear();
-                        }
-                        writeStartTag(DT_tt);
-                        writeCharacters(arg.toString());
-                        writeEndTag(); // </tt>
-                    }
-                    else {
-                        if (!text.isEmpty()) {
-                            writeCharacters(text);
-                            text.clear();
-                        }
-                        par1 = QStringRef();
-                        QString link;
-                        n = qdb_->resolveTarget(arg.toString(), relative);
-                        if (n && n->subType() == Node::QmlBasicType) {
-                            if (relative && relative->subType() == Node::QmlClass) {
-                                link = linkForNode(n,relative);
-                                addLink(link, arg);
+                    switch (k) {
+                        case 0: // <@link>
+                            if (!text.isEmpty()) {
+                                writeCharacters(text);
+                                text.clear();
                             }
-                            else {
-                                writeCharacters(arg.toString());
+                            n = CodeMarker::nodeForString(par1.toString());
+                            addLink(linkForNode(n, relative), arg);
+                            break;
+                        case 4: // <@param>
+                            if (!text.isEmpty()) {
+                                writeCharacters(text);
+                                text.clear();
                             }
-                        }
-                        else {
-                            // (zzz) Is this correct for all cases?
-                            link = linkForNode(n,relative);
-                            addLink(link, arg);
-                        }
-                    }
+                            writeStartTag(DT_i);
+                            //writeCharacters(" " + arg.toString());
+                            writeCharacters(arg.toString());
+                            writeEndTag(); // </i>
+                            break;
+                        case 5: // <@extra>
+                            if (!text.isEmpty()) {
+                                writeCharacters(text);
+                                text.clear();
+                            }
+                            writeStartTag(DT_tt);
+                            writeCharacters(arg.toString());
+                            writeEndTag(); // </tt>
+                            break;
+                        case 3:
+                            if (!text.isEmpty()) {
+                                writeCharacters(text);
+                                text.clear();
+                            }
+                            par1 = QStringRef();
+                            n = qdb_->findFunctionNode(arg.toString(), relative, Node::DontCare);
+                            addLink(linkForNode(n, relative), arg);
+                            break;
+                        case 1:
+                        case 2:
+                        default:
+                            if (!text.isEmpty()) {
+                                writeCharacters(text);
+                                text.clear();
+                            }
+                            par1 = QStringRef();
+                            n = qdb_->findTypeNode(arg.toString(), relative);
+                            if (n && n->isQmlBasicType()) {
+                                if (relative && relative->isQmlType())
+                                    addLink(linkForNode(n, relative), arg);
+                                else
+                                    writeCharacters(arg.toString());
+                            }
+                            else
+                                addLink(linkForNode(n, relative), arg); // (zzz) Is this correct for all cases?
+                            break;
+                    } // switch
                     break;
                 }
             }
         }
-        else {
+        else
             text += src.at(i++);
-        }
     }
-    if (!text.isEmpty()) {
+    if (!text.isEmpty())
         writeCharacters(text);
-    }
 }
 
 void DitaXmlGenerator::generateLink(const Atom* atom, CodeMarker* marker)
@@ -3703,13 +3687,12 @@ QString DitaXmlGenerator::guidForNode(const Node* node)
 
 /*!
   Constructs a file name appropriate for the \a node and returns
-  it. If the \a node is not a fake node, or if it is a fake node but
-  it is neither an external page node nor an image node or a ditamap,
-  call the Generator::fileName() function.
+  it. If the \a node is not a not an external page, an image, or
+  a ditamap, call fileName() in the base class, Generator.
  */
 QString DitaXmlGenerator::fileName(const Node* node)
 {
-    if (node->type() == Node::Document) {
+    if (node->isDocNode()) {
         if (static_cast<const DocNode*>(node)->pageType() == Node::DitaMapPage)
             return node->name();
         if (static_cast<const DocNode*>(node)->subType() == Node::ExternalPage)
@@ -3720,6 +3703,103 @@ QString DitaXmlGenerator::fileName(const Node* node)
     return Generator::fileName(node);
 }
 
+/*!
+  This function is called for links, i.e. for words that
+  are marked with the qdoc link command. For autolinks
+  that are not marked with the qdoc link command, qdoc
+  calls getAutoLink().
+
+  Return the link represented by the \a atom, and set \a node
+  to point to the target node for that link. \a relative points
+  to the node holding the qdoc comment where the link command
+  was found.
+ */
+QString DitaXmlGenerator::getLink(const Atom *atom, const Node *relative, const Node** node)
+{
+    const QString& t = atom->string();
+    if (t.at(0) == QChar('h')) {
+        if (t.startsWith("http:") || t.startsWith("https:"))
+            return t;
+    }
+    else if (t.at(0) == QChar('f')) {
+        if (t.startsWith("file:") || t.startsWith("ftp:"))
+            return t;
+    }
+    else if (t.at(0) == QChar('m')) {
+        if (t.startsWith("mailto:"))
+            return t;
+    }
+
+    QString ref;
+
+    *node = qdb_->findNodeForAtom(atom, relative, ref);
+    if (!(*node))
+        return QString();
+
+    QString url = (*node)->url();
+    if (!url.isEmpty()) {
+        if (ref.isEmpty())
+            return url;
+        int hashtag = url.lastIndexOf(QChar('#'));
+        if (hashtag != -1)
+            url.truncate(hashtag);
+        return url + "#" + ref;
+    }
+    /*
+      Given that *node is not null, we now cconstruct a link
+      to the page that *node represents, and then if we found
+      a target on that page, we connect the target to the link
+      with '#'.
+    */
+    QString link = linkForNode(*node, relative);
+    if (*node && (*node)->subType() == Node::Image)
+        link = "images/used-in-examples/" + link;
+    if (!ref.isEmpty()) {
+        int hashtag = link.lastIndexOf(QChar('#'));
+        if (hashtag != -1)
+            link.truncate(hashtag);
+        link += QLatin1Char('#') + ref;
+    }
+    return link;
+}
+
+/*!
+  This function is called for autolinks, i.e. for words that
+  are not marked with the qdoc link command that qdoc has
+  reason to believe should be links. For links marked with
+  the qdoc link command, qdoc calls getLink().
+
+  Return the link represented by the \a atom, and set \a node
+  to point to the target node for that link. \a relative points
+  to the node holding the qdoc comment where the link command
+  was found.
+ */
+QString DitaXmlGenerator::getAutoLink(const Atom *atom, const Node *relative, const Node** node)
+{
+    QString ref;
+    QString link;
+
+    *node = qdb_->findNodeForAtom(atom, relative, ref);
+    if (!(*node))
+        return QString();
+
+    QString url = (*node)->url();
+    if (!url.isEmpty()) {
+        if (ref.isEmpty())
+            return url;
+        int hashtag = url.lastIndexOf(QChar('#'));
+        if (hashtag != -1)
+            url.truncate(hashtag);
+        return url + "#" + ref;
+    }
+
+    link = linkForNode(*node, relative);
+    if (!ref.isEmpty())
+        link += QLatin1Char('#') + ref;
+    return link;
+}
+
+
 QString DitaXmlGenerator::linkForNode(const Node* node, const Node* relative)
 {
     if (node == 0 || node == relative)
@@ -3733,7 +3813,7 @@ QString DitaXmlGenerator::linkForNode(const Node* node, const Node* relative)
 
     QString fn = fileName(node);
     if (node && relative && node->parent() != relative) {
-        if (node->parent()->subType() == Node::QmlClass && relative->subType() == Node::QmlClass) {
+        if (node->parent()->isQmlType() && relative->isQmlType()) {
             if (node->parent()->isAbstract()) {
                 /*
                   This is a bit of a hack. What we discover with
@@ -3796,6 +3876,7 @@ int DitaXmlGenerator::hOffset(const Node* node)
     case Node::Namespace:
     case Node::Class:
         return 2;
+    case Node::QmlType:
     case Node::Document:
         return 1;
     case Node::Enum:
@@ -3829,103 +3910,6 @@ const QPair<QString,QString> DitaXmlGenerator::anchorForNode(const Node* node)
     return anchorPair;
 }
 
-QString DitaXmlGenerator::getLink(const Atom* atom, const Node* relative, const Node** node)
-{
-    QString link;
-    *node = 0;
-    inObsoleteLink = false;
-
-    if (atom->string().contains(QLatin1Char(':')) &&
-            (atom->string().startsWith("file:")
-             || atom->string().startsWith("http:")
-             || atom->string().startsWith("https:")
-             || atom->string().startsWith("ftp:")
-             || atom->string().startsWith("mailto:"))) {
-
-        link = atom->string();
-    }
-    else {
-        QStringList path;
-        if (atom->string().contains('#'))
-            path = atom->string().split('#');
-        else
-            path.append(atom->string());
-
-        QString ref;
-        QString first = path.first().trimmed();
-
-        if (first.isEmpty()) {
-            *node = relative;
-        }
-        else if (first.endsWith(".html")) {
-            *node = qdb_->treeRoot()->findChildNodeByNameAndType(first, Node::Document);
-        }
-        else {
-            *node = qdb_->resolveTarget(first, relative);
-            if (!*node)
-                *node = qdb_->findDocNodeByTitle(first, relative);
-            if (!*node)
-                *node = qdb_->findUnambiguousTarget(first, ref, relative);
-        }
-
-        if (*node) {
-            if (!(*node)->url().isEmpty())
-                return (*node)->url();
-            else
-                path.removeFirst();
-        }
-        else
-            *node = relative;
-
-        if (*node && (*node)->status() == Node::Obsolete) {
-            if (relative && (relative->parent() != *node) &&
-                    (relative->status() != Node::Obsolete)) {
-                bool porting = false;
-                if (relative->type() == Node::Document) {
-                    const DocNode* fake = static_cast<const DocNode*>(relative);
-                    if (fake->title().startsWith("Porting"))
-                        porting = true;
-                }
-                QString name = relative->plainFullName();
-                if (!porting && !name.startsWith("Q3")) {
-                    if (obsoleteLinks) {
-                        relative->doc().location().warning(tr("Link to obsolete item '%1' in %2")
-                                                           .arg(atom->string())
-                                                           .arg(name));
-                    }
-                    inObsoleteLink = true;
-                }
-            }
-        }
-
-        while (!path.isEmpty()) {
-            ref = qdb_->findTarget(path.first(), *node);
-            if (ref.isEmpty())
-                break;
-            path.removeFirst();
-        }
-
-        if (path.isEmpty()) {
-            link = linkForNode(*node, relative);
-            if (*node && (*node)->subType() == Node::Image)
-                link = "images/used-in-examples/" + link;
-            if (!ref.isEmpty()) {
-                if (link.isEmpty())
-                    link = outFileName();
-                QString guid = lookupGuid(link, ref);
-                link += QLatin1Char('#') + guid;
-            }
-            else if (!link.isEmpty() && *node && (link.endsWith(".xml") || link.endsWith(".dita"))) {
-                link += QLatin1Char('#') + (*node)->guid();
-            }
-        }
-    }
-    if (!link.isEmpty() && link[0] == '#') {
-        link.prepend(outFileName());
-    }
-    return link;
-}
-
 void DitaXmlGenerator::generateStatus(const Node* node, CodeMarker* marker)
 {
     Text text;
@@ -3936,40 +3920,7 @@ void DitaXmlGenerator::generateStatus(const Node* node, CodeMarker* marker)
             Generator::generateStatus(node, marker);
         break;
     case Node::Compat:
-        if (node->isInnerNode()) {
-            text << Atom::ParaLeft
-                 << Atom(Atom::FormattingLeft,ATOM_FORMATTING_BOLD)
-                 << "This "
-                 << typeString(node)
-                 << " is part of the Qt 3 support library."
-                 << Atom(Atom::FormattingRight, ATOM_FORMATTING_BOLD)
-                 << " It is provided to keep old source code working. "
-                 << "We strongly advise against "
-                 << "using it in new code. See ";
-
-            const DocNode *docNode = qdb_->findDocNodeByTitle("Porting To Qt 4");
-            QString ref;
-            if (docNode && node->type() == Node::Class) {
-                QString oldName(node->name());
-                oldName.remove(QLatin1Char('3'));
-                ref = qdb_->findTarget(oldName,docNode);
-            }
-
-            if (!ref.isEmpty()) {
-                QString fn = fileName(docNode);
-                QString guid = lookupGuid(fn, ref);
-                text << Atom(Atom::GuidLink, fn + QLatin1Char('#') + guid);
-            }
-            else
-                text << Atom(Atom::Link, "Porting to Qt 4");
-
-            text << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
-                 << Atom(Atom::String, "Porting to Qt 4")
-                 << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK)
-                 << " for more information."
-                 << Atom::ParaRight;
-        }
-        generateText(text, node, marker);
+        // Porting to Qt 4 no longer supported
         break;
     default:
         Generator::generateStatus(node, marker);
@@ -4050,7 +4001,7 @@ void DitaXmlGenerator::startQmlProperty(QmlPropertyNode* qpn,
     writeStartTag(DT_qmlPropertyDetail);
     writeStartTag(DT_qmlPropertyDef);
     if (!qpn->isReadOnlySet())
-        qpn->setReadOnly(!qpn->isWritable(qdb_));
+        qpn->setReadOnly(!qpn->isWritable());
     if (qpn->isReadOnly()) {
         writeStartTag(DT_qmlQualifier);
         xmlWriter().writeAttribute("name","read-only");
@@ -4187,11 +4138,11 @@ void DitaXmlGenerator::generateQmlModuleDef(QmlClassNode* qcn)
   Output the "Inherits" line for the QML element,
   if there should be one.
  */
-void DitaXmlGenerator::generateQmlInherits(const QmlClassNode* qcn, CodeMarker* marker)
+void DitaXmlGenerator::generateQmlInherits(QmlClassNode* qcn, CodeMarker* marker)
 {
     if (!qcn)
         return;
-    const QmlClassNode* base = qcn->qmlBaseNode();
+    QmlClassNode* base = qcn->qmlBaseNode();
     while (base && base->isInternal()) {
         base = base->qmlBaseNode();
     }
@@ -4365,25 +4316,27 @@ void DitaXmlGenerator::writeDerivations(const ClassNode* cn)
         writeStartTag(DT_cxxClassDerivations);
         r = cn->baseClasses().constBegin();
         while (r != cn->baseClasses().constEnd()) {
-            writeStartTag(DT_cxxClassDerivation);
-            writeStartTag(DT_cxxClassDerivationAccessSpecifier);
-            xmlWriter().writeAttribute("value",(*r).accessString());
-            writeEndTag(); // </cxxClassDerivationAccessSpecifier>
-
-            // not included: <cxxClassDerivationVirtual>
+            ClassNode* bcn = (*r).node_;
+            if (bcn) {
+                writeStartTag(DT_cxxClassDerivation);
+                writeStartTag(DT_cxxClassDerivationAccessSpecifier);
+                xmlWriter().writeAttribute("value",(*r).accessString());
+                writeEndTag(); // </cxxClassDerivationAccessSpecifier>
 
-            writeStartTag(DT_cxxClassBaseClass);
-            QString attr = fileName((*r).node) + QLatin1Char('#') + (*r).node->guid();
-            xmlWriter().writeAttribute("href",attr);
-            writeCharacters((*r).node->plainFullName());
-            writeEndTag(); // </cxxClassBaseClass>
+                // not included: <cxxClassDerivationVirtual>
 
-            // not included: <ClassBaseStruct> or <cxxClassBaseUnion>
+                writeStartTag(DT_cxxClassBaseClass);
+                QString attr = fileName(bcn) + QLatin1Char('#') + bcn->guid();
+                xmlWriter().writeAttribute("href",attr);
+                writeCharacters(bcn->plainFullName());
+                writeEndTag(); // </cxxClassBaseClass>
 
-            writeEndTag(); // </cxxClassDerivation>
+                // not included: <ClassBaseStruct> or <cxxClassBaseUnion>
 
-            // not included: <cxxStructDerivation>
+                writeEndTag(); // </cxxClassDerivation>
 
+                // not included: <cxxStructDerivation>
+            }
             ++r;
         }
         writeEndTag(); // </cxxClassDerivations>
@@ -4623,10 +4576,10 @@ void DitaXmlGenerator::replaceTypesWithLinks(const Node* n, const InnerNode* par
             }
             i += 2;
             if (parseArg(src, typeTag, &i, srcSize, &arg, &par1)) {
-                const Node* tn = qdb_->resolveTarget(arg.toString(), parent, n);
+                const Node* tn = qdb_->findTypeNode(arg.toString(), parent);
                 if (tn) {
                     //Do not generate a link from a C++ function to a QML Basic Type (such as int)
-                    if (n->type() == Node::Function && tn->subType() == Node::QmlBasicType)
+                    if (n->isFunction() && tn->isQmlBasicType())
                         writeCharacters(arg.toString());
                     else
                         addLink(linkForNode(tn,parent),arg,DT_apiRelation);
@@ -4781,12 +4734,13 @@ void DitaXmlGenerator::writeEnumerations(const Section& s,
                     }
 
                     // not included: <cxxEnumeratorAPIItemLocation>
-
+#if 0
                     if (!(*i).text().isEmpty()) {
                         writeStartTag(DT_apiDesc);
                         generateText((*i).text(), en, marker);
                         writeEndTag(); // </apiDesc>
                     }
+#endif
                     writeEndTag(); // <cxxEnumerator>
                     ++i;
                 }
@@ -5287,7 +5241,7 @@ DitaXmlGenerator::generateInnerNode(InnerNode* node)
     if (!node->url().isNull())
         return;
 
-    if (node->type() == Node::Document) {
+    if (node->isDocNode()) {
         DocNode* docNode = static_cast<DocNode*>(node);
         if (docNode->subType() == Node::ExternalPage)
             return;
@@ -5298,7 +5252,7 @@ DitaXmlGenerator::generateInnerNode(InnerNode* node)
                 qDebug("PAGE %s HAS CHILDREN", qPrintable(docNode->title()));
         }
     }
-    else if (node->type() == Node::QmlPropertyGroup)
+    else if (node->isQmlPropertyGroup())
         return;
 
     /*
@@ -5306,32 +5260,16 @@ DitaXmlGenerator::generateInnerNode(InnerNode* node)
      */
     CodeMarker *marker = CodeMarker::markerForFileName(node->location().filePath());
     if (node->parent() != 0) {
-        /*
-          Skip name collision nodes here and process them
-          later in generateCollisionPages(). Each one is
-          appended to a list for later.
-         */
-        if ((node->type() == Node::Document) && (node->subType() == Node::Collision)) {
-            NameCollisionNode* ncn = static_cast<NameCollisionNode*>(node);
-            collisionNodes.append(const_cast<NameCollisionNode*>(ncn));
-        }
-        else {
-            if (!node->name().endsWith(".ditamap"))
-                beginSubPage(node, fileName(node));
-            if (node->type() == Node::Namespace || node->type() == Node::Class) {
-                generateClassLikeNode(node, marker);
-            }
-            else if (node->type() == Node::Document) {
-                if (node->subType() == Node::HeaderFile)
-                    generateClassLikeNode(node, marker);
-                else if (node->subType() == Node::QmlClass)
-                    generateClassLikeNode(node, marker);
-                else
-                    generateDocNode(static_cast<DocNode*>(node), marker);
-            }
-            if (!node->name().endsWith(".ditamap"))
-                endSubPage();
-        }
+        if (!node->name().endsWith(".ditamap"))
+            beginSubPage(node, fileName(node));
+        if (node->isNamespace() || node->isClass() || node->isQmlType() || node->isHeaderFile())
+            generateClassLikeNode(node, marker);
+        else if (node->isDocNode())
+            generateDocNode(static_cast<DocNode*>(node), marker);
+        else if (node->isQmlBasicType())
+            generateQmlBasicTypePage(static_cast<QmlBasicTypeNode*>(node), marker);
+        if (!node->name().endsWith(".ditamap"))
+            endSubPage();
     }
 
     NodeList::ConstIterator c = node->childNodes().constBegin();
@@ -5397,13 +5335,6 @@ Node* DitaXmlGenerator::collectNodesByTypeAndSubtype(const InnerNode* parent)
     QString message;
     for (int i=0; i<children.size(); ++i) {
         Node* child = children[i];
-        if ((child->type() == Node::Document) && (child->subType() == Node::Collision)) {
-            const DocNode* fake = static_cast<const DocNode*>(child);
-            Node* n = collectNodesByTypeAndSubtype(fake);
-            if (n)
-                rootPageNode = n;
-            continue;
-        }
         if (!child || child->isInternal() || child->doc().isEmpty() || child->isIndexNode())
             continue;
 
@@ -5420,6 +5351,26 @@ Node* DitaXmlGenerator::collectNodesByTypeAndSubtype(const InnerNode* parent)
             if (!isDuplicate(nodeTypeMaps[Node::Class],child->name(),child))
                 nodeTypeMaps[Node::Class]->insert(child->name(),child);
             break;
+        case Node::QmlType:
+            if (!isDuplicate(nodeTypeMaps[Node::QmlType],child->name(),child))
+                nodeTypeMaps[Node::QmlType]->insert(child->name(),child);
+            break;
+        case Node::QmlBasicType:
+            if (!isDuplicate(nodeTypeMaps[Node::QmlBasicType],child->title(),child))
+                nodeTypeMaps[Node::QmlBasicType]->insert(child->title(),child);
+            break;
+        case Node::Group:
+            if (!isDuplicate(nodeTypeMaps[Node::Group],child->title(),child))
+                nodeTypeMaps[Node::Group]->insert(child->title(),child);
+            break;
+        case Node::Module:
+            if (!isDuplicate(nodeTypeMaps[Node::Module],child->title(),child))
+                nodeTypeMaps[Node::Module]->insert(child->title(),child);
+            break;
+        case Node::QmlModule:
+            if (!isDuplicate(nodeTypeMaps[Node::QmlModule],child->title(),child))
+                nodeTypeMaps[Node::QmlModule]->insert(child->title(),child);
+            break;
         case Node::Document:
             switch (child->subType()) {
             case Node::Example:
@@ -5434,14 +5385,6 @@ Node* DitaXmlGenerator::collectNodesByTypeAndSubtype(const InnerNode* parent)
                 break;
             case Node::Image:
                 break;
-            case Node::Group:
-                if (!isDuplicate(nodeSubtypeMaps[Node::Group],child->title(),child))
-                    nodeSubtypeMaps[Node::Group]->insert(child->title(),child);
-                break;
-            case Node::Module:
-                if (!isDuplicate(nodeSubtypeMaps[Node::Module],child->title(),child))
-                    nodeSubtypeMaps[Node::Module]->insert(child->title(),child);
-                break;
             case Node::Page:
                 if (!isDuplicate(pageTypeMaps[child->pageType()],child->title(),child))
                     pageTypeMaps[child->pageType()]->insert(child->title(),child);
@@ -5450,22 +5393,6 @@ Node* DitaXmlGenerator::collectNodesByTypeAndSubtype(const InnerNode* parent)
                 if (!isDuplicate(nodeSubtypeMaps[Node::ExternalPage],child->title(),child))
                     nodeSubtypeMaps[Node::ExternalPage]->insert(child->title(),child);
                 break;
-            case Node::QmlClass:
-                if (!isDuplicate(nodeSubtypeMaps[Node::QmlClass],child->title(),child))
-                    nodeSubtypeMaps[Node::QmlClass]->insert(child->title(),child);
-                break;
-            case Node::QmlBasicType:
-                if (!isDuplicate(nodeSubtypeMaps[Node::QmlBasicType],child->title(),child))
-                    nodeSubtypeMaps[Node::QmlBasicType]->insert(child->title(),child);
-                break;
-            case Node::QmlModule:
-                if (!isDuplicate(nodeSubtypeMaps[Node::QmlModule],child->title(),child))
-                    nodeSubtypeMaps[Node::QmlModule]->insert(child->title(),child);
-                break;
-            case Node::Collision:
-                if (!isDuplicate(nodeSubtypeMaps[Node::Collision],child->title(),child))
-                    nodeSubtypeMaps[Node::Collision]->insert(child->title(),child);
-                break;
             default:
                 break;
             }
@@ -5509,7 +5436,7 @@ void DitaXmlGenerator::writeDitaMap()
     Remove #if 0 to get a flat ditamap.
 */
 #if 0
-    beginSubPage(qdb_->treeRoot(),"qt.ditamap");
+    beginSubPage(qdb_->primaryTreeRoot(),"qt.ditamap");
     doctype = "<!DOCTYPE map PUBLIC \"-//OASIS//DTD DITA Map//EN\" \"map.dtd\">";
     xmlWriter().writeDTD(doctype);
     writeStartTag(DT_map);
@@ -5535,9 +5462,9 @@ void DitaXmlGenerator::writeDitaMap()
         nodeSubtypeMaps[i] = new NodeMultiMap;
     for (unsigned i=0; i<Node::OnBeyondZebra; ++i)
         pageTypeMaps[i] = new NodeMultiMap;
-    Node* rootPageNode = collectNodesByTypeAndSubtype(qdb_->treeRoot());
+    Node* rootPageNode = collectNodesByTypeAndSubtype(qdb_->primaryTreeRoot());
 
-    beginSubPage(qdb_->treeRoot(),"qt.ditamap");
+    beginSubPage(qdb_->primaryTreeRoot(),"qt.ditamap");
 
     doctype = "<!DOCTYPE map PUBLIC \"-//OASIS//DTD DITA Map//EN\" \"map.dtd\">";
     xmlWriter().writeDTD(doctype);
@@ -5565,22 +5492,26 @@ void DitaXmlGenerator::writeDitaMap()
     writeTopicrefs(pageTypeMaps[Node::FAQPage], "FAQs");
     writeTopicrefs(pageTypeMaps[Node::ArticlePage], "Articles");
     writeTopicrefs(nodeSubtypeMaps[Node::Example], "Examples");
-    if (nodeSubtypeMaps[Node::QmlModule]->size() > 1)
-        writeTopicrefs(nodeSubtypeMaps[Node::QmlModule], "QML modules");
-    if (nodeSubtypeMaps[Node::QmlModule]->size() == 1)
-        writeTopicrefs(nodeSubtypeMaps[Node::QmlClass], "QML types", nodeSubtypeMaps[Node::QmlModule]->values()[0]);
+
+    if (nodeTypeMaps[Node::QmlModule]->size() > 1)
+        writeTopicrefs(nodeTypeMaps[Node::QmlModule], "QML modules");
+
+    if (nodeTypeMaps[Node::QmlModule]->size() == 1)
+        writeTopicrefs(nodeTypeMaps[Node::QmlType], "QML types", nodeTypeMaps[Node::QmlModule]->values()[0]);
     else
-        writeTopicrefs(nodeSubtypeMaps[Node::QmlClass], "QML types");
-    writeTopicrefs(nodeSubtypeMaps[Node::QmlBasicType], "QML basic types");
-    if (nodeSubtypeMaps[Node::Module]->size() > 1)
-        writeTopicrefs(nodeSubtypeMaps[Node::Module], "Modules");
-    if (nodeSubtypeMaps[Node::Module]->size() == 1)
-        writeTopicrefs(nodeTypeMaps[Node::Class], "C++ classes", nodeSubtypeMaps[Node::Module]->values()[0]);
+        writeTopicrefs(nodeTypeMaps[Node::QmlType], "QML types");
+    writeTopicrefs(nodeTypeMaps[Node::QmlBasicType], "QML basic types");
+
+    if (nodeTypeMaps[Node::Module]->size() > 1)
+        writeTopicrefs(nodeTypeMaps[Node::Module], "Modules");
+
+    if (nodeTypeMaps[Node::Module]->size() == 1)
+        writeTopicrefs(nodeTypeMaps[Node::Class], "C++ classes", nodeTypeMaps[Node::Module]->values()[0]);
     else
         writeTopicrefs(nodeTypeMaps[Node::Class], "C++ classes");
     writeTopicrefs(nodeTypeMaps[Node::Namespace], "C++ namespaces");
     writeTopicrefs(nodeSubtypeMaps[Node::HeaderFile], "Header files");
-    writeTopicrefs(nodeSubtypeMaps[Node::Group], "Groups");
+    writeTopicrefs(nodeTypeMaps[Node::Group], "Groups");
 
     writeEndTag(); // </topicref>
     endSubPage();
@@ -5925,30 +5856,32 @@ DitaXmlGenerator::writeProlog(const InnerNode* inner)
     if (!writeMetadataElement(inner,DT_category,false)) {
         writeStartTag(DT_category);
         QString category = "Page";
-        if (inner->type() == Node::Class)
+        if (inner->isClass())
             category = "Class reference";
-        else if (inner->type() == Node::Namespace)
+        if (inner->isQmlType())
+            category = "QML Reference";
+        else if (inner->isQmlBasicType())
+            category = "QML Basic Type";
+        else if (inner->isNamespace())
             category = "Namespace";
-        else if (inner->type() == Node::Document) {
-            if (inner->subType() == Node::QmlClass)
-                category = "QML Reference";
-            else if (inner->subType() == Node::QmlBasicType)
-                category = "QML Basic Type";
-            else if (inner->subType() == Node::HeaderFile)
+        else if (inner->isModule())
+            category = "Module";
+        else if (inner->isQmlModule())
+            category = "QML Module";
+        else if (inner->isGroup())
+            category = "Group";
+        else if (inner->isDocNode()) {
+            if (inner->isHeaderFile())
                 category = "Header File";
-            else if (inner->subType() == Node::Module)
-                category = "Module";
             else if (inner->subType() == Node::File)
                 category = "Example Source File";
-            else if (inner->subType() == Node::Example)
+            else if (inner->isExample())
                 category = "Example";
             else if (inner->subType() == Node::Image)
                 category = "Image";
-            else if (inner->subType() == Node::Group)
-                category = "Group";
             else if (inner->subType() == Node::Page)
                 category = "Page";
-            else if (inner->subType() == Node::ExternalPage)
+            else if (inner->isExternalPage())
                 category = "External Page"; // Is this necessary?
         }
         xmlWriter().writeCharacters(category);
@@ -5990,8 +5923,7 @@ DitaXmlGenerator::writeProlog(const InnerNode* inner)
         xmlWriter().writeAttribute("content",i.value());
         writeEndTag(); // </othermeta>
     }
-    if ((tagStack.first() == DT_cxxClass && !inner->includes().isEmpty()) ||
-        (inner->type() == Node::Document && inner->subType() == Node::HeaderFile)) {
+    if ((tagStack.first() == DT_cxxClass && !inner->includes().isEmpty()) || inner->isHeaderFile()) {
         writeStartTag(DT_othermeta);
         xmlWriter().writeAttribute("name","includeFile");
         QString text;
@@ -6058,123 +5990,4 @@ QString DitaXmlGenerator::stripMarkup(const QString& src) const
     return text;
 }
 
-/*!
-  We delayed generation of the collision pages until now, after
-  all the other pages have been generated. We do this because we might
-  encounter a link command that tries to link to a target on a QML
-  type page, but the link doesn't specify the module identifer
-  for the QML type, and the QML type name without a module
-  identifier is ambiguous. When such a link is found, qdoc can't find
-  the target, so it appends the target to the NameCollisionNode. After
-  the tree has been traversed and all these ambiguous links have been
-  added to the name collision nodes, this function is called. The list
-  of collision nodes is traversed here, and the collision page for
-  each collision is generated. The collision page will not only
-  disambiguate links to the QML type pages, but it will also disambiguate
-  links to properties, section headers, etc.
- */
-void DitaXmlGenerator::generateCollisionPages()
-{
-    if (collisionNodes.isEmpty())
-        return;
-
-    for (int i=0; i<collisionNodes.size(); ++i) {
-        NameCollisionNode* ncn = collisionNodes.at(i);
-        if (!ncn)
-            continue;
-
-        NodeList collisions;
-        const NodeList& nl = ncn->childNodes();
-        if (!nl.isEmpty()) {
-            NodeList::ConstIterator it = nl.constBegin();
-            while (it != nl.constEnd()) {
-                if (!(*it)->isInternal())
-                    collisions.append(*it);
-                ++it;
-            }
-        }
-        if (collisions.size() <= 1)
-            continue;
-
-        ncn->clearCurrentChild();
-        beginSubPage(ncn, Generator::fileName(ncn));
-        QString fullTitle = ncn->fullTitle();
-        QString ditaTitle = fullTitle;
-        CodeMarker* marker = CodeMarker::markerForFileName(ncn->location().filePath());
-        if (ncn->isQmlNode()) {
-            // Replace the marker with a QML code marker.
-            if (ncn->isQmlNode())
-                marker = CodeMarker::markerForLanguage(QLatin1String("QML"));
-        }
-
-        generateHeader(ncn, ditaTitle);
-        writeProlog(ncn);
-        writeStartTag(DT_body);
-        enterSection(QString(), QString());
-
-        NodeMap nm;
-        for (int i=0; i<collisions.size(); ++i) {
-            Node* n = collisions.at(i);
-            QString t;
-            if (!n->qmlModuleName().isEmpty())
-                t = n->qmlModuleName() + QLatin1Char(' ');
-            t += protectEnc(fullTitle);
-            nm.insertMulti(t,n);
-        }
-        generateAnnotatedList(ncn, marker, nm);
-
-        QList<QString> targets;
-        if (!ncn->linkTargets().isEmpty()) {
-            QMap<QString,QString>::ConstIterator t = ncn->linkTargets().constBegin();
-            while (t != ncn->linkTargets().constEnd()) {
-                int count = 0;
-                for (int i=0; i<collisions.size(); ++i) {
-                    InnerNode* n = static_cast<InnerNode*>(collisions.at(i));
-                    if (n->findChildNodeByName(t.key())) {
-                        ++count;
-                        if (count > 1) {
-                            targets.append(t.key());
-                            break;
-                        }
-                    }
-                }
-                ++t;
-            }
-        }
-        if (!targets.isEmpty()) {
-            QList<QString>::ConstIterator t = targets.constBegin();
-            while (t != targets.constEnd()) {
-                writeStartTag(DT_p);
-                writeGuidAttribute(Doc::canonicalTitle(*t));
-                xmlWriter().writeAttribute("outputclass","h2");
-                writeCharacters(protectEnc(*t));
-                writeEndTag(); // </p>
-                writeStartTag(DT_ul);
-                for (int i=0; i<collisions.size(); ++i) {
-                    InnerNode* n = static_cast<InnerNode*>(collisions.at(i));
-                    Node* p = n->findChildNodeByName(*t);
-                    if (p) {
-                        QString link = linkForNode(p,0);
-                        QString label;
-                        if (!n->qmlModuleName().isEmpty())
-                            label = n->qmlModuleName() + "::";
-                        label += n->name() + "::" + p->name();
-                        writeStartTag(DT_li);
-                        writeStartTag(DT_xref);
-                        xmlWriter().writeAttribute("href", link);
-                        writeCharacters(protectEnc(label));
-                        writeEndTag(); // </xref>
-                        writeEndTag(); // </li>
-                    }
-                }
-                writeEndTag(); // </ul>
-                ++t;
-            }
-        }
-        leaveSection(); // </section>
-        writeEndTag(); // </body>
-        endSubPage();
-    }
-}
-
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/ditaxmlgenerator.h b/src/tools/qdoc/ditaxmlgenerator.h
index da05bb0274..4514f19bc8 100644
--- a/src/tools/qdoc/ditaxmlgenerator.h
+++ b/src/tools/qdoc/ditaxmlgenerator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -302,8 +294,7 @@ public:
     virtual void terminateGenerator();
     virtual QString format();
     virtual bool canHandleFormat(const QString& format);
-    virtual void generateTree();
-    void generateCollisionPages();
+    virtual void generateDocs();
 
     QString protectEnc(const QString& string);
     static QString protect(const QString& string, const QString& encoding = "ISO-8859-1");
@@ -315,7 +306,9 @@ protected:
                              const Node* relative,
                              CodeMarker* marker);
     virtual void generateClassLikeNode(InnerNode* inner, CodeMarker* marker);
+    virtual void generateQmlBasicTypePage(QmlBasicTypeNode* qbtn, CodeMarker* marker);
     virtual void generateDocNode(DocNode* dn, CodeMarker* marker);
+    virtual void generateCollectionNode(CollectionNode* cn, CodeMarker* marker);
     virtual QString fileExtension() const;
     virtual QString guidForNode(const Node* node);
     virtual QString linkForNode(const Node* node, const Node* relative);
@@ -349,7 +342,7 @@ protected:
                      CodeMarker* marker,
                      const QString& attribute = QString());
     void writePropertyParameter(const QString& tag, const NodeList& nlist);
-    void writeRelatedLinks(const DocNode* dn);
+    void writeRelatedLinks(const Node* dn);
     void writeLink(const Node* node, const QString& tex, const QString& role);
     void writeProlog(const InnerNode* inner);
     bool writeMetadataElement(const InnerNode* inner,
@@ -364,9 +357,7 @@ private:
     enum SubTitleSize { SmallSubTitle, LargeSubTitle };
 
     const QPair<QString,QString> anchorForNode(const Node* node);
-    void generateHeader(const Node* node,
-                        const QString& name,
-                        bool subpage = false);
+    void generateHeader(const Node* node, const QString& name);
     void generateBrief(const Node* node, CodeMarker* marker);
     void generateTableOfContents(const Node* node,
                                  CodeMarker* marker,
@@ -403,7 +394,7 @@ private:
     void generateDetailedQmlMember(Node* node,
                                    const InnerNode* relative,
                                    CodeMarker* marker);
-    void generateQmlInherits(const QmlClassNode* qcn, CodeMarker* marker);
+    void generateQmlInherits(QmlClassNode* qcn, CodeMarker* marker);
     void generateQmlInheritedBy(const QmlClassNode* qcn, CodeMarker* marker);
     void generateQmlInstantiates(QmlClassNode* qcn, CodeMarker* marker);
     void generateInstantiatedBy(ClassNode* cn, CodeMarker* marker);
@@ -425,12 +416,14 @@ private:
     void generateLink(const Atom* atom, CodeMarker* marker);
     void generateStatus(const Node* node, CodeMarker* marker);
 
+    QString getLink(const Atom *atom, const Node *relative, const Node** node);
+    QString getAutoLink(const Atom *atom, const Node *relative, const Node** node);
+
     QString registerRef(const QString& ref);
     virtual QString fileBase(const Node *node) const;
     QString fileName(const Node *node);
     static int hOffset(const Node *node);
     static bool isThreeColumnEnumValueTable(const Atom *atom);
-    QString getLink(const Atom *atom, const Node *relative, const Node **node);
 #ifdef GENERATE_MAC_REFS
     void generateMacRef(const Node* node, CodeMarker* marker);
 #endif
diff --git a/src/tools/qdoc/doc.cpp b/src/tools/qdoc/doc.cpp
index 6e70671d1d..5a3ad959d2 100644
--- a/src/tools/qdoc/doc.cpp
+++ b/src/tools/qdoc/doc.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,6 +38,7 @@
 #include "openedlist.h"
 #include "quoter.h"
 #include "text.h"
+#include "atom.h"
 #include "tokenizer.h"
 #include <qdatetime.h>
 #include <qfile.h>
@@ -63,7 +56,6 @@ Q_GLOBAL_STATIC(QSet<QString>, null_Set_QString)
 Q_GLOBAL_STATIC(TopicList, nullTopicList)
 Q_GLOBAL_STATIC(QStringList, null_QStringList)
 Q_GLOBAL_STATIC(QList<Text>, null_QList_Text)
-//Q_GLOBAL_STATIC(QStringMap, null_QStringMap)
 Q_GLOBAL_STATIC(QStringMultiMap, null_QStringMultiMap)
 
 struct Macro
@@ -316,17 +308,17 @@ Q_GLOBAL_STATIC(QHash_QString_Macro, macroHash)
 class DocPrivateExtra
 {
 public:
-    Doc::Sections       granularity;
-    Doc::Sections       section; // ###
-    QList<Atom*>        tableOfContents;
-    QList<int>          tableOfContentsLevels;
-    QList<Atom*>        keywords;
-    QList<Atom*>        targets;
-    QStringMultiMap     metaMap;
+    Doc::Sections       granularity_;
+    Doc::Sections       section_; // ###
+    QList<Atom*>        tableOfContents_;
+    QList<int>          tableOfContentsLevels_;
+    QList<Atom*>        keywords_;
+    QList<Atom*>        targets_;
+    QStringMultiMap     metaMap_;
 
     DocPrivateExtra()
-        : granularity(Doc::Part)
-        , section(Doc::NoSection)
+        : granularity_(Doc::Part)
+        , section_(Doc::NoSection)
     { }
 };
 
@@ -475,8 +467,10 @@ private:
     void startSection(Doc::Sections unit, int cmd);
     void endSection(int unit, int endCmd);
     void parseAlso();
+    void append(const QString &string);
     void append(Atom::Type type, const QString& string = QString());
     void append(Atom::Type type, const QString& p1, const QString& p2);
+    void append(const QString& p1, const QString& p2);
     void appendChar(QChar ch);
     void appendWord(const QString &word);
     void appendToCode(const QString &code);
@@ -495,6 +489,7 @@ private:
     Doc::Sections getSectioningUnit();
     QString getArgument(bool verbatim = false);
     QString getBracedArgument(bool verbatim);
+    QString getBracketedArgument();
     QString getOptionalArgument();
     QString getRestOfLine();
     QString getMetaCommandArgument(const QString &cmdStr);
@@ -504,6 +499,7 @@ private:
 
     bool isBlankLine();
     bool isLeftBraceAhead();
+    bool isLeftBracketAhead();
     void skipSpacesOnLine();
     void skipSpacesOrOneEndl();
     void skipAllSpaces();
@@ -535,7 +531,7 @@ private:
     int braceDepth;
     int minIndent;
     Doc::Sections currentSection;
-    QMap<QString, Location> targetMap;
+    QMap<QString, Location> targetMap_;
     QMap<int, QString> pendingFormats;
     QStack<int> openedCommands;
     QStack<OpenedList> openedLists;
@@ -645,7 +641,7 @@ void DocParser::parse(const QString& source,
                     append(Atom::CodeBad,getCode(CMD_BADCODE, marker));
                     break;
                 case CMD_BR:
-                    leavePara();
+                    enterPara();
                     append(Atom::BR);
                     break;
                 case CMD_BOLD:
@@ -876,11 +872,17 @@ void DocParser::parse(const QString& source,
                     append(Atom::SinceList, getRestOfLine().simplified());
                     break;
                 case CMD_GENERATELIST:
-                    append(Atom::GeneratedList, getArgument());
+                    {
+                        QString arg1 = getArgument();
+                        QString arg2 = getOptionalArgument();
+                        if (!arg2.isEmpty())
+                            arg1 += " " + arg2;
+                        append(Atom::GeneratedList, arg1);
+                    }
                     break;
                 case CMD_GRANULARITY:
                     priv->constructExtra();
-                    priv->extra->granularity = getSectioningUnit();
+                    priv->extra->granularity_ = getSectioningUnit();
                     break;
                 case CMD_HEADER:
                     if (openedCommands.top() == CMD_TABLE) {
@@ -959,9 +961,17 @@ void DocParser::parse(const QString& source,
                     break;
                 case CMD_L:
                     enterPara();
+                    if (isLeftBracketAhead()) {
+                        p2 = getBracketedArgument();
+                    }
                     if (isLeftBraceAhead()) {
                         p1 = getArgument();
-                        append(Atom::Link, p1);
+                        append(p1, p2);
+                        if (!p2.isEmpty() && !(priv->text.lastAtom()->error().isEmpty())) {
+                            location().warning(tr("Check parameter in '[ ]' of '\\l' command: '%1', "
+                                                  "possible misspelling, or unrecognized module name")
+                                               .arg(priv->text.lastAtom()->error()));
+                        }
                         if (isLeftBraceAhead()) {
                             currentLinkAtom = priv->text.lastAtom();
                             startFormat(ATOM_FORMATTING_LINK, cmd);
@@ -974,11 +984,17 @@ void DocParser::parse(const QString& source,
                     }
                     else {
                         p1 = getArgument();
-                        append(Atom::Link, p1);
+                        append(p1, p2);
+                        if (!p2.isEmpty() && !(priv->text.lastAtom()->error().isEmpty())) {
+                            location().warning(tr("Check parameter in '[ ]' of '\\l' command: '%1', "
+                                                  "possible misspelling, or unrecognized module name")
+                                               .arg(priv->text.lastAtom()->error()));
+                        }
                         append(Atom::FormattingLeft, ATOM_FORMATTING_LINK);
                         append(Atom::String, cleanLink(p1));
                         append(Atom::FormattingRight, ATOM_FORMATTING_LINK);
                     }
+                    p2.clear();
                     break;
                 case CMD_LEGALESE:
                     leavePara();
@@ -990,7 +1006,7 @@ void DocParser::parse(const QString& source,
                     if (openCommand(cmd)) {
                         enterPara();
                         p1 = getArgument();
-                        append(Atom::Link, p1);
+                        append(p1);
                         append(Atom::FormattingLeft, ATOM_FORMATTING_LINK);
                         skipSpacesOrOneEndl();
                     }
@@ -1025,7 +1041,7 @@ void DocParser::parse(const QString& source,
                 case CMD_META:
                     priv->constructExtra();
                     p1 = getArgument();
-                    priv->extra->metaMap.insert(p1, getArgument());
+                    priv->extra->metaMap_.insert(p1, getArgument());
                     break;
                 case CMD_NEWCODE:
                     location().warning(tr("Unexpected '\\%1'").arg(cmdName(CMD_NEWCODE)));
@@ -1626,8 +1642,8 @@ void DocParser::parse(const QString& source,
         currentSection = Doc::NoSection;
     }
 
-    if (priv->extra && priv->extra->granularity < priv->extra->section)
-        priv->extra->granularity = priv->extra->section;
+    if (priv->extra && priv->extra->granularity_ < priv->extra->section_)
+        priv->extra->granularity_ = priv->extra->section_;
     priv->text.stripFirstAtom();
 }
 
@@ -1668,18 +1684,18 @@ QString DocParser::detailsUnknownCommand(const QSet<QString> &metaCommandSet,
 
 void DocParser::insertTarget(const QString &target, bool keyword)
 {
-    if (targetMap.contains(target)) {
+    if (targetMap_.contains(target)) {
         location().warning(tr("Duplicate target name '%1'").arg(target));
-        targetMap[target].warning(tr("(The previous occurrence is here)"));
+        targetMap_[target].warning(tr("(The previous occurrence is here)"));
     }
     else {
-        targetMap.insert(target, location());
+        targetMap_.insert(target, location());
         append(Atom::Target, target);
         priv->constructExtra();
         if (keyword)
-            priv->extra->keywords.append(priv->text.lastAtom());
+            priv->extra->keywords_.append(priv->text.lastAtom());
         else
-            priv->extra->targets.append(priv->text.lastAtom());
+            priv->extra->targets_.append(priv->text.lastAtom());
     }
 }
 
@@ -1883,15 +1899,15 @@ void DocParser::startSection(Doc::Sections unit, int cmd)
     if (currentSection == Doc::NoSection) {
         currentSection = (Doc::Sections) (unit);
         priv->constructExtra();
-        priv->extra->section = currentSection;
+        priv->extra->section_ = currentSection;
     }
     else
         endSection(unit,cmd);
 
     append(Atom::SectionLeft, QString::number(unit));
     priv->constructExtra();
-    priv->extra->tableOfContents.append(priv->text.lastAtom());
-    priv->extra->tableOfContentsLevels.append(unit);
+    priv->extra->tableOfContents_.append(priv->text.lastAtom());
+    priv->extra->tableOfContentsLevels_.append(unit);
     enterPara(Atom::SectionHeadingLeft,
               Atom::SectionHeadingRight,
               QString::number(unit));
@@ -1970,6 +1986,14 @@ void DocParser::append(Atom::Type type, const QString &string)
     priv->text << Atom(type, string);
 }
 
+void DocParser::append(const QString &string)
+{
+    Atom::Type lastType = priv->text.lastAtom()->type();
+    if ((lastType == Atom::Code) && priv->text.lastAtom()->string().endsWith(QLatin1String("\n\n")))
+        priv->text.lastAtom()->chopString();
+    priv->text << Atom(string);
+}
+
 void DocParser::append(Atom::Type type, const QString& p1, const QString& p2)
 {
     Atom::Type lastType = priv->text.lastAtom()->type();
@@ -1978,6 +2002,17 @@ void DocParser::append(Atom::Type type, const QString& p1, const QString& p2)
     priv->text << Atom(type, p1, p2);
 }
 
+void DocParser::append(const QString& p1, const QString& p2)
+{
+    Atom::Type lastType = priv->text.lastAtom()->type();
+    if ((lastType == Atom::Code) && priv->text.lastAtom()->string().endsWith(QLatin1String("\n\n")))
+        priv->text.lastAtom()->chopString();
+    if (p2.isEmpty())
+        priv->text << Atom(p1);
+    else
+        priv->text << LinkAtom(p1, p2);
+}
+
 void DocParser::appendChar(QChar ch)
 {
     if (priv->text.lastAtom()->type() != Atom::String)
@@ -2239,10 +2274,10 @@ Doc::Sections DocParser::getSectioningUnit()
   Gets an argument that is enclosed in braces and returns it
   without the enclosing braces. On entry, the current character
   is the left brace. On exit, the current character is the one
-  that comes afterr the right brace.
+  that comes after the right brace.
 
   If \a verbatim is true, extra whitespace is retained in the
-  returned string. Otherwise, extr whitespace is removed.
+  returned string. Otherwise, extra whitespace is removed.
  */
 QString DocParser::getBracedArgument(bool verbatim)
 {
@@ -2373,6 +2408,47 @@ QString DocParser::getArgument(bool verbatim)
     return arg.simplified();
 }
 
+/*!
+  Gets an argument that is enclosed in brackets and returns it
+  without the enclosing brackets. On entry, the current character
+  is the left bracket. On exit, the current character is the one
+  that comes after the right bracket.
+ */
+QString DocParser::getBracketedArgument()
+{
+    QString arg;
+    int delimDepth = 0;
+    skipSpacesOrOneEndl();
+    if (pos < in.length() && in[pos] == '[') {
+        pos++;
+        while (pos < in.length() && delimDepth >= 0) {
+            switch (in[pos].unicode()) {
+            case '[':
+                delimDepth++;
+                arg += QLatin1Char('[');
+                pos++;
+                break;
+            case ']':
+                delimDepth--;
+                if (delimDepth >= 0)
+                    arg += QLatin1Char(']');
+                pos++;
+                break;
+            case '\\':
+                arg += in[pos];
+                pos++;
+                break;
+            default:
+                arg += in[pos];
+                pos++;
+            }
+        }
+        if (delimDepth > 0)
+            location().warning(tr("Missing ']'"));
+    }
+    return arg;
+}
+
 QString DocParser::getOptionalArgument()
 {
     skipSpacesOrOneEndl();
@@ -2521,6 +2597,20 @@ bool DocParser::isLeftBraceAhead()
     return numEndl < 2 && i < len && in[i] == '{';
 }
 
+bool DocParser::isLeftBracketAhead()
+{
+    int numEndl = 0;
+    int i = pos;
+
+    while (i < len && in[i].isSpace() && numEndl < 2) {
+        // ### bug with '\\'
+        if (in[i] == '\n')
+            numEndl++;
+        i++;
+    }
+    return numEndl < 2 && i < len && in[i] == '[';
+}
+
 /*!
   Skips to the next non-space character or EOL.
  */
@@ -2958,10 +3048,10 @@ Text Doc::legaleseText() const
 Doc::Sections Doc::granularity() const
 {
     if (priv == 0 || priv->extra == 0) {
-        return DocPrivateExtra().granularity;
+        return DocPrivateExtra().granularity_;
     }
     else {
-        return priv->extra->granularity;
+        return priv->extra->granularity_;
     }
 }
 
@@ -3007,46 +3097,46 @@ const QList<Text> &Doc::alsoList() const
 
 bool Doc::hasTableOfContents() const
 {
-    return priv && priv->extra && !priv->extra->tableOfContents.isEmpty();
+    return priv && priv->extra && !priv->extra->tableOfContents_.isEmpty();
 }
 
 bool Doc::hasKeywords() const
 {
-    return priv && priv->extra && !priv->extra->keywords.isEmpty();
+    return priv && priv->extra && !priv->extra->keywords_.isEmpty();
 }
 
 bool Doc::hasTargets() const
 {
-    return priv && priv->extra && !priv->extra->targets.isEmpty();
+    return priv && priv->extra && !priv->extra->targets_.isEmpty();
 }
 
 const QList<Atom *> &Doc::tableOfContents() const
 {
     priv->constructExtra();
-    return priv->extra->tableOfContents;
+    return priv->extra->tableOfContents_;
 }
 
 const QList<int> &Doc::tableOfContentsLevels() const
 {
     priv->constructExtra();
-    return priv->extra->tableOfContentsLevels;
+    return priv->extra->tableOfContentsLevels_;
 }
 
 const QList<Atom *> &Doc::keywords() const
 {
     priv->constructExtra();
-    return priv->extra->keywords;
+    return priv->extra->keywords_;
 }
 
 const QList<Atom *> &Doc::targets() const
 {
     priv->constructExtra();
-    return priv->extra->targets;
+    return priv->extra->targets_;
 }
 
 const QStringMultiMap &Doc::metaTagMap() const
 {
-    return priv && priv->extra ? priv->extra->metaMap : *null_QStringMultiMap();
+    return priv && priv->extra ? priv->extra->metaMap_ : *null_QStringMultiMap();
 }
 
 const Config* Doc::config_ = 0;
@@ -3054,10 +3144,10 @@ const Config* Doc::config_ = 0;
 void Doc::initialize(const Config& config)
 {
     DocParser::tabSize = config.getInt(CONFIG_TABSIZE);
-    DocParser::exampleFiles = config.getCleanPathList(CONFIG_EXAMPLES);
-    DocParser::exampleDirs = config.getCleanPathList(CONFIG_EXAMPLEDIRS);
-    DocParser::sourceFiles = config.getCleanPathList(CONFIG_SOURCES);
-    DocParser::sourceDirs = config.getCleanPathList(CONFIG_SOURCEDIRS);
+    DocParser::exampleFiles = config.getCanonicalPathList(CONFIG_EXAMPLES);
+    DocParser::exampleDirs = config.getCanonicalPathList(CONFIG_EXAMPLEDIRS);
+    DocParser::sourceFiles = config.getCanonicalPathList(CONFIG_SOURCES);
+    DocParser::sourceDirs = config.getCanonicalPathList(CONFIG_SOURCEDIRS);
     DocParser::quoting = config.getBool(CONFIG_QUOTINGINFORMATION);
 
     QmlClassNode::qmlOnly = config.getBool(CONFIG_QMLONLY);
diff --git a/src/tools/qdoc/doc.h b/src/tools/qdoc/doc.h
index 65007634a6..1c13c0f026 100644
--- a/src/tools/qdoc/doc.h
+++ b/src/tools/qdoc/doc.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/doc/config/qdoc.qdocconf b/src/tools/qdoc/doc/config/qdoc.qdocconf
index 0f4ad07711..9d841e9b64 100644
--- a/src/tools/qdoc/doc/config/qdoc.qdocconf
+++ b/src/tools/qdoc/doc/config/qdoc.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project          = QDoc
 description      = QDoc Manual
-url              = http://qt-project.org/doc/qt-$QT_VER
 version          = $QT_VERSION
 
 sourcedirs = ..
diff --git a/src/tools/qdoc/doc/examples/main.cpp b/src/tools/qdoc/doc/examples/main.cpp
index 62c0576931..4a594feb44 100644
--- a/src/tools/qdoc/doc/examples/main.cpp
+++ b/src/tools/qdoc/doc/examples/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/doc/examples/mainwindow.cpp b/src/tools/qdoc/doc/examples/mainwindow.cpp
index bc7b415d67..9a6cdd8a97 100644
--- a/src/tools/qdoc/doc/examples/mainwindow.cpp
+++ b/src/tools/qdoc/doc/examples/mainwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/doc/files/qtgui.qdocconf b/src/tools/qdoc/doc/files/qtgui.qdocconf
index 7f80808bfc..855ed538c2 100644
--- a/src/tools/qdoc/doc/files/qtgui.qdocconf
+++ b/src/tools/qdoc/doc/files/qtgui.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtGui
 description             = Qt GUI Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = gui
diff --git a/src/tools/qdoc/doc/qdoc-guide/qtwritingstyle-cpp.qdoc b/src/tools/qdoc/doc/qdoc-guide/qtwritingstyle-cpp.qdoc
index 304a736860..291363a22d 100644
--- a/src/tools/qdoc/doc/qdoc-guide/qtwritingstyle-cpp.qdoc
+++ b/src/tools/qdoc/doc/qdoc-guide/qtwritingstyle-cpp.qdoc
@@ -166,7 +166,7 @@ the notifier.
 
 \snippet examples/cpp.qdoc.sample overloaded notifier
 
-\section1 Enums, Namespaces, and other Types
+\section1 Enums, Namespaces, and Other Types
 
 Enums, namespaces, and macros have a \l{writing-topic-commands}{topic command} for their documentation:
 \list
diff --git a/src/tools/qdoc/doc/qdoc-manual-DITA.qdoc b/src/tools/qdoc/doc/qdoc-manual-DITA.qdoc
index 070bad336f..4e4bea7556 100644
--- a/src/tools/qdoc/doc/qdoc-manual-DITA.qdoc
+++ b/src/tools/qdoc/doc/qdoc-manual-DITA.qdoc
@@ -39,7 +39,7 @@
     documentation build process is still under consideration. This section will be updated
     as the decisions are made.
 
-    \section1 What is a DITA map?
+    \section1 What is a DITA Map?
 
     A complete description of DITA can be found at the
     \l{http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=dita}
@@ -107,7 +107,7 @@
         \mapref {Creator Manual} {creator-manual.ditamap} \endmapref
     \endcode
 
-    \section1 An example ditamap page
+    \section1 An Example Ditamap Page
 
     The following example uses the three qdoc ditamap commands described above.
 
@@ -131,7 +131,7 @@
       \endtopicref
     \endcode
 
-    \section1 The resulting ditamap file
+    \section1 The Resulting Ditamap File
 
     This is the \e{.ditamap} file you get when you input the qdoc
     ditamap page shown above. Note that you can write ditamap files
diff --git a/src/tools/qdoc/doc/qdoc-manual-intro.qdoc b/src/tools/qdoc/doc/qdoc-manual-intro.qdoc
index f681c0a574..636cd6980e 100644
--- a/src/tools/qdoc/doc/qdoc-manual-intro.qdoc
+++ b/src/tools/qdoc/doc/qdoc-manual-intro.qdoc
@@ -107,7 +107,7 @@
     See \l{The QDoc Configuration File} for instructions on how to
     set up a QDoc configuration file.
 
-    \section1 How QDoc works
+    \section1 How QDoc Works
 
     QDoc begins by reading the configuration file you specified on the
     command line. It stores all the variables from the configuration
diff --git a/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc b/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc
index fe43938968..c04cdeca2b 100644
--- a/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc
+++ b/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc
@@ -2543,6 +2543,13 @@
     file or namespace documentation. See the \l {enum-command}
     {\\enum} documentation for an example.
 
+    \note Since Qt 5.4, \\value command can also be used outside the
+    \l {enum-command} {\\enum} topic. In this case, QDoc renders a
+    two-column table listing the constant name (taken as-is from the
+    first argument) and its description. This can be used, for
+    example, in \l {qmlproperty-command}{\\qmlproperty} topic for
+    documenting acceptable values for a QML enumeration property.
+
     See also \l {enum-command} {\\enum} and \l {omitvalue-command} {\\omitvalue}.
 
     \target omitvalue-command
@@ -3251,9 +3258,9 @@
     \target generatelist-command
     \section1 \\generatelist
 
-    The \\generatelist command expands to a list of various
-    documentation or links to documentation. Below is an example from
-    the Qt Reference Documentation:
+    The \\generatelist command expands to a list of links to the
+    documentation entities in a group. Below is an example from the Qt
+    Reference Documentation:
 
            \code
            / *!
@@ -3263,7 +3270,7 @@
                For a shorter list that only includes the most
                frequently used classes, see \l{Qt's Main Classes}.
 
-               \generatelist classes
+               \generatelist classes Q
            * /
            \endcode
 
@@ -3295,10 +3302,17 @@
     of the class comment's \l {brief-command} {\\brief} command.
 
     \target list example
-    \section2 \c classes
+    \section2 \c {classes <prefix>}
 
     The \c classes argument provides a complete alphabetical list of
-    the classes. Each class name is a link to the class's reference
+    the classes. The second argument, \c{<prefix>}, is the common
+    prefix for the class names. The class names will be sorted on the
+    character that follows the common prefix. e.g. The common prefix
+    for the Qt classes is \c Q. The common prefix argument is
+    optional.  If no common prefix is provided, the class names will
+    be sorted on their first character.
+
+    Each class name becomes a link to the class's reference
     documentation. This command is used to generate the
     \e {All Classes} page this way:
 
@@ -3315,7 +3329,7 @@
         Classes}. For classes that have been deprecated, see the
         \l{Obsolete Classes} list.
 
-        \generatelist classes
+        \generatelist classes Q
     * /
     \endcode
 
diff --git a/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc b/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc
index 913f8fcc00..093f9cc2c6 100644
--- a/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc
+++ b/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc
@@ -1,6 +1,6 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the documentation of the Qt Toolkit.
@@ -1126,7 +1126,7 @@
     erroneous documentation due to non-standard C++ constructs.
 
     \target Cpp.ignoredirectives-variable
-    \section1  Cpp.ignoredirectives
+    \section1 Cpp.ignoredirectives
     The \c Cpp.ignoredirectives variable makes QDoc ignore the
     specified non-standard constructs, within C++ source code.
 
@@ -1177,7 +1177,7 @@
     See also \l Cpp.ignoretokens.
 
     \target Cpp.ignoretokens-variable
-    \section1  Cpp.ignoretokens
+    \section1 Cpp.ignoretokens
 
     The \c Cpp.ignoretokens variable makes QDoc ignore the specified
     non-standard constructs, within C++ source code.
@@ -1331,6 +1331,13 @@
     \l qtgui.qdocconf file, and it will copy those specified to the output
     directory alongside the HTML pages.
 
+    \target HTML.tocdepth
+    \section1 HTML.tocdepth
+
+    The HTML.tocdepth variable defines how many document sections are printed in
+    the table of contents. Setting tocdepth to \c 0 disables the table of
+    contents while not setting the variable prints all document sections.
+
 */
 
 /*!
diff --git a/src/tools/qdoc/doc/qdoc-manual-topiccmds.qdoc b/src/tools/qdoc/doc/qdoc-manual-topiccmds.qdoc
index b9667b7758..b50a343a22 100644
--- a/src/tools/qdoc/doc/qdoc-manual-topiccmds.qdoc
+++ b/src/tools/qdoc/doc/qdoc-manual-topiccmds.qdoc
@@ -1315,6 +1315,10 @@
     \l {http://qt-project.org/doc/qt-4.7/qml-translate.html} {Translate}
     element.
 
+    If the QML property is of enumeration type, or it holds a bit-wise
+    combination of flags, the \l{value-command}{\\value} command can
+    be used to document the acceptable values.
+
     \target qmlsignal-command
     \section1 \\qmlsignal
 
diff --git a/src/tools/qdoc/editdistance.cpp b/src/tools/qdoc/editdistance.cpp
index a32afde833..aec9d13972 100644
--- a/src/tools/qdoc/editdistance.cpp
+++ b/src/tools/qdoc/editdistance.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/editdistance.h b/src/tools/qdoc/editdistance.h
index 39ed1ff3ba..b6467e0400 100644
--- a/src/tools/qdoc/editdistance.h
+++ b/src/tools/qdoc/editdistance.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/generator.cpp b/src/tools/qdoc/generator.cpp
index 9b82e80927..5aff19e121 100644
--- a/src/tools/qdoc/generator.cpp
+++ b/src/tools/qdoc/generator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,6 +61,7 @@ QStringList Generator::imageFiles;
 QMap<QString, QStringList> Generator::imgFileExts;
 QString Generator::outDir_;
 QString Generator::outSubdir_;
+QStringList Generator::outFileNames_;
 QSet<QString> Generator::outputFormats;
 QHash<QString, QString> Generator::outputPrefixes;
 QString Generator::project;
@@ -97,26 +90,30 @@ QStringList Generator::styleDirs;
 QStringList Generator::styleFiles;
 bool Generator::debugging_ = false;
 bool Generator::noLinkErrors_ = false;
+bool Generator::autolinkErrors_ = false;
 bool Generator::redirectDocumentationToDevNull_ = false;
 Generator::Passes Generator::qdocPass_ = Both;
 bool Generator::useOutputSubdirs_ = true;
 
-void Generator::setDebugSegfaultFlag(bool b)
+void Generator::startDebugging(const QString& message)
 {
-    if (b)
-        qDebug() << "DEBUG: Setting debug flag.";
-    else
-        qDebug() << "DEBUG: Clearing debug flag.";
-    debugging_ = b;
+    debugging_ = true;
+    qDebug() << "START DEBUGGING:" << message;
+}
+
+void Generator::stopDebugging(const QString& message)
+{
+    debugging_ = false;
+    qDebug() << "STOP DEBUGGING:" << message;
 }
 
 /*!
   Prints \a message as an aid to debugging the release version.
  */
-void Generator::debugSegfault(const QString& message)
+void Generator::debug(const QString& message)
 {
     if (debugging())
-        qDebug() << "DEBUG:" << message;
+        qDebug() << "  DEBUG:" << message;
 }
 
 /*!
@@ -189,19 +186,20 @@ void Generator::appendFullNames(Text& text, const NodeList& nodes, const Node* r
     }
 }
 
-void Generator::appendSortedNames(Text& text, const ClassNode *classe, const QList<RelatedClass> &classes)
+void Generator::appendSortedNames(Text& text, const ClassNode* cn, const QList<RelatedClass>& rc)
 {
     QList<RelatedClass>::ConstIterator r;
     QMap<QString,Text> classMap;
     int index = 0;
 
-    r = classes.constBegin();
-    while (r != classes.constEnd()) {
-        if ((*r).node->access() == Node::Public &&
-                (*r).node->status() != Node::Internal
-                && !(*r).node->doc().isEmpty()) {
+    r = rc.constBegin();
+    while (r != rc.constEnd()) {
+        ClassNode* rcn = (*r).node_;
+        if (rcn && rcn->access() == Node::Public &&
+              rcn->status() != Node::Internal &&
+              !rcn->doc().isEmpty()) {
             Text className;
-            appendFullName(className, (*r).node, classe);
+            appendFullName(className, rcn, cn);
             classMap[className.toString().toLower()] = className;
         }
         ++r;
@@ -239,8 +237,6 @@ void Generator::appendSortedQmlNames(Text& text, const Node* base, const NodeLis
     }
 }
 
-QMultiMap<QString,QString> outFileNames;
-
 /*!
   For debugging qdoc.
  */
@@ -250,10 +246,8 @@ void Generator::writeOutFileNames()
     if (!files.open(QFile::WriteOnly))
         return;
     QTextStream filesout(&files);
-    QMultiMap<QString,QString>::ConstIterator i = outFileNames.begin();
-    while (i != outFileNames.end()) {
-        filesout << i.key() << "\n";
-        ++i;
+    foreach (const QString &file, outFileNames_) {
+        filesout << file << "\n";
     }
 }
 
@@ -274,8 +268,8 @@ void Generator::beginSubPage(const InnerNode* node, const QString& fileName)
         node->location().error(tr("HTML file already exists; overwriting %1").arg(outFile->fileName()));
     if (!outFile->open(QFile::WriteOnly))
         node->location().fatal(tr("Cannot open output file '%1'").arg(outFile->fileName()));
-    Generator::debugSegfault("Writing: " + path);
-    outFileNames.insert(fileName,fileName);
+    Generator::debug("Writing: " + path);
+    outFileNames_ << fileName;
     QTextStream* out = new QTextStream(outFile);
 
 #ifndef QT_NO_TEXTCODEC
@@ -308,47 +302,15 @@ QString Generator::fileBase(const Node *node) const
         node = node->parent();
     }
 
-    if (node->type() == Node::Document && node->subType() == Node::Collision) {
-        const NameCollisionNode* ncn = static_cast<const NameCollisionNode*>(node);
-        if (ncn->currentChild())
-            return fileBase(ncn->currentChild());
-    }
-
-    if (node->hasBaseName())
-        return node->baseName();
+    if (node->hasFileNameBase())
+        return node->fileNameBase();
 
     QString base;
-    if (node->type() == Node::Document) {
+    if (node->isDocNode()) {
         base = node->name();
-        if (node->subType() == Node::Collision) {
-            const NameCollisionNode* ncn = static_cast<const NameCollisionNode*>(node);
-            if (ncn->currentChild())
-                return fileBase(ncn->currentChild());
-            base.prepend("collision-");
-        }
-        //Was QDOC2_COMPAT, required for index.html
-        if (base.endsWith(".html"))
+        if (base.endsWith(".html") && !node->isExampleFile())
             base.truncate(base.length() - 5);
 
-        if (node->isQmlNode()) {
-            if (!node->qmlModuleName().isEmpty()) {
-                base.prepend(node->qmlModuleName() + QLatin1Char('-'));
-            }
-            /*
-              To avoid file name conflicts in the html directory,
-              we prepend a prefix (by default, "qml-") to the file name of QML
-              element doc files.
-            */
-            if ((node->subType() == Node::QmlClass) || (node->subType() == Node::QmlBasicType)) {
-                base.prepend(outputPrefix(QLatin1String("QML")));
-            }
-        }
-        else if (node->subType() == Node::QmlModule) {
-            base.append("-qmlmodule");
-        }
-        else if (node->subType() == Node::Module) {
-            base.append("-module");
-        }
         if (node->isExample() || node->isExampleFile()) {
             QString modPrefix(node->moduleName());
             if (modPrefix.isEmpty()) {
@@ -360,12 +322,37 @@ QString Generator::fileBase(const Node *node) const
             base.append(QLatin1String("-example"));
         }
     }
+    else if (node->isQmlType() || node->isQmlBasicType()) {
+        base = node->name();
+        if (!node->qmlModuleName().isEmpty()) {
+            base.prepend(node->qmlModuleName() + QLatin1Char('-'));
+        }
+        /*
+          To avoid file name conflicts in the html directory,
+          we prepend a prefix (by default, "qml-") to the file name of QML
+          element doc files.
+        */
+        base.prepend(outputPrefix(QLatin1String("QML")));
+    }
+    else if (node->isCollectionNode()) {
+        base = node->name();
+        if (base.endsWith(".html"))
+            base.truncate(base.length() - 5);
+
+        if (node->isQmlModule()) {
+            base.append("-qmlmodule");
+        }
+        else if (node->isModule()) {
+            base.append("-module");
+        }
+        // Why not add "-group" for gropup pages?
+    }
     else {
         const Node *p = node;
         forever {
             const Node *pp = p->parent();
             base.prepend(p->name());
-            if (!pp || pp->name().isEmpty() || pp->type() == Node::Document)
+            if (!pp || pp->name().isEmpty() || pp->isDocNode())
                 break;
             base.prepend(QLatin1Char('-'));
             p = pp;
@@ -401,7 +388,7 @@ QString Generator::fileBase(const Node *node) const
     while (res.endsWith(QLatin1Char('-')))
         res.chop(1);
     Node* n = const_cast<Node*>(node);
-    n->setBaseName(res);
+    n->setFileNameBase(res);
     return res;
 }
 
@@ -455,7 +442,7 @@ QString Generator::fullDocumentLocation(const Node *node, bool useSubdir)
         if (!fdl.isEmpty())
             fdl.append(QLatin1Char('/'));
     }
-    if (node->type() == Node::Namespace) {
+    if (node->isNamespace()) {
 
         // The root namespace has no name - check for this before creating
         // an attribute containing the location of any documentation.
@@ -465,26 +452,23 @@ QString Generator::fullDocumentLocation(const Node *node, bool useSubdir)
         else
             return QString();
     }
-    else if (node->type() == Node::Document) {
-        if ((node->subType() == Node::QmlClass) ||
-                (node->subType() == Node::QmlBasicType)) {
-            QString fb = fileBase(node);
-            if (fb.startsWith(Generator::outputPrefix(QLatin1String("QML"))))
-                return fb + QLatin1Char('.') + currentGenerator()->fileExtension();
-            else {
-                QString mq;
-                if (!node->qmlModuleName().isEmpty()) {
-                    mq = node->qmlModuleName().replace(QChar('.'),QChar('-'));
-                    mq = mq.toLower() + QLatin1Char('-');
-                }
-                return fdl+ Generator::outputPrefix(QLatin1String("QML")) + mq +
-                        fileBase(node) + QLatin1Char('.') + currentGenerator()->fileExtension();
-            }
-        }
+    else if (node->isQmlType() || node->isQmlBasicType()) {
+        QString fb = fileBase(node);
+        if (fb.startsWith(Generator::outputPrefix(QLatin1String("QML"))))
+            return fb + QLatin1Char('.') + currentGenerator()->fileExtension();
         else {
-            parentName = fileBase(node) + QLatin1Char('.') + currentGenerator()->fileExtension();
+            QString mq;
+            if (!node->qmlModuleName().isEmpty()) {
+                mq = node->qmlModuleName().replace(QChar('.'),QChar('-'));
+                mq = mq.toLower() + QLatin1Char('-');
+            }
+            return fdl+ Generator::outputPrefix(QLatin1String("QML")) + mq +
+                fileBase(node) + QLatin1Char('.') + currentGenerator()->fileExtension();
         }
     }
+    else if (node->isDocNode() || node->isCollectionNode()) {
+        parentName = fileBase(node) + QLatin1Char('.') + currentGenerator()->fileExtension();
+    }
     else if (fileBase(node).isEmpty())
         return QString();
 
@@ -547,7 +531,10 @@ QString Generator::fullDocumentLocation(const Node *node, bool useSubdir)
         anchorRef = QLatin1Char('#') + node->name() + "-prop";
         break;
     case Node::QmlProperty:
-        anchorRef = QLatin1Char('#') + node->name() + "-prop";
+        if (node->isAttached())
+            anchorRef = QLatin1Char('#') + node->name() + "-attached-prop";
+        else
+            anchorRef = QLatin1Char('#') + node->name() + "-prop";
         break;
     case Node::QmlSignal:
         anchorRef = QLatin1Char('#') + node->name() + "-signal";
@@ -561,7 +548,11 @@ QString Generator::fullDocumentLocation(const Node *node, bool useSubdir)
     case Node::Variable:
         anchorRef = QLatin1Char('#') + node->name() + "-var";
         break;
+    case Node::QmlType:
     case Node::Document:
+    case Node::Group:
+    case Node::Module:
+    case Node::QmlModule:
     {
         parentName = fileBase(node);
         parentName.replace(QLatin1Char('/'), QLatin1Char('-')).replace(QLatin1Char('.'), QLatin1Char('-'));
@@ -573,7 +564,8 @@ QString Generator::fullDocumentLocation(const Node *node, bool useSubdir)
     }
 
     // Various objects can be compat (deprecated) or obsolete.
-    if (node->type() != Node::Class && node->type() != Node::Namespace) {
+    // Is this even correct?
+    if (!node->isClass() && !node->isNamespace()) {
         switch (node->status()) {
         case Node::Compat:
             parentName.replace(QLatin1Char('.') + currentGenerator()->fileExtension(),
@@ -678,6 +670,10 @@ const Atom *Generator::generateAtomList(const Atom *atom,
     return 0;
 }
 
+/*!
+  Generate the body of the documentation from the qdoc comment
+  found with the entity represented by the \a node.
+ */
 void Generator::generateBody(const Node *node, CodeMarker *marker)
 {
     bool quiet = false;
@@ -808,9 +804,9 @@ void Generator::generateBody(const Node *node, CodeMarker *marker)
         }
     }
 
-    if (node->type() == Node::Document) {
+    if (node->isDocNode()) {
         const DocNode *dn = static_cast<const DocNode *>(node);
-        if (dn->subType() == Node::Example) {
+        if (dn->isExample()) {
             generateExampleFiles(dn, marker);
         }
         else if (dn->subType() == Node::File) {
@@ -841,6 +837,10 @@ void Generator::generateDocNode(DocNode* /* dn */, CodeMarker* /* marker */)
 {
 }
 
+void Generator::generateCollectionNode(CollectionNode* , CodeMarker* )
+{
+}
+
 /*!
   This function is called when the documentation for an
   example is being formatted. It outputs the list of source
@@ -936,18 +936,20 @@ void Generator::generateInherits(const ClassNode *classe, CodeMarker *marker)
         r = classe->baseClasses().constBegin();
         index = 0;
         while (r != classe->baseClasses().constEnd()) {
-            text << Atom(Atom::LinkNode, CodeMarker::stringForNode((*r).node))
-                 << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
-                 << Atom(Atom::String, (*r).dataTypeWithTemplateArgs)
-                 << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK);
-
-            if ((*r).access == Node::Protected) {
-                text << " (protected)";
-            }
-            else if ((*r).access == Node::Private) {
-                text << " (private)";
+            if ((*r).node_) {
+                text << Atom(Atom::LinkNode, CodeMarker::stringForNode((*r).node_))
+                     << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
+                     << Atom(Atom::String, (*r).signature_)
+                     << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK);
+
+                if ((*r).access_ == Node::Protected) {
+                    text << " (protected)";
+                }
+                else if ((*r).access_ == Node::Private) {
+                    text << " (private)";
+                }
+                text << separator(index++, classe->baseClasses().count());
             }
-            text << separator(index++, classe->baseClasses().count());
             ++r;
         }
         text << Atom::ParaRight;
@@ -958,9 +960,8 @@ void Generator::generateInherits(const ClassNode *classe, CodeMarker *marker)
 /*!
   Recursive writing of HTML files from the root \a node.
 
-  \note NameCollisionNodes are skipped here and processed
-  later. See HtmlGenerator::generateCollisionPages() for
-  more on this.
+  \note DitaXmlGenerator overrides this function, but
+  HtmlGenerator does not.
  */
 void Generator::generateInnerNode(InnerNode* node)
 {
@@ -971,7 +972,7 @@ void Generator::generateInnerNode(InnerNode* node)
     if (node->isInternal() && !showInternal_)
         return;
 
-    if (node->type() == Node::Document) {
+    if (node->isDocNode()) {
         DocNode* docNode = static_cast<DocNode*>(node);
         if (docNode->subType() == Node::ExternalPage)
             return;
@@ -982,7 +983,7 @@ void Generator::generateInnerNode(InnerNode* node)
                 qDebug("PAGE %s HAS CHILDREN", qPrintable(docNode->title()));
         }
     }
-    else if (node->type() == Node::QmlPropertyGroup)
+    else if (node->isQmlPropertyGroup())
         return;
 
     /*
@@ -991,25 +992,56 @@ void Generator::generateInnerNode(InnerNode* node)
     CodeMarker *marker = CodeMarker::markerForFileName(node->location().filePath());
 
     if (node->parent() != 0) {
-        /*
-          Skip name collision nodes here and process them
-          later in generateCollisionPages(). Each one is
-          appended to a list for later.
-         */
-        if ((node->type() == Node::Document) && (node->subType() == Node::Collision)) {
-            NameCollisionNode* ncn = static_cast<NameCollisionNode*>(node);
-            collisionNodes.append(const_cast<NameCollisionNode*>(ncn));
+        if (node->isNamespace() || node->isClass()) {
+            beginSubPage(node, fileName(node));
+            generateClassLikeNode(node, marker);
+            endSubPage();
         }
-        else {
+        if (node->isQmlType()) {
             beginSubPage(node, fileName(node));
-            if (node->type() == Node::Namespace || node->type() == Node::Class) {
-                generateClassLikeNode(node, marker);
-            }
-            else if (node->type() == Node::Document) {
-                generateDocNode(static_cast<DocNode*>(node), marker);
-            }
+            QmlClassNode* qcn = static_cast<QmlClassNode*>(node);
+            generateQmlTypePage(qcn, marker);
+            endSubPage();
+        }
+        else if (node->isDocNode()) {
+            beginSubPage(node, fileName(node));
+            generateDocNode(static_cast<DocNode*>(node), marker);
+            endSubPage();
+        }
+        else if (node->isQmlBasicType()) {
+            beginSubPage(node, fileName(node));
+            QmlBasicTypeNode* qbtn = static_cast<QmlBasicTypeNode*>(node);
+            generateQmlBasicTypePage(qbtn, marker);
             endSubPage();
         }
+        else if (node->isCollectionNode()) {
+            CollectionNode* cn = static_cast<CollectionNode*>(node);
+            /*
+              A collection node is one of: group, module,
+              or QML module.
+
+              Don't output an HTML page for the collection
+              node unless the \group, \module, or \qmlmodule
+              command was actually seen by qdoc in the qdoc
+              comment for the node.
+
+              A key prerequisite in this case is the call to
+              mergeCollections(cn). We don't know if this
+              collection (group, module, or QML module) has
+              members in other modules. We know at this point
+              that cn's members list contains only members in
+              the current module. Therefore, before outputting
+              the page for cn, we must search for members of
+              cn in the other modules and add them to the
+              members list.
+            */
+            if (cn->wasSeen()) {
+                qdb_->mergeCollections(cn);
+                beginSubPage(node, fileName(node));
+                generateCollectionNode(cn, marker);
+                endSubPage();
+            }
+        }
     }
 
     int i = 0;
@@ -1066,7 +1098,7 @@ void Generator::generateQmlInheritedBy(const QmlClassNode* qcn,
 
 /*!
  */
-void Generator::generateQmlInherits(const QmlClassNode* , CodeMarker* )
+void Generator::generateQmlInherits(QmlClassNode* , CodeMarker* )
 {
     // stub.
 }
@@ -1203,6 +1235,11 @@ void Generator::generateStatus(const Node *node, CodeMarker *marker)
     generateText(text, node, marker);
 }
 
+/*!
+  Generate the documentation for \a relative. i.e. \a relative
+  is the node that reporesentas the entity where a qdoc comment
+  was found, and \a text represents the qdoc comment.
+ */
 bool Generator::generateText(const Text& text,
                              const Node *relative,
                              CodeMarker *marker)
@@ -1362,11 +1399,11 @@ void Generator::generateThreadSafeness(const Node *node, CodeMarker *marker)
 }
 
 /*!
-  Traverses the database recursivly to generate all the documentation.
+  Traverses the current tree to generate all the documentation.
  */
-void Generator::generateTree()
+void Generator::generateDocs()
 {
-    generateInnerNode(qdb_->treeRoot());
+    generateInnerNode(qdb_->primaryTreeRoot());
 }
 
 Generator *Generator::generatorForFormat(const QString& format)
@@ -1381,40 +1418,6 @@ Generator *Generator::generatorForFormat(const QString& format)
 }
 
 /*!
-  This function can be called if getLink() returns an empty
-  string. It tests the \a atom string to see if it is a link
-  of the form <element> :: <name>, where <element> is a QML
-  element or component without a module qualifier. If so, it
-  constructs a link to the <name> clause on the disambiguation
-  page for <element> and returns that link string. It also
-  adds the <name> as a target in the NameCollisionNode for
-  <element>. These clauses are then constructed when the
-  disambiguation page is actually generated.
- */
-QString Generator::getCollisionLink(const Atom* atom)
-{
-    QString link;
-    if (!atom->string().contains("::"))
-        return link;
-    QStringList path = atom->string().split("::");
-    NameCollisionNode* ncn = qdb_->findCollisionNode(path[0]);
-    if (ncn) {
-        QString label;
-        if (atom->next() && atom->next()->next()) {
-            if (atom->next()->type() == Atom::FormattingLeft &&
-                    atom->next()->next()->type() == Atom::String)
-                label = atom->next()->next()->string();
-        }
-        ncn->addLinkTarget(path[1],label);
-        link = fileName(ncn);
-        link += QLatin1Char('#');
-        link += Doc::canonicalTitle(path[1]);
-    }
-    return link;
-}
-
-
-/*!
   Looks up the tag \a t in the map of metadata values for the
   current topic in \a inner. If a value for the tag is found,
   the value is returned.
@@ -1546,13 +1549,13 @@ void Generator::initialize(const Config &config)
             config.lastLocation().fatal(tr("Cannot create style directory '%1'").arg(outDir_ + "/style"));
     }
 
-    imageFiles = config.getCleanPathList(CONFIG_IMAGES);
-    imageDirs = config.getCleanPathList(CONFIG_IMAGEDIRS);
-    scriptFiles = config.getCleanPathList(CONFIG_SCRIPTS);
-    scriptDirs = config.getCleanPathList(CONFIG_SCRIPTDIRS);
-    styleFiles = config.getCleanPathList(CONFIG_STYLES);
-    styleDirs = config.getCleanPathList(CONFIG_STYLEDIRS);
-    exampleDirs = config.getCleanPathList(CONFIG_EXAMPLEDIRS);
+    imageFiles = config.getCanonicalPathList(CONFIG_IMAGES);
+    imageDirs = config.getCanonicalPathList(CONFIG_IMAGEDIRS);
+    scriptFiles = config.getCanonicalPathList(CONFIG_SCRIPTS);
+    scriptDirs = config.getCanonicalPathList(CONFIG_SCRIPTDIRS);
+    styleFiles = config.getCanonicalPathList(CONFIG_STYLES);
+    styleDirs = config.getCanonicalPathList(CONFIG_STYLEDIRS);
+    exampleDirs = config.getCanonicalPathList(CONFIG_EXAMPLEDIRS);
     exampleImgExts = config.getStringList(CONFIG_EXAMPLES + Config::dot + CONFIG_IMAGEEXTENSIONS);
 
     QString imagesDotFileExtensions = CONFIG_IMAGES + Config::dot + CONFIG_FILEEXTENSIONS;
@@ -1568,9 +1571,9 @@ void Generator::initialize(const Config &config)
         if (outputFormats.contains((*g)->format())) {
             currentGenerator_ = (*g);
             (*g)->initializeGenerator(config);
-            QStringList extraImages = config.getPathList((*g)->format() +
+            QStringList extraImages = config.getCanonicalPathList((*g)->format() +
                                                          Config::dot +
-                                                         CONFIG_EXTRAIMAGES);
+                                                         CONFIG_EXTRAIMAGES, true);
             QStringList::ConstIterator e = extraImages.constBegin();
             while (e != extraImages.constEnd()) {
                 QString filePath = *e;
@@ -1581,7 +1584,7 @@ void Generator::initialize(const Config &config)
             }
 
             // Documentation template handling
-            QStringList scripts = config.getPathList((*g)->format()+Config::dot+CONFIG_SCRIPTS);
+            QStringList scripts = config.getCanonicalPathList((*g)->format()+Config::dot+CONFIG_SCRIPTS, true);
             e = scripts.constBegin();
             while (e != scripts.constEnd()) {
                 QString filePath = *e;
@@ -1591,7 +1594,7 @@ void Generator::initialize(const Config &config)
                 ++e;
             }
 
-            QStringList styles = config.getPathList((*g)->format()+Config::dot+CONFIG_STYLESHEETS);
+            QStringList styles = config.getCanonicalPathList((*g)->format()+Config::dot+CONFIG_STYLESHEETS, true);
             e = styles.constBegin();
             while (e != styles.constEnd()) {
                 QString filePath = *e;
@@ -1650,6 +1653,7 @@ void Generator::initialize(const Config &config)
     else
         outputPrefixes[QLatin1String("QML")] = QLatin1String("qml-");
     noLinkErrors_ = config.getBool(CONFIG_NOLINKERRORS);
+    autolinkErrors_ = config.getBool(CONFIG_AUTOLINKERRORS);
 }
 
 /*!
@@ -1916,7 +1920,6 @@ void Generator::terminate()
     imageDirs.clear();
     outDir_.clear();
     QmlClassNode::terminate();
-    ExampleNode::terminate();
 }
 
 void Generator::terminateGenerator()
@@ -1942,17 +1945,12 @@ QString Generator::typeString(const Node *node)
         return "namespace";
     case Node::Class:
         return "class";
+    case Node::QmlType:
+        return "type";
+    case Node::QmlBasicType:
+        return "type";
     case Node::Document:
-    {
-        switch (node->subType()) {
-        case Node::QmlClass:
-            return "type";
-        case Node::QmlBasicType:
-            return "type";
-        default:
-            return "documentation";
-        }
-    }
+        return "documentation";
     case Node::Enum:
         return "enum";
     case Node::Typedef:
diff --git a/src/tools/qdoc/generator.h b/src/tools/qdoc/generator.h
index b464014308..110a8d9e73 100644
--- a/src/tools/qdoc/generator.h
+++ b/src/tools/qdoc/generator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,7 +69,7 @@ public:
 
     virtual bool canHandleFormat(const QString &format) { return format == this->format(); }
     virtual QString format() = 0;
-    virtual void generateTree();
+    virtual void generateDocs();
     virtual void initializeGenerator(const Config &config);
     virtual void terminateGenerator();
 
@@ -90,12 +82,15 @@ public:
     static const QString& outputDir() { return outDir_; }
     static const QString& outputSubdir() { return outSubdir_; }
     static void terminate();
+    static const QStringList& outputFileNames() { return outFileNames_; }
     static void writeOutFileNames();
     static void augmentImageDirs(QSet<QString>& moreImageDirs);
-    static void debugSegfault(const QString& message);
-    static void setDebugSegfaultFlag(bool b);
+    static void debug(const QString& message);
+    static void startDebugging(const QString& message);
+    static void stopDebugging(const QString& message);
     static bool debugging() { return debugging_; }
     static bool noLinkErrors() { return noLinkErrors_; }
+    static bool autolinkErrors() { return autolinkErrors_; }
     static void setQDocPass(Passes pass) { qdocPass_ = pass; }
     static bool runPrepareOnly() { return (qdocPass_ == Prepare); }
     static bool runGenerateOnly() { return (qdocPass_ == Generate); }
@@ -109,27 +104,24 @@ protected:
     virtual QString fileBase(const Node* node) const;
     virtual QString fileExtension() const = 0;
     virtual void generateAlsoList(const Node *node, CodeMarker *marker);
-    virtual int generateAtom(const Atom *atom,
-                             const Node *relative,
-                             CodeMarker *marker);
+    virtual int generateAtom(const Atom *atom, const Node *relative, CodeMarker *marker);
     virtual void generateBody(const Node *node, CodeMarker *marker);
     virtual void generateClassLikeNode(InnerNode* inner, CodeMarker* marker);
+    virtual void generateQmlTypePage(QmlClassNode* , CodeMarker* ) { }
+    virtual void generateQmlBasicTypePage(QmlBasicTypeNode* , CodeMarker* ) { }
     virtual void generateDocNode(DocNode* dn, CodeMarker* marker);
-    virtual void generateInheritedBy(const ClassNode *classe,
-                                     CodeMarker *marker);
-    virtual void generateInherits(const ClassNode *classe,
-                                  CodeMarker *marker);
+    virtual void generateCollectionNode(CollectionNode* cn, CodeMarker* marker);
+    virtual void generateInheritedBy(const ClassNode *classe, CodeMarker *marker);
+    virtual void generateInherits(const ClassNode *classe, CodeMarker *marker);
     virtual void generateInnerNode(InnerNode* node);
     virtual void generateMaintainerList(const InnerNode* node, CodeMarker* marker);
     virtual void generateQmlInheritedBy(const QmlClassNode* qcn, CodeMarker* marker);
-    virtual void generateQmlInherits(const QmlClassNode* qcn, CodeMarker* marker);
+    virtual void generateQmlInherits(QmlClassNode* qcn, CodeMarker* marker);
     virtual bool generateQmlText(const Text& text,
                                  const Node *relative,
                                  CodeMarker *marker,
                                  const QString& qmlName);
-    virtual bool generateText(const Text& text,
-                              const Node *relative,
-                              CodeMarker *marker);
+    virtual bool generateText(const Text& text, const Node *relative, CodeMarker *marker);
     virtual QString imageFileName(const Node *relative, const QString& fileBase);
     virtual int skipAtoms(const Atom *atom, Atom::Type type) const;
     virtual QString typeString(const Node *node);
@@ -158,7 +150,6 @@ protected:
     void generateSince(const Node *node, CodeMarker *marker);
     void generateStatus(const Node *node, CodeMarker *marker);
     void generateThreadSafeness(const Node *node, CodeMarker *marker);
-    QString getCollisionLink(const Atom* atom);
     QString getMetadataElement(const InnerNode* inner, const QString& t);
     QStringList getMetadataElements(const InnerNode* inner, const QString& t);
     QString indent(int level, const QString& markedCode);
@@ -176,7 +167,6 @@ protected:
     void unknownAtom(const Atom *atom);
     void appendSortedQmlNames(Text& text, const Node* base, const NodeList& subs);
 
-    QList<NameCollisionNode*> collisionNodes;
     QMap<QString, QStringList> editionGroupMap;
     QMap<QString, QStringList> editionModuleMap;
     QString naturalLanguage;
@@ -211,6 +201,7 @@ private:
     static QString project;
     static QString outDir_;
     static QString outSubdir_;
+    static QStringList outFileNames_;
     static QSet<QString> outputFormats;
     static QHash<QString, QString> outputPrefixes;
     static QStringList scriptDirs;
@@ -219,6 +210,7 @@ private:
     static QStringList styleFiles;
     static bool debugging_;
     static bool noLinkErrors_;
+    static bool autolinkErrors_;
     static bool redirectDocumentationToDevNull_;
     static Passes qdocPass_;
     static bool useOutputSubdirs_;
diff --git a/src/tools/qdoc/helpprojectwriter.cpp b/src/tools/qdoc/helpprojectwriter.cpp
index d46f887518..aea05c1ab2 100644
--- a/src/tools/qdoc/helpprojectwriter.cpp
+++ b/src/tools/qdoc/helpprojectwriter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -131,22 +123,23 @@ void HelpProjectWriter::readSelectors(SubProject &subproject, const QStringList
     typeHash["function"] = Node::Function;
     typeHash["property"] = Node::Property;
     typeHash["variable"] = Node::Variable;
+    typeHash["group"] = Node::Group;
+    typeHash["module"] = Node::Module;
+    typeHash["qmlmodule"] = Node::QmlModule;
     typeHash["qmlproperty"] = Node::QmlProperty;
     typeHash["qmlsignal"] = Node::QmlSignal;
     typeHash["qmlsignalhandler"] = Node::QmlSignalHandler;
     typeHash["qmlmethod"] = Node::QmlMethod;
     typeHash["qmlpropertygroup"] = Node::QmlPropertyGroup;
+    typeHash["qmlclass"] = Node::QmlType;
+    typeHash["qmlbasictype"] = Node::QmlBasicType;
 
     QHash<QString, Node::SubType> subTypeHash;
     subTypeHash["example"] = Node::Example;
     subTypeHash["headerfile"] = Node::HeaderFile;
     subTypeHash["file"] = Node::File;
-    subTypeHash["group"] = Node::Group;
-    subTypeHash["module"] = Node::Module;
     subTypeHash["page"] = Node::Page;
     subTypeHash["externalpage"] = Node::ExternalPage;
-    subTypeHash["qmlclass"] = Node::QmlClass;
-    subTypeHash["qmlbasictype"] = Node::QmlBasicType;
 
     QSet<Node::SubType> allSubTypes = QSet<Node::SubType>::fromList(subTypeHash.values());
 
@@ -210,16 +203,14 @@ QStringList HelpProjectWriter::keywordDetails(const Node *node) const
         // "id"
         details << node->parent()->name()+"::"+node->name();
     }
-    else if (node->type() == Node::Document) {
+    else if (node->isQmlType() || node->isQmlBasicType()) {
+        details << node->name();
+        details << "QML." + node->name();
+    }
+    else if (node->isDocNode()) {
         const DocNode *fake = static_cast<const DocNode *>(node);
-        if (fake->subType() == Node::QmlClass) {
-            details << (QmlClassNode::qmlOnly ? fake->name() : fake->fullTitle());
-            details << "QML." + fake->name();
-        }
-        else {
-            details << fake->fullTitle();
-            details << fake->fullTitle();
-        }
+        details << fake->fullTitle();
+        details << fake->fullTitle();
     }
     else {
         details << node->name();
@@ -247,7 +238,7 @@ bool HelpProjectWriter::generateSection(HelpProject &project,
         return false;
 
     QString objName;
-    if (node->type() == Node::Document) {
+    if (node->isDocNode()) {
         const DocNode *fake = static_cast<const DocNode *>(node);
         objName = fake->fullTitle();
     }
@@ -285,12 +276,28 @@ bool HelpProjectWriter::generateSection(HelpProject &project,
 
     case Node::Class:
         project.keywords.append(keywordDetails(node));
-        project.files.insert(gen_->fullDocumentLocation(node,Generator::useOutputSubdirs()));
+        break;
+    case Node::QmlType:
+    case Node::QmlBasicType:
+        if (node->doc().hasKeywords()) {
+            foreach (const Atom* keyword, node->doc().keywords()) {
+                if (!keyword->string().isEmpty()) {
+                    QStringList details;
+                    details << keyword->string()
+                            << keyword->string()
+                            << gen_->fullDocumentLocation(node,Generator::useOutputSubdirs()) +
+                        QLatin1Char('#') + Doc::canonicalTitle(keyword->string());
+                    project.keywords.append(details);
+                }
+                else
+                    node->doc().location().warning(tr("Bad keyword in %1").arg(gen_->fullDocumentLocation(node,Generator::useOutputSubdirs())));
+            }
+        }
+        project.keywords.append(keywordDetails(node));
         break;
 
     case Node::Namespace:
         project.keywords.append(keywordDetails(node));
-        project.files.insert(gen_->fullDocumentLocation(node,Generator::useOutputSubdirs()));
         break;
 
     case Node::Enum:
@@ -316,6 +323,33 @@ bool HelpProjectWriter::generateSection(HelpProject &project,
     }
         break;
 
+    case Node::Group:
+    case Node::Module:
+    case Node::QmlModule:
+        {
+            const CollectionNode* cn = static_cast<const CollectionNode*>(node);
+            if (!cn->fullTitle().isEmpty()) {
+                if (cn->doc().hasKeywords()) {
+                    foreach (const Atom* keyword, cn->doc().keywords()) {
+                        if (!keyword->string().isEmpty()) {
+                            QStringList details;
+                            details << keyword->string()
+                                    << keyword->string()
+                                    << gen_->fullDocumentLocation(node, Generator::useOutputSubdirs()) +
+                                       QLatin1Char('#') + Doc::canonicalTitle(keyword->string());
+                            project.keywords.append(details);
+                        }
+                        else
+                            cn->doc().location().warning(
+                                      tr("Bad keyword in %1").arg(gen_->fullDocumentLocation(node,Generator::useOutputSubdirs()))
+                                     );
+                    }
+                }
+                project.keywords.append(keywordDetails(node));
+            }
+        }
+        break;
+
     case Node::Property:
     case Node::QmlProperty:
     case Node::QmlSignal:
@@ -342,7 +376,6 @@ bool HelpProjectWriter::generateSection(HelpProject &project,
 
         if (node->relates()) {
             project.memberStatus[node->relates()].insert(node->status());
-            project.files.insert(gen_->fullDocumentLocation(node->relates(),Generator::useOutputSubdirs()));
         } else if (node->parent())
             project.memberStatus[node->parent()].insert(node->status());
     }
@@ -364,8 +397,6 @@ bool HelpProjectWriter::generateSection(HelpProject &project,
 
     case Node::Variable:
     {
-        QString location = gen_->fullDocumentLocation(node,Generator::useOutputSubdirs());
-        project.files.insert(location.left(location.lastIndexOf(QLatin1Char('#'))));
         project.keywords.append(keywordDetails(node));
     }
         break;
@@ -396,7 +427,6 @@ bool HelpProjectWriter::generateSection(HelpProject &project,
                 }
                 project.keywords.append(keywordDetails(node));
             }
-            project.files.insert(gen_->fullDocumentLocation(node,Generator::useOutputSubdirs()));
         }
         break;
     }
@@ -467,8 +497,6 @@ void HelpProjectWriter::generateSections(HelpProject &project,
                 project.memberStatus[node].insert(childNode->status());
                 if (childNode->relates()) {
                     project.memberStatus[childNode->relates()].insert(childNode->status());
-                    project.files.insert(gen_->fullDocumentLocation(childNode->relates(),
-                                                                    Generator::useOutputSubdirs()));
                 }
 
                 if (childNode->type() == Node::Function) {
@@ -479,11 +507,6 @@ void HelpProjectWriter::generateSections(HelpProject &project,
                 childMap[childNode->fullDocumentName()] = childNode;
             }
         }
-        // Insert files for all/compatibility/obsolete members
-        addMembers(project, writer, node, false);
-        if (node->relates())
-            addMembers(project, writer, node->relates(), false);
-
         foreach (const Node *child, childMap)
             generateSections(project, writer, child);
     }
@@ -518,44 +541,34 @@ void HelpProjectWriter::writeSection(QXmlStreamWriter &writer, const QString &pa
 }
 
 /*
-    Add files for all members, compatibility members and obsolete members
-    Also write subsections for these depending on 'writeSections' (default=true).
+    Write subsections for all members, compatibility members and obsolete members.
 */
 void HelpProjectWriter::addMembers(HelpProject &project, QXmlStreamWriter &writer,
-                                          const Node *node, bool writeSections)
+                                          const Node *node)
 {
     QString href = gen_->fullDocumentLocation(node,Generator::useOutputSubdirs());
     href = href.left(href.size()-5);
     if (href.isEmpty())
         return;
 
-    Node::SubType subType = static_cast<const DocNode*>(node)->subType();
-
     bool derivedClass = false;
     if (node->type() == Node::Class)
         derivedClass = !(static_cast<const ClassNode *>(node)->baseClasses().isEmpty());
 
     // Do not generate a 'List of all members' for namespaces or header files,
     // but always generate it for derived classes and QML classes
-    if (node->type() != Node::Namespace && subType != Node::HeaderFile &&
-            (derivedClass || subType == Node::QmlClass ||
-             !project.memberStatus[node].isEmpty())) {
+    if (!node->isNamespace() && !node->isHeaderFile() &&
+        (derivedClass || node->isQmlType() || !project.memberStatus[node].isEmpty())) {
         QString membersPath = href + QStringLiteral("-members.html");
-        project.files.insert(membersPath);
-        if (writeSections)
-            writeSection(writer, membersPath, tr("List of all members"));
+        writeSection(writer, membersPath, tr("List of all members"));
     }
     if (project.memberStatus[node].contains(Node::Compat)) {
         QString compatPath = href + QStringLiteral("-compat.html");
-        project.files.insert(compatPath);
-        if (writeSections)
-            writeSection(writer, compatPath, tr("Compatibility members"));
+        writeSection(writer, compatPath, tr("Compatibility members"));
     }
     if (project.memberStatus[node].contains(Node::Obsolete)) {
         QString obsoletePath = href + QStringLiteral("-obsolete.html");
-        project.files.insert(obsoletePath);
-        if (writeSections)
-            writeSection(writer, obsoletePath, tr("Obsolete members"));
+        writeSection(writer, obsoletePath, tr("Obsolete members"));
     }
 }
 
@@ -583,6 +596,14 @@ void HelpProjectWriter::writeNode(HelpProject &project, QXmlStreamWriter &writer
         writeSection(writer, href, objName);
         break;
 
+    case Node::QmlType:
+        writer.writeStartElement("section");
+        writer.writeAttribute("ref", href);
+        writer.writeAttribute("title", tr("%1 Type Reference").arg(node->fullTitle()));
+        addMembers(project, writer, node);
+        writer.writeEndElement(); // section
+        break;
+
     case Node::Document: {
         // Document nodes (such as manual pages) contain subtypes, titles and other
         // attributes.
@@ -590,17 +611,25 @@ void HelpProjectWriter::writeNode(HelpProject &project, QXmlStreamWriter &writer
 
         writer.writeStartElement("section");
         writer.writeAttribute("ref", href);
-        if (docNode->subType() == Node::QmlClass)
-            writer.writeAttribute("title", tr("%1 Type Reference").arg(docNode->fullTitle()));
-        else
-            writer.writeAttribute("title", docNode->fullTitle());
+        writer.writeAttribute("title", docNode->fullTitle());
 
-        if ((docNode->subType() == Node::HeaderFile) || (docNode->subType() == Node::QmlClass))
+        if (docNode->subType() == Node::HeaderFile)
             addMembers(project, writer, node);
 
         writer.writeEndElement(); // section
     }
         break;
+    case Node::Group:
+    case Node::Module:
+    case Node::QmlModule:
+        {
+            const CollectionNode* cn = static_cast<const CollectionNode*>(node);
+            writer.writeStartElement("section");
+            writer.writeAttribute("ref", href);
+            writer.writeAttribute("title", cn->fullTitle());
+            writer.writeEndElement(); // section
+        }
+        break;
     default:
         ;
     }
@@ -609,10 +638,15 @@ void HelpProjectWriter::writeNode(HelpProject &project, QXmlStreamWriter &writer
 void HelpProjectWriter::generateProject(HelpProject &project)
 {
     const Node *rootNode;
+
+    // Restrict searching only to the local (primary) tree
+    QVector<Tree*> searchOrder = qdb_->searchOrder();
+    qdb_->setLocalSearch();
+
     if (!project.indexRoot.isEmpty())
         rootNode = qdb_->findDocNodeByTitle(project.indexRoot);
     else
-        rootNode = qdb_->treeRoot();
+        rootNode = qdb_->primaryTreeRoot();
 
     if (!rootNode)
         return;
@@ -655,16 +689,14 @@ void HelpProjectWriter::generateProject(HelpProject &project)
     writer.writeStartElement("section");
     const Node* node = qdb_->findDocNodeByTitle(project.indexTitle);
     if (node == 0)
-        node = qdb_->findNode(QStringList("index.html"));
+        node = qdb_->findNodeByNameAndType(QStringList("index.html"), Node::Document);
     QString indexPath;
-    // Never use a collision node as a landing page
-    if (node && !node->isCollisionNode())
+    if (node)
         indexPath = gen_->fullDocumentLocation(node,Generator::useOutputSubdirs());
     else
         indexPath = "index.html";
     writer.writeAttribute("ref", indexPath);
     writer.writeAttribute("title", project.indexTitle);
-    project.files.insert(gen_->fullDocumentLocation(rootNode));
 
     generateSections(project, writer, rootNode);
 
@@ -673,7 +705,7 @@ void HelpProjectWriter::generateProject(HelpProject &project)
 
         if (subproject.type == QLatin1String("manual")) {
 
-            const DocNode *indexPage = qdb_->findDocNodeByTitle(subproject.indexTitle);
+            const Node *indexPage = qdb_->findNodeForTarget(subproject.indexTitle, 0);
             if (indexPage) {
                 Text indexBody = indexPage->doc().body();
                 const Atom *atom = indexBody.firstAtom();
@@ -700,13 +732,12 @@ void HelpProjectWriter::generateProject(HelpProject &project)
                             if (sectionStack.top() > 0)
                                 writer.writeEndElement(); // section
 
-                            const DocNode *page = qdb_->findDocNodeByTitle(atom->string());
+                            const Node *page = qdb_->findNodeForTarget(atom->string(), 0);
                             writer.writeStartElement("section");
                             QString indexPath = gen_->fullDocumentLocation(page,
                                                                            Generator::useOutputSubdirs());
                             writer.writeAttribute("ref", indexPath);
                             writer.writeAttribute("title", atom->string());
-                            project.files.insert(indexPath);
 
                             sectionStack.top() += 1;
                         }
@@ -728,10 +759,10 @@ void HelpProjectWriter::generateProject(HelpProject &project)
 
             if (!name.isEmpty()) {
                 writer.writeStartElement("section");
-                QString indexPath = gen_->fullDocumentLocation(qdb_->findDocNodeByTitle(subproject.indexTitle),Generator::useOutputSubdirs());
+                QString indexPath = gen_->fullDocumentLocation(qdb_->findNodeForTarget(subproject.indexTitle, 0),
+                                                               Generator::useOutputSubdirs());
                 writer.writeAttribute("ref", indexPath);
                 writer.writeAttribute("title", subproject.title);
-                project.files.insert(indexPath);
             }
             if (subproject.sortPages) {
                 QStringList titles = subproject.nodes.keys();
@@ -748,7 +779,7 @@ void HelpProjectWriter::generateProject(HelpProject &project)
                     if (!nextTitle.isEmpty() &&
                             node->links().value(Node::ContentsLink).first.isEmpty()) {
 
-                        DocNode *nextPage = const_cast<DocNode *>(qdb_->findDocNodeByTitle(nextTitle));
+                        const Node *nextPage = qdb_->findNodeForTarget(nextTitle, 0);
 
                         // Write the contents node.
                         writeNode(project, writer, node);
@@ -758,7 +789,7 @@ void HelpProjectWriter::generateProject(HelpProject &project)
                             nextTitle = nextPage->links().value(Node::NextLink).first;
                             if (nextTitle.isEmpty() || visited.contains(nextTitle))
                                 break;
-                            nextPage = const_cast<DocNode *>(qdb_->findDocNodeByTitle(nextTitle));
+                            nextPage = qdb_->findNodeForTarget(nextTitle, 0);
                             visited.insert(nextTitle);
                         }
                         break;
@@ -771,6 +802,9 @@ void HelpProjectWriter::generateProject(HelpProject &project)
         }
     }
 
+    // Restore original search order
+    qdb_->setSearchOrder(searchOrder);
+
     writer.writeEndElement(); // section
     writer.writeEndElement(); // toc
 
@@ -785,12 +819,16 @@ void HelpProjectWriter::generateProject(HelpProject &project)
     writer.writeEndElement(); // keywords
 
     writer.writeStartElement("files");
-    foreach (const QString &usedFile, project.files) {
+
+    // The list of files to write is the union of generated files and
+    // other files (images and extras) included in the project
+    QSet<QString> files = QSet<QString>::fromList(gen_->outputFileNames());
+    files.unite(project.files);
+    files.unite(project.extraFiles);
+    foreach (const QString &usedFile, files) {
         if (!usedFile.isEmpty())
             writer.writeTextElement("file", usedFile);
     }
-    foreach (const QString &usedFile, project.extraFiles)
-        writer.writeTextElement("file", usedFile);
     writer.writeEndElement(); // files
 
     writer.writeEndElement(); // filterSection
diff --git a/src/tools/qdoc/helpprojectwriter.h b/src/tools/qdoc/helpprojectwriter.h
index 5dfa12cf73..2519e62c13 100644
--- a/src/tools/qdoc/helpprojectwriter.h
+++ b/src/tools/qdoc/helpprojectwriter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -106,7 +98,7 @@ private:
     void writeNode(HelpProject &project, QXmlStreamWriter &writer, const Node *node);
     void readSelectors(SubProject &subproject, const QStringList &selectors);
     void addMembers(HelpProject &project, QXmlStreamWriter &writer,
-                           const Node *node, bool writeSections = true);
+                           const Node *node);
     void writeSection(QXmlStreamWriter &writer, const QString &path,
                             const QString &value);
 
diff --git a/src/tools/qdoc/htmlgenerator.cpp b/src/tools/qdoc/htmlgenerator.cpp
index d1bf34f8e1..0171897a85 100644
--- a/src/tools/qdoc/htmlgenerator.cpp
+++ b/src/tools/qdoc/htmlgenerator.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -169,6 +161,9 @@ void HtmlGenerator::initializeGenerator(const Config &config)
     noNavigationBar = config.getBool(HtmlGenerator::format() +
                                    Config::dot +
                                    HTMLGENERATOR_NONAVIGATIONBAR);
+    tocDepth = config.getInt(HtmlGenerator::format() +
+                              Config::dot +
+                              HTMLGENERATOR_TOCDEPTH);
 
     project = config.getString(CONFIG_PROJECT);
 
@@ -264,18 +259,15 @@ QString HtmlGenerator::format()
 }
 
 /*!
-  Traverses the database generating all the HTML documentation.
+  Traverses the current tree generating all the HTML documentation.
  */
-void HtmlGenerator::generateTree()
+void HtmlGenerator::generateDocs()
 {
-    qdb_->buildCollections();
-    Node* qflags = qdb_->findNodeByNameAndType(QStringList("QFlags"), Node::Class, Node::NoSubType);
+    Node* qflags = qdb_->findClassNode(QStringList("QFlags"));
     if (qflags)
         qflagsHref_ = linkForNode(qflags,0);
-    if (!runPrepareOnly()) {
-        Generator::generateTree();
-        generateCollisionPages();
-    }
+    if (!runPrepareOnly())
+        Generator::generateDocs();
 
     if (!runGenerateOnly()) {
         QString fileBase = project.toLower().simplified().replace(QLatin1Char(' '), QLatin1Char('-'));
@@ -304,9 +296,6 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
     int skipAhead = 0;
     static bool in_para = false;
 
-    if (Generator::debugging()) {
-        atom->dump();
-    }
     switch (atom->type()) {
     case Atom::AbstractLeft:
         if (relative)
@@ -319,15 +308,22 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
     case Atom::AutoLink:
         if (!inLink_ && !inContents_ && !inSectionHeading_) {
             const Node *node = 0;
-            QString link = getLink(atom, relative, &node);
-            if (!link.isEmpty()) {
+            QString link = getAutoLink(atom, relative, &node);
+            if (link.isEmpty()) {
+                if (autolinkErrors())
+                    relative->doc().location().warning(tr("Can't autolink to '%1'").arg(atom->string()));
+            }
+            else if (node && node->status() == Node::Obsolete) {
+                if ((relative->parent() != node) && !relative->isObsolete())
+                    link.clear();
+            }
+            if (link.isEmpty())
+                out() << protectEnc(atom->string());
+            else {
                 beginLink(link, node, relative);
                 generateLink(atom, marker);
                 endLink();
             }
-            else {
-                out() << protectEnc(atom->string());
-            }
         }
         else {
             out() << protectEnc(atom->string());
@@ -336,11 +332,11 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
     case Atom::BaseName:
         break;
     case Atom::BriefLeft:
-        if (relative->type() == Node::Document) {
-            if (relative->subType() != Node::Example) {
-                skipAhead = skipAtoms(atom, Atom::BriefRight);
-                break;
-            }
+        // Do not output the brief for QML nodes, doc nodes or collections
+        // (groups, modules, qml module nodes)
+        if (relative->isQmlType() || relative->isDocNode() || relative->isCollectionNode()) {
+            skipAhead = skipAtoms(atom, Atom::BriefRight);
+            break;
         }
 
         out() << "<p>";
@@ -374,7 +370,7 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
         }
         break;
     case Atom::BriefRight:
-        if (relative->type() != Node::Document)
+        if (!relative->isDocNode())
             out() << "</p>\n";
         break;
     case Atom::C:
@@ -485,9 +481,9 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
         break;
     case Atom::AnnotatedList:
         {
-            DocNode* dn = qdb_->getGroup(atom->string());
-            if (dn)
-                generateAnnotatedList(relative, marker, dn->members());
+            GroupNode* gn = qdb_->getGroup(atom->string());
+            if (gn)
+                generateList(gn, marker, atom->string());
         }
         break;
     case Atom::GeneratedList:
@@ -495,19 +491,25 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
             generateAnnotatedList(relative, marker, qdb_->getCppClasses());
         }
         else if (atom->string() == "classes") {
-            generateCompactList(Generic, relative, qdb_->getCppClasses(), true, QStringLiteral("Q"));
+            generateCompactList(Generic, relative, qdb_->getCppClasses(), true, QStringLiteral(""));
+        }
+        else if (atom->string().contains("classes ")) {
+            QString rootName = atom->string().mid(atom->string().indexOf("classes") + 7).trimmed();
+            generateCompactList(Generic, relative, qdb_->getCppClasses(), true, rootName);
+        }
+        else if (atom->string() == "qmlbasictypes") {
+            generateCompactList(Generic, relative, qdb_->getQmlBasicTypes(), true, QStringLiteral(""));
         }
         else if (atom->string() == "qmltypes") {
             generateCompactList(Generic, relative, qdb_->getQmlTypes(), true, QStringLiteral(""));
         }
         else if (atom->string().contains("classesbymodule")) {
-            QString arg = atom->string().trimmed();
             QString moduleName = atom->string().mid(atom->string().indexOf("classesbymodule") + 15).trimmed();
             QDocDatabase* qdb = QDocDatabase::qdocDB();
-            DocNode* dn = qdb->findModule(moduleName);
-            if (dn) {
+            ModuleNode* mn = qdb->findModule(moduleName);
+            if (mn) {
                 NodeMap m;
-                dn->getMemberClasses(m);
+                mn->getMemberClasses(m);
                 if (!m.isEmpty()) {
                     generateAnnotatedList(relative, marker, m);
                 }
@@ -550,16 +552,25 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
             generateCompactList(Generic, relative, qdb_->getServiceClasses(), false, QStringLiteral("Q"));
         }
         else if (atom->string() == "overviews") {
-            generateOverviewList(relative);
+            generateList(relative, marker, "overviews");
+        }
+        else if (atom->string() == "cpp-modules") {
+            generateList(relative, marker, "cpp-modules");
+        }
+        else if (atom->string() == "qml-modules") {
+            generateList(relative, marker, "qml-modules");
         }
         else if (atom->string() == "namespaces") {
             generateAnnotatedList(relative, marker, qdb_->getNamespaces());
         }
         else if (atom->string() == "related") {
-            const DocNode *dn = static_cast<const DocNode *>(relative);
-            if (dn)
-                generateAnnotatedList(dn, marker, dn->members());
+            generateList(relative, marker, "related");
         }
+#if 0
+        /*
+          This is not used in Qt5, as of 10/02/2014
+          Remove permanently if it is not missed.
+         */
         else if (atom->string() == "relatedinline") {
             const DocNode *dn = static_cast<const DocNode *>(relative);
             if (dn && !dn->members().isEmpty()) {
@@ -573,6 +584,7 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
                     generateBody(node, marker);
             }
         }
+#endif
         break;
     case Atom::SinceList:
     {
@@ -591,10 +603,8 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
             while (n != nsmap.constEnd()) {
                 const Node* node = n.value();
                 switch (node->type()) {
-                case Node::Document:
-                    if (node->subType() == Node::QmlClass) {
-                        sections[QmlClass].appendMember((Node*)node);
-                    }
+                case Node::QmlType:
+                    sections[QmlClass].appendMember((Node*)node);
                     break;
                 case Node::Namespace:
                     sections[Namespace].appendMember((Node*)node);
@@ -750,8 +760,7 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
                 out() << " alt=\"\"";
             out() << " />";
             helpProjectWriter->addExtraFile(fileName);
-            if ((relative->type() == Node::Document) &&
-                    (relative->subType() == Node::Example)) {
+            if (relative->isExample()) {
                 const ExampleNode* cen = static_cast<const ExampleNode*>(relative);
                 if (cen->imageFileName().isEmpty()) {
                     ExampleNode* en = const_cast<ExampleNode*>(cen);
@@ -794,17 +803,26 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
         break;
     case Atom::Link:
     {
+        inObsoleteLink = false;
         const Node *node = 0;
-        QString myLink = getLink(atom, relative, &node);
-        if (myLink.isEmpty()) {
-            myLink = getCollisionLink(atom);
-            if (myLink.isEmpty() && !noLinkErrors()) {
-                relative->doc().location().warning(tr("Can't link to '%1'").arg(atom->string()));
+        QString link = getLink(atom, relative, &node);
+        if (link.isEmpty() && (node != relative) && !noLinkErrors()) {
+            relative->doc().location().warning(tr("Can't link to '%1'").arg(atom->string()));
+        }
+        else {
+            node = 0;
+            if (node && node->status() == Node::Obsolete) {
+                if ((relative->parent() != node) && !relative->isObsolete()) {
+                    inObsoleteLink = true;
+                    if (obsoleteLinks) {
+                        relative->doc().location().warning(tr("Link to obsolete item '%1' in %2")
+                                                           .arg(atom->string())
+                                                           .arg(relative->plainFullName()));
+                    }
+                }
             }
-            else
-                node = 0;
         }
-        beginLink(myLink, node, relative);
+        beginLink(link, node, relative);
         skipAhead = 1;
     }
         break;
@@ -827,21 +845,24 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
             out() << "<dl>\n";
         }
         else if (atom->string() == ATOM_LIST_VALUE) {
+            out() << "<table class=\"valuelist\">";
             threeColumnEnumValueTable_ = isThreeColumnEnumValueTable(atom);
             if (threeColumnEnumValueTable_) {
-                out() << "<table class=\"valuelist\">";
                 if (++numTableRows_ % 2 == 1)
                     out() << "<tr valign=\"top\" class=\"odd\">";
                 else
                     out() << "<tr valign=\"top\" class=\"even\">";
 
-                out() << "<th class=\"tblConst\">Constant</th>"
-                      << "<th class=\"tblval\">Value</th>"
-                      << "<th class=\"tbldscr\">Description</th></tr>\n";
+                out() << "<th class=\"tblConst\">Constant</th>";
+
+                // If not in \enum topic, skip the value column
+                if (relative->type() == Node::Enum)
+                    out() << "<th class=\"tblval\">Value</th>";
+
+                out() << "<th class=\"tbldscr\">Description</th></tr>\n";
             }
             else {
-                out() << "<table class=\"valuelist\">"
-                      << "<tr><th class=\"tblConst\">Constant</th><th class=\"tblVal\">Value</th></tr>\n";
+                out() << "<tr><th class=\"tblConst\">Constant</th><th class=\"tblVal\">Value</th></tr>\n";
             }
         }
         else {
@@ -876,19 +897,18 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
             // ### Trenton
 
             QString t= protectEnc(plainCode(marker->markedUpEnumValue(atom->next()->string(),relative)));
-            out() << "<tr><td class=\"topAlign\"><tt>" << t << "</tt></td><td class=\"topAlign\">";
+            out() << "<tr><td class=\"topAlign\"><tt>" << t << "</tt>";
 
-            QString itemValue;
             if (relative->type() == Node::Enum) {
+                out() << "</td><td class=\"topAlign\">";
                 const EnumNode *enume = static_cast<const EnumNode *>(relative);
-                itemValue = enume->itemValue(atom->next()->string());
-            }
-
-            if (itemValue.isEmpty())
-                out() << '?';
-            else
-                out() << "<tt>" << protectEnc(itemValue) << "</tt>";
+                QString itemValue = enume->itemValue(atom->next()->string());
 
+                if (itemValue.isEmpty())
+                    out() << '?';
+                else
+                    out() << "<tt>" << protectEnc(itemValue) << "</tt>";
+            }
             skipAhead = 1;
         }
         break;
@@ -968,10 +988,16 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
         break;
     case Atom::SectionRight:
         break;
-    case Atom::SectionHeadingLeft:
-        out() << "<h" + QString::number(atom->string().toInt() + hOffset(relative)) + QLatin1Char('>');
+    case Atom::SectionHeadingLeft: {
+        int unit = atom->string().toInt() + hOffset(relative);
+        out() << "<h" + QString::number(unit) + QLatin1Char(' ');
+        if (unit < 3) {
+            out() << "id=\"" << Doc::canonicalTitle(Text::sectionHeading(atom).toString()) << "\"";
+        }
+        out() << ">";
         inSectionHeading_ = true;
         break;
+    }
     case Atom::SectionHeadingRight:
         out() << "</h" + QString::number(atom->string().toInt() + hOffset(relative)) + ">\n";
         inSectionHeading_ = false;
@@ -1117,7 +1143,7 @@ int HtmlGenerator::generateAtom(const Atom *atom, const Node *relative, CodeMark
 }
 
 /*!
-  Generate a reference page for a C++ class.
+  Generate a reference page for a C++ class or a C++ namespace.
  */
 void HtmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
 {
@@ -1189,10 +1215,9 @@ void HtmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
         else {
             if (!s->members.isEmpty()) {
                 // out() << "<hr />\n";
-                out() << "<a name=\""
-                      << registerRef((*s).name.toLower())
-                      << "\"></a>" << divNavTop << "\n";
-                out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
+                QString ref = registerRef((*s).name.toLower());
+                out() << "<a name=\"" << ref << "\"></a>" << divNavTop << "\n";
+                out() << "<h2 id=\"" << ref << "\">" << protectEnc((*s).name) << "</h2>\n";
                 generateSection(s->members, inner, marker, CodeMarker::Summary);
             }
             if (!s->reimpMembers.isEmpty()) {
@@ -1227,13 +1252,14 @@ void HtmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
         out() << "</ul>\n";
     }
 
-    out() << "<a name=\"" << registerRef("details") << "\"></a>" << divNavTop << '\n';
+    QString detailsRef = registerRef("details");
+    out() << "<a name=\"" << detailsRef << "\"></a>" << divNavTop << '\n';
 
     if (!inner->doc().isEmpty()) {
         generateExtractionMark(inner, DetailedDescriptionMark);
         //out() << "<hr />\n"
         out() << "<div class=\"descr\">\n" // QTBUG-9504
-              << "<h2>" << "Detailed Description" << "</h2>\n";
+              << "<h2 id=\"" << detailsRef << "\">" << "Detailed Description" << "</h2>\n";
         generateBody(inner, marker);
         out() << "</div>\n"; // QTBUG-9504
         generateAlsoList(inner, marker);
@@ -1304,115 +1330,103 @@ void HtmlGenerator::generateClassLikeNode(InnerNode* inner, CodeMarker* marker)
 }
 
 /*!
-  We delayed generation of the disambiguation pages until now, after
-  all the other pages have been generated. We do this because we might
-  encounter a link command that tries to link to a target on a QML
-  component page, but the link doesn't specify the module identifer
-  for the component, and the component name without a module
-  identifier is ambiguous. When such a link is found, qdoc can't find
-  the target, so it appends the target to the NameCollisionNode. After
-  the tree has been traversed and all these ambiguous links have been
-  added to the name collision nodes, this function is called. The list
-  of collision nodes is traversed here, and the disambiguation page for
-  each collision is generated. The disambiguation page will not only
-  disambiguate links to the component pages, but it will also disambiguate
-  links to properties, section headers, etc.
+  Generate the HTML page for a QML type. \qcn is the QML type.
+  \marker is the code markeup object.
  */
-void HtmlGenerator::generateCollisionPages()
+void HtmlGenerator::generateQmlTypePage(QmlClassNode* qcn, CodeMarker* marker)
 {
-    if (collisionNodes.isEmpty())
-        return;
+    SubTitleSize subTitleSize = LargeSubTitle;
+    QList<Section>::const_iterator s;
+    QString htmlTitle = qcn->fullTitle() + " QML Type";
+
+    generateHeader(htmlTitle, qcn, marker);
+    QList<Section> sections = marker->qmlSections(qcn, CodeMarker::Summary);
+    generateTableOfContents(qcn, marker, &sections);
+    marker = CodeMarker::markerForLanguage(QLatin1String("QML"));
+    generateTitle(htmlTitle, Text() << qcn->subTitle(), subTitleSize, qcn, marker);
+    generateBrief(qcn, marker);
+    generateQmlRequisites(qcn, marker);
+
+    QString allQmlMembersLink = generateAllQmlMembersFile(qcn, marker);
+    QString obsoleteLink = generateQmlMemberFile(qcn, marker, CodeMarker::Obsolete);
+    if (!allQmlMembersLink.isEmpty() || !obsoleteLink.isEmpty()) {
+        out() << "<ul>\n";
+        if (!allQmlMembersLink.isEmpty()) {
+            out() << "<li><a href=\"" << allQmlMembersLink << "\">"
+                  << "List of all members, including inherited members</a></li>\n";
+        }
+        if (!obsoleteLink.isEmpty()) {
+            out() << "<li><a href=\"" << obsoleteLink << "\">"
+                  << "Obsolete members</a></li>\n";
+        }
+        out() << "</ul>\n";
+    }
 
-    for (int i=0; i<collisionNodes.size(); ++i) {
-        NameCollisionNode* ncn = collisionNodes.at(i);
-        if (!ncn)
-            continue;
+    s = sections.constBegin();
+    while (s != sections.constEnd()) {
+        QString ref = registerRef((*s).name.toLower());
+        out() << "<a name=\"" << ref
+              << "\"></a>" << divNavTop << '\n';
+        out() << "<h2 id=\"" << ref << "\">" << protectEnc((*s).name) << "</h2>\n";
+        generateQmlSummary(*s, qcn, marker);
+        ++s;
+    }
 
-        NodeList collisions;
-        const NodeList& nl = ncn->childNodes();
-        if (!nl.isEmpty()) {
-            NodeList::ConstIterator it = nl.constBegin();
-            while (it != nl.constEnd()) {
-                if (!(*it)->isInternal())
-                    collisions.append(*it);
-                ++it;
-            }
-        }
-        if (collisions.size() <= 1)
-            continue;
+    generateExtractionMark(qcn, DetailedDescriptionMark);
+    QString detailsRef = registerRef("details");
+    out() << "<a name=\"" << detailsRef << "\"></a>" << divNavTop << '\n';
+    out() << "<h2 id=\"" << detailsRef << "\">" << "Detailed Description" << "</h2>\n";
+    generateBody(qcn, marker);
+    ClassNode* cn = qcn->classNode();
+    if (cn)
+        generateQmlText(cn->doc().body(), cn, marker, qcn->name());
+    generateAlsoList(qcn, marker);
+    generateExtractionMark(qcn, EndMark);
+    //out() << "<hr />\n";
 
-        ncn->clearCurrentChild();
-        beginSubPage(ncn, Generator::fileName(ncn));
-        QString fullTitle = ncn->fullTitle();
-        CodeMarker* marker = CodeMarker::markerForFileName(ncn->location().filePath());
-        if (ncn->isQmlNode()) {
-            // Replace the marker with a QML code marker.
-            if (ncn->isQmlNode())
-                marker = CodeMarker::markerForLanguage(QLatin1String("QML"));
+    sections = marker->qmlSections(qcn,CodeMarker::Detailed);
+    s = sections.constBegin();
+    while (s != sections.constEnd()) {
+        out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
+        NodeList::ConstIterator m = (*s).members.constBegin();
+        while (m != (*s).members.constEnd()) {
+            generateDetailedQmlMember(*m, qcn, marker);
+            out() << "<br/>\n";
+            ++m;
         }
+        ++s;
+    }
+    generateFooter(qcn);
+}
 
-        generateHeader(fullTitle, ncn, marker);
-        if (!fullTitle.isEmpty())
-            out() << "<h1 class=\"title\">" << protectEnc(fullTitle) << "</h1>\n";
+/*!
+  Generate the HTML page for the QML basic type represented
+  by the QML basic type node \a qbtn.
+ */
+void HtmlGenerator::generateQmlBasicTypePage(QmlBasicTypeNode* qbtn, CodeMarker* marker)
+{
+    SubTitleSize subTitleSize = LargeSubTitle;
+    QList<Section>::const_iterator s;
+    QString htmlTitle = qbtn->fullTitle() + " QML Basic Type";
 
-        NodeMap nm;
-        for (int i=0; i<collisions.size(); ++i) {
-            Node* n = collisions.at(i);
-            QString t;
-            if (!n->qmlModuleName().isEmpty())
-                t = n->qmlModuleName() + "::";
-            t += protectEnc(fullTitle);
-            nm.insertMulti(t,n);
-        }
-        generateAnnotatedList(ncn, marker, nm);
-
-        QList<QString> targets;
-        if (!ncn->linkTargets().isEmpty()) {
-            QMap<QString,QString>::ConstIterator t = ncn->linkTargets().constBegin();
-            while (t != ncn->linkTargets().constEnd()) {
-                int count = 0;
-                for (int i=0; i<collisions.size(); ++i) {
-                    InnerNode* n = static_cast<InnerNode*>(collisions.at(i));
-                    if (n->findChildNodeByName(t.key())) {
-                        ++count;
-                        if (count > 1) {
-                            targets.append(t.key());
-                            break;
-                        }
-                    }
-                }
-                ++t;
-            }
-        }
-        if (!targets.isEmpty()) {
-            QList<QString>::ConstIterator t = targets.constBegin();
-            while (t != targets.constEnd()) {
-                out() << "<a name=\"" << Doc::canonicalTitle(*t) << "\"></a>";
-                out() << "<h2 class=\"title\">" << protectEnc(*t) << "</h2>\n";
-                out() << "<ul>\n";
-                for (int i=0; i<collisions.size(); ++i) {
-                    InnerNode* n = static_cast<InnerNode*>(collisions.at(i));
-                    Node* p = n->findChildNodeByName(*t);
-                    if (p) {
-                        QString link = linkForNode(p,0);
-                        QString label;
-                        if (!n->qmlModuleName().isEmpty())
-                            label = n->qmlModuleName() + "::";
-                        label += n->name() + "::" + p->name();
-                        out() << "<li>";
-                        out() << "<a href=\"" << link << "\">";
-                        out() << protectEnc(label) << "</a>";
-                        out() << "</li>\n";
-                    }
-                }
-                out() << "</ul>\n";
-                ++t;
-            }
-        }
+    marker = CodeMarker::markerForLanguage(QLatin1String("QML"));
 
-        generateFooter(ncn);
-        endSubPage();
-    }
+    generateHeader(htmlTitle, qbtn, marker);
+    QList<Section> sections = marker->sections(qbtn, CodeMarker::Summary, CodeMarker::Okay);
+    generateTableOfContents(qbtn,marker,&sections);
+    generateTitle(htmlTitle,
+                  Text() << qbtn->subTitle(),
+                  subTitleSize,
+                  qbtn,
+                  marker);
+    generateExtractionMark(qbtn, DetailedDescriptionMark);
+    out() << "<div class=\"descr\"> <a name=\"" << registerRef("details") << "\"></a>\n"; // QTBUG-9504
+
+    generateBody(qbtn, marker);
+    out() << "</div>\n"; // QTBUG-9504
+    generateAlsoList(qbtn, marker);
+    generateExtractionMark(qbtn, EndMark);
+    generateFooter(qbtn);
 }
 
 /*!
@@ -1437,31 +1451,13 @@ void HtmlGenerator::generateDocNode(DocNode* dn, CodeMarker* marker)
     QList<Section>::const_iterator s;
     QString fullTitle = dn->fullTitle();
 
-    if (dn->subType() == Node::QmlBasicType) {
-        fullTitle = "QML Basic Type: " + fullTitle;
-
-        // Replace the marker with a QML code marker.
-        marker = CodeMarker::markerForLanguage(QLatin1String("QML"));
-    }
-    else if (dn->subType() == Node::QmlClass) {
-        fullTitle = fullTitle + " QML Type";
-    }
-
     generateHeader(fullTitle, dn, marker);
     /*
       Generate the TOC for the new doc format.
       Don't generate a TOC for the home page.
     */
-    QmlClassNode* qml_cn = 0;
-    if (dn->subType() == Node::QmlClass) {
-        qml_cn = static_cast<QmlClassNode*>(dn);
-        sections = marker->qmlSections(qml_cn,CodeMarker::Summary);
-        generateTableOfContents(dn,marker,&sections);
-
-        // Replace the marker with a QML code marker.
-        marker = CodeMarker::markerForLanguage(QLatin1String("QML"));
-    }
-    else if (dn->subType() != Node::Collision && dn->name() != QString("index.html") && dn->name() != QString("qtexamplesandtutorials.html"))
+    if ((dn->name() != QString("index.html")) &&
+        (dn->name() != QString("qtexamplesandtutorials.html")))
         generateTableOfContents(dn,marker,0);
 
     generateTitle(fullTitle,
@@ -1470,29 +1466,7 @@ void HtmlGenerator::generateDocNode(DocNode* dn, CodeMarker* marker)
                   dn,
                   marker);
 
-    if (dn->subType() == Node::Module) {
-        // Generate brief text and status for modules.
-        generateBrief(dn, marker);
-        generateStatus(dn, marker);
-        generateSince(dn, marker);
-
-        NodeMap nm;
-        dn->getMemberNamespaces(nm);
-        if (!nm.isEmpty()) {
-            out() << "<a name=\"" << registerRef("namespaces") << "\"></a>" << divNavTop << '\n';
-            out() << "<h2>Namespaces</h2>\n";
-            generateAnnotatedList(dn, marker, nm);
-        }
-        nm.clear();
-        dn->getMemberClasses(nm);
-        if (!nm.isEmpty()) {
-            out() << "<a name=\"" << registerRef("classes") << "\"></a>" << divNavTop << '\n';
-            out() << "<h2>Classes</h2>\n";
-            generateAnnotatedList(dn, marker, nm);
-        }
-        nm.clear();
-    }
-    else if (dn->subType() == Node::HeaderFile) {
+    if (dn->subType() == Node::HeaderFile) {
         // Generate brief text and status for modules.
         generateBrief(dn, marker);
         generateStatus(dn, marker);
@@ -1522,88 +1496,115 @@ void HtmlGenerator::generateDocNode(DocNode* dn, CodeMarker* marker)
 
         out() << "</ul>\n";
     }
-    else if (dn->subType() == Node::QmlClass) {
-        const_cast<DocNode*>(dn)->setCurrentChild();
-        ClassNode* cn = qml_cn->classNode();
-        generateBrief(qml_cn, marker);
-        generateQmlRequisites(qml_cn, marker);
 
-        QString allQmlMembersLink = generateAllQmlMembersFile(qml_cn, marker);
-        if (!allQmlMembersLink.isEmpty()) {
-            out() << "<ul>\n";
-            out() << "<li><a href=\"" << allQmlMembersLink << "\">"
-                  << "List of all members, including inherited members</a></li>\n";
-            out() << "</ul>\n";
-        }
+    sections = marker->sections(dn, CodeMarker::Summary, CodeMarker::Okay);
+    s = sections.constBegin();
+    while (s != sections.constEnd()) {
+        QString ref = registerRef((*s).name);
+        out() << "<a name=\"" << ref << "\"></a>" << divNavTop << '\n';
+        out() << "<h2 id=\"" << ref << "\">" << protectEnc((*s).name) << "</h2>\n";
+        generateSectionList(*s, dn, marker, CodeMarker::Summary);
+        ++s;
+    }
 
-        s = sections.constBegin();
-        while (s != sections.constEnd()) {
-            out() << "<a name=\"" << registerRef((*s).name.toLower())
-                  << "\"></a>" << divNavTop << '\n';
-            out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
-            generateQmlSummary(*s,dn,marker);
-            ++s;
-        }
+    generateExtractionMark(dn, DetailedDescriptionMark);
+    out() << "<div class=\"descr\"> <a name=\"" << registerRef("details") << "\"></a>\n"; // QTBUG-9504
 
-        generateExtractionMark(dn, DetailedDescriptionMark);
-        out() << "<a name=\"" << registerRef("details") << "\"></a>" << divNavTop << '\n';
-        out() << "<h2>" << "Detailed Description" << "</h2>\n";
-        generateBody(dn, marker);
-        if (cn)
-            generateQmlText(cn->doc().body(), cn, marker, dn->name());
-        generateAlsoList(dn, marker);
-        generateExtractionMark(dn, EndMark);
+    generateBody(dn, marker);
+    out() << "</div>\n"; // QTBUG-9504
+    generateAlsoList(dn, marker);
+    generateExtractionMark(dn, EndMark);
+
+    sections = marker->sections(dn, CodeMarker::Detailed, CodeMarker::Okay);
+    s = sections.constBegin();
+    while (s != sections.constEnd()) {
         //out() << "<hr />\n";
+        out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
 
-        sections = marker->qmlSections(qml_cn,CodeMarker::Detailed);
-        s = sections.constBegin();
-        while (s != sections.constEnd()) {
-            out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
-            NodeList::ConstIterator m = (*s).members.constBegin();
-            while (m != (*s).members.constEnd()) {
-                generateDetailedQmlMember(*m, dn, marker);
-                out() << "<br/>\n";
-                ++m;
-            }
-            ++s;
+        NodeList::ConstIterator m = (*s).members.constBegin();
+        while (m != (*s).members.constEnd()) {
+            generateDetailedMember(*m, dn, marker);
+            ++m;
         }
-        generateFooter(dn);
-        const_cast<DocNode*>(dn)->clearCurrentChild();
-        return;
+        ++s;
+    }
+    generateFooter(dn);
+}
+
+/*!
+  Generate the HTML page for a group, module, or QML module.
+ */
+void HtmlGenerator::generateCollectionNode(CollectionNode* cn, CodeMarker* marker)
+{
+    SubTitleSize subTitleSize = LargeSubTitle;
+    QList<Section> sections;
+    QList<Section>::const_iterator s;
+    QString fullTitle = cn->fullTitle();
+    QString ref;
+
+    generateHeader(fullTitle, cn, marker);
+    generateTableOfContents(cn,marker,0);
+    generateTitle(fullTitle, Text() << cn->subTitle(), subTitleSize, cn, marker);
+
+    if (cn->isModule()) {
+        // Generate brief text and status for modules.
+        generateBrief(cn, marker);
+        generateStatus(cn, marker);
+        generateSince(cn, marker);
+
+        NodeMap nm;
+        cn->getMemberNamespaces(nm);
+        if (!nm.isEmpty()) {
+            ref = registerRef("namespaces");
+            out() << "<a name=\"" << ref << "\"></a>" << divNavTop << '\n';
+            out() << "<h2 id=\"" << ref << "\">Namespaces</h2>\n";
+            generateAnnotatedList(cn, marker, nm);
+        }
+        nm.clear();
+        cn->getMemberClasses(nm);
+        if (!nm.isEmpty()) {
+            ref = registerRef("classes");
+            out() << "<a name=\"" << ref << "\"></a>" << divNavTop << '\n';
+            out() << "<h2 id=\"" << ref << "\">Classes</h2>\n";
+            generateAnnotatedList(cn, marker, nm);
+        }
+        nm.clear();
     }
 
-    sections = marker->sections(dn, CodeMarker::Summary, CodeMarker::Okay);
+    sections = marker->sections(cn, CodeMarker::Summary, CodeMarker::Okay);
     s = sections.constBegin();
     while (s != sections.constEnd()) {
-        out() << "<a name=\"" << registerRef((*s).name) << "\"></a>" << divNavTop << '\n';
-        out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
-        generateSectionList(*s, dn, marker, CodeMarker::Summary);
+        ref = registerRef((*s).name);
+        out() << "<a name=\"" << ref << "\"></a>" << divNavTop << '\n';
+        out() << "<h2 id=\"" << ref << "\">" << protectEnc((*s).name) << "</h2>\n";
+        generateSectionList(*s, cn, marker, CodeMarker::Summary);
         ++s;
     }
 
-    Text brief = dn->doc().briefText();
-    if (dn->subType() == Node::Module && !brief.isEmpty()) {
-        generateExtractionMark(dn, DetailedDescriptionMark);
-        out() << "<a name=\"" << registerRef("details") << "\"></a>" << divNavTop << '\n';
+    Text brief = cn->doc().briefText();
+    if (cn->isModule() && !brief.isEmpty()) {
+        generateExtractionMark(cn, DetailedDescriptionMark);
+        ref = registerRef("details");
+        out() << "<a name=\"" << ref << "\"></a>" << divNavTop << '\n';
         out() << "<div class=\"descr\">\n"; // QTBUG-9504
-        out() << "<h2>" << "Detailed Description" << "</h2>\n";
+        out() << "<h2 id=\"" << ref << "\">" << "Detailed Description" << "</h2>\n";
     }
     else {
-        generateExtractionMark(dn, DetailedDescriptionMark);
+        generateExtractionMark(cn, DetailedDescriptionMark);
         out() << "<div class=\"descr\"> <a name=\"" << registerRef("details") << "\"></a>\n"; // QTBUG-9504
     }
 
-    generateBody(dn, marker);
+    generateBody(cn, marker);
     out() << "</div>\n"; // QTBUG-9504
-    generateAlsoList(dn, marker);
-    generateExtractionMark(dn, EndMark);
+    generateAlsoList(cn, marker);
+    generateExtractionMark(cn, EndMark);
 
-    if ((dn->subType() == Node::Group))
-        generateAnnotatedList(dn, marker, dn->members());
-    else if (dn->subType() == Node::QmlModule)
-        generateAnnotatedList(dn, marker, dn->members());
+    if (cn->isGroup())
+        generateAnnotatedList(cn, marker, cn->members());
+    else if (cn->isQmlModule())
+        generateAnnotatedList(cn, marker, cn->members());
 
-    sections = marker->sections(dn, CodeMarker::Detailed, CodeMarker::Okay);
+    sections = marker->sections(cn, CodeMarker::Detailed, CodeMarker::Okay);
     s = sections.constBegin();
     while (s != sections.constEnd()) {
         //out() << "<hr />\n";
@@ -1611,12 +1612,12 @@ void HtmlGenerator::generateDocNode(DocNode* dn, CodeMarker* marker)
 
         NodeList::ConstIterator m = (*s).members.constBegin();
         while (m != (*s).members.constEnd()) {
-            generateDetailedMember(*m, dn, marker);
+            generateDetailedMember(*m, cn, marker);
             ++m;
         }
         ++s;
     }
-    generateFooter(dn);
+    generateFooter(cn);
 }
 
 /*!
@@ -1650,7 +1651,7 @@ void HtmlGenerator::generateNavigationBar(const QString &title,
                     << Atom(Atom::AutoLink, landingpage)
                     << Atom(Atom::ListItemRight);
 
-    if (node->type() == Node::Class) {
+    if (node->isClass()) {
         const ClassNode *cn = static_cast<const ClassNode *>(node);
         QString name =  node->moduleName();
 
@@ -1667,22 +1668,24 @@ void HtmlGenerator::generateNavigationBar(const QString &title,
                         << Atom(Atom::String, cn->name())
                         << Atom(Atom::ListItemRight);
     }
-    else if (node->type() == Node::Document) {
-        const DocNode *dn = static_cast<const DocNode *>(node);
-        if (node->subType() == Node::QmlClass || node->subType() == Node::QmlBasicType) {
-            if (!qmltypespage.isEmpty())
-                navigationbar << Atom(Atom::ListItemLeft)
-                        << Atom(Atom::Link, qmltypespage)
-                        << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
-                        << Atom(Atom::String, QLatin1String("QML Types"))
-                        << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK)
-                        << Atom(Atom::ListItemRight);
-        }
-        else if (dn && dn->isExampleFile()) {
+    else if (node->isQmlType() || node->isQmlBasicType()) {
+        if (!qmltypespage.isEmpty())
             navigationbar << Atom(Atom::ListItemLeft)
-                          << Atom(Atom::Link, dn->parent()->name())
+                          << Atom(Atom::Link, qmltypespage)
                           << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
-                          << Atom(Atom::String, dn->parent()->title())
+                          << Atom(Atom::String, QLatin1String("QML Types"))
+                          << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK)
+                          << Atom(Atom::ListItemRight)
+                          << Atom(Atom::ListItemLeft)
+                          << Atom(Atom::String, title)
+                          << Atom(Atom::ListItemRight);
+    }
+    else {
+        if (node->isExampleFile()) {
+            navigationbar << Atom(Atom::ListItemLeft)
+                          << Atom(Atom::Link, node->parent()->name())
+                          << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
+                          << Atom(Atom::String, node->parent()->title())
                           << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK)
                           << Atom(Atom::ListItemRight);
 
@@ -1714,13 +1717,48 @@ void HtmlGenerator::generateHeader(const QString& title,
     QString shortVersion = qdb_->version();
     if (shortVersion.count(QChar('.')) == 2)
         shortVersion.truncate(shortVersion.lastIndexOf(QChar('.')));
-    if (!project.isEmpty())
-        shortVersion = QLatin1String(" | ") + project + QLatin1Char(' ') + shortVersion;
+
+    //determine the rest of the <title> element content: "title | titleSuffix version"
+    QString titleSuffix;
+    if (!landingpage.isEmpty()) {
+        //for normal pages: "title | landingpage version"
+        titleSuffix = landingpage;
+    }
+    else if (!homepage.isEmpty()) {
+        //for pages that set the homepage but not landing page: "title | homepage version"
+        if (title != homepage)
+            titleSuffix = homepage;
+    }
+    else if (!project.isEmpty()) {
+        //for projects outside of Qt or Qt 5: "title | project version"
+        if (title != project)
+            titleSuffix = project;
+    }
     else
-        shortVersion = QLatin1String(" | ") + QLatin1String("Qt ") + shortVersion ;
+        //default: "title | Qt version"
+        titleSuffix = QLatin1String("Qt ");
+
+    //for pages that duplicate the title and suffix (landing pages, home pages,
+    // and module landing pages, clear the duplicate
+    if (title == titleSuffix)
+        titleSuffix.clear();
+
+    //for pages that duplicate the version, clear the duplicate
+    if (title.contains(shortVersion) || titleSuffix.contains(shortVersion))
+        shortVersion.clear();
+
+    QString divider;
+    if (!titleSuffix.isEmpty() && !title.isEmpty())
+        divider = QLatin1String(" | ");
 
     // Generating page title
-    out() << "  <title>" << protectEnc(title) << shortVersion << "</title>\n";
+    out() << "  <title>"
+          << protectEnc(title)
+          << divider
+          << titleSuffix
+          << QLatin1Char(' ')
+          << shortVersion
+          << "</title>\n";
 
     // Include style sheet and script links.
     out() << headerStyles;
@@ -1892,7 +1930,7 @@ void HtmlGenerator::generateRequisites(InnerNode *inner, CodeMarker *marker)
     if (inner->type() == Node::Class || inner->type() == Node::Namespace) {
         //add the QT variable to the map
         if (!inner->moduleName().isEmpty()) {
-            DocNode * moduleNode = qdb_->findModule(inner->moduleName());
+            ModuleNode* moduleNode = qdb_->findModule(inner->moduleName());
             if (moduleNode && !moduleNode->qtVariable().isEmpty()) {
                 text.clear();
                 text << Atom(Atom::FormattingLeft, ATOM_FORMATTING_TELETYPE)
@@ -1923,18 +1961,20 @@ void HtmlGenerator::generateRequisites(InnerNode *inner, CodeMarker *marker)
             r = classe->baseClasses().constBegin();
             index = 0;
             while (r != classe->baseClasses().constEnd()) {
-                text << Atom(Atom::LinkNode, CodeMarker::stringForNode((*r).node))
-                     << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
-                     << Atom(Atom::String, (*r).dataTypeWithTemplateArgs)
-                     << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK);
-
-                if ((*r).access == Node::Protected) {
-                    text << " (protected)";
-                }
-                else if ((*r).access == Node::Private) {
-                    text << " (private)";
+                if ((*r).node_) {
+                    text << Atom(Atom::LinkNode, CodeMarker::stringForNode((*r).node_))
+                         << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
+                         << Atom(Atom::String, (*r).signature_)
+                         << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK);
+
+                    if ((*r).access_ == Node::Protected) {
+                        text << " (protected)";
+                    }
+                    else if ((*r).access_ == Node::Private) {
+                        text << " (private)";
+                    }
+                    text << separator(index++, classe->baseClasses().count());
                 }
-                text << separator(index++, classe->baseClasses().count());
                 ++r;
             }
             text << Atom::ParaRight;
@@ -2002,9 +2042,9 @@ void HtmlGenerator::generateQmlRequisites(QmlClassNode *qcn, CodeMarker *marker)
 
     //add the module name and version to the map
     QString qmlModuleVersion;
-    DocNode* dn = qdb_->findQmlModule(qcn->qmlModuleName());
-    if (dn)
-        qmlModuleVersion = dn->qmlModuleVersion();
+    QmlModuleNode* qmn = qdb_->findQmlModule(qcn->qmlModuleName());
+    if (qmn)
+        qmlModuleVersion = qmn->qmlModuleVersion();
     else
         qmlModuleVersion = qcn->qmlModuleVersion();
     text.clear();
@@ -2044,7 +2084,7 @@ void HtmlGenerator::generateQmlRequisites(QmlClassNode *qcn, CodeMarker *marker)
     }
 
     //add the inherits to the map
-    const QmlClassNode* base = qcn->qmlBaseNode();
+    QmlClassNode* base = qcn->qmlBaseNode();
     while (base && base->isInternal()) {
         base = base->qmlBaseNode();
     }
@@ -2136,7 +2176,11 @@ void HtmlGenerator::generateTableOfContents(const Node *node,
     QList<Atom*> toc;
     if (node->doc().hasTableOfContents())
         toc = node->doc().tableOfContents();
-    if (toc.isEmpty() && !sections && (node->subType() != Node::Module))
+    if (toc.isEmpty() && !sections && !node->isModule())
+        return;
+
+    //turn off table of contents if HTML.tocdepth is set to 0
+    if (tocDepth == 0)
         return;
 
     QStringList sectionNumber;
@@ -2151,7 +2195,7 @@ void HtmlGenerator::generateTableOfContents(const Node *node,
     sectionNumber.append("1");
     out() << "<ul>\n";
 
-    if (node->subType() == Node::Module) {
+    if (node->isModule()) {
         if (node->hasNamespaces()) {
             out() << "<li class=\"level"
                   << sectionNumber.size()
@@ -2178,9 +2222,7 @@ void HtmlGenerator::generateTableOfContents(const Node *node,
             }
         }
     }
-    else if (sections && ((node->type() == Node::Class) ||
-                          (node->type() == Node::Namespace) ||
-                          (node->subType() == Node::QmlClass))) {
+    else if (sections && (node->isClass() || node->isNamespace() || node->isQmlType())) {
         QList<Section>::ConstIterator s = sections->constBegin();
         while (s != sections->constEnd()) {
             if (!s->members.isEmpty() || !s->reimpMembers.isEmpty()) {
@@ -2222,18 +2264,23 @@ void HtmlGenerator::generateTableOfContents(const Node *node,
                 sectionNumber.last() = QString::number(sectionNumber.last().toInt() + 1);
             }
         }
-        int numAtoms;
-        Text headingText = Text::sectionHeading(atom);
-        QString s = headingText.toString();
-        out() << "<li class=\"level"
-              << sectionNumber.size()
-              << "\">";
-        out() << "<a href=\""
-              << '#'
-              << Doc::canonicalTitle(s)
-              << "\">";
-        generateAtomList(headingText.firstAtom(), node, marker, true, numAtoms);
-        out() << "</a></li>\n";
+
+        //restrict the ToC depth to the one set by the HTML.tocdepth variable or
+        //print all levels if tocDepth is not set.
+        if (sectionNumber.size() <= tocDepth || tocDepth < 0) {
+            int numAtoms;
+            Text headingText = Text::sectionHeading(atom);
+            QString s = headingText.toString();
+            out() << "<li class=\"level"
+                  << sectionNumber.size()
+                  << "\">";
+            out() << "<a href=\""
+                  << '#'
+                  << Doc::canonicalTitle(s)
+                  << "\">";
+            generateAtomList(headingText.firstAtom(), node, marker, true, numAtoms);
+            out() << "</a></li>\n";
+        }
     }
     while (!sectionNumber.isEmpty()) {
         sectionNumber.removeLast();
@@ -2278,8 +2325,7 @@ QString HtmlGenerator::generateListOfAllMemberFile(const InnerNode *inner,
   the members of QML class \a qml_cn, including the inherited
   members. The \a marker is used for formatting stuff.
  */
-QString HtmlGenerator::generateAllQmlMembersFile(const QmlClassNode* qml_cn,
-                                                 CodeMarker* marker)
+QString HtmlGenerator::generateAllQmlMembersFile(QmlClassNode* qml_cn, CodeMarker* marker)
 {
     QList<Section> sections;
     QList<Section>::ConstIterator s;
@@ -2324,6 +2370,8 @@ QString HtmlGenerator::generateAllQmlMembersFile(const QmlClassNode* qml_cn,
                     prefix = prefix.left(keys.at(j).indexOf("::")+1);
                 }
                 generateQmlItem(nodes[j], qcn, marker, true);
+                if (nodes[j]->isAttached())
+                    out() << " [attached]";
                 //generateSynopsis(nodes[j], qcn, marker, CodeMarker::Subpage, false, &prefix);
                 out() << "</li>\n";
             }
@@ -2416,6 +2464,85 @@ QString HtmlGenerator::generateLowStatusMemberFile(InnerNode *inner,
     return fileName;
 }
 
+/*!
+  Generates a separate file where certain members of the QML
+  type \a qcn are listed. The \a marker is used to generate
+  the section lists, which are then traversed and output here.
+
+  Note that this function currently only handles correctly the
+  case where \a status is \c {CodeMarker::Obsolete}.
+ */
+QString HtmlGenerator::generateQmlMemberFile(QmlClassNode* qcn,
+                                             CodeMarker *marker,
+                                             CodeMarker::Status status)
+{
+    QList<Section> sections = marker->qmlSections(qcn, CodeMarker::Summary, status);
+    QMutableListIterator<Section> j(sections);
+    while (j.hasNext()) {
+        if (j.next().members.size() == 0)
+            j.remove();
+    }
+    if (sections.isEmpty())
+        return QString();
+
+    QString title = "Obsolete Members for " + qcn->name();
+    QString fileName = fileBase(qcn) + "-obsolete." + fileExtension();
+
+    if (status == CodeMarker::Obsolete) {
+        QString link;
+        if (useOutputSubdirs() && !Generator::outputSubdir().isEmpty())
+            link = QString("../" + Generator::outputSubdir() + QLatin1Char('/'));
+        link += fileName;
+        qcn->setObsoleteLink(link);
+    }
+
+    beginSubPage(qcn, fileName);
+    generateHeader(title, qcn, marker);
+    generateTitle(title, Text(), SmallSubTitle, qcn, marker);
+
+    out() << "<p><b>The following members of QML type "
+          << "<a href=\"" << linkForNode(qcn, 0) << "\">"
+          << protectEnc(qcn->name()) << "</a>"
+          << " are obsolete.</b> "
+          << "They are provided to keep old source code working. "
+          << "We strongly advise against using them in new code.</p>\n";
+
+    QList<Section>::const_iterator s = sections.constBegin();
+    while (s != sections.constEnd()) {
+        QString ref = registerRef((*s).name.toLower());
+        out() << "<a name=\"" << ref
+              << "\"></a>" << divNavTop << '\n';
+        out() << "<h2 id=\"" << ref << "\">" << protectEnc((*s).name) << "</h2>\n";
+        generateQmlSummary(*s, qcn, marker);
+        ++s;
+    }
+
+    sections = marker->qmlSections(qcn, CodeMarker::Detailed, status);
+    QMutableListIterator<Section> k(sections);
+    while (k.hasNext()) {
+        if (k.next().members.size() == 0)
+            k.remove();
+    }
+    if (sections.isEmpty())
+        return QString();
+
+    s = sections.constBegin();
+    while (s != sections.constEnd()) {
+        out() << "<h2>" << protectEnc((*s).name) << "</h2>\n";
+        NodeList::ConstIterator m = (*s).members.constBegin();
+        while (m != (*s).members.constEnd()) {
+            generateDetailedQmlMember(*m, qcn, marker);
+            out() << "<br/>\n";
+            ++m;
+        }
+        ++s;
+    }
+
+    generateFooter();
+    endSubPage();
+    return fileName;
+}
+
 void HtmlGenerator::generateClassHierarchy(const Node *relative, NodeMap& classMap)
 {
     if (classMap.isEmpty())
@@ -2448,8 +2575,8 @@ void HtmlGenerator::generateClassHierarchy(const Node *relative, NodeMap& classM
 
             NodeMap newTop;
             foreach (const RelatedClass &d, child->derivedClasses()) {
-                if (d.access != Node::Private && !d.node->doc().isEmpty())
-                    newTop.insert(d.node->name(), d.node);
+                if (d.node_ && !d.isPrivate() && !d.node_->isInternal() && d.node_->hasDoc())
+                    newTop.insert(d.node_->name(), d.node_);
             }
             if (!newTop.isEmpty()) {
                 stack.push(newTop);
@@ -2469,33 +2596,29 @@ void HtmlGenerator::generateAnnotatedList(const Node* relative,
 {
     if (nodeMap.isEmpty())
         return;
-    NodeList nl;
-    NodeMap::const_iterator i = nodeMap.begin();
-    while (i != nodeMap.end()) {
-        nl.append(i.value());
-        ++i;
-    }
-    generateAnnotatedList(relative, marker, nl);
+    generateAnnotatedList(relative, marker, nodeMap.values());
 }
 
+/*!
+ */
 void HtmlGenerator::generateAnnotatedList(const Node *relative,
                                           CodeMarker *marker,
-                                          const NodeList& nodes)
+                                          const NodeList& unsortedNodes)
 {
+    NodeMap nm;
     bool allInternal = true;
-    foreach (const Node* node, nodes) {
-        if (!node->isInternal() && node->status() != Node::Obsolete) {
+    foreach (Node* node, unsortedNodes) {
+        if (!node->isInternal() && !node->isObsolete()) {
             allInternal = false;
+            nm.insert(node->fullName(relative), node);
         }
     }
     if (allInternal)
         return;
     out() << "<table class=\"annotated\">\n";
     int row = 0;
+    NodeList nodes = nm.values();
     foreach (const Node* node, nodes) {
-        if (node->isInternal() || node->status() == Node::Obsolete)
-            continue;
-
         if (++row % 2 == 1)
             out() << "<tr class=\"odd topAlign\">";
         else
@@ -2504,7 +2627,7 @@ void HtmlGenerator::generateAnnotatedList(const Node *relative,
         generateFullName(node, relative);
         out() << "</p></td>";
 
-        if (!(node->type() == Node::Document)) {
+        if (!node->isDocNode()) {
             Text brief = node->doc().trimmedBriefText(node->name());
             if (!brief.isEmpty()) {
                 out() << "<td class=\"tblDescr\"><p>";
@@ -2585,7 +2708,7 @@ void HtmlGenerator::generateCompactList(ListType listType,
 
         paragraphName[paragraphNr] = key[0].toUpper();
         usedParagraphNames.insert(key[0].toLower().cell());
-        paragraph[paragraphNr].insert(key, c.value());
+        paragraph[paragraphNr].insert(c.key(), c.value());
         ++c;
     }
 
@@ -2680,7 +2803,7 @@ void HtmlGenerator::generateCompactList(ListType listType,
             }
 
             QStringList pieces;
-            if (it.value()->subType() == Node::QmlClass)
+            if (it.value()->isQmlType())
                 pieces << it.value()->name();
             else
                 pieces = it.value()->fullName(relative).split("::");
@@ -2786,117 +2909,105 @@ void HtmlGenerator::generateQmlItem(const Node *node,
         marked.remove("<@type>");
         marked.remove("</@type>");
     }
-    out() << highlightedCode(marked, relative, false, node);
+    out() << highlightedCode(marked, relative, false);
 }
 
-void HtmlGenerator::generateOverviewList(const Node *relative)
+void HtmlGenerator::generateList(const Node* relative, CodeMarker* marker, const QString& selector)
 {
-    QMap<const DocNode *, QMap<QString, DocNode *> > docNodeMap;
-    QMap<QString, const DocNode *> groupTitlesMap;
-    QMap<QString, DocNode *> uncategorizedNodeMap;
+    NodeList nl;
+    CollectionList cl;
     QRegExp singleDigit("\\b([0-9])\\b");
 
-    const NodeList children = qdb_->treeRoot()->childNodes();
-    foreach (Node *child, children) {
-        if (child->type() == Node::Document && child != relative) {
-            DocNode *docNode = static_cast<DocNode *>(child);
-
-            // Check whether the page is part of a group or is the group
-            // definition page.
-            QString group;
-            bool isGroupPage = false;
-            if (docNode->doc().metaCommandsUsed().contains("group")) {
-                group = docNode->doc().metaCommandArgs("group")[0].first;
-                isGroupPage = true;
-            }
-
-            // there are too many examples; they would clutter the list
-            if (docNode->subType() == Node::Example)
-                continue;
-
-            // not interested either in individual (Qt Designer etc.) manual chapters
-            if (docNode->links().contains(Node::ContentsLink))
-                continue;
-
-            // Discard external nodes.
-            if (docNode->subType() == Node::ExternalPage)
-                continue;
-
-            QString sortKey = docNode->fullTitle().toLower();
-            if (sortKey.startsWith("the "))
-                sortKey.remove(0, 4);
-            sortKey.replace(singleDigit, "0\\1");
-
-            if (!group.isEmpty()) {
-                if (isGroupPage) {
-                    // If we encounter a group definition page, we add all
-                    // the pages in that group to the list for that group.
-                    foreach (Node *member, docNode->members()) {
-                        if (member->isInternal() || member->type() != Node::Document)
-                            continue;
-                        DocNode *page = static_cast<DocNode *>(member);
-                        if (page) {
-                            QString sortKey = page->fullTitle().toLower();
-                            if (sortKey.startsWith("the "))
-                                sortKey.remove(0, 4);
-                            sortKey.replace(singleDigit, "0\\1");
-                            docNodeMap[const_cast<const DocNode *>(docNode)].insert(sortKey, page);
-                            groupTitlesMap[docNode->fullTitle()] = const_cast<const DocNode *>(docNode);
-                        }
-                    }
-                }
-                else if (!isGroupPage) {
-                    // If we encounter a page that belongs to a group then
-                    // we add that page to the list for that group.
-                    const DocNode* gn = qdb_->getGroup(group);
-                    if (gn && !docNode->isInternal())
-                        docNodeMap[gn].insert(sortKey, docNode);
-                }
-            }
+    if (selector == "overviews") {
+        CNMap groups;
+        qdb_->mergeCollections(Node::Group, groups, relative);
+        cl = groups.values();
+        foreach (CollectionNode* cn, cl)
+            nl.append(cn);
+        generateAnnotatedList(relative, marker, nl);
+    }
+    else if (selector == "cpp-modules") {
+        CNMap modules;
+        qdb_->mergeCollections(Node::Module, modules, relative);
+        cl = modules.values();
+        foreach (CollectionNode* cn, cl)
+            nl.append(cn);
+        generateAnnotatedList(relative, marker, nl);
+    }
+    else if (selector == "qml-modules") {
+        CNMap qmlModules;
+        qdb_->mergeCollections(Node::QmlModule, qmlModules, relative);
+        cl = qmlModules.values();
+        foreach (CollectionNode* cn, cl)
+            nl.append(cn);
+        generateAnnotatedList(relative, marker, nl);
+    }
+    else {
+        /*
+          \generatelist {selector} is only allowed in a
+          comment where the topic is \group, \module, or
+          \qmlmodule.
+        */
+        if (!relative || !relative->isCollectionNode()) {
+            relative->doc().location().warning(tr("\\generatelist {%1} is only allowed in \\group, \\module, and \\qmlmodule comments.").arg(selector));
+            return;
+        }
+        if (selector == "related") {
+            Node* n = const_cast<Node*>(relative);
+            CollectionNode* cn = static_cast<CollectionNode*>(n);
+            qdb_->mergeCollections(cn);
+            generateAnnotatedList(cn, marker, cn->members());
+        }
+        else {
+            Node* n = const_cast<Node*>(relative);
+            CollectionNode* cn = static_cast<CollectionNode*>(n);
+            qdb_->mergeCollections(cn);
+            generateAnnotatedList(cn, marker, cn->members());
         }
     }
 
-    // We now list all the pages found that belong to groups.
-    // If only certain pages were found for a group, but the definition page
-    // for that group wasn't listed, the list of pages will be intentionally
-    // incomplete. However, if the group definition page was listed, all the
-    // pages in that group are listed for completeness.
-
-    if (!docNodeMap.isEmpty()) {
-        foreach (const QString &groupTitle, groupTitlesMap.keys()) {
-            const DocNode *groupNode = groupTitlesMap[groupTitle];
+#if 0
+    QStringList keys = groups.uniqueKeys();
+    foreach (QString key, keys) {
+        GroupNode* gn = static_cast<GroupNode*>(groups.value(key));
+        if (gn) {
             out() << QString("<h3><a href=\"%1\">%2</a></h3>\n").arg(
-                         linkForNode(groupNode, relative)).arg(
-                         protectEnc(groupNode->fullTitle()));
-
-            if (docNodeMap[groupNode].count() == 0)
+                         linkForNode(gn, relative)).arg(
+                         protectEnc(gn->fullTitle()));
+#if 0
+            if (gn->members().isEmpty())
                 continue;
 
-            out() << "<ul>\n";
+            NodeMap nm;
+            foreach (Node* member, gn->members()) {
+                if (member->isInternal() || member->isExample() || member->isExternalPage() ||
+                    member->isObsolete())
+                    continue;
+                // not interested either in individual (Qt Designer etc.) manual chapters
+                if (member->links().contains(Node::ContentsLink))
+                    continue;
+                QString sortKey = member->fullTitle().toLower();
+                if (sortKey.startsWith("the "))
+                    sortKey.remove(0, 4);
+                sortKey.replace(singleDigit, "0\\1");
+                nm.insert(sortKey, member);
+            }
 
-            foreach (const DocNode *docNode, docNodeMap[groupNode]) {
-                QString title = docNode->fullTitle();
+            out() << "<ul>\n";
+            QStringList titles = nm.keys();
+            foreach (QString t, titles) {
+                Node* member = nm.value(t);
+                QString title = member->fullTitle();
                 if (title.startsWith("The "))
                     title.remove(0, 4);
-                out() << "<li><a href=\"" << linkForNode(docNode, relative) << "\">"
+                out() << "<li><a href=\"" << linkForNode(member, relative) << "\">"
                       << protectEnc(title) << "</a></li>\n";
             }
             out() << "</ul>\n";
+#endif
         }
     }
-
-    if (!uncategorizedNodeMap.isEmpty()) {
-        out() << QString("<h3>Miscellaneous</h3>\n");
-        out() << "<ul>\n";
-        foreach (const DocNode *docNode, uncategorizedNodeMap) {
-            QString title = docNode->fullTitle();
-            if (title.startsWith("The "))
-                title.remove(0, 4);
-            out() << "<li><a href=\"" << linkForNode(docNode, relative) << "\">"
-                  << protectEnc(title) << "</a></li>\n";
-        }
-        out() << "</ul>\n";
-    }
+#endif
 }
 
 void HtmlGenerator::generateSection(const NodeList& nl,
@@ -3099,8 +3210,7 @@ void HtmlGenerator::generateSynopsis(const Node *node,
 
 QString HtmlGenerator::highlightedCode(const QString& markedCode,
                                        const Node* relative,
-                                       bool alignNames,
-                                       const Node* self)
+                                       bool alignNames)
 {
     QString src = markedCode;
     QString html;
@@ -3148,8 +3258,7 @@ QString HtmlGenerator::highlightedCode(const QString& markedCode,
         if (src.at(i) == charLangle && src.at(i + 1) == charAt) {
             i += 2;
             if (parseArg(src, funcTag, &i, srcSize, &arg, &par1)) {
-
-                const Node* n = qdb_->resolveTarget(par1.toString(), relative);
+                const Node* n = qdb_->findFunctionNode(par1.toString(), relative, Node::DontCare);
                 QString link = linkForNode(n, relative);
                 addLink(link, arg, &html);
                 par1 = QStringRef();
@@ -3164,7 +3273,7 @@ QString HtmlGenerator::highlightedCode(const QString& markedCode,
         }
     }
 
-    // replace all "(<@(type|headerfile|func)(?: +[^>]*)?>)(.*)(</@\\2>)" tags
+    // replace all "(<@(type|headerfile)(?: +[^>]*)?>)(.*)(</@\\2>)" tags
     src = html;
     html = QString();
 
@@ -3174,13 +3283,13 @@ QString HtmlGenerator::highlightedCode(const QString& markedCode,
             bool handled = false;
             if (parseArg(src, typeTag, &i, srcSize, &arg, &par1)) {
                 par1 = QStringRef();
-                const Node* n = qdb_->resolveTarget(arg.toString(), relative, self);
+                const Node* n = qdb_->findTypeNode(arg.toString(), relative);
                 html += QLatin1String("<span class=\"type\">");
-                if (n && n->subType() == Node::QmlBasicType) {
-                    if (relative && relative->subType() == Node::QmlClass)
+                if (n && n->isQmlBasicType()) {
+                    if (relative && relative->isQmlType())
                         addLink(linkForNode(n,relative), arg, &html);
                     else
-                        html += arg.toString();
+                        html += arg;
                 }
                 else
                     addLink(linkForNode(n,relative), arg, &html);
@@ -3189,17 +3298,17 @@ QString HtmlGenerator::highlightedCode(const QString& markedCode,
             }
             else if (parseArg(src, headerTag, &i, srcSize, &arg, &par1)) {
                 par1 = QStringRef();
-                const Node* n = qdb_->resolveTarget(arg.toString(), relative);
-                addLink(linkForNode(n,relative), arg, &html);
-                handled = true;
-            }
-            else if (parseArg(src, funcTag, &i, srcSize, &arg, &par1)) {
-                par1 = QStringRef();
-                const Node* n = qdb_->resolveTarget(arg.toString(), relative);
-                addLink(linkForNode(n,relative), arg, &html);
+                if (arg.at(0) == QChar('&'))
+                    html += arg;
+                else {
+                    const Node* n = qdb_->findNodeForInclude(QStringList(arg.toString()));
+                    if (n && n != relative)
+                        addLink(linkForNode(n,relative), arg, &html);
+                    else
+                        html += arg;
+                }
                 handled = true;
             }
-
             if (!handled) {
                 html += charLangle;
                 html += charAt;
@@ -3491,8 +3600,13 @@ QString HtmlGenerator::refForNode(const Node *node)
         break;
     case Node::Document:
         break;
-    case Node::QmlPropertyGroup:
     case Node::QmlProperty:
+        if (node->isAttached())
+            ref = node->name() + "-attached-prop";
+        else
+            ref = node->name() + "-prop";
+        break;
+    case Node::QmlPropertyGroup:
     case Node::Property:
         ref = node->name() + "-prop";
         break;
@@ -3515,7 +3629,100 @@ QString HtmlGenerator::refForNode(const Node *node)
     return registerRef(ref);
 }
 
-#define DEBUG_ABSTRACT 0
+/*!
+  This function is called for links, i.e. for words that
+  are marked with the qdoc link command. For autolinks
+  that are not marked with the qdoc link command, the
+  getAutoLink() function is called
+
+  It returns the string for a link found by using the data
+  in the \a atom to search the database. It also sets \a node
+  to point to the target node for that link. \a relative points
+  to the node holding the qdoc comment where the link command
+  was found.
+ */
+QString HtmlGenerator::getLink(const Atom *atom, const Node *relative, const Node** node)
+{
+    const QString& t = atom->string();
+    if (t.at(0) == QChar('h')) {
+        if (t.startsWith("http:") || t.startsWith("https:"))
+            return t;
+    }
+    else if (t.at(0) == QChar('f')) {
+        if (t.startsWith("file:") || t.startsWith("ftp:"))
+            return t;
+    }
+    else if (t.at(0) == QChar('m')) {
+        if (t.startsWith("mailto:"))
+            return t;
+    }
+
+    QString ref;
+
+    *node = qdb_->findNodeForAtom(atom, relative, ref);
+    if (!(*node))
+        return QString();
+
+    QString url = (*node)->url();
+    if (!url.isEmpty()) {
+        if (ref.isEmpty())
+            return url;
+        int hashtag = url.lastIndexOf(QChar('#'));
+        if (hashtag != -1)
+            url.truncate(hashtag);
+        return url + "#" + ref;
+    }
+    /*
+      Given that *node is not null, we now cconstruct a link
+      to the page that *node represents, and then if we found
+      a target on that page, we connect the target to the link
+      with '#'.
+    */
+    QString link = linkForNode(*node, relative);
+    if (*node && (*node)->subType() == Node::Image)
+        link = "images/used-in-examples/" + link;
+    if (!ref.isEmpty())
+        link += QLatin1Char('#') + ref;
+    return link;
+}
+
+/*!
+  This function is called for autolinks, i.e. for words that
+  are not marked with the qdoc link command that qdoc has
+  reason to believe should be links. For links marked with
+  the qdoc link command, the getLink() function is called.
+
+  It returns the string for a link found by using the data
+  in the \a atom to search the database. It also sets \a node
+  to point to the target node for that link. \a relative points
+  to the node holding the qdoc comment where the link command
+  was found.
+ */
+QString HtmlGenerator::getAutoLink(const Atom *atom, const Node *relative, const Node** node)
+{
+    QString ref;
+    QString link;
+
+    *node = qdb_->findNodeForAtom(atom, relative, ref);
+    if (!(*node))
+        return QString();
+
+    QString url = (*node)->url();
+    if (!url.isEmpty()) {
+        if (ref.isEmpty())
+            return url;
+        int hashtag = url.lastIndexOf(QChar('#'));
+        if (hashtag != -1)
+            url.truncate(hashtag);
+        return url + "#" + ref;
+    }
+
+    link = linkForNode(*node, relative);
+    if (!ref.isEmpty())
+        link += QLatin1Char('#') + ref;
+    return link;
+}
+
 
 /*!
   Construct the link string for the \a node and return it.
@@ -3526,7 +3733,7 @@ QString HtmlGenerator::refForNode(const Node *node)
   */
 QString HtmlGenerator::linkForNode(const Node *node, const Node *relative)
 {
-    if (node == 0 || node == relative)
+    if (node == 0)
         return QString();
     if (!node->url().isEmpty())
         return node->url();
@@ -3537,7 +3744,7 @@ QString HtmlGenerator::linkForNode(const Node *node, const Node *relative)
 
     QString fn = fileName(node);
     if (node && relative && node->parent() != relative) {
-        if (node->parent()->subType() == Node::QmlClass && relative->subType() == Node::QmlClass) {
+        if (node->parent()->isQmlType() && relative->isQmlType()) {
             if (node->parent()->isAbstract()) {
                 /*
                   This is a bit of a hack. What we discover with
@@ -3609,13 +3816,14 @@ void HtmlGenerator::generateDetailedMember(const Node *node,
     generateMacRef(node, marker);
 #endif
     generateExtractionMark(node, MemberMark);
+    QString nodeRef = refForNode(node);
     if (node->type() == Node::Enum
             && (enume = static_cast<const EnumNode *>(node))->flagsType()) {
 #ifdef GENERATE_MAC_REFS
         generateMacRef(enume->flagsType(), marker);
 #endif
-        out() << "<h3 class=\"flags\">";
-        out() << "<a name=\"" + refForNode(node) + "\"></a>";
+        out() << "<h3 class=\"flags\" id=\"" << nodeRef << "\">";
+        out() << "<a name=\"" + nodeRef + "\"></a>";
         generateSynopsis(enume, relative, marker, CodeMarker::Detailed);
         out() << "<br/>";
         generateSynopsis(enume->flagsType(),
@@ -3625,8 +3833,8 @@ void HtmlGenerator::generateDetailedMember(const Node *node,
         out() << "</h3>\n";
     }
     else {
-        out() << "<h3 class=\"fn\">";
-        out() << "<a name=\"" + refForNode(node) + "\"></a>";
+        out() << "<h3 class=\"fn\" id=\"" << nodeRef << "\">";
+        out() << "<a name=\"" + nodeRef + "\"></a>";
         generateSynopsis(node, relative, marker, CodeMarker::Detailed);
         out() << "</h3>" << divNavTop << '\n';
     }
@@ -3680,6 +3888,8 @@ int HtmlGenerator::hOffset(const Node *node)
     case Node::Namespace:
     case Node::Class:
         return 2;
+    case Node::QmlBasicType:
+    case Node::QmlType:
     case Node::Document:
         return 1;
     case Node::Enum:
@@ -3715,131 +3925,6 @@ const QPair<QString,QString> HtmlGenerator::anchorForNode(const Node *node)
     return anchorPair;
 }
 
-QString HtmlGenerator::getLink(const Atom *atom, const Node *relative, const Node** node)
-{
-    QString link;
-    *node = 0;
-    inObsoleteLink = false;
-
-    if (atom->string().contains(QLatin1Char(':')) &&
-            (atom->string().startsWith("file:")
-             || atom->string().startsWith("http:")
-             || atom->string().startsWith("https:")
-             || atom->string().startsWith("ftp:")
-             || atom->string().startsWith("mailto:"))) {
-
-        link = atom->string();
-    }
-    else {
-        QStringList path;
-        if (atom->string().contains('#')) {
-            path = atom->string().split('#');
-        }
-        else {
-            path.append(atom->string());
-        }
-
-        QString ref;
-        QString first = path.first().trimmed();
-        if (first.isEmpty()) {
-            *node = relative;
-        }
-        else if (first.endsWith(".html")) {
-            /*
-              This is not a recursive search. That's ok in
-              this case, because we are searching for a page
-              node, which must be a direct child of the tree
-              root.
-            */
-            *node = qdb_->treeRoot()->findChildNodeByNameAndType(first, Node::Document);
-        }
-        else {
-            *node = qdb_->resolveTarget(first, relative);
-            if (!*node) {
-                *node = qdb_->findDocNodeByTitle(first, relative);
-            }
-            if (!*node) {
-                *node = qdb_->findUnambiguousTarget(first, ref, relative);
-                if (*node && !(*node)->url().isEmpty() && !ref.isEmpty()) {
-                    QString final = (*node)->url() + "#" + ref;
-                    return final;
-                }
-            }
-        }
-        if (*node) {
-            if (!(*node)->url().isEmpty()) {
-                return (*node)->url();
-            }
-            else {
-                path.removeFirst();
-            }
-        }
-        else {
-            *node = relative;
-        }
-
-        if (*node) {
-            if ((*node)->status() == Node::Obsolete) {
-                if (relative) {
-                    if (relative->parent() != *node) {
-                        if (relative->status() != Node::Obsolete) {
-                            bool porting = false;
-                            if (relative->type() == Node::Document) {
-                                const DocNode* dn = static_cast<const DocNode*>(relative);
-                                if (dn->title().startsWith("Porting"))
-                                    porting = true;
-                            }
-                            QString name = relative->plainFullName();
-                            if (!porting && !name.startsWith("Q3")) {
-                                if (obsoleteLinks) {
-                                    relative->doc().location().warning(tr("Link to obsolete item '%1' in %2")
-                                                                       .arg(atom->string())
-                                                                       .arg(name));
-                                }
-                                inObsoleteLink = true;
-                            }
-                        }
-                    }
-                }
-                else {
-                    qDebug() << "Link to Obsolete entity"
-                             << (*node)->name() << "no relative";
-                }
-            }
-        }
-
-        /*
-          This loop really only makes sense if *node is not 0.
-          In that case, The node *node points to represents a
-          qdoc page, so the link will ultimately point to some
-          target on that page. This loop finds that target on
-          the page that *node represents. ref is that target.
-         */
-        while (!path.isEmpty()) {
-            ref = qdb_->findTarget(path.first(), *node);
-            if (ref.isEmpty())
-                break;
-            path.removeFirst();
-        }
-
-        /*
-          Given that *node is not null, we now cconstruct a link
-          to the page that *node represents, and then if there is
-          a target on that page, we connect the target to the link
-          with '#'.
-         */
-        if (path.isEmpty()) {
-            link = linkForNode(*node, relative);
-            if (*node && (*node)->subType() == Node::Image)
-                link = "images/used-in-examples/" + link;
-            if (!ref.isEmpty()) {
-                link += QLatin1Char('#') + ref;
-            }
-        }
-    }
-    return link;
-}
-
 void HtmlGenerator::generateStatus(const Node *node, CodeMarker *marker)
 {
     Text text;
@@ -3850,38 +3935,7 @@ void HtmlGenerator::generateStatus(const Node *node, CodeMarker *marker)
             Generator::generateStatus(node, marker);
         break;
     case Node::Compat:
-        if (node->isInnerNode()) {
-            text << Atom::ParaLeft
-                 << Atom(Atom::FormattingLeft,ATOM_FORMATTING_BOLD)
-                 << "This "
-                 << typeString(node)
-                 << " is part of the Qt 3 support library."
-                 << Atom(Atom::FormattingRight, ATOM_FORMATTING_BOLD)
-                 << " It is provided to keep old source code working. "
-                 << "We strongly advise against "
-                 << "using it in new code. See ";
-
-            const DocNode *docNode = qdb_->findDocNodeByTitle("Porting To Qt 4");
-            QString ref;
-            if (docNode && node->type() == Node::Class) {
-                QString oldName(node->name());
-                oldName.remove(QLatin1Char('3'));
-                ref = qdb_->findTarget(oldName, docNode);
-            }
-
-            if (!ref.isEmpty()) {
-                text << Atom(Atom::Link, linkForNode(docNode, node) + QLatin1Char('#') + ref);
-            }
-            else
-                text << Atom(Atom::Link, "Porting to Qt 4");
-
-            text << Atom(Atom::FormattingLeft, ATOM_FORMATTING_LINK)
-                 << Atom(Atom::String, "Porting to Qt 4")
-                 << Atom(Atom::FormattingRight, ATOM_FORMATTING_LINK)
-                 << " for more information."
-                 << Atom::ParaRight;
-        }
-        generateText(text, node, marker);
+        // Porting to Qt 4 no longer supported
         break;
     default:
         Generator::generateStatus(node, marker);
@@ -3999,6 +4053,7 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
 #endif
     generateExtractionMark(node, MemberMark);
     out() << "<div class=\"qmlitem\">";
+    QString nodeRef = refForNode(node);
     if (node->type() == Node::QmlPropertyGroup) {
         const QmlPropertyGroupNode* qpgn = static_cast<const QmlPropertyGroupNode*>(node);
         NodeList::ConstIterator p = qpgn->childNodes().constBegin();
@@ -4006,19 +4061,20 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
         out() << "<table class=\"qmlname\">";
 
         QString heading = qpgn->name() + " group";
-        out() << "<tr valign=\"top\" class=\"even\">";
+        out() << "<tr valign=\"top\" class=\"even\" id=\"" << nodeRef << "\">";
         out() << "<th class=\"centerAlign\"><p>";
-        out() << "<a name=\"" + refForNode(qpgn) + "\"></a>";
+        out() << "<a name=\"" + nodeRef + "\"></a>";
         out() << "<b>" << heading << "</b>";
         out() << "</p></th></tr>";
         while (p != qpgn->childNodes().constEnd()) {
             if ((*p)->type() == Node::QmlProperty) {
                 qpn = static_cast<QmlPropertyNode*>(*p);
-                out() << "<tr valign=\"top\" class=\"odd\">";
+                nodeRef = refForNode(qpn);
+                out() << "<tr valign=\"top\" class=\"odd\" id=\"" << nodeRef << "\">";
                 out() << "<td class=\"tblQmlPropNode\"><p>";
-                out() << "<a name=\"" + refForNode(qpn) + "\"></a>";
+                out() << "<a name=\"" + nodeRef + "\"></a>";
 
-                if (!qpn->isWritable(qdb_))
+                if (!qpn->isWritable())
                     out() << "<span class=\"qmlreadonly\">read-only</span>";
                 if (qpn->isDefault())
                     out() << "<span class=\"qmldefault\">default</span>";
@@ -4034,12 +4090,12 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
         qpn = static_cast<QmlPropertyNode*>(node);
         out() << "<div class=\"qmlproto\">";
         out() << "<table class=\"qmlname\">";
-        out() << "<tr valign=\"top\" class=\"odd\">";
+        out() << "<tr valign=\"top\" class=\"odd\" id=\"" << nodeRef << "\">";
         out() << "<td class=\"tblQmlPropNode\"><p>";
         out() << "<a name=\"" + refForNode(qpn) + "\"></a>";
         if (!qpn->isReadOnlySet()) {
             if (qpn->declarativeCppNode())
-                qpn->setReadOnly(!qpn->isWritable(qdb_));
+                qpn->setReadOnly(!qpn->isWritable());
         }
         if (qpn->isReadOnly())
             out() << "<span class=\"qmlreadonly\">read-only</span>";
@@ -4054,7 +4110,7 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
         const FunctionNode* qsn = static_cast<const FunctionNode*>(node);
         out() << "<div class=\"qmlproto\">";
         out() << "<table class=\"qmlname\">";
-        out() << "<tr valign=\"top\" class=\"odd\">";
+        out() << "<tr valign=\"top\" class=\"odd\" id=\"" << nodeRef << "\">";
         out() << "<td class=\"tblQmlFuncNode\"><p>";
         out() << "<a name=\"" + refForNode(qsn) + "\"></a>";
         generateSynopsis(qsn,relative,marker,CodeMarker::Detailed,false);
@@ -4066,7 +4122,7 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
         const FunctionNode* qshn = static_cast<const FunctionNode*>(node);
         out() << "<div class=\"qmlproto\">";
         out() << "<table class=\"qmlname\">";
-        out() << "<tr valign=\"top\" class=\"odd\">";
+        out() << "<tr valign=\"top\" class=\"odd\" id=\"" << nodeRef << "\">";
         out() << "<td class=\"tblQmlFuncNode\"><p>";
         out() << "<a name=\"" + refForNode(qshn) + "\"></a>";
         generateSynopsis(qshn,relative,marker,CodeMarker::Detailed,false);
@@ -4078,7 +4134,7 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
         const FunctionNode* qmn = static_cast<const FunctionNode*>(node);
         out() << "<div class=\"qmlproto\">";
         out() << "<table class=\"qmlname\">";
-        out() << "<tr valign=\"top\" class=\"odd\">";
+        out() << "<tr valign=\"top\" class=\"odd\" id=\"" << nodeRef << "\">";
         out() << "<td class=\"tblQmlFuncNode\"><p>";
         out() << "<a name=\"" + refForNode(qmn) + "\"></a>";
         generateSynopsis(qmn,relative,marker,CodeMarker::Detailed,false);
@@ -4101,11 +4157,11 @@ void HtmlGenerator::generateDetailedQmlMember(Node *node,
   Output the "Inherits" line for the QML element,
   if there should be one.
  */
-void HtmlGenerator::generateQmlInherits(const QmlClassNode* qcn, CodeMarker* marker)
+void HtmlGenerator::generateQmlInherits(QmlClassNode* qcn, CodeMarker* marker)
 {
     if (!qcn)
         return;
-    const QmlClassNode* base = qcn->qmlBaseNode();
+    QmlClassNode* base = qcn->qmlBaseNode();
     while (base && base->isInternal()) {
         base = base->qmlBaseNode();
     }
@@ -4229,7 +4285,7 @@ void HtmlGenerator::generateManifestFiles()
 {
     generateManifestFile("examples", "example");
     generateManifestFile("demos", "demo");
-    ExampleNode::exampleNodeMap.clear();
+    qdb_->exampleNodeMap().clear();
     manifestMetaContent.clear();
 }
 
@@ -4240,7 +4296,8 @@ void HtmlGenerator::generateManifestFiles()
  */
 void HtmlGenerator::generateManifestFile(QString manifest, QString element)
 {
-    if (ExampleNode::exampleNodeMap.isEmpty())
+    ExampleNodeMap& exampleNodeMap = qdb_->exampleNodeMap();
+    if (exampleNodeMap.isEmpty())
         return;
     QString fileName = manifest +"-manifest.xml";
     QFile file(outputDir() + QLatin1Char('/') + fileName);
@@ -4251,8 +4308,8 @@ void HtmlGenerator::generateManifestFile(QString manifest, QString element)
         demos = true;
 
     bool proceed = false;
-    ExampleNodeMap::Iterator i = ExampleNode::exampleNodeMap.begin();
-    while (i != ExampleNode::exampleNodeMap.end()) {
+    ExampleNodeMap::Iterator i = exampleNodeMap.begin();
+    while (i != exampleNodeMap.end()) {
         const ExampleNode* en = i.value();
         if (demos) {
             if (en->name().startsWith("demos")) {
@@ -4276,8 +4333,8 @@ void HtmlGenerator::generateManifestFile(QString manifest, QString element)
     writer.writeAttribute("module", project);
     writer.writeStartElement(manifest);
 
-    i = ExampleNode::exampleNodeMap.begin();
-    while (i != ExampleNode::exampleNodeMap.end()) {
+    i = exampleNodeMap.begin();
+    while (i != exampleNodeMap.end()) {
         const ExampleNode* en = i.value();
         if (demos) {
             if (!en->name().startsWith("demos")) {
@@ -4508,6 +4565,16 @@ void HtmlGenerator::reportOrphans(const InnerNode* parent)
             break;
         case Node::Class:
             break;
+        case Node::QmlType:
+            break;
+        case Node::QmlBasicType:
+            break;
+        case Node::Group:
+            break;
+        case Node::Module:
+            break;
+        case Node::QmlModule:
+            break;
         case Node::Document:
             switch (child->subType()) {
             case Node::Example:
@@ -4518,22 +4585,10 @@ void HtmlGenerator::reportOrphans(const InnerNode* parent)
                 break;
             case Node::Image:
                 break;
-            case Node::Group:
-                break;
-            case Node::Module:
-                break;
             case Node::Page:
                 break;
             case Node::ExternalPage:
                 break;
-            case Node::QmlClass:
-                break;
-            case Node::QmlBasicType:
-                break;
-            case Node::QmlModule:
-                break;
-            case Node::Collision:
-                break;
             default:
                 break;
             }
diff --git a/src/tools/qdoc/htmlgenerator.h b/src/tools/qdoc/htmlgenerator.h
index ae16f3c54f..616a989361 100644
--- a/src/tools/qdoc/htmlgenerator.h
+++ b/src/tools/qdoc/htmlgenerator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -88,8 +80,7 @@ public:
     virtual void initializeGenerator(const Config& config);
     virtual void terminateGenerator();
     virtual QString format();
-    virtual void generateTree();
-    void generateCollisionPages();
+    virtual void generateDocs();
     void generateManifestFiles();
 
     QString protectEnc(const QString &string);
@@ -102,7 +93,10 @@ protected:
                              const Node *relative,
                              CodeMarker *marker);
     virtual void generateClassLikeNode(InnerNode* inner, CodeMarker* marker);
+    virtual void generateQmlTypePage(QmlClassNode* qcn, CodeMarker* marker);
+    virtual void generateQmlBasicTypePage(QmlBasicTypeNode* qbtn, CodeMarker* marker);
     virtual void generateDocNode(DocNode* dn, CodeMarker* marker);
+    virtual void generateCollectionNode(CollectionNode* cn, CodeMarker* marker);
     virtual QString fileExtension() const;
     virtual QString refForNode(const Node *node);
     virtual QString linkForNode(const Node *node, const Node *relative);
@@ -152,11 +146,13 @@ private:
                                  QList<Section>* sections = 0);
     QString generateListOfAllMemberFile(const InnerNode *inner,
                                         CodeMarker *marker);
-    QString generateAllQmlMembersFile(const QmlClassNode* qml_cn,
-                                      CodeMarker* marker);
+    QString generateAllQmlMembersFile(QmlClassNode* qml_cn, CodeMarker* marker);
     QString generateLowStatusMemberFile(InnerNode *inner,
                                         CodeMarker *marker,
                                         CodeMarker::Status status);
+    QString generateQmlMemberFile(QmlClassNode* qcn,
+                                  CodeMarker *marker,
+                                  CodeMarker::Status status);
     void generateClassHierarchy(const Node *relative, NodeMap &classMap);
     void generateAnnotatedList(const Node* relative, CodeMarker* marker, const NodeMap& nodeMap);
     void generateAnnotatedList(const Node* relative, CodeMarker* marker, const NodeList& nodes);
@@ -167,7 +163,7 @@ private:
                              QString commonPrefix);
     void generateFunctionIndex(const Node *relative);
     void generateLegaleseList(const Node *relative, CodeMarker *marker);
-    void generateOverviewList(const Node *relative);
+    void generateList(const Node* relative, CodeMarker* marker, const QString& selector);
     void generateSectionList(const Section& section,
                              const Node *relative,
                              CodeMarker *marker,
@@ -182,7 +178,7 @@ private:
     void generateDetailedQmlMember(Node *node,
                                    const InnerNode *relative,
                                    CodeMarker *marker);
-    void generateQmlInherits(const QmlClassNode* qcn, CodeMarker* marker);
+    void generateQmlInherits(QmlClassNode* qcn, CodeMarker* marker);
     void generateQmlInstantiates(QmlClassNode* qcn, CodeMarker* marker);
     void generateInstantiatedBy(ClassNode* cn, CodeMarker* marker);
 
@@ -200,8 +196,7 @@ private:
     void generateSectionInheritedList(const Section& section, const Node *relative);
     QString highlightedCode(const QString& markedCode,
                             const Node* relative,
-                            bool alignNames = false,
-                            const Node* self = 0);
+                            bool alignNames = false);
 
     void generateFullName(const Node *apparentNode, const Node *relative, const Node *actualNode = 0);
     void generateDetailedMember(const Node *node,
@@ -210,12 +205,14 @@ private:
     void generateLink(const Atom *atom, CodeMarker *marker);
     void generateStatus(const Node *node, CodeMarker *marker);
 
+    QString getLink(const Atom *atom, const Node *relative, const Node** node);
+    QString getAutoLink(const Atom *atom, const Node *relative, const Node** node);
+
     QString registerRef(const QString& ref);
     virtual QString fileBase(const Node *node) const;
     QString fileName(const Node *node);
     static int hOffset(const Node *node);
     static bool isThreeColumnEnumValueTable(const Atom *atom);
-    QString getLink(const Atom *atom, const Node *relative, const Node** node);
 #ifdef GENERATE_MAC_REFS
     void generateMacRef(const Node *node, CodeMarker *marker);
 #endif
@@ -263,6 +260,7 @@ private:
     QString qmltypespage;
     QString buildversion;
     QString qflagsHref_;
+    int tocDepth;
 
 public:
     static bool debugging_on;
@@ -276,6 +274,7 @@ public:
 #define HTMLGENERATOR_POSTPOSTHEADER    "postpostheader"
 #define HTMLGENERATOR_NONAVIGATIONBAR   "nonavigationbar"
 #define HTMLGENERATOR_NOSUBDIRS         "nosubdirs"
+#define HTMLGENERATOR_TOCDEPTH          "tocdepth"
 
 
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/jscodemarker.cpp b/src/tools/qdoc/jscodemarker.cpp
index c56dd8eb20..3a29a4db3f 100644
--- a/src/tools/qdoc/jscodemarker.cpp
+++ b/src/tools/qdoc/jscodemarker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/jscodemarker.h b/src/tools/qdoc/jscodemarker.h
index 123e3e2db7..52fe8855af 100644
--- a/src/tools/qdoc/jscodemarker.h
+++ b/src/tools/qdoc/jscodemarker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/location.cpp b/src/tools/qdoc/location.cpp
index cdecb59626..040dd0cd88 100644
--- a/src/tools/qdoc/location.cpp
+++ b/src/tools/qdoc/location.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,7 +44,7 @@
 
 QT_BEGIN_NAMESPACE
 
-QT_STATIC_CONST_IMPL Location Location::null;
+const Location Location::null;
 
 int Location::tabSize;
 QString Location::programName;
diff --git a/src/tools/qdoc/location.h b/src/tools/qdoc/location.h
index 0c113bcbeb..eb4dbbae98 100644
--- a/src/tools/qdoc/location.h
+++ b/src/tools/qdoc/location.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -90,7 +82,7 @@ public:
     void fatal(const QString& message,
                const QString& details = QString()) const;
 
-    QT_STATIC_CONST Location null;
+    static const Location null;
 
     static void initialize(const Config& config);
     static void terminate();
diff --git a/src/tools/qdoc/main.cpp b/src/tools/qdoc/main.cpp
index 8998a27081..118c206f16 100644
--- a/src/tools/qdoc/main.cpp
+++ b/src/tools/qdoc/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -49,6 +41,7 @@
 #include "ditaxmlgenerator.h"
 #include "doc.h"
 #include "htmlgenerator.h"
+#include "location.h"
 #include "plaincodemarker.h"
 #include "puredocparser.h"
 #include "tokenizer.h"
@@ -63,6 +56,8 @@
 #ifndef QT_BOOTSTRAPPED
 #  include "qcoreapplication.h"
 #endif
+#include "qcommandlineoption.h"
+#include "qcommandlineparser.h"
 
 #include <algorithm>
 
@@ -78,6 +73,7 @@ static bool highlighting = false;
 static bool showInternal = false;
 static bool redirectDocumentationToDevNull = false;
 static bool noLinkErrors = false;
+static bool autolinkErrors = false;
 static bool obsoleteLinks = false;
 static QStringList defines;
 static QStringList dependModules;
@@ -85,55 +81,6 @@ static QStringList indexDirs;
 static QString currentDir;
 static QString prevCurrentDir;
 
-/*!
-  Print the help message to \c stdout.
- */
-static void printHelp()
-{
-    Location::information(QCoreApplication::translate("QDoc", "Usage: qdoc [options] file1.qdocconf ...\n"
-                             "Options:\n"
-                             "    -D<name>       "
-                             "Define <name> as a macro while parsing sources\n"
-                             "    -depends       "
-                             "Specify dependent modules\n"
-                             "    -help          "
-                             "Display this information and exit\n"
-                             "    -highlighting  "
-                             "Turn on syntax highlighting (makes qdoc run slower)\n"
-                             "    -indexdir      "
-                             "Specify a directory where QDoc should search for index files to load\n"
-                             "    -installdir    "
-                             "Specify the directory where the output will be after running \"make install\"\n"
-                             "    -no-examples   "
-                             "Do not generate documentation for examples\n"
-                             "    -no-link-errors   "
-                             "Do not print link errors (i.e. missing targets)\n"
-                             "    -obsoletelinks "
-                             "Report links from obsolete items to non-obsolete items\n"
-                             "    -outputdir     "
-                             "Specify output directory, overrides setting in qdocconf file\n"
-                             "    -outputformat  "
-                             "Specify output format, overrides setting in qdocconf file\n"
-                             "    -prepare        "
-                             "Run qdoc only to generate an index file, not the docs\n"
-                             "    -generate        "
-                             "Run qdoc to read the index files and generate the docs\n"
-                             "    -showinternal  "
-                             "Include content marked internal\n"
-                             "    -redirect-documentation-to-dev-null "
-                             "Save all documentation content to /dev/null. Useful if someone is interested in qdoc errors only.\n"
-                             "    -version       "
-                             "Display version of qdoc and exit\n") );
-}
-
-/*!
-  Prints the qdoc version number to stdout.
- */
-static void printVersion()
-{
-    QString s = QCoreApplication::translate("QDoc", "qdoc version %1").arg(QT_VERSION_STR);
-    Location::information(s);
-}
 
 static void loadIndexFiles(Config& config)
 {
@@ -141,9 +88,18 @@ static void loadIndexFiles(Config& config)
     /*
       Read some XML indexes containing definitions from other documentation sets.
      */
-    QStringList indexFiles = config.getStringList(CONFIG_INDEXES);
+    QStringList indexFiles;
+    QStringList configIndexes = config.getStringList(CONFIG_INDEXES);
+    foreach (const QString &index, configIndexes) {
+        QFileInfo fi(index);
+        if (fi.exists() && fi.isFile())
+            indexFiles << index;
+        else
+            Location::null.warning(QString("Index file not found: %1").arg(index));
+    }
 
     dependModules += config.getStringList(CONFIG_DEPENDS);
+    dependModules.removeDuplicates();
 
     bool noOutputSubdirs = false;
     QString singleOutputSubdir;
@@ -202,11 +158,14 @@ static void loadIndexFiles(Config& config)
                         multiple index files for a module, since the last modified file has the
                         highest UNIX timestamp.
                     */
-                    qDebug() << "Multiple indices found for dependency:" << dependModules[i] << "\nFound:";
+                    QStringList indexPaths;
                     for (int k = 0; k < foundIndices.size(); k++)
-                        qDebug() << foundIndices[k].absoluteFilePath();
-                    qDebug() << "Using" << foundIndices[foundIndices.size() - 1].absoluteFilePath()
-                            << "as index for" << dependModules[i];
+                        indexPaths << foundIndices[k].absoluteFilePath();
+                    Location::null.warning(QString("Multiple index files found for dependency \"%1\":\n%2").arg(
+                                               dependModules[i], indexPaths.join('\n')));
+                    Location::null.warning(QString("Using %1 as index file for dependency \"%2\"").arg(
+                                               foundIndices[foundIndices.size() - 1].absoluteFilePath(),
+                                               dependModules[i]));
                     indexToAdd = foundIndices[foundIndices.size() - 1].absoluteFilePath();
                 }
                 else if (foundIndices.size() == 1) {
@@ -216,16 +175,14 @@ static void loadIndexFiles(Config& config)
                     if (!indexFiles.contains(indexToAdd))
                         indexFiles << indexToAdd;
                 }
-                else if (Generator::runGenerateOnly()) {
-                    qDebug() << "warning:" << config.getString(CONFIG_PROJECT)
-                             << "Cannot locate index file for dependency"
-                             << dependModules[i];
+                else {
+                    Location::null.warning(QString("\"%1\" Cannot locate index file for dependency \"%2\"").arg(
+                                               config.getString(CONFIG_PROJECT), dependModules[i]));
                 }
             }
         }
         else {
-            qDebug() << "Dependent modules specified, but no index directories were set."
-                     << "There will probably be errors for missing links.";
+            Location::null.warning(QLatin1String("Dependent modules specified, but no index directories were set. There will probably be errors for missing links."));
         }
     }
     qdb->readIndexes(indexFiles);
@@ -275,6 +232,7 @@ static void processQdocconfFile(const QString &fileName)
     config.setStringList(CONFIG_SHOWINTERNAL, QStringList(showInternal ? "true" : "false"));
     config.setStringList(CONFIG_REDIRECTDOCUMENTATIONTODEVNULL, QStringList(redirectDocumentationToDevNull ? "true" : "false"));
     config.setStringList(CONFIG_NOLINKERRORS, QStringList(noLinkErrors ? "true" : "false"));
+    config.setStringList(CONFIG_AUTOLINKERRORS, QStringList(autolinkErrors ? "true" : "false"));
     config.setStringList(CONFIG_OBSOLETELINKS, QStringList(obsoleteLinks ? "true" : "false"));
 
     /*
@@ -289,7 +247,8 @@ static void processQdocconfFile(const QString &fileName)
     currentDir = QFileInfo(fileName).path();
     Location::initialize(config);
     config.load(fileName);
-
+    QString project = config.getString(CONFIG_PROJECT).toLower();
+    //qDebug() << "\nStart project:" << project;
     /*
       Add the defines to the configuration variables.
      */
@@ -363,7 +322,11 @@ static void processQdocconfFile(const QString &fileName)
     Location outputFormatsLocation = config.lastLocation();
 
     //if (!Generator::runPrepareOnly())
+    Generator::debug("  loading index files");
     loadIndexFiles(config);
+    qdb->newPrimaryTree(config.getString(CONFIG_PROJECT));
+    qdb->setSearchOrder();
+    Generator::debug("  done loading index files");
 
     QSet<QString> excludedDirs;
     QSet<QString> excludedFiles;
@@ -372,7 +335,7 @@ static void processQdocconfFile(const QString &fileName)
     QStringList excludedDirsList;
     QStringList excludedFilesList;
 
-    Generator::debugSegfault("Reading excludedirs");
+    Generator::debug("Reading excludedirs");
     excludedDirsList = config.getCanonicalPathList(CONFIG_EXCLUDEDIRS);
     foreach (const QString &excludeDir, excludedDirsList) {
         QString p = QDir::fromNativeSeparators(excludeDir);
@@ -381,14 +344,14 @@ static void processQdocconfFile(const QString &fileName)
             excludedDirs.insert(p);
     }
 
-    Generator::debugSegfault("Reading excludefiles");
-    excludedFilesList = config.getCleanPathList(CONFIG_EXCLUDEFILES);
+    Generator::debug("Reading excludefiles");
+    excludedFilesList = config.getCanonicalPathList(CONFIG_EXCLUDEFILES);
     foreach (const QString& excludeFile, excludedFilesList) {
         QString p = QDir::fromNativeSeparators(excludeFile);
         excludedFiles.insert(p);
     }
 
-    Generator::debugSegfault("Reading headerdirs");
+    Generator::debug("Reading headerdirs");
     headerList = config.getAllFiles(CONFIG_HEADERS,CONFIG_HEADERDIRS,excludedDirs,excludedFiles);
     QMap<QString,QString> headers;
     QMultiMap<QString,QString> headerFileNames;
@@ -402,7 +365,7 @@ static void processQdocconfFile(const QString &fileName)
         headerFileNames.insert(t,t);
     }
 
-    Generator::debugSegfault("Reading sourcedirs");
+    Generator::debug("Reading sourcedirs");
     sourceList = config.getAllFiles(CONFIG_SOURCES,CONFIG_SOURCEDIRS,excludedDirs,excludedFiles);
     QMap<QString,QString> sources;
     QMultiMap<QString,QString> sourceFileNames;
@@ -419,7 +382,7 @@ static void processQdocconfFile(const QString &fileName)
       Find all the qdoc files in the example dirs, and add
       them to the source files to be parsed.
      */
-    Generator::debugSegfault("Reading exampledirs");
+    Generator::debug("Reading exampledirs");
     QStringList exampleQdocList = config.getExampleQdocFiles(excludedDirs, excludedFiles);
     for (int i=0; i<exampleQdocList.size(); ++i) {
         if (!sources.contains(exampleQdocList[i])) {
@@ -429,7 +392,7 @@ static void processQdocconfFile(const QString &fileName)
         }
     }
 
-    Generator::debugSegfault("Adding doc/image dirs found in exampledirs to imagedirs");
+    Generator::debug("Adding doc/image dirs found in exampledirs to imagedirs");
     QSet<QString> exampleImageDirs;
     QStringList exampleImageList = config.getExampleImageFiles(excludedDirs, excludedFiles);
     for (int i=0; i<exampleImageList.size(); ++i) {
@@ -448,13 +411,14 @@ static void processQdocconfFile(const QString &fileName)
      */
     QSet<CodeParser *> usedParsers;
 
-    Generator::debugSegfault("Parsing header files");
+    Generator::debug("Parsing header files");
     int parsed = 0;
     QMap<QString,QString>::ConstIterator h = headers.constBegin();
     while (h != headers.constEnd()) {
         CodeParser *codeParser = CodeParser::parserForHeaderFile(h.key());
         if (codeParser) {
             ++parsed;
+            Generator::debug(QString("Parsing " + h.key()));
             codeParser->parseHeaderFile(config.location(), h.key());
             usedParsers.insert(codeParser);
         }
@@ -465,22 +429,26 @@ static void processQdocconfFile(const QString &fileName)
         codeParser->doneParsingHeaderFiles();
 
     usedParsers.clear();
+    qdb->resolveInheritance();
+
     /*
       Parse each source text file in the set using the appropriate parser and
       add it to the big tree.
      */
     parsed = 0;
-    Generator::debugSegfault("Parsing source files");
+    Generator::debug("Parsing source files");
     QMap<QString,QString>::ConstIterator s = sources.constBegin();
     while (s != sources.constEnd()) {
         CodeParser *codeParser = CodeParser::parserForSourceFile(s.key());
         if (codeParser) {
             ++parsed;
+            Generator::debug(QString("Parsing " + s.key()));
             codeParser->parseSourceFile(config.location(), s.key());
             usedParsers.insert(codeParser);
         }
         ++s;
     }
+    Generator::debug(QString("Parsing done."));
 
     foreach (CodeParser *codeParser, usedParsers)
         codeParser->doneParsingSourceFiles();
@@ -490,7 +458,7 @@ static void processQdocconfFile(const QString &fileName)
       source files. Resolve all the class names, function names,
       targets, URLs, links, and other stuff that needs resolving.
      */
-    Generator::debugSegfault("Resolving stuff prior to generating docs");
+    Generator::debug("Resolving stuff prior to generating docs");
     qdb->resolveIssues();
 
     /*
@@ -499,19 +467,21 @@ static void processQdocconfFile(const QString &fileName)
       documentation output. More than one output format can be
       requested. The tree is traversed for each one.
      */
-    Generator::debugSegfault("Generating docs");
+    Generator::debug("Generating docs");
     QSet<QString>::ConstIterator of = outputFormats.constBegin();
     while (of != outputFormats.constEnd()) {
         Generator* generator = Generator::generatorForFormat(*of);
         if (generator == 0)
             outputFormatsLocation.fatal(QCoreApplication::translate("QDoc", "Unknown output format '%1'").arg(*of));
-        generator->generateTree();
+        generator->generateDocs();
         ++of;
     }
 
 
     //Generator::writeOutFileNames();
-    Generator::debugSegfault("Shutting down qdoc");
+    Generator::debug("Shutting down qdoc");
+    if (Generator::debugging())
+        Generator::stopDebugging(project);
 
     QDocDatabase::qdocDB()->setVersion(QString());
     Generator::terminate();
@@ -532,7 +502,7 @@ static void processQdocconfFile(const QString &fileName)
 #ifdef DEBUG_SHUTDOWN_CRASH
     qDebug() << "main(): qdoc database deleted";
 #endif
-    Generator::debugSegfault("qdoc finished!");
+    Generator::debug("qdoc finished!");
 }
 
 extern Q_CORE_EXPORT QBasicAtomicInt qt_qhash_seed;
@@ -544,8 +514,9 @@ int main(int argc, char **argv)
 
 #ifndef QT_BOOTSTRAPPED
     qt_qhash_seed.testAndSetRelaxed(-1, 0); // set the hash seed to 0 if it wasn't set yet
-    QCoreApplication app(argc, argv);
 #endif
+    QCoreApplication app(argc, argv);
+    app.setApplicationVersion(QStringLiteral(QT_VERSION_STR));
 
     /*
       Create code parsers for the languages to be parsed,
@@ -567,93 +538,124 @@ int main(int argc, char **argv)
     HtmlGenerator htmlGenerator;
     DitaXmlGenerator ditaxmlGenerator;
 
-    QStringList qdocFiles;
-    QString opt;
-    int i = 1;
-
-    while (i < argc) {
-        opt = argv[i++];
-
-        if (opt == "-help") {
-            printHelp();
-            return EXIT_SUCCESS;
-        }
-        else if (opt == "-version") {
-            printVersion();
-            return EXIT_SUCCESS;
-        }
-        else if (opt == "--") {
-            while (i < argc)
-                qdocFiles.append(argv[i++]);
-        }
-        else if (opt.startsWith("-D")) {
-            QString define = opt.mid(2);
-            defines += define;
-        }
-        else if (opt == "-depends") {
-            dependModules += argv[i];
-            i++;
-        }
-        else if (opt == "-highlighting") {
-            highlighting = true;
-        }
-        else if (opt == "-showinternal") {
-            showInternal = true;
-        }
-        else if (opt == "-redirect-documentation-to-dev-null") {
-            redirectDocumentationToDevNull = true;
-        }
-        else if (opt == "-no-examples") {
-            Config::generateExamples = false;
-        }
-        else if (opt == "-indexdir") {
-            if (QFile::exists(argv[i])) {
-                indexDirs += argv[i];
-            }
-            else {
-                qDebug() << "Cannot find index directory" << argv[i];
-            }
-            i++;
-        }
-        else if (opt == "-installdir") {
-            Config::installDir = argv[i];
-            i++;
-        }
-        else if (opt == "-obsoletelinks") {
-            obsoleteLinks = true;
-        }
-        else if (opt == "-outputdir") {
-            Config::overrideOutputDir = argv[i];
-            i++;
-        }
-        else if (opt == "-outputformat") {
-            Config::overrideOutputFormats.insert(argv[i]);
-            i++;
-        }
-        else if (opt == "-no-link-errors") {
-            noLinkErrors = true;
-        }
-        else if (opt == "-debug") {
-            Generator::setDebugSegfaultFlag(true);
-        }
-        else if (opt == "-prepare") {
-            Generator::setQDocPass(Generator::Prepare);
-        }
-        else if (opt == "-generate") {
-            Generator::setQDocPass(Generator::Generate);
-        }
-        else if (opt == "-log-progress") {
-            Location::startLoggingProgress();
-        }
-        else {
-            qdocFiles.append(opt);
-        }
-    }
-
-    if (qdocFiles.isEmpty()) {
-        printHelp();
-        return EXIT_FAILURE;
+    QCommandLineParser parser;
+    parser.setApplicationDescription(QCoreApplication::translate("qdoc", "Qt documentation generator"));
+    parser.addHelpOption();
+    parser.addVersionOption();
+
+    parser.setSingleDashWordOptionMode(QCommandLineParser::ParseAsLongOptions);
+
+    parser.addPositionalArgument("file1.qdocconf ...", QCoreApplication::translate("qdoc", "Input files"));
+
+    QCommandLineOption defineOption(QStringList() << QStringLiteral("D"));
+    defineOption.setDescription(QCoreApplication::translate("qdoc", "Define the argument as a macro while parsing sources"));
+    defineOption.setValueName(QStringLiteral("macro[=def]"));
+    parser.addOption(defineOption);
+
+    QCommandLineOption dependsOption(QStringList() << QStringLiteral("depends"));
+    dependsOption.setDescription(QCoreApplication::translate("qdoc", "Specify dependent modules"));
+    dependsOption.setValueName(QStringLiteral("module"));
+    parser.addOption(dependsOption);
+
+    QCommandLineOption highlightingOption(QStringList() << QStringLiteral("highlighting"));
+    highlightingOption.setDescription(QCoreApplication::translate("qdoc", "Turn on syntax highlighting (makes qdoc run slower)"));
+    parser.addOption(highlightingOption);
+
+    QCommandLineOption showInternalOption(QStringList() << QStringLiteral("showinternal"));
+    showInternalOption.setDescription(QCoreApplication::translate("qdoc", "Include content marked internal"));
+    parser.addOption(showInternalOption);
+
+    QCommandLineOption redirectDocumentationToDevNullOption(QStringList() << QStringLiteral("redirect-documentation-to-dev-null"));
+    redirectDocumentationToDevNullOption.setDescription(QCoreApplication::translate("qdoc", "Save all documentation content to /dev/null. Useful if someone is interested in qdoc errors only."));
+    parser.addOption(redirectDocumentationToDevNullOption);
+
+    QCommandLineOption noExamplesOption(QStringList() << QStringLiteral("no-examples"));
+    noExamplesOption.setDescription(QCoreApplication::translate("qdoc", "Do not generate documentation for examples"));
+    parser.addOption(noExamplesOption);
+
+    QCommandLineOption indexDirOption(QStringList() << QStringLiteral("indexdir"));
+    indexDirOption.setDescription(QCoreApplication::translate("qdoc", "Specify a directory where QDoc should search for index files to load"));
+    indexDirOption.setValueName(QStringLiteral("dir"));
+    parser.addOption(indexDirOption);
+
+    QCommandLineOption installDirOption(QStringList() << QStringLiteral("installdir"));
+    installDirOption.setDescription(QCoreApplication::translate("qdoc", "Specify the directory where the output will be after running \"make install\""));
+    installDirOption.setValueName(QStringLiteral("dir"));
+    parser.addOption(installDirOption);
+
+    QCommandLineOption obsoleteLinksOption(QStringList() << QStringLiteral("obsoletelinks"));
+    obsoleteLinksOption.setDescription(QCoreApplication::translate("qdoc", "Report links from obsolete items to non-obsolete items"));
+    parser.addOption(obsoleteLinksOption);
+
+    QCommandLineOption outputDirOption(QStringList() << QStringLiteral("outputdir"));
+    outputDirOption.setDescription(QCoreApplication::translate("qdoc", "Specify output directory, overrides setting in qdocconf file"));
+    outputDirOption.setValueName(QStringLiteral("dir"));
+    parser.addOption(outputDirOption);
+
+    QCommandLineOption outputFormatOption(QStringList() << QStringLiteral("outputformat"));
+    outputFormatOption.setDescription(QCoreApplication::translate("qdoc", "Specify output format, overrides setting in qdocconf file"));
+    outputFormatOption.setValueName(QStringLiteral("format"));
+    parser.addOption(outputFormatOption);
+
+    QCommandLineOption noLinkErrorsOption(QStringList() << QStringLiteral("no-link-errors"));
+    noLinkErrorsOption.setDescription(QCoreApplication::translate("qdoc", "Do not print link errors (i.e. missing targets)"));
+    parser.addOption(noLinkErrorsOption);
+
+    QCommandLineOption autoLinkErrorsOption(QStringList() << QStringLiteral("autolink-errors"));
+    autoLinkErrorsOption.setDescription(QCoreApplication::translate("qdoc", "Show errors when automatic linking fails"));
+    parser.addOption(autoLinkErrorsOption);
+
+    QCommandLineOption debugOption(QStringList() << QStringLiteral("debug"));
+    debugOption.setDescription(QCoreApplication::translate("qdoc", "Enable debug output"));
+    parser.addOption(debugOption);
+
+    QCommandLineOption prepareOption(QStringList() << QStringLiteral("prepare"));
+    prepareOption.setDescription(QCoreApplication::translate("qdoc", "Run qdoc only to generate an index file, not the docs"));
+    parser.addOption(prepareOption);
+
+    QCommandLineOption generateOption(QStringList() << QStringLiteral("generate"));
+    generateOption.setDescription(QCoreApplication::translate("qdoc", "Run qdoc to read the index files and generate the docs"));
+    parser.addOption(generateOption);
+
+    QCommandLineOption logProgressOption(QStringList() << QStringLiteral("log-progress"));
+    logProgressOption.setDescription(QCoreApplication::translate("qdoc", "Log progress on stderr."));
+    parser.addOption(logProgressOption);
+
+    parser.process(app);
+
+    defines += parser.values(defineOption);
+    dependModules += parser.values(dependsOption);
+    highlighting = parser.isSet(highlightingOption);
+    showInternal = parser.isSet(showInternalOption);
+    redirectDocumentationToDevNull = parser.isSet(redirectDocumentationToDevNullOption);
+    Config::generateExamples = !parser.isSet(noExamplesOption);
+    foreach (const QString &indexDir, parser.values(indexDirOption)) {
+        if (QFile::exists(indexDir))
+            indexDirs += indexDir;
+        else
+            qDebug() << "Cannot find index directory" << indexDir;
     }
+    if (parser.isSet(installDirOption))
+        Config::installDir = parser.value(installDirOption);
+    obsoleteLinks = parser.isSet(obsoleteLinksOption);
+    if (parser.isSet(outputDirOption))
+        Config::overrideOutputDir = parser.value(outputDirOption);
+    foreach (const QString &format, parser.values(outputFormatOption))
+        Config::overrideOutputFormats.insert(format);
+    noLinkErrors = parser.isSet(noLinkErrorsOption);
+    autolinkErrors = parser.isSet(autoLinkErrorsOption);
+    if (parser.isSet(debugOption))
+        Generator::startDebugging(QString("command line"));
+    if (parser.isSet(prepareOption))
+        Generator::setQDocPass(Generator::Prepare);
+    if (parser.isSet(generateOption))
+        Generator::setQDocPass(Generator::Generate);
+    if (parser.isSet(logProgressOption))
+        Location::startLoggingProgress();
+
+    const QStringList qdocFiles = parser.positionalArguments();
+    if (qdocFiles.isEmpty())
+        parser.showHelp();
 
     /*
       Main loop.
diff --git a/src/tools/qdoc/node.cpp b/src/tools/qdoc/node.cpp
index c88ebfc760..ce655efef6 100644
--- a/src/tools/qdoc/node.cpp
+++ b/src/tools/qdoc/node.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,12 +38,44 @@
 #include <quuid.h>
 #include "qdocdatabase.h"
 #include <qdebug.h>
+#include "generator.h"
 
 QT_BEGIN_NAMESPACE
 
 int Node::propertyGroupCount_ = 0;
-ExampleNodeMap ExampleNode::exampleNodeMap;
 QStringMap Node::operators_;
+QMap<QString,Node::Type> Node::goals_;
+
+/*!
+  Initialize the map of search goals. This is called once
+  by QDocDatabase::initializeDB(). The map key is a string
+  representing a value in the enum Node::Type. The map value
+  is the enum value.
+
+  There should be an entry in the map for each value in the
+  Type enum.
+ */
+void Node::initialize()
+{
+    goals_.insert("class", Node::Class);
+    goals_.insert("qmltype", Node::QmlType);
+    goals_.insert("page", Node::Document);
+    goals_.insert("function", Node::Function);
+    goals_.insert("property", Node::Property);
+    goals_.insert("variable", Node::Variable);
+    goals_.insert("group", Node::Group);
+    goals_.insert("module", Node::Module);
+    goals_.insert("qmlmodule", Node::QmlModule);
+    goals_.insert("qmppropertygroup", Node::QmlPropertyGroup);
+    goals_.insert("qmlproperty", Node::QmlProperty);
+    goals_.insert("qmlsignal", Node::QmlSignal);
+    goals_.insert("qmlsignalhandler", Node::QmlSignalHandler);
+    goals_.insert("qmlmethod", Node::QmlMethod);
+    goals_.insert("qmlbasictype", Node::QmlBasicType);
+    goals_.insert("enum", Node::Enum);
+    goals_.insert("typedef", Node::Typedef);
+    goals_.insert("namespace", Node::Namespace);
+}
 
 /*!
   Increment the number of property groups seen in the current
@@ -112,8 +136,7 @@ QString Node::plainFullName(const Node* relative) const
     const Node* node = this;
     while (node) {
         fullName.prepend(node->plainName());
-        if (node->parent() == relative || node->parent()->subType() == Node::Collision ||
-            node->parent()->name().isEmpty())
+        if (node->parent() == relative || node->parent()->name().isEmpty())
             break;
         fullName.prepend(QLatin1String("::"));
         node = node->parent();
@@ -122,19 +145,13 @@ QString Node::plainFullName(const Node* relative) const
 }
 
 /*!
-  Constructs and returns this node's full name. The \a relative
-  node is either null or is a collision node.
+  Constructs and returns this node's full name.
  */
 QString Node::fullName(const Node* relative) const
 {
-    if (type() == Node::Document) {
-        const DocNode* dn = static_cast<const DocNode*>(this);
-        // Only print modulename::type on collision pages.
-        if (!dn->qmlModuleName().isEmpty() && relative != 0 && relative->isCollisionNode())
-            return dn->qmlModuleName() + "::" + dn->title();
-        return dn->title();
-    }
-    else if (type() == Node::Class) {
+    if (isDocNode())
+        return title();
+    else if (isClass()) {
         const ClassNode* cn = static_cast<const ClassNode*>(this);
         if (!cn->serviceName().isEmpty())
             return cn->serviceName();
@@ -143,6 +160,31 @@ QString Node::fullName(const Node* relative) const
 }
 
 /*!
+  Try to match this node's type and subtype with one of the
+  pairs in \a types. If a match is found, return true. If no
+  match is found, return false.
+
+  \a types is a list of type/subtype pairs, where the first
+  value in the pair is a Node::Type, and the second value is
+  a Node::SubType. The second value is used in the match if
+  this node's type is Node::Document.
+ */
+bool Node::match(const NodeTypeList& types) const
+{
+    for (int i=0; i<types.size(); ++i) {
+        if (type() == types.at(i).first) {
+            if (type() == Node::Document) {
+                if (subType() == types.at(i).second)
+                    return true;
+            }
+            else
+                return true;
+        }
+    }
+    return false;
+}
+
+/*!
   Sets this Node's Doc to \a doc. If \a replace is false and
   this Node already has a Doc, a warning is reported that the
   Doc is being overridden, and it reports where the previous
@@ -170,7 +212,6 @@ Node::Node(Type type, InnerNode *parent, const QString& name)
       pageType_(NoPageType),
       status_(Commendable),
       indexNodeFlag_(false),
-      seen_(true),
       parent_(parent),
       relatesTo_(0),
       name_(name)
@@ -224,21 +265,13 @@ Node::Node(Type type, InnerNode *parent, const QString& name)
     }
 }
 
-/*!
+/*! \fn QString Node::url() const
   Returns the node's URL.
  */
-QString Node::url() const
-{
-    return url_;
-}
 
-/*!
+/*! \fn void Node::setUrl(const QString &url)
   Sets the node's URL to \a url
  */
-void Node::setUrl(const QString &url)
-{
-    url_ = url;
-}
 
 /*!
   Returns this node's page type as a string, for use as an
@@ -309,6 +342,16 @@ QString Node::nodeTypeString(unsigned t)
         return "property";
     case Variable:
         return "variable";
+    case Group:
+        return "group";
+    case Module:
+        return "module";
+    case QmlType:
+        return "QML type";
+    case QmlBasicType:
+        return "QML basic type";
+    case QmlModule:
+        return "QML module";
     case QmlProperty:
         return "QML property";
     case QmlPropertyGroup:
@@ -351,24 +394,12 @@ QString Node::nodeSubtypeString(unsigned t)
         return "file";
     case Image:
         return "image";
-    case Group:
-        return "group";
-    case Module:
-        return "module";
     case Page:
         return "page";
     case ExternalPage:
         return "external page";
-    case QmlClass:
-        return "QML type";
-    case QmlBasicType:
-        return "QML basic type";
-    case QmlModule:
-        return "QML module";
     case DitaMap:
         return "ditamap";
-    case Collision:
-        return "collision";
     case NoSubType:
     default:
         break;
@@ -389,8 +420,8 @@ void Node::setPageType(const QString& t)
         pageType_ = OverviewPage;
     else if (t == "tutorial")
         pageType_ = TutorialPage;
-    else if (t == "howto")
-        pageType_ = HowToPage;
+    else if (t == "faq")
+        pageType_ = FAQPage;
     else if (t == "article")
         pageType_ = ArticlePage;
     else if (t == "example")
@@ -515,7 +546,7 @@ QString Node::extractClassName(const QString &string) const
  */
 QString RelatedClass::accessString() const
 {
-    switch (access) {
+    switch (access_) {
     case Node::Protected:
         return "protected";
     case Node::Private:
@@ -601,9 +632,9 @@ QmlClassNode* Node::qmlClassNode()
 {
     if (isQmlNode()) {
         Node* n = this;
-        while (n && n->subType() != Node::QmlClass)
+        while (n && !n->isQmlType())
             n = n->parent();
-        if (n && n->subType() == Node::QmlClass)
+        if (n && n->isQmlType())
             return static_cast<QmlClassNode*>(n);
     }
     return 0;
@@ -640,139 +671,186 @@ bool Node::isInternal() const
 }
 
 /*!
-  \class InnerNode
+  Returns a pointer to the Tree this node is in.
  */
+Tree* Node::tree() const
+{
+    return (parent() ? parent()->tree() : 0);
+}
 
 /*!
-  The inner node destructor deletes the children and removes
-  this node from its related nodes.
+  Returns a pointer to the root of the Tree this node is in.
  */
-InnerNode::~InnerNode()
+const Node* Node::root() const
 {
-    deleteChildren();
-    removeFromRelated();
+    return (parent() ? parent()->root() : this);
 }
 
 /*!
-  Returns \c true if this node's members coolection is not empty.
+  \class InnerNode
  */
-bool InnerNode::hasMembers() const
-{
-    return !members_.isEmpty();
-}
 
 /*!
-  Appends \a node to the members list, if and only if it
-  isn't already in the members list.
+  The inner node destructor deletes the children and removes
+  this node from its related nodes.
  */
-void InnerNode::addMember(Node* node)
+InnerNode::~InnerNode()
 {
-    if (!members_.contains(node))
-        members_.append(node);
+    deleteChildren();
+    removeFromRelated();
 }
 
 /*!
-  Returns \c true if this node's members collection contains at
-  least one namespace node.
+  If \a genus is \c{Node::DontCare}, find the first node in
+  this node's child list that has the given \a name. If this
+  node is a QML type, be sure to also look in the children
+  of its property group nodes. Return the matching node or 0.
+
+  If \a genus is either \c{Node::CPP} or \c {Node::QML}, then
+  find all this node's children that have the given \a name,
+  and return the one that satisfies the \a genus requirement.
  */
-bool InnerNode::hasNamespaces() const
+Node *InnerNode::findChildNode(const QString& name, Node::Genus genus) const
 {
-    if (!members_.isEmpty()) {
-        NodeList::const_iterator i = members_.begin();
-        while (i != members_.end()) {
-            if ((*i)->isNamespace())
-                return true;
-            ++i;
+    if (genus == Node::DontCare) {
+        Node *node = childMap.value(name);
+        if (node && !node->isQmlPropertyGroup()) // mws asks: Why not property group?
+            return node;
+        if (isQmlType()) {
+            for (int i=0; i<children_.size(); ++i) {
+                Node* n = children_.at(i);
+                if (n->isQmlPropertyGroup()) {
+                    node = static_cast<InnerNode*>(n)->findChildNode(name, genus);
+                    if (node)
+                        return node;
+                }
+            }
         }
     }
-    return false;
+    else {
+        NodeList nodes = childMap.values(name);
+        if (!nodes.isEmpty()) {
+            for (int i=0; i<nodes.size(); ++i) {
+                Node* node = nodes.at(i);
+                if (genus == node->genus() || genus == Node::DontCare)
+                    return node;
+            }
+        }
+    }
+    return primaryFunctionMap.value(name);
 }
 
 /*!
-  Returns \c true if this node's members collection contains at
-  least one class node.
+  Find all the child nodes of this node that are named
+  \a name and return them in \a nodes.
  */
-bool InnerNode::hasClasses() const
+void InnerNode::findChildren(const QString& name, NodeList& nodes) const
 {
-    if (!members_.isEmpty()) {
-        NodeList::const_iterator i = members_.begin();
-        while (i != members_.end()) {
-            if ((*i)->isClass())
-                return true;
-            ++i;
+    nodes = childMap.values(name);
+    Node* n = primaryFunctionMap.value(name);
+    if (n) {
+        nodes.append(n);
+        NodeList t = secondaryFunctionMap.value(name);
+        if (!t.isEmpty())
+            nodes.append(t);
+    }
+    if (!nodes.isEmpty() || !isQmlNode())
+        return;
+    int i = name.indexOf(QChar('.'));
+    if (i < 0)
+        return;
+    QString qmlPropGroup = name.left(i);
+    NodeList t = childMap.values(qmlPropGroup);
+    if (t.isEmpty())
+        return;
+    foreach (Node* n, t) {
+        if (n->isQmlPropertyGroup()) {
+            n->findChildren(name, nodes);
+            if (!nodes.isEmpty())
+                break;
         }
     }
-    return false;
 }
 
+#if 0
 /*!
-  Loads \a out with all this node's member nodes that are namespace nodes.
+  Find the node in this node's children that has the given \a name. If
+  this node is a QML class node, be sure to also look in the children
+  of its property group nodes. Return the matching node or 0. This is
+  not a recearsive search.
+
+  If \a qml is true, only match a node for which node->isQmlNode()
+  returns \c true. If \a qml is false, only match a node for which
+  node->isQmlNode() returns \c false.
  */
-void InnerNode::getMemberNamespaces(NodeMap& out)
+Node* InnerNode::findChildNode(const QString& name, bool qml) const
 {
-    out.clear();
-    NodeList::const_iterator i = members_.begin();
-    while (i != members_.end()) {
-        if ((*i)->isNamespace())
-            out.insert((*i)->name(),(*i));
-        ++i;
+    NodeList nodes = childMap.values(name);
+    if (!nodes.isEmpty()) {
+        for (int i=0; i<nodes.size(); ++i) {
+            Node* node = nodes.at(i);
+            if (!qml) {
+                if (!node->isQmlNode())
+                    return node;
+            }
+            else if (node->isQmlNode())
+                return node;
+        }
+    }
+    if (qml && isQmlType()) {
+        for (int i=0; i<children_.size(); ++i) {
+            Node* node = children_.at(i);
+            if (node->isQmlPropertyGroup()) {
+                node = static_cast<InnerNode*>(node)->findChildNode(name);
+                if (node)
+                    return node;
+            }
+        }
     }
+    return primaryFunctionMap.value(name);
 }
+#endif
 
 /*!
-  Loads \a out with all this node's member nodes that are class nodes.
+  This function is like findChildNode(), but if a node
+  with the specified \a name is found but it is not of the
+  specified \a type, 0 is returned.
  */
-void InnerNode::getMemberClasses(NodeMap& out)
+Node* InnerNode::findChildNode(const QString& name, Type type)
 {
-    out.clear();
-    NodeList::const_iterator i = members_.begin();
-    while (i != members_.end()) {
-        if ((*i)->isClass())
-            out.insert((*i)->name(),(*i));
-        ++i;
+    if (type == Function)
+        return primaryFunctionMap.value(name);
+    else {
+        NodeList nodes = childMap.values(name);
+        for (int i=0; i<nodes.size(); ++i) {
+            Node* node = nodes.at(i);
+            if (node->type() == type)
+                return node;
+        }
     }
+    return 0;
 }
 
+#if 0
 /*!
-  Find the node in this node's children that has the
-  given \a name. If this node is a QML class node, be
-  sure to also look in the children of its property
-  group nodes. Return the matching node or 0.
  */
-Node *InnerNode::findChildNodeByName(const QString& name)
-{
-    Node *node = childMap.value(name);
-    if (node && node->type() != QmlPropertyGroup)
-        return node;
-    if ((type() == Document) && (subType() == QmlClass)) {
-        for (int i=0; i<children_.size(); ++i) {
-            Node* n = children_.at(i);
-            if (n->type() == QmlPropertyGroup) {
-                node = static_cast<InnerNode*>(n)->findChildNodeByName(name);
-                if (node)
-                    return node;
-            }
-        }
-    }
-    return primaryFunctionMap.value(name);
-}
-void InnerNode::findNodes(const QString& name, QList<Node*>& n)
+void InnerNode::findNodes(const QString& name, NodeList& n)
 {
     n.clear();
     Node* node = 0;
-    QList<Node*> nodes = childMap.values(name);
+    NodeList nodes = childMap.values(name);
     /*
       <sigh> If this node's child map contains no nodes named
-      name, then if this node is a QML class, seach each of its
+      name, then if this node is a QML class, search each of its
       property group nodes for a node named name. If a match is
       found, append it to the output list and return immediately.
      */
     if (nodes.isEmpty()) {
-        if ((type() == Document) && (subType() == QmlClass)) {
+        if (isQmlType()) {
             for (int i=0; i<children_.size(); ++i) {
                 node = children_.at(i);
-                if (node->type() == QmlPropertyGroup) {
-                    node = static_cast<InnerNode*>(node)->findChildNodeByName(name);
+                if (node->isQmlPropertyGroup()) {
+                    node = static_cast<InnerNode*>(node)->findChildNode(name);
                     if (node) {
                         n.append(node);
                         return;
@@ -793,10 +871,10 @@ void InnerNode::findNodes(const QString& name, QList<Node*>& n)
          */
         for (int i=0; i<nodes.size(); ++i) {
             node = nodes.at(i);
-            if (node->type() != QmlPropertyGroup)
+            if (!node->isQmlPropertyGroup())
                 n.append(node);
             else {
-                node = static_cast<InnerNode*>(node)->findChildNodeByName(name);
+                node = static_cast<InnerNode*>(node)->findChildNode(name);
                 if (node)
                     n.append(node);
             }
@@ -808,75 +886,13 @@ void InnerNode::findNodes(const QString& name, QList<Node*>& n)
     if (node)
         n.append(node);
 }
-
-/*!
-  Find the node in this node's children that has the given \a name. If
-  this node is a QML class node, be sure to also look in the children
-  of its property group nodes. Return the matching node or 0. This is
-  not a recearsive search.
-
-  If \a qml is true, only match a node for which node->isQmlNode()
-  returns \c true. If \a qml is false, only match a node for which
-  node->isQmlNode() returns \c false.
- */
-Node* InnerNode::findChildNodeByName(const QString& name, bool qml)
-{
-    QList<Node*> nodes = childMap.values(name);
-    if (!nodes.isEmpty()) {
-        for (int i=0; i<nodes.size(); ++i) {
-            Node* node = nodes.at(i);
-            if (!qml) {
-                if (!node->isQmlNode())
-                    return node;
-            }
-            else if (node->isQmlNode() && (node->type() != QmlPropertyGroup))
-                return node;
-        }
-    }
-    if (qml && (type() == Document) && (subType() == QmlClass)) {
-        for (int i=0; i<children_.size(); ++i) {
-            Node* node = children_.at(i);
-            if (node->type() == QmlPropertyGroup) {
-                node = static_cast<InnerNode*>(node)->findChildNodeByName(name);
-                if (node)
-                    return node;
-            }
-        }
-    }
-    return primaryFunctionMap.value(name);
-}
-
-/*!
-  This function is like findChildNodeByName(), but if a node
-  with the specified \a name is found but it is not of the
-  specified \a type, 0 is returned.
-
-  This function is not recursive and therefore can't handle
-  collisions. If it finds a collision node named \a name, it
-  will return that node. But it might not find the collision
-  node because it looks up \a name in the child map, not the
-  list.
- */
-Node* InnerNode::findChildNodeByNameAndType(const QString& name, Type type)
-{
-    if (type == Function)
-        return primaryFunctionMap.value(name);
-    else {
-        QList<Node*> nodes = childMap.values(name);
-        for (int i=0; i<nodes.size(); ++i) {
-            Node* node = nodes.at(i);
-            if (node->type() == type)
-                return node;
-        }
-    }
-    return 0;
-}
+#endif
 
 /*!
   Find a function node that is a child of this nose, such
   that the function node has the specified \a name.
  */
-FunctionNode *InnerNode::findFunctionNode(const QString& name)
+FunctionNode *InnerNode::findFunctionNode(const QString& name) const
 {
     return static_cast<FunctionNode *>(primaryFunctionMap.value(name));
 }
@@ -968,31 +984,13 @@ void InnerNode::setOverload(const FunctionNode *func, bool overlode)
   Mark all child nodes that have no documentation as having
   private access and internal status. qdoc will then ignore
   them for documentation purposes.
-
-  \note Exception: Name collision nodes are not marked
-  private/internal.
  */
 void InnerNode::makeUndocumentedChildrenInternal()
 {
     foreach (Node *child, childNodes()) {
         if (child->doc().isEmpty()) {
-            if (child->subType() != Node::Collision) {
-                child->setAccess(Node::Private);
-                child->setStatus(Node::Internal);
-            }
-        }
-    }
-}
-
-/*!
-  In each child node that is a collision node,
-  clear the current child pointer.
- */
-void InnerNode::clearCurrentChildPointers()
-{
-    foreach (Node* child, childNodes()) {
-        if (child->subType() == Collision) {
-            child->clearCurrentChild();
+            child->setAccess(Node::Private);
+            child->setStatus(Node::Internal);
         }
     }
 }
@@ -1092,64 +1090,17 @@ bool Node::isWrapper() const
 }
 
 /*!
- */
-const Node *InnerNode::findChildNodeByName(const QString& name) const
-{
-    InnerNode *that = (InnerNode *) this;
-    return that->findChildNodeByName(name);
-}
-
-/*!
-  If \a qml is true, only match a node for which node->isQmlNode()
-  returns \c true. If \a qml is false, only match a node for which
-  node->isQmlNode() returns \c false.
- */
-const Node* InnerNode::findChildNodeByName(const QString& name, bool qml) const
-{
-    InnerNode*that = (InnerNode*) this;
-    return that->findChildNodeByName(name, qml);
-}
-
-/*!
-  Searches this node's children for a child named \a name
-  with the specified node \a type.
- */
-const Node* InnerNode::findChildNodeByNameAndType(const QString& name, Type type) const
-{
-    InnerNode *that = (InnerNode *) this;
-    return that->findChildNodeByNameAndType(name, type);
-}
-
-/*!
-  Find a function node that is a child of this nose, such
-  that the function node has the specified \a name. This
-  function calls the non-const version of itself.
- */
-const FunctionNode *InnerNode::findFunctionNode(const QString& name) const
-{
-    InnerNode *that = (InnerNode *) this;
-    return that->findFunctionNode(name);
-}
-
-/*!
-  Find the function node that is a child of this node, such
-  that the function has the same name and signature as the
-  \a clone node. This function calls the non-const version.
- */
-const FunctionNode *InnerNode::findFunctionNode(const FunctionNode *clone) const
-{
-    InnerNode *that = (InnerNode *) this;
-    return that->findFunctionNode(clone);
-}
-
-/*!
+  Finds the enum type node that has \a enumValue as one of
+  its enum values and returns a pointer to it. Returns 0 if
+  no enum type node is found that has \a enumValue as one
+  of its values.
  */
 const EnumNode *InnerNode::findEnumNodeForValue(const QString &enumValue) const
 {
     foreach (const Node *node, enumChildren_) {
-        const EnumNode *enume = static_cast<const EnumNode *>(node);
-        if (enume->hasItem(enumValue))
-            return enume;
+        const EnumNode *en = static_cast<const EnumNode *>(node);
+        if (en->hasItem(enumValue))
+            return en;
     }
     return 0;
 }
@@ -1194,6 +1145,7 @@ InnerNode::InnerNode(Type type, InnerNode *parent, const QString& name)
 {
     switch (type) {
     case Class:
+    case QmlType:
     case Namespace:
         setPageType(ApiPage);
         break;
@@ -1278,6 +1230,17 @@ void InnerNode::addChild(Node *child)
 }
 
 /*!
+  Adds the \a child to this node's child map using \a title
+  as the key. The \a child is not added to the child list
+  again, because it is presumed to already be there. We just
+  want to be able to find the child by its \a title.
+ */
+void InnerNode::addChild(Node* child, const QString& title)
+{
+    childMap.insertMulti(title, child);
+}
+
+/*!
  */
 void InnerNode::removeChild(Node *child)
 {
@@ -1307,6 +1270,16 @@ void InnerNode::removeChild(Node *child)
         }
         ++ent;
     }
+    if (child->title().isEmpty())
+        return;
+    ent = childMap.find(child->title());
+    while (ent != childMap.end() && ent.key() == child->title()) {
+        if (*ent == child) {
+            childMap.erase(ent);
+            break;
+        }
+        ++ent;
+    }
 }
 
 /*!
@@ -1381,7 +1354,7 @@ QmlPropertyNode* InnerNode::hasQmlProperty(const QString& n) const
             if (child->name() == n)
                 return static_cast<QmlPropertyNode*>(child);
         }
-        else if (child->type() == Node::QmlPropertyGroup) {
+        else if (child->isQmlPropertyGroup()) {
             QmlPropertyNode* t = child->hasQmlProperty(n);
             if (t)
                 return t;
@@ -1391,6 +1364,27 @@ QmlPropertyNode* InnerNode::hasQmlProperty(const QString& n) const
 }
 
 /*!
+  If this node has a child that is a QML property named \a n
+  whose type (attached or normal property) matches \a attached,
+  return the pointer to that child.
+ */
+QmlPropertyNode* InnerNode::hasQmlProperty(const QString& n, bool attached) const
+{
+    foreach (Node* child, childNodes()) {
+        if (child->type() == Node::QmlProperty) {
+            if (child->name() == n && child->isAttached() == attached)
+                return static_cast<QmlPropertyNode*>(child);
+        }
+        else if (child->isQmlPropertyGroup()) {
+            QmlPropertyNode* t = child->hasQmlProperty(n, attached);
+            if (t)
+                return t;
+        }
+    }
+    return 0;
+}
+
+/*!
   \class LeafNode
  */
 
@@ -1414,6 +1408,7 @@ LeafNode::LeafNode(Type type, InnerNode *parent, const QString& name)
     case QmlSignal:
     case QmlSignalHandler:
     case QmlMethod:
+    case QmlBasicType:
         setPageType(ApiPage);
         break;
     default:
@@ -1457,7 +1452,7 @@ LeafNode::LeafNode(InnerNode* parent, Type type, const QString& name)
   Constructs a namespace node.
  */
 NamespaceNode::NamespaceNode(InnerNode *parent, const QString& name)
-    : InnerNode(Namespace, parent, name)
+    : InnerNode(Namespace, parent, name), tree_(0)
 {
     setPageType(ApiPage);
 }
@@ -1480,13 +1475,36 @@ ClassNode::ClassNode(InnerNode *parent, const QString& name)
 }
 
 /*!
+  Adds the base class \a node to this class's list of base
+  classes. The base class has the specified \a access. This
+  is a resolved base class.
+ */
+void ClassNode::addResolvedBaseClass(Access access, ClassNode* node)
+{
+    bases_.append(RelatedClass(access, node));
+    node->derived_.append(RelatedClass(access, this));
+}
+
+/*!
+  Adds the derived class \a node to this class's list of derived
+  classes. The derived class inherits this class with \a access.
+ */
+void ClassNode::addDerivedClass(Access access, ClassNode* node)
+{
+    derived_.append(RelatedClass(access, node));
+}
+
+/*!
+  Add an unresolved base class to this class node's list of
+  base classes. The unresolved base class will be resolved
+  before the generate phase of qdoc. In an unresolved base
+  class, the pointer to the base class node is 0.
  */
-void ClassNode::addBaseClass(Access access,
-                             ClassNode *node,
-                             const QString &dataTypeWithTemplateArgs)
+void ClassNode::addUnresolvedBaseClass(Access access,
+                                       const QStringList& path,
+                                       const QString& signature)
 {
-    bases.append(RelatedClass(access, node, dataTypeWithTemplateArgs));
-    node->derived.append(RelatedClass(access, this));
+    bases_.append(RelatedClass(access, path, signature));
 }
 
 /*!
@@ -1498,15 +1516,15 @@ void ClassNode::fixBaseClasses()
     QSet<ClassNode *> found;
 
     // Remove private and duplicate base classes.
-    while (i < bases.size()) {
-        ClassNode* bc = bases.at(i).node;
-        if (bc->access() == Node::Private || found.contains(bc)) {
-            RelatedClass rc = bases.at(i);
-            bases.removeAt(i);
-            ignoredBases.append(rc);
+    while (i < bases_.size()) {
+        ClassNode* bc = bases_.at(i).node_;
+        if (bc && (bc->access() == Node::Private || found.contains(bc))) {
+            RelatedClass rc = bases_.at(i);
+            bases_.removeAt(i);
+            ignoredBases_.append(rc);
             const QList<RelatedClass> &bb = bc->baseClasses();
             for (int j = bb.size() - 1; j >= 0; --j)
-                bases.insert(i, bb.at(j));
+                bases_.insert(i, bb.at(j));
         }
         else {
             ++i;
@@ -1515,13 +1533,13 @@ void ClassNode::fixBaseClasses()
     }
 
     i = 0;
-    while (i < derived.size()) {
-        ClassNode* dc = derived.at(i).node;
-        if (dc->access() == Node::Private) {
-            derived.removeAt(i);
+    while (i < derived_.size()) {
+        ClassNode* dc = derived_.at(i).node_;
+        if (dc && dc->access() == Node::Private) {
+            derived_.removeAt(i);
             const QList<RelatedClass> &dd = dc->derivedClasses();
             for (int j = dd.size() - 1; j >= 0; --j)
-                derived.insert(i, dd.at(j));
+                derived_.insert(i, dd.at(j));
         }
         else {
             ++i;
@@ -1530,12 +1548,34 @@ void ClassNode::fixBaseClasses()
 }
 
 /*!
+  Not sure why this is needed.
+ */
+void ClassNode::fixPropertyUsingBaseClasses(PropertyNode* pn)
+{
+    QList<RelatedClass>::const_iterator bc = baseClasses().constBegin();
+    while (bc != baseClasses().constEnd()) {
+        ClassNode* cn = bc->node_;
+        if (cn) {
+            Node* n = cn->findChildNode(pn->name(), Node::Property);
+            if (n) {
+                PropertyNode* baseProperty = static_cast<PropertyNode*>(n);
+                cn->fixPropertyUsingBaseClasses(baseProperty);
+                pn->setOverriddenFrom(baseProperty);
+            }
+            else
+                cn->fixPropertyUsingBaseClasses(pn);
+        }
+        ++bc;
+    }
+}
+
+/*!
   Search the child list to find the property node with the
   specified \a name.
  */
 PropertyNode* ClassNode::findPropertyNode(const QString& name)
 {
-    Node* n = findChildNodeByNameAndType(name, Node::Property);
+    Node* n = findChildNode(name, Node::Property);
 
     if (n)
         return static_cast<PropertyNode*>(n);
@@ -1545,19 +1585,23 @@ PropertyNode* ClassNode::findPropertyNode(const QString& name)
     const QList<RelatedClass> &bases = baseClasses();
     if (!bases.isEmpty()) {
         for (int i = 0; i < bases.size(); ++i) {
-            ClassNode* cn = bases[i].node;
-            pn = cn->findPropertyNode(name);
-            if (pn)
-                break;
+            ClassNode* cn = bases[i].node_;
+            if (cn) {
+                pn = cn->findPropertyNode(name);
+                if (pn)
+                    break;
+            }
         }
     }
     const QList<RelatedClass>& ignoredBases = ignoredBaseClasses();
     if (!ignoredBases.isEmpty()) {
         for (int i = 0; i < ignoredBases.size(); ++i) {
-            ClassNode* cn = ignoredBases[i].node;
-            pn = cn->findPropertyNode(name);
-            if (pn)
-                break;
+            ClassNode* cn = ignoredBases[i].node_;
+            if (cn) {
+                pn = cn->findPropertyNode(name);
+                if (pn)
+                    break;
+            }
         }
     }
 
@@ -1577,13 +1621,13 @@ QmlClassNode* ClassNode::findQmlBaseNode()
 
     if (!bases.isEmpty()) {
         for (int i = 0; i < bases.size(); ++i) {
-            ClassNode* cn = bases[i].node;
+            ClassNode* cn = bases[i].node_;
             if (cn && cn->qmlElement()) {
                 return cn->qmlElement();
             }
         }
         for (int i = 0; i < bases.size(); ++i) {
-            ClassNode* cn = bases[i].node;
+            ClassNode* cn = bases[i].node_;
             if (cn) {
                 result = cn->findQmlBaseNode();
                 if (result != 0) {
@@ -1614,34 +1658,25 @@ DocNode::DocNode(InnerNode* parent, const QString& name, SubType subtype, Node::
     case DitaMap:
         setPageType(ptype);
         break;
-    case Module:
-    case Group:
-        setPageType(OverviewPage);
-        break;
-    case QmlModule:
-        setPageType(OverviewPage);
-        break;
-    case QmlClass:
-    case QmlBasicType:
-        setPageType(ApiPage);
-        break;
     case Example:
         setPageType(ExamplePage);
         break;
-    case Collision:
-        setPageType(ptype);
-        break;
     default:
         break;
     }
 }
 
-/*!
+/*! \fn QString DocNode::title() const
   Returns the document node's title. This is used for the page title.
 */
-QString DocNode::title() const
+
+/*!
+  Sets the document node's \a title. This is used for the page title.
+ */
+void DocNode::setTitle(const QString &title)
 {
-    return title_;
+    title_ = title;
+    parent()->addChild(this, title);
 }
 
 /*!
@@ -1669,9 +1704,6 @@ QString DocNode::fullTitle() const
         else
             return name() + " - " + title();
     }
-    else if (nodeSubtype_ == Collision) {
-        return title();
-    }
     else {
         return title();
     }
@@ -1693,16 +1725,6 @@ QString DocNode::subTitle() const
 }
 
 /*!
-  The constructor calls the DocNode constructor with
-  \a parent, \a name, and Node::Example.
- */
-ExampleNode::ExampleNode(InnerNode* parent, const QString& name)
-    : DocNode(parent, name, Node::Example, Node::ExamplePage)
-{
-    // nothing
-}
-
-/*!
   \class EnumNode
  */
 
@@ -2115,18 +2137,17 @@ bool QmlClassNode::qmlOnly = false;
 QMultiMap<QString,Node*> QmlClassNode::inheritedBy;
 
 /*!
-  Constructs a Qml class node (i.e. a Document node with the
-  subtype QmlClass. The new node has the given \a parent
-  and \a name.
+  Constructs a Qml class node. The new node has the given
+  \a parent and \a name.
  */
 QmlClassNode::QmlClassNode(InnerNode *parent, const QString& name)
-    : DocNode(parent, name, QmlClass, Node::ApiPage),
+    : InnerNode(QmlType, parent, name),
       abstract_(false),
       cnodeRequired_(false),
       wrapper_(false),
       cnode_(0),
       qmlModule_(0),
-      baseNode_(0)
+      qmlBaseNode_(0)
 {
     int i = 0;
     if (name.startsWith("QML:")) {
@@ -2134,6 +2155,7 @@ QmlClassNode::QmlClassNode(InnerNode *parent, const QString& name)
         i = 4;
     }
     setTitle(name.mid(i));
+    setPageType(Node::ApiPage);
 }
 
 /*!
@@ -2198,6 +2220,14 @@ void QmlModuleNode::setQmlModuleInfo(const QString& arg)
     }
 }
 
+QmlClassNode* QmlClassNode::qmlBaseNode()
+{
+    if (!qmlBaseNode_ && !qmlBaseName_.isEmpty()) {
+        qmlBaseNode_ = QDocDatabase::qdocDB()->findQmlType(qmlBaseName_);
+    }
+    return qmlBaseNode_;
+}
+
 /*!
   If this QML type node has a base type node,
   return the fully qualified name of that QML
@@ -2206,45 +2236,13 @@ void QmlModuleNode::setQmlModuleInfo(const QString& arg)
 QString QmlClassNode::qmlFullBaseName() const
 {
     QString result;
-    if (baseNode_) {
-        result = baseNode_->qmlModuleName() + "::" + baseNode_->name();
+    if (qmlBaseNode_) {
+        result = qmlBaseNode_->qmlModuleName() + "::" + qmlBaseNode_->name();
     }
     return result;
 }
 
 /*!
-  The name of this QML class node might be the same as the
-  name of some other QML class node. If so, then this node's
-  parent will be a NameCollisionNode.This function sets the
-  NameCollisionNode's current child to this node. This is
-  important when outputting the documentation for this node,
-  when, for example, the documentation contains a link to
-  the page being output. We don't want to generate a link
-  to the disambiguation page if we can avoid it, and to be
-  able to avoid it, the NameCollisionNode must maintain the
-  current child pointer. That's the purpose of this function.
- */
-void QmlClassNode::setCurrentChild()
-{
-    if (parent()) {
-        InnerNode* n = parent();
-        if (n->subType() == Node::Collision)
-            n->setCurrentChild(this);
-    }
-}
-
-/*!
- */
-void QmlClassNode::clearCurrentChild()
-{
-    if (parent()) {
-        InnerNode* n = parent();
-        if (n->subType() == Node::Collision)
-            n->clearCurrentChild();
-    }
-}
-
-/*!
   If the QML type's QML module pointer is set, return the QML
   module name from the QML module node. Otherwise, return the
   empty string.
@@ -2275,13 +2273,12 @@ QString QmlClassNode::qmlModuleIdentifier() const
 }
 
 /*!
-  Constructs a Qml basic type node (i.e. a Document node with
-  the subtype QmlBasicType. The new node has the given
+  Constructs a Qml basic type node. The new node has the given
   \a parent and \a name.
  */
 QmlBasicTypeNode::QmlBasicTypeNode(InnerNode *parent,
                                    const QString& name)
-    : DocNode(parent, name, QmlBasicType, Node::ApiPage)
+    : InnerNode(QmlBasicType, parent, name)
 {
     setTitle(name);
 }
@@ -2345,7 +2342,7 @@ QmlPropertyNode::QmlPropertyNode(InnerNode* parent,
 
   ...because the tokenizer gets confused on \e{explicit}.
  */
-bool QmlPropertyNode::isWritable(QDocDatabase* qdb)
+bool QmlPropertyNode::isWritable()
 {
     if (readOnly_ != FlagValueDefault)
         return !fromFlagValue(readOnly_, false);
@@ -2354,7 +2351,7 @@ bool QmlPropertyNode::isWritable(QDocDatabase* qdb)
     if (qcn) {
         if (qcn->cppClassRequired()) {
             if (qcn->classNode()) {
-                PropertyNode* pn = correspondingProperty(qdb);
+                PropertyNode* pn = findCorrespondingCppProperty();
                 if (pn)
                     return pn->isWritable();
                 else
@@ -2377,157 +2374,61 @@ bool QmlPropertyNode::isWritable(QDocDatabase* qdb)
   Returns a pointer this QML property's corresponding C++
   property, if it has one.
  */
-PropertyNode* QmlPropertyNode::correspondingProperty(QDocDatabase* qdb)
+PropertyNode* QmlPropertyNode::findCorrespondingCppProperty()
 {
     PropertyNode* pn;
-
     Node* n = parent();
-    while (n && n->subType() != Node::QmlClass)
+    while (n && !n->isQmlType())
         n = n->parent();
     if (n) {
         QmlClassNode* qcn = static_cast<QmlClassNode*>(n);
         ClassNode* cn = qcn->classNode();
         if (cn) {
+            /*
+              If there is a dot in the property name, first
+              find the C++ property corresponding to the QML
+              property group.
+             */
             QStringList dotSplit = name().split(QChar('.'));
             pn = cn->findPropertyNode(dotSplit[0]);
             if (pn) {
+                /*
+                  Now find the C++ property corresponding to
+                  the QML property in the QML property group,
+                  <group>.<property>.
+                */
                 if (dotSplit.size() > 1) {
-                    // Find the C++ property corresponding to the QML property in
-                    // the property group, <group>.<property>.
-
                     QStringList path(extractClassName(pn->qualifiedDataType()));
-                    Node* nn = qdb->findClassNode(path);
+                    Node* nn = QDocDatabase::qdocDB()->findClassNode(path);
                     if (nn) {
                         ClassNode* cn = static_cast<ClassNode*>(nn);
                         PropertyNode *pn2 = cn->findPropertyNode(dotSplit[1]);
-                        if (pn2)
-                            return pn2; // Return the property for the QML property.
-                        else
-                            return pn;  // Return the property for the QML group.
+                        /*
+                          If found, return the C++ property
+                          corresponding to the QML property.
+                          Otherwise, return the C++ property
+                          corresponding to the QML property
+                          group.
+                        */
+                        return (pn2 ? pn2 : pn);
                     }
                 }
                 else
                     return pn;
             }
-            else {
-                pn = cn->findPropertyNode(dotSplit[0]);
-                if (pn)
-                    return pn;
-            }
         }
     }
-
-    return 0;
-}
-
-/*! \class NameCollisionNode
-
-  An instance of this node is inserted in the tree
-  whenever qdoc discovers that two nodes have the
-  same name.
- */
-
-/*!
-  Constructs a name collision node containing \a child
-  as its first child. The parent of \a child becomes
-  this node's parent.
- */
-NameCollisionNode::NameCollisionNode(InnerNode* child)
-    : DocNode(child->parent(), child->name(), Collision, Node::NoPageType)
-{
-    setTitle("Name Collision: " + child->name());
-    addCollision(child);
-    current = 0;
-}
-
-/*!
-  Add a collision to this collision node. \a child has
-  the same name as the other children in this collision
-  node. \a child becomes the current child.
- */
-void NameCollisionNode::addCollision(InnerNode* child)
-{
-    if (child) {
-        if (child->parent())
-            child->parent()->removeChild(child);
-        child->setParent((InnerNode*)this);
-        children_.append(child);
-    }
-}
-
-/*!
-  The destructor does nothing.
- */
-NameCollisionNode::~NameCollisionNode()
-{
-    // nothing.
-}
-
-/*! \fn const InnerNode* NameCollisionNode::currentChild() const
-  Returns a pointer to the current child, which may be 0.
- */
-
-/*! \fn void NameCollisionNode::setCurrentChild(InnerNode* child)
-  Sets the current child to \a child. The current child is
-  valid only within the file where it is defined.
- */
-
-/*! \fn void NameCollisionNode::clearCurrentChild()
-  Sets the current child to 0. This should be called at the
-  end of each file, because the current child is only valid
-  within the file where the child is defined.
- */
-
-/*!
-  Returns \c true if this collision node's current node is a QML node.
- */
-bool NameCollisionNode::isQmlNode() const
-{
-    if (current)
-        return current->isQmlNode();
-    return false;
-}
-
-/*!
-  Find any of this collision node's children that has type \a t
-  and subtype \a st and return a pointer to it.
-*/
-InnerNode* NameCollisionNode::findAny(Node::Type t, Node::SubType st)
-{
-    if (current) {
-        if (current->type() == t && current->subType() == st)
-            return current;
-    }
-    const NodeList& cn = childNodes();
-    NodeList::ConstIterator i = cn.constBegin();
-    while (i != cn.constEnd()) {
-        if ((*i)->type() == t && (*i)->subType() == st)
-            return static_cast<InnerNode*>(*i);
-        ++i;
-    }
     return 0;
 }
 
 /*!
-  This node is a name collision node. Find a child of this node
-  such that the child's QML module name matches origin's QML module
-  Name. Return the matching node, or return this node if there is
-  no matching node.
+  This returns the name of the owning QML type.
  */
-const Node* NameCollisionNode::applyModuleName(const Node* origin) const
+QString QmlPropertyNode::element() const
 {
-    if (origin && !origin->qmlModuleName().isEmpty()) {
-        const NodeList& cn = childNodes();
-        NodeList::ConstIterator i = cn.constBegin();
-        while (i != cn.constEnd()) {
-            if ((*i)->type() == Node::Document && (*i)->subType() == Node::QmlClass) {
-                if (origin->qmlModuleName() == (*i)->qmlModuleName())
-                    return (*i);
-            }
-            ++i;
-        }
-    }
-    return this;
+    if (parent()->isQmlPropertyGroup())
+        return parent()->element();
+    return parent()->name();
 }
 
 /*!
@@ -2539,15 +2440,17 @@ QString Node::fullDocumentName() const
     const Node* n = this;
 
     do {
-        if (!n->name().isEmpty() && n->type() != Node::QmlPropertyGroup)
+        if (!n->name().isEmpty() && !n->isQmlPropertyGroup())
             pieces.insert(0, n->name());
 
-        if (n->type() == Node::Document) {
-            if ((n->subType() == Node::QmlClass) && !n->qmlModuleName().isEmpty())
-                pieces.insert(0, n->qmlModuleName());
+        if (n->isQmlType() && !n->qmlModuleName().isEmpty()) {
+            pieces.insert(0, n->qmlModuleName());
             break;
         }
 
+        if (n->isDocNode())
+            break;
+
         // Examine the parent node if one exists.
         if (n->parent())
             n = n->parent();
@@ -2557,7 +2460,10 @@ QString Node::fullDocumentName() const
 
     // Create a name based on the type of the ancestor node.
     QString concatenator = "::";
-    if ((n->type() == Node::Document) && (n->subType() != Node::QmlClass))
+    if (n->isQmlType())
+        concatenator = QLatin1Char('.');
+
+    if (n->isDocNode())
         concatenator = QLatin1Char('#');
 
     return pieces.join(concatenator);
@@ -2732,16 +2638,15 @@ QString Node::idForNode() const
                 }
             }
             else if (parent_) {
-                if (parent_->type() == Class)
+                if (parent_->isClass())
                     str = "class-member-" + func->name();
-                else if (parent_->type() == Namespace)
+                else if (parent_->isNamespace())
                     str = "namespace-member-" + func->name();
+                else if (parent_->isQmlType())
+                    str = "qml-method-" + parent_->name().toLower() + "-" + func->name();
                 else if (parent_->type() == Document) {
-                    if (parent_->subType() == QmlClass)
-                        str = "qml-method-" + parent_->name().toLower() + "-" + func->name();
-                    else
-                        qDebug() << "qdoc internal error: Node subtype not handled:"
-                                 << parent_->subType() << func->name();
+                    qDebug() << "qdoc internal error: Node subtype not handled:"
+                             << parent_->subType() << func->name();
                 }
                 else
                     qDebug() << "qdoc internal error: Node type not handled:"
@@ -2752,15 +2657,16 @@ QString Node::idForNode() const
                 str += QLatin1Char('-') + QString::number(func->overloadNumber());
         }
         break;
+    case Node::QmlType:
+        str = "qml-class-" + name();
+        break;
+    case Node::QmlBasicType:
+        str = "qml-basic-type-" + name();
+        break;
     case Node::Document:
         {
             switch (subType()) {
-            case Node::QmlClass:
-                str = "qml-class-" + name();
-                break;
             case Node::Page:
-            case Node::Group:
-            case Node::Module:
             case Node::HeaderFile:
                 str = title();
                 if (str.isEmpty()) {
@@ -2778,16 +2684,6 @@ QString Node::idForNode() const
                 str = name();
                 str.replace(QLatin1Char('/'), QLatin1Char('-'));
                 break;
-            case Node::QmlBasicType:
-                str = "qml-basic-type-" + name();
-                break;
-            case Node::QmlModule:
-                str = "qml-module-" + name();
-                break;
-            case Node::Collision:
-                str = title();
-                str.replace(": ","-");
-                break;
             default:
                 qDebug() << "ERROR: A case was not handled in Node::idForNode():"
                          << "subType():" << subType() << "type():" << type();
@@ -2795,8 +2691,24 @@ QString Node::idForNode() const
             }
         }
         break;
+    case Node::Group:
+    case Node::Module:
+        str = title();
+        if (str.isEmpty()) {
+            str = name();
+            if (str.endsWith(".html"))
+                str.remove(str.size()-5,5);
+        }
+        str.replace(QLatin1Char('/'), QLatin1Char('-'));
+        break;
+    case Node::QmlModule:
+        str = "qml-module-" + name();
+        break;
     case Node::QmlProperty:
-        str = "qml-property-" + name();
+        if (isAttached())
+            str = "qml-attached-property-" + name();
+        else
+            str = "qml-property-" + name();
         break;
     case Node::QmlPropertyGroup:
         {
@@ -2855,10 +2767,93 @@ void InnerNode::printChildren(const QString& title)
 }
 
 /*!
-  Prints the inner node's list of members.
+  Returns \c true if the collection node's member list is
+  not empty.
+ */
+bool CollectionNode::hasMembers() const
+{
+    return !members_.isEmpty();
+}
+
+/*!
+  Appends \a node to the collection node's member list, if
+  and only if it isn't already in the member list.
+ */
+void CollectionNode::addMember(Node* node)
+{
+    if (!members_.contains(node))
+        members_.append(node);
+}
+
+/*!
+  Returns \c true if this collection node contains at least
+  one namespace node.
+ */
+bool CollectionNode::hasNamespaces() const
+{
+    if (!members_.isEmpty()) {
+        NodeList::const_iterator i = members_.begin();
+        while (i != members_.end()) {
+            if ((*i)->isNamespace())
+                return true;
+            ++i;
+        }
+    }
+    return false;
+}
+
+/*!
+  Returns \c true if this collection node contains at least
+  one class node.
+ */
+bool CollectionNode::hasClasses() const
+{
+    if (!members_.isEmpty()) {
+        NodeList::const_iterator i = members_.begin();
+        while (i != members_.end()) {
+            if ((*i)->isClass())
+                return true;
+            ++i;
+        }
+    }
+    return false;
+}
+
+/*!
+  Loads \a out with all this collection node's members that
+  are namespace nodes.
+ */
+void CollectionNode::getMemberNamespaces(NodeMap& out)
+{
+    out.clear();
+    NodeList::const_iterator i = members_.begin();
+    while (i != members_.end()) {
+        if ((*i)->isNamespace())
+            out.insert((*i)->name(),(*i));
+        ++i;
+    }
+}
+
+/*!
+  Loads \a out with all this collection node's members that
+  are class nodes.
+ */
+void CollectionNode::getMemberClasses(NodeMap& out)
+{
+    out.clear();
+    NodeList::const_iterator i = members_.begin();
+    while (i != members_.end()) {
+        if ((*i)->isClass())
+            out.insert((*i)->name(),(*i));
+        ++i;
+    }
+}
+
+/*!
+  Prints the collection node's list of members.
   For debugging only.
  */
-void InnerNode::printMembers(const QString& title)
+void CollectionNode::printMembers(const QString& title)
 {
     qDebug() << title << name() << members_.size();
     if (members_.size() > 0) {
@@ -2869,4 +2864,13 @@ void InnerNode::printMembers(const QString& title)
     }
 }
 
+/*!
+  Sets the document node's \a title. This is used for the page title.
+ */
+void CollectionNode::setTitle(const QString& title)
+{
+    title_ = title;
+    parent()->addChild(this, title);
+}
+
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/node.h b/src/tools/qdoc/node.h
index 236b495bd0..e25bbd7a4a 100644
--- a/src/tools/qdoc/node.h
+++ b/src/tools/qdoc/node.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -49,24 +41,31 @@
 
 #include "codechunk.h"
 #include "doc.h"
-#include "location.h"
-#include "text.h"
 
 QT_BEGIN_NAMESPACE
 
 class Node;
+class Tree;
+class EnumNode;
 class ClassNode;
 class InnerNode;
 class ExampleNode;
+class TypedefNode;
 class QmlClassNode;
 class QDocDatabase;
+class FunctionNode;
+class PropertyNode;
 class QmlModuleNode;
+class CollectionNode;
 class QmlPropertyNode;
 
 typedef QList<Node*> NodeList;
 typedef QMap<QString, Node*> NodeMap;
 typedef QMultiMap<QString, Node*> NodeMultiMap;
-typedef QMultiMap<QString, const ExampleNode*> ExampleNodeMap;
+typedef QPair<int, int> NodeTypePair;
+typedef QList<NodeTypePair> NodeTypeList;
+typedef QMap<QString, CollectionNode*> CNMap;
+typedef QMultiMap<QString, CollectionNode*> CNMultiMap;
 
 class Node
 {
@@ -74,6 +73,7 @@ class Node
 
 public:
     enum Type {
+        NoType,
         Namespace,
         Class,
         Document,
@@ -82,11 +82,16 @@ public:
         Function,
         Property,
         Variable,
+        Group,
+        Module,
+        QmlType,
+        QmlModule,
         QmlPropertyGroup,
         QmlProperty,
         QmlSignal,
         QmlSignalHandler,
         QmlMethod,
+        QmlBasicType,
         LastType
     };
 
@@ -96,18 +101,14 @@ public:
         HeaderFile,
         File,
         Image,
-        Group,
-        Module,
         Page,
         ExternalPage,
-        QmlClass,
-        QmlBasicType,
-        QmlModule,
         DitaMap,
-        Collision,
         LastSubtype
     };
 
+    enum Genus { DontCare, CPP, QML };
+
     enum Access { Public, Protected, Private };
 
     enum Status {
@@ -165,10 +166,11 @@ public:
     QString plainName() const;
     QString plainFullName(const Node* relative = 0) const;
     QString fullName(const Node* relative=0) const;
-    const QString& baseName() const { return baseName_; }
-    bool hasBaseName() const { return !baseName_.isEmpty(); }
 
-    void setBaseName(const QString& bn) { baseName_ = bn; }
+    const QString& fileNameBase() const { return fileNameBase_; }
+    bool hasFileNameBase() const { return !fileNameBase_.isEmpty(); }
+    void setFileNameBase(const QString& t) { fileNameBase_ = t; }
+
     void setAccess(Access access) { access_ = access; }
     void setLocation(const Location& location) { loc_ = location; }
     void setDoc(const Doc& doc, bool replace = false);
@@ -181,8 +183,7 @@ public:
     void setSince(const QString &since);
     void setRelates(InnerNode* pseudoParent);
     void setModuleName(const QString &name) { moduleName_ = name; }
-    void setLink(LinkType linkType, const QString &link, const QString &desc);
-    void setUrl(const QString &url);
+    void setUrl(const QString& url) { url_ = url; }
     void setTemplateStuff(const QString &templateStuff) { templateStuff_ = templateStuff; }
     void setReconstitutedBrief(const QString &t) { reconstitutedBrief_ = t; }
     void setPageType(PageType t) { pageType_ = t; }
@@ -190,27 +191,30 @@ public:
     void setParent(InnerNode* n) { parent_ = n; }
     void setIndexNodeFlag() { indexNodeFlag_ = true; }
     virtual void setOutputFileName(const QString& ) { }
-    void markSeen() { seen_ = true; }
-    void markNotSeen() { seen_ = false; }
 
     virtual bool isInnerNode() const = 0;
+    virtual bool isDocNode() const { return false; }
+    virtual bool isCollectionNode() const { return false; }
+    virtual bool isGroup() const { return false; }
+    virtual bool isModule() const { return false; }
     virtual bool isQmlModule() const { return false; }
     virtual bool isQmlType() const { return false; }
+    virtual bool isQmlBasicType() const { return false; }
     virtual bool isExample() const { return false; }
     virtual bool isExampleFile() const { return false; }
+    virtual bool isHeaderFile() const { return false; }
     virtual bool isLeaf() const { return false; }
     virtual bool isReimp() const { return false; }
     virtual bool isFunction() const { return false; }
     virtual bool isNamespace() const { return false; }
     virtual bool isClass() const { return false; }
     virtual bool isQmlNode() const { return false; }
+    virtual bool isCppNode() const { return false; }
     virtual bool isQtQuickNode() const { return false; }
     virtual bool isAbstract() const { return false; }
     virtual bool isQmlPropertyGroup() const { return false; }
-    virtual bool isCollisionNode() const { return false; }
     virtual bool isAttached() const { return false; }
     virtual bool isAlias() const { return false; }
-    virtual bool isGroup() const { return false; }
     virtual bool isWrapper() const;
     virtual bool isReadOnly() const { return false; }
     virtual bool isDefault() const { return false; }
@@ -221,34 +225,54 @@ public:
     virtual bool hasClasses() const { return false; }
     virtual void setAbstract(bool ) { }
     virtual void setWrapper() { }
-    virtual QString title() const { return QString(); }
+    virtual Node::Genus genus() const { return DontCare; }
+    virtual QString title() const { return name(); }
+    virtual QString fullTitle() const { return name(); }
+    virtual QString subTitle() const { return QString(); }
+    virtual void setTitle(const QString& ) { }
+    virtual void setSubTitle(const QString& ) { }
     virtual QmlPropertyNode* hasQmlProperty(const QString& ) const { return 0; }
+    virtual QmlPropertyNode* hasQmlProperty(const QString&, bool ) const { return 0; }
     virtual void getMemberNamespaces(NodeMap& ) { }
     virtual void getMemberClasses(NodeMap& ) { }
     virtual bool isInternal() const;
     virtual void setDataType(const QString& ) { }
     virtual void setReadOnly(bool ) { }
+    virtual Node* disambiguate(Type , SubType ) { return this; }
+    virtual bool wasSeen() const { return false; }
+    virtual void appendGroupName(const QString& ) { }
+    virtual QString element() const { return QString(); }
+    virtual Tree* tree() const;
+    virtual void findChildren(const QString& , NodeList& nodes) const { nodes.clear(); }
     bool isIndexNode() const { return indexNodeFlag_; }
-    bool wasSeen() const { return seen_; }
     Type type() const { return nodeType_; }
     virtual SubType subType() const { return NoSubType; }
+    bool match(const NodeTypeList& types) const;
     InnerNode* parent() const { return parent_; }
+    const Node* root() const;
     InnerNode* relates() const { return relatesTo_; }
     const QString& name() const { return name_; }
-    const QMap<LinkType, QPair<QString,QString> >& links() const { return linkMap_; }
     QString moduleName() const;
-    QString url() const;
+    QString url() const { return url_; }
     virtual QString nameForLists() const { return name_; }
     virtual QString outputFileName() const { return QString(); }
     virtual QString obsoleteLink() const { return QString(); }
     virtual void setObsoleteLink(const QString& ) { };
+    virtual void setQtVariable(const QString& ) { }
+    virtual QString qtVariable() const { return QString(); }
+
+    const QMap<LinkType, QPair<QString,QString> >& links() const { return linkMap_; }
+    void setLink(LinkType linkType, const QString &link, const QString &desc);
 
     Access access() const { return access_; }
+    bool isPrivate() const { return access_ == Private; }
     QString accessString() const;
     const Location& location() const { return loc_; }
     const Doc& doc() const { return doc_; }
+    bool hasDoc() const { return !doc_.isEmpty(); }
     Status status() const { return status_; }
     Status inheritedStatus() const;
+    bool isObsolete() const { return (status_ == Obsolete); }
     ThreadSafeness threadSafeness() const;
     ThreadSafeness inheritedThreadSafeness() const;
     QString since() const { return since_; }
@@ -274,7 +298,6 @@ public:
     virtual void setQmlModule(QmlModuleNode* ) { }
     virtual ClassNode* classNode() { return 0; }
     virtual void setClassNode(ClassNode* ) { }
-    virtual void clearCurrentChild() { }
     virtual const Node* applyModuleName(const Node* ) const { return 0; }
     virtual QString idNumber() { return "0"; }
     QmlClassNode* qmlClassNode();
@@ -293,6 +316,8 @@ public:
     static QString nodeSubtypeString(unsigned t);
     static int incPropertyGroupCount();
     static void clearPropertyGroupCount();
+    static void initialize();
+    static Type goal(const QString& t) { return goals_.value(t); }
 
 protected:
     Node(Type type, InnerNode* parent, const QString& name);
@@ -305,7 +330,6 @@ private:
     PageType pageType_;
     Status status_;
     bool indexNodeFlag_;
-    bool seen_;
 
     InnerNode* parent_;
     InnerNode* relatesTo_;
@@ -313,7 +337,7 @@ private:
     Location loc_;
     Doc doc_;
     QMap<LinkType, QPair<QString, QString> > linkMap_;
-    QString baseName_;
+    QString fileNameBase_;
     QString moduleName_;
     QString url_;
     QString since_;
@@ -323,51 +347,35 @@ private:
     QString outSubDir_;
     static QStringMap operators_;
     static int propertyGroupCount_;
+    static QMap<QString,Node::Type> goals_;
 };
 
-class FunctionNode;
-class EnumNode;
-class NameCollisionNode;
-
 class InnerNode : public Node
 {
 public:
     virtual ~InnerNode();
 
-    Node* findChildNodeByName(const QString& name);
-    Node* findChildNodeByName(const QString& name, bool qml);
-    Node* findChildNodeByNameAndType(const QString& name, Type type);
-    void findNodes(const QString& name, QList<Node*>& n);
-    FunctionNode* findFunctionNode(const QString& name);
+    Node* findChildNode(const QString& name, Node::Genus genus) const;
+    //Node* findChildNode(const QString& name, bool qml) const;
+    Node* findChildNode(const QString& name, Type type);
+    //void findNodes(const QString& name, NodeList& n);
+    virtual void findChildren(const QString& name, NodeList& nodes) const;
+    FunctionNode* findFunctionNode(const QString& name) const;
     FunctionNode* findFunctionNode(const FunctionNode* clone);
     void addInclude(const QString &include);
     void setIncludes(const QStringList &includes);
     void setOverload(const FunctionNode* func, bool overlode);
     void normalizeOverloads();
     void makeUndocumentedChildrenInternal();
-    void clearCurrentChildPointers();
     void deleteChildren();
     void removeFromRelated();
 
     virtual bool isInnerNode() const { return true; }
     virtual bool isLeaf() const { return false; }
-    const Node* findChildNodeByName(const QString& name) const;
-    const Node* findChildNodeByName(const QString& name, bool qml) const;
-    const Node* findChildNodeByNameAndType(const QString& name, Type type) const;
-    const FunctionNode* findFunctionNode(const QString& name) const;
-    const FunctionNode* findFunctionNode(const FunctionNode* clone) const;
     const EnumNode* findEnumNodeForValue(const QString &enumValue) const;
     const NodeList & childNodes() const { return children_; }
     const NodeList & relatedNodes() const { return related_; }
 
-    virtual void addMember(Node* node);
-    const NodeList& members() const { return members_; }
-    virtual bool hasMembers() const;
-    virtual bool hasNamespaces() const;
-    virtual bool hasClasses() const;
-    virtual void getMemberNamespaces(NodeMap& out);
-    virtual void getMemberClasses(NodeMap& out);
-
     int count() const { return children_.size(); }
     int overloadNumber(const FunctionNode* func) const;
     NodeList overloads(const QString &funcName) const;
@@ -377,21 +385,20 @@ public:
     QStringList secondaryKeys();
     const QStringList& pageKeywords() const { return pageKeywds; }
     virtual void addPageKeywords(const QString& t) { pageKeywds << t; }
-    virtual void setCurrentChild() { }
-    virtual void setCurrentChild(InnerNode* ) { }
     virtual void setOutputFileName(const QString& f) { outputFileName_ = f; }
     virtual QString outputFileName() const { return outputFileName_; }
     virtual QmlPropertyNode* hasQmlProperty(const QString& ) const;
-
+    virtual QmlPropertyNode* hasQmlProperty(const QString&, bool attached) const;
+    void addChild(Node* child, const QString& title);
+    const QStringList& groupNames() const { return groupNames_; }
+    virtual void appendGroupName(const QString& t) { groupNames_.append(t); }
     void printChildren(const QString& title);
-    void printMembers(const QString& title);
 
 protected:
     InnerNode(Type type, InnerNode* parent, const QString& name);
 
 private:
     friend class Node;
-    friend class NameCollisionNode;
 
     static bool isSameSignature(const FunctionNode* f1, const FunctionNode* f2);
     void addChild(Node* child);
@@ -401,8 +408,8 @@ private:
     QString outputFileName_;
     QStringList pageKeywds;
     QStringList includes_;
+    QStringList groupNames_;
     NodeList children_;
-    NodeList members_;
     NodeList enumChildren_;
     NodeList related_;
     QMap<QString, Node*> childMap;
@@ -430,47 +437,59 @@ public:
     NamespaceNode(InnerNode* parent, const QString& name);
     virtual ~NamespaceNode() { }
     virtual bool isNamespace() const { return true; }
-};
+    virtual Tree* tree() const { return (parent() ? parent()->tree() : tree_); }
+    virtual bool isCppNode() const { return true; }
+    virtual Node::Genus genus() const { return Node::CPP; }
+    void setTree(Tree* t) { tree_ = t; }
 
-class ClassNode;
+ private:
+    Tree*       tree_;
+};
 
 struct RelatedClass
 {
     RelatedClass() { }
-    RelatedClass(Node::Access access0,
-                 ClassNode* node0,
-                 const QString& dataTypeWithTemplateArgs0 = QString())
-        : access(access0),
-          node(node0),
-          dataTypeWithTemplateArgs(dataTypeWithTemplateArgs0) { }
+    // constructor for resolved base class
+    RelatedClass(Node::Access access, ClassNode* node)
+        : access_(access), node_(node) { }
+    // constructor for unresolved base class
+    RelatedClass(Node::Access access, const QStringList& path, const QString& signature)
+        : access_(access), node_(0), path_(path), signature_(signature) { }
     QString accessString() const;
+    bool isPrivate() const { return (access_ == Node::Private); }
 
-    Node::Access        access;
-    ClassNode*          node;
-    QString             dataTypeWithTemplateArgs;
+    Node::Access        access_;
+    ClassNode*          node_;
+    QStringList         path_;
+    QString             signature_;
 };
 
-class PropertyNode;
-
 class ClassNode : public InnerNode
 {
 public:
     ClassNode(InnerNode* parent, const QString& name);
     virtual ~ClassNode() { }
     virtual bool isClass() const { return true; }
+    virtual bool isCppNode() const { return true; }
     virtual bool isWrapper() const { return wrapper_; }
+    virtual Node::Genus genus() const { return Node::CPP; }
     virtual QString obsoleteLink() const { return obsoleteLink_; }
     virtual void setObsoleteLink(const QString& t) { obsoleteLink_ = t; }
     virtual void setWrapper() { wrapper_ = true; }
 
-    void addBaseClass(Access access,
-                      ClassNode* node,
-                      const QString &dataTypeWithTemplateArgs = QString());
+    void addResolvedBaseClass(Access access, ClassNode* node);
+    void addDerivedClass(Access access, ClassNode* node);
+    void addUnresolvedBaseClass(Access access, const QStringList& path, const QString& signature);
     void fixBaseClasses();
+    void fixPropertyUsingBaseClasses(PropertyNode* pn);
+
+    QList<RelatedClass>& baseClasses() { return bases_; }
+    QList<RelatedClass>& derivedClasses() { return derived_; }
+    QList<RelatedClass>& ignoredBaseClasses() { return ignoredBases_; }
 
-    const QList<RelatedClass> &baseClasses() const { return bases; }
-    const QList<RelatedClass> &derivedClasses() const { return derived; }
-    const QList<RelatedClass> &ignoredBaseClasses() const { return ignoredBases; }
+    const QList<RelatedClass> &baseClasses() const { return bases_; }
+    const QList<RelatedClass> &derivedClasses() const { return derived_; }
+    const QList<RelatedClass> &ignoredBaseClasses() const { return ignoredBases_; }
 
     QString serviceName() const { return sname; }
     void setServiceName(const QString& value) { sname = value; }
@@ -482,9 +501,9 @@ public:
     QmlClassNode* findQmlBaseNode();
 
 private:
-    QList<RelatedClass> bases;
-    QList<RelatedClass> derived;
-    QList<RelatedClass> ignoredBases;
+    QList<RelatedClass> bases_;
+    QList<RelatedClass> derived_;
+    QList<RelatedClass> ignoredBases_;
     bool abstract_;
     bool wrapper_;
     QString sname;
@@ -502,85 +521,37 @@ public:
              PageType ptype);
     virtual ~DocNode() { }
 
-    void setQtVariable(const QString &variable) { qtVariable_ = variable; }
-    void setTitle(const QString &title) { title_ = title; }
-    void setSubTitle(const QString &subTitle) { subtitle_ = subTitle; }
+    virtual void setTitle(const QString &title);
+    virtual void setSubTitle(const QString &subTitle) { subtitle_ = subTitle; }
 
-    QString qtVariable() const { return qtVariable_; }
     SubType subType() const { return nodeSubtype_; }
-    virtual QString title() const;
+    virtual QString title() const { return title_; }
     virtual QString fullTitle() const;
     virtual QString subTitle() const;
     virtual QString imageFileName() const { return QString(); }
     virtual QString nameForLists() const { return title(); }
     virtual void setImageFileName(const QString& ) { }
-    virtual bool isGroup() const { return (subType() == Node::Group); }
+    virtual bool isHeaderFile() const { return (subType() == Node::HeaderFile); }
     virtual bool isExample() const { return (subType() == Node::Example); }
     virtual bool isExampleFile() const { return (parent() && parent()->isExample()); }
     virtual bool isExternalPage() const { return nodeSubtype_ == ExternalPage; }
+    virtual bool isDocNode() const { return true; }
 
 protected:
     SubType nodeSubtype_;
     QString title_;
     QString subtitle_;
-
-private:
-    QString qtVariable_;
-};
-
-class QmlModuleNode : public DocNode
-{
- public:
-    QmlModuleNode(InnerNode* parent, const QString& name)
-        : DocNode(parent, name, Node::QmlModule, Node::OverviewPage) { }
-    virtual ~QmlModuleNode() { }
-
-    virtual bool isQmlModule() const { return true; }
-    virtual QString qmlModuleName() const { return qmlModuleName_; }
-    virtual QString qmlModuleVersion() const { return qmlModuleVersionMajor_ + "." + qmlModuleVersionMinor_; }
-    virtual QString qmlModuleIdentifier() const { return qmlModuleName_ + qmlModuleVersionMajor_; }
-    virtual void setQmlModuleInfo(const QString& );
-
- private:
-    QString     qmlModuleName_;
-    QString     qmlModuleVersionMajor_;
-    QString     qmlModuleVersionMinor_;
-};
-
-class NameCollisionNode : public DocNode
-{
-public:
-    NameCollisionNode(InnerNode* child);
-    ~NameCollisionNode();
-    const InnerNode* currentChild() const { return current; }
-    virtual void setCurrentChild(InnerNode* child) { current = child; }
-    virtual void clearCurrentChild() { current = 0; }
-    virtual bool isQmlNode() const;
-    virtual bool isCollisionNode() const { return true; }
-    virtual const Node* applyModuleName(const Node* origin) const;
-    InnerNode* findAny(Node::Type t, Node::SubType st);
-    void addCollision(InnerNode* child);
-    const QMap<QString,QString>& linkTargets() const { return targets; }
-    void addLinkTarget(const QString& t, const QString& v) { targets.insert(t,v); }
-
-private:
-    InnerNode* current;
-    QMap<QString,QString> targets;
 };
 
 class ExampleNode : public DocNode
 {
 public:
-    ExampleNode(InnerNode* parent, const QString& name);
+    ExampleNode(InnerNode* parent, const QString& name)
+        : DocNode(parent, name, Node::Example, Node::ExamplePage) { }
     virtual ~ExampleNode() { }
     virtual QString imageFileName() const { return imageFileName_; }
     virtual void setImageFileName(const QString& ifn) { imageFileName_ = ifn; }
 
-    static void terminate() { exampleNodeMap.clear(); }
-
-public:
-    static ExampleNodeMap exampleNodeMap;
-
 private:
     QString imageFileName_;
 };
@@ -605,7 +576,7 @@ struct ImportRec {
 
 typedef QList<ImportRec> ImportList;
 
-class QmlClassNode : public DocNode
+class QmlClassNode : public InnerNode
 {
 public:
     QmlClassNode(InnerNode* parent, const QString& name);
@@ -615,8 +586,6 @@ public:
     virtual bool isQtQuickNode() const { return (qmlModuleName() == QLatin1String("QtQuick")); }
     virtual ClassNode* classNode() { return cnode_; }
     virtual void setClassNode(ClassNode* cn) { cnode_ = cn; }
-    virtual void setCurrentChild();
-    virtual void clearCurrentChild();
     virtual bool isAbstract() const { return abstract_; }
     virtual bool isWrapper() const { return wrapper_; }
     virtual void setAbstract(bool b) { abstract_ = b; }
@@ -630,12 +599,14 @@ public:
     virtual QString qmlModuleIdentifier() const;
     virtual QmlModuleNode* qmlModule() const { return qmlModule_; }
     virtual void setQmlModule(QmlModuleNode* t) { qmlModule_ = t; }
+    virtual Node::Genus genus() const { return Node::QML; }
     const ImportList& importList() const { return importList_; }
     void setImportList(const ImportList& il) { importList_ = il; }
-    const QString& qmlBaseName() const { return baseName_; }
-    void setQmlBaseName(const QString& name) { baseName_ = name; }
-    const QmlClassNode* qmlBaseNode() const { return baseNode_; }
-    void setQmlBaseNode(QmlClassNode* b) { baseNode_ = b; }
+    const QString& qmlBaseName() const { return qmlBaseName_; }
+    void setQmlBaseName(const QString& name) { qmlBaseName_ = name; }
+    bool qmlBaseNodeNotSet() const { return (qmlBaseNode_ == 0); }
+    QmlClassNode* qmlBaseNode();
+    void setQmlBaseNode(QmlClassNode* b) { qmlBaseNode_ = b; }
     void requireCppClass() { cnodeRequired_ = true; }
     bool cppClassRequired() const { return cnodeRequired_; }
     static void addInheritedBy(const QString& base, Node* sub);
@@ -651,20 +622,22 @@ private:
     bool cnodeRequired_;
     bool wrapper_;
     ClassNode*    cnode_;
-    QString      baseName_;
+    QString             qmlBaseName_;
     QString             obsoleteLink_;
     QmlModuleNode*      qmlModule_;
-    QmlClassNode*       baseNode_;
+    QmlClassNode*       qmlBaseNode_;
     ImportList          importList_;
 };
 
-class QmlBasicTypeNode : public DocNode
+class QmlBasicTypeNode : public InnerNode
 {
 public:
     QmlBasicTypeNode(InnerNode* parent,
                      const QString& name);
     virtual ~QmlBasicTypeNode() { }
     virtual bool isQmlNode() const { return true; }
+    virtual bool isQmlBasicType() const { return true; }
+    virtual Node::Genus genus() const { return Node::QML; }
 };
 
 class QmlPropertyGroupNode : public InnerNode
@@ -680,15 +653,14 @@ public:
     virtual QString qmlModuleIdentifier() const { return parent()->qmlModuleIdentifier(); }
     virtual QString idNumber();
     virtual bool isQmlPropertyGroup() const { return true; }
+    virtual Node::Genus genus() const { return Node::QML; }
 
-    const QString& element() const { return parent()->name(); }
+    virtual QString element() const { return parent()->name(); }
 
  private:
     int     idNumber_;
 };
 
-class QmlPropertyNode;
-
 class QmlPropertyNode : public LeafNode
 {
     Q_DECLARE_TR_FUNCTIONS(QDoc::QmlPropertyNode)
@@ -700,6 +672,7 @@ public:
                     bool attached);
     virtual ~QmlPropertyNode() { }
 
+    virtual Node::Genus genus() const { return Node::QML; }
     virtual void setDataType(const QString& dataType) { type_ = dataType; }
     void setStored(bool stored) { stored_ = toFlagValue(stored); }
     void setDesignable(bool designable) { designable_ = toFlagValue(designable); }
@@ -711,7 +684,7 @@ public:
     bool isReadOnlySet() const { return (readOnly_ != FlagValueDefault); }
     bool isStored() const { return fromFlagValue(stored_,true); }
     bool isDesignable() const { return fromFlagValue(designable_,false); }
-    bool isWritable(QDocDatabase* qdb);
+    bool isWritable();
     virtual bool isDefault() const { return isdefault_; }
     virtual bool isReadOnly() const { return fromFlagValue(readOnly_,false); }
     virtual bool isAlias() const { return isAlias_; }
@@ -722,10 +695,10 @@ public:
     virtual QString qmlModuleName() const { return parent()->qmlModuleName(); }
     virtual QString qmlModuleVersion() const { return parent()->qmlModuleVersion(); }
     virtual QString qmlModuleIdentifier() const { return parent()->qmlModuleIdentifier(); }
+    virtual QString element() const;
 
-    PropertyNode* correspondingProperty(QDocDatabase* qdb);
-
-    const QString& element() const { return static_cast<QmlPropertyGroupNode*>(parent())->element(); }
+ private:
+    PropertyNode* findCorrespondingCppProperty();
 
 private:
     QString type_;
@@ -743,27 +716,23 @@ public:
     EnumItem() { }
     EnumItem(const QString& name, const QString& value)
         : nam(name), val(value) { }
-    EnumItem(const QString& name, const QString& value, const Text &txt)
-        : nam(name), val(value), txt(txt) { }
 
     const QString& name() const { return nam; }
     const QString& value() const { return val; }
-    const Text &text() const { return txt; }
 
 private:
     QString nam;
     QString val;
-    Text txt;
 };
 
-class TypedefNode;
-
 class EnumNode : public LeafNode
 {
 public:
     EnumNode(InnerNode* parent, const QString& name);
     virtual ~EnumNode() { }
 
+    virtual Node::Genus genus() const { return Node::CPP; }
+    virtual bool isCppNode() const { return true; }
     void addItem(const EnumItem& item);
     void setFlagsType(TypedefNode* typedeff);
     bool hasItem(const QString &name) const { return names.contains(name); }
@@ -785,6 +754,8 @@ public:
     TypedefNode(InnerNode* parent, const QString& name);
     virtual ~TypedefNode() { }
 
+    virtual Node::Genus genus() const { return Node::CPP; }
+    virtual bool isCppNode() const { return true; }
     const EnumNode* associatedEnum() const { return ae; }
 
 private:
@@ -831,8 +802,6 @@ private:
     QString def;
 };
 
-class PropertyNode;
-
 class FunctionNode : public LeafNode
 {
 public:
@@ -886,13 +855,15 @@ public:
 
     QStringList reconstructParams(bool values = false) const;
     QString signature(bool values = false) const;
-    const QString& element() const { return parent()->name(); }
+    virtual QString element() const { return parent()->name(); }
     virtual bool isAttached() const { return attached_; }
     virtual bool isQmlNode() const {
         return ((type() == QmlSignal) ||
                 (type() == QmlMethod) ||
                 (type() == QmlSignalHandler));
     }
+    virtual bool isCppNode() const { return !isQmlNode(); }
+    virtual Node::Genus genus() const { return (isQmlNode() ? Node::QML : Node::CPP); }
     virtual bool isQtQuickNode() const { return parent()->isQtQuickNode(); }
     virtual QString qmlTypeName() const { return parent()->qmlTypeName(); }
     virtual QString qmlModuleName() const { return parent()->qmlModuleName(); }
@@ -931,6 +902,8 @@ public:
     PropertyNode(InnerNode* parent, const QString& name);
     virtual ~PropertyNode() { }
 
+    virtual Node::Genus genus() const { return Node::CPP; }
+    virtual bool isCppNode() const { return true; }
     virtual void setDataType(const QString& dataType) { type_ = dataType; }
     void addFunction(FunctionNode* function, FunctionRole role);
     void addSignal(FunctionNode* function, FunctionRole role);
@@ -1018,6 +991,8 @@ public:
     VariableNode(InnerNode* parent, const QString &name);
     virtual ~VariableNode() { }
 
+    virtual Node::Genus genus() const { return Node::CPP; }
+    virtual bool isCppNode() const { return true; }
     void setLeftType(const QString &leftType) { lt = leftType; }
     void setRightType(const QString &rightType) { rt = rightType; }
     void setStatic(bool statique) { sta = statique; }
@@ -1049,6 +1024,96 @@ public:
     const DitaRefList& map() const { return doc().ditamap(); }
 };
 
+class CollectionNode : public InnerNode
+{
+ public:
+    CollectionNode(Type type, InnerNode* parent, const QString& name)
+        : InnerNode(type, parent, name), seen_(false) {
+        setPageType(Node::OverviewPage);
+    }
+    virtual ~CollectionNode() { }
+
+    virtual bool isCollectionNode() const { return true; }
+    virtual void addMember(Node* node);
+    virtual bool hasMembers() const;
+    virtual bool hasNamespaces() const;
+    virtual bool hasClasses() const;
+    virtual void getMemberNamespaces(NodeMap& out);
+    virtual void getMemberClasses(NodeMap& out);
+    virtual bool wasSeen() const { return seen_; }
+    virtual QString title() const { return title_; }
+    virtual QString subTitle() const { return subtitle_; }
+    virtual QString fullTitle() const { return title_; }
+    virtual QString nameForLists() const { return title_; }
+    virtual void setTitle(const QString &title);
+    virtual void setSubTitle(const QString &subTitle) { subtitle_ = subTitle; }
+
+    const NodeList& members() const { return members_; }
+    void printMembers(const QString& title);
+
+    void markSeen() { seen_ = true; }
+    void markNotSeen() { seen_ = false; }
+
+ private:
+    bool        seen_;
+    QString     title_;
+    QString     subtitle_;
+    NodeList    members_;
+};
+
+class GroupNode : public CollectionNode
+{
+ public:
+    GroupNode(InnerNode* parent, const QString& name)
+        : CollectionNode(Node::Group, parent, name) { }
+    virtual ~GroupNode() { }
+
+    virtual bool isGroup() const { return true; }
+};
+
+class ModuleNode : public CollectionNode
+{
+ public:
+    ModuleNode(InnerNode* parent, const QString& name)
+        : CollectionNode(Node::Module, parent, name) { }
+    virtual ~ModuleNode() { }
+
+    virtual bool isModule() const { return true; }
+    virtual bool isCppNode() const { return true; }
+    virtual void setQtVariable(const QString& v) { qtVariable_ = v; }
+    virtual QString qtVariable() const { return qtVariable_; }
+
+ private:
+    QString     qtVariable_;
+};
+
+class QmlModuleNode : public CollectionNode
+{
+ public:
+    QmlModuleNode(InnerNode* parent, const QString& name)
+        : CollectionNode(Node::QmlModule, parent, name) { }
+    virtual ~QmlModuleNode() { }
+
+    virtual bool isQmlNode() const { return true; }
+    virtual bool isQmlModule() const { return true; }
+    virtual QString qmlModuleName() const { return qmlModuleName_; }
+    virtual QString qmlModuleVersion() const {
+        return qmlModuleVersionMajor_ + "." + qmlModuleVersionMinor_;
+    }
+    virtual QString qmlModuleIdentifier() const {
+        return qmlModuleName_ + qmlModuleVersionMajor_;
+    }
+    virtual void setQmlModuleInfo(const QString& );
+    virtual void setQtVariable(const QString& v) { qtVariable_ = v; }
+    virtual QString qtVariable() const { return qtVariable_; }
+
+ private:
+    QString     qmlModuleName_;
+    QString     qmlModuleVersionMajor_;
+    QString     qmlModuleVersionMinor_;
+    QString     qtVariable_;
+};
+
 QT_END_NAMESPACE
 
 #endif
diff --git a/src/tools/qdoc/openedlist.cpp b/src/tools/qdoc/openedlist.cpp
index 09098d05ac..001901d550 100644
--- a/src/tools/qdoc/openedlist.cpp
+++ b/src/tools/qdoc/openedlist.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/openedlist.h b/src/tools/qdoc/openedlist.h
index 2aad1f6dcb..c2139248ab 100644
--- a/src/tools/qdoc/openedlist.h
+++ b/src/tools/qdoc/openedlist.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/plaincodemarker.cpp b/src/tools/qdoc/plaincodemarker.cpp
index aee9f67592..a35f766637 100644
--- a/src/tools/qdoc/plaincodemarker.cpp
+++ b/src/tools/qdoc/plaincodemarker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/plaincodemarker.h b/src/tools/qdoc/plaincodemarker.h
index cb84c1e6b1..df6beebd03 100644
--- a/src/tools/qdoc/plaincodemarker.h
+++ b/src/tools/qdoc/plaincodemarker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/puredocparser.cpp b/src/tools/qdoc/puredocparser.cpp
index 644fe05438..7ff4c24399 100644
--- a/src/tools/qdoc/puredocparser.cpp
+++ b/src/tools/qdoc/puredocparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -202,7 +194,7 @@ bool PureDocParser::processQdocComments()
                 }
             }
 
-            Node* treeRoot = QDocDatabase::qdocDB()->treeRoot();
+            Node* treeRoot = QDocDatabase::qdocDB()->primaryTreeRoot();
             NodeList::Iterator n = nodes.begin();
             QList<Doc>::Iterator d = docs.begin();
             while (n != nodes.end()) {
diff --git a/src/tools/qdoc/puredocparser.h b/src/tools/qdoc/puredocparser.h
index 0174af7a4e..e6a4eca9d8 100644
--- a/src/tools/qdoc/puredocparser.h
+++ b/src/tools/qdoc/puredocparser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,7 +48,6 @@ QT_BEGIN_NAMESPACE
 class Config;
 class Node;
 class QString;
-class Tree;
 
 class PureDocParser : public CppCodeParser
 {
diff --git a/src/tools/qdoc/qdocdatabase.cpp b/src/tools/qdoc/qdocdatabase.cpp
index 1011a3ac97..fff78b1cbc 100644
--- a/src/tools/qdoc/qdocdatabase.cpp
+++ b/src/tools/qdoc/qdocdatabase.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,46 +43,434 @@ QT_BEGIN_NAMESPACE
 
 static NodeMap emptyNodeMap_;
 static NodeMultiMap emptyNodeMultiMap_;
+bool QDocDatabase::debug = false;
+
+/*! \class QDocForest
+  This class manages a collection of trees. Each tree is an
+  instance of class Tree, which is a private class.
+
+  The forest is populated as each index file is loaded.
+  Each index file adds a tree to the forest. Each tree
+  is named with the name of the module it represents.
+
+  The search order is created by searchOrder(), if it has
+  not already been created. The search order and module
+  names arrays have parallel structure, i.e. modulNames_[i]
+  is the module name of the Tree at searchOrder_[i].
+ */
+
+/*!
+  Destroys the qdoc forest. This requires deleting
+  each Tree in the forest. Note that the forest has
+  been transferred into the search order array, so
+  what is really being used to destroy the forest
+  is the search order array.
+ */
+QDocForest::~QDocForest()
+{
+    for (int i=0; i<searchOrder_.size(); ++i)
+        delete searchOrder_.at(i);
+    forest_.clear();
+    searchOrder_.clear();
+    indexSearchOrder_.clear();
+    moduleNames_.clear();
+    primaryTree_ = 0;
+}
+
+/*!
+  Initializes the forest prior to a traversal and
+  returns a pointer to the root node of the primary
+  tree. If the forest is empty, it return 0
+ */
+NamespaceNode* QDocForest::firstRoot()
+{
+    currentIndex_ = 0;
+    return (!searchOrder().isEmpty() ? searchOrder()[0]->root() : 0);
+}
+
+/*!
+  Increments the forest's current tree index. If the current
+  tree index is still within the forest, the function returns
+  the root node of the current tree. Otherwise it returns 0.
+ */
+NamespaceNode* QDocForest::nextRoot()
+{
+    ++currentIndex_;
+    return (currentIndex_ < searchOrder().size() ? searchOrder()[currentIndex_]->root() : 0);
+}
+
+/*!
+  Initializes the forest prior to a traversal and
+  returns a pointer to the primary tree. If the
+  forest is empty, it returns 0.
+ */
+Tree* QDocForest::firstTree()
+{
+    currentIndex_ = 0;
+    return (!searchOrder().isEmpty() ? searchOrder()[0] : 0);
+}
+
+/*!
+  Increments the forest's current tree index. If the current
+  tree index is still within the forest, the function returns
+  the pointer to the current tree. Otherwise it returns 0.
+ */
+Tree* QDocForest::nextTree()
+{
+    ++currentIndex_;
+    return (currentIndex_ < searchOrder().size() ? searchOrder()[currentIndex_] : 0);
+}
+
+/*!
+  \fn Tree* QDocForest::primaryTree()
+
+  Returns the pointer to the primary tree.
+ */
+
+/*!
+  If the search order array is empty, create the search order.
+  If the search order array is not empty, do nothing.
+ */
+void QDocForest::setSearchOrder()
+{
+    if (!searchOrder_.isEmpty())
+        return;
+    QString primaryName = primaryTree()->moduleName();
+    searchOrder_.clear();
+    searchOrder_.reserve(forest_.size()+1);
+    moduleNames_.reserve(forest_.size()+1);
+    searchOrder_.append(primaryTree_);
+    moduleNames_.append(primaryName);
+    QMap<QString, Tree*>::iterator i;
+    if (primaryName != "QtCore") {
+        i = forest_.find("QtCore");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtCore");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtGui") {
+        i = forest_.find("QtGui");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtGui");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtNetwork") {
+        i = forest_.find("QtNetwork");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtNetwork");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtOpenGL") {
+        i = forest_.find("QtOpenGL");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtOpenGL");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtWidgets") {
+        i = forest_.find("QtWidgets");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtWidgets");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtSql") {
+        i = forest_.find("QtSql");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtSql");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtXml") {
+        i = forest_.find("QtXml");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtXml");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtSvg") {
+        i = forest_.find("QtSvg");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtSvg");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtDoc") {
+        i = forest_.find("QtDoc");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtDoc");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtQuick") {
+        i = forest_.find("QtQuick");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtQuick");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtQml") {
+        i = forest_.find("QtQml");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtQml");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtPrintSupport") {
+        i = forest_.find("QtPrintSupport");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtPrintSupport");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtGraphicalEffects") {
+        i = forest_.find("QtGraphicalEffects");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtGraphicalEffects");
+            forest_.erase(i);
+        }
+    }
+    if (primaryName != "QtConcurrent") {
+        i = forest_.find("QtConcurrent");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("QtConcurrent");
+            forest_.erase(i);
+        }
+    }
+#if 0
+    if (primaryName != "zzz") {
+        i = forest_.find("zzz");
+        if (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append("zzz");
+            forest_.erase(i);
+        }
+    }
+#endif
+    /*
+      If any trees remain in the forest, just add them
+      to the search order sequentially, because we don't
+      know any better at this point.
+     */
+    if (!forest_.isEmpty()) {
+        i = forest_.begin();
+        while (i != forest_.end()) {
+            searchOrder_.append(i.value());
+            moduleNames_.append(i.key());
+            ++i;
+        }
+        forest_.clear();
+    }
+
+    /*
+      Rebuild the forest after constructing the search order.
+      It was destroyed during construction of the search order,
+      but it is needed for module-specific searches.
+     */
+    for (int i=0; i<searchOrder_.size(); ++i) {
+        forest_.insert(moduleNames_.at(i).toLower(), searchOrder_.at(i));
+    }
+
+#if 0
+    qDebug() << "  SEARCH ORDER:";
+    for (int i=0; i<moduleNames_.size(); ++i)
+        qDebug() << "    " << i+1 << "." << moduleNames_.at(i);
+#endif
+}
+
+/*!
+  Returns an ordered array of Tree pointers that represents
+  the order in which the trees should be searched. The first
+  Tree in the array is the tree for the current module, i.e.
+  the module for which qdoc is generating documentation.
+
+  The other Tree pointers in the array represent the index
+  files that were loaded in preparation for generating this
+  module's documentation. Each Tree pointer represents one
+  index file. The index file Tree points have been ordered
+  heuristically to, hopefully, minimize searching. Thr order
+  will probably be changed.
+
+  If the search order array is empty, this function calls
+  indexSearchOrder(). The search order array is empty while
+  the index files are being loaded, but some searches must
+  be performed during this time, notably searches for base
+  class nodes. These searches require a temporary search
+  order. The temporary order changes throughout the loading
+  of the index files, but it is always the tree for the
+  current index file first, followed by the trees for the
+  index files that have already been loaded. The only
+  ordering required in this temporary search order is that
+  the current tree must be searched first.
+ */
+const QVector<Tree*>& QDocForest::searchOrder()
+{
+    if (searchOrder_.isEmpty())
+        return indexSearchOrder();
+    return searchOrder_;
+}
+
+/*!
+  There are two search orders used by qdoc when searching for
+  things. The normal search order is returned by searchOrder(),
+  but this normal search order is not known until all the index
+  files have been read. At that point, setSearchOrder() is
+  called.
+
+  During the reading of the index files, the vector holding
+  the normal search order remains empty. Whenever the search
+  order is requested, if that vector is empty, this function
+  is called to return a temporary search order, which includes
+  all the index files that have been read so far, plus the
+  one being read now. That one is prepended to the front of
+  the vector.
+ */
+const QVector<Tree*>& QDocForest::indexSearchOrder()
+{
+    if (forest_.size() > indexSearchOrder_.size())
+        indexSearchOrder_.prepend(primaryTree_);
+    return indexSearchOrder_;
+}
+
+/*!
+  Create a new Tree for the index file for the specified
+  \a module and add it to the forest. Return the pointer
+  to its root.
+ */
+NamespaceNode* QDocForest::newIndexTree(const QString& module)
+{
+    primaryTree_ = new Tree(module, qdb_);
+    forest_.insert(module, primaryTree_);
+    return primaryTree_->root();
+}
+
+/*!
+  Create a new Tree for use as the primary tree. This tree
+  will represent the primary module.
+ */
+void QDocForest::newPrimaryTree(const QString& module)
+{
+    primaryTree_ = new Tree(module, qdb_);
+}
+
+/*!
+  Searches through the forest for a node named \a targetPath
+  and returns a pointer to it if found. The \a relative node
+  is the starting point. It only makes sense for the primary
+  tree, which is searched first. After the primary tree has
+  been searched, \a relative is set to 0 for searching the
+  other trees, which are all index trees. With relative set
+  to 0, the starting point for each index tree is the root
+  of the index tree.
+ */
+const Node* QDocForest::findNodeForTarget(QStringList& targetPath,
+                                          const Node* relative,
+                                          Node::Genus genus,
+                                          QString& ref)
+{
+    int flags = SearchBaseClasses | SearchEnumValues;
+
+    QString entity = targetPath.at(0);
+    targetPath.removeFirst();
+    QStringList entityPath = entity.split("::");
+
+    QString target;
+    if (!targetPath.isEmpty()) {
+        target = targetPath.at(0);
+        targetPath.removeFirst();
+    }
+
+    foreach (Tree* t, searchOrder()) {
+        const Node* n = t->findNodeForTarget(entityPath, target, relative, flags, genus, ref);
+        if (n)
+            return n;
+        relative = 0;
+    }
+    return 0;
+}
+
+/*!
+  This function merges all the collection maps for collection
+  nodes of node type \a t into the collection multimap \a cnmm,
+  which is cleared before starting.
+
+  This is mainly useful for groups, which often cross module
+  boundaries. It might be true that neither modules nor QML
+  modules cross module boundaries, but this function works for
+  those cases as well.
+ */
+void QDocForest::mergeCollectionMaps(Node::Type nt, CNMultiMap& cnmm)
+{
+    foreach (Tree* t, searchOrder()) {
+        const CNMap& cnm = t->getCollections(nt);
+        if (!cnm.isEmpty()) {
+            CNMap::const_iterator i = cnm.begin();
+            while (i != cnm.end()) {
+                if (!i.value()->isInternal())
+                    cnmm.insert(i.key(), i.value());
+                ++i;
+            }
+        }
+    }
+}
 
 /*! \class QDocDatabase
+  This class provides exclusive access to the qdoc database,
+  which consists of a forrest of trees and a lot of maps and
+  other useful data structures.
  */
 
 QDocDatabase* QDocDatabase::qdocDB_ = NULL;
+NodeMap QDocDatabase::typeNodeMap_;
 
 /*!
-  Constructs the singleton qdoc database object.
-  It constructs a singleton Tree object with this
-  qdoc database pointer.
+  Constructs the singleton qdoc database object. The singleton
+  constructs the \a forest_ object, which is also a singleton.
+  \a showInternal_ is normally false. If it is true, qdoc will
+  write documentation for nodes marked \c internal.
  */
-QDocDatabase::QDocDatabase() : showInternal_(false)
+QDocDatabase::QDocDatabase() : showInternal_(false), forest_(this)
 {
-    tree_ = new Tree(this);
+    // nothing
 }
 
 /*!
-  Destroys the qdoc database object. This requires deleting
-  the tree of nodes, which deletes each node.
+  Destroys the qdoc database object. This requires destroying
+  the forest object, which contains an array of tree pointers.
+  Each tree is deleted.
  */
 QDocDatabase::~QDocDatabase()
 {
-    masterMap_.clear();
-    delete tree_;
+    // nothing.
 }
 
-/*! \fn Tree* QDocDatabase::tree()
-  Returns the pointer to the tree. This function is for compatibility
-  with the current qdoc. It will be removed when the QDocDatabase class
-  replaces the current structures.
- */
-
 /*!
   Creates the singleton. Allows only one instance of the class
   to be created. Returns a pointer to the singleton.
 */
 QDocDatabase* QDocDatabase::qdocDB()
 {
-   if (!qdocDB_)
+    if (!qdocDB_) {
       qdocDB_ = new QDocDatabase;
+      initializeDB();
+    }
    return qdocDB_;
 }
 
@@ -106,36 +486,192 @@ void QDocDatabase::destroyQdocDB()
 }
 
 /*!
-  \fn const DocNodeMap& QDocDatabase::groups() const
+  Initialize data structures in the singleton qdoc database.
+
+  In particular, the type node map is initialized with a lot
+  type names that don't refer to documented types. For example,
+  the C++ standard types are included. These might be documented
+  here at some point, but for now they are not. Other examples
+  include \c array and \c data, which are just generic names
+  used as place holders in function signatures that appear in
+  the documentation.
+
+  Also calls Node::initialize() to initialize the search goal map.
+ */
+void QDocDatabase::initializeDB()
+{
+    Node::initialize();
+    typeNodeMap_.insert( "accepted", 0);
+    typeNodeMap_.insert( "actionPerformed", 0);
+    typeNodeMap_.insert( "activated", 0);
+    typeNodeMap_.insert( "alias", 0);
+    typeNodeMap_.insert( "anchors", 0);
+    typeNodeMap_.insert( "any", 0);
+    typeNodeMap_.insert( "array", 0);
+    typeNodeMap_.insert( "autoSearch", 0);
+    typeNodeMap_.insert( "axis", 0);
+    typeNodeMap_.insert( "backClicked", 0);
+    typeNodeMap_.insert( "bool", 0);
+    typeNodeMap_.insert( "boomTime", 0);
+    typeNodeMap_.insert( "border", 0);
+    typeNodeMap_.insert( "buttonClicked", 0);
+    typeNodeMap_.insert( "callback", 0);
+    typeNodeMap_.insert( "char", 0);
+    typeNodeMap_.insert( "clicked", 0);
+    typeNodeMap_.insert( "close", 0);
+    typeNodeMap_.insert( "closed", 0);
+    typeNodeMap_.insert( "color", 0);
+    typeNodeMap_.insert( "cond", 0);
+    typeNodeMap_.insert( "data", 0);
+    typeNodeMap_.insert( "dataReady", 0);
+    typeNodeMap_.insert( "dateString", 0);
+    typeNodeMap_.insert( "dateTimeString", 0);
+    typeNodeMap_.insert( "datetime", 0);
+    typeNodeMap_.insert( "day", 0);
+    typeNodeMap_.insert( "deactivated", 0);
+    typeNodeMap_.insert( "double", 0);
+    typeNodeMap_.insert( "drag", 0);
+    typeNodeMap_.insert( "easing", 0);
+    typeNodeMap_.insert( "enumeration", 0);
+    typeNodeMap_.insert( "error", 0);
+    typeNodeMap_.insert( "exposure", 0);
+    typeNodeMap_.insert( "fatalError", 0);
+    typeNodeMap_.insert( "fileSelected", 0);
+    typeNodeMap_.insert( "flags", 0);
+    typeNodeMap_.insert( "float", 0);
+    typeNodeMap_.insert( "focus", 0);
+    typeNodeMap_.insert( "focusZone", 0);
+    typeNodeMap_.insert( "format", 0);
+    typeNodeMap_.insert( "framePainted", 0);
+    typeNodeMap_.insert( "from", 0);
+    typeNodeMap_.insert( "frontClicked", 0);
+    typeNodeMap_.insert( "function", 0);
+    typeNodeMap_.insert( "hasOpened", 0);
+    typeNodeMap_.insert( "hovered", 0);
+    typeNodeMap_.insert( "hoveredTitle", 0);
+    typeNodeMap_.insert( "hoveredUrl", 0);
+    typeNodeMap_.insert( "imageCapture", 0);
+    typeNodeMap_.insert( "imageProcessing", 0);
+    typeNodeMap_.insert( "index", 0);
+    typeNodeMap_.insert( "initialized", 0);
+    typeNodeMap_.insert( "int", 0);
+    typeNodeMap_.insert( "isLoaded", 0);
+    typeNodeMap_.insert( "item", 0);
+    typeNodeMap_.insert( "jsdict", 0);
+    typeNodeMap_.insert( "jsobject", 0);
+    typeNodeMap_.insert( "key", 0);
+    typeNodeMap_.insert( "keysequence", 0);
+    typeNodeMap_.insert( "list", 0);
+    typeNodeMap_.insert( "listViewClicked", 0);
+    typeNodeMap_.insert( "loadRequest", 0);
+    typeNodeMap_.insert( "locale", 0);
+    typeNodeMap_.insert( "location", 0);
+    typeNodeMap_.insert( "long", 0);
+    typeNodeMap_.insert( "message", 0);
+    typeNodeMap_.insert( "messageReceived", 0);
+    typeNodeMap_.insert( "mode", 0);
+    typeNodeMap_.insert( "month", 0);
+    typeNodeMap_.insert( "name", 0);
+    typeNodeMap_.insert( "number", 0);
+    typeNodeMap_.insert( "object", 0);
+    typeNodeMap_.insert( "offset", 0);
+    typeNodeMap_.insert( "ok", 0);
+    typeNodeMap_.insert( "openCamera", 0);
+    typeNodeMap_.insert( "openImage", 0);
+    typeNodeMap_.insert( "openVideo", 0);
+    typeNodeMap_.insert( "padding", 0);
+    typeNodeMap_.insert( "parent", 0);
+    typeNodeMap_.insert( "path", 0);
+    typeNodeMap_.insert( "photoModeSelected", 0);
+    typeNodeMap_.insert( "position", 0);
+    typeNodeMap_.insert( "precision", 0);
+    typeNodeMap_.insert( "presetClicked", 0);
+    typeNodeMap_.insert( "preview", 0);
+    typeNodeMap_.insert( "previewSelected", 0);
+    typeNodeMap_.insert( "progress", 0);
+    typeNodeMap_.insert( "puzzleLost", 0);
+    typeNodeMap_.insert( "qmlSignal", 0);
+    typeNodeMap_.insert( "real", 0);
+    typeNodeMap_.insert( "rectangle", 0);
+    typeNodeMap_.insert( "request", 0);
+    typeNodeMap_.insert( "requestId", 0);
+    typeNodeMap_.insert( "section", 0);
+    typeNodeMap_.insert( "selected", 0);
+    typeNodeMap_.insert( "send", 0);
+    typeNodeMap_.insert( "settingsClicked", 0);
+    typeNodeMap_.insert( "shoe", 0);
+    typeNodeMap_.insert( "short", 0);
+    typeNodeMap_.insert( "signed", 0);
+    typeNodeMap_.insert( "sizeChanged", 0);
+    typeNodeMap_.insert( "size_t", 0);
+    typeNodeMap_.insert( "sockaddr", 0);
+    typeNodeMap_.insert( "someOtherSignal", 0);
+    typeNodeMap_.insert( "sourceSize", 0);
+    typeNodeMap_.insert( "startButtonClicked", 0);
+    typeNodeMap_.insert( "state", 0);
+    typeNodeMap_.insert( "std::initializer_list", 0);
+    typeNodeMap_.insert( "std::list", 0);
+    typeNodeMap_.insert( "std::map", 0);
+    typeNodeMap_.insert( "std::pair", 0);
+    typeNodeMap_.insert( "std::string", 0);
+    typeNodeMap_.insert( "std::vector", 0);
+    typeNodeMap_.insert( "string", 0);
+    typeNodeMap_.insert( "stringlist", 0);
+    typeNodeMap_.insert( "swapPlayers", 0);
+    typeNodeMap_.insert( "symbol", 0);
+    typeNodeMap_.insert( "t", 0);
+    typeNodeMap_.insert( "T", 0);
+    typeNodeMap_.insert( "tagChanged", 0);
+    typeNodeMap_.insert( "timeString", 0);
+    typeNodeMap_.insert( "timeout", 0);
+    typeNodeMap_.insert( "to", 0);
+    typeNodeMap_.insert( "toggled", 0);
+    typeNodeMap_.insert( "type", 0);
+    typeNodeMap_.insert( "unsigned", 0);
+    typeNodeMap_.insert( "urllist", 0);
+    typeNodeMap_.insert( "va_list", 0);
+    typeNodeMap_.insert( "value", 0);
+    typeNodeMap_.insert( "valueEmitted", 0);
+    typeNodeMap_.insert( "videoFramePainted", 0);
+    typeNodeMap_.insert( "videoModeSelected", 0);
+    typeNodeMap_.insert( "videoRecorder", 0);
+    typeNodeMap_.insert( "void", 0);
+    typeNodeMap_.insert( "volatile", 0);
+    typeNodeMap_.insert( "wchar_t", 0);
+    typeNodeMap_.insert( "x", 0);
+    typeNodeMap_.insert( "y", 0);
+    typeNodeMap_.insert( "zoom", 0);
+    typeNodeMap_.insert( "zoomTo", 0);
+}
+
+/*! \fn NamespaceNode* QDocDatabase::primaryTreeRoot()
+  Returns a pointer to the root node of the primary tree.
+ */
+
+/*!
+  \fn const GroupMap& QDocDatabase::groups()
   Returns a const reference to the collection of all
-  group nodes.
+  group nodes in the primary tree.
 */
 
 /*!
-  \fn const DocNodeMap& QDocDatabase::modules() const
+  \fn const ModuleMap& QDocDatabase::modules()
   Returns a const reference to the collection of all
-  module nodes.
+  module nodes in the primary tree.
 */
 
 /*!
-  \fn const DocNodeMap& QDocDatabase::qmlModules() const
+  \fn const QmlModuleMap& QDocDatabase::qmlModules()
   Returns a const reference to the collection of all
-  QML module nodes.
+  QML module nodes in the primary tree.
 */
 
-/*!
+/*! \fn GroupNode* QDocDatabase::getGroup(const QString& name)
   Find the group node named \a name and return a pointer
   to it. If a matching node is not found, return 0.
  */
-DocNode* QDocDatabase::getGroup(const QString& name)
-{
-    DocNodeMap::const_iterator i = groups_.find(name);
-    if (i != groups_.end())
-        return i.value();
-    return 0;
-}
 
-/*!
+/*! \fn GroupNode* QDocDatabase::findGroup(const QString& name)
   Find the group node named \a name and return a pointer
   to it. If a matching node is not found, add a new group
   node named \a name and return a pointer to that one.
@@ -143,20 +679,8 @@ DocNode* QDocDatabase::getGroup(const QString& name)
   If a new group node is added, its parent is the tree root,
   and the new group node is marked \e{not seen}.
  */
-DocNode* QDocDatabase::findGroup(const QString& name)
-{
-    DocNodeMap::const_iterator i = groups_.find(name);
-    if (i != groups_.end())
-        return i.value();
-    DocNode* dn = new DocNode(tree_->root(), name, Node::Group, Node::OverviewPage);
-    dn->markNotSeen();
-    groups_.insert(name,dn);
-    if (!masterMap_.contains(name,dn))
-        masterMap_.insert(name,dn);
-    return dn;
-}
 
-/*!
+/*! \fn ModuleNode* QDocDatabase::findModule(const QString& name)
   Find the module node named \a name and return a pointer
   to it. If a matching node is not found, add a new module
   node named \a name and return a pointer to that one.
@@ -164,20 +688,8 @@ DocNode* QDocDatabase::findGroup(const QString& name)
   If a new module node is added, its parent is the tree root,
   and the new module node is marked \e{not seen}.
  */
-DocNode* QDocDatabase::findModule(const QString& name)
-{
-    DocNodeMap::const_iterator i = modules_.find(name);
-    if (i != modules_.end())
-        return i.value();
-    DocNode* dn = new DocNode(tree_->root(), name, Node::Module, Node::OverviewPage);
-    dn->markNotSeen();
-    modules_.insert(name,dn);
-    if (!masterMap_.contains(name,dn))
-        masterMap_.insert(name,dn);
-    return dn;
-}
 
-/*!
+/*! \fn QmlModuleNode* QDocDatabase::findQmlModule(const QString& name)
   Find the QML module node named \a name and return a pointer
   to it. If a matching node is not found, add a new QML module
   node named \a name and return a pointer to that one.
@@ -185,68 +697,32 @@ DocNode* QDocDatabase::findModule(const QString& name)
   If a new QML module node is added, its parent is the tree root,
   and the new QML module node is marked \e{not seen}.
  */
-QmlModuleNode* QDocDatabase::findQmlModule(const QString& name)
-{
-    if (qmlModules_.contains(name))
-        return static_cast<QmlModuleNode*>(qmlModules_.value(name));
-
-    QmlModuleNode* qmn = new QmlModuleNode(tree_->root(), name);
-    qmn->markNotSeen();
-    qmn->setQmlModuleInfo(name);
-    qmlModules_.insert(name, qmn);
-    masterMap_.insert(name, qmn);
-    return qmn;
-}
 
-/*!
-  Looks up the group node named \a name in the collection
-  of all group nodes. If a match is found, a pointer to the
-  node is returned. Otherwise, a new group node named \a name
-  is created and inserted into the collection, and the pointer
-  to that node is returned. The group node is marked \e{seen}
-  in either case.
+/*! \fn GroupNode* QDocDatabase::addGroup(const QString& name)
+  Looks up the group named \a name in the primary tree. If
+  a match is found, a pointer to the node is returned.
+  Otherwise, a new group node named \a name is created and
+  inserted into the collection, and the pointer to that node
+  is returned.
  */
-DocNode* QDocDatabase::addGroup(const QString& name)
-{
-    DocNode* group = findGroup(name);
-    group->markSeen();
-    return group;
-}
 
-/*!
-  Looks up the module node named \a name in the collection
-  of all module nodes. If a match is found, a pointer to the
-  node is returned. Otherwise, a new module node named \a name
-  is created and inserted into the collection, and the pointer
-  to that node is returned. The module node is marked \e{seen}
-  in either case.
+/*! \fn ModuleNode* QDocDatabase::addModule(const QString& name)
+  Looks up the module named \a name in the primary tree. If
+  a match is found, a pointer to the node is returned.
+  Otherwise, a new module node named \a name is created and
+  inserted into the collection, and the pointer to that node
+  is returned.
  */
-DocNode* QDocDatabase::addModule(const QString& name)
-{
-    DocNode* module = findModule(name);
-    module->markSeen();
-    return module;
-}
 
-/*!
-  Looks up the QML module node named \a name in the collection
-  of all QML module nodes. If a match is found, a pointer to the
-  node is returned. Otherwise, a new QML module node named \a name
-  is created and inserted into the collection, and the pointer
-  to that node is returned. The QML module node is marked \e{seen}
-  in either case.
- */
-QmlModuleNode* QDocDatabase::addQmlModule(const QString& name)
-{
-    QStringList blankSplit = name.split(QLatin1Char(' '));
-    QmlModuleNode* qmn = findQmlModule(blankSplit[0]);
-    qmn->setQmlModuleInfo(name);
-    qmn->markSeen();
-    //masterMap_.insert(qmn->qmlModuleIdentifier(),qmn);
-    return qmn;
-}
+/*! \fn QmlModuleNode* QDocDatabase::addQmlModule(const QString& name)
+  Looks up the QML module named \a name in the primary tree.
+  If a match is found, a pointer to the node is returned.
+  Otherwise, a new QML module node named \a name is created
+  and inserted into the collection, and the pointer to that
+  node is returned.
+ */
 
-/*!
+/*! \fn GroupNode* QDocDatabase::addToGroup(const QString& name, Node* node)
   Looks up the group node named \a name in the collection
   of all group nodes. If a match is not found, a new group
   node named \a name is created and inserted into the collection.
@@ -255,62 +731,31 @@ QmlModuleNode* QDocDatabase::addQmlModule(const QString& name)
   \a node is not changed by this function. Returns a pointer to
   the group node.
  */
-DocNode* QDocDatabase::addToGroup(const QString& name, Node* node)
-{
-    DocNode* dn = findGroup(name);
-    dn->addMember(node);
-    node->addMember(dn);
-    return dn;
-}
 
-/*!
+/*! \fn ModuleNode* QDocDatabase::addToModule(const QString& name, Node* node)
   Looks up the module node named \a name in the collection
   of all module nodes. If a match is not found, a new module
   node named \a name is created and inserted into the collection.
   Then append \a node to the module's members list. The parent of
   \a node is not changed by this function. Returns the module node.
  */
-DocNode* QDocDatabase::addToModule(const QString& name, Node* node)
-{
-    DocNode* dn = findModule(name);
-    dn->addMember(node);
-    node->setModuleName(name);
-    return dn;
-}
 
-/*!
+/*! \fn QmlModuleNode* QDocDatabase::addToQmlModule(const QString& name, Node* node)
   Looks up the QML module named \a name. If it isn't there,
   create it. Then append \a node to the QML module's member
   list. The parent of \a node is not changed by this function.
  */
-void QDocDatabase::addToQmlModule(const QString& name, Node* node)
-{
-    QStringList qmid;
-    QStringList dotSplit;
-    QStringList blankSplit = name.split(QLatin1Char(' '));
-    qmid.append(blankSplit[0]);
-    if (blankSplit.size() > 1) {
-        qmid.append(blankSplit[0] + blankSplit[1]);
-        dotSplit = blankSplit[1].split(QLatin1Char('.'));
-        qmid.append(blankSplit[0] + dotSplit[0]);
-    }
 
-    QmlModuleNode* qmn = findQmlModule(blankSplit[0]);
-    qmn->addMember(node);
-    node->setQmlModule(qmn);
-
-    if (node->subType() == Node::QmlClass) {
-        QmlClassNode* n = static_cast<QmlClassNode*>(node);
-        for (int i=0; i<qmid.size(); ++i) {
-            QString key = qmid[i] + "::" + node->name();
-            if (!qmlTypeMap_.contains(key))
-                qmlTypeMap_.insert(key,n);
-            if (!masterMap_.contains(key))
-                masterMap_.insert(key,node);
-        }
-        if (!masterMap_.contains(node->name(),node))
-            masterMap_.insert(node->name(),node);
-    }
+/*!
+  Looks up the QML type node identified by the qualified Qml
+  type \a name and returns a pointer to the QML type node.
+ */
+QmlClassNode* QDocDatabase::findQmlType(const QString& name)
+{
+    QmlClassNode* qcn = forest_.lookupQmlType(name);
+    if (qcn)
+        return qcn;
+    return 0;
 }
 
 /*!
@@ -321,22 +766,19 @@ void QDocDatabase::addToQmlModule(const QString& name, Node* node)
   If the QML module id is empty, it looks up the QML type by
   \a name only.
  */
-QmlClassNode* QDocDatabase::findQmlType(const QString& qmid, const QString& name) const
+QmlClassNode* QDocDatabase::findQmlType(const QString& qmid, const QString& name)
 {
-    if (!qmid.isEmpty())
-        return qmlTypeMap_.value(qmid + "::" + name);
+    if (!qmid.isEmpty()) {
+        QString t = qmid + "::" + name;
+        QmlClassNode* qcn = forest_.lookupQmlType(t);
+        if (qcn)
+            return qcn;
+    }
 
     QStringList path(name);
-    Node* n = tree_->findNodeByNameAndType(path, Node::Document, Node::QmlClass, 0, true);
-    if (n) {
-        if (n->subType() == Node::QmlClass)
-            return static_cast<QmlClassNode*>(n);
-        else if (n->subType() == Node::Collision) {
-            NameCollisionNode* ncn;
-            ncn = static_cast<NameCollisionNode*>(n);
-            return static_cast<QmlClassNode*>(ncn->findAny(Node::Document,Node::QmlClass));
-        }
-    }
+    Node* n = forest_.findNodeByNameAndType(path, Node::QmlType);
+    if (n && n->isQmlType())
+        return static_cast<QmlClassNode*>(n);
     return 0;
 }
 
@@ -346,7 +788,7 @@ QmlClassNode* QDocDatabase::findQmlType(const QString& qmid, const QString& name
   QML type \a name and returns a pointer to the QML type node.
   If a QML type node is not found, 0 is returned.
  */
-QmlClassNode* QDocDatabase::findQmlType(const ImportRec& import, const QString& name) const
+QmlClassNode* QDocDatabase::findQmlType(const ImportRec& import, const QString& name)
 {
     if (!import.isEmpty()) {
         QStringList dotSplit;
@@ -358,7 +800,7 @@ QmlClassNode* QDocDatabase::findQmlType(const ImportRec& import, const QString&
             qmName = import.importUri_;
         for (int i=0; i<dotSplit.size(); ++i) {
             QString qualifiedName = qmName + "::" + dotSplit[i];
-            QmlClassNode* qcn = qmlTypeMap_.value(qualifiedName);
+            QmlClassNode* qcn = forest_.lookupQmlType(qualifiedName);
             if (qcn)
                 return qcn;
         }
@@ -367,59 +809,169 @@ QmlClassNode* QDocDatabase::findQmlType(const ImportRec& import, const QString&
 }
 
 /*!
-  For debugging only.
+  This function calls \a func for each tree in the forest.
  */
-void QDocDatabase::printModules() const
+void QDocDatabase::processForest(void (QDocDatabase::*func) (InnerNode*))
 {
-    DocNodeMap::const_iterator i = modules_.begin();
-    while (i != modules_.end()) {
-        qDebug() << "  " << i.key();
-        ++i;
+    Tree* t = forest_.firstTree();
+    while (t) {
+        (this->*(func))(t->root());
+        t = forest_.nextTree();
     }
 }
 
 /*!
-  For debugging only.
+  Constructs the collection of legalese texts, if it has not
+  already been constructed and returns a reference to it.
  */
-void QDocDatabase::printQmlModules() const
+TextToNodeMap& QDocDatabase::getLegaleseTexts()
 {
-    DocNodeMap::const_iterator i = qmlModules_.begin();
-    while (i != qmlModules_.end()) {
-        qDebug() << "  " << i.key();
-        ++i;
-    }
+    if (legaleseTexts_.isEmpty())
+        processForest(&QDocDatabase::findAllLegaleseTexts);
+    return legaleseTexts_;
 }
 
 /*!
-  Traverses the database to construct useful data structures
-  for use when outputting certain significant collections of
-  things, C++ classes, QML types, "since" lists, and other
-  stuff.
+  Construct the data structures for obsolete things, if they
+  have not already been constructed. Returns a reference to
+  the map of C++ classes with obsolete members.
  */
-void QDocDatabase::buildCollections()
+NodeMap& QDocDatabase::getClassesWithObsoleteMembers()
 {
-    nonCompatClasses_.clear();
-    mainClasses_.clear();
-    compatClasses_.clear();
-    obsoleteClasses_.clear();
-    funcIndex_.clear();
-    legaleseTexts_.clear();
-    serviceClasses_.clear();
-    qmlClasses_.clear();
-
-    findAllClasses(treeRoot());
-    findAllFunctions(treeRoot());
-    findAllLegaleseTexts(treeRoot());
-    findAllNamespaces(treeRoot());
-    findAllSince(treeRoot());
-    findAllObsoleteThings(treeRoot());
+    if (obsoleteClasses_.isEmpty() && obsoleteQmlTypes_.isEmpty())
+        processForest(&QDocDatabase::findAllObsoleteThings);
+    return classesWithObsoleteMembers_;
+}
+
+/*!
+  Construct the data structures for obsolete things, if they
+  have not already been constructed. Returns a reference to
+  the map of obsolete QML types.
+ */
+NodeMap& QDocDatabase::getObsoleteQmlTypes()
+{
+    if (obsoleteClasses_.isEmpty() && obsoleteQmlTypes_.isEmpty())
+        processForest(&QDocDatabase::findAllObsoleteThings);
+    return obsoleteQmlTypes_;
+}
+
+/*!
+  Construct the data structures for obsolete things, if they
+  have not already been constructed. Returns a reference to
+  the map of QML types with obsolete members.
+ */
+NodeMap& QDocDatabase::getQmlTypesWithObsoleteMembers()
+{
+    if (obsoleteClasses_.isEmpty() && obsoleteQmlTypes_.isEmpty())
+        processForest(&QDocDatabase::findAllObsoleteThings);
+    return qmlTypesWithObsoleteMembers_;
+}
+
+/*!
+  Constructs the C++ namespace data structure, if it has not
+  already been constructed. Returns a reference to it.
+ */
+NodeMap& QDocDatabase::getNamespaces()
+{
+    if (namespaceIndex_.isEmpty())
+        processForest(&QDocDatabase::findAllNamespaces);
+    return namespaceIndex_;
+}
+
+/*!
+  Construct the C++ class data structures, if they have not
+  already been constructed. Returns a reference to the map
+  of C++ service clases.
+
+  \note This is currently not used.
+ */
+NodeMap& QDocDatabase::getServiceClasses()
+{
+    if (nonCompatClasses_.isEmpty() && qmlClasses_.isEmpty())
+        processForest(&QDocDatabase::findAllClasses);
+    return serviceClasses_;
+}
+
+/*!
+  Construct the data structures for QML basic types, if they
+  have not already been constructed. Returns a reference to
+  the map of QML basic types.
+ */
+NodeMap& QDocDatabase::getQmlBasicTypes()
+{
+    if (nonCompatClasses_.isEmpty() && qmlBasicTypes_.isEmpty())
+        processForest(&QDocDatabase::findAllClasses);
+    return qmlBasicTypes_;
+}
+
+/*!
+  Construct the data structures for obsolete things, if they
+  have not already been constructed. Returns a reference to
+  the map of obsolete QML types.
+ */
+NodeMap& QDocDatabase::getQmlTypes()
+{
+    if (nonCompatClasses_.isEmpty() && qmlClasses_.isEmpty())
+        processForest(&QDocDatabase::findAllClasses);
+    return qmlClasses_;
+}
+
+/*!
+  Construct the data structures for obsolete things, if they
+  have not already been constructed. Returns a reference to
+  the map of obsolete C++ clases.
+ */
+NodeMap& QDocDatabase::getObsoleteClasses()
+{
+    if (obsoleteClasses_.isEmpty() && obsoleteQmlTypes_.isEmpty())
+        processForest(&QDocDatabase::findAllObsoleteThings);
+    return obsoleteClasses_;
+}
+
+/*!
+  Construct the C++ class data structures, if they have not
+  already been constructed. Returns a reference to the map
+  of compatibility C++ clases.
+ */
+NodeMap& QDocDatabase::getCompatibilityClasses()
+{
+    if (nonCompatClasses_.isEmpty() && qmlClasses_.isEmpty())
+        processForest(&QDocDatabase::findAllClasses);
+    return compatClasses_;
+}
+
+/*!
+  Construct the C++ class data structures, if they have not
+  already been constructed. Returns a reference to the map
+  of main C++ clases.
+
+  \note The main C++ classes data structure is currently not
+  used.
+ */
+NodeMap& QDocDatabase::getMainClasses()
+{
+    if (nonCompatClasses_.isEmpty() && qmlClasses_.isEmpty())
+        processForest(&QDocDatabase::findAllClasses);
+    return mainClasses_;
+}
+
+/*!
+  Construct the C++ class data structures, if they have not
+  already been constructed. Returns a reference to the map
+  of all C++ classes.
+ */
+NodeMap& QDocDatabase::getCppClasses()
+{
+    if (nonCompatClasses_.isEmpty() && qmlClasses_.isEmpty())
+        processForest(&QDocDatabase::findAllClasses);
+    return nonCompatClasses_;
 }
 
 /*!
   Finds all the C++ class nodes and QML type nodes and
   sorts them into maps.
  */
-void QDocDatabase::findAllClasses(const InnerNode* node)
+void QDocDatabase::findAllClasses(InnerNode* node)
 {
     NodeList::const_iterator c = node->childNodes().constBegin();
     while (c != node->childNodes().constEnd()) {
@@ -445,14 +997,16 @@ void QDocDatabase::findAllClasses(const InnerNode* node)
                     serviceClasses_.insert(serviceName, *c);
                 }
             }
-            else if ((*c)->type() == Node::Document &&
-                     (*c)->subType() == Node::QmlClass &&
-                     !(*c)->doc().isEmpty()) {
+            else if (((*c)->isQmlType() || (*c)->isQmlBasicType())&& !(*c)->doc().isEmpty()) {
                 QString qmlTypeName = (*c)->name();
                 if (qmlTypeName.startsWith(QLatin1String("QML:")))
                     qmlClasses_.insert(qmlTypeName.mid(4),*c);
                 else
                     qmlClasses_.insert(qmlTypeName,*c);
+
+                //also add to the QML basic type map
+                if ((*c)->isQmlBasicType())
+                    qmlBasicTypes_.insert(qmlTypeName,*c);
             }
             else if ((*c)->isInnerNode()) {
                 findAllClasses(static_cast<InnerNode*>(*c));
@@ -463,15 +1017,26 @@ void QDocDatabase::findAllClasses(const InnerNode* node)
 }
 
 /*!
+  Construct the function index data structure and return it.
+  This data structure is used to output the function index page.
+ */
+NodeMapMap& QDocDatabase::getFunctionIndex()
+{
+    funcIndex_.clear();
+    processForest(&QDocDatabase::findAllFunctions);
+    return funcIndex_;
+}
+
+/*!
   Finds all the function nodes
  */
-void QDocDatabase::findAllFunctions(const InnerNode* node)
+void QDocDatabase::findAllFunctions(InnerNode* node)
 {
     NodeList::ConstIterator c = node->childNodes().constBegin();
     while (c != node->childNodes().constEnd()) {
         if ((*c)->access() != Node::Private) {
             if ((*c)->isInnerNode()) {
-                findAllFunctions(static_cast<const InnerNode*>(*c));
+                findAllFunctions(static_cast<InnerNode*>(*c));
             }
             else if ((*c)->type() == Node::Function) {
                 const FunctionNode* func = static_cast<const FunctionNode*>(*c);
@@ -491,7 +1056,7 @@ void QDocDatabase::findAllFunctions(const InnerNode* node)
   Finds all the nodes containing legalese text and puts them
   in a map.
  */
-void QDocDatabase::findAllLegaleseTexts(const InnerNode* node)
+void QDocDatabase::findAllLegaleseTexts(InnerNode* node)
 {
     NodeList::ConstIterator c = node->childNodes().constBegin();
     while (c != node->childNodes().constEnd()) {
@@ -499,7 +1064,7 @@ void QDocDatabase::findAllLegaleseTexts(const InnerNode* node)
             if (!(*c)->doc().legaleseText().isEmpty())
                 legaleseTexts_.insertMulti((*c)->doc().legaleseText(), *c);
             if ((*c)->isInnerNode())
-                findAllLegaleseTexts(static_cast<const InnerNode *>(*c));
+                findAllLegaleseTexts(static_cast<InnerNode *>(*c));
         }
         ++c;
     }
@@ -508,13 +1073,13 @@ void QDocDatabase::findAllLegaleseTexts(const InnerNode* node)
 /*!
   Finds all the namespace nodes and puts them in an index.
  */
-void QDocDatabase::findAllNamespaces(const InnerNode* node)
+void QDocDatabase::findAllNamespaces(InnerNode* node)
 {
     NodeList::ConstIterator c = node->childNodes().constBegin();
     while (c != node->childNodes().constEnd()) {
         if ((*c)->access() != Node::Private) {
             if ((*c)->isInnerNode()) {
-                findAllNamespaces(static_cast<const InnerNode *>(*c));
+                findAllNamespaces(static_cast<InnerNode *>(*c));
                 if ((*c)->type() == Node::Namespace) {
                     // Ensure that the namespace's name is not empty (the root
                     // namespace has no name).
@@ -532,7 +1097,7 @@ void QDocDatabase::findAllNamespaces(const InnerNode* node)
   maps. They can be C++ classes, QML types, or they can be
   functions, enum types, typedefs, methods, etc.
  */
-void QDocDatabase::findAllObsoleteThings(const InnerNode* node)
+void QDocDatabase::findAllObsoleteThings(InnerNode* node)
 {
     NodeList::const_iterator c = node->childNodes().constBegin();
     while (c != node->childNodes().constEnd()) {
@@ -545,7 +1110,7 @@ void QDocDatabase::findAllObsoleteThings(const InnerNode* node)
                         name = (*c)->parent()->name() + "::" + name;
                     obsoleteClasses_.insert(name, *c);
                 }
-                else if ((*c)->type() == Node::Document && (*c)->subType() == Node::QmlClass) {
+                else if ((*c)->isQmlType()) {
                     if (name.startsWith(QLatin1String("QML:")))
                         name = name.mid(4);
                     name = (*c)->qmlModuleName() + "::" + name;
@@ -581,7 +1146,7 @@ void QDocDatabase::findAllObsoleteThings(const InnerNode* node)
                     ++p;
                 }
             }
-            else if ((*c)->type() == Node::Document && (*c)->subType() == Node::QmlClass) {
+            else if ((*c)->isQmlType()) {
                 InnerNode* n = static_cast<InnerNode*>(*c);
                 bool inserted = false;
                 NodeList::const_iterator p = n->childNodes().constBegin();
@@ -596,7 +1161,7 @@ void QDocDatabase::findAllObsoleteThings(const InnerNode* node)
                                 Node* parent = (*c)->parent();
                                 if (parent->type() == Node::QmlPropertyGroup && parent->parent())
                                     parent = parent->parent();
-                                if (parent && parent->subType() == Node::QmlClass && !parent->name().isEmpty())
+                                if (parent && parent->isQmlType() && !parent->name().isEmpty())
                                     name = parent->name() + "::" + name;
                             }
                             qmlTypesWithObsoleteMembers_.insert(name,*c);
@@ -627,7 +1192,7 @@ void QDocDatabase::findAllObsoleteThings(const InnerNode* node)
   This function is used for generating the "New Classes... in x.y"
   section on the \e{What's New in Qt x.y} page.
  */
-void QDocDatabase::findAllSince(const InnerNode* node)
+void QDocDatabase::findAllSince(InnerNode* node)
 {
     NodeList::const_iterator child = node->childNodes().constBegin();
     while (child != node->childNodes().constEnd()) {
@@ -665,7 +1230,7 @@ void QDocDatabase::findAllSince(const InnerNode* node)
                     nsmap.value().insert(className,(*child));
                     ncmap.value().insert(className,(*child));
                 }
-                else if ((*child)->subType() == Node::QmlClass) {
+                else if ((*child)->isQmlType()) {
                     // Insert QML elements into the since and element maps.
                     QString className = (*child)->name();
                     if ((*child)->parent() && !(*child)->parent()->name().isEmpty()) {
@@ -702,8 +1267,10 @@ void QDocDatabase::findAllSince(const InnerNode* node)
   reference to the value, which is a NodeMap. If \a key is not
   found, return a reference to an empty NodeMap.
  */
-const NodeMap& QDocDatabase::getClassMap(const QString& key) const
+const NodeMap& QDocDatabase::getClassMap(const QString& key)
 {
+    if (newSinceMaps_.isEmpty() && newClassMaps_.isEmpty() && newQmlTypeMaps_.isEmpty())
+        processForest(&QDocDatabase::findAllSince);
     NodeMapMap::const_iterator i = newClassMaps_.constFind(key);
     if (i != newClassMaps_.constEnd())
         return i.value();
@@ -715,8 +1282,10 @@ const NodeMap& QDocDatabase::getClassMap(const QString& key) const
   reference to the value, which is a NodeMap. If the \a key is not
   found, return a reference to an empty NodeMap.
  */
-const NodeMap& QDocDatabase::getQmlTypeMap(const QString& key) const
+const NodeMap& QDocDatabase::getQmlTypeMap(const QString& key)
 {
+    if (newSinceMaps_.isEmpty() && newClassMaps_.isEmpty() && newQmlTypeMaps_.isEmpty())
+        processForest(&QDocDatabase::findAllSince);
     NodeMapMap::const_iterator i = newQmlTypeMaps_.constFind(key);
     if (i != newQmlTypeMaps_.constEnd())
         return i.value();
@@ -728,8 +1297,10 @@ const NodeMap& QDocDatabase::getQmlTypeMap(const QString& key) const
   a reference to the value, which is a NodeMultiMap. If \a key
   is not found, return a reference to an empty NodeMultiMap.
  */
-const NodeMultiMap& QDocDatabase::getSinceMap(const QString& key) const
+const NodeMultiMap& QDocDatabase::getSinceMap(const QString& key)
 {
+    if (newSinceMaps_.isEmpty() && newClassMaps_.isEmpty() && newQmlTypeMaps_.isEmpty())
+        processForest(&QDocDatabase::findAllSince);
     NodeMultiMapMap::const_iterator i = newSinceMaps_.constFind(key);
     if (i != newSinceMaps_.constEnd())
         return i.value();
@@ -742,48 +1313,37 @@ const NodeMultiMap& QDocDatabase::getSinceMap(const QString& key) const
   to generating documentation.
  */
 void QDocDatabase::resolveIssues() {
-    resolveQmlInheritance(treeRoot());
-    resolveTargets(treeRoot());
-    tree_->resolveCppToQmlLinks();
+    resolveQmlInheritance(primaryTreeRoot());
+    resolveTargets();
+    primaryTree()->resolveCppToQmlLinks();
 }
 
 /*!
-  Searches the \a database for a node named \a target and returns
-  a pointer to it if found.
+  This function is called for autolinking to a \a type,
+  which could be a function return type or a parameter
+  type. The tree node that represents the \a type is
+  returned. All the trees are searched until a match is
+  found. When searching the primary tree, the search
+  begins at \a relative and proceeds up the parent chain.
+  When searching the index trees, the search begins at the
+  root.
  */
-const Node* QDocDatabase::resolveTarget(const QString& target,
-                                        const Node* relative,
-                                        const Node* self)
+const Node* QDocDatabase::findTypeNode(const QString& type, const Node* relative)
 {
-    const Node* node = 0;
-    if (target.endsWith("()")) {
-        QString funcName = target;
-        funcName.chop(2);
-        QStringList path = funcName.split("::");
-        const FunctionNode* fn = tree_->findFunctionNode(path, relative, SearchBaseClasses);
-        if (fn) {
-            /*
-              Why is this case not accepted?
-             */
-            if (fn->metaness() != FunctionNode::MacroWithoutParams)
-                node = fn;
-        }
-    }
-    else if (target.contains(QLatin1Char('#'))) {
-        // This error message is never printed; I think we can remove the case.
-        qDebug() << "qdoc: target case not handled:" << target;
+    QStringList path = type.split("::");
+    if ((path.size() == 1) && (path.at(0)[0].isLower() || path.at(0) == QString("T"))) {
+        NodeMap::iterator i = typeNodeMap_.find(path.at(0));
+        if (i != typeNodeMap_.end())
+            return i.value();
     }
-    else {
-        QStringList path = target.split("::");
-        int flags = SearchBaseClasses | SearchEnumValues | NonFunction;
-        node = tree_->findNode(path, relative, flags, self);
-    }
-    return node;
+    return forest_.findTypeNode(path, relative);
 }
 
 /*!
   Finds the node that will generate the documentation that
   contains the \a target and returns a pointer to it.
+
+  Can this be improved by using the target map in Tree?
  */
 const Node* QDocDatabase::findNodeForTarget(const QString& target, const Node* relative)
 {
@@ -791,157 +1351,19 @@ const Node* QDocDatabase::findNodeForTarget(const QString& target, const Node* r
     if (target.isEmpty())
         node = relative;
     else if (target.endsWith(".html"))
-        node = tree_->root()->findChildNodeByNameAndType(target, Node::Document);
+        node = findNodeByNameAndType(QStringList(target), Node::Document);
     else {
-        node = resolveTarget(target, relative);
-        if (!node)
-            node = findDocNodeByTitle(target, relative);
-    }
-    return node;
-}
-
-/*!
-  Inserts a new target into the target table with the specified
-  \a name, \a node, and \a priority.
- */
-void QDocDatabase::insertTarget(const QString& name, TargetRec::Type type, Node* node, int priority)
-{
-    TargetRec target;
-    target.type_ = type;
-    target.node_ = node;
-    target.priority_ = priority;
-    Atom a = Atom(Atom::Target, name);
-    target.ref_ = refForAtom(&a);
-    targetRecMultiMap_.insert(name, target);
-}
-
-/*!
-  This function searches for a \a target anchor node. If it
-  finds one, it sets \a ref and returns the found node.
- */
-const Node*
-QDocDatabase::findUnambiguousTarget(const QString& target, QString& ref, const Node* relative)
-{
-    TargetRec bestTarget;
-    int numBestTargets = 0;
-    QList<TargetRec> bestTargetList;
-
-    QString key = Doc::canonicalTitle(target);
-    TargetRecMultiMap::iterator i = targetRecMultiMap_.find(key);
-    while (i != targetRecMultiMap_.end()) {
-        if (i.key() != key)
-            break;
-        const TargetRec& candidate = i.value();
-        if (candidate.priority_ < bestTarget.priority_) {
-            bestTarget = candidate;
-            bestTargetList.clear();
-            bestTargetList.append(candidate);
-            numBestTargets = 1;
-        } else if (candidate.priority_ == bestTarget.priority_) {
-            bestTargetList.append(candidate);
-            ++numBestTargets;
-        }
-        ++i;
-    }
-    if (numBestTargets > 0) {
-        if (numBestTargets == 1) {
-            ref = bestTarget.ref_;
-            return bestTarget.node_;
-        }
-        else if (bestTargetList.size() > 1) {
-            if (relative && !relative->qmlModuleName().isEmpty()) {
-                for (int i=0; i<bestTargetList.size(); ++i) {
-                    const Node* n = bestTargetList.at(i).node_;
-                    if (n && relative->qmlModuleName() == n->qmlModuleName()) {
-                        ref = bestTargetList.at(i).ref_;
-                        return n;
-                    }
-                }
-            }
-        }
-    }
-    ref.clear();
-    return 0;
-}
-
-/*!
-  This function searches for a node with the specified \a title.
-  If \a relative node is provided, it is used to disambiguate if
-  it has a QML module identifier.
- */
-const DocNode* QDocDatabase::findDocNodeByTitle(const QString& title, const Node* relative) const
-{
-    QString key = Doc::canonicalTitle(title);
-    DocNodeMultiMap::const_iterator i = docNodesByTitle_.constFind(key);
-    if (i != docNodesByTitle_.constEnd()) {
-        if (relative && !relative->qmlModuleName().isEmpty()) {
-            const DocNode* dn = i.value();
-            InnerNode* parent = dn->parent();
-            if (parent && parent->type() == Node::Document && parent->subType() == Node::Collision) {
-                const NodeList& nl = parent->childNodes();
-                NodeList::ConstIterator it = nl.constBegin();
-                while (it != nl.constEnd()) {
-                    if ((*it)->qmlModuleName() == relative->qmlModuleName()) {
-                        /*
-                          By returning here, we avoid printing
-                          all the duplicate header warnings,
-                          which are not really duplicates now,
-                          because of the QML module name being
-                          used as a namespace qualifier.
-                        */
-                        dn = static_cast<const DocNode*>(*it);
-                        return dn;
-                    }
-                    ++it;
-                }
-            }
-        }
-        /*
-          Reporting all these duplicate section titles is probably
-          overkill. We should report the duplicate file and let
-          that suffice.
-        */
-        DocNodeMultiMap::const_iterator j = i;
-        ++j;
-        if (j != docNodesByTitle_.constEnd() && j.key() == i.key()) {
-            QList<Location> internalLocations;
-            while (j != docNodesByTitle_.constEnd()) {
-                if (j.key() == i.key() && j.value()->url().isEmpty()) {
-                    internalLocations.append(j.value()->location());
-                    break; // Just report one duplicate for now.
-                }
-                ++j;
-            }
-            if (internalLocations.size() > 0) {
-                i.value()->location().warning(tr("This page title exists in more than one file: \"%1\"").arg(title));
-                foreach (const Location &location, internalLocations)
-                    location.warning(tr("[It also exists here]"));
-            }
+        QStringList path = target.split("::");
+        int flags = SearchBaseClasses | SearchEnumValues; // | NonFunction;
+        foreach (Tree* t, searchOrder()) {
+            const Node* n = t->findNode(path, relative, flags, Node::DontCare);
+            if (n)
+                return n;
+            relative = 0;
         }
-        return i.value();
-    }
-    return 0;
-}
-
-/*!
-  This function searches for a node with a canonical title
-  constructed from \a target. If the node it finds is \a node,
-  it returns the ref from that node. Otherwise it returns an
-  empty string.
- */
-QString QDocDatabase::findTarget(const QString& target, const Node* node) const
-{
-    QString key = Doc::canonicalTitle(target);
-    TargetRecMultiMap::const_iterator i = targetRecMultiMap_.constFind(key);
-
-    if (i != targetRecMultiMap_.constEnd()) {
-        do {
-            if (i.value().node_ == node)
-                return i.value().ref_;
-            ++i;
-        } while (i != targetRecMultiMap_.constEnd() && i.key() == key);
+        node = findDocNodeByTitle(target);
     }
-    return QString();
+    return node;
 }
 
 /*!
@@ -953,111 +1375,40 @@ QString QDocDatabase::findTarget(const QString& target, const Node* node) const
  */
 void QDocDatabase::resolveQmlInheritance(InnerNode* root)
 {
-    // Dop we need recursion?
+    NodeMap previousSearches;
+    // Do we need recursion?
     foreach (Node* child, root->childNodes()) {
-        if (child->type() == Node::Document && child->subType() == Node::QmlClass) {
+        if (child->isQmlType()) {
             QmlClassNode* qcn = static_cast<QmlClassNode*>(child);
-            if ((qcn->qmlBaseNode() == 0) && !qcn->qmlBaseName().isEmpty()) {
-                QmlClassNode* bqcn = 0;
-                if (qcn->qmlBaseName().contains("::")) {
-                    bqcn =  qmlTypeMap_.value(qcn->qmlBaseName());
-                }
-                else {
-                    const ImportList& imports = qcn->importList();
-                    for (int i=0; i<imports.size(); ++i) {
-                        bqcn = findQmlType(imports[i], qcn->qmlBaseName());
-                        if (bqcn)
-                            break;
-                    }
-                }
-                if (bqcn == 0) {
-                    bqcn = findQmlType(QString(), qcn->qmlBaseName());
-                }
-                if (bqcn) {
+            if (qcn->qmlBaseNodeNotSet() && !qcn->qmlBaseName().isEmpty()) {
+                QmlClassNode* bqcn = static_cast<QmlClassNode*>(previousSearches.value(qcn->qmlBaseName()));
+                if (bqcn)
                     qcn->setQmlBaseNode(bqcn);
-                }
-#if 0
                 else {
-                    qDebug() << "Temporary error message (ignore): UNABLE to resolve QML base type:"
-                             << qcn->qmlBaseName() << "for QML type:" << qcn->name();
-                }
-#endif
-            }
-        }
-    }
-}
-
-/*!
- */
-void QDocDatabase::resolveTargets(InnerNode* root)
-{
-    // need recursion
-
-    foreach (Node* child, root->childNodes()) {
-        if (child->type() == Node::Document) {
-            DocNode* node = static_cast<DocNode*>(child);
-            if (!node->title().isEmpty()) {
-                QString key = Doc::canonicalTitle(node->title());
-                QList<DocNode*> nodes = docNodesByTitle_.values(key);
-                bool alreadyThere = false;
-                if (!nodes.empty()) {
-                    for (int i=0; i< nodes.size(); ++i) {
-                        if (nodes[i]->subType() == Node::ExternalPage) {
-                            if (node->name() == nodes[i]->name()) {
-                                alreadyThere = true;
+                    if (!qcn->importList().isEmpty()) {
+                        const ImportList& imports = qcn->importList();
+                        for (int i=0; i<imports.size(); ++i) {
+                            bqcn = findQmlType(imports[i], qcn->qmlBaseName());
+                            if (bqcn)
                                 break;
-                            }
                         }
                     }
-                }
-                if (!alreadyThere) {
-                    docNodesByTitle_.insert(key, node);
-                }
-            }
-            if (node->subType() == Node::Collision) {
-                resolveTargets(node);
-            }
-        }
-
-        if (child->doc().hasTableOfContents()) {
-            const QList<Atom*>& toc = child->doc().tableOfContents();
-            TargetRec target;
-            target.node_ = child;
-            target.priority_ = 3;
-
-            for (int i = 0; i < toc.size(); ++i) {
-                target.ref_ = refForAtom(toc.at(i));
-                QString title = Text::sectionHeading(toc.at(i)).toString();
-                if (!title.isEmpty()) {
-                    QString key = Doc::canonicalTitle(title);
-                    targetRecMultiMap_.insert(key, target);
+                    if (bqcn == 0) {
+                        bqcn = findQmlType(QString(), qcn->qmlBaseName());
+                    }
+                    if (bqcn) {
+                        qcn->setQmlBaseNode(bqcn);
+                        previousSearches.insert(qcn->qmlBaseName(), bqcn);
+                    }
+#if 0
+                    else {
+                        qDebug() << "Temporary error message (ignore): UNABLE to resolve QML base type:"
+                                 << qcn->qmlBaseName() << "for QML type:" << qcn->name();
+                    }
+#endif
                 }
             }
         }
-        if (child->doc().hasKeywords()) {
-            const QList<Atom*>& keywords = child->doc().keywords();
-            TargetRec target;
-            target.node_ = child;
-            target.priority_ = 1;
-
-            for (int i = 0; i < keywords.size(); ++i) {
-                target.ref_ = refForAtom(keywords.at(i));
-                QString key = Doc::canonicalTitle(keywords.at(i)->string());
-                targetRecMultiMap_.insert(key, target);
-            }
-        }
-        if (child->doc().hasTargets()) {
-            const QList<Atom*>& toc = child->doc().targets();
-            TargetRec target;
-            target.node_ = child;
-            target.priority_ = 2;
-
-            for (int i = 0; i < toc.size(); ++i) {
-                target.ref_ = refForAtom(toc.at(i));
-                QString key = Doc::canonicalTitle(toc.at(i)->string());
-                targetRecMultiMap_.insert(key, target);
-            }
-        }
     }
 }
 
@@ -1096,17 +1447,6 @@ void QDocDatabase::generateIndex(const QString& fileName,
     QDocIndexFiles::destroyQDocIndexFiles();
 }
 
-QString QDocDatabase::refForAtom(const Atom* atom)
-{
-    if (atom) {
-        if (atom->type() == Atom::SectionLeft)
-            return Doc::canonicalTitle(Text::sectionHeading(atom).toString());
-        if (atom->type() == Atom::Target)
-            return Doc::canonicalTitle(atom->string());
-    }
-    return QString();
-}
-
 /*!
   If there are open namespaces, search for the function node
   having the same function name as the \a clone node in each
@@ -1135,21 +1475,28 @@ FunctionNode* QDocDatabase::findNodeInOpenNamespace(const QStringList& parentPat
 }
 
 /*!
-  Find a node of the specified \a type and \a subtype that is
-  reached with the specified \a path. If such a node is found
-  in an open namespace, prefix \a path with the name of the
-  open namespace and "::" and return a pointer to the node.
-  Othewrwise return 0.
- */
-Node* QDocDatabase::findNodeInOpenNamespace(QStringList& path,
-                                            Node::Type type,
-                                            Node::SubType subtype)
+  Find a node of the specified \a type that is reached with
+  the specified \a path qualified with the name of one of the
+  open namespaces (might not be any open ones). If the node
+  is found in an open namespace, prefix \a path with the name
+  of the open namespace and "::" and return a pointer to the
+  node. Othewrwise return 0.
+
+  This function only searches in the current primary tree.
+ */
+Node* QDocDatabase::findNodeInOpenNamespace(QStringList& path, Node::Type type)
 {
+    if (path.isEmpty())
+        return 0;
     Node* n = 0;
     if (!openNamespaces_.isEmpty()) {
         foreach (const QString& t, openNamespaces_) {
-            QStringList p = t.split("::") + path;
-            n = findNodeByNameAndType(p, type, subtype);
+            QStringList p;
+            if (t != path[0])
+                p = t.split("::") + path;
+            else
+                p = path;
+            n = primaryTree()->findNodeByNameAndType(p, type);
             if (n) {
                 path = p;
                 break;
@@ -1159,4 +1506,144 @@ Node* QDocDatabase::findNodeInOpenNamespace(QStringList& path,
     return n;
 }
 
+/*!
+  Finds all the collection nodes of type \a nt into the
+  collection node map \a cnn. Nodes that match \a relative
+  are not included.
+ */
+void QDocDatabase::mergeCollections(Node::Type nt, CNMap& cnm, const Node* relative)
+{
+    QRegExp singleDigit("\\b([0-9])\\b");
+    CNMultiMap cnmm;
+    forest_.mergeCollectionMaps(nt, cnmm);
+    cnm.clear();
+    if (cnmm.isEmpty())
+        return;
+    QStringList keys = cnmm.uniqueKeys();
+    foreach (QString key, keys) {
+        QList<CollectionNode*> values = cnmm.values(key);
+        CollectionNode* n = 0;
+        foreach (CollectionNode* v, values) {
+            if (v && v->wasSeen() && (v != relative)) {
+                n = v;
+                break;
+            }
+        }
+        if (n) {
+            if (values.size() > 1) {
+                foreach (CollectionNode* v, values) {
+                    if (v != n) {
+                        foreach (Node* t, v->members())
+                            n->addMember(t);
+                    }
+                }
+            }
+            if (!n->members().isEmpty()) {
+                QString sortKey = n->fullTitle().toLower();
+                if (sortKey.startsWith("the "))
+                    sortKey.remove(0, 4);
+                sortKey.replace(singleDigit, "0\\1");
+                cnm.insert(sortKey, n);
+            }
+        }
+    }
+}
+
+/*!
+  Finds all the collection nodes with the same name
+  and type as \a cn and merges their members into the
+  members list of \a cn.
+ */
+void QDocDatabase::mergeCollections(CollectionNode* cn)
+{
+    CollectionList cl;
+    forest_.getCorrespondingCollections(cn, cl);
+    if (!cl.empty()) {
+        foreach (CollectionNode* v, cl) {
+            if (v != cn) {
+                foreach (Node* t, v->members())
+                    cn->addMember(t);
+            }
+        }
+    }
+}
+
+/*!
+  Searches for the node that matches the path in \a atom. The
+  \a relative node is used if the first leg of the path is
+  empty, i.e. if the path begins with a hashtag. The function
+  also sets \a ref if there remains an unused leg in the path
+  after the node is found. The node is returned as well as the
+  \a ref. If the returned node pointer is null, \a ref is not
+  valid.
+ */
+const Node* QDocDatabase::findNodeForAtom(const Atom* atom, const Node* relative, QString& ref)
+{
+    const Node* node = 0;
+
+    QStringList targetPath = atom->string().split("#");
+    QString first = targetPath.first().trimmed();
+
+    Tree* domain = 0;
+    Node::Genus genus = Node::DontCare;
+    // Reserved for future use
+    //Node::Type goal = Node::NoType;
+
+    if (atom->isLinkAtom()) {
+        domain = atom->domain();
+        genus = atom->genus();
+        // Reserved for future use
+        //goal = atom->goal();
+    }
+
+    if (first.isEmpty())
+        node = relative; // search for a target on the current page.
+    else if (domain) {
+        if (first.endsWith(".html"))
+            node = domain->findNodeByNameAndType(QStringList(first), Node::Document);
+        else if (first.endsWith("()"))
+            node = domain->findFunctionNode(first, 0, genus);
+        else {
+            int flags = SearchBaseClasses | SearchEnumValues;
+            QStringList nodePath = first.split("::");
+            QString target;
+            targetPath.removeFirst();
+            if (!targetPath.isEmpty()) {
+                target = targetPath.at(0);
+                targetPath.removeFirst();
+            }
+            if (relative && relative->tree()->moduleName() != domain->moduleName())
+                relative = 0;
+            node = domain->findNodeForTarget(nodePath, target, relative, flags, genus, ref);
+            return node;
+        }
+    }
+    else {
+        if (first.endsWith(".html")) {
+            node = findNodeByNameAndType(QStringList(first), Node::Document);
+            // the path may also refer to an example file with .html extension
+            if (!node && first.contains("/"))
+                return findNodeForTarget(targetPath, relative, genus, ref);
+        }
+        else if (first.endsWith("()"))
+            node = findFunctionNode(first, relative, genus);
+        else {
+            node = findNodeForTarget(targetPath, relative, genus, ref);
+            return node;
+        }
+    }
+
+    if (node && ref.isEmpty()) {
+        if (!node->url().isEmpty())
+            return node;
+        targetPath.removeFirst();
+        if (!targetPath.isEmpty()) {
+            ref = node->root()->tree()->getRef(targetPath.first(), node);
+            if (ref.isEmpty())
+                node = 0;
+        }
+    }
+    return node;
+}
+
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/qdocdatabase.h b/src/tools/qdoc/qdocdatabase.h
index 4decba5f79..8b67aca971 100644
--- a/src/tools/qdoc/qdocdatabase.h
+++ b/src/tools/qdoc/qdocdatabase.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -45,19 +37,21 @@
 #include <qstring.h>
 #include <qmap.h>
 #include "tree.h"
+#include "config.h"
+#include "text.h"
+#include <qdebug.h>
 
 QT_BEGIN_NAMESPACE
 
-typedef QMap<QString, DocNode*> DocNodeMap;
-typedef QMap<QString, QmlClassNode*> QmlTypeMap;
 typedef QMap<QString, NodeMap> NodeMapMap;
 typedef QMap<QString, NodeMultiMap> NodeMultiMapMap;
 typedef QMultiMap<QString, Node*> QDocMultiMap;
 typedef QMap<Text, const Node*> TextToNodeMap;
-typedef QMultiMap<QString, DocNode*> DocNodeMultiMap;
+typedef QList<CollectionNode*> CollectionList;
 
 class Atom;
 class Generator;
+class QDocDatabase;
 
 enum FindFlag {
     SearchBaseClasses = 0x1,
@@ -65,20 +59,146 @@ enum FindFlag {
     NonFunction = 0x4
 };
 
-struct TargetRec
+class QDocForest
 {
   public:
-    enum Type { Unknown, Target, Keyword, Contents, Class, Function, Page, Subtitle };
-    TargetRec() : node_(0), priority_(INT_MAX), type_(Unknown) { }
-    bool isEmpty() const { return ref_.isEmpty(); }
-    //void debug(int idx, const QString& key);
-    Node* node_;
-    QString ref_;
-    int priority_;
-    Type type_;
-};
-typedef QMultiMap<QString, TargetRec> TargetRecMultiMap;
+    friend class QDocDatabase;
+    QDocForest(QDocDatabase* qdb)
+        : qdb_(qdb), primaryTree_(0), currentIndex_(0) { }
+    ~QDocForest();
+
+    NamespaceNode* firstRoot();
+    NamespaceNode* nextRoot();
+    Tree* firstTree();
+    Tree* nextTree();
+    Tree* primaryTree() { return primaryTree_; }
+    Tree* findTree(const QString& t) { return forest_.value(t); }
+    NamespaceNode* primaryTreeRoot() { return (primaryTree_ ? primaryTree_->root() : 0); }
+    bool isEmpty() { return searchOrder().isEmpty(); }
+    bool done() { return (currentIndex_ >= searchOrder().size()); }
+    const QVector<Tree*>& searchOrder();
+    const QVector<Tree*>& indexSearchOrder();
+    void setSearchOrder();
+
+    const Node* findNode(const QStringList& path,
+                         const Node* relative,
+                         int findFlags,
+                         Node::Genus genus) {
+        foreach (Tree* t, searchOrder()) {
+            const Node* n = t->findNode(path, relative, findFlags, genus);
+            if (n)
+                return n;
+            relative = 0;
+        }
+        return 0;
+    }
+
+    Node* findNodeByNameAndType(const QStringList& path, Node::Type type) {
+        foreach (Tree* t, searchOrder()) {
+            Node* n = t->findNodeByNameAndType(path, type);
+            if (n)
+                return n;
+        }
+        return 0;
+    }
+
+    ClassNode* findClassNode(const QStringList& path) {
+        foreach (Tree* t, searchOrder()) {
+            ClassNode* n = t->findClassNode(path);
+            if (n)
+                return n;
+        }
+        return 0;
+    }
+
+    Node* findNodeForInclude(const QStringList& path) {
+        foreach (Tree* t, searchOrder()) {
+            Node* n = t->findNodeForInclude(path);
+            if (n)
+                return n;
+        }
+        return 0;
+    }
+
+    InnerNode* findRelatesNode(const QStringList& path) {
+        foreach (Tree* t, searchOrder()) {
+            InnerNode* n = t->findRelatesNode(path);
+            if (n)
+                return n;
+        }
+        return 0;
+    }
+
+    const Node* findFunctionNode(const QString& target,
+                                 const Node* relative,
+                                 Node::Genus genus) {
+        foreach (Tree* t, searchOrder()) {
+            const Node* n = t->findFunctionNode(target, relative, genus);
+            if (n)
+                return n;
+            relative = 0;
+        }
+        return 0;
+    }
+    const Node* findNodeForTarget(QStringList& targetPath,
+                                  const Node* relative,
+                                  Node::Genus genus,
+                                  QString& ref);
+
+    const Node* findTypeNode(const QStringList& path, const Node* relative)
+    {
+        foreach (Tree* t, searchOrder()) {
+            int flags = SearchBaseClasses | SearchEnumValues | NonFunction;
+            const Node* n = t->findNode(path, relative, flags, Node::DontCare);
+            if (n)
+                return n;
+            relative = 0;
+        }
+        return 0;
+    }
 
+    const DocNode* findDocNodeByTitle(const QString& title)
+    {
+        foreach (Tree* t, searchOrder()) {
+            const DocNode* n = t->findDocNodeByTitle(title);
+            if (n)
+                return n;
+        }
+        return 0;
+    }
+
+    QmlClassNode* lookupQmlType(const QString& name)
+    {
+        foreach (Tree* t, searchOrder()) {
+            QmlClassNode* qcn = t->lookupQmlType(name);
+            if (qcn)
+                return qcn;
+        }
+        return 0;
+    }
+    void mergeCollectionMaps(Node::Type nt, CNMultiMap& cnmm);
+    void getCorrespondingCollections(CollectionNode* cn, CollectionList& cl)
+    {
+        foreach (Tree* t, searchOrder()) {
+            CollectionNode* ccn = t->getCorrespondingCollection(cn);
+            if (ccn)
+                cl.append(ccn);
+        }
+    }
+
+  private:
+    void newPrimaryTree(const QString& module);
+    NamespaceNode* newIndexTree(const QString& module);
+
+  private:
+    QDocDatabase*          qdb_;
+    Tree*                  primaryTree_;
+    int                    currentIndex_;
+    QMap<QString, Tree*>   forest_;
+    QVector<Tree*>         searchOrder_;
+    QVector<Tree*>         indexSearchOrder_;
+    QVector<QString>       moduleNames_;
+};
 
 class QDocDatabase
 {
@@ -89,100 +209,136 @@ class QDocDatabase
     static void destroyQdocDB();
     ~QDocDatabase();
 
-    const DocNodeMap& groups() const { return groups_; }
-    const DocNodeMap& modules() const { return modules_; }
-    const DocNodeMap& qmlModules() const { return qmlModules_; }
-
-    DocNode* getGroup(const QString& name);
-    DocNode* findGroup(const QString& name);
-    DocNode* findModule(const QString& name);
-    QmlModuleNode* findQmlModule(const QString& name);
-
-    DocNode* addGroup(const QString& name);
-    DocNode* addModule(const QString& name);
-    QmlModuleNode* addQmlModule(const QString& name);
-
-    DocNode* addToGroup(const QString& name, Node* node);
-    DocNode* addToModule(const QString& name, Node* node);
-    void addToQmlModule(const QString& name, Node* node);
-
-    QmlClassNode* findQmlType(const QString& qmid, const QString& name) const;
-    QmlClassNode* findQmlType(const ImportRec& import, const QString& name) const;
-
-    void findAllClasses(const InnerNode *node);
-    void findAllFunctions(const InnerNode *node);
-    void findAllLegaleseTexts(const InnerNode *node);
-    void findAllNamespaces(const InnerNode *node);
-    void findAllObsoleteThings(const InnerNode* node);
-    void findAllSince(const InnerNode *node);
-    void buildCollections();
-
-    // special collection access functions
-    NodeMap& getCppClasses() { return nonCompatClasses_; }
-    NodeMap& getMainClasses() { return mainClasses_; }
-    NodeMap& getCompatibilityClasses() { return compatClasses_; }
-    NodeMap& getObsoleteClasses() { return obsoleteClasses_; }
-    NodeMap& getClassesWithObsoleteMembers() { return classesWithObsoleteMembers_; }
-    NodeMap& getObsoleteQmlTypes() { return obsoleteQmlTypes_; }
-    NodeMap& getQmlTypesWithObsoleteMembers() { return qmlTypesWithObsoleteMembers_; }
-    NodeMap& getNamespaces() { return namespaceIndex_; }
-    NodeMap& getServiceClasses() { return serviceClasses_; }
-    NodeMap& getQmlTypes() { return qmlClasses_; }
-    NodeMapMap& getFunctionIndex() { return funcIndex_; }
-    TextToNodeMap& getLegaleseTexts() { return legaleseTexts_; }
-    const NodeMap& getClassMap(const QString& key) const;
-    const NodeMap& getQmlTypeMap(const QString& key) const;
-    const NodeMultiMap& getSinceMap(const QString& key) const;
-
-    const Node* resolveTarget(const QString& target, const Node* relative, const Node* self=0);
-    const Node* findNodeForTarget(const QString& target, const Node* relative);
-    void insertTarget(const QString& name, TargetRec::Type type, Node* node, int priority);
-
-    /* convenience functions
-       Many of these will be either eliminated or replaced.
-    */
-    QString refForAtom(const Atom* atom);
-    Tree* tree() { return tree_; }
-    NamespaceNode* treeRoot() { return tree_->root(); }
-    void resolveInheritance() { tree_->resolveInheritance(); }
-    void resolveQmlInheritance(InnerNode* root);
-    void resolveIssues();
-    void fixInheritance() { tree_->fixInheritance(); }
-    void resolveProperties() { tree_->resolveProperties(); }
+    Tree* findTree(const QString& t) { return forest_.findTree(t); }
+    const CNMap& groups() { return primaryTree()->groups(); }
+    const CNMap& modules() { return primaryTree()->modules(); }
+    const CNMap& qmlModules() { return primaryTree()->qmlModules(); }
+
+    GroupNode* getGroup(const QString& name) { return primaryTree()->getGroup(name); }
+    GroupNode* findGroup(const QString& name) { return primaryTree()->findGroup(name); }
+    ModuleNode* findModule(const QString& name) { return primaryTree()->findModule(name); }
+    QmlModuleNode* findQmlModule(const QString& name) { return primaryTree()->findQmlModule(name); }
 
-    const Node* findNode(const QStringList& path) { return tree_->findNode(path); }
-    ClassNode* findClassNode(const QStringList& path) { return tree_->findClassNode(path); }
-    NamespaceNode* findNamespaceNode(const QStringList& path) { return tree_->findNamespaceNode(path); }
+    GroupNode* addGroup(const QString& name) { return primaryTree()->addGroup(name); }
+    ModuleNode* addModule(const QString& name) { return primaryTree()->addModule(name); }
+    QmlModuleNode* addQmlModule(const QString& name) { return primaryTree()->addQmlModule(name); }
 
-    NameCollisionNode* findCollisionNode(const QString& name) const {
-        return tree_->findCollisionNode(name);
+    GroupNode* addToGroup(const QString& name, Node* node) {
+        return primaryTree()->addToGroup(name, node);
     }
+    ModuleNode* addToModule(const QString& name, Node* node) {
+        return primaryTree()->addToModule(name, node);
+    }
+    QmlModuleNode* addToQmlModule(const QString& name, Node* node) {
+        return primaryTree()->addToQmlModule(name, node);
+    }
+    void addExampleNode(ExampleNode* n) { primaryTree()->addExampleNode(n); }
+    ExampleNodeMap& exampleNodeMap() { return primaryTree()->exampleNodeMap(); }
 
-    const DocNode* findDocNodeByTitle(const QString& title, const Node* relative = 0) const;
-    const Node *findUnambiguousTarget(const QString &target, QString& ref, const Node* relative);
-    QString findTarget(const QString &target, const Node *node) const;
-    void resolveTargets(InnerNode* root);
+    QmlClassNode* findQmlType(const QString& name);
+    QmlClassNode* findQmlType(const QString& qmid, const QString& name);
+    QmlClassNode* findQmlType(const ImportRec& import, const QString& name);
 
+ private:
+    void findAllClasses(InnerNode *node);
+    void findAllFunctions(InnerNode *node);
+    void findAllLegaleseTexts(InnerNode *node);
+    void findAllNamespaces(InnerNode *node);
+    void findAllObsoleteThings(InnerNode* node);
+    void findAllSince(InnerNode *node);
+
+ public:
+    /*******************************************************************
+     special collection access functions
+    ********************************************************************/
+    NodeMap& getCppClasses();
+    NodeMap& getMainClasses();
+    NodeMap& getCompatibilityClasses();
+    NodeMap& getObsoleteClasses();
+    NodeMap& getClassesWithObsoleteMembers();
+    NodeMap& getObsoleteQmlTypes();
+    NodeMap& getQmlTypesWithObsoleteMembers();
+    NodeMap& getNamespaces();
+    NodeMap& getServiceClasses();
+    NodeMap& getQmlBasicTypes();
+    NodeMap& getQmlTypes();
+    NodeMapMap& getFunctionIndex();
+    TextToNodeMap& getLegaleseTexts();
+    const NodeMap& getClassMap(const QString& key);
+    const NodeMap& getQmlTypeMap(const QString& key);
+    const NodeMultiMap& getSinceMap(const QString& key);
+
+    /*******************************************************************
+      Many of these will be either eliminated or replaced.
+    ********************************************************************/
+    void resolveInheritance() { primaryTree()->resolveInheritance(); }
+    void resolveQmlInheritance(InnerNode* root);
+    void resolveIssues();
+    void fixInheritance() { primaryTree()->fixInheritance(); }
+    void resolveProperties() { primaryTree()->resolveProperties(); }
+
+    void resolveTargets() {
+        primaryTree()->resolveTargets(primaryTreeRoot());
+    }
+    void insertTarget(const QString& name,
+                      const QString& title,
+                      TargetRec::Type type,
+                      Node* node,
+                      int priority) {
+        primaryTree()->insertTarget(name, title, type, node, priority);
+    }
+
+    /*******************************************************************
+      The functions declared below are called for the current tree only.
+    ********************************************************************/
     FunctionNode* findFunctionNode(const QStringList& parentPath, const FunctionNode* clone) {
-        return tree_->findFunctionNode(parentPath, clone);
+        return primaryTree()->findFunctionNode(parentPath, clone);
+    }
+    FunctionNode* findNodeInOpenNamespace(const QStringList& parentPath, const FunctionNode* clone);
+    Node* findNodeInOpenNamespace(QStringList& path, Node::Type type);
+    const Node* checkForCollision(const QString& name) {
+        return primaryTree()->checkForCollision(name);
     }
-    Node* findNodeByNameAndType(const QStringList& path, Node::Type type, Node::SubType subtype){
-        return tree_->findNodeByNameAndType(path, type, subtype, 0);
+    /*******************************************************************/
+
+    /*******************************************************************
+      The functions declared below handle the parameters in '[' ']'.
+    ********************************************************************/
+    const Node* findNodeForAtom(const Atom* atom, const Node* relative, QString& ref);
+    /*******************************************************************/
+
+    /*******************************************************************
+      The functions declared below are called for all trees.
+    ********************************************************************/
+    ClassNode* findClassNode(const QStringList& path) { return forest_.findClassNode(path); }
+    Node* findNodeForInclude(const QStringList& path) { return forest_.findNodeForInclude(path); }
+    InnerNode* findRelatesNode(const QStringList& path) { return forest_.findRelatesNode(path); }
+    const Node* findFunctionNode(const QString& target, const Node* relative, Node::Genus genus) {
+        return forest_.findFunctionNode(target, relative, genus);
+    }
+    const Node* findTypeNode(const QString& type, const Node* relative);
+    const Node* findNodeForTarget(const QString& target, const Node* relative);
+    const DocNode* findDocNodeByTitle(const QString& title) {
+        return forest_.findDocNodeByTitle(title);
     }
-    NameCollisionNode* checkForCollision(const QString& name) const {
-        return tree_->checkForCollision(name);
+    Node* findNodeByNameAndType(const QStringList& path, Node::Type type) {
+        return forest_.findNodeByNameAndType(path, type);
     }
-    void addBaseClass(ClassNode* subclass,
-                      Node::Access access,
-                      const QStringList& basePath,
-                      const QString& dataTypeWithTemplateArgs,
-                      InnerNode* parent) {
-        tree_->addBaseClass(subclass, access, basePath, dataTypeWithTemplateArgs, parent);
+
+  private:
+    const Node* findNodeForTarget(QStringList& targetPath,
+                                  const Node* relative,
+                                  Node::Genus genus,
+                                  QString& ref) {
+        return forest_.findNodeForTarget(targetPath, relative, genus, ref);
     }
+
+    /*******************************************************************/
+  public:
     void addPropertyFunction(PropertyNode* property,
                              const QString& funcName,
                              PropertyNode::FunctionRole funcRole) {
-        tree_->addPropertyFunction(property, funcName, funcRole);
+        primaryTree()->addPropertyFunction(property, funcName, funcRole);
     }
 
     void setVersion(const QString& v) { version_ = v; }
@@ -198,37 +354,48 @@ class QDocDatabase
 
     void clearOpenNamespaces() { openNamespaces_.clear(); }
     void insertOpenNamespace(const QString& path) { openNamespaces_.insert(path); }
-    FunctionNode* findNodeInOpenNamespace(const QStringList& parentPath, const FunctionNode* clone);
-    Node* findNodeInOpenNamespace(QStringList& path, Node::Type type, Node::SubType subtype);
     void setShowInternal(bool value) { showInternal_ = value; }
 
-    /* debugging functions */
-    void printModules() const;
-    void printQmlModules() const;
+    // Try to make this function private.
+    QDocForest& forest() { return forest_; }
+    NamespaceNode* primaryTreeRoot() { return forest_.primaryTreeRoot(); }
+    void newPrimaryTree(const QString& module) { forest_.newPrimaryTree(module); }
+    NamespaceNode* newIndexTree(const QString& module) { return forest_.newIndexTree(module); }
+    const QVector<Tree*>& searchOrder() { return forest_.searchOrder(); }
+    void setLocalSearch() { forest_.searchOrder_ = QVector<Tree*>(1, primaryTree()); }
+    void setSearchOrder(const QVector<Tree*>& searchOrder) { forest_.searchOrder_ = searchOrder; }
+    void setSearchOrder() { forest_.setSearchOrder(); }
+    void mergeCollections(Node::Type nt, CNMap& cnm, const Node* relative);
+    void mergeCollections(CollectionNode* cn);
 
  private:
     friend class QDocIndexFiles;
     friend class QDocTagFiles;
 
-    const Node* findNode(const QStringList& path, const Node* relative, int findFlags) {
-        return tree_->findNode(path, relative, findFlags);
+    const Node* findNode(const QStringList& path,
+                         const Node* relative,
+                         int findFlags,
+                         Node::Genus genus) {
+        return forest_.findNode(path, relative, findFlags, genus);
     }
+    void processForest(void (QDocDatabase::*) (InnerNode*));
+    static void initializeDB();
 
  private:
     QDocDatabase();
-    QDocDatabase(QDocDatabase const& ) { };         // copy constructor is private
-    QDocDatabase& operator=(QDocDatabase const& );  // assignment operator is private
+    QDocDatabase(QDocDatabase const& ) : showInternal_(false), forest_(this) { }
+    QDocDatabase& operator=(QDocDatabase const& );
+    Tree* primaryTree() { return forest_.primaryTree(); }
+
+ public:
+    static bool             debug;
 
  private:
     static QDocDatabase*    qdocDB_;
+    static NodeMap          typeNodeMap_;
     bool                    showInternal_;
     QString                 version_;
-    QDocMultiMap            masterMap_;
-    Tree*                   tree_;
-    DocNodeMap              groups_;
-    DocNodeMap              modules_;
-    DocNodeMap              qmlModules_;
-    QmlTypeMap              qmlTypeMap_;
+    QDocForest              forest_;
 
     NodeMap                 nonCompatClasses_;
     NodeMap                 mainClasses_;
@@ -239,14 +406,13 @@ class QDocDatabase
     NodeMap                 qmlTypesWithObsoleteMembers_;
     NodeMap                 namespaceIndex_;
     NodeMap                 serviceClasses_;
+    NodeMap                 qmlBasicTypes_;
     NodeMap                 qmlClasses_;
     NodeMapMap              newClassMaps_;
     NodeMapMap              newQmlTypeMaps_;
     NodeMultiMapMap         newSinceMaps_;
     NodeMapMap              funcIndex_;
     TextToNodeMap           legaleseTexts_;
-    DocNodeMultiMap         docNodesByTitle_;
-    TargetRecMultiMap       targetRecMultiMap_;
     QSet<QString>           openNamespaces_;
 };
 
diff --git a/src/tools/qdoc/qdocindexfiles.cpp b/src/tools/qdoc/qdocindexfiles.cpp
index 00c9c55020..7445292a56 100644
--- a/src/tools/qdoc/qdocindexfiles.cpp
+++ b/src/tools/qdoc/qdocindexfiles.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -54,6 +46,8 @@
 
 QT_BEGIN_NAMESPACE
 
+static Node* top = 0;
+
 /*!
   \class QDocIndexFiles
 
@@ -77,6 +71,7 @@ QDocIndexFiles::QDocIndexFiles()
 QDocIndexFiles::~QDocIndexFiles()
 {
     qdb_ = 0;
+    gen_ = 0;
 }
 
 /*!
@@ -109,10 +104,13 @@ void QDocIndexFiles::readIndexes(const QStringList& indexFiles)
     foreach (const QString& indexFile, indexFiles) {
         QString msg = "Loading index file: " + indexFile;
         Location::logToStdErr(msg);
+        //qDebug() << msg;
         readIndexFile(indexFile);
     }
 }
 
+static bool readingRoot = true;
+
 /*!
   Reads and parses the index file at \a path.
  */
@@ -144,13 +142,16 @@ void QDocIndexFiles::readIndexFile(const QString& path)
         basesList_.clear();
         relatedList_.clear();
 
+        readingRoot = true;
+        NamespaceNode* root = qdb_->newIndexTree(project_);
+
         // Scan all elements in the XML file, constructing a map that contains
         // base classes for each class found.
-
         QDomElement child = indexElement.firstChildElement();
         while (!child.isNull()) {
-            readIndexSection(child, qdb_->treeRoot(), indexUrl);
+            readIndexSection(child, root, indexUrl);
             child = child.nextSiblingElement();
+            readingRoot = true;
         }
 
         // Now that all the base classes have been found for this index,
@@ -164,13 +165,16 @@ void QDocIndexFiles::readIndexFile(const QString& path)
   appropriate node(s).
  */
 void QDocIndexFiles::readIndexSection(const QDomElement& element,
-                                      InnerNode* parent,
+                                      Node* current,
                                       const QString& indexUrl)
 {
     QString name = element.attribute("name");
     QString href = element.attribute("href");
     Node* node;
     Location location;
+    InnerNode* parent = 0;
+    if (current->isInnerNode())
+        parent = static_cast<InnerNode*>(current);
 
     QString filePath;
     int lineNo = 0;
@@ -189,9 +193,11 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
     }
     else if (element.nodeName() == "class") {
         node = new ClassNode(parent, name);
-        basesList_.append(QPair<ClassNode*,QString>(static_cast<ClassNode*>(node),
-                                                   element.attribute("bases")));
-
+        if (element.hasAttribute("bases")) {
+            QString bases = element.attribute("bases");
+            if (!bases.isEmpty())
+                basesList_.append(QPair<ClassNode*,QString>(static_cast<ClassNode*>(node), bases));
+        }
         if (!indexUrl.isEmpty())
             location = Location(indexUrl + QLatin1Char('/') + name.toLower() + ".html");
         else if (!indexUrl.isNull())
@@ -201,8 +207,7 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
             abstract = true;
         node->setAbstract(abstract);
     }
-    else if ((element.nodeName() == "qmlclass") ||
-             ((element.nodeName() == "page") && (element.attribute("subtype") == "qmlclass"))) {
+    else if (element.nodeName() == "qmlclass") {
         QmlClassNode* qcn = new QmlClassNode(parent, name);
         qcn->setTitle(element.attribute("title"));
         QString qmlModuleName = element.attribute("qml-module-name");
@@ -213,8 +218,9 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
             abstract = true;
         qcn->setAbstract(abstract);
         QString qmlFullBaseName = element.attribute("qml-base-type");
-        if (!qmlFullBaseName.isEmpty())
+        if (!qmlFullBaseName.isEmpty()) {
             qcn->setQmlBaseName(qmlFullBaseName);
+        }
         if (element.hasAttribute("location"))
             name = element.attribute("location", QString());
         if (!indexUrl.isEmpty())
@@ -254,11 +260,11 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
         if (element.attribute("writable") == "false")
             readonly = true;
         QmlPropertyNode* qpn = 0;
-        if (parent->type() == Node::Document) {
+        if (parent->isQmlType()) {
             QmlClassNode* qcn = static_cast<QmlClassNode*>(parent);
             qpn = new QmlPropertyNode(qcn, name, type, attached);
         }
-        else if (parent->type() == Node::QmlPropertyGroup) {
+        else if (parent->isQmlPropertyGroup()) {
             QmlPropertyGroupNode* qpgn = static_cast<QmlPropertyGroupNode*>(parent);
             qpn = new QmlPropertyNode(qpgn, name, type, attached);
         }
@@ -277,6 +283,31 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
         FunctionNode* fn = new FunctionNode(t, parent, name, attached);
         node = fn;
     }
+    else if (element.nodeName() == "group") {
+        GroupNode* gn = qdb_->addGroup(name);
+        gn->setTitle(element.attribute("title"));
+        gn->setSubTitle(element.attribute("subtitle"));
+        if (element.attribute("seen") == "true")
+            gn->markSeen();
+        node = gn;
+    }
+    else if (element.nodeName() == "module") {
+        ModuleNode* mn = qdb_->addModule(name);
+        mn->setTitle(element.attribute("title"));
+        mn->setSubTitle(element.attribute("subtitle"));
+        if (element.attribute("seen") == "true")
+            mn->markSeen();
+        node = mn;
+    }
+    else if (element.nodeName() == "qmlmodule") {
+        QString t = element.attribute("qml-module-name") + " " + element.attribute("qml-module-version");
+        QmlModuleNode* qmn = qdb_->addQmlModule(t);
+        qmn->setTitle(element.attribute("title"));
+        qmn->setSubTitle(element.attribute("subtitle"));
+        if (element.attribute("seen") == "true")
+            qmn->markSeen();
+        node = qmn;
+    }
     else if (element.nodeName() == "page") {
         Node::SubType subtype;
         Node::PageType ptype = Node::NoPageType;
@@ -293,18 +324,6 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
             subtype = Node::File;
             ptype = Node::NoPageType;
         }
-        else if (attr == "group") {
-            subtype = Node::Group;
-            ptype = Node::OverviewPage;
-        }
-        else if (attr == "module") {
-            subtype = Node::Module;
-            ptype = Node::OverviewPage;
-        }
-        else if (attr == "qmlmodule") {
-            subtype = Node::QmlModule;
-            ptype = Node::OverviewPage;
-        }
         else if (attr == "page") {
             subtype = Node::Page;
             ptype = Node::ArticlePage;
@@ -313,25 +332,10 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
             subtype = Node::ExternalPage;
             ptype = Node::ArticlePage;
         }
-        else if (attr == "qmlclass") {
-            subtype = Node::QmlClass;
-            ptype = Node::ApiPage;
-        }
-        else if (attr == "qmlbasictype") {
-            subtype = Node::QmlBasicType;
-            ptype = Node::ApiPage;
-        }
         else
             return;
 
-        DocNode* docNode = 0;
-        if (subtype == Node::QmlModule) {
-            QString t = element.attribute("qml-module-name") + " " +
-                element.attribute("qml-module-version");
-            docNode = qdb_->addQmlModule(t);
-        }
-        else
-            docNode = new DocNode(parent, name, subtype, ptype);
+        DocNode* docNode = new DocNode(parent, name, subtype, ptype);
         docNode->setTitle(element.attribute("title"));
 
         if (element.hasAttribute("location"))
@@ -383,31 +387,33 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
     }
     else if (element.nodeName() == "function") {
         FunctionNode::Virtualness virt;
-        if (element.attribute("virtual") == "non")
+        QString t = element.attribute("virtual");
+        if (t == "non")
             virt = FunctionNode::NonVirtual;
-        else if (element.attribute("virtual") == "impure")
+        else if (t == "impure")
             virt = FunctionNode::ImpureVirtual;
-        else if (element.attribute("virtual") == "pure")
+        else if (t == "pure")
             virt = FunctionNode::PureVirtual;
         else
             return;
 
+        t = element.attribute("meta");
         FunctionNode::Metaness meta;
-        if (element.attribute("meta") == "plain")
+        if (t == "plain")
             meta = FunctionNode::Plain;
-        else if (element.attribute("meta") == "signal")
+        else if (t == "signal")
             meta = FunctionNode::Signal;
-        else if (element.attribute("meta") == "slot")
+        else if (t == "slot")
             meta = FunctionNode::Slot;
-        else if (element.attribute("meta") == "constructor")
+        else if (t == "constructor")
             meta = FunctionNode::Ctor;
-        else if (element.attribute("meta") == "destructor")
+        else if (t == "destructor")
             meta = FunctionNode::Dtor;
-        else if (element.attribute("meta") == "macro")
+        else if (t == "macro")
             meta = FunctionNode::MacroWithParams;
-        else if (element.attribute("meta") == "macrowithparams")
+        else if (t == "macrowithparams")
             meta = FunctionNode::MacroWithParams;
-        else if (element.attribute("meta") == "macrowithoutparams")
+        else if (t == "macrowithoutparams")
             meta = FunctionNode::MacroWithoutParams;
         else
             return;
@@ -426,6 +432,10 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
                         QPair<FunctionNode*,QString>(functionNode,
                                                      element.attribute("relates")));
         }
+        /*
+          Note: The "signature" attribute was written to the
+          index file, but it is not read back in. Is that ok?
+         */
 
         QDomElement child = element.firstChildElement("parameter");
         while (!child.isNull()) {
@@ -453,15 +463,18 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
             location = Location(parent->name().toLower() + ".html");
     }
     else if (element.nodeName() == "keyword") {
-        qdb_->insertTarget(name, TargetRec::Keyword, parent, 1);
+        QString title = element.attribute("title");
+        qdb_->insertTarget(name, title, TargetRec::Keyword, current, 1);
         return;
     }
     else if (element.nodeName() == "target") {
-        qdb_->insertTarget(name, TargetRec::Target, parent, 2);
+        QString title = element.attribute("title");
+        qdb_->insertTarget(name, title, TargetRec::Target, current, 2);
         return;
     }
     else if (element.nodeName() == "contents") {
-        qdb_->insertTarget(name, TargetRec::Contents, parent, 3);
+        QString title = element.attribute("title");
+        qdb_->insertTarget(name, title, TargetRec::Contents, current, 3);
         return;
     }
     else
@@ -513,7 +526,7 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
 
     QString moduleName = element.attribute("module");
     if (!moduleName.isEmpty())
-        node->setModuleName(moduleName);
+        qdb_->addToModule(moduleName, node);
     if (!href.isEmpty()) {
         if (node->isExternalPage())
             node->setUrl(href);
@@ -529,15 +542,8 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
     QString groupsAttr = element.attribute("groups");
     if (!groupsAttr.isEmpty()) {
         QStringList groupNames = groupsAttr.split(",");
-        for (int i=0; i<groupNames.size(); ++i) {
-            DocNode* dn = qdb_->findGroup(groupNames[i]);
-            if (dn) {
-                dn->addMember(node);
-            }
-            else {
-                qDebug() << "NODE:" << node->name() << "GROUPS:" << groupNames;
-                qDebug() << "DID NOT FIND GROUP for:" << node->name();
-            }
+        foreach (QString name, groupNames) {
+            qdb_->addToGroup(name, node);
         }
     }
 
@@ -558,83 +564,59 @@ void QDocIndexFiles::readIndexSection(const QDomElement& element,
         node->setReconstitutedBrief(briefAttr);
     }
 
-    if (node->isInnerNode()) {
-        InnerNode* inner = static_cast<InnerNode*>(node);
+    // zzz
+    bool useParent = (element.nodeName() == "namespace" && name.isEmpty());
+    if (element.hasChildNodes()) {
         QDomElement child = element.firstChildElement();
         while (!child.isNull()) {
-            if (element.nodeName() == "class") {
-                readIndexSection(child, inner, indexUrl);
-            }
-            else if (element.nodeName() == "qmlclass") {
-                readIndexSection(child, inner, indexUrl);
-            }
-            else if (element.nodeName() == "page") {
-                readIndexSection(child, inner, indexUrl);
-            }
-            else if (element.nodeName() == "namespace" && !name.isEmpty()) {
-                // The root node in the index is a namespace with an empty name.
-                readIndexSection(child, inner, indexUrl);
-            }
-            else {
+            if (useParent)
                 readIndexSection(child, parent, indexUrl);
-            }
+            else
+                readIndexSection(child, node, indexUrl);
             child = child.nextSiblingElement();
         }
     }
 }
 
 /*!
+  This function tries to resolve class inheritance immediately
+  after the index file is read. It is not always possible to
+  resolve a class inheritance at this point, because the base
+  class might be in an index file that hasn't been read yet, or
+  it might be in one of the header files that will be read for
+  the current module. These cases will be resolved after all
+  the index files and header and source files have been read,
+  just prior to beginning the generate phase for the current
+  module.
+
+  I don't think this is completely correct because it always
+  sets the access to public.
  */
 void QDocIndexFiles::resolveIndex()
 {
     QPair<ClassNode*,QString> pair;
     foreach (pair, basesList_) {
         foreach (const QString& base, pair.second.split(QLatin1Char(','))) {
-            Node* n = qdb_->treeRoot()->findChildNodeByNameAndType(base, Node::Class);
-            if (n) {
-                pair.first->addBaseClass(Node::Public, static_cast<ClassNode*>(n));
-            }
+            QStringList basePath = base.split(QString("::"));
+            Node* n = qdb_->findClassNode(basePath);
+            if (n)
+                pair.first->addResolvedBaseClass(Node::Public, static_cast<ClassNode*>(n));
+            else
+                pair.first->addUnresolvedBaseClass(Node::Public, basePath, QString());
         }
     }
 
     QPair<FunctionNode*,QString> relatedPair;
     foreach (relatedPair, relatedList_) {
-        Node* n = qdb_->treeRoot()->findChildNodeByNameAndType(relatedPair.second, Node::Class);
+        QStringList path = relatedPair.second.split("::");
+        Node* n = qdb_->findRelatesNode(path);
         if (n)
             relatedPair.first->setRelates(static_cast<ClassNode*>(n));
     }
-}
-
-/*!
-  Normally this is used for writing the \e groups attribute,
-  but it can be used for writing any attribute with a list
-  value that comes from some subset of the members of \a n.
 
-  \note The members of \a n are \e not the children of \a n.
-
-  The names we want to include are the names of the members
-  of \a n that have node type \a t and node subtype \a st.
-  The attribute name is \a attr. The names are joined with
-  the space character and written with \a writer.
- */
-void QDocIndexFiles::writeMembersAttribute(QXmlStreamWriter& writer,
-                                           const InnerNode* n,
-                                           Node::Type t,
-                                           Node::SubType st,
-                                           const QString& attr)
-{
-    const NodeList& members = n->members();
-    if (!members.isEmpty()) {
-        QStringList names;
-        NodeList::ConstIterator i = members.constBegin();
-        while (i != members.constEnd()) {
-            if ((*i)->type() == t && (*i)->subType() == st)
-                names.append((*i)->name());
-            ++i;
-        }
-        if (!names.isEmpty())
-            writer.writeAttribute(attr, names.join(","));
-    }
+    // No longer needed.
+    basesList_.clear();
+    relatedList_.clear();
 }
 
 /*!
@@ -663,17 +645,29 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
     case Node::Class:
         nodeName = "class";
         break;
-    case Node::Document:
-        nodeName = "page";
-        if (node->subType() == Node::QmlClass) {
+    case Node::QmlType:
+        {
             nodeName = "qmlclass";
             QmlModuleNode* qmn = node->qmlModule();
             if (qmn)
                 qmlModuleName = qmn->qmlModuleName();
             qmlFullBaseName = node->qmlFullBaseName();
         }
-        else if (node->subType() == Node::QmlBasicType)
-            nodeName = "qmlbasictype";
+        break;
+    case Node::QmlBasicType:
+        nodeName = "qmlbasictype";
+        break;
+    case Node::Document:
+        nodeName = "page";
+        break;
+    case Node::Group:
+        nodeName = "group";
+        break;
+    case Node::Module:
+        nodeName = "module";
+        break;
+    case Node::QmlModule:
+        nodeName = "qmlmodule";
         break;
     case Node::Enum:
         nodeName = "enum";
@@ -741,14 +735,14 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
 
     QString objName = node->name();
     // Special case: only the root node should have an empty name.
-    if (objName.isEmpty() && node != qdb_->treeRoot())
+    if (objName.isEmpty() && node != qdb_->primaryTreeRoot())
         return false;
 
     writer.writeStartElement(nodeName);
 
     QXmlStreamAttributes attributes;
 
-    if (node->type() != Node::Document) {
+    if (!node->isDocNode() && !node->isGroup() && !node->isModule() && !node->isQmlModule()) {
         QString threadSafety;
         switch (node->threadSafeness()) {
         case Node::NonReentrant:
@@ -832,10 +826,12 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
     if (!href.isEmpty())
         writer.writeAttribute("href", href);
 
-    writer.writeAttribute("access", access);
     writer.writeAttribute("status", status);
-    if (node->isAbstract())
-        writer.writeAttribute("abstract", "true");
+    if (!node->isDocNode() && !node->isGroup() && !node->isModule() && !node->isQmlModule()) {
+        writer.writeAttribute("access", access);
+        if (node->isAbstract())
+            writer.writeAttribute("abstract", "true");
+    }
     if (!node->location().fileName().isEmpty())
         writer.writeAttribute("location", node->location().fileName());
     if (!node->location().filePath().isEmpty()) {
@@ -847,7 +843,7 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
         writer.writeAttribute("since", node->since());
     }
 
-    QString brief = node->doc().briefText().toString();
+    QString brief = node->doc().trimmedBriefText(node->name()).toString();
     switch (node->type()) {
     case Node::Class:
         {
@@ -856,13 +852,16 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             QList<RelatedClass> bases = classNode->baseClasses();
             QSet<QString> baseStrings;
             foreach (const RelatedClass& related, bases) {
-                ClassNode* baseClassNode = related.node;
-                baseStrings.insert(baseClassNode->name());
+                ClassNode* n = related.node_;
+                if (n)
+                    baseStrings.insert(n->fullName());
             }
-            writer.writeAttribute("bases", QStringList(baseStrings.toList()).join(","));
+            if (!baseStrings.isEmpty())
+                writer.writeAttribute("bases", QStringList(baseStrings.toList()).join(","));
             if (!node->moduleName().isEmpty())
                 writer.writeAttribute("module", node->moduleName());
-            writeMembersAttribute(writer, classNode, Node::Document, Node::Group, "groups");
+            if (!classNode->groupNames().isEmpty())
+                writer.writeAttribute("groups", classNode->groupNames().join(","));
             if (!brief.isEmpty())
                 writer.writeAttribute("brief", brief);
         }
@@ -872,7 +871,20 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             const NamespaceNode* namespaceNode = static_cast<const NamespaceNode*>(node);
             if (!namespaceNode->moduleName().isEmpty())
                 writer.writeAttribute("module", namespaceNode->moduleName());
-            writeMembersAttribute(writer, namespaceNode, Node::Document, Node::Group, "groups");
+            if (!namespaceNode->groupNames().isEmpty())
+                writer.writeAttribute("groups", namespaceNode->groupNames().join(","));
+            if (!brief.isEmpty())
+                writer.writeAttribute("brief", brief);
+        }
+        break;
+    case Node::QmlType:
+        {
+            const QmlClassNode* qcn = static_cast<const QmlClassNode*>(node);
+            writer.writeAttribute("title", qcn->title());
+            writer.writeAttribute("fulltitle", qcn->fullTitle());
+            writer.writeAttribute("subtitle", qcn->subTitle());
+            if (!qcn->groupNames().isEmpty())
+                writer.writeAttribute("groups", qcn->groupNames().join(","));
             if (!brief.isEmpty())
                 writer.writeAttribute("brief", brief);
         }
@@ -880,8 +892,8 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
     case Node::Document:
         {
             /*
-              Document nodes (such as manual pages) contain subtypes,
-              titles and other attributes.
+              Document nodes (such as manual pages) have a subtype,
+              a title, and other attributes.
             */
             bool writeModuleName = false;
             const DocNode* docNode = static_cast<const DocNode*>(node);
@@ -897,26 +909,6 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             case Node::File:
                 writer.writeAttribute("subtype", "file");
                 break;
-            case Node::Group:
-                {
-                    writer.writeAttribute("subtype", "group");
-                    writer.writeAttribute("seen", docNode->wasSeen() ? "true" : "false");
-                    // Groups contain information about their group members.
-                    const NodeList& members = docNode->members();
-                    QStringList names;
-                    foreach (const Node* member, members) {
-                        names.append(member->name());
-                    }
-                    writer.writeAttribute("members", names.join(","));
-                    writeModuleName = true;
-                }
-                break;
-            case Node::Module:
-                writer.writeAttribute("subtype", "module");
-                break;
-            case Node::QmlModule:
-                writer.writeAttribute("subtype", "qmlmodule");
-                break;
             case Node::Page:
                 writer.writeAttribute("subtype", "page");
                 writeModuleName = true;
@@ -924,12 +916,6 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             case Node::ExternalPage:
                 writer.writeAttribute("subtype", "externalpage");
                 break;
-            case Node::QmlClass:
-                //writer.writeAttribute("subtype", "qmlclass");
-                break;
-            case Node::QmlBasicType:
-                //writer.writeAttribute("subtype", "qmlbasictype");
-                break;
             default:
                 break;
             }
@@ -939,7 +925,82 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             if (!node->moduleName().isEmpty() && writeModuleName) {
                 writer.writeAttribute("module", node->moduleName());
             }
-            writeMembersAttribute(writer, docNode, Node::Document, Node::Group, "groups");
+            if (!docNode->groupNames().isEmpty())
+                writer.writeAttribute("groups", docNode->groupNames().join(","));
+            if (!brief.isEmpty())
+                writer.writeAttribute("brief", brief);
+        }
+        break;
+    case Node::Group:
+        {
+            const GroupNode* gn = static_cast<const GroupNode*>(node);
+            writer.writeAttribute("seen", gn->wasSeen() ? "true" : "false");
+            writer.writeAttribute("title", gn->title());
+            if (!gn->subTitle().isEmpty())
+                writer.writeAttribute("subtitle", gn->subTitle());
+            if (!gn->moduleName().isEmpty())
+                writer.writeAttribute("module", gn->moduleName());
+            if (!gn->groupNames().isEmpty())
+                writer.writeAttribute("groups", gn->groupNames().join(","));
+            /*
+              This is not read back in, so it probably
+              shouldn't be written out in the first place.
+            */
+            if (!gn->members().isEmpty()) {
+                QStringList names;
+                foreach (const Node* member, gn->members())
+                    names.append(member->name());
+                writer.writeAttribute("members", names.join(","));
+            }
+            if (!brief.isEmpty())
+                writer.writeAttribute("brief", brief);
+        }
+        break;
+    case Node::Module:
+        {
+            const ModuleNode* mn = static_cast<const ModuleNode*>(node);
+            writer.writeAttribute("seen", mn->wasSeen() ? "true" : "false");
+            writer.writeAttribute("title", mn->title());
+            if (!mn->subTitle().isEmpty())
+                writer.writeAttribute("subtitle", mn->subTitle());
+            if (!mn->moduleName().isEmpty())
+                writer.writeAttribute("module", mn->moduleName());
+            if (!mn->groupNames().isEmpty())
+                writer.writeAttribute("groups", mn->groupNames().join(","));
+            /*
+              This is not read back in, so it probably
+              shouldn't be written out in the first place.
+            */
+            if (!mn->members().isEmpty()) {
+                QStringList names;
+                foreach (const Node* member, mn->members())
+                    names.append(member->name());
+                writer.writeAttribute("members", names.join(","));
+            }
+            if (!brief.isEmpty())
+                writer.writeAttribute("brief", brief);
+        }
+    case Node::QmlModule:
+        {
+            const QmlModuleNode* qmn = static_cast<const QmlModuleNode*>(node);
+            writer.writeAttribute("seen", qmn->wasSeen() ? "true" : "false");
+            writer.writeAttribute("title", qmn->title());
+            if (!qmn->subTitle().isEmpty())
+                writer.writeAttribute("subtitle", qmn->subTitle());
+            if (!qmn->moduleName().isEmpty())
+                writer.writeAttribute("module", qmn->moduleName());
+            if (!qmn->groupNames().isEmpty())
+                writer.writeAttribute("groups", qmn->groupNames().join(","));
+            /*
+              This is not read back in, so it probably
+              shouldn't be written out in the first place.
+            */
+            if (!qmn->members().isEmpty()) {
+                QStringList names;
+                foreach (const Node* member, qmn->members())
+                    names.append(member->name());
+                writer.writeAttribute("members", names.join(","));
+            }
             if (!brief.isEmpty())
                 writer.writeAttribute("brief", brief);
         }
@@ -995,14 +1056,34 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             writer.writeAttribute("overload", functionNode->isOverload()?"true":"false");
             if (functionNode->isOverload())
                 writer.writeAttribute("overload-number", QString::number(functionNode->overloadNumber()));
-            if (functionNode->relates())
+            if (functionNode->relates()) {
                 writer.writeAttribute("relates", functionNode->relates()->name());
+            }
             const PropertyNode* propertyNode = functionNode->associatedProperty();
             if (propertyNode)
                 writer.writeAttribute("associated-property", propertyNode->name());
             writer.writeAttribute("type", functionNode->returnType());
             if (!brief.isEmpty())
                 writer.writeAttribute("brief", brief);
+
+            /*
+              Note: The "signature" attribute is written to the
+              index file, but it is not read back in. Is that ok?
+            */
+            QString signature = functionNode->signature();
+            if (functionNode->isConst())
+                signature += " const";
+            writer.writeAttribute("signature", signature);
+
+            for (int i = 0; i < functionNode->parameters().size(); ++i) {
+                Parameter parameter = functionNode->parameters()[i];
+                writer.writeStartElement("parameter");
+                writer.writeAttribute("left", parameter.leftType());
+                writer.writeAttribute("right", parameter.rightType());
+                writer.writeAttribute("name", parameter.name());
+                writer.writeAttribute("default", parameter.defaultValue());
+                writer.writeEndElement(); // parameter
+            }
         }
         break;
     case Node::QmlProperty:
@@ -1010,7 +1091,7 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             QmlPropertyNode* qpn = static_cast<QmlPropertyNode*>(node);
             writer.writeAttribute("type", qpn->dataType());
             writer.writeAttribute("attached", qpn->isAttached() ? "true" : "false");
-            writer.writeAttribute("writable", qpn->isWritable(qdb_) ? "true" : "false");
+            writer.writeAttribute("writable", qpn->isWritable() ? "true" : "false");
             if (!brief.isEmpty())
                 writer.writeAttribute("brief", brief);
         }
@@ -1070,10 +1151,76 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
                 writer.writeAttribute("brief", brief);
         }
         break;
+    case Node::Enum:
+        {
+            const EnumNode* enumNode = static_cast<const EnumNode*>(node);
+            if (enumNode->flagsType()) {
+                writer.writeAttribute("typedef",enumNode->flagsType()->fullDocumentName());
+            }
+            foreach (const EnumItem& item, enumNode->items()) {
+                writer.writeStartElement("value");
+                writer.writeAttribute("name", item.name());
+                writer.writeAttribute("value", item.value());
+                writer.writeEndElement(); // value
+            }
+        }
+        break;
+    case Node::Typedef:
+        {
+            const TypedefNode* typedefNode = static_cast<const TypedefNode*>(node);
+            if (typedefNode->associatedEnum()) {
+                writer.writeAttribute("enum",typedefNode->associatedEnum()->fullDocumentName());
+            }
+        }
+        break;
     default:
         break;
     }
 
+    /*
+      For our pages, we canonicalize the target, keyword and content
+      item names so that they can be used by qdoc for other sets of
+      documentation.
+
+      The reason we do this here is that we don't want to ruin
+      externally composed indexes, containing non-qdoc-style target names
+      when reading in indexes.
+
+      targets and keywords are now allowed in any node, not just inner nodes.
+    */
+
+    if (node->doc().hasTargets()) {
+        bool external = false;
+        if (node->type() == Node::Document) {
+            const DocNode* docNode = static_cast<const DocNode*>(node);
+            if (docNode->subType() == Node::ExternalPage)
+                external = true;
+        }
+        foreach (const Atom* target, node->doc().targets()) {
+            QString title = target->string();
+            QString name =  Doc::canonicalTitle(title);
+            writer.writeStartElement("target");
+            if (!external)
+                writer.writeAttribute("name", name);
+            else
+                writer.writeAttribute("name", title);
+            if (name != title)
+                writer.writeAttribute("title", title);
+            writer.writeEndElement(); // target
+        }
+    }
+    if (node->doc().hasKeywords()) {
+        foreach (const Atom* keyword, node->doc().keywords()) {
+            QString title = keyword->string();
+            QString name =  Doc::canonicalTitle(title);
+            writer.writeStartElement("keyword");
+            writer.writeAttribute("name", name);
+            if (name != title)
+                writer.writeAttribute("title", title);
+            writer.writeEndElement(); // keyword
+        }
+    }
+
     // Inner nodes and function nodes contain child nodes of some sort, either
     // actual child nodes or function parameters. For these, we close the
     // opening tag, create child elements, then add a closing tag for the
@@ -1082,36 +1229,6 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
     if (node->isInnerNode()) {
         const InnerNode* inner = static_cast<const InnerNode*>(node);
 
-        // For internal pages, we canonicalize the target, keyword and content
-        // item names so that they can be used by qdoc for other sets of
-        // documentation.
-        // The reason we do this here is that we don't want to ruin
-        // externally composed indexes, containing non-qdoc-style target names
-        // when reading in indexes.
-
-        if (inner->doc().hasTargets()) {
-            bool external = false;
-            if (inner->type() == Node::Document) {
-                const DocNode* docNode = static_cast<const DocNode*>(inner);
-                if (docNode->subType() == Node::ExternalPage)
-                    external = true;
-            }
-            foreach (const Atom* target, inner->doc().targets()) {
-                QString targetName = target->string();
-                if (!external)
-                    targetName = Doc::canonicalTitle(targetName);
-                writer.writeStartElement("target");
-                writer.writeAttribute("name", targetName);
-                writer.writeEndElement(); // target
-            }
-        }
-        if (inner->doc().hasKeywords()) {
-            foreach (const Atom* keyword, inner->doc().keywords()) {
-                writer.writeStartElement("keyword");
-                writer.writeAttribute("name", Doc::canonicalTitle(keyword->string()));
-                writer.writeEndElement(); // keyword
-            }
-        }
         if (inner->doc().hasTableOfContents()) {
             for (int i = 0; i < inner->doc().tableOfContents().size(); ++i) {
                 Atom* item = inner->doc().tableOfContents()[i];
@@ -1125,70 +1242,6 @@ bool QDocIndexFiles::generateIndexSection(QXmlStreamWriter& writer,
             }
         }
     }
-    else if (node->type() == Node::Function) {
-        const FunctionNode* functionNode = static_cast<const FunctionNode*>(node);
-        // Write a signature attribute for convenience.
-        QStringList signatureList;
-        QStringList resolvedParameters;
-        foreach (const Parameter& parameter, functionNode->parameters()) {
-            QString leftType = parameter.leftType();
-            const Node* leftNode = qdb_->findNode(parameter.leftType().split("::"),
-                                                  0,
-                                                  SearchBaseClasses|NonFunction);
-            if (!leftNode || leftNode->type() != Node::Typedef) {
-                leftNode = qdb_->findNode(parameter.leftType().split("::"),
-                                          node->parent(),
-                                          SearchBaseClasses|NonFunction);
-            }
-            if (leftNode && leftNode->type() == Node::Typedef) {
-                if (leftNode->type() == Node::Typedef) {
-                    const TypedefNode* typedefNode =  static_cast<const TypedefNode*>(leftNode);
-                    if (typedefNode->associatedEnum()) {
-                        leftType = "QFlags<" + typedefNode->associatedEnum()->fullDocumentName() +
-                            QLatin1Char('>');
-                    }
-                }
-                else
-                    leftType = leftNode->fullDocumentName();
-            }
-            resolvedParameters.append(leftType);
-            signatureList.append(leftType + QLatin1Char(' ') + parameter.name());
-        }
-
-        QString signature = functionNode->name() + QLatin1Char('(') + signatureList.join(", ") +
-            QLatin1Char(')');
-        if (functionNode->isConst())
-            signature += " const";
-        writer.writeAttribute("signature", signature);
-
-        for (int i = 0; i < functionNode->parameters().size(); ++i) {
-            Parameter parameter = functionNode->parameters()[i];
-            writer.writeStartElement("parameter");
-            writer.writeAttribute("left", resolvedParameters[i]);
-            writer.writeAttribute("right", parameter.rightType());
-            writer.writeAttribute("name", parameter.name());
-            writer.writeAttribute("default", parameter.defaultValue());
-            writer.writeEndElement(); // parameter
-        }
-    }
-    else if (node->type() == Node::Enum) {
-        const EnumNode* enumNode = static_cast<const EnumNode*>(node);
-        if (enumNode->flagsType()) {
-            writer.writeAttribute("typedef",enumNode->flagsType()->fullDocumentName());
-        }
-        foreach (const EnumItem& item, enumNode->items()) {
-            writer.writeStartElement("value");
-            writer.writeAttribute("name", item.name());
-            writer.writeAttribute("value", item.value());
-            writer.writeEndElement(); // value
-        }
-    }
-    else if (node->type() == Node::Typedef) {
-        const TypedefNode* typedefNode = static_cast<const TypedefNode*>(node);
-        if (typedefNode->associatedEnum()) {
-            writer.writeAttribute("enum",typedefNode->associatedEnum()->fullDocumentName());
-        }
-    }
     return true;
 }
 
@@ -1239,7 +1292,7 @@ bool compareNodes(const Node* n1, const Node* n2)
             return false;
     }
 
-    if (n1->type() == Node::Document && n2->type() == Node::Document) {
+    if (n1->isDocNode() && n2->isDocNode()) {
         const DocNode* f1 = static_cast<const DocNode*>(n1);
         const DocNode* f2 = static_cast<const DocNode*>(n2);
         if (f1->fullTitle() < f2->fullTitle())
@@ -1262,9 +1315,13 @@ void QDocIndexFiles::generateIndexSections(QXmlStreamWriter& writer,
                                            bool generateInternalNodes)
 {
     /*
-      Note that the groups are written after all the other nodes.
+      Note that groups, modules, and QML modules are written
+      after all the other nodes.
      */
-    if (!node->isGroup() && generateIndexSection(writer, node, generateInternalNodes)) {
+    if (node->isGroup() || node->isModule() || node->isQmlModule())
+        return;
+
+    if (generateIndexSection(writer, node, generateInternalNodes)) {
         if (node->isInnerNode()) {
             const InnerNode* inner = static_cast<const InnerNode*>(node);
 
@@ -1272,22 +1329,50 @@ void QDocIndexFiles::generateIndexSections(QXmlStreamWriter& writer,
             std::sort(cnodes.begin(), cnodes.end(), compareNodes);
 
             foreach (Node* child, cnodes) {
-                /*
-                  Don't generate anything for a collision node. We want
-                  children of collision nodes in the index, but leaving
-                  out the parent collision page will make searching for
-                  nodes easier.
-                 */
-                if (child->subType() == Node::Collision) {
-                    const InnerNode* pgn = static_cast<const InnerNode*>(child);
-                    foreach (Node* c, pgn->childNodes()) {
-                        generateIndexSections(writer, c, generateInternalNodes);
-                    }
+                generateIndexSections(writer, child, generateInternalNodes);
+            }
+        }
+
+        if (node == top) {
+            /*
+              We wait until the end of the index file to output the group, module,
+              and QML module elements. By outputting them at the end, when we read
+              the index file back in, all the group, module, and QML module member
+              elements will have already been created. It is then only necessary to
+              create the group, module, or QML module element and add each member to
+              its member list.
+            */
+            const CNMap& groups = qdb_->groups();
+            if (!groups.isEmpty()) {
+                CNMap::ConstIterator g = groups.constBegin();
+                while (g != groups.constEnd()) {
+                    if (generateIndexSection(writer, g.value(), generateInternalNodes))
+                        writer.writeEndElement();
+                    ++g;
+                }
+            }
+
+            const CNMap& modules = qdb_->modules();
+            if (!modules.isEmpty()) {
+                CNMap::ConstIterator g = modules.constBegin();
+                while (g != modules.constEnd()) {
+                    if (generateIndexSection(writer, g.value(), generateInternalNodes))
+                        writer.writeEndElement();
+                    ++g;
+                }
+            }
+
+            const CNMap& qmlModules = qdb_->qmlModules();
+            if (!qmlModules.isEmpty()) {
+                CNMap::ConstIterator g = qmlModules.constBegin();
+                while (g != qmlModules.constEnd()) {
+                    if (generateIndexSection(writer, g.value(), generateInternalNodes))
+                        writer.writeEndElement();
+                    ++g;
                 }
-                else
-                    generateIndexSections(writer, child, generateInternalNodes);
             }
         }
+
         writer.writeEndElement();
     }
 }
@@ -1320,23 +1405,8 @@ void QDocIndexFiles::generateIndex(const QString& fileName,
     writer.writeAttribute("version", qdb_->version());
     writer.writeAttribute("project", g->config()->getString(CONFIG_PROJECT));
 
-    generateIndexSections(writer, qdb_->treeRoot(), generateInternalNodes);
-
-    /*
-      We wait until the end of the index file to output the group elements.
-      By waiting until the end, when we read each group element, its members
-      will have already been created. It is then only necessary to create
-      the group page and add each member to its member list.
-     */
-    const DocNodeMap& groups = qdb_->groups();
-    if (!groups.isEmpty()) {
-        DocNodeMap::ConstIterator g = groups.constBegin();
-        while (g != groups.constEnd()) {
-            if (generateIndexSection(writer, g.value(), generateInternalNodes))
-                writer.writeEndElement();
-            ++g;
-        }
-    }
+    top = qdb_->primaryTreeRoot();
+    generateIndexSections(writer, top, generateInternalNodes);
 
     writer.writeEndElement(); // INDEX
     writer.writeEndElement(); // QDOCINDEX
diff --git a/src/tools/qdoc/qdocindexfiles.h b/src/tools/qdoc/qdocindexfiles.h
index e4a83176a2..e9e08eef7e 100644
--- a/src/tools/qdoc/qdocindexfiles.h
+++ b/src/tools/qdoc/qdocindexfiles.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -72,15 +64,10 @@ class QDocIndexFiles
                        bool generateInternalNodes = false);
 
     void readIndexFile(const QString& path);
-    void readIndexSection(const QDomElement& element, InnerNode* parent, const QString& indexUrl);
+    void readIndexSection(const QDomElement& element, Node* current, const QString& indexUrl);
     void resolveIndex();
     bool generateIndexSection(QXmlStreamWriter& writer, Node* node, bool generateInternalNodes = false);
     void generateIndexSections(QXmlStreamWriter& writer, Node* node, bool generateInternalNodes = false);
-    void writeMembersAttribute(QXmlStreamWriter& writer,
-                               const InnerNode* n,
-                               Node::Type t,
-                               Node::SubType st,
-                               const QString& attr);
 
  private:
     static QDocIndexFiles* qdocIndexFiles_;
@@ -89,7 +76,6 @@ class QDocIndexFiles
     QString project_;
     QList<QPair<ClassNode*,QString> > basesList_;
     QList<QPair<FunctionNode*,QString> > relatedList_;
-
 };
 
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/qdoctagfiles.cpp b/src/tools/qdoc/qdoctagfiles.cpp
index a0054ea229..6a67d41534 100644
--- a/src/tools/qdoc/qdoctagfiles.cpp
+++ b/src/tools/qdoc/qdoctagfiles.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -120,6 +112,7 @@ void QDocTagFiles::generateTagFileCompounds(QXmlStreamWriter& writer, const Inne
             kind = "namespace";
             break;
         case Node::Class:
+        case Node::QmlType:
             kind = "class";
             break;
         case Node::Enum:
@@ -147,7 +140,7 @@ void QDocTagFiles::generateTagFileCompounds(QXmlStreamWriter& writer, const Inne
         QString objName = node->name();
 
         // Special case: only the root node should have an empty name.
-        if (objName.isEmpty() && node != qdb_->treeRoot())
+        if (objName.isEmpty() && node != qdb_->primaryTreeRoot())
             continue;
 
         // *** Write the starting tag for the element here. ***
@@ -162,8 +155,9 @@ void QDocTagFiles::generateTagFileCompounds(QXmlStreamWriter& writer, const Inne
             const ClassNode* classNode = static_cast<const ClassNode*>(node);
             QList<RelatedClass> bases = classNode->baseClasses();
             foreach (const RelatedClass& related, bases) {
-                ClassNode* baseClassNode = related.node;
-                writer.writeTextElement("base", baseClassNode->name());
+                ClassNode* n = related.node_;
+                if (n)
+                    writer.writeTextElement("base", n->name());
             }
 
             // Recurse to write all members.
@@ -243,7 +237,7 @@ void QDocTagFiles::generateTagFileMembers(QXmlStreamWriter& writer, const InnerN
         QString objName = node->name();
 
         // Special case: only the root node should have an empty name.
-        if (objName.isEmpty() && node != qdb_->treeRoot())
+        if (objName.isEmpty() && node != qdb_->primaryTreeRoot())
             continue;
 
         // *** Write the starting tag for the element here. ***
@@ -294,31 +288,8 @@ void QDocTagFiles::generateTagFileMembers(QXmlStreamWriter& writer, const InnerN
                 QStringList pieces = gen_->fullDocumentLocation(node,Generator::useOutputSubdirs()).split(QLatin1Char('#'));
                 writer.writeTextElement("anchorfile", pieces[0]);
                 writer.writeTextElement("anchor", pieces[1]);
-
-                // Write a signature attribute for convenience.
-                QStringList signatureList;
-
-                foreach (const Parameter& parameter, functionNode->parameters()) {
-                    QString leftType = parameter.leftType();
-                    const Node* leftNode = qdb_->findNode(parameter.leftType().split("::"),
-                                                          0,
-                                                          SearchBaseClasses|NonFunction);
-                    if (!leftNode || leftNode->type() != Node::Typedef) {
-                        leftNode = qdb_->findNode(parameter.leftType().split("::"),
-                                                  node->parent(),
-                                                  SearchBaseClasses|NonFunction);
-                    }
-                    if (leftNode && leftNode->type() == Node::Typedef) {
-                        const TypedefNode* typedefNode = static_cast<const TypedefNode*>(leftNode);
-                        if (typedefNode->associatedEnum()) {
-                            leftType = "QFlags<" + typedefNode->associatedEnum()->fullDocumentName() +
-                                QLatin1Char('>');
-                        }
-                    }
-                    signatureList.append(leftType + QLatin1Char(' ') + parameter.name());
-                }
-
-                QString signature = QLatin1Char('(')+signatureList.join(", ")+QLatin1Char(')');
+                QString signature = functionNode->signature();
+                signature = signature.mid(signature.indexOf(QChar('('))).trimmed();
                 if (functionNode->isConst())
                     signature += " const";
                 if (functionNode->virtualness() == FunctionNode::PureVirtual)
@@ -395,7 +366,7 @@ void QDocTagFiles::generateTagFile(const QString& fileName, Generator* g)
     writer.setAutoFormatting(true);
     writer.writeStartDocument();
     writer.writeStartElement("tagfile");
-    generateTagFileCompounds(writer, qdb_->treeRoot());
+    generateTagFileCompounds(writer, qdb_->primaryTreeRoot());
     writer.writeEndElement(); // tagfile
     writer.writeEndDocument();
     file.close();
diff --git a/src/tools/qdoc/qdoctagfiles.h b/src/tools/qdoc/qdoctagfiles.h
index 1882ab2e0c..f91a3a7006 100644
--- a/src/tools/qdoc/qdoctagfiles.h
+++ b/src/tools/qdoc/qdoctagfiles.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlcodemarker.cpp b/src/tools/qdoc/qmlcodemarker.cpp
index 5e4e1d4b40..a5b5d0b43c 100644
--- a/src/tools/qdoc/qmlcodemarker.cpp
+++ b/src/tools/qdoc/qmlcodemarker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlcodemarker.h b/src/tools/qdoc/qmlcodemarker.h
index bc2321e076..c6e4aa7e19 100644
--- a/src/tools/qdoc/qmlcodemarker.h
+++ b/src/tools/qdoc/qmlcodemarker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlcodeparser.cpp b/src/tools/qdoc/qmlcodeparser.cpp
index 28b9c3ec9b..6e40deb9f7 100644
--- a/src/tools/qdoc/qmlcodeparser.cpp
+++ b/src/tools/qdoc/qmlcodeparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlcodeparser.h b/src/tools/qdoc/qmlcodeparser.h
index 71b4660fe7..cf60b1d7d7 100644
--- a/src/tools/qdoc/qmlcodeparser.h
+++ b/src/tools/qdoc/qmlcodeparser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,7 +50,6 @@ QT_BEGIN_NAMESPACE
 class Config;
 class Node;
 class QString;
-class Tree;
 
 class QmlCodeParser : public CodeParser
 {
diff --git a/src/tools/qdoc/qmlmarkupvisitor.cpp b/src/tools/qdoc/qmlmarkupvisitor.cpp
index 82836f02e8..44b6862e61 100644
--- a/src/tools/qdoc/qmlmarkupvisitor.cpp
+++ b/src/tools/qdoc/qmlmarkupvisitor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlmarkupvisitor.h b/src/tools/qdoc/qmlmarkupvisitor.h
index 7510dfbbea..09aa1f7400 100644
--- a/src/tools/qdoc/qmlmarkupvisitor.h
+++ b/src/tools/qdoc/qmlmarkupvisitor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsast.cpp b/src/tools/qdoc/qmlparser/qqmljsast.cpp
index 33b3868e66..e18a7ca76a 100644
--- a/src/tools/qdoc/qmlparser/qqmljsast.cpp
+++ b/src/tools/qdoc/qmlparser/qqmljsast.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsast_p.h b/src/tools/qdoc/qmlparser/qqmljsast_p.h
index 6cc3b7649e..fa4b2c3e13 100644
--- a/src/tools/qdoc/qmlparser/qqmljsast_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsast_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsastfwd_p.h b/src/tools/qdoc/qmlparser/qqmljsastfwd_p.h
index f8cba4981c..4949e3155e 100644
--- a/src/tools/qdoc/qmlparser/qqmljsastfwd_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsastfwd_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsastvisitor.cpp b/src/tools/qdoc/qmlparser/qqmljsastvisitor.cpp
index be2a082f43..f0f8f928c6 100644
--- a/src/tools/qdoc/qmlparser/qqmljsastvisitor.cpp
+++ b/src/tools/qdoc/qmlparser/qqmljsastvisitor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsastvisitor_p.h b/src/tools/qdoc/qmlparser/qqmljsastvisitor_p.h
index 1d67d4c75d..52221c7bd8 100644
--- a/src/tools/qdoc/qmlparser/qqmljsastvisitor_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsastvisitor_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsengine_p.cpp b/src/tools/qdoc/qmlparser/qqmljsengine_p.cpp
index 7dc3b6f6cb..7ac5dbc9bb 100644
--- a/src/tools/qdoc/qmlparser/qqmljsengine_p.cpp
+++ b/src/tools/qdoc/qmlparser/qqmljsengine_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsengine_p.h b/src/tools/qdoc/qmlparser/qqmljsengine_p.h
index 195b98bfd7..661681d19c 100644
--- a/src/tools/qdoc/qmlparser/qqmljsengine_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsglobal_p.h b/src/tools/qdoc/qmlparser/qqmljsglobal_p.h
index f9e5aa9643..004fe33885 100644
--- a/src/tools/qdoc/qmlparser/qqmljsglobal_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsglobal_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsgrammar.cpp b/src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
index 1e5f7a8c6d..d3fb3f8d1f 100644
--- a/src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
+++ b/src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsgrammar_p.h b/src/tools/qdoc/qmlparser/qqmljsgrammar_p.h
index 054b7cc2e0..6b3d1c8013 100644
--- a/src/tools/qdoc/qmlparser/qqmljsgrammar_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsgrammar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljskeywords_p.h b/src/tools/qdoc/qmlparser/qqmljskeywords_p.h
index c6277e0fcc..b8fe50086d 100644
--- a/src/tools/qdoc/qmlparser/qqmljskeywords_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljskeywords_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljslexer.cpp b/src/tools/qdoc/qmlparser/qqmljslexer.cpp
index 8e8ed954ad..4d053b8bd5 100644
--- a/src/tools/qdoc/qmlparser/qqmljslexer.cpp
+++ b/src/tools/qdoc/qmlparser/qqmljslexer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljslexer_p.h b/src/tools/qdoc/qmlparser/qqmljslexer_p.h
index 23af61d650..9106c94477 100644
--- a/src/tools/qdoc/qmlparser/qqmljslexer_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljslexer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsmemorypool_p.h b/src/tools/qdoc/qmlparser/qqmljsmemorypool_p.h
index 820ae8ed71..23d6b867cf 100644
--- a/src/tools/qdoc/qmlparser/qqmljsmemorypool_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsmemorypool_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsparser.cpp b/src/tools/qdoc/qmlparser/qqmljsparser.cpp
index b86b4a987f..262043b3b8 100644
--- a/src/tools/qdoc/qmlparser/qqmljsparser.cpp
+++ b/src/tools/qdoc/qmlparser/qqmljsparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlparser/qqmljsparser_p.h b/src/tools/qdoc/qmlparser/qqmljsparser_p.h
index bf963718fb..b0abf06b25 100644
--- a/src/tools/qdoc/qmlparser/qqmljsparser_p.h
+++ b/src/tools/qdoc/qmlparser/qqmljsparser_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtQml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/qmlvisitor.cpp b/src/tools/qdoc/qmlvisitor.cpp
index ec1ef41256..9ef5bab5e2 100644
--- a/src/tools/qdoc/qmlvisitor.cpp
+++ b/src/tools/qdoc/qmlvisitor.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -97,7 +89,7 @@ QmlDocVisitor::QmlDocVisitor(const QString &filePath,
     this->engine = engine;
     this->commands_ = commands;
     this->topics_ = topics;
-    current = QDocDatabase::qdocDB()->treeRoot();
+    current = QDocDatabase::qdocDB()->primaryTreeRoot();
 }
 
 /*!
@@ -249,7 +241,7 @@ bool QmlDocVisitor::applyDocumentation(QQmlJS::AST::SourceLocation location, Nod
         nodes.append(node);
         if (topicsUsed.size() > 0) {
             for (int i=0; i<topicsUsed.size(); ++i) {
-                if (topicsUsed.at(i).topic == QString("qmlpropertygroup")) {
+                if (topicsUsed.at(i).topic == COMMAND_QMLPROPERTYGROUP) {
                     qDebug() << "PROPERTY GROUP COMMAND SEEN:" <<  topicsUsed.at(i).args << filePath_;
                     break;
                 }
@@ -266,7 +258,7 @@ bool QmlDocVisitor::applyDocumentation(QQmlJS::AST::SourceLocation location, Nod
                         }
                         else {
                             bool isAttached = (topic == COMMAND_QMLATTACHEDPROPERTY);
-                            QmlPropertyNode* n = parent->hasQmlProperty(qpa.name_);
+                            QmlPropertyNode* n = parent->hasQmlProperty(qpa.name_, isAttached);
                             if (n == 0)
                                 n = new QmlPropertyNode(parent, qpa.name_, qpa.type_, isAttached);
                             n->setLocation(doc.location());
@@ -365,7 +357,7 @@ void QmlDocVisitor::applyMetacommands(QQmlJS::AST::SourceLocation,
             QString command = *i;
             ArgList args = doc.metaCommandArgs(command);
             if (command == COMMAND_QMLABSTRACT) {
-                if ((node->type() == Node::Document) && (node->subType() == Node::QmlClass)) {
+                if (node->isQmlType()) {
                     node->setAbstract(true);
                 }
             }
@@ -378,7 +370,7 @@ void QmlDocVisitor::applyMetacommands(QQmlJS::AST::SourceLocation,
             else if (command == COMMAND_QMLINHERITS) {
                 if (node->name() == args[0].first)
                     doc.location().warning(tr("%1 tries to inherit itself").arg(args[0].first));
-                else if (node->subType() == Node::QmlClass) {
+                else if (node->isQmlType()) {
                     QmlClassNode *qmlClass = static_cast<QmlClassNode*>(node);
                     qmlClass->setQmlBaseName(args[0].first);
                     QmlClassNode::addInheritedBy(args[0].first,node);
@@ -407,8 +399,7 @@ void QmlDocVisitor::applyMetacommands(QQmlJS::AST::SourceLocation,
                 node->setStatus(Node::Internal);
             }
             else if (command == COMMAND_OBSOLETE) {
-                if (node->status() != Node::Compat)
-                    node->setStatus(Node::Obsolete);
+                node->setStatus(Node::Obsolete);
             }
             else if (command == COMMAND_PAGEKEYWORDS) {
                 // Not done yet. Do we need this?
@@ -541,7 +532,7 @@ bool QmlDocVisitor::visit(QQmlJS::AST::UiPublicMember *member)
     switch (member->type) {
     case QQmlJS::AST::UiPublicMember::Signal:
     {
-        if (current->type() == Node::Document) {
+        if (current->isQmlType()) {
             QmlClassNode *qmlClass = static_cast<QmlClassNode *>(current);
             if (qmlClass) {
 
@@ -564,7 +555,7 @@ bool QmlDocVisitor::visit(QQmlJS::AST::UiPublicMember *member)
     {
         QString type = member->memberType.toString();
         QString name = member->name.toString();
-        if (current->type() == Node::Document) {
+        if (current->isQmlType()) {
             QmlClassNode *qmlClass = static_cast<QmlClassNode *>(current);
             if (qmlClass) {
                 QString name = member->name.toString();
@@ -608,7 +599,7 @@ bool QmlDocVisitor::visit(QQmlJS::AST::FunctionDeclaration* fd)
     if (nestingLevel > 1) {
         return true;
     }
-    if (current->type() == Node::Document) {
+    if (current->isQmlType()) {
         QmlClassNode* qmlClass = static_cast<QmlClassNode*>(current);
         if (qmlClass) {
             QString name = fd->name.toString();
@@ -661,7 +652,7 @@ bool QmlDocVisitor::visit(QQmlJS::AST::UiScriptBinding* )
     if (nestingLevel > 1) {
         return true;
     }
-    if (current->type() == Node::Document) {
+    if (current->isQmlType()) {
         QString handler = sb->qualifiedId->name.toString();
         if (handler.length() > 2 && handler.startsWith("on") && handler.at(2).isUpper()) {
             QmlClassNode* qmlClass = static_cast<QmlClassNode*>(current);
diff --git a/src/tools/qdoc/qmlvisitor.h b/src/tools/qdoc/qmlvisitor.h
index feeeb13497..ed9ba7c6eb 100644
--- a/src/tools/qdoc/qmlvisitor.h
+++ b/src/tools/qdoc/qmlvisitor.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/quoter.cpp b/src/tools/qdoc/quoter.cpp
index 33bd900fac..b1b8f1bfbc 100644
--- a/src/tools/qdoc/quoter.cpp
+++ b/src/tools/qdoc/quoter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/quoter.h b/src/tools/qdoc/quoter.h
index 622e225421..2a894963db 100644
--- a/src/tools/qdoc/quoter.h
+++ b/src/tools/qdoc/quoter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/separator.cpp b/src/tools/qdoc/separator.cpp
index af10ba364c..b8e8c8857c 100644
--- a/src/tools/qdoc/separator.cpp
+++ b/src/tools/qdoc/separator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/separator.h b/src/tools/qdoc/separator.h
index 4c1bd673b5..80a1581e89 100644
--- a/src/tools/qdoc/separator.h
+++ b/src/tools/qdoc/separator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/text.cpp b/src/tools/qdoc/text.cpp
index e2f682726d..7268e7218e 100644
--- a/src/tools/qdoc/text.cpp
+++ b/src/tools/qdoc/text.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -111,6 +103,22 @@ Text& Text::operator<<(const Atom& atom)
     return *this;
 }
 
+/*!
+  Special output operator for LinkAtom. It makes a copy of
+  the LinkAtom \a atom and connects the cop;y to the list
+  in this Text.
+ */
+Text& Text::operator<<(const LinkAtom& atom)
+{
+    if (first == 0) {
+        first = new LinkAtom(atom);
+        last = first;
+    }
+    else
+        last = new LinkAtom(last, atom);
+    return *this;
+}
+
 Text& Text::operator<<(const Text& text)
 {
     const Atom* atom = text.firstAtom();
diff --git a/src/tools/qdoc/text.h b/src/tools/qdoc/text.h
index 9274140caa..764ed8c18e 100644
--- a/src/tools/qdoc/text.h
+++ b/src/tools/qdoc/text.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,6 +57,7 @@ public:
     Text& operator<<(Atom::Type atomType);
     Text& operator<<(const QString& string);
     Text& operator<<(const Atom& atom);
+    Text& operator<<(const LinkAtom& atom);
     Text& operator<<(const Text& text);
     void stripFirstAtom();
     void stripLastAtom();
diff --git a/src/tools/qdoc/tokenizer.cpp b/src/tools/qdoc/tokenizer.cpp
index dc934a6473..7c9e9f338a 100644
--- a/src/tools/qdoc/tokenizer.cpp
+++ b/src/tools/qdoc/tokenizer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/tokenizer.h b/src/tools/qdoc/tokenizer.h
index 4e2c622f3c..c841a62d1d 100644
--- a/src/tools/qdoc/tokenizer.h
+++ b/src/tools/qdoc/tokenizer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qdoc/tree.cpp b/src/tools/qdoc/tree.cpp
index 113220059c..2e327a5ac8 100644
--- a/src/tools/qdoc/tree.cpp
+++ b/src/tools/qdoc/tree.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,132 +52,119 @@ QT_BEGIN_NAMESPACE
   This class is now private. Only class QDocDatabase has access.
   Please don't change this. If you must access class Tree, do it
   though the pointer to the singleton QDocDatabase.
+
+  Tree is being converted to a forest. A static member provides a
+  map of Tree* values with the module names as the keys. There is
+  one Tree in the map for each index file read, and there is one
+  tree that is not in the map for the module whose documentation
+  is being generated.
  */
 
 /*!
-  Constructs the singleton tree. \a qdb is the pointer to the
+  Constructs a Tree. \a qdb is the pointer to the singleton
   qdoc database that is constructing the tree. This might not
   be necessary, and it might be removed later.
  */
-Tree::Tree(QDocDatabase* qdb)
-      : qdb_(qdb), root_(0, QString())
+Tree::Tree(const QString& module, QDocDatabase* qdb)
+    : module_(module), qdb_(qdb), root_(0, QString())
 {
+    root_.setModuleName(module_);
+    root_.setTree(this);
 }
 
 /*!
-  Destroys the singleton Tree.
+  Destroys the Tree. The root node is a data member
+  of this object, so its destructor is called. The
+  destructor of each child node is called, and these
+  destructors are recursive. Thus the entire tree is
+  destroyed.
+
+  There are two maps of targets, keywords, and contents.
+  One map is indexed by ref, the other by title. The ref
+  is just the canonical form of the title. Both maps
+  use the same set of TargetRec objects as the values,
+  so the destructor only deletes the values from one of
+  the maps. Then it clears both maps.
  */
 Tree::~Tree()
 {
+    TargetMap::iterator i = nodesByTargetRef_.begin();
+    while (i != nodesByTargetRef_.end()) {
+        delete i.value();
+        ++i;
+    }
+    nodesByTargetRef_.clear();
+    nodesByTargetTitle_.clear();
 }
 
-// 1 calls 2
+/* API members */
+
 /*!
-  Searches the tree for a node that matches the \a path. The
-  search begins at \a start but can move up the parent chain
-  recursively if no match is found.
+  Calls findClassNode() first with \a path and \a start. If
+  it finds a node, the node is returned. If not, it calls
+  findNamespaceNode() with the same parameters. The result
+  is returned.
  */
-const Node* Tree::findNode(const QStringList& path,
-                           const Node* start,
-                           int findFlags,
-                           const Node* self) const
+Node* Tree::findNodeForInclude(const QStringList& path) const
 {
-    const Node* current = start;
-    if (!current)
-        current = root();
-
-    /*
-      First, search for a node assuming we don't want a QML node.
-      If that search fails, search again assuming we do want a
-      QML node.
-     */
-    const Node* n = findNode(path,current,findFlags,self,false);
-    if (!n) {
-        n = findNode(path,current,findFlags,self,true);
-    }
+    Node* n = findClassNode(path);
+    if (!n)
+        n = findNamespaceNode(path);
     return n;
 }
 
-// 2 is private; it is only called by 1.
 /*!
-  This overload function was extracted from the one above that has the
-  same signature without the last bool parameter, \a qml. This version
-  is called only by that other one. It is therefore private.  It can
-  be called a second time by that other version, if the first call
-  returns null. If \a qml is false, the search will only match a node
-  that is not a QML node.  If \a qml is true, the search will only
-  match a node that is a QML node.
-*/
-const Node* Tree::findNode(const QStringList& path,
-                           const Node* start,
-                           int findFlags,
-                           const Node* self,
-                           bool qml) const
+  Find the C++ class node named \a path. Begin the search at the
+  \a start node. If the \a start node is 0, begin the search
+  at the root of the tree. Only a C++ class node named \a path is
+  acceptible. If one is not found, 0 is returned.
+ */
+ClassNode* Tree::findClassNode(const QStringList& path, const Node* start) const
 {
-    const Node* current = start;
-    do {
-        const Node* node = current;
-        int i;
-        int start_idx = 0;
-
-        /*
-          If the path contains one or two double colons ("::"),
-          check first to see if the first two path strings refer
-          to a QML element. If they do, path[0] will be the QML
-          module identifier, and path[1] will be the QML type.
-          If the anser is yes, the reference identifies a QML
-          class node.
-        */
-        if (qml && path.size() >= 2 && !path[0].isEmpty()) {
-            QmlClassNode* qcn = qdb_->findQmlType(path[0], path[1]);
-            if (qcn) {
-                node = qcn;
-                if (path.size() == 2)
-                    return node;
-                start_idx = 2;
-            }
-        }
-
-        for (i = start_idx; i < path.size(); ++i) {
-            if (node == 0 || !node->isInnerNode())
-                break;
+    if (!start)
+        start = const_cast<NamespaceNode*>(root());
+    return static_cast<ClassNode*>(findNodeRecursive(path, 0, start, Node::Class));
+}
 
-            const Node* next = static_cast<const InnerNode*>(node)->findChildNodeByName(path.at(i), qml);
-            if (!next && (findFlags & SearchEnumValues) && i == path.size()-1)
-                next = static_cast<const InnerNode*>(node)->findEnumNodeForValue(path.at(i));
+/*!
+  Find the Namespace node named \a path. Begin the search at
+  the root of the tree. Only a Namespace node named \a path
+  is acceptible. If one is not found, 0 is returned.
+ */
+NamespaceNode* Tree::findNamespaceNode(const QStringList& path) const
+{
+    Node* start = const_cast<NamespaceNode*>(root());
+    return static_cast<NamespaceNode*>(findNodeRecursive(path, 0, start, Node::Namespace));
+}
 
-            if (!next && !qml && node->type() == Node::Class && (findFlags & SearchBaseClasses)) {
-                NodeList baseClasses = allBaseClasses(static_cast<const ClassNode*>(node));
-                foreach (const Node* baseClass, baseClasses) {
-                    next = static_cast<const InnerNode*>(baseClass)->findChildNodeByName(path.at(i));
-                    if (!next && (findFlags & SearchEnumValues) && i == path.size() - 1)
-                        next = static_cast<const InnerNode*>(baseClass)->findEnumNodeForValue(path.at(i));
-                    if (next)
-                        break;
-                }
-            }
-            node = next;
-        }
-        if (node && i == path.size()
-                && (!(findFlags & NonFunction) || node->type() != Node::Function
-                    || ((FunctionNode*)node)->metaness() == FunctionNode::MacroWithoutParams)) {
-            if ((node != self) && (node->type() != Node::QmlPropertyGroup)) {
-                if (node->subType() == Node::Collision) {
-                    node = node->applyModuleName(start);
-                }
-                return node;
-            }
-        }
-        current = current->parent();
-    } while (current);
+/*!
+  This function first ignores the \a clone node and searches
+  for the parent node with \a parentPath. If that search is
+  successful, it searches for a child node of the parent that
+  matches the \a clone node. If it finds a node that is just
+  like the \a clone, it returns a pointer to the found node.
 
-    return 0;
+  Apparently the search order is important here. Don't change
+  it unless you know what you are doing, or you will introduce
+  qdoc warnings.
+ */
+FunctionNode* Tree::findFunctionNode(const QStringList& parentPath, const FunctionNode* clone)
+{
+    const Node* parent = findNamespaceNode(parentPath);
+    if (parent == 0)
+        parent = findClassNode(parentPath, 0);
+    if (parent == 0)
+        parent = findNode(parentPath, 0, 0, Node::DontCare);
+    if (parent == 0 || !parent->isInnerNode())
+        return 0;
+    return ((InnerNode*)parent)->findFunctionNode(clone);
 }
 
+
 /*!
   Find the Qml type node named \a path. Begin the search at the
   \a start node. If the \a start node is 0, begin the search
-  at the root of the tree. Only a Qml type node named \a path is
+  at the root of the tree. Only a Qml type node named <\a path is
   acceptible. If one is not found, 0 is returned.
  */
 QmlClassNode* Tree::findQmlTypeNode(const QStringList& path)
@@ -203,60 +182,7 @@ QmlClassNode* Tree::findQmlTypeNode(const QStringList& path)
         if (qcn)
             return qcn;
     }
-    return static_cast<QmlClassNode*>(findNodeRecursive(path, 0, root(), Node::Document, Node::QmlClass));
-}
-
-/*!
-  First, search for a node with the specified \a name. If a matching
-  node is found, if it is a collision node, another collision with
-  this name has been found, so return the collision node. If the
-  matching node is not a collision node, the first collision for this
-  name has been found, so create a NameCollisionNode with the matching
-  node as its first child, and return a pointer to the new
-  NameCollisionNode. Otherwise return 0.
- */
-NameCollisionNode* Tree::checkForCollision(const QString& name) const
-{
-    Node* n = const_cast<Node*>(findNode(QStringList(name)));
-    if (n) {
-        if (n->subType() == Node::Collision) {
-            NameCollisionNode* ncn = static_cast<NameCollisionNode*>(n);
-            return ncn;
-        }
-        if (n->isInnerNode())
-            return new NameCollisionNode(static_cast<InnerNode*>(n));
-    }
-    return 0;
-}
-
-/*!
-  This function is like checkForCollision() in that it searches
-  for a collision node with the specified \a name. But it doesn't
-  create anything. If it finds a match, it returns the pointer.
-  Otherwise it returns 0.
- */
-NameCollisionNode* Tree::findCollisionNode(const QString& name) const
-{
-    Node* n = const_cast<Node*>(findNode(QStringList(name)));
-    if (n) {
-        if (n->subType() == Node::Collision) {
-            NameCollisionNode* ncn = static_cast<NameCollisionNode*>(n);
-            return ncn;
-        }
-    }
-    return 0;
-}
-
-/*!
-  This function just calls the const version of the same function
-  and returns the function node.
- */
-FunctionNode* Tree::findFunctionNode(const QStringList& path,
-                                     Node* relative,
-                                     int findFlags)
-{
-    return const_cast<FunctionNode*>
-            (const_cast<const Tree*>(this)->findFunctionNode(path,relative,findFlags));
+    return static_cast<QmlClassNode*>(findNodeRecursive(path, 0, root(), Node::QmlType));
 }
 
 /*!
@@ -269,22 +195,26 @@ FunctionNode* Tree::findFunctionNode(const QStringList& path,
  */
 const FunctionNode* Tree::findFunctionNode(const QStringList& path,
                                            const Node* relative,
-                                           int findFlags) const
+                                           int findFlags,
+                                           Node::Genus genus) const
 {
+    if (path.size() == 3 && !path[0].isEmpty() && (genus != Node::CPP)) {
+        QmlClassNode* qcn = lookupQmlType(QString(path[0] + "::" + path[1]));
+        if (!qcn) {
+            QStringList p(path[1]);
+            Node* n = findNodeByNameAndType(p, Node::QmlType);
+            if (n && n->isQmlType())
+                qcn = static_cast<QmlClassNode*>(n);
+        }
+        if (qcn)
+            return static_cast<const FunctionNode*>(qcn->findFunctionNode(path[2]));
+    }
+
     if (!relative)
         relative = root();
-
-    /*
-      If the path contains two double colons ("::"), check
-      first to see if it is a reference to a QML method. If
-      it is a reference to a QML method, first look up the
-      QML class node in the QML module map.
-     */
-    if (path.size() == 3 && !path[0].isEmpty()) {
-        QmlClassNode* qcn = qdb_->findQmlType(path[0], path[1]);
-        if (qcn) {
-            return static_cast<const FunctionNode*>(qcn->findFunctionNode(path[2]));
-        }
+    else if (genus != Node::DontCare) {
+        if (genus != relative->genus())
+            relative = root();
     }
 
     do {
@@ -299,7 +229,7 @@ const FunctionNode* Tree::findFunctionNode(const QStringList& path,
             if (i == path.size() - 1)
                 next = ((InnerNode*) node)->findFunctionNode(path.at(i));
             else
-                next = ((InnerNode*) node)->findChildNodeByName(path.at(i));
+                next = ((InnerNode*) node)->findChildNode(path.at(i), genus);
 
             if (!next && node->type() == Node::Class && (findFlags & SearchBaseClasses)) {
                 NodeList baseClasses = allBaseClasses(static_cast<const ClassNode*>(node));
@@ -307,7 +237,7 @@ const FunctionNode* Tree::findFunctionNode(const QStringList& path,
                     if (i == path.size() - 1)
                         next = static_cast<const InnerNode*>(baseClass)->findFunctionNode(path.at(i));
                     else
-                        next = static_cast<const InnerNode*>(baseClass)->findChildNodeByName(path.at(i));
+                        next = static_cast<const InnerNode*>(baseClass)->findChildNode(path.at(i), genus);
 
                     if (next)
                         break;
@@ -339,57 +269,34 @@ const FunctionNode* Tree::findFunctionNode(const QStringList& path,
     return 0;
 }
 
-/*!
-  This function just calls the const version of itself and
-  returns the result.
- */
-FunctionNode* Tree::findFunctionNode(const QStringList& parentPath,
-                                     const FunctionNode* clone,
-                                     Node* relative,
-                                     int findFlags)
+static NodeTypeList t;
+static const NodeTypeList& relatesTypes()
 {
-    return const_cast<FunctionNode*>(
-                const_cast<const Tree*>(this)->findFunctionNode(parentPath,
-                                                                clone,
-                                                                relative,
-                                                                findFlags));
+    if (t.isEmpty()) {
+        t.reserve(3);
+        t.append(NodeTypePair(Node::Class, Node::NoSubType));
+        t.append(NodeTypePair(Node::Namespace, Node::NoSubType));
+        t.append(NodeTypePair(Node::Document, Node::HeaderFile));
+    }
+    return t;
 }
 
 /*!
-  This function first ignores the \a clone node and searches
-  for the node having the \a parentPath by calling the main
-  findFunction(\a {parentPath}, \a {relative}, \a {findFlags}).
-  If that search is successful, then it searches for the \a clone
-  in the found parent node.
- */
-const FunctionNode* Tree::findFunctionNode(const QStringList& parentPath,
-                                           const FunctionNode* clone,
-                                           const Node* relative,
-                                           int findFlags) const
-{
-    const Node* parent = findNamespaceNode(parentPath);
-    if (parent == 0)
-        parent = findClassNode(parentPath, 0);
-    if (parent == 0)
-        parent = findNode(parentPath, relative, findFlags);
-    if (parent == 0 || !parent->isInnerNode())
-        return 0;
-    return ((InnerNode*)parent)->findFunctionNode(clone);
-}
+  This function searches for the node specified by \a path.
+  The matching node can be one of several different types
+  including a C++ class, a C++ namespace, or a C++ header
+  file.
 
-/*!
+  I'm not sure if it can be a QML type, but if that is a
+  possibility, the code can easily accommodate it.
+
+  If a matching node is found, a pointer to it is returned.
+  Otherwise 0 is returned.
  */
-void Tree::addBaseClass(ClassNode* subclass, Node::Access access,
-                        const QStringList& basePath,
-                        const QString& dataTypeWithTemplateArgs,
-                        InnerNode* parent)
+InnerNode* Tree::findRelatesNode(const QStringList& path)
 {
-    unresolvedInheritanceMap[subclass].append(
-                InheritanceBound(access,
-                                 basePath,
-                                 dataTypeWithTemplateArgs,
-                                 parent)
-                );
+    Node* n = findNodeRecursive(path, 0, root(), relatesTypes());
+    return ((n && n->isInnerNode()) ? static_cast<InnerNode*>(n) : 0);
 }
 
 /*!
@@ -402,24 +309,25 @@ void Tree::addPropertyFunction(PropertyNode* property,
 }
 
 /*!
-  This function resolves inheritance and reimplementation settings
-  for each C++ class node found in the namspace beginning at \a rootNode.
-  If it finds another namespace node in the child list of \a rootNode,
-  it calls itself recursively. For each child of \a rootNode that is a
-  class node, it calls the other resolveInheritance() function.
+  This function resolves C++ inheritance and reimplementation
+  settings for each C++ class node found in the tree beginning
+  at \a n. It also calls itself recursively for each C++ class
+  node or namespace node it encounters. For each child of \a n
+  that is a class node, it calls resolveInheritanceHelper().
 
   This function does not resolve QML inheritance.
  */
-void Tree::resolveInheritance(NamespaceNode* rootNode)
+void Tree::resolveInheritance(InnerNode* n)
 {
-    if (!rootNode)
-        rootNode = root();
+    if (!n)
+        n = root();
 
     for (int pass = 0; pass < 2; pass++) {
-        NodeList::ConstIterator c = rootNode->childNodes().constBegin();
-        while (c != rootNode->childNodes().constEnd()) {
+        NodeList::ConstIterator c = n->childNodes().constBegin();
+        while (c != n->childNodes().constEnd()) {
             if ((*c)->type() == Node::Class) {
-                resolveInheritance(pass, (ClassNode*)* c);
+                resolveInheritanceHelper(pass, (ClassNode*)*c);
+                resolveInheritance((ClassNode*)*c);
             }
             else if ((*c)->type() == Node::Namespace) {
                 NamespaceNode* ns = static_cast<NamespaceNode*>(*c);
@@ -427,8 +335,73 @@ void Tree::resolveInheritance(NamespaceNode* rootNode)
             }
             ++c;
         }
-        if (rootNode == root())
-            unresolvedInheritanceMap.clear();
+    }
+}
+
+/*!
+  This function is run twice for eachclass node \a cn in the
+  tree. First it is run with \a pass set to 0 for each
+ class node \a cn. Then it is run with \a pass set to 1 for
+  eachclass node \a cn.
+
+  In \a pass 0, all the base classes ofclass node \a cn are
+  found and added to the base class list forclass node \a cn.
+
+  In \a pass 1, each child ofclass node \a cn that is a function
+  that is reimplemented from one of the base classes is marked
+  as being reimplemented from that class.
+
+  Some property node fixing up is also done in \a pass 1.
+ */
+void Tree::resolveInheritanceHelper(int pass, ClassNode* cn)
+{
+    if (pass == 0) {
+        QList<RelatedClass>& bases = cn->baseClasses();
+        QList<RelatedClass>::iterator b = bases.begin();
+        while (b != bases.end()) {
+            if (!(*b).node_) {
+                Node* n = qdb_->findClassNode((*b).path_);
+#if 0
+                /*
+                  If the node for the base class was not found,
+                  the reason might be that the subclass is in a
+                  namespace and the base class is in the same
+                  namespace, but the base class name was not
+                  qualified with the namespace name. That is the
+                  case most of the time. Then restart the search
+                  at the parent of the subclass node (the namespace
+                  node) using the unqualified base class name.
+                 */
+                if (!n) {
+                    InnerNode* parent = cn->parent();
+                    n = findClassNode((*b).path_, parent);
+                }
+#endif
+                if (n) {
+                    ClassNode* bcn = static_cast<ClassNode*>(n);
+                    (*b).node_ = bcn;
+                    bcn->addDerivedClass((*b).access_, cn);
+                }
+            }
+            ++b;
+        }
+    }
+    else {
+        NodeList::ConstIterator c = cn->childNodes().constBegin();
+        while (c != cn->childNodes().constEnd()) {
+            if ((*c)->type() == Node::Function) {
+                FunctionNode* func = (FunctionNode*)* c;
+                FunctionNode* from = findVirtualFunctionInBaseClasses(cn, func);
+                if (from != 0) {
+                    if (func->virtualness() == FunctionNode::NonVirtual)
+                        func->setVirtualness(FunctionNode::ImpureVirtual);
+                    func->setReimplementedFrom(from);
+                }
+            }
+            else if ((*c)->type() == Node::Property)
+                cn->fixPropertyUsingBaseClasses(static_cast<PropertyNode*>(*c));
+            ++c;
+        }
     }
 }
 
@@ -486,57 +459,6 @@ void Tree::resolveProperties()
 }
 
 /*!
-  This function is run twice for each \a classNode in the
-  tree. First it is run with \a pass set to 0 for each
-  \a classNode. Then it is run with \a pass set to 1 for
-  each \a classNode.
-
-  In \a pass 0, all the base classes of \a classNode are
-  found and added to the base class list for \a classNode.
-
-  In \a pass 1, each child of \a classNode that is a function
-  that is reimplemented from one of the base classes is marked
-  as being reimplemented from that class.
-
-  Some property node fixing up is also done in \a pass 1.
- */
-void Tree::resolveInheritance(int pass, ClassNode* classNode)
-{
-    if (pass == 0) {
-        QList<InheritanceBound> bounds = unresolvedInheritanceMap[classNode];
-        QList<InheritanceBound>::ConstIterator b = bounds.constBegin();
-        while (b != bounds.constEnd()) {
-            Node* n = findClassNode((*b).basePath);
-            if (!n && (*b).parent) {
-                n = findClassNode((*b).basePath, (*b).parent);
-            }
-            if (n) {
-                classNode->addBaseClass((*b).access, static_cast<ClassNode*>(n), (*b).dataTypeWithTemplateArgs);
-            }
-            ++b;
-        }
-    }
-    else {
-        NodeList::ConstIterator c = classNode->childNodes().constBegin();
-        while (c != classNode->childNodes().constEnd()) {
-            if ((*c)->type() == Node::Function) {
-                FunctionNode* func = (FunctionNode*)* c;
-                FunctionNode* from = findVirtualFunctionInBaseClasses(classNode, func);
-                if (from != 0) {
-                    if (func->virtualness() == FunctionNode::NonVirtual)
-                        func->setVirtualness(FunctionNode::ImpureVirtual);
-                    func->setReimplementedFrom(from);
-                }
-            }
-            else if ((*c)->type() == Node::Property) {
-                fixPropertyUsingBaseClasses(classNode, static_cast<PropertyNode*>(*c));
-            }
-            ++c;
-        }
-    }
-}
-
-/*!
   For each QML class node that points to a C++ class node,
   follow its C++ class node pointer and set the C++ class
   node's QML class node pointer back to the QML class node.
@@ -545,7 +467,7 @@ void Tree::resolveCppToQmlLinks()
 {
 
     foreach (Node* child, root_.childNodes()) {
-        if (child->type() == Node::Document && child->subType() == Node::QmlClass) {
+        if (child->isQmlType()) {
             QmlClassNode* qcn = static_cast<QmlClassNode*>(child);
             ClassNode* cn = const_cast<ClassNode*>(qcn->classNode());
             if (cn)
@@ -575,16 +497,18 @@ void Tree::fixInheritance(NamespaceNode* rootNode)
 
 /*!
  */
-FunctionNode* Tree::findVirtualFunctionInBaseClasses(ClassNode* classNode,
-                                                     FunctionNode* clone)
+FunctionNode* Tree::findVirtualFunctionInBaseClasses(ClassNode* cn, FunctionNode* clone)
 {
-    QList<RelatedClass>::ConstIterator r = classNode->baseClasses().constBegin();
-    while (r != classNode->baseClasses().constEnd()) {
+    const QList<RelatedClass>& rc = cn->baseClasses();
+    QList<RelatedClass>::ConstIterator r = rc.constBegin();
+    while (r != rc.constEnd()) {
         FunctionNode* func;
-        if (((func = findVirtualFunctionInBaseClasses((*r).node, clone)) != 0 ||
-             (func = (*r).node->findFunctionNode(clone)) != 0)) {
-            if (func->virtualness() != FunctionNode::NonVirtual)
-                return func;
+        if ((*r).node_) {
+            if (((func = findVirtualFunctionInBaseClasses((*r).node_, clone)) != 0 ||
+                 (func = (*r).node_->findFunctionNode(clone)) != 0)) {
+                if (func->virtualness() != FunctionNode::NonVirtual)
+                    return func;
+            }
         }
         ++r;
     }
@@ -593,31 +517,14 @@ FunctionNode* Tree::findVirtualFunctionInBaseClasses(ClassNode* classNode,
 
 /*!
  */
-void Tree::fixPropertyUsingBaseClasses(ClassNode* classNode, PropertyNode* property)
-{
-    QList<RelatedClass>::const_iterator r = classNode->baseClasses().constBegin();
-    while (r != classNode->baseClasses().constEnd()) {
-        Node* n = r->node->findChildNodeByNameAndType(property->name(), Node::Property);
-        if (n) {
-            PropertyNode* baseProperty = static_cast<PropertyNode*>(n);
-            fixPropertyUsingBaseClasses(r->node, baseProperty);
-            property->setOverriddenFrom(baseProperty);
-        }
-        else {
-            fixPropertyUsingBaseClasses(r->node, property);
-        }
-        ++r;
-    }
-}
-
-/*!
- */
 NodeList Tree::allBaseClasses(const ClassNode* classNode) const
 {
     NodeList result;
     foreach (const RelatedClass& r, classNode->baseClasses()) {
-        result += r.node;
-        result += allBaseClasses(r.node);
+        if (r.node_) {
+            result += r.node_;
+            result += allBaseClasses(r.node_);
+        }
     }
     return result;
 }
@@ -629,16 +536,9 @@ NodeList Tree::allBaseClasses(const ClassNode* classNode) const
   search at the tree root. \a subtype is not used unless
   \a type is \c{Document}.
  */
-Node* Tree::findNodeByNameAndType(const QStringList& path,
-                                  Node::Type type,
-                                  Node::SubType subtype,
-                                  Node* start,
-                                  bool acceptCollision)
+Node* Tree::findNodeByNameAndType(const QStringList& path, Node::Type type) const
 {
-    if (!start)
-        start = const_cast<NamespaceNode*>(root());
-    Node* result = findNodeRecursive(path, 0, start, type, subtype, acceptCollision);
-    return result;
+    return findNodeRecursive(path, 0, root(), type);
 }
 
 /*!
@@ -659,22 +559,19 @@ Node* Tree::findNodeByNameAndType(const QStringList& path,
  */
 Node* Tree::findNodeRecursive(const QStringList& path,
                               int pathIndex,
-                              Node* start,
-                              Node::Type type,
-                              Node::SubType subtype,
-                              bool acceptCollision) const
+                              const Node* start,
+                              Node::Type type) const
 {
     if (!start || path.isEmpty())
         return 0; // no place to start, or nothing to search for.
+    Node* node = const_cast<Node*>(start);
     if (start->isLeaf()) {
         if (pathIndex >= path.size())
-            return start; // found a match.
+            return node; // found a match.
         return 0; // premature leaf
     }
-    if (pathIndex >= path.size())
-        return 0; // end of search path.
 
-    InnerNode* current = static_cast<InnerNode*>(start);
+    InnerNode* current = static_cast<InnerNode*>(node);
     const NodeList& children = current->childNodes();
     const QString& name = path.at(pathIndex);
     for (int i=0; i<children.size(); ++i) {
@@ -683,79 +580,818 @@ Node* Tree::findNodeRecursive(const QStringList& path,
             continue;
         if (n->isQmlPropertyGroup()) {
             if (type == Node::QmlProperty) {
-                n = findNodeRecursive(path, pathIndex, n, type, subtype);
+                n = findNodeRecursive(path, pathIndex, n, type);
                 if (n)
                     return n;
             }
         }
         else if (n->name() == name) {
             if (pathIndex+1 >= path.size()) {
-                if (n->type() == type) {
-                    if (type == Node::Document) {
-                        if (n->subType() == subtype)
-                            return n;
-                        else if (n->subType() == Node::Collision && acceptCollision)
-                            return n;
-                        else if (subtype == Node::NoSubType)
-                            return n; // don't care what subtype is.
+                if ((n->type() == type) || (type == Node::NoType))
+                    return n;
+                continue;
+            }
+            else { // Search the children of n for the next name in the path.
+                n = findNodeRecursive(path, pathIndex+1, n, type);
+                if (n)
+                    return n;
+            }
+        }
+    }
+    return 0;
+}
+
+/*!
+  Recursive search for a node identified by \a path. Each
+  path element is a name. \a pathIndex specifies the index
+  of the name in \a path to try to match. \a start is the
+  node whose children shoulod be searched for one that has
+  that name. Each time a name match is found, increment the
+  \a pathIndex and call this function recursively.
+
+  If the end of the path is reached (i.e. if a matching
+  node is found for each name in the \a path), test the
+  matching node's type and subtype values against the ones
+  listed in \a types. If a match is found there, return the
+  pointer to the final node. Otherwise return 0.
+ */
+Node* Tree::findNodeRecursive(const QStringList& path,
+                              int pathIndex,
+                              Node* start,
+                              const NodeTypeList& types) const
+{
+    if (!start || path.isEmpty())
+        return 0;
+    if (start->isLeaf())
+        return ((pathIndex >= path.size()) ? start : 0);
+    if (pathIndex >= path.size())
+        return 0;
+
+    InnerNode* current = static_cast<InnerNode*>(start);
+    const NodeList& children = current->childNodes();
+    for (int i=0; i<children.size(); ++i) {
+        Node* n = children.at(i);
+        if (n && n->name() == path.at(pathIndex)) {
+            if (pathIndex+1 >= path.size()) {
+                if (n->match(types))
+                    return n;
+            }
+            else if (!n->isLeaf()) {
+                n = findNodeRecursive(path, pathIndex+1, n, types);
+                if (n)
+                    return n;
+            }
+        }
+    }
+    return 0;
+}
+
+/*!
+  Searches the tree for a node that matches the \a path plus
+  the \a target. The search begins at \a start and moves up
+  the parent chain from there, or, if \a start is 0, the search
+  begins at the root.
+
+  The \a flags can indicate whether to search base classes and/or
+  the enum values in enum types. \a genus can be a further restriction
+  on what kind of node is an acceptible match, i.e. CPP or QML.
+
+  If a matching node is found, \a ref is an output parameter that
+  is set to the HTML reference to use for the link.
+ */
+const Node* Tree::findNodeForTarget(const QStringList& path,
+                                    const QString& target,
+                                    const Node* start,
+                                    int flags,
+                                    Node::Genus genus,
+                                    QString& ref) const
+{
+    const Node* node = 0;
+    QString p;
+    if (path.size() > 1)
+        p = path.join(QString("::"));
+    else {
+        p = path.at(0);
+        node = findDocNodeByTitle(p);
+        if (node) {
+            if (!target.isEmpty()) {
+                ref = getRef(target, node);
+                if (ref.isEmpty())
+                    node = 0;
+            }
+            if (node)
+                return node;
+        }
+    }
+    node = findUnambiguousTarget(p, ref);
+    if (node) {
+        if (!target.isEmpty()) {
+            ref = getRef(target, node);
+            if (ref.isEmpty())
+                node = 0;
+        }
+        if (node)
+            return node;
+    }
+
+    const Node* current = start;
+    if (!current)
+        current = root();
+
+    /*
+      If the path contains one or two double colons ("::"),
+      check first to see if the first two path strings refer
+      to a QML element. If they do, path[0] will be the QML
+      module identifier, and path[1] will be the QML type.
+      If the answer is yes, the reference identifies a QML
+      type node.
+    */
+    int path_idx = 0;
+    if ((genus != Node::CPP) && (path.size() >= 2) && !path[0].isEmpty()) {
+        QmlClassNode* qcn = lookupQmlType(QString(path[0] + "::" + path[1]));
+        if (qcn) {
+            current = qcn;
+            if (path.size() == 2) {
+                if (!target.isEmpty()) {
+                    ref = getRef(target, current);
+                    if (!ref.isEmpty())
+                        return current;
+                    else if (genus == Node::QML)
                         return 0;
+                }
+                else
+                    return current;
+            }
+            path_idx = 2;
+        }
+    }
+
+    while (current) {
+        if (current->isInnerNode()) {
+            const Node* node = matchPathAndTarget(path, path_idx, target, current, flags, genus, ref);
+            if (node)
+                return node;
+        }
+        current = current->parent();
+        path_idx = 0;
+    }
+    return 0;
+}
+
+/*!
+  First, the \a path is used to find a node. The \a path
+  matches some part of the node's fully quallified name.
+  If the \a target is not empty, it must match a target
+  in the matching node. If the matching of the \a path
+  and the \a target (if present) is successful, \a ref
+  is set from the \a target, and the pointer to the
+  matching node is returned. \a idx is the index into the
+  \a path where to begin the matching. The function is
+  recursive with idx being incremented for each recursive
+  call.
+
+  The matching node must be of the correct \a genus, i.e.
+  either QML or C++, but \a genus can be set to \c DontCare.
+  \a flags indicates whether to search base classes and
+  whether to search for an enum value. \a node points to
+  the node where the search should begin, assuming the
+  \a path is a not a fully-qualified name. \a node is
+  most often the root of this Tree.
+ */
+const Node* Tree::matchPathAndTarget(const QStringList& path,
+                                     int idx,
+                                     const QString& target,
+                                     const Node* node,
+                                     int flags,
+                                     Node::Genus genus,
+                                     QString& ref) const
+{
+    /*
+      If the path has been matched, then if there is a target,
+      try to match the target. If there is a target, but you
+      can't match it at the end of the path, give up; return 0.
+     */
+    if (idx == path.size()) {
+        if (!target.isEmpty()) {
+            ref = getRef(target, node);
+            if (ref.isEmpty())
+                return 0;
+        }
+        if (node->isFunction() && node->name() == node->parent()->name())
+            node = node->parent();
+        return node;
+    }
+
+    const Node* t = 0;
+    QString name = path.at(idx);
+    QList<Node*> nodes;
+    node->findChildren(name, nodes);
+
+    foreach (const Node* n, nodes) {
+        if (genus != Node::DontCare) {
+            if (n->genus() != genus)
+                continue;
+        }
+        t = matchPathAndTarget(path, idx+1, target, n, flags, genus, ref);
+        if (t && !t->isPrivate())
+            return t;
+    }
+    if (target.isEmpty()) {
+        if ((idx) == (path.size()-1) && node->isInnerNode() && (flags & SearchEnumValues)) {
+            t = static_cast<const InnerNode*>(node)->findEnumNodeForValue(path.at(idx));
+            if (t)
+                return t;
+        }
+    }
+    if ((genus != Node::QML) && node->isClass() && (flags & SearchBaseClasses)) {
+        NodeList baseClasses = allBaseClasses(static_cast<const ClassNode*>(node));
+        foreach (const Node* bc, baseClasses) {
+            t = matchPathAndTarget(path, idx, target, bc, flags, genus, ref);
+            if (t && ! t->isPrivate())
+                return t;
+            if (target.isEmpty()) {
+                if ((idx) == (path.size()-1) && (flags & SearchEnumValues)) {
+                    t = static_cast<const InnerNode*>(bc)->findEnumNodeForValue(path.at(idx));
+                    if (t)
+                        return t;
+                }
+            }
+        }
+    }
+    return 0;
+}
+
+/*!
+  Searches the tree for a node that matches the \a path. The
+  search begins at \a start but can move up the parent chain
+  recursively if no match is found.
+
+  This findNode() callse the other findNode(), which is not
+  called anywhere else.
+ */
+const Node* Tree::findNode(const QStringList& path,
+                           const Node* start,
+                           int findFlags,
+                           Node::Genus genus) const
+{
+    const Node* current = start;
+    if (!current)
+        current = root();
+
+    do {
+        const Node* node = current;
+        int i;
+        int start_idx = 0;
+
+        /*
+          If the path contains one or two double colons ("::"),
+          check first to see if the first two path strings refer
+          to a QML element. If they do, path[0] will be the QML
+          module identifier, and path[1] will be the QML type.
+          If the answer is yes, the reference identifies a QML
+          type node.
+        */
+        if ((genus != Node::CPP) && (path.size() >= 2) && !path[0].isEmpty()) {
+            QmlClassNode* qcn = lookupQmlType(QString(path[0] + "::" + path[1]));
+            if (qcn) {
+                node = qcn;
+                if (path.size() == 2)
+                    return node;
+                start_idx = 2;
+            }
+        }
+
+        for (i = start_idx; i < path.size(); ++i) {
+            if (node == 0 || !node->isInnerNode())
+                break;
+
+            const Node* next = static_cast<const InnerNode*>(node)->findChildNode(path.at(i), genus);
+            if (!next && (findFlags & SearchEnumValues) && i == path.size()-1) {
+                next = static_cast<const InnerNode*>(node)->findEnumNodeForValue(path.at(i));
+            }
+            if (!next && (genus != Node::QML) && node->isClass() && (findFlags & SearchBaseClasses)) {
+                NodeList baseClasses = allBaseClasses(static_cast<const ClassNode*>(node));
+                foreach (const Node* baseClass, baseClasses) {
+                    next = static_cast<const InnerNode*>(baseClass)->findChildNode(path.at(i), genus);
+                    if (!next && (findFlags & SearchEnumValues) && i == path.size() - 1)
+                        next = static_cast<const InnerNode*>(baseClass)->findEnumNodeForValue(path.at(i));
+                    if (next) {
+                        break;
+                    }
+                }
+            }
+            node = next;
+        }
+        if (node && i == path.size())
+            return node;
+        current = current->parent();
+    } while (current);
+
+    return 0;
+}
+
+/*!
+  This function searches for a node with a canonical title
+  constructed from \a target. If the node it finds is \a node,
+  it returns the ref from that node. Otherwise it returns an
+  empty string.
+ */
+QString Tree::getRef(const QString& target, const Node* node) const
+{
+    TargetMap::const_iterator i = nodesByTargetTitle_.constFind(target);
+    if (i != nodesByTargetTitle_.constEnd()) {
+        do {
+            if (i.value()->node_ == node)
+                return i.value()->ref_;
+            ++i;
+        } while (i != nodesByTargetTitle_.constEnd() && i.key() == target);
+    }
+    QString key = Doc::canonicalTitle(target);
+    i = nodesByTargetRef_.constFind(key);
+    if (i != nodesByTargetRef_.constEnd()) {
+        do {
+            if (i.value()->node_ == node)
+                return i.value()->ref_;
+            ++i;
+        } while (i != nodesByTargetRef_.constEnd() && i.key() == key);
+    }
+    return QString();
+}
+
+/*!
+  Inserts a new target into the target table. \a name is the
+  key. The target record contains the \a type, a pointer to
+  the \a node, the \a priority. and a canonicalized form of
+  the \a name, which is later used.
+ */
+void Tree::insertTarget(const QString& name,
+                        const QString& title,
+                        TargetRec::Type type,
+                        Node* node,
+                        int priority)
+{
+    TargetRec* target = new TargetRec(name, title, type, node, priority);
+    nodesByTargetRef_.insert(name, target);
+    nodesByTargetTitle_.insert(title, target);
+}
+
+/*!
+ */
+void Tree::resolveTargets(InnerNode* root)
+{
+    // need recursion
+    foreach (Node* child, root->childNodes()) {
+        if (child->type() == Node::Document) {
+            DocNode* node = static_cast<DocNode*>(child);
+            QString key = node->title();
+            if (!key.isEmpty()) {
+                if (key.contains(QChar(' ')))
+                    key = Doc::canonicalTitle(key);
+                QList<DocNode*> nodes = docNodesByTitle_.values(key);
+                bool alreadyThere = false;
+                if (!nodes.empty()) {
+                    for (int i=0; i< nodes.size(); ++i) {
+                        if (nodes[i]->subType() == Node::ExternalPage) {
+                            if (node->name() == nodes[i]->name()) {
+                                alreadyThere = true;
+                                break;
+                            }
+                        }
                     }
-                    else
-                        return n;
                 }
-                else if (n->isCollisionNode()) {
-                    if (acceptCollision)
-                        return n;
-                    return findNodeRecursive(path, pathIndex, n, type, subtype);
+                if (!alreadyThere)
+                    docNodesByTitle_.insert(key, node);
+            }
+        }
+
+        if (child->doc().hasTableOfContents()) {
+            const QList<Atom*>& toc = child->doc().tableOfContents();
+            for (int i = 0; i < toc.size(); ++i) {
+                QString ref = refForAtom(toc.at(i));
+                QString title = Text::sectionHeading(toc.at(i)).toString();
+                if (!ref.isEmpty() && !title.isEmpty()) {
+                    QString key = Doc::canonicalTitle(title);
+                    TargetRec* target = new TargetRec(ref, title, TargetRec::Contents, child, 3);
+                    nodesByTargetRef_.insert(key, target);
+                    nodesByTargetTitle_.insert(title, target);
                 }
-                else
-                    return 0;
             }
-            else { // Not at the end of the path.
-                n = findNodeRecursive(path, pathIndex+1, n, type, subtype);
-                if (n)
-                    return n;
+        }
+        if (child->doc().hasKeywords()) {
+            const QList<Atom*>& keywords = child->doc().keywords();
+            for (int i = 0; i < keywords.size(); ++i) {
+                QString ref = refForAtom(keywords.at(i));
+                QString title = keywords.at(i)->string();
+                if (!ref.isEmpty() && !title.isEmpty()) {
+                    QString key = Doc::canonicalTitle(title);
+                    TargetRec* target = new TargetRec(ref, title, TargetRec::Keyword, child, 1);
+                    nodesByTargetRef_.insert(key, target);
+                    nodesByTargetTitle_.insert(title, target);
+                }
+            }
+        }
+        if (child->doc().hasTargets()) {
+            const QList<Atom*>& targets = child->doc().targets();
+            for (int i = 0; i < targets.size(); ++i) {
+                QString ref = refForAtom(targets.at(i));
+                QString title = targets.at(i)->string();
+                if (!ref.isEmpty() && !title.isEmpty()) {
+                    QString key = Doc::canonicalTitle(title);
+                    TargetRec* target = new TargetRec(ref, title, TargetRec::Target, child, 2);
+                    nodesByTargetRef_.insert(key, target);
+                    nodesByTargetTitle_.insert(title, target);
+                }
             }
         }
     }
+}
+
+/*!
+  This function searches for a \a target anchor node. If it
+  finds one, it sets \a ref and returns the found node.
+ */
+const Node*
+Tree::findUnambiguousTarget(const QString& target, QString& ref) const
+{
+    int numBestTargets = 0;
+    TargetRec* bestTarget = 0;
+    QList<TargetRec*> bestTargetList;
+
+    QString key = target;
+    TargetMap::const_iterator i = nodesByTargetTitle_.find(key);
+    while (i != nodesByTargetTitle_.constEnd()) {
+        if (i.key() != key)
+            break;
+        TargetRec* candidate = i.value();
+        if (!bestTarget || (candidate->priority_ < bestTarget->priority_)) {
+            bestTarget = candidate;
+            bestTargetList.clear();
+            bestTargetList.append(candidate);
+            numBestTargets = 1;
+        } else if (candidate->priority_ == bestTarget->priority_) {
+            bestTargetList.append(candidate);
+            ++numBestTargets;
+        }
+        ++i;
+    }
+    if (bestTarget) {
+        ref = bestTarget->ref_;
+        return bestTarget->node_;
+    }
+
+    numBestTargets = 0;
+    bestTarget = 0;
+    key = Doc::canonicalTitle(target);
+    i = nodesByTargetRef_.find(key);
+    while (i != nodesByTargetRef_.constEnd()) {
+        if (i.key() != key)
+            break;
+        TargetRec* candidate = i.value();
+        if (!bestTarget || (candidate->priority_ < bestTarget->priority_)) {
+            bestTarget = candidate;
+            bestTargetList.clear();
+            bestTargetList.append(candidate);
+            numBestTargets = 1;
+        } else if (candidate->priority_ == bestTarget->priority_) {
+            bestTargetList.append(candidate);
+            ++numBestTargets;
+        }
+        ++i;
+    }
+    if (bestTarget) {
+        ref = bestTarget->ref_;
+        return bestTarget->node_;
+    }
+
+    ref.clear();
     return 0;
 }
 
 /*!
-  Find the Enum type node named \a path. Begin the search at the
-  \a start node. If the \a start node is 0, begin the search
-  at the root of the tree. Only an Enum type node named \a path is
-  acceptible. If one is not found, 0 is returned.
+  This function searches for a node with the specified \a title.
  */
-EnumNode* Tree::findEnumNode(const QStringList& path, Node* start)
+const DocNode* Tree::findDocNodeByTitle(const QString& title) const
 {
-    if (!start)
-        start = const_cast<NamespaceNode*>(root());
-    return static_cast<EnumNode*>(findNodeRecursive(path, 0, start, Node::Enum, Node::NoSubType));
+    DocNodeMultiMap::const_iterator i;
+    if (title.contains(QChar(' ')))
+        i = docNodesByTitle_.constFind(Doc::canonicalTitle(title));
+    else
+        i = docNodesByTitle_.constFind(title);
+    if (i != docNodesByTitle_.constEnd()) {
+        /*
+          Reporting all these duplicate section titles is probably
+          overkill. We should report the duplicate file and let
+          that suffice.
+        */
+        DocNodeMultiMap::const_iterator j = i;
+        ++j;
+        if (j != docNodesByTitle_.constEnd() && j.key() == i.key()) {
+            QList<Location> internalLocations;
+            while (j != docNodesByTitle_.constEnd()) {
+                if (j.key() == i.key() && j.value()->url().isEmpty()) {
+                    internalLocations.append(j.value()->location());
+                    break; // Just report one duplicate for now.
+                }
+                ++j;
+            }
+            if (internalLocations.size() > 0) {
+                i.value()->location().warning("This page title exists in more than one file: " + title);
+                foreach (const Location &location, internalLocations)
+                    location.warning("[It also exists here]");
+            }
+        }
+        return i.value();
+    }
+    return 0;
 }
 
 /*!
-  Find the C++ class node named \a path. Begin the search at the
-  \a start node. If the \a start node is 0, begin the search
-  at the root of the tree. Only a C++ class node named \a path is
-  acceptible. If one is not found, 0 is returned.
+  Returns a canonical title for the \a atom, if the \a atom
+  is a SectionLeft or a Target.
  */
-ClassNode* Tree::findClassNode(const QStringList& path, Node* start) const
+QString Tree::refForAtom(const Atom* atom)
 {
-    if (!start)
-        start = const_cast<NamespaceNode*>(root());
-    return static_cast<ClassNode*>(findNodeRecursive(path, 0, start, Node::Class, Node::NoSubType));
+    if (atom) {
+        if (atom->type() == Atom::SectionLeft)
+            return Doc::canonicalTitle(Text::sectionHeading(atom).toString());
+        if (atom->type() == Atom::Target)
+            return Doc::canonicalTitle(atom->string());
+    }
+    return QString();
 }
 
 /*!
-  Find the Namespace node named \a path. Begin the search at
-  the root of the tree. Only a Namespace node named \a path
-  is acceptible. If one is not found, 0 is returned.
+  \fn const CNMap& Tree::groups() const
+  Returns a const reference to the collection of all
+  group nodes.
+*/
+
+/*!
+  \fn const ModuleMap& Tree::modules() const
+  Returns a const reference to the collection of all
+  module nodes.
+*/
+
+/*!
+  \fn const QmlModuleMap& Tree::qmlModules() const
+  Returns a const reference to the collection of all
+  QML module nodes.
+*/
+
+/*!
+  Returns the collection node in this tree that has the same
+  name and type as \a cn. Returns 0 if no match is found.
+
+  If the matching node is \a cn, return 0.
  */
-NamespaceNode* Tree::findNamespaceNode(const QStringList& path) const
+CollectionNode* Tree::getCorrespondingCollection(CollectionNode* cn)
 {
-    Node* start = const_cast<NamespaceNode*>(root());
-    return static_cast<NamespaceNode*>(findNodeRecursive(path, 0, start, Node::Namespace, Node::NoSubType));
+    CollectionNode* ccn = 0;
+    if (cn->isGroup())
+        ccn = getGroup(cn->name());
+    else if (cn->isModule())
+        ccn = getModule(cn->name());
+    else if (cn->isQmlModule())
+        ccn = getQmlModule(cn->name());
+    if (ccn == cn)
+        ccn = 0;
+    return ccn;
+}
+
+/*!
+  Find the group node named \a name and return a pointer
+  to it. If a matching node is not found, return 0.
+ */
+GroupNode* Tree::getGroup(const QString& name)
+{
+    CNMap::const_iterator i = groups_.find(name);
+    if (i != groups_.end())
+        return static_cast<GroupNode*>(i.value());
+    return 0;
+}
+
+/*!
+  Find the module node named \a name and return a pointer
+  to it. If a matching node is not found, return 0.
+ */
+ModuleNode* Tree::getModule(const QString& name)
+{
+    CNMap::const_iterator i = modules_.find(name);
+    if (i != modules_.end())
+        return static_cast<ModuleNode*>(i.value());
+    return 0;
+}
+
+/*!
+  Find the QML module node named \a name and return a pointer
+  to it. If a matching node is not found, return 0.
+ */
+QmlModuleNode* Tree::getQmlModule(const QString& name)
+{
+    CNMap::const_iterator i = qmlModules_.find(name);
+    if (i != qmlModules_.end())
+        return static_cast<QmlModuleNode*>(i.value());
+    return 0;
+}
+
+/*!
+  Find the group node named \a name and return a pointer
+  to it. If the group node is not found, add a new group
+  node named \a name and return a pointer to the new one.
+
+  If a new group node is added, its parent is the tree root,
+  and the new group node is marked \e{not seen}.
+ */
+GroupNode* Tree::findGroup(const QString& name)
+{
+    CNMap::const_iterator i = groups_.find(name);
+    if (i != groups_.end())
+        return static_cast<GroupNode*>(i.value());;
+    GroupNode* gn = new GroupNode(root(), name);
+    gn->markNotSeen();
+    groups_.insert(name, gn);
+    return gn;
+}
+
+/*!
+  Find the module node named \a name and return a pointer
+  to it. If a matching node is not found, add a new module
+  node named \a name and return a pointer to that one.
+
+  If a new module node is added, its parent is the tree root,
+  and the new module node is marked \e{not seen}.
+ */
+ModuleNode* Tree::findModule(const QString& name)
+{
+    CNMap::const_iterator i = modules_.find(name);
+    if (i != modules_.end())
+        return static_cast<ModuleNode*>(i.value());
+    ModuleNode* mn = new ModuleNode(root(), name);
+    mn->markNotSeen();
+    modules_.insert(name, mn);
+    return mn;
+}
+
+/*!
+  Find the QML module node named \a name and return a pointer
+  to it. If a matching node is not found, add a new QML module
+  node named \a name and return a pointer to that one.
+
+  If a new QML module node is added, its parent is the tree root,
+  and the new QML module node is marked \e{not seen}.
+ */
+QmlModuleNode* Tree::findQmlModule(const QString& name)
+{
+    CNMap::const_iterator i = qmlModules_.find(name);
+    if (i != qmlModules_.end())
+        return static_cast<QmlModuleNode*>(i.value());
+    QmlModuleNode* qmn = new QmlModuleNode(root(), name);
+    qmn->markNotSeen();
+    qmn->setQmlModuleInfo(name);
+    qmlModules_.insert(name, qmn);
+    return qmn;
+}
+
+/*!
+  Looks up the group node named \a name in the collection
+  of all group nodes. If a match is found, a pointer to the
+  node is returned. Otherwise, a new group node named \a name
+  is created and inserted into the collection, and the pointer
+  to that node is returned.
+ */
+GroupNode* Tree::addGroup(const QString& name)
+{
+    GroupNode* group = findGroup(name);
+    return group;
+}
+
+/*!
+  Looks up the module node named \a name in the collection
+  of all module nodes. If a match is found, a pointer to the
+  node is returned. Otherwise, a new module node named \a name
+  is created and inserted into the collection, and the pointer
+  to that node is returned.
+ */
+ModuleNode* Tree::addModule(const QString& name)
+{
+    ModuleNode* module = findModule(name);
+    return module;
+}
+
+/*!
+  Looks up the QML module node named \a name in the collection
+  of all QML module nodes. If a match is found, a pointer to the
+  node is returned. Otherwise, a new QML module node named \a name
+  is created and inserted into the collection, and the pointer
+  to that node is returned.
+ */
+QmlModuleNode* Tree::addQmlModule(const QString& name)
+{
+    QStringList blankSplit = name.split(QLatin1Char(' '));
+    QmlModuleNode* qmn = findQmlModule(blankSplit[0]);
+    qmn->setQmlModuleInfo(name);
+    return qmn;
+}
+
+/*!
+  Looks up the group node named \a name in the collection
+  of all group nodes. If a match is not found, a new group
+  node named \a name is created and inserted into the collection.
+  Then append \a node to the group's members list, and append the
+  group name to the list of group names in \a node. The parent of
+  \a node is not changed by this function. Returns a pointer to
+  the group node.
+ */
+GroupNode* Tree::addToGroup(const QString& name, Node* node)
+{
+    GroupNode* gn = findGroup(name);
+    if (!node->isInternal()) {
+        gn->addMember(node);
+        node->appendGroupName(name);
+    }
+    return gn;
+}
+
+/*!
+  Looks up the module node named \a name in the collection
+  of all module nodes. If a match is not found, a new module
+  node named \a name is created and inserted into the collection.
+  Then append \a node to the module's members list. The parent of
+  \a node is not changed by this function. Returns the module node.
+ */
+ModuleNode* Tree::addToModule(const QString& name, Node* node)
+{
+    ModuleNode* mn = findModule(name);
+    mn->addMember(node);
+    node->setModuleName(name);
+    return mn;
+}
+
+/*!
+  Looks up the QML module named \a name. If it isn't there,
+  create it. Then append \a node to the QML module's member
+  list. The parent of \a node is not changed by this function.
+  Returns the pointer to the QML module node.
+ */
+QmlModuleNode* Tree::addToQmlModule(const QString& name, Node* node)
+{
+    QStringList qmid;
+    QStringList dotSplit;
+    QStringList blankSplit = name.split(QLatin1Char(' '));
+    qmid.append(blankSplit[0]);
+    if (blankSplit.size() > 1) {
+        qmid.append(blankSplit[0] + blankSplit[1]);
+        dotSplit = blankSplit[1].split(QLatin1Char('.'));
+        qmid.append(blankSplit[0] + dotSplit[0]);
+    }
+
+    QmlModuleNode* qmn = findQmlModule(blankSplit[0]);
+    qmn->addMember(node);
+    node->setQmlModule(qmn);
+    if (node->isQmlType()) {
+        QmlClassNode* n = static_cast<QmlClassNode*>(node);
+        for (int i=0; i<qmid.size(); ++i) {
+            QString key = qmid[i] + "::" + node->name();
+            insertQmlType(key, n);
+        }
+    }
+    return qmn;
+}
+
+/*!
+  If the QML type map does not contain \a key, insert node
+  \a n with the specified \a key.
+ */
+void Tree::insertQmlType(const QString& key, QmlClassNode* n)
+{
+    if (!qmlTypeMap_.contains(key))
+        qmlTypeMap_.insert(key,n);
+}
+
+/*!
+  Split \a target on "::" and find the function node with that
+  path.
+
+  Called in HtmlGenerator, DitaXmlGenerator, and QdocDatabase.
+ */
+const Node* Tree::findFunctionNode(const QString& target, const Node* relative, Node::Genus genus)
+{
+    QString t = target;
+    t.chop(2);
+    QStringList path = t.split("::");
+    const FunctionNode* fn = findFunctionNode(path, relative, SearchBaseClasses, genus);
+    if (fn && fn->metaness() != FunctionNode::MacroWithoutParams)
+        return fn;
+    return 0;
+}
+
+/*!
+  Search for a node that is identified by \a name.
+  Return a pointer to a matching node, or 0.
+*/
+const Node* Tree::checkForCollision(const QString& name)
+{
+    return findNode(QStringList(name), 0, 0, Node::DontCare);
 }
 
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/tree.h b/src/tools/qdoc/tree.h
index 26dd982abd..6bb13ee327 100644
--- a/src/tools/qdoc/tree.h
+++ b/src/tools/qdoc/tree.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,6 +38,7 @@
 #ifndef TREE_H
 #define TREE_H
 
+#include <QtCore/qstack.h>
 #include "node.h"
 
 QT_BEGIN_NAMESPACE
@@ -53,81 +46,97 @@ QT_BEGIN_NAMESPACE
 class QStringList;
 class QDocDatabase;
 
+struct TargetRec
+{
+  public:
+    enum Type { Unknown, Target, Keyword, Contents, Class, Function, Page, Subtitle };
+
+    TargetRec(const QString& name,
+              const QString& title,
+              TargetRec::Type type,
+              Node* node,
+              int priority)
+    : node_(node), ref_(name), title_(title), priority_(priority), type_(type) { }
+
+    bool isEmpty() const { return ref_.isEmpty(); }
+
+    Node* node_;
+    QString ref_;
+    QString title_;
+    int priority_;
+    Type type_;
+};
+
+typedef QMultiMap<QString, TargetRec*> TargetMap;
+typedef QMultiMap<QString, DocNode*> DocNodeMultiMap;
+typedef QMap<QString, QmlClassNode*> QmlTypeMap;
+typedef QMultiMap<QString, const ExampleNode*> ExampleNodeMap;
+
 class Tree
 {
  private:
+    friend class QDocForest;
     friend class QDocDatabase;
 
     typedef QMap<PropertyNode::FunctionRole, QString> RoleMap;
     typedef QMap<PropertyNode*, RoleMap> PropertyMap;
 
-    struct InheritanceBound
-    {
-        Node::Access access;
-        QStringList basePath;
-        QString dataTypeWithTemplateArgs;
-        InnerNode* parent;
-
-      InheritanceBound() : access(Node::Public) { }
-      InheritanceBound(Node::Access access0,
-                       const QStringList& basePath0,
-                       const QString& dataTypeWithTemplateArgs0,
-                       InnerNode* parent)
-          : access(access0), basePath(basePath0),
-            dataTypeWithTemplateArgs(dataTypeWithTemplateArgs0),
-            parent(parent) { }
-    };
-
-    Tree(QDocDatabase* qdb);
+    Tree(const QString& module, QDocDatabase* qdb);
     ~Tree();
 
-    EnumNode* findEnumNode(const QStringList& path, Node* start = 0);
-    ClassNode* findClassNode(const QStringList& path, Node* start = 0) const;
-    QmlClassNode* findQmlTypeNode(const QStringList& path);
+    Node* findNodeForInclude(const QStringList& path) const;
+    ClassNode* findClassNode(const QStringList& path, const Node* start = 0) const;
     NamespaceNode* findNamespaceNode(const QStringList& path) const;
-
-    Node* findNodeByNameAndType(const QStringList& path,
-                                Node::Type type,
-                                Node::SubType subtype,
-                                Node* start,
-                                bool acceptCollision = false);
+    FunctionNode* findFunctionNode(const QStringList& parentPath, const FunctionNode* clone);
+    const Node* findFunctionNode(const QString& target, const Node* relative, Node::Genus genus);
 
     Node* findNodeRecursive(const QStringList& path,
                             int pathIndex,
+                            const Node* start,
+                            Node::Type type) const;
+    Node* findNodeRecursive(const QStringList& path,
+                            int pathIndex,
                             Node* start,
-                            Node::Type type,
-                            Node::SubType subtype,
-                            bool acceptCollision = false) const;
+                            const NodeTypeList& types) const;
+
+    const Node* findNodeForTarget(const QStringList& path,
+                                  const QString& target,
+                                  const Node* node,
+                                  int flags,
+                                  Node::Genus genus,
+                                  QString& ref) const;
+    const Node* matchPathAndTarget(const QStringList& path,
+                                   int idx,
+                                   const QString& target,
+                                   const Node* node,
+                                   int flags,
+                                   Node::Genus genus,
+                                   QString& ref) const;
 
     const Node* findNode(const QStringList &path,
-                         const Node* relative = 0,
-                         int findFlags = 0,
-                         const Node* self=0) const;
-
-    const Node* findNode(const QStringList& path,
-                         const Node* start,
-                         int findFlags,
-                         const Node* self,
-                         bool qml) const;
-
-    NameCollisionNode* checkForCollision(const QString& name) const;
-    NameCollisionNode* findCollisionNode(const QString& name) const;
-    FunctionNode *findFunctionNode(const QStringList &path,
-                                   Node *relative = 0,
-                                   int findFlags = 0);
-    FunctionNode *findFunctionNode(const QStringList &parentPath,
-                                   const FunctionNode *clone,
-                                   Node *relative = 0,
-                                   int findFlags = 0);
-    void addBaseClass(ClassNode *subclass,
-                      Node::Access access,
-                      const QStringList &basePath,
-                      const QString &dataTypeWithTemplateArgs,
-                      InnerNode *parent);
+                         const Node* relative,     // = 0,
+                         int findFlags,            // = 0,
+                         Node::Genus genus) const; // = Node::DontCare) const;
+
+    QmlClassNode* findQmlTypeNode(const QStringList& path);
+
+    Node* findNodeByNameAndType(const QStringList& path, Node::Type type) const;
+    InnerNode* findRelatesNode(const QStringList& path);
+    QString getRef(const QString& target, const Node* node) const;
+    void insertTarget(const QString& name,
+                      const QString& title,
+                      TargetRec::Type type,
+                      Node* node,
+                      int priority);
+    void resolveTargets(InnerNode* root);
+    const Node* findUnambiguousTarget(const QString& target, QString& ref) const;
+    const DocNode* findDocNodeByTitle(const QString& title) const;
+
     void addPropertyFunction(PropertyNode *property,
                              const QString &funcName,
                              PropertyNode::FunctionRole funcRole);
-    void resolveInheritance(NamespaceNode *rootNode = 0);
+    void resolveInheritance(InnerNode* n = 0);
+    void resolveInheritanceHelper(int pass, ClassNode* cn);
     void resolveProperties();
     void resolveCppToQmlLinks();
     void fixInheritance(NamespaceNode *rootNode = 0);
@@ -135,24 +144,66 @@ class Tree
 
     const FunctionNode *findFunctionNode(const QStringList &path,
                                          const Node *relative = 0,
-                                         int findFlags = 0) const;
-    const FunctionNode *findFunctionNode(const QStringList &parentPath,
-                                         const FunctionNode *clone,
-                                         const Node *relative = 0,
-                                         int findFlags = 0) const;
+                                         int findFlags = 0,
+                                         Node::Genus genus = Node::DontCare) const;
     const NamespaceNode *root() const { return &root_; }
 
-    void resolveInheritance(int pass, ClassNode *classe);
     FunctionNode *findVirtualFunctionInBaseClasses(ClassNode *classe,
                                                    FunctionNode *clone);
-    void fixPropertyUsingBaseClasses(ClassNode *classe, PropertyNode *property);
     NodeList allBaseClasses(const ClassNode *classe) const;
+    QString refForAtom(const Atom* atom);
+
+    const CNMap& groups() const { return groups_; }
+    const CNMap& modules() const { return modules_; }
+    const CNMap& qmlModules() const { return qmlModules_; }
+    const CNMap& getCollections(Node::Type t) const {
+        if (t == Node::Group)
+            return groups_;
+        if (t == Node::Module)
+            return modules_;
+        return qmlModules_;
+    }
+
+    CollectionNode* getCorrespondingCollection(CollectionNode* cn);
+
+    GroupNode* getGroup(const QString& name);
+    ModuleNode* getModule(const QString& name);
+    QmlModuleNode* getQmlModule(const QString& name);
+
+    GroupNode* findGroup(const QString& name);
+    ModuleNode* findModule(const QString& name);
+    QmlModuleNode* findQmlModule(const QString& name);
+
+    GroupNode* addGroup(const QString& name);
+    ModuleNode* addModule(const QString& name);
+    QmlModuleNode* addQmlModule(const QString& name);
+
+    GroupNode* addToGroup(const QString& name, Node* node);
+    ModuleNode* addToModule(const QString& name, Node* node);
+    QmlModuleNode* addToQmlModule(const QString& name, Node* node);
+
+    QmlClassNode* lookupQmlType(const QString& name) const { return qmlTypeMap_.value(name); }
+    void insertQmlType(const QString& key, QmlClassNode* n);
+    void addExampleNode(ExampleNode* n) { exampleNodeMap_.insert(n->title(), n); }
+    ExampleNodeMap& exampleNodeMap() { return exampleNodeMap_; }
+    const Node* checkForCollision(const QString& name);
+
+ public:
+    const QString& moduleName() const { return module_; }
 
 private:
+    QString module_;
     QDocDatabase* qdb_;
     NamespaceNode root_;
-    QMap<ClassNode* , QList<InheritanceBound> > unresolvedInheritanceMap;
     PropertyMap unresolvedPropertyMap;
+    DocNodeMultiMap         docNodesByTitle_;
+    TargetMap               nodesByTargetRef_;
+    TargetMap               nodesByTargetTitle_;
+    CNMap                   groups_;
+    CNMap                   modules_;
+    CNMap                   qmlModules_;
+    QmlTypeMap              qmlTypeMap_;
+    ExampleNodeMap          exampleNodeMap_;
 };
 
 QT_END_NAMESPACE
diff --git a/src/tools/qdoc/yyindent.cpp b/src/tools/qdoc/yyindent.cpp
index 9d7a66a55a..8ed9a43e42 100644
--- a/src/tools/qdoc/yyindent.cpp
+++ b/src/tools/qdoc/yyindent.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/compress.cpp b/src/tools/qlalr/compress.cpp
index 4ae0716047..8e4541e7e2 100644
--- a/src/tools/qlalr/compress.cpp
+++ b/src/tools/qlalr/compress.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the test suite module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/compress.h b/src/tools/qlalr/compress.h
index 72f1d1db83..e5c036cb40 100644
--- a/src/tools/qlalr/compress.h
+++ b/src/tools/qlalr/compress.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/cppgenerator.cpp b/src/tools/qlalr/cppgenerator.cpp
index 9bb699108a..05c3c94cc9 100644
--- a/src/tools/qlalr/cppgenerator.cpp
+++ b/src/tools/qlalr/cppgenerator.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QLALR module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,36 +52,28 @@ QString CppGenerator::copyrightHeader() const
     "**\n"
     "** This file is part of the Qt Toolkit.\n"
     "**\n"
-    "** $QT_BEGIN_LICENSE:LGPL$\n"
+    "** $QT_BEGIN_LICENSE:LGPL21$\n"
     "** Commercial License Usage\n"
     "** Licensees holding valid commercial Qt licenses may use this file in\n"
     "** accordance with the commercial license agreement provided with the\n"
     "** Software or, alternatively, in accordance with the terms contained in\n"
-    "** a written agreement between you and Digia.  For licensing terms and\n"
-    "** conditions see http://qt.digia.com/licensing.  For further information\n"
+    "** a written agreement between you and Digia. For licensing terms and\n"
+    "** conditions see http://qt.digia.com/licensing. For further information\n"
     "** use the contact form at http://qt.digia.com/contact-us.\n"
     "**\n"
     "** GNU Lesser General Public License Usage\n"
     "** Alternatively, this file may be used under the terms of the GNU Lesser\n"
-    "** General Public License version 2.1 as published by the Free Software\n"
-    "** Foundation and appearing in the file LICENSE.LGPL included in the\n"
-    "** packaging of this file.  Please review the following information to\n"
-    "** ensure the GNU Lesser General Public License version 2.1 requirements\n"
-    "** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.\n"
+    "** General Public License version 2.1 or version 3 as published by the Free\n"
+    "** Software Foundation and appearing in the file LICENSE.LGPLv21 and\n"
+    "** LICENSE.LGPLv3 included in the packaging of this file. Please review the\n"
+    "** following information to ensure the GNU Lesser General Public License\n"
+    "** requirements will be met: https://www.gnu.org/licenses/lgpl.html and\n"
+    "** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.\n"
     "**\n"
     "** In addition, as a special exception, Digia gives you certain additional\n"
-    "** rights.  These rights are described in the Digia Qt LGPL Exception\n"
+    "** rights. These rights are described in the Digia Qt LGPL Exception\n"
     "** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.\n"
     "**\n"
-    "** GNU General Public License Usage\n"
-    "** Alternatively, this file may be used under the terms of the GNU\n"
-    "** General Public License version 3.0 as published by the Free Software\n"
-    "** Foundation and appearing in the file LICENSE.GPL included in the\n"
-    "** packaging of this file.  Please review the following information to\n"
-    "** ensure the GNU General Public License version 3.0 requirements will be\n"
-    "** met: http://www.gnu.org/copyleft/gpl.html.\n"
-    "**\n"
-    "**\n"
     "** $QT_END_LICENSE$\n"
     "**\n"
     "****************************************************************************/\n"
diff --git a/src/tools/qlalr/cppgenerator.h b/src/tools/qlalr/cppgenerator.h
index 3ee5dc91e3..73098fe7e4 100644
--- a/src/tools/qlalr/cppgenerator.h
+++ b/src/tools/qlalr/cppgenerator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/dotgraph.cpp b/src/tools/qlalr/dotgraph.cpp
index 60ec82ae84..310df9a785 100644
--- a/src/tools/qlalr/dotgraph.cpp
+++ b/src/tools/qlalr/dotgraph.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/dotgraph.h b/src/tools/qlalr/dotgraph.h
index 1d21db060a..c258572a9c 100644
--- a/src/tools/qlalr/dotgraph.h
+++ b/src/tools/qlalr/dotgraph.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/examples/dummy-xml/ll/dummy-xml-ll.cpp b/src/tools/qlalr/examples/dummy-xml/ll/dummy-xml-ll.cpp
index 3d2a09c845..9d49e24237 100644
--- a/src/tools/qlalr/examples/dummy-xml/ll/dummy-xml-ll.cpp
+++ b/src/tools/qlalr/examples/dummy-xml/ll/dummy-xml-ll.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/examples/lambda/main.cpp b/src/tools/qlalr/examples/lambda/main.cpp
index 6c45d48e69..35d2b96b45 100644
--- a/src/tools/qlalr/examples/lambda/main.cpp
+++ b/src/tools/qlalr/examples/lambda/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/examples/qparser/qparser.cpp b/src/tools/qlalr/examples/qparser/qparser.cpp
index d749467fe8..1f81dc1c5e 100644
--- a/src/tools/qlalr/examples/qparser/qparser.cpp
+++ b/src/tools/qlalr/examples/qparser/qparser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/examples/qparser/qparser.h b/src/tools/qlalr/examples/qparser/qparser.h
index a5678d0c33..aab9992e00 100644
--- a/src/tools/qlalr/examples/qparser/qparser.h
+++ b/src/tools/qlalr/examples/qparser/qparser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/grammar.cpp b/src/tools/qlalr/grammar.cpp
index f1c32adb2d..26107f51b0 100644
--- a/src/tools/qlalr/grammar.cpp
+++ b/src/tools/qlalr/grammar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/grammar_p.h b/src/tools/qlalr/grammar_p.h
index e2f294ea00..78a8da788d 100644
--- a/src/tools/qlalr/grammar_p.h
+++ b/src/tools/qlalr/grammar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/lalr.cpp b/src/tools/qlalr/lalr.cpp
index c68076477f..be1df7d40a 100644
--- a/src/tools/qlalr/lalr.cpp
+++ b/src/tools/qlalr/lalr.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/lalr.h b/src/tools/qlalr/lalr.h
index 85c5b51e38..8b413d0125 100644
--- a/src/tools/qlalr/lalr.h
+++ b/src/tools/qlalr/lalr.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/main.cpp b/src/tools/qlalr/main.cpp
index 1e4f030122..e7361f563e 100644
--- a/src/tools/qlalr/main.cpp
+++ b/src/tools/qlalr/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/parsetable.cpp b/src/tools/qlalr/parsetable.cpp
index 6877af7a00..8fdd4fd050 100644
--- a/src/tools/qlalr/parsetable.cpp
+++ b/src/tools/qlalr/parsetable.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/parsetable.h b/src/tools/qlalr/parsetable.h
index d0fe78be81..730cb4318d 100644
--- a/src/tools/qlalr/parsetable.h
+++ b/src/tools/qlalr/parsetable.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the utils of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/recognizer.cpp b/src/tools/qlalr/recognizer.cpp
index 6808f3f66b..c1c0e18c5f 100644
--- a/src/tools/qlalr/recognizer.cpp
+++ b/src/tools/qlalr/recognizer.cpp
@@ -1,41 +1,33 @@
 
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR project on Qt Labs.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/qlalr/recognizer.h b/src/tools/qlalr/recognizer.h
index 8eb089eb8d..12ac7299cf 100644
--- a/src/tools/qlalr/recognizer.h
+++ b/src/tools/qlalr/recognizer.h
@@ -1,41 +1,33 @@
 
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QLALR project on Qt Labs.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/rcc/main.cpp b/src/tools/rcc/main.cpp
index 972c59ef2e..9970745b10 100644
--- a/src/tools/rcc/main.cpp
+++ b/src/tools/rcc/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,6 +44,10 @@
 #include <qcommandlineoption.h>
 #include <qcommandlineparser.h>
 
+#ifdef Q_OS_WIN
+#  include <fcntl.h>
+#  include <io.h>
+#endif // Q_OS_WIN
 
 QT_BEGIN_NAMESPACE
 
@@ -108,13 +104,13 @@ int createProject(const QString &outFileName)
 int runRcc(int argc, char *argv[])
 {
     QCoreApplication app(argc, argv);
-    QCoreApplication::setApplicationVersion(QString::fromLatin1(QT_VERSION_STR));
+    QCoreApplication::setApplicationVersion(QStringLiteral(QT_VERSION_STR));
 
     // Note that rcc isn't translated.
     // If you use this code as an example for a translated app, make sure to translate the strings.
     QCommandLineParser parser;
     parser.setSingleDashWordOptionMode(QCommandLineParser::ParseAsLongOptions);
-    parser.setApplicationDescription(QStringLiteral("Qt Resource Compiler version %1").arg(QString::fromLatin1(QT_VERSION_STR)));
+    parser.setApplicationDescription(QLatin1String("Qt Resource Compiler version " QT_VERSION_STR));
     parser.addHelpOption();
     parser.addVersionOption();
 
@@ -123,6 +119,11 @@ int runRcc(int argc, char *argv[])
     outputOption.setValueName(QStringLiteral("file"));
     parser.addOption(outputOption);
 
+    QCommandLineOption tempOption(QStringList() << QStringLiteral("t") << QStringLiteral("temp"));
+    tempOption.setDescription(QStringLiteral("Use temporary <file> for big resources."));
+    tempOption.setValueName(QStringLiteral("file"));
+    parser.addOption(tempOption);
+
     QCommandLineOption nameOption(QStringLiteral("name"), QStringLiteral("Create an external initialization function with <name>."), QStringLiteral("name"));
     parser.addOption(nameOption);
 
@@ -141,6 +142,9 @@ int runRcc(int argc, char *argv[])
     QCommandLineOption binaryOption(QStringLiteral("binary"), QStringLiteral("Output a binary file for use as a dynamic resource."));
     parser.addOption(binaryOption);
 
+    QCommandLineOption passOption(QStringLiteral("pass"), QStringLiteral("Pass number for big resources"), QStringLiteral("number"));
+    parser.addOption(passOption);
+
     QCommandLineOption namespaceOption(QStringLiteral("namespace"), QStringLiteral("Turn off namespace macros."));
     parser.addOption(namespaceOption);
 
@@ -161,7 +165,6 @@ int runRcc(int argc, char *argv[])
 
     QString errorMsg;
     RCCResourceLibrary library;
-    QString outFilename = parser.value(outputOption);
     if (parser.isSet(nameOption))
         library.setInitName(parser.value(nameOption));
     if (parser.isSet(rootOption)) {
@@ -178,6 +181,14 @@ int runRcc(int argc, char *argv[])
         library.setCompressThreshold(parser.value(thresholdOption).toInt());
     if (parser.isSet(binaryOption))
         library.setFormat(RCCResourceLibrary::Binary);
+    if (parser.isSet(passOption)) {
+        if (parser.value(passOption) == QStringLiteral("1"))
+            library.setFormat(RCCResourceLibrary::Pass1);
+        else if (parser.value(passOption) == QStringLiteral("2"))
+            library.setFormat(RCCResourceLibrary::Pass2);
+        else
+            errorMsg = QLatin1String("Pass number must be 1 or 2");
+    }
     if (parser.isSet(namespaceOption))
         library.setUseNameSpace(!library.useNameSpace());
     if (parser.isSet(verboseOption))
@@ -194,6 +205,9 @@ int runRcc(int argc, char *argv[])
         }
     }
 
+    QString outFilename = parser.value(outputOption);
+    QString tempFilename = parser.value(tempOption);
+
     if (projectRequested) {
         return createProject(outFilename);
     }
@@ -217,19 +231,34 @@ int runRcc(int argc, char *argv[])
     if (!library.readFiles(list, errorDevice))
         return 1;
 
-    // open output
     QFile out;
-    QIODevice::OpenMode mode = QIODevice::WriteOnly;
-    if (library.format() == RCCResourceLibrary::C_Code)
-        mode |= QIODevice::Text;
+
+    // open output
+    QIODevice::OpenMode mode = QIODevice::NotOpen;
+    switch (library.format()) {
+        case RCCResourceLibrary::C_Code:
+        case RCCResourceLibrary::Pass1:
+            mode = QIODevice::WriteOnly | QIODevice::Text;
+            break;
+        case RCCResourceLibrary::Pass2:
+        case RCCResourceLibrary::Binary:
+            mode = QIODevice::WriteOnly;
+            break;
+    }
+
 
     if (outFilename.isEmpty() || outFilename == QLatin1String("-")) {
+#ifdef Q_OS_WIN
+        // Make sure fwrite to stdout doesn't do LF->CRLF
+        if (library.format() == RCCResourceLibrary::Binary)
+            _setmode(_fileno(stdout), _O_BINARY);
+#endif // Q_OS_WIN
         // using this overload close() only flushes.
         out.open(stdout, mode);
     } else {
         out.setFileName(outFilename);
         if (!out.open(mode)) {
-            const QString msg = QString::fromUtf8("Unable to open %1 for writing: %2\n").arg(outFilename).arg(out.errorString());
+            const QString msg = QString::fromLatin1("Unable to open %1 for writing: %2\n").arg(outFilename).arg(out.errorString());
             errorDevice.write(msg.toUtf8());
             return 1;
         }
@@ -245,7 +274,23 @@ int runRcc(int argc, char *argv[])
         return 0;
     }
 
-    return library.output(out, errorDevice) ? 0 : 1;
+    QFile temp;
+    if (!tempFilename.isEmpty()) {
+        temp.setFileName(tempFilename);
+        if (!temp.open(QIODevice::ReadOnly)) {
+            const QString msg = QString::fromUtf8("Unable to open temporary file %1 for reading: %2\n")
+                    .arg(outFilename).arg(out.errorString());
+            errorDevice.write(msg.toUtf8());
+            return 1;
+        }
+    }
+    bool success = library.output(out, temp, errorDevice);
+    if (!success) {
+        // erase the output file if we failed
+        out.remove();
+        return 1;
+    }
+    return 0;
 }
 
 Q_CORE_EXPORT extern QBasicAtomicInt qt_qhash_seed; // from qhash.cpp
diff --git a/src/tools/rcc/rcc.cpp b/src/tools/rcc/rcc.cpp
index cd9fe2ac86..6d4cc12d5c 100644
--- a/src/tools/rcc/rcc.cpp
+++ b/src/tools/rcc/rcc.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,12 +69,16 @@ void RCCResourceLibrary::write(const char *str, int len)
 
 void RCCResourceLibrary::writeByteArray(const QByteArray &other)
 {
-    m_out.append(other);
+    if (m_format == Pass2) {
+        m_outDevice->write(other);
+    } else {
+        m_out.append(other);
+    }
 }
 
 static inline QString msgOpenReadFailed(const QString &fname, const QString &why)
 {
-    return QString::fromUtf8("Unable to open %1 for reading: %2\n").arg(fname).arg(why);
+    return QString::fromLatin1("Unable to open %1 for reading: %2\n").arg(fname).arg(why);
 }
 
 
@@ -164,9 +160,10 @@ QString RCCFileInfo::resourceName() const
 
 void RCCFileInfo::writeDataInfo(RCCResourceLibrary &lib)
 {
-    const bool text = (lib.m_format == RCCResourceLibrary::C_Code);
+    const bool text = lib.m_format == RCCResourceLibrary::C_Code;
+    const bool pass1 = lib.m_format == RCCResourceLibrary::Pass1;
     //some info
-    if (text) {
+    if (text || pass1) {
         if (m_language != QLocale::C) {
             lib.writeString("  // ");
             lib.writeByteArray(resourceName().toLocal8Bit());
@@ -209,14 +206,17 @@ void RCCFileInfo::writeDataInfo(RCCResourceLibrary &lib)
         //data offset
         lib.writeNumber4(m_dataOffset);
     }
-    if (text)
+    if (text || pass1)
         lib.writeChar('\n');
 }
 
 qint64 RCCFileInfo::writeDataBlob(RCCResourceLibrary &lib, qint64 offset,
     QString *errorMessage)
 {
-    const bool text = (lib.m_format == RCCResourceLibrary::C_Code);
+    const bool text = lib.m_format == RCCResourceLibrary::C_Code;
+    const bool pass1 = lib.m_format == RCCResourceLibrary::Pass1;
+    const bool pass2 = lib.m_format == RCCResourceLibrary::Pass2;
+    const bool binary = lib.m_format == RCCResourceLibrary::Binary;
 
     //capture the offset
     m_dataOffset = offset;
@@ -244,7 +244,7 @@ qint64 RCCFileInfo::writeDataBlob(RCCResourceLibrary &lib, qint64 offset,
 #endif // QT_NO_COMPRESS
 
     // some info
-    if (text) {
+    if (text || pass1) {
         lib.writeString("  // ");
         lib.writeByteArray(m_fileInfo.absoluteFilePath().toLocal8Bit());
         lib.writeString("\n  ");
@@ -252,8 +252,9 @@ qint64 RCCFileInfo::writeDataBlob(RCCResourceLibrary &lib, qint64 offset,
 
     // write the length
 
-    lib.writeNumber4(data.size());
-    if (text)
+    if (text || binary || pass2)
+        lib.writeNumber4(data.size());
+    if (text || pass1)
         lib.writeString("\n  ");
     offset += 4;
 
@@ -267,27 +268,27 @@ qint64 RCCFileInfo::writeDataBlob(RCCResourceLibrary &lib, qint64 offset,
                 j = 16;
             }
         }
-    } else {
-        for (int i = data.size(); --i >= 0; )
-           lib.writeChar(*p++);
+    } else if (binary || pass2) {
+        lib.writeByteArray(data);
     }
     offset += data.size();
 
     // done
-    if (text)
+    if (text || pass1)
         lib.writeString("\n  ");
     return offset;
 }
 
 qint64 RCCFileInfo::writeDataName(RCCResourceLibrary &lib, qint64 offset)
 {
-    const bool text = (lib.m_format == RCCResourceLibrary::C_Code);
+    const bool text = lib.m_format == RCCResourceLibrary::C_Code;
+    const bool pass1 = lib.m_format == RCCResourceLibrary::Pass1;
 
     // capture the offset
     m_nameOffset = offset;
 
     // some info
-    if (text) {
+    if (text || pass1) {
         lib.writeString("  // ");
         lib.writeByteArray(m_name.toLocal8Bit());
         lib.writeString("\n  ");
@@ -295,13 +296,13 @@ qint64 RCCFileInfo::writeDataName(RCCResourceLibrary &lib, qint64 offset)
 
     // write the length
     lib.writeNumber2(m_name.length());
-    if (text)
+    if (text || pass1)
         lib.writeString("\n  ");
     offset += 2;
 
     // write the hash
     lib.writeNumber4(qt_hash(m_name));
-    if (text)
+    if (text || pass1)
         lib.writeString("\n  ");
     offset += 4;
 
@@ -309,13 +310,13 @@ qint64 RCCFileInfo::writeDataName(RCCResourceLibrary &lib, qint64 offset)
     const QChar *unicode = m_name.unicode();
     for (int i = 0; i < m_name.length(); ++i) {
         lib.writeNumber2(unicode[i].unicode());
-        if (text && i % 16 == 0)
+        if ((text || pass1) && i % 16 == 0)
             lib.writeString("\n  ");
     }
     offset += m_name.length()*2;
 
     // done
-    if (text)
+    if (text || pass1)
         lib.writeString("\n  ");
     return offset;
 }
@@ -349,7 +350,8 @@ RCCResourceLibrary::RCCResourceLibrary()
     m_namesOffset(0),
     m_dataOffset(0),
     m_useNameSpace(CONSTANT_USENAMESPACE),
-    m_errorDevice(0)
+    m_errorDevice(0),
+    m_outDevice(0)
 {
     m_out.reserve(30 * 1000 * 1000);
 }
@@ -566,7 +568,7 @@ bool RCCResourceLibrary::interpretResourceFile(QIODevice *inputDevice,
     }
 
     if (m_root == 0) {
-        const QString msg = QString::fromUtf8("RCC: Warning: No resources in '%1'.\n").arg(fname);
+        const QString msg = QString::fromLatin1("RCC: Warning: No resources in '%1'.\n").arg(fname);
         m_errorDevice->write(msg.toUtf8());
         if (!ignoreErrors && m_format == Binary) {
             // create dummy entry, otherwise loading with QResource will crash
@@ -582,7 +584,7 @@ bool RCCResourceLibrary::addFile(const QString &alias, const RCCFileInfo &file)
 {
     Q_ASSERT(m_errorDevice);
     if (file.m_fileInfo.size() > 0xffffffff) {
-        const QString msg = QString::fromUtf8("File too big: %1\n").arg(file.m_fileInfo.absoluteFilePath());
+        const QString msg = QString::fromLatin1("File too big: %1\n").arg(file.m_fileInfo.absoluteFilePath());
         m_errorDevice->write(msg.toUtf8());
         return false;
     }
@@ -634,7 +636,7 @@ bool RCCResourceLibrary::readFiles(bool ignoreErrors, QIODevice &errorDevice)
     m_errorDevice = &errorDevice;
     //read in data
     if (m_verbose) {
-        const QString msg = QString::fromUtf8("Processing %1 files [%2]\n")
+        const QString msg = QString::fromLatin1("Processing %1 files [%2]\n")
             .arg(m_fileNames.size()).arg(static_cast<int>(ignoreErrors));
         m_errorDevice->write(msg.toUtf8());
     }
@@ -659,7 +661,7 @@ bool RCCResourceLibrary::readFiles(bool ignoreErrors, QIODevice &errorDevice)
             }
         }
         if (m_verbose) {
-            const QString msg = QString::fromUtf8("Interpreting %1\n").arg(fname);
+            const QString msg = QString::fromLatin1("Interpreting %1\n").arg(fname);
             m_errorDevice->write(msg.toUtf8());
         }
 
@@ -717,9 +719,39 @@ RCCResourceLibrary::ResourceDataFileMap RCCResourceLibrary::resourceDataFileMap(
     return rc;
 }
 
-bool RCCResourceLibrary::output(QIODevice &outDevice, QIODevice &errorDevice)
+bool RCCResourceLibrary::output(QIODevice &outDevice, QIODevice &tempDevice, QIODevice &errorDevice)
 {
     m_errorDevice = &errorDevice;
+
+    const char pattern[] = { 'Q', 'R', 'C', '_', 'D', 'A', 'T', 'A' };
+    if (m_format == Pass2) {
+        char c;
+        for (int i = 0; i < 8; ) {
+            if (!tempDevice.getChar(&c)) {
+                m_errorDevice->write("No data signature found\n");
+                return false;
+            }
+            if (c == pattern[i]) {
+                ++i;
+            } else {
+                for (int k = 0; k < i; ++k)
+                    outDevice.putChar(pattern[k]);
+                outDevice.putChar(c);
+                i = 0;
+            }
+        }
+
+        m_outDevice = &outDevice;
+        quint64 start = outDevice.pos();
+        writeDataBlobs();
+        quint64 len = outDevice.pos() - start;
+
+        tempDevice.seek(tempDevice.pos() + len - 8);
+        outDevice.write(tempDevice.readAll());
+
+        return true;
+    }
+
     //write out
     if (m_verbose)
         m_errorDevice->write("Outputting code\n");
@@ -776,7 +808,12 @@ void RCCResourceLibrary::writeNumber2(quint16 number)
 
 void RCCResourceLibrary::writeNumber4(quint32 number)
 {
-    if (m_format == RCCResourceLibrary::Binary) {
+    if (m_format == RCCResourceLibrary::Pass2) {
+        m_outDevice->putChar(char(number >> 24));
+        m_outDevice->putChar(char(number >> 16));
+        m_outDevice->putChar(char(number >> 8));
+        m_outDevice->putChar(char(number));
+    } else if (m_format == RCCResourceLibrary::Binary) {
         writeChar(number >> 24);
         writeChar(number >> 16);
         writeChar(number >> 8);
@@ -791,7 +828,7 @@ void RCCResourceLibrary::writeNumber4(quint32 number)
 
 bool RCCResourceLibrary::writeHeader()
 {
-    if (m_format == C_Code) {
+    if (m_format == C_Code || m_format == Pass1) {
         writeString("/****************************************************************************\n");
         writeString("** Resource object code\n");
         writeString("**\n");
@@ -800,7 +837,6 @@ bool RCCResourceLibrary::writeHeader()
         writeString("\n**\n");
         writeString("** WARNING! All changes made in this file will be lost!\n");
         writeString( "*****************************************************************************/\n\n");
-        writeString("#include <QtCore/qglobal.h>\n\n");
     } else if (m_format == Binary) {
         writeString("qres");
         writeNumber4(0);
@@ -814,15 +850,16 @@ bool RCCResourceLibrary::writeHeader()
 bool RCCResourceLibrary::writeDataBlobs()
 {
     Q_ASSERT(m_errorDevice);
-    if (m_format == C_Code)
+    if (m_format == C_Code) {
         writeString("static const unsigned char qt_resource_data[] = {\n");
-    else if (m_format == Binary)
+    } else if (m_format == Binary) {
         m_dataOffset = m_out.size();
-    QStack<RCCFileInfo*> pending;
+    }
 
     if (!m_root)
         return false;
 
+    QStack<RCCFileInfo*> pending;
     pending.push(m_root);
     qint64 offset = 0;
     QString errorMessage;
@@ -844,12 +881,17 @@ bool RCCResourceLibrary::writeDataBlobs()
     }
     if (m_format == C_Code)
         writeString("\n};\n\n");
+    else if (m_format == Pass1) {
+        writeString("\nstatic const unsigned char qt_resource_data[");
+        writeByteArray(QByteArray::number(offset));
+        writeString("] = { 'Q', 'R', 'C', '_', 'D', 'A', 'T', 'A' };\n\n");
+    }
     return true;
 }
 
 bool RCCResourceLibrary::writeDataNames()
 {
-    if (m_format == C_Code)
+    if (m_format == C_Code || m_format == Pass1)
         writeString("static const unsigned char qt_resource_name[] = {\n");
     else if (m_format == Binary)
         m_namesOffset = m_out.size();
@@ -877,7 +919,7 @@ bool RCCResourceLibrary::writeDataNames()
             }
         }
     }
-    if (m_format == C_Code)
+    if (m_format == C_Code || m_format == Pass1)
         writeString("\n};\n\n");
     return true;
 }
@@ -889,7 +931,7 @@ static bool qt_rcc_compare_hash(const RCCFileInfo *left, const RCCFileInfo *righ
 
 bool RCCResourceLibrary::writeDataStructure()
 {
-    if (m_format == C_Code)
+    if (m_format == C_Code || m_format == Pass1)
         writeString("static const unsigned char qt_resource_struct[] = {\n");
     else if (m_format == Binary)
         m_treeOffset = m_out.size();
@@ -936,7 +978,7 @@ bool RCCResourceLibrary::writeDataStructure()
                 pending.push(child);
         }
     }
-    if (m_format == C_Code)
+    if (m_format == C_Code || m_format == Pass1)
         writeString("\n};\n\n");
 
     return true;
@@ -945,7 +987,7 @@ bool RCCResourceLibrary::writeDataStructure()
 void RCCResourceLibrary::writeMangleNamespaceFunction(const QByteArray &name)
 {
     if (m_useNameSpace) {
-        writeString("QT_MANGLE_NAMESPACE(");
+        writeString("QT_RCC_MANGLE_NAMESPACE(");
         writeByteArray(name);
         writeChar(')');
     } else {
@@ -956,7 +998,7 @@ void RCCResourceLibrary::writeMangleNamespaceFunction(const QByteArray &name)
 void RCCResourceLibrary::writeAddNamespaceFunction(const QByteArray &name)
 {
     if (m_useNameSpace) {
-        writeString("QT_PREPEND_NAMESPACE(");
+        writeString("QT_RCC_PREPEND_NAMESPACE(");
         writeByteArray(name);
         writeChar(')');
     } else {
@@ -966,31 +1008,50 @@ void RCCResourceLibrary::writeAddNamespaceFunction(const QByteArray &name)
 
 bool RCCResourceLibrary::writeInitializer()
 {
-    if (m_format == C_Code) {
+    if (m_format == C_Code || m_format == Pass1) {
         //write("\nQT_BEGIN_NAMESPACE\n");
-        QString initName = m_initName;
-        if (!initName.isEmpty()) {
-            initName.prepend(QLatin1Char('_'));
-            initName.replace(QRegExp(QLatin1String("[^a-zA-Z0-9_]")), QLatin1String("_"));
+        QString initNameStr = m_initName;
+        if (!initNameStr.isEmpty()) {
+            initNameStr.prepend(QLatin1Char('_'));
+            initNameStr.replace(QRegExp(QLatin1String("[^a-zA-Z0-9_]")), QLatin1String("_"));
         }
+        QByteArray initName = initNameStr.toLatin1();
 
         //init
-        if (m_useNameSpace)
-            writeString("QT_BEGIN_NAMESPACE\n\n");
+        if (m_useNameSpace) {
+            writeString("#ifdef QT_NAMESPACE\n"
+                        "#  define QT_RCC_PREPEND_NAMESPACE(name) ::QT_NAMESPACE::name\n"
+                        "#  define QT_RCC_MANGLE_NAMESPACE0(x) x\n"
+                        "#  define QT_RCC_MANGLE_NAMESPACE1(a, b) a##_##b\n"
+                        "#  define QT_RCC_MANGLE_NAMESPACE2(a, b) QT_RCC_MANGLE_NAMESPACE1(a,b)\n"
+                        "#  define QT_RCC_MANGLE_NAMESPACE(name) QT_RCC_MANGLE_NAMESPACE2( \\\n"
+                        "        QT_RCC_MANGLE_NAMESPACE0(name), QT_RCC_MANGLE_NAMESPACE0(QT_NAMESPACE))\n"
+                        "#else\n"
+                        "#   define QT_RCC_PREPEND_NAMESPACE(name) name\n"
+                        "#   define QT_RCC_MANGLE_NAMESPACE(name) name\n"
+                        "#endif\n\n");
+
+            writeString("#ifdef QT_NAMESPACE\n"
+                        "namespace QT_NAMESPACE {\n"
+                        "#endif\n\n");
+        }
+
         if (m_root) {
-            writeString("extern Q_CORE_EXPORT bool qRegisterResourceData\n    "
+            writeString("bool qRegisterResourceData"
                 "(int, const unsigned char *, "
                 "const unsigned char *, const unsigned char *);\n\n");
-            writeString("extern Q_CORE_EXPORT bool qUnregisterResourceData\n    "
+            writeString("bool qUnregisterResourceData"
                 "(int, const unsigned char *, "
                 "const unsigned char *, const unsigned char *);\n\n");
         }
+
         if (m_useNameSpace)
-            writeString("QT_END_NAMESPACE\n\n\n");
-        QString initResources = QLatin1String("qInitResources");
+            writeString("#ifdef QT_NAMESPACE\n}\n#endif\n\n");
+
+        QByteArray initResources = "qInitResources";
         initResources += initName;
         writeString("int ");
-        writeMangleNamespaceFunction(initResources.toLatin1());
+        writeMangleNamespaceFunction(initResources);
         writeString("()\n{\n");
 
         if (m_root) {
@@ -1001,15 +1062,12 @@ bool RCCResourceLibrary::writeInitializer()
         }
         writeString("    return 1;\n");
         writeString("}\n\n");
-        writeString("Q_CONSTRUCTOR_FUNCTION(");
-        writeMangleNamespaceFunction(initResources.toLatin1());
-        writeString(")\n\n");
 
         //cleanup
-        QString cleanResources = QLatin1String("qCleanupResources");
+        QByteArray cleanResources = "qCleanupResources";
         cleanResources += initName;
         writeString("int ");
-        writeMangleNamespaceFunction(cleanResources.toLatin1());
+        writeMangleNamespaceFunction(cleanResources);
         writeString("()\n{\n");
         if (m_root) {
             writeString("    ");
@@ -1019,9 +1077,15 @@ bool RCCResourceLibrary::writeInitializer()
         }
         writeString("    return 1;\n");
         writeString("}\n\n");
-        writeString("Q_DESTRUCTOR_FUNCTION(");
-        writeMangleNamespaceFunction(cleanResources.toLatin1());
-        writeString(")\n\n");
+
+        writeByteArray(
+                    "namespace {\n"
+                  "   struct initializer {\n"
+                  "       initializer() { QT_RCC_MANGLE_NAMESPACE(" + initResources + ")(); }\n"
+                  "       ~initializer() { QT_RCC_MANGLE_NAMESPACE(" + cleanResources + ")(); }\n"
+                  "   } dummy;\n"
+                  "}\n");
+
     } else if (m_format == Binary) {
         int i = 4;
         char *p = m_out.data();
diff --git a/src/tools/rcc/rcc.h b/src/tools/rcc/rcc.h
index 7e16fe038d..d7f1a66f41 100644
--- a/src/tools/rcc/rcc.h
+++ b/src/tools/rcc/rcc.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -64,11 +56,11 @@ public:
     RCCResourceLibrary();
     ~RCCResourceLibrary();
 
-    bool output(QIODevice &out, QIODevice &errorDevice);
+    bool output(QIODevice &outDevice, QIODevice &tempDevice, QIODevice &errorDevice);
 
     bool readFiles(bool ignoreErrors, QIODevice &errorDevice);
 
-    enum Format { Binary, C_Code };
+    enum Format { Binary, C_Code, Pass1, Pass2 };
     void setFormat(Format f) { m_format = f; }
     Format format() const { return m_format; }
 
@@ -87,6 +79,9 @@ public:
     void setInitName(const QString &name) { m_initName = name; }
     QString initName() const { return m_initName; }
 
+    void setOutputName(const QString &name) { m_outputName = name; }
+    QString outputName() const { return m_outputName; }
+
     void setCompressLevel(int c) { m_compressLevel = c; }
     int compressLevel() const { return m_compressLevel; }
 
@@ -137,6 +132,7 @@ private:
     QStringList m_fileNames;
     QString m_resourceRoot;
     QString m_initName;
+    QString m_outputName;
     Format m_format;
     bool m_verbose;
     int m_compressLevel;
@@ -147,6 +143,7 @@ private:
     bool m_useNameSpace;
     QStringList m_failedResources;
     QIODevice *m_errorDevice;
+    QIODevice *m_outDevice;
     QByteArray m_out;
 };
 
diff --git a/src/tools/uic/cpp/cppextractimages.cpp b/src/tools/uic/cpp/cppextractimages.cpp
index 97c06d3aec..5f31d2796e 100644
--- a/src/tools/uic/cpp/cppextractimages.cpp
+++ b/src/tools/uic/cpp/cppextractimages.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppextractimages.h b/src/tools/uic/cpp/cppextractimages.h
index 58273c1911..ce5fd75b5d 100644
--- a/src/tools/uic/cpp/cppextractimages.h
+++ b/src/tools/uic/cpp/cppextractimages.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwritedeclaration.cpp b/src/tools/uic/cpp/cppwritedeclaration.cpp
index 9051cdf230..782d3477ca 100644
--- a/src/tools/uic/cpp/cppwritedeclaration.cpp
+++ b/src/tools/uic/cpp/cppwritedeclaration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwritedeclaration.h b/src/tools/uic/cpp/cppwritedeclaration.h
index ce4a3d14ee..7cd8b3581e 100644
--- a/src/tools/uic/cpp/cppwritedeclaration.h
+++ b/src/tools/uic/cpp/cppwritedeclaration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteicondata.cpp b/src/tools/uic/cpp/cppwriteicondata.cpp
index c13ce9e9f7..a3fa6381e2 100644
--- a/src/tools/uic/cpp/cppwriteicondata.cpp
+++ b/src/tools/uic/cpp/cppwriteicondata.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteicondata.h b/src/tools/uic/cpp/cppwriteicondata.h
index 090dddc242..0dc2bf0721 100644
--- a/src/tools/uic/cpp/cppwriteicondata.h
+++ b/src/tools/uic/cpp/cppwriteicondata.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteicondeclaration.cpp b/src/tools/uic/cpp/cppwriteicondeclaration.cpp
index a8fda1f2d2..7533110c85 100644
--- a/src/tools/uic/cpp/cppwriteicondeclaration.cpp
+++ b/src/tools/uic/cpp/cppwriteicondeclaration.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteicondeclaration.h b/src/tools/uic/cpp/cppwriteicondeclaration.h
index 35355369b4..c093430bec 100644
--- a/src/tools/uic/cpp/cppwriteicondeclaration.h
+++ b/src/tools/uic/cpp/cppwriteicondeclaration.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteiconinitialization.cpp b/src/tools/uic/cpp/cppwriteiconinitialization.cpp
index ac1971d8a5..5be541e63f 100644
--- a/src/tools/uic/cpp/cppwriteiconinitialization.cpp
+++ b/src/tools/uic/cpp/cppwriteiconinitialization.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteiconinitialization.h b/src/tools/uic/cpp/cppwriteiconinitialization.h
index 781e77ec13..d8a0a6195f 100644
--- a/src/tools/uic/cpp/cppwriteiconinitialization.h
+++ b/src/tools/uic/cpp/cppwriteiconinitialization.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteincludes.cpp b/src/tools/uic/cpp/cppwriteincludes.cpp
index 5b7403bf06..ce6b2bedc1 100644
--- a/src/tools/uic/cpp/cppwriteincludes.cpp
+++ b/src/tools/uic/cpp/cppwriteincludes.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteincludes.h b/src/tools/uic/cpp/cppwriteincludes.h
index 8e17494863..6f6a0f6105 100644
--- a/src/tools/uic/cpp/cppwriteincludes.h
+++ b/src/tools/uic/cpp/cppwriteincludes.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteinitialization.cpp b/src/tools/uic/cpp/cppwriteinitialization.cpp
index 9b1903b136..5a1c1850d4 100644
--- a/src/tools/uic/cpp/cppwriteinitialization.cpp
+++ b/src/tools/uic/cpp/cppwriteinitialization.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/cpp/cppwriteinitialization.h b/src/tools/uic/cpp/cppwriteinitialization.h
index cbb22118c7..1cf3e750b4 100644
--- a/src/tools/uic/cpp/cppwriteinitialization.h
+++ b/src/tools/uic/cpp/cppwriteinitialization.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/customwidgetsinfo.cpp b/src/tools/uic/customwidgetsinfo.cpp
index 0ca48f4cbb..bd70f50f77 100644
--- a/src/tools/uic/customwidgetsinfo.cpp
+++ b/src/tools/uic/customwidgetsinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/customwidgetsinfo.h b/src/tools/uic/customwidgetsinfo.h
index d4ac02aba9..5e58d6c3ce 100644
--- a/src/tools/uic/customwidgetsinfo.h
+++ b/src/tools/uic/customwidgetsinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/databaseinfo.cpp b/src/tools/uic/databaseinfo.cpp
index a052cdf55a..7a4c6f6ede 100644
--- a/src/tools/uic/databaseinfo.cpp
+++ b/src/tools/uic/databaseinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/databaseinfo.h b/src/tools/uic/databaseinfo.h
index db60a1b0ff..0c80ad9551 100644
--- a/src/tools/uic/databaseinfo.h
+++ b/src/tools/uic/databaseinfo.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/driver.cpp b/src/tools/uic/driver.cpp
index 5c99ffb208..82bcab0fab 100644
--- a/src/tools/uic/driver.cpp
+++ b/src/tools/uic/driver.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/driver.h b/src/tools/uic/driver.h
index 12bb353e82..6e1384d5b6 100644
--- a/src/tools/uic/driver.h
+++ b/src/tools/uic/driver.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/globaldefs.h b/src/tools/uic/globaldefs.h
index 9ec5d143c6..df803ad17e 100644
--- a/src/tools/uic/globaldefs.h
+++ b/src/tools/uic/globaldefs.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/main.cpp b/src/tools/uic/main.cpp
index 12b0ee6737..cc645c73f2 100644
--- a/src/tools/uic/main.cpp
+++ b/src/tools/uic/main.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/option.h b/src/tools/uic/option.h
index 52dc731057..92d54916b2 100644
--- a/src/tools/uic/option.h
+++ b/src/tools/uic/option.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/qclass_lib_map.h b/src/tools/uic/qclass_lib_map.h
index 48793e7f09..940017d063 100644
--- a/src/tools/uic/qclass_lib_map.h
+++ b/src/tools/uic/qclass_lib_map.h
@@ -322,6 +322,7 @@ QT_CLASS_LIB(QMacCompatGLenum, QtOpenGL, qgl.h)
 QT_CLASS_LIB(QGLFormat, QtOpenGL, qgl.h)
 QT_CLASS_LIB(QGLContext, QtOpenGL, qgl.h)
 QT_CLASS_LIB(QGLWidget, QtOpenGL, qgl.h)
+QT_CLASS_LIB(QOpenGLWidget,QtWidgets,qopenglwidget.h)
 QT_CLASS_LIB(QGLBuffer, QtOpenGL, qglbuffer.h)
 QT_CLASS_LIB(QGLColormap, QtOpenGL, qglcolormap.h)
 QT_CLASS_LIB(QGLFramebufferObject, QtOpenGL, qglframebufferobject.h)
diff --git a/src/tools/uic/treewalker.cpp b/src/tools/uic/treewalker.cpp
index b914d6ddd6..725fc27e6b 100644
--- a/src/tools/uic/treewalker.cpp
+++ b/src/tools/uic/treewalker.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/treewalker.h b/src/tools/uic/treewalker.h
index 49d0b6b6f8..6ecd490e75 100644
--- a/src/tools/uic/treewalker.h
+++ b/src/tools/uic/treewalker.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/ui4.cpp b/src/tools/uic/ui4.cpp
index 164d2afdad..352cd34b68 100644
--- a/src/tools/uic/ui4.cpp
+++ b/src/tools/uic/ui4.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/ui4.h b/src/tools/uic/ui4.h
index d7ed76b4be..d50a70c468 100644
--- a/src/tools/uic/ui4.h
+++ b/src/tools/uic/ui4.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/uic.cpp b/src/tools/uic/uic.cpp
index 265f578524..2bee9de1e8 100644
--- a/src/tools/uic/uic.cpp
+++ b/src/tools/uic/uic.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -147,7 +139,7 @@ static double versionFromUiAttribute(QXmlStreamReader &reader)
     const QString versionAttribute = QLatin1String("version");
     if (!attributes.hasAttribute(versionAttribute))
         return 4.0;
-    const QString version = attributes.value(versionAttribute).toString();
+    const QStringRef version = attributes.value(versionAttribute);
     return version.toDouble();
 }
 
diff --git a/src/tools/uic/uic.h b/src/tools/uic/uic.h
index d5d5b1fea2..410fad5b90 100644
--- a/src/tools/uic/uic.h
+++ b/src/tools/uic/uic.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/utils.h b/src/tools/uic/utils.h
index ad2d5eed42..c050747bc9 100644
--- a/src/tools/uic/utils.h
+++ b/src/tools/uic/utils.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/validator.cpp b/src/tools/uic/validator.cpp
index ade95ad51a..2b77501d9b 100644
--- a/src/tools/uic/validator.cpp
+++ b/src/tools/uic/validator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/tools/uic/validator.h b/src/tools/uic/validator.h
index b7a6564987..82f6b71b1a 100644
--- a/src/tools/uic/validator.h
+++ b/src/tools/uic/validator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the tools applications of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/accessible/accessible.pri b/src/widgets/accessible/accessible.pri
index 9fb2f18950..bcdfbd639c 100644
--- a/src/widgets/accessible/accessible.pri
+++ b/src/widgets/accessible/accessible.pri
@@ -1,6 +1,23 @@
 # Qt accessibility module
 
 contains(QT_CONFIG, accessibility) {
-    HEADERS += accessible/qaccessiblewidget.h
-    SOURCES += accessible/qaccessiblewidget.cpp
+    HEADERS += \
+        accessible/qaccessiblewidget.h \
+        accessible/qaccessiblewidgetfactory_p.h \
+        accessible/complexwidgets.h \
+        accessible/itemviews.h \
+        accessible/qaccessiblemenu.h \
+        accessible/qaccessiblewidgets.h \
+        accessible/rangecontrols.h \
+        accessible/simplewidgets.h
+
+    SOURCES += \
+        accessible/qaccessiblewidget.cpp \
+        accessible/qaccessiblewidgetfactory.cpp \
+        accessible/complexwidgets.cpp \
+        accessible/itemviews.cpp \
+        accessible/qaccessiblemenu.cpp \
+        accessible/qaccessiblewidgets.cpp \
+        accessible/rangecontrols.cpp \
+        accessible/simplewidgets.cpp
 }
diff --git a/src/plugins/accessible/widgets/complexwidgets.cpp b/src/widgets/accessible/complexwidgets.cpp
index 5f3b6b4bd6..30f9ccb1f4 100644
--- a/src/plugins/accessible/widgets/complexwidgets.cpp
+++ b/src/widgets/accessible/complexwidgets.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,7 +58,8 @@
 
 QT_BEGIN_NAMESPACE
 
-QString Q_GUI_EXPORT qt_accStripAmp(const QString &text);
+QString qt_accStripAmp(const QString &text);
+QString qt_accHotKey(const QString &text);
 
 #ifndef QT_NO_TABBAR
 /*!
@@ -94,9 +87,12 @@ public:
     QObject *object() const { return 0; }
     QAccessible::Role role() const { return QAccessible::PageTab; }
     QAccessible::State state() const {
-        QAccessibleInterface *parentInterface = parent();
-        QAccessible::State state = parentInterface->state();
-        return state;
+        if (!isValid()) {
+            QAccessible::State s;
+            s.invalid = true;
+            return s;
+        }
+        return parent()->state();
     }
     QRect rect() const {
         if (!isValid())
@@ -108,19 +104,38 @@ public:
         return rec;
     }
 
-    bool isValid() const { return true; }// (!m_parent.isNull()) && m_parent->count() > m_index; }
+    bool isValid() const { return m_parent.data() && m_parent->count() > m_index; }
 
     QAccessibleInterface *childAt(int, int) const { return 0; }
     int childCount() const { return 0; }
     int indexOfChild(const QAccessibleInterface *) const  { return -1; }
 
-    QString text(QAccessible::Text) const { return qt_accStripAmp(m_parent->tabText(m_index)); }
+    QString text(QAccessible::Text t) const
+    {
+        if (!isValid())
+            return QString();
+        switch (t) {
+        case QAccessible::Name:
+            return qt_accStripAmp(m_parent->tabText(m_index));
+        case QAccessible::Accelerator:
+            return qt_accHotKey(m_parent->tabText(m_index));
+        case QAccessible::Description:
+            return m_parent->tabToolTip(m_index);
+        case QAccessible::Help:
+            return m_parent->tabWhatsThis(m_index);
+        default:
+            break;
+        }
+        return QString();
+    }
+
     void setText(QAccessible::Text, const QString &) {}
 
     QAccessibleInterface *parent() const {
-        return QAccessible::queryAccessibleInterface(m_parent);
+        return QAccessible::queryAccessibleInterface(m_parent.data());
     }
     QAccessibleInterface *child(int) const { return 0; }
+
     // action interface
     QStringList actionNames() const
     {
@@ -129,7 +144,7 @@ public:
 
     void doAction(const QString &actionName)
     {
-        if (actionName == pressAction())
+        if (isValid() && actionName == pressAction())
             m_parent->setCurrentIndex(m_index);
     }
 
@@ -217,6 +232,8 @@ QString QAccessibleTabBar::text(QAccessible::Text t) const
 {
     if (t == QAccessible::Name) {
         return qt_accStripAmp(tabBar()->tabText(tabBar()->currentIndex()));
+    } else if (t == QAccessible::Accelerator) {
+        return qt_accHotKey(tabBar()->tabText(tabBar()->currentIndex()));
     }
     return QString();
 }
diff --git a/src/plugins/accessible/widgets/complexwidgets.h b/src/widgets/accessible/complexwidgets.h
index 00186282f3..f6b1cb4ff5 100644
--- a/src/plugins/accessible/widgets/complexwidgets.h
+++ b/src/widgets/accessible/complexwidgets.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/accessible/widgets/itemviews.cpp b/src/widgets/accessible/itemviews.cpp
index 7d3668ee5a..126c86165f 100644
--- a/src/plugins/accessible/widgets/itemviews.cpp
+++ b/src/widgets/accessible/itemviews.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,8 +43,6 @@
 
 QT_BEGIN_NAMESPACE
 
-QString Q_GUI_EXPORT qt_accStripAmp(const QString &text);
-
 #ifndef QT_NO_ITEMVIEWS
 /*
 Implementation of the IAccessible2 table2 interface. Much simpler than
diff --git a/src/plugins/accessible/widgets/itemviews.h b/src/widgets/accessible/itemviews.h
index 45a07c5972..87743e93a9 100644
--- a/src/plugins/accessible/widgets/itemviews.h
+++ b/src/widgets/accessible/itemviews.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/accessible/widgets/qaccessiblemenu.cpp b/src/widgets/accessible/qaccessiblemenu.cpp
index 39ac335131..2a8b364b1c 100644
--- a/src/plugins/accessible/widgets/qaccessiblemenu.cpp
+++ b/src/widgets/accessible/qaccessiblemenu.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -52,8 +44,8 @@ QT_BEGIN_NAMESPACE
 
 #ifndef QT_NO_MENU
 
-QString Q_GUI_EXPORT qt_accStripAmp(const QString &text);
-QString Q_GUI_EXPORT qt_accHotKey(const QString &text);
+QString qt_accStripAmp(const QString &text);
+QString qt_accHotKey(const QString &text);
 
 QAccessibleInterface *getOrCreateMenu(QWidget *menu, QAction *action)
 {
@@ -294,8 +286,7 @@ QString QAccessibleMenuItem::text(QAccessible::Text t) const
     QString str;
     switch (t) {
     case QAccessible::Name:
-        str = m_action->text();
-        str = qt_accStripAmp(str);
+        str = qt_accStripAmp(m_action->text());
         break;
     case QAccessible::Accelerator: {
 #ifndef QT_NO_SHORTCUT
diff --git a/src/plugins/accessible/widgets/qaccessiblemenu.h b/src/widgets/accessible/qaccessiblemenu.h
index e8c9f8af3a..5b5828540a 100644
--- a/src/plugins/accessible/widgets/qaccessiblemenu.h
+++ b/src/widgets/accessible/qaccessiblemenu.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/accessible/qaccessiblewidget.cpp b/src/widgets/accessible/qaccessiblewidget.cpp
index 4e5fade3f4..f835a36a92 100644
--- a/src/widgets/accessible/qaccessiblewidget.cpp
+++ b/src/widgets/accessible/qaccessiblewidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,7 +62,8 @@ static QList<QWidget*> childWidgets(const QWidget *widget)
 #if !defined(QT_NO_MENU)
             && !qobject_cast<QMenu*>(w)
 #endif
-            && w->objectName() != QLatin1String("qt_rubberband"))
+            && w->objectName() != QLatin1String("qt_rubberband")
+            && w->objectName() != QLatin1String("qt_spinbox_lineedit"))
             widgets.append(w);
     }
     return widgets;
@@ -111,7 +104,6 @@ static int qt_accAmpIndex(const QString &text)
         return -1;
 
     int fa = 0;
-    QChar ac;
     while ((fa = text.indexOf(QLatin1Char('&'), fa)) != -1) {
         ++fa;
         if (fa < text.length()) {
@@ -134,7 +126,7 @@ static int qt_accAmpIndex(const QString &text)
 #endif
 }
 
-QString Q_WIDGETS_EXPORT qt_accStripAmp(const QString &text)
+QString qt_accStripAmp(const QString &text)
 {
     QString newText(text);
     int ampIndex = qt_accAmpIndex(newText);
@@ -144,7 +136,7 @@ QString Q_WIDGETS_EXPORT qt_accStripAmp(const QString &text)
     return newText.replace(QLatin1String("&&"), QLatin1String("&"));
 }
 
-QString Q_WIDGETS_EXPORT qt_accHotKey(const QString &text)
+QString qt_accHotKey(const QString &text)
 {
     int ampIndex = qt_accAmpIndex(text);
     if (ampIndex != -1)
@@ -240,10 +232,10 @@ QWidget *QAccessibleWidget::widget() const
 */
 QObject *QAccessibleWidget::parentObject() const
 {
-    QObject *parent = object()->parent();
-    if (!parent)
-        parent = qApp;
-    return parent;
+    QWidget *w = widget();
+    if (!w || w->isWindow() || !w->parentWidget())
+        return qApp;
+    return w->parent();
 }
 
 /*! \reimp */
@@ -353,11 +345,7 @@ QAccessibleWidget::relations(QAccessible::Relation match /*= QAccessible::AllRel
 /*! \reimp */
 QAccessibleInterface *QAccessibleWidget::parent() const
 {
-    Q_ASSERT(widget());
-    QObject *parentWidget= widget()->parentWidget();
-    if (!parentWidget)
-        parentWidget = qApp;
-    return QAccessible::queryAccessibleInterface(parentWidget);
+    return QAccessible::queryAccessibleInterface(parentObject());
 }
 
 /*! \reimp */
diff --git a/src/widgets/accessible/qaccessiblewidget.h b/src/widgets/accessible/qaccessiblewidget.h
index 819bb5b8c4..6b07d49e5f 100644
--- a/src/widgets/accessible/qaccessiblewidget.h
+++ b/src/widgets/accessible/qaccessiblewidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/accessible/widgets/main.cpp b/src/widgets/accessible/qaccessiblewidgetfactory.cpp
index 717c15edd1..7ae4a195f5 100644
--- a/src/plugins/accessible/widgets/main.cpp
+++ b/src/widgets/accessible/qaccessiblewidgetfactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,8 +38,6 @@
 #include "complexwidgets.h"
 #include "itemviews.h"
 
-#include <qaccessibleplugin.h>
-#include <qplugin.h>
 #include <qpushbutton.h>
 #include <qtoolbutton.h>
 #include <qtreeview.h>
@@ -58,23 +48,7 @@
 
 QT_BEGIN_NAMESPACE
 
-
-class AccessibleFactory : public QAccessiblePlugin
-{
-    Q_OBJECT
-    Q_PLUGIN_METADATA(IID "org.qt-project.Qt.QAccessibleFactoryInterface" FILE "widgets.json")
-
-public:
-    AccessibleFactory();
-
-    QAccessibleInterface *create(const QString &classname, QObject *object);
-};
-
-AccessibleFactory::AccessibleFactory()
-{
-}
-
-QAccessibleInterface *AccessibleFactory::create(const QString &classname, QObject *object)
+QAccessibleInterface *qAccessibleFactory(const QString &classname, QObject *object)
 {
     QAccessibleInterface *iface = 0;
     if (!object || !object->isWidgetType())
@@ -84,7 +58,10 @@ QAccessibleInterface *AccessibleFactory::create(const QString &classname, QObjec
     if (false) {
 #ifndef QT_NO_LINEEDIT
     } else if (classname == QLatin1String("QLineEdit")) {
-        iface = new QAccessibleLineEdit(widget);
+        if (widget->objectName() == QLatin1String("qt_spinbox_lineedit"))
+            iface = 0;
+        else
+            iface = new QAccessibleLineEdit(widget);
 #endif
 #ifndef QT_NO_COMBOBOX
     } else if (classname == QLatin1String("QComboBox")) {
@@ -110,37 +87,13 @@ QAccessibleInterface *AccessibleFactory::create(const QString &classname, QObjec
 #endif
 #ifndef QT_NO_TOOLBUTTON
     } else if (classname == QLatin1String("QToolButton")) {
-        QAccessible::Role role = QAccessible::NoRole;
-#ifndef QT_NO_MENU
-        QToolButton *tb = qobject_cast<QToolButton*>(widget);
-        if (!tb->menu())
-            role = tb->isCheckable() ? QAccessible::CheckBox : QAccessible::PushButton;
-        else if (tb->popupMode() == QToolButton::DelayedPopup)
-            role = QAccessible::ButtonDropDown;
-        else
-#endif
-            role = QAccessible::ButtonMenu;
-        iface = new QAccessibleToolButton(widget, role);
+        iface = new QAccessibleToolButton(widget);
 #endif // QT_NO_TOOLBUTTON
-    } else if (classname == QLatin1String("QCheckBox")) {
-        iface = new QAccessibleButton(widget, QAccessible::CheckBox);
-    } else if (classname == QLatin1String("QRadioButton")) {
-        iface = new QAccessibleButton(widget, QAccessible::RadioButton);
-    } else if (classname == QLatin1String("QPushButton")) {
-        QAccessible::Role role = QAccessible::NoRole;
-        QPushButton *pb = qobject_cast<QPushButton*>(widget);
-#ifndef QT_NO_MENU
-        if (pb->menu())
-            role = QAccessible::ButtonMenu;
-        else
-#endif
-        if (pb->isCheckable())
-            role = QAccessible::CheckBox;
-        else
-            role = QAccessible::PushButton;
-        iface = new QAccessibleButton(widget, role);
-    } else if (classname == QLatin1String("QAbstractButton")) {
-        iface = new QAccessibleButton(widget, QAccessible::PushButton);
+    } else if (classname == QLatin1String("QCheckBox")
+            || classname == QLatin1String("QRadioButton")
+            || classname == QLatin1String("QPushButton")
+            || classname == QLatin1String("QAbstractButton")) {
+        iface = new QAccessibleButton(widget);
     } else if (classname == QLatin1String("QDialog")) {
         iface = new QAccessibleWidget(widget, QAccessible::Dialog);
     } else if (classname == QLatin1String("QMessageBox")) {
@@ -254,9 +207,6 @@ QAccessibleInterface *AccessibleFactory::create(const QString &classname, QObjec
     return iface;
 }
 
-
 QT_END_NAMESPACE
 
-#include "main.moc"
-
 #endif // QT_NO_ACCESSIBILITY
diff --git a/src/widgets/accessible/qaccessiblewidgetfactory_p.h b/src/widgets/accessible/qaccessiblewidgetfactory_p.h
new file mode 100644
index 0000000000..b36e0cfcb6
--- /dev/null
+++ b/src/widgets/accessible/qaccessiblewidgetfactory_p.h
@@ -0,0 +1,45 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtWidgets module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QtGui/qaccessible.h>
+
+#ifndef QACCESSIBLEWIDGETFACTORY_H
+#define QACCESSIBLEWIDGETFACTORY_H
+
+QT_BEGIN_NAMESPACE
+
+QAccessibleInterface *qAccessibleFactory(const QString &classname, QObject *object);
+
+QT_END_NAMESPACE
+
+#endif
diff --git a/src/plugins/accessible/widgets/qaccessiblewidgets.cpp b/src/widgets/accessible/qaccessiblewidgets.cpp
index b502682938..f459affd07 100644
--- a/src/plugins/accessible/widgets/qaccessiblewidgets.cpp
+++ b/src/widgets/accessible/qaccessiblewidgets.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -72,10 +64,10 @@
 
 QT_BEGIN_NAMESPACE
 
-QString Q_GUI_EXPORT qt_accStripAmp(const QString &text);
-QString Q_GUI_EXPORT qt_accHotKey(const QString &text);
+QString qt_accStripAmp(const QString &text);
+QString qt_accHotKey(const QString &text);
 
-QList<QWidget*> childWidgets(const QWidget *widget, bool includeTopLevel)
+QList<QWidget*> childWidgets(const QWidget *widget)
 {
     if (widget == 0)
         return QList<QWidget*>();
@@ -86,7 +78,7 @@ QList<QWidget*> childWidgets(const QWidget *widget, bool includeTopLevel)
         if (!w)
             continue;
         QString objectName = w->objectName();
-        if ((includeTopLevel || !w->isWindow())
+        if (!w->isWindow()
               && !qobject_cast<QFocusFrame*>(w)
               && !qobject_cast<QMenu*>(w)
               && objectName != QLatin1String("qt_rubberband")
@@ -637,6 +629,8 @@ QString QAccessibleDockWidget::text(QAccessible::Text t) const
 {
     if (t == QAccessible::Name) {
         return qt_accStripAmp(dockWidget()->windowTitle());
+    } else if (t == QAccessible::Accelerator) {
+        return qt_accHotKey(dockWidget()->windowTitle());
     }
     return QString();
 }
@@ -653,6 +647,7 @@ QAccessibleTextWidget::QAccessibleTextWidget(QWidget *o, QAccessible::Role r, co
 QAccessible::State QAccessibleTextWidget::state() const
 {
     QAccessible::State s = QAccessibleWidget::state();
+    s.selectableText = true;
     s.multiLine = true;
     return s;
 }
@@ -706,105 +701,102 @@ QString QAccessibleTextWidget::attributes(int offset, int *startOffset, int *end
      http://linuxfoundation.org/collaborate/workgroups/accessibility/iaccessible2/textattributes
     */
 
-    if (offset >= characterCount()) {
+    // IAccessible2 defines -1 as length and -2 as cursor position
+    if (offset == -2)
+        offset = cursorPosition();
+
+    const int charCount = characterCount();
+
+    // -1 doesn't make much sense here, but it's better to return something
+    // screen readers may ask for text attributes at the cursor pos which may be equal to length
+    if (offset == -1 || offset == charCount)
+        offset = charCount - 1;
+
+    if (offset < 0 || offset > charCount) {
         *startOffset = -1;
         *endOffset = -1;
         return QString();
     }
 
-    QMap<QString, QString> attrs;
 
     QTextCursor cursor = textCursor();
+    cursor.setPosition(offset);
+    QTextBlock block = cursor.block();
 
-    //cursor.charFormat returns the format of the previous character
-    cursor.setPosition(offset + 1);
-    QTextCharFormat charFormat = cursor.charFormat();
+    int blockStart = block.position();
+    int blockEnd = blockStart + block.length();
 
-    cursor.setPosition(offset);
-    QTextBlockFormat blockFormat = cursor.blockFormat();
+    QTextBlock::iterator iter = block.begin();
+    while (!iter.fragment().contains(offset))
+        ++iter;
 
-    QTextCharFormat charFormatComp;
-    QTextBlockFormat blockFormatComp;
-
-    *startOffset = offset;
-    cursor.setPosition(*startOffset);
-    while (*startOffset > 0) {
-        charFormatComp = cursor.charFormat();
-        cursor.setPosition(*startOffset - 1);
-        blockFormatComp = cursor.blockFormat();
-        if ((charFormat == charFormatComp) && (blockFormat == blockFormatComp))
-            (*startOffset)--;
-        else
-            break;
-    }
+    QTextFragment fragment = iter.fragment();
+    int pos = fragment.position();
 
-    int limit = characterCount() + 1;
-    *endOffset = offset + 1;
-    cursor.setPosition(*endOffset);
-    while (*endOffset < limit) {
-        blockFormatComp = cursor.blockFormat();
-        cursor.setPosition(*endOffset + 1);
-        charFormatComp = cursor.charFormat();
-        if ((charFormat == charFormatComp) && (cursor.blockFormat() == blockFormatComp))
-            (*endOffset)++;
-        else
-            break;
-    }
+    // text block and fragment may overlap, use the smallest common range
+    *startOffset = qMax(pos, blockStart);
+    Q_ASSERT(*startOffset <= offset);
+    *endOffset = qMin(pos + fragment.length(), blockEnd);
+    Q_ASSERT(*endOffset >= offset);
+
+    QTextCharFormat charFormat = fragment.charFormat();
+    QTextBlockFormat blockFormat = cursor.blockFormat();
 
+    QMap<QByteArray, QString> attrs;
     QString family = charFormat.fontFamily();
     if (!family.isEmpty()) {
-        family = family.replace('\\',"\\\\");
-        family = family.replace(':',"\\:");
-        family = family.replace(',',"\\,");
-        family = family.replace('=',"\\=");
-        family = family.replace(';',"\\;");
-        family = family.replace('\"',"\\\"");
-        attrs["font-family"] = '"'+family+'"';
+        family = family.replace('\\',QStringLiteral("\\\\"));
+        family = family.replace(':',QStringLiteral("\\:"));
+        family = family.replace(',',QStringLiteral("\\,"));
+        family = family.replace('=',QStringLiteral("\\="));
+        family = family.replace(';',QStringLiteral("\\;"));
+        family = family.replace('\"',QStringLiteral("\\\""));
+        attrs["font-family"] = QString::fromLatin1("\"%1\"").arg(family);
     }
 
     int fontSize = int(charFormat.fontPointSize());
     if (fontSize)
-        attrs["font-size"] = QString::number(fontSize).append("pt");
+        attrs["font-size"] = QString::fromLatin1("%1pt").arg(fontSize);
 
     //Different weight values are not handled
-    attrs["font-weight"] = (charFormat.fontWeight() > QFont::Normal) ? "bold" : "normal";
+    attrs["font-weight"] = QString::fromLatin1(charFormat.fontWeight() > QFont::Normal ? "bold" : "normal");
 
     QFont::Style style = charFormat.font().style();
-    attrs["font-style"] = (style == QFont::StyleItalic) ? "italic" : ((style == QFont::StyleOblique) ? "oblique": "normal");
+    attrs["font-style"] = QString::fromLatin1((style == QFont::StyleItalic) ? "italic" : ((style == QFont::StyleOblique) ? "oblique": "normal"));
 
-    attrs["text-underline-style"] = charFormat.font().underline() ? "solid" : "none";
+    attrs["text-underline-style"] = QString::fromLatin1(charFormat.font().underline() ? "solid" : "none");
 
     QTextCharFormat::VerticalAlignment alignment = charFormat.verticalAlignment();
-    attrs["text-position"] = (alignment == QTextCharFormat::AlignSubScript) ? "sub" : ((alignment == QTextCharFormat::AlignSuperScript) ? "super" : "baseline" );
+    attrs["text-position"] = QString::fromLatin1((alignment == QTextCharFormat::AlignSubScript) ? "sub" : ((alignment == QTextCharFormat::AlignSuperScript) ? "super" : "baseline" ));
 
     QBrush background = charFormat.background();
     if (background.style() == Qt::SolidPattern) {
-        attrs["background-color"] = QString("rgb(%1,%2,%3)").arg(background.color().red()).arg(background.color().green()).arg(background.color().blue());
+        attrs["background-color"] = QString::fromLatin1("rgb(%1,%2,%3)").arg(background.color().red()).arg(background.color().green()).arg(background.color().blue());
     }
 
     QBrush foreground = charFormat.foreground();
     if (foreground.style() == Qt::SolidPattern) {
-        attrs["color"] = QString("rgb(%1,%2,%3)").arg(foreground.color().red()).arg(foreground.color().green()).arg(foreground.color().blue());
+        attrs["color"] = QString::fromLatin1("rgb(%1,%2,%3)").arg(foreground.color().red()).arg(foreground.color().green()).arg(foreground.color().blue());
     }
 
     switch (blockFormat.alignment() & (Qt::AlignLeft | Qt::AlignRight | Qt::AlignHCenter | Qt::AlignJustify)) {
     case Qt::AlignLeft:
-        attrs["text-align"] = "left";
+        attrs["text-align"] = QStringLiteral("left");
         break;
     case Qt::AlignRight:
-        attrs["text-align"] = "right";
+        attrs["text-align"] = QStringLiteral("right");
         break;
     case Qt::AlignHCenter:
-        attrs["text-align"] = "center";
+        attrs["text-align"] = QStringLiteral("center");
         break;
     case Qt::AlignJustify:
-        attrs["text-align"] = "left";
+        attrs["text-align"] = QStringLiteral("left");
         break;
     }
 
     QString result;
-    foreach (const QString &attributeName, attrs.keys()) {
-        result.append(attributeName).append(':').append(attrs[attributeName]).append(';');
+    foreach (const QByteArray &attributeName, attrs.keys()) {
+        result.append(QString::fromLatin1(attributeName)).append(':').append(attrs[attributeName]).append(';');
     }
 
     return result;
@@ -973,7 +965,7 @@ QAccessibleMainWindow::QAccessibleMainWindow(QWidget *widget)
 
 QAccessibleInterface *QAccessibleMainWindow::child(int index) const
 {
-    QList<QWidget*> kids = childWidgets(mainWindow(), true);
+    QList<QWidget*> kids = childWidgets(mainWindow());
     if (index >= 0 && index < kids.count()) {
         return QAccessible::queryAccessibleInterface(kids.at(index));
     }
@@ -982,13 +974,13 @@ QAccessibleInterface *QAccessibleMainWindow::child(int index) const
 
 int QAccessibleMainWindow::childCount() const
 {
-    QList<QWidget*> kids = childWidgets(mainWindow(), true);
+    QList<QWidget*> kids = childWidgets(mainWindow());
     return kids.count();
 }
 
 int QAccessibleMainWindow::indexOfChild(const QAccessibleInterface *iface) const
 {
-    QList<QWidget*> kids = childWidgets(mainWindow(), true);
+    QList<QWidget*> kids = childWidgets(mainWindow());
     return kids.indexOf(static_cast<QWidget*>(iface->object()));
 }
 
@@ -1001,7 +993,7 @@ QAccessibleInterface *QAccessibleMainWindow::childAt(int x, int y) const
     if (!QRect(gp.x(), gp.y(), w->width(), w->height()).contains(x, y))
         return 0;
 
-    QWidgetList kids = childWidgets(mainWindow(), true);
+    QWidgetList kids = childWidgets(mainWindow());
     QPoint rp = mainWindow()->mapFromGlobal(QPoint(x, y));
     for (int i = 0; i < kids.size(); ++i) {
         QWidget *child = kids.at(i);
diff --git a/src/plugins/accessible/widgets/qaccessiblewidgets.h b/src/widgets/accessible/qaccessiblewidgets.h
index 3f50010685..b2459fe71e 100644
--- a/src/plugins/accessible/widgets/qaccessiblewidgets.h
+++ b/src/widgets/accessible/qaccessiblewidgets.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/plugins/accessible/widgets/rangecontrols.cpp b/src/widgets/accessible/rangecontrols.cpp
index f2aa5522e8..d8f118e4a1 100644
--- a/src/plugins/accessible/widgets/rangecontrols.cpp
+++ b/src/widgets/accessible/rangecontrols.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,27 +43,28 @@
 #include <qglobal.h>
 #include <QDoubleSpinBox>
 #include <QDial>
+#include <QtWidgets/qlineedit.h>
 #include <qmath.h>
 #include <private/qmath_p.h>
 
+#include "simplewidgets.h" // let spinbox use line edit's interface
+
 QT_BEGIN_NAMESPACE
 
 #ifndef QT_NO_ACCESSIBILITY
-extern QString Q_GUI_EXPORT qt_accStripAmp(const QString &text);
-#ifndef QT_NO_SCROLLBAR
-extern QStyleOptionSlider Q_GUI_EXPORT qt_qscrollbarStyleOption(QScrollBar *scrollBar);
-#endif
-#ifndef QT_NO_SLIDER
-extern QStyleOptionSlider Q_GUI_EXPORT qt_qsliderStyleOption(QSlider *slider);
-#endif
 
 #ifndef QT_NO_SPINBOX
 QAccessibleAbstractSpinBox::QAccessibleAbstractSpinBox(QWidget *w)
-: QAccessibleWidget(w, QAccessible::SpinBox)
+: QAccessibleWidget(w, QAccessible::SpinBox), lineEdit(Q_NULLPTR)
 {
     Q_ASSERT(abstractSpinBox());
 }
 
+QAccessibleAbstractSpinBox::~QAccessibleAbstractSpinBox()
+{
+    delete lineEdit;
+}
+
 /*!
     Returns the underlying QAbstractSpinBox.
 */
@@ -80,6 +73,14 @@ QAbstractSpinBox *QAccessibleAbstractSpinBox::abstractSpinBox() const
     return qobject_cast<QAbstractSpinBox*>(object());
 }
 
+QAccessibleInterface *QAccessibleAbstractSpinBox::lineEditIface() const
+{
+    // QAccessibleLineEdit is only used to forward the text functions
+    if (!lineEdit)
+        lineEdit = new QAccessibleLineEdit(abstractSpinBox()->lineEdit());
+    return lineEdit;
+}
+
 QString QAccessibleAbstractSpinBox::text(QAccessible::Text t) const
 {
     if (t == QAccessible::Value)
@@ -91,20 +92,16 @@ void *QAccessibleAbstractSpinBox::interface_cast(QAccessible::InterfaceType t)
 {
     if (t == QAccessible::ValueInterface)
         return static_cast<QAccessibleValueInterface*>(this);
+    if (t == QAccessible::TextInterface)
+        return static_cast<QAccessibleTextInterface*>(this);
+    if (t == QAccessible::EditableTextInterface)
+        return static_cast<QAccessibleEditableTextInterface*>(this);
     return QAccessibleWidget::interface_cast(t);
 }
 
 QVariant QAccessibleAbstractSpinBox::currentValue() const
 {
-    QVariant result = abstractSpinBox()->property("value");
-    QVariant::Type type = result.type();
-
-    // IA2 only allows numeric types
-    if (type == QVariant::Int || type == QVariant::UInt || type == QVariant::LongLong
-        || type == QVariant::ULongLong || type == QVariant::Double)
-        return result;
-
-    return QVariant();
+    return abstractSpinBox()->property("value");
 }
 
 void QAccessibleAbstractSpinBox::setCurrentValue(const QVariant &value)
@@ -127,6 +124,102 @@ QVariant QAccessibleAbstractSpinBox::minimumStepSize() const
     return abstractSpinBox()->property("stepSize");
 }
 
+void QAccessibleAbstractSpinBox::addSelection(int startOffset, int endOffset)
+{
+    lineEditIface()->textInterface()->addSelection(startOffset, endOffset);
+}
+
+QString QAccessibleAbstractSpinBox::attributes(int offset, int *startOffset, int *endOffset) const
+{
+    return lineEditIface()->textInterface()->attributes(offset, startOffset, endOffset);
+}
+
+int QAccessibleAbstractSpinBox::cursorPosition() const
+{
+    return lineEditIface()->textInterface()->cursorPosition();
+}
+
+QRect QAccessibleAbstractSpinBox::characterRect(int offset) const
+{
+    return lineEditIface()->textInterface()->characterRect(offset);
+}
+
+int QAccessibleAbstractSpinBox::selectionCount() const
+{
+    return lineEditIface()->textInterface()->selectionCount();
+}
+
+int QAccessibleAbstractSpinBox::offsetAtPoint(const QPoint &point) const
+{
+    return lineEditIface()->textInterface()->offsetAtPoint(point);
+}
+
+void QAccessibleAbstractSpinBox::selection(int selectionIndex, int *startOffset, int *endOffset) const
+{
+    lineEditIface()->textInterface()->selection(selectionIndex, startOffset, endOffset);
+}
+
+QString QAccessibleAbstractSpinBox::text(int startOffset, int endOffset) const
+{
+    return lineEditIface()->textInterface()->text(startOffset, endOffset);
+}
+
+QString QAccessibleAbstractSpinBox::textBeforeOffset(int offset, QAccessible::TextBoundaryType boundaryType, int *startOffset, int *endOffset) const
+{
+    return lineEditIface()->textInterface()->textBeforeOffset(offset, boundaryType, startOffset, endOffset);
+}
+
+QString QAccessibleAbstractSpinBox::textAfterOffset(int offset, QAccessible::TextBoundaryType boundaryType, int *startOffset, int *endOffset) const
+{
+    return lineEditIface()->textInterface()->textAfterOffset(offset, boundaryType, startOffset, endOffset);
+}
+
+QString QAccessibleAbstractSpinBox::textAtOffset(int offset, QAccessible::TextBoundaryType boundaryType, int *startOffset, int *endOffset) const
+{
+    return lineEditIface()->textInterface()->textAtOffset(offset, boundaryType, startOffset, endOffset);
+}
+
+void QAccessibleAbstractSpinBox::removeSelection(int selectionIndex)
+{
+    lineEditIface()->textInterface()->removeSelection(selectionIndex);
+}
+
+void QAccessibleAbstractSpinBox::setCursorPosition(int position)
+{
+    lineEditIface()->textInterface()->setCursorPosition(position);
+}
+
+void QAccessibleAbstractSpinBox::setSelection(int selectionIndex, int startOffset, int endOffset)
+{
+    lineEditIface()->textInterface()->setSelection(selectionIndex, startOffset, endOffset);
+}
+
+int QAccessibleAbstractSpinBox::characterCount() const
+{
+    return lineEditIface()->textInterface()->characterCount();
+}
+
+void QAccessibleAbstractSpinBox::scrollToSubstring(int startIndex, int endIndex)
+{
+    lineEditIface()->textInterface()->scrollToSubstring(startIndex, endIndex);
+}
+
+void QAccessibleAbstractSpinBox::deleteText(int startOffset, int endOffset)
+{
+    lineEditIface()->editableTextInterface()->deleteText(startOffset, endOffset);
+}
+
+void QAccessibleAbstractSpinBox::insertText(int offset, const QString &text)
+{
+    lineEditIface()->editableTextInterface()->insertText(offset, text);
+}
+
+void QAccessibleAbstractSpinBox::replaceText(int startOffset, int endOffset, const QString &text)
+{
+    lineEditIface()->editableTextInterface()->replaceText(startOffset, endOffset, text);
+}
+
+
 /*!
   \class QAccessibleSpinBox
   \brief The QAccessibleSpinBox class implements the QAccessibleInterface for spinbox widgets.
diff --git a/src/plugins/accessible/widgets/rangecontrols.h b/src/widgets/accessible/rangecontrols.h
index dd69788bb1..ca609bc238 100644
--- a/src/plugins/accessible/widgets/rangecontrols.h
+++ b/src/widgets/accessible/rangecontrols.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,12 +47,18 @@ class QSlider;
 class QSpinBox;
 class QDoubleSpinBox;
 class QDial;
+class QAccessibleLineEdit;
 
 #ifndef QT_NO_SPINBOX
-class QAccessibleAbstractSpinBox: public QAccessibleWidget, public QAccessibleValueInterface // TODO, public QAccessibleActionInterface
+class QAccessibleAbstractSpinBox:
+        public QAccessibleWidget,
+        public QAccessibleValueInterface,
+        public QAccessibleTextInterface,
+        public QAccessibleEditableTextInterface
 {
 public:
     explicit QAccessibleAbstractSpinBox(QWidget *w);
+    virtual ~QAccessibleAbstractSpinBox();
 
     QString text(QAccessible::Text t) const Q_DECL_OVERRIDE;
     void *interface_cast(QAccessible::InterfaceType t) Q_DECL_OVERRIDE;
@@ -72,10 +70,37 @@ public:
     QVariant minimumValue() const Q_DECL_OVERRIDE;
     QVariant minimumStepSize() const Q_DECL_OVERRIDE;
 
-    // FIXME Action interface
+    // QAccessibleTextInterface
+    void addSelection(int startOffset, int endOffset) Q_DECL_OVERRIDE;
+    QString attributes(int offset, int *startOffset, int *endOffset) const Q_DECL_OVERRIDE;
+    int cursorPosition() const Q_DECL_OVERRIDE;
+    QRect characterRect(int offset) const Q_DECL_OVERRIDE;
+    int selectionCount() const Q_DECL_OVERRIDE;
+    int offsetAtPoint(const QPoint &point) const Q_DECL_OVERRIDE;
+    void selection(int selectionIndex, int *startOffset, int *endOffset) const Q_DECL_OVERRIDE;
+    QString text(int startOffset, int endOffset) const Q_DECL_OVERRIDE;
+    QString textBeforeOffset (int offset, QAccessible::TextBoundaryType boundaryType,
+            int *endOffset, int *startOffset) const Q_DECL_OVERRIDE;
+    QString textAfterOffset(int offset, QAccessible::TextBoundaryType boundaryType,
+            int *startOffset, int *endOffset) const Q_DECL_OVERRIDE;
+    QString textAtOffset(int offset, QAccessible::TextBoundaryType boundaryType,
+            int *startOffset, int *endOffset) const Q_DECL_OVERRIDE;
+    void removeSelection(int selectionIndex) Q_DECL_OVERRIDE;
+    void setCursorPosition(int position) Q_DECL_OVERRIDE;
+    void setSelection(int selectionIndex, int startOffset, int endOffset) Q_DECL_OVERRIDE;
+    int characterCount() const Q_DECL_OVERRIDE;
+    void scrollToSubstring(int startIndex, int endIndex) Q_DECL_OVERRIDE;
+
+    // QAccessibleEditableTextInterface
+    void deleteText(int startOffset, int endOffset) Q_DECL_OVERRIDE;
+    void insertText(int offset, const QString &text) Q_DECL_OVERRIDE;
+    void replaceText(int startOffset, int endOffset, const QString &text) Q_DECL_OVERRIDE;
 
 protected:
     QAbstractSpinBox *abstractSpinBox() const;
+    QAccessibleInterface *lineEditIface() const;
+private:
+    mutable QAccessibleLineEdit *lineEdit;
 };
 
 class QAccessibleSpinBox : public QAccessibleAbstractSpinBox
@@ -94,6 +119,7 @@ public:
 
     QString text(QAccessible::Text t) const Q_DECL_OVERRIDE;
 
+    using QAccessibleAbstractSpinBox::text;
 protected:
     QDoubleSpinBox *doubleSpinBox() const;
 };
diff --git a/src/plugins/accessible/widgets/simplewidgets.cpp b/src/widgets/accessible/simplewidgets.cpp
index a5365b2598..ade5cfe3dc 100644
--- a/src/plugins/accessible/widgets/simplewidgets.cpp
+++ b/src/widgets/accessible/simplewidgets.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,10 +61,10 @@ QT_BEGIN_NAMESPACE
 
 #ifndef QT_NO_ACCESSIBILITY
 
-extern QList<QWidget*> childWidgets(const QWidget *widget, bool includeTopLevel = false);
+extern QList<QWidget*> childWidgets(const QWidget *widget);
 
-QString Q_GUI_EXPORT qt_accStripAmp(const QString &text);
-QString Q_GUI_EXPORT qt_accHotKey(const QString &text);
+QString qt_accStripAmp(const QString &text);
+QString qt_accHotKey(const QString &text);
 
 /*!
   \class QAccessibleButton
@@ -84,12 +76,14 @@ QString Q_GUI_EXPORT qt_accHotKey(const QString &text);
 
 /*!
   Creates a QAccessibleButton object for \a w.
-  \a role is propagated to the QAccessibleWidget constructor.
 */
-QAccessibleButton::QAccessibleButton(QWidget *w, QAccessible::Role role)
-: QAccessibleWidget(w, role)
+QAccessibleButton::QAccessibleButton(QWidget *w)
+: QAccessibleWidget(w)
 {
     Q_ASSERT(button());
+
+    // FIXME: The checkable state of the button is dynamic,
+    // while we only update the controlling signal once :(
     if (button()->isCheckable())
         addControllingSignal(QLatin1String("toggled(bool)"));
     else
@@ -121,14 +115,14 @@ QString QAccessibleButton::text(QAccessible::Text t) const
     case QAccessible::Name:
         str = widget()->accessibleName();
         if (str.isEmpty())
-            str = button()->text();
+            str = qt_accStripAmp(button()->text());
         break;
     default:
         break;
     }
     if (str.isEmpty())
         str = QAccessibleWidget::text(t);
-    return qt_accStripAmp(str);
+    return str;
 }
 
 QAccessible::State QAccessibleButton::state() const
@@ -158,6 +152,43 @@ QAccessible::State QAccessibleButton::state() const
     return state;
 }
 
+QRect QAccessibleButton::rect() const
+{
+    QAbstractButton *ab = button();
+    if (!ab->isVisible())
+        return QRect();
+
+    if (QCheckBox *cb = qobject_cast<QCheckBox *>(ab)) {
+        QPoint wpos = cb->mapToGlobal(QPoint(0, 0));
+        QStyleOptionButton opt;
+        cb->initStyleOption(&opt);
+        return cb->style()->subElementRect(QStyle::SE_CheckBoxClickRect, &opt, cb).translated(wpos);
+    } else if (QRadioButton *rb = qobject_cast<QRadioButton *>(ab)) {
+        QPoint wpos = rb->mapToGlobal(QPoint(0, 0));
+        QStyleOptionButton opt;
+        rb->initStyleOption(&opt);
+        return rb->style()->subElementRect(QStyle::SE_RadioButtonClickRect, &opt, rb).translated(wpos);
+    }
+    return QAccessibleWidget::rect();
+}
+
+QAccessible::Role QAccessibleButton::role() const
+{
+    QAbstractButton *ab = button();
+
+#ifndef QT_NO_MENU
+    if (QPushButton *pb = qobject_cast<QPushButton*>(ab)) {
+        if (pb->menu())
+            return QAccessible::ButtonMenu;
+    }
+#endif
+
+    if (ab->isCheckable())
+        return ab->autoExclusive() ? QAccessible::RadioButton : QAccessible::CheckBox;
+
+    return QAccessible::Button;
+}
+
 QStringList QAccessibleButton::actionNames() const
 {
     QStringList names;
@@ -224,10 +255,9 @@ QStringList QAccessibleButton::keyBindingsForAction(const QString &actionName) c
 
 /*!
   Creates a QAccessibleToolButton object for \a w.
-  \a role is propagated to the QAccessibleWidget constructor.
 */
-QAccessibleToolButton::QAccessibleToolButton(QWidget *w, QAccessible::Role role)
-: QAccessibleButton(w, role)
+QAccessibleToolButton::QAccessibleToolButton(QWidget *w)
+: QAccessibleButton(w)
 {
     Q_ASSERT(toolButton());
 }
@@ -267,6 +297,21 @@ int QAccessibleToolButton::childCount() const
     return isSplitButton() ? 1 : 0;
 }
 
+QAccessible::Role QAccessibleToolButton::role() const
+{
+    QAbstractButton *ab = button();
+
+#ifndef QT_NO_MENU
+    QToolButton *tb = qobject_cast<QToolButton*>(ab);
+    if (!tb->menu())
+        return tb->isCheckable() ? QAccessible::CheckBox : QAccessible::PushButton;
+    else if (tb->popupMode() == QToolButton::DelayedPopup)
+        return QAccessible::ButtonDropDown;
+#endif
+
+    return QAccessible::ButtonMenu;
+}
+
 QAccessibleInterface *QAccessibleToolButton::child(int index) const
 {
 #ifndef QT_NO_MENU
@@ -278,29 +323,6 @@ QAccessibleInterface *QAccessibleToolButton::child(int index) const
     return 0;
 }
 
-/*!
-    \internal
-
-    Returns the button's text label, depending on the text \a t, and
-    the \a child.
-*/
-QString QAccessibleToolButton::text(QAccessible::Text t) const
-{
-    QString str;
-    switch (t) {
-    case QAccessible::Name:
-        str = toolButton()->accessibleName();
-        if (str.isEmpty())
-            str = toolButton()->text();
-        break;
-    default:
-        break;
-    }
-    if (str.isEmpty())
-        str = QAccessibleButton::text(t);
-    return qt_accStripAmp(str);
-}
-
 /*
    The three different tool button types can have the following actions:
 | DelayedPopup    | ShowMenuAction + (PressedAction || CheckedAction) |
@@ -398,6 +420,8 @@ QString QAccessibleDisplay::text(QAccessible::Text t) const
                     doc.setHtml(str);
                     str = doc.toPlainText();
                 }
+                if (label->buddy())
+                    str = qt_accStripAmp(str);
 #ifndef QT_NO_LCDNUMBER
             } else if (qobject_cast<QLCDNumber*>(object())) {
                 QLCDNumber *l = qobject_cast<QLCDNumber*>(object());
@@ -422,7 +446,7 @@ QString QAccessibleDisplay::text(QAccessible::Text t) const
     }
     if (str.isEmpty())
         str = QAccessibleWidget::text(t);
-    return qt_accStripAmp(str);
+    return str;
 }
 
 /*! \reimp */
@@ -511,7 +535,10 @@ QString QAccessibleGroupBox::text(QAccessible::Text t) const
             txt = qt_accStripAmp(groupBox()->title());
             break;
         case QAccessible::Description:
-            txt = qt_accStripAmp(groupBox()->toolTip());
+            txt = groupBox()->toolTip();
+            break;
+        case QAccessible::Accelerator:
+            txt = qt_accHotKey(groupBox()->title());
             break;
         default:
             break;
@@ -606,13 +633,15 @@ QString QAccessibleLineEdit::text(QAccessible::Text t) const
     case QAccessible::Value:
         if (lineEdit()->echoMode() == QLineEdit::Normal)
             str = lineEdit()->text();
+        else if (lineEdit()->echoMode() != QLineEdit::NoEcho)
+            str = QString(lineEdit()->text().length(), QChar::fromLatin1('*'));
         break;
     default:
         break;
     }
     if (str.isEmpty())
         str = QAccessibleWidget::text(t);
-    return qt_accStripAmp(str);
+    return str;
 }
 
 void QAccessibleLineEdit::setText(QAccessible::Text t, const QString &text)
@@ -643,10 +672,8 @@ QAccessible::State QAccessibleLineEdit::state() const
 
     if (l->echoMode() != QLineEdit::Normal)
         state.passwordEdit = true;
-    state.selectable = true;
-    if (l->hasSelectedText())
-        state.selected = true;
 
+    state.selectableText = true;
     return state;
 }
 
@@ -732,6 +759,8 @@ QString QAccessibleLineEdit::textBeforeOffset(int offset, QAccessible::TextBound
         *startOffset = *endOffset = -1;
         return QString();
     }
+    if (offset == -2)
+        offset = cursorPosition();
     return QAccessibleTextInterface::textBeforeOffset(offset, boundaryType, startOffset, endOffset);
 }
 
@@ -742,6 +771,8 @@ QString QAccessibleLineEdit::textAfterOffset(int offset, QAccessible::TextBounda
         *startOffset = *endOffset = -1;
         return QString();
     }
+    if (offset == -2)
+        offset = cursorPosition();
     return QAccessibleTextInterface::textAfterOffset(offset, boundaryType, startOffset, endOffset);
 }
 
@@ -752,6 +783,8 @@ QString QAccessibleLineEdit::textAtOffset(int offset, QAccessible::TextBoundaryT
         *startOffset = *endOffset = -1;
         return QString();
     }
+    if (offset == -2)
+        offset = cursorPosition();
     return QAccessibleTextInterface::textAtOffset(offset, boundaryType, startOffset, endOffset);
 }
 
diff --git a/src/plugins/accessible/widgets/simplewidgets.h b/src/widgets/accessible/simplewidgets.h
index be19d8324f..8d4f3de4a7 100644
--- a/src/plugins/accessible/widgets/simplewidgets.h
+++ b/src/widgets/accessible/simplewidgets.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the plugins of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,10 +51,12 @@ class QAccessibleButton : public QAccessibleWidget
 {
     Q_DECLARE_TR_FUNCTIONS(QAccessibleButton)
 public:
-    QAccessibleButton(QWidget *w, QAccessible::Role r);
+    QAccessibleButton(QWidget *w);
 
     QString text(QAccessible::Text t) const Q_DECL_OVERRIDE;
     QAccessible::State state() const Q_DECL_OVERRIDE;
+    QRect rect() const Q_DECL_OVERRIDE;
+    QAccessible::Role role() const Q_DECL_OVERRIDE;
 
     QStringList actionNames() const Q_DECL_OVERRIDE;
     void doAction(const QString &actionName) Q_DECL_OVERRIDE;
@@ -76,15 +70,14 @@ protected:
 class QAccessibleToolButton : public QAccessibleButton
 {
 public:
-    QAccessibleToolButton(QWidget *w, QAccessible::Role role);
+    QAccessibleToolButton(QWidget *w);
 
     QAccessible::State state() const Q_DECL_OVERRIDE;
+    QAccessible::Role role() const Q_DECL_OVERRIDE;
 
     int childCount() const Q_DECL_OVERRIDE;
     QAccessibleInterface *child(int index) const Q_DECL_OVERRIDE;
 
-    QString text(QAccessible::Text t) const Q_DECL_OVERRIDE;
-
     // QAccessibleActionInterface
     QStringList actionNames() const Q_DECL_OVERRIDE;
     void doAction(const QString &actionName) Q_DECL_OVERRIDE;
@@ -173,6 +166,7 @@ public:
     void replaceText(int startOffset, int endOffset, const QString &text) Q_DECL_OVERRIDE;
 protected:
     QLineEdit *lineEdit() const;
+    friend class QAccessibleAbstractSpinBox;
 };
 #endif // QT_NO_LINEEDIT
 
diff --git a/src/plugins/accessible/widgets/widgets.pro b/src/widgets/accessible/widgets.pro
index c6af6d3f71..c6af6d3f71 100644
--- a/src/plugins/accessible/widgets/widgets.pro
+++ b/src/widgets/accessible/widgets.pro
diff --git a/src/widgets/dialogs/qcolordialog.cpp b/src/widgets/dialogs/qcolordialog.cpp
index 3889a589c7..b92e1a24ad 100644
--- a/src/widgets/dialogs/qcolordialog.cpp
+++ b/src/widgets/dialogs/qcolordialog.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1262,9 +1254,17 @@ QColorShower::QColorShower(QColorDialog *parent)
     lblHtml->setBuddy(htEd);
 #endif
 
+#if !defined(QT_NO_REGULAREXPRESSION)
     QRegularExpression regExp(QStringLiteral("#([A-Fa-f0-9]{6}|[A-Fa-f0-9]{3})"));
     QRegularExpressionValidator *validator = new QRegularExpressionValidator(regExp, this);
     htEd->setValidator(validator);
+#elif !defined(QT_NO_REGEXP)
+    QRegExp regExp(QStringLiteral("#([A-Fa-f0-9]{6}|[A-Fa-f0-9]{3})"));
+    QRegExpValidator *validator = new QRegExpValidator(regExp, this);
+    htEd->setValidator(validator);
+#else
+    htEd->setReadOnly(true);
+#endif
 
     lblHtml->setAlignment(Qt::AlignRight|Qt::AlignVCenter);
     gl->addWidget(lblHtml, 5, 1);
@@ -1460,38 +1460,46 @@ void QColorDialogPrivate::setCurrentQColor(const QColor &color)
     }
 }
 
+// size of standard and custom color selector
+enum {
+    colorColumns = 8,
+    standardColorRows = 6,
+    customColorRows = 2
+};
+
 bool QColorDialogPrivate::selectColor(const QColor &col)
 {
     QRgb color = col.rgb();
-    int i = 0, j = 0;
     // Check standard colors
     if (standard) {
         const QRgb *standardColors = QColorDialogOptions::standardColors();
-        for (i = 0; i < 6; i++) {
-            for (j = 0; j < 8; j++) {
-                if (color == standardColors[i + j*6]) {
-                    _q_newStandard(i, j);
-                    standard->setCurrent(i, j);
-                    standard->setSelected(i, j);
-                    standard->setFocus();
-                    return true;
-                }
-            }
+        const QRgb *standardColorsEnd = standardColors + standardColorRows * colorColumns;
+        const QRgb *match = std::find(standardColors, standardColorsEnd, color);
+        if (match != standardColorsEnd) {
+            const int index = int(match - standardColors);
+            const int row = index / standardColorRows;
+            const int column = index % standardColorRows;
+            _q_newStandard(row, column);
+            standard->setCurrent(row, column);
+            standard->setSelected(row, column);
+            standard->setFocus();
+            return true;
         }
     }
     // Check custom colors
     if (custom) {
         const QRgb *customColors = QColorDialogOptions::customColors();
-        for (i = 0; i < 2; i++) {
-            for (j = 0; j < 8; j++) {
-                if (color == customColors[i + j*2]) {
-                    _q_newCustom(i, j);
-                    custom->setCurrent(i, j);
-                    custom->setSelected(i, j);
-                    custom->setFocus();
-                    return true;
-                }
-            }
+        const QRgb *customColorsEnd = customColors + customColorRows * colorColumns;
+        const QRgb *match = std::find(customColors, customColorsEnd, color);
+        if (match != customColorsEnd) {
+            const int index = int(match - customColors);
+            const int row = index / customColorRows;
+            const int column = index % customColorRows;
+            _q_newCustom(row, column);
+            custom->setCurrent(row, column);
+            custom->setSelected(row, column);
+            custom->setFocus();
+            return true;
         }
     }
     return false;
@@ -1519,12 +1527,12 @@ void QColorDialogPrivate::_q_newColorTypedIn(QRgb rgb)
 
 void QColorDialogPrivate::_q_nextCustom(int r, int c)
 {
-    nextCust = r + 2 * c;
+    nextCust = r + customColorRows * c;
 }
 
 void QColorDialogPrivate::_q_newCustom(int r, int c)
 {
-    const int i = r + 2 * c;
+    const int i = r + customColorRows * c;
     setCurrentRgbColor(QColorDialogOptions::customColor(i));
     if (standard)
         standard->setSelected(-1,-1);
@@ -1545,12 +1553,10 @@ void QColorDialogPrivate::_q_pickScreenColor()
     q->installEventFilter(colorPickingEventFilter);
     // If user pushes Escape, the last color before picking will be restored.
     beforeScreenColorPicking = cs->currentColor();
-    /*For some reason, q->grabMouse(Qt::CrossCursor) doesn't change
-     * the cursor, and therefore I have to change it manually.
-     */
-    q->grabMouse();
 #ifndef QT_NO_CURSOR
-    q->setCursor(Qt::CrossCursor);
+    q->grabMouse(Qt::CrossCursor);
+#else
+    q->grabMouse();
 #endif
     q->grabKeyboard();
     /* With setMouseTracking(true) the desired color can be more precisedly picked up,
@@ -1575,9 +1581,6 @@ void QColorDialogPrivate::releaseColorPicking()
     q->removeEventFilter(colorPickingEventFilter);
     q->releaseMouse();
     q->releaseKeyboard();
-#ifndef QT_NO_CURSOR
-    q->setCursor(Qt::ArrowCursor);
-#endif
     q->setMouseTracking(false);
     lblScreenColorInfo->setText(QLatin1String("\n"));
     addCusBt->setDisabled(false);
@@ -1635,7 +1638,7 @@ void QColorDialogPrivate::initWidgets()
     }
 
     if (!smallDisplay) {
-        standard = new QColorWell(q, 6, 8, QColorDialogOptions::standardColors());
+        standard = new QColorWell(q, standardColorRows, colorColumns, QColorDialogOptions::standardColors());
         lblBasicColors = new QLabel(q);
 #ifndef QT_NO_SHORTCUT
         lblBasicColors->setBuddy(standard);
@@ -1657,7 +1660,7 @@ void QColorDialogPrivate::initWidgets()
         leftLay->addStretch();
 #endif
 
-        custom = new QColorWell(q, 2, 8, QColorDialogOptions::customColors());
+        custom = new QColorWell(q, customColorRows, colorColumns, QColorDialogOptions::customColors());
         custom->setAcceptDrops(true);
 
         q->connect(custom, SIGNAL(selected(int,int)), SLOT(_q_newCustom(int,int)));
diff --git a/src/widgets/dialogs/qcolordialog.h b/src/widgets/dialogs/qcolordialog.h
index c74ee6720a..d23254a2b2 100644
--- a/src/widgets/dialogs/qcolordialog.h
+++ b/src/widgets/dialogs/qcolordialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qcolordialog_p.h b/src/widgets/dialogs/qcolordialog_p.h
index feabce4bbf..af3ebe8925 100644
--- a/src/widgets/dialogs/qcolordialog_p.h
+++ b/src/widgets/dialogs/qcolordialog_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qdialog.cpp b/src/widgets/dialogs/qdialog.cpp
index d498b077fc..6de3ff8c15 100644
--- a/src/widgets/dialogs/qdialog.cpp
+++ b/src/widgets/dialogs/qdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qdialog.h b/src/widgets/dialogs/qdialog.h
index efbc475118..338f05f94d 100644
--- a/src/widgets/dialogs/qdialog.h
+++ b/src/widgets/dialogs/qdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qdialog_p.h b/src/widgets/dialogs/qdialog_p.h
index 8db1b2a27c..9cf3f102da 100644
--- a/src/widgets/dialogs/qdialog_p.h
+++ b/src/widgets/dialogs/qdialog_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qerrormessage.cpp b/src/widgets/dialogs/qerrormessage.cpp
index cc79582cb0..6bab921d21 100644
--- a/src/widgets/dialogs/qerrormessage.cpp
+++ b/src/widgets/dialogs/qerrormessage.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qerrormessage.h b/src/widgets/dialogs/qerrormessage.h
index 6be063b57b..0925923d96 100644
--- a/src/widgets/dialogs/qerrormessage.h
+++ b/src/widgets/dialogs/qerrormessage.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfiledialog.cpp b/src/widgets/dialogs/qfiledialog.cpp
index e53cdeac29..0ba3ea40e0 100644
--- a/src/widgets/dialogs/qfiledialog.cpp
+++ b/src/widgets/dialogs/qfiledialog.cpp
@@ -5,40 +5,34 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
+#define QT_NO_URL_CAST_FROM_STRING
+
 #include <qvariant.h>
 #include <private/qwidgetitemdata_p.h>
 #include "qfiledialog.h"
@@ -78,7 +72,7 @@ extern bool qt_priv_ptr_valid;
 
 QT_BEGIN_NAMESPACE
 
-Q_GLOBAL_STATIC(QString, lastVisitedDir)
+Q_GLOBAL_STATIC(QUrl, lastVisitedDir)
 
 /*!
   \class QFileDialog
@@ -373,7 +367,7 @@ QFileDialog::QFileDialog(QWidget *parent,
     : QDialog(*new QFileDialogPrivate, parent, 0)
 {
     Q_D(QFileDialog);
-    d->init(directory, filter, caption);
+    d->init(QUrl::fromLocalFile(directory), filter, caption);
 }
 
 /*!
@@ -444,7 +438,7 @@ static const qint32 QFileDialogMagic = 0xbe;
 QByteArray QFileDialog::saveState() const
 {
     Q_D(const QFileDialog);
-    int version = 3;
+    int version = 4;
     QByteArray data;
     QDataStream stream(&data, QIODevice::WriteOnly);
 
@@ -479,29 +473,35 @@ QByteArray QFileDialog::saveState() const
 bool QFileDialog::restoreState(const QByteArray &state)
 {
     Q_D(QFileDialog);
-    int version = 3;
     QByteArray sd = state;
     QDataStream stream(&sd, QIODevice::ReadOnly);
     if (stream.atEnd())
         return false;
     QStringList history;
-    QString currentDirectory;
+    QUrl currentDirectory;
     qint32 marker;
     qint32 v;
     qint32 viewMode;
     stream >> marker;
     stream >> v;
-    if (marker != QFileDialogMagic || v != version)
+    // the code below only supports versions 3 and 4
+    if (marker != QFileDialogMagic || (v != 3 && v != 4))
         return false;
 
     stream >> d->splitterState
            >> d->sidebarUrls
-           >> history
-           >> currentDirectory
-           >> d->headerData
+           >> history;
+    if (v == 3) {
+        QString currentDirectoryString;
+        stream >> currentDirectoryString;
+        currentDirectory = QUrl::fromLocalFile(currentDirectoryString);
+    } else {
+        stream >> currentDirectory;
+    }
+    stream >> d->headerData
            >> viewMode;
 
-    setDirectory(lastVisitedDir()->isEmpty() ? currentDirectory : *lastVisitedDir());
+    setDirectoryUrl(lastVisitedDir()->isEmpty() ? currentDirectory : *lastVisitedDir());
     setViewMode(static_cast<QFileDialog::ViewMode>(viewMode));
 
     if (!d->usingWidgets())
@@ -574,8 +574,8 @@ QFileDialogPrivate::~QFileDialogPrivate()
 void QFileDialogPrivate::initHelper(QPlatformDialogHelper *h)
 {
     QFileDialog *d = q_func();
-    QObject::connect(h, SIGNAL(fileSelected(QUrl)), d, SLOT(_q_nativeFileSelected(QUrl)));
-    QObject::connect(h, SIGNAL(filesSelected(QList<QUrl>)), d, SLOT(_q_nativeFilesSelected(QList<QUrl>)));
+    QObject::connect(h, SIGNAL(fileSelected(QUrl)), d, SLOT(_q_emitUrlSelected(QUrl)));
+    QObject::connect(h, SIGNAL(filesSelected(QList<QUrl>)), d, SLOT(_q_emitUrlsSelected(QList<QUrl>)));
     QObject::connect(h, SIGNAL(currentChanged(QUrl)), d, SLOT(_q_nativeCurrentChanged(QUrl)));
     QObject::connect(h, SIGNAL(directoryEntered(QUrl)), d, SLOT(_q_nativeEnterDirectory(QUrl)));
     QObject::connect(h, SIGNAL(filterSelected(QString)), d, SIGNAL(filterSelected(QString)));
@@ -627,7 +627,7 @@ void QFileDialogPrivate::retranslateWindowTitle()
     setWindowTitle = q->windowTitle();
 }
 
-void QFileDialogPrivate::setLastVisitedDirectory(const QString &dir)
+void QFileDialogPrivate::setLastVisitedDirectory(const QUrl &dir)
 {
     *lastVisitedDir() = dir;
 }
@@ -941,11 +941,12 @@ void QFileDialog::setDirectory(const QString &directory)
     if (!directory.isEmpty() && newDirectory.isEmpty())
         return;
 
-    d->setLastVisitedDirectory(newDirectory);
+    QUrl newDirUrl = QUrl::fromLocalFile(newDirectory);
+    d->setLastVisitedDirectory(newDirUrl);
 
     d->options->setInitialDirectory(QUrl::fromLocalFile(directory));
     if (!d->usingWidgets()) {
-        d->setDirectory_sys(QUrl::fromLocalFile(newDirectory));
+        d->setDirectory_sys(newDirUrl);
         return;
     }
     if (d->rootPath() == newDirectory)
@@ -992,6 +993,9 @@ void QFileDialog::setDirectoryUrl(const QUrl &directory)
     if (!directory.isValid())
         return;
 
+    d->setLastVisitedDirectory(directory);
+    d->options->setInitialDirectory(directory);
+
     if (d->nativeDialogInUse)
         d->setDirectory_sys(directory);
     else if (directory.isLocalFile())
@@ -2023,26 +2027,6 @@ QString QFileDialog::labelText(DialogLabel label) const
     return QString();
 }
 
-/*
-    For the native file dialogs
-*/
-
-#if defined(Q_WS_WIN)
-extern QString qt_win_get_open_file_name(const QFileDialogArgs &args,
-                                         QString *initialDirectory,
-                                         QString *selectedFilter);
-
-extern QString qt_win_get_save_file_name(const QFileDialogArgs &args,
-                                         QString *initialDirectory,
-                                         QString *selectedFilter);
-
-extern QStringList qt_win_get_open_file_names(const QFileDialogArgs &args,
-                                              QString *initialDirectory,
-                                              QString *selectedFilter);
-
-extern QString qt_win_get_existing_directory(const QFileDialogArgs &args);
-#endif
-
 /*!
     This is a convenience static function that returns an existing file
     selected by the user. If the user presses Cancel, it returns a null string.
@@ -2097,35 +2081,9 @@ QString QFileDialog::getOpenFileName(QWidget *parent,
                                QString *selectedFilter,
                                Options options)
 {
-    QFileDialogArgs args;
-    args.parent = parent;
-    args.caption = caption;
-    args.directory = QFileDialogPrivate::workingDirectory(dir);
-    args.selection = QFileDialogPrivate::initialSelection(dir);
-    args.filter = filter;
-    args.mode = ExistingFile;
-    args.options = options;
-#if defined(Q_WS_WIN)
-    if (QGuiApplicationPrivate::platformIntegration()->usePlatformNativeDialog() && !(args.options & DontUseNativeDialog)) {
-        return qt_win_get_open_file_name(args, &(args.directory), selectedFilter);
-    }
-#endif
-
-    // create a qt dialog
-    QFileDialog dialog(args);
-    if (selectedFilter && !selectedFilter->isEmpty())
-        dialog.selectNameFilter(*selectedFilter);
-    if (dialog.exec() == QDialog::Accepted) {
-        if (selectedFilter)
-            *selectedFilter = dialog.selectedNameFilter();
-        return dialog.selectedFiles().value(0);
-    }
-    return QString();
-}
-
-static inline QUrl dialogResultToUrl(const QString &file)
-{
-    return file.isEmpty() ? QUrl() : QUrl::fromLocalFile(file);
+    const QStringList schemes = QStringList(QStringLiteral("file"));
+    const QUrl selectedUrl = getOpenFileUrl(parent, caption, QUrl::fromLocalFile(dir), filter, selectedFilter, options, schemes);
+    return selectedUrl.toLocalFile();
 }
 
 /*!
@@ -2163,10 +2121,26 @@ QUrl QFileDialog::getOpenFileUrl(QWidget *parent,
                                  Options options,
                                  const QStringList &supportedSchemes)
 {
-    Q_UNUSED(supportedSchemes);
+    Q_UNUSED(supportedSchemes); // TODO
 
-    // Falls back to local file
-    return dialogResultToUrl(getOpenFileName(parent, caption, dir.toLocalFile(), filter, selectedFilter, options));
+    QFileDialogArgs args;
+    args.parent = parent;
+    args.caption = caption;
+    args.directory = QFileDialogPrivate::workingDirectory(dir);
+    args.selection = QFileDialogPrivate::initialSelection(dir);
+    args.filter = filter;
+    args.mode = ExistingFile;
+    args.options = options;
+
+    QFileDialog dialog(args);
+    if (selectedFilter && !selectedFilter->isEmpty())
+        dialog.selectNameFilter(*selectedFilter);
+    if (dialog.exec() == QDialog::Accepted) {
+        if (selectedFilter)
+            *selectedFilter = dialog.selectedNameFilter();
+        return dialog.selectedUrls().value(0);
+    }
+    return QUrl();
 }
 
 /*!
@@ -2225,31 +2199,12 @@ QStringList QFileDialog::getOpenFileNames(QWidget *parent,
                                           QString *selectedFilter,
                                           Options options)
 {
-    QFileDialogArgs args;
-    args.parent = parent;
-    args.caption = caption;
-    args.directory = QFileDialogPrivate::workingDirectory(dir);
-    args.selection = QFileDialogPrivate::initialSelection(dir);
-    args.filter = filter;
-    args.mode = ExistingFiles;
-    args.options = options;
-
-#if defined(Q_WS_WIN)
-    if (QGuiApplicationPrivate::platformIntegration()->usePlatformNativeDialog() && !(args.options & DontUseNativeDialog)) {
-        return qt_win_get_open_file_names(args, &(args.directory), selectedFilter);
-    }
-#endif
-
-    // create a qt dialog
-    QFileDialog dialog(args);
-    if (selectedFilter && !selectedFilter->isEmpty())
-        dialog.selectNameFilter(*selectedFilter);
-    if (dialog.exec() == QDialog::Accepted) {
-        if (selectedFilter)
-            *selectedFilter = dialog.selectedNameFilter();
-        return dialog.selectedFiles();
-    }
-    return QStringList();
+    const QStringList schemes = QStringList(QStringLiteral("file"));
+    const QList<QUrl> selectedUrls = getOpenFileUrls(parent, caption, QUrl::fromLocalFile(dir), filter, selectedFilter, options, schemes);
+    QStringList fileNames;
+    foreach (const QUrl &url, selectedUrls)
+        fileNames << url.toLocalFile();
+    return fileNames;
 }
 
 /*!
@@ -2290,14 +2245,24 @@ QList<QUrl> QFileDialog::getOpenFileUrls(QWidget *parent,
 {
     Q_UNUSED(supportedSchemes);
 
-    // Falls back to local files
-    QList<QUrl> urls;
-
-    const QStringList fileNames = getOpenFileNames(parent, caption, dir.toLocalFile(), filter, selectedFilter, options);
-    foreach (const QString &fileName, fileNames)
-        urls << QUrl::fromLocalFile(fileName);
+    QFileDialogArgs args;
+    args.parent = parent;
+    args.caption = caption;
+    args.directory = QFileDialogPrivate::workingDirectory(dir);
+    args.selection = QFileDialogPrivate::initialSelection(dir);
+    args.filter = filter;
+    args.mode = ExistingFiles;
+    args.options = options;
 
-    return urls;
+    QFileDialog dialog(args);
+    if (selectedFilter && !selectedFilter->isEmpty())
+        dialog.selectNameFilter(*selectedFilter);
+    if (dialog.exec() == QDialog::Accepted) {
+        if (selectedFilter)
+            *selectedFilter = dialog.selectedNameFilter();
+        return dialog.selectedUrls();
+    }
+    return QList<QUrl>();
 }
 
 /*!
@@ -2357,33 +2322,9 @@ QString QFileDialog::getSaveFileName(QWidget *parent,
                                      QString *selectedFilter,
                                      Options options)
 {
-    QFileDialogArgs args;
-    args.parent = parent;
-    args.caption = caption;
-    args.directory = QFileDialogPrivate::workingDirectory(dir);
-    args.selection = QFileDialogPrivate::initialSelection(dir);
-    args.filter = filter;
-    args.mode = AnyFile;
-    args.options = options;
-
-#if defined(Q_WS_WIN)
-    if (QGuiApplicationPrivate::platformIntegration()->usePlatformNativeDialog() && !(args.options & DontUseNativeDialog)) {
-        return qt_win_get_save_file_name(args, &(args.directory), selectedFilter);
-    }
-#endif
-
-    // create a qt dialog
-    QFileDialog dialog(args);
-    dialog.setAcceptMode(AcceptSave);
-    if (selectedFilter && !selectedFilter->isEmpty())
-        dialog.selectNameFilter(*selectedFilter);
-    if (dialog.exec() == QDialog::Accepted) {
-        if (selectedFilter)
-            *selectedFilter = dialog.selectedNameFilter();
-        return dialog.selectedFiles().value(0);
-    }
-
-    return QString();
+    const QStringList schemes = QStringList(QStringLiteral("file"));
+    const QUrl selectedUrl = getSaveFileUrl(parent, caption, QUrl::fromLocalFile(dir), filter, selectedFilter, options, schemes);
+    return selectedUrl.toLocalFile();
 }
 
 /*!
@@ -2423,8 +2364,25 @@ QUrl QFileDialog::getSaveFileUrl(QWidget *parent,
 {
     Q_UNUSED(supportedSchemes);
 
-    // Falls back to local file
-    return dialogResultToUrl(getSaveFileName(parent, caption, dir.toLocalFile(), filter, selectedFilter, options));
+    QFileDialogArgs args;
+    args.parent = parent;
+    args.caption = caption;
+    args.directory = QFileDialogPrivate::workingDirectory(dir);
+    args.selection = QFileDialogPrivate::initialSelection(dir);
+    args.filter = filter;
+    args.mode = AnyFile;
+    args.options = options;
+
+    QFileDialog dialog(args);
+    dialog.setAcceptMode(AcceptSave);
+    if (selectedFilter && !selectedFilter->isEmpty())
+        dialog.selectNameFilter(*selectedFilter);
+    if (dialog.exec() == QDialog::Accepted) {
+        if (selectedFilter)
+            *selectedFilter = dialog.selectedNameFilter();
+        return dialog.selectedUrls().value(0);
+    }
+    return QUrl();
 }
 
 /*!
@@ -2471,29 +2429,9 @@ QString QFileDialog::getExistingDirectory(QWidget *parent,
                                           const QString &dir,
                                           Options options)
 {
-    QFileDialogArgs args;
-    args.parent = parent;
-    args.caption = caption;
-    args.directory = QFileDialogPrivate::workingDirectory(dir);
-    args.mode = (options & ShowDirsOnly ? DirectoryOnly : Directory);
-    args.options = options;
-
-#if defined(Q_WS_WIN)
-    if (QGuiApplicationPrivate::platformIntegration()->usePlatformNativeDialog() && !(args.options & DontUseNativeDialog) && (options & ShowDirsOnly)
-#if defined(Q_OS_WINCE)
-        && qt_priv_ptr_valid
-#endif
-        ) {
-        return qt_win_get_existing_directory(args);
-    }
-#endif
-
-    // create a qt dialog
-    QFileDialog dialog(args);
-    if (dialog.exec() == QDialog::Accepted) {
-        return dialog.selectedFiles().value(0);
-    }
-    return QString();
+    const QStringList schemes = QStringList(QStringLiteral("file"));
+    const QUrl selectedUrl = getExistingDirectoryUrl(parent, caption, QUrl::fromLocalFile(dir), options, schemes);
+    return selectedUrl.toLocalFile();
 }
 
 /*!
@@ -2531,36 +2469,49 @@ QUrl QFileDialog::getExistingDirectoryUrl(QWidget *parent,
 {
     Q_UNUSED(supportedSchemes);
 
-    // Falls back to local file
-    return dialogResultToUrl(getExistingDirectory(parent, caption, dir.toLocalFile(), options));
+    QFileDialogArgs args;
+    args.parent = parent;
+    args.caption = caption;
+    args.directory = QFileDialogPrivate::workingDirectory(dir);
+    args.mode = (options & ShowDirsOnly ? DirectoryOnly : Directory);
+    args.options = options;
+
+    QFileDialog dialog(args);
+    if (dialog.exec() == QDialog::Accepted)
+        return dialog.selectedUrls().value(0);
+    return QUrl();
 }
 
-inline static QString _qt_get_directory(const QString &path)
+inline static QUrl _qt_get_directory(const QUrl &url)
 {
-    QFileInfo info = QFileInfo(QDir::current(), path);
-    if (info.exists() && info.isDir())
-        return QDir::cleanPath(info.absoluteFilePath());
-    info.setFile(info.absolutePath());
-    if (info.exists() && info.isDir())
-        return info.absoluteFilePath();
-    return QString();
+    if (url.isLocalFile()) {
+        QFileInfo info = QFileInfo(QDir::current(), url.toLocalFile());
+        if (info.exists() && info.isDir())
+            return QUrl::fromLocalFile(QDir::cleanPath(info.absoluteFilePath()));
+        info.setFile(info.absolutePath());
+        if (info.exists() && info.isDir())
+            return QUrl::fromLocalFile(info.absoluteFilePath());
+        return QUrl();
+    } else {
+        return url;
+    }
 }
 /*
-    Get the initial directory path
+    Get the initial directory URL
 
     \sa initialSelection()
  */
-QString QFileDialogPrivate::workingDirectory(const QString &path)
+QUrl QFileDialogPrivate::workingDirectory(const QUrl &url)
 {
-    if (!path.isEmpty()) {
-        QString directory = _qt_get_directory(path);
+    if (!url.isEmpty()) {
+        QUrl directory = _qt_get_directory(url);
         if (!directory.isEmpty())
             return directory;
     }
-    QString directory = _qt_get_directory(*lastVisitedDir());
+    QUrl directory = _qt_get_directory(*lastVisitedDir());
     if (!directory.isEmpty())
         return directory;
-    return QDir::currentPath();
+    return QUrl::fromLocalFile(QDir::currentPath());
 }
 
 /*
@@ -2570,14 +2521,19 @@ QString QFileDialogPrivate::workingDirectory(const QString &path)
 
     \sa workingDirectory()
  */
-QString QFileDialogPrivate::initialSelection(const QString &path)
+QString QFileDialogPrivate::initialSelection(const QUrl &url)
 {
-    if (!path.isEmpty()) {
-        QFileInfo info(path);
+    if (url.isEmpty())
+        return QString();
+    if (url.isLocalFile()) {
+        QFileInfo info(url.toLocalFile());
         if (!info.isDir())
             return info.fileName();
+        else
+            return QString();
     }
-    return QString();
+    // With remote URLs we can only assume.
+    return url.fileName();
 }
 
 /*!
@@ -2604,15 +2560,20 @@ void QFileDialog::done(int result)
 void QFileDialog::accept()
 {
     Q_D(QFileDialog);
-    QStringList files = selectedFiles();
-    if (files.isEmpty())
-        return;
     if (!d->usingWidgets()) {
-        d->emitFilesSelected(files);
+        const QList<QUrl> urls = selectedUrls();
+        if (urls.isEmpty())
+            return;
+        d->_q_emitUrlsSelected(urls);
+        if (urls.count() == 1)
+            d->_q_emitUrlSelected(urls.first());
         QDialog::accept();
         return;
     }
 
+    QStringList files = selectedFiles();
+    if (files.isEmpty())
+        return;
     QString lineEditText = d->lineEdit()->text();
     // "hidden feature" type .. and then enter, and it will move up a dir
     // special case for ".."
@@ -2709,7 +2670,7 @@ void QFileDialog::accept()
 
     Create widgets, layout and set default values
 */
-void QFileDialogPrivate::init(const QString &directory, const QString &nameFilter,
+void QFileDialogPrivate::init(const QUrl &directory, const QString &nameFilter,
                               const QString &caption)
 {
     Q_Q(QFileDialog);
@@ -2726,7 +2687,7 @@ void QFileDialogPrivate::init(const QString &directory, const QString &nameFilte
     q->setFileMode(QFileDialog::AnyFile);
     if (!nameFilter.isEmpty())
         q->setNameFilter(nameFilter);
-    q->setDirectory(workingDirectory(directory));
+    q->setDirectoryUrl(workingDirectory(directory));
     q->selectFile(initialSelection(directory));
 
 #ifndef QT_NO_SETTINGS
@@ -2775,7 +2736,7 @@ void QFileDialogPrivate::createWidgets()
     qFileDialogUi->setupUi(q);
 
     QList<QUrl> initialBookmarks;
-    initialBookmarks << QUrl::fromLocalFile(QLatin1String(""))
+    initialBookmarks << QUrl(QLatin1String("file:"))
                      << QUrl::fromLocalFile(QDir::homePath());
     qFileDialogUi->sidebar->setModelAndUrls(model, initialBookmarks);
     QFileDialog::connect(qFileDialogUi->sidebar, SIGNAL(goToUrl(QUrl)),
@@ -3643,7 +3604,7 @@ void QFileDialogPrivate::_q_fileRenamed(const QString &path, const QString oldNa
     }
 }
 
-void QFileDialogPrivate::_q_nativeFileSelected(const QUrl &file)
+void QFileDialogPrivate::_q_emitUrlSelected(const QUrl &file)
 {
     Q_Q(QFileDialog);
     emit q->urlSelected(file);
@@ -3651,7 +3612,7 @@ void QFileDialogPrivate::_q_nativeFileSelected(const QUrl &file)
         emit q->fileSelected(file.toLocalFile());
 }
 
-void QFileDialogPrivate::_q_nativeFilesSelected(const QList<QUrl> &files)
+void QFileDialogPrivate::_q_emitUrlsSelected(const QList<QUrl> &files)
 {
     Q_Q(QFileDialog);
     emit q->urlsSelected(files);
@@ -3675,9 +3636,10 @@ void QFileDialogPrivate::_q_nativeEnterDirectory(const QUrl &directory)
 {
     Q_Q(QFileDialog);
     emit q->directoryUrlEntered(directory);
-    if (!directory.isEmpty() && directory.isLocalFile()) { // Windows native dialogs occasionally emit signals with empty strings.
-        *lastVisitedDir() = directory.toLocalFile();
-        emit q->directoryEntered(directory.toLocalFile());
+    if (!directory.isEmpty()) { // Windows native dialogs occasionally emit signals with empty strings.
+        *lastVisitedDir() = directory;
+        if (directory.isLocalFile())
+            emit q->directoryEntered(directory.toLocalFile());
     }
 }
 
@@ -3752,7 +3714,7 @@ void QFileDialogComboBox::showPopup()
         idx = idx.parent();
     }
     // add "my computer"
-    list.append(QUrl::fromLocalFile(QLatin1String("")));
+    list.append(QUrl(QLatin1String("file:")));
     urlModel->addUrls(list, 0);
     idx = model()->index(model()->rowCount() - 1, 0);
 
diff --git a/src/widgets/dialogs/qfiledialog.h b/src/widgets/dialogs/qfiledialog.h
index 404e16cde1..70e498a2cd 100644
--- a/src/widgets/dialogs/qfiledialog.h
+++ b/src/widgets/dialogs/qfiledialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -287,8 +279,8 @@ private:
     Q_PRIVATE_SLOT(d_func(), void _q_updateOkButton())
     Q_PRIVATE_SLOT(d_func(), void _q_currentChanged(const QModelIndex &index))
     Q_PRIVATE_SLOT(d_func(), void _q_enterDirectory(const QModelIndex &index))
-    Q_PRIVATE_SLOT(d_func(), void _q_nativeFileSelected(const QUrl &))
-    Q_PRIVATE_SLOT(d_func(), void _q_nativeFilesSelected(const QList<QUrl> &))
+    Q_PRIVATE_SLOT(d_func(), void _q_emitUrlSelected(const QUrl &))
+    Q_PRIVATE_SLOT(d_func(), void _q_emitUrlsSelected(const QList<QUrl> &))
     Q_PRIVATE_SLOT(d_func(), void _q_nativeCurrentChanged(const QUrl &))
     Q_PRIVATE_SLOT(d_func(), void _q_nativeEnterDirectory(const QUrl&))
     Q_PRIVATE_SLOT(d_func(), void _q_goToDirectory(const QString &path))
diff --git a/src/widgets/dialogs/qfiledialog_p.h b/src/widgets/dialogs/qfiledialog_p.h
index 89c6414b71..cc2f481eb9 100644
--- a/src/widgets/dialogs/qfiledialog_p.h
+++ b/src/widgets/dialogs/qfiledialog_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -100,7 +92,7 @@ struct QFileDialogArgs
 
     QWidget *parent;
     QString caption;
-    QString directory;
+    QUrl directory;
     QString selection;
     QString filter;
     QFileDialog::FileMode mode;
@@ -123,12 +115,12 @@ public:
     void createMenuActions();
     void createWidgets();
 
-    void init(const QString &directory = QString(), const QString &nameFilter = QString(),
+    void init(const QUrl &directory = QUrl(), const QString &nameFilter = QString(),
               const QString &caption = QString());
     bool itemViewKeyboardEvent(QKeyEvent *event);
     QString getEnvironmentVariable(const QString &string);
-    static QString workingDirectory(const QString &path);
-    static QString initialSelection(const QString &path);
+    static QUrl workingDirectory(const QUrl &path);
+    static QString initialSelection(const QUrl &path);
     QStringList typedFiles() const;
     QList<QUrl> userSelectedFiles() const;
     QStringList addDefaultSuffixToFiles(const QStringList filesToFix) const;
@@ -189,7 +181,7 @@ public:
 #endif
     }
 
-    void setLastVisitedDirectory(const QString &dir);
+    void setLastVisitedDirectory(const QUrl &dir);
     void retranslateWindowTitle();
     void retranslateStrings();
     void emitFilesSelected(const QStringList &files);
@@ -210,8 +202,8 @@ public:
     void _q_updateOkButton();
     void _q_currentChanged(const QModelIndex &index);
     void _q_enterDirectory(const QModelIndex &index);
-    void _q_nativeFileSelected(const QUrl &file);
-    void _q_nativeFilesSelected(const QList<QUrl> &files);
+    void _q_emitUrlSelected(const QUrl &file);
+    void _q_emitUrlsSelected(const QList<QUrl> &files);
     void _q_nativeCurrentChanged(const QUrl &file);
     void _q_nativeEnterDirectory(const QUrl &directory);
     void _q_goToDirectory(const QString &);
@@ -374,7 +366,7 @@ inline QUrl QFileDialogPrivate::directory_sys() const
 {
     if (QPlatformFileDialogHelper *helper = platformFileDialogHelper())
         return helper->directory();
-    return QString();
+    return QUrl();
 }
 
 inline void QFileDialogPrivate::selectFile_sys(const QUrl &filename)
diff --git a/src/widgets/dialogs/qfileinfogatherer.cpp b/src/widgets/dialogs/qfileinfogatherer.cpp
index 41b0b30eeb..e7983c64c2 100644
--- a/src/widgets/dialogs/qfileinfogatherer.cpp
+++ b/src/widgets/dialogs/qfileinfogatherer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfileinfogatherer_p.h b/src/widgets/dialogs/qfileinfogatherer_p.h
index 447ee78edc..88eac5fbe8 100644
--- a/src/widgets/dialogs/qfileinfogatherer_p.h
+++ b/src/widgets/dialogs/qfileinfogatherer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfilesystemmodel.cpp b/src/widgets/dialogs/qfilesystemmodel.cpp
index c31a674cc7..988d3ad3c7 100644
--- a/src/widgets/dialogs/qfilesystemmodel.cpp
+++ b/src/widgets/dialogs/qfilesystemmodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -200,8 +192,8 @@ QT_BEGIN_NAMESPACE
 bool QFileSystemModel::remove(const QModelIndex &aindex)
 {
     const QString path = filePath(aindex);
-    QFileSystemModelPrivate * d = const_cast<QFileSystemModelPrivate*>(d_func());
 #ifndef QT_NO_FILESYSTEMWATCHER
+    QFileSystemModelPrivate * d = const_cast<QFileSystemModelPrivate*>(d_func());
     d->fileInfoGatherer.removePath(path);
 #endif
     if (QFileInfo(path).isFile())
@@ -1549,6 +1541,8 @@ void QFileSystemModel::setResolveSymlinks(bool enable)
 #ifndef QT_NO_FILESYSTEMWATCHER
     Q_D(QFileSystemModel);
     d->fileInfoGatherer.setResolveSymlinks(enable);
+#else
+    Q_UNUSED(enable)
 #endif
 }
 
@@ -1664,21 +1658,21 @@ QStringList QFileSystemModel::nameFilters() const
 */
 bool QFileSystemModel::event(QEvent *event)
 {
+#ifndef QT_NO_FILESYSTEMWATCHER
     Q_D(QFileSystemModel);
     if (event->type() == QEvent::LanguageChange) {
-#ifndef QT_NO_FILESYSTEMWATCHER
         d->root.retranslateStrings(d->fileInfoGatherer.iconProvider(), QString());
-#endif
         return true;
     }
+#endif
     return QAbstractItemModel::event(event);
 }
 
 bool QFileSystemModel::rmdir(const QModelIndex &aindex)
 {
     QString path = filePath(aindex);
-    QFileSystemModelPrivate * d = const_cast<QFileSystemModelPrivate*>(d_func());
 #ifndef QT_NO_FILESYSTEMWATCHER
+    QFileSystemModelPrivate * d = const_cast<QFileSystemModelPrivate*>(d_func());
     d->fileInfoGatherer.removePath(path);
 #endif
     return QDir().rmdir(path);
@@ -1723,6 +1717,8 @@ QFileSystemModelPrivate::QFileSystemNode* QFileSystemModelPrivate::addNode(QFile
     QFileSystemModelPrivate::QFileSystemNode *node = new QFileSystemModelPrivate::QFileSystemNode(fileName, parentNode);
 #ifndef QT_NO_FILESYSTEMWATCHER
     node->populate(info);
+#else
+    Q_UNUSED(info)
 #endif
 #if defined(Q_OS_WIN) && !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
     //The parentNode is "" so we are listing the drives
@@ -1943,6 +1939,9 @@ void QFileSystemModelPrivate::_q_fileSystemChanged(const QString &path, const QL
         forceSort = true;
         delayedSort();
     }
+#else
+    Q_UNUSED(path)
+    Q_UNUSED(updates)
 #endif // !QT_NO_FILESYSTEMWATCHER
 }
 
diff --git a/src/widgets/dialogs/qfilesystemmodel.h b/src/widgets/dialogs/qfilesystemmodel.h
index 0b52b6565b..bde699d2a0 100644
--- a/src/widgets/dialogs/qfilesystemmodel.h
+++ b/src/widgets/dialogs/qfilesystemmodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfilesystemmodel_p.h b/src/widgets/dialogs/qfilesystemmodel_p.h
index 663be3d933..867cdd9f0b 100644
--- a/src/widgets/dialogs/qfilesystemmodel_p.h
+++ b/src/widgets/dialogs/qfilesystemmodel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfontdialog.cpp b/src/widgets/dialogs/qfontdialog.cpp
index fc9f36f0c2..109b726880 100644
--- a/src/widgets/dialogs/qfontdialog.cpp
+++ b/src/widgets/dialogs/qfontdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfontdialog.h b/src/widgets/dialogs/qfontdialog.h
index 9956987cfe..455b5d3f3e 100644
--- a/src/widgets/dialogs/qfontdialog.h
+++ b/src/widgets/dialogs/qfontdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfontdialog_p.h b/src/widgets/dialogs/qfontdialog_p.h
index 18429e8ede..3af6f9f29a 100644
--- a/src/widgets/dialogs/qfontdialog_p.h
+++ b/src/widgets/dialogs/qfontdialog_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qfscompleter_p.h b/src/widgets/dialogs/qfscompleter_p.h
index e995114ee9..a5871e34f7 100644
--- a/src/widgets/dialogs/qfscompleter_p.h
+++ b/src/widgets/dialogs/qfscompleter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qinputdialog.cpp b/src/widgets/dialogs/qinputdialog.cpp
index 10d693b4a3..b52cebadfa 100644
--- a/src/widgets/dialogs/qinputdialog.cpp
+++ b/src/widgets/dialogs/qinputdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,25 +52,37 @@
 
 QT_USE_NAMESPACE
 
-static const char *signalForMember(const char *member)
+enum CandidateSignal {
+    TextValueSelectedSignal,
+    IntValueSelectedSignal,
+    DoubleValueSelectedSignal,
+
+    NumCandidateSignals
+};
+
+static const char *candidateSignal(int which)
 {
-    static const int NumCandidates = 4;
-    static const char * const candidateSignals[NumCandidates] = {
-        SIGNAL(textValueSelected(QString)),
-        SIGNAL(intValueSelected(int)),
-        SIGNAL(doubleValueSelected(double)),
-        SIGNAL(accepted())
+    switch (CandidateSignal(which)) {
+    case TextValueSelectedSignal:   return SIGNAL(textValueSelected(QString));
+    case IntValueSelectedSignal:    return SIGNAL(intValueSelected(int));
+    case DoubleValueSelectedSignal: return SIGNAL(doubleValueSelected(double));
+
+    case NumCandidateSignals:       ; // fall through
     };
+    Q_UNREACHABLE();
+    return Q_NULLPTR;
+}
 
+static const char *signalForMember(const char *member)
+{
     QByteArray normalizedMember(QMetaObject::normalizedSignature(member));
 
-    int i = 0;
-    while (i < NumCandidates - 1) { // sic
-        if (QMetaObject::checkConnectArgs(candidateSignals[i], normalizedMember))
-            break;
-        ++i;
-    }
-    return candidateSignals[i];
+    for (int i = 0; i < NumCandidateSignals; ++i)
+        if (QMetaObject::checkConnectArgs(candidateSignal(i), normalizedMember))
+            return candidateSignal(i);
+
+    // otherwise, use fit-all accepted signal:
+    return SIGNAL(accepted());
 }
 
 QT_BEGIN_NAMESPACE
diff --git a/src/widgets/dialogs/qinputdialog.h b/src/widgets/dialogs/qinputdialog.h
index c2c85835c8..4511e367d4 100644
--- a/src/widgets/dialogs/qinputdialog.h
+++ b/src/widgets/dialogs/qinputdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qmessagebox.cpp b/src/widgets/dialogs/qmessagebox.cpp
index 3350a926f0..fccddaccf5 100644
--- a/src/widgets/dialogs/qmessagebox.cpp
+++ b/src/widgets/dialogs/qmessagebox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qmessagebox.h b/src/widgets/dialogs/qmessagebox.h
index 5fae174fe1..1b47e9c575 100644
--- a/src/widgets/dialogs/qmessagebox.h
+++ b/src/widgets/dialogs/qmessagebox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qprogressdialog.cpp b/src/widgets/dialogs/qprogressdialog.cpp
index 662504fc25..01ca398a14 100644
--- a/src/widgets/dialogs/qprogressdialog.cpp
+++ b/src/widgets/dialogs/qprogressdialog.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -84,6 +76,9 @@ public:
     void init(const QString &labelText, const QString &cancelText, int min, int max);
     void layout();
     void retranslateStrings();
+    void setCancelButtonText(const QString &cancelButtonText);
+    void adoptChildWidget(QWidget *c);
+    void ensureSizeIsAtLeastSizeHint();
     void _q_disconnectOnClose();
 
     QLabel *label;
@@ -178,9 +173,8 @@ void QProgressDialogPrivate::layout()
 
 void QProgressDialogPrivate::retranslateStrings()
 {
-    Q_Q(QProgressDialog);
     if (useDefaultCancelText)
-        q->setCancelButtonText(QProgressDialog::tr("Cancel"));
+        setCancelButtonText(QProgressDialog::tr("Cancel"));
 }
 
 void QProgressDialogPrivate::_q_disconnectOnClose()
@@ -354,20 +348,14 @@ QProgressDialog::~QProgressDialog()
 void QProgressDialog::setLabel(QLabel *label)
 {
     Q_D(QProgressDialog);
+    if (label == d->label) {
+        if (label)
+            qWarning("QProgressDialog::setLabel: Attempt to set the same label again");
+        return;
+    }
     delete d->label;
     d->label = label;
-    if (label) {
-        if (label->parentWidget() == this) {
-            label->hide(); // until we resize
-        } else {
-            label->setParent(this, 0);
-        }
-    }
-    int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-    int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-    resize(w, h);
-    if (label)
-        label->show();
+    d->adoptChildWidget(label);
 }
 
 
@@ -391,9 +379,7 @@ void QProgressDialog::setLabelText(const QString &text)
     Q_D(QProgressDialog);
     if (d->label) {
         d->label->setText(text);
-        int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-        int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-        resize(w, h);
+        d->ensureSizeIsAtLeastSizeHint();
     }
 }
 
@@ -411,14 +397,14 @@ void QProgressDialog::setLabelText(const QString &text)
 void QProgressDialog::setCancelButton(QPushButton *cancelButton)
 {
     Q_D(QProgressDialog);
+    if (d->cancel == cancelButton) {
+        if (cancelButton)
+            qWarning("QProgressDialog::setCancelButton: Attempt to set the same button again");
+        return;
+    }
     delete d->cancel;
     d->cancel = cancelButton;
     if (cancelButton) {
-        if (cancelButton->parentWidget() == this) {
-            cancelButton->hide(); // until we resize
-        } else {
-            cancelButton->setParent(this, 0);
-        }
         connect(d->cancel, SIGNAL(clicked()), this, SIGNAL(canceled()));
 #ifndef QT_NO_SHORTCUT
         d->escapeShortcut = new QShortcut(Qt::Key_Escape, this, SIGNAL(canceled()));
@@ -429,11 +415,7 @@ void QProgressDialog::setCancelButton(QPushButton *cancelButton)
         d->escapeShortcut = 0;
 #endif
     }
-    int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-    int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-    resize(w, h);
-    if (cancelButton)
-        cancelButton->show();
+    d->adoptChildWidget(cancelButton);
 }
 
 /*!
@@ -448,19 +430,23 @@ void QProgressDialog::setCancelButtonText(const QString &cancelButtonText)
 {
     Q_D(QProgressDialog);
     d->useDefaultCancelText = false;
+    d->setCancelButtonText(cancelButtonText);
+}
+
+void QProgressDialogPrivate::setCancelButtonText(const QString &cancelButtonText)
+{
+    Q_Q(QProgressDialog);
 
     if (!cancelButtonText.isNull()) {
-        if (d->cancel) {
-            d->cancel->setText(cancelButtonText);
+        if (cancel) {
+            cancel->setText(cancelButtonText);
         } else {
-            setCancelButton(new QPushButton(cancelButtonText, this));
+            q->setCancelButton(new QPushButton(cancelButtonText, q));
         }
     } else {
-        setCancelButton(0);
+        q->setCancelButton(0);
     }
-    int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-    int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-    resize(w, h);
+    ensureSizeIsAtLeastSizeHint();
 }
 
 
@@ -483,11 +469,38 @@ void QProgressDialog::setBar(QProgressBar *bar)
         qWarning("QProgressDialog::setBar: Cannot set a new progress bar "
                   "while the old one is active");
 #endif
+    if (bar == d->bar) {
+        qWarning("QProgressDialog::setBar: Attempt to set the same progress bar again");
+        return;
+    }
     delete d->bar;
     d->bar = bar;
-    int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-    int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-    resize(w, h);
+    d->adoptChildWidget(bar);
+}
+
+void QProgressDialogPrivate::adoptChildWidget(QWidget *c)
+{
+    Q_Q(QProgressDialog);
+
+    if (c) {
+        if (c->parentWidget() == q)
+            c->hide(); // until after ensureSizeIsAtLeastSizeHint()
+        else
+            c->setParent(q, 0);
+    }
+    ensureSizeIsAtLeastSizeHint();
+    if (c)
+        c->show();
+}
+
+void QProgressDialogPrivate::ensureSizeIsAtLeastSizeHint()
+{
+    Q_Q(QProgressDialog);
+
+    QSize size = q->sizeHint();
+    if (q->isVisible())
+        size = size.expandedTo(q->size());
+    q->resize(size);
 }
 
 
@@ -507,7 +520,7 @@ bool QProgressDialog::wasCanceled() const
     \property QProgressDialog::maximum
     \brief the highest value represented by the progress bar
 
-    The default is 0.
+    The default is 100.
 
     \sa minimum, setRange()
 */
@@ -673,9 +686,7 @@ void QProgressDialog::setValue(int progress)
                 }
             }
             if (need_show) {
-                int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-                int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-                resize(w, h);
+                d->ensureSizeIsAtLeastSizeHint();
                 show();
                 d->shown_once = true;
             }
@@ -821,9 +832,7 @@ void QProgressDialog::showEvent(QShowEvent *e)
 {
     Q_D(QProgressDialog);
     QDialog::showEvent(e);
-    int w = qMax(isVisible() ? width() : 0, sizeHint().width());
-    int h = qMax(isVisible() ? height() : 0, sizeHint().height());
-    resize(w, h);
+    d->ensureSizeIsAtLeastSizeHint();
     d->forceTimer->stop();
 }
 
diff --git a/src/widgets/dialogs/qprogressdialog.h b/src/widgets/dialogs/qprogressdialog.h
index 20b658eb58..7547f06682 100644
--- a/src/widgets/dialogs/qprogressdialog.h
+++ b/src/widgets/dialogs/qprogressdialog.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qsidebar.cpp b/src/widgets/dialogs/qsidebar.cpp
index 3d22992e3a..f5157931cb 100644
--- a/src/widgets/dialogs/qsidebar.cpp
+++ b/src/widgets/dialogs/qsidebar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -249,7 +241,8 @@ void QUrlModel::addUrls(const QList<QUrl> &list, int row, bool move)
             continue;
         //this makes sure the url is clean
         const QString cleanUrl = QDir::cleanPath(url.toLocalFile());
-        url = QUrl::fromLocalFile(cleanUrl);
+        if (!cleanUrl.isEmpty())
+            url = QUrl::fromLocalFile(cleanUrl);
 
         for (int j = 0; move && j < rowCount(); ++j) {
             QString local = index(j, 0).data(UrlRole).toUrl().toLocalFile();
diff --git a/src/widgets/dialogs/qsidebar_p.h b/src/widgets/dialogs/qsidebar_p.h
index 319006f167..402863da85 100644
--- a/src/widgets/dialogs/qsidebar_p.h
+++ b/src/widgets/dialogs/qsidebar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qwizard.cpp b/src/widgets/dialogs/qwizard.cpp
index b294e98c30..1a12b334e6 100644
--- a/src/widgets/dialogs/qwizard.cpp
+++ b/src/widgets/dialogs/qwizard.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1475,7 +1467,7 @@ void QWizardPrivate::updateButtonTexts()
 void QWizardPrivate::updateButtonLayout()
 {
     if (buttonsHaveCustomLayout) {
-        QVarLengthArray<QWizard::WizardButton> array(buttonsCustomLayout.count());
+        QVarLengthArray<QWizard::WizardButton, QWizard::NButtons> array(buttonsCustomLayout.count());
         for (int i = 0; i < buttonsCustomLayout.count(); ++i)
             array[i] = buttonsCustomLayout.at(i);
         setButtonLayout(array.constData(), array.count());
diff --git a/src/widgets/dialogs/qwizard.h b/src/widgets/dialogs/qwizard.h
index 51b18e0e8f..25b0d5e3ee 100644
--- a/src/widgets/dialogs/qwizard.h
+++ b/src/widgets/dialogs/qwizard.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/dialogs/qwizard_win.cpp b/src/widgets/dialogs/qwizard_win.cpp
index 747115984d..6a09f9c273 100644
--- a/src/widgets/dialogs/qwizard_win.cpp
+++ b/src/widgets/dialogs/qwizard_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -172,6 +164,7 @@ static PtrGetThemePartSize pGetThemePartSize = 0;
 static PtrGetThemeColor pGetThemeColor = 0;
 
 int QVistaHelper::instanceCount = 0;
+int QVistaHelper::m_devicePixelRatio = 1;
 bool QVistaHelper::is_vista = false;
 QVistaHelper::VistaState QVistaHelper::cachedVistaState = QVistaHelper::Dirty;
 
@@ -228,11 +221,15 @@ void QVistaBackButton::paintEvent(QPaintEvent *)
     RECT clipRect;
     int xoffset = origin.x() + QWidget::mapToParent(r.topLeft()).x() - 1;
     int yoffset = origin.y() + QWidget::mapToParent(r.topLeft()).y() - 1;
+    const int dpr = devicePixelRatio();
+    const QRect rDp = QRect(r.topLeft() * dpr, r.size() * dpr);
+    const int xoffsetDp = xoffset * dpr;
+    const int yoffsetDp = yoffset * dpr;
 
-    clipRect.top = r.top() + yoffset;
-    clipRect.bottom = r.bottom() + yoffset;
-    clipRect.left = r.left() + xoffset;
-    clipRect.right = r.right()  + xoffset;
+    clipRect.top = rDp.top() + yoffsetDp;
+    clipRect.bottom = rDp.bottom() + yoffsetDp;
+    clipRect.left = rDp.left() + xoffsetDp;
+    clipRect.right = rDp.right()  + xoffsetDp;
 
     int state = WIZ_NAV_BB_NORMAL;
     if (!isEnabled())
@@ -259,6 +256,7 @@ QVistaHelper::QVistaHelper(QWizard *wizard)
     , wizard(wizard)
     , backButton_(0)
 {
+    QVistaHelper::m_devicePixelRatio = wizard->devicePixelRatio();
     is_vista = resolveSymbols();
     if (instanceCount++ == 0)
         cachedVistaState = Dirty;
@@ -281,10 +279,12 @@ QVistaHelper::~QVistaHelper()
 void QVistaHelper::updateCustomMargins(bool vistaMargins)
 {
     if (QWindow *window = wizard->windowHandle()) {
-        // Reduce top frame to zero since we paint it ourselves.
-        const QMargins customMargins = vistaMargins ?
-                       QMargins(0, -titleBarSize(), 0, 0) : QMargins();
-        const QVariant customMarginsV = qVariantFromValue(customMargins);
+        // Reduce top frame to zero since we paint it ourselves. Use
+        // device pixel to avoid rounding errors.
+        const QMargins customMarginsDp = vistaMargins
+            ? QMargins(0, -titleBarSizeDp(), 0, 0)
+            : QMargins();
+        const QVariant customMarginsV = qVariantFromValue(customMarginsDp);
         // The dynamic property takes effect when creating the platform window.
         window->setProperty("_q_windowsCustomMargins", customMarginsV);
         // If a platform window exists, change via native interface.
@@ -351,7 +351,7 @@ bool QVistaHelper::setDWMTitleBar(TitleBarChangeType type)
         if (type == NormalTitleBar)
             mar.cyTopHeight = 0;
         else
-            mar.cyTopHeight = titleBarSize() + topOffset();
+            mar.cyTopHeight = (titleBarSize() + topOffset()) * QVistaHelper::m_devicePixelRatio;
         if (const HWND wizardHandle = wizardHWND())
             if (SUCCEEDED(pDwmExtendFrameIntoClientArea(wizardHandle, &mar)))
                 value = true;
@@ -371,6 +371,8 @@ void QVistaHelper::drawTitleBar(QPainter *painter)
     if (vistaState() == VistaAero && isWindow)
         drawBlackRect(QRect(0, 0, wizard->width(),
                             titleBarSize() + topOffset()), hdc);
+    // The button is positioned in QWizardPrivate::handleAeroStyleChange(),
+    // all calculation is relative to it.
     const int btnTop = backButton_->mapToParent(QPoint()).y();
     const int btnHeight = backButton_->size().height();
     const int verticalCenter = (btnTop + btnHeight / 2) - 1;
@@ -405,14 +407,15 @@ void QVistaHelper::drawTitleBar(QPainter *painter)
 
     const QIcon windowIcon = wizard->windowIcon();
     if (!windowIcon.isNull()) {
+        const int size = QVistaHelper::iconSize();
         const int iconLeft = (wizard->layoutDirection() == Qt::LeftToRight
                               ? leftMargin()
-                              : wizard->width() - leftMargin() - iconSize());
+                              : wizard->width() - leftMargin() - size);
 
-        const QRect rect(origin.x() + iconLeft,
-                         origin.y() + verticalCenter - iconSize() / 2, iconSize(), iconSize());
-        const HICON hIcon = qt_pixmapToWinHICON(windowIcon.pixmap(iconSize()));
-        DrawIconEx(hdc, rect.left(), rect.top(), hIcon, 0, 0, 0, NULL, DI_NORMAL | DI_COMPAT);
+        const QPoint pos(origin.x() + iconLeft, origin.y() + verticalCenter - size / 2);
+        const QPoint posDp = pos * QVistaHelper::m_devicePixelRatio;
+        const HICON hIcon = qt_pixmapToWinHICON(windowIcon.pixmap(size * QVistaHelper::m_devicePixelRatio));
+        DrawIconEx(hdc, posDp.x(), posDp.y(), hIcon, 0, 0, 0, NULL, DI_NORMAL | DI_COMPAT);
         DestroyIcon(hIcon);
     }
 }
@@ -691,6 +694,8 @@ bool QVistaHelper::drawTitleText(QPainter *painter, const QString &text, const Q
 {
     bool value = false;
     if (vistaState() == VistaAero) {
+        const QRect rectDp = QRect(rect.topLeft() * QVistaHelper::m_devicePixelRatio,
+                                   rect.size() * QVistaHelper::m_devicePixelRatio);
         HWND handle = QApplicationPrivate::getHWNDForWidget(QApplication::desktop());
         HANDLE hTheme = pOpenThemeData(handle, L"WINDOW");
         if (!hTheme) return false;
@@ -702,8 +707,8 @@ bool QVistaHelper::drawTitleText(QPainter *painter, const QString &text, const Q
         dcMem = CreateCompatibleDC(hdc);
 
         dib.bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
-        dib.bmiHeader.biWidth = rect.width();
-        dib.bmiHeader.biHeight = -rect.height();
+        dib.bmiHeader.biWidth = rectDp.width();
+        dib.bmiHeader.biHeight = -rectDp.height();
         dib.bmiHeader.biPlanes = 1;
         dib.bmiHeader.biBitCount = 32;
         dib.bmiHeader.biCompression = BI_RGB;
@@ -719,13 +724,13 @@ bool QVistaHelper::drawTitleText(QPainter *painter, const QString &text, const Q
         WIZ_DTTOPTS dto;
         dto.dwSize = sizeof(WIZ_DTTOPTS);
         const UINT uFormat = WIZ_DT_SINGLELINE|WIZ_DT_CENTER|WIZ_DT_VCENTER|WIZ_DT_NOPREFIX;
-        RECT rctext ={0,0, rect.width(), rect.height()};
+        RECT rctext ={0,0, rectDp.width(), rectDp.height()};
 
         dto.dwFlags = WIZ_DTT_COMPOSITED|WIZ_DTT_GLOWSIZE;
         dto.iGlowSize = glowSize();
 
         pDrawThemeTextEx(hTheme, dcMem, 0, 0, (LPCWSTR)text.utf16(), -1, uFormat, &rctext, &dto );
-        BitBlt(hdc, rect.left(), rect.top(), rect.width(), rect.height(), dcMem, 0, 0, SRCCOPY);
+        BitBlt(hdc, rectDp.left(), rectDp.top(), rectDp.width(), rectDp.height(), dcMem, 0, 0, SRCCOPY);
         SelectObject(dcMem, (HGDIOBJ) hOldBmp);
         SelectObject(dcMem, (HGDIOBJ) hOldFont);
         DeleteObject(bmp);
@@ -743,6 +748,8 @@ bool QVistaHelper::drawBlackRect(const QRect &rect, HDC hdc)
     bool value = false;
     if (vistaState() == VistaAero) {
         // Set up a memory DC and bitmap that we'll draw into
+        const QRect rectDp = QRect(rect.topLeft() * QVistaHelper::m_devicePixelRatio,
+                                   rect.size() * QVistaHelper::m_devicePixelRatio);
         HDC dcMem;
         HBITMAP bmp;
         BITMAPINFO dib;
@@ -750,8 +757,8 @@ bool QVistaHelper::drawBlackRect(const QRect &rect, HDC hdc)
         dcMem = CreateCompatibleDC(hdc);
 
         dib.bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
-        dib.bmiHeader.biWidth = rect.width();
-        dib.bmiHeader.biHeight = -rect.height();
+        dib.bmiHeader.biWidth = rectDp.width();
+        dib.bmiHeader.biHeight = -rectDp.height();
         dib.bmiHeader.biPlanes = 1;
         dib.bmiHeader.biBitCount = 32;
         dib.bmiHeader.biCompression = BI_RGB;
@@ -759,7 +766,7 @@ bool QVistaHelper::drawBlackRect(const QRect &rect, HDC hdc)
         bmp = CreateDIBSection(hdc, &dib, DIB_RGB_COLORS, NULL, NULL, 0);
         HBITMAP hOldBmp = (HBITMAP)SelectObject(dcMem, (HGDIOBJ) bmp);
 
-        BitBlt(hdc, rect.left(), rect.top(), rect.width(), rect.height(), dcMem, 0, 0, SRCCOPY);
+        BitBlt(hdc, rectDp.left(), rectDp.top(), rectDp.width(), rectDp.height(), dcMem, 0, 0, SRCCOPY);
         SelectObject(dcMem, (HGDIOBJ) hOldBmp);
 
         DeleteObject(bmp);
@@ -785,12 +792,12 @@ static inline int getWindowBottomMargin()
 }
 #endif // _MSC_VER >= 1700
 
-int QVistaHelper::frameSize()
+int QVistaHelper::frameSizeDp()
 {
     return getWindowBottomMargin();
 }
 
-int QVistaHelper::captionSize()
+int QVistaHelper::captionSizeDp()
 {
     return GetSystemMetrics(SM_CYCAPTION);
 }
@@ -846,6 +853,16 @@ int QVistaHelper::titleOffset()
     return leftMargin() + iconOffset;
 }
 
+int QVistaHelper::iconSize()
+{
+    return QStyleHelper::dpiScaled(16); // Standard Aero
+}
+
+int QVistaHelper::glowSize()
+{
+    return QStyleHelper::dpiScaled(10);
+}
+
 int QVistaHelper::topOffset()
 {
     if (vistaState() != VistaAero)
diff --git a/src/widgets/dialogs/qwizard_win_p.h b/src/widgets/dialogs/qwizard_win_p.h
index 81514a8950..0d39f03ee3 100644
--- a/src/widgets/dialogs/qwizard_win_p.h
+++ b/src/widgets/dialogs/qwizard_win_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -102,7 +94,8 @@ public:
     QColor basicWindowFrameColor();
     enum VistaState { VistaAero, VistaBasic, Classic, Dirty };
     static VistaState vistaState();
-    static int titleBarSize() { return frameSize() + captionSize(); }
+    static int titleBarSize() { return QVistaHelper::titleBarSizeDp() / QVistaHelper::m_devicePixelRatio; }
+    static int titleBarSizeDp() { return QVistaHelper::frameSizeDp() + QVistaHelper::captionSizeDp(); }
     static int topPadding() { // padding under text
         return int(QStyleHelper::dpiScaled(
                 QSysInfo::WindowsVersion >= QSysInfo::WV_WINDOWS7 ? 4 : 6));
@@ -117,12 +110,14 @@ private:
     bool drawTitleText(QPainter *painter, const QString &text, const QRect &rect, HDC hdc);
     static bool drawBlackRect(const QRect &rect, HDC hdc);
 
-    static int frameSize();
-    static int captionSize();
+    static int frameSize() { return QVistaHelper::frameSizeDp() / QVistaHelper::m_devicePixelRatio; }
+    static int frameSizeDp();
+    static int captionSize() { return QVistaHelper::captionSizeDp() / QVistaHelper::m_devicePixelRatio; }
+    static int captionSizeDp();
 
     static int backButtonSize() { return int(QStyleHelper::dpiScaled(30)); }
-    static int iconSize() { return 16; } // Standard Aero
-    static int glowSize() { return 10; }
+    static int iconSize();
+    static int glowSize();
     int leftMargin() { return backButton_->isVisible() ? backButtonSize() + iconSpacing : 0; }
 
     int titleOffset();
@@ -152,6 +147,7 @@ private:
     int titleBarOffset;  // Extra spacing above the text
     int iconSpacing;    // Space between button and icon
     int textSpacing;    // Space between icon and text
+    static int m_devicePixelRatio;
 };
 
 
diff --git a/src/widgets/doc/qtwidgets.qdocconf b/src/widgets/doc/qtwidgets.qdocconf
index 508a257fa5..1f79d144bf 100644
--- a/src/widgets/doc/qtwidgets.qdocconf
+++ b/src/widgets/doc/qtwidgets.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtWidgets
 description             = Qt Widgets Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = widgets
@@ -34,15 +33,6 @@ headerdirs  += ..
 sourcedirs  += .. \
                ../../../examples/widgets/doc/src
 
-excludefiles += ../widgets/qmacnativewidget_mac.h \
-                ../widgets/qmaccocoaviewcontainer_mac.h \
-                ../widgets/qcocoatoolbardelegate_mac_p.h \
-                ../widgets/qcocoamenu_mac_p.h \
-                ../widgets/qmaccocoaviewcontainer_mac.mm \
-                ../widgets/qcocoatoolbardelegate_mac.mm \
-                ../widgets/qmainwindowlayout_mac.mm \
-                ../widgets/qmacnativewidget_mac.mm
-
 exampledirs += ../../../examples/widgets \
                ../../../doc/src/snippets \
                ../ \
diff --git a/src/widgets/doc/snippets/code/doc_gui_widgets_qopenglwidget.cpp b/src/widgets/doc/snippets/code/doc_gui_widgets_qopenglwidget.cpp
new file mode 100644
index 0000000000..921c3fa9f8
--- /dev/null
+++ b/src/widgets/doc/snippets/code/doc_gui_widgets_qopenglwidget.cpp
@@ -0,0 +1,199 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
+**     of its contributors may be used to endorse or promote products derived
+**     from this software without specific prior written permission.
+**
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+//! [0]
+class MyGLWidget : public QOpenGLWidget
+{
+public:
+    MyGLWidget(QWidget *parent) : QOpenGLWidget(parent) { }
+
+protected:
+    void initializeGL()
+    {
+        // Set up the rendering context, load shaders and other resources, etc.:
+        QOpenGLFunctions *f = QOpenGLContext::currentContext()->functions();
+        f->glClearColor(1.0f, 1.0f, 1.0f, 1.0f);
+        ...
+    }
+
+    void resizeGL(int w, int h)
+    {
+        // Update projection matrix and other size related settings:
+        m_projection.setToIdentity();
+        m_projection.perspective(45.0f, w / float(h), 0.01f, 100.0f);
+        ...
+    }
+
+    void paintGL()
+    {
+        // Draw the scene:
+        QOpenGLFunctions *f = QOpenGLContext::currentContext()->functions();
+        f->glClear(GL_COLOR_BUFFER_BIT);
+        ...
+    }
+
+};
+//! [0]
+
+//! [1]
+class MyGLWidget : public QOpenGLWidget, protected QOpenGLFunctions
+{
+    ...
+    void initializeGL()
+    {
+        initializeOpenGLFunctions();
+        glClearColor(...);
+        ...
+    }
+    ...
+};
+//! [1]
+
+//! [2]
+QOpenGLWidget *widget = new QOpenGLWidget(parent);
+QSurfaceFormat format;
+format.setDepthBufferSize(24);
+format.setStencilBufferSize(8);
+format.setVersion(3, 2);
+format.setProfile(QSurfaceFormat::CoreProfile);
+widget->setFormat(format); // must be called before the widget or its parent window gets shown
+//! [2]
+
+//! [3]
+    ...
+    void paintGL()
+    {
+        QOpenGLFunctions_3_2_Core *f = QOpenGLContext::currentContext()->versionFunctions<QOpenGLFunctions_3_2_Core>();
+        ...
+        f->glDrawArraysInstanced(...);
+        ...
+    }
+    ...
+//! [3]
+
+//! [4]
+class MyGLWidget : public QOpenGLWidget
+{
+    ...
+
+private:
+    QOpenGLVertexArrayObject m_vao;
+    QOpenGLBuffer m_vbo;
+    QOpenGLShaderProgram *m_program;
+    QOpenGLShader *m_shader;
+    QOpenGLTexture *m_texture;
+};
+
+MyGLWidget::MyGLWidget()
+    : m_program(0), m_shader(0), m_texture(0)
+{
+    // No OpenGL resource initialization is done here.
+}
+
+MyGLWidget::~MyGLWidget()
+{
+    // Make sure the context is current and then explicitly
+    // destroy all underlying OpenGL resources.
+    makeCurrent();
+
+    delete m_texture;
+    delete m_shader;
+    delete m_program;
+
+    m_vbo.destroy();
+    m_vao.destroy();
+
+    doneCurrent();
+}
+
+void MyGLWidget::initializeGL()
+{
+    m_vao.create();
+    if (m_vao.isCreated())
+        m_vao.bind();
+
+    m_vbo.create();
+    m_vbo.bind();
+    m_vbo.allocate(...);
+
+    m_texture = new QOpenGLTexture(QImage(...));
+
+    m_shader = new QOpenGLShader(...);
+    m_program = new QOpenGLShaderProgram(...);
+
+    ...
+}
+//! [4]
+
+//! [5]
+void MyGLWidget::initializeGL()
+{
+    // context() and QOpenGLContext::currentContext() are equivalent when called from initializeGL or paintGL.
+    connect(context(), &QOpenGLContext::aboutToBeDestroyed, this, &MyGLWidget::cleanup);
+}
+
+void MyGLWidget::cleanup()
+{
+    makeCurrent();
+    delete m_texture;
+    m_texture = 0;
+    ...
+    doneCurrent();
+}
+//! [5]
+
+//! [6]
+int main(int argc, char **argv)
+{
+    QApplication app(argc, argv);
+
+    QSurfaceFormat format;
+    format.setDepthBufferSize(24);
+    format.setStencilBufferSize(8);
+    format.setVersion(3, 2);
+    format.setProfile(QSurfaceFormat::CoreProfile);
+    QSurfaceFormat::setDefaultFormat(format);
+
+    MyWidget widget;
+    widget.show();
+
+    return app.exec();
+}
+//! [6]
diff --git a/src/widgets/doc/snippets/code/doc_src_stylesheet.qdoc b/src/widgets/doc/snippets/code/doc_src_stylesheet.qdoc
index 36d3dc6af4..702c17bc26 100644
--- a/src/widgets/doc/snippets/code/doc_src_stylesheet.qdoc
+++ b/src/widgets/doc/snippets/code/doc_src_stylesheet.qdoc
@@ -1864,3 +1864,8 @@ QTabBar::close-button:hover {
 }
 
 //! [159]
+
+//! [160]
+* { lineedit-password-mask-delay: 1000 }
+//! [160]
+
diff --git a/src/widgets/doc/src/model-view-programming.qdoc b/src/widgets/doc/src/model-view-programming.qdoc
index 3a8fd54bcf..8978efa1e3 100644
--- a/src/widgets/doc/src/model-view-programming.qdoc
+++ b/src/widgets/doc/src/model-view-programming.qdoc
@@ -214,7 +214,7 @@
     classes, such as QListView, QTableView, and QTreeView with
     QStandardItemModel.
 
-    \section1 Using models and views
+    \section1 Using Models and Views
 
     The following sections explain how to use the model/view pattern
     in Qt. Each section includes an example and is followed by a
@@ -282,7 +282,7 @@
     of items. This subject is covered in more detail in the section about
     \l{Handling Selections in Item Views}.
 
-    \section1 Model classes
+    \section1 Model Classes
 
     Before examining how selections are handled, you may find it
     useful to examine the concepts used in the model/view framework.
@@ -518,7 +518,7 @@
     section, we demonstrate this by creating a convenient ready-to-use
     model for holding lists of strings.
 
-    \section1 View classes
+    \section1 View Classes
 
     \section2 Concepts
 
@@ -678,7 +678,7 @@
     each view; for example, a contiguous selection in a table view can be
     represented as a fragmented set of highlighted items in a tree view.
 
-    \section1 Delegate classes
+    \section1 Delegate Classes
 
     \section2 Concepts
 
@@ -863,7 +863,7 @@
     be less integrated into applications, and will be less usable than
     those that emit hints to support common editing actions.
 
-    \section1 Handling selections in item views
+    \section1 Handling Selections in Item Views
 
     \section2 Concepts
 
@@ -1139,7 +1139,7 @@
     determine whether any given item is the parent of another level of
     items.
 
-    \section1 Creating new models
+    \section1 Creating New Models
 
     The separation of functionality between the model/view components allows
     models to be created that can take advantage of existing views. This
@@ -1405,7 +1405,7 @@
     virtual functions that must be implemented to enable various features in
     different types of models.
 
-    \section1 Item view convenience classes
+    \section1 Item View Convenience Classes
 
     The item-based widgets have names which reflect their uses:
     \c QListWidget provides a list of items, \c QTreeWidget displays a
@@ -1832,7 +1832,7 @@
 
     \sa {itemviews/puzzle}{Item Views Puzzle Example}
 
-    \section1 Proxy models
+    \section1 Proxy Models
 
     In the model/view framework, items of data supplied by a single model can be shared
     by any number of views, and each of these can possibly represent the same information
@@ -1917,7 +1917,7 @@
     \l{QSortFilterProxyModel::lessThan()}{lessThan()} function to perform custom
     comparisons.
 
-    \section1 Model subclassing reference
+    \section1 Model Subclassing Reference
 
     Model subclasses need to provide implementations of many of the virtual functions
     defined in the QAbstractItemModel base class. The number of these functions that need
@@ -2299,7 +2299,7 @@
     false and does nothing.
 
     \keyword Model/View Classes
-    \section1 The model/view classes
+    \section1 The Model/View Classes
 
     These classes use the model/view design pattern in which the
     underlying data (in the model) is kept separate from the way the
@@ -2307,7 +2307,7 @@
 
     \annotatedlist model-view
 
-    \section1 Related examples
+    \section1 Related Examples
 
     \list
     \li \l{itemviews/dirview}{Dir View}
diff --git a/src/widgets/doc/src/widgets-and-layouts/styles.qdoc b/src/widgets/doc/src/widgets-and-layouts/styles.qdoc
index f8b3d80b67..042a0c9f14 100644
--- a/src/widgets/doc/src/widgets-and-layouts/styles.qdoc
+++ b/src/widgets/doc/src/widgets-and-layouts/styles.qdoc
@@ -84,7 +84,7 @@
 
     \annotatedlist appearance
 
-    \section1 The QStyle implementation
+    \section1 The QStyle Implementation
 
     The API of QStyle contains functions that draw the widgets, static
     helper functions to do common and difficult tasks (e.g.,
diff --git a/src/widgets/doc/src/widgets-and-layouts/stylesheet.qdoc b/src/widgets/doc/src/widgets-and-layouts/stylesheet.qdoc
index e8c1be4c46..9f22ee1540 100644
--- a/src/widgets/doc/src/widgets-and-layouts/stylesheet.qdoc
+++ b/src/widgets/doc/src/widgets-and-layouts/stylesheet.qdoc
@@ -512,7 +512,7 @@
     In contrast, setting a font and propagate using QWidget::setFont() and
     QWidget::setPalette() propagates to child widgets.
 
-    \section1 Widgets inside C++ namespaces
+    \section1 Widgets Inside C++ Namespaces
 
     The Type Selector can be used to style widgets of a particular type. For
     example,
@@ -528,7 +528,7 @@
 
     \snippet code/doc_src_stylesheet.cpp 27
 
-    \section1 Setting QObject properties
+    \section1 Setting QObject Properties
 
     From 4.3 and above, any designable Q_PROPERTY
     can be set using the qproperty-<property name> syntax.
@@ -862,6 +862,9 @@
            \l{#lineedit-password-character-prop}{lineedit-password-character}
            property.
 
+           The password mask delay can be changed using the
+           \l{#lineedit-password-mask-delay-prop}{lineedit-password-mask-delay}
+
            See \l{Qt Style Sheets Examples#Customizing QLineEdit}{Customizing QLineEdit}
            for an example.
 
@@ -2009,6 +2012,23 @@
            \snippet code/doc_src_stylesheet.qdoc 61
 
     \row
+        \li \b{\c lineedit-password-mask-delay*} \target lineedit-password-mask-delay-prop
+        \li \l{#Number}{Number}
+        \li The QLineEdit password mask delay in milliseconds before
+           \l{#lineedit-password-character-prop}{lineedit-password-character} is applied to visible character.
+
+           If this property is not specified, it defaults to the
+           value specified by the current style for the
+           \l{QStyle::}{SH_LineEdit_PasswordMaskDelay} style hint.
+
+           \b{This property was added in Qt 5.4.}
+
+           Example:
+
+           \snippet code/doc_src_stylesheet.qdoc 160
+
+
+    \row
         \li \b{\c margin} \target margin-prop
         \li \l {Box Lengths}
         \li The widget's margins. Equivalent to specifying \c
@@ -2881,6 +2901,9 @@
            \li \c ex: the ex width of the font (i.e., the height of 'x')
            \endlist
 
+           However, Qt is limited to font sizes in \c pt and \c px and any other
+           size must be in \c px, \c em or \c ex.
+
     \row
         \li \b{Number} \target Number
         \li A decimal integer or a real number
@@ -3526,7 +3549,7 @@
     [Hint: The \l{The Style Sheet Syntax#Conflict Resolution}{Conflict Resolution} section above explains
     what happens in cases like this.]
 
-    \section1 Customizing specific widgets
+    \section1 Customizing Specific Widgets
 
     This section provides examples to customize specific widgets using Style Sheets.
 
@@ -3907,7 +3930,7 @@
     \sa {Style Sheet Example}, {Supported HTML Subset}, QStyle
 
 
-    \section1 Common mistakes
+    \section1 Common Mistakes
 
     This section lists some common mistakes when using stylesheets.
 
diff --git a/src/widgets/doc/src/widgets-tutorial.qdoc b/src/widgets/doc/src/widgets-tutorial.qdoc
index d4cf063231..3e65d3e22d 100644
--- a/src/widgets/doc/src/widgets-tutorial.qdoc
+++ b/src/widgets/doc/src/widgets-tutorial.qdoc
@@ -36,9 +36,9 @@
 
     Widgets are the basic building blocks for graphical user interface
     (GUI) applications built with Qt. Each GUI component (e.g.
-    buttons, labels, text editor) is a \l{QWidget}{widget} that is
+    buttons, labels, text editors) is a \l{QWidget}{widget} that is
     placed somewhere within a user interface window, or is displayed
-    as an independent window. Each type of widge is provided by a
+    as an independent window. Each type of widget is provided by a
     subclass of QWidget, which is itself a subclass of QObject.
 
     QWidget is not an abstract class. It can be used as a container
@@ -49,12 +49,12 @@
     As with \l{QObject}s, \l{QWidget}s can be created with parent
     objects to indicate ownership, ensuring that objects are deleted
     when they are no longer used. With widgets, these parent-child
-    relationships have an additional meaning: Each child widget is
+    relationships have an additional meaning: each child widget is
     displayed within the screen area occupied by its parent widget.
     This means that when you delete a window widget, all the child
     widgets it contains are also deleted.
 
-    \section1 Writing a main Function
+    \section1 Writing a Main Function
 
     Many of the GUI examples provided with Qt follow the pattern of
     having a \c{main.cpp} file, which contains the standard code to
@@ -72,7 +72,7 @@
     function returns. Finally, \c{main()} returns the value returned
     by QApplication::exec().
 
-    \section1 Simple widget examples
+    \section1 Simple Widget Examples
 
     Each of theses simple widget examples is written entirely within
     the \c main() function.
@@ -87,7 +87,7 @@
     \li \l {tutorials/widgets/nestedlayouts} {Nested layouts}
     \endlist
 
-    \section1 Real world widget examples
+    \section1 Real World Widget Examples
 
     In these \l{Qt Widgets Examples} {more advanced examples}, the code
     that creates the widgets and layouts is stored in other files. For
diff --git a/src/widgets/effects/qgraphicseffect.cpp b/src/widgets/effects/qgraphicseffect.cpp
index 390c4e96e5..c69b0ee2eb 100644
--- a/src/widgets/effects/qgraphicseffect.cpp
+++ b/src/widgets/effects/qgraphicseffect.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/effects/qgraphicseffect.h b/src/widgets/effects/qgraphicseffect.h
index 8acb832eee..a7db19431d 100644
--- a/src/widgets/effects/qgraphicseffect.h
+++ b/src/widgets/effects/qgraphicseffect.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/effects/qgraphicseffect_p.h b/src/widgets/effects/qgraphicseffect_p.h
index 7cdb071196..4b21e105de 100644
--- a/src/widgets/effects/qgraphicseffect_p.h
+++ b/src/widgets/effects/qgraphicseffect_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/effects/qpixmapfilter.cpp b/src/widgets/effects/qpixmapfilter.cpp
index c7ae4e2996..6f618b8914 100644
--- a/src/widgets/effects/qpixmapfilter.cpp
+++ b/src/widgets/effects/qpixmapfilter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/effects/qpixmapfilter_p.h b/src/widgets/effects/qpixmapfilter_p.h
index 624079c3ba..22925f66cf 100644
--- a/src/widgets/effects/qpixmapfilter_p.h
+++ b/src/widgets/effects/qpixmapfilter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraph_p.h b/src/widgets/graphicsview/qgraph_p.h
index 2368c6fbec..f101d9efb0 100644
--- a/src/widgets/graphicsview/qgraph_p.h
+++ b/src/widgets/graphicsview/qgraph_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsanchorlayout.cpp b/src/widgets/graphicsview/qgraphicsanchorlayout.cpp
index 47cb42195f..a7e0e71f15 100644
--- a/src/widgets/graphicsview/qgraphicsanchorlayout.cpp
+++ b/src/widgets/graphicsview/qgraphicsanchorlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -100,7 +92,7 @@
     If the spacing is negative, the items will overlap to some extent.
 
 
-    \section1 Known issues
+    \section1 Known Issues
     There are some features that QGraphicsAnchorLayout currently does not support.
     This might change in the future, so avoid using these features if you want to
     avoid any future regressions in behaviour:
diff --git a/src/widgets/graphicsview/qgraphicsanchorlayout.h b/src/widgets/graphicsview/qgraphicsanchorlayout.h
index c924a0386a..13494dd81a 100644
--- a/src/widgets/graphicsview/qgraphicsanchorlayout.h
+++ b/src/widgets/graphicsview/qgraphicsanchorlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsanchorlayout_p.cpp b/src/widgets/graphicsview/qgraphicsanchorlayout_p.cpp
index 27a75655a0..013d05016e 100644
--- a/src/widgets/graphicsview/qgraphicsanchorlayout_p.cpp
+++ b/src/widgets/graphicsview/qgraphicsanchorlayout_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsanchorlayout_p.h b/src/widgets/graphicsview/qgraphicsanchorlayout_p.h
index 37defccc96..457a5a2769 100644
--- a/src/widgets/graphicsview/qgraphicsanchorlayout_p.h
+++ b/src/widgets/graphicsview/qgraphicsanchorlayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsgridlayout.cpp b/src/widgets/graphicsview/qgraphicsgridlayout.cpp
index 0ecb4af6bd..9720bbf9ba 100644
--- a/src/widgets/graphicsview/qgraphicsgridlayout.cpp
+++ b/src/widgets/graphicsview/qgraphicsgridlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsgridlayout.h b/src/widgets/graphicsview/qgraphicsgridlayout.h
index 6d0ef5ea10..26b6daa96f 100644
--- a/src/widgets/graphicsview/qgraphicsgridlayout.h
+++ b/src/widgets/graphicsview/qgraphicsgridlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsgridlayoutengine.cpp b/src/widgets/graphicsview/qgraphicsgridlayoutengine.cpp
index 605411bd6d..3d9c5d6de5 100644
--- a/src/widgets/graphicsview/qgraphicsgridlayoutengine.cpp
+++ b/src/widgets/graphicsview/qgraphicsgridlayoutengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsgridlayoutengine_p.h b/src/widgets/graphicsview/qgraphicsgridlayoutengine_p.h
index 1c12f15744..4d6bdfce0a 100644
--- a/src/widgets/graphicsview/qgraphicsgridlayoutengine_p.h
+++ b/src/widgets/graphicsview/qgraphicsgridlayoutengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsitem.cpp b/src/widgets/graphicsview/qgraphicsitem.cpp
index e327a8737a..114c45dc0f 100644
--- a/src/widgets/graphicsview/qgraphicsitem.cpp
+++ b/src/widgets/graphicsview/qgraphicsitem.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -332,6 +324,8 @@
     this flag is disabled; children can draw anywhere. This behavior is
     enforced by QGraphicsView::drawItems() or
     QGraphicsScene::drawItems(). This flag was introduced in Qt 4.3.
+    \note This flag is similar to ItemContainsChildrenInShape but in addition
+    enforces the containment by clipping the children.
 
     \value ItemIgnoresTransformations The item ignores inherited
     transformations (i.e., its position is still anchored to its parent, but
@@ -423,6 +417,19 @@
     ItemStopsClickFocusPropagation, but also suppresses focus-out. This flag
     allows you to completely take over focus handling.
     This flag was introduced in Qt 4.7. \endomit
+
+    \value ItemContainsChildrenInShape This flag indicates that all of the
+    item's direct or indirect children only draw within the item's shape.
+    Unlike ItemClipsChildrenToShape, this restriction is not enforced. Set
+    ItemContainsChildrenInShape when you manually assure that drawing
+    is bound to the item's shape and want to avoid the cost associated with
+    enforcing the clip. Setting this flag enables more efficient drawing and
+    collision detection. The flag is disabled by default.
+    \note If both this flag and ItemClipsChildrenToShape are set, the clip
+    will be enforced. This is equivalent to just setting
+    ItemClipsChildrenToShape.
+    .
+    This flag was introduced in Qt 5.4.
 */
 
 /*!
@@ -836,6 +843,10 @@ void QGraphicsItemPrivate::updateAncestorFlag(QGraphicsItem::GraphicsItemFlag ch
             flag = AncestorIgnoresTransformations;
             enabled = flags & QGraphicsItem::ItemIgnoresTransformations;
             break;
+        case QGraphicsItem::ItemContainsChildrenInShape:
+            flag = AncestorContainsChildren;
+            enabled = flags & QGraphicsItem::ItemContainsChildrenInShape;
+            break;
         default:
             return;
         }
@@ -895,6 +906,8 @@ void QGraphicsItemPrivate::updateAncestorFlags()
             flags |= AncestorClipsChildren;
         if (pd->flags & QGraphicsItem::ItemIgnoresTransformations)
             flags |= AncestorIgnoresTransformations;
+        if (pd->flags & QGraphicsItem::ItemContainsChildrenInShape)
+            flags |= AncestorContainsChildren;
     }
 
     if (ancestorFlags == flags)
@@ -1831,6 +1844,11 @@ void QGraphicsItem::setFlags(GraphicsItemFlags flags)
         d_ptr->markParentDirty(true);
     }
 
+    if ((flags & ItemContainsChildrenInShape) != (oldFlags & ItemContainsChildrenInShape)) {
+        // Item children containtment changes. Propagate the ancestor flag to all children.
+        d_ptr->updateAncestorFlag(ItemContainsChildrenInShape);
+    }
+
     if ((flags & ItemIgnoresTransformations) != (oldFlags & ItemIgnoresTransformations)) {
         // Item children clipping changes. Propagate the ancestor flag to
         // all children.
@@ -2322,7 +2340,8 @@ void QGraphicsItemPrivate::setVisibleHelper(bool newVisible, bool explicitly,
     }
 
     // Update children with explicitly = false.
-    const bool updateChildren = update && !((flags & QGraphicsItem::ItemClipsChildrenToShape)
+    const bool updateChildren = update && !((flags & QGraphicsItem::ItemClipsChildrenToShape
+                                             || flags & QGraphicsItem::ItemContainsChildrenInShape)
                                             && !(flags & QGraphicsItem::ItemHasNoContents));
     foreach (QGraphicsItem *child, children) {
         if (!newVisible || !child->d_ptr->explicitlyHidden)
@@ -2835,7 +2854,9 @@ QRectF QGraphicsItemPrivate::effectiveBoundingRect(QGraphicsItem *topMostEffectI
 #ifndef QT_NO_GRAPHICSEFFECT
     Q_Q(const QGraphicsItem);
     QRectF brect = effectiveBoundingRect(q_ptr->boundingRect());
-    if (ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren || topMostEffectItem == q)
+    if (ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+        || ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren
+        || topMostEffectItem == q)
         return brect;
 
     const QGraphicsItem *effectParent = parent;
@@ -2847,6 +2868,7 @@ QRectF QGraphicsItemPrivate::effectiveBoundingRect(QGraphicsItem *topMostEffectI
             brect = effectParent->mapRectToItem(q, effectRectInParentSpace);
         }
         if (effectParent->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+            || effectParent->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren
             || topMostEffectItem == effectParent) {
             return brect;
         }
@@ -7442,7 +7464,8 @@ QVariant QGraphicsItem::extension(const QVariant &variant) const
 */
 void QGraphicsItem::addToIndex()
 {
-    if (d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren) {
+    if (d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+        || d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren) {
         // ### add to child index only if applicable
         return;
     }
@@ -7459,7 +7482,8 @@ void QGraphicsItem::addToIndex()
 */
 void QGraphicsItem::removeFromIndex()
 {
-    if (d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren) {
+    if (d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+        || d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren) {
         // ### remove from child index only if applicable
         return;
     }
@@ -11451,6 +11475,9 @@ QDebug operator<<(QDebug debug, QGraphicsItem::GraphicsItemFlag flag)
     case QGraphicsItem::ItemStopsFocusHandling:
         str = "ItemStopsFocusHandling";
         break;
+    case QGraphicsItem::ItemContainsChildrenInShape:
+        str = "ItemContainsChildrenInShape";
+        break;
     }
     debug << str;
     return debug;
diff --git a/src/widgets/graphicsview/qgraphicsitem.h b/src/widgets/graphicsview/qgraphicsitem.h
index 4283deb5b8..3a238390d7 100644
--- a/src/widgets/graphicsview/qgraphicsitem.h
+++ b/src/widgets/graphicsview/qgraphicsitem.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -105,7 +97,8 @@ public:
         ItemIsFocusScope = 0x8000, // internal
         ItemSendsScenePositionChanges = 0x10000,
         ItemStopsClickFocusPropagation = 0x20000,
-        ItemStopsFocusHandling = 0x40000
+        ItemStopsFocusHandling = 0x40000,
+        ItemContainsChildrenInShape = 0x80000
         // NB! Don't forget to increase the d_ptr->flags bit field by 1 when adding a new flag.
     };
     Q_DECLARE_FLAGS(GraphicsItemFlags, GraphicsItemFlag)
@@ -1029,14 +1022,16 @@ private:
 
 template <class T> inline T qgraphicsitem_cast(QGraphicsItem *item)
 {
-    return int(static_cast<T>(0)->Type) == int(QGraphicsItem::Type)
-        || (item && int(static_cast<T>(0)->Type) == item->type()) ? static_cast<T>(item) : 0;
+    typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type Item;
+    return int(Item::Type) == int(QGraphicsItem::Type)
+        || (item && int(Item::Type) == item->type()) ? static_cast<T>(item) : 0;
 }
 
 template <class T> inline T qgraphicsitem_cast(const QGraphicsItem *item)
 {
-    return int(static_cast<T>(0)->Type) == int(QGraphicsItem::Type)
-        || (item && int(static_cast<T>(0)->Type) == item->type()) ? static_cast<T>(item) : 0;
+    typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type Item;
+    return int(Item::Type) == int(QGraphicsItem::Type)
+        || (item && int(Item::Type) == item->type()) ? static_cast<T>(item) : 0;
 }
 
 #ifndef QT_NO_DEBUG_STREAM
diff --git a/src/widgets/graphicsview/qgraphicsitem_p.h b/src/widgets/graphicsview/qgraphicsitem_p.h
index 3968d89a13..f1986a5072 100644
--- a/src/widgets/graphicsview/qgraphicsitem_p.h
+++ b/src/widgets/graphicsview/qgraphicsitem_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -172,7 +164,8 @@ public:
         AncestorHandlesChildEvents = 0x1,
         AncestorClipsChildren = 0x2,
         AncestorIgnoresTransformations = 0x4,
-        AncestorFiltersChildEvents = 0x8
+        AncestorFiltersChildEvents = 0x8,
+        AncestorContainsChildren = 0x10
     };
 
     inline QGraphicsItemPrivate()
@@ -213,7 +206,6 @@ public:
         needSortChildren(0),
         allChildrenDirty(0),
         fullUpdatePending(0),
-        dirtyChildrenBoundingRect(1),
         flags(0),
         paintedViewBoundingRectsNeedRepaint(0),
         dirtySceneTransform(1),
@@ -239,6 +231,7 @@ public:
         mayHaveChildWithGraphicsEffect(0),
         isDeclarativeItem(0),
         sendParentChangeNotification(0),
+        dirtyChildrenBoundingRect(1),
         globalStackingOrder(-1),
         q_ptr(0)
     {
@@ -317,7 +310,7 @@ public:
     virtual void resolvePalette(uint inheritedMask)
     {
         for (int i = 0; i < children.size(); ++i)
-            children.at(i)->d_ptr->resolveFont(inheritedMask);
+            children.at(i)->d_ptr->resolvePalette(inheritedMask);
     }
 
     virtual bool isProxyWidget() const;
@@ -544,7 +537,7 @@ public:
     quint32 handlesChildEvents : 1;
     quint32 itemDiscovered : 1;
     quint32 hasCursor : 1;
-    quint32 ancestorFlags : 4;
+    quint32 ancestorFlags : 5;
     quint32 cacheMode : 2;
     quint32 hasBoundingRegionGranularity : 1;
     quint32 isWidget : 1;
@@ -555,10 +548,9 @@ public:
     quint32 needSortChildren : 1;
     quint32 allChildrenDirty : 1;
     quint32 fullUpdatePending : 1;
-    quint32 dirtyChildrenBoundingRect : 1;
 
     // Packed 32 bits
-    quint32 flags : 19;
+    quint32 flags : 20;
     quint32 paintedViewBoundingRectsNeedRepaint : 1;
     quint32 dirtySceneTransform : 1;
     quint32 geometryChanged : 1;
@@ -571,9 +563,9 @@ public:
     quint32 filtersDescendantEvents : 1;
     quint32 sceneTransformTranslateOnly : 1;
     quint32 notifyBoundingRectChanged : 1;
-    quint32 notifyInvalidated : 1;
 
     // New 32 bits
+    quint32 notifyInvalidated : 1;
     quint32 mouseSetsFocus : 1;
     quint32 explicitActivate : 1;
     quint32 wantsActive : 1;
@@ -585,7 +577,8 @@ public:
     quint32 mayHaveChildWithGraphicsEffect : 1;
     quint32 isDeclarativeItem : 1;
     quint32 sendParentChangeNotification : 1;
-    quint32 padding : 21;
+    quint32 dirtyChildrenBoundingRect : 1;
+    quint32 padding : 19;
 
     // Optional stacking order
     int globalStackingOrder;
diff --git a/src/widgets/graphicsview/qgraphicsitemanimation.cpp b/src/widgets/graphicsview/qgraphicsitemanimation.cpp
index ff98c147fe..ece5ecb2c3 100644
--- a/src/widgets/graphicsview/qgraphicsitemanimation.cpp
+++ b/src/widgets/graphicsview/qgraphicsitemanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsitemanimation.h b/src/widgets/graphicsview/qgraphicsitemanimation.h
index 1e8f27ef53..46cd24486c 100644
--- a/src/widgets/graphicsview/qgraphicsitemanimation.h
+++ b/src/widgets/graphicsview/qgraphicsitemanimation.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayout.cpp b/src/widgets/graphicsview/qgraphicslayout.cpp
index f2ff1fa562..6dac490e3f 100644
--- a/src/widgets/graphicsview/qgraphicslayout.cpp
+++ b/src/widgets/graphicsview/qgraphicslayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayout.h b/src/widgets/graphicsview/qgraphicslayout.h
index 719ac0dd4d..83004e36f9 100644
--- a/src/widgets/graphicsview/qgraphicslayout.h
+++ b/src/widgets/graphicsview/qgraphicslayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayout_p.cpp b/src/widgets/graphicsview/qgraphicslayout_p.cpp
index d856416564..d99af72f0b 100644
--- a/src/widgets/graphicsview/qgraphicslayout_p.cpp
+++ b/src/widgets/graphicsview/qgraphicslayout_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayout_p.h b/src/widgets/graphicsview/qgraphicslayout_p.h
index 4257e5bc94..a45cb31b28 100644
--- a/src/widgets/graphicsview/qgraphicslayout_p.h
+++ b/src/widgets/graphicsview/qgraphicslayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayoutitem.cpp b/src/widgets/graphicsview/qgraphicslayoutitem.cpp
index 2eaac6a57e..219366b1ec 100644
--- a/src/widgets/graphicsview/qgraphicslayoutitem.cpp
+++ b/src/widgets/graphicsview/qgraphicslayoutitem.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayoutitem.h b/src/widgets/graphicsview/qgraphicslayoutitem.h
index e1dfadcca0..cf085c0def 100644
--- a/src/widgets/graphicsview/qgraphicslayoutitem.h
+++ b/src/widgets/graphicsview/qgraphicslayoutitem.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayoutitem_p.h b/src/widgets/graphicsview/qgraphicslayoutitem_p.h
index 62f93f9091..1a7656df4c 100644
--- a/src/widgets/graphicsview/qgraphicslayoutitem_p.h
+++ b/src/widgets/graphicsview/qgraphicslayoutitem_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayoutstyleinfo.cpp b/src/widgets/graphicsview/qgraphicslayoutstyleinfo.cpp
index d60fd6059e..2208029aac 100644
--- a/src/widgets/graphicsview/qgraphicslayoutstyleinfo.cpp
+++ b/src/widgets/graphicsview/qgraphicslayoutstyleinfo.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslayoutstyleinfo_p.h b/src/widgets/graphicsview/qgraphicslayoutstyleinfo_p.h
index 8770e96136..9e216c8200 100644
--- a/src/widgets/graphicsview/qgraphicslayoutstyleinfo_p.h
+++ b/src/widgets/graphicsview/qgraphicslayoutstyleinfo_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -104,4 +96,4 @@ private:
 
 QT_END_NAMESPACE
 
-#endif // QGRAPHICSLAYOUTSTYLEINFO_P_H
\ No newline at end of file
+#endif // QGRAPHICSLAYOUTSTYLEINFO_P_H
diff --git a/src/widgets/graphicsview/qgraphicslinearlayout.cpp b/src/widgets/graphicsview/qgraphicslinearlayout.cpp
index 294905b986..cad049c30a 100644
--- a/src/widgets/graphicsview/qgraphicslinearlayout.cpp
+++ b/src/widgets/graphicsview/qgraphicslinearlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicslinearlayout.h b/src/widgets/graphicsview/qgraphicslinearlayout.h
index 04e27515f1..28c6fb4813 100644
--- a/src/widgets/graphicsview/qgraphicslinearlayout.h
+++ b/src/widgets/graphicsview/qgraphicslinearlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsproxywidget.cpp b/src/widgets/graphicsview/qgraphicsproxywidget.cpp
index f5db85b698..68bc2ae1fa 100644
--- a/src/widgets/graphicsview/qgraphicsproxywidget.cpp
+++ b/src/widgets/graphicsview/qgraphicsproxywidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsproxywidget.h b/src/widgets/graphicsview/qgraphicsproxywidget.h
index 8180cb9966..765caea0b1 100644
--- a/src/widgets/graphicsview/qgraphicsproxywidget.h
+++ b/src/widgets/graphicsview/qgraphicsproxywidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsproxywidget_p.h b/src/widgets/graphicsview/qgraphicsproxywidget_p.h
index 2eb4efaf18..37d7de2f5e 100644
--- a/src/widgets/graphicsview/qgraphicsproxywidget_p.h
+++ b/src/widgets/graphicsview/qgraphicsproxywidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsscene.cpp b/src/widgets/graphicsview/qgraphicsscene.cpp
index bccdb1fbaa..ae3eb1eee7 100644
--- a/src/widgets/graphicsview/qgraphicsscene.cpp
+++ b/src/widgets/graphicsview/qgraphicsscene.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -299,6 +291,7 @@ QGraphicsScenePrivate::QGraphicsScenePrivate()
       painterStateProtection(true),
       sortCacheEnabled(false),
       allItemsIgnoreTouchEvents(true),
+      minimumRenderSize(0.0),
       selectionChanging(0),
       rectAdjust(2),
       focusItem(0),
@@ -1607,9 +1600,9 @@ void QGraphicsScenePrivate::updatePalette(const QPalette &palette)
     // whose parent is not a widget.
     foreach (QGraphicsItem *item, q->items()) {
         if (!item->parentItem()) {
-            // Resolvefont for an item is a noop operation, but
+            // ResolvePalette for an item is a noop operation, but
             // every item can be a widget, or can have a widget
-            // childre.
+            // children.
             item->d_ptr->resolvePalette(palette.resolve());
         }
     }
@@ -4716,19 +4709,40 @@ void QGraphicsScenePrivate::drawSubtreeRecursive(QGraphicsItem *item, QPainter *
         wasDirtyParentSceneTransform = true;
     }
 
-    const bool itemClipsChildrenToShape = (item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape);
+    const bool itemClipsChildrenToShape = (item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape
+                                           || item->d_ptr->flags & QGraphicsItem::ItemContainsChildrenInShape);
     bool drawItem = itemHasContents && !itemIsFullyTransparent;
-    if (drawItem) {
+    if (drawItem || minimumRenderSize > 0.0) {
         const QRectF brect = adjustedItemEffectiveBoundingRect(item);
         ENSURE_TRANSFORM_PTR
-        QRect viewBoundingRect = translateOnlyTransform ? brect.translated(transformPtr->dx(), transformPtr->dy()).toAlignedRect()
-                                                        : transformPtr->mapRect(brect).toAlignedRect();
-        viewBoundingRect.adjust(-int(rectAdjust), -int(rectAdjust), rectAdjust, rectAdjust);
-        if (widget)
-            item->d_ptr->paintedViewBoundingRects.insert(widget, viewBoundingRect);
-        drawItem = exposedRegion ? exposedRegion->intersects(viewBoundingRect)
-                                 : !viewBoundingRect.normalized().isEmpty();
-        if (!drawItem) {
+        QRectF preciseViewBoundingRect = translateOnlyTransform ? brect.translated(transformPtr->dx(), transformPtr->dy())
+                                                                : transformPtr->mapRect(brect);
+
+        bool itemIsTooSmallToRender = false;
+        if (minimumRenderSize > 0.0
+            && (preciseViewBoundingRect.width() < minimumRenderSize
+                || preciseViewBoundingRect.height() < minimumRenderSize)) {
+           itemIsTooSmallToRender = true;
+           drawItem = false;
+        }
+
+        bool itemIsOutsideVisibleRect = false;
+        if (drawItem) {
+            QRect viewBoundingRect = preciseViewBoundingRect.toAlignedRect();
+            viewBoundingRect.adjust(-int(rectAdjust), -int(rectAdjust), rectAdjust, rectAdjust);
+            if (widget)
+                item->d_ptr->paintedViewBoundingRects.insert(widget, viewBoundingRect);
+            drawItem = exposedRegion ? exposedRegion->intersects(viewBoundingRect)
+                                     : !viewBoundingRect.normalized().isEmpty();
+            itemIsOutsideVisibleRect = !drawItem;
+        }
+
+        if (itemIsTooSmallToRender || itemIsOutsideVisibleRect) {
+            // We cannot simply use !drawItem here. If we did it is possible
+            // to enter the outter if statement with drawItem == false and minimumRenderSize > 0
+            // and finally end up inside this inner if, even though none of the above two
+            // conditions are met. In that case we should not return from this function
+            // but call draw() instead.
             if (!itemHasChildren)
                 return;
             if (itemClipsChildrenToShape) {
@@ -5200,7 +5214,8 @@ void QGraphicsScenePrivate::processDirtyItemsRecursive(QGraphicsItem *item, bool
 
     // Process children.
     if (itemHasChildren && item->d_ptr->dirtyChildren) {
-        const bool itemClipsChildrenToShape = item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape;
+        const bool itemClipsChildrenToShape = item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape
+                                              || item->d_ptr->flags & QGraphicsItem::ItemContainsChildrenInShape;
         // Items with no content are threated as 'dummy' items which means they are never drawn and
         // 'processed', so the painted view bounding rect is never up-to-date. This means that whenever
         // such an item changes geometry, its children have to take care of the update regardless
@@ -5729,6 +5744,49 @@ bool QGraphicsScene::sendEvent(QGraphicsItem *item, QEvent *event)
     return d->sendEvent(item, event);
 }
 
+/*!
+    \property QGraphicsScene::minimumRenderSize
+    \since 5.4
+    \brief the minimal view-transformed size an item must have to be drawn
+
+    When the scene is rendered, any item whose width or height, transformed
+    to the target view, is smaller that minimumRenderSize(), will not be
+    rendered. If an item is not rendered and it clips its children items
+    they will also not be rendered. Set this value to speed up rendering
+    of scenes with many objects rendered on a zoomed out view.
+
+    The default value is 0. If unset, or if set to 0 or a negative value,
+    all items will always be rendered.
+
+    For example, setting this property can be especially useful if a scene
+    is rendered by multiple views, one of which serves as an overview which
+    always displays all items. In scenes with many items, such a view will
+    use a high scaling factor so that all items can be shown. Due to the
+    scaling, smaller items will only make an insignificant contribution to
+    the final rendered scene. To avoid drawing these items and reduce the
+    time necessary to render the scene, you can call setMinimumRenderSize()
+    with a non-negative value.
+
+    \note Items that are not drawn as a result of being too small, are still
+    returned by methods such as items() and itemAt(), and participate in
+    collision detection and interactions. It is recommended that you set
+    minimumRenderSize() to a value less than or equal to 1 in order to
+    avoid large unrendered items that are interactive.
+
+    \sa QStyleOptionGraphicsItem::levelOfDetailFromTransform()
+*/
+qreal QGraphicsScene::minimumRenderSize() const
+{
+    Q_D(const QGraphicsScene);
+    return d->minimumRenderSize;
+}
+void QGraphicsScene::setMinimumRenderSize(qreal minSize)
+{
+    Q_D(QGraphicsScene);
+    d->minimumRenderSize = minSize;
+    update();
+}
+
 void QGraphicsScenePrivate::addView(QGraphicsView *view)
 {
     views << view;
diff --git a/src/widgets/graphicsview/qgraphicsscene.h b/src/widgets/graphicsview/qgraphicsscene.h
index cde0eda125..24255c3b30 100644
--- a/src/widgets/graphicsview/qgraphicsscene.h
+++ b/src/widgets/graphicsview/qgraphicsscene.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -107,6 +99,7 @@ class Q_WIDGETS_EXPORT QGraphicsScene : public QObject
     Q_PROPERTY(QFont font READ font WRITE setFont)
     Q_PROPERTY(bool sortCacheEnabled READ isSortCacheEnabled WRITE setSortCacheEnabled)
     Q_PROPERTY(bool stickyFocus READ stickyFocus WRITE setStickyFocus)
+    Q_PROPERTY(qreal minimumRenderSize READ minimumRenderSize WRITE setMinimumRenderSize)
 
 public:
     enum ItemIndexMethod {
@@ -249,6 +242,9 @@ public:
 
     bool sendEvent(QGraphicsItem *item, QEvent *event);
 
+    qreal minimumRenderSize() const;
+    void setMinimumRenderSize(qreal minSize);
+
 public Q_SLOTS:
     void update(const QRectF &rect = QRectF());
     void invalidate(const QRectF &rect = QRectF(), SceneLayers layers = AllLayers);
diff --git a/src/widgets/graphicsview/qgraphicsscene_bsp.cpp b/src/widgets/graphicsview/qgraphicsscene_bsp.cpp
index 55c52d1c6a..739acecf5b 100644
--- a/src/widgets/graphicsview/qgraphicsscene_bsp.cpp
+++ b/src/widgets/graphicsview/qgraphicsscene_bsp.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsscene_bsp_p.h b/src/widgets/graphicsview/qgraphicsscene_bsp_p.h
index 88e34b7dea..e87d1e8a52 100644
--- a/src/widgets/graphicsview/qgraphicsscene_bsp_p.h
+++ b/src/widgets/graphicsview/qgraphicsscene_bsp_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsscene_p.h b/src/widgets/graphicsview/qgraphicsscene_p.h
index 9e5bcec488..95e30efa23 100644
--- a/src/widgets/graphicsview/qgraphicsscene_p.h
+++ b/src/widgets/graphicsview/qgraphicsscene_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -117,6 +109,8 @@ public:
     quint32 allItemsIgnoreTouchEvents : 1;
     quint32 padding : 15;
 
+    qreal minimumRenderSize;
+
     QRectF growingItemsBoundingRect;
 
     void _q_emitUpdated();
diff --git a/src/widgets/graphicsview/qgraphicsscenebsptreeindex.cpp b/src/widgets/graphicsview/qgraphicsscenebsptreeindex.cpp
index 7598163f2d..330c3b9411 100644
--- a/src/widgets/graphicsview/qgraphicsscenebsptreeindex.cpp
+++ b/src/widgets/graphicsview/qgraphicsscenebsptreeindex.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -169,7 +161,8 @@ void QGraphicsSceneBspTreeIndexPrivate::_q_updateIndex()
                 untransformableItems << item;
                 continue;
             }
-            if (item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren)
+            if (item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+                || item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren)
                 continue;
 
             bsp.insertItem(item, item->d_ptr->sceneEffectiveBoundingRect());
@@ -351,7 +344,8 @@ void QGraphicsSceneBspTreeIndexPrivate::removeItem(QGraphicsItem *item, bool rec
             // Avoid virtual function calls from the destructor.
             purgePending = true;
             removedItems << item;
-        } else if (!(item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren)) {
+        } else if (!(item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+                     || item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren)) {
             bsp.removeItem(item, item->d_ptr->sceneEffectiveBoundingRect());
         }
     } else {
@@ -510,7 +504,8 @@ void QGraphicsSceneBspTreeIndex::prepareBoundingRectChange(const QGraphicsItem *
         return;
 
     if (item->d_ptr->index == -1 || item->d_ptr->itemIsUntransformable()
-        || (item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren)) {
+        || (item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+            || item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren)) {
         return; // Item is not in BSP tree; nothing to do.
     }
 
@@ -641,8 +636,10 @@ void QGraphicsSceneBspTreeIndex::itemChange(const QGraphicsItem *item, QGraphics
         QGraphicsItem::GraphicsItemFlags newFlags = *static_cast<const QGraphicsItem::GraphicsItemFlags *>(value);
         bool ignoredTransform = item->d_ptr->flags & QGraphicsItem::ItemIgnoresTransformations;
         bool willIgnoreTransform = newFlags & QGraphicsItem::ItemIgnoresTransformations;
-        bool clipsChildren = item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape;
-        bool willClipChildren = newFlags & QGraphicsItem::ItemClipsChildrenToShape;
+        bool clipsChildren = item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape
+                             || item->d_ptr->flags & QGraphicsItem::ItemContainsChildrenInShape;
+        bool willClipChildren = newFlags & QGraphicsItem::ItemClipsChildrenToShape
+                                || newFlags & QGraphicsItem::ItemContainsChildrenInShape;
         if ((ignoredTransform != willIgnoreTransform) || (clipsChildren != willClipChildren)) {
             QGraphicsItem *thatItem = const_cast<QGraphicsItem *>(item);
             // Remove item and its descendants from the index and append
@@ -663,10 +660,13 @@ void QGraphicsSceneBspTreeIndex::itemChange(const QGraphicsItem *item, QGraphics
         bool ignoredTransform = item->d_ptr->itemIsUntransformable();
         bool willIgnoreTransform = (item->d_ptr->flags & QGraphicsItem::ItemIgnoresTransformations)
                                    || (newParent && newParent->d_ptr->itemIsUntransformable());
-        bool ancestorClippedChildren = item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren;
+        bool ancestorClippedChildren = item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+                                       || item->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren;
         bool ancestorWillClipChildren = newParent
-                            && ((newParent->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape)
-                                || (newParent->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren));
+                            && ((newParent->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape
+                                 || newParent->d_ptr->flags & QGraphicsItem::ItemContainsChildrenInShape)
+                                || (newParent->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorClipsChildren
+                                    || newParent->d_ptr->ancestorFlags & QGraphicsItemPrivate::AncestorContainsChildren));
         if ((ignoredTransform != willIgnoreTransform) || (ancestorClippedChildren != ancestorWillClipChildren)) {
             QGraphicsItem *thatItem = const_cast<QGraphicsItem *>(item);
             // Remove item and its descendants from the index and append
diff --git a/src/widgets/graphicsview/qgraphicsscenebsptreeindex_p.h b/src/widgets/graphicsview/qgraphicsscenebsptreeindex_p.h
index 4f552ce762..02a3b44ff2 100644
--- a/src/widgets/graphicsview/qgraphicsscenebsptreeindex_p.h
+++ b/src/widgets/graphicsview/qgraphicsscenebsptreeindex_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicssceneevent.cpp b/src/widgets/graphicsview/qgraphicssceneevent.cpp
index 631aa7bf19..42a1c47f1e 100644
--- a/src/widgets/graphicsview/qgraphicssceneevent.cpp
+++ b/src/widgets/graphicsview/qgraphicssceneevent.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -348,7 +340,7 @@ class QGraphicsSceneMouseEventPrivate : public QGraphicsSceneEventPrivate
 public:
     inline QGraphicsSceneMouseEventPrivate()
         : button(Qt::NoButton),
-          buttons(0), modifiers(0)
+          buttons(0), modifiers(0), source(Qt::MouseEventNotSynthesized), flags(0)
     { }
 
     QPointF pos;
@@ -363,6 +355,8 @@ public:
     Qt::MouseButton button;
     Qt::MouseButtons buttons;
     Qt::KeyboardModifiers modifiers;
+    Qt::MouseEventSource source;
+    Qt::MouseEventFlags flags;
 };
 
 /*!
@@ -626,6 +620,60 @@ Qt::KeyboardModifiers QGraphicsSceneMouseEvent::modifiers() const
 }
 
 /*!
+  \since 5.4
+
+  Returns information about the mouse event source.
+
+  The mouse event source can be used to distinguish between genuine
+  and artificial mouse events. The latter are events that are
+  synthesized from touch events by the operating system or Qt itself.
+
+  \sa Qt::MouseEventSource
+  \sa QMouseEvent::source()
+ */
+Qt::MouseEventSource QGraphicsSceneMouseEvent::source() const
+{
+    Q_D(const QGraphicsSceneMouseEvent);
+    return d->source;
+}
+
+/*!
+    \since 5.4
+    \internal
+ */
+void QGraphicsSceneMouseEvent::setSource(Qt::MouseEventSource source)
+{
+    Q_D(QGraphicsSceneMouseEvent);
+    d->source = source;
+}
+
+/*!
+     \since 5.4
+
+     Returns the mouse event flags.
+
+     The mouse event flags provide additional information about a mouse event.
+
+     \sa Qt::MouseEventFlag
+     \sa QMouseEvent::flags()
+ */
+Qt::MouseEventFlags QGraphicsSceneMouseEvent::flags() const
+{
+    Q_D(const QGraphicsSceneMouseEvent);
+    return d->flags;
+}
+
+/*!
+    \since 5.4
+    \internal
+ */
+void QGraphicsSceneMouseEvent::setFlags(Qt::MouseEventFlags flags)
+{
+    Q_D(QGraphicsSceneMouseEvent);
+    d->flags = flags;
+}
+
+/*!
     \internal
 */
 void QGraphicsSceneMouseEvent::setModifiers(Qt::KeyboardModifiers modifiers)
diff --git a/src/widgets/graphicsview/qgraphicssceneevent.h b/src/widgets/graphicsview/qgraphicssceneevent.h
index e744d08edf..81ee46e56c 100644
--- a/src/widgets/graphicsview/qgraphicssceneevent.h
+++ b/src/widgets/graphicsview/qgraphicssceneevent.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -121,6 +113,12 @@ public:
     Qt::KeyboardModifiers modifiers() const;
     void setModifiers(Qt::KeyboardModifiers modifiers);
 
+    Qt::MouseEventSource source() const;
+    void setSource(Qt::MouseEventSource source);
+
+    Qt::MouseEventFlags flags() const;
+    void setFlags(Qt::MouseEventFlags);
+
 private:
     Q_DECLARE_PRIVATE(QGraphicsSceneMouseEvent)
     Q_DISABLE_COPY(QGraphicsSceneMouseEvent)
diff --git a/src/widgets/graphicsview/qgraphicssceneindex.cpp b/src/widgets/graphicsview/qgraphicssceneindex.cpp
index 40f63937f4..fa1615dfc4 100644
--- a/src/widgets/graphicsview/qgraphicssceneindex.cpp
+++ b/src/widgets/graphicsview/qgraphicssceneindex.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -278,7 +270,8 @@ void QGraphicsSceneIndexPrivate::recursive_items_helper(QGraphicsItem *item, QRe
         Q_ASSERT(!item->d_ptr->dirtySceneTransform);
     }
 
-    const bool itemClipsChildrenToShape = (item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape);
+    const bool itemClipsChildrenToShape = (item->d_ptr->flags & QGraphicsItem::ItemClipsChildrenToShape
+                                           || item->d_ptr->flags & QGraphicsItem::ItemContainsChildrenInShape);
     bool processItem = !itemIsFullyTransparent;
     if (processItem) {
         processItem = intersect(item, exposeRect, mode, viewTransform, intersectData);
diff --git a/src/widgets/graphicsview/qgraphicssceneindex_p.h b/src/widgets/graphicsview/qgraphicssceneindex_p.h
index 215fefe9b7..1674e5f86f 100644
--- a/src/widgets/graphicsview/qgraphicssceneindex_p.h
+++ b/src/widgets/graphicsview/qgraphicssceneindex_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsscenelinearindex.cpp b/src/widgets/graphicsview/qgraphicsscenelinearindex.cpp
index f4f5f8b30b..b5f0948dd3 100644
--- a/src/widgets/graphicsview/qgraphicsscenelinearindex.cpp
+++ b/src/widgets/graphicsview/qgraphicsscenelinearindex.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsscenelinearindex_p.h b/src/widgets/graphicsview/qgraphicsscenelinearindex_p.h
index 7debcfb501..57d4ce9702 100644
--- a/src/widgets/graphicsview/qgraphicsscenelinearindex_p.h
+++ b/src/widgets/graphicsview/qgraphicsscenelinearindex_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,7 +62,7 @@ class Q_AUTOTEST_EXPORT QGraphicsSceneLinearIndex : public QGraphicsSceneIndex
     Q_OBJECT
 
 public:
-    QGraphicsSceneLinearIndex(QGraphicsScene *scene = 0) : QGraphicsSceneIndex(scene)
+    QGraphicsSceneLinearIndex(QGraphicsScene *scene = 0) : QGraphicsSceneIndex(scene), m_numSortedElements(0)
     { }
 
     QList<QGraphicsItem *> items(Qt::SortOrder order = Qt::DescendingOrder) const
@@ -85,16 +77,35 @@ public:
 
 protected :
     virtual void clear()
-    { m_items.clear(); }
+    {
+        m_items.clear();
+        m_numSortedElements = 0;
+    }
 
     virtual void addItem(QGraphicsItem *item)
     { m_items << item; }
 
     virtual void removeItem(QGraphicsItem *item)
-    { m_items.removeOne(item); }
+    {
+        // Sort m_items if needed
+        if (m_numSortedElements < m_items.size())
+        {
+            std::sort(m_items.begin() + m_numSortedElements, m_items.end() );
+            std::inplace_merge(m_items.begin(), m_items.begin() + m_numSortedElements, m_items.end());
+            m_numSortedElements = m_items.size();
+        }
+
+        QList<QGraphicsItem*>::iterator element = std::lower_bound(m_items.begin(), m_items.end(), item);
+        if (element != m_items.end() && *element == item)
+        {
+            m_items.erase(element);
+            --m_numSortedElements;
+        }
+    }
 
 private:
     QList<QGraphicsItem*> m_items;
+    int m_numSortedElements;
 };
 
 #endif // QT_NO_GRAPHICSVIEW
diff --git a/src/widgets/graphicsview/qgraphicstransform.cpp b/src/widgets/graphicsview/qgraphicstransform.cpp
index 1dd8837b2f..dd58ac83c6 100644
--- a/src/widgets/graphicsview/qgraphicstransform.cpp
+++ b/src/widgets/graphicsview/qgraphicstransform.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtDeclarative module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicstransform.h b/src/widgets/graphicsview/qgraphicstransform.h
index 6f274201be..db8b574515 100644
--- a/src/widgets/graphicsview/qgraphicstransform.h
+++ b/src/widgets/graphicsview/qgraphicstransform.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicstransform_p.h b/src/widgets/graphicsview/qgraphicstransform_p.h
index 211443a77c..3ad3b31513 100644
--- a/src/widgets/graphicsview/qgraphicstransform_p.h
+++ b/src/widgets/graphicsview/qgraphicstransform_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsview.cpp b/src/widgets/graphicsview/qgraphicsview.cpp
index 5bcf52b6a3..88d5e52204 100644
--- a/src/widgets/graphicsview/qgraphicsview.cpp
+++ b/src/widgets/graphicsview/qgraphicsview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -655,6 +647,8 @@ void QGraphicsViewPrivate::mouseMoveEventHandler(QMouseEvent *event)
     mouseEvent.setButtons(event->buttons());
     mouseEvent.setButton(event->button());
     mouseEvent.setModifiers(event->modifiers());
+    mouseEvent.setSource(event->source());
+    mouseEvent.setFlags(event->flags());
     lastMouseMoveScenePoint = mouseEvent.scenePos();
     lastMouseMoveScreenPoint = mouseEvent.screenPos();
     mouseEvent.setAccepted(false);
@@ -2760,7 +2754,7 @@ void QGraphicsView::setupViewport(QWidget *widget)
         return;
     }
 
-    const bool isGLWidget = widget->inherits("QGLWidget");
+    const bool isGLWidget = widget->inherits("QGLWidget") || widget->inherits("QOpenGLWidget");
 
     d->accelerateScrolling = !(isGLWidget);
 
@@ -3217,6 +3211,8 @@ void QGraphicsView::mouseDoubleClickEvent(QMouseEvent *event)
     mouseEvent.setAccepted(false);
     mouseEvent.setButton(event->button());
     mouseEvent.setModifiers(event->modifiers());
+    mouseEvent.setSource(event->source());
+    mouseEvent.setFlags(event->flags());
     if (event->spontaneous())
         qt_sendSpontaneousEvent(d->scene, &mouseEvent);
     else
@@ -3265,6 +3261,8 @@ void QGraphicsView::mousePressEvent(QMouseEvent *event)
             mouseEvent.setButtons(event->buttons());
             mouseEvent.setButton(event->button());
             mouseEvent.setModifiers(event->modifiers());
+            mouseEvent.setSource(event->source());
+            mouseEvent.setFlags(event->flags());
             mouseEvent.setAccepted(false);
             if (event->spontaneous())
                 qt_sendSpontaneousEvent(d->scene, &mouseEvent);
@@ -3392,6 +3390,8 @@ void QGraphicsView::mouseReleaseEvent(QMouseEvent *event)
     mouseEvent.setButtons(event->buttons());
     mouseEvent.setButton(event->button());
     mouseEvent.setModifiers(event->modifiers());
+    mouseEvent.setSource(event->source());
+    mouseEvent.setFlags(event->flags());
     mouseEvent.setAccepted(false);
     if (event->spontaneous())
         qt_sendSpontaneousEvent(d->scene, &mouseEvent);
diff --git a/src/widgets/graphicsview/qgraphicsview.h b/src/widgets/graphicsview/qgraphicsview.h
index 670c3251b5..b681551fe7 100644
--- a/src/widgets/graphicsview/qgraphicsview.h
+++ b/src/widgets/graphicsview/qgraphicsview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicsview_p.h b/src/widgets/graphicsview/qgraphicsview_p.h
index 5725fd9c19..ca87b932e2 100644
--- a/src/widgets/graphicsview/qgraphicsview_p.h
+++ b/src/widgets/graphicsview/qgraphicsview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicswidget.cpp b/src/widgets/graphicsview/qgraphicswidget.cpp
index 40d32ea1d5..4a9c3b098e 100644
--- a/src/widgets/graphicsview/qgraphicswidget.cpp
+++ b/src/widgets/graphicsview/qgraphicswidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicswidget.h b/src/widgets/graphicsview/qgraphicswidget.h
index 8881fec1d6..d0f3ac9af6 100644
--- a/src/widgets/graphicsview/qgraphicswidget.h
+++ b/src/widgets/graphicsview/qgraphicswidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicswidget_p.cpp b/src/widgets/graphicsview/qgraphicswidget_p.cpp
index e1dd23f177..fa369463f7 100644
--- a/src/widgets/graphicsview/qgraphicswidget_p.cpp
+++ b/src/widgets/graphicsview/qgraphicswidget_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qgraphicswidget_p.h b/src/widgets/graphicsview/qgraphicswidget_p.h
index 759d8561b0..2cb6565f87 100644
--- a/src/widgets/graphicsview/qgraphicswidget_p.h
+++ b/src/widgets/graphicsview/qgraphicswidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qsimplex_p.cpp b/src/widgets/graphicsview/qsimplex_p.cpp
index cf023dc8f1..0fd59ba986 100644
--- a/src/widgets/graphicsview/qsimplex_p.cpp
+++ b/src/widgets/graphicsview/qsimplex_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/graphicsview/qsimplex_p.h b/src/widgets/graphicsview/qsimplex_p.h
index 8cb295e7ef..699850cb58 100644
--- a/src/widgets/graphicsview/qsimplex_p.h
+++ b/src/widgets/graphicsview/qsimplex_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qabstractitemdelegate.cpp b/src/widgets/itemviews/qabstractitemdelegate.cpp
index 16a6e2ca38..4dffa6efe7 100644
--- a/src/widgets/itemviews/qabstractitemdelegate.cpp
+++ b/src/widgets/itemviews/qabstractitemdelegate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qabstractitemdelegate.h b/src/widgets/itemviews/qabstractitemdelegate.h
index 13e4f06687..9bce527bdc 100644
--- a/src/widgets/itemviews/qabstractitemdelegate.h
+++ b/src/widgets/itemviews/qabstractitemdelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qabstractitemview.cpp b/src/widgets/itemviews/qabstractitemview.cpp
index a77448cbc4..3f7a028fa4 100644
--- a/src/widgets/itemviews/qabstractitemview.cpp
+++ b/src/widgets/itemviews/qabstractitemview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1949,7 +1941,7 @@ void QAbstractItemView::dragMoveEvent(QDragMoveEvent *event)
             case AboveItem:
                 if (d->isIndexDropEnabled(index.parent())) {
                     d->dropIndicatorRect = QRect(rect.left(), rect.top(), rect.width(), 0);
-                    event->accept();
+                    event->acceptProposedAction();
                 } else {
                     d->dropIndicatorRect = QRect();
                 }
@@ -1957,7 +1949,7 @@ void QAbstractItemView::dragMoveEvent(QDragMoveEvent *event)
             case BelowItem:
                 if (d->isIndexDropEnabled(index.parent())) {
                     d->dropIndicatorRect = QRect(rect.left(), rect.bottom(), rect.width(), 0);
-                    event->accept();
+                    event->acceptProposedAction();
                 } else {
                     d->dropIndicatorRect = QRect();
                 }
@@ -1965,7 +1957,7 @@ void QAbstractItemView::dragMoveEvent(QDragMoveEvent *event)
             case OnItem:
                 if (d->isIndexDropEnabled(index)) {
                     d->dropIndicatorRect = rect;
-                    event->accept();
+                    event->acceptProposedAction();
                 } else {
                     d->dropIndicatorRect = QRect();
                 }
@@ -1973,7 +1965,7 @@ void QAbstractItemView::dragMoveEvent(QDragMoveEvent *event)
             case OnViewport:
                 d->dropIndicatorRect = QRect();
                 if (d->isIndexDropEnabled(rootIndex())) {
-                    event->accept(); // allow dropping in empty areas
+                    event->acceptProposedAction(); // allow dropping in empty areas
                 }
                 break;
             }
@@ -1981,7 +1973,7 @@ void QAbstractItemView::dragMoveEvent(QDragMoveEvent *event)
             d->dropIndicatorRect = QRect();
             d->dropIndicatorPosition = OnViewport;
             if (d->isIndexDropEnabled(rootIndex())) {
-                event->accept(); // allow dropping in empty areas
+                event->acceptProposedAction(); // allow dropping in empty areas
             }
         }
         d->viewport->update();
@@ -2050,11 +2042,14 @@ void QAbstractItemView::dropEvent(QDropEvent *event)
     int col = -1;
     int row = -1;
     if (d->dropOn(event, &row, &col, &index)) {
-        if (d->model->dropMimeData(event->mimeData(),
-            dragDropMode() == InternalMove ? Qt::MoveAction : event->dropAction(), row, col, index)) {
-                if (dragDropMode() == InternalMove)
-                    event->setDropAction(Qt::MoveAction);
+        const Qt::DropAction action = dragDropMode() == InternalMove ? Qt::MoveAction : event->dropAction();
+        if (d->model->dropMimeData(event->mimeData(), action, row, col, index)) {
+            if (action != event->dropAction()) {
+                event->setDropAction(action);
                 event->accept();
+            } else {
+                event->acceptProposedAction();
+            }
         }
     }
     stopAutoScroll();
@@ -3126,6 +3121,8 @@ void QAbstractItemView::setIndexWidget(const QModelIndex &index, QWidget *widget
     Q_D(QAbstractItemView);
     if (!d->isIndexValid(index))
         return;
+    if (indexWidget(index) == widget)
+        return;
     if (QWidget *oldWidget = indexWidget(index)) {
         d->persistent.remove(oldWidget);
         d->removeEditor(oldWidget);
diff --git a/src/widgets/itemviews/qabstractitemview.h b/src/widgets/itemviews/qabstractitemview.h
index 4f9cd7b1c6..f7cdcc8451 100644
--- a/src/widgets/itemviews/qabstractitemview.h
+++ b/src/widgets/itemviews/qabstractitemview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qabstractitemview_p.h b/src/widgets/itemviews/qabstractitemview_p.h
index 1b5987de16..047533b22c 100644
--- a/src/widgets/itemviews/qabstractitemview_p.h
+++ b/src/widgets/itemviews/qabstractitemview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qbsptree.cpp b/src/widgets/itemviews/qbsptree.cpp
index a4da0b73fd..00c130a70c 100644
--- a/src/widgets/itemviews/qbsptree.cpp
+++ b/src/widgets/itemviews/qbsptree.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qbsptree_p.h b/src/widgets/itemviews/qbsptree_p.h
index 3210efbd3d..66cbd17826 100644
--- a/src/widgets/itemviews/qbsptree_p.h
+++ b/src/widgets/itemviews/qbsptree_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qcolumnview.cpp b/src/widgets/itemviews/qcolumnview.cpp
index 32a3dddca1..1c60d50922 100644
--- a/src/widgets/itemviews/qcolumnview.cpp
+++ b/src/widgets/itemviews/qcolumnview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qcolumnview.h b/src/widgets/itemviews/qcolumnview.h
index a13433bb2d..85b38840cf 100644
--- a/src/widgets/itemviews/qcolumnview.h
+++ b/src/widgets/itemviews/qcolumnview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qcolumnview_p.h b/src/widgets/itemviews/qcolumnview_p.h
index 3d54c9098a..f96170679f 100644
--- a/src/widgets/itemviews/qcolumnview_p.h
+++ b/src/widgets/itemviews/qcolumnview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qcolumnviewgrip.cpp b/src/widgets/itemviews/qcolumnviewgrip.cpp
index 614916dc61..75d82d4f35 100644
--- a/src/widgets/itemviews/qcolumnviewgrip.cpp
+++ b/src/widgets/itemviews/qcolumnviewgrip.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qcolumnviewgrip_p.h b/src/widgets/itemviews/qcolumnviewgrip_p.h
index c508c58c5b..e5e936a30d 100644
--- a/src/widgets/itemviews/qcolumnviewgrip_p.h
+++ b/src/widgets/itemviews/qcolumnviewgrip_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qdatawidgetmapper.cpp b/src/widgets/itemviews/qdatawidgetmapper.cpp
index 76d01dbb2b..43ed0b2ae5 100644
--- a/src/widgets/itemviews/qdatawidgetmapper.cpp
+++ b/src/widgets/itemviews/qdatawidgetmapper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,6 +42,8 @@
 #include "private/qobject_p.h"
 #include "private/qabstractitemmodel_p.h"
 
+#include <iterator>
+
 QT_BEGIN_NAMESPACE
 
 class QDataWidgetMapperPrivate: public QObjectPrivate
@@ -92,8 +86,8 @@ public:
     inline void flipEventFilters(QAbstractItemDelegate *oldDelegate,
                                  QAbstractItemDelegate *newDelegate)
     {
-        for (int i = 0; i < widgetMap.count(); ++i) {
-            QWidget *w = widgetMap.at(i).widget;
+        for (QList<WidgetMapper>::const_iterator it = widgetMap.cbegin(), end = widgetMap.cend(); it != end; ++it) {
+            QWidget *w = it->widget;
             if (!w)
                 continue;
             w->removeEventFilter(oldDelegate);
@@ -132,9 +126,9 @@ public:
 
 int QDataWidgetMapperPrivate::findWidget(QWidget *w) const
 {
-    for (int i = 0; i < widgetMap.count(); ++i) {
-        if (widgetMap.at(i).widget == w)
-            return i;
+    for (QList<WidgetMapper>::const_iterator it = widgetMap.cbegin(), end = widgetMap.cend(); it != end; ++it) {
+        if (it->widget == w)
+            return int(std::distance(widgetMap.cbegin(), it));
     }
     return -1;
 }
@@ -171,8 +165,8 @@ void QDataWidgetMapperPrivate::populate(WidgetMapper &m)
 
 void QDataWidgetMapperPrivate::populate()
 {
-    for (int i = 0; i < widgetMap.count(); ++i)
-        populate(widgetMap[i]);
+    for (QList<WidgetMapper>::iterator it = widgetMap.begin(), end = widgetMap.end(); it != end; ++it)
+        populate(*it);
 }
 
 static bool qContainsIndex(const QModelIndex &idx, const QModelIndex &topLeft,
@@ -187,10 +181,9 @@ void QDataWidgetMapperPrivate::_q_dataChanged(const QModelIndex &topLeft, const
     if (topLeft.parent() != rootIndex)
         return; // not in our hierarchy
 
-    for (int i = 0; i < widgetMap.count(); ++i) {
-        WidgetMapper &m = widgetMap[i];
-        if (qContainsIndex(m.currentIndex, topLeft, bottomRight))
-            populate(m);
+    for (QList<WidgetMapper>::iterator it = widgetMap.begin(), end = widgetMap.end(); it != end; ++it) {
+        if (qContainsIndex(it->currentIndex, topLeft, bottomRight))
+            populate(*it);
     }
 }
 
@@ -582,9 +575,9 @@ QWidget *QDataWidgetMapper::mappedWidgetAt(int section) const
 {
     Q_D(const QDataWidgetMapper);
 
-    for (int i = 0; i < d->widgetMap.count(); ++i) {
-        if (d->widgetMap.at(i).section == section)
-            return d->widgetMap.at(i).widget;
+    for (QList<QDataWidgetMapperPrivate::WidgetMapper>::const_iterator it = d->widgetMap.cbegin(), end = d->widgetMap.cend(); it != end; ++it) {
+        if (it->section == section)
+            return it->widget;
     }
 
     return 0;
@@ -621,9 +614,8 @@ bool QDataWidgetMapper::submit()
 {
     Q_D(QDataWidgetMapper);
 
-    for (int i = 0; i < d->widgetMap.count(); ++i) {
-        const QDataWidgetMapperPrivate::WidgetMapper &m = d->widgetMap.at(i);
-        if (!d->commit(m))
+    for (QList<QDataWidgetMapperPrivate::WidgetMapper>::const_iterator it = d->widgetMap.cbegin(), end = d->widgetMap.cend(); it != end; ++it) {
+        if (!d->commit(*it))
             return false;
     }
 
@@ -762,10 +754,11 @@ void QDataWidgetMapper::clearMapping()
 {
     Q_D(QDataWidgetMapper);
 
-    while (!d->widgetMap.isEmpty()) {
-        QWidget *w = d->widgetMap.takeLast().widget;
-        if (w)
-            w->removeEventFilter(d->delegate);
+    QList<QDataWidgetMapperPrivate::WidgetMapper> copy;
+    d->widgetMap.swap(copy); // a C++98 move
+    for (std::reverse_iterator<QList<QDataWidgetMapperPrivate::WidgetMapper>::const_iterator> it(copy.cend()), end(copy.cbegin()); it != end; ++it) {
+        if (it->widget)
+            it->widget->removeEventFilter(d->delegate);
     }
 }
 
diff --git a/src/widgets/itemviews/qdatawidgetmapper.h b/src/widgets/itemviews/qdatawidgetmapper.h
index b8742196b2..2afbd0ae87 100644
--- a/src/widgets/itemviews/qdatawidgetmapper.h
+++ b/src/widgets/itemviews/qdatawidgetmapper.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qdirmodel.cpp b/src/widgets/itemviews/qdirmodel.cpp
index 1e51f4e073..6bb8cd29c5 100644
--- a/src/widgets/itemviews/qdirmodel.cpp
+++ b/src/widgets/itemviews/qdirmodel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qdirmodel.h b/src/widgets/itemviews/qdirmodel.h
index c0214395ef..249d7711c0 100644
--- a/src/widgets/itemviews/qdirmodel.h
+++ b/src/widgets/itemviews/qdirmodel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qfileiconprovider.cpp b/src/widgets/itemviews/qfileiconprovider.cpp
index b12ab736f4..14948111e5 100644
--- a/src/widgets/itemviews/qfileiconprovider.cpp
+++ b/src/widgets/itemviews/qfileiconprovider.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -368,8 +360,10 @@ QString QFileIconProvider::type(const QFileInfo &info) const
     if (info.isRoot())
         return QApplication::translate("QFileDialog", "Drive");
     if (info.isFile()) {
-        if (!info.suffix().isEmpty())
-            return info.suffix() + QLatin1Char(' ') + QApplication::translate("QFileDialog", "File");
+        if (!info.suffix().isEmpty()) {
+            //: %1 is a file name suffix, for example txt
+            return QApplication::translate("QFileDialog", "%1 File").arg(info.suffix());
+        }
         return QApplication::translate("QFileDialog", "File");
     }
 
diff --git a/src/widgets/itemviews/qfileiconprovider.h b/src/widgets/itemviews/qfileiconprovider.h
index 6f7e28395b..4b489d072f 100644
--- a/src/widgets/itemviews/qfileiconprovider.h
+++ b/src/widgets/itemviews/qfileiconprovider.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qfileiconprovider_p.h b/src/widgets/itemviews/qfileiconprovider_p.h
index 1c50a7e772..6a1fc9a0be 100644
--- a/src/widgets/itemviews/qfileiconprovider_p.h
+++ b/src/widgets/itemviews/qfileiconprovider_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qheaderview.cpp b/src/widgets/itemviews/qheaderview.cpp
index eac25d3833..b609134322 100644
--- a/src/widgets/itemviews/qheaderview.cpp
+++ b/src/widgets/itemviews/qheaderview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -124,7 +116,7 @@ static const int maxSizeSection = 1048575; // since section size is in a bitfiel
 
     A header can be fixed in place, or made movable with setSectionsMovable(). It can
     be made clickable with setSectionsClickable(), and has resizing behavior in
-    accordance with setSectionResizeMode()
+    accordance with setSectionResizeMode().
 
     \note Double-clicking on a header to resize a section only applies for
     visible rows.
@@ -2671,8 +2663,9 @@ void QHeaderView::paintSection(QPainter *painter, const QRect &rect, int logical
     opt.iconAlignment = Qt::AlignVCenter;
     opt.text = d->model->headerData(logicalIndex, d->orientation,
                                     Qt::DisplayRole).toString();
+    const int margin = 2 * style()->pixelMetric(QStyle::PM_HeaderMargin, 0, this);
     if (d->textElideMode != Qt::ElideNone)
-        opt.text = opt.fontMetrics.elidedText(opt.text, d->textElideMode , rect.width() - 4);
+        opt.text = opt.fontMetrics.elidedText(opt.text, d->textElideMode , rect.width() - margin);
 
     QVariant variant = d->model->headerData(logicalIndex, d->orientation,
                                     Qt::DecorationRole);
@@ -3635,25 +3628,42 @@ void QHeaderViewPrivate::write(QDataStream &out) const
 bool QHeaderViewPrivate::read(QDataStream &in)
 {
     int orient, order, align, global;
-    in >> orient;
-    orientation = (Qt::Orientation)orient;
+    int sortIndicatorSectionIn;
+    bool sortIndicatorShownIn;
+    int lengthIn;
+    QVector<int> visualIndicesIn;
+    QVector<int> logicalIndicesIn;
+    QHash<int, int> hiddenSectionSizeIn;
 
+    in >> orient;
     in >> order;
-    sortIndicatorOrder = (Qt::SortOrder)order;
 
-    in >> sortIndicatorSection;
-    in >> sortIndicatorShown;
+    in >> sortIndicatorSectionIn;
+    in >> sortIndicatorShownIn;
 
-    in >> visualIndices;
-    in >> logicalIndices;
+    in >> visualIndicesIn;
+    in >> logicalIndicesIn;
 
     QBitArray sectionHidden;
     in >> sectionHidden;
-    in >> hiddenSectionSize;
+    in >> hiddenSectionSizeIn;
+    in >> lengthIn;
 
-    in >> length;
     int unusedSectionCount; // For compatibility
     in >> unusedSectionCount;
+
+    if (in.status() != QDataStream::Ok || lengthIn < 0)
+        return false;
+
+    orientation = static_cast<Qt::Orientation>(orient);
+    sortIndicatorOrder = static_cast<Qt::SortOrder>(order);
+    sortIndicatorSection = sortIndicatorSectionIn;
+    sortIndicatorShown = sortIndicatorShownIn;
+    visualIndices = visualIndicesIn;
+    logicalIndices = logicalIndicesIn;
+    hiddenSectionSize = hiddenSectionSizeIn;
+    length = lengthIn;
+
     in >> movableSections;
     in >> clickableSections;
     in >> highlightSelected;
diff --git a/src/widgets/itemviews/qheaderview.h b/src/widgets/itemviews/qheaderview.h
index bfe36e9b19..4a627b26b4 100644
--- a/src/widgets/itemviews/qheaderview.h
+++ b/src/widgets/itemviews/qheaderview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qheaderview_p.h b/src/widgets/itemviews/qheaderview_p.h
index 81f1b176ee..fd99ea5474 100644
--- a/src/widgets/itemviews/qheaderview_p.h
+++ b/src/widgets/itemviews/qheaderview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qitemdelegate.cpp b/src/widgets/itemviews/qitemdelegate.cpp
index 6a1fe22395..ef14ab8ed5 100644
--- a/src/widgets/itemviews/qitemdelegate.cpp
+++ b/src/widgets/itemviews/qitemdelegate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qitemdelegate.h b/src/widgets/itemviews/qitemdelegate.h
index 2866a4bb8b..55b33b69b2 100644
--- a/src/widgets/itemviews/qitemdelegate.h
+++ b/src/widgets/itemviews/qitemdelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qitemeditorfactory.cpp b/src/widgets/itemviews/qitemeditorfactory.cpp
index b4e155c087..2e8cca2997 100644
--- a/src/widgets/itemviews/qitemeditorfactory.cpp
+++ b/src/widgets/itemviews/qitemeditorfactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -558,7 +550,7 @@ void QExpandingLineEdit::updateMinimumWidth()
     getContentsMargins(&left, 0, &right, 0);
     width += left + right;
 
-    QStyleOptionFrameV2 opt;
+    QStyleOptionFrame opt;
     initStyleOption(&opt);
 
     int minWidth = style()->sizeFromContents(QStyle::CT_LineEdit, &opt, QSize(width, 0).
diff --git a/src/widgets/itemviews/qitemeditorfactory.h b/src/widgets/itemviews/qitemeditorfactory.h
index 9affe14925..254cff8947 100644
--- a/src/widgets/itemviews/qitemeditorfactory.h
+++ b/src/widgets/itemviews/qitemeditorfactory.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qitemeditorfactory_p.h b/src/widgets/itemviews/qitemeditorfactory_p.h
index c652da764c..9b46f1c728 100644
--- a/src/widgets/itemviews/qitemeditorfactory_p.h
+++ b/src/widgets/itemviews/qitemeditorfactory_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qlistview.cpp b/src/widgets/itemviews/qlistview.cpp
index 135f89d4ac..a097228846 100644
--- a/src/widgets/itemviews/qlistview.cpp
+++ b/src/widgets/itemviews/qlistview.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Samuel Gaist <samuel.gaist@deltech.ch>
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1846,14 +1838,44 @@ void QCommonListViewBase::updateHorizontalScrollBar(const QSize &step)
 {
     horizontalScrollBar()->setSingleStep(step.width() + spacing());
     horizontalScrollBar()->setPageStep(viewport()->width());
-    horizontalScrollBar()->setRange(0, contentsSize.width() - viewport()->width());
+
+    // If both scroll bars are set to auto, we might end up in a situation with enough space
+    // for the actual content. But still one of the scroll bars will become enabled due to
+    // the other one using the space. The other one will become invisible in the same cycle.
+    // -> Infinite loop, QTBUG-39902
+    const bool bothScrollBarsAuto = qq->verticalScrollBarPolicy() == Qt::ScrollBarAsNeeded &&
+                                    qq->horizontalScrollBarPolicy() == Qt::ScrollBarAsNeeded;
+
+    if (bothScrollBarsAuto && contentsSize.width() - qq->verticalScrollBar()->width() <= viewport()->width()
+                           && contentsSize.height() - qq->horizontalScrollBar()->height() <= viewport()->height()) {
+        // break the infinite loop described above by setting the range to 0, 0.
+        // QAbstractScrollArea will then hide the scroll bar for us
+        horizontalScrollBar()->setRange(0, 0);
+    } else {
+        horizontalScrollBar()->setRange(0, contentsSize.width() - viewport()->width());
+    }
 }
 
 void QCommonListViewBase::updateVerticalScrollBar(const QSize &step)
 {
     verticalScrollBar()->setSingleStep(step.height() + spacing());
     verticalScrollBar()->setPageStep(viewport()->height());
-    verticalScrollBar()->setRange(0, contentsSize.height() - viewport()->height());
+
+    // If both scroll bars are set to auto, we might end up in a situation with enough space
+    // for the actual content. But still one of the scroll bars will become enabled due to
+    // the other one using the space. The other one will become invisible in the same cycle.
+    // -> Infinite loop, QTBUG-39902
+    const bool bothScrollBarsAuto = qq->verticalScrollBarPolicy() == Qt::ScrollBarAsNeeded &&
+                                    qq->horizontalScrollBarPolicy() == Qt::ScrollBarAsNeeded;
+
+    if (bothScrollBarsAuto && contentsSize.width() - qq->verticalScrollBar()->width() <= viewport()->width()
+                           && contentsSize.height() - qq->horizontalScrollBar()->height() <= viewport()->height()) {
+        // break the infinite loop described above by setting the range to 0, 0.
+        // QAbstractScrollArea will then hide the scroll bar for us
+        verticalScrollBar()->setRange(0, 0);
+    } else {
+        verticalScrollBar()->setRange(0, contentsSize.height() - viewport()->height());
+    }
 }
 
 void QCommonListViewBase::scrollContentsBy(int dx, int dy, bool /*scrollElasticBand*/)
diff --git a/src/widgets/itemviews/qlistview.h b/src/widgets/itemviews/qlistview.h
index a973dfb221..ed0972413b 100644
--- a/src/widgets/itemviews/qlistview.h
+++ b/src/widgets/itemviews/qlistview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qlistview_p.h b/src/widgets/itemviews/qlistview_p.h
index 4f3ccedb62..e492e87b8f 100644
--- a/src/widgets/itemviews/qlistview_p.h
+++ b/src/widgets/itemviews/qlistview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qlistwidget.cpp b/src/widgets/itemviews/qlistwidget.cpp
index f376583f55..51561ac23b 100644
--- a/src/widgets/itemviews/qlistwidget.cpp
+++ b/src/widgets/itemviews/qlistwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qlistwidget.h b/src/widgets/itemviews/qlistwidget.h
index a7f993d25c..753ad250cd 100644
--- a/src/widgets/itemviews/qlistwidget.h
+++ b/src/widgets/itemviews/qlistwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qlistwidget_p.h b/src/widgets/itemviews/qlistwidget_p.h
index 2181a77fcb..b019cd5eaf 100644
--- a/src/widgets/itemviews/qlistwidget_p.h
+++ b/src/widgets/itemviews/qlistwidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qstyleditemdelegate.cpp b/src/widgets/itemviews/qstyleditemdelegate.cpp
index b5fc8d7d63..fd4fb4440e 100644
--- a/src/widgets/itemviews/qstyleditemdelegate.cpp
+++ b/src/widgets/itemviews/qstyleditemdelegate.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qstyleditemdelegate.h b/src/widgets/itemviews/qstyleditemdelegate.h
index aeb25a55b7..b523263bd9 100644
--- a/src/widgets/itemviews/qstyleditemdelegate.h
+++ b/src/widgets/itemviews/qstyleditemdelegate.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtableview.cpp b/src/widgets/itemviews/qtableview.cpp
index a252428a81..b5eb509766 100644
--- a/src/widgets/itemviews/qtableview.cpp
+++ b/src/widgets/itemviews/qtableview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1821,8 +1813,15 @@ QModelIndex QTableView::moveCursor(CursorAction cursorAction, Qt::KeyboardModifi
         return QModelIndex();
 
     QModelIndex result = d->model->index(logicalRow, logicalColumn, d->root);
-    if (!d->isRowHidden(logicalRow) && !d->isColumnHidden(logicalColumn) && d->isIndexEnabled(result))
+    if (!d->isRowHidden(logicalRow) && !d->isColumnHidden(logicalColumn) && d->isIndexEnabled(result)) {
+        if (d->hasSpans()) {
+            QSpanCollection::Span span = d->span(result.row(), result.column());
+            if (span.width() > 1 || span.height() > 1) {
+                result = d->model->sibling(span.top(), span.left(), result);
+            }
+        }
         return result;
+    }
 
     return QModelIndex();
 }
diff --git a/src/widgets/itemviews/qtableview.h b/src/widgets/itemviews/qtableview.h
index 387d24c608..66e1318fad 100644
--- a/src/widgets/itemviews/qtableview.h
+++ b/src/widgets/itemviews/qtableview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtableview_p.h b/src/widgets/itemviews/qtableview_p.h
index 555ae50daf..63bd1649e5 100644
--- a/src/widgets/itemviews/qtableview_p.h
+++ b/src/widgets/itemviews/qtableview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtablewidget.cpp b/src/widgets/itemviews/qtablewidget.cpp
index bec690d0d0..7c24819c0e 100644
--- a/src/widgets/itemviews/qtablewidget.cpp
+++ b/src/widgets/itemviews/qtablewidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtablewidget.h b/src/widgets/itemviews/qtablewidget.h
index fba76129a7..a1d5b4e172 100644
--- a/src/widgets/itemviews/qtablewidget.h
+++ b/src/widgets/itemviews/qtablewidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtablewidget_p.h b/src/widgets/itemviews/qtablewidget_p.h
index 43eb56a4a5..50b5a66eb5 100644
--- a/src/widgets/itemviews/qtablewidget_p.h
+++ b/src/widgets/itemviews/qtablewidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtreeview.cpp b/src/widgets/itemviews/qtreeview.cpp
index 3f952ff768..2c5f4b7c72 100644
--- a/src/widgets/itemviews/qtreeview.cpp
+++ b/src/widgets/itemviews/qtreeview.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -109,6 +101,10 @@ QT_BEGIN_NAMESPACE
     its header. If this value is set to true, this property will override the
     resize mode set on the last section in the header.
 
+    By default, all columns in a tree view are movable except the first. To
+    disable movement of these columns, use QHeaderView's
+    \l {QHeaderView::}{setSectionsMovable()} function. For more information
+    about rearranging sections, see \l {Moving Header Sections}.
 
     \section1 Key Bindings
 
@@ -371,7 +367,9 @@ void QTreeView::setAutoExpandDelay(int delay)
   horizontal distance from the viewport edge to the items in the first column;
   for child items, it specifies their indentation from their parent items.
 
-  By default, this property has a value of 20.
+  By default, the value of this property is style dependent. Thus, when the style
+  changes, this property updates from it. Calling setIndentation() stops the updates,
+  calling resetIndentation() will restore default behavior.
 */
 int QTreeView::indentation() const
 {
@@ -382,12 +380,22 @@ int QTreeView::indentation() const
 void QTreeView::setIndentation(int i)
 {
     Q_D(QTreeView);
-    if (i != d->indent) {
+    if (!d->customIndent || (i != d->indent)) {
         d->indent = i;
+        d->customIndent = true;
         d->viewport->update();
     }
 }
 
+void QTreeView::resetIndentation()
+{
+    Q_D(QTreeView);
+    if (d->customIndent) {
+        d->updateIndentationFromStyle();
+        d->customIndent = false;
+    }
+}
+
 /*!
   \property QTreeView::rootIsDecorated
   \brief whether to show controls for expanding and collapsing top-level items
@@ -2081,6 +2089,12 @@ QModelIndex QTreeView::indexBelow(const QModelIndex &index) const
 void QTreeView::doItemsLayout()
 {
     Q_D(QTreeView);
+    if (!d->customIndent) {
+        // ### Qt 6: move to event()
+        // QAbstractItemView calls this method in case of a style change,
+        // so update the indentation here if it wasn't set manually.
+        d->updateIndentationFromStyle();
+    }
     if (d->hasRemovedItems) {
         //clean the QSet that may contains old (and this invalid) indexes
         d->hasRemovedItems = false;
@@ -3025,6 +3039,8 @@ bool QTreeView::isIndexHidden(const QModelIndex &index) const
 void QTreeViewPrivate::initialize()
 {
     Q_Q(QTreeView);
+
+    updateIndentationFromStyle();
     updateStyledFrameWidths();
     q->setSelectionBehavior(QAbstractItemView::SelectRows);
     q->setSelectionMode(QAbstractItemView::SingleSelection);
@@ -3911,6 +3927,12 @@ int QTreeViewPrivate::accessibleTree2Index(const QModelIndex &index) const
     return (q->visualIndex(index) + (q->header() ? 1 : 0)) * index.model()->columnCount() + index.column();
 }
 
+void QTreeViewPrivate::updateIndentationFromStyle()
+{
+    Q_Q(const QTreeView);
+    indent = q->style()->pixelMetric(QStyle::PM_TreeViewIndentation, 0, q);
+}
+
 /*!
   \reimp
  */
diff --git a/src/widgets/itemviews/qtreeview.h b/src/widgets/itemviews/qtreeview.h
index 429b9d3add..afdb94d770 100644
--- a/src/widgets/itemviews/qtreeview.h
+++ b/src/widgets/itemviews/qtreeview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,7 +48,7 @@ class Q_WIDGETS_EXPORT QTreeView : public QAbstractItemView
 {
     Q_OBJECT
     Q_PROPERTY(int autoExpandDelay READ autoExpandDelay WRITE setAutoExpandDelay)
-    Q_PROPERTY(int indentation READ indentation WRITE setIndentation)
+    Q_PROPERTY(int indentation READ indentation WRITE setIndentation RESET resetIndentation)
     Q_PROPERTY(bool rootIsDecorated READ rootIsDecorated WRITE setRootIsDecorated)
     Q_PROPERTY(bool uniformRowHeights READ uniformRowHeights WRITE setUniformRowHeights)
     Q_PROPERTY(bool itemsExpandable READ itemsExpandable WRITE setItemsExpandable)
@@ -83,6 +75,7 @@ public:
 
     int indentation() const;
     void setIndentation(int i);
+    void resetIndentation();
 
     bool rootIsDecorated() const;
     void setRootIsDecorated(bool show);
diff --git a/src/widgets/itemviews/qtreeview_p.h b/src/widgets/itemviews/qtreeview_p.h
index 5d6333e856..bc444eb37f 100644
--- a/src/widgets/itemviews/qtreeview_p.h
+++ b/src/widgets/itemviews/qtreeview_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -89,7 +81,7 @@ public:
           uniformRowHeights(false), rootDecoration(true),
           itemsExpandable(true), sortingEnabled(false),
           expandsOnDoubleClick(true),
-          allColumnsShowFocus(false), current(0), spanning(false),
+          allColumnsShowFocus(false), customIndent(false), current(0), spanning(false),
           animationsEnabled(false), columnResizeTimerID(0),
           autoExpandDelay(-1), hoverBranch(-1), geometryRecursionBlock(false), hasRemovedItems(false),
           treePosition(0) {}
@@ -191,6 +183,7 @@ public:
     bool sortingEnabled;
     bool expandsOnDoubleClick;
     bool allColumnsShowFocus;
+    bool customIndent;
 
     // used for drawing
     mutable QPair<int,int> leftAndRight;
@@ -241,6 +234,8 @@ public:
 
     int accessibleTree2Index(const QModelIndex &index) const;
 
+    void updateIndentationFromStyle();
+
     // used for spanning rows
     QVector<QPersistentModelIndex> spanningIndexes;
 
diff --git a/src/widgets/itemviews/qtreewidget.cpp b/src/widgets/itemviews/qtreewidget.cpp
index 6b9ccf5043..0a4e57812a 100644
--- a/src/widgets/itemviews/qtreewidget.cpp
+++ b/src/widgets/itemviews/qtreewidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtreewidget.h b/src/widgets/itemviews/qtreewidget.h
index 7aa927a443..b2b477289d 100644
--- a/src/widgets/itemviews/qtreewidget.h
+++ b/src/widgets/itemviews/qtreewidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtreewidget_p.h b/src/widgets/itemviews/qtreewidget_p.h
index 620520bd79..ec1395b9fb 100644
--- a/src/widgets/itemviews/qtreewidget_p.h
+++ b/src/widgets/itemviews/qtreewidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtreewidgetitemiterator.cpp b/src/widgets/itemviews/qtreewidgetitemiterator.cpp
index f99b3899df..90824e7aac 100644
--- a/src/widgets/itemviews/qtreewidgetitemiterator.cpp
+++ b/src/widgets/itemviews/qtreewidgetitemiterator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtreewidgetitemiterator.h b/src/widgets/itemviews/qtreewidgetitemiterator.h
index 01efbc88f2..b4b7f5ef4a 100644
--- a/src/widgets/itemviews/qtreewidgetitemiterator.h
+++ b/src/widgets/itemviews/qtreewidgetitemiterator.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qtreewidgetitemiterator_p.h b/src/widgets/itemviews/qtreewidgetitemiterator_p.h
index cf2d32cb62..e57926b0bf 100644
--- a/src/widgets/itemviews/qtreewidgetitemiterator_p.h
+++ b/src/widgets/itemviews/qtreewidgetitemiterator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/itemviews/qwidgetitemdata_p.h b/src/widgets/itemviews/qwidgetitemdata_p.h
index a8ab58174f..82affac72a 100644
--- a/src/widgets/itemviews/qwidgetitemdata_p.h
+++ b/src/widgets/itemviews/qwidgetitemdata_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/kernel.pri b/src/widgets/kernel/kernel.pri
index 857fe4ac91..88c1e2595b 100644
--- a/src/widgets/kernel/kernel.pri
+++ b/src/widgets/kernel/kernel.pri
@@ -33,8 +33,8 @@ HEADERS += \
 	kernel/qstandardgestures_p.h \
 	kernel/qgesturerecognizer.h \
 	kernel/qgesturemanager_p.h \
-        kernel/qdesktopwidget_qpa_p.h \
-        kernel/qwidgetwindow_qpa_p.h \
+        kernel/qdesktopwidget_p.h \
+        kernel/qwidgetwindow_p.h \
         kernel/qwindowcontainer_p.h
 
 SOURCES += \
@@ -60,9 +60,6 @@ SOURCES += \
 	kernel/qgesturemanager.cpp \
         kernel/qdesktopwidget.cpp \
         kernel/qwidgetsvariant.cpp \
-        kernel/qapplication_qpa.cpp \
-        kernel/qdesktopwidget_qpa.cpp \
-        kernel/qwidget_qpa.cpp \
         kernel/qwidgetwindow.cpp \
         kernel/qwindowcontainer.cpp
 
@@ -81,6 +78,6 @@ wince*: {
 }
 
 contains(QT_CONFIG, opengl) {
-    HEADERS += kernel/qopenglwidget_p.h
+    HEADERS += kernel/qopenglwidget.h
     SOURCES += kernel/qopenglwidget.cpp
 }
diff --git a/src/widgets/kernel/qaction.cpp b/src/widgets/kernel/qaction.cpp
index c0e3e98ae1..b6cf7779a4 100644
--- a/src/widgets/kernel/qaction.cpp
+++ b/src/widgets/kernel/qaction.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -261,7 +253,7 @@ void QActionPrivate::setShortcutEnabled(bool enable, QShortcutMap &map)
 /*!
     \enum QAction::MenuRole
 
-    This enum describes how an action should be moved into the application menu on Mac OS X.
+    This enum describes how an action should be moved into the application menu on OS X.
 
     \value NoRole This action should not be put into the application menu
     \value TextHeuristicRole This action should be put in the application menu based on the action's text
@@ -270,7 +262,7 @@ void QActionPrivate::setShortcutEnabled(bool enable, QShortcutMap &map)
     \value AboutQtRole This action matches handles the "About Qt" menu item.
     \value AboutRole This action should be placed where the "About" menu item is in the application menu. The text of
            the menu item will be set to "About <application name>". The application name is fetched from the
-           \c{Info.plist} file in the application's bundle (See \l{Qt for Mac OS X - Deployment}).
+           \c{Info.plist} file in the application's bundle (See \l{Qt for OS X - Deployment}).
     \value PreferencesRole This action should be placed where the  "Preferences..." menu item is in the application menu.
     \value QuitRole This action should be placed where the Quit menu item is in the application menu.
 
@@ -1247,7 +1239,7 @@ void QAction::activate(ActionEvent event)
     the action is added based on its text (see QMenuBar for more information).
 
     The menu role can only be changed before the actions are put into the menu
-    bar in Mac OS X (usually just before the first application window is
+    bar in OS X (usually just before the first application window is
     shown).
 */
 void QAction::setMenuRole(MenuRole menuRole)
diff --git a/src/widgets/kernel/qaction.h b/src/widgets/kernel/qaction.h
index f2346acfcd..15364b4785 100644
--- a/src/widgets/kernel/qaction.h
+++ b/src/widgets/kernel/qaction.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qaction_p.h b/src/widgets/kernel/qaction_p.h
index 70c9b4ad2b..a33f663a6f 100644
--- a/src/widgets/kernel/qaction_p.h
+++ b/src/widgets/kernel/qaction_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qactiongroup.cpp b/src/widgets/kernel/qactiongroup.cpp
index 8f1b01eca5..052dbe2aa0 100644
--- a/src/widgets/kernel/qactiongroup.cpp
+++ b/src/widgets/kernel/qactiongroup.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qactiongroup.h b/src/widgets/kernel/qactiongroup.h
index eab1d8bd43..b402f50164 100644
--- a/src/widgets/kernel/qactiongroup.h
+++ b/src/widgets/kernel/qactiongroup.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qapplication.cpp b/src/widgets/kernel/qapplication.cpp
index 04d398206b..8f6c5d748c 100644
--- a/src/widgets/kernel/qapplication.cpp
+++ b/src/widgets/kernel/qapplication.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -57,6 +49,7 @@
 #include "qstyleoption.h"
 #include "qstylefactory.h"
 #include "qtextcodec.h"
+#include "qtooltip.h"
 #include "qtranslator.h"
 #include "qvariant.h"
 #include "qwidget.h"
@@ -67,7 +60,7 @@
 #include "private/qstylesheetstyle_p.h"
 #include "private/qstyle_p.h"
 #include "qmessagebox.h"
-#include "qwidgetwindow_qpa_p.h"
+#include "qwidgetwindow_p.h"
 #include <QtWidgets/qgraphicsproxywidget.h>
 #include <QtGui/qstylehints.h>
 #include <QtGui/qinputmethod.h>
@@ -77,6 +70,7 @@
 #endif
 
 #include "private/qkeymapper_p.h"
+#include "private/qaccessiblewidgetfactory_p.h"
 
 #include <qthread.h>
 #include <private/qthread_p.h>
@@ -93,6 +87,10 @@
 #include "private/qgesturemanager_p.h"
 #include <qpa/qplatformfontdatabase.h>
 
+#ifdef Q_OS_WIN
+#include <QtCore/qt_windows.h> // for qt_win_display_dc()
+#endif
+
 #include "qdatetime.h"
 
 #ifdef Q_OS_WINCE
@@ -184,6 +182,11 @@ QApplicationPrivate::~QApplicationPrivate()
         self = 0;
 }
 
+void QApplicationPrivate::createEventDispatcher()
+{
+    QGuiApplicationPrivate::createEventDispatcher();
+}
+
 /*!
     \class QApplication
     \brief The QApplication class manages the GUI application's control
@@ -361,6 +364,14 @@ QApplicationPrivate::~QApplicationPrivate()
     Returns the top-level widget at the given \a point; returns 0 if
     there is no such widget.
 */
+QWidget *QApplication::topLevelAt(const QPoint &pos)
+{
+    if (const QWindow *window = QGuiApplication::topLevelAt(pos)) {
+        if (const QWidgetWindow *widgetWindow = qobject_cast<const QWidgetWindow *>(window))
+            return widgetWindow->widget();
+    }
+    return 0;
+}
 
 /*!
     \fn QWidget *QApplication::topLevelAt(int x, int y)
@@ -371,12 +382,6 @@ QApplicationPrivate::~QApplicationPrivate()
     0 if there is no such widget.
 */
 
-
-/*
-    The qt_init() and qt_cleanup() functions are implemented in the
-    qapplication_xyz.cpp file.
-*/
-
 void qt_init(QApplicationPrivate *priv, int type
    );
 void qt_init_tooltip_palette();
@@ -576,6 +581,31 @@ void QApplicationPrivate::construct()
     extern void qt_gui_eval_init(QCoreApplicationPrivate::Type);
     qt_gui_eval_init(application_type);
 #endif
+#ifndef QT_NO_ACCESSIBILITY
+    // factory for accessible interfaces for widgets shipped with Qt
+    QAccessible::installFactory(&qAccessibleFactory);
+#endif
+
+}
+
+void qt_init(QApplicationPrivate *priv, int type)
+{
+    Q_UNUSED(priv);
+    Q_UNUSED(type);
+
+    QColormap::initialize();
+
+    qt_init_tooltip_palette();
+
+    QApplicationPrivate::initializeWidgetFontHash();
+}
+
+void qt_init_tooltip_palette()
+{
+#ifndef QT_NO_TOOLTIP
+    if (const QPalette *toolTipPalette = QGuiApplicationPrivate::platformTheme()->palette(QPlatformTheme::ToolTipPalette))
+        QToolTip::setPalette(*toolTipPalette);
+#endif
 }
 
 #ifndef QT_NO_STATEMACHINE
@@ -634,6 +664,91 @@ void QApplicationPrivate::initialize()
     is_app_running = true; // no longer starting up
 }
 
+static void setPossiblePalette(const QPalette *palette, const char *className)
+{
+    if (palette == 0)
+        return;
+    QApplicationPrivate::setPalette_helper(*palette, className, false);
+}
+
+void QApplicationPrivate::initializeWidgetPaletteHash()
+{
+    QPlatformTheme *platformTheme = QGuiApplicationPrivate::platformTheme();
+    if (!platformTheme)
+        return;
+    qt_app_palettes_hash()->clear();
+
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::ToolButtonPalette), "QToolButton");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::ButtonPalette), "QAbstractButton");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::CheckBoxPalette), "QCheckBox");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::RadioButtonPalette), "QRadioButton");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::HeaderPalette), "QHeaderView");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::ItemViewPalette), "QAbstractItemView");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::MessageBoxLabelPalette), "QMessageBoxLabel");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::TabBarPalette), "QTabBar");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::LabelPalette), "QLabel");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::GroupBoxPalette), "QGroupBox");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::MenuPalette), "QMenu");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::MenuBarPalette), "QMenuBar");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::TextEditPalette), "QTextEdit");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::TextEditPalette), "QTextControl");
+    setPossiblePalette(platformTheme->palette(QPlatformTheme::TextLineEditPalette), "QLineEdit");
+}
+
+void QApplicationPrivate::initializeWidgetFontHash()
+{
+    const QPlatformTheme *theme = QGuiApplicationPrivate::platformTheme();
+    if (!theme)
+        return;
+    FontHash *fontHash = qt_app_fonts_hash();
+    fontHash->clear();
+
+    if (const QFont *font = theme->font(QPlatformTheme::MenuFont))
+        fontHash->insert(QByteArrayLiteral("QMenu"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::MenuBarFont))
+        fontHash->insert(QByteArrayLiteral("QMenuBar"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::MenuItemFont))
+        fontHash->insert(QByteArrayLiteral("QMenuItem"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::MessageBoxFont))
+        fontHash->insert(QByteArrayLiteral("QMessageBox"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::LabelFont))
+        fontHash->insert(QByteArrayLiteral("QLabel"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::TipLabelFont))
+        fontHash->insert(QByteArrayLiteral("QTipLabel"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::TitleBarFont))
+        fontHash->insert(QByteArrayLiteral("QTitleBar"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::StatusBarFont))
+        fontHash->insert(QByteArrayLiteral("QStatusBar"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::MdiSubWindowTitleFont))
+        fontHash->insert(QByteArrayLiteral("QMdiSubWindowTitleBar"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::DockWidgetTitleFont))
+        fontHash->insert(QByteArrayLiteral("QDockWidgetTitle"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::PushButtonFont))
+        fontHash->insert(QByteArrayLiteral("QPushButton"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::CheckBoxFont))
+        fontHash->insert(QByteArrayLiteral("QCheckBox"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::RadioButtonFont))
+        fontHash->insert(QByteArrayLiteral("QRadioButton"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::ToolButtonFont))
+        fontHash->insert(QByteArrayLiteral("QToolButton"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::ItemViewFont))
+        fontHash->insert(QByteArrayLiteral("QAbstractItemView"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::ListViewFont))
+        fontHash->insert(QByteArrayLiteral("QListViewFont"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::HeaderViewFont))
+        fontHash->insert(QByteArrayLiteral("QHeaderViewFont"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::ListBoxFont))
+        fontHash->insert(QByteArrayLiteral("QListBox"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::ComboMenuItemFont))
+        fontHash->insert(QByteArrayLiteral("QComboMenuItemFont"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::ComboLineEditFont))
+        fontHash->insert(QByteArrayLiteral("QComboLineEditFont"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::SmallFont))
+        fontHash->insert(QByteArrayLiteral("QSmallFont"), *font);
+    if (const QFont *font = theme->font(QPlatformTheme::MiniFont))
+        fontHash->insert(QByteArrayLiteral("QMiniFont"), *font);
+}
+
 /*****************************************************************************
   Functions returning the active popup and modal widgets.
  *****************************************************************************/
@@ -757,6 +872,32 @@ QApplication::~QApplication()
 #endif
 }
 
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
+// #fixme: Remove.
+static HDC         displayDC        = 0;                // display device context
+
+Q_WIDGETS_EXPORT HDC qt_win_display_dc()                        // get display DC
+{
+    Q_ASSERT(qApp && qApp->thread() == QThread::currentThread());
+    if (!displayDC)
+        displayDC = GetDC(0);
+    return displayDC;
+}
+#endif
+
+void qt_cleanup()
+{
+    QPixmapCache::clear();
+    QColormap::cleanup();
+
+    QApplicationPrivate::active_window = 0; //### this should not be necessary
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
+    if (displayDC) {
+        ReleaseDC(0, displayDC);
+        displayDC = 0;
+    }
+#endif
+}
 
 /*!
     \fn QWidget *QApplication::widgetAt(const QPoint &point)
@@ -2063,6 +2204,39 @@ void QApplication::setActiveWindow(QWidget* act)
     }
 }
 
+QWidget *qt_tlw_for_window(QWindow *wnd)
+{
+    // QTBUG-32177, wnd might be a QQuickView embedded via window container.
+    while (wnd && !wnd->isTopLevel()) {
+        QWindow *parent = wnd->parent();
+        // Don't end up in windows not belonging to this application
+        if (parent && parent->type() != Qt::ForeignWindow)
+            wnd = wnd->parent();
+        else
+            break;
+    }
+    if (wnd)
+        foreach (QWidget *tlw, qApp->topLevelWidgets())
+            if (tlw->windowHandle() == wnd)
+                return tlw;
+    return 0;
+}
+
+void QApplicationPrivate::notifyActiveWindowChange(QWindow *previous)
+{
+    Q_UNUSED(previous);
+    QWindow *wnd = QGuiApplicationPrivate::focus_window;
+    if (inPopupMode()) // some delayed focus event to ignore
+        return;
+    QWidget *tlw = qt_tlw_for_window(wnd);
+    QApplication::setActiveWindow(tlw);
+    // QTBUG-37126, Active X controls may set the focus on native child widgets.
+    if (wnd && tlw && wnd != tlw->windowHandle()) {
+        if (QWidgetWindow *widgetWindow = qobject_cast<QWidgetWindow *>(wnd))
+            widgetWindow->widget()->setFocus(Qt::ActiveWindowFocusReason);
+    }
+}
+
 /*!internal
  * Helper function that returns the new focus widget, but does not set the focus reason.
  * Returns 0 if a new focus widget could not be found.
@@ -2431,6 +2605,44 @@ bool QApplicationPrivate::tryModalHelper(QWidget *widget, QWidget **rettop)
     return !isBlockedByModal(widget->window());
 }
 
+bool qt_try_modal(QWidget *widget, QEvent::Type type)
+{
+    QWidget * top = 0;
+
+    if (QApplicationPrivate::tryModalHelper(widget, &top))
+        return true;
+
+    bool block_event  = false;
+
+    switch (type) {
+#if 0
+    case QEvent::Focus:
+        if (!static_cast<QWSFocusEvent*>(event)->simpleData.get_focus)
+            break;
+        // drop through
+#endif
+    case QEvent::MouseButtonPress:                        // disallow mouse/key events
+    case QEvent::MouseButtonRelease:
+    case QEvent::MouseMove:
+    case QEvent::KeyPress:
+    case QEvent::KeyRelease:
+        block_event         = true;
+        break;
+    default:
+        break;
+    }
+
+    if (block_event && top && top->parentWidget() == 0)
+        top->raise();
+
+    return !block_event;
+}
+
+bool QApplicationPrivate::modalState()
+{
+    return !self->modalWindowList.isEmpty();
+}
+
 /*
    \internal
 */
@@ -3026,7 +3238,8 @@ bool QApplication::notify(QObject *receiver, QEvent *e)
                 // feature without choice of opting-in or out, you ALWAYS have to have
                 // tracking enabled. Therefore, the other properties give a false sense of
                 // performance enhancement.
-                if (e->type() == QEvent::MouseMove && mouse->buttons() == 0) {
+                if (e->type() == QEvent::MouseMove && mouse->buttons() == 0
+                    && w->rect().contains(relpos)) { // Outside due to mouse grab?
                     d->toolTipWidget = w;
                     d->toolTipPos = relpos;
                     d->toolTipGlobalPos = mouse->globalPos();
@@ -3045,6 +3258,7 @@ bool QApplication::notify(QObject *receiver, QEvent *e)
                 me.spont = mouse->spontaneous();
                 me.setTimestamp(mouse->timestamp());
                 QGuiApplicationPrivate::setMouseEventFlags(&me, mouse->flags());
+                QGuiApplicationPrivate::setMouseEventSource(&me, mouse->source());
                 // throw away any mouse-tracking-only mouse events
                 if (!w->hasMouseTracking()
                     && mouse->type() == QEvent::MouseMove && mouse->buttons() == 0) {
@@ -3105,6 +3319,15 @@ bool QApplication::notify(QObject *receiver, QEvent *e)
         {
             QWidget* w = static_cast<QWidget *>(receiver);
             QWheelEvent* wheel = static_cast<QWheelEvent*>(e);
+
+            // QTBUG-40656, combo and other popups should close when the main window gets a wheel event.
+            while (QWidget *popup = QApplication::activePopupWidget()) {
+                if (w->window() != popup)
+                    popup->close();
+                else
+                    break;
+            }
+
             QPoint relpos = wheel->pos();
             bool eventAccepted = wheel->isAccepted();
 
@@ -3168,7 +3391,7 @@ bool QApplication::notify(QObject *receiver, QEvent *e)
                                 tablet->device(), tablet->pointerType(),
                                 tablet->pressure(), tablet->xTilt(), tablet->yTilt(),
                                 tablet->tangentialPressure(), tablet->rotation(), tablet->z(),
-                                tablet->modifiers(), tablet->uniqueId());
+                                tablet->modifiers(), tablet->uniqueId(), tablet->button(), tablet->buttons());
                 te.spont = e->spontaneous();
                 res = d->notify_helper(w, w == receiver ? tablet : &te);
                 eventAccepted = ((w == receiver) ? tablet : &te)->isAccepted();
@@ -3333,7 +3556,7 @@ bool QApplication::notify(QObject *receiver, QEvent *e)
             for (int i = 0; i < touchEvent->_touchPoints.size(); ++i) {
                 QTouchEvent::TouchPoint &pt = touchEvent->_touchPoints[i];
                 QRectF rect = pt.rect();
-                rect.moveCenter(offset);
+                rect.translate(offset);
                 pt.d->rect = rect;
                 pt.d->startPos = pt.startPos() + offset;
                 pt.d->lastPos = pt.lastPos() + offset;
@@ -3497,7 +3720,7 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 
     // deliver the event
     bool consumed = receiver->event(e);
-    e->spont = false;
+    QCoreApplicationPrivate::setEventSpontaneous(e, false);
     return consumed;
 }
 
@@ -3506,6 +3729,123 @@ bool QApplicationPrivate::inPopupMode()
     return QApplicationPrivate::popupWidgets != 0;
 }
 
+static void ungrabKeyboardForPopup(QWidget *popup)
+{
+    if (QWidget::keyboardGrabber())
+        qt_widget_private(QWidget::keyboardGrabber())->stealKeyboardGrab(true);
+    else
+        qt_widget_private(popup)->stealKeyboardGrab(false);
+}
+
+static void ungrabMouseForPopup(QWidget *popup)
+{
+    if (QWidget::mouseGrabber())
+        qt_widget_private(QWidget::mouseGrabber())->stealMouseGrab(true);
+    else
+        qt_widget_private(popup)->stealMouseGrab(false);
+}
+
+static bool popupGrabOk;
+
+static void grabForPopup(QWidget *popup)
+{
+    Q_ASSERT(popup->testAttribute(Qt::WA_WState_Created));
+    popupGrabOk = qt_widget_private(popup)->stealKeyboardGrab(true);
+    if (popupGrabOk) {
+        popupGrabOk = qt_widget_private(popup)->stealMouseGrab(true);
+        if (!popupGrabOk) {
+            // transfer grab back to the keyboard grabber if any
+            ungrabKeyboardForPopup(popup);
+        }
+    }
+}
+
+extern QWidget *qt_button_down;
+extern QWidget *qt_popup_down;
+extern bool qt_replay_popup_mouse_event;
+
+void QApplicationPrivate::closePopup(QWidget *popup)
+{
+    if (!popupWidgets)
+        return;
+    popupWidgets->removeAll(popup);
+
+     if (popup == qt_popup_down) {
+         qt_button_down = 0;
+         qt_popup_down = 0;
+     }
+
+    if (QApplicationPrivate::popupWidgets->count() == 0) { // this was the last popup
+        delete QApplicationPrivate::popupWidgets;
+        QApplicationPrivate::popupWidgets = 0;
+
+        if (popupGrabOk) {
+            popupGrabOk = false;
+
+            if (popup->geometry().contains(QPoint(QGuiApplicationPrivate::mousePressX,
+                                                  QGuiApplicationPrivate::mousePressY))
+                || popup->testAttribute(Qt::WA_NoMouseReplay)) {
+                // mouse release event or inside
+                qt_replay_popup_mouse_event = false;
+            } else { // mouse press event
+                qt_replay_popup_mouse_event = true;
+            }
+
+            // transfer grab back to mouse grabber if any, otherwise release the grab
+            ungrabMouseForPopup(popup);
+
+            // transfer grab back to keyboard grabber if any, otherwise release the grab
+            ungrabKeyboardForPopup(popup);
+        }
+
+        if (active_window) {
+            if (QWidget *fw = active_window->focusWidget()) {
+                if (fw != QApplication::focusWidget()) {
+                    fw->setFocus(Qt::PopupFocusReason);
+                } else {
+                    QFocusEvent e(QEvent::FocusIn, Qt::PopupFocusReason);
+                    QCoreApplication::sendEvent(fw, &e);
+                }
+            }
+        }
+
+    } else {
+        // A popup was closed, so the previous popup gets the focus.
+        QWidget* aw = QApplicationPrivate::popupWidgets->last();
+        if (QWidget *fw = aw->focusWidget())
+            fw->setFocus(Qt::PopupFocusReason);
+
+        if (QApplicationPrivate::popupWidgets->count() == 1) // grab mouse/keyboard
+            grabForPopup(aw);
+    }
+
+}
+
+int openPopupCount = 0;
+
+void QApplicationPrivate::openPopup(QWidget *popup)
+{
+    openPopupCount++;
+    if (!popupWidgets) // create list
+        popupWidgets = new QWidgetList;
+    popupWidgets->append(popup); // add to end of list
+
+    if (QApplicationPrivate::popupWidgets->count() == 1) // grab mouse/keyboard
+        grabForPopup(popup);
+
+    // popups are not focus-handled by the window system (the first
+    // popup grabbed the keyboard), so we have to do that manually: A
+    // new popup gets the focus
+    if (popup->focusWidget()) {
+        popup->focusWidget()->setFocus(Qt::PopupFocusReason);
+    } else if (popupWidgets->count() == 1) { // this was the first popup
+        if (QWidget *fw = QApplication::focusWidget()) {
+            QFocusEvent e(QEvent::FocusOut, Qt::PopupFocusReason);
+            QApplication::sendEvent(fw, &e);
+        }
+    }
+}
+
 #ifdef QT_KEYPAD_NAVIGATION
 /*!
     Sets the kind of focus navigation Qt should use to \a mode.
@@ -3610,6 +3950,18 @@ bool QApplication::keypadNavigationEnabled()
     window must not be hidden (i.e. not have hide() called on it, but be
     visible in some sort of way) in order for this to work.
 */
+void QApplication::alert(QWidget *widget, int duration)
+{
+    if (widget) {
+       if (widget->window()->isActiveWindow() && !(widget->window()->windowState() & Qt::WindowMinimized))
+            return;
+        if (QWindow *window= QApplicationPrivate::windowForWidget(widget))
+            window->alert(duration);
+    } else {
+        foreach (QWidget *topLevel, topLevelWidgets())
+            QApplication::alert(topLevel, duration);
+    }
+}
 
 /*!
     \property QApplication::cursorFlashTime
@@ -3700,6 +4052,38 @@ int QApplication::keyboardInputInterval()
 
     By default, this property has a value of 3.
 */
+#ifndef QT_NO_WHEELEVENT
+int QApplication::wheelScrollLines()
+{
+    return QApplicationPrivate::wheel_scroll_lines;
+}
+
+void QApplication::setWheelScrollLines(int lines)
+{
+    QApplicationPrivate::wheel_scroll_lines = lines;
+}
+#endif
+
+static inline int uiEffectToFlag(Qt::UIEffect effect)
+{
+    switch (effect) {
+    case Qt::UI_General:
+        return QPlatformTheme::GeneralUiEffect;
+    case Qt::UI_AnimateMenu:
+        return QPlatformTheme::AnimateMenuUiEffect;
+    case Qt::UI_FadeMenu:
+        return QPlatformTheme::FadeMenuUiEffect;
+    case Qt::UI_AnimateCombo:
+        return QPlatformTheme::AnimateComboUiEffect;
+    case Qt::UI_AnimateTooltip:
+        return QPlatformTheme::AnimateTooltipUiEffect;
+    case Qt::UI_FadeTooltip:
+        return QPlatformTheme::FadeTooltipUiEffect;
+    case Qt::UI_AnimateToolBox:
+        return QPlatformTheme::AnimateToolBoxUiEffect;
+    }
+    return 0;
+}
 
 /*!
     \fn void QApplication::setEffectEnabled(Qt::UIEffect effect, bool enable)
@@ -3712,6 +4096,19 @@ int QApplication::keyboardInputInterval()
 
     \sa isEffectEnabled(), Qt::UIEffect, setDesktopSettingsAware()
 */
+void QApplication::setEffectEnabled(Qt::UIEffect effect, bool enable)
+{
+    int effectFlags = uiEffectToFlag(effect);
+    if (enable) {
+        if (effectFlags & QPlatformTheme::FadeMenuUiEffect)
+            effectFlags |= QPlatformTheme::AnimateMenuUiEffect;
+        if (effectFlags & QPlatformTheme::FadeTooltipUiEffect)
+            effectFlags |= QPlatformTheme::AnimateTooltipUiEffect;
+        QApplicationPrivate::enabledAnimations |= effectFlags;
+    } else {
+        QApplicationPrivate::enabledAnimations &= ~effectFlags;
+    }
+}
 
 /*!
     \fn bool QApplication::isEffectEnabled(Qt::UIEffect effect)
@@ -3726,6 +4123,12 @@ int QApplication::keyboardInputInterval()
 
     \sa setEffectEnabled(), Qt::UIEffect
 */
+bool QApplication::isEffectEnabled(Qt::UIEffect effect)
+{
+    return QColormap::instance().depth() >= 16
+           && (QApplicationPrivate::enabledAnimations & QPlatformTheme::GeneralUiEffect)
+           && (QApplicationPrivate::enabledAnimations & uiEffectToFlag(effect));
+}
 
 /*!
     \fn void QApplication::beep()
@@ -3733,6 +4136,10 @@ int QApplication::keyboardInputInterval()
     Sounds the bell, using the default volume and sound. The function is \e not
     available in Qt for Embedded Linux.
 */
+void QApplication::beep()
+{
+    QMetaObject::invokeMethod(QGuiApplication::platformNativeInterface(), "beep");
+}
 
 /*!
     \macro qApp
@@ -3845,11 +4252,19 @@ void QApplicationPrivate::initializeMultitouch()
     initializeMultitouch_sys();
 }
 
+void QApplicationPrivate::initializeMultitouch_sys()
+{
+}
+
 void QApplicationPrivate::cleanupMultitouch()
 {
     cleanupMultitouch_sys();
 }
 
+void QApplicationPrivate::cleanupMultitouch_sys()
+{
+}
+
 QWidget *QApplicationPrivate::findClosestTouchPointTarget(QTouchDevice *device, const QPointF &screenPos)
 {
     int closestTouchPointId = -1;
@@ -3930,7 +4345,16 @@ bool QApplicationPrivate::translateRawTouchEvent(QWidget *window,
         }
         Q_ASSERT(target.data() != 0);
 
-        StatesAndTouchPoints &maskAndPoints = widgetsNeedingEvents[static_cast<QWidget *>(target.data())];
+        QWidget *targetWidget = static_cast<QWidget *>(target.data());
+
+#ifdef Q_OS_OSX
+        // Single-touch events are normally not sent unless WA_TouchPadAcceptSingleTouchEvents is set.
+        // In Qt 4 this check was in OS X-only coode. That behavior is preserved here by the #ifdef.
+        if (touchPoints.count() == 1 && !targetWidget->testAttribute(Qt::WA_TouchPadAcceptSingleTouchEvents))
+            continue;
+#endif
+
+        StatesAndTouchPoints &maskAndPoints = widgetsNeedingEvents[targetWidget];
         maskAndPoints.first |= touchPoint.state();
         maskAndPoints.second.append(touchPoint);
     }
diff --git a/src/widgets/kernel/qapplication.h b/src/widgets/kernel/qapplication.h
index e72fe29bdb..ceba0c96c4 100644
--- a/src/widgets/kernel/qapplication.h
+++ b/src/widgets/kernel/qapplication.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -228,7 +220,6 @@ private:
     friend class QWidget;
     friend class QWidgetPrivate;
     friend class QWidgetWindow;
-    friend class QETWidget;
     friend class QTranslator;
     friend class QWidgetAnimator;
 #ifndef QT_NO_SHORTCUT
diff --git a/src/widgets/kernel/qapplication_p.h b/src/widgets/kernel/qapplication_p.h
index 29142470a7..156bf34194 100644
--- a/src/widgets/kernel/qapplication_p.h
+++ b/src/widgets/kernel/qapplication_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qapplication_qpa.cpp b/src/widgets/kernel/qapplication_qpa.cpp
deleted file mode 100644
index 5893c52e1b..0000000000
--- a/src/widgets/kernel/qapplication_qpa.cpp
+++ /dev/null
@@ -1,493 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtWidgets module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qapplication_p.h"
-#include "qcolormap.h"
-#include "qpalette.h"
-#include "qpixmapcache.h"
-#ifndef QT_NO_CURSOR
-#include "private/qcursor_p.h"
-#endif
-#include "qscreen.h"
-
-#include "private/qwidget_p.h"
-#include "private/qevent_p.h"
-
-#include <qpa/qplatformintegrationfactory_p.h>
-#include <qdesktopwidget.h>
-#include <qpa/qplatformcursor.h>
-#include <qpa/qplatformtheme.h>
-#include <qpa/qplatformwindow.h>
-
-#include <qdebug.h>
-#include <qpa/qwindowsysteminterface.h>
-#include <qpa/qwindowsysteminterface_p.h>
-#include <qpa/qplatformintegration.h>
-
-#include "qdesktopwidget_qpa_p.h"
-#include "qwidgetwindow_qpa_p.h"
-#include "qtooltip.h"
-
-#ifdef Q_OS_WIN
-#  include <QtCore/qt_windows.h> // for qt_win_display_dc()
-#endif
-
-QT_BEGIN_NAMESPACE
-
-static QString appFont;
-static bool popupGrabOk;
-extern QWidget *qt_button_down;
-extern QWidget *qt_popup_down;
-extern bool qt_replay_popup_mouse_event;
-int openPopupCount = 0;
-extern QPointer<QWidget> qt_last_mouse_receiver;
-
-void QApplicationPrivate::createEventDispatcher()
-{
-    QGuiApplicationPrivate::createEventDispatcher();
-}
-
-bool qt_try_modal(QWidget *widget, QEvent::Type type)
-{
-    QWidget * top = 0;
-
-    if (QApplicationPrivate::tryModalHelper(widget, &top))
-        return true;
-
-    bool block_event  = false;
-
-    switch (type) {
-#if 0
-    case QEvent::Focus:
-        if (!static_cast<QWSFocusEvent*>(event)->simpleData.get_focus)
-            break;
-        // drop through
-#endif
-    case QEvent::MouseButtonPress:                        // disallow mouse/key events
-    case QEvent::MouseButtonRelease:
-    case QEvent::MouseMove:
-    case QEvent::KeyPress:
-    case QEvent::KeyRelease:
-        block_event         = true;
-        break;
-    default:
-        break;
-    }
-
-    if (block_event && top && top->parentWidget() == 0)
-        top->raise();
-
-    return !block_event;
-}
-
-bool QApplicationPrivate::modalState()
-{
-    return !self->modalWindowList.isEmpty();
-}
-
-QWidget *qt_tlw_for_window(QWindow *wnd)
-{
-    // QTBUG-32177, wnd might be a QQuickView embedded via window container.
-    while (wnd && !wnd->isTopLevel()) {
-        QWindow *parent = wnd->parent();
-        // Don't end up in windows not belonging to this application
-        if (parent && parent->type() != Qt::ForeignWindow)
-            wnd = wnd->parent();
-        else
-            break;
-    }
-    if (wnd)
-        foreach (QWidget *tlw, qApp->topLevelWidgets())
-            if (tlw->windowHandle() == wnd)
-                return tlw;
-    return 0;
-}
-
-void QApplicationPrivate::notifyActiveWindowChange(QWindow *previous)
-{
-    Q_UNUSED(previous);
-    QWindow *wnd = QGuiApplicationPrivate::focus_window;
-    if (inPopupMode()) // some delayed focus event to ignore
-        return;
-    QWidget *tlw = qt_tlw_for_window(wnd);
-    QApplication::setActiveWindow(tlw);
-}
-
-static void ungrabKeyboardForPopup(QWidget *popup)
-{
-    if (QWidget::keyboardGrabber())
-        qt_widget_private(QWidget::keyboardGrabber())->stealKeyboardGrab(true);
-    else
-        qt_widget_private(popup)->stealKeyboardGrab(false);
-}
-
-static void ungrabMouseForPopup(QWidget *popup)
-{
-    if (QWidget::mouseGrabber())
-        qt_widget_private(QWidget::mouseGrabber())->stealMouseGrab(true);
-    else
-        qt_widget_private(popup)->stealMouseGrab(false);
-}
-
-static void grabForPopup(QWidget *popup)
-{
-    Q_ASSERT(popup->testAttribute(Qt::WA_WState_Created));
-    popupGrabOk = qt_widget_private(popup)->stealKeyboardGrab(true);
-    if (popupGrabOk) {
-        popupGrabOk = qt_widget_private(popup)->stealMouseGrab(true);
-        if (!popupGrabOk) {
-            // transfer grab back to the keyboard grabber if any
-            ungrabKeyboardForPopup(popup);
-        }
-    }
-}
-
-void QApplicationPrivate::closePopup(QWidget *popup)
-{
-    if (!popupWidgets)
-        return;
-    popupWidgets->removeAll(popup);
-
-     if (popup == qt_popup_down) {
-         qt_button_down = 0;
-         qt_popup_down = 0;
-     }
-
-    if (QApplicationPrivate::popupWidgets->count() == 0) { // this was the last popup
-        delete QApplicationPrivate::popupWidgets;
-        QApplicationPrivate::popupWidgets = 0;
-
-        if (popupGrabOk) {
-            popupGrabOk = false;
-
-            if (popup->geometry().contains(QPoint(QGuiApplicationPrivate::mousePressX,
-                                                  QGuiApplicationPrivate::mousePressY))
-                || popup->testAttribute(Qt::WA_NoMouseReplay)) {
-                // mouse release event or inside
-                qt_replay_popup_mouse_event = false;
-            } else { // mouse press event
-                qt_replay_popup_mouse_event = true;
-            }
-
-            // transfer grab back to mouse grabber if any, otherwise release the grab
-            ungrabMouseForPopup(popup);
-
-            // transfer grab back to keyboard grabber if any, otherwise release the grab
-            ungrabKeyboardForPopup(popup);
-        }
-
-        if (active_window) {
-            if (QWidget *fw = active_window->focusWidget()) {
-                if (fw != QApplication::focusWidget()) {
-                    fw->setFocus(Qt::PopupFocusReason);
-                } else {
-                    QFocusEvent e(QEvent::FocusIn, Qt::PopupFocusReason);
-                    QCoreApplication::sendEvent(fw, &e);
-                }
-            }
-        }
-
-    } else {
-        // A popup was closed, so the previous popup gets the focus.
-        QWidget* aw = QApplicationPrivate::popupWidgets->last();
-        if (QWidget *fw = aw->focusWidget())
-            fw->setFocus(Qt::PopupFocusReason);
-
-        if (QApplicationPrivate::popupWidgets->count() == 1) // grab mouse/keyboard
-            grabForPopup(aw);
-    }
-
-}
-
-void QApplicationPrivate::openPopup(QWidget *popup)
-{
-    openPopupCount++;
-    if (!popupWidgets) // create list
-        popupWidgets = new QWidgetList;
-    popupWidgets->append(popup); // add to end of list
-
-    if (QApplicationPrivate::popupWidgets->count() == 1) // grab mouse/keyboard
-        grabForPopup(popup);
-
-    // popups are not focus-handled by the window system (the first
-    // popup grabbed the keyboard), so we have to do that manually: A
-    // new popup gets the focus
-    if (popup->focusWidget()) {
-        popup->focusWidget()->setFocus(Qt::PopupFocusReason);
-    } else if (popupWidgets->count() == 1) { // this was the first popup
-        if (QWidget *fw = QApplication::focusWidget()) {
-            QFocusEvent e(QEvent::FocusOut, Qt::PopupFocusReason);
-            QApplication::sendEvent(fw, &e);
-        }
-    }
-}
-
-void QApplicationPrivate::initializeMultitouch_sys()
-{
-}
-
-void QApplicationPrivate::cleanupMultitouch_sys()
-{
-}
-
-static void setPossiblePalette(const QPalette *palette, const char *className)
-{
-    if (palette == 0)
-        return;
-    QApplicationPrivate::setPalette_helper(*palette, className, false);
-}
-
-
-void QApplicationPrivate::initializeWidgetPaletteHash()
-{
-    QPlatformTheme *platformTheme = QGuiApplicationPrivate::platformTheme();
-    if (!platformTheme)
-        return;
-    qt_app_palettes_hash()->clear();
-
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::ToolButtonPalette), "QToolButton");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::ButtonPalette), "QAbstractButton");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::CheckBoxPalette), "QCheckBox");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::RadioButtonPalette), "QRadioButton");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::HeaderPalette), "QHeaderView");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::ItemViewPalette), "QAbstractItemView");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::MessageBoxLabelPalette), "QMessageBoxLabel");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::TabBarPalette), "QTabBar");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::LabelPalette), "QLabel");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::GroupBoxPalette), "QGroupBox");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::MenuPalette), "QMenu");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::MenuBarPalette), "QMenuBar");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::TextEditPalette), "QTextEdit");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::TextEditPalette), "QTextControl");
-    setPossiblePalette(platformTheme->palette(QPlatformTheme::TextLineEditPalette), "QLineEdit");
-}
-
-void QApplicationPrivate::initializeWidgetFontHash()
-{
-    const QPlatformTheme *theme = QGuiApplicationPrivate::platformTheme();
-    if (!theme)
-        return;
-    FontHash *fontHash = qt_app_fonts_hash();
-    fontHash->clear();
-
-    if (const QFont *font = theme->font(QPlatformTheme::MenuFont))
-        fontHash->insert(QByteArrayLiteral("QMenu"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::MenuBarFont))
-        fontHash->insert(QByteArrayLiteral("QMenuBar"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::MenuItemFont))
-        fontHash->insert(QByteArrayLiteral("QMenuItem"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::MessageBoxFont))
-        fontHash->insert(QByteArrayLiteral("QMessageBox"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::LabelFont))
-        fontHash->insert(QByteArrayLiteral("QLabel"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::TipLabelFont))
-        fontHash->insert(QByteArrayLiteral("QTipLabel"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::TitleBarFont))
-        fontHash->insert(QByteArrayLiteral("QTitleBar"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::StatusBarFont))
-        fontHash->insert(QByteArrayLiteral("QStatusBar"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::MdiSubWindowTitleFont))
-        fontHash->insert(QByteArrayLiteral("QMdiSubWindowTitleBar"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::DockWidgetTitleFont))
-        fontHash->insert(QByteArrayLiteral("QDockWidgetTitle"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::PushButtonFont))
-        fontHash->insert(QByteArrayLiteral("QPushButton"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::CheckBoxFont))
-        fontHash->insert(QByteArrayLiteral("QCheckBox"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::RadioButtonFont))
-        fontHash->insert(QByteArrayLiteral("QRadioButton"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::ToolButtonFont))
-        fontHash->insert(QByteArrayLiteral("QToolButton"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::ItemViewFont))
-        fontHash->insert(QByteArrayLiteral("QAbstractItemView"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::ListViewFont))
-        fontHash->insert(QByteArrayLiteral("QListViewFont"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::HeaderViewFont))
-        fontHash->insert(QByteArrayLiteral("QHeaderViewFont"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::ListBoxFont))
-        fontHash->insert(QByteArrayLiteral("QListBox"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::ComboMenuItemFont))
-        fontHash->insert(QByteArrayLiteral("QComboMenuItemFont"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::ComboLineEditFont))
-        fontHash->insert(QByteArrayLiteral("QComboLineEditFont"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::SmallFont))
-        fontHash->insert(QByteArrayLiteral("QSmallFont"), *font);
-    if (const QFont *font = theme->font(QPlatformTheme::MiniFont))
-        fontHash->insert(QByteArrayLiteral("QMiniFont"), *font);
-}
-
-#ifndef QT_NO_WHEELEVENT
-void QApplication::setWheelScrollLines(int lines)
-{
-    QApplicationPrivate::wheel_scroll_lines = lines;
-}
-
-int QApplication::wheelScrollLines()
-{
-    return QApplicationPrivate::wheel_scroll_lines;
-}
-#endif
-
-static inline int uiEffectToFlag(Qt::UIEffect effect)
-{
-    switch (effect) {
-    case Qt::UI_General:
-        return QPlatformTheme::GeneralUiEffect;
-    case Qt::UI_AnimateMenu:
-        return QPlatformTheme::AnimateMenuUiEffect;
-    case Qt::UI_FadeMenu:
-        return QPlatformTheme::FadeMenuUiEffect;
-    case Qt::UI_AnimateCombo:
-        return QPlatformTheme::AnimateComboUiEffect;
-    case Qt::UI_AnimateTooltip:
-        return QPlatformTheme::AnimateTooltipUiEffect;
-    case Qt::UI_FadeTooltip:
-        return QPlatformTheme::FadeTooltipUiEffect;
-    case Qt::UI_AnimateToolBox:
-        return QPlatformTheme::AnimateToolBoxUiEffect;
-    }
-    return 0;
-}
-
-void QApplication::setEffectEnabled(Qt::UIEffect effect, bool enable)
-{
-    int effectFlags = uiEffectToFlag(effect);
-    if (enable) {
-        if (effectFlags & QPlatformTheme::FadeMenuUiEffect)
-            effectFlags |= QPlatformTheme::AnimateMenuUiEffect;
-        if (effectFlags & QPlatformTheme::FadeTooltipUiEffect)
-            effectFlags |= QPlatformTheme::AnimateTooltipUiEffect;
-        QApplicationPrivate::enabledAnimations |= effectFlags;
-    } else {
-        QApplicationPrivate::enabledAnimations &= ~effectFlags;
-    }
-}
-
-bool QApplication::isEffectEnabled(Qt::UIEffect effect)
-{
-    return QColormap::instance().depth() >= 16
-           && (QApplicationPrivate::enabledAnimations & QPlatformTheme::GeneralUiEffect)
-           && (QApplicationPrivate::enabledAnimations & uiEffectToFlag(effect));
-}
-
-QWidget *QApplication::topLevelAt(const QPoint &pos)
-{
-    QList<QScreen *> screens = QGuiApplication::screens();
-    QList<QScreen *>::const_iterator screen = screens.constBegin();
-    QList<QScreen *>::const_iterator end = screens.constEnd();
-
-    while (screen != end) {
-        if ((*screen)->geometry().contains(pos)) {
-            QWidgetWindow *w = qobject_cast<QWidgetWindow *>((*screen)->handle()->topLevelAt(pos));
-            return w ? w->widget() : 0;
-        }
-        ++screen;
-    }
-    return 0;
-}
-
-void QApplication::beep()
-{
-    QMetaObject::invokeMethod(QGuiApplication::platformNativeInterface(), "beep");
-}
-
-void QApplication::alert(QWidget *widget, int duration)
-{
-    if (widget) {
-       if (widget->window()->isActiveWindow() && !(widget->window()->windowState() & Qt::WindowMinimized))
-            return;
-        if (QWindow *window= QApplicationPrivate::windowForWidget(widget))
-            window->alert(duration);
-    } else {
-        foreach (QWidget *topLevel, topLevelWidgets())
-            QApplication::alert(topLevel, duration);
-    }
-}
-
-void qt_init_tooltip_palette()
-{
-#ifndef QT_NO_TOOLTIP
-    if (const QPalette *toolTipPalette = QGuiApplicationPrivate::platformTheme()->palette(QPlatformTheme::ToolTipPalette))
-        QToolTip::setPalette(*toolTipPalette);
-#endif
-}
-
-void qt_init(QApplicationPrivate *priv, int type)
-{
-    Q_UNUSED(priv);
-    Q_UNUSED(type);
-
-    QColormap::initialize();
-
-    qt_init_tooltip_palette();
-
-    QApplicationPrivate::initializeWidgetFontHash();
-}
-
-#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
-// #fixme: Remove.
-static HDC         displayDC        = 0;                // display device context
-
-Q_WIDGETS_EXPORT HDC qt_win_display_dc()                        // get display DC
-{
-    Q_ASSERT(qApp && qApp->thread() == QThread::currentThread());
-    if (!displayDC)
-        displayDC = GetDC(0);
-    return displayDC;
-}
-#endif
-
-void qt_cleanup()
-{
-    QPixmapCache::clear();
-    QColormap::cleanup();
-
-    QApplicationPrivate::active_window = 0; //### this should not be necessary
-#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
-    if (displayDC) {
-        ReleaseDC(0, displayDC);
-        displayDC = 0;
-    }
-#endif
-}
-
-
-QT_END_NAMESPACE
diff --git a/src/widgets/kernel/qboxlayout.cpp b/src/widgets/kernel/qboxlayout.cpp
index a186326551..631d3394dd 100644
--- a/src/widgets/kernel/qboxlayout.cpp
+++ b/src/widgets/kernel/qboxlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qboxlayout.h b/src/widgets/kernel/qboxlayout.h
index 4c7b27a4ec..c2da23f34c 100644
--- a/src/widgets/kernel/qboxlayout.h
+++ b/src/widgets/kernel/qboxlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qdesktopwidget.cpp b/src/widgets/kernel/qdesktopwidget.cpp
index 649978a912..67264133ef 100644
--- a/src/widgets/kernel/qdesktopwidget.cpp
+++ b/src/widgets/kernel/qdesktopwidget.cpp
@@ -1,46 +1,40 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "qglobal.h"
 #include "qdesktopwidget.h"
+#include "qdesktopwidget_p.h"
+#include "qscreen.h"
 #include "qwidget_p.h"
 
 QT_BEGIN_NAMESPACE
@@ -72,5 +66,152 @@ const QRect QDesktopWidget::availableGeometry(const QWidget *widget) const
         return rect;
 }
 
+void QDesktopWidgetPrivate::_q_updateScreens()
+{
+    Q_Q(QDesktopWidget);
+    const QList<QScreen *> screenList = QGuiApplication::screens();
+    const int targetLength = screenList.length();
+    const int oldLength = screens.length();
+    int currentLength = oldLength;
+
+    // Add or remove screen widgets as necessary
+    if(currentLength > targetLength) {
+        QDesktopScreenWidget *screen;
+        while (currentLength-- > targetLength) {
+            screen = screens.takeLast();
+            delete screen;
+        }
+    }
+    else if (currentLength < targetLength) {
+        while (currentLength < targetLength) {
+            QScreen *qScreen = screenList.at(currentLength);
+            QDesktopScreenWidget *screenWidget = new QDesktopScreenWidget(currentLength++);
+            screenWidget->setGeometry(qScreen->geometry());
+            QObject::connect(qScreen, SIGNAL(geometryChanged(QRect)),
+                             q, SLOT(_q_updateScreens()), Qt::QueuedConnection);
+            QObject::connect(qScreen, SIGNAL(availableGeometryChanged(QRect)),
+                             q, SLOT(_q_availableGeometryChanged()), Qt::QueuedConnection);
+            QObject::connect(qScreen, SIGNAL(destroyed()),
+                             q, SLOT(_q_updateScreens()), Qt::QueuedConnection);
+            screens.append(screenWidget);
+        }
+    }
+
+    QRegion virtualGeometry;
+
+    // update the geometry of each screen widget, determine virtual geometry
+    // and emit change signals afterwards.
+    QList<int> changedScreens;
+    for (int i = 0; i < screens.length(); i++) {
+        const QRect screenGeometry = screenList.at(i)->geometry();
+        if (screenGeometry != screens.at(i)->geometry()) {
+            screens.at(i)->setGeometry(screenGeometry);
+            changedScreens.push_back(i);
+        }
+        virtualGeometry += screenGeometry;
+    }
+
+    q->setGeometry(virtualGeometry.boundingRect());
+
+    if (oldLength != targetLength)
+        emit q->screenCountChanged(targetLength);
+
+    foreach (int changedScreen, changedScreens)
+        emit q->resized(changedScreen);
+}
+
+void QDesktopWidgetPrivate::_q_availableGeometryChanged()
+{
+    Q_Q(QDesktopWidget);
+    if (QScreen *screen = qobject_cast<QScreen *>(q->sender()))
+        emit q->workAreaResized(QGuiApplication::screens().indexOf(screen));
+}
+
+QDesktopWidget::QDesktopWidget()
+    : QWidget(*new QDesktopWidgetPrivate, 0, Qt::Desktop)
+{
+    Q_D(QDesktopWidget);
+    setObjectName(QLatin1String("desktop"));
+    d->_q_updateScreens();
+    connect(qApp, SIGNAL(screenAdded(QScreen*)), this, SLOT(_q_updateScreens()));
+}
+
+QDesktopWidget::~QDesktopWidget()
+{
+}
+
+bool QDesktopWidget::isVirtualDesktop() const
+{
+    return QGuiApplication::primaryScreen()->virtualSiblings().size() > 1;
+}
+
+int QDesktopWidget::primaryScreen() const
+{
+    return 0;
+}
+
+int QDesktopWidget::numScreens() const
+{
+    return qMax(QGuiApplication::screens().size(), 1);
+}
+
+QWidget *QDesktopWidget::screen(int screen)
+{
+    Q_D(QDesktopWidget);
+    if (screen < 0 || screen >= d->screens.length())
+        return d->screens.at(0);
+    return d->screens.at(screen);
+}
+
+const QRect QDesktopWidget::availableGeometry(int screenNo) const
+{
+    QList<QScreen *> screens = QGuiApplication::screens();
+    if (screenNo == -1)
+        screenNo = 0;
+    if (screenNo < 0 || screenNo >= screens.size())
+        return QRect();
+    else
+        return screens.at(screenNo)->availableGeometry();
+}
+
+const QRect QDesktopWidget::screenGeometry(int screenNo) const
+{
+    QList<QScreen *> screens = QGuiApplication::screens();
+    if (screenNo == -1)
+        screenNo = 0;
+    if (screenNo < 0 || screenNo >= screens.size())
+        return QRect();
+    else
+        return screens.at(screenNo)->geometry();
+}
+
+int QDesktopWidget::screenNumber(const QWidget *w) const
+{
+    if (!w)
+        return 0;
+
+    QRect frame = w->frameGeometry();
+    if (!w->isWindow())
+        frame.moveTopLeft(w->mapToGlobal(QPoint(0, 0)));
+    const QPoint midpoint = (frame.topLeft() + frame.bottomRight()) / 2;
+    return screenNumber(midpoint);
+}
+
+int QDesktopWidget::screenNumber(const QPoint &p) const
+{
+    QList<QScreen *> screens = QGuiApplication::screens();
+
+    for (int i = 0; i < screens.size(); ++i)
+        if (screens.at(i)->geometry().contains(p))
+            return i;
+
+    return primaryScreen(); //even better would be closest screen
+}
+
+void QDesktopWidget::resizeEvent(QResizeEvent *)
+{
+}
+
 QT_END_NAMESPACE
 
+#include "moc_qdesktopwidget.cpp"
diff --git a/src/widgets/kernel/qdesktopwidget.h b/src/widgets/kernel/qdesktopwidget.h
index 42c338f696..e8ce49503b 100644
--- a/src/widgets/kernel/qdesktopwidget.h
+++ b/src/widgets/kernel/qdesktopwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -93,6 +85,7 @@ private:
     Q_DISABLE_COPY(QDesktopWidget)
     Q_DECLARE_PRIVATE(QDesktopWidget)
     Q_PRIVATE_SLOT(d_func(), void _q_updateScreens())
+    Q_PRIVATE_SLOT(d_func(), void _q_availableGeometryChanged())
 
     friend class QApplication;
     friend class QApplicationPrivate;
diff --git a/src/widgets/kernel/qdesktopwidget_qpa_p.h b/src/widgets/kernel/qdesktopwidget_p.h
index f461869f1b..62f4d8ed6f 100644
--- a/src/widgets/kernel/qdesktopwidget_qpa_p.h
+++ b/src/widgets/kernel/qdesktopwidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -50,8 +42,8 @@
 // We mean it.
 //
 
-#ifndef QDESKTOPWIDGET_QPA_P_H
-#define QDESKTOPWIDGET_QPA_P_H
+#ifndef QDESKTOPWIDGET_P_H
+#define QDESKTOPWIDGET_P_H
 
 #include "QDesktopWidget"
 #include "private/qwidget_p.h"
@@ -75,6 +67,7 @@ class QDesktopWidgetPrivate : public QWidgetPrivate {
 public:
     ~QDesktopWidgetPrivate() {foreach(QDesktopScreenWidget *s, screens) delete s; }
     void _q_updateScreens();
+    void _q_availableGeometryChanged();
 
     QList<QDesktopScreenWidget *> screens;
 };
diff --git a/src/widgets/kernel/qdesktopwidget_qpa.cpp b/src/widgets/kernel/qdesktopwidget_qpa.cpp
deleted file mode 100644
index 015573dfbe..0000000000
--- a/src/widgets/kernel/qdesktopwidget_qpa.cpp
+++ /dev/null
@@ -1,193 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtWidgets module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qdesktopwidget.h"
-#include "qscreen.h"
-#include "private/qapplication_p.h"
-#include <QWidget>
-#include "private/qwidget_p.h"
-#include "private/qdesktopwidget_qpa_p.h"
-QT_BEGIN_NAMESPACE
-
-QT_USE_NAMESPACE
-
-void QDesktopWidgetPrivate::_q_updateScreens()
-{
-    Q_Q(QDesktopWidget);
-    const QList<QScreen *> screenList = QGuiApplication::screens();
-    const int targetLength = screenList.length();
-    const int oldLength = screens.length();
-    int currentLength = oldLength;
-
-    // Add or remove screen widgets as necessary
-    if(currentLength > targetLength) {
-        QDesktopScreenWidget *screen;
-        while (currentLength-- > targetLength) {
-            screen = screens.takeLast();
-            delete screen;
-        }
-    }
-    else if (currentLength < targetLength) {
-        while (currentLength < targetLength) {
-            QScreen *qScreen = screenList.at(currentLength);
-            QDesktopScreenWidget *screenWidget = new QDesktopScreenWidget(currentLength++);
-            screenWidget->setGeometry(qScreen->geometry());
-            QObject::connect(qScreen, SIGNAL(geometryChanged(QRect)),
-                             q, SLOT(_q_updateScreens()), Qt::QueuedConnection);
-            QObject::connect(qScreen, SIGNAL(destroyed()),
-                             q, SLOT(_q_updateScreens()), Qt::QueuedConnection);
-            screens.append(screenWidget);
-        }
-    }
-
-    QRegion virtualGeometry;
-
-    // update the geometry of each screen widget, determine virtual geometry
-    // and emit change signals afterwards.
-    QList<int> changedScreens;
-    for (int i = 0; i < screens.length(); i++) {
-        const QRect screenGeometry = screenList.at(i)->geometry();
-        if (screenGeometry != screens.at(i)->geometry()) {
-            screens.at(i)->setGeometry(screenGeometry);
-            changedScreens.push_back(i);
-        }
-        virtualGeometry += screenGeometry;
-    }
-
-    q->setGeometry(virtualGeometry.boundingRect());
-
-    if (oldLength != targetLength)
-        emit q->screenCountChanged(targetLength);
-
-    foreach (int changedScreen, changedScreens) {
-        emit q->resized(changedScreen);
-        emit q->workAreaResized(changedScreen);
-    }
-}
-
-QDesktopWidget::QDesktopWidget()
-    : QWidget(*new QDesktopWidgetPrivate, 0, Qt::Desktop)
-{
-    Q_D(QDesktopWidget);
-    setObjectName(QLatin1String("desktop"));
-    d->_q_updateScreens();
-    connect(qApp, SIGNAL(screenAdded(QScreen*)), this, SLOT(_q_updateScreens()));
-}
-
-QDesktopWidget::~QDesktopWidget()
-{
-}
-
-bool QDesktopWidget::isVirtualDesktop() const
-{
-    return QGuiApplication::primaryScreen()->virtualSiblings().size() > 1;
-}
-
-int QDesktopWidget::primaryScreen() const
-{
-    return 0;
-}
-
-int QDesktopWidget::numScreens() const
-{
-    return qMax(QGuiApplication::screens().size(), 1);
-}
-
-QWidget *QDesktopWidget::screen(int screen)
-{
-    Q_D(QDesktopWidget);
-    if (screen < 0 || screen >= d->screens.length())
-        return d->screens.at(0);
-    return d->screens.at(screen);
-}
-
-const QRect QDesktopWidget::availableGeometry(int screenNo) const
-{
-    QList<QScreen *> screens = QGuiApplication::screens();
-    if (screenNo == -1)
-        screenNo = 0;
-    if (screenNo < 0 || screenNo >= screens.size())
-        return QRect();
-    else
-        return screens.at(screenNo)->availableGeometry();
-}
-
-const QRect QDesktopWidget::screenGeometry(int screenNo) const
-{
-    QList<QScreen *> screens = QGuiApplication::screens();
-    if (screenNo == -1)
-        screenNo = 0;
-    if (screenNo < 0 || screenNo >= screens.size())
-        return QRect();
-    else
-        return screens.at(screenNo)->geometry();
-}
-
-int QDesktopWidget::screenNumber(const QWidget *w) const
-{
-    if (!w)
-        return 0;
-
-    QRect frame = w->frameGeometry();
-    if (!w->isWindow())
-        frame.moveTopLeft(w->mapToGlobal(QPoint(0, 0)));
-    const QPoint midpoint = (frame.topLeft() + frame.bottomRight()) / 2;
-    return screenNumber(midpoint);
-}
-
-int QDesktopWidget::screenNumber(const QPoint &p) const
-{
-    QList<QScreen *> screens = QGuiApplication::screens();
-
-    for (int i = 0; i < screens.size(); ++i)
-        if (screens.at(i)->geometry().contains(p))
-            return i;
-
-    return primaryScreen(); //even better would be closest screen
-}
-
-void QDesktopWidget::resizeEvent(QResizeEvent *)
-{
-}
-
-QT_END_NAMESPACE
-
-#include "moc_qdesktopwidget.cpp"
diff --git a/src/widgets/kernel/qformlayout.cpp b/src/widgets/kernel/qformlayout.cpp
index 9f545b858a..b77082b7f4 100644
--- a/src/widgets/kernel/qformlayout.cpp
+++ b/src/widgets/kernel/qformlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qformlayout.h b/src/widgets/kernel/qformlayout.h
index 0b8fd65a3f..06100f858f 100644
--- a/src/widgets/kernel/qformlayout.h
+++ b/src/widgets/kernel/qformlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgesture.cpp b/src/widgets/kernel/qgesture.cpp
index f475642f78..2b8f04ccdf 100644
--- a/src/widgets/kernel/qgesture.cpp
+++ b/src/widgets/kernel/qgesture.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgesture.h b/src/widgets/kernel/qgesture.h
index 056fc35402..9e3ee64c87 100644
--- a/src/widgets/kernel/qgesture.h
+++ b/src/widgets/kernel/qgesture.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgesture_p.h b/src/widgets/kernel/qgesture_p.h
index ae203d2819..8668145d8a 100644
--- a/src/widgets/kernel/qgesture_p.h
+++ b/src/widgets/kernel/qgesture_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgesturemanager.cpp b/src/widgets/kernel/qgesturemanager.cpp
index 929e5e2fcf..739e6b1870 100644
--- a/src/widgets/kernel/qgesturemanager.cpp
+++ b/src/widgets/kernel/qgesturemanager.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -46,7 +38,7 @@
 #include "private/qgraphicsitem_p.h"
 #include "private/qevent_p.h"
 #include "private/qapplication_p.h"
-#include "private/qwidgetwindow_qpa_p.h"
+#include "private/qwidgetwindow_p.h"
 #include "qgesture.h"
 #include "qevent.h"
 #include "qgraphicsitem.h"
diff --git a/src/widgets/kernel/qgesturemanager_p.h b/src/widgets/kernel/qgesturemanager_p.h
index 6264b5a25d..6b27f41fc2 100644
--- a/src/widgets/kernel/qgesturemanager_p.h
+++ b/src/widgets/kernel/qgesturemanager_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgesturerecognizer.cpp b/src/widgets/kernel/qgesturerecognizer.cpp
index 88983e255b..084b110f41 100644
--- a/src/widgets/kernel/qgesturerecognizer.cpp
+++ b/src/widgets/kernel/qgesturerecognizer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgesturerecognizer.h b/src/widgets/kernel/qgesturerecognizer.h
index a1ce86b50d..ff42b7f7a9 100644
--- a/src/widgets/kernel/qgesturerecognizer.h
+++ b/src/widgets/kernel/qgesturerecognizer.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgridlayout.cpp b/src/widgets/kernel/qgridlayout.cpp
index 6782e4a9f8..10d338c40c 100644
--- a/src/widgets/kernel/qgridlayout.cpp
+++ b/src/widgets/kernel/qgridlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qgridlayout.h b/src/widgets/kernel/qgridlayout.h
index 6a788d9cc8..95d8a0a445 100644
--- a/src/widgets/kernel/qgridlayout.h
+++ b/src/widgets/kernel/qgridlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayout.cpp b/src/widgets/kernel/qlayout.cpp
index 778514f47a..3900444df4 100644
--- a/src/widgets/kernel/qlayout.cpp
+++ b/src/widgets/kernel/qlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayout.h b/src/widgets/kernel/qlayout.h
index 27d9d34b9c..38568e434c 100644
--- a/src/widgets/kernel/qlayout.h
+++ b/src/widgets/kernel/qlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayout_p.h b/src/widgets/kernel/qlayout_p.h
index 71e0f9bcd3..4d6e0c76ad 100644
--- a/src/widgets/kernel/qlayout_p.h
+++ b/src/widgets/kernel/qlayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayoutengine.cpp b/src/widgets/kernel/qlayoutengine.cpp
index fe27edd35d..a134d3a3ef 100644
--- a/src/widgets/kernel/qlayoutengine.cpp
+++ b/src/widgets/kernel/qlayoutengine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayoutengine_p.h b/src/widgets/kernel/qlayoutengine_p.h
index 8a26b389df..98bfa9c4a7 100644
--- a/src/widgets/kernel/qlayoutengine_p.h
+++ b/src/widgets/kernel/qlayoutengine_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayoutitem.cpp b/src/widgets/kernel/qlayoutitem.cpp
index 259af8a5e8..e30e1f0724 100644
--- a/src/widgets/kernel/qlayoutitem.cpp
+++ b/src/widgets/kernel/qlayoutitem.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qlayoutitem.h b/src/widgets/kernel/qlayoutitem.h
index 4af57f1458..c5137b3fb8 100644
--- a/src/widgets/kernel/qlayoutitem.h
+++ b/src/widgets/kernel/qlayoutitem.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qmacgesturerecognizer.cpp b/src/widgets/kernel/qmacgesturerecognizer.cpp
index feb779e53f..3b88eb6054 100644
--- a/src/widgets/kernel/qmacgesturerecognizer.cpp
+++ b/src/widgets/kernel/qmacgesturerecognizer.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qmacgesturerecognizer_p.h b/src/widgets/kernel/qmacgesturerecognizer_p.h
index 02f836b3f7..86a0dc3d3a 100644
--- a/src/widgets/kernel/qmacgesturerecognizer_p.h
+++ b/src/widgets/kernel/qmacgesturerecognizer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qopenglwidget.cpp b/src/widgets/kernel/qopenglwidget.cpp
index 307d0bb909..543f59d7d1 100644
--- a/src/widgets/kernel/qopenglwidget.cpp
+++ b/src/widgets/kernel/qopenglwidget.cpp
@@ -1,184 +1,1091 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-#include "qopenglwidget_p.h"
-#include <QOpenGLContext>
-#include <QtWidgets/private/qwidget_p.h>
-
-#include <QOpenGLFramebufferObject>
-#include <QOpenGLFunctions>
-#include <QWindow>
-#include <qpa/qplatformwindow.h>
-#include <QDebug>
+#include "qopenglwidget.h"
+#include <QtGui/QOpenGLContext>
+#include <QtGui/QOpenGLFramebufferObject>
+#include <QtGui/QOffscreenSurface>
+#include <QtGui/QOpenGLFunctions>
+#include <QtGui/QWindow>
 #include <QtGui/QGuiApplication>
 #include <QtGui/QScreen>
+#include <QtGui/QOpenGLPaintDevice>
+#include <QtGui/qpa/qplatformwindow.h>
+#include <QtGui/qpa/qplatformintegration.h>
+#include <QtGui/private/qguiapplication_p.h>
+#include <QtGui/private/qopenglextensions_p.h>
+#include <QtGui/private/qfont_p.h>
+#include <QtWidgets/private/qwidget_p.h>
 
 QT_BEGIN_NAMESPACE
 
+/*!
+  \class QOpenGLWidget
+  \inmodule QtWidgets
+  \since 5.4
+
+  \brief The QOpenGLWidget class is a widget for rendering OpenGL graphics.
+
+  QOpenGLWidget provides functionality for displaying OpenGL graphics
+  integrated into a Qt application. It is very simple to use: Make
+  your class inherit from it and use the subclass like any other
+  QWidget, except that you have the choice between using QPainter and
+  standard OpenGL rendering commands.
+
+  QOpenGLWidget provides three convenient virtual functions that you
+  can reimplement in your subclass to perform the typical OpenGL
+  tasks:
+
+  \list
+  \li paintGL() - Renders the OpenGL scene. Gets called whenever the widget
+  needs to be updated.
+  \li resizeGL() - Sets up the OpenGL viewport, projection, etc. Gets
+  called whenever the widget has been resized (and also when it
+  is shown for the first time because all newly created widgets get a
+  resize event automatically).
+  \li initializeGL() - Sets up the OpenGL resources and state. Gets called
+  once before the first time resizeGL() or paintGL() is called.
+  \endlist
+
+  If you need to trigger a repaint from places other than paintGL() (a
+  typical example is when using \l{QTimer}{timers} to animate scenes),
+  you should call the widget's update() function to schedule an update.
+
+  Your widget's OpenGL rendering context is made current when
+  paintGL(), resizeGL(), or initializeGL() is called. If you need to
+  call the standard OpenGL API functions from other places (e.g. in
+  your widget's constructor or in your own paint functions), you
+  must call makeCurrent() first.
+
+  All rendering happens into an OpenGL framebuffer
+  object. makeCurrent() ensure that it is bound in the context. Keep
+  this in mind when creating and binding additional framebuffer
+  objects in the rendering code in paintGL(). Never re-bind the
+  framebuffer with ID 0. Instead, call defaultFramebufferObject() to
+  get the ID that should be bound.
+
+  QOpenGLWidget allows using different OpenGL versions and profiles
+  when the platform supports it. Just set the requested format via
+  setFormat(). Keep in mind however that having multiple QOpenGLWidget
+  instances in the same window requires that they all use the same
+  format, or at least formats that do not make the contexts
+  non-sharable. To overcome this issue, prefer using
+  QSurfaceFormat::setDefaultFormat() instead of setFormat().
+
+  \section1 Painting Techniques
+
+  As described above, subclass QOpenGLWidget to render pure 3D content in the
+  following way:
+
+  \list
+
+  \li Reimplement the initializeGL() and resizeGL() functions to
+  set up the OpenGL state and provide a perspective transformation.
+
+  \li Reimplement paintGL() to paint the 3D scene, calling only
+  OpenGL functions.
+
+  \endlist
+
+  It is also possible to draw 2D graphics onto a QOpenGLWidget subclass using QPainter:
+
+  \list
+
+  \li In paintGL(), instead of issuing OpenGL commands, construct a QPainter
+      object for use on the widget.
+
+  \li Draw primitives using QPainter's member functions.
+
+  \li Direct OpenGL commands can still be issued. However, you must make sure
+  these are enclosed by a call to the painter's beginNativePainting() and
+  endNativePainting().
+
+  \endlist
+
+  When performing drawing using QPainter only, it is also possible to perform
+  the painting like it is done for ordinary widgets: by reimplementing paintEvent().
+
+  \list
+
+  \li Reimplement the paintEvent() function.
+
+  \li Construct a QPainter object targeting the widget. Either pass the widget to the
+  constructor or the QPainter::begin() function.
+
+  \li Draw primitives using QPainter's member functions.
+
+  \li Painting finishes then the QPainter instance is destroyed. Alternatively,
+  call QPainter::end() explicitly.
+
+  \endlist
+
+  \section1 OpenGL Function Calls, Headers and QOpenGLFunctions
+
+  When making OpenGL function calls, it is strongly recommended to avoid calling
+  the functions directly. Instead, prefer using QOpenGLFunctions (when making
+  portable applications) or the versioned variants (for example,
+  QOpenGLFunctions_3_2_Core and similar, when targeting modern, desktop-only
+  OpenGL). This way the application will work correctly in all Qt build
+  configurations, including the ones that perform dynamic OpenGL implementation
+  loading which means applications are not directly linking to an GL
+  implementation and thus direct function calls are not feasible.
+
+  In paintGL() the current context is always accessible by caling
+  QOpenGLContext::currentContext(). From this context an already initialized,
+  ready-to-be-used QOpenGLFunctions instance is retrievable by calling
+  QOpenGLContext::functions(). An alternative to prefixing every GL call is to
+  inherit from QOpenGLFunctions and call
+  QOpenGLFunctions::initializeOpenGLFunctions() in initializeGL().
+
+  As for the OpenGL headers, note that in most cases there will be no need to
+  directly include any headers like GL.h. The OpenGL-related Qt headers will
+  include qopengl.h which will in turn include an appropriate header for the
+  system. This might be an OpenGL ES 3.x or 2.0 header, the highest version that
+  is available, or a system-provided gl.h. In addition, a copy of the extension
+  headers (called glext.h on some systems) is provided as part of Qt both for
+  OpenGL and OpenGL ES. These will get included automatically on platforms where
+  feasible. This means that constants and function pointer typedefs from ARB,
+  EXT, OES extensions are automatically available.
+
+  \section1 Code Examples
+
+  To get started, the simplest QOpenGLWidget subclass could like like the following:
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 0
+
+  Alternatively, the prefixing of each and every OpenGL call can be avoided by deriving
+  from QOpenGLFunctions instead:
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 1
+
+  To get a context compatible with a given OpenGL version or profile, or to
+  request depth and stencil buffers, call setFormat():
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 2
+
+  With OpenGL 3.0+ contexts, when portability is not important, the versioned
+  QOpenGLFunctions variants give easy access to all the modern OpenGL functions
+  available in a given version:
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 3
+
+  As described above, it is simpler and more robust to set the requested format
+  globally so that it applies to all windows and contexts during the lifetime of
+  the application. Below is an example of this:
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 6
+
+  \section1 Relation to QGLWidget
+
+  The legacy QtOpenGL module (classes prefixed with QGL) provides a widget
+  called QGLWidget. QOpenGLWidget is intended to be a modern replacement for
+  it. Therefore, especially in new applications, the general recommendation is
+  to use QOpenGLWidget.
+
+  While the API is very similar, there is an important difference between the
+  two: QOpenGLWidget always renders offscreen, using framebuffer
+  objects. QGLWidget on the other hand uses a native window and surface. The
+  latter causes issues when using it in complex user interfaces since, depending
+  on the platform, such native child widgets may have various limitations,
+  regarding stacking orders for example. QOpenGLWidget avoids this by not
+  creating a separate native window.
+
+  Due to being backed by a framebuffer object, the behavior of QOpenGLWidget is
+  very similar to QOpenGLWindow with the update behavior set to \c
+  PartialUpdateBlit or \c PartialUpdateBlend. This means that the contents are
+  preserved between paintGL() calls so that incremental rendering is
+  possible. With QGLWidget (and naturally QOpenGLWindow with the default update
+  behavior) this is usually not the case because swapping the buffers leaves the
+  back buffer with undefined contents.
+
+  \note Most applications do not need incremental rendering because they will
+  render everything in the view on every paint call. In this case it is
+  important to call glClear() as early as possible in paintGL(). This helps
+  mobile GPUs that use a tile-based architecture to recognize that the tile
+  buffer does not need to be reloaded with the framebuffer's previous
+  contents. Omitting the clear call can lead to significant performance drops on
+  such systems.
+
+  \note Avoid calling winId() on a QOpenGLWidget. This function triggers the creation of
+  a native window, resulting in reduced performance and possibly rendering glitches.
+
+  \section1 Multisampling
+
+  To enable multisampling, set the number of requested samples on the
+  QSurfaceFormat that is passed to setFormat(). On systems that do not support
+  it the request may get ignored.
+
+  Multisampling support requires support for multisampled renderbuffers and
+  framebuffer blits. On OpenGL ES 2.0 implementations it is likely that these
+  will not be present. This means that multisampling will not be available. With
+  modern OpenGL versions and OpenGL ES 3.0 and up this is usually not a problem
+  anymore.
+
+  \section1 Threading
+
+  Performing offscreen rendering on worker threads, for example to generate
+  textures that are then used in the GUI/main thread in paintGL(), are supported
+  by exposing the widget's QOpenGLContext so that additional contexts sharing
+  with it can be created on each thread.
+
+  Drawing directly to the QOpenGLWidget's framebuffer outside the GUI/main
+  thread is possible by reimplementing paintEvent() to do nothing. The context's
+  thread affinity has to be changed via QObject::moveToThread(). After that,
+  makeCurrent() and doneCurrent() are usable on the worker thread. Be careful to
+  move the context back to the GUI/main thread afterwards.
+
+  Unlike QGLWidget, triggering a buffer swap just for the QOpenGLWidget is not
+  possible since there is no real, onscreen native surface for it. Instead, it
+  is up to the widget stack to manage composition and buffer swaps on the gui
+  thread. When a thread is done updating the framebuffer, call update() \b{on
+  the GUI/main thread} to schedule composition.
+
+  Extra care has to be taken to avoid using the framebuffer when the GUI/main
+  thread is performing compositing. The signals aboutToCompose() and
+  frameSwapped() will be emitted when the composition is starting and
+  ending. They are emitted on the GUI/main thread. This means that by using a
+  direct connection aboutToCompose() can block the GUI/main thread until the
+  worker thread has finished its rendering. After that, the worker thread must
+  perform no further rendering until the frameSwapped() signal is emitted. If
+  this is not acceptable, the worker thread has to implement a double buffering
+  mechanism. This involves drawing using an alternative render target, that is
+  fully controlled by the thread, e.g. an additional framebuffer object, and
+  blitting to the QOpenGLWidget's framebuffer at a suitable time.
+
+  \section1 Context Sharing
+
+  When multiple QOpenGLWidgets are added as children to the same top-level
+  widget, their contexts will share with each other. This does not apply for
+  QOpenGLWidget instances that belong to different windows.
+
+  This means that all QOpenGLWidgets in the same window can access each other's
+  sharable resources, like textures, and there is no need for an extra "global
+  share" context, as was the case with QGLWidget.
+
+  To set up sharing between QOpenGLWidget instances belonging to different
+  windows, set the Qt::AA_ShareOpenGLContexts application attribute before
+  instantiating QApplication. This will trigger sharing between all
+  QOpenGLWidget instances without any further steps.
+
+  Creating extra QOpenGLContext instances that share resources like textures
+  with the QOpenGLWidget's context is also possible. Simply pass the pointer
+  returned from context() to QOpenGLContext::setShareContext() before calling
+  QOpenGLContext::create(). The resulting context can also be used on a
+  different thread, allowing threaded generation of textures and asynchronous
+  texture uploads.
+
+  Note that QOpenGLWidget expects a standard conformant implementation of
+  resource sharing when it comes to the underlying graphics drivers. For
+  example, some drivers, in particular for mobile and embedded hardware, have
+  issues with setting up sharing between an existing context and others that are
+  created later. Some other drivers may behave in unexpected ways when trying to
+  utilize shared resources between different threads.
+
+  \section1 Resource Initialization and Cleanup
+
+  The QOpenGLWidget's associated OpenGL context is guaranteed to be current
+  whenever initializeGL() and paintGL() are invoked. Do not attempt to create
+  OpenGL resources before initializeGL() is called. For example, attempting to
+  compile shaders, initialize vertex buffer objects or upload texture data will
+  fail when done in a subclass's constructor. These operations must be deferred
+  to initializeGL(). Some of Qt's OpenGL helper classes, like QOpenGLBuffer or
+  QOpenGLVertexArrayObject, have a matching deferred behavior: they can be
+  instantiated without a context, but all initialization is deferred until a
+  create(), or similar, call. This means that they can be used as normal
+  (non-pointer) member variables in a QOpenGLWidget subclass, but the create()
+  or similar function can only be called from initializeGL(). Be aware however
+  that not all classes are designed like this. When in doubt, make the member
+  variable a pointer and create and destroy the instance dynamically in
+  initializeGL() and the destructor, respectively.
+
+  Releasing the resources also needs the context to be current. Therefore
+  destructors that perform such cleanup are expected to call makeCurrent()
+  before moving on to destroy any OpenGL resources or wrappers. Avoid deferred
+  deletion via \l{QObject::deleteLater()}{deleteLater()} or the parenting
+  mechanism of QObject. There is no guarantee the correct context will be
+  current at the time the instance in question is really destroyed.
+
+  A typical subclass will therefore often look like the following when it comes
+  to resource initialization and destruction:
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 4
+
+  This is naturally not the only possible solution. One alternative is to use
+  the \l{QOpenGLContext::aboutToBeDestroyed()}{aboutToBeDestroyed()} signal of
+  QOpenGLContext. By connecting a slot, using direct connection, to this signal,
+  it is possible to perform cleanup whenever the the underlying native context
+  handle, or the entire QOpenGLContext instance, is going to be released. The
+  following snippet is in principal equivalent to the previous one:
+
+  \snippet code/doc_gui_widgets_qopenglwidget.cpp 5
+
+  \note For widgets that change their associated top-level window multiple times
+  during their lifetime, a combined approach is essential. Whenever the widget
+  or a parent of it gets reparented so that the top-level window becomes
+  different, the widget's associated context is destroyed and a new one is
+  created. This is then followed by a call to initializeGL() where all OpenGL
+  resources must get reinitialized. Due to this the only option to perform
+  proper cleanup is to connect to the context's aboutToBeDestroyed()
+  signal. Note that the context in question may not be the current one when the
+  signal gets emitted. Therefore it is good practice to call makeCurrent() in
+  the connected slot. Additionally, the same cleanup steps must be performed
+  from the derived class' destructor, since the slot connected to the signal
+  will not get invoked when the widget is being destroyed.
+
+  \note When Qt::AA_ShareOpenGLContexts is set, the widget's context never
+  changes, not even when reparenting because the widget's associated texture is
+  guaranteed to be accessible also from the new top-level's context.
+
+  Proper cleanup is especially important due to context sharing. Even though
+  each QOpenGLWidget's associated context is destroyed together with the
+  QOpenGLWidget, the sharable resources in that context, like textures, will
+  stay valid until the top-level window, in which the QOpenGLWidget lived, is
+  destroyed. Additionally, settings like Qt::AA_ShareOpenGLContexts and some Qt
+  modules may trigger an even wider scope for sharing contexts, potentially
+  leading to keeping the resources in question alive for the entire lifetime of
+  the application. Therefore the safest and most robust is always to perform
+  explicit cleanup for all resources and resource wrappers used in the
+  QOpenGLWidget.
+
+  \section1 Limitations
+
+  Putting other widgets underneath and making the QOpenGLWidget transparent will
+  not lead to the expected results: The widgets underneath will not be
+  visible. This is because in practice the QOpenGLWidget is drawn before all
+  other regular, non-OpenGL widgets, and so see-through type of solutions are
+  not feasible. Other type of layouts, like having widgets on top of the
+  QOpenGLWidget, will function as expected.
+
+  When absolutely necessary, this limitation can be overcome by setting the
+  Qt::WA_AlwaysStackOnTop attribute on the QOpenGLWidget. Be aware however that
+  this breaks stacking order, for example it will not be possible to have other
+  widgets on top of the QOpenGLWidget, so it should only be used in situations
+  where a semi-transparent QOpenGLWidget with other widgets visible underneath
+  is required.
+
+  Note that this does not apply when there are no other widgets underneath and
+  the intention is to have a semi-transparent window. In that case the
+  traditional approach of setting Qt::WA_TranslucentBackground is sufficient.
+
+  \e{OpenGL is a trademark of Silicon Graphics, Inc. in the United States and other
+  countries.}
+
+  \sa QOpenGLFunctions, QOpenGLWindow, Qt::AA_ShareOpenGLContexts
+*/
+
+/*!
+    \fn void QOpenGLWidget::aboutToCompose()
+
+    This signal is emitted when the widget's top-level window is about to begin
+    composing the textures of its QOpenGLWidget children and the other widgets.
+*/
+
+/*!
+    \fn void QOpenGLWidget::frameSwapped()
+
+    This signal is emitted after the widget's top-level window has finished
+    composition and returned from its potentially blocking
+    QOpenGLContext::swapBuffers() call.
+*/
+
+/*!
+    \fn void QOpenGLWidget::aboutToResize()
+
+    This signal is emitted when the widget's size is changed and therefore the
+    framebuffer object is going to be recreated.
+*/
+
+/*!
+    \fn void QOpenGLWidget::resized()
+
+    This signal is emitted right after the framebuffer object has been recreated
+    due to resizing the widget.
+*/
+
+class QOpenGLWidgetPaintDevice : public QOpenGLPaintDevice
+{
+public:
+    QOpenGLWidgetPaintDevice(QOpenGLWidget *widget) : w(widget) { }
+    void ensureActiveTarget() Q_DECL_OVERRIDE;
+
+private:
+    QOpenGLWidget *w;
+};
+
 class QOpenGLWidgetPrivate : public QWidgetPrivate
 {
     Q_DECLARE_PUBLIC(QOpenGLWidget)
 public:
     QOpenGLWidgetPrivate()
-        : fbo(0), uninitialized(true)
+        : context(0),
+          fbo(0),
+          resolvedFbo(0),
+          surface(0),
+          initialized(false),
+          fakeHidden(false),
+          paintDevice(0),
+          inBackingStorePaint(false)
     {
+        requestedFormat = QSurfaceFormat::defaultFormat();
     }
-    GLuint textureId() const { return fbo ? fbo->texture() : 0; }
 
-    const QSurface *surface() const { return q_func()->window()->windowHandle(); }
-    QSurface *surface() { return q_func()->window()->windowHandle(); }
+    ~QOpenGLWidgetPrivate()
+    {
+        reset();
+    }
+
+    void reset();
+    void recreateFbo();
+
+    GLuint textureId() const Q_DECL_OVERRIDE;
+
     void initialize();
+    void invokeUserPaint();
+    void render();
 
-    QOpenGLContext context;
-    QOpenGLFramebufferObject *fbo;
-    bool uninitialized;
+    QImage grabFramebuffer() Q_DECL_OVERRIDE;
+    void beginBackingStorePainting() Q_DECL_OVERRIDE { inBackingStorePaint = true; }
+    void endBackingStorePainting() Q_DECL_OVERRIDE { inBackingStorePaint = false; }
+    void beginCompose() Q_DECL_OVERRIDE;
+    void endCompose() Q_DECL_OVERRIDE;
+    void resizeViewportFramebuffer() Q_DECL_OVERRIDE;
+    void resolveSamples() Q_DECL_OVERRIDE;
 
-    int w,h;
+    QOpenGLContext *context;
+    QOpenGLFramebufferObject *fbo;
+    QOpenGLFramebufferObject *resolvedFbo;
+    QOffscreenSurface *surface;
+    bool initialized;
+    bool fakeHidden;
+    QOpenGLPaintDevice *paintDevice;
+    bool inBackingStorePaint;
+    QSurfaceFormat requestedFormat;
 };
 
+void QOpenGLWidgetPaintDevice::ensureActiveTarget()
+{
+    QOpenGLWidgetPrivate *d = static_cast<QOpenGLWidgetPrivate *>(QWidgetPrivate::get(w));
+    if (!d->initialized)
+        return;
+
+    if (QOpenGLContext::currentContext() != d->context)
+        w->makeCurrent();
+    else
+        d->fbo->bind();
+}
+
+GLuint QOpenGLWidgetPrivate::textureId() const
+{
+    return resolvedFbo ? resolvedFbo->texture() : (fbo ? fbo->texture() : 0);
+}
+
+void QOpenGLWidgetPrivate::reset()
+{
+    delete paintDevice;
+    paintDevice = 0;
+    delete fbo;
+    fbo = 0;
+    delete resolvedFbo;
+    resolvedFbo = 0;
+    // Delete the context first, then the surface. Slots connected to
+    // the context's aboutToBeDestroyed() may still call makeCurrent()
+    // to perform some cleanup.
+    delete context;
+    context = 0;
+    delete surface;
+    surface = 0;
+    initialized = fakeHidden = inBackingStorePaint = false;
+}
+
+void QOpenGLWidgetPrivate::recreateFbo()
+{
+    Q_Q(QOpenGLWidget);
+
+    emit q->aboutToResize();
+
+    context->makeCurrent(surface);
+
+    delete fbo;
+    fbo = 0;
+    delete resolvedFbo;
+    resolvedFbo = 0;
+
+    int samples = context->format().samples();
+    QOpenGLExtensions *extfuncs = static_cast<QOpenGLExtensions *>(context->functions());
+    if (!extfuncs->hasOpenGLExtension(QOpenGLExtensions::FramebufferMultisample))
+        samples = 0;
+
+    QOpenGLFramebufferObjectFormat format;
+    format.setAttachment(QOpenGLFramebufferObject::CombinedDepthStencil);
+    format.setSamples(samples);
+
+    const QSize deviceSize = q->size() * q->devicePixelRatio();
+    fbo = new QOpenGLFramebufferObject(deviceSize, format);
+    if (samples > 0)
+        resolvedFbo = new QOpenGLFramebufferObject(deviceSize);
+
+    fbo->bind();
+    context->functions()->glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT | GL_STENCIL_BUFFER_BIT);
+
+    paintDevice->setSize(deviceSize);
+    paintDevice->setDevicePixelRatio(q->devicePixelRatio());
+
+    emit q->resized();
+}
+
+void QOpenGLWidgetPrivate::beginCompose()
+{
+    Q_Q(QOpenGLWidget);
+    emit q->aboutToCompose();
+}
+
+void QOpenGLWidgetPrivate::endCompose()
+{
+    Q_Q(QOpenGLWidget);
+    emit q->frameSwapped();
+}
+
 void QOpenGLWidgetPrivate::initialize()
 {
     Q_Q(QOpenGLWidget);
-    if (!uninitialized)
+    if (initialized)
+        return;
+
+    // Get our toplevel's context with which we will share in order to make the
+    // texture usable by the underlying window's backingstore.
+    QWidget *tlw = q->window();
+    QOpenGLContext *shareContext = get(tlw)->shareContext();
+    if (!shareContext) {
+        qWarning("QOpenGLWidget: Cannot be used without a context shared with the toplevel.");
         return;
-    context.setShareContext(get(q->window())->shareContext());
-    context.setFormat(surface()->format());
-    context.create();
-    context.makeCurrent(surface());
+    }
+
+    QScopedPointer<QOpenGLContext> ctx(new QOpenGLContext);
+    ctx->setShareContext(shareContext);
+    ctx->setFormat(requestedFormat);
+    if (!ctx->create()) {
+        qWarning("QOpenGLWidget: Failed to create context");
+        return;
+    }
+
+    // Propagate settings that make sense only for the tlw.
+    QSurfaceFormat tlwFormat = tlw->windowHandle()->format();
+    if (requestedFormat.swapInterval() != tlwFormat.swapInterval()) {
+        // Most platforms will pick up the changed swap interval on the next
+        // makeCurrent or swapBuffers.
+        tlwFormat.setSwapInterval(requestedFormat.swapInterval());
+        tlw->windowHandle()->setFormat(tlwFormat);
+    }
+    if (requestedFormat.swapBehavior() != tlwFormat.swapBehavior()) {
+        tlwFormat.setSwapBehavior(requestedFormat.swapBehavior());
+        tlw->windowHandle()->setFormat(tlwFormat);
+    }
+
+    // The top-level window's surface is not good enough since it causes way too
+    // much trouble with regards to the QSurfaceFormat for example. So just like
+    // in QQuickWidget, use a dedicated QOffscreenSurface.
+    surface = new QOffscreenSurface;
+    surface->setFormat(ctx->format());
+    surface->create();
+
+    if (!ctx->makeCurrent(surface)) {
+        qWarning("QOpenGLWidget: Failed to make context current");
+        return;
+    }
+
+    paintDevice = new QOpenGLWidgetPaintDevice(q);
+    paintDevice->setSize(q->size() * q->devicePixelRatio());
+    paintDevice->setDevicePixelRatio(q->devicePixelRatio());
+
+    context = ctx.take();
+    initialized = true;
+
     q->initializeGL();
-    uninitialized = false;
 }
 
+void QOpenGLWidgetPrivate::resolveSamples()
+{
+    Q_Q(QOpenGLWidget);
+    if (resolvedFbo) {
+        q->makeCurrent();
+        QRect rect(QPoint(0, 0), fbo->size());
+        QOpenGLFramebufferObject::blitFramebuffer(resolvedFbo, rect, fbo, rect);
+    }
+}
+
+void QOpenGLWidgetPrivate::invokeUserPaint()
+{
+    Q_Q(QOpenGLWidget);
+    QOpenGLFunctions *f = QOpenGLContext::currentContext()->functions();
+    f->glViewport(0, 0, q->width() * q->devicePixelRatio(), q->height() * q->devicePixelRatio());
+
+    q->paintGL();
+}
+
+void QOpenGLWidgetPrivate::render()
+{
+    Q_Q(QOpenGLWidget);
+
+    if (fakeHidden || !initialized)
+        return;
+
+    q->makeCurrent();
+    invokeUserPaint();
+    context->functions()->glFlush();
+}
+
+extern Q_GUI_EXPORT QImage qt_gl_read_framebuffer(const QSize &size, bool alpha_format, bool include_alpha);
+
+QImage QOpenGLWidgetPrivate::grabFramebuffer()
+{
+    Q_Q(QOpenGLWidget);
+    if (!initialized)
+        return QImage();
+
+    render();
+    resolveSamples();
+    q->makeCurrent();
+    QImage res = qt_gl_read_framebuffer(q->size() * q->devicePixelRatio(), false, false);
+
+    return res;
+}
+
+void QOpenGLWidgetPrivate::resizeViewportFramebuffer()
+{
+    Q_Q(QOpenGLWidget);
+    if (!initialized)
+        return;
+
+    if (!fbo || q->size() * q->devicePixelRatio() != fbo->size())
+        recreateFbo();
+}
+
+/*!
+  Constructs a widget which is a child of \a parent, with widget flags set to \a f.
+ */
 QOpenGLWidget::QOpenGLWidget(QWidget *parent, Qt::WindowFlags f)
     : QWidget(*(new QOpenGLWidgetPrivate), parent, f)
 {
     Q_D(QOpenGLWidget);
-    d->setRenderToTexture();
+    if (QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::RasterGLSurface))
+        d->setRenderToTexture();
+    else
+        qWarning("QOpenGLWidget is not supported on this platform.");
 }
 
+/*!
+  Destroys the widget
+ */
 QOpenGLWidget::~QOpenGLWidget()
 {
 }
 
+/*!
+  Sets the requested surface \a format.
+
+  When the format is not explicitly set via this function, the format returned by
+  QSurfaceFormat::defaultFormat() will be used. This means that when having multiple
+  OpenGL widgets, individual calls to this function can be replaced by one single call to
+  QSurfaceFormat::setDefaultFormat() before creating the first widget.
+
+  \note Requesting an alpha buffer via this function, or by setting
+  Qt::WA_TranslucentBackground, will not lead to the desired results when the intention is
+  to make other widgets beneath visible. Instead, use Qt::WA_AlwaysStackOnTop to enable
+  semi-transparent QOpenGLWidget instances with other widgets visible underneath. Keep in
+  mind however that this breaks the stacking order, so it will no longer be possible to
+  have other widgets on top of the QOpenGLWidget. When the intention is to have a
+  semi-transparent top-level window, Qt::WA_TranslucentBackground is sufficient.
+
+  \sa format(), Qt::WA_AlwaysStackOnTop, QSurfaceFormat::setDefaultFormat()
+ */
+void QOpenGLWidget::setFormat(const QSurfaceFormat &format)
+{
+    Q_UNUSED(format);
+    Q_D(QOpenGLWidget);
+    if (d->initialized) {
+        qWarning("QOpenGLWidget: Already initialized, setting the format has no effect");
+        return;
+    }
+
+    d->requestedFormat = format;
+}
+
+/*!
+    Returns the context and surface format used by this widget and its toplevel
+    window.
+
+    After the widget and its toplevel have both been created, resized and shown,
+    this function will return the actual format of the context. This may differ
+    from the requested format if the request could not be fulfilled by the
+    platform. It is also possible to get larger color buffer sizes than
+    requested.
+
+    When the widget's window and the related OpenGL resources are not yet
+    initialized, the return value is the format that has been set via
+    setFormat().
+
+    \sa setFormat(), context()
+ */
+QSurfaceFormat QOpenGLWidget::format() const
+{
+    Q_D(const QOpenGLWidget);
+    return d->initialized ? d->context->format() : d->requestedFormat;
+}
+
+/*!
+  \return \e true if the widget and OpenGL resources, like the context, have
+  been successfully initialized. Note that the return value is always false
+  until the widget is shown.
+*/
 bool QOpenGLWidget::isValid() const
 {
     Q_D(const QOpenGLWidget);
-    return d->context.isValid();
+    return d->initialized && d->context->isValid();
 }
 
+/*!
+  Prepares for rendering OpenGL content for this widget by making the
+  corresponding context current and binding the framebuffer object in that
+  context.
+
+  It is not necessary to call this function in most cases, because it
+  is called automatically before invoking paintGL().
+
+  \sa context(), paintGL(), doneCurrent()
+ */
 void QOpenGLWidget::makeCurrent()
 {
     Q_D(QOpenGLWidget);
-    d->context.makeCurrent(d->surface());
-    d->fbo->bind();
+    if (!d->initialized) {
+        qWarning("QOpenGLWidget: Cannot make uninitialized widget current");
+        return;
+    }
+
+    d->context->makeCurrent(d->surface);
+
+    if (d->fbo) // there may not be one if we are in reset()
+        d->fbo->bind();
 }
 
+/*!
+  Releases the context.
+
+  It is not necessary to call this function in most cases, since the
+  widget will make sure the context is bound and released properly
+  when invoking paintGL().
+ */
 void QOpenGLWidget::doneCurrent()
 {
     Q_D(QOpenGLWidget);
-    d->context.doneCurrent();
+    if (!d->initialized)
+        return;
+
+    d->context->doneCurrent();
 }
 
-QSurfaceFormat QOpenGLWidget::format() const
+/*!
+  \return The QOpenGLContext used by this widget or \c 0 if not yet initialized.
+
+  \note The context and the framebuffer object used by the widget changes when
+  reparenting the widget via setParent().
+
+  \sa QOpenGLContext::setShareContext(), defaultFramebufferObject()
+ */
+QOpenGLContext *QOpenGLWidget::context() const
 {
     Q_D(const QOpenGLWidget);
-    return d->surface()->format();
+    return d->context;
 }
 
+/*!
+  \return The framebuffer object handle or \c 0 if not yet initialized.
+
+  \note The framebuffer object belongs to the context returned by context()
+  and may not be accessible from other contexts.
+
+  \note The context and the framebuffer object used by the widget changes when
+  reparenting the widget via setParent(). In addition, the framebuffer object
+  changes on each resize.
+
+  \sa context()
+ */
 GLuint QOpenGLWidget::defaultFramebufferObject() const
 {
     Q_D(const QOpenGLWidget);
     return d->fbo ? d->fbo->handle() : 0;
 }
 
+/*!
+  This virtual function is called once before the first call to
+  paintGL() or resizeGL(). Reimplement it in a subclass.
+
+  This function should set up any required OpenGL resources and state.
+
+  There is no need to call makeCurrent() because this has already been
+  done when this function is called. Note however that the framebuffer
+  is not yet available at this stage, so avoid issuing draw calls from
+  here. Defer such calls to paintGL() instead.
+
+  \sa paintGL(), resizeGL()
+*/
 void QOpenGLWidget::initializeGL()
 {
-
 }
 
+/*!
+  This virtual function is called whenever the widget has been
+  resized. Reimplement it in a subclass. The new size is passed in
+  \a w and \a h.
+
+  There is no need to call makeCurrent() because this has already been
+  done when this function is called. Additionally, the framebuffer is
+  also bound.
+
+  \sa initializeGL(), paintGL()
+*/
 void QOpenGLWidget::resizeGL(int w, int h)
 {
     Q_UNUSED(w);
     Q_UNUSED(h);
 }
 
+/*!
+  This virtual function is called whenever the widget needs to be
+  painted. Reimplement it in a subclass.
+
+  There is no need to call makeCurrent() because this has already
+  been done when this function is called.
+
+  Before invoking this function, the context and the framebuffer are
+  bound, and the viewport is set up by a call to glViewport(). No
+  other state is set and no clearing or drawing is performed by the
+  framework.
+
+  \sa initializeGL(), resizeGL()
+*/
 void QOpenGLWidget::paintGL()
 {
 }
 
-void QOpenGLWidget::updateGL()
+/*!
+  Handles resize events that are passed in the \a e event parameter.
+  Calls the virtual function resizeGL().
+
+  \note Avoid overriding this function in derived classes. If that is not
+  feasible, make sure that QOpenGLWidget's implementation is invoked
+  too. Otherwise the underlying framebuffer object and related resources will
+  not get resized properly and will lead to incorrect rendering.
+*/
+void QOpenGLWidget::resizeEvent(QResizeEvent *e)
 {
     Q_D(QOpenGLWidget);
-    if (d->uninitialized || !d->surface())
+
+    if (e->size().isEmpty()) {
+        d->fakeHidden = true;
         return;
+    }
+    d->fakeHidden = false;
 
-    makeCurrent();
-    paintGL();
-    d->context.functions()->glFlush();
-    doneCurrent();
-    update();
+    d->initialize();
+    if (!d->initialized)
+        return;
+
+    d->recreateFbo();
+    resizeGL(width(), height());
+    d->invokeUserPaint();
+    d->context->functions()->glFlush();
+    d->resolveSamples();
 }
 
+/*!
+  Handles paint events.
 
-void QOpenGLWidget::resizeEvent(QResizeEvent *)
+  Calling QWidget::update() will lead to sending a paint event \a e,
+  and thus invoking this function. (NB this is asynchronous and will
+  happen at some point after returning from update()). This function
+  will then, after some preparation, call the virtual paintGL() to
+  update the contents of the QOpenGLWidget's framebuffer. The widget's
+  top-level window will then composite the framebuffer's texture with
+  the rest of the window.
+*/
+void QOpenGLWidget::paintEvent(QPaintEvent *e)
 {
+    Q_UNUSED(e);
     Q_D(QOpenGLWidget);
-    d->w = width();
-    d->h = height();
-    d->initialize();
+    if (!d->initialized)
+        return;
 
-    d->context.makeCurrent(d->surface());
-    delete d->fbo; // recreate when resized
-    d->fbo = new QOpenGLFramebufferObject(size() * devicePixelRatio(), QOpenGLFramebufferObject::CombinedDepthStencil);
-    d->fbo->bind();
-    QOpenGLFunctions *funcs = d->context.functions();
-    resizeGL(width(), height());
-    paintGL();
-    funcs->glFlush();
+    if (updatesEnabled())
+        d->render();
+}
+
+/*!
+  Renders and returns a 32-bit RGB image of the framebuffer.
+
+  \note This is a potentially expensive operation because it relies on glReadPixels()
+  to read back the pixels. This may be slow and can stall the GPU pipeline.
+*/
+QImage QOpenGLWidget::grabFramebuffer()
+{
+    Q_D(QOpenGLWidget);
+    return d->grabFramebuffer();
+}
+
+/*!
+  \internal
+*/
+int QOpenGLWidget::metric(QPaintDevice::PaintDeviceMetric metric) const
+{
+    Q_D(const QOpenGLWidget);
+    if (d->inBackingStorePaint)
+        return QWidget::metric(metric);
+
+    QWidget *tlw = window();
+    QScreen *screen = tlw && tlw->windowHandle() ? tlw->windowHandle()->screen() : 0;
+    if (!screen && QGuiApplication::primaryScreen())
+        screen = QGuiApplication::primaryScreen();
+
+    const float dpmx = qt_defaultDpiX() * 100. / 2.54;
+    const float dpmy = qt_defaultDpiY() * 100. / 2.54;
+
+    switch (metric) {
+    case PdmWidth:
+        return width();
+    case PdmHeight:
+        return height();
+    case PdmDepth:
+        return 32;
+    case PdmWidthMM:
+        if (screen)
+            return width() * screen->physicalSize().width() / screen->geometry().width();
+        else
+            return width() * 1000 / dpmx;
+    case PdmHeightMM:
+        if (screen)
+            return height() * screen->physicalSize().height() / screen->geometry().height();
+        else
+            return height() * 1000 / dpmy;
+    case PdmNumColors:
+        return 0;
+    case PdmDpiX:
+        if (screen)
+            return qRound(screen->logicalDotsPerInchX());
+        else
+            return qRound(dpmx * 0.0254);
+    case PdmDpiY:
+        if (screen)
+            return qRound(screen->logicalDotsPerInchY());
+        else
+            return qRound(dpmy * 0.0254);
+    case PdmPhysicalDpiX:
+        if (screen)
+            return qRound(screen->physicalDotsPerInchX());
+        else
+            return qRound(dpmx * 0.0254);
+    case PdmPhysicalDpiY:
+        if (screen)
+            return qRound(screen->physicalDotsPerInchY());
+        else
+            return qRound(dpmy * 0.0254);
+    case PdmDevicePixelRatio:
+        if (screen)
+            return screen->devicePixelRatio();
+        else
+            return 1.0;
+    default:
+        qWarning("QOpenGLWidget::metric(): unknown metric %d", metric);
+        return 0;
+    }
+}
+
+/*!
+  \internal
+*/
+QPaintDevice *QOpenGLWidget::redirected(QPoint *p) const
+{
+    Q_D(const QOpenGLWidget);
+    if (d->inBackingStorePaint)
+        return QWidget::redirected(p);
+
+    return d->paintDevice;
 }
 
-void QOpenGLWidget::paintEvent(QPaintEvent *)
+/*!
+  \internal
+*/
+QPaintEngine *QOpenGLWidget::paintEngine() const
 {
-    qWarning("QOpenGLWidget does not support paintEvent() yet.");
-    return;
+    Q_D(const QOpenGLWidget);
+    // QWidget needs to "punch a hole" into the backingstore. This needs the
+    // normal paint engine and device, not the GL one. So in this mode, behave
+    // like a normal widget.
+    if (d->inBackingStorePaint)
+        return QWidget::paintEngine();
+
+    if (!d->initialized)
+        return 0;
+
+    return d->paintDevice->paintEngine();
+}
+
+/*!
+  \internal
+*/
+bool QOpenGLWidget::event(QEvent *e)
+{
+    Q_D(QOpenGLWidget);
+    switch (e->type()) {
+    case QEvent::WindowChangeInternal:
+        if (qGuiApp->testAttribute(Qt::AA_ShareOpenGLContexts))
+            break;
+        if (d->initialized)
+            d->reset();
+        // FALLTHROUGH
+    case QEvent::Show: // reparenting may not lead to a resize so reinitalize on Show too
+        if (!d->initialized && !size().isEmpty() && window() && window()->windowHandle()) {
+            d->initialize();
+            if (d->initialized)
+                d->recreateFbo();
+        }
+        break;
+    case QEvent::ScreenChangeInternal:
+        if (d->initialized && d->paintDevice->devicePixelRatio() != devicePixelRatio())
+            d->recreateFbo();
+        break;
+    default:
+        break;
+    }
+    return QWidget::event(e);
 }
 
 QT_END_NAMESPACE
diff --git a/src/widgets/kernel/qopenglwidget.h b/src/widgets/kernel/qopenglwidget.h
new file mode 100644
index 0000000000..2439fe65ce
--- /dev/null
+++ b/src/widgets/kernel/qopenglwidget.h
@@ -0,0 +1,98 @@
+/****************************************************************************
+**
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QtWidgets module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL21$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights. These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef QOPENGLWIDGET_H
+#define QOPENGLWIDGET_H
+
+#include <QtCore/qglobal.h>
+
+#ifndef QT_NO_OPENGL
+
+#include <QtWidgets/QWidget>
+#include <QtGui/QSurfaceFormat>
+#include <QtGui/qopengl.h>
+
+QT_BEGIN_NAMESPACE
+
+class QOpenGLWidgetPrivate;
+
+class Q_WIDGETS_EXPORT QOpenGLWidget : public QWidget
+{
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(QOpenGLWidget)
+
+public:
+    explicit QOpenGLWidget(QWidget* parent = 0, Qt::WindowFlags f = 0);
+    ~QOpenGLWidget();
+
+    void setFormat(const QSurfaceFormat &format);
+    QSurfaceFormat format() const;
+
+    bool isValid() const;
+
+    void makeCurrent();
+    void doneCurrent();
+
+    QOpenGLContext *context() const;
+    GLuint defaultFramebufferObject() const;
+
+    QImage grabFramebuffer();
+
+Q_SIGNALS:
+    void aboutToCompose();
+    void frameSwapped();
+    void aboutToResize();
+    void resized();
+
+protected:
+    virtual void initializeGL();
+    virtual void resizeGL(int w, int h);
+    virtual void paintGL();
+
+    void paintEvent(QPaintEvent *e) Q_DECL_OVERRIDE;
+    void resizeEvent(QResizeEvent *e) Q_DECL_OVERRIDE;
+    bool event(QEvent *e) Q_DECL_OVERRIDE;
+
+    int metric(QPaintDevice::PaintDeviceMetric metric) const Q_DECL_OVERRIDE;
+    QPaintDevice *redirected(QPoint *p) const Q_DECL_OVERRIDE;
+    QPaintEngine *paintEngine() const Q_DECL_OVERRIDE;
+
+private:
+    Q_DISABLE_COPY(QOpenGLWidget)
+};
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_OPENGL
+
+#endif // QOPENGLWIDGET_H
diff --git a/src/widgets/kernel/qopenglwidget_p.h b/src/widgets/kernel/qopenglwidget_p.h
deleted file mode 100644
index 1c7f0bfeec..0000000000
--- a/src/widgets/kernel/qopenglwidget_p.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtWidgets module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API. It may change from version to version
-// without notice, or even be removed.
-//
-// We mean it.
-//
-#ifndef QOPENGLWIDGET_H
-#define QOPENGLWIDGET_H
-
-#include <QWidget>
-#include <QSurfaceFormat>
-
-#include <QtGui/qopengl.h>
-
-QT_BEGIN_NAMESPACE
-
-class QOpenGLWidgetPrivate;
-
-class Q_WIDGETS_EXPORT QOpenGLWidget : public QWidget
-{
-    Q_OBJECT
-    Q_DECLARE_PRIVATE(QOpenGLWidget)
-
-public:
-    explicit QOpenGLWidget(QWidget* parent=0,
-                       Qt::WindowFlags f=0);
-
-// This API is not finalized yet. The commented-out functions below are
-// QGLWidget functions that have not been implemented for QOpenGLWidget.
-// Some of them may not end up in the final version (which is planned for a
-// future release of Qt).
-
-//    explicit QOpenGLWidget(const QSurfaceFormat& format, QWidget* parent=0,
-//                       Qt::WindowFlags f=0);
-    ~QOpenGLWidget();
-
-//    void qglClearColor(const QColor& c) const;
-
-    bool isValid() const;
-//    bool isSharing() const;
-
-    void makeCurrent();
-    void doneCurrent();
-
-//    void swapBuffers();
-
-    QSurfaceFormat format() const;
-    GLuint defaultFramebufferObject() const;
-
-//    QPixmap renderPixmap(int w = 0, int h = 0, bool useContext = false);
-    QImage grabFrameBuffer(bool withAlpha = false);
-
-//    static QImage convertToGLFormat(const QImage& img);
-
-//    QPaintEngine *paintEngine() const;
-
-//    void drawTexture(const QRectF &target, GLuint textureId, GLenum textureTarget = GL_TEXTURE_2D);
-//    void drawTexture(const QPointF &point, GLuint textureId, GLenum textureTarget = GL_TEXTURE_2D);
-
-public Q_SLOTS:
-    void updateGL();
-
-protected:
-//    bool event(QEvent *);
-    virtual void initializeGL();
-    virtual void resizeGL(int w, int h);
-    virtual void paintGL();
-
-//    void setAutoBufferSwap(bool on);
-//    bool autoBufferSwap() const;
-
-    void paintEvent(QPaintEvent*);
-    void resizeEvent(QResizeEvent*);
-
-//    virtual void glInit();
-//    virtual void glDraw();
-
-//    QOpenGLWidget(QOpenGLWidgetPrivate &dd,
-//              const QGLFormat &format = QGLFormat(),
-//              QWidget *parent = 0,
-//              const QOpenGLWidget* shareWidget = 0,
-//              Qt::WindowFlags f = 0);
-private:
-    Q_DISABLE_COPY(QOpenGLWidget)
-
-
-};
-
-QT_END_NAMESPACE
-
-#endif // QOPENGLWIDGET_H
diff --git a/src/widgets/kernel/qshortcut.cpp b/src/widgets/kernel/qshortcut.cpp
index 3683d6c7ce..3349b45467 100644
--- a/src/widgets/kernel/qshortcut.cpp
+++ b/src/widgets/kernel/qshortcut.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -51,7 +43,7 @@
 #include <private/qapplication_p.h>
 #include <private/qshortcutmap_p.h>
 #include <private/qaction_p.h>
-#include <private/qwidgetwindow_qpa_p.h>
+#include <private/qwidgetwindow_p.h>
 
 QT_BEGIN_NAMESPACE
 
diff --git a/src/widgets/kernel/qshortcut.h b/src/widgets/kernel/qshortcut.h
index 372cd9ff66..86db4bcdab 100644
--- a/src/widgets/kernel/qshortcut.h
+++ b/src/widgets/kernel/qshortcut.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qsizepolicy.h b/src/widgets/kernel/qsizepolicy.h
index 8c3724affb..9730ec1206 100644
--- a/src/widgets/kernel/qsizepolicy.h
+++ b/src/widgets/kernel/qsizepolicy.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -93,7 +85,6 @@ public:
 
     QSizePolicy() : data(0) { }
 
-    // ### Qt 5: merge these two constructors (with type == DefaultType)
     QSizePolicy(Policy horizontal, Policy vertical, ControlType type = DefaultType)
         : data(0) {
         bits.horPolicy = horizontal;
diff --git a/src/widgets/kernel/qstackedlayout.cpp b/src/widgets/kernel/qstackedlayout.cpp
index 316103b097..d9a7745686 100644
--- a/src/widgets/kernel/qstackedlayout.cpp
+++ b/src/widgets/kernel/qstackedlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qstackedlayout.h b/src/widgets/kernel/qstackedlayout.h
index 87715d10d8..b715f02069 100644
--- a/src/widgets/kernel/qstackedlayout.h
+++ b/src/widgets/kernel/qstackedlayout.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qstandardgestures.cpp b/src/widgets/kernel/qstandardgestures.cpp
index e57c3285d2..78a2c65060 100644
--- a/src/widgets/kernel/qstandardgestures.cpp
+++ b/src/widgets/kernel/qstandardgestures.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -335,7 +327,7 @@ QGestureRecognizer::Result QSwipeGestureRecognizer::recognize(QGesture *state,
             d->swipeAngle = QLineF(p1.startScreenPos(), p1.screenPos()).angle();
 
             static const int MoveThreshold = 50;
-            if (xDistance > MoveThreshold || yDistance > MoveThreshold) {
+            if (qAbs(xDistance) > MoveThreshold || qAbs(yDistance) > MoveThreshold) {
                 // measure the distance to check if the direction changed
                 d->lastPositions[0] = p1.screenPos().toPoint();
                 d->lastPositions[1] = p2.screenPos().toPoint();
diff --git a/src/widgets/kernel/qstandardgestures_p.h b/src/widgets/kernel/qstandardgestures_p.h
index 70cd241ab4..aeabd9cc7e 100644
--- a/src/widgets/kernel/qstandardgestures_p.h
+++ b/src/widgets/kernel/qstandardgestures_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qt_widgets_pch.h b/src/widgets/kernel/qt_widgets_pch.h
index 9e16d8f19e..08a49005de 100644
--- a/src/widgets/kernel/qt_widgets_pch.h
+++ b/src/widgets/kernel/qt_widgets_pch.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qtooltip.cpp b/src/widgets/kernel/qtooltip.cpp
index 16fb41e1fc..7fcc5d3bc6 100644
--- a/src/widgets/kernel/qtooltip.cpp
+++ b/src/widgets/kernel/qtooltip.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qtooltip.h b/src/widgets/kernel/qtooltip.h
index ccde405342..dd3bce9ddf 100644
--- a/src/widgets/kernel/qtooltip.h
+++ b/src/widgets/kernel/qtooltip.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwhatsthis.cpp b/src/widgets/kernel/qwhatsthis.cpp
index d5c249c074..632cb242dc 100644
--- a/src/widgets/kernel/qwhatsthis.cpp
+++ b/src/widgets/kernel/qwhatsthis.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwhatsthis.h b/src/widgets/kernel/qwhatsthis.h
index 37887b8cd5..ea0450060f 100644
--- a/src/widgets/kernel/qwhatsthis.h
+++ b/src/widgets/kernel/qwhatsthis.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidget.cpp b/src/widgets/kernel/qwidget.cpp
index 7396808442..de64755e4f 100644
--- a/src/widgets/kernel/qwidget.cpp
+++ b/src/widgets/kernel/qwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -69,7 +61,7 @@
 # include <private/qmainwindowlayout_p.h>
 #endif
 #include <qpa/qplatformwindow.h>
-#include "private/qwidgetwindow_qpa_p.h"
+#include "private/qwidgetwindow_p.h"
 #include "qpainter.h"
 #include "qtooltip.h"
 #include "qwhatsthis.h"
@@ -357,6 +349,13 @@ void QWidgetPrivate::scrollChildren(int dx, int dy)
     }
 }
 
+void QWidgetPrivate::setWSGeometry()
+{
+    Q_Q(QWidget);
+    if (QWindow *window = q->windowHandle())
+        window->setGeometry(data.crect);
+}
+
 void QWidgetPrivate::updateWidgetTransform(QEvent *event)
 {
     Q_Q(QWidget);
@@ -1065,7 +1064,11 @@ void QWidgetPrivate::adjustFlags(Qt::WindowFlags &flags, QWidget *w)
         // interpret WindowSystemMenuHint as a close button and we can't change that behavior
         // we can't just add this in.
 #ifndef Q_WS_MAC
-        if (flags & (Qt::WindowMinMaxButtonsHint | Qt::WindowCloseButtonHint | Qt::WindowContextHelpButtonHint)) {
+        if ((flags & (Qt::WindowMinMaxButtonsHint | Qt::WindowCloseButtonHint | Qt::WindowContextHelpButtonHint))
+#  ifdef Q_OS_WIN
+            && type != Qt::Dialog // QTBUG-2027, allow for menu-less dialogs.
+#  endif
+           ) {
             flags |= Qt::WindowSystemMenuHint;
 #else
         if (flags & (Qt::WindowMinMaxButtonsHint | Qt::WindowCloseButtonHint
@@ -1348,6 +1351,155 @@ void QWidget::create(WId window, bool initializeWindow, bool destroyOldWindow)
     d->updateFrameStrut();
 }
 
+void q_createNativeChildrenAndSetParent(const QWidget *parentWidget)
+{
+    QObjectList children = parentWidget->children();
+    for (int i = 0; i < children.size(); i++) {
+        if (children.at(i)->isWidgetType()) {
+            const QWidget *childWidget = qobject_cast<const QWidget *>(children.at(i));
+            if (childWidget) { // should not be necessary
+                if (childWidget->testAttribute(Qt::WA_NativeWindow)) {
+                    if (!childWidget->internalWinId())
+                        childWidget->winId();
+                    if (childWidget->windowHandle()) {
+                        QWindow *parentWindow = childWidget->nativeParentWidget()->windowHandle();
+                        if (childWidget->isWindow())
+                            childWidget->windowHandle()->setTransientParent(parentWindow);
+                        else
+                            childWidget->windowHandle()->setParent(parentWindow);
+                    }
+                } else {
+                    q_createNativeChildrenAndSetParent(childWidget);
+                }
+            }
+        }
+    }
+
+}
+
+void QWidgetPrivate::create_sys(WId window, bool initializeWindow, bool destroyOldWindow)
+{
+    Q_Q(QWidget);
+
+    Q_UNUSED(window);
+    Q_UNUSED(initializeWindow);
+    Q_UNUSED(destroyOldWindow);
+
+    Qt::WindowFlags flags = data.window_flags;
+
+    if (!q->testAttribute(Qt::WA_NativeWindow) && !q->isWindow())
+        return; // we only care about real toplevels
+
+    QWindow *win = topData()->window;
+    // topData() ensures the extra is created but does not ensure 'window' is non-null
+    // in case the extra was already valid.
+    if (!win) {
+        createTLSysExtra();
+        win = topData()->window;
+    }
+
+    foreach (const QByteArray &propertyName, q->dynamicPropertyNames()) {
+        if (!qstrncmp(propertyName, "_q_platform_", 12))
+            win->setProperty(propertyName, q->property(propertyName));
+    }
+
+#ifdef Q_OS_OSX
+    if (q->testAttribute(Qt::WA_ShowWithoutActivating))
+        win->setProperty("_q_showWithoutActivating", QVariant(true));
+#endif
+    win->setFlags(data.window_flags);
+    fixPosIncludesFrame();
+    if (q->testAttribute(Qt::WA_Moved)
+        || !QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::WindowManagement))
+        win->setGeometry(q->geometry());
+    else
+        win->resize(q->size());
+    if (win->isTopLevel())
+        win->setScreen(QGuiApplication::screens().value(topData()->screenIndex, 0));
+
+    QSurfaceFormat format = win->requestedFormat();
+    if ((flags & Qt::Window) && win->surfaceType() != QSurface::OpenGLSurface
+            && q->testAttribute(Qt::WA_TranslucentBackground)) {
+        format.setAlphaBufferSize(8);
+    }
+    win->setFormat(format);
+
+    if (QWidget *nativeParent = q->nativeParentWidget()) {
+        if (nativeParent->windowHandle()) {
+            if (flags & Qt::Window) {
+                win->setTransientParent(nativeParent->window()->windowHandle());
+                win->setParent(0);
+            } else {
+                win->setTransientParent(0);
+                win->setParent(nativeParent->windowHandle());
+            }
+        }
+    }
+
+    qt_window_private(win)->positionPolicy = topData()->posIncludesFrame ?
+        QWindowPrivate::WindowFrameInclusive : QWindowPrivate::WindowFrameExclusive;
+    win->create();
+    // Enable nonclient-area events for QDockWidget and other NonClientArea-mouse event processing.
+    if ((flags & Qt::Desktop) == Qt::Window)
+        win->handle()->setFrameStrutEventsEnabled(true);
+
+    data.window_flags = win->flags();
+
+    QBackingStore *store = q->backingStore();
+
+    if (!store) {
+        if (win && q->windowType() != Qt::Desktop) {
+            if (q->isTopLevel())
+                q->setBackingStore(new QBackingStore(win));
+        } else {
+            q->setAttribute(Qt::WA_PaintOnScreen, true);
+        }
+    }
+
+    setWindowModified_helper();
+    WId id = win->winId();
+    // See the QPlatformWindow::winId() documentation
+    Q_ASSERT(id != WId(0));
+    setWinId(id);
+
+    // Check children and create windows for them if necessary
+    q_createNativeChildrenAndSetParent(q);
+
+    if (extra && !extra->mask.isEmpty())
+        setMask_sys(extra->mask);
+
+    // If widget is already shown, set window visible, too
+    if (q->isVisible())
+        win->setVisible(true);
+}
+
+#ifdef Q_OS_WIN
+static const char activeXNativeParentHandleProperty[] = "_q_embedded_native_parent_handle";
+#endif
+
+void QWidgetPrivate::createTLSysExtra()
+{
+    Q_Q(QWidget);
+    if (!extra->topextra->window && (q->testAttribute(Qt::WA_NativeWindow) || q->isWindow())) {
+        extra->topextra->window = new QWidgetWindow(q);
+        if (extra->minw || extra->minh)
+            extra->topextra->window->setMinimumSize(QSize(extra->minw, extra->minh));
+        if (extra->maxw != QWIDGETSIZE_MAX || extra->maxh != QWIDGETSIZE_MAX)
+            extra->topextra->window->setMaximumSize(QSize(extra->maxw, extra->maxh));
+        if (extra->topextra->opacity != 255 && q->isWindow())
+            extra->topextra->window->setOpacity(qreal(extra->topextra->opacity) / qreal(255));
+#ifdef Q_OS_WIN
+        // Pass on native parent handle for Widget embedded into Active X.
+        const QVariant activeXNativeParentHandle = q->property(activeXNativeParentHandleProperty);
+        if (activeXNativeParentHandle.isValid())
+            extra->topextra->window->setProperty(activeXNativeParentHandleProperty, activeXNativeParentHandle);
+        if (q->inherits("QTipLabel") || q->inherits("QAlphaWidget"))
+            extra->topextra->window->setProperty("_q_windowsDropShadow", QVariant(true));
+#endif
+    }
+
+}
+
 /*!
     Destroys the widget.
 
@@ -1612,6 +1764,9 @@ void QWidgetPrivate::createExtra()
     }
 }
 
+void QWidgetPrivate::createSysExtra()
+{
+}
 
 /*!
   \internal
@@ -1642,6 +1797,46 @@ void QWidgetPrivate::deleteExtra()
     }
 }
 
+void QWidgetPrivate::deleteSysExtra()
+{
+}
+
+void QWidgetPrivate::deleteTLSysExtra()
+{
+    if (extra && extra->topextra) {
+        //the qplatformbackingstore may hold a reference to the window, so the backingstore
+        //needs to be deleted first. If the backingstore holds GL resources, we need to
+        // make the context current here, since the platform bs does not have a reference
+        // to the widget.
+
+#ifndef QT_NO_OPENGL
+        if (textureChildSeen && extra->topextra->shareContext)
+            extra->topextra->shareContext->makeCurrent(extra->topextra->window);
+#endif
+        extra->topextra->backingStoreTracker.destroy();
+        delete extra->topextra->backingStore;
+        extra->topextra->backingStore = 0;
+#ifndef QT_NO_OPENGL
+        if (textureChildSeen && extra->topextra->shareContext)
+            extra->topextra->shareContext->doneCurrent();
+        delete extra->topextra->shareContext;
+        extra->topextra->shareContext = 0;
+#endif
+
+        //the toplevel might have a context with a "qglcontext associated with it. We need to
+        //delete the qglcontext before we delete the qplatformopenglcontext.
+        //One unfortunate thing about this is that we potentially create a glContext just to
+        //delete it straight afterwards.
+        if (extra->topextra->window) {
+            extra->topextra->window->destroy();
+        }
+        setWinId(0);
+        delete extra->topextra->window;
+        extra->topextra->window = 0;
+
+    }
+}
+
 /*
   Returns \c true if there are widgets above this which overlap with
   \a rect, which is in parent's coordinate system (same as crect).
@@ -1825,17 +2020,11 @@ QRegion QWidgetPrivate::clipRegion() const
 void QWidgetPrivate::setSystemClip(QPaintDevice *paintDevice, const QRegion &region)
 {
 // Transform the system clip region from device-independent pixels to device pixels
-// Qt 5.0.0: This is a Mac-only code path for now, can be made cross-platform once
-// it has been tested.
     QPaintEngine *paintEngine = paintDevice->paintEngine();
-#ifdef Q_OS_MAC
     QTransform scaleTransform;
     const qreal devicePixelRatio = paintDevice->devicePixelRatio();
     scaleTransform.scale(devicePixelRatio, devicePixelRatio);
     paintEngine->d_func()->systemClip = scaleTransform.map(region);
-#else
-    paintEngine->d_func()->systemClip = region;
-#endif
 }
 
 #ifndef QT_NO_GRAPHICSEFFECT
@@ -2364,6 +2553,27 @@ WId QWidget::effectiveWinId() const
     return 0;
 }
 
+/*!
+    If this is a native widget, return the associated QWindow.
+    Otherwise return null.
+
+    Native widgets include toplevel widgets, QGLWidget, and child widgets
+    on which winId() was called.
+
+    \since 5.0
+
+    \sa winId()
+*/
+QWindow *QWidget::windowHandle() const
+{
+    Q_D(const QWidget);
+    QTLWExtra *extra = d->maybeTopData();
+    if (extra)
+        return extra->window;
+
+    return 0;
+}
+
 #ifndef QT_NO_STYLE_STYLESHEET
 
 /*!
@@ -2654,6 +2864,13 @@ void QWidget::setWindowModality(Qt::WindowModality windowModality)
     setAttribute(Qt::WA_SetWindowModality, true);
 }
 
+void QWidgetPrivate::setModal_sys()
+{
+    Q_Q(QWidget);
+    if (q->windowHandle())
+        q->windowHandle()->setModality(q->windowModality());
+}
+
 /*!
     \fn bool QWidget::underMouse() const
 
@@ -2747,6 +2964,17 @@ void QWidget::overrideWindowState(Qt::WindowStates newstate)
     QApplication::sendEvent(this, &e);
 }
 
+Qt::WindowState effectiveState(Qt::WindowStates state)
+{
+    if (state & Qt::WindowMinimized)
+        return Qt::WindowMinimized;
+    else if (state & Qt::WindowFullScreen)
+        return Qt::WindowFullScreen;
+    else if (state & Qt::WindowMaximized)
+        return Qt::WindowMaximized;
+    return Qt::WindowNoState;
+}
+
 /*!
     \fn void QWidget::setWindowState(Qt::WindowStates windowState)
 
@@ -2777,6 +3005,39 @@ void QWidget::overrideWindowState(Qt::WindowStates newstate)
 
     \sa Qt::WindowState, windowState()
 */
+void QWidget::setWindowState(Qt::WindowStates newstate)
+{
+    Q_D(QWidget);
+    Qt::WindowStates oldstate = windowState();
+    if (oldstate == newstate)
+        return;
+    if (isWindow() && !testAttribute(Qt::WA_WState_Created))
+        create();
+
+    data->window_state = newstate;
+    data->in_set_window_state = 1;
+    Qt::WindowState newEffectiveState = effectiveState(newstate);
+    Qt::WindowState oldEffectiveState = effectiveState(oldstate);
+    if (isWindow() && newEffectiveState != oldEffectiveState) {
+        // Ensure the initial size is valid, since we store it as normalGeometry below.
+        if (!testAttribute(Qt::WA_Resized) && !isVisible())
+            adjustSize();
+
+        d->createTLExtra();
+        if (oldEffectiveState == Qt::WindowNoState)
+            d->topData()->normalGeometry = geometry();
+
+        Q_ASSERT(windowHandle());
+        windowHandle()->setWindowState(newEffectiveState);
+    }
+    data->in_set_window_state = 0;
+
+    if (newstate & Qt::WindowActive)
+        activateWindow();
+
+    QWindowStateChangeEvent e(oldstate);
+    QApplication::sendEvent(this, &e);
+}
 
 /*!
     \property QWidget::fullScreen
@@ -3169,6 +3430,10 @@ void QWidget::setAcceptDrops(bool on)
 
 }
 
+void QWidgetPrivate::registerDropSite(bool on)
+{
+    Q_UNUSED(on);
+}
 
 /*!
     Disables widget input events if \a disable is true; otherwise
@@ -3643,6 +3908,28 @@ bool QWidgetPrivate::setMinimumSize_helper(int &minw, int &minh)
     return true;
 }
 
+void QWidgetPrivate::setConstraints_sys()
+{
+    Q_Q(QWidget);
+    if (extra && q->windowHandle()) {
+        QWindow *win = q->windowHandle();
+        QWindowPrivate *winp = qt_window_private(win);
+
+        winp->minimumSize = QSize(extra->minw, extra->minh);
+        winp->maximumSize = QSize(extra->maxw, extra->maxh);
+
+        if (extra->topextra) {
+            winp->baseSize = QSize(extra->topextra->basew, extra->topextra->baseh);
+            winp->sizeIncrement = QSize(extra->topextra->incw, extra->topextra->inch);
+        }
+
+        if (winp->platformWindow) {
+            fixPosIncludesFrame();
+            winp->platformWindow->propagateSizeHints();
+        }
+    }
+}
+
 /*!
     \overload
 
@@ -4293,6 +4580,10 @@ void QWidgetPrivate::setPalette_helper(const QPalette &palette)
     updateIsOpaque();
 }
 
+void QWidgetPrivate::updateSystemBackground()
+{
+}
+
 /*!
     \property QWidget::font
     \brief the font currently set for the widget
@@ -4629,6 +4920,13 @@ void QWidget::setCursor(const QCursor &cursor)
     QApplication::sendEvent(this, &event);
 }
 
+void QWidgetPrivate::setCursor_sys(const QCursor &cursor)
+{
+    Q_UNUSED(cursor);
+    Q_Q(QWidget);
+    qt_qpa_set_cursor(q, false);
+}
+
 void QWidget::unsetCursor()
 {
     Q_D(QWidget);
@@ -4644,6 +4942,62 @@ void QWidget::unsetCursor()
     QApplication::sendEvent(this, &event);
 }
 
+void QWidgetPrivate::unsetCursor_sys()
+{
+    Q_Q(QWidget);
+    qt_qpa_set_cursor(q, false);
+}
+
+static inline void applyCursor(QWidget *w, QCursor c)
+{
+    if (QWindow *window = w->windowHandle())
+        window->setCursor(c);
+}
+
+static inline void unsetCursor(QWidget *w)
+{
+    if (QWindow *window = w->windowHandle())
+        window->unsetCursor();
+}
+
+void qt_qpa_set_cursor(QWidget *w, bool force)
+{
+    if (!w->testAttribute(Qt::WA_WState_Created))
+        return;
+
+    static QPointer<QWidget> lastUnderMouse = 0;
+    if (force) {
+        lastUnderMouse = w;
+    } else if (lastUnderMouse) {
+        const WId lastWinId = lastUnderMouse->effectiveWinId();
+        const WId winId = w->effectiveWinId();
+        if (lastWinId && lastWinId == winId)
+            w = lastUnderMouse;
+    } else if (!w->internalWinId()) {
+        return; // The mouse is not under this widget, and it's not native, so don't change it.
+    }
+
+    while (!w->internalWinId() && w->parentWidget() && !w->isWindow()
+           && !w->testAttribute(Qt::WA_SetCursor))
+        w = w->parentWidget();
+
+    QWidget *nativeParent = w;
+    if (!w->internalWinId())
+        nativeParent = w->nativeParentWidget();
+    if (!nativeParent || !nativeParent->internalWinId())
+        return;
+
+    if (w->isWindow() || w->testAttribute(Qt::WA_SetCursor)) {
+        if (w->isEnabled())
+            applyCursor(nativeParent, w->cursor());
+        else
+            // Enforce the windows behavior of clearing the cursor on
+            // disabled widgets.
+            unsetCursor(nativeParent);
+    } else {
+        unsetCursor(nativeParent);
+    }
+}
 #endif
 
 /*!
@@ -5124,18 +5478,30 @@ void QWidgetPrivate::drawWidget(QPaintDevice *pdev, const QRegion &rgn, const QP
                 //paint the background
                 if ((asRoot || q->autoFillBackground() || onScreen || q->testAttribute(Qt::WA_StyledBackground))
                     && !q->testAttribute(Qt::WA_OpaquePaintEvent) && !q->testAttribute(Qt::WA_NoSystemBackground)) {
+#ifndef QT_NO_OPENGL
+                    beginBackingStorePainting();
+#endif
                     QPainter p(q);
                     paintBackground(&p, toBePainted, (asRoot || onScreen) ? flags | DrawAsRoot : 0);
+#ifndef QT_NO_OPENGL
+                    endBackingStorePainting();
+#endif
                 }
 
                 if (!sharedPainter)
                     setSystemClip(pdev, toBePainted.translated(offset));
 
                 if (!onScreen && !asRoot && !isOpaque && q->testAttribute(Qt::WA_TintedBackground)) {
+#ifndef QT_NO_OPENGL
+                    beginBackingStorePainting();
+#endif
                     QPainter p(q);
                     QColor tint = q->palette().window().color();
                     tint.setAlphaF(qreal(.6));
                     p.fillRect(toBePainted.boundingRect(), tint);
+#ifndef QT_NO_OPENGL
+                    endBackingStorePainting();
+#endif
                 }
             }
 
@@ -5145,16 +5511,30 @@ void QWidgetPrivate::drawWidget(QPaintDevice *pdev, const QRegion &rgn, const QP
                      << "geometry ==" << QRect(q->mapTo(q->window(), QPoint(0, 0)), q->size());
 #endif
 
+            bool grabbed = false;
+#ifndef QT_NO_OPENGL
             if (renderToTexture) {
                 // This widget renders into a texture which is composed later. We just need to
                 // punch a hole in the backingstore, so the texture will be visible.
-                QPainter p(q);
-                p.setCompositionMode(QPainter::CompositionMode_Source);
-                p.fillRect(q->rect(), Qt::transparent);
-            } else {
+                if (!q->testAttribute(Qt::WA_AlwaysStackOnTop)) {
+                    beginBackingStorePainting();
+                    QPainter p(q);
+                    if (backingStore) {
+                        p.setCompositionMode(QPainter::CompositionMode_Source);
+                        p.fillRect(q->rect(), Qt::transparent);
+                    } else {
+                        // We are not drawing to a backingstore: fall back to QImage
+                        p.drawImage(q->rect(), grabFramebuffer());
+                        grabbed = true;
+                    }
+                    endBackingStorePainting();
+                }
+            }
+#endif // QT_NO_OPENGL
+
+            if (!grabbed) {
                 //actually send the paint event
-                QPaintEvent e(toBePainted);
-                QCoreApplication::sendSpontaneousEvent(q, &e);
+                sendPaintEvent(toBePainted);
             }
 
             // Native widgets need to be marked dirty on screen so painting will be done in correct context
@@ -5210,6 +5590,18 @@ void QWidgetPrivate::drawWidget(QPaintDevice *pdev, const QRegion &rgn, const QP
     }
 }
 
+void QWidgetPrivate::sendPaintEvent(const QRegion &toBePainted)
+{
+    Q_Q(QWidget);
+    QPaintEvent e(toBePainted);
+    QCoreApplication::sendSpontaneousEvent(q, &e);
+
+#ifndef QT_NO_OPENGL
+    if (renderToTexture)
+        resolveSamples();
+#endif // QT_NO_OPENGL
+}
+
 void QWidgetPrivate::render(QPaintDevice *target, const QPoint &targetOffset,
                             const QRegion &sourceRegion, QWidget::RenderFlags renderFlags)
 {
@@ -5604,6 +5996,17 @@ void QWidgetPrivate::setWindowTitle_helper(const QString &title)
         setWindowTitle_sys(qt_setWindowTitle_helperHelper(title, q));
 }
 
+void QWidgetPrivate::setWindowTitle_sys(const QString &caption)
+{
+    Q_Q(QWidget);
+    if (!q->isWindow())
+        return;
+
+    if (QWindow *window = q->windowHandle())
+        window->setTitle(caption);
+
+}
+
 void QWidgetPrivate::setWindowIconText_helper(const QString &title)
 {
     Q_Q(QWidget);
@@ -5611,6 +6014,11 @@ void QWidgetPrivate::setWindowIconText_helper(const QString &title)
         setWindowIconText_sys(qt_setWindowTitle_helperHelper(title, q));
 }
 
+void QWidgetPrivate::setWindowIconText_sys(const QString &iconText)
+{
+    Q_UNUSED(iconText);
+}
+
 /*!
     \fn void QWidget::windowIconTextChanged(const QString &iconText)
 
@@ -5719,6 +6127,12 @@ void QWidget::setWindowIcon(const QIcon &icon)
     emit windowIconChanged(icon);
 }
 
+void QWidgetPrivate::setWindowIcon_sys()
+{
+    Q_Q(QWidget);
+    if (QWindow *window = q->windowHandle())
+        window->setIcon(q->windowIcon());
+}
 
 /*!
     \property QWidget::windowIconText
@@ -5794,6 +6208,16 @@ void QWidgetPrivate::setWindowFilePath_helper(const QString &filePath)
 #endif
 }
 
+void QWidgetPrivate::setWindowFilePath_sys(const QString &filePath)
+{
+    Q_Q(QWidget);
+    if (!q->isWindow())
+        return;
+
+    if (QWindow *window = q->windowHandle())
+        window->setFilePath(filePath);
+}
+
 /*!
     Returns the window's role, or an empty string.
 
@@ -6053,6 +6477,21 @@ void QWidget::setFocus(Qt::FocusReason reason)
     }
 }
 
+void QWidgetPrivate::setFocus_sys()
+{
+    Q_Q(QWidget);
+    // Embedded native widget may have taken the focus; get it back to toplevel if that is the case
+    const QWidget *topLevel = q->window();
+    if (topLevel->windowType() != Qt::Popup) {
+        if (QWindow *nativeWindow = q->window()->windowHandle()) {
+            if (nativeWindow != QGuiApplication::focusWindow()
+                && q->testAttribute(Qt::WA_WState_Created)) {
+                nativeWindow->requestActivate();
+            }
+        }
+    }
+}
+
 // updates focus_child on parent widgets to point into this widget
 void QWidgetPrivate::updateFocusChild()
 {
@@ -6130,6 +6569,11 @@ void QWidget::clearFocus()
             QAccessible::updateAccessibility(&event);
 #endif
         }
+
+        if (QTLWExtra *extra = window()->d_func()->maybeTopData()) {
+            if (extra->window)
+                emit extra->window->focusObjectChanged(extra->window->focusObject());
+        }
     }
 }
 
@@ -6554,6 +6998,31 @@ void QWidget::move(const QPoint &p)
         QWindowContainer::parentWasMoved(this);
 }
 
+// move() was invoked with Qt::WA_WState_Created not set (frame geometry
+// unknown), that is, crect has a position including the frame.
+// If we can determine the frame strut, fix that and clear the flag.
+void QWidgetPrivate::fixPosIncludesFrame()
+{
+    Q_Q(QWidget);
+    if (QTLWExtra *te = maybeTopData()) {
+        if (te->posIncludesFrame) {
+            // For Qt::WA_DontShowOnScreen, assume a frame of 0 (for
+            // example, in QGraphicsProxyWidget).
+            if (q->testAttribute(Qt::WA_DontShowOnScreen)) {
+                te->posIncludesFrame = 0;
+            } else {
+                if (q->windowHandle()) {
+                    updateFrameStrut();
+                    if (!q->data->fstrut_dirty) {
+                        data.crect.translate(te->frameStrut.x(), te->frameStrut.y());
+                        te->posIncludesFrame = 0;
+                    }
+                } // windowHandle()
+            } // !WA_DontShowOnScreen
+        } // posIncludesFrame
+    } // QTLWExtra
+}
+
 /*! \fn void QWidget::resize(int w, int h)
     \overload
 
@@ -6595,6 +7064,110 @@ void QWidget::setGeometry(const QRect &r)
         QWindowContainer::parentWasMoved(this);
 }
 
+void QWidgetPrivate::setGeometry_sys(int x, int y, int w, int h, bool isMove)
+{
+    Q_Q(QWidget);
+    if (extra) {                                // any size restrictions?
+        w = qMin(w,extra->maxw);
+        h = qMin(h,extra->maxh);
+        w = qMax(w,extra->minw);
+        h = qMax(h,extra->minh);
+    }
+
+    if (q->isWindow() && q->windowHandle()) {
+        QPlatformIntegration *integration = QGuiApplicationPrivate::platformIntegration();
+        if (!integration->hasCapability(QPlatformIntegration::NonFullScreenWindows)) {
+            x = 0;
+            y = 0;
+            w = q->windowHandle()->width();
+            h = q->windowHandle()->height();
+        }
+    }
+
+    QPoint oldp = q->geometry().topLeft();
+    QSize olds = q->size();
+    QRect r(x, y, w, h);
+
+    bool isResize = olds != r.size();
+    isMove = oldp != r.topLeft(); //### why do we have isMove as a parameter?
+
+
+    // We only care about stuff that changes the geometry, or may
+    // cause the window manager to change its state
+    if (r.size() == olds && oldp == r.topLeft())
+        return;
+
+    if (!data.in_set_window_state) {
+        q->data->window_state &= ~Qt::WindowMaximized;
+        q->data->window_state &= ~Qt::WindowFullScreen;
+        if (q->isWindow())
+            topData()->normalGeometry = QRect(0, 0, -1, -1);
+    }
+
+    QPoint oldPos = q->pos();
+    data.crect = r;
+
+    bool needsShow = false;
+
+    if (!(data.window_state & Qt::WindowFullScreen) && (w == 0 || h == 0)) {
+        q->setAttribute(Qt::WA_OutsideWSRange, true);
+        if (q->isVisible() && q->testAttribute(Qt::WA_Mapped))
+            hide_sys();
+        data.crect = QRect(x, y, w, h);
+    } else if (q->isVisible() && q->testAttribute(Qt::WA_OutsideWSRange)) {
+        q->setAttribute(Qt::WA_OutsideWSRange, false);
+        needsShow = true;
+    }
+
+    if (q->isVisible()) {
+        if (!q->testAttribute(Qt::WA_DontShowOnScreen) && !q->testAttribute(Qt::WA_OutsideWSRange)) {
+            if (q->windowHandle()) {
+                if (q->isWindow()) {
+                    q->windowHandle()->setGeometry(q->geometry());
+                } else {
+                    QPoint posInNativeParent =  q->mapTo(q->nativeParentWidget(),QPoint());
+                    q->windowHandle()->setGeometry(QRect(posInNativeParent,r.size()));
+                }
+
+                if (needsShow)
+                    show_sys();
+            }
+
+            if (!q->isWindow()) {
+                if (renderToTexture) {
+                    QRegion updateRegion(q->geometry());
+                    updateRegion += QRect(oldPos, olds);
+                    q->parentWidget()->d_func()->invalidateBuffer(updateRegion);
+                } else if (isMove && !isResize) {
+                    moveRect(QRect(oldPos, olds), x - oldPos.x(), y - oldPos.y());
+                } else {
+                    invalidateBuffer_resizeHelper(oldPos, olds);
+                }
+            }
+        }
+
+        // generate a move event for QWidgets without window handles. QWidgets with native
+        // window handles already receive a move event from
+        // QGuiApplicationPrivate::processGeometryChangeEvent.
+        if (isMove && (!q->windowHandle() || q->testAttribute(Qt::WA_DontShowOnScreen))) {
+            QMoveEvent e(q->pos(), oldPos);
+            QApplication::sendEvent(q, &e);
+        }
+        if (isResize) {
+            QResizeEvent e(r.size(), olds);
+            QApplication::sendEvent(q, &e);
+            if (q->windowHandle())
+                q->update();
+        }
+    } else { // not visible
+        if (isMove && q->pos() != oldPos)
+            q->setAttribute(Qt::WA_PendingMoveEvent, true);
+        if (isResize)
+            q->setAttribute(Qt::WA_PendingResizeEvent, true);
+    }
+
+}
+
 /*!
     \since 4.2
     Saves the current geometry and state for top-level widgets.
@@ -6630,8 +7203,12 @@ QByteArray QWidget::saveGeometry() const
     QDataStream stream(&array, QIODevice::WriteOnly);
     stream.setVersion(QDataStream::Qt_4_0);
     const quint32 magicNumber = 0x1D9D0CB;
-    quint16 majorVersion = 1;
+    // Version history:
+    // - Qt 4.2 - 4.8.6, 5.0 - 5.3    : Version 1.0
+    // - Qt 4.8.6 - today, 5.4 - today: Version 2.0, save screen width in addition to check for high DPI scaling.
+    quint16 majorVersion = 2;
     quint16 minorVersion = 0;
+    const int screenNumber = QApplication::desktop()->screenNumber(this);
     stream << magicNumber
            << majorVersion
            << minorVersion
@@ -6642,9 +7219,10 @@ QByteArray QWidget::saveGeometry() const
            << frameGeometry()
            << normalGeometry()
 #endif // Q_WS_MAC
-           << qint32(QApplication::desktop()->screenNumber(this))
+           << qint32(screenNumber)
            << quint8(windowState() & Qt::WindowMaximized)
-           << quint8(windowState() & Qt::WindowFullScreen);
+           << quint8(windowState() & Qt::WindowFullScreen)
+           << qint32(QApplication::desktop()->screenGeometry(screenNumber).width()); // 1.1 onwards
     return array;
 }
 
@@ -6684,13 +7262,13 @@ bool QWidget::restoreGeometry(const QByteArray &geometry)
     if (storedMagicNumber != magicNumber)
         return false;
 
-    const quint16 currentMajorVersion = 1;
+    const quint16 currentMajorVersion = 2;
     quint16 majorVersion = 0;
     quint16 minorVersion = 0;
 
     stream >> majorVersion >> minorVersion;
 
-    if (majorVersion != currentMajorVersion)
+    if (majorVersion > currentMajorVersion)
         return false;
     // (Allow all minor versions.)
 
@@ -6699,6 +7277,7 @@ bool QWidget::restoreGeometry(const QByteArray &geometry)
     qint32 restoredScreenNumber;
     quint8 maximized;
     quint8 fullScreen;
+    qint32 restoredScreenWidth = 0;
 
     stream >> restoredFrameGeometry
            >> restoredNormalGeometry
@@ -6706,6 +7285,24 @@ bool QWidget::restoreGeometry(const QByteArray &geometry)
            >> maximized
            >> fullScreen;
 
+    if (majorVersion > 1)
+        stream >> restoredScreenWidth;
+
+    const QDesktopWidget * const desktop = QApplication::desktop();
+    const qreal screenWidthF = qreal(desktop->screenGeometry(restoredScreenNumber).width());
+    // Sanity check bailing out when large variations of screen sizes occur due to
+    // high DPI scaling or different levels of DPI awareness.
+    if (restoredScreenWidth) {
+        const qreal factor = qreal(restoredScreenWidth) / screenWidthF;
+        if (factor < 0.8 || factor > 1.25)
+            return false;
+    } else {
+        // Saved by Qt 5.3 and earlier, try to prevent too large windows
+        // unless the size will be adapted by maximized or fullscreen.
+        if (!maximized && !fullScreen && qreal(restoredFrameGeometry.width()) / screenWidthF > 1.5)
+            return false;
+    }
+
     const int frameHeight = 20;
     if (!restoredFrameGeometry.isValid())
         restoredFrameGeometry = QRect(QPoint(0,0), sizeHint());
@@ -6719,7 +7316,6 @@ bool QWidget::restoreGeometry(const QByteArray &geometry)
                                        .expandedTo(d_func()->adjustedSize()));
     }
 
-    const QDesktopWidget * const desktop = QApplication::desktop();
     if (restoredScreenNumber >= desktop->numScreens())
         restoredScreenNumber = desktop->primaryScreen();
 
@@ -7208,6 +7804,62 @@ void QWidgetPrivate::show_helper()
     data.in_show = false;  // reset qws optimization
 }
 
+void QWidgetPrivate::show_sys()
+{
+    Q_Q(QWidget);
+
+    QWindow *window = q->windowHandle();
+
+    if (q->testAttribute(Qt::WA_DontShowOnScreen)) {
+        invalidateBuffer(q->rect());
+        q->setAttribute(Qt::WA_Mapped);
+        if (q->isWindow() && q->windowModality() != Qt::NonModal && window) {
+            // add our window to the modal window list
+            QGuiApplicationPrivate::showModalWindow(window);
+        }
+        return;
+    }
+
+    if (renderToTexture && !q->isWindow())
+        QApplication::postEvent(q->parentWidget(), new QUpdateLaterEvent(q->geometry()));
+    else
+        QApplication::postEvent(q, new QUpdateLaterEvent(q->rect()));
+
+    if (!q->isWindow() && !q->testAttribute(Qt::WA_NativeWindow))
+        return;
+
+    if (window) {
+        if (q->isWindow())
+            fixPosIncludesFrame();
+        QRect geomRect = q->geometry();
+        if (!q->isWindow()) {
+            QPoint topLeftOfWindow = q->mapTo(q->nativeParentWidget(),QPoint());
+            geomRect.moveTopLeft(topLeftOfWindow);
+        }
+        const QRect windowRect = window->geometry();
+        if (windowRect != geomRect) {
+            if (q->testAttribute(Qt::WA_Moved)
+                || !QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::WindowManagement))
+                window->setGeometry(geomRect);
+            else
+                window->resize(geomRect.size());
+        }
+
+#ifndef QT_NO_CURSOR
+        qt_qpa_set_cursor(q, false); // Needed in case cursor was set before show
+#endif
+        invalidateBuffer(q->rect());
+        window->setVisible(true);
+        // Was the window moved by the Window system or QPlatformWindow::initialGeometry() ?
+        if (window->isTopLevel()) {
+            const QPoint crectTopLeft = q->data->crect.topLeft();
+            const QPoint windowTopLeft = window->geometry().topLeft();
+            if (crectTopLeft == QPoint(0, 0) && windowTopLeft != crectTopLeft)
+                q->data->crect.moveTopLeft(windowTopLeft);
+        }
+    }
+}
+
 /*!
     Hides the widget. This function is equivalent to
     setVisible(false).
@@ -7285,6 +7937,39 @@ void QWidgetPrivate::hide_helper()
 #endif
 }
 
+void QWidgetPrivate::hide_sys()
+{
+    Q_Q(QWidget);
+
+    QWindow *window = q->windowHandle();
+
+    if (q->testAttribute(Qt::WA_DontShowOnScreen)) {
+        q->setAttribute(Qt::WA_Mapped, false);
+        if (q->isWindow() && q->windowModality() != Qt::NonModal && window) {
+            // remove our window from the modal window list
+            QGuiApplicationPrivate::hideModalWindow(window);
+        }
+        // do not return here, if window non-zero, we must hide it
+    }
+
+    deactivateWidgetCleanup();
+
+    if (!q->isWindow()) {
+        QWidget *p = q->parentWidget();
+        if (p &&p->isVisible()) {
+            if (renderToTexture)
+                p->d_func()->invalidateBuffer(q->geometry());
+            else
+                invalidateBuffer(q->rect());
+        }
+    } else {
+        invalidateBuffer(q->rect());
+    }
+
+    if (window)
+        window->setVisible(false);
+}
+
 /*!
     \fn bool QWidget::isHidden() const
 
@@ -8208,14 +8893,29 @@ bool QWidget::event(QEvent *event)
     case QEvent::ModifiedChange:
     case QEvent::MouseTrackingChange:
     case QEvent::ParentChange:
-    case QEvent::WindowStateChange:
     case QEvent::LocaleChange:
     case QEvent::MacSizeChange:
     case QEvent::ContentsRectChange:
     case QEvent::ThemeChange:
+    case QEvent::ReadOnlyChange:
         changeEvent(event);
         break;
 
+    case QEvent::WindowStateChange: {
+        const bool wasMinimized = static_cast<const QWindowStateChangeEvent *>(event)->oldState() & Qt::WindowMinimized;
+        if (wasMinimized != isMinimized()) {
+            if (wasMinimized) {
+                QShowEvent showEvent;
+                QCoreApplication::sendEvent(const_cast<QWidget *>(this), &showEvent);
+            } else {
+                QHideEvent hideEvent;
+                QCoreApplication::sendEvent(const_cast<QWidget *>(this), &hideEvent);
+            }
+        }
+        changeEvent(event);
+    }
+        break;
+
     case QEvent::WindowActivate:
     case QEvent::WindowDeactivate: {
         if (isVisible() && !palette().isEqual(QPalette::Active, QPalette::Inactive))
@@ -8348,6 +9048,12 @@ bool QWidget::event(QEvent *event)
         event->ignore();
         break;
 #endif
+    case QEvent::ScreenChangeInternal:
+        if (const QTLWExtra *te = d->maybeTopData()) {
+            const QWindow *win = te->window;
+            d->setWinId((win && win->handle()) ? win->handle()->winId() : 0);
+        }
+        break;
 #ifndef QT_NO_PROPERTIES
     case QEvent::DynamicPropertyChange: {
         const QByteArray &propName = static_cast<QDynamicPropertyChangeEvent *>(event)->propertyName();
@@ -8386,7 +9092,7 @@ bool QWidget::event(QEvent *event)
   QEvent::ModifiedChange, QEvent::MouseTrackingChange,
   QEvent::ParentChange, QEvent::WindowStateChange,
   QEvent::LanguageChange, QEvent::LocaleChange,
-  QEvent::LayoutDirectionChange.
+  QEvent::LayoutDirectionChange, QEvent::ReadOnlyChange.
 
 */
 void QWidget::changeEvent(QEvent * event)
@@ -9767,6 +10473,104 @@ void QWidget::setParent(QWidget *parent, Qt::WindowFlags f)
         QWindowContainer::parentWasChanged(this);
 }
 
+void QWidgetPrivate::setParent_sys(QWidget *newparent, Qt::WindowFlags f)
+{
+    Q_Q(QWidget);
+
+    Qt::WindowFlags oldFlags = data.window_flags;
+    bool wasCreated = q->testAttribute(Qt::WA_WState_Created);
+
+    int targetScreen = -1;
+    // Handle a request to move the widget to a particular screen
+    if (newparent && newparent->windowType() == Qt::Desktop) {
+        // make sure the widget is created on the same screen as the
+        // programmer specified desktop widget
+
+        // get the desktop's screen number
+        targetScreen = newparent->window()->d_func()->topData()->screenIndex;
+        newparent = 0;
+    }
+
+    setWinId(0);
+
+    if (parent != newparent) {
+        QObjectPrivate::setParent_helper(newparent); //### why does this have to be done in the _sys function???
+        if (q->windowHandle()) {
+            q->windowHandle()->setFlags(f);
+            QWidget *parentWithWindow =
+                newparent ? (newparent->windowHandle() ? newparent : newparent->nativeParentWidget()) : 0;
+            if (parentWithWindow) {
+                if (f & Qt::Window) {
+                    q->windowHandle()->setTransientParent(parentWithWindow->windowHandle());
+                    q->windowHandle()->setParent(0);
+                } else {
+                    q->windowHandle()->setTransientParent(0);
+                    q->windowHandle()->setParent(parentWithWindow->windowHandle());
+                }
+            } else {
+                q->windowHandle()->setTransientParent(0);
+                q->windowHandle()->setParent(0);
+            }
+        }
+    }
+
+    if (!newparent) {
+        f |= Qt::Window;
+        if (targetScreen == -1) {
+            if (parent)
+                targetScreen = q->parentWidget()->window()->d_func()->topData()->screenIndex;
+        }
+    }
+
+    bool explicitlyHidden = q->testAttribute(Qt::WA_WState_Hidden) && q->testAttribute(Qt::WA_WState_ExplicitShowHide);
+
+    // Reparenting toplevel to child
+    if (wasCreated && !(f & Qt::Window) && (oldFlags & Qt::Window) && !q->testAttribute(Qt::WA_NativeWindow)) {
+        if (extra && extra->hasWindowContainer)
+            QWindowContainer::toplevelAboutToBeDestroyed(q);
+
+        QWindow *newParentWindow = newparent->windowHandle();
+        if (!newParentWindow)
+            if (QWidget *npw = newparent->nativeParentWidget())
+                newParentWindow = npw->windowHandle();
+
+        Q_FOREACH (QObject *child, q->windowHandle()->children()) {
+            QWindow *childWindow = qobject_cast<QWindow *>(child);
+            if (!childWindow)
+                continue;
+
+            QWidgetWindow *childWW = qobject_cast<QWidgetWindow *>(childWindow);
+            QWidget *childWidget = childWW ? childWW->widget() : 0;
+            if (!childWW || (childWidget && childWidget->testAttribute(Qt::WA_NativeWindow)))
+                childWindow->setParent(newParentWindow);
+        }
+        q->destroy();
+    }
+
+    adjustFlags(f, q);
+    data.window_flags = f;
+    q->setAttribute(Qt::WA_WState_Created, false);
+    q->setAttribute(Qt::WA_WState_Visible, false);
+    q->setAttribute(Qt::WA_WState_Hidden, false);
+
+    if (newparent && wasCreated && (q->testAttribute(Qt::WA_NativeWindow) || (f & Qt::Window)))
+        q->createWinId();
+
+    if (q->isWindow() || (!newparent || newparent->isVisible()) || explicitlyHidden)
+        q->setAttribute(Qt::WA_WState_Hidden);
+    q->setAttribute(Qt::WA_WState_ExplicitShowHide, explicitlyHidden);
+
+    // move the window to the selected screen
+    if (!newparent && targetScreen != -1) {
+        if (maybeTopData())
+            maybeTopData()->screenIndex = targetScreen;
+        // only if it is already created
+        if (q->testAttribute(Qt::WA_WState_Created)) {
+            q->windowHandle()->setScreen(QGuiApplication::screens().value(targetScreen, 0));
+        }
+    }
+}
+
 /*!
     Scrolls the widget including its children \a dx pixels to the
     right and \a dy downward. Both \a dx and \a dy may be negative.
@@ -9812,6 +10616,13 @@ void QWidget::scroll(int dx, int dy)
     d->scroll_sys(dx, dy);
 }
 
+void QWidgetPrivate::scroll_sys(int dx, int dy)
+{
+    Q_Q(QWidget);
+    scrollChildren(dx, dy);
+    scrollRect(q->rect(), dx, dy);
+}
+
 /*!
     \overload
 
@@ -9846,6 +10657,11 @@ void QWidget::scroll(int dx, int dy, const QRect &r)
     d->scroll_sys(dx, dy, r);
 }
 
+void QWidgetPrivate::scroll_sys(int dx, int dy, const QRect &r)
+{
+    scrollRect(r, dx, dy);
+}
+
 /*!
     Repaints the widget directly by calling paintEvent() immediately,
     unless updates are disabled or the widget is hidden.
@@ -10093,7 +10909,7 @@ void QWidget::setAttribute(Qt::WidgetAttribute attribute, bool on)
 #ifdef Q_OS_WIN
     // ### Don't use PaintOnScreen+paintEngine() to do native painting in some future release
     if (attribute == Qt::WA_PaintOnScreen && on && windowType() != Qt::Desktop && !inherits("QGLWidget")) {
-        // see qwidget_qpa.cpp, ::paintEngine for details
+        // see ::paintEngine for details
         paintEngine();
         if (d->noPaintOnScreen)
             return;
@@ -10417,6 +11233,13 @@ void QWidget::setWindowOpacity(qreal opacity)
 #endif
 }
 
+void QWidgetPrivate::setWindowOpacity_sys(qreal level)
+{
+    Q_Q(QWidget);
+    if (q->windowHandle())
+        q->windowHandle()->setOpacity(level);
+}
+
 /*!
     \property QWidget::windowModified
     \brief whether the document shown in the window has unsaved changes
@@ -10586,12 +11409,21 @@ QString QWidget::whatsThis() const
 
   \brief the widget's name as seen by assistive technologies
 
-  This property is used by accessible clients to identify, find, or announce
-  the widget for accessible clients.
+  This is the primary name by which assistive technology such as screen readers
+  announce this widget. For most widgets setting this property is not required.
+  For example for QPushButton the button's text will be used.
+
+  It is important to set this property when the widget does not provide any
+  text. For example a button that only contains an icon needs to set this
+  property to work with screen readers.
+  The name should be short and equivalent to the visual information conveyed
+  by the widget.
+
+  This property has to be \l{Internationalization with Qt}{localized}.
 
   By default, this property contains an empty string.
 
-  \sa QAccessibleInterface::text()
+  \sa QWidget::accessibleDescription, QAccessibleInterface::text()
 */
 void QWidget::setAccessibleName(const QString &name)
 {
@@ -10612,9 +11444,16 @@ QString QWidget::accessibleName() const
 
   \brief the widget's description as seen by assistive technologies
 
-  By default, this property contains an empty string.
+  The accessible description of a widget should convey what a widget does.
+  While the \l accessibleName should be a short and consise string (e.g. \gui{Save}),
+  the description should give more context, such as \gui{Saves the current document}.
+
+  This property has to be \l{Internationalization with Qt}{localized}.
+
+  By default, this property contains an empty string and Qt falls back
+  to using the tool tip to provide this information.
 
-  \sa QAccessibleInterface::text()
+  \sa QWidget::accessibleName, QAccessibleInterface::text()
 */
 void QWidget::setAccessibleDescription(const QString &description)
 {
@@ -10774,6 +11613,19 @@ void QWidget::raise()
     QApplication::sendEvent(this, &e);
 }
 
+void QWidgetPrivate::raise_sys()
+{
+    Q_Q(QWidget);
+    if (q->isWindow() || q->testAttribute(Qt::WA_NativeWindow)) {
+        q->windowHandle()->raise();
+    } else if (renderToTexture) {
+        if (QWidget *p = q->parentWidget()) {
+            setDirtyOpaqueRegion();
+            p->d_func()->invalidateBuffer(effectiveRectFor(q->geometry()));
+        }
+    }
+}
+
 /*!
     Lowers the widget to the bottom of the parent widget's stack.
 
@@ -10811,6 +11663,17 @@ void QWidget::lower()
     QApplication::sendEvent(this, &e);
 }
 
+void QWidgetPrivate::lower_sys()
+{
+    Q_Q(QWidget);
+    if (q->isWindow() || q->testAttribute(Qt::WA_NativeWindow)) {
+        Q_ASSERT(q->testAttribute(Qt::WA_WState_Created));
+        q->windowHandle()->lower();
+    } else if (QWidget *p = q->parentWidget()) {
+        setDirtyOpaqueRegion();
+        p->d_func()->invalidateBuffer(effectiveRectFor(q->geometry()));
+    }
+}
 
 /*!
     Places the widget under \a w in the parent widget's stack.
@@ -10847,6 +11710,14 @@ void QWidget::stackUnder(QWidget* w)
     QApplication::sendEvent(this, &e);
 }
 
+void QWidgetPrivate::stackUnder_sys(QWidget*)
+{
+    Q_Q(QWidget);
+    if (QWidget *p = q->parentWidget()) {
+        setDirtyOpaqueRegion();
+        p->d_func()->invalidateBuffer(effectiveRectFor(q->geometry()));
+    }
+}
 
 /*!
     \fn bool QWidget::isTopLevel() const
@@ -10907,6 +11778,24 @@ QRect QWidgetPrivate::frameStrut() const
     return maybeTopData() ? maybeTopData()->frameStrut : QRect();
 }
 
+void QWidgetPrivate::updateFrameStrut()
+{
+    Q_Q(QWidget);
+    if (q->data->fstrut_dirty) {
+        if (QTLWExtra *te = maybeTopData()) {
+            if (te->window) {
+                if (const QPlatformWindow *pw = te->window->handle()) {
+                    const QMargins margins = pw->frameMargins();
+                    if (!margins.isNull()) {
+                        te->frameStrut.setCoords(margins.left(), margins.top(), margins.right(), margins.bottom());
+                        q->data->fstrut_dirty = false;
+                    }
+                }
+            }
+        }
+    }
+}
+
 #ifdef QT_KEYPAD_NAVIGATION
 /*!
     \internal
@@ -11159,8 +12048,8 @@ QOpenGLContext *QWidgetPrivate::shareContext() const
     }
     QWidgetPrivate *that = const_cast<QWidgetPrivate *>(this);
     if (!extra->topextra->shareContext) {
-        QOpenGLContext *ctx = new QOpenGLContext();
-        ctx->setShareContext(QOpenGLContextPrivate::globalShareContext());
+        QOpenGLContext *ctx = new QOpenGLContext;
+        ctx->setShareContext(qt_gl_global_share_context());
         ctx->setFormat(extra->topextra->window->format());
         ctx->create();
         that->extra->topextra->shareContext = ctx;
@@ -11169,6 +12058,24 @@ QOpenGLContext *QWidgetPrivate::shareContext() const
 #endif // QT_NO_OPENGL
 }
 
+#ifndef QT_NO_OPENGL
+void QWidgetPrivate::sendComposeStatus(QWidget *w, bool end)
+{
+    QWidgetPrivate *wd = QWidgetPrivate::get(w);
+    if (!wd->textureChildSeen)
+        return;
+    if (end)
+        wd->endCompose();
+    else
+        wd->beginCompose();
+    for (int i = 0; i < wd->children.size(); ++i) {
+        w = qobject_cast<QWidget *>(wd->children.at(i));
+        if (w && !w->isWindow() && !w->isHidden() && QWidgetPrivate::get(w)->textureChildSeen)
+            sendComposeStatus(w, end);
+    }
+}
+#endif // QT_NO_OPENGL
+
 Q_WIDGETS_EXPORT QWidgetData *qt_qwidget_data(QWidget *widget)
 {
     return widget->data;
@@ -11243,6 +12150,50 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     This function is usually called from the QWidget destructor.
 */
+void QWidget::destroy(bool destroyWindow, bool destroySubWindows)
+{
+    Q_D(QWidget);
+
+    d->aboutToDestroy();
+    if (!isWindow() && parentWidget())
+        parentWidget()->d_func()->invalidateBuffer(d->effectiveRectFor(geometry()));
+    d->deactivateWidgetCleanup();
+
+    if ((windowType() == Qt::Popup) && qApp)
+        qApp->d_func()->closePopup(this);
+
+    if (this == QApplicationPrivate::active_window)
+        QApplication::setActiveWindow(0);
+    if (QWidget::mouseGrabber() == this)
+        releaseMouse();
+    if (QWidget::keyboardGrabber() == this)
+        releaseKeyboard();
+
+    setAttribute(Qt::WA_WState_Created, false);
+
+    if (windowType() != Qt::Desktop) {
+        if (destroySubWindows) {
+            QObjectList childList(children());
+            for (int i = 0; i < childList.size(); i++) {
+                QWidget *widget = qobject_cast<QWidget *>(childList.at(i));
+                if (widget && widget->testAttribute(Qt::WA_NativeWindow)) {
+                    if (widget->windowHandle()) {
+                        widget->destroy();
+                    }
+                }
+            }
+        }
+        if (destroyWindow) {
+            d->deleteTLSysExtra();
+        } else {
+            if (parentWidget() && parentWidget()->testAttribute(Qt::WA_WState_Created)) {
+                d->hide_sys();
+            }
+        }
+
+        d->setWinId(0);
+    }
+}
 
 /*!
     \fn QPaintEngine *QWidget::paintEngine() const
@@ -11254,6 +12205,30 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
     function is called by Qt internally, and the default
     implementation may not always return a valid pointer.
 */
+QPaintEngine *QWidget::paintEngine() const
+{
+    qWarning("QWidget::paintEngine: Should no longer be called");
+
+#ifdef Q_OS_WIN
+    // We set this bit which is checked in setAttribute for
+    // Qt::WA_PaintOnScreen. We do this to allow these two scenarios:
+    //
+    // 1. Users accidentally set Qt::WA_PaintOnScreen on X and port to
+    // Windows which would mean suddenly their widgets stop working.
+    //
+    // 2. Users set paint on screen and subclass paintEngine() to
+    // return 0, in which case we have a "hole" in the backingstore
+    // allowing use of GDI or DirectX directly.
+    //
+    // 1 is WRONG, but to minimize silent failures, we have set this
+    // bit to ignore the setAttribute call. 2. needs to be
+    // supported because its our only means of embedding native
+    // graphics stuff.
+    const_cast<QWidgetPrivate *>(d_func())->noPaintOnScreen = 1;
+#endif
+
+    return 0; //##### @@@
+}
 
 /*!
     \fn QPoint QWidget::mapToGlobal(const QPoint &pos) const
@@ -11264,6 +12239,21 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa mapFromGlobal(), mapTo(), mapToParent()
 */
+QPoint QWidget::mapToGlobal(const QPoint &pos) const
+{
+    int x = pos.x(), y = pos.y();
+    const QWidget *w = this;
+    while (w) {
+        QWindow *window = w->windowHandle();
+        if (window && window->handle())
+            return window->mapToGlobal(QPoint(x, y));
+
+        x += w->data->crect.x();
+        y += w->data->crect.y();
+        w = w->isWindow() ? 0 : w->parentWidget();
+    }
+    return QPoint(x, y);
+}
 
 /*!
     \fn QPoint QWidget::mapFromGlobal(const QPoint &pos) const
@@ -11273,6 +12263,75 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa mapToGlobal(), mapFrom(), mapFromParent()
 */
+QPoint QWidget::mapFromGlobal(const QPoint &pos) const
+{
+    int x = pos.x(), y = pos.y();
+    const QWidget *w = this;
+    while (w) {
+        QWindow *window = w->windowHandle();
+        if (window && window->handle())
+            return window->mapFromGlobal(QPoint(x, y));
+
+        x -= w->data->crect.x();
+        y -= w->data->crect.y();
+        w = w->isWindow() ? 0 : w->parentWidget();
+    }
+    return QPoint(x, y);
+}
+
+QWidget *qt_pressGrab = 0;
+QWidget *qt_mouseGrb = 0;
+static bool mouseGrabWithCursor = false;
+static QWidget *keyboardGrb = 0;
+
+static inline QWindow *grabberWindow(const QWidget *w)
+{
+    QWindow *window = w->windowHandle();
+    if (!window)
+        if (const QWidget *nativeParent = w->nativeParentWidget())
+            window = nativeParent->windowHandle();
+    return window;
+}
+
+#ifndef QT_NO_CURSOR
+static void grabMouseForWidget(QWidget *widget, const QCursor *cursor = 0)
+#else
+static void grabMouseForWidget(QWidget *widget)
+#endif
+{
+    if (qt_mouseGrb)
+        qt_mouseGrb->releaseMouse();
+
+    mouseGrabWithCursor = false;
+    if (QWindow *window = grabberWindow(widget)) {
+#ifndef QT_NO_CURSOR
+        if (cursor) {
+            mouseGrabWithCursor = true;
+            QGuiApplication::setOverrideCursor(*cursor);
+        }
+#endif // !QT_NO_CURSOR
+        window->setMouseGrabEnabled(true);
+    }
+
+    qt_mouseGrb = widget;
+    qt_pressGrab = 0;
+}
+
+static void releaseMouseGrabOfWidget(QWidget *widget)
+{
+    if (qt_mouseGrb == widget) {
+        if (QWindow *window = grabberWindow(widget)) {
+#ifndef QT_NO_CURSOR
+            if (mouseGrabWithCursor) {
+                QGuiApplication::restoreOverrideCursor();
+                mouseGrabWithCursor = false;
+            }
+#endif // !QT_NO_CURSOR
+            window->setMouseGrabEnabled(false);
+        }
+    }
+    qt_mouseGrb = 0;
+}
 
 /*!
     \fn void QWidget::grabMouse()
@@ -11303,6 +12362,10 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa releaseMouse(), grabKeyboard(), releaseKeyboard()
 */
+void QWidget::grabMouse()
+{
+    grabMouseForWidget(this);
+}
 
 /*!
     \fn void QWidget::grabMouse(const QCursor &cursor)
@@ -11320,6 +12383,21 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa releaseMouse(), grabKeyboard(), releaseKeyboard(), setCursor()
 */
+#ifndef QT_NO_CURSOR
+void QWidget::grabMouse(const QCursor &cursor)
+{
+    grabMouseForWidget(this, &cursor);
+}
+#endif
+
+bool QWidgetPrivate::stealMouseGrab(bool grab)
+{
+    // This is like a combination of grab/releaseMouse() but with error checking
+    // and it has no effect on the result of mouseGrabber().
+    Q_Q(QWidget);
+    QWindow *window = grabberWindow(q);
+    return window ? window->setMouseGrabEnabled(grab) : false;
+}
 
 /*!
     \fn void QWidget::releaseMouse()
@@ -11328,6 +12406,10 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa grabMouse(), grabKeyboard(), releaseKeyboard()
 */
+void QWidget::releaseMouse()
+{
+    releaseMouseGrabOfWidget(this);
+}
 
 /*!
     \fn void QWidget::grabKeyboard()
@@ -11348,6 +12430,23 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa releaseKeyboard(), grabMouse(), releaseMouse(), focusWidget()
 */
+void QWidget::grabKeyboard()
+{
+    if (keyboardGrb)
+        keyboardGrb->releaseKeyboard();
+    if (QWindow *window = grabberWindow(this))
+        window->setKeyboardGrabEnabled(true);
+    keyboardGrb = this;
+}
+
+bool QWidgetPrivate::stealKeyboardGrab(bool grab)
+{
+    // This is like a combination of grab/releaseKeyboard() but with error
+    // checking and it has no effect on the result of keyboardGrabber().
+    Q_Q(QWidget);
+    QWindow *window = grabberWindow(q);
+    return window ? window->setKeyboardGrabEnabled(grab) : false;
+}
 
 /*!
     \fn void QWidget::releaseKeyboard()
@@ -11356,6 +12455,14 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa grabKeyboard(), grabMouse(), releaseMouse()
 */
+void QWidget::releaseKeyboard()
+{
+    if (keyboardGrb == this) {
+        if (QWindow *window = grabberWindow(this))
+            window->setKeyboardGrabEnabled(false);
+        keyboardGrb = 0;
+    }
+}
 
 /*!
     \fn QWidget *QWidget::mouseGrabber()
@@ -11367,6 +12474,12 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa grabMouse(), keyboardGrabber()
 */
+QWidget *QWidget::mouseGrabber()
+{
+    if (qt_mouseGrb)
+        return qt_mouseGrb;
+    return qt_pressGrab;
+}
 
 /*!
     \fn QWidget *QWidget::keyboardGrabber()
@@ -11378,6 +12491,10 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa grabMouse(), mouseGrabber()
 */
+QWidget *QWidget::keyboardGrabber()
+{
+    return keyboardGrb;
+}
 
 /*!
     \fn void QWidget::activateWindow()
@@ -11403,6 +12520,13 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \sa isActiveWindow(), window(), show()
 */
+void QWidget::activateWindow()
+{
+    QWindow *const wnd = window()->windowHandle();
+
+    if (wnd)
+        wnd->requestActivate();
+}
 
 /*!
     \fn int QWidget::metric(PaintDeviceMetric m) const
@@ -11412,6 +12536,62 @@ void QWidget::ungrabGesture(Qt::GestureType gesture)
 
     \a m is the metric to get.
 */
+int QWidget::metric(PaintDeviceMetric m) const
+{
+    Q_D(const QWidget);
+
+    QWindow *topLevelWindow = 0;
+    QScreen *screen = 0;
+    if (QWidget *topLevel = window())
+        topLevelWindow = topLevel->windowHandle();
+
+    if (topLevelWindow) {
+        QPlatformScreen *platformScreen = QPlatformScreen::platformScreenForWindow(topLevelWindow);
+        if (platformScreen)
+            screen = platformScreen->screen();
+    }
+    if (!screen && QGuiApplication::primaryScreen())
+        screen = QGuiApplication::primaryScreen();
+
+    if (!screen) {
+        if (m == PdmDpiX || m == PdmDpiY)
+              return 72;
+        return QPaintDevice::metric(m);
+    }
+    int val;
+    if (m == PdmWidth) {
+        val = data->crect.width();
+    } else if (m == PdmWidthMM) {
+        val = data->crect.width() * screen->physicalSize().width() / screen->geometry().width();
+    } else if (m == PdmHeight) {
+        val = data->crect.height();
+    } else if (m == PdmHeightMM) {
+        val = data->crect.height() * screen->physicalSize().height() / screen->geometry().height();
+    } else if (m == PdmDepth) {
+        return screen->depth();
+    } else if (m == PdmDpiX) {
+        if (d->extra && d->extra->customDpiX)
+            return d->extra->customDpiX;
+        else if (d->parent)
+            return static_cast<QWidget *>(d->parent)->metric(m);
+        return qRound(screen->logicalDotsPerInchX());
+    } else if (m == PdmDpiY) {
+        if (d->extra && d->extra->customDpiY)
+            return d->extra->customDpiY;
+        else if (d->parent)
+            return static_cast<QWidget *>(d->parent)->metric(m);
+        return qRound(screen->logicalDotsPerInchY());
+    } else if (m == PdmPhysicalDpiX) {
+        return qRound(screen->physicalDotsPerInchX());
+    } else if (m == PdmPhysicalDpiY) {
+        return qRound(screen->physicalDotsPerInchY());
+    } else if (m == PdmDevicePixelRatio) {
+        return topLevelWindow ? topLevelWindow->devicePixelRatio() : qApp->devicePixelRatio();
+    } else {
+        val = QPaintDevice::metric(m);// XXX
+    }
+    return val;
+}
 
 /*!
     Initializes the \a painter pen, background and font to the same as
@@ -11517,6 +12697,14 @@ void QWidget::setMask(const QRegion &newMask)
 #endif
 }
 
+void QWidgetPrivate::setMask_sys(const QRegion &region)
+{
+    Q_Q(QWidget);
+    if (const QWindow *window = q->windowHandle())
+        if (QPlatformWindow *platformWindow = window->handle())
+            platformWindow->setMask(region);
+}
+
 /*!
     \fn void QWidget::setMask(const QBitmap &bitmap)
 
diff --git a/src/widgets/kernel/qwidget.h b/src/widgets/kernel/qwidget.h
index 159011b824..ad1e276567 100644
--- a/src/widgets/kernel/qwidget.h
+++ b/src/widgets/kernel/qwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -694,7 +686,6 @@ private:
     friend class QPixmap; // for QPixmap::fill()
     friend class QFontMetrics;
     friend class QFontInfo;
-    friend class QETWidget;
     friend class QLayout;
     friend class QWidgetItem;
     friend class QWidgetItemV2;
diff --git a/src/widgets/kernel/qwidget_p.h b/src/widgets/kernel/qwidget_p.h
index 9586d1a8c9..e80447c477 100644
--- a/src/widgets/kernel/qwidget_p.h
+++ b/src/widgets/kernel/qwidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -61,6 +53,7 @@
 #include "QtGui/qregion.h"
 #include "QtGui/qinputmethod.h"
 #include "QtGui/qopengl.h"
+#include "QtGui/qsurfaceformat.h"
 #include "QtWidgets/qsizepolicy.h"
 #include "QtWidgets/qstyle.h"
 #include "QtWidgets/qapplication.h"
@@ -392,6 +385,7 @@ public:
                 QWidget::RenderFlags renderFlags);
     void drawWidget(QPaintDevice *pdev, const QRegion &rgn, const QPoint &offset, int flags,
                     QPainter *sharedPainter = 0, QWidgetBackingStore *backingStore = 0);
+    void sendPaintEvent(const QRegion &toBePainted);
 
 
     void paintSiblingsRecursive(QPaintDevice *pdev, const QObjectList& children, int index,
@@ -627,7 +621,11 @@ public:
 
 #ifndef QT_NO_OPENGL
     virtual GLuint textureId() const { return 0; }
-
+    virtual QImage grabFramebuffer() { return QImage(); }
+    virtual void beginBackingStorePainting() { }
+    virtual void endBackingStorePainting() { }
+    virtual void beginCompose() { }
+    virtual void endCompose() { }
     void setRenderToTexture() { renderToTexture = true; setTextureChildSeen(); }
     void setTextureChildSeen()
     {
@@ -642,6 +640,13 @@ public:
                 get(parent)->setTextureChildSeen();
         }
     }
+    static void sendComposeStatus(QWidget *w, bool end);
+    // When using a QOpenGLWidget as viewport with QAbstractScrollArea, resize events are
+    // filtered away from the widget. This is fine for QGLWidget but bad for QOpenGLWidget
+    // since the fbo must be resized. We need an alternative way to notify.
+    virtual void resizeViewportFramebuffer() { }
+    // Called after each paint event.
+    virtual void resolveSamples() { }
 #endif
 
     // Variables.
@@ -732,7 +737,7 @@ public:
 
     // *************************** Platform specific ************************************
 #if defined(Q_OS_WIN)
-    uint noPaintOnScreen : 1; // see qwidget_qpa.cpp ::paintEngine()
+    uint noPaintOnScreen : 1; // see qwidget.cpp ::paintEngine()
 #endif
 #if defined(Q_WS_X11) // <----------------------------------------------------------- X11
     Qt::HANDLE picture;
diff --git a/src/widgets/kernel/qwidget_qpa.cpp b/src/widgets/kernel/qwidget_qpa.cpp
deleted file mode 100644
index b734307d40..0000000000
--- a/src/widgets/kernel/qwidget_qpa.cpp
+++ /dev/null
@@ -1,1142 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
-** Contact: http://www.qt-project.org/legal
-**
-** This file is part of the QtWidgets module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
-** use the contact form at http://qt.digia.com/contact-us.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "QtWidgets/qwidget.h"
-#include "QtGui/qevent.h"
-#include "QtWidgets/qapplication.h"
-#include "private/qwidgetbackingstore_p.h"
-#include "private/qwidget_p.h"
-#include "private/qwidgetwindow_qpa_p.h"
-#include "private/qapplication_p.h"
-#include "QtWidgets/qdesktopwidget.h"
-#include <qpa/qplatformwindow.h>
-#include "QtGui/qsurfaceformat.h"
-#include <QtGui/qopenglcontext.h>
-#include <qpa/qplatformopenglcontext.h>
-#include <qpa/qplatformintegration.h>
-#include "QtGui/private/qwindow_p.h"
-#include "QtGui/private/qguiapplication_p.h"
-#include <private/qwindowcontainer_p.h>
-
-#include <qpa/qplatformcursor.h>
-#include <QtGui/QGuiApplication>
-#include <QtGui/QScreen>
-#include <QtCore/QMargins>
-
-QT_BEGIN_NAMESPACE
-
-void q_createNativeChildrenAndSetParent(const QWidget *parentWidget)
-{
-    QObjectList children = parentWidget->children();
-    for (int i = 0; i < children.size(); i++) {
-        if (children.at(i)->isWidgetType()) {
-            const QWidget *childWidget = qobject_cast<const QWidget *>(children.at(i));
-            if (childWidget) { // should not be necessary
-                if (childWidget->testAttribute(Qt::WA_NativeWindow)) {
-                    if (!childWidget->internalWinId())
-                        childWidget->winId();
-                    if (childWidget->windowHandle()) {
-                        QWindow *parentWindow = childWidget->nativeParentWidget()->windowHandle();
-                        if (childWidget->isWindow())
-                            childWidget->windowHandle()->setTransientParent(parentWindow);
-                        else
-                            childWidget->windowHandle()->setParent(parentWindow);
-                    }
-                } else {
-                    q_createNativeChildrenAndSetParent(childWidget);
-                }
-            }
-        }
-    }
-
-}
-
-void QWidgetPrivate::create_sys(WId window, bool initializeWindow, bool destroyOldWindow)
-{
-    Q_Q(QWidget);
-
-    Q_UNUSED(window);
-    Q_UNUSED(initializeWindow);
-    Q_UNUSED(destroyOldWindow);
-
-    Qt::WindowFlags flags = data.window_flags;
-
-    if (!q->testAttribute(Qt::WA_NativeWindow) && !q->isWindow())
-        return; // we only care about real toplevels
-
-    QWindow *win = topData()->window;
-    // topData() ensures the extra is created but does not ensure 'window' is non-null
-    // in case the extra was already valid.
-    if (!win) {
-        createTLSysExtra();
-        win = topData()->window;
-    }
-
-    foreach (const QByteArray &propertyName, q->dynamicPropertyNames()) {
-        if (!qstrncmp(propertyName, "_q_platform_", 12))
-            win->setProperty(propertyName, q->property(propertyName));
-    }
-
-#ifdef Q_OS_OSX
-    if (q->testAttribute(Qt::WA_ShowWithoutActivating))
-        win->setProperty("_q_showWithoutActivating", QVariant(true));
-#endif
-    win->setFlags(data.window_flags);
-    fixPosIncludesFrame();
-    if (q->testAttribute(Qt::WA_Moved)
-        || !QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::WindowManagement))
-        win->setGeometry(q->geometry());
-    else
-        win->resize(q->size());
-    win->setScreen(QGuiApplication::screens().value(topData()->screenIndex, 0));
-
-    QSurfaceFormat format = win->requestedFormat();
-    if ((flags & Qt::Window) && win->surfaceType() != QSurface::OpenGLSurface
-            && q->testAttribute(Qt::WA_TranslucentBackground)) {
-        format.setAlphaBufferSize(8);
-    }
-    win->setFormat(format);
-
-    if (QWidget *nativeParent = q->nativeParentWidget()) {
-        if (nativeParent->windowHandle()) {
-            if (flags & Qt::Window) {
-                win->setTransientParent(nativeParent->window()->windowHandle());
-                win->setParent(0);
-            } else {
-                win->setTransientParent(0);
-                win->setParent(nativeParent->windowHandle());
-            }
-        }
-    }
-
-    qt_window_private(win)->positionPolicy = topData()->posIncludesFrame ?
-        QWindowPrivate::WindowFrameInclusive : QWindowPrivate::WindowFrameExclusive;
-    win->create();
-    // Enable nonclient-area events for QDockWidget and other NonClientArea-mouse event processing.
-    if ((flags & Qt::Desktop) == Qt::Window)
-        win->handle()->setFrameStrutEventsEnabled(true);
-
-    data.window_flags = win->flags();
-
-    QBackingStore *store = q->backingStore();
-
-    if (!store) {
-        if (win && q->windowType() != Qt::Desktop) {
-            if (q->isTopLevel())
-                q->setBackingStore(new QBackingStore(win));
-        } else {
-            q->setAttribute(Qt::WA_PaintOnScreen, true);
-        }
-    }
-
-    setWindowModified_helper();
-    WId id = win->winId();
-    // See the QPlatformWindow::winId() documentation
-    Q_ASSERT(id != WId(0));
-    setWinId(id);
-
-    // Check children and create windows for them if necessary
-    q_createNativeChildrenAndSetParent(q);
-
-    if (extra && !extra->mask.isEmpty())
-        setMask_sys(extra->mask);
-
-    // If widget is already shown, set window visible, too
-    if (q->isVisible())
-        win->setVisible(true);
-}
-
-void QWidget::destroy(bool destroyWindow, bool destroySubWindows)
-{
-    Q_D(QWidget);
-
-    d->aboutToDestroy();
-    if (!isWindow() && parentWidget())
-        parentWidget()->d_func()->invalidateBuffer(d->effectiveRectFor(geometry()));
-    d->deactivateWidgetCleanup();
-
-    if ((windowType() == Qt::Popup) && qApp)
-        qApp->d_func()->closePopup(this);
-
-    if (this == QApplicationPrivate::active_window)
-        QApplication::setActiveWindow(0);
-    if (QWidget::mouseGrabber() == this)
-        releaseMouse();
-    if (QWidget::keyboardGrabber() == this)
-        releaseKeyboard();
-
-    setAttribute(Qt::WA_WState_Created, false);
-
-    if (windowType() != Qt::Desktop) {
-        if (destroySubWindows) {
-            QObjectList childList(children());
-            for (int i = 0; i < childList.size(); i++) {
-                QWidget *widget = qobject_cast<QWidget *>(childList.at(i));
-                if (widget && widget->testAttribute(Qt::WA_NativeWindow)) {
-                    if (widget->windowHandle()) {
-                        widget->destroy();
-                    }
-                }
-            }
-        }
-        if (destroyWindow) {
-            d->deleteTLSysExtra();
-        } else {
-            if (parentWidget() && parentWidget()->testAttribute(Qt::WA_WState_Created)) {
-                d->hide_sys();
-            }
-        }
-
-        d->setWinId(0);
-    }
-}
-
-void QWidgetPrivate::setParent_sys(QWidget *newparent, Qt::WindowFlags f)
-{
-    Q_Q(QWidget);
-
-    Qt::WindowFlags oldFlags = data.window_flags;
-    bool wasCreated = q->testAttribute(Qt::WA_WState_Created);
-
-    int targetScreen = -1;
-    // Handle a request to move the widget to a particular screen
-    if (newparent && newparent->windowType() == Qt::Desktop) {
-        // make sure the widget is created on the same screen as the
-        // programmer specified desktop widget
-
-        // get the desktop's screen number
-        targetScreen = newparent->window()->d_func()->topData()->screenIndex;
-        newparent = 0;
-    }
-
-    setWinId(0);
-
-    if (parent != newparent) {
-        QObjectPrivate::setParent_helper(newparent); //### why does this have to be done in the _sys function???
-        if (q->windowHandle()) {
-            q->windowHandle()->setFlags(f);
-            QWidget *parentWithWindow =
-                newparent ? (newparent->windowHandle() ? newparent : newparent->nativeParentWidget()) : 0;
-            if (parentWithWindow) {
-                if (f & Qt::Window) {
-                    q->windowHandle()->setTransientParent(parentWithWindow->windowHandle());
-                    q->windowHandle()->setParent(0);
-                } else {
-                    q->windowHandle()->setTransientParent(0);
-                    q->windowHandle()->setParent(parentWithWindow->windowHandle());
-                }
-            } else {
-                q->windowHandle()->setTransientParent(0);
-                q->windowHandle()->setParent(0);
-            }
-        }
-    }
-
-    if (!newparent) {
-        f |= Qt::Window;
-        if (targetScreen == -1) {
-            if (parent)
-                targetScreen = q->parentWidget()->window()->d_func()->topData()->screenIndex;
-        }
-    }
-
-    bool explicitlyHidden = q->testAttribute(Qt::WA_WState_Hidden) && q->testAttribute(Qt::WA_WState_ExplicitShowHide);
-
-    // Reparenting toplevel to child
-    if (wasCreated && !(f & Qt::Window) && (oldFlags & Qt::Window) && !q->testAttribute(Qt::WA_NativeWindow)) {
-        if (extra && extra->hasWindowContainer)
-            QWindowContainer::toplevelAboutToBeDestroyed(q);
-
-        QWindow *newParentWindow = newparent->windowHandle();
-        if (!newParentWindow)
-            if (QWidget *npw = newparent->nativeParentWidget())
-                newParentWindow = npw->windowHandle();
-
-        Q_FOREACH (QObject *child, q->windowHandle()->children()) {
-            QWindow *childWindow = qobject_cast<QWindow *>(child);
-            if (!childWindow)
-                continue;
-
-            QWidgetWindow *childWW = qobject_cast<QWidgetWindow *>(childWindow);
-            QWidget *childWidget = childWW ? childWW->widget() : 0;
-            if (!childWW || (childWidget && childWidget->testAttribute(Qt::WA_NativeWindow)))
-                childWindow->setParent(newParentWindow);
-        }
-        q->destroy();
-    }
-
-    adjustFlags(f, q);
-    data.window_flags = f;
-    q->setAttribute(Qt::WA_WState_Created, false);
-    q->setAttribute(Qt::WA_WState_Visible, false);
-    q->setAttribute(Qt::WA_WState_Hidden, false);
-
-    if (newparent && wasCreated && (q->testAttribute(Qt::WA_NativeWindow) || (f & Qt::Window)))
-        q->createWinId();
-
-    if (q->isWindow() || (!newparent || newparent->isVisible()) || explicitlyHidden)
-        q->setAttribute(Qt::WA_WState_Hidden);
-    q->setAttribute(Qt::WA_WState_ExplicitShowHide, explicitlyHidden);
-
-    // move the window to the selected screen
-    if (!newparent && targetScreen != -1) {
-        if (maybeTopData())
-            maybeTopData()->screenIndex = targetScreen;
-        // only if it is already created
-        if (q->testAttribute(Qt::WA_WState_Created)) {
-            q->windowHandle()->setScreen(QGuiApplication::screens().value(targetScreen, 0));
-        }
-    }
-}
-
-QPoint QWidget::mapToGlobal(const QPoint &pos) const
-{
-    int x = pos.x(), y = pos.y();
-    const QWidget *w = this;
-    while (w) {
-        QWindow *window = w->windowHandle();
-        if (window && window->handle())
-            return window->mapToGlobal(QPoint(x, y));
-
-        x += w->data->crect.x();
-        y += w->data->crect.y();
-        w = w->isWindow() ? 0 : w->parentWidget();
-    }
-    return QPoint(x, y);
-}
-
-QPoint QWidget::mapFromGlobal(const QPoint &pos) const
-{
-    int x = pos.x(), y = pos.y();
-    const QWidget *w = this;
-    while (w) {
-        QWindow *window = w->windowHandle();
-        if (window && window->handle())
-            return window->mapFromGlobal(QPoint(x, y));
-
-        x -= w->data->crect.x();
-        y -= w->data->crect.y();
-        w = w->isWindow() ? 0 : w->parentWidget();
-    }
-    return QPoint(x, y);
-}
-
-void QWidgetPrivate::updateSystemBackground() {}
-
-#ifndef QT_NO_CURSOR
-void QWidgetPrivate::setCursor_sys(const QCursor &cursor)
-{
-    Q_UNUSED(cursor);
-    Q_Q(QWidget);
-    qt_qpa_set_cursor(q, false);
-}
-
-void QWidgetPrivate::unsetCursor_sys()
-{
-    Q_Q(QWidget);
-    qt_qpa_set_cursor(q, false);
-}
-
-#endif //QT_NO_CURSOR
-
-void QWidgetPrivate::setWindowTitle_sys(const QString &caption)
-{
-    Q_Q(QWidget);
-    if (!q->isWindow())
-        return;
-
-    if (QWindow *window = q->windowHandle())
-        window->setTitle(caption);
-
-}
-
-void QWidgetPrivate::setWindowFilePath_sys(const QString &filePath)
-{
-    Q_Q(QWidget);
-    if (!q->isWindow())
-        return;
-
-    if (QWindow *window = q->windowHandle())
-        window->setFilePath(filePath);
-}
-
-void QWidgetPrivate::setWindowIcon_sys()
-{
-    Q_Q(QWidget);
-    if (QWindow *window = q->windowHandle())
-        window->setIcon(q->windowIcon());
-}
-
-void QWidgetPrivate::setWindowIconText_sys(const QString &iconText)
-{
-    Q_UNUSED(iconText);
-}
-
-QWidget *qt_pressGrab = 0;
-QWidget *qt_mouseGrb = 0;
-static QWidget *keyboardGrb = 0;
-
-static inline QWindow *grabberWindow(const QWidget *w)
-{
-    QWindow *window = w->windowHandle();
-    if (!window)
-        if (const QWidget *nativeParent = w->nativeParentWidget())
-            window = nativeParent->windowHandle();
-    return window;
-}
-
-void QWidget::grabMouse()
-{
-    if (qt_mouseGrb)
-        qt_mouseGrb->releaseMouse();
-
-    if (QWindow *window = grabberWindow(this))
-        window->setMouseGrabEnabled(true);
-
-    qt_mouseGrb = this;
-    qt_pressGrab = 0;
-}
-
-#ifndef QT_NO_CURSOR
-void QWidget::grabMouse(const QCursor &cursor)
-{
-    Q_UNUSED(cursor);
-    grabMouse();
-}
-#endif
-
-bool QWidgetPrivate::stealMouseGrab(bool grab)
-{
-    // This is like a combination of grab/releaseMouse() but with error checking
-    // and it has no effect on the result of mouseGrabber().
-    Q_Q(QWidget);
-    QWindow *window = grabberWindow(q);
-    return window ? window->setMouseGrabEnabled(grab) : false;
-}
-
-void QWidget::releaseMouse()
-{
-    if (qt_mouseGrb == this) {
-        if (QWindow *window = grabberWindow(this))
-            window->setMouseGrabEnabled(false);
-        qt_mouseGrb = 0;
-    }
-}
-
-void QWidget::grabKeyboard()
-{
-    if (keyboardGrb)
-        keyboardGrb->releaseKeyboard();
-    if (QWindow *window = grabberWindow(this))
-        window->setKeyboardGrabEnabled(true);
-    keyboardGrb = this;
-}
-
-bool QWidgetPrivate::stealKeyboardGrab(bool grab)
-{
-    // This is like a combination of grab/releaseKeyboard() but with error
-    // checking and it has no effect on the result of keyboardGrabber().
-    Q_Q(QWidget);
-    QWindow *window = grabberWindow(q);
-    return window ? window->setKeyboardGrabEnabled(grab) : false;
-}
-
-void QWidget::releaseKeyboard()
-{
-    if (keyboardGrb == this) {
-        if (QWindow *window = grabberWindow(this))
-            window->setKeyboardGrabEnabled(false);
-        keyboardGrb = 0;
-    }
-}
-
-QWidget *QWidget::mouseGrabber()
-{
-    if (qt_mouseGrb)
-        return qt_mouseGrb;
-    return qt_pressGrab;
-}
-
-QWidget *QWidget::keyboardGrabber()
-{
-    return keyboardGrb;
-}
-
-void QWidget::activateWindow()
-{
-    QWindow *const wnd = window()->windowHandle();
-
-    if (wnd)
-        wnd->requestActivate();
-}
-
-// move() was invoked with Qt::WA_WState_Created not set (frame geometry
-// unknown), that is, crect has a position including the frame.
-// If we can determine the frame strut, fix that and clear the flag.
-void QWidgetPrivate::fixPosIncludesFrame()
-{
-    Q_Q(QWidget);
-    if (QTLWExtra *te = maybeTopData()) {
-        if (te->posIncludesFrame) {
-            // For Qt::WA_DontShowOnScreen, assume a frame of 0 (for
-            // example, in QGraphicsProxyWidget).
-            if (q->testAttribute(Qt::WA_DontShowOnScreen)) {
-                te->posIncludesFrame = 0;
-            } else {
-                if (q->windowHandle()) {
-                    updateFrameStrut();
-                    if (!q->data->fstrut_dirty) {
-                        data.crect.translate(te->frameStrut.x(), te->frameStrut.y());
-                        te->posIncludesFrame = 0;
-                    }
-                } // windowHandle()
-            } // !WA_DontShowOnScreen
-        } // posIncludesFrame
-    } // QTLWExtra
-}
-
-void QWidgetPrivate::show_sys()
-{
-    Q_Q(QWidget);
-
-    QWindow *window = q->windowHandle();
-
-    if (q->testAttribute(Qt::WA_DontShowOnScreen)) {
-        invalidateBuffer(q->rect());
-        q->setAttribute(Qt::WA_Mapped);
-        if (q->isWindow() && q->windowModality() != Qt::NonModal && window) {
-            // add our window to the modal window list
-            QGuiApplicationPrivate::showModalWindow(window);
-        }
-        return;
-    }
-
-    if (renderToTexture && !q->isWindow())
-        QApplication::postEvent(q->parentWidget(), new QUpdateLaterEvent(q->geometry()));
-    else
-        QApplication::postEvent(q, new QUpdateLaterEvent(q->rect()));
-
-    if (!q->isWindow() && !q->testAttribute(Qt::WA_NativeWindow))
-        return;
-
-    if (window) {
-        if (q->isWindow())
-            fixPosIncludesFrame();
-        QRect geomRect = q->geometry();
-        if (!q->isWindow()) {
-            QPoint topLeftOfWindow = q->mapTo(q->nativeParentWidget(),QPoint());
-            geomRect.moveTopLeft(topLeftOfWindow);
-        }
-        const QRect windowRect = window->geometry();
-        if (windowRect != geomRect) {
-            if (q->testAttribute(Qt::WA_Moved)
-                || !QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::WindowManagement))
-                window->setGeometry(geomRect);
-            else
-                window->resize(geomRect.size());
-        }
-
-#ifndef QT_NO_CURSOR
-        qt_qpa_set_cursor(q, false); // Needed in case cursor was set before show
-#endif
-        invalidateBuffer(q->rect());
-        window->setVisible(true);
-        // Was the window moved by the Window system or QPlatformWindow::initialGeometry() ?
-        if (window->isTopLevel()) {
-            const QPoint crectTopLeft = q->data->crect.topLeft();
-            const QPoint windowTopLeft = window->geometry().topLeft();
-            if (crectTopLeft == QPoint(0, 0) && windowTopLeft != crectTopLeft)
-                q->data->crect.moveTopLeft(windowTopLeft);
-        }
-    }
-}
-
-
-void QWidgetPrivate::hide_sys()
-{
-    Q_Q(QWidget);
-
-    QWindow *window = q->windowHandle();
-
-    if (q->testAttribute(Qt::WA_DontShowOnScreen)) {
-        q->setAttribute(Qt::WA_Mapped, false);
-        if (q->isWindow() && q->windowModality() != Qt::NonModal && window) {
-            // remove our window from the modal window list
-            QGuiApplicationPrivate::hideModalWindow(window);
-        }
-        // do not return here, if window non-zero, we must hide it
-    }
-
-    deactivateWidgetCleanup();
-
-    if (!q->isWindow()) {
-        QWidget *p = q->parentWidget();
-        if (p &&p->isVisible()) {
-            if (renderToTexture)
-                p->d_func()->invalidateBuffer(q->geometry());
-            else
-                invalidateBuffer(q->rect());
-        }
-    } else {
-        invalidateBuffer(q->rect());
-    }
-
-    if (window)
-        window->setVisible(false);
-}
-
-Qt::WindowState effectiveState(Qt::WindowStates state)
- {
-     if (state & Qt::WindowMinimized)
-         return Qt::WindowMinimized;
-     else if (state & Qt::WindowFullScreen)
-         return Qt::WindowFullScreen;
-     else if (state & Qt::WindowMaximized)
-         return Qt::WindowMaximized;
-     return Qt::WindowNoState;
- }
-
-void QWidget::setWindowState(Qt::WindowStates newstate)
-{
-    Q_D(QWidget);
-    Qt::WindowStates oldstate = windowState();
-    if (oldstate == newstate)
-        return;
-    if (isWindow() && !testAttribute(Qt::WA_WState_Created))
-        create();
-
-    data->window_state = newstate;
-    data->in_set_window_state = 1;
-    Qt::WindowState newEffectiveState = effectiveState(newstate);
-    Qt::WindowState oldEffectiveState = effectiveState(oldstate);
-    if (isWindow() && newEffectiveState != oldEffectiveState) {
-        // Ensure the initial size is valid, since we store it as normalGeometry below.
-        if (!testAttribute(Qt::WA_Resized) && !isVisible())
-            adjustSize();
-
-        d->createTLExtra();
-        if (oldEffectiveState == Qt::WindowNoState)
-            d->topData()->normalGeometry = geometry();
-
-        Q_ASSERT(windowHandle());
-        windowHandle()->setWindowState(newEffectiveState);
-    }
-    data->in_set_window_state = 0;
-
-    if (newstate & Qt::WindowActive)
-        activateWindow();
-
-    QWindowStateChangeEvent e(oldstate);
-    QApplication::sendEvent(this, &e);
-}
-
-void QWidgetPrivate::setFocus_sys()
-{
-    Q_Q(QWidget);
-    // Embedded native widget may have taken the focus; get it back to toplevel if that is the case
-    const QWidget *topLevel = q->window();
-    if (topLevel->windowType() != Qt::Popup) {
-        if (QWindow *nativeWindow = q->window()->windowHandle()) {
-            if (nativeWindow != QGuiApplication::focusWindow()
-                && q->testAttribute(Qt::WA_WState_Created)) {
-                nativeWindow->requestActivate();
-            }
-        }
-    }
-}
-
-void QWidgetPrivate::raise_sys()
-{
-    Q_Q(QWidget);
-    if (q->isWindow() || q->testAttribute(Qt::WA_NativeWindow)) {
-        q->windowHandle()->raise();
-    } else if (renderToTexture) {
-        if (QWidget *p = q->parentWidget()) {
-            setDirtyOpaqueRegion();
-            p->d_func()->invalidateBuffer(effectiveRectFor(q->geometry()));
-        }
-    }
-}
-
-void QWidgetPrivate::lower_sys()
-{
-    Q_Q(QWidget);
-    if (q->isWindow() || q->testAttribute(Qt::WA_NativeWindow)) {
-        Q_ASSERT(q->testAttribute(Qt::WA_WState_Created));
-        q->windowHandle()->lower();
-    } else if (QWidget *p = q->parentWidget()) {
-        setDirtyOpaqueRegion();
-        p->d_func()->invalidateBuffer(effectiveRectFor(q->geometry()));
-    }
-}
-
-void QWidgetPrivate::stackUnder_sys(QWidget*)
-{
-    Q_Q(QWidget);
-    if (QWidget *p = q->parentWidget()) {
-        setDirtyOpaqueRegion();
-        p->d_func()->invalidateBuffer(effectiveRectFor(q->geometry()));
-    }
-}
-
-void QWidgetPrivate::setGeometry_sys(int x, int y, int w, int h, bool isMove)
-{
-    Q_Q(QWidget);
-    if (extra) {                                // any size restrictions?
-        w = qMin(w,extra->maxw);
-        h = qMin(h,extra->maxh);
-        w = qMax(w,extra->minw);
-        h = qMax(h,extra->minh);
-    }
-
-    if (q->isWindow() && q->windowHandle()) {
-        QPlatformIntegration *integration = QGuiApplicationPrivate::platformIntegration();
-        if (!integration->hasCapability(QPlatformIntegration::NonFullScreenWindows)) {
-            x = 0;
-            y = 0;
-            w = q->windowHandle()->width();
-            h = q->windowHandle()->height();
-        }
-    }
-
-    QPoint oldp = q->geometry().topLeft();
-    QSize olds = q->size();
-    QRect r(x, y, w, h);
-
-    bool isResize = olds != r.size();
-    isMove = oldp != r.topLeft(); //### why do we have isMove as a parameter?
-
-
-    // We only care about stuff that changes the geometry, or may
-    // cause the window manager to change its state
-    if (r.size() == olds && oldp == r.topLeft())
-        return;
-
-    if (!data.in_set_window_state) {
-        q->data->window_state &= ~Qt::WindowMaximized;
-        q->data->window_state &= ~Qt::WindowFullScreen;
-        if (q->isWindow())
-            topData()->normalGeometry = QRect(0, 0, -1, -1);
-    }
-
-    QPoint oldPos = q->pos();
-    data.crect = r;
-
-    bool needsShow = false;
-
-    if (!(data.window_state & Qt::WindowFullScreen) && (w == 0 || h == 0)) {
-        q->setAttribute(Qt::WA_OutsideWSRange, true);
-        if (q->isVisible() && q->testAttribute(Qt::WA_Mapped))
-            hide_sys();
-        data.crect = QRect(x, y, w, h);
-    } else if (q->isVisible() && q->testAttribute(Qt::WA_OutsideWSRange)) {
-        q->setAttribute(Qt::WA_OutsideWSRange, false);
-        needsShow = true;
-    }
-
-    if (q->isVisible()) {
-        if (!q->testAttribute(Qt::WA_DontShowOnScreen) && !q->testAttribute(Qt::WA_OutsideWSRange)) {
-            if (q->windowHandle()) {
-                if (q->isWindow()) {
-                    q->windowHandle()->setGeometry(q->geometry());
-                } else {
-                    QPoint posInNativeParent =  q->mapTo(q->nativeParentWidget(),QPoint());
-                    q->windowHandle()->setGeometry(QRect(posInNativeParent,r.size()));
-                }
-
-                if (needsShow)
-                    show_sys();
-            }
-
-            if (!q->isWindow()) {
-                if (renderToTexture) {
-                    QRegion updateRegion(q->geometry());
-                    updateRegion += QRect(oldPos, olds);
-                    q->parentWidget()->d_func()->invalidateBuffer(updateRegion);
-                } else if (isMove && !isResize) {
-                    moveRect(QRect(oldPos, olds), x - oldPos.x(), y - oldPos.y());
-                } else {
-                    invalidateBuffer_resizeHelper(oldPos, olds);
-                }
-            }
-        }
-
-        // generate a move event for QWidgets without window handles. QWidgets with native
-        // window handles already receive a move event from
-        // QGuiApplicationPrivate::processGeometryChangeEvent.
-        if (isMove && (!q->windowHandle() || q->testAttribute(Qt::WA_DontShowOnScreen))) {
-            QMoveEvent e(q->pos(), oldPos);
-            QApplication::sendEvent(q, &e);
-        }
-        if (isResize) {
-            QResizeEvent e(r.size(), olds);
-            QApplication::sendEvent(q, &e);
-            if (q->windowHandle())
-                q->update();
-        }
-    } else { // not visible
-        if (isMove && q->pos() != oldPos)
-            q->setAttribute(Qt::WA_PendingMoveEvent, true);
-        if (isResize)
-            q->setAttribute(Qt::WA_PendingResizeEvent, true);
-    }
-
-}
-
-void QWidgetPrivate::setConstraints_sys()
-{
-    Q_Q(QWidget);
-    if (extra && q->windowHandle()) {
-        QWindow *win = q->windowHandle();
-        QWindowPrivate *winp = qt_window_private(win);
-
-        winp->minimumSize = QSize(extra->minw, extra->minh);
-        winp->maximumSize = QSize(extra->maxw, extra->maxh);
-
-        if (extra->topextra) {
-            winp->baseSize = QSize(extra->topextra->basew, extra->topextra->baseh);
-            winp->sizeIncrement = QSize(extra->topextra->incw, extra->topextra->inch);
-        }
-
-        if (winp->platformWindow) {
-            fixPosIncludesFrame();
-            winp->platformWindow->propagateSizeHints();
-        }
-    }
-}
-
-void QWidgetPrivate::scroll_sys(int dx, int dy)
-{
-    Q_Q(QWidget);
-    scrollChildren(dx, dy);
-    scrollRect(q->rect(), dx, dy);
-}
-
-void QWidgetPrivate::scroll_sys(int dx, int dy, const QRect &r)
-{
-    scrollRect(r, dx, dy);
-}
-
-int QWidget::metric(PaintDeviceMetric m) const
-{
-    Q_D(const QWidget);
-
-    QWindow *topLevelWindow = 0;
-    QScreen *screen = 0;
-    if (QWidget *topLevel = window())
-        topLevelWindow = topLevel->windowHandle();
-
-    if (topLevelWindow) {
-        QPlatformScreen *platformScreen = QPlatformScreen::platformScreenForWindow(topLevelWindow);
-        if (platformScreen)
-            screen = platformScreen->screen();
-    }
-    if (!screen && QGuiApplication::primaryScreen())
-        screen = QGuiApplication::primaryScreen();
-
-    if (!screen) {
-        if (m == PdmDpiX || m == PdmDpiY)
-              return 72;
-        return QPaintDevice::metric(m);
-    }
-    int val;
-    if (m == PdmWidth) {
-        val = data->crect.width();
-    } else if (m == PdmWidthMM) {
-        val = data->crect.width() * screen->physicalSize().width() / screen->geometry().width();
-    } else if (m == PdmHeight) {
-        val = data->crect.height();
-    } else if (m == PdmHeightMM) {
-        val = data->crect.height() * screen->physicalSize().height() / screen->geometry().height();
-    } else if (m == PdmDepth) {
-        return screen->depth();
-    } else if (m == PdmDpiX) {
-        if (d->extra && d->extra->customDpiX)
-            return d->extra->customDpiX;
-        else if (d->parent)
-            return static_cast<QWidget *>(d->parent)->metric(m);
-        return qRound(screen->logicalDotsPerInchX());
-    } else if (m == PdmDpiY) {
-        if (d->extra && d->extra->customDpiY)
-            return d->extra->customDpiY;
-        else if (d->parent)
-            return static_cast<QWidget *>(d->parent)->metric(m);
-        return qRound(screen->logicalDotsPerInchY());
-    } else if (m == PdmPhysicalDpiX) {
-        return qRound(screen->physicalDotsPerInchX());
-    } else if (m == PdmPhysicalDpiY) {
-        return qRound(screen->physicalDotsPerInchY());
-    } else if (m == PdmDevicePixelRatio) {
-        return topLevelWindow ? topLevelWindow->devicePixelRatio() : qApp->devicePixelRatio();
-    } else {
-        val = QPaintDevice::metric(m);// XXX
-    }
-    return val;
-}
-
-/*!
-    If this is a native widget, return the associated QWindow.
-    Otherwise return null.
-
-    Native widgets include toplevel widgets, QGLWidget, and child widgets
-    on which winId() was called.
-
-    \since 5.0
-
-    \sa winId()
-*/
-QWindow *QWidget::windowHandle() const
-{
-    Q_D(const QWidget);
-    QTLWExtra *extra = d->maybeTopData();
-    if (extra)
-        return extra->window;
-
-    return 0;
-}
-
-void QWidgetPrivate::createSysExtra()
-{
-}
-
-void QWidgetPrivate::deleteSysExtra()
-{
-
-}
-
-#ifdef Q_OS_WIN
-static const char activeXNativeParentHandleProperty[] = "_q_embedded_native_parent_handle";
-#endif
-
-void QWidgetPrivate::createTLSysExtra()
-{
-    Q_Q(QWidget);
-    if (!extra->topextra->window && (q->testAttribute(Qt::WA_NativeWindow) || q->isWindow())) {
-        extra->topextra->window = new QWidgetWindow(q);
-        if (extra->minw || extra->minh)
-            extra->topextra->window->setMinimumSize(QSize(extra->minw, extra->minh));
-        if (extra->maxw != QWIDGETSIZE_MAX || extra->maxh != QWIDGETSIZE_MAX)
-            extra->topextra->window->setMaximumSize(QSize(extra->maxw, extra->maxh));
-        if (extra->topextra->opacity != 255 && q->isWindow())
-            extra->topextra->window->setOpacity(qreal(extra->topextra->opacity) / qreal(255));
-#ifdef Q_OS_WIN
-        // Pass on native parent handle for Widget embedded into Active X.
-        const QVariant activeXNativeParentHandle = q->property(activeXNativeParentHandleProperty);
-        if (activeXNativeParentHandle.isValid())
-            extra->topextra->window->setProperty(activeXNativeParentHandleProperty, activeXNativeParentHandle);
-        if (q->inherits("QTipLabel") || q->inherits("QAlphaWidget"))
-            extra->topextra->window->setProperty("_q_windowsDropShadow", QVariant(true));
-#endif
-    }
-
-}
-
-void QWidgetPrivate::deleteTLSysExtra()
-{
-    if (extra && extra->topextra) {
-        //the qplatformbackingstore may hold a reference to the window, so the backingstore
-        //needs to be deleted first. If the backingstore holds GL resources, we need to
-        // make the context current here, since the platform bs does not have a reference
-        // to the widget.
-
-#ifndef QT_NO_OPENGL
-        if (textureChildSeen && extra->topextra->shareContext)
-            extra->topextra->shareContext->makeCurrent(extra->topextra->window);
-#endif
-        extra->topextra->backingStoreTracker.destroy();
-        delete extra->topextra->backingStore;
-        extra->topextra->backingStore = 0;
-#ifndef QT_NO_OPENGL
-        if (textureChildSeen && extra->topextra->shareContext)
-            extra->topextra->shareContext->doneCurrent();
-        delete extra->topextra->shareContext;
-        extra->topextra->shareContext = 0;
-#endif
-
-        //the toplevel might have a context with a "qglcontext associated with it. We need to
-        //delete the qglcontext before we delete the qplatformopenglcontext.
-        //One unfortunate thing about this is that we potentially create a glContext just to
-        //delete it straight afterwards.
-        if (extra->topextra->window) {
-            extra->topextra->window->destroy();
-        }
-        setWinId(0);
-        delete extra->topextra->window;
-        extra->topextra->window = 0;
-
-    }
-}
-
-void QWidgetPrivate::registerDropSite(bool on)
-{
-    Q_UNUSED(on);
-}
-
-void QWidgetPrivate::setMask_sys(const QRegion &region)
-{
-    if (!QGuiApplicationPrivate::platformIntegration()->hasCapability(QPlatformIntegration::WindowMasks)) {
-        qWarning("%s: Not supported on %s.", Q_FUNC_INFO, qPrintable(QGuiApplication::platformName()));
-        return;
-    }
-    Q_Q(QWidget);
-    if (const QWindow *window = q->windowHandle())
-        if (QPlatformWindow *platformWindow = window->handle())
-            platformWindow->setMask(region);
-}
-
-void QWidgetPrivate::updateFrameStrut()
-{
-    Q_Q(QWidget);
-    if (q->data->fstrut_dirty) {
-        if (QTLWExtra *te = maybeTopData()) {
-            if (te->window) {
-                if (const QPlatformWindow *pw = te->window->handle()) {
-                    const QMargins margins = pw->frameMargins();
-                    if (!margins.isNull()) {
-                        te->frameStrut.setCoords(margins.left(), margins.top(), margins.right(), margins.bottom());
-                        q->data->fstrut_dirty = false;
-                    }
-                }
-            }
-        }
-    }
-}
-
-void QWidgetPrivate::setWindowOpacity_sys(qreal level)
-{
-    Q_Q(QWidget);
-    if (q->windowHandle())
-        q->windowHandle()->setOpacity(level);
-}
-
-void QWidgetPrivate::setWSGeometry()
-{
-    Q_Q(QWidget);
-    if (QWindow *window = q->windowHandle())
-        window->setGeometry(data.crect);
-}
-
-QPaintEngine *QWidget::paintEngine() const
-{
-    qWarning("QWidget::paintEngine: Should no longer be called");
-
-#ifdef Q_OS_WIN
-    // We set this bit which is checked in setAttribute for
-    // Qt::WA_PaintOnScreen. We do this to allow these two scenarios:
-    //
-    // 1. Users accidentally set Qt::WA_PaintOnScreen on X and port to
-    // Windows which would mean suddenly their widgets stop working.
-    //
-    // 2. Users set paint on screen and subclass paintEngine() to
-    // return 0, in which case we have a "hole" in the backingstore
-    // allowing use of GDI or DirectX directly.
-    //
-    // 1 is WRONG, but to minimize silent failures, we have set this
-    // bit to ignore the setAttribute call. 2. needs to be
-    // supported because its our only means of embedding native
-    // graphics stuff.
-    const_cast<QWidgetPrivate *>(d_func())->noPaintOnScreen = 1;
-#endif
-
-    return 0; //##### @@@
-}
-
-void QWidgetPrivate::setModal_sys()
-{
-    Q_Q(QWidget);
-    if (q->windowHandle())
-        q->windowHandle()->setModality(q->windowModality());
-}
-
-#ifndef QT_NO_CURSOR
-static inline void applyCursor(QWidget *w, QCursor c)
-{
-    if (QWindow *window = w->windowHandle())
-        window->setCursor(c);
-}
-
-static inline void unsetCursor(QWidget *w)
-{
-    if (QWindow *window = w->windowHandle())
-        window->unsetCursor();
-}
-
-void qt_qpa_set_cursor(QWidget *w, bool force)
-{
-    if (!w->testAttribute(Qt::WA_WState_Created))
-        return;
-
-    static QPointer<QWidget> lastUnderMouse = 0;
-    if (force) {
-        lastUnderMouse = w;
-    } else if (lastUnderMouse) {
-        const WId lastWinId = lastUnderMouse->effectiveWinId();
-        const WId winId = w->effectiveWinId();
-        if (lastWinId && lastWinId == winId)
-            w = lastUnderMouse;
-    } else if (!w->internalWinId()) {
-        return; // The mouse is not under this widget, and it's not native, so don't change it.
-    }
-
-    while (!w->internalWinId() && w->parentWidget() && !w->isWindow()
-           && !w->testAttribute(Qt::WA_SetCursor))
-        w = w->parentWidget();
-
-    QWidget *nativeParent = w;
-    if (!w->internalWinId())
-        nativeParent = w->nativeParentWidget();
-    if (!nativeParent || !nativeParent->internalWinId())
-        return;
-
-    if (w->isWindow() || w->testAttribute(Qt::WA_SetCursor)) {
-        if (w->isEnabled())
-            applyCursor(nativeParent, w->cursor());
-        else
-            // Enforce the windows behavior of clearing the cursor on
-            // disabled widgets.
-            unsetCursor(nativeParent);
-    } else {
-        unsetCursor(nativeParent);
-    }
-}
-#endif //QT_NO_CURSOR
-
-QT_END_NAMESPACE
diff --git a/src/widgets/kernel/qwidgetaction.cpp b/src/widgets/kernel/qwidgetaction.cpp
index 7ccb4e2a5c..34370ac286 100644
--- a/src/widgets/kernel/qwidgetaction.cpp
+++ b/src/widgets/kernel/qwidgetaction.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidgetaction.h b/src/widgets/kernel/qwidgetaction.h
index 7fc24bab9b..afea8454d9 100644
--- a/src/widgets/kernel/qwidgetaction.h
+++ b/src/widgets/kernel/qwidgetaction.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidgetaction_p.h b/src/widgets/kernel/qwidgetaction_p.h
index 8f591bf320..3aece0d8d3 100644
--- a/src/widgets/kernel/qwidgetaction_p.h
+++ b/src/widgets/kernel/qwidgetaction_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidgetbackingstore.cpp b/src/widgets/kernel/qwidgetbackingstore.cpp
index 9d024fd359..00052c868f 100644
--- a/src/widgets/kernel/qwidgetbackingstore.cpp
+++ b/src/widgets/kernel/qwidgetbackingstore.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -56,6 +48,7 @@
 #include <private/qapplication_p.h>
 #include <private/qpaintengine_raster_p.h>
 #include <private/qgraphicseffect_p.h>
+#include <QtGui/private/qwindow_p.h>
 
 #include <qpa/qplatformbackingstore.h>
 
@@ -74,7 +67,8 @@ extern QRegion qt_dirtyRegion(QWidget *);
  * \a region is the region to be updated in \a widget coordinates.
  */
 void QWidgetBackingStore::qt_flush(QWidget *widget, const QRegion &region, QBackingStore *backingStore,
-                            QWidget *tlw, const QPoint &tlwOffset, QPlatformTextureList *widgetTextures)
+                                   QWidget *tlw, const QPoint &tlwOffset, QPlatformTextureList *widgetTextures,
+                                   QWidgetBackingStore *widgetBackingStore)
 {
 #ifdef QT_NO_OPENGL
     Q_UNUSED(widgetTextures);
@@ -92,33 +86,34 @@ void QWidgetBackingStore::qt_flush(QWidget *widget, const QRegion &region, QBack
         QWidgetBackingStore::showYellowThing(widget, region, flushUpdate * 10, false);
 #endif
 
-    //The performance hit by doing this should be negligible. However, be aware that
-    //using this FPS when you have > 1 windowsurface can give you inaccurate FPS
+    if (tlw->testAttribute(Qt::WA_DontShowOnScreen) || widget->testAttribute(Qt::WA_DontShowOnScreen))
+        return;
     static bool fpsDebug = qgetenv("QT_DEBUG_FPS").toInt();
     if (fpsDebug) {
-        static QTime time = QTime::currentTime();
-        static int frames = 0;
-
-        frames++;
-
-        if(time.elapsed() > 5000) {
-            double fps = double(frames * 1000) /time.restart();
-            fprintf(stderr,"FPS: %.1f\n",fps);
-            frames = 0;
+        if (!widgetBackingStore->perfFrames++)
+            widgetBackingStore->perfTime.start();
+        if (widgetBackingStore->perfTime.elapsed() > 5000) {
+            double fps = double(widgetBackingStore->perfFrames * 1000) / widgetBackingStore->perfTime.restart();
+            qDebug("FPS: %.1f\n", fps);
+            widgetBackingStore->perfFrames = 0;
         }
     }
 
-    if (tlw->testAttribute(Qt::WA_DontShowOnScreen) || widget->testAttribute(Qt::WA_DontShowOnScreen))
-        return;
-
     QPoint offset = tlwOffset;
     if (widget != tlw)
         offset += widget->mapTo(tlw, QPoint());
 
 #ifndef QT_NO_OPENGL
-    if (widgetTextures)
-        backingStore->handle()->composeAndFlush(widget->windowHandle(), region, offset, widgetTextures, tlw->d_func()->shareContext());
-    else
+    if (widgetTextures) {
+        widget->window()->d_func()->sendComposeStatus(widget->window(), false);
+        // A window may have alpha even when the app did not request
+        // WA_TranslucentBackground. Therefore the compositor needs to know whether the app intends
+        // to rely on translucency, in order to decide if it should clear to transparent or opaque.
+        const bool translucentBackground = widget->testAttribute(Qt::WA_TranslucentBackground);
+        backingStore->handle()->composeAndFlush(widget->windowHandle(), region, offset, widgetTextures,
+                                                widget->d_func()->shareContext(), translucentBackground);
+        widget->window()->d_func()->sendComposeStatus(widget->window(), true);
+    } else
 #endif
         backingStore->flush(region, widget->windowHandle(), offset);
 }
@@ -270,7 +265,7 @@ void QWidgetBackingStore::unflushPaint(QWidget *widget, const QRegion &rgn)
         return;
 
     const QPoint offset = widget->mapTo(tlw, QPoint());
-    qt_flush(widget, rgn, tlwExtra->backingStoreTracker->store, tlw, offset);
+    qt_flush(widget, rgn, tlwExtra->backingStoreTracker->store, tlw, offset, 0, tlw->d_func()->maybeBackingStore());
 }
 #endif // QT_NO_PAINT_DEBUG
 
@@ -519,6 +514,8 @@ void QWidgetBackingStore::markDirty(const QRegion &rgn, QWidget *widget,
     const QPoint offset = widget->mapTo(tlw, QPoint());
 
     if (QWidgetPrivate::get(widget)->renderToTexture) {
+        if (!widget->d_func()->inDirtyList)
+            addDirtyRenderToTextureWidget(widget);
         if (!updateRequestSent || updateTime == UpdateNow)
             sendUpdateRequest(tlw, updateTime);
         return;
@@ -613,6 +610,8 @@ void QWidgetBackingStore::markDirty(const QRect &rect, QWidget *widget,
     }
 
     if (QWidgetPrivate::get(widget)->renderToTexture) {
+        if (!widget->d_func()->inDirtyList)
+            addDirtyRenderToTextureWidget(widget);
         if (!updateRequestSent || updateTime == UpdateNow)
             sendUpdateRequest(tlw, updateTime);
         return;
@@ -710,6 +709,7 @@ void QWidgetBackingStore::removeDirtyWidget(QWidget *w)
 
     dirtyWidgetsRemoveAll(w);
     dirtyOnScreenWidgetsRemoveAll(w);
+    dirtyRenderToTextureWidgets.removeAll(w);
     resetWidget(w);
 
     QWidgetPrivate *wd = w->d_func();
@@ -744,7 +744,8 @@ QWidgetBackingStore::QWidgetBackingStore(QWidget *topLevel)
       widgetTextures(0),
       fullUpdatePending(0),
       updateRequestSent(0),
-      textureListWatcher(0)
+      textureListWatcher(0),
+      perfFrames(0)
 {
     store = tlw->backingStore();
     Q_ASSERT(store);
@@ -755,9 +756,11 @@ QWidgetBackingStore::QWidgetBackingStore(QWidget *topLevel)
 
 QWidgetBackingStore::~QWidgetBackingStore()
 {
-    for (int c = 0; c < dirtyWidgets.size(); ++c) {
+    for (int c = 0; c < dirtyWidgets.size(); ++c)
         resetWidget(dirtyWidgets.at(c));
-    }
+    for (int c = 0; c < dirtyRenderToTextureWidgets.size(); ++c)
+        resetWidget(dirtyRenderToTextureWidgets.at(c));
+
 #ifndef QT_NO_OPENGL
     delete dirtyOnScreenWidgets;
 #endif
@@ -944,7 +947,7 @@ void QWidgetBackingStore::sync(QWidget *exposedWidget, const QRegion &exposedReg
 
     // Nothing to repaint.
     if (!isDirty() && store->size().isValid()) {
-        qt_flush(exposedWidget, exposedRegion, store, tlw, tlwOffset, widgetTextures);
+        qt_flush(exposedWidget, exposedRegion, store, tlw, tlwOffset, widgetTextures, this);
         return;
     }
 
@@ -961,7 +964,8 @@ static void findTextureWidgetsRecursively(QWidget *tlw, QWidget *widget, QPlatfo
 {
     QWidgetPrivate *wd = QWidgetPrivate::get(widget);
     if (wd->renderToTexture)
-        widgetTextures->appendTexture(wd->textureId(), QRect(widget->mapTo(tlw, QPoint()), widget->size()));
+        widgetTextures->appendTexture(wd->textureId(), QRect(widget->mapTo(tlw, QPoint()), widget->size()),
+                                      widget->testAttribute(Qt::WA_AlwaysStackOnTop));
 
     for (int i = 0; i < wd->children.size(); ++i) {
         QWidget *w = qobject_cast<QWidget *>(wd->children.at(i));
@@ -1121,17 +1125,60 @@ void QWidgetBackingStore::doSync()
         widgetTextures = new QPlatformTextureList;
         findTextureWidgetsRecursively(tlw, tlw, widgetTextures);
     }
+    qt_window_private(tlw->windowHandle())->compositing = widgetTextures && !widgetTextures->isEmpty();
     fullUpdatePending = false;
 #endif
 
     if (toClean.isEmpty()) {
-        // Nothing to repaint. However, we might have newly exposed areas on the
-        // screen if this function was called from sync(QWidget *, QRegion)), so
-        // we have to make sure those are flushed.
+        // Nothing to repaint. However renderToTexture widgets are handled
+        // specially, they are not in the regular dirty list, in order to
+        // prevent triggering unnecessary backingstore painting when only the
+        // OpenGL content changes. Check if we have such widgets in the special
+        // dirty list.
+        QVarLengthArray<QWidget *, 16> paintPending;
+        for (int i = 0; i < dirtyRenderToTextureWidgets.count(); ++i) {
+            QWidget *w = dirtyRenderToTextureWidgets.at(i);
+            paintPending << w;
+            resetWidget(w);
+        }
+        dirtyRenderToTextureWidgets.clear();
+        for (int i = 0; i < paintPending.count(); ++i) {
+            QWidget *w = paintPending[i];
+            w->d_func()->sendPaintEvent(w->rect());
+        }
+
+        // We might have newly exposed areas on the screen if this function was
+        // called from sync(QWidget *, QRegion)), so we have to make sure those
+        // are flushed. We also need to composite the renderToTexture widgets.
         flush();
+
         return;
     }
 
+#ifndef QT_NO_OPENGL
+    // There is something other dirty than the renderToTexture widgets.
+    // Now it is time to include the renderToTexture ones among the others.
+    if (widgetTextures && widgetTextures->count()) {
+        for (int i = 0; i < widgetTextures->count(); ++i) {
+            const QRect rect = widgetTextures->geometry(i); // mapped to the tlw already
+            dirty += rect;
+            toClean += rect;
+        }
+    }
+#endif
+
+    // The dirtyRenderToTextureWidgets list is useless here, so just reset. As
+    // unintuitive as it is, we need to send paint events to renderToTexture
+    // widgets always when something (any widget) needs to be updated, even if
+    // the renderToTexture widget itself is clean, i.e. there was no update()
+    // call for it. This is because changing any widget will cause a flush and
+    // so a potentially blocking buffer swap for the window, and skipping paints
+    // for the renderToTexture widgets would make it impossible to have smoothly
+    // animated content in them.
+    for (int i = 0; i < dirtyRenderToTextureWidgets.count(); ++i)
+        resetWidget(dirtyRenderToTextureWidgets.at(i));
+    dirtyRenderToTextureWidgets.clear();
+
 #ifndef QT_NO_GRAPHICSVIEW
     if (tlw->d_func()->extra->proxyWidget) {
         updateStaticContentsSize();
@@ -1200,15 +1247,19 @@ void QWidgetBackingStore::flush(QWidget *widget)
 {
     if (!dirtyOnScreen.isEmpty()) {
         QWidget *target = widget ? widget : tlw;
-        qt_flush(target, dirtyOnScreen, store, tlw, tlwOffset, widgetTextures);
+        qt_flush(target, dirtyOnScreen, store, tlw, tlwOffset, widgetTextures, this);
         dirtyOnScreen = QRegion();
+#ifndef QT_NO_OPENGL
+        if (widgetTextures && widgetTextures->count())
+            return;
+#endif
     }
 
     if (!dirtyOnScreenWidgets || dirtyOnScreenWidgets->isEmpty()) {
 #ifndef QT_NO_OPENGL
         if (widgetTextures && widgetTextures->count()) {
             QWidget *target = widget ? widget : tlw;
-            qt_flush(target, QRegion(), store, tlw, tlwOffset, widgetTextures);
+            qt_flush(target, QRegion(), store, tlw, tlwOffset, widgetTextures, this);
         }
 #endif
         return;
@@ -1218,7 +1269,7 @@ void QWidgetBackingStore::flush(QWidget *widget)
         QWidget *w = dirtyOnScreenWidgets->at(i);
         QWidgetPrivate *wd = w->d_func();
         Q_ASSERT(wd->needsFlush);
-        qt_flush(w, *wd->needsFlush, store, tlw, tlwOffset);
+        qt_flush(w, *wd->needsFlush, store, tlw, tlwOffset, 0, this);
         *wd->needsFlush = QRegion();
     }
     dirtyOnScreenWidgets->clear();
diff --git a/src/widgets/kernel/qwidgetbackingstore_p.h b/src/widgets/kernel/qwidgetbackingstore_p.h
index 473e9deef4..e208a6d752 100644
--- a/src/widgets/kernel/qwidgetbackingstore_p.h
+++ b/src/widgets/kernel/qwidgetbackingstore_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -133,6 +125,7 @@ private:
     QRegion dirty; // needsRepaint
     QRegion dirtyFromPreviousSync;
     QVector<QWidget *> dirtyWidgets;
+    QVector<QWidget *> dirtyRenderToTextureWidgets;
     QVector<QWidget *> *dirtyOnScreenWidgets;
     QList<QWidget *> staticWidgets;
     QPlatformTextureList *widgetTextures;
@@ -143,6 +136,8 @@ private:
     QPoint tlwOffset;
 
     QPlatformTextureListWatcher *textureListWatcher;
+    QElapsedTimer perfTime;
+    int perfFrames;
 
     void sendUpdateRequest(QWidget *widget, UpdateTime updateTime);
 
@@ -150,7 +145,8 @@ private:
     static void unflushPaint(QWidget *widget, const QRegion &rgn);
     static void qt_flush(QWidget *widget, const QRegion &region, QBackingStore *backingStore,
                          QWidget *tlw, const QPoint &tlwOffset,
-                         QPlatformTextureList *widgetTextures = 0);
+                         QPlatformTextureList *widgetTextures,
+                         QWidgetBackingStore *widgetBackingStore);
 
     void doSync();
     bool bltRect(const QRect &rect, int dx, int dy, QWidget *widget);
@@ -184,6 +180,16 @@ private:
         }
     }
 
+    inline void addDirtyRenderToTextureWidget(QWidget *widget)
+    {
+        if (widget && !widget->d_func()->inDirtyList && !widget->data->in_destructor) {
+            QWidgetPrivate *widgetPrivate = widget->d_func();
+            Q_ASSERT(widgetPrivate->renderToTexture);
+            dirtyRenderToTextureWidgets.append(widget);
+            widgetPrivate->inDirtyList = true;
+        }
+    }
+
     inline void dirtyWidgetsRemoveAll(QWidget *widget)
     {
         int i = 0;
@@ -294,7 +300,6 @@ private:
     friend QRegion qt_dirtyRegion(QWidget *);
     friend class QWidgetPrivate;
     friend class QWidget;
-    friend class QETWidget;
     friend class QBackingStore;
 };
 
diff --git a/src/widgets/kernel/qwidgetsfunctions_wince.cpp b/src/widgets/kernel/qwidgetsfunctions_wince.cpp
index ff3b835d9a..2593cfc7e4 100644
--- a/src/widgets/kernel/qwidgetsfunctions_wince.cpp
+++ b/src/widgets/kernel/qwidgetsfunctions_wince.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidgetsfunctions_wince.h b/src/widgets/kernel/qwidgetsfunctions_wince.h
index ca742e296a..520fb892b3 100644
--- a/src/widgets/kernel/qwidgetsfunctions_wince.h
+++ b/src/widgets/kernel/qwidgetsfunctions_wince.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidgetsvariant.cpp b/src/widgets/kernel/qwidgetsvariant.cpp
index 5ac46c1f59..03c60d71fe 100644
--- a/src/widgets/kernel/qwidgetsvariant.cpp
+++ b/src/widgets/kernel/qwidgetsvariant.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/kernel/qwidgetwindow.cpp b/src/widgets/kernel/qwidgetwindow.cpp
index fc328e7af0..cd57c1611e 100644
--- a/src/widgets/kernel/qwidgetwindow.cpp
+++ b/src/widgets/kernel/qwidgetwindow.cpp
@@ -1,46 +1,38 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 #include "private/qwindow_p.h"
-#include "qwidgetwindow_qpa_p.h"
+#include "qwidgetwindow_p.h"
 
 #include "private/qwidget_p.h"
 #include "private/qapplication_p.h"
@@ -99,7 +91,7 @@ QWidgetWindow::QWidgetWindow(QWidget *widget)
         setSurfaceType(QSurface::RasterGLSurface);
     }
     connect(m_widget, &QObject::objectNameChanged, this, &QWidgetWindow::updateObjectName);
-    connect(this, SIGNAL(screenChanged(QScreen*)), this, SLOT(repaintWindow()));
+    connect(this, SIGNAL(screenChanged(QScreen*)), this, SLOT(handleScreenChange()));
 }
 
 QWidgetWindow::~QWidgetWindow()
@@ -443,7 +435,7 @@ void QWidgetWindow::handleMouseEvent(QMouseEvent *event)
                         // Use postEvent() to ensure the local QEventLoop terminates when called from QMenu::exec()
                         const QPoint localPos = win->mapFromGlobal(event->globalPos());
                         QMouseEvent *e = new QMouseEvent(QEvent::MouseButtonPress, localPos, localPos, event->globalPos(), event->button(), event->buttons(), event->modifiers());
-                        e->spont = 1;
+                        QCoreApplicationPrivate::setEventSpontaneous(e, true);
                         QGuiApplicationPrivate::setMouseEventSource(e, QGuiApplicationPrivate::mouseEventSource(event));
                         e->setTimestamp(event->timestamp());
                         QCoreApplication::postEvent(win, e);
@@ -558,8 +550,27 @@ void QWidgetWindow::updateGeometry()
     m_widget->data->fstrut_dirty = false;
 }
 
-// Invalidates the backing store buffer and repaints immediately.
-// ### Qt 5.4: replace with QUpdateWindowRequestEvent.
+static void sendScreenChangeRecursively(QWidget *widget)
+{
+    QEvent e(QEvent::ScreenChangeInternal);
+    QApplication::sendEvent(widget, &e);
+    QWidgetPrivate *d = QWidgetPrivate::get(widget);
+    for (int i = 0; i < d->children.size(); ++i) {
+        QWidget *w = qobject_cast<QWidget *>(d->children.at(i));
+        if (w)
+            sendScreenChangeRecursively(w);
+    }
+}
+
+void QWidgetWindow::handleScreenChange()
+{
+    // Send an event recursively to the widget and its children.
+    sendScreenChangeRecursively(m_widget);
+
+    // Invalidate the backing store buffer and repaint immediately.
+    repaintWindow();
+}
+
 void QWidgetWindow::repaintWindow()
 {
     if (!m_widget->isVisible() || !m_widget->updatesEnabled())
@@ -795,7 +806,7 @@ void QWidgetWindow::handleTabletEvent(QTabletEvent *event)
         QPointF mapped = qt_tablet_target->mapFromGlobal(event->globalPos()) + delta;
         QTabletEvent ev(event->type(), mapped, event->globalPosF(), event->device(), event->pointerType(),
                         event->pressure(), event->xTilt(), event->yTilt(), event->tangentialPressure(),
-                        event->rotation(), event->z(), event->modifiers(), event->uniqueId());
+                        event->rotation(), event->z(), event->modifiers(), event->uniqueId(), event->button(), event->buttons());
         ev.setTimestamp(event->timestamp());
         QGuiApplication::sendSpontaneousEvent(qt_tablet_target, &ev);
     }
diff --git a/src/widgets/kernel/qwidgetwindow_qpa_p.h b/src/widgets/kernel/qwidgetwindow_p.h
index 76ba618afe..7f12ae8e20 100644
--- a/src/widgets/kernel/qwidgetwindow_qpa_p.h
+++ b/src/widgets/kernel/qwidgetwindow_p.h
@@ -1,46 +1,38 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-#ifndef QWIDGETWINDOW_QPA_P_H
-#define QWIDGETWINDOW_QPA_P_H
+#ifndef QWIDGETWINDOW_P_H
+#define QWIDGETWINDOW_P_H
 
 //
 //  W A R N I N G
@@ -112,9 +104,10 @@ protected:
 
 private slots:
     void updateObjectName();
-    void repaintWindow();
+    void handleScreenChange();
 
 private:
+    void repaintWindow();
     void updateGeometry();
     void updateNormalGeometry();
 
@@ -133,4 +126,4 @@ private:
 
 QT_END_NAMESPACE
 
-#endif // QWIDGETWINDOW_QPA_P_H
+#endif // QWIDGETWINDOW_P_H
diff --git a/src/widgets/kernel/qwindowcontainer.cpp b/src/widgets/kernel/qwindowcontainer.cpp
index 206a265761..34cfb2d99f 100644
--- a/src/widgets/kernel/qwindowcontainer.cpp
+++ b/src/widgets/kernel/qwindowcontainer.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -301,10 +293,16 @@ bool QWindowContainer::event(QEvent *e)
         break;
 #ifndef QT_NO_DRAGANDDROP
     case QEvent::Drop:
-    case QEvent::DragEnter:
     case QEvent::DragMove:
     case QEvent::DragLeave:
-        return d->window->event(e);
+        QCoreApplication::sendEvent(d->window, e);
+        return e->isAccepted();
+    case QEvent::DragEnter:
+        // Don't reject drag events for the entire widget when one
+        // item rejects the drag enter
+        QCoreApplication::sendEvent(d->window, e);
+        e->accept();
+        return true;
 #endif
     default:
         break;
diff --git a/src/widgets/kernel/qwindowcontainer_p.h b/src/widgets/kernel/qwindowcontainer_p.h
index 45b3cc021f..6ba1ab544e 100644
--- a/src/widgets/kernel/qwindowcontainer_p.h
+++ b/src/widgets/kernel/qwindowcontainer_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qbasickeyeventtransition.cpp b/src/widgets/statemachine/qbasickeyeventtransition.cpp
index 5a1b98690e..6472b56221 100644
--- a/src/widgets/statemachine/qbasickeyeventtransition.cpp
+++ b/src/widgets/statemachine/qbasickeyeventtransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qbasickeyeventtransition_p.h b/src/widgets/statemachine/qbasickeyeventtransition_p.h
index 0d1e815dec..cae7342b2e 100644
--- a/src/widgets/statemachine/qbasickeyeventtransition_p.h
+++ b/src/widgets/statemachine/qbasickeyeventtransition_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qbasicmouseeventtransition.cpp b/src/widgets/statemachine/qbasicmouseeventtransition.cpp
index 67d45c86db..9e1254a6a3 100644
--- a/src/widgets/statemachine/qbasicmouseeventtransition.cpp
+++ b/src/widgets/statemachine/qbasicmouseeventtransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qbasicmouseeventtransition_p.h b/src/widgets/statemachine/qbasicmouseeventtransition_p.h
index 47c9f967c0..5adb8702cc 100644
--- a/src/widgets/statemachine/qbasicmouseeventtransition_p.h
+++ b/src/widgets/statemachine/qbasicmouseeventtransition_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qguistatemachine.cpp b/src/widgets/statemachine/qguistatemachine.cpp
index d737a1e323..e8d443b024 100644
--- a/src/widgets/statemachine/qguistatemachine.cpp
+++ b/src/widgets/statemachine/qguistatemachine.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -312,6 +304,8 @@ static QEvent *cloneEvent(QEvent *e)
         me2->setButtons(me->buttons());
         me2->setButton(me->button());
         me2->setModifiers(me->modifiers());
+        me2->setSource(me->source());
+        me2->setFlags(me->flags());
         return me2;
     }
 
diff --git a/src/widgets/statemachine/qkeyeventtransition.cpp b/src/widgets/statemachine/qkeyeventtransition.cpp
index f9a67642e0..502b46602d 100644
--- a/src/widgets/statemachine/qkeyeventtransition.cpp
+++ b/src/widgets/statemachine/qkeyeventtransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qkeyeventtransition.h b/src/widgets/statemachine/qkeyeventtransition.h
index dc310167a3..816770c04a 100644
--- a/src/widgets/statemachine/qkeyeventtransition.h
+++ b/src/widgets/statemachine/qkeyeventtransition.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qmouseeventtransition.cpp b/src/widgets/statemachine/qmouseeventtransition.cpp
index 427e60b75e..3591c4e1c4 100644
--- a/src/widgets/statemachine/qmouseeventtransition.cpp
+++ b/src/widgets/statemachine/qmouseeventtransition.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/statemachine/qmouseeventtransition.h b/src/widgets/statemachine/qmouseeventtransition.h
index a3606e81bc..2bad8b13bd 100644
--- a/src/widgets/statemachine/qmouseeventtransition.h
+++ b/src/widgets/statemachine/qmouseeventtransition.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qandroidstyle.cpp b/src/widgets/styles/qandroidstyle.cpp
index ceb95aa125..38c7497ffa 100644
--- a/src/widgets/styles/qandroidstyle.cpp
+++ b/src/widgets/styles/qandroidstyle.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -118,6 +110,7 @@ QAndroidStyle::QAndroidStyle()
     : QFusionStyle()
 {
     QPixmapCache::clear();
+    checkBoxControl = NULL;
     QString stylePath(QLatin1String(qgetenv("MINISTRO_ANDROID_STYLE_PATH")));
     const QLatin1Char slashChar('/');
     if (!stylePath.isEmpty() && !stylePath.endsWith(slashChar))
@@ -127,8 +120,7 @@ QAndroidStyle::QAndroidStyle()
     if (!androidTheme.isEmpty() && !androidTheme.endsWith(slashChar))
         androidTheme += slashChar;
 
-    if (stylePath.isEmpty())
-    {
+    if (stylePath.isEmpty()) {
         stylePath = QLatin1String("/data/data/org.kde.necessitas.ministro/files/dl/style/")
                   + QLatin1String(qgetenv("QT_ANDROID_THEME_DISPLAY_DPI")) + slashChar;
     }
@@ -143,7 +135,7 @@ QAndroidStyle::QAndroidStyle()
 
     QJsonParseError error;
     QJsonDocument document = QJsonDocument::fromJson(f.readAll(), &error);
-    if (document.isNull())  {
+    if (document.isNull()) {
         qCritical() << error.errorString();
         return;
     }
@@ -155,8 +147,8 @@ QAndroidStyle::QAndroidStyle()
 
     QPlatformNativeInterface *nativeInterface = QGuiApplication::platformNativeInterface();
 
-    QHash<int, QPalette> * palettes = reinterpret_cast<QHash<int, QPalette> *>(nativeInterface->nativeResourceForIntegration("AndroidStylePalettes"));
-    QHash<int, QFont> * fonts = reinterpret_cast<QHash<int, QFont> *>(nativeInterface->nativeResourceForIntegration("AndroidStyleFonts"));
+    QHash<int, QPalette> *palettes = reinterpret_cast<QHash<int, QPalette> *>(nativeInterface->nativeResourceForIntegration("AndroidStylePalettes"));
+    QHash<int, QFont> *fonts = reinterpret_cast<QHash<int, QFont> *>(nativeInterface->nativeResourceForIntegration("AndroidStyleFonts"));
     palettes->clear();
     fonts->clear();
     QJsonObject object = document.object();
@@ -214,7 +206,7 @@ QAndroidStyle::QAndroidStyle()
             }
             if (!qtClassName.isEmpty())
                 QApplication::setFont(font, qtClassName.toUtf8());
-            if (ft>-1)
+            if (ft > -1)
                 fonts->insert(ft, font);
             // Extract font information
         }
@@ -256,6 +248,9 @@ QAndroidStyle::QAndroidStyle()
 
         switch (itemType) {
         case QC_Checkbox:
+            checkBoxControl = new AndroidCompoundButtonControl(item.toVariantMap(), itemType);
+            m_androidControlsHash[int(itemType)] = checkBoxControl;
+            break;
         case QC_RadioButton:
             m_androidControlsHash[int(itemType)] = new AndroidCompoundButtonControl(item.toVariantMap(),
                                                                                     itemType);
@@ -516,16 +511,31 @@ void QAndroidStyle::drawPrimitive(PrimitiveElement pe,
                                              ? m_androidControlsHash.find(itemType)
                                              : m_androidControlsHash.end();
     if (it != m_androidControlsHash.end()) {
-        if (itemType != QC_EditText)
+        if (itemType != QC_EditText) {
             it.value()->drawControl(opt, p, w);
-        else {
+        } else {
             QStyleOption copy(*opt);
             copy.state &= ~QStyle::State_Sunken;
             it.value()->drawControl(&copy, p, w);
         }
-    }
-    else
+    } else if (pe == PE_FrameGroupBox) {
+        if (const QStyleOptionFrame *frame = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
+            const QStyleOptionFrameV2 *frame2 = qstyleoption_cast<const QStyleOptionFrameV2 *>(opt);
+            if (frame2 && (frame2->features & QStyleOptionFrameV2::Flat)) {
+                QRect fr = frame->rect;
+                QPoint p1(fr.x(), fr.y() + 1);
+                QPoint p2(fr.x() + fr.width(), p1.y());
+                qDrawShadeLine(p, p1, p2, frame->palette, true,
+                               frame->lineWidth, frame->midLineWidth);
+            } else {
+                qDrawShadeRect(p, frame->rect.x(), frame->rect.y(), frame->rect.width(),
+                               frame->rect.height(), frame->palette, true,
+                               frame->lineWidth, frame->midLineWidth);
+            }
+        }
+    } else {
         QFusionStyle::drawPrimitive(pe, opt, p, w);
+    }
 }
 
 
@@ -575,6 +585,36 @@ void QAndroidStyle::drawControl(QStyle::ControlElement element,
         default:
             break;
         }
+    } else if (element == CE_ItemViewItem) {
+        const QStyleOptionViewItem *vopt = qstyleoption_cast<const QStyleOptionViewItem *>(opt);
+        if (vopt && vopt->features & QStyleOptionViewItem::HasCheckIndicator) {
+            p->save();
+            p->setClipRect(opt->rect);
+
+            QRect checkRect = proxy()->subElementRect(SE_ItemViewItemCheckIndicator, vopt, w);
+
+            // draw the background
+            proxy()->drawPrimitive(PE_PanelItemViewItem, opt, p, w);
+
+            // draw the check mark
+            QStyleOptionViewItem option(*vopt);
+            option.rect = checkRect;
+            option.state = option.state & ~QStyle::State_HasFocus;
+
+            switch (vopt->checkState) {
+            case Qt::Unchecked:
+                option.state |= QStyle::State_Off;
+                break;
+            default:
+                option.state |= QStyle::State_On;
+                break;
+            }
+            QPixmap pixmap = checkBoxControl->imgCheckBox(&option);
+            p->drawPixmap(checkRect, pixmap);
+            p->restore();
+        } else {
+            QFusionStyle::drawControl(element, opt, p, w);
+        }
     } else {
         QFusionStyle::drawControl(element, opt, p, w);
     }
@@ -602,10 +642,74 @@ void QAndroidStyle::drawComplexControl(ComplexControl cc,
     AndroidControlsHash::const_iterator it = itemType != QC_UnknownType
                                              ? m_androidControlsHash.find(itemType)
                                              : m_androidControlsHash.end();
-    if (it != m_androidControlsHash.end())
+    if (it != m_androidControlsHash.end()) {
         it.value()->drawControl(opt, p, widget);
-    else
-        QFusionStyle::drawComplexControl(cc, opt, p, widget);
+        return;
+    }
+    if (cc == CC_GroupBox) {
+        if (const QStyleOptionGroupBox *groupBox = qstyleoption_cast<const QStyleOptionGroupBox *>(opt)) {
+            // Draw frame
+            QRect textRect = subControlRect(CC_GroupBox, opt, SC_GroupBoxLabel, widget);
+            QRect checkBoxRect;
+            if (groupBox->subControls & SC_GroupBoxCheckBox)
+                checkBoxRect = subControlRect(CC_GroupBox, opt, SC_GroupBoxCheckBox, widget);
+            if (groupBox->subControls & QStyle::SC_GroupBoxFrame) {
+                QStyleOptionFrameV2 frame;
+                frame.QStyleOption::operator=(*groupBox);
+                frame.features = groupBox->features;
+                frame.lineWidth = groupBox->lineWidth;
+                frame.midLineWidth = groupBox->midLineWidth;
+                frame.rect = subControlRect(CC_GroupBox, opt, SC_GroupBoxFrame, widget);
+                p->save();
+                QRegion region(groupBox->rect);
+                if (!groupBox->text.isEmpty()) {
+                    bool ltr = groupBox->direction == Qt::LeftToRight;
+                    QRect finalRect;
+                    if (groupBox->subControls & QStyle::SC_GroupBoxCheckBox) {
+                        finalRect = checkBoxRect.united(textRect);
+                        finalRect.adjust(ltr ? -4 : 0, 0, ltr ? 0 : 4, 0);
+                    } else {
+                        finalRect = textRect;
+                    }
+                    region -= finalRect;
+                }
+                p->setClipRegion(region);
+                drawPrimitive(PE_FrameGroupBox, &frame, p, widget);
+                p->restore();
+            }
+
+            // Draw title
+            if ((groupBox->subControls & QStyle::SC_GroupBoxLabel) && !groupBox->text.isEmpty()) {
+                QColor textColor = groupBox->textColor;
+                if (textColor.isValid())
+                    p->setPen(textColor);
+                int alignment = int(groupBox->textAlignment);
+                if (!styleHint(QStyle::SH_UnderlineShortcut, opt, widget))
+                    alignment |= Qt::TextHideMnemonic;
+
+                drawItemText(p, textRect, Qt::TextShowMnemonic | Qt::AlignHCenter | alignment,
+                             groupBox->palette, groupBox->state & State_Enabled, groupBox->text,
+                             textColor.isValid() ? QPalette::NoRole : QPalette::WindowText);
+
+                if (groupBox->state & State_HasFocus) {
+                    QStyleOptionFocusRect fropt;
+                    fropt.QStyleOption::operator=(*groupBox);
+                    fropt.rect = textRect;
+                    drawPrimitive(PE_FrameFocusRect, &fropt, p, widget);
+                }
+            }
+
+            // Draw checkbox
+            if (groupBox->subControls & SC_GroupBoxCheckBox) {
+                QStyleOptionButton box;
+                box.QStyleOption::operator=(*groupBox);
+                box.rect = checkBoxRect;
+                checkBoxControl->drawControl(&box, p, widget);
+            }
+        }
+        return;
+    }
+    QFusionStyle::drawComplexControl(cc, opt, p, widget);
 }
 
 QStyle::SubControl QAndroidStyle::hitTestComplexControl(ComplexControl cc,
@@ -649,6 +753,52 @@ QRect QAndroidStyle::subControlRect(ComplexControl cc,
                                              : m_androidControlsHash.end();
     if (it != m_androidControlsHash.end())
         return it.value()->subControlRect(opt, sc, widget);
+    QRect rect = opt->rect;
+    switch (cc) {
+        case CC_GroupBox: {
+            if (const QStyleOptionGroupBox *groupBox = qstyleoption_cast<const QStyleOptionGroupBox *>(opt)) {
+                QSize textSize = opt->fontMetrics.boundingRect(groupBox->text).size() + QSize(2, 2);
+                QSize checkBoxSize = checkBoxControl->sizeCheckBox(opt);
+                int indicatorWidth = checkBoxSize.width();
+                int indicatorHeight = checkBoxSize.height();
+                QRect checkBoxRect;
+                if (opt->subControls & QStyle::SC_GroupBoxCheckBox) {
+                    checkBoxRect.setWidth(indicatorWidth);
+                    checkBoxRect.setHeight(indicatorHeight);
+                }
+                checkBoxRect.moveLeft(1);
+                QRect textRect = checkBoxRect;
+                textRect.setSize(textSize);
+                if (opt->subControls & QStyle::SC_GroupBoxCheckBox)
+                    textRect.translate(indicatorWidth + 5, (indicatorHeight - textSize.height()) / 2);
+                if (sc == SC_GroupBoxFrame) {
+                    rect = opt->rect.adjusted(0, 0, 0, 0);
+                    rect.translate(0, textRect.height() / 2);
+                    rect.setHeight(rect.height() - textRect.height() / 2);
+                } else if (sc == SC_GroupBoxContents) {
+                    QRect frameRect = opt->rect.adjusted(0, 0, 0, -groupBox->lineWidth);
+                    int margin = 3;
+                    int leftMarginExtension = 0;
+                    int topMargin = qMax(pixelMetric(PM_ExclusiveIndicatorHeight), opt->fontMetrics.height()) + groupBox->lineWidth;
+                    frameRect.adjust(leftMarginExtension + margin, margin + topMargin, -margin, -margin - groupBox->lineWidth);
+                    frameRect.translate(0, textRect.height() / 2);
+                    rect = frameRect;
+                    rect.setHeight(rect.height() - textRect.height() / 2);
+                } else if (sc == SC_GroupBoxCheckBox) {
+                    rect = checkBoxRect;
+                } else if (sc == SC_GroupBoxLabel) {
+                    rect = textRect;
+                }
+                return visualRect(opt->direction, opt->rect, rect);
+            }
+
+            return rect;
+        }
+
+        default:
+            break;
+    }
+
 
     return QFusionStyle::subControlRect(cc, opt, sc, widget);
 }
@@ -664,6 +814,10 @@ int QAndroidStyle::pixelMetric(PixelMetric metric, const QStyleOption *option,
     case PM_SpinBoxFrameWidth:
     case PM_ScrollBarExtent:
         return 0;
+    case PM_IndicatorWidth:
+        return checkBoxControl->sizeCheckBox(option).width();
+    case PM_IndicatorHeight:
+        return checkBoxControl->sizeCheckBox(option).height();
     default:
         return QFusionStyle::pixelMetric(metric, option, widget);
     }
@@ -676,12 +830,61 @@ QSize QAndroidStyle::sizeFromContents(ContentsType ct,
                                       const QWidget *w) const
 {
     QSize sz = QFusionStyle::sizeFromContents(ct, opt, contentsSize, w);
+    if (ct == CT_HeaderSection) {
+        if (const QStyleOptionHeader *hdr = qstyleoption_cast<const QStyleOptionHeader *>(opt)) {
+            bool nullIcon = hdr->icon.isNull();
+            int margin = pixelMetric(QStyle::PM_HeaderMargin, hdr, w);
+            int iconSize = nullIcon ? 0 : checkBoxControl->sizeCheckBox(opt).width();
+            QSize txt;
+/*
+ * These next 4 lines are a bad hack to fix a bug in case a QStyleSheet is applied at QApplication level.
+ * In that case, even if the stylesheet does not refer to headers, the header font is changed to application
+ * font, which is wrong. Even worst, hdr->fontMetrics(...) does not report the proper size.
+ */
+            if (qApp->styleSheet().isEmpty())
+                txt = hdr->fontMetrics.size(0, hdr->text);
+            else
+                txt = qApp->fontMetrics().size(0, hdr->text);
+
+            sz.setHeight(margin + qMax(iconSize, txt.height()) + margin);
+            sz.setWidth((nullIcon ? 0 : margin) + iconSize
+                        + (hdr->text.isNull() ? 0 : margin) + txt.width() + margin);
+            if (hdr->sortIndicator != QStyleOptionHeader::None) {
+                int margin = pixelMetric(QStyle::PM_HeaderMargin, hdr, w);
+                if (hdr->orientation == Qt::Horizontal)
+                    sz.rwidth() += sz.height() + margin;
+                else
+                    sz.rheight() += sz.width() + margin;
+            }
+            return sz;
+        }
+    }
     const ItemType itemType = qtControl(ct);
     AndroidControlsHash::const_iterator it = itemType != QC_UnknownType
                                              ? m_androidControlsHash.find(itemType)
                                              : m_androidControlsHash.end();
     if (it != m_androidControlsHash.end())
         return it.value()->sizeFromContents(opt, sz, w);
+    if (ct == CT_GroupBox) {
+        if (const QStyleOptionGroupBox *groupBox = qstyleoption_cast<const QStyleOptionGroupBox *>(opt)) {
+            QSize textSize = opt->fontMetrics.boundingRect(groupBox->text).size() + QSize(2, 2);
+            QSize checkBoxSize = checkBoxControl->sizeCheckBox(opt);
+            int indicatorWidth = checkBoxSize.width();
+            int indicatorHeight = checkBoxSize.height();
+            QRect checkBoxRect;
+            if (groupBox->subControls & QStyle::SC_GroupBoxCheckBox) {
+                checkBoxRect.setWidth(indicatorWidth);
+                checkBoxRect.setHeight(indicatorHeight);
+            }
+            checkBoxRect.moveLeft(1);
+            QRect textRect = checkBoxRect;
+            textRect.setSize(textSize);
+            if (groupBox->subControls & QStyle::SC_GroupBoxCheckBox)
+                textRect.translate(indicatorWidth + 5, (indicatorHeight - textSize.height()) / 2);
+            QRect u = textRect.united(checkBoxRect);
+            sz = QSize(sz.width(), sz.height() + u.height());
+        }
+    }
     return sz;
 }
 
@@ -712,7 +915,7 @@ int QAndroidStyle::styleHint(QStyle::StyleHint hint, const QStyleOption *option,
         return RSIP_OnMouseClick;
 
     default:
-        return QFusionStyle::styleHint(hint,option, widget, returnData);
+        return QFusionStyle::styleHint(hint, option, widget, returnData);
     }
 }
 
@@ -761,6 +964,13 @@ QSize QAndroidStyle::AndroidDrawable::size() const
 
     return QSize();
 }
+QPixmap QAndroidStyle::AndroidDrawable::img() const
+{
+    if (type() == Image || type() == NinePatch)
+        return static_cast<const QAndroidStyle::AndroidImageDrawable *>(this)->img();
+
+    return QPixmap();
+}
 
 QAndroidStyle::AndroidDrawable * QAndroidStyle::AndroidDrawable::fromMap(const QVariantMap &drawable,
                                                                          ItemType itemType)
@@ -828,6 +1038,18 @@ void QAndroidStyle::AndroidImageDrawable::draw(QPainter *painter, const QStyleOp
 
     painter->drawPixmap(opt->rect.x(), (opt->rect.height() - pm.height()) / 2, pm);
 }
+QPixmap QAndroidStyle::AndroidImageDrawable::img() const
+{
+    if (m_hashKey.isEmpty())
+        m_hashKey = QFileInfo(m_filePath).fileName();
+
+    QPixmap pm;
+    if (!QPixmapCache::find(m_hashKey, &pm)) {
+        pm.load(m_filePath);
+        QPixmapCache::insert(m_hashKey, pm);
+    }
+    return pm;
+}
 
 QSize QAndroidStyle::AndroidImageDrawable::size() const
 {
@@ -886,7 +1108,7 @@ void QAndroidStyle::Android9PatchDrawable::extractIntArray(const QVariantList &v
 }
 
 
-void QAndroidStyle::Android9PatchDrawable::draw(QPainter * painter, const QStyleOption *opt) const
+void QAndroidStyle::Android9PatchDrawable::draw(QPainter *painter, const QStyleOption *opt) const
 {
     if (m_hashKey.isEmpty())
         m_hashKey = QFileInfo(m_filePath).fileName();
@@ -897,7 +1119,7 @@ void QAndroidStyle::Android9PatchDrawable::draw(QPainter * painter, const QStyle
         QPixmapCache::insert(m_hashKey, pixmap);
     }
 
-    const QRect &bounds=opt->rect;
+    const QRect &bounds = opt->rect;
 
     // shamelessly stolen from Android's sources (NinepatchImpl.cpp) and adapted for Qt
     const int pixmapWidth = pixmap.width();
@@ -1052,11 +1274,11 @@ QAndroidStyle::AndroidGradientDrawable::AndroidGradientDrawable(const QVariantMa
 
     QVariantList colors = drawable.value(QLatin1String("colors")).toList();
     QVariantList positions = drawable.value(QLatin1String("positions")).toList();
-    int min=colors.size() < positions.size() ? colors.size() : positions.size();
+    int min = colors.size() < positions.size() ? colors.size() : positions.size();
     for (int i = 0; i < min; i++)
         m_gradient.setColorAt(positions.at(i).toDouble(), QRgb(colors.at(i).toInt()));
 
-    QByteArray orientation=drawable.value(QLatin1String("orientation")).toByteArray();
+    QByteArray orientation = drawable.value(QLatin1String("orientation")).toByteArray();
     if (orientation == "TOP_BOTTOM") // draw the gradient from the top to the bottom
         m_orientation = TOP_BOTTOM;
     else if (orientation == "TR_BL") // draw the gradient from the top-right to the bottom-left
@@ -1089,43 +1311,43 @@ void QAndroidStyle::AndroidGradientDrawable::draw(QPainter *painter, const QStyl
     switch (m_orientation) {
     case TOP_BOTTOM:
         // draw the gradient from the top to the bottom
-        m_gradient.setStart(width/2,0);
-        m_gradient.setFinalStop(width/2,height);
+        m_gradient.setStart(width / 2, 0);
+        m_gradient.setFinalStop(width / 2, height);
         break;
     case TR_BL:
         // draw the gradient from the top-right to the bottom-left
-        m_gradient.setStart(width,0);
-        m_gradient.setFinalStop(0,height);
+        m_gradient.setStart(width, 0);
+        m_gradient.setFinalStop(0, height);
         break;
     case RIGHT_LEFT:
         // draw the gradient from the right to the left
-        m_gradient.setStart(width,height/2);
-        m_gradient.setFinalStop(0,height/2);
+        m_gradient.setStart(width, height / 2);
+        m_gradient.setFinalStop(0, height / 2);
         break;
     case BR_TL:
         // draw the gradient from the bottom-right to the top-left
-        m_gradient.setStart(width,height);
-        m_gradient.setFinalStop(0,0);
+        m_gradient.setStart(width, height);
+        m_gradient.setFinalStop(0, 0);
         break;
     case BOTTOM_TOP:
         // draw the gradient from the bottom to the top
-        m_gradient.setStart(width/2,height);
-        m_gradient.setFinalStop(width/2,0);
+        m_gradient.setStart(width / 2, height);
+        m_gradient.setFinalStop(width / 2, 0);
         break;
     case BL_TR:
         // draw the gradient from the bottom-left to the top-right
-        m_gradient.setStart(0,height);
-        m_gradient.setFinalStop(width,0);
+        m_gradient.setStart(0, height);
+        m_gradient.setFinalStop(width, 0);
         break;
     case LEFT_RIGHT:
         // draw the gradient from the left to the right
-        m_gradient.setStart(0,height/2);
-        m_gradient.setFinalStop(width,height/2);
+        m_gradient.setStart(0, height / 2);
+        m_gradient.setFinalStop(width, height / 2);
         break;
     case TL_BR:
         // draw the gradient from the top-left to the bottom-right
-        m_gradient.setStart(0,0);
-        m_gradient.setFinalStop(width,height);
+        m_gradient.setStart(0, 0);
+        m_gradient.setFinalStop(width, height);
         break;
     }
 
@@ -1140,7 +1362,7 @@ void QAndroidStyle::AndroidGradientDrawable::draw(QPainter *painter, const QStyl
 
 QSize QAndroidStyle::AndroidGradientDrawable::size() const
 {
-    return QSize(m_radius*2, m_radius*2);
+    return QSize(m_radius * 2, m_radius * 2);
 }
 
 QAndroidStyle::AndroidClipDrawable::AndroidClipDrawable(const QVariantMap &drawable,
@@ -1172,9 +1394,9 @@ void QAndroidStyle::AndroidClipDrawable::draw(QPainter *painter, const QStyleOpt
 {
     QStyleOption copy(*opt);
     if (m_orientation == Qt::Horizontal)
-        copy.rect.setWidth(copy.rect.width()*m_factor);
+        copy.rect.setWidth(copy.rect.width() * m_factor);
     else
-        copy.rect.setHeight(copy.rect.height()*m_factor);
+        copy.rect.setHeight(copy.rect.height() * m_factor);
 
     m_drawable->draw(painter, &copy);
 }
@@ -1212,12 +1434,28 @@ QAndroidStyle::AndroidDrawableType QAndroidStyle::AndroidStateDrawable::type() c
 
 void QAndroidStyle::AndroidStateDrawable::draw(QPainter *painter, const QStyleOption *opt) const
 {
-    const AndroidDrawable *drawable=bestAndroidStateMatch(opt);
+    const AndroidDrawable *drawable = bestAndroidStateMatch(opt);
     if (drawable)
         drawable->draw(painter, opt);
 }
+QSize QAndroidStyle::AndroidStateDrawable::sizeImage(const QStyleOption *opt) const
+{
+    QSize s;
+    const AndroidDrawable *drawable = bestAndroidStateMatch(opt);
+    if (drawable)
+        s = drawable->size();
+    return s;
+}
+QPixmap QAndroidStyle::AndroidStateDrawable::img(const QStyleOption *opt) const
+{
+    QPixmap pm;
+    const AndroidDrawable *drawable = bestAndroidStateMatch(opt);
+    if (drawable)
+        pm = drawable->img();
+    return pm;
+}
 
-const QAndroidStyle::AndroidDrawable* QAndroidStyle::AndroidStateDrawable::bestAndroidStateMatch(const QStyleOption *opt) const
+const QAndroidStyle::AndroidDrawable * QAndroidStyle::AndroidStateDrawable::bestAndroidStateMatch(const QStyleOption *opt) const
 {
     const AndroidDrawable *bestMatch = 0;
     if (!opt) {
@@ -1226,7 +1464,7 @@ const QAndroidStyle::AndroidDrawable* QAndroidStyle::AndroidStateDrawable::bestA
         return bestMatch;
     }
 
-    uint bestCost=0xffff;
+    uint bestCost = 0xffff;
     foreach (const StateType & state, m_states) {
         if (int(opt->state) == state.first)
             return state.second;
@@ -1376,15 +1614,13 @@ void QAndroidStyle::AndroidLayerDrawable::setFactor(int id, double factor, Qt::O
 
 void QAndroidStyle::AndroidLayerDrawable::draw(QPainter *painter, const QStyleOption *opt) const
 {
-    foreach (const LayerType &layer, m_layers)
-    {
-        if (layer.first == m_id)
-        {
+    foreach (const LayerType &layer, m_layers) {
+        if (layer.first == m_id) {
             QStyleOption copy(*opt);
             if (m_orientation == Qt::Horizontal)
-                copy.rect.setWidth(copy.rect.width()*m_factor);
+                copy.rect.setWidth(copy.rect.width() * m_factor);
             else
-                copy.rect.setHeight(copy.rect.height()*m_factor);
+                copy.rect.setHeight(copy.rect.height() * m_factor);
             layer.second->draw(painter, &copy);
         } else {
             layer.second->draw(painter, opt);
@@ -1418,7 +1654,7 @@ QAndroidStyle::AndroidControl::AndroidControl(const QVariantMap &control,
         m_background = 0;
 
     it = control.find(QLatin1String("View_minWidth"));
-    if (it!=control.end())
+    if (it != control.end())
         m_minSize.setWidth(it.value().toInt());
 
     it = control.find(QLatin1String("View_minHeight"));
@@ -1534,10 +1770,9 @@ QSize QAndroidStyle::AndroidControl::sizeFromContents(const QStyleOption *opt,
 
 QMargins QAndroidStyle::AndroidControl::padding()
 {
-    if (const AndroidDrawable *drawable = m_background)
-    {
+    if (const AndroidDrawable *drawable = m_background) {
         if (drawable->type() == State)
-            drawable=static_cast<const AndroidStateDrawable *>(m_background)->bestAndroidStateMatch(0);
+            drawable = static_cast<const AndroidStateDrawable *>(m_background)->bestAndroidStateMatch(0);
         return drawable->padding();
     }
     return QMargins();
@@ -1573,8 +1808,17 @@ void QAndroidStyle::AndroidCompoundButtonControl::drawControl(const QStyleOption
     if (m_button)
         m_button->draw(p, opt);
 }
-
-const QAndroidStyle::AndroidDrawable *QAndroidStyle::AndroidCompoundButtonControl::backgroundDrawable() const
+QSize QAndroidStyle::AndroidCompoundButtonControl::sizeCheckBox(const QStyleOption *opt) const
+{
+    const AndroidDrawable *drawable = m_button;
+    return static_cast<const QAndroidStyle::AndroidStateDrawable *>(drawable)->sizeImage(opt);
+}
+QPixmap QAndroidStyle::AndroidCompoundButtonControl::imgCheckBox(const QStyleOption *opt) const
+{
+    const AndroidDrawable *drawable = m_button;
+    return static_cast<const QAndroidStyle::AndroidStateDrawable *>(drawable)->img(opt);
+}
+const QAndroidStyle::AndroidDrawable * QAndroidStyle::AndroidCompoundButtonControl::backgroundDrawable() const
 {
     return m_background ? m_background : m_button;
 }
@@ -1637,10 +1881,10 @@ void QAndroidStyle::AndroidProgressBarControl::drawControl(const QStyleOption *o
         if (m_progressDrawable->type() == QAndroidStyle::Layer) {
             QAndroidStyle::AndroidDrawable *clipDrawable = static_cast<QAndroidStyle::AndroidLayerDrawable *>(m_progressDrawable)->layer(m_progressId);
             if (clipDrawable->type() == QAndroidStyle::Clip)
-                static_cast<QAndroidStyle::AndroidClipDrawable *>(clipDrawable)->setFactor(double(progressBarV2.progress)/double(progressBarV2.maximum-progressBarV2.minimum),
+                static_cast<QAndroidStyle::AndroidClipDrawable *>(clipDrawable)->setFactor(double(progressBarV2.progress) / double(progressBarV2.maximum - progressBarV2.minimum),
                                                                                            progressBarV2.orientation);
             else
-                static_cast<QAndroidStyle::AndroidLayerDrawable *>(m_progressDrawable)->setFactor(m_progressId,double(progressBarV2.progress)/double(progressBarV2.maximum-progressBarV2.minimum),
+                static_cast<QAndroidStyle::AndroidLayerDrawable *>(m_progressDrawable)->setFactor(m_progressId, double(progressBarV2.progress) / double(progressBarV2.maximum - progressBarV2.minimum),
                                                                                                   progressBarV2.orientation);
         }
         m_progressDrawable->draw(p, option);
@@ -1659,11 +1903,11 @@ QRect QAndroidStyle::AndroidProgressBarControl::subElementRect(QStyle::SubElemen
             return option->rect;
 
         QMargins padding = m_background->padding();
-        QRect p(padding.left(), padding.top(), padding.right()-padding.left(), padding.bottom()-padding.top());
+        QRect p(padding.left(), padding.top(), padding.right() - padding.left(), padding.bottom() - padding.top());
         padding = m_indeterminateDrawable->padding();
-        p |= QRect(padding.left(), padding.top(), padding.right()-padding.left(), padding.bottom()-padding.top());
+        p |= QRect(padding.left(), padding.top(), padding.right() - padding.left(), padding.bottom() - padding.top());
         padding = m_progressDrawable->padding();
-        p |= QRect(padding.left(), padding.top(), padding.right()-padding.left(), padding.bottom()-padding.top());
+        p |= QRect(padding.left(), padding.top(), padding.right() - padding.left(), padding.bottom() - padding.top());
 
         QRect r = option->rect.adjusted(p.left(), p.top(), -p.right(), -p.bottom());
 
@@ -1734,26 +1978,27 @@ void QAndroidStyle::AndroidSeekBarControl::drawControl(const QStyleOption *optio
 
     if (const QStyleOptionSlider *styleOption =
            qstyleoption_cast<const QStyleOptionSlider *>(option)) {
-        double factor = double(styleOption->sliderPosition)/double(styleOption->maximum-styleOption->minimum);
-        if (m_progressDrawable->type()==QAndroidStyle::Layer) {
+        double factor = double(styleOption->sliderPosition - styleOption->minimum)
+                / double(styleOption->maximum - styleOption->minimum);
+        if (m_progressDrawable->type() == QAndroidStyle::Layer) {
             QAndroidStyle::AndroidDrawable *clipDrawable = static_cast<QAndroidStyle::AndroidLayerDrawable *>(m_progressDrawable)->layer(m_progressId);
             if (clipDrawable->type() == QAndroidStyle::Clip)
                 static_cast<QAndroidStyle::AndroidClipDrawable *>(clipDrawable)->setFactor(factor, styleOption->orientation);
             else
                 static_cast<QAndroidStyle::AndroidLayerDrawable *>(m_progressDrawable)->setFactor(m_progressId, factor, styleOption->orientation);
         }
-        const AndroidDrawable *drawable=m_seekBarThumb;
+        const AndroidDrawable *drawable = m_seekBarThumb;
         if (drawable->type() == State)
             drawable = static_cast<const QAndroidStyle::AndroidStateDrawable *>(m_seekBarThumb)->bestAndroidStateMatch(option);
         QStyleOption copy(*option);
-        copy.rect.setY((copy.rect.height()-m_minSize.height())/2);
+        copy.rect.setY((copy.rect.height() - m_minSize.height()) / 2);
         copy.rect.setHeight(m_minSize.height());
         copy.rect.setWidth(copy.rect.width() - drawable->size().width());
-        copy.rect.translate(drawable->size().width()/2, 0);
+        copy.rect.translate(drawable->size().width() / 2, 0);
         m_progressDrawable->draw(p, &copy);
         if (styleOption->orientation == Qt::Vertical)
             qCritical() << "Vertical slider are not supported";
-        int pos = copy.rect.width()*factor - drawable->size().width()/2;
+        int pos = copy.rect.width()*factor - drawable->size().width() / 2;
         copy.rect.translate(pos, 0);
         copy.rect.setSize(drawable->size());
         m_seekBarThumb->draw(p, &copy);
@@ -1767,7 +2012,7 @@ QSize QAndroidStyle::AndroidSeekBarControl::sizeFromContents(const QStyleOption
     QSize sz = AndroidProgressBarControl::sizeFromContents(opt, contentsSize, w);
     if (!m_seekBarThumb)
         return sz;
-    const AndroidDrawable *drawable=m_seekBarThumb;
+    const AndroidDrawable *drawable = m_seekBarThumb;
     if (drawable->type() == State)
         drawable = static_cast<const QAndroidStyle::AndroidStateDrawable *>(m_seekBarThumb)->bestAndroidStateMatch(opt);
     return sz.expandedTo(drawable->size());
@@ -1786,7 +2031,8 @@ QRect QAndroidStyle::AndroidSeekBarControl::subControlRect(const QStyleOptionCom
             drawable = static_cast<const QAndroidStyle::AndroidStateDrawable *>(m_seekBarThumb)->bestAndroidStateMatch(option);
 
         QRect r(option->rect);
-        double factor = double(styleOption->sliderPosition) / (styleOption->maximum - styleOption->minimum);
+        double factor = double(styleOption->sliderPosition - styleOption->minimum)
+                / (styleOption->maximum - styleOption->minimum);
         int pos = option->rect.width() * factor - double(drawable->size().width() / 2);
         r.setX(r.x() + pos);
         r.setSize(drawable->size());
diff --git a/src/widgets/styles/qandroidstyle_p.h b/src/widgets/styles/qandroidstyle_p.h
index d64e37b9db..65fa4cd096 100644
--- a/src/widgets/styles/qandroidstyle_p.h
+++ b/src/widgets/styles/qandroidstyle_p.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -132,6 +124,7 @@ public:
         static AndroidDrawable *fromMap(const QVariantMap &drawable, ItemType itemType);
         static QMargins extractMargins(const QVariantMap &value);
         virtual void setPaddingLeftToSizeWidth();
+        QPixmap img() const;
     protected:
         ItemType m_itemType;
         QMargins m_padding;
@@ -156,6 +149,7 @@ public:
         virtual void draw(QPainter *painter,const QStyleOption *opt) const;
         virtual QSize size() const;
 
+        QPixmap img() const;
     protected:
         QString m_filePath;
         mutable QString m_hashKey;
@@ -228,7 +222,8 @@ public:
         inline const AndroidDrawable *bestAndroidStateMatch(const QStyleOption *opt) const;
         static int extractState(const QVariantMap &value);
         virtual void setPaddingLeftToSizeWidth();
-
+        QSize sizeImage(const QStyleOption *opt) const;
+        QPixmap img(const QStyleOption *opt) const;
     private:
         typedef QPair<int, const AndroidDrawable *> StateType;
         QList<StateType> m_states;
@@ -281,7 +276,8 @@ public:
         AndroidCompoundButtonControl(const QVariantMap &control, ItemType itemType);
         virtual ~AndroidCompoundButtonControl();
         virtual void drawControl(const QStyleOption *opt, QPainter *p, const QWidget *w);
-
+        QSize sizeCheckBox(const QStyleOption *opt) const;
+        QPixmap imgCheckBox(const QStyleOption *opt) const;
     protected:
         virtual const AndroidDrawable * backgroundDrawable() const;
         const AndroidDrawable *m_button;
@@ -387,6 +383,7 @@ private:
     typedef QHash<int, AndroidControl *> AndroidControlsHash;
     AndroidControlsHash m_androidControlsHash;
     QPalette m_standardPalette;
+    AndroidCompoundButtonControl *checkBoxControl;
 };
 
 #endif // QT_NO_STYLE_ANDROID
diff --git a/src/widgets/styles/qcommonstyle.cpp b/src/widgets/styles/qcommonstyle.cpp
index 27fef46772..8579308820 100644
--- a/src/widgets/styles/qcommonstyle.cpp
+++ b/src/widgets/styles/qcommonstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -321,22 +313,24 @@ void QCommonStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt, Q
         if (const QStyleOptionHeader *header = qstyleoption_cast<const QStyleOptionHeader *>(opt)) {
             QPen oldPen = p->pen();
             if (header->sortIndicator & QStyleOptionHeader::SortUp) {
-                QPolygon pa(3);
                 p->setPen(QPen(opt->palette.light(), 0));
                 p->drawLine(opt->rect.x() + opt->rect.width(), opt->rect.y(),
                             opt->rect.x() + opt->rect.width() / 2, opt->rect.y() + opt->rect.height());
                 p->setPen(QPen(opt->palette.dark(), 0));
-                pa.setPoint(0, opt->rect.x() + opt->rect.width() / 2, opt->rect.y() + opt->rect.height());
-                pa.setPoint(1, opt->rect.x(), opt->rect.y());
-                pa.setPoint(2, opt->rect.x() + opt->rect.width(), opt->rect.y());
-                p->drawPolyline(pa);
+                const QPoint points[] = {
+                    QPoint(opt->rect.x() + opt->rect.width() / 2, opt->rect.y() + opt->rect.height()),
+                    QPoint(opt->rect.x(), opt->rect.y()),
+                    QPoint(opt->rect.x() + opt->rect.width(), opt->rect.y()),
+                };
+                p->drawPolyline(points, sizeof points / sizeof *points);
             } else if (header->sortIndicator & QStyleOptionHeader::SortDown) {
-                QPolygon pa(3);
                 p->setPen(QPen(opt->palette.light(), 0));
-                pa.setPoint(0, opt->rect.x(), opt->rect.y() + opt->rect.height());
-                pa.setPoint(1, opt->rect.x() + opt->rect.width(), opt->rect.y() + opt->rect.height());
-                pa.setPoint(2, opt->rect.x() + opt->rect.width() / 2, opt->rect.y());
-                p->drawPolyline(pa);
+                const QPoint points[] = {
+                    QPoint(opt->rect.x(), opt->rect.y() + opt->rect.height()),
+                    QPoint(opt->rect.x() + opt->rect.width(), opt->rect.y() + opt->rect.height()),
+                    QPoint(opt->rect.x() + opt->rect.width() / 2, opt->rect.y()),
+                };
+                p->drawPolyline(points, sizeof points / sizeof *points);
                 p->setPen(QPen(opt->palette.dark(), 0));
                 p->drawLine(opt->rect.x(), opt->rect.y() + opt->rect.height(),
                             opt->rect.x() + opt->rect.width() / 2, opt->rect.y());
@@ -416,8 +410,7 @@ void QCommonStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt, Q
 #ifndef QT_NO_GROUPBOX
     case PE_FrameGroupBox:
         if (const QStyleOptionFrame *frame = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
-            const QStyleOptionFrameV2 *frame2 = qstyleoption_cast<const QStyleOptionFrameV2 *>(opt);
-            if (frame2 && (frame2->features & QStyleOptionFrameV2::Flat)) {
+            if (frame->features & QStyleOptionFrame::Flat) {
                 QRect fr = frame->rect;
                 QPoint p1(fr.x(), fr.y() + 1);
                 QPoint p2(fr.x() + fr.width(), p1.y());
@@ -519,11 +512,6 @@ void QCommonStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt, Q
         if (pe == PE_IndicatorSpinUp && fw)
             --sy;
 
-        QPolygon a;
-        if (pe == PE_IndicatorSpinDown)
-            a.setPoints(3, 0, 1,  sw-1, 1,  sh-2, sh-1);
-        else
-            a.setPoints(3, 0, sh-1,  sw-1, sh-1,  sh-2, 1);
         int bsx = 0;
         int bsy = 0;
         if (opt->state & State_Sunken) {
@@ -535,7 +523,13 @@ void QCommonStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt, Q
         p->setPen(opt->palette.buttonText().color());
         p->setBrush(opt->palette.buttonText());
         p->setRenderHint(QPainter::Qt4CompatiblePainting);
-        p->drawPolygon(a);
+        if (pe == PE_IndicatorSpinDown) {
+            const QPoint points[] = { QPoint(0, 1), QPoint(sw-1, 1), QPoint(sh-2, sh-1) };
+            p->drawPolygon(points, sizeof points / sizeof *points);
+        } else {
+            const QPoint points[] = { QPoint(0, sh-1), QPoint(sw-1, sh-1), QPoint(sh-2, 1) };
+            p->drawPolygon(points, sizeof points / sizeof *points);
+        }
         p->restore();
         break; }
 #endif // QT_NO_SPINBOX
@@ -1156,7 +1150,7 @@ void QCommonStylePrivate::startAnimation(QStyleAnimation *animation) const
     stopAnimation(animation->target());
     q->connect(animation, SIGNAL(destroyed()), SLOT(_q_removeAnimation()), Qt::UniqueConnection);
     animations.insert(animation->target(), animation);
-    animation->start(QAbstractAnimation::DeleteWhenStopped);
+    animation->start();
 }
 
 /*! \internal */
@@ -1644,30 +1638,33 @@ void QCommonStyle::drawControl(ControlElement element, const QStyleOption *opt,
         break;
     case CE_ToolBoxTabShape:
         if (const QStyleOptionToolBox *tb = qstyleoption_cast<const QStyleOptionToolBox *>(opt)) {
+            p->setPen(tb->palette.mid().color().darker(150));
+            bool oldQt4CompatiblePainting = p->testRenderHint(QPainter::Qt4CompatiblePainting);
+            p->setRenderHint(QPainter::Qt4CompatiblePainting);
             int d = 20 + tb->rect.height() - 3;
-            QPolygon a(7);
             if (tb->direction != Qt::RightToLeft) {
-                a.setPoint(0, -1, tb->rect.height() + 1);
-                a.setPoint(1, -1, 1);
-                a.setPoint(2, tb->rect.width() - d, 1);
-                a.setPoint(3, tb->rect.width() - 20, tb->rect.height() - 2);
-                a.setPoint(4, tb->rect.width() - 1, tb->rect.height() - 2);
-                a.setPoint(5, tb->rect.width() - 1, tb->rect.height() + 1);
-                a.setPoint(6, -1, tb->rect.height() + 1);
+                const QPoint points[] = {
+                    QPoint(-1, tb->rect.height() + 1),
+                    QPoint(-1, 1),
+                    QPoint(tb->rect.width() - d, 1),
+                    QPoint(tb->rect.width() - 20, tb->rect.height() - 2),
+                    QPoint(tb->rect.width() - 1, tb->rect.height() - 2),
+                    QPoint(tb->rect.width() - 1, tb->rect.height() + 1),
+                    QPoint(-1, tb->rect.height() + 1),
+                };
+                p->drawPolygon(points, sizeof points / sizeof *points);
             } else {
-                a.setPoint(0, tb->rect.width(), tb->rect.height() + 1);
-                a.setPoint(1, tb->rect.width(), 1);
-                a.setPoint(2, d - 1, 1);
-                a.setPoint(3, 20 - 1, tb->rect.height() - 2);
-                a.setPoint(4, 0, tb->rect.height() - 2);
-                a.setPoint(5, 0, tb->rect.height() + 1);
-                a.setPoint(6, tb->rect.width(), tb->rect.height() + 1);
+                const QPoint points[] = {
+                    QPoint(tb->rect.width(), tb->rect.height() + 1),
+                    QPoint(tb->rect.width(), 1),
+                    QPoint(d - 1, 1),
+                    QPoint(20 - 1, tb->rect.height() - 2),
+                    QPoint(0, tb->rect.height() - 2),
+                    QPoint(0, tb->rect.height() + 1),
+                    QPoint(tb->rect.width(), tb->rect.height() + 1),
+                };
+                p->drawPolygon(points, sizeof points / sizeof *points);
             }
-
-            p->setPen(tb->palette.mid().color().darker(150));
-            bool oldQt4CompatiblePainting = p->testRenderHint(QPainter::Qt4CompatiblePainting);
-            p->setRenderHint(QPainter::Qt4CompatiblePainting);
-            p->drawPolygon(a);
             p->setRenderHint(QPainter::Qt4CompatiblePainting, oldQt4CompatiblePainting);
             p->setPen(tb->palette.light().color());
             if (tb->direction != Qt::RightToLeft) {
@@ -2228,7 +2225,7 @@ void QCommonStyle::drawControl(ControlElement element, const QStyleOption *opt,
 #endif // QT_NO_ITEMVIEWS
 #ifndef QT_NO_FRAME
     case CE_ShapedFrame:
-        if (const QStyleOptionFrameV3 *f = qstyleoption_cast<const QStyleOptionFrameV3 *>(opt)) {
+        if (const QStyleOptionFrame *f = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
             int frameShape  = f->frameShape;
             int frameShadow = QFrame::Plain;
             if (f->state & QStyle::State_Sunken) {
@@ -2818,14 +2815,14 @@ QRect QCommonStyle::subElementRect(SubElement sr, const QStyleOption *opt,
         }
         break;
     case SE_FrameContents:
-        if (const QStyleOptionFrameV2 *f = qstyleoption_cast<const QStyleOptionFrameV2 *>(opt)) {
+        if (const QStyleOptionFrame *f = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
             int fw = proxy()->pixelMetric(PM_DefaultFrameWidth, f, widget);
             r = opt->rect.adjusted(fw, fw, -fw, -fw);
             r = visualRect(opt->direction, opt->rect, r);
         }
         break;
     case SE_ShapedFrameContents:
-        if (const QStyleOptionFrameV3 *f = qstyleoption_cast<const QStyleOptionFrameV3 *>(opt)) {
+        if (const QStyleOptionFrame *f = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
             int frameShape  = f->frameShape;
             int frameShadow = QFrame::Plain;
             if (f->state & QStyle::State_Sunken) {
@@ -2914,7 +2911,7 @@ QRect QCommonStyle::subElementRect(SubElement sr, const QStyleOption *opt,
 
             QRect closeRect;
             if (canClose) {
-                QSize sz = standardIcon(QStyle::SP_TitleBarCloseButton,
+                QSize sz = proxy()->standardIcon(QStyle::SP_TitleBarCloseButton,
                                         opt, widget).actualSize(QSize(iconSize, iconSize));
                 sz += QSize(buttonMargin, buttonMargin);
                 if (verticalTitleBar)
@@ -2931,7 +2928,7 @@ QRect QCommonStyle::subElementRect(SubElement sr, const QStyleOption *opt,
 
             QRect floatRect;
             if (canFloat) {
-                QSize sz = standardIcon(QStyle::SP_TitleBarNormalButton,
+                QSize sz = proxy()->standardIcon(QStyle::SP_TitleBarNormalButton,
                                         opt, widget).actualSize(QSize(iconSize, iconSize));
                 sz += QSize(buttonMargin, buttonMargin);
                 if (verticalTitleBar)
@@ -3039,7 +3036,18 @@ QRect QCommonStyle::subElementRect(SubElement sr, const QStyleOption *opt,
 
 #ifndef QT_NO_DIAL
 
-static QPolygonF calcArrow(const QStyleOptionSlider *dial, qreal &a)
+// in lieu of std::array, minimal API
+template <int N>
+struct StaticPolygonF
+{
+    QPointF data[N];
+
+    Q_DECL_CONSTEXPR int size() const { return N; }
+    Q_DECL_CONSTEXPR const QPointF *cbegin() const { return data; }
+    Q_DECL_CONSTEXPR const QPointF &operator[](int idx) const { return data[idx]; }
+};
+
+static StaticPolygonF<3> calcArrow(const QStyleOptionSlider *dial, qreal &a)
 {
     int width = dial->rect.width();
     int height = dial->rect.height();
@@ -3063,13 +3071,14 @@ static QPolygonF calcArrow(const QStyleOptionSlider *dial, qreal &a)
         len = 5;
     int back = len / 2;
 
-    QPolygonF arrow(3);
-    arrow[0] = QPointF(0.5 + xc + len * qCos(a),
-                       0.5 + yc - len * qSin(a));
-    arrow[1] = QPointF(0.5 + xc + back * qCos(a + Q_PI * 5 / 6),
-                       0.5 + yc - back * qSin(a + Q_PI * 5 / 6));
-    arrow[2] = QPointF(0.5 + xc + back * qCos(a - Q_PI * 5 / 6),
-                       0.5 + yc - back * qSin(a - Q_PI * 5 / 6));
+    StaticPolygonF<3> arrow = {{
+        QPointF(0.5 + xc + len * qCos(a),
+                0.5 + yc - len * qSin(a)),
+        QPointF(0.5 + xc + back * qCos(a + Q_PI * 5 / 6),
+                0.5 + yc - back * qSin(a + Q_PI * 5 / 6)),
+        QPointF(0.5 + xc + back * qCos(a - Q_PI * 5 / 6),
+                0.5 + yc - back * qSin(a - Q_PI * 5 / 6)),
+    }};
     return arrow;
 }
 
@@ -3394,9 +3403,9 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                     || qobject_cast<const QDockWidget *>(widget)
 #endif
                     )
-                    pm = standardIcon(SP_DockWidgetCloseButton, &tool, widget).pixmap(10, 10);
+                    pm = proxy()->standardIcon(SP_DockWidgetCloseButton, &tool, widget).pixmap(10, 10);
                 else
-                    pm = standardIcon(SP_TitleBarCloseButton, &tool, widget).pixmap(10, 10);
+                    pm = proxy()->standardIcon(SP_TitleBarCloseButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3415,7 +3424,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                 ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarMaxButton, widget);
 
                 down = tb->activeSubControls & SC_TitleBarMaxButton && (opt->state & State_Sunken);
-                pm = standardIcon(SP_TitleBarMaxButton, &tool, widget).pixmap(10, 10);
+                pm = proxy()->standardIcon(SP_TitleBarMaxButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3433,7 +3442,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                     && !(tb->titleBarState & Qt::WindowMinimized)) {
                 ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarMinButton, widget);
                 down = tb->activeSubControls & SC_TitleBarMinButton && (opt->state & State_Sunken);
-                pm = standardIcon(SP_TitleBarMinButton, &tool, widget).pixmap(10, 10);
+                pm = proxy()->standardIcon(SP_TitleBarMinButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3455,7 +3464,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
             if (drawNormalButton) {
                 ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarNormalButton, widget);
                 down = tb->activeSubControls & SC_TitleBarNormalButton && (opt->state & State_Sunken);
-                pm = standardIcon(SP_TitleBarNormalButton, &tool, widget).pixmap(10, 10);
+                pm = proxy()->standardIcon(SP_TitleBarNormalButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3473,7 +3482,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                     && !(tb->titleBarState & Qt::WindowMinimized)) {
                 ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarShadeButton, widget);
                 down = (tb->activeSubControls & SC_TitleBarShadeButton && (opt->state & State_Sunken));
-                pm = standardIcon(SP_TitleBarShadeButton, &tool, widget).pixmap(10, 10);
+                pm = proxy()->standardIcon(SP_TitleBarShadeButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3491,7 +3500,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                 ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarUnshadeButton, widget);
 
                 down = tb->activeSubControls & SC_TitleBarUnshadeButton  && (opt->state & State_Sunken);
-                pm = standardIcon(SP_TitleBarUnshadeButton, &tool, widget).pixmap(10, 10);
+                pm = proxy()->standardIcon(SP_TitleBarUnshadeButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3507,7 +3516,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                 ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarContextHelpButton, widget);
 
                 down = tb->activeSubControls & SC_TitleBarContextHelpButton  && (opt->state & State_Sunken);
-                pm = standardIcon(SP_TitleBarContextHelpButton, &tool, widget).pixmap(10, 10);
+                pm = proxy()->standardIcon(SP_TitleBarContextHelpButton, &tool, widget).pixmap(10, 10);
                 tool.rect = ir;
                 tool.state = down ? State_Sunken : State_Raised;
                 proxy()->drawPrimitive(PE_PanelButtonTool, &tool, p, widget);
@@ -3524,7 +3533,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                     tb->icon.paint(p, ir);
                 } else {
                     int iconSize = proxy()->pixelMetric(PM_SmallIconSize, tb, widget);
-                    pm = standardIcon(SP_TitleBarMenuButton, &tool, widget).pixmap(iconSize, iconSize);
+                    pm = proxy()->standardIcon(SP_TitleBarMenuButton, &tool, widget).pixmap(iconSize, iconSize);
                     tool.rect = ir;
                     p->save();
                     proxy()->drawItemPixmap(p, ir, Qt::AlignCenter, pm);
@@ -3571,12 +3580,12 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
             p->drawArc(br, 240 * 16, 180 * 16);
 
             qreal a;
-            QPolygonF arrow(calcArrow(dial, a));
+            const StaticPolygonF<3> arrow = calcArrow(dial, a);
 
             p->setPen(Qt::NoPen);
             p->setBrush(pal.button());
             p->setRenderHint(QPainter::Qt4CompatiblePainting);
-            p->drawPolygon(arrow);
+            p->drawPolygon(arrow.cbegin(), arrow.size());
 
             a = QStyleHelper::angle(QPointF(width / 2, height / 2), arrow[0]);
             p->setBrush(Qt::NoBrush);
@@ -3634,7 +3643,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
             QRect textRect = proxy()->subControlRect(CC_GroupBox, opt, SC_GroupBoxLabel, widget);
             QRect checkBoxRect = proxy()->subControlRect(CC_GroupBox, opt, SC_GroupBoxCheckBox, widget);
             if (groupBox->subControls & QStyle::SC_GroupBoxFrame) {
-                QStyleOptionFrameV2 frame;
+                QStyleOptionFrame frame;
                 frame.QStyleOption::operator=(*groupBox);
                 frame.features = groupBox->features;
                 frame.lineWidth = groupBox->lineWidth;
@@ -3711,7 +3720,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                 }
                 btnOpt.rect = proxy()->subControlRect(CC_MdiControls, opt, SC_MdiCloseButton, widget);
                 proxy()->drawPrimitive(PE_PanelButtonCommand, &btnOpt, p, widget);
-                QPixmap pm = standardIcon(SP_TitleBarCloseButton).pixmap(16, 16);
+                QPixmap pm = proxy()->standardIcon(SP_TitleBarCloseButton).pixmap(16, 16);
                 proxy()->drawItemPixmap(p, btnOpt.rect.translated(bsx, bsy), Qt::AlignCenter, pm);
             }
             if (opt->subControls & QStyle::SC_MdiNormalButton) {
@@ -3728,7 +3737,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                 }
                 btnOpt.rect = proxy()->subControlRect(CC_MdiControls, opt, SC_MdiNormalButton, widget);
                 proxy()->drawPrimitive(PE_PanelButtonCommand, &btnOpt, p, widget);
-                QPixmap pm = standardIcon(SP_TitleBarNormalButton).pixmap(16, 16);
+                QPixmap pm = proxy()->standardIcon(SP_TitleBarNormalButton).pixmap(16, 16);
                 proxy()->drawItemPixmap(p, btnOpt.rect.translated(bsx, bsy), Qt::AlignCenter, pm);
             }
             if (opt->subControls & QStyle::SC_MdiMinButton) {
@@ -3745,7 +3754,7 @@ void QCommonStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCompl
                 }
                 btnOpt.rect = proxy()->subControlRect(CC_MdiControls, opt, SC_MdiMinButton, widget);
                 proxy()->drawPrimitive(PE_PanelButtonCommand, &btnOpt, p, widget);
-                QPixmap pm = standardIcon(SP_TitleBarMinButton).pixmap(16, 16);
+                QPixmap pm = proxy()->standardIcon(SP_TitleBarMinButton).pixmap(16, 16);
                 proxy()->drawItemPixmap(p, btnOpt.rect.translated(bsx, bsy), Qt::AlignCenter, pm);
             }
         }
@@ -4225,7 +4234,7 @@ QRect QCommonStyle::subControlRect(ComplexControl cc, const QStyleOptionComplex
                 }
 
                 int frameWidth = 0;
-                if ((groupBox->features & QStyleOptionFrameV2::Flat) == 0)
+                if ((groupBox->features & QStyleOptionFrame::Flat) == 0)
                     frameWidth = proxy()->pixelMetric(PM_DefaultFrameWidth, groupBox, widget);
                 ret = frameRect.adjusted(frameWidth, frameWidth + topHeight - topMargin,
                                          -frameWidth, -frameWidth);
@@ -4237,7 +4246,7 @@ QRect QCommonStyle::subControlRect(ComplexControl cc, const QStyleOptionComplex
                 QFontMetrics fontMetrics = groupBox->fontMetrics;
                 int h = fontMetrics.height();
                 int tw = fontMetrics.size(Qt::TextShowMnemonic, groupBox->text + QLatin1Char(' ')).width();
-                int marg = (groupBox->features & QStyleOptionFrameV2::Flat) ? 0 : 8;
+                int marg = (groupBox->features & QStyleOptionFrame::Flat) ? 0 : 8;
                 ret = groupBox->rect.adjusted(marg, 0, -marg, 0);
                 ret.setHeight(h);
 
@@ -4679,6 +4688,9 @@ int QCommonStyle::pixelMetric(PixelMetric m, const QStyleOption *opt, const QWid
     case PM_SubMenuOverlap:
         ret = -proxy()->pixelMetric(QStyle::PM_MenuPanelWidth, opt, widget);
         break;
+    case PM_TreeViewIndentation:
+        ret = int(QStyleHelper::dpiScaled(20.));
+        break;
     default:
         ret = 0;
         break;
@@ -4932,6 +4944,9 @@ int QCommonStyle::styleHint(StyleHint sh, const QStyleOption *opt, const QWidget
         ret = hint.toChar().unicode();
         break;
     }
+    case SH_LineEdit_PasswordMaskDelay:
+        ret = QGuiApplicationPrivate::platformTheme()->themeHint(QPlatformTheme::PasswordMaskDelay).toInt();
+        break;
     case SH_ToolBox_SelectedPageTitleBold:
         ret = 1;
         break;
@@ -5108,6 +5123,9 @@ int QCommonStyle::styleHint(StyleHint sh, const QStyleOption *opt, const QWidget
     case SH_TabBar_CloseButtonPosition:
         ret = QTabBar::RightSide;
         break;
+    case SH_TabBar_ChangeCurrentDelay:
+        ret = 500;
+        break;
 #endif
     case SH_DockWidget_ButtonsHaveFrame:
         ret = true;
@@ -5155,6 +5173,17 @@ int QCommonStyle::styleHint(StyleHint sh, const QStyleOption *opt, const QWidget
     return ret;
 }
 
+static QPixmap cachedPixmapFromXPM(const char * const *xpm)
+{
+    QPixmap result;
+    const QString tag = QString().sprintf("xpm:0x%p", static_cast<const void*>(xpm));
+    if (!QPixmapCache::find(tag, &result)) {
+        result = QPixmap(xpm);
+        QPixmapCache::insert(tag, result);
+    }
+    return result;
+}
+
 /*! \reimp */
 QPixmap QCommonStyle::standardPixmap(StandardPixmap sp, const QStyleOption *option,
                                      const QWidget *widget) const
@@ -5350,13 +5379,13 @@ QPixmap QCommonStyle::standardPixmap(StandardPixmap sp, const QStyleOption *opti
             im = im.convertToFormat(QImage::Format_ARGB32).mirrored(true, false);
             return QPixmap::fromImage(im);
         }
-        return QPixmap(tb_extension_arrow_h_xpm);
+        return cachedPixmapFromXPM(tb_extension_arrow_h_xpm);
     case SP_ToolBarVerticalExtensionButton:
-        return QPixmap(tb_extension_arrow_v_xpm);
+        return cachedPixmapFromXPM(tb_extension_arrow_v_xpm);
     case SP_FileDialogStart:
-        return QPixmap(filedialog_start_xpm);
+        return cachedPixmapFromXPM(filedialog_start_xpm);
     case SP_FileDialogEnd:
-        return QPixmap(filedialog_end_xpm);
+        return cachedPixmapFromXPM(filedialog_end_xpm);
 #endif
 #ifndef QT_NO_IMAGEFORMAT_PNG
     case SP_CommandLink:
@@ -5472,31 +5501,31 @@ QPixmap QCommonStyle::standardPixmap(StandardPixmap sp, const QStyleOption *opti
 #ifndef QT_NO_IMAGEFORMAT_XPM
     switch (sp) {
     case SP_TitleBarMenuButton:
-        return QPixmap(qt_menu_xpm);
+        return cachedPixmapFromXPM(qt_menu_xpm);
     case SP_TitleBarShadeButton:
-        return QPixmap(qt_shade_xpm);
+        return cachedPixmapFromXPM(qt_shade_xpm);
     case SP_TitleBarUnshadeButton:
-        return QPixmap(qt_unshade_xpm);
+        return cachedPixmapFromXPM(qt_unshade_xpm);
     case SP_TitleBarNormalButton:
-        return QPixmap(qt_normalizeup_xpm);
+        return cachedPixmapFromXPM(qt_normalizeup_xpm);
     case SP_TitleBarMinButton:
-        return QPixmap(qt_minimize_xpm);
+        return cachedPixmapFromXPM(qt_minimize_xpm);
     case SP_TitleBarMaxButton:
-        return QPixmap(qt_maximize_xpm);
+        return cachedPixmapFromXPM(qt_maximize_xpm);
     case SP_TitleBarCloseButton:
-        return QPixmap(qt_close_xpm);
+        return cachedPixmapFromXPM(qt_close_xpm);
     case SP_TitleBarContextHelpButton:
-        return QPixmap(qt_help_xpm);
+        return cachedPixmapFromXPM(qt_help_xpm);
     case SP_DockWidgetCloseButton:
-        return QPixmap(dock_widget_close_xpm);
+        return cachedPixmapFromXPM(dock_widget_close_xpm);
     case SP_MessageBoxInformation:
-        return QPixmap(information_xpm);
+        return cachedPixmapFromXPM(information_xpm);
     case SP_MessageBoxWarning:
-        return QPixmap(warning_xpm);
+        return cachedPixmapFromXPM(warning_xpm);
     case SP_MessageBoxCritical:
-        return QPixmap(critical_xpm);
+        return cachedPixmapFromXPM(critical_xpm);
     case SP_MessageBoxQuestion:
-        return QPixmap(question_xpm);
+        return cachedPixmapFromXPM(question_xpm);
     default:
         break;
     }
diff --git a/src/widgets/styles/qcommonstyle.h b/src/widgets/styles/qcommonstyle.h
index ef5634a94d..7e885d0b77 100644
--- a/src/widgets/styles/qcommonstyle.h
+++ b/src/widgets/styles/qcommonstyle.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qcommonstyle_p.h b/src/widgets/styles/qcommonstyle_p.h
index 1f5d8b8a81..ccca5ccd9d 100644
--- a/src/widgets/styles/qcommonstyle_p.h
+++ b/src/widgets/styles/qcommonstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qcommonstylepixmaps_p.h b/src/widgets/styles/qcommonstylepixmaps_p.h
index d47b16d1a4..43dc446834 100644
--- a/src/widgets/styles/qcommonstylepixmaps_p.h
+++ b/src/widgets/styles/qcommonstylepixmaps_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qdrawutil.cpp b/src/widgets/styles/qdrawutil.cpp
index 3df3bfa50d..14f8cef15b 100644
--- a/src/widgets/styles/qdrawutil.cpp
+++ b/src/widgets/styles/qdrawutil.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qdrawutil.h b/src/widgets/styles/qdrawutil.h
index 6e9dc26591..a878c8a7ca 100644
--- a/src/widgets/styles/qdrawutil.h
+++ b/src/widgets/styles/qdrawutil.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qfusionstyle.cpp b/src/widgets/styles/qfusionstyle.cpp
index 012f5ea18f..8d7ca42934 100644
--- a/src/widgets/styles/qfusionstyle.cpp
+++ b/src/widgets/styles/qfusionstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -749,6 +741,7 @@ void QFusionStyle::drawPrimitive(PrimitiveElement elem,
             painter->drawRect(rect);
 
             QColor checkMarkColor = option->palette.text().color().darker(120);
+            const int checkMarkPadding = QStyleHelper::dpiScaled(3);
 
             if (checkbox->state & State_NoChange) {
                 gradient = QLinearGradient(rect.topLeft(), rect.bottomLeft());
@@ -759,10 +752,10 @@ void QFusionStyle::drawPrimitive(PrimitiveElement elem,
                 checkMarkColor.setAlpha(180);
                 painter->setPen(QPen(checkMarkColor, 1));
                 painter->setBrush(gradient);
-                painter->drawRect(rect.adjusted(3, 3, -3, -3));
+                painter->drawRect(rect.adjusted(checkMarkPadding, checkMarkPadding, -checkMarkPadding, -checkMarkPadding));
 
             } else if (checkbox->state & (State_On)) {
-                QPen checkPen = QPen(checkMarkColor, 1.8);
+                QPen checkPen = QPen(checkMarkColor, QStyleHelper::dpiScaled(1.8));
                 checkMarkColor.setAlpha(210);
                 painter->translate(-1, 0.5);
                 painter->setPen(checkPen);
@@ -771,9 +764,9 @@ void QFusionStyle::drawPrimitive(PrimitiveElement elem,
 
                 // Draw checkmark
                 QPainterPath path;
-                path.moveTo(5, rect.height() / 2.0);
-                path.lineTo(rect.width() / 2.0 - 0, rect.height() - 3);
-                path.lineTo(rect.width() - 2.5, 3);
+                path.moveTo(2 + checkMarkPadding, rect.height() / 2.0);
+                path.lineTo(rect.width() / 2.0, rect.height() - checkMarkPadding);
+                path.lineTo(rect.width() - checkMarkPadding - 0.5, checkMarkPadding);
                 painter->drawPath(path.translated(rect.topLeft()));
             }
         }
@@ -786,7 +779,9 @@ void QFusionStyle::drawPrimitive(PrimitiveElement elem,
         painter->setBrush((state & State_Sunken) ? pressedColor : option->palette.base().color());
         painter->setRenderHint(QPainter::Antialiasing, true);
         QPainterPath circle;
-        circle.addEllipse(rect.center() + QPoint(1.0, 1.0), 6.5, 6.5);
+        const QPointF circleCenter = rect.center() + QPoint(1, 1);
+        const qreal outlineRadius = (rect.width() + (rect.width() + 1) % 2) / 2.0 - 1;
+        circle.addEllipse(circleCenter, outlineRadius, outlineRadius);
         painter->setPen(QPen(option->palette.background().color().darker(150)));
         if (option->state & State_HasFocus && option->state & State_KeyboardFocusChange)
             painter->setPen(QPen(highlightedOutline));
@@ -794,7 +789,8 @@ void QFusionStyle::drawPrimitive(PrimitiveElement elem,
 
         if (state & (State_On )) {
             circle = QPainterPath();
-            circle.addEllipse(rect.center() + QPoint(1, 1), 2.8, 2.8);
+            const qreal checkmarkRadius = outlineRadius / 2.32;
+            circle.addEllipse(circleCenter, checkmarkRadius, checkmarkRadius);
             QColor checkMarkColor = option->palette.text().color().darker(120);
             checkMarkColor.setAlpha(200);
             painter->setPen(checkMarkColor);
@@ -955,7 +951,7 @@ void QFusionStyle::drawPrimitive(PrimitiveElement elem,
     {
         Q_D(const QFusionStyle);
         if (d->tabBarcloseButtonIcon.isNull())
-            d->tabBarcloseButtonIcon = standardIcon(SP_DialogCloseButton, option, widget);
+            d->tabBarcloseButtonIcon = proxy()->standardIcon(SP_DialogCloseButton, option, widget);
         if ((option->state & State_Enabled) && (option->state & State_MouseOver))
             proxy()->drawPrimitive(PE_PanelButtonCommand, option, painter, widget);
         QPixmap pixmap = d->tabBarcloseButtonIcon.pixmap(QSize(16, 16), QIcon::Normal, QIcon::On);
@@ -1604,8 +1600,8 @@ void QFusionStyle::drawControl(ControlElement element, const QStyleOption *optio
                 else
                     pixmap = menuItem->icon.pixmap(iconSize, mode);
 
-                int pixw = pixmap.width();
-                int pixh = pixmap.height();
+                const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                const int pixh = pixmap.height() / pixmap.devicePixelRatio();
 
                 QRect pmr(0, 0, pixw, pixh);
                 pmr.moveCenter(vCheckRect.center());
@@ -2379,7 +2375,7 @@ void QFusionStyle::drawComplexControl(ComplexControl control, const QStyleOption
                     } else {
                         QStyleOption tool(0);
                         tool.palette = titleBar->palette;
-                        QPixmap pm = standardIcon(SP_TitleBarMenuButton, &tool, widget).pixmap(16, 16);
+                        QPixmap pm = proxy()->standardIcon(SP_TitleBarMenuButton, &tool, widget).pixmap(16, 16);
                         tool.rect = iconRect;
                         painter->save();
                         proxy()->drawItemPixmap(painter, iconRect, Qt::AlignCenter, pm);
@@ -3016,97 +3012,117 @@ void QFusionStyle::drawComplexControl(ComplexControl control, const QStyleOption
 */
 int QFusionStyle::pixelMetric(PixelMetric metric, const QStyleOption *option, const QWidget *widget) const
 {
+    int val = -1;
     switch (metric) {
     case PM_SliderTickmarkOffset:
-        return 4;
+        val = 4;
+        break;
     case PM_HeaderMargin:
-        return 2;
     case PM_ToolTipLabelFrameWidth:
-        return 2;
+        val = 2;
+        break;
     case PM_ButtonDefaultIndicator:
-        return 0;
     case PM_ButtonShiftHorizontal:
     case PM_ButtonShiftVertical:
-        return 0;
+        val = 0;
+        break;
     case PM_MessageBoxIconSize:
-        return 48;
+        val = 48;
+        break;
     case PM_ListViewIconSize:
-        return 24;
+        val = 24;
+        break;
     case PM_DialogButtonsSeparator:
     case PM_ScrollBarSliderMin:
-        return 26;
+        val = 26;
+        break;
     case PM_TitleBarHeight:
-        return 24;
+        val = 24;
+        break;
     case PM_ScrollBarExtent:
-        return 14;
+        val = 14;
+        break;
     case PM_SliderThickness:
-        return 15;
     case PM_SliderLength:
-        return 15;
+        val = 15;
+        break;
     case PM_DockWidgetTitleMargin:
-        return 1;
-    case PM_DefaultFrameWidth:
-        return 1;
+        val = 1;
+        break;
     case PM_SpinBoxFrameWidth:
-        return 3;
+        val = 3;
+        break;
     case PM_MenuVMargin:
     case PM_MenuHMargin:
-        return 0;
     case PM_MenuPanelWidth:
-        return 0;
+        val = 0;
+        break;
     case PM_MenuBarItemSpacing:
-        return 6;
+        val = 6;
+        break;
     case PM_MenuBarVMargin:
-        return 0;
     case PM_MenuBarHMargin:
-        return 0;
     case PM_MenuBarPanelWidth:
-        return 0;
+        val = 0;
+        break;
     case PM_ToolBarHandleExtent:
-        return 9;
+        val = 9;
+        break;
     case PM_ToolBarItemSpacing:
-        return 1;
+        val = 1;
+        break;
     case PM_ToolBarFrameWidth:
-        return 2;
     case PM_ToolBarItemMargin:
-        return 2;
+        val = 2;
+        break;
     case PM_SmallIconSize:
-        return 16;
     case PM_ButtonIconSize:
-        return 16;
+        val = 16;
+        break;
     case PM_DockWidgetTitleBarButtonMargin:
-        return 2;
+        val = 2;
+        break;
     case PM_MaximumDragDistance:
-        return -1;
+        return -1; // Do not dpi-scale because the value is magic
     case PM_TabCloseIndicatorWidth:
     case PM_TabCloseIndicatorHeight:
-        return 20;
+        val = 20;
+        break;
     case PM_TabBarTabVSpace:
-        return 12;
+        val = 12;
+        break;
     case PM_TabBarTabOverlap:
-        return 1;
+        val = 1;
+        break;
     case PM_TabBarBaseOverlap:
-        return 2;
+        val = 2;
+        break;
     case PM_SubMenuOverlap:
-        return -1;
+        return -1; // Do not dpi-scale because the value is magic
     case PM_DockWidgetHandleExtent:
     case PM_SplitterWidth:
-        return 4;
+        val = 4;
+        break;
     case PM_IndicatorHeight:
     case PM_IndicatorWidth:
     case PM_ExclusiveIndicatorHeight:
     case PM_ExclusiveIndicatorWidth:
-        return 14;
+        val = 14;
+        break;
     case PM_ScrollView_ScrollBarSpacing:
-        return 0;
+        val = 0;
+        break;
     case PM_ScrollView_ScrollBarOverlap:
         if (proxy()->styleHint(SH_ScrollBar_Transient, option, widget))
             return proxy()->pixelMetric(PM_ScrollBarExtent, option, widget);
-        return 0;
-    default:
+        val = 0;
         break;
+    case PM_DefaultFrameWidth:
+        return 1; // Do not dpi-scale because the drawn frame is always exactly 1 pixel thick
+    default:
+        return QCommonStyle::pixelMetric(metric, option, widget);
     }
-    return QCommonStyle::pixelMetric(metric, option, widget);
+    return QStyleHelper::dpiScaled(val);
 }
 
 /*!
@@ -3309,14 +3325,15 @@ QRect QFusionStyle::subControlRect(ComplexControl control, const QStyleOptionCom
                 break;
             case SC_SliderGroove: {
                 QPoint grooveCenter = slider->rect.center();
+                const int grooveThickness = QStyleHelper::dpiScaled(7);
                 if (slider->orientation == Qt::Horizontal) {
-                    rect.setHeight(7);
+                    rect.setHeight(grooveThickness);
                     if (slider->tickPosition & QSlider::TicksAbove)
                         grooveCenter.ry() += tickSize;
                     if (slider->tickPosition & QSlider::TicksBelow)
                         grooveCenter.ry() -= tickSize;
                 } else {
-                    rect.setWidth(7);
+                    rect.setWidth(grooveThickness);
                     if (slider->tickPosition & QSlider::TicksAbove)
                         grooveCenter.rx() += tickSize;
                     if (slider->tickPosition & QSlider::TicksBelow)
@@ -3332,27 +3349,25 @@ QRect QFusionStyle::subControlRect(ComplexControl control, const QStyleOptionCom
         break;
     case CC_SpinBox:
         if (const QStyleOptionSpinBox *spinbox = qstyleoption_cast<const QStyleOptionSpinBox *>(option)) {
-            QSize bs;
             int center = spinbox->rect.height() / 2;
-            int fw = spinbox->frame ? proxy()->pixelMetric(PM_SpinBoxFrameWidth, spinbox, widget) : 0;
+            int fw = spinbox->frame ? 3 : 0; // Is drawn with 3 pixels width in drawComplexControl, independently from PM_SpinBoxFrameWidth
             int y = fw;
-            bs.setHeight(qMax(8, spinbox->rect.height()/2 - y));
-            bs.setWidth(14);
+            const int buttonWidth = QStyleHelper::dpiScaled(14);
             int x, lx, rx;
-            x = spinbox->rect.width() - y - bs.width() + 2;
+            x = spinbox->rect.width() - y - buttonWidth + 2;
             lx = fw;
             rx = x - fw;
             switch (subControl) {
             case SC_SpinBoxUp:
                 if (spinbox->buttonSymbols == QAbstractSpinBox::NoButtons)
                     return QRect();
-                rect = QRect(x, fw, bs.width(), center - fw);
+                rect = QRect(x, fw, buttonWidth, center - fw);
                 break;
             case SC_SpinBoxDown:
                 if (spinbox->buttonSymbols == QAbstractSpinBox::NoButtons)
                     return QRect();
 
-                rect = QRect(x, center, bs.width(), spinbox->rect.bottom() - center - fw + 1);
+                rect = QRect(x, center, buttonWidth, spinbox->rect.bottom() - center - fw + 1);
                 break;
             case SC_SpinBoxEditField:
                 if (spinbox->buttonSymbols == QAbstractSpinBox::NoButtons) {
diff --git a/src/widgets/styles/qfusionstyle_p.h b/src/widgets/styles/qfusionstyle_p.h
index ceee6f8b03..7d0326d0a1 100644
--- a/src/widgets/styles/qfusionstyle_p.h
+++ b/src/widgets/styles/qfusionstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qfusionstyle_p_p.h b/src/widgets/styles/qfusionstyle_p_p.h
index a76ed24a4a..f0f00c4311 100644
--- a/src/widgets/styles/qfusionstyle_p_p.h
+++ b/src/widgets/styles/qfusionstyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtk2painter.cpp b/src/widgets/styles/qgtk2painter.cpp
index 7b9bd975d8..399052f42a 100644
--- a/src/widgets/styles/qgtk2painter.cpp
+++ b/src/widgets/styles/qgtk2painter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtk2painter_p.h b/src/widgets/styles/qgtk2painter_p.h
index f1444a87de..432daaca29 100644
--- a/src/widgets/styles/qgtk2painter_p.h
+++ b/src/widgets/styles/qgtk2painter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtkglobal_p.h b/src/widgets/styles/qgtkglobal_p.h
index 06ed7cfce4..a88723f642 100644
--- a/src/widgets/styles/qgtkglobal_p.h
+++ b/src/widgets/styles/qgtkglobal_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtkpainter.cpp b/src/widgets/styles/qgtkpainter.cpp
index a733049f65..a9efb9bef8 100644
--- a/src/widgets/styles/qgtkpainter.cpp
+++ b/src/widgets/styles/qgtkpainter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtkpainter_p.h b/src/widgets/styles/qgtkpainter_p.h
index 12d4dc9bc4..9dbf6ef04a 100644
--- a/src/widgets/styles/qgtkpainter_p.h
+++ b/src/widgets/styles/qgtkpainter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtkstyle.cpp b/src/widgets/styles/qgtkstyle.cpp
index 8ca6898b3d..6f2a2046b7 100644
--- a/src/widgets/styles/qgtkstyle.cpp
+++ b/src/widgets/styles/qgtkstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1775,7 +1767,7 @@ void QGtkStyle::drawComplexControl(ComplexControl control, const QStyleOptionCom
                     } else {
                         QStyleOption tool(0);
                         tool.palette = titleBar->palette;
-                        QPixmap pm = standardIcon(SP_TitleBarMenuButton, &tool, widget).pixmap(16, 16);
+                        QPixmap pm = proxy()->standardIcon(SP_TitleBarMenuButton, &tool, widget).pixmap(16, 16);
                         tool.rect = iconRect;
                         painter->save();
                         proxy()->drawItemPixmap(painter, iconRect, Qt::AlignCenter, pm);
@@ -3244,8 +3236,8 @@ void QGtkStyle::drawControl(ControlElement element,
                 else
                     pixmap = menuItem->icon.pixmap(iconSize, mode);
 
-                int pixw = pixmap.width();
-                int pixh = pixmap.height();
+                const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                const int pixh = pixmap.height() / pixmap.devicePixelRatio();
                 QRect pmr(0, 0, pixw, pixh);
                 pmr.moveCenter(vCheckRect.center() - QPoint(0, 1));
                 painter->setPen(menuItem->palette.text().color());
diff --git a/src/widgets/styles/qgtkstyle_p.cpp b/src/widgets/styles/qgtkstyle_p.cpp
index 2c64225c70..06ee74bdfe 100644
--- a/src/widgets/styles/qgtkstyle_p.cpp
+++ b/src/widgets/styles/qgtkstyle_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtkstyle_p.h b/src/widgets/styles/qgtkstyle_p.h
index 93bb0d309b..d8a4fb093d 100644
--- a/src/widgets/styles/qgtkstyle_p.h
+++ b/src/widgets/styles/qgtkstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qgtkstyle_p_p.h b/src/widgets/styles/qgtkstyle_p_p.h
index 1a8aa77042..0076f14ba3 100644
--- a/src/widgets/styles/qgtkstyle_p_p.h
+++ b/src/widgets/styles/qgtkstyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qmacstyle_mac.mm b/src/widgets/styles/qmacstyle_mac.mm
index 70daafc88c..82718eea7f 100644
--- a/src/widgets/styles/qmacstyle_mac.mm
+++ b/src/widgets/styles/qmacstyle_mac.mm
@@ -153,13 +153,32 @@ static uint qHash(const QPointer<QObject> &ptr)
     return qHash(ptr.data());
 }
 
-// These colors specify the titlebar gradient colors on
-// Leopard. Ideally we should get them from the system.
-static const QColor titlebarGradientActiveBegin(220, 220, 220);
-static const QColor titlebarGradientActiveEnd(151, 151, 151);
+// Title bar gradient colors for Lion were determined by inspecting PSDs exported
+// using CoreUI's CoreThemeDocument; there is no public API to retrieve them
+
+static QLinearGradient titlebarGradientActive()
+{
+    static QLinearGradient gradient;
+    if (gradient == QLinearGradient()) {
+        gradient.setColorAt(0, QColor(235, 235, 235));
+        gradient.setColorAt(0.5, QColor(210, 210, 210));
+        gradient.setColorAt(0.75, QColor(195, 195, 195));
+        gradient.setColorAt(1, QColor(180, 180, 180));
+    }
+    return gradient;
+}
+
+static QLinearGradient titlebarGradientInactive()
+{
+    static QLinearGradient gradient;
+    if (gradient == QLinearGradient()) {
+        gradient.setColorAt(0, QColor(250, 250, 250));
+        gradient.setColorAt(1, QColor(225, 225, 225));
+    }
+    return gradient;
+}
+
 static const QColor titlebarSeparatorLineActive(111, 111, 111);
-static const QColor titlebarGradientInactiveBegin(241, 241, 241);
-static const QColor titlebarGradientInactiveEnd(207, 207, 207);
 static const QColor titlebarSeparatorLineInactive(131, 131, 131);
 
 // Gradient colors used for the dock widget title bar and
@@ -476,6 +495,18 @@ static QString qt_mac_removeMnemonics(const QString &original)
             --l;
             if (l == 0)
                 break;
+        } else if (original.at(currPos) == QLatin1Char('(') && l >= 4 &&
+                   original.at(currPos + 1) == QLatin1Char('&') &&
+                   original.at(currPos + 2) != QLatin1Char('&') &&
+                   original.at(currPos + 3) == QLatin1Char(')')) {
+            /* remove mnemonics its format is "\s*(&X)" */
+            int n = 0;
+            while (finalDest > n && returnText.at(finalDest - n - 1).isSpace())
+                ++n;
+            finalDest -= n;
+            currPos += 4;
+            l -= 4;
+            continue;
         }
         returnText[finalDest] = original.at(currPos);
         ++currPos;
@@ -527,25 +558,6 @@ public:
 };
 } // anonymous namespace
 
-static QColor qcolorFromCGColor(CGColorRef cgcolor)
-{
-    QColor pc;
-    CGColorSpaceModel model = CGColorSpaceGetModel(CGColorGetColorSpace(cgcolor));
-    const CGFloat *components = CGColorGetComponents(cgcolor);
-    if (model == kCGColorSpaceModelRGB) {
-        pc.setRgbF(components[0], components[1], components[2], components[3]);
-    } else if (model == kCGColorSpaceModelCMYK) {
-        pc.setCmykF(components[0], components[1], components[2], components[3]);
-    } else if (model == kCGColorSpaceModelMonochrome) {
-        pc.setRgbF(components[0], components[0], components[0], components[1]);
-    } else {
-        // Colorspace we can't deal with.
-        qWarning("Qt: qcolorFromCGColor: cannot convert from colorspace model: %d", model);
-        Q_ASSERT(false);
-    }
-    return pc;
-}
-
 OSStatus qt_mac_shape2QRegionHelper(int inMessage, HIShapeRef, const CGRect *inRect, void *inRefcon)
 {
     QRegion *region = static_cast<QRegion *>(inRefcon);
@@ -703,7 +715,6 @@ static bool qt_macWindowMainWindow(const QWidget *window)
 const int qt_mac_hitheme_version = 0; //the HITheme version we speak
 const int macItemFrame         = 2;    // menu item frame width
 const int macItemHMargin       = 3;    // menu item hor text margin
-const int macItemVMargin       = 2;    // menu item ver text margin
 const int macRightBorder       = 12;   // right border on mac
 const ThemeWindowType QtWinType = kThemeDocumentWindow; // Window type we use for QTitleBar.
 QPixmap *qt_mac_backgroundPattern = 0; // stores the standard widget background.
@@ -3064,7 +3075,7 @@ QPixmap QMacStyle::standardPixmap(StandardPixmap standardPixmap, const QStyleOpt
         return QCommonStyle::standardPixmap(standardPixmap, opt, widget);
 
     recursionGuard = true;
-    QIcon icon = standardIcon(standardPixmap, opt, widget);
+    QIcon icon = proxy()->standardIcon(standardPixmap, opt, widget);
     recursionGuard = false;
     int size;
     switch (standardPixmap) {
@@ -3380,7 +3391,8 @@ void QMacStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt, QPai
         [triangleCell setButtonType:NSOnOffButton];
         [triangleCell setState:(opt->state & State_Open) ? NSOnState : NSOffState];
         [triangleCell setBezelStyle:NSDisclosureBezelStyle];
-        [triangleCell setBackgroundStyle:((opt->state & State_Selected) && w->hasFocus()) ? NSBackgroundStyleDark : NSBackgroundStyleLight];
+        bool viewHasFocus = (w && w->hasFocus()) || (opt->state & State_HasFocus);
+        [triangleCell setBackgroundStyle:((opt->state & State_Selected) && viewHasFocus) ? NSBackgroundStyleDark : NSBackgroundStyleLight];
 
         CGContextSaveGState(cg);
         [NSGraphicsContext saveGraphicsState];
@@ -3493,14 +3505,15 @@ void QMacStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt, QPai
         } break;
     case PE_PanelStatusBar: {
         // Fill the status bar with the titlebar gradient.
-        QLinearGradient linearGrad(0, opt->rect.top(), 0, opt->rect.bottom());
+        QLinearGradient linearGrad;
         if (w ? qt_macWindowMainWindow(w->window()) : (opt->state & QStyle::State_Active)) {
-            linearGrad.setColorAt(0, titlebarGradientActiveBegin);
-            linearGrad.setColorAt(1, titlebarGradientActiveEnd);
+            linearGrad = titlebarGradientActive();
         } else {
-            linearGrad.setColorAt(0, titlebarGradientInactiveBegin);
-            linearGrad.setColorAt(1, titlebarGradientInactiveEnd);
+            linearGrad = titlebarGradientInactive();
         }
+
+        linearGrad.setStart(0, opt->rect.top());
+        linearGrad.setFinalStop(0, opt->rect.bottom());
         p->fillRect(opt->rect, linearGrad);
 
         // Draw the black separator line at the top of the status bar.
@@ -5175,7 +5188,7 @@ QRect QMacStyle::subElementRect(SubElement sr, const QStyleOption *opt,
 
                 QRect closeRect;
                 if (canClose) {
-                    QSize sz = standardIcon(QStyle::SP_TitleBarCloseButton,
+                    QSize sz = proxy()->standardIcon(QStyle::SP_TitleBarCloseButton,
                                             opt, widget).actualSize(QSize(iconSize, iconSize));
                     sz += QSize(buttonMargin, buttonMargin);
                     if (verticalTitleBar)
@@ -5192,7 +5205,7 @@ QRect QMacStyle::subElementRect(SubElement sr, const QStyleOption *opt,
 
                 QRect floatRect;
                 if (canFloat) {
-                    QSize sz = standardIcon(QStyle::SP_TitleBarNormalButton,
+                    QSize sz = proxy()->standardIcon(QStyle::SP_TitleBarNormalButton,
                                             opt, widget).actualSize(QSize(iconSize, iconSize));
                     sz += QSize(buttonMargin, buttonMargin);
                     if (verticalTitleBar)
diff --git a/src/widgets/styles/qmacstyle_mac_p.h b/src/widgets/styles/qmacstyle_mac_p.h
index b0fb9e06be..a59de07752 100644
--- a/src/widgets/styles/qmacstyle_mac_p.h
+++ b/src/widgets/styles/qmacstyle_mac_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qmacstyle_mac_p_p.h b/src/widgets/styles/qmacstyle_mac_p_p.h
index 8fdeab9163..b6267c43e6 100644
--- a/src/widgets/styles/qmacstyle_mac_p_p.h
+++ b/src/widgets/styles/qmacstyle_mac_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qproxystyle.cpp b/src/widgets/styles/qproxystyle.cpp
index eeed1a532b..34e821ebdd 100644
--- a/src/widgets/styles/qproxystyle.cpp
+++ b/src/widgets/styles/qproxystyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qproxystyle.h b/src/widgets/styles/qproxystyle.h
index 5864c195c6..24779925a5 100644
--- a/src/widgets/styles/qproxystyle.h
+++ b/src/widgets/styles/qproxystyle.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qproxystyle_p.h b/src/widgets/styles/qproxystyle_p.h
index 92f6f73ccc..67f63d9526 100644
--- a/src/widgets/styles/qproxystyle_p.h
+++ b/src/widgets/styles/qproxystyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstyle.cpp b/src/widgets/styles/qstyle.cpp
index 4c5c7cd17e..8bff3e4fd3 100644
--- a/src/widgets/styles/qstyle.cpp
+++ b/src/widgets/styles/qstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1470,6 +1462,9 @@ void QStyle::drawItemPixmap(QPainter *painter, const QRect &rect, int alignment,
     \value PM_TabCloseIndicatorWidth The default width of a close button on a tab in a tab bar.
     \value PM_TabCloseIndicatorHeight The default height of a close button on a tab in a tab bar.
 
+    \value PM_TreeViewIndentation The indentation of items in a tree view.
+           This enum value has been introduced in Qt 5.4.
+
     \value PM_CustomBase Base value for custom pixel metrics.  Custom
     values must be greater than this value.
 
@@ -1784,6 +1779,9 @@ void QStyle::drawItemPixmap(QPainter *painter, const QRect &rect, int alignment,
     \value SH_LineEdit_PasswordCharacter  The Unicode character to be
     used for passwords.
 
+    \value SH_LineEdit_PasswordMaskDelay  Determines the delay before visible character is masked
+    with password character, in milliseconds. This enum value was added in Qt 5.4.
+
     \value SH_Table_GridLineColor The RGB value of the grid for a table.
 
     \value SH_UnderlineShortcut  Whether shortcuts are underlined.
@@ -1927,6 +1925,10 @@ void QStyle::drawItemPixmap(QPainter *painter, const QRect &rect, int alignment,
     \value SH_Splitter_OpaqueResize Determines if resizing is opaque
            This enum value has been introduced in Qt 5.2
 
+    \value SH_TabBar_ChangeCurrentDelay Determines the delay before the current
+           tab is changed while dragging over the tabbar, in milliseconds. This
+           enum value has been introduced in Qt 5.4
+
     \sa styleHint()
 */
 
diff --git a/src/widgets/styles/qstyle.h b/src/widgets/styles/qstyle.h
index 136daa9abd..681f3e0468 100644
--- a/src/widgets/styles/qstyle.h
+++ b/src/widgets/styles/qstyle.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -66,6 +58,9 @@ class Q_WIDGETS_EXPORT QStyle : public QObject
 {
     Q_OBJECT
     Q_DECLARE_PRIVATE(QStyle)
+    Q_ENUMS(StateFlag PrimitiveElement ControlElement SubElement ComplexControl)
+    Q_ENUMS(SubControl PixelMetric ContentsType RequestSoftwareInputPanel StyleHint)
+    Q_ENUMS(StandardPixmap)
 
 protected:
     QStyle(QStylePrivate &dd);
@@ -553,6 +548,7 @@ public:
         PM_ScrollView_ScrollBarSpacing,
         PM_ScrollView_ScrollBarOverlap,
         PM_SubMenuOverlap,
+        PM_TreeViewIndentation,
 
         // do not add any values below/greater than this
         PM_CustomBase = 0xf0000000
@@ -703,6 +699,8 @@ public:
         SH_Widget_Animate,
         SH_Splitter_OpaqueResize,
         SH_ComboBox_UseNativePopup,
+        SH_LineEdit_PasswordMaskDelay,
+        SH_TabBar_ChangeCurrentDelay,
         // Add new style hint values here
 
         SH_CustomBase = 0xf0000000
diff --git a/src/widgets/styles/qstyle_p.h b/src/widgets/styles/qstyle_p.h
index 9f25492173..572d3d9fa7 100644
--- a/src/widgets/styles/qstyle_p.h
+++ b/src/widgets/styles/qstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstyleanimation.cpp b/src/widgets/styles/qstyleanimation.cpp
index 6668be8307..beec7c745b 100644
--- a/src/widgets/styles/qstyleanimation.cpp
+++ b/src/widgets/styles/qstyleanimation.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -53,7 +45,7 @@ static const qreal ScrollBarFadeOutDuration = 200.0;
 static const qreal ScrollBarFadeOutDelay = 450.0;
 
 QStyleAnimation::QStyleAnimation(QObject *target) : QAbstractAnimation(target),
-    _delay(0), _duration(-1), _startTime(QTime::currentTime())
+    _delay(0), _duration(-1), _startTime(QTime::currentTime()), _fps(ThirtyFps), _skip(0)
 {
 }
 
@@ -96,6 +88,16 @@ void QStyleAnimation::setStartTime(const QTime &time)
     _startTime = time;
 }
 
+QStyleAnimation::FrameRate QStyleAnimation::frameRate() const
+{
+    return _fps;
+}
+
+void QStyleAnimation::setFrameRate(FrameRate fps)
+{
+    _fps = fps;
+}
+
 void QStyleAnimation::updateTarget()
 {
     QEvent event(QEvent::StyleAnimationUpdate);
@@ -105,6 +107,12 @@ void QStyleAnimation::updateTarget()
         stop();
 }
 
+void QStyleAnimation::start()
+{
+    _skip = 0;
+    QAbstractAnimation::start(DeleteWhenStopped);
+}
+
 bool QStyleAnimation::isUpdateNeeded() const
 {
     return currentTime() > _delay;
@@ -112,8 +120,11 @@ bool QStyleAnimation::isUpdateNeeded() const
 
 void QStyleAnimation::updateCurrentTime(int)
 {
-    if (target() && isUpdateNeeded())
-        updateTarget();
+    if (++_skip >= _fps) {
+        _skip = 0;
+        if (target() && isUpdateNeeded())
+            updateTarget();
+    }
 }
 
 QProgressStyleAnimation::QProgressStyleAnimation(int speed, QObject *target) :
diff --git a/src/widgets/styles/qstyleanimation_p.h b/src/widgets/styles/qstyleanimation_p.h
index 33868a3440..a9f9325826 100644
--- a/src/widgets/styles/qstyleanimation_p.h
+++ b/src/widgets/styles/qstyleanimation_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -80,8 +72,21 @@ public:
     QTime startTime() const;
     void setStartTime(const QTime &time);
 
+    enum FrameRate {
+        DefaultFps,
+        SixtyFps,
+        ThirtyFps,
+        TwentyFps
+    };
+
+    FrameRate frameRate() const;
+    void setFrameRate(FrameRate fps);
+
     void updateTarget();
 
+public Q_SLOTS:
+    void start();
+
 protected:
     virtual bool isUpdateNeeded() const;
     virtual void updateCurrentTime(int time);
@@ -90,6 +95,8 @@ private:
     int _delay;
     int _duration;
     QTime _startTime;
+    FrameRate _fps;
+    int _skip;
 };
 
 class QProgressStyleAnimation : public QStyleAnimation
diff --git a/src/widgets/styles/qstylefactory.cpp b/src/widgets/styles/qstylefactory.cpp
index 2b81acf246..c4f1cb1d4a 100644
--- a/src/widgets/styles/qstylefactory.cpp
+++ b/src/widgets/styles/qstylefactory.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstylefactory.h b/src/widgets/styles/qstylefactory.h
index 539f47464b..36c23a3a39 100644
--- a/src/widgets/styles/qstylefactory.h
+++ b/src/widgets/styles/qstylefactory.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstylehelper.cpp b/src/widgets/styles/qstylehelper.cpp
index 49e406a8b7..63cd0a0785 100644
--- a/src/widgets/styles/qstylehelper.cpp
+++ b/src/widgets/styles/qstylehelper.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstylehelper_p.h b/src/widgets/styles/qstylehelper_p.h
index 1229af7497..a4ab295f16 100644
--- a/src/widgets/styles/qstylehelper_p.h
+++ b/src/widgets/styles/qstylehelper_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstyleoption.cpp b/src/widgets/styles/qstyleoption.cpp
index 5913b2f261..1d98a56063 100644
--- a/src/widgets/styles/qstyleoption.cpp
+++ b/src/widgets/styles/qstyleoption.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -3702,6 +3694,8 @@ QStyleOptionGraphicsItem::QStyleOptionGraphicsItem(int version)
     of the painter used to draw the item. By default, if no
     transformations are applied, its value is 1. If zoomed out 1:2, the level
     of detail will be 0.5, and if zoomed in 2:1, its value is 2.
+
+    \sa QGraphicsScene::minimumRenderSize()
 */
 qreal QStyleOptionGraphicsItem::levelOfDetailFromTransform(const QTransform &worldTransform)
 {
diff --git a/src/widgets/styles/qstyleoption.h b/src/widgets/styles/qstyleoption.h
index 4f817a3353..a475f485df 100644
--- a/src/widgets/styles/qstyleoption.h
+++ b/src/widgets/styles/qstyleoption.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -619,7 +611,7 @@ public:
     enum StyleOptionType { Type = SO_GroupBox };
     enum StyleOptionVersion { Version = 1 };
 
-    QStyleOptionFrameV2::FrameFeatures features;
+    QStyleOptionFrame::FrameFeatures features;
     QString text;
     Qt::Alignment textAlignment;
     QColor textColor;
@@ -666,9 +658,10 @@ protected:
 template <typename T>
 T qstyleoption_cast(const QStyleOption *opt)
 {
-    if (opt && opt->version >= static_cast<T>(0)->Version && (opt->type == static_cast<T>(0)->Type
-        || int(static_cast<T>(0)->Type) == QStyleOption::SO_Default
-        || (int(static_cast<T>(0)->Type) == QStyleOption::SO_Complex
+    typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type Opt;
+    if (opt && opt->version >= Opt::Version && (opt->type == Opt::Type
+        || int(Opt::Type) == QStyleOption::SO_Default
+        || (int(Opt::Type) == QStyleOption::SO_Complex
             && opt->type > QStyleOption::SO_Complex)))
         return static_cast<T>(opt);
     return 0;
@@ -677,9 +670,10 @@ T qstyleoption_cast(const QStyleOption *opt)
 template <typename T>
 T qstyleoption_cast(QStyleOption *opt)
 {
-    if (opt && opt->version >= static_cast<T>(0)->Version && (opt->type == static_cast<T>(0)->Type
-        || int(static_cast<T>(0)->Type) == QStyleOption::SO_Default
-        || (int(static_cast<T>(0)->Type) == QStyleOption::SO_Complex
+    typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type Opt;
+    if (opt && opt->version >= Opt::Version && (opt->type == Opt::Type
+        || int(Opt::Type) == QStyleOption::SO_Default
+        || (int(Opt::Type) == QStyleOption::SO_Complex
             && opt->type > QStyleOption::SO_Complex)))
         return static_cast<T>(opt);
     return 0;
@@ -727,8 +721,9 @@ public:
 template <typename T>
 T qstyleoption_cast(const QStyleHintReturn *hint)
 {
-    if (hint && hint->version <= static_cast<T>(0)->Version &&
-        (hint->type == static_cast<T>(0)->Type || int(static_cast<T>(0)->Type) == QStyleHintReturn::SH_Default))
+    typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type Opt;
+    if (hint && hint->version <= Opt::Version &&
+        (hint->type == Opt::Type || int(Opt::Type) == QStyleHintReturn::SH_Default))
         return static_cast<T>(hint);
     return 0;
 }
@@ -736,8 +731,9 @@ T qstyleoption_cast(const QStyleHintReturn *hint)
 template <typename T>
 T qstyleoption_cast(QStyleHintReturn *hint)
 {
-    if (hint && hint->version <= static_cast<T>(0)->Version &&
-        (hint->type == static_cast<T>(0)->Type || int(static_cast<T>(0)->Type) == QStyleHintReturn::SH_Default))
+    typedef typename QtPrivate::remove_cv<typename QtPrivate::remove_pointer<T>::type>::type Opt;
+    if (hint && hint->version <= Opt::Version &&
+        (hint->type == Opt::Type || int(Opt::Type) == QStyleHintReturn::SH_Default))
         return static_cast<T>(hint);
     return 0;
 }
diff --git a/src/widgets/styles/qstylepainter.cpp b/src/widgets/styles/qstylepainter.cpp
index bc1fe748a8..aa439965e0 100644
--- a/src/widgets/styles/qstylepainter.cpp
+++ b/src/widgets/styles/qstylepainter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstylepainter.h b/src/widgets/styles/qstylepainter.h
index 2031921d12..9e96a40c58 100644
--- a/src/widgets/styles/qstylepainter.h
+++ b/src/widgets/styles/qstylepainter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstyleplugin.cpp b/src/widgets/styles/qstyleplugin.cpp
index 77f5bd30f4..73888ecfdf 100644
--- a/src/widgets/styles/qstyleplugin.cpp
+++ b/src/widgets/styles/qstyleplugin.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstyleplugin.h b/src/widgets/styles/qstyleplugin.h
index 041bdbfa68..72dd856cbb 100644
--- a/src/widgets/styles/qstyleplugin.h
+++ b/src/widgets/styles/qstyleplugin.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstylesheetstyle.cpp b/src/widgets/styles/qstylesheetstyle.cpp
index 60bfc8e075..a78990e79b 100644
--- a/src/widgets/styles/qstylesheetstyle.cpp
+++ b/src/widgets/styles/qstylesheetstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -645,6 +637,7 @@ static const char *knownStyleHints[] = {
     "icon-size",
     "leftarrow-icon",
     "lineedit-password-character",
+    "lineedit-password-mask-delay",
     "mdi-fill-space-on-maximize",
     "menu-scrollable",
     "menubar-altkey-navigation",
@@ -1826,7 +1819,7 @@ QRenderRule QStyleSheetStyle::renderRule(const QObject *obj, const QStyleOption
                 extraClass |= PseudoClass_Frameless;
 #endif // QT_NO_SPINBOX
         } else if (const QStyleOptionGroupBox *gb = qstyleoption_cast<const QStyleOptionGroupBox *>(opt)) {
-            if (gb->features & QStyleOptionFrameV2::Flat)
+            if (gb->features & QStyleOptionFrame::Flat)
                 extraClass |= PseudoClass_Flat;
             if (gb->lineWidth == 0)
                 extraClass |= PseudoClass_Frameless;
@@ -1933,10 +1926,8 @@ QRenderRule QStyleSheetStyle::renderRule(const QObject *obj, const QStyleOption
         } else if (const QStyleOptionFrame *frm = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
             if (frm->lineWidth == 0)
                 extraClass |= PseudoClass_Frameless;
-            if (const QStyleOptionFrameV2 *frame2 = qstyleoption_cast<const QStyleOptionFrameV2 *>(opt)) {
-                if (frame2->features & QStyleOptionFrameV2::Flat)
-                    extraClass |= PseudoClass_Flat;
-            }
+            if (frm->features & QStyleOptionFrame::Flat)
+                extraClass |= PseudoClass_Flat;
         }
 #ifndef QT_NO_TOOLBAR
         else if (const QStyleOptionToolBar *tb = qstyleoption_cast<const QStyleOptionToolBar *>(opt)) {
@@ -2044,7 +2035,6 @@ bool QStyleSheetStyle::hasStyleRule(const QObject *obj, int part) const
     }
 
     QString pseudoElement = QLatin1String(knownPseudoElements[part].name);
-    QVector<Declaration> declarations;
     for (int i = 0; i < rules.count(); i++) {
         const Selector& selector = rules.at(i).selectors.at(0);
         if (pseudoElement.compare(selector.pseudoElement(), Qt::CaseInsensitive) == 0) {
@@ -2994,7 +2984,7 @@ void QStyleSheetStyle::drawComplexControl(ComplexControl cc, const QStyleOptionC
             }
 
             frameRect = subControlRect(CC_GroupBox, opt, SC_GroupBoxFrame, w);
-            QStyleOptionFrameV2 frame;
+            QStyleOptionFrame frame;
             frame.QStyleOption::operator=(*gb);
             frame.features = gb->features;
             frame.lineWidth = gb->lineWidth;
@@ -3583,8 +3573,8 @@ void QStyleSheetStyle::drawControl(ControlElement ce, const QStyleOption *opt, Q
                         pixmap = mi.icon.pixmap(pixelMetric(PM_SmallIconSize), mode, QIcon::On);
                     else
                         pixmap = mi.icon.pixmap(pixelMetric(PM_SmallIconSize), mode);
-                    int pixw = pixmap.width();
-                    int pixh = pixmap.height();
+                    const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                    const int pixh = pixmap.height() / pixmap.devicePixelRatio();
                     QRenderRule iconRule = renderRule(w, opt, PseudoElement_MenuIcon);
                     if (!iconRule.hasGeometry()) {
                         iconRule.geo = new QStyleSheetGeometryData(pixw, pixh, pixw, pixh, -1, -1);
@@ -4089,7 +4079,7 @@ void QStyleSheetStyle::drawControl(ControlElement ce, const QStyleOption *opt, Q
     case CE_ShapedFrame:
         if (const QStyleOptionFrame *frm = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
             if (rule.hasNativeBorder()) {
-                QStyleOptionFrameV3 frmOpt(*frm);
+                QStyleOptionFrame frmOpt(*frm);
                 rule.configurePalette(&frmOpt.palette, QPalette::Text, QPalette::Base);
                 frmOpt.rect = rule.borderRect(frmOpt.rect);
                 baseStyle()->drawControl(ce, &frmOpt, p, w);
@@ -4224,10 +4214,8 @@ void QStyleSheetStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *op
     case PE_Frame:
         if (const QStyleOptionFrame *frm = qstyleoption_cast<const QStyleOptionFrame *>(opt)) {
             if (rule.hasNativeBorder()) {
-                QStyleOptionFrameV2 frmOpt(*frm);
+                QStyleOptionFrame frmOpt(*frm);
                 rule.configurePalette(&frmOpt.palette, QPalette::Text, QPalette::Base);
-                if (!qstyleoption_cast<const QStyleOptionFrameV3 *>(opt)) //if it comes from  CE_ShapedFrame, the margins are already sustracted
-                    frmOpt.rect = rule.borderRect(frmOpt.rect);
                 baseStyle()->drawPrimitive(pe, &frmOpt, p, w);
             } else {
                 rule.drawBorder(p, rule.borderRect(opt->rect));
@@ -5143,6 +5131,7 @@ int QStyleSheetStyle::styleHint(StyleHint sh, const QStyleOption *opt, const QWi
     QString s;
     switch (sh) {
         case SH_LineEdit_PasswordCharacter: s = QLatin1String("lineedit-password-character"); break;
+        case SH_LineEdit_PasswordMaskDelay: s = QLatin1String("lineedit-password-mask-delay"); break;
         case SH_DitherDisabledText: s = QLatin1String("dither-disabled-text"); break;
         case SH_EtchDisabledText: s = QLatin1String("etch-disabled-text"); break;
         case SH_ItemView_ActivateItemOnSingleClick: s = QLatin1String("activate-on-singleclick"); break;
@@ -5804,6 +5793,25 @@ QRect QStyleSheetStyle::subElementRect(SubElement se, const QStyleOption *opt, c
         break;
 #endif //QT_NO_TOOLBAR
 
+    // On mac we make pixel adjustments to layouts which are not
+    // desireable when you have custom style sheets on them
+    case SE_CheckBoxLayoutItem:
+    case SE_ComboBoxLayoutItem:
+    case SE_DateTimeEditLayoutItem:
+    case SE_LabelLayoutItem:
+    case SE_ProgressBarLayoutItem:
+    case SE_PushButtonLayoutItem:
+    case SE_RadioButtonLayoutItem:
+    case SE_SliderLayoutItem:
+    case SE_SpinBoxLayoutItem:
+    case SE_ToolButtonLayoutItem:
+    case SE_FrameLayoutItem:
+    case SE_GroupBoxLayoutItem:
+    case SE_TabWidgetLayoutItem:
+        if (!rule.hasNativeBorder())
+            return opt->rect;
+        break;
+
     default:
         break;
     }
diff --git a/src/widgets/styles/qstylesheetstyle_default.cpp b/src/widgets/styles/qstylesheetstyle_default.cpp
index bca4c8928a..817281f160 100644
--- a/src/widgets/styles/qstylesheetstyle_default.cpp
+++ b/src/widgets/styles/qstylesheetstyle_default.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qstylesheetstyle_p.h b/src/widgets/styles/qstylesheetstyle_p.h
index 9ca3c9ed24..c4e81787b5 100644
--- a/src/widgets/styles/qstylesheetstyle_p.h
+++ b/src/widgets/styles/qstylesheetstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowscestyle.cpp b/src/widgets/styles/qwindowscestyle.cpp
index 576dd4165e..d3a8877d00 100644
--- a/src/widgets/styles/qwindowscestyle.cpp
+++ b/src/widgets/styles/qwindowscestyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -679,8 +671,8 @@ void QWindowsCEStyle::drawControl(ControlElement element, const QStyleOption *op
                     pixmap = menuitem->icon.pixmap(pixelMetric(PM_SmallIconSize), mode, QIcon::On);
                 else
                     pixmap = menuitem->icon.pixmap(pixelMetric(PM_SmallIconSize), mode);
-                int pixw = pixmap.width();
-                int pixh = pixmap.height();
+                const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                const int pixh = pixmap.height() / pixmap.devicePixelRatio();
                 if (act && !dis && !checked)
                     qDrawPlainRect(painter, vCheckRect,  menuitem->palette.button().color(), 1,
                                     &menuitem->palette.brush(QPalette::Button));
diff --git a/src/widgets/styles/qwindowscestyle_p.h b/src/widgets/styles/qwindowscestyle_p.h
index d5e2ee84ed..ca2923911f 100644
--- a/src/widgets/styles/qwindowscestyle_p.h
+++ b/src/widgets/styles/qwindowscestyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowscestyle_p_p.h b/src/widgets/styles/qwindowscestyle_p_p.h
index f17aae7cbb..be73aa8b4f 100644
--- a/src/widgets/styles/qwindowscestyle_p_p.h
+++ b/src/widgets/styles/qwindowscestyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsmobilestyle.cpp b/src/widgets/styles/qwindowsmobilestyle.cpp
index 5e6a53ed78..4ff0248b0d 100644
--- a/src/widgets/styles/qwindowsmobilestyle.cpp
+++ b/src/widgets/styles/qwindowsmobilestyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsmobilestyle_p.h b/src/widgets/styles/qwindowsmobilestyle_p.h
index 75a4e45ea9..db0e85b7e6 100644
--- a/src/widgets/styles/qwindowsmobilestyle_p.h
+++ b/src/widgets/styles/qwindowsmobilestyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsmobilestyle_p_p.h b/src/widgets/styles/qwindowsmobilestyle_p_p.h
index 45e02fb379..da31319475 100644
--- a/src/widgets/styles/qwindowsmobilestyle_p_p.h
+++ b/src/widgets/styles/qwindowsmobilestyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsstyle.cpp b/src/widgets/styles/qwindowsstyle.cpp
index 9ab8f8f08a..708014a6df 100644
--- a/src/widgets/styles/qwindowsstyle.cpp
+++ b/src/widgets/styles/qwindowsstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -118,6 +110,9 @@ enum QSliderDirection { SlUp, SlDown, SlLeft, SlRight };
 /*
     \internal
 */
+
+int QWindowsStylePrivate::m_appDevicePixelRatio = 0;
+
 QWindowsStylePrivate::QWindowsStylePrivate()
     : alt_down(false), menuBarTimer(0)
 {
@@ -130,6 +125,13 @@ QWindowsStylePrivate::QWindowsStylePrivate()
 #endif
 }
 
+int QWindowsStylePrivate::appDevicePixelRatio()
+{
+    if (!QWindowsStylePrivate::m_appDevicePixelRatio)
+        QWindowsStylePrivate::m_appDevicePixelRatio = qRound(qApp->devicePixelRatio());
+    return QWindowsStylePrivate::m_appDevicePixelRatio;
+}
+
 // Returns \c true if the toplevel parent of \a widget has seen the Alt-key
 bool QWindowsStylePrivate::hasSeenAlt(const QWidget *widget) const
 {
@@ -295,32 +297,123 @@ void QWindowsStyle::polish(QPalette &pal)
     QCommonStyle::polish(pal);
 }
 
+int QWindowsStylePrivate::pixelMetricFromSystemDp(QStyle::PixelMetric pm, const QStyleOption *, const QWidget *widget)
+{
+    switch (pm) {
+#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
+    case QStyle::PM_DockWidgetFrameWidth:
+#  ifndef Q_OS_WINCE
+        return GetSystemMetrics(SM_CXFRAME);
+#  else
+        return GetSystemMetrics(SM_CXDLGFRAME);
+#  endif
+        break;
+
+    case QStyle::PM_TitleBarHeight:
+        if (widget && (widget->windowType() == Qt::Tool)) {
+            // MS always use one less than they say
+#  ifndef Q_OS_WINCE
+            return GetSystemMetrics(SM_CYSMCAPTION) - 1;
+#  else
+            return GetSystemMetrics(SM_CYCAPTION) - 1;
+#  endif
+        }
+        return GetSystemMetrics(SM_CYCAPTION) - 1;
+
+#  ifndef Q_OS_WINCE
+    case QStyle::PM_ScrollBarExtent:
+        {
+            NONCLIENTMETRICS ncm;
+            ncm.cbSize = FIELD_OFFSET(NONCLIENTMETRICS, lfMessageFont) + sizeof(LOGFONT);
+            if (SystemParametersInfo(SPI_GETNONCLIENTMETRICS, sizeof(NONCLIENTMETRICS), &ncm, 0))
+                return qMax(ncm.iScrollHeight, ncm.iScrollWidth);
+        }
+        break;
+#  endif // !Q_OS_WINCE
+
+    case  QStyle::PM_MdiSubWindowFrameWidth:
+#  ifndef Q_OS_WINCE
+        return GetSystemMetrics(SM_CYFRAME);
+#  else
+        return GetSystemMetrics(SM_CYDLGFRAME);
+#  endif
+#else
+    Q_UNUSED(widget)
+#endif // Q_OS_WIN
+
+    default:
+        break;
+    }
+    return QWindowsStylePrivate::InvalidMetric;
+}
+
+int QWindowsStylePrivate::fixedPixelMetric(QStyle::PixelMetric pm)
+{
+    switch (pm) {
+    case QStyle::PM_ToolBarItemSpacing:
+        return 0;
+    case QStyle::PM_ButtonDefaultIndicator:
+    case QStyle::PM_ButtonShiftHorizontal:
+    case QStyle::PM_ButtonShiftVertical:
+    case QStyle::PM_MenuHMargin:
+    case QStyle::PM_MenuVMargin:
+    case QStyle::PM_ToolBarItemMargin:
+        return 1;
+        break;
+    case QStyle::PM_DockWidgetSeparatorExtent:
+        return 4;
+#ifndef QT_NO_TABBAR
+    case QStyle::PM_TabBarTabShiftHorizontal:
+        return 0;
+    case QStyle::PM_TabBarTabShiftVertical:
+        return 2;
+#endif
+
+#ifndef QT_NO_SLIDER
+    case QStyle::PM_SliderLength:
+        return 11;
+#endif // QT_NO_SLIDER
+
+#ifndef QT_NO_MENU
+    case QStyle::PM_MenuBarHMargin:
+    case QStyle::PM_MenuBarVMargin:
+    case QStyle::PM_MenuBarPanelWidth:
+        return 0;
+    case QStyle::PM_SmallIconSize:
+        return 16;
+    case QStyle::PM_LargeIconSize:
+        return 32;
+    case QStyle::PM_DockWidgetTitleMargin:
+        return 2;
+    case QStyle::PM_DockWidgetTitleBarButtonMargin:
+    case QStyle::PM_DockWidgetFrameWidth:
+        return 4;
+
+#endif // QT_NO_MENU
+    case QStyle::PM_ToolBarHandleExtent:
+        return 10;
+    default:
+        break;
+    }
+    return QWindowsStylePrivate::InvalidMetric;
+}
+
 /*!
   \reimp
 */
 int QWindowsStyle::pixelMetric(PixelMetric pm, const QStyleOption *opt, const QWidget *widget) const
 {
-    int ret;
+    int ret = QWindowsStylePrivate::pixelMetricFromSystemDp(pm, opt, widget);
+    if (ret != QWindowsStylePrivate::InvalidMetric)
+        return ret / QWindowsStylePrivate::devicePixelRatio(widget);
+
+    ret = QWindowsStylePrivate::fixedPixelMetric(pm);
+    if (ret != QWindowsStylePrivate::InvalidMetric)
+        return int(QStyleHelper::dpiScaled(ret));
+
+    ret = 0;
 
     switch (pm) {
-    case PM_ButtonDefaultIndicator:
-    case PM_ButtonShiftHorizontal:
-    case PM_ButtonShiftVertical:
-    case PM_MenuHMargin:
-    case PM_MenuVMargin:
-        ret = 1;
-        break;
-    case PM_DockWidgetSeparatorExtent:
-        ret = int(QStyleHelper::dpiScaled(4.));
-        break;
-#ifndef QT_NO_TABBAR
-    case PM_TabBarTabShiftHorizontal:
-        ret = 0;
-        break;
-    case PM_TabBarTabShiftVertical:
-        ret = 2;
-        break;
-#endif
     case PM_MaximumDragDistance:
         ret = QCommonStyle::pixelMetric(PM_MaximumDragDistance);
         if (ret == -1)
@@ -328,10 +421,6 @@ int QWindowsStyle::pixelMetric(PixelMetric pm, const QStyleOption *opt, const QW
         break;
 
 #ifndef QT_NO_SLIDER
-    case PM_SliderLength:
-        ret = int(QStyleHelper::dpiScaled(11.));
-        break;
-
         // Returns the number of pixels to use for the business part of the
         // slider (i.e., the non-tickmark portion). The remaining space is shared
         // equally between the tickmark regions.
@@ -357,116 +446,18 @@ int QWindowsStyle::pixelMetric(PixelMetric pm, const QStyleOption *opt, const QW
             if (space > 0)
                 thick += (space * 2) / (n + 2);
             ret = thick;
-        } else {
-            ret = 0;
         }
         break;
 #endif // QT_NO_SLIDER
 
-#ifndef QT_NO_MENU
-    case PM_MenuBarHMargin:
-        ret = 0;
-        break;
-
-    case PM_MenuBarVMargin:
-        ret = 0;
-        break;
-
-    case PM_MenuBarPanelWidth:
-        ret = 0;
-        break;
-
-    case PM_SmallIconSize:
-        ret = int(QStyleHelper::dpiScaled(16.));
-        break;
-
-    case PM_LargeIconSize:
-        ret = int(QStyleHelper::dpiScaled(32.));
-        break;
-
     case PM_IconViewIconSize:
         ret = proxy()->pixelMetric(PM_LargeIconSize, opt, widget);
         break;
 
-    case PM_DockWidgetTitleMargin:
-        ret = int(QStyleHelper::dpiScaled(2.));
-        break;
-    case PM_DockWidgetTitleBarButtonMargin:
-        ret = int(QStyleHelper::dpiScaled(4.));
-        break;
-#if defined(Q_WS_WIN)
-    case PM_DockWidgetFrameWidth:
-#if defined(Q_OS_WINCE)
-        ret = GetSystemMetrics(SM_CXDLGFRAME);
-#else
-        ret = GetSystemMetrics(SM_CXFRAME);
-#endif
-        break;
-#else
-    case PM_DockWidgetFrameWidth:
-        ret = 4;
-        break;
-#endif // Q_WS_WIN
-    break;
-
-#endif // QT_NO_MENU
-
-
-#if defined(Q_OS_WIN)
-#ifndef Q_OS_WINRT // There is no title bar in Windows Runtime applications
-    case PM_TitleBarHeight:
-        if (widget && (widget->windowType() == Qt::Tool)) {
-            // MS always use one less than they say
-#if defined(Q_OS_WINCE)
-            ret = GetSystemMetrics(SM_CYCAPTION) - 1;
-#else
-            ret = GetSystemMetrics(SM_CYSMCAPTION) - 1;
-#endif
-        } else {
-            ret = GetSystemMetrics(SM_CYCAPTION) - 1;
-        }
-
-        break;
-#endif // !Q_OS_WINRT
-
-    case PM_ScrollBarExtent:
-        {
-#if !defined(Q_OS_WINCE) && !defined(Q_OS_WINRT)
-            NONCLIENTMETRICS ncm;
-            ncm.cbSize = FIELD_OFFSET(NONCLIENTMETRICS, lfMessageFont) + sizeof(LOGFONT);
-            if (SystemParametersInfo(SPI_GETNONCLIENTMETRICS, sizeof(NONCLIENTMETRICS), &ncm, 0))
-                ret = qMax(ncm.iScrollHeight, ncm.iScrollWidth);
-            else
-#endif // !Q_OS_WINCE && !Q_OS_WINRT
-                ret = QCommonStyle::pixelMetric(pm, opt, widget);
-        }
-        break;
-#endif // Q_OS_WIN
-
     case PM_SplitterWidth:
-        ret = qMax(4, QApplication::globalStrut().width());
+        ret = qMax(int(QStyleHelper::dpiScaled(4)), QApplication::globalStrut().width());
         break;
 
-#if defined(Q_OS_WIN)
-#ifndef Q_OS_WINRT // Mdi concept not available for WinRT applications
-    case PM_MdiSubWindowFrameWidth:
-#if defined(Q_OS_WINCE)
-        ret = GetSystemMetrics(SM_CYDLGFRAME);
-#else
-        ret = GetSystemMetrics(SM_CYFRAME);
-#endif
-        break;
-#endif // !Q_OS_WINRT
-#endif // Q_OS_WIN
-    case PM_ToolBarItemMargin:
-        ret = 1;
-        break;
-    case PM_ToolBarItemSpacing:
-        ret = 0;
-        break;
-    case PM_ToolBarHandleExtent:
-        ret = int(QStyleHelper::dpiScaled(10.));
-        break;
     default:
         ret = QCommonStyle::pixelMetric(pm, opt, widget);
         break;
@@ -909,7 +900,7 @@ void QWindowsStyle::drawPrimitive(PrimitiveElement pe, const QStyleOption *opt,
             int xOffset = 0;
             int yOffset = 0;
             int indicatorWidth = proxy()->pixelMetric(PM_ExclusiveIndicatorWidth);
-            int indicatorHeight = proxy()->pixelMetric(PM_ExclusiveIndicatorWidth);
+            int indicatorHeight = proxy()->pixelMetric(PM_ExclusiveIndicatorHeight);
             if (ir.width() > indicatorWidth)
                 xOffset += (ir.width() - indicatorWidth)/2;
             if (ir.height() > indicatorHeight)
@@ -1154,8 +1145,8 @@ void QWindowsStyle::drawControl(ControlElement ce, const QStyleOption *opt, QPai
                     pixmap = menuitem->icon.pixmap(proxy()->pixelMetric(PM_SmallIconSize, opt, widget), mode, QIcon::On);
                 else
                     pixmap = menuitem->icon.pixmap(proxy()->pixelMetric(PM_SmallIconSize, opt, widget), mode);
-                int pixw = pixmap.width();
-                int pixh = pixmap.height();
+                const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                const int pixh = pixmap.height() / pixmap.devicePixelRatio();
                 if (act && !dis && !checked)
                     qDrawShadePanel(p, vCheckRect,  menuitem->palette, false, 1,
                                     &menuitem->palette.brush(QPalette::Button));
diff --git a/src/widgets/styles/qwindowsstyle_p.h b/src/widgets/styles/qwindowsstyle_p.h
index 39b85ec148..b3c6f831d8 100644
--- a/src/widgets/styles/qwindowsstyle_p.h
+++ b/src/widgets/styles/qwindowsstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsstyle_p_p.h b/src/widgets/styles/qwindowsstyle_p_p.h
index 872b6f0e9e..1e6a3e67ee 100644
--- a/src/widgets/styles/qwindowsstyle_p_p.h
+++ b/src/widgets/styles/qwindowsstyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,7 +60,14 @@ class QWindowsStylePrivate : public QCommonStylePrivate
 {
     Q_DECLARE_PUBLIC(QWindowsStyle)
 public:
+    enum { InvalidMetric = -23576 };
+
     QWindowsStylePrivate();
+    static int pixelMetricFromSystemDp(QStyle::PixelMetric pm, const QStyleOption *option = 0, const QWidget *widget = 0);
+    static int fixedPixelMetric(QStyle::PixelMetric pm);
+    static int devicePixelRatio(const QWidget *widget = 0)
+        { return widget ? widget->devicePixelRatio() : QWindowsStylePrivate::appDevicePixelRatio(); }
+
     bool hasSeenAlt(const QWidget *widget) const;
     bool altDown() const { return alt_down; }
     bool alt_down;
@@ -90,6 +89,10 @@ public:
         windowsRightBorder      = 15, // right border on windows
         windowsCheckMarkWidth   = 12  // checkmarks width on windows
     };
+
+private:
+    static int appDevicePixelRatio();
+    static int m_appDevicePixelRatio;
 };
 
 QT_END_NAMESPACE
diff --git a/src/widgets/styles/qwindowsvistastyle.cpp b/src/widgets/styles/qwindowsvistastyle.cpp
index bc78ea3296..a6eb2c0bc6 100644
--- a/src/widgets/styles/qwindowsvistastyle.cpp
+++ b/src/widgets/styles/qwindowsvistastyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -82,66 +74,16 @@ static const int windowsRightBorder      = 15; // right border on windows
 #  define CMDLGS_DISABLED 4
 #endif
 
-// Runtime resolved theme engine function calls
-
-
-typedef HRESULT (WINAPI *PtrGetThemePartSize)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, OPTIONAL RECT *prc, enum THEMESIZE eSize, OUT SIZE *psz);
-typedef HTHEME (WINAPI *PtrOpenThemeData)(HWND hwnd, LPCWSTR pszClassList);
-typedef HTHEME (WINAPI *PtrOpenThemeData)(HWND hwnd, LPCWSTR pszClassList);
-typedef HRESULT (WINAPI *PtrCloseThemeData)(HTHEME hTheme);
-typedef HRESULT (WINAPI *PtrDrawThemeBackground)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, const RECT *pRect, OPTIONAL const RECT *pClipRect);
-typedef HRESULT (WINAPI *PtrDrawThemeBackgroundEx)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, const RECT *pRect, OPTIONAL const DTBGOPTS *pOptions);
-typedef HRESULT (WINAPI *PtrGetCurrentThemeName)(OUT LPWSTR pszThemeFileName, int cchMaxNameChars, OUT OPTIONAL LPWSTR pszColorBuff, int cchMaxColorChars, OUT OPTIONAL LPWSTR pszSizeBuff, int cchMaxSizeChars);
-typedef HRESULT (WINAPI *PtrGetThemeBool)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT BOOL *pfVal);
-typedef HRESULT (WINAPI *PtrGetThemeColor)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT COLORREF *pColor);
-typedef HRESULT (WINAPI *PtrGetThemeEnumValue)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT int *piVal);
-typedef HRESULT (WINAPI *PtrGetThemeFilename)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT LPWSTR pszThemeFileName, int cchMaxBuffChars);
-typedef HRESULT (WINAPI *PtrGetThemeFont)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OUT LOGFONT *pFont);
-typedef HRESULT (WINAPI *PtrGetThemeInt)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT int *piVal);
-typedef HRESULT (WINAPI *PtrGetThemeIntList)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT INTLIST *pIntList);
-typedef HRESULT (WINAPI *PtrGetThemeMargins)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OPTIONAL RECT *prc, OUT MARGINS *pMargins);
-typedef HRESULT (WINAPI *PtrGetThemeMetric)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OUT int *piVal);
-typedef HRESULT (WINAPI *PtrGetThemePartSize)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, OPTIONAL RECT *prc, enum THEMESIZE eSize, OUT SIZE *psz);
-typedef HRESULT (WINAPI *PtrGetThemePosition)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT POINT *pPoint);
-typedef HRESULT (WINAPI *PtrGetThemeRect)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT RECT *pRect);
-typedef HRESULT (WINAPI *PtrGetThemeString)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT LPWSTR pszBuff, int cchMaxBuffChars);
-typedef HRESULT (WINAPI *PtrGetThemeTransitionDuration)(HTHEME hTheme, int iPartId, int iStateFromId, int iStateToId, int iPropId, int *pDuration);
-typedef HRESULT (WINAPI *PtrIsThemePartDefined)(HTHEME hTheme, int iPartId, int iStateId);
-typedef HRESULT (WINAPI *PtrSetWindowTheme)(HWND hwnd, LPCWSTR pszSubAppName, LPCWSTR pszSubIdList);
-typedef HRESULT (WINAPI *PtrGetThemePropertyOrigin)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT enum PROPERTYORIGIN *pOrigin);
-
-static PtrIsThemePartDefined pIsThemePartDefined = 0;
-static PtrOpenThemeData pOpenThemeData = 0;
-static PtrCloseThemeData pCloseThemeData = 0;
-static PtrDrawThemeBackground pDrawThemeBackground = 0;
-static PtrDrawThemeBackgroundEx pDrawThemeBackgroundEx = 0;
-static PtrGetCurrentThemeName pGetCurrentThemeName = 0;
-static PtrGetThemeBool pGetThemeBool = 0;
-static PtrGetThemeColor pGetThemeColor = 0;
-static PtrGetThemeEnumValue pGetThemeEnumValue = 0;
-static PtrGetThemeFilename pGetThemeFilename = 0;
-static PtrGetThemeFont pGetThemeFont = 0;
-static PtrGetThemeInt pGetThemeInt = 0;
-static PtrGetThemeIntList pGetThemeIntList = 0;
-static PtrGetThemeMargins pGetThemeMargins = 0;
-static PtrGetThemeMetric pGetThemeMetric = 0;
-static PtrGetThemePartSize pGetThemePartSize = 0;
-static PtrGetThemePosition pGetThemePosition = 0;
-static PtrGetThemeRect pGetThemeRect = 0;
-static PtrGetThemeString pGetThemeString = 0;
-static PtrGetThemeTransitionDuration pGetThemeTransitionDuration= 0;
-static PtrSetWindowTheme pSetWindowTheme = 0;
-static PtrGetThemePropertyOrigin pGetThemePropertyOrigin = 0;
-
 /* \internal
     Checks if we should use Vista style , or if we should
     fall back to Windows style.
 */
 bool QWindowsVistaStylePrivate::useVista()
 {
-    return (QWindowsVistaStylePrivate::useXP() &&
-            (QSysInfo::WindowsVersion >= QSysInfo::WV_VISTA &&
-             (QSysInfo::WindowsVersion & QSysInfo::WV_NT_based)));
+    return (QSysInfo::WindowsVersion >= QSysInfo::WV_VISTA
+            && (QSysInfo::WindowsVersion & QSysInfo::WV_NT_based))
+           && QWindowsVistaStylePrivate::useXP()
+           && QWindowsVistaStylePrivate::pGetThemeTransitionDuration != Q_NULLPTR;
 }
 
 /* \internal
@@ -392,7 +334,7 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
 
                     //translate state flags to UXTHEME states :
                     if (element == PE_FrameLineEdit) {
-                        theme = pOpenThemeData(0, L"Edit");
+                        theme = QWindowsXPStylePrivate::pOpenThemeData(0, L"Edit");
                         partId = EP_EDITBORDER_NOSCROLL;
 
                         if (oldState & State_MouseOver)
@@ -410,7 +352,7 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
                             toState = ETS_NORMAL;
 
                     } else {
-                        theme = pOpenThemeData(0, L"Button");
+                        theme = QWindowsXPStylePrivate::pOpenThemeData(0, L"Button");
                         if (element == PE_IndicatorRadioButton)
                             partId = BP_RADIOBUTTON;
                         else if (element == PE_IndicatorCheckBox)
@@ -423,7 +365,7 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
                     }
 
                     // Retrieve the transition time between the states from the system.
-                    if (theme && pGetThemeTransitionDuration(theme, partId, fromState, toState,
+                    if (theme && QWindowsXPStylePrivate::pGetThemeTransitionDuration(theme, partId, fromState, toState,
                                                              TMT_TRANSITIONDURATIONS, &duration) == S_OK)
                     {
                         t->setDuration(duration);
@@ -459,9 +401,11 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
             XPThemeData theme(0, painter, QWindowsXPStylePrivate::TreeViewTheme);
             static int decoration_size = 0;
             if (d->initTreeViewTheming() && theme.isValid() && !decoration_size) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, TVP_HOTGLYPH, GLPS_OPENED, 0, TS_TRUE, &size);
-                decoration_size = qMax(size.cx, size.cy);
+                XPThemeData themeSize = theme;
+                themeSize.partId = TVP_HOTGLYPH;
+                themeSize.stateId = GLPS_OPENED;
+                const QSize size = themeSize.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                decoration_size = qMax(size.width(), size.height());
             }
             int mid_h = option->rect.x() + option->rect.width() / 2;
             int mid_v = option->rect.y() + option->rect.height() / 2;
@@ -541,7 +485,7 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
                               EP_EDITBORDER_HVSCROLL, stateId, option->rect);
             // Since EP_EDITBORDER_HVSCROLL does not us borderfill, theme.noContent cannot be used for clipping
             int borderSize = 1;
-            pGetThemeInt(theme.handle(), theme.partId, theme.stateId, TMT_BORDERSIZE, &borderSize);
+            QWindowsXPStylePrivate::pGetThemeInt(theme.handle(), theme.partId, theme.stateId, TMT_BORDERSIZE, &borderSize);
             QRegion clipRegion = option->rect;
             QRegion content = option->rect.adjusted(borderSize, borderSize, -borderSize, -borderSize);
             clipRegion ^= content;
@@ -593,7 +537,7 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
                     return;
                 }
                 int bgType;
-                pGetThemeEnumValue( theme.handle(),
+                QWindowsXPStylePrivate::pGetThemeEnumValue( theme.handle(),
                                     partId,
                                     stateId,
                                     TMT_BGTYPE,
@@ -604,11 +548,11 @@ void QWindowsVistaStyle::drawPrimitive(PrimitiveElement element, const QStyleOpt
                     QBrush fillColor = option->palette.brush(QPalette::Base);
                     if (!isEnabled) {
                         PROPERTYORIGIN origin = PO_NOTFOUND;
-                        pGetThemePropertyOrigin(theme.handle(), theme.partId, theme.stateId, TMT_FILLCOLOR, &origin);
+                        QWindowsXPStylePrivate::pGetThemePropertyOrigin(theme.handle(), theme.partId, theme.stateId, TMT_FILLCOLOR, &origin);
                         // Use only if the fill property comes from our part
                         if ((origin == PO_PART || origin == PO_STATE)) {
                             COLORREF bgRef;
-                            pGetThemeColor(theme.handle(), partId, stateId, TMT_FILLCOLOR, &bgRef);
+                            QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), partId, stateId, TMT_FILLCOLOR, &bgRef);
                             fillColor = QBrush(qRgb(GetRValue(bgRef), GetGValue(bgRef), GetBValue(bgRef)));
                         }
                     }
@@ -944,11 +888,11 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
 
 
                 int duration = 0;
-                HTHEME theme = pOpenThemeData(0, L"Button");
+                HTHEME theme = QWindowsXPStylePrivate::pOpenThemeData(0, L"Button");
 
                 int fromState = buttonStateId(oldState, BP_PUSHBUTTON);
                 int toState = buttonStateId(option->state, BP_PUSHBUTTON);
-                if (pGetThemeTransitionDuration(theme, BP_PUSHBUTTON, fromState, toState, TMT_TRANSITIONDURATIONS, &duration) == S_OK)
+                if (QWindowsXPStylePrivate::pGetThemeTransitionDuration(theme, BP_PUSHBUTTON, fromState, toState, TMT_TRANSITIONDURATIONS, &duration) == S_OK)
                     t->setDuration(duration);
                 else
                     t->setDuration(0);
@@ -1040,10 +984,10 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
                 XPThemeData theme(widget, 0, QWindowsXPStylePrivate::ToolBarTheme,
                                   TP_DROPDOWNBUTTON);
                 if (theme.isValid()) {
-                    SIZE size;
-                    if (pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size) == S_OK) {
-                        mbiw = size.cx;
-                        mbih = size.cy;
+                    const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                    if (!size.isEmpty()) {
+                        mbiw = size.width();
+                        mbih = size.height();
                     }
                 }
                 QRect ir = subElementRect(SE_PushButtonContents, option, 0);
@@ -1231,15 +1175,17 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
     case CE_MenuItem:
         if (const QStyleOptionMenuItem *menuitem = qstyleoption_cast<const QStyleOptionMenuItem *>(option)) {
             // windows always has a check column, regardless whether we have an icon or not
-            int checkcol = 25;
+            int checkcol = 25 / QWindowsXPStylePrivate::devicePixelRatio(widget);
+            const int gutterWidth = 3 / QWindowsXPStylePrivate::devicePixelRatio(widget);
             {
-                SIZE    size;
-                MARGINS margins;
                 XPThemeData theme(widget, 0, QWindowsXPStylePrivate::MenuTheme,
                                   MENU_POPUPCHECKBACKGROUND, MBI_HOT);
-                pGetThemePartSize(theme.handle(), NULL, MENU_POPUPCHECK, 0, NULL,TS_TRUE, &size);
-                pGetThemeMargins(theme.handle(), NULL, MENU_POPUPCHECK, 0, TMT_CONTENTMARGINS, NULL, &margins);
-                checkcol = qMax(menuitem->maxIconWidth, int(3 + size.cx + margins.cxLeftWidth + margins.cxRightWidth));
+                XPThemeData themeSize = theme;
+                themeSize.partId = MENU_POPUPCHECK;
+                themeSize.stateId = 0;
+                const QSize size = themeSize.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                const QMargins margins = themeSize.margins() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                checkcol = qMax(menuitem->maxIconWidth, gutterWidth + size.width() + margins.left() + margins.right());
             }
             QRect rect = option->rect;
 
@@ -1248,7 +1194,7 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
                 checkcol += rect.x();
             QPoint p1 = QStyle::visualPos(option->direction, menuitem->rect, QPoint(checkcol, rect.top()));
             QPoint p2 = QStyle::visualPos(option->direction, menuitem->rect, QPoint(checkcol, rect.bottom()));
-            QRect gutterRect(p1.x(), p1.y(), 3, p2.y() - p1.y() + 1);
+            QRect gutterRect(p1.x(), p1.y(), gutterWidth, p2.y() - p1.y() + 1);
             XPThemeData theme2(widget, painter, QWindowsXPStylePrivate::MenuTheme,
                                MENU_POPUPGUTTER, stateId, gutterRect);
             d->drawBackground(theme2);
@@ -1263,10 +1209,12 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
 
             if (menuitem->menuItemType == QStyleOptionMenuItem::Separator) {
                 int yoff = y-2 + h / 2;
+                const int separatorSize = 6 / QWindowsXPStylePrivate::devicePixelRatio(widget);
                 QPoint p1 = QPoint(x + checkcol, yoff);
-                QPoint p2 = QPoint(x + w + 6 , yoff);
+                QPoint p2 = QPoint(x + w + separatorSize, yoff);
                 stateId = MBI_HOT;
-                QRect subRect(p1.x() + (3 - menuitem->rect.x()), p1.y(), p2.x() - p1.x(), 6);
+                QRect subRect(p1.x() + (gutterWidth - menuitem->rect.x()), p1.y(),
+                              p2.x() - p1.x(), separatorSize);
                 subRect  = QStyle::visualRect(option->direction, option->rect, subRect );
                 XPThemeData theme2(widget, painter,
                                    QWindowsXPStylePrivate::MenuTheme,
@@ -1276,7 +1224,7 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
             }
 
             QRect vCheckRect = visualRect(option->direction, menuitem->rect, QRect(menuitem->rect.x(),
-                                          menuitem->rect.y(), checkcol - (3 + menuitem->rect.x()), menuitem->rect.height()));
+                                          menuitem->rect.y(), checkcol - (gutterWidth + menuitem->rect.x()), menuitem->rect.height()));
 
             if (act) {
                 stateId = dis ? MBI_DISABLED : MBI_HOT;
@@ -1291,20 +1239,20 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
                                   QWindowsXPStylePrivate::MenuTheme,
                                   MENU_POPUPCHECKBACKGROUND,
                                   menuitem->icon.isNull() ? MBI_HOT : MBI_PUSHED, vCheckRect);
-                SIZE    size;
-                MARGINS margins;
-                pGetThemePartSize(theme.handle(), NULL, MENU_POPUPCHECK, 0, NULL,TS_TRUE, &size);
-                pGetThemeMargins(theme.handle(), NULL, MENU_POPUPCHECK, 0,
-                                TMT_CONTENTMARGINS, NULL, &margins);
-                QRect checkRect(0, 0, size.cx + margins.cxLeftWidth + margins.cxRightWidth ,
-                                size.cy + margins.cyBottomHeight + margins.cyTopHeight);
+                XPThemeData themeSize = theme;
+                themeSize.partId = MENU_POPUPCHECK;
+                themeSize.stateId = 0;
+                const QSize size = themeSize.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                const QMargins margins = themeSize.margins() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                QRect checkRect(0, 0, size.width() + margins.left() + margins.right(),
+                                size.height() + margins.bottom() + margins.top());
                 checkRect.moveCenter(vCheckRect.center());
                 theme.rect = checkRect;
 
                 d->drawBackground(theme);
 
                 if (menuitem->icon.isNull()) {
-                    checkRect = QRect(0, 0, size.cx, size.cy);
+                    checkRect = QRect(QPoint(0, 0), size);
                     checkRect.moveCenter(theme.rect.center());
                     theme.rect = checkRect;
 
@@ -1327,8 +1275,8 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
                     pixmap = menuitem->icon.pixmap(proxy()->pixelMetric(PM_SmallIconSize, option, widget), mode, QIcon::On);
                 else
                     pixmap = menuitem->icon.pixmap(proxy()->pixelMetric(PM_SmallIconSize, option, widget), mode);
-                int pixw = pixmap.width();
-                int pixh = pixmap.height();
+                const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                const int pixh = pixmap.height() / pixmap.devicePixelRatio();
                 QRect pmr(0, 0, pixw, pixh);
                 pmr.moveCenter(vCheckRect.center());
                 painter->setPen(menuitem->palette.text().color());
@@ -1341,7 +1289,7 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
             if (dis)
                 painter->setPen(textColor);
 
-            int xm = windowsItemFrame + checkcol + windowsItemHMargin + (3 - menuitem->rect.x()) - 1;
+            int xm = windowsItemFrame + checkcol + windowsItemHMargin + (gutterWidth - menuitem->rect.x()) - 1;
             int xpos = menuitem->rect.x() + xm;
             QRect textRect(xpos, y + windowsItemVMargin, w - xm - windowsRightBorder - tab + 1, h - 2 * windowsItemVMargin);
             QRect vTextRect = visualRect(option->direction, menuitem->rect, textRect);
@@ -1421,15 +1369,14 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
         }
         break;
     case CE_DockWidgetTitle:
-        if (const QDockWidget *dockWidget = qobject_cast<const QDockWidget *>(widget)) {
+        if (const QStyleOptionDockWidget *dwOpt = qstyleoption_cast<const QStyleOptionDockWidget *>(option)) {
+            const QDockWidget *dockWidget = qobject_cast<const QDockWidget *>(widget);
             QRect rect = option->rect;
-            if (dockWidget->isFloating()) {
+            if (dockWidget && dockWidget->isFloating()) {
                 QWindowsXPStyle::drawControl(element, option, painter, widget);
                 break; //otherwise fall through
             }
 
-            if (const QStyleOptionDockWidget *dwOpt = qstyleoption_cast<const QStyleOptionDockWidget *>(option)) {
-
             const QStyleOptionDockWidgetV2 *v2
                 = qstyleoption_cast<const QStyleOptionDockWidgetV2*>(dwOpt);
             bool verticalTitleBar = v2 == 0 ? false : v2->verticalTitleBar;
@@ -1458,12 +1405,12 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
             QRect titleRect = r;
 
             if (dwOpt->closable) {
-                QSize sz = standardIcon(QStyle::SP_TitleBarCloseButton, dwOpt, widget).actualSize(QSize(10, 10));
+                QSize sz = proxy()->standardIcon(QStyle::SP_TitleBarCloseButton, dwOpt, widget).actualSize(QSize(10, 10));
                 titleRect.adjust(0, 0, -sz.width() - mw - buttonMargin, 0);
             }
 
             if (dwOpt->floatable) {
-                QSize sz = standardIcon(QStyle::SP_TitleBarMaxButton, dwOpt, widget).actualSize(QSize(10, 10));
+                QSize sz = proxy()->standardIcon(QStyle::SP_TitleBarMaxButton, dwOpt, widget).actualSize(QSize(10, 10));
                 titleRect.adjust(0, 0, -sz.width() - mw - buttonMargin, 0);
             }
 
@@ -1490,7 +1437,6 @@ void QWindowsVistaStyle::drawControl(ControlElement element, const QStyleOption
                 }
             }
             break;
-        }
 #ifndef QT_NO_ITEMVIEWS
     case CE_ItemViewItem:
         {
@@ -1806,7 +1752,6 @@ void QWindowsVistaStyle::drawComplexControl(ComplexControl control, const QStyle
                         stateId = SCRBS_NORMAL;
 
                     // Draw handle
-                    theme.rect = proxy()->subControlRect(CC_ScrollBar, option, SC_ScrollBarSlider, widget);
                     theme.partId = flags & State_Horizontal ? SBP_THUMBBTNHORZ : SBP_THUMBBTNVERT;
                     theme.stateId = stateId;
                     d->drawBackground(theme);
@@ -1815,29 +1760,21 @@ void QWindowsVistaStyle::drawComplexControl(ComplexControl control, const QStyle
                     const int swidth = theme.rect.width();
                     const int sheight = theme.rect.height();
 
-                    MARGINS contentsMargin;
-                    RECT rect = theme.toRECT(theme.rect);
-                    pGetThemeMargins(theme.handle(), 0, theme.partId, theme.stateId, TMT_SIZINGMARGINS, &rect, &contentsMargin);
+                    const QMargins contentsMargin = theme.margins(theme.rect, TMT_SIZINGMARGINS)
+                                                    / QWindowsXPStylePrivate::devicePixelRatio(widget);
 
-                    SIZE size;
                     theme.partId = flags & State_Horizontal ? SBP_GRIPPERHORZ : SBP_GRIPPERVERT;
-                    pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                    int gw = size.cx, gh = size.cy;
-
+                    const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
 
                     if (QSysInfo::WindowsVersion < QSysInfo::WV_WINDOWS8) {
-                        QRect gripperBounds;
-                        if (flags & State_Horizontal && ((swidth - contentsMargin.cxLeftWidth - contentsMargin.cxRightWidth) > gw)) {
-                            gripperBounds.setLeft(theme.rect.left() + swidth/2 - gw/2);
-                            gripperBounds.setTop(theme.rect.top() + sheight/2 - gh/2);
-                            gripperBounds.setWidth(gw);
-                            gripperBounds.setHeight(gh);
-                        } else if ((sheight - contentsMargin.cyTopHeight - contentsMargin.cyBottomHeight) > gh) {
-                            gripperBounds.setLeft(theme.rect.left() + swidth/2 - gw/2);
-                            gripperBounds.setTop(theme.rect.top() + sheight/2 - gh/2);
-                            gripperBounds.setWidth(gw);
-                            gripperBounds.setHeight(gh);
+                        QPoint gripperBoundsPos(0, 0);
+                        if ((flags & State_Horizontal
+                             && swidth - contentsMargin.left() - contentsMargin.right() > size.width())
+                            || sheight - contentsMargin.top() - contentsMargin.bottom() > size.height()) {
+                            gripperBoundsPos = QPoint(theme.rect.left() + (swidth - size.width()) / 2,
+                                                      theme.rect.top() + (sheight - size.height()) / 2);
                         }
+                        const QRect gripperBounds(gripperBoundsPos, size);
 
                         // Draw gripper if there is enough space
                         if (!gripperBounds.isEmpty() && flags & State_Enabled) {
@@ -1935,15 +1872,16 @@ QSize QWindowsVistaStyle::sizeFromContents(ContentsType type, const QStyleOption
         sz = QWindowsXPStyle::sizeFromContents(type, option, size, widget);
         int minimumHeight;
         {
-            SIZE    size;
-            MARGINS margins;
             XPThemeData theme(widget, 0,
                               QWindowsXPStylePrivate::MenuTheme,
                               MENU_POPUPCHECKBACKGROUND, MBI_HOT);
-            pGetThemePartSize(theme.handle(), NULL, MENU_POPUPCHECK, 0, NULL,TS_TRUE, &size);
-            pGetThemeMargins(theme.handle(), NULL, MENU_POPUPCHECK, 0, TMT_CONTENTMARGINS, NULL, &margins);
-            minimumHeight = qMax<qint32>(size.cy + margins.cyBottomHeight+ margins.cyTopHeight, sz.height());
-            sz.rwidth() += size.cx + margins.cxLeftWidth + margins.cxRightWidth;
+            XPThemeData themeSize = theme;
+            themeSize.partId = MENU_POPUPCHECK;
+            themeSize.stateId = 0;
+            const QSize size = themeSize.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+            const QMargins margins = themeSize.margins() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+            minimumHeight = qMax(size.height() + margins.bottom() + margins.top(), sz.height());
+            sz.rwidth() += size.width() + margins.left() + margins.right();
         }
 
         if (const QStyleOptionMenuItem *menuitem = qstyleoption_cast<const QStyleOptionMenuItem *>(option)) {
@@ -2003,7 +1941,7 @@ QRect QWindowsVistaStyle::subElementRect(SubElement element, const QStyleOption
     case SE_PushButtonContents:
         if (const QStyleOptionButton *btn = qstyleoption_cast<const QStyleOptionButton *>(option)) {
             MARGINS borderSize;
-            HTHEME theme = pOpenThemeData(widget ? QWindowsVistaStylePrivate::winId(widget) : 0, L"Button");
+            HTHEME theme = QWindowsXPStylePrivate::pOpenThemeData(widget ? QWindowsVistaStylePrivate::winId(widget) : 0, L"Button");
             if (theme) {
                 int stateId = PBS_NORMAL;
                 if (!(option->state & State_Enabled))
@@ -2018,7 +1956,7 @@ QRect QWindowsVistaStyle::subElementRect(SubElement element, const QStyleOption
                 int border = proxy()->pixelMetric(PM_DefaultFrameWidth, btn, widget);
                 rect = option->rect.adjusted(border, border, -border, -border);
 
-                int result = pGetThemeMargins(theme,
+                int result = QWindowsXPStylePrivate::pGetThemeMargins(theme,
                                               NULL,
                                               BP_PUSHBUTTON,
                                               stateId,
@@ -2051,10 +1989,10 @@ QRect QWindowsVistaStyle::subElementRect(SubElement element, const QStyleOption
             int arrowWidth = 13;
             int arrowHeight = 5;
             if (theme.isValid()) {
-                SIZE size;
-                if (pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size) == S_OK) {
-                    arrowWidth = size.cx;
-                    arrowHeight = size.cy;
+                const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                if (!size.isEmpty()) {
+                    arrowWidth = size.width();
+                    arrowHeight = size.height();
                 }
             }
             if (option->state & State_Horizontal) {
@@ -2247,7 +2185,8 @@ QRect QWindowsVistaStyle::subControlRect(ComplexControl control, const QStyleOpt
             const bool isToolTitle = false;
             const int height = tb->rect.height();
             const int width = tb->rect.width();
-            int buttonWidth = GetSystemMetrics(SM_CXSIZE) - 4;
+            int buttonWidth = GetSystemMetrics(SM_CXSIZE) / QWindowsStylePrivate::devicePixelRatio(widget)
+                - int(QStyleHelper::dpiScaled(4));
 
             const int frameWidth = proxy()->pixelMetric(PM_MdiSubWindowFrameWidth, option, widget);
             const bool sysmenuHint  = (tb->titleBarFlags & Qt::WindowSystemMenuHint) != 0;
@@ -2320,28 +2259,36 @@ QStyle::SubControl QWindowsVistaStyle::hitTestComplexControl(ComplexControl cont
     return QWindowsXPStyle::hitTestComplexControl(control, option, pos, widget);
 }
 
-/*!
- \internal
- */
-int QWindowsVistaStyle::pixelMetric(PixelMetric metric, const QStyleOption *option, const QWidget *widget) const
+int QWindowsVistaStylePrivate::fixedPixelMetric(QStyle::PixelMetric pm)
 {
-    if (!QWindowsVistaStylePrivate::useVista()) {
-        return QWindowsStyle::pixelMetric(metric, option, widget);
-    }
-    switch (metric) {
-
-    case PM_DockWidgetTitleBarButtonMargin:
-        return int(QStyleHelper::dpiScaled(5.));
-    case PM_ScrollBarSliderMin:
-        return int(QStyleHelper::dpiScaled(18.));
-    case PM_MenuHMargin:
-    case PM_MenuVMargin:
+    switch (pm) {
+    case QStyle::PM_DockWidgetTitleBarButtonMargin:
+        return 5;
+    case QStyle::PM_ScrollBarSliderMin:
+        return 18;
+    case QStyle::PM_MenuHMargin:
+    case QStyle::PM_MenuVMargin:
         return 0;
-    case PM_MenuPanelWidth:
+    case QStyle::PM_MenuPanelWidth:
         return 3;
     default:
         break;
     }
+    return QWindowsVistaStylePrivate::InvalidMetric;
+}
+
+/*!
+ \internal
+ */
+int QWindowsVistaStyle::pixelMetric(PixelMetric metric, const QStyleOption *option, const QWidget *widget) const
+{
+    if (!QWindowsVistaStylePrivate::useVista())
+        return QWindowsStyle::pixelMetric(metric, option, widget);
+
+    int ret = QWindowsStylePrivate::fixedPixelMetric(metric);
+    if (ret != QWindowsStylePrivate::InvalidMetric)
+        return int(QStyleHelper::dpiScaled(ret));
+
     return QWindowsXPStyle::pixelMetric(metric, option, widget);
 }
 
@@ -2384,9 +2331,9 @@ void QWindowsVistaStyle::polish(QWidget *widget)
         //we do not have to care about unpolishing
         widget->setContentsMargins(3, 0, 4, 0);
         COLORREF bgRef;
-        HTHEME theme = pOpenThemeData(widget ? QWindowsVistaStylePrivate::winId(widget) : 0, L"TOOLTIP");
+        HTHEME theme = QWindowsXPStylePrivate::pOpenThemeData(widget ? QWindowsVistaStylePrivate::winId(widget) : 0, L"TOOLTIP");
         if (theme) {
-            if (pGetThemeColor(theme, TTP_STANDARD, TTSS_NORMAL, TMT_TEXTCOLOR, &bgRef) == S_OK) {
+            if (QWindowsXPStylePrivate::pGetThemeColor(theme, TTP_STANDARD, TTSS_NORMAL, TMT_TEXTCOLOR, &bgRef) == S_OK) {
                 QColor textColor = QColor::fromRgb(bgRef);
                 QPalette pal;
                 pal.setColor(QPalette::All, QPalette::ToolTipText, textColor);
@@ -2494,7 +2441,6 @@ QPixmap QWindowsVistaStyle::standardPixmap(StandardPixmap standardPixmap, const
 QWindowsVistaStylePrivate::QWindowsVistaStylePrivate() :
     QWindowsXPStylePrivate(), m_treeViewHelper(0)
 {
-    resolveSymbols();
 }
 
 QWindowsVistaStylePrivate::~QWindowsVistaStylePrivate()
@@ -2513,43 +2459,6 @@ bool QWindowsVistaStylePrivate::transitionsEnabled() const
     return false;
 }
 
-/*! \internal
-    Returns \c true if all the necessary theme engine symbols were
-    resolved.
-*/
-bool QWindowsVistaStylePrivate::resolveSymbols()
-{
-    static bool tried = false;
-    if (!tried) {
-        tried = true;
-        QSystemLibrary themeLib(QLatin1String("uxtheme"));
-        pSetWindowTheme         = (PtrSetWindowTheme        )themeLib.resolve("SetWindowTheme");
-        pIsThemePartDefined     = (PtrIsThemePartDefined    )themeLib.resolve("IsThemePartDefined");
-        pGetThemePartSize       = (PtrGetThemePartSize      )themeLib.resolve("GetThemePartSize");
-        pOpenThemeData          = (PtrOpenThemeData         )themeLib.resolve("OpenThemeData");
-        pCloseThemeData         = (PtrCloseThemeData        )themeLib.resolve("CloseThemeData");
-        pDrawThemeBackground    = (PtrDrawThemeBackground   )themeLib.resolve("DrawThemeBackground");
-        pDrawThemeBackgroundEx  = (PtrDrawThemeBackgroundEx )themeLib.resolve("DrawThemeBackgroundEx");
-        pGetCurrentThemeName    = (PtrGetCurrentThemeName   )themeLib.resolve("GetCurrentThemeName");
-        pGetThemeBool           = (PtrGetThemeBool          )themeLib.resolve("GetThemeBool");
-        pGetThemeColor          = (PtrGetThemeColor         )themeLib.resolve("GetThemeColor");
-        pGetThemeEnumValue      = (PtrGetThemeEnumValue     )themeLib.resolve("GetThemeEnumValue");
-        pGetThemeFilename       = (PtrGetThemeFilename      )themeLib.resolve("GetThemeFilename");
-        pGetThemeFont           = (PtrGetThemeFont          )themeLib.resolve("GetThemeFont");
-        pGetThemeInt            = (PtrGetThemeInt           )themeLib.resolve("GetThemeInt");
-        pGetThemeIntList        = (PtrGetThemeIntList       )themeLib.resolve("GetThemeIntList");
-        pGetThemeMargins        = (PtrGetThemeMargins       )themeLib.resolve("GetThemeMargins");
-        pGetThemeMetric         = (PtrGetThemeMetric        )themeLib.resolve("GetThemeMetric");
-        pGetThemePartSize       = (PtrGetThemePartSize      )themeLib.resolve("GetThemePartSize");
-        pGetThemePosition       = (PtrGetThemePosition      )themeLib.resolve("GetThemePosition");
-        pGetThemeRect           = (PtrGetThemeRect          )themeLib.resolve("GetThemeRect");
-        pGetThemeString         = (PtrGetThemeString        )themeLib.resolve("GetThemeString");
-        pGetThemeTransitionDuration = (PtrGetThemeTransitionDuration)themeLib.resolve("GetThemeTransitionDuration");
-        pGetThemePropertyOrigin = (PtrGetThemePropertyOrigin)themeLib.resolve("GetThemePropertyOrigin");
-    }
-    return pGetThemeTransitionDuration != 0;
-}
-
 /*
  * We need to set the windows "explorer" theme explicitly on a native
  * window and open the "TREEVIEW" theme handle passing its window handle
@@ -2586,7 +2495,7 @@ bool QWindowsVistaStylePrivate::initTreeViewTheming()
         qWarning("%s: Unable to create the treeview helper window.", Q_FUNC_INFO);
         return false;
     }
-    const HRESULT hr = pSetWindowTheme(m_treeViewHelper, L"explorer", NULL);
+    const HRESULT hr = QWindowsXPStylePrivate::pSetWindowTheme(m_treeViewHelper, L"explorer", NULL);
     if (hr != S_OK) {
         qErrnoWarning("%s: SetWindowTheme() failed.", Q_FUNC_INFO);
         return false;
@@ -2621,14 +2530,13 @@ QIcon QWindowsVistaStyle::standardIcon(StandardPixmap standardIcon,
                               QWindowsXPStylePrivate::ButtonTheme,
                               BP_COMMANDLINKGLYPH, CMDLGS_NORMAL);
             if (theme.isValid()) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
+                const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
                 QIcon linkGlyph;
-                QPixmap pm = QPixmap(size.cx, size.cy);
+                QPixmap pm(size);
                 pm.fill(Qt::transparent);
                 QPainter p(&pm);
                 theme.painter = &p;
-                theme.rect = QRect(0, 0, size.cx, size.cy);
+                theme.rect = QRect(QPoint(0, 0), size);
                 d->drawBackground(theme);
                 linkGlyph.addPixmap(pm, QIcon::Normal, QIcon::Off);    // Normal
                 pm.fill(Qt::transparent);
diff --git a/src/widgets/styles/qwindowsvistastyle_p.h b/src/widgets/styles/qwindowsvistastyle_p.h
index 1b3201c026..415bec13f0 100644
--- a/src/widgets/styles/qwindowsvistastyle_p.h
+++ b/src/widgets/styles/qwindowsvistastyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsvistastyle_p_p.h b/src/widgets/styles/qwindowsvistastyle_p_p.h
index f2f208fbb5..f2e14b1ff2 100644
--- a/src/widgets/styles/qwindowsvistastyle_p_p.h
+++ b/src/widgets/styles/qwindowsvistastyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -171,7 +163,7 @@ class QWindowsVistaStylePrivate :  public QWindowsXPStylePrivate
 public:
     QWindowsVistaStylePrivate();
     ~QWindowsVistaStylePrivate();
-    static bool resolveSymbols();
+    static int fixedPixelMetric(QStyle::PixelMetric pm);
     static inline bool useVista();
     bool transitionsEnabled() const;
 
diff --git a/src/widgets/styles/qwindowsxpstyle.cpp b/src/widgets/styles/qwindowsxpstyle.cpp
index e694eb4e7e..624023f627 100644
--- a/src/widgets/styles/qwindowsxpstyle.cpp
+++ b/src/widgets/styles/qwindowsxpstyle.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,56 +69,76 @@
 QT_BEGIN_NAMESPACE
 
 // Runtime resolved theme engine function calls
-typedef bool (WINAPI *PtrIsAppThemed)();
-typedef bool (WINAPI *PtrIsThemeActive)();
-typedef HRESULT (WINAPI *PtrGetThemePartSize)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, OPTIONAL RECT *prc, enum THEMESIZE eSize, OUT SIZE *psz);
-typedef HTHEME (WINAPI *PtrOpenThemeData)(HWND hwnd, LPCWSTR pszClassList);
-typedef HRESULT (WINAPI *PtrCloseThemeData)(HTHEME hTheme);
-typedef HRESULT (WINAPI *PtrDrawThemeBackground)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, const RECT *pRect, OPTIONAL const RECT *pClipRect);
-typedef HRESULT (WINAPI *PtrDrawThemeBackgroundEx)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, const RECT *pRect, OPTIONAL const DTBGOPTS *pOptions);
-typedef HRESULT (WINAPI *PtrGetCurrentThemeName)(OUT LPWSTR pszThemeFileName, int cchMaxNameChars, OUT OPTIONAL LPWSTR pszColorBuff, int cchMaxColorChars, OUT OPTIONAL LPWSTR pszSizeBuff, int cchMaxSizeChars);
-typedef HRESULT (WINAPI *PtrGetThemeDocumentationProperty)(LPCWSTR pszThemeName, LPCWSTR pszPropertyName, OUT LPWSTR pszValueBuff, int cchMaxValChars);
-typedef HRESULT (WINAPI *PtrGetThemeBool)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT BOOL *pfVal);
-typedef HRESULT (WINAPI *PtrGetThemeColor)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT COLORREF *pColor);
-typedef HRESULT (WINAPI *PtrGetThemeEnumValue)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT int *piVal);
-typedef HRESULT (WINAPI *PtrGetThemeFilename)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT LPWSTR pszThemeFileName, int cchMaxBuffChars);
-typedef HRESULT (WINAPI *PtrGetThemeFont)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OUT LOGFONT *pFont);
-typedef HRESULT (WINAPI *PtrGetThemeInt)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT int *piVal);
-typedef HRESULT (WINAPI *PtrGetThemeIntList)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT INTLIST *pIntList);
-typedef HRESULT (WINAPI *PtrGetThemeMargins)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OPTIONAL RECT *prc, OUT MARGINS *pMargins);
-typedef HRESULT (WINAPI *PtrGetThemeMetric)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OUT int *piVal);
-typedef HRESULT (WINAPI *PtrGetThemePartSize)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, OPTIONAL RECT *prc, enum THEMESIZE eSize, OUT SIZE *psz);
-typedef HRESULT (WINAPI *PtrGetThemePosition)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT POINT *pPoint);
-typedef HRESULT (WINAPI *PtrGetThemePropertyOrigin)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT enum PROPERTYORIGIN *pOrigin);
-typedef HRESULT (WINAPI *PtrGetThemeRect)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT RECT *pRect);
-typedef HRESULT (WINAPI *PtrGetThemeString)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT LPWSTR pszBuff, int cchMaxBuffChars);
-typedef HRESULT (WINAPI *PtrGetThemeBackgroundRegion)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, const RECT *pRect, OUT HRGN *pRegion);
-typedef BOOL (WINAPI *PtrIsThemeBackgroundPartiallyTransparent)(HTHEME hTheme, int iPartId, int iStateId);
-
-static PtrIsAppThemed pIsAppThemed = 0;
-static PtrIsThemeActive pIsThemeActive = 0;
-static PtrOpenThemeData pOpenThemeData = 0;
-static PtrCloseThemeData pCloseThemeData = 0;
-static PtrDrawThemeBackground pDrawThemeBackground = 0;
-static PtrDrawThemeBackgroundEx pDrawThemeBackgroundEx = 0;
-static PtrGetCurrentThemeName pGetCurrentThemeName = 0;
-static PtrGetThemeBool pGetThemeBool = 0;
-static PtrGetThemeColor pGetThemeColor = 0;
-static PtrGetThemeEnumValue pGetThemeEnumValue = 0;
-static PtrGetThemeFilename pGetThemeFilename = 0;
-static PtrGetThemeFont pGetThemeFont = 0;
-static PtrGetThemeInt pGetThemeInt = 0;
-static PtrGetThemeIntList pGetThemeIntList = 0;
-static PtrGetThemeMargins pGetThemeMargins = 0;
-static PtrGetThemeMetric pGetThemeMetric = 0;
-static PtrGetThemePartSize pGetThemePartSize = 0;
-static PtrGetThemePosition pGetThemePosition = 0;
-static PtrGetThemePropertyOrigin pGetThemePropertyOrigin = 0;
-static PtrGetThemeRect pGetThemeRect = 0;
-static PtrGetThemeString pGetThemeString = 0;
-static PtrGetThemeBackgroundRegion pGetThemeBackgroundRegion = 0;
-static PtrGetThemeDocumentationProperty pGetThemeDocumentationProperty = 0;
-static PtrIsThemeBackgroundPartiallyTransparent pIsThemeBackgroundPartiallyTransparent = 0;
+
+QWindowsUxThemeLib::PtrIsAppThemed QWindowsUxThemeLib::pIsAppThemed = Q_NULLPTR;
+QWindowsUxThemeLib::PtrIsThemeActive QWindowsUxThemeLib::pIsThemeActive = Q_NULLPTR;
+QWindowsUxThemeLib::PtrOpenThemeData QWindowsUxThemeLib::pOpenThemeData = Q_NULLPTR;
+QWindowsUxThemeLib::PtrCloseThemeData QWindowsUxThemeLib::pCloseThemeData = Q_NULLPTR;
+QWindowsUxThemeLib::PtrDrawThemeBackground QWindowsUxThemeLib::pDrawThemeBackground = Q_NULLPTR;
+QWindowsUxThemeLib::PtrDrawThemeBackgroundEx QWindowsUxThemeLib::pDrawThemeBackgroundEx = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetCurrentThemeName QWindowsUxThemeLib::pGetCurrentThemeName = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeBool QWindowsUxThemeLib::pGetThemeBool = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeColor QWindowsUxThemeLib::pGetThemeColor = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeEnumValue QWindowsUxThemeLib::pGetThemeEnumValue = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeFilename QWindowsUxThemeLib::pGetThemeFilename = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeFont QWindowsUxThemeLib::pGetThemeFont = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeInt QWindowsUxThemeLib::pGetThemeInt = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeIntList QWindowsUxThemeLib::pGetThemeIntList = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeMargins QWindowsUxThemeLib::pGetThemeMargins = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeMetric QWindowsUxThemeLib::pGetThemeMetric = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemePartSize QWindowsUxThemeLib::pGetThemePartSize = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemePosition QWindowsUxThemeLib::pGetThemePosition = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemePropertyOrigin QWindowsUxThemeLib::pGetThemePropertyOrigin = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeRect QWindowsUxThemeLib::pGetThemeRect = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeString QWindowsUxThemeLib::pGetThemeString = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeBackgroundRegion QWindowsUxThemeLib::pGetThemeBackgroundRegion = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeDocumentationProperty QWindowsUxThemeLib::pGetThemeDocumentationProperty = Q_NULLPTR;
+QWindowsUxThemeLib::PtrIsThemeBackgroundPartiallyTransparent
+    QWindowsUxThemeLib::pIsThemeBackgroundPartiallyTransparent = Q_NULLPTR;
+QWindowsUxThemeLib::PtrSetWindowTheme QWindowsUxThemeLib::pSetWindowTheme = Q_NULLPTR;
+QWindowsUxThemeLib::PtrGetThemeTransitionDuration QWindowsUxThemeLib::pGetThemeTransitionDuration = Q_NULLPTR;
+
+bool QWindowsUxThemeLib::resolveSymbols()
+{
+    static bool tried = false;
+    if (tried)
+        return pIsAppThemed != Q_NULLPTR;
+    tried = true;
+    QSystemLibrary themeLib(QLatin1String("uxtheme"));
+    if (!themeLib.load())
+        return false;
+    pIsAppThemed = (PtrIsAppThemed)themeLib.resolve("IsAppThemed");
+    if (!pIsAppThemed)
+        return false;
+    pIsThemeActive          = (PtrIsThemeActive         )themeLib.resolve("IsThemeActive");
+    pGetThemePartSize       = (PtrGetThemePartSize      )themeLib.resolve("GetThemePartSize");
+    pOpenThemeData          = (PtrOpenThemeData         )themeLib.resolve("OpenThemeData");
+    pCloseThemeData         = (PtrCloseThemeData        )themeLib.resolve("CloseThemeData");
+    pDrawThemeBackground    = (PtrDrawThemeBackground   )themeLib.resolve("DrawThemeBackground");
+    pDrawThemeBackgroundEx  = (PtrDrawThemeBackgroundEx )themeLib.resolve("DrawThemeBackgroundEx");
+    pGetCurrentThemeName    = (PtrGetCurrentThemeName   )themeLib.resolve("GetCurrentThemeName");
+    pGetThemeBool           = (PtrGetThemeBool          )themeLib.resolve("GetThemeBool");
+    pGetThemeColor          = (PtrGetThemeColor         )themeLib.resolve("GetThemeColor");
+    pGetThemeEnumValue      = (PtrGetThemeEnumValue     )themeLib.resolve("GetThemeEnumValue");
+    pGetThemeFilename       = (PtrGetThemeFilename      )themeLib.resolve("GetThemeFilename");
+    pGetThemeFont           = (PtrGetThemeFont          )themeLib.resolve("GetThemeFont");
+    pGetThemeInt            = (PtrGetThemeInt           )themeLib.resolve("GetThemeInt");
+    pGetThemeIntList        = (PtrGetThemeIntList       )themeLib.resolve("GetThemeIntList");
+    pGetThemeMargins        = (PtrGetThemeMargins       )themeLib.resolve("GetThemeMargins");
+    pGetThemeMetric         = (PtrGetThemeMetric        )themeLib.resolve("GetThemeMetric");
+    pGetThemePartSize       = (PtrGetThemePartSize      )themeLib.resolve("GetThemePartSize");
+    pGetThemePosition       = (PtrGetThemePosition      )themeLib.resolve("GetThemePosition");
+    pGetThemePropertyOrigin = (PtrGetThemePropertyOrigin)themeLib.resolve("GetThemePropertyOrigin");
+    pGetThemeRect           = (PtrGetThemeRect          )themeLib.resolve("GetThemeRect");
+    pGetThemeString         = (PtrGetThemeString        )themeLib.resolve("GetThemeString");
+    pGetThemeBackgroundRegion              = (PtrGetThemeBackgroundRegion             )themeLib.resolve("GetThemeBackgroundRegion");
+    pGetThemeDocumentationProperty         = (PtrGetThemeDocumentationProperty        )themeLib.resolve("GetThemeDocumentationProperty");
+    pIsThemeBackgroundPartiallyTransparent = (PtrIsThemeBackgroundPartiallyTransparent)themeLib.resolve("IsThemeBackgroundPartiallyTransparent");
+    pSetWindowTheme         = (PtrSetWindowTheme        )themeLib.resolve("SetWindowTheme");
+    if (QSysInfo::windowsVersion() >= QSysInfo::WV_VISTA)
+        pGetThemeTransitionDuration = (PtrGetThemeTransitionDuration)themeLib.resolve("GetThemeTransitionDuration");
+     return true;
+}
 
 // General const values
 static const int windowsItemFrame        =  2; // menu item frame width
@@ -211,7 +223,7 @@ RECT XPThemeData::toRECT(const QRect &qr)
 */
 HRGN XPThemeData::mask(QWidget *widget)
 {
-    if (!pIsThemeBackgroundPartiallyTransparent(handle(), partId, stateId))
+    if (!QWindowsXPStylePrivate::pIsThemeBackgroundPartiallyTransparent(handle(), partId, stateId))
         return 0;
 
     HRGN hrgn;
@@ -219,7 +231,7 @@ HRGN XPThemeData::mask(QWidget *widget)
     if (widget)
         dc = hdcForWidgetBackingStore(widget);
     RECT nativeRect = toRECT(rect);
-    pGetThemeBackgroundRegion(handle(), dc, partId, stateId, &nativeRect, &hrgn);
+    QWindowsXPStylePrivate::pGetThemeBackgroundRegion(handle(), dc, partId, stateId, &nativeRect, &hrgn);
     return hrgn;
 }
 
@@ -264,7 +276,7 @@ bool QWindowsXPStylePrivate::useXP(bool update)
 {
     if (!update)
         return use_xp;
-    return (use_xp = resolveSymbols() && pIsThemeActive()
+    return (use_xp = QWindowsUxThemeLib::resolveSymbols() && pIsThemeActive()
             && (pIsAppThemed() || !QApplication::instance()));
 }
 
@@ -391,22 +403,21 @@ HWND QWindowsXPStylePrivate::winId(const QWidget *widget)
     height of the screen. This way the theme engine doesn't need to
     scale the body for every time we ask for it. (Speed optimization)
 */
-const QPixmap *QWindowsXPStylePrivate::tabBody(QWidget *)
+const QPixmap *QWindowsXPStylePrivate::tabBody(QWidget *widget)
 {
     if (!tabbody) {
-        SIZE sz;
         XPThemeData theme(0, 0, QWindowsXPStylePrivate::TabTheme, TABP_BODY);
-        pGetThemePartSize(theme.handle(), qt_win_display_dc(), TABP_BODY, 0, 0, TS_TRUE, &sz);
+        const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
 
-        tabbody = new QPixmap(sz.cx, QApplication::desktop()->screenGeometry().height());
+        tabbody = new QPixmap(size.width(), QApplication::desktop()->screenGeometry().height());
         QPainter painter(tabbody);
-        theme.rect = QRect(0, 0, sz.cx, sz.cy);
+        theme.rect = QRect(QPoint(0, 0), size);
         drawBackground(theme);
         // We fill with the last line of the themedata, that
         // way we don't get a tiled pixmap inside big tabs
-        QPixmap temp(sz.cx, 1);
-        painter.drawPixmap(0, 0, temp, 0, sz.cy-1, -1, -1);
-        painter.drawTiledPixmap(0, sz.cy, sz.cx, tabbody->height()-sz.cy, temp);
+        QPixmap temp(size.width(), 1);
+        painter.drawPixmap(0, 0, temp, 0, size.height() - 1, -1, -1);
+        painter.drawTiledPixmap(0, size.height(), size.width(), tabbody->height() - size.height(), temp);
     }
     return tabbody;
 }
@@ -1213,9 +1224,9 @@ void QWindowsXPStyle::polish(QWidget *widget)
         // Get text color for group box labels
         COLORREF cref;
         XPThemeData theme(0, 0, QWindowsXPStylePrivate::ButtonTheme, 0, 0);
-        pGetThemeColor(theme.handle(), BP_GROUPBOX, GBS_NORMAL, TMT_TEXTCOLOR, &cref);
+        QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), BP_GROUPBOX, GBS_NORMAL, TMT_TEXTCOLOR, &cref);
         d->groupBoxTextColor = qRgb(GetRValue(cref), GetGValue(cref), GetBValue(cref));
-        pGetThemeColor(theme.handle(), BP_GROUPBOX, GBS_DISABLED, TMT_TEXTCOLOR, &cref);
+        QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), BP_GROUPBOX, GBS_DISABLED, TMT_TEXTCOLOR, &cref);
         d->groupBoxTextColorDisabled = qRgb(GetRValue(cref), GetGValue(cref), GetBValue(cref));
         // Where does this color come from?
         //pGetThemeColor(theme.handle(), TKP_TICS, TSS_NORMAL, TMT_COLOR, &cref);
@@ -1340,7 +1351,7 @@ QRect QWindowsXPStyle::subElementRect(SubElement sr, const QStyleOption *option,
                     int border = proxy()->pixelMetric(PM_DefaultFrameWidth, btn, widget);
                     rect = option->rect.adjusted(border, border, -border, -border);
 
-                    int result = pGetThemeMargins(theme,
+                    int result = QWindowsXPStylePrivate::pGetThemeMargins(theme,
                                                   NULL,
                                                   BP_PUSHBUTTON,
                                                   stateId,
@@ -1535,10 +1546,10 @@ case PE_Frame:
         else
             stateId = ETS_NORMAL;
         int fillType;
-        if (pGetThemeEnumValue(theme.handle(), partId, stateId, TMT_BGTYPE, &fillType) == S_OK) {
+        if (QWindowsXPStylePrivate::pGetThemeEnumValue(theme.handle(), partId, stateId, TMT_BGTYPE, &fillType) == S_OK) {
             if (fillType == BT_BORDERFILL) {
                 COLORREF bcRef;
-                pGetThemeColor(theme.handle(), partId, stateId, TMT_BORDERCOLOR, &bcRef);
+                QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), partId, stateId, TMT_BORDERCOLOR, &bcRef);
                 QColor bordercolor(qRgb(GetRValue(bcRef), GetGValue(bcRef), GetBValue(bcRef)));
                 QPen oldPen = p->pen();
                 // int borderSize = 1;
@@ -1619,7 +1630,7 @@ case PE_Frame:
                     return;
                 }
                 int bgType;
-                pGetThemeEnumValue( theme.handle(),
+                QWindowsXPStylePrivate::pGetThemeEnumValue( theme.handle(),
                                     partId,
                                     stateId,
                                     TMT_BGTYPE,
@@ -1636,11 +1647,11 @@ case PE_Frame:
 
                     if (!isEnabled) {
                         PROPERTYORIGIN origin = PO_NOTFOUND;
-                        pGetThemePropertyOrigin(theme.handle(), theme.partId, theme.stateId, TMT_FILLCOLOR, &origin);
+                        QWindowsXPStylePrivate::pGetThemePropertyOrigin(theme.handle(), theme.partId, theme.stateId, TMT_FILLCOLOR, &origin);
                         // Use only if the fill property comes from our part
                         if ((origin == PO_PART || origin == PO_STATE)) {
                             COLORREF bgRef;
-                            pGetThemeColor(theme.handle(), partId, stateId, TMT_FILLCOLOR, &bgRef);
+                            QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), partId, stateId, TMT_FILLCOLOR, &bgRef);
                             fillColor = QBrush(qRgb(GetRValue(bgRef), GetGValue(bgRef), GetBValue(bgRef)));
                         }
                     }
@@ -1666,7 +1677,7 @@ case PE_Frame:
                 wchar_t themeFileName[maxlength];
                 wchar_t themeColor[maxlength];
                 // Due to a a scaling issue with the XP Silver theme, tab gradients are not used with it
-                if (pGetCurrentThemeName(themeFileName, maxlength, themeColor, maxlength, NULL, 0) == S_OK) {
+                if (QWindowsXPStylePrivate::pGetCurrentThemeName(themeFileName, maxlength, themeColor, maxlength, NULL, 0) == S_OK) {
                     wchar_t *offset = 0;
                     if ((offset = wcsrchr(themeFileName, QChar(QLatin1Char('\\')).unicode())) != NULL) {
                         offset++;
@@ -1982,25 +1993,24 @@ void QWindowsXPStyle::drawControl(ControlElement element, const QStyleOption *op
         {
             themeNumber = QWindowsXPStylePrivate::StatusTheme;
             partId = SP_GRIPPER;
-            SIZE sz;
             XPThemeData theme(0, p, themeNumber, partId, 0);
-            pGetThemePartSize(theme.handle(), 0, partId, 0, 0, TS_TRUE, &sz);
-            --sz.cy;
+            QSize size = theme.size() / QWindowsStylePrivate::devicePixelRatio(widget);
+            size.rheight()--;
             if (const QStyleOptionSizeGrip *sg = qstyleoption_cast<const QStyleOptionSizeGrip *>(option)) {
                 switch (sg->corner) {
                     case Qt::BottomRightCorner:
-                        rect = QRect(rect.right() - sz.cx, rect.bottom() - sz.cy, sz.cx, sz.cy);
+                        rect = QRect(QPoint(rect.right() - size.width(), rect.bottom() - size.height()), size);
                         break;
                     case Qt::BottomLeftCorner:
-                        rect = QRect(rect.left() + 1, rect.bottom() - sz.cy, sz.cx, sz.cy);
+                        rect = QRect(QPoint(rect.left() + 1, rect.bottom() - size.height()), size);
                         hMirrored = true;
                         break;
                     case Qt::TopRightCorner:
-                        rect = QRect(rect.right() - sz.cx, rect.top() + 1, sz.cx, sz.cy);
+                        rect = QRect(QPoint(rect.right() - size.width(), rect.top() + 1), size);
                         vMirrored = true;
                         break;
                     case Qt::TopLeftCorner:
-                        rect = QRect(rect.left() + 1, rect.top() + 1, sz.cx, sz.cy);
+                        rect = QRect(rect.topLeft() + QPoint(1, 1), size);
                         hMirrored = vMirrored = true;
                 }
             }
@@ -2055,10 +2065,9 @@ void QWindowsXPStyle::drawControl(ControlElement element, const QStyleOption *op
                                   QWindowsXPStylePrivate::ToolBarTheme,
                                   TP_SPLITBUTTONDROPDOWN);
                 if (theme.isValid()) {
-                    SIZE size;
-                    pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                    mbiw = size.cx;
-                    mbih = size.cy;
+                    const QSize size = theme.size() / QWindowsStylePrivate::devicePixelRatio(widget);
+                    mbiw = size.width();
+                    mbih = size.height();
                 }
 
                 QRect ir = btn->rect;
@@ -2237,8 +2246,8 @@ void QWindowsXPStyle::drawControl(ControlElement element, const QStyleOption *op
                 QPixmap pixmap = checked ?
                                  menuitem->icon.pixmap(proxy()->pixelMetric(PM_SmallIconSize, option, widget), mode, QIcon::On) :
                                  menuitem->icon.pixmap(proxy()->pixelMetric(PM_SmallIconSize, option, widget), mode);
-                int pixw = pixmap.width();
-                int pixh = pixmap.height();
+                const int pixw = pixmap.width() / pixmap.devicePixelRatio();
+                const int pixh = pixmap.height() / pixmap.devicePixelRatio();
                 QRect iconRect(0, 0, pixw, pixh);
                 iconRect.moveCenter(QRect(xpos, y, checkcol, h).center());
                 QRect vIconRect = visualRect(option->direction, option->rect, iconRect);
@@ -2450,10 +2459,10 @@ void QWindowsXPStyle::drawControl(ControlElement element, const QStyleOption *op
                         = p->fontMetrics().elidedText(dwOpt->title, Qt::ElideRight, titleRect.width());
 
                     int result = TST_NONE;
-                    pGetThemeEnumValue(theme.handle(), WP_SMALLCAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWTYPE, &result);
+                    QWindowsXPStylePrivate::pGetThemeEnumValue(theme.handle(), WP_SMALLCAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWTYPE, &result);
                     if (result != TST_NONE) {
                         COLORREF textShadowRef;
-                        pGetThemeColor(theme.handle(), WP_SMALLCAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWCOLOR, &textShadowRef);
+                        QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), WP_SMALLCAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWCOLOR, &textShadowRef);
                         QColor textShadow = qRgb(GetRValue(textShadowRef), GetGValue(textShadowRef), GetBValue(textShadowRef));
                         p->setPen(textShadow);
                         drawItemText(p, titleRect.adjusted(1, 1, 1, 1),
@@ -2741,7 +2750,6 @@ void QWindowsXPStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCo
                         stateId = SCRBS_NORMAL;
 
                     // Draw handle
-                    theme.rect = proxy()->subControlRect(CC_ScrollBar, option, SC_ScrollBarSlider, widget);
                     theme.partId = flags & State_Horizontal ? SBP_THUMBBTNHORZ : SBP_THUMBBTNVERT;
                     theme.stateId = stateId;
                     d->drawBackground(theme);
@@ -2750,28 +2758,19 @@ void QWindowsXPStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCo
                     const int swidth = theme.rect.width();
                     const int sheight = theme.rect.height();
 
-                    MARGINS contentsMargin;
-                    RECT rect = theme.toRECT(theme.rect);
-                    pGetThemeMargins(theme.handle(), 0, theme.partId, theme.stateId, TMT_SIZINGMARGINS, &rect, &contentsMargin);
+                    const QMargins contentsMargin = theme.margins(theme.rect, TMT_SIZINGMARGINS)
+                                                    / QWindowsStylePrivate::devicePixelRatio(widget);
 
-                    SIZE size;
                     theme.partId = flags & State_Horizontal ? SBP_GRIPPERHORZ : SBP_GRIPPERVERT;
-                    pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                    int gw = size.cx, gh = size.cy;
-
-
-                    QRect gripperBounds;
-                    if (flags & State_Horizontal && ((swidth - contentsMargin.cxLeftWidth - contentsMargin.cxRightWidth) > gw)) {
-                        gripperBounds.setLeft(theme.rect.left() + swidth/2 - gw/2);
-                        gripperBounds.setTop(theme.rect.top() + sheight/2 - gh/2);
-                        gripperBounds.setWidth(gw);
-                        gripperBounds.setHeight(gh);
-                    } else if ((sheight - contentsMargin.cyTopHeight - contentsMargin.cyBottomHeight) > gh) {
-                        gripperBounds.setLeft(theme.rect.left() + swidth/2 - gw/2);
-                        gripperBounds.setTop(theme.rect.top() + sheight/2 - gh/2);
-                        gripperBounds.setWidth(gw);
-                        gripperBounds.setHeight(gh);
+                    const QSize size = theme.size() / QWindowsStylePrivate::devicePixelRatio(widget);
+                    QPoint gripperBoundsPos(0, 0);
+                    if ((flags & State_Horizontal
+                         && swidth - contentsMargin.left() - contentsMargin.right() > size.width())
+                        || sheight - contentsMargin.top() - contentsMargin.bottom() > size.height()) {
+                        gripperBoundsPos = QPoint(theme.rect.left() + (swidth - size.width()) / 2,
+                                                  theme.rect.top() + (sheight - size.height()) /2);
                     }
+                    const QRect gripperBounds(gripperBoundsPos, size);
 
                     // Draw gripper if there is enough space
                     if (!gripperBounds.isEmpty()) {
@@ -3062,10 +3061,10 @@ void QWindowsXPStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCo
                     QRect ir = proxy()->subControlRect(CC_TitleBar, tb, SC_TitleBarLabel, widget);
 
                     int result = TST_NONE;
-                    pGetThemeEnumValue(theme.handle(), WP_CAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWTYPE, &result);
+                    QWindowsXPStylePrivate::pGetThemeEnumValue(theme.handle(), WP_CAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWTYPE, &result);
                     if (result != TST_NONE) {
                         COLORREF textShadowRef;
-                        pGetThemeColor(theme.handle(), WP_CAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWCOLOR, &textShadowRef);
+                        QWindowsXPStylePrivate::pGetThemeColor(theme.handle(), WP_CAPTION, isActive ? CS_ACTIVE : CS_INACTIVE, TMT_TEXTSHADOWCOLOR, &textShadowRef);
                         QColor textShadow = qRgb(GetRValue(textShadowRef), GetGValue(textShadowRef), GetBValue(textShadowRef));
                         p->setPen(textShadow);
                         p->drawText(ir.x() + 3, ir.y() + 2, ir.width() - 1, ir.height(),
@@ -3093,9 +3092,7 @@ void QWindowsXPStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCo
                     } else {
                         theme.partId = partId;
                         theme.stateId = stateId;
-                        SIZE sz;
-                        pGetThemePartSize(theme.handle(), qt_win_display_dc(), theme.partId, theme.stateId, 0, TS_TRUE, &sz);
-                        if (sz.cx == 0 || sz.cy == 0) {
+                        if (theme.size().isEmpty()) {
                             int iconSize = proxy()->pixelMetric(PM_SmallIconSize, tb, widget);
                             QPixmap pm = proxy()->standardIcon(SP_TitleBarMenuButton, tb, widget).pixmap(iconSize, iconSize);
                             p->save();
@@ -3310,23 +3307,63 @@ void QWindowsXPStyle::drawComplexControl(ComplexControl cc, const QStyleOptionCo
     }
 }
 
+static inline Qt::Orientation progressBarOrientation(const QStyleOption *option = 0)
+{
+    if (const QStyleOptionProgressBarV2 *pb2 = qstyleoption_cast<const QStyleOptionProgressBarV2 *>(option))
+        return pb2->orientation;
+    return Qt::Horizontal;
+}
+
+int QWindowsXPStylePrivate::pixelMetricFromSystemDp(QStyle::PixelMetric pm, const QStyleOption *option, const QWidget *widget)
+{
+    switch (pm) {
+    case QStyle::PM_IndicatorWidth:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_CHECKBOX, CBS_UNCHECKEDNORMAL).width();
+    case QStyle::PM_IndicatorHeight:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_CHECKBOX, CBS_UNCHECKEDNORMAL).height();
+    case QStyle::PM_ExclusiveIndicatorWidth:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_RADIOBUTTON, RBS_UNCHECKEDNORMAL).width();
+    case QStyle::PM_ExclusiveIndicatorHeight:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_RADIOBUTTON, RBS_UNCHECKEDNORMAL).height();
+    case QStyle::PM_ProgressBarChunkWidth:
+        return progressBarOrientation(option) == Qt::Horizontal
+            ? XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::ProgressTheme, PP_CHUNK).width()
+            : XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::ProgressTheme, PP_CHUNKVERT).height();
+    case QStyle::PM_SliderThickness:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::TrackBarTheme, TKP_THUMB).height();
+    case QStyle::PM_TitleBarHeight:
+        return widget && (widget->windowType() == Qt::Tool)
+            ? GetSystemMetrics(SM_CYSMCAPTION) + GetSystemMetrics(SM_CXSIZEFRAME)
+            : GetSystemMetrics(SM_CYCAPTION) + GetSystemMetrics(SM_CXSIZEFRAME);
+    case QStyle::PM_MdiSubWindowFrameWidth:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::WindowTheme, WP_FRAMELEFT, FS_ACTIVE).width();
+    case QStyle::PM_DockWidgetFrameWidth:
+        return XPThemeData::themeSize(widget, 0, QWindowsXPStylePrivate::WindowTheme, WP_SMALLFRAMERIGHT, FS_ACTIVE).width();
+    default:
+        break;
+    }
+    return QWindowsXPStylePrivate::InvalidMetric;
+}
+
 /*! \reimp */
 int QWindowsXPStyle::pixelMetric(PixelMetric pm, const QStyleOption *option, const QWidget *widget) const
 {
     if (!QWindowsXPStylePrivate::useXP())
         return QWindowsStyle::pixelMetric(pm, option, widget);
 
-    int res = 0;
+    int res = QWindowsXPStylePrivate::pixelMetricFromSystemDp(pm, option, widget);
+    if (res != QWindowsStylePrivate::InvalidMetric)
+        return res / QWindowsStylePrivate::devicePixelRatio(widget);
+
+    res = 0;
     switch (pm) {
     case PM_MenuBarPanelWidth:
+    case PM_ButtonDefaultIndicator:
         res = 0;
         break;
 
     case PM_DefaultFrameWidth:
-        if (qobject_cast<const QListView*>(widget))
-            res = 2;
-        else
-            res = 1;
+        res = qobject_cast<const QListView*>(widget) ? 2 : 1;
         break;
     case PM_MenuPanelWidth:
     case PM_SpinBoxFrameWidth:
@@ -3344,6 +3381,8 @@ int QWindowsXPStyle::pixelMetric(PixelMetric pm, const QStyleOption *option, con
             switch (tab->shape) {
             case QTabBar::RoundedNorth:
             case QTabBar::TriangularNorth:
+            case QTabBar::RoundedWest:
+            case QTabBar::TriangularWest:
                 res = 1;
                 break;
             case QTabBar::RoundedSouth:
@@ -3354,10 +3393,6 @@ int QWindowsXPStyle::pixelMetric(PixelMetric pm, const QStyleOption *option, con
             case QTabBar::TriangularEast:
                 res = 3;
                 break;
-            case QTabBar::RoundedWest:
-            case QTabBar::TriangularWest:
-                res = 1;
-                break;
             }
         }
         break;
@@ -3366,77 +3401,6 @@ int QWindowsXPStyle::pixelMetric(PixelMetric pm, const QStyleOption *option, con
         res = qMax(int(QStyleHelper::dpiScaled(5.)), QApplication::globalStrut().width());
         break;
 
-    case PM_IndicatorWidth:
-    case PM_IndicatorHeight:
-        {
-            XPThemeData theme(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_CHECKBOX, CBS_UNCHECKEDNORMAL);
-            if (theme.isValid()) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                res = (pm == PM_IndicatorWidth) ? size.cx : size.cy;
-            }
-        }
-        break;
-
-    case PM_ExclusiveIndicatorWidth:
-    case PM_ExclusiveIndicatorHeight:
-        {
-            XPThemeData theme(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_RADIOBUTTON, RBS_UNCHECKEDNORMAL);
-            if (theme.isValid()) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                res = (pm == PM_ExclusiveIndicatorWidth) ? size.cx : size.cy;
-            }
-        }
-        break;
-
-    case PM_ProgressBarChunkWidth:
-        {
-            Qt::Orientation orient = Qt::Horizontal;
-            if (const QStyleOptionProgressBarV2 *pb2 = qstyleoption_cast<const QStyleOptionProgressBarV2 *>(option))
-                orient = pb2->orientation;
-            XPThemeData theme(widget, 0, QWindowsXPStylePrivate::ProgressTheme,
-                              (orient == Qt::Horizontal) ? PP_CHUNK : PP_CHUNKVERT);
-            if (theme.isValid()) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                res = (orient == Qt::Horizontal) ? size.cx : size.cy;
-            }
-        }
-        break;
-
-    case PM_SliderThickness:
-        {
-            XPThemeData theme(widget, 0, QWindowsXPStylePrivate::TrackBarTheme,
-                              TKP_THUMB);
-            if (theme.isValid()) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                res = size.cy;
-            }
-        }
-        break;
-
-    case PM_TitleBarHeight:
-        {
-            if (widget && (widget->windowType() == Qt::Tool))
-                res = GetSystemMetrics(SM_CYSMCAPTION) + GetSystemMetrics(SM_CXSIZEFRAME);
-            else
-                res = GetSystemMetrics(SM_CYCAPTION) + GetSystemMetrics(SM_CXSIZEFRAME);
-        }
-        break;
-
-    case PM_MdiSubWindowFrameWidth:
-        {
-            XPThemeData theme(widget, 0, QWindowsXPStylePrivate::WindowTheme, WP_FRAMELEFT, FS_ACTIVE);
-            if (theme.isValid()) {
-                SIZE size;
-                pGetThemePartSize(theme.handle(), 0, WP_FRAMELEFT, FS_ACTIVE, 0, TS_TRUE, &size);
-                res = size.cx-1;
-            }
-        }
-        break;
-
     case PM_MdiSubWindowMinimizedWidth:
         res = 160;
         break;
@@ -3447,33 +3411,14 @@ int QWindowsXPStyle::pixelMetric(PixelMetric pm, const QStyleOption *option, con
         break;
 
 #endif // QT_NO_TOOLBAR
-    case PM_DockWidgetFrameWidth:
-    {
-        XPThemeData theme(widget, 0, QWindowsXPStylePrivate::WindowTheme, WP_SMALLFRAMERIGHT, FS_ACTIVE);
-        if (theme.isValid()) {
-            SIZE size;
-            pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-            res = size.cx;
-        }
-    }
-    break;
     case PM_DockWidgetSeparatorExtent:
-        res = int(QStyleHelper::dpiScaled(4.));
-        break;
     case PM_DockWidgetTitleMargin:
         res = int(QStyleHelper::dpiScaled(4.));
         break;
 
     case PM_ButtonShiftHorizontal:
     case PM_ButtonShiftVertical:
-        if (qstyleoption_cast<const QStyleOptionToolButton *>(option))
-            res = 1;
-        else
-            res = 0;
-        break;
-
-    case PM_ButtonDefaultIndicator:
-        res = 0;
+        res = qstyleoption_cast<const QStyleOptionToolButton *>(option) ? 1 : 0;
         break;
 
     default:
@@ -3553,8 +3498,11 @@ QRect QWindowsXPStyle::subControlRect(ComplexControl cc, const QStyleOptionCompl
             const bool isToolTitle = false;
             const int height = tb->rect.height();
             const int width = tb->rect.width();
-            int buttonHeight = GetSystemMetrics(SM_CYSIZE) - 4;
-            int buttonWidth = GetSystemMetrics(SM_CXSIZE) - 4;
+            const int buttonMargin = int(QStyleHelper::dpiScaled(4));
+            int buttonHeight = GetSystemMetrics(SM_CYSIZE) / QWindowsStylePrivate::devicePixelRatio(widget)
+                - buttonMargin;
+            int buttonWidth = GetSystemMetrics(SM_CXSIZE) / QWindowsStylePrivate::devicePixelRatio(widget)
+                - buttonMargin;
             const int delta = buttonWidth + 2;
             int controlTop = option->rect.bottom() - buttonHeight - 2;
             const int frameWidth = proxy()->pixelMetric(PM_MdiSubWindowFrameWidth, option, widget);
@@ -3746,20 +3694,12 @@ QSize QWindowsXPStyle::sizeFromContents(ContentsType ct, const QStyleOption *opt
     case CT_LineEdit:
     case CT_ComboBox:
         {
-            XPThemeData buttontheme(widget, 0, QWindowsXPStylePrivate::ButtonTheme);
-            HTHEME theme = buttontheme.handle();
-            MARGINS borderSize;
-            if (theme) {
-                int result = pGetThemeMargins(theme,
-                                              NULL,
-                                              BP_PUSHBUTTON,
-                                              PBS_NORMAL,
-                                              TMT_CONTENTMARGINS,
-                                              NULL,
-                                              &borderSize);
-                if (result == S_OK) {
-                    sz += QSize(borderSize.cxLeftWidth + borderSize.cxRightWidth - 2,
-                                borderSize.cyBottomHeight + borderSize.cyTopHeight - 2);
+            XPThemeData buttontheme(widget, 0, QWindowsXPStylePrivate::ButtonTheme, BP_PUSHBUTTON, PBS_NORMAL);
+            if (buttontheme.isValid()) {
+                const QMargins borderSize = buttontheme.margins() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                if (!borderSize.isNull()) {
+                    sz.rwidth() += borderSize.left() + borderSize.right() - 2;
+                    sz.rheight() += borderSize.bottom() + borderSize.top() - 2;
                 }
                 const int textMargins = 2*(proxy()->pixelMetric(PM_FocusFrameHMargin) + 1);
                 sz += QSize(qMax(pixelMetric(QStyle::PM_ScrollBarExtent, option, widget)
@@ -3929,9 +3869,8 @@ QPixmap QWindowsXPStyle::standardPixmap(StandardPixmap standardPixmap, const QSt
             if (widget && widget->isWindow()) {
                 XPThemeData theme(widget, 0, QWindowsXPStylePrivate::WindowTheme, WP_SMALLCLOSEBUTTON, CBS_NORMAL);
                 if (theme.isValid()) {
-                    SIZE sz;
-                    pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &sz);
-                    return QIcon(QWindowsStyle::standardPixmap(standardPixmap, option, widget)).pixmap(QSize(sz.cx, sz.cy));
+                    const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                    return QIcon(QWindowsStyle::standardPixmap(standardPixmap, option, widget)).pixmap(size);
                 }
             }
         }
@@ -3964,13 +3903,12 @@ QIcon QWindowsXPStyle::standardIcon(StandardPixmap standardIcon,
                 XPThemeData theme(0, 0, QWindowsXPStylePrivate::WindowTheme,
                                   WP_MAXBUTTON, MAXBS_NORMAL);
                 if (theme.isValid()) {
-                    SIZE size;
-                    pGetThemePartSize(themeSize.handle(), 0, themeSize.partId, themeSize.stateId, 0, TS_TRUE, &size);
-                    QPixmap pm = QPixmap(size.cx, size.cy);
+                    const QSize size = themeSize.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                    QPixmap pm(size);
                     pm.fill(Qt::transparent);
                     QPainter p(&pm);
                     theme.painter = &p;
-                    theme.rect = QRect(0, 0, size.cx, size.cy);
+                    theme.rect = QRect(QPoint(0, 0), size);
                     d->drawBackground(theme);
                     d->dockFloat.addPixmap(pm, QIcon::Normal, QIcon::Off);    // Normal
                     pm.fill(Qt::transparent);
@@ -3999,14 +3937,13 @@ QIcon QWindowsXPStyle::standardIcon(StandardPixmap standardIcon,
                 XPThemeData theme(0, 0, QWindowsXPStylePrivate::WindowTheme,
                                   WP_SMALLCLOSEBUTTON, CBS_NORMAL);
                 if (theme.isValid()) {
-                    SIZE size;
-                    pGetThemePartSize(theme.handle(), 0, theme.partId, theme.stateId, 0, TS_TRUE, &size);
-                    QPixmap pm = QPixmap(size.cx, size.cy);
+                    const QSize size = theme.size() / QWindowsXPStylePrivate::devicePixelRatio(widget);
+                    QPixmap pm(size);
                     pm.fill(Qt::transparent);
                     QPainter p(&pm);
                     theme.painter = &p;
                     theme.partId = WP_CLOSEBUTTON; // ####
-                    theme.rect = QRect(0, 0, size.cx, size.cy);
+                    theme.rect = QRect(QPoint(0, 0), size);
                     d->drawBackground(theme);
                     d->dockClose.addPixmap(pm, QIcon::Normal, QIcon::Off);    // Normal
                     pm.fill(Qt::transparent);
@@ -4036,13 +3973,12 @@ QIcon QWindowsXPStyle::standardIcon(StandardPixmap standardIcon,
                 XPThemeData theme(0, 0, QWindowsXPStylePrivate::WindowTheme,
                                   WP_RESTOREBUTTON, RBS_NORMAL);
                 if (theme.isValid()) {
-                    SIZE size;
-                    pGetThemePartSize(themeSize.handle(), 0, themeSize.partId, themeSize.stateId, 0, TS_TRUE, &size);
-                    QPixmap pm = QPixmap(size.cx, size.cy);
+                    const QSize size = themeSize.size() / QWindowsStylePrivate::devicePixelRatio(widget);
+                    QPixmap pm(size);
                     pm.fill(Qt::transparent);
                     QPainter p(&pm);
                     theme.painter = &p;
-                    theme.rect = QRect(0, 0, size.cx, size.cy);
+                    theme.rect = QRect(QPoint(0, 0), size);
                     d->drawBackground(theme);
                     d->dockFloat.addPixmap(pm, QIcon::Normal, QIcon::Off);    // Normal
                     pm.fill(Qt::transparent);
diff --git a/src/widgets/styles/qwindowsxpstyle_p.h b/src/widgets/styles/qwindowsxpstyle_p.h
index 4bb7c73660..65ded15fed 100644
--- a/src/widgets/styles/qwindowsxpstyle_p.h
+++ b/src/widgets/styles/qwindowsxpstyle_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/styles/qwindowsxpstyle_p_p.h b/src/widgets/styles/qwindowsxpstyle_p_p.h
index 7327fa5581..4f42b60681 100644
--- a/src/widgets/styles/qwindowsxpstyle_p_p.h
+++ b/src/widgets/styles/qwindowsxpstyle_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -219,9 +211,19 @@ public:
     HRGN mask(QWidget *widget);
     HTHEME handle();
 
-    RECT toRECT(const QRect &qr);
+    static RECT toRECT(const QRect &qr);
     bool isValid();
 
+    QSize size();
+    QMargins margins(const QRect &rect, int propId = TMT_CONTENTMARGINS);
+    QMargins margins(int propId = TMT_CONTENTMARGINS);
+
+    static QSize themeSize(const QWidget *w = 0, QPainter *p = 0, int themeIn = -1, int part = 0, int state = 0);
+    static QMargins themeMargins(const QRect &rect, const QWidget *w = 0, QPainter *p = 0, int themeIn = -1,
+                                 int part = 0, int state = 0, int propId = TMT_CONTENTMARGINS);
+    static QMargins themeMargins(const QWidget *w = 0, QPainter *p = 0, int themeIn = -1,
+                                 int part = 0, int state = 0, int propId = TMT_CONTENTMARGINS);
+
     const QWidget *widget;
     QPainter *painter;
 
@@ -282,7 +284,65 @@ struct ThemeMapData {
                      hasAlphaChannel(false), wasAlphaSwapped(false), hadInvalidAlpha(false) {}
 };
 
-class QWindowsXPStylePrivate : public QWindowsStylePrivate
+struct QWindowsUxThemeLib {
+    typedef bool (WINAPI *PtrIsAppThemed)();
+    typedef bool (WINAPI *PtrIsThemeActive)();
+    typedef HTHEME (WINAPI *PtrOpenThemeData)(HWND hwnd, LPCWSTR pszClassList);
+    typedef HRESULT (WINAPI *PtrCloseThemeData)(HTHEME hTheme);
+    typedef HRESULT (WINAPI *PtrDrawThemeBackground)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, const RECT *pRect, OPTIONAL const RECT *pClipRect);
+    typedef HRESULT (WINAPI *PtrDrawThemeBackgroundEx)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, const RECT *pRect, OPTIONAL const DTBGOPTS *pOptions);
+    typedef HRESULT (WINAPI *PtrGetCurrentThemeName)(OUT LPWSTR pszThemeFileName, int cchMaxNameChars, OUT OPTIONAL LPWSTR pszColorBuff, int cchMaxColorChars, OUT OPTIONAL LPWSTR pszSizeBuff, int cchMaxSizeChars);
+    typedef HRESULT (WINAPI *PtrGetThemeDocumentationProperty)(LPCWSTR pszThemeName, LPCWSTR pszPropertyName, OUT LPWSTR pszValueBuff, int cchMaxValChars);
+    typedef HRESULT (WINAPI *PtrGetThemeBool)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT BOOL *pfVal);
+    typedef HRESULT (WINAPI *PtrGetThemeColor)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT COLORREF *pColor);
+    typedef HRESULT (WINAPI *PtrGetThemeEnumValue)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT int *piVal);
+    typedef HRESULT (WINAPI *PtrGetThemeFilename)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT LPWSTR pszThemeFileName, int cchMaxBuffChars);
+    typedef HRESULT (WINAPI *PtrGetThemeFont)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OUT LOGFONT *pFont);
+    typedef HRESULT (WINAPI *PtrGetThemeInt)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT int *piVal);
+    typedef HRESULT (WINAPI *PtrGetThemeIntList)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT INTLIST *pIntList);
+    typedef HRESULT (WINAPI *PtrGetThemeMargins)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OPTIONAL RECT *prc, OUT MARGINS *pMargins);
+    typedef HRESULT (WINAPI *PtrGetThemeMetric)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, int iPropId, OUT int *piVal);
+    typedef HRESULT (WINAPI *PtrGetThemePartSize)(HTHEME hTheme, HDC hdc, int iPartId, int iStateId, OPTIONAL RECT *prc, enum THEMESIZE eSize, OUT SIZE *psz);
+    typedef HRESULT (WINAPI *PtrGetThemePosition)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT POINT *pPoint);
+    typedef HRESULT (WINAPI *PtrGetThemePropertyOrigin)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT enum PROPERTYORIGIN *pOrigin);
+    typedef HRESULT (WINAPI *PtrGetThemeRect)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT RECT *pRect);
+    typedef HRESULT (WINAPI *PtrGetThemeString)(HTHEME hTheme, int iPartId, int iStateId, int iPropId, OUT LPWSTR pszBuff, int cchMaxBuffChars);
+    typedef HRESULT (WINAPI *PtrGetThemeBackgroundRegion)(HTHEME hTheme, OPTIONAL HDC hdc, int iPartId, int iStateId, const RECT *pRect, OUT HRGN *pRegion);
+    typedef BOOL (WINAPI *PtrIsThemeBackgroundPartiallyTransparent)(HTHEME hTheme, int iPartId, int iStateId);
+    typedef HRESULT (WINAPI *PtrSetWindowTheme)(HWND hwnd, LPCWSTR pszSubAppName, LPCWSTR pszSubIdList);
+    typedef HRESULT (WINAPI *PtrGetThemeTransitionDuration)(HTHEME hTheme, int iPartId, int iStateFromId, int iStateToId, int iPropId, int *pDuration);
+
+    static bool resolveSymbols();
+
+    static PtrIsAppThemed pIsAppThemed;
+    static PtrIsThemeActive pIsThemeActive;
+    static PtrOpenThemeData pOpenThemeData;
+    static PtrCloseThemeData pCloseThemeData;
+    static PtrDrawThemeBackground pDrawThemeBackground;
+    static PtrDrawThemeBackgroundEx pDrawThemeBackgroundEx;
+    static PtrGetCurrentThemeName pGetCurrentThemeName;
+    static PtrGetThemeBool pGetThemeBool;
+    static PtrGetThemeColor pGetThemeColor;
+    static PtrGetThemeEnumValue pGetThemeEnumValue;
+    static PtrGetThemeFilename pGetThemeFilename;
+    static PtrGetThemeFont pGetThemeFont;
+    static PtrGetThemeInt pGetThemeInt;
+    static PtrGetThemeIntList pGetThemeIntList;
+    static PtrGetThemeMargins pGetThemeMargins;
+    static PtrGetThemeMetric pGetThemeMetric;
+    static PtrGetThemePartSize pGetThemePartSize;
+    static PtrGetThemePosition pGetThemePosition;
+    static PtrGetThemePropertyOrigin pGetThemePropertyOrigin;
+    static PtrGetThemeRect pGetThemeRect;
+    static PtrGetThemeString pGetThemeString;
+    static PtrGetThemeBackgroundRegion pGetThemeBackgroundRegion;
+    static PtrGetThemeDocumentationProperty pGetThemeDocumentationProperty;
+    static PtrIsThemeBackgroundPartiallyTransparent pIsThemeBackgroundPartiallyTransparent;
+    static PtrSetWindowTheme pSetWindowTheme;
+    static PtrGetThemeTransitionDuration pGetThemeTransitionDuration; // Windows Vista onwards.
+};
+
+class QWindowsXPStylePrivate : public QWindowsStylePrivate, public QWindowsUxThemeLib
 {
     Q_DECLARE_PUBLIC(QWindowsXPStyle)
 public:
@@ -316,6 +376,9 @@ public:
     ~QWindowsXPStylePrivate()
     { cleanup(); }
 
+    static int pixelMetricFromSystemDp(QStyle::PixelMetric pm, const QStyleOption *option = 0, const QWidget *widget = 0);
+    static int fixedPixelMetric(QStyle::PixelMetric pm, const QStyleOption *option = 0, const QWidget *widget = 0);
+
     static HWND winId(const QWidget *widget);
 
     void init(bool force = false);
@@ -374,6 +437,60 @@ private:
     static HTHEME m_themes[NThemes];
 };
 
+inline QSize XPThemeData::size()
+{
+    QSize result(0, 0);
+    if (isValid()) {
+        SIZE size;
+        if (SUCCEEDED(QWindowsXPStylePrivate::pGetThemePartSize(handle(), 0, partId, stateId, 0, TS_TRUE, &size)))
+            result = QSize(size.cx, size.cy);
+    }
+    return result;
+}
+
+inline QMargins XPThemeData::margins(const QRect &qRect, int propId)
+{
+    QMargins result(0, 0, 0 ,0);
+    if (isValid()) {
+        MARGINS margins;
+        RECT rect = XPThemeData::toRECT(qRect);
+        if (SUCCEEDED(QWindowsXPStylePrivate::pGetThemeMargins(handle(), 0, partId, stateId, propId, &rect, &margins)))
+            result = QMargins(margins.cxLeftWidth, margins.cyTopHeight, margins.cxRightWidth, margins.cyBottomHeight);
+    }
+    return result;
+}
+
+inline QMargins XPThemeData::margins(int propId)
+{
+    QMargins result(0, 0, 0 ,0);
+    if (isValid()) {
+        MARGINS margins;
+        if (SUCCEEDED(QWindowsXPStylePrivate::pGetThemeMargins(handle(), 0, partId, stateId, propId, NULL, &margins)))
+            result = QMargins(margins.cxLeftWidth, margins.cyTopHeight, margins.cxRightWidth, margins.cyBottomHeight);
+    }
+    return result;
+}
+
+inline QSize XPThemeData::themeSize(const QWidget *w, QPainter *p, int themeIn, int part, int state)
+{
+    XPThemeData theme(w, p, themeIn, part, state);
+    return theme.size();
+}
+
+inline QMargins XPThemeData::themeMargins(const QRect &rect, const QWidget *w, QPainter *p, int themeIn,
+                                          int part, int state, int propId)
+{
+    XPThemeData theme(w, p, themeIn, part, state);
+    return theme.margins(rect, propId);
+}
+
+inline QMargins XPThemeData::themeMargins(const QWidget *w, QPainter *p, int themeIn,
+                                          int part, int state, int propId)
+{
+    XPThemeData theme(w, p, themeIn, part, state);
+    return theme.margins(propId);
+}
+
 #endif // QT_NO_STYLE_WINDOWS
 
 QT_END_NAMESPACE
diff --git a/src/widgets/util/qcolormap.cpp b/src/widgets/util/qcolormap.cpp
index decfd7bd2c..584f30f7de 100644
--- a/src/widgets/util/qcolormap.cpp
+++ b/src/widgets/util/qcolormap.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qcolormap.h b/src/widgets/util/qcolormap.h
index 963be7e537..ebbe8b6607 100644
--- a/src/widgets/util/qcolormap.h
+++ b/src/widgets/util/qcolormap.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qcompleter.cpp b/src/widgets/util/qcompleter.cpp
index ab3c640421..0455cad92f 100644
--- a/src/widgets/util/qcompleter.cpp
+++ b/src/widgets/util/qcompleter.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qcompleter.h b/src/widgets/util/qcompleter.h
index c9533d5474..3bee280719 100644
--- a/src/widgets/util/qcompleter.h
+++ b/src/widgets/util/qcompleter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qcompleter_p.h b/src/widgets/util/qcompleter_p.h
index 1f890e0114..50f7cdacdb 100644
--- a/src/widgets/util/qcompleter_p.h
+++ b/src/widgets/util/qcompleter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qflickgesture.cpp b/src/widgets/util/qflickgesture.cpp
index b0cd4a9540..a5f2cf2e66 100644
--- a/src/widgets/util/qflickgesture.cpp
+++ b/src/widgets/util/qflickgesture.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -101,6 +93,8 @@ static QMouseEvent *copyMouseEvent(QEvent *e)
         copy->setButtons(me->buttons());
         copy->setButton(me->button());
         copy->setModifiers(me->modifiers());
+        copy->setSource(me->source());
+        copy->setFlags(me->flags());
         return copy;
 #endif
     }
diff --git a/src/widgets/util/qflickgesture_p.h b/src/widgets/util/qflickgesture_p.h
index 49a8049d44..497493b65b 100644
--- a/src/widgets/util/qflickgesture_p.h
+++ b/src/widgets/util/qflickgesture_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qscroller.cpp b/src/widgets/util/qscroller.cpp
index 235cbc7865..8cd7b97e30 100644
--- a/src/widgets/util/qscroller.cpp
+++ b/src/widgets/util/qscroller.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -746,9 +738,8 @@ void QScroller::ensureVisible(const QRectF &rect, qreal xmargin, qreal ymargin,
         return;
 
     // -- calculate the current pos (or the position after the current scroll)
-    QPointF startPos = d->contentPosition + d->overshootPosition;
-    startPos = QPointF(d->scrollingSegmentsEndPos(Qt::Horizontal),
-                       d->scrollingSegmentsEndPos(Qt::Vertical));
+    QPointF startPos(d->scrollingSegmentsEndPos(Qt::Horizontal),
+                     d->scrollingSegmentsEndPos(Qt::Vertical));
 
     QRectF marginRect(rect.x() - xmargin, rect.y() - ymargin,
                       rect.width() + 2 * xmargin, rect.height() + 2 * ymargin);
diff --git a/src/widgets/util/qscroller.h b/src/widgets/util/qscroller.h
index 1b382f3d31..bdbd015711 100644
--- a/src/widgets/util/qscroller.h
+++ b/src/widgets/util/qscroller.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qscroller_p.h b/src/widgets/util/qscroller_p.h
index a12c364960..ff9ea483ff 100644
--- a/src/widgets/util/qscroller_p.h
+++ b/src/widgets/util/qscroller_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qscrollerproperties.cpp b/src/widgets/util/qscrollerproperties.cpp
index 66b1c284c1..193396c4fc 100644
--- a/src/widgets/util/qscrollerproperties.cpp
+++ b/src/widgets/util/qscrollerproperties.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qscrollerproperties.h b/src/widgets/util/qscrollerproperties.h
index eb34c9701e..e35243eaca 100644
--- a/src/widgets/util/qscrollerproperties.h
+++ b/src/widgets/util/qscrollerproperties.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qscrollerproperties_p.h b/src/widgets/util/qscrollerproperties_p.h
index 4d962b6b78..cd50224a70 100644
--- a/src/widgets/util/qscrollerproperties_p.h
+++ b/src/widgets/util/qscrollerproperties_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qsystemtrayicon.cpp b/src/widgets/util/qsystemtrayicon.cpp
index f1a69e6b36..7d04cab05e 100644
--- a/src/widgets/util/qsystemtrayicon.cpp
+++ b/src/widgets/util/qsystemtrayicon.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -424,6 +416,14 @@ void QBalloonTip::hideBalloon()
     theSolitaryBalloonTip = 0;
 }
 
+void QBalloonTip::updateBalloonPosition(const QPoint& pos)
+{
+    if (!theSolitaryBalloonTip)
+        return;
+    theSolitaryBalloonTip->hide();
+    theSolitaryBalloonTip->balloon(pos, 0, theSolitaryBalloonTip->showArrow);
+}
+
 bool QBalloonTip::isBalloonVisible()
 {
     return theSolitaryBalloonTip;
@@ -557,6 +557,7 @@ void QBalloonTip::resizeEvent(QResizeEvent *ev)
 
 void QBalloonTip::balloon(const QPoint& pos, int msecs, bool showArrow)
 {
+    this->showArrow = showArrow;
     QRect scr = QApplication::desktop()->screenGeometry(pos);
     QSize sh = sizeHint();
     const int border = 1;
@@ -672,6 +673,74 @@ void QBalloonTip::timerEvent(QTimerEvent *e)
     QWidget::timerEvent(e);
 }
 
+//////////////////////////////////////////////////////////////////////
+void QSystemTrayIconPrivate::install_sys_qpa()
+{
+    qpa_sys->init();
+    QObject::connect(qpa_sys, SIGNAL(activated(QPlatformSystemTrayIcon::ActivationReason)),
+                     q_func(), SLOT(_q_emitActivated(QPlatformSystemTrayIcon::ActivationReason)));
+    QObject::connect(qpa_sys, &QPlatformSystemTrayIcon::messageClicked,
+                     q_func(), &QSystemTrayIcon::messageClicked);
+    updateMenu_sys();
+    updateIcon_sys();
+    updateToolTip_sys();
+}
+
+void QSystemTrayIconPrivate::remove_sys_qpa()
+{
+    qpa_sys->cleanup();
+}
+
+QRect QSystemTrayIconPrivate::geometry_sys_qpa() const
+{
+    return qpa_sys->geometry();
+}
+
+void QSystemTrayIconPrivate::updateIcon_sys_qpa()
+{
+    qpa_sys->updateIcon(icon);
+}
+
+void QSystemTrayIconPrivate::updateMenu_sys_qpa()
+{
+    if (menu) {
+        if (!menu->platformMenu()) {
+            QPlatformMenu *platformMenu = qpa_sys->createMenu();
+            if (platformMenu)
+                menu->setPlatformMenu(platformMenu);
+        }
+        qpa_sys->updateMenu(menu->platformMenu());
+    }
+}
+
+void QSystemTrayIconPrivate::updateToolTip_sys_qpa()
+{
+    qpa_sys->updateToolTip(toolTip);
+}
+
+void QSystemTrayIconPrivate::showMessage_sys_qpa(const QString &message,
+                                                 const QString &title,
+                                                 QSystemTrayIcon::MessageIcon icon,
+                                                 int msecs)
+{
+    QIcon notificationIcon;
+    switch (icon) {
+    case QSystemTrayIcon::Information:
+        notificationIcon = QApplication::style()->standardIcon(QStyle::SP_MessageBoxInformation);
+        break;
+    case QSystemTrayIcon::Warning:
+        notificationIcon = QApplication::style()->standardIcon(QStyle::SP_MessageBoxWarning);
+        break;
+    case QSystemTrayIcon::Critical:
+        notificationIcon = QApplication::style()->standardIcon(QStyle::SP_MessageBoxCritical);
+        break;
+    default:
+        break;
+    }
+    qpa_sys->showMessage(message, title, notificationIcon,
+                     static_cast<QPlatformSystemTrayIcon::MessageIcon>(icon), msecs);
+}
+
 QT_END_NAMESPACE
 
 #endif // QT_NO_SYSTEMTRAYICON
diff --git a/src/widgets/util/qsystemtrayicon.h b/src/widgets/util/qsystemtrayicon.h
index d6ba553a3a..4d92d811ed 100644
--- a/src/widgets/util/qsystemtrayicon.h
+++ b/src/widgets/util/qsystemtrayicon.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qsystemtrayicon_p.h b/src/widgets/util/qsystemtrayicon_p.h
index 211ef308f1..0dda689c51 100644
--- a/src/widgets/util/qsystemtrayicon_p.h
+++ b/src/widgets/util/qsystemtrayicon_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -98,6 +90,15 @@ public:
     QSystemTrayIconSys *sys;
     QPlatformSystemTrayIcon *qpa_sys;
     bool visible;
+
+private:
+    void install_sys_qpa();
+    void remove_sys_qpa();
+    void updateIcon_sys_qpa();
+    void updateToolTip_sys_qpa();
+    void updateMenu_sys_qpa();
+    QRect geometry_sys_qpa() const;
+    void showMessage_sys_qpa(const QString &msg, const QString &title, QSystemTrayIcon::MessageIcon icon, int secs);
 };
 
 class QBalloonTip : public QWidget
@@ -109,6 +110,7 @@ public:
                             const QPoint& pos, int timeout, bool showArrow = true);
     static void hideBalloon();
     static bool isBalloonVisible();
+    static void updateBalloonPosition(const QPoint& pos);
 
 private:
     QBalloonTip(QSystemTrayIcon::MessageIcon icon, const QString& title,
@@ -126,6 +128,7 @@ private:
     QSystemTrayIcon *trayIcon;
     QPixmap pixmap;
     int timerId;
+    bool showArrow;
 };
 
 QT_END_NAMESPACE
diff --git a/src/widgets/util/qsystemtrayicon_qpa.cpp b/src/widgets/util/qsystemtrayicon_qpa.cpp
index f98aeaf678..08764b405d 100644
--- a/src/widgets/util/qsystemtrayicon_qpa.cpp
+++ b/src/widgets/util/qsystemtrayicon_qpa.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,28 +57,20 @@ QSystemTrayIconPrivate::~QSystemTrayIconPrivate()
 
 void QSystemTrayIconPrivate::install_sys()
 {
-    if (qpa_sys) {
-        qpa_sys->init();
-        QObject::connect(qpa_sys, SIGNAL(activated(QPlatformSystemTrayIcon::ActivationReason)),
-                         q_func(), SLOT(_q_emitActivated(QPlatformSystemTrayIcon::ActivationReason)));
-        QObject::connect(qpa_sys, SIGNAL(messageClicked()),
-                         q_func(), SIGNAL(messageClicked()));
-        updateMenu_sys();
-        updateIcon_sys();
-        updateToolTip_sys();
-    }
+    if (qpa_sys)
+        install_sys_qpa();
 }
 
 void QSystemTrayIconPrivate::remove_sys()
 {
     if (qpa_sys)
-        qpa_sys->cleanup();
+        remove_sys_qpa();
 }
 
 QRect QSystemTrayIconPrivate::geometry_sys() const
 {
     if (qpa_sys)
-        return qpa_sys->geometry();
+        return geometry_sys_qpa();
     else
         return QRect();
 }
@@ -94,25 +78,19 @@ QRect QSystemTrayIconPrivate::geometry_sys() const
 void QSystemTrayIconPrivate::updateIcon_sys()
 {
     if (qpa_sys)
-        qpa_sys->updateIcon(icon);
+        updateIcon_sys_qpa();
 }
 
 void QSystemTrayIconPrivate::updateMenu_sys()
 {
-    if (qpa_sys && menu) {
-        if (!menu->platformMenu()) {
-            QPlatformMenu *platformMenu = qpa_sys->createMenu();
-            if (platformMenu)
-                menu->setPlatformMenu(platformMenu);
-        }
-        qpa_sys->updateMenu(menu->platformMenu());
-    }
+    if (qpa_sys)
+        updateMenu_sys_qpa();
 }
 
 void QSystemTrayIconPrivate::updateToolTip_sys()
 {
     if (qpa_sys)
-        qpa_sys->updateToolTip(toolTip);
+        updateToolTip_sys_qpa();
 }
 
 bool QSystemTrayIconPrivate::isSystemTrayAvailable_sys()
@@ -138,25 +116,8 @@ void QSystemTrayIconPrivate::showMessage_sys(const QString &message,
                                              QSystemTrayIcon::MessageIcon icon,
                                              int msecs)
 {
-    if (!qpa_sys)
-        return;
-
-    QIcon notificationIcon;
-    switch (icon) {
-    case QSystemTrayIcon::Information:
-        notificationIcon = QApplication::style()->standardIcon(QStyle::SP_MessageBoxInformation);
-        break;
-    case QSystemTrayIcon::Warning:
-        notificationIcon = QApplication::style()->standardIcon(QStyle::SP_MessageBoxWarning);
-        break;
-    case QSystemTrayIcon::Critical:
-        notificationIcon = QApplication::style()->standardIcon(QStyle::SP_MessageBoxCritical);
-        break;
-    default:
-        break;
-    }
-    qpa_sys->showMessage(message, title, notificationIcon,
-                     static_cast<QPlatformSystemTrayIcon::MessageIcon>(icon), msecs);
+    if (qpa_sys)
+        showMessage_sys_qpa(message, title, icon, msecs);
 }
 
 QT_END_NAMESPACE
diff --git a/src/widgets/util/qsystemtrayicon_win.cpp b/src/widgets/util/qsystemtrayicon_win.cpp
index a00b72484f..ba0e9026aa 100644
--- a/src/widgets/util/qsystemtrayicon_win.cpp
+++ b/src/widgets/util/qsystemtrayicon_win.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qsystemtrayicon_wince.cpp b/src/widgets/util/qsystemtrayicon_wince.cpp
index 6347ee6c04..fdd90b59b7 100644
--- a/src/widgets/util/qsystemtrayicon_wince.cpp
+++ b/src/widgets/util/qsystemtrayicon_wince.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qsystemtrayicon_x11.cpp b/src/widgets/util/qsystemtrayicon_x11.cpp
index 21ce23437f..cda557b6b0 100644
--- a/src/widgets/util/qsystemtrayicon_x11.cpp
+++ b/src/widgets/util/qsystemtrayicon_x11.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,6 +47,9 @@
 #include <qscreen.h>
 #include <qbackingstore.h>
 #include <qpa/qplatformnativeinterface.h>
+#include <qpa/qplatformsystemtrayicon.h>
+#include <qpa/qplatformtheme.h>
+#include <private/qguiapplication_p.h>
 #include <qdebug.h>
 
 #ifndef QT_NO_SYSTEMTRAYICON
@@ -84,6 +79,7 @@ protected:
     virtual bool event(QEvent *);
     virtual void paintEvent(QPaintEvent *);
     virtual void resizeEvent(QResizeEvent *);
+    virtual void moveEvent(QMoveEvent *);
 
 private slots:
     void systemTrayWindowChanged(QScreen *screen);
@@ -101,11 +97,24 @@ QSystemTrayIconSys::QSystemTrayIconSys(QSystemTrayIcon *qIn)
     setObjectName(QStringLiteral("QSystemTrayIconSys"));
     setToolTip(q->toolTip());
     setAttribute(Qt::WA_AlwaysShowToolTips, true);
-    setAttribute(Qt::WA_TranslucentBackground, true);
     setAttribute(Qt::WA_QuitOnClose, false);
     const QSize size(22, 22); // Gnome, standard size
     setGeometry(QRect(QPoint(0, 0), size));
     setMinimumSize(size);
+
+    // We need two different behaviors depending on whether the X11 visual for the system tray
+    // (a) exists and (b) supports an alpha channel, i.e. is 32 bits.
+    // If we have a visual that has an alpha channel, we can paint this widget with a transparent
+    // background and it will work.
+    // However, if there's no alpha channel visual, in order for transparent tray icons to work,
+    // we do not have a transparent background on the widget, but call xcb_clear_region before
+    // painting the icon
+    bool hasAlphaChannel = false;
+    QMetaObject::invokeMethod(QGuiApplication::platformNativeInterface(),
+                              "systrayVisualHasAlphaChannel", Qt::DirectConnection,
+                              Q_RETURN_ARG(bool, hasAlphaChannel));
+    setAttribute(Qt::WA_TranslucentBackground, hasAlphaChannel);
+
     addToTray();
 }
 
@@ -196,35 +205,59 @@ bool QSystemTrayIconSys::event(QEvent *e)
 
 void QSystemTrayIconSys::paintEvent(QPaintEvent *)
 {
-    // Note: Transparent pixels require a particular Visual which XCB
-    // currently does not support yet.
     const QRect rect(QPoint(0, 0), geometry().size());
     QPainter painter(this);
-    painter.setCompositionMode(QPainter::CompositionMode_Source);
-    painter.fillRect(rect, Qt::transparent);
+
+    // If we have Qt::WA_TranslucentBackground set, during widget creation
+    // we detected the systray visual supported an alpha channel
+    if (testAttribute(Qt::WA_TranslucentBackground)) {
+        painter.setCompositionMode(QPainter::CompositionMode_Source);
+        painter.fillRect(rect, Qt::transparent);
+    } else {
+        QMetaObject::invokeMethod(QGuiApplication::platformNativeInterface(),
+                                    "clearRegion", Qt::DirectConnection,
+                                    Q_ARG(const QWindow *, windowHandle()),
+                                    Q_ARG(const QRect&, rect)
+                                 );
+    }
     painter.setCompositionMode(QPainter::CompositionMode_SourceOver);
     q->icon().paint(&painter, rect);
 }
 
-void QSystemTrayIconSys::resizeEvent(QResizeEvent *)
+void QSystemTrayIconSys::moveEvent(QMoveEvent *event)
 {
-    update();
+    QWidget::moveEvent(event);
+    if (QBalloonTip::isBalloonVisible())
+        QBalloonTip::updateBalloonPosition(globalGeometry().center());
 }
 
+void QSystemTrayIconSys::resizeEvent(QResizeEvent *event)
+{
+    update();
+    QWidget::resizeEvent(event);
+    if (QBalloonTip::isBalloonVisible())
+        QBalloonTip::updateBalloonPosition(globalGeometry().center());
+}
 ////////////////////////////////////////////////////////////////////////////
 
 QSystemTrayIconPrivate::QSystemTrayIconPrivate()
     : sys(0),
+      qpa_sys(QGuiApplicationPrivate::platformTheme()->createPlatformSystemTrayIcon()),
       visible(false)
 {
 }
 
 QSystemTrayIconPrivate::~QSystemTrayIconPrivate()
 {
+    delete qpa_sys;
 }
 
 void QSystemTrayIconPrivate::install_sys()
 {
+    if (qpa_sys) {
+        install_sys_qpa();
+        return;
+    }
     Q_Q(QSystemTrayIcon);
     if (!sys && locateSystemTray()) {
         sys = new QSystemTrayIconSys(q);
@@ -235,6 +268,8 @@ void QSystemTrayIconPrivate::install_sys()
 
 QRect QSystemTrayIconPrivate::geometry_sys() const
 {
+    if (qpa_sys)
+        return geometry_sys_qpa();
     if (!sys)
         return QRect();
     return sys->globalGeometry();
@@ -242,6 +277,10 @@ QRect QSystemTrayIconPrivate::geometry_sys() const
 
 void QSystemTrayIconPrivate::remove_sys()
 {
+    if (qpa_sys) {
+        remove_sys_qpa();
+        return;
+    }
     if (!sys)
         return;
     QBalloonTip::hideBalloon();
@@ -252,17 +291,26 @@ void QSystemTrayIconPrivate::remove_sys()
 
 void QSystemTrayIconPrivate::updateIcon_sys()
 {
+    if (qpa_sys) {
+        updateIcon_sys_qpa();
+        return;
+    }
     if (sys)
         sys->updateIcon();
 }
 
 void QSystemTrayIconPrivate::updateMenu_sys()
 {
-
+    if (qpa_sys)
+        updateMenu_sys_qpa();
 }
 
 void QSystemTrayIconPrivate::updateToolTip_sys()
 {
+    if (qpa_sys) {
+        updateToolTip_sys_qpa();
+        return;
+    }
     if (!sys)
         return;
 #ifndef QT_NO_TOOLTIP
@@ -272,6 +320,11 @@ void QSystemTrayIconPrivate::updateToolTip_sys()
 
 bool QSystemTrayIconPrivate::isSystemTrayAvailable_sys()
 {
+    QScopedPointer<QPlatformSystemTrayIcon> sys(QGuiApplicationPrivate::platformTheme()->createPlatformSystemTrayIcon());
+    if (sys)
+        return sys->isSystemTrayAvailable();
+
+    // no QPlatformSystemTrayIcon so fall back to default xcb platform behavior
     const QString platform = QGuiApplication::platformName();
     if (platform.compare(QStringLiteral("xcb"), Qt::CaseInsensitive) == 0)
        return locateSystemTray();
@@ -280,17 +333,25 @@ bool QSystemTrayIconPrivate::isSystemTrayAvailable_sys()
 
 bool QSystemTrayIconPrivate::supportsMessages_sys()
 {
+    QScopedPointer<QPlatformSystemTrayIcon> sys(QGuiApplicationPrivate::platformTheme()->createPlatformSystemTrayIcon());
+    if (sys)
+        return sys->supportsMessages();
+
+    // no QPlatformSystemTrayIcon so fall back to default xcb platform behavior
     return true;
 }
 
 void QSystemTrayIconPrivate::showMessage_sys(const QString &message, const QString &title,
                                    QSystemTrayIcon::MessageIcon icon, int msecs)
 {
+    if (qpa_sys) {
+        showMessage_sys_qpa(message, title, icon, msecs);
+        return;
+    }
     if (!sys)
         return;
-    const QPoint g = sys->globalGeometry().topLeft();
     QBalloonTip::showBalloon(icon, message, title, sys->systemTrayIcon(),
-                             QPoint(g.x() + sys->width()/2, g.y() + sys->height()/2),
+                             sys->globalGeometry().center(),
                              msecs);
 }
 
diff --git a/src/widgets/util/qundogroup.cpp b/src/widgets/util/qundogroup.cpp
index a2b256b4ce..cbbe81d6cd 100644
--- a/src/widgets/util/qundogroup.cpp
+++ b/src/widgets/util/qundogroup.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qundogroup.h b/src/widgets/util/qundogroup.h
index 9a961d7eda..5dd1016ad9 100644
--- a/src/widgets/util/qundogroup.h
+++ b/src/widgets/util/qundogroup.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qundostack.cpp b/src/widgets/util/qundostack.cpp
index 2ca482be96..4da778f2c6 100644
--- a/src/widgets/util/qundostack.cpp
+++ b/src/widgets/util/qundostack.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qundostack.h b/src/widgets/util/qundostack.h
index 4756ca314f..e8dcdace9e 100644
--- a/src/widgets/util/qundostack.h
+++ b/src/widgets/util/qundostack.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qundostack_p.h b/src/widgets/util/qundostack_p.h
index 039350ea90..4e3664c2d6 100644
--- a/src/widgets/util/qundostack_p.h
+++ b/src/widgets/util/qundostack_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qundoview.cpp b/src/widgets/util/qundoview.cpp
index a7d89e7749..970541cf73 100644
--- a/src/widgets/util/qundoview.cpp
+++ b/src/widgets/util/qundoview.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/util/qundoview.h b/src/widgets/util/qundoview.h
index 80a0548bce..eafe926490 100644
--- a/src/widgets/util/qundoview.h
+++ b/src/widgets/util/qundoview.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets.pro b/src/widgets/widgets.pro
index b12e2836d4..d819436f66 100644
--- a/src/widgets/widgets.pro
+++ b/src/widgets/widgets.pro
@@ -9,8 +9,7 @@ win32-msvc*|win32-icc:QMAKE_LFLAGS += /BASE:0x65000000
 irix-cc*:QMAKE_CXXFLAGS += -no_prelink -ptused
 
 MODULE_PLUGIN_TYPES += \
-    styles \
-    accessible/libqtaccessiblewidgets.so
+    styles
 
 QMAKE_DOCS = $$PWD/doc/qtwidgets.qdocconf
 
diff --git a/src/widgets/widgets/qabstractbutton.cpp b/src/widgets/widgets/qabstractbutton.cpp
index acec526512..81fb779773 100644
--- a/src/widgets/widgets/qabstractbutton.cpp
+++ b/src/widgets/widgets/qabstractbutton.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractbutton.h b/src/widgets/widgets/qabstractbutton.h
index 4732f461e4..7fa50f4c0b 100644
--- a/src/widgets/widgets/qabstractbutton.h
+++ b/src/widgets/widgets/qabstractbutton.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractbutton_p.h b/src/widgets/widgets/qabstractbutton_p.h
index a148e60717..f83c45e499 100644
--- a/src/widgets/widgets/qabstractbutton_p.h
+++ b/src/widgets/widgets/qabstractbutton_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractscrollarea.cpp b/src/widgets/widgets/qabstractscrollarea.cpp
index 98e715fc62..3b75591998 100644
--- a/src/widgets/widgets/qabstractscrollarea.cpp
+++ b/src/widgets/widgets/qabstractscrollarea.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1191,6 +1183,12 @@ bool QAbstractScrollArea::viewportEvent(QEvent *e)
     case QEvent::DragMove:
     case QEvent::DragLeave:
 #endif
+#ifndef QT_NO_OPENGL
+        // QOpenGLWidget needs special support because it has to know
+        // its size has changed, so that it can resize its fbo.
+        if (e->type() == QEvent::Resize)
+            QWidgetPrivate::get(viewport())->resizeViewportFramebuffer();
+#endif
         return QFrame::event(e);
     case QEvent::LayoutRequest:
 #ifndef QT_NO_GESTURES
diff --git a/src/widgets/widgets/qabstractscrollarea.h b/src/widgets/widgets/qabstractscrollarea.h
index fb9562db1b..a3f6c3e2d4 100644
--- a/src/widgets/widgets/qabstractscrollarea.h
+++ b/src/widgets/widgets/qabstractscrollarea.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractscrollarea_p.h b/src/widgets/widgets/qabstractscrollarea_p.h
index 2a4b20fe81..aaf93a3352 100644
--- a/src/widgets/widgets/qabstractscrollarea_p.h
+++ b/src/widgets/widgets/qabstractscrollarea_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractslider.cpp b/src/widgets/widgets/qabstractslider.cpp
index 40d8c6b417..d9dae9d775 100644
--- a/src/widgets/widgets/qabstractslider.cpp
+++ b/src/widgets/widgets/qabstractslider.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractslider.h b/src/widgets/widgets/qabstractslider.h
index 82c8f409a0..99312a0ef7 100644
--- a/src/widgets/widgets/qabstractslider.h
+++ b/src/widgets/widgets/qabstractslider.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractslider_p.h b/src/widgets/widgets/qabstractslider_p.h
index 35ee934096..f22c55eb24 100644
--- a/src/widgets/widgets/qabstractslider_p.h
+++ b/src/widgets/widgets/qabstractslider_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qabstractspinbox.cpp b/src/widgets/widgets/qabstractspinbox.cpp
index 92af91b66e..778b4a8184 100644
--- a/src/widgets/widgets/qabstractspinbox.cpp
+++ b/src/widgets/widgets/qabstractspinbox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -315,6 +307,8 @@ void QAbstractSpinBox::setReadOnly(bool enable)
     Q_D(QAbstractSpinBox);
     d->readOnly = enable;
     d->edit->setReadOnly(enable);
+    QEvent event(QEvent::ReadOnlyChange);
+    QApplication::sendEvent(this, &event);
     update();
 }
 
@@ -697,6 +691,7 @@ void QAbstractSpinBox::setLineEdit(QLineEdit *lineEdit)
     }
     d->updateEditFieldGeometry();
     d->edit->setContextMenuPolicy(Qt::NoContextMenu);
+    d->edit->d_func()->control->setAccessibleObject(this);
 
     if (isVisible())
         d->edit->show();
@@ -1097,7 +1092,10 @@ void QAbstractSpinBox::keyReleaseEvent(QKeyEvent *event)
 #ifndef QT_NO_WHEELEVENT
 void QAbstractSpinBox::wheelEvent(QWheelEvent *event)
 {
-    const int steps = (event->delta() > 0 ? 1 : -1);
+    Q_D(QAbstractSpinBox);
+    d->wheelDeltaRemainder += event->angleDelta().y();
+    const int steps = d->wheelDeltaRemainder / 120;
+    d->wheelDeltaRemainder -= steps * 120;
     if (stepEnabled() & (steps > 0 ? StepUpEnabled : StepDownEnabled))
         stepBy(event->modifiers() & Qt::ControlModifier ? steps * 10 : steps);
     event->accept();
@@ -1341,7 +1339,7 @@ QAbstractSpinBoxPrivate::QAbstractSpinBoxPrivate()
       ignoreCursorPositionChanged(false), frame(true), accelerate(false), keyboardTracking(true),
       cleared(false), ignoreUpdateEdit(false), correctionMode(QAbstractSpinBox::CorrectToPreviousValue),
       acceleration(0), hoverControl(QStyle::SC_None), buttonSymbols(QAbstractSpinBox::UpDownArrows), validator(0),
-      showGroupSeparator(0)
+      showGroupSeparator(0), wheelDeltaRemainder(0)
 {
 }
 
diff --git a/src/widgets/widgets/qabstractspinbox.h b/src/widgets/widgets/qabstractspinbox.h
index 7989000cc8..8fcb5eadf0 100644
--- a/src/widgets/widgets/qabstractspinbox.h
+++ b/src/widgets/widgets/qabstractspinbox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -170,6 +162,7 @@ private:
 
     Q_DECLARE_PRIVATE(QAbstractSpinBox)
     Q_DISABLE_COPY(QAbstractSpinBox)
+    friend class QAccessibleAbstractSpinBox;
 };
 Q_DECLARE_OPERATORS_FOR_FLAGS(QAbstractSpinBox::StepEnabled)
 
diff --git a/src/widgets/widgets/qabstractspinbox_p.h b/src/widgets/widgets/qabstractspinbox_p.h
index da9f1d9757..b698cfc1ab 100644
--- a/src/widgets/widgets/qabstractspinbox_p.h
+++ b/src/widgets/widgets/qabstractspinbox_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -151,6 +143,7 @@ public:
     QAbstractSpinBox::ButtonSymbols buttonSymbols;
     QSpinBoxValidator *validator;
     uint showGroupSeparator : 1;
+    int wheelDeltaRemainder;
 };
 
 class QSpinBoxValidator : public QValidator
diff --git a/src/widgets/widgets/qbuttongroup.cpp b/src/widgets/widgets/qbuttongroup.cpp
index 1385ef590e..6a2131217e 100644
--- a/src/widgets/widgets/qbuttongroup.cpp
+++ b/src/widgets/widgets/qbuttongroup.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qbuttongroup.h b/src/widgets/widgets/qbuttongroup.h
index 06656bf18c..ad7bdffb62 100644
--- a/src/widgets/widgets/qbuttongroup.h
+++ b/src/widgets/widgets/qbuttongroup.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qcalendarwidget.cpp b/src/widgets/widgets/qcalendarwidget.cpp
index 8755f99288..d6704c20d2 100644
--- a/src/widgets/widgets/qcalendarwidget.cpp
+++ b/src/widgets/widgets/qcalendarwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -60,7 +52,6 @@
 #include <qapplication.h>
 #include <qbasictimer.h>
 #include <qstylepainter.h>
-#include <private/qcalendartextnavigator_p.h>
 
 QT_BEGIN_NAMESPACE
 
@@ -72,6 +63,8 @@ enum {
     MinimumDayOffset = 1
 };
 
+namespace {
+
 class QCalendarDateSectionValidator
 {
 public:
@@ -589,6 +582,7 @@ void QCalendarDateValidator::setFormat(const QString &format)
             const QChar nextChar = format.at(pos);
             if (quoting) {
                 separator += nextChar;
+                quoting = false;
             } else {
                 SectionToken *token = 0;
                 if (nextChar == QLatin1Char('d')) {
@@ -671,6 +665,47 @@ void QCalendarDateValidator::handleKeyEvent(QKeyEvent *keyEvent)
         toPreviousToken();
 }
 
+//////////////////////////////////
+
+class QCalendarTextNavigator: public QObject
+{
+    Q_OBJECT
+public:
+    QCalendarTextNavigator(QObject *parent = 0)
+        : QObject(parent), m_dateText(0), m_dateFrame(0), m_dateValidator(0), m_widget(0), m_editDelay(1500), m_date(QDate::currentDate()) { }
+
+    QWidget *widget() const;
+    void setWidget(QWidget *widget);
+
+    int dateEditAcceptDelay() const;
+    void setDateEditAcceptDelay(int delay);
+
+    QDate date() const;
+    void setDate(const QDate &date);
+
+    bool eventFilter(QObject *o, QEvent *e);
+    void timerEvent(QTimerEvent *e);
+
+signals:
+    void dateChanged(const QDate &date);
+    void editingFinished();
+
+private:
+    void applyDate();
+    void updateDateLabel();
+    void createDateLabel();
+    void removeDateLabel();
+
+    QLabel *m_dateText;
+    QFrame *m_dateFrame;
+    QBasicTimer m_acceptTimer;
+    QCalendarDateValidator *m_dateValidator;
+    QWidget *m_widget;
+    int m_editDelay;
+
+    QDate m_date;
+};
+
 QWidget *QCalendarTextNavigator::widget() const
 {
     return m_widget;
@@ -1573,6 +1608,8 @@ protected:
     }
 };
 
+} // unnamed namespace
+
 class QCalendarWidgetPrivate : public QWidgetPrivate
 {
     Q_DECLARE_PUBLIC(QCalendarWidget)
diff --git a/src/widgets/widgets/qcalendarwidget.h b/src/widgets/widgets/qcalendarwidget.h
index 4a4d21ebd6..e838098e53 100644
--- a/src/widgets/widgets/qcalendarwidget.h
+++ b/src/widgets/widgets/qcalendarwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qcheckbox.cpp b/src/widgets/widgets/qcheckbox.cpp
index 50d0ab8276..98a475d25c 100644
--- a/src/widgets/widgets/qcheckbox.cpp
+++ b/src/widgets/widgets/qcheckbox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qcheckbox.h b/src/widgets/widgets/qcheckbox.h
index 9adf5f6567..fe954571aa 100644
--- a/src/widgets/widgets/qcheckbox.h
+++ b/src/widgets/widgets/qcheckbox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -86,6 +78,7 @@ protected:
 private:
     Q_DECLARE_PRIVATE(QCheckBox)
     Q_DISABLE_COPY(QCheckBox)
+    friend class QAccessibleButton;
 };
 
 QT_END_NAMESPACE
diff --git a/src/widgets/widgets/qcombobox.cpp b/src/widgets/widgets/qcombobox.cpp
index eae0cbbd06..4db3ab38a6 100644
--- a/src/widgets/widgets/qcombobox.cpp
+++ b/src/widgets/widgets/qcombobox.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -165,10 +157,15 @@ QStyleOptionMenuItem QComboMenuDelegate::getStyleOption(const QStyleOptionViewIt
     if (mCombo->testAttribute(Qt::WA_SetFont)
             || mCombo->testAttribute(Qt::WA_MacSmallSize)
             || mCombo->testAttribute(Qt::WA_MacMiniSize)
-            || mCombo->font() != qt_app_fonts_hash()->value("QComboBox", QFont()))
+            || mCombo->font() != qt_app_fonts_hash()->value("QComboBox", QFont())) {
         menuOption.font = mCombo->font();
-    else
-        menuOption.font = qt_app_fonts_hash()->value("QComboMenuItem", mCombo->font());
+    } else {
+        QVariant fontRoleData = index.data(Qt::FontRole);
+        if (fontRoleData.isValid())
+            menuOption.font = fontRoleData.value<QFont>();
+        else
+            menuOption.font = qt_app_fonts_hash()->value("QComboMenuItem", mCombo->font());
+    }
 
     menuOption.fontMetrics = QFontMetrics(menuOption.font);
 
@@ -1275,8 +1272,8 @@ void QComboBoxPrivate::_q_emitHighlighted(const QModelIndex &index)
 void QComboBoxPrivate::_q_emitCurrentIndexChanged(const QModelIndex &index)
 {
     Q_Q(QComboBox);
-    emit q->currentIndexChanged(index.row());
     const QString text = itemText(index);
+    emit q->currentIndexChanged(index.row());
     emit q->currentIndexChanged(text);
     // signal lineEdit.textChanged already connected to signal currentTextChanged, so don't emit double here
     if (!lineEdit)
diff --git a/src/widgets/widgets/qcombobox.h b/src/widgets/widgets/qcombobox.h
index 0002cd08cb..806653d2d8 100644
--- a/src/widgets/widgets/qcombobox.h
+++ b/src/widgets/widgets/qcombobox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qcombobox_p.h b/src/widgets/widgets/qcombobox_p.h
index fb1ed71ee6..becdde55ae 100644
--- a/src/widgets/widgets/qcombobox_p.h
+++ b/src/widgets/widgets/qcombobox_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qcommandlinkbutton.cpp b/src/widgets/widgets/qcommandlinkbutton.cpp
index 18f7b1784e..76177d609c 100644
--- a/src/widgets/widgets/qcommandlinkbutton.cpp
+++ b/src/widgets/widgets/qcommandlinkbutton.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qcommandlinkbutton.h b/src/widgets/widgets/qcommandlinkbutton.h
index e18fb0a4f0..bfef2e300d 100644
--- a/src/widgets/widgets/qcommandlinkbutton.h
+++ b/src/widgets/widgets/qcommandlinkbutton.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdatetimeedit.cpp b/src/widgets/widgets/qdatetimeedit.cpp
index 770c954c2a..7b73fd8bdc 100644
--- a/src/widgets/widgets/qdatetimeedit.cpp
+++ b/src/widgets/widgets/qdatetimeedit.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdatetimeedit.h b/src/widgets/widgets/qdatetimeedit.h
index 0b6dfb6e28..5a1d6dbf3f 100644
--- a/src/widgets/widgets/qdatetimeedit.h
+++ b/src/widgets/widgets/qdatetimeedit.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdatetimeedit_p.h b/src/widgets/widgets/qdatetimeedit_p.h
index 3174ec9bde..c1e8a91678 100644
--- a/src/widgets/widgets/qdatetimeedit_p.h
+++ b/src/widgets/widgets/qdatetimeedit_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdial.cpp b/src/widgets/widgets/qdial.cpp
index 632e548e6f..0dd6515f5b 100644
--- a/src/widgets/widgets/qdial.cpp
+++ b/src/widgets/widgets/qdial.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdial.h b/src/widgets/widgets/qdial.h
index 16c4001517..de233b09b7 100644
--- a/src/widgets/widgets/qdial.h
+++ b/src/widgets/widgets/qdial.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdialogbuttonbox.cpp b/src/widgets/widgets/qdialogbuttonbox.cpp
index 86fc6fff5d..1ca02a594b 100644
--- a/src/widgets/widgets/qdialogbuttonbox.cpp
+++ b/src/widgets/widgets/qdialogbuttonbox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdialogbuttonbox.h b/src/widgets/widgets/qdialogbuttonbox.h
index 5cd94f88b0..e20a166d29 100644
--- a/src/widgets/widgets/qdialogbuttonbox.h
+++ b/src/widgets/widgets/qdialogbuttonbox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdockarealayout.cpp b/src/widgets/widgets/qdockarealayout.cpp
index 066b3c7a86..7ac2791112 100644
--- a/src/widgets/widgets/qdockarealayout.cpp
+++ b/src/widgets/widgets/qdockarealayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,6 +36,7 @@
 #include "QtWidgets/qtabbar.h"
 #include "QtWidgets/qstyle.h"
 #include "QtWidgets/qdesktopwidget.h"
+#include "QtWidgets/qapplication.h"
 #include "QtCore/qvariant.h"
 #include "qdockarealayout_p.h"
 #include "qdockwidget.h"
@@ -2978,8 +2971,9 @@ bool QDockAreaLayout::restoreDockWidget(QDockWidget *dockWidget)
     item.widgetItem = new QDockWidgetItem(dockWidget);
 
     if (placeHolder->window) {
-        QDesktopWidget desktop;
-        QRect r = constrainedRect(placeHolder->topLevelRect, desktop.screenGeometry(dockWidget));
+        const QRect screenGeometry =
+            QApplication::desktop()->screenGeometry(placeHolder->topLevelRect.center());
+        const QRect r = constrainedRect(placeHolder->topLevelRect, screenGeometry);
         dockWidget->d_func()->setWindowState(true, true, r);
     }
     dockWidget->setVisible(!placeHolder->hidden);
diff --git a/src/widgets/widgets/qdockarealayout_p.h b/src/widgets/widgets/qdockarealayout_p.h
index 86bf4d32e5..fbdcbbb7b3 100644
--- a/src/widgets/widgets/qdockarealayout_p.h
+++ b/src/widgets/widgets/qdockarealayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdockwidget.cpp b/src/widgets/widgets/qdockwidget.cpp
index ad9481a928..4be133e277 100644
--- a/src/widgets/widgets/qdockwidget.cpp
+++ b/src/widgets/widgets/qdockwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -591,10 +583,6 @@ void QDockWidgetPrivate::init()
     QObject::connect(button, SIGNAL(clicked()), q, SLOT(close()));
     layout->setWidgetForRole(QDockWidgetLayout::CloseButton, button);
 
-    resizer = new QWidgetResizeHandler(q);
-    resizer->setMovingEnabled(false);
-    resizer->setActive(false);
-
 #ifndef QT_NO_ACTION
     toggleViewAction = new QAction(q);
     toggleViewAction->setCheckable(true);
@@ -760,13 +748,12 @@ void QDockWidgetPrivate::endDrag(bool abort)
                     Qt::WindowFlags flags = q->windowFlags();
                     flags &= ~Qt::X11BypassWindowManagerHint;
                     q->setWindowFlags(flags);
-                    resizer->setActive(QWidgetResizeHandler::Resize, true);
+                    setResizerActive(true);
                     q->show();
                 } else {
                     QDockWidgetLayout *myLayout
                             = qobject_cast<QDockWidgetLayout*>(layout);
-                    resizer->setActive(QWidgetResizeHandler::Resize,
-                                       myLayout->widgetForRole(QDockWidgetLayout::TitleBar) != 0);
+                    setResizerActive(myLayout->widgetForRole(QDockWidgetLayout::TitleBar) != 0);
                 }
                 undockedGeometry = q->geometry();
                 q->activateWindow();
@@ -779,6 +766,17 @@ void QDockWidgetPrivate::endDrag(bool abort)
     state = 0;
 }
 
+void QDockWidgetPrivate::setResizerActive(bool active)
+{
+    Q_Q(QDockWidget);
+    if (active && !resizer) {
+        resizer = new QWidgetResizeHandler(q);
+        resizer->setMovingEnabled(false);
+    }
+    if (resizer)
+        resizer->setActive(QWidgetResizeHandler::Resize, active);
+}
+
 bool QDockWidgetPrivate::isAnimating() const
 {
     Q_Q(const QDockWidget);
@@ -1052,7 +1050,7 @@ void QDockWidgetPrivate::setWindowState(bool floating, bool unplug, const QRect
         }
     }
 
-    resizer->setActive(QWidgetResizeHandler::Resize, !unplug && floating && !nativeDeco);
+    setResizerActive(!unplug && floating && !nativeDeco);
 }
 
 /*!
diff --git a/src/widgets/widgets/qdockwidget.h b/src/widgets/widgets/qdockwidget.h
index ecf8c67e45..70ee2a4dcb 100644
--- a/src/widgets/widgets/qdockwidget.h
+++ b/src/widgets/widgets/qdockwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qdockwidget_p.h b/src/widgets/widgets/qdockwidget_p.h
index f7cd8c0039..7d75b4859c 100644
--- a/src/widgets/widgets/qdockwidget_p.h
+++ b/src/widgets/widgets/qdockwidget_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -88,7 +80,7 @@ public:
           features(QDockWidget::DockWidgetClosable
                    | QDockWidget::DockWidgetMovable
                    | QDockWidget::DockWidgetFloatable),
-          allowedAreas(Qt::AllDockWidgetAreas)
+          allowedAreas(Qt::AllDockWidgetAreas), resizer(0)
     { }
 
     void init();
@@ -101,8 +93,6 @@ public:
     QDockWidget::DockWidgetFeatures features;
     Qt::DockWidgetAreas allowedAreas;
 
-    QWidgetResizeHandler *resizer;
-
 #ifndef QT_NO_ACTION
     QAction *toggleViewAction;
 #endif
@@ -124,8 +114,12 @@ public:
 
     void unplug(const QRect &rect);
     void plug(const QRect &rect);
+    void setResizerActive(bool active);
 
     bool isAnimating() const;
+
+private:
+    QWidgetResizeHandler *resizer;
 };
 
 class Q_WIDGETS_EXPORT QDockWidgetLayout : public QLayout
diff --git a/src/widgets/widgets/qeffects.cpp b/src/widgets/widgets/qeffects.cpp
index cd8ae81ace..33fa772d83 100644
--- a/src/widgets/widgets/qeffects.cpp
+++ b/src/widgets/widgets/qeffects.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qeffects_p.h b/src/widgets/widgets/qeffects_p.h
index a96a60a956..5827180198 100644
--- a/src/widgets/widgets/qeffects_p.h
+++ b/src/widgets/widgets/qeffects_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qfocusframe.cpp b/src/widgets/widgets/qfocusframe.cpp
index 70b335bfb1..1439351909 100644
--- a/src/widgets/widgets/qfocusframe.cpp
+++ b/src/widgets/widgets/qfocusframe.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qfocusframe.h b/src/widgets/widgets/qfocusframe.h
index e1b0004ffc..d84f286bb6 100644
--- a/src/widgets/widgets/qfocusframe.h
+++ b/src/widgets/widgets/qfocusframe.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qfontcombobox.cpp b/src/widgets/widgets/qfontcombobox.cpp
index bdf5092d9e..4e3b57bd02 100644
--- a/src/widgets/widgets/qfontcombobox.cpp
+++ b/src/widgets/widgets/qfontcombobox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qfontcombobox.h b/src/widgets/widgets/qfontcombobox.h
index 8b3170eb5b..95bedc7009 100644
--- a/src/widgets/widgets/qfontcombobox.h
+++ b/src/widgets/widgets/qfontcombobox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qframe.cpp b/src/widgets/widgets/qframe.cpp
index b7ef2ed3b1..57cd51396c 100644
--- a/src/widgets/widgets/qframe.cpp
+++ b/src/widgets/widgets/qframe.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -369,7 +361,7 @@ int QFrame::midLineWidth() const
 void QFramePrivate::updateStyledFrameWidths()
 {
     Q_Q(const QFrame);
-    QStyleOptionFrameV3 opt;
+    QStyleOptionFrame opt;
     opt.initFrom(q);
     opt.lineWidth = lineWidth;
     opt.midLineWidth = midLineWidth;
@@ -481,7 +473,7 @@ void QFrame::paintEvent(QPaintEvent *)
 void QFrame::drawFrame(QPainter *p)
 {
     Q_D(QFrame);
-    QStyleOptionFrameV3 opt;
+    QStyleOptionFrame opt;
     opt.init(this);
     int frameShape  = d->frameStyle & QFrame::Shape_Mask;
     int frameShadow = d->frameStyle & QFrame::Shadow_Mask;
diff --git a/src/widgets/widgets/qframe.h b/src/widgets/widgets/qframe.h
index f121c0d725..ff04d70afc 100644
--- a/src/widgets/widgets/qframe.h
+++ b/src/widgets/widgets/qframe.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qframe_p.h b/src/widgets/widgets/qframe_p.h
index 377f6f942e..439347a3fb 100644
--- a/src/widgets/widgets/qframe_p.h
+++ b/src/widgets/widgets/qframe_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qgroupbox.cpp b/src/widgets/widgets/qgroupbox.cpp
index 168f0bbd67..ab459dea48 100644
--- a/src/widgets/widgets/qgroupbox.cpp
+++ b/src/widgets/widgets/qgroupbox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -111,7 +103,7 @@ void QGroupBox::initStyleOption(QStyleOptionGroupBox *option) const
         option->state &= ~QStyle::State_MouseOver;
 
     if (d->flat)
-        option->features |= QStyleOptionFrameV2::Flat;
+        option->features |= QStyleOptionFrame::Flat;
 
     if (d->checkable) {
         option->subControls |= QStyle::SC_GroupBoxCheckBox;
@@ -405,6 +397,8 @@ void QGroupBox::childEvent(QChildEvent *c)
     if (c->type() != QEvent::ChildAdded || !c->child()->isWidgetType())
         return;
     QWidget *w = (QWidget*)c->child();
+    if (w->isWindow())
+        return;
     if (d->checkable) {
         if (d->checked) {
             if (!w->testAttribute(Qt::WA_ForceDisabled))
diff --git a/src/widgets/widgets/qgroupbox.h b/src/widgets/widgets/qgroupbox.h
index 6c18cf8c0f..ca5a95e79e 100644
--- a/src/widgets/widgets/qgroupbox.h
+++ b/src/widgets/widgets/qgroupbox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qkeysequenceedit.cpp b/src/widgets/widgets/qkeysequenceedit.cpp
index c056967cf7..e5ccc71429 100644
--- a/src/widgets/widgets/qkeysequenceedit.cpp
+++ b/src/widgets/widgets/qkeysequenceedit.cpp
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Ivan Komissarov.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qkeysequenceedit.h b/src/widgets/widgets/qkeysequenceedit.h
index 7eeff4e504..94c83e1f14 100644
--- a/src/widgets/widgets/qkeysequenceedit.h
+++ b/src/widgets/widgets/qkeysequenceedit.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Ivan Komissarov.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qkeysequenceedit_p.h b/src/widgets/widgets/qkeysequenceedit_p.h
index adb3dc7a55..182692d091 100644
--- a/src/widgets/widgets/qkeysequenceedit_p.h
+++ b/src/widgets/widgets/qkeysequenceedit_p.h
@@ -1,41 +1,33 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Copyright (C) 2013 Ivan Komissarov.
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qlabel.cpp b/src/widgets/widgets/qlabel.cpp
index 919d7090e0..249b685d07 100644
--- a/src/widgets/widgets/qlabel.cpp
+++ b/src/widgets/widgets/qlabel.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qlabel.h b/src/widgets/widgets/qlabel.h
index 8edb099560..a1e9543187 100644
--- a/src/widgets/widgets/qlabel.h
+++ b/src/widgets/widgets/qlabel.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qlabel_p.h b/src/widgets/widgets/qlabel_p.h
index a82ae0653b..d601ff7888 100644
--- a/src/widgets/widgets/qlabel_p.h
+++ b/src/widgets/widgets/qlabel_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qlcdnumber.cpp b/src/widgets/widgets/qlcdnumber.cpp
index 11a456bc47..34230d6b04 100644
--- a/src/widgets/widgets/qlcdnumber.cpp
+++ b/src/widgets/widgets/qlcdnumber.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qlcdnumber.h b/src/widgets/widgets/qlcdnumber.h
index ba7b2d8494..0c3a4d6cf5 100644
--- a/src/widgets/widgets/qlcdnumber.h
+++ b/src/widgets/widgets/qlcdnumber.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qlineedit.cpp b/src/widgets/widgets/qlineedit.cpp
index ba4dbcc878..dfc9a8fe92 100644
--- a/src/widgets/widgets/qlineedit.cpp
+++ b/src/widgets/widgets/qlineedit.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -95,10 +87,8 @@ extern void qt_mac_secure_keyboard(bool); //qapplication_mac.cpp
 
 /*!
     Initialize \a option with the values from this QLineEdit. This method
-    is useful for subclasses when they need a QStyleOptionFrame or QStyleOptionFrameV2, but don't want
-    to fill in all the information themselves. This function will check the version
-    of the QStyleOptionFrame and fill in the additional values for a
-    QStyleOptionFrameV2.
+    is useful for subclasses when they need a QStyleOptionFrame, but don't want
+    to fill in all the information themselves.
 
     \sa QStyleOption::initFrom()
 */
@@ -703,7 +693,7 @@ QSize QLineEdit::sizeHint() const
     int w = fm.width(QLatin1Char('x')) * 17 + 2*d->horizontalMargin
             + d->effectiveLeftTextMargin() + d->effectiveRightTextMargin()
             + d->leftmargin + d->rightmargin; // "some"
-    QStyleOptionFrameV2 opt;
+    QStyleOptionFrame opt;
     initStyleOption(&opt);
     return (style()->sizeFromContents(QStyle::CT_LineEdit, &opt, QSize(w, h).
                                       expandedTo(QApplication::globalStrut()), this));
@@ -724,7 +714,7 @@ QSize QLineEdit::minimumSizeHint() const
     int h = fm.height() + qMax(2*d->verticalMargin, fm.leading())
             + d->topmargin + d->bottommargin;
     int w = fm.maxWidth() + d->leftmargin + d->rightmargin;
-    QStyleOptionFrameV2 opt;
+    QStyleOptionFrame opt;
     initStyleOption(&opt);
     return (style()->sizeFromContents(QStyle::CT_LineEdit, &opt, QSize(w, h).
                                       expandedTo(QApplication::globalStrut()), this));
@@ -1003,7 +993,7 @@ void QLineEdit::setSelection(int start, int length)
     d->control->setSelection(start, length);
 
     if (d->control->hasSelectedText()){
-        QStyleOptionFrameV2 opt;
+        QStyleOptionFrame opt;
         initStyleOption(&opt);
         if (!style()->styleHint(QStyle::SH_BlinkCursorWhenTextSelected, &opt, this))
             d->setCursorVisible(false);
@@ -1348,6 +1338,8 @@ void QLineEdit::setReadOnly(bool enable)
 #ifndef QT_NO_CURSOR
         setCursor(enable ? Qt::ArrowCursor : Qt::IBeamCursor);
 #endif
+        QEvent event(QEvent::ReadOnlyChange);
+        QCoreApplication::sendEvent(this, &event);
         update();
     }
 }
@@ -1439,7 +1431,7 @@ bool QLineEdit::event(QEvent * e)
         //In order to get the cursor blinking if QComboBox::setEditable is called when the combobox has focus
         if (hasFocus()) {
             d->control->setCursorBlinkPeriod(QApplication::cursorFlashTime());
-            QStyleOptionFrameV2 opt;
+            QStyleOptionFrame opt;
             initStyleOption(&opt);
             if ((!hasSelectedText() && d->control->preeditAreaText().isEmpty())
                 || style()->styleHint(QStyle::SH_BlinkCursorWhenTextSelected, &opt, this))
@@ -1801,7 +1793,7 @@ void QLineEdit::focusInEvent(QFocusEvent *e)
     if (!QApplication::keypadNavigationEnabled() || (hasEditFocus() && ( e->reason() == Qt::PopupFocusReason))) {
 #endif
     d->control->setCursorBlinkPeriod(QApplication::cursorFlashTime());
-    QStyleOptionFrameV2 opt;
+    QStyleOptionFrame opt;
     initStyleOption(&opt);
     if((!hasSelectedText() && d->control->preeditAreaText().isEmpty())
        || style()->styleHint(QStyle::SH_BlinkCursorWhenTextSelected, &opt, this))
@@ -1875,14 +1867,12 @@ void QLineEdit::paintEvent(QPaintEvent *)
 {
     Q_D(QLineEdit);
     QPainter p(this);
-
-    QRect r = rect();
     QPalette pal = palette();
 
-    QStyleOptionFrameV2 panel;
+    QStyleOptionFrame panel;
     initStyleOption(&panel);
     style()->drawPrimitive(QStyle::PE_PanelLineEdit, &panel, &p, this);
-    r = style()->subElementRect(QStyle::SE_LineEditContents, &panel, this);
+    QRect r = style()->subElementRect(QStyle::SE_LineEditContents, &panel, this);
     r.setX(r.x() + d->effectiveLeftTextMargin());
     r.setY(r.y() + d->topTextMargin);
     r.setRight(r.right() - d->effectiveRightTextMargin());
@@ -2185,9 +2175,10 @@ void QLineEdit::changeEvent(QEvent *ev)
         break;
     case QEvent::StyleChange:
         {
-            QStyleOptionFrameV2 opt;
+            QStyleOptionFrame opt;
             initStyleOption(&opt);
             d->control->setPasswordCharacter(style()->styleHint(QStyle::SH_LineEdit_PasswordCharacter, &opt, this));
+            d->control->setPasswordMaskDelay(style()->styleHint(QStyle::SH_LineEdit_PasswordMaskDelay, &opt, this));
         }
         d->m_iconSize = QSize();
         update();
diff --git a/src/widgets/widgets/qlineedit.h b/src/widgets/widgets/qlineedit.h
index 3d52863db2..3997ed16fd 100644
--- a/src/widgets/widgets/qlineedit.h
+++ b/src/widgets/widgets/qlineedit.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -261,6 +253,7 @@ private:
     Q_PRIVATE_SLOT(d_func(), void _q_selectionChanged())
     Q_PRIVATE_SLOT(d_func(), void _q_updateNeeded(const QRect &))
     Q_PRIVATE_SLOT(d_func(), void _q_textChanged(const QString &))
+    Q_PRIVATE_SLOT(d_func(), void _q_clearButtonClicked())
 };
 
 #endif // QT_NO_LINEEDIT
diff --git a/src/widgets/widgets/qlineedit_p.cpp b/src/widgets/widgets/qlineedit_p.cpp
index a4394ae92b..0731c89094 100644
--- a/src/widgets/widgets/qlineedit_p.cpp
+++ b/src/widgets/widgets/qlineedit_p.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -143,7 +135,7 @@ void QLineEditPrivate::_q_selectionChanged()
 {
     Q_Q(QLineEdit);
     if (control->preeditAreaText().isEmpty()) {
-        QStyleOptionFrameV2 opt;
+        QStyleOptionFrame opt;
         q->initStyleOption(&opt);
         bool showCursor = control->hasSelectedText() ?
                           q->style()->styleHint(QStyle::SH_BlinkCursorWhenTextSelected, &opt, q):
@@ -202,9 +194,10 @@ void QLineEditPrivate::init(const QString& txt)
     QObject::connect(control, SIGNAL(updateNeeded(QRect)),
             q, SLOT(_q_updateNeeded(QRect)));
 
-    QStyleOptionFrameV2 opt;
+    QStyleOptionFrame opt;
     q->initStyleOption(&opt);
     control->setPasswordCharacter(q->style()->styleHint(QStyle::SH_LineEdit_PasswordCharacter, &opt, q));
+    control->setPasswordMaskDelay(q->style()->styleHint(QStyle::SH_LineEdit_PasswordMaskDelay, &opt, q));
 #ifndef QT_NO_CURSOR
     q->setCursor(Qt::IBeamCursor);
 #endif
@@ -224,7 +217,7 @@ void QLineEditPrivate::init(const QString& txt)
 QRect QLineEditPrivate::adjustedContentsRect() const
 {
     Q_Q(const QLineEdit);
-    QStyleOptionFrameV2 opt;
+    QStyleOptionFrame opt;
     q->initStyleOption(&opt);
     QRect r = q->style()->subElementRect(QStyle::SE_LineEditContents, &opt, q);
     r.setX(r.x() + effectiveLeftTextMargin());
@@ -322,7 +315,7 @@ void QLineEditIconButton::paintEvent(QPaintEvent *)
         state = isDown() ? QIcon::Selected : QIcon::Normal;
     const QPixmap iconPixmap = icon().pixmap(QSize(IconButtonSize, IconButtonSize),
                                              state, QIcon::Off);
-    QRect pixmapRect = QRect(0, 0, iconPixmap.width(), iconPixmap.height());
+    QRect pixmapRect = QRect(QPoint(0, 0), iconPixmap.size() / iconPixmap.devicePixelRatio());
     pixmapRect.moveCenter(rect().center());
     painter.setOpacity(m_opacity);
     painter.drawPixmap(pixmapRect, iconPixmap);
@@ -375,6 +368,15 @@ void QLineEditPrivate::_q_textChanged(const QString &text)
     }
 }
 
+void QLineEditPrivate::_q_clearButtonClicked()
+{
+    Q_Q(QLineEdit);
+    if (!q->text().isEmpty()) {
+        q->clear();
+        emit q->textEdited(QString());
+    }
+}
+
 QSize QLineEditPrivate::iconSize() const
 {
     if (!m_iconSize.isValid()) // This might require style-specific handling (pixel metric).
@@ -385,7 +387,7 @@ QSize QLineEditPrivate::iconSize() const
 QIcon QLineEditPrivate::clearButtonIcon() const
 {
     Q_Q(const QLineEdit);
-    QStyleOptionFrameV2 styleOption;
+    QStyleOptionFrame styleOption;
     q->initStyleOption(&styleOption);
     return QIcon(q->style()->standardPixmap(QStyle::SP_LineEditClearButton, &styleOption, q));
 }
@@ -450,7 +452,7 @@ QWidget *QLineEditPrivate::addAction(QAction *newAction, QAction *before, QLineE
         toolButton->setIcon(newAction->icon());
         toolButton->setOpacity(lastTextSize > 0 || !(flags & SideWidgetFadeInWithText) ? 1 : 0);
         if (flags & SideWidgetClearButton)
-            QObject::connect(toolButton, SIGNAL(clicked()), q, SLOT(clear()));
+            QObject::connect(toolButton, SIGNAL(clicked()), q, SLOT(_q_clearButtonClicked()));
         toolButton->setDefaultAction(newAction);
         w = toolButton;
     }
diff --git a/src/widgets/widgets/qlineedit_p.h b/src/widgets/widgets/qlineedit_p.h
index 7749d9902a..6426329de6 100644
--- a/src/widgets/widgets/qlineedit_p.h
+++ b/src/widgets/widgets/qlineedit_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -199,6 +191,7 @@ public:
     void drag();
 #endif
     void _q_textChanged(const QString &);
+    void _q_clearButtonClicked();
 
     int leftTextMargin; // use effectiveLeftTextMargin() in case of icon.
     int topTextMargin;
diff --git a/src/widgets/widgets/qmaccocoaviewcontainer_mac.h b/src/widgets/widgets/qmaccocoaviewcontainer_mac.h
index 31172cb6bb..a98d30f0ef 100644
--- a/src/widgets/widgets/qmaccocoaviewcontainer_mac.h
+++ b/src/widgets/widgets/qmaccocoaviewcontainer_mac.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmacnativewidget_mac.h b/src/widgets/widgets/qmacnativewidget_mac.h
index dd433a4ee3..9d3b4ec239 100644
--- a/src/widgets/widgets/qmacnativewidget_mac.h
+++ b/src/widgets/widgets/qmacnativewidget_mac.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmainwindow.cpp b/src/widgets/widgets/qmainwindow.cpp
index 36ca90ba00..f9376a78d5 100644
--- a/src/widgets/widgets/qmainwindow.cpp
+++ b/src/widgets/widgets/qmainwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -468,6 +460,10 @@ void QMainWindow::setIconSize(const QSize &iconSize)
 /*! \property QMainWindow::toolButtonStyle
     \brief style of toolbar buttons in this mainwindow.
 
+    To have the style of toolbuttons follow the system settings, set this property to Qt::ToolButtonFollowStyle.
+    On Unix, the user settings from the desktop environment will be used.
+    On other platforms, Qt::ToolButtonFollowStyle means icon only.
+
     The default is Qt::ToolButtonIconOnly.
 */
 
diff --git a/src/widgets/widgets/qmainwindow.h b/src/widgets/widgets/qmainwindow.h
index 8411bf9f6b..4478c47449 100644
--- a/src/widgets/widgets/qmainwindow.h
+++ b/src/widgets/widgets/qmainwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -155,7 +147,6 @@ public:
     void removeToolBar(QToolBar *toolbar);
     void removeToolBarBreak(QToolBar *before);
 
-    void setUnifiedTitleAndToolBarOnMac(bool set);
     bool unifiedTitleAndToolBarOnMac() const;
 
     Qt::ToolBarArea toolBarArea(QToolBar *toolbar) const;
@@ -182,12 +173,14 @@ public:
     virtual QMenu *createPopupMenu();
 #endif
 
-
-#ifndef QT_NO_DOCKWIDGET
 public Q_SLOTS:
+#ifndef QT_NO_DOCKWIDGET
     void setAnimated(bool enabled);
     void setDockNestingEnabled(bool enabled);
 #endif
+#ifndef QT_NO_TOOLBAR
+    void setUnifiedTitleAndToolBarOnMac(bool set);
+#endif
 
 Q_SIGNALS:
     void iconSizeChanged(const QSize &iconSize);
diff --git a/src/widgets/widgets/qmainwindowlayout.cpp b/src/widgets/widgets/qmainwindowlayout.cpp
index c026b79103..43f168ecd8 100644
--- a/src/widgets/widgets/qmainwindowlayout.cpp
+++ b/src/widgets/widgets/qmainwindowlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -62,7 +54,10 @@
 #include <qmap.h>
 #include <qtimer.h>
 
-#include <qdebug.h>
+#ifndef QT_NO_DEBUG_STREAM
+#  include <qdebug.h>
+#  include <qtextstream.h>
+#endif
 
 #include <private/qapplication_p.h>
 #include <private/qlayoutengine_p.h>
@@ -71,23 +66,17 @@
 #   include <private/qt_cocoa_helpers_mac_p.h>
 #endif
 
-#ifdef QT_NO_DOCKWIDGET
-extern QMainWindowLayout *qt_mainwindow_layout(const QMainWindow *window);
-#endif
+QT_BEGIN_NAMESPACE
 
-#ifdef Q_DEBUG_MAINWINDOW_LAYOUT
-#   include <QTextStream>
+#ifndef QT_NO_DOCKWIDGET
+extern QMainWindowLayout *qt_mainwindow_layout(const QMainWindow *window);
 #endif
 
-QT_BEGIN_NAMESPACE
-
 /******************************************************************************
 ** debug
 */
 
-#if defined(Q_DEBUG_MAINWINDOW_LAYOUT) && !defined(QT_NO_DOCKWIDGET)
-
-static QTextStream qout(stderr, QIODevice::WriteOnly);
+#if !defined(QT_NO_DOCKWIDGET) && !defined(QT_NO_DEBUG_STREAM)
 
 static void dumpLayout(QTextStream &qout, const QDockAreaLayoutInfo &layout, QString indent);
 
@@ -101,7 +90,7 @@ static void dumpLayout(QTextStream &qout, const QDockAreaLayoutItem &item, QStri
     if (item.widgetItem != 0) {
         qout << indent << "widget: "
             << item.widgetItem->widget()->metaObject()->className()
-            << ' ' << item.widgetItem->widget()->windowTitle() << '\n';
+            << " \"" << item.widgetItem->widget()->windowTitle() << "\"\n";
     } else if (item.subinfo != 0) {
         qout << indent << "subinfo:\n";
         dumpLayout(qout, *item.subinfo, indent + QLatin1String("  "));
@@ -117,16 +106,17 @@ static void dumpLayout(QTextStream &qout, const QDockAreaLayoutItem &item, QStri
             << " rect:" << r.x() << ',' << r.y() << ' '
             << r.width() << 'x' << r.height() << '\n';
     }
-    qout.flush();
 }
 
 static void dumpLayout(QTextStream &qout, const QDockAreaLayoutInfo &layout, QString indent)
 {
+    const QSize minSize = layout.minimumSize();
     qout << indent << "QDockAreaLayoutInfo: "
             << layout.rect.left() << ','
             << layout.rect.top() << ' '
             << layout.rect.width() << 'x'
             << layout.rect.height()
+            << " min size: " << minSize.width() << ',' << minSize.height()
             << " orient:" << layout.o
             << " tabbed:" << layout.tabbed
             << " tbshape:" << layout.tabBarShape << '\n';
@@ -137,36 +127,42 @@ static void dumpLayout(QTextStream &qout, const QDockAreaLayoutInfo &layout, QSt
         qout << indent << "Item: " << i << '\n';
         dumpLayout(qout, layout.item_list.at(i), indent + QLatin1String("  "));
     }
-    qout.flush();
-};
+}
 
-static void dumpLayout(QTextStream &qout, const QDockAreaLayout &layout, QString indent)
+static void dumpLayout(QTextStream &qout, const QDockAreaLayout &layout)
 {
-    qout << indent << "QDockAreaLayout: "
+    qout << "QDockAreaLayout: "
             << layout.rect.left() << ','
             << layout.rect.top() << ' '
             << layout.rect.width() << 'x'
             << layout.rect.height() << '\n';
 
-    qout << indent << "TopDockArea:\n";
-    dumpLayout(qout, layout.docks[QInternal::TopDock], indent + QLatin1String("  "));
-    qout << indent << "LeftDockArea:\n";
-    dumpLayout(qout, layout.docks[QInternal::LeftDock], indent + QLatin1String("  "));
-    qout << indent << "RightDockArea:\n";
-    dumpLayout(qout, layout.docks[QInternal::RightDock], indent + QLatin1String("  "));
-    qout << indent << "BottomDockArea:\n";
-    dumpLayout(qout, layout.docks[QInternal::BottomDock], indent + QLatin1String("  "));
+    qout << "TopDockArea:\n";
+    dumpLayout(qout, layout.docks[QInternal::TopDock], QLatin1String("  "));
+    qout << "LeftDockArea:\n";
+    dumpLayout(qout, layout.docks[QInternal::LeftDock], QLatin1String("  "));
+    qout << "RightDockArea:\n";
+    dumpLayout(qout, layout.docks[QInternal::RightDock], QLatin1String("  "));
+    qout << "BottomDockArea:\n";
+    dumpLayout(qout, layout.docks[QInternal::BottomDock], QLatin1String("  "));
+}
 
-    qout.flush();
-};
+QDebug operator<<(QDebug debug, const QDockAreaLayout &layout)
+{
+    QString s;
+    QTextStream str(&s);
+    dumpLayout(str, layout);
+    debug << s;
+    return debug;
+}
 
-void qt_dumpLayout(QTextStream &qout, QMainWindow *window)
+QDebug operator<<(QDebug debug, const QMainWindowLayout *layout)
 {
-    QMainWindowLayout *layout = qt_mainwindow_layout(window);
-    dumpLayout(qout, layout->layoutState.dockAreaLayout, QString());
+    debug << layout->layoutState.dockAreaLayout;
+    return debug;
 }
 
-#endif // Q_DEBUG_MAINWINDOW_LAYOUT && !QT_NO_DOCKWIDGET
+#endif // !defined(QT_NO_DOCKWIDGET) && !defined(QT_NO_DEBUG)
 
 /******************************************************************************
 ** QMainWindowLayoutState
diff --git a/src/widgets/widgets/qmainwindowlayout_p.h b/src/widgets/widgets/qmainwindowlayout_p.h
index f866a554dc..abec34af14 100644
--- a/src/widgets/widgets/qmainwindowlayout_p.h
+++ b/src/widgets/widgets/qmainwindowlayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,15 +60,6 @@
 #include "qdockarealayout_p.h"
 #include "qtoolbararealayout_p.h"
 
-//#define Q_DEBUG_MAINWINDOW_LAYOUT
-
-#if defined(Q_DEBUG_MAINWINDOW_LAYOUT) && !defined(QT_NO_DOCKWIDGET)
-QT_BEGIN_NAMESPACE
-class QTextStream;
-Q_WIDGETS_EXPORT void qt_dumpLayout(QTextStream &qout, QMainWindow *window);
-QT_END_NAMESPACE
-#endif // Q_DEBUG_MAINWINDOW_LAYOUT && !QT_NO_DOCKWIDGET
-
 #ifdef Q_WS_MAC
 // Forward defs to make avoid including Carbon.h (faster compile you know ;).
 struct OpaqueHIObjectRef;
@@ -344,6 +327,13 @@ public:
 
 #endif // Q_WS_MAC
 };
+
+#if !defined(QT_NO_DOCKWIDGET) && !defined(QT_NO_DEBUG_STREAM)
+class QDebug;
+QDebug operator<<(QDebug debug, const QDockAreaLayout &layout);
+QDebug operator<<(QDebug debug, const QMainWindowLayout *layout);
+#endif
+
 QT_END_NAMESPACE
 
 #endif // QT_NO_MAINWINDOW
diff --git a/src/widgets/widgets/qmdiarea.cpp b/src/widgets/widgets/qmdiarea.cpp
index 17f73b2809..431e67e7a8 100644
--- a/src/widgets/widgets/qmdiarea.cpp
+++ b/src/widgets/widgets/qmdiarea.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -169,7 +161,7 @@
 #include <QResizeEvent>
 #include <QScrollBar>
 #include <QtAlgorithms>
-#include <QMutableListIterator>
+#include <QMutableVectorIterator>
 #include <QPainter>
 #include <QFontMetrics>
 #include <QStyleOption>
@@ -355,7 +347,8 @@ void SimpleCascader::rearrange(QList<QWidget *> &widgets, const QRect &domain) c
     options.initFrom(widgets.at(0));
     int titleBarHeight = widgets.at(0)->style()->pixelMetric(QStyle::PM_TitleBarHeight, &options, widgets.at(0));
     const QFontMetrics fontMetrics = QFontMetrics(QApplication::font("QMdiSubWindowTitleBar"));
-    const int dy = qMax(titleBarHeight - (titleBarHeight - fontMetrics.height()) / 2, 1);
+    const int dy = qMax(titleBarHeight - (titleBarHeight - fontMetrics.height()) / 2, 1)
+        + widgets.at(0)->style()->pixelMetric(QStyle::PM_FocusFrameVMargin, 0, widgets.at(0));
 
     const int n = widgets.size();
     const int nrows = qMax((domain.height() - (topOffset + bottomOffset)) / dy, 1);
@@ -413,7 +406,7 @@ void IconTiler::rearrange(QList<QWidget *> &widgets, const QRect &domain) const
     \internal
     Calculates the accumulated overlap (intersection area) between 'source' and 'rects'.
 */
-int MinOverlapPlacer::accumulatedOverlap(const QRect &source, const QList<QRect> &rects)
+int MinOverlapPlacer::accumulatedOverlap(const QRect &source, const QVector<QRect> &rects)
 {
     int accOverlap = 0;
     foreach (const QRect &rect, rects) {
@@ -429,7 +422,7 @@ int MinOverlapPlacer::accumulatedOverlap(const QRect &source, const QList<QRect>
     Finds among 'source' the rectangle with the minimum accumulated overlap with the
     rectangles in 'rects'.
 */
-QRect MinOverlapPlacer::findMinOverlapRect(const QList<QRect> &source, const QList<QRect> &rects)
+QRect MinOverlapPlacer::findMinOverlapRect(const QVector<QRect> &source, const QVector<QRect> &rects)
 {
     int minAccOverlap = -1;
     QRect minAccOverlapRect;
@@ -447,28 +440,37 @@ QRect MinOverlapPlacer::findMinOverlapRect(const QList<QRect> &source, const QLi
     \internal
     Gets candidates for the final placement.
 */
-void MinOverlapPlacer::getCandidatePlacements(const QSize &size, const QList<QRect> &rects,
-                                              const QRect &domain,QList<QRect> &candidates)
+QVector<QRect> MinOverlapPlacer::getCandidatePlacements(const QSize &size, const QVector<QRect> &rects,
+                                                        const QRect &domain)
 {
-    QSet<int> xset;
-    QSet<int> yset;
-    xset << domain.left() << domain.right() - size.width() + 1;
-    yset << domain.top();
+    QVector<QRect> result;
+
+    QVector<int> xlist;
+    xlist.reserve(2 + rects.size());
+    xlist << domain.left() << domain.right() - size.width() + 1;
+
+    QVector<int> ylist;
+    ylist.reserve(2 + rects.size());
+    ylist << domain.top();
     if (domain.bottom() - size.height() + 1 >= 0)
-        yset << domain.bottom() - size.height() + 1;
+        ylist << domain.bottom() - size.height() + 1;
+
     foreach (const QRect &rect, rects) {
-        xset << rect.right() + 1;
-        yset << rect.bottom() + 1;
+        xlist << rect.right() + 1;
+        ylist << rect.bottom() + 1;
     }
 
-    QList<int> xlist = xset.values();
     std::sort(xlist.begin(), xlist.end());
-    QList<int> ylist = yset.values();
+    xlist.erase(std::unique(xlist.begin(), xlist.end()), xlist.end());
+
     std::sort(ylist.begin(), ylist.end());
+    ylist.erase(std::unique(ylist.begin(), ylist.end()), ylist.end());
 
+    result.reserve(ylist.size() * xlist.size());
     foreach (int y, ylist)
         foreach (int x, xlist)
-            candidates << QRect(QPoint(x, y), size);
+            result << QRect(QPoint(x, y), size);
+    return result;
 }
 
 /*!
@@ -476,10 +478,12 @@ void MinOverlapPlacer::getCandidatePlacements(const QSize &size, const QList<QRe
     Finds all rectangles in 'source' not completely inside 'domain'. The result is stored
     in 'result' and also removed from 'source'.
 */
-void MinOverlapPlacer::findNonInsiders(const QRect &domain, QList<QRect> &source,
-                                       QList<QRect> &result)
+QVector<QRect> MinOverlapPlacer::findNonInsiders(const QRect &domain, QVector<QRect> &source)
 {
-    QMutableListIterator<QRect> it(source);
+    QVector<QRect> result;
+    result.reserve(source.size());
+
+    QMutableVectorIterator<QRect> it(source);
     while (it.hasNext()) {
         const QRect srcRect = it.next();
         if (!domain.contains(srcRect)) {
@@ -487,6 +491,8 @@ void MinOverlapPlacer::findNonInsiders(const QRect &domain, QList<QRect> &source
             it.remove();
         }
     }
+
+    return result;
 }
 
 /*!
@@ -494,9 +500,11 @@ void MinOverlapPlacer::findNonInsiders(const QRect &domain, QList<QRect> &source
     Finds all rectangles in 'source' that overlaps 'domain' by the maximum overlap area
     between 'domain' and any rectangle in 'source'. The result is stored in 'result'.
 */
-void MinOverlapPlacer::findMaxOverlappers(const QRect &domain, const QList<QRect> &source,
-                                          QList<QRect> &result)
+QVector<QRect> MinOverlapPlacer::findMaxOverlappers(const QRect &domain, const QVector<QRect> &source)
 {
+    QVector<QRect> result;
+    result.reserve(source.size());
+
     int maxOverlap = -1;
     foreach (const QRect &srcRect, source) {
         QRect intersection = domain.intersected(srcRect);
@@ -509,6 +517,8 @@ void MinOverlapPlacer::findMaxOverlappers(const QRect &domain, const QList<QRect
             result << srcRect;
         }
     }
+
+    return result;
 }
 
 /*!
@@ -517,17 +527,15 @@ void MinOverlapPlacer::findMaxOverlappers(const QRect &domain, const QList<QRect
     placement that overlaps the rectangles in 'rects' as little as possible while at the
     same time being as much as possible inside 'domain'.
 */
-QPoint MinOverlapPlacer::findBestPlacement(const QRect &domain, const QList<QRect> &rects,
-                                           QList<QRect> &source)
+QPoint MinOverlapPlacer::findBestPlacement(const QRect &domain, const QVector<QRect> &rects,
+                                           QVector<QRect> &source)
 {
-    QList<QRect> nonInsiders;
-    findNonInsiders(domain, source, nonInsiders);
+    const QVector<QRect> nonInsiders = findNonInsiders(domain, source);
 
     if (!source.empty())
         return findMinOverlapRect(source, rects).topLeft();
 
-    QList<QRect> maxOverlappers;
-    findMaxOverlappers(domain, nonInsiders, maxOverlappers);
+    QVector<QRect> maxOverlappers = findMaxOverlappers(domain, nonInsiders);
     return findMinOverlapRect(maxOverlappers, rects).topLeft();
 }
 
@@ -538,7 +546,7 @@ QPoint MinOverlapPlacer::findBestPlacement(const QRect &domain, const QList<QRec
     overlaps 'rects' as little as possible and 'domain' as much as possible.
     Returns the position of the resulting rectangle.
 */
-QPoint MinOverlapPlacer::place(const QSize &size, const QList<QRect> &rects,
+QPoint MinOverlapPlacer::place(const QSize &size, const QVector<QRect> &rects,
                                const QRect &domain) const
 {
     if (size.isEmpty() || !domain.isValid())
@@ -548,8 +556,7 @@ QPoint MinOverlapPlacer::place(const QSize &size, const QList<QRect> &rects,
             return QPoint();
     }
 
-    QList<QRect> candidates;
-    getCandidatePlacements(size, rects, domain, candidates);
+    QVector<QRect> candidates = getCandidatePlacements(size, rects, domain);
     return findBestPlacement(domain, rects, candidates);
 }
 
@@ -882,7 +889,8 @@ void QMdiAreaPrivate::place(Placer *placer, QMdiSubWindow *child)
         return;
     }
 
-    QList<QRect> rects;
+    QVector<QRect> rects;
+    rects.reserve(childWindows.size());
     QRect parentRect = q->rect();
     foreach (QMdiSubWindow *window, childWindows) {
         if (!sanityCheck(window, "QMdiArea::place") || window == child || !window->isVisibleTo(q)
diff --git a/src/widgets/widgets/qmdiarea.h b/src/widgets/widgets/qmdiarea.h
index 87ecd432dc..18d559e21b 100644
--- a/src/widgets/widgets/qmdiarea.h
+++ b/src/widgets/widgets/qmdiarea.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmdiarea_p.h b/src/widgets/widgets/qmdiarea_p.h
index 90db55438a..1092fd9a30 100644
--- a/src/widgets/widgets/qmdiarea_p.h
+++ b/src/widgets/widgets/qmdiarea_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -59,6 +51,7 @@
 #ifndef QT_NO_MDIAREA
 
 #include <QList>
+#include <QVector>
 #include <QRect>
 #include <QPoint>
 #include <QtWidgets/qapplication.h>
@@ -116,24 +109,19 @@ public:
     // Places the rectangle defined by 'size' relative to 'rects' and 'domain'.
     // Returns the position of the resulting rectangle.
     virtual QPoint place(
-        const QSize &size, const QList<QRect> &rects, const QRect &domain) const = 0;
+        const QSize &size, const QVector<QRect> &rects, const QRect &domain) const = 0;
     virtual ~Placer() {}
 };
 
 class MinOverlapPlacer : public Placer
 {
-    QPoint place(const QSize &size, const QList<QRect> &rects, const QRect &domain) const;
-    static int accumulatedOverlap(const QRect &source, const QList<QRect> &rects);
-    static QRect findMinOverlapRect(const QList<QRect> &source, const QList<QRect> &rects);
-    static void getCandidatePlacements(
-        const QSize &size, const QList<QRect> &rects, const QRect &domain,
-        QList<QRect> &candidates);
-    static QPoint findBestPlacement(
-        const QRect &domain, const QList<QRect> &rects, QList<QRect> &source);
-    static void findNonInsiders(
-        const QRect &domain, QList<QRect> &source, QList<QRect> &result);
-    static void findMaxOverlappers(
-        const QRect &domain, const QList<QRect> &source, QList<QRect> &result);
+    QPoint place(const QSize &size, const QVector<QRect> &rects, const QRect &domain) const;
+    static int accumulatedOverlap(const QRect &source, const QVector<QRect> &rects);
+    static QRect findMinOverlapRect(const QVector<QRect> &source, const QVector<QRect> &rects);
+    static QVector<QRect> getCandidatePlacements(const QSize &size, const QVector<QRect> &rects, const QRect &domain);
+    static QPoint findBestPlacement(const QRect &domain, const QVector<QRect> &rects, QVector<QRect> &source);
+    static QVector<QRect> findNonInsiders(const QRect &domain, QVector<QRect> &source);
+    static QVector<QRect> findMaxOverlappers(const QRect &domain, const QVector<QRect> &source);
 };
 } // namespace QMdi
 
diff --git a/src/widgets/widgets/qmdisubwindow.cpp b/src/widgets/widgets/qmdisubwindow.cpp
index 9104074122..2340c8fe4b 100644
--- a/src/widgets/widgets/qmdisubwindow.cpp
+++ b/src/widgets/widgets/qmdisubwindow.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1043,6 +1035,7 @@ void QMdiSubWindowPrivate::createSystemMenu()
     Q_ASSERT_X(q, "QMdiSubWindowPrivate::createSystemMenu",
                "You can NOT call this function before QMdiSubWindow's ctor");
     systemMenu = new QMenu(q);
+    systemMenu->installEventFilter(q);
     const QStyle *style = q->style();
     addToSystemMenu(RestoreAction, QMdiSubWindow::tr("&Restore"), SLOT(showNormal()));
     actions[RestoreAction]->setIcon(style->standardIcon(QStyle::SP_TitleBarNormalButton, 0, q));
@@ -1321,6 +1314,14 @@ void QMdiSubWindowPrivate::setNormalMode()
     updateMask();
 }
 
+inline void QMdiSubWindowPrivate::storeFocusWidget()
+{
+    if (QWidget *focus = QApplication::focusWidget()) {
+        if (!restoreFocusWidget && q_func()->isAncestorOf(focus))
+            restoreFocusWidget = focus;
+    }
+}
+
 /*!
     \internal
 */
@@ -1333,8 +1334,7 @@ void QMdiSubWindowPrivate::setMaximizeMode()
     isShadeMode = false;
     isMaximizeMode = true;
 
-    if (!restoreFocusWidget && q->isAncestorOf(QApplication::focusWidget()))
-        restoreFocusWidget = QApplication::focusWidget();
+    storeFocusWidget();
 
 #ifndef QT_NO_SIZEGRIP
     setSizeGripVisible(false);
@@ -1436,6 +1436,7 @@ void QMdiSubWindowPrivate::setActive(bool activate, bool changeFocus)
         Qt::WindowStates oldWindowState = q->windowState();
         q->overrideWindowState(q->windowState() & ~Qt::WindowActive);
         if (changeFocus) {
+            storeFocusWidget();
             QWidget *focusWidget = QApplication::focusWidget();
             if (focusWidget && (focusWidget == q || q->isAncestorOf(focusWidget)))
                 focusWidget->clearFocus();
@@ -2026,6 +2027,9 @@ void QMdiSubWindowPrivate::setFocusWidget()
         return;
     }
 
+    if (!(q->windowState() & Qt::WindowMinimized) && restoreFocus())
+        return;
+
     if (QWidget *focusWidget = baseWidget->focusWidget()) {
         if (!focusWidget->hasFocus() && q->isAncestorOf(focusWidget)
                 && focusWidget->isVisible() && !q->isMinimized()
@@ -2048,16 +2052,19 @@ void QMdiSubWindowPrivate::setFocusWidget()
         q->setFocus();
 }
 
-void QMdiSubWindowPrivate::restoreFocus()
+bool QMdiSubWindowPrivate::restoreFocus()
 {
-    if (!restoreFocusWidget)
-        return;
-    if (!restoreFocusWidget->hasFocus() && q_func()->isAncestorOf(restoreFocusWidget)
-            && restoreFocusWidget->isVisible()
-            && restoreFocusWidget->focusPolicy() != Qt::NoFocus) {
-        restoreFocusWidget->setFocus();
+    if (restoreFocusWidget.isNull())
+        return false;
+    QWidget *candidate = restoreFocusWidget;
+    restoreFocusWidget.clear();
+    if (!candidate->hasFocus() && q_func()->isAncestorOf(candidate)
+        && candidate->isVisible()
+        && candidate->focusPolicy() != Qt::NoFocus) {
+        candidate->setFocus();
+        return true;
     }
-    restoreFocusWidget = 0;
+    return candidate->hasFocus();
 }
 
 /*!
@@ -2555,7 +2562,6 @@ void QMdiSubWindow::showSystemMenu()
     // Adjust x() with -menuwidth in reverse mode.
     if (isRightToLeft())
         globalPopupPos -= QPoint(d->systemMenu->sizeHint().width(), 0);
-    d->systemMenu->installEventFilter(this);
     d->systemMenu->popup(globalPopupPos);
 }
 #endif // QT_NO_MENU
@@ -2605,9 +2611,7 @@ void QMdiSubWindow::showShaded()
 
     d->isMaximizeMode = false;
 
-    QWidget *currentFocusWidget = QApplication::focusWidget();
-    if (!d->restoreFocusWidget && isAncestorOf(currentFocusWidget))
-        d->restoreFocusWidget = currentFocusWidget;
+    d->storeFocusWidget();
 
     if (!d->isShadeRequestFromMinimizeMode) {
         d->isShadeMode = true;
@@ -2621,7 +2625,7 @@ void QMdiSubWindow::showShaded()
     // showMinimized() will reset Qt::WindowActive, which makes sense
     // for top level widgets, but in MDI it makes sense to have an
     // active window which is minimized.
-    if (hasFocus() || isAncestorOf(currentFocusWidget))
+    if (hasFocus() || isAncestorOf(QApplication::focusWidget()))
         d->ensureWindowState(Qt::WindowActive);
 
 #ifndef QT_NO_SIZEGRIP
@@ -2690,7 +2694,6 @@ bool QMdiSubWindow::eventFilter(QObject *object, QEvent *event)
             QMouseEvent *mouseEvent = static_cast<QMouseEvent *>(event);
             d->hoveredSubControl = d->getSubControl(mapFromGlobal(mouseEvent->globalPos()));
         } else if (event->type() == QEvent::Hide) {
-            d->systemMenu->removeEventFilter(this);
             d->activeSubControl = QStyle::SC_None;
             update(QRegion(0, 0, width(), d->titleBarHeight()));
         }
diff --git a/src/widgets/widgets/qmdisubwindow.h b/src/widgets/widgets/qmdisubwindow.h
index 915fef758b..a94ecfb48e 100644
--- a/src/widgets/widgets/qmdisubwindow.h
+++ b/src/widgets/widgets/qmdisubwindow.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmdisubwindow_p.h b/src/widgets/widgets/qmdisubwindow_p.h
index 90369ff526..763f6ba039 100644
--- a/src/widgets/widgets/qmdisubwindow_p.h
+++ b/src/widgets/widgets/qmdisubwindow_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -266,7 +258,8 @@ public:
     QPalette desktopPalette() const;
     void updateActions();
     void setFocusWidget();
-    void restoreFocus();
+    bool restoreFocus();
+    void storeFocusWidget();
     void setWindowFlags(Qt::WindowFlags windowFlags);
     void setVisible(WindowStateAction, bool visible = true);
 #ifndef QT_NO_ACTION
diff --git a/src/widgets/widgets/qmenu.cpp b/src/widgets/widgets/qmenu.cpp
index 7e48badea5..f2aefe6ea9 100644
--- a/src/widgets/widgets/qmenu.cpp
+++ b/src/widgets/widgets/qmenu.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -187,8 +179,8 @@ void QMenuPrivate::syncPlatformMenu()
         QPlatformMenuItem *menuItem = platformMenu->createMenuItem();
         QAction *action = it.previous();
         menuItem->setTag(reinterpret_cast<quintptr>(action));
-        QObject::connect(menuItem, SIGNAL(activated()), action, SLOT(trigger()));
-        QObject::connect(menuItem, SIGNAL(hovered()), action, SIGNAL(hovered()));
+        QObject::connect(menuItem, SIGNAL(activated()), action, SLOT(trigger()), Qt::QueuedConnection);
+        QObject::connect(menuItem, SIGNAL(hovered()), action, SIGNAL(hovered()), Qt::QueuedConnection);
         copyActionToPlatformItem(action, menuItem);
         platformMenu->insertMenuItem(menuItem, beforeItem);
         beforeItem = menuItem;
@@ -1312,7 +1304,7 @@ void QMenu::initStyleOption(QStyleOptionMenuItem *option, const QAction *action)
     do not support the signals: aboutToHide (), aboutToShow () and hovered ().
     It is not possible to display an icon in a native menu on Windows Mobile.
 
-    \section1 QMenu on Mac OS X with Qt build against Cocoa
+    \section1 QMenu on Mac OS X with Qt Build Against Cocoa
 
     QMenu can be inserted only once in a menu/menubar. Subsequent insertions will
     have no effect or will result in a disabled menu item.
@@ -2978,8 +2970,17 @@ static void copyActionToPlatformItem(const QAction *action, QPlatformMenuItem* i
 {
     item->setText(action->text());
     item->setIsSeparator(action->isSeparator());
-    if (action->isIconVisibleInMenu())
+    if (action->isIconVisibleInMenu()) {
         item->setIcon(action->icon());
+        if (QWidget *w = action->parentWidget()) {
+            QStyleOption opt;
+            opt.init(w);
+            item->setIconSize(w->style()->pixelMetric(QStyle::PM_SmallIconSize, &opt, w));
+        } else {
+            QStyleOption opt;
+            item->setIconSize(qApp->style()->pixelMetric(QStyle::PM_SmallIconSize, &opt, 0));
+        }
+    }
     item->setVisible(action->isVisible());
     item->setShortcut(action->shortcut());
     item->setCheckable(action->isCheckable());
diff --git a/src/widgets/widgets/qmenu.h b/src/widgets/widgets/qmenu.h
index fef7903278..937f6e3316 100644
--- a/src/widgets/widgets/qmenu.h
+++ b/src/widgets/widgets/qmenu.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmenu_p.h b/src/widgets/widgets/qmenu_p.h
index 71bf33e1ce..4a4518671c 100644
--- a/src/widgets/widgets/qmenu_p.h
+++ b/src/widgets/widgets/qmenu_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmenu_wince.cpp b/src/widgets/widgets/qmenu_wince.cpp
index a82cc4abb9..a6922ddbc7 100644
--- a/src/widgets/widgets/qmenu_wince.cpp
+++ b/src/widgets/widgets/qmenu_wince.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmenu_wince_resource_p.h b/src/widgets/widgets/qmenu_wince_resource_p.h
index 3ecf05a02a..206cb5c52e 100644
--- a/src/widgets/widgets/qmenu_wince_resource_p.h
+++ b/src/widgets/widgets/qmenu_wince_resource_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmenubar.cpp b/src/widgets/widgets/qmenubar.cpp
index f523ac2777..871af35159 100644
--- a/src/widgets/widgets/qmenubar.cpp
+++ b/src/widgets/widgets/qmenubar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -616,15 +608,15 @@ void QMenuBar::initStyleOption(QStyleOptionMenuItem *option, const QAction *acti
     for items in the menu bar are only shown when the \uicontrol{Alt} key is
     pressed.
 
-    \section1 QMenuBar on Mac OS X
+    \section1 QMenuBar on OS X
 
-    QMenuBar on Mac OS X is a wrapper for using the system-wide menu bar.
+    QMenuBar on OS X is a wrapper for using the system-wide menu bar.
     If you have multiple menu bars in one dialog the outermost menu bar
     (normally inside a widget with widget flag Qt::Window) will
     be used for the system-wide menu bar.
 
-    Qt for Mac OS X also provides a menu bar merging feature to make
-    QMenuBar conform more closely to accepted Mac OS X menu bar layout.
+    Qt for OS X also provides a menu bar merging feature to make
+    QMenuBar conform more closely to accepted OS X menu bar layout.
     The merging functionality is based on string matching the title of
     a QMenu entry. These strings are translated (using QObject::tr())
     in the "QMenuBar" context. If an entry is moved its slots will still
@@ -663,7 +655,7 @@ void QMenuBar::initStyleOption(QStyleOptionMenuItem *option, const QAction *acti
 
     \b{Note:} The text used for the application name in the menu
     bar is obtained from the value set in the \c{Info.plist} file in
-    the application's bundle. See \l{Qt for Mac OS X - Deployment}
+    the application's bundle. See \l{Qt for OS X - Deployment}
     for more information.
 
     \section1 QMenuBar on Windows CE
@@ -908,7 +900,7 @@ void QMenuBar::setActiveAction(QAction *act)
 /*!
     Removes all the actions from the menu bar.
 
-    \note On Mac OS X, menu items that have been merged to the system
+    \note On OS X, menu items that have been merged to the system
     menu bar are not removed by this function. One way to handle this
     would be to remove the extra actions yourself. You can set the
     \l{QAction::MenuRole}{menu role} on the different menus, so that
@@ -1806,7 +1798,7 @@ QWidget *QMenuBar::cornerWidget(Qt::Corner corner) const
     \since 4.6
 
     This property specifies whether or not the menubar should be used as a native menubar on platforms
-    that support it. The currently supported platforms are Mac OS X and Windows CE. On these platforms
+    that support it. The currently supported platforms are OS X and Windows CE. On these platforms
     if this property is \c true, the menubar is used in the native menubar and is not in the window of
     its parent, if false the menubar remains in the window. On other platforms the value of this
     attribute has no effect.
diff --git a/src/widgets/widgets/qmenubar.h b/src/widgets/widgets/qmenubar.h
index 60eebee4d4..cd2d2cd7aa 100644
--- a/src/widgets/widgets/qmenubar.h
+++ b/src/widgets/widgets/qmenubar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qmenubar_p.h b/src/widgets/widgets/qmenubar_p.h
index 817df945c5..fe156f16d2 100644
--- a/src/widgets/widgets/qmenubar_p.h
+++ b/src/widgets/widgets/qmenubar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qplaintextedit.cpp b/src/widgets/widgets/qplaintextedit.cpp
index 8f0fff3d5c..b6a21f183a 100644
--- a/src/widgets/widgets/qplaintextedit.cpp
+++ b/src/widgets/widgets/qplaintextedit.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -690,10 +682,9 @@ void QPlainTextEditPrivate::ensureVisible(int position, bool center, bool forceC
     QRectF br = control->blockBoundingRect(block);
     if (!br.isValid())
         return;
-    QRectF lr = br;
     QTextLine line = block.layout()->lineForTextPosition(position - block.position());
     Q_ASSERT(line.isValid());
-    lr = line.naturalTextRect().translated(br.topLeft());
+    QRectF lr = line.naturalTextRect().translated(br.topLeft());
 
     if (lr.bottom() >= visible.bottom() || (center && lr.top() < visible.top()) || forceCenter){
 
@@ -2278,11 +2269,8 @@ void QPlainTextEdit::wheelEvent(QWheelEvent *e)
     Q_D(QPlainTextEdit);
     if (!(d->control->textInteractionFlags() & Qt::TextEditable)) {
         if (e->modifiers() & Qt::ControlModifier) {
-            const int delta = e->delta();
-            if (delta < 0)
-                zoomOut();
-            else if (delta > 0)
-                zoomIn();
+            float delta = e->angleDelta().y() / 120.f;
+            zoomInF(delta);
             return;
         }
     }
@@ -2302,12 +2290,7 @@ void QPlainTextEdit::wheelEvent(QWheelEvent *e)
 */
 void QPlainTextEdit::zoomIn(int range)
 {
-    QFont f = font();
-    const int newSize = f.pointSize() + range;
-    if (newSize <= 0)
-        return;
-    f.setPointSize(newSize);
-    setFont(f);
+    zoomInF(range);
 }
 
 /*!
@@ -2323,7 +2306,22 @@ void QPlainTextEdit::zoomIn(int range)
 */
 void QPlainTextEdit::zoomOut(int range)
 {
-    zoomIn(-range);
+    zoomInF(-range);
+}
+
+/*!
+    \internal
+*/
+void QPlainTextEdit::zoomInF(float range)
+{
+    if (range == 0.f)
+        return;
+    QFont f = font();
+    const float newSize = f.pointSizeF() + range;
+    if (newSize <= 0)
+        return;
+    f.setPointSizeF(newSize);
+    setFont(f);
 }
 
 #ifndef QT_NO_CONTEXTMENU
@@ -2538,6 +2536,8 @@ void QPlainTextEdit::setReadOnly(bool ro)
     }
     setAttribute(Qt::WA_InputMethodEnabled, shouldEnableInputMethod(this));
     d->control->setTextInteractionFlags(flags);
+    QEvent event(QEvent::ReadOnlyChange);
+    QApplication::sendEvent(this, &event);
 }
 
 /*!
diff --git a/src/widgets/widgets/qplaintextedit.h b/src/widgets/widgets/qplaintextedit.h
index 54cd3e14ed..9f67aaa8da 100644
--- a/src/widgets/widgets/qplaintextedit.h
+++ b/src/widgets/widgets/qplaintextedit.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -271,6 +263,7 @@ protected:
     QRectF blockBoundingGeometry(const QTextBlock &block) const;
     QAbstractTextDocumentLayout::PaintContext getPaintContext() const;
 
+    void zoomInF(float range);
 
 private:
     Q_DISABLE_COPY(QPlainTextEdit)
diff --git a/src/widgets/widgets/qplaintextedit_p.h b/src/widgets/widgets/qplaintextedit_p.h
index 3585b8307f..6ab8b90a0d 100644
--- a/src/widgets/widgets/qplaintextedit_p.h
+++ b/src/widgets/widgets/qplaintextedit_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qprogressbar.cpp b/src/widgets/widgets/qprogressbar.cpp
index 123cb5bd6e..5501247973 100644
--- a/src/widgets/widgets/qprogressbar.cpp
+++ b/src/widgets/widgets/qprogressbar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qprogressbar.h b/src/widgets/widgets/qprogressbar.h
index 2f66aaad9e..2cdcbccdb3 100644
--- a/src/widgets/widgets/qprogressbar.h
+++ b/src/widgets/widgets/qprogressbar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qpushbutton.cpp b/src/widgets/widgets/qpushbutton.cpp
index 264123abf0..84a0afd0b8 100644
--- a/src/widgets/widgets/qpushbutton.cpp
+++ b/src/widgets/widgets/qpushbutton.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qpushbutton.h b/src/widgets/widgets/qpushbutton.h
index 7806e96763..ebf66f8ef8 100644
--- a/src/widgets/widgets/qpushbutton.h
+++ b/src/widgets/widgets/qpushbutton.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qpushbutton_p.h b/src/widgets/widgets/qpushbutton_p.h
index 142df04825..0f5e9a9796 100644
--- a/src/widgets/widgets/qpushbutton_p.h
+++ b/src/widgets/widgets/qpushbutton_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qradiobutton.cpp b/src/widgets/widgets/qradiobutton.cpp
index 7bc57df12b..3ce620ede2 100644
--- a/src/widgets/widgets/qradiobutton.cpp
+++ b/src/widgets/widgets/qradiobutton.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qradiobutton.h b/src/widgets/widgets/qradiobutton.h
index 104d4a12e0..0bfb0de4e8 100644
--- a/src/widgets/widgets/qradiobutton.h
+++ b/src/widgets/widgets/qradiobutton.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -73,6 +65,7 @@ protected:
 private:
     Q_DECLARE_PRIVATE(QRadioButton)
     Q_DISABLE_COPY(QRadioButton)
+    friend class QAccessibleButton;
 };
 
 QT_END_NAMESPACE
diff --git a/src/widgets/widgets/qrubberband.cpp b/src/widgets/widgets/qrubberband.cpp
index ea58d45e46..2a425c27db 100644
--- a/src/widgets/widgets/qrubberband.cpp
+++ b/src/widgets/widgets/qrubberband.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qrubberband.h b/src/widgets/widgets/qrubberband.h
index b603415d1a..7193f69f59 100644
--- a/src/widgets/widgets/qrubberband.h
+++ b/src/widgets/widgets/qrubberband.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qscrollarea.cpp b/src/widgets/widgets/qscrollarea.cpp
index 71c0b987a4..682a7337f6 100644
--- a/src/widgets/widgets/qscrollarea.cpp
+++ b/src/widgets/widgets/qscrollarea.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qscrollarea.h b/src/widgets/widgets/qscrollarea.h
index db1083f122..568dbc6e4f 100644
--- a/src/widgets/widgets/qscrollarea.h
+++ b/src/widgets/widgets/qscrollarea.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qscrollarea_p.h b/src/widgets/widgets/qscrollarea_p.h
index 919d1c8df2..c9cddfaa06 100644
--- a/src/widgets/widgets/qscrollarea_p.h
+++ b/src/widgets/widgets/qscrollarea_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qscrollbar.cpp b/src/widgets/widgets/qscrollbar.cpp
index 5060ca0a70..5851020379 100644
--- a/src/widgets/widgets/qscrollbar.cpp
+++ b/src/widgets/widgets/qscrollbar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qscrollbar.h b/src/widgets/widgets/qscrollbar.h
index 27d0169b40..2b67f04850 100644
--- a/src/widgets/widgets/qscrollbar.h
+++ b/src/widgets/widgets/qscrollbar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qscrollbar_p.h b/src/widgets/widgets/qscrollbar_p.h
index 5fc714d530..d91f3a11d3 100644
--- a/src/widgets/widgets/qscrollbar_p.h
+++ b/src/widgets/widgets/qscrollbar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qsizegrip.cpp b/src/widgets/widgets/qsizegrip.cpp
index 5994071bfc..184aa37806 100644
--- a/src/widgets/widgets/qsizegrip.cpp
+++ b/src/widgets/widgets/qsizegrip.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qsizegrip.h b/src/widgets/widgets/qsizegrip.h
index 11dadfa306..61b397e2bb 100644
--- a/src/widgets/widgets/qsizegrip.h
+++ b/src/widgets/widgets/qsizegrip.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qslider.cpp b/src/widgets/widgets/qslider.cpp
index 0ff31af630..b3f1db3403 100644
--- a/src/widgets/widgets/qslider.cpp
+++ b/src/widgets/widgets/qslider.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qslider.h b/src/widgets/widgets/qslider.h
index a8d7019c1f..6d7bf7eee8 100644
--- a/src/widgets/widgets/qslider.h
+++ b/src/widgets/widgets/qslider.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qspinbox.cpp b/src/widgets/widgets/qspinbox.cpp
index e198dae168..e8b22151fa 100644
--- a/src/widgets/widgets/qspinbox.cpp
+++ b/src/widgets/widgets/qspinbox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qspinbox.h b/src/widgets/widgets/qspinbox.h
index 98e809e141..b2044a64e6 100644
--- a/src/widgets/widgets/qspinbox.h
+++ b/src/widgets/widgets/qspinbox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qsplashscreen.cpp b/src/widgets/widgets/qsplashscreen.cpp
index db9db68039..d6b94803d7 100644
--- a/src/widgets/widgets/qsplashscreen.cpp
+++ b/src/widgets/widgets/qsplashscreen.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qsplashscreen.h b/src/widgets/widgets/qsplashscreen.h
index e675c2e7af..bb8b359831 100644
--- a/src/widgets/widgets/qsplashscreen.h
+++ b/src/widgets/widgets/qsplashscreen.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qsplitter.cpp b/src/widgets/widgets/qsplitter.cpp
index 1f29af319a..661a608b97 100644
--- a/src/widgets/widgets/qsplitter.cpp
+++ b/src/widgets/widgets/qsplitter.cpp
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1609,7 +1601,7 @@ QByteArray QSplitter::saveState() const
     }
     stream << list;
     stream << childrenCollapsible();
-    stream << qint32(handleWidth());
+    stream << qint32(d->handleWidth);
     stream << opaqueResize();
     stream << qint32(orientation());
     stream << d->opaqueResizeSet;
diff --git a/src/widgets/widgets/qsplitter.h b/src/widgets/widgets/qsplitter.h
index ed4102d31e..f82c06c3bc 100644
--- a/src/widgets/widgets/qsplitter.h
+++ b/src/widgets/widgets/qsplitter.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qsplitter_p.h b/src/widgets/widgets/qsplitter_p.h
index 0d0e134f58..738ada02cb 100644
--- a/src/widgets/widgets/qsplitter_p.h
+++ b/src/widgets/widgets/qsplitter_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qstackedwidget.cpp b/src/widgets/widgets/qstackedwidget.cpp
index 6dbc7c8fad..fd1bf57321 100644
--- a/src/widgets/widgets/qstackedwidget.cpp
+++ b/src/widgets/widgets/qstackedwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qstackedwidget.h b/src/widgets/widgets/qstackedwidget.h
index a147577ba6..af048bc749 100644
--- a/src/widgets/widgets/qstackedwidget.h
+++ b/src/widgets/widgets/qstackedwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qstatusbar.cpp b/src/widgets/widgets/qstatusbar.cpp
index 7b1d66cf0d..e4a2df15e7 100644
--- a/src/widgets/widgets/qstatusbar.cpp
+++ b/src/widgets/widgets/qstatusbar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qstatusbar.h b/src/widgets/widgets/qstatusbar.h
index 4a5b1ee494..d24680ab2a 100644
--- a/src/widgets/widgets/qstatusbar.h
+++ b/src/widgets/widgets/qstatusbar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtabbar.cpp b/src/widgets/widgets/qtabbar.cpp
index 789ec2f6fd..982cc40b3d 100644
--- a/src/widgets/widgets/qtabbar.cpp
+++ b/src/widgets/widgets/qtabbar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -588,6 +580,16 @@ void QTabBarPrivate::makeVisible(int index)
     }
 }
 
+void QTabBarPrivate::killSwitchTabTimer()
+{
+    Q_Q(QTabBar);
+    if (switchTabTimerId) {
+        q->killTimer(switchTabTimerId);
+        switchTabTimerId = 0;
+    }
+    switchTabCurrentIndex = -1;
+}
+
 void QTabBarPrivate::layoutTab(int index)
 {
     Q_Q(QTabBar);
@@ -632,6 +634,14 @@ void QTabBarPrivate::layoutWidgets(int start)
     }
 }
 
+void QTabBarPrivate::autoHideTabs()
+{
+    Q_Q(QTabBar);
+
+    if (autoHide)
+        q->setVisible(q->count() > 1);
+}
+
 void QTabBarPrivate::_q_closeTab()
 {
     Q_Q(QTabBar);
@@ -861,6 +871,7 @@ int QTabBar::insertTab(int index, const QIcon& icon, const QString &text)
     }
 
     tabInserted(index);
+    d->autoHideTabs();
     return index;
 }
 
@@ -936,6 +947,7 @@ void QTabBar::removeTab(int index)
             setCurrentIndex(d->currentIndex - 1);
         }
         d->refresh();
+        d->autoHideTabs();
         tabRemoved(index);
     }
 }
@@ -1517,6 +1529,26 @@ bool QTabBar::event(QEvent *event)
     } else if (event->type() == QEvent::Move) {
         d->updateMacBorderMetrics();
         return QWidget::event(event);
+
+#ifndef QT_NO_DRAGANDDROP
+    } else if (event->type() == QEvent::DragEnter) {
+        if (d->changeCurrentOnDrag)
+            event->accept();
+    } else if (event->type() == QEvent::DragMove) {
+        if (d->changeCurrentOnDrag) {
+            const int tabIndex = tabAt(static_cast<QDragMoveEvent *>(event)->pos());
+            if (isTabEnabled(tabIndex) && d->switchTabCurrentIndex != tabIndex) {
+                d->switchTabCurrentIndex = tabIndex;
+                if (d->switchTabTimerId)
+                    killTimer(d->switchTabTimerId);
+                d->switchTabTimerId = startTimer(style()->styleHint(QStyle::SH_TabBar_ChangeCurrentDelay));
+            }
+            event->ignore();
+        }
+    } else if (event->type() == QEvent::DragLeave || event->type() == QEvent::Drop) {
+        d->killSwitchTabTimer();
+        event->ignore();
+#endif
     }
     return QWidget::event(event);
 }
@@ -2035,6 +2067,21 @@ void QTabBar::changeEvent(QEvent *event)
 }
 
 /*!
+    \reimp
+*/
+void QTabBar::timerEvent(QTimerEvent *event)
+{
+    Q_D(QTabBar);
+    if (event->timerId() == d->switchTabTimerId) {
+        killTimer(d->switchTabTimerId);
+        d->switchTabTimerId = 0;
+        setCurrentIndex(d->switchTabCurrentIndex);
+        d->switchTabCurrentIndex = -1;
+    }
+    QWidget::timerEvent(event);
+}
+
+/*!
     \property QTabBar::elideMode
     \brief how to elide text in the tab bar
     \since 4.2
@@ -2267,6 +2314,62 @@ void QTabBar::setDocumentMode(bool enabled)
 }
 
 /*!
+    \property QTabBar::autoHide
+    \brief If true, the tab bar is automatically hidden when it contains less
+    than 2 tabs.
+    \since 5.4
+
+    By default, this property is false.
+
+    \sa QWidget::visible
+*/
+
+bool QTabBar::autoHide() const
+{
+    Q_D(const QTabBar);
+    return d->autoHide;
+}
+
+void QTabBar::setAutoHide(bool hide)
+{
+    Q_D(QTabBar);
+    if (d->autoHide == hide)
+        return;
+
+    d->autoHide = hide;
+    if (hide)
+        d->autoHideTabs();
+    else
+        setVisible(true);
+}
+
+/*!
+    \property QTabBar::changeCurrentOnDrag
+    \brief If true, then the current tab is automatically changed when dragging
+    over the tabbar.
+    \since 5.4
+
+    \note You should also set acceptDrops property to true to make this feature
+    work.
+
+    By default, this property is false.
+*/
+
+bool QTabBar::changeCurrentOnDrag() const
+{
+    Q_D(const QTabBar);
+    return d->changeCurrentOnDrag;
+}
+
+void QTabBar::setChangeCurrentOnDrag(bool change)
+{
+    Q_D(QTabBar);
+    d->changeCurrentOnDrag = change;
+    if (!change)
+        d->killSwitchTabTimer();
+}
+
+/*!
     Sets \a widget on the tab \a index.  The widget is placed
     on the left or right hand side depending upon the \a position.
     \since 4.5
diff --git a/src/widgets/widgets/qtabbar.h b/src/widgets/widgets/qtabbar.h
index a0e52c2f86..bdc9dae07c 100644
--- a/src/widgets/widgets/qtabbar.h
+++ b/src/widgets/widgets/qtabbar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -70,6 +62,8 @@ class Q_WIDGETS_EXPORT QTabBar: public QWidget
     Q_PROPERTY(bool expanding READ expanding WRITE setExpanding)
     Q_PROPERTY(bool movable READ isMovable WRITE setMovable)
     Q_PROPERTY(bool documentMode READ documentMode WRITE setDocumentMode)
+    Q_PROPERTY(bool autoHide READ autoHide WRITE setAutoHide)
+    Q_PROPERTY(bool changeCurrentOnDrag READ changeCurrentOnDrag WRITE setChangeCurrentOnDrag)
 
 public:
     explicit QTabBar(QWidget* parent=0);
@@ -166,6 +160,12 @@ public:
     bool documentMode() const;
     void setDocumentMode(bool set);
 
+    bool autoHide() const;
+    void setAutoHide(bool hide);
+
+    bool changeCurrentOnDrag() const;
+    void setChangeCurrentOnDrag(bool change);
+
 public Q_SLOTS:
     void setCurrentIndex(int index);
 
@@ -196,6 +196,7 @@ protected:
 #endif
     void keyPressEvent(QKeyEvent *);
     void changeEvent(QEvent *);
+    void timerEvent(QTimerEvent *event);
     void initStyleOption(QStyleOptionTab *option, int tabIndex) const;
 
 #ifndef QT_NO_ACCESSIBILITY
diff --git a/src/widgets/widgets/qtabbar_p.h b/src/widgets/widgets/qtabbar_p.h
index 3228308bc6..b26ad20f1a 100644
--- a/src/widgets/widgets/qtabbar_p.h
+++ b/src/widgets/widgets/qtabbar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -77,7 +69,8 @@ public:
         :currentIndex(-1), pressedIndex(-1), shape(QTabBar::RoundedNorth), layoutDirty(false),
         drawBase(true), scrollOffset(0), elideModeSetByUser(false), useScrollButtonsSetByUser(false), expanding(true), closeButtonOnTabs(false),
         selectionBehaviorOnRemove(QTabBar::SelectRightTab), paintWithOffsets(true), movable(false),
-        dragInProgress(false), documentMode(false), movingTab(0)
+        dragInProgress(false), documentMode(false), autoHide(false), changeCurrentOnDrag(false),
+        switchTabCurrentIndex(-1), switchTabTimerId(0), movingTab(0)
 #ifdef Q_WS_MAC
         , previousPressedIndex(-1)
 #endif
@@ -184,6 +177,7 @@ public:
     void updateMacBorderMetrics();
     bool isTabInMacUnifiedToolbarArea() const;
     void setupMovableTab();
+    void autoHideTabs();
 
     void makeVisible(int index);
     QSize iconSize;
@@ -201,6 +195,11 @@ public:
     bool movable;
     bool dragInProgress;
     bool documentMode;
+    bool autoHide;
+    bool changeCurrentOnDrag;
+
+    int switchTabCurrentIndex;
+    int switchTabTimerId;
 
     QWidget *movingTab;
 #ifdef Q_WS_MAC
@@ -240,6 +239,8 @@ public:
         }
     }
 
+    void killSwitchTabTimer();
+
 };
 
 class CloseButton : public QAbstractButton
diff --git a/src/widgets/widgets/qtabwidget.cpp b/src/widgets/widgets/qtabwidget.cpp
index fced1c01ec..414f92d57d 100644
--- a/src/widgets/widgets/qtabwidget.cpp
+++ b/src/widgets/widgets/qtabwidget.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1351,6 +1343,29 @@ void QTabWidget::setDocumentMode(bool enabled)
 }
 
 /*!
+    \property QTabWidget::tabBarAutoHide
+    \brief If true, the tab bar is automatically hidden when it contains less
+    than 2 tabs.
+    \since 5.4
+
+    By default, this property is false.
+
+    \sa QWidget::visible
+*/
+
+bool QTabWidget::tabBarAutoHide() const
+{
+    Q_D(const QTabWidget);
+    return d->tabs->autoHide();
+}
+
+void QTabWidget::setTabBarAutoHide(bool enabled)
+{
+    Q_D(QTabWidget);
+    return d->tabs->setAutoHide(enabled);
+}
+
+/*!
     Removes all the pages, but does not delete them. Calling this function
     is equivalent to calling removeTab() until the tab widget is empty.
 */
diff --git a/src/widgets/widgets/qtabwidget.h b/src/widgets/widgets/qtabwidget.h
index 83c2e31d28..5d9adc40e5 100644
--- a/src/widgets/widgets/qtabwidget.h
+++ b/src/widgets/widgets/qtabwidget.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,6 +60,7 @@ class Q_WIDGETS_EXPORT QTabWidget : public QWidget
     Q_PROPERTY(bool documentMode READ documentMode WRITE setDocumentMode)
     Q_PROPERTY(bool tabsClosable READ tabsClosable WRITE setTabsClosable)
     Q_PROPERTY(bool movable READ isMovable WRITE setMovable)
+    Q_PROPERTY(bool tabBarAutoHide READ tabBarAutoHide WRITE setTabBarAutoHide)
 
 public:
     explicit QTabWidget(QWidget *parent = 0);
@@ -140,6 +133,9 @@ public:
     bool documentMode() const;
     void setDocumentMode(bool set);
 
+    bool tabBarAutoHide() const;
+    void setTabBarAutoHide(bool enabled);
+
     void clear();
 
     QTabBar* tabBar() const;
diff --git a/src/widgets/widgets/qtextbrowser.cpp b/src/widgets/widgets/qtextbrowser.cpp
index 9ecc87aac4..1ef2f92804 100644
--- a/src/widgets/widgets/qtextbrowser.cpp
+++ b/src/widgets/widgets/qtextbrowser.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtextbrowser.h b/src/widgets/widgets/qtextbrowser.h
index 244d8a32df..d08590cb27 100644
--- a/src/widgets/widgets/qtextbrowser.h
+++ b/src/widgets/widgets/qtextbrowser.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtextedit.cpp b/src/widgets/widgets/qtextedit.cpp
index a33ac0817f..2d95009eb3 100644
--- a/src/widgets/widgets/qtextedit.cpp
+++ b/src/widgets/widgets/qtextedit.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -1813,11 +1805,8 @@ void QTextEdit::wheelEvent(QWheelEvent *e)
     Q_D(QTextEdit);
     if (!(d->control->textInteractionFlags() & Qt::TextEditable)) {
         if (e->modifiers() & Qt::ControlModifier) {
-            const int delta = e->delta();
-            if (delta < 0)
-                zoomOut();
-            else if (delta > 0)
-                zoomIn();
+            float delta = e->angleDelta().y() / 120.f;
+            zoomInF(delta);
             return;
         }
     }
@@ -2122,6 +2111,8 @@ void QTextEdit::setReadOnly(bool ro)
     }
     d->control->setTextInteractionFlags(flags);
     setAttribute(Qt::WA_InputMethodEnabled, shouldEnableInputMethod(this));
+    QEvent event(QEvent::ReadOnlyChange);
+    QApplication::sendEvent(this, &event);
 }
 
 /*!
@@ -2274,12 +2265,7 @@ void QTextEdit::scrollToAnchor(const QString &name)
 */
 void QTextEdit::zoomIn(int range)
 {
-    QFont f = font();
-    const int newSize = f.pointSize() + range;
-    if (newSize <= 0)
-        return;
-    f.setPointSize(newSize);
-    setFont(f);
+    zoomInF(range);
 }
 
 /*!
@@ -2295,7 +2281,22 @@ void QTextEdit::zoomIn(int range)
 */
 void QTextEdit::zoomOut(int range)
 {
-    zoomIn(-range);
+    zoomInF(-range);
+}
+
+/*!
+    \internal
+*/
+void QTextEdit::zoomInF(float range)
+{
+    if (range == 0.f)
+        return;
+    QFont f = font();
+    const float newSize = f.pointSizeF() + range;
+    if (newSize <= 0)
+        return;
+    f.setPointSizeF(newSize);
+    setFont(f);
 }
 
 /*!
diff --git a/src/widgets/widgets/qtextedit.h b/src/widgets/widgets/qtextedit.h
index a283a51b90..dc8deea8b6 100644
--- a/src/widgets/widgets/qtextedit.h
+++ b/src/widgets/widgets/qtextedit.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -304,6 +296,8 @@ protected:
     virtual void scrollContentsBy(int dx, int dy);
     virtual void doSetTextCursor(const QTextCursor &cursor);
 
+    void zoomInF(float range);
+
 private:
     Q_DISABLE_COPY(QTextEdit)
     Q_PRIVATE_SLOT(d_func(), void _q_repaintContents(const QRectF &r))
diff --git a/src/widgets/widgets/qtextedit_p.h b/src/widgets/widgets/qtextedit_p.h
index daa6eb5ed0..0fd7d66c35 100644
--- a/src/widgets/widgets/qtextedit_p.h
+++ b/src/widgets/widgets/qtextedit_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbar.cpp b/src/widgets/widgets/qtoolbar.cpp
index 1c05529cd6..17e64be4f4 100644
--- a/src/widgets/widgets/qtoolbar.cpp
+++ b/src/widgets/widgets/qtoolbar.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -720,6 +712,10 @@ void QToolBar::setIconSize(const QSize &iconSize)
     as \l{QAction}s. Note that if you add a QToolButton with the
     addWidget() method, it will not get this button style.
 
+    To have the style of toolbuttons follow the system settings, set this property to Qt::ToolButtonFollowStyle.
+    On Unix, the user settings from the desktop environment will be used.
+    On other platforms, Qt::ToolButtonFollowStyle means icon only.
+
     The default is Qt::ToolButtonIconOnly.
 */
 
diff --git a/src/widgets/widgets/qtoolbar.h b/src/widgets/widgets/qtoolbar.h
index fbe509f522..6bd1411592 100644
--- a/src/widgets/widgets/qtoolbar.h
+++ b/src/widgets/widgets/qtoolbar.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbar_p.h b/src/widgets/widgets/qtoolbar_p.h
index c9dd0490cd..5678a3114b 100644
--- a/src/widgets/widgets/qtoolbar_p.h
+++ b/src/widgets/widgets/qtoolbar_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbararealayout.cpp b/src/widgets/widgets/qtoolbararealayout.cpp
index 4591c2ac5f..5494d49232 100644
--- a/src/widgets/widgets/qtoolbararealayout.cpp
+++ b/src/widgets/widgets/qtoolbararealayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbararealayout_p.h b/src/widgets/widgets/qtoolbararealayout_p.h
index 6ba9768467..63a0924bcb 100644
--- a/src/widgets/widgets/qtoolbararealayout_p.h
+++ b/src/widgets/widgets/qtoolbararealayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbarextension.cpp b/src/widgets/widgets/qtoolbarextension.cpp
index 1e1999d4f3..55d9862f42 100644
--- a/src/widgets/widgets/qtoolbarextension.cpp
+++ b/src/widgets/widgets/qtoolbarextension.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbarextension_p.h b/src/widgets/widgets/qtoolbarextension_p.h
index ccb2e411b0..07e3301ed7 100644
--- a/src/widgets/widgets/qtoolbarextension_p.h
+++ b/src/widgets/widgets/qtoolbarextension_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbarlayout.cpp b/src/widgets/widgets/qtoolbarlayout.cpp
index efd33da7fc..28c64bb6cf 100644
--- a/src/widgets/widgets/qtoolbarlayout.cpp
+++ b/src/widgets/widgets/qtoolbarlayout.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbarlayout_p.h b/src/widgets/widgets/qtoolbarlayout_p.h
index b250f3adee..47857d6802 100644
--- a/src/widgets/widgets/qtoolbarlayout_p.h
+++ b/src/widgets/widgets/qtoolbarlayout_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbarseparator.cpp b/src/widgets/widgets/qtoolbarseparator.cpp
index 140f26eaed..8592207515 100644
--- a/src/widgets/widgets/qtoolbarseparator.cpp
+++ b/src/widgets/widgets/qtoolbarseparator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbarseparator_p.h b/src/widgets/widgets/qtoolbarseparator_p.h
index 8db7205b4f..3ac46db482 100644
--- a/src/widgets/widgets/qtoolbarseparator_p.h
+++ b/src/widgets/widgets/qtoolbarseparator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbox.cpp b/src/widgets/widgets/qtoolbox.cpp
index e29fa18e35..518b975b51 100644
--- a/src/widgets/widgets/qtoolbox.cpp
+++ b/src/widgets/widgets/qtoolbox.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbox.h b/src/widgets/widgets/qtoolbox.h
index 3a15ca1850..1ea276e8ab 100644
--- a/src/widgets/widgets/qtoolbox.h
+++ b/src/widgets/widgets/qtoolbox.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qtoolbutton.cpp b/src/widgets/widgets/qtoolbutton.cpp
index cb441d6c6e..3d3f42605e 100644
--- a/src/widgets/widgets/qtoolbutton.cpp
+++ b/src/widgets/widgets/qtoolbutton.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -384,8 +376,9 @@ QSize QToolButton::minimumSizeHint() const
 
     The default is Qt::ToolButtonIconOnly.
 
-    To have the style of toolbuttons follow the system settings (as available
-    in GNOME and KDE desktop environments), set this property to Qt::ToolButtonFollowStyle.
+    To have the style of toolbuttons follow the system settings, set this property to Qt::ToolButtonFollowStyle.
+    On Unix, the user settings from the desktop environment will be used.
+    On other platforms, Qt::ToolButtonFollowStyle means icon only.
 
     QToolButton automatically connects this slot to the relevant
     signal in the QMainWindow in which is resides.
diff --git a/src/widgets/widgets/qtoolbutton.h b/src/widgets/widgets/qtoolbutton.h
index 3310476b44..922ea09abd 100644
--- a/src/widgets/widgets/qtoolbutton.h
+++ b/src/widgets/widgets/qtoolbutton.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qwidgetanimator.cpp b/src/widgets/widgets/qwidgetanimator.cpp
index a2d950c12b..85eee0e1ee 100644
--- a/src/widgets/widgets/qwidgetanimator.cpp
+++ b/src/widgets/widgets/qwidgetanimator.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qwidgetanimator_p.h b/src/widgets/widgets/qwidgetanimator_p.h
index 776ca74b1f..bbfcc48955 100644
--- a/src/widgets/widgets/qwidgetanimator_p.h
+++ b/src/widgets/widgets/qwidgetanimator_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qwidgetlinecontrol.cpp b/src/widgets/widgets/qwidgetlinecontrol.cpp
index 75f30599be..90fbfc1639 100644
--- a/src/widgets/widgets/qwidgetlinecontrol.cpp
+++ b/src/widgets/widgets/qwidgetlinecontrol.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -355,8 +347,10 @@ void QWidgetLineControl::init(const QString &txt)
     m_text = txt;
     updateDisplayText();
     m_cursor = m_text.length();
-    if (const QPlatformTheme *theme = QGuiApplicationPrivate::platformTheme())
+    if (const QPlatformTheme *theme = QGuiApplicationPrivate::platformTheme()) {
         m_keyboardScheme = theme->themeHint(QPlatformTheme::KeyboardScheme).toInt();
+        m_passwordMaskDelay = theme->themeHint(QPlatformTheme::PasswordMaskDelay).toInt();
+    }
     // Generalize for X11
     if (m_keyboardScheme == QPlatformTheme::KdeKeyboardScheme
         || m_keyboardScheme == QPlatformTheme::GnomeKeyboardScheme
@@ -735,15 +729,15 @@ void QWidgetLineControl::internalSetText(const QString &txt, int pos, bool edite
 #ifndef QT_NO_ACCESSIBILITY
     if (changed) {
         if (oldText.isEmpty()) {
-            QAccessibleTextInsertEvent event(parent(), 0, txt);
+            QAccessibleTextInsertEvent event(accessibleObject(), 0, txt);
             event.setCursorPosition(m_cursor);
             QAccessible::updateAccessibility(&event);
         } else if (txt.isEmpty()) {
-            QAccessibleTextRemoveEvent event(parent(), 0, oldText);
+            QAccessibleTextRemoveEvent event(accessibleObject(), 0, oldText);
             event.setCursorPosition(m_cursor);
             QAccessible::updateAccessibility(&event);
         } else {
-            QAccessibleTextUpdateEvent event(parent(), 0, oldText, txt);
+            QAccessibleTextUpdateEvent event(accessibleObject(), 0, oldText, txt);
             event.setCursorPosition(m_cursor);
             QAccessible::updateAccessibility(&event);
         }
@@ -787,7 +781,7 @@ void QWidgetLineControl::internalInsert(const QString &s)
     if (m_echoMode == QLineEdit::Password) {
         if (m_passwordEchoTimer != 0)
             killTimer(m_passwordEchoTimer);
-        int delay = qGuiApp->styleHints()->passwordMaskDelay();
+        int delay = m_passwordMaskDelay;
 #ifdef QT_BUILD_INTERNAL
         if (m_passwordMaskDelayOverride >= 0)
             delay = m_passwordMaskDelayOverride;
@@ -801,7 +795,7 @@ void QWidgetLineControl::internalInsert(const QString &s)
     if (m_maskData) {
         QString ms = maskString(m_cursor, s);
 #ifndef QT_NO_ACCESSIBILITY
-        QAccessibleTextInsertEvent insertEvent(parent(), m_cursor, ms);
+        QAccessibleTextInsertEvent insertEvent(accessibleObject(), m_cursor, ms);
         QAccessible::updateAccessibility(&insertEvent);
 #endif
         for (int i = 0; i < (int) ms.length(); ++i) {
@@ -813,14 +807,14 @@ void QWidgetLineControl::internalInsert(const QString &s)
         m_cursor = nextMaskBlank(m_cursor);
         m_textDirty = true;
 #ifndef QT_NO_ACCESSIBILITY
-        QAccessibleTextCursorEvent event(parent(), m_cursor);
+        QAccessibleTextCursorEvent event(accessibleObject(), m_cursor);
         QAccessible::updateAccessibility(&event);
 #endif
     } else {
         int remaining = m_maxLength - m_text.length();
         if (remaining != 0) {
 #ifndef QT_NO_ACCESSIBILITY
-            QAccessibleTextInsertEvent insertEvent(parent(), m_cursor, s);
+            QAccessibleTextInsertEvent insertEvent(accessibleObject(), m_cursor, s);
             QAccessible::updateAccessibility(&insertEvent);
 #endif
             m_text.insert(m_cursor, s.left(remaining));
@@ -851,7 +845,7 @@ void QWidgetLineControl::internalDelete(bool wasBackspace)
         addCommand(Command((CommandType)((m_maskData ? 2 : 0) + (wasBackspace ? Remove : Delete)),
                    m_cursor, m_text.at(m_cursor), -1, -1));
 #ifndef QT_NO_ACCESSIBILITY
-        QAccessibleTextRemoveEvent event(parent(), m_cursor, m_text.at(m_cursor));
+        QAccessibleTextRemoveEvent event(accessibleObject(), m_cursor, m_text.at(m_cursor));
         QAccessible::updateAccessibility(&event);
 #endif
         if (m_maskData) {
@@ -892,7 +886,7 @@ void QWidgetLineControl::removeSelectedText()
                 addCommand (Command(RemoveSelection, i, m_text.at(i), -1, -1));
         }
 #ifndef QT_NO_ACCESSIBILITY
-        QAccessibleTextRemoveEvent event(parent(), m_selstart, m_text.mid(m_selstart, m_selend - m_selstart));
+        QAccessibleTextRemoveEvent event(accessibleObject(), m_selstart, m_text.mid(m_selstart, m_selend - m_selstart));
         QAccessible::updateAccessibility(&event);
 #endif
         if (m_maskData) {
@@ -1382,7 +1376,7 @@ void QWidgetLineControl::emitCursorPositionChanged()
 #ifndef QT_NO_ACCESSIBILITY
         // otherwise we send a selection update which includes the cursor
         if (!hasSelectedText()) {
-            QAccessibleTextCursorEvent event(parent(), m_cursor);
+            QAccessibleTextCursorEvent event(accessibleObject(), m_cursor);
             QAccessible::updateAccessibility(&event);
         }
 #endif
@@ -1676,7 +1670,7 @@ void QWidgetLineControl::processKeyEvent(QKeyEvent* event)
         }
     }
     else if (event == QKeySequence::Cut) {
-        if (!isReadOnly()) {
+        if (!isReadOnly() && hasSelectedText()) {
             copy();
             del();
         }
diff --git a/src/widgets/widgets/qwidgetlinecontrol_p.h b/src/widgets/widgets/qwidgetlinecontrol_p.h
index 1cee67bfd2..328faf7926 100644
--- a/src/widgets/widgets/qwidgetlinecontrol_p.h
+++ b/src/widgets/widgets/qwidgetlinecontrol_p.h
@@ -1,46 +1,38 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
-#ifndef QWidgetLineControl_P_H
-#define QWidgetLineControl_P_H
+#ifndef QWIDGETLINECONTROL_P_H
+#define QWIDGETLINECONTROL_P_H
 
 //
 //  W A R N I N G
@@ -90,6 +82,7 @@ public:
         m_tripleClickTimer(0), m_maskData(0), m_modifiedState(0), m_undoState(0),
         m_selstart(0), m_selend(0), m_passwordEchoEditing(false)
         , m_passwordEchoTimer(0)
+        , m_passwordMaskDelay(-1)
 #if defined(Q_WS_MAC)
         , m_threadChecks(false)
         , m_textLayoutThread(0)
@@ -98,6 +91,7 @@ public:
         , m_passwordMaskDelayOverride(-1)
 #endif
         , m_keyboardScheme(0)
+        , m_accessibleObject(0)
     {
         init(txt);
     }
@@ -107,6 +101,19 @@ public:
         delete [] m_maskData;
     }
 
+    void setAccessibleObject(QObject *object)
+    {
+        Q_ASSERT(object);
+        m_accessibleObject = object;
+    }
+
+    QObject *accessibleObject()
+    {
+        if (m_accessibleObject)
+            return m_accessibleObject;
+        return parent();
+    }
+
     int nextMaskBlank(int pos)
     {
         int c = findInMask(pos, true, false);
@@ -313,6 +320,9 @@ public:
     QChar passwordCharacter() const { return m_passwordCharacter; }
     void setPasswordCharacter(QChar character) { m_passwordCharacter = character; updateDisplayText(); }
 
+    int passwordMaskDelay() const { return m_passwordMaskDelay; }
+    void setPasswordMaskDelay(int delay) { m_passwordMaskDelay = delay; }
+
     Qt::LayoutDirection layoutDirection() const {
         if (m_layoutDirection == Qt::LayoutDirectionAuto) {
             if (m_text.isEmpty())
@@ -481,6 +491,7 @@ private:
     bool m_passwordEchoEditing;
     QChar m_passwordCharacter;
     int m_passwordEchoTimer;
+    int m_passwordMaskDelay;
     void cancelPasswordEchoTimer()
     {
         if (m_passwordEchoTimer != 0) {
@@ -527,10 +538,13 @@ private Q_SLOTS:
 
 private:
     int m_keyboardScheme;
+
+    // accessibility events are sent for this object
+    QObject *m_accessibleObject;
 };
 
 QT_END_NAMESPACE
 
 #endif // QT_NO_LINEEDIT
 
-#endif // QWidgetLineControl_P_H
+#endif // QWIDGETLINECONTROL_P_H
diff --git a/src/widgets/widgets/qwidgetresizehandler.cpp b/src/widgets/widgets/qwidgetresizehandler.cpp
index ba4e69126a..13ec0fba7a 100644
--- a/src/widgets/widgets/qwidgetresizehandler.cpp
+++ b/src/widgets/widgets/qwidgetresizehandler.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,6 +50,10 @@ QT_BEGIN_NAMESPACE
 static bool resizeHorizontalDirectionFixed = false;
 static bool resizeVerticalDirectionFixed = false;
 
+// ### fixme: Qt 6: No longer export QWidgetResizeHandler and remove "Move"
+// functionality. Currently, only the resize functionality is used by QDockWidget.
+// Historically, the class was used in Qt 3's QWorkspace (predecessor to QMdiArea).
+
 QWidgetResizeHandler::QWidgetResizeHandler(QWidget *parent, QWidget *cw)
     : QObject(parent), widget(parent), childWidget(cw ? cw : parent),
       fw(0), extrahei(0), buttonDown(false), moveResizeMode(false), sizeprotect(true), movingEnabled(true)
diff --git a/src/widgets/widgets/qwidgetresizehandler_p.h b/src/widgets/widgets/qwidgetresizehandler_p.h
index 6ace370e9d..5b165aa7be 100644
--- a/src/widgets/widgets/qwidgetresizehandler_p.h
+++ b/src/widgets/widgets/qwidgetresizehandler_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qwidgettextcontrol.cpp b/src/widgets/widgets/qwidgettextcontrol.cpp
index 96438a0bdf..4c11434fe9 100644
--- a/src/widgets/widgets/qwidgettextcontrol.cpp
+++ b/src/widgets/widgets/qwidgettextcontrol.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -645,13 +637,15 @@ void QWidgetTextControlPrivate::_q_emitCursorPosChanged(const QTextCursor &someC
 
 void QWidgetTextControlPrivate::_q_contentsChanged(int from, int charsRemoved, int charsAdded)
 {
-    Q_Q(QWidgetTextControl);
 #ifndef QT_NO_ACCESSIBILITY
+    Q_Q(QWidgetTextControl);
 
     if (QAccessible::isActive() && q->parent() && q->parent()->isWidgetType()) {
         QTextCursor tmp(doc);
         tmp.setPosition(from);
-        tmp.setPosition(from + charsAdded, QTextCursor::KeepAnchor);
+        // when setting a new text document the length is off
+        // QTBUG-32583 - characterCount is off by 1 requires the -1
+        tmp.setPosition(qMin(doc->characterCount() - 1, from + charsAdded), QTextCursor::KeepAnchor);
         QString newText = tmp.selectedText();
 
         // always report the right number of removed chars, but in lack of the real string use spaces
@@ -668,6 +662,10 @@ void QWidgetTextControlPrivate::_q_contentsChanged(int from, int charsRemoved, i
         QAccessible::updateAccessibility(ev);
         delete ev;
     }
+#else
+    Q_UNUSED(from)
+    Q_UNUSED(charsRemoved)
+    Q_UNUSED(charsAdded)
 #endif
 }
 
diff --git a/src/widgets/widgets/qwidgettextcontrol_p.h b/src/widgets/widgets/qwidgettextcontrol_p.h
index 867b55fe32..949201e8a8 100644
--- a/src/widgets/widgets/qwidgettextcontrol_p.h
+++ b/src/widgets/widgets/qwidgettextcontrol_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/qwidgettextcontrol_p_p.h b/src/widgets/widgets/qwidgettextcontrol_p_p.h
index 4d578c76f8..8b3b6f7864 100644
--- a/src/widgets/widgets/qwidgettextcontrol_p_p.h
+++ b/src/widgets/widgets/qwidgettextcontrol_p_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtWidgets module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/widgets/widgets/widgets.pri b/src/widgets/widgets/widgets.pri
index a924ba9acc..342d2093db 100644
--- a/src/widgets/widgets/widgets.pri
+++ b/src/widgets/widgets/widgets.pri
@@ -8,7 +8,6 @@ HEADERS += \
         widgets/qabstractslider_p.h \
         widgets/qabstractspinbox.h \
         widgets/qabstractspinbox_p.h \
-        widgets/qcalendartextnavigator_p.h \
         widgets/qcalendarwidget.h \
         widgets/qcheckbox.h \
         widgets/qcombobox.h \
diff --git a/src/winmain/qtmain_win.cpp b/src/winmain/qtmain_win.cpp
index dc765ea56a..778ddee64b 100644
--- a/src/winmain/qtmain_win.cpp
+++ b/src/winmain/qtmain_win.cpp
@@ -1,6 +1,6 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the Windows main function of the Qt Toolkit.
@@ -43,6 +43,10 @@
 #include "qstring.h"
 #include "qvector.h"
 
+#ifndef Q_OS_WINCE
+#  include <shlobj.h>
+#endif
+
 /*
   This file contains the code in the qtmain library for Windows.
   qtmain contains the Windows startup code and is required for
@@ -83,26 +87,49 @@ extern "C" int main(int, char **);
   application.
 */
 
-#ifdef Q_OS_WINCE
+#ifndef Q_OS_WINCE
+
+// Convert a wchar_t to char string, equivalent to QString::toLocal8Bit()
+// when passed CP_ACP.
+static inline char *wideToMulti(int codePage, const wchar_t *aw)
+{
+    const int required = WideCharToMultiByte(codePage, 0, aw, -1, NULL, 0, NULL, NULL);
+    char *result = new char[required];
+    WideCharToMultiByte(codePage, 0, aw, -1, result, required, NULL, NULL);
+    return result;
+}
+
+extern "C" int APIENTRY WinMain(HINSTANCE, HINSTANCE, LPSTR /*cmdParamarg*/, int /* cmdShow */)
+{
+    int argc;
+    wchar_t **argvW = CommandLineToArgvW(GetCommandLineW(), &argc);
+    if (!argvW)
+        return -1;
+    char **argv = new char *[argc];
+    for (int i = 0; i < argc; ++i)
+        argv[i] = wideToMulti(CP_ACP, argvW[i]);
+    LocalFree(argvW);
+    const int exitCode = main(argc, argv);
+    for (int i = 0; i < argc; ++i)
+        delete [] argv[i];
+    delete [] argv;
+    return exitCode;
+}
+
+#else // !Q_OS_WINCE
+
 int WINAPI WinMain(HINSTANCE instance, HINSTANCE prevInstance, LPWSTR /*wCmdParam*/, int cmdShow)
-#else
-extern "C"
-int APIENTRY WinMain(HINSTANCE instance, HINSTANCE prevInstance, LPSTR /*cmdParamarg*/, int cmdShow)
-#endif
 {
     QByteArray cmdParam = QString::fromWCharArray(GetCommandLine()).toLocal8Bit();
 
-#if defined(Q_OS_WINCE)
     wchar_t appName[MAX_PATH];
     GetModuleFileName(0, appName, MAX_PATH);
     cmdParam.prepend(QString(QLatin1String("\"%1\" ")).arg(QString::fromWCharArray(appName)).toLocal8Bit());
-#endif
 
     int argc = 0;
     QVector<char *> argv(8);
     qWinMain(instance, prevInstance, cmdParam.data(), cmdShow, argc, argv);
 
-#if defined(Q_OS_WINCE)
     wchar_t uniqueAppID[MAX_PATH];
     GetModuleFileName(0, uniqueAppID, MAX_PATH);
     QString uid = QString::fromWCharArray(uniqueAppID).toLower().replace(QLatin1String("\\"), QLatin1String("_"));
@@ -126,11 +153,10 @@ int APIENTRY WinMain(HINSTANCE instance, HINSTANCE prevInstance, LPSTR /*cmdPara
             SetForegroundWindow((HWND)(((ULONG)aHwnd) | 0x01));
         return 0;
     }
-#endif // Q_OS_WINCE
 
     int result = main(argc, argv.data());
-#if defined(Q_OS_WINCE)
     CloseHandle(mutex);
-#endif
     return result;
 }
+
+#endif // Q_OS_WINCE
diff --git a/src/winmain/qtmain_winrt.cpp b/src/winmain/qtmain_winrt.cpp
index bcb3445bcd..43bce0862a 100644
--- a/src/winmain/qtmain_winrt.cpp
+++ b/src/winmain/qtmain_winrt.cpp
@@ -67,6 +67,7 @@ extern "C" {
 #include <qvector.h>
 #include <qdir.h>
 #include <qstandardpaths.h>
+#include <qthread.h>
 
 #include <wrl.h>
 #include <Windows.ApplicationModel.core.h>
@@ -237,6 +238,9 @@ int __stdcall WinMain(HINSTANCE, HINSTANCE, LPSTR, int)
     if (FAILED(RoInitialize(RO_INIT_MULTITHREADED)))
         return 1;
 
+    // Mark the main thread
+    QThread::currentThread();
+
     Core::ICoreApplication *appFactory;
     if (FAILED(RoGetActivationFactory(qHString(CoreApplicationClass), IID_PPV_ARGS(&appFactory))))
         return 2;
diff --git a/src/winmain/winmain.pro b/src/winmain/winmain.pro
index 5e658fa7e1..b891e4bce0 100644
--- a/src/winmain/winmain.pro
+++ b/src/winmain/winmain.pro
@@ -20,6 +20,8 @@ winrt {
     SOURCES = qtmain_winrt.cpp
 } else {
     SOURCES = qtmain_win.cpp
+
+    !wince: LIBS += -lshell32
 }
 
 load(qt_installs)
diff --git a/src/xml/doc/qtxml.qdocconf b/src/xml/doc/qtxml.qdocconf
index 1e3b534be5..8ca421ff4e 100644
--- a/src/xml/doc/qtxml.qdocconf
+++ b/src/xml/doc/qtxml.qdocconf
@@ -2,7 +2,6 @@ include($QT_INSTALL_DOCS/global/qt-module-defaults.qdocconf)
 
 project                 = QtXml
 description             = Qt XML Reference Documentation
-url                     = http://qt-project.org/doc/qt-$QT_VER
 version                 = $QT_VERSION
 
 examplesinstallpath     = xml
diff --git a/src/xml/dom/qdom.cpp b/src/xml/dom/qdom.cpp
index 5907a72bd6..1fcbe607e4 100644
--- a/src/xml/dom/qdom.cpp
+++ b/src/xml/dom/qdom.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtXml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/xml/dom/qdom.h b/src/xml/dom/qdom.h
index f1c04a422d..7c5dc7f137 100644
--- a/src/xml/dom/qdom.h
+++ b/src/xml/dom/qdom.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtXml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/xml/qtxmlglobal.h b/src/xml/qtxmlglobal.h
index c7209ad054..3fd17330c8 100644
--- a/src/xml/qtxmlglobal.h
+++ b/src/xml/qtxmlglobal.h
@@ -5,36 +5,28 @@
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/xml/sax/qxml.cpp b/src/xml/sax/qxml.cpp
index 50900c17f0..bedb0ba689 100644
--- a/src/xml/sax/qxml.cpp
+++ b/src/xml/sax/qxml.cpp
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtXml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -5265,7 +5257,12 @@ bool QXmlSimpleReaderPrivate::parsePEReference()
                                 return false;
                             }
                             if (ret) {
-                                xmlRefString = ret->data();
+                                QString buffer = ret->data();
+                                while (!buffer.isEmpty()) {
+                                    xmlRefString += buffer;
+                                    ret->fetchData();
+                                    buffer = ret->data();
+                                }
                                 delete ret;
                                 if (!stripTextDecl(xmlRefString)) {
                                     reportParseError(QLatin1String(XMLERR_ERRORINTEXTDECL));
@@ -7614,7 +7611,14 @@ bool QXmlSimpleReaderPrivate::processReference()
                                     return false;
                                 }
                                 if (ret) {
-                                    QString xmlRefString = ret->data();
+                                    QString xmlRefString;
+                                    QString buffer = ret->data();
+                                    while (!buffer.isEmpty()) {
+                                        xmlRefString += buffer;
+                                        ret->fetchData();
+                                        buffer = ret->data();
+                                    }
+
                                     delete ret;
                                     if (!stripTextDecl(xmlRefString)) {
                                         reportParseError(QLatin1String(XMLERR_ERRORINTEXTDECL));
diff --git a/src/xml/sax/qxml.h b/src/xml/sax/qxml.h
index 2f276f75c6..d583388856 100644
--- a/src/xml/sax/qxml.h
+++ b/src/xml/sax/qxml.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtXml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/src/xml/sax/qxml_p.h b/src/xml/sax/qxml_p.h
index 1cb919a554..01ab528185 100644
--- a/src/xml/sax/qxml_p.h
+++ b/src/xml/sax/qxml_p.h
@@ -1,40 +1,32 @@
 /****************************************************************************
 **
-** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
+** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the QtXml module of the Qt Toolkit.
 **
-** $QT_BEGIN_LICENSE:LGPL$
+** $QT_BEGIN_LICENSE:LGPL21$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.  For licensing terms and
-** conditions see http://qt.digia.com/licensing.  For further information
+** a written agreement between you and Digia. For licensing terms and
+** conditions see http://qt.digia.com/licensing. For further information
 ** use the contact form at http://qt.digia.com/contact-us.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+** General Public License version 2.1 or version 3 as published by the Free
+** Software Foundation and appearing in the file LICENSE.LGPLv21 and
+** LICENSE.LGPLv3 included in the packaging of this file. Please review the
+** following information to ensure the GNU Lesser General Public License
+** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
 ** In addition, as a special exception, Digia gives you certain additional
-** rights.  These rights are described in the Digia Qt LGPL Exception
+** rights. These rights are described in the Digia Qt LGPL Exception
 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-**
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/